COAL PREPARATION PLANT COMPUTER MODEL: VOLUME I. USER DOCUMENTATION

EPA Science Inventory

The two-volume report describes a steady state modeling system that simulates the performance of coal preparation plants. The system was developed originally under the technical leadership of the U.S. Bureau of Mines and the sponsorship of the EPA. The modified form described in ...

3D-micro-patterned fibrous dosage forms for immediate drug release.

PubMed

Blaesi, Aron H; Saka, Nannaji

2018-03-01

At present, the most prevalent pharmaceutical dosage forms, the orally-delivered immediate-release tablets and capsules, are porous, granular solids. They disintegrate into their constituent particulates upon ingestion to release drug rapidly. The design, development, and manufacture of such granular solids, however, is inefficient due to difficulties associated with the unpredictable inter-particle interactions. Therefore, to achieve more predictable dosage form properties and processing, we have recently introduced melt-processed polymeric cellular dosage forms. The cellular forms disintegrated and released drug rapidly if the cells were predominantly interconnected. Preparation of interconnected cells, however, relies on the coalescence of gas bubbles in the melt, which is unpredictable. In the present work, therefore, new melt-processed fibrous dosage forms with contiguous void space are presented. The dosage forms are prepared by melt extrusion of the drug-excipient mixture followed by patterning the fibrous extrudate on a moving surface. It is demonstrated that the resulting fibrous structures are fully predictable by the extruder nozzle diameter and the motion of the surface. Furthermore, drug release experiments show that the disintegration time of the fibrous forms prepared in this work is of the order of that of the corresponding single fibers. The thin fibers of polyethylene glycol (excipient) and acetaminophen (drug) in turn disintegrate in a time proportional to the fiber radius and well within immediate-release specification. Finally, models of dosage form disintegration and drug release by single fibers and fibrous dosage forms are developed. It is found that drug release from fibrous forms is predictable by the physico-chemical properties of the excipient and such microstructural parameters as the fiber radius, the inter-fiber spacing, and the volume fraction of water-soluble excipient in the fibers. Copyright © 2017 Elsevier B.V. All rights reserved.

[Microfungicid--a preparation based on trichoderma viride for plant diseases control].

PubMed

Kolombet, L V; Zhigletsova, S K; Derbyshev, V V; Ezhov, D V; Kosareva, N I; Bystrova, E V

2001-01-01

A technology was designed for manufacturing a preparation based on Trichoderma viride Pers ex S.F. Gray that strongly suppresses the development of causative agents of certain plant diseases and displays a growth-stimulating activity. Cultivation of the strain in a liquid medium for 18-24 h produced up to 60 g dry biomass per liter nutrient medium. A marketable form created in this work conserves the activity of the mycelial preparation for six months. The preparation is compatible with insecticides (carbofos, vismetrin, talstar, and applaud) and certain fungicides (such as baitan). Tests performed with the liquid form of Mycofungicid (seeds were treated with this preparation at a dose of 20-30 g per metric ton before sowing) showed its high efficiency in protecting cereal crops from plant pathogens. The incidence of plant diseases decreased by 65%, and crop yields increased by 15-20%.

Final report on cermet high-level waste forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kobisk, E.H.; Quinby, T.C.; Aaron, W.S.

1981-08-01

Cermets are being developed as an alternate method for the fixation of defense and commercial high level radioactive waste in a terminal disposal form. Following initial feasibility assessments of this waste form, consisting of ceramic particles dispersed in an iron-nickel base alloy, significantly improved processing methods were developed. The characterization of cermets has continued through property determinations on samples prepared by various methods from a variety of simulated and actual high-level wastes. This report describes the status of development of the cermet waste form as it has evolved since 1977. 6 tables, 18 figures.

Investigation of MgF2 optical thin films with ultralow refractive indices prepared from autoclaved sols.

PubMed

Murata, Tsuyoshi; Ishizawa, Hitoshi; Tanaka, Akira

2008-05-01

We have successfully developed a process to form high quality MgF(2) thin films with ultralow refractive indices from autoclaved sols prepared from magnesium acetate and hydrofluoric acid. And we have confirmed that our porous MgF(2) coatings have not only high transmittance in the UV region but also high uniformity of film thickness. They can be uniformly formed on phiv 300 mm substrates as a single coating and as a hybrid coating with sublayers formed by physical vapor deposition. They are expected to be applied to various optics that need high transmittance in the UV region.

Manual for Preparing Individualized Education Programs.

ERIC Educational Resources Information Center

Baylor, Terrill D.

Presented are guidelines for developing an individualized program and services plan, an individual implementation plan, and daily activity and strategy plans for handicapped students. Instructions are outlined for utilizing forms related to planning and implementation of individualized education programs. Appended are sample forms. (SBH)

Secondary Waste Simulant Development for Cast Stone Formulation Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Russell, Renee L.; Westsik, Joseph H.; Rinehart, Donald E.

Washington River Protection Solutions, LLC (WRPS) funded Pacific Northwest National Laboratory (PNNL) to conduct a waste form testing program to implement aspects of the Secondary Liquid Waste Treatment Cast Stone Technology Development Plan (Ashley 2012) and the Hanford Site Secondary Waste Roadmap (PNNL 2009) related to the development and qualification of Cast Stone as a potential waste form for the solidification of aqueous wastes from the Hanford Site after the aqueous wastes are treated at the Effluent Treatment Facility (ETF). The current baseline is that the resultant Cast Stone (or grout) solid waste forms would be disposed at the Integratedmore » Disposal Facility (IDF). Data and results of this testing program will be used in the upcoming performance assessment of the IDF and in the design and operation of a solidification treatment unit planned to be added to the ETF. The purpose of the work described in this report is to 1) develop simulants for the waste streams that are currently being fed and future WTP secondary waste streams also to be fed into the ETF and 2) prepare simulants to use for preparation of grout or Cast Stone solid waste forms for testing.« less

Forming Collaborative Partnerships on a Statewide Level to Develop Quality School Leaders

ERIC Educational Resources Information Center

Goduto, Leonard R.; Doolittle, Gini; Leake, Donald

2008-01-01

In 2004, the New Jersey Department of Education mandated that all leadership preparation programs in the state align with the Interstate School Leadership Licensure Consortia standards. In response, 17 preparation programs established a chapter of the National Council of Professors of Educational Administration. In this article, we describe how…

The Preparation of a Piano Repertoire According to Elliot's Musical Knowledge Model: Three Case Studies

ERIC Educational Resources Information Center

Teixeira dos Santos, Regina Antunes; Hentschke, Liane

2010-01-01

In academic education, undergraduate students develop musical knowledge through the preparation of a repertoire within the western classical music tradition during a certain period of formal music practice. During the practice, the student makes choices and deals with personal strategies that assume forms of thinking and, therefore, differentiated…

Preparing Educational Technology Leaders: Reflections on the Past, Present, and Future

ERIC Educational Resources Information Center

Dennen, Vanessa P.; Spector, J. Michael

2007-01-01

The field of educational technology is continuously changing to reflect the increasingly global workplace and development of new technologies and standards. Are educational technology programs keeping up? Are they, in their present form, able to address the evolving needs of the workplace and prepare the next generation of educational technology…

Preparation of active 3D film patches via aligned fiber electrohydrodynamic (EHD) printing

NASA Astrophysics Data System (ADS)

Wang, Jun-Chuan; Zheng, Hongxia; Chang, Ming-Wei; Ahmad, Zeeshan; Li, Jing-Song

2017-03-01

The design, preparation and application of three-dimensional (3D) printed structures have gained appreciable interest in recent times, particularly for drug dosage development. In this study, the electrohydrodynamic (EHD) printing technique was developed to fabricate aligned-fiber antibiotic (tetracycline hydrochloride, TE-HCL) patches using polycaprolactone (PCL), polyvinyl pyrrolidone (PVP) and their composite system (PVP-PCL). Drug loaded 3D patches possessed perfectly aligned fibers giving rise to fibrous strut orientation, variable inter-strut pore size and controlled film width (via layering). The effect of operating parameters on fiber deposition and alignment were explored, and the impact of the film structure, composition and drug loading was evaluated. FTIR demonstrated successful TE-HCL encapsulation in aligned fibers. Patches prepared using PVP and TE-HCL displayed enhanced hydrophobicity. Tensile tests exhibited changes to mechanical properties arising from additive effects. Release of antibiotic from PCL-PVP dosage forms was shown over 5 days and was slower compared to pure PCL or PVP. The printed patch void size also influenced antibiotic release behavior. The EHDA printing technique provides an exciting opportunity to tailor dosage forms in a single-step with minimal excipients and operations. These developments are crucial to meet demands where dosage forms cannot be manufactured rapidly or when a personalized approach is required.

Preparation of active 3D film patches via aligned fiber electrohydrodynamic (EHD) printing

PubMed Central

Wang, Jun-Chuan; Zheng, Hongxia; Chang, Ming-Wei; Ahmad, Zeeshan; Li, Jing-Song

2017-01-01

The design, preparation and application of three-dimensional (3D) printed structures have gained appreciable interest in recent times, particularly for drug dosage development. In this study, the electrohydrodynamic (EHD) printing technique was developed to fabricate aligned-fiber antibiotic (tetracycline hydrochloride, TE-HCL) patches using polycaprolactone (PCL), polyvinyl pyrrolidone (PVP) and their composite system (PVP-PCL). Drug loaded 3D patches possessed perfectly aligned fibers giving rise to fibrous strut orientation, variable inter-strut pore size and controlled film width (via layering). The effect of operating parameters on fiber deposition and alignment were explored, and the impact of the film structure, composition and drug loading was evaluated. FTIR demonstrated successful TE-HCL encapsulation in aligned fibers. Patches prepared using PVP and TE-HCL displayed enhanced hydrophobicity. Tensile tests exhibited changes to mechanical properties arising from additive effects. Release of antibiotic from PCL-PVP dosage forms was shown over 5 days and was slower compared to pure PCL or PVP. The printed patch void size also influenced antibiotic release behavior. The EHDA printing technique provides an exciting opportunity to tailor dosage forms in a single-step with minimal excipients and operations. These developments are crucial to meet demands where dosage forms cannot be manufactured rapidly or when a personalized approach is required. PMID:28272513

48 CFR 719.271-6 - Small business screening procedure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Small business screening... DEVELOPMENT SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Policies 719.271-6 Small business screening...) Preparation of Form USAID 1410-14 (the Small Business/Minority Business Enterprise Procurement Review Form...

Improvement of enalapril maleate chemical stability by high shear melting granulation.

PubMed

de Oliveira, Ana Paula Montandon; Cunha, Talita Amorim; Serpa, Raphael Caixeta; Taveira, Stephânia Fleury; Lima, Eliana Martins; Almeida Diniz, Danielle Guimarães; de Freitas, Luis Alexandre Pedro; Marreto, Ricardo Neves

2014-09-18

Abstract Enalapril maleate is a widely used drug, which is chemically unstable when mixed with excipients resulting in enalaprilat and diketopiperazine as the main degradation products. The preparation of enalapril sodium salt has been used to improve drug stability in solid dosage forms; however, product rejection is observed when the chemical reaction for obtaining the sodium salt is not completely finished before packaging. In this study, granules were prepared by melting granulation using stearic acid or glyceryl monostearate, with a view to developing more stable enalapril maleate solid dosage forms. The granules were prepared in a laboratory-scale high shear mixer and compressed in a rotary machine. Size distribution, flow properties, in vitro drug release and enalapril maleate chemical stability were evaluated and compared with data obtained from tablets prepared without hydrophobic binders. All formulations showed good physical properties and immediate drug release. The greatest improvement in the enalapril maleate stability was observed in formulations containing stearic acid. This study showed that hot melting granulation could be successfully used to prepare enalapril maleate granules which could substitute the in situ formation of enalapril sodium salt, since they provided better enalapril stability in solid dosage forms.

ICCS 2009 European Report: Civic Knowledge, Attitudes, and Engagement among Lower-Secondary Students in 24 European Countries

ERIC Educational Resources Information Center

Kerr, David; Sturman, Linda; Schulz, Wolfram; Burge, Bethan

2010-01-01

The International Civic and Citizenship Education Study (ICCS) studied the ways in which countries prepare their young people to undertake their roles as citizens. ICCS was based on the premise that preparing students for citizenship involves helping them develop relevant knowledge and understanding and form positive attitudes toward being a…

System Would Acquire Core and Powder Samples of Rocks

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph; Randolph, James; Bao, Xiaoqi; Sherrit, Stewart; Ritz, Chuck; Cook, Greg

2006-01-01

A system for automated sampling of rocks, ice, and similar hard materials at and immediately below the surface of the ground is undergoing development. The system, denoted a sample preparation, acquisition, handling, and delivery (SPAHD) device, would be mounted on a robotic exploratory vehicle that would traverse the terrain of interest on the Earth or on a remote planet. The SPAHD device would probe the ground to obtain data for optimization of sampling, prepare the surface, acquire samples in the form(s) of cores and/or powdered cuttings, and deliver the samples to a selected location for analysis and/or storage.

Boehringer Ingleheim's selective glucocorticoid receptor agonist development candidate: evaluation of WO2010141331, WO2010141332 and WO2010141333.

PubMed

Norman, Peter

2011-07-01

Three applications from Boehringer Ingelheim all relate to the preparation of non-steroidal glucocorticoid receptor agonists useful in the treatment of inflammatory respiratory diseases. The first two applications claim chiral processes for the preparation of these compounds or intermediates useful therein. These provide two alternative routes, respectively, using achiral and chiral reagents. The third application relates to the preparation of a crystalline salt of the preferred compound on a multi-kilogram scale in micronised form.

Processable Aromatic Polyimide Thermoplastic Blends

NASA Technical Reports Server (NTRS)

Baucom, Robert M; Johnston, Norman J.; St. Clair, Terry L.; Nelson, James B.; Gleason, John R.; Proctor, K. Mason

1988-01-01

Method developed for preparing readily-processable thermoplastic polyimides by blending linear, high-molecular-weight, polyimic acid solutions in ether solvents with ultrafine, semicrystalline, thermoplastic polyimide powders. Slurries formed used to make prepregs. Consolidation of prepregs into finsihed composites characterized by excellent melt flow during processing. Applied to film, fiber, fabric, metal, polymer, or composite surfaces. Used to make various stable slurries from which prepregs prepared.

Promoting Professional Development for Physical Therapists in Early Intervention

ERIC Educational Resources Information Center

Catalino, Tricia; Chiarello, Lisa A.; Long, Toby; Weaver, Priscilla

2015-01-01

Early intervention service providers are expected to form cohesive teams to build the capacity of a family to promote their child's development. Given the differences in personnel preparation across disciplines of service providers, the Early Childhood Personnel Center is creating integrated and comprehensive professional development models for…

78 FR 76892 - Proposed Collection; Comment Request for Form W-12

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... W-12 AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and request for comments... Form W-12 IRS Paid Preparer Tax Identification Number (PTIN). DATES: Written comments should be.... Form Number: Form W-12. Abstract: Paid tax return preparers are required to get a preparer tax...

Design and preparation of polymeric scaffolds for tissue engineering.

PubMed

Weigel, Thomas; Schinkel, Gregor; Lendlein, Andreas

2006-11-01

Polymeric scaffolds for tissue engineering can be prepared with a multitude of different techniques. Many diverse approaches have recently been under development. The adaptation of conventional preparation methods, such as electrospinning, induced phase separation of polymer solutions or porogen leaching, which were developed originally for other research areas, are described. In addition, the utilization of novel fabrication techniques, such as rapid prototyping or solid free-form procedures, with their many different methods to generate or to embody scaffold structures or the usage of self-assembly systems that mimic the properties of the extracellular matrix are also described. These methods are reviewed and evaluated with specific regard to their utility in the area of tissue engineering.

Internal Revolutions: Auto-Ethnography as a Method for Faculty Who Prepare K-12 Educators and Leaders at Hispanic Serving Institutions

ERIC Educational Resources Information Center

Aguilar, Israel

2017-01-01

This article reinforces the use of research for faculty who prepare K-12 educators and leaders for social justice. The author conceptualizes auto-ethnography as a form of professional development and maintains that faculty must first experience an internal revolution before they can expect to model it, especially in a Hispanic Serving Institution…

A novel approach for the preparation of highly loaded polymeric controlled release dosage forms of diltiazem HCl and diclofenac sodium.

PubMed

Kakish, Hanan F; Tashtoush, Bassam; Ibrahim, Hussein G; Najib, Naji M

2002-07-01

In this investigation, modified-release dosage forms of diltiazem HCl (DT) and diclofenac sodium (DS) were prepared. The development work comprised two main parts: (a) loading the drug into ethylene vinyl acetate (EVA) polymer, and (b) generation of a non-uniform concentration distribution of the drug within the polymer matrix. Phase separation technique was successfully used to load DT and DS into the polymer at significantly high levels, up to 81 and 76%, respectively. Size diameter of the resultant microspheres was between 1.6 and 2.0mm. Controlled-extraction of loaded microspheres and high vacuum freeze-drying were used to generate the non-uniform concentration distribution and to immobilize the new drug distribution within the matrix. Parameters controlling the different processes were investigated, and hence optimal processing conditions were used to prepare the dosage forms. Rates of drug release from the two dosage forms in water and in media having different pH were found to be constant for an appreciable length of time (>8h) followed by a slow decline; a characteristic of a non-Fickian diffusion process. Scanning electron microscopy studies suggested that the resultant release behavior was the outcome of the combined effects of the non-uniform distribution of the drug in the matrix and the apparent changes in the pores and surface characteristics of the microspheres. Comparison of release rate-time plots of dissolution data of marketed products with the newly developed dosage forms indicated the ability of the latter to sustain more zero order release.

Research Project "Subject Developing Environment of Preschool Education" for Russian Preschool Bilinguals (By the Example of Textile Educational Materials)

ERIC Educational Resources Information Center

Latipova, Liliya A.; Krapotkina, Irene E.; Koudrjavtseva, Ekaterina L.

2016-01-01

The problem's relevance stated in the article is determined by the following: forming preschool bilinguals' subject developing environment is connected with their active education and development, as well as with flexible preparation for studying at school. The purpose of this article is to develop methodology of textile developing materials' use…

Supercritical fluid technologies: an innovative approach for manipulating the solid-state of pharmaceuticals.

PubMed

Pasquali, Irene; Bettini, Ruggero; Giordano, Ferdinando

2008-02-14

Solid-state, crystallographic purity and careful monitoring of the polymorphism of drugs and excipients are currently an integral part of the development of modern drug delivery systems. The reproducible preparation of organic crystals in a specific form and size is a major issue that must be addressed. A recent approach for obtaining pharmaceutical materials in pure physical form is represented by the technologies based on supercritical fluids. The present work aims to provide a critical review of the recent advances in the use of supercritical fluids for the preparation and control of the specific physical form of pharmaceutical substances with particular attention to those fluids used for drug delivery systems. These innovative technologies are highly promising for future application in particle design and engineering.

Choice of excipients for gelly-like pulp prepared ex tempore "on a spoon"- "placebo" and with sartans.

PubMed

Wolska, Eliza; Kluk, Anna; Zarazińska, Magda; Boniecka, Magdalena; Sznitowska, Małgorzata

2016-01-01

To ensure safe oral administration, pediatric patients require an appropriate dosage form to be swallowed without relevant difficulties. Ex tempore hydrated powders, forming viscous pulp "on a spoon", have recently gained much interest as pediatric formulations. The aim of this study was to evaluate the viscosity-increasing substances and disintegrants, alone or in mixtures, as excipients suitable for preparing such formulations, with candesartan and valsartan chosen as model active substances. The mixtures of excipients were prepared in the form of powders, granules or lyophilizates, which were evaluated in terms of their ability to form a homogenous mass after hydration with a small amount of water. The best compositions were tested with candesartan cilexetil and valsartan (2% and 10% w/w, respectively). Performed studies include macroscopic, organoleptic and microscopic observations, as well as a textural analysis, determination of gelation time and rheological measurements. Mixtures of guar gum, lactose and one of the disintegrants (F-Melt M, Prosolv 50, Prosolv Easy, Lycatab, Pharmaburst, Pearlitol) demonstrated the best properties. With regard to drug-incorporating formulations, granules were evaluated as the most satisfying form, while the functional properties of lyophilized formulations were poor. Granules with candesartan cilexetil (2%) were found to be the most promising for further development.

17 CFR 230.480 - Title of securities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... REGULATIONS, SECURITIES ACT OF 1933 Investment Companies; Business Development Companies § 230.480 Title of securities. If a registration statement is prepared on a form available solely to investment companies registered under the Investment Company Act of 1940, or a business development company which is selling or...

Development of ion beam sputtering techniques for actinide target preparation

NASA Astrophysics Data System (ADS)

Aaron, W. S.; Zevenbergen, L. A.; Adair, H. L.

1985-06-01

Ion beam sputtering is a routine method for the preparation of thin films used as targets because it allows the use of a minimum quantity of starting material, and losses are much lower than most other vacuum deposition techniques. Work is underway in the Isotope Research Materials Laboratory (IRML) at ORNL to develop the techniques that will make the preparation of actinide targets up to 100 μg/cm 2 by ion beam sputtering a routinely available service from IRML. The preparation of the actinide material in a form suitable for sputtering is a key to this technique, as is designing a sputtering system that allows the flexibility required for custom-ordered target production. At present, development work is being conducted on low-activity actinides in a bench-top system. The system will then be installed in a hood or glove box approved for radioactive materials handling where processing of radium, actinium, and plutonium isotopes among others will be performed.

THE PREPARATION OF CURRICULUM MATERIALS AND THE DEVELOPMENT OF TEACHERS FOR AN EXPERIMENTAL APPLICATION OF THE CLUSTER CONCEPT OF VOCATIONAL EDUCATION AT THE SECONDARY SCHOOL LEVEL. VOLUME III, INSTRUCTIONAL PLANS FOR THE METAL FORMING AND FABRICATION CLUSTER.

ERIC Educational Resources Information Center

MALEY, DONALD

DESIGNED FOR USE WITH 11TH AND 12TH GRADE STUDENTS, THIS CURRICULUM GUIDE FOR THE OCCUPATIONAL CLUSTER IN METAL FORMING AND FABRICATION WAS DEVELOPED BY PARTICIPATING TEACHERS FROM RESULTS OF THE RESEARCH PROCEDURES DESCRIBED IN VOLUME I (VT 004 162). THE COURSE DESCRIPTION, NEED FOR THE COURSE, COURSE OBJECTIVES, PROCEDURES AND INSTRUCTIONAL PLAN…

Development of a Novel Synthetic Drug for Osteoporosis and Fracture Healing

DTIC Science & Technology

2012-09-01

application to chondrosarcoma , and preparation for bone fracture study. Body Aim 1: Development of salubrinal formulations and determination of...development of bone marrow derived cells, osteoclasts, osteoblasts, and chondrocytes. Application to chondrosarcoma : Besides osteoporosis and...osteoarthritis, we considered a potential application of salubrinal to skeletal malignancies. Approximately one-third of skeletal cancers form chondrosarcoma

DEVELOPMENT OF PROCEDURES FOR DERIVING TRAINING OBJECTIVES FOR JUNIOR OFFICER JOBS.

ERIC Educational Resources Information Center

AMMERMAN, HARRY L.

A SYSTEMATIC METHOD WAS DEVELOPED TO BE USED BY SERVICE SCHOOL PERSONNEL IN PREPARING JOB-ORIENTED TRAINING OBJECTIVES FOR JUNIOR OFFICERS, PRIMARILY IN THE FORM OF BEHAVIORAL STATEMENTS OF PERFORMANCE EXPECTED AFTER TRAINING. THE PROCEDURES DEVELOPED WERE (1) LISTING ALL TASKS FOR A JOB, (2) SELECTING TASKS FOR SOME FORMAL TRAINING, (3)…

Automated generation of a World Wide Web-based data entry and check program for medical applications.

PubMed

Kiuchi, T; Kaihara, S

1997-02-01

The World Wide Web-based form is a promising method for the construction of an on-line data collection system for clinical and epidemiological research. It is, however, laborious to prepare a common gateway interface (CGI) program for each project, which the World Wide Web server needs to handle the submitted data. In medicine, it is even more laborious because the CGI program must check deficits, type, ranges, and logical errors (bad combination of data) of entered data for quality assurance as well as data length and meta-characters of the entered data to enhance the security of the server. We have extended the specification of the hypertext markup language (HTML) form to accommodate information necessary for such data checking and we have developed software named AUTOFORM for this purpose. The software automatically analyzes the extended HTML form and generates the corresponding ordinary HTML form, 'Makefile', and C source of CGI programs. The resultant CGI program checks the entered data through the HTML form, records them in a computer, and returns them to the end-user. AUTOFORM drastically reduces the burden of development of the World Wide Web-based data entry system and allows the CGI programs to be more securely and reliably prepared than had they been written from scratch.

A freeze-dried injectable form of ibuprofen: development and optimisation using response surface methodology.

PubMed

Kagkadis, K A; Rekkas, D M; Dallas, P P; Choulis, N H

1996-01-01

In this study a complex of Ibuprofen and b-Hydroxypropylcyclodextrin was prepared employing a freeze drying method. The production parameters and the final specifications of this product were optimized by using response surface methodology. The results show that the freeze dried complex meets the requirements for solubility to be considered as a possible injectable form.

Development of formulation device for periodontal disease.

PubMed

Sato, Yasuhiko; Oba, Takuma; Watanabe, Norio; Danjo, Kazumi

2012-01-01

In addition to providing standard surgical treatment that removes the plaque and infected tissues, medications that can regenerate periodontal tissue are also required in the treatment of periodontal disease. As a form of regenerative medication, various growth factors are expected to be used while treating periodontal disease. A protein-like growth factor is often developed as a lyophilized product with dissolution liquid, considering its instability in the solution state. We have clarified that the formulation for periodontal disease needs to be viscous. When the lyophilized product was dissolved using a sticky solution, various problems were encountered, difficulty in dissolving and air bubbles, for example, and some efforts were needed to prepare the formulation. In this research, to identify the problem of preparing a viscous formulation, a lyophilized product (placebo) and sticky liquid were prepared by using vial and ampoule as the conventional containers. Based on these problems, a prototype administration device was developed, and its functionality was confirmed. As a result, it was suggested that the device with a useful mixing system that could shorten the preparation time was developed.

Development of iron phosphate ceramic waste form to immobilize radioactive waste solution

NASA Astrophysics Data System (ADS)

Choi, Jongkwon; Um, Wooyong; Choung, Sungwook

2014-09-01

The objective of this research was to develop an iron phosphate ceramic (IPC) waste form using converter slag obtained as a by-product of the steel industry as a source of iron instead of conventional iron oxide. Both synthetic off-gas scrubber solution containing technetium-99 (or Re as a surrogate) and LiCl-KCl eutectic salt, a final waste solution from pyrochemical processing of spent nuclear fuel, were used as radioactive waste streams. The IPC waste form was characterized for compressive strength, reduction capacity, chemical durability, and contaminant leachability. Compressive strengths of the IPC waste form prepared with different types of waste solutions were 16 MPa and 19 MPa for LiCl-KCl eutectic salt and the off-gas scrubber simulant, respectively, which meet the minimum compressive strength of 3.45 MPa (500 psi) for waste forms to be accepted into the radioactive waste repository. The reduction capacity of converter slag, a main dry ingredient used to prepare the IPC waste form, was 4136 meq/kg by the Ce(IV) method, which is much higher than those of the conventional Fe oxides used for the IPC waste form and the blast furnace slag materials. Average leachability indexes of Tc, Li, and K for the IPC waste form were higher than 6.0, and the IPC waste form demonstrated stable durability even after 63-day leaching. In addition, the Toxicity Characteristic Leach Procedure measurements of converter slag and the IPC waste form with LiCl-KCl eutectic salt met the universal treatment standard of the leachability limit for metals regulated by the Resource Conservation and Recovery Act. This study confirms the possibility of development of the IPC waste form using converter slag, showing its immobilization capability for radionuclides in both LiCl-KCl eutectic salt and off-gas scrubber solutions with significant cost savings.

Development of iron phosphate ceramic waste form to immobilize radioactive waste solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choi, Jongkwon; Um, Wooyong; Choung, Sungwook

The objective of this research was to develop an iron phosphate ceramic (IPC) waste form using converter slag obtained as a by-product of the steel industry as a source of iron instead of conventional iron oxide. Both synthetic off-gas scrubber solution containing technetium-99 (or Re as a surrogate) and LiCl-KCl eutectic salt, a final waste solution from pyrochemical processing of spent nuclear fuel, were used as radioactive waste streams. The IPC waste form was characterized for compressive strength, reduction capacity, chemical durability, and contaminant leachability. Compressive strengths of the IPC waste form prepared with different types of waste solutions weremore » 16 MPa and 19 MPa for LiCl-KCl eutectic salt and the off-gas scrubber simulant, respectively, which meet the minimum compressive strength of 3.45 MPa (500 psi) for waste forms to be accepted into the radioactive waste repository. The reduction capacity of converter slag, a main dry ingredient used to prepare the IPC waste form, was 4,136 meq/kg by the Ce(IV) method, which is much higher than those of the conventional Fe oxides used for the IPC waste form and the blast furnace slag materials. Average leachability indexes of Tc, Li, and K for the IPC waste form were higher than 6.0, and the IPC waste form demonstrated stable durability even after 63-day leaching. In addition, the Toxicity Characteristic Leach Procedure measurements of converter slag and the IPC waste form with LiCl-KCl eutectic salt met the universal treatment standard of the leachability limit for metals regulated by the Resource Conservation and Recovery Act. This study confirms the possibility of development of the IPC waste form using converter slag, showing its immobilization capability for radionuclides in both LiCl-KCl eutectic salt and off-gas scrubber solutions with significant cost savings.« less

Preparing Synthetic Aβ in Different Aggregation States

PubMed Central

Stine, W. Blaine; Jungbauer, Lisa; Yu, Chunjiang; LaDu, Mary Jo

2013-01-01

This chapter outlines protocols that produce homogenous preparations of oligomeric and fibrillar amyloid -β peptide (Aβ). While there are several isoforms of this peptide, the 42 amino acid form is the focus because of its genetic and pathological link to Alzheimer’s disease (AD). Past decades of AD research highlight the dependence of Aβ42 function on its structural assembly state. Biochemical, cellular and in vivo studies of Aβ42 usually begin with purified peptide obtained by chemical synthesis or recombinant expression. The initial steps to solubilize and prepare these purified dry peptide stocks are critical to controlling the structural assembly of Aβ. To develop homogenous Aβ42 assemblies, we initially monomerize the peptide, erasing any “structural history” that could seed aggregation, by using a strong solvent. It is this starting material that has allowed us to define and optimize conditions that consistently produce homogenous solutions of soluble oligomeric and fibrillar Aβ42 assemblies. These preparations have been developed and characterized by using atomic force microscopy (AFM) to identify the structurally discrete species formed by Aβ42 under specific solution conditions. These preparations have been used extensively to demonstrate a variety of functional differences between oligomeric and fibrillar Aβ42. We also present a protocol for fluorescently labeling oligomeric Aβ42 that does not affect structure, as measured by AFM, or function, as measured by a cellular uptake assay. These reagents are critical experimental tools that allow for defining specific structure/function connections. PMID:20967580

Bioactivity of freeze-dried platelet-rich plasma in an adsorbed form on a biodegradable polymer material.

PubMed

Nakajima, Yu; Kawase, Tomoyuki; Kobayashi, Mito; Okuda, Kazuhiro; Wolff, Larry F; Yoshie, Hiromasa

2012-01-01

Owing to the necessity for the immediate preparation from patients' blood, autologous platelet-rich plasma (PRP) limits its clinical applicability. To address this concern and respond to emergency care and other unpredictable uses, we have developed a freeze-dried PRP in an adsorbed form on a biodegradable polymer material (Polyglactin 910). On the polymer filaments of PRP mesh, which was prepared by coating the polymer mesh with human fresh PRP and subsequent freeze-drying, platelets were incorporated, and related growth factors were preserved at high levels. This new PRP mesh preparation significantly and reproducibly stimulated the proliferation of human periodontal ligament cells in vitro and neovascularization in a chorioallantoic membrane assay. A full-thickness skin defect model in a diabetic mouse demonstrated the PRP mesh, although prepared from human blood, substantially facilitated angiogenesis, granulation tissue formation, and re-epithelialization without inducing severe inflammation in vivo. These data demonstrate that our new PRP mesh preparation functions as a bioactive material to facilitate tissue repair/regeneration. Therefore, we suggest that this bioactive material, composed of allogeneic PRP, could be clinically used as a promising alternative in emergency care or at times when autologous PRP is not prepared immediately before application.

The synthesis of monomers with pendent ethynyl groups for modified high performance thermoplastics

NASA Technical Reports Server (NTRS)

Nwokogu, Godson C.; Antoine, Miquel D.; Ansong, Omari

1994-01-01

Synthetic schemes were developed and optimized for twelve new monomers possessing unique structural features and one aspartimide. Two synthetic pathways were compared for preparation of the triarylethane monomers with pendent ethynyl groups. The results show that one of these pathways can be generally applied. The alternative pathway was applicable to the preparation of only one of the twelve compounds, the problem being secondary reactions of the initially formed desired product.

Sibling rivalry in nursing and the role of nurse psychotherapist.

PubMed

Harrison, K A

1998-01-01

The burgeoning role of the analytically prepared nurse psychotherapist in Great Britain. To describe the struggles of nurses in this role and ways this struggle might be lessened. Observations of the author, an analytically prepared nurse psychotherapist-in-training in Great Britain. The role of the nurse psychotherapist with psychoanalytic training is in its infancy in Great Britain. Barriers to the development are both external, from outside the nursing profession, and internal, in the form of sibling rivalry or envy from less prepared nurses. Increased communication among nurses is encouraged so that a shared understanding and mutual respect may result.

Particle design using a 4-fluid-nozzle spray-drying technique for sustained release of acetaminophen.

PubMed

Chen, Richer; Okamoto, Hirokazu; Danjo, Kazumi

2006-07-01

We prepared matrix particles of acetaminophen (Act) with chitosan (Cht) as a carrier using a newly developed 4-fluid-nozzle spray dryer. Cht dissolves in acid solutions and forms a gel, but it does not dissolve in alkaline solutions. Therefore, we tested the preparation of controlled release matrix particles using the characteristics of this carrier. Act and Cht mixtures in prescribed ratios were dissolved in an acid solution. We evaluated the matrix particles by preparing a solid dispersion using a 4-fluid-nozzle spray dryer. Observation of the particle morphology by scanning electron microscopy (SEM) revealed that the particles from the spray drying process had atomized to several microns, and that they had become spherical. We investigated the physicochemical properties of the matrix particles by powder X-ray diffraction, differential scanning calorimetry, and dissolution rate analyses with a view to clarifying the effects of crystallinity on the dissolution rate. The powder X-ray diffraction peaks and the heat of the Act fusion in the spray-dried samples decreased with the increase of the carrier content, indicating that the drug was amorphous. These results indicate that the system formed a solid dispersion. Furthermore, we investigated the interaction between the drug and carrier using FT-IR analysis. The FT-IR spectroscopy for the Act solid dispersions suggested that the Act carboxyl group and the Cht amino group formed a hydrogen bond. In addition, the measurement results of the 13C CP/MAS solid-state NMR, indicated that a hydrogen bond had been formed between the Act carbonyl group and the Cht amino group. In the Act-Cht system, the 4-fluid-nozzle spray-dried preparation with a mixing ratio of 1 : 5 obtained a sustained release preparation in all pH test solutions.

Why America Should Develop a Youth Apprenticeship System. Policy Report No. 5.

ERIC Educational Resources Information Center

Lerman, Robert I.; Pouncy, Hillard

Developing a youth apprenticeship in the United States would boost productivity, improve the preparation of youths for the skill demands of a global economy, and simultaneously offer minority youth an avenue into the economic mainstream. Germany's "dual system" of youth apprenticeship could be adopted to form a national skill-building…

The effect of preparation strategies, qualification and professional background on clinical nurse educator confidence.

PubMed

Nguyen, Van N B; Forbes, Helen; Mohebbi, Mohammadreza; Duke, Maxine

2018-06-12

To describe how clinical nurse educators in Vietnam are prepared for their role; to identify which preparation strategies assist development of confidence in clinical teaching; and to measure the effect of educational qualifications and professional background on perceived confidence levels. The quality of clinical teaching can directly affect the quality of the student learning experience. The role of the clinical educator is complex and dynamic and requires a period of adjustment for successful role transition to occur. Planned orientation and specific preparation programs assist transition and reduce anxiety for new clinical nurse educators. There is, however, a lack of clear evidence to identify the form this preparation should take or which strategies are likely to facilitate the development of role confidence. Descriptive survey study. Cross-sectional surveys were used to collect data from 334 clinical nurse educators during January - March 2015. Eight preparation methods commonly used in Vietnam were identified. There was a small yet significant association between preparation and clinical nurse educators' perceived confidence. Formal preparation methods, as well as postgraduate qualifications and years of clinical teaching experience were linked to increased confidence in clinical teaching. Conversely, informal mentorship was found to hinder confidence development. This study identifies several preparation strategies that significantly enhance clinical educator confidence and readiness for their complex role. These preparation strategies drawn from the Vietnamese context, provide important examples for the wider nursing community to consider. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Limited Scope Design Study for Multi-Sensor Towbody

DTIC Science & Technology

2016-06-01

FINAL REPORT Limited Scope Design Study for Multi-Sensor Towbody SERDP Project MR-2501 JUNE 2016 Dr. Kevin Williams Tim McGinnis...prepared under contract to the Department of Defense Strategic Environmental Research and Development Program (SERDP). The publication of this...Left Blank REPORT DOCUMENTATION PAGE Standard Form 298 (Rev. 8/98) Prescribed by ANSI Std. Z39.18 Form Approved OMB No. 0704-0188 The public

Curriculum Evaluation in Online Education: The Case of Teacher Candidates Preparing Online for Public Personnel Selection Examination

ERIC Educational Resources Information Center

Karacaoglu, Ömer Cem

2018-01-01

The aim of the present study is to evaluate the efficiency of an online curriculum based on the views of lecturers and students enrolled in the program. The study is mainly based on survey method. In order to collect qualitative data, interviews forms developed by the researcher were used. The reliability and validity of the interview forms were…

Innovative Equipment and Production Method for Mixed Fodder in the Conditions of Agricultural Enterprises

NASA Astrophysics Data System (ADS)

Sabiev, U. K.; Demchuk, E. V.; Myalo, V. V.; Soyunov, A. S.

2017-07-01

It is recommended to feed the cattle and poultry with grain fodder in the form of feed mixture balanced according to the content. Feeding of grain fodder in the form of stock feed is inefficient and economically unreasonable. The article is devoted to actual problem - the preparation of mixed fodder in the conditions of agricultural enterprises. Review and critical analyses of mixed fodder assemblies and aggregates are given. Structural and technical schemes of small-size mixed fodder aggregate with intensified attachments of vibrating and percussive action for preparation of bulk feed mixture in the conditions of agricultural enterprises were developed. The mixed fodder aggregate for its preparation in the places of direct consumption from own grain fodder production and purchased protein and vitamin supplements is also suggested. Mixed fodder aggregate allows to get prepared mixed fodder of high uniformity at low cost of energy and price of production that is becoming profitable for livestock breeding. Model line-up of suggested mixed fodder aggregate with different productivity both for small and big agricultural enterprises is considered.

Studies on the preparation and plasma spherodization of yttrium aluminosilicate glass microspheres for their potential application in liver brachytherapy

NASA Astrophysics Data System (ADS)

Sreekumar, K. P.; Saxena, S. K.; Kumar, Yogendra; Thiyagarajan, T. K.; Dash, Ashutosh; Ananthapadmanabhan, P. V.; Venkatesh, Meera

2010-02-01

Plasma spheroidization exploits the high temperature and high enthalpy available in the thermal plasma jet to melt irregularly shaped powder particles and quench them to get dense spherical particles. Plasma spheroidization is a versatile process and can be applied to metals, ceramics, alloys and composites to obtain fine spherical powders. Radioactive microspheres incorporated with high energetic beta emitting radioisotopes have been reported to be useful in the palliative treatment of liver cancer. These powders are to be prepared in closer range of near spherical morphology in the size range 20-35 microns. Inactive glass samples were prepared by heating the pre-calculated amount of glass forming ingredients in a recrystallized alumina crucible. The glass was formed by keeping the glass forming ingredients at 1700°C for a period of three hours to form a homogeneous melt. After cooling, the glass was recovered from the crucible by crushing and was subsequently powdered mechanically with the help of mortar and pestle. This powder was used as the feed stock for plasma spheroidization using an indigenously developed 40 kW plasma spray system. Experiments were carried out at various operating parameters. The operating parameters were optimised to get spheroidised particles. The powder was sieved to get the required size range before irradiation.

[A comparison of the properties of bacteriocins formed by Lactococcus lactis subsp. lactis strains of diverse origin].

PubMed

Stoianova, L G; Egorov, N S; Fedorova, G B; Katrukha, G S; Netrusov, A I

2007-01-01

Bacteriocins formed by four strains of Lactococcus lactis subsp. lactis have been studied and compared: 729 (a natural strain isolated from milk), 1605 (a mutant of strain 729), F-116 (a recombinant obtained by fusing of protoplasts of the two related strain 729 and 1605), and a nisin-forming strain obtained by adaptive selection at Moscow State University. Antimicrobial activity studies revealed differences between the strains in the effects on individual groups of microorganisms; the activities of the strains were also distinct from that of Nisaplin (a commercial preparation of the bacteriocin nisin). Methods for isolation and purification of bacteriocins have been developed, making it possible to obtain individual components of antibiotic complexes as chromatographically pure preparations. Bacteriocins formed by the strains of Lactococcus lactis subsp. lactis have been identified and differences in their biological and physicochemical properties, established. A novel potent broad-spectrum antibiotic substance distinct from nisin has been isolated from the recombinant strain F-116.

Formulation and Development of Metered Dose Inhalations of Salbutamol in Solution Form

PubMed Central

Khale, Anubha; Bajaj, Amrita

2011-01-01

In the present study attempts were made to prepare metered dose inhalation of salbutamol in solution form and compared it with the marketed metered dose inhalation in suspension form. Solution form of the drug was found better than marketed suspension formulation with respect to homogeneity and content uniformity. Propellant blend P-11 and P-12 in the proportion 30:70 was selected as it gave optimum vapour pressure. Surfactant oleic acid in concentration 10 mg per can was selected as it gave best results with clarity, spray pattern, vapour pressure, content per spray and rate of evaporation. Ethyl alcohol 2 ml per can was used as a cosolvent to give a clear solution, optimum vapour pressure, maximum content per spray and fair rate of evaporation. The selected formulation was subjected to the physico-chemical evaluation tests as per the standard pharmacopoeial procedures and the characteristics of the formulations were further compared with a conventional marketed formulation. In vitro study reveled the net respirable fraction was better than marketed preparation. PMID:22923867

Characterization of film-forming solutions and films incorporating free and nanoencapsulated tea polyphenol prepared by gelatins with different Bloom values

USDA-ARS?s Scientific Manuscript database

Gelatin film-forming solutions and their films incorporating tea polyphenol (TP) and chitosan nanoparticles (CSNs) were prepared from gelatins with different Bloom values (100, 150 and 225). Blank gelatin film-forming solutions and films were prepared as controls. Gelatins with higher Bloom values h...

Fluoride loaded polymeric nanoparticles for dental delivery.

PubMed

Nguyen, Sanko; Escudero, Carlos; Sediqi, Nadia; Smistad, Gro; Hiorth, Marianne

2017-06-15

The overall aim of the present paper was to develop fluoride loaded nanoparticles based on the biopolymers chitosan, pectin, and alginate, for use in dental delivery. First, the preparation of nanoparticles in the presence of sodium fluoride (NaF) as the active ingredient by ionic gelation was investigated followed by an evaluation of their drug entrapment and release properties. Chitosan formed stable, spherical, and monodisperse nanoparticles in the presence of NaF and tripolyphoshate as the crosslinker, whereas alginate and pectin were not able to form any definite nanostructures in similar conditions. The fluoride loading capacity was found to be 33-113ppm, and the entrapment efficiency 3.6-6.2% for chitosan nanoparticles prepared in 0.2-0.4% (w/w) NaF, respectively. A steady increase in the fluoride release was observed for chitosan nanoparticles prepared in 0.2% NaF both in pH5 and 7 until it reached a maximum at time point 4h and maintained at this level for at least 24h. Similar profiles were observed for formulations prepared in 0.4% NaF; however the fluoride was released at a higher level at pH5. The low concentration, but continuous delivery of fluoride from the chitosan nanoparticles, with possible expedited release in acidic environment, makes these formulations highly promising as dental delivery systems in the protection against caries development. Copyright © 2017 Elsevier B.V. All rights reserved.

Development and validation of RP HPLC method to determine nandrolone phenylpropionate in different pharmaceutical formulations.

PubMed

Mukherjee, Jayanti; Das, Ayan; Chakrabarty, Uday Sankar; Sahoo, Bijay Kumar; Dey, Goutam; Choudhury, Hira; Pal, Tapan Kumar

2011-01-01

This study describes development and subsequent validation of a reversed phase high performance liquid chromatographic (RP-HPLC) method for the estimation of nandrolone phenylpropionate, an anabolic steroid, in bulk drug, in conventional parenteral dosage formulation and in prepared nanoparticle dosage form. The chromatographic system consisted of a Luna Phenomenex, CN (250 mm x 4.6 mm, 5 microm) column, an isocratic mobile phase comprising 10 mM phosphate buffer and acetonitrile (50:50, v/v) and UV detection at 240 nm. Nandrolone phenylpropionate was eluted about 6.3 min with no interfering peaks of excipients used for the preparation of dosage forms. The method was linear over the range from 0.050 to 25 microg/mL in raw drug (r2 = 0.9994). The intra-day and inter-day precision values were in the range of 0.219-0.609% and 0.441-0.875%, respectively. Limits of detection and quantitation were 0.010 microg/mL and 0.050 microg/mL, respectively. The results were validated according to International Conference on Harmonization (ICH) guidelines in parenteral and prepared nanoparticle formulation. The validated HPLC method is simple, sensitive, precise, accurate and reproducible.

The Exception Does Not Rule: Attention Constrains Form Preparation in Word Production

PubMed Central

O’Séaghdha, Pádraig G.; Frazer, Alexandra K.

2014-01-01

Form preparation in word production, the benefit of exploiting a useful common sound (such as the first phoneme) of iteratively spoken small groups of words, is notoriously fastidious, exhibiting a seemingly categorical, all-or-none character, and a corresponding susceptibility to ‘killers’ of preparation. In particular, the presence of a single exception item in a group of otherwise phonologically consistent words has been found to eliminate the benefit of knowing a majority characteristic. This has been interpreted to mean that form preparation amounts to partial production, and thus provides a window on fundamental processes of phonological word encoding (e.g., Levelt et al., 1999). However, preparation of only fully distributed properties appears to be non-optimal, and is difficult to reconcile with the sensitivity of cognitive responses to probabilities in other domains. We show here that the all-or-none characteristic of form preparation is specific to task format. Preparation for sets that included an exception item occurred in ecologically valid production tasks, picture naming (Experiment 1), and word naming (Experiment 2). Preparation failed only in the commonly used, but indirect and resource-intensive, associative cuing task (Experiment 3). We outline an account of form preparation in which anticipation of word-initial phonological fragments uses a limited capacity, sustained attentional capability that points to rather than enacts possibilities for imminent speech. PMID:24548328

32 CFR Appendix A to Part 1290 - Preparation Guide for DD Form 1805, Violation Notice

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Preparation Guide for DD Form 1805, Violation.... DISTRICT COURTS Pt. 1290, App. A Appendix A to Part 1290—Preparation Guide for DD Form 1805, Violation... data, as appropriate, and the place of court (i.e., Magistrate Court Address), the date and time of...

Spirituality as Foundation of Agency in Turbulent Economic Times

ERIC Educational Resources Information Center

Kuchinke, K. Peter

2016-01-01

The changing meaning of work calls for care and concern for the spiritual dimension of the workplace. Toward this end, a more liberal form of workforce education and human resource development in response to workplace preparation for managers is needed.

Student Perceptions of the Value of Career Development Learning to a Work-Integrated Learning Course in Exercise Science

ERIC Educational Resources Information Center

Reddan, Gregory; Rauchle, Maja

2012-01-01

Work-integrated learning has become a significant feature of Australian universities over the past decade. Earlier research indicates that some form of career development is essential to prepare undergraduate students for a competitive employment market. The 2008 National Association of Graduate Careers Advisory Services (NAGCAS) Symposium sought…

Let the (Board) Games Begin: Creative Ways to Enhance Teaching and Learning

ERIC Educational Resources Information Center

Sardone, Nancy B.; Devlin-Scherer, Roberta

2016-01-01

Gaming, in its many forms, is becoming a more active force in classrooms. To prepare preservice candidates for this trend, one teacher education program asked candidates (n = 60) to develop games in varied curricular fields tied to curriculum standards. This article describes the development of a model game, assignment requirements, provides a…

Summative and Formative Evaluations, National Skill Standards Project. Prepared for the National Grocers Association.

ERIC Educational Resources Information Center

Hamm, Michael S.

In 1993-1996, the Grocers Research and Educational Foundation of the National Grocers Association developed entry-level skill standards for the food marketing industry. A coalition formed early in the project directed the skill standard development process and solicited input from major organizations involved in the industry. The validity of the…

Developing and Assessing College Student Teamwork Skills

ERIC Educational Resources Information Center

Hughes, Richard L.; Jones, Steven K.

2011-01-01

Some form of team-oriented work is employed in most, if not all, organizations today. It would seem, then, that an important role for higher education should involve developing critical teamwork skills among students so as to prepare them for success in life. This very point was highlighted in a 2009 poll conducted on behalf of the Association of…

78 FR 65329 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... Safety Testing of Sunlamp Products'' Form FDA 3632 ``Guide for Preparing Product Reports on Lasers and Products Containing Lasers'' Form FDA 3633''General Variance Request'' Form FDA 3634 ``Television Products Annual Report'' Form FDA 3635 ``Laser Light Show Notification'' Form FDA 3636 ``Guide for Preparing...

75 FR 26964 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... of Sunlamps and Sunlamp Products'' FDA Form 3632 ``Guide for Preparing Product Reports on Lasers and Products Containing Lasers'' FDA Form 3633 ``General Variance Request'' FDA Form 3634 ``Television Products Annual Report'' FDA Form 3635 ``Laser Light Show Notification'' FDA Form 3636 ``Guide for Preparing...

Crystalline form of a neutrophil elastase inhibitor, 6-methyl-5-(1-methyl-1H-pyrazol-5-yl)-N-{[5-(methylsulfonyl)pyridin-2-yl]methyl}-2-oxo-1-[3-(trifluoromethyl)phenyl]-1,2-dihydropyridine-3-carboxamide p-toluene sulfonate - is it AZD-9668?: WO-2010094964.

PubMed

Norman, Peter

2011-02-01

This patent application claims a novel crystalline form (Form A) of a tosylate salt of a previously disclosed neutrophil elastase inhibitor. It also claims oral compositions of the salt and a process for the preparation of the crystalline form. The novel form is indicated to show improved physical properties relative to the free base. The claimed compound is evidently one of the elastase inhibitors currently being developed by AstraZeneca.

Sample preparation composite and replicate strategy case studies for assay of solid oral drug products.

PubMed

Nickerson, Beverly; Harrington, Brent; Li, Fasheng; Guo, Michele Xuemei

2017-11-30

Drug product assay is one of several tests required for new drug products to ensure the quality of the product at release and throughout the life cycle of the product. Drug product assay testing is typically performed by preparing a composite sample of multiple dosage units to obtain an assay value representative of the batch. In some cases replicate composite samples may be prepared and the reportable assay value is the average value of all the replicates. In previously published work by Harrington et al. (2014) [5], a sample preparation composite and replicate strategy for assay was developed to provide a systematic approach which accounts for variability due to the analytical method and dosage form with a standard error of the potency assay criteria based on compendia and regulatory requirements. In this work, this sample preparation composite and replicate strategy for assay is applied to several case studies to demonstrate the utility of this approach and its application at various stages of pharmaceutical drug product development. Copyright © 2017 Elsevier B.V. All rights reserved.

Preparation and characterization of progesterone dispersions using supercritical carbon dioxide.

PubMed

Falconer, James R; Wen, Jingyuan; Zargar-Shoshtari, Sara; Chen, John J; Farid, Mohammed; Tallon, Stephen J; Alany, Raid G

2014-04-01

Supercritical fluid methods offer an alternative to conventional mixing methods, particularly for heat sensitive drugs and where an organic solvent is undesirable. To design, develop and construct a unit for the particles from a gas-saturated suspension/solution (PGSS) method and form endogenous progesterone (PGN) dispersion systems using SC-CO2. The PGN dispersions were manufactured using three selected excipients: polyethylene glycol (PEG) 400/4000 (50:50), Gelucire 44/14 and D-α-tocopheryl PEG 1000 succinate (TPGS). Semisolid dispersions of PGN prepared by PGSS method were compared to the conventional methods; comelting (CM), cosolvent (CS) and physical mixing (PM). The dispersion systems made were characterized by Raman and Fourier transform infrared (FTIR) spectroscopies, X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), PGN recovery, uniformity and in vitro dissolution, analyzed by high-performance liquid chromatography (HPLC). Raman spectra revealed no changes in the crystalline structure of PGN treated with SC-CO2 compared to that of untreated PGN. XRPD and FTIR showed the presence of peaks and bands for PGN confirming that PGN has been incorporated well with each individual excipient. All PGN dispersions prepared by the PGSS method resulted in the improvement of PGN dissolution rates compared to that prepared by the conventional methods and untreated PGN after 60 min (p value < 0.05). The novel PGN dispersions prepared by the PGSS method offer the great potential to enhance PGN dissolution rate, reduce preparation time and form stable crystalline dispersion systems over those prepared by conventional methods.

Proposed Guidance for Preparing and Reviewing Molten Salt Nonpower Reactor Licence Applications (NUREG-1537)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belles, Randy; Flanagan, George F.; Voth, Marcus

Development of non-power molten salt reactor (MSR) test facilities is under consideration to support the analyses needed for development of a full-scale MSR. These non-power MSR test facilities will require review by the US Nuclear Regulatory Commission (NRC) staff. This report proposes chapter adaptations for NUREG-1537 in the form of interim staff guidance to address preparation and review of molten salt non-power reactor license applications. The proposed adaptations are based on a previous regulatory gap analysis of select chapters from NUREG-1537 for their applicability to non-power MSRs operating with a homogeneous fuel salt mixture.

Method for preparing high purity vanadium

DOEpatents

Schmidt, Frederick; Carlson, O. Norman

1986-09-09

A method for preparing high purity vanadium having a low silicon content has been developed. Vanadium pentoxide is reduced with a stoichiometric, or slightly deficient amount of aluminum to produce a vanadium-aluminum alloy containing an excess of oxygen. Silicon is removed by electron-beam melting the alloy under oxidizing conditions to promote the formation of SiO which is volatile at elevated temperatures. Excess oxygen is removed by heating the alloy in the presence of calcium metal to form calcium oxide.

Method for preparing high purity vanadium

DOEpatents

Schmidt, F.; Carlson, O.N.

1984-05-16

A method for preparing high purity vanadium having a low silicon content has been developed. Vanadium pentoxide is reduced with a stoichiometric, or slightly deficient amount of aluminum to produce a vanadium-aluminum alloy containing an excess of oxygen. Silicon is removed by electron-beam melting the alloy under oxidizing conditions to promote the formation of SiO which is volatile at elevated temperatures. Excess oxygen is removed by heating the alloy in the presence of calcium metal to form calcium oxide.

Porous Chromatographic Materials as Substrates for Preparing Synthetic Nuclear Explosion Debris Particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harvey, Scott D.; Liezers, Martin; Antolick, Kathryn C.

