46 CFR 380.21 - Reproduction.

Code of Federal Regulations, 2011 CFR

2011-10-01

... film. The microfilm shall be regularly inspected for aging in accordance with Handbook 96, entitled, “Inspection of Processed Photographic Record Films for Aging Blemishes”, published by the U.S. Department of...

7 CFR 920.110 - Exemptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Federal-State Inspection Service to provide inspection during its regular working hours at least 4 hours... be less than one-half inch in height. (b) Minimum quantities. Notwithstanding any other provision of...

47 CFR 76.1700 - Records to be maintained by cable system operators.

Code of Federal Regulations, 2012 CFR

2012-10-01

... inspection file shall be available for public inspection at any time during regular business hours. (c) All... of any material in the public inspection file shall be available for machine reproduction upon.... Requests for machine copies shall be fulfilled at a location specified by the system operator, within a...

Spectral X-ray Radiography for Safeguards at Nuclear Fuel Fabrication Facilities: A Feasibility Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, Andrew J.; McDonald, Benjamin S.; Smith, Leon E.

The methods currently used by the International Atomic Energy Agency to account for nuclear materials at fuel fabrication facilities are time consuming and require in-field chemistry and operation by experts. Spectral X-ray radiography, along with advanced inverse algorithms, is an alternative inspection that could be completed noninvasively, without any in-field chemistry, with inspections of tens of seconds. The proposed inspection system and algorithms are presented here. The inverse algorithm uses total variation regularization and adaptive regularization parameter selection with the unbiased predictive risk estimator. Performance of the system is quantified with simulated X-ray inspection data and sensitivity of the outputmore » is tested against various inspection system instabilities. Material quantification from a fully-characterized inspection system is shown to be very accurate, with biases on nuclear material estimations of < 0.02%. It is shown that the results are sensitive to variations in the fuel powder sample density and detector pixel gain, which increase biases to 1%. Options to mitigate these inaccuracies are discussed.« less

KENNEDY SPACE CENTER, FLA. - In the Columbia Debris Hangar, members of the Stafford-Covey Return to Flight Task Group (SCTG) inspect some of the debris. Chairing the task group are Richard O. Covey, former Space Shuttle commander, and Thomas P. Stafford (fourth from left), Apollo commander. Chartered by NASA Administrator Sean O’Keefe, the task group will perform an independent assessment of NASA’s implementation of the final recommendations by the Columbia Accident Investigation Board.

NASA Image and Video Library

2003-08-05

KENNEDY SPACE CENTER, FLA. - In the Columbia Debris Hangar, members of the Stafford-Covey Return to Flight Task Group (SCTG) inspect some of the debris. Chairing the task group are Richard O. Covey, former Space Shuttle commander, and Thomas P. Stafford (fourth from left), Apollo commander. Chartered by NASA Administrator Sean O’Keefe, the task group will perform an independent assessment of NASA’s implementation of the final recommendations by the Columbia Accident Investigation Board.

29 CFR 3.4 - Submission of weekly statements and the preservation and inspection of weekly payroll records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... inspection of weekly payroll records. 3.4 Section 3.4 Labor Office of the Secretary of Labor CONTRACTORS AND... STATES § 3.4 Submission of weekly statements and the preservation and inspection of weekly payroll... subcontractor, within seven days after the regular payment date of the payroll period, to a representative of a...

Arctic Undersea Inspection of Pipelines and Structures.

DTIC Science & Technology

1983-06-01

approaches . Inspection Requirements ’.5 Underwater inspection requirements for Arctic structures and pipelines *can be met by present techniques with two...look for surface evidence of leakage. An .ce cover negates this approach . The second exception is the requirement to regularly monitor the cathodic...training, payload, transiting capability, depth capability and an unknown degree of judgement degradation brought about by the psychological aspects of

Dimensional regularization of the IR divergences in the Fokker action of point-particle binaries at the fourth post-Newtonian order

NASA Astrophysics Data System (ADS)

Bernard, Laura; Blanchet, Luc; Bohé, Alejandro; Faye, Guillaume; Marsat, Sylvain

2017-11-01

The Fokker action of point-particle binaries at the fourth post-Newtonian (4PN) approximation of general relativity has been determined previously. However two ambiguity parameters associated with infrared (IR) divergencies of spatial integrals had to be introduced. These two parameters were fixed by comparison with gravitational self-force (GSF) calculations of the conserved energy and periastron advance for circular orbits in the test-mass limit. In the present paper together with a companion paper, we determine both these ambiguities from first principle, by means of dimensional regularization. Our computation is thus entirely defined within the dimensional regularization scheme, for treating at once the IR and ultra-violet (UV) divergencies. In particular, we obtain crucial contributions coming from the Einstein-Hilbert part of the action and from the nonlocal tail term in arbitrary dimensions, which resolve the ambiguities.

Regularization of the Perturbed Spatial Restricted Three-Body Problem by L-Transformations

NASA Astrophysics Data System (ADS)

Poleshchikov, S. M.

2018-03-01

Equations of motion for the perturbed circular restricted three-body problem have been regularized in canonical variables in a moving coordinate system. Two different L-matrices of the fourth order are used in the regularization. Conditions for generalized symplecticity of the constructed transform have been checked. In the unperturbed case, the regular equations have a polynomial structure. The regular equations have been numerically integrated using the Runge-Kutta-Fehlberg method. The results of numerical experiments are given for the Earth-Moon system parameters taking into account the perturbation of the Sun for different L-matrices.

Commonsense Methods for Children with Special Educational Needs: Strategies for the Regular Classroom. Fourth Edition.

ERIC Educational Resources Information Center

Westwood, Peter

This book is designed to provide teachers with an immediate and comprehensive source of practical strategies for meeting children's special needs in regular classrooms. Chapter 1 explores issues relating to children with general and specific learning difficulties. It discusses inclusive schooling and special educational needs, factors associated…

Restaurant Inspection Scores and Foodborne Disease

PubMed Central

Pavlin, Boris I.; LaFleur, Bonnie J.; Ingram, L. Amanda; Schaffner, William

2004-01-01

Restaurants in the United States are regularly inspected by health departments, but few data exist regarding the effect of restaurant inspections on food safety. We examined statewide inspection records from January 1993 through April 2000. Data were available from 167,574 restaurant inspections. From 1993 to 2000, mean scores rose steadily from 80.2 to 83.8. Mean inspection scores of individual inspectors were 69–92. None of the 12 most commonly cited violations were critical food safety hazards. Establishments scoring <60 had a mean improvement of 16 points on subsequent inspections. Mean scores of restaurants experiencing foodborne disease outbreaks did not differ from restaurants with no reported outbreaks. A variety of factors influence the uniformity of restaurant inspections. The restaurant inspection system should be examined to identify ways to ensure food safety. PMID:15200861

Mattress cleanliness: the role of monitoring and maintenance.

PubMed

Aziz, Ann-Marie

A clean and tidy environment provides the right setting for good patient care. It is fundamental in preventing and/or controlling the spread of healthcare-associated infections (HCAI). Cleanliness is an essential component for the comfort and dignity of patients, particularly those for whom a hospital is home for any length of time. Patients spend a lot of their time in bed so it is important for them to be provided with well maintained and clean mattresses. Beds, and especially the mattresses, should be cleaned and inspected regularly so patients know they are being cared for in a clean and safe environment. To prolong the life of the mattress and reduce infection risks, inspections for damage and contamination must take place on a regular basis. Assessment criteria for the audit of a mattress can include a visual inspection, a cover permeability test and a foam support surface test. These assessments will ensure the mattress is compliant with current standards and identify whether or not they require condemning. Mattress care can be improved by adopting unified good practices that can be standardized and audited regularly.

49 CFR 1248.6 - Public inspection-railroad reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... STATISTICS § 1248.6 Public inspection—railroad reports. The individual commodity statistics reports of class... public inspection, and such required commodity statistics reports, to be filed for the years beginning..., may be excluded from a railroad's regular freight commodity statistics report and filed in a...

43 CFR 3481.3 - Confidentiality.

Code of Federal Regulations, 2011 CFR

2011-10-01

... part or part 3400 of this title shall be open for public inspection and copying during regular office... geologic and geophysical data and maps pertaining to Federal recoverable coal reserves obtained from...)), such as geologic and geophysical data and maps, shall not be available for public inspection or made...

43 CFR 3481.3 - Confidentiality.

Code of Federal Regulations, 2014 CFR

2014-10-01

... part or part 3400 of this title shall be open for public inspection and copying during regular office... geologic and geophysical data and maps pertaining to Federal recoverable coal reserves obtained from...)), such as geologic and geophysical data and maps, shall not be available for public inspection or made...

43 CFR 3481.3 - Confidentiality.

Code of Federal Regulations, 2013 CFR

2013-10-01

... part or part 3400 of this title shall be open for public inspection and copying during regular office... geologic and geophysical data and maps pertaining to Federal recoverable coal reserves obtained from...)), such as geologic and geophysical data and maps, shall not be available for public inspection or made...

43 CFR 3481.3 - Confidentiality.

Code of Federal Regulations, 2012 CFR

2012-10-01

... part or part 3400 of this title shall be open for public inspection and copying during regular office... geologic and geophysical data and maps pertaining to Federal recoverable coal reserves obtained from...)), such as geologic and geophysical data and maps, shall not be available for public inspection or made...

78 FR 9577 - Importation of Horses From Contagious Equine Metritis-Affected Countries

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... conduct regular training of testing officials and make unscheduled visits to animal import centers... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service 9 CFR Part 93 [Docket No... AGENCY: Animal and Plant Health Inspection Service, USDA. ACTION: Final rule. SUMMARY: We are adopting as...

77 FR 52074 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... examination by an independent public accountant to verify client assets pursuant to a written agreement with... from an independent public accountant that is registered with and subject to regular inspection by the... to annual audit by an independent public accountant registered with, and subject to regular...

Polyhedra and Higher Dimensions.

ERIC Educational Resources Information Center

Scott, Paul

1988-01-01

Describes the definition and characteristics of a regular polyhedron, tessellation, and pseudopolyhedra with diagrams. Discusses the nature of simplex, hypercube, and cross-polytope in the fourth dimension and beyond. (YP)

46 CFR 159.010-3 - Independent laboratory: Standards for acceptance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... engaged, as a regular part of its business, in performing inspections and tests that are the same as or... manufacturer; (4) Not be dependent on Coast Guard acceptance under this subchapter to remain in business; and (5) Not advertise or promote the manufacturer's equipment or material that the laboratory inspects...

28 CFR 75.5 - Inspection of records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... regular working hours and at other reasonable times, and within reasonable limits and in a reasonable..., which in no case may be less than 20 hours per week. (2) Upon commencing an inspection, the investigator... place during normal business hours and at such places as specified in § 75.4. For the purpose of this...

On solvability of boundary value problems for hyperbolic fourth-order equations with nonlocal boundary conditions of integral type

NASA Astrophysics Data System (ADS)

Popov, Nikolay S.

2017-11-01

Solvability of some initial-boundary value problems for linear hyperbolic equations of the fourth order is studied. A condition on the lateral boundary in these problems relates the values of a solution or the conormal derivative of a solution to the values of some integral operator applied to a solution. Nonlocal boundary-value problems for one-dimensional hyperbolic second-order equations with integral conditions on the lateral boundary were considered in the articles by A.I. Kozhanov. Higher-dimensional hyperbolic equations of higher order with integral conditions on the lateral boundary were not studied earlier. The existence and uniqueness theorems of regular solutions are proven. The method of regularization and the method of continuation in a parameter are employed to establish solvability.

Correlation between ERMI values and other Moisture and Mold Assessments of Homes in the American Healthy Home Survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vesper, Sephen J.; McKinstry, Craig A.; Cox, David J.

2009-11-30

Objective: The objective of this study was to determine the correlation between ERMI values in the HUD American Healthy Home Survey (AHHS) homes and either inspector reports or occupant assessments of mold and moisture. Methods: In the AHHS, moisture and mold were assessed by a pair of inspectors and with an occupant questionnaire. These results were compared to the results of the Environmental Relative Moldiness Index (ERMI) values for each home. Results: Homes in the highest ERMI quartile were most often in agreement with visual inspection and/or occupant assessment. However, in 52% of the fourth quartile ERMI homes, the inspectormore » and occupant assessment did not indicate water or mold problems. Yet the concentrations of each ERMI panel mold species detected in all fourth quartile homes were statistically indistinguishable. Conclusions: About 50% of water-damaged, moldy homes were not detected by inspection or questioning of the occupant about water and mold.« less

An Observational Study of Instructional and Curricular Practices Used with Gifted and Talented Students in Regular Classrooms. Research Monograph 93104.

ERIC Educational Resources Information Center

Westberg, Karen L.; And Others

This report describes one part of the Classroom Practices Study, focusing on systematic observations of gifted and talented students in 46 third and fourth grade classrooms. The observations were designed to determine if and how teachers meet the needs of gifted and talented students in regular classroom settings. The Classroom Practices Record…

The Effects of Pupil-Corrected Tests and Written Teacher Comments on Learning to Spell in the Upper Elementary Grades.

ERIC Educational Resources Information Center

Lesner, Julius

To determine the effects of teacher comments on spelling test papers, 32 randomly selected fourth- and sixth-grade teachers from low and high socioeconomic area Los Angeles elementary schools used 965 pupils in their regular classes as subjects. The teachers gave the regular weekly spelling test, and one of four evaluation treatments was randomly…

7 CFR 51.38 - Basis for fees and rates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... condition inspection, a one hour charge shall be added to the carlot fee; (4) When inspections are performed... grader's regularly scheduled work week, a charge for overtime or holiday work shall be made at the rate... ($74, on or after March 1, 2008) per hour; Provided, that: (1) Charges for time shall be rounded to the...

7 CFR 29.2635 - Rule 19.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Rule 19. 29.2635 Section 29.2635 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... the fourth and fifth qualities of green grades. Any lot containing 20 percent or more of crude leaves...

7 CFR 29.2635 - Rule 19.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Rule 19. 29.2635 Section 29.2635 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... the fourth and fifth qualities of green grades. Any lot containing 20 percent or more of crude leaves...

49 CFR 236.342 - Switch circuit controller.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Switch circuit controller. 236.342 Section 236.342... Instructions § 236.342 Switch circuit controller. Switch circuit controller connected at the point to switch... corresponding to switch point closure when switch point is open one-fourth inch or more. Inspection and Tests ...

49 CFR 236.342 - Switch circuit controller.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Switch circuit controller. 236.342 Section 236.342... Instructions § 236.342 Switch circuit controller. Switch circuit controller connected at the point to switch... corresponding to switch point closure when switch point is open one-fourth inch or more. Inspection and Tests ...

49 CFR 236.342 - Switch circuit controller.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Switch circuit controller. 236.342 Section 236.342... Instructions § 236.342 Switch circuit controller. Switch circuit controller connected at the point to switch... corresponding to switch point closure when switch point is open one-fourth inch or more. Inspection and Tests ...

49 CFR 236.342 - Switch circuit controller.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Switch circuit controller. 236.342 Section 236.342... Instructions § 236.342 Switch circuit controller. Switch circuit controller connected at the point to switch... corresponding to switch point closure when switch point is open one-fourth inch or more. Inspection and Tests ...

49 CFR 236.342 - Switch circuit controller.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Switch circuit controller. 236.342 Section 236.342... Instructions § 236.342 Switch circuit controller. Switch circuit controller connected at the point to switch... corresponding to switch point closure when switch point is open one-fourth inch or more. Inspection and Tests ...

7 CFR 29.3621 - Rule 20.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Rule 20. 29.3621 Section 29.3621 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... except the fourth and fifth qualities of the B, C, and X groups in green color. Any lot containing 20...

7 CFR 29.3621 - Rule 20.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Rule 20. 29.3621 Section 29.3621 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... except the fourth and fifth qualities of the B, C, and X groups in green color. Any lot containing 20...

Evaluation of DoD Biological Safety and Security Implementation

DTIC Science & Technology

2016-04-27

biosecurity policy and directives, plans, orders, and guidance across DoD Component laboratories that were conducting research using biological select ...taken, • ensure that all BSAT laboratories are inspected regularly according to a standardized set of criteria , • coordinate external technical and...Biological Select Agent and Toxins laboratory inspections. Management Comments and Our Response The Under Secretary of Defense for Acquisition

Implementation of the updated 2015 Commission for Hospital Hygiene and Infection Prevention (KRINKO) recommendations "Prevention and control of catheter-associated urinary tract infections" in the hospitals in Frankfurt/Main, Germany.

PubMed

Heudorf, Ursel; Grünewald, Miriam; Otto, Ulla

2016-01-01

The Commission for Hospital Hygiene and Infection Prevention (KRINKO) updated the recommendations for the prevention of catheter-associated urinary tract infections in 2015. This article will describe the implementation of these recommendations in Frankfurt's hospitals in autumn, 2015. In two non-ICU wards of each of Frankfurt's 17 hospitals, inspections were performed using a checklist based on the new KRINKO recommendations. In one large hospital, a total of 5 wards were inspected. The inspections covered the structure and process quality (operating instructions, training, indication, the placement and maintenance of catheters) and the demonstration of the preparation for insertion of a catheter using an empty bed and an imaginary patient, or insertion in a model. Operating instructions were available in all hospital wards; approximately half of the wards regularly performed training sessions. The indications were largely in line with the recommendations of the KRINKO. Alternatives to urinary tract catheters were available and were used more often than the urinary tract catheters themselves (15.9% vs. 13.5%). In accordance with the recommendations, catheters were placed without antibiotic prophylaxis or the instillation of antiseptic or antimicrobial substances or catheter flushing solutions. The demonstration of catheter placement was conscientiously performed. Need for improvement was seen in the daily documentation and the regular verification of continuing indication for a urinary catheter, as well as the omission of regular catheter change. Overall, the recommendations of the KRINKO on the prevention of catheter-associated urinary tract infections were adequately implemented. However, it cannot be ruled out that in situations with time pressure and staff shortage, the handling of urinary tract catheters may be of lower quality than that observed during the inspections, when catheter insertion was done by two nurses. Against this background, a sufficient number of qualified staff and regular ward rounds by the hygiene staff appear recommendable.

Ground-water monitoring compliance projects for Hanford site facilities: Progress report for the period January 1 to March 31, 1988: Volume 8, Appendix B (contd)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-05-01

This appendix is one of nine volumes, and presents data describing wells completed at the Hanford Site during the fourth quarter of calendar year 1987 (October through December). The data in this volume of Appendix B cover the following wells: 299-W18-21; 299-W18-22; 299-W18-23; 299-W18-24. The data are presented in the following order: Well Completion Report/Title III Inspection List, Inspection Plan, As-Built Diagram, Logging Charts, and Drill Logs.

24 CFR 15.102 - Where and when may I inspect and copy records that FOIA requires HUD to make regularly available...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Where and when may I inspect and... Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development PUBLIC..., this information is also available to you through HUD's Internet web site at http://www.hud.gov. [66 FR...

A Longitudinal Study to Assess the Role of Sanitary Inspections in Improving the Hygiene and Food Safety of Eating Establishments in a Tertiary Care Hospital of North India

PubMed Central

Dudeja, Puja; Singh, Amarjeet

2017-01-01

Introduction: Food safety inspections serve two purposes; determine compliance with the law and gather evidence for enforcement if there is noncompliance. The present study was conducted to assess the role of regular inspections on food safety in hospital premises. Methodology: This was an intervention based before and after study. A tool was prepared based on the Food Safety and Standards Regulations (FSSR) (in India) 2011. This included major, critical, and highly critical domains. Each item in the tool scored between 1 and 3 (poor, satisfactory, and good). Based on this, each eating establishment (EE) was given a score on conformance to FSSR 2011. Monthly inspection was made over a year and corrective actions were suggested. Results: The minimum preintervention score was (41.28%), and maximum was (77.25%). There was no significant association between type of meal services and score EE (P > 0.05). Higher proportion of EEs within the hospital building had a satisfactory and good score as compared to EEs outside the hospital building but within hospital premises (P < 0.05). Postintervention, there was a significant change (increase) in the scores of EEs. There was a significant increase in mean scores of EEs under major domains namely maintenance, layout of equipment, monitoring an detection, and elimination of food sources to the pests. Under critical and highly critical domains personal cleanliness, training, and self-inspection by food business operators improved significantly. Conclusion: Regular inspections can improve the food safety standards in EEs. PMID:29184325

A Longitudinal Study to Assess the Role of Sanitary Inspections in Improving the Hygiene and Food Safety of Eating Establishments in a Tertiary Care Hospital of North India.

PubMed

Dudeja, Puja; Singh, Amarjeet

2017-01-01

Food safety inspections serve two purposes; determine compliance with the law and gather evidence for enforcement if there is noncompliance. The present study was conducted to assess the role of regular inspections on food safety in hospital premises. This was an intervention based before and after study. A tool was prepared based on the Food Safety and Standards Regulations (FSSR) (in India) 2011. This included major, critical, and highly critical domains. Each item in the tool scored between 1 and 3 (poor, satisfactory, and good). Based on this, each eating establishment (EE) was given a score on conformance to FSSR 2011. Monthly inspection was made over a year and corrective actions were suggested. The minimum preintervention score was (41.28%), and maximum was (77.25%). There was no significant association between type of meal services and score EE ( P > 0.05). Higher proportion of EEs within the hospital building had a satisfactory and good score as compared to EEs outside the hospital building but within hospital premises ( P < 0.05). Postintervention, there was a significant change (increase) in the scores of EEs. There was a significant increase in mean scores of EEs under major domains namely maintenance, layout of equipment, monitoring an detection, and elimination of food sources to the pests. Under critical and highly critical domains personal cleanliness, training, and self-inspection by food business operators improved significantly. Regular inspections can improve the food safety standards in EEs.

Metric for strong intrinsic fourth-order phonon anharmonicity

NASA Astrophysics Data System (ADS)

Yue, Sheng-Ying; Zhang, Xiaoliang; Qin, Guangzhao; Phillpot, Simon R.; Hu, Ming

2017-05-01

Under the framework of Taylor series expansion for potential energy, we propose a simple and robust metric, dubbed "regular residual analysis," to measure the fourth-order phonon anharmonicity in crystals. The method is verified by studying the intrinsic strong higher-order anharmonic effects in UO2 and CeO2. Comparison of the thermal conductivity results, which calculated by the anharmonic lattice dynamics method coupled with the Boltzmann transport equation and the spectral energy density method coupled with ab initio molecular dynamics simulation further validates our analysis. Analysis of the bulk Si and Ge systems confirms that the fourth-order phonon anharmonicity is enhanced and cannot be neglected at high enough temperatures, which agrees with a previous study where the four-phonon scattering was explicitly determined. This metric will facilitate evaluating and interpreting the lattice thermal conductivity of crystals with strong fourth-order phonon anharmonicity.

An intelligent system for real time automatic defect inspection on specular coated surfaces

NASA Astrophysics Data System (ADS)

Li, Jinhua; Parker, Johné M.; Hou, Zhen

2005-07-01

Product visual inspection is still performed manually or semi automatically in most industries from simple ceramic tile grading to complex automotive body panel paint defect and surface quality inspection. Moreover, specular surfaces present additional challenge to conventional vision systems due to specular reflections, which may mask the true location of objects and lead to incorrect measurements. There are some sophisticated visual inspection methods developed in recent years. Unfortunately, most of them are highly computational. Systems built on those methods are either inapplicable or very costly to achieve real time inspection. In this paper, we describe an integrated low-cost intelligent system developed to automatically capture, extract, and segment defects on specular surfaces with uniform color coatings. The system inspects and locates regular surface defects with lateral dimensions as small as a millimeter. The proposed system is implemented on a group of smart cameras using its on-board processing ability to achieve real time inspection. The experimental results on real test panels demonstrate the effectiveness and robustness of proposed system.

Spacecraft hazard avoidance utilizing structured light

NASA Technical Reports Server (NTRS)

Liebe, Carl Christian; Padgett, Curtis; Chapsky, Jacob; Wilson, Daniel; Brown, Kenneth; Jerebets, Sergei; Goldberg, Hannah; Schroeder, Jeffrey

2006-01-01

At JPL, a <5 kg free-flying micro-inspector spacecraft is being designed for host-vehicle inspection. The spacecraft includes a hazard avoidance sensor to navigate relative to the vehicle being inspected. Structured light was selected for hazard avoidance because of its low mass and cost. Structured light is a method of remote sensing 3-dimensional structure of the proximity utilizing a laser, a grating, and a single regular APS camera. The laser beam is split into 400 different beams by a grating to form a regular spaced grid of laser beams that are projected into the field of view of an APS camera. The laser source and the APS camera are separated forming the base of a triangle. The distance to all beam intersections of the host are calculated based on triangulation.

Monitoring Crack Propagation in Turbine Blades Caused by Thermosonics

NASA Astrophysics Data System (ADS)

Bolu, G.; Gachagan, A.; Pierce, G.; Harvey, G.; Choong, L.

2010-02-01

High-power acoustic excitation of components during a thermosonic (or Sonic IR) inspection may degrade the structural integrity of the component by propagating existing cracks. Process Compensated Resonance Testing (PCRT) technology can be used to detect changes in material properties by comparing a components resonant spectra to a reference spectra at regular intervals after systematic exposure to high-power excitation associated with thermosonic inspection. The objective of this work is to determine whether a typical thermosonic inspection degrades the structural integrity of a turbine blade. In this work, the resonant spectra of six cracked and six uncracked turbine blades are captured before and after a series of thermosonic inspections. Next, these spectra are analyzed using proprietary software for changes in resonant behavior. Results from this work indicate no change in blade resonant behavior for a typical thermosonic inspection.

Automated vehicle for railway track fault detection

NASA Astrophysics Data System (ADS)

Bhushan, M.; Sujay, S.; Tushar, B.; Chitra, P.

2017-11-01

For the safety reasons, railroad tracks need to be inspected on a regular basis for detecting physical defects or design non compliances. Such track defects and non compliances, if not detected in a certain interval of time, may eventually lead to severe consequences such as train derailments. Inspection must happen twice weekly by a human inspector to maintain safety standards as there are hundreds and thousands of miles of railroad track. But in such type of manual inspection, there are many drawbacks that may result in the poor inspection of the track, due to which accidents may cause in future. So to avoid such errors and severe accidents, this automated system is designed.Such a concept would surely introduce automation in the field of inspection process of railway track and can help to avoid mishaps and severe accidents due to faults in the track.

Ground-water monitoring compliance projects for Hanford site facilities: Progress report for the period January 1 to March 31, 1988: Volume 4, Appendix A (contd)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-05-01

This appendix is one of nine volumes, and presents data describing wells completed at the Hanford Site during the fourth quarter of calendar year 1987 (October through December). The data in this volume of Appendix A cover the following wells: 299-E33-30; 299-E34-2; 299-E34-3; 299-E34-4; 299-E34-5; 299-E34-6. The data are presented in the following order: Well Completion Report/Title III Inspection List, Inspection Plan, As-Built Diagram, Logging Charts, and Drill Logs.

[PICS: pharmaceutical inspection cooperation scheme].

PubMed

Morénas, J

2009-01-01

The pharmaceutical inspection cooperation scheme (PICS) is a structure containing 34 participating authorities located worldwide (October 2008). It has been created in 1995 on the basis of the pharmaceutical inspection convention (PIC) settled by the European free trade association (EFTA) in1970. This scheme has different goals as to be an international recognised body in the field of good manufacturing practices (GMP), for training inspectors (by the way of an annual seminar and experts circles related notably to active pharmaceutical ingredients [API], quality risk management, computerized systems, useful for the writing of inspection's aide-memoires). PICS is also leading to high standards for GMP inspectorates (through regular crossed audits) and being a room for exchanges on technical matters between inspectors but also between inspectors and pharmaceutical industry.

Electroplate Short Mix

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2017-06-19

Modifying the surface chemistry of materials by aluminization can protect vulnerable materials from corroding in harsh environments. The industry deals with corrosion issues is to regularly inspect components and replace them with corrosion resistant components.

10 CFR 611.109 - Audit and access to records.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., papers and records of the Borrower or DOE, as applicable. Such inspection may be made during regular... rights hereunder, the Secretary may utilize employees of other Federal agencies, independent accountants...

10 CFR 611.109 - Audit and access to records.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., papers and records of the Borrower or DOE, as applicable. Such inspection may be made during regular... rights hereunder, the Secretary may utilize employees of other Federal agencies, independent accountants...

10 CFR 611.109 - Audit and access to records.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., papers and records of the Borrower or DOE, as applicable. Such inspection may be made during regular... rights hereunder, the Secretary may utilize employees of other Federal agencies, independent accountants...

10 CFR 611.109 - Audit and access to records.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., papers and records of the Borrower or DOE, as applicable. Such inspection may be made during regular... rights hereunder, the Secretary may utilize employees of other Federal agencies, independent accountants...

Alternative Fuels Data Center: CNG Fuel System and Tank Maintenance

Science.gov Websites

in this section... Natural Gas Basics Benefits & Considerations Stations Vehicles Availability fuel containers best practices document for more information. CNG Tank Inspection Performing a regular

49 CFR 7.14 - Requests for records.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., frequency distributions, trends, or comparisons. In those instances where DOT determines that creating a new... be made available for inspection and copying during regular business hours at the place where it is...

49 CFR 7.14 - Requests for records.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., frequency distributions, trends, or comparisons. In those instances where DOT determines that creating a new... be made available for inspection and copying during regular business hours at the place where it is...

76 FR 17353 - Aviation Communications

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-29

... publication). The full text of this document is available for public inspection and copying during regular... Printing, Inc., 445 12th Street, SW., Room CY-B402, Washington, DC 20554. The full text may also be...

Automated exterior inspection of an aircraft with a pan-tilt-zoom camera mounted on a mobile robot

NASA Astrophysics Data System (ADS)

Jovančević, Igor; Larnier, Stanislas; Orteu, Jean-José; Sentenac, Thierry

2015-11-01

This paper deals with an automated preflight aircraft inspection using a pan-tilt-zoom camera mounted on a mobile robot moving autonomously around the aircraft. The general topic is image processing framework for detection and exterior inspection of different types of items, such as closed or unlatched door, mechanical defect on the engine, the integrity of the empennage, or damage caused by impacts or cracks. The detection step allows to focus on the regions of interest and point the camera toward the item to be checked. It is based on the detection of regular shapes, such as rounded corner rectangles, circles, and ellipses. The inspection task relies on clues, such as uniformity of isolated image regions, convexity of segmented shapes, and periodicity of the image intensity signal. The approach is applied to the inspection of four items of Airbus A320: oxygen bay handle, air-inlet vent, static ports, and fan blades. The results are promising and demonstrate the feasibility of an automated exterior inspection.

Fourth-order convergence of a compact scheme for the one-dimensional biharmonic equation

NASA Astrophysics Data System (ADS)

Fishelov, D.; Ben-Artzi, M.; Croisille, J.-P.

2012-09-01

The convergence of a fourth-order compact scheme to the one-dimensional biharmonic problem is established in the case of general Dirichlet boundary conditions. The compact scheme invokes value of the unknown function as well as Pade approximations of its first-order derivative. Using the Pade approximation allows us to approximate the first-order derivative within fourth-order accuracy. However, although the truncation error of the discrete biharmonic scheme is of fourth-order at interior point, the truncation error drops to first-order at near-boundary points. Nonetheless, we prove that the scheme retains its fourth-order (optimal) accuracy. This is done by a careful inspection of the matrix elements of the discrete biharmonic operator. A number of numerical examples corroborate this effect. We also present a study of the eigenvalue problem uxxxx = νu. We compute and display the eigenvalues and the eigenfunctions related to the continuous and the discrete problems. By the positivity of the eigenvalues, one can deduce the stability of of the related time-dependent problem ut = -uxxxx. In addition, we study the eigenvalue problem uxxxx = νuxx. This is related to the stability of the linear time-dependent equation uxxt = νuxxxx. Its continuous and discrete eigenvalues and eigenfunction (or eigenvectors) are computed and displayed graphically.

State Compliance Monitoring Expectations | ECHO | US EPA

EPA Pesticide Factsheets

EPA sets national goals for how frequently facilities should be evaluated by the authorized enforcement agency for three programs included in ECHO (Clean Air Act, Clean Water Act, and Resource Conservation and Recovery Act). EPA develops Compliance Monitoring Strategies (CMSs) to ensure that the regulated facilities across the country are evaluated for compliance on a regular basis. Information on CMSs, evaluations (such as on-site inspections), and inspection frequency goals that are defined by each program is included.

School, family and adolescent smoking.

PubMed

Yañez, Aina; Leiva, Alfonso; Gorreto, Lucia; Estela, Andreu; Tejera, Elena; Torrent, Maties

2013-01-01

The socio-cultural environment is an important factor involved with the onset of smoking during adolescence. Initiation of cigarette smoking occurs almost exclusively during this stage. In this context we aimed to analyze the association of school and family factors with adolescent smoking by a cross-sectional study of 16 secondary schools randomly selected from the Balearic Islands involved 3673 students and 530 teachers. The prevalence of regular smoking (at least one cigarette per week) was 4.8% among first year students, 11.6% among second year students, 14.1% among third year students, 20.9% among fourth year students and 22% among teachers. Among first and second year students, there were independent associations between regular smoking and adolescents' perception of being allowed to smoke at home, belonging to a single parent family, poor relationship with parents, poor academic performance, lack of interest in studies and teachers' perception of smoking in the presence of pupils. Among third and fourth year students, there were independent associations between regular smoking and poor relationship with parents, adolescents' perception of being allowed to smoke at home, poor academic performance, lack of control over student misbehavior and the school attended. The school policies and practices affect student related health behavior regarding smoking, independent of individual and family factors.

7 CFR 58.146 - Cleaning and sanitizing treatment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... seal assemblies shall be removable on all agitators, pumps, and vats and shall be inspected at regular... above the floor in clean, dry locations and in a self draining position on racks constructed of...

KSC-03pd0262

NASA Image and Video Library

2003-02-04

KENNEDY SPACE CENTER, FLA. -- United Space Alliance (USA) technicians install thermal protection system tiles on Space Shuttle Discovery. Discovery is undergoing its Orbiter Major Modification Period, a regularly scheduled structural inspection and modification downtime, which began in September 2002. .

Public knowledge and attitudes regarding public health inspections of restaurants.

PubMed

Jones, Timothy F; Grimm, Karen

2008-06-01

Foodborne diseases cause 76 million illnesses in the U.S. each year, and almost half of all money spent on food is spent in restaurants. Restaurant inspections are a critical public health intervention for the prevention of foodborne disease. A telephone survey of randomly selected Tennessee residents aged > or =18 was performed. Data were collected on respondents' demographics, knowledge, attitudes, and expectations regarding restaurant inspections. Of 2000 respondents, 97% were aware that restaurants are inspected regularly by the health department. More than half of the respondents believed that inspections should be performed at least 12 times per year; only one third were aware that inspections currently occur only twice per year in Tennessee. More than one third of the respondents considered an inspection score of > or =90 acceptable for a restaurant at which they would eat; the mean score in Tennessee is 82. When presented with a variety of scenarios, an overwhelming number of respondents felt that public health responses to safety violations should be far more draconian than they actually are. Survey answers did not differ consistently based on respondents' race, gender, or history of having worked in a restaurant. This study identified a number of public misconceptions and unrealistically high expectations of the public health restaurant-inspection system. It is important to improve consumers' understanding of inspection scores and the limitations of regulatory inspections, as well as the role of such inspections in disease prevention.

Remote Monitoring of Cathodic Protection and Cathodic Protection System Upgrades for Tanks and Pipelines at Fort Carson

DTIC Science & Technology

2007-06-01

HOISTS, CRANES AND DERRICKS ο ο Cables and sheaves regularly inspected ο ο Slings and chains, hooks and eyes inspected before each use ο ο Equipment...osion from soil corrosion, bacterial corrosion, and stress corrosion cracking. • Cathodic protection is applicable over a wide range of e...should be flat against the material. Bent rivets will fail under stress . Especially note condition of Dee Ring rivets and Dee Ring metal wear pads

U. S. Naval Forces, Vietnam Monthly Historical Supplement for July 1968

DTIC Science & Technology

1969-05-06

o . . 1 . i & Operation MARKET TIME. *. . .. .. ... . ..0 - . .. -1 MARKET TIME Units... .... ... . .o. .e. . . . 18 - MARKET TME Statistical...incursions into unpatrolled rivers, A record number -of naval gunfire support missions were fired by MARKET TBE units. GAME WARDEN patrol craft...and Fourth Coastal Zone Operations . . .• 16 5. (G) MARKET TIME Detections, Inspections, Boardings . , 20 6. (G) STABLE DOOR Detections, Ins~nctios9

Canada First: The 2009 Survey of International Students

ERIC Educational Resources Information Center

Humphries, Jennifer, Ed.; Knight-Grofe, Janine, Ed.; Klabunde, Niels, Ed.

2009-01-01

The Canadian Bureau for International Education (CBIE) regularly evaluates the experience of international students in Canada through a benchmarking survey. Canada First 2009 represents the fourth time CBIE has conducted this research. Previous editions appeared in 1988, 1999 and 2004. This year's survey used a revised questionnaire similar to…

Evaluation of the ADHD Rating Scale in Youth with Autism

ERIC Educational Resources Information Center

Yerys, Benjamin E.; Nissley-Tsiopinis, Jenelle; de Marchena, Ashley; Watkins, Marley W.; Antezana, Ligia; Power, Thomas J.; Schultz, Robert T.

2017-01-01

Scientists and clinicians regularly use clinical screening tools for attention deficit/hyperactivity disorder (ADHD) to assess comorbidity without empirical evidence that these measures are valid in youth with autism spectrum disorder (ASD). We examined the prevalence of youth meeting ADHD criteria on the ADHD rating scale fourth edition…

Childhood Fears, Neurobehavioral Functioning and Behavior Problems in School-Age Children

ERIC Educational Resources Information Center

Kushnir, Jonathan; Sadeh, Avi

2010-01-01

The objective is to examine underlying associations between childhood fears, behavior problems and neurobehavioral functioning (NBF) in school-age children. Healthy, regular school children (N = 135), from second, fourth and sixth grade classes were assessed. Data regarding children's fears and behavioral problems were obtained with the Revised…

Recent advances in sterol research

USDA-ARS?s Scientific Manuscript database

Since 1970, the AOCS has been a regular host to the sterol symposia. The 2008 Sterol Symposium, “Recent Advances in Sterol Research,” was held at the AOCS Annual Meeting in Seattle, Washington. This year the symposium held special significance, for it hosted the presentation of the fourth G.J. Schro...

Classroom Strategies and Behaviors Facilitating Continued Scholastic Growth

ERIC Educational Resources Information Center

Scott-Moore, Charlotte; Mitchell, Ronald

2017-01-01

The researchers conducted a qualitative study involving two rural public school districts in Tennessee. The purpose of this study was to discover classroom strategies and behaviors that enable regular classroom teachers to facilitate continued scholastic growth of fourth and fifth grade students who had experienced notable academic gains in their…

76 FR 53127 - Notice of Suspension and Commencement of Proposed Debarment Proceedings; Schools and Libraries...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-25

... . The text may also be purchased from the Commission's duplicating inspection and copying during regular... through August 2005 you offered and delivered $28,500 in bribes and kickbacks to various school officials...

Frame Shift/warp Compensation for the ARID Robot System

NASA Technical Reports Server (NTRS)

Latino, Carl D.

1991-01-01

The Automatic Radiator Inspection Device (ARID) is a system aimed at automating the tedious task of inspecting orbiter radiator panels. The ARID must have the ability to aim a camera accurately at the desired inspection points, which are in the order of 13,000. The ideal inspection points are known; however, the panel may be relocated due to inaccurate parking and warpage. A method of determining the mathematical description of a translated as well as a warped surface by accurate measurement of only a few points on this surface is developed here. The method uses a linear warp model whose effect is superimposed on the rigid body translation. Due to the angles involved, small angle approximations are possible, which greatly reduces the computational complexity. Given an accurate linear warp model, all the desired translation and warp parameters can be obtained by knowledge of the ideal locations of four fiducial points and the corresponding measurements of these points on the actual radiator surface. The method uses three of the fiducials to define a plane and the fourth to define the warp. Given this information, it is possible to determine a transformation that will enable the ARID system to translate any desired inspection point on the ideal surface to its corresponding value on the actual surface.

46 CFR 380.21 - Reproduction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... reproduction processes: (1) Microfilm. The film stock used in making photographic or microphotographic copies shall comply with Interim Federal Standard No. 125 covering photographic film and processed photographic film. The microfilm shall be regularly inspected for aging in accordance with Handbook 96, entitled...

Silent internal sinus of the pyriform fossa: a rare adult manifestation of a branchial anomaly.

PubMed

Lin, Chao-Jung; Lin, Yaoh-Shiang; Kang, Bor-Hwang; Lee, Jin-Chin

2003-03-01

Branchial anomalies present with a wide range of pathologic characteristics, including cysts, fistulas, and sinuses of the head and neck region. Branchial cysts are most commonly diagnosed during the second through fourth decades of life, while branchial sinuses and fistulas are diagnosed almost exclusively in children with infection episodes. Only rarely has an internal sinus of a third or fourth branchial anomaly manifested in adults as a noninfectious swelling in the neck during swallowing. In this report, we describe our experience treating a 21-year-old man with a left-sided swallowing-induced neck protrusion of 10 years' duration. Findings of physical examination, videolaryngoscopy, and a pharyngoesophagogram confirmed the diagnosis of internal sinus of the pyriform fossa, with uncertain origin of a third or fourth branchial anomaly. The patient underwent regular follow-up as an outpatient and experienced no further infectious episodes.

A Missing Piece in Clinical Trial Inspections in Latin America: Interviews With Research Subjects in Peru.

PubMed

Minaya, Gabriela E; Fuentes-Delgado, Duilio J; Ugalde, Antonio; Homedes, Núria

2017-10-01

Most regulatory agencies conduct clinical trial (CT) site inspections, but the experiences and behaviors of research subjects and their knowledge of the rights and obligations that ensue from participating in a CT are seldom explored. The authors assessed the technical feasibility of incorporating interviews with participants in CT inspections. This article analyzes the responses of 13 CT participants, 14% ( n = 96) of those included in three tuberculosis (TB) CTs. Participants did not object to being interviewed and provided information not obtained during regular inspections. Participants were appreciative of the agency's concern for the integrity of the CT process. Most interviewees did not understand the consent form and were unaware that they were participating in an experiment with unapproved new drugs. Participants' decision to enroll in CT related to undue inducement and therapeutic misconception. Some patients' behaviors, undisclosed to researchers, could have compromised the integrity of the data collected.

The Effect of Testing Condition on Word Guessing in Elementary School Children

ERIC Educational Resources Information Center

Mannamaa, Mairi; Kikas, Eve; Raidvee, Aire

2008-01-01

Elementary school children's word guessing is studied, and the results from individual and collective testing conditions are compared. The participants are 764 students from the second, third, and fourth grades (ages 8-11, 541 students from mainstream regular classes and 223 students with learning disabilities). About half of these students are…

Submittal of Final Post-Closure Inspection Letter Report for Corrective Action Unit 112: Area 23 Hazardous Waste Trenches, Nevada Test Site, Nevada, Revision 0, December 2007; DOE/NV--1103

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Restoration

This letter serves as the post-closure monitoring letter report for the above Corrective Action Unit (CAU) for the period October 2006-September 2007. Quarterly inspections were conducted on December 20,2006; March 29,2007; June 13,2007; and September 27, 2007, to observe the condition of the gate, use restriction warning signs, monuments, fencing, trenches, soil covers, and monitoring well covers. The first inspection was conducted on December 20,2006. Signs, fencing, riprap, monuments, and monitoring well covers were in excellent condition. No cracking, erosion, or subsidence was observed on the covers. No issues or concerns were identified, and no corrective actions were recommended. Themore » second inspection was conducted on March 29,2007. Signs, fencing, riprap, monuments, and monitoring well covers were in excellent condition. No cracking, erosion, or subsidence was observed on the covers. Vegetation that was observed to be growing in several locations on the cover was the only identified concern, for which removal was recommended. Vegetation was removed on May 24,2007. The third inspection was conducted on June 13,2007. Signs, fencing, riprap, monuments, and monitoring well covers were in excellent condition. No cracking, erosion, or subsidence was observed on the covers. No issues or concerns were identified, and no corrective actions were recommended. The fourth inspection was conducted on September 27,2007. Signs, fencing, riprap, monuments, and monitoring well covers were in excellent condition. No cracking, erosion, or subsidence was observed on the covers. No issues or concerns were identified, and no corrective actions were recommended. The post-closure inspection checklists for CAU 112 are attached. Photographs and field notes taken during site inspections are maintained in the project files.« less

How to Get Hearing Aids

MedlinePlus

... batteries and hearing aids away from children and pets. We recommend visiting a hearing healthcare professional on a regular basis to have your hearing aids inspected. More in Hearing Aids Hearing Loss Types of Hearing Aids Benefits and Safety Issues Hearing Aids and Cell Phones ...

Semilocal momentum-space regularized chiral two-nucleon potentials up to fifth order

NASA Astrophysics Data System (ADS)

Reinert, P.; Krebs, H.; Epelbaum, E.

