Formative Process Evaluation for Implementing a Social Marketing Intervention to Increase Walking Among African Americans in the Positive Action for Today’s Health Trial

PubMed Central

Wilson, Dawn K.; Griffin, Sarah; St. George, Sara M.; Alia, Kassandra A.; Trumpeter, Nevelyn N.; Wandersman, Abraham K.; Forthofer, Melinda; Robinson, Shamika; Gadson, Barney

2012-01-01

Objectives. Evaluating programs targeting physical activity may help to reduce disparate rates of obesity among African Americans. We report formative process evaluation methods and implementation dose, fidelity, and reach in the Positive Action for Today’s Health trial. Methods: We applied evaluation methods based on an ecological framework in 2 community-based police-patrolled walking programs targeting access and safety in underserved African American communities. One program also targeted social connectedness and motivation to walk using a social marketing approach. Process data were systematically collected from baseline to 12 months. Results: Adequate implementation dose was achieved, with fidelity achieved but less stable in both programs. Monthly walkers increased to 424 in the walking-plus-social marketing program, indicating expanding program reach, in contrast to no increase in the walking-only program. Increased reach was correlated with peer-led Pride Strides (r = .92; P < .001), a key social marketing component, and program social interaction was the primary reason for which walkers reported participating. Conclusions: Formative process evaluation demonstrated that the walking programs were effectively implemented and that social marketing increased walking and perceived social connectedness in African American communities. PMID:23078486

Program Evaluation: Roles and Responsibilities of Boards of Education Relative to Thorough and Efficient Legislation.

ERIC Educational Resources Information Center

Research for Better Schools, Inc., Philadelphia, PA.

The process for providing a "thorough and efficient" (T & E) education according to New Jersey statutes and regulations involves six basic steps. This document suggests procedures for handling the fifth step, educational program evaluation. Processes discussed include committee formation, evaluation planning, action plan…

Understanding Collaboration: A Formative Process Evaluation of a State-Funded School-University Partnership

ERIC Educational Resources Information Center

Corbin, J. Hope; Chu, Marilyn; Carney, Joanne; Donnelly, Susan; Clancy, Andrea

2017-01-01

School-university partnerships are widely promoted yet little is known about what contributes to their effectiveness. This paper presents a participatory formative evaluation of a state-funded school-university partnership. The study employed an empirically derived systems model--the Bergen Model of Collaborative Functioning (BMCF)--as the…

The Design, Implementation, and Formative Evaluation of a Classroom Aide Professional Development Training Program

ERIC Educational Resources Information Center

Dulfer, Katherine J.

2013-01-01

This dissertation focused on the process of designing, implementing, and formatively evaluating an eight week Classroom Aide Professional Development Training Program (CAPD-TP) on behavior management and academic instruction within the context of a New Jersey state approved private special education school for students with behavioral and/or…

Analysis of the Efficiency of Surfactant-Mediated Stabilization Reactions of EGaIn Nanodroplets.

PubMed

Finkenauer, Lauren R; Lu, Qingyun; Hakem, Ilhem F; Majidi, Carmel; Bockstaller, Michael R

2017-09-26

A methodology based on light scattering and spectrophotometry was developed to evaluate the effect of organic surfactants on the size and yield of eutectic gallium/indium (EGaIn) nanodroplets formed in organic solvents by ultrasonication. The process was subsequently applied to systematically evaluate the role of headgroup chemistry as well as polar/apolar interactions of aliphatic surfactant systems on the efficiency of nanodroplet formation. Ethanol was found to be the most effective solvent medium in promoting the formation and stabilization of EGaIn nanodroplets. For the case of thiol-based surfactants in ethanol, the yield of nanodroplet formation increased with the number of carbon atoms in the aliphatic part. In the case of the most effective surfactant system-octadecanethiol-the nanodroplet yield increased by about 370% as compared to pristine ethanol. The rather low overall efficiency of the reaction process along with the incompatibility of surfactant-stabilized EGaIn nanodroplets in nonpolar organic solvents suggests that the stabilization mechanism differs from the established self-assembled monolayer formation process that has been widely observed in nanoparticle formation.

Interprofessional Health Team Communication About Hospital Discharge: An Implementation Science Evaluation Study.

PubMed

Bahr, Sarah J; Siclovan, Danielle M; Opper, Kristi; Beiler, Joseph; Bobay, Kathleen L; Weiss, Marianne E

The Consolidated Framework for Implementation Research guided formative evaluation of the implementation of a redesigned interprofessional team rounding process. The purpose of the redesigned process was to improve health team communication about hospital discharge. Themes emerging from interviews of patients, nurses, and providers revealed the inherent value and positive characteristics of the new process, but also workflow, team hierarchy, and process challenges to successful implementation. The evaluation identified actionable recommendations for modifying the implementation process.

Self-Rated Health Appraisal as Cultural and Identity Process: African American Elders' Health and Evaluative Rationales

ERIC Educational Resources Information Center

McMullen, Carmit K.; Luborsky, Mark R.

2006-01-01

Purpose: We explored self-rated health by using a meaning-centered theoretical foundation. Self-appraisals, such as self-rated health, reflect a cultural process of identity formation, whereby identities are multiple, simultaneously individual and collective, and produced by specific historical formations. Anthropological research in Philadelphia…

AMPX-77: A modular code system for generating coupled multigroup neutron-gamma cross-section libraries from ENDF/B-IV and/or ENDF/B-V

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greene, N.M.; Ford, W.E. III; Petrie, L.M.

AMPX-77 is a modular system of computer programs that pertain to nuclear analyses, with a primary emphasis on tasks associated with the production and use of multigroup cross sections. AH basic cross-section data are to be input in the formats used by the Evaluated Nuclear Data Files (ENDF/B), and output can be obtained in a variety of formats, including its own internal and very general formats, along with a variety of other useful formats used by major transport, diffusion theory, and Monte Carlo codes. Processing is provided for both neutron and gamma-my data. The present release contains codes all writtenmore » in the FORTRAN-77 dialect of FORTRAN and wig process ENDF/B-V and earlier evaluations, though major modules are being upgraded in order to process ENDF/B-VI and will be released when a complete collection of usable routines is available.« less

Determining if Active Learning through a Formative Assessment Process Translates to Better Performance in Summative Assessment

ERIC Educational Resources Information Center

Grosas, Aidan Bradley; Raju, Shiwani Rani; Schuett, Burkhardt Siegfried; Chuck, Jo-Anne; Millar, Thomas James

2016-01-01

Formative assessment used in a level 2 unit, Immunology, gave outcomes that were both surprising and applicable across disciplines. Four formative tests were given and reviewed during class time. The students' attitudes to formative assessment were evaluated using questionnaires and its effectiveness in closing the gap was measured by the…

77 FR 35665 - Notice of Proposed Information Collection Requests; Office of Planning, Evaluation and Policy...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-14

... evaluations may include both formative implementation and process evaluations that evaluate a program as it is unfolding, and summative descriptive evaluations that examine changes in final outcomes in a non-causal...

Analysis and evalaution in the production process and equipment area of the low-cost solar array project. [including modifying gaseous diffusion and using ion implantation

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1979-01-01

The manufacturing methods for photovoltaic solar energy utilization are assessed. Economic and technical data on the current front junction formation processes of gaseous diffusion and ion implantation are presented. Future proposals, including modifying gaseous diffusion and using ion implantation, to decrease the cost of junction formation are studied. Technology developments in current processes and an economic evaluation of the processes are included.

Evaluating a Technology Supported Interactive Response System during the Laboratory Section of a Histology Course

ERIC Educational Resources Information Center

Rinaldi, Vera D.; Lorr, Nancy A.; Williams, Kimberly

2017-01-01

Monitoring of student learning through systematic formative assessment is important for adjusting pedagogical strategies. However, traditional formative assessments, such as quizzes and written assignments, may not be sufficiently timely for making adjustments to a learning process. Technology supported formative assessment tools assess student…

The Development of a Food Safety Brochure for Families: The Use of Formative Evaluation and Plain Language Strategies

ERIC Educational Resources Information Center

Perry, Christina; Albrecht, Julie; Litchfield, Ruth; Meysenburg, Rebecca L.; Er, Ida NgYin; Lum, Adeline; Beattie, Sam; Larvick, Carol; Schwarz, Carol; Temple, Jan; Meimann, Elizabeth

2012-01-01

Printed materials have been used extensively as an educational tool to increase food safety awareness. Few educational materials have been designed to target families with young children for food safety education. This article reports the use of the formative evaluation process to develop a brochure designed to enhance awareness about food safety…

Presenting health risk information in different formats: the effect on participants' cognitive and emotional evaluation and decisions.

PubMed

Timmermans, Daniëlle R M; Ockhuysen-Vermey, Caroline F; Henneman, Lidewij

2008-12-01

Effective communication of health risks plays an important role in enabling patients to make adequate decisions. There is little--though contradictory--evidence to indicate which format is most effective for communicating risks, and which risk format is preferred by counselees. In an experiment, subjects were presented health scenarios and risk information in different formats (percentages, frequencies, and population figures) and asked to evaluate the risks and make a decision based on these. Different risk formats had different effects on respondents' evaluation of the health risks presented. Contrary to our expectation, population figures were not evaluated as being the easiest format for all decision problems. Population figures were shown to have the biggest affective impact, and risks presented as population figures were also evaluated as significantly greater than the risks presented in other formats. The format of the presented risks influenced their decision in only one out of four decision-making situations, although in a second situation there was a similar trend. This study suggests that the risk format plays a role in the decision-making process, although it remains unclear which format is the most effective in terms of understanding. More experimental studies based on a theoretical analysis of the factors that promote effective risk communication are needed in the general population as well as in clinical settings with patients actually experiencing the risks and making the decisions.

Evaluating the influence of process parameters on soluble microbial products formation using response surface methodology coupled with grey relational analysis.

PubMed

Xu, Juan; Sheng, Guo-Ping; Luo, Hong-Wei; Fang, Fang; Li, Wen-Wei; Zeng, Raymond J; Tong, Zhong-Hua; Yu, Han-Qing

2011-01-01

Soluble microbial products (SMPs) present a major part of residual chemical oxygen demand (COD) in the effluents from biological wastewater treatment systems, and the SMP formation is greatly influenced by a variety of process parameters. In this study, response surface methodology (RSM) coupled with grey relational analysis (GRA) method was used to evaluate the effects of substrate concentration, temperature, NH(4)(+)-N concentration and aeration rate on the SMP production in batch activated sludge reactors. Carbohydrates were found to be the major component of SMP, and the influential priorities of these factors were: temperature>substrate concentration > aeration rate > NH(4)(+)-N concentration. On the basis of the RSM results, the interactive effects of these factors on the SMP formation were evaluated, and the optimal operating conditions for a minimum SMP production in such a batch activated sludge system also were identified. These results provide useful information about how to control the SMP formation of activated sludge and ensure the bioreactor high-quality effluent. Copyright © 2010 Elsevier Ltd. All rights reserved.

Developing and evaluating innovative items for the NCLEX: Part 2, item characteristics and cognitive processing.

PubMed

Wendt, Anne; Harmes, J Christine

2009-01-01

This article is a continuation of the research on the development and evaluation of innovative item formats for the NCLEX examinations that was published in the March/April 2009 edition of Nurse Educator. The authors discuss the innovative item templates and evaluate the statistical characteristics and level of cognitive processing required to answer the examination items.

Evaluation of IT security – genesis and its state-of-art

NASA Astrophysics Data System (ADS)

Livshitz, I. I.; Neklyudov, A. V.; Lontsikh, P. A.

2018-05-01

It is topical to evolve processes of an evaluation of the IT security nowadays. Formation and application of common evaluation approaches to the IT component, which are processed by the governmental and civil organizations, are still not solving problem. Successful processing of the independent evaluation for conformity with a security standard is supposed to be the main criteria of a suitability of any IT component to be used in a trusted computer system. The solution of the mentioned-above problem is suggested through the localization of all research, development and producing processes in a national trusted area (digital sovereignty).

A head-up display format for transport aircraft approach and landing

NASA Technical Reports Server (NTRS)

Bray, R. S.; Scott, B. C.

1981-01-01

An electronic flight-guidance display format was designed for use in evaluations of the collimated head-up display concept applied to transport aircraft landing. In the design process of iterative evaluation and modification, some general principles, or guidelines, applicable to electronic flight displays were suggested. The usefulness of an indication of instantaneous inertial flightpath was clearly demonstrated. Evaluator pilot acceptance of the unfamiliar display concepts was very positive when careful attention was given to indoctrination and training.

Physician performance feedback in a Canadian academic center.

PubMed

Garvin, Dennis; Worthington, James; McGuire, Shaun; Burgetz, Stephanie; Forster, Alan J; Patey, Andrea; Gerin-Lajoie, Caroline; Turnbull, Jeffrey; Roth, Virginia

2017-10-02

Purpose This paper aims at the implementation and early evaluation of a comprehensive, formative annual physician performance feedback process in a large academic health-care organization. Design/methodology/approach A mixed methods approach was used to introduce a formative feedback process to provide physicians with comprehensive feedback on performance and to support professional development. This initiative responded to organization-wide engagement surveys through which physicians identified effective performance feedback as a priority. In 2013, physicians primarily affiliated with the organization participated in a performance feedback process, and physician satisfaction and participant perceptions were explored through participant survey responses and physician leader focus groups. Training was required for physician leaders prior to conducting performance feedback discussions. Findings This process was completed by 98 per cent of eligible physicians, and 30 per cent completed an evaluation survey. While physicians endorsed the concept of a formative feedback process, process improvement opportunities were identified. Qualitative analysis revealed the following process improvement themes: simplify the tool, ensure leaders follow process, eliminate redundancies in data collection (through academic or licensing requirements) and provide objective quality metrics. Following physician leader training on performance feedback, 98 per cent of leaders who completed an evaluation questionnaire agreed or strongly agreed that the performance feedback process was useful and that training objectives were met. Originality/value This paper introduces a physician performance feedback model, leadership training approach and first-year implementation outcomes. The results of this study will be useful to health administrators and physician leaders interested in implementing physician performance feedback or improving physician engagement.

Single well surfactant test to evaluate surfactant floods using multi tracer method

DOEpatents

Sheely, Clyde Q.

1979-01-01

Data useful for evaluating the effectiveness of or designing an enhanced recovery process said process involving mobilizing and moving hydrocarbons through a hydrocarbon bearing subterranean formation from an injection well to a production well by injecting a mobilizing fluid into the injection well, comprising (a) determining hydrocarbon saturation in a volume in the formation near a well bore penetrating formation, (b) injecting sufficient mobilizing fluid to mobilize and move hydrocarbons from a volume in the formation near the well bore, and (c) determining the hydrocarbon saturation in a volume including at least a part of the volume of (b) by an improved single well surfactant method comprising injecting 2 or more slugs of water containing the primary tracer separated by water slugs containing no primary tracer. Alternatively, the plurality of ester tracers can be injected in a single slug said tracers penetrating varying distances into the formation wherein the esters have different partition coefficients and essentially equal reaction times. The single well tracer method employed is disclosed in U.S. Pat. No. 3,623,842. This method designated the single well surfactant test (SWST) is useful for evaluating the effect of surfactant floods, polymer floods, carbon dioxide floods, micellar floods, caustic floods and the like in subterranean formations in much less time and at much reduced cost compared to conventional multiwell pilot tests.

Web-Based versus Paper-Based Data Collection for the Evaluation of Teaching Activity: Empirical Evidence from a Case Study

ERIC Educational Resources Information Center

Lalla, Michele; Ferrari, Davide

2011-01-01

The collection of teaching evaluation questionnaires in the traditional paper-and-pencil format is a costly and time-consuming process and yet it is a common assessment practice in many university systems. Web-based data collection would reduce costs and significantly increase the efficiency of the overall evaluation process in numerous ways.…

The design of a real-time formative evaluation of the implementation process of lifestyle interventions at two worksites using a 7-step strategy (BRAVO@Work).

PubMed

Wierenga, Debbie; Engbers, Luuk H; van Empelen, Pepijn; Hildebrandt, Vincent H; van Mechelen, Willem

2012-08-07

Worksite health promotion programs (WHPPs) offer an attractive opportunity to improve the lifestyle of employees. Nevertheless, broad scale and successful implementation of WHPPs in daily practice often fails. In the present study, called BRAVO@Work, a 7-step implementation strategy was used to develop, implement and embed a WHPP in two different worksites with a focus on multiple lifestyle interventions.This article describes the design and framework for the formative evaluation of this 7-step strategy under real-time conditions by an embedded scientist with the purpose to gain insight into whether this this 7-step strategy is a useful and effective implementation strategy. Furthermore, we aim to gain insight into factors that either facilitate or hamper the implementation process, the quality of the implemented lifestyle interventions and the degree of adoption, implementation and continuation of these interventions. This study is a formative evaluation within two different worksites with an embedded scientist on site to continuously monitor the implementation process. Each worksite (i.e. a University of Applied Sciences and an Academic Hospital) will assign a participating faculty or a department, to implement a WHPP focusing on lifestyle interventions using the 7-step strategy. The primary focus will be to describe the natural course of development, implementation and maintenance of a WHPP by studying [a] the use and adherence to the 7-step strategy, [b] barriers and facilitators that influence the natural course of adoption, implementation and maintenance, and [c] the implementation process of the lifestyle interventions. All data will be collected using qualitative (i.e. real-time monitoring and semi-structured interviews) and quantitative methods (i.e. process evaluation questionnaires) applying data triangulation. Except for the real-time monitoring, the data collection will take place at baseline and after 6, 12 and 18 months. This is one of the few studies to extensively and continuously monitor the natural course of the implementation process of a WHPP by a formative evaluation using a mix of quantitative and qualitative methods on different organizational levels (i.e. management, project group, employees) with an embedded scientist on site. NTR2861.

Processing biological literature with customizable Web services supporting interoperable formats.

PubMed

Rak, Rafal; Batista-Navarro, Riza Theresa; Carter, Jacob; Rowley, Andrew; Ananiadou, Sophia

2014-01-01

Web services have become a popular means of interconnecting solutions for processing a body of scientific literature. This has fuelled research on high-level data exchange formats suitable for a given domain and ensuring the interoperability of Web services. In this article, we focus on the biological domain and consider four interoperability formats, BioC, BioNLP, XMI and RDF, that represent domain-specific and generic representations and include well-established as well as emerging specifications. We use the formats in the context of customizable Web services created in our Web-based, text-mining workbench Argo that features an ever-growing library of elementary analytics and capabilities to build and deploy Web services straight from a convenient graphical user interface. We demonstrate a 2-fold customization of Web services: by building task-specific processing pipelines from a repository of available analytics, and by configuring services to accept and produce a combination of input and output data interchange formats. We provide qualitative evaluation of the formats as well as quantitative evaluation of automatic analytics. The latter was carried out as part of our participation in the fourth edition of the BioCreative challenge. Our analytics built into Web services for recognizing biochemical concepts in BioC collections achieved the highest combined scores out of 10 participating teams. Database URL: http://argo.nactem.ac.uk. © The Author(s) 2014. Published by Oxford University Press.

Processing biological literature with customizable Web services supporting interoperable formats

PubMed Central

Rak, Rafal; Batista-Navarro, Riza Theresa; Carter, Jacob; Rowley, Andrew; Ananiadou, Sophia

2014-01-01

Web services have become a popular means of interconnecting solutions for processing a body of scientific literature. This has fuelled research on high-level data exchange formats suitable for a given domain and ensuring the interoperability of Web services. In this article, we focus on the biological domain and consider four interoperability formats, BioC, BioNLP, XMI and RDF, that represent domain-specific and generic representations and include well-established as well as emerging specifications. We use the formats in the context of customizable Web services created in our Web-based, text-mining workbench Argo that features an ever-growing library of elementary analytics and capabilities to build and deploy Web services straight from a convenient graphical user interface. We demonstrate a 2-fold customization of Web services: by building task-specific processing pipelines from a repository of available analytics, and by configuring services to accept and produce a combination of input and output data interchange formats. We provide qualitative evaluation of the formats as well as quantitative evaluation of automatic analytics. The latter was carried out as part of our participation in the fourth edition of the BioCreative challenge. Our analytics built into Web services for recognizing biochemical concepts in BioC collections achieved the highest combined scores out of 10 participating teams. Database URL: http://argo.nactem.ac.uk. PMID:25006225

["Active in rehab": development and formative evaluation of a patient education program to increase health literacy of patients with chronic illness].

PubMed

Ullrich, A; Schöpf, A C; Nagl, M; Farin, E

2015-04-01

The aim of the article is to describe the development, the process of manualisation and results from the formative evaluation of a patient-oriented patient education program to increase health literacy of patients with chronic illness ("Active in rehab"). Themes of the patient education program were extracted from 17 focus groups. An expert meeting was conducted to validate the content of the patient education program. The formative evaluation was based on a questionnaire (N(max) = 295 patients and N(max) = 39 trainers). The patient education program includes 4 modules with 3 themes (bio-psycho-social model, rehabilitation goals, communication competencies). The evaluation of the modules was good to very good. An analysis of free texts and a follow-up survey among trainers helped us to infer important improvements to the patient education program. RESULTS from the formative evaluation show that the patient education program meets patients and trainers needs and is accepted. © Georg Thieme Verlag KG Stuttgart · New York.

ASTEP user's guide and software documentation

NASA Technical Reports Server (NTRS)

Gliniewicz, A. S.; Lachowski, H. M.; Pace, W. H., Jr.; Salvato, P., Jr.

1974-01-01

The Algorithm Simulation Test and Evaluation Program (ASTEP) is a modular computer program developed for the purpose of testing and evaluating methods of processing remotely sensed multispectral scanner earth resources data. ASTEP is written in FORTRAND V on the UNIVAC 1110 under the EXEC 8 operating system and may be operated in either a batch or interactive mode. The program currently contains over one hundred subroutines consisting of data classification and display algorithms, statistical analysis algorithms, utility support routines, and feature selection capability. The current program can accept data in LARSC1, LARSC2, ERTS, and Universal formats, and can output processed image or data tapes in Universal format.

Verification and Validation of Digitally Upgraded Control Rooms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boring, Ronald; Lau, Nathan

2015-09-01

As nuclear power plants undertake main control room modernization, a challenge is the lack of a clearly defined human factors process to follow. Verification and validation (V&V) as applied in the nuclear power community has tended to involve efforts such as integrated system validation, which comes at the tail end of the design stage. To fill in guidance gaps and create a step-by-step process for control room modernization, we have developed the Guideline for Operational Nuclear Usability and Knowledge Elicitation (GONUKE). This approach builds on best practices in the software industry, which prescribe an iterative user-centered approach featuring multiple cyclesmore » of design and evaluation. Nuclear regulatory guidance for control room design emphasizes summative evaluation—which occurs after the design is complete. In the GONUKE approach, evaluation is also performed at the formative stage of design—early in the design cycle using mockups and prototypes for evaluation. The evaluation may involve expert review (e.g., software heuristic evaluation at the formative stage and design verification against human factors standards like NUREG-0700 at the summative stage). The evaluation may also involve user testing (e.g., usability testing at the formative stage and integrated system validation at the summative stage). An additional, often overlooked component of evaluation is knowledge elicitation, which captures operator insights into the system. In this report we outline these evaluation types across design phases that support the overall modernization process. The objective is to provide industry-suitable guidance for steps to be taken in support of the design and evaluation of a new human-machine interface (HMI) in the control room. We suggest the value of early-stage V&V and highlight how this early-stage V&V can help improve the design process for control room modernization. We argue that there is a need to overcome two shortcomings of V&V in current practice—the propensity for late-stage V&V and the use of increasingly complex psychological assessment measures for V&V.« less

The Performance Appraisal: A Crucial Business Process and Product.

ERIC Educational Resources Information Center

Ewald, Helen Rothschild; McCallum, Virginia

1989-01-01

Discusses the process of work performance self-assessment, noting the importance of understanding performance appraisal as a rhetorical situation. Describes the process of setting goals, establishing criteria, assessing performance, and adapting to an organizational format. Provides examples of performance evaluation charts. (MM)

Evaluation of disinfection by-product formation during chlor(am)ination from algal organic matter after UV irradiation.

PubMed

Chen, Shi; Deng, Jing; Li, Lei; Gao, Naiyun

2018-02-01

This study evaluated the effect of low-pressure ultraviolet (UV) irradiation on the formation of disinfection by-products (DBPs) from algal organic matter of Microcystis aeruginosa during subsequent chlorination and chloramination. The algal organic matter includes extracellular organic matter (EOM) and intracellular organic matter (IOM). The fluorescence excitation-emission matrix spectra indicated that the humic/fulvic acid-like organics of EOM and the protein-like organics of IOM may be preferentially degraded by UV treatment. UV irradiation with low specific UV absorbance values was effective in reducing the formation of trihalomethanes and dichloroacetic acid from EOM and IOM during the subsequent chlorination. During the UV-chloramine process, higher UV dose (1000 mJ/cm 2 ) led to the decrease of the formation of dichloroacetic acid, trichloroacetic acid, and haloketones from IOM by an average of 24%. Furthermore, UV irradiation can slightly increase the bromine substitution factors (BSFs) of haloacetic acids from EOM during chlorination, including dihaloacetic acids and trihaloacetic acids in the presence of bromide (50 μg/L). However, UV irradiation did not shift the formation of DBPs from IOM to more brominated species, since the BSFs of trihalomethanes, dihaloacetic acids, trihaloacetic acids, and dihaloacetonitriles almost kept unchanged during UV-chlorine process. As for UV-chloramine process, UV irradiation decreased the BSFs of trihalomethanes, while increased the BSFs of dihaloacetic acid for both EOM and IOM. Overall, the UV pretreatment process is a potential technology in treating algae-rich water.

Analysis and evaluation in the production process and equipment area of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1979-01-01

The energy consumed in manufacturing silicon solar cell modules was calculated for the current process, as well as for 1982 and 1986 projected processes. In addition, energy payback times for the above three sequences are shown. The module manufacturing energy was partitioned two ways. In one way, the silicon reduction, silicon purification, sheet formation, cell fabrication, and encapsulation energies were found. In addition, the facility, equipment, processing material and direct material lost-in-process energies were appropriated in junction formation processes and full module manufacturing sequences. A brief methodology accounting for the energy of silicon wafers lost-in-processing during cell manufacturing is described.

Self-rated health appraisal as cultural and identity process: African American elders' health and evaluative rationales.

PubMed

McMullen, Carmit K; Luborsky, Mark R

2006-08-01

We explored self-rated health by using a meaning-centered theoretical foundation. Self-appraisals, such as self-rated health, reflect a cultural process of identity formation, whereby identities are multiple, simultaneously individual and collective, and produced by specific historical formations. Anthropological research in Philadelphia determined (a) how African American elders appraise their health, and (b) how health evaluations reflect cultural and historical experiences within a community. We interviewed and observed 35 adults aged 65 to 80, stratified by gender and self-rated health. We validated theme analysis of focused interview questions against the larger data set of field notes and transcripts. Health appraisal reflected a complex process of adaptation and identity. Criteria for health included: independent functioning, physical condition, control and responsibility for health, and overall feeling. Evaluative rationales that shaped health appraisals were comparisons, restricted possibilities for self-evaluation, and ways of handling adversity. Evaluative rationales mitigated undesirable health identities (including low self-reported health) and provided mechanisms for claiming desired health identities despite adversity. Describing the criteria and evaluative rationales underlying self-appraisals of health extends current understandings of self-rated health and illustrates the sociohistorical context of individual assessments of well-being.

Magnitude processing of symbolic and non-symbolic proportions: an fMRI study.

PubMed

Mock, Julia; Huber, Stefan; Bloechle, Johannes; Dietrich, Julia F; Bahnmueller, Julia; Rennig, Johannes; Klein, Elise; Moeller, Korbinian

2018-05-10

Recent research indicates that processing proportion magnitude is associated with activation in the intraparietal sulcus. Thus, brain areas associated with the processing of numbers (i.e., absolute magnitude) were activated during processing symbolic fractions as well as non-symbolic proportions. Here, we investigated systematically the cognitive processing of symbolic (e.g., fractions and decimals) and non-symbolic proportions (e.g., dot patterns and pie charts) in a two-stage procedure. First, we investigated relative magnitude-related activations of proportion processing. Second, we evaluated whether symbolic and non-symbolic proportions share common neural substrates. We conducted an fMRI study using magnitude comparison tasks with symbolic and non-symbolic proportions, respectively. As an indicator for magnitude-related processing of proportions, the distance effect was evaluated. A conjunction analysis indicated joint activation of specific occipito-parietal areas including right intraparietal sulcus (IPS) during proportion magnitude processing. More specifically, results indicate that the IPS, which is commonly associated with absolute magnitude processing, is involved in processing relative magnitude information as well, irrespective of symbolic or non-symbolic presentation format. However, we also found distinct activation patterns for the magnitude processing of the different presentation formats. Our findings suggest that processing for the separate presentation formats is not only associated with magnitude manipulations in the IPS, but also increasing demands on executive functions and strategy use associated with frontal brain regions as well as visual attention and encoding in occipital regions. Thus, the magnitude processing of proportions may not exclusively reflect processing of number magnitude information but also rather domain-general processes.

Teaching Workflow Analysis and Lean Thinking via Simulation: A Formative Evaluation

PubMed Central

Campbell, Robert James; Gantt, Laura; Congdon, Tamara

2009-01-01

This article presents the rationale for the design and development of a video simulation used to teach lean thinking and workflow analysis to health services and health information management students enrolled in a course on the management of health information. The discussion includes a description of the design process, a brief history of the use of simulation in healthcare, and an explanation of how video simulation can be used to generate experiential learning environments. Based on the results of a survey given to 75 students as part of a formative evaluation, the video simulation was judged effective because it allowed students to visualize a real-world process (concrete experience), contemplate the scenes depicted in the video along with the concepts presented in class in a risk-free environment (reflection), develop hypotheses about why problems occurred in the workflow process (abstract conceptualization), and develop solutions to redesign a selected process (active experimentation). PMID:19412533

Increasing Active Participation and Engagement of Students in Circle Formations

ERIC Educational Resources Information Center

St. Onge, Justin; Eite, Karla

2017-01-01

Participation and engagement are important factors in students' academic achievement and in increasing interest and motivation in the learning process. This study evaluates participation and engagement in circle formations in both outdoor and indoor education settings. Over a four-week study period, four instructors collected data on different…

The sensitivities of in cloud and cloud top phase distributions to primary ice formation in ICON-LEM

NASA Astrophysics Data System (ADS)

Beydoun, H.; Karrer, M.; Tonttila, J.; Hoose, C.

2017-12-01

Mixed phase clouds remain a leading source of uncertainty in our attempt to quantify cloud-climate and aerosol-cloud climate interactions. Nevertheless, recent advances in parametrizing the primary ice formation process, high resolution cloud modelling, and retrievals of cloud phase distributions from satellite data offer an excellent opportunity to conduct closure studies on the sensitivity of the cloud phase to microphysical and dynamical processes. Particularly, the reliability of satellite data to resolve the phase at the top of the cloud provides a promising benchmark to compare model output to. We run large eddy simulations with the new ICOsahedral Non-hydrostatic atmosphere model (ICON) to place bounds on the sensitivity of in cloud and cloud top phase to the primary ice formation process. State of the art primary ice formation parametrizations in the form of the cumulative ice active site density ns are implemented in idealized deep convective cloud simulations. We exploit the ability of ICON-LEM to switch between a two moment microphysics scheme and the newly developed Predicted Particle Properties (P3) scheme by running our simulations in both configurations for comparison. To quantify the sensitivity of cloud phase to primary ice formation, cloud ice content is evaluated against order of magnitude changes in ns at variable convective strengths. Furthermore, we assess differences between in cloud and cloud top phase distributions as well as the potential impact of updraft velocity on the suppression of the Wegener-Bergeron-Findeisen process. The study aims to evaluate our practical understanding of primary ice formation in the context of predicting the structure and evolution of mixed phase clouds.

Sediment infilling and wetland formation dynamics in an active crevasse splay of the Mississippi River delta

USGS Publications Warehouse

Cahoon, Donald R.; White, David A.; Lynch, James C.

2011-01-01

Crevasse splay environments provide a mesocosm for evaluating wetland formation and maintenance processes on a decadal time scale. Site elevation, water levels, vertical accretion, elevation change, shallow subsidence, and plant biomass were measured at five habitats along an elevation gradient to evaluate wetland formation and development in Brant Pass Splay; an active crevasse splay of the Balize delta of the Mississippi River. The processes of vertical development (vertical accretion, elevation change, and shallow subsidence) were measured with the surface elevation table–marker horizon method. There were three distinct stages to the accrual of elevation capital and wetland formation in the splay: sediment infilling, vegetative colonization, and development of a mature wetland community. Accretion, elevation gain, and shallow subsidence all decreased by an order of magnitude from the open water (lowest elevation) to the forest (highest elevation) habitats. Vegetative colonization occurred within the first growing season following emergence of the mud surface. An explosively high rate of below-ground production quickly stabilized the loosely consolidated sub-aerial sediments. After emergent vegetation colonization, vertical development slowed and maintenance of marsh elevation was driven both by sediment trapping by the vegetation and accumulation of plant organic matter in the soil. Continued vertical development and survival of the marsh then depended on the health and productivity of the plant community. The process of delta wetland formation is both complex and nonlinear. Determining the dynamics of wetland formation will help in understanding the processes driving the past building of the delta and in developing models for restoring degraded wetlands in the Mississippi River delta and other deltas around the world.

Simulation of the Processes of Formation of a Dust Cloud in a Vacuum and in the Absence of Gravitation

NASA Astrophysics Data System (ADS)

Avdeev, A. V.; Boreisho, A. S.; Ivakin, S. V.; Moiseev, A. A.; Savin, A. V.; Sokolov, E. I.; Smirnov, P. G.

2018-01-01

This article is devoted to the simulation of the processes of formation of dust clouds in the absence of gravitation, which is necessary for understanding the processes proceeding in dust clusters in outer space, upper planetary atmosphere, and on the surface of space objects, as well as for evaluating the possibilities of creating disperse structures with given properties. The chief aim of the simulation is to determine the general laws of the dynamics of the dust cloud at the initial stage of its formation. With the use of the original approach based on the particle-in-cell method that permits investigating the mechanics of large ensembles of particles on contemporary computational platforms, we consider the mechanics of a dusty medium in the process of its excitation in a closed container due to the vibration of the walls, and then in the process of particle scattering when the container opens in outer space. The main formation mechanisms of a dust formation have been elucidated, and the possibilities of mathematical simulation for predicting spatial and time characteristics of disperse structures have been shown.

Evaluation of the Transfer of Permanent Formation: Analysis of an Experience of Workshops on Astronomy

NASA Astrophysics Data System (ADS)

Cano, Elena; Fabregat, Jaime; Ros, Rosa M.

2016-08-01

In the framework of a European project to bring astronomy near to children, several permanent teachers training activities were developed. These actions included workshops with teachers from various stages of the educational system. This paper presents the process and results of the evaluation of that training program. It intends to assess the satisfaction of the participants, as well as their learning and their later transfer of formation to the classroom. Barriers encountered in the transfer of formation, some of them linked to the type of training method chosen and other factors derived from personal and institutional conditions, are outlined. Finally, some guidelines for improving the transfer of scientific formation to the classroom in the future are pointed out.

Perceptions and Cost-Analysis of a Multiple Mini-Interview in a Pharmacy School Admissions Process.

PubMed

Corelli, Robin L; Muchnik, Michael A; Beechinor, Ryan J; Fong, Gary; Vogt, Eleanor M; Cocohoba, Jennifer M; Tsourounis, Candy; Hudmon, Karen Suchanek

2015-11-25

To improve the quality of admissions interviews for a doctor of pharmacy program, using a multiple mini-interview (MMI) in place of the standard interview. Stakeholders completed an anonymous web-based survey. This study characterized perceptions of the MMI format across 3 major stakeholders (candidates, interviewers, admissions committee members) and included comparative cost estimates.Costs were estimated using human and facility resources from the 2012 cycle (standard format) and the 2013 cycle (MMI format). Most candidates (65%), interviewers (86%), and admissions committee members (79%) perceived the MMI format as effective for evaluating applicants, and most (59% of candidates, 84% of interviewers, 77% of committee members) agreed that the MMI format should be continued. Cost per candidate interviewed was $136.34 (standard interview) vs $75.30 (MMI). Perceptions of the MMI process were favorable across stakeholder groups, and this format was less costly per candidate interviewed.

Effect of high hydrostatic pressure on background microflora and furan formation in fruit purée based baby foods.

PubMed

Kultur, Gulcin; Misra, N N; Barba, Francisco J; Koubaa, Mohamed; Gökmen, Vural; Alpas, Hami

2018-03-01

The baby foods industry is currently seeking technologies to pasteurize products without formation of processing contaminants such as furan. This work demonstrates the applicability of high hydrostatic pressure (HHP) as a non-thermal decontamination intervention for fruit purée based baby foods. HHP processing was evaluated at 200, 300, and 400 MPa pressures, for 5, 10 and 15 min of treatment times at 25, 35 and 45 °C. HHP application at 400 MPa, 45 °C for 15 min ensured complete inactivation (about 6 log 10 ) of total mesophilic aerophiles, as well as yeasts and molds. No furan was detected in HHP processed products. Thus, the key advantage of HHP over thermal processing is the ability to achieve commercially acceptable microbiological inactivation while avoiding the formation of processing contaminants such as furan.

Excimer laser annealing: A gold process for CZ silicon junction formation

NASA Technical Reports Server (NTRS)

Wong, David C.; Bottenberg, William R.; Byron, Stanley; Alexander, Paul

1987-01-01

A cold process using an excimer laser for junction formation in silicon has been evaluated as a way to avoid problems associated with thermal diffusion. Conventional thermal diffusion can cause bulk precipitation of SiOx and SiC or fail to completely activate the dopant, leaving a degenerate layer at the surface. Experiments were conducted to determine the feasibility of fabricating high quality p-n junctions using a pulsed excimer laser for junction formation at remelt temperature with ion-implanted surfaces. Solar-cell efficiency exceeding 16 percent was obtained using Czochralski single-crystal silicon without benefit of back surface field or surface passivation. Characterization shows that the formation of uniform, shallow junctions (approximately 0.25 micron) by excimer laser scanning preserves the minority carrier lifetime that leads to high current collection. However, the process is sensitive to initial surface conditions and handling parameters that drive the cost up.

Applying Quantitative Approaches to the Formative Evaluation of Antismoking Campaign Messages

PubMed Central

Parvanta, Sarah; Gibson, Laura; Forquer, Heather; Shapiro-Luft, Dina; Dean, Lorraine; Freres, Derek; Lerman, Caryn; Mallya, Giridhar; Moldovan-Johnson, Mihaela; Tan, Andy; Cappella, Joseph; Hornik, Robert

2014-01-01

This article shares an in-depth summary of a formative evaluation that used quantitative data to inform the development and selection of promotional ads for the antismoking communication component of a social marketing campaign. A foundational survey provided cross-sectional data to identify beliefs about quitting smoking that campaign messages should target, as well as beliefs to avoid. Pretesting draft ads against quantitative indicators of message effectiveness further facilitated the selection and rejection of final campaign ads. Finally, we consider lessons learned from the process of balancing quantitative methods and judgment to make formative decisions about more and less promising persuasive messages for campaigns. PMID:24817829

Informatics in radiology (infoRAD): free DICOM image viewing and processing software for the Macintosh computer: what's available and what it can do for you.

PubMed

Escott, Edward J; Rubinstein, David

2004-01-01

It is often necessary for radiologists to use digital images in presentations and conferences. Most imaging modalities produce images in the Digital Imaging and Communications in Medicine (DICOM) format. The image files tend to be large and thus cannot be directly imported into most presentation software, such as Microsoft PowerPoint; the large files also consume storage space. There are many free programs that allow viewing and processing of these files on a personal computer, including conversion to more common file formats such as the Joint Photographic Experts Group (JPEG) format. Free DICOM image viewing and processing software for computers running on the Microsoft Windows operating system has already been evaluated. However, many people use the Macintosh (Apple Computer) platform, and a number of programs are available for these users. The World Wide Web was searched for free DICOM image viewing or processing software that was designed for the Macintosh platform or is written in Java and is therefore platform independent. The features of these programs and their usability were evaluated. There are many free programs for the Macintosh platform that enable viewing and processing of DICOM images. (c) RSNA, 2004.

Clinical Evaluation of Baccalaureate Nursing Students Using SBAR Format: Faculty versus Self Evaluation

ERIC Educational Resources Information Center

Saied, Hala; James, Joemol; Singh, Evangelin Jeya; Al Humaied, Lulawah

2016-01-01

Clinical training is of paramount importance in nursing education and clinical evaluation is one of the most challenging responsibilities of nursing faculty. The use of objective tools and criteria and involvement of the students in the evaluation process are some techniques to facilitate quality learning in the clinical setting. Aim: The aim of…

Using Personnel Evaluation To Focus on the Development of Teaching Skills: Faculty Ideas and University Policy.

ERIC Educational Resources Information Center

O'Leary, Neil; Fenton, Ray

The role of the personnel evaluation process in improving the performance of teachers as classroom communicators is explored by contrasting the personnel evaluation system of Alaska Pacific University (APU) with that of the Anchorage School District (Alaska). While the APU system offers little specification for formative evaluation activities, the…

Degradation of chloramphenicol by UV/chlorine treatment: Kinetics, mechanism and enhanced formation of halonitromethanes.

PubMed

Dong, Huiyu; Qiang, Zhimin; Hu, Jun; Qu, Jiuhui

2017-09-15

Ultraviolet (UV)/chlorine process is considered as an emerging advanced oxidation process for the degradation of micropollutants. This study investigated the degradation of chloramphenicol (CAP) and formation of disinfection by-products (DBPs) during the UV/chlorine treatment. It was found that CAP degradation was enhanced by combined UV/chlorine treatment compared to that of UV and chlorination treatment alone. The pseudo-first-order rate constant of the UV/chlorine process at pH 7.0 reached 0.016 s -1 , which was 10.0 and 2.0 folds that observed from UV and chlorination alone, respectively. The enhancement can be attributed to the formation of diverse radicals (HO and reactive chlorine species (RCSs)), and the contribution of RCSs maintained more stable than that of HO at pH 5.5-8.5. Meanwhile, enhanced DBPs formation during the UV/chlorine treatment was observed. Both the simultaneous formation and 24-h halonitromethanes formation potential (HNMsFP) were positively correlated with the UV/chlorine treatment time. Although the simultaneous trichloronitromethane (TCNM) formation decreased with the prolonged UV irradiation, TCNM dominated the formation of HNMs after 24 h (>97.0%). According to structural analysis of transformation by-products, both the accelerated CAP degradation and enhanced HNMs formation steps were proposed. Overall, the formation of diverse radicals during the UV/chlorine treatment accelerated the degradation of CAP, while also enhanced the formation of DBPs simultaneously, indicating the need for DBPs evaluation before the application of combined UV/chlorine process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Using formative research to lay the foundation for community level HIV prevention efforts: an example from the AIDS Community Demonstration Projects.

PubMed Central

Higgins, D L; O'Reilly, K; Tashima, N; Crain, C; Beeker, C; Goldbaum, G; Elifson, C S; Galavotti, C; Guenther-Grey, C

1996-01-01

The AIDS Community Demonstration Projects provided community-level HIV prevention interventions to historically hard-to-reach groups at high risk for HIV infection. The projects operated under a common research protocol which encompassed formative research, intervention delivery, process evaluation, and outcome evaluation. A formative research process specifically focusing on intervention development was devised to assist project staff in identifying, prioritizing, accessing, and understanding the intervention target groups. This process was central to the creation of interventions that were acceptable and unique to the target populations. Intended to be rapid, the process took 6 months to complete. Drawn from the disciplines of anthropology, community psychology, sociology, and public health, the formative research process followed distinct steps which included (a) defining the populations at high-risk for HIV; (b) gathering information about these populations through interviews with persons who were outside of, but who had contact with, the target groups (such as staff from the health department and alcohol and drug treatment facilities, as well as persons who interacted in an informal manner with the target groups, such as clerks in neighborhood grocery stores and bartenders); (c) interviewing people with access to the target populations (gatekeepers), and conducting observations in areas where these high-risk groups were reported to gather (from previous interviews); (d) interviewing members of these groups at high risk for HIV infection or transmission; and (e) systematically integrating information throughout the process. Semistructured interview schedules were used for all data collection in this process. This standardized systematic method yielded valuable information about the focal groups in each demonstration project site. The method, if adopted by others, would assist community intervention specialists in developing interventions that are culturally appropriate and meaningful to their respective target populations. PMID:8862154

The NJOY Nuclear Data Processing System, Version 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macfarlane, Robert; Muir, Douglas W.; Boicourt, R. M.

The NJOY Nuclear Data Processing System, version 2016, is a comprehensive computer code package for producing pointwise and multigroup cross sections and related quantities from evaluated nuclear data in the ENDF-4 through ENDF-6 legacy card-image formats. NJOY works with evaluated files for incident neutrons, photons, and charged particles, producing libraries for a wide variety of particle transport and reactor analysis codes.

Designing an evaluation for a multiple-strategy community intervention: the North Coast Stay on Your Feet program.

PubMed

van Beurden, E; Kempton, A; Sladden, T; Garner, E

1998-02-01

Evaluation of the North Coast Stay on Your Feet falls prevention program is described as a case study of a comprehensive evaluation design for multi-strategic community interventions. Qualitative and quantitative methods were used to evaluate the program at formative, process and outcome levels. Formative evaluation used literature review, focus groups, mail-out and telephone survey methods to gather evidence from publications, older people, health workers, local business, media and government bodies. It included an analysis of demographic and hospital databases and identified incidence, causal pathways, knowledge, attitudes, behaviour, consequences and effectiveness of potential strategies. Process evaluation employed auditing, monitoring and telephone surveys to maintain an inventory of intervention activities and to track the reach of the program. Outcome evaluation involved a longitudinal study of intervention and control cohorts, surveyed before, during and after the intervention by telephone to monitor changes in knowledge, attitudes, risk and falls incidence. The survey instrument was designed for both formative and outcome evaluation, and analysis reflected the research design by incorporating repeat measures and adjusting for bias and confounding. Outcome validity was cross-checked via hospital admission rates. A novel, integrated framework for presenting inputs, activities and outcomes from all stages of the program is described. This framework facilitated feedback to stakeholders and enabled subsequent rapid adjustment of the intervention. Rigorous evaluation combined with clear presentation of findings helped to engender intersectoral support and obtain funding grants for extended implementation and evaluation. It also helped Stay on Your Feet to become a model for other falls prevention programs within Australia and internationally.

Collisional and dynamical processes in moon and planet formation

NASA Technical Reports Server (NTRS)

1979-01-01

The collisional and dynamical processes in moon and planet formation are discussed. A hydrodynamic code of collision calculations, the orbital element changes due to gravitational scattering, a validation of the mass shifting algorithm, a theory of rotations, and the origin of asteroids are studied. A numerical model of planet growth is discussed and a methodology to evaluate the rate at which megaregolith increases its depth as a function of total accumulate number of impacts on an initially smooth, coherent surface is described.

Methodological Reflections on the Contribution of Qualitative Research to the Evaluation of Clinical Ethics Support Services.

PubMed

Wäscher, Sebastian; Salloch, Sabine; Ritter, Peter; Vollmann, Jochen; Schildmann, Jan

2017-05-01

This article describes a process of developing, implementing and evaluating a clinical ethics support service intervention with the goal of building up a context-sensitive structure of minimal clinical-ethics in an oncology department without prior clinical ethics structure. Scholars from different disciplines have called for an improvement in the evaluation of clinical ethics support services (CESS) for different reasons over several decades. However, while a lot has been said about the concepts and methodological challenges of evaluating CESS up to the present time, relatively few empirical studies have been carried out. The aim of this article is twofold. On the one hand, it describes a process of development, modifying and evaluating a CESS intervention as part of the ETHICO research project, using the approach of qualitative-formative evaluation. On the other hand, it provides a methodological analysis which specifies the contribution of qualitative empirical methods to the (formative) evaluation of CESS. We conclude with a consideration of the strengths and limitations of qualitative evaluation research with regards to the evaluation and development of context sensitive CESS. We further discuss our own approach in contrast to rather traditional consult or committee models. © 2017 John Wiley & Sons Ltd.

Continuous Evaluation in Ethics Education: A Case Study.

PubMed

McIntosh, Tristan; Higgs, Cory; Mumford, Michael; Connelly, Shane; DuBois, James

2018-04-01

A great need for systematic evaluation of ethics training programs exists. Those tasked with developing an ethics training program may be quick to dismiss the value of training evaluation in continuous process improvement. In the present effort, we use a case study approach to delineate how to leverage formative and summative evaluation measures to create a high-quality ethics education program. With regard to formative evaluation, information bearing on trainee reactions, qualitative data from the comments of trainees, in addition to empirical findings, can ensure that the training program operates smoothly. Regarding summative evaluation, measures examining trainee cognition, behavior, and organization-level results provide information about how much trainees have changed as a result of taking the ethics training. The implications of effective training program evaluation are discussed.

ENDF-6 Formats Manual Data Formats and Procedures for the Evaluated Nuclear Data File ENDF/B-VI and ENDF/B-VII

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herman, M.; Members of the Cross Sections Evaluation Working Group

2009-06-01

In December 2006, the Cross Section Evaluation Working Group (CSEWG) of the United States released the new ENDF/B-VII.0 library. This represented considerable achievement as it was the 1st major release since 1990 when ENDF/B-VI has been made publicly available. The two libraries have been released in the same format, ENDF-6, which has been originally developed for the ENDF/B-VI library. In the early stage of work on the VII-th generation of the library CSEWG made important decision to use the same formats. This decision was adopted even though it was argued that it would be timely to modernize the formats andmore » several interesting ideas were proposed. After careful deliberation CSEWG concluded that actual implementation would require considerable resources needed to modify processing codes and to guarantee high quality of the files processed by these codes. In view of this the idea of format modernization has been postponed and ENDF-6 format was adopted for the new ENDF/B-VII library. In several other areas related to ENDF we made our best to move beyond established tradition and achieve maximum modernization. Thus, the 'Big Paper' on ENDF/B-VII.0 has been published, also in December 2006, as the Special Issue of Nuclear Data Sheets 107 (1996) 2931-3060. The new web retrieval and plotting system for ENDF-6 formatted data, Sigma, was developed by the NNDC and released in 2007. Extensive paper has been published on the advanced tool for nuclear reaction data evaluation, EMPIRE, in 2007. This effort was complemented with release of updated set of ENDF checking codes in 2009. As the final item on this list, major revision of ENDF-6 Formats Manual was made. This work started in 2006 and came to fruition in 2009 as documented in the present report.« less

The Inclusion of Self-Assessment in Merit Evaluation

ERIC Educational Resources Information Center

Rigler, Kenneth L.; Cook-Benjamin, Lorie; Wieland, Regi; Tholstrup, Carrie

2016-01-01

The purpose of this survey study was to collect faculty perceptions toward changes made to the faculty merit evaluation process in a college of education at a state comprehensive university. The changes in the evaluation occurred over a two-year period, where a formative rubric and faculty self-assessment were incorporated into the merit…

Analysis and evaluation in the production process and equipment area of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Wolf, M.

1981-01-01

The effect of solar cell metallization pattern design on solar cell performance and the costs and performance effects of different metallization processes are discussed. Definitive design rules for the front metallization pattern for large area solar cells are presented. Chemical and physical deposition processes for metallization are described and compared. An economic evaluation of the 6 principal metallization options is presented. Instructions for preparing Format A cost data for solar cell manufacturing processes from UPPC forms for input into the SAMIC computer program are presented.

Adoption? Adaptation? Evaluating the Formation of Educational Expectations

ERIC Educational Resources Information Center

Andrew, Megan; Hauser, Robert M.

2011-01-01

Sociologists have long used educational expectations to understand the complex mental processes underlying individuals' educational decision making. Yet, little research evaluates how students actually formulate their educational expectations. Status attainment theory asserts that students adopt their educational expectations early based on family…

Development of a theory- and evidence-based intervention to enhance implementation of physical therapy guidelines for the management of low back pain

PubMed Central

2014-01-01

Background Systematic planning could improve the generally moderate effectiveness of interventions to enhance adherence to clinical practice guidelines. The aim of our study was to demonstrate how the process of Intervention Mapping was used to develop an intervention to address the lack of adherence to the national CPG for low back pain by Dutch physical therapists. Methods We systematically developed a program to improve adherence to the Dutch physical therapy guidelines for low back pain. Based on multi-method formative research, we formulated program and change objectives. Selected theory-based methods of change and practical applications were combined into an intervention program. Implementation and evaluation plans were developed. Results Formative research revealed influential determinants for physical therapists and practice quality managers. Self-regulation was appropriate because both the physical therapists and the practice managers needed to monitor current practice and make and implement plans for change. The program stimulated interaction between practice levels by emphasizing collective goal setting. It combined practical applications, such as knowledge transfer and discussion-and-feedback, based on theory-based methods, such as consciousness raising and active learning. The implementation plan incorporated the wider environment. The evaluation plan included an effect and process evaluation. Conclusions Intervention Mapping is a useful framework for formative data in program planning in the field of clinical guideline implementation. However, a decision aid to select determinants of guideline adherence identified in the formative research to analyse the problem may increase the efficiency of the application of the Intervention Mapping process. PMID:24428945

Development of a theory- and evidence-based intervention to enhance implementation of physical therapy guidelines for the management of low back pain.

PubMed

Rutten, Geert M; Harting, Janneke; Bartholomew, Leona K; Braspenning, Jozé C; van Dolder, Rob; Heijmans, Marcel Fgj; Hendriks, Erik Jm; Kremers, Stef Pj; van Peppen, Roland Ps; Rutten, Steven Tj; Schlief, Angelique; de Vries, Nanne K; Oostendorp, Rob Ab

2014-01-15

Systematic planning could improve the generally moderate effectiveness of interventions to enhance adherence to clinical practice guidelines. The aim of our study was to demonstrate how the process of Intervention Mapping was used to develop an intervention to address the lack of adherence to the national CPG for low back pain by Dutch physical therapists. We systematically developed a program to improve adherence to the Dutch physical therapy guidelines for low back pain. Based on multi-method formative research, we formulated program and change objectives. Selected theory-based methods of change and practical applications were combined into an intervention program. Implementation and evaluation plans were developed. Formative research revealed influential determinants for physical therapists and practice quality managers. Self-regulation was appropriate because both the physical therapists and the practice managers needed to monitor current practice and make and implement plans for change. The program stimulated interaction between practice levels by emphasizing collective goal setting. It combined practical applications, such as knowledge transfer and discussion-and-feedback, based on theory-based methods, such as consciousness raising and active learning. The implementation plan incorporated the wider environment. The evaluation plan included an effect and process evaluation. Intervention Mapping is a useful framework for formative data in program planning in the field of clinical guideline implementation. However, a decision aid to select determinants of guideline adherence identified in the formative research to analyse the problem may increase the efficiency of the application of the Intervention Mapping process.

Approach jamming effectiveness evaluation for surface-type infrared decoy in network centric warship formation

NASA Astrophysics Data System (ADS)

Lv, Mingshan

2015-10-01

The passive and photoelectrical jamming to anti-ship missile in the condition of network centric warship formation is an important research issue of fleet EW operation. An approach jamming method of shipborne surface-type infrared decoy countering the infrared image guided anti-ship missile is put forward. By analyzing the countering process the jamming effectiveness evaluation model is constructed. By simulation the method is proved t reasonable and effective. This method breaks through the traditional restrict that the passive and photoelectricity jamming measure can only be used in the end self-defence and provides a new method for network centric worship formation to support each other.

A process evaluation of START NOW Skills Training for inmates with impulsive and aggressive behaviors.

PubMed

Shelton, Deborah; Wakai, Sara

2011-01-01

To conduct a formative evaluation of a treatment program designed for inmates with impulsive and aggressive behavior disorders in high-security facilities in Connecticut correctional facilities. Pencil-and-paper surveys and in-person inmate interviews were used to answer four evaluation questions. Descriptive statistics and content analyses were used to assess context, input, process, and products. A convenience sample of 26 adult male (18) and female (8) inmates participated in the study. Inmates were satisfied with the program (4-point scale, M = 3.38, SD = 0.75). Inmate hospital stays were reduced by 13.6%, and psychotropic medication use increased slightly (0.40%). Improved outcomes were noted for those inmates who attended more sessions. The findings of the formative evaluation were useful for moving the START NOW Skills Training treatment to the implementation phase. Recommendations for implementation modifications included development of an implementation team, reinforcement of training, and attention applied to uniform collection of outcome data to demonstrate its evidence base.

Analysis and evaluation in the production process and equipment area of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Wolf, M.; Goldman, H.

1981-01-01

The attributes of the various metallization processes were investigated. It is shown that several metallization process sequences will lead to adequate metallization for large area, high performance solar cells at a metallization add on price in the range of $6. to 12. m squared, or 4 to $.8/W(peak), assuming 15% efficiency. Conduction layer formation by thick film silver or by tin or tin/lead solder leads to metallization add-on prices significantly above the $6. to 12/m squared range c.) The wet chemical processes of electroless and electrolytic plating for strike/barrier layer and conduction layer formation, respectively, seem to be most cost effective.

The effect of fermentation and addition of vegetable oil on resistant starch formation in wholegrain breads.

PubMed

Buddrick, Oliver; Jones, Oliver A H; Hughes, Jeff G; Kong, Ing; Small, Darryl M

2015-08-01

Resistant starch has potential health benefits but the factors affecting its formation in bread and baked products are not well studied. Here, the formation of resistant starch in wholemeal bread products was evaluated in relation to the processing conditions including fermentation time, temperature and the inclusion of palm oil as a vitamin source. The effects of each the factor were assessed using a full factorial design. The impact on final starch content of traditional sourdough fermentation of wholemeal rye bread, as well as the bulk fermentation process of wheat and wheat/oat blends of wholemeal bread, was also assessed by enzyme assay. Palm oil content was found to have a significant effect on the formation of resistant starch in all of the breads while fermentation time and temperature had no significant impact. Sourdough fermentation of rye bread was found to have a greater impact on resistant starch formation than bulk fermentation of wheat and wheat blend breads, most likely due the increased organic acid content of the sourdough process. Copyright © 2015 Elsevier Ltd. All rights reserved.

Experimental study of PAM-4, CAP-16, and DMT for 100 Gb/s short reach optical transmission systems.

PubMed

Zhong, Kangping; Zhou, Xian; Gui, Tao; Tao, Li; Gao, Yuliang; Chen, Wei; Man, Jiangwei; Zeng, Li; Lau, Alan Pak Tao; Lu, Chao

2015-01-26

Advanced modulation formats combined with digital signal processing and direct detection is a promising way to realize high capacity, low cost and power efficient short reach optical transmission system. In this paper, we present a detailed investigation on the performance of three advanced modulation formats for 100 Gb/s short reach transmission system. They are PAM-4, CAP-16 and DMT. The detailed digital signal processing required for each modulation format is presented. Comprehensive simulations are carried out to evaluate the performance of each modulation format in terms of received optical power, transmitter bandwidth, relative intensity noise and thermal noise. The performance of each modulation format is also experimentally studied. To the best of our knowledge, we report the first demonstration of a 112 Gb/s transmission over 10km of SSMF employing single band CAP-16 with EML. Finally, a comparison of computational complexity of DSP for the three formats is presented.

SAR processing using SHARC signal processing systems

NASA Astrophysics Data System (ADS)

Huxtable, Barton D.; Jackson, Christopher R.; Skaron, Steve A.

1998-09-01

Synthetic aperture radar (SAR) is uniquely suited to help solve the Search and Rescue problem since it can be utilized either day or night and through both dense fog or thick cloud cover. Other papers in this session, and in this session in 1997, describe the various SAR image processing algorithms that are being developed and evaluated within the Search and Rescue Program. All of these approaches to using SAR data require substantial amounts of digital signal processing: for the SAR image formation, and possibly for the subsequent image processing. In recognition of the demanding processing that will be required for an operational Search and Rescue Data Processing System (SARDPS), NASA/Goddard Space Flight Center and NASA/Stennis Space Center are conducting a technology demonstration utilizing SHARC multi-chip modules from Boeing to perform SAR image formation processing.

Problem Solving in Biology: A Methodology

ERIC Educational Resources Information Center

Wisehart, Gary; Mandell, Mark

2008-01-01

A methodology is described that teaches science process by combining informal logic and a heuristic for rating factual reliability. This system facilitates student hypothesis formation, testing, and evaluation of results. After problem solving with this scheme, students are asked to examine and evaluate arguments for the underlying principles of…

Lifetime evaluation of large format CMOS mixed signal infrared devices

NASA Astrophysics Data System (ADS)

Linder, A.; Glines, Eddie

2015-09-01

New large scale foundry processes continue to produce reliable products. These new large scale devices continue to use industry best practice to screen for failure mechanisms and validate their long lifetime. The Failure-in-Time analysis in conjunction with foundry qualification information can be used to evaluate large format device lifetimes. This analysis is a helpful tool when zero failure life tests are typical. The reliability of the device is estimated by applying the failure rate to the use conditions. JEDEC publications continue to be the industry accepted methods.

Peer-supported review of teaching: an evaluation.

PubMed

Thampy, Harish; Bourke, Michael; Naran, Prasheena

2015-09-01

Peer-supported review (also called peer observation) of teaching is a commonly implemented method of ascertaining teaching quality that supplements student feedback. A large variety of scheme formats with rather differing purposes are described in the literature. They range from purely formative, developmental formats that facilitate a tutor's reflection of their own teaching to reaffirm strengths and identify potential areas for development through to faculty- or institution-driven summative quality assurance-based schemes. Much of the current literature in this field focuses within general higher education and on the development of rating scales, checklists or observation tools to help guide the process. This study reports findings from a qualitative evaluation of a purely formative peer-supported review of teaching scheme that was implemented for general practice clinical tutors at our medical school and describes tutors' attitudes and perceived benefits and challenges when undergoing observation.

SOA formation by biogenic and carbonyl compounds: data evaluation and application.

PubMed

Ervens, Barbara; Kreidenweis, Sonia M

2007-06-01

The organic fraction of atmospheric aerosols affects the physical and chemical properties of the particles and their role in the climate system. Current models greatly underpredict secondary organic aerosol (SOA) mass. Based on a compilation of literature studies that address SOA formation, we discuss different parameters that affect the SOA formation efficiency of biogenic compounds (alpha-pinene, isoprene) and aliphatic aldehydes (glyoxal, hexanal, octanal, hexadienal). Applying a simple model, we find that the estimated SOA mass after one week of aerosol processing under typical atmospheric conditions is increased by a few microg m(-3) (low NO(x) conditions). Acid-catalyzed reactions can create > 50% more SOA mass than processes under neutral conditions; however, other parameters such as the concentration ratio of organics/NO(x), relative humidity, and absorbing mass are more significant. The assumption of irreversible SOA formation not limited by equilibrium in the particle phase or by depletion of the precursor leads to unrealistically high SOA masses for some of the assumptions we made (surface vs volume controlled processes).

A case study examining classroom instructional practices at a U.S. dental school.

PubMed

Behar-Horenstein, Linda S; Mitchell, Gail S; Dolan, Teresa A

2005-06-01

A case study is used to illustrate how an evaluation strategy was used to assess classroom instructional practices following a multiyear institutional curriculum revision process. From January through April of 2003, twelve faculty in medicine and three faculty in dentistry who taught in the first- and second-year basic science courses within the dental curriculum participated in a qualitative study. The purpose was to use a formative evaluation process to assess the impact of the curriculum revision at the level of classroom instruction. The observations revealed that seventeen of the twenty classes observed were teacher-centered, passive, and lacked observable effort to help students understand the relationship of the lecture content to the oral health problems. Findings illustrate the importance of using formative evaluation as a mechanism to assess change efforts and how evidence-based study can be used to support initiatives directed toward assessing active student learning and problem solving. Raising faculty awareness about the importance of acquiring evidence-based educational skills, aligning instruction with course goals and objectives, formatively assessing teaching, and providing learning experiences that will actually be used in practice are essential to ensuring that active learning and critical thinking are demonstrated in the curriculum.