2013-06-13

In this study, we investigated several porous chromatographic materials as synthetic substrates for preparing surrogate nuclear explosion debris particles. The resulting synthetic debris materials are of interest for use in developing analytical methods. Eighteen metals, including some of forensic interest, were loaded onto materials by immersing them in metal solutions (556 mg/L of each metal) to fill the pores, applying gentle heat (110°C) to drive off water, and then treating them at high temperatures (up to 800°C) in air to form less soluble metal species. High-boiling-point metals were uniformly loaded on spherical controlled-pore glass to emulate early fallout, whereas low-boiling-pointmore » metals were loaded on core-shell silica to represent coated particles formed later in the nuclear fallout-formation process. Analytical studies were applied to characterize solubility, material balance, and formation of recalcitrant species. Dissolution experiments indicated loading was 1.5 to 3 times higher than expected from the pore volume alone, a result attributed to surface coating. Analysis of load solutions before and after filling the material pores revealed that most metals were passively loaded; that is, solutions filled the pores without active metal discrimination. However, niobium and tin concentrations were lower in solutions after pore filling, and were found in elevated concentrations in the final products, indicating some metals were selectively loaded. High-temperature treatments caused reduced solubility of several metal species, and loss of some metals (rhenium and tellurium) because volatile species were formed. Sample preparation reproducibility was high (the inter-batch relative standard deviation was 7.8%, and the intra-batch relative standard deviation was 0.84%) indicating that this material is suitable for use as a working standard for analytical methods development. We anticipate future standardized radionuclide-loaded materials will find use in radioanalytical methods development and/or serve as a starting material for the synthesis of more complex forms of nuclear explosion debris (e.g., Trinitite).« less

Parenthood Education: A Curriculum Guide.

ERIC Educational Resources Information Center

Northern Illinois Univ., De Kalb. Dept. of Home Economics.

This home economics education curriculum guide provides the teacher-developer with learner competencies for a parenthood education program. The guide is designed in the form of competency statements, criteria for the competency, and enabling activities. Chapter 1, parental relationships, contains competencies concerning preparation for parenthood,…

28 CFR 104.33 - Hearing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Hearing. 104.33 Section 104.33 Judicial..., and Review Procedures § 104.33 Hearing. (a) Supplemental submissions. The claimant may prepare and... Special Master shall develop forms appropriate for Supplemental Submissions. (b) Conduct of hearings...

28 CFR 104.33 - Hearing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Hearing. 104.33 Section 104.33 Judicial..., and Review Procedures § 104.33 Hearing. (a) Supplemental submissions. The claimant may prepare and... Special Master shall develop forms appropriate for Supplemental Submissions. (b) Conduct of hearings...

Synthesis of docosapentaenoic acid-enriched diacylglycerols by enzymatic glycerolysis of Schizochytrium sp. oil.

PubMed

Wang, Xiaosan; Wang, Xiaohan; Wang, Wei; Jin, Qingzhe; Wang, Xingguo

2018-04-17

Utilization of algae oil and glycerol for preparation of value-added products is vital for sustainable development of related industries. In this study, we aimed to prepare highly pure diacylglycerols (DAG) rich in docosapentaenoic acid (DPA). First, content of DPA in form of triacylglycerols (TAG) increased from 16.4% to 28.1% after low-temperature crystallization of Schizochytrium sp. oil at -80 °C for 6 h. Subsequently, DPA-enriched DAG was prepared by the enzymatic glycerolysis of the enriched oil. Under the optimum conditions, there was 48.4% DAG produced in the crude mixture. To remove polar impurities from the crude product, a novel two-step purification was developed and the final product consisted of 75.1% DAG and 24.9% TAG with a low peroxide value. The current method for the synthesis of DAG rich DPA is effective and relatively mild and the successful preparation of value-added product will reduce production costs for algae and biodiesel industries. Copyright © 2018 Elsevier Ltd. All rights reserved.

Preparation and Structural Studies on Hybrid Core-Shell Nanoparticles Consisting of Silica Core and Conjugated Block Copolymer Shell Prepared by Surface-Initiated Polymerization

NASA Astrophysics Data System (ADS)

Chatterjee, Sourav; Karam, Tony; Rosu, Cornelia; Li, Xin; Do, Changwoo; Youm, Sang Gil; Haber, Louis; Russo, Paul; Nesterov, Evgueni

Controlled Kumada catalyst-transfer polymerization occurring by chain-growth mechanism was developed for the synthesis of conjugated polymers and block copolymers from the surface of inorganic substrates such as silica nanoparticles. Although synthesis of conjugated polymers via Kumada polymerization became an established method for solution polymerization, carrying out the same reaction in heterogeneous conditions to form monodisperse polymer chains still remains a challenge. We developed and described a simple and efficient approach to the preparation of surface-immobilized layer of catalytic Ni(II) initiator, and demonstrated using it to prepare polymers and block copolymers on silica nanoparticle. The structure of the resulting hybrid nanostructures was thoroughly studied using small-angle neutron and X-ray scattering, thermal analysis, and optical spectroscopy. The photoexcitation energy transfer processes in the conjugated polymer shell were studied via steady-state and time resolved transient absorption spectroscopy. This study uncovered important details of the energy transfer, which will be discussed in this presentation.

Development of piezoelectric composites for transducers

NASA Astrophysics Data System (ADS)

Safari, A.

1994-07-01

For the past decade and a half, many different types of piezoelectric ceramic-polymer composites have been developed intended for transducer applications. These diphasic composites are prepared from non-active polymer, such as epoxy, and piezoelectric ceramic, such as PZT, in the form of filler powders, elongated fibers, multilayer and more complex three-dimensional structures. For the last four years, most of the efforts have been given to producing large area and fine scale PZT fiber composites. In this paper, processing of piezoelectric ceramic-polymer composites with various connectivity patterns are reviewed. Development of fine scale piezoelectric composites by lost mold, injection molding and the relic method are described. Research activities of different groups for preparing large area piezocomposites for hydrophone and actuator applications are briefly reviewed. Initial development of electrostrictive ceramics and composites are also

Productivity and soil properties 45 years after timber harvest and mechanical site preparation in western Montana

Treesearch

Luke M. Cerise; Deborah S. Page-Dumroese; Paul McDaniel; Cole Mayn; Robert Heinse

2013-01-01

Site preparation following timber harvests is widely used to increase seedling establishment postharvest. Historically, dozer piling and ripping were the most common forms of site preparation in the Intermountain West. Less commonly, terracing of hill slopes was another form of site preparation on the Bitterroot National Forest in western Montana from 1961-1970 on...

Engineering-Scale Demonstration of DuraLith and Ceramicrete Waste Forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Josephson, Gary B.; Westsik, Joseph H.; Pires, Richard P.

2011-09-23

To support the selection of a waste form for the liquid secondary wastes from the Hanford Waste Immobilization and Treatment Plant, Washington River Protection Solutions (WRPS) has initiated secondary waste form testing on four candidate waste forms. Two of the candidate waste forms have not been developed to scale as the more mature waste forms. This work describes engineering-scale demonstrations conducted on Ceramicrete and DuraLith candidate waste forms. Both candidate waste forms were successfully demonstrated at an engineering scale. A preliminary conceptual design could be prepared for full-scale production of the candidate waste forms. However, both waste forms are stillmore » too immature to support a detailed design. Formulations for each candidate waste form need to be developed so that the material has a longer working time after mixing the liquid and solid constituents together. Formulations optimized based on previous lab studies did not have sufficient working time to support large-scale testing. The engineering-scale testing was successfully completed using modified formulations. Further lab development and parametric studies are needed to optimize formulations with adequate working time and assess the effects of changes in raw materials and process parameters on the final product performance. Studies on effects of mixing intensity on the initial set time of the waste forms are also needed.« less

Development of Oromucosal Dosage Forms by Combining Electrospinning and Inkjet Printing.

PubMed

Palo, Mirja; Kogermann, Karin; Laidmäe, Ivo; Meos, Andres; Preis, Maren; Heinämäki, Jyrki; Sandler, Niklas

2017-03-06

Printing technology has been shown to enable flexible fabrication of solid dosage forms for personalized drug therapy. Several methods can be applied for tailoring the properties of the printed pharmaceuticals. In this study, the use of electrospun fibrous substrates in the fabrication of inkjet-printed dosage forms was investigated. A single-drug formulation with lidocaine hydrochloride (LH) and a combination drug system containing LH and piroxicam (PRX) for oromucosal administration were prepared. The LH was deposited on the electrospun and cross-linked gelatin substrates by inkjet printing, whereas PRX was incorporated within the substrate fibers during electrospinning. The solid state analysis of the electrospun substrates showed that PRX was in an amorphous state within the fibers. Furthermore, the results indicated the entrapment and solidification of the dissolved LH within the fibrous gelatin matrix. The printed drug amount (2-3 mg) was in good correlation with the theoretical dose calculated based on the printing parameters. However, a noticeable degradation of the printed LH was detected after a few months. An immediate release (over 85% drug release after 8 min) of both drugs from the printed dosage forms was observed. In conclusion, the prepared electrospun gelatin scaffolds were shown to be suitable substrates for inkjet printing of oromucosal formulations. The combination of electrospinning and inkjet printing allowed the preparation of a dual drug system.

Manual for the Bateria de Examenes de Aptitud General (BEAG). Section II. Development.

ERIC Educational Resources Information Center

Employment of Training Administration (DOL), Washington, DC. Office of Research and Development.

The development and norming of a Spanish language edition of the United States Employment Service (USES) General Aptitude Test Battery (GATB) is described. The new edition, called the Bateria de Examenes de Aptitud General (BEAG), was designed to replace an earlier translation, the BGPA, prepared for use in Puerto Rico. Forms A and B were…

Integrating the Arts in Rural Schools.

ERIC Educational Resources Information Center

Galles, Karen

1986-01-01

Describes integrated approach to teaching the arts which can be utilized in single or multi-grade classrooms in rural settings by teachers who may not have a background in any art form. Addresses problems of time, preparation, and resources that hinder curriculum development by rural educators. (NEC)

Versatile bio-ink for covalent immobilization of chimeric avidin on sol-gel substrates.

PubMed

Heikkinen, Jarkko J; Kivimäki, Liisa; Määttä, Juha A E; Mäkelä, Inka; Hakalahti, Leena; Takkinen, Kristiina; Kulomaa, Markku S; Hytönen, Vesa P; Hormi, Osmo E O

2011-10-15

A bio-ink for covalent deposition of thermostable, high affinity biotin-binding chimeric avidin onto sol-gel substrates was developed. The bio-ink was prepared from heterobifunctional crosslinker 6-maleimidohexanoic acid N-hydroxysuccinimide which was first reacted either with 3-aminopropyltriethoxysilane or 3-aminopropyldimethylethoxysilane to form silane linkers 6-maleimide-N-(3-(triethoxysilyl)propyl)hexanamide or -(ethoxydimethylsilyl)propyl)-hexanamide. C-terminal cysteine genetically engineered to chimeric avidin was reacted with the maleimide group of silane linker in methanol/PBS solution to form a suspension, which was printed on sol-gel modified PMMA film. Different concentrations of chimeric avidin and ratios between silane linkers were tested to find the best properties for the bio-ink to enable gravure or inkjet printing. Bio-ink prepared from 3-aminopropyltriethoxysilane was found to provide the highest amount of active immobilized chimeric avidin. The developed bio-ink was shown to be valuable for automated fabrication of avidin-functionalized polymer films. Copyright © 2011 Elsevier B.V. All rights reserved.

Ice Surfaces.

PubMed

Shultz, Mary Jane

2017-05-05

Ice is a fundamental solid with important environmental, biological, geological, and extraterrestrial impact. The stable form of ice at atmospheric pressure is hexagonal ice, I h . Despite its prevalence, I h remains an enigmatic solid, in part due to challenges in preparing samples for fundamental studies. Surfaces of ice present even greater challenges. Recently developed methods for preparation of large single-crystal samples make it possible to reproducibly prepare any chosen face to address numerous fundamental questions. This review describes preparation methods along with results that firmly establish the connection between the macroscopic structure (observed in snowflakes, microcrystallites, or etch pits) and the molecular-level configuration (detected with X-ray or electron scattering techniques). Selected results of probing interactions at the ice surface, including growth from the melt, surface vibrations, and characterization of the quasi-liquid layer, are discussed.

Process for the preparation of protected dihydroxypropyl trialkylammonium salts and derivatives thereof

DOEpatents

Hollingsworth, Rawle I.; Wang, Guijun

2000-01-01

A process for the preparation of protected dihydroxypropyl trialkylammonium salts, particularly in chiral form is described. In particular, a process for the preparation of (2,2-dimethyl-1,3-dioxolan-4-ylmethyl)trialkylammonium salts, particularly in chiral form is described. Furthermore, a process is described wherein the (2,2-dimethyl-1,3-dioxolan-4ylmethyl)trialkylammonium salts is a 2,2-dimethyl-1,3-dioxolan-4-ylmethyl trimethylammonium salt, preferably in chiral form. The protected dihydroxypropyl trialkylammonium salts lead to L-carnitine (9) when in chiral form (5).

Effect of surface area and chemisorbed oxygen on the SO2 adsorption capacity of activated char

USGS Publications Warehouse

Lizzio, A.A.; DeBarr, J.A.

1996-01-01

The objective of this study was to determine whether activated char produced from Illinois coal could be used effectively to remove sulfur dioxide from coal combustion flue gas. Chars were prepared from a high-volatile Illinois bituminous coal under a wide range of pyrolysis and activation conditions. A novel char preparation technique was developed to prepare chars with SO2 adsorption capacities significantly greater than that of a commercial activated carbon. In general, there was no correlation between SO2 adsorption capacity and surface area. Temperature-programmed desorption (TPD) was used to determine the nature and extent of carbon-oxygen (C-O) complexes formed on the char surface. TPD data revealed that SO2 adsorption was inversely proportional to the amount of C-O complex. The formation of a stable C-O complex during char preparation may have served only to occupy carbon sites that were otherwise reactive towards SO2 adsorption. A fleeting C(O) complex formed during SO2 adsorption is postulated to be the reaction intermediate necessary for conversion of SO2 to H2SO4. Copyright ?? 1996 Elsevier Science Ltd.

Temperature and magnetic field responsive hyaluronic acid particles with tunable physical and chemical properties

NASA Astrophysics Data System (ADS)

Ekici, Sema; Ilgin, Pinar; Yilmaz, Selahattin; Aktas, Nahit; Sahiner, Nurettin

2011-01-01

We report the preparation and characterization of thiolated-temperature-responsive hyaluronic acid-cysteamine-N-isopropyl acrylamide (HA-CYs-NIPAm) particles and thiolated-magnetic-responsive hyaluronic acid (HA-Fe-CYs) particles. Linear hyaluronic acid (HA) crosslinked with divinyl sulfone as HA particles was prepared using a water-in-oil micro emulsion system which were then oxidized HA-O with NaIO4 to develop aldehyde groups on the particle surface. HA-O hydrogel particles were then reacted with cysteamine (CYs) which interacted with aldehydes on the HA surface to form HA particles with cysteamine (HA-CYs) functionality on the surface. HA-CYs particles were further exposed to radical polymerization with NIPAm to obtain temperature responsive HA-CYs-NIPAm hydrogel particles. To acquire magnetic field responsive HA composites, magnetic iron particles were included in HA to form HA-Fe during HA particle preparation. HA-Fe hydrogel particles were also chemically modified. The prepared HA-CYs-NIPAm demonstrated temperature dependent size variations and phase transition temperature. HA-CYs-NIPAm and HA-Fe-CYs particles can be used as drug delivery vehicles. Sulfamethoxazole (SMZ), an antibacterial drug, was used as a model drug for temperature-induced release studies from these particles.

[About flavouring substances and flavouring preparations regulation in the field of manufacturing of flavourings and foodstuffs].

PubMed

Bagriantseva, O V; Shatrov, G N

2013-01-01

In article are given substantiation for modification of contemporary list of biologically active substances with undesirable toxicological qualities (namely included in this list of menthofuran, methyleugenol (4-Allyl-1,2-dimethoxybenzene), teucrin A, capsaicin, estragol1 (-Allyl-4-methoxybenzene) and excluded from the list of quinine, santonin, berberin) and developing the list of plants--natural sources of flavourings substances. The new criteria of European Union for including into the relevant for using in/on foodstuff list of flavouring substances, which was published in the Comission Implementing Regulation (EU) No 872/2012 concerning flavourings, listed the 11 flavouring substances for which have been established indexes of foodstuffs in manufacturing, which there are could using and criteria of their safety (caffeine, theobromine, neohesperidin dihydrocalcone, rebaudioside A, d-camphor, three quinine salts (FL 14.011, FL 14.152 and FL 14.155), glycyrrhizic acid and its ammoniated form, ammonium chloride, discussed the possibility of using R- and S-isomers of flavouring substances and L- and D-forms of aminoacids for preparing of flavours, are discussed. Improving of the system of safety using of flavourings in Russian Federation, harmonized with demands of European Union and FAQ/WHO, are, at first, connected with the necessity of reevaluation of the list flavouring substances, which could be use in/on foodstuff, developing of list of the plants--natural sources of flavourings substances and preparations and regulations of using flavourings preparations which can include biologically active substances.

Synthesis of highly substituted 2,3-dihydropyrimido[4,5-d]pyrimidin-4(1H)-ones from 4,6-dichloro-5-formylpyrimidine, amines and aldehydes.

PubMed

Xiang, Jinbao; Geng, Chao; Yi, Lang; Dang, Qun; Bai, Xu

2011-11-01

A practical strategy was developed for the preparation of highly substituted 2,3-dihydropyrimido[4,5-d]pyrimidin-4(1H)-ones from 4,6-dichloro-5-formylpyrimidine, primary amines, and aldehydes. The key step for this synthesis entails a cyclization reaction involving an intramolecular amide addition to an iminium intermediate formed in situ from 4-amino-pyrimidine-5-carboxamide 2 and aldehydes to form the pyrimido[4,5-d]pyrimidine core with a strategically placed 5-Cl group for further derivatization. The utility of this methodology was demonstrated through the preparation of a 27-membered library of representative 2,3-dihydropyrimido[4,5-d]pyrimidin-4(1H)-ones in moderate to good yields.

Platelet-rich preparations to improve healing. Part I: workable options for every size practice.

PubMed

Davis, Vicki L; Abukabda, Alaeddin B; Radio, Nicholas M; Witt-Enderby, Paula A; Clafshenkel, William P; Cairone, J Vito; Rutkowski, James L

2014-08-01

Numerous studies have demonstrated that platelet-rich preparations applied to surgical sites, injuries, or wounds are a safe and effective way to promote soft tissue healing and bone growth. Various protocols have been developed for preparing platelet-rich preparations, with subtle but important differences between them. Unfortunately, only a minority of clinicians use platelet-rich preparations, such as platelet-rich plasma and platelet-rich fibrin, in their practice, possibly due to confusion about the different methods and their advantages and disadvantages. Therefore, the different types of preparations are described to help guide the selection of the best method for any size practice. Classic methods generally require large volumes of blood and can be expensive, complicated, and time-intensive. Simpler protocols have been developed recently, which require relatively inexpensive equipment and small blood volumes and, thus, may be more applicable for small clinical practices. Platelet-rich preparations accelerate healing at earlier time points to reduce discomfort and the potential for adverse outcomes, including infection, poor wound closure, and delays in forming strong bone for subsequent procedures (such as implants). However, platelet-rich preparations may also improve long-term outcomes in patients expected to have impaired healing, such as with lifestyle choices (eg, smoking), medications (eg, steroids), diseases (eg, diabetes, osteoporosis, atherosclerosis), and aging, by supplementing the deficient wound environment to restore proper healing. Therefore, both large and small clinical practices would benefit from utilizing platelet-rich preparations to enhance healing in their patients.

3D Printed "Starmix" Drug Loaded Dosage Forms for Paediatric Applications.

PubMed

Scoutaris, Nicolaos; Ross, Steven A; Douroumis, Dennis

2018-01-16

Three- dimensional (3D) printing has received significant attention as a manufacturing process for pharmaceutical dosage forms. In this study, we used Fusion Deposition Modelling (FDM) in order to print "candy - like" formulations by imitating Starmix® sweets to prepare paediatric medicines with enhanced palatability. Hot melt extrusion processing (HME) was coupled with FDM to prepare extruded filaments of indomethacin (IND), hypromellose acetate succinate (HPMCAS) and polyethylene glycol (PEG) formulations and subsequently feed them in the 3D printer. The shapes of the Starmix® objects were printed in the form of a heart, ring, bottle, ring, bear and lion. Differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), Fourier Transform Infra-red Spectroscopy (FT-IR) and confocal Raman analysis were used to assess the drug - excipient interactions and the content uniformity. Physicochemical analysis showed the presence of molecularly dispersed IND in the printed tablets. In vivo taste masking evaluation demonstrated excellent masking of the drug bitterness. The printed forms were evaluated for drug dissolution and showed immediate IND release independently of the printed shape, within 60 min. 3D printing was used successfully to process drug loaded filaments for the development of paediatric printed tablets in the form of Starmix® designs.

48 CFR 1846.672 - Preparing DD Forms 250 and 250c.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Preparing DD Forms 250 and 250c. 1846.672 Section 1846.672 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE ADMINISTRATION CONTRACT MANAGEMENT QUALITY ASSURANCE Material Inspection and Receiving Reports 1846.672 Preparing...

Formulation Development of Spherical Crystal Agglomerates of Itraconazole for Preparation of Directly Compressible Tablets with Enhanced Bioavailability.

PubMed

Fadke, Janki; Desai, Jagruti; Thakkar, Hetal

2015-12-01

The objective of the present work was to formulate tablet dosage form of itraconazole with enhanced bioavailability. Spherical crystal agglomerates (SCA) of itraconazole prepared by quasi emulsification solvent diffusion method using Soluplus and polyethylene glycol 4000 (PEG 4000) showed increased solubility (540 μg/ml) in 0.1 N hydrochloric acid as compared to pure drug (12 μg/ml). A Fourier transform infrared (FTIR) study indicated compatibility of drug with the excipients. The developed SCA were spherical with smooth surface having an average size of 412 μm. The significantly improved micromeritic properties compared to the plain drug suggested its suitability for direct compression. The antifungal activity of itraconazole was retained in the SCA form as evidenced from the results of the disc diffusion method. The optimized SCA formulation could be easily compressed into tablet with desirable characteristics of hardness (5 kg/cm(2)) and disintegration time (6.3 min). The in vitro dissolution studies showed significant difference in the dissolution profiles of pure drug (21%) and SCA formulation (85%) which was even greater than that of marketed preparation (75%). In vivo pharmacokinetic showed significant enhancement in C max and AUC0-t with relative bioavailability of 225%. The SCA formulation seems to be promising for enhancement of oral bioavailability of itraconazole.

Development of a robust pH-sensitive polyelectrolyte ionomer complex for anticancer nanocarriers

PubMed Central

Lim, Chaemin; Youn, Yu Seok; Lee, Kyung Soo; Hoang, Ngoc Ha; Sim, Taehoon; Lee, Eun Seong; Oh, Kyung Taek

2016-01-01

A polyelectrolyte ionomer complex (PIC) composed of cationic and anionic polymers was developed for nanomedical applications. Here, a poly(ethylene glycol)–poly(lactic acid)–poly(ethylene imine) triblock copolymer (PEG–PLA–PEI) and a poly(aspartic acid) (P[Asp]) homopolymer were synthesized. These polyelectrolytes formed stable aggregates through electrostatic interactions between the cationic PEI and the anionic P(Asp) blocks. In particular, the addition of a hydrophobic PLA and a hydrophilic PEG to triblock copolyelectrolytes provided colloidal aggregation stability by forming a tight hydrophobic core and steric hindrance on the surface of PIC, respectively. The PIC showed different particle sizes and zeta potentials depending on the ratio of cationic PEI and anionic P(Asp) blocks (C/A ratio). The doxorubicin (dox)-loaded PIC, prepared with a C/A ratio of 8, demonstrated pH-dependent behavior by the deprotonation/protonation of polyelectrolyte blocks. The drug release and the cytotoxicity of the dox-loaded PIC (C/A ratio: 8) increased under acidic conditions compared with physiological pH, due to the destabilization of the formation of the electrostatic core. In vivo animal imaging revealed that the prepared PIC accumulated at the targeted tumor site for 24 hours. Therefore, the prepared pH-sensitive PIC could have considerable potential as a nanomedicinal platform for anticancer therapy. PMID:26955270

Development and in-vivo assessment of the bioavailability of oridonin solid dispersions by the gas anti-solvent technique.

PubMed

Li, Songming; Liu, Ying; Liu, Tao; Zhao, Ling; Zhao, Jihui; Feng, Nianping

2011-06-15

We developed solid dispersions, using the gas anti-solvent technique (GAS), to improve the oral bioavailability of the poorly water-soluble active component oridonin. The solubility of oridonin in supercritical carbon dioxide was measured under various pressures and temperatures. To prepare oridonin solid dispersions using the GAS technique, ethanol was used as the solvent, CO(2) was used as the anti-solvent and the hydrophilic polymer polyvinylpyrrolidone K17 (PVP K17) was used as the drug carrier matrix. Characterization of the obtained preparations was undertaken using scanning electron microscopy (SEM), X-ray diffraction (XRD) analyses and a drug release study. Oridonin solid dispersions were formed and oridonin was present in an amorphous form in these dispersions. Oridonin solid dispersions significantly increased the drug dissolution rate compared with that of oridonin powder, primarily through drug amorphization. Compared with the physical mixture of oridonin and PVP K17, oridonin solid dispersions gave higher values of AUC and C(max), and the absorption of oridonin from solid dispersions resulted in 26.4-fold improvement in bioavailability. The present study illustrated the feasibility of applying the GAS technique to prepare oridonin solid dispersions, and of using them for the delivery of oridonin via the oral route. Copyright © 2011 Elsevier B.V. All rights reserved.

A validated silver-nanoparticle-enhanced chemiluminescence method for the determination of citalopram in pharmaceutical preparations and human plasma.

PubMed

Khan, Muhammad Naeem; Jan, Muhammad Rasul; Shah, Jasmin; Lee, Sang Hak

2014-05-01

A simple and sensitive chemiluminescence (CL) method was developed for the determination of citalopram in pharmaceutical preparations and human plasma. The method is based on the enhancement of the weak CL signal of the luminol-H2 O2 system. It was found that the CL signal arising from the reaction between alkaline luminol and H2 O2 was greatly increased by the addition of silver nanoparticles in the presence of citalopram. Prepared silver nanoparticles (AgNPs) were characterized by UV-visible spectroscopy and transmission electron microscopy (TEM). Various experimental parameters affecting CL intensity were studied and optimized for the determination of citalopram. Under optimized experimental conditions, CL intensity was found to be proportional to the concentration of citalopram in the range 40-2500 ng/mL, with a correlation coefficient of 0.9997. The limit of detection (LOD) and limit of quantification (LOQ) of the devised method were 3.78 and 12.62 ng/mL, respectively. Furthermore, the developed method was found to have excellent reproducibility with a relative standard deviation (RSD) of 3.65% (n = 7). Potential interference by common excipients was also studied. The method was validated statistically using recovery studies and was successfully applied to the determination of citalopram in the pure form, in pharmaceutical preparations and in spiked human plasma samples. Percentage recoveries were found to range from 97.71 to 101.99% for the pure form, from 97.84 to 102.78% for pharmaceutical preparations and from 95.65 to 100.35% for spiked human plasma. Copyright © 2013 John Wiley & Sons, Ltd.

The influence of tooth color on preparation design for laminate veneers from a minimally invasive perspective: case report.

PubMed

Coachman, Christian; Gurel, Galip; Calamita, Marcelo; Morimoto, Susana; Paolucci, Braulio; Sesma, Newton

2014-01-01

Various types of dental preparations for laminate veneers have been proposed,depending on factors such as the properties of the ceramic material, remaining dental structure color, need for altering the dental contour, laboratory fabrication technique, and occlusal relationships. Clinical observations of successes and failures associated with the development of techniques and materials have allowed some safe parameters to be delineated for effectively performing dental preparations for ceramic veneers or even placing veneers without any preparation. This article describes the use of an additive diagnostic wax-up that is transferred to the mouth by means of an intraoral mock-up (aesthetic pre-evaluative temporary) with associated mathematic parameters to guide dental preparations. This technique, called Do the Math and presented here in the form of a clinical case report, aims to avoid excessive or incorrect tooth preparation by indicating the exact amount and location of the tooth reduction necessary to attain the desired color and shape.

Synthesis of highly uniform Cu2O spheres by a two-step approach and their assembly to form photonic crystals with a brilliant color.

PubMed

Su, Xin; Chang, Jie; Wu, Suli; Tang, Bingtao; Zhang, Shufen

2016-03-21

Monodisperse semiconductor colloidal spheres with a high refractive index hold great potential for building photonic crystals with a strong band gap, but the difficulty in separating the nucleation and growth processes makes it challenging to prepare highly uniform semiconductor colloidal spheres. Herein, real monodisperse Cu2O spheres were prepared via a hot-injection & heating-up two-step method using diethylene glycol as a milder reducing agent. The diameter of the as prepared Cu2O spheres can be tuned from 90 nm to 190 nm precisely. The SEM images reveal that the obtained Cu2O spheres have a narrow size distribution, which permits their self-assembly to form photonic crystals. The effects of precursor concentration and heating rates on the size and morphology of the Cu2O spheres were investigated in detail. The results indicate that the key points of the method include the burst nucleation to form seeds at a high temperature followed by rapid cooling to prevent agglomeration, and appropriate precursor concentration as well as a moderate growth rate during the further growth process. Importantly, photonic crystal films exhibiting a brilliant structural color were fabricated with the obtained monodisperse Cu2O spheres as building blocks, proving the possibility of making photonic crystals with a strong band gap. The developed method was also successfully applied to prepare monodisperse CdS spheres with diameters in the range from 110 nm to 210 nm.

Preformulation considerations for controlled release dosage forms. Part I. Selecting candidates.

PubMed

Chrzanowski, Frank

2008-01-01

The physical-chemical properties of interest for controlled release (CR) dosage form development presented are based on the author's experience. Part I addresses selection of the final form based on a logical progression of physical-chemical properties evaluation of candidate forms and elimination of forms with undesirable properties from further evaluation in order to simplify final form selection. Several candidate forms which could include salt, free base or acid, polymorphic and amorphic forms of a new chemical entity (NCE) or existing drug substance (DS) are prepared and evaluated for critical properties in a scheme relevant to manufacturing processes, predictive of problems, requiring small amounts of test materials and simple analytical tools. A stability indicating assay is not needed to initiate the evaluation. This process is applicable to CR and immediate release (IR) dosage form development. The critical properties evaluated are melting, crystallinity, solubilities in water, 0.1 N HCl, and SIF, hygrodymamics, i.e., moisture sorption and loss at extremes of RH, and LOD at typical wet granulation drying conditions, and processability, i.e., corrosivity, and filming and/or sticking upon compression.

Patent Administration by Office Computer - A Case at Mazda Motor Corporation

NASA Astrophysics Data System (ADS)

Kimura, Ikuo; Nakamura, Shinji

The needs of patent administration have been diversified reflecting R&D activities under the severe competition of technical development, and business has been increased in quantity year after year as seen in patent application. Under these circumstances it is necessary to develop business mechanization which assists manual operation as much as possible to enforce the patent administration. Introducing office computer (CPU 512 KB, external memory 128 MB) for exclusive use in this purpose, Patent Department of Mazda Motor Corporation has been constructing database of patent administration centered around patent application by their own company, and utilizes it for automatic preparation of business forms, preparation of various statistical materials, and real-time reference to the application procedures.

Development and Evaluation of a Wide-Bed Former for Vegetable Cultivation in Controlled Tractor Traffic

NASA Astrophysics Data System (ADS)

Dixit, Anoop; Khurana, Rohinish; Verma, Aseem; Singh, Arshdeep; Manes, G. S.

2018-05-01

India is the second largest producer of vegetables in the world. For vegetable cultivation, a good seed bed preparation is an important task which involves 6-10 different operations. To tackle the issue of multiple operations, a prototype of tractor operated wide bed former was developed and evaluated. The machine comprises of a rotary tiller and a bed forming setup. It forms bed of 1000 mm top width which is suitable as per the track width of an average sized tractor in India. The height of the beds formed is 130 mm whereas the top and bottom width of channel formed on both sides of the bed is 330 and 40 mm respectively at soil moisture content of 12.5-16% (db). The forward speed of 2.75 km/h was observed to be suitable for proper bed formation. The average fuel consumption of the machine was 5.9 l/h. The average bulk density of soil before and after the bed formation was 1.46 and 1.63 g/cc respectively. Field capacity of the machine was found to be 0.31 ha/h. The machine resulted in 93.8% labour saving and 80.4% saving in cost of bed preparation as compared to conventional farmer practice. Overall performance of wide-bed former was found to be satisfactory.

Antiradiation Antitoxin IgG : Immunological neutralization of Radiation Toxins at Acute Radiation Syndromes.

NASA Astrophysics Data System (ADS)

Popov, Dmitri; Maliev, Slava

Introduction: High doses of radiation induce apoptotic necrosis of radio-sensitive cells. Mild doses of radiation induce apoptosis or controlled programmed death of radio-sensitive cells with-out development of inflammation and formation of Radiation Toxins. Cell apoptotic necrosis initiates Radiation Toxins (RT)formation. Radiation Toxins play an important role as a trig-ger mechanism for inflammation development and cell lysis. If an immunotherapy approach to treatment of the acute radiation syndromes (ARS) were to be developed, a consideration could be given to neutralization of radiation toxins (Specific Radiation Determinants-SRD) by specific antiradiation antibodies. Therapeutic neutralization effects of the blocking anti-radiation antibodies on the circulated RT had been studied. Radiation Toxins were isolated from the central lymph of irradiated animals with Cerebrovascular(Cv ARS),Cardiovascular (Cr ARS),Gastrointestinal(Gi ARS) and Haemopoietic (Hp ARS) forms of ARS. To accomplish this objective, irradiated animals were injected with a preparation of anti-radiation immunoglobulin G (IgG) obtained from hyperimmune donors. Radiation-induced toxins that we call Specific Radiation Determinants (SRD) possess toxic (neurotoxic, haemotoxic) characteristics as well as specific antigenic properties. Depending on direct physiochemical radiation damage, they can induce development of many of the pathological processes associated with ARS. We have tested several specific hyperimmune IgG preparations against these radiation toxins and ob-served that their toxic properties were neutralized by the specific antiradiation IgGs. Material and Methods: A scheme of experiments was following: 1.Isolation of radiation toxins (RT) from the central lymph of irradiated animals with different form of ARS. 2.Transformation of a toxic form of the RT to a toxoid form of the RT. 3.Immunization of radiation naive animals. Four groups of rabbits were inoculated with a toxoid form of SRD radiation toxins to induce hyperimmune serum: Group A -Toxoid form of CV ARS toxins ( SRD-1); Group B-Toxoid form of CR ARS (SRD-2)toxins ; Group C -Toxoid form of GI ARS (SRD-3); Group D -Toxoid form of HP ARS (SRD-4). After the hyperimmune serum was pooled from several animals, purified, and concentrated, the IgG fraction was separated. Enzyme-linked immunosorbent assays of the hyper-immune serum had revealed high titers of IgG with specific binding to radi-ation toxins. The antiradiation IgG preparation was injected into laboratory animals one hour before and three hours after irradiation, and was evaluated for its ability to protect inoculated animals against the development of acute radiation syndromes. Results: Animals that were inoculated with specific antiradiation antibodies before and after receiving lethal irradiation at LD 100/30 exhibited 60-75% survival rate within 30 days. Also, these animals inoculated with the Antiradiation Antitoxin had exhibited markedly reduced clinical symptoms of the ARS, even those ones that did not survive irradiation. Discussion: The results of our experiments have demonstrated that the rabbit hyperimmune IgG preparations directed against SRD toxins provide a significant protection against high doses of radiation. In comparison, the mortality rate of irradiated control animals was 100% in the same time period. The mortality rates of animals treated by the hyperimmune IgG antidote have varied in the different groups of ani-mals and different forms of the ARS. However, significant radioprotection was observed in each group treated with the IgGs. The specific antiradiation antidote IGg isolated from hyperim-mune serum of immunized horses is under study. The specific antiradiation antidote contains antibodies to neurotoxins -SAAN IgG includes 50% IgG to Cv ARS, 25% IgG to Cr ARS and 25 % IgG to Gi ARS. The other type of the Specific antiradiation antidote containes antibodies to hematotoxins -SAAH IgG -100%. A combined variant is under consideration.

Properties of lotus seed starch-glycerin monostearin complexes formed by high pressure homogenization.

PubMed

Chen, Bingyan; Zeng, Shaoxiao; Zeng, Hongliang; Guo, Zebin; Zhang, Yi; Zheng, Baodong

2017-07-01

Starch-lipid complexes were prepared using lotus seed starch (LS) and glycerin monostearate (GMS) via a high pressure homogenization (HPH) process, and the effect of HPH on the physicochemical properties of LS-GMS complexes was investigated. The results of Fourier transform infrared spectroscopy and complex index analysis showed that LS-GMS complexes were formed at 40MPa by HPH and the complex index increased with the increase of homogenization pressure. Scanning electron microscopy displayed LS-GMS complexes present more nest-shape structure with increasing homogenization pressure. X-ray diffraction and differential scanning calorimetry results revealed that V-type crystalline polymorph was formed between LS and GMS, with higher homogenization pressure producing an increasingly stable complex. LS-GMS complex inhibited starch granules swelling, solubility and pasting development, which further reduced peak and breakdown viscosity. During storage, LS-GMS complexes prepared by 70-100MPa had higher Avrami exponent values and lower recrystallization rates compared with native starch, which suggested a lower retrogradation trendency. Copyright © 2017 Elsevier Ltd. All rights reserved.

Validated spectrofluorimetric method for determination of two phosphodiesterase inhibitors tadalafil and vardenafil in pharmaceutical preparations and spiked human plasma.

PubMed

Abu El-Enin, Mohammed Abu Bakr; Al-Ghaffar Hammouda, Mohammed El-Sayed Abd; El-Sherbiny, Dina Tawfik; El-Wasseef, Dalia Rashad; El-Ashry, Saadia Mahmoud

2016-02-01

A valid, sensitive and rapid spectrofluorimetric method has been developed and validated for determination of both tadalafil (TAD) and vardenafil (VAR) either in their pure form, in their tablet dosage forms or spiked in human plasma. This method is based on measurement of the native fluorescence of both drugs in acetonitrile at λem 330 and 470 nm after excitation at 280 and 275 nm for tadalafil and vardenafil, respectively. Linear relationships were obtained over the concentration range 4-40 and 10-250 ng/mL with a minimum detection of 1 and 3 ng/mL for tadalafil and vardenafil, respectively. Various experimental parameters affecting the fluorescence intensity were carefully studied and optimized. The developed method was applied successfully for the determination of tadalafil and vardenafil in bulk drugs and tablet dosage forms. Moreover, the high sensitivity of the proposed method permitted their determination in spiked human plasma. The developed method was validated in terms of specificity, linearity, lower limit of quantification (LOQ), lower limit of detection (LOD), precision and accuracy. The mean recoveries of the analytes in pharmaceutical preparations were in agreement with those obtained from the comparison methods, as revealed by statistical analysis of the obtained results using Student's t-test and the variance ratio F-test. Copyright © 2015 John Wiley & Sons, Ltd.

Polymer adhesion predictions for oral dosage forms to enhance drug administration safety. Part 3: Review of in vitro and in vivo methods used to predict esophageal adhesion and transit time.

PubMed

Drumond, Nélio; Stegemann, Sven

2018-05-01

The oral cavity is frequently used to administer pharmaceutical drug products. This route of administration is seen as the most accessible for the majority of patients and supports an independent therapy management. For current oral dosage forms under development, the prediction of their unintended mucoadhesive properties and esophageal transit profiles would contribute for future administration safety, as concerns regarding unintended adhesion of solid oral dosage forms (SODF) during oro-esophageal transit still remain. Different in vitro methods that access mucoadhesion of polymers and pharmaceutical preparations have been proposed over the years. The same methods might be used to test non-adhesive systems and contribute for developing safe-to-swallow technologies. Previous works have already investigated the suitability of non-animal derived in vitro methods to assess such properties. The aim of this work was to review the in vitro methodology available in the scientific literature that used animal esophageal tissue to evaluate mucoadhesion and esophageal transit of pharmaceutical preparations. Furthermore, in vivo methodology is also discussed. Since none of the in vitro methods developed are able to mimic the complex swallowing process and oro-esophageal transit, in vivo studies in humans remain as the gold standard. Copyright © 2018 Elsevier B.V. All rights reserved.

The Relative Merits of Transparency: Investigating Situations that Support the Use of Robotics in Developing Student Learning Adaptability across Virtual and Physical Computing Platforms

ERIC Educational Resources Information Center

Okita, Sandra Y.

2014-01-01

This study examined whether developing earlier forms of knowledge in specific learning environments prepares students better for future learning when they are placed in an unfamiliar learning environment. Forty-one students in the fifth and sixth grades learned to program robot movements using abstract concepts of speed, distance and direction.…

The Exception Does Not Rule: Attention Constrains Form Preparation in Word Production

ERIC Educational Resources Information Center

O'Séaghdha, Pádraig G.; Frazer, Alexandra K.

2014-01-01

Form preparation in word production, the benefit of exploiting a useful common sound (such as the first phoneme) of iteratively spoken small groups of words, is notoriously fastidious, exhibiting a seemingly categorical, all-or-none character and a corresponding susceptibility to "killers" of preparation. In particular, the presence of a…

Development and Test Evaluations for Ni-DOBDC Metal Organic Framework (MOF) Engineered Forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell Greenhalgh

2013-07-01

A joint effort to prepare engineered forms of a Ni-DOBDC metal organic framework (MOF) was completed with contributions from PNNL, SNL and the INL. Two independent methods were used at INL and SNL to prepare engineered form (EF) sorbents from Ni-DOBDC MOF powder developed and prepared at PNNL. Xe and Kr capacity test evaluations were performed at ambient temperature with the cryostat experimental setup at INL. The initial INL EF MOF test results indicated a Xe capacity of 1.6 mmol/kg sorbent and no Kr capacity. A large loss of surface area also occurred during minimal testing rendering the INL EFmore » MOF unusable. Four capacity tests were completed using the SNL EF MOF at ambient temperature and resulted in Xe capacities of 1.4, 4.2, 5.0 and 3.8 mmol/kg sorbent with no Kr capacity observed in any ambient temperature tests. Two additional capacity tests were performed at 240 K to further evaluate SNL EF MOF performance. Xe capacities of 50.7 and 49.3 mmol/kg of sorbent and Kr capacities of 0.77 and 0.69 mmol/kg of sorbent were obtained, respectively. Following the adsorption evaluations, the SNL EF MOF material had lost about 40 % of the initial mass and 40 % of the initial surface area. In general, the Xe capacity results at ambient temperature for the INL and SNL EF Ni-DOBDC MOF’s were lower than 9.8 mmol Xe/kg sorbent test results reported by INL in FY-12 using PNNL’s inital EF supplied material.« less

26 CFR 1.6107-1 - Tax return preparer must furnish copy of return or claim for refund to taxpayer and must retain a...

Code of Federal Regulations, 2010 CFR

2010-04-01

... tax return preparer. The electronic portion of the return or claim for refund may be contained on a replica of an official form or on an unofficial form. On an unofficial form, however, data entries must reference the line numbers or descriptions on an official form. (3) For electronically filed Forms 1040EZ...

Amino acids as co-amorphous stabilizers for poorly water soluble drugs--Part 1: preparation, stability and dissolution enhancement.

PubMed

Löbmann, Korbinian; Grohganz, Holger; Laitinen, Riikka; Strachan, Clare; Rades, Thomas

2013-11-01

Poor aqueous solubility of an active pharmaceutical ingredient (API) is one of the most pressing problems in pharmaceutical research and development because up to 90% of new API candidates under development are poorly water soluble. These drugs usually have a low and variable oral bioavailability, and therefore an unsatisfactory therapeutic effect. One of the most promising approaches to increase dissolution rate and solubility of these drugs is the conversion of a crystalline form of the drug into its respective amorphous form, usually by incorporation into hydrophilic polymers, forming glass solutions. However, this strategy only led to a small number of marketed products usually because of inadequate physical stability of the drug (crystallization). In this study, we investigated a fundamentally different approach to stabilize the amorphous form of drugs, namely the use of amino acids as small molecular weight excipients that form specific molecular interactions with the drug resulting in co-amorphous forms. The two poorly water soluble drugs carbamazepine and indomethacin were combined with amino acids from the binding sites of the biological receptors of these drugs. Mixtures of drug and the amino acids arginine, phenylalanine, tryptophan and tyrosine were prepared by vibrational ball milling. Solid-state characterization with X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) revealed that the various blends could be prepared as homogeneous, single phase co-amorphous formulations indicated by the appearance of an amorphous halo in the XRPD diffractograms and a single glass transition temperature (Tg) in the DSC measurements. In addition, the Tgs of the co-amorphous mixtures were significantly increased over those of the individual drugs. The drugs remained chemically stable during the milling process and the co-amorphous formulations were generally physically stable over at least 6 months at 40 °C under dry conditions. The dissolution rate of all co-amorphous drug-amino acid mixtures was significantly increased over that of the respective crystalline and amorphous pure drugs. Amino acids thus appear as promising excipients to solve challenges connected with the stability and dissolution of amorphous drugs. Copyright © 2013 Elsevier B.V. All rights reserved.

Computer-Assisted Learning in Language Arts

ERIC Educational Resources Information Center

Serwer, Blanche L.; Stolurow, Lawrence M.

1970-01-01

A description of computer program segments in the feasibility and development phase of Operationally Relevant Activities for Children's Language Experience (Project ORACLE); original form of this paper was prepared by Serwer for presentation to annual meeting of New England Research Association (1st, Boston College, June 5-6, 1969). (Authors/RD)

Educational Specifications: Linking Design of School Facilities to Educational Program.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento. Div. of School Facilities Planning.

The California Department of Education, directed to formalize regulations governing standards for new school design and construction, has prepared a guide to help school districts develop specifications based on the architectural principle that form follows function. This guide discusses the meaning of educational specifications and their…

Implementation of an Undergraduate Nutritional Support Clerkship.

ERIC Educational Resources Information Center

Stennett, Douglass J.; And Others

1983-01-01

A 10-week, full-time elective nutritional support clerkship designed for fifth-year pharmacy students is described. The course refines the student's communication skills and develops the student's ability to properly prepare and adjust a nutritional therapy plan. A weekly student activity plan and student evaluation form are appended. (MSE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Films of cadmium sulfide and cadmium telluride have been produced by screen printing and sintering. Cadmium sulfide films ten microns thick had a resistivity in the 10 ohm-cm range. A technique was developed for forming a cadmium telluride layer on top of a cadmium sulfide layer. Process control and device preparation are areas requiring further study.

The State of Teacher Induction in Urban America

ERIC Educational Resources Information Center

Bleeker, Martha; Dolfin, Sarah; Johnson, Amy; Glazerman, Steve; Isenberg, Eric; Grider, Mary

2012-01-01

Teacher induction programs have been used by districts and schools to help respond to high turnover and inadequate preparation among beginning teachers. These programs are offered to novice teachers entering their own classrooms and are designed to provide professional development (PD) and support. Although most districts use some form of teacher…

Environmental Communication Pedagogy for Sustainability: Developing Core Capacities to Engage with Complex Problems

ERIC Educational Resources Information Center

McGreavy, Bridie; Druschke, Caroline Gottschalk; Sprain, Leah; Thompson, Jessica L.; Lindenfeld, Laura A.

2016-01-01

Pedagogy informed by environmental communication can enhance collaboration within and outside the classroom. Through our collaborative, sustainability-focused work within the United States and internationally, we identified core capacities that prepare people to work together to form inclusive organizations and identify and respond to pressing…

Measuring the Quality of Schools = Mesurer la Qualite des Establissements Scolaires.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

As part of the Organisation for Economic Cooperation and Development project on international educational indicators, four networks were formed to represent different domains. This collection contains background papers that were prepared to deal with some of the fundamental questions about process indicators examined by Network "C," the…

Issues in knowledge representation to support maintainability: A case study in scientific data preparation

NASA Technical Reports Server (NTRS)

Chien, Steve; Kandt, R. Kirk; Roden, Joseph; Burleigh, Scott; King, Todd; Joy, Steve

1992-01-01

Scientific data preparation is the process of extracting usable scientific data from raw instrument data. This task involves noise detection (and subsequent noise classification and flagging or removal), extracting data from compressed forms, and construction of derivative or aggregate data (e.g. spectral densities or running averages). A software system called PIPE provides intelligent assistance to users developing scientific data preparation plans using a programming language called Master Plumber. PIPE provides this assistance capability by using a process description to create a dependency model of the scientific data preparation plan. This dependency model can then be used to verify syntactic and semantic constraints on processing steps to perform limited plan validation. PIPE also provides capabilities for using this model to assist in debugging faulty data preparation plans. In this case, the process model is used to focus the developer's attention upon those processing steps and data elements that were used in computing the faulty output values. Finally, the dependency model of a plan can be used to perform plan optimization and runtime estimation. These capabilities allow scientists to spend less time developing data preparation procedures and more time on scientific analysis tasks. Because the scientific data processing modules (called fittings) evolve to match scientists' needs, issues regarding maintainability are of prime importance in PIPE. This paper describes the PIPE system and describes how issues in maintainability affected the knowledge representation used in PIPE to capture knowledge about the behavior of fittings.

Development of student's skills of 3D modeling of assembly units

NASA Astrophysics Data System (ADS)

Chepur, P. V.; Boshhenko, T. V.

2018-03-01

The paper presents data on the influence of additives of the pre-treated aluminium oxide powder on the structure of cast lead-tin-based bronzes. The article demonstrates that modern, advanced from the point of view of automation, methods in designing products are the basis for the successful implementation of any production task. The advantages of product presentation in the form of an assembly consisting of 3D models of its details are described. The extreme importance of high-quality preparation of students of engineering specialties for work in computer-aided design programs such as AutoCAD, Compass 3D, Inventer|, Solid Edge, Solid Works, Revit, ANSYS is considered. It is established that one of the most effective forms of increasing the level of computer graphic preparation of students are academic competitions and contests on modeling and prototyping products. The stages of creation of assembly unit models in the AutoCad and Compass 3D software suits generally accepted both in design in a business environment and during training of specialists are considered. The developed 3D models of assembly units are presented in the course of preparation for academic competitions (called Academic Olympics in Russia) of students of the 2nd-5th years of study and the first year students of the master's program in engineering. The conclusions and recommendations on the development of the direction of three-dimensional design in the environment of higher education are given.

Actinides in metallic waste from electrometallurgical treatment of spent nuclear fuel

NASA Astrophysics Data System (ADS)

Janney, D. E.; Keiser, D. D.

2003-09-01

Argonne National Laboratory has developed a pyroprocessing-based technique for conditioning spent sodium-bonded nuclear-reactor fuel in preparation for long-term disposal. The technique produces a metallic waste form whose nominal composition is stainless steel with 15 wt.% Zr (SS-15Zr), up to ˜ 11 wt.% actinide elements (primarily uranium), and a few percent metallic fission products. Actual and simulated waste forms show similar eutectic microstructures with approximately equal proportions of iron solid solution phases and Fe-Zr intermetallics. This article reports on an analysis of simulated waste forms containing uranium, neptunium, and plutonium.

Induction and treatment of anergy in murine leprosy

PubMed Central

Juarez-Ortega, Mario; Hernandez, Víctor G; Arce-Paredes, Patricia; Villanueva, Enrique B; Aguilar-Santelises, Miguel; Rojas-Espinosa, Oscar

2015-01-01

Leprosy is a disease consisting of a spectrum of clinical, bacteriological, histopathological and immunological manifestations. Tuberculoid leprosy is frequently recognized as the benign polar form of the disease, while lepromatous leprosy is regarded as the malignant form. The different forms of leprosy depend on the genetic and immunological characteristics of the patient and on the characteristics of the leprosy bacillus. The malignant manifestations of lepromatous leprosy result from the mycobacterial-specific anergy that develops in this form of the disease. Using murine leprosy as a model of anergy in this study, we first induced the development of anergy to Mycobacterium lepraemurium (MLM) in mice and then attempted to reverse it by the administration of dialysable leucocyte extracts (DLE) prepared from healthy (HLT), BCG-inoculated and MLM-inoculated mice. Mice inoculated with either MLM or BCG developed a robust cell-mediated immune response (CMI) that was temporary in the MLM-inoculated group and long-lasting in the BCG-inoculated group. DLE were prepared from the spleens of MLM- and BCG-inoculated mice at the peak of CMI. Independent MLM intradermally-inoculated groups were treated every other day with HLT-DLE, BCG-DLE or MLM-DLE, and the effect was documented for 98 days. DLE administered at a dose of 1.0 U (1 × 106 splenocytes) did not affect the evolution of leprosy, while DLE given at a dose of 0.1 U showed beneficial effects regardless of the DLE source. The dose but not the specificity of DLE was the determining factor for reversing anergy. PMID:25529580

75 FR 70971 - Proposed Collection; Comment Request for Form W-12

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-19

... W-12 AGENCY: Internal Revenue Service, Treasury. ACTION: Notice and request for comments. SUMMARY...-12 IRS Paid Preparer Tax Identification Number (PTIN). DATES: Written comments should be received on...: 1545-2190. Form Number: Form W-12. Abstract: Paid tax return preparers will be required to get a...

48 CFR 1845.7101 - Instructions for preparing NASA Form 1018.

Code of Federal Regulations, 2010 CFR

2010-10-01

... NASA Form 1018. 1845.7101 Section 1845.7101 Federal Acquisition Regulations System NATIONAL AERONAUTICS... Instructions for preparing NASA Form 1018. NASA must account for and report assets in accordance with 31 U.S.C...) instructions. Since contractors maintain NASA's official records for its assets in their possession, NASA must...

48 CFR 1845.7101 - Instructions for preparing NASA Form 1018.

Code of Federal Regulations, 2011 CFR

2011-10-01

... NASA Form 1018. 1845.7101 Section 1845.7101 Federal Acquisition Regulations System NATIONAL AERONAUTICS... Instructions for preparing NASA Form 1018. NASA must account for and report assets in accordance with 31 U.S.C...) instructions. Since contractors maintain NASA's official records for its assets in their possession, NASA must...

48 CFR 1845.7101 - Instructions for preparing NASA Form 1018.

Code of Federal Regulations, 2012 CFR

2012-10-01

... NASA Form 1018. 1845.7101 Section 1845.7101 Federal Acquisition Regulations System NATIONAL AERONAUTICS... Instructions for preparing NASA Form 1018. NASA must account for and report assets in accordance with 31 U.S.C...) instructions. Since contractors maintain NASA's official records for its assets in their possession, NASA must...

48 CFR 1845.7101 - Instructions for preparing NASA Form 1018.

Code of Federal Regulations, 2013 CFR

2013-10-01

... NASA Form 1018. 1845.7101 Section 1845.7101 Federal Acquisition Regulations System NATIONAL AERONAUTICS... Instructions for preparing NASA Form 1018. NASA must account for and report assets in accordance with 31 U.S.C...) instructions. Since contractors maintain NASA's official records for its assets in their possession, NASA must...

48 CFR 1845.7101 - Instructions for preparing NASA Form 1018.

Code of Federal Regulations, 2014 CFR

2014-10-01

... NASA Form 1018. 1845.7101 Section 1845.7101 Federal Acquisition Regulations System NATIONAL AERONAUTICS... Instructions for preparing NASA Form 1018. NASA must account for and report assets in accordance with 31 U.S.C...) instructions. Since contractors maintain NASA's official records for its assets in their possession, NASA must...

Different amorphous solid-state forms of roxithromycin: A thermodynamic and morphological study.

