Molecular orbital studies of the bonding in heavy element organometallics: Progress report

NASA Astrophysics Data System (ADS)

Bursten, B. E.

1988-03-01

Over the past two years we have made considerable progress in the understanding of the bonding in heavy element mononuclear and binuclear complexes. For mononuclear complexes, our strategy has been to study the orbital interactions between the actinide metal center and the surrounding ligands. One particular system which has been studied extensively is X sub 3 AnL (where X = Cp, Cl, NH sub 2 ; An = actinide; and L = neutral or anionic ligand). We are interested not only in the mechanics of the An-X orbital interactions, but also how the relative donor characteristics of X may influence coordination of the fourth ligand L to the actinide. For binuclear systems, we are interested not only in homobimetallic complexes, but also in heterobimetallic complexes containing actinides and transition metals. In order to make the calculations of such large systems tractable, we have transferred the X-alpha-SW codes to the newly acquired Cray XMP24 at the Ohio Supercomputer Center. This has resulted in significant savings of money and time.

Characteristics of Tables for Disseminating Biobehavioral Results.

PubMed

Schneider, Barbara St Pierre; Nagelhout, Ed; Feng, Du

2018-01-01

To report the complexity and richness of study variables within biological nursing research, authors often use tables; however, the ease with which consumers understand, synthesize, evaluate, and build upon findings depends partly upon table design. To assess and compare table characteristics within research and review articles published in Biological Research for Nursing and Nursing Research. A total of 10 elements in tables from 48 biobehavioral or biological research or review articles were analyzed. To test six hypotheses, a two-level hierarchical linear model was used for each of the continuous table elements, and a two-level hierarchical generalized linear model was used for each of the categorical table elements. Additionally, the inclusion of probability values in statistical tables was examined. The mean number of tables per article was 3. Tables in research articles were more likely to contain quantitative content, while tables in review articles were more likely to contain both quantitative and qualitative content. Tables in research articles had a greater number of rows, columns, and column-heading levels than tables in review articles. More than one half of statistical tables in research articles had a separate probability column or had probability values within the table, whereas approximately one fourth had probability notes. Authors and journal editorial staff may be generating tables that better depict biobehavioral content than those identified in specific style guidelines. However, authors and journal editorial staff may want to consider table design in terms of audience, including alternative visual displays.

Summary of the Fourth AIAA CFD Drag Prediction Workshop

NASA Technical Reports Server (NTRS)

Vassberg, John C.; Tinoco, Edward N.; Mani, Mori; Rider, Ben; Zickuhr, Tom; Levy, David W.; Brodersen, Olaf P.; Eisfeld, Bernhard; Crippa, Simone; Wahls, Richard A.;

``Dressing'' lines and vertices in calculations of matrix elements with the coupled-cluster method and determination of Cs atomic properties

NASA Astrophysics Data System (ADS)

Derevianko, Andrei; Porsev, Sergey G.

2005-03-01

We consider evaluation of matrix elements with the coupled-cluster method. Such calculations formally involve infinite number of terms and we devise a method of partial summation (dressing) of the resulting series. Our formalism is built upon an expansion of the product C†C of cluster amplitudes C into a sum of n -body insertions. We consider two types of insertions: particle (hole) line insertion and two-particle (two-hole) random-phase-approximation-like insertion. We demonstrate how to “dress” these insertions and formulate iterative equations. We illustrate the dressing equations in the case when the cluster operator is truncated at single and double excitations. Using univalent systems as an example, we upgrade coupled-cluster diagrams for matrix elements with the dressed insertions and highlight a relation to pertinent fourth-order diagrams. We illustrate our formalism with relativistic calculations of the hyperfine constant A(6s) and the 6s1/2-6p1/2 electric-dipole transition amplitude for the Cs atom. Finally, we augment the truncated coupled-cluster calculations with otherwise omitted fourth order diagrams. The resulting analysis for Cs is complete through the fourth order of many-body perturbation theory and reveals an important role of triple and disconnected quadruple excitations.

Bilateral Versus Unilateral Cochlear Implants in Children: A Study of Spoken Language Outcomes

PubMed Central

Harris, David; Bennet, Lisa; Bant, Sharyn

2014-01-01

Objectives: Although it has been established that bilateral cochlear implants (CIs) offer additional speech perception and localization benefits to many children with severe to profound hearing loss, whether these improved perceptual abilities facilitate significantly better language development has not yet been clearly established. The aims of this study were to compare language abilities of children having unilateral and bilateral CIs to quantify the rate of any improvement in language attributable to bilateral CIs and to document other predictors of language development in children with CIs. Design: The receptive vocabulary and language development of 91 children was assessed when they were aged either 5 or 8 years old by using the Peabody Picture Vocabulary Test (fourth edition), and either the Preschool Language Scales (fourth edition) or the Clinical Evaluation of Language Fundamentals (fourth edition), respectively. Cognitive ability, parent involvement in children’s intervention or education programs, and family reading habits were also evaluated. Language outcomes were examined by using linear regression analyses. The influence of elements of parenting style, child characteristics, and family background as predictors of outcomes were examined. Results: Children using bilateral CIs achieved significantly better vocabulary outcomes and significantly higher scores on the Core and Expressive Language subscales of the Clinical Evaluation of Language Fundamentals (fourth edition) than did comparable children with unilateral CIs. Scores on the Preschool Language Scales (fourth edition) did not differ significantly between children with unilateral and bilateral CIs. Bilateral CI use was found to predict significantly faster rates of vocabulary and language development than unilateral CI use; the magnitude of this effect was moderated by child age at activation of the bilateral CI. In terms of parenting style, high levels of parental involvement, low amounts of screen time, and more time spent by adults reading to children facilitated significantly better vocabulary and language outcomes. In terms of child characteristics, higher cognitive ability and female sex were predictive of significantly better language outcomes. When family background factors were examined, having tertiary-educated primary caregivers and a family history of hearing loss were significantly predictive of better outcomes. Birth order was also found to have a significant negative effect on both vocabulary and language outcomes, with each older sibling predicting a 5 to 10% decrease in scores. Conclusions: Children with bilateral CIs achieved significantly better vocabulary outcomes, and 8-year-old children with bilateral CIs had significantly better language outcomes than did children with unilateral CIs. These improvements were moderated by children’s ages at both first and second CIs. The outcomes were also significantly predicted by a number of factors related to parenting, child characteristics, and family background. Fifty-one percent of the variance in vocabulary outcomes and between 59 to 69% of the variance in language outcomes was predicted by the regression models. PMID:24557003

On 3-D inelastic analysis methods for hot section components. Volume 1: Special finite element models

NASA Technical Reports Server (NTRS)

Nakazawa, S.

1988-01-01

This annual status report presents the results of work performed during the fourth year of the 3-D Inelastic Analysis Methods for Hot Section Components program (NASA Contract NAS3-23697). The objective of the program is to produce a series of new computer codes permitting more accurate and efficient 3-D analysis of selected hot section components, i.e., combustor liners, turbine blades and turbine vanes. The computer codes embody a progression of math models and are streamlined to take advantage of geometrical features, loading conditions, and forms of material response that distinguish each group of selected components. Volume 1 of this report discusses the special finite element models developed during the fourth year of the contract.

American Military History and its Insights into Fourth Generation Warfare

DTIC Science & Technology

2006-01-01

8William S . Lind, Colonel Keith Nightengale (USA), Captain John F. Schmitt (USMC), Colonel Joseph W. Sutton (USA), and Lieutenant Colonel Gary I. Wilson...Lind, William S ., Colonel Keith Nightengale (USA), Captain John F. Schmitt (USMC), Colonel Joseph W. Sutton (USA), and Lieutenant Colonel Gary I...military history and its insights into fourth generation warfare. 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S

Situational Interest of Fourth-Grade Children in Music at School

ERIC Educational Resources Information Center

Roberts, J. Christopher

2015-01-01

The purpose of this study was to identify the characteristics of common elementary music class activities that elicit situational interest, the short-term interest that emerges spontaneously in learners when faced with environmental factors in an educational experience. An instrumental case study approach was employed, with 24 fourth-grade…

Our Community -- Today and Yesterday. Book One (Nihil Hahoodzodoo -- Diijiidi doo Adaadaa. Naaltsoos T'aala'i Gone Yits'iligii). Fourth Grade Navajo Bilingual-Bicultural Social Studies Curriculum.

ERIC Educational Resources Information Center

Bia, Fred; And Others

Presented in five chapters, book 1 of the Rough Rock fourth grade Navajo social studies program text is written in Navajo and English. The first chapter is on the community of Rough Rock (Arizona) illustrated by photographs of the community and people. Chapter II discusses the four elements (air, water, earth, and fire) the community needs to…

20 CFR 655.1114 - Element IV-What are the timely and significant steps an H-1C employer must take to recruit and...

Code of Federal Regulations, 2010 CFR

2010-04-01

... significant steps an H-1C employer must take to recruit and retain U.S. nurses? 655.1114 Section 655.1114... Workers as Registered Nurses? § 655.1114 Element IV—What are the timely and significant steps an H-1C employer must take to recruit and retain U.S. nurses? (a) The fourth attestation element requires that the...

Documentary Elements in Early Films.

ERIC Educational Resources Information Center

Sanderson, Richard A.

Focusing on documentary elements, this study examines the film content and film techniques of 681 motion pictures produced in the United States prior to 1904. Analysis of films by type, subject matter, and trends in subject matter shows that one-third of the early films are documentary in type and three-fourths of the films use subject matter of a…

Study on Treatment with Respect to Idiopathic Scoliosis

NASA Astrophysics Data System (ADS)

Takeuchi, Kenzen; Azegami, Hideyuki; Murachi, Shunji; Kitoh, Junzoh; Ishida, Yoshito; Kawakami, Noriaki; Makino, Mitsunori

A hypothesis that the thoracic idiopathic scoliosis is buckling phenomenon of the fourth mode induced by the growth of thoracic vertebral bodies was presented in the previous work by the authors using numerical simulations with finite element model of the spine. If the hypothesis is acceptable, sensitivity function with respect to the critical growth of thoracic vertebrae on the maximization problem of buckling load with the fourth buckling mode gives us useful information to improve and develop treatments for the idiopathic scoliosis. The numerical results analyzed by the finite element method demonstrated that the sensitivity function is high at the articular capsules of the intervertebral joints, the intervertebral disks, the costotransverse joints and the constovertebral joints around the apex of the curvature in the case of the thoracic idiopathic scoliosis.

Missing Voices: Fourth through Eighth Grade Urban Students' Perceptions of Bullying

ERIC Educational Resources Information Center

Varjas, Kris; Meyers, Joel; Bellmoff, Lynnae; Lopp, Eugene; Birckbichler, Lamar; Marshall, Megan

2008-01-01

This qualitative study aims to investigate urban students' perceptions of bullying. Thirty participants were recruited from the fourth through eighth grade in an urban school system. Five primary themes emerged representing these youths' perceptions of: (a) the nature of the bullying; (b) the characteristics of victims and bullies; (c) the…

Advancing Fourth-Grade Students' Understanding of Arithmetic Properties with Instruction That Promotes Mathematical Argumentation

ERIC Educational Resources Information Center

Rumsey, Chepina Witkowski

2012-01-01

The goals for this study were to investigate how fourth-grade students developed an understanding of the arithmetic properties when instruction promoted mathematical argumentation and to identify the characteristics of students' arguments. Using the emergent perspective as an overarching theoretical perspective helped distinguish between two…

Acetylenic carbon allotrope

DOEpatents

Lagow, Richard J.

1998-01-01

A fourth allotrope of carbon, an acetylenic carbon allotrope, is described. The acetylenic carbon allotropes of the present invention are more soluble than the other known carbon allotropes in many common organic solvents and possesses other desirable characteristics, e.g. high electron density, ability to burn cleanly, and electrical conductive properties. Many uses for this fourth allotrope are described herein.

Acetylenic carbon allotrope

DOEpatents

Lagow, Richard J.

1999-01-01

A fourth allotrope of carbon, an acetylenic carbon allotrope, is described. The acetylenic carbon allotropes of the present invention are more soluble than the other known carbon allotropes in many common organic solvents and possesses other desirable characteristics, e.g. high electron density, ability to burn cleanly, and electrical conductive properties. Many uses for this fourth allotrope are described herein.

Investigating cerebral oedema using poroelasticity.

PubMed

Vardakis, John C; Chou, Dean; Tully, Brett J; Hung, Chang C; Lee, Tsong H; Tsui, Po-Hsiang; Ventikos, Yiannis

2016-01-01

Cerebral oedema can be classified as the tangible swelling produced by expansion of the interstitial fluid volume. Hydrocephalus can be succinctly described as the abnormal accumulation of cerebrospinal fluid (CSF) within the brain which ultimately leads to oedema within specific sites of parenchymal tissue. Using hydrocephalus as a test bed, one is able to account for the necessary mechanisms involved in the interaction between oedema formation and cerebral fluid production, transport and drainage. The current state of knowledge about integrative cerebral dynamics and transport phenomena indicates that poroelastic theory may provide a suitable framework to better understand various diseases. In this work, Multiple-Network Poroelastic Theory (MPET) is used to develop a novel spatio-temporal model of fluid regulation and tissue displacement within the various scales of the cerebral environment. The model is applied through two formats, a one-dimensional finite difference - Computational Fluid Dynamics (CFD) coupling framework, as well as a two-dimensional Finite Element Method (FEM) formulation. These are used to investigate the role of endoscopic fourth ventriculostomy in alleviating oedema formation due to fourth ventricle outlet obstruction (1D coupled model) in addition to observing the capability of the FEM template in capturing important characteristics allied to oedema formation, like for instance in the periventricular region (2D model). Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Using Works of Art to Give a Voice to Culturally Diverse Students: Q-Methodology Study

ERIC Educational Resources Information Center

Beck, Paula D.

2017-01-01

The current study by Beck (2014) investigated whether any relationship exists between a cross-section of 48 fourth-grade elementary-school students and their artistic judgments regarding the seven elements of art: color, form, line, shape, space, texture, and value. Each of these elements of art affects our senses and might offer a better…

Rib fractures under anterior-posterior dynamic loads: experimental and finite-element study.

PubMed

Li, Zuoping; Kindig, Matthew W; Kerrigan, Jason R; Untaroiu, Costin D; Subit, Damien; Crandall, Jeff R; Kent, Richard W

2010-01-19

The purpose of this study was to investigate whether using a finite-element (FE) mesh composed entirely of hexahedral elements to model cortical and trabecular bone (all-hex model) would provide more accurate simulations than those with variable thickness shell elements for cortical bone and hexahedral elements for trabecular bone (hex-shell model) in the modeling human ribs. First, quasi-static non-injurious and dynamic injurious experiments were performed using the second, fourth, and tenth human thoracic ribs to record the structural behavior and fracture tolerance of individual ribs under anterior-posterior bending loads. Then, all-hex and hex-shell FE models for the three ribs were developed using an octree-based and multi-block hex meshing approach, respectively. Material properties of cortical bone were optimized using dynamic experimental data and the hex-shell model of the fourth rib and trabecular bone properties were taken from the literature. Overall, the reaction force-displacement relationship predicted by both all-hex and hex-shell models with nodes in the offset middle-cortical surfaces compared well with those measured experimentally for all the three ribs. With the exception of fracture locations, the predictions from all-hex and offset hex-shell models of the second and fourth ribs agreed better with experimental data than those from the tenth rib models in terms of reaction force at fracture (difference <15.4%), ultimate failure displacement and time (difference <7.3%), and cortical bone strains. The hex-shell models with shell nodes in outer cortical surfaces increased static reaction forces up to 16.6%, compared to offset hex-shell models. These results indicated that both all-hex and hex-shell modeling strategies were applicable for simulating rib responses and bone fractures for the loading conditions considered, but coarse hex-shell models with constant or variable shell thickness were more computationally efficient and therefore preferred. Copyright 2009 Elsevier Ltd. All rights reserved.

Fact Sheets about the Fourth Unregulated Contaminant Monitoring Rule (UCMR 4)

EPA Pesticide Factsheets

Fact Sheets explaining the program, contaminants for monitoring, water systems applicable, timeframe & monitoring frequency, monitoring locations, critical requirements, data elements and where to find additional information on monitoring data.

Acetylenic carbon allotrope

DOEpatents

Lagow, R.J.

1998-02-10

A fourth allotrope of carbon, an acetylenic carbon allotrope, is described. The acetylenic carbon allotropes of the present invention are more soluble than the other known carbon allotropes in many common organic solvents and possesses other desirable characteristics, e.g. high electron density, ability to burn cleanly, and electrical conductive properties. Many uses for this fourth allotrope are described herein. 17 figs.

A structural mechanics approach for the phonon dispersion analysis of graphene

NASA Astrophysics Data System (ADS)

Hou, X. H.; Deng, Z. C.; Zhang, K.

2017-04-01

A molecular structural mechanics model for the numerical simulation of phonon dispersion relations of graphene is developed by relating the C-C bond molecular potential energy to the strain energy of the equivalent beam-truss space frame. With the stiffness matrix known and further based on the periodic structure characteristics, the Bloch theorem is introduced to develop the dispersion relation of graphene sheet. Being different from the existing structural mechanics model, interactions between the fourth-nearest neighbor atoms are further simulated with beam elements to compensate the reduced stretching stiffness, where as a result not only the dispersion relations in the low frequency field are accurately achieved, but results in the high frequency field are also reasonably obtained. This work is expected to provide new opportunities for the dynamic properties analysis of graphene and future application in the engineering sector.

Ion detection device and method with compressing ion-beam shutter

DOEpatents

Sperline, Roger P [Tucson, AZ

2009-05-26

An ion detection device, method and computer readable medium storing instructions for applying voltages to shutter elements of the detection device to compress ions in a volume defined by the shutter elements and to output the compressed ions to a collector. The ion detection device has a chamber having an inlet and receives ions through the inlet, a shutter provided in the chamber opposite the inlet and configured to allow or prevent the ions to pass the shutter, the shutter having first and second shutter elements, a collector provided in the chamber opposite the shutter and configured to collect ions passed through the shutter, and a processing unit electrically connected to the first and second shutter elements. The processing unit applies, during a first predetermined time interval, a first voltage to the first shutter element and a second voltage to the second shutter element, the second voltage being lower than the first voltage such that ions from the inlet enter a volume defined by the first and second shutter elements, and during a second predetermined time interval, a third voltage to the first shutter element, higher than the first voltage, and a fourth voltage to the second shutter element, the third voltage being higher than the fourth voltage such that ions that entered the volume are compressed as the ions exit the volume and new ions coming from the inlet are prevented from entering the volume. The processing unit is electrically connected to the collector and configured to detect the compressed ions based at least on a current received from the collector and produced by the ions collected by the collector.

The Effect of Teacher and Student Characteristics on TIMSS 2011 Mathematics Achievement of Fourth- and Eighth-Grade Students in Turkey

ERIC Educational Resources Information Center

Yalcin, Seher; Demirtasli, Rahime Nükhet; Dibek, Munevver Ilgun; Yavuz, Hatice Cigdem

2017-01-01

This study investigated effect of student- and school-level variables on mathematics achievement of fourth- and eighth-grade students using the Trends in International Mathematics and Science Study (TIMSS) 2011 data of Turkey. The common variables addressed in student and school questionnaires were compared. Due to nested structure of the TIMSS…

View of building 11180 looking southeast, showing wide eaves, eave ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 11180 looking southeast, showing wide eaves, eave brackets, and flared elements at sill line. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Office Building, Fourth Street, China Lake, Kern County, CA

Use of individualized learning plans among fourth-year sub-interns in pediatrics and internal medicine.

PubMed

Shepard, Michelle E; Sastre, Elizabeth A; Davidson, Mario A; Fleming, Amy E

2012-01-01

Individualized Learning Plans (ILPs) are an effective tool for promoting self-directed learning among residents. However, no literature details ILP use among medical students. Fifty fourth-year sub-interns in pediatrics and internal medicine created ILPs, including a self-assessment of strengths and weaknesses based on ACGME core competencies and the setting of learning objectives. During weekly follow-up meetings with faculty mentors and peers, students discussed challenges and revised goals. Upon completion of the rotation, students completed a survey of Likert-scale questions addressing satisfaction with and perceived utility of ILP components. Students most often self-identified strengths in the areas of Professionalism and Interpersonal and Communication Skills and weaknesses in Patient Care and Systems-Based Practice. Eighty-two percent set at least one learning objective in an identified area of weakness. Students expressed high confidence in their abilities to create achievable learning objectives and to generate strategies to meet those objectives. Students agreed that discussions during group meetings were meaningful, and they identified the setting learning objectives and weekly meetings as the most important elements of the exercise. Fourth-year sub-interns reported that ILPs helped them to accomplish rotation goals, with the setting of learning objectives and weekly discussions being the most useful elements.

Transformations of visual memory induced by implied motions of pattern elements.

PubMed

Finke, R A; Freyd, J J

1985-10-01

Four experiments measured distortions in short-term visual memory induced by displays depicting independent translations of the elements of a pattern. In each experiment, observers saw a sequence of 4 dot patterns and were instructed to remember the third pattern and to compare it with the fourth. The first three patterns depicted translations of the dots in consistent, but separate directions. Error rates and reaction times for rejecting the fourth pattern as different from the third were substantially higher when the dots in that pattern were displaced slightly forward, in the same directions as the implied motions, compared with when the dots were displaced in the opposite, backward directions. These effects showed little variation across interstimulus intervals ranging from 250 to 2,000 ms, and did not depend on whether the displays gave rise to visual apparent motion. However, they were eliminated when the dots in the fourth pattern were displaced by larger amounts in each direction, corresponding to the dot positions in the next and previous patterns in the same inducing sequence. These findings extend our initial report of the phenomenon of "representational momentum" (Freyd & Finke, 1984a), and help to rule out alternatives to the proposal that visual memories tend to undergo, at least to some extent, the transformations implied by a prior sequence of observed events.

Decay spectroscopy of element 115 daughters: Rg 280 → Mt 276 and Mt 276 → Bh 272

DOE PAGES

Gates, J. M.; Gregorich, K. E.; Gothe, O. R.; ...

2015-08-03

In this study, forty-six decay chains, assigned to the decay of 288115, were produced using the 243Am ( 48Ca, 3n) 288115 reaction at the Lawrence Berkeley National Laboratory 88-in. cyclotron. The resulting series of α decays were studied using α-photon and α-x-ray spectroscopies. Multiple α-photon coincidences were observed in the element 115 decay chain members, particularly in the third- and fourth-generation decays (presumed to be 280Rg and 276Mt, respectively). Upon combining these data with those from 22 288115 decay chains observed in a similar experiment, updated level schemes in 276Mt and 272Bh (populated by the α decay of 280Rg andmore » 276Mt, respectively) are proposed. Additionally, photons were observed in the energy range expected for K x rays coincident with the α decay of both 280Rg and 276Mt. However, Compton scattering of higher-energy γ rays and discrete transitions are present in the K x-ray region preventing a definitive Z identification to be made based on observation of characteristic K x-ray energies.« less

The Effects of Acculturation on Healthy Lifestyle Characteristics among Hispanic Fourth-Grade Children in Texas Public Schools, 2004-2005

ERIC Educational Resources Information Center

Lind, Catherine; Mirchandani, Gita G.; Castrucci, Brian C.; Chavez, Noel; Handler, Arden; Hoelscher, Deanna M.

2012-01-01

Background: Childhood obesity is a national epidemic that disproportionately affects Hispanic children. Evidence suggests that increased acculturation among this population adversely affects diet and other healthy lifestyle characteristics, leading to higher rates of overweight and obesity. Healthy lifestyle characteristics must be understood in…

Electroencephalography in ellipsoidal geometry with fourth-order harmonics.

PubMed

Alcocer-Sosa, M; Gutierrez, D

2016-08-01

We present a solution to the electroencephalographs (EEG) forward problem of computing the scalp electric potentials for the case when the head's geometry is modeled using a four-shell ellipsoidal geometry and the brain sources with an equivalent current dipole (ECD). The proposed solution includes terms up to the fourth-order ellipsoidal harmonics and we compare this new approximation against those that only considered up to second- and third-order harmonics. Our comparisons use as reference a solution in which a tessellated volume approximates the head and the forward problem is solved through the boundary element method (BEM). We also assess the solution to the inverse problem of estimating the magnitude of an ECD through different harmonic approximations. Our results show that the fourth-order solution provides a better estimate of the ECD in comparison to lesser order ones.

[Disproportionately large communicating fourth ventricle--report of 2 cases].

PubMed

Matsumoto, M; Kushida, Y; Shibata, I; Seiki, Y; Terao, H

1983-11-01

A term of 'disproportionately large, communicating fourth ventricle' (DLCFV) was first proposed by in Harwood-Nash in 1980. It is somewhat different from the well known clinical entity of 'isolated or trapped fourth ventricle', because of apparent patency of aqueductal canal. Two cases of typical DLCFV encountered in our clinic were described. First patient was a 24 year old man in whom this condition developed following operations for lumber disc and second patient was 22 year old woman in whom the disease developed after subarachnoid hemorrhage. In both cases, main symptoms were attributable to hydrocephalus but three posterior fossa symptoms, nystagmus, Parinaud' sign and truncal ataxia were also characteristic. On the CT scan, the fourth ventricle was extraordinarily enlarged. Patency of the aqueductal canal was demonstrated by air study or Conray and Metrizamide ventriculography. On the other hand, occlusion was demonstrated or highly suspected in or near the foramina Magendie and Luschka. After a routine ventriculo-peritoneal shunt operation, the fourth ventricle decreased in size and the symptoms were immediately relieved. Plausible explanation for mechanism involved in occurrence of DLCFV were (1) occlusion process in or near the fourth ventricle outlets seems to be crucial in this pathologic condition. Collision of CSF pulse waves against the obstruction may yield a water hammer effect on the fourth ventricle. (2) abnormal weakness of the brain stem parenchyma around the fourth ventricle to CSF pressure may be another contributory factor.

Seeing the Forest for the Trees: Prevalence of Low Scores on the Wechsler Intelligence Scale for Children, Fourth Edition (WISC-IV)

ERIC Educational Resources Information Center

Brooks, Brian L.

2010-01-01

Low scores across a battery of tests are common in healthy people and vary by demographic characteristics. The purpose of the present article was to present the base rates of low scores for the Wechsler Intelligence Scale for Children, fourth edition (WISC-IV; D. Wechsler, 2003). Participants included 2,200 children and adolescents between 6 and…

An Introduction to Educational Holography.

ERIC Educational Resources Information Center

Lloyd, R. Scott

Holograms are capable of taking the two-dimensional ways of envisioning information to another dimension of presentation, representation, and conceptualization. Educational holography is joining display holography, holographic testing of materials, and holographic optical elements as a fourth major field in holography. Holograms are explored as…

Fourth-order convergence of a compact scheme for the one-dimensional biharmonic equation

NASA Astrophysics Data System (ADS)

Fishelov, D.; Ben-Artzi, M.; Croisille, J.-P.

2012-09-01

The convergence of a fourth-order compact scheme to the one-dimensional biharmonic problem is established in the case of general Dirichlet boundary conditions. The compact scheme invokes value of the unknown function as well as Pade approximations of its first-order derivative. Using the Pade approximation allows us to approximate the first-order derivative within fourth-order accuracy. However, although the truncation error of the discrete biharmonic scheme is of fourth-order at interior point, the truncation error drops to first-order at near-boundary points. Nonetheless, we prove that the scheme retains its fourth-order (optimal) accuracy. This is done by a careful inspection of the matrix elements of the discrete biharmonic operator. A number of numerical examples corroborate this effect. We also present a study of the eigenvalue problem uxxxx = νu. We compute and display the eigenvalues and the eigenfunctions related to the continuous and the discrete problems. By the positivity of the eigenvalues, one can deduce the stability of of the related time-dependent problem ut = -uxxxx. In addition, we study the eigenvalue problem uxxxx = νuxx. This is related to the stability of the linear time-dependent equation uxxt = νuxxxx. Its continuous and discrete eigenvalues and eigenfunction (or eigenvectors) are computed and displayed graphically.

Congenital cutaneous fistula at the sternoclavicular joint - Not a dermoid fistula but the remnant of the fourth branchial (pharyngeal) cleft ?

PubMed

Ohno, Michinobu; Kanamori, Yutaka; Tomonaga, Kotaro; Yamashita, Tatsuya; Migita, Misato; Takezoe, Toshiko; Watanabe, Toshihiko; Fuchimoto, Yasushi; Matsuoka, Kentaro

2015-12-01

A fourth branchial pouch remnant is well known as a pyriform sinus fistula. However, there has been no report of a fistula composed of the complete remnant of the fourth branchial apparatus. We experienced patients with a congenital lower neck cutaneous fistula which was thought to be the skin-side remnant of the fourth branchial cleft. Seven children were referred to our hospital from 2009 to 2015 for the treatment of a cutaneous fistula situated near the sternoclavicular joint. All of them were surgically resected and their pathological characteristics were examined. Clinical charts were retrospectively reviewed. In six cases, the left side was affected. All cutaneous fistulas had a small skin orifice near the sternoclavicular joint and they were situated at the anterior edge of the sternocleidomastoid muscle. Abscess formation was seen in four cases. Surgical resection was performed at the age of 6 months to 9 years. These fistulas ran deep into the subcutaneous tissue and had a blind end. Pathological examination showed that the epithelial layer was mainly composed of a stratified squamous epithelium. In two cases the epithelium was composed of ciliated columnar epithelium. Recurrence has not been observed in any of the cases. The seven cases had a common clinical feature and were a definite clinical entity. Judging from the characteristics of our cases and the previous literature, we concluded that this lower neck cutaneous fistula was most likely a congenital skin-side remnant of the fourth branchial cleft. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Child Characteristics, Parent Education and Depressive Symptoms, and Marital Conflict Predicting Trajectories of Parenting Behavior from Childhood Through Early Adolescence in Taiwan.

PubMed

Hsieh, Yi-Ping; Dopkins Stright, Anne; Yen, Lee-Lan

2017-09-01

The study examined how child and parent characteristics, and contextual sources of stress, such as marital conflict predict initial status and trajectories of parent involvement, support, and harsh control, over a 4-year period in families in Taiwan (n = 4,754). Based on Belsky's (1984) ecological model of parenting, three domains predicting parenting were tested, child characteristics (age cohort and gender), father and mother characteristics (education and depressive symptoms), and contextual sources of stress (marital conflict). The study followed two cohorts of children; the younger cohort was followed from first to fourth grade and the older cohort from fourth to seventh grade. Initially, fourth graders reported more parental involvement, support, and harsh control than first graders. However, involvement, support, and harsh control decreased across the 4 years for the older cohort as they transitioned to early adolescence. In the first year, girls reported more parental involvement and support and less harsh control than boys. Across the 4 years, involvement and support increased, and harsh control decreased for boys; whereas involvement stayed the same, support slightly decreased, and harsh control slightly increased for girls. Children whose parents were more educated reported more parent involvement, support, and harsh control in the first year. Children whose fathers were chronically depressed and whose parents were experiencing marital conflict reported decreasing parent involvement and support over the years. © 2016 Family Process Institute.

A higher-order conservation element solution element method for solving hyperbolic differential equations on unstructured meshes

NASA Astrophysics Data System (ADS)

Bilyeu, David

This dissertation presents an extension of the Conservation Element Solution Element (CESE) method from second- to higher-order accuracy. The new method retains the favorable characteristics of the original second-order CESE scheme, including (i) the use of the space-time integral equation for conservation laws, (ii) a compact mesh stencil, (iii) the scheme will remain stable up to a CFL number of unity, (iv) a fully explicit, time-marching integration scheme, (v) true multidimensionality without using directional splitting, and (vi) the ability to handle two- and three-dimensional geometries by using unstructured meshes. This algorithm has been thoroughly tested in one, two and three spatial dimensions and has been shown to obtain the desired order of accuracy for solving both linear and non-linear hyperbolic partial differential equations. The scheme has also shown its ability to accurately resolve discontinuities in the solutions. Higher order unstructured methods such as the Discontinuous Galerkin (DG) method and the Spectral Volume (SV) methods have been developed for one-, two- and three-dimensional application. Although these schemes have seen extensive development and use, certain drawbacks of these methods have been well documented. For example, the explicit versions of these two methods have very stringent stability criteria. This stability criteria requires that the time step be reduced as the order of the solver increases, for a given simulation on a given mesh. The research presented in this dissertation builds upon the work of Chang, who developed a fourth-order CESE scheme to solve a scalar one-dimensional hyperbolic partial differential equation. The completed research has resulted in two key deliverables. The first is a detailed derivation of a high-order CESE methods on unstructured meshes for solving the conservation laws in two- and three-dimensional spaces. The second is the code implementation of these numerical methods in a computer code. For code development, a one-dimensional solver for the Euler equations was developed. This work is an extension of Chang's work on the fourth-order CESE method for solving a one-dimensional scalar convection equation. A generic formulation for the nth-order CESE method, where n ≥ 4, was derived. Indeed, numerical implementation of the scheme confirmed that the order of convergence was consistent with the order of the scheme. For the two- and three-dimensional solvers, SOLVCON was used as the basic framework for code implementation. A new solver kernel for the fourth-order CESE method has been developed and integrated into the framework provided by SOLVCON. The main part of SOLVCON, which deals with unstructured meshes and parallel computing, remains intact. The SOLVCON code for data transmission between computer nodes for High Performance Computing (HPC). To validate and verify the newly developed high-order CESE algorithms, several one-, two- and three-dimensional simulations where conducted. For the arbitrary order, one-dimensional, CESE solver, three sets of governing equations were selected for simulation: (i) the linear convection equation, (ii) the linear acoustic equations, (iii) the nonlinear Euler equations. All three systems of equations were used to verify the order of convergence through mesh refinement. In addition the Euler equations were used to solve the Shu-Osher and Blastwave problems. These two simulations demonstrated that the new high-order CESE methods can accurately resolve discontinuities in the flow field.For the two-dimensional, fourth-order CESE solver, the Euler equation was employed in four different test cases. The first case was used to verify the order of convergence through mesh refinement. The next three cases demonstrated the ability of the new solver to accurately resolve discontinuities in the flows. This was demonstrated through: (i) the interaction between acoustic waves and an entropy pulse, (ii) supersonic flow over a circular blunt body, (iii) supersonic flow over a guttered wedge. To validate and verify the three-dimensional, fourth-order CESE solver, two different simulations where selected. The first used the linear convection equations to demonstrate fourth-order convergence. The second used the Euler equations to simulate supersonic flow over a spherical body to demonstrate the scheme's ability to accurately resolve shocks. All test cases used are well known benchmark problems and as such, there are multiple sources available to validate the numerical results. Furthermore, the simulations showed that the high-order CESE solver was stable at a CFL number near unity.

Joint Development of a Fourth Generation Single Crystal Superalloy

NASA Technical Reports Server (NTRS)

Walston, S.; Cetel, A.; MacKay, R.; OHara, K.; Duhl, D.; Dreshfield, R.

2004-01-01

A new, fourth generation, single crystal superalloy has been jointly developed by GE Aircraft Engines, Pratt & Whitney, and NASA. The focus of the effort was to develop a turbine airfoil alloy with long-term durability for use in the High Speed Civil Transport. In order to achieve adequate long-time strength improvements at moderate temperatures and retain good microstructural stability, it was necessary to make significant composition changes from 2nd and 3rd generation single crystal superalloys. These included lower chromium levels, higher cobalt and rhenium levels and the inclusion of a new alloying element, ruthenium. It was found that higher Co levels were beneficial to reducing both TCP precipitation and SRZ formation. Ruthenium caused the refractory elements to partition more strongly to the ' phase, which resulted in better overall alloy stability. The final alloy, EPM 102, had significant creep rupture and fatigue improvements over the baseline production alloys and had acceptable microstructural stability. The alloy is currently being engine tested and evaluated for advanced engine applications.

Application of unsteady aeroelastic analysis techniques on the national aerospace plane

NASA Technical Reports Server (NTRS)

Pototzky, Anthony S.; Spain, Charles V.; Soistmann, David L.; Noll, Thomas E.

1988-01-01

A presentation provided at the Fourth National Aerospace Plane Technology Symposium held in Monterey, California, in February 1988 is discussed. The objective is to provide current results of ongoing investigations to develop a methodology for predicting the aerothermoelastic characteristics of NASP-type (hypersonic) flight vehicles. Several existing subsonic and supersonic unsteady aerodynamic codes applicable to the hypersonic class of flight vehicles that are generally available to the aerospace industry are described. These codes were evaluated by comparing calculated results with measured wind-tunnel aeroelastic data. The agreement was quite good in the subsonic speed range but showed mixed agreement in the supersonic range. In addition, a future endeavor to extend the aeroelastic analysis capability to hypersonic speeds is outlined. An investigation to identify the critical parameters affecting the aeroelastic characteristics of a hypersonic vehicle, to define and understand the various flutter mechanisms, and to develop trends for the important parameters using a simplified finite element model of the vehicle is summarized. This study showed the value of performing inexpensive and timely aeroelastic wind-tunnel tests to expand the experimental data base required for code validation using simple to complex models that are representative of the NASP configurations and root boundary conditions are discussed.

High Order Discontinuous Gelerkin Methods for Convection Dominated Problems with Application to Aeroacoustics

NASA Technical Reports Server (NTRS)

Shu, Chi-Wang

2000-01-01

This project is about the investigation of the development of the discontinuous Galerkin finite element methods, for general geometry and triangulations, for solving convection dominated problems, with applications to aeroacoustics. On the analysis side, we have studied the efficient and stable discontinuous Galerkin framework for small second derivative terms, for example in Navier-Stokes equations, and also for related equations such as the Hamilton-Jacobi equations. This is a truly local discontinuous formulation where derivatives are considered as new variables. On the applied side, we have implemented and tested the efficiency of different approaches numerically. Related issues in high order ENO and WENO finite difference methods and spectral methods have also been investigated. Jointly with Hu, we have presented a discontinuous Galerkin finite element method for solving the nonlinear Hamilton-Jacobi equations. This method is based on the RungeKutta discontinuous Galerkin finite element method for solving conservation laws. The method has the flexibility of treating complicated geometry by using arbitrary triangulation, can achieve high order accuracy with a local, compact stencil, and are suited for efficient parallel implementation. One and two dimensional numerical examples are given to illustrate the capability of the method. Jointly with Hu, we have constructed third and fourth order WENO schemes on two dimensional unstructured meshes (triangles) in the finite volume formulation. The third order schemes are based on a combination of linear polynomials with nonlinear weights, and the fourth order schemes are based on combination of quadratic polynomials with nonlinear weights. We have addressed several difficult issues associated with high order WENO schemes on unstructured mesh, including the choice of linear and nonlinear weights, what to do with negative weights, etc. Numerical examples are shown to demonstrate the accuracies and robustness of the methods for shock calculations. Jointly with P. Montarnal, we have used a recently developed energy relaxation theory by Coquel and Perthame and high order weighted essentially non-oscillatory (WENO) schemes to simulate the Euler equations of real gas. The main idea is an energy decomposition under the form epsilon = epsilon(sub 1) + epsilon(sub 2), where epsilon(sub 1) is associated with a simpler pressure law (gamma)-law in this paper) and the nonlinear deviation epsilon(sub 2) is convected with the flow. A relaxation process is performed for each time step to ensure that the original pressure law is satisfied. The necessary characteristic decomposition for the high order WENO schemes is performed on the characteristic fields based on the epsilon(sub l) gamma-law. The algorithm only calls for the original pressure law once per grid point per time step, without the need to compute its derivatives or any Riemann solvers. Both one and two dimensional numerical examples are shown to illustrate the effectiveness of this approach.

[Clinical characteristics and surgical management in patients with third and fourth branchial anomalies].

PubMed

Li, Y X; He, X G; Wang, Y; Yang, X

2016-08-05

Objective: To analysize the clinical characteristics as well as the effect and methods of the surgical treatment in patiets with the third and fourth branchial anomalies. Method: The clinical data of 25 patients diagnosed as third and fourth branchial cleft fistula by pathological method were analyzed retrospectively.Two of 25 patients had undergone fistulectomy simply.Based on the embryologicc and anatomic features of branchial anomalies,23 of 25 patients had received different types of selective neck dissection.All of lesions were confirmed as branchial cleft fistula by pathology.All patients were received the examinations of Esophagus myelography,MRI and CT preoperatively. Result: The features of the third and the fourth bianchial fistula were as following:most patients suffered from recurrent neck abscess and had undergone incision and drainage. Esophagus myelography and CT were important auxiliary examination for branchial anomalies.No recurrent and complications were found in all patients by using treatment of selective neck dissection (23/25 cases) and fistulectomy simply(2/25 cases) within 12 to 36 months following-up,postoperatively. Conclusion: Branchial anomalies is characterized by recurrent acute abscess,acute thyroiditis or fistula secretion inferior to neck.Complete removal of branchial lesions and inflammatory granuloma using selective neck dissection is a safty and effective treatment for recurrent branchial anomalies. Copyright© by the Editorial Department of Journal of Clinical Otorhinolaryngology Head and Neck Surgery.

Parental Locus of Control and the Assessment of Children's Personality Characteristics.

ERIC Educational Resources Information Center

Ollendick, Duane G.

1979-01-01

A study of fourth graders and their parents was conducted to determine the relationship between parents' locus of control and their children's locus of control, anxiety, intelligence, achievement, and behavioral adjustment. The relationship between mothers' locus of control and children's characteristics was more consistent than between fathers…

Principal Effects in Illinois: A Research Brief. Policy Research: IERC 2011-3

ERIC Educational Resources Information Center

White, Bradford R.; Bowers, Alex J.

2011-01-01

This report, the fourth in an IERC series on public school principals in Illinois, summarizes recent research on the characteristics associated with principal effectiveness and examines Illinois data on the relationship between principal characteristics, student proficiency, and teacher qualifications. In order to investigate the relationships…

Acronyms, initialisms, and abbreviations: Fourth Revision

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolman, B.J.

1994-04-01

This document lists acronyms used in technical writing. The immense list is supplemented by an appendix containing chemical elements, classified information access, common abbreviations used for functions, conversion factors for selected SI units, a flowcharting template, greek alphabet, metrix terminology, proofreader`s marks, signs and symbols, and state abbreviations.

Improvements in Ross type astrometric objectives

NASA Technical Reports Server (NTRS)

Baker, J.

1971-01-01

It is shown that aspheric deformations of the first and fourth elements of the four element Ross objective can be introduced to permit one to obtain improved color corrections for astrometric purposes. The usual monochromatic aberrations are as well corrected as for the standard Ross lens. In addition, one can eliminate or reduce additional aberrations, such as secondary spectrum, chromatic spherical aberration, chromatic coma and chromatic distortion. The resulting objectives are suitable for use as intermediate and long focus astrometric objectives covering large angle fields.

The Army’s National Training Center: A Case Study in Management of a Large Defense Project

DTIC Science & Technology

1983-04-26

34Desining . . .," op cit, p. 130. IT. M3l Ior-ritc’h and C. K. Prahalad , "Managing Multi-Organization Enterprises: The Emerging Strategic Frontier...Rational Altor TModel "assumes that what must be explained is an action, i.e., behavior that reflects purpose or intention .Ŗ It assumes "that what human...a fourth element is essential to the success of large-scale commerciali- zation programs: a favorable corporate strategic environment. This element

Pack Cementation Aluminide Coatings on Superalloys: Codeposition of Cr and Reactive Elements (RE). Technical Report 1. Chromium and Reactive Element(RE)- Modified Aluminide Diffusion Coatings on Superalloys: Environmental Testing. Technical Report 2

DTIC Science & Technology

1992-11-01

Godlewska and K. Godlewski, Oxid. Met., 22 (1984) 117. 4. J.E. Restall, U.S. Patent #4,687,684 (1987). 5. P.N. Walsh, in Proceeding of the Fourth...McCarron, N.R. Lindblad, and D. Chatterji, Corrosion, 32 (1976) 476. 34 33. E. Godlewska and K. Godlewski, Oxid. Met., 22 (1984) 117. 34. B. Pieraggi

A new fourth-order Fourier-Bessel split-step method for the extended nonlinear Schroedinger equation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nash, Patrick L.

2008-01-10

Fourier split-step techniques are often used to compute soliton-like numerical solutions of the nonlinear Schroedinger equation. Here, a new fourth-order implementation of the Fourier split-step algorithm is described for problems possessing azimuthal symmetry in 3 + 1-dimensions. This implementation is based, in part, on a finite difference approximation {delta}{sub perpendicular} {sup FDA} of 1/r ({partial_derivative})/({partial_derivative}r) r({partial_derivative})/({partial_derivative}r) that possesses an associated exact unitary representation of e{sup i/2{lambda}}{sup {delta}{sub perpendicular}{sup FDA}}. The matrix elements of this unitary matrix are given by special functions known as the associated Bessel functions. Hence the attribute Fourier-Bessel for the method. The Fourier-Bessel algorithm is shown tomore » be unitary and unconditionally stable. The Fourier-Bessel algorithm is employed to simulate the propagation of a periodic series of short laser pulses through a nonlinear medium. This numerical simulation calculates waveform intensity profiles in a sequence of planes that are transverse to the general propagation direction, and labeled by the cylindrical coordinate z. These profiles exhibit a series of isolated pulses that are offset from the time origin by characteristic times, and provide evidence for a physical effect that may be loosely termed normal mode condensation. Normal mode condensation is consistent with experimentally observed pulse filamentation into a packet of short bursts, which may occur as a result of short, intense irradiation of a medium.« less

Characteristics Associated With Severe Perineal and Cervical Lacerations During Vaginal Delivery

PubMed Central

Landy, Helain J.; Laughon, S. Katherine; Bailit, Jennifer; Kominiarek, Michelle A.; Gonzalez-Quintero, Victor Hugo; Ramirez, Mildred; Haberman, Shoshana; Hibbard, Judith; Wilkins, Isabelle; Branch, D. Ware; Burkman, Ronald T.; Gregory, Kimberly; Hoffman, Matthew K.; Learman, Lee A.; Hatjis, Christos; VanVeldhuisen, Paul C.; Reddy, Uma M.; Troendle, James; Sun, Liping; Zhang, Jun

2011-01-01

Objective To characterize potentially modifiable risk factors for third- or fourth-degree perineal lacerations and cervical lacerations in a contemporary U.S. obstetric practice. Methods The Consortium on Safe Labor collected electronic medical records from 19 hospitals within 12 institutions (228,668 deliveries from 2002 to 2008). Information on patient characteristics, prenatal complications, labor and delivery data, and maternal and neonatal outcomes were collected. Only women with successful vaginal deliveries of cephalic singletons at 34 weeks of gestation or later were included; we excluded data from sites lacking information about lacerations at delivery and deliveries complicated by shoulder dystocia; 87,267 and 71,170 women were analyzed for third- or fourth-degree and cervical lacerations, respectively. Multivariable logistic regressions were used to adjust for other factors. Results Third- or fourth-degree lacerations occurred in 2,516 women (2,223 nulliparous [5.8%], 293 [0.6%] multiparous) and cervical lacerations occurred in 536 women (324 nulliparous [1.1%], 212 multiparous [0.5%]). Risks for third or fourth-degree lacerations included nulliparity (7.2-fold risk), being Asian or Pacific Islander, increasing birth weight, operative vaginal delivery, episiotomy, and longer second stage of labor. Increasing body mass index was associated with fewer lacerations. Risk factors for cervical lacerations included young maternal age, vacuum vaginal delivery, and oxytocin use among multiparous women, and cerclage regardless of parity. Conclusion Our large cohort of women with severe obstetric lacerations reflects contemporary obstetric practices. Nulliparity and episiotomy use are important risk factors for third- or fourth-degree lacerations. Cerclage increases the risk for cervical lacerations. Many identified risk factors may not be modifiable. PMID:21343766

Polyhedra and Higher Dimensions.

ERIC Educational Resources Information Center

Scott, Paul

1988-01-01

Describes the definition and characteristics of a regular polyhedron, tessellation, and pseudopolyhedra with diagrams. Discusses the nature of simplex, hypercube, and cross-polytope in the fourth dimension and beyond. (YP)

Research for Monday Morning: Elementary Writing.

ERIC Educational Resources Information Center

Perron, Jack

The first section of this paper discusses recent writing research and the basic elements of language development. The second section describes a program which used a sentence-combining method as an activity-based experience for language development. A six-month study involved all fourth graders at Powell School in Mountain View, California. The…

Guide for Training Medical Laboratory Technicians. Fourth Edition.

ERIC Educational Resources Information Center

American Medical Technologists, Park Ridge, IL.

This document is intended to assist educators in the development of medical laboratory technician training programs. The following elements are included in the document: (1) an introduction; (2) the American Medical Technologists' Code of Ethics; (3) suggested curricula for medical laboratory technician programs for a 12-month course and an…

Guide to Mentoring Boys and Young Men of Color

ERIC Educational Resources Information Center

MENTOR: National Mentoring Partnership, 2017

2017-01-01

For more than 25 years, MENTOR: The National Mentoring Partnership has provided the youth mentoring field with a set of researched-informed and practitioner-approved practices for creating and sustaining positive and impactful mentoring relationships and strong program services. The fourth edition of "The Elements of Effective Practice for…

A Garden of Learning

ERIC Educational Resources Information Center

Kirby, Tasha

2008-01-01

In order to beautify the school environment and further student learning, fourth-graders cultivated a Native Plant Learning Garden. They were responsible for designing a layout, researching garden elements, preparing the area, and planting a variety of native plants. By the completion of this inquiry-based project, students were able to clearly…

The Bermuda Triangle of Education.

ERIC Educational Resources Information Center

Bertrand, Yves

The pedagogical triangle of teacher, learner, and subject matter has in its center a fourth element: the communication system. Each feature of the pedagogical triangle, and the communication system as well, relies on a very important cultural component. Problems occur when communication processes in a classroom are fragmented and related to…

Blinded assessment of operative performance after fundamentals of laparoscopic surgery in gynecology training.

PubMed

Antosh, Danielle D; Auguste, Tamika; George, Elizabeth A; Sokol, Andrew I; Gutman, Robert E; Iglesia, Cheryl B; Desale, Sameer Y; Park, Amy J

2013-01-01

To determine the pass rate for the Fundamentals of Laparoscopic Surgery (FLS) examination among senior gynecology residents and fellows and to find whether there is an association between FLS scores and previous laparoscopic experience as well as laparoscopic intraoperative (OR) skills assessment. Prospective cohort study (Canadian Task Force classification II-2). Three gynecology residency training programs. Third- and fourth-year gynecology residents and urogynecology fellows. All participants participated in the FLS curriculum, written and manual skills examination, and completed a survey reporting baseline characteristics and opinions. Fourth-year residents and fellows underwent unblinded and blinded pre- and post-FLS OR assessments. Objective OR assessments of fourth-year residents after FLS were compared with those of fourth-year resident controls who were not FLS trained. Twenty-nine participants were included. The overall pass rate was 76%. The pass rate for third- and fourth-year residents and fellows were 62%, 85%, and 100%, respectively. A trend toward improvement in OR assessments was observed for fourth-year residents and fellows for pre-FLS curriculum compared with post-FLS testing, and FLS-trained fourth-year residents compared with fourth-year resident controls; however, this did not reach statistical significance. Self-report of laparoscopic case load experience of >20 cases was the only baseline factor significantly associated with passing the FLS examination (p = .03). The FLS pass rate for senior residents and fellows was 76%, with higher pass rates associated with increasing levels of training and laparoscopic case experience. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Social Security Disability: Demographic and Economic Characteristics of New Beneficiaries.

DTIC Science & Technology

1988-01-01

to do any work at all because of their health, they said. Almost one-fourth reported being either bedridden or wheelchair-bound. 2 FAM % rN9wrW TI...work for pay, they reported. Almost one-fourth reported being either bedridden or wheelchair-bound. Given 12 major categories of health conditions such...Total survey population 224,874 100 Unable to do work at all 193,398 86 Bedridden 29,556 13 Wheelchair-bound 22,832 10 Had a heart attack or stroke 81,026

PMP-1 Report: the Fourth Winter of PMP-1, 1981 - 1982: a Winter with Several Interesting Features

NASA Technical Reports Server (NTRS)

Labitzke, K.

1982-01-01

A synoptic description is given for the fourth winter of pre-MAP project 1 (PMP-1), 1981/82. The main characteristics of this winter are a Canadian warming in the beginning of December, a very strong minor warming in January, and an early final warming in mid-March. The eddy momentum budget, calculated from the daily height and temperature charts, is discussed in terms of the divergence of the Eliassen-Palm-vector.

An Investigation of Double Bass Vibrato Characteristics

ERIC Educational Resources Information Center

Mick, James

2015-01-01

The purpose of this study was to investigate and describe various vibrato characteristics of university double bass students. The primary objectives were: (1) to describe vibrato rate and width for commonly used fingers in first, fourth, and thumb positions; (2) to investigate whether students initiate vibrato in an upward or downward direction;…

Rolling-element bearings in China: From ancient times to the 20th century

NASA Astrophysics Data System (ADS)

Sun, Lie; Li, Ang

2016-03-01

The development of rolling-element bearings in China has spanned a long period. Based on several typical and important cases, the present article reconstructs the history of rolling-element bearings in China by dividing it into four stages according to the various characteristics of the bearings. The first stage represents the origin of rolling bearings in China, which remains controversial because of several suspected races and cages that were likely the components of bearings more than a millennium ago. At the second stage, a type of simple roller bearing was used for astronomical instruments not later than the 13th century based on clear philological and physical evidence. A similar bearing was also applied to an abridged armillary in the 17th century. Another type of spherical thrust bearings with rolling elements, which is a key component of a traditional Chinese windmill, could support a rotating shaft that moves rotationally and at an angle. At the third stage, the Chinese began studying and using the so-called Europeanstyle bearing since the 17th century. Moreover, over the last 100 years, the modern rolling bearing industry was gradually established in China, particularly because of the technology transfer from the Soviet Union in the 1950s. At the fourth stage, the Chinese government initiated the relatively rapid development of bearing technology. The government launched the "bearing movement" from the 1950s to the 1960s to establish the modern bearing industry and to promote rolling bearings as replacement for traditional sliding bearings. Furthermore, a number of large professional factories and institutions in China have continually introduced advanced technology and equipment. At present, these companies and institutions play a significant role in the international bearing industry.

Generalized Israel junction conditions for a fourth-order brane world

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balcerzak, Adam; Dabrowski, Mariusz P.

2008-01-15

We discuss a general fourth-order theory of gravity on the brane. In general, the formulation of the junction conditions (except for Euler characteristics such as Gauss-Bonnet term) leads to the higher powers of the delta function and requires regularization. We suggest the way to avoid such a problem by imposing the metric and its first derivative to be regular at the brane, while the second derivative to have a kink, the third derivative of the metric to have a step function discontinuity, and no sooner as the fourth derivative of the metric to give the delta function contribution to themore » field equations. Alternatively, we discuss the reduction of the fourth-order gravity to the second-order theory by introducing an extra tensor field. We formulate the appropriate junction conditions on the brane. We prove the equivalence of both theories. In particular, we prove the equivalence of the junction conditions with different assumptions related to the continuity of the metric along the brane.« less

A path forward in the debate over health impacts of endocrine disrupting chemicals.