A review of biostratigraphic studies in the olistostrome deposits of Karangsambung Formation

NASA Astrophysics Data System (ADS)

Hendrizan, Marfasran

2018-02-01

Planktonic foraminifera is widely used for marine sediment biostratigraphy. Foraminiferal biostratigraphy of Karangsambung Formation is relatively rare to be investigated by previous researchers. A review of foraminiferal biostratigraphy is expected to be early work to perform a research about the ages of Tertiary rock formations in Karangsambung. The research area is formed by olistostrome process; a sedimentary slide deposit characterized by bodies of harder rock mixed and dispersed in a matrix. Biostratigraphic studies based on foraminifera and nannoplankton in Karangsambung Formation are still qualitative analysis using fossils biomarker. However, the age of this formation is still debatable based on foraminifera and nannofossil analysis. Two explanations of debatable ages in Karangsambung Formation that is possibly developed in Karangsambung area: firstly, Karangsambung Formation is characterized by normal sedimentation in some places and other regions such Kali Welaran and Clebok, Village as a product of olistostrome, and secondly, Karangsambung Formation is olistostrome deposit. However, micropaleontology sampling and analysis in matrix clays from olistostrome were ignored causing biostratigraphical results in those matrix clays occurred in normal sedimentation process and achieving the age of middle Eocene to Oligocene. We suppose previous authors picked samples in matrix of Karangsambung Formation from several river sections, which will make misinterpretation of the age of Karangsambung Formation. The age of middle to late Eocene probably is the dates of the older sediment that was reworked by sliding and sampling process and accumulated in Karangsambung Formation. The date of Karangsambung Fm is in Oligocene period based on a finding of several calcareous nannofossils. Detailed micropaleontological analysis of olistostrome deposits in Karangsambung Formation should be reevaluated for new finding of the accurate dating. Re-evaluation should start from detailed sedimentological mapping of Karangsambung Fm transects based on previous authors especially Kali Welaran, Jatibungkus transect and Clebok section followed by systematic sampling of normal sedimentation process from olistostrome products and matrix clays of olistostrome Karangsambung Formation. Finally, quantitative method of micropaleontological analysis can be applied to identify the age of Karangsambung Formation.

Detection of microbial biofilms on food processing surfaces: Hyperspectral fluorescence imaging study

USDA-ARS?s Scientific Manuscript database

We used a portable hyperspectral fluorescence imaging system to evaluate biofilm formations on four types of food processing surface materials including stainless steel, polypropylene used for cutting boards, and household counter top materials such as formica and granite. The objective of this inve...

Evaluation of a ureteral catheter coating by means of a BioEncrustation in vitro model.

PubMed

Frant, M; Dayyoub, E; Bakowsky, U; Liefeith, K

2018-05-09

Biomaterials for applications in the urinary tract are challenged with both biofilm formation and encrustation, two highly interconnected processes. While great effort has been achieved developing promising materials there is only a limited choice of sophisticated in vitro models that are available to analyse the performance of biomaterials prior to performing delicate and expensive in vivo studies. In this study we present a complex BioEncrustation model that imitates both the processes of multi-species biofilm formation and encrustation in vitro. The resulting crystalline biofilms are compared to the deposits found on explanted ureteral stent surfaces (in vivo situation) and to deposits formed in an experimental set up that does not contain bacteria (Encrustator ® ). Further focus of this study is dedicated to employing the developed BioEncrustation model to evaluate the effect multifunctional coatings impose on the processes of biofilm formation and encrustation under in vitro conditions. The investigated TANP coating combines unspecific and broad band specific antibacterial properties with a degrading polymer matrix that is intended to inhibit crystal formation. The coating was prepared on both polyurethane and silicone tubes and the subsequent results of the in vitro BioEncrustation analyses reveal a promising potential for employing the coating to render ureteral stent surfaces more biocompatible. Copyright © 2018 Elsevier B.V. All rights reserved.

Development and implementation of an independence rating scale and evaluation process for nursing orientation of new graduates.

PubMed

Durkin, Gregory J

2010-01-01

A wide variety of evaluation formats are available for new graduate nurses, but most of them are single-point evaluation tools that do not provide a clear picture of progress for orientee or educator. This article describes the development of a Web-based evaluation tool that combines learning taxonomies with the Synergy model into a rating scale based on independent performance. The evaluation tool and process provides open 24/7 access to evaluation documentation for members of the orientation team, demystifying the process and clarifying expectations. The implementation of the tool has proven to be transformative in the perceptions of evaluation and performance expectations of new graduates. This tool has been successful at monitoring progress, altering education, and opening dialogue about performance for over 125 new graduate nurses since inception.

Three-dimensional laser window formation

NASA Technical Reports Server (NTRS)

Verhoff, Vincent G.

1992-01-01

The NASA Lewis Research Center has developed and implemented a unique process for forming flawless three-dimensional laser windows. These windows represent a major part of specialized, nonintrusive laser data acquisition systems used in a variety of compressor and turbine research test facilities. This report discusses in detail the aspects of three-dimensional laser window formation. It focuses on the unique methodology and the peculiarities associated with the formation of these windows. Included in this discussion are the design criteria, bonding mediums, and evaluation testing for three-dimensional laser windows.

A computational reinvestigation of the formation of N-alkylpyrroles via intermolecular redox amination.

PubMed

Xue, Xiaosong; Yu, Ao; Cai, Yu; Cheng, Jin-Pei

2011-11-18

A detailed mechanism of N-alkylpyrrole formation from 3-pyrroline and 2-phenylpropanal in the presence of a Brønsted acid catalyst was investigated in depth using the MP2 and DFT theories. The two mechanisms proposed earlier in recent literatures for this internal redox process were evaluated and were found not to account perfectly for the transition state and the energetic barrier of its formation. Based on the present calculations, a new mechanism was put forth.

Item and Test Construct Definition for the New Spanish Baccalaureate Final Evaluation: A Proposal

ERIC Educational Resources Information Center

Laborda, Jesús García; Martin-Monje, Elena

2013-01-01

The current English section of the University Entrance Examination (PAU) has kept the same format for twenty years. The Bologna process has provided new reasons to vary its current format, since the majority of international reputed tests usually include oral sections with both listening and speaking tasks. Recently the Universidad de Alcalá…

Multiple and mixed methods in formative evaluation: Is more better? Reflections from a South African study.

PubMed

Odendaal, Willem; Atkins, Salla; Lewin, Simon

2016-12-15

Formative programme evaluations assess intervention implementation processes, and are seen widely as a way of unlocking the 'black box' of any programme in order to explore and understand why a programme functions as it does. However, few critical assessments of the methods used in such evaluations are available, and there are especially few that reflect on how well the evaluation achieved its objectives. This paper describes a formative evaluation of a community-based lay health worker programme for TB and HIV/AIDS clients across three low-income communities in South Africa. It assesses each of the methods used in relation to the evaluation objectives, and offers suggestions on ways of optimising the use of multiple, mixed-methods within formative evaluations of complex health system interventions. The evaluation's qualitative methods comprised interviews, focus groups, observations and diary keeping. Quantitative methods included a time-and-motion study of the lay health workers' scope of practice and a client survey. The authors conceptualised and conducted the evaluation, and through iterative discussions, assessed the methods used and their results. Overall, the evaluation highlighted programme issues and insights beyond the reach of traditional single methods evaluations. The strengths of the multiple, mixed-methods in this evaluation included a detailed description and nuanced understanding of the programme and its implementation, and triangulation of the perspectives and experiences of clients, lay health workers, and programme managers. However, the use of multiple methods needs to be carefully planned and implemented as this approach can overstretch the logistic and analytic resources of an evaluation. For complex interventions, formative evaluation designs including multiple qualitative and quantitative methods hold distinct advantages over single method evaluations. However, their value is not in the number of methods used, but in how each method matches the evaluation questions and the scientific integrity with which the methods are selected and implemented.

Situated Research Design and Methodological Choices in Formative Program Evaluation

ERIC Educational Resources Information Center

Supovitz, Jonathan

2013-01-01

Design-based implementation research offers the opportunity to rethink the relationships between intervention, research, and situation to better attune research and evaluation to the program development process. Using a heuristic called the intervention development curve, I describe the rough trajectory that programs typically follow as they…

Diagnostic Evaluation of Ozone Production and Horizontal Transport in a Regional Photochemical Air Quality Modeling System

EPA Science Inventory

A diagnostic model evaluation effort has been performed to focus on photochemical ozone formation and the horizontal transport process since they strongly impact the temporal evolution and spatial distribution of ozone (O₃) within the lower troposphere. Results from th...

Evaluating Technology Integration in the Elementary School: A Site-Based Approach.

ERIC Educational Resources Information Center

Mowe, Richard

This book enables educators at the elementary level to conduct formative evaluations of their technology programs in minimum time. Most of the technology is computer related, including word processing, graphics, desktop publishing, spreadsheets, databases, instructional software, programming, and telecommunications. The design of the book is aimed…

Competency Based Education Curriculum for Data Processing.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

This curriculum for data processing is organized into four learning modules. Each module is comprised of four to seven competencies. A student competency sheet provided for each competency is organized into this format: module and competency number and name, performance guide, learning activities, and an evaluation. Where appropriate, student…

Latent Image Processing Can Bolster the Value of Quizzes.

ERIC Educational Resources Information Center

Singer, David

1985-01-01

Latent image processing is a method which reveals hidden ink when marked with a special pen. Using multiple-choice items with commercially available latent image transfers can provide immediate feedback on take-home quizzes. Students benefitted from formative evaluation and were challenged to search for alternative solutions and explain unexpected…

Monitoring TCE Degradation by In-situ Bioremediation in TCE-Contaminated site

NASA Astrophysics Data System (ADS)

Han, K.; Hong, U.; Ahn, G.; Jiang, H.; Yoo, H.; Park, S.; Kim, N.; Ahn, H.; Kwon, S.; Kim, Y.

2012-12-01

Trichloroethylene (TCE) is a long-term common groundwater pollutant because the compound with high density is slowly released into groundwater. Physical and chemical remediation processes have been used to clean-up the contaminant, but novel remediation technology is required to overcome a low efficiency of the traditional treatment process. Many researchers focused on biological process using an anaerobic TCE degrading culture, but it still needs to evaluate whether the process can be applied into field scale under aerobic condition. Therefore, in this work we investigated two different tests (i.e., biostimulation and bioaugmentation) of biological remediation through the Well-to-Well test (injection well to extraction well) in TCE-contaminated site. Also solutions (Electron donor & acceptor, tracer) were injected into the aquifer using a liquid coupled with nitrogen gas sparging. In biostimulation, we use 3 phases to monitoring biological remediation. Phase 1: we inject formate solution to get electron donor hydrogen (hydrogen can be generated from fermentation of formate). We also inject bromide as tracer. Phase 2: we made injection solution by formate, bromide and sulfate. The reason why we inject sulfate is that as a kind of electron accepter, sulfate reduction process is helpful to create anaerobic condition. Phase 3: we inject mixed solution made by formate, sulfate, fumarate, and bromide. The degradation of fumarate has the same mechanism and condition with TCE degradation, so we added fumarate to make sure that if the anaerobic TCE degradation by indigenous microorganisms started up (Because low TCE concentration by gas sparging). In the bioaugmentation test, we inject the Evanite culture (containing dehalococcoides spp) and TCE degradation to c-DCE, VC, ETH was monitored. We are evaluating the transport of the Evanite culture in the field by measuring TCE and VC reductases.

Putting habit into practice, and practice into habit: a process evaluation and exploration of the acceptability of a habit-based dietary behaviour change intervention.

PubMed

Gardner, Benjamin; Sheals, Kate; Wardle, Jane; McGowan, Laura

2014-10-30

Forming 'habit' - defined as a learned process that generates automatic responses to contextual cues - has been suggested as a mechanism for behaviour maintenance, but few studies have applied habit theory to behaviour change. This study used process evaluation data, taken from a randomised controlled trial of a healthy child-feeding intervention for parents previously shown to be effective, to explore the applicability to dietary behaviour change of predictions and recommendations drawn from habit theory. The intervention supported parents in pursuing child-feeding habit goals in three domains (giving fruit and vegetables, water, healthy snacks), over four fortnightly home visits. We explored whether (a) the habit-formation model was acceptable to participants, (b) better-specified habit-formation goals yielded greater habit gains, and (c) habit gains were sustained (d) even when subsequent, new habit goals were pursued. Qualitative and quantitative data were taken from 57 parents randomised to the intervention arm, and so analyses presented here used a pre-post intervention design. Thematic analysis of post-intervention qualitative interviews evaluated acceptability, and self-reported habit goals were content-analysed. ANOVAs explored changes in habit strength, recorded at home visits and one- and two-month follow-ups, across time and goals. Participants understood and engaged positively with the habit-formation approach. Although many seemingly poorly-specified habit goals were set, goal characteristics had minimal impact on habit strength, which were achieved within two weeks for all behaviours (p's < .001), and were maintained or had increased further by the final follow-up. The habit-formation model appears to be an acceptable and fruitful basis for dietary behaviour change.

Ultrafast microfluidic mixer for tracking the early folding kinetics of human telomere G-quadruplex.

PubMed

Li, Ying; Liu, Chao; Feng, Xiaojun; Xu, Youzhi; Liu, Bi-Feng

2014-05-06

The folding of G-quadruplex is hypothesized to undergo a complex process, from the formation of a hairpin structure to a triplex intermediate and to the final G-quadruplex. Currently, no experimental evidence has been found for the hairpin formation, because it folds in the time regime of 10-100 μs, entailing the development of microfluidic mixers with a mixing time of less than 10 μs. In this paper, we reported an ultrarapid micromixer with a mixing time of 5.5 μs, which represents the fastest turbulent micromixer to our best knowledge. Evaluations of the micromixer were conducted to confirm its mixing efficiency for small molecules and macromolecules. This new micromixer enabled us to interrogate the hairpin formation in the early folding process of human telomere G-quadruplex. The experimental kinetic evidence for the formation of hairpin was obtained for the first time.

Terabit bandwidth-adaptive transmission using low-complexity format-transparent digital signal processing.

PubMed

Zhuge, Qunbi; Morsy-Osman, Mohamed; Chagnon, Mathieu; Xu, Xian; Qiu, Meng; Plant, David V

2014-02-10

In this paper, we propose a low-complexity format-transparent digital signal processing (DSP) scheme for next generation flexible and energy-efficient transceiver. It employs QPSK symbols as the training and pilot symbols for the initialization and tracking stage of the receiver-side DSP, respectively, for various modulation formats. The performance is numerically and experimentally evaluated in a dual polarization (DP) 11 Gbaud 64QAM system. Employing the proposed DSP scheme, we conduct a system-level study of Tb/s bandwidth-adaptive superchannel transmissions with flexible modulation formats including QPSK, 8QAM and 16QAM. The spectrum bandwidth allocation is realized in the digital domain instead of turning on/off sub-channels, which improves the performance of higher order QAM. Various transmission distances ranging from 240 km to 6240 km are demonstrated with a colorless detection for hardware complexity reduction.

A Faculty Toolkit for Formative Assessment in Pharmacy Education.

PubMed

DiVall, Margarita V; Alston, Greg L; Bird, Eleanora; Buring, Shauna M; Kelley, Katherine A; Murphy, Nanci L; Schlesselman, Lauren S; Stowe, Cindy D; Szilagyi, Julianna E

2014-11-15

This paper aims to increase understanding and appreciation of formative assessment and its role in improving student outcomes and the instructional process, while educating faculty on formative techniques readily adaptable to various educational settings. Included are a definition of formative assessment and the distinction between formative and summative assessment. Various formative assessment strategies to evaluate student learning in classroom, laboratory, experiential, and interprofessional education settings are discussed. The role of reflective writing and portfolios, as well as the role of technology in formative assessment, are described. The paper also offers advice for formative assessment of faculty teaching. In conclusion, the authors emphasize the importance of creating a culture of assessment that embraces the concept of 360-degree assessment in both the development of a student's ability to demonstrate achievement of educational outcomes and a faculty member's ability to become an effective educator.

High Fidelity: Investing in Evaluation Training. Ask the Team

ERIC Educational Resources Information Center

Fetters, Jenni

2013-01-01

High-quality training is a crucial investment in establishing and maintaining implementation fidelity as well as building educators' trust in the new process. Training approaches for educator evaluation vary both in format (i.e., how it's delivered) and content (i.e., what is provided). Train-the-trainer sessions, online professional learning…

Year 1 Evaluation of Nebraska's Statewide Plan: Connecting Schools to the Internet.

ERIC Educational Resources Information Center

Topp, Neal W.; Grandgenett, Neal

1996-01-01

Reviews activities in the first year of a Nebraska plan to connect K-12 schools to the Internet, including: installing UNIX-based computers; developing a statewide training program; hiring; distributing support materials; and devising a formative evaluation process. Trends in teacher and student Internet use and eight projects in classroom…

GEAR UP Aspirations Project Evaluation

ERIC Educational Resources Information Center

Trimble, Brad A.

2013-01-01

The purpose of this study was to conduct a formative evaluation of the first two years of the Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP) Aspirations Project (Aspirations) using a Context, Input, Process, and Product (CIPP) model so as to gain an in-depth understanding of the project during the middle school…

Mobile Formative Assessment Tool Based on Data Mining Techniques for Supporting Web-Based Learning

ERIC Educational Resources Information Center

Chen, Chih-Ming; Chen, Ming-Chuan

2009-01-01

Current trends clearly indicate that online learning has become an important learning mode. However, no effective assessment mechanism for learning performance yet exists for e-learning systems. Learning performance assessment aims to evaluate what learners learned during the learning process. Traditional summative evaluation only considers final…

Evaluating Computer Integration in the Elementary School: A Step-by-Step Guide.

ERIC Educational Resources Information Center

Mowe, Richard

This handbook was written to enable elementary school educators to conduct formative evaluations of their computer integrated instruction (CII) programs in minimum time. CII is defined as the use of computer software, such as word processing, database, and graphics programs, to help students solve problems or work more productively. The first…

Flight test and evaluation of Omega navigation in a general aviation aircraft. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Howell, J. D.; Hoffman, W. C.; Hwoschinsky, P. V.; Wischmeyer, C. E.

1975-01-01

Detailed documentation for each flight of the Omega Flight Evaluation study is presented, including flight test description sheets and actual flight data plots. Computer programs used for data processing and flight planning are explained and the data formats utilized by the Custom Interface Unit are summarized.

The interaction of rhinal cortex and hippocampus in human declarative memory formation.

PubMed

Fell, Jürgen; Klaver, Peter; Elger, Christian E; Fernández, Guillén

2002-01-01

Human declarative memory formation crucially depends on processes within the medial temporal lobe (MTL). These processes can be monitored in real-time by recordings from depth electrodes implanted in the MTL of patients with epilepsy who undergo presurgical evaluation. In our studies, patients performed a word memorization task during depth EEG recording. Afterwards, the difference between event-related potentials (ERPs) corresponding to subsequently remembered versus forgotten words was analyzed. These kind of studies revealed that successful memory encoding is characterized by an early process generated by the rhinal cortex within 300 ms following stimulus onset. This rhinal process precedes a hippocampal process, which starts about 200 ms later. Further investigation revealed that the rhinal process seems to be a correlate of semantic preprocessing which supports memory formation, whereas the hippocampal process appears to be a correlate of an exclusively mnemonic operation. These studies yielded only indirect evidence for an interaction of rhinal cortex and hippocampus. Direct evidence for a memory related cooperation between both structures, however, has been found in a study analyzing so called gamma activity, EEG oscillations of around 40 Hz. This investigation showed that successful as opposed to unsuccessful memory formation is accompanied by an initial enhancement of rhinal-hippocampal phase synchronization, which is followed by a later desynchronization. Present knowledge about the function of phase synchronized gamma activity suggests that this phase coupling and decoupling initiates and later terminates communication between the two MTL structures. Phase synchronized rhinal-hippocampal gamma activity may, moreover, accomplish Hebbian synaptic modifications and thus provide an initial step of declarative memory formation on the synaptic level.

Systematic review of HIV prevention interventions in China: a health communication perspective.

PubMed

Xiao, Zhiwen; Noar, Seth M; Zeng, Lily

2014-02-01

To examine whether communication strategies and principles have been utilized in the HIV prevention intervention programs conducted in China. Comprehensive literature searches were conducted using PsycINFO, Medline, and Academic Search Complete with combinations of a number of keywords. Studies were included if they (1) were conducted in China and published prior to October 2011; (2) tested interventions promoting HIV/sexual risk reduction; and (3) reported empirical outcome evaluations on HIV knowledge, condom use and other condom-related variables. Data on 11 dimensions were extracted and analyzed, including formative research, theory, message targeting, messenger and channels, process evaluation, evaluation design, outcome measures. The majority of the 45 intervention studies were not theory-based, did not report conducting formative research or process evaluation, used pretest-posttest control group designs, combined nonmedia channels, printed and visual materials, and employed HIV knowledge and condom use as outcome measures. Many HIV prevention interventions in China have been successful in reducing HIV risk-related outcomes. This literature has its weaknesses; however, the current review illuminates gaps in the literature and points to important future directions for research.

Correlation between safety assessments in the driver-car interaction design process.

PubMed

Broström, Robert; Bengtsson, Peter; Axelsson, Jakob

2011-05-01

With the functional revolution in modern cars, evaluation methods to be used in all phases of driver-car interaction design have gained importance. It is crucial for car manufacturers to discover and solve safety issues early in the interaction design process. A current problem is thus to find a correlation between the formative methods that are used during development and the summative methods that are used when the product has reached the customer. This paper investigates the correlation between efficiency metrics from summative and formative evaluations, where the results of two studies on sound and navigation system tasks are compared. The first, an analysis of the J.D. Power and Associates APEAL survey, consists of answers given by about two thousand customers. The second, an expert evaluation study, was done by six evaluators who assessed the layouts by task completion time, TLX and Nielsen heuristics. The results show a high degree of correlation between the studies in terms of task efficiency, i.e. between customer ratings and task completion time, and customer ratings and TLX. However, no correlation was observed between Nielsen heuristics and customer ratings, task completion time or TLX. The results of the studies introduce a possibility to develop a usability evaluation framework that includes both formative and summative approaches, as the results show a high degree of consistency between the different methodologies. Hence, combining a quantitative approach with the expert evaluation method, such as task completion time, should be more useful for driver-car interaction design. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Evaluation of Preclinical Assays to Investigate an Anthroposophic Pharmaceutical Process Applied to Mistletoe (Viscum album L.) Extracts

PubMed Central

Flückiger, Heidi

2014-01-01

Extracts from European mistletoe (Viscum album L.) developed in anthroposophic medicine are based on specific pharmaceutical procedures to enhance remedy efficacy. One such anthroposophic pharmaceutical process was evaluated regarding effects on cancer cell toxicity in vitro and on colchicine tumor formation in Lepidium sativum. Anthroposophically processed Viscum album extract (APVAE) was produced by mixing winter and summer mistletoe extracts in the edge of a high-speed rotating disk and was compared with manually mixed Viscum album extract (VAE). The antiproliferative effect of VAE/APVAE was determined in five cell lines (NCI-H460, DU-145, HCC1143, MV3, and PA-TU-8902) by WST-1 assay in vitro; no difference was found between VAE and APVAE in any cell line tested (P > 0.14). Incidence of colchicine tumor formation was assessed by measurement of the root/shoot-ratio of seedlings of Lepidium sativum treated with colchicine as well as VAE, APVAE, or water. Colchicine tumor formation decreased after application of VAE (−5.4% compared to water, P < 0.001) and was even stronger by APVAE (−8.8% compared to water, P < 0.001). The high-speed mistletoe extract mixing process investigated thus did not influence toxicity against cancer cells but seemed to sustain morphostasis and to enhance resistance against external noxious influences leading to phenomenological malformations. PMID:24876872

Evaluation of the ion implantation process for production of solar cells from silicon sheet materials

NASA Technical Reports Server (NTRS)

Spitzer, M. B.

1983-01-01

The objective of this program is the investigation and evaluation of the capabilities of the ion implantation process for the production of photovoltaic cells from a variety of present-day, state-of-the-art, low-cost silicon sheet materials. Task 1 of the program concerns application of ion implantation and furnace annealing to fabrication of cells made from dendritic web silicon. Task 2 comprises the application of ion implantation and pulsed electron beam annealing (PEBA) to cells made from SEMIX, SILSO, heat-exchanger-method (HEM), edge-defined film-fed growth (EFG) and Czochralski (CZ) silicon. The goals of Task 1 comprise an investigation of implantation and anneal processes applied to dendritic web. A further goal is the evaluation of surface passivation and back surface reflector formation. In this way, processes yielding the very highest efficiency can be evaluated. Task 2 seeks to evaluate the use of PEBA for various sheet materials. A comparison of PEBA to thermal annealing will be made for a variety of ion implantation processes.

Protein Colloidal Aggregation Project

NASA Technical Reports Server (NTRS)

Oliva-Buisson, Yvette J. (Compiler)

2014-01-01

To investigate the pathways and kinetics of protein aggregation to allow accurate predictive modeling of the process and evaluation of potential inhibitors to prevalent diseases including cataract formation, chronic traumatic encephalopathy, Alzheimer's Disease, Parkinson's Disease and others.

Optimization of the Processing Parameters of High Temperature Superconducting Glass-Ceramics: Center Director's Discretionary Fund Final Report

NASA Technical Reports Server (NTRS)

Ethridge, E. C.; Kaukler, W. F.

1993-01-01

A number of promising glass forming compositions of high Tc superconducting Ba-Sr-Ca-Cu-O (BSCCO) materials were evaluated for their glass-ceramic crystallization ability. The BSCCO ceramics belonging to the class of superconductors in the Ba-Sr-Ca-Cu-O system were the focus of this study. By first forming the superconducting material as a glass, subsequent devitrification into the crystalline (glass-ceramic) superconductor can be performed by thermal processing of the glass preform body. Glass formability and phase formation were determined by a variety of methods in another related study. This study focused on the nucleation and crystallization of the materials. Thermal analysis during rapid cooling aids in the evaluation of nucleation and crystallization behavior. Melt viscosity is used to predict glass formation ability.

Approche du Processus d'Auto-Formation Inspiree de la Methode des "Histoires de vie" dans le cadre de la Formation continuee des institutrices maternelles en Communaute francaise de Belgique (Approach to the Process of Self-Instruction Inspired by the "Life History" Method in the Framework of the Continuing Education of Preschool Teachers in the French-Speaking Community in Belgium).

ERIC Educational Resources Information Center

Brandt, Madeleine

1994-01-01

Describes a study of the use of a critical events questionnaire and "educational biography" as means of training preschool teachers to question their role as teachers; to question their relationship with children; and to liberate their consciousness. Discusses the quantitative and qualitative results of the self-evaluation processes. (AC)

Evaluation of the physical process controlling beach changes adjacent to nearshore dredge pits

USGS Publications Warehouse

Benedet, L.; List, J.H.

2008-01-01

Numerical modeling of a beach nourishment project is conducted to enable a detailed evaluation of the processes associated with the effects of nearshore dredge pits on nourishment evolution and formation of erosion hot spots. A process-based numerical model, Delft3D, is used for this purpose. The analysis is based on the modification of existing bathymetry to simulate "what if" scenarios with/without the bathymetric features of interest. Borrow pits dredged about 30??years ago to provide sand for the nourishment project have a significant influence on project performance and formation of erosional hot spots. It was found that the main processes controlling beach response to these offshore bathymetric features were feedbacks between wave forces (roller force or alongshore component of the radiation stress), pressure gradients due to differentials in wave set-up/set-down and bed shear stress. Modeling results also indicated that backfilling of selected borrow sites showed a net positive effect within the beach fill limits and caused a reduction in the magnitude of hot spot erosion. ?? 2008 Elsevier B.V. All rights reserved.

TRMM Common Microphysics Products: A Tool for Evaluating Spaceborne Precipitation Retrieval Algorithms

NASA Technical Reports Server (NTRS)

Kingsmill, David E.; Yuter, Sandra E.; Hobbs, Peter V.; Rangno, Arthur L.; Heymsfield, Andrew J.; Stith, Jeffrey L.; Bansemer, Aaron; Haggerty, Julie A.; Korolev, Alexei V.

2004-01-01

A customized product for analysis of microphysics data collected from aircraft during field campaigns in support of the TRMM program is described. These Common Microphysics Products (CMP's) are designed to aid in evaluation of TRMM spaceborne precipitation retrieval algorithms. Information needed for this purpose (e.g., particle size spectra and habit, liquid and ice water content) was derived using a common processing strategy on the wide variety of microphysical instruments and raw native data formats employed in the field campaigns. The CMP's are organized into an ASCII structure to allow easy access to the data for those less familiar with and without the tools to accomplish microphysical data processing. Detailed examples of the CMP show its potential and some of its limitations. This approach may be a first step toward developing a generalized microphysics format and an associated community-oriented, non-proprietary software package for microphysics data processing, initiatives that would likely broaden community access to and use of microphysics datasets.

How do design features influence consumer attention when looking for nutritional information on food labels? Results from an eye-tracking study on pan bread labels.

PubMed

Antúnez, Lucía; Vidal, Leticia; Sapolinski, Alejandra; Giménez, Ana; Maiche, Alejandro; Ares, Gastón

2013-08-01

The aim of this work was to evaluate consumer visual processing of food labels when evaluating the salt content of pan bread labels and to study the influence of label design and nutritional labelling format on consumer attention. A total of 16 pan bread labels, designed according to a full factorial design, were presented to 52 participants, who were asked to decide whether the sodium content of each label was medium or low, while their eye movements were recorded using an eye tracker. Results showed that most participants looked at nutrition labels and the traffic light system to conclude on the salt content of the labels. However, the average percentage of participants who looked at the actual sodium content was much lower. Nutrition information format affected participants' processing of nutrition information. Among other effects, the inclusion of the traffic light system increased participants' attention towards some kind of nutrition information and facilitated its processing, but not its understanding.

Tailoring an educational program on the AHRQ Patient Safety Indicators to meet stakeholder needs: lessons learned in the VA.

PubMed

Shin, Marlena H; Rivard, Peter E; Shwartz, Michael; Borzecki, Ann; Yaksic, Enzo; Stolzmann, Kelly; Zubkoff, Lisa; Rosen, Amy K

2018-02-14

Given that patient safety measures are increasingly used for public reporting and pay-for performance, it is important for stakeholders to understand how to use these measures for improvement. The Agency for Healthcare Research and Quality (AHRQ) Patient Safety Indicators (PSIs) are one particularly visible set of measures that are now used primarily for public reporting and pay-for-performance among both private sector and Veterans Health Administration (VA) hospitals. This trend generates a strong need for stakeholders to understand how to interpret and use the PSIs for quality improvement (QI). The goal of this study was to develop an educational program and tailor it to stakeholders' needs. In this paper, we share what we learned from this program development process. Our study population included key VA stakeholders involved in reviewing performance reports and prioritizing and initiating quality/safety initiatives. A pre-program formative evaluation through telephone interviews and web-based surveys assessed stakeholders' educational needs/interests. Findings from the formative evaluation led to development and implementation of a cyberseminar-based program, which we tailored to stakeholders' needs/interests. A post-program survey evaluated program participants' perceptions about the PSI educational program. Interview data confirmed that the concepts we had developed for the interviews could be used for the survey. Survey results informed us on what program delivery mode and content topics were of high interest. Six cyberseminars were developed-three of which focused on two content areas that were noted of greatest interest: learning how to use PSIs for monitoring trends and understanding how to interpret PSIs. We also used snapshots of VA PSI reports so that participants could directly apply learnings. Although initial interest in the program was high, actual attendance was low. However, post-program survey results indicated that perceptions about the program were positive. Conducting a formative evaluation was a highly important process in program development. The useful information that we collected through the interviews and surveys allowed us to tailor the program to stakeholders' needs and interests. Our experiences, particularly with the formative evaluation process, yielded valuable lessons that can guide others when developing and implementing similar educational programs.

Nixtamalization Process Affects Resistant Starch Formation and Glycemic Index of Tamales.

PubMed

Mariscal-Moreno, Rosa María; de Dios Figueroa Cárdenas, Juan; Santiago-Ramos, David; Rayas-Duarte, Patricia; Veles-Medina, José Juan; Martínez-Flores, Héctor Eduardo

2017-05-01

Tamales were prepared with 3 nixtamalization processes (traditional, ecological, and classic) and evaluated for chemical composition, starch properties, and glycemic index. Resistant starch (RS) in tamales increased 1.6 to 3.7 times compared to raw maize. This increment was due to the starch retrogradation (RS3) and amylose-lipid complexes (RS5) formation. Tamales elaborated with classic and ecological nixtamalization processes exhibited the highest total, soluble and insoluble dietary fiber content, and the highest RS content and lower in vivo glycemic index compared to tamales elaborated with traditional nixtamalization process. Thermal properties of tamales showed 3 endotherms: amylopectin retrogradation (42.7 to 66.6 °C), melting of amylose lipid complex type I (78.8 to 105.4), and melting of amylose-lipid complex type II (110.7 to 129.7). Raw maize exhibited X-ray diffraction pattern type A, after nixtamalization and cooking of tamales it changed to V-type polymorph structure, due to amylose-lipid complexes formation. Tamales from ecological nixtamalization processes could represent potential health benefits associated with the reduction on blood glucose response after consumption. © 2017 Institute of Food Technologists®.

Study of aroma formation and transformation during the manufacturing process of Biluochun green tea in Yunnan Province by HS-SPME and GC-MS.

PubMed

Wang, Chen; Lv, Shidong; Wu, Yuanshuang; Lian, Ming; Gao, Xuemei; Meng, Qingxiong

2016-10-01

Biluochun is a typical non-fermented tea and is also famous for its unique aroma in China. Few studies have been performed to evaluate the effect of the manufacturing process on the formation and content of its aroma. The volatile components were extracted at different manufacturing process steps of Biluochun green tea using fully automated headspace solid-phase microextraction (HS-SPME) and further characterised by gas chromatography-mass spectrometry (GC-MS). Among 67 volatile components collected, the fractions of linalool oxides, β-ionone, phenylacetaldehyde, aldehydes, ketones, and nitrogen compounds were increased while alcohols and hydrocarbons declined during the manufacturing process. The aroma compounds decreased the most during the drying steps. We identified a number of significantly changed components that can be used as markers and quality control during the producing process of Biluochun. The drying step played a major role in the aroma formation of green tea products and should be the most important step for quality control. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Start-up of an anaerobic fluidized bed reactor treating synthetic carbohydrate rich wastewater.

PubMed

Yeshanew, Martha M; Frunzo, Luigi; Luongo, Vincenzo; Pirozzi, Francesco; Lens, Piet N L; Esposito, Giovanni

2016-12-15

The present work studied the start-up process of a mesophilic (37 ± 2 °C) anaerobic fluidized bed reactor (AFBR) operated at a hydraulic retention time (HRT) of 20 days using synthetic carbohydrate rich wastewater. Anox Kaldness-K1 carriers were used as biofilm carrier material. The reactor performance and biofilm formation were evaluated during the process. The start-up process at lower liquid recirculation flow rate enhanced the biofilm formation and reactor performance. The organic substrate composition had a major impact on early colonization of methanogenic archaea onto the surface of the Kaldness carriers during the start-up process. Specific organic substrates favouring the growth of methanogenic archaea, such as acetate, are preferred in order to facilitate the subsequent biofilm formation and AFBR start-up. The supply of 'bio-available' nutrients and trace elements, in particular iron, had an important role on optimal methanogenic activity and speeding-up of the biofilm development on the Kaldness carriers. This paper provides possible strategies to optimize the various operational parameters that influence the initial biofilm formation and development in an AFBR and similar high rate anaerobic reactors, hence can be used to reduce the long time required for process start-up. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development and Processing Improvement of Aerospace Aluminum Alloys

NASA Technical Reports Server (NTRS)

Lisagor, W. Barry; Bales, Thomas T.

2007-01-01

This final report, in multiple presentation format, describes a comprehensive multi-tasked contract study to improve the overall property response of selected aerospace alloys, explore further a newly-developed and registered alloy, and correlate the processing, metallurgical structure, and subsequent properties achieved with particular emphasis on the crystallographic orientation texture developed. Modifications to plate processing, specifically hot rolling practices, were evaluated for Al-Li alloys 2195 and 2297, for the recently registered Al-Cu-Ag alloy, 2139, and for the Al-Zn-Mg-Cu alloy, 7050. For all of the alloys evaluated, the processing modifications resulted in significant improvements in mechanical properties. Analyses also resulted in an enhanced understanding of the correlation of processing, crystallographic texture, and mechanical properties.

Evaluation of the infection process by Lecanicillium fungicola in Agaricus bisporus by scanning electron microscopy.

PubMed

Santana Nunes, Janaira; Rocha de Brito, Manuela; Cunha Zied, Diego; Aparecida das Graças Leite, Eloisa; Souza Dias, Eustáquio; Alves, Eduardo

Lecanicillium fungicola causes dry bubble disease in Agaricus bisporus mushrooms leading to significant economic losses in commercial production. To monitor the infection process of L. fungicola in Brazilian strains of A. bisporus. The interaction between the mycelium of L. fungicola (LF.1) and three strains of A. bisporus (ABI 7, ABI 11/14 and ABI 11/21) was studied. Electron microscopy and X-ray microanalyses of vegetative growth and basidiocarp infection were evaluated. Micrographs show that the vegetative mycelium of the Brazilian strains of A. bisporus is not infected by the parasite. The images show that the pathogen can interlace the hyphae of A. bisporus without causing damage, which contributes to the presence of L. fungicola during the substrate colonization, allowing their presence during primordial formation of A. bisporus. In the basidiocarp, germ tubes form within 16h of infection with L. fungicola and the beginning of penetration takes place within 18h, both without the formation of specialized structures. Scanning electron microscopy enabled the process of colonization and reproduction to be observed within the formation of phialides, conidiophores and verticils of L. fungicola. The formation of calcium oxalate crystals by the pathogen was also visible using the X-ray microanalysis, both at the hyphae in the Petri plate and at basidiocarp infection site. Copyright © 2016 Asociación Española de Micología. Publicado por Elsevier España, S.L.U. All rights reserved.

Linking automatic evaluation to mood and information processing style: consequences for experienced affect, impression formation, and stereotyping.

PubMed

Chartrand, Tanya L; van Baaren, Rick B; Bargh, John A

2006-02-01

According to the feelings-as-information account, a person's mood state signals to him or her the valence of the current environment (N. Schwarz & G. Clore, 1983). However, the ways in which the environment automatically influences mood in the first place remain to be explored. The authors propose that one mechanism by which the environment influences affect is automatic evaluation, the nonconscious evaluation of environmental stimuli as good or bad. A first experiment demonstrated that repeated brief exposure to positive or negative stimuli (which leads to automatic evaluation) induces a corresponding mood in participants. In 3 additional studies, the authors showed that automatic evaluation affects information processing style. Experiment 4 showed that participants' mood mediates the effect of valenced brief primes on information processing. ((c) 2006 APA, all rights reserved).

Linking Automatic Evaluation to Mood and Information Processing Style: Consequences for Experienced Affect, Impression Formation, and Stereotyping

PubMed Central

Chartrand, Tanya L.; van Baaren, Rick B.; Bargh, John A.

2009-01-01

According to the feelings-as-information account, a person’s mood state signals to him or her the valence of the current environment (N. Schwarz & G. Clore, 1983). However, the ways in which the environment automatically influences mood in the first place remain to be explored. The authors propose that one mechanism by which the environment influences affect is automatic evaluation, the nonconscious evaluation of environmental stimuli as good or bad. A first experiment demonstrated that repeated brief exposure to positive or negative stimuli (which leads to automatic evaluation) induces a corresponding mood in participants. In 3 additional studies, the authors showed that automatic evaluation affects information processing style. Experiment 4 showed that participants’ mood mediates the effect of valenced brief primes on information processing. PMID:16478316

Satellite-aided evaluation of population exposure to air pollution

NASA Technical Reports Server (NTRS)

Todd, W. J.; George, A. J., Jr.; Bryant, N. A.

1979-01-01

The evaluation of population exposure to air pollution through the computer processing of Landsat digital land use data, along with total suspended particulate estimates and population data by census tracts, is demonstrated. Digital image processing was employed to analyze simultaneously data from Landsat MSS bands 4 through 7 in order to extract land use and land cover information. The three data sets were spatially registered in a digital format, compatible with integrated computer processing, and cross-tabulated. A map illustrating relative air quality by 2-sq km cells for the residential population in the Portland, Oregon area is obtained.

RADIANCE PROCESS EVALUATION FOR PARTICLE REMOVAL

EPA Science Inventory

The microelectronics industry (wafer, flat panel displays, photomasks, and storage media) is transitioning to higher device densities and larger substrate formats. These changes will challenge standard cleaning methods and will require significant increases to the fabricator inf...

Production and testing of the ENEA-Bologna VITJEFF32.BOLIB (JEFF-3.2) multi-group (199 n + 42 γ) cross section library in AMPX format for nuclear fission applications

NASA Astrophysics Data System (ADS)

Pescarini, Massimo; Orsi, Roberto; Frisoni, Manuela

2017-09-01

The ENEA-Bologna Nuclear Data Group produced the VITJEFF32.BOLIB multi-group coupled neutron/photon (199 n + 42 γ) cross section library in AMPX format, based on the OECD-NEA Data Bank JEFF-3.2 evaluated nuclear data library. VITJEFF32.BOLIB was conceived for nuclear fission applications as European counterpart of the ORNL VITAMIN-B7 similar library (ENDF/B-VII.0 data). VITJEFF32.BOLIB has the same neutron and photon energy group structure as the former ORNL VITAMIN-B6 reference library (ENDF/B-VI.3 data) and was produced using similar data processing methodologies, based on the LANL NJOY-2012.53 nuclear data processing system for the generation of the nuclide cross section data files in GENDF format. Then the ENEA-Bologna 2007 Revision of the ORNL SCAMPI nuclear data processing system was used for the conversion into the AMPX format. VITJEFF32.BOLIB contains processed cross section data files for 190 nuclides, obtained through the Bondarenko (f-factor) method for the treatment of neutron resonance self-shielding and temperature effects. Collapsed working libraries of self-shielded cross sections in FIDO-ANISN format, used by the deterministic transport codes of the ORNL DOORS system, can be generated from VITJEFF32.BOLIB through the cited SCAMPI version. This paper describes the methodology and specifications of the data processing performed and presents some results of the VITJEFF32.BOLIB validation.

A Faculty Toolkit for Formative Assessment in Pharmacy Education

PubMed Central

Alston, Greg L.; Bird, Eleanora; Buring, Shauna M.; Kelley, Katherine A.; Murphy, Nanci L.; Schlesselman, Lauren S.; Stowe, Cindy D.; Szilagyi, Julianna E.

2014-01-01

This paper aims to increase understanding and appreciation of formative assessment and its role in improving student outcomes and the instructional process, while educating faculty on formative techniques readily adaptable to various educational settings. Included are a definition of formative assessment and the distinction between formative and summative assessment. Various formative assessment strategies to evaluate student learning in classroom, laboratory, experiential, and interprofessional education settings are discussed. The role of reflective writing and portfolios, as well as the role of technology in formative assessment, are described. The paper also offers advice for formative assessment of faculty teaching. In conclusion, the authors emphasize the importance of creating a culture of assessment that embraces the concept of 360-degree assessment in both the development of a student’s ability to demonstrate achievement of educational outcomes and a faculty member’s ability to become an effective educator. PMID:26056399

Policy Makers' Perceptions on the Use of Evidence from Evaluations

ERIC Educational Resources Information Center

Cameron, Ailsa; Salisbury, Chris; Lart, Rachel; Stewart, Kate; Peckham, Stephen; Calnan, Michael; Purdy, Sarah; Thorp, Helen

2011-01-01

Using data from the Department of Health funded study "Making the most of policy evaluations", this paper explores the views of those working within the policy process about the role of evidence. It highlights a tension between formative and summative uses of research, which appeared to be exacerbated by a lack of clarity surrounding the…

Evaluation of the Program Effectiveness of Research Competence Development in Prospective Elementary School Teachers

ERIC Educational Resources Information Center

Khan, Natalya N.; Kolumbayeva, Sholpan Zh.; Karsybayeva, Raissa K.; Nabuova, Roza A.; Kurmanbekova, Manshuk B.; Syzdykbayeva, Aigul Dzh.

2016-01-01

To develop research competence in prospective teachers, a system of methods for diagnostics and formation of this competence in prospective elementary school teachers in the training process is designed. To diagnose the research competence, a series of techniques were used that allow subtle evaluation of each competence research component:…

Creating and Evaluating a Hypertext System of Documenting Analytical Test Methods in a Chemical Plant Quality Assurance Laboratory.

ERIC Educational Resources Information Center

White, Charles E., Jr.

The purpose of this study was to develop and implement a hypertext documentation system in an industrial laboratory and to evaluate its usefulness by participative observation and a questionnaire. Existing word-processing test method documentation was converted directly into a hypertext format or "hyperdocument." The hyperdocument was designed and…

Evidence Evaluation: Measure "Z" Corresponds to Human Utility Judgments Better than Measure "L" and Optimal-Experimental-Design Models

ERIC Educational Resources Information Center

Rusconi, Patrice; Marelli, Marco; D'Addario, Marco; Russo, Selena; Cherubini, Paolo

2014-01-01

Evidence evaluation is a crucial process in many human activities, spanning from medical diagnosis to impression formation. The present experiments investigated which, if any, normative model best conforms to people's intuition about the value of the obtained evidence. Psychologists, epistemologists, and philosophers of science have proposed…

Process evaluation in a multisite, primary obesity-prevention trial in American Indian schoolchildren.

PubMed

Helitzer, D L; Davis, S M; Gittelsohn, J; Going, S B; Murray, D M; Snyder, P; Steckler, A B

1999-04-01

We describe the development, implementation, and use of the process evaluation component of a multisite, primary obesity prevention trial for American Indian schoolchildren. We describe the development and pilot testing of the instruments, provide some examples of the criteria for instrument selection, and provide examples of how process evaluation results were used to document and refine intervention components. The theoretical and applied framework of the process evaluation was based on diffusion theory, social learning theory, and the desire for triangulation of multiple modes of data collection. The primary objectives of the process evaluation were to systematically document the training process, content, and implementation of 4 components of the intervention. The process evaluation was developed and implemented collaboratively so that it met the needs of both the evaluators and those who would be implementing the intervention components. Process evaluation results revealed that observation and structured interviews provided the most informative data; however, these methods were the most expensive and time consuming and required the highest level of skill to undertake. Although the literature is full of idealism regarding the uses of process evaluation for formative and summative purposes, in reality, many persons are sensitive to having their work evaluated in such an in-depth, context-based manner as is described. For this reason, use of structured, quantitative, highly objective tools may be more effective than qualitative methods, which appear to be more dependent on the skills and biases of the researcher and the context in which they are used.

Mechanisms and processes of stratal disruption and mixing in the development of mélanges and broken formations: Redefining and classifying mélanges

NASA Astrophysics Data System (ADS)

Festa, A.; Dilek, Y.; Pini, G. A.; Codegone, G.; Ogata, K.

2012-09-01

The terms mélange and broken formation have been used in different ways in the literature. The lack of agreement on their definition often leads to confusion and misinterpretations. An evaluation of the various uses of these terms allows us to consider several types of chaotic rock bodies originated by tectonic, sedimentary and diapiric processes in different tectonic settings. Our review of stratal disruption and mixing processes shows that there exists a continuum of deformation structures and processes in the generation of mélanges and broken formations. This continuum is directly controlled by the increase of the degree of consolidation with burial. In tectonically active environments, at the shallow structural levels, the occurrence of poorly consolidated sediments favors gravitational deformation. At deeper structural levels, the deformation related to tectonic forces becomes gradually more significant with depth. Sedimentary (and diapiric) mélanges and broken formations represent the products of punctuated stratal disruption mechanisms recording the instantaneous physical conditions in the geological environment at the time of their formation. The different kinematics, the composition and lithification degree of sediments, the geometry and morphology of the basins, and the mode of failure propagation control the transition between different types of mass-transported chaotic bodies, the style of stratal disruption, and the amount of rock mixing. Tectonically broken formations and mélanges record a continuum of deformation that occurs through time and different degrees of lithification during a progressive increase of the degree of consolidation and of the diagenetic and metamorphic mineral transformation. Systematic documentation of the mechanisms and processes of the formation of different broken formations and mélanges and their interplay in time and space are highly important to increase the understanding of the evolutionary history of accretionary wedges and orogenic belts.

Audiovisual Presentations on a Handheld PC are Preferred As an Educational Tool by NICU Parents.

PubMed

Alur, P; Cirelli, J; Goodstein, M; Bell, T; Liss, J

2010-01-01

Health literacy is critical for understanding complex medical problems and necessary for the well being of the patient. Printed educational materials (PM) have limitations in explaining the dynamics of a disease process. Multimedia formats may be useful for enhancing the educational process. To evaluate whether a printed format or animation with commentary on a handheld personal computer (PC) is preferred as an educational tool by parents of a baby in the NICU. PARENTS EVALUATED TWO FORMATS: A 1-page illustrated document from the American Heart Association explaining patent ductus arteriosus (PDA) and animation with commentary on a handheld PC that explained the physiology of PDA in 1 minute. The reading grade level of the PM was 8.6 versus 18.6 for the audio portion of the animated presentation. Parents viewed each format and completed a four-item questionnaire. Parents rated both formats and indicated their preference as printed, animation, or both. Forty-six parents participated in the survey. Parents preferred animation over PM (50% vs. 17.4%. p = 0.02); 39.1% expressed that the animation was excellent; whereas 4.3% expressed that the PM was excellent (p<0.001). The order of presentation of formats, sex, age, and educational level of parents did not influence the method preferred (p>0.05). Parents preferred animation on a small screen handheld PC despite a much higher language level. Because handheld PCs are portable and inexpensive, they can be used effectively at the bedside with low-cost animation to enhance understanding of complex disease conditions.

Audiovisual Presentations on a Handheld PC are Preferred As an Educational Tool by NICU Parents

PubMed Central

Alur, P.; Cirelli, J.; Goodstein, M.; Bell, T.; Liss, J.

2010-01-01

Background Health literacy is critical for understanding complex medical problems and necessary for the well being of the patient. Printed educational materials (PM) have limitations in explaining the dynamics of a disease process. Multimedia formats may be useful for enhancing the educational process. Objective To evaluate whether a printed format or animation with commentary on a handheld personal computer (PC) is preferred as an educational tool by parents of a baby in the NICU. Methods Parents evaluated two formats: A 1-page illustrated document from the American Heart Association explaining patent ductus arteriosus (PDA) and animation with commentary on a handheld PC that explained the physiology of PDA in 1 minute. The reading grade level of the PM was 8.6 versus 18.6 for the audio portion of the animated presentation. Parents viewed each format and completed a four-item questionnaire. Parents rated both formats and indicated their preference as printed, animation, or both. Results Forty-six parents participated in the survey. Parents preferred animation over PM (50% vs. 17.4%. p = 0.02); 39.1% expressed that the animation was excellent; whereas 4.3% expressed that the PM was excellent (p<0.001). The order of presentation of formats, sex, age, and educational level of parents did not influence the method preferred (p>0.05). Conclusion Parents preferred animation on a small screen handheld PC despite a much higher language level. Because handheld PCs are portable and inexpensive, they can be used effectively at the bedside with low-cost animation to enhance understanding of complex disease conditions. PMID:23616833

Fostering professional formation in residency: development and evaluation of the "forum" seminar series.

PubMed

Nothnagle, Melissa; Reis, Shmuel; Goldman, Roberta E; Anandarajah, Gowri

2014-01-01

Residency training is a critical time for physicians' professional formation. However, few structured interventions exist to support residents in this transformative process of integrating personal and professional values, a process that is essential to physician identity formation and preservation of core values such as service and compassion. The authors created a seminar series, the "Forum," to support resident professional formation and address the hidden curriculum as part of a larger intervention to support self-directed learning skills such as goal setting and reflection. Ninety-minute sessions with senior residents and faculty held every other month include opportunities for individual reflection, small- and large-group discussion, and brief didactic components focused on skills such as teaching and leadership. The qualitative program evaluation included analyses of individual semistructured interviews with resident and faculty participants from 2008 to 2011 and of notes recorded by an observer during the 1st year's sessions. Residents appreciated the focus on relevant issues, presence of faculty, opportunities for reflection and interactivity, and inclusion of practical skills. Effects attributed to the Forum included gaining practical skills, feeling a deeper connection to one another and a sense of community, and recognizing progress in their own professional development and growth. Elements described in the literature as essential to professional formation, including encouraging reflection, use of narrative, role modeling, addressing the hidden curriculum, and fostering an authentic community, were recognized by participants as integral to the Forum's success. A group forum for reflection and discussion with peers and role models, tailored to local needs, offers an effective structure to foster professional formation in residency.

Emerging Themes and Lessons Learned: The First Year of Smart Start.

ERIC Educational Resources Information Center

Maxwell, Kelly; Bryant, Donna; Adkins, Amee; McCadden, Brian; Noblit, George

Smart Start is North Carolina's partnership between state government and local leaders, service providers, and families to better serve children under 6 years of age and their families. A formative evaluation of the Smart Start process, to inform the current state-level decision-making processes for future Smart Start efforts, was devised from a…

The Role of Emotional Intelligence Skills in Teaching Excellence: The Validation of a Behavioral Skills Checklist

ERIC Educational Resources Information Center

Harville, Pamela Cherie

2012-01-01

The role of emotional intelligence in effective teaching can be developed and enhanced through the use of an assessment instrument as a new evaluation and learning process for teachers. This involves a formative learning process for the qualities associated with excellent teaching characteristics and behaviors for use with teacher evaluation…

Introduction to computer image processing

NASA Technical Reports Server (NTRS)

Moik, J. G.

1973-01-01

Theoretical backgrounds and digital techniques for a class of image processing problems are presented. Image formation in the context of linear system theory, image evaluation, noise characteristics, mathematical operations on image and their implementation are discussed. Various techniques for image restoration and image enhancement are presented. Methods for object extraction and the problem of pictorial pattern recognition and classification are discussed.

An Evaluation of the Functionality of Advanced Fuel Research Prototype Dry Pyrolyzer for Destruction of Solid Wastes

NASA Technical Reports Server (NTRS)

Fisher, John; Wignarajah, K.; Howard, Kevin; Serio, Mike; Kroo, Eric

2004-01-01

The prototype dry pyrolyser delivered to Ames Research Center is the end-product of a Phase I1 Small Business Initiative Research (SBIR) project. Some of the major advantages of pyrolysis for processing solid wastes are that it can process solid wastes, it permits elemental recycling while conserving oxygen use, and it can function as a pretreatment for combustion processes. One of the disadvantages of pyrolysis is the formation of tars. By controlling the rate of heating, tar formation can be minimized. This paper presents data on the pyrolysis of various space station wastes. The performance of the pyrolyser is also discussed and appropriate modifications suggested to improve the performance of the dry pyrolyzer.

Distinguishing Long-Term Controls on Fluvial Architecture in the Lance Formation, Bighorn Basin, Wyoming

NASA Astrophysics Data System (ADS)

McHarge, J. L.; Hajek, E. A.; Heller, P. L.

2007-12-01

Allogenic processes are considered a prime control on the stratigraphic distribution of channel bodies, however, recent studies have indicated that autogenic stratigraphic organization may occur within fluvial systems on basin- filling time scales (105-106 years). Groupings or clusters of closely-spaced channel bodies can be produced by several different mechanisms, including both allogenic and autogenic processes. Commonly, sand- dominated intervals in stratigraphic successions are interpreted as incised-valley fills produced by base-level changes. In contrast, long-timescale organization of river avulsion can generate similar stratigraphic patterns. For example, sand-dominated intervals in the fluvial Lance Formation (Maastrichtian; Bighorn Basin, WY) have been interpreted as incised-valley fills formed during sea-level lowstand. However, closely-spaced sand bodies in the Ferris Formation (Lance equivalent; Hanna Basin, WY) are interpreted as aggradational in origin, and have been compared to autogenic avulsion stratigraphy produced in experimental basins. We evaluate the Lance Formation in the southern Bighorn Basin in an effort to determine whether these sand-dominated intervals are truly incised- valley fills resulting from sea-level changes, or if they were generated by autogenic processes. The Lance Formation crops out in the western and southern margins of the basin, exposing relatively proximal and distal portions of the system. By comparing alluvial architecture between exposures, we evaluate similarities and differences from upstream to downstream and look for evidence of intrinsic and extrinsic controls on deposition. In both localities, the Lance Formation comprises multi-story sheet sandstones and smaller, single-story sandstones. Observed changes from upstream to downstream in the system include: 1) increasing paleoflow depths (from ~30-60 cm to ~70-120 cm); 2) decreasing preservation of fine-grained material within channel bodies; 3) increasing proportion of amalgamated, multi-story sand bodies; and 4) increasing lateral continuity of multi-story sand bodies. These results indicate that upstream, channel-body spacing is dominantly controlled by aggradational processes and may be the result of autogenic avulsion clustering, whereas downstream, evidence of incision and amalgamation indicate that base-level may have limited and controlled sand-body architecture.

The Evaluation of the Possibilities of Using PLGA Co-Polymer and Its Composites with Carbon Fibers or Hydroxyapatite in the Bone Tissue Regeneration Process – in Vitro and in Vivo Examinations

PubMed Central

Cieślik, Magdalena; Mertas, Anna; Morawska-Chochólł, Anna; Sabat, Daniel; Orlicki, Rajmund; Owczarek, Aleksander; Król, Wojciech; Cieślik, Tadeusz

2009-01-01

Synthetic polymers belonging to the aliphatic polyester group have become highly promising biomaterials for reconstructive medicine. The purpose of the present work is a biological evaluation of lactide-glycolide co-polymer (PLGA) and its composites with carbon fibers (PLGA+CF) or hydroxyapatite (PLGA+HA). The cytotoxicity of the evaluated materials towards hFOB 1.19 human osteoblast-like cells was assessed. Moreover, during the one-year contact of the assessed materials with living osseous tissue, the progress of bone formation was analyzed and the accompanying process of the materials’ degradation was evaluated. The materials under evaluation proved to be biocompatible. PMID:19742134

Incorporation of Blended Learning in Introductory Courses: A Research-Based Approach to Evaluation

NASA Astrophysics Data System (ADS)

Strey, S. T.; Charlevoix, D. J.; Guarente, B. A.; Snodgrass, E. R.

2008-12-01

We evaluate the learning outcomes of students in large enrollment classes comparing a blended learning course format and a traditional lecture section. Blended learning, here, describes instruction that is a combination of face-to-face meeting with asynchronous online learning, resulting in reduced class time. The course, Severe and Hazardous Weather, relies heavily on graphics and animations of weather events available online, both current and archived, and thereby lends itself well to a blended format. Severe and Hazardous Weather is a popular general education requirement course at the University of Illinois with consistently high enrollments (greater than 200 students per section) and classes at capacity. Unlike many past studies, this blended learning format is applied to a large-enrollment course of approximately 100 students. Curriculum was redesigned during fall 2007 from typical lecture to the blended format. The redesign process followed best practices grounded in peer-reviewed literature on blended and online learning. We will provide a brief overview of the course structure, but focus on the evaluation of both the curriculum design and student outcomes as compared to the traditional lecture-based course. Evaluation is based on course objectives stated in the course syllabus and is conducted following best practices; the research project received University Institutional Review Board approval prior to the start of the study.

Descriptive and evaluative judgment processes: behavioral and electrophysiological indices of processing symmetry and aesthetics.

PubMed

Jacobsen, Thomas; Höfel, Lea

2003-12-01

Descriptive symmetry and evaluative aesthetic judgment processes were compared using identical stimuli in both judgment tasks. Electrophysiological activity was recorded while participants judged novel formal graphic patterns in a trial-by-trial cuing setting using binary responses (symmetric, not symmetric; beautiful, not beautiful). Judgment analyses of a Phase 1 test and main experiment performance resulted in individual models, as well as group models, of the participants' judgment systems. Symmetry showed a strong positive correlation with beautiful judgments and was the most important cue. Descriptive judgments were performed faster than evaluative judgments. The ERPs revealed a phasic, early frontal negativity for the not-beautiful judgments. A sustained posterior negativity was observed in the symmetric condition. All conditions showed late positive potentials (LPPs). Evaluative judgment LPPs revealed a more pronounced right lateralization. It is argued that the present aesthetic judgments engage a two-stage process consisting of early, anterior frontomedian impression formation after 300 msec and right-hemisphere evaluative categorization around 600 msec after onset of the graphic patterns.

Affective and cognitive factors influencing sensitivity to probabilistic information.

PubMed

Tyszka, Tadeusz; Sawicki, Przemyslaw

2011-11-01

In study 1 different groups of female students were randomly assigned to one of four probabilistic information formats. Five different levels of probability of a genetic disease in an unborn child were presented to participants (within-subject factor). After the presentation of the probability level, participants were requested to indicate the acceptable level of pain they would tolerate to avoid the disease (in their unborn child), their subjective evaluation of the disease risk, and their subjective evaluation of being worried by this risk. The results of study 1 confirmed the hypothesis that an experience-based probability format decreases the subjective sense of worry about the disease, thus, presumably, weakening the tendency to overrate the probability of rare events. Study 2 showed that for the emotionally laden stimuli, the experience-based probability format resulted in higher sensitivity to probability variations than other formats of probabilistic information. These advantages of the experience-based probability format are interpreted in terms of two systems of information processing: the rational deliberative versus the affective experiential and the principle of stimulus-response compatibility. © 2011 Society for Risk Analysis.

Losartan and captopril treatment rescue normal thrombus formation in microfibril associated glycoprotein-1 (MAGP1) deficient mice.

PubMed

Vassequi-Silva, Tallita; Pereira, Danielle Sousa; Nery Diez, Ana Cláudia C; Braga, Guilherme G; Godoy, Juliana A; Mendes, Camila B; Dos Santos, Leonardo; Krieger, José E; Antunes, Edson; Costa, Fábio T M; Vicente, Cristina P; Werneck, Claudio C

2016-02-01

MAGP1 is a glycoprotein present in the elastic fibers and is a part of the microfibrils components. MAGP1 interacts with von Willebrand factor and the active form of TGF-β and BMP. In mice lacking MAGP1, thrombus formation is delayed, increasing the occlusion time of carotid artery despite presenting normal blood coagulation in vitro. MAGP1-containing microfibrils may play a role in hemostasis and thrombosis. In this work, we evaluated the function of MAGP1 and its relation to TGF-β in the arterial thrombosis process. We analyzed thrombus formation time in wild type and MAGP1-deficient mice comparing Rose Bengal and Ferric Chloride induced arterial lesion. The potential participation of TGF-β in this process was accessed when we treated both wild type and MAGP1-deficient mice with losartan (an antihypertensive drug that decreases TGF-β activity) or captopril (an angiotensin converting enzyme inhibitor that was used as a control antihypertensive drug). Besides, we evaluated thrombus embolization and the gelatinolytic activity in the arterial walls in vitro and ex vivo. Losartan and captopril were able to recover the thrombus formation time without changing blood pressure, activated partial thromboplastin time (aPTT), PT (prothrombin time), platelet aggregation and adhesion, but decreased gelatinase activity. Our results suggest that both treatments are effective in the prevention of the sub-endothelial ECM degradation, allowing the recovery of normal thrombus formation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Control of aliphatic halogenated DBP precursors with multiple drinking water treatment processes: Formation potential and integrated toxicity.

PubMed

Zhang, Yimeng; Chu, Wenhai; Yao, Dechang; Yin, Daqiang

2017-08-01

The comprehensive control efficiency for the formation potentials (FPs) of a range of regulated and unregulated halogenated disinfection by-products (DBPs) (including carbonaceous DBPs (C-DBPs), nitrogenous DBPs (N-DBPs), and iodinated DBPs (I-DBPs)) with the multiple drinking water treatment processes, including pre-ozonation, conventional treatment (coagulation-sedimentation, pre-sand filtration), ozone-biological activated carbon (O 3 -BAC) advanced treatment, and post-sand filtration, was investigated. The potential toxic risks of DBPs by combing their FPs and toxicity values were also evaluated. The results showed that the multiple drinking water treatment processes had superior performance in removing organic/inorganic precursors and reducing the formation of a range of halogenated DBPs. Therein, ozonation significantly removed bromide and iodide, and thus reduced the formation of brominated and iodinated DBPs. The removal of organic carbon and nitrogen precursors by the conventional treatment processes was substantially improved by O 3 -BAC advanced treatment, and thus prevented the formation of chlorinated C-DBPs and N-DBPs. However, BAC filtration leads to the increased formation of brominated C-DBPs and N-DBPs due to the increase of bromide/DOC and bromide/DON. After the whole multiple treatment processes, the rank order for integrated toxic risk values caused by these halogenated DBPs was haloacetonitriles (HANs)≫haloacetamides (HAMs)>haloacetic acids (HAAs)>trihalomethanes (THMs)>halonitromethanes (HNMs)≫I-DBPs (I-HAMs and I-THMs). I-DBPs failed to cause high integrated toxic risk because of their very low FPs. The significant higher integrated toxic risk value caused by HANs than other halogenated DBPs cannot be ignored. Copyright © 2017. Published by Elsevier B.V.