2018-05-01

We introduce new semilocal two-nucleon potentials up to fifth order in the chiral expansion. We employ a simple regularization approach for the pion exchange contributions which i) maintains the long-range part of the interaction, ii) is implemented in momentum space and iii) can be straightforwardly applied to regularize many-body forces and current operators. We discuss in detail the two-nucleon contact interactions at fourth order and demonstrate that three terms out of fifteen used in previous calculations can be eliminated via suitably chosen unitary transformations. The removal of the redundant contact terms results in a drastic simplification of the fits to scattering data and leads to interactions which are much softer ( i.e., more perturbative) than our recent semilocal coordinate-space regularized potentials. Using the pion-nucleon low-energy constants from matching pion-nucleon Roy-Steiner equations to chiral perturbation theory, we perform a comprehensive analysis of nucleon-nucleon scattering and the deuteron properties up to fifth chiral order and study the impact of the leading F-wave two-nucleon contact interactions which appear at sixth order. The resulting chiral potentials at fifth order lead to an outstanding description of the proton-proton and neutron-proton scattering data from the self-consistent Granada-2013 database below the pion production threshold, which is significantly better than for any other chiral potential. For the first time, the chiral potentials match in precision and even outperform the available high-precision phenomenological potentials, while the number of adjustable parameters is, at the same time, reduced by about ˜ 40%. Last but not least, we perform a detailed error analysis and, in particular, quantify for the first time the statistical uncertainties of the fourth- and the considered sixth-order contact interactions.

49 CFR 7.10 - Public records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... holidays, during regular working hours. The Saint Lawrence Seaway Development Corporation has facilities at... hours of operation are 10:00-17:00 eastern time. (b) Certain DOT components also maintain public record... facilities for manual records. Additional information on the location and hours of operations for inspection...

High speed ground penetrating radar for road pavement and bridge structural inspection and maintenance : final report.

DOT National Transportation Integrated Search

2016-06-30

The overarching objective of this research is the development of a systematic methodology of employing GPR, including instruments, subsequent data processing and interpretation that can be used regularly as part of a roadway pavement and bridge evalu...

41 CFR 101-39.303 - Maintenance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MANAGEMENT SYSTEMS 39.3-Use and Care of GSA Interagency Fleet Management System Vehicles § 101-39.303...) vehicles, safety and preventive maintenance inspections will be performed at regularly scheduled intervals as directed by GSA. Users of GSA IFMS vehicles shall comply with the safety and preventive...

From the Paper to the Tablet: On the Design of an AR-Based Tool for the Inspection of Pre-Fab Buildings. Preliminary Results of the SIRAE Project.

PubMed

Portalés, Cristina; Casas, Sergio; Gimeno, Jesús; Fernández, Marcos; Poza, Montse

2018-04-19

Energy-efficient Buildings (EeB) are demanded in today’s constructions, fulfilling the requirements for green cities. Pre-fab buildings, which are modularly fully-built in factories, are a good example of this. Although this kind of building is quite new, the in situ inspection is documented using traditional tools, mainly based on paper annotations. Thus, the inspection process is not taking advantage of new technologies. In this paper, we present the preliminary results of the SIRAE project that aims to provide an Augmented Reality (AR) tool that can seamlessly aid in the regular processes of pre-fab building inspections to detect and eliminate the possible existing quality and energy efficiency deviations. In this regards, we show a description of the current inspection process and how an interactive tool can be designed and adapted to it. Our first results show the design and implementation of our tool, which is highly interactive and involves AR visualizations and 3D data-gathering, allowing the inspectors to quickly manage it without altering the way the inspection process is done. First trials on a real environment show that the tool is promising for massive inspection processes.

From the Paper to the Tablet: On the Design of an AR-Based Tool for the Inspection of Pre-Fab Buildings. Preliminary Results of the SIRAE Project

PubMed Central

Fernández, Marcos; Poza, Montse

2018-01-01

Energy-efficient Buildings (EeB) are demanded in today’s constructions, fulfilling the requirements for green cities. Pre-fab buildings, which are modularly fully-built in factories, are a good example of this. Although this kind of building is quite new, the in situ inspection is documented using traditional tools, mainly based on paper annotations. Thus, the inspection process is not taking advantage of new technologies. In this paper, we present the preliminary results of the SIRAE project that aims to provide an Augmented Reality (AR) tool that can seamlessly aid in the regular processes of pre-fab building inspections to detect and eliminate the possible existing quality and energy efficiency deviations. In this regards, we show a description of the current inspection process and how an interactive tool can be designed and adapted to it. Our first results show the design and implementation of our tool, which is highly interactive and involves AR visualizations and 3D data-gathering, allowing the inspectors to quickly manage it without altering the way the inspection process is done. First trials on a real environment show that the tool is promising for massive inspection processes. PMID:29671799

Inline inspection of textured plastics surfaces

NASA Astrophysics Data System (ADS)

Michaeli, Walter; Berdel, Klaus

2011-02-01

This article focuses on the inspection of plastics web materials exhibiting irregular textures such as imitation wood or leather. They are produced in a continuous process at high speed. In this process, various defects occur sporadically. However, current inspection systems for plastics surfaces are able to inspect unstructured products or products with regular, i.e., highly periodic, textures, only. The proposed inspection algorithm uses the local binary pattern operator for texture feature extraction. For classification, semisupervised as well as supervised approaches are used. A simple concept for semisupervised classification is presented and applied for defect detection. The resulting defect-maps are presented to the operator. He assigns class labels that are used to train the supervised classifier in order to distinguish between different defect types. A concept for parallelization is presented allowing the efficient use of standard multicore processor PC hardware. Experiments with images of a typical product acquired in an industrial setting show a detection rate of 97% while achieving a false alarm rate below 1%. Real-time tests show that defects can be reliably detected even at haul-off speeds of 30 m/min. Further applications of the presented concept can be found in the inspection of other materials.

Project: "Teach 'n' Reach" Learning Handicapped: Developmentally Disabled, Learning Disabled. (Book 3 out of 4.)

ERIC Educational Resources Information Center

Kagan, Arleen

The fourth of five volumes (and the third of four curriculum guides) in the Project Teach 'n' Reach series presents curriculum suggestions to help regular classroom teachers teach nondisabled students about learning handicaps. The developmentally disabled are considered in terms of anatomical structures of the brain, etiology, definition, sensory…

The Differential Effects of Fiction and Nonfiction Literature: Increasing Acceptance of Children with Disabilities.

ERIC Educational Resources Information Center

Sipsas-Herrmann, Athanasia; And Others

A bibliotherapy intervention was used to foster acceptance of children with disabilities by their nondisabled peers. The study involved 247 regular students in fourth, fifth, and sixth grade non-integrated classrooms at one elementary school. Treatment students read either fiction or nonfiction literature, followed by discussion of the material.…

Numerical solution of the wave equation with variable wave speed on nonconforming domains by high-order difference potentials

NASA Astrophysics Data System (ADS)

Britt, S.; Tsynkov, S.; Turkel, E.

2018-02-01

We solve the wave equation with variable wave speed on nonconforming domains with fourth order accuracy in both space and time. This is accomplished using an implicit finite difference (FD) scheme for the wave equation and solving an elliptic (modified Helmholtz) equation at each time step with fourth order spatial accuracy by the method of difference potentials (MDP). High-order MDP utilizes compact FD schemes on regular structured grids to efficiently solve problems on nonconforming domains while maintaining the design convergence rate of the underlying FD scheme. Asymptotically, the computational complexity of high-order MDP scales the same as that for FD.

78 FR 32991 - Connect America Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-03

..., 2013. The full text of this document is available for public inspection during regular business hours.... Introduction 1. In the USF/ICC Transformation Order, 76 FR 73830, November 29, 2011, the Commission... the USF/ICC Transformation Order, an unsubsidized competitor in areas where the price cap carrier will...

23 CFR 140.607 - Construction.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Construction. 140.607 Section 140.607 Highways FEDERAL... Bond Issue Projects § 140.607 Construction. Construction shall be supervised by the SHA in the same manner as for regularly financed Federal-aid projects. The FHWA will make construction inspections and...

23 CFR 140.607 - Construction.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Construction. 140.607 Section 140.607 Highways FEDERAL... Bond Issue Projects § 140.607 Construction. Construction shall be supervised by the SHA in the same manner as for regularly financed Federal-aid projects. The FHWA will make construction inspections and...

23 CFR 140.607 - Construction.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Construction. 140.607 Section 140.607 Highways FEDERAL... Bond Issue Projects § 140.607 Construction. Construction shall be supervised by the SHA in the same manner as for regularly financed Federal-aid projects. The FHWA will make construction inspections and...

23 CFR 140.607 - Construction.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Construction. 140.607 Section 140.607 Highways FEDERAL... Bond Issue Projects § 140.607 Construction. Construction shall be supervised by the SHA in the same manner as for regularly financed Federal-aid projects. The FHWA will make construction inspections and...

23 CFR 140.607 - Construction.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Construction. 140.607 Section 140.607 Highways FEDERAL... Bond Issue Projects § 140.607 Construction. Construction shall be supervised by the SHA in the same manner as for regularly financed Federal-aid projects. The FHWA will make construction inspections and...

30 CFR 75.807 - Installation of high-voltage transmission cables.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of high-voltage transmission...-Voltage Distribution § 75.807 Installation of high-voltage transmission cables. [Statutory Provisions] All underground high-voltage transmission cables shall be installed only in regularly inspected air courses and...

Experimental tests and numerical analyses of steel truss bridge gusset connections.

DOT National Transportation Integrated Search

2012-11-01

Gusset plates connect individual steel truss bridge members together at a node. In 10% of the 200,000 steel bridges in US in 2008, failure of a : single truss or connection could lead to collapse. Regular inspection and load rating are essential for ...

7 CFR 46.21 - Returns, rejections, or credit memorandums on sales.

Code of Federal Regulations, 2010 CFR

2010-01-01

... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE MARKETING OF PERISHABLE AGRICULTURAL COMMODITIES REGULATIONS (OTHER THAN RULES OF PRACTICE) UNDER THE PERISHABLE AGRICULTURAL... credit memorandum is filed. The credit memorandum shall be on a regular form, in a ledger book, or on a...

76 FR 81462 - Preliminary Plan for Retrospective Analysis of Existing Rules

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-28

... order to identify unnecessary or unduly burdensome regulations that may be hindering job creation and... inspection and copying during regular business hours in the Commission's Reference Information Center... Express Mail and Priority Mail) must be sent to 9300 East Hampton Drive, Capitol Heights, MD 20743...

29 CFR 1903.22 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor, to conduct inspections. (e) Area Director means the employee or officer regularly or temporarily... Labor, or any other person or persons who are authorized to act for such employee or officer. The latter authorizations may include general delegations of the authority of an Area Director under this part to a...

42 CFR 403.744 - Condition of participation: Life safety from fire.

Code of Federal Regulations, 2010 CFR

2010-10-01

... written fire control plans that contain provisions for prompt reporting of fires; extinguishing fires...) The RNHCI must maintain written evidence of regular inspection and approval by State or local fire... contrary, the RNHCI may place alcohol-based hand rub dispensers in its facility if— (i) Use of alcohol...

78 FR 49374 - Rural Development Voucher Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-14

...) 512-1800, or access GPO's online bookstore at http://bookstore.gpo.gov/ . Paperwork Reduction Act of... contains notices to the public of #0;the proposed issuance of rules and regulations. The purpose of these... written comments will be available for public inspection during regular work hours at the 300 7th Street...

76 FR 18679 - Wireless Telecommunications Bureau Invites Comment on Draft Environmental Notice Requirements and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-05

... Documents: Comments and ex parte submissions will be available for public inspection during regular business... the proposal to the local community, and the Commission would post information about the proposal on... the tower would have a significant environmental impact. Ex Parte Presentations. This proceeding shall...

9 CFR 391.4 - Laboratory services rate.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Laboratory services rate. 391.4 Section 391.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... dividing the Office of Public Health Science (OPHS) previous fiscal year's regular direct pay by OPHS...

9 CFR 391.4 - Laboratory services rate.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Laboratory services rate. 391.4 Section 391.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... dividing the Office of Public Health Science (OPHS) previous fiscal year's regular direct pay by OPHS...

9 CFR 391.4 - Laboratory services rate.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Laboratory services rate. 391.4 Section 391.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... dividing the Office of Public Health Science (OPHS) previous fiscal year's regular direct pay by OPHS...

Impact of a Teacher-Led Intervention on Preference for Self-Regulated Learning, Finding Main Ideas in Expository Texts, and Reading Comprehension

ERIC Educational Resources Information Center

Stoeger, Heidrun; Sontag, Christine; Ziegler, Albert

2014-01-01

We examined the impact of a teacher-led intervention, implemented during regular classroom instruction and homework, on fourth-grade students' preference for self-regulated learning, finding main ideas in expository texts, and reading comprehension. In our quasi-experimental study with intact classrooms, (a) students (n = 266, 12 classrooms) who…

Telework in Australia: Findings from a National Survey in Selected Industries.

ERIC Educational Resources Information Center

Lafferty, George; Whitehouse, Gillian

2000-01-01

A survey of 2,528 Australian organizations found that 44% had used some teleworkers, 15% did regularly. Larger organizations were more likely to use them. Most telework was done at home. In one-third of companies all teleworkers were male, in one-fourth over 75% were female. Teleworkers were most likely to be in management, information technology,…

National Dam Safety Program. Willow Brook Dam (Inventory Number NY 35). Lower Hudson River Basin, Orange County, New York. Phase I Inspection Report,

DTIC Science & Technology

1981-08-14

ia danger of l~>ee of huaar. . i f e fro« .arge flowa downatrea« of the daa Therefore Willow Brook De« is considered to be in the "high" hazard...and Surveyor (the application la included in Appendix G) 2 * Of WAT IOW RECORDS The «lids gats controlling dischargea ia opened approxi...lake ahors Once the lake lsvsl dropa to apillway lsvsl. the gsts ia cloaed The owner haa no procedures ’or regular dam inspectiona or regular

U.S. Department of Energy Office of Legacy Management's Tribal Interactions - 12513

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gil, April; Shafer, David; Elmer, John

2012-07-01

Effective government-to-government interactions with tribal nations and maintaining stakeholder relations with members of tribes are increasingly important to the U.S. Department of Energy (DOE) Office of Legacy Management (LM). As of October 2011, LM was responsible for long-term surveillance and maintenance of 87 sites and facilities in the continental U.S. and Puerto Rico, including some sites on tribal lands. The sites on tribal lands can affect natural resources that are managed or used by tribes, or the sites can potentially affect areas of cultural significance to tribal nations in Alaska, Arizona, Colorado, New Mexico, Utah, Washington, and Wyoming. Tribes aremore » separate sovereign governments recognized in the U.S. Constitution and are significant stakeholders for LM sites. The tribes are individual nations with diverse histories, cultures, customs, religions, and laws. LM has regular communication with the affected tribes to inform members of issues, to allow the tribe to participate in decision making, to provide technical reviews, and to ensure tribal concerns are addressed. Four LM sites are in the Navajo Nation. Three of those sites contain uranium mill tailings disposal cells regulated under long-term surveillance and maintenance programs that require monitoring and annual inspections. The fourth site was remediated but still has a groundwater plume that LM is responsible for. DOE and LM have worked with the Navajo Nation for almost 30 years on technical issues and to ensure tribal concerns are addressed. (authors)« less

Advanced algorithms for radiographic material discrimination and inspection system design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, Andrew J.; McDonald, Benjamin S.; Deinert, Mark R.

X-ray and neutron radiography are powerful tools for non-invasively inspecting the interior of objects. Materials can be discriminated by noting how the radiographic signal changes with variations in the input spectrum or inspection mode. However, current methods are limited in their ability to differentiate when multiple materials are present, especially within large and complex objects. With X-ray radiography, the inability to distinguish materials of a similar atomic number is especially problematic. To overcome these critical limitations, we augmented our existing inverse problem framework with two important expansions: 1) adapting the previous methodology for use with multi-modal radiography and energy-integrating detectors,more » and 2) applying the Cramer-Rao lower bound to select an optimal set of inspection modes for a given application a priori. Adding these expanded capabilities to our algorithmic framework with adaptive regularization, we observed improved discrimination between high-Z materials, specifically plutonium and tungsten. The combined system can estimate plutonium mass within our simulated system to within 1%. Three types of inspection modes were modeled: multi-endpoint X-ray radiography alone; in combination with neutron radiography using deuterium-deuterium (DD); or in combination with neutron radiography using deuterium-tritium (DT) sources.« less

The Effects of a Story-Mapping Procedure to Improve the Comprehension Skills of Expository Text Passages for Elementary Students with Learning Disabilities

ERIC Educational Resources Information Center

Stagliano, Christina; Boon, Richard T.

2009-01-01

The purpose of this study was to examine the effects of using a story-mapping procedure to improve and enhance the reading comprehension skills using expository text passages for 3 fourth-grade students with learning disabilities (LD). The study was conducted in the resource classroom in which the participants regularly received reading…

Changes in Instructional Hours in Four Subjects by Public School Teachers of Grades 1 through 4. Stats in Brief. NCES 2007-305

ERIC Educational Resources Information Center

Morton, Beth A.; Dalton, Ben

2007-01-01

This brief report uses data from five administrations of the Schools and Staffing Survey (SASS) to examine the distribution of weekly instructional hours by regular, full-time first- through fourth-grade teachers of self-contained classrooms in four subjects: English/reading/language arts; arithmetic/mathematics; social studies/history; and,…

Elementary School Children with Persistent Emotional Disturbances: A Summary Report of a Study in Onondaga County, N.Y.

ERIC Educational Resources Information Center

New York State Dept. of Mental Hygiene, Albany.

Each of 7,056 children (3,607 boys and 3,449 girls) attending regular elementary school classes were rated by their fourth grade teacher and again by their sixth grade teacher to determine the prevalence of persistent emotional disturbances within the student population of 17 public school districts. Based on teachers' ratings of the student's…

76 FR 63257 - Facilitating the Deployment of Text-to-911 and Other Next Generation 911 Applications; Framework...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... 11-134] Facilitating the Deployment of Text-to-911 and Other Next Generation 911 Applications... 911 Public Safety Answering Points (PSAPs) via text, photos, videos, and data and enhance the... 22, 2011. The full text of this document is available for public inspection during regular business...

78 FR 59633 - Wireless Telecommunications Bureau Opens Docket To Seek Comment on DISH Network Corporation's...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... inspection during regular business hours in the FCC Reference Center, Federal Communications Commission, 445... LLC and New DBSD Satellite Services G.P. (collectively, DISH), filed a Petition for Waiver and a... held by its wholly-owned subsidiaries, Gamma Acquisition LLC (Call Signs T060430001-T060430176) and New...

76 FR 37059 - Agency Information Collection Activities: Proposed Collection; Comment Request-Form FNS-339...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... Nutrition Program for Women, Infants and Children (WIC); the WIC Farmers' Market Nutrition Program (FMNP... be open for public inspection at the office of the Food and Nutrition Service during regular business... State budget restrictions or limitations including, at a minimum, hiring freezes, work furloughs, and...

78 FR 9331 - Kiwifruit Grown in California; Proposed Amendments to Marketing Order

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-08

... public inspection in the Office of the Docket Clerk during regular business hours, or can be viewed at..., Fax: (202) 720-8938 or Email: [email protected] . Small businesses may request information... district in which the handler is an inhabitant, or has his or her principal place of business, has...

40 CFR 112.8 - Spill Prevention, Control, and Countermeasure Plan requirements for onshore facilities (excluding...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Bulk storage containers. (1) Not use a container for the storage of oil unless its material and... of the largest single container and sufficient freeboard to contain precipitation. You must ensure... conditions. (6) Test or inspect each aboveground container for integrity on a regular schedule and whenever...

40 CFR 112.8 - Spill Prevention, Control, and Countermeasure Plan requirements for onshore facilities (excluding...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Bulk storage containers. (1) Not use a container for the storage of oil unless its material and... of the largest single container and sufficient freeboard to contain precipitation. You must ensure... conditions. (6) Test or inspect each aboveground container for integrity on a regular schedule and whenever...

40 CFR 112.8 - Spill Prevention, Control, and Countermeasure Plan requirements for onshore facilities (excluding...

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Bulk storage containers. (1) Not use a container for the storage of oil unless its material and... of the largest single container and sufficient freeboard to contain precipitation. You must ensure... conditions. (6) Test or inspect each aboveground container for integrity on a regular schedule and whenever...

41 CFR 102-192.140 - What are your general responsibilities as a Federal mail center manager?

Code of Federal Regulations, 2013 CFR

2013-07-01

... transmission of data in lieu of mail, reducing the number of handwritten addresses on outgoing mail, and other... processing activities at the facility, including all regularly scheduled, small package, and expedited... security office, the Postal Inspection Service, or other appropriate authority; (k) Track incoming packages...

40 CFR 1601.20 - Requests for records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... request. Records to be obtained in person will be available for inspection or copying during business hours on a regular business day in the office of the CSB. (b) Description of records. Each request must... satisfying a request for records; (2) Provide records not yet in existence, even if such records may be...

75 FR 266 - Customs and Border Protection's Bond Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-05

... authority to approve single transaction bonds will remain with port directors. The changes proposed in this... accommodate the use of information technology and modern business practices. DATES: Comments must be received... may also be inspected during regular business days between the hours of 9 a.m. and 4:30 p.m. at the...

Design of on line detection system for static evaporation rate of LNG vehicle cylinders

NASA Astrophysics Data System (ADS)

Tang, P.; Wang, M.; Tan, W. H.; Ling, Z. W.; Li, F.

2017-06-01

In order to solve the problems existing in the regular inspection of LNG vehicle cylinders, the static evaporation rate on line detection system of LNG cylinders is discussed in this paper. A non-disassembling, short-term and high-efficiency on line detection system for LNG vehicle cylinders is proposed, which can meet the requirement of evaporation rate test under different media and different test pressures. And then test methods under the experimental conditions, atmospheric pressure and pressure are given respectively. This online detection system designed in this paper can effectively solve the technical problems during the inspection of the cylinder.

Health-related behaviors associated with subjective sleep insufficiency in Japanese workers: A cross-sectional study.

PubMed

Kageyama, Makoto; Odagiri, Keiichi; Mizuta, Isagi; Yamamoto, Makoto; Yamaga, Keiko; Hirano, Takako; Onoue, Kazue; Uehara, Akihiko

2017-03-28

Sleep disturbances are related to somatic and mental disorders, industrial accidents, absenteeism, and retirement because of disability. We aimed to identify health-related behaviors associated with subjective sleep insufficiency in Japanese workers. This cross-sectional study included 5,297 employees (mean age: 43.6±11.3 years; 4,039 men). Multiple logistic regression analysis was used to identify health-related behaviors associated with subjective sleep insufficiency. Overall, 28.2% of participants experienced subjective sleep insufficiency. There was a significant difference between the genders in the proportion of participants with subjective sleep insufficiency (male: 26.4%; female: 34.3%; p<0.001). Multiple logistic regression analysis revealed that being a female or ≥40 years, experiencing a weight change of ≥3 kg during the preceding year, not exercising regularly, not walking quickly, and eating a late-evening or fourth meal were associated with subjective sleep insufficiency. After stratifying by gender, age ≥40 years, not exercising regularly, and eating a late-evening or fourth meal were significantly associated with subjective sleep insufficiency in both genders. Not walking quickly, experiencing a weight change, and eating quickly were positively associated with subjective sleep insufficiency only for males. Females who did not engage in physical activity were more likely to have experienced subjective sleep insufficiency, but this relationship was not observed in males. The results indicated that certain health-related behaviors, specifically not exercising regularly and nocturnal eating habits, were associated with subjective sleep insufficiency in a group of Japanese workers.

Cerebral perfusion computed tomography deconvolution via structure tensor total variation regularization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeng, Dong; Zhang, Xinyu; Bian, Zhaoying, E-mail: zybian@smu.edu.cn, E-mail: jhma@smu.edu.cn

Purpose: Cerebral perfusion computed tomography (PCT) imaging as an accurate and fast acute ischemic stroke examination has been widely used in clinic. Meanwhile, a major drawback of PCT imaging is the high radiation dose due to its dynamic scan protocol. The purpose of this work is to develop a robust perfusion deconvolution approach via structure tensor total variation (STV) regularization (PD-STV) for estimating an accurate residue function in PCT imaging with the low-milliampere-seconds (low-mAs) data acquisition. Methods: Besides modeling the spatio-temporal structure information of PCT data, the STV regularization of the present PD-STV approach can utilize the higher order derivativesmore » of the residue function to enhance denoising performance. To minimize the objective function, the authors propose an effective iterative algorithm with a shrinkage/thresholding scheme. A simulation study on a digital brain perfusion phantom and a clinical study on an old infarction patient were conducted to validate and evaluate the performance of the present PD-STV approach. Results: In the digital phantom study, visual inspection and quantitative metrics (i.e., the normalized mean square error, the peak signal-to-noise ratio, and the universal quality index) assessments demonstrated that the PD-STV approach outperformed other existing approaches in terms of the performance of noise-induced artifacts reduction and accurate perfusion hemodynamic maps (PHM) estimation. In the patient data study, the present PD-STV approach could yield accurate PHM estimation with several noticeable gains over other existing approaches in terms of visual inspection and correlation analysis. Conclusions: This study demonstrated the feasibility and efficacy of the present PD-STV approach in utilizing STV regularization to improve the accuracy of residue function estimation of cerebral PCT imaging in the case of low-mAs.« less

School Nurse Inspections Improve Handwashing Supplies

PubMed Central

Ramos, Mary M.; Schrader, Ronald; Trujillo, Rebecca; Blea, Mary; Greenberg, Cynthia

2013-01-01

BACKGROUND Handwashing in the school setting is important for infectious disease control, yet maintaining adequate handwashing supplies is often made difficult by lack of funds, limited staff time, and student vandalism. This study measured the availability of handwashing supplies for students in New Mexico public schools and determined the impact of scheduled school nurse inspections on the availability of handwashing supplies. METHODS Participating school districts in New Mexico were matched by size and randomized into intervention and control groups. Baseline inspections were conducted in November 2008 followed by 2 subsequent bimonthly inspections. For each student bathroom, the presence or absence of soap and either paper towels or hand dryers was indicated on an inspection checklist. The intervention group reported findings to the New Mexico Department of Health (NMDOH) and to school administrative and custodial staff requesting that any identified problems be addressed. The control group reported inspection findings to the NMDOH only. Descriptive analyses were conducted to determine the proportion of bathrooms with soap and either paper towels or hand dryers. Comparisons were made between the intervention schools and the control schools at baseline and during the intervention period. RESULTS The intervention group had significantly higher probability of bathrooms being supplied with soap (p < .05) and paper towels/hand dryers (p < .02) during the intervention period. CONCLUSIONS Regularly scheduled school nurse inspections of hand hygiene supplies, with reporting to appropriate school officials, can improve the availability of handwashing supplies for students. PMID:21592131

A Purpose-Driven Fourth Year of Medical School.

PubMed

Dewan, Mantosh; Norcini, John

2017-10-03

The fourth year of medical school has been repeatedly found to be ineffective, and concerns exist about its purpose and academic quality, as well as grade inflation. Since Flexner, the purpose of undergraduate medical training has moved from readiness for independent practice to readiness for postgraduate training. However, training directors report that medical graduates are inadequately prepared to enter residency. The authors propose a fourth year with two components: first, a yearlong, longitudinal ambulatory experience of at least three days each week on an interprofessional team with consistent faculty supervision and mentoring, increasing independence, and a focus on education; and second, rigorous clinical-scales-based assessment of meaningful outcomes.In the proposed model, the medical student has generous time with a limited panel of patients, and increasing autonomy, with faculty moving from supervising physicians to collaborating physicians. There is regular assessment and formative feedback. This more independent, longitudinal clinical experience uniquely allows assessment of the most meaningful work-based performance outcomes-that is, patient outcomes assessed by validated clinical scales. The proposed fourth year will require a realignment of resources and faculty time; however, models already exist. Barriers and possible solutions are discussed.A purpose-driven, assessment-rich fourth year with patient and supervisor continuity will provide real-world experience, making medical graduates more competent and confident on the first day of residency. Use of clinical scales will also allow educators new confidence that the performance-based competence of these more experienced and expert graduates leads to demonstrable collaboration, healing, and good patient outcomes.

CD control with defect inspection: you can teach an old dog a new trick

NASA Astrophysics Data System (ADS)

Utzny, Clemens; Ullrich, Albrecht; Heumann, Jan; Mohn, Elias; Meusemann, Stefan; Seltmann, Rolf

2012-11-01

Achieving the required critical dimensions (CD) with the best possible uniformity (CDU) on photo-masks has always played a pivotal role in enabling chip technology. Current control strategies are based on scanning electron microscopy (SEM) based measurements implying a sparse spatial resolution on the order of ~ 10-2 m to 10-1 m. A higher spatial resolution could be reached with an adequate measurement sampling, however the increase in the number of measurements makes this approach in the context of a productive environment unfeasible. With the advent of more powerful defect inspection tools a significantly higher spatial resolution of 10-4 m can be achieved by measuring also CD during the regular defect inspection. This method is not limited to the measurement of specific measurement features thus paving the way to a CD assessment of all electrically relevant mask patterns. Enabling such a CD measurement gives way to new realms of CD control. Deterministic short range CD effects which were previously interpreted as noise can be resolved and addressed by CD compensation methods. This in can lead to substantial improvements of the CD uniformity. Thus the defect inspection mediated CD control closes a substantial gap in the mask manufacturing process by allowing the control of short range CD effects which were up till now beyond the reach of regular CD SEM based control strategies. This increase in spatial resolution also counters the decrease in measurement precision due to the usage of an optical system. In this paper we present detailed results on a) the CD data generated during the inspection process, b) the analytical tools needed for relating this data to CD SEM measurement and c) how the CD inspection process enables new dimension of CD compensation within the mask manufacturing process. We find that the inspection based CD measurement generates typically around 500000 measurements with a homogeneous covering of the active mask area. In comparing the CD inspection results with CD SEM measurement on a single measurement point base we find that optical limitations of the inspection tool play a substantial role within the photon based inspection process. Once these shift are characterized and removed a correlation coefficient of 0.9 between these two CD measurement techniques is found. This finding agrees well with a signature based matching approach. Based on these findings we set up a dedicated pooling algorithm which performs on outlier removal for all CD inspections together with a data clustering according to feature specific tool induced shifts. This way tool induced shift effects can be removed and CD signature computation is enabled. A statistical model of the CD signatures which relates the mask design parameters on the relevant length scales to CD effects thus enabling the computation CD compensation maps. The compensation maps address the CD effects on various distinct length scales and we show that long and short range contributions to the CD variation are decreased. We find that the CD uniformity is improved by 25% using this novel CD compensation strategy.

Characterization and optimization of spiral eddy current coils for in-situ crack detection

NASA Astrophysics Data System (ADS)

Mandache, Catalin

2018-03-01

In-situ condition-based maintenance is making strides in the aerospace industry and it is seen as an alternative to scheduled, time-based maintenance. With fatigue cracks originating from fastener holes as the main reason for structural failures, embedded eddy current coils are a viable non-invasive solution for their timely detection. The development and potential broad use of these coils are motivated by a few consistent arguments: (i) inspection of structures of complicated geometries and hard to access areas, that often require disassembly, (ii) alternative to regular inspection actions that could introduce inadvertent damage, (iii) for structures that have short inspection intervals, and (iv) for repaired structures where fastener holes contain bushings and prevent further bolt-hole inspections. Since the spiral coils are aiming at detecting radial cracks emanating from the fastener holes, their design parameters should allow for high inductance, low ohmic losses and power requirements, as well as optimal size and high sensitivity to discontinuities. In this study, flexible, surface conformable, spiral eddy current coils are empirically investigated on mock-up specimens, while numerical analysis is performed for their optimization and design improvement.

ELECTRODYNAMIC CORRECTIONS TO MAGNETIC MOMENT OF ELECTRON

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ulehla, I.

1960-01-01

Values obtained for fourth-order corrections to the magnetic moment of the electron were compared and recalculated. The regularizsion for small momenta was modified so that each diverging integral was regularized by expanding the denominator by an infinitely small part. The value obtained for the magnetic moment, mu = mu /sub o/ (1 + alpha /2 pi - 0.328 alpha /sup 2// pi /sup 2/, agreed with that of Petermann. (M.C.G.)

The fourth outburst during the present active stage of symbiotic binary AG Dra

NASA Astrophysics Data System (ADS)

Galis, R.; Merc, J.; Vrastak, M.; Teyssier, F.; Lester, T.; Boyd, D.; Sims, W.; Leedjarv, L.

2018-04-01

The symbiotic system AG Dra regularly undergoes quiescent and active stages which consist of several outbursts repeating at about 360d interval (Galis et al. 2017, OEJV 180, 24). After seven years of flat quiescence following the 2006-08 major outbursts, in the late spring of 2015, AG Dra began rising again in brightness toward what appeared to be a new minor outburst (ATel #7582).

48 CFR 52.222-53 - Exemption from Application of the Service Contract Act to Contracts for Certain Services...

Code of Federal Regulations, 2010 CFR

2010-10-01

... offered and sold regularly to non-Governmental customers, and are provided by the Contractor to the... inspection by customers, and states prices at which sales currently, or were last, made to a significant... these employees and for equivalent employees servicing commercial customers. (e)(1) Except for services...

77 FR 61027 - Notice of Lodging of Proposed Consent Decree Under the Clean Water Act and Safe Drinking Water Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-05

... Decree resolves alleged violations of the Clean Water Act and Safe Drinking Water Act at mobile home... provide drinking water at a number of its mobile home parks and illegally discharged sewage, failed to... environmental audits at each mobile home park, implementing corrective measures, conducting regular inspections...

38 CFR 1.553 - Public reading rooms and discretionary disclosures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... electronically at its FOIA home page on the Internet, which contains the records that the FOIA requires to be regularly made available for public inspection and copying. See § 1.552(a) for the pertinent Internet... home page on the Internet. See § 1.552(a) for the pertinent Internet address. If the requester does not...

38 CFR 1.553 - Public reading rooms and discretionary disclosures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... electronically at its FOIA home page on the Internet, which contains the records that the FOIA requires to be regularly made available for public inspection and copying. See § 1.552(a) for the pertinent Internet... home page on the Internet. See § 1.552(a) for the pertinent Internet address. If the requester does not...

38 CFR 1.553 - Public reading rooms and discretionary disclosures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... electronically at its FOIA home page on the Internet, which contains the records that the FOIA requires to be regularly made available for public inspection and copying. See § 1.552(a) for the pertinent Internet... home page on the Internet. See § 1.552(a) for the pertinent Internet address. If the requester does not...

49 CFR Appendix A to Part 237 - Supplemental Statement of Agency Policy on the Safety of Railroad Bridges

Code of Federal Regulations, 2012 CFR

2012-10-01

... conduct regular evaluations of railroad bridge inspection and management practices. The objective of these... condition, and the stresses imposed in those members by the service loads. (c) The factors which were used... provided: (i) The condition of the bridge has not changed significantly; and (ii) The stresses resulting...

National Efforts to Bring Reform to Scale in High-Poverty Schools: Outcomes and Implications

ERIC Educational Resources Information Center

Borman, Geoffrey D.

2005-01-01

Education in the United States is a decentralized system composed of highly variable practices, programs, and school contexts. The primary technology of education, teaching, is highly complex and is typically designed and implemented by teachers who have traditionally enjoyed a great deal of autonomy and independence from regular inspection. The…

76 FR 27367 - Slings; Extension of the Office of Management and Budget's (OMB) Approval of Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-11

... handling. Paragraph (e) of the Standard covers alloy steel chain slings. Paragraph (e)(1) requires that alloy steel chain slings have permanently affixed and durable identification stating the size, grade... thorough periodic inspection of alloy steel chain slings in use on a regular basis, but at least once a...

22 CFR 303.6 - Procedures for use of public reading room.

Code of Federal Regulations, 2010 CFR

2010-04-01

... copy records described in § 303.5(b) in the public reading room during regular business hours. Because... wishes to inspect or copy records shall arrange a time in advance, by telephone or letter request made to... written request would be advisable to aid in the identification and expeditious processing or the records...

9 CFR 97.1 - Overtime work at laboratories, border ports, ocean ports, and airports. 1

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Overtime work at laboratories, border... POULTRY) AND ANIMAL PRODUCTS OVERTIME SERVICES RELATING TO IMPORTS AND EXPORTS § 97.1 Overtime work at... inspection as a consequence of the operation of the aircraft, for work performed outside of the regularly...

First regulatory inspections measuring adherence to Good Pharmacy Practices in the public sector in Uganda: a cross-sectional comparison of performance between supervised and unsupervised facilities.

PubMed

Trap, Birna; Kikule, Kate; Vialle-Valentin, Catherine; Musoke, Richard; Lajul, Grace Otto; Hoppenworth, Kim; Konradsen, Dorthe

2016-01-01

Since its inception, the Uganda National Drug Authority (NDA) has regularly inspected private sector pharmacies to monitor adherence to Good Pharmacy Practices (GPP). This study reports findings from the first public facility inspections following an intervention (SPARS: Supervision, Performance Assessment, and Recognition Strategy) to build GPP and medicines management capacity in the public sector. The study includes 455 public facilities: 417 facilities were inspected after at least four SPARS visits by trained managerial district staff (SPARS group), 38 before any exposure to SPARS. NDA inspectors measured 10 critical, 20 major, and 37 minor GPP indicators in every facility and only accredited facilities that passed all 10 critical and failed no more than 7 major indicators. Lack of compliance for a given indicator was defined as less than 75 % facilities passing that indicator. We assessed factors associated with certification using logistic regression analysis and compared number of failed indicators between the SPARS and comparative groups using two sample t-tests with equal or unequal variance. 57.4 % of inspected facilities obtained GPP certification: 57.1 % in the SPARS and 60.5 % in the comparative group (Adj. OR = 0.91, 95 % CI 0.45-1.85, p = 0.802). Overall, facilities failed an average of 10 indicators. SPARS facilities performed better than comparative facilities (9 (SD 6.1) vs. 13 (SD 7.7) failed indicators respectively; p = 0.017), and SPARS supported facilities scored better on indicators covered by SPARS. For all indicators but one minor, performance in the SPARS group was equal to or significantly better than in unsupervised facilities. Within the SPARS (intervention) group, certified facilities had < 75 % compliance on 7 indicators (all minor), and uncertified facilities on 19 (4 critical, 2 major, and 13 minor) indicators. Half of the Ugandan population obtains medicines from the public sector. Yet, we found only 3/5 of inspected public health facilities meet GPP standards. SPARS facilities tended to perform better than unsupervised facilities, substantiating the value of supporting supervision interventions in GPP areas that need strengthening. None compliant indicators can be improved through practices and behavioral changes; some require infrastructure investments. We conclude that regular NDA inspections of public sector pharmacies in conjunction with interventions to improve GPP adherence can revolutionize patient care in Uganda.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Quarterly Environmental Data Summary (QEDS) for the fourth quarter of 1997 is prepared in support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement. The data presented constitute the QEDS. The data were received from the contract laboratories, verified by the Weldon Spring Site verification group and, except for air monitoring data and site KPA generated data (uranium analyses), merged into the data base during the fourth quarter of 1997. Air monitoring data presented are the most recent complete sets of quarterly data. Air data are not stored in the data base and KPA data are notmore » merged into the regular data base. Significant data, defined as data values that have exceeded defined ``above normal`` level 2 values, are discussed in this letter for Environmental Monitoring Plan (EMP) generated data only. Above normal level 2 values are based, in ES and H procedures, on historical high values, DOE Derived Concentration Guides (DCGs), NPDES limits and other guidelines. The procedures also establish actions to be taken in response to such data. Data received and verified during the fourth quarter were within a permissible range of variability except for those which are detailed.« less

A resident conference for systems-based practice and practice-based learning.

PubMed

Sultana, Carmen J; Baxter, Jason K

2011-02-01

Improving patient safety and quality of care is part of systems-based practice and practice-based learning for residents. We expanded our obstetrics and gynecology department's regularly scheduled morbidity and mortality conferences to teach quality assurance concepts based on patient care on obstetrics and gynecology fourth-year resident rotations. Obstetrics and gynecology fourth-year residents on one of the two rotations each presented and analyzed a systems-based problem they encountered during patient care. They used an online learning module and proposed solutions, many of which were effectively implemented. Over 5 years, case presentations from 33 conferences were available with problems identified in emergency preparedness, coordination of care, scheduling and supervision, communication, medical practice, documentation, and lack of equipment or facilities. Twenty-two of the suggested solutions were partially or totally implemented. Barriers to implementation were identified. In conclusion, a conference presentation by fourth-year residents can identify patient safety problems, aid in their resolution, and suggest changes to patient care while teaching the principles of systems-based practice and practice-based learning.

Space reliability technology - A historical perspective

NASA Technical Reports Server (NTRS)

Cohen, H.

1984-01-01

The progressive improvements in reliability of launch vehicles is traced from the Vanguard rocket to the STS. The Vanguard, built with minimal redundancy and a high mass ratio, was used as an operational vehicle midway through its test program in an attempt to meet the perceived challenge represented by the Sputnik. The fourth Vanguard failed due to inadequate contamination prevention and lack of inspection ports. Automatic firing sequences were adopted for the Titan rockets, which were an order of magnitude larger than the Vanguard and therefore had room for interior inspections. Qualification testing and reporting were introduced for components, along with X ray inspection of fuel tank welds. Dual systems were added for flight critical components when the Titan became man-rated for the Gemini program. Designs incorporated full failure mode effects and criticality analyses for the Apollo program, which exposed the limits of applicability of numerical reliability models. Fault tree analyses and program milestone reviews were initiated. The worth of man-in-the-loop in space activities for reliability was demonstrated with the rescue of Skylab after solar panel and meteoroid shield failures. It is now the reliability of the payload, rather than the vehicle, that is questioned for Shuttle launches.

Explaining the enforcement gap in China: local government support and internal agency obstacles as predictors of enforcement actions in Guangzhou.

PubMed

Lo, Carlos Wing-Hung; Fryxell, Gerald E; van Rooij, Benjamin; Wang, Wei; Honying Li, Pansy

2012-11-30

This study investigates how local government support for enforcement and internal agency obstacles explain the enforcement gap in Guangzhou, China. It was found that agency obstacles associated with insufficient resources and job ambiguity, in particular, affect enforcement officials' perceptions of enforcement difficulty. Somewhat more surprisingly, however, local government support was not found to be a significant predictor of these perceptions. In addition, this study identified four significant relationships associated with specific enforcement actions. First and second, perceptions of enforcement difficulty appear to lead to fewer inspections, but also have a weak positive effect on the frequency of fines levied. Third, poor coordination within the bureau was found to be associated with fewer violations being processed. Fourth, and contrary to expectations, local government support was found to suppress the frequency of inspections while having no significant effect on violations or fines. Overall, these findings suggest that increased local government support for the enforcement of environmental regulation in China may not necessarily lead to more rigorous enforcement, at least if enforcement rigor is measured in terms of inspections, citations and fines. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of testing machine for tunnel inspection using multi-rotor UAV

NASA Astrophysics Data System (ADS)

Iwamoto, Tatsuya; Enaka, Tomoya; Tada, Keijirou

2017-05-01

Many concrete structures are deteriorating to dangerous levels throughout Japan. These concrete structures need to be inspected regularly to be sure that they are safe enough to be used. The inspection method for these concrete structures is typically the impact acoustic method. In the impact acoustic method, the worker taps the surface of the concrete with a hammer. Thus, it is necessary to set up scaffolding to access tunnel walls for inspection. Alternatively, aerial work platforms can be used. However, setting up scaffolding and aerial work platforms is not economical with regard to time or money. Therefore, we developed a testing machine using a multirotor UAV for tunnel inspection. This test machine flies by a plurality of rotors, and it is pushed along a concrete wall and moved by using rubber crawlers. The impact acoustic method is used in this testing machine. This testing machine has a hammer to make an impact, and a microphone to acquire the impact sound. The impact sound is converted into an electrical signal and is wirelessly transmitted to the computer. At the same time, the position of the testing machine is measured by image processing using a camera. The weight and dimensions of the testing machine are approximately 1.25 kg and 500 mm by 500 mm by 250 mm, respectively.

Effects of inspections in small world social networks with different contagion rules

NASA Astrophysics Data System (ADS)

Muñoz, Francisco; Nuño, Juan Carlos; Primicerio, Mario

2015-08-01

We study the way the structure of social links determines the effects of random inspections on a population formed by two types of individuals, e.g. tax-payers and tax-evaders (free riders). It is assumed that inspections occur in a larger scale than the population relaxation time and, therefore, a unique initial inspection is performed on a population that is completely formed by tax-evaders. Besides, the inspected tax-evaders become tax-payers forever. The social network is modeled as a Watts-Strogatz Small World whose topology can be tuned in terms of a parameter p ∈ [ 0 , 1 ] from regular (p = 0) to random (p = 1). Two local contagion rules are considered: (i) a continuous one that takes the proportion of neighbors to determine the next status of an individual (node) and (ii) a discontinuous (threshold rule) that assumes a minimum number of neighbors to modify the current state. In the former case, irrespective of the inspection intensity ν, the equilibrium population is always formed by tax-payers. In the mean field approach, we obtain the characteristic time of convergence as a function of ν and p. For the threshold contagion rule, we show that the response of the population to the intensity of inspections ν is a function of the structure of the social network p and the willingness of the individuals to change their state, r. It is shown that sharp transitions occur at critical values of ν that depends on p and r. We discuss these results within the context of tax evasion and fraud where the strategies of inspection could be of major relevance.