PubMed

Zoeller, R Thomas; Bergman, Åke; Becher, Georg; Bjerregaard, Poul; Bornman, Riana; Brandt, Ingvar; Iguchi, Taisen; Jobling, Susan; Kidd, Karen A; Kortenkamp, Andreas; Skakkebaek, Niels E; Toppari, Jorma; Vandenberg, Laura N

2014-12-22

Several recent publications reflect debate on the issue of "endocrine disrupting chemicals" (EDCs), indicating that two seemingly mutually exclusive perspectives are being articulated separately and independently. Considering this, a group of scientists with expertise in basic science, medicine and risk assessment reviewed the various aspects of the debate to identify the most significant areas of dispute and to propose a path forward. We identified four areas of debate. The first is about the definitions for terms such as "endocrine disrupting chemical", "adverse effects", and "endocrine system". The second is focused on elements of hormone action including "potency", "endpoints", "timing", "dose" and "thresholds". The third addresses the information needed to establish sufficient evidence of harm. Finally, the fourth focuses on the need to develop and the characteristics of transparent, systematic methods to review the EDC literature. Herein we identify areas of general consensus and propose resolutions for these four areas that would allow the field to move beyond the current and, in our opinion, ineffective debate.

Relationship Involvement Among Young Adults: Are Asian American Men an Exceptional Case?

PubMed Central

Balistreri, Kelly Stamper; Joyner, Kara; Kao, Grace

2015-01-01

Asian American men and women have been largely neglected in previous studies of romantic relationship formation and status. Using data from the first and fourth waves of the National Longitudinal Study of Adolescent to Adult Health (Add Health), we examine romantic and sexual involvement among young adults, most of who were between the ages of 25 to 32 (N=11,555). Drawing from explanations that focus on structural and cultural elements as well as racial hierarchies, we examine the factors that promote and impede involvement in romantic/sexual relationships. We use logistic regression to model current involvement of men and women separately and find, with the exception of Filipino men, Asian men are significantly less likely than white men to be currently involved with a romantic partner, even after controlling for a wide array of characteristics. Our results suggest that the racial hierarchy framework best explains lower likelihood of involvement among Asian American men. PMID:26549919

Aerodynamic Characteristics at a Mach Number of 3.10 of Several Fourth-Stage Shapes of the Scout Research Vehicle

NASA Technical Reports Server (NTRS)

Jaquet, Byron M.

1961-01-01

A wind-tunnel investigation was made at a Mach number of 3.10 (Reynolds number per foot of 16.3 x 10(exp 6) to 16.9 x 10(exp 6)) to determine the aerodynamic characteristics of various modifications of the payload section of the fourth stage of the Scout research vehicle. It was found that, for the combination of stages 3 and 4, increasing the size of the nose of the basic Scout to provide a cylindrical section of the same diameter as the third stage increased the normal-force slope by about 30 percent, the axial force by about 39 percent, and moved the center of pressure forward by about one fourth-stage base diameter. By reducing the diameter of the cylinder, at about one nose length behind the base of the enlarged nose frustum, to that of the basic Scout and thereafter retaining the shape of the basic Scout, the center of pressure was moved rearward by about one-half fourth-stage base diameter at the expense of an additional 19-percent increase in axial force. A spike-hemisphere configuration had the largest forces and moments and the most forward center-of-pressure location of the configurations considered. Except for the axial force and pitching-moment slope, the experimental trends or magnitudes could not be estimated with the desired accuracy by Newtonian or-slender body theory.

Applied Research and the Transformation of College Education

ERIC Educational Resources Information Center

Doughty, Howard A.

2015-01-01

Like everything else today, there is a changing pattern in education. Some obvious elements are education's social function, demographics, and technology. A fourth dimension is being added to function, audience, and technique, and that is research. Research is also being reorganized, and now it is becoming an issue in the colleges. When, for…

Light: One Element of Learning Style.

ERIC Educational Resources Information Center

Dunn, Rita; And Others

A review of the literature indicated that some studies had investigated the effects of light on learning, but that learning style preferences for bright or low light had not been studied in relation to academic achievement. This relationship was studied with fourth-graders in a suburban school in New York State. Students took the Learning Styles…

Tone and Style: Developing a Neglected Segment of Business Communication

ERIC Educational Resources Information Center

Kenman, Leon F.

2007-01-01

The importance of tone and style to communication is attested by the longevity of the popularity of "Elements of Style," published originally in 1918, with the fourth edition published in 2000 (Strunk, 1918; Strunk & White, 2000). Communicators in business and academia at all levels need to send messages that are understood pleasantly and…

Standards for Cataloging Nonprint Materials. Fourth Edition. An Interpretation and Practical Application.

ERIC Educational Resources Information Center

Tillin, Alma M.; Quinly, William J.

Standards established by the Association for Educational Communications and Technology (AECT) set forth basic cataloging rules that apply to all types of nonprint materials. Included are all elements needed to identify, describe, and retrieve an article. Cataloging rules are applied to 18 specific media formats including audiorecording, films,…

Average bond energies between boron and elements of the fourth, fifth, sixth, and seventh groups of the periodic table

NASA Technical Reports Server (NTRS)

Altshuller, Aubrey P

1955-01-01

The average bond energies D(gm)(B-Z) for boron-containing molecules have been calculated by the Pauling geometric-mean equation. These calculated bond energies are compared with the average bond energies D(exp)(B-Z) obtained from experimental data. The higher values of D(exp)(B-Z) in comparison with D(gm)(B-Z) when Z is an element in the fifth, sixth, or seventh periodic group may be attributed to resonance stabilization or double-bond character.

Academic Self-Efficacy, Faculty-Student Interactions, and Student Characteristics as Predictors of Grade Point Average

ERIC Educational Resources Information Center

Gosnell, Joan C.

2012-01-01

The purpose of the study was to explore student characteristics, academic self-efficacy, and faculty-student interactions as predictors of grade point average for upper-division (college level third and fourth year) education students at a public 4-year degree-granting community college. The study examined the effects of student characteristics…

Automated segmentation of the lungs from high resolution CT images for quantitative study of chronic obstructive pulmonary diseases

NASA Astrophysics Data System (ADS)

Garg, Ishita; Karwoski, Ronald A.; Camp, Jon J.; Bartholmai, Brian J.; Robb, Richard A.

2005-04-01

Chronic obstructive pulmonary diseases (COPD) are debilitating conditions of the lung and are the fourth leading cause of death in the United States. Early diagnosis is critical for timely intervention and effective treatment. The ability to quantify particular imaging features of specific pathology and accurately assess progression or response to treatment with current imaging tools is relatively poor. The goal of this project was to develop automated segmentation techniques that would be clinically useful as computer assisted diagnostic tools for COPD. The lungs were segmented using an optimized segmentation threshold and the trachea was segmented using a fixed threshold characteristic of air. The segmented images were smoothed by a morphological close operation using spherical elements of different sizes. The results were compared to other segmentation approaches using an optimized threshold to segment the trachea. Comparison of the segmentation results from 10 datasets showed that the method of trachea segmentation using a fixed air threshold followed by morphological closing with spherical element of size 23x23x5 yielded the best results. Inclusion of greater number of pulmonary vessels in the lung volume is important for the development of computer assisted diagnostic tools because the physiological changes of COPD can result in quantifiable anatomic changes in pulmonary vessels. Using a fixed threshold to segment the trachea removed airways from the lungs to a better extent as compared to using an optimized threshold. Preliminary measurements gathered from patient"s CT scans suggest that segmented images can be used for accurate analysis of total lung volume and volumes of regional lung parenchyma. Additionally, reproducible segmentation allows for quantification of specific pathologic features, such as lower intensity pixels, which are characteristic of abnormal air spaces in diseases like emphysema.

Case report 868. Congenital bilateral spondylolysis and spondylolisthesis of the fourth cervical vertebra.

PubMed

Jeyapalan, K; Chavda, S V

1994-10-01

A case of congenital bilateral spondylolysis of fourth cervical vertebra was reported and the characteristic radiological features shown. Although the diagnosis is often suggested by the plain films, demonstration of the typical CT findings is often necessary to reach a final diagnosis. Awareness of this entity and its specific radiological features will help to differentiate this relatively benign cervical anomaly from other, more ominous, unstable causes of cervical spondylolisthesis such as those related to acute cervical injury. It may also prevent any inappropriate treatment from being undertaken.

Wind tunnel tests of the dynamic characteristics of the fluidic rudder

NASA Technical Reports Server (NTRS)

Belsterling, C. A.

1976-01-01

The fourth phase is given of a continuing program to develop the means to stabilize and control aircraft without moving parts or a separate source of power. Previous phases have demonstrated the feasibility of (1) generating adequate control forces on a standard airfoil, (2) controlling those forces with a fluidic amplifier and (3) cascading non-vented fluidic amplifiers operating on ram air supply pressure. The foremost objectives of the fourth phase covered under Part I of this report were to demonstrate a complete force-control system in a wind tunnel environment and to measure its static and dynamic control characteristics. Secondary objectives, covered under Part II, were to evaluate alternate configurations for lift control. The results demonstrate an overall response time of 150 msec, confirming this technology as a viable means for implementing low-cost reliable flight control systems.

Metatarsal Shape and Foot Type: A Geometric Morphometric Analysis.

PubMed

Telfer, Scott; Kindig, Matthew W; Sangeorzan, Bruce J; Ledoux, William R

2017-03-01

Planus and cavus foot types have been associated with an increased risk of pain and disability. Improving our understanding of the geometric differences between bones in different foot types may provide insights into injury risk profiles and have implications for the design of musculoskeletal and finite-element models. In this study, we performed a geometric morphometric analysis on the geometry of metatarsal bones from 65 feet, segmented from computed tomography (CT) scans. These were categorized into four foot types: pes cavus, neutrally aligned, asymptomatic pes planus, and symptomatic pes planus. Generalized procrustes analysis (GPA) followed by permutation tests was used to determine significant shape differences associated with foot type and sex, and principal component analysis was used to find the modes of variation for each metatarsal. Significant shape differences were found between foot types for all the metatarsals (p < 0.01), most notably in the case of the second metatarsal which showed significant pairwise differences across all the foot types. Analysis of the principal components of variation showed pes cavus bones to have reduced cross-sectional areas in the sagittal and frontal planes. The first (p = 0.02) and fourth metatarsals (p = 0.003) were found to have significant sex-based differences, with first metatarsals from females shown to have reduced width, and fourth metatarsals from females shown to have reduced frontal and sagittal plane cross-sectional areas. Overall, these findings suggest that metatarsal bones have distinct morphological characteristics that are associated with foot type and sex, with implications for our understanding of anatomy and numerical modeling of the foot.

Fast Multilevel Solvers for a Class of Discrete Fourth Order Parabolic Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Bin; Chen, Luoping; Hu, Xiaozhe

2016-03-05

In this paper, we study fast iterative solvers for the solution of fourth order parabolic equations discretized by mixed finite element methods. We propose to use consistent mass matrix in the discretization and use lumped mass matrix to construct efficient preconditioners. We provide eigenvalue analysis for the preconditioned system and estimate the convergence rate of the preconditioned GMRes method. Furthermore, we show that these preconditioners only need to be solved inexactly by optimal multigrid algorithms. Our numerical examples indicate that the proposed preconditioners are very efficient and robust with respect to both discretization parameters and diffusion coefficients. We also investigatemore » the performance of multigrid algorithms with either collective smoothers or distributive smoothers when solving the preconditioner systems.« less

Critical study of higher order numerical methods for solving the boundary-layer equations

NASA Technical Reports Server (NTRS)

Wornom, S. F.

1978-01-01

A fourth order box method is presented for calculating numerical solutions to parabolic, partial differential equations in two variables or ordinary differential equations. The method, which is the natural extension of the second order box scheme to fourth order, was demonstrated with application to the incompressible, laminar and turbulent, boundary layer equations. The efficiency of the present method is compared with two point and three point higher order methods, namely, the Keller box scheme with Richardson extrapolation, the method of deferred corrections, a three point spline method, and a modified finite element method. For equivalent accuracy, numerical results show the present method to be more efficient than higher order methods for both laminar and turbulent flows.

Sex and Social Influence: Does Sex Function as a Status Characteristic in Mixed-Sex Groups of Children?

ERIC Educational Resources Information Center

Lockheed, Marlaine E.; And Others

1983-01-01

The purpose of this study was to determine (1) whether sex operated as a diffuse status characteristic in mixed-sex groups of fourth- and fifth-grade children (n=168), and (2) whether an intervention based on expectation states theory would be successful in changing the status relationships within such groups. (PN)

Reading Instruction for Fourth-Grade Struggling Readers and the Relation to Student Outcomes

ERIC Educational Resources Information Center

Kent, Shawn C.; Wanzek, Jeanne; Al Otaiba, Stephanie

2017-01-01

The present study examined the amount, type, and quality of Tier 1 and supplemental reading instruction provided to 4th-grade struggling readers and whether specific elements of instruction predicted growth in reading skills. In all, 110 students identified as having reading difficulty who were receiving school-based reading instruction in 22…

20 CFR 655.537 - The fourth attestation element for locations in Alaska: Notice of filing.

Code of Federal Regulations, 2010 CFR

2010-04-01

... this section shall include a copy of the Form ETA 9033-A to be submitted to ETA, shall provide... of ETA, and shall include the following statement: “Complaints alleging a misrepresentation of... ETA 9033-A. Such documentation shall include a copy of the notices provided, as required by paragraph...

The Fourth R: A Visual Arts Curriculum Handbook.

ERIC Educational Resources Information Center

Hastings, Kathryn Kusche

This handbook contains ideas for basic visual arts production in grades K through 6, and gives suggestions for using the ideas in art and interdisciplinary lessons. The book is organized into 5 sections. The Introduction provides a Table of Activities that serves as a reference to the art elements addressed by specific activities. Section 2,…

An Investigation of Two Methods of Teaching Poetry to Children in the Fourth Grade.

ERIC Educational Resources Information Center

Shapiro, Phyllis Pearl

To develop an adequate methodology for helping children to express themselves poetically, two alternative programs for the teaching of poetry writing were developed. The "free" approach, which attempted to encourage the writing of poetry through exposure to "good" poetry, consisted of a series of poems arranged around selected elements of poetry…

Examining the Relationship between Value-Added Results and Elements of Teacher Effectiveness

ERIC Educational Resources Information Center

Holloway, Carla Euniece

2014-01-01

The purpose of this quantitative, correlational study was to determine if student growth as measured by value-added measure of fourth grade 2011-2012 reading test scores was correlated with teacher observation ratings on the Teach and Cultivate Learning Environment domains of the Teaching and Learning Framework Rubric. A second purpose of the…

A National Longitudinal Survey of Medical Students' Intentions to Practice Among the Underserved.

PubMed

O'Connell, Thomas F; Ham, Sandra A; Hart, Theodore G; Curlin, Farr A; Yoon, John D

2018-01-01

To explore students' intentions to practice in medically underserved areas. In January 2011, 960 third-year medical students from 24 MD-granting U.S. medical schools were invited to participate in a survey on their intention to practice in a medically underserved area. A follow-up survey was sent to participants in September 2011. Covariates included student demographics, medical school characteristics, environmental exposures, work experiences, sense of calling, and religious characteristics. Adjusted response rates were 564/919 (61.4%, first survey) and 474/564 (84.0%, follow-up survey). Among fourth-year medical students, an estimated 34.3% had an intention to practice among the underserved. In multivariate logistic regression modeling, predictors for intentions to practice among the underserved included growing up in an underserved setting (odds ratio [OR] range: 2.96-4.81), very strong sense of calling (OR range: 1.86-3.89), and high medical school social mission score (in fourth year: OR = 2.34 [95% confidence interval (CI), 1.31-4.21]). International experience was associated with favorable change of mind in the fourth year (OR = 2.86 [95% CI, 1.13-7.24]). High intrinsic religiosity was associated with intentions to practice primary care in underserved settings (in fourth year: OR = 2.29 [95% CI = 1.13-4.64]). Growing up in medically underserved settings, work experience in religiously affiliated organizations, very strong sense of calling, and high medical school social mission score were associated with intentions to practice in underserved areas. Lack of formative educational experiences may dissuade students from considering underserved practice.

Characteristics of the fourth order resonance in high intensity linear accelerators

NASA Astrophysics Data System (ADS)

Jeon, D.; Hwang, Kyung Ryun

2017-06-01

For the 4σ = 360° space-charge resonance in high intensity linear accelerators, the emittance growth is surveyed for input Gaussian beams, as a function of the depressed phase advance per cell σ and the initial tune depression (σo - σ). For each data point, the linac lattice is designed such that the fourth order resonance dominates over the envelope instability. The data show that the maximum emittance growth takes place at σ ≈ 87° over a wide range of the tune depression (or beam current), which confirms that the relevant parameter for the emittance growth is σ and that for the bandwidth is σo - σ. An interesting four-fold phase space structure is observed that cannot be explained with the fourth order resonance terms alone. Analysis attributes this effect to a small negative sixth order detuning term as the beam is redistributed by the resonance. Analytical studies show that the tune increases monotonically for the Gaussian beam which prevents the resonance for σ > 90°. Frequency analysis indicates that the four-fold structure observed for input Kapchinskij-Vladmirskij beams when σ < 90°, is not the fourth order resonance but a fourth order envelope instability because the 1/4 = 90°/360° component is missing in the frequency spectrum.

Elemental mass spectroscopy of remote surfaces from laser-induced plasmas

NASA Technical Reports Server (NTRS)

Situ, W.; DeYoung, R. J.

1994-01-01

The elemental mass analysis of laser-produced ions from Al, Cu, Ge, Ag, and a lunar simulant target when irradiated by a 400-mJ, 8-ns, Nd: YAG laser at 1 x 10(exp 9) W/cm(exp 2), is reported. Ions traveled down a 11.1-m evacuated tube to an ion-trap 1-m time-of-flight (TOF) mass spectrometer where an elemental mass spectrum was recorded. The amount of target material removed per laser pulse and the ionization fraction were measured. The ion spatial distribution was measured at 11.1-m distance and found to be near a fourth-power cosine distribution. These results indicate the ability to mass analyze a surface over a distance of many kilometers for lunar and asteroid surface elemental mass analysis by a remote satellite or lunar rover.

First observation of the fourth neutral polarization point in the atmosphere

NASA Astrophysics Data System (ADS)

Horvath, Gabor; Bernath, Balazs; Suhai, Bence; Barta, Andras; Wehner, Rudiger

2002-10-01

In the clear sky there are three commonly known loci, the Arago, Babinet, and Brewster neutral points, where the skylight is unpolarized. These peculiar celestial points, bearing the names of their discoverers, have been the subject of many ground-based investigations, because their positions are sensitive indicators of the amount and type of atmospheric turbidity. According to theoretical considerations and computer simulations, there should exist an additional neutral point approximately opposite to the Babinet point, which can be observed only at higher altitudes in the air or space. Until now, this anonymous fourth neutral point has not been observed during air- or space-borne polarimetric experiments and has been forgotten, in spite of the fact that the neutral points were a basic tool in atmospheric research for a century. Here, we report on the first observation of this fourth neutral point from a hot air balloon. Using 180-field-of-view imaging polarimetry, we could observe the fourth neutral point at 450, 550, and 650 nm from different altitudes between 900 and 3500 m during and after sunrise at approximately 2240 below the anti-solar point along the anti-solar meridian, depending on the wavelength and solar elevation. We show that the fourth neutral point exists at the expected location and has characteristics similar to those of the Arago, Babinet, and Brewster points. We discuss why the fourth neutral point has not been observed in previous air- or space-borne polarimetric experiments. 2002 Optical Society of America

Compact multi-bounce projection system for extreme ultraviolet projection lithography

DOEpatents

Hudyma, Russell M.

2002-01-01

An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four optical elements providing five reflective surfaces for projecting a mask image onto a substrate. The five optical surfaces are characterized in order from object to image as concave, convex, concave, convex and concave mirrors. The second and fourth reflective surfaces are part of the same optical element. The optical system is particularly suited for ring field step and scan lithography methods. The invention uses aspheric mirrors to minimize static distortion and balance the static distortion across the ring field width, which effectively minimizes dynamic distortion.

Flow transition with 2-D roughness elements in a 3-D channel

NASA Technical Reports Server (NTRS)

Liu, Zhining; Liu, Chaoquin; Mccormick, Stephen F.

1993-01-01

We develop a new numerical approach to study the spatially evolving instability of the streamwise dominant flow in the presence of roughness elements. The difficulty in handling the flow over the boundary surface with general geometry is removed by using a new conservative form of the governing equations and an analytical mapping. The numerical scheme uses second-order backward Euler in time, fourth-order central differences in all three spatial directions, and boundary-fitted staggered grids. A three-dimensional channel with multiple two-dimensional-type roughness elements is employed as the test case. Fourier analysis is used to decompose different Fourier modes of the disturbance. The results show that surface roughness leads to transition at lower Reynolds number than for smooth channels.

Magnetic heat pumping

NASA Technical Reports Server (NTRS)

Brown, G. V. (Inventor)

1978-01-01

A ferromagnetic or ferrimagnetic element is used to control the temperature and applied magnetic field of the element to cause the state of the element as represented on a temperature-magnetic entropy diagram to repeatedly traverse a loop. The loop may have a first portion of concurrent substantially isothermal or constant temperature and increasing applied magnetic field, a second portion of lowering temperature and constant applied magnetic field, a third portion of isothermal and decreasing applied magnetic field, and a fourth portion of increasing temperature and constant applied magnetic field. Other loops may be four-sided, with two isotherms and two adiabats. Preferably, a regenerator is used to enhance desired cooling or heating effects, with varied magnetic fields, or varying temperatures including three-sided figures traversed by the representative point.

Manual on uniform traffic control devices for streets and highways

DOT National Transportation Integrated Search

1995-02-01

The fourth working paper in Phase 1 of the Comprehensive Truck Size and Weight Study discusses the technical relationships of policy consequence concerning bridges. It presents information on bridge design considerations, truck characteristics affect...

Graduate Training in Helping Relationships: Helpful or Harmful?

ERIC Educational Resources Information Center

Spielberg, Gil

1980-01-01

Investigated graduate training experience in psychology and social work, focusing on certain therapist characteristics. Students in both programs improved throughout graduate education. Fourth-year students in psychology, however, showed a slight drop in facilitative responses. (JMF)

Ecological, psychological, and cognitive components of reading difficulties: testing the component model of reading in fourth graders across 38 countries.

PubMed

Chiu, Ming Ming; McBride-Chang, Catherine; Lin, Dan

2012-01-01

The authors tested the component model of reading (CMR) among 186,725 fourth grade students from 38 countries (45 regions) on five continents by analyzing the 2006 Progress in International Reading Literacy Study data using measures of ecological (country, family, school, teacher), psychological, and cognitive components. More than 91% of the differences in student difficulty occurred at the country (61%) and classroom (30%) levels (ecological), with less than 9% at the student level (cognitive and psychological). All three components were negatively associated with reading difficulties: cognitive (student's early literacy skills), ecological (family characteristics [socioeconomic status, number of books at home, and attitudes about reading], school characteristics [school climate and resources]), and psychological (students' attitudes about reading, reading self-concept, and being a girl). These results extend the CMR by demonstrating the importance of multiple levels of factors for reading deficits across diverse cultures.

Acute HIV infection (AHI) in a specialized clinical setting: case-finding, description of virological, epidemiological and clinical characteristics.

PubMed

Ammassari, Adriana; Abbate, Isabella; Orchi, Nicoletta; Pinnetti, Carmela; Rozera, Gabriella; Libertone, Raffaella; Pierro, Paola; Martini, Federico; Puro, Vincenzo; Girardi, Enrico; Antinori, Andrea; Capobianchi, Maria Rosaria

2014-01-01

Diagnosis of HIV infection during early stages is mandatory to catch up with the challenge of limiting HIV viral replication and reservoirs formation, as well as decreasing HIV transmissions by immediate cART initiation. Aims were to describe (a) virological characteristics of AHI identified, (b) epidemiological and clinical factors associated with being diagnosed with AHI. Cross-sectional, retrospective study. All individuals diagnosed with AHI according to Fiebig's staging between Jan 2013 and Mar 2014 at the INMI "L. Spallanzani" were included. Serum samples reactive to a fourth generation HIV-1/2 assay (Architect HIV Ag/Ab Combo, Abbott) were retested with another fourth generation assay (VIDAS DUO HIV Ultra, Biomérieux) and underwent confirmation with HIV-1 WB (New Lav I Bio-Rad) and/or with Geenius confirmatory assay (Bio-Rad). WHO criteria (two env products reactivity) were used to establish positivity of confirmatory assays. In case of clinically suspected AHI, HIV-1 RNA (Real time, Abbott) and p24 assay (VIDAS HIV P24 Bio-Rad) were also performed. Avidity test was carried out, on confirmed positive samples lacking p31 reactivity, to discriminate between recent (true Fiebig V phase) and late infections; to avoid possible misclassifications, clinical data were also used. Demographic, epidemiological, clinical and laboratory data are routinely, and anonymously recorded in the SENDIH and SIREA studies. During the study period, we observed 483 newly HIV diagnosed individuals, of whom 40 were identified as AHI (8.3%). Fiebig classification showed: 7 stage II/III, 13 stage IV, 20 stage V. Demographic, epidemiological, and clinical characteristics of patients are shown in the Table. Overall, the study population had a median S/Co ratio at fourth generation EIA (Architect) of 49.50 (IQR, 23.54-98.05): values were significantly lower in Fiebig II-IV than in Fiebig V (38.68 [IQR, 20.08-54.84] vs 75.72 [IQR, 42.66-249.80], p=0.01). Overall, median HIV-1 RNA was 5.44 log copies/mL (IQR, 4.29-6.18) and the value observed in Fiebig phase II-IV was higher than that found in Fiebig stage V (6.10 [IQR, 5.49-7.00] vs 4.69 [3.71-5.44], p<0.001). Median CD4+ cell count was 596/mmc (IQR, 410-737). cART was started in 26 patients: TDF/FTC/DRV/r/RAL=18; TDF/FTC/DRV/r=2; TDF/FTC/ATV/r=2; TDF+FTC+EFV=2; TDF/FTC/RAL=1; DRV/r+RAL=1. Integration of careful epidemiological investigation, partner notification, and technical advances in virological testing are key elements in AHI case-finding. Significant differences were found between Fiebig stages II-IV and Fiebig V with regard to virological exams.

Rotating stall investigation of 0.72 hub-tip ratio single-stage compressor

NASA Technical Reports Server (NTRS)

Graham, Robert W; Prian, Vasily D

1954-01-01

The rotating stall characteristics of a 0.72 hub-tip ratio, single-stage compressor were investigated. The stage was a 14-inch-diameter replica of the fourth stage of an experimental multistage compressor. No similarity existed between the frequency and propagation rate of the stall patterns observed in the single-stage replica and those observed in the multistage compressor after the fourth stage. A fatigue failure of the rotor blades occurred during the testing which was attributed to a resonance between the stall frequency and the natural bending frequency of the blades.

High School English IV: Comparative Mythology. Revised Edition.

ERIC Educational Resources Information Center

Clark, Karen J.

This modular curriculum for independent study by high school students is a one-fourth unit credit course on Comparative Mythology. The aims of the course are to help the student to: (1) become aware of the orally transmitted culture in their lives; (2) become aware of the mythical element in all of man's history; (3) know the meanings of the…

The New Youth Entrepreneur: How To Sell Your Idea. The "What's in It for Me" (WIIFM) Factor. Module 4.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur currriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the fourth module, which focuses on issues related to marketing, such as market niches and research,…

Reducing Stereotyping among 4th through 6th Grade Students by Strengthening Self-Esteem, Interpersonal Relationships, and Multicultural Appreciation.

ERIC Educational Resources Information Center

Gross, Judith Schefkind

This practicum study devised and evaluated a program designed to reduce overt incidents of stereotyping among diverse fourth through sixth graders in a large urban K-8 school. The 8-month intervention was comprised of six elements: (1) establishing a safe secure classroom atmosphere governed by consistent authoritative discipline; (2) building…

Deformation of a plate with periodically changing parameters

NASA Astrophysics Data System (ADS)

Naumova, Natalia V.; Ivanov, Denis; Voloshinova, Tatiana

2018-05-01

Deformation of reinforced square plate under external pressure is considered. The averaged fourth-order partial differential equation for the plate deflection w is obtained. The new mathematical model of the plate is offered. Asymptotic averaging and Finite Elements Method (ANSYS) are used to get the values of normal deflections of the plate surface. The comparison of numerical and asymptotic results is performed.

Liposarcoma of bone with osteosarcomatous foci: Case report and review of the literature

DOE Office of Scientific and Technical Information (OSTI.GOV)

Downey, E.F. Jr.; Worsham, G.F.; Brower, A.C.

1982-03-01

A case of liposarcoma arising in bone with rare foci osteosarcoma is reported. In this case, the tumor metastasized to the lungs as osteosarcoma. This is the third documented case and the fourth known case in the literature. Its rarity is somewhat surprising considering the innumerable possibilities of differentiation of the mesenchyme elements present in the bone marrow.

Factors Affecting Early Elementary (K-4) Teachers' Introduction of the Nature of Science: A National Survey

ERIC Educational Resources Information Center

Sweeney, Sophia Jean

2010-01-01

A researcher-developed questionnaire regarding the importance and developmental appropriateness of 12 specific elements of the nature of science (Alshamrani, 2008) for early elementary (kindergarten through fourth grade [K-4]) science instruction was mailed to a random sample of U.S. K-4 teachers. At least half (N = 377) of the respondents…

Silent internal sinus of the pyriform fossa: a rare adult manifestation of a branchial anomaly.

PubMed

Lin, Chao-Jung; Lin, Yaoh-Shiang; Kang, Bor-Hwang; Lee, Jin-Chin

2003-03-01

Branchial anomalies present with a wide range of pathologic characteristics, including cysts, fistulas, and sinuses of the head and neck region. Branchial cysts are most commonly diagnosed during the second through fourth decades of life, while branchial sinuses and fistulas are diagnosed almost exclusively in children with infection episodes. Only rarely has an internal sinus of a third or fourth branchial anomaly manifested in adults as a noninfectious swelling in the neck during swallowing. In this report, we describe our experience treating a 21-year-old man with a left-sided swallowing-induced neck protrusion of 10 years' duration. Findings of physical examination, videolaryngoscopy, and a pharyngoesophagogram confirmed the diagnosis of internal sinus of the pyriform fossa, with uncertain origin of a third or fourth branchial anomaly. The patient underwent regular follow-up as an outpatient and experienced no further infectious episodes.

Skeletons Not Just for Halloween.

ERIC Educational Resources Information Center

Markle, Sandra; And Others

1983-01-01

A teaching unit that helps fourth-, fifth-, and sixth-grade students learn about human and animal skeletal systems is described. The unit focuses on bone characteristics and develops basic science skills, such as observation, data collection, and making and testing hypotheses. (PP)

Transverse pumped laser amplifier architecture

DOEpatents

Bayramian, Andrew James; Manes, Kenneth R.; Deri, Robert; Erlandson, Alvin; Caird, John; Spaeth, Mary L.

2015-05-19

An optical gain architecture includes a pump source and a pump aperture. The architecture also includes a gain region including a gain element operable to amplify light at a laser wavelength. The gain region is characterized by a first side intersecting an optical path, a second side opposing the first side, a third side adjacent the first and second sides, and a fourth side opposing the third side. The architecture further includes a dichroic section disposed between the pump aperture and the first side of the gain region. The dichroic section is characterized by low reflectance at a pump wavelength and high reflectance at the laser wavelength. The architecture additionally includes a first cladding section proximate to the third side of the gain region and a second cladding section proximate to the fourth side of the gain region.

Transverse pumped laser amplifier architecture

DOEpatents

Bayramian, Andrew James; Manes, Kenneth; Deri, Robert; Erlandson, Al; Caird, John; Spaeth, Mary

2013-07-09

An optical gain architecture includes a pump source and a pump aperture. The architecture also includes a gain region including a gain element operable to amplify light at a laser wavelength. The gain region is characterized by a first side intersecting an optical path, a second side opposing the first side, a third side adjacent the first and second sides, and a fourth side opposing the third side. The architecture further includes a dichroic section disposed between the pump aperture and the first side of the gain region. The dichroic section is characterized by low reflectance at a pump wavelength and high reflectance at the laser wavelength. The architecture additionally includes a first cladding section proximate to the third side of the gain region and a second cladding section proximate to the fourth side of the gain region.

Characteristics of the fourth order resonance in high intensity linear accelerators

DOE PAGES

Jeon, D.; Hwang, Kyung Ryun

2017-06-19

For the 4σ = 360° space-charge resonance in high intensity linear accelerators, the emittance growth is surveyed for input Gaussian beams, as a function of the depressed phase advance per cell σ and the initial tune depression (σ o – σ). For each data point, the linac lattice is designed such that the fourth order resonance dominates over the envelope instability. Additionally, the data show that the maximum emittance growth takes place at σ ≈ 87° over a wide range of the tune depression (or beam current), which confirms that the relevant parameter for the emittance growth is σ andmore » that for the bandwidth is σ o – σ. An interesting four-fold phase space structure is observed that cannot be explained with the fourth order resonance terms alone. Analysis attributes this effect to a small negative sixth order detuning term as the beam is redistributed by the resonance. Analytical studies show that the tune increases monotonically for the Gaussian beam which prevents the resonance for σ > 90°. Lastly, frequency analysis indicates that the four-fold structure observed for input Kapchinskij-Vladmirskij beams when σ < 90°, is not the fourth order resonance but a fourth order envelope instability because the 1/4 = 90°/360° component is missing in the frequency spectrum.« less

Characteristics of the fourth order resonance in high intensity linear accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeon, D.; Hwang, Kyung Ryun

For the 4σ = 360° space-charge resonance in high intensity linear accelerators, the emittance growth is surveyed for input Gaussian beams, as a function of the depressed phase advance per cell σ and the initial tune depression (σ o – σ). For each data point, the linac lattice is designed such that the fourth order resonance dominates over the envelope instability. Additionally, the data show that the maximum emittance growth takes place at σ ≈ 87° over a wide range of the tune depression (or beam current), which confirms that the relevant parameter for the emittance growth is σ andmore » that for the bandwidth is σ o – σ. An interesting four-fold phase space structure is observed that cannot be explained with the fourth order resonance terms alone. Analysis attributes this effect to a small negative sixth order detuning term as the beam is redistributed by the resonance. Analytical studies show that the tune increases monotonically for the Gaussian beam which prevents the resonance for σ > 90°. Lastly, frequency analysis indicates that the four-fold structure observed for input Kapchinskij-Vladmirskij beams when σ < 90°, is not the fourth order resonance but a fourth order envelope instability because the 1/4 = 90°/360° component is missing in the frequency spectrum.« less

Teaching for Different Learning Styles.

ERIC Educational Resources Information Center

Cropper, Carolyn

1994-01-01

This study examined learning styles in 137 high ability fourth-grade students. All students were administered two learning styles inventories. Characteristics of students with the following learning styles are summarized: auditory language, visual language, auditory numerical, visual numerical, tactile concrete, individual learning, group…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gates, J. M.; Gregorich, K. E.; Gothe, O. R.

In this study, forty-six decay chains, assigned to the decay of 288115, were produced using the 243Am ( 48Ca, 3n) 288115 reaction at the Lawrence Berkeley National Laboratory 88-in. cyclotron. The resulting series of α decays were studied using α-photon and α-x-ray spectroscopies. Multiple α-photon coincidences were observed in the element 115 decay chain members, particularly in the third- and fourth-generation decays (presumed to be 280Rg and 276Mt, respectively). Upon combining these data with those from 22 288115 decay chains observed in a similar experiment, updated level schemes in 276Mt and 272Bh (populated by the α decay of 280Rg andmore » 276Mt, respectively) are proposed. Additionally, photons were observed in the energy range expected for K x rays coincident with the α decay of both 280Rg and 276Mt. However, Compton scattering of higher-energy γ rays and discrete transitions are present in the K x-ray region preventing a definitive Z identification to be made based on observation of characteristic K x-ray energies.« less

Lithium brines: A global perspective: Chapter 14

USGS Publications Warehouse

Munk, LeeAnn; Hynek, Scott; Bradley, Dwight C.; Boutt, David; Labay, Keith A.; Jochens, Hillary; Verplanck, Philip L.; Hitzman, Murray W.

2016-01-01

Lithium is a critical and technologically important element that has widespread use, particularly in batteries for hybrid cars and portable electronic devices. Global demand for lithium has been on the rise since the mid-1900s and is projected to continue to increase. Lithium is found in three main deposit types: (1) pegmatites, (2) continental brines, and (3) hydrothermally altered clays. Continental brines provide approximately three-fourths of the world’s Li production due to their relatively low production cost. The Li-rich brine systems addressed here share six common characteristics that provide clues to deposit genesis while also serving as exploration guidelines. These are as follows: (1) arid climate; (2) closed basin containing a salar (salt crust), a salt lake, or both; (3) associated igneous and/or geothermal activity; (4) tectonically driven subsidence; (5) suitable lithium sources; and (6) sufficient time to concentrate brine. Two detailed case studies of Li-rich brines are presented; one on the longest produced lithium brine at Clayton Valley, Nevada, and the other on the world’s largest producing lithium brine at the Salar de Atacama, Chile.

Two-level schemes for the advection equation

NASA Astrophysics Data System (ADS)

Vabishchevich, Petr N.

2018-06-01

The advection equation is the basis for mathematical models of continuum mechanics. In the approximate solution of nonstationary problems it is necessary to inherit main properties of the conservatism and monotonicity of the solution. In this paper, the advection equation is written in the symmetric form, where the advection operator is the half-sum of advection operators in conservative (divergent) and non-conservative (characteristic) forms. The advection operator is skew-symmetric. Standard finite element approximations in space are used. The standard explicit two-level scheme for the advection equation is absolutely unstable. New conditionally stable regularized schemes are constructed, on the basis of the general theory of stability (well-posedness) of operator-difference schemes, the stability conditions of the explicit Lax-Wendroff scheme are established. Unconditionally stable and conservative schemes are implicit schemes of the second (Crank-Nicolson scheme) and fourth order. The conditionally stable implicit Lax-Wendroff scheme is constructed. The accuracy of the investigated explicit and implicit two-level schemes for an approximate solution of the advection equation is illustrated by the numerical results of a model two-dimensional problem.

Finite element implementation of a thermo-damage-viscoelastic constitutive model for hydroxyl-terminated polybutadiene composite propellant

NASA Astrophysics Data System (ADS)

Xu, Jinsheng; Han, Long; Zheng, Jian; Chen, Xiong; Zhou, Changsheng

2017-11-01

A thermo-damage-viscoelastic model for hydroxyl-terminated polybutadiene (HTPB) composite propellant with consideration for the effect of temperature was implemented in ABAQUS. The damage evolution law of the model has the same form as the crack growth equation for viscoelastic materials, and only a single damage variable S is considered. The HTPB propellant was considered as an isotropic material, and the deviatoric and volumetric strain-stress relations are decoupled and described by the bulk and shear relaxation moduli, respectively. The stress update equations were expressed by the principal stresses σ_{ii}R and the rotation tensor M, the Jacobian matrix in the global coordinate system J_{ijkl} was obtained according to the fourth-order tensor transformation rules. Two models having complex stress states were used to verify the accuracy of the constitutive model. The test results showed good agreement with the strain responses of characteristic points measured by a contactless optical deformation test system, which illustrates that the thermo-damage-viscoelastic model perform well at describing the mechanical properties of an HTPB propellant.

Evolutionary Optimization of Quadrifilar Helical and Yagi-Uda Antennas

NASA Technical Reports Server (NTRS)

Lohn, Jason D.; Kraus, William F.; Linden, Derek S.; Stoica, Adrian; Clancy, Daniel (Technical Monitor)

2002-01-01

We present optimization results obtained for two type of antennas using evolutionary algorithms. A quadrifilar helical UHF antenna is currently flying aboard NASA's Mars Odyssey spacecraft and is due to reach final Martian orbit insertion in January, 2002. Using this antenna as a benchmark, we ran experiments employing a coevolutionary genetic algorithm to evolve a quadrifilar helical design in-situ - i.e., in the presence of a surrounding structure. Results show a 93% improvement at 400 MHz and a 48% improvement at 438 MHz in the average gain. The evolved antenna is also one-fourth the size. Yagi-Uda antennas are known to be difficult to design and optimize due to their sensitivity at high gain and the inclusion of numerous parasitic elements. Our fitness calculation allows the implicit relationship between power gain and sidelobe/backlobe loss to emerge naturally, a technique that is less complex than previous approaches. Our results include Yagi-Uda antennas that have excellent bandwidth and gain properties with very good impedance characteristics. Results exceeded previous Yagi-Uda antennas produced via evolutionary algorithms by at least 7.8% in mainlobe gain.

Feasibility study for the implementation of NASTRAN on the ILLIAC 4 parallel processor

NASA Technical Reports Server (NTRS)

Field, E. I.

1975-01-01

The ILLIAC IV, a fourth generation multiprocessor using parallel processing hardware concepts, is operational at Moffett Field, California. Its capability to excel at matrix manipulation, makes the ILLIAC well suited for performing structural analyses using the finite element displacement method. The feasibility of modifying the NASTRAN (NASA structural analysis) computer program to make effective use of the ILLIAC IV was investigated. The characteristics are summarized of the ILLIAC and the ARPANET, a telecommunications network which spans the continent making the ILLIAC accessible to nearly all major industrial centers in the United States. Two distinct approaches are studied: retaining NASTRAN as it now operates on many of the host computers of the ARPANET to process the input and output while using the ILLIAC only for the major computational tasks, and installing NASTRAN to operate entirely in the ILLIAC environment. Though both alternatives offer similar and significant increases in computational speed over modern third generation processors, the full installation of NASTRAN on the ILLIAC is recommended. Specifications are presented for performing that task with manpower estimates and schedules to correspond.

Comparative study of species sensitivity distributions based on non-parametric kernel density estimation for some transition metals.

PubMed

Wang, Ying; Feng, Chenglian; Liu, Yuedan; Zhao, Yujie; Li, Huixian; Zhao, Tianhui; Guo, Wenjing

2017-02-01

Transition metals in the fourth period of the periodic table of the elements are widely widespread in aquatic environments. They could often occur at certain concentrations to cause adverse effects on aquatic life and human health. Generally, parametric models are mostly used to construct species sensitivity distributions (SSDs), which result in comparison for water quality criteria (WQC) of elements in the same period or group of the periodic table might be inaccurate and the results could be biased. To address this inadequacy, the non-parametric kernel density estimation (NPKDE) with its optimal bandwidths and testing methods were developed for establishing SSDs. The NPKDE was better fit, more robustness and better predicted than conventional normal and logistic parametric density estimations for constructing SSDs and deriving acute HC5 and WQC for transition metals in the fourth period of the periodic table. The decreasing sequence of HC5 values for the transition metals in the fourth period was Ti > Mn > V > Ni > Zn > Cu > Fe > Co > Cr(VI), which were not proportional to atomic number in the periodic table, and for different metals the relatively sensitive species were also different. The results indicated that except for physical and chemical properties there are other factors affecting toxicity mechanisms of transition metals. The proposed method enriched the methodological foundation for WQC. Meanwhile, it also provided a relatively innovative, accurate approach for the WQC derivation and risk assessment of the same group and period metals in aquatic environments to support protection of aquatic organisms. Copyright © 2016 Elsevier Ltd. All rights reserved.

A deficiency screen of the major autosomes identifies a gene (matrimony) that is haplo-insufficient for achiasmate segregation in Drosophila oocytes.

PubMed Central

Harris, David; Orme, Charisse; Kramer, Joseph; Namba, Luria; Champion, Mia; Palladino, Michael J; Natzle, Jeanette; Hawley, R Scott

2003-01-01

In Drosophila oocytes, euchromatic homolog-homolog associations are released at the end of pachytene, while heterochromatic pairings persist until metaphase I. A screen of 123 autosomal deficiencies for dominant effects on achiasmate chromosome segregation has identified a single gene that is haplo-insufficient for homologous achiasmate segregation and whose product may be required for the maintenance of such heterochromatic pairings. Of the deficiencies tested, only one exhibited a strong dominant effect on achiasmate segregation, inducing both X and fourth chromosome nondisjunction in FM7/X females. Five overlapping deficiencies showed a similar dominant effect on achiasmate chromosome disjunction and mapped the haplo-insufficient meiotic gene to a small interval within 66C7-12. A P-element insertion mutation in this interval exhibits a similar dominant effect on achiasmate segregation, inducing both high levels of X and fourth chromosome nondisjunction in FM7/X females and high levels of fourth chromosome nondisjunction in X/X females. The insertion site for this P element lies immediately upstream of CG18543, and germline expression of a UAS-CG18543 cDNA construct driven by nanos-GAL4 fully rescues the dominant meiotic defect. We conclude that CG18543 is the haplo-insufficient gene and have renamed this gene matrimony (mtrm). Cytological studies of prometaphase and metaphase I in mtrm hemizygotes demonstrate that achiasmate chromosomes are not properly positioned with respect to their homolog on the meiotic spindle. One possible, albeit speculative, interpretation of these data is that the presence of only a single copy of mtrm disrupts the function of whatever "glue" holds heterochromatically paired homologs together from the end of pachytene until metaphase I. PMID:14573476

Study on elemental fingerprint of traditional marine Chinese medicine oysters from Jiaozhou Bay, China

NASA Astrophysics Data System (ADS)

Zheng, Yongjun; Zheng, Kang; Li, Yantuan

2012-09-01

In order to investigate the relationship between the trace elements and the characteristics of the oysters, we analyzed the trace elements present in the germplasm of oysters from different producing areas in the Jiaozhou Bay. The element fingerprints were established to reflect the elemental characteristics of the oysters. Concentration patterns of the elements were deciphered by principle component analysis (PCA) and hierarchical cluster analysis (HCA). The six regions were discriminated with accuracy using HCA and PCA based on the concentration of 16 trace elements. The elements were viewed as characteristic elements of the oysters and the fingerprints of these elements could be used to distinguish the quality of the oysters.

The Relationship Between the Learning Style Perceptual Preferences of Urban Fourth Grade Children and the Acquisition of Selected Physical Science Concepts Through Learning Cycle Instructional Methodology.

NASA Astrophysics Data System (ADS)

Adams, Kenneth Mark

The purpose of this research was to investigate the relationship between the learning style perceptual preferences of fourth grade urban students and the attainment of selected physical science concepts for three simple machines as taught using learning cycle methodology. The sample included all fourth grade children from one urban elementary school (N = 91). The research design followed a quasi-experimental format with a single group, equivalent teacher demonstration and student investigation materials, and identical learning cycle instructional treatment. All subjects completed the Understanding Simple Machines Test (USMT) prior to instructional treatment, and at the conclusion of treatment to measure student concept attainment related to the pendulum, the lever and fulcrum, and the inclined plane. USMT pre and post-test scores, California Achievement Test (CAT-5) percentile scores, and Learning Style Inventory (LSI) standard scores for four perceptual elements for each subject were held in a double blind until completion of the USMT post-test. The hypothesis tested in this study was: Learning style perceptual preferences of fourth grade students as measured by the Dunn, Dunn, and Price Learning Style Inventory (LSI) are significant predictors of success in the acquisition of physical science concepts taught through use of the learning cycle. Analysis of pre and post USMT scores, 18.18 and 30.20 respectively, yielded a significant mean gain of +12.02. A controlled stepwise regression was employed to identify significant predictors of success on the USMT post-test from among USMT pre-test, four CAT-5 percentile scores, and four LSI perceptual standard scores. The CAT -5 Total Math and Total Reading accounted for 64.06% of the variance in the USMT post-test score. The only perceptual element to act as a significant predictor was the Kinesthetic standard score, accounting for 1.72% of the variance. The study revealed that learning cycle instruction does not appear to be sensitive to different perceptual preferences. Students with different preferences for auditory, visual, and tactile modalities, when learning, seem to benefit equally from learning cycle exposure. Increased use of a double blind for future learning styles research was recommended.

Concordance of common data elements for assessment of subjective cognitive complaints after mild-traumatic brain injury: a TRACK-TBI Pilot Study.

PubMed

Ngwenya, Laura B; Gardner, Raquel C; Yue, John K; Burke, John F; Ferguson, Adam R; Huang, Michael C; Winkler, Ethan A; Pirracchio, Romain; Satris, Gabriela G; Yuh, Esther L; Mukherjee, Pratik; Valadka, Alex B; Okonkwo, David O; Manley, Geoffrey T

2018-06-04

To determine characteristics and concordance of subjective cognitive complaints (SCCs) 6 months following mild-traumatic brain injury (mTBI) as assessed by two different TBI common data elements (CDEs). The Transforming Research and Clinical Knowledge in Traumatic Brain Injury (TRACK-TBI) Pilot Study was a prospective observational study that utilized the NIH TBI CDEs, Version 1.0. We examined variables associated with SCC, performance on objective cognitive tests (Wechsler Adult Intelligence Scale, California Verbal Learning Test, and Trail Making Tests A and B), and agreement on self-report of SCCs as assessed by the acute concussion evaluation (ACE) versus the Rivermead Post Concussion Symptoms Questionnaire (RPQ). In total, 68% of 227 participants endorsed SCCs at 6 months. Factors associated with SCC included less education, psychiatric history, and being assaulted. Compared to participants without SCC, those with SCC defined by RPQ performed significantly worse on all cognitive tests. There was moderate agreement between the two measures of SCCs (kappa = 0.567 to 0.680). We show that the symptom questionnaires ACE and RPQ show good, but not excellent, agreement for SCCs in an mTBI study population. Our results support the retention of RPQ as a basic CDE for mTBI research. BSI-18: Brief Symptom Inventory; 18CDEs: common data elements; CT: computed tomography; CVLT: California Verbal Learning Test; ED: emergency department; GCS: Glasgow coma scale; LOC: loss of consciousnessm; TBI: mild-traumatic brain injury; PTA: post-traumatic amnesia; SCC: subjective cognitive complaints; TBI: traumatic brain injury; TRACK-TBI: Transforming Research and Clinical Knowledge in Traumatic Brain Injury; TMT: Trail Making Test; WAIS-PSI: Wechsler Adult Intelligence Scale, Fourth Edition, Processing Speed Index.

Family influence: key to fruit and vegetable consumption among fourth- and fifth-grade students.

PubMed

Gross, Susan M; Pollock, Elizabeth Davenport; Braun, Bonnie

2010-01-01

To assess social and familial environmental influences on fruit and vegetable (FV) consumption of fourth- and fifth-graders living in a culturally diverse, urban setting. In 2006, students from 9 fourth- and fifth-grade classrooms from a public school in the Washington-Baltimore Metropolitan Region were recruited as part of the Food Stamp Nutrition Education's initiative to increase FV consumption among school-aged children in low-income schools. This intervention was conducted in partnership with the school. Ninety-three fourth- and fifth-grade students and their parents. The average daily FV consumption of elementary school students was the dependent variable. Home engagement (eg, student participation in menu planning and food selection at home), parental modeling, school environment, peer influences, and individual characteristics were the independent variables. Multiple regression analysis. Family and home environment factors explained more than 50% of the variance in students' FV consumption. Interventions designed to influence school-aged children's FV consumption should target family members and consider incorporating strategies to reach families and promote meal planning activities with the children in their homes. Copyright 2010 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

An Evaluation of FREESTYLE, A Television Series to Reduce Sex-Role Stereotypes. Research Report Series, Institute for Social Research.

ERIC Educational Resources Information Center

Johnston, Jerome; And Others

This study is the main element of the summative evaluation of "Freestyle," a television series on sex-role stereotyping and career awareness. The series was developed for fourth to sixth graders viewing it at home or at school and contains 13 half-hour episodes. In seven test sites across the country, 268 teachers used…

The Playing Field. A Curriculum Guide to Pesticide Education for Fourth, Fifth, and Sixth Grades. First Edition.

ERIC Educational Resources Information Center

Bellissemo, Diane; Garcia, Deliana

A pesticide safety video for children 9-12 years old, "The Playing Field," draws children into the lives of a migrant farmworker family while teaching them about the dangers of pesticides. The video and the lessons are not limited to migrant education, but open a multicultural window for all children, migrant or nonmigrant. Teaching elements for…

ICASE Semiannual Report, October 1, 1992 through March 31, 1993

DTIC Science & Technology

1993-06-01

NUMERICAL MATHEMATICS Saul Abarbanel Further results have been obtained regarding long time integration of high order compact finite difference schemes...overall accuracy. These problems are common to all numerical methods: finite differences , finite elements and spectral methods. It should be noted that...fourth order finite difference scheme. * In the same case, the D6 wavelets provide a sixth order finite difference , noncompact formula. * The wavelets

Proceedings of the 4th Annual Workshop: Advances in Smart Materials for Aerospace Applications

NASA Technical Reports Server (NTRS)

Hardy, Robin C. (Editor); Simpson, Joycelyn O. (Editor)

1996-01-01

The objective of the Fourth Annual Conference on Advances in Smart Materials for Aerospace Applications was to provide a forum for technical dialogue on numerous topics in the area of smart materials. The proceedings presented herein represent the technical contributions of the participants of the workshop. Topics addressed include shape memory alloys, ferroelectrics, fiber optics, finite element simulation, and active control.

Coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures

NASA Technical Reports Server (NTRS)

Mcknight, R. L.; Huang, H.; Hartle, M.

1992-01-01

Accomplishments are described for the fourth years effort of a 5-year program to develop a methodology for coupled structural/thermal/electromagnetic analysis/tailoring of graded component structures. These accomplishments include: (1) demonstration of coupled solution capability; (2) alternate CSTEM electromagnetic technology; (3) CSTEM acoustic capability; (4) CSTEM tailoring; (5) CSTEM composite micromechanics using ICAN; and (6) multiple layer elements in CSTEM.

Toward a Theoretical Model of Text Complexity for the Early Grades: Learning from the Past, Anticipating the Future

ERIC Educational Resources Information Center

Mesmer, Heidi Anne; Cunningham, James W.; Hiebert, Elfrieda H.

2012-01-01

In this conceptual essay, we offer rationales and evidence for critical components of a working model of text complexity for the early grades. In the first three sections of the article, we examine word-level, syntax-level, and discourse-level features of text, posing questions for future research. In the fourth section, we address elements of…

Intergenerational private transfers: Portugal in the European context.

PubMed

Albuquerque, Paula C

2014-12-01

Intergenerational private transfers should be made important as a common occurrence in familialistic societies when establishing the identity of Southern European welfare state regimes. They function as a safety net and as a way of reinforcing the bonds amongst elements in a family. Although Portugal is undoubtedly a Southern European country, it is frequently ignored in comparative studies, and is assumed to share the characteristics of Spain and Italy. But do these countries really belong to a common, distinctive model? Portugal was included in the fourth wave of the survey of health, ageing and retirement in Europe, which provides a large sample for the study of intergenerational private transfers in this country. It also enables comparison with what happens elsewhere in Europe. We examine the upward and downward flows between generations and identify several important determinants of each type of transfers. Additionally, we show that the different types and directions of transfers are positively correlated, pointing to a self-reinforcement of transfer behaviour in families. We find that Portugal has an especially low probability of private transfers of time and money. After taking into consideration the household-level characteristics, none of the countries included in this study has a significantly lower probability of occurrence of any type of transfer than that of Portugal. A Southern European specific pattern of family transfers is only partially confirmed, yet Portugal and Spain do share the same model.

Lead-free solder

DOEpatents

Anderson, Iver E.; Terpstra, Robert L.