PubMed

Milne, Marnus; Liebenberg, Wilna; Aucamp, Marique Elizabeth

2016-02-10

The striking impact that different preparation methods have on the characteristics of amorphous solid-state forms has attracted considerable attention during the last two decades. The pursuit of more extensive knowledge regarding polyamorphism therefore continues. The aim of this study was firstly, to investigate the influence of different preparation techniques to obtain amorphous solid-state forms for the same active pharmaceutical ingredient, namely roxithromycin. The preparation techniques also report on a method utilizing hot air, which although it is based on a melt intermediary step, is considered a novel preparation method. Secondly, to conduct an in-depth investigation into any physico-chemical differences between the resulting amorphous forms and thirdly, to bring our findings into context with that of previous work done, whilst simultaneously discussing a well-defined interpretation for the term polyamorphism and propose a discernment between true polyamorphism and pseudo-polyamorphism/atypical-polyamorphism. The preparation techniques included melt, solution, and a combination of solution-mechanical disruption as intermediary steps. The resulting amorphous forms were investigated using differential scanning calorimetry, X-ray powder diffraction, hot-stage microscopy, scanning electron microscopy, and vapor sorption. Clear and significant thermodynamic differences were determined between the four amorphous forms. It was also deduced from this study that different preparation techniques have a mentionable impact on the morphological properties of the resulting amorphous roxithromycin powders. Thermodynamic properties as well as the physical characteristics of the amorphous forms greatly governed other physico-chemical properties i.e. solubility and dissolution. Copyright © 2015 Elsevier B.V. All rights reserved.

Production of continuous mullite fiber via sol-gel processing

NASA Technical Reports Server (NTRS)

Tucker, Dennis S.; Sparks, J. Scott; Esker, David C.

1990-01-01

The development of a continuous ceramic fiber which could be used in rocket engine and rocket boosters applications was investigated at the Marshall Space Flight Center. Methods of ceramic fiber production such as melt spinning, chemical vapor deposition, and precursor polymeric fiber decomposition are discussed and compared with sol-gel processing. The production of ceramics via the sol-gel method consists of two steps, hydrolysis and polycondensation, to form the preceramic, followed by consolidation into the glass or ceramic structure. The advantages of the sol-gel method include better homogeneity and purity, lower preparation temperature, and the ability to form unique compositions. The disadvantages are the high cost of raw materials, large shrinkage during drying and firing which can lead to cracks, and long processing times. Preparation procedures for aluminosilicate sol-gel and for continuous mullite fibers are described.

A potentiometric titration method for the crystallization of drug-like organic molecules.

PubMed

Du-Cuny, Lei; Huwyler, Jörg; Fischer, Holger; Kansy, Manfred

2007-09-05

It is generally accepted, that crystalline solids representing a low energy polymorph should be selected for development of oral dosage forms. As a consequence, efficient and robust procedures are needed at an early stage during drug discovery to prepare crystals from drug-like organic molecules. In contrast to the use of supersaturated solutions, we present a potentiometric crystallization procedure where saturated solutions are prepared in a controlled manner by pH-titration. Crystallization is carried out under defined conditions using the sample concentration and experimental pK(a) values as input parameters. Crystals of high quality were obtained for 11 drugs selected to demonstrate the efficiency and applicability of the new method. Technical improvements are suggested to overcome practical limitations and to enhance the possibility of obtaining crystals from molecules in their uncharged form.

32 CFR Appendix A to Part 1290 - Preparation Guide for DD Form 1805, Violation Notice

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Preparation Guide for DD Form 1805, Violation Notice A Appendix A to Part 1290 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS PREPARING AND PROCESSING MINOR OFFENSES AND VIOLATION NOTICES REFERRED TO U.S...

The Preparation of Human Service Professionals.

ERIC Educational Resources Information Center

Gartner, Alan

New forms of preparing workers in the human services have the potential of changing and improving those services. A central feature of the new forms of preparation is that they must both be preparatory for the services and be characteristic of them (for example, if the services are participatory in nature, the training should also be so). There is…

32 CFR Appendix A to Part 1290 - Preparation Guide for DD Form 1805, Violation Notice

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Preparation Guide for DD Form 1805, Violation Notice A Appendix A to Part 1290 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS PREPARING AND PROCESSING MINOR OFFENSES AND VIOLATION NOTICES REFERRED TO U.S...

32 CFR Appendix A to Part 1290 - Preparation Guide for DD Form 1805, Violation Notice

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Preparation Guide for DD Form 1805, Violation Notice A Appendix A to Part 1290 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS PREPARING AND PROCESSING MINOR OFFENSES AND VIOLATION NOTICES REFERRED TO U.S...

32 CFR Appendix A to Part 1290 - Preparation Guide for DD Form 1805, Violation Notice

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Preparation Guide for DD Form 1805, Violation Notice A Appendix A to Part 1290 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS PREPARING AND PROCESSING MINOR OFFENSES AND VIOLATION NOTICES REFERRED TO U.S...

[Pectolytic enzymes formed by Penicillium and Fusarium micromycetes].

PubMed

Devdariani, T G; Aĭzenberg, V L; Bilaĭ, T I; Zakordonets, L A; Mudzhiri, L A

1982-01-01

The ability of the two cultures Penicillium sp. and Fusarium sp. to synthesize extracellular pectolytic enzymes was investigated. The cultivation conditions providing a high level of the biosynthesis of these enzymes were identified. The methods of isolating the enzymes by means of organic solvents were developed. The pectinase from Penicillium sp. showed a higher thermostability whereas that from Fusarium sp. displayed a greater acid resistance. Using glutaraldehyde and titanium salts, active immobilized forms of pectinases on silica carriers were prepared.

Development and in vitro evaluation of expandable gastroretentive dosage forms based on compressed collagen sponges.

PubMed

Gröning, R; Cloer, C; Müller, R S

2006-07-01

The objective of this study was to develop and evaluate new collagen gastroretentive dosage forms (GRDFs) which expand in the stomach after contact with gastric fluids. The GRDFs should remain in the stomach for a prolonged period of time due to their size. The dosage forms were prepared from collagen sponges. The sponges were manufactured by freeze-drying a riboflavin-containing collagen solution. A computer controlled material supply was constructed to transport precompressed collagen into a tablet machine. A second type of tablet was manufactured by combining compressed collagen sponges with hydrophilic matrix layers of hydroxypropylmethylcellulose. Matrix layers containing captopril or aciclovir were developed. In vitro experiments were performed with both types of dosage forms. The collagen tablets expand within a few minutes after contact with artificial gastric juice and form a drug delivery system with a size of 8 mm x 18 mm x 60 mm. Riboflavin is released over 16 h. If two layer tablets are used, the release of aciclovir or captopril can be controlled by the composition of the sustained release layer.

Electrochemical slurry compositions and methods for preparing the same

DOEpatents

Doherty, Tristan; Limthongkul, Pimpa; Butros, Asli; Duduta, Mihai; Cross, III, James C.

2016-11-01

Embodiments described herein generally relate to semi-solid suspensions, and more particularly to systems and methods for preparing semi-solid suspensions for use as electrodes in electrochemical devices such as, for example batteries. In some embodiments, a method for preparing a semi-solid electrode includes combining a quantity of an active material with a quantity of an electrolyte to form an intermediate material. The intermediate material is then combined with a conductive additive to form an electrode material. The electrode material is mixed to form a suspension having a mixing index of at least about 0.80 and is then formed into a semi-solid electrode.

Enzyme-catalyzed crosslinkable hydrogels: emerging strategies for tissue engineering.

PubMed

Teixeira, Liliana S Moreira; Feijen, Jan; van Blitterswijk, Clemens A; Dijkstra, Pieter J; Karperien, Marcel

2012-02-01

State-of-the-art bioactive hydrogels can easily and efficiently be formed by enzyme-catalyzed mild-crosslinking reactions in situ. Yet this cell-friendly and substrate-specific method remains under explored. Hydrogels prepared by using enzyme systems like tyrosinases, transferases and lysyl oxidases show interesting characteristics as dynamic scaffolds and as systems for controlled release. Increased attention is currently paid to hydrogels obtained via crosslinking of precursors by transferases or peroxidases as catalysts. Enzyme-mediated crosslinking has proven its efficiency and attention has now shifted to the development of enzymatically crosslinked hydrogels with higher degrees of complexity, mimicking extracellular matrices. Moreover, bottom-up approaches combining biocatalysts and self-assembly are being explored for the development of complex nano-scale architectures. In this review, the use of enzymatic crosslinking for the preparation of hydrogels as an innovative alternative to other crosslinking methods, such as the commonly used UV-mediated photo-crosslinking or physical crosslinking, will be discussed. Photo-initiator-based crosslinking may induce cytotoxicity in the formed gels, whereas physical crosslinking may lead to gels which do not have sufficient mechanical strength and stability. These limitations can be overcome using enzymes to form covalently crosslinked hydrogels. Herewith, we report the mechanisms involved and current applications, focusing on emerging strategies for tissue engineering and regenerative medicine. Copyright © 2011 Elsevier Ltd. All rights reserved.

Development of a Topical Resveratrol Formulation for Commercial Applications Using Dendrimer Nanotechnology.

PubMed

Pentek, Tyler; Newenhouse, Eric; O'Brien, Brennin; Chauhan, Abhay Singh

2017-01-14

Resveratrol (RSV) is well known for its anti-oxidant and anti-aging properties. However, resveratrol is insoluble in water and has stability issues. Recently, efforts were placed to prepare a resveratrol-based advanced anti-aging topical product but it contains harsh organic solvents and oils that could be harmful to the human body and the environment. Hence, we propose the use of a multifunctional dendrimer to solve the solubility and stability issues of resveratrol. A dendrimer-resveratrol complex was prepared, optimized and tested for solubility enhancement, stability in solution and cream dosage forms. We have also developed a high performance liquid chromatography method to measure the resveratrol within the final product. PAMAM dendrimers increased the solubility and stability of resveratrol in water and semisolid dosage forms. Therefore, this product would be water based 'green' formulation devoid of harsh organic solvents and oils and can be safely applied to the skin. Additionally, we have shown that the dendrimer helped to increase overall RSV loading and skin penetration of resveratrol. The dendrimer-RSV formulation was successfully scaled up towards commercialization. Dendrimer with RSV has led to an innovation in anti-aging cream and solutions that could be commercially marketed. Dendrimer-RSV complex could also be added to other product forms for additional purposes and applications.

Development and validation of multivariate calibration methods for simultaneous estimation of Paracetamol, Enalapril maleate and hydrochlorothiazide in pharmaceutical dosage form

NASA Astrophysics Data System (ADS)

Singh, Veena D.; Daharwal, Sanjay J.

2017-01-01

Three multivariate calibration spectrophotometric methods were developed for simultaneous estimation of Paracetamol (PARA), Enalapril maleate (ENM) and Hydrochlorothiazide (HCTZ) in tablet dosage form; namely multi-linear regression calibration (MLRC), trilinear regression calibration method (TLRC) and classical least square (CLS) method. The selectivity of the proposed methods were studied by analyzing the laboratory prepared ternary mixture and successfully applied in their combined dosage form. The proposed methods were validated as per ICH guidelines and good accuracy; precision and specificity were confirmed within the concentration range of 5-35 μg mL- 1, 5-40 μg mL- 1 and 5-40 μg mL- 1of PARA, HCTZ and ENM, respectively. The results were statistically compared with reported HPLC method. Thus, the proposed methods can be effectively useful for the routine quality control analysis of these drugs in commercial tablet dosage form.

Containerless processing of glass forming melts in space

NASA Technical Reports Server (NTRS)

Day, D. E.; Ray, C. S.

1988-01-01

The near weightlessness of a material in the reduced gravity environment of space offers the opportunity of melting and cooling glass forming compositions without a container. This reduces the heterogeneous nucleation/crystallization which usually occurs at the walls of the container, thereby, extending the range of glass forming compositions. Based primarily on this idea, containerless glass forming experiments, which used a single axis acoustic levitator/furnace (SAAL), were conducted on SPAR rocket flights, 6 and 8, and on Space Shuttle mission, STS-7 and STS-61A. The experiments on the Space Shuttle were designed to include other studies related to melt homogenization and mixing, development of techniques for preparing uncontaminated preflight samples, and simple shaping experiments.

Preparation of non-metals properties for data base

NASA Technical Reports Server (NTRS)

1988-01-01

The development of non-metallic material properties data bases is discussed. The data bases consist of the non-metallic material classes of adhesives, adhesive/sealants, plastics, and elastomers. A specifications data base was also developed to incorporate material specifications data as a supplement to the Elastomers Data Base. Examples of the forms used are provided to show the properties of the materials which appear in the data base.

Method for preparing hydrous titanium oxide spherules and other gel forms thereof

DOEpatents

Collins, J.L.

1998-10-13

The present invention are methods for preparing hydrous titanium oxide spherules, hydrous titanium oxide gels such as gel slabs, films, capillary and electrophoresis gels, titanium monohydrogen phosphate spherules, hydrous titanium oxide spherules having suspendible particles homogeneously embedded within to form a composite sorbent, titanium monohydrogen phosphate spherules having suspendible particles of at least one different sorbent homogeneously embedded within to form a composite sorbent having a desired crystallinity, titanium oxide spherules in the form of anatase, brookite or rutile, titanium oxide spherules having suspendible particles homogeneously embedded within to form a composite, hydrous titanium oxide fiber materials, titanium oxide fiber materials, hydrous titanium oxide fiber materials having suspendible particles homogeneously embedded within to form a composite, titanium oxide fiber materials having suspendible particles homogeneously embedded within to form a composite and spherules of barium titanate. These variations of hydrous titanium oxide spherules and gel forms prepared by the gel-sphere, internal gelation process offer more useful forms of inorganic ion exchangers, catalysts, getters and ceramics. 6 figs.

Method for preparing hydrous titanium oxide spherules and other gel forms thereof

DOEpatents

Collins, Jack L.

1998-01-01

The present invention are methods for preparing hydrous titanium oxide spherules, hydrous titanium oxide gels such as gel slabs, films, capillary and electrophoresis gels, titanium monohydrogen phosphate spherules, hydrous titanium oxide spherules having suspendible particles homogeneously embedded within to form a composite sorbent, titanium monohydrogen phosphate spherules having suspendible particles of at least one different sorbent homogeneously embedded within to form a composite sorbent having a desired crystallinity, titanium oxide spherules in the form of anatase, brookite or rutile, titanium oxide spherules having suspendible particles homogeneously embedded within to form a composite, hydrous titanium oxide fiber materials, titanium oxide fiber materials, hydrous titanium oxide fiber materials having suspendible particles homogeneously embedded within to form a composite, titanium oxide fiber materials having suspendible particles homogeneously embedded within to form a composite and spherules of barium titanate. These variations of hydrous titanium oxide spherules and gel forms prepared by the gel-sphere, internal gelation process offer more useful forms of inorganic ion exchangers, catalysts, getters and ceramics.

[Preparation of scopolamine hydrobromide nanoparticles-in-microsphere system].

PubMed

Lü, Wei-ling; Hu, Jin-hong; Zhu, Quan-gang; Li, Feng-qian

2010-07-01

This study is to prepare scopolamine hydrobromide nanoparticles-in-microsphere system (SH-NiMS) and evaluate its drug release characteristics in vitro. SH nanoparticles were prepared by ionic crosslinking method with tripolyphosphate (TPP) as crosslinker and chitosan as carrier. Orthogonal design was used to optimize the formulation of SH nanoparticles, which took the property of encapsulation efficiency and drug loading as evaluation parameters. With HPMC as carrier, adjusted the parameters of spray drying technique and sprayed the SH nanoparticles in microspheres encaposulated by HPMC was formed and which is called nanoparticles-in-microsphere system (NiMS). SH-NiMS appearances were observed by SEM, structure was obsearved by FT-IR and the release characteristics in vitro were evaluated. The optimized formulation of SH nanoparticles was TPP/CS 1:3 (w/w), HPMC 0.3%, SH 0.2%. The solution peristaltic speed of the spray drying technique was adjusted to 15%, and the temperature of inlet was 110 degrees C. The encapsulation product yeild, drug loading and particle sizes of SH-NiMS were 94.2%, 20.4%, and 1256.5 nm, respectively. The appearances and the structure of SH-NiMS were good. The preparation method of SH-NiMS is stable and reliable to use, which provide a new way to develop new dosage form.

A Biocompatible and Biodegradable Protein Hydrogel with Green and Red Autofluorescence: Preparation, Characterization and In Vivo Biodegradation Tracking and Modeling

PubMed Central

Ma, Xiaoyu; Sun, Xiangcheng; Hargrove, Derek; Chen, Jun; Song, Donghui; Dong, Qiuchen; Lu, Xiuling; Fan, Tai-Hsi; Fu, Youjun; Lei, Yu

2016-01-01

Because of its good biocompatibility and biodegradability, albumins such as bovine serum albumin (BSA) and human serum albumin (HSA) have found a wide range of biomedical applications. Herein, we report that glutaraldehyde cross-linked BSA (or HSA) forms a novel fluorescent biological hydrogel, exhibiting new green and red autofluorescence in vitro and in vivo without the use of any additional fluorescent labels. UV-vis spectra studies, in conjunction with the fluorescence spectra studies including emission, excitation and synchronous scans, indicated that three classes of fluorescent compounds are presumably formed during the gelation process. SEM, FTIR and mechanical tests were further employed to investigate the morphology, the specific chemical structures and the mechanical strength of the as-prepared autofluorescent hydrogel, respectively. Its biocompatibility and biodegradability were also demonstrated through extensive in vitro and in vivo studies. More interestingly, the strong red autofluorescence of the as-prepared hydrogel allows for conveniently and non-invasively tracking and modeling its in vivo degradation based on the time-dependent fluorescent images of mice. A mathematical model was proposed and was in good agreement with the experimental results. The developed facile strategy to prepare novel biocompatible and biodegradable autofluorescent protein hydrogels could significantly expand the scope of protein hydrogels in biomedical applications. PMID:26813916

48 CFR 1852.246-72 - Material inspection and receiving report.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Receiving Report (DD Form 250 series) prepared in __ [Insert number of copies, including original] copies, an original and __ copies [Insert number of copies]. (b) The Contractor shall prepare the DD Form 250 in accordance with NASA FAR Supplement 1846.6. The Contractor shall enclose the copies of the DD Form...

32 CFR 516.25 - DA Form 4.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 3 2011-07-01 2009-07-01 true DA Form 4. 516.25 Section 516.25 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS... properly prepared and sealed DA Form 4 are self-authenticating. (See Fed. R. Evid. 902). (b) Preparation at...

32 CFR 516.25 - DA Form 4.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 3 2012-07-01 2009-07-01 true DA Form 4. 516.25 Section 516.25 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS... properly prepared and sealed DA Form 4 are self-authenticating. (See Fed. R. Evid. 902). (b) Preparation at...

Recent trends in the determination of vitamin D.

PubMed

Gomes, Fabio P; Shaw, P Nicholas; Whitfield, Karen; Koorts, Pieter; Hewavitharana, Amitha K

2013-12-01

The occurrence of vitamin D deficiency has become an issue of serious concern in the worldwide population. As a result numerous analytical methods have been developed, for a variety of matrices, during the last few years to measure vitamin D analogs and metabolites. This review employs a comprehensive search of all vitamin D methods developed during the last 5 years for all applications, using ISI Web of Science(®), Scifinder(®), Science Direct, Scopus and PubMed. Particular emphasis is given to sample-preparation methods and the different forms of vitamin D measured across different fields of applications such as biological fluids, food and pharmaceutical preparations. This review compares and critically evaluates a wide range of approaches and methods, and hence it will enable readers to access developments across a number of applications and to select or develop the optimal analytical method for vitamin D for their particular application.

The Computerized Anatomical Man (CAM) model

NASA Technical Reports Server (NTRS)

Billings, M. P.; Yucker, W. R.

1973-01-01

A computerized anatomical man (CAM) model, representing the most detailed and anatomically correct geometrical model of the human body yet prepared, has been developed for use in analyzing radiation dose distribution in man. This model of a 50-percentile standing USAF man comprises some 1100 unique geometric surfaces and some 2450 solid regions. Internal body geometry such as organs, voids, bones, and bone marrow are explicitly modeled. A computer program called CAMERA has also been developed for performing analyses with the model. Such analyses include tracing rays through the CAM geometry, placing results on magnetic tape in various forms, collapsing areal density data from ray tracing information to areal density distributions, preparing cross section views, etc. Numerous computer drawn cross sections through the CAM model are presented.

Poly(aryl ethers) and related polysiloxane copolymer molecular coatings: Preparation and radiation degradation

NASA Technical Reports Server (NTRS)

Mcgrath, J. E.

1982-01-01

The radiation degradation of poly(arylene ether sulfones) and related materials is studied. These basic studies are important both as a means to developing stronger, more stable matrix resins for composite materials, as well as to improve the data base in regard to chemical structure-physical property relationships. Thirty homo and copolymers were synthesized, at least partially characterized and, in several cases suitable film casting techniques were developed. Four samples were chosen for initial radiation degradation. Poly(dimethyl siloxane) soft bocks/segments can preferentially migrate to the surface of copolymer films. Since siloxanes are utilized as thermal control coatings, this form of 'molecular' coating is of interest. The chemistry for preparing such copolymers with any of the polymers described was demonstrated.

The effect of herbal remedy on the development of Trichinella spiralis infection in mice.

PubMed

Bany, J; Zdanowska, D; Zdanowski, R; Skopińska-Rózewska, E

2003-01-01

The effect of Alchinal (a complex preparation consisting of three substances: Echinacea purpurea extract, Allium sativum extract, cocoa) on the development of Trichinella spiralis infection in mice was studied. The preparation was administered to the animals orally, twice a day in 30 microl doses for 10 days after infecting mice with Trichinella larvae (500 larvae per mouse). It was demonstrated that after Alchinal administration, the number of adult forms (10 dpi--days post infection) and muscular larvae (36 dpi) significantly decreased. It is suggested that the remedy studied causes antiparasitic immunity enhancement in mice. Modulation of immunity by individual component(s) and/or joint action of the substances contained in Alchinal increases the antiparasitic defence of the organism.

Interactive Technologies for Teacher Training: Comparing Performance and Assessment in Second Life and simSchool

ERIC Educational Resources Information Center

Meritt, Julia; Gibson, David; Christensen, Rhonda; Knezek, Gerald

2013-01-01

Two alternative technologies forming the basis of computer-mediated teacher preparation systems are compared and contrasted regarding implementation, operation, and assessment considerations. The role-playing system in Second Life is shown to have the unique characteristic of developing a co-constructed pedagogical identity, while the flight…

Developing Objective Criteria for Evaluating Student Athletic Trainers.

ERIC Educational Resources Information Center

Treadway, Linda

In devising a form for the evaluation of students preparing to become athletic trainers, it is helpful to have a checklist in which objectives and behavioral responses are organized into categories, such as prevention of injury, first aid, emergency care, treatment, rehabilitation, and taping and wrapping. It is also important to have records and…

Properties of oleogels formed with high-stearic soybean oils and sunflower wax

USDA-ARS?s Scientific Manuscript database

In an effort to develop alternatives for harmful trans fats produced by hydrogenation of vegetable oils, oleogels of high stearic soybean (A6 and MM106) oils were prepared with sunflower wax as oleogelator. Oleogels of high stearic oils did not have greater firmness than that of regular soybean oil ...

Interreligious Learning as a Precondition for Peace Education: Lessons from the Past--John Amos Comenius (1592-1670)

ERIC Educational Resources Information Center

Rietveld-van Wingerden, Marjoke; ter Avest, Ina; Westerman, Wim

2012-01-01

During the last decades the concept of interreligious education has been developed in which exploration and personal identity formation form important aspects. The increasing multi-cultural and multi-religious society requires open, respectful, and tolerant attitudes for which schools have to prepare. Therefore, theorists on interreligious…

Emerging aspects of dietary glutamate metabolism in the developing gut

USDA-ARS?s Scientific Manuscript database

Glutamate is a major constituent of dietary protein and is also consumed in many prepared foods as a flavour additive in the form of monosodium glutamate (MSG). Evidence from human and animal studies indicates that glutamate is the major oxidative fuel for the gut and that dietary glutamate is exten...

75 FR 16080 - Notice of Intent To Prepare an Environmental Impact Statement for Basewide Water Infrastructure...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

...- design and to develop additional alternatives for analysis. These two water infrastructure projects are... carbon, and reverse osmosis. The facility would be designed in modular form for ease of expandability... lighting, asphalt pavement, and pavement marking and signs. The project includes ``100-year storm'' flood...

Developing a Model on Improving Maritime English Training for Maritime Transportation Safety

ERIC Educational Resources Information Center

Yercan, Funda; Fricke, Donna; Stone, Laurie

2005-01-01

Maritime services form an integral part of what regulatory agencies requires for the safe navigation and operation of vessels. Therefore, the maritime industry's compliance with governmental regulations and international protocols has been essential for maritime safety management. As a basis to this aspect, the preparation of maritime students as…

Composite lamination method

NASA Technical Reports Server (NTRS)

Dickerson, G. E. (Inventor)

1977-01-01

A process was developed for preparing relatively thick composite laminate structure wherein thin layers of prepreg tapes are assembled, these thin layers are cut into strips that are partially cured, and stacked into the desired thickness with uncured prepreg disposed between each layer of strips. The formed laminate is finally cured and thereafter machined to the desired final dimensions.

Preparation of phosphines through C–P bond formation

PubMed Central

Wauters, Iris; Debrouwer, Wouter

2014-01-01

Summary Phosphines are an important class of ligands in the field of metal-catalysis. This has spurred the development of new routes toward functionalized phosphines. Some of the most important C–P bond formation strategies were reviewed and organized according to the hybridization of carbon in the newly formed C–P bond. PMID:24991257

Nurse Educators Utilizing Narratives with Technology to Improve the Student Learning Experience

ERIC Educational Resources Information Center

Tomasino, Jeanette R.

2018-01-01

Nursing education must evolve with the ever-changing forms of communication and technology and recognize generational differences in learning. The use of technology has created many opportunities to develop new teaching strategies in nursing education. Students today require and demand new educational approaches. The need to prepare students for a…

Orodispersible films and tablets with prednisolone microparticles.

PubMed

Brniak, Witold; Maślak, Ewelina; Jachowicz, Renata

2015-07-30

Orodispersible tablets (ODTs) and orodispersible films (ODFs) are solid oral dosage forms disintegrating or dissolving rapidly when placed in the mouth. One of the main issues related to their preparation is an efficient taste masking of a bitter drug substance. Therefore, the aim of this study was to prepare and evaluate the microparticles intended to mask a bitter taste of the prednisolone and use them in further preparation of two orodispersible dosage forms. Microparticles based on the Eudragit E PO or E 100 as a taste-masking agent were prepared with spray-drying technique. Tablets containing microparticles, co-processed ODT excipient Pharmaburst, and lubricant were directly compressed with single-punch tablet press. Orodispersible films were prepared by casting polymeric solutions of hydroxypropyl methylcellulose containing uniformly dispersed microparticles. Physicochemical properties of microparticles were evaluated, as well as mechanical properties analysis, disintegration time measurements and dissolution tests were performed for prepared dosage forms. Both formulations showed good mechanical resistance while maintaining excellent disintegration properties. The dissolution studies showed good masking properties of microparticles with Eudragit E 100. The amount of prednisolone released during the first minute in phosphate buffer 6.8 was around 0.1%. After incorporation into the orodispersible forms, the amount of released prednisolone increased significantly. It was probably the effect of faster microparticles wetting in orodispersible forms and their partial destruction by compression force during tableting process. Copyright © 2015 Elsevier B.V. All rights reserved.

Cationic Albumin Nanoparticles for Enhanced Drug Delivery to Treat Breast Cancer: Preparation and In Vitro Assessment

PubMed Central

Abbasi, Sana; Paul, Arghya; Shao, Wei; Prakash, Satya

2012-01-01

Most anticancer drugs are greatly limited by the serious side effects that they cause. Doxorubicin (DOX) is an antineoplastic agent, commonly used against breast cancer. However, it may lead to irreversible cardiotoxicity, which could even result in congestive heart failure. In order to avoid these harmful side effects to the patients and to improve the therapeutic efficacy of doxorubicin, we developed DOX-loaded polyethylenimine- (PEI-) enhanced human serum albumin (HSA) nanoparticles. The formed nanoparticles were ~137 nm in size with a surface zeta potential of ~+15 mV, prepared using 20 μg of PEI added per mg of HSA. Cytotoxicity was not observed with empty PEI-enhanced HSA nanoparticles, formed with low-molecular weight (25 kDa) PEI, indicating biocompatibility and safety of the nanoparticle formulation. Under optimized transfection conditions, approximately 80% of cells were transfected with HSA nanoparticles containing tetramethylrhodamine-conjugated bovine serum albumin. Conclusively, PEI-enhanced HSA nanoparticles show potential for developing into an effective carrier for anticancer drugs. PMID:22187654

Characterization and evaluation of the Ag+-loaded soy protein isolate-based bactericidal film-forming dispersion and films.

PubMed

Sun, Qingshen; Li, Xiaodi; Wang, Pu; Du, Yiyang; Han, Dequan; Wang, Fengjiao; Liu, Xumei; Li, Pengfei; Fu, Honggang

2011-08-01

This study aims to prepare bactericidal films developed from soy protein isolate (SPI) based film-forming dispersions (FFDs) for use in the food and medical fields. The FFD and films were prepared after the incorporation of different concentrations of AgNO₃ as a bactericidal agent. The transparency, tensile strength, and antimicrobial features were evaluated. Structural characterizations were also performed by Fourier transform infrared spectroscopy, scanning electron microscope, and atomic force microscopy analysis. Results showed that the opacity of these FFD was greatly decreased after the incorporation of AgNO₃. The SPI-5 film has the largest tensile strength (P < 0.05) compared with that of the other ones. Micro structural imaging analysis showed an increase in the surface irregularities with the addition of AgNO₃. The minimum inhibitory concentration of AgNO₃ was 336 μg/mL FFD for both Escherichia coli ATCC 25923 and Staphylococcus aureus ATCC 25922. The SPI-AgNO₃ films developed from the FFD with the minimal AgNO₃ concentration at 336 μg/mL FFD also showed bactericidal effects for both the strains. These results may prove promising for the use of SPI-AgNO₃ films in the food or medical industries. The films prepared in this study are biodegradable and will be used in medical and food fields. © 2011 Institute of Food Technologists®

Development and Validation of Spectrofluorimetric Method for Determination of Biotin in Bulk and Pharmaceutical Preparations via its Oxidation with Cerium (IV)

PubMed Central

Walash, M. I.; Rizk, M.; Sheribah, Z. A.; Salim, M. M.

2010-01-01

A simple and sensitive spectrofluorimetric method was developed for the determination of biotin in pure form and in pharmaceutical preparations. The proposed method is based on the oxidation of the drug with cerium (IV) ammonium sulfate in acidic medium. The fluorescence of the produced Cerium (III) was measured at 365 nm after excitation at 255 nm. The different experimental parameters affecting the development and stability of the reaction were carefully studied and optimized. The method is applicable over the concentration range of 30-120 ng/mL with correlation coefficient of 0.9998. The detection limit (LOD) of biotin was 2.41 ng/mL while quantitation limit (LOQ) was 7.29 ng/mL. The proposed procedure was successfully applied for the determination of biotin in pharmaceutical preparations with mean recoveries of 99.55 ± 0.83 and 101.67 ± 1.53 for biotin ampoules and capsules, respectively. The results obtained were in good agreement with those obtained using the official method. PMID:23675202

Low level drug product API form analysis - Avalide tablet NIR quantitative method development and robustness challenges.

PubMed

Pan, Duohai; Crull, George; Yin, Shawn; Grosso, John

2014-02-01

Avalide(@), a medication used for the treatment of hypertension, is a combination of Irbesartan, and Hydrochlorothiazide. Irbesartan, one of the active pharmaceutical ingredients (API) in Avalide products, exists in two neat crystalline forms: Form A and Form B. Irbesartan Form A is the API form used in a wet granulation for the preparation of Avalide tablets. The presence of the less soluble Irbesartan Form B in Avalide tablets may result in the slower dissolution. In this paper, we have presented our work on the method development, verification and challenges of quantitatively detecting, via NIR and ssNMR, very small amounts of Irbesartan Form B in Avalide tablets. As part of the NIR method development and qualification, limit of detection, linearity and accuracy were examined. In addition, a limited study of the robustness of the method was conducted and a bias in the level of Form B was correlated to the ambient humidity. ssNMR, a primary method for the determination of polymorphic composition, was successfully used as an orthogonal technique to verify the accuracy of the NIR method and added to the confidence in the NIR method. The speed and efficiency of the NIR method make it a suitable and convenient tool for routine analysis of Avalide tablets for Form B in a QC environment. Copyright © 2013 Elsevier B.V. All rights reserved.

Determination of the main solid-state form of albendazole in bulk drug, employing Raman spectroscopy coupled to multivariate analysis.

PubMed

Calvo, Natalia L; Arias, Juan M; Altabef, Aída Ben; Maggio, Rubén M; Kaufman, Teodoro S

2016-09-10

Albendazole (ALB) is a broad-spectrum anthelmintic, which exhibits two solid-state forms (Forms I and II). The Form I is the metastable crystal at room temperature, while Form II is the stable one. Because the drug has poor aqueous solubility and Form II is less soluble than Form I, it is desirable to have a method to assess the solid-state form of the drug employed for manufacturing purposes. Therefore, a Partial Least Squares (PLS) model was developed for the determination of Form I of ALB in its mixtures with Form II. For model development, both solid-state forms of ALB were prepared and characterized by microscopic (optical and with normal and polarized light), thermal (DSC) and spectroscopic (ATR-FTIR, Raman) techniques. Mixtures of solids in different ratios were prepared by weighing and mechanical mixing of the components. Their Raman spectra were acquired, and subjected to peak smoothing, normalization, standard normal variate correction and de-trending, before performing the PLS calculations. The optimal spectral region (1396-1280cm(-1)) and number of latent variables (LV=3) were obtained employing a moving window of variable size strategy. The method was internally validated by means of the leave one out procedure, providing satisfactory statistics (r(2)=0.9729 and RMSD=5.6%) and figures of merit (LOD=9.4% and MDDC=1.4). Furthermore, the method's performance was also evaluated by analysis of two validation sets. Validation set I was used for assessment of linearity and range and Validation set II, to demonstrate accuracy and precision (Recovery=101.4% and RSD=2.8%). Additionally, a third set of spiked commercial samples was evaluated, exhibiting excellent recoveries (94.2±6.4%). The results suggest that the combination of Raman spectroscopy with multivariate analysis could be applied to the assessment of the main crystal form and its quantitation in samples of ALB bulk drug, in the routine quality control laboratory. Copyright © 2016 Elsevier B.V. All rights reserved.

Development and Characterization of Novel Polyurethane Films Impregnated with Tolfenamic Acid for Therapeutic Applications

PubMed Central

Sheraz, Muhammad Ali; Rehman, Ihtesham ur

2013-01-01

The present study deals with the preparation of polyurethane (PU) films impregnated with a nonsteroidal anti-inflammatory drug, tolfenamic acid (TA). Solvent evaporation technique has been employed for the preparation of TA-PU films in two different ratios of 1 : 2 and 1 : 5 in Tetrahydrofuran (THF) or THF-ethanol mixtures. The prepared films were characterized using X-Ray Diffraction (XRD), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and release studies. The results indicate transformation of crystalline TA to its amorphous form. The degree of crystallinity changes both by increasing the polymer concentration and solvent used for the film preparations. The release profiles of TA were also found to be affected, showing a decrease from approximately 50% to 25% from 1 : 2 to 1 : 5 ratios, respectively. PMID:24073394

Fabrication of GaAs symmetric pyramidal mesas prepared by wet-chemical etching using AlAs interlayer

NASA Astrophysics Data System (ADS)

Kicin, S.; Cambel, V.; Kuliffayová, M.; Gregušová, D.; Kováčová, E.; Novák, J.; Kostič, I.; Förster, A.

2002-01-01

We present a wet-chemical-etching method developed for the preparation of GaAs four-sided pyramid-shaped mesas. The method uses a fast lateral etching of AlAs interlayer that influences the cross-sectional profiles of etched structures. We have tested the method using H3PO4:H2O2:H2O etchant for the (100) GaAs patterning. The sidewalls of the prepared pyramidal structures together with the (100) bottom facet formed the cross-sectional angles 25° and 42° for mask edges parallel, resp. perpendicular to {011} cleavage planes. For mask edges turned in 45° according to the cleavage planes, 42° cross-sectional angles were obtained. Using the method, symmetric and more than 10-μm-high GaAs "Egyptian" pyramids with smooth tilted facets were prepared.

A moderate method for preparation DMSA coated Fe3O4 nanoparticles

NASA Astrophysics Data System (ADS)

Song, L. N.; Gu, N.; Zhang, Y.

2017-01-01

A moderate way to prepare water soluble magnetic Fe3O4 nanoparticles has been developed. Firstly, oleic acid coated Fe3O4 is prepared by coprecipitation. Second, oleic acid were replaced by 2,3-dimercaptosuccinnic acid (DMSA) to prepare DMSA/Fe3O4 in the mixed solution of n-hexane and acetone. After dialysis and filtration the DMSA/Fe3O4 can be transferred into distilled water to form stable Fe3O4 nanoparticle solutions. The TEM images indicated that the particles had spherical shape and the nanoparticles were found to be 12 nm with a relatively narrow size distribution with the hydrodynamic size of 30 nm. And the result of VSM shows that DMSA/Fe3O4 nanoparticles have a saturation magnetization of 31 emu/g. The IR spectra indicated that the iron oxide was located by carboxyl matrix.

Treatment of Tinea Pedis in Elderly Patients Using External Preparations.

PubMed

Otani, Michiteru

2017-01-01

Infection rate of tinea pedis is high in the elderly, wherein treatment by a dermatologist should be considered to prevent infecting their family members. About 90 percent of cases with tinea pedis is treated only using external preparations. In treating the elderly with tinea pedis using external preparation, we should take into consideration that the elderly have thinner and weaker skin compared to younger people. There are many kinds of dosage form (cream, ointments, lotion, spray, and so on) for external preparations to treat tinea pedis. Generally, liquid forms such as lotions and sprays cause stronger irritation compared to ointments and creams, thus, caution should be taken for side effects when applying them to the elderly. Contact dermatitis is the most frequent side effect of external preparations. Caution should also be taken for the type of additives used. The composition of the preparation should be checked when changing dosage forms, or when switching brand-name drugs to generic drugs. Since the adherence rate of external preparations is low, it is preferable to use those with strong antibacterial activity and only have to be applied once a day.

A word processor optimized for preparing journal articles and student papers.

PubMed

Wolach, A H; McHale, M A

2001-11-01

A new Windows-based word processor for preparing journal articles and student papers is described. In addition to standard features found in word processors, the present word processor provides specific help in preparing manuscripts. Clicking on "Reference Help (APA Form)" in the "File" menu provides a detailed help system for entering the references in a journal article. Clicking on "Examples and Explanations of APA Form" provides a help system with examples of the various sections of a review article, journal article that has one experiment, or journal article that has two or more experiments. The word processor can automatically place the manuscript page header and page number at the top of each page using the form required by APA and Psychonomic Society journals. The "APA Form" submenu of the "Help" menu provides detailed information about how the word processor is optimized for preparing articles and papers.

Development of high Tc (greater than 100 K) Bi, Tl and Y-based materials as superconducting circuit elements

NASA Technical Reports Server (NTRS)

Haertling, Gene; Grabert, Gregory; Gilmour, Phillip

1994-01-01

Experimental work on this project over the last four years has resulted in establishing processing and characterization techniques for producing both the Bi-based and Tl-based superconductors in their high temperature (2223) forms. In the bulk, dry pressed form, maximum critical temperatures (Tc) of 108.2 K and 117.8 K, respectively, were measured. Results have further shown that the Bi and Tl-based superconducting materials in bulk form are noticeably different from the Y-based 123 material in that superconductivity is considerably harder to achieve, maintain, and reproduce. This is due primarily to the difficulty in obtaining the higher Tc phase in pure form since it commonly co-exists with other undesirable, lower Tc phases. In particular, it has been found that long processing times for calcining and firing (20 - 200 hrs.) and close control of temperatures which are very near the melting point are required in order to obtain higher proportions of the desirable, high Tc (2223) phase. Thus far, the BSCCO bulk materials has been prepared in uniaxially pressed, hot pressed, and tapecast form. The uniaxially pressed material has been synthesized by the mixed oxide, coprecipitation, and melt quenching processes. The tapecast and hot pressed materials have been prepared via the mixed oxide process. In addition, thick films of BSCCO (2223 phase) have been prepared by screen printing on to yttria and magnesia stabilized zirconia with only moderate success; i.e., superconductivity was achieved in these thick films, but the highest Tc obtained in these films was 89.0 K. The Tc's of the bulk hot pressed, tapecast, and screen printed thick film materials were found to be 108.2, 102.4, and 89.0 K, respectively.

[Biological preparations with different mechanism of action for protecting potato against fungal diseases].

PubMed

Kulikov, S N; Alimova, F K; Zakharova, N G; Nemtsev, S V; Varlamov, V P

2006-01-01

Mycological analysis throughout the vegetation period of potato (Solanum tuberosum) made it possible to study in detail the structure of micromycete community, to determine typical dominant (frequency, more than 60%), typical common (frequency, 30 to 60%), typical rare (frequency, 10 to 30%), and casual (frequency, less than 10%) species and to estimate changes in the microorganism community caused by plant protection preparations with different mechanisms of action. It was shown that, as a result of occurrence of resistant forms, synthetic preparations against fungal pathogens of potato (such as TMTD, Ridomil gold MC, and Cupricol) were only slightly more effective than biological preparations (Trichodermin and AgroChit), with the former considerably changing the natural saprophytic mycological community. An increase in the soil pool of Trichoderma harzianum as a result of application of a biological preparation based on this antagonistic fungus correlated with its effectiveness against the soil pathogen Fusarium sp., which causes root rots. A chitosan-based elicitor preparation more effectively suppressed the development of early (Alternaria sp. and Macrosporium sp.) and late (Phytophthora sp.) blights of leaves and had a weaker effect on the soil microflora.

Workplace violence: protecting your practice from an epidemic.

PubMed

Calway, R C

2001-01-01

Workplace violence, in the form of verbal threats and/or intimidation and physical aggression, is commonplace in medical practices today. The practice must be prepared to respond to this disaster in the same manner with which they prepare for responses to a medical emergency, fire, or loss of electricity. The risks and liabilities of failing to build a robust program include low staff morale and productivity, employee injury, lost work time, regulatory fines and sanctions, and the risk of civil judgments against the practice. The most successful programs receive commitment (read: involvement) from management and include staff in program development and implementation.

Incorporating Sulfur Inside the Pores of Carbons for Advanced Lithium-Sulfur Batteries: An Electrolysis Approach.

PubMed

He, Bin; Li, Wen-Cui; Yang, Chao; Wang, Si-Qiong; Lu, An-Hui

2016-01-26

We have developed an electrolysis approach that allows effective and uniform incorporation of sulfur inside the micropores of carbon nanosheets for advanced lithium-sulfur batteries. The sulfur-carbon hybrid can be prepared with a 70 wt % sulfur loading, in which no nonconductive sulfur agglomerations are formed. Because the incorporated sulfur is electrically connected to the carbon matrix in nature, the hybrid cathode shows excellent electrochemical performance, including a high reversible capacity, good rate capability, and good cycling stability, as compared to one prepared using the popular melt-diffusion method.

Microwave-assisted Maillard reactions for the preparation of advanced glycation end products (AGEs).

PubMed

Visentin, Sonja; Medana, Claudio; Barge, Alessandro; Giancotti, Valeria; Cravotto, Giancarlo

2010-05-21

The application of microwaves as an efficient form of volumetric heating to promote organic reactions was recognized in the mid-1980 s. It has a much longer history in the food research and industry where microwave irradiation was studied in depth to optimize food browning and the development of desirable flavours from Maillard reactions. The microwave-promoted Maillard reaction is a challenging synthetic method to generate molecular diversity in a straightforward way. In this paper we present a new rapid and efficient one-pot procedure for the preparation of pentosidine and other AGEs under microwave irradiation.

Development of chemically vapor deposited rhenium emitters of (0001) preferred crystal orientation

NASA Technical Reports Server (NTRS)

Yang, L.; Hudson, R. G.

1973-01-01

Rhenium thermionic emitters were prepared by the pyrolysis of rhenium chlorides formed by the chlorination of rhenium pellets. The impurity contents, microstructures, degrees of (0001) preferred crystal orientation, and vacuum electron work functions of these emitters were determined as a function of deposition parameters, such as substrate temperature, rhenium pellet temperature and chlorine flow rate. A correlation between vacuum electron work function and degree of (0001) preferred crystal orientation was established. Conditions for depositing porosity-free rhenium emitters of high vacuum electron work functions were defined. Finally, three cylindrical rhenium emitters were prepared under the optimum deposition conditions.

Updated Liquid Secondary Waste Grout Formulation and Preliminary Waste Form Qualification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saslow, Sarah A.; Um, Wooyong; Russell, Renee L.

This report describes the results from liquid secondary waste grout (LSWG) formulation and cementitious waste form qualification tests performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). New formulations for preparing a cementitious waste form from a high-sulfate liquid secondary waste stream simulant, developed for Effluent Management Facility (EMF) process condensates merged with low activity waste (LAW) caustic scrubber, and the release of key constituents (e.g. 99Tc and 129I) from these monoliths were evaluated. This work supports a technology development program to address the technology needs for Hanford Site Effluent Treatment Facility (ETF) liquid secondarymore » waste (LSW) solidification and supports future Direct Feed Low-Activity Waste (DFLAW) operations. High-priority activities included simulant development, LSWG formulation, and waste form qualification. The work contained within this report relates to waste form development and testing and does not directly support the 2017 integrated disposal facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY17, and for future waste form development efforts. The provided data should be used by (i) cementitious waste form scientists to further understanding of cementitious dissolution behavior, (ii) IDF PA modelers who use quantified constituent leachability, effective diffusivity, and partitioning coefficients to advance PA modeling efforts, and (iii) the U.S. Department of Energy (DOE) contractors and decision makers as they assess the IDF PA program. The results obtained help fill existing data gaps, support final selection of a LSWG waste form, and improve the technical defensibility of long-term waste form performance estimates.« less

Simultaneous determination of 15 marker constituents in various radix Astragali preparations by solid-phase extraction and high-performance liquid chromatography.

PubMed

Qi, Lian-Wen; Yu, Qing-Tao; Yi, Ling; Ren, Mei-Ting; Wen, Xiao-Dong; Wang, Yu-Xia; Li, Ping

2008-01-01

An improved quality control method was developed to simultaneously determine 15 major constituents (eight flavonoids and seven saponins) in various radix Astragali preparations, using SPE for pretreatment of samples, HPLC with diode-array and evaporative light scattering detectors (DAD-ELSD) for quantification in one run, and HPLC-ESI-TOF/MS for definite identification of compounds in preparations. Optimum separations were obtained with a ZORBAX C(18) column, using a gradient elution with 0.3% aqueous formic acid and ACN. This established method was fully validated with respect to linearity, precision, repeatability, and accuracy, and was successfully applied to quantify the 15 compounds in 19 commercial samples, including 3 dosage forms, i. e., oral solution, injection, concentrated granule, and its processed products of radix Astragali. The results demonstrated that many factors might result in significant differences in quality of the final preparations, including crude drugs, pretreatment processes, manufacturing procedure, storage conditions, etc. Then the developed method provided a reasonable and powerful manner to ensure the efficacy, safety, and batch-to-batch uniformity of radix Astragali products by standardizing each procedure, and thus should be proposed as quality control for the clinical use and modernization of herbal preparations.

Fabrication of hierarchical feather-mimetic polymer nanofibres

NASA Astrophysics Data System (ADS)

Ouyang, Shenshen; Wang, Tao; Zhong, Longgang; Peng, Meiling; Yao, Juming; Wang, Sheng

2018-01-01

In this study, hierarchically feather-mimetic structures formed of poly(m-phenylene isophthalamide) (PMIA) nanofibres were prepared by electrospinning and subsequent crystallisation for superwettability applications. X-ray diffraction measurementsand scanning electron microscopy show that a feather-mimetic structure of crystallised nanoflakes was formed following a hydrothermal treatment process. The nanoflakes formed a nanosized fine texture on top of a coarser-textured membrane, which greatly improved the membrane roughness and yielded a hierarchical topography. After fluorination, the membrane exhibited superamphiphobicity, with surface contact angles of 151° and 136° for water and hexadecane, respectively. The method provides new insight for the design and development of functional bionic membranes based on PMIA.

Polyimides prepared from 3,5-diamino benzo trifluoride

NASA Technical Reports Server (NTRS)

Gerber, Margaret K. (Inventor); Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); St.clair, Anne K. (Inventor)

1993-01-01

High performance, thermooxidatively stable polyimides are prepared by reacting aromatic diamines with pendant trifluoromethyl groups and dianhydrides in an amide solvent to form a poly(amic acid), followed by cyclizing the poly(amic acid) to form the corresponding polyimide.

Fabrication and characterization of poly(L-lactic acid) gels induced by fibrous complex crystallization with solvents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsuda, Yasuhiro; Fukatsu, Akinobu; Wang, Yangyang

2014-01-01

Complex crystal induced gelation of poly(L-lactic acid) (PLLA) solutions was studied for a series of solvents, including N,N-dimethylformamide (DMF). By cooling the solutions prepared at elevated temperatures, PLLA gels were produced in solvents that induced complex crystals ( -crystals) with PLLA. Fibrous structure of PLLA in the gel with DMF was observed by polarizing optical microscopy, field emission electron microscopy, and atomic force microscopy. Upon heating, the crystal form of PLLA in the DMF gel changed from -crystal to a-crystal, the major crystal form in common untreated PLLA films, but the morphology and high elastic modulus of the gel remainedmore » until the a-crystal dissolved at higher temperature. In addition, a solvent exchanging method was developed, which allowed PLLA gels to be prepared in other useful solvents that do not induce -crystals without losing the morphology and mechanical properties.« less

Method of preparing nuclear wastes for tansportation and interim storage

DOEpatents

Bandyopadhyay, Gautam; Galvin, Thomas M.

1984-01-01

Nuclear waste is formed into a substantially water-insoluble solid for temporary storage and transportation by mixing the calcined waste with at least 10 weight percent powdered anhydrous sodium silicate to form a mixture and subjecting the mixture to a high humidity environment for a period of time sufficient to form cementitious bonds by chemical reaction. The method is suitable for preparing an interim waste form from dried high level radioactive wastes.

Method for preparing hydrous zirconium oxide gels and spherules

DOEpatents

Collins, Jack L.

2003-08-05

Methods for preparing hydrous zirconium oxide spherules, hydrous zirconium oxide gels such as gel slabs, films, capillary and electrophoresis gels, zirconium monohydrogen phosphate spherules, hydrous zirconium oxide spherules having suspendable particles homogeneously embedded within to form a composite sorbent, zirconium monohydrogen phosphate spherules having suspendable particles of at least one different sorbent homogeneously embedded within to form a composite sorbent having a desired crystallinity, zirconium oxide spherules having suspendable particles homogeneously embedded within to form a composite, hydrous zirconium oxide fiber materials, zirconium oxide fiber materials, hydrous zirconium oxide fiber materials having suspendable particles homogeneously embedded within to form a composite, zirconium oxide fiber materials having suspendable particles homogeneously embedded within to form a composite and spherules of barium zirconate. The hydrous zirconium oxide spherules and gel forms prepared by the gel-sphere, internal gelation process are useful as inorganic ion exchangers, catalysts, getters and ceramics.

Development of Asymmetric Deacylative Allylation

PubMed Central

Grenning, Alexander J.; Van Allen, Christie K.; Maji, Tapan; Lang, Simon B.

2013-01-01

Herein we present the development of asymmetric deacylative allylation of ketone enolates. The reaction directly couples readily available ketone pronucleophiles with allylic alcohols using facile retro-Claisen cleavage to form reactive intermediates in situ. The simplicity and robustness of the reaction conditions is demonstrated by the preparation of > 6 grams of an allylated tetralone from commercially available materials. Furthermore, use of non-racemic PHOX ligands allows intermolecular formation of quaternary stereocenters directly from allylic alcohols. PMID:23734611

Guide to Competency-Based Education for Business and Office Occupations. A Catalog of Bookkeeping/Accounting, Clerical/Secretarial, and Data Processing Skills Which Your Students Need to Get a Job and to Keep It.

ERIC Educational Resources Information Center

New Mexico State Dept. of Education; Santa Fe. Div. of Vocational Education.

This curriculum guide was developed to help administrators develop a competency-based postsecondary curriculum to prepare students for employment in business and office occupations. The content is in five sections. The first one introduces the concepts and techniques of competency-based education and includes some sample forms, such as student…

Influence of Dosage Form on the Intravitreal Pharmacokinetics of Diclofenac

PubMed Central

Durairaj, Chandrasekar; Kim, Stephen J.; Edelhauser, Henry F.; Shah, Jaymin C.; Kompella, Uday B.

2009-01-01

Purpose To prepare a suspension form of diclofenac and compare the influence of the injected form (suspension versus solution) on the intravitreal pharmacokinetics of diclofenac in Dutch belted pigmented rabbits. Methods Diclofenac acid was prepared and characterized in a suspension formulation. Rabbit eyes were injected with either diclofenac sodium solution (0.3 mg) or diclofenac acid suspension (10 mg) prepared in 0.1 mL balanced salt solution. Rabbits were killed at regular time intervals, the eyes enucleated, and drug content quantified in the vitreous humor and retina-choroid tissue by high-performance liquid chromatography. Pharmacokinetic models were developed for both the dosage forms, and simulations were performed for different doses. Results Diclofenac acid with an approximate 5-μm particle size exhibited 3.5-fold lower solubility in vitreous humor, when compared with its sodium salt. The estimated settling velocity of the suspension in the vitreous humor was 3 cm/h. After diclofenac sodium salt solution injection, drug levels declined rapidly with no drug levels detectable after 24 hours in the vitreous humor and 4 hours in the RC. Throughout the assessed time course, drug levels were higher in the vitreous. However, sustained, high drug levels were observed in both the vitreous humor and the retina-choroid even on day 21 after diclofenac acid suspension injection, with retina-choroid drug levels being higher beginning at 0.25 hour. The elimination half-life of diclofenac suspension was 24 and 18 days in vitreous and retina-choroid, respectively, compared to 2.9 and 0.9 hours observed with diclofenac sodium. The pharmacokinetic models developed indicated a slow-release distribution or depot compartment for the diclofenac acid suspension in the posterior segment. Simulations indicated the inability of a 10-mg dose of diclofenac sodium solution to sustain drug levels in the vitreous beyond 11 days. Conclusions By choosing a less soluble form of a drug such as diclofenac acid, vitreous elimination half-life can be prolonged up to 24 days, potentially resulting in therapeutic levels in the posterior segment tissues for a few months. Higher detectable drug levels in the retina-choroid suggest rapid settling and persistent retention of suspension in retina-choroid tissue. PMID:19516015

[Embryotoxic and teratogenic effect of Pharmachem tetramisole].

PubMed

Stoianov, K; Todorov, S

1982-01-01

Studies were carried out to establish the effect of high rates of Tetramizol Pharmachim on the embryonal and fetal development in rats. The preparation was administered orally to pregnant animals under the form of a 1 per cent solution at the rate of 1/5 LD50 (=200 mg/kg), on the fourth and the thirteenth day of gestation. It was found that the amount of the preparation applied on the fourth day after conception took place led to rise of the preimplantation loss of embryos. The rate of the total embryonal mortality also rose. Accordingly, it was concluded that in high doses Tetramizol Pharmachim could produce an embryotoxic effect on rats. The application of the preparation later during pregnacy (the 13th day) did not have an adverse effect on the normal course of gestation. No abnormal effects were demonstrated on the growth and development of fetuses during all stages of investigation, which might point to the teratogenic action of Tetramizol.

Influence of poly (lactide-co-glycolide) type and gamma irradiation on the betamethasone acetate release from the in situ forming systems.

PubMed

Rafienia, Mohammad; Emami, Shahriar Hojjati; Mirzadeh, Hamid; Mobedi, Hamid; Karbasi, Saeed

2009-04-01

In situ forming biodegradable polymeric systems were prepared from Poly (DL-lactide-co-glycolide), RG504H (50:50, lactide:glycolide), RG756 (75:25) and mixture of them. They were dissolved in N-methyl-2-pyrrolidone (33% w/w) and mixed with betamethasone acetate (BTMA, 5 and 10% w/w) and ethyl heptanoate (5% w/w, as an additive). The effects of gamma irradiation, drug loading, type of polymers and solvent removal were evaluated on release profiles. Scanning electron microscopy (SEM) of RG756 samples loaded by BTMA did not show any degradation until two weeks. Differential scanning calorimeter (DSC) experiments confirmed insignificant decrease in T(g), and consequently release rate. Declining T(g) of RG504H and RG756 after gamma irradiation was about 0.4 and 1.46 degrees C, respectively. High performance liquid chromatography (HPLC) revealed that BTMA release is more rapid from the formulations prepared using the RG504H with lower molecular weight. The formulations prepared by RG756 had lower burst release (2.5-41%) than the samples based on RG504H (60-67%) and mixture of them (30-33%). Regarding this research three different kinds of steriled in situ forming systems were developed which can release BTMA for 24, 90 and 60 days.