Comparative testing of radiographic testing, ultrasonic testing and phased array advanced ultrasonic testing non destructive testing techniques in accordance with the AWS D1.5 bridge welding code : [summary].

DOT National Transportation Integrated Search

2014-02-01

To ensure that Florida bridges remain safe and structurally secure for their 50-year-plus service life, they are inspected regularly. For steel bridges, welds critical to the bridges integrity do not even leave the workshop unless they meet rigoro...

77 FR 24202 - Notice of Suspension and Commencement of Proposed Debarment Proceedings; Schools and Libraries...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-23

... . The text may also be purchased from the Commission's duplicating inspection and copying during regular... applicants.\\10\\ You also conspired to bribe school officials in exchange for their ceding control of the... at 2, 4 (E.D. La. filed June 2, 2011) (Factual Basis). \\10\\ Id. \\11\\ Id. at 3. These bribes included...

On a fourth order accurate implicit finite difference scheme for hyperbolic conservation laws. II - Five-point schemes

NASA Technical Reports Server (NTRS)

Harten, A.; Tal-Ezer, H.

1981-01-01

This paper presents a family of two-level five-point implicit schemes for the solution of one-dimensional systems of hyperbolic conservation laws, which generalized the Crank-Nicholson scheme to fourth order accuracy (4-4) in both time and space. These 4-4 schemes are nondissipative and unconditionally stable. Special attention is given to the system of linear equations associated with these 4-4 implicit schemes. The regularity of this system is analyzed and efficiency of solution-algorithms is examined. A two-datum representation of these 4-4 implicit schemes brings about a compactification of the stencil to three mesh points at each time-level. This compact two-datum representation is particularly useful in deriving boundary treatments. Numerical results are presented to illustrate some properties of the proposed scheme.

A microscopy approach for in situ inspection of micro-coordinate measurement machine styli for contamination

NASA Astrophysics Data System (ADS)

Feng, Xiaobing; Pascal, Jonathan; Lawes, Simon

2017-09-01

During the process of measurement using a micro-coordinate measurement machine (µCMM) contamination gradually builds up on the surface of the stylus tip and affects the dimensional accuracy of the measurement. Regular inspection of the stylus for contamination is essential to determine the appropriate cleaning interval and prevent the dimensional error from becoming significant. However, in situ inspection of a µCMM stylus is challenging due to the size, spherical shape, material and surface properties of a typical stylus. To address this challenge, this study evaluates several non-contact measurement technologies for in situ stylus inspection and, based on those findings, proposes a cost-effective microscopy approach. The operational principle is then demonstrated by an automated prototype, coordinated directly by the CMM software MCOSMOS, with an effective threshold of detection as low as 400 nm and a large field of view and depth of field. The level of contamination on the stylus has been found to increase steadily with the number of measurement contacts made. Once excessive contamination is detected on the stylus, measurement should be stopped and a stylus cleaning procedure should be performed to avoid affecting measurement accuracy.

Crowdsourcing Broad Absorption Line Properties and Other Features of Quasar Outflow Using Zooniverse Citizen Science Project Platform

NASA Astrophysics Data System (ADS)

Crowe, Cassie; Lundgren, Britt; Grier, Catherine

2018-01-01

The Sloan Digital Sky Survey (SDSS) regularly publishes vast catalogs of quasars and other astronomical objects. Previously, the SDSS collaboration has used visual inspection to check quasar redshift validity and flag instances of broad absorption lines (BALs). This information helps researchers to easily single out the quasars with BAL properties and study their outflows and other intervening gas clouds. Due to the ever-growing number of new SDSS quasar observations, visual inspections are no longer possible using previous methods. Currently, BAL information is being determined entirely computationally, and the accuracy of that information is not precisely known. This project uses the Zooniverse citizen science platform to visually inspect quasar spectra for BAL properties, to check the accuracy of the current autonomous methods, and to flag multi-phase outflows and find candidates for in-falling gas into the quasar central engine. The layout and format of a Zooniverse project provides an easier way to inspect and record data on each spectrum and share the workload via crowdsourcing. Work done by the SDSS collaboration members is serving as a beta test for a public project upon the official release of the DR14 quasar catalog by SDSS.

Development of an Automatic Testing Platform for Aviator's Night Vision Goggle Honeycomb Defect Inspection.

PubMed

Jian, Bo-Lin; Peng, Chao-Chung

2017-06-15

Due to the direct influence of night vision equipment availability on the safety of night-time aerial reconnaissance, maintenance needs to be carried out regularly. Unfortunately, some defects are not easy to observe or are not even detectable by human eyes. As a consequence, this study proposed a novel automatic defect detection system for aviator's night vision imaging systems AN/AVS-6(V)1 and AN/AVS-6(V)2. An auto-focusing process consisting of a sharpness calculation and a gradient-based variable step search method is applied to achieve an automatic detection system for honeycomb defects. This work also developed a test platform for sharpness measurement. It demonstrates that the honeycomb defects can be precisely recognized and the number of the defects can also be determined automatically during the inspection. Most importantly, the proposed approach significantly reduces the time consumption, as well as human assessment error during the night vision goggle inspection procedures.

Deep Learning and Image Processing for Automated Crack Detection and Defect Measurement in Underground Structures

NASA Astrophysics Data System (ADS)

Panella, F.; Boehm, J.; Loo, Y.; Kaushik, A.; Gonzalez, D.

2018-05-01

This work presents the combination of Deep-Learning (DL) and image processing to produce an automated cracks recognition and defect measurement tool for civil structures. The authors focus on tunnel civil structures and survey and have developed an end to end tool for asset management of underground structures. In order to maintain the serviceability of tunnels, regular inspection is needed to assess their structural status. The traditional method of carrying out the survey is the visual inspection: simple, but slow and relatively expensive and the quality of the output depends on the ability and experience of the engineer as well as on the total workload (stress and tiredness may influence the ability to observe and record information). As a result of these issues, in the last decade there is the desire to automate the monitoring using new methods of inspection. The present paper has the goal of combining DL with traditional image processing to create a tool able to detect, locate and measure the structural defect.

Optical coherence tomography for nondestructive evaluation of fuel rod degradation

NASA Astrophysics Data System (ADS)

Renshaw, Jeremy B.; Jenkins, Thomas P.; Buckner, Benjamin D.; Friend, Brian

2015-03-01

Nuclear power plants regularly inspect fuel rods to ensure safe and reliable operation. Excessive corrosion can cause fuel failures which can have significant repercussions for the plant, including impacts on plant operation, worker exposure to radiation, and the plant's INPO rating. While plants typically inspect for fuel rod corrosion using eddy current techniques, these techniques have known issues with reliability in the presence of tenacious, ferromagnetic crud layers that can deposit during operation, and the nondestructive evaluation (NDE) inspection results can often be in error by a factor of 2 or 3. For this reason, alternative measurement techniques, such as Optical Coherence Tomography (OCT), have been evaluated that are not sensitive to the ferromagnetic nature of the crud. This paper demonstrates that OCT has significant potential to characterize the thickness of crud layers that can deposit on the surfaces of fuel rods during operation. Physical trials have been performed on simulated crud samples, and the resulting data show an apparent correlation between the crud layer thickness and the OCT signal.

Scalar self-force on eccentric geodesics in Schwarzschild spacetime: A time-domain computation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haas, Roland

2007-06-15

We calculate the self-force acting on a particle with scalar charge moving on a generic geodesic around a Schwarzschild black hole. This calculation requires an accurate computation of the retarded scalar field produced by the moving charge; this is done numerically with the help of a fourth-order convergent finite-difference scheme formulated in the time domain. The calculation also requires a regularization procedure, because the retarded field is singular on the particle's world line; this is handled mode-by-mode via the mode-sum regularization scheme first introduced by Barack and Ori. This paper presents the numerical method, various numerical tests, and a samplemore » of results for mildly eccentric orbits as well as ''zoom-whirl'' orbits.« less

An outbreak of viral gastroenteritis on a cruise ship.

PubMed

McEvoy, M; Blake, W; Brown, D; Green, J; Cartwright, R

1996-12-06

Three hundred and seventy-eight passengers reported gastroenteritis during four cruises in the western Mediterranean on consecutive weeks of 1995. The rate at which cases were reported each day increased on the fourth cruise. The ship's owner commissioned an epidemiological investigation from the PHLS Communicable Disease Surveillance Centre. Cases reported explosive vomiting and diarrhoea, which lasted from 24 hours to five days, and were suggestive of viral gastroenteritis. No food handlers reported illness, but enquiries suggested that some had been ill and treated themselves. No bacterial pathogens were isolated from faecal specimens provided by cases or from water, food, and environmental samples taken from the galley. Small round structured viruses (SRSV) were identified by reverse transcriptase polymerase chain reaction in two faecal specimens and one specimen of vomit from people who became ill during the fourth cruise. SRSV was also identified in one faecal specimen by electron microscopy. Environmental inspection revealed inappropriate food handling, hygiene, and storage. During one 24 hour period no chlorine was detectable in the water. A case control study conducted on the fourth cruise sought details of exposure to various foodstuffs, unbottled water, and various parts of the ship. No significant associations were found between illness and any exposures. The evidence strongly suggested a continuing outbreak of SRSV infection transmitted from person to person. Some passengers remained on board for a second week and could have transmitted their infection to new arrivals. The ship was cleared and disinfected at the end of the fourth cruise in order to interrupt transmission. Fewer than 10 cases presented in each of the fifth and sixth cruises.

Estimation of Nationwide Vaccination Coverage and Comparison of Interview and Telephone Survey Methodology for Estimating Vaccination Status

PubMed Central

Park, Boyoung; Lee, Yeon-Kyeng; Cho, Lisa Y.; Go, Un Yeong; Yang, Jae Jeong; Ma, Seung Hyun; Choi, Bo-Youl; Lee, Moo-Sik; Lee, Jin-Seok; Choi, Eun Hwa; Lee, Hoan Jong

2011-01-01

This study compared interview and telephone surveys to select the better method for regularly estimating nationwide vaccination coverage rates in Korea. Interview surveys using multi-stage cluster sampling and telephone surveys using stratified random sampling were conducted. Nationwide coverage rates were estimated in subjects with vaccination cards in the interview survey. The interview survey relative to the telephone survey showed a higher response rate, lower missing rate, higher validity and a less difference in vaccination coverage rates between card owners and non-owners. Primary vaccination coverage rate was greater than 90% except for the fourth dose of DTaP (diphtheria/tetanus/pertussis), the third dose of polio, and the third dose of Japanese B encephalitis (JBE). The DTaP4: Polio3: MMR1 fully vaccination rate was 62.0% and BCG1:HepB3:DTaP4:Polio3:MMR1 was 59.5%. For age-appropriate vaccination, the coverage rate was 50%-80%. We concluded that the interview survey was better than the telephone survey. These results can be applied to countries with incomplete registry and decreasing rates of landline telephone coverage due to increased cell phone usage and countries. Among mandatory vaccines, efforts to increase vaccination rate for the fourth dose of DTaP, the third dose of polio, JBE and regular vaccinations at recommended periods should be conducted in Korea. PMID:21655054

Damage detection in hazardous waste storage tank bottoms using ultrasonic guided waves

NASA Astrophysics Data System (ADS)

Cobb, Adam C.; Fisher, Jay L.; Bartlett, Jonathan D.; Earnest, Douglas R.

2018-04-01

Detecting damage in storage tanks is performed commercially using a variety of techniques. The most commonly used inspection technologies are magnetic flux leakage (MFL), conventional ultrasonic testing (UT), and leak testing. MFL and UT typically involve manual or robotic scanning of a sensor along the metal surfaces to detect cracks or corrosion wall loss. For inspection of the tank bottom, however, the storage tank is commonly emptied to allow interior access for the inspection system. While there are costs associated with emptying a storage tank for inspection that can be justified in some scenarios, there are situations where emptying the tank is impractical. Robotic, submersible systems have been developed for inspecting these tanks, but there are some storage tanks whose contents are so hazardous that even the use of these systems is untenable. Thus, there is a need to develop an inspection strategy that does not require emptying the tank or insertion of the sensor system into the tank. This paper presents a guided wave system for inspecting the bottom of double-shelled storage tanks (DSTs), with the sensor located on the exterior side-wall of the vessel. The sensor used is an electromagnetic acoustic transducer (EMAT) that generates and receives shear-horizontal guided plate waves using magnetostriction principles. The system operates by scanning the sensor around the circumference of the storage tank and sending guided waves into the tank bottom at regular intervals. The data from multiple locations are combined using the synthetic aperture focusing technique (SAFT) to create a color-mapped image of the vessel thickness changes. The target application of the system described is inspection of DSTs located at the Hanford site, which are million-gallon vessels used to store nuclear waste. Other vessels whose exterior walls are accessible would also be candidates for inspection using the described approach. Experimental results are shown from tests on multiple mockups of the DSTs being used to develop the sensor system.

The influence of diet consistence, drinking water and bedding on periodontal disease in Sprague-Dawley rats.

PubMed

Björnsson, Magnús Jón; Velschow, Sten; Stoltze, Kaj; Havemose-Poulsen, Anne; Schou, Søren; Holmstrup, Palle

2003-12-01

Although rats have been extensively used in periodontal research, pre-experimental periodontal inspection has not been given high priority in previous studies of experimental periodontal disease in rats. An inspection of 50 Sprague-Dawley rats, which were to be used in a model of experimental periodontal disease, revealed signs of periodontal disease in a considerable proportion of the animals. The objectives of the present study were to describe disease progression, identify factors responsible for induction of periodontal disease and test a method for breeding of healthy rats. A longitudinal study revealed that 33% of rats, bred under the same conditions, showed signs of periodontal disease during, or shortly after, eruption of the molars. Regular diet caused significantly more horizontal bone loss (P = 0.0001) and significantly less periodontal bone support (P < 0.0001) than the same kind of diet with a smaller grain size. Wood chip bedding in the rats' cages significantly reduced periodontal bone support (P < 0.0001) compared to a wire mesh floor and a simultaneous use of regular diet and bedding decreased it even further (P = 0.0023). Finally, by using finely milled diet, a wire mesh floor and tap water, instead of conventional breeding methods of regular diet, bedding and acidic water, it was possible to breed rats with minimal signs of periodontal disease. The results of the present study emphasize the need for pre- experimental examination of rats. They also show that diet and bedding conditions have the potential of seriously influencing outcomes of studies of periodontal disease in rats.

Thermal inactivation of infested plants, nursery equipment, and soil is a management option for the treatment of Phytophthora ramorum, causal agent of sudden oak death

Treesearch

Wolfgang Schweigkofler; Vernon Huffman; Karen Suslow; Kathleen Kosta

2017-01-01

Infected nursery plants play an important role in the spread of Phytophthora ramorum , the causal agent of sudden oak death and ramorum blight. In order to minimize the risk for disease transmission to new areas, nurseries are inspected regularly for P. ramorum , and federal regulations require the eradication of...

3-D zebrafish embryo image filtering by nonlinear partial differential equations.

PubMed

Rizzi, Barbara; Campana, Matteo; Zanella, Cecilia; Melani, Camilo; Cunderlik, Robert; Krivá, Zuzana; Bourgine, Paul; Mikula, Karol; Peyriéras, Nadine; Sarti, Alessandro

2007-01-01

We discuss application of nonlinear PDE based methods to filtering of 3-D confocal images of embryogenesis. We focus on the mean curvature driven and the regularized Perona-Malik equations, where standard as well as newly suggested edge detectors are used. After presenting the related mathematical models, the practical results are given and discussed by visual inspection and quantitatively using the mean Hausdorff distance.

Maggots in the Brain: Sequelae of Ignored Scalp Wound.

PubMed

Aggarwal, Ashish; Maskara, Prasant

2018-01-01

A 26-year-old male had suffered a burn injury to his scalp in childhood and ignored it. He presented with a complaint of something crawling on his head. Inspection of his scalp revealed multiple maggots on the brain surface with erosion of overlying bone and scalp. He was successfully managed by surgical debridement and regular dressing. Copyright © 2017 Elsevier Inc. All rights reserved.

Teachers' Training and Involvement in School Health Programme in Oyo State, Southwest Nigeria.

PubMed

Adebayo, A M; Makinde, G I; Omode, P K

2018-02-01

School Health Programme (SHP) currently lacks effective implementation in Nigeria. Lack of training/orientation of teachers in the programme may have contributed to this. Developing an appropriate training intervention may require prior situation analysis to know teachers' current level of training and involvement in the programme, as there is paucity of information on such study in Oyo State. Thus, this study was carried out to assess primary school teachers' training and involvement in the SHP in Oyo state, Nigeria. A descriptive cross-sectional study was conducted using a 2-stage cluster sampling method to select 2 out of the 33 Local Government Areas (LGAs) in Oyo State. A semi-structured self-administered questionnaire was used to obtain information on respondents' characteristics and previous training and involvement in the SHP. The major variable for assessing teachers' involvement in the SHP was "ever been involved in health inspection of pupils". Level of involvement was categorized into "never, "once", "occasionally", "frequently", and "very regularly". These options were further re-categorized into "never", "infrequently" (once and occasionally) and "frequently" (frequently and very regularly) for the purpose of inferential statistics. Data were analyzed using descriptive statistics and Chi-square test at p=0.05. A total of 811 respondents participated in the study. Twenty-eight percent of the respondents reported previous training in the SHP out of whom 44.7% received the training on-the-job. Forty-seven percent were regularly involved in health inspection of pupils. Teachers who taught health education (92.3%) were involved in health inspection of pupils compared with counterparts who did not (74.4%) (p<0.001). Similarly, 85.3% of teachers trained on-the-job were frequently involved in the SHP compared with 73.6% of those trained during undergraduate years (p=0.026). Training and involvement of public primary school teachers in the SHP in Oyo State were suboptimal. Efforts at building the capacity of teachers through on-the-job training in SHP may be necessary to improving the current level of implementation in the State.

Applicability of ion mobility spectrometry for detection of quarantine pests in wood

NASA Astrophysics Data System (ADS)

Ewing, K. J.; Sanghera, J.; Myers, S. W.; Ervin, A. M.; Carey, C.; Gleason, G.; Mosser, L.; Levy, L.; Hennessey, M. K.; Bulluck, R.

2016-05-01

Visual inspection is the most commonly used method for detecting quarantine pests in agricultural cargo items at ports. For example, solid wood packing material (SWPM) at ports may be a pathway for wood pests and is a frequent item of inspection at ports. The inspection process includes examination of the external surface of the item and often destructive sampling to detect internal pest targets. There are few tools available to inspectors to increase the efficiency of inspection and reduce the labor involved. Ion mobility spectrometry (IMS) has promise as an aid for inspection. Because pests emit volatile organic compounds (VOCs) such as hormone like substances, Ion Mobility Spectrometry (IMS) was investigated for possible utility for detecting pests during inspection. SWPM is a major pest pathway in trade, and fumigation of many kinds of wood, including SWPM, with methyl bromide (MeBr) following a published schedule1 is regularly conducted for phytosanitary reasons prior to shipment to the United States. However, the question remains as to how long the methyl bromide remains in the wood samples after fumigation such that it could act as an interferent to the detection of pest related VOC emissions. This work investigates the capability of ion mobility spectrometry to detect the presence of residual methyl bromide in fumigated maple and poplar wood samples at different times post fumigation up to 118 days after fumigation. Data show that MeBr can be detected in the less dense poplar wood up to 118 days after fumigation while MeBr can be detected in the denser maple wood 55 days after fumigation.

Evaluation Model for Pavement Surface Distress on 3d Point Clouds from Mobile Mapping System

NASA Astrophysics Data System (ADS)

Aoki, K.; Yamamoto, K.; Shimamura, H.

2012-07-01

This paper proposes a methodology to evaluate the pavement surface distress for maintenance planning of road pavement using 3D point clouds from Mobile Mapping System (MMS). The issue on maintenance planning of road pavement requires scheduled rehabilitation activities for damaged pavement sections to keep high level of services. The importance of this performance-based infrastructure asset management on actual inspection data is globally recognized. Inspection methodology of road pavement surface, a semi-automatic measurement system utilizing inspection vehicles for measuring surface deterioration indexes, such as cracking, rutting and IRI, have already been introduced and capable of continuously archiving the pavement performance data. However, any scheduled inspection using automatic measurement vehicle needs much cost according to the instruments' specification or inspection interval. Therefore, implementation of road maintenance work, especially for the local government, is difficult considering costeffectiveness. Based on this background, in this research, the methodologies for a simplified evaluation for pavement surface and assessment of damaged pavement section are proposed using 3D point clouds data to build urban 3D modelling. The simplified evaluation results of road surface were able to provide useful information for road administrator to find out the pavement section for a detailed examination and for an immediate repair work. In particular, the regularity of enumeration of 3D point clouds was evaluated using Chow-test and F-test model by extracting the section where the structural change of a coordinate value was remarkably achieved. Finally, the validity of the current methodology was investigated by conducting a case study dealing with the actual inspection data of the local roads.

Health Care Indicators: Hospital, Employment, and Price Indicators for the Health Care Industry: Fourth Quarter 1995 and Annual Data for 1987-95

PubMed Central

Heffler, Stephen K.; Donham, Carolyn S.; Won, Darleen K.; Sensenig, Arthur L.

1996-01-01

This regular feature of the journal includes a discussion of recent trends in health care spending, employment, and prices. The statistics presented in this article are valuable in their own right and for understanding the relationship between the health care sector and the overall economy. In addition, they allow us to anticipate the direction and magnitude of health care cost changes prior to the availability of more comprehensive data. PMID:10165709

The Prussian German General Staff System and Its Impact on the General and Admiral Staff Officers of the Federal Armed Forces of Today

DTIC Science & Technology

1991-03-15

General-and six ministerial divisions-- the Budget Division, the Personnel Management Division, the Quartering, Real Estate and Construction Division and... Management Division, 39,242 officers served in the Bundeswehr during the first half of the eighties: 26,102 regular line officers (Truppenoffiziere), 1,615...additionally attend a 6 months language course 17 Camand and leadeship doctrine, seaity policy and a=ed forces ard social sciences. in a fourth area, single

Duration of stimulus presentation and screening for perceptual disabilities.

PubMed

Rohr, M E; Ayers, J B

1975-02-01

This study examined the effects of increasing the stimulus-presentation time of a motion picture test for identifying perceptual disabilities in the performance of Ss in regular first and fourth grade classrooms and on a sample of Ss in special education classes who had been identified as having varying degrees of perceptual deficiencies. The length of stimulus presentation increased the total performance of Ss on the motion picture test but did not add to the value of the instrument as a screening device.

Army Hearing Program Status Report Quarter 3 Fiscal Year 2017

DTIC Science & Technology

2017-09-14

chapter. This provides a vehicle for the collection of Measures of Performance and Measures of Effectiveness (MOE) in order to report the metrics as...Program representatives and managers to visit and inspect these areas regularly for noise exposure and proper protective measures . As evidenced by the...welcome measure to report. RECOMMENDATIONS • Increase participation in the survey as directed by Chief of Staff, U.S. Army Medical Command (MEDCOM

A mixed-order nonlinear diffusion compressed sensing MR image reconstruction.

PubMed

Joy, Ajin; Paul, Joseph Suresh

2018-03-07

Avoid formation of staircase artifacts in nonlinear diffusion-based MR image reconstruction without compromising computational speed. Whereas second-order diffusion encourages the evolution of pixel neighborhood with uniform intensities, fourth-order diffusion considers smooth region to be not necessarily a uniform intensity region but also a planar region. Therefore, a controlled application of fourth-order diffusivity function is used to encourage second-order diffusion to reconstruct the smooth regions of the image as a plane rather than a group of blocks, while not being strong enough to introduce the undesirable speckle effect. Proposed method is compared with second- and fourth-order nonlinear diffusion reconstruction, total variation (TV), total generalized variation, and higher degree TV using in vivo data sets for different undersampling levels with application to dictionary learning-based reconstruction. It is observed that the proposed technique preserves sharp boundaries in the image while preventing the formation of staircase artifacts in the regions of smoothly varying pixel intensities. It also shows reduced error measures compared with second-order nonlinear diffusion reconstruction or TV and converges faster than TV-based methods. Because nonlinear diffusion is known to be an effective alternative to TV for edge-preserving reconstruction, the crucial aspect of staircase artifact removal is addressed. Reconstruction is found to be stable for the experimentally determined range of fourth-order regularization parameter, and therefore not does not introduce a parameter search. Hence, the computational simplicity of second-order diffusion is retained. © 2018 International Society for Magnetic Resonance in Medicine.

KSC-05pd2530

NASA Image and Video Library

2005-11-30

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, the nose cap of space shuttle Endeavour is prepared for installation of thermal protection system blankets. Endeavour recently came out of a nearly two-year Orbiter Major Modification period which began in December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return-to-flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout the orbiter. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology, and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997.

Comparison of higher-order multiphoton signal generation and collection at the 1700-nm window based on transmittance measurement of objective lenses.

PubMed

Wen, Wenhui; Wang, Yuxin; Liu, Hongji; Wang, Kai; Qiu, Ping; Wang, Ke

2018-01-01

One benefit of excitation at the 1700-nm window is the more accessible modalities of multiphoton signal generation. It is demonstrated here that the transmittance performance of the objective lens is of vital importance for efficient higher-order multiphoton signal generation and collection excited at the 1700-nm window. Two commonly used objective lenses for multiphoton microscopy (MPM) are characterized and compared, one with regular coating and the other with customized coating for high transmittance at the 1700-nm window. Our results show that, fourth harmonic generation imaging of mouse tail tendon and 5-photon fluorescence of carbon quantum dots using the regular objective lens shows an order of magnitude signal higher than those using the customized objective lens. Besides, the regular objective lens also enables a 3-photon fluorescence imaging depth of >1600 μm in mouse brain in vivo. Our results will provide guidelines for objective lens selection for MPM at the 1700-nm window. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

[Physical activity: results of the German Health Interview and Examination Survey for Adults (DEGS1)].

PubMed

Krug, S; Jordan, S; Mensink, G B M; Müters, S; Finger, J; Lampert, T

2013-05-01

Regular physical activity can have a positive effect on health at any age. Today's lifestyles, however, can often be characterised as sedentary. Therefore, the promotion of physical activity and sports has become an integral part of public health measures. The representative data of adults aged 18 to 79 years in Germany obtained from the "German Health Interview and Examination Survey for Adults" (DEGS1) provide an overview of self-estimated current physical activity behaviour. The results show that one third of the adult population claims to pay close attention to reaching a sufficient level of physical activity and one fourth participates in sports for at least 2 h/week on a regular basis. Thus, the percentage of adults regularly engaged in sports has increased compared to the previous "German National Health Interview and Examination Survey 1998". Still, four out of five adults do not achieve at least 2.5 h/week of moderate-intensity physical activity as recommended by the World Health Organisation. Consequently, future individual-level and population-level interventions should focus on target group-specific measures while continuing to promote regular physical activity in all segments of the population. An English full-text version of this article is available at SpringerLink as supplemental.

Preconditioned steepest descent methods for some nonlinear elliptic equations involving p-Laplacian terms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Wenqiang, E-mail: wfeng1@vols.utk.edu; Salgado, Abner J., E-mail: asalgad1@utk.edu; Wang, Cheng, E-mail: cwang1@umassd.edu

We describe and analyze preconditioned steepest descent (PSD) solvers for fourth and sixth-order nonlinear elliptic equations that include p-Laplacian terms on periodic domains in 2 and 3 dimensions. The highest and lowest order terms of the equations are constant-coefficient, positive linear operators, which suggests a natural preconditioning strategy. Such nonlinear elliptic equations often arise from time discretization of parabolic equations that model various biological and physical phenomena, in particular, liquid crystals, thin film epitaxial growth and phase transformations. The analyses of the schemes involve the characterization of the strictly convex energies associated with the equations. We first give a generalmore » framework for PSD in Hilbert spaces. Based on certain reasonable assumptions of the linear pre-conditioner, a geometric convergence rate is shown for the nonlinear PSD iteration. We then apply the general theory to the fourth and sixth-order problems of interest, making use of Sobolev embedding and regularity results to confirm the appropriateness of our pre-conditioners for the regularized p-Lapacian problems. Our results include a sharper theoretical convergence result for p-Laplacian systems compared to what may be found in existing works. We demonstrate rigorously how to apply the theory in the finite dimensional setting using finite difference discretization methods. Numerical simulations for some important physical application problems – including thin film epitaxy with slope selection and the square phase field crystal model – are carried out to verify the efficiency of the scheme.« less

Preconditioned steepest descent methods for some nonlinear elliptic equations involving p-Laplacian terms

NASA Astrophysics Data System (ADS)

Feng, Wenqiang; Salgado, Abner J.; Wang, Cheng; Wise, Steven M.

2017-04-01

We describe and analyze preconditioned steepest descent (PSD) solvers for fourth and sixth-order nonlinear elliptic equations that include p-Laplacian terms on periodic domains in 2 and 3 dimensions. The highest and lowest order terms of the equations are constant-coefficient, positive linear operators, which suggests a natural preconditioning strategy. Such nonlinear elliptic equations often arise from time discretization of parabolic equations that model various biological and physical phenomena, in particular, liquid crystals, thin film epitaxial growth and phase transformations. The analyses of the schemes involve the characterization of the strictly convex energies associated with the equations. We first give a general framework for PSD in Hilbert spaces. Based on certain reasonable assumptions of the linear pre-conditioner, a geometric convergence rate is shown for the nonlinear PSD iteration. We then apply the general theory to the fourth and sixth-order problems of interest, making use of Sobolev embedding and regularity results to confirm the appropriateness of our pre-conditioners for the regularized p-Lapacian problems. Our results include a sharper theoretical convergence result for p-Laplacian systems compared to what may be found in existing works. We demonstrate rigorously how to apply the theory in the finite dimensional setting using finite difference discretization methods. Numerical simulations for some important physical application problems - including thin film epitaxy with slope selection and the square phase field crystal model - are carried out to verify the efficiency of the scheme.

Optical coherence tomography for nondestructive evaluation of fuel rod degradation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renshaw, Jeremy B., E-mail: jrenshaw@epri.com; Jenkins, Thomas P., E-mail: tjenkins@metrolaserinc.com; Buckner, Benjamin D., E-mail: tjenkins@metrolaserinc.com

Nuclear power plants regularly inspect fuel rods to ensure safe and reliable operation. Excessive corrosion can cause fuel failures which can have significant repercussions for the plant, including impacts on plant operation, worker exposure to radiation, and the plant's INPO rating. While plants typically inspect for fuel rod corrosion using eddy current techniques, these techniques have known issues with reliability in the presence of tenacious, ferromagnetic crud layers that can deposit during operation, and the nondestructive evaluation (NDE) inspection results can often be in error by a factor of 2 or 3. For this reason, alternative measurement techniques, such asmore » Optical Coherence Tomography (OCT), have been evaluated that are not sensitive to the ferromagnetic nature of the crud. This paper demonstrates that OCT has significant potential to characterize the thickness of crud layers that can deposit on the surfaces of fuel rods during operation. Physical trials have been performed on simulated crud samples, and the resulting data show an apparent correlation between the crud layer thickness and the OCT signal.« less

KSC-05pd2533

NASA Image and Video Library

2005-11-30

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, United Space Alliance technician Michael Vanwart installs thermal protection system blankets in the nose cap of space shuttle Endeavour. Endeavour recently came out of a nearly two-year Orbiter Major Modification period which began in December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return-to-flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout the orbiter. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology, and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997.

KSC-05pd2531

NASA Image and Video Library

2005-11-30

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility bay 2, United Space Alliance technician Michael Vanwart prepares to install thermal protection system blankets in the nose cap of space shuttle Endeavour. Endeavour recently came out of a nearly two-year Orbiter Major Modification period which began in December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return-to-flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout the orbiter. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology, and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997.

KSC-05pd2532

NASA Image and Video Library

2005-11-30

KENNEDY SPACE CENTER, FLA. - In Orbiter Processing Facility Bay 2, United Space Alliance technician Michael Vanwart installs thermal protection system blankets in the nose cap of space shuttle Endeavour. Endeavour recently came out of a nearly two-year Orbiter Major Modification period which began in December 2003. Engineers and technicians spent 900,000 hours performing 124 modifications to the vehicle. These included all recommended return-to-flight safety modifications, bonding more than 1,000 thermal protection system tiles and inspecting more than 150 miles of wiring throughout the orbiter. Shuttle major modification periods are scheduled at regular intervals to enhance safety and performance, infuse new technology, and allow for thorough inspections of the airframe and wiring of the vehicles. This was the second of these modification periods performed entirely at Kennedy Space Center. Endeavour's previous modification was completed in March 1997.

Stress Analysis for the Critical Metal Structure of Bridge Crane

NASA Astrophysics Data System (ADS)

Ling, Zhangwei; Wang, Min; Xia, Junfang; Wang, Songhua; Guo, Xiaolian

2018-01-01

Based on the type of connection between the main girder and end beam of electrical single beam crane, the finite element analysis model of a full portal crane was established. The stress distribution of the critical structure under different loading conditions was analyzed. The results shown that the maximum Mises stress and deflection of the main girder were within the allowable range. And the connecting location between end beam web and main girder had higher stress than other region, especially at the lower edge and upper edge of the end beam web and the area near the bolt hole of upper wing panel. Therefore it is important to inspect the connection status, the stress condition and the crack situation nearing connection location during the regular inspection process to ensure the safety of the connection between the main girder and end beam.

Higher order explicit symmetric integrators for inseparable forms of coordinates and momenta

NASA Astrophysics Data System (ADS)

Liu, Lei; Wu, Xin; Huang, Guoqing; Liu, Fuyao

2016-06-01

Pihajoki proposed the extended phase-space second-order explicit symmetric leapfrog methods for inseparable Hamiltonian systems. On the basis of this work, we survey a critical problem on how to mix the variables in the extended phase space. Numerical tests show that sequent permutations of coordinates and momenta can make the leapfrog-like methods yield the most accurate results and the optimal long-term stabilized error behaviour. We also present a novel method to construct many fourth-order extended phase-space explicit symmetric integration schemes. Each scheme represents the symmetric production of six usual second-order leapfrogs without any permutations. This construction consists of four segments: the permuted coordinates, triple product of the usual second-order leapfrog without permutations, the permuted momenta and the triple product of the usual second-order leapfrog without permutations. Similarly, extended phase-space sixth, eighth and other higher order explicit symmetric algorithms are available. We used several inseparable Hamiltonian examples, such as the post-Newtonian approach of non-spinning compact binaries, to show that one of the proposed fourth-order methods is more efficient than the existing methods; examples include the fourth-order explicit symplectic integrators of Chin and the fourth-order explicit and implicit mixed symplectic integrators of Zhong et al. Given a moderate choice for the related mixing and projection maps, the extended phase-space explicit symplectic-like methods are well suited for various inseparable Hamiltonian problems. Samples of these problems involve the algorithmic regularization of gravitational systems with velocity-dependent perturbations in the Solar system and post-Newtonian Hamiltonian formulations of spinning compact objects.

The Antiaircraft Journal. Volume 94, Number 6, November-December 1951

DTIC Science & Technology

1951-12-01

authorized by the Visiting Forces Act. Getting their heads together, the Yanks and Tommies have discovered each other to be pretty regular fellows...Francis A., to 3Sth AAA Brig, Ft Meade, Md. McDaniel, Otto L., to Hq Fourth Army, Ft Sam Houston, Tex. Pape, Robin B., to SOth AAA Gp, Ft Totten , NY...to 71 Sth AAA Gun Bn, Ft Totten , NJ. Kee, Pat M., to 209th AAA Gp, Indiantown Gap, Pa. Kennaman, Jack R., to SOlst AAA Gun Bn, North Richland, Wash

The Assessment of Animal Welfare in British Zoos by Government-Appointed Inspectors

PubMed Central

Draper, Chris; Harris, Stephen

2012-01-01

Simple Summary Since 1984, British zoos have been required to meet the animal welfare standards set out under the Zoo Licensing Act 1981. Zoos are regularly assessed by government-appointed inspectors, who report on animal welfare standards in each zoo. This is the first analysis of those reports from a representative sample of British zoos. We highlight a number of concerns about the inspection process itself, and identify areas where changes would lead to improvements in both the inspection process and our ability to monitor animal welfare standards in zoos. Abstract We analysed the reports of government-appointed inspectors from 192 zoos between 2005–2008 to provide the first review of how animal welfare was assessed in British zoos since the enactment of the Zoo Licensing Act 1981. We examined the effects of whether or not a veterinarian was included in the inspection team, type of inspection, licence status of the zoo and membership of a zoo association on the inspectors’ assessments of animal welfare standards in five areas that approximate to the Five Freedoms. At least 11% of full licence inspections did not comply with the legal requirement for two inspectors. The inspectors’ reports were unclear as to how animal welfare was assessed, whether all animals or only a sub-sample had been inspected, and were based predominantly on welfare inputs rather than outcomes. Of 9,024 animal welfare assessments across the 192 zoos, 7,511 (83%) were graded as meeting the standards, 782 (9%) as substandard and the rest were not graded. Of the 192 zoos, 47 (24%) were assessed as meeting all the animal welfare standards. Membership of a zoo association was not associated with a higher overall assessment of animal welfare standards, and specialist collections such as Farm Parks and Other Bird collections performed least well. We recommend a number of changes to the inspection process that should lead to greater clarity in the assessment of animal welfare in British zoos. PMID:26487161

Scaled multisensor inspection of extended surfaces for industrial quality control

NASA Astrophysics Data System (ADS)

Kayser, Daniel; Bothe, Thorsten; Osten, Wolfgang

2002-06-01

Reliable real-time surface inspection of extended surfaces with high resolution is needed in several industrial applications. With respect to an efficient application to extended technical components such as aircraft or automotive parts, the inspection system has to perform a robust measurement with a ratio of less then 10-6 between depth resolution and lateral extension. This ratio is at least one order beyond the solutions that are offered by existing technologies. The concept of scaled topometry consists of arranging different optical measurement techniques with overlapping ranges of resolution systematically in order to receive characteristic surface information with the required accuracy. In such a surface inspection system, an active algorithm combines measurements on several scales of resolution and distinguishes between local fault indicating structures with different extensions and global geometric properties. The first part of this active algorithm finds indications of critical surface areas in the data of every measurement and separates them into different categories. The second part analyses the detected structures in the data with respect to their resolution and decides whether a further local measurement with a higher resolution has to be performed. The third part positions the sensors and starts the refined measurements. The fourth part finally integrates the measured local data set into the overall data mesh. We have constructed a laboratory setup capable of measuring surfaces with extensions up to 1500mm x 1000mm x 500mm (in x-, y- and z-direction respectively). Using this measurement system we will be able to separate the fault indicating structures on the surface from the global shape and to classify the detected structures according to their extensions and characteristic shapes simultaneously. The level of fault detection probability will be applicable by input parameter control.

Pre-use anesthesia machine check; certified anesthesia technician based quality improvement audit.

PubMed

Al Suhaibani, Mazen; Al Malki, Assaf; Al Dosary, Saad; Al Barmawi, Hanan; Pogoku, Mahdhav

2014-01-01

Quality assurance of providing a work ready machine in multiple theatre operating rooms in a tertiary modern medical center in Riyadh. The aim of the following study is to keep high quality environment for workers and patients in surgical operating rooms. Technicians based audit by using key performance indicators to assure inspection, passing test of machine worthiness for use daily and in between cases and in case of unexpected failure to provide quick replacement by ready to use another anesthetic machine. The anesthetic machines in all operating rooms are daily and continuously inspected and passed as ready by technicians and verified by anesthesiologist consultant or assistant consultant. The daily records of each machines were collected then inspected for data analysis by quality improvement committee department for descriptive analysis and report the degree of staff compliance to daily inspection as "met" items. Replaced machine during use and overall compliance. Distractive statistic using Microsoft Excel 2003 tables and graphs of sums and percentages of item studied in this audit. Audit obtained highest compliance percentage and low rate of replacement of machine which indicate unexpected machine state of use and quick machine switch. The authors are able to conclude that following regular inspection and running self-check recommended by the manufacturers can contribute to abort any possibility of hazard of anesthesia machine failure during operation. Furthermore in case of unexpected reason to replace the anesthesia machine in quick maneuver contributes to high assured operative utilization of man machine inter-phase in modern surgical operating rooms.

Numerical solution of the generalized, dissipative KdV-RLW-Rosenau equation with a compact method

NASA Astrophysics Data System (ADS)

Apolinar-Fernández, Alejandro; Ramos, J. I.

2018-07-01

The nonlinear dynamics of the one-dimensional, generalized Korteweg-de Vries-regularized-long wave-Rosenau (KdV-RLW-Rosenau) equation with second- and fourth-order dissipative terms subject to initial Gaussian conditions is analyzed numerically by means of three-point, fourth-order accurate, compact finite differences for the discretization of the spatial derivatives and a trapezoidal method for time integration. By means of a Fourier analysis and global integration techniques, it is shown that the signs of both the fourth-order dissipative and the mixed fifth-order derivative terms must be negative. It is also shown that an increase of either the linear drift or the nonlinear convection coefficients results in an increase of the steepness, amplitude and speed of the right-propagating wave, whereas the speed and amplitude of the wave decrease as the power of the nonlinearity is increased, if the amplitude of the initial Gaussian condition is equal to or less than one. It is also shown that the wave amplitude and speed decrease and the curvature of the wave's trajectory increases as the coefficients of the second- and fourth-order dissipative terms are increased, while an increase of the RLW coefficient was found to decrease both the damping and the phase velocity, and generate oscillations behind the wave. For some values of the coefficients of both the fourth-order dissipative and the Rosenau terms, it has been found that localized dispersion shock waves may form in the leading part of the right-propagating wave, and that the formation of a train of solitary waves that result from the breakup of the initial Gaussian conditions only occurs in the absence of both Rosenau's, Kortweg-de Vries's and second- and fourth-order dissipative terms, and for some values of the amplitude and width of the initial condition and the RLW coefficient. It is also shown that negative values of the KdV term result in steeper, larger amplitude and faster waves and a train of oscillations behind the wave, whereas positive values of that coefficient may result in negative phase and group velocities, no wave breakup and oscillations ahead of the right-propagating wave.

Diagnostic efficiency of abattoir meat inspection service in Ethiopia to detect carcasses infected with Mycobacterium bovis: implications for public health.