2001-05-15

A Sn--Ag--Cu eutectic alloy is modified with one or more low level and low cost alloy additions to enhance high temperature microstructural stability and thermal-mechanical fatigue strength without decreasing solderability. Purposeful fourth or fifth element additions in the collective amount not exceeding about 1 weight % (wt. %) are added to Sn--Ag--Cu eutectic solder alloy based on the ternary eutectic Sn--4.7%Ag--1.7%Cu (wt. %) and are selected from the group consisting essentially of Ni, Fe, and like-acting elements as modifiers of the intermetallic interface between the solder and substrate to improve high temperature solder joint microstructural stability and solder joint thermal-mechanical fatigue strength.

Controlled Synthesis of Polyions of Heavy Main-Group Elements in Ionic Liquids

PubMed Central

Groh, Matthias F.; Wolff, Alexander; Grasser, Matthias A.; Ruck, Michael

2016-01-01

Ionic liquids (ILs) have been proven to be valuable reaction media for the synthesis of inorganic materials among an abundance of other applications in different fields of chemistry. Up to now, the syntheses have remained mostly “black boxes”; and researchers have to resort to trial-and-error in order to establish a new synthetic route to a specific compound. This review comprises decisive reaction parameters and techniques for the directed synthesis of polyions of heavy main-group elements (fourth period and beyond) in ILs. Several families of compounds are presented ranging from polyhalides over carbonyl complexes and selenidostannates to homo and heteropolycations. PMID:27598123

The Stratospheric Aerosol and Gas Experiment (SAGE III)

NASA Technical Reports Server (NTRS)

Thomason, Larry W.

1998-01-01

Three SAGE III instruments are being built by Ball Aerospace & Technologies Corporation in Boulder, Colorado (USA). SAGE III is a fourth generation instrument that incorporates robust elements of its predecessors [SAM II, SAGE, SAGE II] while incorporating new design elements. The first of these will be launched aboard a Russian Meteor/3M platform in May 1999. SAGE III will add measurements of O2-A band from which density and temperature profiles are retrieved. This feature should improve refraction and Rayleigh computations over earlier. Additionally, the linear array of detectors will permit on-orbit wavelength calibration from observations of the exo-atmospheric solar Fraunhofer spectrum.

P16.30 4th ventricle glioblastoma

PubMed Central

Unal, E.; Isik, S.; Gurbuz, M.; Kilic, K.

2017-01-01

Abstract Introduction: We present the 2nd case ever known in English literature describing a glioblastoma of the fourth ventricle originating from cerebellar peduncle. CASE DESCIPTION: A 66 years old woman was admitted to hospital with dizziness and nausea for four months. An MRI scan showed fourth ventricle mass. First impression was an ependymoma due to MRI scan characteristics. Results: A surgery was performed and histopathology revealed Grade IV glial tumor. Radiotherapy was done. CONCLUSION: This report suggests that GBM can mimic every tumor in the CNS. Surgery is the best option for these tumors not only for aggressive behaviour of glioblastoma but also to prevent hydrocephalus and associated symptoms.

Animation, Incidental Learning, and Continuing Motivation.

ERIC Educational Resources Information Center

Rieber, Lloyd P.

1991-01-01

Effects of animated graphics presentations on incidental learning and the degree to which various computer practice activities contain intrinsically motivating characteristics were studied with 70 fourth graders learning about Newton's laws of motion. Incidental learning occurred without sacrifice of intentional learning. Students were highly…

Addressable test matrix for measuring analog transfer characteristics of test elements used for integrated process control and device evaluation

NASA Technical Reports Server (NTRS)

Buehler, Martin G. (Inventor)

1988-01-01

A set of addressable test structures, each of which uses addressing schemes to access individual elements of the structure in a matrix, is used to test the quality of a wafer before integrated circuits produced thereon are diced, packaged and subjected to final testing. The electrical characteristic of each element is checked and compared to the electrical characteristic of all other like elements in the matrix. The effectiveness of the addressable test matrix is in readily analyzing the electrical characteristics of the test elements and in providing diagnostic information.

Benefits of extensive recruitment effort persist during follow-ups and are consistent across age group and survey method. The TRAILS study

PubMed Central

2012-01-01

Background Extensive recruitment effort at baseline increases representativeness of study populations by decreasing non-response and associated bias. First, it is not known to what extent increased attrition occurs during subsequent measurement waves among subjects who were hard-to-recruit at baseline and what characteristics the hard-to-recruit dropouts have compared to the hard-to-recruit retainers. Second, it is unknown whether characteristics of hard-to-recruit responders in a prospective population based cohort study are similar across age group and survey method. Methods First, we compared first wave (T1) easy-to-recruit with hard-to-recruit responders of the TRacking Adolescents’ Individual Lives Survey (TRAILS), a prospective population based cohort study of Dutch (pre)adolescents (at first wave: n = 2230, mean age = 11.09 (SD 0.56), 50.8% girls), with regard to response rates at subsequent measurement waves. Second, easy-to-recruit and hard-to-recruit participants at the fourth TRAILS measurement wave (n = 1881, mean age = 19.1 (SD 0.60), 52.3% girls) were compared with fourth wave non-responders and earlier stage drop-outs on family composition, socioeconomic position (SEP), intelligence (IQ), education, sociometric status, substance use, and psychopathology. Results First, over 60% of the hard-to-recruit responders at the first wave were retained in the sample eight years later at the fourth measurement wave. Hard-to-recruit dropouts did not differ from hard-to-recruit retainers. Second, extensive recruitment efforts for the web based survey convinced a population of nineteen year olds with similar characteristics as the hard-to-recruit eleven year olds that were persuaded to participate in a school-based survey. Some characteristics associated with being hard-to-recruit (as compared to being easy-to-recruit) were more pronounced among non-responders, resembling the baseline situation (De Winter et al.2005). Conclusions First, extensive recruitment effort at the first assessment wave of a prospective population based cohort study has long lasting positive effects. Second, characteristics of hard-to-recruit responders are largely consistent across age groups and survey methods. PMID:22747967

Transportation-Driven Mars Surface Operations Supporting an Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Toups, Larry; Brown, Kendall; Hoffman, Stephen J.

2015-01-01

This paper describes the results of a study evaluating options for supporting a series of human missions to a single Mars surface destination. In this scenario the infrastructure emplaced during previous visits to this site is leveraged in following missions. The goal of this single site approach to Mars surface infrastructure is to enable "Steady State" operations by at least 4 crew for up to 500 sols at this site. These characteristics, along with the transportation system used to deliver crew and equipment to and from Mars, are collectively known as the Evolvable Mars Campaign (EMC). Information in this paper is presented in the sequence in which it was accomplished. First, a logical buildup sequence of surface infrastructure was developed to achieve the desired "Steady State" operations on the Mars surface. This was based on a concept of operations that met objectives of the EMC. Second, infrastructure capabilities were identified to carry out this concept of operations. Third, systems (in the form of conceptual elements) were identified to provide these capabilities. This included top-level mass, power and volume estimates for these elements. Fourth, the results were then used in analyses to evaluate three options (18t, 27t, and 40t landed mass) of Mars Lander delivery capability to the surface. Finally, Mars arrival mass estimates were generated based upon the entry, descent, and landing requirements for inclusion in separate assessments of in-space transportation capabilities for the EMC.

A harmonic polynomial cell (HPC) method for 3D Laplace equation with application in marine hydrodynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shao, Yan-Lin, E-mail: yanlin.shao@dnvgl.com; Faltinsen, Odd M.

2014-10-01

We propose a new efficient and accurate numerical method based on harmonic polynomials to solve boundary value problems governed by 3D Laplace equation. The computational domain is discretized by overlapping cells. Within each cell, the velocity potential is represented by the linear superposition of a complete set of harmonic polynomials, which are the elementary solutions of Laplace equation. By its definition, the method is named as Harmonic Polynomial Cell (HPC) method. The characteristics of the accuracy and efficiency of the HPC method are demonstrated by studying analytical cases. Comparisons will be made with some other existing boundary element based methods,more » e.g. Quadratic Boundary Element Method (QBEM) and the Fast Multipole Accelerated QBEM (FMA-QBEM) and a fourth order Finite Difference Method (FDM). To demonstrate the applications of the method, it is applied to some studies relevant for marine hydrodynamics. Sloshing in 3D rectangular tanks, a fully-nonlinear numerical wave tank, fully-nonlinear wave focusing on a semi-circular shoal, and the nonlinear wave diffraction of a bottom-mounted cylinder in regular waves are studied. The comparisons with the experimental results and other numerical results are all in satisfactory agreement, indicating that the present HPC method is a promising method in solving potential-flow problems. The underlying procedure of the HPC method could also be useful in other fields than marine hydrodynamics involved with solving Laplace equation.« less

Por Que Rosa No Es Valiente? Cuarto Modulo de una Serie para Maestros de Escuela Elemental (Why Isn't Rosie Brave? Fourth Module of a Series for Elementary School Teachers).

ERIC Educational Resources Information Center

Molina, Carmen Eneida, Ed.; And Others

This guide in English and Spanish provides teachers with methods for identifying textbook bias and stereotyping. A pre-test and post-test designed to measure awareness of textbook stereotypes are included. Four object lessons discuss the function of repetition, cumulative effect, omission, and distortion in reinforcing stereotypes, especially…

Defense AT&L. Volume 40, Number 5, September-October 2011

DTIC Science & Technology

2011-10-01

training, the path to better buying power, and the keys to career success . 9 Systems Engineering: the Affordability Secret Weapon Mike Holbert A...Enabler A Critical Fourth Element of Acquisition Success Across the System Life Cycle Bill Kobren Program managers and their colleagues must adopt a...acquisition outcomes. The real challenge and ultimate measure of our success is the ability to incorporate these initiatives into the culture of our

KENNEDY SPACE CENTER, FLA. - NASA's Space Infrared Telescope Facility (SIRTF) lifts off from Launch Pad 17-B, Cape Canaveral Air Force Station, on Aug. 25 at 1:35:39 a.m. EDT. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

NASA Image and Video Library

2003-08-25

KENNEDY SPACE CENTER, FLA. - NASA's Space Infrared Telescope Facility (SIRTF) lifts off from Launch Pad 17-B, Cape Canaveral Air Force Station, on Aug. 25 at 1:35:39 a.m. EDT. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, the Space Infrared Telescope Facility (SIRTF) waits for encapsulation. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

NASA Image and Video Library

2003-08-14

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, the Space Infrared Telescope Facility (SIRTF) waits for encapsulation. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

Probabilistic Structural Analysis Methods (PSAM) for select space propulsion system components

NASA Technical Reports Server (NTRS)

1991-01-01

The fourth year of technical developments on the Numerical Evaluation of Stochastic Structures Under Stress (NESSUS) system for Probabilistic Structural Analysis Methods is summarized. The effort focused on the continued expansion of the Probabilistic Finite Element Method (PFEM) code, the implementation of the Probabilistic Boundary Element Method (PBEM), and the implementation of the Probabilistic Approximate Methods (PAppM) code. The principal focus for the PFEM code is the addition of a multilevel structural dynamics capability. The strategy includes probabilistic loads, treatment of material, geometry uncertainty, and full probabilistic variables. Enhancements are included for the Fast Probability Integration (FPI) algorithms and the addition of Monte Carlo simulation as an alternate. Work on the expert system and boundary element developments continues. The enhanced capability in the computer codes is validated by applications to a turbine blade and to an oxidizer duct.

Nuclear Thermal Propulsion (NTP): A Proven, Growth Technology for Fast Transit Human Missions to Mars

NASA Technical Reports Server (NTRS)

Borowski, Stanley K.; McCurdy, David R.; Packard, Thomas W.

2014-01-01

The "fast conjunction" long surface stay mission option was selected for NASA's recent Mars Design Reference Architecture (DRA) 5.0 study because it provided adequate time at Mars (approx. 540 days) for the crew to explore the planet's geological diversity while also reducing the "1-way" transit times to and from Mars to approx. 6 months. Short transit times are desirable in order to reduce the debilitating physiological effects on the human body that can result from prolonged exposure to the zero-gravity (0-gE) and radiation environments of space. Recent measurements from the RAD detector attached to the Curiosity rover indicate that astronauts would receive a radiation dose of approx. 0.66 Sv (approx. 66 rem)-the limiting value established by NASA-during their 1-year journey in deep space. Proven nuclear thermal rocket (NTR) technology, with its high thrust and high specific impulse (Isp approx. 900 s), can cut 1-way transit times by as much as 50 percent by increasing the propellant capacity of the Mars transfer vehicle (MTV). No large technology scale-ups in engine size are required for these short transit missions either since the smallest engine tested during the Rover program-the 25 klbf "Pewee" engine is sufficient when used in a clustered arrangement of three to four engines. The "Copernicus" crewed MTV developed for DRA 5.0 is a 0-gE design consisting of three basic components: (1) the NTP stage (NTPS); (2) the crewed payload element; and (3) an integrated "saddle truss" and LH2 propellant drop tank assembly that connects the two elements. With a propellant capacity of approx. 190 t, Copernicus can support 1-way transit times ranging from approx. 150 to 220 days over the 15-year synodic cycle. The paper examines the impact on vehicle design of decreasing transit times for the 2033 mission opportunity. With a fourth "upgraded" SLS/HLV launch, an "in-line" LH2 tank element can be added to Copernicus allowing 1-way transit times of 130 days. To achieve 100 to 120 day transit times, Copernicus' saddle truss/drop tank assembly is replaced by a "star truss" assembly with paired modular drop tanks to further increase the vehicle's propellant capacity. The HLV launch count increases (from approx. 5 to 7) and a fourth engine is needed to reduce total mission burn time and gravity losses. Using a "split mission" approach, the NTPS, in-line tank and the saddle truss/LH2 drop tank elements can be configured as a pre-deployed Earth Return Vehicle/propellant tanker supporting 90-day crewed mission transits. The split mission approach also eliminates the need for on-orbit assembly. Mission scenario descriptions, key features and operational characteristics for five different vehicle configurations are presented.

Meet the Mealworms

ERIC Educational Resources Information Center

Staller, Teena

2005-01-01

Engaging fourth-grade students in hands-on science was easy when a container of mealworms arrived the second week of school. The author's naturally curious students immediately began asking questions, and soon they were eagerly investigating animal characteristics and behavior. But, the journey did not stop there. After students tested mealworms…

San Francisco Bay Area 1990 Regional Travel Characteristics, Working Paper #4: 1990 MTC Travel Survey

DOT National Transportation Integrated Search

1994-12-01

This working paper is the fourth in a series to document analysis and results : from the 1990 MTC household travel survey. Previous working papers on the 1990 : travel survey covered survey design issues, sample weighting and expansion, and : trip li...

The CTD Reading Study.

ERIC Educational Resources Information Center

Kadar-Fulop, Judit

1985-01-01

Reading ability of fourth- and eighth-grade Hungarians was assessed as part of the national CTD-80 (Curriculum Theory Department) survey. The texts used in the reading tests are analyzed, as are the reading tasks involved. Resulting achievement test results are presented and described in terms of the text characteristics. (GDC)

Melorheostosis of the hand with complicating bony spur formation and bursal inflammation: diagnosis and treatment.

PubMed

Ameen, S; Nagy, L; Gerich, U; Anderson, S E

2002-08-01

A 37-year old woman presented with intolerable pain associated with a slowly growing mass on the dorsum of the right hand. The radiographs were characteristic of melorheostosis involving the third and fourth metacarpals, with a cortical bony projection extending from the base of the third metacarpal eroding slightly into the fourth metacarpal, associated with bursal formation. Magnetic resonance imaging (MRI) demonstrated an inflamed bursal collection adjacent to the spur. This region corresponded to the patient's severe clinical, focal pain. To our knowledge, this is the first case report in which melorheostosis of the hand has been associated with bony spur formation and complicated by an inflamed bursa.

Editorial

NASA Astrophysics Data System (ADS)

Rudolph, Dirk; Elding, Lars-Ivar; Fahlander, Claes; Åberg, Sven

2016-12-01

Science often develops most vigorously through challenging studies of extreme phenomena. Superheavy elements fall into such a category. What is the heaviest element that can exist in Nature? Driven by the continued search for an anticipated "island of stability" of superheavy atomic nuclei and the understanding of their underlying nuclear (in)stability and atomic structure hence chemical properties, the past decades have seen a tremendous progress in experimental ingenuity and theoretical methodology to study and characterize superheavy elements. Therefore, we are very grateful that the Nobel Foundation [1] approved and, jointly with the Knut and Alice Wallenberg Foundation [2], provided the financial resources to organize and conduct the Nobel Symposium NS160, entitled Chemistry and Physics of Heavy and Superheavy Elements. These symposia "are devoted to areas of science where breakthroughs are occurring or deal with other topics of primary cultural or social significance" [1]. About three symposia are held each year, roughly every fourth symposium promotes a topic in physics as primary research area, and from about every third symposium a contemporary Nobel Price is being awarded.

Hispanics in Transition.

ERIC Educational Resources Information Center

Arizona State Dept. of Economic Security, Phoenix.

This report analyzes economic and demographic characteristics of Arizona's Hispanic population. In 1980 Arizona ranked fourth among the states in Hispanic concentration (16.2%) and eighth in total number of Hispanics. More than 45% of Arizona's Hispanics lived in Maricopa County. Almost 90% had their ancestral origins in Mexico, but 82% were born…

Exploratory Study on the Stability Characteristics of Commercial Human Keratinocytes

DTIC Science & Technology

1990-04-01

Invest. Dermatol. 75:176- 182; 1980. 16. Hayflick , L. The limited in vitro lifetime of huiran diploid strains. Exp. Cell Res. 37:614-636; 1965. 17...culture keratinocytes were considered by some investigators to have limited proliferative potential, so they used third and fourth passage commercial

An Investigation of Expertise: Implications for Adult Educators.

ERIC Educational Resources Information Center

Mandernach, Janice B.

To examine the characteristics of expertise, a study at the University of Minnesota cardiac clinic compared differences in diagnostic ability and strategies between novices (fourth year medical students) and experts (specialists in pediatric cardiology). The investigator presented a model for expertise based on knowledge of subject matter content…

A Memento of Complexity: The Rhetorics of Memory, Ambience, and Emergence

ERIC Educational Resources Information Center

Southergill, Glen T.

2014-01-01

Drawing from complexity theory, this dissertation develops a schema of rhetorical memory that exhibits extended characteristics. Scholars traditionally conceptualize memory, the fourth canon in classical rhetoric, as place (loci) or image (phantasm). However, memory rhetoric resists the traditional loci-phantasm framework and instead emerges from…

Rescue Manual. Module 4.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Instructional Materials Lab.

This learner manual for rescuers covers the current techniques or practices required in the rescue service. The fourth of 10 modules contains 8 chapters: (1) construction and characteristics of rescue rope; (2) knots, bends, and hitches; (3) critical angles; (4) raising systems; (5) rigging; (6) using the brake-bar rack for rope rescue; (7) rope…

Examination of the New Tech Model as a Holistic Democracy

ERIC Educational Resources Information Center

Bradley-Levine, Jill; Mosier, Gina

2017-01-01

Using the Degrees of Democracy Framework (Woods & Woods, 2012), we examined eight New Tech (NT) high schools to determine the extent to which they demonstrated characteristics of holistic democracy. We collected qualitative data, including observations and interviews during the fourth year of implementation. Findings indicated that the eight…

75 FR 23105 - Medicare Program; Inpatient Psychiatric Facilities Prospective Payment System Payment-Update for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... Disorders Fourth Edition--Text Revision. DRGs Diagnosis-related groups. FY Federal fiscal year. ICD-9-CM...) coding and diagnosis-related groups (DRGs) classification changes discussed in the annual update to the... for the following patient-level characteristics: Medicare Severity diagnosis related groups (MS-DRGs...

The Leap into 4th Grade

ERIC Educational Resources Information Center

Anderson, Mike

2011-01-01

Fourth grade is a pivotal year, in which students commonly face increased academic demands. According to Anderson, teachers can help students make a smooth transition to 4th grade by introducing these new challenges in ways that are in line with 4th graders' common developmental characteristics: incredible energy and emotion, industriousness and…

Defense Acquisitions. Missile Defense Agency Fields Initial Capability but Falls Short of Original Goals

DTIC Science & Technology

2006-03-01

Implementation Plan MAP Missile Defense System Assurance Provisions MDA Missile Defense System NASA National Aeronautics and Space Administration NFIRE ...fourth element, KEI, also delayed some activities related to its Near Field Infrared Experiment ( NFIRE ), which is being conducted to gather data on the...to complete a number of tasks that would have enabled it to conduct the NFIRE experiment. The experiment places sensors aboard a satellite that

Trace elements geochemistry of fractured basement aquifer in southern Malawi: A case of Blantyre rural

NASA Astrophysics Data System (ADS)

Mapoma, Harold Wilson Tumwitike; Xie, Xianjun; Nyirenda, Mathews Tananga; Zhang, Liping; Kaonga, Chikumbusko Chiziwa; Mbewe, Rex

2017-07-01

In this study, twenty one (21) trace elements in the basement complex groundwater of Blantyre district, Malawi were analyzed. The majority of the analyzed trace elements in the water were within the standards set by World Health Organization (WHO) and Malawi Standards Board (MSB). But, iron (Fe) (BH16 and 21), manganese (Mn) (BH01) and selenium (Se) (BH02, 13, 18, 19 and 20) were higher than the WHO and MSB standards. Factor analysis (FA) revealed up to five significant factors which accounted for 87.4% of the variance. Factor 1, 2 and 3 suggest evaporite dissolution and silicate weathering processes while the fourth factor may explain carbonate dissolution and pH influence on trace element geochemistry of the studied groundwater samples. According to PHREEQC computed saturation indices, dissolution, precipitation and rock-water-interaction control the levels of trace elements in this aquifer. Elevated concentrations of Fe, Mn and Se in certain boreholes are due to the geology of the aquifer and probable redox status of groundwater. From PHREEQC speciation results, variations in trace element species were observed. Based on this study, boreholes need constant monitoring and assessment for human consumption to avoid health related issues.

Improved, low cost inorganic-organic separators for rechargeable silver-zinc batteries

NASA Technical Reports Server (NTRS)

Sheibley, D. W.

1979-01-01

Several flexible, low-cost inorganic-organic separators with performance characteristics and cycle life equal to, or better than, the Lewis Research Center Astropower separator were developed. These new separators can be made on continuous-production equipment at about one-fourth the cost of the Astropower separator produced the same way. In test cells, these new separators demonstrate cycle life improvement, acceptable operating characteristics, and uniform current density. The various separator formulas, test cell construction, and data analysis are described.

40 CFR 268.34 - Waste specific prohibitions-toxicity characteristic metal wastes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... characteristic wastes from elemental phosphorus processing; radioactive wastes mixed with EPA Hazardous wastes... identified characteristic wastes from elemental phosphorus processing, radioactive waste mixed with D004-D011...

40 CFR 268.34 - Waste specific prohibitions-toxicity characteristic metal wastes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... characteristic wastes from elemental phosphorus processing; radioactive wastes mixed with EPA Hazardous wastes... identified characteristic wastes from elemental phosphorus processing, radioactive waste mixed with D004-D011...

Gas pipe explorer robot

NASA Technical Reports Server (NTRS)

Wilcox, Brian (Inventor)

2004-01-01

A gas pipe explorer formed of a plurality of connecting elements, and an articulation element between the connected elements. The connected elements include drive capabilities, and the articulation element allows the connected elements to traverse gas pipes of arbitrary shapes and sizes. A sensor may sends the characteristics of the gas pipe, and the communication element may send back those sends characteristics. The communication can be wired, over a tether connecting the device to a remote end. Alternatively, the connection can be wireless, driven by either a generator or a battery.

Students' perceptions of effective learning experiences in dental school: a qualitative study using a critical incident technique.

PubMed

Victoroff, Kristin Zakariasen; Hogan, Sarah

2006-02-01

Students' views of their educational experience can be an important source of information for curriculum assessment. Although quantitative methods, particularly surveys, are frequently used to gather such data, fewer studies have employed qualitative methods to examine students' dental education experiences. The purpose of this study is to explore characteristics of effective learning experiences in dental school using a qualitative method. All third-year (seventy) and fourth-year (seventy) dental students enrolled in one midwestern dental school were invited to participate. Fifty-three dental students (thirty-five male and eighteen female; thirty-two third-year and twenty-one fourth-year) were interviewed using a critical incident interview technique. Each student was asked to describe a specific, particularly effective learning incident that he or she had experienced in dental school and a specific, particularly ineffective learning incident, for comparison. Each interview was audiotaped. Students were assured that only the interviewer and one additional researcher would have access to the tapes. Data analysis resulted in identification of key themes in the data describing characteristics of effective learning experiences. The following characteristics of effective learning experiences were identified: 1) instructor characteristics (personal qualities, "checking-in" with students, and an interactive style); 2) characteristics of the learning process (focus on the "big picture," modeling and demonstrations, opportunities to apply new knowledge, high-quality feedback, focus, specificity and relevance, and peer interactions); and 3) learning environment (culture of the learning environment, technology). Common themes emerged across a wide variety of learning incidents. Although additional research is needed, the characteristics of effective learning experiences identified in this study may have implications for individual course design and for the dental school curriculum as a whole.

Analysis and Design of High-Order Parallel Resonant Converters

NASA Astrophysics Data System (ADS)

Batarseh, Issa Eid

1990-01-01

In this thesis, a special state variable transformation technique has been derived for the analysis of high order dc-to-dc resonant converters. Converters comprised of high order resonant tanks have the advantage of utilizing the parasitic elements by making them part of the resonant tank. A new set of state variables is defined in order to make use of two-dimensional state-plane diagrams in the analysis of high order converters. Such a method has been successfully used for the analysis of the conventional Parallel Resonant Converters (PRC). Consequently, two -dimensional state-plane diagrams are used to analyze the steady state response for third and fourth order PRC's when these converters are operated in the continuous conduction mode. Based on this analysis, a set of control characteristic curves for the LCC-, LLC- and LLCC-type PRC are presented from which various converter design parameters are obtained. Various design curves for component value selections and device ratings are given. This analysis of high order resonant converters shows that the addition of the reactive components to the resonant tank results in converters with better performance characteristics when compared with the conventional second order PRC. Complete design procedure along with design examples for 2nd, 3rd and 4th order converters are presented. Practical power supply units, normally used for computer applications, were built and tested by using the LCC-, LLC- and LLCC-type commutation schemes. In addition, computer simulation results are presented for these converters in order to verify the theoretical results.

Fast and accurate predictions of covalent bonds in chemical space.

PubMed

Chang, K Y Samuel; Fias, Stijn; Ramakrishnan, Raghunathan; von Lilienfeld, O Anatole

2016-05-07

We assess the predictive accuracy of perturbation theory based estimates of changes in covalent bonding due to linear alchemical interpolations among molecules. We have investigated σ bonding to hydrogen, as well as σ and π bonding between main-group elements, occurring in small sets of iso-valence-electronic molecules with elements drawn from second to fourth rows in the p-block of the periodic table. Numerical evidence suggests that first order Taylor expansions of covalent bonding potentials can achieve high accuracy if (i) the alchemical interpolation is vertical (fixed geometry), (ii) it involves elements from the third and fourth rows of the periodic table, and (iii) an optimal reference geometry is used. This leads to near linear changes in the bonding potential, resulting in analytical predictions with chemical accuracy (∼1 kcal/mol). Second order estimates deteriorate the prediction. If initial and final molecules differ not only in composition but also in geometry, all estimates become substantially worse, with second order being slightly more accurate than first order. The independent particle approximation based second order perturbation theory performs poorly when compared to the coupled perturbed or finite difference approach. Taylor series expansions up to fourth order of the potential energy curve of highly symmetric systems indicate a finite radius of convergence, as illustrated for the alchemical stretching of H2 (+). Results are presented for (i) covalent bonds to hydrogen in 12 molecules with 8 valence electrons (CH4, NH3, H2O, HF, SiH4, PH3, H2S, HCl, GeH4, AsH3, H2Se, HBr); (ii) main-group single bonds in 9 molecules with 14 valence electrons (CH3F, CH3Cl, CH3Br, SiH3F, SiH3Cl, SiH3Br, GeH3F, GeH3Cl, GeH3Br); (iii) main-group double bonds in 9 molecules with 12 valence electrons (CH2O, CH2S, CH2Se, SiH2O, SiH2S, SiH2Se, GeH2O, GeH2S, GeH2Se); (iv) main-group triple bonds in 9 molecules with 10 valence electrons (HCN, HCP, HCAs, HSiN, HSiP, HSiAs, HGeN, HGeP, HGeAs); and (v) H2 (+) single bond with 1 electron.

The central element of the synaptonemal complex in mice is organized as a bilayered junction structure.

PubMed

Hernández-Hernández, Abrahan; Masich, Sergej; Fukuda, Tomoyuki; Kouznetsova, Anna; Sandin, Sara; Daneholt, Bertil; Höög, Christer

2016-06-01

The synaptonemal complex transiently stabilizes pairing interactions between homologous chromosomes during meiosis. Assembly of the synaptonemal complex is mediated through integration of opposing transverse filaments into a central element, a process that is poorly understood. We have, here, analyzed the localization of the transverse filament protein SYCP1 and the central element proteins SYCE1, SYCE2 and SYCE3 within the central region of the synaptonemal complex in mouse spermatocytes using immunoelectron microscopy. Distribution of immuno-gold particles in a lateral view of the synaptonemal complex, supported by protein interaction data, suggest that the N-terminal region of SYCP1 and SYCE3 form a joint bilayered central structure, and that SYCE1 and SYCE2 localize in between the two layers. We find that disruption of SYCE2 and TEX12 (a fourth central element protein) localization to the central element abolishes central alignment of the N-terminal region of SYCP1. Thus, our results show that all four central element proteins, in an interdependent manner, contribute to stabilization of opposing N-terminal regions of SYCP1, forming a bilayered transverse-filament-central-element junction structure that promotes synaptonemal complex formation and synapsis. © 2016. Published by The Company of Biologists Ltd.

A Validated Open-Source Multisolver Fourth-Generation Composite Femur Model.

PubMed

MacLeod, Alisdair R; Rose, Hannah; Gill, Harinderjit S

2016-12-01

Synthetic biomechanical test specimens are frequently used for preclinical evaluation of implant performance, often in combination with numerical modeling, such as finite-element (FE) analysis. Commercial and freely available FE packages are widely used with three FE packages in particular gaining popularity: abaqus (Dassault Systèmes, Johnston, RI), ansys (ANSYS, Inc., Canonsburg, PA), and febio (University of Utah, Salt Lake City, UT). To the best of our knowledge, no study has yet made a comparison of these three commonly used solvers. Additionally, despite the femur being the most extensively studied bone in the body, no freely available validated model exists. The primary aim of the study was primarily to conduct a comparison of mesh convergence and strain prediction between the three solvers (abaqus, ansys, and febio) and to provide validated open-source models of a fourth-generation composite femur for use with all the three FE packages. Second, we evaluated the geometric variability around the femoral neck region of the composite femurs. Experimental testing was conducted using fourth-generation Sawbones® composite femurs instrumented with strain gauges at four locations. A generic FE model and four specimen-specific FE models were created from CT scans. The study found that the three solvers produced excellent agreement, with strain predictions being within an average of 3.0% for all the solvers (r2 > 0.99) and 1.4% for the two commercial codes. The average of the root mean squared error against the experimental results was 134.5% (r2 = 0.29) for the generic model and 13.8% (r2 = 0.96) for the specimen-specific models. It was found that composite femurs had variations in cortical thickness around the neck of the femur of up to 48.4%. For the first time, an experimentally validated, finite-element model of the femur is presented for use in three solvers. This model is freely available online along with all the supporting validation data.

Technology and Learning: Changing Minds in a Changing World. Schooling and Technology, Volume 4.

ERIC Educational Resources Information Center

Willis, Bernice H.; And Others

This document, the publishers' fourth volume on schooling and technology, explores in detail the mismatch between the historically developed purposes, roles, and practices of the schools and the nature of the new technology. Specifically, it juxtaposes characteristics of today's children and the currently available educational technologies…

A Study of Certain Categories of Social Attitudes of Fourth, Fifth, and Sixth Grade Pupils.

ERIC Educational Resources Information Center

Zodikoff, David H.

The study was designed to discover relationships between certain backgrounds and characteristics of children, and some of the attitudes that are considered vital in a democracy, e.g. those concerning democratic living, group interdependence, empathy, independent thinking and social responsibility. The major variables included: (1) grade or class…

The Culture Course in the Undergraduate Russian Program.

ERIC Educational Resources Information Center

Holliday, Gilbert

1983-01-01

The design and content of a required, fourth-year course in Soviet culture are proposed. The course has three distinguishing characteristics: basis in a broader, social sciences definition of culture; the Soviet Union as a frame of reference; and instruction in Russian. Its objectives are both cultural knowledge and language proficiency. (MSE)

Beyond Decoding Deficit: Inhibitory Effect of Positional Syllable Frequency in Dyslexic Spanish Children

ERIC Educational Resources Information Center

Luque, Juan L.; López-Zamora, Miguel; Álvarez, Carlos J.; Bordoy, Soraya

2013-01-01

This study explores whether activation and inhibition word processes contribute to the characteristic speed deficits found in transparent orthographies (Wimmer, "Appl Psycholinguist" 14:1-33, 1993). A second and fourth grade sample of normal school readers and dyslexic school readers participated in a lexical decision task. Words were…

Sensitivity of Students to the Natural Environment, Animals, Social Problems and Cultural Heritage

ERIC Educational Resources Information Center

Kurtdede Fidan, Nuray

2016-01-01

The study aims to determine the sensitivity levels of fourth-grade students to the natural environment, animals, social concerns and cultural heritage. Besides, it has been investigated whether some personal characteristics of the students have differentiating effect on the views related to the sensitivity to the natural environment, animals,…

Annehurst Curriculum Classification System Variables as Dimensions of Aptitude Treatment Interactions.

ERIC Educational Resources Information Center

Clark, Ginny; Grady, M. Tim

The objective of this study was to determine if the Annehurst Curriculum Classification System (ACCS) learner characteristics and curriculum materials classifications among elementary mathematics students, can be used as the dimensions of an aptitude-treatment interaction analysis. The subjects were 34 fourth and fifth graders in three open-space…

An X-Ray of Inter-Governmental Relation Conflicts and Resource Control in the Fourth Republic in Nigeria

ERIC Educational Resources Information Center

Ojo, John Sunday

2014-01-01

Intergovernmental relation is a necessary political tool for mutual intertwines among the levels of government for the realization and facilitation of government goals and objectives. Intergovernmental wrangling has been a morphological characteristic of Nigerian federalism. The 1999 Nigerian constitution stipulates unequivocal and unambiguous…

America's Children: Key National Indicators of Well-Being, 2000.

ERIC Educational Resources Information Center

Benson, Carole, Ed.

This report is the fourth to present nationwide data on the well-being of America's children. The statistical portrait is based on indicators of child well-being such as family income and mortality rates. Part 1 of the report, "Population and Family Characteristics," presents information illustrating the changes that have occurred during…

Seeing Eye to Eye: Predicting Teacher-Student Agreement on Classroom Social Networks

ERIC Educational Resources Information Center

Neal, Jennifer Watling; Cappella, Elise; Wagner, Caroline; Atkins, Marc S.

2011-01-01

This study examines the association between classroom characteristics and teacher-student agreement in perceptions of students' classroom peer networks. Social network, peer nomination, and observational data were collected from a sample of second through fourth grade teachers (N = 33) and students (N = 669) in 33 classrooms across five…

Sibling Relationships: An Unrealized Potential Support for the Elderly.

ERIC Educational Resources Information Center

Avioli, Paula Smith

Although it has been estimated that over three-fourths of all older adults have living siblings, little information is available on the actual and potential supportive role siblings play for older persons. The sibling relationship has several unique and interesting characteristics and the intimate experiences of childhood may either bind or…

Student Technological Creativity Using Online Problem-Solving Activities

ERIC Educational Resources Information Center

Chang, Yu-Shan

2013-01-01

The purpose of this study was to investigate the effects of online (web-based) creative problem-solving (CPS) activities on student technological creativity and to examine the characteristics of student creativity in the context of online CPS. A pretest-posttest quasi-experiment was conducted with 107 fourth-grade students in Taiwan. The…

Urban Teacher Persistence: Self-Efficacy, Affect, and Values

ERIC Educational Resources Information Center

Ige, Elaine Anita

2012-01-01

The problem of teacher attrition was reviewed and a mixed-method study of motivational characteristics for years of persistence in a teaching career was conducted. Ninety-two second, third, or fourth grade urban public school teachers who taught for five years or more were surveyed in order to gather quantitative data on the five motivational…

Effects of Game-Based Learning in an Opensim-Supported Virtual Environment on Mathematical Performance

ERIC Educational Resources Information Center

Kim, Heesung; Ke, Fengfeng

2017-01-01

This experimental study was intended to examine whether the integration of game characteristics in the OpenSimulator-supported virtual reality (VR) learning environment can improve mathematical achievement for elementary school students. In this pre- and posttest experimental comparison study, data were collected from 132 fourth graders through an…

Photoluminescence Characteristics of Yag:Ce, Gd Based Phosphors with Different Prehistories

NASA Astrophysics Data System (ADS)

Lisitsyn, V. M.; Soshchin, N. P.; Yang yang, Yu; Stepanov, S. A.; Lisitsyna, L. A.; Tulegenova, A. T.; Abdullin, Kh. A.

2017-09-01

Luminescence characteristics of yttrium-aluminum garnet based phosphor samples differed by their elemental composition and prehistory of synthesis are studied. The morphology, structure, and elemental composition of phosphor samples, their excitation and emission spectra, efficiency of phosphor conversion of chip emission, and kinetics of luminescence decay are measured. The emission characteristics of phosphors are compared with their structural properties and elemental composition.

Improved Modeling of Structural Joint Damping

DTIC Science & Technology

1986-12-01

fourth order beam equation. Griffel has tabulated the results for a number of beam loading geometries and, as seen in Figure 2-11, has plotted the shear... Griffel . Having the solution to the built-in beam symmetric case we can now move on to the development of the Boundary Element theory. 2.3 indirect...December 1985. 9. Greenwood, D. T., Principle? &t PY"affllC3/ New Jersey, Prentice-Hall, Inc., 1965. 10. Griffel , William, Beam Formulas. New York

Spectral resolution of SU(3)-invariant solutions of the Yang-Baxter equation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alishauskas, S.I.; Kulish, P.P.

1986-11-20

The spectral resolution of invariant R-matrices is computed on the basis of solution of the defining equation. Multiple representations in the Clebsch-Gordon series are considered by means of the classifying operator A: a linear combination of known operators of third and fourth degrees in the group generators. The matrix elements of A in a nonorthonormal basis are found. Explicit expressions are presented for the spectral resolutions for a number of representations.

Spectral resolution of SU(3)-invariant solutions of the Yang-Baxter equation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alishavskas, S.I.; Kulish, P.P.

1986-11-01

The spectral resolution of invariant R-matrices is computed on the basis of solution of the defining equation. Multiple representations in the Clebsch-Gordon series are considered by means of the classifying operator A: a linear combination of known operators of third and fourth degrees in the group generators. The matrix elements of A in a nonorthonormal basis are found. Explicit expressions are presented for the spectral resolutions for a number of representations.

Job Corps Oversight Part II: Vocational Training Standards. Hearing before the Subcommittee on Human Resources of the Committee on Government Reform and Oversight, House of Representatives, One Hundred Fifth Congress, Second Session (July 29, 1998).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Government Reform and Oversight.

This congressional hearing continues the House's oversight of the Department of Labor's (DOL's) Job Corps program, focusing on the fourth element of successful job training, maintaining a vocational curriculum that reflects current and future job opportunities. It reviews findings of a General Accounting Office (GAO) study that found the program…

Geologic and geophysical maps of the eastern three-fourths of the Cambria 30' x 60' quadrangle, central California Coast Ranges

USGS Publications Warehouse

Graymer, R.W.; Langenheim, V.E.; Roberts, M.A.; McDougall, Kristin

2014-01-01

The Cambria 30´ x 60´ quadrangle comprises southwestern Monterey County and northwestern San Luis Obispo County. The land area includes rugged mountains of the Santa Lucia Range extending from the northwest to the southeast part of the map; the southern part of the Big Sur coast in the northwest; broad marine terraces along the southwest coast; and broadvalleys, rolling hills, and modest mountains in the northeast. This report contains geologic, gravity anomaly, and aeromagnetic anomaly maps of the eastern three-fourths of the 1:100,000-scale Cambria quadrangle and the associated geologic and geophysical databases (ArcMap databases), as well as complete descriptions of the geologic map units and the structural relations in the mapped area. A cross section is based on both the geologic map and potential-field geophysical data. The maps are presented as an interactive, multilayer PDF, rather than more traditional pre-formatted map-sheet PDFs. Various geologic, geophysical, paleontological, and base map elements are placed on separate layers, which allows the user to combine elements interactively to create map views beyond the traditional map sheets. Four traditional map sheets (geologic map, gravity map, aeromagnetic map, paleontological locality map) are easily compiled by choosing the associated data layers or by choosing the desired map under Bookmarks.

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, workers move the first half of the fairing around the Space Infrared Telescope Facility (SIRTF) behind it for encapsulation. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

NASA Image and Video Library

2003-08-14

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, workers move the first half of the fairing around the Space Infrared Telescope Facility (SIRTF) behind it for encapsulation. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, the top of the fairing is seen as it moves into place around the Space Infrared Telescope Facility (SIRTF). SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

NASA Image and Video Library

2003-08-14

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, the top of the fairing is seen as it moves into place around the Space Infrared Telescope Facility (SIRTF). SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, the first half of the fairing is moved around the Space Infrared Telescope Facility (SIRTF). SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

NASA Image and Video Library

2003-08-14

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, the first half of the fairing is moved around the Space Infrared Telescope Facility (SIRTF). SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, the first half of the fairing (background) moves toward the Space Infrared Telescope Facility (foreground) for encapsulation. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

NASA Image and Video Library

2003-08-14

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, the first half of the fairing (background) moves toward the Space Infrared Telescope Facility (foreground) for encapsulation. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, workers watch as the first half of the fairing moves closer around the Space Infrared Telescope Facility (SIRTF). SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

NASA Image and Video Library

2003-08-14

KENNEDY SPACE CENTER, FLA. - In the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, workers watch as the first half of the fairing moves closer around the Space Infrared Telescope Facility (SIRTF). SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

KENNEDY SPACE CENTER, FLA. - Before dawn, the Space Infrared Telescope Facility (SIRTF) arrives at Launch Pad 17-B, Cape Canaveral Air Force Station, where it will be lifted into the mobile service tower and prepared for launch. SIRTF consists of three cryogenically cooled science instruments and an 0.85-meter telescope, and is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - Before dawn, the Space Infrared Telescope Facility (SIRTF) arrives at Launch Pad 17-B, Cape Canaveral Air Force Station, where it will be lifted into the mobile service tower and prepared for launch. SIRTF consists of three cryogenically cooled science instruments and an 0.85-meter telescope, and is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

KENNEDY SPACE CENTER, FLA. - After dawn, the Space Infrared Telescope Facility (SIRTF) is lifted up the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - After dawn, the Space Infrared Telescope Facility (SIRTF) is lifted up the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

Nucleation of the diamond phase in aluminium-solid solutions

NASA Technical Reports Server (NTRS)

Hornbogen, E.; Mukhopadhyay, A. K.; Starke, E. A., Jr.

1993-01-01

Precipitation was studied from fcc solid solutions with silicon, germanium, copper and magnesium. Of all these elements only silicon and germanium form diamond cubic (DC) precipitates in fcc Al. Nucleation of the DC structure is enhanced if both types of atom are dissolved in the fcc lattice. This is interpreted as due to atomic size effects in the prenucleation stage. There are two modes of interference of fourth elements with nucleation of the DC phase in Al + Si, Ge. The formation of the DC phase is hardly affected if the atoms (for example, copper) are rejected from the (Si, Ge)-rich clusters. If additional types of atom are attracted by silicon and/or germanium, DC nuclei are replaced by intermetallic compounds (for example Mg2Si).

For money or service?: a cross-sectional survey of preference for financial versus non-financial rural practice characteristics among Ghanaian medical students.

PubMed

Johnson, Jennifer C; Nakua, Emmanuel; Dzodzomenyo, Mawuli; Agyei-Baffour, Peter; Gyakobo, Mawuli; Asabir, Kwesi; Kwansah, Janet; Kotha, S Rani; Snow, Rachel C; Kruk, Margaret E

2011-11-03

Health worker shortage and maldistribution are among the biggest threats to health systems in Africa. New medical graduates are prime targets for recruitment to deprived rural areas. However, little research has been done to determine the influence of workers' background and future plans on their preference for rural practice incentives and characteristics. The purpose of this study was to identify determinants of preference for rural job characteristics among fourth year medical students in Ghana. We asked fourth-year Ghanaian medical students to rank the importance of rural practice attributes including salary, infrastructure, management style, and contract length in considering future jobs. We used bivariate and multivariate ordinal logistic regression to estimate the association between attribute valuation and students' socio-demographic background, educational experience, and future career plans. Of 310 eligible fourth year medical students, complete data was available for 302 students (97%). Students considering emigration ranked salary as more important than students not considering emigration, while students with rural living experience ranked salary as less important than those with no rural experience. Students willing to work in a rural area ranked infrastructure as more important than students who were unwilling, while female students ranked infrastructure as less important than male students. Students who were willing to work in a rural area ranked management style as a more important rural practice attribute than those who were unwilling to work in a rural area. Students studying in Kumasi ranked contract length as more important than those in Accra, while international students ranked contract length as less important than Ghanaian students. Interventions to improve rural practice conditions are likely to be more persuasive than salary incentives to Ghanaian medical students who are willing to work in rural environments a priori. Policy experiments should test the impact of these interventions on actual uptake by students upon graduation.

For money or service? a cross-sectional survey of preference for financial versus non-financial rural practice characteristics among ghanaian medical students

PubMed Central

2011-01-01

Background Health worker shortage and maldistribution are among the biggest threats to health systems in Africa. New medical graduates are prime targets for recruitment to deprived rural areas. However, little research has been done to determine the influence of workers' background and future plans on their preference for rural practice incentives and characteristics. The purpose of this study was to identify determinants of preference for rural job characteristics among fourth year medical students in Ghana. Methods We asked fourth-year Ghanaian medical students to rank the importance of rural practice attributes including salary, infrastructure, management style, and contract length in considering future jobs. We used bivariate and multivariate ordinal logistic regression to estimate the association between attribute valuation and students' socio-demographic background, educational experience, and future career plans. Results Of 310 eligible fourth year medical students, complete data was available for 302 students (97%). Students considering emigration ranked salary as more important than students not considering emigration, while students with rural living experience ranked salary as less important than those with no rural experience. Students willing to work in a rural area ranked infrastructure as more important than students who were unwilling, while female students ranked infrastructure as less important than male students. Students who were willing to work in a rural area ranked management style as a more important rural practice attribute than those who were unwilling to work in a rural area. Students studying in Kumasi ranked contract length as more important than those in Accra, while international students ranked contract length as less important than Ghanaian students. Conclusions Interventions to improve rural practice conditions are likely to be more persuasive than salary incentives to Ghanaian medical students who are willing to work in rural environments a priori. Policy experiments should test the impact of these interventions on actual uptake by students upon graduation. PMID:22050704

Performance characteristics of LOX-H2, tangential-entry, swirl-coaxial, rocket injectors

NASA Technical Reports Server (NTRS)

Howell, Doug; Petersen, Eric; Clark, Jim

1993-01-01

Development of a high performing swirl-coaxial injector requires an understanding of fundamental performance characteristics. This paper addresses the findings of studies on cold flow atomic characterizations which provided information on the influence of fluid properties and element operating conditions on the produced droplet sprays. These findings are applied to actual rocket conditions. The performance characteristics of swirl-coaxial injection elements under multi-element hot-fire conditions were obtained by analysis of combustion performance data from three separate test series. The injection elements are described and test results are analyzed using multi-variable linear regression. A direct comparison of test results indicated that reduced fuel injection velocity improved injection element performance through improved propellant mixing.

Fractionated Stereotactic Radiotherapy in the Treatment of Vestibular Schwannoma (Acoustic Neuroma): Predicting the Risk of Hydrocephalus;Vestibular schwannoma; Hydrocephalus; Fractionated; Stereotactic radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, Ceri; Micallef, Caroline; Gonsalves, Adam

2011-07-15

Purpose: To determine the incidence and predictive factors for the development of hydrocephalus in patients with acoustic neuromas (AN) treated with fractionated stereotactic radiotherapy. Patients and Methods: Seventy-two patients with AN were treated with fractionated stereotactic radiotherapy between 1998 and 2007 (45-50 Gy in 25-30 fractions over 5 to 6 weeks). The pretreatment MRI scan was assessed for tumor characteristics and anatomic distortion independently of subsequent outcome and correlated with the risk of hydrocephalus. Results: At a median follow-up of 49 months (range, 1-120 months), 5-year event-free survival was 95%. Eight patients (11%) developed hydrocephalus within 19 months of radiotherapy,more » which was successfully treated. On univariate analysis, pretreatment factors predictive of hydrocephalus were maximum diameter (p = 0.005), proximity to midline (p = 0.009), displacement of the fourth ventricle (p = 0.02), partial effacement of the fourth ventricle (p < 0.001), contact with the medulla (p = 0.005), and more brainstem structures (p = 0.004). On multivariate analysis, after adjusting for fourth ventricular effacement, no other variables remained independently associated with hydrocephalus formation. Conclusions: Fractionated stereotactic radiotherapy results in excellent tumor control of AN, albeit with a risk of developing hydrocephalus. Patients at high risk, identified as those with larger tumors with partial effacement of the fourth ventricle before treatment, should be monitored more closely during follow-up. It would also be preferable to offer treatment to patients with progressive AN while the risk of hydrocephalus is low, before the development of marked distortion of fourth ventricle before tumor diameter significantly exceeds 2 cm.« less

An Alternate Approach to Axiomatizations of the Von Neumann/Morgenstern Characteristic Function.

DTIC Science & Technology

1987-03-01

I ~Nh/N OROENSTERN C.. CU) STANFORD UNIY CA INST FOR I MATHEMTICAL STUDIES IN THE SOCIAL S.. U0CASFEA A LEWIS ET AL. MAR 87 TR-569 F/0 12/3 M 1111...Research NATIONAL SCIENCE FOUNDATION GRANT DMS-84-10456 THE ECONOMICS SERIES INSTITUTE FOR MATHEMATICAL STUDIES IN THE SOCIAL SCIENCES Fourth Floor, Encina...characteristic function of a game - that gives us an intuitive idea of the value of a coalition - is of central importance in the theory of N- person

Infrared circumstellar shells - Origins, and clues to the evolution of massive stars

NASA Technical Reports Server (NTRS)

Stencel, Robert E.; Pesce, Joseph E.; Bauer, Wendy Hagen

1989-01-01

The infrared fluxes, spatial and spectral characteristics for a sample of 111 supergiant stars of spectral types F0 through M5 are tabulated, and correlations examined with respect to the nature of their circumstellar envelopes. One-fourth of these objects were spatialy resolved by IRAS at 60 microns and possess extended circumstellar shell material, with implied expansion ages of about 10 to the 5th yr. Inferences about the production of dust, mass loss, and the relation of these characteristics of the evolution of massive stars, are discussed.

Minimal parameter solution of the orthogonal matrix differential equation

NASA Technical Reports Server (NTRS)

Bar-Itzhack, Itzhack Y.; Markley, F. Landis

1990-01-01

As demonstrated in this work, all orthogonal matrices solve a first order differential equation. The straightforward solution of this equation requires n sup 2 integrations to obtain the element of the nth order matrix. There are, however, only n(n-1)/2 independent parameters which determine an orthogonal matrix. The questions of choosing them, finding their differential equation and expressing the orthogonal matrix in terms of these parameters are considered. Several possibilities which are based on attitude determination in three dimensions are examined. It is shown that not all 3-D methods have useful extensions to higher dimensions. It is also shown why the rate of change of the matrix elements, which are the elements of the angular rate vector in 3-D, are the elements of a tensor of the second rank (dyadic) in spaces other than three dimensional. It is proven that the 3-D Gibbs vector (or Cayley Parameters) are extendable to other dimensions. An algorithm is developed emplying the resulting parameters, which are termed Extended Rodrigues Parameters, and numerical results are presented of the application of the algorithm to a fourth order matrix.

Minimal parameter solution of the orthogonal matrix differential equation

NASA Technical Reports Server (NTRS)

Baritzhack, Itzhack Y.; Markley, F. Landis

1988-01-01

As demonstrated in this work, all orthogonal matrices solve a first order differential equation. The straightforward solution of this equation requires n sup 2 integrations to obtain the element of the nth order matrix. There are, however, only n(n-1)/2 independent parameters which determine an orthogonal matrix. The questions of choosing them, finding their differential equation and expressing the orthogonal matrix in terms of these parameters are considered. Several possibilities which are based on attitude determination in three dimensions are examined. It is shown that not all 3-D methods have useful extensions to higher dimensions. It is also shown why the rate of change of the matrix elements, which are the elements of the angular rate vector in 3-D, are the elements of a tensor of the second rank (dyadic) in spaces other than three dimensional. It is proven that the 3-D Gibbs vector (or Cayley Parameters) are extendable to other dimensions. An algorithm is developed employing the resulting parameters, which are termed Extended Rodrigues Parameters, and numerical results are presented of the application of the algorithm to a fourth order matrix.

Using Art Media during Prewriting: Helping Students with Dysgraphia Manage Idea Generation before Encoding Text

ERIC Educational Resources Information Center

Dunn, Michael

2013-01-01

Many students struggle with writing skills. This study focuses on three students (second and fourth grades) who were classified with a learning disability by their school. These children had writing goals and objectives (i.e., characteristics of having dysgraphia) included in their Individual Education Plan. In a single case design format, each…

Pause Time Patterns in Writing Narrative and Expository Texts by Children and Adults

ERIC Educational Resources Information Center

van Hell, Janet G.; Verhoeven, Ludo; van Beijsterveldt, Liesbeth M.

2008-01-01

How do beginning and skilled writers compose a text in the course of time? To gain insight into the temporal aspects of planning and translating activities during writing, this article examined writing in real time and analyzed pause time patterns in writing in relation to linguistic characteristics of the written product. Fourth-grade children…

Classmate Characteristics and Student Achievement in 33 Countries: Classmates' Past Achievement, Family Socioeconomic Status, Educational Resources, and Attitudes toward Reading

ERIC Educational Resources Information Center

Chiu, Ming Ming; Chow, Bonnie Wing-Yin

2015-01-01

Classmates can influence a student's academic achievement through immediate interactions (e.g., academic help, positive attitudes toward reading) or by sharing tangible or intangible family resources (books, stories of foreign travel). Multilevel analysis of 141,019 fourth-grade students' reading achievements in 33 countries showed that…

Perceptions of the Situation of Families with Children with Learning Disabilities and ADHD

ERIC Educational Resources Information Center

Robledo-Ramón, Patricia; García-Sánchez, Jesús N.

2012-01-01

The goal of this study was to determine if there were any differences in dynamic family variables, home climate, parents' attitudes towards their children and parental involvement in education, in relation to the students' typological characteristics. The sample consisted of 87 families of pupils (fourth year primary-first year secondary). The…

Population Profile of the United States: 1974. Current Population Reports, Series P-20, No. 279.