Encapsulation of eugenol from clove oil using casein micelle for solid preparation

NASA Astrophysics Data System (ADS)

Wijayanto, Andri; Putri, Yeshinta Risky Priasmara; Hermansyah, Heri; Sahlan, Muhamad

2017-02-01

Liquid preparation of eugenol in clove oil form is one of eugenol preparation form that is easiest to get it nowadays in many level of purity. The problem is the liquid preparation of chemical is often not easy to handle than the solid one. In this study, we observe the effectivity of cow milk casein in case of encapsulating eugenol from clove oil for creating the solid preparation of eugenol in nanoscale size. The result is 63.86% eugenol from clove oil can be encapsulated by the casein. The average particle diameter is about 377.5 nm, with loading capacity until 67.2%.

Laser rapid forming technology of high-performance dense metal components with complex structure

NASA Astrophysics Data System (ADS)

Huang, Weidong; Chen, Jing; Li, Yanming; Lin, Xin

2005-01-01

Laser rapid forming (LRF) is a new and advanced manufacturing technology that has been developed on the basis of combining high power laser cladding technology with rapid prototyping (RP) to realize net shape forming of high performance dense metal components without dies. Recently we have developed a set of LRF equipment. LRF experiments were carried out on the equipment to investigate the influences of processing parameters on forming characterizations systematically with the cladding powder materials as titanium alloys, superalloys, stainless steel, and copper alloys. The microstructure of laser formed components is made up of columnar grains or columnar dendrites which grow epitaxially from the substrate since the solid components were prepared layer by layer additionally. The result of mechanical testing proved that the mechanical properties of laser formed samples are similar to or even over that of forging and much better than that of casting. It is shown in this paper that LRF technology is providing a new solution for some difficult processing problems in the high tech field of aviation, spaceflight and automobile industries.

Effect of sample preparation method on quantification of polymorphs using PXRD.

PubMed

Alam, Shahnwaz; Patel, Sarsvatkumar; Bansal, Arvind Kumar

2010-01-01

The purpose of this study was to improve the sensitivity and accuracy of quantitative analysis of polymorphic mixtures. Various techniques such as hand grinding and mixing (in mortar and pestle), air jet milling and ball milling for micronization of particle and mixing were used to prepare binary mixtures. Using these techniques, mixtures of form I and form II of clopidogrel bisulphate were prepared in various proportions from 0-5% w/w of form I in form II and subjected to x-ray powder diffraction analysis. In order to obtain good resolution in minimum time, step time and step size were varied to optimize scan rate. Among the six combinations, step size of 0.05 degrees with step time of 5 s demonstrated identification of maximum characteristic peaks of form I in form II. Data obtained from samples prepared using both grinding and mixing in ball mill showed good analytical sensitivity and accuracy compared to other methods. Powder x-ray diffraction method was reproducible, precise with LOD of 0.29% and LOQ of 0.91%. Validation results showed excellent correlation between actual and predicted concentration with R2 > 0.9999.

Stability of oseltamivir in various extemporaneous liquid preparations.

PubMed

Ford, Stephen M; Kloesel, Lawson G; Grabenstein, John D

2007-01-01

The purpose of this study was to determine the stability of oseltamivir, the active ingredient in Tamiflu, in contemporaneously compounded suspensions for a period of not less than 90 days. The suspension vehicles provided for the study were chosen because of ease of preparation, commercial availability, and palatability. Stability of the active ingredient was demonstrated for suspensions prepared in PCCA-Plus, PCCA Acacia, and 1% methylcellulose and was independent of storage temperature (tested temperatures were 2 deg C to 8 deg C and 25 deg C). A control sample of the commercial liquid form of Tamiflu was prepared, stored and analyzed along with the samples prepared from the contents of capsules. There was no difference in the apparent stability of the two forms of the drug preparation.

FY16 Annual Accomplishments - Waste Form Development and Performance: Evaluation Of Ceramic Waste Forms - Comparison Of Hot Isostatic Pressed And Melt Processed Fabrication Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amoroso, J.; Dandeneau, C.

FY16 efforts were focused on direct comparison of multi-phase ceramic waste forms produced via melt processing and HIP methods. Based on promising waste form compositions previously devised at SRNL, simulant material was prepared at SRNL and a portion was sent to the Australian Nuclear Science and Technology Organization (ANSTO) for HIP treatments, while the remainder of the material was melt processed at SRNL. The microstructure, phase formation, elemental speciation, and leach behavior, and radiation stability of the fabricated ceramics was performed. In addition, melt-processed ceramics designed with different fractions of hollandite, zirconolite, perovskite, and pyrochlore phases were investigated. for performancemore » and properties.« less

Catalytic Oxidation by Transition Metal Ions in Zeolites.

DTIC Science & Technology

1984-09-28

exotic schemes were developed. It was previously demonstrated that MoCI5 may be reacted with a HYu (here Yu denotes a steam-stabilized or...34ultrastable" zeolite) to form a MoYu zeolite and HC1 which is removed from the system.1 In this study, MoYu zeolites have been prepared by reacting HYu with Mo

Laying Tracks to Graduation: The First Year of Implementing Diplomas Now

ERIC Educational Resources Information Center

Corrin, William; Sepanik, Susan; Gray, Aracelis; Fernandez, Felix; Briggs, Ashley; Wang, Kathleen K.

2014-01-01

Too many students in high-poverty, urban communities drop out of high school, and too few graduate prepared for college and careers. Three national organizations--Talent Development Secondary, City Year, and Communities In Schools--have formed Diplomas Now in an effort to transform urban secondary schools so fewer students drop out and more…

Moving down the Track: Changing School Practices during the Second Year of "Diplomas Now"

ERIC Educational Resources Information Center

Sepanik, Susan; Corrin, William; Roy, David; Gray, Aracelis; Fernandez, Felix; Briggs, Ashley; Wang, Kathleen K.

2015-01-01

Too many students in high-poverty, urban communities drop out of high school, and too few graduate prepared for college and careers. Three national organizations--Talent Development Secondary, City Year, and Communities In Schools--have formed "Diplomas Now" in an effort to transform urban secondary schools so fewer students drop out and…

Changes and Trends in Secondary Agricultural Education in the Czech Republic

ERIC Educational Resources Information Center

Slavik, Milan

2004-01-01

Programmes of education for farmers in the form of Winter Schools, in the early 19th century, were gradually broadened into agricultural education for employment in farming or as preparation for higher education. In the 20th century, vocational education was developed at Apprenticeship and Secondary Schools to meet the needs of large-scale state…

Make It Your Business. A Corporate Fundraising Guide for Literacy Programs.

ERIC Educational Resources Information Center

BCEL Bulletin, 1989

1989-01-01

This guide is intended to help local, state, and national literacy program staff in their attempts to develop corporate funding for their activities. Part I discusses the role of direct corporate giving in the national philanthropic context, as well as patterns and forms of corporate giving. Part II gives guidelines on how to prepare for and…

Information Communication Technology in the Form of an Expert System Shell as a Cognitive Tool to Facilitate Higher-Order Thinking

ERIC Educational Resources Information Center

Collins, Gary W.; Knoetze, Johan G.

2014-01-01

Information communication technology is capable of contributing supplementary teaching and learning strategies that can be used to address various educational challenges faced by higher education. Students who enter South African higher education institutions are often academically under-prepared and have not developed the cognitive skills…

Sonnets, High Tech, Haiku: Teaching Poetry in the CAI Classroom.

ERIC Educational Resources Information Center

Krebs, Cynthia; Nichols, Chloe

This report emphasizes the techniques required today for effective slide construction and contains suggestions about the nuts and bolts of slide preparation. Two instructors developed a presentation at Utah Valley State College to enhance their teaching of the sonnet and the Japanese haiku. Their premise: since poetry is a highly visual art form,…

Teaching Win-Win Better Prepares Students for Subsequent Experiences in Life.

ERIC Educational Resources Information Center

Brainard, Alan J.

The psychology of competition and winning, especially in relation to learning and motivation, is discussed. The Personalized System of Instruction (PSI) approach to coursework is proposed as a means of using the winning philosophy in education. Also suggested is the inclusion into coursework design of a form of rhetoric developed by Carl Rogers…

Playgrounds of the Nation: A Series of Projects on Outdoor Recreation and the Conservation of Forest Life Developed through a Study of State Parks and Forests for Elementary Schools. Bulletin, 1927, No. 20

ERIC Educational Resources Information Center

Fox, Florence C.

1927-01-01

Recreational areas in the form of State parks and forests bear a close relationship to the welfare of the boys and girls of America. This bulletin is in accord with the plan of the bureau to offer, from time to time, to the elementary schools of the country certain subjects of study in the form of new materials of instructions so prepared that…

Low density, microcellular foams, preparation, and articles

DOEpatents

Young, A.T.

1982-03-03

A microcellular low-density foam of poly(4-methyl-1-pentene) particularly useful for forming targets for inertial confinement fusion has been developed. Articles made from the foam have been machined to tolerances of 0.0001 inch, although the densities of the fragile foam are low (about 10 to about 100 mg/cc) and the cell sizes are small (about 10 to about 30 ..mu..m). Methods for forming the foam and articles are given. The yield strength of the foam of the invention is higher than was obtained in other structures of this same material.

Preparation of thin ceramic films via an aqueous solution route

DOEpatents

Pederson, Larry R.; Chick, Lawrence A.; Exarhos, Gregory J.

1989-01-01

A new chemical method of forming thin ceramic films has been developed. An aqueous solution of metal nitrates or other soluble metal salts and a low molecular weight amino acid is coated onto a substrate and pyrolyzed. The amino acid serves to prevent precipitation of individual solution components, forming a very viscous, glass-like material as excess water is evaporated. Using metal nitrates and glycine, the method has been demonstrated for zirconia with various levels of yttria stabilization, for lanthanum-strontium chromites, and for yttrium-barium-copper oxide superconductors on various substrates.

Preparation of fine powdered composite for latent heat storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fořt, Jan, E-mail: jan.fort.1@fsv.cvut.cz; Trník, Anton, E-mail: anton.trnik@fsv.cvut.cz; Pavlíková, Milena, E-mail: milena.pavlikova@fsv.cvut.cz

Application of latent heat storage building envelope systems using phase-change materials represents an attractive method of storing thermal energy and has the advantages of high-energy storage density and the isothermal nature of the storage process. This study deals with a preparation of a new type of powdered phase change composite material for thermal energy storage. The idea of a composite is based upon the impregnation of a natural silicate material by a reasonably priced commercially produced pure phase change material and forming the homogenous composite powdered structure. For the preparation of the composite, vacuum impregnation method is used. The particlemore » size distribution accessed by the laser diffraction apparatus proves that incorporation of the organic phase change material into the structure of inorganic siliceous pozzolana does not lead to the clustering of the particles. The compatibility of the prepared composite is characterized by the Fourier transformation infrared analysis (FTIR). Performed DSC analysis shows potential of the developed composite for thermal energy storage that can be easily incorporated into the cement-based matrix of building materials. Based on the obtained results, application of the developed phase change composite can be considered with a great promise.« less

Orodispersible films in individualized pharmacotherapy: The development of a formulation for pharmacy preparations.

PubMed

Visser, J Carolina; Woerdenbag, Herman J; Crediet, Stefan; Gerrits, Edwin; Lesschen, Marjan A; Hinrichs, Wouter L J; Breitkreutz, Jörg; Frijlink, Henderik W

2015-01-15

Orodispersible films (ODFs) are promising drug delivery systems for customized small scale pharmacy preparations. The aim of the present study was to develop a versatile casting solution suitable for the extemporaneous production of ODFs to which active pharmaceutical ingredients (APIs) can be added. Different combinations of film forming agents and other excipients and different casting heights were tested for their suitability for production of ODFs. The best suitable casting solution contained hypromellose, carbomer, glycerol, disodium EDTA and trometamol. This casting solution was used to prepare ODFs containing water-soluble APIs (enalapril maleate and prednisolone disodium phosphate) and a poorly water-soluble API (diazepam) for which ethanol 96% was used as co-solvent.The water-soluble APIs as well as ethanol influenced the viscosity of the casting solution, mechanical properties and disintegration time of the ODFs. All ODFs containing API met the requirements on uniformity of mass and uniformity of content set by the European Pharmacopoeia (2014) (Ph. Eur.) 8th edition. In conclusion, ODFs of good pharmaceutical quality can be prepared on small scale. Hereby opening the perspective of using ODFs for individualized pharmacotherapy. Copyright © 2014 Elsevier B.V. All rights reserved.

M3FT-17OR0301070211 - Preparation of Hot Isostatically Pressed AgZ Waste Form Samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jubin, Robert Thomas; Bruffey, Stephanie H.; Jordan, Jacob A.

The production of radioactive iodine-bearing waste forms that exhibit long-term stability and are suitable for permanent geologic disposal has been the subject of substantial research interest. One potential method of iodine waste form production is hot isostatic pressing (HIP). Recent studies at Oak Ridge National Laboratory (ORNL) have investigated the conversion of iodine-loaded silver mordenite (I-AgZ) directly to a waste form by HIP. ORNL has performed HIP with a variety of sample compositions and pressing conditions. The base mineral has varied among AgZ (in pure and engineered forms), silver-exchanged faujasite, and silverexchanged zeolite A. Two iodine loading methods, occlusion andmore » chemisorption, have been explored. Additionally, the effects of variations in temperature and pressure of the process have been examined, with temperature ranges of 525°C–1,100°C and pressure ranges of 100–300 MPa. All of these samples remain available to collaborators upon request. The sample preparation detailed in this document is an extension of that work. In addition to previously prepared samples, this report documents the preparation of additional samples to support stability testing. These samples include chemisorbed I-AgZ and pure AgI. Following sample preparation, each sample was processed by HIP by American Isostatic Presses Inc. and returned to ORNL for storage. ORNL will store the samples until they are requested by collaborators for durability testing. The sample set reported here will support waste form durability testing across the national laboratories and will provide insight into the effects of varied iodine content on iodine retention by the produced waste form and on potential improvements in waste form durability provided by the zeolite matrix.« less

[Formulation and special investigations of innovative intraoral solid dosage forms.

PubMed

Kristo, K; kATONA, B; Piukovics, P; Olah, I; Sipos, B; Sipos, S E; Sovany, T; Hodi, K; Ifi Regdon, G

During our work, we summarized the types of solid dosage forms which were in the focus of attention in the last years because of their innovative pharmaceutical technology solution and simple use. The biopharmaceutics of solid dosage forms for intraoral use and the advantages of the use of these dosages forms were presented in general. However, these dosage forms cannot always be prepared with conventional pharmaceutical processes, therefore the special pharmaceutical solutions which can be applied for their preparation were presented. In addition to testing the European Pharmacopoeia dosage forms, the special tests which can be applied for the characterization of innovative solid dosage forms were highlighted.

Rising against a gathering storm: a biopolitical analysis of citizenship in STEM policy

NASA Astrophysics Data System (ADS)

Hoeg, Darren; Bencze, Larry

2017-12-01

Science, technology, engineering and mathematics (STEM) is a form of education seen by many governments and educators as a preparation of the types of students needed for the future. STEM education is being developed in many countries without the support of official policy, such as is the case in Canada. In the United States, the National Science Foundation (NSF), and a private non-profit organisation, Achieve Inc.™, have been enlisted to develop policy to guide the development on STEM nationally. Due to its influence in global politics and economy, many countries, including Canada, are interested in how the United States is preparing its citizens for the future through STEM education. In this paper we present a critical discourse analysis on STEM policy from the United States as a basis to discuss: biopolitics in science education; notions of citizenship in contemporary school education and science education; and citizenship and STEM education.

PKK-man: A System to Manage PKK Activities in Indonesia

NASA Astrophysics Data System (ADS)

Anggraini, R. N. E.; Rochimah, S.; Soedjono, A. R.

2016-01-01

PKK community is a well-known women community in Indonesia. PKK was formed from national level to neighbourhood association level and usually has a regular event and several activities. This is the reason why PKK is expected to play an active role in national development, started from PKK member family. This research intends to develop a system to manage PKK activities and prepares information sharing in PKK community. The application was built using client server architecture. The web version of PKK-man was developed using PHP framework and was prepared to be accessed by PKK board member. Since they will deal with more data so a wide interface in web version will be more suitable. While the ordinary PKK member can access PKK-man through mobile application. The mobile version was built using PhoneGap framework that supports different mobile operating systems.

Errors in preparation and administration of parenteral drugs in neonatology: evaluation and corrective actions.

PubMed

Hasni, Nesrine; Ben Hamida, Emira; Ben Jeddou, Khouloud; Ben Hamida, Sarra; Ayadi, Imene; Ouahchi, Zeineb; Marrakchi, Zahra

2016-12-01

The medication iatrogenic risk is quite unevaluated in neonatology Objective: Assessment of errors that occurred during the preparation and administration of injectable medicines in a neonatal unit in order to implement corrective actions to reduce the occurrence of these errors. A prospective, observational study was performed in a neonatal unit over a period of one month. The practice of preparing and administering injectable medications were identified through a standardized data collection form. These practices were compared with summaries of the characteristics of each product (RCP) and the bibliography. One hundred preparations were observed of 13 different drugs. 85 errors during preparations and administration steps were detected. These errors were divided into preparation errors in 59% of cases such as changing the dilution protocol (32%), the use of bad solvent (11%) and administration errors in 41% of cases as errors timing of administration (18%) or omission of administration (9%). This study showed a high rate of errors during stages of preparation and administration of injectable drugs. In order to optimize the care of newborns and reduce the risk of medication errors, corrective actions have been implemented through the establishment of a quality assurance system which consisted of the development of injectable drugs preparation procedures, the introduction of a labeling system and staff training.

Best Practice No 177

PubMed Central

Galloway, M J

2004-01-01

This guideline reviews the introduction and development of business planning in the National Health Service. A guideline for writing a business case for service development that would form part of a pathology business plan has been developed. This guideline outlines six steps that are required in the preparation of a business case. The format of the guideline has been developed largely from other national guidelines that have been published for the development of capital projects. In view of the publication of these guidelines, the scope of this guideline excludes business cases for information, management, and technology projects and large capital projects. PMID:15047731

Impacts of talent development environments on athlete burnout: a self-determination perspective.

PubMed

Li, Chunxiao; Wang, Chee Keng John; Pyun, Do Young

2017-09-01

Guided by Deci and Ryan's (2000) self-determination theory, this survey study aimed to examine the effects of the talent development environmental factors on athlete burnout. Talented adolescent athletes (n = 691) filled out a survey form measuring the talent development environmental factors, needs satisfaction and burnout. The findings showed that three talent environmental factors (i.e., long-term development focus, holistic quality preparation and communication) were negative predictors of burnout via needs satisfaction. It was concluded that the three talent development environmental factors may be important for facilitating athletes' needs satisfaction and preventing burnout.

Kinetics of Nucleation and Crystal Growth in Glass Forming Melts in Microgravity

NASA Technical Reports Server (NTRS)

Day, Delbert E.; Ray, Chandra S.

1999-01-01

The following list summarizes the most important results that have been consistently reported for glass forming melts in microgravity: (1) Glass formation is enhanced for melts prepared in space; (2) Glasses prepared in microgravity are more chemically homogeneous and contain fewer and smaller chemically heterogeneous regions than identical glasses prepared on earth; (3) Heterogeneities that are deliberately introduced such as Pt particles are more uniformly distributed in a glass melted in space than in a glass melted on earth; (4) Glasses prepared in microgravity are more resistant to crystallization and have a higher mechanical strength and threshold energy for radiation damage; and (5) Glasses crystallized in space have a different microstructure, finer grains more uniformly distributed, than equivalent samples crystallized on earth. The preceding results are not only scientifically interesting, but they have considerable practical implications. These results suggest that the microgravity environment is advantageous for developing new and improved glasses and glass-ceramics that are difficult to prepare on earth. However, there is no suitable explanation at this time for why a glass melted in microgravity will be more chemically homogeneous and more resistant to crystallization than a glass melted on earth. A fundamental investigation of melt homogenization, nucleation, and crystal growth processes in glass forming melts in microgravity is important to understanding these consistently observed, but yet unexplained results. This is the objective of the present research. A lithium disilicate (Li2O.2SiO2) glass will be used for this investigation, since it is a well studied system, and the relevant thermodynamic and kinetic parameters for nucleation and crystal growth at 1-g are available. The results from this research are expected to improve our present understanding of the fundamental mechanism of nucleation and crystal growth in melts and liquids, and to lead improvements in glass processing technology on earth, with the potential for creating new high performance glasses and glass-ceramics.

Effects of consumer food preparation on acrylamide formation.

PubMed

Jackson, Lauren S; Al-Taher, Fadwa

2005-01-01

Acrylamide is formed in high-carbohydrate foods during high temperature processes such as frying, baking, roasting and extrusion. Although acrylamide is known to form during industrial processing of food, high levels of the chemical have been found in home-cooked foods, mainly potato- and grain-based products. This chapter will focus on the effects of cooking conditions (e.g. time/temperature) on acrylamide formation in consumer-prepared foods, the use of surface color (browning) as an indicator of acrylamide levels in some foods, and methods for reducing acrylamide levels in home-prepared foods. As with commercially processed foods, acrylamide levels in home-prepared foods tend to increase with cooking time and temperature. In experiments conducted at the NCFST, we found that acrylamide levels in cooked food depended greatly on the cooking conditions and the degree of "doneness", as measured by the level of surface browning. For example, French fries fried at 150-190 degrees C for up to 10 min had acrylamide levels of 55 to 2130 microg/kg (wet weight), with the highest levels in the most processed (highest frying times/temperatures) and the most highly browned fries. Similarly, more acrylamide was formed in "dark" toasted bread slices (43.7-610.7 microg/kg wet weight), than "light" (8.27-217.5 microg/kg) or "medium" (10.9-213.7 microg/kg) toasted slices. Analysis of the surface color by colorimetry indicated that some components of surface color ("a" and "L" values) correlated highly with acrylamide levels. This indicates that the degree of surface browning could be used as an indicator of acrylamide formation during cooking. Soaking raw potato slices in water before frying was effective at reducing acrylamide levels in French fries. Additional studies are needed to develop practical methods for reducing acrylamide formation in home-prepared foods without changing the acceptability of these foods.

Selective spectrofluorimetric method for determination of Lisinopril in pharmaceutical preparations and in presence of hydrochlorothiazide: Application to content uniformity testing.

PubMed

Derayea, Sayed M; Badr El-Din, Khalid M; Mohammed, Fatma F

2017-12-01

A novel sensitive and cost-effective spectrofluorimetric method has been developed and validated for determination of lisinopril (an angiotensin converting enzyme inhibitor) in its pure form and pharmaceutical preparations. The method is based on the reaction of the drug with ninhydrin and phenylacetaldehyde in buffered medium (pH 7.0) to form a highly fluorescent product measured at 460 nm after excitation at 390 nm. Different experimental parameters were optimized and calibration curve was constructed. The fluorescence-concentration relationship was linear in the range of 0.15-4.0 μg mL -1 . The calculated Limit of detection (LOD) and Limit of quantitation (LOQ) were 0.04 and 0.12 μg mL -1 , respectively. The method was successfully applied for the analysis of pharmaceutical preparations containing the studied drug either alone or co-formulated with hydrochlorothiazide. The obtained results were in agreement with those of the reported method in respect to accuracy and precession. Moreover, the method was applied content uniformity testing according to United States Pharmacopeia (USP) guidelines. Copyright © 2017 John Wiley & Sons, Ltd.

Chemical Ligation of Folded Recombinant Proteins: Segmental Isotopic Labeling of Domains for NMR Studies

NASA Astrophysics Data System (ADS)

Xu, Rong; Ayers, Brenda; Cowburn, David; Muir, Tom W.

1999-01-01

A convenient in vitro chemical ligation strategy has been developed that allows folded recombinant proteins to be joined together. This strategy permits segmental, selective isotopic labeling of the product. The src homology type 3 and 2 domains (SH3 and SH2) of Abelson protein tyrosine kinase, which constitute the regulatory apparatus of the protein, were individually prepared in reactive forms that can be ligated together under normal protein-folding conditions to form a normal peptide bond at the ligation junction. This strategy was used to prepare NMR sample quantities of the Abelson protein tyrosine kinase-SH(32) domain pair, in which only one of the domains was labeled with 15N Mass spectrometry and NMR analyses were used to confirm the structure of the ligated protein, which was also shown to have appropriate ligand-binding properties. The ability to prepare recombinant proteins with selectively labeled segments having a single-site mutation, by using a combination of expression of fusion proteins and chemical ligation in vitro, will increase the size limits for protein structural determination in solution with NMR methods. In vitro chemical ligation of expressed protein domains will also provide a combinatorial approach to the synthesis of linked protein domains.

Improvement of Intestinal Absorption of Forsythoside A and Chlorogenic Acid by Different Carboxymethyl Chitosan and Chito-oligosaccharide, Application to Flos Lonicerae - Fructus Forsythiae Herb Couple Preparations

PubMed Central

Zhou, Wei; Wang, Haidan; Zhu, Xuanxuan; Shan, Jinjun; Yin, Ailing; Cai, Baochang; Di, Liuqing

2013-01-01

The current study aims to investigate the effect of chitosan derivatives on the intestinal absorption and bioavailabilities of forsythoside A (FTA) and Chlorogenic acid (CHA), the major active components in Flos Lonicerae - Fructus Forsythiae herb couple. Biopharmaceutics and pharmacokinetics properties of the two compounds have been characterized in vitro, in situ as well as in rats. Based on the identified biopharmaceutics characteristics of the two compounds, the effect of chitosan derivatives as an absorption enhancer on the intestinal absorption and pharmacokinetics of FTA and CHA in pure compound form as well as extract form were investigated in vitro, in situ and in vivo. Both FTA and CHA demonstrated very limited intestinal permeabilities, leading to oral bioavailabilities being only 0.50% and 0.13% in rats, respectively. Results from both in vitro, in situ as well as in vivo studies consistently indicated that Chito-oligosaccharide (COS) at dosage of 25 mg/kg could enhance intestinal permeabilities significantly as well as the in vivo bioavailabilities of both FTA and CHA than CMCs in Flos Lonicerae - Fructus Forsythiae herb couple preparations, and was safe for gastrointestine from morphological observation. Besides, treatment with Flos Lonicerae - Fructus Forsythiae herb couple preparations with COS at the dosage of 25 mg/kg prevented MDCK damage after influenza virus propagation, which was significantly better than control. The current findings not only identified the usefulness of COS for the improved delivery of Flos Lonicerae - Fructus Forsythiae preparations but also demonstrated the importance of biopharmaceutical characterization in the dosage form development of traditional Chinese medicine. PMID:23675483

Tailoring the mucoadhesive and sustained release characteristics of mesalamine loaded formulations for local treatment of distal forms of ulcerative colitis.

PubMed

Ali, Hany S M; Hanafy, Ahmed F; El Achy, Samar N

2016-10-10

Direct delivery of sustained therapeutic levels of mesalamine (MS) via rectal systems to manage distal forms of ulcerative colitis was studied. The High molecular weight hydroxypropyl methylcellulose (HPMC K4M) polymer was combined with hydrophilic surfactants to control polymer hydration process allowing optimization of the mucoadhesive and controlled drug release properties for the rectal systems. Physical mixtures and granules of MS and HPMC K4M were prepared and in vitro characterized using scanning electron microscope, differential scanning calorimetry and X-ray diffraction techniques. Rectal formulations were prepared utilizing MS-HPMC K4M mixtures in different polyethylene glycol (PEG) combination bases. The developed rectal formulations were investigated for physical, mucoadhesion, in-vitro drug release and swelling characteristics. Results revealed acceptable physical characteristics of the prepared formulations with good content uniformity and minimum weight variation. Sustained release patterns of MS form HPMC K4M based formulations were observed. Formulations prepared using high proportions of the polymer or PEG 400 showed higher extent of mucoadhesion, swelling and greatly extended drug release time. Efficacy of an optimized formulation was assessed using the acetic acid induced colitis model in rats and compared to a reference polymer-free formulation of the drug. Clinical evaluation included bleeding from rectum, consistency of animal stool and colon/body weight ratio. Furthermore, histopathological analysis was carried out to evaluate the degree of inflammation and mucosal damage. Overall results showed a significant enhancement in the clinical pictures and colon histopathology of animals treated by the sustained release mucoadhesive formulation compared to the reference polymer free formulation and the non-treated colitis group. Copyright © 2016 Elsevier B.V. All rights reserved.

Metal phthalocyanine intermediates for the preparation of polymers

NASA Technical Reports Server (NTRS)

Achar, B. N.; Fohlen, G. M.; Parker, J. A.

1985-01-01

Metal 4, 4', 4"",-tetracarboxylic phthalocyanines (MPTC) are prepared by reaction of trimellitic anhydride, a salt or hydroxide of the desired metal (or the metal in powdered form), urea and a catalyst. A purer form of MPTC is prepared than heretofore. These tetracarboxylic acids are then polymerized by heat to sheet polymers which have superior heat and oxidation resistance. The metal is preferably a divalent metal having an atomic radius close to 1.35A.

Comprehensive and Development of Communication Aids as Aids to the Education of the Non-Vocal Severely Handicapped. Final Report. September 1, 1974 to March 1, 1976.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Trace Center.

The report details the results of a research and development program on communication aids for the education of the non-vocal severely handicapped. Much of the information in the report was prepared so that it could stand alone, and is in the form of individual papers, reports, and a sourcebook. The documents are divided into three sections: (1)…

Development of Advanced Technologies for Complete Genomic and Proteomic Characterization of Quantized Human Tumor Cells

DTIC Science & Technology

2013-07-01

AVAILABILITY STATEMENT Approved for Public Release; Distribution Unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT With the establishment of GBM cell lines...and quantized cell populations form these GBM patients tumor samples we are able to complete some of our aims of our project. We will continue to...collect tumor samples with consent from families of GBM patients in preparation to perform the molecular analysis of these. Our efforts in the development

Education 2005: The Role of Research and Development in an Overwhelming Campaign for Education in America. Prepared for the Subcommittee on Select Education of the Committee on Education and Labor. House of Representatives, One Hundred Second Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

Arguing that research, development, and dissemination are the least expensive, least threatening, and most needed forms of assistance that the Federal Government can provide to educators working toward the National Education Goals, this committee report presents 21 recommendations designed to enable the Office of Educational Research and…

18 CFR 367.9090 - Account 909, Informational and instructional advertising expenses.

Code of Federal Regulations, 2013 CFR

2013-04-01

... protect health and safety, to encourage environmental protection, to utilize their equipment safely and..., billboards, and other similar forms of advertisement, and preparing and conducting informational motion... forms of advertisement, used in direct mailings. (4) Preparing informational window and other displays...

18 CFR 367.9090 - Account 909, Informational and instructional advertising expenses.

Code of Federal Regulations, 2014 CFR

2014-04-01

... protect health and safety, to encourage environmental protection, to utilize their equipment safely and..., billboards, and other similar forms of advertisement, and preparing and conducting informational motion... forms of advertisement, used in direct mailings. (4) Preparing informational window and other displays...

18 CFR 367.9090 - Account 909, Informational and instructional advertising expenses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... protect health and safety, to encourage environmental protection, to utilize their equipment safely and..., billboards, and other similar forms of advertisement, and preparing and conducting informational motion... forms of advertisement, used in direct mailings. (4) Preparing informational window and other displays...

18 CFR 367.9090 - Account 909, Informational and instructional advertising expenses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... protect health and safety, to encourage environmental protection, to utilize their equipment safely and..., billboards, and other similar forms of advertisement, and preparing and conducting informational motion... forms of advertisement, used in direct mailings. (4) Preparing informational window and other displays...

48 CFR 1845.7102 - Instructions for preparing DD Form 1419.

Code of Federal Regulations, 2010 CFR

2010-10-01

... AND SPACE ADMINISTRATION CONTRACT MANAGEMENT GOVERNMENT PROPERTY Forms Preparation 1845.7102... item requested. Block 3. Enter the manufacturer's model style, or catalog number assigned to the equipment being requisitioned. Always use the model number, if available. The style number is the next...

[A comparative evaluation of the biological action of allergens and allergoids prepared from plant pollen by the double radial immunodiffusion method].

PubMed

Lavrenchik, E I; Korytina, O L

1989-09-01

Antisera to allergens and allergoids prepared from timothy, orchard grass, birch and wormwood pollen have been obtained and used in the double radial immunodiffusion test. The preparations of the allergoid row have been found capable of inducing immune response in laboratory animals (rabbits). Both forms of pollen preparations, allergens and allergoids, have been shown to possess common antigenic determinants reacting with antibodies present in antisera to allergens and allergoids. The absence of identity in the ratio of manifestations of gel precipitation reactions for allergoid with respect to the initial forms of allergens of individual pollen preparation has been noted.

Method of preparing thermal insulation for high temperature microwave sintering operations

DOEpatents

Holcombe, Cressie E.; Dykes, Norman L.; Morrow, Marvin S.

1996-01-01

Superior microwave transparent thermal insulations for high temperature microwave sintering operations were prepared. One embodiment of the thermal insulation comprises granules of boron nitride coated with a very thin layer of glassy carbon made by preparing a glassy carbon precursor and blending it with boron nitride powder to form a mixture. The blended mixture is granulated to form a grit which is dried and heated to form the granules of boron nitride coated with a glassy carbon. Alternatively, grains of glassy carbon are coated with boron nitride by blending a mixture of a slurry comprising boron nitride, boric acid binder, and methyl alcohol with glassy carbon grains to form a blended mixture. The blended mixture is dried to form grains of glassy carbon coated with boron nitride. In addition, a physical mixture of boron nitride powder and glassy carbon grains has also been shown to be an excellent thermal insulation material for microwave processing and sintering.

Hospital preparedness for Ebola virus disease: a training course in the Philippines

PubMed Central

Carlos, Celia; Capistrano, Rowena; Tobora, Charissa Fay; delos Reyes, Mari Rose; Lupisan, Socorro; Corpuz, Aura; Aumentado, Charito; Suy, Lyndon Lee; Hall, Julie; Donald, Julian; Counahan, Megan; Curless, Melanie S; Rhymer, Wendy; Gavin, Melanie; Lynch, Chelsea; Black, Meredith A; Anduyon, Albert D; Buttner, Petra

2015-01-01

Objective To develop, teach and evaluate a training workshop that could rapidly prepare large numbers of health professionals working in hospitals in the Philippines to detect and safely manage Ebola virus disease (EVD). The strategy was to train teams (each usually with five members) of key health professionals from public, private and local government hospitals across the Philippines who could then guide Ebola preparedness in their hospitals. Methods The workshop was developed collaboratively by the Philippine Department of Health and the country office of the World Health Organization. It was evaluated using a pre- and post-workshop test and two evaluation forms. χ2 tests and linear regression analyses were conducted comparing pre- and post-workshop test results. Results A three-day workshop was developed and used to train 364 doctors, nurses and medical technologists from 78 hospitals across the Philippines in three initial batches. Knowledge about EVD increased significantly (P < 0.009) although knowledge on transmission remained suboptimal. Confidence in managing EVD increased significantly (P = 0.018) with 96% of participants feeling more prepared to safely manage EVD cases. Discussion: The three-day workshop to prepare hospital staff for EVD was effective at increasing the level of knowledge about EVD and the level of confidence in managing EVD safely. This workshop could be adapted for use as baseline training in EVD in other developing countries to prepare large numbers of hospital staff to rapidly detect, isolate and safely manage EVD cases. PMID:25960920

Development of aprepitant loaded orally disintegrating films for enhanced pharmacokinetic performance.

PubMed

Sharma, Radhika; Kamboj, Sunil; Singh, Gursharan; Rana, Vikas

2016-03-10

The present investigation was aimed to prepare orally disintegrating films (ODFs) containing aprepitant (APT), an antiemetic drug employing pullulan as film forming agent, tamarind pectin as wetting agent and liquid glucose as plasticizer and solubiliser. The ODFs were prepared using solvent casting method. The method was optimized employing 3(2) full factorial design considering proportion of pullulan: tamarind pectin and concentration of liquid glucose as independent variables and disintegration time, wetting time, folding endurance, tensile strength and extensibility as dependent variables. The optimized ODF was evaluated for various physicochemical, mechanical, drug release kinetics and bioavailability studies. The results suggested prepared film has uniform film surface, non-sticky and disintegrated within 18s. The in-vitro release kinetics revealed more than 87% aprepitant was released from optimized ODF as compared to 85%, 49%, and 12% aprepitant release from marketed formulation Aprecap, micronized aprepitant and non micronized aprepitant, respectively. The results of animal preference study indicated that developed aprepitant loaded ODFs are accepted by rabbits as food material. Animal pharmacokinetic (PK) study showed 1.80, 1.56 and 1.36 fold enhancement in relative bioavailability for aprepitant loaded ODF, Aprecap and micronized aprepitant respectively, in comparison with non-micronized aprepitant. Overall, the solubilised aprepitant when incorporated in the form of aprepitant loaded ODF showed enhanced bioavailability as compared to micronized/non-micronized aprepitant based oral formulations. These findings suggested that aprepitant loaded ODF could be effective for antiemesis during cancer chemotherapy. Copyright © 2016 Elsevier B.V. All rights reserved.

1 CFR 18.4 - Form of document.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.4 Form of document. (a) A printed or... processed data are urged to consult with the Office of the Federal Register staff about possible use of the...

1 CFR 18.4 - Form of document.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS PREPARATION AND TRANSMITTAL OF DOCUMENTS GENERALLY § 18.4 Form of document. (a) A printed or... processed data are urged to consult with the Office of the Federal Register staff about possible use of the...

Burnishing rolling process of the surface prepared in the turning process

NASA Astrophysics Data System (ADS)

Kulakowska, Agnieszka; Kukielka, Leon; Kaldunski, Pawel; Bohdal, Lukasz; Patyk, Radoslaw; Chodor, Jaroslaw; Kukielka, Krzysztof

2018-05-01

The aim of this article is to demonstrate the possibility of using burnishing rolling process as the technology of product development. The experimental researches were carried out, showing the ability to form the surface layer of the product with the desired properties. First, during turning rolling the surfaces of the samples were prepared. Then, the surfaces were burnished. The influence of turning process on the state of the surface layer parameters of C45 steel shafts are shown. Among the examined aspects the surface roughness, nano-roughness, material bearing, surface microstructure, metallographic structure were considered. Numerical simulation were conducted. Conclusions from the experiments and simulation were given.

Application of Various Types of Liposomes in Drug Delivery Systems

PubMed Central

Alavi, Mehran; Karimi, Naser; Safaei, Mohsen

2017-01-01

Liposomes, due to their various forms, require further exploration. These structures can deliver both hydrophilic and hydrophobic drugs for cancer, antibacterial, antifungal, immunomodulation, diagnostics, ophtalmica, vaccines, enzymes and genetic elements. Preparation of liposomes results in different properties for these systems. In addition, based on preparation methods, liposomes types can be unilamellar, multilamellar and giant unilamellar; however, there are many factors and difficulties that affect the development of liposome drug delivery structure. In the present review, we discuss some problems that impact drug delivery by liposomes. In addition, we discuss a new generation of liposomes, which is utilized for decreasing the limitation of the conventional liposomes. PMID:28507932

Breath Figure Method for Construction of Honeycomb Films

PubMed Central

Dou, Yingying; Jin, Mingliang; Zhou, Guofu; Shui, Lingling

2015-01-01

Honeycomb films with various building units, showing potential applications in biological, medical, physicochemical, photoelectric, and many other areas, could be prepared by the breath figure method. The ordered hexagonal structures formed by the breath figure process are related to the building units, solvents, substrates, temperature, humidity, air flow, and other factors. Therefore, by adjusting these factors, the honeycomb structures could be tuned properly. In this review, we summarized the development of the breath figure method of fabricating honeycomb films and the factors of adjusting honeycomb structures. The organic-inorganic hybrid was taken as the example building unit to discuss the preparation, mechanism, properties, and applications of the honeycomb films. PMID:26343734

Facile preparation of robust microcapsules by manipulating metal-coordination interaction between biomineral layer and bioadhesive layer.

PubMed

Zhang, Lei; Shi, Jiafu; Jiang, Zhongyi; Jiang, Yanjun; Meng, Ruijie; Zhu, Yuanyuan; Liang, Yanpeng; Zheng, Yang

2011-02-01

A novel approach combining biomimetic mineralization and bioadhesion is proposed to prepare robust and versatile organic-inorganic hybrid microcapsules. More specifically, these microcapsules are fabricated by sequential deposition of inorganic layer and organic layer on the surface of CaCO(3) microparticles, followed by the dissolution of CaCO(3) microparticles using EDTA. During the preparation process, protamine induces the hydrolysis and condensation of titania or silica precursor to form the inorganic layer or the biomineral layer. The organic layer or bioadhesive layer was formed through the rapid, spontaneous oxidative polymerization of dopamine into polydopamine (PDA) on the surface of the biomineral layer. There exist multiple interactions between the inorganic layer and the organic layer. Thus, the as-prepared organic-inorganic hybrid microcapsules acquire much higher mechanical stability and surface reactivity than pure titania or pure silica microcapsules. Furthermore, protamine/titania/polydopamine hybrid microcapsules display superior mechanical stability to protamine/silica/polydopamine hybrid microcapsules because of the formation of Ti(IV)-catechol coordination complex between the biomineral layer and the bioadhesive layer. As an example of application, three enzymes are respectively immobilized through physical encapsulation in the lumen, in situ entrapment within the wall and chemical attachment on the out surface of the hybrid microcapsules. The as-constructed multienzyme system displays higher catalytic activity and operational stability. Hopefully, the approach developed in this study will evolve as a generic platform for facile and controllable preparation of organic-inorganic hybrid materials with different compositions and shapes for a variety of applications in catalysis, sensor, drug/gene delivery.

Preparation of alpha sources using magnetohydrodynamic electrodeposition for radionuclide metrology.

PubMed

Panta, Yogendra M; Farmer, Dennis E; Johnson, Paula; Cheney, Marcos A; Qian, Shizhi

2010-02-01

Expanded use of nuclear fuel as an energy resource and terrorist threats to public safety clearly require the development of new state-of-the-art technologies and improvement of safety measures to minimize the exposure of people to radiation and the accidental release of radiation into the environment. The precision in radionuclide metrology is currently limited by the source quality rather than the detector performance. Electrodeposition is a commonly used technique to prepare massless radioactive sources. Unfortunately, the radioactive sources prepared by the conventional electrodeposition method produce poor resolution in alpha spectrometric measurements. Preparing radioactive sources with better resolution and higher yield in the alpha spectrometric range by integrating magnetohydrodynamic convection with the conventional electrodeposition technique was proposed and tested by preparing mixed alpha sources containing uranium isotopes ((238)U, (234)U), plutonium ((239)Pu), and americium ((241)Am) for alpha spectrometric determination. The effects of various parameters such as magnetic flux density, deposition current and time, and pH of the sample solution on the formed massless radioactive sources were also experimentally investigated. Copyright 2009 Elsevier Inc. All rights reserved.

Preparation and performance of arsenate (V) adsorbents derived from concrete wastes.

PubMed

Sasaki, Takeshi; Iizuka, Atsushi; Watanabe, Masayuki; Hongo, Teruhisa; Yamasaki, Akihiro

2014-10-01

Solid adsorbent materials, prepared from waste cement powder and concrete sludge were assessed for removal of arsenic in the form of arsenic (As(V)) from water. All the materials exhibited arsenic removal capacity when added to distilled water containing 10-700 mg/L arsenic. The arsenic removal isotherms were expressed by the Langmuir type equations, and the highest removal capacity was observed for the adsorbent prepared from concrete sludge with heat treatment at 105°C, the maximum removal capacity being 175 mg-As(V)/g. Based on changes in arsenic and calcium ion concentrations, and solution pH, the removal mechanism for arsenic was considered to involve the precipitation of calcium arsenate, Ca3(AsO4)2. The enhanced removal of arsenic for the adsorbent prepared from concrete sludge with heat treatment was thought to reflect ion exchange by ettringite. The prepared adsorbents, derived from waste cement and concrete using simple procedures, may offer a cost effective approach for arsenic removal and clean-up of contaminated waters, especially in developing countries. Copyright © 2014 Elsevier Ltd. All rights reserved.

Self dispersing mixed micelles forming systems for enhanced dissolution and intestinal permeability of hydrochlorothiazide.

PubMed

Sultan, Amal A; El-Gizawy, Sanaa A; Osman, Mohamed A; El Maghraby, Gamal M

2017-01-01

Mixed micelles provide promising strategy for enhancing dissolution and permeability of drugs. However, their fluid nature limited the stability of the loaded drug and hindered the development of stable oral dosage form. Accordingly, the objective was to develop solid self dispersing mixed micelle forming systems (MMFS) for enhanced dissolution and intestinal permeability of hydrochlorothiazide. Pseudoternary phase diagrams were constructed using sodium cholate, lecithin with either poloxamer 407 or PEG 4000 to determine the composition of MMFS. Both polymer free and poloxamer or PEG containing MMFS were prepared as homogenous matrices or as solid self dispersing powder. The later was developed by adsorption of MMFS on avicel-aerosil mixture. Differential scanning calorimetry provided an evidence for existence of hydrochlorothiazide as molecular dispersion in the MMFS. Dispersing polymer free, PEG 4000 or poloxamer based MMFS in aqueous medium produced micelles having size values of 119, 52.6 and 28nm, respectively. The zeta potential values were -61.8, -59.5 and -19.5mV for the same systems, respectively. Preparation of solid self dispersing MMFS enhanced the dissolution rate of hydrochlorothiazide. The intestinal absorption of hydrochlorothiazide from its aqueous solution and polymer incorporating mixed micellar systems was monitored using in situ rabbit intestinal perfusion technique. The permeability results showed a clear trend for enhanced membrane transport of the drug after being incorporated into poloxamer containing mixed micellar system. The study thus introduced a versatile easily formulated solid self dispersing system with high potential for solving the dissolution and permeability problems of class IV drugs. Copyright © 2016 Elsevier B.V. All rights reserved.

The Application of Fishbone Diagram Analysis to Improve School Quality

ERIC Educational Resources Information Center

Slameto

2016-01-01

With the enactment of the National Education Standards (NES), the measurement of the school quality was clear; NES became a reference for school development program to improve the school quality. However, the form of the program that exist still in problematic, so that a good proposal need to be prepared. In the real condition, the school shows,…

Arts across the Disciplines: Using the Voices of the Oppressed and Vulnerable to Inspire Analytical Thinking in the Human Services Curricula

ERIC Educational Resources Information Center

Peters, Ardith A.; McClatchey, Irene S.

2017-01-01

This paper addresses how professors in a Social Work and Human Services Program in the Southeastern United States include voices of the oppressed and vulnerable through art forms to develop analytical thinking to prepare human service practitioners. This pedagogical practice is based on Gardner's discussion of Multiple Intelligences. The authors…

Rising against a Gathering Storm: A Biopolitical Analysis of Citizenship in STEM Policy

ERIC Educational Resources Information Center

Hoeg, Darren; Bencze, Larry

2017-01-01

Science, technology, engineering and mathematics (STEM) is a form of education seen by many governments and educators as a preparation of the types of students needed for the future. STEM education is being developed in many countries without the support of official policy, such as is the case in Canada. In the United States, the National Science…

75 FR 30800 - Notice of Intent To Prepare an Environmental Impact Statement for Texas Clean Energy Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

... technologies used to generate electricity from fossil fuels, including natural gas. Summit proposes to build... feedstock. It would capture, in the form of CO 2 , about 90% of the carbon in the portion of its coal fuel... (Feb. 17, 2009)) (ARRA) appropriated $3.4 billion to DOE for ``Fossil Energy Research and Development...

Research of plasmon resonance in developed holographic photomaterials

NASA Astrophysics Data System (ADS)

Andreeva, N. V.; Kuzmina, T. B.; Andreeva, O. V.

2016-08-01

The research of aqueous suspensions of colloidal particles of silver obtained by photographic method was carried out, two optical methods were used: the standard photometric method and the method of dynamic light scattering. It is shown that in the researched preparations, which attenuation spectra in the visible region have a close form, distribution of the particles by sizes could vary considerably.

Social Science of Physical Education and Sport: Reflections and Future Directions. 1986 Alliance Scholar Lecture.

ERIC Educational Resources Information Center

Sage, George H.

The form and content of preservice programs for physical education teachers are in the hands of those individuals who develop curricula. Courses in sports studies--such as the sociology of sports and sport psychology--need to be an integral part of such programs. Preservice preparation programs can be reorganized to contain this important element.…

Newly Qualified Teachers' Needs of Support for Professional Competences in Four European Countries: Finland, the United Kingdom, Portugal, and Belgium

ERIC Educational Resources Information Center

Harju, Vilhelmiina; Niemi, Hannele

2016-01-01

The first few years in the teaching profession are usually demanding. Although initial teacher education forms an essential foundation for teachers' work, it cannot fully prepare new teachers for the complexities of working life. This study focuses on investigating the need for professional development support among newly qualified teachers to…

Community of Interest Engagement Process Plan

DTIC Science & Technology

2012-02-09

and input from Subject Matter Experts (SMEs), as shown in the far left of Figure 2. The team may prepare a Business Process Model Notation ( BPMN ) 22...22 Business Process Modeling Notation ( BPMN ) is a method of illustrating business processes in the form of a...Community of Interest Engagement Plan Joint Planning and Development Office 21 10. Acronyms BPMN Business Process Modeling Notation COI

Sustainable hybrid photocatalysts: titania immobilized on ...

EPA Pesticide Factsheets

This review comprises the preparation, properties and heterogeneous photocatalytic applications of TiO2 immobilized on carbon materials derived from earth-abundant, renewable and biodegradable agricultural residues and sea food waste resources. The overview provides key scientific insights into widely used TiO2 supported on carbonaceous materials emanating from biopolymeric materials such as lignin, cellulose, cellulose acetate, bacterial cellulose, bamboo, wood, starch, chitosan and agricultural residues (biochar, charcoal, activated carbon and their magnetic forms, coal fly ash) or seafood wastes namely eggshell, clamshell and fish scales; materials that serve as a support/template for TiO2. Heightened awareness and future inspirational developments for the valorisation of various forms of carbonaceous functional materials is the main objective. This appraisal abridges various strategies available to upgrade renewable carbon-based feedstock via the generation of sustainable TiO2/carbon functional materials and provides remarks on their future prospects. Hopefully, this will stimulate the development of efficient and novel composite photocatalysts and engender the necessary knowledge base for further advancements in greener photocatalytic technologies. Prepared as a Critical Review for the Royal Society of Chemistry (RSC) journal, Green Chemistry. This review discusses the sustainable use of earth-abundant materials exemplified by Titanium dioxide and carbon.

Process for producing ceramic nitrides and carbonitrides and their precursors

DOEpatents

Brown, Gilbert M.; Maya, Leon

1988-01-01

A process for preparing ceramic nitrides and carbonitrides in the form of very pure, fine particulate powder. Appropriate precursor is prepared by reacting a transition metal alkylamide with ammonia to produce a mixture of metal amide and metal imide in the form of an easily pyrolyzable precipitate.

Process for producing ceramic nitrides anc carbonitrides and their precursors

DOEpatents

Brown, G.M.; Maya, L.

1987-02-25

A process for preparing ceramic nitrides and carbon nitrides in the form of very pure, fine particulate powder. Appropriate precursors is prepared by reaching a transition metal alkylamide with ammonia to produce a mixture of metal amide and metal imide in the form of an easily pyrolyzable precipitate.

Diphenylmethane-containing dianhydride and polyimides prepared therefrom

NASA Technical Reports Server (NTRS)

St.clair, Anne K. (Inventor); Boston, Harold G. (Inventor); Pratt, J. Richard (Inventor)

1993-01-01

A high temperature stable, highly optically transparent-to-colorless, low dielectic linear aromatic polyimide is prepared by reacting an aromatic diamine with 3,3'bis (3,4-dicarboxyphenoxy) diphenylmethane dianhydride in an amide solvent to form a linear aromatic polyamic acid. This polyamic acid is then cyclized to form the corresponding polyimide.

Best Practice No 177: Best practice guideline: writing a business case for service development in pathology.

PubMed

Galloway, M J

2004-04-01

This guideline reviews the introduction and development of business planning in the National Health Service. A guideline for writing a business case for service development that would form part of a pathology business plan has been developed. This guideline outlines six steps that are required in the preparation of a business case. The format of the guideline has been developed largely from other national guidelines that have been published for the development of capital projects. In view of the publication of these guidelines, the scope of this guideline excludes business cases for information, management, and technology projects and large capital projects.

Impact of a Student Leadership Development Program

PubMed Central

Tran-Johnson, Jennifer

2013-01-01

Objective. To assess the effectiveness of the Student Leadership Development Series (SLDS), an academic-year--long, co-curricular approach to developing leadership skills in pharmacy students. Design. Participants met once per month for activities and a college-wide guest speaker session. Students also completed monthly forms regarding what they had learned, participated in poster presentations, and created a personal leadership platform. Assessment. One hundred twenty-three students participated in the program between 2008 and 2013. On monthly evaluation forms and a summative evaluation, students indicated that the program helped them feel prepared for leadership opportunities and increased their desire to pursue leadership. They valued interacting with pharmacy leaders from the community and learning how they could distinguish themselves as leaders. Conclusions. The SLDS provided pharmacy students with an opportunity to explore personal leadership styles and develop broader understanding of leadership, and increased their desire to pursue leadership positions in the future. PMID:24371349

Impact of a student leadership development program.

PubMed

Chesnut, Renae; Tran-Johnson, Jennifer

2013-12-16

To assess the effectiveness of the Student Leadership Development Series (SLDS), an academic-year--long, co-curricular approach to developing leadership skills in pharmacy students. Participants met once per month for activities and a college-wide guest speaker session. Students also completed monthly forms regarding what they had learned, participated in poster presentations, and created a personal leadership platform. One hundred twenty-three students participated in the program between 2008 and 2013. On monthly evaluation forms and a summative evaluation, students indicated that the program helped them feel prepared for leadership opportunities and increased their desire to pursue leadership. They valued interacting with pharmacy leaders from the community and learning how they could distinguish themselves as leaders. The SLDS provided pharmacy students with an opportunity to explore personal leadership styles and develop broader understanding of leadership, and increased their desire to pursue leadership positions in the future.

Energy Engineering Analysis Program (EEAP), Badger Army Ammunition Plant, Baraboo, Wisconsin: Executive summary. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1983-12-30

The purpose of this study and report is to develop a systematic program of energy consumption reductions in compliance with the stated goals of the Army Facilities Energy Plan (AFEP). This report will: Develop a systematic plan of energy conservation opportunities (ECO`s) that will meet the objectives of the AFEP. Develop a coordinated facility-wide energy study. Prepare DD Form 1391 and Project Development Brochure (PDB`s) and required documentation for feasible projects. Include all practical energy conservation methods and determine economic feasibility in accordance with given guidelines. List and prioritize recommended projects.

Method for preparing hydrous iron oxide gels and spherules

DOEpatents

Collins, Jack L.; Lauf, Robert J.; Anderson, Kimberly K.

2003-07-29

The present invention is directed to methods for preparing hydrous iron oxide spherules, hydrous iron oxide gels such as gel slabs, films, capillary and electrophoresis gels, iron monohydrogen phosphate spherules, hydrous iron oxide spherules having suspendable particles homogeneously embedded within to form composite sorbents and catalysts, iron monohydrogen phosphate spherules having suspendable particles of at least one different sorbent homogeneously embedded within to form a composite sorbent, iron oxide spherules having suspendable particles homogeneously embedded within to form a composite of hydrous iron oxide fiber materials, iron oxide fiber materials, hydrous iron oxide fiber materials having suspendable particles homogeneously embedded within to form a composite, iron oxide fiber materials having suspendable particles homogeneously embedded within to form a composite, dielectric spherules of barium, strontium, and lead ferrites and mixtures thereof, and composite catalytic spherules of barium or strontium ferrite embedded with oxides of Mg, Zn, Pb, Ce and mixtures thereof. These variations of hydrous iron oxide spherules and gel forms prepared by the gel-sphere, internal gelation process offer more useful forms of inorganic ion exchangers, catalysts, getters, dielectrics, and ceramics.