PubMed

Biffa, Demelash; Bogale, Asseged; Skjerve, Eystein

2010-08-06

Bovine Tuberculosis (BTB) is a widespread and endemic disease of cattle in Ethiopia posing a significant threat to public health. Regular surveillance by skin test, bacteriology and molecular methods is not feasible due to lack of resource. Thus, routine abattoir (RA) inspection will continue to play a key role for national surveillance. We evaluated efficiency of RA inspection for diagnosis of Mycobacterium bovis infection and discussed its public health implications in light of a high risk of human exposure. The study was conducted in five abattoirs: Addis Ababa, Adama, Hawassa, Yabello and Melge-Wondo abattoirs. The efficiency of routine abattoir (RA) inspection was validated in comparison to detailed abattoir (DA) inspection, followed by culture and microscopy (CM) and region of difference (RD) deletion analysis. Diagnostic accuracies (with corresponding measures of statistical uncertainty) were determined by computing test property statistics (sensitivity and specificity) and likelihood estimations using web-based SISA diagnostic statistics software. Post-test probability of detecting TB infected carcasses was estimated using nomograms. Agreement between RA and DA inspections was measured using kappa statistics. The study was conducted and reported in accordance with standards for reporting of diagnostic accuracy (STARD) requirements. Both routine and detailed meat inspection protocols were performed on a subpopulation of 3322 cattle selected randomly from among 78,269 cattle slaughtered during the study period. Three hundred thirty seven carcasses identified through detailed meat inspection protocols were subjected to culture and microscopy; of the 337, a subset of 105 specimens for culture and microscopy were subjected to further molecular testing. There was a substantial agreement between RA and DA inspections in Addis Ababa (Kappa = 0.7) and Melge-Wondo abattoirs (Kappa = 0.67). In Adama, Hawassa and Yabello abattoirs, the agreement was however poor (Kappa

Diagnostic efficiency of abattoir meat inspection service in Ethiopia to detect carcasses infected with Mycobacterium bovis: Implications for public health

PubMed Central

2010-01-01

Background Bovine Tuberculosis (BTB) is a widespread and endemic disease of cattle in Ethiopia posing a significant threat to public health. Regular surveillance by skin test, bacteriology and molecular methods is not feasible due to lack of resource. Thus, routine abattoir (RA) inspection will continue to play a key role for national surveillance. We evaluated efficiency of RA inspection for diagnosis of Mycobacterium bovis infection and discussed its public health implications in light of a high risk of human exposure. Methods The study was conducted in five abattoirs: Addis Ababa, Adama, Hawassa, Yabello and Melge-Wondo abattoirs. The efficiency of routine abattoir (RA) inspection was validated in comparison to detailed abattoir (DA) inspection, followed by culture and microscopy (CM) and region of difference (RD) deletion analysis. Diagnostic accuracies (with corresponding measures of statistical uncertainty) were determined by computing test property statistics (sensitivity and specificity) and likelihood estimations using web-based SISA diagnostic statistics software. Post-test probability of detecting TB infected carcasses was estimated using nomograms. Agreement between RA and DA inspections was measured using kappa statistics. The study was conducted and reported in accordance with standards for reporting of diagnostic accuracy (STARD) requirements. Both routine and detailed meat inspection protocols were performed on a subpopulation of 3322 cattle selected randomly from among 78,269 cattle slaughtered during the study period. Three hundred thirty seven carcasses identified through detailed meat inspection protocols were subjected to culture and microscopy; of the 337, a subset of 105 specimens for culture and microscopy were subjected to further molecular testing. Results There was a substantial agreement between RA and DA inspections in Addis Ababa (Kappa = 0.7) and Melge-Wondo abattoirs (Kappa = 0.67). In Adama, Hawassa and Yabello abattoirs, the agreement was however poor (Kappa ≤ 0.2). RA inspection was able to detect only 117 of the total 3322 carcasses inspected (3.5%). The sensitivity (Sn) and specificity (Sp) of RA inspection were 28.2% (95/337) [95%CI: 23.4-33.0] and 99.3% (2963/2985) [95%CI: 99.0-99.6], respectively, when DA inspection was considered as reference test. When culture and microscopy (CM) was considered as reference test, the Sn and Sp of RA were 55.2% (58/105) [95%CI: 45.7-64.7] and 84.1% (195/232) [95%CI: 79.3-88.8]. RA inspection failed to detect 71.8% (242/337) and 44.8% (47/105) of TB infected carcasses as judged by DA inspection and CM, respectively. On the other hand, a much higher sensitivity of DA was obtained when CM and RD deletion analysis were considered as reference tests (96.3% (105/109) and 100.0% (24/24), respectively). Conclusions The study results indicate that meat inspection protocols currently utilized in abattoirs are insufficient to detect the majority of TB lesions at the gross level. DA inspection protocols were demonstrated to improve the detection level by approximately 3-fold. The failure of current inspection techniques to detect approximately 70% of carcasses presented with grossly-visible lesions of TB at the slaughter-plants indicates the magnitude of meat-borne zoonotic TB as an on-going risk to public health. Standardization of abattoir inspection protocols (in line with international sanitary requirements), enhanced training and proficiency testing of meat inspections, and raising public awareness are recommended as essential and cost-effective interventions to improve meat inspection service in Ethiopia, with subsequent protection of consumers' health. PMID:20691081

Hand Hygiene: Knowledge and Attitudes of Fourth-Year Clerkship Medical Students at Alfaisal University, College of Medicine, Riyadh, Saudi Arabia.

PubMed

Hamadah, Reem; Kharraz, Razan; Alshanqity, Airabab; AlFawaz, Danah; Eshaq, Abdulaziz M; Abu-Zaid, Ahmed

2015-08-24

Little is known about the clerkship (clinical) medical students' knowledge of hand hygiene as the single most important precautionary measure to reduce nosocomial healthcare-associated infections. The aim of this study is to explore the knowledge of, and attitudes towards, hand hygiene practices among fourth-year clerkship medical students at Alfaisal University, College of Medicine, Riyadh, Saudi Arabia. A cross-sectional, paper-based, Yes/No formatted questionnaire was administered to explore the students' knowledge of, and attitudes towards, hand hygiene practices. Data were decoded in Microsoft Excel sheet and presented as numbers and percentages. One hundred and eleven students (n=111/147) participated in the questionnaire (response rate: 76%). Although the majority of students had a fair knowledge of hand hygiene practices, a number of them had some misconceptions. Only 14% of students correctly agreed to the statement: "Traditional hand washing (water, plus regular soap) decreases the number of germs." Furthermore, only 32% of students correctly answered that "hand washing with a regular soap, instead of an antiseptic soap, is better in limiting the transmission of clostridium difficile infections". Almost all students (93%) agreed to the importance of hand hygiene education in medical curricula and its awareness in healthcare centers. Despite the importance of hand hygiene, only 13% of students reviewed the respective WHO and CDC guidelines before starting their clinical training in the teaching hospital. The students' inadequate knowledge about hand hygiene needs to be enriched by well-structured curricular and extra-curricular programs as well as more positive attitudes by healthcare workers.

Misclassification rates for current smokers misclassified as nonsmokers.

PubMed

Wells, A J; English, P B; Posner, S F; Wagenknecht, L E; Perez-Stable, E J

1998-10-01

This paper provides misclassification rates for current cigarette smokers who report themselves as nonsmokers. Such rates are important in determining smoker misclassification bias in the estimation of relative risks in passive smoking studies. True smoking status, either occasional or regular, was determined for individual current smokers in 3 existing studies of nonsmokers by inspecting the cotinine levels of body fluids. The new data, combined with an approximately equal amount in the 1992 Environmental Protection Agency (EPA) report on passive smoking and lung cancer, yielded misclassification rates that not only had lower standard errors but also were stratified by sex and US minority majority status. The misclassification rates for the important category of female smokers misclassified as never smokers were, respectively, 0.8%, 6.0%, 2.8%, and 15.3% for majority regular, majority occasional, US minority regular, and US minority occasional smokers. Misclassification rates for males were mostly somewhat higher. The new information supports EPA's conclusion that smoker misclassification bias is small. Also, investigators are advised to pay attention to minority/majority status of cohorts when correcting for smoker misclassification bias.

Limited angle CT reconstruction by simultaneous spatial and Radon domain regularization based on TV and data-driven tight frame

NASA Astrophysics Data System (ADS)

Zhang, Wenkun; Zhang, Hanming; Wang, Linyuan; Cai, Ailong; Li, Lei; Yan, Bin

2018-02-01

Limited angle computed tomography (CT) reconstruction is widely performed in medical diagnosis and industrial testing because of the size of objects, engine/armor inspection requirements, and limited scan flexibility. Limited angle reconstruction necessitates usage of optimization-based methods that utilize additional sparse priors. However, most of conventional methods solely exploit sparsity priors of spatial domains. When CT projection suffers from serious data deficiency or various noises, obtaining reconstruction images that meet the requirement of quality becomes difficult and challenging. To solve this problem, this paper developed an adaptive reconstruction method for limited angle CT problem. The proposed method simultaneously uses spatial and Radon domain regularization model based on total variation (TV) and data-driven tight frame. Data-driven tight frame being derived from wavelet transformation aims at exploiting sparsity priors of sinogram in Radon domain. Unlike existing works that utilize pre-constructed sparse transformation, the framelets of the data-driven regularization model can be adaptively learned from the latest projection data in the process of iterative reconstruction to provide optimal sparse approximations for given sinogram. At the same time, an effective alternating direction method is designed to solve the simultaneous spatial and Radon domain regularization model. The experiments for both simulation and real data demonstrate that the proposed algorithm shows better performance in artifacts depression and details preservation than the algorithms solely using regularization model of spatial domain. Quantitative evaluations for the results also indicate that the proposed algorithm applying learning strategy performs better than the dual domains algorithms without learning regularization model

Evaluation of three watering and mulching techniques on transplanted trees at Adobe Dam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, C.

1983-06-01

On the basis of these transplant studies, it is recommended that a minimal irrigation schedule be followed in the future for transplanted specimens. Transplanting early in the year reduces the watering requirements. Furthermore, after a one month adjustment period, trees watered once a month did well. Removal of supplemental water should be gradual, so as not to cause shock to the trees. Stone mulch appears to be both durable and effective as a mulching material, and can be cost effective if readily available on site. Fencing is a requirement for Palo Verde and Mesquite transplants but can be foregone onmore » Creosote. Management following transplanting should include regular site inspections for signs of insect infestation and for watering problems. Inspection personnel should watch for signs that transplants have been watered adequately and the fences are intact and not restricting tree growth.« less

Application of Ultrasonic Phased Array Technology to the Detection of Defect in Composite Stiffened-structures

NASA Astrophysics Data System (ADS)

Zhou, Yuan-Qi; Zhan, Li-Hua

2016-05-01

Composite stiffened-structure consists of the skin and stringer has been widely used in aircraft fuselage and wings. The main purpose of the article is to detect the composite material reinforced structure accurately and explore the relationship between defect formation and structural elements or curing process. Based on ultrasonic phased array inspection technology, the regularity of defects in the manufacture of composite materials are obtained, the correlation model between actual defects and nondestructive testing are established. The article find that the forming quality of deltoid area in T-stiffened structure is obviously improved by pre-curing, the defects of hat-stiffened structure are affected by the mandrel. The results show that the ultrasonic phased array inspection technology can be an effectively way for the detection of composite stiffened-structures, which become an important means to control the defects of composite and improve the quality of the product.

Continuous integration and quality control for scientific software

NASA Astrophysics Data System (ADS)

Neidhardt, A.; Ettl, M.; Brisken, W.; Dassing, R.

2013-08-01

Modern software has to be stable, portable, fast and reliable. This is going to be also more and more important for scientific software. But this requires a sophisticated way to inspect, check and evaluate the quality of source code with a suitable, automated infrastructure. A centralized server with a software repository and a version control system is one essential part, to manage the code basis and to control the different development versions. While each project can be compiled separately, the whole code basis can also be compiled with one central “Makefile”. This is used to create automated, nightly builds. Additionally all sources are inspected automatically with static code analysis and inspection tools, which check well-none error situations, memory and resource leaks, performance issues, or style issues. In combination with an automatic documentation generator it is possible to create the developer documentation directly from the code and the inline comments. All reports and generated information are presented as HTML page on a Web server. Because this environment increased the stability and quality of the software of the Geodetic Observatory Wettzell tremendously, it is now also available for scientific communities. One regular customer is already the developer group of the DiFX software correlator project.

Thermal tracking in mobile robots for leak inspection activities.

PubMed

Ibarguren, Aitor; Molina, Jorge; Susperregi, Loreto; Maurtua, Iñaki

2013-10-09

Maintenance tasks are crucial for all kind of industries, especially in extensive industrial plants, like solar thermal power plants. The incorporation of robots is a key issue for automating inspection activities, as it will allow a constant and regular control over the whole plant. This paper presents an autonomous robotic system to perform pipeline inspection for early detection and prevention of leakages in thermal power plants, based on the work developed within the MAINBOT (http://www.mainbot.eu) European project. Based on the information provided by a thermographic camera, the system is able to detect leakages in the collectors and pipelines. Beside the leakage detection algorithms, the system includes a particle filter-based tracking algorithm to keep the target in the field of view of the camera and to avoid the irregularities of the terrain while the robot patrols the plant. The information provided by the particle filter is further used to command a robot arm, which handles the camera and ensures that the target is always within the image. The obtained results show the suitability of the proposed approach, adding a tracking algorithm to improve the performance of the leakage detection system.

Thermal Tracking in Mobile Robots for Leak Inspection Activities

PubMed Central

Ibarguren, Aitor; Molina, Jorge; Susperregi, Loreto; Maurtua, Iñaki

2013-01-01

Maintenance tasks are crucial for all kind of industries, especially in extensive industrial plants, like solar thermal power plants. The incorporation of robots is a key issue for automating inspection activities, as it will allow a constant and regular control over the whole plant. This paper presents an autonomous robotic system to perform pipeline inspection for early detection and prevention of leakages in thermal power plants, based on the work developed within the MAINBOT (http://www.mainbot.eu) European project. Based on the information provided by a thermographic camera, the system is able to detect leakages in the collectors and pipelines. Beside the leakage detection algorithms, the system includes a particle filter-based tracking algorithm to keep the target in the field of view of the camera and to avoid the irregularities of the terrain while the robot patrols the plant. The information provided by the particle filter is further used to command a robot arm, which handles the camera and ensures that the target is always within the image. The obtained results show the suitability of the proposed approach, adding a tracking algorithm to improve the performance of the leakage detection system. PMID:24113684

Ultrasonic Wall Thickness Monitoring at High Temperatures (>500 °C)

NASA Astrophysics Data System (ADS)

Cegla, F. B.; Allin, J.; Davies, J. O.; Collins, P.; Cawley, P.

2011-06-01

Corrosion and erosion shorten the life of components that are used in the petrochemical industry. In order to mitigate the safety and financial risks posed by the degradation mechanisms, plant operators monitor wall thicknesses at regular inspection intervals. In high temperature locations inspections have to be carried out at plant shut downs because conventional ultrasonic sensors cannot withstand the high operating temperatures. The authors have developed a waveguide based high temperature thickness gauge for monitoring of wall thicknesses in high temperature areas. The waveguide allows the use of conventional transduction systems (max temp. 60 °C) at one end and guides ultrasonic waves into the high temperature region where the inspection is to be carried out. Slender stainless steel waveguides allow a temperature drop of ˜500-600 °C per 200 mm length to be sustained simply by natural convection cooling. This paper describes the technical challenges that had to be overcome (dispersion and source/receiver characteristics) in order to implement this "acoustic cable". A range of experimental results of thickness measurements on components of different thickness, and furnace tests at different temperatures are presented. An accelerated corrosion test that demonstrates the effectiveness of the monitoring for corrosion is also presented.

[Modern approaches to carrying out preventive examinations of workers of vibration-dangerous occupations].

PubMed

Zheglova, A V; Fedina, I N

The article presents scientific evidence showing the relevance and importance of addressing the issues of improvement of methods and approaches to the implementation of routine inspections of the working population, particularly the workers of vibration-dangerous occupations; the studied interrelationships between the exposure dose of vibration and noise will allow to include these investigations in a program of regular medical examinations of employees to detect early changes in the body of workers exposed to the vibration-dangerous impact.

How to maintain chain drives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wright, J.L.

1992-06-18

Properly selected and maintained chain drives can be expected to give thousands of hours of reliable service. Selection is usually done just once. This paper reports on good maintenance which must be done regularly to keep the drive operating. An effective maintenance program for roller chain should include correct type and adequate amounts of lubrication, replacement of worn chains and sprockets, and elimination of drive interferences. It is important to set u a lubrication and inspection/correction schedule to ensure that all required maintenance is carried out.

A reassessment of the indicators of primary education quality in developing countries: Emerging evidence from Tanzania

NASA Astrophysics Data System (ADS)

Mosha, Herme Joseph

1988-03-01

This article seeks to identify factors affecting the quality of primary education in five regions of Tanzania by extensively reviewing relevant literature and empirical data. Some of the shortcomings emphasised by the author are: frequent staff turnover, declining financial support for primary education, ineffective curricula, shortage of teachers' guides and textbooks, and unfavourable working conditions for teachers in rural areas. Beyond this, the need for freely available material, efficient school management and regular inspections is stressed by the author.

KSC-00pp1340

NASA Image and Video Library

2000-09-13

During pre-pack and fit check on his launch and entry suit, STS-92 Commander Brian Duffy adjusts his helmet. Duffy and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. This mission will be Duffy’s fourth Shuttle flight. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program

Monitoring of subsurface extended cavities prone to instabilities

NASA Astrophysics Data System (ADS)

Bigarre, Pascal; Nadim, Charles-Édouard; Lahaie, Frantz

2010-05-01

Natural or abandoned anthropogenic cavities are to be found in various contexts all around the world. In France, shallow cavities count rises up to several hundreds of thousands. It concerns complex cavities as old abandoned multilevel quarries, extended mines or naturally interlaced karsts. Risk assessment related to these cavities, such as sinkholes or pillar failure, conducts usually to short term strategy based on regular visual inspections until a more definitive risk reduction strategy is adopted. However, if no definitive remediation appears as feasible, for technical or socio-economic reasons, monitoring by regular visual inspection of specialists rises several crucial issues in the long term: safety conditions for the inspection team, limited reactivity of the monitoring due to the period between two inspections and finally difficulties to detect reliably and exhaustively early signs of evolution when local disorders are spread over a large underground area. Several well-proofed techniques are available to detect subsurface cavities, but it is less common when considering field instrumentation applied to permanent monitoring in such context. Indeed, classical geotechnical measurement based on strain and displacement sensors give very local information and cannot be deployed at a large scale with a correct coverage within a reasonable cost/benefit ratio. Moreover this type of instrumentation requires significant efforts and equipment for installation underground, must be placed right inside the most hazardous zones whenever it is feasible and is often not retrievable. Yet a continuous remote monitoring can save a regular control on site and may provide unique information about the kinetic of potential sinkholes and local ground failures. To proceed with this matter, INERIS develops and tests new tools and methods to facilitate the setting up of operational devices for remote monitoring and alert applied to subsurface extended cavities. Such systems aim to detect and characterize unstable evolution, especially sinkholes, and to circumvent all issues mentioned previously. Thus, among the different approaches currently studied, the most promising is aerial acoustic listening. Along with microseismic, this method enables volumetric monitoring over a large extended area characterized by deep quietness. Specific high sensitivity microphone probes have been developed and surveys have been conducted in two abandoned iron mines. Dimensioning physical parameters, depending on the geometry of the site and the density of sensors, were measured: listening area, acoustic sensitivity and velocity, attenuation of pressure waves, etc. Off-line processing of source localization was also studied and very good results were obtained. Along with acoustic listening, alternative new sensors are tested, as rock debris falls detecting nets installed in selected areas and easy-to-anchor microseismic probes for detection of fracturing processes inside the surrounding mass. The paper the authors intend to present will describe the research and field work conducted in this domain thanks to the French ministry of ecology and sustainable development. Principal results, limitations and recommendations concerning tested techniques and associated strategies will be discussed. Feedback from an operational system run in a closed salt mine will also be illustrated and discussed.

[Atrial fibrillation and prolonged nocturnal cardiac arrests in a patient with obstructive sleep apnea syndrome. Successful correction of disorders by CPAP therapy].

PubMed

Bairambekov, E Sh; Pevzner, A V; Litvin, A Yu; Fomicheva, O A

The case history of a 46-year-old patient with obstructive sleep apnea syndrome was analyzed. The examination revealed fourth-degree obesity, prior myocardial infarction, persistent atrial fibrillation with nocturnal asystoles lasting as long as 14.3 sec. During selected drug therapy and regular application of secondary ventilation (continuous positive airway pressure (CPAP) therapy) used to correct breathing problems, there was a reduction in the signs of circulatory deficiency, cessation of cardiac pauses, and recovery of sinus rhythm. The therapeutic effect persisted during a 24-month follow-up.

Indirect (source-free) integration method. II. Self-force consistent radial fall

NASA Astrophysics Data System (ADS)

Ritter, Patxi; Aoudia, Sofiane; Spallicci, Alessandro D. A. M.; Cordier, Stéphane

2016-12-01

We apply our method of indirect integration, described in Part I, at fourth order, to the radial fall affected by the self-force (SF). The Mode-Sum regularization is performed in the Regge-Wheeler gauge using the equivalence with the harmonic gauge for this orbit. We consider also the motion subjected to a self-consistent and iterative correction determined by the SF through osculating stretches of geodesics. The convergence of the results confirms the validity of the integration method. This work complements and justifies the analysis and the results appeared in [Int. J. Geom. Meth. Mod. Phys. 11 (2014) 1450090].

Gaps in Border Controls Are Related to Quarantine Alien Insect Invasions in Europe

PubMed Central

Bacon, Steven James; Bacher, Sven; Aebi, Alexandre

2012-01-01

Alien insects are increasingly being dispersed around the world through international trade, causing a multitude of negative environmental impacts and billions of dollars in economic losses annually. Border controls form the last line of defense against invasions, whereby inspectors aim to intercept and stop consignments that are contaminated with harmful alien insects. In Europe, member states depend on one another to prevent insect introductions by operating a first point of entry rule – controlling goods only when they initially enter the continent. However, ensuring consistency between border control points is difficult because there exists no optimal inspection strategy. For the first time, we developed a method to quantify the volume of agricultural trade that should be inspected for quarantine insects at border control points in Europe, based on global agricultural trade of over 100 million distinct origin-commodity-species-destination pathways. This metric was then used to evaluate the performance of existing border controls, as measured by border interception results in Europe between 2003 and 2007. Alarmingly, we found significant gaps between the trade pathways that should be inspected and actual number of interceptions. Moreover, many of the most likely introduction pathways yielded none or very few insect interceptions, because regular interceptions are only made on only a narrow range of pathways. European countries with gaps in border controls have been invaded by higher numbers of quarantine alien insect species, indicating the importance of proper inspections to prevent insect invasions. Equipped with an optimal inspection strategy based on the underlying risks of trade, authorities globally will be able to implement more effective and consistent border controls. PMID:23112835

Increasing reticle inspection efficiency and reducing wafer print-checks using automated defect classification and simulation

NASA Astrophysics Data System (ADS)

Ryu, Sung Jae; Lim, Sung Taek; Vacca, Anthony; Fiekowsky, Peter; Fiekowsky, Dan

2013-09-01

IC fabs inspect critical masks on a regular basis to ensure high wafer yields. These requalification inspections are costly for many reasons including the capital equipment, system maintenance, and labor costs. In addition, masks typically remain in the "requal" phase for extended, non-productive periods of time. The overall "requal" cycle time in which reticles remain non-productive is challenging to control. Shipping schedules can slip when wafer lots are put on hold until the master critical layer reticle is returned to production. Unfortunately, substituting backup critical layer reticles can significantly reduce an otherwise tightly controlled process window adversely affecting wafer yields. One major requal cycle time component is the disposition process of mask inspections containing hundreds of defects. Not only is precious non-productive time extended by reviewing hundreds of potentially yield-limiting detections, each additional classification increases the risk of manual review techniques accidentally passing real yield limiting defects. Even assuming all defects of interest are flagged by operators, how can any person's judgment be confident regarding lithographic impact of such defects? The time reticles spend away from scanners combined with potential yield loss due to lithographic uncertainty presents significant cycle time loss and increased production costs. Fortunately, a software program has been developed which automates defect classification with simulated printability measurement greatly reducing requal cycle time and improving overall disposition accuracy. This product, called ADAS (Auto Defect Analysis System), has been tested in both engineering and high-volume production environments with very successful results. In this paper, data is presented supporting significant reduction for costly wafer print checks, improved inspection area productivity, and minimized risk of misclassified yield limiting defects.

Experimental investigation by laser ultrasonics for high speed train axle diagnostics.

PubMed

Cavuto, A; Martarelli, M; Pandarese, G; Revel, G M; Tomasini, E P

2015-01-01

The present paper demonstrates the applicability of a laser-ultrasonic procedure to improve the performances of train axle ultrasonic inspection. The method exploits an air-coupled ultrasonic probe that detects the ultrasonic waves generated by a high-power pulsed laser. As a result, the measurement chain is completely non-contact, from generation to detection, this making it possible to considerably speed up inspection time and make the set-up more flexible. The main advantage of the technique developed is that it works in thermo-elastic regime and it therefore can be considered as a non-destructive method. The laser-ultrasonic procedure investigated has been applied for the inspection of a real high speed train axle provided by the Italian railway company (Trenitalia), on which typical fatigue defects have been expressly created according to standard specifications. A dedicated test bench has been developed so as to rotate the axle with the angle control and to speed up the inspection of the axle surface. The laser-ultrasonic procedure proposed can be automated and is potentially suitable for regular inspection of train axles. The main achievements of the activity described in this paper are: – the study of the effective applicability of laser-ultrasonics for the diagnostic of train hollow axles with variable sections by means of a numerical FE model, – the carrying out of an automated experiment on a real train axle, – the analysis of the sensitivity to experimental parameters, like laser source – receiving probe distance and receiving probe angular position, – the demonstration that the technique is suitable for the detection of surface defects purposely created on the train axle. Copyright © 2014 Elsevier B.V. All rights reserved.

The reliability of detecting digital dermatitis in the milking parlour.

PubMed

Stokes, J E; Leach, K A; Main, D C J; Whay, H R

2012-09-01

Digital dermatitis (DD) is currently the most problematic infectious skin disease in dairy cattle associated with lameness. Reducing the disease prevalence through early detection and treatment is an essential management tool. The traditional detection method involves lifting and inspecting the feet in a cattle crush, but this is a time intensive and costly practice and impractical for regular detection of individual cases or monitoring herd prevalence. This study aimed to establish the accuracy of detecting and classifying DD lesions in traditional (pit) milking parlours compared with a borescope, and a gold standard lifted foot inspection. With the exception of one lesion, parlour screening was as accurate as the lifted foot inspection in determining the presence of 86 DD lesions on 160 hind feet (99% agreement; κ 0.99; sensitivity 1.00; specificity 0.99). Describing lesions by colour, depth or stage of lesion in the parlour or using the borescope reached substantial agreement with the gold standard. The stage of lesion was closely linked to colour and depth descriptors. There was greater agreement when categorising more advanced stages of disease progression. Borescope and parlour inspections led to both over and under recording of actual size, particularly in smaller lesions. Screening cows in traditional milking parlours for the presence of DD was found to be an accurate and practical means of detecting lesions. This method should be considered for on farm use to evaluate DD prevention and treatment strategies. Copyright © 2012 Elsevier Ltd. All rights reserved.

Risk and protective behaviours for residential carbon monoxide poisoning.

PubMed

Rupert, Douglas J; Poehlman, Jon A; Damon, Scott A; Williams, Peyton N

2013-04-01

Unintentional, non-fire-related carbon monoxide (CO) poisoning is a leading cause of poisoning death and injury in the USA. Residential poisonings caused by faulty furnaces are the most common type of CO exposure. However, these poisonings are largely preventable with annual furnace inspections and CO alarm installation. This study aimed to identify the knowledge, attitudes and beliefs that might lead consumers to adopt these protective behaviours. In August 2009, four focus groups (n=29) were conducted with homeowners in Chicago, Illinois, USA, to identify the knowledge, attitudes and beliefs that lead consumers to adopt risk and protective behaviours. Discussions were transcribed and the findings were analysed using an ordered meta-matrix. Focus group participants were aware of CO poisoning and supported the idea of regular furnace inspections. However, few participants consistently scheduled professional inspections for fear of costly repairs and unscrupulous contractors. Participants often owned CO alarms, but many did not locate them properly, nor maintain them. Some participants confused CO and natural gas and were unsure how to react if a CO alarm sounds. Participants stated that incentives, such as discounts and inspector selection tips, would make them more likely to schedule furnace inspections. Participants also identified trustworthy sources for CO education, including realtors, fire departments, home insurance agents and local media outlets. Participants' residential CO risk behaviours are not random but driven by underlying knowledge, attitudes and beliefs. Correcting misperceptions, providing incentives and partnering with trustworthy sources might encourage greater consumer adoption of protective behaviours.

Quality control and improvement of cancer care: what is needed? 4th European Roundtable Meeting (ERTM) May 5th, 2017, Berlin, Germany.

PubMed

Ortmann, Olaf; Helbig, Ulrike; Torode, Julie; Schreck, Stefan; Karjalainen, Sakari; Bettio, Manola; Ringborg, Ulrik; Klinkhammer-Schalke, Monika; Bray, Freddy

2018-06-01

National Cancer Control Plans (NCCPs) often describe structural requirements for high quality cancer care. During the fourth European Roundtable Meeting (ERTM) participants shared learnings from their own national setting to formulate best practice in optimizing communication strategies between parties involved in clinical cancer registries, cancer centers and guideline groups. A decentralized model of data collection close to the patient and caregiver enhances timely completion and the quality of the data captured. Nevertheless, central coordination is necessary to define datasets, indicators, standard settings, education, training and quality control to maintain standards across the network. In particular, interaction of parties in cancer care network has to be established and maintained on a regular basis. After establishing the structural requirements of cancer care networks, communication between the different components and parties is required to analyze outcome data, provide regular reporting to all and develop strategies for continuous improvement of quality across the network.

Optimal guidance law development for an advanced launch system

NASA Technical Reports Server (NTRS)

Calise, Anthony J.; Leung, Martin S. K.

1995-01-01

The objective of this research effort was to develop a real-time guidance approach for launch vehicles ascent to orbit injection. Various analytical approaches combined with a variety of model order and model complexity reduction have been investigated. Singular perturbation methods were first attempted and found to be unsatisfactory. The second approach based on regular perturbation analysis was subsequently investigated. It also fails because the aerodynamic effects (ignored in the zero order solution) are too large to be treated as perturbations. Therefore, the study demonstrates that perturbation methods alone (both regular and singular perturbations) are inadequate for use in developing a guidance algorithm for the atmospheric flight phase of a launch vehicle. During a second phase of the research effort, a hybrid analytic/numerical approach was developed and evaluated. The approach combines the numerical methods of collocation and the analytical method of regular perturbations. The concept of choosing intelligent interpolating functions is also introduced. Regular perturbation analysis allows the use of a crude representation for the collocation solution, and intelligent interpolating functions further reduce the number of elements without sacrificing the approximation accuracy. As a result, the combined method forms a powerful tool for solving real-time optimal control problems. Details of the approach are illustrated in a fourth order nonlinear example. The hybrid approach is then applied to the launch vehicle problem. The collocation solution is derived from a bilinear tangent steering law, and results in a guidance solution for the entire flight regime that includes both atmospheric and exoatmospheric flight phases.

Risk factors for persistent airflow limitation: Analysis of 306 patients with asthma.

PubMed

Wang, Lingcheng; Gao, Shuncui; Zhu, Wei; Su, Jun

2014-01-01

Objectives : To determine the risk factors associated with persistent airflow limitation in patients with asthma. Method s: This study was designed and carried out in the department of respiratory medicine, fourth People's Hospital of Jinan City, Shandong province, China between Jan 2012 and Dec 2012. Three hundred and six asthma patients participating in the study were divided into persistent airflow limitation group (PAFL) and no persistent airflow limitation group (NPAFL). The patients participated in pulmonary function tests and sputum induction examination. The clinical data including age, gender, onset age, disease course, smoking history, family history, regular corticosteroid inhalation, hospitalization history and presence of atopy were collected. Results : In 306 patients, 128 (40.5%) were included in PAFL group and 178(59.5%) in NPAFL group. Multivariate analysis demonstrated smoking (≥10 pack-years; OR, 7.1; 95% CI, 1.8 to 31.2), longer asthma duration (≥ 20years) (OR, 6.3; 95% CI, 1.7 to 28.5), absence of regular corticosteroid inhalation (OR, 3.5; 95% CI, 1.1 to 14.5) and neutrophil in induced sputum≥65% (OR, 1.8; 95% CI, 1.0 to 2.8) were independent risk factors for PAFL. Conclusions : Smoking, longer asthma duration and increased neutrophil in induced sputum are risk factors for PAFL, while regular corticosteroid inhalation is protective factor. Smoking cessation and regular corticosteroid inhalation may play an important role in preventing the occurrence of persistent airflow limitation group (PAFL).

Comprehension Tools for Teachers: Reading for Understanding from Prekindergarten through Fourth Grade

PubMed Central

Connor, Carol McDonald; Phillips, Beth M.; Kaschak, Michael; Apel, Kenn; Kim, Young-Suk; Al Otaiba, Stephanie; Crowe, Elizabeth C.; Thomas-Tate, Shurita; Johnson, Lakeisha Cooper; Lonigan, Christopher J.

2015-01-01

This paper describes the theoretical framework, as well as the development and testing of the intervention, Comprehension Tools for Teachers (CTT), which is composed of eight component interventions targeting malleable language and reading comprehension skills that emerging research indicates contribute to proficient reading for understanding for prekindergarteners through fourth graders. Component interventions target processes considered largely automatic as well as more reflective processes, with interacting and reciprocal effects. Specifically, we present component interventions targeting cognitive, linguistic, and text-specific processes, including morphological awareness, syntax, mental-state verbs, comprehension monitoring, narrative and expository text structure, enacted comprehension, academic knowledge, and reading to learn from informational text. Our aim was to develop a tool set composed of intensive meaningful individualized small group interventions. We improved feasibility in regular classrooms through the use of design-based iterative research methods including careful lesson planning, targeted scripting, pre- and postintervention proximal assessments, and technology. In addition to the overall framework, we discuss seven of the component interventions and general results of design and efficacy studies. PMID:26500420

Pattern centric design based sensitive patterns and process monitor in manufacturing

NASA Astrophysics Data System (ADS)

Hsiang, Chingyun; Cheng, Guojie; Wu, Kechih

2017-03-01

When design rule is mitigating to smaller dimension, process variation requirement is tighter than ever and challenges the limits of device yield. Masks, lithography, etching and other processes have to meet very tight specifications in order to keep defect and CD within the margins of the process window. Conventionally, Inspection and metrology equipments are utilized to monitor and control wafer quality in-line. In high throughput optical inspection, nuisance and review-classification become a tedious labor intensive job in manufacturing. Certain high-resolution SEM images are taken to validate defects after optical inspection. These high resolution SEM images catch not only optical inspection highlighted point, also its surrounding patterns. However, this pattern information is not well utilized in conventional quality control method. Using this complementary design based pattern monitor not only monitors and analyzes the variation of patterns sensitivity but also reduce nuisance and highlight defective patterns or killer defects. After grouping in either single or multiple layers, systematic defects can be identified quickly in this flow. In this paper, we applied design based pattern monitor in different layers to monitor process variation impacts on all kinds of patterns. First, the contour of high resolutions SEM image is extracted and aligned to design with offset adjustment and fine alignment [1]. Second, specified pattern rules can be applied on design clip area, the same size as SEM image, and form POI (pattern of interest) areas. Third, the discrepancy of contour and design measurement at different pattern types in measurement blocks. Fourth, defective patterns are reported by discrepancy detection criteria and pattern grouping [4]. Meanwhile, reported pattern defects are ranked by number and severity by discrepancy. In this step, process sensitive high repeatable systematic defects can be identified quickly Through this design based process pattern monitor method, most of optical inspection nuisances can be filtered out at contour to design discrepancy measurement. Daily analysis results are stored at database as reference to compare with incoming data. Defective pattern library contains existing and known systematic defect patterns which help to catch and identify new pattern defects or process impacts. On the other hand, this defect pattern library provides extra valuable information for mask, pattern and defects verification, inspection care area generation, further OPC fix and process enhancement and investigation.

KSC-00pp1342

NASA Image and Video Library

2000-09-13

During pre-pack and fit check, STS-92 Commander Brian Duffy tests his launch and entry suit for comfort and ease while sitting. This mission will be Duffy’s fourth Shuttle flight. He and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program

KSC00pp1342

NASA Image and Video Library

2000-09-13

During pre-pack and fit check, STS-92 Commander Brian Duffy tests his launch and entry suit for comfort and ease while sitting. This mission will be Duffy’s fourth Shuttle flight. He and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program

National Program of Inspection of Non-Federal Dams, Tennessee. 8th Avenue Reservoir (Inventory Number TN 03719), Cumberland River Basin, Nashville, Davidson County, Tennessee. Phase I Investigation Report,

DTIC Science & Technology

1981-09-01

the rock, the other end attached to a linear potentiometer sensor . All sensors would be connected by underground cable to a central control terminal...soil and rock mass comprising the subfoundation. We have also placed four tiltmeters on the top of the reservoir wall at Its Intersection with the axes...quarter points. These, too, must nut be disturbed. The holes prepared for instrumentation are being regularly "read" with a Digitilt Sensor blaxial

Image denoising via fundamental anisotropic diffusion and wavelet shrinkage: a comparative study

NASA Astrophysics Data System (ADS)

Bayraktar, Bulent; Analoui, Mostafa

2004-05-01

Noise removal faces a challenge: Keeping the image details. Resolving the dilemma of two purposes (smoothing and keeping image features in tact) working inadvertently of each other was an almost impossible task until anisotropic dif-fusion (AD) was formally introduced by Perona and Malik (PM). AD favors intra-region smoothing over inter-region in piecewise smooth images. Many authors regularized the original PM algorithm to overcome its drawbacks. We compared the performance of denoising using such 'fundamental' AD algorithms and one of the most powerful multiresolution tools available today, namely, wavelet shrinkage. The AD algorithms here are called 'fundamental' in the sense that the regularized versions center around the original PM algorithm with minor changes to the logic. The algorithms are tested with different noise types and levels. On top of the visual inspection, two mathematical metrics are used for performance comparison: Signal-to-noise ratio (SNR) and universal image quality index (UIQI). We conclude that some of the regu-larized versions of PM algorithm (AD) perform comparably with wavelet shrinkage denoising. This saves a lot of compu-tational power. With this conclusion, we applied the better-performing fundamental AD algorithms to a new imaging modality: Optical Coherence Tomography (OCT).

Unexpected series of regular frequency spacing of δ Scuti stars in the non-asymptotic regime. II. Sample-Echelle diagrams and rotation

DOE PAGES

Paparo, M.; Benko, J. M.; Hareter, M.; ...

2016-06-17

A sequence search method was developed for searching for regular frequency spacing in δ Scuti stars by visual inspection (VI) and algorithmic search. The sample contains 90 δ Scuti stars observed by CoRoT. An example is given to represent the VI. The algorithm (SSA) is described in detail. The data treatment of the CoRoT light curves, the criteria for frequency filtering, and the spacings derived by two methods (i.e., three approaches: VI, SSA, and FT) are given for each target. Echelle diagrams are presented for 77 targets for which at least one sequence of regular spacing was identified. Comparing the spacing and the shifts between pairs of echelle ridges revealed that at least one pair of echelle ridges is shifted to midway between the spacing for 22 stars. The estimated rotational frequencies compared to the shifts revealed rotationally split doublets, triplets, and multiplets not only for single frequencies, but for the complete echelle ridges in 31 δ Scuti stars. Furthermore, using several possible assumptions for the origin of the spacings, we derived the large separation (more » $${\\rm{\\Delta }}\

Unexpected series of regular frequency spacing of δ Scuti stars in the non-asymptotic regime. II. Sample-Echelle diagrams and rotation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paparo, M.; Benko, J. M.; Hareter, M.

A sequence search method was developed for searching for regular frequency spacing in δ Scuti stars by visual inspection (VI) and algorithmic search. The sample contains 90 δ Scuti stars observed by CoRoT. An example is given to represent the VI. The algorithm (SSA) is described in detail. The data treatment of the CoRoT light curves, the criteria for frequency filtering, and the spacings derived by two methods (i.e., three approaches: VI, SSA, and FT) are given for each target. Echelle diagrams are presented for 77 targets for which at least one sequence of regular spacing was identified. Comparing the spacing and the shifts between pairs of echelle ridges revealed that at least one pair of echelle ridges is shifted to midway between the spacing for 22 stars. The estimated rotational frequencies compared to the shifts revealed rotationally split doublets, triplets, and multiplets not only for single frequencies, but for the complete echelle ridges in 31 δ Scuti stars. Furthermore, using several possible assumptions for the origin of the spacings, we derived the large separation (more » $${\\rm{\\Delta }}\

Hyperspectral range imaging for transportation systems evaluation

NASA Astrophysics Data System (ADS)

Bridgelall, Raj; Rafert, J. B.; Atwood, Don; Tolliver, Denver D.

2016-04-01

Transportation agencies expend significant resources to inspect critical infrastructure such as roadways, railways, and pipelines. Regular inspections identify important defects and generate data to forecast maintenance needs. However, cost and practical limitations prevent the scaling of current inspection methods beyond relatively small portions of the network. Consequently, existing approaches fail to discover many high-risk defect formations. Remote sensing techniques offer the potential for more rapid and extensive non-destructive evaluations of the multimodal transportation infrastructure. However, optical occlusions and limitations in the spatial resolution of typical airborne and space-borne platforms limit their applicability. This research proposes hyperspectral image classification to isolate transportation infrastructure targets for high-resolution photogrammetric analysis. A plenoptic swarm of unmanned aircraft systems will capture images with centimeter-scale spatial resolution, large swaths, and polarization diversity. The light field solution will incorporate structure-from-motion techniques to reconstruct three-dimensional details of the isolated targets from sequences of two-dimensional images. A comparative analysis of existing low-power wireless communications standards suggests an application dependent tradeoff in selecting the best-suited link to coordinate swarming operations. This study further produced a taxonomy of specific roadway and railway defects, distress symptoms, and other anomalies that the proposed plenoptic swarm sensing system would identify and characterize to estimate risk levels.

A drift chamber tracking system for muon scattering tomography applications

NASA Astrophysics Data System (ADS)

Burns, J.; Quillin, S.; Stapleton, M.; Steer, C.; Snow, S.

2015-10-01

Muon scattering tomography (MST) allows the identification of shielded high atomic number (high-Z) materials by measuring the scattering angle of cosmic ray muons passing through an inspection region. Cosmic ray muons scatter to a greater degree due to multiple Coulomb scattering in high-Z materials than low-Z materials, which can be measured as the angular difference between the incoming and outgoing trajectories of each muon. Measurements of trajectory are achieved by placing position sensitive particle tracking detectors above and below the inspection volume. By localising scattering information, the point at which a series of muons scatter can be used to reconstruct an image, differentiating high, medium and low density objects. MST is particularly useful for differentiating between materials of varying density in volumes that are difficult to inspect visually or by other means. This paper will outline the experimental work undertaken to develop a prototype MST system based on drift chamber technology. The planar drift chambers used in this prototype measure the longitudinal interaction position of an ionising particle from the time taken for elections, liberated in the argon (92.5%), carbon dioxide (5%), methane (2.5%) gas mixture, to reach a central anode wire. Such a system could be used to enhance the detection of shielded radiological material hidden within regular shipping cargo.

Regulation of firearm dealers in the United States: an analysis of state law and opportunities for improvement.

PubMed

Vernick, Jon S; Webster, Daniel W; Bulzacchelli, Maria T; Mair, Julie Samia

2006-01-01

Firearms were associated with 30, 136 deaths in the United States in 2003. Most guns are initially sold to the public through a network of retail dealers. Licensed firearm dealers are an important source of guns for criminals and gun traffickers. Just one percent of licensed dealers were responsible for more than half of all guns traced to crime. Federal law makes it difficult for ATF to inspect and revoke the licenses of problem gun dealers. State licensing systems, however, are a greatly under-explored opportunity for firearm dealer oversight. We identify and categorize these state systems to identify opportunities for interventions to prevent problem dealers from supplying guns to criminals, juveniles, or gun traffickers. Just seventeen states license gun dealers. Twenty-three states permit routine inspections of dealers but only two mandate that those inspections occur on a regular basis. Twenty-six states impose record-keeping requirements for gun sales. Only thirteen states require some form of store security measures to minimize firearm theft. We conclude with recommendations for a comprehensive system of state licensing and oversight of gun dealers. Our findings can be useful for the coalition of more than fifty U.S. mayors that recently announced it would work together to combat illegal gun trafficking.

Eating out: consumer perceptions of food safety.

PubMed

Worsfold, Denise

2006-06-01

The purpose of this investigation was to improve the understanding of the public's perception of hygiene standards in eating places and their knowledge of the inspection system. A telephone survey found that despite many claiming experience of food poisoning, and a widely held belief that using eating places may result in illness, people continue to eat out or purchase takeaways regularly. Nearly all respondents claimed that the standard of food hygiene was important to them when deciding where to eat out. Assessments of hygiene standards were mainly based on aesthetics. A minority had concerns/complaints about the hygiene standards of eating places they had used. People do not appear to be well informed about the role of the local authorities in protecting food safety and how the food safety laws are enforced. They believe that they have the right to know the result of a hygiene inspection. Half of them thought that it was difficult to find information on the hygiene standards of eating places. If access to information was easier, some consumers would eat out more often. The public will need to be educated on the inspection and enforcement process if 'scores on doors' is adopted as the main method of raising the confidence of the public in the standards of the food industry.

Is a "Phoenician" reading style superior to a "Chinese" reading style? Evidence from fourth graders.

PubMed

Bowey, Judith A

2008-07-01

This study compared normally achieving fourth-grade "Phoenician" readers, who identify nonwords significantly more accurately than they do exception words, with "Chinese" readers, who show the reverse pattern. Phoenician readers scored lower than Chinese readers on word identification, exception word reading, orthographic choice, spelling, reading comprehension, and verbal ability. When compared with normally achieving children who read nonwords and exception words equally well, Chinese readers scored as well as these children on word identification, regular word reading, orthographic choice, spelling, reading comprehension, phonological sensitivity, and verbal ability and scored better on exception word reading. Chinese readers also used rhyme-based analogies to read nonwords derived from high-frequency exception words just as often as did these children. As predicted, Phoenician and Chinese readers adopted somewhat different strategies in reading ambiguous nonwords constructed by analogy to high-frequency exception words. Phoenician readers were more likely than Chinese readers to read ambiguous monosyllabic nonwords via context-free grapheme-phoneme correspondences and were less likely to read disyllabic nonwords by analogy to high-frequency analogues. Although the Chinese reading style was more common than the Phoenician style in normally achieving fourth graders, there were similar numbers of poor readers with phonological dyslexia (identifying nonwords significantly more accurately than exception words) and surface dyslexia (showing the reverse pattern), although surface dyslexia was more common in the severely disabled readers. However, few of the poor readers showed pure patterns of phonological or surface dyslexia.

The Potential That Electronic Nicotine Delivery Systems Can be a Disruptive Technology: Results From a National Survey.