Command Center Library Model Document. Comprehensive Approach to Reusable Defense Software (CARDS)

DTIC Science & Technology

1992-05-31

system, and functionality for specifying the layout of the document. 3.7.16.1 FrameMaker FrameMaker is a Commercial Off The Shelf (COTS) component...facilitating WYSIWYG creation of formatted reports with embedded graphics. FrameMaker is an advanced publishing tool that integrates word processing...available for the component FrameMaker : * Product evaluation reports in ASCII and postscript formats • Product assessment on line in model 0 Product

Analysis and evaluation of process and equipment in tasks 2 and 4 of the Low Cost Solar Array project

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1978-01-01

Several experimental and projected Czochralski crystal growing process methods were studied and compared to available operations and cost-data of recent production Cz-pulling, in order to elucidate the role of the dominant cost contributing factors. From this analysis, it becomes apparent that substantial cost reductions can be realized from technical advancements which fall into four categories: an increase in furnace productivity; the reduction of crucible cost through use of the crucible for the equivalent of multiple state-of-the-art crystals; the combined effect of several smaller technical improvements; and a carry over effect of the expected availability of semiconductor grade polysilicon at greatly reduced prices. A format for techno-economic analysis of solar cell production processes was developed, called the University of Pennsylvania Process Characterization (UPPC) format. The accumulated Cz process data are presented.

A Probabilistic Software System Attribute Acceptance Paradigm for COTS Software Evaluation

NASA Technical Reports Server (NTRS)

Morris, A. Terry

2005-01-01

Standard software requirement formats are written from top-down perspectives only, that is, from an ideal notion of a client s needs. Despite the exactness of the standard format, software and system errors in designed systems have abounded. Bad and inadequate requirements have resulted in cost overruns, schedule slips and lost profitability. Commercial off-the-shelf (COTS) software components are even more troublesome than designed systems because they are often provided as is and subsequently delivered with unsubstantiated validation of described capabilities. For COTS software, there needs to be a way to express the client s software needs in a consistent and formal manner using software system attributes derived from software quality standards. Additionally, the format needs to be amenable to software evaluation processes that integrate observable evidence garnered from historical data. This paper presents a paradigm that effectively bridges the gap between what a client desires (top-down) and what has been demonstrated (bottom-up) for COTS software evaluation. The paradigm addresses the specification of needs before the software evaluation is performed and can be used to increase the shared understanding between clients and software evaluators about what is required and what is technically possible.

Integration of e-learning technologies in an interprofessional health science course.

PubMed

Carbonaro, Mike; King, Sharla; Taylor, Elizabeth; Satzinger, Franziska; Snart, Fern; Drummond, Jane

2008-02-01

Advances in information and communication technology are influencing instructional formats and delivery modes for post secondary teaching and learning. The purpose of this study was to determine whether interprofessional team process skills traditionally taught in a small group face-to-face classroom setting could be taught in a blended learning environment; without compromising the pedagogical approach and collaborative Group Investigation Model (Sharan & Sharan 1992) used in the course. A required interprofessional team development course designed to teach health science students (Medicine, Nursing, Pharmacy, Occupational Therapy, Physical Therapy, Dentistry, Dental Hygiene, Medical Laboratory Science, and Nutrition) team process skills was redesigned from a 100% face-to-face delivery format to a blended learning format where 70% of the instruction was delivered using a new synchronous virtual classroom technology (Elluminate www.elluminate.com) in conjunction with asynchronous technology (WebCT). It was hypothesized there would be no significant difference between the blended learning format and the traditional face-to-face format in the development of interprofessional team knowledge, skills and attitudes. The two formats were evaluated on demographic information, computer experience, and interprofessional team attitudes, knowledge and skills. The three main findings are: (a) no significant differences between student groups on achieving team process skills, (b) an observation of differences between the groups on team dynamics, and (c) a more positive achievement of course learning objectives perceived by students in the blended learning class. The results provide evidence to support our blended learning format without compromising pedagogy. They also suggest that this format enhances students' perceptions of their learning.

Automated software system for checking the structure and format of ACM SIG documents

NASA Astrophysics Data System (ADS)

Mirza, Arsalan Rahman; Sah, Melike

2017-04-01

Microsoft (MS) Office Word is one of the most commonly used software tools for creating documents. MS Word 2007 and above uses XML to represent the structure of MS Word documents. Metadata about the documents are automatically created using Office Open XML (OOXML) syntax. We develop a new framework, which is called ADFCS (Automated Document Format Checking System) that takes the advantage of the OOXML metadata, in order to extract semantic information from MS Office Word documents. In particular, we develop a new ontology for Association for Computing Machinery (ACM) Special Interested Group (SIG) documents for representing the structure and format of these documents by using OWL (Web Ontology Language). Then, the metadata is extracted automatically in RDF (Resource Description Framework) according to this ontology using the developed software. Finally, we generate extensive rules in order to infer whether the documents are formatted according to ACM SIG standards. This paper, introduces ACM SIG ontology, metadata extraction process, inference engine, ADFCS online user interface, system evaluation and user study evaluations.

The indication of Martian gully formation processes by slope-area analysis

USGS Publications Warehouse

Conway, S.J.; Balme, M.R.; Murray, J.B.; Towner, M.C.; Okubo, C.H.; Grindrod, P.M.

2011-01-01

The formation process of recent gullies on Mars is currently under debate. This study aims to discriminate between the proposed formation processes - pure water flow, debris flow and dry mass wasting - through the application of geomorphological indices commonly used in terrestrial geomorphology. High-resolution digital elevation models (DEMs) of Earth and Mars were used to evaluate the drainage characteristics of small slope sections. Data from Earth were used to validate the hillslope, debris-flow and alluvial process domains previously found for large fluvial catchments on Earth, and these domains were applied to gullied and ungullied slopes on Mars. In accordance with other studies, our results indicate that debris flow is one of the main processes forming the Martian gullies that were being examined. The source of the water is predominantly distributed surface melting, not an underground aquifer. Evidence is also presented indicating that other processes may have shaped Martian crater slopes, such as ice-assisted creep and solifluction, in agreement with the proposed recent Martian glacial and periglacial climate. Our results suggest that, within impact craters, different processes are acting on differently oriented slopes, but further work is needed to investigate the potential link between these observations and changes in Martian climate. ?? The Geological Society of London 2011.

Real-time slicing algorithm for Stereolithography (STL) CAD model applied in additive manufacturing industry

NASA Astrophysics Data System (ADS)

Adnan, F. A.; Romlay, F. R. M.; Shafiq, M.

2018-04-01

Owing to the advent of the industrial revolution 4.0, the need for further evaluating processes applied in the additive manufacturing application particularly the computational process for slicing is non-trivial. This paper evaluates a real-time slicing algorithm for slicing an STL formatted computer-aided design (CAD). A line-plane intersection equation was applied to perform the slicing procedure at any given height. The application of this algorithm has found to provide a better computational time regardless the number of facet in the STL model. The performance of this algorithm is evaluated by comparing the results of the computational time for different geometry.

Entrepreneurial Spirit in Strategic Planning.

ERIC Educational Resources Information Center

Riggs, Donald E.

1987-01-01

Presents a model which merges the concepts of entrepreneurship with those of strategic planning to create a library management system. Each step of the process, including needs assessment and policy formation, strategy choice and implementation, and evaluation, is described in detail. (CLB)

Evaluating the Informative Quality of Documents in SGML Format from Judgements by Means of Fuzzy Linguistic Techniques Based on Computing with Words.

ERIC Educational Resources Information Center

Herrera-Viedma, Enrique; Peis, Eduardo

2003-01-01

Presents a fuzzy evaluation method of SGML documents based on computing with words. Topics include filtering the amount of information available on the Web to assist users in their search processes; document type definitions; linguistic modeling; user-system interaction; and use with XML and other markup languages. (Author/LRW)

National Home Start Evaluation Interim Report VII. Twenty-Month Program Analysis and Findings.

ERIC Educational Resources Information Center

Love, John M.; And Others

This interim evaluation report focuses on process (formative) and outcome (summative) data collected in spring 1975 on the National Home Start Program. Home Start, a federally-funded 3-year (1972-1975) home-based demonstration program for low-income families with 3- to 5-year-old children was designed to enhance a mother's skills in dealing with…

Stormwater filtration of toxic heavy metal ions using lignocellulosic materials selection process, fiberization, chemical modification, and mat formation

Treesearch

James S. Han

1999-01-01

Lignocellulosic materials were evaluated for their effectiveness in filtering toxic heavy metals from stormwater. Kenaf, alfalfa, juniper, and aspen fibers were used as models to evaluate the effectiveness and limitations of chemical modification and the extent of fiber degradation. Individual and mixed aqueous solutions of nickel, copper, zinc, and cadmium in various...

NHS Blood Tracking Pilot: City University Evaluation Project

NASA Astrophysics Data System (ADS)

Goddard, Kate; Shabestari, Omid; Adriano, Juan; Kay, Jonathan; Roudsari, Abdul

Automation of healthcare processes is an emergent theme in the drive to increase patient safety. The Mayday Hospital has been chosen as the pilot site for the implementation of the Electronic Clinical Transfusion Management System to track blood from the point of ordering to the final transfusion. The Centre for Health Informatics at City University is carrying out an independent evaluation of the system implementation using a variety of methodologies to both formatively inform the implementation process and summatively provide an account of the lessons learned for future implementations.

Evaluating 3D bone tissue engineered constructs with different seeding densities using the alamarBlue assay and the effect on in vivo bone formation.

PubMed

Wilson, C E; Dhert, W J A; Van Blitterswijk, C A; Verbout, A J; De Bruijn, J D

2002-12-01

Bone tissue engineering using patient derived cells seeded onto porous scaffolds has gained much attention in recent years. Evaluating the viability of these 3D constructs is an essential step in optimizing the process. The alamarBlue (aB) assay was evaluated for its potential to follow in vitro cell proliferation on architecturally standardized hydroxyapatite scaffolds. The impact of the aB assayed and seeding density on subsequent in vivo bone formation was investigated. Twelve scaffolds were seeded with various densities from 250 to 2.5x10(6) cells/scaffold and assay by aB at 5 time points during the 7-day culture period. Twelve additional scaffolds were seeded with 2.5x10(5) cells/scaffold. Two control and 2 aB treated scaffolds were subcutaneously implanted into each of 6 nude mice for 6 weeks. Four observers ranked bone formation using a pair wise comparison of histological sections form each mouse. The aB assay successfully followed cell proliferation, however, the diffusion kinetics of the 3D constructs must be considered. The influence of in vitro aB treatment on subsequent in vivo bone formation cannot be ruled out but was not shown to be significant in the current study. The aB assay appears to be quite promising for evaluating a maximum or end-point viability of 3D tissue engineered constructs. Finally, higher seeding densities resulted in more observed bone formation.

Uncertainties in SOA Formation from the Photooxidation of α-pinene

NASA Astrophysics Data System (ADS)

McVay, R.; Zhang, X.; Aumont, B.; Valorso, R.; Camredon, M.; La, S.; Seinfeld, J.

2015-12-01

Explicit chemical models such as GECKO-A (the Generator for Explicit Chemistry and Kinetics of Organics in the Atmosphere) enable detailed modeling of gas-phase photooxidation and secondary organic aerosol (SOA) formation. Comparison between these explicit models and chamber experiments can provide insight into processes that are missing or unknown in these models. GECKO-A is used to model seven SOA formation experiments from α-pinene photooxidation conducted at varying seed particle concentrations with varying oxidation rates. We investigate various physical and chemical processes to evaluate the extent of agreement between the experiments and the model predictions. We examine the effect of vapor wall loss on SOA formation and how the importance of this effect changes at different oxidation rates. Proposed gas-phase autoxidation mechanisms are shown to significantly affect SOA predictions. The potential effects of particle-phase dimerization and condensed-phase photolysis are investigated. We demonstrate the extent to which SOA predictions in the α-pinene photooxidation system depend on uncertainties in the chemical mechanism.

Curcumin complexation with cyclodextrins by the autoclave process: Method development and characterization of complex formation.

PubMed

Hagbani, Turki Al; Nazzal, Sami

2017-03-30

One approach to enhance curcumin (CUR) aqueous solubility is to use cyclodextrins (CDs) to form inclusion complexes where CUR is encapsulated as a guest molecule within the internal cavity of the water-soluble CD. Several methods have been reported for the complexation of CUR with CDs. Limited information, however, is available on the use of the autoclave process (AU) in complex formation. The aims of this work were therefore to (1) investigate and evaluate the AU cycle as a complex formation method to enhance CUR solubility; (2) compare the efficacy of the AU process with the freeze-drying (FD) and evaporation (EV) processes in complex formation; and (3) confirm CUR stability by characterizing CUR:CD complexes by NMR, Raman spectroscopy, DSC, and XRD. Significant differences were found in the saturation solubility of CUR from its complexes with CD when prepared by the three complexation methods. The AU yielded a complex with expected chemical and physical fingerprints for a CUR:CD inclusion complex that maintained the chemical integrity and stability of CUR and provided the highest solubility of CUR in water. Physical and chemical characterizations of the AU complexes confirmed the encapsulated of CUR inside the CD cavity and the transformation of the crystalline CUR:CD inclusion complex to an amorphous form. It was concluded that the autoclave process with its short processing time could be used as an alternate and efficient methods for drug:CD complexation. Copyright © 2017 Elsevier B.V. All rights reserved.

Some considerations in evaluating spoken word recognition by normal-hearing, noise-masked normal-hearing, and cochlear implant listeners. I: The effects of response format.

PubMed

Sommers, M S; Kirk, K I; Pisoni, D B

1997-04-01

The purpose of the present studies was to assess the validity of using closed-set response formats to measure two cognitive processes essential for recognizing spoken words---perceptual normalization (the ability to accommodate acoustic-phonetic variability) and lexical discrimination (the ability to isolate words in the mental lexicon). In addition, the experiments were designed to examine the effects of response format on evaluation of these two abilities in normal-hearing (NH), noise-masked normal-hearing (NMNH), and cochlear implant (CI) subject populations. The speech recognition performance of NH, NMNH, and CI listeners was measured using both open- and closed-set response formats under a number of experimental conditions. To assess talker normalization abilities, identification scores for words produced by a single talker were compared with recognition performance for items produced by multiple talkers. To examine lexical discrimination, performance for words that are phonetically similar to many other words (hard words) was compared with scores for items with few phonetically similar competitors (easy words). Open-set word identification for all subjects was significantly poorer when stimuli were produced in lists with multiple talkers compared with conditions in which all of the words were spoken by a single talker. Open-set word recognition also was better for lexically easy compared with lexically hard words. Closed-set tests, in contrast, failed to reveal the effects of either talker variability or lexical difficulty even when the response alternatives provided were systematically selected to maximize confusability with target items. These findings suggest that, although closed-set tests may provide important information for clinical assessment of speech perception, they may not adequately evaluate a number of cognitive processes that are necessary for recognizing spoken words. The parallel results obtained across all subject groups indicate that NH, NMNH, and CI listeners engage similar perceptual operations to identify spoken words. Implications of these findings for the design of new test batteries that can provide comprehensive evaluations of the individual capacities needed for processing spoken language are discussed.

Development of metallization process. FSA project, cell and module formation research area

NASA Technical Reports Server (NTRS)

Garcia, A., III

1984-01-01

New pastes were evaluated that contained additives to aid in the silicon-to-metallization contact. None were completely successful. A reevaluation of the molybdenum oxide paste and the two-step screen printing process was done. The oxide paste did not show promise. The two-step process enabled soldering of the cells but the cells still had a high series resistance. Pastes are on order from a different manufacturer.

Process evaluation in a multisite, primary obesity-prevention trial in American Indian schoolchildren1–3

PubMed Central

Helitzer, Deborah L; Davis, Sally M; Gittelsohn, Joel; Going, Scott B; Murray, David M; Snyder, Patricia; Steckler, Allan B

2016-01-01

We describe the development, implementation, and use of the process evaluation component of a multisite, primary obesity prevention trial for American Indian schoolchildren. We describe the development and pilot testing of the instruments, provide some examples of the criteria for instrument selection, and provide examples of how process evaluation results were used to document and refine intervention components. The theoretical and applied framework of the process evaluation was based on diffusion theory, social learning theory, and the desire for triangulation of multiple modes of data collection. The primary objectives of the process evaluation were to systematically document the training process, content, and implementation of 4 components of the intervention. The process evaluation was developed and implemented collaboratively so that it met the needs of both the evaluators and those who would be implementing the intervention components. Process evaluation results revealed that observation and structured interviews provided the most informative data; however, these methods were the most expensive and time consuming and required the highest level of skill to undertake. Although the literature is full of idealism regarding the uses of process evaluation for formative and summative purposes, in reality, many persons are sensitive to having their work evaluated in such an in-depth, context-based manner as is described. For this reason, use of structured, quantitative, highly objective tools may be more effective than qualitative methods, which appear to be more dependent on the skills and biases of the researcher and the context in which they are used. PMID:10195608

Influence of Powder Metallurgical Processing Routes on Phase Formations in a Multicomponent NbSi-Alloy

NASA Astrophysics Data System (ADS)

Seemüller, C.; Hartwig, T.; Mulser, M.; Adkins, N.; Wickins, M.; Heilmaier, M.

2014-09-01

Refractory metal silicide composites on the basis of Nbss-Nb5Si3 have been investigated as potential alternatives for nickel-base superalloys for years because of their low densities and good high-temperature strengths. NbSi-based composites are typically produced by arc-melting or casting. Samples in this study, however, were produced by powder metallurgy because of the potential for near net-shape component fabrication with very homogeneous microstructures. Either gas atomized powder or high-energy mechanically alloyed elemental powders were compacted by powder injection molding or hot isostatic pressing. Heat treatments were applied for phase stability evaluation. Slight compositional changes (oxygen, nitrogen, or iron) introduced by the processing route, i.e., powder production and consolidation, can affect phase formations and phase transitions during the process. Special focus is put on the distinction between different silicides (Nb5Si3 and Nb3Si) and silicide modifications (α-, β-, and γ-Nb5Si3), respectively. These were evaluated by x-ray diffraction and energy-dispersive spectroscopy measurements with the additional inclusion of thermodynamic calculations using the calculated phase diagram method.

Refinement of determination of critical thresholds of stress-strain behaviour by using AE data: potential for evaluation of durability of natural stone

NASA Astrophysics Data System (ADS)

Prikryl, Richard; Lokajíček, Tomáš

2017-04-01

According to previous studies, evaluation of stress-strain behaviour (in uniaxial compression) of various rocks appears to be effective tool allowing for prediction of resistance of natural stone to some physical weathering processes. Precise determination of critical thresholds, specifically of 'crack initiation' and 'crack damage' is fundamental issue in this approach. In contrast to 'crack damage stress/strain threshold', which can be easily read from deflection point on volumetric curve, detection of 'crack initiation' is much more difficult. Besides previously proposed mathematical processing of axial stress-strain curve, recording of acoustic emission (AE) data and their processing provide direct measure of various stress/strain thresholds, specifically of 'crack initiation'. This specific parameter is required during successive computation of energetic parameters (mechanical work), that can be stored by a material without formation of new defects (microcracks) due to acting stress. Based on our experimental data, this mechanical work seems to be proportional to the resistance of a material to formation of mode I (tensile) cracks that are responsible for destruction of subsurface below exposed faces of natural stone.

Evaluation of the influence of proline, hydroxyproline or pyrrolidine in the presence of sodium nitrite on N-nitrosamine formation when heating cured meat.

PubMed

Drabik-Markiewicz, G; Dejaegher, B; De Mey, E; Impens, S; Kowalska, T; Paelinck, H; Vander Heyden, Y

2010-01-11

N-nitrosamines are meant to be probable or possible carcinogenic components, possibly formed out of a reaction between nitrite and N-containing substances such as amino acids and secondary amines. Nitrite is often used for processing meat products because of its colouring and antimicrobial properties. During this experimental setup, the influence of proline, hydroxyproline or pyrrolidine on N-nitrosamine formation in meat samples was evaluated. The N-nitrosamines concentrations were measured with gas chromatography-thermal energy analyzer. Only the concentrations of N-nitrosodimethylamine and N-nitrosopyrrolidine were found above the limit of detection in a number of tested experimental conditions. The concentration of these two N-nitrosamines was modelled as a function of temperature and nitrite concentration for different situations (presence or absence of added natural N-containing meat components). It could be concluded that proline and pyrrolidine promoted the formation of N-nitrosopyrrolidine. It could also be confirmed that the higher the temperature of the meat processing procedure and the higher the sodium nitrite amounts added, the higher were the yields of the respective N-nitrosamines.

Estimation techniques and simulation platforms for 77 GHz FMCW ACC radars

NASA Astrophysics Data System (ADS)

Bazzi, A.; Kärnfelt, C.; Péden, A.; Chonavel, T.; Galaup, P.; Bodereau, F.

2012-01-01

This paper presents two radar simulation platforms that have been developed and evaluated. One is based on the Advanced Design System (ADS) and the other on Matlab. Both platforms are modeled using homodyne front-end 77 GHz radar, based on commercially available monolithic microwave integrated circuits (MMIC). Known linear modulation formats such as the frequency modulation continuous wave (FMCW) and three-segment FMCW have been studied, and a new variant, the dual FMCW, is proposed for easier association between beat frequencies, while maintaining an excellent distance estimation of the targets. In the signal processing domain, new algorithms are proposed for the three-segment FMCW and for the dual FMCW. While both of these algorithms present the choice of either using complex or real data, the former allows faster signal processing, whereas the latter enables a simplified front-end architecture. The estimation performance of the modulation formats has been evaluated using the Cramer-Rao and Barankin bounds. It is found that the dual FMCW modulation format is slightly better than the other two formats tested in this work. A threshold effect is found at a signal-to-noise ratio (SNR) of 12 dB which means that, to be able to detect a target, the SNR should be above this value. In real hardware, the SNR detection limit should be set to about at least 15 dB.

Evaluative Conditioning: The “How” Question

PubMed Central

Jones, Christopher R.; Olson, Michael A.; Fazio, Russell H.

2011-01-01

Evaluative conditioning (EC) refers to attitude formation or change toward an object due to that object's mere co-occurrence with another valenced object or objects. This chapter focuses on the “how” question, that is, the question of what cognitive processes intervene between mere co-occurrence and attitude formation or change. Though EC has typically been thought of as occurring through a single, albeit contentious, mechanism, we begin by pointing out that both the heterogeneity of EC methodologies and the abundance of inconsistent results suggest that multiple processes with different characteristics can produce EC. We describe how the earliest posited process of EC, Pavlovian conditioning or signal learning, is a valid mechanism of EC that appears to have operated in some experiments but is unlikely to have operated in others and also cannot account for various EC findings. We describe other mechanisms of EC, when they can be expected to occur, and what characteristics they have. We particularly focus our attention on a process model of EC we have recently introduced, the implicit misattribution model. Finally, we describe the implications of a multi-process view of EC, which we argue can help resolve theoretical controversies and further the application of EC as a practical intervention for influencing attitudes in various domains. PMID:22241936

Evaluation of Ohio River NOM Variability and NOM Concentration vs. Reconstitution

EPA Science Inventory

Surface water contains natural organic matter (NOM) which reacts with disinfectants creating disinfection byproducts (DBPs), some of which are USEPA regulated contaminants. Characterizing NOM can provide important insight on DBP formation and water treatment process adaptation t...

THE SOLAR TRANSFORMITY OF OIL AND PETROLEUM NATURAL GAS

EPA Science Inventory

This paper presents an emergy evaluation of the biogeochemical process of petroleum formation. Unlike the previous calculation, in which the transformity of crude oil was back calculated from the relative efficiency of electricity production and factors relating coal to transport...

Basic Information for EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM)

EPA Pesticide Factsheets

Contains basic information on the role and origins of the Selected Analytical Methods including the formation of the Homeland Security Laboratory Capacity Work Group and the Environmental Evaluation Analytical Process Roadmap for Homeland Security Events

Development, implementation and evaluation of a peer review of teaching (PRoT) initiative in nursing education.

PubMed

Mager, Diana R; Kazer, Meredith W; Conelius, Jaclyn; Shea, Joyce; Lippman, Doris T; Torosyan, Roben; Nantz, Kathryn

2014-06-03

For many years, an area of research in higher education has been emerging around the development and implementation of fair and effective peer evaluation programs. Recently, a new body of knowledge has developed regarding the development and implementation of fair and effective peer evaluation programs resulting in formative and summative evaluations. The purpose of this article is to describe the development, implementation, and evaluation of a peer review of teaching (PRoT) program for nursing faculty, initiated at one small comprehensive university in the northeastern United States. Pairs of nursing faculty evaluated each other's teaching, syllabi, and course materials after collaborating in a pre-evaluation conference to discuss goals of the classroom visit. Qualitative data gathered in post project focus groups revealed that faculty found their modified PRoT process to be a mutually beneficial experience that was more useful, flexible and collegial, and less stressful than their previous evaluation process.

TurboTech Technical Evaluation Automated System

NASA Technical Reports Server (NTRS)

Tiffany, Dorothy J.

2009-01-01

TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

Evaluation of HCFC AK 225 Alternatives for Precision Cleaning and Verification

NASA Technical Reports Server (NTRS)

Melton, D. M.

1998-01-01

Maintaining qualified cleaning and verification processes are essential in an production environment. Environmental regulations have and are continuing to impact cleaning and verification processing in component and large structures, both at the Michoud Assembly Facility and component suppliers. The goal of the effort was to assure that the cleaning and verification proceeds unimpeded and that qualified, environmentally compliant material and process replacements are implemented and perform to specifications. The approach consisted of (1) selection of a Supersonic Gas-Liquid Cleaning System; (2) selection and evaluation of three cleaning and verification solvents as candidate alternatives to HCFC 225 (Vertrel 423 (HCFC), Vertrel MCA (HFC/1,2-Dichloroethylene), and HFE 7100DE (HFE/1,2 Dichloroethylene)); and evaluation of an analytical instrumental post cleaning verification technique. This document is presented in viewgraph format.

Computational modeling of soot nucleation

NASA Astrophysics Data System (ADS)

Chung, Seung-Hyun

Recent studies indicate that soot is the second most significant driver of climate change---behind CO2, but ahead of methane---and increased levels of soot particles in the air are linked to health hazards such as heart disease and lung cancer. Within the soot formation process, soot nucleation is the least understood step, and current experimental findings are still limited. This thesis presents computational modeling studies of the major pathways of the soot nucleation process. In this study, two regimes of soot nucleation---chemical growth and physical agglomeration---were evaluated and the results demonstrated that combustion conditions determine the relative importance of these two routes. Also, the dimerization process of polycyclic aromatic hydrocarbons, which has been regarded as one of the most important physical agglomeration processes in soot formation, was carefully examined with a new method for obtaining the nucleation rate using molecular dynamics simulation. The results indicate that the role of pyrene dimerization, which is the commonly accepted model, is expected to be highly dependent on various flame temperature conditions and may not be a key step in the soot nucleation process. An additional pathway, coronene dimerization in this case, needed to be included to improve the match with experimental data. The results of this thesis provide insight on the soot nucleation process and can be utilized to improve current soot formation models.

Format requirements of thermal neutron scattering data in a nuclear data format to succeed the ENDF format

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, D.

2014-03-31

In November 2012, the Working Party on Evaluation Cooperation Subgroup 38 (WPEC-SG38) began with the task of developing a nuclear data format and supporting infrastructure to replace the now nearly 50 year old ENDF format. The first step in this process is to develop requirements for the new format and infrastructure. In this talk, I will review the status of ENDF's Thermal Scattering Law (TSL) formats as well as support for this data in the GND format (from which the new format is expected to evolve). Finally, I hope to begin a dialog with members of the thermal neutron scatteringmore » community so that their data needs can be accurately and easily accommodated by the new format and tools, as captured by the requirements document. During this discussion, we must keep in mind that the new tools and format must; Support what is in existing data files; Support new things we want to put in data files; and Be flexible enough for us to adapt it to future unanticipated challenges.« less

Light Water Reactor Sustainability Program Operator Performance Metrics for Control Room Modernization: A Practical Guide for Early Design Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald Boring; Roger Lew; Thomas Ulrich

2014-03-01

As control rooms are modernized with new digital systems at nuclear power plants, it is necessary to evaluate the operator performance using these systems as part of a verification and validation process. There are no standard, predefined metrics available for assessing what is satisfactory operator interaction with new systems, especially during the early design stages of a new system. This report identifies the process and metrics for evaluating human system interfaces as part of control room modernization. The report includes background information on design and evaluation, a thorough discussion of human performance measures, and a practical example of how themore » process and metrics have been used as part of a turbine control system upgrade during the formative stages of design. The process and metrics are geared toward generalizability to other applications and serve as a template for utilities undertaking their own control room modernization activities.« less

A coherent light scanner for optical processing of large format transparencies

NASA Technical Reports Server (NTRS)

Callen, W. R.; Weaver, J. E.; Shackelford, R. G.; Walsh, J. R.

1975-01-01

A laser scanner is discussed in which the scanning beam is random-access addressable and perpendicular to the image input plane and the irradiance of the scanned beam is controlled so that a constant average irradiance is maintained after passage through the image plane. The scanner's optical system and design are described, and its performance is evaluated. It is noted that with this scanner, data in the form of large-format transparencies can be processed without the expense, space, maintenance, and precautions attendant to the operation of a high-power laser with large-aperture collimating optics. It is shown that the scanned format as well as the diameter of the scanning beam may be increased by simple design modifications and that higher scan rates can be achieved at the expense of resolution by employing acousto-optic deflectors with different relay optics.

Historical review of die drool phenomenon during plastics extrusion

NASA Astrophysics Data System (ADS)

Musil, Jan; Zatloukal, Martin

2013-04-01

Die drool phenomenon is defined as unwanted spontaneous accumulation of extruded polymer melt on open faces of extrusion die during extrusion process. Such accumulated material builds up on the die exit and frequently or continually sticks onto the extruded product and thus damages it. Since die drool appears, extrusion process must be shut down and die exit must be manually cleaned which is time and money consuming. Although die drool is complex phenomenon and its formation mechanism is not fully understood yet, variety of proposed explanations of its formation mechanism and also many ways to its elimination can be found in open literature. Our review presents in historical order breakthrough works in the field of die drool research, shows many ways to suppress it, introduces methods for its quantitative evaluation and composition analysis and summarizes theories of die drool formation mechanism which can be helpful for extrusion experts.

Elbow arthroscopy: valgus extension overload.

PubMed

Ahmad, Christopher S; Conway, John E

2011-01-01

Valgus torque combined with deceleration produces high compression and shear forces acting on the posteromedial olecranon and the posteromedial trochlea. This valgus extension overload process may cause posteromedial trochlea chondromalacia, chondral flap formation, osteochondrosis, subchondral erosion, a subchondral insufficiency fracture, and marginal exostosis formation. Olecranon pathologies include proximal stress reaction, a posteromedial tip stress fracture, a transverse proximal process stress fracture, exostosis formation, exostosis fragmentation, and intra-articular loose bodies. Symptoms include posteromedial elbow pain during the deceleration phase of the throwing motion. The extension impingement test reproduces posterior or posteromedial pain similar to that experienced while throwing. Special radiographic techniques and CT scans can show loose bodies and osteophyte fragmentation. Surgical treatment is indicated when symptoms persist despite nonsurgical management. Based on clinical and basic science research, all patients with valgus extension overload should be comprehensively evaluated for medial ulnar collateral ligament insufficiency. Surgical treatment is limited to the resection of osteophytes only; normal olecranon should not be resected.

Evaluation of the pair-culture effect in Ophyryotrocha puerilis (Polychaeta: Dorvilleidae). II. Conditions for the moult of the upper jaw

NASA Astrophysics Data System (ADS)

Kegel, B.; Pfannenstiel, H.-D.

1983-06-01

The conditions for moult of the upper jaw of Ophryotrocha puerilis were determined in isolated individuals and in groups of various sizes. The frequency of formation of the complicated upper jaw in both isolated individuals and in groups varies to a considerable extent. Although formation of the upper jaw and sex reversal normally are associated processes, the relationship of these two processes is not very well understood. Histological investigations at the light microscopic level demonstrate that the dental apparatus is an elaboration of the ectodermal stomodaeum which is considered to be a highly specialized part of the cuticle in the pharyngeal region of the gut.

Adding Confidence to Knowledge

ERIC Educational Resources Information Center

Goodson, Ludwika Aniela; Slater, Don; Zubovic, Yvonne

2015-01-01

A "knowledge survey" and a formative evaluation process led to major changes in an instructor's course and teaching methods over a 5-year period. Design of the survey incorporated several innovations, including: a) using "confidence survey" rather than "knowledge survey" as the title; b) completing an instructional…

Integrated Chemical and Toxicological Investigation of UV-Chlorine/Chloramine Drinking Water Treatment

EPA Science Inventory

As the use of alternative drinking water treatment increases, it is important to understand potential public health•implications associated with these processes. The objective of this study was to evaluate the formation of disinfection byproducts (DBPs) and cytotoxicity of ...

Process Features in Writing: Internal Structure and Incremental Value over Product Features. Research Report. ETS RR-15-27

ERIC Educational Resources Information Center

Zhang, Mo; Deane, Paul

2015-01-01

In educational measurement contexts, essays have been evaluated and formative feedback has been given based on the end product. In this study, we used a large sample collected from middle school students in the United States to investigate the factor structure of the writing process features gathered from keystroke logs and the association of that…

Preliminary evaluation of waste processing in a CELSS

NASA Technical Reports Server (NTRS)

Jacquez, Ricardo B.

1990-01-01

Physical/chemical, biological, and hybrid methods can be used in a space environment for processing wastes generated by a Closed Ecological Life Support System (CELSS). Two recycling scenarios are presented. They reflect differing emphases on and responses to the waste system formation rates and their composition, as well as indicate the required products from waste treatment that are needed in a life support system.

Evaluation of drug reviews.

PubMed

Hendrickson, N M; Amerson, A B

1986-10-01

Drug reviews appearing in Clinical Pharmacy, Drug Intelligence and Clinical Pharmacy (DICP), Drugs, and Pharmacotherapy from January 1982 through December 1984 were evaluated for number, duplication among journals, timeliness, scope, and format. The design of this study was primarily quantitative rather than qualitative. Pharmacotherapy published the most reviews (49), followed by Drugs (43), Clinical Pharmacy (37), and DICP (29). Drugs and Pharmacotherapy published the largest number of unique reviews (agents not reviewed by the other journals during the study period), while Pharmacotherapy and Clinical Pharmacy published the most reviews on newly marketed drugs. Reviews of four drugs (acyclovir, moxalactam, ranitidine, and trazodone) were compared in terms of major sections, terminology and format, bibliography, use of tables and figures, scope of evaluative comments, and review process. Reviews in Drugs consistently contained the most references and tables and provided the most detail. Information was most accessible in Drugs, followed by Pharmacotherapy. Drugs used the largest panel of reviewers. All of the journals provided evaluative comments, although the scope varied. Continuing-education credit is available for review articles in Clinical Pharmacy and DICP. In selecting one or more of these journals, individuals or institutions should compare their needs with regard to the timeliness, scope, and format of the review articles in each journal.

Using formative evaluation in an implementation project to increase vaccination rates in high-risk veterans: QUERI Series

PubMed Central

Wallace, Carolyn M; Legro, Marcia W

2008-01-01

Background Implementation of research into practice in health care systems is a challenging and often unsuccessful endeavor. The United States Department of Veterans Affairs (VA) Quality Enhancement Research Initiative (QUERI) research teams include formative evaluations (FE) in their action-oriented VA implementation projects to identify critical information about the processes of implementation that can guide adjustments to project activities, in order to better meet project goals. This article describes the development and use of FE in an action-oriented implementation research project. Methods This two-year action-oriented implementation research project was conducted at 23 VA Spinal Cord Injury (SCI) Centers, and targeted patients, staff and the system of care, such as administration and information technology. Data for FE were collected by electronic and paper surveys, semi-structured and open-ended interviews, notes during conference calls, and exchange of e-mail messages. Specific questions were developed for each intervention (designed to improve vaccination rates for influenza in veterans with spinal cord injury and disorder); informants were selected for their knowledge of interventions and their use in SCI Centers. Results Data from FE were compiled separately for each intervention to describe barriers to progress and guide adjustments to implementation activities. These data addressed the processes of implementing the interventions, problem-solving activities and the status of interventions at SCI Centers. Conclusion Formative evaluations provided the project team with a broad view of the processes of implementing multi-targeted interventions as well as the evolving status of the related best practice. Using FE was useful, although the challenges of conducting FE for non-field researchers should be addressed. Work is needed to develop methods for conducting FE across multiple sites, as well as acknowledging variations in local contexts that affect implementation of interventions. PMID:18430201

Short communication: Evaluation of a sol-gel-based stainless steel surface modification to reduce fouling and biofilm formation during pasteurization of milk.

PubMed

Liu, Dylan Zhe; Jindal, Shivali; Amamcharla, Jayendra; Anand, Sanjeev; Metzger, Lloyd

2017-04-01

Milk fouling and biofilms are common problems in the dairy industry across many types of processing equipment. One way to reduce milk fouling and biofilms is to modify the characteristics of milk contact surfaces. This study examines the viability of using Thermolon (Porcelain Industries Inc., Dickson, TN), a sol-gel-based surface modification of stainless steel, during thermal processing of milk. We used stainless steel 316L (control) and sol-gel-modified coupons in this study to evaluate fouling behavior and bacterial adhesion. The surface roughness as measured by an optical profiler indicated that the control coupons had a slightly smoother finish. Contact angle measurements showed that the modified surface led to a higher water contact angle, suggesting a more hydrophobic surface. The modified surface also had a lower surface energy (32.4 ± 1.4 mN/m) than the control surface (41.36 ± 2.7 mN/m). We evaluated the susceptibility of control and modified stainless steel coupons to fouling in a benchtop plate heat exchanger. We observed a significant reduction in the amount of fouled layer on modified surfaces. We found an average fouling weight of 19.21 mg/cm 2 and 0.37 mg/cm 2 on the control and modified stainless steel coupons, respectively. We also examined the adhesion of Bacillus and biofilm formation, and observed that the modified stainless steel surface offered greater resistance to biofilm formation. Overall, the Thermolon-modified surface showed potential in the thermal processing of milk, offering significantly lower fouling and bacterial attachment than the control surface. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Differences in 3D vs. 2D analysis in lumbar spinal fusion simulations.

PubMed

Hsu, Hung-Wei; Bashkuev, Maxim; Pumberger, Matthias; Schmidt, Hendrik

2018-04-27

Lumbar interbody fusion is currently the gold standard in treating patients with disc degeneration or segmental instability. Despite it having been used for several decades, the non-union rate remains high. A failed fusion is frequently attributed to an inadequate mechanical environment after instrumentation. Finite element (FE) models can provide insights into the mechanics of the fusion process. Previous fusion simulations using FE models showed that the geometries and material of the cage can greatly influence the fusion outcome. However, these studies used axisymmetric models which lacked realistic spinal geometries. Therefore, different modeling approaches were evaluated to understand the bone-formation process. Three FE models of the lumbar motion segment (L4-L5) were developed: 2D, Sym-3D and Nonsym-3D. The fusion process based on existing mechano-regulation algorithms using the FE simulations to evaluate the mechanical environment was then integrated into these models. In addition, the influence of different lordotic angles (5, 10 and 15°) was investigated. The volume of newly formed bone, the axial stiffness of the whole segment and bone distribution inside and surrounding the cage were evaluated. In contrast to the Nonsym-3D, the 2D and Sym-3D models predicted excessive bone formation prior to bridging (peak values with 36 and 9% higher than in equilibrium, respectively). The 3D models predicted a more uniform bone distribution compared to the 2D model. The current results demonstrate the crucial role of the realistic 3D geometry of the lumbar motion segment in predicting bone formation after lumbar spinal fusion. Copyright © 2018 Elsevier Ltd. All rights reserved.

Analysis and evaluation in the production process and equipment area of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1979-01-01

Analyses of slicing processes and junction formation processes are presented. A simple method for evaluation of the relative economic merits of competing process options with respect to the cost of energy produced by the system is described. An energy consumption analysis was developed and applied to determine the energy consumption in the solar module fabrication process sequence, from the mining of the SiO2 to shipping. The analysis shows that, in current technology practice, inordinate energy use in the purification step, and large wastage of the invested energy through losses, particularly poor conversion in slicing, as well as inadequate yields throughout. The cell process energy expenditures already show a downward trend based on increased throughput rates. The large improvement, however, depends on the introduction of a more efficient purification process and of acceptable ribbon growing techniques.

Theoretical analysis of degradation mechanisms in the formation of morphogen gradients

NASA Astrophysics Data System (ADS)

Bozorgui, Behnaz; Teimouri, Hamid; Kolomeisky, Anatoly B.

2015-07-01

Fundamental biological processes of development of tissues and organs in multicellular organisms are governed by various signaling molecules, which are called morphogens. It is known that spatial and temporal variations in the concentration profiles of signaling molecules, which are frequently referred as morphogen gradients, lead to a cell differentiation via activating specific genes in a concentration-dependent manner. It is widely accepted that the establishment of the morphogen gradients involves multiple biochemical reactions and diffusion processes. One of the critical elements in the formation of morphogen gradients is a degradation of signaling molecules. We develop a new theoretical approach that provides a comprehensive description of the degradation mechanisms. It is based on the idea that the degradation works as an effective potential that drives the signaling molecules away from the source region. Utilizing the method of first-passage processes, the dynamics of the formation of morphogen gradients for various degradation mechanisms is explicitly evaluated. It is found that linear degradation processes lead to a dynamic behavior specified by times to form the morphogen gradients that depend linearly on the distance from the source. This is because the effective potential due to the degradation is quite strong. At the same time, nonlinear degradation mechanisms yield a quadratic scaling in the morphogen gradients formation times since the effective potentials are much weaker. Physical-chemical explanations of these phenomena are presented.

An investigation of voids formation mechanisms and their effects on freeze and thaw processes of lithium and lithium fluoride

NASA Technical Reports Server (NTRS)

El-Genk, Mohamed S.; Yang, Jae-Young

1991-01-01

The mechanisms of void formation during the cooldown and freezing of lithium coolant within the primary loop of SP-100 type systems are investigated. These mechanisms are: (1) homogeneous nucleation; (2) heterogeneous nucleation; (3) normal segregation of helium gas dissolved in liquid lithium; and (4) shrinkage of lithium during freezing. To evaluate the void formation potential due to segregation, a numerical scheme that couples the freezing and mass diffusion processes in both the solid and liquid regions is developed. The results indicated that the formation of He bubbles is unlikely by either homogeneous or heterogeneous nucleation during the cooldown process. However, homogeneous nucleation of He bubbles following the segregation of dissolved He in liquid lithium ahead of the solid-liquid interface is likely to occur. Results also show that total volume of He void is insignificant when compared to that of shrinkage voids. In viewing this, the subsequent research focuses on the effects of shrinkage void forming during freezing of lithium on subsequent thaw processes are investigated using a numerical scheme that is based on a single (solid/liquid) cell approach. The cases of lithium-fluoride are also investigated to show the effect of larger volume shrinkage upon freezing on the freeze and thaw processes. Results show that a void forming at the wall appreciably reduces the solid-liquid interface velocity, during both freeze and thaw, and causes a substantial rise in the wall temperature during thaw. However, in the case of Li, the maximum wall temperature was much lower than the melting temperature of PWC-11, which is used as the structure material in the SP-100 system. Hence, it is included that a formation of hot spots is unlikely during the startup or restart of the SP-100 system.

Optimizing isothiocyanate formation during enzymatic glucosinolate breakdown by adjusting pH value, temperature and dilution in Brassica vegetables and Arabidopsis thaliana

NASA Astrophysics Data System (ADS)

Hanschen, Franziska S.; Klopsch, Rebecca; Oliviero, Teresa; Schreiner, Monika; Verkerk, Ruud; Dekker, Matthijs

2017-01-01

Consumption of glucosinolate-rich Brassicales vegetables is associated with a decreased risk of cancer with enzymatic hydrolysis of glucosinolates playing a key role. However, formation of health-promoting isothiocyanates is inhibited by the epithiospecifier protein in favour of nitriles and epithionitriles. Domestic processing conditions, such as changes in pH value, temperature or dilution, might also affect isothiocyanate formation. Therefore, the influences of these three factors were evaluated in accessions of Brassica rapa, Brassica oleracea, and Arabidopsis thaliana. Mathematical modelling was performed to determine optimal isothiocyanate formation conditions and to obtain knowledge on the kinetics of the reactions. At 22 °C and endogenous plant pH, nearly all investigated plants formed nitriles and epithionitriles instead of health-promoting isothiocyanates. Response surface models, however, clearly demonstrated that upon change in pH to domestic acidic (pH 4) or basic pH values (pH 8), isothiocyanate formation considerably increases. While temperature also affects this process, the pH value has the greatest impact. Further, a kinetic model showed that isothiocyanate formation strongly increases due to dilution. Finally, the results show that isothiocyanate intake can be strongly increased by optimizing the conditions of preparation of Brassicales vegetables.

Feedback in formative OSCEs: comparison between direct observation and video-based formats

PubMed Central

Junod Perron, Noëlle; Louis-Simonet, Martine; Cerutti, Bernard; Pfarrwaller, Eva; Sommer, Johanna; Nendaz, Mathieu

2016-01-01

Introduction Medical students at the Faculty of Medicine, University of Geneva, Switzerland, have the opportunity to practice clinical skills with simulated patients during formative sessions in preparation for clerkships. These sessions are given in two formats: 1) direct observation of an encounter followed by verbal feedback (direct feedback) and 2) subsequent review of the videotaped encounter by both student and supervisor (video-based feedback). The aim of the study was to evaluate whether content and process of feedback differed between both formats. Methods In 2013, all second- and third-year medical students and clinical supervisors involved in formative sessions were asked to take part in the study. A sample of audiotaped feedback sessions involving supervisors who gave feedback in both formats were analyzed (content and process of the feedback) using a 21-item feedback scale. Results Forty-eight audiotaped feedback sessions involving 12 supervisors were analyzed (2 direct and 2 video-based sessions per supervisor). When adjusted for the length of feedback, there were significant differences in terms of content and process between both formats; the number of communication skills and clinical reasoning items addressed were higher in the video-based format (11.29 vs. 7.71, p=0.002 and 3.71 vs. 2.04, p=0.010, respectively). Supervisors engaged students more actively during the video-based sessions than during direct feedback sessions (self-assessment: 4.00 vs. 3.17, p=0.007; active problem-solving: 3.92 vs. 3.42, p=0.009). Students made similar observations and tended to consider that the video feedback was more useful for improving some clinical skills. Conclusion Video-based feedback facilitates discussion of clinical reasoning, communication, and professionalism issues while at the same time actively engaging students. Different time and conceptual frameworks may explain observed differences. The choice of feedback format should depend on the educational goal. PMID:27834170

Feedback in formative OSCEs: comparison between direct observation and video-based formats.

PubMed

Junod Perron, Noëlle; Louis-Simonet, Martine; Cerutti, Bernard; Pfarrwaller, Eva; Sommer, Johanna; Nendaz, Mathieu

2016-01-01

Medical students at the Faculty of Medicine, University of Geneva, Switzerland, have the opportunity to practice clinical skills with simulated patients during formative sessions in preparation for clerkships. These sessions are given in two formats: 1) direct observation of an encounter followed by verbal feedback (direct feedback) and 2) subsequent review of the videotaped encounter by both student and supervisor (video-based feedback). The aim of the study was to evaluate whether content and process of feedback differed between both formats. In 2013, all second- and third-year medical students and clinical supervisors involved in formative sessions were asked to take part in the study. A sample of audiotaped feedback sessions involving supervisors who gave feedback in both formats were analyzed (content and process of the feedback) using a 21-item feedback scale. Forty-eight audiotaped feedback sessions involving 12 supervisors were analyzed (2 direct and 2 video-based sessions per supervisor). When adjusted for the length of feedback, there were significant differences in terms of content and process between both formats; the number of communication skills and clinical reasoning items addressed were higher in the video-based format (11.29 vs. 7.71, p= 0.002 and 3.71 vs. 2.04, p= 0.010, respectively). Supervisors engaged students more actively during the video-based sessions than during direct feedback sessions (self-assessment: 4.00 vs. 3.17, p= 0.007; active problem-solving: 3.92 vs. 3.42, p= 0.009). Students made similar observations and tended to consider that the video feedback was more useful for improving some clinical skills. Video-based feedback facilitates discussion of clinical reasoning, communication, and professionalism issues while at the same time actively engaging students. Different time and conceptual frameworks may explain observed differences. The choice of feedback format should depend on the educational goal.

Antioxidant characterization and sensory evaluation during storage of ultraviolet-B light exposed baby carrots (abstract)

USDA-ARS?s Scientific Manuscript database

Baby carrot processing induces wounding stress activation of phenylalanine ammonia-lyase (PAL), enhancing its nutrient content by increasing synthesis of secondary metabolites. Ultraviolet-B (UV-B) exposure further promotes the formation of soluble phenolic compounds, significantly increasing antiox...

IEP Common Talk. PAGE Bulletin.

ERIC Educational Resources Information Center

Pennsylvania Association for Gifted Education, Norristown.

This bulletin presents basic information for parents about identification and services for gifted students in Pennsylvania. Written in a question and answer format, the bulletin addresses the following concerns: the Individualized Education Program (IEP) required for all exceptional students in the state; the multi-disciplinary evaluation process;…

Research on the discharge characteristics for water tree in crosslinked polyethylene cable based on plasma-chemical model

NASA Astrophysics Data System (ADS)

Fan, Yang; Qi, Yang; Bing, Gao; Rong, Xia; Yanjie, Le; Iroegbu, Paul Ikechukwu

2018-03-01

Water tree is the predominant defect in high-voltage crosslinked polyethylene cables. The microscopic mechanism in the discharge process is not fully understood; hence, a drawback is created towards an effective method to evaluate the insulation status. In order to investigate the growth of water tree, a plasma-chemical model is developed. The dynamic characteristics of the discharge process including voltage waveform, current waveform, electron density, electric potential, and electric field intensity are analyzed. Our results show that the distorted electric field is the predominant contributing factor of electron avalanche formation, which inevitably leads to the formation of pulse current. In addition, it is found that characteristic parameters such as the pulse width and pulse number have a great relevance to the length of water tree. Accordingly, the growth of water tree can be divided into the initial stage, development stage, and pre-breakdown stage, which provides a reference for evaluating the deteriorated stages of crosslinked polyethylene cables.

An evaluation of the process and initial impact of disseminating a nursing e-thesis.

PubMed

Macduff, Colin

2009-05-01

This paper is a report of a study conducted to evaluate product, process and outcome aspects of the dissemination of a nursing PhD thesis via an open-access electronic institutional repository. Despite the growth of university institutional repositories which make theses easily accessible via the world wide web, nursing has been very slow to evaluate related processes and outcomes. Drawing on Stake's evaluation research methods, a case study design was adopted. The case is described using a four-phase structure within which key aspects of process and impact are reflexively analysed. In the conceptualization/re-conceptualization phase, fundamental questions about the purpose, format and imagined readership for a published nursing PhD were considered. In the preparation phase, seven key practical processes were identified that are likely to be relevant to most e-theses. In the dissemination phase email invitations were primarily used to invite engagement. The evaluation phase involved quantitative indicators of initial impact, such as page viewing and download statistics and qualitative feedback on processes and product. Analysis of process and impact elements of e-thesis dissemination is likely to have more than intrinsic value. The advent of e-theses housed in web-based institutional repositories has the potential to transform thesis access and use. It also offers potential to transform the nature and scope of thesis production and dissemination. Nursing scholars can exploit and evaluate such opportunities.

Dust Destruction in the ISM: A Re-Evaluation of Dust Lifetimes

NASA Technical Reports Server (NTRS)

Jones, A. P.; Nuth, J. A., III

2011-01-01

There is a long-standing conundrum in interstellar dust studies relating to the discrepancy between the time-scales for dust formation from evolved stars and the apparently more rapid destruction in supernova-generated shock waves. Aims. We re-examine some of the key issues relating to dust evolution and processing in the interstellar medium. Methods. We use recent and new constraints from observations, experiments, modelling and theory to re-evaluate dust formation in the interstellar medium (ISM). Results. We find that the discrepancy between the dust formation and destruction time-scales may not be as significant as has previously been assumed because of the very large uncertainties involved. Conclusions. The derived silicate dust lifetime could be compatible with its injection time-scale, given the inherent uncertainties in the dust lifetime calculation. The apparent need to re-form significant quantities of silicate dust in the tenuous interstellar medium may therefore not be a strong requirement. Carbonaceous matter, on the other hand, appears to be rapidly recycled in the ISM and, in contrast to silicates, there are viable mechanisms for its re-formation in the ISM.

A new method of evaluating tight gas sands pore structure from nuclear magnetic resonance (NMR) logs

NASA Astrophysics Data System (ADS)

Xiao, Liang; Mao, Zhi-qiang; Xie, Xiu-hong

2016-04-01

Tight gas sands always display such characteristics of ultra-low porosity, permeability, high irreducible water, low resistivity contrast, complicated pore structure and strong heterogeneity, these make that the conventional methods are invalid. Many effective gas bearing formations are considered as dry zones or water saturated layers, and cannot be identified and exploited. To improve tight gas sands evaluation, the best method is quantitative characterizing rock pore structure. The mercury injection capillary pressure (MICP) curves are advantageous in predicting formation pore structure. However, the MICP experimental measurements are limited due to the environment and economy factors, this leads formation pore structure cannot be consecutively evaluated. Nuclear magnetic resonance (NMR) logs are considered to be promising in evaluating rock pore structure. Generally, to consecutively quantitatively evaluate tight gas sands pore structure, the best method is constructing pseudo Pc curves from NMR logs. In this paper, based on the analysis of lab experimental results for 20 core samples, which were drilled from tight gas sandstone reservoirs of Sichuan basin, and simultaneously applied for lab MICP and NMR measurements, the relationships of piecewise power function between nuclear magnetic resonance (NMR) transverse relaxation T2 time and pore-throat radius Rc are established. A novel method, which is used to transform NMR reverse cumulative curve as pseudo capillary pressure (Pc) curve is proposed, and the corresponding model is established based on formation classification. By using this model, formation pseudo Pc curves can be consecutively synthesized. The pore throat radius distribution, and pore structure evaluation parameters, such as the average pore throat radius (Rm), the threshold pressure (Pd), the maximum pore throat radius (Rmax) and so on, can also be precisely extracted. After this method is extended into field applications, several tight gas sandstone reservoirs are processed, and the predicted results are compared with core derived results. Good consistency between evaluated results with core derived results illustrates the dependability of the proposed method. Comparing with the previous methods, this presented model is much more theoretical, and the applicability is much improved. Combining with the evaluated results, our target tight gas sands are well evaluated, and many potential gas-bearing layers are effectively identified.

Longitudinal in vivo evaluation of bone regeneration by combined measurement of multi-pinhole SPECT and micro-CT for tissue engineering

NASA Astrophysics Data System (ADS)

Lienemann, Philipp S.; Metzger, Stéphanie; Kiveliö, Anna-Sofia; Blanc, Alain; Papageorgiou, Panagiota; Astolfo, Alberto; Pinzer, Bernd R.; Cinelli, Paolo; Weber, Franz E.; Schibli, Roger; Béhé, Martin; Ehrbar, Martin

2015-05-01

Over the last decades, great strides were made in the development of novel implants for the treatment of bone defects. The increasing versatility and complexity of these implant designs request for concurrent advances in means to assess in vivo the course of induced bone formation in preclinical models. Since its discovery, micro-computed tomography (micro-CT) has excelled as powerful high-resolution technique for non-invasive assessment of newly formed bone tissue. However, micro-CT fails to provide spatiotemporal information on biological processes ongoing during bone regeneration. Conversely, due to the versatile applicability and cost-effectiveness, single photon emission computed tomography (SPECT) would be an ideal technique for assessing such biological processes with high sensitivity and for nuclear imaging comparably high resolution (<1 mm). Herein, we employ modular designed poly(ethylene glycol)-based hydrogels that release bone morphogenetic protein to guide the healing of critical sized calvarial bone defects. By combined in vivo longitudinal multi-pinhole SPECT and micro-CT evaluations we determine the spatiotemporal course of bone formation and remodeling within this synthetic hydrogel implant. End point evaluations by high resolution micro-CT and histological evaluation confirm the value of this approach to follow and optimize bone-inducing biomaterials.

The influence of negative ions in helium-oxygen barrier discharges: III. Simulation of laser photodetachment and comparison with experiment

NASA Astrophysics Data System (ADS)

Nemschokmichal, Sebastian; Tschiersch, Robert; Meichsner, Jürgen

2017-11-01

The laser photodetachment experiment in a diffuse helium-oxygen barrier discharge is evaluated by a 1D fluid simulation. As in the experiment, the simulated discharge operates in helium with 400 {ppm} oxygen admixture at 500 {mbar} inside a discharge gap of 3 {mm}. The laser photodetachment is included by the interaction of negative ions with a temporally and spatially dependent photon flux. The simulation with the usually applied set of reactions and rate coefficients provides a much lower negative ion density than needed to explain the impact on the discharge characteristics in the experiment. Further processes for an enhanced negative ion formation and their capabilities of reproducing the experimental results are discussed. These further processes are additional attachment processes in the volume and the negative ion formation at the negatively charged dielectric. Both approaches are able to reproduce the measured laser photodetachment effect partially, but the best agreement with the experimental results is achieved with the formation of negative ions at the negatively charged dielectric.

Re-evaluating the oceanic magnesium and magnesium isotope budgets - the contribution of authigenic mineral formation in marine sediments

NASA Astrophysics Data System (ADS)

Berg, R. D.; Solomon, E. A.

2016-12-01

Formation of authigenic minerals in marine sediments is a globally significant geochemical process for several major element cycles in the ocean on the 105-107 year time scale, including the sulfur, potassium, and calcium cycles. However, the significance of these processes to the magnesium (Mg) cycle have not yet been well constrained, and thus are not typically included in global oceanic Mg budgets. Exclusion of this authigenic sink for Mg affects work derived from the existing Mg and Mg isotope budgets in the fields of paleo-oceanography and global geochemical cycling. To robustly constrain the magnitude of this sedimentary Mg sink in continental slope, rise, and abyssal environments, we estimate rates of Mg uptake in marine sediments using reactive-transport modeling of 200 pore water solute concentration profiles measured during scientific ocean drilling expeditions. The depth-integrated rates of Mg uptake are extrapolated globally using statistical machine learning methods, which are particularly well-suited for using with the wide variety of environments represented in the ocean drilling dataset. Due to the differences in Mg isotope fractionation during formation of authigenic clays versus carbonates, the relative proportion of the Mg flux being sequestered by these minerals may have a major effect on the oceanic Mg isotope record. We evaluate the processes controlling Mg uptake (authigenic clay and carbonate formation) at representative continental margin locations using pore water Mg isotope measurements. Results indicate that rates of Mg uptake are over an order of magnitude higher in continental margin settings than in the abyssal environment, likely due to greater organic matter degradation resulting in higher rates of carbonate formation and in situ weathering of primary silicates to authigenic clays. Preliminary results show that authigenic mineral formation in marine sediments is a major sink for Mg in the ocean, rivaling the ridge-crest hydrothermal sink. The quantification of this Mg sink and associated Mg isotope fractionation provides more accurate constraints on the modern global Mg budget, and provides a benchmark for models and interpretations of the paleooceanographic Mg isotope record.

Influence of putrescine, cadaverine, spermidine or spermine on the formation of N-nitrosamine in heated cured pork meat.

PubMed

Drabik-Markiewicz, G; Dejaegher, B; De Mey, E; Kowalska, T; Paelinck, H; Vander Heyden, Y

2011-06-15

The influence of biogenic amines (i.e. putrescine, cadaverine, spermidine and spermine) on the N-nitrosamine formation in heated cured lean meat was studied in the presence or absence of sodium nitrite and at different meat processing temperatures. Experimental evidence was produced using gas chromatography with thermal energy analysis detection (GC-TEA). Concentration of N-nitrosamines was modelled as a function of the temperature and the nitrite concentration for two situations, i.e. presence or absence of added biogenic amines to the meat. The significance of the influence of the changing parameters was evaluated by ANOVA (Analysis of Variance). It was found that higher processing temperatures and higher added amounts of sodium nitrite increase the yields of N-nitrosodimethylamine (NDMA) and N-nitrosopiperidine (NPIP). Spermidine and putrescine amplify the formation of NDMA, but spermine and cadeverine do not influence the formation of this N-nitrosamine. Spermidine and cadeverine cause a significant increase of NPIP. Beside N-nitrosopyrrolidine (NPYR) in some rare cases, no other volatile N-nitrosamines are detected. Copyright © 2010 Elsevier Ltd. All rights reserved.

CREB and the discovery of cognitive enhancers.

PubMed

Scott, Roderick; Bourtchuladze, Rusiko; Gossweiler, Scott; Dubnau, Josh; Tully, Tim

2002-01-01

In the past few years, a series of molecular-genetic, biochemical, cellular and behavioral studies in fruit flies, sea slugs and mice have confirmed a long-standing notion that long-term memory formation depends on the synthesis of new proteins. Experiments focused on the cAMP-responsive transcription factor, CREB, have established that neural activity-induced regulation of gene transcription promotes a synaptic growth process that strengthens the connections among active neurons. This process constitutes a physical basis for the engram--and CREB is a "molecular switch" to produce the engram. Helicon Therapeutics has been formed to identify drug compounds that enhance memory formation via augmentation of CREB biochemistry. Candidate compounds have been identified from a high throughput cell-based screen and are being evaluated in animal models of memory formation. A gene discovery program also seeks to identify new genes, which function downstream of CREB during memory formation, as a source for new drug discoveries in the future. Together, these drug and gene discovery efforts promise new class of pharmaceutical therapies for the treatment of various forms of cognitive dysfunction.

Human plasma enhances the expression of Staphylococcal microbial surface components recognizing adhesive matrix molecules promoting biofilm formation and increases antimicrobial tolerance In Vitro.

PubMed

Cardile, Anthony P; Sanchez, Carlos J; Samberg, Meghan E; Romano, Desiree R; Hardy, Sharanda K; Wenke, Joseph C; Murray, Clinton K; Akers, Kevin S

2014-07-17

Microbial biofilms have been associated with the development of chronic human infections and represent a clinical challenge given their increased antimicrobial tolerance. Staphylococcus aureus is a major human pathogen causing a diverse range of diseases, of which biofilms are often involved. Staphylococcal attachment and the formation of biofilms have been shown to be facilitated by host factors that accumulate on surfaces. To better understand how host factors enhance staphylococcal biofilm formation, we evaluated the effect of whole human plasma on biofilm formation in clinical isolates of S. aureus and the expression of seven microbial surface components recognizing adhesive matrix molecules (MSCRAMMs) known to be involved in biofilm formation by quantitative real-time PCR. We also evaluated whether plasma augmented changes in S. aureus biofilm morphology and antimicrobial resistance. Exposure of clinical isolates of S. aureus to human plasma (10%) within media, and to a lesser extent when coated onto plates, significantly enhanced biofilm formation in all of the clinical isolates tested. Compared to biofilms grown under non-supplemented conditions, plasma-augmented biofilms displayed significant changes in both the biofilm phenotype and cell morphology as determined by confocal scanning laser microscopy (CLSM) and scanning electron microscopy (SEM), respectively. Exposure of bacteria to plasma resulted in a significant fold-increase in MSCRAMM expression in both a time and isolate-dependent manner. Additionally, plasma-augmented biofilms displayed an increased tolerance to vancomycin compared to biofilms grown in non-supplemented media. Collectively, these studies support previous findings demonstrating a role for host factors in biofilm formation and provide further insight into how plasma, a preferred growth medium for staphylococcal biofilm formation enhances as well as augments other intrinsic properties of S. aureus biofilms. Consequently, these findings indicate that incorporation of host factors may be necessary to better replicate in vivo conditions and for the best utility of a clinical biofilm assay to evaluate the process of biofilm formation and treatments.

Pathologic Remodeling of Endoneurial Tubules in Human Neuromas.