ERIC Educational Resources Information Center

Glick, Paul C., Ed.

Statistics on population growth, social characteristics, population distribution, employment and income, and ethnic groups are presented in this report. Among the highlights of the report are the following findings: the population grew by three-fourths of one percent during 1974, a slightly higher rate than 1973 but substantially lower than the…

Examining the Effects of School Composition on North Carolina Student Achievement over Time

ERIC Educational Resources Information Center

Southworth, Stephanie

2010-01-01

This study explores the effects of school-level characteristics on North Carolina students' reading and math achievement from fourth through eighth grade, focusing on the relationships between achievement and the racial and poverty composition of schools. After creating race-by-poverty cohorts of schools, I use multilevel models to examine math…

Warmth and Demand: The Relation between Students' Perceptions of The Classroom Environment and Achievement Growth

ERIC Educational Resources Information Center

Sandilos, Lia E.; Rimm-Kaufman, Sara E.; Cohen, Julia Jackson

2017-01-01

Theory suggests that African American students benefit from warm and demanding teachers. This study examines the relation between students' perceptions of 634 teachers' warm demander characteristics and achievement growth in fourth and fifth grades (M[subscript student age] = 9-11.5 years). Analyses explored whether relations were moderated by the…

[Characteristics of heavy metal elements and their relationship with magnetic properties of river sediment from urban area in Lanzhou].

PubMed

Wang, Bo; Zhao, Shuang; Xia, Dun-sheng; Yu, Ye; Tian, Shi-li; Jia, Jia; Jiang, Xiao-rong

2011-05-01

The contents of As, Co, Cr, Cu, Ni, Pb, V and Zn in the surface sediments from 8 rivers in urban area in Lanzhou were monitored by ecological risk which was assessed by the potential ecological Håkanson index, and the index of geoaccumulation (Igeo), sediment enrichment factor (R), and environmental magnetism. The results showed that: (1) the potential ecological risk of heavy metals of As, Co, Ni, V in surface sediments from 8 rivers were low, which belonged to low ecological risk. But the risk of heave metals Cr, Pb, Zn in surface sediments from Yuer river was high, which belonged to middle ecological risk, and in downstream of Yuer river, the element of Cu belonged to high ecological risk. (2) The rivers in Lanzhou could be divided into four groups according to the heavy mental pollution degree: first type, such as Paihong river, Shier river, Yuer river and Shuimo river, called downstream concentrate type; second type, such as Qili river, called upstream concentrate type; third type, such as Luoguo river and Dasha river, called less affected type; fourth type, Lanni river, which polluted heavily in up and downstream; (3) The correlation analysis between magnetic parameters and element contents show that the parameters which mainly reflect the concentration of the magnetic minerals (X, SIRM, Ms) have close association with Cr, Ni, Pb, Zn, Cu, So we can infer that the magnetic minerals in deposits samples mainly came from electroplating effluent, motor vehicle emission, and domestic sewage. SIRM/X shows a strong correlation with Cr, Ni, Pb, Zn, indicating the distribution of anthropogenic particulates. (4) The magnetic minerals(X, SIRM, Ms) have a strong correlation with the geoaccumulation (Igeo) than potential ecological risk index and enrichment factor (R). These results suggest a possible approach for source identification of magnetic material in pollution studies and the validity of using magnetic measurements to mapping the polluted area.

The Impact of Different Visual Feedbacks in User Training on Motor Imagery Control in BCI.

PubMed

Zapała, Dariusz; Francuz, Piotr; Zapała, Ewelina; Kopiś, Natalia; Wierzgała, Piotr; Augustynowicz, Paweł; Majkowski, Andrzej; Kołodziej, Marcin

2018-03-01

The challenges of research into brain-computer interfaces (BCI) include significant individual differences in learning pace and in the effective operation of BCI devices. The use of neurofeedback training is a popular method of improving the effectiveness BCI operation. The purpose of the present study was to determine to what extent it is possible to improve the effectiveness of operation of sensorimotor rhythm-based brain-computer interfaces (SMR-BCI) by supplementing user training with elements modifying the characteristics of visual feedback. Four experimental groups had training designed to reinforce BCI control by: visual feedback in the form of dummy faces expressing emotions (Group 1); flashing the principal elements of visual feedback (Group 2) and giving both visual feedbacks in one condition (Group 3). The fourth group participated in training with no modifications (Group 4). Training consisted of a series of trials where the subjects directed a ball into a basket located to the right or left side of the screen. In Group 1 a schematic image a face, placed on the controlled object, showed various emotions, depending on the accuracy of control. In Group 2, the cue and targets were flashed with different frequency (4 Hz) than the remaining elements visible on the monitor. Both modifications were also used simultaneously in Group 3. SMR activity during the task was recorded before and after the training. In Group 3 there was a significant improvement in SMR control, compared to subjects in Group 2 and 4 (control). Differences between subjects in Groups 1, 2 and 4 (control) were insignificant. This means that relatively small changes in the training procedure may significantly impact the effectiveness of BCI control. Analysis of behavioural data acquired from all participants at training showed greater effectiveness in directing the object towards the right side of the screen. Subjects with the greatest improvement in SMR control showed a significantly lower difference in the accuracy of rightward and leftward movement than others.

Analytical approach to peel stresses in bonded composite stiffened panels

NASA Technical Reports Server (NTRS)

Barkey, Derek A.; Madan, Ram C.; Sutton, Jason O.

1987-01-01

A closed-form solution was obtained for the stresses and displacements of two bonded beams. A system of two fourth-order and two second-order differential equations with the associated boundary equations was determined using a variational work approach. A FORTRAN computer program was devised to solve for the eigenvalues and eigenvectors of this system and to calculate the coefficients from the boundary conditions. The results were then compared with NASTRAN finite-element solutions and shown to agree closely.

STS-117 Media Showcase

NASA Image and Video Library

2007-02-06

In the Space Station Processing Facility, the S3/S4 integrated truss segment is on display for the media. The starboard 3/4 truss segment will launch aboard Space Shuttle Atlantis on mission STS-117, targeted for March 15. The element will be added to the 11-segment integrated truss structure, the station's backbone. The integrated truss structure eventually will span more than 300 feet. The S3/S4 truss has two large solar arrays and will provide one-fourth of the total power generation for the completed station.

Engine dynamic analysis with general nonlinear finite element codes. Part 2: Bearing element implementation overall numerical characteristics and benchmaking

NASA Technical Reports Server (NTRS)

Padovan, J.; Adams, M.; Fertis, J.; Zeid, I.; Lam, P.

1982-01-01

Finite element codes are used in modelling rotor-bearing-stator structure common to the turbine industry. Engine dynamic simulation is used by developing strategies which enable the use of available finite element codes. benchmarking the elements developed are benchmarked by incorporation into a general purpose code (ADINA); the numerical characteristics of finite element type rotor-bearing-stator simulations are evaluated through the use of various types of explicit/implicit numerical integration operators. Improving the overall numerical efficiency of the procedure is improved.

Direct mass limits for chiral fourth-generation quarks in all mixing scenarios.

PubMed

Flacco, Christian J; Whiteson, Daniel; Tait, Tim M P; Bar-Shalom, Shaouly

2010-09-10

Present limits on chiral fourth-generation quark masses mb' and mt' are broadly generalized and strengthened by combining both t' and b' decays and considering a full range of t' and b' flavor-mixing scenarios with the lighter generations (to 1-‖V44‖2≈10(-13)). Various characteristic mass-splitting choices are considered. With mt'>mb' we find that CDF Collaboration limits on the b' mass vary by no more than 10%-20% with any choice of flavor mixing, while for the t' mass, we typically find stronger bounds, in some cases up to mt'>430  GeV. For mb'>mt', we find mb'>380-430  GeV, depending on the flavor mixing and the size of the mt'-mb' mass splitting.

Monte-Carlo gamma response simulation of fast/thermal neutron interactions with soil elements

USDA-ARS?s Scientific Manuscript database

Soil elemental analysis using characteristic gamma rays induced by neutrons is an effective method of in situ soil content determination. The nuclei of soil elements irradiated by neutrons issue characteristic gamma rays due to both inelastic neutron scattering (e.g., Si, C) and thermal neutron capt...

Graduates' characteristics and professional situation: a follow-up of five classes graduated from the Malmö model.

PubMed

Bengmark, Daniel; Nilner, Maria; Rohlin, Madeleine

2007-01-01

This study describes some characteristics of graduates of the five first classes from the Malmö dental programme, their overall experience of the programme, and their professional situation. Of 166 graduates (graduated 1995-1999) who were invited to participate, 128 responded (response rate 77%). The questionnaire queried participant characteristics, undergraduate education, and professional situation. The median age of the respondents at graduation was 26 years (range: 24-43 years, female: 56%). One-fourth of the respondents were born outside Sweden.Two-thirds of the respondents answered that they enrolled in the dental education because they wanted to become a dentist. Most respondents (97%) were working as a dentist, and a majority (82%) worked full-time. The respondents thought their dental education had prepared them well for their profession. About one-third of the respondents worked outside Sweden; the majority had been born outside of Sweden. The respondents' satisfaction with their professional situation, which was high overall, correlated to how much they were able to influence their work situation. About one-fourth expressed interest in specialist training. Respondents differed on the topic of research education: 64% of the female graduates and 42% of the male graduates were interested. We conclude that the respondents were satisfied with their professional situation as a dentist and that most were interested in postgraduate education.

Studies on vibration characteristics of a pear using finite element method*

PubMed Central

Song, Hui-zhi; Wang, Jun; Li, Yong-hui

2006-01-01

The variation of the vibration characteristics of a Huanghua pear was investigated using finite element simulations. A new image processing technique was used to obtain the unsymmetrical and un-spherical geometrical model of a pear. The vibration characteristics of this type of pear with the correlation of its behavior with geometrical configurations and material characteristics were investigated using numerical modal analysis. The results showed that the eigenfrequency increased with the increasing pear Young’s modulus, while decreased with increasing pear density, and decreased with increasing pear volume. The results of this study provided foundation for further investigations of the physical characteristics of fruits and vegetables by using finite element simulations. PMID:16691644

Practical entanglement concentration of nonlocal polarization-spatial hyperentangled states with linear optics

NASA Astrophysics Data System (ADS)

Wang, Zi-Hang; Wu, Xiao-Yuan; Yu, Wen-Xuan; Alzahrani, Faris; Hobiny, Aatef; Deng, Fu-Guo

2017-05-01

We present some different hyperentanglement concentration protocols (hyper-ECPs) for nonlocal N-photon systems in partially polarization-spatial hyperentangled states with known parameters, resorting to linear optical elements only, including those for hyperentangled Greenberger-Horne-Zeilinger-class states and the ones for hyperentangled cluster-class states. Our hyper-ECPs have some interesting features. First, they require only one copy of nonlocal N-photon systems and do not resort to ancillary photons. Second, they work with linear optical elements, neither Bell-state measurement nor two-qubit entangling gates. Third, they have the maximal success probability with only a round of entanglement concentration, not repeating the concentration process some times. Fourth, they resort to some polarizing beam splitters and wave plates, not unbalanced beam splitters, which make them more convenient in experiment.

Barriers to and facilitators of walking and bicycling to school: formative results from the non-motorized travel study.

PubMed

Ahlport, Kathryn N; Linnan, Laura; Vaughn, Amber; Evenson, Kelly R; Ward, Dianne S

2008-04-01

Barriers to and facilitators of walking and bicycling to school were explored through 12 focus groups made up of fourth- and fifth-grade students and their parents who lived near their respective schools. The barriers and facilitators reported by parents and children generally fell into one of three categories: intrapersonal and interpersonal characteristics of parents and children, environmental characteristics of the neighborhood, and environmental and policy characteristics of the school. Findings indicate that a supportive environment is a necessary but insufficient condition to increase walking and biking to school. Initiatives to increase active school travel may need to include multiple levels of intervention to be effective.

Discrimination of trait-based characteristics by trace element bioaccumulation in riverine fishes

USGS Publications Warehouse

Short, T.M.; DeWeese, L.R.; Dubrovsky, N.M.

2008-01-01

Relations between tissue trace element concentrations and species traits were examined for 45 fish species to determine the extent to which trait-based characteristics accounted for relative differences among species in trace element bioaccumulation. Percentages of fish species correctly classified by discriminant analysis according to traits predicted by tissue trace element concentrations ranged from 72% to 87%. Tissue concentrations of copper, mercury, selenium, and zinc appeared to have the greatest overall influence on differentiating species according to trait characteristics. Discrimination of trait characteristics did not appear to be strongly influenced by local sources of trace elements in the streambed sediment. Bioaccumulation was greatest for those species classified as primarily detritivores, having relatively large adult body size, considered nonmigratory with respect to reproductive strategy, occurring mostly in large or variable size streams and rivers, preferring depositional areas within the stream channel, and preferring benthic rather than open-water habitats. Our findings provide evidence of the strong relationship between bioaccumulation of environmental trace elements and trait-based factors that influence contaminant exposure. ?? 2008 NRC.

Elemental X-ray mapping of agglutinated foraminifer tests: A non- destructive technique for determining compositional characteristics.

USGS Publications Warehouse

Commeau, R.F.; Reynolds, Leslie A.; Poag, C.W.

1985-01-01

The composition of agglutinated foraminiferal tests vary remarkably in response to local substrate characteristics, physiochemical properties of the water column and species- dependant selectivity of test components. We have employed a technique that combines a scanning electron microscope with an energy dispersive X-ray spectrometer system to identify major and minor elemental constituents of agglutinated foraminiferal walls. As a sample is bombarded with a beam of high energy electrons, X-rays are generated that are characteristic of the elements present. As a result, X- ray density maps can be produced for each of several elements present in the tests of agglutinated foraminifers. 

Determination of elemental composition of coffee using UV-pulsed laser induced breakdown spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gondal, M. A., E-mail: magondal@kfupm.edu.sa; Baig, Umair; Dastageer, M. A.

A detection system based on laser induced breakdown spectroscopy (LIBS) was built using 266 nm wavelength pulsed laser from the fourth harmonic of Nd:YAG laser, 500 mm spectrograph and gated ICCD camera with built-in delay generator. The LIBS system was used to study the elemental composition in coffee available in the local market of Saudi Arabia for the detection of elements in coffee samples. The LIBS spectrum of coffee sample revealed the presence magnesium, calcium, aluminum, copper, sodium, barium, bromine, cobalt, chromium, cerium manganese and molybdenum. Atomic transition line of sodium is used to study the parametric dependence of LIBSmore » signal. The study of the dependence of LIBS signal on the laser pulse energy is proven to be linear and the dependence of LIBS signal on the time delay between the excitation and data acquisition showed a typical increase, a peak value and a decrease with the optimum excitation – acquisition delay at 400 ns.« less

Method and System for Temporal Filtering in Video Compression Systems

NASA Technical Reports Server (NTRS)

Lu, Ligang; He, Drake; Jagmohan, Ashish; Sheinin, Vadim

2011-01-01

Three related innovations combine improved non-linear motion estimation, video coding, and video compression. The first system comprises a method in which side information is generated using an adaptive, non-linear motion model. This method enables extrapolating and interpolating a visual signal, including determining the first motion vector between the first pixel position in a first image to a second pixel position in a second image; determining a second motion vector between the second pixel position in the second image and a third pixel position in a third image; determining a third motion vector between the first pixel position in the first image and the second pixel position in the second image, the second pixel position in the second image, and the third pixel position in the third image using a non-linear model; and determining a position of the fourth pixel in a fourth image based upon the third motion vector. For the video compression element, the video encoder has low computational complexity and high compression efficiency. The disclosed system comprises a video encoder and a decoder. The encoder converts the source frame into a space-frequency representation, estimates the conditional statistics of at least one vector of space-frequency coefficients with similar frequencies, and is conditioned on previously encoded data. It estimates an encoding rate based on the conditional statistics and applies a Slepian-Wolf code with the computed encoding rate. The method for decoding includes generating a side-information vector of frequency coefficients based on previously decoded source data and encoder statistics and previous reconstructions of the source frequency vector. It also performs Slepian-Wolf decoding of a source frequency vector based on the generated side-information and the Slepian-Wolf code bits. The video coding element includes receiving a first reference frame having a first pixel value at a first pixel position, a second reference frame having a second pixel value at a second pixel position, and a third reference frame having a third pixel value at a third pixel position. It determines a first motion vector between the first pixel position and the second pixel position, a second motion vector between the second pixel position and the third pixel position, and a fourth pixel value for a fourth frame based upon a linear or nonlinear combination of the first pixel value, the second pixel value, and the third pixel value. A stationary filtering process determines the estimated pixel values. The parameters of the filter may be predetermined constants.

The Longitudinal Association between Perceived Job Characteristics and Fathers' Relationships with Their Children.

ERIC Educational Resources Information Center

Repetti, Rena L.

This longitudinal study examined the effects of fathers' perceptions of work stress on the father-child relationship. The sample of families was fairly homogenous: all two-parent families, primarily white and of European descent, with a target child who, at the beginning of the study, was in fourth grade. In a little less than half the families,…

Eco-Kids Fly Off to the Forests. [Project ECOLogy ELE Pak, Bell Pak].

ERIC Educational Resources Information Center

Bell, Loretta

This is one of a series of units for environmental education developed by the Highline Public Schools. This unit was designed for use with fourth-grade students; it focuses on three forest biomes. Each of the biomes has characteristics of its own. The unit includes eight lessons, as well as additional activities. The unit, which incorporates…

A Study to Determine the Existence and Characteristics of Distinctively Different Subpopulations Subsumed within the Reading Disabled Population.

ERIC Educational Resources Information Center

Steinberg, Laurie S.

Forty-five third-grade and fourth-grade boys identified by their schools as being both normal in intelligence and severely disabled in reading were given a battery of tests of language, visual perception, silent reading comprehension, and finger agnosia. Three consistent groups of subjects emerged from cluster analyses of the results. One group…

The Michigan Context and Performance Report Card: Public Elementary and Middle Schools, 2015

ERIC Educational Resources Information Center

Spalding, Audrey; DeGrow, Ben

2016-01-01

This is the Mackinac Center's fourth school report card and covers elementary and middle schools. A similar report card was published in 2013, and this edition includes two years' worth of new data. A unique characteristic of this report card is that takes into consideration the "context" of a school when assessing its performance.…

Western yellow pine in Arizona and New Mexico

Treesearch

Theodore S. Woolsey

1911-01-01

Western yellow pine is to the Southwest what white pine is to the Northeast, or longleaf pine to the Southeast. The commercial forests of Arizona and New Mexico are three-fourths western yellow pine, which furnishes by far the greater part of the lumber used locally as well as that shipped to outside markets. To describe the characteristics of the species and to...

The Differential Effects of Internship Participation on End-of-Fourth-Year GPA by Demographic and Institutional Characteristics

ERIC Educational Resources Information Center

Parker, Eugene T., III.; Kilgo, Cindy A.; Sheets, Jessica K. Ezell; Pascarella, Ernest T.

2016-01-01

The purpose of this study is to explore the effects of internship participation on college students, specifically the effect on college GPA. Further, because of the capacity to disaggregate students by race in the sample, this study is significant because it provides much needed empirical evidence surrounding the impact of participation in…

Head Start FACES 2000: A Whole-Child Perspective on Program Performance. Fourth Progress Report.

ERIC Educational Resources Information Center

Zill, Nicholas; Resnick, Gary; Kim, Kwang; O'Donnell, Kevin; Sorongon, Alberto; McKey, Ruth Hubbell; Pai-Samant, Shefali; Clark, Cheryl; O'Brien, Robert; D'Elio, Mary Ann

In 1997, Head Start launched the Family and Child Experiences Survey (FACES), a study of a national random sample of Head Start programs, designed to describe characteristics, experiences, and outcomes for children and families served by Head Start. In 2000, FACES began data collection on a new national cohort of 2,800 children and their families…

A Theoretical Analysis of the Performance of Learning Disabled Students on the Woodcock-Johnson Psycho-Educational Battery.

ERIC Educational Resources Information Center

Shinn, Mark; And Others

Two studies were conducted to (1) analyze the subtest characteristics of the Woodcock-Johnson Psycho-Educational Battery, and (2) apply those results to an analysis of 50 fourth grade learning disabled (LD) students' performance on the Battery. Analyses indicated that the poorer performance of LD students on the Woodcock-Johnson Tests of Cognitive…

Warmth and Demand: The Relation between Students' Perceptions of the Classroom Environment and Achievement Growth

ERIC Educational Resources Information Center

Sandilos, Lia E.; Rimm-Kaufman, Sara E.; Cohen, Julia J.

2017-01-01

Theory suggests that African American students benefit from warm and demanding teachers. This study examines the relation between students' perceptions of 634 teachers' warm demander characteristics and achievement growth in fourth and fifth grades (M[subscript student age] = 9-11.5 years). Analyses explored whether relations were moderated by the…

KENNEDY SPACE CENTER, FLA. - Workers on the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, wait for the Space Infrared Telescope Facility (SIRTF) to reach their level. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - Workers on the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, wait for the Space Infrared Telescope Facility (SIRTF) to reach their level. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

KENNEDY SPACE CENTER, FLA. - Workers on the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, watch as the Space Infrared Telescope Facility (SIRTF) clears the platform. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - Workers on the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, watch as the Space Infrared Telescope Facility (SIRTF) clears the platform. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

KENNEDY SPACE CENTER, FLA. - Workers on the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, help guide the Space Infrared Telescope Facility (SIRTF) toward the opening in the foreground. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - Workers on the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station, help guide the Space Infrared Telescope Facility (SIRTF) toward the opening in the foreground. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

KENNEDY SPACE CENTER, FLA. - The Space Infrared Telescope Facility (SIRTF) is rolled out of the hangar at Cape Canaveral Air Force Station during pre-dawn hours. It is being transported to Launch Pad 17-B where it will be lifted into the mobile service tower and prepared for launch. SIRTF consists of three cryogenically cooled science instruments and an 0.85-meter telescope, and is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - The Space Infrared Telescope Facility (SIRTF) is rolled out of the hangar at Cape Canaveral Air Force Station during pre-dawn hours. It is being transported to Launch Pad 17-B where it will be lifted into the mobile service tower and prepared for launch. SIRTF consists of three cryogenically cooled science instruments and an 0.85-meter telescope, and is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

KENNEDY SPACE CENTER, FLA. - The Space Infrared Telescope Facility (SIRTF) is lowered into the opening of the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - The Space Infrared Telescope Facility (SIRTF) is lowered into the opening of the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

KENNEDY SPACE CENTER, FLA. - Before dawn, the Space Infrared Telescope Facility (SIRTF) is attached to an overhead crane that will lift it up the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - Before dawn, the Space Infrared Telescope Facility (SIRTF) is attached to an overhead crane that will lift it up the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

KENNEDY SPACE CENTER, FLA. - Viewed from below, the Space Infrared Telescope Facility (SIRTF) is lifted up the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

NASA Image and Video Library

2003-08-10

KENNEDY SPACE CENTER, FLA. - Viewed from below, the Space Infrared Telescope Facility (SIRTF) is lifted up the mobile service tower on Launch Pad 17-B, Cape Canaveral Air Force Station. SIRTF will be attached to the Delta II rocket and encapsulated in its fairing before launch. Consisting of three cryogenically cooled science instruments and an 0.85-meter telescope, SIRTF is one of NASA’s largest infrared telescopes to be launched. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Most of this infrared radiation is blocked by the Earth's atmosphere and cannot be observed from the ground.

Performance of Low Dissipative High Order Shock-Capturing Schemes for Shock-Turbulence Interactions

NASA Technical Reports Server (NTRS)

Sandham, N. D.; Yee, H. C.

1998-01-01

Accurate and efficient direct numerical simulation of turbulence in the presence of shock waves represents a significant challenge for numerical methods. The objective of this paper is to evaluate the performance of high order compact and non-compact central spatial differencing employing total variation diminishing (TVD) shock-capturing dissipations as characteristic based filters for two model problems combining shock wave and shear layer phenomena. A vortex pairing model evaluates the ability of the schemes to cope with shear layer instability and eddy shock waves, while a shock wave impingement on a spatially-evolving mixing layer model studies the accuracy of computation of vortices passing through a sequence of shock and expansion waves. A drastic increase in accuracy is observed if a suitable artificial compression formulation is applied to the TVD dissipations. With this modification to the filter step the fourth-order non-compact scheme shows improved results in comparison to second-order methods, while retaining the good shock resolution of the basic TVD scheme. For this characteristic based filter approach, however, the benefits of compact schemes or schemes with higher than fourth order are not sufficient to justify the higher complexity near the boundary and/or the additional computational cost.

Effects of nonfiction guided interactive read-alouds and think-alouds on fourth grader's depth of content area science vocabulary knowledge and comprehension

NASA Astrophysics Data System (ADS)

Hanna, Tania Tamara

Effects of nonfiction guided interactive read-alouds and think-alouds as a supplement to basal science textbooks on three vocabulary measures, definitions, examples, and characteristics, and one multiple-choice comprehension measure were assessed for 127 fourth graders over three time periods: pretest, posttest, and a 2-week delayed posttest. Two of three fourth-grade elementary science teachers implemented a series of 12 content-enhanced guided interactive scripted lessons. Two of these teachers implemented two treatments each. The first condition employed basal science textbooks as the text for guided interactive read-alouds and think-alouds while the second treatment employed basal science textbooks in conjunction with nonfiction text sets as the texts for guided interactive read-alouds and think-alouds. The third teacher, guided by traditional lesson plans, provided students with silent independent reading instruction using basal science textbooks. Multivariate analyses of variance and analyses of variance tests showed that mean scores for both treatment groups significantly improved on definitions and characteristics measures at posttest and either stabilized or slightly declined at delayed posttest. The treatment-plus group lost considerably on the examples posttest measure. The treatment group improved mean scores on the examples posttest measure, outperforming the treatment-plus group and the control group. Alternately, the control group significantly improved on the delayed posttest examples measure. Additionally, the two groups implementing guided interactive read-alouds and think-alouds performed better than the independent reading group on multiple-choice comprehension measures at posttest and sustained those gains 2 weeks later on delayed posttests. Findings maintain the incremental nature of vocabulary acquisition and development research and emphasize the roles of listening and speaking as critical features for integrating vocabulary into long-term memory.

Chemical sensor

NASA Technical Reports Server (NTRS)

Rauh, R. David (Inventor)

1990-01-01

A sensor for detecting a chemical substance includes an insertion element having a structure which enables insertion of the chemical substance with a resulting change in the bulk electrical characteristics of the insertion element under conditions sufficient to permit effective insertion; the change in the bulk electrical characteristics of the insertion element is detected as an indication of the presence of the chemical substance.

Microstrip antenna arrays with parasitic elements

NASA Technical Reports Server (NTRS)

Lee, Kai-Fong

1996-01-01

This research was concerned with using parasitic elements to improve the bandwidth, gain and axial ratio characteristics of microstrip antennas and arrays. Significant improvements in these characteristics were obtained using stacked and coplanar parasitic elements. Details of the results are described in a total of 16 journal and 17 conference papers. These are listed in Section four of this report.

Visualising elastic anisotropy: theoretical background and computational implementation

NASA Astrophysics Data System (ADS)

Nordmann, J.; Aßmus, M.; Altenbach, H.

2018-02-01

In this article, we present the technical realisation for visualisations of characteristic parameters of the fourth-order elasticity tensor, which is classified by three-dimensional symmetry groups. Hereby, expressions for spatial representations of uc(Young)'s modulus and bulk modulus as well as plane representations of shear modulus and uc(Poisson)'s ratio are derived and transferred into a comprehensible form to computer algebra systems. Additionally, we present approaches for spatial representations of both latter parameters. These three- and two-dimensional representations are implemented into the software MATrix LABoratory. Exemplary representations of characteristic materials complete the present treatise.

Effect of nonideal square-law detection on static calibration in noise-injection radiometers

NASA Technical Reports Server (NTRS)

Hearn, C. P.

1984-01-01

The effect of nonideal square-law detection on the static calibration for a class of Dicke radiometers is examined. It is shown that fourth-order curvature in the detection characteristic adds a nonlinear term to the linear calibration relationship normally ascribed to noise-injection, balanced Dicke radiometers. The minimum error, based on an optimum straight-line fit to the calibration curve, is derived in terms of the power series coefficients describing the input-output characteristics of the detector. These coefficients can be determined by simple measurements, and detection nonlinearity is, therefore, quantitatively related to radiometric measurement error.

A study of methods to predict and measure the transmission of sound through the walls of light aircraft. Integration of certain singular boundary element integrals for applications in linear acoustics

NASA Technical Reports Server (NTRS)

Zimmerle, D.; Bernhard, R. J.

1985-01-01

An alternative method for performing singular boundary element integrals for applications in linear acoustics is discussed. The method separates the integral of the characteristic solution into a singular and nonsingular part. The singular portion is integrated with a combination of analytic and numerical techniques while the nonsingular portion is integrated with standard Gaussian quadrature. The method may be generalized to many types of subparametric elements. The integrals over elements containing the root node are considered, and the characteristic solution for linear acoustic problems are examined. The method may be generalized to most characteristic solutions.

Mutations that alter a repeated ACCA element located at the 5' end of the Potato virus X genome affect RNA accumulation.

PubMed

Park, Mi-Ri; Kwon, Sun-Jung; Choi, Hong-Soo; Hemenway, Cynthia L; Kim, Kook-Hyung

2008-08-15

The repeated ACCA or AC-rich sequence and structural (SL1) elements in the 5' non-translated region (NTR) of the Potato virus X (PVX) RNA play vital roles in the PVX life cycle by controlling translation, RNA replication, movement, and assembly. It has already been shown that the repeated ACCA or AC-rich sequence affect both gRNA and sgRNA accumulation, while not affecting minus-strand RNA accumulation, and are also required for host protein binding. The functional significance of the repeated ACCA sequence elements in the 5' NTR region was investigated by analyzing the effects of deletion and site-directed mutations on PVX replication in Nicotiana benthamiana plants and NT1 protoplasts. Substitution (ACCA into AAAA or UUUU) mutations introduced in the first (nt 10-13) element in the 5' NTR of the PVX RNA significantly affected viral replication, while mutations introduced in the second (nt 17-20) and third (nt 20-23) elements did not. The fourth (nt 29-32) ACCA element weakly affected virus replication, whereas mutations in the fifth (nt 38-41) significantly reduced virus replication due to the structure disruption of SL1 by AAAA and/or UUUU substitutions. Further characterization of the first ACCA element indicated that duplication of ACCA at nt 10-13 (nt 10-17, ACCAACCA) caused severe symptom development as compared to that of wild type, while deletion of the single element (nt 10-13), DeltaACCA) or tripling of this element caused reduced symptom development. Single- and double-nucleotide substitutions introduced into the first ACCA element revealed the importance of CC located at nt positions 11 and 12. Altogether, these results indicate that the first ACCA element is important for PVX replication.

Mixed garnet laser for a water vapour DIAL

NASA Astrophysics Data System (ADS)

Treichel, Rainer; Strohmaier, Stephan; Nikolov, Susanne; Eichler, Hans-Joachim; Murphy, Eamonn

2017-11-01

For the water vapour DIAL "WALES" the wavelength regions around 935 nm, 942 nm and 944 nm have been identified as the most suitable wavelength ranges. These wavelengths can be obtained using opticalparametric-oscillators (OPOs), stimulated Raman shifters and the Ti-Sapphire laser but none of these systems could deliver all the needed parameters like beam quality, efficiency, pulse length and energy yet. Also these systems are comparably big and heavy making them less suitable for a satellite based application. A fourth possibility to achieve these wavelength ranges is to shift the quasi-3-level laser lines (938 nm and 946 nm) of the Nd:YAG laser by replacing aluminium and yttrium by other rare earth elements. Changes of the host lattice characteristics lead to a shift of the upper and lower laser levels. These modified crystals are summarized under the name of "Mixed Garnet" crystals. Only the Mixed Garnet lasers can be pumped directly with diode laser and use a direct approach to generate the required laser pulses without frequency conversion. Therefore no additional non-linear crystals or special pump lasers are needed and a higher electric to optical efficiency is expected as well as single frequency operation using spectral tuning elements like etalons. In a first phase such mixed garnet crystals had been grown and characterised. The outcome was the selection of the gadolinium-scandium garnet for the most suitable laser crystal. During a second phase the complete laser system with output energy about 18 mJ in single 20 ns pulses and up to 8 mJ in free running mode with a combined pulse width of 250 μs at 942 nm have been demonstrated. The results of the first laser operation and the achieved performance parameter are reported.

Late Byzantine Mineral Soda High Alumina Glasses from Asia Minor: A New Primary Glass Production Group

PubMed Central

Schibille, Nadine

2011-01-01

The chemical characterisation of archaeological glass allows the discrimination between different glass groups and the identification of raw materials and technological traditions of their production. Several lines of evidence point towards the large-scale production of first millennium CE glass in a limited number of glass making factories from a mixture of Egyptian mineral soda and a locally available silica source. Fundamental changes in the manufacturing processes occurred from the eight/ninth century CE onwards, when Egyptian mineral soda was gradually replaced by soda-rich plant ash in Egypt as well as the Islamic Middle East. In order to elucidate the supply and consumption of glass during this transitional period, 31 glass samples from the assemblage found at Pergamon (Turkey) that date to the fourth to fourteenth centuries CE were analysed by electron microprobe analysis (EPMA) and by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The statistical evaluation of the data revealed that the Byzantine glasses from Pergamon represent at least three different glass production technologies, one of which had not previously been recognised in the glass making traditions of the Mediterranean. While the chemical characteristics of the late antique and early medieval fragments confirm the current model of glass production and distribution at the time, the elemental make-up of the majority of the eighth- to fourteenth-century glasses from Pergamon indicate the existence of a late Byzantine glass type that is characterised by high alumina levels. Judging from the trace element patterns and elevated boron and lithium concentrations, these glasses were produced with a mineral soda different to the Egyptian natron from the Wadi Natrun, suggesting a possible regional Byzantine primary glass production in Asia Minor. PMID:21526144

The field theory of specific heat

NASA Astrophysics Data System (ADS)

Gusev, Yu. V.

2016-01-01

Finite temperature quantum field theory in the heat kernel method is used to study the heat capacity of condensed matter. The lattice heat is treated à la P. Debye as energy of the elastic (sound) waves. The dimensionless functional of free energy is re-derived with a cut-off parameter and used to obtain the specific heat of crystal lattices. The new dimensionless thermodynamical variable is formed as Planck's inverse temperature divided by the lattice constant. The dimensionless constant, universal for the class of crystal lattices, which determines the low temperature region of molar specific heat, is introduced and tested with the data for diamond lattice crystals. The low temperature asymptotics of specific heat is found to be the fourth power in temperature instead of the cubic power law of the Debye theory. Experimental data for the carbon group elements (silicon, germanium) and other materials decisively confirm the quartic law. The true low temperature regime of specific heat is defined by the surface heat, therefore, it depends on the geometrical characteristics of the body, while the absolute zero temperature limit is geometrically forbidden. The limit on the growth of specific heat at temperatures close to critical points, known as the Dulong-Petit law, appears from the lattice constant cut-off. Its value depends on the lattice type and it is the same for materials with the same crystal lattice. The Dulong-Petit values of compounds are equal to those of elements with the same crystal lattice type, if one mole of solid state matter were taken as the Avogadro number of the composing atoms. Thus, the Neumann-Kopp law is valid only in some special cases.

Late Byzantine mineral soda high alumina glasses from Asia Minor: a new primary glass production group.

PubMed

Schibille, Nadine

2011-04-19

The chemical characterisation of archaeological glass allows the discrimination between different glass groups and the identification of raw materials and technological traditions of their production. Several lines of evidence point towards the large-scale production of first millennium CE glass in a limited number of glass making factories from a mixture of Egyptian mineral soda and a locally available silica source. Fundamental changes in the manufacturing processes occurred from the eight/ninth century CE onwards, when Egyptian mineral soda was gradually replaced by soda-rich plant ash in Egypt as well as the Islamic Middle East. In order to elucidate the supply and consumption of glass during this transitional period, 31 glass samples from the assemblage found at Pergamon (Turkey) that date to the fourth to fourteenth centuries CE were analysed by electron microprobe analysis (EPMA) and by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The statistical evaluation of the data revealed that the Byzantine glasses from Pergamon represent at least three different glass production technologies, one of which had not previously been recognised in the glass making traditions of the Mediterranean. While the chemical characteristics of the late antique and early medieval fragments confirm the current model of glass production and distribution at the time, the elemental make-up of the majority of the eighth- to fourteenth-century glasses from Pergamon indicate the existence of a late Byzantine glass type that is characterised by high alumina levels. Judging from the trace element patterns and elevated boron and lithium concentrations, these glasses were produced with a mineral soda different to the Egyptian natron from the Wadi Natrun, suggesting a possible regional Byzantine primary glass production in Asia Minor.

Fourth Annual HEDS-UP Forum

NASA Technical Reports Server (NTRS)

Johnson, Kathleen M. (Editor)

2001-01-01

The HEDS-UP (Human Exploration and Development of Space-University Partners) program was instituted to build new relationships between university, faculty, students, and NASA in support of the Human Exploration and Development of Space. The program has provided a mechanism for university students to explore problems of interest to NASA through student engineering design projects, led by a university professor or mentor, and aided by the HEDS-UP staff. HEDS-UP program management advised teams on the selection of projects that were aligned with the goals of the HEDS strategic enterprise, and provided contacts with NASA and industry professionals who served as mentors. Students became acquainted with objectives, strategies, development issues, and technological characteristics of space exploration programs. In doing so, they prepared themselves for future engineering challenges, often discovering that the program was on their critical path to professional advancement. Many of the ideas were innovative and of interest to NASA. Industry benefitted from HEDS-UP as a mechanism to converge with talented students about to enter the work force. In addition, universities became more involved in the teaching of space exploration, and students were encouraged and mentored as they included education outreach as an element in their work. This in turn highlighted their performance to others and universities in their communities.

Heat-driven acoustic cooling engine having no moving parts

DOEpatents

Wheatley, John C.; Swift, Gregory W.; Migliori, Albert; Hofler, Thomas J.

1989-01-01

A heat-driven acoustic cooling engine having no moving parts receives heat from a heat source. The acoustic cooling engine comprises an elongated resonant pressure vessel having first and second ends. A compressible fluid having a substantial thermal expansion coefficient and capable of supporting an acoustic standing wave is contained in the resonant pressure vessel. The heat source supplies heat to the first end of the vessel. A first heat exchanger in the vessel is spaced-apart from the first end and receives heat from the first end. A first thermodynamic element is adjacent to the first heat exchanger and converts some of the heat transmitted by the first heat exchanger into acoustic power. A second thermodynamic element has a first end located spaced-apart from the first thermodynamic element and a second end farther away from the first thermodynamic element than is its first end. The first end of the second thermodynamic element heats while its second end cools as a consequence of the acoustic power. A second heat exchanger is adjacent to and between the first and second thermodynamic elements. A heat sink outside of the vessel is thermally coupled to and receives heat from the second heat exchanger. The resonant pressure vessel can include a housing less than one-fourth wavelength in length coupled to a reservoir. The housing can include a reduced diameter portion communicating with the reservoir.

Numerical scheme approximating solution and parameters in a beam equation

NASA Astrophysics Data System (ADS)

Ferdinand, Robert R.

2003-12-01

We present a mathematical model which describes vibration in a metallic beam about its equilibrium position. This model takes the form of a nonlinear second-order (in time) and fourth-order (in space) partial differential equation with boundary and initial conditions. A finite-element Galerkin approximation scheme is used to estimate model solution. Infinite-dimensional model parameters are then estimated numerically using an inverse method procedure which involves the minimization of a least-squares cost functional. Numerical results are presented and future work to be done is discussed.

KSC-08pd2048

NASA Image and Video Library

2008-07-21

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, workers prepare to install the final solar array wing for the International Space Station onto the S6 truss element. Scheduled to launch on the STS-119 mission, space shuttle Discovery will carry the S6 truss segment to complete the 361-foot-long backbone of the International Space Station. The truss includes the fourth pair of solar array wings and electronics that convert sunlight to power for the orbiting laboratory. Launch is targeted for Feb. 12, 2009. Photo credit: NASA/Troy Cryder

Analysis of an Hp-Non-conforming Discontinuous Galerkin Spectral Element Method for Wave

DTIC Science & Technology

2011-04-01

Scientific Computing, 36 (2008), pp. 351–390. [25] Eleuterio F . Toro , Riemann Solvers and Numerical Methods for Fluid Dynamics, Springer, 1999. [26...denoted by ñ, and the contravariant flux [15] is defined as F̃i = Jeai · F , i = 1, 2, 3, with ai as the contravariant basis vectors. We now describe...wave propagation case by the following definitions, q = ( E v ) ∈ V, Q = ( I 0 0 ρI ) , g = ( 0 f ) ∈ V, with I denoting the fourth-order identity tensor

Geometry and dynamics in the fractional discrete Fourier transform.

PubMed

Wolf, Kurt Bernardo; Krötzsch, Guillermo

2007-03-01

The N x N Fourier matrix is one distinguished element within the group U(N) of all N x N unitary matrices. It has the geometric property of being a fourth root of unity and is close to the dynamics of harmonic oscillators. The dynamical correspondence is exact only in the N-->infinity contraction limit for the integral Fourier transform and its fractional powers. In the finite-N case, several options have been considered in the literature. We compare their fidelity in reproducing the classical harmonic motion of discrete coherent states.

Application and study of land-reclaim based on Arc/Info

NASA Astrophysics Data System (ADS)

Zhao, Jun; Zhang, Ruiju; Wang, Zhian; Li, Shiyong

2005-10-01

This paper firstly puts forward the evaluation models of land-reclaim, which is derived from the thoery of Fuzzy associative memory nerve network and corresponding supplemental CASE tools, based on the model the mode of land reclaim can determined, and then the elements of land-reclaim are displayed and synthesized visually and virtually by virtue of Arc/Info software. In the process of land reclaim, it is particularly important to build the model of land-reclaim and to map the distribution of soil elements. In this way rational and feasible schemes are adopted in order to instruct the project of land reclaim. This thesis mainly takes the fourth mining area of East Beach as an example and puts this model into practice. Based on Arc/Info software the application of land-reclaim is studied and good results are achieved.

Parametric analysis of ATM solar array.

NASA Technical Reports Server (NTRS)

Singh, B. K.; Adkisson, W. B.

1973-01-01

The paper discusses the methods used for the calculation of ATM solar array performance characteristics and provides the parametric analysis of solar panels used in SKYLAB. To predict the solar array performance under conditions other than test conditions, a mathematical model has been developed. Four computer programs have been used to convert the solar simulator test data to the parametric curves. The first performs module summations, the second determines average solar cell characteristics which will cause a mathematical model to generate a curve matching the test data, the third is a polynomial fit program which determines the polynomial equations for the solar cell characteristics versus temperature, and the fourth program uses the polynomial coefficients generated by the polynomial curve fit program to generate the parametric data.

Characteristics pertaining to a stiffness cross-coupled Jeffcott model

NASA Technical Reports Server (NTRS)

Spanyer, K. L.

1985-01-01

Rotordynamic studies of complex systems utilizing multiple degree-of-freedom analysis have been performed to understand response, loads, and stability. In order to understand the fundamental nature of rotordynamic response, the Jeffcott rotor model has received wide attention. The purpose of this paper is to provide a generic rotordynamic analysis of a stiffness cross-coupled Jeffcott rotor model to illustrate characteristics of a second order stiffness-coupled linear system. The particular characteristics investigated were forced response, force vector diagrams, response orbits, and stability. Numerical results were achieved through a fourth order Runge-Kutta method for solving differential equations and the Routh Hurwitz stability criterion. The numerical results were verified to an exact mathematical solution for the steady state response.

2009 Data Standards Manual Student Background Characteristics. For Use by Schools, School Systems and Test Administration Authorities. Fourth Edition

ERIC Educational Resources Information Center

Ministerial Council on Education, Employment, Training and Youth Affairs (NJ1), 2008

2008-01-01

In 2008 the Council of Australian Government (COAG), which comprises the Prime Minister, State Premiers and Territory Chief Ministers, agreed to a new reform agenda to ensure that all Australian school students acquire the knowledge and skills to participate effectively in society and employment in a globalised economy. In order to advance its…

Characteristics and Contributions of School Subjects at the Elementary Level: Results of a Survey of Pre-Service Elementary Teachers from Four Quebec Universities

ERIC Educational Resources Information Center

Lebrun, Johanne; Lenoir, Yves; Oliveira, Anderson Araujo; Morin, Marie-Pier; McConnell, Anne Catherine

2011-01-01

This article presents the results of a survey questionnaire involving 841 third and fourth year students enrolled in a French language Bachelors degree program in Elementary Education at four Quebec universities. The questionnaire dealt with pre-service elementary teachers' representations of the teaching and learning of four school subjects:…

Self-Concepts and Values Among Hispanic and Mainstream Navy Recruits.

DTIC Science & Technology

1982-02-01

used constructs among social scientists, humanists, and the public. Even philosophers deal with values in a special subdivision of their discipline... social science research on values as ethnocentric and they -. . . --s- ~ ~ ’ . -- -2- claim that it tends to label Hispanic values as inferior. Baca...their psycho- social characteristics. Whatley (1976), for example, found significant differences in values between first, second, third and fourth

The Comparison of Fourth Grade Students' Essays Based on Free and Guided Writing Technique in Terms of the Quality of Written Expression

ERIC Educational Resources Information Center

Calp, Mehrali

2015-01-01

Writing exercises are more effective than grammar rules in terms of making children acquire language skills. Knowing the characteristics of text genres and the rules of writing are not enough to improve writing skills of teacher candidates and to acquire necessary strategies for teaching how to write. Teachers would be uncertain about assessment…

Segregation by onset asynchrony.

PubMed

Hancock, P J B; Walton, L; Mitchell, G; Plenderleith, Y; Phillips, W A

2008-08-05

We describe a simple psychophysical paradigm for studying figure-ground segregation by onset asynchrony. Two pseudorandom arrays of Gabor patches are displayed, to left and right of fixation. Within one array, a subset of elements form a figure, such as a randomly curving path, that can only be reliably detected when their onset is not synchronized with that of the background elements. Several findings are reported. First, for most participants, segregation required an onset asynchrony of 20-40 ms. Second, detection was no better when the figure was presented first, and thus by itself, than when the background elements were presented first, even though in the latter case the figure could not be detected in either of the two successive displays alone. Third, asynchrony segregated subsets of randomly oriented elements equally well. Fourth, asynchronous onsets aligned with the path could be discriminated from those lying on the path but not aligned with it. Fifth, both transient and sustained neural activity contribute to detection. We argue that these findings are compatible with neural signaling by synchronized rate codes. Finally, schizophrenic disorganization is associated with reduced sensitivity. Thus, in addition to bearing upon basic theoretical issues, this paradigm may have clinical utility.

The chemistry of the superheavy elements. II. The stability of high oxidation states in group 11 elements: Relativistic coupled cluster calculations for the di-, tetra- and hexafluoro metallates of Cu, Ag, Au, and element 111

NASA Astrophysics Data System (ADS)

Seth, Michael; Cooke, Fiona; Schwerdtfeger, Peter; Heully, Jean-Louis; Pelissier, Michel

1998-09-01

The stability of the high oxidation states +3 and +5 in Group 11 fluorides is studied by relativistic Møller-Plesset (MP) and coupled cluster methods. Higher metal oxidation states are stabilized by relativistic effects. As a result, the hexafluoro complex of the Group 11 element with nuclear charge 111 and oxidation state +5 is the most stable compared to the other congeners. The results also suggest that AgF6- is thermodynamically stable and, therefore, it might be feasable to synthesize this compound. For the copper fluorides we observe very large oscillations in the Møller-Plesset series up to the fourth order. Nonrelativistic calculations lead to the expected trend in the metal-fluorine bond distances for the MF2- compounds, CuF2-

Guidelines and Recommendations on the Use of Higher Order Finite Elements for Bending Analysis of Plates

NASA Astrophysics Data System (ADS)

Carrera, E.; Miglioretti, F.; Petrolo, M.

2011-11-01

This paper compares and evaluates various plate finite elements to analyse the static response of thick and thin plates subjected to different loading and boundary conditions. Plate elements are based on different assumptions for the displacement distribution along the thickness direction. Classical (Kirchhoff and Reissner-Mindlin), refined (Reddy and Kant), and other higher-order displacement fields are implemented up to fourth-order expansion. The Unified Formulation UF by the first author is used to derive finite element matrices in terms of fundamental nuclei which consist of 3×3 arrays. The MITC4 shear-locking free type formulation is used for the FE approximation. Accuracy of a given plate element is established in terms of the error vs. thickness-to-length parameter. A significant number of finite elements for plates are implemented and compared using displacement and stress variables for various plate problems. Reduced models that are able to detect the 3D solution are built and a Best Plate Diagram (BPD) is introduced to give guidelines for the construction of plate theories based on a given accuracy and number of terms. It is concluded that the UF is a valuable tool to establish, for a given plate problem, the most accurate FE able to furnish results within a certain accuracy range. This allows us to obtain guidelines and recommendations in building refined elements in the bending analysis of plates for various geometries, loadings, and boundary conditions.

Investigations on the direct introduction of cigarette smoke for trace elements analysis by inductively coupled plasma mass spectrometry

NASA Astrophysics Data System (ADS)

Chang, Michael J.; Naworal, John D.; Walker, Kathleen; Connell, Chris T.

2003-11-01

Direct introduction of mainstream cigarette smoke into an inductively coupled plasma mass spectrometry (ICP-MS) has been investigated with respect to its feasibility for on-line analysis of trace elements. An automated apparatus was designed and built interfacing a smoking machine with an ICP-MS for smoke generation, collection, injection and analysis. Major and minor elements present in the particulate phase and the gas phase of mainstream cigarette smoke of 2R4F reference cigarettes have been qualitatively identified by examination of their full mass spectra. This method provides a rapid-screening analysis of the transfer of trace elements into mainstream smoke during cigarette combustion. A full suite of elements present in the whole cigarette smoke has been identified, including As, B, Ba, Br, Cd, Cl, Cs, Cu, Hg, I, K, Li, Mn, Na, Pb, Rb, Sb, Sn, Tl and Zn. Of these elements, the major portions of B, Ba, Cs, Cu, K, Li, Mn, Na, Pb, Rb, Sn, Tl and Zn are present in the particulate phase, whereas the major portion of Hg is present in the gas phase. As, Br, Cd, Cl, I and Sb exist in a distribution between the gas phase and the particulate phase. Depending on the element, the precision of measurement ranges from 5 to 25% in terms of relative standard deviation of peak height and peak area, based on the fourth puff of 2R4F mainstream cigarette smoke analyzed in five smoking replicates.

7 CFR 29.2601 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2601 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2351 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2351 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2601 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2601 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2601 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2601 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2351 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2351 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2351 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2351 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2351 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2351 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

7 CFR 29.2601 - Elements of quality and degrees of each element.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Elements of quality and degrees of each element. 29... STANDARD CONTAINER REGULATIONS TOBACCO INSPECTION Standards Elements of Quality § 29.2601 Elements of quality and degrees of each element. Tobacco attributes or characteristics which constitute quality are...

[Determination and principal component analysis of mineral elements based on ICP-OES in Nitraria roborowskii fruits from different regions].

PubMed

Yuan, Yuan-Yuan; Zhou, Yu-Bi; Sun, Jing; Deng, Juan; Bai, Ying; Wang, Jie; Lu, Xue-Feng

2017-06-01

The content of elements in fifteen different regions of Nitraria roborowskii samples were determined by inductively coupled plasma-atomic emission spectrometry(ICP-OES), and its elemental characteristics were analyzed by principal component analysis. The results indicated that 18 mineral elements were detected in N. roborowskii of which V cannot be detected. In addition, contents of Na, K and Ca showed high concentration. Ti showed maximum content variance, while K is minimum. Four principal components were gained from the original data. The cumulative variance contribution rate is 81.542% and the variance contribution of the first principal component was 44.997%, indicating that Cr, Fe, P and Ca were the characteristic elements of N. roborowskii.Thus, the established method was simple, precise and can be used for determination of mineral elements in N.roborowskii Kom. fruits. The elemental distribution characteristics among N.roborowskii fruits are related to geographical origins which were clearly revealed by PCA. All the results will provide good basis for comprehensive utilization of N.roborowskii. Copyright© by the Chinese Pharmaceutical Association.

An ion microprobe study of the intra-crystalline behavior of REE and selected trace elements in pyroxene from mare basalts with different cooling and crystallization histories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shearer, C.K.; Papike, J.J.; Simon, S.B.

1989-05-01

To study the effects of crystallization sequence and rate on trace element zoning characteristics of pyroxenes, the authors used combined electron microprobe-ion microprobe techniques on four nearly isochemical Apollo 12 and 15 pigeonite basalts with different cooling rates and crystallization histories. Major and minor element zoning characteristics are nearly identical to those reported in the literature. All the pyroxenes have similar chondrite-normalized REE patterns: negative Eu anomalies, positive slopes as defined by Yb/Ce, and slopes of REE patterns from Ce to Sm much steeper than from Gd to Yb. These trace element zoning characteristics in pyroxene and the partitioning ofmore » trace elements between pyroxene and the melt are intimately related to the interplay among the efficiency of the crystallization process, the kinetics at the crystal-melt interface, the kinetics of plagioclase nucleation and the characteristics of the crystal chemical substitutions within both the pyroxene and the associated crystallizing phases (i.e. plagioclase).« less

Differentiation characteristics and source analysis of heavy metals in typical brown soil under different vegetation

NASA Astrophysics Data System (ADS)

Dong, Zhicheng; Zhang, Lina; Li, Xueshuang; Lv, Shuangyan; He, Shijie; Liu, Ying; Ma, Xuanxuan

2017-08-01

Anomalous enrichment of soil elements (especially heavy metals) has aroused popular attention in China. In order to discuss distribution characteristics and analyze sources of elements in brown soil, field investigation and sample collection were carried out under different vegetation (cherry, apple, bamboos and pine) in Qixia, a typical apple production base in China. Element contents, pH, electrical conductivity (EC) and magnetic susceptibility (MS) were tested. Results showed that element concentrations were about roughly 2.48 times as China’s background values, while significantly lower than the class ii of National soil Environment Quality Standard (Ni excepted). Meanwhile, vertical distribution and accumulation characteristics of elements in typical brown soil were significantly different under different vegetation. In detail, elements (Zn excepted) of Pine soil accumulated in surface, while they (Cd, Arsenic excepted) increased with depth under other vegetation. Moreover, pH and EC changed like elements, while MS was exactly opposite. It was found that those differences above were mainly caused by human activities (such as improper use of fertilizer, pesticide and inadequate use of organic fertilizer, etc.). Additionally, differences in composition and decomposition rate of vegetation litter also resulted in vertical differentiations of soil elements under different vegetation.

Movement of the projected pedicles relative to the projected vertebral body in a fourth lumbar vertebra during axial rotation.