PubMed

Pechacek, Terry F; Nayak, Pratibha; Gregory, Kyle R; Weaver, Scott R; Eriksen, Michael P

2016-10-01

This study evaluates the reasons for use and acceptance of Electronic Nicotine Delivery Systems (ENDS) among current and former cigarette smokers to assess if ENDS may become a satisfying alternative to cigarettes. Data are from a national probability sample of 5717 US adults, surveyed June-November 2014. The survey contained questions on awareness, usage, and reasons for use of traditional and novel tobacco products. The analytic sample was current and former smokers who ever used ENDS (n = 729) and was divided into four mutually exclusive categories. Among the 585 current smokers, 337 were no longer using ENDS ("E-Cig Rejecters"), and 248 were continuing to use both ENDS and cigarettes ("E-Cig Dual Users"). Among 144 former cigarette smokers, 101 were non-recent users of ENDS ("Quit All Products"), and 43 were continuing to use ENDS exclusively ("Switchers"). Former smokers (the "Switchers") report finding ENDS a satisfying alternative to regular cigarettes, with only 15.8% (95% confidence interval [CI] 4.4-27.1) rating ENDS as less enjoyable than regular cigarettes. However, greater than fivefold more current smokers did not find them satisfying and stopped using them (77.3%; 95% CI 72.1-82.4 of "E-Cig Rejecters" rated ENDS as less enjoyable). Being less harmful was the most highly rated reason for continuing to use ENDS among "Switchers." Most (80.9%) "Switchers" reported that ENDS helped them quit cigarettes. Since many current smokers who have tried ENDS reject them as a satisfying alternative to regular cigarettes, ENDS will not replace regular cigarettes unless they improve. Since about one-half of recent former smokers are trying ENDS with about one-fourth continuing to use them, and many reporting that these products have helped them quit regular cigarettes, the potential impact of ENDS on population quit rates deserves continued surveillance. However, since most current smokers who have tried ENDS reject them as a satisfying alternative to regular cigarettes, the potential of ENDS becoming a disruptive technology replacing regular cigarettes remains uncertain. ENDS need to improve as a satisfying alternative or the attractiveness and appeal of the regular cigarette must be degraded to increase the potential of ENDS replacing regular cigarettes. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco.

The Potential That Electronic Nicotine Delivery Systems Can be a Disruptive Technology: Results From a National Survey

PubMed Central

Nayak, Pratibha; Gregory, Kyle R.; Weaver, Scott R.; Eriksen, Michael P.

2016-01-01

Introduction: This study evaluates the reasons for use and acceptance of Electronic Nicotine Delivery Systems (ENDS) among current and former cigarette smokers to assess if ENDS may become a satisfying alternative to cigarettes. Methods: Data are from a national probability sample of 5717 US adults, surveyed June–November 2014. The survey contained questions on awareness, usage, and reasons for use of traditional and novel tobacco products. The analytic sample was current and former smokers who ever used ENDS (n = 729) and was divided into four mutually exclusive categories. Among the 585 current smokers, 337 were no longer using ENDS (“E-Cig Rejecters”), and 248 were continuing to use both ENDS and cigarettes (“E-Cig Dual Users”). Among 144 former cigarette smokers, 101 were non-recent users of ENDS (“Quit All Products”), and 43 were continuing to use ENDS exclusively (“Switchers”). Results: Former smokers (the “Switchers”) report finding ENDS a satisfying alternative to regular cigarettes, with only 15.8% (95% confidence interval [CI] 4.4–27.1) rating ENDS as less enjoyable than regular cigarettes. However, greater than fivefold more current smokers did not find them satisfying and stopped using them (77.3%; 95% CI 72.1–82.4 of “E-Cig Rejecters” rated ENDS as less enjoyable). Being less harmful was the most highly rated reason for continuing to use ENDS among “Switchers.” Most (80.9%) “Switchers” reported that ENDS helped them quit cigarettes. Conclusion: Since many current smokers who have tried ENDS reject them as a satisfying alternative to regular cigarettes, ENDS will not replace regular cigarettes unless they improve. Implications: Since about one-half of recent former smokers are trying ENDS with about one-fourth continuing to use them, and many reporting that these products have helped them quit regular cigarettes, the potential impact of ENDS on population quit rates deserves continued surveillance. However, since most current smokers who have tried ENDS reject them as a satisfying alternative to regular cigarettes, the potential of ENDS becoming a disruptive technology replacing regular cigarettes remains uncertain. ENDS need to improve as a satisfying alternative or the attractiveness and appeal of the regular cigarette must be degraded to increase the potential of ENDS replacing regular cigarettes. PMID:27142201

Developing ShakeCast statistical fragility analysis framework for rapid post-earthquake assessment

USGS Publications Warehouse

Lin, K.-W.; Wald, D.J.

2012-01-01

When an earthquake occurs, the U. S. Geological Survey (USGS) ShakeMap estimates the extent of potentially damaging shaking and provides overall information regarding the affected areas. The USGS ShakeCast system is a freely-available, post-earthquake situational awareness application that automatically retrieves earthquake shaking data from ShakeMap, compares intensity measures against users’ facilities, sends notifications of potential damage to responsible parties, and generates facility damage assessment maps and other web-based products for emergency managers and responders. We describe notable improvements of the ShakeMap and the ShakeCast applications. We present a design for comprehensive fragility implementation, integrating spatially-varying ground-motion uncertainties into fragility curves for ShakeCast operations. For each facility, an overall inspection priority (or damage assessment) is assigned on the basis of combined component-based fragility curves using pre-defined logic. While regular ShakeCast users receive overall inspection priority designations for each facility, engineers can access the full fragility analyses for further evaluation.

Risk and protective behaviours for residential carbon monoxide poisoning

PubMed Central

Rupert, Douglas J; Poehlman, Jon A; Damon, Scott A; Williams, Peyton N

2015-01-01

Background Unintentional, non-fire-related carbon monoxide (CO) poisoning is a leading cause of poisoning death and injury in the USA. Residential poisonings caused by faulty furnaces are the most common type of CO exposure. However, these poisonings are largely preventable with annual furnace inspections and CO alarm installation. Objective This study aimed to identify the knowledge, attitudes and beliefs that might lead consumers to adopt these protective behaviours. Methods In August 2009, four focus groups (n=29) were conducted with homeowners in Chicago, Illinois, USA, to identify the knowledge, attitudes and beliefs that lead consumers to adopt risk and protective behaviours. Discussions were transcribed and the findings were analysed using an ordered meta-matrix. Results Focus group participants were aware of CO poisoning and supported the idea of regular furnace inspections. However, few participants consistently scheduled professional inspections for fear of costly repairs and unscrupulous contractors. Participants often owned CO alarms, but many did not locate them properly, nor maintain them. Some participants confused CO and natural gas and were unsure how to react if a CO alarm sounds. Participants stated that incentives, such as discounts and inspector selection tips, would make them more likely to schedule furnace inspections. Participants also identified trustworthy sources for CO education, including realtors, fire departments, home insurance agents and local media outlets. Conclusions Participants’ residential CO risk behaviours are not random but driven by underlying knowledge, attitudes and beliefs. Correcting misperceptions, providing incentives and partnering with trustworthy sources might encourage greater consumer adoption of protective behaviours. PMID:22653781

The Association between Noncommercial Partnerships and Risk of HIV among Female Sex Workers: Evidences from a Cross-Sectional Behavioral and Biological Survey in Southern India

PubMed Central

Somanath, Renuka Pulikallu; Mishra, Ram Manohar; Saggurti, Niranjan; Parimi, Prabhakar

2013-01-01

This paper examines the association between female sex workers' (FSWs) noncommercial partnerships with risk of HIV in Andhra Pradesh, India. Data were drawn from a cross-sectional behavioral and biological survey conducted in 2009 among 3225 FSWs from Andhra Pradesh. Participants were asked about their sexual partnerships, condom use, and vulnerability factors and tested for HIV and sexually transmitted infections. The key independent variables considered were presence of a noncommercial sexual partner (no, yes) and the nature of such partnerships (regular, nonregular). FSWs who reported husband as noncommercial partner were considered to have a regular partner, while the rest were defined as having nonregular partners. Adjusted odds ratios (OR) and 95% confidence intervals (CI) were estimated to measure the associations between variables of interest. Almost three-fourths (74.8%) of FSWs reported having noncommercial partners (regular: 55.6%; nonregular: 19.3%). FSWs in nonregular partnerships were more likely to be HIV positive (13.1% versus 10.9%, adjusted OR: 1.4, 95% CI: 1.1–1.8), have syphilis (10.3% versus 4.2%, adjusted OR: 2.3, 95% CI: 1.6–3.3), use condoms inconsistently with occasional clients (21.0% versus 16.5%, adjusted OR: 1.5, 95% CI: 1.2–1.9), and report forced sex (25.1% versus 14.1%, adjusted OR: 1.9, 95% CI: 1.5–2.4) as compared to those in regular partnerships. HIV prevention programs need to emphasize safe sex behaviors, particularly among FSWs who have nonregular partners. PMID:23533729

Operationalisation of service quality in household waste collection.

PubMed

Schulte, Nico Alexander; Gellenbeck, Klaus; Nelles, Michael

2017-04-01

Since 2007, there has been intensive discussion at European and national levels concerning the standardisation of services including those in the sector of waste management. The drafts of the European standard prEN 16250 and the German preliminary standard DIN SPEC 1108 are intended to establish a uniform definition of corresponding services and their (minimum) service levels. Their binding application in practice requires that systematic inspections be provided to ascertain to what degree a service has been carried out as agreed upon. However, both standardisation projects give only a few examples of potential quality characteristics and offer no concrete information concerning methods of measurement. Because intersectoral or cross-service quality inspections do not exist, there is a need for the development of specific quality inspections. The study introduced in this article examines the question of how the service quality of door-to-door waste collection can be systematically measured. To this end, the quality concept applied to the process of waste collection was first concretised and then operationalised using indicators. Based upon this, the methods of the quality inspections were developed and subjected to a trial of their applicability in a German waste management company. The methods for measuring and evaluating take into account, in addition to the different boundary conditions of collection, also the possible customer influence on the collection process and consequently on the service performed by the collection crew. In order to avoid time- and therefore cost-intensive exhaustive surveys, a multilevel random-controlled selection of survey units was developed, too. Based on the analysis of the measurement data, it was possible to determine specific time requirement values for the regular performance of the data surveys, as well as minimum sample sizes as a function of the number of container locations of the waste collection tours. On the basis of this information, it has been possible to make initial statements concerning the personnel requirement for quality inspections. Moreover, it is possible to make recommendations concerning the daily working-time schedule for a quality manager in order to achieve the most efficient performance of quality inspections possible. Copyright © 2017 Elsevier Ltd. All rights reserved.

STS-92 Mission Specialist Wisoff has his launch and entry suit adjusted

NASA Technical Reports Server (NTRS)

2000-01-01

During pre-pack and fit check in the Operations and Checkout Building, STS-92 Mission Specialist Peter J.K. 'Jeff' Wisoff tries on his boots. Wisoff and the rest of the crew are at KSC for Terminal Countdown Demonstration Test activities. The TCDT provides emergency egress training, simulated countdown exercises and opportunities to inspect the mission payload. This mission will be Wisoff's fourth Shuttle flight. STS-92 is scheduled to launch Oct. 5 at 9:38 p.m. EDT from Launch Pad 39A on the fifth flight to the International Space Station. It will carry two elements of the Space Station, the Integrated Truss Structure Z1 and the third Pressurized Mating Adapter. The mission is also the 100th flight in the Shuttle program.

STS-96 FD Highlights and Crew Activities Report: Flight Day 04

NASA Technical Reports Server (NTRS)

1999-01-01

On this fourth day of the STS-96 Discovery mission, the flight crew, Commander Kent V. Rominger, Pilot Rick D. Husband, and Mission Specialists Ellen Ochoa, Tamara E. Jernigan, Daniel T. Barry, Julie Payette, and Valery Ivanovich Tokarev are seen performing final preparations for their space walk. Views of the crew helping Barry and Jernigan suit up for their mission is also presented. Ochoa uses the robot arm to maneuver Jernigan up to the space station module. During the space walk Barry and Jernigan move two cranes, and three bags containing handrails and tools to the outside of the Unity module. They also install a thermal cover on a Unity trunnion pin, inspect peeling paint on Zarya and one of the two Early Communications System antennas on Unity.

Prevalence of Dental Erosion among the Young Regular Swimmers in Kaunas, Lithuania.

PubMed

Zebrauskas, Andrius; Birskute, Ruta; Maciulskiene, Vita

2014-04-01

To determine prevalence of dental erosion among competitive swimmers in Kaunas, the second largest city in Lithuania. The study was designed as a cross-sectional survey, with a questionnaire and clinical examination protocols. The participants were 12 - 25 year-old swimmers regularly practicing in the swimming pools of Kaunas. Of the total of 132 participants there were 76 (12 - 17 year-old) and 56 (18 - 25 year-old) individuals; in Groups 1 and 2, respectively. Participants were examined for dental erosion, using a portable dental unit equipped with fibre-optic light, compressed air and suction, and standard dental instruments for oral inspection. Lussi index was applied for recording dental erosion. The completed questionnaires focused on the common erosion risk factors were returned by all participants. Dental erosion was found in 25% of the 12 - 17 year-olds, and in 50% of 18 - 25 years-olds. Mean value of the surfaces with erosion was 6.31 (SD 4.37). All eroded surfaces were evaluated as grade 1. Swimming training duration and the participants' age correlated positively (Kendall correlation, r = 0.65, P < 0.001), meaning that older swimmers had practiced for longer period. No significant correlation between occurrence of dental erosion and the analyzed risk factors (gastroesophageal reflux disease, frequent vomiting, dry mouth, regular intake of acidic medicines, carbonated drinks) was found in both study groups. Prevalence of dental erosion of very low degree was high among the regular swimmers in Kaunas, and was significantly related to swimmers' age.

The implementation of a quality assurance procedure for the Veterinary Services of France.

PubMed

Gerster, F; Guerson, N; Moreau, V; Mulnet, O; Provot, S; Salabert, C

2003-08-01

Due to the increasing complexity of food production systems and the concerns that these systems raise, there has been increasing demand from the general public for more State control of these processes. In France, it is the official Veterinary Services who are responsible for food safety and who must respond to these demands. The Veterinary Service is formulating a quality assurance procedure in accordance with standard EN 45004-ISO 17020, which determines the requirements that inspection bodies must follow to be recognised, at national, European and international level, as competent and reliable. As part of this procedure, the Veterinary Service will review requirements in terms of organisation, functions, qualifications and resources. The progress of inspection service orders, from their conception by the Central Administration, to their implementation by decentralised services, must be carefully managed. It is essential that service orders be implemented effectively and systematically by using recognised methods and issuing adequate inspection reports. The training and qualifications of inspectors are very important: their skills must remain up-to-date so that there is always a network of qualified staff, that is, staff who have an understanding of production processes and who have recognised competences in terms of initial training, continuous professional development and adequate experience. The quality systems implemented will only meet expectations if they are continuously monitored by means of regular evaluations. For this reason, both internal and external audits are performed. These new practices contribute to establishing a basis for the improvement of internal evaluation. In order to facilitate the implementation of a quality assurance procedure for inspection services, several tools, that are linked with the information system of the government department responsible for food, are, or will be, at the disposal of the decentralised Veterinary Services, i.e. a national database, mail and service order processing software, and inspection procedures.

Decision support methodology to establish priorities on the inspection of structures

NASA Astrophysics Data System (ADS)

Cortes, V. Juliette; Sterlacchini, Simone; Bogaard, Thom; Frigerio, Simone; Schenato, Luca; Pasuto, Alessandro

2014-05-01

For hydro-meteorological hazards in mountain areas, the regular inspection of check dams and bridges is important due to the effect of their functional status on water-sediment processes. Moreover, the inspection of these structures is time consuming for organizations due to their extensive number in many regions. However, trained citizen-volunteers can support civil protection and technical services in the frequency, timeliness and coverage of monitoring the functional status of hydraulic structures. Technicians should evaluate and validate these reports to get an index for the status of the structure. Thus, preventive actions could initiate such as the cleaning of obstructions or to pre-screen potential problems for a second level inspection. This study proposes a decision support methodology that technicians can use to assess an index for three parameters representing the functional status of the structure: a) condition of the structure at the opening of the stream flow, b) level of obstruction at the structure and c) the level of erosion in the stream bank. The calculation of the index for each parameter is based upon fuzzy logic theory to handle ranges in precision of the reports and to convert the linguistic rating scales into numbers representing the structure's status. A weighting method and multi-criteria method (Analytic Hierarchy Process- AHP and TOPSIS), can be used by technicians to combine the different ratings according to the component elements of the structure and the completeness of the reports. Finally, technicians can set decision rules based on the worst rating and a threshold for the functional indexes. The methodology was implemented as a prototype web-based tool to be tested with technicians of the Civil Protection in the Fella basin, Northern Italy. Results at this stage comprise the design and implementation of the web-based tool with GIS interaction to evaluate available reports and to set priorities on the inspection of structures. Keywords Decision-making, Multi-criteria methods, Torrent control structures, Web-based tools.

Optimal secondary source position in exterior spherical acoustical holophony

NASA Astrophysics Data System (ADS)

Pasqual, A. M.; Martin, V.

2012-02-01

Exterior spherical acoustical holophony is a branch of spatial audio reproduction that deals with the rendering of a given free-field radiation pattern (the primary field) by using a compact spherical loudspeaker array (the secondary source). More precisely, the primary field is known on a spherical surface surrounding the primary and secondary sources and, since the acoustic fields are described in spherical coordinates, they are naturally subjected to spherical harmonic analysis. Besides, the inverse problem of deriving optimal driving signals from a known primary field is ill-posed because the secondary source cannot radiate high-order spherical harmonics efficiently, especially in the low-frequency range. As a consequence, a standard least-squares solution will overload the transducers if the primary field contains such harmonics. Here, this is avoided by discarding the strongly decaying spherical waves, which are identified through inspection of the radiation efficiency curves of the secondary source. However, such an unavoidable regularization procedure increases the least-squares error, which also depends on the position of the secondary source. This paper deals with the above-mentioned questions in the context of far-field directivity reproduction at low and medium frequencies. In particular, an optimal secondary source position is sought, which leads to the lowest reproduction error in the least-squares sense without overloading the transducers. In order to address this issue, a regularization quality factor is introduced to evaluate the amount of regularization required. It is shown that the optimal position improves significantly the holophonic reconstruction and maximizes the regularization quality factor (minimizes the amount of regularization), which is the main general contribution of this paper. Therefore, this factor can also be used as a cost function to obtain the optimal secondary source position.

On the modeling and nonlinear dynamics of autonomous Silva-Young type chaotic oscillators with flat power spectrum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kengne, Jacques; Kenmogne, Fabien

2014-12-15

The nonlinear dynamics of fourth-order Silva-Young type chaotic oscillators with flat power spectrum recently introduced by Tamaseviciute and collaborators is considered. In this type of oscillators, a pair of semiconductor diodes in an anti-parallel connection acts as the nonlinear component necessary for generating chaotic oscillations. Based on the Shockley diode equation and an appropriate selection of the state variables, a smooth mathematical model (involving hyperbolic sine and cosine functions) is derived for a better description of both the regular and chaotic dynamics of the system. The complex behavior of the oscillator is characterized in terms of its parameters by usingmore » time series, bifurcation diagrams, Lyapunov exponents' plots, Poincaré sections, and frequency spectra. It is shown that the onset of chaos is achieved via the classical period-doubling and symmetry restoring crisis scenarios. Some PSPICE simulations of the nonlinear dynamics of the oscillator are presented in order to confirm the ability of the proposed mathematical model to accurately describe/predict both the regular and chaotic behaviors of the oscillator.« less

[Comparative analysis of clustered regularly interspaced short palindromic repeats (CRISPRs) loci in the genomes of halophilic archaea].

PubMed

Zhang, Fan; Zhang, Bing; Xiang, Hua; Hu, Songnian

2009-11-01

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) is a widespread system that provides acquired resistance against phages in bacteria and archaea. Here we aim to genome-widely analyze the CRISPR in extreme halophilic archaea, of which the whole genome sequences are available at present time. We used bioinformatics methods including alignment, conservation analysis, GC content and RNA structure prediction to analyze the CRISPR structures of 7 haloarchaeal genomes. We identified the CRISPR structures in 5 halophilic archaea and revealed a conserved palindromic motif in the flanking regions of these CRISPR structures. In addition, we found that the repeat sequences of large CRISPR structures in halophilic archaea were greatly conserved, and two types of predicted RNA secondary structures derived from the repeat sequences were likely determined by the fourth base of the repeat sequence. Our results support the proposal that the leader sequence may function as recognition site by having palindromic structures in flanking regions, and the stem-loop secondary structure formed by repeat sequences may function in mediating the interaction between foreign genetic elements and CAS-encoded proteins.

The validated hypoallergenic cosmetics rating system: its 30-year evolution and effect on the prevalence of cosmetic reactions.

PubMed

Verallo-Rowell, Vermén M

2011-01-01

The validated hypoallergenic (vh) rating system was initiated in 1988 to try to objectively validate the "hypoallergenic" claim in cosmetics. To show how the system rates cosmetic hypoallergenicity and to compare the prevalence of cosmetic contact dermatitis (CCD) among users of regular cosmetics versus cosmetics with high VH numbers. (1) Made a VH list based on top allergens from patch-test results published by the North American Contact Dermatitis Group (NACDG) and the European Surveillance System on Contact Allergies (ESSCA); (2) reviewed global regulatory, cosmetic, drug, packaging, and manufacturing practices to show how allergens may contaminate products; (3) compared cosmetic ingredients lists against the VH list to obtain the VH rating (the more allergens absent, the higher the VH rating); and (4) obtained CCD prevalence among users of regular cosmetics versus users of cosmetics with high VH ratings. (1) Two VH lists (1988, 2003) included only cosmetic allergens in the NACDG surveys, the third (2007) included cosmetic and potential contaminant noncosmetic allergens, and the fourth (2010) adds ESSCA patch-test surveys. (2) CCD prevalence is 0.05 to 0.12% (average, 0.08%) among users of cosmetics with high VH ratings versus 2.4 to 36.3% among users of regular cosmetics. The VH rating system is shown to objectively validate the hypoallergenic cosmetics claim.

Patient satisfaction with maxillofacial prosthesis. Literature review.

PubMed

Goiato, Marcelo Coelho; Pesqueira, Aldiéris Alves; Ramos da Silva, Cristina; Gennari Filho, Humberto; Micheline Dos Santos, Daniela

2009-02-01

Obturators and facial prostheses are important not only in rehabilitation and aesthetics, but also in patient re-socialisation. The level of reintegration is directly related to the degree of satisfaction with rehabilitation. So, the maxillofacial prosthetics must provide patient satisfaction during treatment. This study aimed to search information in database and conduct a literature review on patient satisfaction with maxillofacial prosthesis. The problems experienced by these patients may decrease when specialists keep the patient on regular inspection. Rehabilitation through alloplasty or prosthetic restoration provides satisfactory conditions in aesthetics and well-being and reinstates individuals in familial and social environment.

CONCENTRATION OF NATURAL RADIONUCLIDES IN PRIVATE DRINKING WATER WELLS.

PubMed

Cerny, R; Otahal, P; Merta, J; Burian, I

2017-11-01

Water is one of the most important resources for a human being; therefore, its quality should be properly tested. According to Council Directive No. 2013/51/EUROATOM, there shall be established requirements for the general public health protection with regard to radioactive substances in water intended for human consumption. This article summarises measurement results of selected water samples at 444 private drinking water wells, which are not subject to regular inspection in terms of the Czech legislation. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Anisotropic modeling and joint-MAP stitching for improved ultrasound model-based iterative reconstruction of large and thick specimens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Almansouri, Hani; Venkatakrishnan, Singanallur V.; Clayton, Dwight A.

One-sided non-destructive evaluation (NDE) is widely used to inspect materials, such as concrete structures in nuclear power plants (NPP). A widely used method for one-sided NDE is the synthetic aperture focusing technique (SAFT). The SAFT algorithm produces reasonable results when inspecting simple structures. However, for complex structures, such as heavily reinforced thick concrete structures, SAFT results in artifacts and hence there is a need for a more sophisticated inversion technique. Model-based iterative reconstruction (MBIR) algorithms, which are typically equivalent to regularized inversion techniques, offer a powerful framework to incorporate complex models for the physics, detector miscalibrations and the materials beingmore » imaged to obtain high quality reconstructions. Previously, we have proposed an ultrasonic MBIR method that signifcantly improves reconstruction quality compared to SAFT. However, the method made some simplifying assumptions on the propagation model and did not disucss ways to handle data that is obtained by raster scanning a system over a surface to inspect large regions. In this paper, we propose a novel MBIR algorithm that incorporates an anisotropic forward model and allows for the joint processing of data obtained from a system that raster scans a large surface. We demonstrate that the new MBIR method can produce dramatic improvements in reconstruction quality compared to SAFT and suppresses articfacts compared to the perviously presented MBIR approach.« less

Fatal occupational accidents in Danish fishing vessels 1989-2005.

PubMed

Laursen, Lise H; Hansen, Henrik L; Jensen, Olaf C

2008-06-01

The purpose of the study was to study the circumstances and incidence rates of fatal accidents in inspection obligated and non-inspection obligated Danish fishing vessels to identify areas for prevention. Information about the fatalities came from maritime authority reports, including vessel disaster reports, post mortem reports, maritime inquiries and police reports. The person- and vessel years at risk came from the Danish Directorate of Fisheries. During the period 1989-2005, 114 fatalities occurred. Sixty-one of the fatalities occurred in 36 vessel disasters mainly caused by foundering/capsizing due to stability changes in rough weather and collisions; 39 fatal occupational accidents mainly occurred on the larger inspection obligated trawlers during fishing. In the remaining 14 other fatal accidents, the main causal factors were difficult embarking/disembarking conditions by darkness in foreign ports and alcohol intoxication. In the period 1995-2005, the overall incidence rate was 10 per 10,000 fishermen per year with no down-going trend during that period. The fatal accident rates are still too high, despite the efforts to reduce the risk. Increased focus on regular and repeated safety training for all fishermen and improved safety measures are needed, especially in the underscored areas of sea disasters concerning small vessels and occupational accidents on big vessels. Better registration of time at risk for fishermen is needed to validate the effect of the safety measures.

Anisotropic modeling and joint-MAP stitching for improved ultrasound model-based iterative reconstruction of large and thick specimens

NASA Astrophysics Data System (ADS)

Almansouri, Hani; Venkatakrishnan, Singanallur; Clayton, Dwight; Polsky, Yarom; Bouman, Charles; Santos-Villalobos, Hector

2018-04-01

One-sided non-destructive evaluation (NDE) is widely used to inspect materials, such as concrete structures in nuclear power plants (NPP). A widely used method for one-sided NDE is the synthetic aperture focusing technique (SAFT). The SAFT algorithm produces reasonable results when inspecting simple structures. However, for complex structures, such as heavily reinforced thick concrete structures, SAFT results in artifacts and hence there is a need for a more sophisticated inversion technique. Model-based iterative reconstruction (MBIR) algorithms, which are typically equivalent to regularized inversion techniques, offer a powerful framework to incorporate complex models for the physics, detector miscalibrations and the materials being imaged to obtain high quality reconstructions. Previously, we have proposed an ultrasonic MBIR method that signifcantly improves reconstruction quality compared to SAFT. However, the method made some simplifying assumptions on the propagation model and did not disucss ways to handle data that is obtained by raster scanning a system over a surface to inspect large regions. In this paper, we propose a novel MBIR algorithm that incorporates an anisotropic forward model and allows for the joint processing of data obtained from a system that raster scans a large surface. We demonstrate that the new MBIR method can produce dramatic improvements in reconstruction quality compared to SAFT and suppresses articfacts compared to the perviously presented MBIR approach.

MO-DE-207A-02: A Feature-Preserving Image Reconstruction Method for Improved Pancreaticlesion Classification in Diagnostic CT Imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, J; Tsui, B; Noo, F

Purpose: To develop a feature-preserving model based image reconstruction (MBIR) method that improves performance in pancreatic lesion classification at equal or reduced radiation dose. Methods: A set of pancreatic lesion models was created with both benign and premalignant lesion types. These two classes of lesions are distinguished by their fine internal structures; their delineation is therefore crucial to the task of pancreatic lesion classification. To reduce image noise while preserving the features of the lesions, we developed a MBIR method with curvature-based regularization. The novel regularization encourages formation of smooth surfaces that model both the exterior shape and the internalmore » features of pancreatic lesions. Given that the curvature depends on the unknown image, image reconstruction or denoising becomes a non-convex optimization problem; to address this issue an iterative-reweighting scheme was used to calculate and update the curvature using the image from the previous iteration. Evaluation was carried out with insertion of the lesion models into the pancreas of a patient CT image. Results: Visual inspection was used to compare conventional TV regularization with our curvature-based regularization. Several penalty-strengths were considered for TV regularization, all of which resulted in erasing portions of the septation (thin partition) in a premalignant lesion. At matched noise variance (50% noise reduction in the patient stomach region), the connectivity of the septation was well preserved using the proposed curvature-based method. Conclusion: The curvature-based regularization is able to reduce image noise while simultaneously preserving the lesion features. This method could potentially improve task performance for pancreatic lesion classification at equal or reduced radiation dose. The result is of high significance for longitudinal surveillance studies of patients with pancreatic cysts, which may develop into pancreatic cancer. The Senior Author receives financial support from Siemens GmbH Healthcare.« less

Ambiguity-free completion of the equations of motion of compact binary systems at the fourth post-Newtonian order

NASA Astrophysics Data System (ADS)

Marchand, Tanguy; Bernard, Laura; Blanchet, Luc; Faye, Guillaume

2018-02-01

We present the first complete (i.e., ambiguity-free) derivation of the equations of motion of two nonspinning compact objects up to the 4PN (post-Newtonian) order, based on the Fokker action of point particles in harmonic coordinates. The last ambiguity parameter is determined from first principle, by resorting to a matching between the near-zone and far-zone fields, and a consistent computation of the 4PN tail effect in d dimensions. Dimensional regularization is used throughout for treating IR divergences appearing at 4PN order, as well as UV divergences due to the modeling of the compact objects as point particles.

Increasing reticle inspection efficiency and reducing wafer printchecks at 14nm using automated defect classification and simulation

NASA Astrophysics Data System (ADS)

Paracha, Shazad; Goodman, Eliot; Eynon, Benjamin G.; Noyes, Ben F.; Ha, Steven; Kim, Jong-Min; Lee, Dong-Seok; Lee, Dong-Heok; Cho, Sang-Soo; Ham, Young M.; Vacca, Anthony D.; Fiekowsky, Peter J.; Fiekowsky, Daniel I.

2014-10-01

IC fabs inspect critical masks on a regular basis to ensure high wafer yields. These requalification inspections are costly for many reasons including the capital equipment, system maintenance, and labor costs. In addition, masks typically remain in the "requal" phase for extended, non-productive periods of time. The overall "requal" cycle time in which reticles remain non-productive is challenging to control. Shipping schedules can slip when wafer lots are put on hold until the master critical layer reticle is returned to production. Unfortunately, substituting backup critical layer reticles can significantly reduce an otherwise tightly controlled process window adversely affecting wafer yields. One major requal cycle time component is the disposition process of mask inspections containing hundreds of defects. Not only is precious non-productive time extended by reviewing hundreds of potentially yield-limiting detections, each additional classification increases the risk of manual review techniques accidentally passing real yield limiting defects. Even assuming all defects of interest are flagged by operators, how can any person's judgment be confident regarding lithographic impact of such defects? The time reticles spend away from scanners combined with potential yield loss due to lithographic uncertainty presents significant cycle time loss and increased production costs An automatic defect analysis system (ADAS), which has been in fab production for numerous years, has been improved to handle the new challenges of 14nm node automate reticle defect classification by simulating each defect's printability under the intended illumination conditions. In this study, we have created programmed defects on a production 14nm node critical-layer reticle. These defects have been analyzed with lithographic simulation software and compared to the results of both AIMS optical simulation and to actual wafer prints.

Local food protection and safety infrastructure and capacity: a Maryland case study.

PubMed

Kufel, Joanna Zablotsky; Resnick, Beth A; Fox, Mary; Frattaroli, Shannon; Gielen, Andrea; Burke, Thomas A

2011-01-01

In Maryland, county Food Protection Programs (FPP), housed within Environmental Public Health (EPH) Divisions, maintain responsibility for regular inspection of all food service facilities (FSF). With growing concerns about how our food supply is protected, it is important to determine the state and effectiveness of our food safety systems. This research elucidates the roles, responsibilities, strengths, and weaknesses of Food Safety and Protection Programs in Maryland. A 16-question survey tool, which addressed facets of the local food protection infrastructure, including FSF inspections, staffing, budget, and foodborne illness surveillance, was distributed to all 24 county FPP. The number of FSF in Maryland increased 97% from 2001 to 2006 and counties had an average inspection completion rate of 73%, with a 4% increase over the time period. Statewide, there were 4.1 EPH full-time employees (FTE) per 10 000 population and 1.6 FPP FTE per 10 000 population. EPH Division budgets increased 63% statewide, from $19.5 million in 2000 to $31.9 million in 2007. FPP budgets also increased 59% over the period, from $6.2 million in 2000 to $9.8 million in 2007. This study offers new quantitative measures of the demands, capacities, and performance of Food Protection and Safety Programs in Maryland. This assessment of local EPH and FPP capacity also offers insight into the strengths and weaknesses of the local food protection and safety infrastructure. Importantly, it reveals an infrastructure and dedicated food protection workforce that inspects the food supply and responds to foodborne illness outbreaks. Yet, resources vary substantially from county to county, impacting which services can be provided and how well they can be performed. This can, in turn, impact the potential risk of foodborne illness and the public's overall health.

Using Twitter to Identify and Respond to Food Poisoning: The Food Safety STL Project.

PubMed

Harris, Jenine K; Hawkins, Jared B; Nguyen, Leila; Nsoesie, Elaine O; Tuli, Gaurav; Mansour, Raed; Brownstein, John S

Foodborne illness affects 1 in 4 US residents each year. Few of those sickened seek medical care or report the illness to public health authorities, complicating prevention efforts. Citizens who report illness identify food establishments with more serious and critical violations than found by regular inspections. New media sources, including online restaurant reviews and social media postings, have the potential to improve reporting. We implemented a Web-based Dashboard (HealthMap Foodborne Dashboard) to identify and respond to tweets about food poisoning from St Louis City residents. This report examines the performance of the Dashboard in its first 7 months after implementation in the City of St Louis Department of Health. We examined the number of relevant tweets captured and replied to, the number of foodborne illness reports received as a result of the new process, and the results of restaurant inspections following each report. In its first 7 months (October 2015-May 2016), the Dashboard captured 193 relevant tweets. Our replies to relevant tweets resulted in more filed reports than several previously existing foodborne illness reporting mechanisms in St Louis during the same time frame. The proportion of restaurants with food safety violations was not statistically different (P = .60) in restaurants inspected after reports from the Dashboard compared with those inspected following reports through other mechanisms. The Dashboard differs from other citizen engagement mechanisms in its use of current data, allowing direct interaction with constituents on issues when relevant to the constituent to provide time-sensitive education and mobilizing information. In doing so, the Dashboard technology has potential for improving foodborne illness reporting and can be implemented in other areas to improve response to public health issues such as suicidality, spread of Zika virus infection, and hospital quality.

Oceanic Sharks Clean at Coastal Seamount

PubMed Central

Oliver, Simon P.; Hussey, Nigel E.; Turner, John R.; Beckett, Alison J.

2011-01-01

Interactions between pelagic thresher sharks (Alopias pelagicus) and cleaner wrasse were investigated at a seamount in the Philippines. Cleaning associations between sharks and teleosts are poorly understood, but the observable interactions seen at this site may explain why these mainly oceanic sharks regularly venture into shallow coastal waters where they are vulnerable to disturbance from human activity. From 1,230 hours of observations recorded by remote video camera between July 2005 and December 2009, 97 cleaner-thresher shark events were analyzed, 19 of which were interrupted. Observations of pelagic thresher sharks interacting with cleaners at the seamount were recorded at all times of day but their frequency declined gradually from morning until evening. Cleaners showed preferences for foraging on specific areas of a thresher shark's body. For all events combined, cleaners were observed to conduct 2,757 inspections, of which 33.9% took place on the shark's pelvis, 23.3% on the pectoral fins, 22.3% on the caudal fin, 8.6% on the body, 8.3% on the head, 2.1% on the dorsal fin, and 1.5% on the gills respectively. Cleaners did not preferentially inspect thresher sharks by time of day or by shark sex, but there was a direct correlation between the amount of time a thresher shark spent at a cleaning station and the number of inspections it received. Thresher shark clients modified their behavior by “circular-stance-swimming,” presumably to facilitate cleaner inspections. The cleaner-thresher shark association reflected some of the known behavioral trends in the cleaner-reef teleost system since cleaners appeared to forage selectively on shark clients. Evidence is mounting that in addition to acting as social refuges and foraging grounds for large visiting marine predators, seamounts may also support pelagic ecology by functioning as cleaning stations for oceanic sharks and rays. PMID:21423796

An Apparatus to Quantify Anteroposterior and Mediolateral Shear Reduction in Shoe Insoles

PubMed Central

Belmont, Barry; Wang, Yancheng; Ammanath, Peethambaran; Wrobel, James S.; Shih, Albert

2013-01-01

Background Many of the physiological changes that lead to diabetic foot ulceration, such as muscle atrophy and skin hardening, are manifested at the foot–ground interface via pressure and shear points. Novel shear-reducing insoles have been developed, but their magnitude of shear stiffness has not yet been compared with regular insoles. The aim of this study was to develop an apparatus that would apply shear force and displacement to an insole’s forefoot region, reliably measure deformation, and calculate insole shear stiffness. Methods An apparatus consisting of suspended weights was designed to test the forefoot region of insoles. Three separate regions representing the hallux; the first and second metatarsals; and the third, fourth, and fifth metatarsals were sheared at 20 mm/min for displacements from 0.1 to 1.0 mm in both the anteroposterior and mediolateral directions for two types of insoles (regular and shear reducing). Results Shear reduction was found to be significant for the intervention insoles under all testing conditions. The ratio of a regular insole’s effective stiffness and the experimental insole’s effective stiffness across forefoot position versus shear direction, gait instance versus shear direction, and forefoot position versus gait instance was 270% ± 79%, 270% ± 96%, and 270% ± 86%, respectively. The apparatus was reliable with an average measured coefficient of variation of 0.034 and 0.069 for the regular and shear-reducing insole, respectively. Conclusions An apparatus consisting of suspended weights resting atop three locations of interest sheared across an insole was demonstrated to be capable of measuring the insole shear stiffness accurately, thus quantifying shear-reducing effects of a new type of insole. PMID:23567000

Athlete Information Sources About Dietary Supplements: A Review of Extant Research.

PubMed

Denham, Bryan E

2017-08-01

In the United States, the Dietary Supplement Health and Education Act of 1994 (DSHEA) classified dietary supplements as a subcategory of food, exempting manufacturers from providing premarket evidence of product safety and efficacy. Under DSHEA, agencies such as the U.S. Food and Drug Administration (FDA) cannot inspect supplements until after the products have entered the marketplace. Recognizing that both limited resources and DSHEA prevent the FDA from conducting broad-based inspections on a regular basis, disreputable manufacturers have spiked products with drugs such as anabolic steroids and amphetamines. With contaminated supplements now causing athletes to fail drug tests and, in some instances, threatening public health, it becomes important to examine sources of supplement information. This article reviews 53 studies that have addressed athlete information sources about dietary supplements. It finds that athletes, in general, rely heavily on coaches and trainers as well as friends and family for information. Relative to U.S. athletes, those competing internationally appear more likely to seek information from a physician or nutritionist. The article offers recommendations for individuals and organizations based on the most frequent information sources identified by athletes.

Using volcano plots and regularized-chi statistics in genetic association studies.

PubMed

Li, Wentian; Freudenberg, Jan; Suh, Young Ju; Yang, Yaning

2014-02-01

Labor intensive experiments are typically required to identify the causal disease variants from a list of disease associated variants in the genome. For designing such experiments, candidate variants are ranked by their strength of genetic association with the disease. However, the two commonly used measures of genetic association, the odds-ratio (OR) and p-value may rank variants in different order. To integrate these two measures into a single analysis, here we transfer the volcano plot methodology from gene expression analysis to genetic association studies. In its original setting, volcano plots are scatter plots of fold-change and t-test statistic (or -log of the p-value), with the latter being more sensitive to sample size. In genetic association studies, the OR and Pearson's chi-square statistic (or equivalently its square root, chi; or the standardized log(OR)) can be analogously used in a volcano plot, allowing for their visual inspection. Moreover, the geometric interpretation of these plots leads to an intuitive method for filtering results by a combination of both OR and chi-square statistic, which we term "regularized-chi". This method selects associated markers by a smooth curve in the volcano plot instead of the right-angled lines which corresponds to independent cutoffs for OR and chi-square statistic. The regularized-chi incorporates relatively more signals from variants with lower minor-allele-frequencies than chi-square test statistic. As rare variants tend to have stronger functional effects, regularized-chi is better suited to the task of prioritization of candidate genes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Electrical failure debug using interlayer profiling method

NASA Astrophysics Data System (ADS)

Yang, Thomas; Shen, Yang; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh

2017-03-01

It is very well known that as technology nodes move to smaller sizes, the number of design rules increases while design structures become more regular and the process manufacturing steps have increased as well. Normal inspection tools can only monitor hard failures on a single layer. For electrical failures that happen due to inter layers misalignments, we can only detect them through testing. This paper will present a working flow for using pattern analysis interlayer profiling techniques to turn multiple layer physical info into group linked parameter values. Using this data analysis flow combined with an electrical model allows us to find critical regions on a layout for yield learning.

Biomedical waste management: study on the awareness and practice among healthcare workers in a tertiary teaching hospital.

PubMed

Joseph, L; Paul, H; Premkumar, J; Paul, R; Michael, J S

2015-01-01

Bio-medical waste has a higher potential of infection and injury to the healthcare worker, patient and the surrounding community. Awareness programmes on their proper handling and management to healthcare workers can prevent the spread of infectious diseases and epidemics. This study was conducted in a tertiary care hospital to assess the impact of training, audits and education/implementations from 2009 to 2012 on awareness and practice of biomedical waste segregation. Our study reveals focused training, strict supervision, daily surveillance, audits inspections, involvement of hospital administrators and regular appraisals are essential to optimise the segregation of biomedical waste.

A No-Notice Drill of Hospital Preparedness in Responding to Ebola Virus Disease in Taiwan.

PubMed

Hsu, Shih-Min; Chien, Li-Jung; Tseng, Shu-Hui; Kuo, Steve H S

2015-01-01

The Ebola virus was first discovered in 1976, but the outbreak of Ebola virus disease that began in Guinea, West Africa, in December 2013 shocked the world. It is the largest and most severe epidemic of Ebola virus disease to date. The US Centers for Disease Control and Prevention confirmed that inadequate implementation of the policy of acquiring travel history led to a delay in identifying the first imported Ebola virus disease case. The Taiwan Centers for Disease Control developed a no-notice drill that used a simulated patient to assess hospitals' emergency preparedness capacity in responding to Ebola virus disease. Despite the fact that regular inspection shows that more than 90% of regional hospitals and medical centers inquired about patients' travel history, occupation, contact history, and cluster information, the no-notice drill revealed that more than 40% of regional hospitals and medical centers failed to ask emergency room patients about these factors. Therefore, to assist in inquiries about travel history, occupation, contact history, and cluster information in emergency triage and outpatient settings, the Taiwan CDC revised the criteria for hospital infection control inspection. It requested that hospitals issue appropriate reminders and implement process control mechanisms to block diagnostic processes in instances in which healthcare workers do not inquire about travel history, occupation, contact history, and cluster information. Furthermore, the Taiwan CDC will continue no-notice inspections in order to strengthen hospitals' infection control measures and reduce the risk of infectious disease transmission in the healthcare system.

Thermodynamic inspection of concrete using a controlled heat source

NASA Astrophysics Data System (ADS)

Milne, James M.

1990-10-01

Concrete is not quite such a non-destructable material as many are led to believe. It can deteriorate with time due to changes in the chemistry, the effect of moisture penetration and the corrosion of reinforcing steel bars. Much of this damage occurs relatively close to the surface, sometimes revealed by discolourations or the presence of cracks and sometimes as spallation when the corrosion products of steel cause delamination of the near surface concrete. These effects may occur in good quality concrete but their severity and rapidity of onset may be enhanced by fabrication defects when aggregates may not be to specification or the packing conditions cause porosity. It may thus be months or even years afterwards that these defects come to light. As a consequence a new industry has been formed to inspect concrete structures which may include X-ray equipment, linac accelerators, gamma isotope sources, ultrasonics, radar and of course thermography. Each of these nethods will have their own particular attractive features and merits. But most of these activities tend to be used more as a "fire fighting" service than as one ensuring regular maintenance of critical structures or even as quality control of structures during building. Quite often it seems that Non-destructive Testing is turned into a litigation service for dissatisfied customers and thermography is no stranger to this topic. It is heartening to see that the ASTM organisation in the USA and British Standards are encouraging and developing suitable standards for the inspection of concrete by thermographic techniques.