PubMed

Karsy, Michael; Palmer, Cheryl A; Mahan, Mark A

2018-01-18

Laminins are extracellular matrix proteins that participate in endoneurial tubule formation and are important in the regeneration of nerves after injury. They act as scaffolds to guide nerves to distal targets and play a key role in neurite outgrowth. Because there is evidence that laminin architecture affects nerve regeneration, we evaluated endoneurial tubules by examining the laminin structure in clinical samples from patients with nerve injuries. In a retrospective review of eight nerve injury cases, we evaluated nerve histology in relation to clinical history and injury type. The immunohistochemical delineation of the laminin structure in relationship with the neuroma type was performed. Five cases of upper-trunk stretch injuries-four from childbirth injury and one from a motorcycle accident-and three cases of nerve laceration leading to neuroma formation were examined. In the upper-trunk stretch injuries, avulsed nerves demonstrated no neuroma formation with a linear laminin architecture and a regular Schwann cell arrangement, but increased fibrous tissue deposition. For neuromas-in-continuity after a stretch injury, laminin immunohistochemistry demonstrated a double-lumen laminin tubule, with encapsulation of the Schwann cells and axonal processes. Nerve laceration leading to stump neuroma formation had a similar double-lumen laminin tubule, but less severe fibrosis. In nerve injuries with regenerative capacity, endoneurial tubules become pathologically disorganized. A double-lumen endoneurial tubule of unclear significance develops. The consistency of this pattern potentially suggests a reproducible pathophysiologic process. Further exploration of this pathophysiologic healing may provide insight into the failure of programmed peripheral nerve regeneration after injury.

Using RUFDATA to guide a logic model for a quality assurance process in an undergraduate university program.

PubMed

Sherman, Paul David

2016-04-01

This article presents a framework to identify key mechanisms for developing a logic model blueprint that can be used for an impending comprehensive evaluation of an undergraduate degree program in a Canadian university. The evaluation is a requirement of a comprehensive quality assurance process mandated by the university. A modified RUFDATA (Saunders, 2000) evaluation model is applied as an initiating framework to assist in decision making to provide a guide for conceptualizing a logic model for the quality assurance process. This article will show how an educational evaluation is strengthened by employing a RUFDATA reflective process in exploring key elements of the evaluation process, and then translating this information into a logic model format that could serve to offer a more focussed pathway for the quality assurance activities. Using preliminary program evaluation data from two key stakeholders of the undergraduate program as well as an audit of the curriculum's course syllabi, a case is made for, (1) the importance of inclusivity of key stakeholders participation in the design of the evaluation process to enrich the authenticity and accuracy of program participants' feedback, and (2) the diversification of data collection methods to ensure that stakeholders' narrative feedback is given ample exposure. It is suggested that the modified RUFDATA/logic model framework be applied to all academic programs at the university undergoing the quality assurance process at the same time so that economies of scale may be realized. Copyright © 2015 Elsevier Ltd. All rights reserved.

Mechanisms of masked evaluative priming: task sets modulate behavioral and electrophysiological priming for picture and words differentially

PubMed Central

Liegel, Nathalie; Zovko, Monika; Wentura, Dirk

2017-01-01

Abstract Research with the evaluative priming paradigm has shown that affective evaluation processes reliably influence cognition and behavior, even when triggered outside awareness. However, the precise mechanisms underlying such subliminal evaluative priming effects, response activation vs semantic processing, are matter of a debate. In this study, we determined the relative contribution of semantic processing and response activation to masked evaluative priming with pictures and words. To this end, we investigated the modulation of masked pictorial vs verbal priming by previously activated perceptual vs semantic task sets and assessed the electrophysiological correlates of priming using event-related potential (ERP) recordings. Behavioral and electrophysiological effects showed a differential modulation of pictorial and verbal subliminal priming by previously activated task sets: Pictorial priming was only observed during the perceptual but not during the semantic task set. Verbal priming, in contrast, was found when either task set was activated. Furthermore, only verbal priming was associated with a modulation of the N400 ERP component, an index of semantic processing, whereas a priming-related modulation of earlier ERPs, indexing visuo-motor S-R activation, was found for both picture and words. The results thus demonstrate that different neuro-cognitive processes contribute to unconscious evaluative priming depending on the stimulus format. PMID:27998994

Reducing Physical Risk Factors in Construction Work Through a Participatory Intervention: Protocol for a Mixed-Methods Process Evaluation.

PubMed

Ajslev, Jeppe; Brandt, Mikkel; Møller, Jeppe Lykke; Skals, Sebastian; Vinstrup, Jonas; Jakobsen, Markus Due; Sundstrup, Emil; Madeleine, Pascal; Andersen, Lars Louis

2016-05-26

Previous research has shown that reducing physical workload among workers in the construction industry is complicated. In order to address this issue, we developed a process evaluation in a formative mixed-methods design, drawing on existing knowledge of the potential barriers for implementation. We present the design of a mixed-methods process evaluation of the organizational, social, and subjective practices that play roles in the intervention study, integrating technical measurements to detect excessive physical exertion measured with electromyography and accelerometers, video documentation of working tasks, and a 3-phased workshop program. The evaluation is designed in an adapted process evaluation framework, addressing recruitment, reach, fidelity, satisfaction, intervention delivery, intervention received, and context of the intervention companies. Observational studies, interviews, and questionnaires among 80 construction workers organized in 20 work gangs, as well as health and safety staff, contribute to the creation of knowledge about these phenomena. At the time of publication, the process of participant recruitment is underway. Intervention studies are challenging to conduct and evaluate in the construction industry, often because of narrow time frames and ever-changing contexts. The mixed-methods design presents opportunities for obtaining detailed knowledge of the practices intra-acting with the intervention, while offering the opportunity to customize parts of the intervention.

Computer-Based Reading Instruction for Young Children with Disabilities

ERIC Educational Resources Information Center

Lee, Yeunjoo; Vail, Cynthia O.

2005-01-01

This investigation examined the effectiveness of a computer program in teaching sight word recognition to four young children with developmental disabilities. The intervention program was developed through a formative evaluation process. It embedded a constant-time-delay procedure and involved sounds, video, text, and animations. Dependent…

Enhancing Teaching Excellence through a Scientist-Science Teacher Collaborative Process.

ERIC Educational Resources Information Center

Haakonsen, Harry; And Others

1993-01-01

The Institute for Science Instruction and Study (ISIS) at Southern Connecticut State University was established to place experienced science teachers in extended contact with a variety of research scientists working at the cutting edge of their fields. Reports program goals, format, requirements, and evaluation. (LZ)

Planning for the 80s and Beyond.

ERIC Educational Resources Information Center

De Anza Coll., Cupertino, CA.

Designed as a guide for policy formation, program development, and resource allocation, this report identifies and evaluates future trends and their implications for California's De Anza College (DAC). Section 1 contains introductory information on the purposes, processes, and components of institutional planning at DAC. Section 2 assesses the…

ASSESSMENT OF SYNAPSE FORMATION IN RAT PRIMARY NEURAL CELL CULTURE USING HIGH CONTENT MICROSCOPY.

EPA Science Inventory

Cell-based assays can model neurodevelopmental processes including neurite growth and synaptogenesis, and may be useful for screening and evaluation of large numbers of chemicals for developmental neurotoxicity. This work describes the use of high content screening (HCS) to dete...

An adaptive semantic based mediation system for data interoperability among Health Information Systems.

PubMed

Khan, Wajahat Ali; Khattak, Asad Masood; Hussain, Maqbool; Amin, Muhammad Bilal; Afzal, Muhammad; Nugent, Christopher; Lee, Sungyoung

2014-08-01

Heterogeneity in the management of the complex medical data, obstructs the attainment of data level interoperability among Health Information Systems (HIS). This diversity is dependent on the compliance of HISs with different healthcare standards. Its solution demands a mediation system for the accurate interpretation of data in different heterogeneous formats for achieving data interoperability. We propose an adaptive AdapteR Interoperability ENgine mediation system called ARIEN, that arbitrates between HISs compliant to different healthcare standards for accurate and seamless information exchange to achieve data interoperability. ARIEN stores the semantic mapping information between different standards in the Mediation Bridge Ontology (MBO) using ontology matching techniques. These mappings are provided by our System for Parallel Heterogeneity (SPHeRe) matching system and Personalized-Detailed Clinical Model (P-DCM) approach to guarantee accuracy of mappings. The realization of the effectiveness of the mappings stored in the MBO is evaluation of the accuracy in transformation process among different standard formats. We evaluated our proposed system with the transformation process of medical records between Clinical Document Architecture (CDA) and Virtual Medical Record (vMR) standards. The transformation process achieved over 90 % of accuracy level in conversion process between CDA and vMR standards using pattern oriented approach from the MBO. The proposed mediation system improves the overall communication process between HISs. It provides an accurate and seamless medical information exchange to ensure data interoperability and timely healthcare services to patients.

Development and evaluation of an interactive electronic laboratory manual for cooperative learning of medical histology.

PubMed

Khalil, Mohammed K; Kirkley, Debbie L; Kibble, Jonathan D

2013-01-01

This article describes the development of an interactive computer-based laboratory manual, created to facilitate the teaching and learning of medical histology. The overarching goal of developing the manual is to facilitate self-directed group interactivities that actively engage students during laboratory sessions. The design of the manual includes guided instruction for students to navigate virtual slides, exercises for students to monitor learning, and cases to provide clinical relevance. At the end of the laboratory activities, student groups can generate a laboratory report that may be used to provide formative feedback. The instructional value of the manual was evaluated by a questionnaire containing both closed-ended and open-ended items. Closed-ended items using a five-point Likert-scale assessed the format and navigation, instructional contents, group process, and learning process. Open-ended items assessed student's perception on the effectiveness of the manual in facilitating their learning. After implementation for two consecutive years, student evaluation of the manual was highly positive and indicated that it facilitated their learning by reinforcing and clarifying classroom sessions, improved their understanding, facilitated active and cooperative learning, and supported self-monitoring of their learning. Copyright © 2013 American Association of Anatomists.

Formation of carbon nanoclusters by implantation of keV carbon ions in fused silica followed by thermal annealing

NASA Astrophysics Data System (ADS)

Olivero, P.; Peng, J. L.; Liu, A.; Reichart, P.; McCallum, J. C.; Sze, J. Y.; Lau, S. P.; Tay, B. K.; Kalish, R.; Dhar, S.; Feldman, Leonard; Jamieson, David N.; Prawer, Steven

2005-02-01

In the last decade, the synthesis and characterization of nanometer sized carbon clusters have attracted growing interest within the scientific community. This is due to both scientific interest in the process of diamond nucleation and growth, and to the promising technological applications in nanoelectronics and quantum communications and computing. Our research group has demonstrated that MeV carbon ion implantation in fused silica followed by thermal annealing in the presence of hydrogen leads to the formation of nanocrystalline diamond, with cluster size ranging from 5 to 40 nm. In the present paper, we report the synthesis of carbon nanoclusters by the implantation into fused silica of keV carbon ions using the Plasma Immersion Ion Implantation (PIII) technique, followed by thermal annealing in forming gas (4% 2H in Ar). The present study is aimed at evaluating this implantation technique that has the advantage of allowing high fluence-rates on large substrates. The carbon nanostructures have been characterized with optical absorption and Raman spectroscopies, cross sectional Transmission Electron Microscopy (TEM), and Parallel Electron Energy Loss Spectroscopy (PEELS). Nuclear Reaction Analysis (NRA) has been employed to evaluate the deuterium incorporation during the annealing process, as a key mechanism to stabilize the formation of the clusters.

Portable hyperspectral fluorescence imaging system for detection of biofilms on stainless steel surfaces

NASA Astrophysics Data System (ADS)

Jun, Won; Lee, Kangjin; Millner, Patricia; Sharma, Manan; Chao, Kuanglin; Kim, Moon S.

2008-04-01

A rapid nondestructive technology is needed to detect bacterial contamination on the surfaces of food processing equipment to reduce public health risks. A portable hyperspectral fluorescence imaging system was used to evaluate potential detection of microbial biofilm on stainless steel typically used in the manufacture of food processing equipment. Stainless steel coupons were immersed in bacterium cultures, such as E. coli, Pseudomonas pertucinogena, Erwinia chrysanthemi, and Listeria innocula. Following a 1-week exposure, biofilm formations were assessed using fluorescence imaging. In addition, the effects on biofilm formation from both tryptic soy broth (TSB) and M9 medium with casamino acids (M9C) were examined. TSB grown cells enhance biofilm production compared with M9C-grown cells. Hyperspectral fluorescence images of the biofilm samples, in response to ultraviolet-A (320 to 400 nm) excitation, were acquired from approximately 416 to 700 nm. Visual evaluation of individual images at emission peak wavelengths in the blue revealed the most contrast between biofilms and stainless steel coupons. Two-band ratios compared with the single-band images increased the contrast between the biofilm forming area and stainless steel coupon surfaces. The 444/588 nm ratio images exhibited the greatest contrast between the biofilm formations and stainless coupon surfaces.

A formative evaluation of CU-SeeMe

NASA Astrophysics Data System (ADS)

Bibeau, Michael

1995-02-01

CU-SeeMe is a video conferencing software package that was designed and programmed at Cornell University. The program works with the TCP/IP network protocol and allows two or more parties to conduct a real-time video conference with full audio support. In this paper we evaluate CU-SeeMe through the process of Formative Evaluation. We first perform a Critical Review of the software using a subset of the Smith and Mosier Guidelines for Human-Computer Interaction. Next, we empirically review the software interface through a series of benchmark tests that are derived directly from a set of scenarios. The scenarios attempt to model real world situations that might be encountered by an individual in the target user class. Designing benchmark tasks becomes a natural and straightforward process when they are derived from the scenario set. Empirical measures are taken for each task, including completion times and error counts. These measures are accompanied by critical incident analysis 2 7 13 which serves to identify problems with the interface and the cognitive roots of those problems. The critical incidents reported by participants are accompanied by explanations of what caused the problem and why This helps in the process of formulating solutions for observed usability problems. All the testing results are combined in the Appendix in an illustrated partial redesign of the CU-SeeMe Interface.

Using case method to explicitly teach formative assessment in preservice teacher science education

NASA Astrophysics Data System (ADS)

Bentz, Amy Elizabeth

The process of formative assessment improves student understanding; however, the topic of formative assessment in preservice education has been severely neglected. Since a major goal of teacher education is to create reflective teaching professionals, preservice teachers should be provided an opportunity to critically reflect on the use of formative assessment in the classroom. Case method is an instructional methodology that allows learners to engage in and reflect on real-world situations. Case based pedagogy can play an important role in enhancing preservice teachers' ability to reflect on teaching and learning by encouraging alternative ways of thinking about assessment. Although the literature on formative assessment and case methodology are extensive, using case method to explore the formative assessment process is, at best, sparse. The purpose of this study is to answer the following research questions: To what extent does the implementation of formative assessment cases in methods instruction influence preservice elementary science teachers' knowledge of formative assessment? What descriptive characteristics change between the preservice teachers' pre-case and post-case written reflection that would demonstrate learning had occurred? To investigate these questions, preservice teachers in an elementary methods course were asked to reflect on and discuss five cases. Pre/post-case data was analyzed. Results indicate that the preservice teachers modified their ideas to reflect the themes that were represented within the cases and modified their reflections to include specific ideas or examples taken directly from the case discussions. Comparing pre- and post-case reflections, the data supports a noted change in how the preservice teachers interpreted the case content. The preservice teachers began to evaluate the case content, question the lack of formative assessment concepts and strategies within the case, and apply formative assessment concepts and strategies within their own case descriptions. The results of this study further strengthen the existing literature on formative assessment instruction in preservice teacher education, and support the call for further attention given to utilizing case methodology to improve preservice teachers' knowledge of the formative assessment process.

Evaluative Processing of Food Images: A Conditional Role for Viewing in Preference Formation

PubMed Central

Wolf, Alexandra; Ounjai, Kajornvut; Takahashi, Muneyoshi; Kobayashi, Shunsuke; Matsuda, Tetsuya; Lauwereyns, Johan

2018-01-01

Previous research suggested a role of gaze in preference formation, not merely as an expression of preference, but also as a causal influence. According to the gaze cascade hypothesis, the longer subjects look at an item, the more likely they are to develop a preference for it. However, to date the connection between viewing and liking has been investigated predominately with self-paced viewing conditions in which the subjects were required to select certain items from simultaneously presented stimuli on the basis of perceived visual attractiveness. Such conditions might promote a default, but non-mandatory connection between viewing and liking. To explore whether the connection is separable, we examined the evaluative processing of single naturalistic food images in a 2 × 2 design, conducted completely within subjects, in which we varied both the type of exposure (self-paced versus time-controlled) and the type of evaluation (non-exclusive versus exclusive). In the self-paced exclusive evaluation, longer viewing was associated with a higher likelihood of a positive evaluation. However, in the self-paced non-exclusive evaluation, the trend reversed such that longer viewing durations were associated with lesser ratings. Furthermore, in the time-controlled tasks, both with non-exclusive and exclusive evaluation, there was no significant relationship between the viewing duration and the evaluation. The overall pattern of results was consistent for viewing times measured in terms of exposure duration (i.e., the duration of stimulus presentation on the screen) and in terms of actual gaze duration (i.e., the amount of time the subject effectively gazed at the stimulus on the screen). The data indicated that viewing does not intrinsically lead to a higher evaluation when evaluating single food images; instead, the relationship between viewing duration and evaluation depends on the type of task. We suggest that self-determination of exposure duration may be a prerequisite for any influence from viewing time on evaluative processing, regardless of whether the influence is facilitative. Moreover, the purported facilitative link between viewing and liking appears to be limited to exclusive evaluation, when only a restricted number of items can be included in a chosen set. PMID:29942273

Evaluative Processing of Food Images: A Conditional Role for Viewing in Preference Formation.

PubMed

Wolf, Alexandra; Ounjai, Kajornvut; Takahashi, Muneyoshi; Kobayashi, Shunsuke; Matsuda, Tetsuya; Lauwereyns, Johan

2018-01-01

Previous research suggested a role of gaze in preference formation, not merely as an expression of preference, but also as a causal influence. According to the gaze cascade hypothesis, the longer subjects look at an item, the more likely they are to develop a preference for it. However, to date the connection between viewing and liking has been investigated predominately with self-paced viewing conditions in which the subjects were required to select certain items from simultaneously presented stimuli on the basis of perceived visual attractiveness. Such conditions might promote a default, but non-mandatory connection between viewing and liking. To explore whether the connection is separable, we examined the evaluative processing of single naturalistic food images in a 2 × 2 design, conducted completely within subjects, in which we varied both the type of exposure (self-paced versus time-controlled) and the type of evaluation (non-exclusive versus exclusive). In the self-paced exclusive evaluation, longer viewing was associated with a higher likelihood of a positive evaluation. However, in the self-paced non-exclusive evaluation, the trend reversed such that longer viewing durations were associated with lesser ratings. Furthermore, in the time-controlled tasks, both with non-exclusive and exclusive evaluation, there was no significant relationship between the viewing duration and the evaluation. The overall pattern of results was consistent for viewing times measured in terms of exposure duration (i.e., the duration of stimulus presentation on the screen) and in terms of actual gaze duration (i.e., the amount of time the subject effectively gazed at the stimulus on the screen). The data indicated that viewing does not intrinsically lead to a higher evaluation when evaluating single food images; instead, the relationship between viewing duration and evaluation depends on the type of task. We suggest that self-determination of exposure duration may be a prerequisite for any influence from viewing time on evaluative processing, regardless of whether the influence is facilitative. Moreover, the purported facilitative link between viewing and liking appears to be limited to exclusive evaluation, when only a restricted number of items can be included in a chosen set.

Considerations of the Differences between Bedded and Domal Salt Pertaining to Disposal of Heat-Generating Nuclear Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Francis D.; Kuhlman, Kristopher L.; Sobolik, Steven R.

Salt formations hold promise for eternal removal of nuclear waste from our biosphere. Germany and the United States have ample salt formations for this purpose, ranging from flat-bedded formations to geologically mature dome structures. As both nations revisit nuclear waste disposal options, the choice between bedded, domal, or intermediate pillow formations is once again a contemporary issue. For decades, favorable attributes of salt as a disposal medium have been extoled and evaluated, carefully and thoroughly. Yet, a sense of discovery continues as science and engineering interrogate naturally heterogeneous systems. Salt formations are impermeable to fluids. Excavation-induced fractures heal as sealmore » systems are placed or natural closure progresses toward equilibrium. Engineering required for nuclear waste disposal gains from mining and storage industries, as humans have been mining salt for millennia. This great intellectual warehouse has been honed and distilled, but not perfected, for all nuances of nuclear waste disposal. Nonetheless, nations are able and have already produced suitable license applications for radioactive waste disposal in salt. A remaining conundrum is site location. Salt formations provide isolation and geotechnical barriers reestablish impermeability after waste is placed in the geology. Between excavation and closure, physical, mechanical, thermal, chemical, and hydrological processes ensue. Positive attributes for isolation in salt have many commonalities independent of the geologic setting. In some cases, specific details of the environment will affect the disposal concept and thereby define interaction of features, events and processes, while simultaneously influencing scenario development. Here we identify and discuss high-level differences and similarities of bedded and domal salt formations. Positive geologic and engineering attributes for disposal purposes are more common among salt formations than are significant differences. Developing models, testing material, characterizing processes, and analyzing performance all have overlapping application regardless of the salt formation of interest.« less

Considerations of the Differences between Bedded and Domal Salt Pertaining to Disposal of Heat-Generating Nuclear Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Francis D.; Kuhlman, Kristopher L.; Sobolik, Steven R.

Salt formations hold promise for eternal removal of nuclear waste from our biosphere. Germany and the United States have ample salt formations for this purpose, ranging from flat-bedded formations to geologically mature dome structures. As both nations revisit nuclear waste disposal options, the choice between bedded, domal, or intermediate pillow formations is once again a contemporary issue. For decades, favorable attributes of salt as a disposal medium have been extoled and evaluated, carefully and thoroughly. Yet, a sense of discovery continues as science and engineering interrogate naturally heterogeneous systems. Salt formations are impermeable to fluids. Excavation-induced fractures heal as sealmore » systems are placed or natural closure progresses toward equilibrium. Engineering required for nuclear waste disposal gains from mining and storage industries, as humans have been mining salt for millennia. This great intellectual warehouse has been honed and distilled, but not perfected, for all nuances of nuclear waste disposal. Nonetheless, nations are able and have already produced suitable license applications for radioactive waste disposal in salt. A remaining conundrum is site location. Salt formations provide isolation, and geotechnical barriers reestablish impermeability after waste is placed in the geology. Between excavation and closure, physical, mechanical, thermal, chemical, and hydrological processes ensue. Positive attributes for isolation in salt have many commonalities independent of the geologic setting. In some cases, specific details of the environment will affect the disposal concept and thereby define interaction of features, events and processes, while simultaneously influencing scenario development. Here we identify and discuss high-level differences and similarities of bedded and domal salt formations. Positive geologic and engineering attributes for disposal purposes are more common among salt formations than are significant differences. Developing models, testing material, characterizing processes, and analyzing performance all have overlapping application regardless of the salt formation of interest.« less

Clinical and Radiographic Evaluation of Procedural Errors during Preparation of Curved Root Canals with Hand and Rotary Instruments: A Randomized Clinical Study.

PubMed

Khanna, Rajesh; Handa, Aashish; Virk, Rupam Kaur; Ghai, Deepika; Handa, Rajni Sharma; Goel, Asim

2017-01-01

The process of cleaning and shaping the canal is not an easy goal to obtain, as canal curvature played a significant role during the instrumentation of the curved canals. The present in vivo study was conducted to evaluate procedural errors during the preparation of curved root canals using hand Nitiflex and rotary K3XF instruments. Procedural errors such as ledge formation, instrument separation, and perforation (apical, furcal, strip) were determined in sixty patients, divided into two groups. In Group I, thirty teeth in thirty patients were prepared using hand Nitiflex system, and in Group II, thirty teeth in thirty patients were prepared using K3XF rotary system. The evaluation was done clinically as well as radiographically. The results recorded from both groups were compiled and put to statistical analysis. Chi-square test was used to compare the procedural errors (instrument separation, ledge formation, and perforation). In the present study, both hand Nitiflex and rotary K3XF showed ledge formation and instrument separation. Although ledge formation and instrument separation by rotary K3XF file system was less as compared to hand Nitiflex. No perforation was seen in both the instrument groups. Canal curvature played a significant role during the instrumentation of the curved canals. Procedural errors such as ledge formation and instrument separation by rotary K3XF file system were less as compared to hand Nitiflex.

Clinical and Radiographic Evaluation of Procedural Errors during Preparation of Curved Root Canals with Hand and Rotary Instruments: A Randomized Clinical Study

PubMed Central

Khanna, Rajesh; Handa, Aashish; Virk, Rupam Kaur; Ghai, Deepika; Handa, Rajni Sharma; Goel, Asim

2017-01-01

Background: The process of cleaning and shaping the canal is not an easy goal to obtain, as canal curvature played a significant role during the instrumentation of the curved canals. Aim: The present in vivo study was conducted to evaluate procedural errors during the preparation of curved root canals using hand Nitiflex and rotary K3XF instruments. Materials and Methods: Procedural errors such as ledge formation, instrument separation, and perforation (apical, furcal, strip) were determined in sixty patients, divided into two groups. In Group I, thirty teeth in thirty patients were prepared using hand Nitiflex system, and in Group II, thirty teeth in thirty patients were prepared using K3XF rotary system. The evaluation was done clinically as well as radiographically. The results recorded from both groups were compiled and put to statistical analysis. Statistical Analysis: Chi-square test was used to compare the procedural errors (instrument separation, ledge formation, and perforation). Results: In the present study, both hand Nitiflex and rotary K3XF showed ledge formation and instrument separation. Although ledge formation and instrument separation by rotary K3XF file system was less as compared to hand Nitiflex. No perforation was seen in both the instrument groups. Conclusion: Canal curvature played a significant role during the instrumentation of the curved canals. Procedural errors such as ledge formation and instrument separation by rotary K3XF file system were less as compared to hand Nitiflex. PMID:29042727

Formative and Summative Evaluation: Related Issues in Performance Measurement.

ERIC Educational Resources Information Center

Wholey, Joseph S.

1996-01-01

Performance measurement can serve both formative and summative evaluation functions. Formative evaluation is typically more useful for government purposes whereas performance measurement is more useful than one-shot evaluations of either formative or summative nature. Evaluators should study performance measurement through case studies and…

Evaluated nuclear data files for the naturally-occurring isotopes of cadmium

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCabe, J.; Smith, A.B.; Meadows, J.W.

1993-06-01

Comprehensive neutronic evaluated data files for the naturally-occurring isotopes of cadmium are deduced from experimental data and nuclear models, and presented in the ENDF/B-VI formats. Particular attention is given to those processes relevant to fuel-cycle and fission-product applications. Comparisons are made with prior evaluations of the cadmium isotopes, and discrepancies and consistencies cited. Some of the discrepancies are very large 9.9 as much as 100%), and the differences have the potential for a pronounced impact on applications usage. The present files are comprehensive, including may important processes that are not represented in the contemporary ENDF/B-VI system. Recommendations are made formore » future measurements where appropriate.« less

Jump start: a targeted substance abuse prevention program.

PubMed

Harrington, N G; Donohew, L

1997-10-01

A substance abuse prevention and life skills program for economically disadvantaged, high sensation seeking African American teens was developed and tested in Cincinnati, Ohio. Formative research was conducted to determine program content and format. Over two implementations, 289 individuals in the target population were recruited as participants for the field test of the program. For the first implementation, participants were randomly selected from the city's summer youth employment program. For the second, a media campaign was designed to recruit participants. Process evaluation indicated that participants evaluated the program extremely positively. Outcome evaluation indicated that significant pretest differences between high and low sensation seekers were neutralized for liquor and marijuana in both years of the program and for attitude toward drugs in the first year of the program. These results suggest that sensation seeking is a useful message design and audience-targeting variable for substance abuse prevention program design. Implications and recommendations for future research are discussed.

Technical and economical evaluation of water recycling in the carwash industry with membrane processes.

PubMed

Boussu, K; Eelen, D; Vanassche, S; Vandecasteele, C; Van der Bruggen, B; Van Baelen, G; Colen, W; Vanassche, S

2008-01-01

In the carwash industry, water recycling is necessary to be in accordance with present and upcoming environmental laws. As this is not possible with traditional techniques, membrane processes (like ultrafiltration (UF) and nanofiltration (NF)) are technically and economically evaluated in this study. Concerning the technical part, there needs to be a compromise between a high permeate permeability on the one hand and a high permeate purity on the other hand. Depending on the use of the purified wastewater, ultrafiltration (to recycle wastewater in the main wash cycle) or nanofiltration (to recycle wastewater in the rinsing step) would be the optimal choice. Concerning the financial part, the implementation of membrane processes in the wastewater purification installation is economically feasible, especially when expensive tap water is used as pure water. These positive evaluations imply that membrane processes can be useful to recycle wastewater in the carwash industry, on condition that the right membrane type (with the least membrane fouling) and the right process format (e.g., hybrid process of UF and/or NF with a biological treatment) is selected. Copyright IWA Publishing 2008.

On the electrophilic character of molecules through its relation with electronegativity and chemical hardness.

PubMed

Islam, Nazmul; Ghosh, Dulal C

2012-01-01

Electrophilicity is an intrinsic property of atoms and molecules. It probably originates logistically with the involvement in the physical process of electrostatics of soaked charge in electronic shells and the screened nuclear charge of atoms. Motivated by the existing view of conceptual density functional theory that similar to electronegativity and hardness equalization, there should be a physical process of equalization of electrophilicity during the chemical process of formation of hetero nuclear molecules, we have developed a new theoretical scheme and formula for evaluating the electrophilicity of hetero nuclear molecules. A comparative study with available bench marking reveals that the hypothesis of electrophilicity and equalization, and the present method of evaluating equalized electrophilicity, are scientifically promising.

On the Electrophilic Character of Molecules Through Its Relation with Electronegativity and Chemical Hardness

PubMed Central

Islam, Nazmul; Ghosh, Dulal C.

2012-01-01

Electrophilicity is an intrinsic property of atoms and molecules. It probably originates logistically with the involvement in the physical process of electrostatics of soaked charge in electronic shells and the screened nuclear charge of atoms. Motivated by the existing view of conceptual density functional theory that similar to electronegativity and hardness equalization, there should be a physical process of equalization of electrophilicity during the chemical process of formation of hetero nuclear molecules, we have developed a new theoretical scheme and formula for evaluating the electrophilicity of hetero nuclear molecules. A comparative study with available bench marking reveals that the hypothesis of electrophilicity and equalization, and the present method of evaluating equalized electrophilicity, are scientifically promising. PMID:22408445

An Adaptive Reputation-Based Algorithm for Grid Virtual Organization Formation

NASA Astrophysics Data System (ADS)

Cui, Yongrui; Li, Mingchu; Ren, Yizhi; Sakurai, Kouichi

A novel adaptive reputation-based virtual organization formation is proposed. It restrains the bad performers effectively based on the consideration of the global experience of the evaluator and evaluates the direct trust relation between two grid nodes accurately by consulting the previous trust value rationally. It also consults and improves the reputation evaluation process in PathTrust model by taking account of the inter-organizational trust relationship and combines it with direct and recommended trust in a weighted way, which makes the algorithm more robust against collusion attacks. Additionally, the proposed algorithm considers the perspective of the VO creator and takes required VO services as one of the most important fine-grained evaluation criterion, which makes the algorithm more suitable for constructing VOs in grid environments that include autonomous organizations. Simulation results show that our algorithm restrains the bad performers and resists against fake transaction attacks and badmouth attacks effectively. It provides a clear advantage in the design of a VO infrastructure.

A numerical study of zone-melting process for the thermoelectric material of Bi2Te3

NASA Astrophysics Data System (ADS)

Chen, W. C.; Wu, Y. C.; Hwang, W. S.; Hsieh, H. L.; Huang, J. Y.; Huang, T. K.

2015-06-01

In this study, a numerical model has been established by employing a commercial software; ProCAST, to simulate the variation/distribution of temperature and the subsequent microstructure of Bi2Te3 fabricated by zone-melting technique. Then an experiment is conducted to measure the temperature variation/distribution during the zone-melting process to validate the numerical system. Also, the effects of processing parameters on crystallization microstructure such as moving speed and temperature of heater are numerically evaluated. In the experiment, the Bi2Te3 powder are filled into a 30mm diameter quartz cylinder and the heater is set to 800°C with a moving speed 12.5 mm/hr. A thermocouple is inserted in the Bi2Te3 powder to measure the temperature variation/distribution of the zone-melting process. The temperature variation/distribution measured by experiment is compared to the results of numerical simulation. The results show that our model and the experiment are well matched. Then the model is used to evaluate the crystal formation for Bi2Te3 with a 30mm diameter process. It's found that when the moving speed is slower than 17.5 mm/hr, columnar crystal is obtained. In the end, we use this model to predict the crystal formation of zone-melting process for Bi2Te3 with a 45 mm diameter. The results show that it is difficult to grow columnar crystal when the diameter comes to 45mm.

Image correlation nondestructive evaluation of impact damage in a glass fiber composite

NASA Technical Reports Server (NTRS)

Russell, Samuel S.

1990-01-01

Presented in viewgraph format, digital image correlation, damage in fibrous composites, and damaged coupons (cross-ply scotchply GI-Ep laminate) are outlined. It was concluded that the image correlation accuracy was 0.03 percent; strains can be processed through Tsai-Hill failure criteria to qualify the damage; the statistical data base must be generated to evaluate certainty of the damage estimate; size effects need consideration; and better numerical techniques are needed.

Undergraduate medical education programme renewal: a longitudinal context, input, process and product evaluation study.

PubMed

Mirzazadeh, Azim; Gandomkar, Roghayeh; Hejri, Sara Mortaz; Hassanzadeh, Gholamreza; Koochak, Hamid Emadi; Golestani, Abolfazl; Jafarian, Ali; Jalili, Mohammad; Nayeri, Fatemeh; Saleh, Narges; Shahi, Farhad; Razavi, Seyed Hasan Emami

2016-02-01

The purpose of this study was to utilize the Context, Input, Process and Product (CIPP) evaluation model as a comprehensive framework to guide initiating, planning, implementing and evaluating a revised undergraduate medical education programme. The eight-year longitudinal evaluation study consisted of four phases compatible with the four components of the CIPP model. In the first phase, we explored the strengths and weaknesses of the traditional programme as well as contextual needs, assets, and resources. For the second phase, we proposed a model for the programme considering contextual features. During the process phase, we provided formative information for revisions and adjustments. Finally, in the fourth phase, we evaluated the outcomes of the new undergraduate medical education programme in the basic sciences phase. Information was collected from different sources such as medical students, faculty members, administrators, and graduates, using various qualitative and quantitative methods including focus groups, questionnaires, and performance measures. The CIPP model has the potential to guide policy makers to systematically collect evaluation data and to manage stakeholders' reactions at each stage of the reform in order to make informed decisions. However, the model may result in evaluation burden and fail to address some unplanned evaluation questions.

Insights into Students' Conceptual Understanding Using Textual Analysis: A Case Study in Signal Processing

ERIC Educational Resources Information Center

Goncher, Andrea M.; Jayalath, Dhammika; Boles, Wageeh

2016-01-01

Concept inventory tests are one method to evaluate conceptual understanding and identify possible misconceptions. The multiple-choice question format, offering a choice between a correct selection and common misconceptions, can provide an assessment of students' conceptual understanding in various dimensions. Misconceptions of some engineering…

Not Playing the Game: Student Assessment Resistance as a Form of Agency

ERIC Educational Resources Information Center

Harris, Lois R.; Brown, Gavin T. L.; Dargusch, Joanne

2018-01-01

Within self-regulated learning, learners exercise agency by setting targets, formatively monitoring progress, and evaluating results in ways which inform their own goal attainment. However, in real-world classroom situations, assessment processes can elicit behaviours that are more ego-protective than growth-oriented. Resistance to teacher…

Bicultural Team Teaching: Experiences from an Emerging Business School.

ERIC Educational Resources Information Center

Napier, Nancy K.; Hang, Ngo Minh; Mai, Nyugen Thi Tuyet; Thang, Nyugen Van; Tuan, Vu Van

2002-01-01

A new graduate business course in Vietnam team taught by American and Vietnamese instructors illustrates issues in bicultural team teaching, including team formation, sharing workloads in and out of class, and evaluation/grading. The process made the class more relevant, exposed students to multiple perspectives, and helped participants appreciate…

36 CFR 290.3 - Nomination, evaluation, and designation of significant caves.

Code of Federal Regulations, 2012 CFR

2012-07-01

... governmental agencies and the public, including those who utilize caves for scientific, educational, or... is located as new cave discoveries are made. Caves nominated but not approved for designation may be... mineralogic features that are fragile, represent formation processes that are of scientific interest, or that...

36 CFR 290.3 - Nomination, evaluation, and designation of significant caves.

Code of Federal Regulations, 2013 CFR

2013-07-01

... governmental agencies and the public, including those who utilize caves for scientific, educational, or... is located as new cave discoveries are made. Caves nominated but not approved for designation may be... mineralogic features that are fragile, represent formation processes that are of scientific interest, or that...

36 CFR 290.3 - Nomination, evaluation, and designation of significant caves.

Code of Federal Regulations, 2014 CFR

2014-07-01

... governmental agencies and the public, including those who utilize caves for scientific, educational, or... is located as new cave discoveries are made. Caves nominated but not approved for designation may be... mineralogic features that are fragile, represent formation processes that are of scientific interest, or that...

36 CFR 290.3 - Nomination, evaluation, and designation of significant caves.

Code of Federal Regulations, 2011 CFR

2011-07-01

... governmental agencies and the public, including those who utilize caves for scientific, educational, or... is located as new cave discoveries are made. Caves nominated but not approved for designation may be... mineralogic features that are fragile, represent formation processes that are of scientific interest, or that...

An Assessment of an Oral Examination Format for Evaluating Clinical Competence in Emergency Medicine.

ERIC Educational Resources Information Center

Solomon, David J.; And Others

1990-01-01

In July 1989 the American Board of Emergency Medicine conducted a field test of the oral recertification examination process. Sixteen examiners and 25 examinees participated in the field test. The examination included 3 chart-stimulated recall and 3 simulated-patient encounter cases. (MLW)

OBSERVATIONS ON THE EFFECT OF PROCESS PARAMETERS ON DIOXIN/FURAN YIELD IN MUNICIPAL WASTE AND COAL SYSTEMS

EPA Science Inventory

Effects of fly ash loading; ash-borne, extractable organics; sulfur dioxide (SO2) and hydrogen chloride concentration; and combustion quality on the formation of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) were evaluated in pilot scale tests simu...

Production data in media systems and press front ends: capture, formats and database methods

NASA Astrophysics Data System (ADS)

Karttunen, Simo

1997-02-01

The nature, purpose and data presentation features of media jobs are analyzed in relation to the content, document, process and resource management in media production. Formats are the natural way of presenting, collecting and storing information, contents, document components and final documents. The state of the art and the trends in the media formats and production data are reviewed. The types and the amount of production data are listed, e.g. events, schedules, product descriptions, reports, visual support, quality, process states and color data. The data exchange must be vendor-neutral. Adequate infrastructure and system architecture are defined for production and media data. The roles of open servers and intranets are evaluated and their potential roles as future solutions are anticipated. The press frontend is the part of print media production where large files dominate. The new output alternatives, i.e. film recorders, direct plate output (CTP and CTP-on-press) and digital, plateless printing lines need new workflow tools and very efficient file and format management. The paper analyzes the capture, formatting and storing of job files and respective production data, such as the event logs of the processes. Intranet, browsers, Java applets and open web severs will be used to capture production data, especially where intranets are used anyhow, or where several companies are networked to plan, design and use documents and printed products. The user aspects of installing intranets is stressed since there are numerous more traditional and more dedicated networking solutions on the market.

Assessing the Subsequent Effect of a Formative Evaluation on a Program.

ERIC Educational Resources Information Center

Brown, J. Lynne; Kiernan, Nancy Ellen

2001-01-01

Conducted a formative evaluation of an osteoporosis prevention health education program using several methods, including questionnaires completed by 256 women, and then compared formative evaluation results to those of a summative evaluation focusing on the same target group. Results show the usefulness of formative evaluation for strengthening…

Progress on China nuclear data processing code system

NASA Astrophysics Data System (ADS)

Liu, Ping; Wu, Xiaofei; Ge, Zhigang; Li, Songyang; Wu, Haicheng; Wen, Lili; Wang, Wenming; Zhang, Huanyu

2017-09-01

China is developing the nuclear data processing code Ruler, which can be used for producing multi-group cross sections and related quantities from evaluated nuclear data in the ENDF format [1]. The Ruler includes modules for reconstructing cross sections in all energy range, generating Doppler-broadened cross sections for given temperature, producing effective self-shielded cross sections in unresolved energy range, calculating scattering cross sections in thermal energy range, generating group cross sections and matrices, preparing WIMS-D format data files for the reactor physics code WIMS-D [2]. Programming language of the Ruler is Fortran-90. The Ruler is tested for 32-bit computers with Windows-XP and Linux operating systems. The verification of Ruler has been performed by comparison with calculation results obtained by the NJOY99 [3] processing code. The validation of Ruler has been performed by using WIMSD5B code.

Development of Al-Al3Ni Nanocomposite by Duplex Processing of Flame Spray and Friction Stir Processing, and Evaluation of Its Properties

NASA Astrophysics Data System (ADS)

Adel Mehraban, F.; Karimzadeh, F.; Abbasi, M. H.

2017-10-01

In this study, Al-Al3Ni nanocomposite was fabricated by friction stir processing (FSP) of a nickel-deposited Al6061-T6 plate. X-ray diffraction results showed that Al3Ni phase was formed because of an in situ reaction between the preplaced nickel and aluminum substrate. To predict the first phase formed during FSP, effective heat of formation (EHF) thermodynamic model was applied, and the results were in agreement with experimental data. The presence of facet nanoparticles in transmission electron microscopy micrographs of the stir zone (SZ) confirmed the formation of Al3Ni nano-reinforcements. Although microhardness and ultimate tensile strength in the SZ of nanocomposite degraded because of precipitates dissolution in Al6061-T6 during FSP, it showed improved tribological behavior at elevated temperatures.

Freeze-thaw durability of concrete: Ice formation process in pores

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, H.; Liu, X.

1998-09-01

Freeze-thaw durability of concrete is of great importance to hydraulic structures in cold areas. Study of ice formation process in concrete pores is necessary to evaluate the damages in concrete caused by freezing. In this paper, freezing of pore solution in concrete exposed to a freeze-thaw cycle is studied by following the change of concrete electrical conductivity with freezing temperatures. Concretes were subjected to freeze-thaw cycles with temperature varying between {minus}0 C and {minus}20 C. In the freezing process, the changing rate of concrete electrical conductivity obviously decreases at about {minus}10 C, indicating that more pore solution in concrete freezesmore » above {minus}10 C than below {minus}10C. According to Powers` static hydraulic pressure hypothesis, it is thought that frost damage mainly occurs between 0 C and {minus}100 C. To ordinary concrete, frost damages below {minus}10 C are negligible.« less

Keeping a Step Ahead: formative phase of a workplace intervention trial to prevent obesity.

PubMed

Zapka, Jane; Lemon, Stephenie C; Estabrook, Barbara B; Jolicoeur, Denise G

2007-11-01

Ecological interventions hold promise for promoting overweight and obesity prevention in worksites. Given the paucity of evaluative research in the hospital worksite setting, considerable formative work is required for successful implementation and evaluation. This paper describes the formative phases of Step Ahead, a site-randomized controlled trial of a multilevel intervention that promotes physical activity and healthy eating in six hospitals in central Massachusetts. The purpose of the formative research phase was to increase the feasibility, effectiveness, and likelihood of sustainability of the intervention. The Step Ahead ecological intervention approach targets change at the organization, interpersonal work environment, and individual levels. The intervention was developed using fundamental steps of intervention mapping and important tenets of participatory research. Formative research methods were used to engage leadership support and assistance and to develop an intervention plan that is both theoretically and practically grounded. This report uses observational data, program minutes and reports, and process tracking data. Leadership involvement (key informant interviews and advisory boards), employee focus groups and advisory boards, and quantitative environmental assessments cultivated participation and support. Determining multiple foci of change and designing measurable objectives and generic assessment tools to document progress are complex challenges encountered in planning phases. Multilevel trials in diverse organizations require flexibility and balance of theory application and practice-based perspectives to affect impact and outcome objectives. Formative research is an essential component.

Cloud processing of organic compounds: Secondary organic aerosol and nitrosamine formation

NASA Astrophysics Data System (ADS)

Hutchings, James W., III

Cloud processing of atmospheric organic compounds has been investigated through field studies, laboratory experiments, and numerical modeling. Observational cloud chemistry studies were performed in northern Arizona and fog studies in central Pennsylvania. At both locations, the cloud and fogs showed low acidity due to neutralization by soil dust components (Arizona) and ammonia (Pennsylvania). The field observations showed substantial concentrations (20-5500 ng•L -1) of volatile organic compounds (VOC) in the cloud droplets. The potential generation of secondary organic aerosol mass through the processing of these anthropogenic VOCs was investigated through laboratory and modeling studies. Under simulated atmospheric conditions, in idealized solutions, benzene, toluene, ethylbenzene, and xylene (BTEX) degraded quickly in the aqueous phase with half lives of approximately three hours. The degradation process yielded less volatile products which would contribute to new aerosol mass upon cloud evaporation. However, when realistic cloud solutions containing natural organic matter were used in the experiments, the reaction kinetics decreased with increasing organic carbon content, resulting in half lives of approximately 7 hours. The secondary organic aerosol (SUA) mass formation potential of cloud processing of BTEX was evaluated. SOA mass formation by cloud processing of BTEX, while strongly dependent on the atmospheric conditions, could contribute up to 9% of the ambient atmospheric aerosol mass, although typically ˜1% appears realistic. Field observations also showed the occurrence of N-nitrosodimethylamine (NDMA), a potent carcinogen, in fogs and clouds (100-340 ng•L -1). Laboratory studies were conducted to investigate the formation of NDMA from nitrous acid and dimethylamine in the homogeneous aqueous phase within cloud droplets. While NDMA was produced in the cloud droplets, the low yields (<1%) observed could not explain observational concentrations. Therefore heterogeneous or gaseous formation of NDMA with partitioning to droplet must be the source of aqueous NDMA. Box-model calculations tended to demonstrate a predominance of a gas phase formation mechanism followed by partitioning into the cloud droplets. The calculations were consistent with field measurements of gaseous and aqueous NDMA concentrations. Measurements and model calculations showed that while NDMA is eventually photolyzed, it might persist in the atmosphere for hours.

Evaluation of an interview process for admission into a school of pharmacy.

PubMed

Kelsch, Michael P; Friesner, Daniel L

2012-03-12

To evaluate the doctor of pharmacy (PharmD) admissions interview process at North Dakota State University (NDSU). Faculty pairs interviewed candidates using a standardized grading rubric to evaluate qualitative parameters or attributes such as ethics, relevant life and work experience, emotional maturity, commitment to patient care, leadership, and understanding of the pharmacy profession. Total interview scores, individual attribute domain scores, and the consistency and reliability of the interviewers were assessed. The total mean interview score for the candidate pool was 17.4 of 25 points. Mean scores for individual domains ranged from 2.3 to 3.0 on a Likert-scale of 0-4. Nine of the 11 faculty pairs showed no mean differences from their interview partner in total interview scores given. Evaluations by 8 of the 11 faculty pairs produced high interrater reliability. The current interview process is generally consistent and reliable; however, future improvements such as additional interviewer training and adoption of a multiple mini-interview format could be made.

Evaluation of an Interview Process for Admission Into a School of Pharmacy

PubMed Central

Friesner, Daniel L.

2012-01-01

Objective. To evaluate the doctor of pharmacy (PharmD) admissions interview process at North Dakota State University (NDSU). Methods. Faculty pairs interviewed candidates using a standardized grading rubric to evaluate qualitative parameters or attributes such as ethics, relevant life and work experience, emotional maturity, commitment to patient care, leadership, and understanding of the pharmacy profession. Total interview scores, individual attribute domain scores, and the consistency and reliability of the interviewers were assessed. Results. The total mean interview score for the candidate pool was 17.4 of 25 points. Mean scores for individual domains ranged from 2.3 to 3.0 on a Likert-scale of 0-4. Nine of the 11 faculty pairs showed no mean differences from their interview partner in total interview scores given. Evaluations by 8 of the 11 faculty pairs produced high interrater reliability. Conclusions. The current interview process is generally consistent and reliable; however, future improvements such as additional interviewer training and adoption of a multiple mini-interview format could be made. PMID:22438594

Release of the ENDF/B-VII.1 Evaluated Nuclear Data File

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, David

2012-06-30

The Cross Section Evaluation Working Group (CSEWG) released the ENDF/B-VII.1 library on December 22, 2011. The ENDF/B-VII.1 library is CSEWG's latest recommended evaluated nuclear data file for use in nuclear science and technology applications, and incorporates advances made in the five years since the release of ENDF/B-VII.0, including: many new evaluation in the neutron sublibrary (423 in all and over 190 of these contain covariances), new fission product yields and a greatly improved decay data sublibrary. This summary barely touches on the five years worth of advances present in the ENDF/B-VII.1 library. We expect that these changes will lead tomore » improved integral performance in reactors and other applications. Furthermore, the expansion of covariance data in this release will allow for better uncertainty quantification, reducing design margins and costs. The ENDF library is an ongoing and evolving effort. Currently, the ENDF data community embarking on several parallel efforts to improve library management: (1) The adoption of a continuous integration system to provide evaluators 'instant' feedback on the quality of their evaluations and to provide data users with working 'beta' quality libraries in between major releases. (2) The transition to new hierarchical data format - the Generalized Nuclear Data (GND) format. We expect GND to enable new kinds of evaluated data which cannot be accommodated in the legacy ENDF format. (3) The development of data assimilation and uncertainty propagation techniques to enable the consistent use of integral experimental data in the evaluation process.« less

Pilot test of cooperative learning format for training mental health researchers and black community leaders in partnership skills.

PubMed

Laborde, Danielle J; Brannock, Kristen; Breland-Noble, Alfiee; Parrish, Theodore

2007-12-01

To support reduction of racial disparities in mental health diagnosis and treatment, mental health researchers and black community-based organization (CBO) leaders need training on how to engage in collaborative research partnerships. In this study, we pilot tested a series of partnership skills training modules for researchers and CBO leaders in a collaborative learning format. Two different sets of three modules, designed for separate training of researchers and CBO leaders, covered considering, establishing and managing mental health research partnerships and included instructions for self-directed activities and discussions. Eight CBO leaders participated in 10 sessions, and six researchers participated in eight sessions. The effectiveness of the training content and format was evaluated through standardized observations, focus group discussions, participant evaluation forms and retrospective pre-/posttests to measure perceived gains in knowledge. Participants generally were satisfied with the training experience and gained new partnership knowledge and skills. Although the CBO leaders were more engaged in the cooperative learning process, this training format appealed to both audiences. Pilot testing demonstrated that: 1) our modules can equip researchers and CBO leaders with new partnership knowledge and skills and 2) the cooperative learning format is a well-received and suitable option for mental health research partnership training.

Experimental Simulations to Understand the Lunar and Martian Surficial Processes

NASA Astrophysics Data System (ADS)

Zhao, Y. Y. S.; Li, X.; Tang, H.; Li, Y.; Zeng, X.; Chang, R.; Li, S.; Zhang, S.; Jin, H.; Mo, B.; Li, R.; Yu, W.; Wang, S.

2016-12-01

In support with China's Lunar and Mars exploration programs and beyond, our center is dedicated to understand the surficial processes and environments of planetary bodies. Over the latest several years, we design, build and optimize experimental simulation facilities and utilize them to test hypotheses and evaluate affecting mechanisms under controlled conditions particularly relevant to the Moon and Mars. Among the fundamental questions to address, we emphasize on five major areas: (1) Micrometeorites bombardment simulation to evaluate the formation mechanisms of np-Fe0 which was found in lunar samples and the possible sources of Fe. (2) Solar wind implantation simulation to evaluate the alteration/amorphization/OH or H2O formation on the surface of target minerals or rocks. (3) Dusts mobility characteristics on the Moon and other planetary bodies by excitation different types of dust particles and measuring their movements. (4) Mars basaltic soil simulant development (e.g., Jining Martian Soil Simulant (JMSS-1)) and applications for scientific/engineering experiments. (5) Halogens (Cl and Br) and life essential elements (C, H, O, N, P, and S) distribution and speciation on Mars during surficial processes such as sedimentary- and photochemical- related processes. Depending on the variables of interest, the simulation systems provide flexibility to vary source of energy, temperature, pressure, and ambient gas composition in the reaction chambers. Also, simulation products can be observed or analyzed in-situ by various analyzer components inside the chamber, without interrupting the experimental conditions. In addition, behavior of elements and isotopes during certain surficial processes (e.g., evaporation, dissolution, etc.) can be theoretically predicted by our theoretical geochemistry group with thermodynamics-kinetics calculation and modeling, which supports experiment design and result interpretation.

Understanding Gully Formation and Seasonal Flows on Recent and Current Mars

NASA Astrophysics Data System (ADS)

Gulick, Virginia C.; Glines, Natalie

2016-10-01

The discoveries of gullies and seasonal slope flows (RSL) have re-ignited the debate over various channel, valley, and gully formation mechanisms on Mars. The controversy over whether liquid water was involved with gully formation, harkens back to the mid-1970s to early 2000s, where catastrophic flooding, surface runnoff and ground-water sapping processes were strongly debated along with other mechanisms as the primary processes responsible for channel and valley formation on Mars. However, over the past decade, the value of multiple working hypotheses has again become apparent, this time in understanding the formation of Martian gullies and Recurring Slope Lineae. Various mechanisms put forth to explain these landforms include liquid H2O/ice erosion, CO2 ice/frost sublimation, CO2 ice block sliding, water and brine flows, salt deliquescence, and dry granular flows, among others.We carried out detailed morphologic/morphometric studies of gullies in various environmental settings on Mars to evaluate the potential formation processes. Using HiRISE images and DTMs, we mapped and generated detailed longitudinal and cross-sectional profiles of gully systems and estimated volumes for both the gullies and their debris aprons. Several gullies form highly integrated patterns similar to fluvial systems. Additionally, RSL are often found either in the tributaries of these integrated systems or in adjacent regions, implying that RSL may play a role in initiating gully formation or mark the last vestiges of water activity in these locations. We also find that the more highly integrated gullies have volumes significantly larger than their aprons, suggesting that the missing volumes (~40-60% or more) were likely the volatiles involved in gully formation. Additionally, THEMIS and TES surface temperatures of these integrated gully sites, many of which also contain RSL, are at or above freezing seasonally suggesting that the volatile component may be consistent with H2O although CO2 cannot be ruled out. Other less integrated systems have apron volumes that equal or exceed the gully volumes suggesting that dry flows, avalanching, gully infill, or other dry processes may have been more important in these environments.

Evaluating Education and Science at the KSC Visitor Complex

NASA Technical Reports Server (NTRS)

Erickson, Lance K.

2002-01-01

As part of a two-year NASA-ASEE project, a preliminary evaluation and subsequent recommendations were developed to improve the education and science content of the Kennedy Space Center Visitor Complex exhibits. Recommendations for improvements in those exhibits were based on qualitative descriptions of the exhibits, on comparisons to similar exhibit collections, and on available evaluation processes. Because of the subjective nature of measuring content in a broad group of exhibits and displays, emphasis is placed on employing a survey format for a follow-on, more quantitative evaluation. The use of an external organization for this evaluation development is also recommended to reduce bias and increase validity.

Evaluating Education and Science at the KSC Visitor Complex

NASA Technical Reports Server (NTRS)

Erickson, Lance K.

2001-01-01

As part of a two-year NASA-ASEE project, a preliminary evaluation and subsequent recommendations were developed to improve the education and science content of the Kennedy Space Center Visitor Complex exhibits. Recommendations for improvements in those exhibits were based on qualitative descriptions of the exhibits, on comparisons to similar exhibit collections, and on available evaluation processes. Because of the subjective nature of measuring content in a broad group of exhibits and displays, emphasis is placed on employing a survey format for a follow-on, more quantitative evaluation. The use of an external organization for this evaluation development is also recommended to reduce bias and increase validity.

[Assessment in Medical Education].

PubMed

Ramírez, Martha Delgado; Gómez-Restrepo, Carlos

2012-01-01

The assessment of medical education is fundamental for proper feedback and evaulation of students. The overall purpose of the evaluation is numerically and formatively revised. The suggested evaluation processes is described taking into account the Miller competence pyramid as a tool for designing evaluations and concepts of validity and reproducibility in assessments. The utility of student and the teacher is also raised. The issue of assessment should leave the knowledge parameters that are usually used. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

A head-up display for low-visibility approach and landing

NASA Technical Reports Server (NTRS)

Bray, R. S.; Scott, B. C.

1981-01-01

An electronic flight-guidance display format was designed for use in evaluations of the collimated head-up display concept in low-visibility landings of transport aircraft. In the design process of iterative evaluation and modification, some general principles, or guidelines, applicable to such flight displays were suggested. The usefulness of an indication of instantaneous inertial flightpath was clearly demonstrated, particularly in low-altitude transition to visual references. Evaluator pilot acceptance of the unfamiliar display concepts was very positive when careful attention was given to indoctrination and training.

A Comparison of Formative and Summative Evaluation.

ERIC Educational Resources Information Center

Belenski, Mary Jo

Formative and summative evaluations in education are compared, and appropriate uses of these methods in program evaluation are discussed. The main purpose of formative evaluation is to determine a level of mastery of a learning task, along with discovering any part of the task that was not mastered. In other words, formative evaluation focuses the…

Lectures based on cardinal symptoms in undergraduate medicine - effects of evaluation-based interventions on teaching large groups

PubMed Central

Kuhnigk, Olaf; Weidtmann, Katja; Anders, Sven; Hüneke, Bernd; Santer, René; Harendza, Sigrid

2011-01-01

Despite critical voices lectures are still an important teaching format in current medical curricula. With the curricular reform at Hamburg Medical Faculty in the year 2004, all subject specific lectures were replaced by cardinal symptom oriented lectures (LSV) in the new clinical curriculum. LSVs are taught throughout all six thematic blocks in years three to five. Since regular student evaluations after each thematic block seemed to demand improvement of the LSVs, this study was carried out using evaluations of individual LSVs by the participating students and by trained auditors (final year students and academic staff). Based on these evaluations feedback containing the individual evaluation data was given in written form to the lecturers combined with information material on planning an LSV using modern didactic techniques. In a second evaluation period, the effects of this intervention were studied. Only small improvements in the LSVs’ quality were noted regarding the level of marks achieved. When individual items were evaluated, especially the didactic quality, significant improvements were noticeable. Overall, on the basis of individual items students ranked the quality of the LSVs significantly higher than trained auditors during the first evaluation period. This effect was no longer seen after the second evaluation period. The inter rater reliability among the auditors was very good. This study shows that regular quality assurance is needed on the structural levels and for staff to accompany the process of embedding teaching formats into curricular concepts. Further investigation is needed to determine the adequate frequency of evaluation and the format of feedback to guarantee sustainable effects of the didactic quality of lectures. PMID:21818230

Semipermeability Evolution of Wakkanai Mudstones During Isotropic Compression

NASA Astrophysics Data System (ADS)

Takeda, M.; Manaka, M.

2015-12-01

Precise identification of major processes that influence groundwater flow system is of fundamental importance for the performance assessment of waste disposal in subsurface. In the characterization of groundwater flow system, gravity- and pressure-driven flows have been conventionally assumed as dominant processes. However, recent studies have suggested that argillites can act as semipermeable membranes and they can cause chemically driven flow, i.e., chemical osmosis, under salinity gradients, which may generate erratic pore pressures in argillaceous formations. In order to identify the possibility that chemical osmosis is involved in erratic pore pressure generations in argillaceous formations, it is essential to measure the semipermeability of formation media; however, in the measurements of semipermeability, little consideration has been given to the stresses that the formation media would have experienced in past geologic processes. This study investigates the influence of stress history on the semipermeability of an argillite by an experimental approach. A series of chemical osmosis experiments were performed on Wakkanai mudstones to measure the evolution of semipermeability during loading and unloading confining pressure cycles. The osmotic efficiency, which represents the semipermeability, was estimated at each confining pressure. The results show that the osmotic efficiency increases almost linearly with increasing confining pressure; however, the increased osmotic efficiency does not recover during unloading unless the confining pressure is almost relieved. The observed unrecoverable change in osmotic efficiency may have an important implication on the evaluation of chemical osmosis in argillaceous formations that have been exposed to large stresses in past geologic processes. If the osmotic efficiency increased by the past stress can remain unchanged to date, the osmotic efficiency should be measured at the past highest stress rather than the current in-situ stress. Otherwise, the effect of chemical osmosis on the pore pressure generation would be underestimated.

Evaluation of selected properties of gluten-free instant gruels processed under various extrusion-cook- ing conditions.

PubMed

Kręcisz, Magdalena; Wójtowicz, Agnieszka

2017-01-01

For consumers suffering with gluten intolerance, the only way to manage the condition is to avoid foods which are high in gluten. Instant gruels, processed from gluten-free corn and rice by extrusion cooking, could be used as a ready meal both for children and for adults on a gluten-free diet. The aim of the study was to evaluate the effects of various processing conditions on selected characteristics of corn-rice instant gruels. Corn-rice mixtures (75:25 and 50:50) were processed at 12, 14, 16 and 18% of initial moisture content, using an extruder with screw speeds of 80, 100 and 120 rpm. Bulk density, water absorption and solubility, gel formation, color and sensory characteristics were assessed, under various pro- cessing conditions and with various corn:rice ratios. The composition of the raw materials, initial moisture content and screw speed applied during processing affected the characteristics of the corn-rice extruded instant gruels. Increasing the amount of rice in the recipe from 25 to 50% resulted in decreased bulk density, water solubility, volumetric gel formation ability and b* value. Increasing the initial moisture content increased the bulk density, L*, a* and b* intensity, and gel formation index values of extrudates made with a 75:25 corn-rice recipe. Increased rpm increased extrudate solubility and water absorption, if the initial moisture content was higher than 14%. The highest scores for overall acceptability were found for milk suspensions of 75:25 and 50:50 corn-rice instant gruels processed at 12 and 14% of initial moisture content, at 120 rpm. Corn-rice instant gruels can be successfully produced by extrusion-cooking. Variable param- eters, like the initial moisture content of raw materials or screw speed during processing significantly affected the properties of the products. An understanding of the effects of processing conditions on some qualities of extruded instant gruels allows more desirable products to be created. Moreover, the various components can be used for extruded products for consumers on gluten-free diets. Functional additives incorporated in the recipe to improve the nutritional value of the extrudates, which will be investigated in our upcoming research.

Evaluation of three electronic report processing systems for preparing hydrologic reports of the U.S Geological Survey, Water Resources Division

USGS Publications Warehouse

Stiltner, G.J.

1990-01-01

In 1987, the Water Resources Division of the U.S. Geological Survey undertook three pilot projects to evaluate electronic report processing systems as a means to improve the quality and timeliness of reports pertaining to water resources investigations. The three projects selected for study included the use of the following configuration of software and hardware: Ventura Publisher software on an IBM model AT personal computer, PageMaker software on a Macintosh computer, and FrameMaker software on a Sun Microsystems workstation. The following assessment criteria were to be addressed in the pilot studies: The combined use of text, tables, and graphics; analysis of time; ease of learning; compatibility with the existing minicomputer system; and technical limitations. It was considered essential that the camera-ready copy produced be in a format suitable for publication. Visual improvement alone was not a consideration. This report consolidates and summarizes the findings of the electronic report processing pilot projects. Text and table files originating on the existing minicomputer system were successfully transformed to the electronic report processing systems in American Standard Code for Information Interchange (ASCII) format. Graphics prepared using a proprietary graphics software package were transferred to all the electronic report processing software through the use of Computer Graphic Metafiles. Graphics from other sources were entered into the systems by scanning paper images. Comparative analysis of time needed to process text and tables by the electronic report processing systems and by conventional methods indicated that, although more time is invested in creating the original page composition for an electronically processed report , substantial time is saved in producing subsequent reports because the format can be stored and re-used by electronic means as a template. Because of the more compact page layouts, costs of printing the reports were 15% to 25% less than costs of printing the reports prepared by conventional methods. Because the largest report workload in the offices conducting water resources investigations is preparation of Water-Resources Investigations Reports, Open-File Reports, and annual State Data Reports, the pilot studies only involved these projects. (USGS)

Analysis of Memory Formation during General Anesthesia (Propofol/Remifentanil) for Elective Surgery Using the Process-dissociation Procedure.