Automated Sample Preparation (ASP): Development of a Rapid Method to Sequentially Isolate Nucleic Acids and Protein from Any Sample Type by a Cartridge-Based System

DTIC Science & Technology

2013-11-27

SECURITY CLASSIFICATION OF: CUBRC has developed an in-line, multi-analyte isolation technology that utilizes solid phase extraction chemistries to purify...goals. Specifically, CUBRC will design and manufacture a prototype cartridge(s) and test the prototype cartridge for its ability to isolate each...display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. CUBRC , Inc. P. O. Box 400 Buffalo, NY 14225 -1955

Development of a PET Prostate-Specific Membrane Antigen Imaging Agent: Preclinical Translation for Future Clinical Application

DTIC Science & Technology

2017-10-01

94103 REPORT DATE : October 2017 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland...display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE October 2017 2. REPORT TYPE...Annual 3. DATES COVERED 30 Sep 2016 - 29 Sep 2017 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Development of a PET Prostate-Specific Membrane Antigen

Development of Tethered Hsp90 Inhibitors Carrying Radioiodinated Probes to Specifically Discriminate and Kill Malignant Breast Tumor Cells

DTIC Science & Technology

2017-05-01

DATE : May 2017 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE May 2017 2. REPORT TYPE Annual 3. DATES COVERED...chemistry efforts to synthesize a non-radioactive tethered Hsp90 inhibitor, methods developed for stannylation of the molecule such that it can be

Development of Tethered Hsp90 Inhibitors Carrying Radioiodinated Probes to Specifically Discriminate and Kill Malignant Breast Tumor Cells

DTIC Science & Technology

2017-05-01

REPORT DATE : May 2017 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE May 2017 2. REPORT TYPE Annual 3. DATES ... methods developed for stannylation of the molecule such that it can be effectively radioiodinated with either 131I or 124I. Two paths of synthesis

Gel-forming reagents and uses thereof for preparing microarrays

DOEpatents

Golova, Julia; Chernov, Boris; Perov, Alexander

2010-11-09

New gel-forming reagents including monomers and cross-linkers, which can be applied to gel-drop microarray manufacturing by using co-polymerization approaches are disclosed. Compositions for the preparation of co-polymerization mixtures with new gel-forming monomers and cross-linker reagents are described herein. New co-polymerization compositions and cross-linkers with variable length linker groups between unsaturated C.dbd.C bonds that participate in the formation of gel networks are disclosed.

Immunological Relationship of Different Preparations of Coliform Enterotoxins

PubMed Central

Klipstein, Frederick A.; Engert, Richard F.

1978-01-01

Antisera raised in rabbits to ultrafiltrate toxin preparations containing either the heat-labile (LT) toxin form obtained from whole cell lysates or broth filtrates or the heat-stable (ST) toxin form prepared from broth filtrates from nontoxigenic and toxigenic strains of Escherichia coli and Klebsiella were examined for their ability to neutralize the secretory effect on water transport of these toxins in the rat jejunum as determined by the in vivo marker perfusion technique. Antisera to the heat-labile toxin derived from whole cell lysate preparations from nontoxigenic strains had no neutralizing effect. Antisera to both types of LT preparation from both toxigenic strains neutralized, with several exceptions, all of the homologous and heterologous LT toxins as well as a heat-labile toxin preparation derived from sequential ultrafiltration of cell-free whole cell lysates which had a defined molecular weight of between 30,000 and 100,000. These antisera also neutralized homologous and heterologous ST preparations obtained from broth filtrates, but they had no neutraliziṅg effect on low-molecular-weight, ST toxin material obtained during the sequential ultrafiltration of cell lysates. Antisera to ST prepared from broth filtrates had no neutralizing capacity against either LT or ST toxin preparations. These observations (i) indicate that the immunological relationship of E. coli and Klebsiella LT and ST toxins extends to antisera raised against LT prepared by several different methods, (ii) raise the possibility that, based on the response to antisera to LT, there may be several immunologically heterogeneous forms of low-molecular-weight ST toxin, and (c) confirm the lack of immunogenicity of ST. PMID:361578

Methods and apparatuses for preparing upgraded pyrolysis oil

DOEpatents

Brandvold, Timothy A; Baird, Lance Awender; Frey, Stanley Joseph

2013-10-01

Methods and apparatuses for preparing upgraded pyrolysis oil are provided herein. In an embodiment, a method of preparing upgraded pyrolysis oil includes providing a biomass-derived pyrolysis oil stream having an original oxygen content. The biomass-derived pyrolysis oil stream is hydrodeoxygenated under catalysis in the presence of hydrogen to form a hydrodeoxygenated pyrolysis oil stream comprising a cyclic paraffin component. At least a portion of the hydrodeoxygenated pyrolysis oil stream is dehydrogenated under catalysis to form the upgraded pyrolysis oil.

Nursing students' and preceptors' perceptions of using a revised assessment form in clinical nursing education.

PubMed

Löfmark, Anna; Thorell-Ekstrand, Ingrid

2014-05-01

Assessment of students' learning is a crucial question when great changes occur in the higher education sector. One such educational reform is the Bologna declaration, the requirements of which have resulted in significant modifications in documents as assessment forms for clinical education. The aim of this study was to investigate students' and preceptors' perceptions of using the revised version of an assessment form, the AssCE form. Using convenience sampling, a questionnaire survey was completed by 192 nursing students and 101 preceptors. Most of the participants found that the revised AssCE form was possible to use during different years of the programme, and factors in the AssCE form were possible to combine with learning outcomes in the course syllabus. Most participants perceived that the scale added to each factor facilitated the assessment dialogue and offered possibilities to illustrate the students' development during clinical periods. Findings also showed that students were most often prepared with self-assessment before the assessment discussions. More information about the use of the AssCE form, also in combination with learning outcomes in the course syllabus, may further support the use of the form and contribute to students' development during clinical practice. Copyright © 2013 Elsevier Ltd. All rights reserved.

Physical and Chemical Stability of Mycophenolate Mofetil (MMF) Suspension Prepared at the Hospital

PubMed Central

Fahimi, Fanak; Baniasadi, Shadi; Mortazavi, Seyed Alireza; Dehghan, Hanie; Zarghi, Afshin

2012-01-01

To evaluate the physical and chemical stability of a suspension of mycophenolate mofetil (MMF) prepared in the hospital from commercially available MMF capsules and tablets. Extemporaneous pharmacy was used as a feasible method in this experimental study to prepare suspension form of MMF. Suspension formulations were prepared from both tablets and capsules forms of MMF. Thereafter the stability parameters such as pH, microbial control, thermal and physical stability and particle sizes were evaluated. The amount of MMF, in the suspension was measured at various time points by HPLC. The HPLC method showed that concentration of suspensions prepared from tablets and capsules were 49 mg/mL and 50 mg/mL at time 0, respectively. The effective amount of suspensions prepared from capsules was 101% at time 0, 100% after 7 days, 98% after 14 days, and less than 70% after 28 days. According to the obtained results in this study, capsule-based suspension was stable for as long as 14 days at 5°C. This formulation appears to be clinically acceptable and provides a convenient dosage form for pediatric patients and for adults during the early postoperative period. PMID:24250439

Development of an enantioselective synthetic route to neocarzinostatin chromophore and its use for multiple radioisotopic incorporation.

PubMed

Myers, Andrew G; Glatthar, Ralf; Hammond, Marlys; Harrington, Philip M; Kuo, Elaine Y; Liang, Jun; Schaus, Scott E; Wu, Yusheng; Xiang, Jia-Ning

2002-05-15

A convergent, enantioselective synthetic route to the natural product neocarzinostatin chromophore (1) is described. Synthesis of the chromophore aglycon (2) was targeted initially. Chemistry previously developed for the synthesis of a neocarzinostatin core model (4) failed in the requisite 1,3-transposition of an allylic silyl ether when applied toward the preparation of 2 with use of the more highly oxygenated substrates 27 and 54. An alternative synthetic plan was therefore developed, based upon a proposed reduction of the epoxy alcohol 58 to form the aglycon 2, a transformation that was achieved in a novel manner, using a combination of the reagents triphenylphosphine, iodine, and imidazole. The successful route to 1 and 2 began with the convergent coupling of the epoxydiyne 15, obtained in 9 steps (43% overall yield) from D-glyceraldehyde acetonide, and the cyclopentenone (+)-14, prepared in one step (75-85% yield) from the prostaglandin intermediate (+)-16, affording the alcohol 22 in 80% yield and with > or =20:1 diastereoselectivity. The alcohol 22 was then converted into the epoxy alcohol 58 in 17 steps with an average yield of 92% and an overall yield of 22%. Key features of this sequence include the diastereoselective Sharpless asymmetric epoxidation of allylic alcohol 81 (98% yield); intramolecular acetylide addition within the epoxy aldehyde 82, using Masamune's lithium diphenyltetramethyldisilazide base (85% yield); selective esterification of the diol 84 with the naphthoic acid 13 followed by selective cleavage of the chloroacetate protective group in situ to furnish the naphthoic acid ester 85 in 80% yield; and elimination of the tertiary hydroxyl group within intermediate 88 using the Martin sulfurane reagent (79% yield). Reductive transposition of the product epoxy alcohol (58) then formed neocarzinostatin chromophore aglycon (2, 71% yield). Studies directed toward the glycosylation of 2 focused initially on the preparation of the N-methylamino --> hydroxyl replacement analogue 3, an alpha-D-fucose derivative of neocarzinostatin chromophore, formed in 42% yield by a two-step Schmidt glycosylation-deprotection sequence. For the synthesis of 1, an extensive search for a suitable 2'-N-methylfucosamine glycosyl donor led to the discovery that the reaction of 2 with the trichloroacetimidate 108, containing a free N-methylamino group, formed the alpha-glycoside 114 selectively in the presence of boron trifluoride diethyl etherate. Subsequent deprotection of 114 under mildly acidic conditions then furnished the labile chromophore (1). The synthetic route was readily modified for the preparation of singly and doubly (3)H- and (14)C-labeled 1, compounds unavailable by other means, for studies of the mechanism of action of neocarzinostatin in vivo.

[Managment in nursing and the administration of third sector organizations].

PubMed

Ruthes, Rosa Maria; Cunha, Isabel Cristina Kowal Olm

2006-01-01

In this article of bibliographical revision it was aimed at verifying the evolution of the third sector and the relations between nursing management in that organizations. It is observed a growing of this sector in health area, bringing a market anplification in the work of the nurse. Thus, it is considered the need for warning the nurses to be prepared for the management in these organizations, seeking for development in hospital management. Third sector is being valued as a form of social promotion in the health, education, social assistance and others segments, congregating individuals and institutions in a participative form.

Low density, microcellular foams, preparation, and articles

DOEpatents

Young, Ainslie T.; Marsters, Robert G.; Moreno, Dawn K.

1984-01-01

A microcellular low density foam of poly(4-methyl-1-pentene) which is particularly useful for forming targets for inertial confinement fusion has been developed. Articles made from the foam have been machined to tolerances of 0.0001 inch, although the densities of the fragile foam are low (about 10 to about 100 mg/cc) and the cell sizes are small (about 10 to about 30 .mu.m). Methods for forming the foam and articles are given; and the yield strength of the foam of the invention is higher than was obtained in other structures of this same material.

Small-Molecule Inhibitor Leads of Ribosome-Inactivating Proteins Developed Using the Doorstop Approach

DTIC Science & Technology

2011-03-01

stereochemistry of R22 used in our virtual screen. R20 or R20b was prepared by coupling 4-formylbenzoic acid with a substituted pyrrole in the keto form for R20 or...a mixture of keto and enol forms for R20b according to a reported process [42] (Figure 4). The substituted pyrrole was obtained via cyclization of 2...1H- pyrrole -3-carboxylate—a close ana- log of R20b—has been reported to have the Z stereochemistry [45]. Therefore, identification of R20 as an active

Evaluating the efficiency of spectral resolution of univariate methods manipulating ratio spectra and comparing to multivariate methods: An application to ternary mixture in common cold preparation

NASA Astrophysics Data System (ADS)

Moustafa, Azza Aziz; Salem, Hesham; Hegazy, Maha; Ali, Omnia

2015-02-01

Simple, accurate, and selective methods have been developed and validated for simultaneous determination of a ternary mixture of Chlorpheniramine maleate (CPM), Pseudoephedrine HCl (PSE) and Ibuprofen (IBF), in tablet dosage form. Four univariate methods manipulating ratio spectra were applied, method A is the double divisor-ratio difference spectrophotometric method (DD-RD). Method B is double divisor-derivative ratio spectrophotometric method (DD-RD). Method C is derivative ratio spectrum-zero crossing method (DRZC), while method D is mean centering of ratio spectra (MCR). Two multivariate methods were also developed and validated, methods E and F are Principal Component Regression (PCR) and Partial Least Squares (PLSs). The proposed methods have the advantage of simultaneous determination of the mentioned drugs without prior separation steps. They were successfully applied to laboratory-prepared mixtures and to commercial pharmaceutical preparation without any interference from additives. The proposed methods were validated according to the ICH guidelines. The obtained results were statistically compared with the official methods where no significant difference was observed regarding both accuracy and precision.

Method for preparing actinide nitrides

DOEpatents

Bryan, G.H.; Cleveland, J.M.; Heiple, C.R.

1975-12-01

Actinide nitrides, and particularly plutonium and uranium nitrides, are prepared by reacting an ammonia solution of an actinide compound with an ammonia solution of a reactant or reductant metal, to form finely divided actinide nitride precipitate which may then be appropriately separated from the solution. The actinide nitride precipitate is particularly suitable for forming nuclear fuels.

38 CFR 41.235 - Program-specific audits.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Federal clearinghouse designated by OMB the data collection form prepared in accordance with § 41.320(b...-specific audit guide is not available, the reporting package for a program-specific audit shall consist of...) described in paragraph (b)(4) of this section. The data collection form prepared in accordance with § 41.320...

38 CFR 41.235 - Program-specific audits.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Federal clearinghouse designated by OMB the data collection form prepared in accordance with § 41.320(b...-specific audit guide is not available, the reporting package for a program-specific audit shall consist of...) described in paragraph (b)(4) of this section. The data collection form prepared in accordance with § 41.320...

38 CFR 41.235 - Program-specific audits.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Federal clearinghouse designated by OMB the data collection form prepared in accordance with § 41.320(b...-specific audit guide is not available, the reporting package for a program-specific audit shall consist of...) described in paragraph (b)(4) of this section. The data collection form prepared in accordance with § 41.320...

38 CFR 41.235 - Program-specific audits.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Federal clearinghouse designated by OMB the data collection form prepared in accordance with § 41.320(b...-specific audit guide is not available, the reporting package for a program-specific audit shall consist of...) described in paragraph (b)(4) of this section. The data collection form prepared in accordance with § 41.320...

Exploratory development of an electrically rechargeable lithium battery

NASA Astrophysics Data System (ADS)

Abraham, K. M.; Goldman, J. L.; Dempsey, M. D.; Holleck, G. L.

1980-10-01

The cathodic behavior or V6013 was investigated in rechargeable Li cells of the type, Li/2Me-THF,LiAsF6/V6013,C. Two forms of V6013 were synthesized and characterized. These were a stoichiometric form, i.e., V02.17, and a slightly non-stoichiometric form, i.e., V02.19. Stoichiometric V6013 was prepared by heating requisite quantities of V205 and V powder for 24 hrs. at 650 C. The slightly non-stoichiometric V6013 was prepared by the thermal decomposition of NH4V03 at 450 C. The discharge characteristics of the stoichiometric oxide at 60 C were similar to that of non-stoichiometric oxide at room temperature. The rechargeability of both the oxides were found to be sensitive to the lower voltage cutoff. The safest limits of cycling were 3.0 and 1.9V. Potentiostatic discharges of the oxides between 1.9 and 1.3V revealed a high capacity irreversible reduction process at about 1.6V. Three types of hermetically sealed cells were constructed and tested. In a high capacity (5Ah) prismatic cell utilizing the non-stoichiometric oxide, energy densities of 106 Whr/kg and 190 Whr/DM3 were achieved.

Porous PVDF/PANI ion-exchange membrane (IEM) modified by polyvinylpyrrolidone (PVP) and lithium chloride in the application of membrane capacitive deionisation (MCDI).

PubMed

Zhang, Yiming; Zhang, Wei; Cházaro-Ruiz, Luis F

2018-05-01

In this work, polyvinylidene fluoride (PVDF)/polyaniline (PANI) heterogeneous anion-exchange membranes filled with pore-forming agents polyvinylpyrrolidone (PVP) and lithium chloride were prepared by the solution-casting technique using the solvent 1-methyl-2-pyrrolidone (NMP) and a two-step phase inversion procedure. Key properties of the as-prepared membranes, such as hydrophilicity, water content, ion exchange capacity, fixed ion concentration, conductivity and transport number were examined and compared between membranes in different conditions. The pore-forming hydrophilic additives PVP and lithium chloride to the casting solution appeared to improve the ion-exchange membranes (IEMs) by increasing the conductivity, transport number and hydrophilicity. The effects of increasing membrane drying time on the porosity of the as-prepared membranes were found to lower membrane porosity by reducing membrane water content. However, pore-forming agents were found to be able to stabilise membrane transport number with different drying times. As-prepared PVDF/PANI anion-exchange membrane with pore-forming agent is demonstrated to be a more efficient candidate for water purification (e.g. desalination) and other industrial applications.

A Process for Preparing 1,3-Diamino-5-Pentafluorosulfanylbenzene and Polymers Therefrom

NASA Technical Reports Server (NTRS)

St.clair, Anne K. (Inventor); St.clair, Terry L. (Inventor); Thrasher, Joseph S. (Inventor)

1991-01-01

Diamines have shown their utility in the formation of many polymers. Examples of these polymers include polyimides, polyamides, and epoxies. The properties of these polymers are often dependent on the diamine which is used to make the polymer. By the present invention, a process was developed to make a diamine containing pentafluorosulfanylbenzene moiety. This process involves two steps: the preparation of a dinitro precursor and the reduction of the dinitro compound to form the diamine. This diamine was then reacted with various dianhydrides, diacidchlorides, and epoxy resins to yield the corresponding polyimide, polyamide, and epoxy polymers. These polymers were then used to make films, a wire coating enamel, and a semi-permeable membrane. The novelty of this invention resides in the process to make the diamine. Traditionally, dinitro compounds are reduced with hydrazine or a catalyst such as palladium on charcoal. The catalyst which is used in this invention is platinum oxide. When this catalyst is used, it makes it possible to form a polymer-grade diamine.

Ex vivo mammalian prions are formed of paired double helical prion protein fibrils.

PubMed

Terry, Cassandra; Wenborn, Adam; Gros, Nathalie; Sells, Jessica; Joiner, Susan; Hosszu, Laszlo L P; Tattum, M Howard; Panico, Silvia; Clare, Daniel K; Collinge, John; Saibil, Helen R; Wadsworth, Jonathan D F

2016-05-01

Mammalian prions are hypothesized to be fibrillar or amyloid forms of prion protein (PrP), but structures observed to date have not been definitively correlated with infectivity and the three-dimensional structure of infectious prions has remained obscure. Recently, we developed novel methods to obtain exceptionally pure preparations of prions from mouse brain and showed that pathogenic PrP in these high-titre preparations is assembled into rod-like assemblies. Here, we have used precise cell culture-based prion infectivity assays to define the physical relationship between the PrP rods and prion infectivity and have used electron tomography to define their architecture. We show that infectious PrP rods isolated from multiple prion strains have a common hierarchical assembly comprising twisted pairs of short fibres with repeating substructure. The architecture of the PrP rods provides a new structural basis for understanding prion infectivity and can explain the inability to systematically generate high-titre synthetic prions from recombinant PrP. © 2016 The Authors.

Supramolecular Cocrystals of Gliclazide: Synthesis, Characterization and Evaluation.

PubMed

Chadha, Renu; Rani, Dimpy; Goyal, Parnika

2017-03-01

To prepare the supramolecular cocrystals of gliclazide (GL, a BCS class II drug molecule) via mechanochemical route, with the goal of improving physicochemical and biopharmaceutical properties. Two cocrystals of GL with GRAS status coformers, sebacic acid (GL-SB; 1:1) and α-hydroxyacetic acid (GL-HA; 1:1) were screened out using liquid assisted grinding. The prepared cocrystals were characterized using thermal and analytical techniques followed by evaluation of antidiabetic activity and pharmacokinetic parameters. The generation of new, single and pure crystal forms was characterized by DSC and PXRD. The crystal structure determination from PXRD revealed the existence of both cocrystals in triclinic (P-1) crystal system. The hydrogen bonded network, determined by material studio was well supported by shifts in FTIR and SSNMR. Both the new solid forms displayed improved solubility, IDR, antidiabetic activity and pharmacokinetic parameters as compared to GL. The improvement in these physicochemical and biopharmaceutical properties corroborated the fact that the supramolecular cocrystallization may be useful in the development of pharmaceutical crystalline materials with interesting network and properties.

Superior Na-ion storage properties of high aspect ratio SnSe nanoplates prepared by a spray pyrolysis process

NASA Astrophysics Data System (ADS)

Park, Gi Dae; Lee, Jong-Heun; Kang, Yun Chan

2016-06-01

SnSe nanoplates with thin and uniform morphology are prepared by one-pot spray pyrolysis, and are examined as anode materials for Na-ion batteries. During the spray pyrolysis process, metallic Se and Sn are prepared from SeO2 and SnO2, respectively, under a reducing atmosphere. Metallic Sn and metalloid Se, with melting points of 232 and 221 °C, respectively, form a melted Sn-Se mixture, which reacts exothermally to form SnSe nanocrystals. Several of these nanocrystals are grown simultaneously forming a micron-sized powder. Complete elimination of the excess amount of metalloid Se, by forming H2Se gas, results in aggregation-free SnSe nanoplates. The aspect ratio of these nanoplates is as high as 11.3. The discharge capacities for the SnSe nanoplates, prepared from spray solutions containing 100, 400, and 800% of the stoichiometric SeO2 content needed to form SnSe, are 407, 558, and 211 mA h g-1, respectively, after 50 cycles at a constant current density of 0.3 A g-1 their capacity retentions calculated from the second cycle onwards are 77, 100, and 60%, respectively. The phase pure SnSe nanoplates with a high aspect ratio show good cycling and rate performances for Na-ion storage.SnSe nanoplates with thin and uniform morphology are prepared by one-pot spray pyrolysis, and are examined as anode materials for Na-ion batteries. During the spray pyrolysis process, metallic Se and Sn are prepared from SeO2 and SnO2, respectively, under a reducing atmosphere. Metallic Sn and metalloid Se, with melting points of 232 and 221 °C, respectively, form a melted Sn-Se mixture, which reacts exothermally to form SnSe nanocrystals. Several of these nanocrystals are grown simultaneously forming a micron-sized powder. Complete elimination of the excess amount of metalloid Se, by forming H2Se gas, results in aggregation-free SnSe nanoplates. The aspect ratio of these nanoplates is as high as 11.3. The discharge capacities for the SnSe nanoplates, prepared from spray solutions containing 100, 400, and 800% of the stoichiometric SeO2 content needed to form SnSe, are 407, 558, and 211 mA h g-1, respectively, after 50 cycles at a constant current density of 0.3 A g-1 their capacity retentions calculated from the second cycle onwards are 77, 100, and 60%, respectively. The phase pure SnSe nanoplates with a high aspect ratio show good cycling and rate performances for Na-ion storage. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr02983c

"A Step Above the Rest..." Specialized Middle Level Preparation.

ERIC Educational Resources Information Center

Giebelhaus, Carmen R.

Teachers who had received a specialized preparation for middle level teaching were studied to determine the effectiveness of such a preparation program and to help form a knowledge base from which teacher education institutions could document, design, and implement middle level preparation programs. The paper reviews the literature investigating…

Process for preparing tows from composite fiber blends

NASA Technical Reports Server (NTRS)

McMahon, Paul (Inventor); Chung, Tai-Shung (Inventor); Ying, Lincoln (Inventor)

1989-01-01

A continuous, substantially uniform tow useful in forming composite molded articles is prepared by forming a continuous tow of continuous carbon fibers, forming a continuous tow of thermoplastic polymer fibers to a selected width, uniformly and continuously spreading the carbon fiber two to a width that is essentially the same as the selected width for the thermoplastic polymer fiber tow, intermixing the tows intimately, uniformly and continuously, in a relatively tension-free state, and continuosuly withdrawing the intermixed tow.

Oromucosal film preparations: classification and characterization methods.

PubMed

Preis, Maren; Woertz, Christina; Kleinebudde, Peter; Breitkreutz, Jörg

2013-09-01

Recently, the regulatory authorities have enlarged the variety of 'oromucosal preparations' by buccal films and orodispersible films. Various film preparations have entered the market and pharmacopoeias. Due to the novelty of the official monographs, no standardized characterization methods and quality specifications are included. This review reports the methods of choice to characterize oromucosal film preparations with respect to biorelevant characterization and quality control. Commonly used dissolution tests for other dosage forms are not transferable for films in all cases. Alternatives and guidance on decision, which methods are favorable for film preparations are discussed. Furthermore, issues about requirements for film dosage forms are reflected. Oromucosal film preparations offer a wide spectrum of opportunities. There are a lot of suggestions in the literature on how to control the quality of these innovative products, but no standardized tests are available. Regulatory authorities need to define the standards and quality requirements more precisely.

Learning English Speaking through Mobile-Based Role-Plays: The Exploration of a Mobile English Language Learning App Called Engage

ERIC Educational Resources Information Center

Yang, Bowen; Zhou, Shijun; Ju, Weijie

2013-01-01

Engage is a new form of mobile application that connects students studying English with teachers in real-time via their smartphones. Students receive target language through preparation dialogues, and then apply it to a role-play with a teacher. The conceptualization and development of Engage follows the user-centred design approach; and the…

Comparing the Efficacy of an Engineered-Based System (College Livetext) with an Off-the-Shelf General Tool (Hyperstudio) for Developing Electronic Portfolios in Teacher Education

ERIC Educational Resources Information Center

Johnson-Leslie, Natalie A.

2009-01-01

In teacher education, electronic portfolios provide an authentic form of assessment documenting students' personal and professional growth. Using the engineered-based system, College LiveText, and an off-the-shelf general tool, HyperStudio, pre-service teachers constructed e-portfolios as part of their teacher preparation requirements. This case…

GRIP Experiment 2010

NASA Image and Video Library

2010-08-15

The NASA DC-8 airplane sits on the tarmac, Monday, Aug. 16, 2010, at Fort Lauderdale Hollywood International Airport in Fort Lauderdale, Fla. , as preparations continue for its part in the GRIP experiment. The Genesis and Rapid Intensification Processes (GRIP) experiment is a NASA Earth science field experiment in 2010 that is being conducted to better understand how tropical storms form and develop into major hurricanes. Photo Credit: (NASA/Paul E. Alers)

GRIP Experiment 2010

NASA Image and Video Library

2010-08-14

The NASA DC-8 airplane sits on the tarmac, Sunday, Aug. 15, 2010, at Fort Lauderdale International Airport in Fort Lauderdale, Fla. , as preparations continue for its part in the GRIP experiment. The Genesis and Rapid Intensification Processes (GRIP) experiment is a NASA Earth science field experiment in 2010 that is being conducted to better understand how tropical storms form and develop into major hurricanes. Photo Credit: (NASA/Paul E. Alers)

Project Canada West. The Factors Affecting the Structural Growth of a City.

ERIC Educational Resources Information Center

Western Curriculum Project on Canada Studies, Edmonton (Alberta).

This project examined the development of the physical structure of a city in preparation for the designing of a unit of study on Urbanization for grades five through twelve. The rationale is focused on the effect physical structure has on the processes and functions of urban life. Recognizing the need for a method or process to examine city forms,…

Designing and Using Virtual Field Environments to Enhance and Extend Field Experience in Professional Development Programs in Geology for K-12 Teachers

ERIC Educational Resources Information Center

Granshaw, Frank Douglas

2011-01-01

Virtual reality (VR) is increasingly used to acquaint geoscience novices with some of the observation, data gathering, and problem solving done in actual field situations by geoscientists. VR environments in a variety of forms are used to prepare students for doing geologic fieldwork, as well as to provide proxies for such experience when…

Reconceptualizing Curriculum Politics: A Case Study of an ESP Program for Vocational High School Students in Taiwan

ERIC Educational Resources Information Center

Lo, Yi-Hsuan Gloria

2017-01-01

A curriculum is a form of politics (Apple, 1993). The politics of a curriculum defines what is legitimate and valued and what is not. In Taiwan, the objectives of vocational high school (VHS) education are to prepare students to acquire relevant professional knowledge and practical skills and to integrate them into their future career development.…

Ultrapure glass optical waveguide: Development in microgravity by the sol gel process

NASA Technical Reports Server (NTRS)

Mukherjee, S. P.; Debsikdar, J. C.; Beam, T.

1983-01-01

The sol-gel process for the preparation of homogeneous gels in three binary oxide systems was investigated. The glass forming ability of certain compositions in the selected oxide systems (SiO-GeO2, GeO2-PbO, and SiO2-TiO2) were studied based on their potential importance in the design of optical waveguide at longer wavelengths.

Cannabinoid Receptors: A Novel Target for Therapy of Prostate Cancer

DTIC Science & Technology

2007-02-01

study could be to develop nonhabit-forming cannabi - noid agonist (s) for the management of prostate cancer . REFERENCES 1. Jemal, A., Siegel, R.W...for Therapy of Prostate Cancer PRINCIPAL INVESTIGATOR: Prof. Hasan Mukhtar, Ph.D (PI) Dr. Farrukh Afaq, Ph.D (Co-Investigator...REPORT DATE: February 2007 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and Materiel Command

Organoselenium-catalyzed, hydroxy-controlled regio- and stereoselective amination of terminal alkenes: efficient synthesis of 3-amino allylic alcohols.

PubMed

Deng, Zhimin; Wei, Jialiang; Liao, Lihao; Huang, Haiyan; Zhao, Xiaodan

2015-04-17

An efficient route to prepare 3-amino allylic alcohols in excellent regio- and stereoselectivity in the presence of bases by orangoselenium catalysis has been developed. In the absence of bases α,β-unsaturated aldehydes were formed in up to 97% yield. Control experiments reveal that the hydroxy group is crucial for the direct amination.

Reading in 3 Languages. La lectura en 3 idiomas. La lecture en langues. Manual Prepared for the Bilingual Demonstration Project, Title VII.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Office of Bilingual Education.

The manual contains forms, handouts, checklists, and other materials used in and developed by the Bilingual Screening and Reading Clinic Demonstration Project of New York City's Community School District 3. The materials are provided for teachers and administrators to use or modify for working with bilingual school populations in need of…

Evolution of a nursing education program delivered to baccalaureate-prepared Haitian nurses.

PubMed

Lev, Elise L; Lindgren, Teri G; Pearson, Gayle A; Alcindor, Hilda

2013-01-01

Haiti has high morbidity and mortality rates, a large proportion of people living in poverty, and a shortage of nurses and nursing faculty members. A partnership program between a US and Haitian university was formed to deliver a certificate program in nursing education. The authors describe their experiences developing, delivering, and evaluating the blended on-site and online program and their future goals.

Synthesis, characterization, and properties of low-dimensional nanostructured materials

NASA Astrophysics Data System (ADS)

Hu, Xianluo

2007-05-01

Nanometer scale structures represent an exciting and rapidly expanding area of research. Studies on new physical/chemical properties and applications of nanomaterials and nanostructures are possible only when nanostructured materials are made available with desired size, morphology, crystal and microstructure, and composition. Thus, controlled synthesis of nanomaterials is the essential aspect of nanotechnology. This thesis describes the development of simple and versatile solution-based approaches to synthesize low-dimensional nanostructures. The first major goal of this research is to design and fabricate morphology-controlled alpha-Fe 2O3 nanoarchitectures in aqueous solution through a programmed microwave-assisted hydrothermal route, taking advantage of microwave irradiation and hydrothermal effects. Free-standing alpha-Fe2O3 nanorings are prepared by hydrolysis of FeCl3 in the presence of phosphate ions. The as-formed architecture of alpha-Fe2O 3 nanorings is an exciting new member in the family of iron oxide nanostructures. Our preliminary results demonstrate that sensors made of the alpha-Fe 2O3 nanorings exhibit high sensitivity not only for bio-sensing of hydrogen peroxide in a physiological solution but also for gas-sensing of alcohol vapor at room temperature. Moreover, monodisperse alpha-Fe 2O3 nanocrystals with continuous aspect-ratio tuning and fine shape control are achieved by controlling the experimental conditions. The as-formed alpha-Fe2O3 exhibits shape-dependent infrared optical properties. The growth process of colloidal alpha-Fe 2O3 crystals in the presence of phosphate ions is discussed. In addition, through an efficient microwave-assisted hydrothermal process, self-assembled hierarchical alpha-Fe2O3 nanoarchitectures are synthesized on a large scale. The second major goal of this research is to develop convenient microwave-hydrothermal approaches for the fabrication of carbon-based nanocomposites: (1) A one-pot solution-phase route, namely microwave-assisted hydrothermal reduction/carbonization (MAHRC), is developed to prepare coaxial Ag/amorphous-carbon (a-C) nanocables. The as-grown Ag/C nanocables can self-assemble in an end-to-end fashion. (2) A novel Se/C nanocomposite with core-shell structures is prepared. The new material consists of a trigonal-Se (t-Se) core and an amorphous-C (a-C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. (3) A Fe 3O4/C nanocomposite is synthesized by a green wet-chemical approach. The product possesses porous microstructures and exhibits superparamagnetic behavior. The third major goal of this research is develop facile solution-based methods for preparing carbonaceous nano test tubes, thin films of metal iodides, and spherical selenium spheres: (1) Carbonaceous nano test tubes are fabricated by a facile "decoring" route using a core-sheath Te carbon nanocomposite as the precursor. The as-formed carbonaceous material looks like a "test tube" with an average diameter of about 120 nm and lengths up to 5 mum. (2) Tetrahedral-shaped CuI crystals were formed on a variety of copper substrates (e.g. grids, flat/porous foils, and macro-/nano- wires) via an interfacial reaction between a copper substrate and iodine in water at room temperature. This preparation approach can also be used to grow PbI2 and AgI nano- and micro-crystals with different morphologies on corresponding substrates. (3) Colloidal trigonal selenium (t-Se) microspheres are synthesized through a mild hydrothermal reduction reaction, using glucose as a reducing regent and water as an environmentally friendly solvent. Importantly, the resulting t-Se microspheres inherit functional groups from the starting materials and possess hydrophilic and biocompatible surfaces.

Method of preparing thermal insulation for high temperature microwave sintering operations

DOEpatents

Holcombe, C.E.; Dykes, N.L.; Morrow, M.S.

1996-07-16

Superior microwave transparent thermal insulations for high temperature microwave sintering operations were prepared. One embodiment of the thermal insulation comprises granules of boron nitride coated with a very thin layer of glassy carbon made by preparing a glassy carbon precursor and blending it with boron nitride powder to form a mixture. The blended mixture is granulated to form a grit which is dried and heated to form the granules of boron nitride coated with a glassy carbon. Alternatively, grains of glassy carbon are coated with boron nitride by blending a mixture of a slurry comprising boron nitride, boric acid binder, and methyl alcohol with glassy carbon grains to form a blended mixture. The blended mixture is dried to form grains of glassy carbon coated with boron nitride. In addition, a physical mixture of boron nitride powder and glassy carbon grains has also been shown to be an excellent thermal insulation material for microwave processing and sintering. 1 fig.

Determination of Verapamil HCl in Pharmaceutical Preparations by a Fluorescent Nano Probe Based on CdTe/CdS/ZnS Quantum Dots

PubMed Central

Muhammad, Sohail; Xu, Guanhong; Wei, Fangdi; Ma, Yujie; Ma, Yunsu; Song, Yueyue; Shi, Menglan; Xu, Xiaoman; Cen, Yao; Hu, Qin

2017-01-01

An analytical technique based on fluorescence quenching of CdTe/CdS/ZnS quantum dots (QDs) was developed to quantify verapamil in commercially available preparations. Various reaction parameters were optimized and the method developed was validated. One way analysis of variance (ANOVA) and post hoc tests at a 5% significance level were performed to justify the significance of the variation in observations. The linear range of the verapamil concentration was 0.25–5 µg/mL while the limit of detection was 20 µg/mL. Recovery and relative standard deviations were not more than ±10% of the actual amount and <5.9%, respectively. Foreign materials, common metal ions and pharmaceutical excipients of dosage forms caused little interference. To verify the application of the analytical method, the quantity of verapamil in commercially available dosage forms was measured. Verapamil content in the tablets and injections was not more than ±10% of the stated amount and it conformed to the specifications of both the British and the United States pharmacopoeias. In the case of statistical analysis, p-value was <0.05 in almost all levels of all parameters except for the optimized level of system. It can be concluded from the results that the designed method is simple, reliable, cost effective, selective, rapid and sensitive enough to be used for quantitative measurement of the verapamil HCl in dosage forms for quality control purposes. PMID:29084166

An Investigation of the Knowledge, Beliefs, and Practices of Physics Teaching Assistants, with Implications for TA Preparation

NASA Astrophysics Data System (ADS)

Spike, Benjamin T.

Physics Teaching Assistants (TAs) serve a critical role in supporting student learning in various classroom environments, including discussions and laboratories. As research-based instructional strategies become more widespread in these settings, the TA's role is expanding beyond simply presenting physics content to encompass facilitating student discussion and attending to student reasoning. At the same time, we recognize that these TAs are physics professionals and future faculty, and their teaching experiences in graduate school have the potential for long-term impact on their professional identities. Consequently, there is a need to enhance traditional forms of preparation to support TAs in this expanded role in ways that complement broader professional development opportunities. Enhancing TA preparation requires understanding how TAs make sense of their roles as instructors so that we may identify potential avenues for intervention that support the development of practices that are (1) supportive of curricular goals and (2) consistent with the TAs' overall pedagogical model. The intent of this thesis is to develop a single overarching framework for analyzing how TAs talk about and carry out their roles as instructors. We then apply this framework to a set of interview and video data from multiple semesters, and make claims regarding instances of coordination and dis-coordination between TAs' beliefs and practices. Furthermore, we are able to track changes in beliefs and practices along various time scales. Finally, we return to the issue of TA preparation by identifying features of enhanced professional and pedagogical development, drawn from results of these studies, that could operate within existing institutional structures.

Assessment of heterogeneity in types of vegetables served by main household food preparers and food decision influencers.

PubMed

Yi, Sunghwan; Kanetkar, Vinay; Brauer, Paula

2015-10-01

While vegetables are often studied as one food group, global measures may mask variation in the types and forms of vegetables preferred by different individuals. To explore preferences for and perceptions of vegetables, we assessed main food preparers based on their preparation of eight specific vegetables and mushrooms. An online self-report survey. Ontario, Canada. Measures included perceived benefits and obstacles of vegetables, convenience orientation and variety seeking in meal preparation. Of the 4517 randomly selected consumers who received the invitation, 1013 responded to the survey (22·4 % response). Data from the main food preparers were analysed (n 756). Latent profile analysis indicated three segments of food preparers. More open to new recipes, the 'crucifer lover' segment (13 %) prepared and consumed substantially more Brussels sprouts, broccoli and asparagus than the other segments. Although similar to the 'average consumer' segment (54 %) in many ways, the 'frozen vegetable user' segment (33 %) used significantly more frozen vegetables than the other segments due to higher prioritization of time and convenience in meal preparation and stronger 'healthy=not tasty' perception. Perception of specific vegetables on taste, healthiness, ease of preparation and cost varied significantly across the three consumer segments. Crucifer lovers also differed with respect to shopping and cooking habits compared with the frozen vegetable users. The substantial heterogeneity in the types of vegetables consumed and perceptions across the three consumer segments has implications for the development of new approaches to promoting these foods.

Development of [3H]2-Carboxy-4,6-dichloro-1H-indole-3-propionic Acid ([3H]PSB-12150): A Useful Tool for Studying GPR17

PubMed Central

2014-01-01

The recently described synthetic GPR17 agonist 2-carboxy-4,6-dichloro-1H-indole-3-propionic acid (1) was prepared in tritium-labeled form by catalytic hydrogenation of the corresponding propenoic acid derivative 8 with tritium gas. The radioligand [3H]PSB-12150 (9) was obtained with a specific activity of 17 Ci/mmol (629 GBq/mmol). It showed specific and saturable binding to a single binding site in membrane preparations from Chinese hamster ovary cells recombinantly expressing the human GPR17. A competition assay procedure was established, which allows the determination of ligand binding affinities. PMID:24900835

Development of [(3)H]2-Carboxy-4,6-dichloro-1H-indole-3-propionic Acid ([(3)H]PSB-12150): A Useful Tool for Studying GPR17.

PubMed

Köse, Meryem; Ritter, Kirsten; Thiemke, Katharina; Gillard, Michel; Kostenis, Evi; Müller, Christa E

2014-04-10

The recently described synthetic GPR17 agonist 2-carboxy-4,6-dichloro-1H-indole-3-propionic acid (1) was prepared in tritium-labeled form by catalytic hydrogenation of the corresponding propenoic acid derivative 8 with tritium gas. The radioligand [(3)H]PSB-12150 (9) was obtained with a specific activity of 17 Ci/mmol (629 GBq/mmol). It showed specific and saturable binding to a single binding site in membrane preparations from Chinese hamster ovary cells recombinantly expressing the human GPR17. A competition assay procedure was established, which allows the determination of ligand binding affinities.

Recovery of Uranium from Seawater: Preparation and Development of Polymer-Supported Extractants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spiro, Alexandratos

2013-12-01

A new series of polymer-supported extractants is proposed for the removal and recovery of uranium from seawater. The objective is to produce polymers with improved stability, loading capacity, and sorption kinetics compared to what is found with amidoximes. The target ligands are diphosphonates and aminomethyldiphosphonates. Small molecule analogues, especially of aminomethyldiphos-phonates, have exceptionally high stability constants for the uranyl ion. The polymeric diphosphonates will have high affinities due to their ability to form six-membered rings with the uranyl ion while the aminomethyldiphosphonates may have yet higher affinities due to possible tridentate coordination and their greater acidity. A representative set ofmore » the polymers to be prepared are indicated.« less

RAPID COMMUNICATION: Large-area uniform ultrahigh-Jc YBa2Cu3O7-x film fabricated by the metalorganic deposition method using trifluoroacetates

NASA Astrophysics Data System (ADS)

Araki, Takeshi; Yamagiwa, Katsuya; Hirabayashi, Izumi; Suzuki, Katsumi; Tanaka, Shoji

2001-07-01

Ultrahigh-Jc YBa2Cu3O7-x (YBCO) films have been successfully fabricated by the metalorganic deposition method using a trifluoroacetate coating solution which is prepared by a newly developed purification technique, the solvent-into-gel (SIG) method. The prepared pure coating solution has less than 0.25% impurities and has a wide flexibility in process conditions to obtain high-Jc YBCO film. Using this feature, we have successfully formed 50 mm diameter YBCO films, which have a critical current density over 10 MA cm-2 (77 K, 0 T) on LaAlO3 single crystalline substrates.

IN-VITRO CHARACTERIZATION OF GASTRORETENTIVE MICROBALLOONS PREPARED BY THE EMULSION SOLVENT DIFFUSION METHOD

PubMed Central

Yadav, Akash; Jain, Dinesh Kumar

2010-01-01

Microballoons floatable on JPXIII No.1 solution were developed as a dosage form capable of floating in the stomach. Microballoons were prepared by the emulsion solvent diffusion method using enteric acrylic and other polymers with drug in a mixture of dichloromethane and ethanol. It was found that preparation temperature determined the formation of cavity inside the microsphere and the surface smoothness, determining the floatability and the drug release rate of the microballoons. The correlation between the buoyancy of microballoons and their physical properties, e.g. apparent density and roundness of microballoons were elucidated. The drug loading efficiency of microballoons was also determined. The optimum loading amount of metformin in the microballoons was found to impart ideal floatable properties to the microballoons. By fitting the data into zero order, first order and Highuchi model it was concluded that the release followed zero order release. PMID:22247832

Photosensitized degradation of losartan potassium in an extemporaneous suspension formulation.

PubMed

Seburg, Randal A; Ballard, John M; Hwang, Tsang-Lin; Sullivan, Caitlin M

2006-10-11

During development of an extemporaneous suspension formulation for losartan potassium, previously unknown degradation products were observed in experimental suspensions prepared in a commercial cherry syrup vehicle. These degradates increased rapidly when analytical solutions prepared from that suspension were exposed to ambient light. The structures of the degradates were determined using a combination of preparative HPLC, LC/MS, (13)C and (1)H NMR (1D and 2D), and mechanistic chemistry. Each degradate results from destruction of the imidazole ring of losartan. Formation of the two major degradates required exposure to light (UV or visible) and the presence of oxygen. Experiments using Rose Bengal (a singlet oxygen photosensitizer) and 1,4-diazabicyclooctane (DABCO; a singlet oxygen quencher) established that the major photodegradates are formed via the intermediacy of singlet oxygen. The identity of the photosensitizer in the formulation was not unequivocally determined; however, the experiments implicated the artificial flavoring in fulfilling this role.

Removal of Antibiotics From Water with an All-Carbon 3D Nanofiltration Membrane

NASA Astrophysics Data System (ADS)

Yang, Guo-hai; Bao, Dan-dan; Zhang, Da-qing; Wang, Cheng; Qu, Lu-lu; Li, Hai-tao

2018-05-01

Recent industrial developments and increased energy demand have resulted in significantly increased levels of environmental pollutants, which have become a serious global problem. Herein, we propose a novel all-carbon nanofiltration (NF) membrane that consists of multi-walled carbon nanotubes (MWCNTs) interposed between graphene oxide (GO) nanosheets to form a three-dimensional (3D) structure. The as-prepared membrane has abundant two-dimensional (2D) nanochannels that can physically sieve antibiotic molecules through electrostatic interaction. As a result, the prepared membrane, with a thickness of 4.26 μm, shows both a high adsorption of 99.23% for tetracycline hydrochloride (TCH) and a high water permeation of 16.12 L m- 2 h- 1 bar- 1. In addition, the cationic dye methylene blue (MB) was also removed to an extent of 83.88%, indicating broad applications of the prepared membrane.

Dynamic mechanical thermal analysis of hypromellose 2910 free films.

PubMed

Cespi, Marco; Bonacucina, Giulia; Mencarelli, Giovanna; Casettari, Luca; Palmieri, Giovanni Filippo

2011-10-01

It is common practice to coat oral solid dosage forms with polymeric materials for controlled release purposes or for practical and aesthetic reasons. Good knowledge of thermo-mechanical film properties or their variation as a function of polymer grade, type and amount of additives or preparation method is of prime importance in developing solid dosage forms. This work focused on the dynamic mechanical thermal characteristics of free films of hypromellose 2910 (also known as HPMC), prepared using three grades of this polymer from two different manufacturers, in order to assess whether polymer chain length or origin affects the mechanical or thermo-mechanical properties of the final films. Hypromellose free films were obtained by casting their aqueous solutions prepared at a specific concentrations in order to obtain the same viscosity for each. The films were stored at room temperature until dried and then examined using a dynamic mechanical analyser. The results of the frequency scans showed no significant differences in the mechanical moduli E' and E″ of the different samples when analysed at room temperature; however, the grade of the polymer affected material transitions during the heating process. Glass transition temperature, apparent activation energy and fragility parameters depended on polymer chain length, while the material brand showed little impact on film performance. Copyright © 2011 Elsevier B.V. All rights reserved.

A novel solubility-modulated granules through porosity osmotic pump for controlled carvedilol delivery.

PubMed

Song, Qun-Li; Li, Ping; Li, Yu-Min

2012-01-01

A method for the preparation of porosity osmotic pump granules was obtained by modulating carvedilol solubility with tartaric acid. Controlled porosity of the membrane was accomplished by the use of pore-forming agent in the coating. In this study, carvedilol was chosen as a model drug with an aim to develop a zero-order release system; tartaric acid was used as the solubility promoter; NaCl was used as the osmotic agent; cellulose acetate (CA) was used as the materials of semipermeable membrane; and PEG-400 was used as the pore-forming agent in the semipermeable membrane. The influence of different factors or levels on the in vitro release was studied. In order to simulate the gastrointestinal tract environments, two kinds of pH media (pH 1.5 and 6.8) on drug release were studied in this research, respectively. This porosity osmotic pump was optimized by single factor design experiments, and it was found to deliver carvedilol at a zero-order rate within 12 h and controlled release for 24 h. We drew a conclusion that the solubility-modulated porosity osmotic pump system is simple to prepare and might be used for the preparation of osmotic pump system of other poorly water-soluble drugs with alkaline or acid groups.

Process parameters and morphology in puerarin, phospholipids and their complex microparticles generation by supercritical antisolvent precipitation.

PubMed

Li, Ying; Yang, Da-Jian; Chen, Shi-Lin; Chen, Si-Bao; Chan, Albert Sun-Chi

2008-07-09

The aim of the study was to develop and evaluate a new method for the production of puerarin phospholipids complex (PPC) microparticles. The advanced particle formation method, solution enhanced dispersion by supercritical fluids (SEDS), was used for the preparation of puerarin (Pur), phospholipids (PC) and their complex particles for the first time. Evaluation of the processing variables on PPC particle characteristics was also conducted. The processing variables included temperature, pressure, solution concentration, the flow rate of supercritical carbon dioxide (SC-CO2) and the relative flow rate of drug solution to CO2. The morphology, particle size and size distribution of the particles were determined. Meanwhile Pur and phospholipids were separately prepared by gas antisolvent precipitation (GAS) method and solid characterization of particles by the two supercritical methods was also compared. Pur formed by GAS was more orderly, purer crystal, whereas amorphous Pur particles between 0.5 and 1microm were formed by SEDS. The complex was successfully obtained by SEDS exhibiting amorphous, partially agglomerated spheres comprised of particles sized only about 1microm. SEDS method may be useful for the processing of other pharmaceutical preparations besides phospholipids complex particles. Furthermore adopting a GAS process to recrystallize pharmaceuticals will provide a highly versatile methodology to generate new polymorphs of drugs in addition to conventional techniques.

Itraconazole solid dispersion prepared by a supercritical fluid technique: preparation, in vitro characterization, and bioavailability in beagle dogs.

PubMed

Yin, Xuezhi; Daintree, Linda Sharon; Ding, Sheng; Ledger, Daniel Mark; Wang, Bing; Zhao, Wenwen; Qi, Jianping; Wu, Wei; Han, Jiansheng

2015-01-01

This research aimed to develop a supercritical fluid (SCF) technique for preparing a particulate form of itraconazole (ITZ) with good dissolution and bioavailability characteristics. The ITZ particulate solid dispersion was formulated with hydroxypropyl methylcellulose, Pluronic F-127, and L-ascorbic acid. Aggregated particles showed porous structure when examined by scanning electron microscopy. Powder X-ray diffraction and Fourier transform infrared spectra indicated an interaction between ITZ and excipients and showed that ITZ existed in an amorphous state in the composite solid dispersion particles. The solid dispersion obtained by the SCF process improved the dissolution of ITZ in media of pH 1.0, pH 4.5, and pH 6.8, compared with a commercial product (Sporanox(®)), which could be ascribed to the porous aggregated particle shape and amorphous solid state of ITZ. While the solid dispersion did not show a statistical improvement (P=0.50) in terms of oral bioavailability of ITZ compared with Sporanox(®), the C max (the maximum plasma concentration of ITZ in a pharmacokinetic curve) of ITZ was raised significantly (P=0.03) after oral administration. Thus, the SCF process has been shown to be an efficient, single step process to form ITZ-containing solid dispersion particles with good dissolution and oral bioavailability characteristics.

A COMPARISON OF THE ACTION OF PLASMA AND SERUM ON CERTAIN OBJECTS USED IN BIOLOGICAL TESTS FOR EPINEPHRIN

PubMed Central

Stewart, G. N.; Zucker, T. F.

1913-01-01

Apparently, then, we are confronted with this result,—that citrate plasma which causes little or no constriction of the stretched artery ring, little or no slowing of the flow through the frog perfusion preparation, while the corresponding serum produces a marked effect on both preparations, will affect the intestine or uterus preparation practically in the same way as the corresponding serum. Hirudin plasma and serum exert on the intestine and uterus preparations practically the same effect, causing a marked increase of tone. On the artery ring preparation, there is a difference although it is not so strongly marked as in the case of the citrate material. The frog perfusion preparation, as regards the effect of the hirudin material, seems to occupy an intermediate position between the intestine and uterus on the one hand, and the artery ring on the other. Of the three plasmas, the peptone plasma most closely resembles serum in its action on the artery rings. Like the other plasmas its effect on the intestine and uterus does not differ appreciably from that of the serum. From these observations the following conclusions seem justified. A change occurs in shed blood which confers on it the property of constricting artery rings and of slowing the flow through the perfused frog preparation. If this property is in any degree possessed by circulating blood it is at least markedly increased after the blood is shed. The change, whatever it may be, does not entail any essential alteration in the action of the blood on intestine and uterus segments. The tone-increasing property developed in the shed blood may, therefore, so far as the four test objects included in the present survey are concerned, be looked upon as especially affecting the blood vessels and probably their smooth muscle directly. This need not imply that the pressor substance, if it is a single definite substance developed in the shed blood, exerts no action on the smooth muscle of the intestine and uterus preparations, but merely that its action on these objects is masked by the general action of the serum and plasma, so that in the presence of the other constituents common to serum and plasma, its effect is inconspicuous or not to be detected at all, while on the blood vessel preparations, especially the artery rings, the effect of the pressor substance is the dominant one, and the general action of the serum and plasma is feeble or undetectable. It is not the clotting process as such, i.e., the actual change of fibrinogen into fibrin, that is responsible for the differences between serum and plasma revealed by the biological tests employed but some process which precedes or accompanies the clotting and which may or may not be causally related to it. Changes in formed elements of the blood under the influence of the changed conditions (contact with foreign bodies, restriction of gaseous exchange, etc.). which blood encounters as soon as it leaves the living vessels, are known to occur. Among these it is to be assumed are the changes which condition the differences between plasma and serum under discussion.16 Even if these changes represent preliminary stages in coagulation (liberation of the factors necessary to the formation of thrombin, for instance), they may still occur to a greater or less extent in blood which is prevented in certain ways from clotting since it is known that the procedures by which the various non-coagulable plasmas are obtained break at different points the chain of events which normally ends in coagulation. A procedure which simply supplies sufficient antithrombin to neutralize the thrombin which has been allowed to form in normal amount may not interfere at all with the changes in the formed elements, and the pressor property of the resulting plasma may then be as marked as that of the serum. On the other hand, a procedure which binders clotting by preventing or diminishing the alterations in the cells, for example, the addition of a substance which acts as a preservative for blood platelets, will very likely yield a plasma with little or no pressor effect in comparison with the serum. The mere prevention of clotting, then, except in so far as it is an index of the prevention of changes in the formed elements may have little significance in preventing the development of the pressor property. Indeed it is conceivable that the alterations in the cells which are connected with the development of this property may even be wholly or partially independent of the cell changes concerned in coagulation. In this case it might be possible to obtain blood which would clot without developing the pressor property. The main results which seem to follow from our observations may be thus summarized: 1. The substance, or property, developed in shed blood by which it causes constriction of artery rings, is not developed, or at least not mainly developed, in connection with the actual change of fibrinogen to fibrin, since the constrictor action of different plasmas differs greatly, while the absence of coagulation is common to all. 2. The development of the constrictor substance, or property, is associated with changes undergone probably by formed elements of the blood when it is shed. These changes may be identical with the alterations, or with some of the alterations, preliminary to clotting. It is possible, however, that there may be changes connected with the development of the pressor property which, although concomitant with the liberation of the substances concerned in the production of thrombin, are yet quite independent of the clotting process. Our observations do not enable us to decide definitely between these possibilities. 3. The constrictor substance, or property, developed in shed blood acts especially on blood vessels and does not equally affect the other organs examined. This follows from the fact that a plasma and serum which differ markedly in their action on the blood vessels may have practically the same action on the intestine or uterus segments, an action which must therefore reside mainly, at least, in the original plasma itself. 4. The indication that the serum acts especially on blood vessels increases the interest of the suggestion that this action may play an important part in the prompt sealing of wounded vessels in addition to the mechanical effect of the clot, or by coming into operation before the clot has fully formed. PMID:19867632

Skynet Junior Scholars: From Idea to Enactment--Tales from the Trenches I. Implementation in 4-H settings.