RZA-NLMF algorithm-based adaptive sparse sensing for realizing compressive sensing

NASA Astrophysics Data System (ADS)

Gui, Guan; Xu, Li; Adachi, Fumiyuki

2014-12-01

Nonlinear sparse sensing (NSS) techniques have been adopted for realizing compressive sensing in many applications such as radar imaging. Unlike the NSS, in this paper, we propose an adaptive sparse sensing (ASS) approach using the reweighted zero-attracting normalized least mean fourth (RZA-NLMF) algorithm which depends on several given parameters, i.e., reweighted factor, regularization parameter, and initial step size. First, based on the independent assumption, Cramer-Rao lower bound (CRLB) is derived as for the performance comparisons. In addition, reweighted factor selection method is proposed for achieving robust estimation performance. Finally, to verify the algorithm, Monte Carlo-based computer simulations are given to show that the ASS achieves much better mean square error (MSE) performance than the NSS.

Stethoscope Hygiene: Practice and Attitude of Medical Students

PubMed Central

Gazibara, Tatjana; Radovanovic, Sanja; Maric, Gorica; Rancic, Biljana; Kisic-Tepavcevic, Darija; Pekmezovic, Tatjana

2015-01-01

Objective The purpose of this study was to evaluate the frequency and attitude of medical students towards cleaning their stethoscopes. Subjects and Methods A cross-sectional study was carried out in the first week of December 2013. The study included 771 students (397 in their fourth and 374 in their sixth year) from the Faculty of Medicine, University of Belgrade, Serbia. An anonymous questionnaire was distributed to students before the start of compulsory lessons in classrooms. Results 317 of the 397 fourth-year students (79.8%) and 306 of the 374 sixth-year students (81.9%) cleaned their stethoscope. The stethoscope diaphragm was most commonly cleaned, while the flexible tubing was the least commonly cleaned area, mainly using ethyl alcohol-based agents. The strongest positive attitude was observed for the statement ‘It is important that my stethoscope is clean’ (4.3 out of 5.0). A positive correlation (Spearman's ρ = 0.105) was observed between a higher frequency of cleaning and the stronger positive notion that a stethoscope should be cleaned. Conclusion A considerably high proportion of the students studied had ever cleaned their stethoscopes. Based on the students' responses, it would be useful to implement instructions on stethoscope hygiene in the regular practical curriculum with the aim of applying stethoscope disinfection in daily work. PMID:26202790

Stethoscope Hygiene: Practice and Attitude of Medical Students.

PubMed

Gazibara, Tatjana; Radovanovic, Sanja; Maric, Gorica; Rancic, Biljana; Kisic-Tepavcevic, Darija; Pekmezovic, Tatjana

2015-01-01

The purpose of this study was to evaluate the frequency and attitude of medical students towards cleaning their stethoscopes. A cross-sectional study was carried out in the first week of December 2013. The study included 771 students (397 in their fourth and 374 in their sixth year) from the Faculty of Medicine, University of Belgrade, Serbia. An anonymous questionnaire was distributed to students before the start of compulsory lessons in classrooms. 317 of the 397 fourth-year students (79.8%) and 306 of the 374 sixth-year students (81.9%) cleaned their stethoscope. The stethoscope diaphragm was most commonly cleaned, while the flexible tubing was the least commonly cleaned area, mainly using ethyl alcohol-based agents. The strongest positive attitude was observed for the statement 'It is important that my stethoscope is clean' (4.3 out of 5.0). A positive correlation (Spearman's x03C1; = 0.105) was observed between a higher frequency of cleaning and the stronger positive notion that a stethoscope should be cleaned. A considerably high proportion of the students studied had ever cleaned their stethoscopes. Based on the students' responses, it would be useful to implement instructions on stethoscope hygiene in the regular practical curriculum with the aim of applying stethoscope disinfection in daily work. © 2015 S. Karger AG, Basel.

Quality and extent of locum tenens coverage in pediatric surgical practices.

PubMed

Nolan, Tracy L; Kandel, Jessica J; Nakayama, Don K

2015-04-01

The prevalence and quality of locum tenens coverage in pediatric surgery have not been determined. An Internet-based survey of American Pediatric Surgical Association members was conducted: 1) practice description; 2) use and frequency of locum tenens coverage; 4) whether the surgeon provided such coverage; and 5) Likert scale responses (strongly disagree, disagree, neutral, agree, strongly agree) to statements addressing its acceptability and quality (two × five contingency table and χ(2) analyses, significance at P < 0.05). Three hundred sixteen of 1163 members (27.2% response rate) responded. One-fourth (24.1%) used a locum tenens regularly. Reasons were long-term inability to recruit a full-time surgeon (35.2%) and short-term vacancies (32.4%). One-fifth (20.4%) did locum tenens work; one-fourth (27.0%) plan to do so in the future. Two-thirds (64.2%) believe that surgical care in a locum tenens situation does not provide the same level of care as a full-time community-based surgeon. Most support locum tenens for short-term coverage (87.3%) and recruitment problems (72.1%), but not long-term vacancies (38.8%; P < 0.001) or permanent coverage (27.0%; P < 0.001). locum tenens coverage is an established feature of pediatric surgery. Most view it as a stopgap solution to the surgical workforce shortage.

Accurate solution of the Poisson equation with discontinuities

NASA Astrophysics Data System (ADS)

Nave, Jean-Christophe; Marques, Alexandre; Rosales, Rodolfo

2017-11-01

Solving the Poisson equation in the presence of discontinuities is of great importance in many applications of science and engineering. In many cases, the discontinuities are caused by interfaces between different media, such as in multiphase flows. These interfaces are themselves solutions to differential equations, and can assume complex configurations. For this reason, it is convenient to embed the interface into a regular triangulation or Cartesian grid and solve the Poisson equation in this regular domain. We present an extension of the Correction Function Method (CFM), which was developed to solve the Poisson equation in the context of embedded interfaces. The distinctive feature of the CFM is that it uses partial differential equations to construct smooth extensions of the solution in the vicinity of interfaces. A consequence of this approach is that it can achieve high order of accuracy while maintaining compact discretizations. The extension we present removes the restrictions of the original CFM, and yields a method that can solve the Poisson equation when discontinuities are present in the solution, the coefficients of the equation (material properties), and the source term. We show results computed to fourth order of accuracy in two and three dimensions. This work was partially funded by DARPA, NSF, and NSERC.

The Replicator Equation on Graphs

PubMed Central

Ohtsuki, Hisashi; Nowak, Martin A.

2008-01-01

We study evolutionary games on graphs. Each player is represented by a vertex of the graph. The edges denote who meets whom. A player can use any one of n strategies. Players obtain a payoff from interaction with all their immediate neighbors. We consider three different update rules, called ‘birth-death’, ‘death-birth’ and ‘imitation’. A fourth update rule, ‘pairwise comparison’, is shown to be equivalent to birth-death updating in our model. We use pair-approximation to describe the evolutionary game dynamics on regular graphs of degree k. In the limit of weak selection, we can derive a differential equation which describes how the average frequency of each strategy on the graph changes over time. Remarkably, this equation is a replicator equation with a transformed payoff matrix. Therefore, moving a game from a well-mixed population (the complete graph) onto a regular graph simply results in a transformation of the payoff matrix. The new payoff matrix is the sum of the original payoff matrix plus another matrix, which describes the local competition of strategies. We discuss the application of our theory to four particular examples, the Prisoner’s Dilemma, the Snow-Drift game, a coordination game and the Rock-Scissors-Paper game. PMID:16860343

[Waste management in hospitals. Current situation in the state of North Rhine-Westphalia].

PubMed

Popp, W; Hansen, D; Hilgenhöner, M; Grandek, M; Heinemann, A; Blättler, T

2009-07-01

In 20 hospitals in North Rhine-Westphalia in-plant handling wastes and the delivery of the waste to the disposer were examined. Deficits were seen regarding risk assessment and operating instructions, support by company doctors, personal protection equipment, and break areas for the waste collecting personnel. Also the qualification of the waste management officer and his/her time contingent, correct declaration of the wastes, the training of the waste collecting personnel, the cleaning of multi-use containers and transportation vehicles, storage of the wastes at the collecting points, and the use of sharp collecting boxes were to be partly criticized. Consequences and recommendations are given, concerning the company's obligations (e.g., provide risk assessment, operating instructions), waste management officer (e.g., qualification, enough time contingent, regular inspections), waste collecting personnel (e.g., training courses), industrial safety (e.g., protection equipment, break area wash places), company doctors, transportation vehicles in the house (e.g., regular cleaning), one-way collectors (e.g., labelling at the site of the collection), multi-use collectors (e.g., cleaning), and compressing containers (e.g., larger maintenance openings).

Failure Analysis in Platelet Molded Composite Systems

NASA Astrophysics Data System (ADS)

Kravchenko, Sergii G.

Long-fiber discontinuous composite systems in the form of chopped prepreg tapes provide an advanced, structural grade, molding compound allowing for fabrication of complex three-dimensional components. Understanding of process-structure-property relationship is essential for application of prerpeg platelet molded components, especially because of their possible irregular disordered heterogeneous morphology. Herein, a structure-property relationship was analyzed in the composite systems of many platelets. Regular and irregular morphologies were considered. Platelet-based systems with more ordered morphology possess superior mechanical performance. While regular morphologies allow for a careful inspection of failure mechanisms derived from the morphological characteristics, irregular morphologies are representative of the composite architectures resulting from uncontrolled deposition and molding with chopped prerpegs. Progressive failure analysis (PFA) was used to study the damaged deformation up to ultimate failure in a platelet-based composite system. Computational damage mechanics approaches were utilized to conduct the PFA. The developed computational models granted understanding of how the composite structure details, meaning the platelet geometry and system morphology (geometrical arrangement and orientation distribution of platelets), define the effective mechanical properties of a platelet-molded composite system, its stiffness, strength and variability in properties.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lenie, Koen; Mulier, Guido; Vandorpe, Marc

Safe decontamination is a regular requirement in the lifecycle of a nuclear plant and is integral to the careful maintenance of any nuclear installation for 4 key reasons: - To decrease the risk of radioactive contamination spreading; - To limit the radioactive doses contracted by maintenance personnel; - To limit the radioactive doses incurred during decommissioning; - To downgrade the class of radioactive waste The primary goal of decommissioning is to remove aged and/or contaminated and/or activated components of an installation, safely and securely, in as short a time as possible. There are several reasons why this may be necessary:more » - To eliminate the risk of radioactive contamination spreading; - To eliminate the risk of radiation; - To downgrade a site or a circuit to a point where it no longer is submitted to regular inspection; - To remove installations or parts that are no longer in service or have aged There are many different D and D techniques, tools and materials available today. What is important is knowing how best to use them. This paper describes the experiences and the future projects of Tecnubel in D and D projects in Belgium and abroad. (authors)« less

Image restoration for civil engineering structure monitoring using imaging system embedded on UAV

NASA Astrophysics Data System (ADS)

Vozel, Benoit; Dumoulin, Jean; Chehdi, Kacem

2013-04-01

Nowadays, civil engineering structures are periodically surveyed by qualified technicians (i.e. alpinist) operating visual inspection using heavy mechanical pods. This method is far to be safe, not only for civil engineering structures monitoring staff, but also for users. Due to the unceasing traffic increase, making diversions or closing lanes on bridge becomes more and more difficult. New inspection methods have to be found. One of the most promising technique is to develop inspection method using images acquired by a dedicated monitoring system operating around the civil engineering structures, without disturbing the traffic. In that context, the use of images acquired with an UAV, which fly around the structures is of particular interest. The UAV can be equipped with different vision system (digital camera, infrared sensor, video, etc.). Nonetheless, detection of small distresses on images (like cracks of 1 mm or less) depends on image quality, which is sensitive to internal parameters of the UAV (vibration modes, video exposure times, etc.) and to external parameters (turbulence, bad illumination of the scene, etc.). Though progresses were made at UAV level and at sensor level (i.e. optics), image deterioration is still an open problem. These deteriorations are mainly represented by motion blur that can be coupled with out-of-focus blur and observation noise on acquired images. In practice, deteriorations are unknown if no a priori information is available or dedicated additional instrumentation is set-up at UAV level. Image restoration processing is therefore required. This is a difficult problem [1-3] which has been intensively studied over last decades [4-12]. Image restoration can be addressed by following a blind approach or a myopic one. In both cases, it includes two processing steps that can be implemented in sequential or alternate mode. The first step carries out the identification of the blur impulse response and the second one makes use of this estimated blur kernel for performing the deconvolution of the acquired image. In the present work, different regularization methods, mainly based on the pseudo norm aforementioned Total Variation, are studied and analysed. The key point of their respective implementation, their properties and limits are investigated in this particular applicative context. References [1] J. Hadamard. Lectures on Cauchy's problem in linear partial differential equations. Yale University Press, 1923. [2] A. N. Tihonov. On the resolution of incorrectly posed problems and regularisation method (in Russian). Doklady A. N.SSSR, 151(3), 1963. [3] C. R. Vogel. Computational Methods for inverse problems, SIAM, 2002. [4] A. K. Katsaggelos, J. Biemond, R.W. Schafer, and R. M. Mersereau, "A regularized iterative image restoration algorithm," IEEE Transactions on Signal Processing, vol.39, no. 4, pp. 914-929, 1991. [5] J. Biemond, R. L. Lagendijk, and R. M. Mersereau, "Iterative methods for image deblurring," Proceedings of the IEEE, vol. 78, no. 5, pp. 856-883, 1990. [6] D. Kundur and D. Hatzinakos, "Blind image deconvolution," IEEE Signal Processing Magazine, vol. 13, no. 3, pp. 43-64, 1996. [7] Y. L. You and M. Kaveh, "A regularization approach to joint blur identification and image restoration," IEEE Transactions on Image Processing, vol. 5, no. 3, pp. 416-428, 1996. [8] T. F. Chan and C. K. Wong, "Total variation blind deconvolution," IEEE Transactions on Image Processing, vol. 7, no. 3, pp. 370-375, 1998. [9] S. Chardon, B. Vozel, and K. Chehdi. Parametric Blur Estimation Using the GCV Criterion and a Smoothness Constraint on the Image. Multidimensional Systems and Signal Processing Journal, Kluwer Ed., 10:395-414, 1999 [10] B. Vozel, K. Chehdi, and J. Dumoulin. Myopic image restoration for civil structures inspection using UAV (in French). In GRETSI, 2005. [11] L. Bar, N. Sochen, and N. Kiryati. Semi-blind image restoration via Mumford-Shah regularization. IEEE Transactions on Image Processing, 15(2), 2006. [12] J. H. Money and S. H. Kang, "Total variation minimizing blind deconvolution with shock filter reference," Image and Vision Computing, vol. 26, no. 2, pp. 302-314, 2008.

Adaptive texture filtering for defect inspection in ultrasound images

NASA Astrophysics Data System (ADS)

Zmola, Carl; Segal, Andrew C.; Lovewell, Brian; Nash, Charles

1993-05-01

The use of ultrasonic imaging to analyze defects and characterize materials is critical in the development of non-destructive testing and non-destructive evaluation (NDT/NDE) tools for manufacturing. To develop better quality control and reliability in the manufacturing environment advanced image processing techniques are useful. For example, through the use of texture filtering on ultrasound images, we have been able to filter characteristic textures from highly-textured C-scan images of materials. The materials have highly regular characteristic textures which are of the same resolution and dynamic range as other important features within the image. By applying texture filters and adaptively modifying their filter response, we have examined a family of filters for removing these textures.

Material characterization and defect inspection in ultrasound images

NASA Astrophysics Data System (ADS)

Zmola, Carl; Segal, Andrew C.; Lovewell, Brian; Mahdavieh, Jacob; Ross, Joseph; Nash, Charles

1992-08-01

The use of ultrasonic imaging to analyze defects and characterize materials is critical in the development of non-destructive testing and non-destructive evaluation (NDT/NDE) tools for manufacturing. To develop better quality control and reliability in the manufacturing environment advanced image processing techniques are useful. For example, through the use of texture filtering on ultrasound images, we have been able to filter characteristic textures from highly textured C-scan images of materials. The materials have highly regular characteristic textures which are of the same resolution and dynamic range as other important features within the image. By applying texture filters and adaptively modifying their filter response, we have examined a family of filters for removing these textures.

Non-destructive evaluation of laminated composite plates using dielectrometry sensors

NASA Astrophysics Data System (ADS)

Nassr, Amr A.; El-Dakhakhni, Wael W.

2009-05-01

The use of composite materials in marine, aerospace and automotive applications is increasing; however, several kinds of damages of composite materials may influence its durability and future applications. In this paper, a methodology was presented for damage detection of laminated composite plates using dielectrometry sensors. The presence of damage in the laminated composite plate leads to changes in its dielectric characteristics, causing variation in the measured capacitance by the sensors. An analytical model was used to analyse the influence of different sensor parameters on the output signals and to optimize sensor design. Two-dimensional finite element (FE) simulations were performed to assess the validity of the analytical results and to evaluate other sensor design-related parameters. To experimentally verify the model, the dielectric permittivity of the composite plate was measured. In addition, a glass fibre reinforced polymer (GFRP) laminated plate containing pre-fabricated slots through its thickness to simulate delamination and water intrusion defects was inspected in a laboratory setting. Excellent agreements were found between the experimental capacitance response signals and those predicated from the FE simulations. This cost-effective technique can be used for rapid damage screening, regular scheduled inspection, or as a permanent sensor network within the composite system.

Interactive Volumetry Of Liver Ablation Zones.

PubMed

Egger, Jan; Busse, Harald; Brandmaier, Philipp; Seider, Daniel; Gawlitza, Matthias; Strocka, Steffen; Voglreiter, Philip; Dokter, Mark; Hofmann, Michael; Kainz, Bernhard; Hann, Alexander; Chen, Xiaojun; Alhonnoro, Tuomas; Pollari, Mika; Schmalstieg, Dieter; Moche, Michael

2015-10-20

Percutaneous radiofrequency ablation (RFA) is a minimally invasive technique that destroys cancer cells by heat. The heat results from focusing energy in the radiofrequency spectrum through a needle. Amongst others, this can enable the treatment of patients who are not eligible for an open surgery. However, the possibility of recurrent liver cancer due to incomplete ablation of the tumor makes post-interventional monitoring via regular follow-up scans mandatory. These scans have to be carefully inspected for any conspicuousness. Within this study, the RF ablation zones from twelve post-interventional CT acquisitions have been segmented semi-automatically to support the visual inspection. An interactive, graph-based contouring approach, which prefers spherically shaped regions, has been applied. For the quantitative and qualitative analysis of the algorithm's results, manual slice-by-slice segmentations produced by clinical experts have been used as the gold standard (which have also been compared among each other). As evaluation metric for the statistical validation, the Dice Similarity Coefficient (DSC) has been calculated. The results show that the proposed tool provides lesion segmentation with sufficient accuracy much faster than manual segmentation. The visual feedback and interactivity make the proposed tool well suitable for the clinical workflow.

Interactive Volumetry Of Liver Ablation Zones

PubMed Central

Egger, Jan; Busse, Harald; Brandmaier, Philipp; Seider, Daniel; Gawlitza, Matthias; Strocka, Steffen; Voglreiter, Philip; Dokter, Mark; Hofmann, Michael; Kainz, Bernhard; Hann, Alexander; Chen, Xiaojun; Alhonnoro, Tuomas; Pollari, Mika; Schmalstieg, Dieter; Moche, Michael

2015-01-01

Percutaneous radiofrequency ablation (RFA) is a minimally invasive technique that destroys cancer cells by heat. The heat results from focusing energy in the radiofrequency spectrum through a needle. Amongst others, this can enable the treatment of patients who are not eligible for an open surgery. However, the possibility of recurrent liver cancer due to incomplete ablation of the tumor makes post-interventional monitoring via regular follow-up scans mandatory. These scans have to be carefully inspected for any conspicuousness. Within this study, the RF ablation zones from twelve post-interventional CT acquisitions have been segmented semi-automatically to support the visual inspection. An interactive, graph-based contouring approach, which prefers spherically shaped regions, has been applied. For the quantitative and qualitative analysis of the algorithm’s results, manual slice-by-slice segmentations produced by clinical experts have been used as the gold standard (which have also been compared among each other). As evaluation metric for the statistical validation, the Dice Similarity Coefficient (DSC) has been calculated. The results show that the proposed tool provides lesion segmentation with sufficient accuracy much faster than manual segmentation. The visual feedback and interactivity make the proposed tool well suitable for the clinical workflow. PMID:26482818

Electrophysiological follow-up of patients with chronic peripheral neuropathy induced by occupational intoxication with n-hexane.

PubMed

Wang, Cheng; Chen, Shijiu; Wang, Zengtao

2014-09-01

The aim of this study is to characterize and dynamically monitor the progress of peripheral neuropathy induced by n-hexane by electromyography and nerve conduction velocity (NCV-EMG). Twenty-five patients with n-hexane poisoning from an electronic company were investigated in the year 2009. The occupational history of these workers was collected, and toxic substance exposure was identified. Neurologic inspection and regular NCV-EMG inspection were performed for all patients upon hospital admission and after 3, 6, and 12 months of treatment. NCV-EMG results shown that patients with n-hexane poisoning have simultaneous damage on motor and sensory nerves, of which sensory nerve damage was more severe. Motor nerves of the lower limbs were severe damaged than those of the upper limbs; whereas injury of sensory nerve in the upper limbs was more severe than that of the lower limbs. After treatment, clinical signs and symptoms of the patients were significantly improved. NCV-EMG result showed a delayed worsening at 3 months then gradually recovered after 12 months. Recovery of the motor nerve was better compared with sensory nerve, with upper limbs faster than that of the lower limbs.

Interactive Volumetry Of Liver Ablation Zones

NASA Astrophysics Data System (ADS)

Egger, Jan; Busse, Harald; Brandmaier, Philipp; Seider, Daniel; Gawlitza, Matthias; Strocka, Steffen; Voglreiter, Philip; Dokter, Mark; Hofmann, Michael; Kainz, Bernhard; Hann, Alexander; Chen, Xiaojun; Alhonnoro, Tuomas; Pollari, Mika; Schmalstieg, Dieter; Moche, Michael

2015-10-01

Percutaneous radiofrequency ablation (RFA) is a minimally invasive technique that destroys cancer cells by heat. The heat results from focusing energy in the radiofrequency spectrum through a needle. Amongst others, this can enable the treatment of patients who are not eligible for an open surgery. However, the possibility of recurrent liver cancer due to incomplete ablation of the tumor makes post-interventional monitoring via regular follow-up scans mandatory. These scans have to be carefully inspected for any conspicuousness. Within this study, the RF ablation zones from twelve post-interventional CT acquisitions have been segmented semi-automatically to support the visual inspection. An interactive, graph-based contouring approach, which prefers spherically shaped regions, has been applied. For the quantitative and qualitative analysis of the algorithm’s results, manual slice-by-slice segmentations produced by clinical experts have been used as the gold standard (which have also been compared among each other). As evaluation metric for the statistical validation, the Dice Similarity Coefficient (DSC) has been calculated. The results show that the proposed tool provides lesion segmentation with sufficient accuracy much faster than manual segmentation. The visual feedback and interactivity make the proposed tool well suitable for the clinical workflow.

Vision based tunnel inspection using non-rigid registration

NASA Astrophysics Data System (ADS)

Badshah, Amir; Ullah, Shan; Shahzad, Danish

2015-04-01

Growing numbers of long tunnels across the globe has increased the need for safety measurements and inspections of tunnels in these days. To avoid serious damages, tunnel inspection is highly recommended at regular intervals of time to find any deformations or cracks at the right time. While following the stringent safety and tunnel accessibility standards, conventional geodetic surveying using techniques of civil engineering and other manual and mechanical methods are time consuming and results in troublesome of routine life. An automatic tunnel inspection by image processing techniques using non rigid registration has been proposed. There are many other image processing methods used for image registration purposes. Most of the processes are operation of images in its spatial domain like finding edges and corners by Harris edge detection method. These methods are quite time consuming and fail for some or other reasons like for blurred or images with noise. Due to use of image features directly by these methods in the process, are known by the group, correlation by image features. The other method is featureless correlation, in which the images are converted into its frequency domain and then correlated with each other. The shift in spatial domain is the same as in frequency domain, but the processing is order faster than in spatial domain. In the proposed method modified normalized phase correlation has been used to find any shift between two images. As pre pre-processing the tunnel images i.e. reference and template are divided into small patches. All these relative patches are registered by the proposed modified normalized phase correlation. By the application of the proposed algorithm we get the pixel movement of the images. And then these pixels shifts are converted to measuring units like mm, cm etc. After the complete process if there is any shift in the tunnel at described points are located.

Using Twitter to Identify and Respond to Food Poisoning: The Food Safety STL Project

PubMed Central

Hawkins, Jared B.; Nguyen, Leila; Nsoesie, Elaine O.; Tuli, Gaurav; Mansour, Raed; Brownstein, John S.

2017-01-01

Context: Foodborne illness affects 1 in 4 US residents each year. Few of those sickened seek medical care or report the illness to public health authorities, complicating prevention efforts. Citizens who report illness identify food establishments with more serious and critical violations than found by regular inspections. New media sources, including online restaurant reviews and social media postings, have the potential to improve reporting. Objective: We implemented a Web-based Dashboard (HealthMap Foodborne Dashboard) to identify and respond to tweets about food poisoning from St Louis City residents. Design and Setting: This report examines the performance of the Dashboard in its first 7 months after implementation in the City of St Louis Department of Health. Main Outcome Measures: We examined the number of relevant tweets captured and replied to, the number of foodborne illness reports received as a result of the new process, and the results of restaurant inspections following each report. Results: In its first 7 months (October 2015-May 2016), the Dashboard captured 193 relevant tweets. Our replies to relevant tweets resulted in more filed reports than several previously existing foodborne illness reporting mechanisms in St Louis during the same time frame. The proportion of restaurants with food safety violations was not statistically different (P = .60) in restaurants inspected after reports from the Dashboard compared with those inspected following reports through other mechanisms. Conclusion: The Dashboard differs from other citizen engagement mechanisms in its use of current data, allowing direct interaction with constituents on issues when relevant to the constituent to provide time-sensitive education and mobilizing information. In doing so, the Dashboard technology has potential for improving foodborne illness reporting and can be implemented in other areas to improve response to public health issues such as suicidality, spread of Zika virus infection, and hospital quality. PMID:28166175

Mobile phone ownership and use among school children in three Hungarian cities.

PubMed

Mezei, Gabor; Benyi, Maria; Muller, Agnes

2007-05-01

In spite of rapid worldwide increase in mobile phone use and public concerns about associated potential health effects, little is known about patterns of mobile phone ownership and use in the general population and among children. In April 2005, we conducted a survey of mobile phone ownership and use among fourth grade school children in three Hungarian cities. From 24 schools, 1301 student filled out a short, self-administered questionnaire on basic demographics, mobile phone ownership, pattern of mobile phone use, and after-school activities. Overall, 989 students (76%) owned a mobile phone. Three hundred thirteen students (24%) used a mobile phone daily to make phone calls, and an additional 427 students (33%) used mobile phones for phone calls at least several times per week. Sixty-six students (5%) sent text messages daily and an additional 308 students (24%) sent text messages at least several times per week. Girls, children with no siblings, children who were members of a sport club, and children who played computer games daily were more likely to own and use mobile phones regularly. A higher number of socially disadvantaged children in a class predicted lower likelihood of regular mobile phone use among children. Our results suggest that mobile phone ownership and regular use is highly prevalent among school children in Hungary. Due to rapid changes in ownership patterns follow up surveys will be required to obtain information on temporal trends and changes in mobile phone ownership and pattern of use among school children. (c) 2007 Wiley-Liss, Inc.

The relationship between subjective wellbeing, low income and substance use among schoolchildren in the north west of England: a cross-sectional study.

PubMed

Farmer, Siobhan; Hanratty, Barbara

2012-12-01

The consumption of tobacco, alcohol and illegal drugs by young people is a public health concern. This study aimed to explore the associations between subjective wellbeing, living in a low-income household and substance use by schoolchildren. Data were analysed from a nationally representative cross-sectional survey of schoolchildren in England (Tellus4, 2009). Participants were 3903 children aged 10 and 15 years from two local authorities in the North West. Eligibility for free school meals provided a proxy for living in a low-income household. Multiple logistic regression was conducted with the main outcome measure, a composite indicator of self-reported regular substance use. More boys than girls had experimented with drugs or alcohol, but in the fourth year of secondary education, girls were significantly more likely than boys to have been drunk (P ≤ 0.001). In the multivariate analysis, older age was the most important factor associated with the consumption of substances. Living in a low-income household was associated with substance use, adjusting for age and subjective wellbeing (adj. OR = 1.78, 95% CI = 1.36-2.34). Respondents who reported being happy (adj. OR = 0.67, 95% CI = 0.52-0.86) or able to communicate with their family (adj. OR = 0.51, 95% CI = 0.39-0.65), were less likely to be regular users. Interventions to prevent regular substance use should be carefully targeted by age. Policies aimed at social determinants may be an important adjunct to individual-level interventions to reduce some inequalities in health associated with substance misuse.

Psychiatric Disorders in Outpatients With Borderline Intellectual Functioning: Comparison With Both Outpatients From Regular Mental Health Care and Outpatients With Mild Intellectual Disabilities

PubMed Central

Wieland, Jannelien; Haan, Sara Kapitein-de; Zitman, Frans G

2014-01-01

Objective: In the Netherlands, patients with borderline intellectual functioning are eligible for specialized mental health care. This offers the unique possibility to examine the mix of psychiatric disorders in patients who, in other countries, are treated in regular outpatient mental health care clinics. Our study sought to examine the rates of all main Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, Text Revision, Axis I psychiatric diagnoses in outpatients with borderline intellectual functioning of 2 specialized regional psychiatric outpatient departments and to compare these with rates of the same disorders in outpatients from regular mental health care (RMHC) and outpatients with mild intellectual disabilities (IDs). Method: Our study was a cross-sectional, anonymized medical chart review. All participants were patients from the Dutch regional mental health care provider Rivierduinen. Diagnoses of patients with borderline intellectual functioning (borderline intellectual functioning group; n = 235) were compared with diagnoses of patients from RMHC (RMHC group; n = 1026) and patients with mild ID (mild ID group; n = 152). Results: Compared with the RMHC group, psychotic and major depressive disorders were less common in the borderline intellectual functioning group, while posttraumatic stress disorder and V codes were more common. Compared with the mild ID group, psychotic disorders were significantly less common. Conclusion: Mental health problems in people with borderline intellectual functioning may not be well addressed in general psychiatry, or by standard psychiatry for patients with ID. Specific attention to this group in clinical practice and research may be warranted lest they fall between 2 stools. PMID:25007114

Psychiatric disorders in outpatients with borderline intellectual functioning: comparison with both outpatients from regular mental health care and outpatients with mild intellectual disabilities.

PubMed

Wieland, Jannelien; Kapitein-de Haan, Sara; Zitman, Frans G

2014-04-01

In the Netherlands, patients with borderline intellectual functioning are eligible for specialized mental health care. This offers the unique possibility to examine the mix of psychiatric disorders in patients who, in other countries, are treated in regular outpatient mental health care clinics. Our study sought to examine the rates of all main Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, Text Revision, Axis I psychiatric diagnoses in outpatients with borderline intellectual functioning of 2 specialized regional psychiatric outpatient departments and to compare these with rates of the same disorders in outpatients from regular mental health care (RMHC) and outpatients with mild intellectual disabilities (IDs). Our study was a cross-sectional, anonymized medical chart review. All participants were patients from the Dutch regional mental health care provider Rivierduinen. Diagnoses of patients with borderline intellectual functioning (borderline intellectual functioning group; n = 235) were compared with diagnoses of patients from RMHC (RMHC group; n = 1026) and patients with mild ID (mild ID group; n = 152). Compared with the RMHC group, psychotic and major depressive disorders were less common in the borderline intellectual functioning group, while posttraumatic stress disorder and V codes were more common. Compared with the mild ID group, psychotic disorders were significantly less common. Mental health problems in people with borderline intellectual functioning may not be well addressed in general psychiatry, or by standard psychiatry for patients with ID. Specific attention to this group in clinical practice and research may be warranted lest they fall between 2 stools.

Evaluation of the ADHD rating scale in youth with autism

PubMed Central

Yerys, Benjamin E.; Nissley-Tsiopinis, Jenelle; de Marchena, Ashley; Watkins, Marley W.; Antezana, Ligia; Power, Thomas J.; Schultz, Robert T.

2016-01-01

Scientists and clinicians regularly use clinical screening tools for attention deficit/hyperactivity disorder (ADHD) to assess comorbidity without empirical evidence that these measures are valid in youth with autism spectrum disorder (ASD). We examined the prevalence of youth meeting ADHD criteria on the ADHD rating scale fourth edition (ADHD-RS-IV), the relationship of ADHD-RS-IV ratings with participant characteristics and behaviors, and its underlying factor structure in 386 7-17 year olds with ASD without intellectual disability. Expected parent prevalence rates, relationships with age and externalizing behaviors were observed, but confirmatory factor analyses revealed unsatisfactory fits for one-, two-, three-factor models. Exploratory analyses revealed several items cross-loading on multiple factors. Implications of screening ADHD in youth with ASD using current diagnostic criteria are discussed. PMID:27738853

Playing Chemical Plant Environmental Protection Games with Historical Monitoring Data.

PubMed

Zhu, Zhengqiu; Chen, Bin; Reniers, Genserik; Zhang, Laobing; Qiu, Sihang; Qiu, Xiaogang

2017-09-29

The chemical industry is very important for the world economy and this industrial sector represents a substantial income source for developing countries. However, existing regulations on controlling atmospheric pollutants, and the enforcement of these regulations, often are insufficient in such countries. As a result, the deterioration of surrounding ecosystems and a quality decrease of the atmospheric environment can be observed. Previous works in this domain fail to generate executable and pragmatic solutions for inspection agencies due to practical challenges. In addressing these challenges, we introduce a so-called Chemical Plant Environment Protection Game (CPEP) to generate reasonable schedules of high-accuracy air quality monitoring stations (i.e., daily management plans) for inspection agencies. First, so-called Stackelberg Security Games (SSGs) in conjunction with source estimation methods are applied into this research. Second, high-accuracy air quality monitoring stations as well as gas sensor modules are modeled in the CPEP game. Third, simplified data analysis on the regularly discharging of chemical plants is utilized to construct the CPEP game. Finally, an illustrative case study is used to investigate the effectiveness of the CPEP game, and a realistic case study is conducted to illustrate how the models and algorithms being proposed in this paper, work in daily practice. Results show that playing a CPEP game can reduce operational costs of high-accuracy air quality monitoring stations. Moreover, evidence suggests that playing the game leads to more compliance from the chemical plants towards the inspection agencies. Therefore, the CPEP game is able to assist the environmental protection authorities in daily management work and reduce the potential risks of gaseous pollutants dispersion incidents.

Acceptance, Benefits, and Challenges of Public Health-Oriented Pet Business Regulations in King County, Washington.

PubMed

Wierenga, Janelle; Thiede, Hanne; Helms, Leah; Hopkins, Sharon

2016-01-01

New regulations were implemented in King County, Washington, in 2010 requiring pet businesses to obtain a permit from Public Health-Seattle & King County (Public Health) and undergo annual inspections to provide education and ensure compliance with regulatory standards. The regulations were developed as a tool for zoonotic disease control and prevention education for businesses and their customers, as well as for environmental protection. To assess the acceptance, benefits, and challenges of the new regulations and identify ways for Public Health to improve educational efforts and assist businesses with compliance. Cross-sectional survey. King County, Washington. Pet businesses with Public Health permits in 2013. Self-administered survey responses. The response rate was 40.5%. The majority of respondents provided grooming, pet day care, and kennel/boarding services from small, independent businesses. Sixty-one percent reported Public Health inspections as beneficial, especially concerning disinfection procedures and using an infection control plan. Almost three-fourths of respondents used the Public Health template to develop the infection control plan. Forty-four percent reported using the educational materials provided by Public Health, and 62% used educational materials from other sources. Most respondents reported that they gained benefits from the pet business permit, although fewer agreed that they obtained a good value from the permit and fee. The most common benefits reported were protection of animal and human health and establishing the credibility of the pet business. Major challenges with the implementation of the pet business regulations were not generally reported by respondents. Most respondents reported a collaborative relationship between Public Health and the pet businesses. Improvements in infection control practices and positive responses to the inspections were reported by pet businesses. Survey results were used to improve infection control plan templates, increase the use of educational materials, and improve the Web site and business portal performance.

Robust approximate optimal guidance strategies for aeroassisted orbital transfer missions

NASA Astrophysics Data System (ADS)

Ilgen, Marc R.

This thesis presents the application of game theoretic and regular perturbation methods to the problem of determining robust approximate optimal guidance laws for aeroassisted orbital transfer missions with atmospheric density and navigated state uncertainties. The optimal guidance problem is reformulated as a differential game problem with the guidance law designer and Nature as opposing players. The resulting equations comprise the necessary conditions for the optimal closed loop guidance strategy in the presence of worst case parameter variations. While these equations are nonlinear and cannot be solved analytically, the presence of a small parameter in the equations of motion allows the method of regular perturbations to be used to solve the equations approximately. This thesis is divided into five parts. The first part introduces the class of problems to be considered and presents results of previous research. The second part then presents explicit semianalytical guidance law techniques for the aerodynamically dominated region of flight. These guidance techniques are applied to unconstrained and control constrained aeroassisted plane change missions and Mars aerocapture missions, all subject to significant atmospheric density variations. The third part presents a guidance technique for aeroassisted orbital transfer problems in the gravitationally dominated region of flight. Regular perturbations are used to design an implicit guidance technique similar to the second variation technique but that removes the need for numerically computing an optimal trajectory prior to flight. This methodology is then applied to a set of aeroassisted inclination change missions. In the fourth part, the explicit regular perturbation solution technique is extended to include the class of guidance laws with partial state information. This methodology is then applied to an aeroassisted plane change mission using inertial measurements and subject to uncertainties in the initial value of the flight path angle. A summary of performance results for all these guidance laws is presented in the fifth part of this thesis along with recommendations for further research.

Visual and Quantitative Analysis Methods of Respiratory Patterns for Respiratory Gated PET/CT.

PubMed

Son, Hye Joo; Jeong, Young Jin; Yoon, Hyun Jin; Park, Jong-Hwan; Kang, Do-Young

2016-01-01

We integrated visual and quantitative methods for analyzing the stability of respiration using four methods: phase space diagrams, Fourier spectra, Poincaré maps, and Lyapunov exponents. Respiratory patterns of 139 patients were grouped based on the combination of the regularity of amplitude, period, and baseline positions. Visual grading was done by inspecting the shape of diagram and classified into two states: regular and irregular. Quantitation was done by measuring standard deviation of x and v coordinates of Poincaré map (SD x , SD v ) or the height of the fundamental peak ( A 1 ) in Fourier spectrum or calculating the difference between maximal upward and downward drift. Each group showed characteristic pattern on visual analysis. There was difference of quantitative parameters (SD x , SD v , A 1 , and MUD-MDD) among four groups (one way ANOVA, p = 0.0001 for MUD-MDD, SD x , and SD v , p = 0.0002 for A 1 ). In ROC analysis, the cutoff values were 0.11 for SD x (AUC: 0.982, p < 0.0001), 0.062 for SD v (AUC: 0.847, p < 0.0001), 0.117 for A 1 (AUC: 0.876, p < 0.0001), and 0.349 for MUD-MDD (AUC: 0.948, p < 0.0001). This is the first study to analyze multiple aspects of respiration using various mathematical constructs and provides quantitative indices of respiratory stability and determining quantitative cutoff value for differentiating regular and irregular respiration.

Evaluation of mentorship programme in nursing education: a pilot study in Turkey.

PubMed

Bulut, Hülya; Hisar, Filiz; Demir, Sevil Güler

2010-11-01

Mentorships increase the students' confidence, help ease the difficulties associated with their new environment and reality, increase self-esteem and help socialize students into the nursing role. The main objective of the programme was to support mentee students in facilitating their transition to the university and nursing. This descriptive, exploratory study was designed using Maslow's hierarchy of needs and a pre/post test Rotter's locus of control. Sixty-two (62) first-year students and fifty-eight (58) fourth-year students were eligible to be in the mentoring programme. Mentors and mentees contacted each other weekly as required to provide information and support. Nursing lecturers were available to support the mentors for regular contact over the 13 weeks of the programme. The data were collected by questionnaire for the first-year and fourth-year students. In addition, in order to determine the efficacy of the mentoring programme, Rotter's Locus of Control Scale was administered to first-year students both at the beginning and the end of the study. The majority of first-year students stated that they benefited from the programme. It was established that the mentoring programme influenced the locus of control positively. The mentoring programme may be used to improve the adaptation of nursing students to both the university and nursing profession. Copyright © 2010 Elsevier Ltd. All rights reserved.

Video denoising, deblocking, and enhancement through separable 4-D nonlocal spatiotemporal transforms.

PubMed

Maggioni, Matteo; Boracchi, Giacomo; Foi, Alessandro; Egiazarian, Karen

2012-09-01

We propose a powerful video filtering algorithm that exploits temporal and spatial redundancy characterizing natural video sequences. The algorithm implements the paradigm of nonlocal grouping and collaborative filtering, where a higher dimensional transform-domain representation of the observations is leveraged to enforce sparsity, and thus regularize the data: 3-D spatiotemporal volumes are constructed by tracking blocks along trajectories defined by the motion vectors. Mutually similar volumes are then grouped together by stacking them along an additional fourth dimension, thus producing a 4-D structure, termed group, where different types of data correlation exist along the different dimensions: local correlation along the two dimensions of the blocks, temporal correlation along the motion trajectories, and nonlocal spatial correlation (i.e., self-similarity) along the fourth dimension of the group. Collaborative filtering is then realized by transforming each group through a decorrelating 4-D separable transform and then by shrinkage and inverse transformation. In this way, the collaborative filtering provides estimates for each volume stacked in the group, which are then returned and adaptively aggregated to their original positions in the video. The proposed filtering procedure addresses several video processing applications, such as denoising, deblocking, and enhancement of both grayscale and color data. Experimental results prove the effectiveness of our method in terms of both subjective and objective visual quality, and show that it outperforms the state of the art in video denoising.

Teaching communications skills to medical students: Introducing the fine art of medical practice.

PubMed

Choudhary, Anjali; Gupta, Vineeta

2015-08-01

Like many other people based professions, communications skills are essential to medical practice also. Traditional medical teaching in India does not address communication skills which are most essential in dealing with patients. Communication skills can be taught to medical students to increase clinical competence. To teach basic communication and counseling skills to fourth-year undergraduate students to increase their clinical competence. A total of 48, fourth-year MBBS students participated in the study. They were given training in basic communication and counseling skills and taught the patient interview technique according to Calgary-Cambridge guide format. Improvement in communication was assessed by change in pre- and post-training multiple choice questions, clinical patient examination, and Standardized Patient Satisfaction Questionnaire (SPSQ) scores. About 88% of the students in the sample were convinced of the importance of learning communication skills for effective practice. Almost 90% students were communicating better after training, as tested by improved SPSQ. As judged by Communication Skill Attitude Scale, student's positive attitude toward learning communication skill indicated that there is a necessity of communication skill training during undergraduate years. The ability to communicate effectively is a core competency for medical practitioners. Inculcating habits of good communications skill during formative years will help the medical students and future practitioners. Regular courses on effective communication should be included in the medical school curriculum.

Early-stage chronic kidney disease, insulin resistance, and osteoporosis as risk factors of sarcopenia in aged population: the fourth Korea National Health and Nutrition Examination Survey (KNHANES IV), 2008-2009.

PubMed

Kim, J E; Lee, Y-H; Huh, J H; Kang, D R; Rhee, Y; Lim, S-K

2014-09-01

Sarcopenia means the progressive loss of skeletal muscle mass and strength with aging. In this study, we found that insulin resistance, chronic kidney disease stage 3, and osteoporosis at the femur neck were closely associated with sarcopenia in elderly men. These conditions modified to slow down the progression of sarcopenia. Sarcopenia is known to have multiple contributing factors; however, its modifiable risk factors have not yet been determined. The aim of this study was to identify the most influential and modifiable risk factors for sarcopenia in elderly. This was a population-based, cross-sectional study using data from the Fourth Korea National Health and Nutrition Examination Survey (KNHANES IV), 2008-2009. This study included 940 men and 1,324 women aged 65 years and older who completed a body composition analysis using dual-energy X-ray absorptiometry. Sarcopenia was defined as an appendicular skeletal muscle mass divided by height(2) of less than 1 standard deviation below the sex-specific mean for a younger reference group. Using univariate analysis, age, body mass index (BMI), homeostasis model assessment for insulin resistance (HOMA-IR), limitations in daily activities, regular exercise, high-risk drinking, family income, osteoporosis, daily energy, and protein intake were associated with sarcopenia in men; age, BMI, limitations in daily activities, regular exercise, occupation, osteoporosis at the total hip, and daily energy intake were associated with sarcopenia in women. In the multivariate logistic regression analysis, HOMA-IR ≥2.5 (odds ratio [OR] for sarcopenia, 2.27; 95 % confidence interval [CI], 1.21-4.25), chronic kidney disease stage 3 (OR, 3.13; 95 % CI, 1.14-8.61), and osteoporosis at the femur neck (OR, 6.83; 95 % CI, 1.08-43.41) were identified as risk factors for sarcopenia in men. Insulin resistance, chronic kidney disease, and osteoporosis at the femur neck should be modified to prevent the acceleration of skeletal muscle loss in elderly men.