PubMed

Hadzidiakos, Daniel; Horn, Nadja; Degener, Roland; Buchner, Axel; Rehberg, Benno

2009-08-01

There have been reports of memory formation during general anesthesia. The process-dissociation procedure has been used to determine if these are controlled (explicit/conscious) or automatic (implicit/unconscious) memories. This study used the process-dissociation procedure with the original measurement model and one which corrected for guessing to determine if more accurate results were obtained in this setting. A total of 160 patients scheduled for elective surgery were enrolled. Memory for words presented during propofol and remifentanil general anesthesia was tested postoperatively by using a word-stem completion task in a process-dissociation procedure. To assign possible memory effects to different levels of anesthetic depth, the authors measured depth of anesthesia using the BIS XP monitor (Aspect Medical Systems, Norwood, MA). Word-stem completion performance showed no evidence of memory for intraoperatively presented words. Nevertheless, an evaluation of these data using the original measurement model for process-dissociation data suggested an evidence of controlled (C = 0.05; 95% confidence interval [CI] 0.02-0.08) and automatic (A = 0.11; 95% CI 0.09-0.12) memory processes (P < 0.01). However, when the data were evaluated with an extended measurement model taking base rates into account adequately, no evidence for controlled (C = 0.00; 95% CI -0.04 to 0.04) or automatic (A = 0.00; 95% CI -0.02 to 0.02) memory processes was obtained. The authors report and discuss parallel findings for published data sets that were generated by using the process-dissociation procedure. Patients had no memories for auditory information presented during propofol/remifentanil anesthesia after midazolam premedication. The use of the process-dissociation procedure with the original measurement model erroneously detected memories, whereas the extended model, corrected for guessing, correctly revealed no memory.

Consolidation of Bimetallic Nanosized Particles and Formation of Nanocomposites Depending on Conditions of Shock Wave Compaction

NASA Astrophysics Data System (ADS)

Vorozhtsov, S. A.; Kudryashova, O. B.; Lerner, M. I.; Vorozhtsov, A. B.; Khrustalyov, A. P.; Pervikov, A. V.

2017-11-01

The authors consider and evaluate the physical parameters and regularities of the process of consolidation of Fe-Cu, Cu-Nb, Ag-Ni, Fe-Pb nanoparticles when creating composite materials by means of shock wave compaction. As a result of theoretical consideration of explosive compaction process, researchers established and discussed the physical process conditions, established a number of threshold pressure values corresponding to different target indicators of the state of the compact. The time of shock wave impact on powders for powder consolidation was estimated.

Modulation format identification aided hitless flexible coherent transceiver.

PubMed

Xiang, Meng; Zhuge, Qunbi; Qiu, Meng; Zhou, Xingyu; Zhang, Fangyuan; Tang, Ming; Liu, Deming; Fu, Songnian; Plant, David V

2016-07-11

We propose a hitless flexible coherent transceiver enabled by a novel modulation format identification (MFI) scheme for dynamic agile optical networks. The modulation format transparent digital signal processing (DSP) is realized by a block-wise decision-directed least-mean-square (DD-LMS) equalizer for channel tracking, and a pilot symbol aided superscalar phase locked loop (PLL) for carrier phase estimation (CPE). For the MFI, the modulation format information is encoded onto the pilot symbols initially used for CPE. Therefore, the proposed MFI method does not require extra overhead. Moreover, it can identify arbitrary modulation formats including multi-dimensional formats, and it enables tracking of the format change for short data blocks. The performance of the proposed hitless flexible coherent transceiver is successfully evaluated with five modulation formats including QPSK, 16QAM, 64QAM, Hybrid QPSK/8QAM and set-partitioning (SP)-512-QAM. We show that the proposed MFI method induces a negligible performance penalty. Moreover, we experimentally demonstrate that such a hitless transceiver can adapt to fast block-by-block modulation format switching. Finally, the performance improvement of the proposed MFI method is experimentally verified with respect to other commonly used MFI methods.

Methodology of ETV Formative Evaluation.

ERIC Educational Resources Information Center

Duby, Aliza

Formative evaluation is discussed as it relates to educational television (ETV). Formative evaluation, used to improve a project during its development, is especially valuable in the production of television programs. Methods useful in the formative evaluation of ETV are: (1) try-out studies; (2) learner verification and revision; (3)…

Solar TiO2-assisted photocatalytic degradation of IGCC power station effluents using a Fresnel lens.

PubMed

Monteagudo, J M; Durán, A; Guerra, J; García-Peña, F; Coca, P

2008-03-01

The heterogeneous TiO2 assisted photocatalytic degradation of wastewater from a thermoelectric power station under concentrated solar light irradiation using a Fresnel lens has been studied. The efficiency of photocatalytic degradation was determined from the analysis of cyanide and formate removal. Firstly, the influence of the initial concentration of H2O2 and TiO2 on the degradation kinetics of cyanides and formates was studied based on a factorial experimental design. Experimental kinetic constants were fitted using neural networks. Results showed that the photocatalytic process was effective for cyanides destruction (mainly following a molecular mechanism), whereas most of formates (degraded mainly via a radical path) remained unaffected. Finally, to improve formates degradation, the effect of lowering pH on their degradation rate was evaluated after complete cyanide destruction. The photooxidation efficiency of formates reaches a maximum at pH around 5-6. Above pH 6, formate anion is subjected to electrostatic repulsion with the negative surface of TiO2. At pH<4.5, formate adsorption and photon absorption are reduced due to some catalyst agglomeration.

Integrated learning in dentistry: baseline data and first evaluation at the Dental School of Basel.

PubMed

Neuhaus, K W; Schegg, R; Krastl, G; Amato, M; Weiger, R; Walter, C

2008-08-01

Integrated learning modules were introduced and baseline information was collected, in order to identify the expectations regarding e-learning. Furthermore, first formative evaluation of fourth-year dental students was conducted and the experience gained with summative online assessment was reported. Questionnaires designed by Infratest dimap (Berlin, Germany) were distributed to undergraduate students (n = 72) of the School of Dentistry. The fourth-year dental students went through a preliminary evaluation process. An online test was evaluated and compared with a traditional examination. Sixty-three questionnaires were returned. Sixty-five per cent of the students were already familiar with e-learning. All but one student owned at least one personal computer or laptop. Ninety-one per cent of the students expected positive effects from the integration of online modules. Enhanced flexibility regarding time and location as well as comfortable access to learning materials were mentioned most frequently. Ninety per cent of the students expected to achieve better results by finding it easier to understand learning materials produced with multimedia tools. Sixty per cent of the students feared technical complications when using an online platform. The online test was successfully performed. A formative evaluation process demonstrated agreement between expectations and first experiences with e-learning. Most students expect the quality of their studies to improve by implementation of e-learning. Students appreciating regularly updated learning materials particularly emphasise the importance of its visualisation. Online tests might be an option for student's self-performance rating.

"It is not just about the alcohol": service users' views about individualised and standardised clinical assessment in a therapeutic community for alcohol dependence.

PubMed

Alves, Paula Cristina Gomes; Sales, Célia Maria Dias; Ashworth, Mark

2016-07-19

The involvement of service users in health care provision in general, and specifically in substance use disorder treatment, is of growing importance. This paper explores the views of patients in a therapeutic community for alcohol dependence about clinical assessment, including general aspects about the evaluation process, and the specific characteristics of four measures: two individualised and two standardised. A focus group was conducted and data were analysed using a framework synthesis approach. Service users welcomed the experience of clinical assessment, particularly when conducted by therapists. The duration of the evaluation process was seen as satisfactory and most of its contents were regarded as relevant for their population. Regarding the evaluation measures, patients diverged in their preferences for delivery formats (self-report vs. interview). Service users enjoyed the freedom given by individualised measures to discuss topics of their own choosing. However, they felt that part of the standardised questions were difficult to answer, inadequate (e.g. quantification of health status in 0-20 points) and sensitive (e.g. suicide-related issues), particularly for pre-treatment assessments. Patients perceived clinical assessment as helpful for their therapeutic journey, including the opportunity to reflect about their problems, either related or unrelated to alcohol use. Our study suggests that patients prefer to have evaluation protocols administered by therapists, and that measures should ideally be flexible in their formats to accommodate for patient preferences and needs during the evaluation.

Evaluating Bangestan reservoirs and targeting productive zones in Dezful embayment of Iran

NASA Astrophysics Data System (ADS)

Nasseri, Aynur; Jafar Mohammadzadeh, Mohammad; HashemTabatabaee, Seyyed

2016-12-01

A progressive stepwise procedure was adopted to evaluate the main reservoirs of the Bangestan group in a southwestern oil field of Iran. In order to identify productive zones, the results of lithofacies and well tops correlation were assessed using well log and core data. Accordingly the resulting zonation based on lithofacies revealed inaccurate results. Therefore, in order to limit the uncertainty of zonation, well tops correlations were considered. For this purpose, boundaries of reservoirs were precisely defined and well logs correlation was carried out based on geological information and full set logs. The resulting well tops correlation indicates the presence of several reservoirs such as Ilam and Sarvak formations, and each of these has several zones. Among them, the Ilam formation is recognized as the best reservoir in the field and the Sarvak formation in the second priority for oil production. Due to changes in the facies trend of the Sarvak formation, more than Ilam, the Sarvak formation was mostly considered in this study. Subsequently the Ilam formation was divided into four zones, among them (Ilam-Upper, Ilam- Main, Ilam-Poor) were identified as the oil reservoir units. Similarly, the Sarvak formation was also divided into 11 units, where the Sarvak-L2b unit was identified as the oil-bearing reservoir in the formation. Furthermore, in order to contribute for better analysis of the depositional environment and to improve the understanding of its lateral and vertical variations, 3D modeling of reservoir units was established, which lead to limit the uncertainty in evaluation. Based on the well correlation results, deep and thickness maps, porosity, water saturation and the hydrocarbon column assessments were prepared, in addition the distribution of petrophysical parameters was also evaluated. Finally, an oil reserve estimation was carried out based on volumetric estimation and its corresponding distribution maps in different reservoir units of the formation were presented. This study indicates that the consecutive sequential approach to the problem, by self controlling the process, lead to the detection of the Sarvak-L2b unit as one of the productive zones in the field. This zone also indicates favorable conditions for high productivity in central areas of the field where the reservoir has a high quality for production.

Containerless processing of undercooled melts

NASA Technical Reports Server (NTRS)

Shong, D. S.; Graves, J. A.; Ujiie, Y.; Perepezko, J. H.

1987-01-01

Containerless drop tube processing allows for significant levels of liquid undercooling through control of parameters such as sample size, surface coating and cooling rate. A laboratory scale (3 m) drop tube has been developed which allows the undercooling and solidification behavior of powder samples to be evaluated under low gravity free-fall conditions. The level of undercooling obtained in an InSb-Sb eutectic alloy has been evaluated by comparing the eutectic spacing in drop tube samples with a spacing/undercooling relationship established using thermal analysis techniques. Undercoolings of 0.17 and 0.23 T(e) were produced by processing under vacuum and He gas conditions respectively. Alternatively, the formation of an amorphous phase in a Ni-Nb eutectic alloy indicates that undercooling levels of approximately 500 C were obtained by drop tube processing. The influence of droplet size and gas environment on undercooling behavior in the Ni-Nb eutectic was evaluated through their effect on the amorphous/crystalline phase ratio. To supplement the structural analysis, heat flow modeling has been developed to describe the undercooling history during drop tube processing, and the model has been tested experimentally.

Imaging first impressions: distinct neural processing of verbal and nonverbal social information.

PubMed

Kuzmanovic, Bojana; Bente, Gary; von Cramon, D Yves; Schilbach, Leonhard; Tittgemeyer, Marc; Vogeley, Kai

2012-03-01

First impressions profoundly influence our attitudes and behavior toward others. However, little is known about whether and to what degree the cognitive processes that underlie impression formation depend on the domain of the available information about the target person. To investigate the neural bases of the influence of verbal as compared to nonverbal information on interpersonal judgments, we identified brain regions where the BOLD signal parametrically increased with increasing strength of evaluation based on either short text vignettes or mimic and gestural behavior. While for verbal stimuli the increasing strength of subjective evaluation was correlated with increased neural activation of precuneus and posterior cingulate cortex (PC/PCC), a similar effect was observed for nonverbal stimuli in the amygdala. These findings support the assumption that qualitatively different cognitive operations underlie person evaluation depending upon the stimulus domain: while the processing of nonverbal person information may be more strongly associated with affective processing as indexed by recruitment of the amygdala, verbal person information engaged the PC/PCC that has been related to social inferential processing. Copyright © 2011 Elsevier Inc. All rights reserved.

Chemical activation of Wnt/β-catenin signalling inhibits innervation and causes skeletal tissue malformations during axolotl limb regeneration.

PubMed

Wischin, Sabina; Castañeda-Patlán, Cristina; Robles-Flores, Martha; Chimal-Monroy, Jesús

2017-04-01

Limb regeneration involves several interrelated physiological processes in which a particular signalling pathway may play a variety of functions. Blocking the function of Wnt/β-catenin signalling during limb regeneration inhibits regeneration in axolotls (Ambystoma mexicanum). Limb development shares many features with limb regeneration, and Wnt/β-catenin activation has different effects depending on the developmental stage. The aim of this study was to evaluate whether Wnt/β-catenin signalling activation during axolotl limb regeneration has different effects when activated at different stages of regeneration. To evaluate this hypothesis, we treated amputated axolotls with a Wnt agonist chemical at different stages of limb regeneration. The results showed that limb regeneration was inhibited when the treatment began before blastema formation. Under these conditions, blastema formation was hindered, possibly due to the lack of innervation. On the other hand, when axolotls were treated after blastema formation and immediately before the onset of morphogenesis, we observed structural disorganization in skeletal formation. In conclusion, we found that limb regeneration was differentially affected depending on the stage at which the Wnt signalling pathway was activated. Copyright © 2017 Elsevier B.V. All rights reserved.

Effects of ozone and ozone/peroxide on trace organic contaminants and NDMA in drinking water and water reuse applications.

PubMed

Pisarenko, Aleksey N; Stanford, Benjamin D; Yan, Dongxu; Gerrity, Daniel; Snyder, Shane A

2012-02-01

An ozone and ozone/peroxide oxidation process was evaluated at pilot scale for trace organic contaminant (TOrC) mitigation and NDMA formation in both drinking water and water reuse applications. A reverse osmosis (RO) pilot was also evaluated as part of the water reuse treatment train. Ozone/peroxide showed lower electrical energy per order of removal (EEO) values for TOrCs in surface water treatment, but the addition of hydrogen peroxide increased EEO values during wastewater treatment. TOrC oxidation was correlated to changes in UV(254) absorbance and fluorescence offering a surrogate model for predicting contaminant removal. A decrease in N-nitrosodimethylamine (NDMA) formation potential (after chloramination) was observed after treatment with ozone and ozone/peroxide. However, during spiking experiments with surface water, ozone/peroxide achieved limited destruction of NDMA, while in wastewaters net direct formation of NDMA of 6-33 ng/L was observed after either ozone or ozone/peroxide treatment. Once formed during ozonation, NDMA passed through the subsequent RO membranes, which highlights the significance of the potential for direct NDMA formation during oxidation in reuse applications. Copyright © 2011 Elsevier Ltd. All rights reserved.

Open-Minded Midwifes, Literate Butchers, and Greedy Hooligans-The Independent Contributions of Stereotype Valence and Consistency on Evaluative Judgments.

PubMed

Schubert, Lisa; Körner, Anita; Lindau, Berit; Strack, Fritz; Topolinski, Sascha

2017-01-01

Do people evaluate an open-minded midwife less positively than a caring midwife? Both open-minded and caring are generally seen as positive attributes. However, consistency varies-the attribute caring is consistent with the midwife stereotype while open-minded is not. In general, both stimulus valence and consistency can influence evaluations. Six experiments investigated the respective influence of valence and consistency on evaluative judgments in the domain of stereotyping. In an impression formation paradigm, valence and consistency of stereotypic information about target persons were manipulated orthogonally and spontaneous evaluations of these target persons were measured. Valence reliably influenced evaluations. However, for strongly valenced stereotypes, no effect of consistency was observed. Parameters possibly preventing the occurrence of consistency effects were ruled out, specifically, valence of inconsistent attributes, processing priority of category information, and impression formation instructions. However, consistency had subtle effects on evaluative judgments if the information about a target person was not strongly valenced and experimental conditions were optimal. Concluding, in principle, both stereotype valence and consistency can play a role in evaluative judgments of stereotypic target persons. However, the more subtle influence of consistency does not seem to substantially influence evaluations of stereotyped target persons. Implications for fluency research and stereotype disconfirmation are discussed.

Open-Minded Midwifes, Literate Butchers, and Greedy Hooligans—The Independent Contributions of Stereotype Valence and Consistency on Evaluative Judgments

PubMed Central

Schubert, Lisa; Körner, Anita; Lindau, Berit; Strack, Fritz; Topolinski, Sascha

2017-01-01

Do people evaluate an open-minded midwife less positively than a caring midwife? Both open-minded and caring are generally seen as positive attributes. However, consistency varies—the attribute caring is consistent with the midwife stereotype while open-minded is not. In general, both stimulus valence and consistency can influence evaluations. Six experiments investigated the respective influence of valence and consistency on evaluative judgments in the domain of stereotyping. In an impression formation paradigm, valence and consistency of stereotypic information about target persons were manipulated orthogonally and spontaneous evaluations of these target persons were measured. Valence reliably influenced evaluations. However, for strongly valenced stereotypes, no effect of consistency was observed. Parameters possibly preventing the occurrence of consistency effects were ruled out, specifically, valence of inconsistent attributes, processing priority of category information, and impression formation instructions. However, consistency had subtle effects on evaluative judgments if the information about a target person was not strongly valenced and experimental conditions were optimal. Concluding, in principle, both stereotype valence and consistency can play a role in evaluative judgments of stereotypic target persons. However, the more subtle influence of consistency does not seem to substantially influence evaluations of stereotyped target persons. Implications for fluency research and stereotype disconfirmation are discussed. PMID:29062289

Dual-species biofilm of Listeria monocytogenes and Escherichia coli on stainless steel surface.

PubMed

de Grandi, Aline Zago; Pinto, Uelinton Manoel; Destro, Maria Teresa

2018-04-12

Listeria monocytogenes is a Gram-positive bacterium commonly associated with foodborne diseases. Due its ability to survive under adverse environmental conditions and to form biofilm, this bacterium is a major concern for the food industry, since it can compromise sanitation procedures and increase the risk of post-processing contamination. Little is known about the interaction between L. monocytogenes and Gram-negative bacteria on biofilm formation. Thus, in order to evaluate this interaction, Escherichia coli and L. monocytogenes were tested for their ability to form biofilms together or in monoculture. We also aimed to evaluate the ability of L. monocytogenes 1/2a and its isogenic mutant strain (ΔprfA ΔsigB) to form biofilm in the presence of E. coli. We assessed the importance of the virulence regulators, PrfA and σ B , in this process since they are involved in many aspects of L. monocytogenes pathogenicity. Biofilm formation was assessed using stainless steel AISI 304 #4 slides immersed into brain heart infusion broth, reconstituted powder milk and E. coli preconditioned medium at 25 °C. Our results indicated that a higher amount of biofilm was formed by the wild type strain of L. monocytogenes than by its isogenic mutant, indicating that prfA and sigB are important for biofilm development, especially maturation under our experimental conditions. The presence of E. coli or its metabolites in preconditioned medium did not influence biofilm formation by L. monocytogenes. Our results confirm the possibility of concomitant biofilm formation by L. monocytogenes and E. coli, two bacteria of major significance in the food industry.

Pathologic Remodeling of Endoneurial Tubules in Human Neuromas

PubMed Central

Karsy, Michael; Palmer, Cheryl A

2018-01-01

Background: Laminins are extracellular matrix proteins that participate in endoneurial tubule formation and are important in the regeneration of nerves after injury. They act as scaffolds to guide nerves to distal targets and play a key role in neurite outgrowth. Because there is evidence that laminin architecture affects nerve regeneration, we evaluated endoneurial tubules by examining the laminin structure in clinical samples from patients with nerve injuries. Methods: In a retrospective review of eight nerve injury cases, we evaluated nerve histology in relation to clinical history and injury type. The immunohistochemical delineation of the laminin structure in relationship with the neuroma type was performed. Results: Five cases of upper-trunk stretch injuries—four from childbirth injury and one from a motorcycle accident—and three cases of nerve laceration leading to neuroma formation were examined. In the upper-trunk stretch injuries, avulsed nerves demonstrated no neuroma formation with a linear laminin architecture and a regular Schwann cell arrangement, but increased fibrous tissue deposition. For neuromas-in-continuity after a stretch injury, laminin immunohistochemistry demonstrated a double-lumen laminin tubule, with encapsulation of the Schwann cells and axonal processes. Nerve laceration leading to stump neuroma formation had a similar double-lumen laminin tubule, but less severe fibrosis. Conclusions: In nerve injuries with regenerative capacity, endoneurial tubules become pathologically disorganized. A double-lumen endoneurial tubule of unclear significance develops. The consistency of this pattern potentially suggests a reproducible pathophysiologic process. Further exploration of this pathophysiologic healing may provide insight into the failure of programmed peripheral nerve regeneration after injury. PMID:29560300

Plasma rich in growth factors (PRGF-Endoret) stimulates corneal wound healing and reduces haze formation after PRK surgery.

PubMed

Anitua, E; Muruzabal, F; Alcalde, I; Merayo-Lloves, J; Orive, G

2013-10-01

This study evaluated the efficacy of Plasma rich in growth factors (PRGF-Endoret) on the corneal wound healing process after Photorefractive keratectomy (PRK). To address this, blood from three healthy donors was collected, centrifuged and, the whole plasma column (WP) and the plasma fraction with the highest platelet concentration (F3) were collected. The effects of F3 and WP on the proliferation and migration of human corneal epithelial cells (HCE) were analyzed. PRK was performed on C57BL/6 mice. Animals were divided in three treatment groups: Control, F3, and WP. Corneal wound healing and haze formation were evaluated macroscopically. Eyes were collected at 1, 2, 3, and 7 days after surgery, and were processed for histological studies. Immunofluorescence was used to assess cellular proliferation, apoptosis and myofibroblast transformation in the mouse cornea. Results showed a significant increased on proliferation and wound healing after F3 and WP treatment when compared with control group. In vivo studies showed significant reduction on haze formation in mice treated with both PRGF-Endoret formulations (F3 and WP). Histological studies showed an increase of epithelial cell proliferation in corneas of control group, promoting an epithelial hyperplasia. The number of SMA-positive cells (corresponding to myofibroblast differentiation) was significantly lower in the PRGF-Endoret group than in the control group, correlating with the higher transparence results observed macroscopically in both PRGF-Endoret groups. According to this, it can be concluded that PRGF-Endoret accelerates corneal tissue regeneration after PRK, reducing haze formation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Mechanisms of masked evaluative priming: task sets modulate behavioral and electrophysiological priming for picture and words differentially.

PubMed

Kiefer, Markus; Liegel, Nathalie; Zovko, Monika; Wentura, Dirk

2017-04-01

Research with the evaluative priming paradigm has shown that affective evaluation processes reliably influence cognition and behavior, even when triggered outside awareness. However, the precise mechanisms underlying such subliminal evaluative priming effects, response activation vs semantic processing, are matter of a debate. In this study, we determined the relative contribution of semantic processing and response activation to masked evaluative priming with pictures and words. To this end, we investigated the modulation of masked pictorial vs verbal priming by previously activated perceptual vs semantic task sets and assessed the electrophysiological correlates of priming using event-related potential (ERP) recordings. Behavioral and electrophysiological effects showed a differential modulation of pictorial and verbal subliminal priming by previously activated task sets: Pictorial priming was only observed during the perceptual but not during the semantic task set. Verbal priming, in contrast, was found when either task set was activated. Furthermore, only verbal priming was associated with a modulation of the N400 ERP component, an index of semantic processing, whereas a priming-related modulation of earlier ERPs, indexing visuo-motor S-R activation, was found for both picture and words. The results thus demonstrate that different neuro-cognitive processes contribute to unconscious evaluative priming depending on the stimulus format. © The Author (2016). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Early-term and mid-term histologic events during single-level posterolateral intertransverse process fusion with rhBMP-2/collagen carrier and a ceramic bulking agent in a nonhuman primate model: implications for bone graft preparation.

PubMed

Khan, Safdar N; Toth, Jeffrey M; Gupta, Kavita; Glassman, Steven D; Gupta, Munish C

2014-06-01

We used a nonhuman primate lumbar intertransverse process arthrodesis model to evaluate biological cascade of bone formation using different carrier preparation methods with a single dose of recombinant human bone morphogenetic protein-2 (rhBMP-2) at early time points. To examine early-term/mid-term descriptive histologic and computerized tomographic events in single-level uninstrumented posterolateral nonhuman primate spinal fusions using rhBMP-2/absorbable collagen sponge (ACS) combined with ceramic bulking agents in 3 different configurations. rhBMP-2 on an ACS carrier alone leads to consistent posterolateral lumbar spine fusions in lower-order animals; however, these results have been difficult to replicate in nonhuman primates. Twelve skeletally mature, rhesus macaque monkeys underwent single-level posterolateral arthrodesis at L4-L5. A hydroxyapatite/β-tricalcium phosphate ceramic bulking agent in 3 formulations was used in the treatment groups (n=3). When used, rhBMP-2/ACS at 1.5 mg/cm (3.0 mg rhBMP-2) was combined with 2.5 cm of ceramic bulking agent per side. Animals were euthanized at 4 and 12 weeks postoperative. Computerized tomography scans were performed immediately postoperatively and every 4 weeks until they were euthanized. Sagittal histologic sections were evaluated for bone histogenesis and location, cellular infiltration of the graft/substitute, and bone remodeling activity. Significant histologic differences in the developing fusion appeared between the 3 rhBMP-2/ACS treatment groups at 4 and 12 weeks. At 4 weeks, bone formation appeared to originate at the transverse process and the intertransverse membrane. Cellular infiltration was greatest in granular ceramic groups compared with matrix ceramic group. Minimal to no residual ACS was identified at the early time point. At 12 weeks, marked ceramic remodeling was observed with continued bone formation noted in all carrier groups. At the early time period, histology showed that bone formation appeared to originate at the transverse processes and the intertransverse membrane, indicating that the dorsal muscle bed may not be the only location for bone formation. Histology also showed that the collagen carrier for rhBMP-2 is mostly resorbed by 4 weeks. Our results and previous literature indicate that ceramic bulking agents are needed to provide resistance to compression caused by paraspinal muscles on the fusion bed in the posterolateral environment. Histology showed that ceramic bulking agents may offer long-term scaffolding and a structure to supporting bone formation of the developing fusion mass.

Tin-tungsten mineralizing processes in tungsten vein deposits: Panasqueira, Portugal

NASA Astrophysics Data System (ADS)

Lecumberri-Sanchez, P.; Pinto, F.; Vieira, R.; Wälle, M.; Heinrich, C. A.

2015-12-01

Tungsten has a high heat resistance, density and hardness, which makes it widely applied in industry (e.g. steel, tungsten carbides). Tungsten deposits are typically magmatic-hydrothermal systems. Despite the economic significance of tungsten, there are no modern quantitative analytical studies of the fluids responsible for the formation of its highest-grade deposit type (tungsten vein deposits). Panasqueira (Portugal) is a tungsten vein deposit, one of the leading tungsten producers in Europe and one of the best geologically characterized tungsten vein deposits. In this study, compositions of the mineralizing fluids at Panasqueira have been determined through combination of detailed petrography, microthermometric measurements and LA-ICPMS analyses, and geochemical modeling has been used to determine the processes that lead to tungsten mineralization. We characterized the fluids related to the various mineralizing stages in the system: the oxide stage (tin and tungsten mineralization), the sulfide stage (chalcopyrite and sphalerite mineralization) and the carbonate stage. Thus, our results provide information on the properties of fluids related with specific paragenetic stages. Furthermore we used those fluid compositions in combination with host rock mineralogy and chemistry to evaluate which are the controlling factors in the mineralizing process. This study provides the first quantitative analytical data on fluid composition for tungsten vein deposits and evaluates the controlling mineralization processes helping to determine the mechanisms of formation of the Panasqueira tin-tungsten deposit and providing additional geochemical constraints on the local distribution of mineralization.

A General Multivariate Latent Growth Model with Applications to Student Achievement

ERIC Educational Resources Information Center

Bianconcini, Silvia; Cagnone, Silvia

2012-01-01

The evaluation of the formative process in the University system has been assuming an ever increasing importance in the European countries. Within this context, the analysis of student performance and capabilities plays a fundamental role. In this work, the authors propose a multivariate latent growth model for studying the performances of a…

An Evaluation of Academic Training Program (ÖYP) from Professional Socialisation and Identity Perspective

ERIC Educational Resources Information Center

Tülübas, Tijen; Göktürk, Söheyda

2017-01-01

Academic identity is significant in terms of taking the responsibilities of professional roles and performing them adequately. Identity formation starts from the early socialisation experiences of graduate students and develops on what they have acquired during this process. Therefore, Academic Training Program is significant for determining the…

Automated Error Detection for Developing Grammar Proficiency of ESL Learners

ERIC Educational Resources Information Center

Feng, Hui-Hsien; Saricaoglu, Aysel; Chukharev-Hudilainen, Evgeny

2016-01-01

Thanks to natural language processing technologies, computer programs are actively being used not only for holistic scoring, but also for formative evaluation of writing. CyWrite is one such program that is under development. The program is built upon Second Language Acquisition theories and aims to assist ESL learners in higher education by…

Moving Every Child Ahead: The Big6 Success Strategy.

ERIC Educational Resources Information Center

Berkowitz, Bob; Serim, Ferdi

2002-01-01

Explains the Big6 approach to teaching information skills and describes its use in a high school social studies class to improve student test scores, teach them how to learn, and improve the teachers' skills. Highlights include the balance between content and process, formative and summative evaluation, assignment organizers, and study tips. (LRW)

The Study of Curricular Dependency

ERIC Educational Resources Information Center

Anastasiu, Dragos

2006-01-01

In the educational process, the disciplines D1, D2,...,Dn have a succession which is generated by the content and the final objective--the student formation. In this work, the disciplines are presented as structured text entities. The graph associated to the disciplines is established. A method for dependencies evaluation is proposed. The testing…

The Research Resource Guide: A Description and Formative Evaluation

ERIC Educational Resources Information Center

Jones, Ethel; Ralston, Penny; Coccia, Catherine; Young-Clark, Iris; Atkinson, Cheryl; Davis, Kimberly E.; Fluellen, Vivian; Hausafus, Cheryl O.; Johnson, Linda; Prowell, Grace

2014-01-01

Undergraduate research is important for preparing the next generation of scholars in family and consumer sciences (FCS). The Research Resource Guide (RRG) was developed in response to that need; it provides comprehensive information on the research process for faculty to incorporate into undergraduate courses. The RRG comprises three levels: (a)…

Characterization versus Narration: Drama's Role in Multimedia Instructional Software

ERIC Educational Resources Information Center

Cates, Ward Mitchell; Bishop, M. J.; Hung, Woei

2005-01-01

As part of an ongoing research program, the authors investigated the use of single-voiced narration and multi-voiced characterizations/monologues in a formative evaluation study of an instructional lesson on information processing. That lesson employed a design based on the use of content-related metaphors and a metaphorical graphical user…

Developing a Comprehensive and Articulated Nuclear Training Curriculum--The Westinghouse Model.

ERIC Educational Resources Information Center

Widen, William C.

After conducting a comprehensive evaluation of its curriculum, staff at the Westinghouse Nuclear Training Center in Zion, Illinois, undertook a research and development project aimed at upgrading the center's curriculum to the competency-based format. Included among the main activities of the curriculum development process were the following:…

QCloud: A cloud-based quality control system for mass spectrometry-based proteomics laboratories

PubMed Central

Chiva, Cristina; Olivella, Roger; Borràs, Eva; Espadas, Guadalupe; Pastor, Olga; Solé, Amanda

2018-01-01

The increasing number of biomedical and translational applications in mass spectrometry-based proteomics poses new analytical challenges and raises the need for automated quality control systems. Despite previous efforts to set standard file formats, data processing workflows and key evaluation parameters for quality control, automated quality control systems are not yet widespread among proteomics laboratories, which limits the acquisition of high-quality results, inter-laboratory comparisons and the assessment of variability of instrumental platforms. Here we present QCloud, a cloud-based system to support proteomics laboratories in daily quality assessment using a user-friendly interface, easy setup, automated data processing and archiving, and unbiased instrument evaluation. QCloud supports the most common targeted and untargeted proteomics workflows, it accepts data formats from different vendors and it enables the annotation of acquired data and reporting incidences. A complete version of the QCloud system has successfully been developed and it is now open to the proteomics community (http://qcloud.crg.eu). QCloud system is an open source project, publicly available under a Creative Commons License Attribution-ShareAlike 4.0. PMID:29324744

Evaluation of the relationship between bulk organic precursors and disinfection byproduct formation for advanced oxidation processes.

PubMed

Mayer, Brooke K; Daugherty, Erin; Abbaszadegan, Morteza

2015-02-01

Advanced oxidation processes (AOPs) are gaining traction as they offer mineralization potential rather than transferring contaminants between media. However, AOPs operated with limited energy and/or chemical inputs can exacerbate disinfection byproduct (DBP) formation, even as precursors such as dissolved organic carbon, UV254, and specific UV absorbance (SUVA) decrease. This study examined the relationship between DBP precursors and formation using TiO2 photocatalysis experiments, external AOP and non-AOP data, and predictive DBP models. The top-performing indicator, SUVA, generally correlated positively with trihalomethanes and haloacetic acids, but limited-energy photocatalysis yielded contrasting negative correlations. The accuracy of predicted DBP values from models based on bulk parameters was generally poor, regardless of use and extent of AOP treatment and type of source water. Though performance improved for scenarios bounded by conditions used in model development, only 0.5% of the model/dataset pairings satisfied all measured parameter boundary conditions, thereby introducing skepticism toward model usefulness. Study findings suggest that caution should be employed when using bulk indicators and/or models as a metric for AOP mitigation of DBP formation potential, particularly for limited-energy/chemical inputs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Simplifying healthful choices: a qualitative study of a physical activity based nutrition label format

PubMed Central

2013-01-01

Background This study used focus groups to pilot and evaluate a new nutrition label format and refine the label design. Physical activity equivalent labels present calorie information in terms of the amount of physical activity that would be required to expend the calories in a specified food item. Methods Three focus groups with a total of twenty participants discussed food choices and nutrition labeling. They provided information on comprehension, usability and acceptability of the label. A systematic coding process was used to apply descriptive codes to the data and to identify emerging themes and attitudes. Results Participants in all three groups were able to comprehend the label format. Discussion about label format focused on issues including gender of the depicted figure, physical fitness of the figure, preference for walking or running labels, and preference for information in miles or minutes. Feedback from earlier focus groups was used to refine the labels in an iterative process. Conclusions In contrast to calorie labels, participants shown physical activity labels asked and answered, “How does this label apply to me?” This shift toward personalized understanding may indicate that physical activity labels offer an advantage over currently available nutrition labels. PMID:23742678

Evaluation of implants coated with recombinant human bone morphogenetic protein-2 and vacuum-dried using the critical-size supraalveolar peri-implant defect model in dogs.

PubMed

Decker, John F; Lee, Jaebum; Cortella, Carlo Alberto; Polimeni, Giuseppe; Rohrer, Michael D; Wozney, John M; Hall, Jan; Susin, Cristiano; Wikesjö, Ulf M E

2010-12-01

Endosseous implants coated with recombinant human bone morphogenetic protein-2 (rhBMP-2) in a laboratory bench setting and air-dried induce relevant bone formation but also resident bone remodeling. Thus, the objective of this study is to evaluate the effect of implants fully or partially coated with rhBMP-2 and vacuum-dried using an industrial process on local bone formation and resident bone remodeling. Twelve male adult Hound Labrador mongrel dogs were used. Critical-size, supraalveolar, peri-implant defects received titanium porous oxide surface implants coated in their most coronal aspect with rhBMP-2 (coronal-load, six animals), or by immersion of the entire implant in a rhBMP-2 solution (soak-load, six animals) for a total of 30 μg rhBMP-2 per implant. All implants were vacuum-dried. The animals were sacrificed at 8 weeks for histometric evaluation. Clinical healing was unremarkable. Bone formation was not significantly affected by the rhBMP-2 application protocol. New bone height and area averaged (± SE) 3.2 ± 0.5 versus 3.6 ± 0.3 mm, and 2.3 ± 0.5 versus 2.6 ± 0.8 mm(2) for coronal-load and soak-load implants, respectively (P >0.05). The corresponding bone density and bone-implant contact registrations averaged 46.7% ± 5.8% versus 31.6% ± 4.4%, and 28% ± 5.6% versus 36.9% ± 3.4% (P >0.05). In contrast, resident bone remodeling was significantly influenced by the rhBMP-2 application protocol. Peri-implant bone density averaged 72.2% ± 2.1% for coronal-load versus 60.6% ± 4.7% for soak-load implants (P <0.05); the corresponding bone-implant contact averaged 70.7% ± 6.1% versus 47.2% ± 6.0% (P <0.05). Local application of rhBMP-2 and vacuum-drying using industrial process seems to be a viable technology to manufacture implants that support local bone formation and osseointegration. Coronal-load implants obviate resident bone remodeling without compromising local bone formation.

Meta-evaluation of a participatory process in the strengthening of municipal management

PubMed Central

de Almeida, Cristiane Andrea Locatelli; Tanaka, Oswaldo Yoshimi

2017-01-01

ABSTRACT OBJECTIVE To evaluate, with a focus on participation, an evaluation process developed by municipal managers and administrators of a health region in the state of São Paulo, considering the need for theoretical reflection on participatory health practices in the Brazilian context. METHODS Qualitative research that used the framework developed by Daigneault and Jacob (2009) to analyze the empirical material, encompassing three dimensions of participation: control of the evaluation process, diversity of participants, and extent of their involvement. We highlighted decisions or contextual aspects that deepened or limited the participatory option in the process under study. RESULTS We identified the presence and important performance of stakeholders who are “not specialists in evaluation”, through participation both in the direction of the evaluation process and in its distinct stages. The formed group started from their own annoyances added to the need for information and reflection to define the subject and scope of the evaluation; the use of the process planned by them guided the definition of the data to be collected and the format of result dissemination; the empirical material analysis was undertaken jointly by the participants. Regarding the third dimension, a limitation was identified regarding the diversity of actors involved due to the prioritization of the possibility of in-depth work with a fixed group of managers. CONCLUSIONS It is stated that there is no “ideal participation model” for evaluations. In certain contexts and structures, real opportunities for participation – even if they seem fragile at first sight – should be leveraged, and that requires flexibility and critical reflection on the part of those responsible for the evaluation processes to undertake the necessary adjustments. PMID:29166448

Formative and summative evaluation efforts for the Teacher Enhancement Institute conducted at the NASA Langley Research Center, summer 1994

NASA Technical Reports Server (NTRS)

Carlson, Randal D.

1994-01-01

The Teacher Enhancement Institute (TEI) at NASA Langley Research Center was developed in response to Executive Order 12821 which mandates national laboratories to 'assist in the mathematics and science education of our Nation's students, teachers, parents, and the public by establishing programs at their agency to provide for training elementary and secondary school teachers to improve their knowledge of mathematics and science. Such programs, to the maximum extent possible, shall involve partnerships with universities, state and local elementary and secondary school authorities, corporations and community based organizations'. The faculty worked closely with one another and the invited speakers to insure that the sessions supported the objectives. Speakers were informed of the objectives and given guidance concerning form and function for the session. Faculty members monitored sessions to assist speakers and to provide a quality control function. Faculty provided feedback to speakers concerning general objective accomplishment. Participant comments were also provided when applicable. Post TEI surveys asked for specific comments about each TEI session. During the second of the two, two week institutes, daily critiques were provided to the participants for their reflection. This seemed to provide much improved feedback to speakers and faculty because the sessions were fresh in each participant's mind. Between sessions one and two, some changes were made to the program as a result of the formative evaluation process. Those changes, though, were minor in nature and comprised what may be called 'fine tuning' a well conceived and implemented program. After the objectives were written, an assessment instrument was developed to test the accomplishment of the objectives. This instrument was actually two surveys, one given before the TEI and one given after the TEI. In using such a series, it was expected that changes in the participants induced by attendance at TEI may be discovered. Because the institute was limited in time and depth of exposure, attitudinal changes (self-assessment of ability and confidence) were chosen to be surveyed. On the pre-survey, seven general categories of questions were asked. The post-survey repeated three of these categories, providing a pre and post evaluation of the same questions and added a fourth category which asked the participant to self-assess objective accomplishment. The assessment process for TEI was valuable when one looks at the final accomplishments of the TEI. A number of aspects stand out: (1) formative evaluation during project development allowed the goals and objectives to guide the development of the institute; (2) formative evaluation provided positive guidance to presenters in developing and implementing their session; (3) formative evaluation helped presenters to improve or focus their sessions; (4) summative evaluation provided managers a way to gauge the success of the institute; (5) summative evaluation provided a benchmark for future programs to be measured against.

Of two minds or one? A registered replication of Rydell et al. (2006).

PubMed

Heycke, Tobias; Gehrmann, Sarah; Haaf, Julia M; Stahl, Christoph

2018-01-31

Evaluative conditioning (EC) is proposed as a mechanism of automatic preference acquisition in dual-process theories of attitudes (Gawronski, B., & Bodenhausen, G. V. (2006). Associative and propositional processes in evaluation: An integrative review of implicit and explicit attitude change. Psychological Bulletin, 132(5), 692-731. doi:10.1037/0033-2909.132.5.692). Evidence for the automaticity of EC comes from studies claiming EC effects for subliminally presented stimuli. An impression-formation study showed a selective influence of briefly presented primes on implicitly measured attitudes, whereas supraliminally presented behavioural information about the target person was reflected in explicit ratings (Rydell, R. J., McConnell, A. R., Mackie, D. M., & Strain, L. M. (2006). Of two minds forming and changing valence-inconsistent implicit and explicit attitudes. Psychological Science, 17(11), 954-958. doi:10.1111/j.1467-9280.2006.01811.x) This finding is considered one of the strongest pieces of evidence for dual process theories (Sweldens, S., Corneille, O., & Yzerbyt, V. (2014). The role of awareness in attitude formation through evaluative conditioning. Personality and Social Psychology Review, 18(2), 187-209. doi:10.1177/1088868314527832), and it is therefore crucial to assess its reliability and robustness. The present study presents two registered replications of the Rydell et al. (2006) study. In contrast to the original findings, the implicit measures did not reflect the valence of the subliminal primes in both studies.

Using Instructional Design, Analyze, Design, Develop, Implement, and Evaluate, to Develop e-Learning Modules to Disseminate Supported Employment for Community Behavioral Health Treatment Programs in New York State.

PubMed

Patel, Sapana R; Margolies, Paul J; Covell, Nancy H; Lipscomb, Cristine; Dixon, Lisa B

2018-01-01

Implementation science lacks a systematic approach to the development of learning strategies for online training in evidence-based practices (EBPs) that takes the context of real-world practice into account. The field of instructional design offers ecologically valid and systematic processes to develop learning strategies for workforce development and performance support. This report describes the application of an instructional design framework-Analyze, Design, Develop, Implement, and Evaluate (ADDIE) model-in the development and evaluation of e-learning modules as one strategy among a multifaceted approach to the implementation of individual placement and support (IPS), a model of supported employment for community behavioral health treatment programs, in New York State. We applied quantitative and qualitative methods to develop and evaluate three IPS e-learning modules. Throughout the ADDIE process, we conducted formative and summative evaluations and identified determinants of implementation using the Consolidated Framework for Implementation Research (CFIR). Formative evaluations consisted of qualitative feedback received from recipients and providers during early pilot work. The summative evaluation consisted of levels 1 and 2 (reaction to the training, self-reported knowledge, and practice change) quantitative and qualitative data and was guided by the Kirkpatrick model for training evaluation. Formative evaluation with key stakeholders identified a range of learning needs that informed the development of a pilot training program in IPS. Feedback on this pilot training program informed the design document of three e-learning modules on IPS: Introduction to IPS, IPS Job development, and Using the IPS Employment Resource Book . Each module was developed iteratively and provided an assessment of learning needs that informed successive modules. All modules were disseminated and evaluated through a learning management system. Summative evaluation revealed that learners rated the modules positively, and self-report of knowledge acquisition was high (mean range: 4.4-4.6 out of 5). About half of learners indicated that they would change their practice after watching the modules (range: 48-51%). All learners who completed the level 1 evaluation demonstrated 80% or better mastery of knowledge on the level 2 evaluation embedded in each module. The CFIR was used to identify implementation barriers and facilitators among the evaluation data which facilitated planning for subsequent implementation support activities in the IPS initiative. Instructional design approaches such as ADDIE may offer implementation scientists and practitioners a flexible and systematic approach for the development of e-learning modules as a single component or one strategy in a multifaceted approach for training in EBPs.

Evaluating portfolio use as a tool for assessment and professional development in graduate nursing education.

PubMed

Ryan, Marybeth

2011-01-01

The portfolio is emerging as an efficient and effective method for evaluating program outcomes and professional development in nursing education. Although there is a host of literature about the use of portfolios in undergraduate nursing programs, fewer reports exist about their use in graduate nursing education. This article presents the results of a formative evaluation process, using student and faculty focus groups, conducted at a midsized university's graduate nursing education program to determine the effectiveness of portfolio use. Content analysis of the focus group data yielded three student themes and two faculty themes with associated theme clusters that revealed similarities and unique perceptions of students and faculty regarding the portfolio process. The information gleaned will provide direction to faculty as they make decisions about the use of this evaluation method in the graduate program. Copyright © 2011. Published by Elsevier Inc.

Evaluating concentration estimation errors in ELISA microarray experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daly, Don S.; White, Amanda M.; Varnum, Susan M.

Enzyme-linked immunosorbent assay (ELISA) is a standard immunoassay to predict a protein concentration in a sample. Deploying ELISA in a microarray format permits simultaneous prediction of the concentrations of numerous proteins in a small sample. These predictions, however, are uncertain due to processing error and biological variability. Evaluating prediction error is critical to interpreting biological significance and improving the ELISA microarray process. Evaluating prediction error must be automated to realize a reliable high-throughput ELISA microarray system. Methods: In this paper, we present a statistical method based on propagation of error to evaluate prediction errors in the ELISA microarray process. Althoughmore » propagation of error is central to this method, it is effective only when comparable data are available. Therefore, we briefly discuss the roles of experimental design, data screening, normalization and statistical diagnostics when evaluating ELISA microarray prediction errors. We use an ELISA microarray investigation of breast cancer biomarkers to illustrate the evaluation of prediction errors. The illustration begins with a description of the design and resulting data, followed by a brief discussion of data screening and normalization. In our illustration, we fit a standard curve to the screened and normalized data, review the modeling diagnostics, and apply propagation of error.« less

Optimization of energy window and evaluation of scatter compensation methods in MPS using the ideal observer with model mismatch

NASA Astrophysics Data System (ADS)

Ghaly, Michael; Links, Jonathan M.; Frey, Eric

2015-03-01

In this work, we used the ideal observer (IO) and IO with model mismatch (IO-MM) applied in the projection domain and an anthropomorphic Channelized Hotelling Observer (CHO) applied to reconstructed images to optimize the acquisition energy window width and evaluate various scatter compensation methods in the context of a myocardial perfusion SPECT defect detection task. The IO has perfect knowledge of the image formation process and thus reflects performance with perfect compensation for image-degrading factors. Thus, using the IO to optimize imaging systems could lead to suboptimal parameters compared to those optimized for humans interpreting SPECT images reconstructed with imperfect or no compensation. The IO-MM allows incorporating imperfect system models into the IO optimization process. We found that with near-perfect scatter compensation, the optimal energy window for the IO and CHO were similar; in its absence the IO-MM gave a better prediction of the optimal energy window for the CHO using different scatter compensation methods. These data suggest that the IO-MM may be useful for projection-domain optimization when model mismatch is significant, and that the IO is useful when followed by reconstruction with good models of the image formation process.

Detection of microbial biofilms on food processing surfaces: hyperspectral fluorescence imaging study

NASA Astrophysics Data System (ADS)

Jun, Won; Kim, Moon S.; Chao, Kaunglin; Lefcourt, Alan M.; Roberts, Michael S.; McNaughton, James L.

2009-05-01

We used a portable hyperspectral fluorescence imaging system to evaluate biofilm formations on four types of food processing surface materials including stainless steel, polypropylene used for cutting boards, and household counter top materials such as formica and granite. The objective of this investigation was to determine a minimal number of spectral bands suitable to differentiate microbial biofilm formation from the four background materials typically used during food processing. Ultimately, the resultant spectral information will be used in development of handheld portable imaging devices that can be used as visual aid tools for sanitation and safety inspection (microbial contamination) of the food processing surfaces. Pathogenic E. coli O157:H7 and Salmonella cells were grown in low strength M9 minimal medium on various surfaces at 22 +/- 2 °C for 2 days for biofilm formation. Biofilm autofluorescence under UV excitation (320 to 400 nm) obtained by hyperspectral fluorescence imaging system showed broad emissions in the blue-green regions of the spectrum with emission maxima at approximately 480 nm for both E. coli O157:H7 and Salmonella biofilms. Fluorescence images at 480 nm revealed that for background materials with near-uniform fluorescence responses such as stainless steel and formica cutting board, regardless of the background intensity, biofilm formation can be distinguished. This suggested that a broad spectral band in the blue-green regions can be used for handheld imaging devices for sanitation inspection of stainless, cutting board, and formica surfaces. The non-uniform fluorescence responses of granite make distinctions between biofilm and background difficult. To further investigate potential detection of the biofilm formations on granite surfaces with multispectral approaches, principal component analysis (PCA) was performed using the hyperspectral fluorescence image data. The resultant PCA score images revealed distinct contrast between biofilms and granite surfaces. This investigation demonstrated that biofilm formations on food processing surfaces, even for background materials with heterogeneous fluorescence responses, can be detected. Furthermore, a multispectral approach in developing handheld inspection devices may be needed to inspect surface materials that exhibit non-uniform fluorescence.

Kinetic modeling of secondary organic aerosol formation: effects of particle- and gas-phase reactions of semivolatile products

NASA Astrophysics Data System (ADS)

Chan, A. W. H.; Kroll, J. H.; Ng, N. L.; Seinfeld, J. H.

2007-08-01

The distinguishing mechanism of formation of secondary organic aerosol (SOA) is the partitioning of semivolatile hydrocarbon oxidation products between the gas and aerosol phases. While SOA formation is typically described in terms of partitioning only, the rate of formation and ultimate yield of SOA can also depend on the kinetics of both gas- and aerosol-phase processes. We present a general equilibrium/kinetic model of SOA formation that provides a framework for evaluating the extent to which the controlling mechanisms of SOA formation can be inferred from laboratory chamber data. With this model we examine the effect on SOA formation of gas-phase oxidation of first-generation products to either more or less volatile species, of particle-phase reaction (both first- and second-order kinetics), of the rate of parent hydrocarbon oxidation, and of the extent of reaction of the parent hydrocarbon. The effect of pre-existing organic aerosol mass on SOA yield, an issue of direct relevance to the translation of laboratory data to atmospheric applications, is examined. The importance of direct chemical measurements of gas- and particle-phase species is underscored in identifying SOA formation mechanisms.

Kinetic modeling of Secondary Organic Aerosol formation: effects of particle- and gas-phase reactions of semivolatile products

NASA Astrophysics Data System (ADS)

Chan, A. W. H.; Kroll, J. H.; Ng, N. L.; Seinfeld, J. H.

2007-05-01

The distinguishing mechanism of formation of secondary organic aerosol (SOA) is the partitioning of semivolatile hydrocarbon oxidation products between the gas and aerosol phases. While SOA formation is typically described in terms of partitioning only, the rate of formation and ultimate yield of SOA can also depend on the kinetics of both gas- and aerosol-phase processes. We present a general equilibrium/kinetic model of SOA formation that provides a framework for evaluating the extent to which the controlling mechanisms of SOA formation can be inferred from laboratory chamber data. With this model we examine the effect on SOA formation of gas-phase oxidation of first-generation products to either more or less volatile species, of particle-phase reaction (both first- and second-order kinetics), of the rate of parent hydrocarbon oxidation, and of the extent of reaction of the parent hydrocarbon. The effect of pre-existing organic aerosol mass on SOA yield, an issue of direct relevance to the translation of laboratory data to atmospheric applications, is examined. The importance of direct chemical measurements of gas- and particle-phase species is underscored in identifying SOA formation mechanisms.

The effects of prostaglandin E2 in growing rats - Increased metaphyseal hard tissue and cortico-endosteal bone formation

NASA Technical Reports Server (NTRS)

Jee, W. S. S.; Ueno, K.; Deng, Y. P.; Woodbury, D. M.

1985-01-01

The role of in vivo prostaglandin E2 (PGE2) in bone formation is investigated. Twenty-five male Sprague-Dawley rats weighing between 223-267 g were injected subcutaneously with 0.3, 1.0, 3.0, and 6.0 mg of PGE2-kg daily for 21 days. The processing of the tibiae for observation is described. Radiographs and histomorphometric analyses are also utilized to study bone formation. Body weight, weights of soft tissues and bones morphometry are evaluated. It is observed that PGE2 depressed longitudinal bone growth, increased growth cartilage thickness, decreased degenerative cartilage cell size and cartilage cell production, and significantly increased proximal tibial metaphyseal hard tissue mass. The data reveal that periosteal bone formation is slowed down at higher doses of PGE2 and endosteal bone formation is slightly depressed less than 10 days post injection; however, here is a late increase (10 days after post injection) in endosteal bone formation and in the formation of trabecular bone in the marrow cavity of the tibial shaft. It is noted that the effects of PGE2 on bone formation are similar to the responses of weaning rats to PGE2.

Physical Property Evaluation of ZnO Thin Film Fabricated by Low-Temperature Process for Flexible Transparent TFT.

PubMed

Khafe, Adie Bin Mohd; Watanabe, Hiraku; Yamauchi, Hiroshi; Kuniyoshi, Shigekazu; Iizuka, Masaaki; Sakai, Masatoshi; Kudo, Kazuhiro

2016-04-01

The usual silicon-based display back planes require fairly high process temperature and thus the development of a low temperature process is needed on flexible plastic substrates. A new type of flexible organic light emitting transistor (OLET) had been proposed and investigated in the previous work. By using ultraviolet/ozone (UV/O3) assisted thermal treatments on wet processed zinc oxide field effect transistor (ZnO-FET), through low-process temperature, ZnO-FETs were fabricated which succeeded to achieve target drain current value and mobility. In this study, physical property evaluation of ZnO was conducted in term of their crystallinity, the increase composition of ZnO formed inside the thin film and the decrease of the carbon impurities originated from aqueous solution of the ZnO itself. The X-ray diffraction (XRD) evaluation showed UV/03 assisted thermal treatment has no obvious effect towards crystallinity of ZnO in the range of low process temperature. Moreover, through X-ray photoelectron spectroscopy (XPS) evaluation and Fourier transform infrared (FT-IR) spectroscopy evaluation, more carbon impurities disappeared from the ZnO thin film and the increase of composition amount of ZnO, when the thin film was subjected to UV/O3 assisted thermal treatment. Therefore, UV/O3 assisted thermal treatment contributed in carbon impurities elimination and accelerate ZnO formation in ZnO thin film, which led to the improvement in the electrical property of ZnO-FET in the low-process temperature.

Opportunities for increasing CO 2 storage in deep, saline formations by active reservoir management and treatment of extracted formation water: Case study at the GreenGen IGCC facility, Tianjin, PR China

DOE PAGES

Ziemkiewicz, Paul; Stauffer, Philip H.; Sullivan-Graham, Jeri; ...

2016-08-04

Carbon capture, utilization and storage (CCUS) seeks beneficial applications for CO 2 recovered from fossil fuel combustion. This study evaluated the potential for removing formation water to create additional storage capacity for CO 2, while simultaneously treating the produced water for beneficial use. Furthermore, the process would control pressures within the target formation, lessen the risk of caprock failure, and better control the movement of CO 2 within that formation. The project plans to highlight the method of using individual wells to produce formation water prior to injecting CO 2 as an efficient means of managing reservoir pressure. Because themore » pressure drawdown resulting from pre-injection formation water production will inversely correlate with pressure buildup resulting from CO 2 injection, it can be proactively used to estimate CO 2 storage capacity and to plan well-field operations. The project studied the GreenGen site in Tianjin, China where Huaneng Corporation is capturing CO 2 at a coal fired IGCC power plant. Known as the Tianjin Enhanced Water Recovery (EWR) project, local rock units were evaluated for CO 2 storage potential and produced water treatment options were then developed. Average treatment cost for produced water with a cooling water treatment goal ranged from 2.27 to 2.96 US$/m 3 (recovery 95.25%), and for a boiler water treatment goal ranged from 2.37 to 3.18 US$/m 3 (recovery 92.78%). Importance analysis indicated that water quality parameters and transportation are significant cost factors as the injection-extraction system is managed over time. Our study found that in a broad sense, active reservoir management in the context of CCUS/EWR is technically feasible. In addition, criteria for evaluating suitable vs. unsuitable reservoir properties, reservoir storage (caprock) integrity, a recommended injection/withdrawal strategy and cost estimates for water treatment and reservoir management are proposed.« less

Opportunities for increasing CO 2 storage in deep, saline formations by active reservoir management and treatment of extracted formation water: Case study at the GreenGen IGCC facility, Tianjin, PR China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ziemkiewicz, Paul; Stauffer, Philip H.; Sullivan-Graham, Jeri

Carbon capture, utilization and storage (CCUS) seeks beneficial applications for CO 2 recovered from fossil fuel combustion. This study evaluated the potential for removing formation water to create additional storage capacity for CO 2, while simultaneously treating the produced water for beneficial use. Furthermore, the process would control pressures within the target formation, lessen the risk of caprock failure, and better control the movement of CO 2 within that formation. The project plans to highlight the method of using individual wells to produce formation water prior to injecting CO 2 as an efficient means of managing reservoir pressure. Because themore » pressure drawdown resulting from pre-injection formation water production will inversely correlate with pressure buildup resulting from CO 2 injection, it can be proactively used to estimate CO 2 storage capacity and to plan well-field operations. The project studied the GreenGen site in Tianjin, China where Huaneng Corporation is capturing CO 2 at a coal fired IGCC power plant. Known as the Tianjin Enhanced Water Recovery (EWR) project, local rock units were evaluated for CO 2 storage potential and produced water treatment options were then developed. Average treatment cost for produced water with a cooling water treatment goal ranged from 2.27 to 2.96 US$/m 3 (recovery 95.25%), and for a boiler water treatment goal ranged from 2.37 to 3.18 US$/m 3 (recovery 92.78%). Importance analysis indicated that water quality parameters and transportation are significant cost factors as the injection-extraction system is managed over time. Our study found that in a broad sense, active reservoir management in the context of CCUS/EWR is technically feasible. In addition, criteria for evaluating suitable vs. unsuitable reservoir properties, reservoir storage (caprock) integrity, a recommended injection/withdrawal strategy and cost estimates for water treatment and reservoir management are proposed.« less

Mont Terri Underground Rock Laboratory, Switzerland-Research Program And Key Results

NASA Astrophysics Data System (ADS)

Nussbaum, C. O.; Bossart, P. J.

2012-12-01

Argillaceous formations generally act as aquitards because of their low hydraulic conductivities. This property, together with the large retention capacity of clays for cationic contaminants and the potential for self-sealing, has brought clay formations into focus as potential host rocks for the geological disposal of radioactive waste. Excavated in the Opalinus Clay formation, the Mont Terri underground rock laboratory in the Jura Mountains of NW Switzerland is an important international test site for researching clay formations. Research is carried out in the underground facility, which is located adjacent to the security gallery of the Mont Terri motorway tunnel. Fifteen partners from European countries, USA, Canada and Japan participate in the project. The objectives of the research program are to analyze the hydrogeological, geochemical and rock mechanical properties of the Opalinus Clay, to determine the changes induced by the excavation of galleries and by heating of the rock formation, to test sealing and container emplacement techniques and to evaluate and improve suitable investigation techniques. For the safety of deep geological disposal, it is of key importance to understand the processes occurring in the undisturbed argillaceous environment, as well as the processes in a disturbed system, during the operation of the repository. The objectives are related to: 1. Understanding processes and mechanisms in undisturbed clays and 2. Experiments related to repository-induced perturbations. Experiments of the first group are dedicated to: i) Improvement of drilling and excavation technologies and sampling methods; ii) Estimation of hydrogeological, rock mechanical and geochemical parameters of the undisturbed Opalinus Clay. Upscaling of parameters from laboratory to in situ scale; iii) Geochemistry of porewater and natural gases; evolution of porewater over time scales; iv) Assessment of long-term hydraulic transients associated with erosion and thermal scenarios and v) Evaluation of diffusion and retention parameters for long-lived radionuclides. Experiments related to repository-induced perturbations are focused on: i) Influence of rock liner on the disposal system and the buffering potential of the host rock; ii) Self-sealing processes in the excavation damaged zone; iii) Hydro-mechanical coupled processes (e.g. stress redistributions and pore pressure evolution during excavation); iv) Thermo-hydro-mechanical-chemical coupled processes (e.g. heating of bentonite and host rock) and v) Gas-induced transport of radionuclides in porewater and along interfaces in the engineered barrier system. A third research direction is to demonstrate the feasibility of repository construction and long-term safety after repository closure. Demonstration experiments can contribute to improving the reliability of the scientific basis for the safety assessment of future geological repositories, particularly if they are performed on a large scale and with a long duration. These experiments include the construction and installation of engineered barriers on a 1:1 scale: i) Horizontal emplacement of canisters; ii) Evaluation of the corrosion of container materials; repository re-saturation; iii) Sealing of boreholes and repository access tunnels and iv) Long-term monitoring of the repository. References Bossart, P. & Thury, M. (2008): Mont Terri Rock Laboratory. Project, Programme 1996 to 2007 and Results. - Rep. Swiss Geol. Surv. 3.

KEEPING A STEP AHEAD - FORMATIVE PHASE OF A WORKPLACE INTERVENTION TRIAL TO PREVENT OBESITY

PubMed Central

Zapka, Jane; Lemon, Stephenie C.; Estabrook, Barbara B.; Jolicoeur, Denise G.

2008-01-01

Background Ecological interventions hold promise for promoting overweight and obesity prevention in worksites. Given the paucity of evaluative research in the hospital worksite setting, considerable formative work is required for successful implementation and evaluation. Purpose This paper describes the formative phases of Step Ahead, a site-randomized controlled trial of a multi-level intervention that promotes physical activity and healthy eating in 6 hospitals in central Massachusetts. The purpose of the formative research phase was to increase the feasibility, effectiveness and likelihood of sustainability of the intervention. Design and Procedures The Step Ahead ecological intervention approach targets change at the organization, the interpersonal work environment and the individual levels. The intervention was developed using fundamental steps of intervention mapping and important tenets of participatory research. Formative research methods were used to engage leadership support and assistance and to develop an intervention plan that is both theoretically and practically grounded. This report uses observational data, program minutes and reports, and process tracking data. Developmental Strategies and Observations Leadership involvement (key informant interviews and advisory boards), employee focus groups and advisory boards, and quantitative environmental assessments cultivated participation and support. Determining multiple foci of change and designing measurable objectives and generic assessment tools to document progress are complex challenges encountered in planning phases. Lessons Learned Multi-level trials in diverse organizations require flexibility and balance of theory application and practice-based perspectives to affect impact and outcome objectives. Formative research is an essential component. PMID:18073339

Multiwell cell culture plate format with integrated microfluidic perfusion system

NASA Astrophysics Data System (ADS)

Domansky, Karel; Inman, Walker; Serdy, Jim; Griffith, Linda G.

2006-01-01

A new cell culture analog has been developed. It is based on the standard multiwell cell culture plate format but it provides perfused three-dimensional cell culture capability. The new capability is achieved by integrating microfluidic valves and pumps into the plate. The system provides a means to conduct high throughput assays for target validation and predictive toxicology in the drug discovery and development process. It can be also used for evaluation of long-term exposure to drugs or environmental agents or as a model to study viral hepatitis, cancer metastasis, and other diseases and pathological conditions.

Generalized Nuclear Data: A New Structure (with Supporting Infrastructure) for Handling Nuclear Data

NASA Astrophysics Data System (ADS)

Mattoon, C. M.; Beck, B. R.; Patel, N. R.; Summers, N. C.; Hedstrom, G. W.; Brown, D. A.