NASA Astrophysics Data System (ADS)

Burnside, Jason; Feldman, Lynn; Gurton, Suzanne; Heatherly, Sue Ann; Hoette, Vivian L.; Murray, Jenny; Zastrow, Ginger

2016-01-01

The creators of Skynet Junior Scholars were ambitious to say the least when they set out to:- Develop online tools that enable middle school and high school aged youth to use robotic optical and radio telescopes to do astronomy- Create an inquiry-based curriculum that promotes critical thinking and scientific habits of mind- Proactively incorporate Principles of Universal Design in all SJS development tasks to ensure access by blind/low vision and deaf/hard of hearing youth- Prepare 180 adult youth leaders from diverse backgrounds including museum educators, amateur astronomers, teachers 4-H leaders to facilitate SJS activities in a variety of settings.After 3 years of development SJS is in full implementation mode. As of August, 2015, 105 youth leaders and leader supervisors from 24 states have completed professional development and many have formed SJS youth groups. In this paper we describe what it takes for a successful implementation of Skynet Junior Scholars in a 4-H setting, from the viewpoint of adult leaders in the trenches who have created novel implementation models to make SJS work in diverse environments from monthly 4-H meetings to immersive residential camps.4-H is the nation's largest positive youth development organization, with a membership of more than six million young people in the U.S. In 2003 the national organization formed a strong commitment to STEM education with the goal to "to engage one million new youth in a dynamic process of discovery and exploration in science, engineering and technology to prepare them to meet the challenges of the 21st century". Skynet Junior Scholars has formed a strong and growing partnership with state 4-H agencies in West Virginia and Wisconsin, with a goal of establishing SJS as a national 4-H curriculum.Skynet Junior Scholars is supported by the National Science Foundation under Grant Numbers 1223687, 1223235 and 1223345.

Method of forming particulate materials for thin-film solar cells

DOEpatents

Eberspacher, Chris; Pauls, Karen Lea

2004-11-23

A method for preparing particulate materials useful in fabricating thin-film solar cells is disclosed. Particulate materials is prepared by the method include for example materials comprising copper and indium and/or gallium in the form of single-phase, mixed-metal oxide particulates; multi-phase, mixed-metal particulates comprising a metal oxide; and multinary metal particulates.

A new route to prepare multiresponsive organogels from a block ionomer via charge-driven assembly.

PubMed

Zhang, Tao; Guo, Qipeng

2013-06-04

We report a novel route to prepare multiresponsive organogels through charge-driven assembly between a block ionomer and a diblock copolymer. The ionic complex aggregates to form spherical cores, which are connected by the middle block of the block ionomer to form gels. The organogels are responsive to acids, amines and salts.

Experimental Procedure for Warm Spinning of Cast Aluminum Components.

PubMed

Roy, Matthew J; Maijer, Daan M

2017-02-01

High performance, cast aluminum automotive wheels are increasingly being incrementally formed via flow forming/metal spinning at elevated temperatures to improve material properties. With a wide array of processing parameters which can affect both the shape attained and resulting material properties, this type of processing is notoriously difficult to commission. A simplified, light-duty version of the process has been designed and implemented for full-size automotive wheels. The apparatus is intended to assist in understanding the deformation mechanisms and the material response to this type of processing. An experimental protocol has been developed to prepare for, and subsequently perform forming trials and is described for as-cast A356 wheel blanks. The thermal profile attained, along with instrumentation details are provided. Similitude with full-scale forming operations which impart significantly more deformation at faster rates is discussed.

Experimental Procedure for Warm Spinning of Cast Aluminum Components

PubMed Central

Roy, Matthew J.; Maijer, Daan M.

2017-01-01

High performance, cast aluminum automotive wheels are increasingly being incrementally formed via flow forming/metal spinning at elevated temperatures to improve material properties. With a wide array of processing parameters which can affect both the shape attained and resulting material properties, this type of processing is notoriously difficult to commission. A simplified, light-duty version of the process has been designed and implemented for full-size automotive wheels. The apparatus is intended to assist in understanding the deformation mechanisms and the material response to this type of processing. An experimental protocol has been developed to prepare for, and subsequently perform forming trials and is described for as-cast A356 wheel blanks. The thermal profile attained, along with instrumentation details are provided. Similitude with full-scale forming operations which impart significantly more deformation at faster rates is discussed. PMID:28190063

Mental imagery and learning: a qualitative study in orthopaedic trauma surgery.

PubMed

Ibrahim, Edward F; Richardson, Martin D; Nestel, Debra

2015-09-01

Good preparation for surgical procedures has been linked to better performance and enhanced learning in the operating theatre. Mental imagery is increasingly used to enhance performance in competitive sport and there has been recent interest in applying this in surgery. This study aims to identify the mental imagery components of preoperative preparation in orthopaedic trauma surgery and to locate these practices in existing socio-material theory in order to produce a model useful for surgical skills training. Semi-structured interviews were conducted with nine orthopaedic surgeons. Participants were identified by personal recommendation as regularly performing complex trauma operations to a high standard, and by affiliation to an international instruction course in trauma surgery. Interviews were audio-recorded and transcripts were independently analysed using thematic analysis. Analysis revealed that surgeons interact intensively with multiple colleagues and materials during their preparatory activities. Such interactions stimulate mental imagery in order to build strategy and rehearse procedures, which, in turn, stimulate preparatory interactions. Participants identified the discussion of a preoperative 'plan' as a key engagement tool for training junior surgeons and as a form of currency by which a trainee may increase his or her participation in a procedure. Preoperative preparation can be thought of as a socio-material ontology requiring a surgeon to negotiate imaginal, verbal and physical interactions with people, materials and his or her own mental imagery. Actor-network theory is useful for making sense of these interactions and for allowing surgeons to interrogate their own preparative processes. We recommend supervisors to use a form of preoperative plan as a teaching tool and to encourage trainees to develop their own preparatory skills. The ability of a trainee to demonstrate sound preparation is an indicator of readiness to perform a procedure. © 2015 John Wiley & Sons Ltd.

Assessment of Dextran Antigenicity of Intravenous Iron Preparations with Enzyme-Linked Immunosorbent Assay (ELISA).

PubMed

Neiser, Susann; Koskenkorva, Taija S; Schwarz, Katrin; Wilhelm, Maria; Burckhardt, Susanna

2016-07-21

Intravenous iron preparations are typically classified as non-dextran-based or dextran/dextran-based complexes. The carbohydrate shell for each of these preparations is unique and is key in determining the various physicochemical properties, the metabolic pathway, and the immunogenicity of the iron-carbohydrate complex. As intravenous dextran can cause severe, antibody-mediated dextran-induced anaphylactic reactions (DIAR), the purpose of this study was to explore the potential of various intravenous iron preparations, non-dextran-based or dextran/dextran-based, to induce these reactions. An IgG-isotype mouse monoclonal anti-dextran antibody (5E7H3) and an enzyme-linked immunosorbent assay (ELISA) were developed to investigate the dextran antigenicity of low molecular weight iron dextran, ferumoxytol, iron isomaltoside 1000, ferric gluconate, iron sucrose and ferric carboxymaltose, as well as isomaltoside 1000, the isolated carbohydrate component of iron isomaltoside 1000. Low molecular weight iron dextran, as well as dextran-based ferumoxytol and iron isomaltoside 1000, reacted with 5E7H3, whereas ferric carboxymaltose, iron sucrose, sodium ferric gluconate, and isolated isomaltoside 1000 did not. Consistent results were obtained with reverse single radial immunodiffusion assay. The results strongly support the hypothesis that, while the carbohydrate alone (isomaltoside 1000) does not form immune complexes with anti-dextran antibodies, iron isomaltoside 1000 complex reacts with anti-dextran antibodies by forming multivalent immune complexes. Moreover, non-dextran based preparations, such as iron sucrose and ferric carboxymaltose, do not react with anti-dextran antibodies. This assay allows to assess the theoretical possibility of a substance to induce antibody-mediated DIARs. Nevertheless, as this is only one possible mechanism that may cause a hypersensitivity reaction, a broader set of assays will be required to get an understanding of the mechanisms that may lead to intravenous iron-induced hypersensitivity reactions.

Effect of different polysorbates on development of self-microemulsifying drug delivery systems using medium chain lipids.

PubMed

Shah, Ankita; Thool, Prajwal; Sorathiya, Komal; Prajapati, Hetal; Dalrymple, Damon; Serajuddin, Abu T M

2018-02-01

The primary objective of this study was to develop lipid-based self-microemulsifying drug delivery systems (SMEDDS) without using any organic cosolvents that would spontaneously form microemulsions upon dilution with water. Cosolvents were avoided to prevent possible precipitation of drug upon dilution and other stability issues. Different polysorbates, namely, Tween 20, Tween 40, Tween 60, and Tween 80, were used as surfactants, and Captex 355 EP/NF (glycerol tricaprylate/caprate) or its 1:1 mixture with Capmul MCM NF (glycerol monocaprylocaprate) were used as lipids. Captex 355-Tween-water ternary phase diagrams showed that oil-in-water microemulsions were formed only when the surfactant content was high (80-90%) and the lipid content low (10-20%). Thus, mixtures of Tweens with Captex 355 alone were not suitable to prepare SMEDDS with substantial lipid contents. However, when Captex 355 was replaced with the 1:1 mixture of Captex 355 and Capmul MCM, clear isotropic microemulsion regions in phase diagrams with sizes in the increasing order of Tween 20 < Tween 40 < Tween 60 < Tween 80 were obtained. Tween 80 had the most profound effect among all surfactants as microemulsions were formed with lipid to surfactant ratios as high as 7:3, which may be attributed to the presence of double bond in its side chain that increased the curvature of surfactant layer. Thus, lipid-surfactant mixtures containing 1:1 mixture of medium chain triglyceride (Captex 355) and monoglyceride (Capmul MCM) and as low as 30% Tween 80 were identified as organic cosolvent-free systems for the preparation of SMEDDS. Formulations with a model drug, probucol, dispersed spontaneously and rapidly upon dilution with water to form microemulsions without any drug precipitation.

The heat-compression technique for the conversion of platelet-rich fibrin preparation to a barrier membrane with a reduced rate of biodegradation.

PubMed

Kawase, Tomoyuki; Kamiya, Mana; Kobayashi, Mito; Tanaka, Takaaki; Okuda, Kazuhiro; Wolff, Larry F; Yoshie, Hiromasa

2015-05-01

Platelet-rich fibrin (PRF) was developed as an advanced form of platelet-rich plasma to eliminate xenofactors, such as bovine thrombin, and it is mainly used as a source of growth factor for tissue regeneration. Furthermore, although a minor application, PRF in a compressed membrane-like form has also been used as a substitute for commercially available barrier membranes in guided-tissue regeneration (GTR) treatment. However, the PRF membrane is resorbed within 2 weeks or less at implantation sites; therefore, it can barely maintain sufficient space for bone regeneration. In this study, we developed and optimized a heat-compression technique and tested the feasibility of the resulting PRF membrane. Freshly prepared human PRF was first compressed with dry gauze and subsequently with a hot iron. Biodegradability was microscopically examined in vitro by treatment with plasmin at 37°C or in vivo by subcutaneous implantation in nude mice. Compared with the control gauze-compressed PRF, the heat-compressed PRF appeared plasmin-resistant and remained stable for longer than 10 days in vitro. Additionally, in animal implantation studies, the heat-compressed PRF was observed at least for 3 weeks postimplantation in vivo whereas the control PRF was completely resorbed within 2 weeks. Therefore, these findings suggest that the heat-compression technique reduces the rate of biodegradation of the PRF membrane without sacrificing its biocompatibility and that the heat-compressed PRF membrane easily could be prepared at chair-side and applied as a barrier membrane in the GTR treatment. © 2014 Wiley Periodicals, Inc.

[Improvement and prediction of intestinal drug absorption].

PubMed

Miyake, Masateru

2013-01-01

The suppository preparation, which can improve the absorption of poorly absorbable drugs safer than commercially available suppositories, was developed by utilizing sodium laurate and taurine. Additionally, the novel oral absorption-improving system was also established by utilizing polyamines and bile acids. Furthermore, to evaluate the efficacy of these new formulations and estimate the absorbability of new drug candidates in humans, the in vitro prediction system utilizing an isolated human intestinal tissues was developed and successfully predicted the fraction of dose absorbed for several model drugs. These findings would contribute to the development of new dosage forms and new drugs for oral administration.

Basics of Sterile Compounding: Ophthalmic Preparations, Part 2: Suspensions and Ointments.

PubMed

Allen, Loyd V

2016-01-01

Ophthalmic preparations are used to treat allergies, bacterial and viral infections, glaucoma, and numerous other eye conditions. When the eye's natural defensive mechanisms are compromised or overcome, an ophthalmic preparation, in a solution, suspension, or ointment form, may be indicated, with solutions being the most common form used to deliver a drug to the eye. This article discusses ophthalmic suspensions and ointments and represents part 2 of a 2-part article, the first of which discussed ophthalmic solutions. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Development and Validation of Chemometric Spectrophotometric Methods for Simultaneous Determination of Simvastatin and Nicotinic Acid in Binary Combinations.

PubMed

Alahmad, Shoeb; Elfatatry, Hamed M; Mabrouk, Mokhtar M; Hammad, Sherin F; Mansour, Fotouh R

2018-01-01

The development and introduction of combined therapy represent a challenge for analysis due to severe overlapping of their UV spectra in case of spectroscopy or the requirement of a long tedious and high cost separation technique in case of chromatography. Quality control laboratories have to develop and validate suitable analytical procedures in order to assay such multi component preparations. New spectrophotometric methods for the simultaneous determination of simvastatin (SIM) and nicotinic acid (NIA) in binary combinations were developed. These methods are based on chemometric treatment of data, the applied chemometric techniques are multivariate methods including classical least squares (CLS), principal component regression (PCR) and partial least squares (PLS). In these techniques, the concentration data matrix were prepared by using the synthetic mixtures containing SIM and NIA dissolved in ethanol. The absorbance data matrix corresponding to the concentration data matrix was obtained by measuring the absorbance at 12 wavelengths in the range 216 - 240 nm at 2 nm intervals in the zero-order. The spectrophotometric procedures do not require any separation step. The accuracy, precision and the linearity ranges of the methods have been determined and validated by analyzing synthetic mixtures containing the studied drugs. Chemometric spectrophotometric methods have been developed in the present study for the simultaneous determination of simvastatin and nicotinic acid in their synthetic binary mixtures and in their mixtures with possible excipients present in tablet dosage form. The validation was performed successfully. The developed methods have been shown to be accurate, linear, precise, and so simple. The developed methods can be used routinely for the determination dosage form. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

A microscopy method for scanning transmission electron microscopy imaging of the antibacterial activity of polymeric nanoparticles on a biofilm with an ionic liquid.

PubMed

Takahashi, Chisato; Muto, Shunsuke; Yamamoto, Hiromitsu

2017-08-01

In this study, we developed a scanning transmission electron microscopy (STEM) method for imaging the antibacterial activity of organic polymeric nanoparticles (NPs) toward biofilms formed by Staphylococcus epidermidis bacterial cells, for optimizing NPs to treat biofilm infections. The combination of sample preparation method using a hydrophilic ionic liquid (IL) and STEM observation using the cooling holder eliminates the need for specialized equipment and techniques for biological sample preparation. The annular dark-field STEM results indicated that the two types of biodegradable poly-(DL-lactide-co-glycolide) (PLGA) NPs: PLGA modified with chitosan (CS), and clarithromycin (CAM)-loaded + CS-modified PLGA, prepared by emulsion solvent diffusion exhibited different antibacterial activities in nanoscale. To confirm damage to the sample during STEM observation, we observed the PLGA NPs and the biofilm treated with PLGA NPs by both the conventional method and the newly developed method. The optimized method allows microstructure of the biofilm treated with PLGA NPs to be maintained for 25 min at a current flow of 40 pA. The developed simple sample preparation method would be helpful to understand the interaction of drugs with target materials. In addition, this technique could contribute to the visualization of other deformable composite materials at the nanoscale level. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1432-1437, 2017. © 2016 Wiley Periodicals, Inc.

Crosslinked polyimides prepared from N-(3-ethynylphenyl)maleimide

NASA Technical Reports Server (NTRS)

Gerber, Margaret K. (Inventor); St.clair, Terry L. (Inventor)

1993-01-01

The compound N-(3-ethynylphenyl)maleimide (NEPMI) was used to prepare thermally stable, glassy polyimides which did not exhibit glass transition temperatures below 500 C. NEPMI was blended with the maleimide of methylene dianiline (BMI) and heated to form the polyimide. NEPMI was also mixed with Thermid 600 R, a commercially available bisethynyl oligomeric material, and heated to form a thermally stable, glassy polyimide. Lastly, NEPMI was blended with both BMI and Thermid 600 R to form thermally stable, glassy polyimides.

ACTION OF TRITIATED TETANUS TOXIN AND TOXOID UPTON THE NERVOUS SYSTEM AND UPON THE ANTIBOYD FORMING MECHANISM. Period covered: April 1, 1959-March 31, 1961

DOE Office of Scientific and Technical Information (OSTI.GOV)

Speirs, R.S.

1961-10-31

>Progress is reported in studies on the action of tritiated tetanus toxin and toxoid upon the nervous system and upon the antibody forming mechanisms in mice. Procedures are described for the preparation of purified tritiated tetanus toxin. The tritiated toxin was injected into mice immunized to tetanus toxoid. Distinct differences were noted in the cellular reaction to the tritiated antigen in immunized and control animals. The data suggest that antibody-producing cells contain antigen at the time antibody is being produced. A quantitative procedure was developed for determining the number of cells responding during an inflammation. Procedures were developed for themore » automatic processing of radioautograms. ( C.H.)« less

Instruments for Assessment of Instructional Practices in Standards-Based Teaching

NASA Astrophysics Data System (ADS)

Wainwright, Camille L.

2006-12-01

This paper describes the development of two forms of an instrument used as a classroom observation protocol, designed to document the impact of reform-based professional development with undergraduate mathematics and science faculty and its impact on the resultant preparation of teachers (PreK 12). A rationale for the development and utilization of this instrument (known as the OTOP, or the Oregon Teacher Observation Protocol) is provided. Constructed upon review of the research on teaching and standards documents in mathematics and science, the protocol formed the basis for data collection in a three-year longitudinal study of teaching practice among early career teachers as well as undergraduate college faculty. In addition, this paper suggests further applications of the observation protocol beyond the original research study purpose. One prominent use for the protocol is in supervisor observations of mathematics and science student teachers.

Chamomile: A herbal medicine of the past with bright future

PubMed Central

Srivastava, Janmejai K; Shankar, Eswar; Gupta, Sanjay

2010-01-01

Chamomile is one of the most ancient medicinal herbs known to mankind. It is a member of Asteraceae/Compositae family and represented by two common varieties viz. German Chamomile (Chamomilla recutita) and Roman Chamomile (Chamaemelum nobile). The dried flowers of chamomile contain many terpenoids and flavonoids contributing to its medicinal properties. Chamomile preparations are commonly used for many human ailments such as hay fever, inflammation, muscle spasms, menstrual disorders, insomnia, ulcers, wounds, gastrointestinal disorders, rheumatic pain, and hemorrhoids. Essential oils of chamomile are used extensively in cosmetics and aromatherapy. Many different preparations of chamomile have been developed, the most popular of which is in the form of herbal tea consumed more than one million cups per day. In this review we describe the use of chamomile in traditional medicine with regard to evaluating its curative and preventive properties, highlight recent findings for its development as a therapeutic agent promoting human health. PMID:21132119

(Hetero)aromatics from dienynes, enediynes and enyne-allenes.

PubMed

Raviola, Carlotta; Protti, Stefano; Ravelli, Davide; Fagnoni, Maurizio

2016-08-07

The construction of aromatic rings has become a key objective for organic chemists. While several strategies have been developed for the functionalization of pre-formed aromatic rings, the direct construction of an aromatic core starting from polyunsaturated systems is yet a less explored field. The potential of such reactions in the formation of aromatics increased at a regular pace in the last few years. Nowadays, there are reliable and well-established procedures to prepare polyenic derivatives, such as dienynes, enediynes, enyne-allenes and hetero-analogues. This has stimulated their use in the development of innovative cycloaromatizations. Different examples have recently emerged, suggesting large potential of this strategy in the preparation of (hetero)aromatics. Accordingly, this review highlights the recent advancements in this field and describes the different conditions exploited to trigger the process, including thermal and photochemical activation, as well as the use of transition metal catalysis and the addition of electrophiles/nucleophiles or radical species.

Sm-p80-Based Schistosomiasis Vaccine: Preparation for Human Clinical Trials.

PubMed

Siddiqui, Afzal A; Siddiqui, Sabrina Z

2017-03-01

Mass antiparasitic drug administration programs and other control strategies have made important contributions in reducing the global prevalence of helminths. Schistosomiasis, however, continues to spread to new geographic areas. The advent of a viable vaccine and its deployment, coupled with existing control efforts, is expected to make significant headway towards sustained schistosomiasis control. In 2016, Science ranked the schistosomiasis vaccine as one of the top 10 vaccines that needs to be urgently developed. A vaccine that is effective against geographically distinct forms of intestinal/hepatic and urinary disease is essential to make a meaningful impact in global reduction of the disease burden. In this opinion article, we focus on salient features of schistosomiasis vaccines in different phases of the clinical development pipeline and highlight the Sm-p80-based vaccine which is now being prepared for human clinical trials. Copyright © 2016 Elsevier Ltd. All rights reserved.

Formulation design and optimization of mouth dissolve tablets of nimesulide using vacuum drying technique.

PubMed

Gohel, Mukesh; Patel, Madhabhai; Amin, Avani; Agrawal, Ruchi; Dave, Rikita; Bariya, Nehal

2004-04-26

The purpose of this research was to develop mouth dissolve tablets of nimesulide. Granules containing nimesulide, camphor, crospovidone, and lactose were prepared by wet granulation technique. Camphor was sublimed from the dried granules by exposure to vacuum. The porous granules were then compressed. Alternatively, tablets were first prepared and later exposed to vacuum. The tablets were evaluated for percentage friability, wetting time, and disintegration time. In the investigation, a 32 full factorial design was used to investigate the joint influence of 2 formulation variables: amount of camphor and crospovidone. The results of multiple linear regression analysis revealed that for obtaining a rapidly disintegrating dosage form, tablets should be prepared using an optimum concentration of camphor and a higher percentage of crospovidone. A contour plot is also presented to graphically represent the effect of the independent variables on the disintegration time and percentage friability. A checkpoint batch was also prepared to prove the validity of the evolved mathematical model. Sublimation of camphor from tablets resulted in superior tablets as compared with the tablets prepared from granules that were exposed to vacuum. The systematic formulation approach helped in understanding the effect of formulation processing variables.

TEM preparation methods and influence of radiation damage on the beam sensitive CaCO3 shell of Emiliania huxleyi.

PubMed

Hoffmann, Ramona; Wochnik, Angela S; Betzler, Sophia B; Matich, Sonja; Griesshaber, Erika; Schmahl, Wolfgang W; Scheu, Christina

2014-07-01

The ultrastructure of biologically formed calcium carbonate crystals like the shell of Emiliania huxleyi depends on the environmental conditions such as pH value, temperature and salinity. Therefore, they can be used as indicator for climate changes. However, for this a detailed understanding of their crystal structure and chemical composition is required. High resolution methods like transmission electron microscopy can provide those information on the nanoscale, given that sufficiently thin samples can be prepared. In our study, we developed sample preparation techniques for cross-section and plan-view investigations and studied the sample stability under electron bombardment. In addition to the biological material (Emiliania huxleyi) we also prepared mineralogical samples (Iceland spar) for comparison. High resolution transmission electron microscopy imaging, electron diffraction and electron energy-loss spectroscopy studies revealed that all prepared samples are relatively stable under electron bombardment at an acceleration voltage of 300 kV when using a parallel illumination. Above an accumulated dose of ∼10(5) e/nm2 the material--independent whether its origin is biological or geological--transformed to poly-crystalline calcium oxide. Copyright © 2014 Elsevier Ltd. All rights reserved.

Preparation methodologies and nano/microstructural evaluation of metal/semiconductor thin films.

PubMed

Chen, Zhiwen; Jiao, Zheng; Wu, Minghong; Shek, Chan-Hung; Wu, C M Lawrence; Lai, Joseph K L

2012-01-01

Metal/semiconductor thin films are a class of unique materials that are widespread technological applications, particularly in the field of microelectronic devices. Assessment strategies of fractal and tures are of fundamental importance in the development of nano/microdevices. This review presents the preparation methodologies and nano/microstructural evaluation of metal/semiconductor thin films including Au/Ge bilayer films and Pd-Ge alloy thin films, which show in the form of fractals and nanocrystals. Firstly, the extended version of Au/Ge thin films for the fractal crystallization of amorphous Ge and the formation of nanocrystals developed with improved micro- and nanostructured features are described in Section 2. Secondly, the nano/microstructural characteristics of Pd/Ge alloy thin films during annealing have been investigated in detail and described in Section 3. Finally, we will draw the conclusions from the present work as shown in Section 4. It is expected that the preparation methodologies developed and the knowledge of nano/microstructural evolution gained in metal/semiconductor thin films, including Au/Ge bilayer films and Pd-Ge alloy thin films, will provide an important fundamental basis underpinning further interdisciplinary research in these fields such as physics, chemistry, materials science, and nanoscience and nanotechnology, leading to promising exciting opportunities for future technological applications involving these thin films.

[Drug administration to pediatric patients: Evaluation of the nurses' preparation habits in pediatric units].

PubMed

Ménétré, S; Weber, M; Socha, M; Le Tacon, S; May, I; Schweitzer, C; Demoré, B

2018-04-01

In hospitals, the nursing staff is often confronted with the problem of the preparation and administration of drugs for their pediatric patients because of the lack of indication, pediatric dosage, and appropriate galenic form. The goal of this study was to give an overview of the nurses' preparation habits in pediatric units and highlight their daily problems. This single-center prospective study was conducted through an observation of the nursing staff during the drug preparation process in medicine, surgery and intensive care units. We included 91 patients (55 boys and 36 girls), with an average age of 6.3 years (youngest child, 10 days old; oldest child, 18 years old). We observed a mean 2.16 drug preparations per patient [1-5]. We collected 197 observation reports regarding 66 injectable drugs and 131 oral drugs (71 liquid forms and 60 solid forms). The majority of these reports concerned central nervous system drugs (63/197), metabolism and digestive system drugs (50/197), and anti-infective drugs (46/197). The study highlights the nurses' difficulties: modification of the solid galenic forms, lack of knowledge on oral liquid form preservation or reconstitution methods, withdrawal of small volumes, and vague and noncompliant labeling. This study led to the creation of a specific working group for pediatrics. This multidisciplinary team meets on a regular basis to work toward improving the current habits to both simplify and secure drug administration to hospitalized children. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

In situ preparation of powder and the sorption behaviors of molecularly imprinted polymers through the complexation between polymer ion of methyl methacrylate/acrylic acid and Ca++ ion.

PubMed

Chough, Sung Hyo; Park, Kwang Ho; Cho, Seung Jin; Park, Hye Ryoung

2014-09-02

Molecularly imprinted polymer (MIP) powders were prepared using a simple complexation strategy between the polymer carboxylate groups and template molecule followed by metal cation cross-linking of residual polymer carboxylates. Polymer powders were formed in situ by templating carboxylic acid containing polymers with 4-ethylaniline (4-EA), followed by addition of an aqueous CaCl2 solution. The solution remained homogeneous. The powders were prepared by precipitation by slowly adding a non-solvent, H2O, to the mixture. The resulting particles were very porous with uptake capacity that approached the theoretical value. We suggest two types of complexes are formed between the template, 4-EA, and polymer. The isolated entry type forms well defined cavities for the template with high specific selectivity, while the adjacent entry type forms wider binding sites without specific sorption for isomeric molecules. To evaluate conditions for forming materials with high affinity and selectivity, three MIPs were prepared containing 0.5, 1.0, and 1.5 equivalents of template to the base polymer. The MIP containing 0.5 eq showed higher specific selectivity to 4-EA, but the MIP containing 1.5 eq had noticeably lower selectivity. The lower selectivity is attributed to poorly formed binding sites with little selective sorption to any isomer when the higher ratio of template was used. However at the lower ratio of template the isolated entry is preferably formed to produce well defined binding cavities with higher selectivity to template. Copyright © 2014 Elsevier B.V. All rights reserved.

Method for the preparation of ferrous low carbon porous material

DOEpatents

Miller, Curtis Jack

2014-05-27

A method for preparing a porous metal article using a powder metallurgy forming process is provided which eliminates the conventional steps associated with removing residual carbon. The method uses a feedstock that includes a ferrous metal powder and a polycarbonate binder. The polycarbonate binder can be removed by thermal decomposition after the metal article is formed without leaving a carbon residue.

Preparation of medicines for children - a hierarchy of classification.

PubMed

Ernest, Terry B; Craig, Jo; Nunn, Anthony; Salunke, Smita; Tuleu, Catherine; Breitkreutz, Joerg; Alex, Rainer; Hempenstall, John

2012-10-05

There is some confusion about the types of paediatric pharmaceutical preparation (in a regulatory and pharmaceutical development context) that are acceptable for approval by medicines regulators. Some of the confusion relates to terminology which may mean different things to different stakeholders. It may not always be possible to provide authorised, commercially manufactured, age appropriate, ready-to-administer preparations. In terms of assurance of quality and bioavailability there is a continuum from this ideal through intermediate products through authorised compounding and manipulation of commercial dosage forms to ad hoc compounding using only the skills and experience of the individual pharmacist. Additionally, it is widely known that caregivers may manipulate medicines at home, for example by segmenting tablets and by addition to foods or liquids. The first intent of the manufacturer should be to provide for children an age appropriate, ready-to-administer preparation which is commercially manufactured and approved by the competent authorities. However, there will still be a place for providing other age appropriate preparations such as approved products that are 'intermediates' requiring reconstitution before use, or instructions for compounding or manipulation of a dosage form. If compounding or manipulation is likely to be required it is preferable that data are generated by Industry, approved by the competent authorities and provided in the Summary of Product Characteristics (SmPC). It is acknowledged however, that ad hoc compounding or manipulation may also take place in certain circumstances such as logistical difficulties or to satisfy the needs of the child who does not find the authorised product to be 'age appropriate'. This paper explores compounding and manipulation of medicines in relation to approval by medicines regulators and non-approved preparation to fulfil the needs of the individual patient. Definitions are proposed to provide a hierarchical classification based on assurances of quality and bioavailability. Copyright © 2012 Elsevier B.V. All rights reserved.

Role of excipients and polymeric advancements in preparation of floating drug delivery systems

PubMed Central

Kaushik, Avinash Y; Tiwari, Ajay K; Gaur, Ajay

2015-01-01

Since decade or two, the development of floating drug delivery systems becomes a significant and novel tool as having low density than gastric content. There are various advanced polymers including chitosan, eudragit, etc., and excipients such as; pore forming agent, surfactants, etc. All of them are discussed briefly, and results are concluded from various reputed researches. We have discussed all natural and synthetic systems with their effect on the release and other parameters which are essential for the floating formulation development. PMID:25599027

Preparation of hydroxyapatite nanoparticles by sol-gel method with optimum processing parameters

NASA Astrophysics Data System (ADS)

Yusoff, Yusriha Mohd; Salimi, Midhat Nabil Ahmad; Anuar, Adilah

2015-05-01

Many studies have been carried out in order to prepare hydroxyapatite (HAp) by various methods. In this study, we focused on the preparation of HAp nanoparticles by using sol-gel technique in which few parameters are optimized which were stirring rate, aging time and sintering temperature. HAp nanoparticles were prepared by using precursors of calcium nitrate tetrahydrate, Ca(NO3)2.4H2O and phosphorous pentoxide, P2O5. Both precursors are mixed in ethanol respectively before they were mixed together in which it formed a stable sol. Fourier transform infrared (FTIR), X-ray diffraction (XRD) and Scanning electron microscopy (SEM) were used for its characterization in terms of functional group, phase composition, crystallite size and morphology of the nanoparticles produced. FTIR spectra showed that the functional groups that present in all five samples were corresponding to the formation of HAp. Besides, XRD shows that only one phase was formed which was hydroxyapatite. Meanwhile, SEM shows that the small particles combine together to form agglomeration.

[The effect of structure of benzimidazoles on the character of forming intramolecular cross-links in DNA and chromatin].

PubMed

Mil', E M; Zhil'tsova, V M; Biniukov, V I; Zhizhina, G P; Stoliarova, L G; Kuznetsov, Iu P

1994-01-01

An investigation of a number of benzimidazole class preparations, being distinguished by a position of aminomethyl substitutes, has been carried out. It has been shown, that the non-substituted preparation BIO-10 does not form UV-cross-links in DNA and chromatine; BIO-40, having one substitute in the position 2, causes the formation of inter-molecular cross-links DNA-DNA. The preparation BIO-50, having 2 aminomethyl groups in the imidazole nucleus positions 2 and 6, forms cross-links DNA-DNA and DNA-protein in chromatine. The generation of radicals by the preparations BIO-10 and BIO-50 has been studied by the EPR-method by use of spin trap. It has been demonstrated, that BIO-10, unlike BIO-50, actively generates superoxide. A supposition has been made, that an UV-formation of superoxide-radical in the presence of BIO-10 might be a reason of DNA-macromolecule destruction.

Formulation and in vitro/in vivo evaluation of chitosan-based film forming gel containing ketoprofen.

PubMed

Oh, Dong-Won; Kang, Ji-Hyun; Lee, Hyo-Jung; Han, Sang-Duk; Kang, Min-Hyung; Kwon, Yie-Hyuk; Jun, Joon-Ho; Kim, Dong-Wook; Rhee, Yun-Seok; Kim, Ju-Young; Park, Eun-Seok; Park, Chung-Woong

2017-11-01

The film forming gel, adhered to skin surfaces upon application and formed a film, has an advantage onto skin to provide protection and continuous drug release to the application site. This study aimed to prepare a chitosan-based film forming gel containing ketoprofen (CbFG) and to evaluate the CbFG and film from CbFG (CbFG-film). CbFG were prepared with chitosan, lactic acid and various skin permeation enhancers. The physicochemical characteristics were evaluated by texture analysis, viscometry, SEM, DSC, XRD and FT-IR. To identify the mechanism of skin permeation, in vitro skin permeation study was conducted with a Franz diffusion cell and excised SD-rat and hairless mouse dorsal skin. In vivo efficacy assessment in mono-iodoacetate (MIA)-induced rheumatoid arthritis animal model was also conducted. CbFG was successfully prepared and, after applying CbFG to the excised rat dorsal skin, the CbFG-film was also formed well. The physicochemical characteristics of CbFG and CbFG-film could be explained by the grafting of oleic acid onto chitosan in the absence of catalysts. In addition, CbFG containing oleic acid had a higher skin permeation rate in comparison with any other candidate enhancers. The in vivo efficacy study also confirmed significant anti-inflammatory and analgesic effects. Consequently, we report the successful preparation of chitosan-based film forming gel containing ketoprofen with excellent mechanical properties, skin permeation and anti-inflammatory and analgesic effects.

Development of sustained release floating drug delivery system for norfloxacin: in vitro and in vivo evaluation.

PubMed

Guguloth, Mohan; Bomma, Ramesh; Veerabrahma, Kishan

2011-01-01

Norfloxacin is a drug with an absorption window. Its oral bioavailability is 30-40% and is a case for improvement by appropriate formulation design. In our previous study, gastroretentive floating tablets for norfloxacin were developed employing three different polymers such as HPMC K4M, HPMC K100M, and xanthan gum. The purpose of this investigation is to further improve and evaluate the in vitro and in vivo performance of the prepared floating tablets by inclusion of citric acid as an acidifier, which is also useful in a fed state. The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. The effects of citric acid at different concentrations on drug release and floating properties were studied. All the prepared batches showed good in vitro buoyancy. It was observed that the tablets remained buoyant for 24 h. The best formulation (F4c), consisting of 1.5% citric acid and 18% HPMC K4M, was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate. These studies revealed that the tablets remained in the stomach for 205 ± 8.4 min in fasting human volunteers. In vivo studies were carried out for the best formulation in eight healthy male human volunteers, and the pharmacokinetic parameters of the developed formulation were compared with marketed conventional (Norbid) tablets. Based on the in vivo performance in a two-way, crossover study design in healthy subjects, the developed floating tablets showed superior bioavailability than the Norbid tablets. The increased bioavailability of developed formulation was found to be 16.27%. Norfloxacin is a broad-spectrum antibiotic used to treat bacterial infections such as respiratory and urinary tract infections. Conventional norfloxacin tablets show incomplete drug absorption resulting in lower bioavailabilty. Norfloxacin is better absorbed in the stomach. The dosage forms that remain in the stomach are referred to as gastroretentive drug delivery systems. Gastroretentive floating tablets of norfloxcin were developed by employing three different polymers, which prolonged the drug release from the dosage forms. Tablet floatation was achieved by an effervescent mechanism. Citric acid at different concentrations was used in formulations to provide an acidic microenvironment. The prepared tablets were characterized for hardness, weight variation, thickness, friability, floating lag time, and dissolution. Around 12 tablet formulations were prepared as a continuation of the previous work. The best formulation (F4c) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent. The tablets remained in the stomach for about 205 ± 8.4 min. Bioavailability studies were conducted in healthy male human volunteers, and the pharmacokinetic parameters of the best formulation were compared with that of the marketed conventional (Norbid) tablet. The increased bioavailability of the developed formulation was found to be 16.27%.

The Group-Based Assessment Approach in Nursing Education: The Perspective of Nursing Students on Group-Based Assessment Process at a Namibian University

ERIC Educational Resources Information Center

Nuuyoma, Vistolina

2017-01-01

Group-based assessments used in the Bachelor of Nursing Science (clinical) Honours programme at a public university in Namibia are usually in the form of assignments and projects. Completing tasks in groups helps students to develop important skills like critical thinking and debating. In addition, it prepares them to work in the health-care…

Investigation of single crystal ferrite thin films

NASA Technical Reports Server (NTRS)

Mee, J. E.; Besser, P. J.; Elkins, P. E.; Glass, H. L.; Whitcomb, E. C.

1972-01-01

Materials suitable for use in magnetic bubble domain memories were developed for aerospace applications. Practical techniques for the preparation of such materials in forms required for fabrication of computer memory devices were considered. The materials studied were epitaxial films of various compositions of the gallium-substituted yttrium gadolinium iron garnet system. The major emphasis was to determine their bubble properties and the conditions necessary for growing uncracked, high quality films.

Development of an Advanced Injectable Therapy for Ischemic Vascular Disease

DTIC Science & Technology

2017-10-01

Aaron Baker CONTRACTING ORGANIZATION: University of Texas at Austin Austin TX 78712 REPORT DATE: October 2017 TYPE OF REPORT : Annual PREPARED FOR...Distribution Unlimited The views, opinions and/or findings contained in this report are those of the author(s) and should not be construed as an official...Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No

Expert Meeting on the Training of Information Users in Higher Education (Espoo, Finland, August 13-17, 1990). Final Report.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Paris (France). General Information Programme.

The purpose of this meeting was to solicit input for action on the topic of training information users in higher education with special reference to the needs of developing countries. Two documents which had been prepared to form the basis for discussion were introduced: a report of a survey that had investigated what was being done in selected…

Calcium alginate particles for the combined delivery of platelet lysate and vancomycin hydrochloride in chronic skin ulcers.

PubMed

Mori, Michela; Rossi, Silvia; Bonferoni, Maria Cristina; Ferrari, Franca; Sandri, Giuseppina; Riva, Federica; Del Fante, Claudia; Perotti, Cesare; Caramella, Carla

2014-01-30

The aim of the present work was the development of a powder formulation for the combined delivery of platelet lysate and of a model antibiotic drug, vancomycin hydrochloride (VCM), in chronic skin ulcers. Calcium alginate particles were prepared by freeze-drying beads obtained by ionic gelation method. The experimental conditions adopted permitted the complete loading of VCM and of PDGF AB, the growth factor chosen as representative of those contained in PL. Such particles where able to absorb PBS (mimicking wound exudate), to form a gel and to modulate the release of VCM and of PDGF AB. They are characterized by enhancement properties of human fibroblast proliferation due to PL presence. In particular, PL, when loaded in alginate particles, was able not only to increase the number of viable cells, but also the number of cells in proliferative phase. Such properties were comparable to those of fresh PL indicating the capability of calcium alginate particles to load PL bioactive substances without altering their activity. The formulation developed is characterized by an easier and a less painful administration with respect to traditional gauzes and semisolid preparations and permits the loading in the same dosage form of active substances of different nature avoiding eventual incompatibility problems. Copyright © 2013 Elsevier B.V. All rights reserved.

Development and evaluation of new multiple-unit levodopa sustained-release floating dosage forms.

PubMed

Goole, J; Vanderbist, F; Amighi, K

2007-04-04

This work relates to the development and the in vitro evaluation of sustained-release minitablets (MT), prepared by melt granulation and subsequent compression, which are designed to float over an extended period of time. Levodopa was used as a model drug. The importance of the composition and manufacturing parameters of the MT on their floating and dissolution properties was then examined. The investigation showed that MT composition and MT diameter had the greatest influence on drug release, which was sustained for more than 8h. By using the same formulation, the best floating properties were obtained with 3mm MT prepared at low compression forces ranging between 50 and 100N. Their resultant-weight (RW) values were always higher than those obtained with a marketed HBS dosage form within 13h. When they were filled into gelatin capsules, no sticking was observed. By evaluating the dissolution profiles of levodopa at different pH values, it was found that dissolution profiles depend more on the prolonged-release ability of Methocel K15M than on the pH-dependent solubility of levodopa. Finally, the robustness of the floating MT was assessed by testing the drug release variability in function of the stirring conditions during dissolution tests.

Novel Resorbable and Osteoconductive Calcium Silicophosphate Scaffold Induced Bone Formation

PubMed Central

Ros-Tárraga, Patricia; Mazón, Patricia; Rodríguez, Miguel A.; Meseguer-Olmo, Luis; De Aza, Piedad N.

2016-01-01

This aim of this research was to develop a novel ceramic scaffold to evaluate the response of bone after ceramic implantation in New Zealand (NZ) rabbits. Ceramics were prepared by the polymer replication method and inserted into NZ rabbits. Macroporous scaffolds with interconnected round-shaped pores (0.5–1.5 mm = were prepared). The scaffold acted as a physical support where cells with osteoblastic capability were found to migrate, develop processes, and newly immature and mature bone tissue colonized on the surface (initially) and in the material’s interior. The new ceramic induced about 62.18% ± 2.28% of new bone and almost complete degradation after six healing months. An elemental analysis showed that the gradual diffusion of Ca and Si ions from scaffolds into newly formed bone formed part of the biomaterial’s resorption process. Histological and radiological studies demonstrated that this porous ceramic scaffold showed biocompatibility and excellent osteointegration and osteoinductive capacity, with no interposition of fibrous tissue between the implanted material and the hematopoietic bone marrow interphase, nor any immune response after six months of implantation. No histological changes were observed in the various organs studied (para-aortic lymph nodes, liver, kidney and lung) as a result of degradation products being released. PMID:28773906

Using intranet-based order sets to standardize clinical care and prepare for computerized physician order entry.

PubMed

Heffner, John E; Brower, Kathleen; Ellis, Rosemary; Brown, Shirley

2004-07-01

The high cost of computerized physician order entry (CPOE) and physician resistance to standardized care have delayed implementation. An intranet-based order set system can provide some of CPOE's benefits and offer opportunities to acculturate physicians toward standardized care. INTRANET CLINICIAN ORDER FORMS (COF): The COF system at the Medical University of South Carolina (MUSC) allows caregivers to enter and print orders through the intranet at points of care and to access decision support resources. Work on COF began in March 2000 with transfer of 25 MUSC paper-based order set forms to an intranet site. Physician groups developed additional order sets, which number more than 200. Web traffic increased progressively during a 24-month period, peaking at more than 6,400 hits per month to COF. Decision support tools improved compliance with Centers for Medicare & Medicaid Services core indicators. Clinicians demonstrated a willingness to develop and use order sets and decision support tools posted on the COF site. COF provides a low-cost method for preparing caregivers and institutions to adopt CPOE and standardization of care. The educational resources, relevant links to external resources, and communication alerts will all link to CPOE, thereby providing a head start in CPOE implementation.

Zinc Oxide-Containing Porous Boron-Carbon-Nitrogen Sheets from Glycine-Nitrate Combustion: Synthesis, Self-Cleaning, and Sunlight-Driven Photocatalytic Activity.

PubMed

Bharathidasan, T; Mandalam, Aditya; Balasubramanian, M; Dhandapani, P; Sathiyanarayanan, S; Mayavan, Sundar

2015-08-26

We developed a single-step thermal method that enables successful inclusion of ZnO components in the porous boron-carbon-nitrogen (BCN) framework to form a new class of functional hybrid. ZnO-containing BCN hybrids were prepared by treating a mixture of B2O3, glycine, and zinc nitrate at 500 °C. Glycine-nitrate decomposition along with B2O3 acts as a source for ZnO-BCN formation. The incorporation of ZnO onto BCN has extended the photoresponse of ZnO in the visible region, which makes ZnO-BCN a preferable photocatalyst relative to ZnO upon sunlight exposure. It is interesting to note that as-prepared 2D ZnO-BCN sheets dispersed in PDMS form a stable coating over aluminum alloys. The surface exhibited a water contact angle (CA) of 157.6° with 66.6 wt % ZnO-BCN in polydimethylsiloxane (PDMS) and a water droplet (7 μL) roll-off angle of <6° and also demonstrates oil fouling resistant superhydrophobicity. In brief, the present study focuses on the gram scale synthesis of a new class of sunlight-driven photocatalyst and also its application toward the development of superhydrophobic and oleophobic coating.

Crystallization processes in pharmaceutical technology and drug delivery design

NASA Astrophysics Data System (ADS)

Shekunov, B. Yu; York, P.

2000-04-01

Crystallization is a major technological process for particle formation in pharmaceutical industry and, in addition, plays an important role in defining the stability and drug release properties of the final dosage forms. Industrial and regulatory aspects of crystallization are briefly reviewed with reference to solid-state properties of pharmaceuticals. Crystallization, incorporating wider definition to include precipitation and solid-state transitions, is considered in terms of preparation of materials for direct compression, formation of amorphous, solvated and polymorphic forms, chiral separation of drugs, production of materials for inhalation drug delivery and injections. Finally, recent developments in supercritical fluid particle technology is considered in relationship to the areas discussed.

Bridging the gaps: a global review of intersections of violence against women and violence against children

PubMed Central

Guedes, Alessandra; Bott, Sarah; Garcia-Moreno, Claudia; Colombini, Manuela

2016-01-01

Background The international community recognises violence against women (VAW) and violence against children (VAC) as global human rights and public health problems. Historically, research, programmes, and policies on these forms of violence followed parallel but distinct trajectories. Some have called for efforts to bridge these gaps, based in part on evidence that individuals and families often experience multiple forms of violence that may be difficult to address in isolation, and that violence in childhood elevates the risk of violence against women. Methods This article presents a narrative review of evidence on intersections between VAC and VAW – including sexual violence by non-partners, with an emphasis on low- and middle-income countries. Results We identify and review evidence for six intersections: 1) VAC and VAW have many shared risk factors. 2) Social norms often support VAW and VAC and discourage help-seeking. 3) Child maltreatment and partner violence often co-occur within the same household. 4) Both VAC and VAW can produce intergenerational effects. 5) Many forms of VAC and VAW have common and compounding consequences across the lifespan. 6) VAC and VAW intersect during adolescence, a time of heightened vulnerability to certain kinds of violence. Conclusions Evidence of common correlates suggests that consolidating efforts to address shared risk factors may help prevent both forms of violence. Common consequences and intergenerational effects suggest a need for more integrated early intervention. Adolescence falls between and within traditional domains of both fields and deserves greater attention. Opportunities for greater collaboration include preparing service providers to address multiple forms of violence, better coordination between services for women and for children, school-based strategies, parenting programmes, and programming for adolescent health and development. There is also a need for more coordination among researchers working on VAC and VAW as countries prepare to measure progress towards 2030 Sustainable Development Goals. PMID:27329936

[Application characteristics and situation analysis of volatile oils in database of Chinese patent medicine].

PubMed

Wang, Sai-Jun; Wu, Zhen-Feng; Yang, Ming; Wang, Ya-Qi; Hu, Peng-Yi; Jie, Xiao-Lu; Han, Fei; Wang, Fang

2014-09-01

Aromatic traditional Chinese medicines have a long history in China, with wide varieties. Volatile oils are active ingredients extracted from aromatic herbal medicines, which usually contain tens or hundreds of ingredients, with many biological activities. Therefore, volatile oils are often used in combined prescriptions and made into various efficient preparations for oral administration or external use. Based on the sources from the database of Newly Edited National Chinese Traditional Patent Medicines (the second edition), the author selected 266 Chinese patent medicines containing volatile oils in this paper, and then established an information sheet covering such items as name, dosage, dosage form, specification and usage, and main functions. Subsequently, on the basis of the multidisciplinary knowledge of pharmaceutics, traditional Chinese pharmacology and basic theory of traditional Chinese medicine, efforts were also made in the statistics of the dosage form and usage, variety of volatile oils and main functions, as well as the status analysis on volatile oils in terms of the dosage form development, prescription development, drug instruction and quality control, in order to lay a foundation for the further exploration of the market development situations of volatile oils and the future development orientation.

Method and apparatus for the production of metal oxide powder

DOEpatents

Harris, Michael T.; Scott, Timothy C.; Byers, Charles H.

1993-01-01

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed.

Method and apparatus for the production of metal oxide powder

DOEpatents

Harris, Michael T.; Scott, Timothy C.; Byers, Charles H.

1992-01-01

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed.

Method and apparatus for the production of metal oxide powder

DOEpatents

Harris, M.T.; Scott, T.C.; Byers, C.H.

1992-06-16

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed. 2 figs.

Porous Inorganic Drug Delivery Systems-a Review.

PubMed

Sayed, E; Haj-Ahmad, R; Ruparelia, K; Arshad, M S; Chang, M-W; Ahmad, Z

2017-07-01

Innovative methods and materials have been developed to overcome limitations associated with current drug delivery systems. Significant developments have led to the use of a variety of materials (as excipients) such as inorganic and metallic structures, marking a transition from conventional polymers. Inorganic materials, especially those possessing significant porosity, are emerging as good candidates for the delivery of a range of drugs (antibiotics, anticancer and anti-inflammatories), providing several advantages in formulation and engineering (encapsulation of drug in amorphous form, controlled delivery and improved targeting). This review focuses on key selected developments in porous drug delivery systems. The review provides a short broad overview of porous polymeric materials for drug delivery before focusing on porous inorganic materials (e.g. Santa Barbara Amorphous (SBA) and Mobil Composition of Matter (MCM)) and their utilisation in drug dosage form development. Methods for their preparation and drug loading thereafter are detailed. Several examples of porous inorganic materials, drugs used and outcomes are discussed providing the reader with an understanding of advances in the field and realistic opportunities.

Assessment of Retention and Resistance Form of Tooth Preparations for All Ceramic Restorations using Digital Imaging Technique.

PubMed

Muruppel, Alex M; Thomas, Joyce; Saratchandran, Sudeep; Nair, Dinesh; Gladstone, Sheeba; Rajeev, Milen M

2018-02-01

This in vitro study evaluated the resistance form of die preparations for all ceramic restorations and, thereby, explored the concept of effective taper and its correlation between the ideal in theory and actual in the clinical situation by analyzing the digital images of the die preparations. Scanned digital images of 114 die preparations for all ceramic restorations (n = 114) were collected from a dental laboratory. All the images were also analyzed digitally using Adobe Photoshop® software to analyze the degree of taper (angle of convergence) of each preparation and then applied the Zuckerman's circle, and the Lewis perpendicular methods were used to measure the resistance form. For the current study, the overall average degree of taper was found to be 20.9° (range, 2-80°), which is more than what is recommended by most previous studies and also sharply greater than the textbook ideal of 3 to 6°. Mean degree of taper for maxillary was 17.56° (anterior-10.50°, posterior-23.7°), and for mandibular teeth, it was 25.22° (anterior-15°, posterior- 28.45°). Out of the 64 analyzed images of maxillary teeth, 61 presented resistance form, while 3 were without it. Out of the 50 mandibular teeth analyzed, 38 possessed resistance form, whereas 12 were without. All the anterior teeth showed resistance form irrespective of the arch. The degree of taper showed a significant relationship with resistance and retention form, which was inversely proportional to each other. The recommended "degree of taper" is not always the clinically achievable as advocated in textbooks, as it is modified by various factors in the actual clinical situation. The study provides scientific background regarding the relationship between the degree of taper with resistance and retention form, and the relationship was found to be inversely proportional to each other. The recommended "degree of taper" is not always the clinically achievable as advocated in textbooks, and it is modified by various modifying or limiting factors in the actual clinical situation.

Forms of vitality play and symbolic play during the third year of life.

PubMed

Español, Silvia; Bordoni, Mariana; Martínez, Mauricio; Camarasa, Rosario; Carretero, Soledad

2015-08-01

This article focuses on the development of forms of vitality play, a recently described type of play, and links it to the development of symbolic play, one of the most studied types of play in developmental psychology. Two adult-infant dyads were videotaped longitudinally during in-house free play meetings every 15 days during the third year of life. Convergence technique was applied in order to accelerate the longitudinal study. A total of 17h 48min were registered in 28 sessions. An observational code with categories of forms of vitality play (a non-figurative play frame in which child and adult play together with the dynamics of their own movements and sounds in a repetition-variation form), symbolic play, and categories of combined patterns of both types of play was applied. The rate of each play was calculated for different age periods. Forms of vitality play is present at a constant rate during the third year of life. Symbolic play flourishes during this period. Combined play patterns are not the most frequent but are present from the beginning to the end of the third year. We suggest that FoVP favours intimate and intersubjective experiences essential to the understanding and the development of the interpersonal world; that it can be thought of as a good runway for the development of symbolic play; and that it prepares the child to participate in the temporal arts that belong to his culture. Copyright © 2015 Elsevier Inc. All rights reserved.

On the Tetragonal Forms of KMo 4O 6

NASA Astrophysics Data System (ADS)

McCarroll, W. H.; Ramanujachary, K. V.; Greenblatt, M.; Marsh, Richard E.

1995-06-01

A reexamination of the X-ray diffraction data for the tetragonal form of KMo4O6 prepared by fused salt electrolysis leads to the conclusion that the crystal structure is better described by using space group P 4/mbm and not P4¯ as previously reported. However, refinement in the new space group does not result in any significant changes in the atomic arrangement. Possible reasons for the significant difference between the c lattice parameter of this form of KMo4O6 and that prepared at high pressures are also discussed.

"Out" Gay and Lesbian Faculty and the Inclusion of Sexual Orientation Topics in Teacher Preparation Programmes in the USA

ERIC Educational Resources Information Center

Jennings, Todd

2010-01-01

Do "out" lesbian and gay faculty influence the inclusion of sexual orientation as a form of diversity in their teacher preparation programmes? Data gathered from 142 teacher preparation programmes across the USA (representing the preparation of 23,000-30,000 new teachers annually) suggest they do not. Likewise, the priority placed upon…

Proposed correlation of modern processing principles for Ayurvedic herbal drug manufacturing: A systematic review.