PubMed

Coleman, Roger R; Thomas, I Walker

2004-01-01

One use of the anteroposterior lumbar radiograph is to determine axial (y-axis) rotation of the lumbar vertebrae. Rotation might be an element of interest to clinicians seeking to evaluate vertebral positioning. Correlate and quantify movements of the projected pedicles relative to the projected vertebral body during axial rotation and determine if vertebral asymmetry and changes in object film distance affect these movements. A three-dimensional computer model of the fourth and fifth lumbar vertebrae, a modeled radiograph source, and a modeled film were produced. The vertebral model was placed in various degrees of axial rotation at a number of different object film distances. Lines from the source were passed through the pedicles of the fourth lumbar vertebral model and additional lines erected tangent to the lateral body margins. These lines were extended to points of contact with the modeled film. The projected pedicles move relative to the projected vertebral body during y-axis rotation. Vertebral asymmetry and object film distances can also affect the distance of the projected pedicle relative to the projected lateral body margin. Axial rotation produces movement of the projected pedicles relative to the projected vertebral body. However, vertebral asymmetry and changes in object film distance also affect the position of the projected pedicles relative to the projected lateral body margin and might serve as confounders to the clinician seeking to analyze vertebral rotation through the use of the projected pedicles.

Torque Characteristics Analysis of Hybrid Stepping Motor Using 3-D Finite Element Method

NASA Astrophysics Data System (ADS)

Kawase, Yoshihiro; Yamaguchi, Tadashi; Masuda, Tatsuya; Domeki, Hideo; Kobori, Masaru

Hybrid stepping motors are widely used for various electric instruments because of high torque, high accuracy and small step angle. It is necessary for the optimum design of hybrid stepping motors to analyze torque characteristics accurately. In this paper, a hybrid stepping motor is analyzed using the 3-D finite element method taking into account the rotation of the armature. The effects of the interlaminar gap in the core on the torque characteristics are clarified using the gap elements. The validity of our method is clarified by comparison between the calculated results and measured ones.

Subependymomas: a clinicopathological study of 6 symptomatic cases.

PubMed

Limaïem, F; Bellil, S B H; Bellil, K; Chelly, I; Jemel, H; Haouet, S; Khaldi, M; Zitouna, M; Kchir, N

2008-10-01

Subependymomas are rare, slow-growing, ependymal neoplasms that commonly occur in the fourth or lateral ventricles. A retrospective study of 6 histologically proven subependymomas was undertaken to analyse their clinicopathological characteristics. There were five male and one female patients ranging in age from 11 to 50 years (mean 35.8 years). All patients were symptomatic at diagnosis. The most common clinical presentations included headache (n=6) and vomiting (n=3). Tumours were located in the lateral ventricle in five cases and in the fourth ventricle in one case. Magnetic resonance imaging detected obstructive hydrocephalus in all cases. Five patients underwent gross total resection and one patient had subtotal excision of the tumour. Histologically, all tumours were characterised by clustering of isomorphic cells arranged against a fibrillary background. Focal cystic degeneration was seen in 5 tumours. During the follow-up period, which ranged between 2 months and 10 years, all patients were symptom-free with no evidence of recurrence.

Dandy-Walker syndrome studied by computed tomography and pneumoencephalography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masdeu, J.C.; Dobben, G.D.; Azar-Kia, B.

1983-04-01

Based on air studies, some authors have disputed the ability of computed tomography (CT) to diagnose posterior fossa cysts. The authors correlated the pneumoencephalographic, CT, and pathological findings in 4 patients with classic Dandy-Walker syndrome. Three cases had been misdiagnosed as retrocerebellar arachnoid cysts because the fourth ventricle was incorrectly considered normal on brow-up or erect air studies, reflecting the inability of such studies to evaluate an agenetic vermis and deficient posterior medullary velum which are characteristic of Dandy-Walker malformation. Careful correlation with autopsy findings showed that even with complete agenesis of the inferior vermis, if the slit between themore » cerebellar hemispheres is narrow, the fourth ventricle could be misinterpreted as normal on pneumoencephalography and sagittal CT. Radionuclide studies, a small amount of air, or metrizamide may be needed to determine whether the cyst communicates with the subarachnoid space.« less

Kron 3: a fourth intermediate age cluster in the SMC with evidence of multiple populations

NASA Astrophysics Data System (ADS)

Hollyhead, K.; Lardo, C.; Kacharov, N.; Bastian, N.; Hilker, M.; Rejkuba, M.; Koch, A.; Grebel, E. K.; Georgiev, I.

2018-05-01

We present the results of a spectroscopic study of the intermediate age (≈6.5 Gyr) massive cluster Kron 3 in the Small Magellanic Cloud. We measure CN and CH band strengths (at ≃3839 and 4300 Å, respectively) using VLT FORS2 spectra of 16 cluster members and find a sub-population of five stars enriched in nitrogen. We conclude that this is evidence for multiple populations in Kron 3, the fourth intermediate age cluster, after Lindsay 1, NGC 416 and NGC 339 (ages 6-8 Gyr), to display this phenomenon originally thought to be a unique characteristic of old globular clusters. At ≈6.5 Gyr this is one of the youngest clusters with multiple populations, indicating that the mechanism responsible for their onset must operate until a redshift of at least 0.75, much later than the peak of globular cluster formation at redshift ˜3.

Descriptions of the Immature Stages of Lutzomyia (Tricholateralis) cruciata (Coquillett) (Diptera: Psychodidae, Phlebotominae).

PubMed

Montes de Oca-Aguilar, A C; Rebollar-Téllez, E A; Piermarini, P M; Ibáñez-Bernal, S

2017-02-01

The present study presents morphological and chaetotaxic descriptions of the immature stages of Lutzomyia (Tricholateralis) cruciata (Coquillett), a probable vector of leishmaniasis in Mexico. The egg exochorion is consistent with the species already known as Lu. (Tricholaterialis), but different from the Lu. cruciata egg of Chiapas, Mexico. The fourth instar larva of Lu. (Tricholateralis) cruciata possesses a novel antenna, combining morphological characteristics of categories 2 and 3 for neotropical sandflies. Differences between the chaetotaxy of first and fourth instar larvae of Lu. cruciata with those of Lu. (Lutzomyia) and Lu. (Tricholaterlis) are compared and discussed. This is the first time in which the chaetotaxy and morphology of pupa of a species belonging to Lutzomyia (Tricholateralis) sensu Galati have been described, and we recorded for the first time the anterior prothorax setae, which was previously only considered for Old World species.

Drospirenone/ethinyl estradiol 3 mg/20 μg (24/4 day regimen): hormonal contraceptive choices – use of a fourth-generation progestin

PubMed Central

Bachmann, Gloria; Kopacz, Sharon

2009-01-01

The combined oral contraceptive pill (COC) consisting of drospirenone 3 mg/ethinyl estradiol 20 μg (3 mg DRSP/20 μg EE-24/4) supplies 24 days of pills with hormones followed by 4 days of hormone-free pills. This regimen is called the 24/4 regimen. The progesterone component of this oral contraceptive pill (OCP), drospirenone (DRSP), is a fourth-generation progestin that has potent progestogenic, antimineralocorticoid, and antiandrogenic activity, which are unique characteristics compared with the other progestogens contained in most of the other OCPs currently marketed. This formulation, in addition to being an effective long-term OCP, has the additional medical benefit of providing a good parallel treatment for premenstrual dysphoric disorder and moderate acne. The effectiveness of 3 mg DRSP/20 μg EE-24/4, its tolerability and safety, and its additional non-contraceptive benefits are discussed. PMID:19936169

Characterization of a Fourth Tungsten-Containing Enzyme from the Hyperthermophilic Archaeon Pyrococcus furiosus

PubMed Central

Roy, Roopali; Adams, Michael W. W.

2002-01-01

Pyrococcus furiosus grows optimally near 100°C using peptides and carbohydrates as carbon sources, and it reduces elemental sulfur (S0), if present, to H2S. Tungsten (W), an element rarely used in biology, is required for optimal growth, and three different tungsten-containing enzymes have been previously purified from this organism. They all oxidize aldehydes of various types and are thought to play primary roles in the catabolism of sugars or amino acids. Here, the purification of a fourth tungsten-containing enzyme, termed WOR 4, from cell extracts of P. furiosus grown with S0 is described. This was achieved by monitoring through multiple chromatography steps the W that is not associated with the three characterized tungstoenzymes. The N-terminal sequence of WOR 4 and the approximate molecular weight of its subunit determined electrophoretically (69,000) correspond to the product of an ORF (PF1961, wor4) present in the complete genome sequence of P. furiosus. WOR 4 is a homodimer and contains approximately one W, three Fe, three or four acid-labile sulfide, and one Ca atom per subunit. The visible and electron paramagnetic resonance spectra of the oxidized and reduced enzyme indicate the presence of an unusual iron-sulfur chromophore. WOR 4 does not oxidize aliphatic or aromatic aldehydes or hydroxy acids, nor does it reduce keto acids. Consistent with prior microarray data, the protein could not be purified from P. furiosus cells grown in the absence of S0, suggesting that it may have a role in S0 metabolism. PMID:12446645

Characterization of a fourth tungsten-containing enzyme from the hyperthermophilic archaeon Pyrococcus furiosus.

PubMed

Roy, Roopali; Adams, Michael W W

2002-12-01

Pyrococcus furiosus grows optimally near 100 degrees C using peptides and carbohydrates as carbon sources, and it reduces elemental sulfur (S(0)), if present, to H(2)S. Tungsten (W), an element rarely used in biology, is required for optimal growth, and three different tungsten-containing enzymes have been previously purified from this organism. They all oxidize aldehydes of various types and are thought to play primary roles in the catabolism of sugars or amino acids. Here, the purification of a fourth tungsten-containing enzyme, termed WOR 4, from cell extracts of P. furiosus grown with S(0) is described. This was achieved by monitoring through multiple chromatography steps the W that is not associated with the three characterized tungstoenzymes. The N-terminal sequence of WOR 4 and the approximate molecular weight of its subunit determined electrophoretically (69,000) correspond to the product of an ORF (PF1961, wor4) present in the complete genome sequence of P. furiosus. WOR 4 is a homodimer and contains approximately one W, three Fe, three or four acid-labile sulfide, and one Ca atom per subunit. The visible and electron paramagnetic resonance spectra of the oxidized and reduced enzyme indicate the presence of an unusual iron-sulfur chromophore. WOR 4 does not oxidize aliphatic or aromatic aldehydes or hydroxy acids, nor does it reduce keto acids. Consistent with prior microarray data, the protein could not be purified from P. furiosus cells grown in the absence of S(0), suggesting that it may have a role in S(0) metabolism.

Adaptive significance of precocious pupation in the bean blister beetle, Epicauta gorhami (Coleoptera: Meloidae), a hypermetamorphic insect.

PubMed

Shintani, Yoshinori; Terao, Misato; Tanaka, Seiji

2017-05-01

Larvae of the bean blister beetle, Epicauta gorhami Marseul (Coleoptera: Meloidae), feed on grasshopper eggs in soil and undergo hypermetamorphosis. They normally enter diapause as a pseudopupa at the fifth instar, a form characteristic of hypermetamorphosis for meloid beetles. However, fourth-instar larvae exposed to long days and high temperature avoid pseudopupal diapause and pupate directly from the fourth instar. Fourth-instar larvae also tend to pupate precociously with a smaller body size if they are deprived of food. In these larvae, the critical day-length controlling induction of pseudopupal diapause becomes shorter than that for fully-fed larvae. In this study, we examined how the reaction norm of food-deprived E. gorhami larvae functions in nature by rearing insects from the egg stage outdoors in different seasons with manipulation of the food supply. The results indicated that most fully-fed larvae entered pseudopupal diapause, whereas food-deprived larvae tended to pupate precociously without entering diapause, especially early in the season. The resulting smaller adults reproduced early in the autumn and their progeny attained the pseudopupal stage before winter, indicating that the reaction norm may have an adaptive role in controlling seasonal development in the face of food shortages, producing a bivoltine life cycle. Copyright © 2017. Published by Elsevier Ltd.

Quality assessment of remote sensing image fusion using feature-based fourth-order correlation coefficient

NASA Astrophysics Data System (ADS)

Ma, Dan; Liu, Jun; Chen, Kai; Li, Huali; Liu, Ping; Chen, Huijuan; Qian, Jing

2016-04-01

In remote sensing fusion, the spatial details of a panchromatic (PAN) image and the spectrum information of multispectral (MS) images will be transferred into fused images according to the characteristics of the human visual system. Thus, a remote sensing image fusion quality assessment called feature-based fourth-order correlation coefficient (FFOCC) is proposed. FFOCC is based on the feature-based coefficient concept. Spatial features related to spatial details of the PAN image and spectral features related to the spectrum information of MS images are first extracted from the fused image. Then, the fourth-order correlation coefficient between the spatial and spectral features is calculated and treated as the assessment result. FFOCC was then compared with existing widely used indices, such as Erreur Relative Globale Adimensionnelle de Synthese, and quality assessed with no reference. Results of the fusion and distortion experiments indicate that the FFOCC is consistent with subjective evaluation. FFOCC significantly outperforms the other indices in evaluating fusion images that are produced by different fusion methods and that are distorted in spatial and spectral features by blurring, adding noise, and changing intensity. All the findings indicate that the proposed method is an objective and effective quality assessment for remote sensing image fusion.

Morphology and ventilatory function of gills in the carpet shark family Parascylliidae (Elasmobranchii, Orectolobiformes).

PubMed

Goto, Tomoaki; Shiba, Yojiro; Shibagaki, Kazuhiro; Nakaya, Kazuhiro

2013-06-01

We examined gill morphology and ventilatory function in the carpet shark family Parascylliidae using 14 preserved specimens of Parascyllium ferrugineum, P. variolatum, P. collare and Cirrhoscyllium japonicum, and two live specimens of P. ferrugineum and P. variolatum. Morphological examinations revealed eight morphological characteristics related to the fifth gill, based on comparisons with other elasmobranchs, viz. large fifth gill slit without gill filaments, anatomical modifications in the fourth ceratobranchial cartilage and coraco-branchialis muscle, and the hypaxialis muscle associated with the fifth gill arch. Ventilation examinations using dyed seawater and prey items showed different water flows through the gill slits for respiration and prey-capture actions. For respiration, water sucked into the mouth was expelled equally through the first to fourth gill slits via a "double-pump" action, there being no involvement of the fifth gill slit. In prey-capture, however, water sucked into the mouth was discharged only via the widely opened fifth gill slit. This form of water flow is similar to that in other benthic suction-feeding sharks (e.g., Chiloscyllium plagiosum), except for the active water discharge by wide expansion and contraction of the fifth parabranchial cavity. The latter is dependent upon the morphological modifications of the fourth and fifth gill arches, derived phylogenetically as a mechanistic suction specialization in Parascylliidae.

Science Instruction in a Culture of High-Stakes Assessment: A Transcendental Phenomenological Study into the Experiences of Missouri Elementary School Teachers in a Non-Assessed Grade Level

ERIC Educational Resources Information Center

Williams, April Dawn-Nell

2017-01-01

The purpose of the transcendental qualitative phenomenological research is to describe the characteristics and strategies of teachers who share the same experiences in teaching science, a non-assessed content, in a high-stakes assessment environment at the third and fourth grade levels. Teacher curriculum choices are dictated by the need to…

Testosterone Administration Moderates Effect of Social Environment on Trust in Women Depending on Second-to-Fourth Digit Ratio

PubMed Central

Buskens, Vincent; Raub, Werner; van Miltenburg, Nynke; Montoya, Estrella R.; van Honk, Jack

2016-01-01

Animal research has established that effects of hormones on social behaviour depend on characteristics of both individual and environment. Insight from research on humans into this interdependence is limited, though. Specifically, hardly any prior testosterone experiments in humans scrutinized the interdependency of testosterone with the social environment. Nonetheless, recent testosterone administration studies in humans repeatedly show that a proxy for individuals’ prenatal testosterone-to-estradiol ratio, second-to-fourth digit-ratio (2D:4D ratio), influences effects of testosterone administration on human social behaviour. Here, we systematically vary the characteristics of the social environment and show that, depending on prenatal sex hormone priming, testosterone administration in women moderates the effect of the social environment on trust. We use the economic trust game and compare one-shot games modelling trust problems in relations between strangers with repeated games modelling trust problems in ongoing relations between partners. As expected, subjects are more trustful in repeated than in one-shot games. In subjects prenatally relatively highly primed by testosterone, however, this effect disappears after testosterone administration. We argue that impairments in cognitive empathy may reduce the repeated game effect on trust after testosterone administration in subjects with relatively high prenatal testosterone exposure and propose a neurobiological explanation for this effect. PMID:27282952

Testosterone Administration Moderates Effect of Social Environment on Trust in Women Depending on Second-to-Fourth Digit Ratio.

PubMed

Buskens, Vincent; Raub, Werner; van Miltenburg, Nynke; Montoya, Estrella R; van Honk, Jack

2016-06-10

Animal research has established that effects of hormones on social behaviour depend on characteristics of both individual and environment. Insight from research on humans into this interdependence is limited, though. Specifically, hardly any prior testosterone experiments in humans scrutinized the interdependency of testosterone with the social environment. Nonetheless, recent testosterone administration studies in humans repeatedly show that a proxy for individuals' prenatal testosterone-to-estradiol ratio, second-to-fourth digit-ratio (2D:4D ratio), influences effects of testosterone administration on human social behaviour. Here, we systematically vary the characteristics of the social environment and show that, depending on prenatal sex hormone priming, testosterone administration in women moderates the effect of the social environment on trust. We use the economic trust game and compare one-shot games modelling trust problems in relations between strangers with repeated games modelling trust problems in ongoing relations between partners. As expected, subjects are more trustful in repeated than in one-shot games. In subjects prenatally relatively highly primed by testosterone, however, this effect disappears after testosterone administration. We argue that impairments in cognitive empathy may reduce the repeated game effect on trust after testosterone administration in subjects with relatively high prenatal testosterone exposure and propose a neurobiological explanation for this effect.

Epilepsy and workplace discrimination: population characteristics and trends.

PubMed

West, Michael D; Dye, Amy N; McMahon, Brian T

2006-08-01

This study investigates the nature of allegations of workplace discrimination made by job seekers and workers with epilepsy. Demographic characteristics of individuals making allegations were consistent with those of individuals with epilepsy nationwide. Approximately three-fourths of allegations were related to post-hire issues, such as discrimination in promotion and termination, disciplinary actions, and harassment. The lowest rate of merit allegation was related to discrimination in hiring. Comparison of merit allegations before and after the U.S. Supreme Court's Sutton decision revealed that claimants have had higher rates of success following the decision, suggesting that the Sutton decision has had no negative effect on claimants with epilepsy.

Ultra-Sensitive Elemental Analysis Using Plasmas 7.Application to Criminal Investigation

NASA Astrophysics Data System (ADS)

Suzuki, Yasuhiro

This paper describes the application of trace elemental analysis using ICP-AES and ICP-MS to criminal investigation. The comparison of trace elements, such as Rb, Sr, Zr, and so on, is effective for the forensic discrimination of glass fragments, which can be important physical evidence for connecting a suspect to a crime scene or to a victim. This procedure can be applied also to lead shotgun pellets by the removal of matrix lead as the sulfate precipitate after the dissolution of a pellet sample. The determination of a toxic element in bio-logical samples is required to prove that a victim ingested this element. Arsenous acids produced in Japan, China, Germany and Switzerland show characteristic patterns of trace elements characteristic to each country.

Infantile anorexia, co-excitation and co-mastery in the parent/baby cathexis: The contribution of Sigmund and Anna Freud.

PubMed

Cascales, Thomas

2017-04-01

Recent epidemiological studies show that 2% of babies in ordinary paediatric clinics suffer from infantile anorexia. In the first part of this paper we present a case study from our hospital clinical activity. Our framework combines clinical psychoanalytic sessions and perinatal videos. In the second part, we will focus on the concepts of instinct and excitation proposed by Sigmund Freud and the concept of mastery proposed by Anna Freud. In the third part, we will examine these concepts in the light of the case study. The fourth part is devoted to clinical recommendations from our hospital psychoanalytic practice. In conclusion, unlike other clinical settings, the psychoanalytic setting allows for the elaboration of the parental hatred included in the libidinal cathexis. Our psychoanalytic setting (sessions/videos) makes it possible to decontaminate parental intrapsychic elements overloaded with excitement, saturated with hate elements, and rendered sterile by the instinct for mastery. An initial part of the treatment process involves working through the intersubjective elements observed in the video. Copyright © 2016 Institute of Psychoanalysis.

Non-destructive elemental analysis of a carbonaceous chondrite with direct current Muon beam at MuSIC.

PubMed

Terada, K; Sato, A; Ninomiya, K; Kawashima, Y; Shimomura, K; Yoshida, G; Kawai, Y; Osawa, T; Tachibana, S

2017-11-13

Electron- or X-ray-induced characteristic X-ray analysis has been widely used to determine chemical compositions of materials in vast research fields. In recent years, analysis of characteristic X-rays from muonic atoms, in which a muon is captured, has attracted attention because both a muon beam and a muon-induced characteristic X-ray have high transmission abilities. Here we report the first non-destructive elemental analysis of a carbonaceous chondrite using one of the world-leading intense direct current muon beam source (MuSIC; MUon Science Innovative Channel). We successfully detected characteristic muonic X-rays of Mg, Si, Fe, O, S and C from Jbilet Winselwan CM chondrite, of which carbon content is about 2 wt%, and the obtained elemental abundance pattern was consistent with that of CM chondrites. Because of its high sensitivity to carbon, non-destructive elemental analysis with a muon beam can be a novel powerful tool to characterize future retuned samples from carbonaceous asteroids.

Mentoring Clinical-Year Medical Students: Factors Contributing to Effective Mentoring

PubMed Central

Fallatah, Hind I; Soo Park, Yoon; Farsi, Jamila; Tekian, Ara

2018-01-01

Theory: Academic mentoring is an effective method of enhancing undergraduate medical student academic performance, research productivity, career planning, and overall satisfaction. Hypotheses: This study investigates the relationship between mentor characteristics and mentee academic performance, with an emphasis on identifying students who need special support. Methods: A cross-sectional study was conducted among fourth-year medical students at King Abdulaziz University Faculty of Medicine undertaking the clinical skills module (CSM) rotation. Mentors included senior and junior faculty members from the Department of Internal Medicine and the Department of Family Medicine. King Abdulaziz University Faculty of Medicine assigned 1 mentor for every 10 medical students. We organized our mentoring program in the following format: (1) an initial group meeting (mentor with all 10 medical students) and (2) subsequent one-on-one meetings (mentor with each mentee alone). We assessed mentor characteristics, student academic performance and satisfaction, and the rate of mentees referred for special support. Results: A total of 184 students completed the CSM rotation. Among these, 90 students responded to the preprogram survey, with 83% reporting that mentoring was important to them. Group meetings and one-on-one meetings were attended by 60% and 49% of all students, respectively. The most frequent type of support required by the participating students was psychological support (12% of mentees). Participation in the mentoring program had no significant effect on student academic performance. Mentor seniority (P = .024) and motivation (P = .002) were significantly associated with the rate of student referral for special support. Conclusions: This study demonstrated that academic mentoring can be effective in enhancing student outcomes and promoting special support for students. Moreover, mentor and mentee motivation were found to be essential elements of a successful mentoring program. PMID:29497707

Computation techniques and computer programs to analyze Stirling cycle engines using characteristic dynamic energy equations

NASA Technical Reports Server (NTRS)

Larson, V. H.

1982-01-01

The basic equations that are used to describe the physical phenomena in a Stirling cycle engine are the general energy equations and equations for the conservation of mass and conversion of momentum. These equations, together with the equation of state, an analytical expression for the gas velocity, and an equation for mesh temperature are used in this computer study of Stirling cycle characteristics. The partial differential equations describing the physical phenomena that occurs in a Stirling cycle engine are of the hyperbolic type. The hyperbolic equations have real characteristic lines. By utilizing appropriate points along these curved lines the partial differential equations can be reduced to ordinary differential equations. These equations are solved numerically using a fourth-fifth order Runge-Kutta integration technique.

Memory elements in the electrical network of Mimosa pudica L.

PubMed Central

Volkov, Alexander G; Reedus, Jada; Mitchell, Colee M; Tuckett, Clayton; Volkova, Maya I; Markin, Vladislav S; Chua, Leon

2014-01-01

The fourth basic circuit element, a memristor, is a resistor with memory that was postulated by Chua in 1971. Here we found that memristors exist in vivo. The electrostimulation of the Mimosa pudica by bipolar sinusoidal or triangle periodic waves induce electrical responses with fingerprints of memristors. Uncouplers carbonylcyanide-3-chlorophenylhydrazone and carbonylcyanide-4-trifluoromethoxy-phenyl hydrazone decrease the amplitude of electrical responses at low and high frequencies of bipolar sinusoidal or triangle periodic electrostimulating waves. Memristive behavior of an electrical network in the Mimosa pudica is linked to the properties of voltage gated ion channels: the channel blocker TEACl reduces the electric response to a conventional resistor. Our results demonstrate that a voltage gated K+ channel in the excitable tissue of plants has properties of a memristor. The discovery of memristors in plants creates a new direction in the modeling and understanding of electrical phenomena in plants. PMID:25482796

Memory elements in the electrical network of Mimosa pudica L.

PubMed

Volkov, Alexander G; Reedus, Jada; Mitchell, Colee M; Tuckett, Clayton; Volkova, Maya I; Markin, Vladislav S; Chua, Leon

2014-01-01

The fourth basic circuit element, a memristor, is a resistor with memory that was postulated by Chua in 1971. Here we found that memristors exist in vivo. The electrostimulation of the Mimosa pudica by bipolar sinusoidal or triangle periodic waves induce electrical responses with fingerprints of memristors. Uncouplers carbonylcyanide-3-chlorophenylhydrazone and carbonylcyanide-4-trifluoromethoxy-phenyl hydrazone decrease the amplitude of electrical responses at low and high frequencies of bipolar sinusoidal or triangle periodic electrostimulating waves. Memristive behavior of an electrical network in the Mimosa pudica is linked to the properties of voltage gated ion channels: the channel blocker TEACl reduces the electric response to a conventional resistor. Our results demonstrate that a voltage gated K(+) channel in the excitable tissue of plants has properties of a memristor. The discovery of memristors in plants creates a new direction in the modeling and understanding of electrical phenomena in plants.

Effect of cadmium-feeding on tissue concentrations of elements in germ-free silkworm (Bombyx mori) larvae and distribution of cadmium in the alimentary canal.

PubMed

Suzuki, K T; Aoki, Y; Nishikawa, M; Masui, H; Matsubara, F

1984-01-01

Silkworm (Bombyx mori) larvae were reared on an artificial diet containing cadmium (Cd) at concentrations of 5 and 80 micrograms/g wet diet from hatching to the fourth instar and then for 5 days at the fifth instar, respectively. Concentrations of Cd and other elements in the alimentary canal, Malpighian tubes, silk gland, fat body and other organs were determined simultaneously by inductively coupled argon plasma-atomic emission spectrometry. Cd was accumulated in the alimentary canal and Malpighian tubes at concentrations of 1100 and 470 micrograms/g dry wt, respectively. The distribution of Cd in the supernatants of the two highly accumulated organs were determined on an SW column by high performance liquid chromatography-atomic absorption spectrophotometry. Cd was primarily bound to inducible high molecular weight Cd-binding proteins.

Application of multivariate statistical techniques for differentiation of ripe banana flour based on the composition of elements.

PubMed

Alkarkhi, Abbas F M; Ramli, Saifullah Bin; Easa, Azhar Mat

2009-01-01

Major (sodium, potassium, calcium, magnesium) and minor elements (iron, copper, zinc, manganese) and one heavy metal (lead) of Cavendish banana flour and Dream banana flour were determined, and data were analyzed using multivariate statistical techniques of factor analysis and discriminant analysis. Factor analysis yielded four factors explaining more than 81% of the total variance: the first factor explained 28.73%, comprising magnesium, sodium, and iron; the second factor explained 21.47%, comprising only manganese and copper; the third factor explained 15.66%, comprising zinc and lead; while the fourth factor explained 15.50%, comprising potassium. Discriminant analysis showed that magnesium and sodium exhibited a strong contribution in discriminating the two types of banana flour, affording 100% correct assignation. This study presents the usefulness of multivariate statistical techniques for analysis and interpretation of complex mineral content data from banana flour of different varieties.

The influence of the great inequality on the secular disturbing function of the planetary system.

NASA Technical Reports Server (NTRS)

Musen, P.

1971-01-01

This paper derives the contribution by the great inequality to the secular disturbing function of the principal planets. Andoyer's expansion of the planetary disturbing function and von Zeipel's method of eliminating the periodic terms is employed; thereby, the corrected secular disturbing function for the planetary system is derived. The conclusion is drawn that the canonicity of the equations for the secular variation of the heliocentric elements can be preserved if there be retained, in the secular disturbing function, terms only of the second and fourth order relative to the eccentricity and inclinations. The Krylov-Bogoliubov method is suggested for eliminating periodic terms, if it is desired to include the secular perturbations of the fifth and higher order in the heliocentric elements. The additional part of the secular disturbing function derived in this paper can be included in existing theories of the secular effects of principal planets.

Zebra finches are able to learn affixation-like patterns.

PubMed

Chen, Jiani; Jansen, Naomi; ten Cate, Carel

2016-01-01

Adding an affix to transform a word is common across the world languages, with the edges of words more likely to carry out such a function. However, detecting affixation patterns is also observed in learning tasks outside the domain of language, suggesting that the underlying mechanism from which affixation patterns have arisen may not be language or even human specific. We addressed whether a songbird, the zebra finch, is able to discriminate between, and generalize, affixation-like patterns. Zebra finches were trained and tested in a Go/Nogo paradigm to discriminate artificial song element sequences resembling prefixed and suffixed 'words.' The 'stems' of the 'words,' consisted of different combinations of a triplet of song elements, to which a fourth element was added as either a 'prefix' or a 'suffix.' After training, the birds were tested with novel stems, consisting of either rearranged familiar element types or novel element types. The birds were able to generalize the affixation patterns to novel stems with both familiar and novel element types. Hence, the discrimination resulting from the training was not based on memorization of individual stimuli, but on a shared property among Go or Nogo stimuli, i.e., affixation patterns. Remarkably, birds trained with suffixation as Go pattern showed clear evidence of using both prefix and suffix, while those trained with the prefix as the Go stimulus used primarily the prefix. This finding illustrates that an asymmetry in attending to different affixations is not restricted to human languages.

Neural-Net Processing of Characteristic Patterns From Electronic Holograms of Vibrating Blades

NASA Technical Reports Server (NTRS)

Decker, Arthur J.

1999-01-01

Finite-element-model-trained artificial neural networks can be used to process efficiently the characteristic patterns or mode shapes from electronic holograms of vibrating blades. The models used for routine design may not yet be sufficiently accurate for this application. This document discusses the creation of characteristic patterns; compares model generated and experimental characteristic patterns; and discusses the neural networks that transform the characteristic patterns into strain or damage information. The current potential to adapt electronic holography to spin rigs, wind tunnels and engines provides an incentive to have accurate finite element models lor training neural networks.

Review of Combustion Stability Characteristics of Swirl Coaxial Element Injectors

NASA Technical Reports Server (NTRS)

Hulka, J. R.; Casiano, M. J.

2013-01-01

Liquid propellant rocket engine injectors using coaxial elements where the center liquid is swirled have become more common in the United States over the past several decades, although primarily for technology or advanced development programs. Currently, only one flight engine operates with this element type in the United States (the RL10 engine), while the element type is very common in Russian (and ex-Soviet) liquid propellant rocket engines. In the United States, the understanding of combustion stability characteristics of swirl coaxial element injectors is still very limited, despite the influx of experimental and theoretical information from Russia. The empirical and theoretical understanding is much less advanced than for the other prevalent liquid propellant rocket injector element types, the shear coaxial and like-on-like paired doublet. This paper compiles, compares and explores the combustion stability characteristics of swirl coaxial element injectors tested in the United States, dating back to J-2 and RL-10 development, and extending to very recent programs at the NASA MSFC using liquid oxygen and liquid methane and kerosene propellants. Included in this study are several other relatively recent design and test programs, including the Space Transportation Main Engine (STME), COBRA, J-2X, and the Common Extensible Cryogenic Engine (CECE). A presentation of the basic data characteristics is included, followed by an evaluation by several analysis techniques, including those included in Rocket Combustor Interactive Design and Analysis Computer Program (ROCCID), and methodologies described by Hewitt and Bazarov.

Analysis of superconducting electromagnetic finite elements based on a magnetic vector potential variational principle

NASA Technical Reports Server (NTRS)

Schuler, James J.; Felippa, Carlos A.

1991-01-01

Electromagnetic finite elements are extended based on a variational principle that uses the electromagnetic four potential as primary variable. The variational principle is extended to include the ability to predict a nonlinear current distribution within a conductor. The extension of this theory is first done on a normal conductor and tested on two different problems. In both problems, the geometry remains the same, but the material properties are different. The geometry is that of a 1-D infinite wire. The first problem is merely a linear control case used to validate the new theory. The second problem is made up of linear conductors with varying conductivities. Both problems perform well and predict current densities that are accurate to within a few ten thousandths of a percent of the exact values. The fourth potential is then removed, leaving only the magnetic vector potential, and the variational principle is further extended to predict magnetic potentials, magnetic fields, the number of charge carriers, and the current densities within a superconductor. The new element produces good results for the mean magnetic field, the vector potential, and the number of superconducting charge carriers despite a relatively high system condition number. The element did not perform well in predicting the current density. Numerical problems inherent to this formulation are explored and possible remedies to produce better current predicting finite elements are presented.

Species classification and bioactive ingredients accumulation of BaiJiangCao based on characteristic inorganic elements analysis by inductively coupled plasma-mass spectrometry and multivariate analysis

PubMed Central

Wen-Lan, Li; Xue, Zhang; Xin-Xin, Yang; Shuai, Wang; Lin, Zhao; Huan-Jun, Zhao; Yong-Rui, Bao; Chen-Feng, Ji; Ning, Chen; Zheng, Xiang

2015-01-01

Background: Patrinia scabiosaefolia Fisch and Patrinia villosa (Thunb.) Juss., two species herbs with the same Chinese name “BaiJiangCao”, are important ancient herbal medicines widely used for more than 2000 years. The clinical application of two species herb is confused due to the difficult identification. Objective: The objective was to authenticate the species of BaiJiangCao and analyze the accumulation of bioactive ingredients based on characteristic inorganic elements analysis. Materials and Methods: Content of 32 inorganic elements in BaiJiangCao from different habitats were determined by inductively coupled plasma-mass spectrometry (ICP-MS), and the characteristic inorganic elements were picked to distinguish the species of the herb by principal component analysis and cluster analysis. Contents of two bioactive ingredients, luteoloside, and oleanolic acid, in the samples, were also analyzed by high-performance liquid chromatography method. Relationship between accumulation of bioactive ingredients and content of macroelements in BaiJiangCao was established by statistics. Results: A 4 macroelements (Na, Mg, K, Fe) in 32 determined inorganic elements were picked for characteristic inorganic elements. Content of Na, Mg, K and Fe showed positive correlations with that of luteoloside, content of Na, Mg showed positive correlations with that of oleanolic acid, but content of K and Fe showed negative correlations with that of oleanolic acid. Conclusion: It is for the first time to utilize the characteristic inorganic elements as an index to classify the herb species by the method of ICP-MS and multivariate analysis. And it is also the first report to investigate the influence of inorganic elements in herb on the accumulation of bioactive components which could affect the pharmacological efficacy of the herb medicine. And this method could also be utilized in research of corresponding aspects. PMID:26600721

Ambient air metallic pollutant study at HAF areas during 2013-2014

NASA Astrophysics Data System (ADS)

Fang, Guor-Cheng; Kuo, Yu-Chen; Zhuang, Yuan-Jie

2015-05-01

This study characterized diurnal variations of the total suspended particulate (TSP) concentrations, dry deposition flux and dry deposition velocity of metallic elements at Taichung Harbor (Harbor), Gong Ming Junior High School (Airport) and Sha lu Farmland (Farmland) sampling sites in central Taiwan between August, 2013 and July, 2014 in this study. The result indicated that: 1) the ambient air particulate concentrations, dry depositions were displayed as Harbor > Farmland > Airport during the day time sampling period. However, dry deposition velocities were shown as Airport > Harbor > Farmland for this study. 2) The ambient air particulate concentrations, dry depositions were displayed as Airport > Harbor > Farmland during the night time sampling period. However, dry deposition velocities were shown as Farmland > Harbor > Airport for this study. 3) The metallic element Zn has the average highest concentrations at Airport, Harbor and Farmland among all the metallic elements during the day time sampling period in this study. 4) There were significant differences for the metallic elements (Cr, Cu, Zn and Pb) in dry depositions at these three characteristic sampling sites (HAF) for the night time sampling period. The only exception is metallic element Cd. It displayed that there were no significant differences for the metallic element Cd at the Airport and Farmland sampling sites during the night time sampling period. 5) The average highest values for the metallic element Cu in TSP among the three characteristic sampling sites occurred during the fall and winter seasons for this study. As for the dry depositions, the average highest values in dry deposition among the three characteristic sampling sites occurred during the spring and summer seasons for this study. 6) The average highest values for the metallic element Cd in TSP among the three characteristic sampling sites occurred during the spring and summer seasons for this study. As for the dry depositions, the average highest values in dry deposition among the three characteristic sampling sites occurred during fall and winter for this study.

Assessment of club patrons' alcohol and drug use: the use of biological markers.

PubMed

Miller, Brenda A; Byrnes, Hilary F; Branner, Amy C; Voas, Robert; Johnson, Mark B

2013-11-01

Young adulthood (ages 18-25 years) represents a time when high-risk behaviors, including alcohol and drug use, peak. Electronic music dance events (EMDEs) featured at clubs provide an ecologic niche for these high-risk behaviors. This paper examines the prevalence of alcohol and drug use among EMDE patrons. Examination of personal characteristics associated with exit levels of alcohol and drug use identifies important indicators of risk taking for prevention strategies. Data were collected anonymously during 2010-2012 from 2028 patrons as they entered and exited clubs in the San Francisco Bay area featuring EMDEs. Nearly half were aged ≤25 years. Biological measures of drug and alcohol and self-reported personal characteristics were attained. Analyses were completed in 2012. At entrance, more than one fifth of patrons were positive for drug use and one fourth arrived either impaired (blood alcohol concentration [BAC]: 0.05%-0.079%) or intoxicated (BAC: >0.08%) by alcohol. At exit, one fourth tested positive for drugs, and nearly half were impaired or intoxicated by alcohol. Individual characteristics that were important for levels of risk included prior alcohol use behaviors, sexual identity, ethnic/racial identity, and transportation to the event. Gender did not differentiate for alcohol use but fewer women used drugs. Findings confirm the importance of targeting EMDEs for prevention efforts. EMDEs attract young working adults who are engaged in heavy alcohol and/or drug use. Targeting these social settings for delivering public health prevention strategies regarding alcohol and drug use and related harm is indicated by the findings. © 2013 American Journal of Preventive Medicine.

Cognitive ability, social desirability, body mass index and socioeconomic status as correlates of fourth-grade children's dietary-reporting accuracy.

PubMed

Smith, A F; Baxter, S D; Hitchcock, D B; Finney, C J; Royer, J A; Guinn, C H

2016-09-01

To investigate the relationship of reporting accuracy in 24-h dietary recalls to child-respondent characteristics-cognitive ability, social desirability, body mass index (BMI) percentile and socioeconomic status (SES). Fourth-grade children (mean age 10.1 years) were observed eating two school meals and interviewed about dietary intake for 24 h that included those meals. (Eight multiple-pass interview protocols operationalized the conditions of an experiment that crossed two retention intervals-short and long-with four prompts (ways of eliciting reports in the first pass)). Academic achievement-test scores indexed cognitive ability; social desirability was assessed by questionnaire; height and weight were measured to calculate BMI; nutrition-assistance program eligibility information was obtained to index SES. Reported intake was compared to observed intake to calculate measures of reporting accuracy for school meals at the food-item (omission rate; intrusion rate) and energy (correspondence rate; inflation ratio) levels. Complete data were available for 425 of 480 validation-study participants. Controlling for manipulated variables and other measured respondent characteristics, for one or more of the outcome variables, reporting accuracy increased with cognitive ability (omission rate, intrusion rate, correspondence rate, P<0.001), decreased with social desirability (correspondence rate, P<0.0004), decreased with BMI percentile (correspondence rate, P=0.001) and was better by higher- than by lower-SES children (intrusion rate, P=0.001). Some of these effects were moderated by interactions with retention interval and sex. Children's dietary-reporting accuracy is systematically related to such respondent characteristics as cognitive ability, social desirability, BMI percentile and SES.

Low Dissipative High Order Shock-Capturing Methods Using Characteristic-Based Filters

NASA Technical Reports Server (NTRS)

Yee, H. C.; Sandham, N. D.; Djomehri, M. J.

1998-01-01

An approach which closely maintains the non-dissipative nature of classical fourth or higher- order spatial differencing away from shock waves and steep gradient regions while being capable of accurately capturing discontinuities, steep gradient and fine scale turbulent structures in a stable and efficient manner is described. The approach is a generalization of the method of Gustafsson and Oisson and the artificial compression method (ACM) of Harten. Spatially non-dissipative fourth or higher-order compact and non-compact spatial differencings are used as the base schemes. Instead of applying a scalar filter as in Gustafsson and Olsson, an ACM like term is used to signal the appropriate amount of second or third-order TVD or ENO types of characteristic based numerical dissipation. This term acts as a characteristic filter to minimize numerical dissipation for the overall scheme. For time-accurate computations, time discretizations with low dissipation are used. Numerical experiments on 2-D vortical flows, vortex-shock interactions and compressible spatially and temporally evolving mixing layers showed that the proposed schemes have the desired property with only a 10% increase in operations count over standard second-order TVD schemes. Aside from the ability to accurately capture shock-turbulence interaction flows, this approach is also capable of accurately preserving vortex convection. Higher accuracy is achieved with fewer grid points when compared to that of standard second-order TVD or ENO schemes. To demonstrate the applicability of these schemes in sustaining turbulence where shock waves are absent, a simulation of 3-D compressible turbulent channel flow in a small domain is conducted.

Low Dissipative High Order Shock-Capturing Methods using Characteristic-Based Filters

NASA Technical Reports Server (NTRS)

Yee, H. C.; Sandham, N. D.; Djomehri, M. J.

1998-01-01

An approach which closely maintains the non-dissipative nature of classical fourth or higher- order spatial differencing away from shock waves and steep gradient regions while being capable of accurately capturing discontinuities, steep gradient and fine scale turbulent structures in a stable and efficient manner is described. The approach is a generalization of the method of Gustafsson and Olsson and the artificial compression method (ACM) of Harten. Spatially non-dissipative fourth or higher-order compact and non-compact spatial differencings are used as the base schemes. Instead of applying a scalar filter as in Gustafsson and Olsson, an ACM like term is used to signal the appropriate amount of second or third-order TVD or ENO types of characteristic based numerical dissipation. This term acts as a characteristic filter to minimize numerical dissipation for the overall scheme. For time-accurate computations, time discretizations with low dissipation are used. Numerical experiments on 2-D vortical flows, vortex-shock interactions and compressible spatially and temporally evolving mixing layers showed that the proposed schemes have the desired property with only a 10% increase in operations count over standard second-order TVD schemes. Aside from the ability to accurately capture shock-turbulence interaction flows, this approach is also capable of accurately preserving vortex convection. Higher accuracy is achieved with fewer grid points when compared to that of standard second-order TVD or ENO schemes. To demonstrate the applicability of these schemes in sustaining turbulence where shock waves are absent, a simulation of 3-D compressible turbulent channel flow in a small domain is conducted.

The Effect of Alloying Elements on Thermal Conductivity and Casting Characteristic in High Pressure Die Casting of Aluminum Alloy

NASA Astrophysics Data System (ADS)

Kim, Cheol-Woo; Cho, Jae-Ik; Choi, Se-Weon; Kim, Young-Chan; Kang, Chang-Seog

Recently, demand of aluminum alloys for use in high thermal conductivity application is increases but the most aluminum die casting alloys exhibit very lower thermal properties because of their high concentrations of alloying elements. However, those alloying elements are essential to obtain sufficient fluidity and mechanical strength. Therefore, the purpose of this study is to analyze the effect of alloying elements in die casting alloys, Si, Cu, Mg, Fe and Mn, in thermal conductivity, die casting characteristics and mechanical properties and find out the appropriate amount of each alloying element for development of heat sink component. The results showed that Mn had the most deleterious effect in thermal conductivity and Si and Fe contents were important to improve strength and limit casting defects, such as hot tearing and die soldering. The alloy with 0.2 1.0wt%Cu, 0.3 0.6wt%Fe and 1.0 2.0wt%Si showed very good combination of high thermal conductivity and good casting characteristics.

Engine dynamic analysis with general nonlinear finite element codes. II - Bearing element implementation, overall numerical characteristics and benchmarking

NASA Technical Reports Server (NTRS)

Padovan, J.; Adams, M.; Lam, P.; Fertis, D.; Zeid, I.

1982-01-01

Second-year efforts within a three-year study to develop and extend finite element (FE) methodology to efficiently handle the transient/steady state response of rotor-bearing-stator structure associated with gas turbine engines are outlined. The two main areas aim at (1) implanting the squeeze film damper element into a general purpose FE code for testing and evaluation; and (2) determining the numerical characteristics of the FE-generated rotor-bearing-stator simulation scheme. The governing FE field equations are set out and the solution methodology is presented. The choice of ADINA as the general-purpose FE code is explained, and the numerical operational characteristics of the direct integration approach of FE-generated rotor-bearing-stator simulations is determined, including benchmarking, comparison of explicit vs. implicit methodologies of direct integration, and demonstration problems.

AERODYNAMIC AND BLADING DESIGN OF MULTISTAGE AXIAL FLOW COMPRESSORS

NASA Technical Reports Server (NTRS)

Crouse, J. E.

1994-01-01

The axial-flow compressor is used for aircraft engines because it has distinct configuration and performance advantages over other compressor types. However, good potential performance is not easily obtained. The designer must be able to model the actual flows well enough to adequately predict aerodynamic performance. This computer program has been developed for computing the aerodynamic design of a multistage axial-flow compressor and, if desired, the associated blading geometry input for internal flow analysis. The aerodynamic solution gives velocity diagrams on selected streamlines of revolution at the blade row edges. The program yields aerodynamic and blading design results that can be directly used by flow and mechanical analysis codes. Two such codes are TSONIC, a blade-to-blade channel flow analysis code (COSMIC program LEW-10977), and MERIDL, a more detailed hub-to-shroud flow analysis code (COSMIC program LEW-12966). The aerodynamic and blading design program can reduce the time and effort required to obtain acceptable multistage axial-flow compressor configurations by generating good initial solutions and by being compatible with available analysis codes. The aerodynamic solution assumes steady, axisymmetric flow so that the problem is reduced to solving the two-dimensional flow field in the meridional plane. The streamline curvature method is used for the iterative aerodynamic solution at stations outside of the blade rows. If a blade design is desired, the blade elements are defined and stacked within the aerodynamic solution iteration. The blade element inlet and outlet angles are established by empirical incidence and deviation angles to the relative flow angles of the velocity diagrams. The blade element centerline is composed of two segments tangentially joined at a transition point. The local blade angle variation of each element can be specified as a fourth-degree polynomial function of path distance. Blade element thickness can also be specified with fourth-degree polynomial functions of path distance from the maximum thickness point. Input to the aerodynamic and blading design program includes the annulus profile, the overall compressor mass flow, the pressure ratio, and the rotative speed. A number of input parameters are also used to specify and control the blade row aerodynamics and geometry. The output from the aerodynamic solution has an overall blade row and compressor performance summary followed by blade element parameters for the individual blade rows. If desired, the blade coordinates in the streamwise direction for internal flow analysis codes and the coordinates on plane sections through blades for fabrication drawings may be stored and printed. The aerodynamic and blading design program for multistage axial-flow compressors is written in FORTRAN IV for batch execution and has been implemented on an IBM 360 series computer with a central memory requirement of approximately 470K of 8 bit bytes. This program was developed in 1981.

Exhaust gas cleaning catalysts and method of producing same

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeoka, S.; Inaba, H.; Ichiki, M.

1976-02-17

Exhaust gas cleaning catalysts are produced by alloying copper and aluminum with at least one of the elements, nickel and chromium, and eluting by alkali or acid means aluminum from the cooled alloy surface. Small amounts of other metals from the fourth or fifth period V--VIII groups may be added to the catalysts by alloying, or by impregnation, for enhanced catalytic properties. The catalysts exhibit improved reduction of NO and oxidation of CO in an exhaust gas stream, in the presence of Pb, SO/sub 2/, moisture and hydrocarbons (HC) and at relatively low temperatures.

An investigation of several numerical procedures for time-asymptotic compressible Navier-Stokes solutions

NASA Technical Reports Server (NTRS)

Rudy, D. H.; Morris, D. J.; Blanchard, D. K.; Cooke, C. H.; Rubin, S. G.

1975-01-01

The status of an investigation of four numerical techniques for the time-dependent compressible Navier-Stokes equations is presented. Results for free shear layer calculations in the Reynolds number range from 1000 to 81000 indicate that a sequential alternating-direction implicit (ADI) finite-difference procedure requires longer computing times to reach steady state than a low-storage hopscotch finite-difference procedure. A finite-element method with cubic approximating functions was found to require excessive computer storage and computation times. A fourth method, an alternating-direction cubic spline technique which is still being tested, is also described.

KSC-08pd2049

NASA Image and Video Library

2008-07-21

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center, workers prepare to move the final solar array wing for the International Space Station for installation on the S6 truss element. Scheduled to launch on the STS-119 mission, space shuttle Discovery will carry the S6 truss segment to complete the 361-foot-long backbone of the International Space Station. The truss includes the fourth pair of solar array wings and electronics that convert sunlight to power for the orbiting laboratory. Launch is targeted for Feb. 12, 2009. Photo credit: NASA/Troy Cryder

[Teratoma and medulloblastoma of the cerebellum: a case].

PubMed

Boudawara, T; Boudawara, M Z; Sellami, M H; Ben Mansour, H; Jlidi, R

1999-01-01

The majority of intracranial teratoma are localized in pineal and sellar regions. In cerebellum, the teratoma is quite rare, the association with medulloblastoma is exceptional and was differentiated from medullomyoblastoma. We report one case of 5 years old boy with intracranial hypertension for 3 months. The cerebral computed tomography showed a tumor in the fourth ventricle. The histologic study of surgical specimens found a proliferation of component of medulloblastoma adjacent to mature teratoma with smooth and striated muscles, chondroid component, adipose tissue and epithelial elements. Our objective is to discuss the diagnosis, the hitogenesis and the prognosis of this tumor.

QIKAIM, a fast seminumerical algorithm for the generation of minute-of-arc accuracy satellite predictions

NASA Astrophysics Data System (ADS)

Vermeer, M.

1981-07-01

A program was designed to replace AIMLASER for the generation of aiming predictions, to achieve a major saving in computing time, and to keep the program small enough for use even on small systems. An approach was adopted that incorporated the numerical integration of the orbit through a pass, limiting the computation of osculating elements to only one point per pass. The numerical integration method which is fourth order in delta t in the cumulative error after a given time lapse is presented. Algorithms are explained and a flowchart and listing of the program are provided.

Large-acceptance diamond planar refractive lenses manufactured by laser cutting.

PubMed

Polikarpov, Maxim; Snigireva, Irina; Morse, John; Yunkin, Vyacheslav; Kuznetsov, Sergey; Snigirev, Anatoly

2015-01-01

For the first time, single-crystal diamond planar refractive lenses have been fabricated by laser micromachining in 300 µm-thick diamond plates which were grown by chemical vapour deposition. Linear lenses with apertures up to 1 mm and parabola apex radii up to 500 µm were manufactured and tested at the ESRF ID06 beamline. The large acceptance of these lenses allows them to be used as beam-conditioning elements. Owing to the unsurpassed thermal properties of single-crystal diamond, these lenses should be suitable to withstand the extreme flux densities expected at the planned fourth-generation X-ray sources.

Fusion materials semiannual progress report for the period ending June 30, 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burn, G.

1998-09-01

This is the twenty-fourth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Giant cemento-ossifying fibroma of the mandible

PubMed Central

Naik, Raghavendra Mahadev; Guruprasad, Yadavalli; Sujatha, D; Gurudath, Shubha; Pai, Anuradha; Suresh, KV

2014-01-01

Cemento-ossifying fibroma (COF) is classified as a fibro-osseous neoplasm and included among the non-odontogenic tumors derived from the mesenchymal blast cells of the periodontal ligament, with a potential for forming fibrous tissue, cementum and bone, or a combination of such elements. These are slow-growing lesions, and are more frequent in women between the third and fourth decades of life. Case reports of massive expansile COF, measuring more than 10 cm are rarely reported in the literature. We report a case of giant cemento-ossifying fibroma of the mandible in a 34 year old female patient. PMID:24678226

Giant cemento-ossifying fibroma of the mandible.

PubMed

Naik, Raghavendra Mahadev; Guruprasad, Yadavalli; Sujatha, D; Gurudath, Shubha; Pai, Anuradha; Suresh, Kv

2014-01-01

Cemento-ossifying fibroma (COF) is classified as a fibro-osseous neoplasm and included among the non-odontogenic tumors derived from the mesenchymal blast cells of the periodontal ligament, with a potential for forming fibrous tissue, cementum and bone, or a combination of such elements. These are slow-growing lesions, and are more frequent in women between the third and fourth decades of life. Case reports of massive expansile COF, measuring more than 10 cm are rarely reported in the literature. We report a case of giant cemento-ossifying fibroma of the mandible in a 34 year old female patient.

Model Systems for the Epitaxial Growth and Capping of GaAs

DTIC Science & Technology

1980-01-01

calculated from the data in Stull and Sinks 20 . This is the origin of the comon procedure of set- ting the As 4 partial pressure nearly equal to one fourth of...Techniques". 3. Cryst. Growth. 31 (1975), pp. 122-129. 20. Stull , D.R. and G.C. Sinke. "Thermodynamic Properties of the Elements". Am. Chem. Soc. Advances...System". Jep. J. AppI. Physics. (1972), pp. 855-a9. 48. Ashen, D.J., P.J. Dean , D.T.J. Hurl*, 3.1. Mullen, A. Boyle, and A.M. White. ’The

Medical student use of communication elements and association with patient satisfaction: a prospective observational pilot study.

PubMed

Turner, Joseph S; Pettit, Katie E; Buente, Bryce B; Humbert, Aloysius J; Perkins, Anthony J; Kline, Jeffrey A

2016-05-21

Effective communication with patients impacts clinical outcome and patient satisfaction. We measure the rate at which medical students use six targeted communication elements with patients and association of element use with patient satisfaction. Participants included fourth year medical students enrolled in an emergency medicine clerkship. A trained observer measured use of six communication elements: acknowledging the patient by name, introducing themselves by name, identifying their role, explaining the care plan, explaining that multiple providers would see the patient, and providing an estimated duration of time in the emergency department. The observer then conducted a survey of patient satisfaction with the medical student encounter. A total of 246 encounters were documented among forty medical student participants. For the six communication elements evaluated, in 61% of encounters medical students acknowledged the patient, in 91% they introduced themselves, in 58 % they identified their role as a student, in 64% they explained the care plan, in 80% they explained that another provider would see the patient, and in only 6% they provided an estimated duration of care. Only 1 encounter (0.4%) contained all six elements. Patients' likelihood to refer a loved one to that ED was increased when students acknowledged the patient and described that other providers would be involved in patient care (P = 0.016 and 0.015 respectively, Chi Square). Likewise, patients' likelihood to return to the ED was increased when students described their role in patient care (P = 0.035, Chi Square). This pilot study demonstrates that medical students infrequently use all targeted communication elements. When they did use certain elements, patient satisfaction increased. These data imply potential benefit to additional training for students in patient communication.