2012-12-01

The Evaluated Nuclear Data File (ENDF) format was designed in the 1960s to accommodate neutron reaction data to support nuclear engineering applications in power, national security and criticality safety. Over the years, the scope of the format has been extended to handle many other kinds of data including charged particle, decay, atomic, photo-nuclear and thermal neutron scattering. Although ENDF has wide acceptance and support for many data types, its limited support for correlated particle emission, limited numeric precision, and general lack of extensibility mean that the nuclear data community cannot take advantage of many emerging opportunities. More generally, the ENDF format provides an unfriendly environment that makes it difficult for new data evaluators and users to create and access nuclear data. The Cross Section Evaluation Working Group (CSEWG) has begun the design of a new Generalized Nuclear Data (or 'GND') structure, meant to replace older formats with a hierarchy that mirrors the underlying physics, and is aligned with modern coding and database practices. In support of this new structure, Lawrence Livermore National Laboratory (LLNL) has updated its nuclear data/reactions management package Fudge to handle GND structured nuclear data. Fudge provides tools for converting both the latest ENDF format (ENDF-6) and the LLNL Evaluated Nuclear Data Library (ENDL) format to and from GND, as well as for visualizing, modifying and processing (i.e., converting evaluated nuclear data into a form more suitable to transport codes) GND structured nuclear data. GND defines the structure needed for storing nuclear data evaluations and the type of data that needs to be stored. But unlike ENDF and ENDL, GND does not define how the data are to be stored in a file. Currently, Fudge writes the structured GND data to a file using the eXtensible Markup Language (XML), as it is ASCII based and can be viewed with any text editor. XML is a meta-language, meaning that it has a primitive set of definitions for representing hierarchical data/text in a file. Other meta-languages, like HDF5 which stores the data in binary form, can also be used to store GND in a file. In this paper, we will present an overview of the new GND data structures along with associated tools in Fudge.

The study of interrelationship between raw water quality parameters, chlorine demand and the formation of disinfection by-products

NASA Astrophysics Data System (ADS)

Abdullah, Md. Pauzi; Yee, Lim Fang; Ata, Sadia; Abdullah, Abass; Ishak, Basar; Abidin, Khairul Nidzham Zainal

Disinfection is the most crucial process in the treatment of drinking water supply and is the final barrier against bacteriological impurities in drinking water. Chlorine is the primary disinfectant used in the drinking water treatment process throughout Malaysia. However, the occurrence of various disinfection by-products such as trihalomethanes (THM) and haloacetic acids created a major issue on the potential health hazards which may pose adverse health effects in both human and animals. To simulate real water treatment conditions and to represent the conditions inherent in a tropical country, this study was performed at an urbanized water treatment plant with a daily production of about 549,000 m 3 of treated water. The purpose of this work is to examine the relationship between the water quality parameters in the raw water with chlorine demand and the formation of disinfection by-products. This study also investigated the possibility of the statistical model applications for the prediction of chlorine demand and the THM formation. Two models were developed to estimate the chlorine demand and the THM formation. For the statistical evaluation, correlation and simple linear regression analysis were conducted using SPSS. The results of Kolmogorov-Smirnov test for the estimation of goodness-of-fit of the dependent variables of the models to the normal distribution showed that all the dependent variables followed the normal distribution at significance level of 0.05. Good linear correlations were observed between the independent parameters and formation of THM and the chlorine demand. This study also revealed that ammonia and the specific ultraviolet absorbent (SUVA) were the function of chlorine consumption in the treatment process. Chlorine dosage and SUVA increase the yield of THM. Chlorine demand and THM formation was moderately sensitive, but significant to the pH. The level of significance ( α) for the statistical tests and the inclusion of a variable in the model was 0.05. A better understanding of these relationships will help the water utilities or plant operators to minimize the THM formation, providing a healthier and better drinking water quality as well as optimizing the chlorine dosage in the disinfection process.

Field pilot study on emissions, formations and distributions of PCDD/Fs from cement kiln co-processing fly ash from municipal solid waste incinerations.

PubMed

Liu, Guorui; Zhan, Jiayu; Zheng, Minghui; Li, Li; Li, Chunping; Jiang, Xiaoxu; Wang, Mei; Zhao, Yuyang; Jin, Rong

2015-12-15

A pilot study was performed to evaluate formation, distribution and emission of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from cement kilns that co-process fly ash from municipal solid waste incineration (MSWI). Stack gas and particulate samples from multiple stages in the process were collected and analyzed for PCDD/Fs. Stack emissions of PCDD/Fs were below the European Union limit for cement kilns (0.1 ng TEQ m(-3)). PCDD/F concentrations in particulates from the cyclone preheater outlet, suspension preheater boiler, humidifier tower, and back-end bag filter were much higher than in other samples, which suggests that these areas are the major sites of PCDD/F formation. Comparison of PCDD/F homolog and congener profiles from different stages suggested that tetra- and penta-chlorinated furans were mainly formed during cement kiln co-processing of MSWI fly ash. Three lower chlorinated furan congeners, including 2,3,7,8-tetrachlorodibenzofuran, 1,2,3,7,8-pentachlorodibenzo-p-dioxin and 2,3,4,7,8-pentachlorodibenzofuran, were identified as dominant contributors to the toxic equivalents (TEQ) of the PCDD/Fs. The concentration of PCDD/Fs in particulates was correlated with chloride content, which is consistent with its positive effect on PCDD/F formation. This could be mitigated by pretreating the feedstock to remove chloride and metals. Mass balance indicated that cement kilns eliminated about 94% of the PCDD/F TEQ input from the feedstock. Copyright © 2015 Elsevier B.V. All rights reserved.

A qualitative study on trainees' and supervisors' perceptions of assessment for learning in postgraduate medical education.

PubMed

Dijksterhuis, Marja G K; Schuwirth, Lambert W T; Braat, Didi D M; Teunissen, Pim W; Scheele, Fedde

2013-08-01

Recent changes in postgraduate medical training curricula usually encompass a shift towards more formative assessment, or assessment for learning. However, though theoretically well suited to postgraduate training, evidence is emerging that engaging in formative assessment in daily clinical practice is complex. We aimed to explore trainees' and supervisors' perceptions of what factors determine active engagement in formative assessment. Focus group study with postgraduate trainees and supervisors in obstetrics and gynaecology. Three higher order themes emerged: individual perspectives on feedback, supportiveness of the learning environment and the credibility of feedback and/or feedback giver. Engaging in formative assessment with a genuine impact on learning is complex and quite a challenge to both trainees and supervisors. Individual perspectives on feedback, a supportive learning environment and credibility of feedback are all important in this process. Every one of these should be taken into account when the utility of formative assessment in postgraduate medical training is evaluated.

ART-ML - a novel XML format for the biological procedures modeling and the representation of blood flow simulation.

PubMed

Karvounis, E C; Tsakanikas, V D; Fotiou, E; Fotiadis, D I

2010-01-01

The paper proposes a novel Extensible Markup Language (XML) based format called ART-ML that aims at supporting the interoperability and the reuse of models of blood flow, mass transport and plaque formation, exported by ARTool. ARTool is a platform for the automatic processing of various image modalities of coronary and carotid arteries. The images and their content are fused to develop morphological models of the arteries in easy to handle 3D representations. The platform incorporates efficient algorithms which are able to perform blood flow simulation. In addition atherosclerotic plaque development is estimated taking into account morphological, flow and genetic factors. ART-ML provides a XML format that enables the representation and management of embedded models within the ARTool platform and the storage and interchange of well-defined information. This approach influences in the model creation, model exchange, model reuse and result evaluation.

Development of a carbon formation reactor for carbon dioxide reduction

NASA Technical Reports Server (NTRS)

Noyes, G.

1985-01-01

Applied research, engineering development, and performance evaluation were conducted on a process for formation of dense carbon by pyrolysis of methane. Experimental research showed that dense (0.7 to 1.6 g/cc bulk density and 1.6 to 2.2 g/cc solid density) carbon can be produced by methane pyrolysis in quartzwool-packed quartz tubes at temperatrues of 1100 to 1300 C. This result supports the condensation theory of pyrolytic carbon formation from gaseous hydrocarbons. A full-scale Breadboard Carbon Formation Reactor (CFR) was designed, fabricated, and tested at 1100 to 1200 C with 380 to 2280 sccm input flows of methane. Single-pass conversion of methane to carbon ranged from 60 to 100 percent, with 89 percent average conversion. Performance was projected for an Advanced Carbon Reactor Subsystem (ACRS) which indicated that the ACRS is a viable option for management of metabolic carbon on long-duration space missions.

Development program to produce mullite fiber insulation

NASA Technical Reports Server (NTRS)

Long, W. G.

1975-01-01

Processing methods were utilized to form a mullite fiber-Kaowool felt. The formation of a blended felt using the Rotoformer wet-laying method was successful. Felt products were evaluated for tensile strength, thermal stability, thermal conductivity and structural integrity at 1259 C and 1371 C. Textile processing methods failed in an attempt to form a yarn from staple and multifilament mullite fiber due to fiber damage through mechanical handling. The refractoriness of pure Kaowool ceramic fiber is improved with additions of 30% or greater mullite fiber.

An adaptive community-based participatory approach to formative assessment with high schools for obesity intervention*.

PubMed

Kong, Alberta S; Farnsworth, Seth; Canaca, Jose A; Harris, Amanda; Palley, Gabriel; Sussman, Andrew L

2012-03-01

In the emerging debate around obesity intervention in schools, recent calls have been made for researchers to include local community opinions in the design of interventions. Community-based participatory research (CBPR) is an effective approach for forming community partnerships and integrating local opinions. We used CBPR principles to conduct formative research in identifying acceptable and potentially sustainable obesity intervention strategies in 8 New Mexico school communities. We collected formative data from 8 high schools on areas of community interest for school health improvement through collaboration with local School Health Advisory Councils (SHACs) and interviews with students and parents. A survey based on formative results was created to assess acceptability of specific intervention strategies and was provided to SHACs. Quantitative data were analyzed using descriptive statistics while qualitative data were evaluated using an iterative analytic process for thematic identification. Key themes identified through the formative process included lack of healthy food options, infrequent curricular/extracurricular physical activity opportunities, and inadequate exposure to health/nutritional information. Key strategies identified as most acceptable by SHAC members included healthier food options and preparation, a healthy foods marketing campaign, yearly taste tests, an after-school noncompetitive physical activity program, and community linkages to physical activity opportunities. An adaptive CBPR approach for formative assessment can be used to identify obesity intervention strategies that address community school health concerns. Eight high school SHACs identified 6 school-based strategies to address parental and student concerns related to obesity. © 2012, American School Health Association.

An Adaptive Community-Based Participatory Approach to Formative Assessment With High Schools for Obesity Intervention*

PubMed Central

Kong, Alberta S.; Farnsworth, Seth; Canaca, Jose A.; Harris, Amanda; Palley, Gabriel; Sussman, Andrew L.

2013-01-01

BACKGROUND In the emerging debate around obesity intervention in schools, recent calls have been made for researchers to include local community opinions in the design of interventions. Community-based participatory research (CBPR) is an effective approach for forming community partnerships and integrating local opinions. We used CBPR principles to conduct formative research in identifying acceptable and potentially sustainable obesity intervention strategies in 8 New Mexico school communities. METHODS We collected formative data from 8 high schools on areas of community interest for school health improvement through collaboration with local School Health Advisory Councils (SHACs) and interviews with students and parents. A survey based on formative results was created to assess acceptability of specific intervention strategies and was provided to SHACs. Quantitative data were analyzed using descriptive statistics while qualitative data were evaluated using an iterative analytic process for thematic identification. RESULTS Key themes identified through the formative process included lack of healthy food options, infrequent curricular/extracurricular physical activity opportunities, and inadequate exposure to health/nutritional information. Key strategies identified as most acceptable by SHAC members included healthier food options and preparation, a healthy foods marketing campaign, yearly taste tests, an after-school noncompetitive physical activity program, and community linkages to physical activity opportunities. CONCLUSION An adaptive CBPR approach for formative assessment can be used to identify obesity intervention strategies that address community school health concerns. Eight high school SHACs identified 6 school-based strategies to address parental and student concerns related to obesity. PMID:22320339

Mechanisms of fenthion activation in rainbow trout (Oncorhynchus mykiss) acclimated to hypersaline environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lavado, Ramon; Rimoldi, John M.; Schlenk, Daniel

2009-03-01

Previous studies in rainbow trout have shown that acclimation to hypersaline environments enhances the toxicity to thioether organophosphate and carbamate pesticides. In order to determine the role of biotransformation in this process, the metabolism of the thioether organophosphate biocide, fenthion was evaluated in microsomes from gills, liver and olfactory tissues in rainbow trout (Oncorhynchus mykiss) acclimated to freshwater and 17 per mille salinity. Hypersalinity acclimation increased the formation of fenoxon and fenoxon sulfoxide from fenthion in liver microsomes from rainbow trout, but not in gills or in olfactory tissues. NADPH-dependent and independent hydrolysis was observed in all tissues, but onlymore » NADPH-dependent fenthion cleavage was differentially modulated by hypersalinity in liver (inhibited) and gills (induced). Enantiomers of fenthion sulfoxide (65% and 35% R- and S-fenthion sulfoxide, respectively) were formed in liver and gills. The predominant pathway of fenthion activation in freshwater appears to be initiated through initial formation of fenoxon which may be subsequently converted to the most toxic metabolite fenoxon R-sulfoxide. However, in hypersaline conditions both fenoxon and fenthion sulfoxide formation may precede fenoxon sulfoxide formation. Stereochemical evaluation of sulfoxide formation, cytochrome P450 inhibition studies with ketoconazole and immunoblots indicated that CYP3A27 was primarily involved in the enhancement of fenthion activation in hypersaline-acclimated fish with limited contribution of FMO to initial sulfoxidation.« less

The increase of apatite layer formation by the poly(3-hydroxybutyrate) surface modification of hydroxyapatite and β-tricalcium phosphate.

PubMed

Szubert, M; Adamska, K; Szybowicz, M; Jesionowski, T; Buchwald, T; Voelkel, A

2014-01-01

The aim of this study was the surface modification of hydroxyapatite and β-tricalcium phosphate by poly(3-hydroxybutyrate) grafting and characterization of modificates. The bioactivity examination was carried out by the determination to grow an apatite layer on modified materials during incubation in simulated body fluid at 37°C. The additional issue taken up in this paper was to investigate the influence of fluid replacement. The process of the surface modification of biomaterials was evaluated by means of infrared and Raman spectroscopy. Formation of the apatite layer was assessed by means of scanning electron microscopy and confirmed by energy dispersive, Raman and Fourier transformed infrared spectroscopy. During exposure in simulated body fluid, the variation of the zeta potential, pH measurement and relative weight was monitored. Examination of scanning electron microscopy micrographs suggests that modification of hydroxyapatite and β-tricalcium phosphate by poly(3-hydroxybutyrate) significantly increases apatite layer formation. Raman spectroscopy evaluation revealed that the formation of the apatite layer was more significant in the case of hydroxyapatite modificate, when compared to the β-tricalcium phosphate modificate. Both modificates were characterized by stable pH, close to the natural pH of human body fluids. Furthermore, we have shown that a weekly changed, simulated body fluid solution increases apatite layer formation. © 2013.

FORMULATION OF NON-STEADY-STATE DUST FORMATION PROCESS IN ASTROPHYSICAL ENVIRONMENTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nozawa, Takaya; Kozasa, Takashi, E-mail: takaya.nozawa@ipmu.jp

2013-10-10

The non-steady-state formation of small clusters and the growth of grains accompanied by chemical reactions are formulated under the consideration that the collision of key gas species (key molecule) controls the kinetics of dust formation process. The formula allows us to evaluate the size distribution and condensation efficiency of dust formed in astrophysical environments. We apply the formulation to the formation of C and MgSiO{sub 3} grains in the ejecta of supernovae, as an example, to investigate how the non-steady effect influences the formation process, condensation efficiency f{sub con,{sub ∞}}, and average radius a{sub ave,{sub ∞}} of newly formed grainsmore » in comparison with the results calculated with the steady-state nucleation rate. We show that the steady-state nucleation rate is a good approximation if the collision timescale of key molecule τ{sub coll} is much smaller than the timescale τ{sub sat} with which the supersaturation ratio increases; otherwise the effect of the non-steady state becomes remarkable, leading to a lower f{sub con,{sub ∞}} and a larger a{sub ave,{sub ∞}}. Examining the results of calculations, we reveal that the steady-state nucleation rate is applicable if the cooling gas satisfies Λ ≡ τ{sub sat}/τ{sub coll} ∼> 30 during the formation of dust, and find that f{sub con,{sub ∞}} and a{sub ave,{sub ∞}} are uniquely determined by Λ{sub on} at the onset time t{sub on} of dust formation. The approximation formulae for f{sub con,{sub ∞}} and a{sub ave,{sub ∞}} as a function of Λ{sub on} could be useful in estimating the mass and typical size of newly formed grains from observed or model-predicted physical properties not only in supernova ejecta but also in mass-loss winds from evolved stars.« less

Nondestructive damage evaluation in ceramic matrix composites for aerospace applications.

PubMed

Dassios, Konstantinos G; Kordatos, Evangelos Z; Aggelis, Dimitrios G; Matikas, Theodore E

2013-01-01

Infrared thermography (IRT) and acoustic emission (AE) are the two major nondestructive methodologies for evaluating damage in ceramic matrix composites (CMCs) for aerospace applications. The two techniques are applied herein to assess and monitor damage formation and evolution in a SiC-fiber reinforced CMC loaded under cyclic and fatigue loading. The paper explains how IRT and AE can be used for the assessment of the material's performance under fatigue. IRT and AE parameters are specifically used for the characterization of the complex damage mechanisms that occur during CMC fracture, and they enable the identification of the micromechanical processes that control material failure, mainly crack formation and propagation. Additionally, these nondestructive parameters help in early prediction of the residual life of the material and in establishing the fatigue limit of materials rapidly and accurately.

Analysis and evaluation of processes and equipment in tasks 2 and 4 of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1978-01-01

Several experimental and projected Czochralski crystal growing process methods were studied and compared to available operations and cost-data of recent production Cz-pulling, in order to elucidate the role of the dominant cost contributing factors. From this analysis, it becomes apparent that the specific add-on costs of the Cz-process can be expected to be reduced by about a factor of three by 1982, and about a factor of five by 1986. A format to guide in the accumulation of the data needed for thorough techno-economic analysis of solar cell production processes was developed.

A Formative Evaluation of Two Evidence-Based Psychotherapies for PTSD In VA Residential Treatment Programs

PubMed Central

Cook, Joan M.; O’Donnell, Casey; Dinnen, Stephanie; Bernardy, Nancy; Rosenheck, Robert; Desai, Rani

2013-01-01

Thirty-eight U.S. Department of Veterans Affairs (VA) residential treatment programs for posttraumatic stress disorder (PTSD) participated in a formative evaluation of their programmatic services, including evidenced-based treatments (EBTs), between July 2008 and March 2011. Face-to-face qualitative interviews were conducted with over 250 staff by an independent psychologist along with on-site participant observations. This evaluation coincided with a national VA dissemination initiative to train providers in two EBTs for PTSD, Prolonged Exposure (PE) and Cognitive Processing Therapy (CPT). A substantial proportion of eligible (based on professional background) residential treatment providers received training in PE (37.4%) or CPT (64.2%), with 9.5% completing case consultation or becoming national trainers in each therapy respectively. In semi-structured interviews, providers reported that their clinical programs had adopted these EBTs at varying levels ranging from no adoption to every patient receiving the full protocol. Suggestions for improving the adoption of PE and CPT are noted, including distilling manualized treatments to essential common elements. PMID:23417875

Formative evaluation of AARP's Active for Life campaign to improve walking and bicycling environments in two cities.

PubMed

Emery, James; Crump, Carolyn; Hawkins, Margaret

2007-10-01

AARP conducted a 2.5-year social-marketing campaign to improve physical activity levels among older adults in Richmond, Virginia and Madison, Wisconsin. This article presents formative evaluation findings from the campaign's policy/environmental change component. Evaluation data were abstracted from technical-assistance documentation and telephone interviews. Results include 11 policy and 14 environmental changes attained or in-process by campaign closure. Differences between the cities' results are explained through differences in program implementation (e.g., types of changes planned, formalization of partnerships). Project teams took less time deciding to pursue policy change than environmental change; however, planning the policy activities took longer than planning environmental-change activities. Recommendations for future policy/environmental change interventions focus on the selection of strategies; planning for administrative resources; formalizing partnerships to ensure sustainability of impact; ensuring training and technical assistance; and documenting progress. Similar intervention results may be attainable with a multi-year timeframe, adequate part-time coordination, and committed volunteers.

Implementation of nursing process in clinical settings: the case of three governmental hospitals in Ethiopia, 2017.

PubMed

Semachew, Ayele

2018-03-13

The purpose of this survey was to evaluate the implementation of the nursing process at three randomly selected governmental hospitals found in Amhara Region North West Ethiopia. From the total 338 reviewed documents, 264 (78.1%) have a nursing process format attached with the patient's profile/file, 107 (31.7%) had no nursing diagnosis, 185 (54.7%) of nurses stated their plan of care based on priority, 173 (51.2%) of nurses did not document their interventions based on plan and 179 (53.0%) of nurses did not evaluate their interventions. The overall implementation of nursing process among Felege Hiwot Referal hospital, Debretabor general hospital and Finoteselam general hospitals were 49.12, 68.18, and 69.42% respectively. Nursing professionals shall improve documentation required in implementing the nursing process. Nursing managers (matron, ward heads) shall supervise the overall implementation of nursing process. Hospital nursing services managers (matrons) shall arrange and facilitate case presentations by the nursing staffs which focus on documentation and updates on nursing process. Hospitals need to establish and support nursing process coordinating staff in their institution.

Information Comparisons in Example-Based Hypermedia Environments: Supporting Learners with Processing Prompts and an Interactive Comparison Tool

ERIC Educational Resources Information Center

Gerjets, Peter; Scheiter, Katharina; Schuh, Julia

2008-01-01

Global comparisons of learning from hypertext/hypermedia and traditional presentation formats like text have yet failed to show major advantages concerning the effectiveness of hypermedia learning. Thus, it is proposed in the current paper to evaluate hypermedia environments more specifically with regard to their potential to implement and support…

Testing the Role of p21-Activated Kinases in Schwannoma Formation Using a Novel Genetically Engineered Murine Model that Closely Phenocopies Human NF2 Disease

DTIC Science & Technology

2015-06-01

preclinical models of NF1? Can whole kinome analysis predict pathways for drug resistance in treated mice? Procuring Contracting/Grants Officer: Emily...cells. b) Evaluate transduction of hydroxyethyl starch (HES)-processed hematopoietic cells. c) Monitor gene transfer in primary FANCC-/- progenitors

Evaluations of Students on Facebook as an Educational Environment

ERIC Educational Resources Information Center

Coklar, Ahmet Naci

2012-01-01

Taking cognizance of the transformation experienced in education technologies, the concept that comes into prominence in integration of ICTs to education process at present is web 2.0. The main philosophy of web 2.0 technologies is its contribution to content formation of users and high-level interaction between users. One of web 2.0 technologies…

Protein Degradation by Ubiquitin-Proteasome System in Formation and Labilization of Contextual Conditioning Memory

ERIC Educational Resources Information Center

Fustiñana, María Sol; de la Fuente, Verónica; Federman, Noel; Freudenthal, Ramiro; Romano, Arturo

2014-01-01

The ubiquitin-proteasome system (UPS) of protein degradation has been evaluated in different forms of neural plasticity and memory. The role of UPS in such processes is controversial. Several results support the idea that the activation of this system in memory consolidation is necessary to overcome negative constrains for plasticity. In this…

Summative and Formative Evaluations, National Skill Standards Project. Prepared for the National Grocers Association.

ERIC Educational Resources Information Center

Hamm, Michael S.

In 1993-1996, the Grocers Research and Educational Foundation of the National Grocers Association developed entry-level skill standards for the food marketing industry. A coalition formed early in the project directed the skill standard development process and solicited input from major organizations involved in the industry. The validity of the…

A Qualitative Case Study of Strategies for Choosing and Evaluating Alternative Assessments in Online Higher Education

ERIC Educational Resources Information Center

Streff, Robert James

2016-01-01

Studies have shown that not all students are assessed effectively using standard testing formats. However, it is unclear what alternative methodology would be useful to determine whether students have acquired the skills necessary for today's global market. This research study's purpose was to understand the processes instructors use when choosing…

Natural Catalysts for Molten Cellulose Pyrolysis to Targeted Bio-Oils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dauenhauer, Paul J.

2017-06-02

Catalysis of biomass biopolymer cellulose by alkaline earth metals is a fundamental chemistry relevant to energy processes including combustion, pyrolysis and gasification. In this work, the catalytic decomposition of cellulose by calcium ions was evaluated at high temperature (400-500°C) to elucidate the chemical mechanisms leading to the formation of volatile organic compounds.

Numerical evaluation of a sensible heat balance method to determine rates of soil freezing and thawing

USDA-ARS?s Scientific Manuscript database

In-situ determination of ice formation and thawing in soils is difficult despite its importance for many environmental processes. A sensible heat balance (SHB) method using a sequence of heat pulse probes has been shown to accurately measure water evaporation in subsurface soil, and it has the poten...

Time Sequence Evaluation of Biliary Stent Occlusion by Dissection Analysis of Retrieved Stents.

PubMed

Kwon, Chang-Il; Gromski, Mark A; Sherman, Stuart; Easler, Jeffrey J; El Hajj, Ihab I; Watkins, James; Fogel, Evan L; McHenry, Lee; Lehman, Glen A

2016-08-01

Multiple factors can affect the occlusion of plastic stents. Previous data demonstrate that side holes may induce more biofilm formation probably via microturbulence and bile flow disturbances that could lead to occlusion. These results, however, have not been replicated in subsequent clinical studies with different methods. The objective of this study is to evaluate the physical characteristics of plastic stent occlusion over time. This is a plastic stent sequential analysis study. Biliary stents removed via ERCP from February 24, 2015, to June 2, 2015, were included. One hundred and forty-eight retrieved straight-type plastic stents were longitudinally cut by a custom-made cutting device. These dissected stents were then evaluated in detail with regard to the location of stent occlusion and the stent patency period. Location of stent occlusive debris was the primary outcome in this study. Biofilm formations and occlusions by debris were sequentially but separately tallied. Biofilm formations were initially seen around the side hole areas within 30 days and spread to the entire stent by 60 days. Then, occlusion process by debris was mainly initiated by 80 days and progressed to full occlusion by median of 90 days. Although some occlusions were also observed around the side hole areas within 30 days, affected areas were more widely observed after biofilm formation. This study is the first to attempt to describe the distribution of stent occlusions over time. These observations may help guide future stent development.

Formation of hydroxymethylfurfural in domestic high-fructose corn syrup and its toxicity to the honey bee (Apis mellifera).

PubMed

LeBlanc, Blaise W; Eggleston, Gillian; Sammataro, Diana; Cornett, Charles; Dufault, Renee; Deeby, Thomas; St Cyr, Eldwin

2009-08-26

In the United States, high-fructose corn syrup (HFCS) has become a sucrose replacement for honey bees and has widespread use as a sweetener in many processed foods and beverages for human consumption. It is utilized by commercial beekeepers as a food for honey bees for several reasons: to promote brood production, after bees have been moved for commercial pollination, and when field-gathered nectar sources are scarce. Hydroxymethylfurfural (HMF) is a heat-formed contaminant and is the most noted toxin to honey bees. Currently, there are no rapid field tests that would alert beekeepers of dangerous levels of HMF in HFCS or honey. In this study, the initial levels and the rates of formation of HMF at four temperatures were evaluated in U.S.-available HFCS samples. Different HFCS brands were analyzed and compared for acidity and metal ions by inductively coupled plasma mass spectroscopy. Levels of HMF in eight HFCS products were evaluated over 35 days, and the data were fit to polynomial and exponential equations, with excellent correlations. The data can be used by beekeepers to predict HMF formation on storage. Caged bee studies were conducted to evaluate the HMF dose-response effect on bee mortality. Finally, commercial bases such as lime, potash, and caustic soda were added to neutralize hydronium ion in HMF samples, and the rates of HMF formation were compared at 45 degrees C.

Hydraulic experimental investigation on spatial distribution and formation process of tsunami deposit on a slope

NASA Astrophysics Data System (ADS)

Harada, K.; Takahashi, T.; Yamamoto, A.; Sakuraba, M.; Nojima, K.

2017-12-01

An important aim of the study of tsunami deposits is to estimate the characteristics of past tsunamis from the tsunami deposits found locally. Based on the tsunami characteristics estimated from tsunami deposit, it is possible to examine tsunami risk assessment in coastal areas. It is considered that tsunami deposits are formed based on the dynamic correlation between tsunami's hydraulic values, sediment particle size, topography, etc. However, it is currently not enough to evaluate the characteristics of tsunamis from tsunami deposits. This is considered to be one of the reasons that the understanding of the formation process of tsunami deposits is not sufficiently understood. In this study, we analyze the measurement results of hydraulic experiment (Yamamoto et al., 2016) and focus on the formation process and distribution of tsunami deposits. Hydraulic experiment was conducted with two-dimensional water channel with a slope. Tsunami was inputted as a bore wave flow. The moving floor section was installed as a seabed slope connecting to shoreline and grain size distribution was set some cases. The water level was measured using ultrasonic displacement gauges, and the flow velocity was measured using propeller current meters and an electromagnetic current meter. The water level and flow velocity was measured at some points. The distribution of tsunami deposit was measured from shoreline to run-up limit on the slope. Yamamoto et al. (2016) reported the measurement results on the distribution of tsunami deposit with wave height and sand grain size. Therefore, in this study, hydraulic analysis of tsunami sediment formation process was examined based on the measurement data. Time series fluctuation of hydraulic parameters such as Froude number, Shields number, Rouse number etc. was calculated to understand on the formation process of tsunami deposit. In the front part of the tsunami, the flow velocity take strong flow from shoreline to around the middle of slope. From the measurement result in this time, it is considered that the dominant process of deposit formation is suspended state. At the run-up limit where the flow velocity decreases, the sediment moves in bedload state. As a result, the amount of sediment transport near the run-up limit changes under the influence of particle size.

[Control on products of NDMA degradation by UV/O3].

PubMed

Xu, Bing-bing; Chen, Zhong-lin; Qi, Fei; Yang, Lei; Huang, Lu-xi

2008-12-01

Comparison experiments of two advanced oxidation processes, UV/O3 and UV/H2O2, were carried out to evaluate their degradation effect of N-nitrosodimethylamine (NDMA) and controlling effect of dimethylamine (DMA) formation. The results showed that UV/H2O2 could enhance NDMA degradation, but could not control on the formation of DMA. UV/O3 was not only effective for NDMA degradation, but also was good at controlling on DMA formation. Furthermore, factors affecting the formation of DMA during degradation of NDMA by UV/O3 were studied. The formation of DMA decreased with O3 dosage increasing and DMA was 0.98 mg x L(-1) with 7.7 mg x L(-1) NDMA and 6.64 mg x L(-1) O3 dose. Solution pH had obvious effect on controlling of DMA formation during degradation of NDMA by UV/O3 . The formation of DMA lightly increased with pH increasing from acid to neutral but dramatically decreased in basic aqueous solution. The formation of DMA was only 0.3 mg x L(-1) when the initial concentration of NDMA was 7.7 mg x L(-1) under pH = 11.0 condition. UV/O3 had better controlling of DMA formation with lesser initial concentration of NDMA.

An evaluation of the effect of JPEG, JPEG2000, and H.264/AVC on CQR codes decoding process

NASA Astrophysics Data System (ADS)

Vizcarra Melgar, Max E.; Farias, Mylène C. Q.; Zaghetto, Alexandre

2015-02-01

This paper presents a binarymatrix code based on QR Code (Quick Response Code), denoted as CQR Code (Colored Quick Response Code), and evaluates the effect of JPEG, JPEG2000 and H.264/AVC compression on the decoding process. The proposed CQR Code has three additional colors (red, green and blue), what enables twice as much storage capacity when compared to the traditional black and white QR Code. Using the Reed-Solomon error-correcting code, the CQR Code model has a theoretical correction capability of 38.41%. The goal of this paper is to evaluate the effect that degradations inserted by common image compression algorithms have on the decoding process. Results show that a successful decoding process can be achieved for compression rates up to 0.3877 bits/pixel, 0.1093 bits/pixel and 0.3808 bits/pixel for JPEG, JPEG2000 and H.264/AVC formats, respectively. The algorithm that presents the best performance is the H.264/AVC, followed by the JPEG2000, and JPEG.

Nuclide radioactive decay data uncertainties library

NASA Astrophysics Data System (ADS)

Barabanova, D. S.; Zherdev, G. M.

2017-01-01

The results of the developing the library of uncertainties of radioactive decay data in the ABBN data library format are described. Different evaluations of uncertainties were compared and their effects on the results of calculations of residual energy release were determined using the test problems and experiment. Tables were generated in the ABBN format with the data obtained on the basis of libraries in ENDF-6 format. 3821 isotopes from the ENDF/B-7 data library, 3852 isotopes from the JEFF-3.11 data library and 1264 isotopes from the JENDL-4.0 data library were processed. It was revealed that the differences in the evaluations accepted in different decay data libraries are not so big, although they sometimes exceed the uncertainties assigned to the data in the ENDF/B-7 and JEFF-3.11 libraries, which as a rule, they agree with each other. On the basis of developed method it is supposed to create a library of data uncertainties for radioactive decay within the constant data system in FSUE RFNC-VNIIEF with its further connection with CRYSTAL module.

The Fragility of Individual-Based Explanations of Social Hierarchies: A Test Using Animal Pecking Orders

PubMed Central

2016-01-01

The standard approach in accounting for hierarchical differentiation in biology and the social sciences considers a hierarchy as a static distribution of individuals possessing differing amounts of some valued commodity, assumes that the hierarchy is generated by micro-level processes involving individuals, and attempts to reverse engineer the processes that produced the hierarchy. However, sufficient experimental and analytical results are available to evaluate this standard approach in the case of animal dominance hierarchies (pecking orders). Our evaluation using evidence from hierarchy formation in small groups of both hens and cichlid fish reveals significant deficiencies in the three tenets of the standard approach in accounting for the organization of dominance hierarchies. In consequence, we suggest that a new approach is needed to explain the organization of pecking orders and, very possibly, by implication, for other kinds of social hierarchies. We develop an example of such an approach that considers dominance hierarchies to be dynamic networks, uses dynamic sequences of interaction (dynamic network motifs) to explain the organization of dominance hierarchies, and derives these dynamic sequences directly from observation of hierarchy formation. We test this dynamical explanation using computer simulation and find a good fit with actual dynamics of hierarchy formation in small groups of hens. We hypothesize that the same dynamic sequences are used in small groups of many other animal species forming pecking orders, and we discuss the data required to evaluate our hypothesis. Finally, we briefly consider how our dynamic approach may be generalized to other kinds of social hierarchies using the example of the distribution of empty gastropod (snail) shells occupied in populations of hermit crabs. PMID:27410230

Chemical and toxicological evaluation of transformation products during advanced oxidation processes.

PubMed

vom Eyser, C; Börgers, A; Richard, J; Dopp, E; Janzen, N; Bester, K; Tuerk, J

2013-01-01

The entry of pharmaceuticals into the water cycle from sewage treatment plants is of growing concern because environmental effects are evident at trace levels. Ozonation, UV- and UV/H(2)O(2)-treatment were tested as an additional step in waste water treatment because they have been proven to be effective in eliminating aqueous organic contaminants. The pharmaceuticals carbamazepine, ciprofloxacin, diclofenac, metoprolol and sulfamethoxazole as well as the personal care products galaxolide and tonalide were investigated in terms of degradation efficiency and by-product formation in consideration of toxic effects. The substances were largely removed from treatment plant effluent by ozonation, UV- and UV/H(2)O(2)-treatment. Transformation products were detected in all tested treatment processes. Accompanying analysis showed no genotoxic, cytotoxic or estrogenic potential for the investigated compounds after oxidative treatment of real waste waters. The results indicate that by-product formation from ozonation and advanced oxidation processes does not have any negative environmental impact.

Simultaneous synthesis and self-assembly of inorganic nanomaterials towards active and stable nanocatalysts

NASA Astrophysics Data System (ADS)

Yao, Zhou

The synthetic process in which the formation of nanoparticles and the self-assembly of those nanoparticles as building blocks are coupled together represents an efficient strategy towards stable nanostructures with relatively large geometric dimensions, well-defined shapes, structural hierarchicy and desirable porosities. In this dissertation, through employing appropriate soft/hard templates and controlling the reaction kinetics and thermodynamics, a series of novel physicochemical processes were developed to generate a wide variety of hierarchical 1D, 2D and 3D nanostructures with complex chemical compositions, structural integrities and/or porosities, which were then evaluated as electrocatalysts, heterogeneous catalysts and adsorbents. Based on the properties of their chemical compositions and potential applications, two types of inorganic nanostructures were obtained, including the noble metal-based nanostructures which could be employed as electrocatalysts and the Al-silicate-based hierarchical nanocomposites which could be used for preparation of supported nanocatalysts. The formation mechanisms underlying different processes are also well investigated.

The heuristic-analytic theory of reasoning: extension and evaluation.

PubMed

Evans, Jonathan St B T

2006-06-01

An extensively revised heuristic-analytic theory of reasoning is presented incorporating three principles of hypothetical thinking. The theory assumes that reasoning and judgment are facilitated by the formation of epistemic mental models that are generated one at a time (singularity principle) by preconscious heuristic processes that contextualize problems in such a way as to maximize relevance to current goals (relevance principle). Analytic processes evaluate these models but tend to accept them unless there is good reason to reject them (satisficing principle). At a minimum, analytic processing of models is required so as to generate inferences or judgments relevant to the task instructions, but more active intervention may result in modification or replacement of default models generated by the heuristic system. Evidence for this theory is provided by a review of a wide range of literature on thinking and reasoning.

A new study of the kinetics of curd production in the process of cheese manufacture.

PubMed

Muñoz, Susana Vargas; Torres, Maykel González; Guerrero, Francisco Quintanilla; Talavera, Rogelio Rodríguez

2017-11-01

We studied the role played by temperature and rennet concentration in the coagulation process for cheese manufacture and the evaluation of their kinetics. We concluded that temperature is the main factor that determines the kinetics. The rennet concentration was unimportant probably due to the fast action of the enzyme chymosin. The Dynamic light scattering technique allowed measuring the aggregate's size and their formation kinetics. The volume fraction of solids was determined from viscosity measurements, showing profiles that are in agreement with the size profiles. The results indicate that the formation of the aggregates for rennet cheese is strongly dependent on temperature and rennet concentration. The results revealed that at 35·5 °C the volume fraction of solids has the maximum slope, indicating that at this temperature the curd is formed rapidly. The optimal temperature throughout the process was established. Second-order kinetics were obtained for the process. We observed a quadratic dependence between the rennet volume and the volume fraction of solids (curd), thereby indicating that the kinetics of the curd production should be of order two.

Perception Of "Features" And "Objects": Applications To The Design Of Instrument Panel Displays

NASA Astrophysics Data System (ADS)

Poynter, Douglas; Czarnomski, Alan J.

1988-10-01

An experiment was conducted to determine whether socalled feature displays allow for faster and more accurate processing compared to object displays. Previous psychological studies indicate that features can be processed in parallel across the visual field, whereas objects must be processed one at a time with the aid of attentional focus. Numbers and letters are examples of objects; line orientation and color are examples of features. In this experiment, subjects were asked to search displays composed of up to 16 elements for the presence of specific elements. The ability to detect, localize, and identify targets was influenced by display format. Digital errors increased with the number of elements, the number of targets, and the distance of the target from the fixation point. Line orientation errors increased only with the number of targets. Several other display types were evaluated, and each produced a pattern of errors similar to either digital or line orientation format. Results of the study were discussed in terms of Feature Integration Theory, which distinguishes between elements that are processed with parallel versus serial mechanisms.

Secondary organic aerosol formation through cloud processing of aromatic VOCs

NASA Astrophysics Data System (ADS)

Herckes, P.; Hutchings, J. W.; Ervens, B.

2010-12-01

Field observations have shown substantial concentrations (20-5,500 ng L-1) of aromatic volatile organic compounds (VOC) in cloud droplets. The potential generation of secondary organic aerosol mass through the processing of these anthropogenic VOCs was investigated through laboratory and modeling studies. Under simulated atmospheric laboratory conditions, in idealized solutions, benzene, toluene, ethylbenzene, and xylene (BTEX) degraded quickly in the aqueous phase. The degradation process yielded less volatile products which would contribute to new aerosol mass upon cloud evaporation. However, when realistic cloud solutions containing natural organic matter were used in the experiments, the reaction rates decreased with increasing organic carbon content. Kinetic data derived from these experiments were used as input to a multiphase box model in order to evaluate the secondary organic aerosol (SOA) mass formation potential of cloud processing of BTEX. Model results will be presented that quantify the SOA amounts from these aqueous phase pathways. The efficiency of this multiphase SOA source will be compared to SOA yields from the same aromatics as treated in traditional SOA models that are restricted to gas phase oxidation and subsequent condensation on particles.

RELATIONSHIP FORMATION AND STABILITY IN EMERGING ADULTHOOD: DO SEX RATIOS MATTER?

PubMed Central

Warner, Tara D.; Manning, Wendy D.; Giordano, Peggy C.; Longmore, Monica A.

2013-01-01

Research links sex ratios with the likelihood of marriage and divorce. However, whether sex ratios similarly influence precursors to marriage—transitions in and out of dating or cohabiting relationships—is unknown. Utilizing data from the Toledo Adolescent Relationships Study (TARS) and the 2000 census, this study assesses whether sex ratios influence the formation and stability of emerging adults’ romantic relationships. Findings show that relationship formation is unaffected by partner availability, yet the presence of partners increases women’s odds of cohabiting, decreases men’s odds of cohabiting, and increases number of dating partners and cheating among men. It appears that sex ratios influence not only transitions in and out of marriage, but also the process through which individuals search for and evaluate partners prior to marriage. PMID:24265510

Characterization of a new Hencken burner with a transition from a reducing-to-oxidizing environment for fundamental coal studies

NASA Astrophysics Data System (ADS)

Adeosun, Adewale; Huang, Qian; Li, Tianxiang; Gopan, Akshay; Wang, Xuebin; Li, Shuiqing; Axelbaum, Richard L.

2018-02-01

In pulverized coal burners, coal particles usually transition from a locally reducing environment to an oxidizing environment. The locally reducing environment in the near-burner region is due to a dense region of coal particles undergoing devolatilization. Following this region, the particles move into an oxidizing environment. This "reducing-to-oxidizing" transition can influence combustion processes such as ignition, particulate formation, and char burnout. To understand these processes at a fundamental level, a system is required that mimics such a transition. Hence, we have developed and characterized a two-stage Hencken burner to evaluate the effect of the reducing-to-oxidizing transition and particle-to-particle interaction (which characterizes dense region of coal particles) on ignition and ultrafine aerosol formation. The two-stage Hencken burner allows coal particles to experience a reducing environment followed by a transition to an oxidizing environment. This work presents the results of the design and characterization of the new two-stage Hencken burner and its new coal feeder. In a unique approach to the operation of the flat-flame of the Hencken burner, the flame configurations are operated as either a normal flame or inverse flame. Gas temperatures and oxygen concentrations for the Hencken burner are measured in reducing-to-oxidizing and oxidizing environments. The results show that stable flames with well-controlled conditions, relatively uniform temperatures, and species concentrations can be achieved in both flame configurations. This new Hencken burner provides an effective system for evaluating the effect of the reducing-to-oxidizing transition and particle-to-particle interaction on early-stage processes of coal combustion such as ignition and ultrafine particle formation.

Development and field testing of a decision support tool to facilitate shared decision making in contraceptive counseling.

PubMed

Dehlendorf, Christine; Fitzpatrick, Judith; Steinauer, Jody; Swiader, Lawrence; Grumbach, Kevin; Hall, Cara; Kuppermann, Miriam

2017-07-01

We developed and formatively evaluated a tablet-based decision support tool for use by women prior to a contraceptive counseling visit to help them engage in shared decision making regarding method selection. Drawing upon formative work around women's preferences for contraceptive counseling and conceptual understanding of health care decision making, we iteratively developed a storyboard and then digital prototypes, based on best practices for decision support tool development. Pilot testing using both quantitative and qualitative data and cognitive testing was conducted. We obtained feedback from patient and provider advisory groups throughout the development process. Ninety-six percent of women who used the tool in pilot testing reported that it helped them choose a method, and qualitative interviews indicated acceptability of the tool's content and presentation. Compared to the control group, women who used the tool demonstrated trends toward increased likelihood of complete satisfaction with their method. Participant responses to cognitive testing were used in tool refinement. Our decision support tool appears acceptable to women in the family planning setting. Formative evaluation of the tool supports its utility among patients making contraceptive decisions, which can be further evaluated in a randomized controlled trial. Copyright © 2017 Elsevier B.V. All rights reserved.

Making a web based ulcer record work by aligning architecture, legislation and users - a formative evaluation study.

PubMed

Ekeland, Anne G; Skipenes, Eva; Nyheim, Beate; Christiansen, Ellen K

2011-01-01

The University Hospital of North Norway selected a web-based ulcer record used in Denmark, available from mobile phones. Data was stored in a common database and easily accessible. According to Norwegian legislation, only employees of the organization that owns an IT system can access the system, and use of mobile units requires strong security solutions. The system had to be changed. The paper addresses interactions in order to make the system legal, and assesses regulations that followed. By addressing conflicting scripts and the contingent nature of knowledge, we conducted a formative evaluation aiming at improving the object being studied. Participatory observation in a one year process, minutes from meetings and information from participants, constitute the data material. In the technological domain, one database was replaced by four. In the health care delivery domain, easy access was replaced by a more complicated log on procedure, and in the domain of law and security, a clarification of risk levels was obtained, thereby allowing for access by mobile phones with today's authentication mechanisms. Flexibility concerning predefined scripts was important in all domains. Changes were made that improved the platform for further development of legitimate communication of patient data via mobile units. The study also shows the value of formative evaluations in innovations.

Regression models evaluating THMs, HAAs and HANs formation upon chloramination of source water collected from Yangtze River Delta Region, China.

PubMed

Lin, Jiajia; Chen, Xi; Ansheng, Zhu; Hong, Huachang; Liang, Yan; Sun, Hongjie; Lin, Hongjun; Chen, Jianrong

2018-09-30

Present study aimed to generate multiple regression models to estimate the formation of trihalomethanes (THMs), haloacetonitriles (HANs) and haloacetic acids (HAAs) during chloramination of source water obtained from Yangtze River Delta Region, China. The results showed that the regression models for trichloromethane (TCM), dichloroacetonitrile (DCAN), dichloroacetic acid (DCAA), dihaloacetic acids (DHAAs), 5 HAAs species regulated by U.S. EPA (HAA 5 ) and total haloacetic acids (HAA 9 ) have good evaluation ability (prediction accuracy reached 81-94%), while the models for total haloacetonitriles (HAN 4 ), trichloroacetic acid (TCAA), trihaloacetic acids (THAAs) and total trihalomethanes (THM 4 ), they appeared relative low prediction accuracy (58-72%). For THMs, dissolved organic nitrogen (DON) was their key organic precursor, yet for HAN, DHAAs and THAAs, UVA 254 played the dominant role. The other key factors influencing DBP formation included the bromide (THM 4 , DHAAs and HAA 9 ), reaction time (DCAN, HAN 4 ), chloramine dose (TCM, DCAA, TCAA, HAA 5 and THAAs). These results provided important information for water works to optimize the water treatment process to control DBPs, and give an evaluating method for DBPs levels when estimating the health risks related with DBP exposure during chloramination. Copyright © 2018 Elsevier Inc. All rights reserved.

Anchoring Vignettes in EQ-5D-5L Questionnaire: Validation of a New Instrument.

PubMed

Azzolina, Danila; Minto, Clara; Boschetto, Stefania; Martinato, Matteo; Bauce, Barbara; Iliceto, Sabino; Gregori, Dario

2017-01-01

Health Related Quality of Life (HRQoL) is an indicator of patient's physical, psychological and social life. HRQoL is influenced by experience, beliefs, perceptions and expectations, and measures subjective perspective of the patient himself. EQ-5D-5L and SF-12 questionnaires are validated instruments useful to measure HRQoL, increasingly administered in electronic formats. The main purpose is to evaluate the feasibility of anchoring vignettes for the EQ-5D-5L questionnaire, with the aim to improve intergroup comparability of responses among different subjects. A comparison with SF-12 questionnaire is carried out. This is a cross-sectional study conducted at the ambulatories of cardiology of the University Hospital of Padova, in Italy. Thirty-eight subjects with a diagnosis of cardiovascular disease or at risk of cardiovascular disease were enrolled. A factorial analysis has been performed to assess the convergent validity of EQ-5D-5L questionnaire compared to Sf-12. Moreover, a compound Hierarchical Ordered Probit (Chopit) model has been estimated to evaluate if the questionnaire form affects the subjective evaluation process in order to compare EQ-5D-5L with and without vignettes. Correlation and factor analysis demonstrate that EQ_5D questionnaire is coherent with SF-12 in paper format. Chopit model estimation shows that questionnaire format does not affect the subjective question interpretation. Moreover, in a parametric model including vignettes, education attainment, disease severity, and gender are predictors of HRQoL status. The EQ-5D including vignettes in electronic format seems to be a valid tool to measure HRQoL as compared to EQ-5D without vignettes in paper format and to SF-12 questionnaire.

Toward Mixed Method Evaluations of Scientific Visualizations and Design Process as an Evaluation Tool.

PubMed

Jackson, Bret; Coffey, Dane; Thorson, Lauren; Schroeder, David; Ellingson, Arin M; Nuckley, David J; Keefe, Daniel F

2012-10-01

In this position paper we discuss successes and limitations of current evaluation strategies for scientific visualizations and argue for embracing a mixed methods strategy of evaluation. The most novel contribution of the approach that we advocate is a new emphasis on employing design processes as practiced in related fields (e.g., graphic design, illustration, architecture) as a formalized mode of evaluation for data visualizations. To motivate this position we describe a series of recent evaluations of scientific visualization interfaces and computer graphics strategies conducted within our research group. Complementing these more traditional evaluations our visualization research group also regularly employs sketching, critique, and other design methods that have been formalized over years of practice in design fields. Our experience has convinced us that these activities are invaluable, often providing much more detailed evaluative feedback about our visualization systems than that obtained via more traditional user studies and the like. We believe that if design-based evaluation methodologies (e.g., ideation, sketching, critique) can be taught and embraced within the visualization community then these may become one of the most effective future strategies for both formative and summative evaluations.

Toward Mixed Method Evaluations of Scientific Visualizations and Design Process as an Evaluation Tool

PubMed Central

Jackson, Bret; Coffey, Dane; Thorson, Lauren; Schroeder, David; Ellingson, Arin M.; Nuckley, David J.

2017-01-01

In this position paper we discuss successes and limitations of current evaluation strategies for scientific visualizations and argue for embracing a mixed methods strategy of evaluation. The most novel contribution of the approach that we advocate is a new emphasis on employing design processes as practiced in related fields (e.g., graphic design, illustration, architecture) as a formalized mode of evaluation for data visualizations. To motivate this position we describe a series of recent evaluations of scientific visualization interfaces and computer graphics strategies conducted within our research group. Complementing these more traditional evaluations our visualization research group also regularly employs sketching, critique, and other design methods that have been formalized over years of practice in design fields. Our experience has convinced us that these activities are invaluable, often providing much more detailed evaluative feedback about our visualization systems than that obtained via more traditional user studies and the like. We believe that if design-based evaluation methodologies (e.g., ideation, sketching, critique) can be taught and embraced within the visualization community then these may become one of the most effective future strategies for both formative and summative evaluations. PMID:28944349

Comprehensive planning of data archive in Japanese planetary missions

NASA Astrophysics Data System (ADS)

Yamamoto, Yukio; Shinohara, Iku; Hoshino, Hirokazu; Tateno, Naoki; Hareyama, Makoto; Okada, Naoki; Ebisawa, Ken

Comprehensive planning of data archive in Japanese planetary missions Japan Aerospace Exploration Agency (JAXA) provides HAYABUSA and KAGUYA data as planetary data archives. These data archives, however, were prepared independently. Therefore the inconsistency of data format has occurred, and the knowledge of data archiving activity is not inherited. Recently, the discussion of comprehensive planning of data archive has started to prepare up-coming planetary missions, which indicates the comprehensive plan of data archive is required in several steps. The framework of the comprehensive plan is divided into four items: Preparation, Evaluation, Preservation, and Service. 1. PREPARATION FRAMEWORK Data is classified into several types: raw data, level-0, 1, 2 processing data, ancillary data, and etc. The task of mission data preparation is responsible for instrument teams, but preparations beside mission data and support of data management are essential to make unified conventions and formats over instruments in a mission, and over missions. 2. EVALUATION FRAMEWORK There are two meanings of evaluation: format and quality. The format evaluation is often discussed in the preparation framework. The data quality evaluation which is often called quality assurance (QA) or quality control (QC) must be performed by third party apart from preparation teams. An instrument team has the initiative for the preparation itself, and the third-party group is organized to evaluate the instrument team's activity. 3. PRESERVATION FRAMEWORK The main topic of this framework is document management, archiving structure, and simple access method. The mission produces many documents in the process of the development. Instrument de-velopment is no exception. During long-term development of a mission, many documents are obsoleted and updated repeatedly. A smart system will help instrument team to reduce some troubles of document management and archiving task. JAXA attempts to follow PDS manners to do this management since PDS has highly sophisticated archiving structure. In addition, the access method to archived data must be simple and standard well over a decade. 4. SERVICE FRAMEWORK The service framework including planetary data access protocol, PDAP, has been developed to share a stored data effectively. The sophisticated service framework will work not only for publication data, but also for low-level data. JAXA's data query services is under developed based on PDAP, which means that the low-level data can be published in the same manner as level 2 data. In this presentation, we report the detail structure of these four frameworks adopting upcoming Planet-C, Venus Climate Orbiter, mission.

Modeling spatially and spectrally resolved observations to diagnose the formation of elliptical galaxies

NASA Astrophysics Data System (ADS)

Snyder, Gregory Frantz

2013-03-01

In extragalactic astronomy, a central challenge is that we cannot directly watch what happens to galaxies before and after they are observed. This dissertation focuses on linking predictions of galaxy time-evolution directly with observations, evaluating how interactions, mergers, and other processes affect the appearance of elliptical galaxies. The primary approach is to combine hydrodynamical simulations of galaxy formation, including all major components, with dust radiative transfer to predict their observational signatures The current paradigm implies that a quiescent elliptical emerges following a formative starburst event. These trigger accretion onto the central supermassive black hole (SMBH), which then radiates as an active galactic nucleus (AGN). However, it is not clear the extent to which SMBH growth is fueled by these events nor how important is their energy input at setting the appearance of the remnant. This thesis presents results drawing from three phases in the formation of a typical elliptical: 1) I evaluate how to disentangle AGN from star formation signatures in mid-infrared spectra during a dust-enshrouded starburst, making testable predictions for robustly tracing SMBH growth with the James Webb Space Telescope; 2) I develop a model for the rate of merger-induced post-starburst galaxies selected from optical spectra, resolving tension between their observed rarity and merger rates from other estimates; and 3) I present results from Hubble Space Telescope imaging of elliptical galaxies in galaxy clusters at 1 < z < 2, the precursors of present-day massive clusters with M ~ 1015 solar masses, demonstrating that their stars formed over an extended period and ruling out the simplest model for their formation history. These results lend support to a stochastic formation history for ellipticals driven by mergers or interactions. However, significant uncertainties remain in how to evaluate the implications of galaxy appearance, in particular their morphologies across cosmic time. In the final chapter, I outline an approach to build a "mock observatory" from cosmological hydrodynamical simulations, with which observations of all types, including at high spatial and spectral resolutions, can be brought to bear in directly constraining the physics of galaxy formation and evolution.

Selecting automation for the clinical chemistry laboratory.

PubMed

Melanson, Stacy E F; Lindeman, Neal I; Jarolim, Petr

2007-07-01

Laboratory automation proposes to improve the quality and efficiency of laboratory operations, and may provide a solution to the quality demands and staff shortages faced by today's clinical laboratories. Several vendors offer automation systems in the United States, with both subtle and obvious differences. Arriving at a decision to automate, and the ensuing evaluation of available products, can be time-consuming and challenging. Although considerable discussion concerning the decision to automate has been published, relatively little attention has been paid to the process of evaluating and selecting automation systems. To outline a process for evaluating and selecting automation systems as a reference for laboratories contemplating laboratory automation. Our Clinical Chemistry Laboratory staff recently evaluated all major laboratory automation systems in the United States, with their respective chemistry and immunochemistry analyzers. Our experience is described and organized according to the selection process, the important considerations in clinical chemistry automation, decisions and implementation, and we give conclusions pertaining to this experience. Including the formation of a committee, workflow analysis, submitting a request for proposal, site visits, and making a final decision, the process of selecting chemistry automation took approximately 14 months. We outline important considerations in automation design, preanalytical processing, analyzer selection, postanalytical storage, and data management. Selecting clinical chemistry laboratory automation is a complex, time-consuming process. Laboratories considering laboratory automation may benefit from the concise overview and narrative and tabular suggestions provided.

On the manufacturing of a gas turbine engine part through metal spinning process

NASA Astrophysics Data System (ADS)

Hassanin, A. El; Astarita, A.; Scherillo, F.; Velotti, C.; Squillace, A.; Liguori, A.

2018-05-01

Metal spinning processes represents an interesting alternative to traditional sheet metal forming processes in several industrial contexts, such as automotive and aerospace. In this work, the production of a combustion chamber liner top prototype using AISI 304L stainless steel is proposed, in order to evaluate the process feasibility for the required part geometry. The prototypes production was carried out using a two-stage semiautomatic spinning process. The effects in terms of wall thickness reduction were investigated. Using optical microscopy and Scanning Electron Microscopy (SEM) techniques, the microstructural behavior of the metal subjected to the forming process was investigated, while for an evaluation of the influence on the mechanical properties Vickers micro-indentation tests were performed. The main result of the process, as observed from all the investigation techniques adopted, is the formation of strain induced martensite due to the severe plastic deformation and cold reduction of the material, ranging in this case from 30% to 50%. In some areas of the part section, some rips indicating an excessive tensile stress were also detected.

Longitudinal evaluation of a pilot e-portfolio-based supervision programme for final year medical students: views of students, supervisors and new graduates.

PubMed

Vance, Gillian H S; Burford, Bryan; Shapiro, Ethan; Price, Richard

2017-08-22

Little is known about how best to implement portfolio-based learning in medical school. We evaluated the introduction of a formative e-portfolio-based supervision pilot for final year medical students by seeking views of students, supervisors and graduates on use and educational effects. Students and supervisors were surveyed by questionnaire, with free text comments invited. Interviews were held with new graduates in their first Foundation Programme placement. Most students used the e-portfolio (54%) and met with their supervisor (62%) 'once or twice' only. Students had more negative views: 22% agreed that the pilot was beneficial, while most supervisors thought that e-portfolio (72%) and supervision (86%) were a 'good idea'. More students reported supervision meetings benefited learning (49%) and professional development (55%) than the e-portfolio did (16%; 28%). Only 47% of students felt 'prepared' for future educational processes, though graduates noted benefits for navigating and understanding e-portfolio building and supervision. Factors limiting engagement reflected 'burden', while supervision meetings and early experience of postgraduate processes offered educational value. Final year students have negative attitudes to a formative e-portfolio, though benefits for easing the educational transition are recognised by graduates. Measures to minimize time, repetition and redundancy of processes may encourage use. Engagement is influenced by the supervisor relationship and educational value may be best achieved by supporting supervisors to develop strategies to facilitate, and motivate self-directed learning processes in undergraduates.

Aerobic granulation in a sequencing batch reactor (SBR) for industrial wastewater treatment.

PubMed

Inizan, M; Freval, A; Cigana, J; Meinhold, J

2005-01-01

Aerobic granulation seems to be an a attractive process for COD removal from industrial wastewater, characterised by a high content of soluble organic compounds. In order to evaluate the practical aspects of the process, comparative experimental tests are performed on synthetic and on industrial wastewater, originating from pharmaceutical industry. Two pilot plants are operated as sequencing batch bubble columns. Focus was put on the feasibility of the process for high COD removal and on its operational procedure. For both wastewaters, a rapid formation of aerobic granules is observed along with a high COD removal rate. Granule characteristics are quite similar with respect to the two types of wastewater. It seems that filamentous bacteria are part of the granule structure and that phosphorus precipitation can play an important role in granule formation. For both wastewaters similar removal performances for dissolved biodegradable COD are observed (> 95%). However, a relatively high concentration of suspended solids in the outlet deteriorates the performance with regard to total COD removal. Biomass detachment seems to play a non-negligible role in the current set-up. After a stable operational phase the variation of the pharmaceutical wastewater caused a destabilisation and loss of the granules, despite the control for balanced nutrient supply. The first results with real industrial wastewater demonstrate the feasibility of this innovative process. However, special attention has to be paid to the critical aspects such as granule stability as well as the economic competitiveness, which both will need further investigation and evaluation.

Reduced prefrontal and temporal processing and recall of high "sensation value" ads.

PubMed

Langleben, Daniel D; Loughead, James W; Ruparel, Kosha; Hakun, Jonathan G; Busch-Winokur, Samantha; Holloway, Matthew B; Strasser, Andrew A; Cappella, Joseph N; Lerman, Caryn

2009-05-15

Public service announcements (PSAs) are non-commercial broadcast ads that are an important part of televised public health campaigns. "Message sensation value" (MSV), a measure of sensory intensity of audio, visual, and content features of an ad, is an important factor in PSA impact. Some communication theories propose that higher message sensation value brings increased attention and cognitive processing, leading to higher ad impact. Others argue that the attention-intensive format could compete with ad's message for cognitive resources and result in reduced processing of PSA content and reduced overall effectiveness. Brain imaging during PSA viewing provides a quantitative surrogate measure of PSA impact and addresses questions of PSA evaluation and design not accessible with traditional subjective and epidemiological methods. We used Blood Oxygenation Level Dependent (BOLD) functional Magnetic Resonance Imaging (fMRI) and recognition memory measures to compare high and low MSV anti-tobacco PSAs and neutral videos. In a short-delay, forced-choice memory test, frames extracted from PSAs were recognized more accurately than frames extracted from the NV. Frames from the low MSV PSAs were better recognized than frames from the high MSV PSAs. The accuracy of recognition of PSA frames was positively correlated with the prefrontal and temporal, and negatively correlated with the occipital cortex activation. The low MSV PSAs were associated with greater prefrontal and temporal activation, than the high MSV PSAs. The high MSV PSAs produced greater activation primarily in the occipital cortex. These findings support the "dual processing" and "limited capacity" theories of communication that postulate a competition between ad's content and format for the viewers' cognitive resources and suggest that the "attention-grabbing" high MSV format could impede the learning and retention of an ad. These findings demonstrate the potential of using neuroimaging in the design and evaluation of mass media public health communications.

Regional seismic lines reprocessed using post-stack processing techniques; National Petroleum Reserve, Alaska

USGS Publications Warehouse

Miller, John J.; Agena, W.F.; Lee, M.W.; Zihlman, F.N.; Grow, J.A.; Taylor, D.J.; Killgore, Michele; Oliver, H.L.

2000-01-01

This CD-ROM contains stacked, migrated, 2-Dimensional seismic reflection data and associated support information for 22 regional seismic lines (3,470 line-miles) recorded in the National Petroleum Reserve ? Alaska (NPRA) from 1974 through 1981. Together, these lines constitute about one-quarter of the seismic data collected as part of the Federal Government?s program to evaluate the petroleum potential of the Reserve. The regional lines, which form a grid covering the entire NPRA, were created by combining various individual lines recorded in different years using different recording parameters. These data were reprocessed by the USGS using modern, post-stack processing techniques, to create a data set suitable for interpretation on interactive seismic interpretation computer workstations. Reprocessing was done in support of ongoing petroleum resource studies by the USGS Energy Program. The CD-ROM contains the following files: 1) 22 files containing the digital seismic data in standard, SEG-Y format; 2) 1 file containing navigation data for the 22 lines in standard SEG-P1 format; 3) 22 small scale graphic images of each seismic line in Adobe Acrobat? PDF format; 4) a graphic image of the location map, generated from the navigation file, with hyperlinks to the graphic images of the seismic lines; 5) an ASCII text file with cross-reference information for relating the sequential trace numbers on each regional line to the line number and shotpoint number of the original component lines; and 6) an explanation of the processing used to create the final seismic sections (this document). The SEG-Y format seismic files and SEG-P1 format navigation file contain all the information necessary for loading the data onto a seismic interpretation workstation.