Approaches to Interactive Video Anchors in Problem-based Science Learning

NASA Astrophysics Data System (ADS)

Kumar, David Devraj

2010-02-01

This paper is an invited adaptation of the IEEE Education Society Distinguished Lecture Approaches to Interactive Video Anchors in Problem-Based Science Learning. Interactive video anchors have a cognitive theory base, and they help to enlarge the context of learning with information-rich real-world situations. Carefully selected movie clips and custom-developed regular videos and virtual simulations have been successfully used as anchors in problem-based science learning. Examples discussed include a range of situations such as Indiana Jones tackling a trap, a teenager misrepresenting lead for gold, an agriculture inspection at the US border, counterintuitive events, analyzing a river ecosystem for pollution, and finding the cause of illness in a nineteenth century river city. Suggestions for teachers are provided.

A Robust Damage-Reporting Strategy for Polymeric Materials Enabled by Aggregation-Induced Emission.

PubMed

Robb, Maxwell J; Li, Wenle; Gergely, Ryan C R; Matthews, Christopher C; White, Scott R; Sottos, Nancy R; Moore, Jeffrey S

2016-09-28

Microscopic damage inevitably leads to failure in polymers and composite materials, but it is difficult to detect without the aid of specialized equipment. The ability to enhance the detection of small-scale damage prior to catastrophic material failure is important for improving the safety and reliability of critical engineering components, while simultaneously reducing life cycle costs associated with regular maintenance and inspection. Here, we demonstrate a simple, robust, and sensitive fluorescence-based approach for autonomous detection of damage in polymeric materials and composites enabled by aggregation-induced emission (AIE). This simple, yet powerful system relies on a single active component, and the general mechanism delivers outstanding performance in a wide variety of materials with diverse chemical and mechanical properties.

First impressions about Adherus, a new dural sealant.

PubMed

Zoia, Cesare; Bongetta, Daniele; Lombardi, Francesco; Custodi, Viola Marta; Pugliese, Raffaelino; Gaetani, Paolo

2015-12-18

The aim of the study is to report our first impressions about Adherus, a novel dural sealant, used in neurosurgical endoscopic transnasal procedures. We retrospectively reviewed the clinical and surgical records of the first 11 patients with intraoperative high-flow cerebrospinal fluid leak treated with the aid of Adherus at our center between February and October 2014. The healing at the level of the dural plasty was monitored and evaluated radiologically and with regular endoscopic inspections. With a median follow-up of 210 days, no postoperative CSF leak or surgical site infections were found in any of the cases. Based on our preliminary experience, this new dural sealant seems to provide an effective aid in dural plasty during endoscopic transphenoidal procedures.

Assessing Motor Skill Competency in Elementary School Students: A Three-Year Study.

PubMed

Chen, Weiyun; Mason, Steve; Hypnar, Andrew; Bennett, Austin

2016-03-01

This study was to examine how well fourth- and fifth-grade students demonstrated motor skill competency assessed with selected PE Metrics assessment rubrics (2009). Fourth- and fifth-grade students (n = 1,346-1,926) were assessed on their performance of three manipulative skills using the PE Metrics Assessment Rubrics during the pre-intervention year, the post-intervention year 1, and the post-intervention year 3. Descriptive statistics, independent t-test, ANOVA, and follow-up comparisons were conducted for data analysis. The results indicated that the post-intervention year 2 cohort performed significantly more competent than the pre-intervention cohort and the post-intervention year 1 cohort on the three manipulative skill assessments. The post-intervention year 1 cohort significantly outperformed the pre-intervention cohort on the soccer dribbling, passing, and receiving and the striking skill assessments, but not on the throwing skill assessment. Although the boys in the three cohorts performed significantly better than the girls on all three skills, the girls showed substantial improvement on the overhand throwing and the soccer skills from baseline to the post-intervention year 1 and the post-intervention year 2. However, the girls, in particular, need to improve striking skill. The CTACH PE was conducive to improving fourth- and fifth-grade students' motor skill competency in the three manipulative skills. This study suggest that PE Metrics assessment rubrics are feasible tools for PE teachers to assess levels of students' demonstration of motor skill competency during a regular PE lesson. Key pointsCATCH PE is an empirically-evidenced quality PE curricular that is conducive to improving students' manipulative skill competency.Boys significantly outperformed than girls in all three manipulative skills.Girls need to improve motor skill competency in striking skill. PE Metrics are feasible assessment rubrics that can be easily used by trained physical education teachers to assess students' manipulative skill competency.

Assessing Motor Skill Competency in Elementary School Students: A Three-Year Study

PubMed Central

Chen, Weiyun; Mason, Steve; Hypnar, Andrew; Bennett, Austin

2016-01-01

This study was to examine how well fourth- and fifth-grade students demonstrated motor skill competency assessed with selected PE Metrics assessment rubrics (2009). Fourth- and fifth-grade students (n = 1,346-1,926) were assessed on their performance of three manipulative skills using the PE Metrics Assessment Rubrics during the pre-intervention year, the post-intervention year 1, and the post-intervention year 3. Descriptive statistics, independent t-test, ANOVA, and follow-up comparisons were conducted for data analysis. The results indicated that the post-intervention year 2 cohort performed significantly more competent than the pre-intervention cohort and the post-intervention year 1 cohort on the three manipulative skill assessments. The post-intervention year 1 cohort significantly outperformed the pre-intervention cohort on the soccer dribbling, passing, and receiving and the striking skill assessments, but not on the throwing skill assessment. Although the boys in the three cohorts performed significantly better than the girls on all three skills, the girls showed substantial improvement on the overhand throwing and the soccer skills from baseline to the post-intervention year 1 and the post-intervention year 2. However, the girls, in particular, need to improve striking skill. The CTACH PE was conducive to improving fourth- and fifth-grade students’ motor skill competency in the three manipulative skills. This study suggest that PE Metrics assessment rubrics are feasible tools for PE teachers to assess levels of students’ demonstration of motor skill competency during a regular PE lesson. Key points CATCH PE is an empirically-evidenced quality PE curricular that is conducive to improving students’ manipulative skill competency. Boys significantly outperformed than girls in all three manipulative skills. Girls need to improve motor skill competency in striking skill. PE Metrics are feasible assessment rubrics that can be easily used by trained physical education teachers to assess students’ manipulative skill competency. PMID:26957932

Achieving Excellence Through Contemporary and Relevant Psychiatric-Mental Health Nursing Standards of Practice.

PubMed

McInnis-Perry, Gloria; Greene, Ann; Mina, Elaine Santa

2015-09-01

Standards of practice (SOPs) comprise competency statements, which are grounded in current knowledge and research, and provide foundations for performance that support professional accountability. The nursing profession, and specifically the psychiatric-mental health specialty of nursing practice in Canada, develops and revises practice standards regularly. The current article describes the collaborative, evidence-informed journey of the Canadian Federation of Mental Health Nurses during its fourth revision of the Canadian Psychiatric-Mental Health Nursing SOPs. An intraprofessional team of psychiatric-mental health nurses from the clinical, academic, research, and policy areas developed and nurtured collaborative processes that emphasize collegial and authentic relationships. Effective communication and a respectful learning environment supported the process for all members of the team. The current article provides recommendations for other professional organizations considering developing and/or revising SOPs. Copyright 2015, SLACK Incorporated.

Analysis of Real Ship Rolling Dynamics under Wave Excitement Force Composed of Sums of Cosine Functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Y. S.; Cai, F.; Xu, W. M.

2011-09-28

The ship motion equation with a cosine wave excitement force describes the slip moments in regular waves. A new kind of wave excitement force model, with the form as sums of cosine functions was proposed to describe ship rolling in irregular waves. Ship rolling time series were obtained by solving the ship motion equation with the fourth-order-Runger-Kutta method. These rolling time series were synthetically analyzed with methods of phase-space track, power spectrum, primary component analysis, and the largest Lyapunove exponent. Simulation results show that ship rolling presents some chaotic characteristic when the wave excitement force was applied by sums ofmore » cosine functions. The result well explains the course of ship rolling's chaotic mechanism and is useful for ship hydrodynamic study.« less

Making instruction and assessment responsive to diverse students' progress: group-administered dynamic assessment in teaching mathematics.

PubMed

Jeltova, Ida; Birney, Damian; Fredine, Nancy; Jarvin, Linda; Sternberg, Robert J; Grigorenko, Elena L

2011-01-01

This study entailed a 3 (instructional intervention) × 2 (assessment-type) between-subjects experimental design employing a pretest-intervention-posttest methodology. The instructional interventions were administered between subjects in three conditions: (a) dynamic instruction, (b) triarchic or theory of successful intelligence-control instruction, and (c) standard-control instruction. The assessment-type consisted between subjects of either (a) a group-administered dynamic posttest or (b) the same group-administered posttest interspersed with a control filler activity. Performance in different mathematics content areas taught in fourth grade was investigated. In total, 1,332 students and 63 classroom teachers in 24 schools across six school districts participated in the study. The results indicate the advantages of using dynamic instruction and assessment in regular classrooms while teaching mathematics, especially when the student body is highly ethnically diverse.

Post-Closure Inspection and Monitoring Report for Corrective Action Unit 110: Area 3 WMD U-3ax/bl Crater, Nevada Test Site, Nevada, For the Period July 2007-June 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Restoration

2008-08-01

This Post-Closure Inspection and Monitoring Report (PCIMR) provides the results of inspections and monitoring for Corrective Action Unit (CAU) 110, Area 3 WMD [Waste Management Division] U-3ax/bl Crater. This PCIMR includes an analysis and summary of the site inspections, repairs and maintenance, meteorological information, and soil moisture monitoring data obtained at CAU 110 for the period July 2007 through June 2008. Site inspections of the cover were performed quarterly to identify any significant changes to the site requiring action. The overall condition of the cover, perimeter fence, and use restriction (UR) warning signs was good. However, settling was observed thatmore » exceeded the action level as specified in Section VII.B.7 of the Hazardous Waste Permit Number NEV HW021 (Nevada Division of Environmental Protection, 2005). This permit states that cracks or settling greater than 15 centimeters (6 inches) deep that extend 1.0 meter (m) (3 feet [ft]) or more on the cover will be evaluated and repaired within 60 days of detection. Two areas of settling and cracks were observed on the south and east edges of the cover during the September 2007 inspection that exceeded the action level and required repair. The areas were repaired in October 2007. Additional settling and cracks were observed along the east side of the cover during the December 2007 inspection that exceeded the action level, and the area was repaired in January 2008. Significant animal burrows were also observed during the March 2008 inspection, and small mammal trapping and relocation was performed in April 2008. The semiannual subsidence surveys were performed in September 2007 and March 2008. No significant subsidence was observed in the survey data. Monument 5 shows the greatest amount of subsidence (-0.02 m [-0.08 ft] compared to the baseline survey of 2000). This amount is negligible and near the resolution of the survey instruments; it does not indicate that subsidence is occurring overall on the cover. Soil moisture results obtained to date indicate that the CAU 110 cover is performing well. Time Domain Reflectometry (TDR) data show regular changes in the shallow subsurface with significant rain events; however, major changes in volumetric moisture content (VMC) appear to be limited to 1.8 m (6 ft) below ground surface or shallower, depending on the location on the cover. At 2.4 m (8 ft) below the cover surface, TDR data show soil moisture content remained between 9 and 15 percent VMC, depending on the TDR location. The west portion of the cover tends to reflect a lower moisture content and less variability in annual fluctuations in moisture content at this depth. Results of soil moisture monitoring of the cover indicate that VMC at the compliance level (at 2.4 m [8 ft] below the cover surface) is approaching a steady state. If the moisture content at this level remains consistent with recent years, then a recommendation may be made for establishing compliance levels for future monitoring.« less

Influence of the Bolsa Família program on nutritional status and food frequency of schoolchildren.

PubMed

do Carmo, Ariene Silva; de Almeida, Lorena Magalhães; de Oliveira, Daniela Rodrigues; Dos Santos, Luana Caroline

2016-01-01

To evaluate the food frequency and nutritional status among students according to participation in the Bolsa Família program funded by the government. Cross-sectional study carried out with students from the fourth grade of elementary school in the municipal capital of the southeastern region of Brazil. Food consumption and anthropometry were investigated by a questionnaire administered in school, while participation in the Bolsa Família program and other socio-economic information was obtained through a protocol applied to mothers/guardians. Statistical analysis included the Mann-Whitney test, the chi-squared test, and Poisson regression with robust variance, and the 5% significance level was adopted. There were 319 children evaluated; 56.4% were male, with a median of 9.4 (8.6-11.9) years, and 37.0% were beneficiaries of Bolsa Família program. Between the two groups, there was high prevalence of regular soda consumption (34.3%), artificial juice (49.5%), and sweets (40.3%), while only 54.3% and 51.7% consumed fruits and vegetables regularly, respectively. Among participants of Bolsa Família program, a prevalence 1.24 times higher in the regular consumption of soft drinks (95% CI: 1.10-1.39) was identified compared to non-beneficiaries. The prevalence of overweight was higher in the sample (32.9%), with no difference according to participation in the program. The study found increased consumption of soft drinks among BFP participants. The high rate of overweight and poor eating habits denote the need to develop actions to promote healthy eating, especially for the beneficiaries of the Bolsa Família program, to promote improvements in nutritional status and prevent chronic diseases throughout life. Copyright © 2016 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

Compliance with lifestyle recommendations in kidney allograft recipients.

PubMed

Kobus, G; Małyszko, J; Małyszko, J S; Puza, E; Bachórzewska-Gajewska, H; Myśliwiec, M

2011-10-01

Many factors affect long-term graft and patient survival. Compliance with lifestyle recommendation may be an important factor. Lifestyle modifications may play a therapeutic and protective role against graft failure and possible death. The aim of this work was to assess compliance with lifestyle recommendations among 110 kidney allograft recipients. All patients were asked to complete a questionnaire regarding life style, frequency of outpatient visits, self-control, diet, physical activity and addictions. The mean age of the population was 48.79±13.18 years, and their mean time after transplantation was 69±44.5 years with a mean serum creatinine value of 1.45±0.7 mg/dL. Physicians were the major source of information (40%) for patients while in the hospital; nurses informed patients in only 5.5% of cases. The majority of patients (97.5%) attended regular outpatient clinic visits. A similar percentage of subjects regularly measured their blood pressure at home. One-fifth of the patient wrote a self-control diary. Only 55.5% of patients knew the immunosuppressive regimen, including the doses of the medications. An overweight condition was diagnosed in 39%, with obesity in 22%; 16% of the patients were smokers; one-fourth of the patients drank alcohol at least several times a month; 85.3% of patients did not change their diet after kidney transplantation; and one-half of the patients (64.2%) were not aware of dietary recommendations after kidney transplantation. The majority of patients regularly attended the outpatient clinic and ingested immunosuppressive medications. However, their knowledge regarding diet, cancer prophylaxis, and self-control was insufficient. Therefore, there is a need to introduce more intense organizational and educational activities to improve patient knowledge. Copyright © 2011 Elsevier Inc. All rights reserved.

Evaluation of machine learning tools for inspection of steam generator tube structures using pulsed eddy current

NASA Astrophysics Data System (ADS)

Buck, J. A.; Underhill, P. R.; Morelli, J.; Krause, T. W.

2017-02-01

Degradation of nuclear steam generator (SG) tubes and support structures can result in a loss of reactor efficiency. Regular in-service inspection, by conventional eddy current testing (ECT), permits detection of cracks, measurement of wall loss, and identification of other SG tube degradation modes. However, ECT is challenged by overlapping degradation modes such as might occur for SG tube fretting accompanied by tube off-set within a corroding ferromagnetic support structure. Pulsed eddy current (PEC) is an emerging technology examined here for inspection of Alloy-800 SG tubes and associated carbon steel drilled support structures. Support structure hole size was varied to simulate uniform corrosion, while SG tube was off-set relative to hole axis. PEC measurements were performed using a single driver with an 8 pick-up coil configuration in the presence of flat-bottom rectangular frets as an overlapping degradation mode. A modified principal component analysis (MPCA) was performed on the time-voltage data in order to reduce data dimensionality. The MPCA scores were then used to train a support vector machine (SVM) that simultaneously targeted four independent parameters associated with; support structure hole size, tube off-centering in two dimensions and fret depth. The support vector machine was trained, tested, and validated on experimental data. Results were compared with a previously developed artificial neural network (ANN) trained on the same data. Estimates of tube position showed comparable results between the two machine learning tools. However, the ANN produced better estimates of hole inner diameter and fret depth. The better results from ANN analysis was attributed to challenges associated with the SVM when non-constant variance is present in the data.

Playing Chemical Plant Environmental Protection Games with Historical Monitoring Data

PubMed Central

Reniers, Genserik; Zhang, Laobing; Qiu, Xiaogang

2017-01-01

The chemical industry is very important for the world economy and this industrial sector represents a substantial income source for developing countries. However, existing regulations on controlling atmospheric pollutants, and the enforcement of these regulations, often are insufficient in such countries. As a result, the deterioration of surrounding ecosystems and a quality decrease of the atmospheric environment can be observed. Previous works in this domain fail to generate executable and pragmatic solutions for inspection agencies due to practical challenges. In addressing these challenges, we introduce a so-called Chemical Plant Environment Protection Game (CPEP) to generate reasonable schedules of high-accuracy air quality monitoring stations (i.e., daily management plans) for inspection agencies. First, so-called Stackelberg Security Games (SSGs) in conjunction with source estimation methods are applied into this research. Second, high-accuracy air quality monitoring stations as well as gas sensor modules are modeled in the CPEP game. Third, simplified data analysis on the regularly discharging of chemical plants is utilized to construct the CPEP game. Finally, an illustrative case study is used to investigate the effectiveness of the CPEP game, and a realistic case study is conducted to illustrate how the models and algorithms being proposed in this paper, work in daily practice. Results show that playing a CPEP game can reduce operational costs of high-accuracy air quality monitoring stations. Moreover, evidence suggests that playing the game leads to more compliance from the chemical plants towards the inspection agencies. Therefore, the CPEP game is able to assist the environmental protection authorities in daily management work and reduce the potential risks of gaseous pollutants dispersion incidents. PMID:28961188

Analytical Modeling Tool for Design of Hydrocarbon Sensitive Optical Fibers

PubMed Central

Vahdati, Nader; Lawand, Lydia

2017-01-01

Pipelines are the main transportation means for oil and gas products across large distances. Due to the severe conditions they operate in, they are regularly inspected using conventional Pipeline Inspection Gages (PIGs) for corrosion damage. The motivation for researching a real-time distributed monitoring solution arose to mitigate costs and provide a proactive indication of potential failures. Fiber optic sensors with polymer claddings provide a means of detecting contact with hydrocarbons. By coating the fibers with a layer of metal similar in composition to that of the parent pipeline, corrosion of this coating may be detected when the polymer cladding underneath is exposed to the surrounding hydrocarbons contained within the pipeline. A Refractive Index (RI) change occurs in the polymer cladding causing a loss in intensity of a traveling light pulse due to a reduction in the fiber’s modal capacity. Intensity losses may be detected using Optical Time Domain Reflectometry (OTDR) while pinpointing the spatial location of the contact via time delay calculations of the back-scattered pulses. This work presents a theoretical model for the above sensing solution to provide a design tool for the fiber optic cable in the context of hydrocarbon sensing following corrosion of an external metal coating. Results are verified against the experimental data published in the literature. PMID:28956847

Evaluation of the concept of pressure proof testing fuselage structures

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Orringer, Oscar

1991-01-01

The FAA and NASA have recently completed independent technical evaluations of the concept of pressure proof testing the fuselage of commercial transport airplanes. The results of these evaluations are summarized. The objectives of the evaluations were to establish the potential benefit of the pressure proof test, to quantify the most desirable proof test pressure, and to quantify the required proof test interval. The focus of the evaluations was on multiple-site cracks extending from adjacent rivet holes of a typical fuselage longitudinal lap splice joint. The FAA and NASA do not support pressure proof testing the fuselage of aging commercial transport aircraft. The argument against proof testing is as follows: (1) a single proof test does not insure an indefinite life; therefore, the proof test must be repeated at regular intervals; (2) for a proof factor of 1.33, the required proof test interval must be below 300 flights to account for uncertainties in the evaluation; (3) conducting the proof test at a proof factor of 1.5 would considerably exceed the fuselage design limit load; therefore, it is not consistent with accepted safe practices; and (4) better safety can be assured by implementing enhanced nondestructive inspection requirements, and adequate reliability can be achieved by an inspection interval several times longer than the proof test interval.

Analytical Modeling Tool for Design of Hydrocarbon Sensitive Optical Fibers.

PubMed

Al Handawi, Khalil; Vahdati, Nader; Shiryayev, Oleg; Lawand, Lydia

2017-09-28

Pipelines are the main transportation means for oil and gas products across large distances. Due to the severe conditions they operate in, they are regularly inspected using conventional Pipeline Inspection Gages (PIGs) for corrosion damage. The motivation for researching a real-time distributed monitoring solution arose to mitigate costs and provide a proactive indication of potential failures. Fiber optic sensors with polymer claddings provide a means of detecting contact with hydrocarbons. By coating the fibers with a layer of metal similar in composition to that of the parent pipeline, corrosion of this coating may be detected when the polymer cladding underneath is exposed to the surrounding hydrocarbons contained within the pipeline. A Refractive Index (RI) change occurs in the polymer cladding causing a loss in intensity of a traveling light pulse due to a reduction in the fiber's modal capacity. Intensity losses may be detected using Optical Time Domain Reflectometry (OTDR) while pinpointing the spatial location of the contact via time delay calculations of the back-scattered pulses. This work presents a theoretical model for the above sensing solution to provide a design tool for the fiber optic cable in the context of hydrocarbon sensing following corrosion of an external metal coating. Results are verified against the experimental data published in the literature.

Inspection des pieces flexibles sans gabarit de conformation

NASA Astrophysics Data System (ADS)

Aidibe, Ali

In this thesis, we focus on the automation of the fixtureless geometric inspection of non-rigid (or compliant) parts. The primary objective of this project is to handle virtually this type of component and their point cloud, which represents a scan taken in a Free State condition, by eliminating the use of very expensive and complicated specialized fixtures posing productivity problems for manufacturing companies. This topic is a very high interest in the transport sector and, more specifically, in the aerospace one in order to significantly improve its productivity and its degree of competitiveness. The thesis is organized by articles. The study is divided over four phases. The first three phases will be represented by three journal papers and the fourth phase is presented as an appendix. The first phase of this work is intended to improve the identification module of an existing inspection mathematical tool " IDI: The Iterative Displacement Inspection " which has been developed by the research team working under the supervision of professor Tahan at ETS. The identification module aims to distinguish between defects that are due to the manufacturing process and deformations that are due to the flexibility of the part (gravity and residual stress effects). We propose to replace the original module with a new one which is based on the extreme value statistical analysis. We demonstrate that the new module remarkably reduces the type I and type II errors. In addition, unlike the identification method of the IDI, the proposed one does not require a user-specified threshold based on a trial and error process. In the second phase of this study, we propose an original approach to measure the flexibility/rigidity of the mechanical components. We introduce a factor that represents the ratio between the maximum displacement resulting from the deformation of the part and its profile tolerance and we present the results in a logarithmic scale. Three different regions were defined as giving a clear idea to the manufacturing industry about the situation of the parts on the flexibility scale. Subsequently, we propose a new fixtureless inspection method for compliant parts: the IDB-CTB " Inspection of Deformable Bodies by Curvature and Thompson-Biweight " method. This approach combines the Gaussian curvature estimation, one of the intrinsic properties of the surface which is invariant under isometric transformations, with an identification method based on the extreme value statistics ( Thompson-Biweight Test). The low percentage of error in defect areas and in profile deviations estimated reflects the effectiveness of our approach. In the third phase of this thesis, we propose a novel method that can be considered as complementary to the IDB-CTB approach. In addition to the profile deviations, we aim to detect the localization defects. We introduce two criteria that correspond to the specification of compliant parts: the conservation of the curvilinear distance and the minimization between two objects (Hausdorff Distance). We adapt and automate the Coherent Point Drift; a powerful non-rigid registration algorithm widely used in medical imagery and animation, for satisfying these two criteria. We obtain satisfying results by applying the third approach on a typical aerospace sheet metal. The conclusion of this thesis summarizes the scientific contributions through our work on the fixtureless inspection of compliant parts and the perspective related with it. In the appendix, we introduce a graphical user interface (GUI) created to handle the proposed approaches as well as the case studies bank developed in the training at Bombardier Aerospace Inc.

Enhanced capture rate for haze defects in production wafer inspection

NASA Astrophysics Data System (ADS)

Auerbach, Ditza; Shulman, Adi; Rozentsvige, Moshe

2010-03-01

Photomask degradation via haze defect formation is an increasing troublesome yield problem in the semiconductor fab. Wafer inspection is often utilized to detect haze defects due to the fact that it can be a bi-product of process control wafer inspection; furthermore, the detection of the haze on the wafer is effectively enhanced due to the multitude of distinct fields being scanned. In this paper, we demonstrate a novel application for enhancing the wafer inspection tool's sensitivity to haze defects even further. In particular, we present results of bright field wafer inspection using the on several photo layers suffering from haze defects. One way in which the enhanced sensitivity can be achieved in inspection tools is by using a double scan of the wafer: one regular scan with the normal recipe and another high sensitivity scan from which only the repeater defects are extracted (the non-repeater defects consist largely of noise which is difficult to filter). Our solution essentially combines the double scan into a single high sensitivity scan whose processing is carried out along two parallel routes (see Fig. 1). Along one route, potential defects follow the standard recipe thresholds to produce a defect map at the nominal sensitivity. Along the alternate route, potential defects are used to extract only field repeater defects which are identified using an optimal repeater algorithm that eliminates "false repeaters". At the end of the scan, the two defect maps are merged into one with optical scan images available for all the merged defects. It is important to note, that there is no throughput hit; in addition, the repeater sensitivity is increased relative to a double scan, due to a novel runtime algorithm implementation whose memory requirements are minimized, thus enabling to search a much larger number of potential defects for repeaters. We evaluated the new application on photo wafers which consisted of both random and haze defects. The evaluation procedure involved scanning with three different recipe types: Standard Inspection: Nominal recipe with a low false alarm rate was used to scan the wafer and repeaters were extracted from the final defect map. Haze Monitoring Application: Recipe sensitivity was enhanced and run on a single field column from which on repeating defects were extracted. Enhanced Repeater Extractor: Defect processing included the two parallel routes: a nominal recipe for the random defects and the new high sensitive repeater extractor algorithm. The results showed that the new application (recipe #3) had the highest capture rate on haze defects and detected new repeater defects not found in the first two recipes. In addition, the recipe was much simpler to setup since repeaters are filtered separately from random defects. We expect that in the future, with the advent of mask-less lithography and EUV lithography, the monitoring of field and die repeating defects on the wafer will become a necessity for process control in the semiconductor fab.

Automatic detection method for mura defects on display film surface using modified Weber's law

NASA Astrophysics Data System (ADS)

Kim, Myung-Muk; Lee, Seung-Ho

2014-07-01

We propose a method that automatically detects mura defects on display film surfaces using a modified version of Weber's law. The proposed method detects mura defects regardless of their properties and shapes by identifying regions perceived by human vision as mura using the brightness of pixel and image distribution ratio of mura in an image histogram. The proposed detection method comprises five stages. In the first stage, the display film surface image is acquired and a gray-level shift performed. In the second and third stages, the image histogram is acquired and analyzed, respectively. In the fourth stage, the mura range is acquired. This is followed by postprocessing in the fifth stage. Evaluations of the proposed method conducted using 200 display film mura image samples indicate a maximum detection rate of ˜95.5%. Further, the results of application of the Semu index for luminance mura in flat panel display (FPD) image quality inspection indicate that the proposed method is more reliable than a popular conventional method.

HEP in Greek Classes

NASA Astrophysics Data System (ADS)

Fassouliotis, Dimitris; Kourkoumelis, Christine; Vourakis, Stylianos

2017-03-01

The HEP Inquiry learning resources created over the last four years by the European outreach projects are reviewed. The resources are mostly addressed to high school students and the purpose is to ignite their interest on science. In addition, at the University of Athens for the last four years we have been using the HYPATIA online event analysis tool as a lab course for fourth year undergraduate physics students, majoring in HEP. Each year 40-50 students highly appreciated the course, since they get a direct involvement in the actual toplevel research. Up to now, the course was limited to visual inspection of a few tens of ATLAS events. Recently we have enriched the course with additional analysis exercises, which involve large samples of events. The students, through a user friendly interface can analyze the samples (both signal and background ones) and optimize the cut selection in order to search for the Higgs decay H □ 4 leptons. Recently ATLAS released 1/fb of data, so starting now the students analyse real data.

Comparison of Acid Titration, Conductivity, Flame Photometry, ICP-MS, and Accelerated Lamellae Formation Techniques in Determining Glass Vial Quality.

PubMed

Fujimori, Kiyoshi; Lee, Hans; Sloey, Christopher; Ricci, Margaret S; Wen, Zai-Qing; Phillips, Joseph; Nashed-Samuel, Yasser

2016-01-01

Certain types of glass vials used as primary containers for liquid formulations of biopharmaceutical drug products have been observed with delamination that produced small glass like flakes termed lamellae under certain conditions during storage. The cause of this delamination is in part related to the glass surface defects, which renders the vials susceptible to flaking, and lamellae are formed during the high-temperature melting and annealing used for vial fabrication and shaping. The current European Pharmacopoeia method to assess glass vial quality utilizes acid titration of vial extract pools to determine hydrolytic resistance or alkalinity. Four alternative techniques with improved throughput, convenience, and/or comprehension were examined by subjecting seven lots of vials to analysis by all techniques. The first three new techniques of conductivity, flame photometry, and inductively coupled plasma mass spectrometry measured the same sample pools as acid titration. All three showed good correlation with alkalinity: conductivity (R(2) = 0.9951), flame photometry sodium (R(2) = 0.9895), and several elements by inductively coupled plasma mass spectrometry [(sodium (R(2) = 0.9869), boron (R(2) = 0.9796), silicon (R(2) = 0.9426), total (R(2) = 0.9639)]. The fourth technique processed the vials under conditions that promote delamination, termed accelerated lamellae formation, and then inspected those vials visually for lamellae. The visual inspection results without the lot with different processing condition correlated well with alkalinity (R(2) = 0.9474). Due to vial processing differences affecting alkalinity measurements and delamination propensity differently, the ratio of silicon and sodium measurements from inductively coupled plasma mass spectrometry was the most informative technique to assess overall vial quality and vial propensity for lamellae formation. The other techniques of conductivity, flame photometry, and accelerated lamellae formation condition may still be suitable for routine screening of vial lots produced under consistent processes. Recently, delamination that produced small glass like flakes termed lamellae has been observed in glass vials that are commonly used as primary containers for pharmaceutical drug products under certain conditions during storage. The main cause of these lamellae was the quality of the glass itself related to the manufacturing process. Current European Pharmacopoeia method to assess glass vial quality utilizes acid titration of vial extract pools to determine hydrolytic resistance or alkalinity. As alternative to the European Pharmacopoeia method, four other techniques were assessed. Three new techniques of conductivity, flame photometry, and inductively coupled plasma mass spectrometry measured the vial extract pool as acid titration to quantify quality, and they demonstrated good correlation with original alkalinity. The fourth technique processed the vials under conditions that promote delamination, termed accelerated lamellae formation, and the vials were then inspected visually for lamellae. The accelerated lamellae formation technique also showed good correlation with alkalinity. Of the new four techniques, inductively coupled plasma mass spectrometry was the most informative technique to assess overall vial quality even with differences in processing between vial lots. Other three techniques were still suitable for routine screening of vial lots produced under consistent processes. © PDA, Inc. 2016.

[Attitude and opinion of medical students about organ donation and transplantation].

PubMed

Galvao, Flavio H F; Caires, Renato A; Azevedo-Neto, Raimundo S; Mory, Eduardo K; Figueira, Estela R R; Otsuzi, Thiago S; Bacchella, Telesforo; Machado, Marcel C C

2007-01-01

We analyzed the opinion and understanding of medical students about organ donation and transplantation. 347 students voluntarily completed a questionnaire with 17 queries concerning organ donation and transplantation. They were analyzed to identify general tendencies and divided into five groups, according to their year of study (first through sixth year), to assess differences among the years. Students of the fifth and sixth years were placed in the same group. Results were analyzed by the Chi-square test. The intention to become a post mortem or living donor was of 89% and 90% respectively; however, only 62% were aware of living donation risks. 70% of the 347 students admitted regular or little knowledge of the subject, 90.2% considered organ transplantation an important issue for a medical graduation program, 76.9% considered informed/expressed consent the best organ donation criterion and 64.3% of them chose severity of patient disease as the best allocation condition. As students progressed in their studies their understanding about transplantation improved. Students of the fourth, fifth and sixth year manifested a negative attitude about organ donation to alcohol addicts, non donors, drug users, law offenders and foreigners. This data show the great interest and positive attitude of medical students toward organ donation and transplantation, despite the fact that most of them admitted having insufficient knowledge on the subject. A negative attitude by students of the fourth, fifth and sixth year on organ donation to alcohol addicts, non donors, drug users, law offenders and foreigners was also observed.

Integrated learning in dentistry: baseline data and first evaluation at the Dental School of Basel.

PubMed

Neuhaus, K W; Schegg, R; Krastl, G; Amato, M; Weiger, R; Walter, C

2008-08-01

Integrated learning modules were introduced and baseline information was collected, in order to identify the expectations regarding e-learning. Furthermore, first formative evaluation of fourth-year dental students was conducted and the experience gained with summative online assessment was reported. Questionnaires designed by Infratest dimap (Berlin, Germany) were distributed to undergraduate students (n = 72) of the School of Dentistry. The fourth-year dental students went through a preliminary evaluation process. An online test was evaluated and compared with a traditional examination. Sixty-three questionnaires were returned. Sixty-five per cent of the students were already familiar with e-learning. All but one student owned at least one personal computer or laptop. Ninety-one per cent of the students expected positive effects from the integration of online modules. Enhanced flexibility regarding time and location as well as comfortable access to learning materials were mentioned most frequently. Ninety per cent of the students expected to achieve better results by finding it easier to understand learning materials produced with multimedia tools. Sixty per cent of the students feared technical complications when using an online platform. The online test was successfully performed. A formative evaluation process demonstrated agreement between expectations and first experiences with e-learning. Most students expect the quality of their studies to improve by implementation of e-learning. Students appreciating regularly updated learning materials particularly emphasise the importance of its visualisation. Online tests might be an option for student's self-performance rating.

Genetic parameters of legendre polynomials for first parity lactation curves.

PubMed

Pool, M H; Janss, L L; Meuwissen, T H

2000-11-01

Variance components of the covariance function coefficients in a random regression test-day model were estimated by Legendre polynomials up to a fifth order for first-parity records of Dutch dairy cows using Gibbs sampling. Two Legendre polynomials of equal order were used to model the random part of the lactation curve, one for the genetic component and one for permanent environment. Test-day records from cows registered between 1990 to 1996 and collected by regular milk recording were available. For the data set, 23,700 complete lactations were selected from 475 herds sired by 262 sires. Because the application of a random regression model is limited by computing capacity, we investigated the minimum order needed to fit the variance structure in the data sufficiently. Predictions of genetic and permanent environmental variance structures were compared with bivariate estimates on 30-d intervals. A third-order or higher polynomial modeled the shape of variance curves over DIM with sufficient accuracy for the genetic and permanent environment part. Also, the genetic correlation structure was fitted with sufficient accuracy by a third-order polynomial, but, for the permanent environmental component, a fourth order was needed. Because equal orders are suggested in the literature, a fourth-order Legendre polynomial is recommended in this study. However, a rank of three for the genetic covariance matrix and of four for permanent environment allows a simpler covariance function with a reduced number of parameters based on the eigenvalues and eigenvectors.

Ising Critical Behavior of Inhomogeneous Curie-Weiss Models and Annealed Random Graphs

NASA Astrophysics Data System (ADS)

Dommers, Sander; Giardinà, Cristian; Giberti, Claudio; van der Hofstad, Remco; Prioriello, Maria Luisa

2016-11-01

We study the critical behavior for inhomogeneous versions of the Curie-Weiss model, where the coupling constant {J_{ij}(β)} for the edge {ij} on the complete graph is given by {J_{ij}(β)=β w_iw_j/( {sum_{kin[N]}w_k})}. We call the product form of these couplings the rank-1 inhomogeneous Curie-Weiss model. This model also arises [with inverse temperature {β} replaced by {sinh(β)} ] from the annealed Ising model on the generalized random graph. We assume that the vertex weights {(w_i)_{iin[N]}} are regular, in the sense that their empirical distribution converges and the second moment converges as well. We identify the critical temperatures and exponents for these models, as well as a non-classical limit theorem for the total spin at the critical point. These depend sensitively on the number of finite moments of the weight distribution. When the fourth moment of the weight distribution converges, then the critical behavior is the same as on the (homogeneous) Curie-Weiss model, so that the inhomogeneity is weak. When the fourth moment of the weights converges to infinity, and the weights satisfy an asymptotic power law with exponent {τ} with {τin(3,5)}, then the critical exponents depend sensitively on {τ}. In addition, at criticality, the total spin {S_N} satisfies that {S_N/N^{(τ-2)/(τ-1)}} converges in law to some limiting random variable whose distribution we explicitly characterize.

Harnessing Social Networks along with Consumer-Driven Electronic Communication Technologies to Identify and Engage Members of 'Hard-to-Reach' Populations: A Methodological Case Report

PubMed Central

2010-01-01

Background Sampling in the absence of accurate or comprehensive information routinely poses logistical, ethical, and resource allocation challenges in social science, clinical, epidemiological, health service and population health research. These challenges are compounded if few members of a target population know each other or regularly interact. This paper reports on the sampling methods adopted in ethnographic case study research with a 'hard-to-reach' population. Methods To identify and engage a small yet diverse sample of people who met an unusual set of criteria (i.e., pet owners who had been treating cats or dogs for diabetes), four sampling strategies were used. First, copies of a recruitment letter were posted in pet-friendly places. Second, information about the study was diffused throughout the study period via word of mouth. Third, the lead investigator personally sent the recruitment letter via email to a pet owner, who then circulated the information to others, and so on. Fourth, veterinarians were enlisted to refer people who had diabetic pets. The second, third and fourth strategies rely on social networks and represent forms of chain referral sampling. Results Chain referral sampling via email proved to be the most efficient and effective, yielding a small yet diverse group of respondents within one month, and at negligible cost. Conclusions The widespread popularity of electronic communication technologies offers new methodological opportunities for researchers seeking to recruit from hard-to-reach populations. PMID:20089187

Harnessing social networks along with consumer-driven electronic communication technologies to identify and engage members of 'hard-to-reach' populations: a methodological case report.

PubMed

Rock, Melanie J

2010-01-20

Sampling in the absence of accurate or comprehensive information routinely poses logistical, ethical, and resource allocation challenges in social science, clinical, epidemiological, health service and population health research. These challenges are compounded if few members of a target population know each other or regularly interact. This paper reports on the sampling methods adopted in ethnographic case study research with a 'hard-to-reach' population. To identify and engage a small yet diverse sample of people who met an unusual set of criteria (i.e., pet owners who had been treating cats or dogs for diabetes), four sampling strategies were used. First, copies of a recruitment letter were posted in pet-friendly places. Second, information about the study was diffused throughout the study period via word of mouth. Third, the lead investigator personally sent the recruitment letter via email to a pet owner, who then circulated the information to others, and so on. Fourth, veterinarians were enlisted to refer people who had diabetic pets. The second, third and fourth strategies rely on social networks and represent forms of chain referral sampling. Chain referral sampling via email proved to be the most efficient and effective, yielding a small yet diverse group of respondents within one month, and at negligible cost. The widespread popularity of electronic communication technologies offers new methodological opportunities for researchers seeking to recruit from hard-to-reach populations.

[Staple fixation for the treatment of hamate metacarpal joint injury].

PubMed

Tang, Yang-Hua; Zeng, Lin-Ru; Huang, Zhong-Ming; Yue, Zhen-Shuang; Xin, Da-Wei; Xu, Can-Da

2014-03-01

To investigate the effcacy of the staple fixation for the treatment of hamate metacarpal joint injury. From May 2009 to November 2012,16 patients with hamate metacarpal joint injury were treated with staple fixation including 10 males and 6 females with an average age of 33.6 years old ranging from 21 to 57 years. Among them, 11 cases were on the fourth or fifth metacarpal base dislocation without fractures, 5 cases were the fourth or fifth metacarpal base dislocation with avulsion fractures of the back of hamatum. Regular X-ray review was used to observe the fracture healing, joint replacement and position of staple fixation. The function of carpometacarpal joint and metacarpophalangeal joint were evaluated according to ASIA (TAM) system evaluation method. All incision were healed well with no infection. All patients were followed up from 16 to 24 months with an average of (10.0 +/- 2.7) months. No dislocation recurred, the position of internal fixator was good,no broken nail and screw withdrawal were occurred. Five patients with avulsion fracture of the back of hamatum achieved bone healing. The function of carpometacarpal joint and metacarpophalangeal was excellent in 10 cases,good in 5 cases, moderate in 1 case. The application of the staple for the treatment of hamatometacarpal joint injury has the advantages of simple operation, small trauma, reliable fixation, early postoperative function exercise and other advantages, which is the ideal operation mode for hamatometacarpal joint injury.

Knowledge and Attitudes About Oral Cancer Among Dental Students After Bologna Plan Implementation.

PubMed

Frola, María Inés; Barrios, Rocío

2017-09-01

Oral cancer is the most common of head and neck tumours. Dentists have an important role in the most effective prevention measures: controlling aetiological factors and early detection. Dental curriculum has suffered changes in their structures and contents during Bologna process. The aim of this study is to explore oral cancer knowledge and attitudes among dental students of Granada after the implementation of the Bologna plan. A cross-sectional study was carried out in the School of Dentistry of the University of Granada. A questionnaire was delivered to dental students in the fourth and fifth years (of study) to assess knowledge and attitudes about oral cancer area. 79.3 % related that they examined the oral mucosa from their patients regularly. Almost the whole sample (95.9 %) said that they would advise their patients about risk factors for oral cancer when they graduated. Tobacco followed by alcohol was the main oral cancer risk factor identified (94.2 and 72.7 %, respectively). 96.7 % of the sample would like to receive more information about this subject. Fourth year students had taught self-examination for early detection of oral cancer more frequently than fifth year students (42.5 versus 22.9 %, respectively). The results of this study revealed that dental students had good attitudes in the area of oral cancer. On the other hand, it highlights the need for an improvement of the teaching program regarding risk factors for oral cancer and performing routine oral examination.

Propogation loss with frequency of ultrasound guided waves in a composite metal-honeycomb structure

NASA Astrophysics Data System (ADS)

Saxena, Indu F.; Baid, Harsh K.; Guzman, Narciso; Kempen, Lothar U.; Mal, Ajit

2009-05-01

Non-destructive testing of critical structural components is time consuming, while necessary for maintaining safe operation. Large aerospace structures, such as the vertical stabilizers of aircraft undergo inspection at regular intervals for damage diagnostics. However, conventional techniques for damage detection and identification before repair can be scheduled are conducted off-line and therefore can take weeks. The use of guided ultrasound waves is being investigated to expedite damage detection in composites. We measure the frequency dependent loss of ultrasonic guided waves for a structure comprising a boron-nitride composite skin sandwiching an aluminum honeycomb. A wide range of ultrasound frequencies propagate as measured using PZTs, with the lowest attenuation observed about 200-250 kHz. These measurements are confirmed using optical fiber Bragg grating arrays used as ultrasound transducers.

Composite correlation filter for O-ring detection in stationary colored noise

NASA Astrophysics Data System (ADS)

Hassebrook, Laurence G.

2009-04-01

O-rings are regularly replaced in aircraft and if they are not replaced or if they are installed improperly, they can result in catastrophic failure of the aircraft. It is critical that the o-rings be packaged correctly to avoid mistakes made by technicians during routine maintenance. For this reason, fines may be imposed on the o-ring manufacturer if the o-rings are packaged incorrectly. That is, a single o-ring must be packaged and labeled properly. No o-rings or more than one o-ring per package is not acceptable. We present an industrial inspection system based on real-time composite correlation filtering that has successfully solved this problem in spite of opaque paper o-ring packages. We present the system design including the composite filter design.

Recognition and prevention of computed radiography image artifacts.