Dandy–Walker malformation: An incidental finding

PubMed Central

Tadakamadla, Jyothi; Kumar, Santhosh; Mamatha, G. P.

2010-01-01

Dandy–Walker malformation (DWM) is a rare intracranial congenital abnormality that affects the cerebellum and some of its components; particularly cerebellar vermis, fourth ventricle and is characterized by an enlarged posterior fossa. Although there is an extensive list of signs attributed to DWM, final diagnosis is solely dependent on imaging techniques as there are no signs that are characteristic of DWM. This article reports a case with DWM who was diagnosed by magnetic resonance imaging. PMID:20838490

Mortality in Female War Veterans of Operations Enduring Freedom and Iraqi Freedom

DTIC Science & Technology

2011-03-10

characteristics. Despite a similar prevalence of wounds between gen- ders, we found female service members’ death rates while serving in the combat theater...compare injury mechanism, distributions, and severities. We therefore cannot assume that demographic data or other confounders do not influence the death ... rates . Fourth, we are unable to report on specific job descriptions held by our cohort of females to study the link between the job and injury

Rare earth elements in sinters from the geothermal waters (hot springs) on the Tibetan Plateau, China

NASA Astrophysics Data System (ADS)

Feng, Jin-Liang; Zhao, Zhen-Hong; Chen, Feng; Hu, Hai-Ping

2014-10-01

The mineralogical and geochemical composition of sinters from the geothermal areas on the Tibetan Plateau was determined. They occur as siliceous, salty and calcareous sinters but biogenic siliceous sinters were also found. The analyses indicate that there are no distinct inter -element relationships between individual rare earth elements (REEs) and other elements. Formed from the same geothermal water, the mineralogical and chemical composition of the sinters is influenced by their genesis and formation conditions. The REE distributions depend on the origin of the sinters. Fe-Mn phases in sinters tend to scavenge more REEs from geothermal water. Neither the REE fractionation nor the Ce anomaly seems to be associated with Fe-Mn phases in the sinters. The fourth tetrads of some sinters display weak W-type (concave) effects. In contrast, the third tetrads present large effects in some sinters due to positive Gd anomalies. The origin of the positive Eu anomalies in some sinters seems to be caused by preferential dissolution of feldspars during water-rock interaction. The complexing ligands in geothermal water may contribute significantly to the fractionation of REEs in sinters. The dominant CO32- and HCO3- complexing in geothermal water favors enrichment of heavy REEs in calcareous sinters.

Student responses to the introduction of case-based learning and practical activities into a theoretical obstetrics and gynaecology teaching programme

PubMed Central

Massonetto, Júlio Cesar; Marcellini, Cláudio; Assis, Paulo Sérgio Ribeiro; de Toledo, Sérgio Floriano

2004-01-01

Background The fourth-year Obstetrics and Gynaecology course at our institution had previously been taught using theory classes alone. A new teaching model was introduced to provide a better link with professional practice. We wished to evaluate the impact of the introduction of case discussions and other practical activities upon students' perceptions of the learning process. Methods Small-group discussions of cases and practical activities were introduced for the teaching of a fourth-year class in 2003 (Group II; 113 students). Comparisons were made with the fourth-year class of 2002 (Group I; 108 students), from before the new programme was introduced. Students were asked to rate their satisfaction with various elements of the teaching programme. Statistical differences in their ratings were analysed using the chi-square and Bonferroni tests. Results Group II gave higher ratings to the clarity of theory classes and lecturers' teaching abilities (p < 0.05) and lecturers' punctuality (p < 0.001) than did Group I. Group II had greater belief that the knowledge assessment tests were useful (p < 0.001) and that their understanding of the subject was good (p < 0.001) than did Group I. Group II gave a higher overall rating to the course (p < 0.05) than did Group I. However, there was no difference in the groups' assessments of the use made of the timetabled hours available for the subject or lecturers' concern for students' learning. Conclusions Students were very receptive to the new teaching model. PMID:15569385

An ultrastructural study on indirect injury of dental pulp caused by high-speed missile projectile to mandible in dogs.

PubMed

Ren, Changqun; Liu, Ruifeng; Tian, Lei; Chen, Peng; Zhou, Shuxia

2008-12-01

The aim of this study was to evaluate the characteristics of indirect injury of dental pulp caused by high-speed missile projectile to mandible in dogs. Eighteen dogs aged 12-13 months were divided equally into six groups (n = 3 in each group) with random allocation, then a high-speed missile projectile (a ball bearing of stainless steel, phi6.0 mm, 0.88 g) was shot at right mandible body (the wound tract was below the fourth premolar, 1 cm or so to the root tips) of each dog, but the teeth were not wounded directly. The dogs were killed 6 h (n = 3), 24 h (n = 3), 3 days (n = 3), 7 days (n = 3), 2 weeks (n = 3) and 4 weeks (n = 3) after the wound, respectively; then ultrastructural change of dental pulp of the fourth premolar and the second premolar of right mandible, and the second premolar of left mandible was observed through transmission electron microscope. The results showed that mean initial velocity of projectiles was 778.0 +/- 33.2 m s(-1) and mean projection energy was 266.1 +/- 19.1 J, which were in conformity with parameters of gunshot wound. On the wound side, dental pulp of the fourth mandibular premolar was injured seriously and irreversible necrosis happened in the end; yet, dental pulp of the second mandibular premolar was injured less seriously, reversibly; on the opposite side, dental pulp of the second mandibular premolar was injured slightly and temporarily. It may be concluded that there are several characteristics in indirect injury of dental pulp caused by high-speed missile projectile to dogs' mandible: the injured area is relatively extensive; traumatic degree decreases progressively and sharply with the distance to the wound tract increasing; ultrastructural change of nerval damage takes place in early stage after wound, etc.

Investigating the effect of characteristic x-rays in cadmium zinc telluride detectors under breast computerized tomography operating conditions

PubMed Central

Glick, Stephen J.; Didier, Clay

2013-01-01

A number of research groups have been investigating the use of dedicated breast computerized tomography (CT). Preliminary results have been encouraging, suggesting an improved visualization of masses on breast CT as compared to conventional mammography. Nonetheless, there are many challenges to overcome before breast CT can become a routine clinical reality. One potential improvement over current breast CT prototypes would be the use of photon counting detectors with cadmium zinc telluride (CZT) (or CdTe) semiconductor material. These detectors can operate at room temperature and provide high detection efficiency and the capability of multi-energy imaging; however, one factor in particular that limits image quality is the emission of characteristic x-rays. In this study, the degradative effects of characteristic x-rays are examined when using a CZT detector under breast CT operating conditions. Monte Carlo simulation software was used to evaluate the effect of characteristic x-rays and the detector element size on spatial and spectral resolution for a CZT detector used under breast CT operating conditions. In particular, lower kVp spectra and thinner CZT thicknesses were studied than that typically used with CZT based conventional CT detectors. In addition, the effect of characteristic x-rays on the accuracy of material decomposition in spectral CT imaging was explored. It was observed that when imaging with 50-60 kVp spectra, the x-ray transmission through CZT was very low for all detector thicknesses studied (0.5–3.0 mm), thus retaining dose efficiency. As expected, characteristic x-ray escape from the detector element of x-ray interaction increased with decreasing detector element size, approaching a 50% escape fraction for a 100 μm size detector element. The detector point spread function was observed to have only minor degradation with detector element size greater than 200 μm and lower kV settings. Characteristic x-rays produced increasing distortion in the spectral response with decreasing detector element size. If not corrected for, this caused a large bias in estimating tissue density parameters for material decomposition. It was also observed that degradation of the spectral response due to characteristic x-rays caused worsening precision in the estimation of tissue density parameters. It was observed that characteristic x-rays do cause some degradation in the spatial and spectral resolution of thin CZT detectors operating under breast CT conditions. These degradations should be manageable with careful selection of the detector element size. Even with the observed spectral distortion from characteristic x-rays, it is still possible to correctly estimate tissue parameters for material decomposition using spectral CT if accurate modeling is used. PMID:24187383

Factors affecting compliance and resistance to auditory command hallucinations: perceptions of a clinical population.

PubMed

Barrowcliff, Alastair L; Haddock, Gillian

2010-12-01

Elements of voice content and characteristics of a hallucinatory voice are considered to be associated with compliance and resistance to auditory command hallucinations. However, a need for further exploration of such features remains. To explore the associations across different types of commands (benign, self-harm, harm-other) with a range of symptom measures and a trait measure of expressed compliance with compliance to the most recent command and command hallucinations over the previous 28 days. Participants meeting Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV) criteria for schizophrenia or schizoaffective disorder, with auditory hallucinations in the previous 28 days were screened. Where commands were reported a full-assessment of positive symptoms, social-rank, beliefs about voices and trait compliance was completed. Compliance with the last self-harm command was associated with elevated voice malevolence, heightened symptom presentation and perceived consequences for non-compliance. Compliance with the last harm-other command was associated with elevated symptom severity, higher perceived consequences for non-compliance and higher levels of voice social rank. However, these associations were not maintained for compliance during the previous 28 days. Findings indicate the importance of identifying the content of commands, overall symptom severity and core variables associated with compliance to specific command categories. The temporal stability of established mediating variables needs further examination.

Solution of the flyby problem for large space debris at sun-synchronous orbits

NASA Astrophysics Data System (ADS)

Baranov, A. A.; Grishko, D. A.; Medvedevskikh, V. V.; Lapshin, V. V.

2016-05-01

the paper considers the flyby problem related to large space debris (LSD) objects at low earth orbits. The data on the overall dimensions of known last and upper stages of launch vehicles makes it possible to single out five compact groups of such objects from the NORAD catalog in the 500-2000 km altitude interval. The orbits of objects of each group have approximately the same inclinations. The features of the mutual distribution of the orbital planes of LSD objects in the group are shown in a portrait of the evolution of deviations of the right ascension of ascending nodes (RAAN). In the case of the first three groups (inclinations of 71°, 74°, and 81°), the straight lines of relative RAAN deviations of object orbits barely intersect each other. The fourth (83°) and fifth (97°-100°) LSD groups include a considerable number of objects whose orbits are described by straight lines (diagonals), which intersect other lines many times. The use of diagonals makes it possible to significantly reduce the temporal and total characteristic velocity expenditures required for object flybys, but it complicates determination of the flyby sequence. Diagonal solutions can be obtained using elements of graph theory. A solution to the flyby problem is presented for the case of group 5, formed of LSD objects at sun-synchronous orbits.

The selection criteria elements of X-ray optics system

NASA Astrophysics Data System (ADS)

Plotnikova, I. V.; Chicherina, N. V.; Bays, S. S.; Bildanov, R. G.; Stary, O.

2018-01-01

At the design of new modifications of x-ray tomography there are difficulties in the right choice of elements of X-ray optical system. Now this problem is solved by practical consideration, selection of values of the corresponding parameters - tension on an x-ray tube taking into account the thickness and type of the studied material. For reduction of time and labor input of design it is necessary to create the criteria of the choice, to determine key parameters and characteristics of elements. In the article two main elements of X-ray optical system - an x-ray tube and the detector of x-ray radiation - are considered. Criteria of the choice of elements, their key characteristics, the main dependences of parameters, quality indicators and also recommendations according to the choice of elements of x-ray systems are received.

In space no one can hear you scream, "That's anatomically inaccurate!"

NASA Astrophysics Data System (ADS)

Ambrogio, O.

2017-12-01

The Alien of the seminal series begun by director Ridley Scott (1979) possesses a fascinating combination of Terran vertebrate and invertebrate characteristics, not to mention a lot of Freudian symbolism. This talk will quickly review the Alien's characteristics, social behavior, and anatomy; make the argument that it is clearly more vertebrate than invertebrate; and describe some of the similarities between real-life organisms' structures and those of an acid-for-blood-bearing creature with a mouth inside a mouth and a complex life cycle. The alarming misuse of genetics and the laws of inheritance in the otherwise excellent fourth film, Alien Resurrection (1997), may or may not be discussed.

Characteristics of Matrix Metals in Which Fast Diffusion of Foreign Metallic Elements Occurs

NASA Astrophysics Data System (ADS)

Mae, Yoshiharu

2018-04-01

A few foreign elements are known to diffuse faster than the self-diffusion of the matrix metal. However, the characteristics of the matrix metal, which contribute to such fast diffusion remain unknown. In this study, the diffusion coefficients of various elements were plotted on a TC-YM diagram. The matrix metals that show fast diffusion are located in the low thermal conductivity range of the TC-YM diagram, while diffuser elements that undergo fast diffusion are mainly gulf elements such as Fe, Ni, Co, Cr, and Cu. The gulf elements are those that show the largest combination of thermal conductivity and Young's modulus. The great difference in the electron mobility between the matrix metal and diffuser elements generates a repulsive force between them, and the repulsive force—acting between the soft and large atoms of the matrix metal and the hard and small atoms of the diffuser elements—deforms the atoms of the matrix metal to open passageways for fast diffusion of diffuser elements.

High frequency dynamic engine simulation. [TF-30 engine

NASA Technical Reports Server (NTRS)

Schuerman, J. A.; Fischer, K. E.; Mclaughlin, P. W.

1977-01-01

A digital computer simulation of a mixed flow, twin spool turbofan engine was assembled to evaluate and improve the dynamic characteristics of the engine simulation to disturbance frequencies of at least 100 Hz. One dimensional forms of the dynamic mass, momentum and energy equations were used to model the engine. A TF30 engine was simulated so that dynamic characteristics could be evaluated against results obtained from testing of the TF30 engine at the NASA Lewis Research Center. Dynamic characteristics of the engine simulation were improved by modifying the compression system model. Modifications to the compression system model were established by investigating the influence of size and number of finite dynamic elements. Based on the results of this program, high frequency engine simulations using finite dynamic elements can be assembled so that the engine dynamic configuration is optimum with respect to dynamic characteristics and computer execution time. Resizing of the compression systems finite elements improved the dynamic characteristics of the engine simulation but showed that additional refinements are required to obtain close agreement simulation and actual engine dynamic characteristics.

The Diagnostic and Statistical Manual of Mental Disorders, fourth edition, text revision as an appropriate diagnostic for premature ejaculation.

PubMed

Shabsigh, Ridwan; Rowland, David

2007-09-01

The Diagnostic and Statistical Manual of Mental Disorders, fourth edition, text revision (DSM-IV-TR) criteria for premature ejaculation (PE) are multifactorial, and include concepts of latency, perceived control over ejaculation, and personal distress and interpersonal difficulty related to the condition. Recent publications have suggested that these criteria are not supported by empirical evidence, leading to the proposal that a PE diagnosis should be based solely on intravaginal ejaculatory latency time (IELT), while the presence of other factors (such as perceived lack of control over ejaculation) may be used to guide treatment decisions. To examine the evidence supporting the elements of the DSM-IV-TR criteria for PE. Literature searches on IELT, perceived control over ejaculation, and personal distress and interpersonal difficulty related to ejaculation. From a historical perspective, there has been a lack of large observational studies that evaluated the contributions of the DSM-IV-TR components in men with PE. However, recently performed large observational studies have generated data supporting the inclusion of perceived control over ejaculation and personal distress related to ejaculation in the definition of PE. Furthermore, emerging evidence indicates that a perceived lack of control over ejaculation is directly associated with elevated personal distress related to ejaculation and decreased satisfaction with sexual intercourse, while the effects of IELT on these parameters are indirect, and mediated by perceived control over ejaculation. A key advantage of the DSM-IV-TR approach to the diagnosis of PE is that it firmly links PE to a negative outcome for the patient, which is an element common to diagnostic criteria for other conditions, including depression, hypertension, and osteoporosis. This new evidence strongly suggests that the DSM-IV-TR criteria for PE encompass aspects of the condition that patients describe as important.

Effect of mechanical forces on finger nail curvature: an analysis of the effect of occupation on finger nails.

PubMed

Sano, Hitomi; Shionoya, Kaori; Ogawa, Rei

2014-04-01

We studied the relationship between mechanical force and nail curvature. The effect of different frequencies and strengths of mechanical force on nail curvature was assessed. In Study 1, 63 carpenters and 63 office workers were enrolled, and the configurations of their thumb nails were assessed by measuring the curve index (defined as nail height/width) and pinch strength. In Study 2, nail curvature and pinch strength of jazz bassists, who characteristically do not use the right fourth and fifth fingers but use the left fifth finger a lot, were compared. In Study 3, the thumb nail curvature and pinch strength of the dominant and nondominant sides of the 126 participants from Study 1 were compared. Study 1: Carpenters had a significantly lower mean thumb nail curve index and higher mean pinch strength. Study 2: The nails of the unused right fourth and fifth fingers were much more curved than the nails of the frequently used left fourth and fifth fingers. The pinch strength of the right fifth finger was much weaker than the pinch strength of the left fifth finger. Study 3: The dominant side had a significantly lower nail curve index and higher pinch strength. The frequency and strength of mechanical forces on finger nails significantly affect nail appearance. © 2014 by the American Society for Dermatologic Surgery, Inc. Published by Wiley Periodicals, Inc.

Perineal body length and perineal lacerations during delivery in primigravid patients

PubMed Central

Lane, T. Lance; Chung, Christopher P.; Yandell, Paul M.; Kuehl, Thomas J.

2017-01-01

This study assessed the relation between perineal body length and the risk of perineal laceration extending into the anal sphincter during vaginal delivery in primigravid patients at an institution with a low utilization of episiotomy. This was a prospective study of primigravid patients in active labor. Primigravid women with singleton pregnancies who were in the first stage of labor at 37 weeks gestation or greater were recruited, and the admitting physician measured the length of the perineal body. The degree of perineal laceration and other delivery characteristics were recorded. Data were analyzed using univariate analyses, receiver-operator curve analyses, and multiple logistic regression for factors associated with increased severity of vaginal lacerations. The perineal body length, duration of second stage of labor, type of delivery, and patient age were associated (P < 0.1) with third- and fourth-degree (severe) perineal lacerations in primigravid women using receiver-operator curve analysis. Using logistic regression, only the duration of second stage of labor and length of the perineal body were significant (P < 0.04) predictors of third- and fourth-degree lacerations, with odds ratios of 32 (1.3 to 807 as 95% CI) and 24 (1.3 to 456), respectively. Both a perineal body length of ≤3.5 cm and a duration of second stage of labor >99 minutes were associated with an increased risk of third- and fourth-degree lacerations in primigravid patients. PMID:28405063

Structural Model for the Effects of Environmental Elements on the Psychological Characteristics and Performance of the Employees of Manufacturing Systems

PubMed Central

Realyvásquez, Arturo; Maldonado-Macías, Aidé Aracely; García-Alcaraz, Jorge; Cortés-Robles, Guillermo; Blanco-Fernández, Julio

2016-01-01

This paper analyzes the effects of environmental elements on the psychological characteristics and performance of employees in manufacturing systems using structural equation modeling. Increasing the comprehension of these effects may help optimize manufacturing systems regarding their employees’ psychological characteristics and performance from a macroergonomic perspective. As the method, a new macroergonomic compatibility questionnaire (MCQ) was developed and statistically validated, and 158 respondents at four manufacture companies were considered. Noise, lighting and temperature, humidity and air quality (THAQ) were used as independent variables and psychological characteristics and employees’ performance as dependent variables. To propose and test the hypothetical causal model of significant relationships among the variables, a data analysis was deployed. Results found that the macroergonomic compatibility of environmental elements presents significant direct effects on employees’ psychological characteristics and either direct or indirect effects on the employees’ performance. THAQ had the highest direct and total effects on psychological characteristics. Regarding the direct and total effects on employees’ performance, the psychological characteristics presented the highest effects, followed by THAQ conditions. These results may help measure and optimize manufacturing systems’ performance by enhancing their macroergonomic compatibility and quality of life at work of the employees. PMID:26742054

Structural Model for the Effects of Environmental Elements on the Psychological Characteristics and Performance of the Employees of Manufacturing Systems.

PubMed

Realyvásquez, Arturo; Maldonado-Macías, Aidé Aracely; García-Alcaraz, Jorge; Cortés-Robles, Guillermo; Blanco-Fernández, Julio

2016-01-05

This paper analyzes the effects of environmental elements on the psychological characteristics and performance of employees in manufacturing systems using structural equation modeling. Increasing the comprehension of these effects may help optimize manufacturing systems regarding their employees' psychological characteristics and performance from a macroergonomic perspective. As the method, a new macroergonomic compatibility questionnaire (MCQ) was developed and statistically validated, and 158 respondents at four manufacture companies were considered. Noise, lighting and temperature, humidity and air quality (THAQ) were used as independent variables and psychological characteristics and employees' performance as dependent variables. To propose and test the hypothetical causal model of significant relationships among the variables, a data analysis was deployed. Results found that the macroergonomic compatibility of environmental elements presents significant direct effects on employees' psychological characteristics and either direct or indirect effects on the employees' performance. THAQ had the highest direct and total effects on psychological characteristics. Regarding the direct and total effects on employees' performance, the psychological characteristics presented the highest effects, followed by THAQ conditions. These results may help measure and optimize manufacturing systems' performance by enhancing their macroergonomic compatibility and quality of life at work of the employees.

7 CFR 29.6014 - Elements of quality.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Elements of quality. 29.6014 Section 29.6014... REGULATIONS TOBACCO INSPECTION Standards Definitions § 29.6014 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are...

7 CFR 29.6014 - Elements of quality.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Elements of quality. 29.6014 Section 29.6014... REGULATIONS TOBACCO INSPECTION Standards Definitions § 29.6014 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are...

7 CFR 29.6014 - Elements of quality.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Elements of quality. 29.6014 Section 29.6014... REGULATIONS TOBACCO INSPECTION Standards Definitions § 29.6014 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are...

7 CFR 29.6014 - Elements of quality.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Elements of quality. 29.6014 Section 29.6014... REGULATIONS TOBACCO INSPECTION Standards Definitions § 29.6014 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are...

7 CFR 29.6014 - Elements of quality.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Elements of quality. 29.6014 Section 29.6014... REGULATIONS TOBACCO INSPECTION Standards Definitions § 29.6014 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are...

[Comparative studies of the tridosha theory in Ayurveda and the theory of the four deranged elements in Buddhist medicine].

PubMed

Endo, J; Nakamura, T

1995-01-01

It has been said that the tridosha theory in Ayurveda originated from the theory of the three elements of the universe. The names of these three doshas, which are roughly equivalent to humour, are vata (wind), pitta (bile), and Kapha (phlegm), corresponding to the three elements of the universe: air, fire, and water. On the other hand, Buddhist medicine which has a close relation to Ayurveda is based on the theory of the four elements of the universe which includes the earth as well as the three elements mentioned above. Greek medicine on the other hand, is founded on the theory of the four humours, i.e. blood, yellow bile, black bile, and phlegm. Furthermore, even in Ayurveda, like in "Sushruta Samhita", the theory of the four humours can be found: this includes the above-mentioned tridosha plus blood as the fourth humour. "Timaios" by Plato also mentions this. We compared these various theories and pointed out that the tridosha theory had its origin in the theory of the four elements of the universe. The process of the formation of the tridosha theory is considered as follows: (1) "Earth" was segregated from the four elements of the universe owing to its solid properties, and was rearranged into the seven elements of the body called "dhatu"; and the other three elements. "water", "fire", and "air", were integrated as the tridosha theory, namely, the theory of the three humours, owing to their properties of fluid; (2) "Blood", assigned to the element of "earth", was segregated from the tridosha because "blood" was considered to be comprised of the properties of every humour without having its own peculiar properties. Therefore, the diseases caused by deranged "blood" were regarded as an aggregate disease caused by the other three deranged humours. Then the category of the disease, caused by deranged "earth", did not appear.

Finite Element Analysis (FEA) in Design and Production.

ERIC Educational Resources Information Center

Waggoner, Todd C.; And Others

1995-01-01

Finite element analysis (FEA) enables industrial designers to analyze complex components by dividing them into smaller elements, then assessing stress and strain characteristics. Traditionally mainframe based, FEA is being increasingly used in microcomputers. (SK)

A review of the distribution coefficients of trace elements in soils: influence of sorption system, element characteristics, and soil colloidal properties.

PubMed

Shaheen, Sabry M; Tsadilas, Christos D; Rinklebe, Jörg

2013-12-01

Knowledge about the behavior and reactions of separate soil components with trace elements (TEs) and their distribution coefficients (Kds) in soils is a key issue in assessing the mobility and retention of TEs. Thus, the fate of TEs and the toxic risk they pose depend crucially on their Kd in soil. This article reviews the Kd of TEs in soils as affected by the sorption system, element characteristics, and soil colloidal properties. The sorption mechanism, determining factors, favorable conditions, and competitive ions on the sorption and Kd of TEs are also discussed here. This review demonstrates that the Kd value of TEs does not only depend on inorganic and organic soil constituents, but also on the nature and characteristics of the elements involved as well as on their competition for sorption sites. The Kd value of TEs is mainly affected by individual or competitive sorption systems. Generally, the sorption in competitive systems is lower than in mono-metal sorption systems. More strongly sorbed elements, such as Pb and Cu, are less affected by competition than mobile elements, such as Cd, Ni, and Zn. The sorption preference exhibited by soils for elements over others may be due to: (i) the hydrolysis constant, (ii) the atomic weight, (iii) the ionic radius, and subsequently the hydrated radius, and (iv) its Misono softness value. Moreover, element concentrations in the test solution mainly affect the Kd values. Mostly, values of Kd decrease as the concentration of the included cation increases in the test solution. Additionally, the Kd of TEs is controlled by the sorption characteristics of soils, such as pH, clay minerals, soil organic matter, Fe and Mn oxides, and calcium carbonate. However, more research is required to verify the practical utilization of studying Kd of TEs in soils as a reliable indicator for assessing the remediation process of toxic metals in soils and waters. © 2013 Elsevier B.V. All rights reserved.

Trace element abundances of high-MgO glasses from Kilauea, Mauna Loa and Haleakala volcanoes, Hawaii

USGS Publications Warehouse

Wagner, T.P.; Clague, D.A.; Hauri, E.H.; Grove, T.L.

1998-01-01

We performed an ion-microprobe study of eleven high-MgO (6.7-14.8 wt%) tholeiite glasses from the Hawaiian volcanoes Kilauea, Mauna Loa and Haleakala. We determined the rare earth (RE), high field strength, and other selected trace element abundances of these glasses, and used the data to establish their relationship to typical Hawaiian shield tholeiite and to infer characteristics of their source. The glasses have trace element abundance characteristics generally similar to those of typical shield tholeiites, e.g. L(light)REE/H(heavy)REE(C1) > 1. The Kilauea and Mauna Loa glasses, however, display trace and major element characteristics that cross geochemical discriminants observed between Kilauea and Mauna Loa shield lavas. The glasses contain a blend of these discriminating chemical characteristics, and are not exactly like the typical shield lavas from either volcano. The production of these hybrid magmas likely requires a complexly zoned source, rather than two unique sources. When corrected for olivine fractionation, the glass data show correlations between CaO concentration and incompatible trace element abundances, indicating that CaO may behave incompatibly during melting of the tholeiite source. Furthermore, the tholeiite source must contain residual garnet and clinopyroxene to account for the variation in trace element abundances of the Kilauea glasses. Inversion modeling indicates that the Kilauea source is flat relative to C1 chondrites, and has a higher bulk distribution coefficient for the HREE than the LREE.

Development of a transition pathway model using three traditional variables to describe the main structural characteristics of a forest stand type, size, and density

Treesearch

Chad Larson

2006-01-01

The Central Hardwood Region is a unique forest region in the United States, encompassing 340 million acres of land, of which 100 million acres are forested (Parker 1993). The region contains one-fourth of the U.S. population, with approximately 90 percent of the land in private ownership (Parker 1993). In general, private forested lands in the Central Hardwood Region...

A Longitudinal Study of Growth and Development and the Incidence of Physical Defects at Ages 9 and 10. A Progress Report to the Bernard van Leer Foundation on the Growth and Development Study of the Mt. Druitt Longitudinal Study.

ERIC Educational Resources Information Center

Clark, Anne; O'Brien, Peter

A longitudinal comparative study was made of the physical growth and development of Australian fourth-grade students from low, medium, and high socioeconomic groups. Specific questions addressed were (1) Do children differing in socioeconomic status differ in anthropometric characteristics and incidence of physical defects? (2) What is the…

Diagnostic Health Monitoring System Development for Army Vehicle Reliability

DTIC Science & Technology

2011-07-01

19-24 3.4 Receiver Operator Characteristics for fault detection ……………………….. 24-28 3.5 Extended diagnostic speed bump modal data analysis...extended diagnostic speed bump was akin to the use of modal impact testing for exciting broadband frequency ranges in mechanical systems for use in...for a front axle wheel crossing measured using long cleat for ( ) first 30, ( ) second 11, ( ) third 11, ( ) fourth 11, and ( ) fifth 11 data series

Data-based control of a multi-step forming process

NASA Astrophysics Data System (ADS)

Schulte, R.; Frey, P.; Hildenbrand, P.; Vogel, M.; Betz, C.; Lechner, M.; Merklein, M.

2017-09-01

The fourth industrial revolution represents a new stage in the organization and management of the entire value chain. However, concerning the field of forming technology, the fourth industrial revolution has only arrived gradually until now. In order to make a valuable contribution to the digital factory the controlling of a multistage forming process was investigated. Within the framework of the investigation, an abstracted and transferable model is used to outline which data have to be collected, how an interface between the different forming machines can be designed tangible and which control tasks must be fulfilled. The goal of this investigation was to control the subsequent process step based on the data recorded in the first step. The investigated process chain links various metal forming processes, which are typical elements of a multi-step forming process. Data recorded in the first step of the process chain is analyzed and processed for an improved process control of the subsequent process. On the basis of the gained scientific knowledge, it is possible to make forming operations more robust and at the same time more flexible, and thus create the fundament for linking various production processes in an efficient way.

Clinical Pharmacy Education in Japan: Using Simulated Patients in Laboratory-Based Communication-Skills Training before Clinical Practice.

PubMed

Kubota, Rie; Shibuya, Kiyoshi; Tanaka, Yoichi; Aoki, Manahito; Shiomi, Megumi; Ando, Wataru; Otori, Katsuya; Komiyama, Takako

2018-06-01

The Japanese pharmaceutical curriculum was extended from four to six years in 2006. Students now receive practical communication-skills training in their fourth year, before progressing to train in hospital and community pharmacies in their fifth year. Kitasato University School of Pharmacy, Tokyo, had established a program to meet these aims before the 2006 guidance. In the present study, we discuss and evaluate the features of this communication-skills training program. This study enrolled 242 fourth-year pharmacy students at Kitasato University. Students filled out a questionnaire survey after completing the laboratory element of their undergraduate education. As part of training, students were asked to obtain patient data from a model medical chart, before performing simulated patient interviews covering hospital admission and patient counseling. These simulations were repeated in a small group, and feedback was provided to students by both the simulated patient and the faculty after each presentation. It was found that students were able to develop their communication skills through this approach. Thus, an effective system of gradual and continuous training has been developed, which allows students to acquire clinical and practical communication skills.

Hepatitis B virus nuclear export elements: RNA stem-loop α and β, key parts of the HBV post-transcriptional regulatory element.

PubMed

Lim, Chun Shen; Brown, Chris M

2016-09-01

Many viruses contain RNA elements that modulate splicing and/or promote nuclear export of their RNAs. The RNAs of the major human pathogen, hepatitis B virus (HBV) contain a large (~600 bases) composite cis-acting 'post-transcriptional regulatory element' (PRE). This element promotes expression from these naturally intronless transcripts. Indeed, the related woodchuck hepadnavirus PRE (WPRE) is used to enhance expression in gene therapy and other expression vectors. These PRE are likely to act through a combination of mechanisms, including promotion of RNA nuclear export. Functional components of both the HBV PRE and WPRE are 2 conserved RNA cis-acting stem-loop (SL) structures, SLα and SLβ. They are within the coding regions of polymerase (P) gene, and both P and X genes, respectively. Based on previous studies using mutagenesis and/or nuclear magnetic resonance (NMR), here we propose 2 covariance models for SLα and SLβ. The model for the 30-nucleotide SLα contains a G-bulge and a CNGG(U) apical loop of which the first and the fourth loop residues form a CG pair and the fifth loop residue is bulged out, as observed in the NMR structure. The model for the 23-nucleotide SLβ contains a 7-base-pair stem and a 9-nucleotide loop. Comparison of the models with other RNA structural elements, as well as similarity searches of human transcriptome and viral genomes demonstrate that SLα and SLβ are specific to HBV transcripts. However, they are well conserved among the hepadnaviruses of non-human primates, the woodchuck and ground squirrel.

Hepatitis B virus nuclear export elements: RNA stem-loop α and β, key parts of the HBV post-transcriptional regulatory element

PubMed Central

Lim, Chun Shen; Brown, Chris M.

2016-01-01

ABSTRACT Many viruses contain RNA elements that modulate splicing and/or promote nuclear export of their RNAs. The RNAs of the major human pathogen, hepatitis B virus (HBV) contain a large (~600 bases) composite cis-acting 'post-transcriptional regulatory element' (PRE). This element promotes expression from these naturally intronless transcripts. Indeed, the related woodchuck hepadnavirus PRE (WPRE) is used to enhance expression in gene therapy and other expression vectors. These PRE are likely to act through a combination of mechanisms, including promotion of RNA nuclear export. Functional components of both the HBV PRE and WPRE are 2 conserved RNA cis-acting stem-loop (SL) structures, SLα and SLβ. They are within the coding regions of polymerase (P) gene, and both P and X genes, respectively. Based on previous studies using mutagenesis and/or nuclear magnetic resonance (NMR), here we propose 2 covariance models for SLα and SLβ. The model for the 30-nucleotide SLα contains a G-bulge and a CNGG(U) apical loop of which the first and the fourth loop residues form a CG pair and the fifth loop residue is bulged out, as observed in the NMR structure. The model for the 23-nucleotide SLβ contains a 7-base-pair stem and a 9-nucleotide loop. Comparison of the models with other RNA structural elements, as well as similarity searches of human transcriptome and viral genomes demonstrate that SLα and SLβ are specific to HBV transcripts. However, they are well conserved among the hepadnaviruses of non-human primates, the woodchuck and ground squirrel. PMID:27031749

NASA Engine Icing Research Overview: Aeronautics Evaluation and Test Capabilities (AETC) Project

NASA Technical Reports Server (NTRS)

Veres, Joseph P.

2015-01-01

The occurrence of ice accretion within commercial high bypass aircraft turbine engines has been reported by airlines under certain atmospheric conditions. Engine anomalies have taken place at high altitudes that have been attributed to ice crystal ingestion by the engine. The ice crystals can result in degraded engine performance, loss of thrust control, compressor surge or stall, and flameout of the combustor. The Aviation Safety Program at NASA has taken on the technical challenge of a turbofan engine icing caused by ice crystals which can exist in high altitude convective clouds. The NASA engine icing project consists of an integrated approach with four concurrent and ongoing research elements, each of which feeds critical information to the next element. The project objective is to gain understanding of high altitude ice crystals by developing knowledge bases and test facilities for testing full engines and engine components. The first element is to utilize a highly instrumented aircraft to characterize the high altitude convective cloud environment. The second element is the enhancement of the Propulsion Systems Laboratory altitude test facility for gas turbine engines to include the addition of an ice crystal cloud. The third element is basic research of the fundamental physics associated with ice crystal ice accretion. The fourth and final element is the development of computational tools with the goal of simulating the effects of ice crystal ingestion on compressor and gas turbine engine performance. The NASA goal is to provide knowledge to the engine and aircraft manufacturing communities to help mitigate, or eliminate turbofan engine interruptions, engine damage, and failures due to ice crystal ingestion.

Development of simulation techniques suitable for the analysis of air traffic control situations and instrumentation

NASA Technical Reports Server (NTRS)

1972-01-01

A terminal area simulation is described which permits analysis and synthesis of current and advanced air traffic management system configurations including ground and airborne instrumentation and new and modified aircraft characteristics. Ground elements in the simulation include navigation aids, surveillance radars, communication links, air-route structuring, ATC procedures, airport geometries and runway handling constraints. Airborne elements include traffic samples with individual aircraft performance and operating characteristics and aircraft navigation equipment. The simulation also contains algorithms for conflict detection, conflict resolution, sequencing and pilot-controller data links. The simulation model is used to determine the sensitivities of terminal area traffic flow, safety and congestion to aircraft performance characteristics, avionics systems, and other ATC elements.

Chemical characteristics and origin of H chondrite regolith breccias

NASA Technical Reports Server (NTRS)

Lipschutz, M. E.; Biswas, S.; Mcsween, H. Y., Jr.

1983-01-01

Petrologic data and contents of Ag, Bi, Cd, Co, Cs, Ga, In, Rb, Se, Te, Tl and Zn-trace elements spanning the volatility/mobility range-in light and dark portions of H chondrite regolith breccias and L chondrite fragmental breccias are reported. The chemical/petrologic characteristics of H chondrite regolith breccias differ from those of nonbrecciated chondrites or fragmental breccias. Petrologic characteristics and at least some trace element contents of H chondrite regolith breccias reflect primary processes; contents of the most volatile/mobile elements may reflect either primary or secondary processing, possibly within layered H chondrite parent object(s). Chemical/petrologic differences existed in different regions of the parent(s). Regoligh formation and gardening and meteoroid compaction were not so severe as to alter compositions markedly.

A conceptual framework of clinical nursing care in intensive care.

PubMed

da Silva, Rafael Celestino; Ferreira, Márcia de Assunção; Apostolidis, Thémistoklis; Brandão, Marcos Antônio Gomes

2015-01-01

to propose a conceptual framework for clinical nursing care in intensive care. descriptive and qualitative field research, carried out with 21 nurses from an intensive care unit of a federal public hospital. We conducted semi-structured interviews and thematic and lexical content analysis, supported by Alceste software. the characteristics of clinical intensive care emerge from the specialized knowledge of the interaction, the work context, types of patients and nurses characteristic of the intensive care and care frameworks. the conceptual framework of the clinic's intensive care articulates elements characteristic of the dynamics of this scenario: objective elements regarding technology and attention to equipment and subjective elements related to human interaction, specific of nursing care, countering criticism based on dehumanization.

SENS-5D trajectory and wind-sensitivity calculations for unguided rockets

NASA Technical Reports Server (NTRS)

Singh, R. P.; Huang, L. C. P.; Cook, R. A.

1975-01-01

A computational procedure is described which numerically integrates the equations of motion of an unguided rocket. Three translational and two angular (roll discarded) degrees of freedom are integrated through the final burnout; and then, through impact, only three translational motions are considered. Input to the routine is: initial time, altitude and velocity, vehicle characteristics, and other defined options. Input format has a wide range of flexibility for special calculations. Output is geared mainly to the wind-weighting procedure, and includes summary of trajectory at burnout, apogee and impact, summary of spent-stage trajectories, detailed position and vehicle data, unit-wind effects for head, tail and cross winds, coriolis deflections, range derivative, and the sensitivity curves (the so called F(Z) and DF(Z) curves). The numerical integration procedure is a fourth-order, modified Adams-Bashforth Predictor-Corrector method. This method is supplemented by a fourth-order Runge-Kutta method to start the integration at t=0 and whenever error criteria demand a change in step size.

Eco-friendly synthesis of silver nanoparticles and its larvicidal property against fourth instar larvae of Aedes aegypti.

PubMed

Ali, Zainal Abidin; Roslan, Muhammad Aidil; Yahya, Rosiyah; Wan Sulaiman, Wan Yusoff; Puteh, Rustam

2017-03-01

In this study, larvicidal activity of silver nanoparticles (AgNPs) synthesised using apple extract against fourth instar larvae of Aedes aegypti was determined. As a result, the AgNPs showed moderate larvicidal effects against Ae. aegypti larvae (LC 50  = 15.76 ppm and LC 90  = 27.7 ppm). In addition, comparison of larvicidal activity performance of AgNPs at high concentration prepared using two different methods showed that Ae. aegypti larvae was fully eliminated within the duration of 2.5 h. From X-ray diffraction, the AgNP crystallites were found to exhibit face centred cubic structure. The average size of these AgNPs as estimated by particle size distribution was in the range of 50-120 nm. The absorption maxima of the synthesised Ag showed characteristic Ag surface plasmon resonance peak. This green synthesis provides an economic, eco-friendly and clean synthesis route to Ag.

7 CFR 29.2266 - Elements of quality.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Elements of quality. 29.2266 Section 29.2266... 21) § 29.2266 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are shown in the chart in § 29.2351. ...

7 CFR 29.2266 - Elements of quality.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Elements of quality. 29.2266 Section 29.2266... 21) § 29.2266 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are shown in the chart in § 29.2351. ...

7 CFR 29.2266 - Elements of quality.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Elements of quality. 29.2266 Section 29.2266... 21) § 29.2266 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are shown in the chart in § 29.2351. ...

7 CFR 29.2266 - Elements of quality.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Elements of quality. 29.2266 Section 29.2266... 21) § 29.2266 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are shown in the chart in § 29.2351. ...

7 CFR 29.2266 - Elements of quality.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Elements of quality. 29.2266 Section 29.2266... 21) § 29.2266 Elements of quality. Physical characteristics used to determine the quality of tobacco. Words selected to describe degrees within each element are shown in the chart in § 29.2351. ...

Multiple reinjections and crystal mush compaction in the solidification evolution of the Karaj Dam basement Sill, Northern Iran

NASA Astrophysics Data System (ADS)

Maghdour-Mashhour, Reza; Shabani, Amir Ali Tabbakh

2017-07-01

The Karaj Dam basement Sill is a 460 m-thick saucer shaped sill, situated in the Alborz Magmatic Belt, Northern Iran. The results of geochemical, textural and field relations reveal characteristics of a sill with a well-developed S-shaped compositional profile which could be subdivided into distinct parts and suggest that the sill was repeatedly split and reinjected with fresh magma in the upper half of the previous emplacements (over- to partly intra-accretion). Whole rock and mineral compositional profiles have recorded five to six discrete injections of magma, each of which individually show an upward increase in terms of primitivity which represents partial crystallization in feeder conduits. The first three small successive pulses of magma, emplaced in the basal 150 m of the floor sequence, were followed by voluminous fourth and fifth pulses in the upper portion of the sill. During final two pulses the system acts as a closed system for each independently, and evolves through compositional convection or compaction aided in-situ crystallization. Theoretical models for convection and compaction shows the significance of both processes. Considering the final porosity of 0.1 < φ < 0.45, calculated convective velocities (0.2 < Vc < 227 m/year) are higher than the calculated crystal accumulation rate of the basal 150 m and upper portion of the sill (Va = 1 and 0.1 m/year), when the crystal mush varies between 1 to 0.01 m with the liquid viscosity ranging from 85 to 15 Pa·s. Our calculations further indicate that compaction driven velocity of liquid expulsion (ω - w) hardly exceeds the Va in the basal 150 m of the floor sequence. The highest velocity is reached (ω - w = 1 m/year) only if the crystal mush thickness is no less than 240 m with the porosity of 0.6 and the liquid viscosity of no more than 15 Pa·s. On the other hand, compaction is highly effective in the upper portion of the sill. Transfer of residual liquid from the compacting lower solidification front to the dilating upper solidification front resulted in characteristic chemical and mineralogical effects, such as the depletion of the lower half of the sill and the enrichment of the sandwich zone in incompatible elements and modal granophyre. Crystallization of the fourth pulse of magma produced a peak in incompatible clement concentrations at a sandwich horizon located at the 410 m level, where the floor and roof of the sill appeared to converge at this stage. Subsequent to the time of this enriched zone crystallizing, the fifth pulse of magma was emplaced near this level and inflated the chamber vertically for 200 m. Cumulus material containing interstitial melt and subsequent buoyancy driven upward transport of interstitial melt in this pulse concentrated incompatible elements at 47 m below the main peak, at the stratigraphic height of 360-370 m. The boundaries between the successive pulses were cryptic and represent a gradational contact in terms of grain size, chemical composition and crystallization sequence. This implies a short time interval between the emplacements of the magma. This sill is comparable with Antarctica Beacon Sill and Hudson River Palisades Sill, and the recognition of evidence for reinjection and compaction in these macroscopically uniform sills, as well as the Karaj Dam basement Sill, suggests that these processes may be common in the construction of sills with a thickness of more than 100 m.

The elemental move characteristic of nickel-based alloy in molten salt corrosion by using nuclear microprobe

NASA Astrophysics Data System (ADS)

Lei, Qiantao; Liu, Ke; Gao, Jie; Li, Xiaolin; Shen, Hao; Li, Yan

2017-08-01

Nickel-based alloys as candidate materials for Thorium Molten Salt Reactor (TMSR), need to be used under high temperature in molten salt environment. In order to ensure the safety of the reactor running, it is necessary to study the elemental move characteristic of nickel-based alloys in the high temperature molten salts. In this work, the scanning nuclear microprobe at Fudan University was applied to study the elemental move. The Nickel-based alloy samples were corroded by molten salt at different temperatures. The element concentrations in the Nickel-based alloys samples were determined by the scanning nuclear microprobe. Micro-PIXE results showed that the element concentrations changed from the interior to the exterior of the alloy samples after the corrosion.

Performance analysis and material dependence of micro holographic optical elements as couplers for fiber optic communication

NASA Astrophysics Data System (ADS)

Ambadiyil, Sajan; Prasannan, G.; Sathyan, Jithesh; Ajith Kumar, P. T.

2005-01-01

Holographic Optical Elements (HOEs) are gaining much importance and finding newer and better applications in areas of optical fiber communication and optical information processing systems. In contrast to conventional HOEs, optical communication and information systems require smaller and efficient elements of desired characteristics and transfer functions. Such Micro Holographic Optical Elements (MHOEs) can either be an HOE, recorded with two narrow beams of laser light or a segment cut from a larger HOE (SHOEs), and recorded in the conventional manner. In this study, micro holographic couplers, having specific focusing and diffraction characteristics were recorded in different holographic recording media such as silver halide and dichromated gelatin. Wavelength response of the elements was tested at 633 nm and 442 nm. Variation in diffraction efficiency/coupling factor, and insertion loss of the elements were studied. The paper reports in detail about the above results and related design considerations.

Modeling of wave processes in blocky media with porous and fluid-saturated interlayers

NASA Astrophysics Data System (ADS)

Sadovskii, Vladimir M.; Sadovskaya, Oxana V.; Lukyanov, Alexander A.

2017-09-01

The wave processes in blocky media are analyzed by applying different mathematical models, wherein the elastic blocks interact with each other via pliant interlayers with the complex mechanical properties. Four versions of constitutive equations are considered. In the first version, an elastic interaction between the blocks is simulated within the framework of linear elasticity theory, and the model of elastic-plastic interlayers is constructed to take into account the appearance of irreversible deformation of interlayers at short time intervals. In the second one, the effects of viscoelastic shear in the interblock interlayers are taken into the consideration using the Poynting-Thomson rheological scheme. In the third option, the model of an elastic porous material is used in the interlayers, where the pores collapse if an abrupt compressive stress is applied. In the fourth case, the model of a fluid-saturated material with open pores is examined based on Biot's equations. The collapse of pores is modeled by the generalized rheological approach, wherein the mechanical properties of a material are simulated using four rheological elements. Three of them are the traditional elastic, viscous and plastic elements, the fourth element is the so-called rigid contact, which is used to describe the behavior of materials with the different resistance to tension and compression. It was shown that the thermodynamically consistent model is provided, which means that the energy balance equation is fulfilled for an entire blocky structure, where the kinetic and potential energy of the system is the sum of the kinetic and potential energies of the blocks and interlayers. Under numerical implementation of the interlayers models, the dissipationless finite difference Ivanov's method was used. The splitting method by spatial variables in the combination with the Godunov gap decay scheme was applied in the blocks. As a result, robust and stable computational algorithms are built and tested. Using MPI technology, the parallel software was designed for the modeling of wave processes in 2D setting. The numerical results are presented, discussed and future studies are outlined.

Assessing country-level efforts to link research to action.

PubMed Central

Lavis, John N.; Lomas, Jonathan; Hamid, Maimunah; Sewankambo, Nelson K.

2006-01-01

We developed a framework for assessing country-level efforts to link research to action. The framework has four elements. The first element assesses the general climate (how those who fund research, universities, researchers and users of research support or place value on efforts to link research to action). The second element addresses the production of research (how priority setting ensures that users' needs are identified and how scoping reviews, systematic reviews and single studies are undertaken to address these needs). The third element addresses the mix of four clusters of activities used to link research to action. These include push efforts (how strategies are used to support action based on the messages arising from research), efforts to facilitate "user pull" (how "one-stop shopping" is provided for optimally packaged high-quality reviews either alone or as part of a national electronic library for health, how these reviews are profiled during "teachable moments" such as intense media coverage, and how rapid-response units meet users' needs for the best research), "user pull" efforts undertaken by those who use research (how users assess their capacity to use research and how structures and processes are changed to support the use of research) and exchange efforts (how meaningful partnerships between researchers and users help them to jointly ask and answer relevant questions). The fourth element addresses approaches to evaluation (how support is provided for rigorous evaluations of efforts to link research to action). PMID:16917649

Hybrid DG/FV schemes for magnetohydrodynamics and relativistic hydrodynamics

NASA Astrophysics Data System (ADS)

Núñez-de la Rosa, Jonatan; Munz, Claus-Dieter

2018-01-01

This paper presents a high order hybrid discontinuous Galerkin/finite volume scheme for solving the equations of the magnetohydrodynamics (MHD) and of the relativistic hydrodynamics (SRHD) on quadrilateral meshes. In this approach, for the spatial discretization, an arbitrary high order discontinuous Galerkin spectral element (DG) method is combined with a finite volume (FV) scheme in order to simulate complex flow problems involving strong shocks. Regarding the time discretization, a fourth order strong stability preserving Runge-Kutta method is used. In the proposed hybrid scheme, a shock indicator is computed at the beginning of each Runge-Kutta stage in order to flag those elements containing shock waves or discontinuities. Subsequently, the DG solution in these troubled elements and in the current time step is projected onto a subdomain composed of finite volume subcells. Right after, the DG operator is applied to those unflagged elements, which, in principle, are oscillation-free, meanwhile the troubled elements are evolved with a robust second/third order FV operator. With this approach we are able to numerically simulate very challenging problems in the context of MHD and SRHD in one, and two space dimensions and with very high order polynomials. We make convergence tests and show a comprehensive one- and two dimensional testbench for both equation systems, focusing in problems with strong shocks. The presented hybrid approach shows that numerical schemes of very high order of accuracy are able to simulate these complex flow problems in an efficient and robust manner.

The Australian baby bonus maternity payment and birth characteristics in Western Australia.

PubMed

Einarsdóttir, Kristjana; Langridge, Amanda; Hammond, Geoffrey; Gunnell, Anthony S; Haggar, Fatima A; Stanley, Fiona J

2012-01-01

The Australian baby bonus maternity payment introduced in 2004 has been reported to have successfully increased fertility rates in Australia. We aimed to investigate the influence of the baby bonus on maternal demographics and birth characteristics in Western Australia (WA). This study included 200,659 birth admissions from WA during 2001-2008, identified from administrative birth and hospital data-systems held by the WA Department of Health. We estimated average quarterly birth rates after the baby bonus introduction and compared them with expected rates had the policy not occurred. Rate and percentage differences (including 95% confidence intervals) were estimated separately by maternal demographics and birth characteristics. WA birth rates increased by 12.8% following the baby bonus implementation with the greatest increase being in mothers aged 20-24 years (26.3%, 95%CI = 22.0,30.6), mothers having their third (1.6%, 95%CI = 0.9,2.4) or fourth child (2.2%, 95%CI = 2.1,2.4), mothers living in outer regional and remote areas (32.4%, 95%CI = 30.2,34.6), mothers giving birth as public patients (1.5%, 95%CI = 1.3,1.8), and mothers giving birth in public hospitals (3.5%, 95%CI = 2.6,4.5). Interestingly, births to private patients (-4.3%, 95%CI = -4.8,-3.7) and births in private hospitals (-6.3%, 95%CI = -6.8,-5.8) decreased following the policy implementation. The introduction of the baby bonus maternity payment may have served as an incentive for women in their early twenties and mothers having their third or fourth child and may have contributed to the ongoing pressure and staff shortages in Australian public hospitals, particularly those in outer regional and remote areas.

M-Adapting Low Order Mimetic Finite Differences for Dielectric Interface Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGregor, Duncan A.; Gyrya, Vitaliy; Manzini, Gianmarco

2016-03-07

We consider a problem of reducing numerical dispersion for electromagnetic wave in the domain with two materials separated by a at interface in 2D with a factor of two di erence in wave speed. The computational mesh in the homogeneous parts of the domain away from the interface consists of square elements. Here the method construction is based on m-adaptation construction in homogeneous domain that leads to fourth-order numerical dispersion (vs. second order in non-optimized method). The size of the elements in two domains also di ers by a factor of two, so as to preserve the same value ofmore » Courant number in each. Near the interface where two meshes merge the mesh with larger elements consists of degenerate pentagons. We demonstrate that prior to m-adaptation the accuracy of the method falls from second to rst due to breaking of symmetry in the mesh. Next we develop m-adaptation framework for the interface region and devise an optimization criteria. We prove that for the interface problem m-adaptation cannot produce increase in method accuracy. This is in contrast to homogeneous medium where m-adaptation can increase accuracy by two orders.« less

Geomorphological hazards and environmental impact: Assessment and mapping

NASA Astrophysics Data System (ADS)

Panizza, Mario

In five sections the author develops the methods for the integration of geomorphological concepts into Environmental Impact and Mapping. The first section introduces the concepts of Impact and Risk through the relationships between Geomorphological Environment and Anthropical Element. The second section proposes a methodology for the determination of Geomorphological Hazard and the identification of Geomorphological Risk. The third section synthesizes the procedure for the compilation of a Geomorphological Hazards Map. The fourth section outlines the concepts of Geomorphological Resource Assessment for the analysis of the Environmental Impact. The fifth section considers the contribution of geomorphological studies and mapping in the procedure for Environmental Impact Assessment.

Laser-induced fluorescence spectrometer based on tunable color center laser for low-impurity-solution diagnostic and analysis

NASA Astrophysics Data System (ADS)

Basiev, Tasoltan T.; Fedorov, Vladimir V.; Karasik, Alexander Y.; Lin'kov, S. I.; Orlovskii, Yurii V.; Osiko, Vyacheslav V.; Panov, Vitaly A.; Prokhorov, Alexander M.; Vorob'ev, Ivan N.; Zverev, Peter G.

1996-11-01

Solid state (SS) tunable LiF:F2 color center laser with second and fourth harmonic generation for visible and ultra violet spectral ranges was developed for the laser induced fluorescence spectroscopy (LIFS). The construction and properties of excitation, registration and flame atomization systems for water solution diagnostic are discussed. The testing experiment with low iron concentrated water sample exhibits ultrahigh sensitivity which was estimated to be 0.05 ppb in our set-up. The SS LIFS spectrometer developed is usable to measure more than 42 metal elements in solution on the ppm, ppb level for various medical and biological applications.