Planting Healthy Roots: Using Documentary Film to Evaluate and Disseminate Community-Based Participatory Research

PubMed Central

Brandt, Heather M.; Freedman, Darcy A.; Friedman, Daniela B.; Choi, Seul Ki; Seel, Jessica S.; Guest, M. Aaron; Khang, Leepao

2016-01-01

The study purpose was twofold: (1) to evaluate a documentary film featuring the formation and implementation of a farmers’ market and (2) to assess whether the film affected awareness regarding food access issues in a food desert community with high rates of obesity. The coalition model of filmmaking, a model consistent with a community-based participatory research (CBPR) approach, and personal stories, community profiles, and expert interviews were used to develop a documentary film (Planting Healthy Roots). Evaluation demonstrated high levels of approval and satisfaction with the film and CBPR essence of the film. The documentary film aligned with a CBPR approach to document, evaluate, and disseminate research processes and outcomes. PMID:27536929

Asymmetrical flow field-flow fractionation for human serum albumin based nanoparticle characterisation and a deeper insight into particle formation processes.

PubMed

John, C; Langer, K

2014-06-13

Nanoparticles used as drug delivery systems are of growing interest in the pharmaceutical field. Understanding the behaviour and effects of nanosystems in the human body is dependent on comprehensive characterisation of the systems especially with regard to size and size distribution. Asymmetrical flow field-flow fractionation (AF4) is a promising method for this challenge as this technique enables chromatographic separation of particles and solute molecules according to their respective size. Within this study AF4 was used for the characterisation of human serum albumin (HSA) based nanoparticles. In a first part, the most important aspects of method development like the choice of cross flow rate, focusing and the increase of sample concentration via outlet stream splitting on the sample separation were evaluated. Sample fractionation was controlled by inline-coupling of a dynamic light scattering detector (DLS, Zetasizer) and was confirmed by DLS batch mode measurements. In a second part the applicability of field-flow fractionation for characterisation of the HSA particle formation process by a desolvation method was evaluated. A time dependent particle formation was observed which was controlled by the amount of desolvating agent. Furthermore, field-flow fractionation in combination with in-line dynamic light scattering was used to monitor the increase of particle diameter during PEGylation of the resulting HSA nanoparticles. The separation of nanoparticles from dissolved polyethylene glycol (PEG) could successfully be used for determination of the particles' PEGylation degree. Copyright © 2014 Elsevier B.V. All rights reserved.

Encapsulating fatty acid esters of bioactive compounds in starch

NASA Astrophysics Data System (ADS)

Lay Ma, Ursula Vanesa

Interest in the use of many bioactive compounds in foods is growing in large part because of the apparent health benefits of these molecules. However, many of these compounds can be easily degraded during processing, storage, or their passage through the gastrointestinal tract before reaching the target site. In addition, they can be bitter, acrid, or astringent, which may negatively affect the sensory properties of the product. Encapsulation of these molecules may increase their stability during processing, storage, and in the gastrointestinal tract, while providing controlled release properties. The ability of amylose to form inclusion complexes and spherulites while entrapping certain compounds has been suggested as a potential method for encapsulation of certain molecules. However, complex formation and spherulitic crystallization are greatly affected by the type of inclusion molecules, type of starch, and processing conditions. The objectives of the present investigation were to: (a) study the effect of amylose, amylopectin, and intermediate material on spherulite formation and its microstructure; (b) investigate the formation of amylose and high amylose starch inclusion complexes with ascorbyl palmitate, retinyl palmitate, and phytosterol esters; (c) evaluate the ability of spherulites to form in the presence of fatty acid esters and to entrap ascorbyl palmitate, retinyl palmitate, and phytosterol esters; and (d) evaluate the effect of processing conditions on spherulite formation and fatty acid ester entrapment. Higher ratios of linear to branched molecules resulted in the formation of more and rounder spherulites with higher heat stability. In addition to the presence of branches, it appears that spherulitic crystallization is also affected by other factors, such as degree of branching, chain length, and chain length distribution. Amylose and Hylon VII starch formed inclusion complexes with fatty acid esters of ascorbic acid, retinol, or phytosterols. However, only retinyl palmitate formed a complex with amylopectin. In general, ascorbyl palmitate resulted in the highest complexation, followed by retinyl palmitate and phytosterol ester. The presence of native lipids in Hylon VII starch did not inhibit complex formation. On the contrary, native lipids appear to increase the complexation yield and thermal stability of the starch-fatty acid ester inclusion complexes, possibly due to the formation of ternary complexes. From the three fatty acid esters studied, only ascorbyl palmitate was entrapped in starch spherulites. Various structures including round spherulites, various sizes of torus-shape spherulites, non-spherulitic birefringent and non-birefringent particles, "balloon" morphologies, and gel-like material were formed depending on processing conditions. However, only the torus-shape spherulites, and some non-spherulitic birefringent and non-birefringent particles showed ascorbyl palmitate entrapment. The % yield of the precipitate increased with higher % of added Hylon VII, and decreased with higher heating temperature and faster cooling rates. The amount of entrapped ascorbyl palmitate in the starch precipitate seems to be governed by the amount of this compound added during processing. This study showed that starch can form inclusion complexes with fatty acid esters which may be used for the delivery of certain bioactive molecules. In addition, encapsulation of fatty acid esters in starch spherulites may be a good potential delivery system for water soluble bioactive molecules. However, further research is necessary to gain a better understanding of the type of molecules that can be entrapped in starch spherulites, and the factors affecting spherulitic crystallization and bioactive compound entrapment.

The processing of aluminum gasarites via thermal decomposition of interstitial hydrides

NASA Astrophysics Data System (ADS)

Licavoli, Joseph J.

Gasarite structures are a unique type of metallic foam containing tubular pores. The original methods for their production limited them to laboratory study despite appealing foam properties. Thermal decomposition processing of gasarites holds the potential to increase the application of gasarite foams in engineering design by removing several barriers to their industrial scale production. The following study characterized thermal decomposition gasarite processing both experimentally and theoretically. It was found that significant variation was inherent to this process therefore several modifications were necessary to produce gasarites using this method. Conventional means to increase porosity and enhance pore morphology were studied. Pore morphology was determined to be more easily replicated if pores were stabilized by alumina additions and powders were dispersed evenly. In order to better characterize processing, high temperature and high ramp rate thermal decomposition data were gathered. It was found that the high ramp rate thermal decomposition behavior of several hydrides was more rapid than hydride kinetics at low ramp rates. This data was then used to estimate the contribution of several pore formation mechanisms to the development of pore structure. It was found that gas-metal eutectic growth can only be a viable pore formation mode if non-equilibrium conditions persist. Bubble capture cannot be a dominant pore growth mode due to high bubble terminal velocities. Direct gas evolution appears to be the most likely pore formation mode due to high gas evolution rate from the decomposing particulate and microstructural pore growth trends. The overall process was evaluated for its economic viability. It was found that thermal decomposition has potential for industrialization, but further refinements are necessary in order for the process to be viable.

Tools for Formative Evaluation: Gathering the Information Necessary for Program Improvement

ERIC Educational Resources Information Center

Jayaratne, K. S. U.

2016-01-01

New Extension educators experience a steep learning curve when attempting to develop effective Extension programs. Formative evaluation is helpful to new, and experienced, Extension educators in determining the changes necessary for making programs more effective. Formative evaluation is an essential part of program evaluation. However, its use…

Using the Extended Parallel Process Model to Prevent Noise-Induced Hearing Loss among Coal Miners in Appalachia

ERIC Educational Resources Information Center

Murray-Johnson, Lisa; Witte, Kim; Patel, Dhaval; Orrego, Victoria; Zuckerman, Cynthia; Maxfield, Andrew M.; Thimons, Edward D.

2004-01-01

Occupational noise-induced hearing loss is the second most self-reported occupational illness or injury in the United States. Among coal miners, more than 90% of the population reports a hearing deficit by age 55. In this formative evaluation, focus groups were conducted with coal miners in Appalachia to ascertain whether miners perceive hearing…

How the Source of Word-of-Mouth Influences Information Processing in the Formation of Brand Attitudes

ERIC Educational Resources Information Center

Herold, Kristiina; Tarkiainen, Anssi; Sundqvist, Sanna

2016-01-01

Word-of-mouth (WOM) can be a powerful, persuasive source of information, but relatively little is understood about how consumers utilize information in service evaluations and how the source of WOM (e.g. friends, family) affects attitudes. The importance of WOM is acknowledged in the services context; however, the research field of higher…

Evaluating Statistical Targets for Assembling Parallel Mixed-Format Test Forms

ERIC Educational Resources Information Center

Debeer, Dries; Ali, Usama S.; van Rijn, Peter W.

2017-01-01

Test assembly is the process of selecting items from an item pool to form one or more new test forms. Often new test forms are constructed to be parallel with an existing (or an ideal) test. Within the context of item response theory, the test information function (TIF) or the test characteristic curve (TCC) are commonly used as statistical…

Rhetorical Approaches to Crisis Communication: The Research, Development, and Validation of an Image Repair Situational Theory for Educational Leaders

ERIC Educational Resources Information Center

Vogelaar, Robert J.

2005-01-01

In this project a product to aid educational leaders in the process of communicating in crisis situations is presented. The product was created and received a formative evaluation using an educational research and development methodology. Ultimately, an administrative training course that utilized an Image Repair Situational Theory was developed.…

Computational Proficiency and Algorithmic Learning of Sixth-Graders Using DMP Materials: A Formative Evaluation. Technical Report No. 401.

ERIC Educational Resources Information Center

Wiles, Clyde

Two questions were investigated in this study: (1) How did the computational proficiency of sixth graders who had one year's experience with Developing Mathematical Processes (DMP) materials compare with an equivalent group of students who used the usual textbook program; and (2) What occurs when sixth graders study algorithms as sequences of rule…

Assessment of Students' Ratings for Two Methodologies of Teaching via Distance Learning: An Evaluative Approach Based on Accreditation.

ERIC Educational Resources Information Center

Restauri, Sherri L.; King, Franklin L.; Nelson, J. Gordon

Two of the most popular delivery formats in distance education are video conferencing and online methodologies. The first step in the processes of recognition and reorganization needed for both forms of distance education is to identify the differences between the traditional classroom environment and the classroom that is augmented or replaced by…

A STUDY OF PROCESS CONTRIBUTIONS TO OZONE FORMATION DURING THE 2004 ICARTT PERIOD USING THE ETA-CMAQ FORECAST MODEL OVER THE NORTHEASTERN U.S.

EPA Science Inventory

First, this study evaluates the Eta-CMAQ forecast model performances for O₃, and related chemical species with the observational data from the aircraft (NOAA P-3 and NASA DC-8) flights, Lidar and ozonesonde during the 2004 International Consortium for Atmospheric Resea...

A STUDY OF PROCESS CONTRIBUTIONS TO OZONE FORMATION DURING THE 2004 ICARTT PERIOD USING THE ETA- CMAQ FORECAST MODEL OVER THE NORTHEASTERN U.S.

EPA Science Inventory

First, this study evaluates the Eta-CMAQ forecast model performances for O₃, and related chemical species with the observational data from the aircraft (NOAA P-3 and NASA DC-8) flights, Lidar and ozonesonde during the 2004 International Consortium for Atmospheric Resea...

Using social marketing principles to guide the development of a nutrition education initiative for preschool-aged children.

PubMed

Young, Laura; Anderson, Jennifer; Beckstrom, Leslie; Bellows, Laura; Johnson, Susan L

2004-01-01

Within the field of nutrition education, social marketing has become a promising framework to systematically approach problems related to nutrition behavior. In 1997, the Colorado Nutrition Network began developing a social marketing campaign to promote healthful food choices among low-income Coloradans. A multifaceted formative evaluation plan that included focus groups, campaign concept pretesting, and a food frequency questionnaire was used to segment and scrutinize the target audience. The resulting pilot program was a blend of educational and marketing strategies targeting preschoolers that was implemented in Head Start classrooms. The 12-week intervention contained a narrow, behavior-based "try new foods" message, multiple nutrition education activities, and repeated opportunities to taste 13 novel foods. Key strategies used and findings from the formative evaluation process are presented herein in an effort to provide insight for nutrition educators interested in developing similar interventions.

"Dancing on the edge of research" - What is needed to build and sustain research capacity within the massage therapy profession? A formative evaluation.

PubMed

Kania-Richmond, Ania; Menard, Martha B; Barberree, Beth; Mohring, Marvin

2017-04-01

Conducting research on massage therapy (MT) continues to be a significant challenge. To explore and identify the structures, processes, and resources required to enable viable, sustainable and high quality MT research activities in the Canadian context. Academically-based researchers and MT professionals involved in research. Formative evaluation and a descriptive qualitative approach were applied. Five main themes regarding the requirements of a productive and sustainable MT research infrastructure in Canada were identified: 1) core components, 2) variable components, 3) varying perspectives of stakeholder groups, 4) barriers to creating research infrastructure, and 5) negative metaphors. In addition, participants offered a number of recommendations on how to develop such an infrastructure. While barriers exist that require attention, participants' insights suggest there are various pathways through which a productive and sustainable MT research infrastructure can be achieved. Copyright © 2016 Elsevier Ltd. All rights reserved.

Enabling High-Energy, High-Voltage Lithium-Ion Cells: Standardization of Coin-Cell Assembly, Electrochemical Testing, and Evaluation of Full Cells

DOE PAGES

Long, Brandon R.; Rinaldo, Steven G.; Gallagher, Kevin G.; ...

2016-11-09

Coin-cells are often the test format of choice for laboratories engaged in battery research and development as they provide a convenient platform for rapid testing of new materials on a small scale. However, reliable, reproducible data via the coin-cell format is inherently difficult, particularly in the full-cell configuration. In addition, statistical evaluation to prove the consistency and reliability of such data is often neglected. Herein we report on several studies aimed at formalizing physical process parameters and coin-cell construction related to full cells. Statistical analysis and performance benchmarking approaches are advocated as a means to more confidently track changes inmore » cell performance. Finally, we show that trends in the electrochemical data obtained from coin-cells can be reliable and informative when standardized approaches are implemented in a consistent manner.« less

[Hygienic evaluation of new welding processes and welding materials].

PubMed

Gorban', L N

1990-01-01

The possibility of contaminating the breathing air zone with hazardous substances in manual and semi-automated welding increases with the intensity of their formation in the arc zone. This necessitates more comprehensive data on both the specific excreta and the formation intensity of the most hazardous substances, such as hard and gaseous compounds of welding aerosols, with due account of the welding regimen used and electrode diameter, wires, etc. When calculating the effectiveness of both local and general ventilation systems in welding shops, a possibility of a specific one-way hazardous action of some chemical substances (e.g. chromium, fluorine, etc.) should be taken into account.

Analysis of molecular interactions in solid dosage forms; challenge to molecular pharmaceutics.

PubMed

Yamamoto, Keiji; Limwikrant, Waree; Moribe, Kunikazu

2011-01-01

The molecular states of active pharmaceutical ingredients (APIs) in pharmaceutical dosage forms strongly affect the properties and quality of a drug. Various important fundamental physicochemical studies were reviewed from the standpoint of molecular pharmaceutics. Mechanochemical effects were evaluated in mixtures of APIs and pharmaceutical additives. Amorphization, complex formation and nanoparticle formation are observed after grinding process depending on the combination of APIs and pharmaceutical additives. Sealed-heating method and mesoporous materials have been used to investigate drug molecular interactions in dosage forms. Molecular states have been investigated using powder X-ray diffraction, thermal analysis, IR, solid state fluorometry, and NMR. © 2011 Pharmaceutical Society of Japan

Biofilms and Oxidizing Biocides; Evaluation of Disinfection and Removal Effects by Using Established Microbial Systems.

PubMed

Tachikawa, Mariko

2017-01-01

The formation of bacterial biofilms and their disinfection and removal have been important subjects in the maintenance of water quality in areas such as public spas, swimming pools, food processing lines, industrial water systems, and in the hygienic control of medical devices, hospital procedures, etc. Presented here is an outline of biofilm formation, as well as studies on the disinfection and removal of biofilms by oxidizing biocides using established biofilms. These studies using established biofilms may increase the understanding of the variable response of biofilms to planktonic bacteria, and the unique aspects of oxidizing biocides in the disinfection and removal of biofilms.

Evaluation of Water Injection Effect on NO(x) Formation for a Staged Gas Turbine Combustor

NASA Technical Reports Server (NTRS)

Fan, L.; Yang, S. L.; Kundu, K. P.

1996-01-01

NO(x) emission control by water injection on a staged turbine combustor (STC) was modeled using the KIVA-2 code with modification. Water is injected into the rich-burn combustion zone of the combustor by a single nozzle. Parametric study for different water injection patterns was performed. Results show NO(x) emission will decrease after water being injected. Water nozzle location also has significant effect for NO formation and fuel ignition. The chemical kinetic model is also sensitive to the excess water. Through this study, a better understanding of the physics and chemical kinetics is obtained, this will enhance the STC design process.

Risk evaluation of possible human hazards by chemicals, particles, and infectious units

NASA Astrophysics Data System (ADS)

Weber, Lothar W.; Spleiss, Martin

1996-12-01

Formation of laser plume by laser-tissue interaction means an inhomogeneous, pluriphasic and dynamic multicomponent system of biological material and induced modifications. While IR_laser applications often simulate processes of thermal food preservation, UV-lasers favor formation of aromatic organic compounds as VOC. Along with traces of PAH, nitriles and O-/N-containing heterocyclic compounds two classes of dialkyldiketopyrroli(di)nes are special formed VOC as laser solvents. Inhalable particles or partially dried and modified biomass contain - along with infectious particles - a lot of temperature degradation products. Ames tests and Comet-assays gave hint to some mutagenic activities present in laser smoke.

Evaluation of board performance in Iran's universities of medical sciences.

PubMed

Sajadi, Haniye Sadat; Maleki, Mohammadreza; Ravaghi, Hamid; Farzan, Homayoun; Aminlou, Hasan; Hadi, Mohammad

2014-10-01

The critical role that the board plays in governance of universities clarifies the necessity of evaluating its performance. This study was aimed to evaluate the performance of the boards of medical universities and provide solutions to enhance its performance. The first phase of present study was a qualitative research in which data were collected through face-to-face semi-structured interviews. Data were analyzed by thematic approach. The second phase was a mixed qualitative and quantitative study, with quantitative part in cross-sectional format and qualitative part in content analysis format. In the quantitative part, data were collected through Ministry of Health and Medical Education (MoHME). In the qualitative part, the content of 2,148 resolutions that were selected by using stratified sampling method were analyzed. Participants believed that the boards had no acceptable performance for a long time.RESULTS also indicated the increasing number of meetings and resolutions of the boards in these 21 years. The boards' resolutions were mostly operational in domain and administrative in nature. The share of specific resolutions was more than the general ones. Given the current pace of change and development and the need to timely respond them, it is recommended to accelerate the slow pace of improvement process of the boards. It appears that more delegation and strengthening the position of the boards are the effective strategies to speed up this process.

Evaluation of board performance in Iran’s universities of medical sciences

PubMed Central

Sajadi, Haniye Sadat; Maleki, Mohammadreza; Ravaghi, Hamid; Farzan, Homayoun; Aminlou, Hasan; Hadi, Mohammad

2014-01-01

Background: The critical role that the board plays in governance of universities clarifies the necessity of evaluating its performance. This study was aimed to evaluate the performance of the boards of medical universities and provide solutions to enhance its performance. Methods: The first phase of present study was a qualitative research in which data were collected through face-to-face semi-structured interviews. Data were analyzed by thematic approach. The second phase was a mixed qualitative and quantitative study, with quantitative part in cross-sectional format and qualitative part in content analysis format. In the quantitative part, data were collected through Ministry of Health and Medical Education (MoHME). In the qualitative part, the content of 2,148 resolutions that were selected by using stratified sampling method were analyzed. Results: Participants believed that the boards had no acceptable performance for a long time.Results also indicated the increasing number of meetings and resolutions of the boards in these 21 years. The boards’ resolutions were mostly operational in domain and administrative in nature. The share of specific resolutions was more than the general ones. Conclusion: Given the current pace of change and development and the need to timely respond them, it is recommended to accelerate the slow pace of improvement process of the boards. It appears that more delegation and strengthening the position of the boards are the effective strategies to speed up this process. PMID:25337597

Innovative teaching: Use of Screencast in the Agronomist Engineer High School of the UPM

NASA Astrophysics Data System (ADS)

Mediola, Maria Angeles; Aguado, Pedro Luis; Espejo, Rafael

2013-04-01

In the last academic courses, the Polytechnic University of Madrid (UPM) has supported the use of multimedia materials and methods in education and learning processes to improve the efficiency and impact obtained by faculty and students. With this aim during 2011-2012 course the multimedia method titled "Screencast" has been implemented in the subject "Plantas de Interés Agroalimentario" included in the curricula of the Agronomist Engineer High School. Next year will be apply in the subject "Soil Science" in the new degree. The Screencast tools allow record digital videos with sound directly into a computer so lecture and class can be recorded directly. The videos can be edited after including narrations, special effects as zoom, notes, images, etc. Screencast tools are simple use tools which are easy made tutorials, manuals, presentations and shows that help to students with different processes that are very hard to understand for students (1) (2). There are different Screencast tools in the market and after an evaluation process the most suitable for our need has been BB FlashBack Express (3) because is easy use, free and compatible with WEBCAM. This software allows export to Flash and AVI video formats. In our case the format chosen was the Flash format because the file sizes obtained were smaller than in AVI format. The use of BB FlashBack Express of the studied subject allowed make easy self-learning multimedia material and testing different methodologies and procedures for the use of this multimedia source in Internet. The BB FlashBack Express software was used during the course by teachers and students of this subject achieving a good improvement in the education and learning processes. The evaluation of the results obtained in the application of this method had shown that ability of students to use new technologies and spread their ideas has been increased as much into as outside classrooms. The materials made in this work had been joined to different learning platforms of the UPM as UPM Educational Channel in YouTube and others video-conference applications developed by UPM. There is possible to export the recorded material to SCORM format which can be included in Moodle (Learning Virtual Environment) and be used by students when they needed it. Bibliography: [1] Lloyd, S., Robertson, C. (2012). Screencast Tutorials Enhance Student Learning of Statistics. Journal of Teaching and Psychology. January 2012. vol. 39 (1). pp. 67-71.

ARPA surveillance technology for detection of targets hidden in foliage

NASA Astrophysics Data System (ADS)

Hoff, Lawrence E.; Stotts, Larry B.

1994-02-01

The processing of large quantities of synthetic aperture radar data in real time is a complex problem. Even the image formation process taxes today's most advanced computers. The use of complex algorithms with multiple channels adds another dimension to the computational problem. Advanced Research Projects Agency (ARPA) is currently planning on using the Paragon parallel processor for this task. The Paragon is small enough to allow its use in a sensor aircraft. Candidate algorithms will be implemented on the Paragon for evaluation for real time processing. In this paper ARPA technology developments for detecting targets hidden in foliage are reviewed and examples of signal processing techniques on field collected data are presented.

A Formative Evaluation of CU-SeeMe.

DTIC Science & Technology

1995-02-01

CU- SeeMe is a video conferencing software package that was designed and programmed at Cornell University. The program works with the TCP/IP network...protocol and allows two or more parties to conduct a real-time video conference with full audio support. In this paper we evaluate CU- SeeMe through...caused the problem and why This helps in the process of formulating solutions for observed usability problems. All the testing results are combined in the Appendix in an illustrated partial redesign of the CU- SeeMe Interface.

Development of betavoltaic cell technology production based on microchannel silicon and its electrical parameters evaluation.

PubMed

Krasnov, A A; Starkov, V V; Legotin, S A; Rabinovich, O I; Didenko, S I; Murashev, V N; Cheverikin, V V; Yakimov, E B; Fedulova, N A; Rogozev, B I; Laryushkin, A S

2017-03-01

In the paper a manufacturing process of three-dimensional (3D) microchannel structure by silicon (Si) anodic etching was discussed. The possibility of microchannels formation allows to increase the active area more than 100 times. In this structure the p-n junction on the whole Si surface was formed. The obtained data allowed to evaluate the characteristics of the betavoltaic converter with a 3D structure by using isotope 63Ni with a specific activity of 10Ci/g. Copyright © 2016 Elsevier Ltd. All rights reserved.

Numerical analysis of fume formation mechanism in arc welding

NASA Astrophysics Data System (ADS)

Tashiro, Shinichi; Zeniya, Tasuku; Yamamoto, Kentaro; Tanaka, Manabu; Nakata, Kazuhiro; Murphy, Anthony B.; Yamamoto, Eri; Yamazaki, Kei; Suzuki, Keiichi

2010-11-01

In order to clarify the fume formation mechanism in arc welding, a quantitative investigation based on the knowledge of interaction among the electrode, arc and weld pool is indispensable. A fume formation model consisting of a heterogeneous condensation model, a homogeneous nucleation model and a coagulation model has been developed and coupled with the GTA or GMA welding model. A series of processes from evaporation of metal vapour to fume formation from the metal vapour was totally investigated by employing this simulation model. The aim of this paper is to visualize the fume formation process and clarify the fume formation mechanism theoretically through a numerical analysis. Furthermore, the reliability of the simulation model was also evaluated through a comparison of the simulation result with the experimental result. As a result, it was found that the size of the secondary particles consisting of small particles with a size of several tens of nanometres reached 300 nm at maximum and the secondary particle was in a U-shaped chain form in helium GTA welding. Furthermore, it was also clarified that most part of the fume was produced in the downstream region of the arc originating from the metal vapour evaporated mainly from the droplet in argon GMA welding. The fume was constituted by particles with a size of several tens of nanometres and had similar characteristics to that of GTA welding. On the other hand, if the metal transfer becomes unstable and the metal vapour near the droplet diffuses directly towards the surroundings of the arc not getting into the plasma flow, the size of the particles reaches several hundred nanometres.

High-Performance of Gas Hydrates in Confined Nanospace for Reversible CH4 /CO2 Storage.

PubMed

Casco, Mirian E; Jordá, José L; Rey, Fernando; Fauth, François; Martinez-Escandell, Manuel; Rodríguez-Reinoso, Francisco; Ramos-Fernández, Enrique V; Silvestre-Albero, Joaquín

2016-07-11

The molecular exchange of CH4 for CO2 in gas hydrates grown in confined nanospace has been evaluated for the first time using activated carbons as a host structure. The nano-confinement effects taking place inside the carbon cavities and the exceptional physicochemical properties of the carbon structure allows us to accelerate the formation and decomposition process of the gas hydrates from the conventional timescale of hours/days in artificial bulk systems to minutes in confined nanospace. The CH4 /CO2 exchange process is fully reversible with high efficiency at practical temperature and pressure conditions. Furthermore, these activated carbons can be envisaged as promising materials for long-distance natural gas and CO2 transportation because of the combination of a high storage capacity, a high reversibility, and most important, with extremely fast kinetics for gas hydrate formation and release. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Flight-test evaluation of two electronic display formats for approach to landing under instrument conditions

NASA Technical Reports Server (NTRS)

Morello, S. A.; Knox, C. E.; Steinmetz, G. G.

1977-01-01

The results of a flight evaluation of two electronic display formats for the approach to landing under instrument conditions are presented. The evaluation was conducted for a base-line electronic display format and for the same format with runway symbology and track information added. The evaluation was conducted during 3 deg, manual straight-in approaches with and without initial localizer offsets. Flight path tracking performance data and pilot subjective comments were examined with regard to the pilot's ability to capture and maintain localizer and glide slope by using both display formats.

Statistical Process Control for KSC Processing

NASA Technical Reports Server (NTRS)

Ford, Roger G.; Delgado, Hector; Tilley, Randy

1996-01-01

The 1996 Summer Faculty Fellowship Program and Kennedy Space Center (KSC) served as the basis for a research effort into statistical process control for KSC processing. The effort entailed several tasks and goals. The first was to develop a customized statistical process control (SPC) course for the Safety and Mission Assurance Trends Analysis Group. The actual teaching of this course took place over several weeks. In addition, an Internet version of the same course complete with animation and video excerpts from the course when it was taught at KSC was developed. The application of SPC to shuttle processing took up the rest of the summer research project. This effort entailed the evaluation of SPC use at KSC, both present and potential, due to the change in roles for NASA and the Single Flight Operations Contractor (SFOC). Individual consulting on SPC use was accomplished as well as an evaluation of SPC software for KSC use in the future. A final accomplishment of the orientation of the author to NASA changes, terminology, data format, and new NASA task definitions will allow future consultation when the needs arise.

Processability evaluation of a Mo-containing FeCrAl alloy for seamless thin-wall tube fabrication

DOE PAGES

Sun, Zhiqian; Yamamoto, Yukinori

2017-06-10

The processability of a Mo-containing FeCrAl alloy (Fe-13Cr-5.2Al-2Mo base, in wt%), developed for accident-tolerant nuclear fuel claddings, was evaluated through a stepwise rolling process at 400 °C under two different inter-pass annealing conditions (i.e., 650 °C for 1 h and at 870 °C for 30 min). The inter-pass annealing at 870 °C easily softened the FeCrAl alloy; however, it led to the formation of coarse grains of ~200 µm. On the other hand, the FeCrAl alloy maintained elongated, deformed grains with the inter-pass annealing at 650 °C, but the annealed samples showed relatively high deformation resistance and strong texture. Importantmore » aspects concerning the processability and microstructural control of FeCrAl alloys, such as deformation inhomogeneity, texture development, and grain coarsening, were discussed. Optimized processing conditions were recommended, based on the results, to achieve desirable microstructures with balanced processability and mechanical properties.« less

Radiographic and histological evaluation of ectopic application of deproteinized bovine bone matrix.

PubMed

da Silva, Rodrigo Carlos; Crivellaro, Viviane Rozeira; Giovanini, Allan Fernando; Scariot, Rafaela; Gonzaga, Carla Castiglia; Zielak, João César

2016-01-01

To evaluate, through radiographic and histological analysis, the tissue reaction induced by a biomaterial based on deproteinized bovine bone matrix (DBBM) in the muscle of sheep. Sixteen sheep were used. The animals underwent surgery to insert polyethylene tubes containing the biomaterial in the muscle of the lower back (ectopic site) and were euthanized after 3 and 6 months. Each sheep received three tubes: Group 1 - sham group (negative control - tube without biomaterial), Group 2 - particulate autogenous bone (positive control), and Group 3 - DBBM biomaterial (GenOx Inorg). The material removed was evaluated by radiographic, macroscopic, and microscopic analysis, descriptively. Macroscopic analysis showed that Group 3 had a greater tissue volume maintenance. Microscopic analysis indicated that Group 1 had a higher concentration of dense, thin collagen fibers (3 and 6 months); in Group 2, there was a decrease in the inflammatory process and the deposition of dense, thin collagen fibers (3 and 6 months); in Group 3, the presence of a dense connective tissue was noted, in which the DBBM particles (3 months) were found. On the periphery of these particles, a deposition of basophilic material was found, indicating the formation of mineral particles and the formation of tissues with osteoid characteristics (6 months). Based on the results obtained, it can be concluded that the biomaterial based on DBBM led to the formation of tissue with similar characteristics to an osteoid matrix in a postoperative period of 6 months. However, none of the groups evaluated showed ectopic bone neoformation.

SCALE: A modular code system for performing Standardized Computer Analyses for Licensing Evaluation. Volume 1, Part 2: Control modules S1--H1; Revision 5

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automated the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system hasmore » been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.3 of the system.« less

The Use of Social Survey Data in the Development of Formative Evaluations.

ERIC Educational Resources Information Center

York, John D.

Evaluators who perform formative evaluations would be well served to apprise themselves of recent survey research in framing formative evaluations. Illustrative examples are used from research into such diverse areas of activity as: the development of identities attached to different forms of modern rock and roll; the rationales that juvenile…

Inhibition and inactivation of Salmonella typhimurium biofilms from polystyrene and stainless steel surfaces by essential oils and phenolic constituent carvacrol.

PubMed

Soni, Kamlesh A; Oladunjoye, Ademola; Nannapaneni, Ramakrishna; Schilling, M Wes; Silva, Juan L; Mikel, Benjy; Bailey, R Hartford

2013-02-01

Persistence of Salmonella biofilms within food processing environments is an important source of Salmonella contamination in the food chain. In this study, essential oils of thyme and oregano and their antimicrobial phenolic constituent carvacrol were evaluated for their ability to inhibit biofilm formation and inactivate preformed Salmonella biofilms. A crystal violet staining assay and CFU measurements were utilized to quantify biofilm cell mass, with evaluating factors such as strain variation, essential oil type, their concentrations, exposure time, as well as biofilm formation surface. Of the three Salmonella strains, Salmonella Typhimurium ATCC 23564 and Salmonella Typhimurium ATCC 19585 produced stronger biofilms than Salmonella Typhimurium ATCC 14028. Biofilm formation by different Salmonella strains was 1.5- to 2-fold higher at 22°C than at 30 or 37°C. The presence of nonbiocidal concentrations of thyme oil, oregano oil, and phenolic carvacrol at 0.006 to 0.012% suppressed Salmonella spp. biofilm formation 2- to 4-fold, but could not completely eliminate biofilm formation. There was high correlation in terms of biofilm inactivation, as determined by the crystal violet-stained optical density (at a 562-nm wavelength) readings and the viable CFU counts. Reduction of biofilm cell mass was dependent on antimicrobial concentration. A minimum concentration of 0.05 to 0.1% of these antimicrobial agents was needed to reduce a 7-log CFU biofilm mass to a nondetectable level on both polystyrene and stainless steel surfaces within 1 h of exposure time.

Designing an evaluation framework for WFME basic standards for medical education.

PubMed

Tackett, Sean; Grant, Janet; Mmari, Kristin

2016-01-01

To create an evaluation plan for the World Federation for Medical Education (WFME) accreditation standards for basic medical education. We conceptualized the 100 basic standards from "Basic Medical Education: WFME Global Standards for Quality Improvement: The 2012 Revision" as medical education program objectives. Standards were simplified into evaluable items, which were then categorized as inputs, processes, outputs and/or outcomes to generate a logic model and corresponding plan for data collection. WFME standards posed significant challenges to evaluation due to complex wording, inconsistent formatting and lack of existing assessment tools. Our resulting logic model contained 244 items. Standard B 5.1.1 separated into 24 items, the most for any single standard. A large proportion of items (40%) required evaluation of more than one input, process, output and/or outcome. Only one standard (B 3.2.2) was interpreted as requiring evaluation of a program outcome. Current WFME standards are difficult to use for evaluation planning. Our analysis may guide adaptation and revision of standards to make them more evaluable. Our logic model and data collection plan may be useful to medical schools planning an institutional self-review and to accrediting authorities wanting to provide guidance to schools under their purview.

Microscale bioprocess optimisation.

PubMed

Micheletti, Martina; Lye, Gary J

2006-12-01

Microscale processing techniques offer the potential to speed up the delivery of new drugs to the market, reducing development costs and increasing patient benefit. These techniques have application across both the chemical and biopharmaceutical sectors. The approach involves the study of individual bioprocess operations at the microlitre scale using either microwell or microfluidic formats. In both cases the aim is to generate quantitative bioprocess information early on, so as to inform bioprocess design and speed translation to the manufacturing scale. Automation can enhance experimental throughput and will facilitate the parallel evaluation of competing biocatalyst and process options.

Radar target classification studies: Software development and documentation

NASA Astrophysics Data System (ADS)

Kamis, A.; Garber, F.; Walton, E.

1985-09-01

Three computer programs were developed to process and analyze calibrated radar returns. The first program, called DATABASE, was developed to create and manage a random accessed data base. The second program, called FTRAN DB, was developed to process horizontal and vertical polarizations radar returns into different formats (i.e., time domain, circular polarizations and polarization parameters). The third program, called RSSE, was developed to simulate a variety of radar systems and to evaluate their ability to identify radar returns. Complete computer listings are included in the appendix volumes.

High Pressure Serpentinization Catalysed by Awaruite in Planetary Bodies

NASA Astrophysics Data System (ADS)

Neto-Lima, J.; Fernández-Sampedro, M.; Prieto-Ballesteros, O.

2017-10-01

Recent discoveries from planetary missions show that serpentinization process may act significantly on the geological evolution and potential habitability of the icy bodies of the Solar System, like Enceladus or Europa. Here we review the available experimental data so far about methane formation occurring during serpentinization, which is potentially relevant to icy moons, and present our results using awaruite as a catalyst of this process. The efficiency of awaruite and high pressure in the Fischer-Tropsch and Sabatier Type reactions are evaluated here when olivine is incubated.

Towards the damage evaluation using Gurson-Tvergaard-Needleman (GTN) model for hot forming processes

NASA Astrophysics Data System (ADS)

Imran, Muhammad; Bambach, Markus

2018-05-01

In the production of semi-finished metal products, hot forming is used to eliminate the pores and voids from the casting process under compressive stresses and to modify the microstructure for further processing. In the case of caliber and flat rolling processes, tensile stresses occur at certain roll gap ratios which promote pore formation on nonmetallic inclusion. The formation of new pores contributes to ductile damage and reduces the load carrying capacity of the material. In the literature, the damage nucleation and growth during the hot forming process are not comprehensively described. The aim of this study is to understand the damage initiation and growth mechanism during hot forming processes. Hot tensile tests are performed at different temperatures and strain rates for 16MnCrS5 steel. To investigate the influence of geometrical variations on the damage mechanism, specimens with different stress triaxiality ratios are used. Finite element simulations using the Gurson-Tvergaard-Needleman (GTN) damage model are performed to estimate the critical void fraction for the damage initiation and the evolution of the void volume fraction. The results showed that the GTN model underestimates the softening of the material due to the independence of the temperature and the strain rate.

Development and evaluation of an airplane electronic display format aligned with the inertial velocity vector

NASA Technical Reports Server (NTRS)

Steinmetz, G. G.

1986-01-01

The development of an electronic primary flight display format aligned with the aircraft velocity vector, a simulation evaluation comparing this format with an electronic attitude-aligned primary flight display format, and a flight evaluation of the velocity-vector-aligned display format are described. Earlier tests in turbulent conditions with the electronic attitude-aligned display format had exhibited unsteadiness. A primary objective of aligning the display format with the velocity vector was to take advantage of a velocity-vector control-wheel steering system to provide steadiness of display during turbulent conditions. Better situational awareness under crosswind conditions was also achieved. The evaluation task was a curved, descending approach with turbulent and crosswind conditions. Primary flight display formats contained computer-drawn perspective runway images and flight-path angle information. The flight tests were conducted aboard the NASA Transport Systems Research Vehicle (TSRV). Comparative results of the simulation and flight tests were principally obtained from subjective commentary. Overall, the pilots preferred the display format aligned with the velocity vector.

[RehaFuturReal®: Evaluation of Implementation in Organizational Structure and in Counseling Process - An Overview of Results].

PubMed

Arling, V; Knispel, J; Spijkers, W

2016-08-01

Due to prevailing future challenges in vocational rehabilitation, development process RehaFutur (BMAS) was initiated. In this context, recommendations were made to secure a future-oriented, innovative vocational rehabilitation in Germany. Deutsche Rentenversicherung (DRV) Westfalen transferred these recommendations into a new and applicable counseling concept RehaFutuReal(®). Rehabilitation managers (RM) are central protagonists in counseling process. Therefore, RehaFuturReal(®) focused on optimization of counseling performance. To achieve this aim, rehabilitation managers were taught to work with a case management (CM) based approach. RWTH Aachen supported RehaFuturReal(®) from an academic point of view and conducted a formative and summative evaluation. Primary aim of RWTH Aachen was to support DRV Westfalen during implementation of RehaFuturReal(®) into their organizational structure. Additionally, RWTH Aachen controlled whether transfer of RehaFutuReal(®) in counseling process was successful. From 04-01-13 until 12-31-14, RehaFuturReal(®) was tested by DRV Westfalen in the intervention district Dortmund with 10 RM. There were 3 selection criteria for the overall sample of N=320 insurants: participants were required to have an active employment status, suffered from integration issues and were in need of support to achieve vocational integration. Evaluation of RehaFuturReal(®) was realized summative (pre-post-comparison) and formative (process-orientated). Evaluative judgment regarding implementation in organizational structure and counseling process was performed by using three-stage-concept of Donabedian (quality of structure, process and results). Thereby, feedback of RM, insurants and employers was taken into account. Analysis of evaluation results revealed a positive overall impression. Implementation into organizational structure was successful on all 3 quality stages: concept of project and CM-training were an adequate basis and appropriately put into practice by fulfilling prescribed objectives, topics and schedule (quality of structure). Rehabilitation managers identified themselves with the implementation process into DRV Westfalen (grading of CM training: M=1,67; SD=0,65; quality of process). Analogous, consultants reported a high level of satisfaction during implementation of new counseling process (possible span: 1-4; M=3,11; SD=0,33; quality of results). Regarding implementation of counseling process, sample fitted into 3 selection criteria wherefore the correct insurants were picked in RehaFuturReal(®) (quality of structure). CM-orientated counseling approach was properly implemented into everyday work of RM by using CM-instruments for documentation (quality of process). RM were highly satisfied (possible span: 1-4) with counseling performance (M=3,43; SD=0,77). Employers also rated counseling performance positively (M=3,38; SD=0,85). By contrast, surveying insurants revealed a heterogeneous impression of satisfaction (M=2,97; SD=1,03) (quality of results). © Georg Thieme Verlag KG Stuttgart · New York.

Rationale, design and methods for process evaluation in the HEALTHY study.

PubMed

Schneider, M; Hall, W J; Hernandez, A E; Hindes, K; Montez, G; Pham, T; Rosen, L; Sleigh, A; Thompson, D; Volpe, S L; Zeveloff, A; Steckler, A

2009-08-01

The HEALTHY study was a multi-site randomized trial designed to determine whether a 3-year school-based intervention targeting nutrition and physical activity behaviors could effectively reduce risk factors associated with type 2 diabetes in middle school children. Pilot and formative studies were conducted to inform the development of the intervention components and the process evaluation methods for the main trial. During the main trial, both qualitative and quantitative assessments monitored the fidelity of the intervention and motivated modifications to improve intervention delivery. Structured observations of physical education classes, total school food environments, classroom-based educational modules, and communications and promotional campaigns provided verification that the intervention was delivered as intended. Interviews and focus groups yielded a multidimensional assessment of how the intervention was delivered and received, as well as identifying the barriers to and facilitators of the intervention across and within participating schools. Interim summaries of process evaluation data were presented to the study group as a means of ensuring standardization and quality of the intervention across the seven participating centers. Process evaluation methods and procedures documented the fidelity with which the HEALTHY study was implemented across 21 intervention schools and identified ways in which the intervention delivery might be enhanced throughout the study.

Concurrent Formative Evaluation: Guidelines and Implications for Multimedia Designers.

ERIC Educational Resources Information Center

Northrup, Pamela Taylor

1995-01-01

Discusses formative evaluation for multimedia instruction and presents guidelines for formatively evaluating multimedia instruction concurrent with analysis, design, and development. Data collection criteria that include group involvement, data collection strategies, and information to be gathered are presented, and rapid prototypes and…

SCI-U: E-learning for patient education in spinal cord injury rehabilitation

PubMed Central

Shepherd, John D.; Badger-Brown, Karla M.; Legassic, Matthew S.; Walia, Saagar; Wolfe, Dalton L.

2012-01-01

Background/objectives To develop an online patient education resource for use in spinal cord injury rehabilitation. Participants The development process involved more than 100 subject-matter experts (SMEs) (rehabilitation professionals and consumers) from across Canada. Preliminary evaluation was conducted with 25 end-users. Methods An iterative development process was coordinated by a project team; SMEs (including patients) developed the content in working groups using wiki-based tools. Multiple rounds of feedback based on early prototypes helped improve the courses during development. Results Five courses were created, each featuring more than 45 minutes of video content and hundreds of media assets. Preliminary evaluation results indicate that users were satisfied by the courses and perceived them to be effective. Conclusions This is an effective process for developing multimedia patient education resources; the involvement of patients in all parts of the process was particularly helpful. Future work will focus on implementation, integration into clinical practice and other delivery formats (smart phones, tablets). PMID:23031169

Altering the cooling rate dependence of phase formation during rapid solidification in the Nd 2Fe 14B system

NASA Astrophysics Data System (ADS)

Branagan, D. J.; McCallum, R. W.

In order to evaluate the effects of additions on the solidification behavior of Nd 2Fe 14B, a stoichiometric alloy was modified with elemental additions of Ti or C and a compound addition of Ti with C. For each alloy, a series of wheel speed runs was undertaken, from which the optimum wheel speeds and optimum energy products were determined. On the BHmax versus wheel speed plots, regions were identified in order to analyze the changes with cooling rates leading to phase formation brought about by the alloy modifications. The compilation of the regional data of the modified alloys showed their effects on altering the cooling rate dependence of phase formation. It was found that the regions of properitectic iron formation, glass formation, and the optimum cooling rate can be changed by more than a factor of two through appropriate alloying additions. The effects of the alloy modifications can be visualized in a convenient fashion through the use of a model continuous cooling transformation (CCT) diagram which represents phase formation during the solidification process under continuous cooling conditions for a wide range of cooling rates from rapid solidification to equilibrium cooling.

What is to be done with surplus embryos? Attitude formation with ambivalence in German fertility patients.

PubMed

Kufner, K; Tonne, M; Barth, J

2009-01-01

Improved pregnancy rates in IVF have led to increasing numbers of surplus embryos which can potentially be used for purposes like donation to another infertile couple or further research. Individuals report high levels of ambivalence concerning the donation of surplus embryos. This study examined which strategies infertile patients use to deal with this ambivalence when asked to evaluate potential dispositions of surplus embryos created during IVF. Guideline-based interviews with fertility patients were audio-recorded and transcribed verbatim. Following the principle of theoretical sampling, eight interviews were analysed by use of Grounded Theory. Analyses focused on processes of individual attitude formation. Strategies for handling ambivalence during attitude formation were identified: the six strategies comprise cognitive and communicative strategies, and were integrated into a model of attitude formation under ambivalence. As ambivalence is a relevant phenomenon in attitude formation within IVF treatment, assessment of ambivalence is strongly recommended in social science studies investigating ethical problems in patient care. In the context of informed consent, there is a need for individual counselling which draws attention to the conflicting values during attitude formation. Counsellors should be aware of the signs of and the strategies to deal with ambivalence.

Initial development and performance evaluation of a process for formation of dense carbon by pyrolysis of methane

NASA Technical Reports Server (NTRS)

Noyes, G. P.; Cusick, R. J.

1985-01-01

The three steps in pyrolytic carbon formation are: (1) gaseous hydrocarbon polymerization and aromatic formation; (2) gas-phase condensation and surface adsorption/impingement of polyaromatic hydrocarbon; and (3) final dehydration to carbon. The structure of the carbon in the various stages of formation is examined. The apparatuses and experimental procedures for the pyrolysis of methane in a 60 cm long quartz reactor tube at temperatures ranging from 1400-1600 K are described. The percentage of carbon converted and its density are calculated and tabularly presented. The results reveal that dense carbon formation is maximized and soot eliminated by this procedure. It is observed that conversion efficiency depends on the composition of the inlet gas and conversion increases with increasing temperature. Based on the experimental data a three-man carbon reactor subsystem (CRS) is developed; the functions of the Sabatier Methanation Reactor, two carbon formation reactors and fluid handling components of the CRS are analyzed. The CRS forms 16 kg of carbon at a rate of 0.8 kg/day for 20 days in a two percent volume density quartz wool packing at temperature of 1500-1600 K.

Effect of friction on oxidative graphite intercalation and high-quality graphene formation.

PubMed

Seiler, Steffen; Halbig, Christian E; Grote, Fabian; Rietsch, Philipp; Börrnert, Felix; Kaiser, Ute; Meyer, Bernd; Eigler, Siegfried

2018-02-26

Oxidative wet-chemical delamination of graphene from graphite is expected to become a scalable production method. However, the formation process of the intermediate stage-1 graphite sulfate by sulfuric acid intercalation and its subsequent oxidation are poorly understood and lattice defect formation must be avoided. Here, we demonstrate film formation of micrometer-sized graphene flakes with lattice defects down to 0.02% and visualize the carbon lattice by transmission electron microscopy at atomic resolution. Interestingly, we find that only well-ordered, highly crystalline graphite delaminates into oxo-functionalized graphene, whereas other graphite grades do not form a proper stage-1 intercalate and revert back to graphite upon hydrolysis. Ab initio molecular dynamics simulations show that ideal stacking and electronic oxidation of the graphite layers significantly reduce the friction of the moving sulfuric acid molecules, thereby facilitating intercalation. Furthermore, the evaluation of the stability of oxo-species in graphite sulfate supports an oxidation mechanism that obviates intercalation of the oxidant.

Interfacial film formation: influence on oil spreading rates in lab basin tests and dispersant effectiveness testing in a wave tank.

PubMed

King, Thomas L; Clyburne, Jason A C; Lee, Kenneth; Robinson, Brian J

2013-06-15

Test facilities such as lab basins and wave tanks are essential when evaluating the use of chemical dispersants to treat oil spills at sea. However, these test facilities have boundaries (walls) that provide an ideal environment for surface (interfacial) film formation on seawater. Surface films may form from surfactants naturally present in crude oil as well as dispersant drift/overspray when applied to an oil spill. The objective of this study was to examine the impact of surface film formation on oil spreading rates in a small scale lab basin and on dispersant effectiveness conducted in a large scale wave tank. The process of crude oil spreading on the surface of the basin seawater was influenced in the presence of a surface film as shown using a 1st order kinetic model. In addition, interfacial film formation can greatly influence chemically dispersed crude oil in a large scale dynamic wave tank. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

A scalable neuroinformatics data flow for electrophysiological signals using MapReduce.

PubMed

Jayapandian, Catherine; Wei, Annan; Ramesh, Priya; Zonjy, Bilal; Lhatoo, Samden D; Loparo, Kenneth; Zhang, Guo-Qiang; Sahoo, Satya S

2015-01-01

Data-driven neuroscience research is providing new insights in progression of neurological disorders and supporting the development of improved treatment approaches. However, the volume, velocity, and variety of neuroscience data generated from sophisticated recording instruments and acquisition methods have exacerbated the limited scalability of existing neuroinformatics tools. This makes it difficult for neuroscience researchers to effectively leverage the growing multi-modal neuroscience data to advance research in serious neurological disorders, such as epilepsy. We describe the development of the Cloudwave data flow that uses new data partitioning techniques to store and analyze electrophysiological signal in distributed computing infrastructure. The Cloudwave data flow uses MapReduce parallel programming algorithm to implement an integrated signal data processing pipeline that scales with large volume of data generated at high velocity. Using an epilepsy domain ontology together with an epilepsy focused extensible data representation format called Cloudwave Signal Format (CSF), the data flow addresses the challenge of data heterogeneity and is interoperable with existing neuroinformatics data representation formats, such as HDF5. The scalability of the Cloudwave data flow is evaluated using a 30-node cluster installed with the open source Hadoop software stack. The results demonstrate that the Cloudwave data flow can process increasing volume of signal data by leveraging Hadoop Data Nodes to reduce the total data processing time. The Cloudwave data flow is a template for developing highly scalable neuroscience data processing pipelines using MapReduce algorithms to support a variety of user applications.

A scalable neuroinformatics data flow for electrophysiological signals using MapReduce

PubMed Central

Jayapandian, Catherine; Wei, Annan; Ramesh, Priya; Zonjy, Bilal; Lhatoo, Samden D.; Loparo, Kenneth; Zhang, Guo-Qiang; Sahoo, Satya S.

2015-01-01

Data-driven neuroscience research is providing new insights in progression of neurological disorders and supporting the development of improved treatment approaches. However, the volume, velocity, and variety of neuroscience data generated from sophisticated recording instruments and acquisition methods have exacerbated the limited scalability of existing neuroinformatics tools. This makes it difficult for neuroscience researchers to effectively leverage the growing multi-modal neuroscience data to advance research in serious neurological disorders, such as epilepsy. We describe the development of the Cloudwave data flow that uses new data partitioning techniques to store and analyze electrophysiological signal in distributed computing infrastructure. The Cloudwave data flow uses MapReduce parallel programming algorithm to implement an integrated signal data processing pipeline that scales with large volume of data generated at high velocity. Using an epilepsy domain ontology together with an epilepsy focused extensible data representation format called Cloudwave Signal Format (CSF), the data flow addresses the challenge of data heterogeneity and is interoperable with existing neuroinformatics data representation formats, such as HDF5. The scalability of the Cloudwave data flow is evaluated using a 30-node cluster installed with the open source Hadoop software stack. The results demonstrate that the Cloudwave data flow can process increasing volume of signal data by leveraging Hadoop Data Nodes to reduce the total data processing time. The Cloudwave data flow is a template for developing highly scalable neuroscience data processing pipelines using MapReduce algorithms to support a variety of user applications. PMID:25852536

LANDSAT-D data format control book. Volume 6, appendix C: Partially processed multispectral scanner high density tape (HDT-AM)

NASA Technical Reports Server (NTRS)

Andersen, K. E.

1982-01-01

The format of high density tapes which contain partially processed LANDSAT 4 and LANDSAT D prime MSS image data is defined. This format is based on and is compatible with the existing format for partially processed LANDSAT 3 MSS image data HDTs.

Processing Impact on Monoclonal Antibody Drug Products: Protein Subvisible Particulate Formation Induced by Grinding Stress.

PubMed

Gikanga, Benson; Eisner, Devon Roshan; Ovadia, Robert; Day, Eric S; Stauch, Oliver B; Maa, Yuh-Fun

2017-01-01

Subvisible particle formation in monoclonal antibody drug product resulting from mixing and filling operations represents a significant processing risk that can lead to filter fouling and thereby lead to process delays or failures. Several previous studies from our lab and others demonstrated the formation of subvisible particulates in mAb formulations resulting from mixing operations using some bottom-mounted mixers or stirrer bars. It was hypothesized that the stress (e.g., shear/cavitation) derived from tight clearance and/or close contact between the impeller and shaft was responsible for protein subvisible particulate generation. These studies, however, could not distinguish between the two surfaces without contact (tight clearance) or between two contacting surfaces (close contact). In the present study we expand on those findings and utilize small-scale mixing models that are able to, for the first time, distinguish between tight clearances and tight contact. In this study we evaluated different mixer types including a top-mounted mixer, several impeller-based bottom-mounted mixers, and a rotary piston pump. The impact of tight clearance/close contact on subvisible particle formation in at-scale mixing platforms was demonstrated in the gap between the impeller and drive unit as well as between the piston and the housing of the pump. Furthermore, small-scale mixing models based on different designs of magnetic stir bars that mimic the tight clearance/close contact of the manufacturing-scale mixers also induced subvisible particles in mAb formulations. Additional small-scale models that feature tight clearance but no close contact (grinding) suggested that it is the repeated grinding/contacting of the moving parts and not the presence of tight clearance in the processing equipment that is the root cause of protein subvisible particulate formation. When multiple mAbs, Fabs (fragment antigen binding), or non-antibody related proteins were mixed in the small-scale mixing model, for molecules investigated, it was observed that mAbs and Fabs appear to be more susceptible to particle formation than non-antibody-related proteins. In the grinding zone, mAb/Fab molecules aggregated into insoluble particles with neither detectable soluble aggregates nor fragmented species. This investigation represents a step closer to the understanding of the underlying stress mechanism leading to mAb subvisible particulate formation as the result of drug product processing. LAY ABSTRACT: Mixing and fill finish are important unit operations in drug product manufacturing for compounding (dilution, pooling, homogenization, etc.) and filling into primary packaging containers (vials, pre-filled syringes, etc.), respectively. The current trend in adopting bottom-mounted mixers as well as low fill-volume filling systems has raised concerns about their impact on drug product quality and process performance. However, investigations into the effects of their use for biopharmaceutical products, particularly monoclonal antibody formulations, are rarely published. The purpose of this study is three-fold: (1) to revisit the impact of bottom-mounted mixer design on monoclonal antibody subvisible particle formation; (2) to identify the root cause for subvisible particle formation; and (3) to fully utilize available particle analysis tools to demonstrate the correlation between particle count in the solution and filter fouling during sterile filtration. The outcomes of this study will benefit scientists and engineers who develop biologic product manufacturing processes by providing a better understanding of drug product process challenges. © PDA, Inc. 2017.

The more you ignore me the closer I get: An ERP study of evaluative priming.

PubMed

Gibbons, Henning; Bachmann, Olga; Stahl, Jutta

2014-12-01

We used event-related brain potentials (ERPs) to investigate the various mental processes contributing to evaluative priming-that is, more positive judgments for targets preceded by affectively positive, as opposed to negative, prime stimuli. To ensure ecological validity, we employed a priori meaningful landscape pictures as targets and emotional adjectives as visual primes and presented both primes and targets for relatively long durations (>1 s). Prime-related lateralized readiness potentials (LRPs) revealed response priming as one source of the significant evaluative priming effect. On the other hand, greater right-frontal positive slow wave in the ERP for pictures following negative, as compared with positive, primes indicated altered impression formation, thus supporting automatic spreading activation and/or affect misattribution accounts. Moreover, target LRPs suggested conscious counter-control to reduce the evaluative priming net effect. Finally, when comparing prime ERPs for two groups of participants showing strong versus weak evaluative priming, we found strong evidence for the role of depth of prime processing: In the weak-effect group, prime words evoked an increased visual P1/N1 complex, a larger posterior P2 component, and a greater left-parietal processing negativity presumably reflecting semantic processing. By contrast, a larger medial-frontal P2/N2 complex in the strong-effect group suggested top-down inhibition of the prime's emotional content. Thus, trying to ignore the primes can actually increase, rather than decrease, the evaluative priming effect.

Guideline for Performing Systematic Approach to Evaluate and Qualify Legacy Documents that Support Advanced Reactor Technology Activity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honma, George

The establishment of a systematic process for the evaluation of historic technology information for use in advanced reactor licensing is described. Efforts are underway to recover and preserve Experimental Breeder Reactor II and Fast Flux Test Facility historical data. These efforts have generally emphasized preserving information from data-acquisition systems and hard-copy reports and entering it into modern electronic formats suitable for data retrieval and examination. The guidance contained in this document has been developed to facilitate consistent and systematic evaluation processes relating to quality attributes of historic technical information (with focus on sodium-cooled fast reactor (SFR) technology) that will bemore » used to eventually support licensing of advanced reactor designs. The historical information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The evaluation process is prescribed in terms of SFR technology, but the process can be used to evaluate historical information for any type of advanced reactor technology. An appendix provides a discussion of typical issues that should be considered when evaluating and qualifying historical information for advanced reactor technology fuel and source terms, based on current light water reactor (LWR) requirements and recent experience gained from Next Generation Nuclear Plant (NGNP).« less

[Formative evaluation: experience of the Catalonian family and community medicine teaching units].

PubMed

Ezquerra Lezcano, Matilde; Bundo Vidiella, Magda; Descarrega Queralt, Ramón; Martín Zurro, Amando; Fores García, Dolores; Fornells Vallès, Josep Maria

2010-04-01

The purpose of this article is to report on the experience in formative evaluation that was carried out in the Catalonian family and community medicine teaching units during the years 2001-2007. This formative evaluation project included the use of several evaluation tools such as, self-listening, video-recording, structured observation of clinical practice, cases by computer and simulated patients. Different resident intakes have participated in the development of the project, as well as their teaching unit tutors and coordinators. This accumulated experience has allowed it to progress into the field of formative evaluation, and to adapt and integrate the activities that were being carried out in a resident portfolio, which in our opinion is the best tool for the formative evaluation of the family medicine resident. Copyright 2009 Elsevier España, S.L. All rights reserved.

Lateral Comparative Investigation of Stromatolites: Astrobiological Implications and Assessment of Scales of Control

NASA Astrophysics Data System (ADS)

Ibarra, Yadira; Corsetti, Frank A.

2016-04-01

The processes that govern the formation of stromatolites, structures that may represent macroscopic manifestation of microbial processes and a clear target for astrobiological investigation, occur at various scales (local versus regional), yet determining their relative importance remains a challenge, particularly for ancient deposits and/or if similar deposits are discovered elsewhere in the Solar System. We build upon the traditional multiscale level approach of investigation (micro-, meso-, macro-, mega-) by including a lateral comparative investigational component of fine- to large-scale features to determine the relative significance of local and/or nonlocal controls on stromatolite morphology, and in the process, help constrain the dominant influences on microbialite formation. In one example of lateral comparative investigation, lacustrine microbialites from the Miocene Barstow Formation (California) display two main mesofabrics: (1) micritic bands that drastically change in thickness and cannot directly be traced between adjacent decimeter-scale subunits and (2) sparry fibrous layers that are strikingly consistent across subunits, suggesting the formation of sparry fibrous layers was influenced by a process larger than the length scale between the subunits (likely lake chemistry). Microbialites from the uppermost Triassic Cotham Member, United Kingdom, occur as meter-scale mounds and contain a characteristic succession of laminated and dendrolitic mesofabrics. The same succession of laminated/dendrolitic couplets can be traced, not only from mound to mound, but over 100 km, indicating a regional-scale influence on very small structures (microns to centimeters) that would otherwise not be apparent without the lateral comparative approach, and demonstrating that the scale of the feature does not necessarily scale with the scope of the process. Thus, the combination of lateral comparative investigations and multiscale analyses can provide an effective approach for evaluating the dominant controls on stromatolite texture and morphology throughout the rock record and potentially on other planets via rover-scale analyses (e.g., Mars).

Influence of drinking water treatments on chlorine dioxide consumption and chlorite/chlorate formation.

PubMed

Sorlini, Sabrina; Gialdini, Francesca; Biasibetti, Michela; Collivignarelli, Carlo

2014-05-01

Disinfection is the last treatment stage of a Drinking Water Treatment Plant (DWTP) and is carried out to maintain a residual concentration of disinfectant in the water distribution system. Chlorine dioxide (ClO2) is a widely used chemical employed for this purpose. The aim of this work was to evaluate the influence of several treatments on chlorine dioxide consumption and on chlorite and chlorate formation in the final oxidation/disinfection stage. A number of tests was performed at laboratory scale employing water samples collected from the DWTP of Cremona (Italy). The following processes were studied: oxidation with potassium permanganate, chlorine dioxide and sodium hypochlorite, coagulation/flocculation with ferric chloride and aluminum sulfate, filtration and adsorption onto activated carbon. The results showed that the chlorine dioxide demand is high if sodium hypochlorite or potassium permanganate are employed in pre-oxidation. On the other hand, chlorine dioxide leads to the highest production of chlorite and chlorate. The coagulation/flocculation process after pre-oxidation shows that chlorine dioxide demand decreases if potassium permanganate is employed as an oxidant, both with ferric chloride and aluminum sulfate. Therefore, the combination of these processes leads to a lower production of chlorite and chlorate. Aluminum sulfate is preferable in terms of the chlorine dioxide demand reduction and minimization of the chlorite and chlorate formation. Activated carbon is the most effective solution as it reduced the chlorine dioxide consumption by about 50% and the DBP formation by about 20-40%. Copyright © 2014 Elsevier Ltd. All rights reserved.

Judicial case management and the custody and access assessment: melding the approaches.

PubMed

Leverette, J; Crowe, T; Wenglensky, R; Dunbar, M

1997-08-01

The presence of the Unified Family Court, with procedures emphasizing judicial case management and settlement in custody disputes, provided an opportunity to combine these practices with those of a university hospital-based family court clinic experienced in the provision of custody assessments. Specifically, a process integrating the clinical custody assessment with the work of counsel and court procedures was developed. This format, incorporating the preparation of a clinical settlement conference brief, was then evaluated with emphasis on time management, outcome in relation to settlement or trial, and the effect of clinical assessment at critical points in the combined endeavour. Seventy-two judicial referrals conducted using this format were reviewed. To assess efficiency, we determined time intervals to various points in the process and compared them to previous local practice. Settlement rates, recorded incrementally to mark each component's contribution, were compared with rates noted in the literature. Assessment functions were identified according to the point of resolution of the dispute and in a manner to facilitate comparison with previously published work. The format resulted in 50% of cases settling without trial in under 5 months, a minimum settlement rate of 50%, and confirmed the ability of clinical assessment to contribute flexibly to dispute resolution in several conciliation venues and at trial. Combining legal and mental health efforts can results in more efficient use of resources and a substantial diversion of cases from continuing litigation. While altering the process of clinical assessments enhances such findings, further work is required to assure appropriate selection criteria for various intervention formats.

Evaluating an integrated approach to clinical quality improvement: clinical guidelines, quality measurement, and supportive system design.