PubMed

Jain, Rahi; Venkatasubramanian, Padma

2014-01-01

Quality Ayurvedic herbal medicines are potential, low-cost solutions for addressing contemporary healthcare needs of both Indian and global community. Correlating Ayurvedic herbal preparations with modern processing principles (MPPs) can help develop new and use appropriate technology for scaling up production of the medicines, which is necessary to meet the growing demand. Understanding the fundamental Ayurvedic principles behind formulation and processing is also important for improving the dosage forms. Even though Ayurvedic industry has adopted technologies from food, chemical and pharmaceutical industries, there is no systematic study to correlate the traditional and modern processing methods. This study is an attempt to provide a possible correlation between the Ayurvedic processing methods and MPPs. A systematic literature review was performed to identify the Ayurvedic processing methods by collecting information from English editions of classical Ayurveda texts on medicine preparation methods. Correlation between traditional and MPPs was done based on the techniques used in Ayurvedic drug processing. It was observed that in Ayurvedic medicine preparations there were two major types of processes, namely extraction, and separation. Extraction uses membrane rupturing and solute diffusion principles, while separation uses volatility, adsorption, and size-exclusion principles. The study provides systematic documentation of methods used in Ayurveda for herbal drug preparation along with its interpretation in terms of MPPs. This is the first step which can enable improving or replacing traditional techniques. New technologies or use of existing technologies can be used to improve the dosage forms and scaling up while maintaining the Ayurvedic principles similar to traditional techniques.

Pseudoephedrine hydrochloride sustained-release pellets prepared by a combination of hot-melt subcoating and polymer coating.

PubMed

Yang, Zi Yi; Lu, Yan; Tang, Xing

2008-12-01

Pseudoephedrine hydrochloride is an active very highly water soluble substance. In order to control release of a drug with this property, we developed the application of a combination of hot-melt subcoating and polymer coating was developed. The main objective was to investigate the influence of this combination on the release of highly water soluble drug and how it works. Hot-melt subcoating was achieved by using a coating pan. Subsequently, the outer polymer coating was prepared by fluidized bed, and the drug release was determined by high-performance liquid chromatograph (HPLC) method. Hot-melt subcoating can form a barrier between the drug-loaded pellets and the polymer coating layer, which prevents migration of the drug during film application. Consequently, the level of polymer coating can be reduced significantly, and the effectiveness of the polymer coating increased. In this study, the release profile of pellets with a 10% hot-melt subcoating and 5% polymer coating weight gain met the dissolution requirement of USP29 for pseudoephedrine hydrochloride extended-release capsules. Compared with pellets only polymer coated (10% level), the polymer coating level of pellets prepared by this technology was reduced by half due to hot-melt subcoating. By means of this hot-melt subcoating and polymer coating, sustained-release pellets containing pseudoephedrine hydrochloride were successfully prepared.

SCALE UP OF CERAMIC WASTE FORMS FOR THE EBR-II SPENT FUEL TREATMENT PROCESS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthew C. Morrison; Kenneth J. Bateman; Michael F. Simpson

2010-11-01

ABSTRACT SCALE UP OF CERAMIC WASTE FORMS FOR THE EBR-II SPENT FUEL TREATMENT PROCESS Matthew C. Morrison, Kenneth J. Bateman, Michael F. Simpson Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415 The ceramic waste process is the intended method for disposing of waste salt electrolyte, which contains fission products from the fuel-processing electrorefiners (ER) at the INL. When mixed and processed with other materials, the waste salt can be stored in a durable ceramic waste form (CWF). The development of the CWF has recently progressed from small-scale testing and characterization to full-scale implementation and experimentation using surrogate materialsmore » in lieu of the ER electrolyte. Two full-scale (378 kg and 383 kg) CWF test runs have been successfully completed with final densities of 2.2 g/cm3 and 2.1 g/cm3, respectively. The purpose of the first CWF was to establish material preparation parameters. The emphasis of the second pre-qualification test run was to evaluate a preliminary multi-section CWF container design. Other considerations were to finalize material preparation parameters, measure the material height as it consolidates in the furnace, and identify when cracking occurs during the CWF cooldown process.« less

Development and validation of spectrophotometric methods for estimating amisulpride in pharmaceutical preparations.

PubMed

Sharma, Sangita; Neog, Madhurjya; Prajapati, Vipul; Patel, Hiren; Dabhi, Dipti

2010-01-01

Five simple, sensitive, accurate and rapid visible spectrophotometric methods (A, B, C, D and E) have been developed for estimating Amisulpride in pharmaceutical preparations. These are based on the diazotization of Amisulpride with sodium nitrite and hydrochloric acid, followed by coupling with N-(1-naphthyl)ethylenediamine dihydrochloride (Method A), diphenylamine (Method B), beta-naphthol in an alkaline medium (Method C), resorcinol in an alkaline medium (Method D) and chromotropic acid in an alkaline medium (Method E) to form a colored chromogen. The absorption maxima, lambda(max), are at 523 nm for Method A, 382 and 490 nm for Method B, 527 nm for Method C, 521 nm for Method D and 486 nm for Method E. Beer's law was obeyed in the concentration range of 2.5-12.5 microg mL(-1) in Method A, 5-25 and 10-50 microg mL(-1) in Method B, 4-20 microg mL(-1) in Method C, 2.5-12.5 microg mL(-1) in Method D and 5-15 microg mL(-1) in Method E. The results obtained for the proposed methods are in good agreement with labeled amounts, when marketed pharmaceutical preparations were analyzed.

Development of porous structured polyvinyl alcohol/zeolite/carbon composites as adsorbent

NASA Astrophysics Data System (ADS)

Laksmono, J. A.; Sudibandriyo, M.; Saputra, A. H.; Haryono, A.

2017-05-01

Adsorption is a separation process that has higher energy efficiency than others. Analyzing the nature of the adsorbate and the selection of suitable adsorbent are key success in adsorption. The performance of the adsorbent can be modified either physically or chemically to obtain the efficiency and effectiveness of the adsorption, this can be facilitated by using a composite adsorbent. In this study, we have conducted the preparation process of a polyvinyl alcohol (PVA)/zeolite/carbon composites. The resulting adsorbent composites are dedicated for ethanol - water dehydration proposes. The composites were prepared using cross-linked polymerization method followed by supercritical fluid extraction (SFE) to obtain the porous structured upon drying process. The characterization of the functional groups and morphology were performed by using Fourier Transform Infra-Red (FTIR) and Scanning Electron Microscopy (SEM), respectively. The FTIR analysis showed that composite prepared by SFE method formed hydrogen bonding confirmed by the appearance of peaks at 2950 - 3000 cm-1 compared to composite without SFE method, whereas, the results of SEM study showed the formation of three layered structures. On basis of the obtained results, it can be shown that PVA/zeolite/carbon has high potential to be develop further as an adsorbent composite.

Zero- and two-dimensional hybrid carbon phosphors for high colorimetric purity white light-emission.

PubMed

Ding, Yamei; Chang, Qing; Xiu, Fei; Chen, Yingying; Liu, Zhengdong; Ban, Chaoyi; Cheng, Shuai; Liu, Juqing; Huang, Wei

2018-03-01

Carbon nanomaterials are promising phosphors for white light emission. A facile single-step synthesis method has been developed to prepare zero- and two-dimensional hybrid carbon phosphors for the first time. Zero-dimensional carbon dots (C-dots) emit bright blue luminescence under 365 nm UV light and two-dimensional nanoplates improve the dispersity and film forming ability of C-dots. As a proof-of-concept application, the as-prepared hybrid carbon phosphors emit bright white luminescence in the solid state, and the phosphor-coated blue LEDs exhibit high colorimetric purity white light-emission with a color coordinate of (0.3308, 0.3312), potentially enabling the successful application of white emitting phosphors in the LED field.

A new approach to the side chain formation of 24-alkyl-22-hydroxy steroids: application to the preparation of early brassinolide biosynthetic precursors.

PubMed

Hurski, Alaksiej L; Zhabinskii, Vladimir N; Khripach, Vladimir A

2012-06-01

A new synthetic route to 22S-hydroxy-24R-methyl steroids has been developed and applied for the preparation of cathasterone, (22S)-hydroxycampesterol, and 6-deoxocathasterone, which are precursors in the early stages of the biosynthesis of brassinolide. The construction of the steroid side chain with the correct stereochemistry at C-24 is based on the use of Claisen rearrangement. The introduction of the 22-hydroxyl group has been achieved by epoxidation of the Δ(22)-double bond, nucleophilic opening of the intermediate mesyl epoxide with sodium sulfide, and desulfurization of the formed tetrahydrothiophenes with Raney nickel. Copyright © 2012 Elsevier Inc. All rights reserved.

Nanostructured Metal Oxides for Stoichiometric Degradation of Chemical Warfare Agents.

PubMed

Štengl, Václav; Henych, Jiří; Janoš, Pavel; Skoumal, Miroslav

2016-01-01

Metal oxides have very important applications in many areas of chemistry, physics and materials science; their properties are dependent on the method of preparation, the morphology and texture. Nanostructured metal oxides can exhibit unique characteristics unlike those of the bulk form depending on their morphology, with a high density of edges, corners and defect surfaces. In recent years, methods have been developed for the preparation of metal oxide powders with tunable control of the primary particle size as well as of a secondary particle size: the size of agglomerates of crystallites. One of the many ways to take advantage of unique properties of nanostructured oxide materials is stoichiometric degradation of chemical warfare agents (CWAs) and volatile organic compounds (VOC) pollutants on their surfaces.

Synthesis of aluminum-based scandium-yttrium master alloys

NASA Astrophysics Data System (ADS)

Bazhin, V. Yu.; Kosov, Ya. I.; Lobacheva, O. L.; Dzhevaga, N. V.

2015-07-01

The preparation technology for an Al-2% Sc-0.5% Y master alloy using aluminum-manganese alloys has been developed and tested. The microstructure of the prepared master alloy is studied and the compositions of intermetallics is determined. The efficient technological parameters of the synthesis are determined. It is shown that varying the compositions of starting reagents and alloying additions and optimizing the process conditions (temperature, mixing, etc.) allow us to forecast the manufacturing and operating characteristics of aluminum-based master alloys. Joint additions of scandium and yttrium oxides to a charge favor a substantial decrease in the grain size of the formed intermetallics; this effect appears to the utmost in the case of microallying with yttrium up to 0.5 wt %.

Enhanced supercapacitor performances using C-doped porous TiO2 electrodes

NASA Astrophysics Data System (ADS)

Chen, Juanrong; Qiu, Fengxian; Zhang, Ying; Liang, Jianzheng; Zhu, Huijun; Cao, Shunsheng

2015-11-01

Considerable efforts have been paid to develop electrochemical capacitors with energy storage capability in order to meet the demands of multifunctional electronics. Here we report a facile method to fabricate C-doped porous anatase TiO2. This technique involves the preparation of monodisperse cationic polystyrene nanoparticles (CPN), following sequential deposition of tetrabutylorthotitanate (TBT), and directly carbonizing of CPN. Interestingly, during the process of carbonizing CPN, a phase transition of TiO2 will be happened and whist C-doped porous anatase TiO2 is in situ formed. When this porous C-doped TiO2 is used as electrode material to prepare electrochemical capacitor, it manifests a higher capacitance than the commercial P25, effectively broadening it potential for many practical applications.

78 FR 7858 - Proposed Collection; Comment Request for Information Collection tools.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... Foreign Corporation; Form 13614-NR, Volunteer Return Preparation Critical Intake Sheet-NR; and REG-209006... min. Estimated Total Annual Burden Hours: 35. (2) Title: Volunteer Return Preparation Critical Intake... nonresident alien VITA sites by volunteers to gather information--relevant to tax preparation--from taxpayer's...

Extemporaneous drug formulations.

PubMed

Nahata, Milap C; Allen, Loyd V

2008-11-01

Access to a special dosage form of a medication is essential when administration to infants and children and selected other populations is required. Some drugs necessary for pediatric patients are not commercially available in dosage forms appropriate for use in this population. These drugs may be prepared extemporaneously for use in individual patients. Physical and chemical properties of drugs and excipients should be considered when preparing extemporaneous formulations. These formulations, however, may lack studies to document stability, bioavailability, pharmacokinetics, pharmacodynamics, efficacy, and tolerability. The goal of this article was to discuss factors involved in extemporaneous compounding of pediatric dosage forms. The proceedings from a Pediatric Formulation Initiative workshop sponsored by the Eunice Kennedy Shriver National Institute of Child Health and Human Development, held December 6 and 7, 2005, in Bethesda, Maryland, were used as a source of information for this article. A literature search of PubMed/ MEDLINE (1966-October 2008) was also conducted, using the search terms extemporaneous, drug formulations, and pediatric. Access to age-appropriate drug formulations is critical to provide effective and well-tolerated medications to patients. There continues to be a need for extemporaneous formulations of brand and generic drugs for neonates, infants, and children. Potential solutions to current limitations include the need to develop a prioritized list of essential formulations, increased funding of research, dissemination of data, and monitoring of clinical effectiveness and tolerability during use in various age groups of pediatric patients and the sharing of these clinical experiences. To achieve desired therapeutic outcomes in pediatric patients, access to age-appropriate, stable, effective, and well-tolerated drug formulations is essential.

Drug-Drug Multicomponent Solid Forms: Cocrystal, Coamorphous and Eutectic of Three Poorly Soluble Antihypertensive Drugs Using Mechanochemical Approach.

PubMed

Haneef, Jamshed; Chadha, Renu

2017-08-01

The present study deals with the application of mechanochemical approach for the preparation of drug-drug multicomponent solid forms of three poorly soluble antihypertensive drugs (telmisartan, irbesartan and hydrochlorothiazide) using atenolol as a coformer. The resultant solid forms comprise of cocrystal (telmisartan-atenolol), coamorphous (irbesartan-atenolol) and eutectic (hydrochlorothiazide-atenolol). The study emphasizes that solid-state transformation of drug molecules into new forms is a result of the change in structural patterns, diminishing of dimers and creating new facile hydrogen bonding network based on structural resemblance. The propensity for heteromeric or homomeric interaction between two different drugs resulted into diverse solid forms (cocrystal/coamorphous/eutectics) and become one of the interesting aspects of this research work. Evaluation of these solid forms revealed an increase in solubility and dissolution leading to better antihypertensive activity in deoxycorticosterone acetate (DOCA) salt-induced animal model. Thus, development of these drug-drug multicomponent solid forms is a promising and viable approach to addressing the issue of poor solubility and could be of considerable interest in dual drug therapy for the treatment of hypertension.

In situ forming phase-inversion implants for sustained ocular delivery of triamcinolone acetonide.

PubMed

Sheshala, Ravi; Hong, Gan Chew; Yee, Wong Pui; Meka, Venkata Srikanth; Thakur, Raghu Raj Singh

2018-02-26

The objectives of this study were to develop biodegradable poly-lactic-co-glycolic acid (PLGA) based injectable phase inversion in situ forming system for sustained delivery of triamcinolone acetonide (TA) and to conduct physicochemical characterisation including in vitro drug release of the prepared formulations. TA (at 0.5%, 1% and 2.5% w/w loading) was dissolved in N-methyl-2-pyrrolidone (NMP) solvent and then incorporated 30% w/w PLGA (50/50 and 75/25) polymer to prepare homogenous injectable solution. The formulations were evaluated for rheological behaviour using rheometer, syringeability by texture analyser, water uptake and rate of implant formation by optical coherence tomography (OCT) microscope. Phase inversion in situ forming formulations were injected into PBS pH 7.3 to form an implant and release samples were collected and analysed for drug content using a HPLC method. All formulations exhibited good syringeability and rheological properties (viscosity: 0.19-3.06 Pa.s) by showing shear thinning behaviour which enable them to remain as free-flowing solution for ease administration. The results from OCT microscope demonstrated that thickness of the implants were increased with the increase in time and the rate of implant formation indicated the fast phase inversion. The drug release from implants was sustained over a period of 42 days. The research findings demonstrated that PLGA/NMP-based phase inversion in situ forming implants can improve compliance in patient's suffering from ocular diseases by sustaining the drug release for a prolonged period of time and thereby reducing the frequency of ocular injections.

Approach to Computer Implementation of Mathematical Model of 3-Phase Induction Motor

NASA Astrophysics Data System (ADS)

Pustovetov, M. Yu

2018-03-01

This article discusses the development of the computer model of an induction motor based on the mathematical model in a three-phase stator reference frame. It uses an approach that allows combining during preparation of the computer model dual methods: means of visual programming circuitry (in the form of electrical schematics) and logical one (in the form of block diagrams). The approach enables easy integration of the model of an induction motor as part of more complex models of electrical complexes and systems. The developed computer model gives the user access to the beginning and the end of a winding of each of the three phases of the stator and rotor. This property is particularly important when considering the asymmetric modes of operation or when powered by the special circuitry of semiconductor converters.

Availability of yttrium-90 from strontium-90: a nuclear medicine perspective.

PubMed

Chakravarty, Rubel; Dash, Ashutosh; Pillai, M R A

2012-12-01

Yttrium-90 (T(½) 64.1 hours, E(βmax)=2.28 MeV) is a pure β⁻ particle emitting radionuclide with well-established applications in targeted therapy. There are several advantages of ⁹⁰Y as a therapeutic radionuclide. It has a suitable physical half-life (∼64 hours) and decays to a stable daughter product ⁹⁰Zr by emission of high-energy β⁻ particles. Yttrium has a relatively simple chemistry and its suitability for forming complexes with a variety of chelating agents is well established. The ⁹⁰Sr/⁹⁰Y generator is an ideal source for the long-term continuous availability of no-carrier-added ⁹⁰Y suitable for the preparation of radiopharmaceuticals for radionuclide therapy. The parent radionuclide ⁹⁰Sr, which is a long-lived fission product, is available in large quantities from spent fuel. Several useful technologies have been developed for the preparation of ⁹⁰Sr/⁹⁰Y generators. There are several well-established radiopharmaceuticals based on monoclonal antibodies, peptides, and particulates labeled with ⁹⁰Y, that are in regular use for the treatment of some forms of primary cancers and arthritis. At present, there are no generators for the elution of ⁹⁰Y that can be set up in a hospital radiopharmacy. The radionuclide is procured from manufacturers and the radiopharmaceuticals are formulated on site. This article reviews the development of ⁹⁰Sr/⁹⁰Y generator and the development of ⁹⁰Y radiopharmaceuticals.

Templates of patient brochures for the preparation, administration and safe-handling of oral chemotherapy.

PubMed

Siden, Rivka; Kem, Ravie; Ostrenga, Andrew; Nicksy, Darcy; Bernhardt, Brooke; Bartholomew, Joy

2014-06-01

The increased use of oral chemotherapy for the treatment of cancer introduces new challenges for patients and caregivers. Among them are the ability to swallow oral solid dosage forms, the proper administration of the agents and the safe-handling of chemotherapeutic drugs in the home. Since these drugs are hazardous, proper preparation, administration, and disposition introduces a variety of safety issues. The increased toxicity of these drugs coupled with complicated dosing regimens and the occasional need to dilute the drug or measure a liquid dosage form require careful instruction of the patient and/or caregivers. The purpose of this project was to create templates for writing patient instruction brochures. A group of clinicians specializing in oncology from several institutions in the United States and Canada met through a series of conference calls. The group included pharmacists with a specialty in pediatric oncology, investigational drug pharmacists, and an oncology nurse practitioner. National guidelines and practices at each institution were used for the creation of templates to be used in developing templates for medication and formulation-specific instruction brochures. The group developed six templates. The templates ranged in scope from instructions on the administration of intact tablets or capsules to directions on opening capsules or crushing tablets and mixing the content with foods or liquids. Thirty-three drug-specific brochures were developed using the templates. Templates of patient brochures and drug-specific brochures on the safe handling of chemotherapy in the home can be created using a collaborative, multi-institutional approach.

New solid state forms of antineoplastic 5-fluorouracil with anthelmintic piperazine

NASA Astrophysics Data System (ADS)

Moisescu-Goia, C.; Muresan-Pop, M.; Simon, V.

2017-12-01

The aim of the present study was to asses the formation of solid forms between the 5-fluorouracil chemotherapy drug and the anthelmintic piperazine. Two new solid forms of antineoplastic agent 5-fluorouracil with anthelmintic piperazine were obtained by liquid assisted ball milling and slurry crystallization methods. The Nsbnd H hydrogen bonding donors and C = O hydrogen bonding acceptors of 5-fluorouracil allow to form co-crystals with other drugs delivering improved properties for medical applications, as proved for other compounds of pharmaceutical interest. Both new solid forms were investigated using X-ray powder diffraction (XRD), differential thermal analysis (DTA) and Fourier transform infrared (FTIR) spectroscopy. The XRD results show that by both methods were successfully synthesized new solid forms of 5-fluorouracil with piperazine. According to FTIR results the form prepared by lichid assisted grinding process was obtained as co-crystal and the other one, prepared by slurry method, resulted as a salt.

Research and Development for Continued Performance Improvement in Flexible a-Si PV

DTIC Science & Technology

2010-12-14

accomplished, however, at low temperatures silicides tend to form on the surface of the filament, which affected filament lifetime and deposition rate...considered. Titanium Nitride, sputtered As an alternative to the hot wire deposition of silicon, samples were prepared with various thicknesses of...Silicon 21 Insitu DC Sputtering Titanium Nitride 22 Metal Machine 2 ឈ> RF Oxygen Plasma Silicon Dioxide 20. Oxygen Etch Table A.4.1 Open circuit

SAS2H Generated Isotopic Concentrations For B&W 15X15 PWR Assembly (SCPB:N/A)

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.W. Davis

This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development Department (WPDD) to provide pressurized water reactor (PWR) isotopic composition data as a function of time for use in criticality analyses. The objectives of this evaluation are to generate burnup and decay dependant isotopic inventories and to provide these inventories in a form which can easily be utilized in subsequent criticality calculations.

A Partnership Training Program: Studying Targeted Drug Delivery Using Nanoparticles In Breast Cancer Diagnosis and Therapy

DTIC Science & Technology

2011-10-01

REPORT DATE : TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and Materiel Command...DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 2. REPORT TYPE 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE 5a...We have also developed transferrin attached protein nanospheres with silicon coating, doped with rare earth oxide and rhodamine B isothiocyanate

Salivary Proteomic and MicroRNA Biomarkers Development for Lung Cancer Detection

DTIC Science & Technology

2016-10-01

David T. Wong, DMD, DMSc CONTRACTING ORGANIZATION : University of California, Los Angeles Los Angeles, CA 90095 REPORT DATE: October 2016 TYPE OF...REPORT: Final PREPARED FOR: U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012 DISTRIBUTION STATEMENT: Approved for...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ORGANIZATION . 1. REPORT DATE (DD-MM-YYYY) October 31, 2016 2. REPORT

U.S. National Arctic Strategy: Preparing Defensive Lines of Effort for the Arctic

DTIC Science & Technology

2014-04-01

publications hint at new political posturing and suggest China should develop a more assertive approach to the international debates on controlling ...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 01-04-2014 2. REPORT TYPE...importance of the Arctic, but lacks the infrastructure, command and control structure, and Arctic-capable assets to meet national strategic objectives

An affinity chromatography-gel filtration device for preparing thyroid microsomal antigen.

PubMed

Wang, L; Zheng, W F

1987-09-24

On the basis of conventional differential centrifugation for preparing crude thyroid microsomal antigen (TMAg), we have employed Sepharose 4B gel filtration and affinity chromatography separately to study the elution pattern in terms of absorbance and antigenic activity. The result indicates that thyroglobulin (TG) exists in two forms in crude TMAg, i.e., 'free TG' and 'membrane-bound TG'. TMAg is present in two forms in the eluate: (1) the TM fragment or TMAg polymer, which is produced at a higher rate and has greater antigenic activity, but which is less pure; (2) soluble TMAg, which is produced at a lower rate and has less antigenic activity, but which is more pure. We have developed an affinity chromatography-gel filtration (AC-GF) device which is a combination of affinity chromatography and a Sepharose 4B column. Sephadex G-50 is placed between the rubber stopper and Sepharose 4B in the GF column to ensure intactness of the entire system. With such a device, the AC removes the contaminated TG from TM homogenate, and allows the latter to pass directly from AC to GF for rechromatography. This device extracts the full advantages of both methods and each compensates for any deficiency of the other. Using this one-step procedure, one has the greatest chance of removing TG and obtaining TM fragments of TMAg polymers of higher antigenic activity, as well as separating small amounts of more purified soluble TMAg. Thus, the newly developed method meets the need of large quantities of TMAg for practical application, and at the same time the more purified preparations can be used for analytical purposes.

Direct Compositional Characterization of (U,Th)O2 Powders, Microspheres, and Pellets Using TXRF.

PubMed

Dhara, Sangita; Prabhat, Parimal; Misra, N L

2015-10-20

A total reflection X-ray fluorescence (TXRF) analysis method for direct compositional characterization of sintered and green (U,Th)O2 samples in different forms (e.g., pellets, powders, and microspheres) without sample dissolution has been developed for the first time. The methodology involves transfer of only a few nanograms of the sample on the TXRF sample support by gently rubbing the samples on supports or taking their tiny uniform slurry in collodion on the sample support, drying them to make thin film, and measuring the TXRF spectra of the specimens thus prepared. This approach minimizes the matrix effects. Uranium determinations from the TXRF spectra of such specimens were made with respect to thorium, considering it as an internal standard. Samples having uranium atom percent (at%) from 0 to 100 in (U,Th)O2 were analyzed for uranium in comparison to thorium. The results showed an average precision of 2.6% (RSD, 2σ, n = 8). The TXRF-determined results deviated from expected values within 5%. The TXRF results were compared with those of biamperometry with good agreement. The lattice parameters of the solid solutions were calculated using their XRD patterns. A good correlation between lattice parameters and TXRF-determined U at% and between TXRF-determined U at% and expected U at%, calculated on the basis of preparation of (U,Th)O2 solid solutions, was obtained. The developed method is capable of analyzing (U,Th)O2 samples directly with almost negligible sample preparation and is well suited for radioactive samples. The present study suggests that this method can be extended for the determination of U,Th and Pu in other nuclear fuel materials (e.g., nitrides, carbides, etc.) in the form of pellets, powders, and microspheres after suitable modifications in sample handling procedure.

Poly(vinyl alcohol) composite films with high percent elongation prepared from amylose-fatty ammonium salt inclusion complexes

USDA-ARS?s Scientific Manuscript database

Amylose inclusion complexes prepared from cationic fatty ammonium salts and jet-cooked high amylose starch were combined with poly(vinyl alcohol) (PVOH) to form glycerol-plasticized films. Their tensile properties were compared with similar films prepared previously with analogous anionic fatty acid...

48 CFR 552.211-88 - Vehicle export preparation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Vehicle export preparation. 552.211-88 Section 552.211-88 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 552.211-88 Vehicle export preparation. As prescribed...

Dual responsive PNIPAM-chitosan targeted magnetic nanopolymers for targeted drug delivery

NASA Astrophysics Data System (ADS)

Yadavalli, Tejabhiram; Ramasamy, Shivaraman; Chandrasekaran, Gopalakrishnan; Michael, Isaac; Therese, Helen Annal; Chennakesavulu, Ramasamy

2015-04-01

A dual stimuli sensitive magnetic hyperthermia based drug delivery system has been developed for targeted cancer treatment. Thermosensitive amine terminated poly-N-isopropylacrylamide complexed with pH sensitive chitosan nanoparticles was prepared as the drug carrier. Folic acid and fluorescein were tagged to the nanopolymer complex via N-hydroxysuccinimide and ethyl-3-(3-dimethylaminopropyl)carbodiimide reaction to form a fluorescent and cancer targeting magnetic carrier system. The formation of the polymer complex was confirmed using infrared spectroscopy. Gadolinium doped nickel ferrite nanoparticles prepared by a hydrothermal method were encapsulated in the polymer complex to form a magnetic drug carrier system. The proton relaxation studies on the magnetic carrier system revealed a 200% increase in the T1 proton relaxation rate. These magnetic carriers were loaded with curcumin using solvent evaporation method with a drug loading efficiency of 86%. Drug loaded nanoparticles were tested for their targeting and anticancer properties on four cancer cell lines with the help of MTT assay. The results indicated apoptosis of cancer cell lines within 3 h of incubation.

Development of replicated optics for AXAF-1 XDA testing

NASA Technical Reports Server (NTRS)

Engelhaupt, Darell; Wilson, Michele; Martin, Greg

1995-01-01

Advanced optical systems for applications such as grazing incidence Wolter I x-ray mirror assemblies require extraordinary mirror surfaces in terms of fine finish and surface figure. The impeccable mirror surface is on the inside of the rotational mirror form. One practical method of producing devices with these requirements is to first fabricate an exterior surface for the optical device then replicate that surface to have the inverse component with lightweight characteristics. The replicated optic is not better than the master or mandrel from which it is made. This task identifies methods and materials for forming these extremely low roughness optical components. The objectives of this contract were to (1) prepare replication samples of electroless nickel coated aluminum, and determine process requirements for plating XDA test optic; (2) prepare and assemble plating equipment required to process a demonstration optic; (3) characterize mandrels, replicas and test samples for residual stress, surface contamination and surface roughness and figure using equipment at MSFC and; (4) provide technical expertise in establishing the processes, procedures, supplies and equipment needed to process the XDA test optics.

Morphology-controlled preparation of lead powders by electrodeposition from different PbO-containing choline chloride-urea deep eutectic solvent

NASA Astrophysics Data System (ADS)

Ru, Juanjian; Hua, Yixin; Xu, Cunying; Li, Jian; Li, Yan; Wang, Ding; Qi, Cancan; Jie, Yafei

2015-04-01

Lead powders with different morphologies, including corals, rods, wires, needles, ferns and dendritic forms, are prepared by electrodeposition onto a stainless steel substrate from different PbO-containing (10-60 mM) choline chloride-urea deep eutectic solvent at cell voltage 2.5 V and 343 K for 2 h. The electrochemical behavior of the PbO dissolved in this solvent is investigated with cyclic voltammetry. It is demonstrated that the increasing of PbO concentration makes the reduction potential EPb(II)/Pb shift positively and facilitates the electrodeposition of lead from PbO in the deep eutectic solvent. According to the analysis of the morphological and crystallographic characteristics of lead powders, the predominant origin of the growth layers is turned away from centre type towards the edge and corner types with the increase in PbO concentration. Due to the large number of growth centres at higher PbO concentration, fine and irregular grains are observed on the surface of formed particles which results in the development of primary and secondary branches in dendrites.

New Approach for the Development of Improved Traditional Medicine: Case of a Preparation of an Oral Hypoglycemic Medicine from Laportea ovalifolia (Schumach. & Thonn.) Chew. (Urticaceae).

PubMed

Tsabang, Nolé; Kadjob, Stella; Mballa, Rose N; Yedjou, Clement G; Nnanga, Nga; Donfagsiteli, Néhémie T; Tchinda, Alembert T; Agbor, Gabriel A; Ntsama, Claudine; Tchounwou, Paul B

2015-08-01

A majority of Africans rely on traditional medicine as the primary form of health care. Yet most traditional medicine products have a short shelf life, especially for water-based formulations such as macerations, infusions and decoctions. Indeed, many of these water extracts become unfit for human consumption after five to seven days of conservation either because of the degradation or toxicity of active components, and/or the growth of pathogenic organisms. The purpose of this study was to describe and apply a new approach for the development of an improved traditional medicine (ITM) that is cheap, very efficient, not toxic, and easy to produce, and that can be conserved for a longer time without a significant loss of activity. Hence, Laportea ovalifolia was selected from an ethnobotanical prospection in all regions of Cameroon, and was used to prepare an oral hypoglycemic product. This preparation required 9 steps focused on the characterization of the plant species, and the standardization of the ethnopharmacological preparation by a multidisciplinary team of scientists with expertise in botany, ecology, pharmacognosy and pharmacology. Resultantly, four galenic formulations of hypoglycemic medications were produced. A relationship between these four formulations was described as follow: One spoon of oral suspension (10 ml)=one sachet of powder=2 tablets=3 capsules. Hence, our research provides new insight into a drug discovery approach that could alleviate the major problems affecting traditional medicine and enhance its effectiveness in addressing health care in developing and undeveloped countries.

An Improved Method for Generating Consistent Soluble Amyloid-beta Oligomer Preparations for In Vitro Neurotoxicity Studies

PubMed Central

Ryan, Deborah A.; Narrow, Wade C.; Federoff, Howard J.; Bowers, William J.

2010-01-01

Soluble Aβ oligomers are recognized as playing a key role in Alzheimer’s disease (AD) pathophysiology. Despite their significance, many investigators encounter difficulty generating reliable preparations for in vitro and in vivo experiments. Solutions of Aβ are often unstable and soluble conformer profiles inconsistent. In this study we describe detailed methods for preparing Aβ oligomers that are stable for several weeks and are enriched for low and high molecular weight oligomeric forms, including the 56-kDa form, a conformer implicated in AD-related cognitive impairment. We characterize their structural and functional properties using Western blot, dot blot, atomic force microscopy, Thioflavine T fluorescence, and primary neuronal culture toxicity assays. These synthetic preparations should prove valuable to many studying Aβ-mediated mechanisms underlying AD. PMID:20452375

Preparation and antioxidant properties of selenium nanoparticles-loaded chitosan microspheres.

PubMed

Bai, Kaikai; Hong, Bihong; He, Jianlin; Hong, Zhuan; Tan, Ran

2017-01-01

Selenium nanoparticles (SeNPs), as a special form of selenium (Se) supplement, have attracted worldwide attention due to their favorable properties and unique bioactivities. Herein, an eco-friendly and economic way to prepare stable SeNPs is introduced. SeNPs were synthesized in aqueous chitosan (CTS) and then embedded into CTS microspheres by spray-drying, forming selenium nanoparticles-loaded chitosan microspheres (SeNPs-M). The physicochemical properties including morphology, elemental state, size distribution and surface potential were investigated. Institute of Cancer Research mice were used as model animal to evaluate the bioactivities of SeNPs-M. Trigonal-phase SeNPs of ~35 nm were synthesized, and SeNPs-M physically embedding those SeNPs were successfully prepared. Amazingly, acute toxicity test indicated that SeNPs-M were much safer than selenite in terms of Se dose, with a LD 50 of around 18-fold of that of selenite. In addition, SeNPs-M possessed powerful antioxidant activities, as evidenced by a dramatic increase of both Se retention and the levels of glutathione peroxidase, superoxide dismutase and catalase. The design of SeNPs-M can offer a new way for further development of SeNPs with a higher efficacy and better biosafety. Thus, SeNPs-M may be a potential candidate for further evaluation as an Se supplement with antioxidant properties and be used against Se deficiency in animals and human beings.

Preparation and antioxidant properties of selenium nanoparticles-loaded chitosan microspheres

PubMed Central

Bai, Kaikai; Hong, Bihong; He, Jianlin; Hong, Zhuan; Tan, Ran

2017-01-01

Selenium nanoparticles (SeNPs), as a special form of selenium (Se) supplement, have attracted worldwide attention due to their favorable properties and unique bioactivities. Herein, an eco-friendly and economic way to prepare stable SeNPs is introduced. SeNPs were synthesized in aqueous chitosan (CTS) and then embedded into CTS microspheres by spray-drying, forming selenium nanoparticles-loaded chitosan microspheres (SeNPs-M). The physicochemical properties including morphology, elemental state, size distribution and surface potential were investigated. Institute of Cancer Research mice were used as model animal to evaluate the bioactivities of SeNPs-M. Trigonal-phase SeNPs of ~35 nm were synthesized, and SeNPs-M physically embedding those SeNPs were successfully prepared. Amazingly, acute toxicity test indicated that SeNPs-M were much safer than selenite in terms of Se dose, with a LD50 of around 18-fold of that of selenite. In addition, SeNPs-M possessed powerful antioxidant activities, as evidenced by a dramatic increase of both Se retention and the levels of glutathione peroxidase, superoxide dismutase and catalase. The design of SeNPs-M can offer a new way for further development of SeNPs with a higher efficacy and better biosafety. Thus, SeNPs-M may be a potential candidate for further evaluation as an Se supplement with antioxidant properties and be used against Se deficiency in animals and human beings. PMID:28684913

[How to adapt to the requirements of "clinical value-oriented drug innovation" for pharmaceutical research in application process of new traditional Chinese medicine].

PubMed

Jin, Fang

2017-05-01

On August 9, 2015, the State Council promulgated the "Opinions of the State Council on the reform of drug and medical device review and approval system" (Guofa 2015 No. 44), and established the "clinical value-oriented drug innovation" model to encourage the research and development of new drugs. Following that, China Food and Drug Administration (CFDA) promulgated the "Notice on several policies for drug registration review and approval" (2015 No. 230 ) on November 11, 2015, clearly specifying that CFDA would "implement one-time approval for clinical trials application of the new drugs, and no longer take a phased declaration, review and approval system; for the new drugs that apply for clinical trials, mainly review the scientific natureof the clinical protocols and the risk control of the new drugs to guarantee the safety of subjects". Accordingly, the evaluation ideas and forms of new drug registration have also been adjusted greatly. For example, issues like the rationality of the drug manufacturing process, whether the scale can reflect the stability of the process, whether the preparation process is sufficient, and whether the choice of dosage form is reasonable are no longer the focus of evaluation before clinical trials. Issues regarding whether the preparation process design is reasonable, whether the effective components can be transferred to the preparation to a maximum extent, whether the process parameters determined in small and middle pilot trials can adapt to the requirements of mass production, no longer act as the reasons for refusing the clinical trials. The corresponding risks shall be borne by the applicant as the subject of liability. The focus in registration evaluation is mainly transferred to how to ensure the consistence of quality between clinical trial samples and the samples already available on market by guaranteeing stable sources of drug raw materials and stable quality of medicines as well as control of the whole preparation process. These issues run through the whole process of new drug development, but also have different focuses in different stages. According to the "Measures on communicating about drug research and development and technical review" (2016 No. 94) (On Trial) issued by CFDA on June 2, 2016, the applicants may communicate with the drug evaluation center in different phases in the process of new drugs registration in respects of medicine material problems, technological problems, and quality control of the preparations. In this paper, the transformation of Chinese medicine research model was described mainly in the following aspects: how to control the quality of medicines from origins, technology design of the preparation and technology process research, and how to establish whole-process quality system. The paper also reflects the concept that the quality of new Chinese drugs research and development comes from design. Copyright© by the Chinese Pharmaceutical Association.

A Method for Quantifying, Visualising, and Analysing Gastropod Shell Form

PubMed Central

Liew, Thor-Seng; Schilthuizen, Menno

2016-01-01

Quantitative analysis of organismal form is an important component for almost every branch of biology. Although generally considered an easily-measurable structure, the quantification of gastropod shell form is still a challenge because many shells lack homologous structures and have a spiral form that is difficult to capture with linear measurements. In view of this, we adopt the idea of theoretical modelling of shell form, in which the shell form is the product of aperture ontogeny profiles in terms of aperture growth trajectory that is quantified as curvature and torsion, and of aperture form that is represented by size and shape. We develop a workflow for the analysis of shell forms based on the aperture ontogeny profile, starting from the procedure of data preparation (retopologising the shell model), via data acquisition (calculation of aperture growth trajectory, aperture form and ontogeny axis), and data presentation (qualitative comparison between shell forms) and ending with data analysis (quantitative comparison between shell forms). We evaluate our methods on representative shells of the genera Opisthostoma and Plectostoma, which exhibit great variability in shell form. The outcome suggests that our method is a robust, reproducible, and versatile approach for the analysis of shell form. Finally, we propose several potential applications of our methods in functional morphology, theoretical modelling, taxonomy, and evolutionary biology. PMID:27280463

Method for preparing radionuclide-labeled chelating agent-ligand complexes

DOEpatents

Meares, Claude F.; Li, Min; DeNardo, Sally J.

1999-01-01

Radionuclide-labeled chelating agent-ligand complexes that are useful in medical diagnosis or therapy are prepared by reacting a radionuclide, such as .sup.90 Y or .sup.111 In, with a polyfunctional chelating agent to form a radionuclide chelate that is electrically neutral; purifying the chelate by anion exchange chromatography; and reacting the purified chelate with a targeting molecule, such as a monoclonal antibody, to form the complex.

Metal phthalocyanine polymers

NASA Technical Reports Server (NTRS)

Achar, B. N.; Fohlen, G. M.; Parker, J. A. (Inventor)

1984-01-01

Metal 4, 4', 4", 4"'=tetracarboxylic phthalocyanines (MPTC) are prepared by reaction of trimellitic anhydride, a salt or hydroxide of the desired metal (or the metal in powdered form), urea and a catalyst. A purer form of MPTC is prepared than heretofore. These tetracarboxylic acids are then polymerized by heat to sheet polymers which have superior heat and oxidation resistance. The metal is preferably a divalent metal having an atomic radius close to 1.35A.

Investigation of americium-241 metal alloys for target applications. [Alloys with cerium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conner, W.V.

1980-01-01

Several americium-241 metal alloys have been investigated for possible use in the Lawrence Livermore National Laboratory Radiochemical Diagnostic Tracer Program. Alloys investigated have included uranium-americium, aluminum-americium, and cerium-americium. Uranium-americium alloys with the desired properties proved to be difficult to prepare, and work with this alloy was discontinued. Aluminum-americium alloys were much easier to prepare, but the alloy consisted of an aluminum-americium intermetallic compound (AmAl/sub 4/) in an aluminum matrix. This alloy could be cast and formed into shapes, but the low density of aluminum, and other problems; made the alloy unsuitable for the intended application. Americium metal was found tomore » have a high solid solubility in cerium and alloys prepared from these two elements exhibited all of the properties desired for the tracer program application. Cerium-americium alloys containing up to 34 wt % americium have been prepared using both comelting and coreduction techniques. The latter technique involves coreduction of Ce F/sub 4/ and AmF/sub 4/ with calcium metal in a sealed reduction vessel. Casting techniques have been developed for preparing up to eight 0.87 inch (2.2 cm) diameter disks in a single casting, and cerium-americium metal alloy disks containing from 10 to 25 wt % americium-241 have been prepared using these techniques.« less

Production and investigation of thin films of metal actinides (Pu, Am, Cm, Bk, Cf)

NASA Astrophysics Data System (ADS)

Radchenko, V. M.; Ryabinin, M. A.; Stupin, V. A.

2010-03-01

Under limited availability of transplutonium metals some special techniques and methods of their production have been developed that combine the process of metal reduction from a chemical compound and preparation of a sample for examination. In this situation the evaporation and condensation of metal onto a substrate becomes the only possible technology. Thin film samples of metallic 244Cm, 248Cm and 249Bk were produced by thermal reduction of oxides with thorium followed by deposition of the metals in the form of thin layers on tantalum substrates. For the production of 249Cf metal in the form of a thin layer the method of thermal reduction of oxide with lanthanum was used. 238Pu and 239Pu samples in the form of films were prepared by direct high temperature evaporation and condensation of the metal onto a substrate. For the production of 241Am films a gram sample of plutonium-241 metal was used containing about 18 % of americium at the time of production. Thermal decomposition of Pt5Am intermetallics in vacuum was used to produce americium metal with about 80% yield. Resistivity of the metallic 249Cf film samples was found to decrease exponentially with increasing temperature. The 249Cf metal demonstrated a tendency to form preferably a DHCP structure with the sample mass increasing. An effect of high specific activity on the crystal structure of 238Pu nuclide thin layers was studied either.

8 CFR 1299.1 - Use of immigration forms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1299.1 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE NATIONALITY REGULATIONS IMMIGRATION REVIEW FORMS § 1299.1 Use of immigration forms. In addition to forms prepared by the Executive Office for Immigration Review, the Executive Office for Immigration Review...

Facile preparation of organic-silica hybrid monolith for capillary hydrophilic liquid chromatography based on "thiol-ene" click chemistry.

PubMed

Chen, Ming-Luan; Zhang, Jun; Zhang, Zheng; Yuan, Bi-Feng; Yu, Qiong-Wei; Feng, Yu-Qi

2013-04-05

In this work, a one-step approach to facile preparation of organic-inorganic hybrid monoliths was successfully developed. After vinyl-end organic monomers and azobisisobutyronitrile (AIBN) were mixed with hydrolyzed tetramethoxysilane (TMOS) and 3-mercaptopropyltrimethoxysilane (MPTMS), the homogeneous mixture was introduced into a fused-silica capillary for simultaneous polycondensation and "thiol-ene" click reaction to form the organic-silica hybrid monoliths. By employing this strategy, two types of organic-silica hybrid monoliths with positively charged quaternary ammonium and amide groups were prepared, respectively. The functional groups were successfully introduced onto the monoliths during the sol-gel process with "thiol-ene" click reaction, which was demonstrated by ζ-potential assessment, energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FT-IR) spectroscopy. The porous structure of the prepared monolithic columns was examined by scanning electron microscopy (SEM), nitrogen adsorption-desorption measurement, and mercury intrusion porosimetry. These results indicate the prepared organic-silica hybrid monoliths possess homogeneous column bed, large specific surface area, good mechanical stability, and excellent permeability. The prepared monolithic columns were then applied for anion-exchange/hydrophilic interaction liquid chromatography. Different types of analytes, including benzoic acids, inorganic ions, nucleosides, and nucleotides, were well separated with high column efficiency around 80,000-130,000 plates/m. Taken together, we present a facile and universal strategy to prepare organic-silica hybrid monoliths with a variety of organic monomers using one-step approach. Copyright © 2013 Elsevier B.V. All rights reserved.

[Research on survey analysis and development strategies of traditional Chinese preparations in Guangdong Province hospitals].

PubMed

Wang, Wen-ming; Yan, Zhen; Liu, Han-jiang; Zhang, Lei-hong; Xia, Li; Zhao, Zhen-dong

2013-12-01

To provide reference for the government to formulate policies and medical institution to formulate development plan, the present situation of medical institutions of traditional Chinese preparation and some countermeasures for developing the research of traditional Chinese preparation in Guangdong province were studied. Combined with development situation of traditional Chinese preparation of medical institutions in Guangdong province in recent years, the development countermeasure of traditional Chinese preparation was discussed. In order to promote the development of traditional Chinese preparation of medical institutions, suggestions and countermeasures for the government and related departments were proposed. Government departments should formulate policies to support the development of traditional Chinese preparation, the medical institutions should make scientific development planning, strengthen the construction of hardware and software and develop special traditional Chinese preparation to promote the healthy development of traditional Chinese preparation.

An approach to shortening the timeframe between the emergence of new compounds on the drugs market and the availability of reference standards: The microscale syntheses of nitrazolam and clonazolam for use as reference materials, utilizing polymer-supported reagents.

PubMed

Dowling, Geraldine; Kavanagh, Pierce V; Eckhardt, Hans-Georg; Twamley, Brendan; Hessman, Gary; McLaughlin, Gavin; O'Brien, John; Brandt, Simon D

2018-03-15

Nitrazolam and clonazolam are 2 designer benzodiazepines available from Internet retailers. There is growing evidence suggesting that such compounds have the potential to cause severe adverse events. Information about tolerability in humans is scarce but typically, low doses can be difficult to administer for users when handling bulk material. Variability of the active ingredient in tablet formulations can also be of a concern. Customs, toxicology and forensic laboratories are increasingly encountering designer benzodiazepines, both in tablet and powdered form. The unavailability of reference standards can impact on the ability to identify these compounds. Therefore, the need arises for exploring in-house approaches to the preparation of new psychoactive substances (NPS) that can be carried out in a timely manner. The present study was triggered when samples of clonazolam were received in powdered and tablet form at a time when reference material for this drug was commercially unavailable. Therefore, microscale syntheses of clonazolam and its deschloro analog nitrazolam were developed utilizing polymer-supported reagents starting from 2-amino-2'-chloro-5-nitrobenzophenone (clonazolam) and 2-amino-5-nitrobenzophenone (nitrazolam). The final reaction step forming the 1,2,4-triazole ring moiety was performed within a gas chromatography-mass spectrometry (GC-MS) injector. A comparison with a preparative scale synthesis of both benzodiazepine derivatives showed that microscale synthesis might be an attractive option for a forensic laboratory in terms of time and cost savings when compared with traditional methods of synthesis and when qualitative identifications are needed to direct forensic casework. The reaction by-product profiles for both the micro and the preparative scale syntheses are also presented. Copyright © 2018 John Wiley & Sons, Ltd.

Electrochromic TiO2 Thin Film Prepared by Dip-Coating Technique

NASA Astrophysics Data System (ADS)

Suriani, S.; Kamisah, M. M.

2002-12-01

Titanium dioxide (TiO2) thin films were prepared by using sol-gel dip coating technique. The coating solutions were prepared by reacting titanium isopropoxide as precursors and ethanol as solvent. The films were formed on transparent ITO-coated glass by a dip coating technique and final dried at various temperatures up to 600 °C for 30 minutes. The films were characterized with the UV-Vis-NIR Spectrometer, Scanning Electron Microscopy (SEM) and X-ray diffractometer (XRD). XRD results show that the films dried at 600 °C form anatase structure. From the spectroscopic studies, the sample shows electrochromic property.

76 FR 77592 - Proposed Collection; Comment Request for Form 14242

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

... Number: Form 14242. Abstract: The IC form is used to report an abusive tax avoidance scheme and tax return preparers who promote such schemes. IC is collected to combat abusive tax promoters. Respondents...

76 FR 57803 - Proposed Collection; Comment Request for Form 14242

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Number: Form 14242. Abstract: The IC form is used to report an abusive tax avoidance scheme and tax return preparers who promote such schemes. IC is collected to combat abusive tax promoters. Respondents...

Study on preparation and formation mechanism of n-alkanol/water emulsion using alpha-cyclodextrin.

PubMed

Hashizaki, Kaname; Kageyama, Takashi; Inoue, Motoki; Taguchi, Hiroyuki; Ueda, Haruhisa; Saito, Yoshihiro

2007-11-01

Surfactants are usually used for the preparation of emulsions; however, some have an adverse effect on the human body such as skin irritation, hemolysis, and protein denaturation, etc. In this study, we examined the preparation and formation mechanism of n-alkanol/water emulsions using alpha-cyclodextrin (alpha-CD) as an emulsifier. Emulsions were prepared by mixing oil and water phases for 4 min at 2500 rpm using a vortex mixer. The mechanism of emulsification was investigated with some physico-chemical techniques. From phase diagrams of n-alkanol/alpha-CD/water systems, the emulsion phase extended as the chain length of n-alkanols and the amount of alpha-CD added increased. Furthermore, the emulsion was not formed in the region where the n-alkanol/alpha-CD complex didn't precipitate; however, the emulsion was formed in the region where the complex precipitated. In addition, it was clear that the emulsions have a yield stress value and correspond to the Maxwell model from rheological measurement. Our experiments clearly showed that the stable emulsions are formed because the precipitated complexes form a dense film at the oil-water interface and prevent aggregation among dispersed phases. Furthermore, it is suggested that the creation of a three-dimensional network structure formed by precipitated complexes in the continuous phase contributes to the stabilization of the emulsion. Thus, we concluded that the n-alkanol/water emulsions using alpha-cyclodextrin were a kind of the Pickering emulsion.

Study of formulation of mild pharmaceutical forms of paracetamol in medical practice.

PubMed

Abdullahu, Bedri; Morina, Naim; Islami, Hilmi

2012-01-01

Paracetamol is one of the most used antipyretic- analgesic preparation, which can be found in different pharmaceutical forms and in different doses. Due to its wide utilization in the clinical practice, determination of paracetamol in pharmaceutical formulation is of a great importance since that over dosage with paracetamol may cause the hepatic fulminant necroses and other toxic effects. Study has included two formulations of paracetamol suppositories with doses of 125 mg widely used in the paediatric practice. Suppositories prepared according to these two formulations by the melting method and spilling into forms was subject to the quality control by implementing a series of trials and analyses for that aim, such are: reactions of identification, average mass, disintegration time, and homogeneity whilst quantitative determination was performed by applying two methods of instrumental analyze: spectrophotometry in UV zone and cromatography in liquid phase with high pressure. Results of these analyses, performed immediately following the preparation and 3 months after the preparation, showed that content of paracetamol in both of two formulations is within the norms of Pharmacopoeia. Suppositories of paracetamol in doses of 125 mg prepared as per formulation 1 are to be considered as more appropriate because it contains semi synthetic glycerides as excipient which has better features than other suppository excipients.

Quality and stability of extemporaneous pyridoxal phosphate preparations used in the treatment of paediatric epilepsy.

PubMed

Mohamed-Ahmed, Abeer H A; Wilson, Matthew P; Albuera, Maedelyn; Chen, Ting; Mills, Philippa B; Footitt, Emma J; Clayton, Peter T; Tuleu, Catherine

2017-04-01

To assess the pyridoxal 5'-phosphate (PLP) content and stability of extemporaneous PLP liquids prepared from dietary supplements used for the treatment of vitamin B 6 -dependent epilepsy. Pyridoxal 5'-phosphate liquids were prepared in accordance with the guidelines given to patients from marketed 50 mg PLP dietary capsules and tablets. The PLP content and its stability were evaluated under conditions resembling the clinical setting using reverse phase HPLC and mass spectrometry. Pyridoxal 5'-phosphate content in most of the extemporaneously prepared liquids from dietary supplements was found to be different from the expected amount (~16-60 mg). Most of these PLP extemporaneous liquids were stable at room temperature (protected from light) after 24 h but unstable after 4 h when exposed to light. A key photodegradation product of PLP in water was confirmed as 4-pyridoxic acid 5'-phosphate (PAP). Pyridoxal 5'-phosphate tablets from Solgar ® were found to be the most reliable product for the preparation of extemporaneous PLP liquids. This work highlighted the difference between the marketed PLP dietary supplements quality and the importance of proper storage of aqueous PLP. There is a need to develop pharmaceutical forms of PLP that ensure dose accuracy and avoid potentially unsafe impurities with the aim of enhancing safety and compliance. © 2017 Royal Pharmaceutical Society.

Study on room temperature gas-sensing performance of CuO film-decorated ordered porous ZnO composite by In2O3 sensitization

NASA Astrophysics Data System (ADS)

Li, Tian-tian; Bao, Na; Geng, Ai-fang; Yu, Hui; Yang, Ying; Dong, Xiang-ting

2018-02-01

For the first time, ordered mesoporous ZnO nanoparticles have been synthesized by a template method. The electroplating after chemical plating method was creatively used to form copper film on the surface of the prepared ZnO, and then a CuO film-decorated ordered porous ZnO composite (CuO/ZnO) was obtained by a high-temperature oxidation method. In2O3 was loaded into the prepared CuO film-ZnO by an ultrasonic-assisted method to sensitize the room temperature gas-sensing performance of the prepared CuO/ZnO materials. The doped In2O3 could effectively improve the gas-sensing properties of the prepared materials to nitrogen oxides (NOx) at room temperature. The 1% In2O3 doped CuO/ZnO sample (1 wt% In2O3-CuO/ZnO) showed the best gas-sensing properties whose response to 100 ppm NOx reached 82%, and the detectable minimum concentration reached 1 ppm at room temperature. The prepared materials had a good selectivity, better response, very low detection limit, and high sensitivity to NOx gas at room temperature, which would have a great development space in the gas sensor field and a great research value.

Preparation and stability of extemporaneous oral liquid formulations of oseltamivir using commercially available capsules.

PubMed

Winiarski, Aleksander P; Infeld, Martin H; Tscherne, Ronald; Bachynsky, Maria; Rucki, Richard; Nagano-Mate, Kathy

2007-01-01

To develop a simple, standardized method for the extemporaneous compounding of an oral liquid form of oseltamivir from commercially available Tamiflu 75 mg capsules (Roche Pharmaceuticals) and to determine the stability of oseltamivir in this preparation. Chemical and microbial stability study. Laboratory. None. Extemporaneous oral liquid formulations of oseltamivir (15 mg/mL) were prepared in Cherry Syrup (Humco) and Ora-Sweet SF (Paddock Laboratories) using methods consistent with current compounding practice in a pharmacy setting. Preparations were stored in amber glass and amber polyethyleneterephthalate bottles at 5 degrees C +/- 2 degrees C (41 degrees F +/- 4 degrees F) and 25 degrees C +/- 2 degrees C (77 degrees F +/- 4 degrees F) at 60% +/- 5% relative humidity (RH) for 35 days and 30 degrees C +/- 2 degrees C (86 degrees F +/- 4 degrees F) at 65% +/- 5% RH for 13 days. Samples were monitored for appearance, pH, assay, degradation products, and microbiologic stability. The Cherry Syrup preparation, in either bottle type, was stable for up to 35 days under refrigeration (5 degrees C) and up to 5 days at room temperature (25 degrees C). It was not stable when stored at 30 degrees C for 5 days. The Ora-Sweet SF preparation was stable for up to 35 days at 5 degrees C or 25 degrees C and for up to 13 days at 30 degrees C in either bottle type. Both preparations maintained microbiologic stability for 35 days. Both preparations are stable under the described conditions and may provide an option in situations where the marketed suspension is unavailable.