Delta II SIRTF Liftoff

NASA Image and Video Library

2003-08-25

NASA's Space Infrared Telescope Facility (SIRTF) lifts off from Launch Pad 17-B, Cape Canaveral Air Force Station, on Aug. 25 at 1:35:39 a.m. EDT. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

Environmental apsects of the transuranics: a selected, annotated bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, F. M.; Sanders, C. T.; Talmage, S. S.

This fourth published bibliography of 528 references is from the computer information file built to provide support to the Nevada Applied Ecology Group (NAEG) of the AEC Nevada Operations Office. The general scope is environmental aspects of uranium and the transuranic elements, with a preponderance of material on plutonium. In addition, there are supporting materials involving basic ecology or general reviews on other nuclides that are entered at the request of the NAEG. References provide findings-oriented abstracts. Numerical data is referred to, in the comment field. Indexes are given for author, subject category, keywords, geographic location, permuted title, taxons, andmore » publication description.« less

Psychosocial Characteristics of Optimum Performance in Isolated and Confined Environments (ICE)

NASA Technical Reports Server (NTRS)

Palinkas, Lawrence A.; Keeton, Kathryn E.; Shea, Camille; Leveton, Lauren B.

2010-01-01

The Behavioral Health and Performance (BHP) Element addresses human health risks in the NASA Human Research Program (HRP), including the Risk of Adverse Behavioral Conditions and the Risk of Psychiatric Disorders. BHP supports and conducts research to help characteristics and mitigate the Behavioral Medicine risk for exploration missions, and in some instances, current Flight Medical Operations. The Behavioral Health and Performance (BHP) Element identified research gaps within the Behavioral Medicine Risk, including Gap BMed6: What psychosocial characteristics predict success in an isolated, confined environment (ICE)? To address this gap, we conducted an extensive and exhaustive literature review to identify the following: 1) psychosocial characteristics that predict success in ICE environments; 2) characteristics that are most malleable; and 3) specific countermeasures that could enhance malleable characteristics.

The distributed lambda (λ) model (DLM): a 3-D, finite-element muscle model based on Feldman's λ model; assessment of orofacial gestures.

PubMed

Nazari, Mohammad Ali; Perrier, Pascal; Payan, Yohan

2013-12-01

The authors aimed to design a distributed lambda model (DLM), which is well adapted to implement three-dimensional (3-D), finite-element descriptions of muscles. A muscle element model was designed. Its stress-strain relationships included the active force-length characteristics of the λ model along the muscle fibers, together with the passive properties of muscle tissues in the 3-D space. The muscle element was first assessed using simple geometrical representations of muscles in the form of rectangular bars. It was then included in a 3-D face model, and its impact on lip protrusion was compared with the impact of a Hill-type muscle model. The force-length characteristic associated with the muscle elements matched well with the invariant characteristics of the λ model. The impact of the passive properties was assessed. Isometric force variation and isotonic displacements were modeled. The comparison with a Hill-type model revealed strong similarities in terms of global stress and strain. The DLM accounted for the characteristics of the λ model. Biomechanically, no clear differences were found between the DLM and a Hill-type model. Accurate evaluations of the λ model, based on the comparison between data and simulations, are now possible with 3-D biomechanical descriptions of the speech articulators because of the DLM.

Pseudo-beam method for compressive buckling characteristics analysis of space inflatable load-carrying structures

NASA Astrophysics Data System (ADS)

Wang, Changguo; Tan, Huifeng; Du, Xingwen

2009-10-01

This paper extends Le van’s work to the case of nonlinear problem and the complicated configuration. The wrinkling stress distribution and the pressure effects are also included in our analysis. Pseudo-beam method is presented based on the inflatable beam theory to model the inflatable structures as a set of inflatable beam elements with a pre-stressed state. In this method, the discretized nonlinear equations are given based upon the virtual work principle with a 3-node Timoshenko’s beam model. Finite element simulation is performed by using a 3-node BEAM189 element incorporating ANSYS nonlinear program. The pressure effect is equivalent included in our method by modifying beam element cross-section parameters related to pressure. A benchmark example, the bending case of an inflatable cantilever beam, is performed to verify the accuracy of our proposed method. The comparisons reveal that the numerical results obtained with our method are close to open published analytical and membrane finite element results. The method is then used to evaluate the whole buckling and the load-carrying characteristics of an inflatable support frame subjected to a compression force. The wrinkling stress and region characteristics are also shown in the end. This method gives better convergence characteristics, and requires much less computation time. It is very effective to deal with the whole load-carrying ability analytical problems for large scale inflatable structures with complex configuration.

An interactive graphics system to facilitate finite element structural analysis

NASA Technical Reports Server (NTRS)

Burk, R. C.; Held, F. H.

1973-01-01

The characteristics of an interactive graphics systems to facilitate the finite element method of structural analysis are described. The finite element model analysis consists of three phases: (1) preprocessing (model generation), (2) problem solution, and (3) postprocessing (interpretation of results). The advantages of interactive graphics to finite element structural analysis are defined.

Examining school effectiveness at the fourth grade: A hierarchical analysis of the Third International Mathematics and Science Study (TIMSS)

NASA Astrophysics Data System (ADS)

Stemler, Steven Edward

This study explored school effectiveness in mathematics and science at the fourth grade using data from IEA's Third International Mathematics and Science Study (TIMSS). Fourteen of the 26 countries participating in TIMSS at the fourth grade possessed sufficient between-school variability in mathematics achievement to justify the creation of explanatory models of school effectiveness while 13 countries possessed sufficient between-school variability in science achievement. Exploratory models were developed using variables drawn from student, teacher, and school questionnaires. The variables were chosen to represent the domains of student involvement, instructional methods, classroom organization, school climate, and school structure. Six explanatory models for each subject were analyzed using two-level hierarchical linear modeling (HLM) and were compared to models using only school mean SES as an explanatory variable. The amount of variability in student achievement in mathematics attributable to differences between schools ranged from 16% in Cyprus to 56% in Latvia, while the amount of between-school variance in science achievement ranged from 12% in Korea to 59% in Latvia. In general, about one-quarter of the variability in mathematics and science achievement was found to lie between schools. The research findings revealed that after adjusting for differences in student backgrounds across schools, the most effective schools in mathematics and science had students who reported seeing a positive relationship between hard work, belief in their own abilities, and achievement. In addition, more effective schools had students who reported less frequent use of computers and calculators in the classroom. These relationships were found to be stable across explanatory models, cultural contexts, and subject areas. This study has contributed a unique element to the literature by examining school effectiveness at the fourth grade across two subject areas and across 14 different countries. The results indicate that further exploration of the relationship between school effectiveness and student locus of control warrants serious consideration. Future research on school effectiveness is recommended, perhaps using trend data and looking at different grade levels.

Steady-state analysis of a faulted three-phase four-wire system supplying induction motors with neutrals connected and other single-phase line-to-neutral loads

NASA Technical Reports Server (NTRS)

Wood, M. E.

1980-01-01

Four wire Wye connected ac power systems exhibit peculiar steady state fault characteristics when the fourth wire of three phase induction motors is connected. The loss of one phase of power source due to a series or shunt fault results in currents higher than anticipated on the remaining two phases. A theoretical approach to compute the fault currents and voltages is developed. A FORTRAN program is included in the appendix.

Combustion Characteristics of Hydrocarbon Droplets Induced by Photoignition of Aluminum Nanoparticles (Conference Paper with Briefing Charts)

DTIC Science & Technology

2017-04-23

192. 4. Chehroudi, B., Davis, D.W., and Talley, D.G., "The Effects of Pressure and Acoustic Field on a Cryogenic Coaxial Jet", 42nd AIAA Aerospace...the Presence of Acoustic Excitation", Combustion and Flame, 2014; 6, 161, pp. 1604-1619. 15. Glassman, I., and Yetter, R.A., Combustion: Fourth...pressure vessel. - Investigate combustion dynamics of nanofuel sprays under acoustic forcing at supercritical conditions (>600 psi). 3 DISTRIBUTION A

Mid-IR supercontinuum generation and applications: a review

NASA Astrophysics Data System (ADS)

Yin, Shizhuo; Ruffin, Paul; Brantley, Christina; Edwards, Eugene; Luo, Claire

2014-09-01

In this paper, a review on mid-IR supercontinuum generation (SCG) and its applications is presented. First, the physical mechanism of the supercontinuum generation in IR crystal fiber is introduced. Second, the recent progress on IR single crystal fiber, in particular ultrathin core double cladding IR single crystal fiber is described. Third, the transmission characteristics of mid-IR crystal fiber is illustrated. Fourth, the mid-IR supercontinuum generation in IR single crystal fiber is presented. Finally, the application of IR supercontinuum for smart target recognition is illustrated

Biomechanical analysis of suture locations of the distal plantar fascia in partial foot.

PubMed

Guo, Jun-Chao; Wang, Li-Zhen; Mo, Zhong-Jun; Chen, Wei; Fan, Yu-Bo

2015-12-01

The aim of this study was to evaluate the rationality of the suture locations of distal plantar fascia (DPF) after foot amputation to avoid the risk factors of re-amputation or plantar fasciitis. The tensile strain of plantar fascia (PF) in the different regions was measured by uni-axial tensile experiment. A three-dimensional (3D) finite element model was also developed to simulate tensile behaviour of PF in weight bearing conditions. The model includes 12 bones, ligaments, PF, cartilage and soft tissues. Four suture location models for the DPF were considered: the fourth and fifth DPF were sutured on the third metatarsal, the cuboid, and both the third metatarsal and the cuboid, and one un-sutured model. The peak tensile strain of the first, second and third PF was 0.134, 0.128 and 0.138 based on the mechanical test, respectively. The fourth and fifth DPF sutured at the cuboid and the third metatarsal could offer more favourable outcomes. The peak strain of 4.859 × 10(-2), 2.347 × 10(-2) and 1.364 × 10(-2) in the first, second and third PF showed the least outcomes in stance phase. Also, peak strain and stress of the residual PF reduced to 4.859 × 10(-2) and 1.834 MPa, respectively. The stress region was redistributed on the mid-shaft of the first and third PF and the peak stress of medial cuneiform bone evidently decreased. The fourth and fifth DPF suture at the third metatarsal and cuboid was appropriate for the partial foot. The findings are expected to suggest optimal surgical plan of the DPF suture and guide further therapeutic planning of partial foot patients.

Mixed garnet laser crystals for water vapour DIAL transmitter

NASA Astrophysics Data System (ADS)

Treichel, Rainer; Czeranowsky, Christoph; Ileri, Bilge; Petermann, Klaus; Huber, Günter

2017-11-01

There are more or less well established technologies such as the optical-parametric-oscillator (OPO), the Raman-laser, and the Ti-Sapphire laser, which are able to emit laser light in the region of the water vapour absorption lines. For WALES the regions of about 935 nm, 942 nm, and 944 nm have been identified as the most suitable wavelength ranges. However, each of these laser designs is highly sophisticated. Current baseline for WALES is the Ti-Sapphire laser. A fourth possibility to achieve these wavelength ranges is to shift the groundstate laser lines (938 nm and 946 nm) of the Nd:YAG laser by replacing Aluminium and Yttrium by other rare earth elements. Changes of the host lattice characteristics lead to a shift of the upper and lower laser levels. These modified crystals are summarized under the name of "Mixed Garnet" crystals. Only the Mixed Garnet lasers can be pumped directly with diode laser and use a direct approach to generate the required laser pulses without frequency conversion. Therefore no additional non-linear crystals are needed and a higher electric to optical efficiency is expected as well as single frequency operation using spectral tuning elements like etalons. Such lasers have the great potential to fulfil the requirements and to become the preferred transmitter concept for WALES as well as for follow up missions. Within a ESA study several crystal compositions have been grown, spectrally characterised and analysed. Absorbed space radiation energy in the crystal lattice causes colour centres, which can reabsorb the pump and laser wavelength and consequently reduce the laser gain considerably. Co-dopants such as Chromium and Cerium are able to suppress the colour centres and are candidates for effective radiation hardening. The results of the crystal tuning, the co-doping with different radiation hardeners and the radiation tests will be presented. There applicability for a space based water vapour DIAL transmitter will be discussed.

High-frequency lunar teleseismic events

NASA Technical Reports Server (NTRS)

Nakamura, Y.; Dorman, J.; Duennebier, F.; Ewing, M.; Lammlein, D.; Latham, G.

1974-01-01

A small number of seismic signals, including some of the strongest observed to date, have been identified as representing a fourth principal category of natural lunar seismic events with characteristics distinct from those produced by normal meteoroid impacts, deep moonquakes, and thermal moonquakes. These signals are much richer in high frequencies than other events observed at comparable distances, and display relatively impulsive P- and S-wave beginnings, indicating negligible seismic-wave scattering near the source. Source depths of these events may range between 0 and perhaps 300 km. These and other characteristics could represent either (1) meteoroids impacting upon outcrops of competent lunar crystal rock, (2) rare impacting objects that penetrate to competent rock below a scattering zone, or (3) shallow tectonic moonquakes.

Leaching behaviour of copper slag, construction and demolition waste and crushed rock used in a full-scale road construction.

PubMed

Lidelöw, Sofia; Mácsik, Josef; Carabante, Ivan; Kumpiene, Jurate

2017-12-15

The leaching behaviour of a road construction with fayalitic copper slag, recycled concrete and crushed rock as sub-base materials was monitored over ten years. All studied materials used in the road construction, including crushed rock, contained concentrations of several elements exceeding the guideline values recommended by the Swedish EPA for total element concentrations for waste materials used in constructions. Despite that, leaching from the road construction under field conditions in general was relatively low. The leachates from the recycled materials contained higher concentrations of several constituents than the leachates from the reference section with crushed rock. The leaching of the elements of interest (Cr, Mo, Ni, Zn) reached peak concentrations during the second and fourth (Cu) years and decreased over the observation period to levels below the Swedish recommended values. Carbonation of the concrete aggregates caused a substantial but short-term increase in the leaching of oxyanions such as chromate. The environmental risks related to element leaching are highest at the beginning of the road life. Ageing of materials or pre-treatment through leaching is needed prior to their use in construction to avoid peak concentrations. Also, the design of road constructions should be adjusted so that recycled materials are covered with low-permeability covers, which would minimize the exposure to atmospheric precipitation and weathering. Copyright © 2017 Elsevier Ltd. All rights reserved.

Numerical Analysis of a Radiant Heat Flux Calibration System

NASA Technical Reports Server (NTRS)

Jiang, Shanjuan; Horn, Thomas J.; Dhir, V. K.

1998-01-01

A radiant heat flux gage calibration system exists in the Flight Loads Laboratory at NASA's Dryden Flight Research Center. This calibration system must be well understood if the heat flux gages calibrated in it are to provide useful data during radiant heating ground tests or flight tests of high speed aerospace vehicles. A part of the calibration system characterization process is to develop a numerical model of the flat plate heater element and heat flux gage, which will help identify errors due to convection, heater element erosion, and other factors. A 2-dimensional mathematical model of the gage-plate system has been developed to simulate the combined problem involving convection, radiation and mass loss by chemical reaction. A fourth order finite difference scheme is used to solve the steady state governing equations and determine the temperature distribution in the gage and plate, incident heat flux on the gage face, and flat plate erosion. Initial gage heat flux predictions from the model are found to be within 17% of experimental results.

CCD Measurements of Double and Multiple Stars at NAO Rozhen and ASV in 2015

NASA Astrophysics Data System (ADS)

Cvetković, Z.; Pavlović, R.; Boeva, S.

2017-04-01

Results of CCD observations of 154 double or multiple stars, made with the 2 m telescope of the Bulgarian National Astronomical Observatory at Rozhen over five nights in 2015, are presented. This is the ninth series of measurements of CCD frames obtained at Rozhen. We also present results of CCD observations of 323 double or multiple stars made with the 0.6 m telescope of the Serbian Astronomical Station on the mountain of Vidojevica over 23 nights in 2015. This is the fourth series of measurements of CCD frames obtained at this station. This paper contains the results for the position angle and angular separation for 801 pairs and residuals for 127 pairs with published orbital elements or linear solutions. The angular separations are in the range from 1.″52 to 201.″56, with a median angular separation of 8.″26. We also present eight pairs that are measured for the first time and linear elements for five pairs.

Investigation of Buckling Phenomenon Induced by Growth of Vertebral Bodies Using a Mechanical Spine Model

NASA Astrophysics Data System (ADS)

Sasaoka, Ryu; Azegami, Hideyuki; Murachi, Shunji; Kitoh, Junzoh; Ishida, Yoshito; Kawakami, Noriaki; Makino, Mitsunori; Matsuyama, Yukihiro

A hypothesis that idiopathic scoliosis is a buckling phenomenon of the fourth or sixth mode, which is the second or third lateral bending mode, induced by the growth of vertebral bodies was presented in a previous paper by the authors using numerical simulations with a finite-element model of the spine. This paper presents experimental proof of the buckling phenomenon using mechanical spine models constructed with the geometrical data of the finite-element model used in a previous work. Using three spine mechanical models with different materials at intervertebral joints, the change in the natural vibration eigenvalue of the second lateral bending mode with the growth of vertebral bodies was measured by experimental modal analysis. From the result, it was observed that natural vibration eigenvalue decreased with the growth of vertebral bodies. Since the increase in primary factor inducing the buckling phenomenon decreases natural vibration eigenvalue, the obtained result confirms the buckling hypothesis.

Accuracy Study of the Space-Time CE/SE Method for Computational Aeroacoustics Problems Involving Shock Waves

NASA Technical Reports Server (NTRS)

Wang, Xiao Yen; Chang, Sin-Chung; Jorgenson, Philip C. E.

1999-01-01

The space-time conservation element and solution element(CE/SE) method is used to study the sound-shock interaction problem. The order of accuracy of numerical schemes is investigated. The linear model problem.govemed by the 1-D scalar convection equation, sound-shock interaction problem governed by the 1-D Euler equations, and the 1-D shock-tube problem which involves moving shock waves and contact surfaces are solved to investigate the order of accuracy of numerical schemes. It is concluded that the accuracy of the CE/SE numerical scheme with designed 2nd-order accuracy becomes 1st order when a moving shock wave exists. However, the absolute error in the CE/SE solution downstream of the shock wave is on the same order as that obtained using a fourth-order accurate essentially nonoscillatory (ENO) scheme. No special techniques are used for either high-frequency low-amplitude waves or shock waves.

Analysis of Personal and Home Characteristics Associated with the Elemental Composition of PM2.5 in Indoor, Outdoor, and Personal Air in the RIOPA Study.

PubMed

Ryan, Patrick H; Brokamp, Cole; Fan, Zhi-Hua; Rao, M B

2015-12-01

The complex mixture of chemicals and elements that constitute particulate matter (PM*) varies by season and geographic location because source contributors differ over time and place. The composition of PM having an aerodynamic diameter < 2.5 μm (PM2.5) is hypothesized to be responsible, in part, for its toxicity. Epidemiologic studies have identified specific components and sources of PM2.5 that are associated with adverse health outcomes. The majority of these studies use measures of outdoor concentrations obtained from one or a few central monitoring sites as a surrogate for measures of personal exposure. Personal PM2.5 (and its elemental composition), however, may be different from the PM2.5 measured at stationary outdoor sites. The objectives of this study were (1) to describe the relationships between the concentrations of various elements in indoor, outdoor, and personal PM2.5 samples, (2) to identify groups of individuals with similar exposures to mixtures of elements in personal PM2.5 and to examine personal and home characteristics of these groups, and (3) to evaluate whether concentrations of elements from outdoor PM2.5 samples are appropriate surrogates for personal exposure to PM2.5 and its elements and whether indoor PM2.5 concentrations and information about home characteristics improve the prediction of personal exposure. The objectives of the study were addressed using data collected as part of the Relationships of Indoor, Outdoor, and Personal Air (RIOPA) study. The RIOPA study has previously measured the mass concentrations of PM2.5 and its elemental constituents during 48-hour concurrent indoor, outdoor (directly outside the home), and personal samplings in three urban areas (Los Angeles, California; Houston, Texas; and Elizabeth, New Jersey). The resulting data and information about personal and home characteristics (including air-conditioning use, nearby emission sources, time spent indoors, census-tract geography, air-exchange rates, and other information) for each RIOPA participant were downloaded from the RIOPA study database. We performed three sets of analyses to address the study aims. First, we conducted descriptive analyses to describe the relationships between elemental concentrations in the concurrently gathered indoor, outdoor, and personal air samples. We assessed the correlation between personal exposure and indoor concentrations as well as personal exposure and outdoor concentrations of each element and calculated ratios between them. In addition, we performed principal component analysis (PCA) and calculated principal component scores (PCSs) to examine the heterogeneity of the elemental composition and then tested whether the mixture of elements in indoor, outdoor, and personal PM2.5 was significantly different within each study site and across study sites. Secondly, we performed model-based clustering analysis to group RIOPA participants with similar exposures to mixtures of elements in personal PM2.5. We examined the association between cluster membership and the concentrations of elements in indoor and outdoor PM2.5 samples and personal and home characteristics. Finally, we developed a series of linear regression models and random forest models to examine the association between personal exposure to elements in PM2.5 and (1) outdoor measurements, (2) outdoor and indoor measurements, and (3) outdoor and indoor measurements and home characteristics. As we developed each model, the improvement in prediction of personal exposure when including additional information was assessed. Personal exposures to PM2.5 and to most elements were significantly correlated with both indoor and outdoor concentrations, although concentrations in personal samples frequently exceeded those of indoor and outdoor samples. In general, for most PM2.5 elements indoor concentrations were more highly correlated with personal exposure than were outdoor concentrations. PCA showed that the mixture of elements in indoor, outdoor, and personal PM2.5 varied significantly across sample types within each study site and also across study sites within each sample type. Using model-based clustering, we identified seven clusters of RIOPA participants whose personal PM2.5 samples had similar patterns of elemental composition. Using this approach, subsets of RIOPA participants were identified whose personal exposures to PM2.5 (and its elements) were significantly higher than their indoor and outdoor concentrations (and vice versa). The results of linear and random forest regression models were consistent with our correlation analyses and demonstrated that (1) indoor concentrations were more significantly associated with personal exposure than were outdoor concentrations and (2) participant reports of time spent at their home significantly modified many of the associations between indoor and personal concentrations. In linear regression models, the inclusion of indoor concentrations significantly improved the prediction of personal exposures to Ba, Ca, Cl, Cu, K, Sn, Sr, V, and Zn compared with the use of outdoor elemental concentrations alone. Including additional information on personal and home characteristics improved the prediction for only one element, Pb. Our results support the use of outdoor monitoring sites as surrogates of personal exposure for a limited number of individual elements associated with long-range transport and with a few local or indoor sources. Based on our PCA and clustering analyses, we concluded that the overall elemental composition of PM2.5 obtained at outdoor monitoring sites may not accurately represent the elemental composition of personal PM2.5. Although the data used in these analyses compared outdoor PM2.5 composition collected at the home with indoor and personal samples, our results imply that studies examining the complete elemental composition of PM2.5 should be cautious about using data from central outdoor monitoring sites because of the potential for exposure misclassification. The inclusion of personal and home characteristics only marginally improved the prediction of personal exposure for a small number of elements in PM2.5. We concluded that the additional cost and burden of indoor and personal sampling may be justified for studies examining elements because neither outdoor monitoring nor questionnaire data on home and personal characteristics were able to represent adequately the overall elemental composition of personal PM2.5.

Adiposity, lipogenesis, and fatty acid composition of subcutaneous and intramuscular adipose tissues of Brahman and Angus crossbred cattle.

PubMed

Campbell, E M G; Sanders, J O; Lunt, D K; Gill, C A; Taylor, J F; Davis, S K; Riley, D G; Smith, S B

2016-04-01

The objective of this study was to demonstrate differences in aspects of adipose tissue cellularity, lipid metabolism, and fatty and cholesterol composition in Angus and Brahman crossbred cattle. We hypothesized that in vitro measures of lipogenesis would be greater in three-fourths Angus progeny than in three-fourths Brahman progeny, especially in intramuscular (i.m.) adipose tissue. Progeny ( = 227) were fed a standard, corn-based diet for approximately 150 d before slaughter. Breed was considered to be the effect of interest and was forced into the model. There were 9 breed groups including all 4 kinds of three-fourths Angus calves: Angus bulls Angus-sired F cows ( = 32), Angus bulls Brahman-sired F cows ( = 20), Brahman-sired F bulls Angus cows ( = 24), and Angus-sired F bulls Angus cows ( = 20). There were all 4 kinds of three-fourths Brahman calves: Brahman bulls Brahman-sired F cows ( = 21), Brahman bulls Angus-sired F cows ( = 43), Brahman-sired F bulls Brahman cows ( = 26), and Angus-sired F bulls Brahman cows ( = 13). Additionally, F calves (one-half Brahman and one-half Angus) were produced only from Brahman-sired F bulls Angus-sired F cows ( = 28). Contrasts were calculated when breed was an important fixed effect, using the random effect family(breed) as the error term. Most contrasts were nonsignificant ( > 0.10). Those that were significant ( < 0.05) included cholesterol concentration of subcutaneous (s.c.) adipose tissue (three-fourths Angus > F, three-fourths Brahman > F, and three-fourths crossbred progeny combined > F), s.c. adipocyte volume (three-fourths Angus > F and three-fourths bloods combined > F), lipogenesis from acetate in s.c. adipose tissue (three-fourths Brahman calves from Brahman dams > three-fourths Brahman calves from F dams), and percentage 18:3-3 in s.c. adipose tissue (three-fourths Brahman calves from Brahman-sired F dams < three-fourths Brahman calves from Angus-sired F dams). Intramuscular adipocyte volume ( < 0.001) was less in three-fourths Brahman cattle than in three-fourths Angus cattle. Additionally, several differences were observed in i.m. adipose tissue that were consistent with this being a less-developed adipose tissue in three-fourths Brahman cattle than in three-fourths Angus cattle.

Demand characteristics, pre-test attitudes and time-on-task trends in the effects of chewing gum on attention and reported mood in healthy volunteers.

PubMed

Allen, A P; Smith, A P

2012-10-01

Previous research has indicated that chewing gum enhances reported alertness, but has variable effects on attention. Demand characteristics may explain these effects. The current study investigated the effects of gum and demand characteristics on attention and reported mood over time. Participants completed measures of mood and attention, with and without chewing gum. To manipulate demand characteristics, they were told that the hypothesised effect of gum was either positive or negative, or no hypothesis was mentioned. Attitudes towards gum were assessed pre- and post-manipulation. Gum increased reported alertness; this effect was only significant for positive and neutral demand characteristics. Vigilance accuracy was reduced for chewing gum, but only in the fourth minute of the task, and gum reduced focussed attention accuracy, but only for the first 64 trials. Demand characteristics did not moderate time-on-task effects. Gum improved selective attention. A positive effect on response organisation was observed; this was significant when demand characteristics and pre-test attitudes to gum were both negative. The results suggest that demand characteristics moderate effects on self-reported alertness and response organisation, but cannot explain time-on-task effects or variable main effects on other aspects of attention. Copyright © 2012 Elsevier Ltd. All rights reserved.

Trace element geochemistry of Archean volcanic rocks

NASA Technical Reports Server (NTRS)

Jahn, B.-M.; Shih, C.-Y.; Murthy, V. R.

1974-01-01

The K, Rb, Sr, Ba and rare-earth-element contents of some Archean volcanic rocks from the Vermilion greenstone belt, northeast Minnesota, were determined by the isotopic dilution method. The characteristics of trace element abundances, supported by the field occurrences and major element chemistry, suggest that these volcanic rocks were formed in an ancient island arc system.

InSb charge coupled infrared imaging device: The 20 element linear imager

NASA Technical Reports Server (NTRS)

Thom, R. D.; Koch, T. L.; Parrish, W. J.; Langan, J. D.; Chase, S. C.

1980-01-01

The design and fabrication of the 8585 InSb charge coupled infrared imaging device (CCIRID) chip are reported. The InSb material characteristics are described along with mask and process modifications. Test results for the 2- and 20-element CCIRID's are discussed, including gate oxide characteristics, charge transfer efficiency, optical mode of operation, and development of the surface potential diagram.

Spatial analysis of precipitation time series over the Upper Indus Basin

NASA Astrophysics Data System (ADS)

Latif, Yasir; Yaoming, Ma; Yaseen, Muhammad

2018-01-01

The upper Indus basin (UIB) holds one of the most substantial river systems in the world, contributing roughly half of the available surface water in Pakistan. This water provides necessary support for agriculture, domestic consumption, and hydropower generation; all critical for a stable economy in Pakistan. This study has identified trends, analyzed variability, and assessed changes in both annual and seasonal precipitation during four time series, identified herein as: (first) 1961-2013, (second) 1971-2013, (third) 1981-2013, and (fourth) 1991-2013, over the UIB. This study investigated spatial characteristics of the precipitation time series over 15 weather stations and provides strong evidence of annual precipitation by determining significant trends at 6 stations (Astore, Chilas, Dir, Drosh, Gupis, and Kakul) out of the 15 studied stations, revealing a significant negative trend during the fourth time series. Our study also showed significantly increased precipitation at Bunji, Chitral, and Skardu, whereas such trends at the rest of the stations appear insignificant. Moreover, our study found that seasonal precipitation decreased at some locations (at a high level of significance), as well as periods of scarce precipitation during all four seasons. The observed decreases in precipitation appear stronger and more significant in autumn; having 10 stations exhibiting decreasing precipitation during the fourth time series, with respect to time and space. Furthermore, the observed decreases in precipitation appear robust and more significant for regions at high elevation (>1300 m). This analysis concludes that decreasing precipitation dominated the UIB, both temporally and spatially including in the higher areas.

Influence of mesh density, cortical thickness and material properties on human rib fracture prediction.

PubMed

Li, Zuoping; Kindig, Matthew W; Subit, Damien; Kent, Richard W

2010-11-01

The purpose of this paper was to investigate the sensitivity of the structural responses and bone fractures of the ribs to mesh density, cortical thickness, and material properties so as to provide guidelines for the development of finite element (FE) thorax models used in impact biomechanics. Subject-specific FE models of the second, fourth, sixth and tenth ribs were developed to reproduce dynamic failure experiments. Sensitivity studies were then conducted to quantify the effects of variations in mesh density, cortical thickness, and material parameters on the model-predicted reaction force-displacement relationship, cortical strains, and bone fracture locations for all four ribs. Overall, it was demonstrated that rib FE models consisting of 2000-3000 trabecular hexahedral elements (weighted element length 2-3mm) and associated quadrilateral cortical shell elements with variable thickness more closely predicted the rib structural responses and bone fracture force-failure displacement relationships observed in the experiments (except the fracture locations), compared to models with constant cortical thickness. Further increases in mesh density increased computational cost but did not markedly improve model predictions. A ±30% change in the major material parameters of cortical bone lead to a -16.7 to 33.3% change in fracture displacement and -22.5 to +19.1% change in the fracture force. The results in this study suggest that human rib structural responses can be modeled in an accurate and computationally efficient way using (a) a coarse mesh of 2000-3000 solid elements, (b) cortical shells elements with variable thickness distribution and (c) a rate-dependent elastic-plastic material model. Copyright © 2010 IPEM. Published by Elsevier Ltd. All rights reserved.

Is Pelvic-Floor Muscle Training a Physical Therapy or a Behavioral Therapy? A Call to Name and Report the Physical, Cognitive, and Behavioral Elements.

PubMed

Frawley, Helena C; Dean, Sarah G; Slade, Susan C; Hay-Smith, E Jean C

2017-04-01

This perspective article explores whether pelvic-floor muscle training (PFMT) for the management of female urinary incontinence and prolapse is a physical therapy or a behavioral therapy. The primary aim is to demonstrate that it is both. A secondary aim is to show that the plethora of terms used for PFMT is potentially confusing and that current terminology inadequately represents the full intent, content, and delivery of this complex intervention. While physical therapists may be familiar with exercise terms, the details are often incompletely reported; furthermore, physical therapists are less familiar with the terminology used in accurately representing cognitive and behavioral therapy interventions, which results in these elements being even less well reported. Thus, an additional aim is to provide greater clarity in the terminology used in the reporting of PFMT interventions, specifically, descriptions of the exercise and behavioral elements. First, PFMT is described as a physical therapy and as an exercise therapy informed predominantly by the discipline of physical therapy. However, effective implementation requires use of the cognitive and behavioral perspectives of the discipline of psychology. Second, the theoretical underpinning of the psychology-informed elements of PFMT is summarized. Third, to address some identified limitations and confusion in current terminology and reporting, recommendations for ways in which physical therapists can incorporate the psychology-informed elements of PFMT alongside the more familiar exercise therapy-informed elements are made. Fourth, an example of how both elements can be described and reported in a PFMT intervention is provided. In summary, this perspective explores the underlying concepts of PFMT to demonstrate that it is both a physical intervention and a behavioral intervention and that it can and should be described as such, and an example of the integration of these elements into clinical practice is provided. © 2017 American Physical Therapy Association.

Development of a morphing flap using shape memory alloy actuators: the aerodynamic characteristics of a morphing flap

NASA Astrophysics Data System (ADS)

Ko, Seung-Hee; Bae, Jae-Sung; Rho, Jin-Ho

2014-07-01

The discontinuous contour of a wing with conventional flaps diminishes the aerodynamic performance of an aircraft. A wing with a continuous contour does not experience extreme flow stream fluctuations during flight, and consequently has good aerodynamic characteristics. In this study, a morphing flap using shape memory alloy actuators is proposed, designed and fabricated, and its aerodynamic characteristics are investigated using aerodynamic analyses and wind tunnel tests. The ribs of the morphing flap are designed and fabricated with multiple elements joined together in a way that allows relative rotations of adjacent elements and forms a smooth contour of the morphing flap. The aerodynamic analyses of this multiple-element morphing-flap wing are performed using XFLR pro; its aerodynamic performance is compared with that of a mechanical-flap wing, and is measured through wind-tunnel tests.

Elemental composition and structural characteristics of as-received TriTaniumTM orthodontic archwire

NASA Astrophysics Data System (ADS)

Ilievska, I.; Petrov, V.; Mihailov, V.; Karatodorov, S.; Andreeva, L.; Zaleski, A.; Mikli, V.; Gueorgieva, M.; Petrova, V.; Stoyanova-Ivanova, A.

2018-03-01

Orthodontic archwires are among the most important devices of fixed orthodontic therapy. Many types of archwires are made available on the market by various manufacturers with different elemental composition and structural characteristics. Knowing this information is important when choosing a suitable archwire for a particular stage of orthodontic treatment. The aim of our study is to characterize a new type orthodontic archwires (TriTaniumTM, American Orthodontics) before their placement in the oral cavity. To achieve the aim, we used modern methods for determining their elemental composition and structural characteristics: laser-induced plasma spectroscopy (LIBS), X-ray diffraction analysis (XRD), scanning electronic microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and differential scanning calorimetry (DSC). The results obtained from the qualitative elemental analysis by LIBS and the quantitative elemental analysis by EDX showed that Ni and Ti are the main elements in the archwire studied. The room-temperature XRD patterns showed peaks typical for a Ni-Ti alloy with an austenite-type structure. Monitoring the phase transitions by means of DSC measurements in the temperature range from –50 °C to +50 °C, we showed that in TriTaniumTM archwires, besides the austenite to martensite transition, there exists a rhombohedral intermediate phase (R phase). This study will be useful in assisting orthodontists in applying appropriate nickel-titanium orthodontic archwires in the clinical practice.

Multi-Elements in Waters and Sediments of Shallow Lakes: Relationships with Water, Sediment, and Watershed Characteristics.

PubMed

Kissoon, La Toya T; Jacob, Donna L; Hanson, Mark A; Herwig, Brian R; Bowe, Shane E; Otte, Marinus L

2015-06-01

We measured concentrations of multiple elements, including rare earth elements, in waters and sediments of 38 shallow lakes of varying turbidity and macrophyte cover in the Prairie Parkland (PP) and Laurentian Mixed Forest (LMF) provinces of Minnesota. PP shallow lakes had higher element concentrations in waters and sediments compared to LMF sites. Redundancy analysis indicated that a combination of site- and watershed-scale features explained a large proportion of among-lake variability in element concentrations in lake water and sediments. Percent woodland cover in watersheds, turbidity, open water area, and macrophyte cover collectively explained 65.2 % of variation in element concentrations in lake waters. Sediment fraction smaller than 63 µm, percent woodland in watersheds, open water area, and sediment organic matter collectively explained 64.2 % of variation in element concentrations in lake sediments. In contrast to earlier work on shallow lakes, our results showed the extent to which multiple elements in shallow lake waters and sediments were influenced by a combination of variables including sediment characteristics, lake morphology, and percent land cover in watersheds. These results are informative because they help illustrate the extent of functional connectivity between shallow lakes and adjacent lands within these lake watersheds.

Multi-Elements in Waters and Sediments of Shallow Lakes: Relationships with Water, Sediment, and Watershed Characteristics

PubMed Central

Jacob, Donna L.; Hanson, Mark A.; Herwig, Brian R.; Bowe, Shane E.; Otte, Marinus L.

2015-01-01

We measured concentrations of multiple elements, including rare earth elements, in waters and sediments of 38 shallow lakes of varying turbidity and macrophyte cover in the Prairie Parkland (PP) and Laurentian Mixed Forest (LMF) provinces of Minnesota. PP shallow lakes had higher element concentrations in waters and sediments compared to LMF sites. Redundancy analysis indicated that a combination of site- and watershed-scale features explained a large proportion of among-lake variability in element concentrations in lake water and sediments. Percent woodland cover in watersheds, turbidity, open water area, and macrophyte cover collectively explained 65.2 % of variation in element concentrations in lake waters. Sediment fraction smaller than 63 µm, percent woodland in watersheds, open water area, and sediment organic matter collectively explained 64.2 % of variation in element concentrations in lake sediments. In contrast to earlier work on shallow lakes, our results showed the extent to which multiple elements in shallow lake waters and sediments were influenced by a combination of variables including sediment characteristics, lake morphology, and percent land cover in watersheds. These results are informative because they help illustrate the extent of functional connectivity between shallow lakes and adjacent lands within these lake watersheds. PMID:26074657

Correlation consistent valence basis sets for use with the Stuttgart-Dresden-Bonn relativistic effective core potentials: The atoms Ga-Kr and In-Xe

NASA Astrophysics Data System (ADS)

Martin, Jan M. L.; Sundermann, Andreas

2001-02-01

We propose large-core correlation-consistent (cc) pseudopotential basis sets for the heavy p-block elements Ga-Kr and In-Xe. The basis sets are of cc-pVTZ and cc-pVQZ quality, and have been optimized for use with the large-core (valence-electrons only) Stuttgart-Dresden-Bonn (SDB) relativistic pseudopotentials. Validation calculations on a variety of third-row and fourth-row diatomics suggest them to be comparable in quality to the all-electron cc-pVTZ and cc-pVQZ basis sets for lighter elements. Especially the SDB-cc-pVQZ basis set in conjunction with a core polarization potential (CPP) yields excellent agreement with experiment for compounds of the later heavy p-block elements. For accurate calculations on Ga (and, to a lesser extent, Ge) compounds, explicit treatment of 13 valence electrons appears to be desirable, while it seems inevitable for In compounds. For Ga and Ge, we propose correlation consistent basis sets extended for (3d) correlation. For accurate calculations on organometallic complexes of interest to homogenous catalysis, we recommend a combination of the standard cc-pVTZ basis set for first- and second-row elements, the presently derived SDB-cc-pVTZ basis set for heavier p-block elements, and for transition metals, the small-core [6s5p3d] Stuttgart-Dresden basis set-relativistic effective core potential combination supplemented by (2f1g) functions with exponents given in the Appendix to the present paper.

Trace elements in blood samples of smoker and nonsmoker active pulmonary tuberculosis patients from Jamshoro, Pakistan.

PubMed

Memon, Zainab Manzoor; Yilmaz, Erkan; Shah, Afsheen Mushtaque; Sahin, Ugur; Kazi, Tasneem Gul; Devrajani, Bikha Ram; Soylak, Mustafa

2017-12-01

Pulmonary tuberculosis (PTB) is a serious public threat throughout the world. PTB and smoking have a strong correlation. Malnutrition, poverty, addiction, overcrowding, illiteracy, unemployment, and poor hygienic conditions are the collective aspects for the disease progress. Pakistan is the fifth among 22 high tuberculosis (TB) burden countries and the fourth regarding multidrug-resistant tuberculosis (MDR-TB). The aim of study was to determine the concentration of essential and toxic elements from blood samples of smoker and nonsmoker PTB patients by inductively coupled plasma mass spectrometry (ICP-MS) followed by microwave acid digestion and compared with control subjects (n = 30). Eighty PTB patients were selected from different hospitals with age ranging 20-70 years. It was interpreted that the mean age among males and females was found to be 35.6 ± 1.4 and 33.5 ± 1.2, respectively, and the male patients were highly affected in contrast to females. Essential elements such as Mn, Fe, Zn, and Se were statistically found to be lower while Ca, Co, and Cu were found to be higher compared to the control group (p = 0.00). However, toxic elements like Al, Cr, Ni, As, Cd, and Pb were statistically elevated in smokers than nonsmokers. Further research is needed to understand the degree of the impact of essential trace elements on treatment outcome (follow-up) followed by balanced healthy nutritional supplementation along with medical therapy, consequently improving the pulmonary tuberculosis outcome and survival as well.

Neighborhood contextual characteristics and leisure-time physical activity: Pró-Saúde Study.

PubMed

Boclin, Karine de Lima Sírio; Faerstein, Eduardo; Leon, Antônio Carlos Monteiro Ponce de

2014-04-01

To estimate the association between neighborhood contextual variables and leisure-time physical activity. Data were analyzed for 2,674 adults from Rio de Janeiro, RJ, Southeastern Brazil, participating in the longitudinal study in 1999. Leisure-time physical activity in the two preceding weeks was assessed dichotomously. Sex, age, income, education and marital status were analyzed as individual variables. Neighborhood contextual characteristics were the social development index, the Theil index and the proportion of the area occupied by parks, squares and gardens, categorized in quintiles. The unadjusted and adjusted odds ratios and 95% confidence intervals were estimated using multilevel logistic regression. The prevalence of leisure-time physical activity was higher in residents in neighborhoods with higher indices of social development (between 32.3% and 53.1%) and a greater proportion of parks, squares and gardens (between 35.8% and 53.1%). Regarding the social development index, the adjusted odds ratios for physical activity were 1.22 (95%CI 0.93;1.61), 1.44 (95%CI 1.09;1.89), 1.75 (95%CI 1.31;2.34) and 2.25 (95%CI 1.70;3.00) for residents in neighborhoods in the second, third, fourth and fifth quintiles, respectively, compared with residents in neighborhoods in the first quintile. The odds ratios for the proportion of parks, squares and gardens were 0.90 (95%CI 0.69;1.19), 1.41 (95%CI 1.04;1.90), 1.63 (95%CI 1.24;2.14) and 1.05 (95%CI 0.80;1.38) for residents in neighborhoods in the second, third, fourth and fifth quintiles. After adjusting for the other variables, only the social development index continued to be associated with leisure-time physical activity, with odds ratios of 1.41 (95%CI 1.02;1.95); 1.54 (95%CI 1.12;2.12); 1.65 (95%CI 1.14;2.39) and 2.13 (95%CI 1.40;3.25) for residents in neighborhoods in the second, third, fourth and fifth quintiles. Leisure-time physical activity was more common in residents in neighborhoods with higher social development indices. No association was observed between access to leisure areas and income inequality.

Constitutive modeling for isotropic materials

NASA Technical Reports Server (NTRS)

Chan, K. S.; Lindholm, U. S.; Bodner, S. R.

1988-01-01

The third and fourth years of a 4-year research program, part of the NASA HOST Program, are described. The program goals were: (1) to develop and validate unified constitutive models for isotropic materials, and (2) to demonstrate their usefulness for structural analysis of hot section components of gas turbine engines. The unified models selected for development and evaluation were those of Bodner-Partom and of Walker. The unified approach for elastic-viscoplastic constitutive equations is a viable method for representing and predicting material response characteristics in the range where strain rate and temperature dependent inelastic deformations are experienced. This conclusion is reached by extensive comparison of model calculations against the experimental results of a test program of two high temperature Ni-base alloys, B1900+Hf and Mar-M247, over a wide temperature range for a variety of deformation and thermal histories including uniaxial, multiaxial, and thermomechanical loading paths. The applicability of the Bodner-Partom and the Walker models for structural applications has been demonstrated by implementing these models into the MARC finite element code and by performing a number of analyses including thermomechanical histories on components of hot sections of gas turbine engines and benchmark notch tensile specimens. The results of the 4-year program have been published in four annual reports. The results of the base program are summarized in this report. The tasks covered include: (1) development of material test procedures, (2) thermal history effects, and (3) verification of the constitutive model for an alternative material.

A constitutive model for the warp-weft coupled non-linear behavior of knitted biomedical textiles.

PubMed

Yeoman, Mark S; Reddy, Daya; Bowles, Hellmut C; Bezuidenhout, Deon; Zilla, Peter; Franz, Thomas

2010-11-01

Knitted textiles have been used in medical applications due to their high flexibility and low tendency to fray. Their mechanics have, however, received limited attention. A constitutive model for soft tissue using a strain energy function was extended, by including shear and increasing the number and order of coefficients, to represent the non-linear warp-weft coupled mechanics of coarse textile knits under uniaxial tension. The constitutive relationship was implemented in a commercial finite element package. The model and its implementation were verified and validated for uniaxial tension and simple shear using patch tests and physical test data of uniaxial tensile tests of four very different knitted fabric structures. A genetic algorithm with step-wise increase in resolution and linear reduction in range of the search space was developed for the optimization of the fabric model coefficients. The numerically predicted stress-strain curves exhibited non-linear stiffening characteristic for fabrics. For three fabrics, the predicted mechanics correlated well with physical data, at least in one principal direction (warp or weft), and moderately in the other direction. The model exhibited limitations in approximating the linear elastic behavior of the fourth fabric. With proposals to address this limitation and to incorporate time-dependent changes in the fabric mechanics associated with tissue ingrowth, the constitutive model offers a tool for the design of tissue regenerative knit textile implants. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Narratives of Self-Neglect: Patterns of Traumatic Personal Experiences and Maladaptive Behaviors in Cognitively Intact Older Adults.

PubMed

Lien, Cynthia; Rosen, Tony; Bloemen, Elizabeth M; Abrams, Robert C; Pavlou, Maria; Lachs, Mark S

2016-11-01

To identify patterns of personal experience or behavior in self-neglect by exploring narratives of cognitively intact older adults. Descriptive study involving semistructured interviews and unstructured narratives. A parent study of self-neglect characteristics. Cognitively intact, self-neglecting older adults referred from 11 community-based senior services agencies (N = 69). Interviews included a comprehensive psychiatric assessment using the Structured Clinical Interview for Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, Axis-I and II Disorders and an unstructured interview that allowed subjects to describe important elements of their life stories. Content analysis was used to identify personal experiences and behavior patterns in each subject's narrative. Four types of traumatic personal experiences (psychologically traumatic loss, separation or abandonment (29%); violent victimization, physical trauma, or sexual abuse (19%); exposure to war or political violence (9%); prolonged mourning (7%)) and five behavior patterns (significant financial instability (23%), severe lifelong mental illness (16%), mistrust of people or paranoia (13%), distrust and avoidance of the medical establishment (13%), substance abuse or dependence (13%)) were identified in the life stories. Patterns of traumatic personal experiences and maladaptive behaviors that self-neglecters frequently report were identified. Experiences, perceptions, and behaviors developed over a lifetime may contribute to elder self-neglect. Further exploration and better understanding of these patterns may identify potential risk factors and areas for future targeted screening, intervention, and prevention. © 2016, Copyright the Authors Journal compilation © 2016, The American Geriatrics Society.

IGRINS on the DCT

NASA Astrophysics Data System (ADS)

Prato, Lisa A.

2017-01-01

Through an agreement with the University of Texas at Austin and the Korea Astronomy and Space Science Institute, the Immersion Grating Infrared Spectrograph (IGRINS) saw first light on the Lowell Observatory 4.3 m Discovery Channel Telescope (DCT) telescope on September 8, 2016. IGRINS, originally commissioned at the McDonald Observatory 2.7 m telescope, provides a spectral resolution of 45,000 and a simultaneous spectral grasp of 1.45 to 2.45 microns, recording all of the H and K bands with no gaps in wavelength coverage on two H2RG detectors in a single exposure. The instrument design minimizes optical surfaces, optimizing throughput, and has no moving parts, key for stability. IGRINS on the DCT attains a signal to noise of 100 per resolution element in one hour of integration time on a K=12 magnitude source, currently making it the most sensitive high-resolution spectrograph in the world at H and K. Science programs in the fourth quarter, 2016, include such diverse topics as abundance measurements in M dwarfs and population II stars, studies of ices and atmospheres in outer solar system bodies, measurement of fundamental properties of pre-main sequence stars, calibrating young star evolution, defining the substellar boundary at the youngest ages, outflow characteristics in Wolf-Rayet stars, finding the first generation of exoplanets, gas dynamics in planetary nebulae, and structure of the ISM in molecular clouds. In this talk I will report on initial results from selected programs.

Nonpoint Source Monitoring

EPA Pesticide Factsheets

Water quality monitoring for nonpoint sources of pollution includes the important element of relating the physical, chemical, and biological characteristics of receiving waters to land use characteristics.

Development of Row of Vibration Insulators and its Mathematical Models on a Base of Common Multi-parameter Scheme of Element Axial Line

NASA Astrophysics Data System (ADS)

Ponomarev, Yury K.

2018-01-01

The mathematical model of deformation of a cable (rope) vibration insulator consisting of two identical clips connected by means of elastic elements of a complex axial line is developed in detail. The axial line of the element is symmetric relatively to the horizontal axis of the shape and is made up of five rectilinear sections of arbitrary length a, b, c, conjugated to four radius sections with parameters R1 and R2 with angular extent 90°. On the basis of linear representations of the theory of bending and torsion of mechanics of materials, applied mechanics and linear algebra, a mathematical model of loading of an element and a vibration insulator as a whole in the direction of the vertical Y axis has been developed. Generalized characteristics of the friction and elastic forces for an elastic element with a complete set of the listed sections are obtained. Further, with the help of nullification in the generalized model of the characteristics of certain parameters, special cases of friction and elastic forces are obtained without taking into account the nullified parameters. Simultaneously, on the basis of the 3D computer-aided design system, volumetric models of simplified structures were created, given in the work. It is shown that, with the help of a variation of the five parameters of the axial scheme of the element, in combination with the variation of the moment of inertia of the rope section and the number of elements entering the ensemble, the load characteristics and stiffness of the vibration insulators can be changed tens and hundreds of times. This opens up unlimited possibilities for the optimal design of vibration protection systems in terms of weight characteristics, in cost, in terms of vibration intensity, in overall dimensions in different directions, which is very important for aerospace and transport engineering.

Complexity and Productivity Differentiation Models of Metallogenic Indicator Elements in Rocks and Supergene Media Around Daijiazhuang Pb-Zn Deposit in Dangchang County, Gansu Province

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Jin-zhong, E-mail: viewsino@163.com; Yao, Shu-zhen; Zhang, Zhong-ping

2013-03-15

With the help of complexity indices, we quantitatively studied multifractals, frequency distributions, and linear and nonlinear characteristics of geochemical data for exploration of the Daijiazhuang Pb-Zn deposit. Furthermore, we derived productivity differentiation models of elements from thermodynamics and self-organized criticality of metallogenic systems. With respect to frequency distributions and multifractals, only Zn in rocks and most elements except Sb in secondary media, which had been derived mainly from weathering and alluviation, exhibit nonlinear distributions. The relations of productivity to concentrations of metallogenic elements and paragenic elements in rocks and those of elements strongly leached in secondary media can be seenmore » as linear addition of exponential functions with a characteristic weak chaos. The relations of associated elements such as Mo, Sb, and Hg in rocks and other elements in secondary media can be expressed as an exponential function, and the relations of one-phase self-organized geological or metallogenic processes can be represented by a power function, each representing secondary chaos or strong chaos. For secondary media, exploration data of most elements should be processed using nonlinear mathematical methods or should be transformed to linear distributions before processing using linear mathematical methods.« less

Construction of inorganic elemental fingerprint and multivariate statistical analysis of marine traditional Chinese medicine Meretricis concha from Rushan Bay

NASA Astrophysics Data System (ADS)

Wu, Xia; Zheng, Kang; Zhao, Fengjia; Zheng, Yongjun; Li, Yantuan

2014-08-01

Meretricis concha is a kind of marine traditional Chinese medicine (TCM), and has been commonly used for the treatment of asthma and scald burns. In order to investigate the relationship between the inorganic elemental fingerprint and the geographical origin identification of Meretricis concha, the elemental contents of M. concha from five sampling points in Rushan Bay have been determined by means of inductively coupled plasma optical emission spectrometry (ICP-OES). Based on the contents of 14 inorganic elements (Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se, and Zn), the inorganic elemental fingerprint which well reflects the elemental characteristics was constructed. All the data from the five sampling points were discriminated with accuracy through hierarchical cluster analysis (HCA) and principle component analysis (PCA), indicating that a four-factor model which could explain approximately 80% of the detection data was established, and the elements Al, As, Cd, Cu, Ni and Pb could be viewed as the characteristic elements. This investigation suggests that the inorganic elemental fingerprint combined with multivariate statistical analysis is a promising method for verifying the geographical origin of M. concha, and this strategy should be valuable for the authenticity discrimination of some marine TCM.

A high-order Lagrangian-decoupling method for the incompressible Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Ho, Lee-Wing; Maday, Yvon; Patera, Anthony T.; Ronquist, Einar M.

1989-01-01

A high-order Lagrangian-decoupling method is presented for the unsteady convection-diffusion and incompressible Navier-Stokes equations. The method is based upon: (1) Lagrangian variational forms that reduce the convection-diffusion equation to a symmetric initial value problem; (2) implicit high-order backward-differentiation finite-difference schemes for integration along characteristics; (3) finite element or spectral element spatial discretizations; and (4) mesh-invariance procedures and high-order explicit time-stepping schemes for deducing function values at convected space-time points. The method improves upon previous finite element characteristic methods through the systematic and efficient extension to high order accuracy, and the introduction of a simple structure-preserving characteristic-foot calculation procedure which is readily implemented on modern architectures. The new method is significantly more efficient than explicit-convection schemes for the Navier-Stokes equations due to the decoupling of the convection and Stokes operators and the attendant increase in temporal stability. Numerous numerical examples are given for the convection-diffusion and Navier-Stokes equations for the particular case of a spectral element spatial discretization.

[Boerhaave and medication].

PubMed

Lafont, Olivier

2011-01-01

Herman Boerhaave (1668-1738) was a well known physician from Leiden, who was essentially known in France for three of his books, which had been translated into French, and had much success during thel8th century, Elements of Chemistry, Aphorisms and Materia Medica. There was also a fourth book, the Treatise of the Virtue of Medicines redacted by his students from notes taken during his lessons, which was translated into French in 1729. This volume, in in-80 format, of 471 pages, did not meet with the same success as his other books. It is anyway very interesting, because it shows that Boerhaave, even if he were Professor of Chemistry, was not at all a iatrochemist but behaved as an iatromechanicist.