PubMed

Cretin, S; Farley, D O; Dolter, K J; Nicholas, W

2001-08-01

Implementing clinical practice guidelines to change patient outcomes presents a challenge. Studies of single interventions focused on changing provider behavior demonstrate modest effects, suggesting that effective guideline implementation requires a multifaceted approach. Traditional biomedical research designs are not well suited to evaluating systems interventions. RAND and the Army Medical Department collaborated to develop and evaluate a system for implementing guidelines and documenting their effects on patient care. The evaluation design blended quality improvement, case study, and epidemiologic methods. A formative evaluation of implementation process and an outcome evaluation of patient impact were combined. Guidelines were implemented in 3 successive demonstrations targeting low back pain, asthma, and diabetes. This paper reports on the first wave of 4 facilities implementing a low back pain guideline. Organizational climate and culture, motivation, leadership commitment, and resources were assessed. Selected indicators of processes and outcomes of care were compared before, during, and after guideline implementation at the demonstration facilities and at comparison facilities. Logistic regression analysis was used to test for guideline effects on patient care. Process evaluation documented varied approaches to quality improvement across sites. Outcome evaluation revealed a significant downward trend in the percentage of acute low back pain patients referred to physical therapy or chiropractic care (10.7% to 7.2%) at demonstration sites and no such trend at control sites. Preliminary results suggest the power of this design to stimulate improvements in guideline implementation while retaining the power to evaluate rigorously effects on patient care.

Linking Automatic Evaluation to Mood and Information Processing Style: Consequences for Experienced Affect, Impression Formation, and Stereotyping

ERIC Educational Resources Information Center

Chartrand, Tanya L.; van Baaren, Rick B.; Bargh, John A.

2006-01-01

According to the feelings-as-information account, a person's mood state signals to him or her the valence of the current environment (N. Schwarz & G. Clore, 1983). However, the ways in which the environment automatically influences mood in the first place remain to be explored. The authors propose that one mechanism by which the environment…

Study of oxygen gas production phenomenon during stand and discharge in silver-zinc batteries

NASA Technical Reports Server (NTRS)

1974-01-01

Standard production procedures for manufacturing silver zinc batteries are evaluated and modified to reduce oxygen generation during open circuit stand and discharge. Production predictions of several variable combinations using analysis models are listed for minimum gassing, with emphasis on the concentration of potassium hydroxide in plate formation. A recommendation for work optimizing the variables involved in plate processing is included.

Soil and salinity mobilization and transport in the Colorado River Basin

Treesearch

Cole Green Rossi; Mark A. Weitz; Kossi Nouwakpo; Ken McGwire

2016-01-01

Federally, the evaluated potential of soil loss risk in national reports in the past and ways to adapt to be proactive in preventing accelerated soil loss on rangelands has been incomplete. The areas where it is difficult to measure due to the complexities of multiple interactions (splash, sheet and rill formation, landscape dominated by wind and water processes,...

Taking the Test Taker's Perspective: Response Process and Test Motivation in Multidimensional Forced-Choice Versus Rating Scale Instruments.

PubMed

Sass, Rachelle; Frick, Susanne; Reips, Ulf-Dietrich; Wetzel, Eunike

2018-03-01

The multidimensional forced-choice (MFC) format has been proposed as an alternative to the rating scale (RS) response format. However, it is unclear how changing the response format may affect the response process and test motivation of participants. In Study 1, we investigated the MFC response process using the think-aloud technique. In Study 2, we compared test motivation between the RS format and different versions of the MFC format (presenting 2, 3, 4, and 5 items simultaneously). The response process to MFC item blocks was similar to the RS response process but involved an additional step of weighing the items within a block against each other. The RS and MFC response format groups did not differ in their test motivation. Thus, from the test taker's perspective, the MFC format is somewhat more demanding to respond to, but this does not appear to decrease test motivation.

Evaluation of erythroblast macrophage protein related to erythroblastic islands in patients with hematopoietic stem cell transplantation

PubMed Central

2013-01-01

Background Hematopoietic evaluation of the patients after Hematopoietic stem cell transplantation (HSCT) is very important. Erythroblast macrophage protein (Emp) is a key protein with function in normal differentiation of erythroid cells and macrophages. Emp expression correlates with erythroblastic island formation, a process widely believed to be associated with hematopoiesis in bone marrow. We aimed to investigate the hematopoietic function of bone marrow from 46 HSCT patients and 16 inpatients with severe anemia applied to the treatment of EPO by measuring Emp expression level. Methods Emp mRNA and protein expression levels in mononuclear cells of bone marrow and peripheral blood samples were detected by RT-PCR and Western blotting method respectively. Results While hematopoiesis occurs in bone marrow, Emp expression level was elevated and more erythroblastic islands were found , and Emp is upregulated in bone marrow in response to erythropoietin (EPO) treatment. Conclusions Emp expression correlates with erythroblastic island formation and has an important function for bone marrow hematopoiesis. Emp could be a potential biomarker for hematopoietic evaluation of HSCT patients. PMID:23566571

An audience-channel-message-evaluation (ACME) framework for health communication campaigns.

PubMed

Noar, Seth M

2012-07-01

Recent reviews of the literature have indicated that a number of health communication campaigns continue to fail to adhere to principles of effective campaign design. The lack of an integrated, organizing framework for the design, implementation, and evaluation of health communication campaigns may contribute to this state of affairs. The current article introduces an audience-channel-message-evaluation (ACME) framework that organizes the major principles of health campaign design, implementation, and evaluation. ACME also explicates the relationships and linkages between the varying principles. Insights from ACME include the following: The choice of audience segment(s) to focus on in a campaign affects all other campaign design choices, including message strategy and channel/component options. Although channel selection influences options for message design, choice of message design also influences channel options. Evaluation should not be thought of as a separate activity, but rather should be infused and integrated throughout the campaign design and implementation process, including formative, process, and outcome evaluation activities. Overall, health communication campaigns that adhere to this integrated set of principles of effective campaign design will have a greater chance of success than those using principles idiosyncratically. These design, implementation, and evaluation principles are embodied in the ACME framework.

Development and piloting of a mother and child intervention to promote resilience in young children of HIV-infected mothers in South Africa

PubMed Central

Visser, Maretha; Finestone, Michelle; Sikkema, Kathleen; Boeving, Alex; Ferreira, Ronel; Eloff, Irma; Forsyth, Brian

2014-01-01

This paper describes the process of developing a parallel intervention for HIV-positive mothers and their young children (6-10 years) with a view to strengthening the relationship between them. Strong mother-child relationships can contribute to enhanced psychological resilience in children. The intervention was developed through action research, involving a situation analysis based on focus group discussions; intervention planning, piloting the intervention and a formative evaluation of the intervention. Participants supplied feedback regarding the value of the intervention in mother-child relationships. The findings obtained from the formative evaluation were used to refine the intervention. Two parallel programmes for mothers and children (15 sessions each) were followed by 10 joint sessions. The intervention for mothers focused on maternal mental health and the strengthening of their capacity to protect and care for their young children. The intervention for children addressed the development of their self-esteem, interpersonal relationships and survival skills. The formative evaluation provided evidence of good participation, support and group cohesion. Qualitative feedback indicated that the activities stimulated mother-child interaction. A similar intervention can easily be applied elsewhere using the detailed manual. The insights gained and lessons learnt related to mother and child interaction within an HIV-context that emerged from this research, can be valuable in other settings, both in Sub-Saharan Africa and elsewhere. PMID:22542951

Life in the slow lane; biogeochemistry of biodegraded petroleum containing reservoirs and implications for energy recovery and carbon management

PubMed Central

Head, Ian M.; Gray, Neil D.; Larter, Stephen R.

2014-01-01

Our understanding of the processes underlying the formation of heavy oil has been transformed in the last decade. The process was once thought to be driven by oxygen delivered to deep petroleum reservoirs by meteoric water. This paradigm has been replaced by a view that the process is anaerobic and frequently associated with methanogenic hydrocarbon degradation. The thermal history of a reservoir exerts a fundamental control on the occurrence of biodegraded petroleum, and microbial activity is focused at the base of the oil column in the oil water transition zone, that represents a hotspot in the petroleum reservoir biome. Here we present a synthesis of new and existing microbiological, geochemical, and biogeochemical data that expands our view of the processes that regulate deep life in petroleum reservoir ecosystems and highlights interactions of a range of biotic and abiotic factors that determine whether petroleum is likely to be biodegraded in situ, with important consequences for oil exploration and production. Specifically we propose that the salinity of reservoir formation waters exerts a key control on the occurrence of biodegraded heavy oil reservoirs and introduce the concept of palaeopickling. We also evaluate the interaction between temperature and salinity to explain the occurrence of non-degraded oil in reservoirs where the temperature has not reached the 80–90°C required for palaeopasteurization. In addition we evaluate several hypotheses that might explain the occurrence of organisms conventionally considered to be aerobic, in nominally anoxic petroleum reservoir habitats. Finally we discuss the role of microbial processes for energy recovery as we make the transition from fossil fuel reliance, and how these fit within the broader socioeconomic landscape of energy futures. PMID:25426105

A survey of analytical methods employed for monitoring of Advanced Oxidation/Reduction Processes for decomposition of selected perfluorinated environmental pollutants.

PubMed

Trojanowicz, Marek; Bobrowski, Krzysztof; Szostek, Bogdan; Bojanowska-Czajka, Anna; Szreder, Tomasz; Bartoszewicz, Iwona; Kulisa, Krzysztof

2018-01-15

The monitoring of Advanced Oxidation/Reduction Processes (AO/RPs) for the evaluation of the yield and mechanisms of decomposition of perfluorinated compounds (PFCs) is often a more difficult task than their determination in the environmental, biological or food samples with complex matrices. This is mostly due to the formation of hundreds, or even thousands, of both intermediate and final products. The considered AO/RPs, involving free radical reactions, include photolytic and photocatalytic processes, Fenton reactions, sonolysis, ozonation, application of ionizing radiation and several wet oxidation processes. The main attention is paid to the most commonly occurring PFCs in the environment, namely PFOA and PFOS. The most powerful and widely exploited method for this purpose is without a doubt LC/MS/MS, which allows the identification and trace quantitation of all species with detectability and resolution power depending on the particular instrumental configurations. The GC/MS is often employed for the monitoring of volatile fluorocarbons, confirming the formation of radicals in the processes of C‒C and C‒S bonds cleavage. For the direct monitoring of radicals participating in the reactions of PFCs decomposition, the molecular spectrophotometry is employed, especially electron paramagnetic resonance (EPR). The UV/Vis spectrophotometry as a detection method is of special importance in the evaluation of kinetics of radical reactions with the use of pulse radiolysis methods. The most commonly employed for the determination of the yield of mineralization of PFCs is ion-chromatography, but there is also potentiometry with ion-selective electrode and the measurements of general parameters such as Total Organic Carbon and Total Organic Fluoride. The presented review is based on about 100 original papers published in both analytical and environmental journals. Copyright © 2017 Elsevier B.V. All rights reserved.

Commentary on a participatory inquiry paradigm used to assess EOL simulation participant outcomes and design.

PubMed

Gannon, Jane M

2017-11-20

Care at the end-of-life has attracted global attention, as health care workers struggle with balancing cure based care with end-of-life care, and knowing when to transition from the former to the latter. Simulation is gaining in popularity as an education strategy to facilitate health care provider decision-making by improving communication skills with patients and family members. This commentary focuses on the authors' simulation evaluation process. When data were assessed using a participatory inquiry paradigm, the evaluation revealed far more than a formative or summative evaluation of participant knowledge and skills in this area of care. Consequently, this assessment strategy has ramifications for best practices for simulation design and evaluation.

A system for evaluating the use of media in CDC's National AIDS Information and Education Program.

PubMed

Salmon, C T; Jason, J

1991-01-01

The National AIDS Information and Education Program (NAIEP) commissioned the National Academy of Sciences to design a prototypical system of research for use in the evaluation of the agency's media campaign. It consists of four types of evaluation: formative, efficacy, process, and outcome. These types of evaluations are used to answer such questions as the following: What message strategies will work best? Can a campaign under optimal conditions be expected to make a difference? What interventions are actually delivered during the campaign? Has the campaign actually had an impact? How NAIEP has used the system and adapted it during 1 year of research activities is outlined, and examples from a variety of other social marketing programs are described.

Ancient Martian aeolian processes and palaeomorphology reconstructed from the Stimson formation on the lower slope of Aeolis Mons, Gale crater, Mars

USGS Publications Warehouse

Banham, Steve G.; Gupta, Sanjeev; Rubin, David M.; Watkins, Jessica A.; Sumner, Dawn Y.; Edgett, Kenneth S.; Grotzinger, John P.; Lewis, Kevin W.; Edgar, Lauren; Stack, Kathryn M.; Barnes, Robert; Bell, Jame F. III; Day, Mackenzie D.; Ewing, Ryan C.; Lapotre, Mathieu G.A.; Stein, Nathan T.; Rivera-Hernandez, Frances; Vasavada, Ashwin R.

2018-01-01

Reconstruction of the palaeoenvironmental context of Martian sedimentary rocks is central to studies of ancient Martian habitability and regional palaeoclimate history. This paper reports the analysis of a distinct aeolian deposit preserved in Gale crater, Mars, and evaluates its palaeomorphology, the processes responsible for its deposition, and its implications for Gale crater geological history and regional palaeoclimate. Whilst exploring the sedimentary succession cropping out on the northern flank of Aeolis Mons, Gale crater, the Mars Science Laboratory rover Curiosity encountered a decametre‐thick sandstone succession, named the Stimson formation, unconformably overlying lacustrine deposits of the Murray formation. The sandstone contains sand grains characterized by high roundness and sphericity, and cross‐bedding on the order of 1 m in thickness, separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops. The cross‐beds are composed of uniform thickness cross‐laminations interpreted as wind‐ripple strata. Cross‐sets are separated by sub‐horizontal bounding surfaces traceable for tens of metres across outcrops that are interpreted as dune migration surfaces. Grain characteristics and presence of wind‐ripple strata indicate deposition of the Stimson formation by aeolian processes. The absence of features characteristic of damp or wet aeolian sediment accumulation indicate deposition in a dry aeolian system. Reconstruction of the palaeogeomorphology suggests that the Stimson dune field was composed largely of simple sinuous crescentic dunes with a height of ca10 m, and wavelengths of ca 150 m, with local development of complex dunes. Analysis of cross‐strata dip‐azimuths indicates that the general dune migration direction and hence net sediment transport was towards the north‐east. The juxtaposition of a dry aeolian system unconformably above the lacustrine Murray formation represents starkly contrasting palaeoenvironmental and palaeoclimatic conditions. Stratigraphic relationships indicate that this transition records a significant break in time, with the Stimson formation being deposited after the Murray formation and stratigraphically higher Mount Sharp group rocks had been buried, lithified and subsequently eroded.

The wavefield of acoustic logging in a cased hole with a single casing—Part II: a dipole tool

NASA Astrophysics Data System (ADS)

Wang, Hua; Fehler, Michael

2018-02-01

The acoustic method, being the most effective method for cement bond evaluation, has been used by industry for more than a half century. However, the methods currently used are almost always focused on the first arrival (especially for sonic logging), which has limitations. We use a 3-D finite-difference method to numerically simulate the wavefields from a dipole source in a single-cased hole with different cement conditions. By using wavefield snapshots and dispersion curves, we interpret the characteristics of the modes in the models. We investigate the effect of source frequency, the thickness and location of fluid columns on different modes. The dipole wavefield in a single-cased hole consists of a leaky P (for frequency >10 kHz) from formation, formation flexural, and also some casing modes. Depending on the mode, their behaviour is sometimes sensitive to the existence of fluid between the cement and formation and sometimes sensitive to the existence of fluid between the casing and cement. The formation S velocity can be obtained from the formation flexural mode at low frequency. However, interference from high-order casing modes makes the leaky P invisible and P velocity determination difficult when the casing is not well cemented. The dispersion curve of the formation flexural mode is sensitive to the fluid thickness when fluid exists only at the interface between casing and cement. The fundamental casing dipole mode is only sensitive to the total fluid thickness in the annulus between casing and formation. Either the arrival time or amplitude of the high-order casing dipole mode is sensitive to the fluid column when the fluid column is next to the casing. We provide a table that summarizes the ability of different modes to detect fluid columns between various layers of casing, cement and formation. Based on the results, we suggest a data processing flow for field application, which will highly improve cement evaluation.

The Influence of Mo, Cr and B Alloying on Phase Transformation and Mechanical Properties in Nb Added High Strength Dual Phase Steels

NASA Astrophysics Data System (ADS)

Girina, O.; Fonstein, N.; Yakubovsky, O.; Panahi, D.; Bhattacharya, D.; Jansto, S.

The influence of Nb, Mo, Cr and B on phase transformations and mechanical properties are studied in a 0.15C-2.0Mn-0.3Si-0.020Ti dual phase steel separately and in combination. The formation and decomposition of austenite together with recrystallization of ferrite are evaluated by dilatometry and constructed CCT-diagrams in laboratory processed cold rolled material cooled after full austenitization and from intercritical temperature range. The effect of alloying elements on formation of austenite through their effect on initial hot rolled structure is taken into account. The interpretation of phase transformations during heating and cooling is supported by metallography. The effect of alloying elements on mechanical properties and structure are evaluated by annealing simulations. It has been shown that mechanical properties are strongly influenced by alloying additions such as Nb, Mo, Cr and B through their effect on ferrite formation during continuous cooling and corresponding enrichment of remaining austenite by carbon. Depending on combined effect of these alloying elements, different phase transformations can be promoted during cooling. This allows controlling of final microstructural constituents and mechanical properties.

Calcium carbonate solubility: a reappraisal of scale formation and inhibition.

PubMed

Gal, J Y; Bollinger, J C; Tolosa, H; Gache, N

1996-09-01

Considerable disparity exists in the published thermodynamic data for selected species in the Ca(2+) /CO(2)/H(2)O system near 25 degrees C and 1 atm pressure. Some authors doubt the significance of CaCO(3)(0)aq) complexes although there is experimental evidence of their occurrence. Evaluation of all the published experimental and estimated data for aqueous calcium carbonate species confirms that the consistent set of constants given by Plummer and Busenberg in 1982 is the best available, and suggests a formation constant log beta = 3.22 for CaCO(3)(0)(aq). This value was confirmed by additional experimental data and calculations using a specially developed computer program. The solubility s and solubility product K(s) are critically evaluated for each solid polymorph (amorphous CaCO(3), ikaite, vaterite, aragonite and calcite) using a hydrated ion pair model and we give coherent explanations for the calcium carbonate precipitation/dissolution process and the existence of supersaturated waters. The practical cases of scale formation and its inhibition by phosphonate-type compounds are discussed and explained with the same model, taking into account the CaCO(3)(0)(aq) species.

Performance evaluation and geologic utility of LANDSAT 4 TM and MSS scanners

NASA Technical Reports Server (NTRS)

Paley, H. N.

1983-01-01

Experiments using artificial targets (polyethylene sheets) to help calibrate and evaluate atmospheric effects as well as the radiometric precision and spatial characteristics of the NS-001 and TM sensor systems were attempted and show the technical feasibility of using plastic targets for such studies, although weather precluded successful TM data acquisition. Tapes for six LANDSAT 4 TM scenes were acquired and data processing began. Computer enhanced TM simulator and LANDSAT 4 TM data were compared for a porphyry copper deposit in Southern Arizona. Preliminary analyses performed on two TM scenes acquired in the CCT-PT format, show the TM data appear to contain a marked increase in geologically useful information; however, a number of instrumental processing artifacts may well limit the ability of the geologist to fully extract this information.

[Bromate reduction by granular activated carbon].

PubMed

Huang, Xin; Gao, Nai-yun; Lu, Pin-pin

2007-10-01

Batch experiments were conducted to evaluate the kinetics of reducing bromate to bromide by granular activated carbon. Solution conditions were studied in details, such as pH, ionic strength, temperature and initial bromate concentration. The results showed the removal capacity of GAC was positively relevant to surface basic functional groups. The whole process was inhibited by other anions in solution and the inhibition sequence was NO3(-) > SO4(2-) > Cl(-). Pseudo-second order rate equation and intraparticle diffusion model were applied to fit the process of bromate reduction and the process of bromide formation, respectively, with regression coefficients higher than 0.97 at most cases. Bromate removal was found to be favored under conditions with low pH value and low ionic strength. Both sorption rate of bromate and formation rate of bromide were decreased, and then increased along with the increase of temperature during 15-42 degree C. In this experiment, the maximum adsorption capacity of GAC is 769.23 micromol/g (98.4 mg/g), whereas the sorption process is slow and easily influenced. It is concluded that the sorption of bromate by the micropore portion of GAC was influenced by the release of bromide.

Chemical and Physical Interactions of Martian Surface Material

NASA Astrophysics Data System (ADS)

Bishop, J. L.

1999-09-01

A model of alteration and maturation of the Martian surface material is described involving both chemical and physical interactions. Physical processes involve distribution and mixing of the fine-grained soil particles across the surface and into the atmosphere. Chemical processes include reaction of sulfate, salt and oxidizing components of the soil particles; these agents in the soils deposited on rocks will chew through the rock minerals forming coatings and will bind surface soils together to form duricrust deposits. Formation of crystalline iron oxide/oxyhydroxide minerals through hydrothermal processes and of poorly crystalline and amorphous phases through palagonitic processes both contribute to formation of the soil particles. Chemical and physical alteration of these soil minerals and phases contribute to producing the chemical, magnetic and spectroscopic character of the Martian soil as observed by Mars Pathfinder and Mars Global Surveyor. Minerals such as maghemite/magnetite and jarosite/alunite have been observed in terrestrial volcanic soils near steam vents and may be important components of the Martian surface material. The spectroscopic properties of several terrestrial volcanic soils containing these minerals have been analyzed and evaluated in terms of the spectroscopic character of the surface material on Mars.

Allergen immunoassays--considerations for use of naturally incurred standards.

PubMed

Taylor, Steve L; Nordlee, Julie A; Niemann, Lynn M; Lambrecht, Debra M

2009-09-01

The enzyme-linked immunosorbent assay (ELISA) offers many advantages for the detection of potentially hazardous allergenic food residues that might become adventitious components of other foods during the course of food production and processing. ELISAs detect proteins, and food allergens are proteins. ELISAs are sufficiently sensitive and specific for detection of food allergen residues. ELISAs can also be produced in formats that are compatible with the industrial food processing environment. However, ELISAs also have disadvantages that should be carefully evaluated and widely recognized. Various food-processing operations can have profound effects on the detectability of allergenic food residues. ELISAs detect intact proteins but protein hydrolysates evade detection in some ELISA formats. The residual proteins present in some ingredients derived from commonly allergenic sources may also not be easily detected with ELISAs because of the nature of the protein residues remaining, e.g. lipophilic. Processing operations can dramatically lower the solubility of proteins. In some food formulations, heat processing, in particular, induces chemical modifications that can affect antibody binding to epitopes in the ELISA. The use of naturally incurred standards where allergenic food residues are incorporated into various representative food matrices and then processed in a manner similar to "real-world" food processing can reveal some of the limitations of allergen ELISAs. Methods for the preparation of naturally incurred standards in chocolate, cookie, muffin, ice cream, pasta, frankfurter, and cream of potato soup are provided as examples.

Mars brine formation experiment

NASA Technical Reports Server (NTRS)

Moore, Jeffrey M.; Bullock, Mark A.; Stoker, Carol R.

1992-01-01

Evaporites, particularly carbonates, nitrates, and sulfates, may be major sinks of volatiles scavenged from the martian atmosphere. Mars is thought to have once had a denser, warmer atmosphere that permitted the presence of liquid surface water. The conversion of atmospheric CO2 into carbonate is hypothesized to have degraded the martian climate to its present state of a generally subfreezing, desiccated desert. The rate for such a conversion under martian conditions is poorly known, so the time scale of climate degradation by this process cannot be easily evaluated. If some models are correct, carbonate formation may have been fast at geological time scales. The experiments of Booth and Kieffer also imply fast (10(exp 6) - 10(exp 7) yr) removal of the missing CO2 inventory, estimated to be 1 - 5 bar, by means of carbonate formation. The timing of formation of many of the fluvial features observed on Mars is, in large part, dependent on when and how fast the atmosphere changed. A knowledge of the rate at which carbonates and nitrates formed is also essential for assessing the probability that life, or its chemical precursors, could have developed on Mars. No previous experiments have quantitatively evaluated the rate of solution for a suite of mobile anions and cations from unaltered minerals and atmospheric gases into liquid water under Mars-like conditions. Such experiments are the focus of this task.

Evaluation of the influence of sulfur-based functional groups on the embedding of silver nanoparticles into the pores of MCM-41

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oliveira, Roselaine da S.; Camilo, Fernanda F.; Bizeto, Marcos A., E-mail: mabizeto@unifesp.br

The incorporation of noble metals in the pores of mesoporous silicas might produce materials with interesting catalytic and sensing capabilities, but the proper control of pore filling and the avoidance of nanoparticles migration to outside the pores are processes not yet completely understood. In this work, we evaluated the role of –SH and –SO{sub 3}H groups post-grafted into MCM-41 on the production of silver nanoparticles by using 1-butanol as reducing agent. Thiol groups were the most efficient on promoting the formation of nanoparticles within the pores. Conversely, sulfonic groups establish electrostatic interactions with silver cations that preclude the formation ofmore » nanoparticle in yields comparable to thiol groups. MCM-41 without functional groups did not have good affinity to silver and the nanoparticles are produced outside the pores. This study showed the importance on selecting an adequate surface functional group in order to obtain silver nanoparticles filling the pores of MCM-41. - Graphical abstract: Silver nanoparticles formation inside the pores of sulfur-groups functionalized mesoporous silica. - Highlights: • Silver nanoparticles formation inside the pores of mesoporous silica. • n-butanol as reducing agent of impregnated silver cations. • Tuning the silica surface properties by grafting sulfur-based functional groups. • Influence on the loading and distribution of the nanoparticles through the pores.« less

Fabrication and evaluation of enhanced diffusion bonded titanium honeycomb core sandwich panels with titanium aluminide face sheets

NASA Technical Reports Server (NTRS)

Hoffmann, E. K.; Bird, R. K.; Bales, T. T.

1989-01-01

A joining process was developed for fabricating lightweight, high temperature sandwich panels for aerospace applications using Ti-14Al-21Nb face sheets and Ti-3Al-2.5V honeycomb core. The process, termed Enhanced Diffusion Bonding (EDB), relies on the formation of a eutectic liquid through solid-state diffusion at elevated temperatures and isothermal solidification to produce joints in thin-gage titanium and titanium aluminide structural components. A technique employing a maskant on the honeycomb core was developed which permitted electroplating a controlled amount of EDB material only on the edges of the honeycomb core in order to minimize the structural weight and metallurgical interaction effects. Metallurgical analyses were conducted to determine the interaction effects between the EDB materials and the constituents of the sandwich structure following EDB processing. The initial mechanical evaluation was conducted with butt joint specimens tested at temperatures from 1400 - 1700 F. Further mechanical evaluation was conducted with EDB sandwich specimens using flatwise tension tests at temperatures from 70 - 1100 F and edgewise compression tests at ambient temperature.

BIOFILM FORMATION OF Vibrio cholerae ON STAINLESS STEEL USED IN FOOD PROCESSING.

PubMed

Fernández-Delgado, Milagro; Rojas, Héctor; Duque, Zoilabet; Suárez, Paula; Contreras, Monica; García-Amado, M Alexandra; Alciaturi, Carlos

2016-01-01

Vibrio cholerae represents a significant threat to human health in developing countries. This pathogen forms biofilms which favors its attachment to surfaces and its survival and transmission by water or food. This work evaluated the in vitro biofilm formation of V. cholerae isolated from clinical and environmental sources on stainless steel of the type used in food processing by using the environmental scanning electron microscopy (ESEM). Results showed no cell adhesion at 4 h and scarce surface colonization at 24 h. Biofilms from the environmental strain were observed at 48 h with high cellular aggregations embedded in Vibrio exopolysaccharide (VPS), while less confluence and VPS production with microcolonies of elongated cells were observed in biofilms produced by the clinical strain. At 96 h the biofilms of the environmental strain were released from the surface leaving coccoid cells and residual structures, whereas biofilms of the clinical strain formed highly organized structures such as channels, mushroom-like and pillars. This is the first study that has shown the in vitro ability of V. cholerae to colonize and form biofilms on stainless steel used in food processing.

Low temperature synthesis of CaO-SiO2 glasses having stable liquid-liquid immiscibility by sol-gel process

NASA Technical Reports Server (NTRS)

Bansal, Narottam P.

1990-01-01

Calcium silicate glass compositions lying within the liquid-liquid immiscibility dome of the phase diagram, which could not have been prepared by the conventional melting method, were synthesized by the sol-gel process. Hydrolysis and polycondensation of tetraethyl orthosilicate (TEOS) solutions containing up to 20 mol percent calcium nitrate resulted in the formation of clear and transparent gels. The gel formation time decreased with increase in water:TEOS mole ratio, calcium content, and the reaction temperature. Smaller values of gel times in the presence of calcium nitrate are probably caused by lowering of the ionic charge on the sol particles by the salt present. The gelation activation energy, E(sub gel), was evaluated from temperature dependence of the gel time. Presence of Ca(2+) ions or the water:TEOS mole ratio did not have an appreciable effect on the value of E(sub gel). Presence of glycerol in the solution helped in the formation of crack-free monolithic gel specimens. Chemical and structural changes occurring in the gels, as a function of the heat treatments, have been monitored using DTA, TGA, IR-spectroscopy, x ray diffraction, surface area and pore size distribution measurements.

Low temperature synthesis of CaO-SiO2 glasses having stable liquid-liquid immiscibility by the sol-gel process

NASA Technical Reports Server (NTRS)

Bansal, N. P.

1992-01-01

Calcium silicate glass compositions lying within the liquid-liquid immiscibility dome of the phase diagram, which could not have been prepared by the conventional melting method, were synthesized by the sol-gel process. Hydrolysis and polycondensation of tetraethyl orthosilicate (TEOS) solutions containing up to 20 mol percent calcium nitrate resulted in the formation of clear and transparent gels. The gel formation time decreased with increase in water: TEOS mole ratio, calcium content, and the reaction temperature. Smaller values of gel times in the presence of calcium nitrate are probably caused by lowering of the ionic charge on the sol particles by the salt present. The gelation activation energy, E(sub gel), was evaluated from temperature dependence of the gel time. Presence of Ca(2+) ions or the water:TEOS mole ratio did not have an appreciable effect on the value of E(sub gel). Presence of glycerol in the solution helped in the formation of crack-free monolithic gel specimens. Chemical and structural changes occurring in the gels, as a function of the heat treatments, have been monitored using DTA, TGA, IR-spectroscopy, X-ray diffraction, surface area and pore size distribution measurements.

Right timing in formative program evaluation.

PubMed

Hall, Jori; Freeman, Melissa; Roulston, Kathy

2014-08-01

Since many educational researchers and program developers have limited knowledge of formative evaluation, formative data may be underutilized during the development and implementation of an educational program. The purpose of this article is to explain how participatory, responsive, educative, and qualitative approaches to formative evaluation can facilitate a partnership between evaluators and educational researchers and program managers to generate data useful to inform program implementation and improvement. This partnership is critical, we argue, because it enables an awareness of when to take appropriate action to ensure successful educational programs or "kairos". To illustrate, we use examples from our own evaluation work to highlight how formative evaluation may facilitate opportune moments to (1) define the substance and purpose of a program, (2) develop understanding and awareness of the cultural interpretations of program participants, and (3) show the relevance of stakeholder experiences to program goals. Copyright © 2014 Elsevier Ltd. All rights reserved.

Biofilms of Enterococcus faecalis and Enterococcus faecium isolated from the processing of ricotta and the control of these pathogens through cleaning and sanitization procedures.

PubMed

da Silva Fernandes, Meg; Kabuki, Dirce Yorika; Kuaye, Arnaldo Yoshiteru

2015-05-04

The biofilm formation of Enterococcus faecalis and Enterococcus faecium isolated from the processing of ricotta on stainless steel coupons was evaluated, and the effect of cleaning and sanitization procedures in the control of these biofilms was determined. The formation of biofilms was observed while varying the incubation temperature (7, 25 and 39°C) and time (0, 1, 2, 4, 6 and 8 days). At 7°C, the counts of E. faecalis and E. faecium were below 2 log10 CFU/cm(2). For the temperatures of 25 and 39°C, after 1 day, the counts of E. faecalis and E. faecium were 5.75 and 6.07 log10 CFU/cm(2), respectively, which is characteristic of biofilm formation. The tested sanitation procedures a) acid-anionic tensioactive cleaning, b) anionic tensioactive cleaning+sanitizer and c) acid-anionic tensioactive cleaning+sanitizer were effective in removing the biofilms, reducing the counts to levels below 0.4 log10 CFU/cm(2). The sanitizer biguanide was the least effective, and peracetic acid was the most effective. These studies revealed the ability of enterococci to form biofilms and the importance of the cleaning step and the type of sanitizer used in sanitation processes for the effective removal of biofilms. Copyright © 2015 Elsevier B.V. All rights reserved.

Spatial characterization of soil properties and influence in soil formation in oak-grassland of Sierra Morena, S Spain

NASA Astrophysics Data System (ADS)

Román-Sánchez, Andrea; Cáceres, Francisco; Pédèches, Remi; Giráldez Cervera, Juan Vicente; Vanwalleghem, Tom

2016-04-01

The Mediterranean oak-grassland ecosystem is very important for the rural economy and for the biodiversity of south-western European countries like Spain and Portugal. Nevertheless these ecosystems are not well characterized especially their soils. In this report soil carbon has been evaluated and related to other properties. The principal factors controlling the structure, productivity and evolution of forest ecosystems are bedrock, climate, relief, vegetation and time. Soil carbon has an important influence in the soil and ecosystem structures. The purpose of this study is to determine the relationship between relief, soil properties, spatial distribution of soil carbon and their influence in soil formation and geomorphology. This work is part of another study which aims to elucidate the processes involved in the soil formation and to examine their behaviour on long-term with a modelling. In our study area, located in oak-grassland of Sierra Morena, in Cordoba, S Spain, have been studied 67 points at 6 depths in 262 hectares in order to determine carbon content varying between 0-6%, soil properties such as soil depth between 0-4 m, horizon depth and the rocks amount in surface. The relationship between the soil carbon, soil properties and the relief characteristic like slope, aspect, curvature can shed light the processes that affect the mechanisms of bedrock weathering and their interrelationship with geomorphological processes.

ArrayBridge: Interweaving declarative array processing with high-performance computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xing, Haoyuan; Floratos, Sofoklis; Blanas, Spyros

Scientists are increasingly turning to datacenter-scale computers to produce and analyze massive arrays. Despite decades of database research that extols the virtues of declarative query processing, scientists still write, debug and parallelize imperative HPC kernels even for the most mundane queries. This impedance mismatch has been partly attributed to the cumbersome data loading process; in response, the database community has proposed in situ mechanisms to access data in scientific file formats. Scientists, however, desire more than a passive access method that reads arrays from files. This paper describes ArrayBridge, a bi-directional array view mechanism for scientific file formats, that aimsmore » to make declarative array manipulations interoperable with imperative file-centric analyses. Our prototype implementation of ArrayBridge uses HDF5 as the underlying array storage library and seamlessly integrates into the SciDB open-source array database system. In addition to fast querying over external array objects, ArrayBridge produces arrays in the HDF5 file format just as easily as it can read from it. ArrayBridge also supports time travel queries from imperative kernels through the unmodified HDF5 API, and automatically deduplicates between array versions for space efficiency. Our extensive performance evaluation in NERSC, a large-scale scientific computing facility, shows that ArrayBridge exhibits statistically indistinguishable performance and I/O scalability to the native SciDB storage engine.« less

FY16 Annual Accomplishments - Waste Form Development and Performance: Evaluation Of Ceramic Waste Forms - Comparison Of Hot Isostatic Pressed And Melt Processed Fabrication Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amoroso, J.; Dandeneau, C.

FY16 efforts were focused on direct comparison of multi-phase ceramic waste forms produced via melt processing and HIP methods. Based on promising waste form compositions previously devised at SRNL, simulant material was prepared at SRNL and a portion was sent to the Australian Nuclear Science and Technology Organization (ANSTO) for HIP treatments, while the remainder of the material was melt processed at SRNL. The microstructure, phase formation, elemental speciation, and leach behavior, and radiation stability of the fabricated ceramics was performed. In addition, melt-processed ceramics designed with different fractions of hollandite, zirconolite, perovskite, and pyrochlore phases were investigated. for performancemore » and properties.« less

Dioxin formation and control in a gasification-melting plant.

PubMed

Kawamoto, Katsuya; Miyata, Haruo

2015-10-01

We investigated dioxin formation and removal in a commercial thermal waste treatment plant employing a gasification and melting process that has become widespread in the last decade in Japan. The aim was to clarify the possibility of dioxin formation in a process operation at high temperatures and the applicability of catalytic decomposition of dioxins. Also, the possible use of dioxin surrogate compounds for plant monitoring was further evaluated. The main test parameter was the influence of changes in the amount and type of municipal solid waste (MSW) supplied to the thermal waste treatment plant which from day to day operation is a relevant parameter also from commercial perspective. Here especially, the plastic content on dioxin release was assessed. The following conclusions were reached: (1) disturbance of combustion by adding plastic waste above the capability of the system resulted in a considerable increase in dioxin content of the flue gas at the inlet of the bag house and (2) bag filter equipment incorporating a catalytic filter effectively reduced the gaseous dioxin content below the standard of 0.1 ng toxic equivalency (TEQ)/m(3) N, by decomposition and partly adsorption, as was revealed by total dioxin mass balance and an increased levels in the fly ash. Also, the possible use of organohalogen compounds as dioxin surrogate compounds for plant monitoring was further evaluated. The levels of these surrogates did not exceed values corresponding to 0.1 ng TEQ/m(3) N dioxins established from former tests. This further substantiated that surrogate measurement therefore can well reflect dioxin levels.

The Influence of the Coating Deposition Process on the Interdiffusion Behavior Between Nickel-Based Superalloys and MCrAlY Bond Coats

NASA Astrophysics Data System (ADS)

Elsaß, M.; Frommherz, M.; Oechsner, M.

2018-02-01

In this work, interdiffusion between two nickel-based superalloys and two MCrAlY bond coats is investigated. The MCrAlY bond coats were applied using two different spraying processes, high velocity oxygen fuel spraying (HVOF) and low-pressure plasma spraying. Of primary interest is the evolution of Kirkendall porosity, which can form at the interface between substrate and bond coat and depends largely on the chemical compositions of the coating and substrate. Experimental evidence further suggested that the formation of Kirkendall porosity depends on the coating deposition process. Formation of porosity at the interface causes a degradation of the bonding strength between substrate and coating. After coating deposition, the samples were annealed at 1050 °C for up to 2000 h. Microstructural and compositional analyses were performed to determine and evaluate the Kirkendall porosity. The results reveal a strong influence of both the coating deposition process and the chemical compositions. The amount of Kirkendall porosity formed, as well as the location of appearance, is largely influenced by the coating deposition process. In general, samples with bond coats applied by means of HVOF show accelerated element diffusion. It is hypothesized that recrystallization of the substrate material is a main root cause for these observations.

Characterization of Biogenic Gas and Mineral Formation Process by Denitrification in Porous Media

NASA Astrophysics Data System (ADS)

Hall, C. A.; Kim, D.; Mahabadi, N.; van Paassen, L. A.

2017-12-01

Biologically mediated processes have been regarded and developed as an alternative approach to traditional ground improvement techniques. Denitrification has been investigated as a potential ground improvement process towards liquefaction hazard mitigation. During denitrification, microorganisms reduce nitrate to dinitrogen gas and facilitate calcium carbonate precipitation as a by-product under adequate environmental conditions. The formation of dinitrogen gas desaturates soils and allows for potential pore pressure dampening during earthquake events. While, precipitation of calcium carbonate can improve the mechanical properties by filling the voids and cementing soil particles. As a result of small changes in gas and mineral phases, the mechanical properties of soils can be significantly affected. Prior research has primarily focused on quantitative analysis of overall residual calcium carbonate mineral and biogenic gas products in lab-scale porous media. However, the distribution of these products at the pore-scale has not been well-investigated. In this research, denitrification is activated in a microfluidic chip simulating a homogenous pore structure. The denitrification process is monitored by sequential image capture, where gas and mineral phase changes are evaluated by image processing. Analysis of these images correspond with previous findings, which demonstrate that biogenic gas behaviour at the pore scale is affected by the balance between reaction, diffusion, and convection rates.

Gas injection to inhibit migration during an in situ heat treatment process

DOEpatents

Kuhlman, Myron Ira; Vinegar; Harold J.; Baker, Ralph Sterman; Heron, Goren

2010-11-30

Methods of treating a subsurface formation are described herein. Methods for treating a subsurface treatment area in a formation may include introducing a fluid into the formation from a plurality of wells offset from a treatment area of an in situ heat treatment process to inhibit outward migration of formation fluid from the in situ heat treatment process.

iTRAQ-Based Proteomic Analysis Reveals Potential Regulation Networks of IBA-Induced Adventitious Root Formation in Apple

PubMed Central

Lei, Chao; Fan, Sheng; Li, Ke; Meng, Yuan; Mao, Jiangping; Han, Mingyu; Zhao, Caiping; Bao, Lu; Zhang, Dong

2018-01-01

Adventitious root (AR) formation, which is controlled by endogenous and environmental factors, is indispensable for vegetative asexual propagation. However, comprehensive proteomic data on AR formation are still lacking. The aim of this work was to study indole-3-butyric acid (IBA)-induced AR formation in the dwarf apple rootstock ‘T337’. In this study, the effect of IBA on AR formation was analysed. Subsequent to treatment with IBA, both the rooting rate and root length of ‘T337’ increased significantly. An assessment of hormone levels in basal stem cuttings suggested that auxin, abscisic acid, and brassinolide were higher in basal stem cuttings that received the exogenous IBA application; while zeatin riboside, gibberellins, and jasmonic acid were lower than non-treated basal stem cuttings. To explore the underlying molecular mechanism, an isobaric tags for relative and absolute quantification (iTRAQ)-based proteomic technique was employed to identify the expression profiles of proteins at a key period of adventitious root induction (three days after IBA treatment). In total, 3355 differentially expressed proteins (DEPs) were identified. Many DEPs were closely related to carbohydrate metabolism and energy production, protein homeostasis, reactive oxygen and nitric oxide signaling, and cell wall remodeling biological processes; as well as the phytohormone signaling, which was the most critical process in response to IBA treatment. Further, RT-qPCR analysis was used to evaluate the expression level of nine genes that are involved in phytohormone signaling and their transcriptional levels were mostly in accordance with the protein patterns. Finally, a putative work model was proposed. Our study establishes a foundation for further research and sheds light on IBA-mediated AR formation in apple as well as other fruit rootstock cuttings. PMID:29495482

Using Structured e-Forum to Support the Legislation Formation Process

NASA Astrophysics Data System (ADS)

Xenakis, Alexandros; Loukis, Euripides

Many public policy problems are 'wicked', being characterised by high complexity, many heterogeneous views and conflicts among various stakeholders, and also lack of mathematically 'optimal' solutions and predefined algorithms for calculating them. The best approach for addressing such problems is through consultation and argumentation among stakeholders. The e-participation research has investigated and suggested several ICT tools for this purpose, such as e-forum, e-petition and e-community tools. This paper investigates the use of an advanced ICT tool, the structured e-forum, for addressing such wicked problems associated with the legislation formation. For this purpose we designed, implemented and evaluated two pilot e-consultations on legislation under formation in the Parliaments of Austria and Greece using a structured e-forum tool based on the Issue Based Information Systems (IBIS) framework. The conclusions drawn reveal the advantages offered by the structured e-forum, but also its difficulties as well.

Evaluation of "credit card" libraries for inhibition of HIV-1 gp41 fusogenic core formation.

PubMed

Xu, Yang; Lu, Hong; Kennedy, Jack P; Yan, Xuxia; McAllister, Laura A; Yamamoto, Noboru; Moss, Jason A; Boldt, Grant E; Jiang, Shibo; Janda, Kim D

2006-01-01

Protein-protein interactions are of critical importance in biological systems, and small molecule modulators of such protein recognition and intervention processes are of particular interest. To investigate this area of research, we have synthesized small-molecule libraries that can disrupt a number of biologically relevant protein-protein interactions. These library members are designed upon planar motif, appended with a variety of chemical functions, which we have termed "credit-card" structures. From two of our "credit-card" libraries, a series of molecules were uncovered which act as inhibitors against the HIV-1 gp41 fusogenic 6-helix bundle core formation, viral antigen p24 formation, and cell-cell fusion at low micromolar concentrations. From the high-throughput screening assays we utilized, a selective index (SI) value of 4.2 was uncovered for compound 2261, which bodes well for future structure activity investigations and the design of more potent gp41 inhibitors.

Evaluation of the amount of nanoparticles emitted in welding fume from stainless steel using different shielding gases.

PubMed

Pacheco, R P; Gomes, J F; Miranda, R M; Quintino, M L

2017-05-01

The primary objective of this study was to correlate the emission of macro and nanoparticles released during the process of metal inert gas/metal active gas (MIG/MAG) of stainless steel with different gas mixtures. Using different gas mixtures with different heat inputs, it was possible to determine fume formation rates and surface areas of nanoparticles with alveolar lung deposition capacity. It was found, how the various transfer modes and the type of gas protection, in particular, the percentage of active elements in the chemical composition of the gas, affect the amount of fumes generated and also the generation of nanoparticles with a high capacity of deposition. The spray transfer mode always shows higher values of nanoparticles surface area, unlike the fume formation rates. Among the tested mixtures 82%Ar + 18%CO 2 generates higher emissions of nanoparticles as well as fume formation rates.

Establishing a Geologic Baseline Of Cape Canaveral's Natural Landscape: Black Point Drive

NASA Technical Reports Server (NTRS)

Parkinson, Randall W.

2001-01-01

The goal of this project is to identify the process responsible for the formation of geomorphic features in the Black Point Drive area of Merritt Island National Wildlife Refuge/Kennedy Space Center (MINWR/KSC), northwest Cape Canaveral. This study confirms the principal landscape components (geomorphology) of Black Point Drive reflect interaction between surficial sediments deposited in association with late-Quaternary sea-level highstands and the chemical evolution of late-Cenozoic subsurface limestone formations. The Black Point Drive landscape consists of an undulatory mesic terrain which dips westward into myriad circular and channel-like depression marshes and lakes. This geomorphic gradient may reflect: (1) spatial distinctions in the elevation, character or age of buried (pre-Miocene) limestone formations, (2) dissolution history of late-Quaternary coquina and/or (3) thickness of unconsolidated surface sediment. More detailed evaluation of subsurface data will be necessary before this uncertainty can be resolved.

Establishing A Geologic Baseline of Cape Canaveral''s Natural Landscape: Black Point Drive

NASA Technical Reports Server (NTRS)

Parkinson, Randall W.

2002-01-01

The goal of this project is to identify the process responsible for the formation of geomorphic features in the Black Point Drive area of Merritt Island National Wildlife Refuge/Kennedy Space Center (MINWR/KSC), northwest Cape Canaveral. This study confirms the principal landscape components (geomorphology) of Black Point Drive reflect interaction between surficial sediments deposited in association with late-Quaternary sea-level highstands and the chemical evolution of late-Cenozoic sub-surface limestone formations. The Black Point Drive landscape consists of an undulatory mesic terrain which dips westward into myriad circular and channel-like depression marshes and lakes. This geomorphic gradient may reflect: (1) spatial distinctions in the elevation, character or age of buried (pre-Miocene) limestone formations, (2) dissolution history of late-Quaternary coquina and/or (3) thickness of unconsolidated surface sediment. More detailed evaluation of subsurface data will be necessary before this uncertain0 can be resolved.

Constructive Student Feedback: Online vs. Traditional Course Evaluations

ERIC Educational Resources Information Center

Donovan, Judy; Mader, Cynthia E.; Shinsky, John

2010-01-01

Substantial efforts have been made recently to compare the effectiveness of traditional course formats to alternative formats (most often, online delivery compared to traditional on-site delivery). This study examines, not the delivery format but rather the evaluation format. It compares traditional paper and pencil methods for course evaluation…

78 FR 29338 - Applications for New Award; Technical Assistance To Improve State Data Capacity-National...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

... formative and summative evaluations of the project; Note: The following Web site provides more information... plan, linked to the project's logic model, for a formative evaluation of the project's activities. The plan must describe how the formative evaluation will use clear performance objectives to ensure...

Numerical Modeling of River Ice Processes on the Lower Nelson River

NASA Astrophysics Data System (ADS)

Malenchak, Jarrod Joseph

Water resource infrastructure in cold regions of the world can be significantly impacted by the existence of river ice. Major engineering concerns related to river ice include ice jam flooding, the design and operation of hydropower facilities and other hydraulic structures, water supplies, as well as ecological, environmental, and morphological effects. The use of numerical simulation models has been identified as one of the most efficient means by which river ice processes can be studied and the effects of river ice be evaluated. The continued advancement of these simulation models will help to develop new theories and evaluate potential mitigation alternatives for these ice issues. In this thesis, a literature review of existing river ice numerical models, of anchor ice formation and modeling studies, and of aufeis formation and modeling studies is conducted. A high level summary of the two-dimensional CRISSP numerical model is presented as well as the developed freeze-up model with a focus specifically on the anchor ice and aufeis growth processes. This model includes development in the detailed heat transfer calculations, an improved surface ice mass exchange model which includes the rapids entrainment process, and an improved dry bed treatment model along with the expanded anchor ice and aufeis growth model. The developed sub-models are tested in an ideal channel setting as somewhat of a model confirmation. A case study of significant anchor ice and aufeis growth on the Nelson River in northern Manitoba, Canada, will be the primary field test case for the anchor ice and aufeis model. A second case study on the same river will be used to evaluate the surface ice components of the model in a field setting. The results from these cases studies will be used to highlight the capabilities and deficiencies in the numerical model and to identify areas of further research and model development.

[Methodologic developmental principles of standardized surveys within the scope of social gerontologic studies].

PubMed

Bansemir, G

1987-01-01

The conception and evaluation of standardized oral or written questioning as quantifying instruments of research orientate by the basic premises of Marxist-Leninist theory of recognition and general scientific logic. In the present contribution the socio-gerontological research process is outlined in extracts. By referring to the intrinsic connection between some of its essential components--problem, formation of hypotheses, obtaining indicators/measurement, preliminary examination, evaluation-as well as to typical errors and (fictitious) examples of practical research, this contribution contrasts the natural, apparently uncomplicated course of structured questioning with its qualitative methodological fundamentals and demands.

SEM evaluation of metallization on semiconductors. [Scanning Electron Microscope

NASA Technical Reports Server (NTRS)

Fresh, D. L.; Adolphsen, J. W.

1974-01-01

A test method for the evaluation of metallization on semiconductors is presented and discussed. The method has been prepared in MIL-STD format for submittal as a proposed addition to MIL-STD-883. It is applicable to discrete devices and to integrated circuits and specifically addresses batch-process oriented defects. Quantitative accept/reject criteria are given for contact windows, other oxide steps, and general interconnecting metallization. Figures are provided that illustrate typical types of defects. Apparatus specifications, sampling plans, and specimen preparation and examination requirements are described. Procedures for glassivated devices and for multi-metal interconnection systems are included.

The evaluation of (social-)psychological comfort in clothing, a possible approach

NASA Astrophysics Data System (ADS)

Matté, L. L.; Broega, A. C.

2017-10-01

This paper presents the first results of a PhD research on psychological comfort of clothing. In order to understand and conceptualize the psychological aspects of clothing comfort, a variation of the Delphi Method was used to seek opinions from experts. This method was chosen because of its consensus-building features. The results were obtained from a qualitative text analysis, conducted over the experts’ responses to the first round of questions. The analytic process shed some light on the formation of the psychological comfort concept as well as the potential attributes to be evaluated when assessing this comfort dimension.

Innovation and design of a web-based pain education interprofessional resource.

PubMed

Lax, Leila; Watt-Watson, Judy; Lui, Michelle; Dubrowski, Adam; McGillion, Michael; Hunter, Judith; Maclennan, Cameron; Knickle, Kerry; Robb, Anja; Lapeyre, Jaime

2011-01-01

The present article describes educational innovation processes and design of a web-based pain interprofessional resource for prelicensure health science students in universities across Canada. Operationalization of educational theory in design coupled with formative evaluation of design are discussed, along with strategies that support collaborative innovation. Educational design was driven by content, theory and evaluation. Pain misbeliefs and teaching points along the continuum from acute to persistent pain were identified. Knowledge-building theory, situated learning, reflection and novel designs for cognitive scaffolding were then employed. Design research principles were incorporated to inform iterative and ongoing design. An authentic patient case was constructed, situated in interprofessional complex care to highlight learning objectives related to pre-operative, postoperative and treatment up to one year, for a surgical cancer patient. Pain mechanisms, assessment and management framed content creation. Knowledge building scaffolds were used, which included video simulations, embedded resources, concurrent feedback, practice-based reflective exercises and commentaries. Scaffolds were refined to specifically support knowledge translation. Illustrative commentaries were designed to explicate pain misbeliefs and best practices. Architecture of the resource was mapped; a multimedia, interactive prototype was created. This pain education resource was developed primarily for individual use, with extensions for interprofessional collective discourse. Translation of curricular content scripts into representation maps supported the collaborative design process by establishing a common visual language. The web-based prototype will be formatively and summatively evaluated to assess pedagogic design, knowledge-translation scaffolds, pain knowledge gains, relevance, feasibility and fidelity of this educational innovation.

Optimization and evaluation of metal injection molding by using X-ray tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Shidi; Zhang, Ruijie; Qu, Xuanhui, E-mail: quxh@ustb.edu.cn

2015-06-15

6061 aluminum alloy and 316L stainless steel green bodies were obtained by using different injection parameters (injection pressure, speed and temperature). After injection process, the green bodies were scanned by X-ray tomography. The projection and reconstruction images show the different kinds of defects obtained by the improper injection parameters. Then, 3D rendering of the Al alloy green bodies was used to demonstrate the spatial morphology characteristics of the serious defects. Based on the scanned and calculated results, it is convenient to obtain the proper injection parameters for the Al alloy. Then, reasons of the defect formation were discussed. During moldmore » filling, the serious defects mainly formed in the case of low injection temperature and high injection speed. According to the gray value distribution of projection image, a threshold gray value was obtained to evaluate whether the quality of green body can meet the desired standard. The proper injection parameters of 316L stainless steel can be obtained efficiently by using the method of analyzing the Al alloy injection. - Highlights: • Different types of defects in green bodies were scanned by using X-ray tomography. • Reasons of the defect formation were discussed. • Optimization of the injection parameters can be simplified greatly by the way of X-ray tomography. • Evaluation standard of the injection process can be obtained by using the gray value distribution of projection image.« less

Fracture Dissolution of Carbonate Rock: An Innovative Process for Gas Storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

James W. Castle; Ronald W. Falta; David Bruce

2006-10-31

The goal of the project is to develop and assess the feasibility and economic viability of an innovative concept that may lead to commercialization of new gas-storage capacity near major markets. The investigation involves a new approach to developing underground gas storage in carbonate rock, which is present near major markets in many areas of the United States. Because of the lack of conventional gas storage and the projected growth in demand for storage capacity, many of these areas are likely to experience shortfalls in gas deliverability. Since depleted gas reservoirs and salt formations are nearly non-existent in many areas,more » alternatives to conventional methods of gas storage are required. The need for improved methods of gas storage, particularly for ways to meet peak demand, is increasing. Gas-market conditions are driving the need for higher deliverability and more flexibility in injection/withdrawal cycling. In order to meet these needs, the project involves an innovative approach to developing underground storage capacity by creating caverns in carbonate rock formations by acid dissolution. The basic concept of the acid-dissolution method is to drill to depth, fracture the carbonate rock layer as needed, and then create a cavern using an aqueous acid to dissolve the carbonate rock. Assessing feasibility of the acid-dissolution method included a regional geologic investigation. Data were compiled and analyzed from carbonate formations in six states: Indiana, Ohio, Kentucky, West Virginia, Pennsylvania, and New York. To analyze the requirements for creating storage volume, the following aspects of the dissolution process were examined: weight and volume of rock to be dissolved; gas storage pressure, temperature, and volume at depth; rock solubility; and acid costs. Hydrochloric acid was determined to be the best acid to use because of low cost, high acid solubility, fast reaction rates with carbonate rock, and highly soluble products (calcium chloride) that allow for the easy removal of calcium waste from the well. Physical and chemical analysis of core samples taken from prospective geologic formations for the acid dissolution process confirmed that many of the limestone samples readily dissolved in concentrated hydrochloric acid. Further, some samples contained oily residues that may help to seal the walls of the final cavern structure. These results suggest that there exist carbonate rock formations well suited for the dissolution technology and that the presence of inert impurities had no noticeable effect on the dissolution rate for the carbonate rock. A sensitivity analysis was performed for characteristics of hydraulic fractures induced in carbonate formations to enhance the dissolution process. Multiple fracture simulations were conducted using modeling software that has a fully 3-D fracture geometry package. The simulations, which predict the distribution of fracture geometry and fracture conductivity, show that the stress difference between adjacent beds is the physical property of the formations that has the greatest influence on fracture characteristics by restricting vertical growth. The results indicate that by modifying the fracturing fluid, proppant type, or pumping rate, a fracture can be created with characteristics within a predictable range, which contributes to predicting the geometry of storage caverns created by acid dissolution of carbonate formations. A series of three-dimensional simulations of cavern formation were used to investigate three different configurations of the acid-dissolution process: (a) injection into an open borehole with production from that same borehole and no fracture; (b) injection into an open borehole with production from that same borehole, with an open fracture; and (c) injection into an open borehole connected by a fracture to an adjacent borehole from which the fluids are produced. The two-well configuration maximizes the overall mass transfer from the rock to the fluid, but it results in a complex cavern shape. Numerical simulations were performed to evaluate the ability of storage caverns produced by the acid-dissolution method to store natural gas. In addition, analyses were conducted to evaluate cavern stability during gas injection and withdrawal from storage caverns created in carbonate formations by the acid-dissolution method. The stability analyses were conducted using FLAC2D, a commercially available geotechnical analysis and design software. The analyses indicate that a tall cylindrical cavern with a domed roof and floor will be stable under the expected range of in situ and operational conditions. This result suggests that it should be feasible to avoid mechanical instabilities that could potentially diminish the effectiveness of the storage facility. The feasibility of using pressure transients measured at the ground surface was investigated as a means to evaluate (Abstract truncated)« less

Moralized Rationality: Relying on Logic and Evidence in the Formation and Evaluation of Belief Can Be Seen as a Moral Issue.

PubMed

Ståhl, Tomas; Zaal, Maarten P; Skitka, Linda J

2016-01-01

In the present article we demonstrate stable individual differences in the extent to which a reliance on logic and evidence in the formation and evaluation of beliefs is perceived as a moral virtue, and a reliance on less rational processes is perceived as a vice. We refer to this individual difference variable as moralized rationality. Eight studies are reported in which an instrument to measure individual differences in moralized rationality is validated. Results show that the Moralized Rationality Scale (MRS) is internally consistent, and captures something distinct from the personal importance people attach to being rational (Studies 1-3). Furthermore, the MRS has high test-retest reliability (Study 4), is conceptually distinct from frequently used measures of individual differences in moral values, and it is negatively related to common beliefs that are not supported by scientific evidence (Study 5). We further demonstrate that the MRS predicts morally laden reactions, such as a desire for punishment, of people who rely on irrational (vs. rational) ways of forming and evaluating beliefs (Studies 6 and 7). Finally, we show that the MRS uniquely predicts motivation to contribute to a charity that works to prevent the spread of irrational beliefs (Study 8). We conclude that (1) there are stable individual differences in the extent to which people moralize a reliance on rationality in the formation and evaluation of beliefs, (2) that these individual differences do not reduce to the personal importance attached to rationality, and (3) that individual differences in moralized rationality have important motivational and interpersonal consequences.

Moralized Rationality: Relying on Logic and Evidence in the Formation and Evaluation of Belief Can Be Seen as a Moral Issue

PubMed Central

Skitka, Linda J.

2016-01-01

In the present article we demonstrate stable individual differences in the extent to which a reliance on logic and evidence in the formation and evaluation of beliefs is perceived as a moral virtue, and a reliance on less rational processes is perceived as a vice. We refer to this individual difference variable as moralized rationality. Eight studies are reported in which an instrument to measure individual differences in moralized rationality is validated. Results show that the Moralized Rationality Scale (MRS) is internally consistent, and captures something distinct from the personal importance people attach to being rational (Studies 1–3). Furthermore, the MRS has high test-retest reliability (Study 4), is conceptually distinct from frequently used measures of individual differences in moral values, and it is negatively related to common beliefs that are not supported by scientific evidence (Study 5). We further demonstrate that the MRS predicts morally laden reactions, such as a desire for punishment, of people who rely on irrational (vs. rational) ways of forming and evaluating beliefs (Studies 6 and 7). Finally, we show that the MRS uniquely predicts motivation to contribute to a charity that works to prevent the spread of irrational beliefs (Study 8). We conclude that (1) there are stable individual differences in the extent to which people moralize a reliance on rationality in the formation and evaluation of beliefs, (2) that these individual differences do not reduce to the personal importance attached to rationality, and (3) that individual differences in moralized rationality have important motivational and interpersonal consequences. PMID:27851777

Laser Ignition Technology for Bi-Propellant Rocket Engine Applications

NASA Technical Reports Server (NTRS)

Thomas, Matthew E.; Bossard, John A.; Early, Jim; Trinh, Huu; Dennis, Jay; Turner, James (Technical Monitor)

2001-01-01

The fiber optically coupled laser ignition approach summarized is under consideration for use in igniting bi-propellant rocket thrust chambers. This laser ignition approach is based on a novel dual pulse format capable of effectively increasing laser generated plasma life times up to 1000 % over conventional laser ignition methods. In the dual-pulse format tinder consideration here an initial laser pulse is used to generate a small plasma kernel. A second laser pulse that effectively irradiates the plasma kernel follows this pulse. Energy transfer into the kernel is much more efficient because of its absorption characteristics thereby allowing the kernel to develop into a much more effective ignition source for subsequent combustion processes. In this research effort both single and dual-pulse formats were evaluated in a small testbed rocket thrust chamber. The rocket chamber was designed to evaluate several bipropellant combinations. Optical access to the chamber was provided through small sapphire windows. Test results from gaseous oxygen (GOx) and RP-1 propellants are presented here. Several variables were evaluated during the test program, including spark location, pulse timing, and relative pulse energy. These variables were evaluated in an effort to identify the conditions in which laser ignition of bi-propellants is feasible. Preliminary results and analysis indicate that this laser ignition approach may provide superior ignition performance relative to squib and torch igniters, while simultaneously eliminating some of the logistical issues associated with these systems. Further research focused on enhancing the system robustness, multiplexing, and window durability/cleaning and fiber optic enhancements is in progress.

A STUDY OF PROCESS CONTRIBUTION TO PM 2.5 FORMATION DURING THE 2004 ICARTT PERIOD USING THE ETA-CMAQ FORECAST MODEL OVER THE NORTHEASTERN U.S.

EPA Science Inventory

In this study, first, we evaluate the Eta-CMAQ forecast model performance for the chemical components (SO₄^2-, NO₃^-, and NH₄⁺) of PM_2.5 with the observational data from aircraft flights during the 2004 In...

Characterization of the Reproductive Toxicity of Depleted Uranium

DTIC Science & Technology

2005-06-01

thymus, kidney, liver, skeletal muscle, uterus, ovaries, testes, bone marrow. Requested tissues were identified, embedded in paraffin and trimmed...located (all but 2-females), a cross section of the uterus was processed for evaluation. Each sample of skeletal muscle was bread-loafed in an attempt...correlation with the formation of soft tissue sarcomas . In contrast, none of these three animal’s implant sites showed evidence of a proliferative or

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

NASA Astrophysics Data System (ADS)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

Development and process evaluation of a Web-based responsible beverage service training program.

PubMed

Danaher, Brian G; Dresser, Jack; Shaw, Tracy; Severson, Herbert H; Tyler, Milagra S; Maxwell, Elisabeth D; Christiansen, Steve M

2012-09-22

Responsible beverage service (RBS) training designed to improve the appropriate service of alcohol in commercial establishments is typically delivered in workshops. Recently, Web-based RBS training programs have emerged. This report describes the formative development and subsequent design of an innovative Web-delivered RBS program, and evaluation of the impact of the program on servers' knowledge, attitudes, and self-efficacy. Formative procedures using focus groups and usability testing were used to develop a Web-based RBS training program. Professional alcohol servers (N = 112) who worked as servers and/or mangers in alcohol service settings were recruited to participate. A pre-post assessment design was used to assess changes associated with using the program. Participants who used the program showed significant improvements in their RBS knowledge, attitudes, and self-efficacy. Although the current study did not directly observe and determine impact of the intervention on server behaviors, it demonstrated that the development process incorporating input from a multidisciplinary team in conjunction with feedback from end-users resulted in creation of a Web-based RBS program that was well-received by servers and that changed relevant knowledge, attitudes, and self-efficacy. The results also help to establish a needed evidence base in support of the use of online RBS training, which has been afforded little research attention.