“Smart” Materials Based on Cellulose: A Review of the Preparations, Properties, and Applications

PubMed Central

Qiu, Xiaoyun; Hu, Shuwen

2013-01-01

Cellulose is the most abundant biomass material in nature, and possesses some promising properties, such as mechanical robustness, hydrophilicity, biocompatibility, and biodegradability. Thus, cellulose has been widely applied in many fields. “Smart” materials based on cellulose have great advantages—especially their intelligent behaviors in reaction to environmental stimuli—and they can be applied to many circumstances, especially as biomaterials. This review aims to present the developments of “smart” materials based on cellulose in the last decade, including the preparations, properties, and applications of these materials. The preparations of “smart” materials based on cellulose by chemical modifications and physical incorporating/blending were reviewed. The responsiveness to pH, temperature, light, electricity, magnetic fields, and mechanical forces, etc. of these “smart” materials in their different forms such as copolymers, nanoparticles, gels, and membranes were also reviewed, and the applications as drug delivery systems, hydrogels, electronic active papers, sensors, shape memory materials and smart membranes, etc. were also described in this review. PMID:28809338

Direct organocatalytic enantioselective functionalization of SiOx surfaces.

PubMed

Parkin, John David; Chisholm, Ross; Frost, Aileen B; Bailey, Richard G; Smith, Andrew David; Hähner, Georg

2018-06-05

Traditional methods to prepare chiral surfaces involve either the adsorption of a chiral molecule onto an achiral surface, or adsorption of a species that forms a chiral template creating lattices with long range order. To date only limited alternative strategies to prepare chiral surfaces have been studied. In this manuscript a "bottom up" approach is developed that allows the preparation of chiral surfaces by direct enantioselective organocatalysis on a functionalized Si-oxide supported self-assembled monolayer (SAM). The efficient catalytic generation of enantiomerically enriched organic surfaces is achieved using a commercially available homogeneous isothiourea catalyst (HyperBTM) that promotes an enantioselective Michael-lactonization process upon a Si-oxide supported self-assembled monolayer functionalized with a reactive trifluoroenone group. Chiral atomic force microscopy (chi-AFM) is used to probe the enantiomeric enrichment of the organic films by measurement of the force distributions arising from interaction of D- or L-cysteine modified AFM tips and the organic films. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The preparation of students of medical faculties and other public colleges for educative activities within the national programme of health support.

PubMed

Kukurova, E; Bernadic, M; Kralova, E; Bernadicova, H; Traubner, P

2005-01-01

The tradition of education of physicians at the Medical Faculty of Comenius University (MFCU) has been developing for more than 85 years. Currently, the education has been widened by non-medical fields of study (nursing, obstetrical assistance, rehabilitation, public health care and laboratory and examination methods). After joining EU, the accreditation study programmes have been subject to transformation in compliance with current world trends in education. In accord with the transformation of content and forms of medical physics training, the authors demonstrate the main objectives and goals of this process. The goal is to prepare the graduates on high theoretical and practical levels, to teach them to work in team, and to prepare them for whole-life education. Practical skills in pre-clinical and clinical disciplines are being strengthened. One of the important outputs of pre-graduate education is the readiness of graduates for educative activities in favour of the National Programme of Health Support. (Tab. 1, Fig. 1, Ref. 7.)

I-NERI-2007-004-K, DEVELOPMENT AND CHARACTERIZATION OF NEW HIGH-LEVEL WASTE FORMS FOR ACHIEVING WASTE MINIMIZATION FROM PYROPROCESSING

DOE Office of Scientific and Technical Information (OSTI.GOV)

S.M. Frank

Work describe in this report represents the final year activities for the 3-year International Nuclear Energy Research Initiative (I-NERI) project: Development and Characterization of New High-Level Waste Forms for Achieving Waste Minimization from Pyroprocessing. Used electrorefiner salt that contained actinide chlorides and was highly loaded with surrogate fission products was processed into three candidate waste forms. The first waste form, a high-loaded ceramic waste form is a variant to the CWF produced during the treatment of Experimental Breeder Reactor-II used fuel at the Idaho National Laboratory (INL). The two other waste forms were developed by researchers at the Korean Atomicmore » Energy Research Institute (KAERI). These materials are based on a silica-alumina-phosphate matrix and a zinc/titanium oxide matrix. The proposed waste forms, and the processes to fabricate them, were designed to immobilize spent electrorefiner chloride salts containing alkali, alkaline earth, lanthanide, and halide fission products that accumulate in the salt during the processing of used nuclear fuel. This aspect of the I-NERI project was to demonstrate 'hot cell' fabrication and characterization of the proposed waste forms. The outline of the report includes the processing of the spent electrorefiner salt and the fabrication of each of the three waste forms. Also described is the characterization of the waste forms, and chemical durability testing of the material. While waste form fabrication and sample preparation for characterization must be accomplished in a radiological hot cell facility due to hazardous radioactivity levels, smaller quantities of each waste form were removed from the hot cell to perform various analyses. Characterization included density measurement, elemental analysis, x-ray diffraction, scanning electron microscopy and the Product Consistency Test, which is a leaching method to measure chemical durability. Favorable results from this demonstration project will provide additional options for fission product immobilization and waste management associated the electrochemical/pyrometallurgical processing of used nuclear fuel.« less

Catalytic Kinetic Resolution of Saturated N-Heterocycles by Enantioselective Amidation with Chiral Hydroxamic Acids.

PubMed

Kreituss, Imants; Bode, Jeffrey W

2016-12-20

The preparation of enantioenriched chiral compounds by kinetic resolution dates back to the laboratories of Louis Pasteur in the middle of the 19th century. Unlike asymmetric synthesis, this process can always deliver enantiopure material (ee > 99%) if the reactions are allowed to proceed to sufficient conversion and the selectivity of the process is not unity (s > 1). One of the most appealing and practical variants is acylative kinetic resolution, which affords easily separable reaction products, and several highly efficient enzymatic and small molecule catalysts are available. Unfortunately, this method is applicable to limited substrate classes such as alcohols and primary benzylamines. This Account focuses on our work in catalytic acylative kinetic resolution of saturated N-heterocycles, a class of molecules that has been notoriously difficult to access via asymmetric synthesis. We document the development of hydroxamic acids as suitable catalysts for enantioselective acylation of amines through relay catalysis. Alongside catalyst optimization and reaction development, we present mechanistic studies and theoretical calculation accounting for the origins of selectivity and revealing the concerted nature of many amide-bond forming reactions. Immobilization of the hydroxamic acid to form a polymer supported reagent allows simplification of the experimental setup, improvement in product purification, and extension of the substrate scope. The kinetic resolutions are operationally straight forward: reactions proceed at room temperature and open to air conditions, without generation of difficult-to-remove side products. This was utilized to achieve decagram scale resolution of antimalarial drug mefloquine to prepare more than 50 g of (+)-erythro-meflqouine (er > 99:1) from the racemate. The immobilized quasienantiomeric acyl hydroxamic acid reagents were also exploited for a rare practical implementation of parallel kinetic resolution that affords both enantiomers of the amine products in high enantiopurity. The success of this process relied on identification of two cleavable acyl groups alongside implementation of flow-chemistry techniques to ensure reusability of the resolving agents. The work discussed in this Account has laid foundations for new catalyst design as well as development of desymmetrization and dynamic kinetic resolution processes. In the meantime, as all the requisite reagents are commercially available, we hope that hydroxamic acid promoted acylative kinetic resolution will become a method of choice for preparation of saturated N-heterocycles in enantiopure form.

Preliminary description of the area navigation software for a microcomputer-based Loran-C receiver

NASA Technical Reports Server (NTRS)

Oguri, F.

1983-01-01

The development of new software implementation of this software on a microcomputer (MOS 6502) to provide high quality navigation information is described. This software development provides Area/Route Navigation (RNAV) information from Time Differences (TDs) in raw form using an elliptical Earth model and a spherical model. The software is prepared for the microcomputer based Loran-C receiver. To compute navigation infomation, a (MOS 6502) microcomputer and a mathematical chip (AM 9511A) were combined with the Loran-C receiver. Final data reveals that this software does indeed provide accurate information with reasonable execution times.

Navies in Asia: A Survey of the Development of Ten Navies in South and South East Asia, 1945-1992

DTIC Science & Technology

1992-11-01

benefits to Britain. The Admiralty, in the case of the Canadian, Australian and New Zealand Navies, was prepared to "carry" developments in these...the British and even a tour of Australia and New Zealand but Pakistan was also beginning to look in other directions. In November 1950 an Iranian...of the mouth of the Hariabhanga River in the Bay of Bengal. This island was a "char", a body of land formed by new silt deposits in the wake of a 1970

Biomimetics in thin film design: Niche-like wrinkles designed for i-cell progenitor cell differentiation.

PubMed

Major, Roman; Lackner, Juergen M; Sanak, Marek; Major, Boguslaw

2017-11-01

The future and development of science are in interdisciplinary areas, such as biomedical engineering. Self-assembled structures, similar to stem cell niches, inhibit rapid cellular division processes and enable the capture of stem cells from blood flow. By modifying the surface topography and stiffness properties, progenitor cells were differentiated towards the formation of endothelial cell monolayers to effectively inhibit the coagulation cascade. Wrinkled material layers in the form of thin polymeric coatings were prepared. An optimized surface topography led to proper cell differentiation and influenced the appropriate formation of endothelial cell monolayers. Blood activation was decelerated by the formed endothelium. Copyright © 2017 Elsevier B.V. All rights reserved.

Properties of nanocrystalline Si layers embedded in structure of solar cell

NASA Astrophysics Data System (ADS)

Jurečka, Stanislav; Imamura, Kentaro; Matsumoto, Taketoshi; Kobayashi, Hikaru

2017-12-01

Suppression of spectral reflectance from the surface of solar cell is necessary for achieving a high energy conversion efficiency. We developed a simple method for forming nanocrystalline layers with ultralow reflectance in a broad range of wavelengths. The method is based on metal assisted etching of the silicon surface. In this work, we prepared Si solar cell structures with embedded nanocrystalline layers. The microstructure of embedded layer depends on the etching conditions. We examined the microstructure of the etched layers by a transmission electron microscope and analysed the experimental images by statistical and Fourier methods. The obtained results provide information on the applied treatment operations and can be used to optimize the solar cell forming procedure.

Flame resistant nontoxic polymer development

NASA Technical Reports Server (NTRS)

Paciorek, K. L.; Karle, D. W.; Kratzer, R. H.

1975-01-01

A number of homopolymers, copolymers, and terpolymers were synthesized employing styrene and four derivatives of diphenyl-p-styrylphosphine. The various polymeric compositions were prepared by two processes, (1) monomer bulk polymerizations and (2) substitution of preformed polydiphenyl-p-styrylphosphine. Results indicate that the majority of the compositions exhibit superior melting and flame retardant characteristics as compared to polystyrene, but are inferior in molding and film forming capability. Terpolymerization appears to result in the materials with the best overall combination of properties. Toxicological evaluation of three representative basic compositions in the form of molded washers showed that no mortalities occurred among the test animals exposed to the products of the oxidative thermal decomposition of the three materials.

21 CFR 352.70 - Standard sunscreen.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 82 °C, with constant stirring, until the contents of each part are solubilized. Add preparation A slowly to preparation B while stirring. Continue stirring until the emulsion formed is cooled to room...

21 CFR 352.70 - Standard sunscreen.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 82 °C, with constant stirring, until the contents of each part are solubilized. Add preparation A slowly to preparation B while stirring. Continue stirring until the emulsion formed is cooled to room...

Are Teacher and Principal Candidates Prepared to Address Student Cyberbullying?

ERIC Educational Resources Information Center

Styron, Ronald A., Jr.; Bonner, Jessica L.; Styron, Jennifer L.; Bridgeforth, James; Martin, Cecelia

2016-01-01

The purpose of this study was to examine the preparation of teacher and principal candidates to address problems created in K-12 settings as a result of cyberbullying. Participants included teacher and principal preparation students. Findings indicated that respondents were familiar with the most common forms of cyberbullying and its impact on…

Properties of amylose complexes with hexadecyl amine and its hydrochloride salt prepared by steam jet cooking

USDA-ARS?s Scientific Manuscript database

Steam jet cooking of starch is an effective, commercially scalable method of preparing amylose for complexing with a variety of ligands. Previous work has shown that dispersions of amylose complexes prepared with fatty acids (such as palmitic) formed a variety of spherulites when cooled under diffe...

The Impact of Investments in Additional Preparation on Unified State Exam Results

ERIC Educational Resources Information Center

Prakhov, Ilya Arkadyevich

2015-01-01

The paper proposes a model of educational strategies for college entrants that makes it possible to assess the investment efficiency in additional preparation as evidenced by the Unified State Exam [USE] scores. It was found that college entrants still use traditional forms of preparation despite the new institutional admission conditions at…

Simple synthesis of graphene nanocomposites MgO-rGO and Fe2O3-rGO for multifunctional applications

NASA Astrophysics Data System (ADS)

Abdel-Aal, Seham K.; Ionov, Andrey; Mozhchil, R. N.; Naqvi, Alim H.

2018-05-01

Hummer's method was used to prepare graphene oxide (GO) by chemical exfoliation of graphite. Simple precipitation method was used for the preparation of hybrid nanocomposites MgO-rGO and Fe2O3-rGO. A 0.3 Molar of corresponding metal nitrate solution and GO solution are used for the preparation process. XRD, FT-IR, and XPS were used to characterize the prepared nanocomposites. The reduction of GO into reduced rGO in the formed nanocomposites was confirmed. Morphological characterization showed the formation of needle-shaped nanocrystals of MgO successfully grown on graphene nanosheet with average crystallite size 8.4 nm. Hematite nanocomposite Fe2O3-rGO forms rod-shaped crystals with average crystallite size 27.5 nm. The saturation magnetization observed for Fe2O3-rGO is less than reported value for the pure Fe2O3 nanoparticles. Thermal properties of as-prepared hybrid nanocomposites MgO-rGO and Fe2O3-rGO showed thermal stability of the prepared nanocomposite over long range of temperature.

Method of preparing high specific activity platinum-195m

DOEpatents

Mirzadeh, Saed; Du, Miting; Beets, Arnold L.; Knapp, Jr., Furn F.

2004-06-15

A method of preparing high-specific-activity .sup.195m Pt includes the steps of: exposing .sup.193 Ir to a flux of neutrons sufficient to convert a portion of the .sup.193 Ir to .sup.195m Pt to form an irradiated material; dissolving the irradiated material to form an intermediate solution comprising Ir and Pt; and separating the Pt from the Ir by cation exchange chromatography to produce .sup.195m Pt.

Preparation of energy storage materials

DOEpatents

Li, Lin Song; Jia, Quanxi

2003-01-01

A process is provided for the preparation of a metallic oxide composite including mixing an aqueous solution of a water-soluble metal compound and colloidal silica, depositing the mixture upon a substrate, heating the mixture-coated substrates at temperatures from about 150.degree. C. to about 300.degree. C. for time sufficient to form a metallic oxide film, and, removing the silica from the metallic oxide film whereby a porous metal oxide structure is formed.

Preparation Of Energy Storage Materials

DOEpatents

Li, Lin Song; Jia, Quanxi

2003-12-02

A process is provided for the preparation of a metallic oxide composite including mixing an aqueous solution of a water-soluble metal compound and colloidal silica, depositing the mixture upon a substrate, heating the mixture-coated substrates at temperatures from about 150.degree. C. to about 300.degree. C. for time sufficient to form a metallic oxide film, and, removing the silica from the metallic oxide film whereby a porous metal oxide structure is formed.

Carbons for lithium batteries prepared using sepiolite as an inorganic template

DOEpatents

Sandi, Giselle; Winans, Randall E.; Gregar, K. Carrado

2000-01-01

A method of preparing an anode material using sepiolite clay having channel-like interstices in its lattice structure. Carbonaceous material is deposited in the channel-like interstices of the sepiolite clay and then the sepiolite clay is removed leaving the carbonaceous material. The carbonaceous material is formed into an anode. The anode is combined with suitable cathode and electrolyte materials to form a battery of the lithium-ion type.

Polyimides Derived from Novel Asymmetric Dianhydrides

NASA Technical Reports Server (NTRS)

Chuang, Chun-Hua (Inventor)

2012-01-01

This invention relates to the compositions and processes for preparing thermoset and thermoplastic polyimides derived from novel asymmetrical dianhydrides: specifically 2,3,3',4' benzophenone dianhydride (a-BTDA), and 3,4'-(hexafluoroisopropylidene)diphthalic anhydride (a-6FDA). The a-BTDA anhydride is prepared by Suzuki coupling with catalysts from a mixed anhydride of 3,4-dimethylbenzoic acid or 2,3-dimethylbenzoic acid with 2,3-dimethylphenylboronic acid or 3,4-dimethylphenylboronic acid respectively, to form 2,3,3',4'-tetramethylbenzophenone which is oxidized to form 2,3,3',4'-benzophenonetetracarboxylic acid followed by cyclodehydration to obtain a-BTDA. The a-6FDA is prepared by nucleophilic triflouoromethylation of 2,3,3',4'-tetramethylbenzophenone with trifluoromethyltrimethylsilane to form 3,4'-(trifluoromethylmethanol)-bis(o-xylene) which is converted to 3,4'-(hexafluoroisopropylidene-bis(o-xylene). The 3,4'-(hexafluoroisopropylidene)-bis(o-xylene) is oxidized to the corresponding tetraacid followed by cyclodehydration to yield a-6FDA.

78 FR 35279 - Agency Information Collection Activities; Proposed Collection; Comment Request; Electronic Products

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-12

... Lasers and Products Containing Lasers'' FDA Form 3633 ``General Variance Request'' FDA Form 3634 ``Television Products Annual Report'' FDA Form 3635 ``Laser Light Show Notification'' FDA Form 3636 ``Guide for Preparing Annual Reports on Radiation Safety Testing of Laser and Laser Light Show Products'' FDA Form 3637...

Ultrastrong Graphene-Based Fibers with Increased Elongation.

PubMed

Li, Mochen; Zhang, Xiaohong; Wang, Xiang; Ru, Yue; Qiao, Jinliang

2016-10-12

A new method to prepare graphene-based fibers with ultrahigh tensile strength, conductivity, and increased elongation is reported. It includes wet-spinning the mixture of GO aqueous dispersion with phenolic resin solution in a newly developed coagulation bath, followed by annealing. The introduced phenolic carbon increased densification of graphene fibers through reducing defects and increased interfacial interaction among graphene sheets by forming new C-C bonds, thus resulting in the increasing of stiffness, toughness, and conductivity simultaneously.

Building Maintenance and Repair Data for Life-Cycle Cost Analyses: Electrical Systems.

DTIC Science & Technology

1991-05-01

Repair Data for Life-Cycle Cost Analyses: Electrical Systems by Edgar S. Neely Robert D. Neathammer James R. Stirn Robert P. Winkler This research...systems have been developed to assist planners in preparing DD Form 1391 documentation, designers in life-cycle cost component selection, and maintainers...Maintenance and Repair Data for Life-Cycle Cost Analyses: RDTE dated 1980 Electrical Systems REIMB 1984 - 1989 6. AUTH4OR(S) Edgar S. Neely, Robert D

Laboratory medicine: challenges and opportunities.

PubMed

Bossuyt, Xavier; Verweire, Kurt; Blanckaert, Norbert

2007-10-01

Technologic innovations have substantially improved the productivity of clinical laboratories, but the services provided by clinical laboratories are increasingly becoming commoditized. We reflect on how current developments may affect the future of laboratory medicine and how to deal with these changes. We argue that to be prepared for the future, clinical laboratories should enhance efficiency and reduce costs by forming alliances and networks; consolidating, integrating, or outsourcing; and more importantly, create additional value by providing knowledge services related to in vitro diagnostics.

Preparation of novel film-forming armoured latexes using silica nanoparticles as a pickering emulsion stabiliser.

PubMed

Shiraz, Hana; Peake, Simon J; Davey, Tim; Cameron, Neil R; Tabor, Rico F

2018-05-15

Film-forming polymer latex particles of diameter <300 nm can be prepared in the complete absence of surfactants, stabilised in part by silica nanoparticles through a Pickering type emulsion polymerisation. Control of the silica wettability through modulation of reaction pH or by reaction of the nanoparticles with a hydrophobic silane results in silica-covered latex particles. The oil-in-water polymerisation process used methyl methacrylate (MMA) and n-butyl acrylate (BA) as co-monomers, potassium persulphate (KPS) as an initiator and a commercially available colloidal nano-silica (Ludox®-TM40). It was found that pH control before polymerisation using methacrylic acid (MAA) facilitated the formation of armoured latexes, and mechanistic features of this process are discussed. An alternative, more robust protocol was developed whereby addition of vinyltriethoxysilane (VTES) to control wettability resulted in latexes completely armoured in colloidal nano-silica. The latexes were characterised using SEM, cryo-TEM and AFM imaging techniques. The mechanism behind the adsorption was investigated through surface pressure and contact angle measurements to understand the factors that influence this irreversible adsorption. Results indicate that nanoparticle attachment (but intriguingly not latex size) is dependent on particle wettability, providing new insight into the formation of nanoparticle-armoured latexes, along with opportunities for further development of diversely functionalized inorganic/organic polymer composite particles. Copyright © 2018 Elsevier Inc. All rights reserved.

Detergents modify proteinase K resistance of PrPSc in different transmissible spongiform encephalopathies (TSEs)

PubMed Central

Breyer, Johanna; Wemheuer, Wiebke M.; Wrede, Arne; Graham, Catherine; Benestad, Sylvie L.; Brenig, Bertram; Richt, Jürgen A.; Schulz-Schaeffer, Walter J.

2012-01-01

Prion diseases are diagnosed by the detection of their proteinase K-resistant prion protein fragment (PrPSc). Various biochemical protocols use different detergents for the tissue preparation. We found that the resistance of PrPSc against proteinase K may vary strongly with the detergent used. In our study, we investigated the influence of the most commonly used detergents on eight different TSE agents derived from different species and distinct prion disease forms. For a high throughput we used a membrane adsorbtion assay to detect small amounts of prion aggregates, as well as Western blotting. Tissue lysates were prepared using DOC, SLS, SDS or Triton X-100 in different concentrations and these were digested with various amounts of proteinase K. Detergents are able to enhance or diminish the detectability of PrPSc after proteinase K digestion. Depending on the kind of detergent, its concentration - but also on the host species that developed the TSE and the disease form or prion type - the detectability of PrPSc can be very different. The results obtained here may be helpful during the development or improvement of a PrPSc detection method and they point towards a detergent effect that can be additionally used for decontamination purposes. A plausible explanation for the detergent effects described in this article could be an interaction with the lipids associated with PrPSc that may stabilize the aggregates. PMID:22226540

Quality considerations of paediatric investigation plans for monoclonal antibodies: A regulatory perspective from the MHRA.

PubMed

Hussain, Nasir; Siapkara, Angeliki; Branch, Sarah

2015-08-15

Since the advent of the EU Paediatric Regulation in 2007, 78 of the 1688 Paediatric Investigation Plans (PIPs) have been for monoclonal antibodies (Mabs). Of these, 22 have been assessed by the MHRA. The purpose of this mini-review is to aid those researching and developing this class of drugs to better understand regulatory concerns leading to improved medicinal products for children. Three principal quality issues were identified for PIPs under Article 7 and 8: i) the level of anti-aggregation stabilisers, ii) acceptability and tolerability of administration (i.e. multiple injections, infusion time and volume), and iii) the need to develop new presentational forms (e.g. pre-filled syringe). Overall, two types of concerns were ascertained - those which are potentially avoidable (e.g. through development of new presentational forms) and others which require the evolution of new technologies in the sector (e.g. production of concentrated, stabilised preparations). Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Titanium dental copings prepared by a powder metallurgy method: a preliminary report.

PubMed

Eriksson, Mikael; Andersson, Matts; Carlström, Elis

2004-01-01

The purpose of this study was to determine if the Procera pressed-powder method can be used to fabricate titanium copings. Commercially pure titanium powder was used to prepare the copings. The powder was pressed onto an enlarged tooth preparation die of aluminum using cold isostatic pressing. The outer shape of the coping was formed using a Procera milling machine, and the copings were vacuum sintered. Titanium copings could be prepared using this method. The density of the sintered copings reached 97% to 99%+ of theoretic density, and the copings showed ductile behavior after sintering. Enlarging the tooth preparation die to compensate for the sintering shrinkage could optimize the final size of the copings. Ductile and dense titanium dental copings can be produced with powder-metal processing using cold isostatic pressing, followed by milling and sintering to final shape. The forming technique has, if properly optimized, a potential of becoming a more cost-efficient production method than spark erosion.

Development, preparation, and characterization of high-performance superconducting materials for space applications

NASA Technical Reports Server (NTRS)

Thorpe, Arthur N.; Barkatt, Aaron

1991-01-01

The preparation of high-temperature superconducting ceramics in bulk form is a major challenge in materials science. The current status of both partial melting and melt quenching techniques, with or without an intermediate powder processing stage, is described in detail, and the problems associated with each of the methods are discussed. Results of studies performed on melt-processed materials are reported and discussed. The discussion places emphasis on magnetization and on other physical properties associated with it, such as critical current density, levitation force, and flux creep. The nature of structural features which give rise to flux pinning, including both small and large defects, is discussed with reference to theoretical considerations. The rates of flux creep and the factors involved in attempting to retard the decay of the magnetization are surveyed.

Method for etching thin films of niboium and niobium-containing compounds for preparing superconductive circuits

DOEpatents

Kampwirth, R.T.; Schuller, I.K.; Falco, C.M.

1979-11-23

An improved method of preparing thin film superconducting electrical circuits of niobium or niobium compounds is provided in which a thin film of the niobium or niobium compound is applied to a nonconductive substrate and covered with a layer of photosensitive material. The sensitive material is in turn covered with a circuit pattern exposed and developed to form a mask of the circuit in photoresistive material on the surface of the film. The unmasked excess niobium film is removed by contacting the substrate with an aqueous etching solution of nitric acid, sulfuric acid, and hydrogen fluoride, which will rapidly etch the niobium compound without undercutting the photoresist. A modification of the etching solution will permit thin films to be lifted from the substrate without further etching.

Emerging Chitosan-Based Films for Food Packaging Applications.

PubMed

Wang, Hongxia; Qian, Jun; Ding, Fuyuan

2018-01-17

Recent years have witnessed great developments in biobased polymer packaging films for the serious environmental problems caused by the petroleum-based nonbiodegradable packaging materials. Chitosan is one of the most abundant biopolymers after cellulose. Chitosan-based materials have been widely applied in various fields for their biological and physical properties of biocompatibility, biodegradability, antimicrobial ability, and easy film forming ability. Different chitosan-based films have been fabricated and applied in the field of food packaging. Most of the review papers related to chitosan-based films are focusing on antibacterial food packaging films. Along with the advances in the nanotechnology and polymer science, numerous strategies, for instance direct casting, coating, dipping, layer-by-layer assembly, and extrusion, have been employed to prepare chitosan-based films with multiple functionalities. The emerging food packaging applications of chitosan-based films as antibacterial films, barrier films, and sensing films have achieved great developments. This article comprehensively reviews recent advances in the preparation and application of engineered chitosan-based films in food packaging fields.

Protective effects of vaccines against Bordetella parapertussis in a mouse intranasal challenge model.

PubMed

Komatsu, Eiji; Yamaguchi, Fuminori; Eguchi, Masahiro; Watanabe, Mineo

2010-06-17

Bordetella parapertussis causes typical whooping cough, as does Bordetella pertussis. However, current commercial vaccines are ineffective against B. parapertussis. In an effort to develop vaccines that are effective in protecting against both B. pertussis and B. parapertussis, we examined the protective effects of vaccines prepared from whole-cells and from recombinant proteins derived from B. parapertussis in a mouse intranasal challenge model. We confirmed current pertussis vaccines did not induce protective immunity against B. parapertussis in the mouse model. A whole-cell vaccine prepared from B. parapertussis induced protective immunity against B. parapertussis but not against B. pertussis, suggesting a combination of a current pertussis vaccine with a whole-cell parapertussis vaccine might prevent whooping cough caused by both species of Bordetella. We also found that filamentous hemagglutinin was a protective antigen of B. parapertussis. Our observations should lead to the development of new pertussis vaccines that can control the two prevalent forms of whooping cough.

Light-Induced C-H Arylation of (Hetero)arenes by In Situ Generated Diazo Anhydrides.

PubMed

Cantillo, David; Mateos, Carlos; Rincon, Juan A; de Frutos, Oscar; Kappe, C Oliver

2015-09-07

Diazo anhydrides (Ar-N=N-O-N=N-Ar) have been known since 1896 but have rarely been used in synthesis. This communication describes the development of a photochemical catalyst-free C-H arylation methodology for the preparation of bi(hetero)aryls by the one-pot reaction of anilines with tert-butyl nitrite and (hetero)arenes under neutral conditions. The key step in this procedure is the in situ formation and subsequent photochemical (>300 nm) homolytic cleavage of a transient diazo anhydride intermediate. The generated aryl radical then efficiently reacts with a (hetero)arene to form the desired bi(hetero)aryls producing only nitrogen, water, and tert-butanol as byproducts. The scope of the reaction for several substituted anilines and (hetero)arenes was investigated. A continuous-flow protocol increasing selectivity and safety has been developed enabling the experimentally straightforward preparation of a variety of substituted bi(hetero)aryls within 45 min of reaction time. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Molecular Design for Preparation of Hexagonal-Ordered Porous Films Based on Side-chain Type Liquid-Crystalline Star Polymer.

PubMed

Naka, Yumiko; Takayama, Hiromu; Koyama, Teruhisa; Le, Khoa V; Sasaki, Takeo

2018-05-02

Fabrication of regularly porous films by the breath-figure method has attracted much attention. The simple, low-cost technique uses the condensation of water droplets to produce these structures, but the phenomenon itself is complex, requiring control over many interacting parameters that change throughout the process. Developing a unified understanding for the molecular design of polymers to prepare ordered porous films is challenging, but required for further advancements. In this article, the effects of the chemical structure of polymers in the breath-figure technique were systematically explored using side-chain type liquid-crystalline (LC) star polymers. The formation of porous films was affected by the structure of the polymers. Although the entire film surface of poly(11-[4-(4-cyanobiphenyl)oxy]undecyl methacrylate) (P11CB) had a hexagonal ordered porous structure over a certain Mn value, regularly arranged holes did not easily form in poly(methyl methacrylate) (PMMA), even though the main chain of PMMA is similar to that of P11CB. Comparing P11CB and poly(11-[(1,1'-biphenyl)-4-yloxy]undecyl methacrylate) (P11B) (P11CB without cyano groups) showed that the local polar groups in hydrophobic polymers promoted the formation of ordered porous films. No holes formed in poly(4-cyanobiphenyl methacrylate) (P0CB) (P11CB without alkyl spacers) films due to its hydrophilicity. The introduction of alkyl chains in P0CB allowed the preparation of honeycomb-structured films by increasing the internal tension. However, alkyl chains in the side chain alone did not result in a porous structure, as in the case of poly(11-[(1,1'-biphenyl)-4-yloxy]undecyl methacrylate) (P11). Aromatic rings are also required to increase the Tg and improve film formability. In the present study, suitable molecular designs of polymers were found, specifically hydrophobic polymers with local polar groups, to form a regularly porous structure. Development of clear guidelines for the molecular design of polymers is the subject of our current research, which will enable the fabrication of porous films using various functional polymers.

Thai nursing students' adaption to problem-based learning: a qualitative study.

PubMed

Klunklin, Areewan; Subpaiboongid, Pornpun; Keitlertnapha, Pongsri; Viseskul, Nongkran; Turale, Sue

2011-11-01

Student-centred forms of learning have gained favour internationally over the last few decades including problem based learning, an approach now incorporated in medicine, nursing and other disciplines' education in many countries. However, it is still new in Thailand and being piloted to try to offset traditional forms of didactic, teacher-centred forms of teaching. In this qualitative study, 25 undergraduate nursing students in northern Thailand were interviewed about their experiences with problem-based learning in a health promotion subject. Content analysis was used to interrogate interview data, which revealed four categories: adapting, seeking assistance, self-development, and thinking process development. Initially participants had mixed emotions of confusion, negativity or boredom in the adaption process, but expressed satisfaction with creativity in learning, group work, and leadership development. They described increased abilities to problem solve and think critically, but struggled to develop questioning behaviours in learning. Socio-culturally in Thai education, students have great respect for teachers, but rarely question or challenge them or their learning. We conclude that problem-based learning has great potential in Thai nursing education, but educators and systems need to systematically prepare appropriate learning environments, their staff and students, to incorporate this within curricula. Copyright © 2011 Elsevier Ltd. All rights reserved.

[Test set for the evaluation of hearing and speech development after cochlear implantation in children].

PubMed

Lamprecht-Dinnesen, A; Sick, U; Sandrieser, P; Illg, A; Lesinski-Schiedat, A; Döring, W H; Müller-Deile, J; Kiefer, J; Matthias, K; Wüst, A; Konradi, E; Riebandt, M; Matulat, P; Von Der Haar-Heise, S; Swart, J; Elixmann, K; Neumann, K; Hildmann, A; Coninx, F; Meyer, V; Gross, M; Kruse, E; Lenarz, T

2002-10-01

Since autumn 1998 the multicenter interdisciplinary study group "Test Materials for CI Children" has been compiling a uniform examination tool for evaluation of speech and hearing development after cochlear implantation in childhood. After studying the relevant literature, suitable materials were checked for practical applicability, modified and provided with criteria for execution and break-off. For data acquisition, observation forms for preparation of a PC-version were developed. The evaluation set contains forms for master data with supplements relating to postoperative processes. The hearing tests check supra-threshold hearing with loudness scaling for children, speech comprehension in silence (Mainz and Göttingen Test for Speech Comprehension in Childhood) and phonemic differentiation (Oldenburg Rhyme Test for Children), the central auditory processes of detection, discrimination, identification and recognition (modification of the "Frankfurt Functional Hearing Test for Children") and audiovisual speech perception (Open Paragraph Tracking, Kiel Speech Track Program). The materials for speech and language development comprise phonetics-phonology, lexicon and semantics (LOGO Pronunciation Test), syntax and morphology (analysis of spontaneous speech), language comprehension (Reynell Scales), communication and pragmatics (observation forms). The MAIS and MUSS modified questionnaires are integrated. The evaluation set serves quality assurance and permits factor analysis as well as controls for regularity through the multicenter comparison of long-term developmental trends after cochlear implantation.

Collaborative Decision Model on Stockpile Material of a Traditional Market Infrastructure using Value-Based HBU

NASA Astrophysics Data System (ADS)

Utomo, C.; Rahmawati, Y.; Pararta, D. L.; Ariesta, A.

2017-11-01

Readiness of infrastructure establishment is needed in the early phase of real estate development. To meet the needs of retail property in the form of traditional markets, the Government prepares to build a new 1300 units. Traditional market development requires infrastructure development. One of it is the preparation of sand material embankment as much as ± 200,000 m3. With a distance of 30 km, sand material can be delivered to the project site by dump trucks that can only be operated by 2 trip per day. The material is managed by using stockpile method. Decision of stockpile location requires multi person and multi criteria in a collaborative environment. The highest and the best use (HBU) criteria was used to construct a value-based decision hierarchy. Decision makers from five stakeholders analyzed the best of three locations by giving their own preference of development cost and HBU function. Analytical Hierarchy Process (AHP) based on satisfying options and cooperative game was applied for agreement options and coalition formation on collaborative decision. The result indicates that not all solutions become a possible location for the stockpile material. It shows the ‘best fit’ options process for all decision makers.

Managing EEE part standardisation and procurement

NASA Astrophysics Data System (ADS)

Serieys, C.; Bensoussan, A.; Petitmangin, A.; Rigaud, M.; Barbaresco, P.; Lyan, C.

2002-12-01

This paper presents the development activities in space components selection and procurement dealing with a new data base tool implemented at Alcatel Space using TransForm softwaa re configurator developed by Techform S.A. Based on TransForm, Access Ingenierie has devv eloped a software product named OLG@DOS which facilitate the part nomenclatures analyses for new equipment design and manufacturing in term of ACCESS data base implementation. Hi-Rel EEE part type technical, production and quality information are collected and compiled usingproduction data base issued from production tools implemented for equipment definition, description and production based on Manufacturing Resource Planning (MRP II Control Open) and Parametric Design Manager (PDM Work Manager). The analysis of any new equipment nomenclature may be conducted through this means for standardisation purpose, cost containment program and management procurement activities as well as preparation of Component reviews as Part Approval Document and Declared Part List validation.

[Health-related assessment of the work training of 5-7th-form pupils].

PubMed

Sorokina, A A

1990-09-01

The present investigation is devoted to the study of the influence of labour on the functional state of the organism of medium school-aged pupils. It has been found out that engagement of schoolchildren in the workships and study rooms of service labour are not tiring, which creates reserves for the active development of the motor functions of schoolchildren. At the same time it has been found out that the types of labour which they encounter for the first time (joinery in the 5th form, electrotechnical work) lead to unfavourable changes in the functional state of schoolchildren organisms. The data obtained in the course of investigation on the organization of labour lesson (density of working and lessons structure) have been used in the development of 'Concept of labour preparation of the rising generation and studying young people in the system of continuous education'.

Orodispersible Films for Compounding Pharmacies.

PubMed

Ferreira, Anderson O; Brandão, Marcos Antônio F; Raposo, Francisco José; Polonini, Hudson C; Raposo, Nádia Rezende Barbosa

2017-01-01

Orodispersible film can be defined as a solid pharmaceutical form intended for the delivery and rapid local or systemic release of active ingredients, consisting of a water-soluble polymer film that hydrates rapidly, adhering and dissolving immediately when placed on the tongue or in the oral cavity (oral, palatal, gingival, lingual, or sublingual), without the need for water administration or mastication. Due to its outstanding importance in cases of emergency, practicality of use by patients in transit, and high adherence, orodispersible film has evolved in popularity and success among consumers. It is a promising dosage form for compounding pharmacies, as simpler technologies are being developed to make the compound process easier and faster for the pharmacist. This article aims to explore some of the basics on orodispersible film and the main possible preparations to be developed in compounding pharmacies worldwide. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Preparation of Salicylic Acid Loaded Nanostructured Lipid Carriers Using Box-Behnken Design: Optimization, Characterization and Physicochemical Stability.

PubMed

Pantub, Ketrawee; Wongtrakul, Paveena; Janwitayanuchit, Wicharn

2017-01-01

Nanostructured lipid carriers loaded salicylic acid (NLCs-SA) were developed and optimized by using the design of experiment (DOE). Box-Behnken experimental design of 3-factor, 3-level was applied for optimization of nanostructured lipid carriers prepared by emulsification method. The independent variables were total lipid concentration (X 1 ), stearic acid to Lexol ® GT-865 ratio (X 2 ) and Tween ® 80 concentration (X 3 ) while the particle size was a dependent variable (Y). Box-Behnken design could create 15 runs by setting response optimizer as minimum particle size. The optimized formulation consists of 10% of total lipid, a mixture of stearic acid and capric/caprylic triglyceride at a 4:1 ratio, and 25% of Tween ® 80 which the formulation was applied in order to prepare in both loaded and unloaded salicylic acid. After preparation for 24 hours, the particle size of loaded and unloaded salicylic acid was 189.62±1.82 nm and 369.00±3.37 nm, respectively. Response surface analysis revealed that the amount of total lipid is a main factor which could affect the particle size of lipid carriers. In addition, the stability studies showed a significant change in particle size by time. Compared to unloaded nanoparticles, the addition of salicylic acid into the particles resulted in physically stable dispersion. After 30 days, sedimentation of unloaded lipid carriers was clearly observed. Absolute values of zeta potential of both systems were in the range of 3 to 18 mV since non-ionic surfactant, Tween ® 80, providing steric barrier was used. Differential thermograms indicated a shift of endothermic peak from 55°C for α-crystal form in freshly prepared samples to 60°C for β´-crystal form in storage samples. It was found that the presence of capric/caprylic triglyceride oil could enhance encapsulation efficiency up to 80% and facilitate stability of the particles.

Assessment of Dextran Antigenicity of Intravenous Iron Preparations with Enzyme-Linked Immunosorbent Assay (ELISA)

PubMed Central

Neiser, Susann; Koskenkorva, Taija S.; Schwarz, Katrin; Wilhelm, Maria; Burckhardt, Susanna

2016-01-01

Intravenous iron preparations are typically classified as non-dextran-based or dextran/dextran-based complexes. The carbohydrate shell for each of these preparations is unique and is key in determining the various physicochemical properties, the metabolic pathway, and the immunogenicity of the iron-carbohydrate complex. As intravenous dextran can cause severe, antibody-mediated dextran-induced anaphylactic reactions (DIAR), the purpose of this study was to explore the potential of various intravenous iron preparations, non-dextran-based or dextran/dextran-based, to induce these reactions. An IgG-isotype mouse monoclonal anti-dextran antibody (5E7H3) and an enzyme-linked immunosorbent assay (ELISA) were developed to investigate the dextran antigenicity of low molecular weight iron dextran, ferumoxytol, iron isomaltoside 1000, ferric gluconate, iron sucrose and ferric carboxymaltose, as well as isomaltoside 1000, the isolated carbohydrate component of iron isomaltoside 1000. Low molecular weight iron dextran, as well as dextran-based ferumoxytol and iron isomaltoside 1000, reacted with 5E7H3, whereas ferric carboxymaltose, iron sucrose, sodium ferric gluconate, and isolated isomaltoside 1000 did not. Consistent results were obtained with reverse single radial immunodiffusion assay. The results strongly support the hypothesis that, while the carbohydrate alone (isomaltoside 1000) does not form immune complexes with anti-dextran antibodies, iron isomaltoside 1000 complex reacts with anti-dextran antibodies by forming multivalent immune complexes. Moreover, non-dextran based preparations, such as iron sucrose and ferric carboxymaltose, do not react with anti-dextran antibodies. This assay allows to assess the theoretical possibility of a substance to induce antibody-mediated DIARs. Nevertheless, as this is only one possible mechanism that may cause a hypersensitivity reaction, a broader set of assays will be required to get an understanding of the mechanisms that may lead to intravenous iron-induced hypersensitivity reactions. PMID:27455240

Chemical Characterization of an Ayurvedic Herbo-Mineral Formulation - Vasantakusumākara Rasa: A Potential Tool for Quality Assurance.

PubMed

Ota, Sarada; Singh, Arjun; Srikanth, Narayana; Sreedhar, Bojja; Ruknuddin, Galib; Dhiman, Kartar Singh

2017-01-01

Herbo-mineral formulations of Ayurveda contain specified metals or minerals as composition, which have their beneficial effects on biological systems. These metals or minerals are transformed into non-toxic forms through meticulous procedures explained in Ayurveda. Though literature is available on quality aspects of such herbo-mineral formulations; contemporary science is raising concerns at regular intervals on such formulations. Thus, it becomes mandate to develop quality profiles of all formulations that contain metals or minerals in their composition. Considering this, it is planned to evaluate analytical profile of Vasantakusumākara Rasa . To prepare Vasantakusumākara Rasa as per Standard operating Procedures (SoP) mentioned in classical text and to characterize it chemically using modern analytical techniques. The drug ( Vasantakusumākara Rasa ) in three batches was prepared in GMP certified pharmacy. Physico-chemical analysis, Assay of elements and HPTLC were carried out as per API. XRD was conducted using Rigaku Ultima-IV X-ray diffractometer. The analysis shown the presence of Mercury, Tin, Gold, Silver, Iron, Zinc and Calcium etc., and HPTLC revealed presence of organic constituents from plant material. The XRD indicated the presence of cinnabar (mercury sulphide from Rasa Sindhura ), cassiterite (tin oxide from Vaṅga Bhasma ), massicot (lead oxide from Nāga bhasma ) and Magnetite (di-iron oxide from Loha bhasma ). The physico chemical analysis reveals that VKR prepared by following classical guidelines is very effective in converting the macro elements into therapeutically effective medicines in micro form. Well prepared herbo-mineral drugs offer many advantages over plant medicines due to their longer shelf life, lesser doses, easy storing facilities, better palatability etc. The inferences and the standards laid down in this study certainly can be utilized as baseline data of standardization and QC.

Hydrogels containing redispersible spray-dried melatonin-loaded nanocapsules: a formulation for transdermal-controlled delivery

NASA Astrophysics Data System (ADS)

Hoffmeister, Cristiane RD; Durli, Taís L.; Schaffazick, Scheila R.; Raffin, Renata P.; Bender, Eduardo A.; Beck, Ruy CR; Pohlmann, Adriana R.; Guterres, Sílvia S.

2012-05-01

The aim of the present study was to develop a transdermal system for controlled delivery of melatonin combining three strategies: nanoencapsulation of melatonin, drying of melatonin-loaded nanocapsules, and incorporation of nanocapsules in a hydrophilic gel. Nanocapsules were prepared by interfacial deposition of the polymer and were spray-dried using water-soluble excipients. In vitro drug release profiles were evaluated by the dialysis bag method, and skin permeation studies were carried out using Franz cells with porcine skin as the membrane. The use of 10% ( w/ v) water-soluble excipients (lactose or maltodextrin) as spray-drying adjuvants furnished redispersible powders (redispersibility index approximately 1.0) suitable for incorporation into hydrogels. All formulations showed a better controlled in vitro release of melatonin compared with the melatonin solution. The best controlled release results were achieved with hydrogels prepared with dried nanocapsules (hydrogels > redispersed dried nanocapsules > nanocapsule suspension > melatonin solution). The skin permeation studies demonstrated a significant modulation of the transdermal melatonin permeation for hydrogels prepared with redispersible nanocapsules. In this way, the additive effect of the different approaches used in this study (nanoencapsulation, spray-drying, and preparation of semisolid dosage forms) allows not only the control of melatonin release, but also transdermal permeation.

Application of spherical silicate to prepare solid dispersion dosage forms with aqueous polymers.

PubMed

Nagane, Kentaro; Kimura, Susumu; Ukai, Koji; Takahashi, Chisato; Ogawa, Noriko; Yamamoto, Hiromitsu

2015-09-30

The objective of this study is to prepare and characterize solid dispersions of nifedipine (NP) using porous spherical silicate micro beads (MB) that were approximately 100 μm in diameter with vinylpyrrolidone/vinyl acetate copolymer (PVP/VA) and a Wurster-type fluidized bed granulator. Compared with previously reported solid dispersion using only MB, the supersaturation of NP dissolved from the proposed system of MB and PVP/VA was maintained during dissolution tests. The proposed system produced a solid dispersion product coated on MB, and morphology was maintained after the coating process to prepare solid dispersion; therefore, the powder characteristics, such as flowability of the proposed solid dispersion product, was tremendously preferable to that of the conventional spray-dried solid dispersions of NP with PVP/VA, expecting to make the consequent manufacturing processes easy for development. Another advantage in the terms of manufacturing is its simple process to prepare solid dispersion by spraying the drug and polymer that were dissolved in an organic solvent onto a MB in a Wurster-type fluidized bed granulator, thus, simplifying the optimization and scale-up with ease. Copyright © 2015 Elsevier B.V. All rights reserved.

Intranasal scopolamine preparation and method

NASA Technical Reports Server (NTRS)

Putcha, Lakshmi (Inventor); Cintron, Nitza M. (Inventor)

1991-01-01

A new method and preparation for intranasal delivery of scopolamine provides a safe and effective treatment for motion sickness and other conditions requiring anticholinergic therapy. The preparation can be in the form of aqueous nasal drops, mist spray, gel or oinment. Intranasal delivery of scopolamine has similar bioavailability and effect of intravenous delivery and is far superior to oral dosage. Scopolamine is prepared in a buffered saline solution at the desired dosage rate for effective anticholinergic response.

Development of a floating drug delivery system with superior buoyancy in gastric fluid using hot-melt extrusion coupled with pressurized CO₂.

PubMed

Almutairy, B K; Alshetaili, A S; Ashour, E A; Patil, H; Tiwari, R V; Alshehri, S M; Repka, M A

2016-03-01

The present study aimed to develop a continuous single-step manufacturing platform to prepare a porous, low-density, and floating multi-particulate system (mini-tablet, 4 mm size). This process involves injecting inert, non-toxic pressurized CO₂gas (P-CO₂) in zone 4 of a 16-mm hot-melt extruder (HME) to continuously generate pores throughout the carrier matrix. Unlike conventional methods for preparing floating drug delivery systems, additional chemical excipients and additives are not needed in this approach to create minute openings on the surface of the matrices. The buoyancy efficiency of the prepared floating system (injection of P-CO₂) in terms of lag time (0 s) significantly improved (P < 0.05), compared to the formulation prepared by adding the excipient sodium bicarbonate (lag time 120 s). The main advantages of this novel manufacturing technique include: (i) no additional chemical excipients need to be incorporated in the formulation, (ii) few manufacturing steps are required, (iii) high buoyancy efficiency is attained, and (iv) the extrudate is free of toxic solvent residues. Floating mini-tablets containing acetaminophen (APAP) as a model drug within the matrix-forming carrier (Eudragit® RL PO) have been successfully processed via this combined technique (P-CO₂/HME). Desired controlled release profile of APAP from the polymer Eudragit® RL PO is attained in the optimized formulation, which remains buoyant on the surface of gastric fluids prior to gastric emptying time (average each 4 h).

Preparing Teacher Candidates to Integrate Reading and Writing Instruction: A Conceptual Piece

ERIC Educational Resources Information Center

Nicholas, Erika L.

2017-01-01

This piece focuses on increasing writing instruction for secondary English teacher candidates in the form of integrating reading and writing. Often, teacher candidates are not sufficiently prepared in university coursework to teach writing and are left to rely on formulaic writing that merely prepares their students for the end-of-year tests.…

Performance Pay System Preferences of Students Preparing to Be Teachers

ERIC Educational Resources Information Center

Milanowski, Anthony

2007-01-01

This study explored the potential acceptability of performance pay to new teachers by investigating attitudes toward performance pay of students preparing to be teachers. Focus groups and a survey of students preparing to be teachers at a large U.S. university were conducted. Most students expressed a preference for some form of performance pay…

32 CFR 1288.6 - Forms and reports.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Forms and reports. 1288.6 Section 1288.6 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS REGISTRATION OF PRIVATELY OWNED MOTOR VEHICLES § 1288.6 Forms and reports. (a) DLA form 1454 will be prepared...

Method of forming composite fiber blends

NASA Technical Reports Server (NTRS)

McMahon, Paul E. (Inventor); Chung, Tai-Shung (Inventor); Ying, Lincoln (Inventor)

1989-01-01

The instant invention involves a process used in preparing fibrous tows which may be formed into polymeric plastic composites. The process involves the steps of (a) forming a tow of strong filamentary materials; (b) forming a thermoplastic polymeric fiber; (c) intermixing the two tows; and (d) withdrawing the intermixed tow for further use.

32 CFR 1288.6 - Forms and reports.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Forms and reports. 1288.6 Section 1288.6 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS REGISTRATION OF PRIVATELY OWNED MOTOR VEHICLES § 1288.6 Forms and reports. (a) DLA form 1454 will be prepared...

32 CFR 1288.6 - Forms and reports.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Forms and reports. 1288.6 Section 1288.6 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS REGISTRATION OF PRIVATELY OWNED MOTOR VEHICLES § 1288.6 Forms and reports. (a) DLA form 1454 will be prepared...

32 CFR 1288.6 - Forms and reports.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Forms and reports. 1288.6 Section 1288.6 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS REGISTRATION OF PRIVATELY OWNED MOTOR VEHICLES § 1288.6 Forms and reports. (a) DLA form 1454 will be prepared...

32 CFR 1288.6 - Forms and reports.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Forms and reports. 1288.6 Section 1288.6 National Defense Other Regulations Relating to National Defense DEFENSE LOGISTICS AGENCY MISCELLANEOUS REGISTRATION OF PRIVATELY OWNED MOTOR VEHICLES § 1288.6 Forms and reports. (a) DLA form 1454 will be prepared...

Porous metal hydride composite and preparation and uses thereof

DOEpatents

Steyert, W.A.; Olsen, C.E.

1980-03-12

A composite formed from large pieces of aggregate formed from (1) metal hydride (or hydride-former) powder and (2) either metal powder or plastic powder or both is prepared. The composite has large macroscopic interconnected pores (much larger than the sizes of the powders which are used) and will have a very fast heat transfer rate and low windage loss. It will be useful, for example, in heat engines, hydrogen storage devices, and refrigerator components which depend for their utility upon both a fast rate of hydriding and dehydriding. Additionally, a method of preparing the composite and a method of increasing the rates of hydriding and dehydriding of metal hydrides are also given.

Porous metal hydride composite and preparation and uses thereof

DOEpatents

Steyert, William A.; Olsen, Clayton E.

1982-01-01

A composite formed from large pieces of aggregate formed from (1) metal hydride (or hydride-former) powder and (2) either metal powder or plastic powder or both is prepared. The composite has large macroscopic interconnected pores (much larger than the sizes of the powders which are used) and will have a very fast heat transfer rate and low windage loss. It will be useful, for example, in heat engines, hydrogen storage devices, and refrigerator components which depend for their utility upon both a fast rate of hydriding and dehydriding. Additionally, a method of preparing the composite and a method of increasing the rates of hydriding and dehydriding of metal hydrides are also given.

A Novel Method of Preparation of Inorganic Glasses by Microwave Irradiation

NASA Astrophysics Data System (ADS)

Vaidhyanathan, B.; Ganguli, Munia; Rao, K. J.

1994-12-01

Microwave heating is shown to provide an extremely facile and automatically temperature-controlled route to the synthesis of glasses. Glass-forming compositions of several traditional and novel glasses were melted in a kitchen microwave oven, typically within 5 min and quenched into glasses. This is only a fraction of the time required in normal glass preparation methods. The rapidity of melting minimizes undesirable features such as loss of components of the glass, variation of oxidation states of metal ions, and oxygen loss leading to reduced products in the glass such as metal particles. This novel procedure of preparation is applicable when at least one of the components of the glass-forming mixture absorbs microwaves.

Development of sustained release capsules containing "coated matrix granules of metoprolol tartrate".

PubMed

Siddique, Sabahuddin; Khanam, Jasmina; Bigoniya, Papiya

2010-09-01

The objective of this investigation was to prepare sustained release capsule containing coated matrix granules of metoprolol tartrate and to study its in vitro release and in vivo absorption. The design of dosage form was performed by choosing hydrophilic hydroxypropyl methyl cellulose (HPMC K100M) and hydrophobic ethyl cellulose (EC) polymers as matrix builders and Eudragit® RL/RS as coating polymers. Granules were prepared by composing drug with HPMC K100M, EC, dicalcium phosphate by wet granulation method with subsequent coating. Optimized formulation of metoprolol tartrate was formed by using 30% HPMC K100M, 20% EC, and ratio of Eudragit® RS/RL as 97.5:2.5 at 25% coating level. Capsules were filled with free flowing optimized granules of uniform drug content. This extended the release period upto 12 h in vitro study. Similarity factor and mean dissolution time were also reported to compare various dissolution profiles. The network formed by HPMC and EC had been coupled satisfactorily with the controlled resistance offered by Eudragit® RS. The release mechanism of capsules followed Korsemeyer-Peppas model that indicated significant contribution of erosion effect of hydrophilic polymer. Biopharmaceutical study of this optimized dosage form in rabbit model showed 10 h prolonged drug release in vivo. A close correlation (R(2) = 0.9434) was established between the in vitro release and the in vivo absorption of drug. The results suggested that wet granulation with subsequent coating by fluidized bed technique, is a suitable method to formulate sustained release capsules of metoprolol tartrate and it can perform therapeutically better than conventional immediate release dosage form.