From Projectile Points to Microprocessors - The Influence of Some Industrial Minerals

USGS Publications Warehouse

Driscoll, Rhonda

2007-01-01

In the language of economic geology, Earth materials are classified as metallic ores, fuel minerals, gemstones, and industrial minerals. Most people know that metallic ores yield shiny, conductive, ductile elements such as copper, iron, or gold. Most understand that energy-producing coals constitute a fuel mineral. Likewise, dazzling rubies and rare sapphires are universally recognized as gemstones. The fourth group, industrial minerals, is largely unknown to the general public, even though industrial minerals are as essential to daily life as metals and fuel minerals. This report examines the occurrence and practical uses of nine important industrial minerals - constituting just a few of the more than 50 industrial minerals that shape human culture.

KSC-00pp1340

NASA Image and Video Library

2000-09-13

During pre-pack and fit check on his launch and entry suit, STS-92 Commander Brian Duffy adjusts his helmet. Duffy and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. This mission will be Duffy’s fourth Shuttle flight. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program

Delta II SIRTF Liftoff

NASA Image and Video Library

2003-08-25

NASA's Space Infrared Telescope Facility (SIRTF) is moments away from lift off from Launch Pad 17-B, Cape Canaveral Air Force Station, on Aug. 25. Launch is scheduled for 1:35:39 a.m. EDT. SIRTF will obtain images and spectra by detecting the infrared energy, or heat, radiated by objects in space. Consisting of a 0.85-meter telescope and three cryogenically cooled science instruments, SIRTF will be the largest infrared telescope ever launched into space. It is the fourth and final element in NASA’s family of orbiting “Great Observatories.” Its highly sensitive instruments will give a unique view of the Universe and peer into regions of space that are hidden from optical telescopes.

Applied Meteorology Unit (AMU) Quarterly Report Fourth Quarter FY-14

NASA Technical Reports Server (NTRS)

Bauman, William H.; Crawford, Winifred C.; Watson, Leela R.; Shafer, Jaclyn

2014-01-01

Ms. Crawford completed the final report for the dual-Doppler wind field task. Dr. Bauman completed transitioning the 915-MHz and 50-MHz Doppler Radar Wind Profiler (DRWP) splicing algorithm developed at Marshall Space Flight Center (MSFC) into the AMU Upper Winds Tool. Dr. Watson completed work to assimilate data into model configurations for Wallops Flight Facility (WFF) and Kennedy Space Center/Cape Canaveral Air Force Station (KSC/CCAFS). Ms. Shafer began evaluating the a local high-resolution model she had set up previously for its ability to forecast weather elements that affect launches at KSC/CCAFS. Dr. Watson began a task to optimize the data-assimilated model she just developed to run in real time.

DIP1 modulates stem cell homeostasis in Drosophila through regulation of sisR-1.

PubMed

Wong, Jing Ting; Akhbar, Farzanah; Ng, Amanda Yunn Ee; Tay, Mandy Li-Ian; Loi, Gladys Jing En; Pek, Jun Wei

2017-10-02

Stable intronic sequence RNAs (sisRNAs) are by-products of splicing and regulate gene expression. How sisRNAs are regulated is unclear. Here we report that a double-stranded RNA binding protein, Disco-interacting protein 1 (DIP1) regulates sisRNAs in Drosophila. DIP1 negatively regulates the abundance of sisR-1 and INE-1 sisRNAs. Fine-tuning of sisR-1 by DIP1 is important to maintain female germline stem cell homeostasis by modulating germline stem cell differentiation and niche adhesion. Drosophila DIP1 localizes to a nuclear body (satellite body) and associates with the fourth chromosome, which contains a very high density of INE-1 transposable element sequences that are processed into sisRNAs. DIP1 presumably acts outside the satellite bodies to regulate sisR-1, which is not on the fourth chromosome. Thus, our study identifies DIP1 as a sisRNA regulatory protein that controls germline stem cell self-renewal in Drosophila.Stable intronic sequence RNAs (sisRNAs) are by-products of splicing from introns with roles in embryonic development in Drosophila. Here, the authors show that the RNA binding protein DIP1 regulates sisRNAs in Drosophila, which is necessary for germline stem cell homeostasis.

High-resolution sequence stratigraphy and continental environmental evolution: An example from east-central Argentina

NASA Astrophysics Data System (ADS)

Beilinson, Elisa; Veiga, Gonzalo D.; Spalletti, Luis A.

2013-10-01

The aims of this contribution is to establish a high-resolution sequence stratigraphic scheme for the continental deposits that constitute the Punta San Andrés Alloformation (Plio-Pleistocene) in east-central Argentina, to analyze the basin fill evolution and to identify and assess the role that extrinsic factors such as climate and sea-level oscillations played during evolution of the unit. For the high-resolution sequence stratigraphical study of the Punta San Andrés Alloformation, high- and low-accommodation system tracts were defined mainly on the basis of the architectural elements present in the succession, also taking into account the relative degree of channel and floodplain deposits. Discontinuities and the nature of depositional systems generated during variations in accommodation helped identify two fourth-order high-accommodation system tracts and two fourth-order low-accommodation system tracts. At a third-order scale, the Punta San Andrés Alloformation may be interpreted as the progradation of continental depositional systems, characterized by a braided system in the proximal areas, and a low-sinuosity, single-channel system in the distal areas, defined by a high rate of sediment supply and discharge peaks which periodically flooded the plains and generated high aggradation rates during the late Pliocene and lower Pleistocene.

Geometric Energy Derivatives at the Complete Basis Set Limit: Application to the Equilibrium Structure and Molecular Force Field of Formaldehyde.

PubMed

Morgan, W James; Matthews, Devin A; Ringholm, Magnus; Agarwal, Jay; Gong, Justin Z; Ruud, Kenneth; Allen, Wesley D; Stanton, John F; Schaefer, Henry F

2018-03-13

Geometric energy derivatives which rely on core-corrected focal-point energies extrapolated to the complete basis set (CBS) limit of coupled cluster theory with iterative and noniterative quadruple excitations, CCSDTQ and CCSDT(Q), are used as elements of molecular gradients and, in the case of CCSDT(Q), expansion coefficients of an anharmonic force field. These gradients are used to determine the CCSDTQ/CBS and CCSDT(Q)/CBS equilibrium structure of the S 0 ground state of H 2 CO where excellent agreement is observed with previous work and experimentally derived results. A fourth-order expansion about this CCSDT(Q)/CBS reference geometry using the same level of theory produces an exceptional level of agreement to spectroscopically observed vibrational band origins with a MAE of 0.57 cm -1 . Second-order vibrational perturbation theory (VPT2) and variational discrete variable representation (DVR) results are contrasted and discussed. Vibration-rotation, anharmonicity, and centrifugal distortion constants from the VPT2 analysis are reported and compared to previous work. Additionally, an initial application of a sum-over-states fourth-order vibrational perturbation theory (VPT4) formalism is employed herein, utilizing quintic and sextic derivatives obtained with a recursive algorithmic approach for response theory.

Matrix elements for type 1 unitary irreducible representations of the Lie superalgebra gl(m|n)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gould, Mark D.; Isaac, Phillip S.; Werry, Jason L.

Using our recent results on eigenvalues of invariants associated to the Lie superalgebra gl(m|n), we use characteristic identities to derive explicit matrix element formulae for all gl(m|n) generators, particularly non-elementary generators, on finite dimensional type 1 unitary irreducible representations. We compare our results with existing works that deal with only subsets of the class of type 1 unitary representations, all of which only present explicit matrix elements for elementary generators. Our work therefore provides an important extension to existing methods, and thus highlights the strength of our techniques which exploit the characteristic identities.

Mechanics analysis of the multi-point-load process for the thin film solar cell

NASA Astrophysics Data System (ADS)

Wang, Zhiming; Wei, Guangpu; Gong, Zhengbang

2008-02-01

The main element of thin film solar cell is silicon. Because of the special mechanical characteristic of silicon, the method of loading pressure on the thin film solar cell and the value of pressure is the key problem which must be solved during the manufacturing of thin film solar cell. This paper describes the special mechanical characteristic of silicon, discussed the test method overall; value of pressure on thin film solar cell; the elements and the method of load by ANSYS finite element, according to these theory analysis, we obtained the key conclusion in the actual operation, these result have a great meaning in industry.

Detector for flow abnormalities in gaseous diffusion plant compressors

DOEpatents

Smith, Stephen F.; Castleberry, Kim N.

1998-01-01

A detector detects a flow abnormality in a plant compressor which outputs a motor current signal. The detector includes a demodulator/lowpass filter demodulating and filtering the motor current signal producing a demodulated signal, and first, second, third and fourth bandpass filters connected to the demodulator/lowpass filter, and filtering the demodulated signal in accordance with first, second, third and fourth bandpass frequencies generating first, second, third and fourth filtered signals having first, second, third and fourth amplitudes. The detector also includes first, second, third and fourth amplitude detectors connected to the first, second, third and fourth bandpass filters respectively, and detecting the first, second, third and fourth amplitudes, and first and second adders connected to the first and fourth amplitude detectors and the second and third amplitude detectors respectively, and adding the first and fourth amplitudes and the second and third amplitudes respectively generating first and second added signals. Finally, the detector includes a comparator, connected to the first and second adders, and comparing the first and second added signals and detecting the abnormal condition in the plant compressor when the second added signal exceeds the first added signal by a predetermined value.

Detector for flow abnormalities in gaseous diffusion plant compressors

DOEpatents

Smith, S.F.; Castleberry, K.N.

1998-06-16

A detector detects a flow abnormality in a plant compressor which outputs a motor current signal. The detector includes a demodulator/lowpass filter demodulating and filtering the motor current signal producing a demodulated signal, and first, second, third and fourth bandpass filters connected to the demodulator/lowpass filter, and filtering the demodulated signal in accordance with first, second, third and fourth bandpass frequencies generating first, second, third and fourth filtered signals having first, second, third and fourth amplitudes. The detector also includes first, second, third and fourth amplitude detectors connected to the first, second, third and fourth bandpass filters respectively, and detecting the first, second, third and fourth amplitudes, and first and second adders connected to the first and fourth amplitude detectors and the second and third amplitude detectors respectively, and adding the first and fourth amplitudes and the second and third amplitudes respectively generating first and second added signals. Finally, the detector includes a comparator, connected to the first and second adders, and comparing the first and second added signals and detecting the abnormal condition in the plant compressor when the second added signal exceeds the first added signal by a predetermined value. 6 figs.

Effects of Role and Assignment Rationale on Attitudes Formed During Peer Tutoring

PubMed Central

Bierman, Karen Linn; Furman, Wyndol

2012-01-01

This study examined the role of contextual factors, such as assignment rationale, on the attitudinal effects of peer tutoring. Fourth-grade children engaged in brief tutoring experiences as either a tutor or tutee. Subjects received four rationales for being selected as tutor or tutee: (a) a competence rationale, (b) a physical characteristic rationale, (c) a chance rationale, or (d) no rationale. As predicted, tutors had more positive attitudes than tutees when they had been given a competence or physical characteristic rationale but not when the tutors were provided a chance rationale or no rationale. Additionally, the tutors’ and tutees’ attitudes were enhanced when no rationale was provided. Results are discussed in terms of their implications for a role-theory analysis of tutoring and their implications for applied programs. PMID:23946549

Effects of Role and Assignment Rationale on Attitudes Formed During Peer Tutoring.

PubMed

Bierman, Karen Linn; Furman, Wyndol

1981-02-01

This study examined the role of contextual factors, such as assignment rationale, on the attitudinal effects of peer tutoring. Fourth-grade children engaged in brief tutoring experiences as either a tutor or tutee. Subjects received four rationales for being selected as tutor or tutee: (a) a competence rationale, (b) a physical characteristic rationale, (c) a chance rationale, or (d) no rationale. As predicted, tutors had more positive attitudes than tutees when they had been given a competence or physical characteristic rationale but not when the tutors were provided a chance rationale or no rationale. Additionally, the tutors' and tutees' attitudes were enhanced when no rationale was provided. Results are discussed in terms of their implications for a role-theory analysis of tutoring and their implications for applied programs.

[Design and analysis of a novel light visible spectrum imaging spectrograph optical system].

PubMed

Shen, Man-de; Li, Fei; Zhou, Li-bing; Li, Cheng; Ren, Huan-huan; Jiang, Qing-xiu

2015-02-01

A novel visible spectrum imaging spectrograph optical system was proposed based on the negative dispersion, the arbitrary phase modulation characteristics of diffractive optical element and the aberration correction characteristics of freeform optical element. The double agglutination lens was substituted by a hybrid refractive/diffractive lens based on the negative dispersion of diffractive optical element. Two freeform optical elements were used in order to correct some aberration based on the aberration correction characteristics of freeform optical element. An example and frondose design process were presented. When the design parameters were uniform, compared with the traditional system, the novel visible spectrum imaging spectrograph optical system's weight was reduced by 22.9%, the total length was reduced by 26.6%, the maximal diameter was reduced by 30.6%, and the modulation transfer function (MTF) in 1.0 field-of-view was improved by 0.35 with field-of-view improved maximally. The maximal distortion was reduced by 1.6%, the maximal longitudinal aberration was reduced by 56.4%, and the lateral color aberration was reduced by 59. 3%. From these data, we know that the performance of the novel system was advanced quickly and it could be used to put forward a new idea for modern visible spectrum imaging spectrograph optical system design.

Young Tanzanians and the Cinema: A Study of the Effects of Selected Basic Motion Picture Elements and Population Characteristics on Filmic Comprehension of Tanzanian Adolescent Primary School Children.

ERIC Educational Resources Information Center

Giltrow, David Roger

A study was conducted of Tanzanian adolescent school children's responses to filmic elements. The design included a very large sample in a complicated factorial design, varying such factors as color, type of action, background and sound of the film, and the demographic characteristics of the subjects. Results showed that of these variables,…

STRUCTURAL DIVERSITY IN SOLID STATE CHEMISTRY:A Story of Squares and Triangles

NASA Astrophysics Data System (ADS)

Lee, Stephen

1996-10-01

A simple method for calculating the electronic energy of extended solids is discussed in this review. This method is based on the Huckel or tight-binding theory in which an explicit pairwise repulsion is added to the generally attractive forces of the partially filled valence electron bands. An expansion based on the power moments of the electronic density of states is discussed, and the structural energy difference theorem is reviewed. The repulsive energy is found to vary linearly with the second power moment of the electronic density of states. These results are then used to show why there is such a diversity of structure in the solid state. The elemental structures of the main group are rationalized by the above methods. It is the third and fourth power moments (which correspond in part to triangles and squares of bonded atoms) that account for much of the elemental structures of the main group elements of the periodic table. This serves as an introduction to further rationalizations of transition for noble metal alloy, binary and ternary telluride and selenide, and other intermetallic structures.Thus a cohesive picture of both covalent and metallic bonding is presented in this review, illustrating the importance of atomic orbitals and their overlap integrals.

NEUTRONIC REACTOR CONTROL ELEMENT

DOEpatents

Newson, H.W.

1960-09-13

A novel composite neutronic reactor control element is offered. The element comprises a multiplicity of sections arranged in end-to-end relationship, each of the sections having a markedly different neutron-reactive characteristic. For example, a three-section control element could contain absorber, moderator, and fuel sections. By moving such an element longitudinally through a reactor core, reactivity is decreased by the absorber, increased slightly by the moderator, or increased substantially by the fuel. Thus, control over a wide reactivity range is provided.

7 CFR 51.2296 - Three-fourths half kernel.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Three-fourths half kernel. 51.2296 Section 51.2296 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards...-fourths half kernel. Three-fourths half kernel means a portion of a half of a kernel which has more than...

Reproducibility of the School-Based Nutrition Monitoring Questionnaire among Fourth-Grade Students in Texas

ERIC Educational Resources Information Center

Penkilo, Monica; George, Goldy Chacko; Hoelscher, Deanna M.

2008-01-01

Objective: To assess reproducibility of a School-Based Nutrition Monitoring (SBNM) questionnaire for fourth-grade students. Design: Test-retest. Setting: Fourth-grade elementary school classrooms. Participants: Multiethnic fourth-grade students from 2 area school districts (N = 322). Main Outcome Measures: Reproducibility coefficients with time…

Myelodysplastic syndrome in an infant with constitutional pure duplication 1q41-qter.

PubMed

Morokawa, Hirokazu; Kamiya, Motoko; Wakui, Keiko; Kobayashi, Mikiko; Kurata, Takashi; Matsuda, Kazuyuki; Kawamura, Rie; Kanno, Hiroyuki; Fukushima, Yoshimitsu; Nakazawa, Yozo; Kosho, Tomoki

2018-01-01

We report on a Japanese female infant as the fourth patient with the constitutional pure duplication 1q41-qter confirmed by chromosomal microarray and as the first who developed myelodysplastic syndrome (MDS) among those with the constitutional 1q duplication. Common clinical features of the constitutional pure duplication 1q41-qter include developmental delay, craniofacial characteristics, foot malformation, hypertrichosis, and respiratory insufficiency. The association between MDS and the duplication of the genes in the 1q41-qter region remains unknown.

Use of Behaviorally Anchored Rating Scales (BARS) to Complement the Management by Objectives (MBO) and Fitness Report Components of the Marine Corps Performance Evaluation System.

DTIC Science & Technology

1980-06-06

performance coaching/ counseling instrument. This conclusion is congruent with current theory on performance appraisal.1 Fred Luthans, in presenting Porter...first characteristic and all of the second and fourth charac- teristics as well. 2 Fred Luthans, Organizational Behavior (2d ed.; New York: McGraw...3d ed. Englewood Clfs, N.J.: Prenfi-ce-Ha- TI -7. Kerlinger, Fred N. Foundations of Behavioral Research. 2d ed. New York: Holt, Rine-art and Winston

An Analysis of Fiscal Years 2014 to 2016 Navy Fourth Quarter Spending: Trends and Characteristics of Q4 O and M Contractual Awards

DTIC Science & Technology

2017-09-01

know what the government is buying with our money ; as service members, we want to ensure the government is buying the best for warfare and protection...deficiency Act violations. Per law, the government cannot receive work for free , and cannot agree to pay people in advance of receiving funding...funding environment. The funding appropriated for specific purposes are coded broadly as different “colors of money ,” and include, but are not limited

Paramagnetic resonance of LaGaO3: Mn single crystals grown by floating zone melting

NASA Astrophysics Data System (ADS)

Vazhenin, V. A.; Potapov, A. P.; Artyomov, M. Yu.; Salosin, M. A.; Fokin, A. V.; Gil'mutdinov, I. F.; Mukhamedshin, I. R.

2016-02-01

The EPR spectrum of Mn-doped lanthanum gallate single crystals grown by floating zone melting with optical heating has been studied. In contrast to the crystals grown according to the Czochralski method, no manganese is found in these crystals even after high-temperature annealing in air. The spectral characteristics of Fe3+ and Gd3+ centers in crystals prepared by various methods have been compared in the rhombohedral phase, and the fourth-rank nondiagonal parameters of the Fe3+ trigonal centers have been determined, as well.

Torus Breakdown and Homoclinic Chaos in a Glow Discharge Tube

NASA Astrophysics Data System (ADS)

Ginoux, Jean-Marc; Meucci, Riccardo; Euzzor, Stefano

2017-12-01

Starting from historical researches, we used, like Van der Pol and Le Corbeiller, a cubic function for modeling the current-voltage characteristic of a direct current low-pressure plasma discharge tube, i.e. a neon tube. This led us to propose a new four-dimensional autonomous dynamical system allowing to describe the experimentally observed phenomenon. Then, mathematical analysis and detailed numerical investigations of such a fourth-order torus circuit enabled to highlight bifurcation routes from torus breakdown to homoclinic chaos following the Newhouse-Ruelle-Takens scenario.

Dysphagia: An Unusual Presentation of Metastatic Uterine Cervical Carcinoma.

PubMed

Hameed, Anam; Dekovich, Alexander A; Lum, Phillip J; Shafi, Mehnaz A

2017-03-01

Worldwide, cervical cancer is the third most common cancer among women and the fourth leading cause of death from cancer. The most common sites of metastasis are the pelvic lymph nodes, vagina, and the pelvic sidewalls. Distant metastases are uncommon but can involve the bone, lung, and liver. Characteristics associated with increased rate of distant metastasis include bulky tumor, endometrial extension, lymph node involvement, and advanced disease. We report the case of a woman with stage II cervical carcinoma, who presented with dysphagia due to cervical cancer metastases to the mediastinum.

National Mapping of Wetland Connectivity

EPA Science Inventory

Connectivity has become a major focus of hydrological and ecological studies. Connectivity influences fluxes between landscape elements, while isolation reduces flows between elements. Thus connectivity can be an important characteristic controlling ecosystem services. Hydrolo...

Recognition of spectral identifier from green coffee beans of arabica and robusta varieties using laser-induced breakdown spectroscopy

NASA Astrophysics Data System (ADS)

Anggraeni, Karina; Nasution, Aulia; Suyanto, Hery

2016-11-01

Coffee is one of the world's commodity that is cultivated in more than 50 countries. Production of coffee in Indonesia is positioned of fourth rank in the world, after Brazil, Vietnam, and Colombia. There are two varieties of coffee grown in Indonesia, i.e. the arabica and robusta. The chemical compositions between arabica and robusta are different each other. A trained coffee tester can distinguish these differences from its taste, but it is very subjective. Laser-Induced Breakdown Spectroscopy (LIBS) is a spectroscopic technique based on the analysis of micro-plasma induced on the surface sample after being shot with a laser pulse. In this study, elemental spectra acquired using Laser-Induced Breakdown Spectroscopy (LIBS) technique were analysed to differentate between green coffee beans of arabica and robusta, which are collected from plantations in Malang, Bondowoso, Prigen, and Pasuruan. Results show that optimum conditions for acquiring spectra from green coffee beans using LIBS are at 120 mJ of laser energy and 1,0 μs of delay time. Green coffee beans of arabica and robusta contain some elements such as Ca, W, Sr, Mg, Be, Na, H, N, K, Rb, and O. Discriminant analysis method was then applied to distinguish the green beans of arabica and robusta coffee. Element identifiers of green coffee beans are Ca, W, Mg, Be, Na, and Sr. The abundant element in green coffee beans is Calcium (Ca), and depth-profile testing shows that Ca is homogeneous inside the beans.

Adaptive mesh refinement for characteristic grids

NASA Astrophysics Data System (ADS)

Thornburg, Jonathan

2011-05-01

I consider techniques for Berger-Oliger adaptive mesh refinement (AMR) when numerically solving partial differential equations with wave-like solutions, using characteristic (double-null) grids. Such AMR algorithms are naturally recursive, and the best-known past Berger-Oliger characteristic AMR algorithm, that of Pretorius and Lehner (J Comp Phys 198:10, 2004), recurses on individual "diamond" characteristic grid cells. This leads to the use of fine-grained memory management, with individual grid cells kept in two-dimensional linked lists at each refinement level. This complicates the implementation and adds overhead in both space and time. Here I describe a Berger-Oliger characteristic AMR algorithm which instead recurses on null slices. This algorithm is very similar to the usual Cauchy Berger-Oliger algorithm, and uses relatively coarse-grained memory management, allowing entire null slices to be stored in contiguous arrays in memory. The algorithm is very efficient in both space and time. I describe discretizations yielding both second and fourth order global accuracy. My code implementing the algorithm described here is included in the electronic supplementary materials accompanying this paper, and is freely available to other researchers under the terms of the GNU general public license.

Trace elements as quantitative probes of differentiation processes in planetary interiors

NASA Technical Reports Server (NTRS)

Drake, M. J.

1980-01-01

The characteristic trace element signature that each mineral in the source region imparts on the magma constitutes the conceptual basis for trace element modeling. It is shown that abundances of trace elements in extrusive igneous rocks may be used as petrological and geochemical probes of the source regions of the rocks if differentiation processes, partition coefficients, phase equilibria, and initial concentrations in the source region are known. Although compatible and incompatible trace elements are useful in modeling, the present review focuses primarily on examples involving the rare-earth elements.

High permittivity patch radiator for single and multi-element hyperthermia applicators.

PubMed

Andreuccetti, D; Bini, M; Ignesti, A; Olmi, R; Priori, S; Vanni, R

1993-07-01

This paper describes a compact, low-profile patch radiator which is the base element for efficient, small-size applicators suitable for superficial hyperthermia. The design criteria and the technological processes involved are presented. The electromagnetic characteristics of the patch element are outlined, and possible application of the radiator are discussed.

Model for selecting quality standards for a salad bar through identifying elements of customer satisfaction.

PubMed

Ouellet, D; Norback, J P

1993-11-01

Continuous quality improvement is the new requirement of the Joint Commission on Accreditation of Healthcare Organizations. This means that meeting quality standards will not be enough. Dietitians will need to improve those standards and the way they are selected. Because quality is defined in terms of the customers, all quality improvement projects must start by defining what customers want. Using a salad bar as an example, this article presents and illustrates a technique developed in Japan to identify which elements in a product or service will satisfy or dissatisfy consumers. Using a model and a questionnaire format developed by Kano and coworkers, 273 students were surveyed to classify six quality elements of a salad bar. Four elements showed a dominant "must-be" characteristic: food freshness, labeling of the dressings, no spills in the food, and no spills on the salad bar. The two other elements (food easy to reach and food variety) showed a dominant one-dimensional characteristic. By better understanding consumer perceptions of quality elements, foodservice managers can select quality standards that focus on what really matters to their consumers.

Survey of elemental specificity in positron annihilation peak shapes

NASA Astrophysics Data System (ADS)

Myler, U.; Simpson, P. J.

1997-12-01

Recently the detailed interpretation of positron-annihilation γ-ray peak shapes has proven to be of interest with respect to their chemical specificity. In this contribution, we show highly resolved spectra for a number of different elements. To this purpose, annihilation spectra with strongly reduced background intensities were recorded in the two detector geometry, using a variable-energy positron beam. Division of the subsequently normalized spectra by a standard spectrum (in our case the spectrum of pure silicon) yields quotient spectra, which display features characteristic of the sample material. First we ascertain that the specific spectrum of an element is conserved in different chemical compounds, demonstrated here by identical oxygen spectra obtained from both SiO2/Si and MgO/Mg. Second, we show highly resolved spectra for a number of different elements (Fe...Zn, Ag, Ir...Au). We show that the characteristic features in these spectra vary in a systematic fashion with the atomic number of the element and can be tentatively identified with particular orbitals. Finally, for 26 different elements we compare the maximum intensity in the quotient spectra with the relative atomic density in the corresponding element. To our knowledge, this is the most comprehensive survey of such data made to date.

[Application of ICP-MS to Identify the Botanic Source of Characteristic Honey in South Yunnan].

PubMed

Wei, Yue; Chen, Fang; Wang, Yong; Chen, Lan-zhen; Zhang, Xue-wen; Wang, Yan-hui; Wu, Li-ming; Zhou, Qun

2016-01-01

By adopting inductively coupled plasma mass spectrometry (ICP-MS) combined with chemometric analysis technology, 23 kinds of minerals in four kinds of characteristic honey derived from Yunnan province were analyzed. The result showed that 21 kinds of mineral elements, namely Na, Mg, K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Mo, Cd, Sb, Ba, Tl and Pb, have significant differences among different varieties of honey. The results of principal component analysis (PCA) showed that the cumulative variance contribution rate of the first four main components reached 77.74%, seven kinds of elements (Mg, Ca, Mn, Co, Sr, Cd, Ba) from the first main component contained most of the honey information. Through the stepwise discriminant analysis, seven kinds of elements (Mg, K, Ca, Cr, Mn, Sr, Pb) were filtered. out and used to establish the discriminant function model, and the correct classification rates of the proposed model reached 90% and 86.7%, respectively, which showed elements contents could be effectively indicators to discriminate the four kinds characteristic honey in southern Yunnan Province. In view of all the honey samples were harvested from apiaries located at south Yunnan Province where have similar climate, soil and other environment conditions, the differences of the mineral elements contents for the honey samples mainly due to their corresponding nectariferous plant. Therefore, it is feasible to identify honey botanical source through the differences of mineral elements.

Development of models of the magnetorheological fluid damper

NASA Astrophysics Data System (ADS)

Kazakov, Yu. B.; Morozov, N. A.; Nesterov, S. A.

2017-06-01

The algorithm for analytical calculation of a power characteristic of magnetorheological (MR) dampers taking into account the rheological properties of MR fluid is considered. The nonlinear magnetorheological characteristics are represented by piecewise linear approximation to MR fluid areas with different viscosities. The extended calculated power characteristics of a MR damper are received and they coincide with actual results. The finite element model of a MR damper is developed; it allows carrying out the analysis of a MR damper taking into account the mutual influence of electromagnetic, hydrodynamic and thermal fields. The results of finite element simulation coincide with analytical solutions that allows using them for design development of a MR damper.

Identification af explosive power factors as predictors of player quality in young female volleyball players.

PubMed

Grgantov, Zoran; Milić, Mirjana; Katić, Ratko

2013-05-01

With the purpose of determining the factor structure of explosive power, as well as the influence of each factor on situational efficiency, 56 young female volleyball players were tested using 14 tests for assessing nonspecific and specific explosive power. By factor analysis, 4 significant factors were isolated which explained the total of over 80% of the common variability in young female volleyball players. The first factor was defined as volleyball-specific jumping, the second factor as nonspecific jumping and sprinting, the third factor as throwing explosive power, while the fourth factor was interpreted as volleyball-specific throwing and spiking speed from the ground. Results obtained by regression analysis in the latent space of explosive power indicate that the identified factors are good predictors of player quality in young female volleyball players. The fourth factor defined as throwing and spiking speed from the ground had the largest influence on player quality, followed by volleyball-specific jumping and nonspecific jumping and sprinting, and to a much lesser extent, by throwing explosive power The results obtained in this age group bring to the fore the ability of spiking and serving a ball of high speed, which hinders the opponents from playing those balls in serve reception and field defence. This ability, combined with a high standing vertical jump reach and spike approach vertical jump reach (which is the basis of the 1st varimax factor) enables successful performance of all volleyball elements by which points are won in complex 1 (spike) and complex 2 (serve and block). Even though the 2nd factor (nonspecific jumping and sprinting) has a slightly smaller impact on situational efficiency in young players, this ability provides preconditions i.e. preparation for successful realisation of all volleyball elements, so greater attention must be paid to perfecting it in young female volleyball players.

Research on the relationship between the elements and pharmacological activities in velvet antler using factor analysis and cluster analysis

NASA Astrophysics Data System (ADS)

Zhou, Libing

2017-04-01

Velvet antler has certain effect on improving the body's immune cells and the regulation of immune system function, nervous system, anti-stress, anti-aging and osteoporosis. It has medicinal applications to treat a wide range of diseases such as tissue wound healing, anti-tumor, cardiovascular disease, et al. Therefore, the research on the relationship between pharmacological activities and elements in velvet antler is of great significance. The objective of this study was to comprehensively evaluate 15 kinds of elements in different varieties of velvet antlers and study on the relationship between the elements and traditional Chinese medicine efficacy for the human. The factor analysis and the factor cluster analysis methods were used to analyze the data of elements in the sika velvet antler, cervus elaphus linnaeus, flower horse hybrid velvet antler, apiti (elk) velvet antler, male reindeer velvet antler and find out the relationship between 15 kinds of elements including Ca, P, Mg, Na, K, Fe, Cu, Mn, Al, Ba, Co, Sr, Cr, Zn and Ni. Combining with MATLAB2010 and SPSS software, the chemometrics methods were made on the relationship between the elements in velvet antler and the pharmacological activities. The first commonality factor F1 had greater load on the indexes of Ca, P, Mg, Co, Sr and Ni, and the second commonality factor F2 had greater load on the indexes of K, Mn, Zn and Cr, and the third commonality factor F3 had greater load on the indexes of Na, Cu and Ba, and the fourth commonality factor F4 had greater load on the indexes of Fe and Al. 15 kinds of elements in velvet antler in the order were elk velvet antler>flower horse hybrid velvet antler>cervus elaphus linnaeus>sika velvet antler>male reindeer velvet antler. Based on the factor analysis and the factor cluster analysis, a model for evaluating traditional Chinese medicine quality was constructed. These studies provide the scientific base and theoretical foundation for the future large-scale rational relation development of velvet antler resources as well as the relationship between the elements and traditional Chinese medicine efficacy for the human.

Does school mobility place elementary school children at risk for lower math achievement? The mediating role of cognitive dysregulation.

PubMed

Friedman-Krauss, Allison H; Raver, C Cybele

2015-12-01

Children growing up in poverty have a higher likelihood of exposure to multiple forms of adversity that jeopardize their chances of academic success. The current paper identifies school mobility, or changing schools, as 1 such poverty-related risk. Using a sample of low-income, predominantly ethnic-minority children (n = 381) in Chicago, this study tests the hypothesis that repeatedly changing schools during the 5-year period between Head Start (preschool) and third grade is a potent predictor of children's math achievement in fourth grade and that children's cognitive dysregulation serves as a mechanism through which school mobility may negatively affect children's math achievement. Hierarchical linear models controlling for baseline child and family characteristics (including children's early math and dysregulation measured during Head Start) revealed an inverse relation between the number of times low-income children changed schools between preschool and third grade and children's math achievement on state standardized tests in fourth grade. Furthermore, frequently changing schools (3 or 4 school changes over the same time period) was positively associated with teacher-reported cognitive dysregulation in third grade and negatively associated with children's math achievement in fourth grade. Evidence for the role of children's cognitive dysregulation as a partial statistical mediator was found for the relation between frequently changing schools and math achievement, even after accounting for baseline risk. Results are discussed in terms of school policies, practices, and intervention strategies to prevent the disruptive and potentially stressful experiences of school mobility for young, low-income children. (c) 2015 APA, all rights reserved).

Does School Mobility Place Elementary School Children at Risk for Lower Math Achievement? The Mediating Role of Cognitive Dysregulation

PubMed Central

Friedman-Krauss, Allison H.; Raver, C. Cybele

2015-01-01

Children growing up in poverty have a higher likelihood of exposure to multiple forms of adversity that jeopardize their chances of academic success. The current paper identifies school mobility, or changing schools, as 1 such poverty-related risk. Using a sample of low-income, predominantly ethnic-minority children (n = 381) in Chicago, this study tests the hypothesis that repeatedly changing schools during the 5-year period between Head Start (preschool) and third grade is a potent predictor of children’s math achievement in fourth grade and that children’s cognitive dysregulation serves as a mechanism through which school mobility may negatively affect children’s math achievement. Hierarchical linear models controlling for baseline child and family characteristics (including children’s early math and dysregulation measured during Head Start) revealed an inverse relation between the number of times low-income children changed schools between preschool and third grade and children’s math achievement on state standardized tests in fourth grade. Furthermore, frequently changing schools (3 or 4 school changes over the same time period) was positively associated with teacher-reported cognitive dysregulation in third grade and negatively associated with children’s math achievement in fourth grade. Evidence for the role of children’s cognitive dysregulation as a partial statistical mediator was found for the relation between frequently changing schools and math achievement, even after accounting for baseline risk. Results are discussed in terms of school policies, practices, and intervention strategies to prevent the disruptive and potentially stressful experiences of school mobility for young, low-income children. PMID:26436870

Quantitative CT Measures of Bronchiectasis in Smokers.

PubMed

Diaz, Alejandro A; Young, Thomas P; Maselli, Diego J; Martinez, Carlos H; Gill, Ritu; Nardelli, Pietro; Wang, Wei; Kinney, Gregory L; Hokanson, John E; Washko, George R; San Jose Estepar, Raul

2017-06-01

Bronchiectasis is frequent in smokers with COPD; however, there are only limited data on objective assessments of this process. The objective was to assess bronchovascular morphology, calculate the ratio of the diameters of bronchial lumen and adjacent artery (BA ratio), and identify those measurements able to discriminate bronchiectasis. We collected quantitative CT (QCT) measures of BA ratios, peak wall attenuation, wall thickness (WT), wall area, and wall area percent (WA%) at matched fourth through sixth airway generations in 21 ever smokers with bronchiectasis (cases) and 21 never-smoking control patients (control airways). In cases, measurements were collected at both bronchiectatic and nonbronchiectatic airways. Logistic analysis and the area under receiver operating characteristic curve (AUC) were used to assess the predictive ability of QCT measurements for bronchiectasis. The whole-lung and fourth through sixth airway generation BA ratio, WT, and WA% were significantly greater in bronchiectasis cases than control patients. The AUCs for the BA ratio to predict bronchiectasis ranged from 0.90 (whole lung) to 0.79 (fourth-generation). AUCs for WT and WA% ranged from 0.72 to 0.75 and from 0.71 to 0.75. The artery diameters but not bronchial diameters were smaller in bronchiectatic than both nonbronchiectatic and control airways (P < .01 for both). Smoking-related increases in the BA ratio appear to be driven by reductions in vascular caliber. QCT measures of BA ratio, WT, and WA% may be useful to objectively identify and quantify bronchiectasis in smokers. ClinicalTrials.gov; No.: NCT00608764; URL: www.clinicaltrials.gov. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Understanding Treatment Readiness in Recently Assessed, Pre-Treatment Substance Abusers

PubMed Central

Rapp, Richard C.; Xu, Jiangmin; Carr, Carey A.; Timothy Lane, D.; Redko, Cristina; Wang, Jichuan; Carlson, Robert G.

2007-01-01

The goal of this study was to more fully understand readiness for treatment in a pre-treatment sample of 446 substance abusers. Structural Equation Modeling (SEM) was used to: (1) examine the relationships between readiness factors identified in the Pre-Treatment Readiness Scale; and (2) identify the effects of predisposing, illness, and inhibiting determinants on the factors. As with in-treatment samples, Problem Recognition was found to influence Treatment Readiness, although through a different intervening factor, Desire for Change rather than Desire for Help. A fourth factor, Treatment Reluctance, was also influenced by the Desire for Change factor. Fixed characteristics such as age and gender had minimal influences on readiness factors, as did inhibiting characteristics that reflected recent functioning. Illness characteristics including drug severity and perceived treatment barriers had a more robust influence on readiness factors. This study provides an increased understanding of readiness for treatment among pre-treatment substance abusers and also supported the construct validity of the Pre-Treatment Readiness Scale. PMID:19274847

Modeling focusing characteristics of low Fnumber diffractive optical elements with continuous relief fabricated by laser direct writing.

PubMed

Shan, Mingguang; Tan, Jiubin

2007-12-10

A theoretical model is established using Rayleigh-Sommerfeld diffraction theory to describe the diffraction focusing characteristics of low F-number diffractive optical elements with continuous relief fabricated by laser direct writing, and continuous-relief diffractive optical elements with a design wavelength of 441.6nm and a F-number of F/4 are fabricated and measured to verify the validity of the diffraction focusing model. The measurements made indicate that the spot size is 1.75mum and the diffraction efficiency is 70.7% at the design wavelength, which coincide well with the theoretical results: a spot size of 1.66mum and a diffraction efficiency of 71.2%.

Long-term anal incontinence after obstetric anal sphincter injury-does grade of tear matter?

PubMed

Jangö, Hanna; Langhoff-Roos, Jens; Rosthøj, Susanne; Saske, Abelone

2018-02-01

Anal incontinence is a major concern following delivery with obstetric anal sphincter injury (OASIS), and has been related to the degree of sphincter tear. The aims of this study were (1) to evaluate whether women with a fourth-degree OASIS in the first delivery have an increased risk of long-term anal and fecal incontinence after a second delivery, and (2) to assess the impact of mode of second delivery on anal incontinence and related symptoms in these patients. We performed secondary analyses of a national questionnaire study in all Danish women with an OASIS in their first delivery and 1 subsequent delivery, both deliveries in 1997 to 2005. The questionnaires were sent a minimum of 5 years since the second delivery. In Denmark, women with anal incontinence after a delivery with OASIS are recommended elective cesarean deliveries in subsequent pregnancies. We performed uni- and multivariable logistic regression analyses to evaluate the outcomes. In total, 2008 patients had an OASIS, of whom 12.2% (n = 245) had a fourth-degree tear in the first delivery. The median follow-up time since the first delivery with OASIS was 11.6 years (IQR, 10.2-13.2 years) and since the second delivery 8.5 years (IQR, 7.1-10.1 years). Women with a fourth-degree sphincter injury in the first delivery were at higher risk for anal incontinence (58.8%, n = 144) as well as fecal incontinence (30.6%, n = 75) than patients with a third-degree injury in the first delivery (41.0%, n = 723, and 14.6%, n = 258, respectively). The differences between groups persisted after adjustment for important maternal, fetal, and obstetric characteristics (adjusted odds ratio [aOR], 2.14; 95% confidence interval [CI], 1.52-3.02; P < 0.001 for anal incontinence; and aOR, 2.49; 95% CI, 1.73-3.56; P < 0.001 for fecal incontinence). In subgroup analyses of patients with fourth-degree anal sphincter injury in the first delivery, the mode of second delivery was not associated with the risk of anal incontinence (aOR, 0.97; 95% CI, 0.41-1.84; P = 0.71) or fecal incontinence (aOR, 1.28; 95% CI, 0.65-2.52; P = 0.48). The effect of the mode of the second delivery did not differ between women with a fourth-degree OASIS and those with a third-degree injury with regard to both anal (P = 0.09) and fecal (P = 0.96) incontinence. After a second delivery, women with a fourth-degree OASIS in the first delivery have a higher risk of long-term anal and fecal incontinence than women with a third-degree sphincter injury. Adjusted odds of long-term anal and fecal incontinence did not differ significantly by mode of second delivery. Women with a fourth-degree OASIS should be informed about the increased risk of long-term anal incontinence and advised that subsequent elective cesarean delivery is not protective. Copyright © 2017 Elsevier Inc. All rights reserved.

75 FR 35649 - Safety Zone; Fourth of July Fireworks, Lake Tahoe, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... Zone; Fourth of July Fireworks, Lake Tahoe, CA AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the Fourth of July Fireworks safety zone from 9... Fourth of July Fireworks Display in 33 CFR 165.1191 on July 3, 2010. The fireworks launch site is...

76 FR 37646 - Safety Zone; Northern California Annual Fireworks Events, Fourth of July Fireworks, Lake Tahoe, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... Zone; Northern California Annual Fireworks Events, Fourth of July Fireworks, Lake Tahoe, CA AGENCY... annual safety zone for the Fourth of July Fireworks, Lake Tahoe, California, located off Incline Village...,000 foot safety zone for the annual Fourth of July Fireworks Display in 33 CFR 165.1191 on July 4...

Wetland Hydrological Connectivity: A Classification Approach and Continental Assessment

EPA Science Inventory

Connectivity has become a major focus of hydrological and ecological studies. Connectivity influences fluxes between landscape elements, while isolation reduces flows between elements. Thus connectivity can be an important characteristic controlling ecosystem services. Hydrolo...

Piezoelectric Actuator with Frequency Characteristics for a Middle-Ear Implant.

PubMed

Shin, Dong Ho; Cho, Jin-Ho

2018-05-24

The design and implementation of a novel piezoelectric-based actuator for an implantable middle-ear hearing aid is described in this paper. The proposed actuator has excellent low-frequency output characteristics, and can generate high output in a specific frequency band by adjusting the mechanical resonance. The actuator consists of a piezoelectric element, a miniature bellows, a cantilever membrane, a metal ring support, a ceramic tip, and titanium housing. The optimal structure of the cantilever-membrane design, which determines the frequency characteristics of the piezoelectric actuator, was derived through finite element analysis. Based on the results, the piezoelectric actuator was implemented, and its performance was verified through a cadaveric experiment. It was confirmed that the proposed actuator provides better performance than currently used actuators, in terms of frequency characteristics.

The Australian Baby Bonus Maternity Payment and Birth Characteristics in Western Australia

PubMed Central

Einarsdóttir, Kristjana; Langridge, Amanda; Hammond, Geoffrey; Gunnell, Anthony S.; Haggar, Fatima A.; Stanley, Fiona J.

2012-01-01

Background The Australian baby bonus maternity payment introduced in 2004 has been reported to have successfully increased fertility rates in Australia. We aimed to investigate the influence of the baby bonus on maternal demographics and birth characteristics in Western Australia (WA). Methods and Findings This study included 200,659 birth admissions from WA during 2001–2008, identified from administrative birth and hospital data-systems held by the WA Department of Health. We estimated average quarterly birth rates after the baby bonus introduction and compared them with expected rates had the policy not occurred. Rate and percentage differences (including 95% confidence intervals) were estimated separately by maternal demographics and birth characteristics. WA birth rates increased by 12.8% following the baby bonus implementation with the greatest increase being in mothers aged 20–24 years (26.3%, 95%CI = 22.0,30.6), mothers having their third (1.6%, 95%CI = 0.9,2.4) or fourth child (2.2%, 95%CI = 2.1,2.4), mothers living in outer regional and remote areas (32.4%, 95%CI = 30.2,34.6), mothers giving birth as public patients (1.5%, 95%CI = 1.3,1.8), and mothers giving birth in public hospitals (3.5%, 95%CI = 2.6,4.5). Interestingly, births to private patients (−4.3%, 95%CI = −4.8,−3.7) and births in private hospitals (−6.3%, 95%CI = −6.8,−5.8) decreased following the policy implementation. Conclusions The introduction of the baby bonus maternity payment may have served as an incentive for women in their early twenties and mothers having their third or fourth child and may have contributed to the ongoing pressure and staff shortages in Australian public hospitals, particularly those in outer regional and remote areas. PMID:23145010

School District Variation in Parental Influence on Underage Drinking Behaviors.

PubMed

Tseng, Fang-Yi; Chen, Kuang-Hung; Liu, Chieh-Yu; Chen, Wei J; Chen, Chuan-Yu

2017-09-01

We examined the relationship between alcohol-specific and nonalcohol-specific parental characteristics with occasional alcohol drinking in early adolescence and probed potential school district variation. A total of 1,581 fourth and sixth graders (age range: 10-12 years) were ascertained from 17 elementary schools in a cohort study conducted in northern Taiwan in 2006, with three waves of follow-up between 2007 and 2009. Information on alcohol-specific and nonalcohol-specific parental attributes was obtained from the first two waves of self-administered paper-and-pencil questionnaires; occasional drinking, defined by having drunk on three or more occasions in the past year, was assessed at fourth wave. School district characteristics were retrieved from official statistics and self-report. Multilevel analyses were used to evaluate strength of association, with stratification by disadvantaged status of school districts. Thirteen percent (95% confidence interval [CI] = 10.1%-15.8%) of young adolescents reported to drink occasionally; higher grade level, childhood drinking experience, lower parental education, maternal drinking, and positive parental attitude toward drinking were significant predictors. Nonalcohol parental predictors, including not living with both parents (adjusted odds ratio [aOR] = 2.34, 95% CI = 1.21-4.53) and parental involvement/reinforcement (aOR = .44; 95% CI = .22-.87), were only significant for the children of socioeconomically disadvantaged school districts. As to alcohol-specific parental characteristics, the effects of maternal drinking appear more salient in socioeconomically advantaged school districts (aOR = 2.63; 95% CI = 1.66-4.18). Alcohol-specific and nonalcohol-specific parental influence may operate differentially across school districts sub-grouped by socioeconomic attributes. Preventive strategies raising the awareness of underage drinking and strengthening parenting skills should be devised and implemented in the perspective of social context. Copyright © 2017 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Mapping the global football field: a sociological model of transnational forces within the world game.

PubMed

Giulianotti, Richard; Robertson, Roland

2012-06-01

This paper provides a sociological model of the key transnational political and economic forces that are shaping the 'global football field'. The model draws upon, and significantly extends, the theory of the 'global field' developed previously by Robertson. The model features four quadrants, each of which contains a dominant operating principle, an 'elemental reference point', and an 'elemental theme'. The quadrants contain, first, neo-liberalism, associated with the individual and elite football clubs; second, neo-mercantilism, associated with nation-states and national football systems; third, international relations, associated with international governing bodies; and fourth, global civil society, associated with diverse institutions that pursue human development and/or social justice. We examine some of the interactions and tensions between the major institutional and ideological forces across the four quadrants. We conclude by examining how the weakest quadrant, featuring global civil society, may gain greater prominence within football. In broad terms, we argue that our four-fold model may be utilized to map and to examine other substantive research fields with reference to globalization. © London School of Economics and Political Science 2012.

Aeolian contamination of Se and Ag in the North Pacific from Asian fossil fuel combustion.

PubMed

Ranville, Mara A; Cutter, Gregory A; Buck, Clifton S; Landing, William M; Cutter, Lynda S; Resing, Joseph A; Flegal, A Russell

2010-03-01

Energy production from fossil fuels, and in particular the burning of coal in China, creates atmospheric contamination that is transported across the remote North Pacific with prevailing westerly winds. In recent years this pollution from within Asia has increased dramatically, as a consequence of vigorous economic growth and corresponding energy consumption. During the fourth Intergovernmental Oceanographic Commission baseline contaminant survey in the western Pacific Ocean from May to June, 2002, surface waters and aerosol samples were measured to investigate whether atmospheric deposition of trace elements to the surface North Pacific was altering trace element biogeochemical cycling. Results show a presumably anthropogenic enrichment of Ag and of Se, which is a known tracer of coal combustion, in the North Pacific atmosphere and surface waters. Additionally, a strong correlation was seen between dissolved Ag and Se concentrations in surface waters. This suggests that Ag should now also be considered a geochemical tracer for coal combustion, and provides further evidence that Ag exhibits a disturbed biogeochemical cycle as the result of atmospheric deposition to the North Pacific.

Compliant deformable mirror approach for wavefront improvement

NASA Astrophysics Data System (ADS)

Clark, James H.; Penado, F. Ernesto

2016-04-01

We describe a compliant static deformable mirror approach to reduce the wavefront concavity at the Navy Precision Optical Interferometer (NPOI). A single actuator pressing on the back surface of just one of the relay mirrors deforms the front surface in a correcting convex shape. Our design uses the mechanical advantage gained from a force actuator sandwiched between a rear flexure plate and the back surface of the mirror. We superimpose wavefront contour measurements with our finite element deformed mirror model. An example analysis showed improvement from 210-nm concave-concave wavefront to 51-nm concave-concave wavefront. With our present model, a 100-nm actuator increment displaces the mirror surface by 1.1 nm. We describe the need for wavefront improvement that arises from the NPOI reconfigurable array, offer a practical design approach, and analyze the support structure and compliant deformable mirror using the finite element method. We conclude that a 20.3-cm-diameter, 1.9-cm-thick Zerodur® mirror shows that it is possible to deform the reflective surface and cancel out three-fourths of the wavefront deformation without overstressing the material.

A variational numerical method based on finite elements for the nonlinear solution characteristics of the periodically forced Chen system

NASA Astrophysics Data System (ADS)

Khan, Sabeel M.; Sunny, D. A.; Aqeel, M.

2017-09-01

Nonlinear dynamical systems and their solutions are very sensitive to initial conditions and therefore need to be approximated carefully. In this article, we present and analyze nonlinear solution characteristics of the periodically forced Chen system with the application of a variational method based on the concept of finite time-elements. Our approach is based on the discretization of physical time space into finite elements where each time-element is mapped to a natural time space. The solution of the system is then determined in natural time space using a set of suitable basis functions. The numerical algorithm is presented and implemented to compute and analyze nonlinear behavior at different time-step sizes. The obtained results show an excellent agreement with the classical RK-4 and RK-5 methods. The accuracy and convergence of the method is shown by comparing numerically computed results with the exact solution for a test problem. The presented method has shown a great potential in dealing with the solutions of nonlinear dynamical systems and thus can be utilized in delineating different features and characteristics of their solutions.

[Rare earth elements contents and distribution characteristics in nasopharyngeal carcinoma tissue].

PubMed

Zhang, Xiangmin; Lan, Xiaolin; Zhang, Lingzhen; Xiao, Fufu; Zhong, Zhaoming; Ye, Guilin; Li, Zong; Li, Shaojin

2016-03-01

To investigate the rare earth elements(REEs) contents and distribution characteristics in nasopharyngeal carcinoma( NPC) tissue in Gannan region. Thirty patients of NPC in Gannan region were included in this study. The REEs contents were measured by tandem mass spectrometer inductively coupled plasma(ICP-MS/MS) in 30 patients, and the REEs contents and distribution were analyzed. The average standard deviation value of REEs in lung cancer and normal lung tissues was the minimum mostly. Light REEs content was higher than the medium REEs, and medium REEs content was higher than the heavy REEs content. REEs contents changes in nasopharyngeal carcinoma were variable obviously, the absolute value of Nd, Ce, Pr, Gd and other light rare earth elements were variable widely. The degree of changes on Yb, Tb, Ho and other heavy rare earth elements were variable widely, and there was presence of Eu, Ce negative anomaly(δEu=0. 385 5, δCe= 0. 523 4). The distribution characteristic of REEs contents in NPC patients is consistent with the parity distribution. With increasing atomic sequence, the content is decline wavy. Their distribution patterns were a lack of heavy REEs and enrichment of light REEs, and there was Eu , Ce negative anomaly.

Characteristics and genesis of Rare Earth Element (REE) in western Indonesia

NASA Astrophysics Data System (ADS)

Handoko, A. D.; Sanjaya, E.

2018-02-01

Rare Earth Element (REE) has unique properties that have been used in many hightech applications. The demand of REE increased recently in the world due to its special properties. Although REE concentration in the crust is higher than gold, economically viable deposits are still rare. Reduction of REE exports by China cause increased prices of REE. Due to this condition, exploration of potential REE mines emerged. Indonesia also participates in this phenomenon, and explore the possibility of REE mines in its area. This review will discuss the characteristics and genesis of REE and its occurrence in western Indonesia; focused in Sumatera, Tin Island, and Kalimantan. The review is done based on literature research from several resources about characteristics of rare earth element in general and in the given area. The research shows that the potential REE mines can be found in several different locations in Indonesia, such as Tin Island, Sumatera, and Kalimantan. Most of them are composed of monazite, zircon, and xenotime as rare earth minerals. Monazite iss known for its elevated number of radioactive elements, so study about radioactive content and more environment friendly ore processing becomes compulsory.

Students teaching students: evaluation of a "near-peer" teaching experience.

PubMed

Naeger, David M; Conrad, Miles; Nguyen, Janet; Kohi, Maureen P; Webb, Emily M

2013-09-01

Teaching is an important skill. Academic physicians teach on a daily basis, and nearly all physicians occasionally teach colleagues and patients. There are generally few opportunities for medical students to learn teaching skills. We developed a novel "near-peer" teaching program in which fourth-year students cotaught first-year students. Eighteen fourth-year students enrolled in our institution's primary senior radiology elective learned the basics of ultrasound through a series of lectures and hands-on scanning sessions. Each fourth-year student, paired with a radiology resident or attending, then cotaught a first-year anatomy small group session. After instruction, voluntary surveys were administered to assess the perceived value of the "near-peer" teaching experience. Seventeen of 18 (94%) and 104 of 120 (87%) administered surveys were returned by fourth- and first-year students, respectively. Sixteen (94%) and 99 (95%) of the fourth- and first-year students reported they "enjoyed" or "really enjoyed" the near-peer teaching experience. Fourteen (82%) of the fourth years perceived improvement in their teaching skills and an increase in their knowledge. Only 8 (47%) of the fourth years thought they were "helpful" or "very helpful," though 92 (88%) of the first years identified their fourth-year co-instructors as "helpful" or "very helpful." We piloted a novel "near-peer" program. Both senior and freshman students enjoyed the experience, and fourth years thought the session was educational for them as well. Although most fourth years did not judge themselves as helpful, first-year students overwhelmingly considered them a useful addition to the session. Copyright © 2013 AUR. Published by Elsevier Inc. All rights reserved.