PubMed

Hammerstrom, Kevin; Aldrich, John; Alves, Len; Ho, Andrew

2006-09-01

Initiated by complaints of image artifacts, a thorough visual and radiographic investigation of 197 Fuji, 35 Agfa, and 37 Kodak computed radiography (CR) cassettes with imaging plates (IPs) in clinical use at four radiology departments was performed. The investigation revealed that the physical deterioration of the cassettes and IPs was more extensive than previously believed. It appeared that many of the image artifacts were the direct result of premature wear of the cassettes and imaging plates. The results indicate that a quality control program for CR cassettes and IPs is essential and should include not only cleaning of the cassettes and imaging plates on a regular basis, but also visual and radiographic image inspection to limit the occurrence of image artifacts and to prolong the life cycle of the CR equipment.

Effects of Soft Drinks on Resting State EEG and Brain-Computer Interface Performance.

PubMed

Meng, Jianjun; Mundahl, John; Streitz, Taylor; Maile, Kaitlin; Gulachek, Nicholas; He, Jeffrey; He, Bin

2017-01-01

Motor imagery-based (MI based) brain-computer interface (BCI) using electroencephalography (EEG) allows users to directly control a computer or external device by modulating and decoding the brain waves. A variety of factors could potentially affect the performance of BCI such as the health status of subjects or the environment. In this study, we investigated the effects of soft drinks and regular coffee on EEG signals under resting state and on the performance of MI based BCI. Twenty-six healthy human subjects participated in three or four BCI sessions with a resting period in each session. During each session, the subjects drank an unlabeled soft drink with either sugar (Caffeine Free Coca-Cola), caffeine (Diet Coke), neither ingredient (Caffeine Free Diet Coke), or a regular coffee if there was a fourth session. The resting state spectral power in each condition was compared; the analysis showed that power in alpha and beta band after caffeine consumption were decreased substantially compared to control and sugar condition. Although the attenuation of powers in the frequency range used for the online BCI control signal was shown, group averaged BCI online performance after consuming caffeine was similar to those of other conditions. This work, for the first time, shows the effect of caffeine, sugar intake on the online BCI performance and resting state brain signal.

Knowledge, Attitude and Practice towards Kangaroo Mother Care.

PubMed

Shah, Rakesh Kumar; Sainju, Nayan Kamal; Joshi, Sunil Kumar

2018-01-01

Kangaroo mother care is an effective and low cost technique which prevents neonate from hypothermia, a leading cause of preventable neonatal mortality. Knowledge and practice of Kangaroo mother care is of utmost importance in developing countries such as Nepal. Purpose of this study was to find out knowledge, attitude and practice of kangaroo mother care among health workers in tertiary health centres in Nepal. This cross sectional study was carried out in three teaching hospitals in Nepal during the period from January 2016 to April 2016. Doctors and nurses working in Paediatrics/Neonatal and Obstetrics/Gynaecology wards were surveyed using pretested questionnaire. Responses from the doctors and the nurses were compared. Response rate of the survey was 65%. All of the doctors and 95.3% of the nurses who participated in the survey had knowledge about kangaroo mother care.37.7%of the doctors and 48.8% of the nurses thought that this method is only used for neonates with low birth weight (<2500grams) (p= 0.013).Three fourth of the doctors and half of the nurses agreed that KMC is practiced regularly in their ward (p = 0.016). 22.2% participants informed that main reasons for not practicing kangaroo care regularly could be lack of skill and knowledge. We found that general knowledge and attitude of majority of doctors and nurses towards kangaroo mother care was good, however, its practise was not uniform.

How Accurately Can We Predict Eclipses for Algol? (Poster abstract)

NASA Astrophysics Data System (ADS)

Turner, D.

2016-06-01

(Abstract only) beta Persei, or Algol, is a very well known eclipsing binary system consisting of a late B-type dwarf that is regularly eclipsed by a GK subgiant every 2.867 days. Eclipses, which last about 8 hours, are regular enough that predictions for times of minima are published in various places, Sky & Telescope magazine and The Observer's Handbook, for example. But eclipse minimum lasts for less than a half hour, whereas subtle mistakes in the current ephemeris for the star can result in predictions that are off by a few hours or more. The Algol system is fairly complex, with the Algol A and Algol B eclipsing system also orbited by Algol C with an orbital period of nearly 2 years. Added to that are complex long-term O-C variations with a periodicity of almost two centuries that, although suggested by Hoffmeister to be spurious, fit the type of light travel time variations expected for a fourth star also belonging to the system. The AB sub-system also undergoes mass transfer events that add complexities to its O-C behavior. Is it actually possible to predict precise times of eclipse minima for Algol months in advance given such complications, or is it better to encourage ongoing observations of the star so that O-C variations can be tracked in real time?

Effects of additional team-based learning on students' clinical reasoning skills: a pilot study.

PubMed

Jost, Meike; Brüstle, Peter; Giesler, Marianne; Rijntjes, Michel; Brich, Jochen

2017-07-14

In the field of Neurology good clinical reasoning skills are essential for successful diagnosing and treatment. Team-based learning (TBL), an active learning and small group instructional strategy, is a promising method for fostering these skills. The aim of this pilot study was to examine the effects of a supplementary TBL-class on students' clinical decision-making skills. Fourth- and fifth-year medical students participated in this pilot study (static-group comparison design). The non-treatment group (n = 15) did not receive any additional training beyond regular teaching in the neurology course. The treatment group (n = 11) took part in a supplementary TBL-class optimized for teaching clinical reasoning in addition to the regular teaching in the neurology course. Clinical decision making skills were assessed using a key-feature problem examination. Factual and conceptual knowledge was assessed by a multiple-choice question examination. The TBL-group performed significantly better than the non-TBL-group (p = 0.026) in the key-feature problem examination. No significant differences between the results of the multiple-choice question examination of both groups were found. In this pilot study participants of a supplementary TBL-class significantly improved clinical decision-making skills, indicating that TBL may be an appropriate method for teaching clinical decision making in neurology. Further research is needed for replication in larger groups and other clinical fields.

ACME-III and ACME-IV Final Campaign Reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biraud, S. C.

2016-01-01

The goals of the Atmospheric Radiation Measurement (ARM) Climate Research Facility’s third and fourth Airborne Carbon Measurements (ACME) field campaigns, ACME-III and ACME-IV, are: 1) to measure and model the exchange of CO 2, water vapor, and other greenhouse gases by the natural, agricultural, and industrial ecosystems of the Southern Great Plains (SGP) region; 2) to develop quantitative approaches to relate these local fluxes to the concentration of greenhouse gases measured at the Central Facility tower and in the atmospheric column above the ARM SGP Central Facility, 3) to develop and test bottom-up measurement and modeling approaches to estimate regionalmore » scale carbon balances, and 4) to develop and test inverse modeling approaches to estimate regional scale carbon balance and anthropogenic sources over continental regions. Regular soundings of the atmosphere from near the surface into the mid-troposphere are essential for this research.« less

Incidence of occult athlete's foot in swimmers.

PubMed

Attye, A; Auger, P; Joly, J

1990-09-01

Athlete's foot is a dermatophytic infection frequently found in adults. This disease is, in some cases, asymptomatic. In order to evaluate the incidence of subclinical infection, we obtained 300 toe-web samples from the fourth interdigital space of 150 regular swimmers. More over, 66 specimens from the pool area were analysed. The method used was the carpet technique described by Mariat et al. (10). The fungal isolates were identified according to standard methods. A list of epidemiological data was completed for every swimmer. In our results, 22 swimmers had positive cultures (15%), 8 of these cases had no lesions (36%). They included 7 infections with Trichophyton mentagrophytes (87.5%) and one with T. rubrum (12.5%). We observed one case with a dual infection. Only one sample from the inanimate environment was positive. This study showed a significant incidence of occult athlete's foot in swimmers. To control this endemic problem, adequate preventive measures must be taken.

Teachers' ratings of disruptive behaviors: the influence of halo effects.

PubMed

Abikoff, H; Courtney, M; Pelham, W E; Koplewicz, H S

1993-10-01

This study evaluated the accuracy of teachers' ratings and examined whether these ratings are influenced by halo effects. One hundred thirty-nine elementary school teachers viewed videotapes of what they believed were children in regular fourth-grade classrooms. In fact, the children were actors who followed prepared scripts that depicted a child engaging in behaviors characteristic of an attention-deficit hyperactivity disorder (ADHD), an oppositional defiant disorder or a normal youngster. The findings provide support for a bias that was unidirectional in nature. Specifically, teachers rated hyperactive behaviors accurately when the child behaved like an ADHD youngster. However, ratings of hyperactivity and of ADHD symptomatic behaviors were spuriously inflated when behaviors associated with oppositional defiant disorder occurred. In contrast, teachers rated oppositional and conduct problem behaviors accurately, regardless of the presence of hyperactive behaviors. The implications of these findings regarding diagnostic practices and rating scale formats are discussed.

The All Sky Automated Survey. Catalog of Variable Stars. IV. 18^h-24^h Quarter of the Southern Hemisphere

NASA Astrophysics Data System (ADS)

Pojmanski, G.; Maciejewski, G.

2005-03-01

In this paper we present the fourth part of the photometric data from the 9 arcdeg x 9 arcdeg ASAS camera monitoring the whole southern hemisphere in V-band. Preliminary list (based on observations obtained since January 2001) of variable stars located between RA 18^h and 24^h is released. 10311 stars brighter than V=15 mag were found to be variable (1641 eclipsing, 1116 regularly pulsating, 938 Mira-type and 6616 other stars). Light curves have been classified using the automated algorithm taking into account periods, amplitudes, Fourier coefficients of the light curves, 2MASS colors and IRAS infrared fluxes. Basic photometric properties are presented in the tables and some examples of thumbnail light curves are printed for reference. All photometric data are available over the Internet at http://www.astrouw.edu.pl/~gp/asas/asas.html or http://archive.princeton.edu/~asas

VizieR Online Data Catalog: Stellar populations in the Magellanic bridge (Skowron+, 2014)

NASA Astrophysics Data System (ADS)

Skowron, D. M.; Jacyszyn, A. M.; Udalski, A.; Szymanski, M. K.; Skowron, J.; Poleski, R.; Kozlowski, S.; Kubiak, M.; Pietrzynski, G.; Soszynski, I.; Mroz, P.; Pietrukowicz, P.; Ulaczyk, K.; Wyrzykowski, L.

2017-05-01

The current, fourth phase of the OGLE survey (OGLE-IV) started in 2010 March with the commissioning of a large new-generation 256 Megapixel 32 chip mosaic camera. The Galactic bulge and disk, the Magellanic Clouds, and the Magellanic Bridge, including vast areas around them, are the primary observing targets for the OGLE-IV survey. Regular monitoring of the selected sky regions by the OGLE survey is carried out with the 1.3 m Warsaw telescope located at the Las Campanas Observatory in Chile (operated by the Carnegie Institution for Science). The field of view of the camera is 1.4 deg2 with a pixel size of ~0.26''. The magnitude range of the standard OGLE survey is approximately 12-21 mag in the I band and 12.5-21.5 mag in the V band. (1 data file).

Resveratrol: A potential challenger against gastric cancer

PubMed Central

Zulueta, Aida; Caretti, Anna; Signorelli, Paola; Ghidoni, Riccardo

2015-01-01

Gastric cancer (GC) is the fourth most common cancer and the second leading cause of cancer-related mortality in the world. Late diagnosis and classical therapeutic approaches such as surgery, chemotherapy and radiotherapy make this disease a still threatening tumor. Genetic asset, environmental stress, dietary habit and infections caused by Helicobacter pylori (H. pylori) are the major causes concurring to GC initiation. A common mechanism is induction of radicals resulting in gastric mucosal injury. A regular food intake of antioxidant and radical scavenging agents has been proposed to exert protection against tumorigenesis. Resveratrol belongs to the polyphenol flavonoids class of antioxidants produced by a restricted number of plants. Resveratrol exerts bactericidal activity against H. pylori and is a powerful antioxidant, thus acting as a tumor preventive agent. Resveratrol intracellular signaling results in growth arrest and apoptosis, so that it can be directed against tumor progression. Resveratrol therapeutic potential against GC initiation and progression are reviewed here. PMID:26457023

Routine hand hygiene audit by direct observation: has nemesis arrived?

PubMed

Gould, D J; Drey, N S; Creedon, S

2011-04-01

Infection prevention and control experts have expended valuable health service time developing and implementing tools to audit health workers' hand hygiene compliance by direct observation. Although described as the 'gold standard' approach to hand hygiene audit, this method is labour intensive and may be inaccurate unless performed by trained personnel who are regularly monitored to ensure quality control. New technological devices have been developed to generate 'real time' data, but the cost of installing them and using them during routine patient care has not been evaluated. Moreover, they do not provide as much information about the hand hygiene episode or the context in which hand hygiene has been performed as direct observation. Uptake of hand hygiene products offers an inexpensive alternative to direct observation. Although product uptake would not provide detailed information about the hand hygiene episode or local barriers to compliance, it could be used as a continuous monitoring tool. Regular inspection of the data by infection prevention and control teams and clinical staff would indicate when and where direct investigation of practice by direct observation and questioning of staff should be targeted by highly trained personnel to identify local problems and improve practice. Copyright © 2011 the Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Inferring the Limit Behavior of Some Elementary Cellular Automata

NASA Astrophysics Data System (ADS)

Ruivo, Eurico L. P.; de Oliveira, Pedro P. B.

Cellular automata locally define dynamical systems, discrete in space, time and in the state variables, capable of displaying arbitrarily complex global emergent behavior. One core question in the study of cellular automata refers to their limit behavior, that is, to the global dynamical features in an infinite time evolution. Previous works have shown that for finite time evolutions, the dynamics of one-dimensional cellular automata can be described by regular languages and, therefore, by finite automata. Such studies have shown the existence of growth patterns in the evolution of such finite automata for some elementary cellular automata rules and also inferred the limit behavior of such rules based upon the growth patterns; however, the results on the limit behavior were obtained manually, by direct inspection of the structures that arise during the time evolution. Here we present the formalization of an automatic method to compute such structures. Based on this, the rules of the elementary cellular automata space were classified according to the existence of a growth pattern in their finite automata. Also, we present a method to infer the limit graph of some elementary cellular automata rules, derived from the analysis of the regular expressions that describe their behavior in finite time. Finally, we analyze some attractors of two rules for which we could not compute the whole limit set.

Deformation of the self-adjusting file on simulated curved root canals: a time-dependent study.

PubMed

Akçay, Ilgın; Yiğit-Özer, Senem; Adigüzel, Özkan; Kaya, Sadulah

2011-11-01

This study examined the surface changes of self-adjusting file after operating in different degrees of canal curvatures with a fixed radius of curvature in different operation intervals. Artificial canals were manufactured in a 5-mm radius of curvature with 45° and 60° angles of curvature. Forty self-adjusting files were divided into 2 groups and submitted to functional fatigue to failure. Twenty files were tested using the 45° angle and the remaining 20 were tested using the 60° angle at 4 minutes for 7 periods in a total of 28 minutes. The average time frame for each 4-minute inspection period was considered as the moment of failure at 2, 6, 10, 14, 18, 22, and 26 minutes, respectively. Instruments were evaluated using scanning electron microscopy to characterize the material under study. The lattice detachment began at the second period for both groups and continued to increase along with the ongoing testing time. The detachment that occurred in 60° canal curvature was higher at the third and fourth periods when compared with the 45° group (P < .05). For both groups, during the third period, detachment of the arch of the lattice was only one sided; however, this deformation was severe between the fourth and sixth periods with a 2-sided detachment, which was easier to separate. The rough surface became smooth after usage. No full separation of the file was evident for both groups. In multirooted teeth with severely curved root canals, using more than one self-adjusting file might be recommended to prevent lattice detachment. Copyright © 2011 Mosby, Inc. All rights reserved.

Unexpected series of regular frequency spacing of δ Scuti stars in the non-asymptotic regime - I. The methodology

DOE PAGES

Paparo, M.; Benko, J. M.; Hareter, M.; ...

2016-05-11

In this study, a sequence search method was developed to search the regular frequency spacing in δ Scuti stars through visual inspection and an algorithmic search. We searched for sequences of quasi-equally spaced frequencies, containing at least four members per sequence, in 90 δ Scuti stars observed by CoRoT. We found an unexpectedly large number of independent series of regular frequency spacing in 77 δ Scuti stars (from one to eight sequences) in the non-asymptotic regime. We introduce the sequence search method presenting the sequences and echelle diagram of CoRoT 102675756 and the structure of the algorithmic search. Four sequencesmore » (echelle ridges) were found in the 5–21 d –1 region where the pairs of the sequences are shifted (between 0.5 and 0.59 d –1) by twice the value of the estimated rotational splitting frequency (0.269 d –1). The general conclusions for the whole sample are also presented in this paper. The statistics of the spacings derived by the sequence search method, by FT (Fourier transform of the frequencies), and the statistics of the shifts are also compared. In many stars more than one almost equally valid spacing appeared. The model frequencies of FG Vir and their rotationally split components were used to formulate the possible explanation that one spacing is the large separation while the other is the sum of the large separation and the rotational frequency. In CoRoT 102675756, the two spacings (2.249 and 1.977 d –1) are in better agreement with the sum of a possible 1.710 d –1 large separation and two or one times, respectively, the value of the rotational frequency.« less

The prevalence of foot problems in older women: a cause for concern.

PubMed

Dawson, Jill; Thorogood, Margaret; Marks, Sally-Anne; Juszczak, Ed; Dodd, Chris; Lavis, Grahame; Fitzpatrick, Ray

2002-06-01

Painful feet are an extremely common problem amongst older women. Such problems increase the risk of falls and hamper mobility. The aetiology of painful and deformed feet is poorly understood. Data were obtained during a pilot case-control study about past high heel usage in women, in relation to osteoarthritis of the knee. A total of 127 women aged 50-70 were interviewed (31 cases, 96 controls); case-control sets were matched for age. The following information was obtained about footwear: (1) age when first wore shoes with heels 1, 2 and 3 inches high; (2) height of heels worn for work; (3) maximum height of heels worn regularly for work, going out socially and for dancing, in 10-year age bands. Information about work-related activities and lifetime occupational history was gathered using a Life-Grid. The interview included a foot inspection. Foot problems, particularly foot arthritis, affected considerably more cases than controls (45 per cent versus 16 per cent, p = 0.001) and was considered a confounder. Cases were therefore excluded from subsequent analyses. Amongst controls, the prevalence of any foot problems was very high (83 per cent). All women had regularly worn one inch heels and few (8 per cent) had never worn 2 inch heels. Foot problems were significantly associated with a history of wearing relatively lower heels. Few work activities were related to foot problems; regular lifting was associated with foot pain (p = 0.03). Most women in this age-group have been exposed to high-heeled shoes over many years, making aetiological research difficult in this area. Foot pain and deformities are widespread. The relationship between footwear, occupational activities and foot problems is a complex one that deserves considerably more research.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Upadhyaya, Mihir; Jindal, Vibhu; Basavalingappa, Adarsh

The availability of defect-free masks is considered to be a critical issue for enabling extreme ultraviolet lithography (EUVL) as the next generation technology. Since completely defect-free masks will be hard to achieve, it is essential to have a good understanding of the printability of the native EUV mask defects. In this work, we performed a systematic study of native mask defects to understand the defect printability caused by them. The multilayer growth over native substrate mask blank defects was correlated to the multilayer growth over regular-shaped defects having similar profiles in terms of their width and height. To model themore » multilayer growth over the defects, a novel level-set multilayer growth model was used that took into account the tool deposition conditions of the Veeco Nexus ion beam deposition tool. The same tool was used for performing the actual deposition of the multilayer stack over the characterized native defects, thus ensuring a fair comparison between the actual multilayer growth over native defects, and modeled multilayer growth over regular-shaped defects. Further, the printability of the characterized native defects was studied with the SEMATECH-Berkeley Actinic Inspection Tool (AIT), an EUV mask-imaging microscope at Lawrence Berkeley National Laboratory (LBNL). Printability of the modeled regular-shaped defects, which were propagated up the multilayer stack using level-set growth model was studied using defect printability simulations implementing the waveguide algorithm. Good comparison was observed between AIT and the simulation results, thus demonstrating that multilayer growth over a defect is primarily a function of a defect’s width and height, irrespective of its shape. This would allow us to predict printability of the arbitrarily-shaped native EUV mask defects in a systematic and robust manner.« less

Unexpected series of regular frequency spacing of δ Scuti stars in the non-asymptotic regime - I. The methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paparo, M.; Benko, J. M.; Hareter, M.

In this study, a sequence search method was developed to search the regular frequency spacing in δ Scuti stars through visual inspection and an algorithmic search. We searched for sequences of quasi-equally spaced frequencies, containing at least four members per sequence, in 90 δ Scuti stars observed by CoRoT. We found an unexpectedly large number of independent series of regular frequency spacing in 77 δ Scuti stars (from one to eight sequences) in the non-asymptotic regime. We introduce the sequence search method presenting the sequences and echelle diagram of CoRoT 102675756 and the structure of the algorithmic search. Four sequencesmore » (echelle ridges) were found in the 5–21 d –1 region where the pairs of the sequences are shifted (between 0.5 and 0.59 d –1) by twice the value of the estimated rotational splitting frequency (0.269 d –1). The general conclusions for the whole sample are also presented in this paper. The statistics of the spacings derived by the sequence search method, by FT (Fourier transform of the frequencies), and the statistics of the shifts are also compared. In many stars more than one almost equally valid spacing appeared. The model frequencies of FG Vir and their rotationally split components were used to formulate the possible explanation that one spacing is the large separation while the other is the sum of the large separation and the rotational frequency. In CoRoT 102675756, the two spacings (2.249 and 1.977 d –1) are in better agreement with the sum of a possible 1.710 d –1 large separation and two or one times, respectively, the value of the rotational frequency.« less

Menstrual cycle characteristics in women with persistent schizophrenia.

PubMed

Gleeson, Pia C; Worsley, Roisin; Gavrilidis, Emorfia; Nathoo, Shainal; Ng, Elisabeth; Lee, Stuart; Kulkarni, Jayashri

2016-05-01

Oestradiol has been implicated in the pathogenesis of schizophrenia. Women with schizophrenia often suffer with menstrual dysfunction, usually associated with low oestradiol levels, but whether menstrual dysfunction has an effect on their psychiatric symptoms is not well researched. The aim of this study is to document the menstrual characteristics of women with chronic schizophrenia with focus upon menstrual regularity, menstrual cycle length and menstrual symptoms. To determine which patient characteristics are associated with irregular menses and whether irregular menses are associated with the severity of psychotic symptoms, menstrual symptoms or depressive symptoms. Cross-sectional analyses using baseline data of women enrolled in a clinical trial. Inclusion criteria include Diagnostic and Statistical Manual of Mental Disorders-Fourth Edition, Text Revision diagnosis of schizophrenia, schizoaffective or schizophreniform disorder; aged between 18 and 51 years; residual symptoms of psychosis despite treatment with a stable dose of antipsychotic medication for at least 4 weeks. Menstrual cycle characteristics including regularity, cycle length and menstrual associated symptoms were documented. Symptoms of schizophrenia were measured using Positive and Negative Syndrome Scale, cognition was measured using Repeatable Battery for the Assessment of Neuropsychological Status and depression was assessed using the Montgomery-Asberg Depression Rating Scale. Blood samples were collected at baseline for hormone assays. Of the 139 women, 77 (55.4%) had regular menses, 57 (41%) had irregular menses and 5 (3.6%) women had missing data on their menstrual cycle. Use of atypical antipsychotics associated with hyperprolactinaemia was positively associated with irregular menses (odds ratio = 4.4, 95% confidence interval = [1.8, 10.9], p = 0.001), while age more than 30 years was negatively associated (odds ratio = 0.3, 95% confidence interval = [0.1, 0.6], p = 0.004). Women with irregular cycles had significantly lower oestradiol levels than women with regular cycles (213.2 ± 25.0 vs 299.0 ± 27.3, p = 0.03), but there was no difference in Positive and Negative Syndrome Scale, Montgomery-Asberg Depression Rating Scale or Repeatable Battery for the Assessment of Neuropsychological Status between those with regular and irregular cycles. The most common menstrual associated symptoms were decrease in mood with the menstrual cycle (64.8%), bloating (64.8%), cramps (59.7%), back pain (37.6%) and worsening of psychosis symptoms (32.4%). Regular menses are associated with higher oestradiol levels and higher rates of cyclical mood symptoms but are not associated with Positive and Negative Syndrome Scale scores. Understanding the effect the menstrual cycle can have on psychiatric illness, such as premenstrual exacerbations, is important for the holistic care of women with schizophrenia. © The Royal Australian and New Zealand College of Psychiatrists 2015.

[Swine dysentery eradication in a grower-finisher farm in Switzerland].

PubMed

Speiser, S A; Zeeh, F; Goy, N; Albini, S; Zimmermann, W; Luginbühl, A

2011-01-01

On a Swiss grower-finisher farm blood-tinged-diarrhoea in pigs weighing 40 to 60 kg was observed during several months, resulting in reduced feed efficiency and a prolonged fattening period. As part of a research project, in February 2007 faecal samples were analysed and one diseased pig was euthanised and sent for necropsy where typical gut lesions indicative for a Brachyspira (B.) hyodysenteriae infection were found. B. hyodysenteriae was demonstrated by PCR in 4 out of 5 faecal samples. The pig farm thereafter underwent an eradication process with timed depopulation of the consecutive pigpens. During February to June 2008 the farm was regularly inspected and tested for B. hyodysenterieae. Testing continued for another year after the eradication process and all faecal samples proved negative. Until January 2010 neither diarrhoea with blood nor B. hyodysenterieae reoccurred.

Promoting the safety performance of industrial radiography using a quantitative assessment system.

PubMed

Kardan, M R; Mianji, F A; Rastkhah, N; Babakhani, A; Azad, S Borhan

2006-12-01

The increasing number of industrial radiographers and their considerable occupational exposure has been one of the main concerns of the Iran Nuclear Regulatory Authority (INRA) in recent years. In 2002, a quantitative system of evaluating the safety performance of licensees and a complementary enforcement system was introduced by the National Radiation Protection Department (NRPD). Each parameter of the practice is given a weighting factor according to its importance to safety. Assessment of the licensees is done quantitatively by summing up their scores using prepared tables. Implementing this system of evaluation showed a considerable decrease in deficiencies in the various centres. Tables are updated regularly as a result of findings during the inspections. This system is used in addition to enforcement to promote safety performance and to increase the culture of safety in industrial radiography.

Can Sensors Solve the Deterioration Problems of Public Infrastructure?

NASA Astrophysics Data System (ADS)

Miki, Chitoshi

2014-11-01

Various deteriorations are detected in public infrastructures, such as bridges, viaducts, piers and tunnels and caused fatal accidents in some cases. The possibility of the applications of health monitoring by using sensors is the issues of this lecture. The inspection and diagnosis are essential in the maintenance works which include appropriate rehabilitations and replacements. The introduction of monitoring system may improve accuracy and efficiency of inspection and diagnosis. This seems to be innovation of maintenance, old structures may change smart structures by the installation of nerve network and brain, specifically. Cost- benefit viewpoint is also important point, because of public infrastructures. The modes of deterioration are fatigue, corrosion, and delayed fracture in steel, and carbonization and alkali aggregate reaction in concrete. These are like adult disease in human bodies. The developments of Infrastructures in Japan were concentrated in the 1960th and 1970th. These ages are approaching 50 and deterioration due to aging has been progress gradually. The attacks of earthquakes are also a major issue. Actually, these infrastructures have been supporting economic and social activities in Japan and the deterioration of public infrastructure has become social problems. How to secure the same level of safety and security for all public infrastructures is the challenge we face now. The targets of monitoring are external disturbances such as traffic loads, earthquakes, winds, temperature, responses against external disturbances, and the changes of performances. In the monitoring of infrastructures, 3W1H(WHAT, WHERE, WHEN and HOW) are essential, that is what kind of data are necessary, where sensors place, when data are collected, and how to collect and process data. The required performances of sensors are accuracy, stability for long time. In the case of long term monitoring, the durability of systems needs more than five years, because the interval of regular bridge inspection works are five years. The supply of powers sometimes becomes serious problem. Some case studies will be presented here.

The policy-practice gap: describing discordances between regulation on paper and real-life practices among specialized drug shops in Kenya.

PubMed

Wafula, Francis; Abuya, Timothy; Amin, Abdinasir; Goodman, Catherine

2014-09-16

Specialized drug shops (SDSs) are popular in Sub-Saharan Africa because they provide convenient access to medicines. There is increasing interest in how policymakers can work with them, but little knowledge on how their operation relates to regulatory frameworks. This study sought to describe characteristics and predictors of regulatory practices among SDSs in Kenya. The regulatory framework governing the Kenya pharmaceutical sector was mapped, and a list of regulations selected for inclusion in a survey questionnaire. An SDS census was conducted, and survey data collected from 213 SDSs from two districts in Western Kenya. The majority of SDSs did not comply with regulations, with only 12% having a refrigerator and 22% having a separate dispensing area for instance. Additionally, less than half had at least one staff with pharmacy qualification (46%), with less than a third of all interviewed operators knowing the name of the law governing pharmacy.Regulatory infringement was more common among SDSs in rural locations; those that did not have staff with pharmacy qualifications; and those whose operator did not know the name of the pharmacy law. Compliance was not significantly associated with the frequency of inspections, with over 80% of both rural and urban SDSs reporting an inspection in the past year. While compliance was low overall, it was particularly poor among SDSs operating in rural locations, and those that did not have staff with pharmacy qualification. This suggested the need for policy to introduce levels of practice in recognition of the variations in resource availability. Under such a system, rural SDSs operating in low-resource setting, and selling a limited range of medicines, may be exempted from certain regulatory requirements, as long as their scope of practice is limited to certain essential services only. Future research should also explore why regulatory compliance is poor despite regular inspections.

Availability of Foodborne Illness Reporting Mechanisms for the Public on Local Health Department Web Sites.

PubMed

Harris, Jenine K; Wong, Roger; Matthew, Megan G; Mansour, Raed

Foodborne illness is a serious and preventable public health problem, with high health and economic tolls in the United States. Local governments play an important role in food safety, with local health departments (LHDs) responsible for licensing and inspecting restaurants. Foodborne illness complaints from the public result in identification of more serious and critical food safety violations than regularly scheduled inspections; however, few people report foodborne illness. Availability of existing methods for the public to report foodborne illness to LHDs across the United States was examined. In 2016, data were collected and analyzed from a nationally representative stratified sample of 816 LHDs. Each LHD Web site was examined to determine whether the Web site included a way for constituents to report a suspected foodborne illness. Just 27.6% of LHD Web sites included a way for constituents to report a suspected foodborne illness. LHDs with reporting mechanisms were serving significantly larger populations and had significantly more staff members, higher revenues, and higher expenditures. Health departments with reporting mechanisms were also significantly more likely to conduct environmental health surveillance activities, to regulate, inspect, and/or license food service establishments, and to be involved in food safety policy. Consumer reports of suspected foodborne illness help identify serious and critical food safety violations in food establishments; however, foodborne illness is vastly underreported by the US public. While more evidence is needed on how current systems are working, increasing the visibility and availability of Web-based reporting mechanisms through the following strategies is recommended: (1) test and modify search functions on LHD Web sites to ensure consumers find reporting mechanisms; (2) add a downloadable form as an option for reporting; (3) coordinate with state health departments to ensure clear instructions are available for reporting at both state and local levels; and (4) consider linking directly to state health department reporting mechanisms.

Amplification volume reduction on DNA database samples using FTA™ Classic Cards.

PubMed

Wong, Hang Yee; Lim, Eng Seng Simon; Tan-Siew, Wai Fun

2012-03-01

The DNA forensic community always strives towards improvements in aspects such as sensitivity, robustness, and efficacy balanced with cost efficiency. Therefore our laboratory decided to study the feasibility of PCR amplification volume reduction using DNA entrapped in FTA™ Classic Card and to bring cost savings to the laboratory. There were a few concerns the laboratory needed to address. First, the kinetics of the amplification reaction could be significantly altered. Second, an increase in sensitivity might affect interpretation due to increased stochastic effects even though they were pristine samples. Third, statics might cause FTA punches to jump out of its allocated well into another thus causing sample-to-sample contamination. Fourth, the size of the punches might be too small for visual inspection. Last, there would be a limit to the extent of volume reduction due to evaporation and the possible need of re-injection of samples for capillary electrophoresis. The laboratory had successfully optimized a reduced amplification volume of 10 μL for FTA samples. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

NDE for the 21st century: industry 4.0 requires NDE 4.0 (Conference Presentation)

NASA Astrophysics Data System (ADS)

Meyendorf, Norbert G.

2017-04-01

Industry 4.0 stands for the fourth industrial revolution that is ongoing at present. Industry 4.0 is a terminology preferred used in Europe to characterize the integration of production and communication technologies, the so called "smart factory". The first industrial revolution was the mechanization of work. The second was mass production and the assembly line. While the third revolution was the computer integrated manufacturing. Industry 4.0 encompasses the complete networking of all industrial areas. Lowering costs and efficient in-time production will be possible also for low numbers of very unique parts for example by additive manufacturing (3D printing). A significant aspect is also quality and maintainability of these sometimes unique structures and components. NDE has to follow these trends, not only by adapting NDE techniques to the new technologies, but also introducing the capability of cyber systems into the inspection and maintenance processes. The requirements and challenges for this new technological area will be discussed. Chances for applications of new technologies and systems for NDE will be demonstrated online.

Oviposition behaviour of the soil mite Pergamasus brevicornis (Acari: Parasitidae).

PubMed

Marquardt, Tomasz; Faleńczyk-Koziróg, Katarzyna; Kaczmarek, Sławomir

2013-07-01

We observed the oviposition behaviour of the soil mite Pergamasus brevicornis Berlese (Acari: Parasitidae) using continuous video-monitoring. Oviposition consisted of six sequential phases. The first phase (I) involved inspection of the substrate. In the second phase (II) there were rhythmic movements of the first pair of legs and slight reciprocating movements of the body. The third (III) was a resting phase. In the fourth phase (IV) the gnathosoma was lowered and the body was raised. In the next phase (V) there were two sub-phases. During the first (Va), the female held the egg below the gnathosoma. In the second sub-phase (Vb), the gnathosoma moved up holding the egg, which was then placed on the substrate. The last phase (VI) involved intense 'cleaning' movements of the chelicerae and palps. During Va a protective external eggshell structure is gradually formed, involving a phase where the egg shell is sticky. After moving the egg to the substrate, the female freed her palps and chelicerae from the sticky egg shell and cleaned her gnathosomal appendages. Phases II-V took on average 207 ± 69 s.

Re-inventing NDE as science — How student ideas will help adapt NDE to the new ecosystem of science and technology

NASA Astrophysics Data System (ADS)

Meyendorf, Norbert

2018-04-01

Industry 4.0 stands for the fourth industrial revolution that is ongoing at present. Industry 4.0 is a terminology generally used in Europe to characterize the integration of production and communication technologies, the so called "smart factory". Lowering costs and efficient in-time production will be possible for low numbers of unique parts, for example by additive manufacturing (3D printing). A significant aspect is also quality and maintainability of these sometimes unique structures and components. NDE has to follow these trends, but introduce the capability of cyber systems into the inspection and maintenance processes. The author initiated in his NDE introductory class student projects where small groups of students had to identify everyday problems that can be solved by NDE techniques and suggest technical solutions based on today's technology. The results where exiting. After discussing the ecosystem and the present situation of NDE as a science, several of these ideas were presented. Let us listen to the ideas and needs of the young generation to re-invent NDE!

Ultra-rapid EOP determination with VLBI

NASA Astrophysics Data System (ADS)

Haas, Rüdiger; Kurihara, Shinobu; Nozawa, Kentaro; Hobiger, Thomas; Lovell, Jim; McCallum, Jamie; Quick, Jonathan

2013-04-01

In 2007 the Geospatial information Authority of Japan (GSI) and the Onsala Space Observatory (OSO) started a project aiming at determining the earth rotation angle, usually expressed as dUT1, in near real-time. In the beginning of this project dedicated one hour long one-baseline experiments were observed periodically using the VLBI stations Onsala (Sweden) and Tsukuba (Japan). The strategy is that the observed VLBI-data are sent in real-time via the international optical fibre backbone to the VLBI-correlator at Tsukuba where the data are correlated and analyzed in near-real time, producing ultra-rapid dUT1 results. An offline version of this strategy has been adopted in 2009 for the regular VLBI intensive series INT-2 involving Wettzell (Germany) and Tsukuba. Since March 2010 the INT-2 is using real-time e-transfer, too, and since June 2010 also automated analysis. Starting in 2009 the ultra-rapid approach was applied to regular 24 hour long VLBI-sessions that involve Tsukuba and Onsala, so that ultra-rapid dUT1 results can be produced already during ongoing VLBI-sessions. This strategy was successfully operated during the 15 days long CONT11 campaign. In 2011 the ultra-rapid strategy was extended to involve a network of VLBI-stations, so that not only dUT1 but also the polar motion components can be determined in near real-time. Initially, in November 2011 a dedicated three-station session was observed involving Onsala, Tsukuba and Hobart (Tasmania, Australia). In 2012 several regular 24 hour long IVS-sessions that involved Onsala, Tsukuba and HartRAO (South Africa) were operated with the ultra-rapid strategy, and in several cases also Hobart was added as a fourth station. For this project we use the new analysis software c5++ developed by the National Institute of Information and Communications Technology (NICT). In this presentation we give an overview of the UREOP-project, describe the recent developments, and discuss the obtained results.

Adiposity, lipogenesis, and fatty acid composition of subcutaneous and intramuscular adipose tissues of Brahman and Angus crossbred cattle.

PubMed

Campbell, E M G; Sanders, J O; Lunt, D K; Gill, C A; Taylor, J F; Davis, S K; Riley, D G; Smith, S B

2016-04-01

The objective of this study was to demonstrate differences in aspects of adipose tissue cellularity, lipid metabolism, and fatty and cholesterol composition in Angus and Brahman crossbred cattle. We hypothesized that in vitro measures of lipogenesis would be greater in three-fourths Angus progeny than in three-fourths Brahman progeny, especially in intramuscular (i.m.) adipose tissue. Progeny ( = 227) were fed a standard, corn-based diet for approximately 150 d before slaughter. Breed was considered to be the effect of interest and was forced into the model. There were 9 breed groups including all 4 kinds of three-fourths Angus calves: Angus bulls Angus-sired F cows ( = 32), Angus bulls Brahman-sired F cows ( = 20), Brahman-sired F bulls Angus cows ( = 24), and Angus-sired F bulls Angus cows ( = 20). There were all 4 kinds of three-fourths Brahman calves: Brahman bulls Brahman-sired F cows ( = 21), Brahman bulls Angus-sired F cows ( = 43), Brahman-sired F bulls Brahman cows ( = 26), and Angus-sired F bulls Brahman cows ( = 13). Additionally, F calves (one-half Brahman and one-half Angus) were produced only from Brahman-sired F bulls Angus-sired F cows ( = 28). Contrasts were calculated when breed was an important fixed effect, using the random effect family(breed) as the error term. Most contrasts were nonsignificant ( > 0.10). Those that were significant ( < 0.05) included cholesterol concentration of subcutaneous (s.c.) adipose tissue (three-fourths Angus > F, three-fourths Brahman > F, and three-fourths crossbred progeny combined > F), s.c. adipocyte volume (three-fourths Angus > F and three-fourths bloods combined > F), lipogenesis from acetate in s.c. adipose tissue (three-fourths Brahman calves from Brahman dams > three-fourths Brahman calves from F dams), and percentage 18:3-3 in s.c. adipose tissue (three-fourths Brahman calves from Brahman-sired F dams < three-fourths Brahman calves from Angus-sired F dams). Intramuscular adipocyte volume ( < 0.001) was less in three-fourths Brahman cattle than in three-fourths Angus cattle. Additionally, several differences were observed in i.m. adipose tissue that were consistent with this being a less-developed adipose tissue in three-fourths Brahman cattle than in three-fourths Angus cattle.

Semantic Segmentation of Forest Stands of Pure Species as a Global Optimization Problem

NASA Astrophysics Data System (ADS)

Dechesne, C.; Mallet, C.; Le Bris, A.; Gouet-Brunet, V.

2017-05-01

Forest stand delineation is a fundamental task for forest management purposes, that is still mainly manually performed through visual inspection of geospatial (very) high spatial resolution images. Stand detection has been barely addressed in the literature which has mainly focused, in forested environments, on individual tree extraction and tree species classification. From a methodological point of view, stand detection can be considered as a semantic segmentation problem. It offers two advantages. First, one can retrieve the dominant tree species per segment. Secondly, one can benefit from existing low-level tree species label maps from the literature as a basis for high-level object extraction. Thus, the semantic segmentation issue becomes a regularization issue in a weakly structured environment and can be formulated in an energetical framework. This papers aims at investigating which regularization strategies of the literature are the most adapted to delineate and classify forest stands of pure species. Both airborne lidar point clouds and multispectral very high spatial resolution images are integrated for that purpose. The local methods (such as filtering and probabilistic relaxation) are not adapted for such problem since the increase of the classification accuracy is below 5%. The global methods, based on an energy model, tend to be more efficient with an accuracy gain up to 15%. The segmentation results using such models have an accuracy ranging from 96% to 99%.

Aging effects on vertical graphene nanosheets and their thermal stability

NASA Astrophysics Data System (ADS)

Ghosh, S.; Polaki, S. R.; Ajikumar, P. K.; Krishna, N. G.; Kamruddin, M.

2018-03-01

The present study investigates environmental aging effects and thermal stability of vertical graphene nanosheets (VGN). Self-organized VGN is synthesized by plasma enhanced chemical vapor deposition and exposed to ambient conditions over 6-month period to examine its aging behavior. A systematic inspection is carried out on morphology, chemical structure, wettability and electrical property by scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, water contact angle and four-probe resistivity measurements at regular intervals, respectively. Detailed microscopic and spectroscopic analysis substantiated the retention of graphitic quality and surface chemistry of VGN over the test period. An unchanged sheet resistance and hydrophobicity reveals its electrical and wetting stability over the time, respectively. Thermogravimetric analysis ensures an excellent thermal stability of VGN up to 575 °C in ambient atmosphere. These findings of long-term morphological, structural, wetting, electrical and thermal stability of VGN validate their potential utilization for the next-generation device applications.

Humans Are Still the Critical Factor in Aviation Security.

PubMed

Krüger, Jenny Kathinka; Suchan, Boris

2015-10-01

In Germany, the German Federal Police assess the performance of aviation security screeners on a regular basis. These so-called "reality tests" are unannounced examinations which aim to investigate whether airport screeners can detect forbidden items in hand luggage or attached to the body. Recent alarming results of such inspections showed clearly that the overall detection rate is in need of improvement. To achieve this, it is important to identify specific factors that influence general screening performance. This especially includes basic cognitive functions like visual screening, alertness, and divided attention, which have come more and more into focus in current fundamental research projects. This brief commentary points out critical factors, contributes background conditions in aviation security screening, and shows possible approaches for enhancement and optimization. Finally, the human aspect is discussed as not only being the weakest factor in security screening, but also one of major importance.

An on-line monitoring system for navigation equipment

NASA Astrophysics Data System (ADS)

Wang, Bo; Yang, Ping; Liu, Jing; Yang, Zhengbo; Liang, Fei

2017-10-01

Civil air navigation equipment is the most important infrastructure of Civil Aviation, which is closely related to flight safety. In addition to regular flight inspection, navigation equipment's patrol measuring, maintenance measuring, running measuring under special weather conditions are the important means of ensuring aviation flight safety. According to the safety maintenance requirements of Civil Aviation Air Traffic Control navigation equipment, this paper developed one on-line monitoring system with independent intellectual property rights for navigation equipment, the system breakthroughs the key technologies of measuring navigation equipment on-line including Instrument Landing System (ILS) and VHF Omni-directional Range (VOR), which also meets the requirements of navigation equipment ground measurement set by the ICAO DOC 8071, it provides technical means of the ground on-line measurement for navigation equipment, improves the safety of navigation equipment operation, and reduces the impact of measuring navigation equipment on airport operation.

Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grin, A.; Lstiburek, J.

The goal of this research is to provide durable and long-term water management solutions using exterior insulating sheathing as part of the water management system. It is possible to tape or seal the joints in insulating sheathing to create a drainage plane and even an air control layer. There exists the material durability component of the tape as well as the system durability component being the taped insulating sheathing as the drainage plane. This measure guideline provides best practice and product recommendations from the interviewed contractors and homebuilders who collectively have a vast amount of experience. Three significant issues weremore » discussed with the group, which are required to make taped insulating sheathing a simple, long-term, and durable drainage plane: horizontal joints should be limited or eliminated wherever possible; where a horizontal joint exists use superior materials; and frequent installation inspection and regular trade training are required to maintain proper installation.« less

Research on Operation Assessment Method for Energy Meter

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

2018-03-01

The existing electric energy meter rotation maintenance strategy regularly checks the electric energy meter and evaluates the state. It only considers the influence of time factors, neglects the influence of other factors, leads to the inaccuracy of the evaluation, and causes the waste of resources. In order to evaluate the running state of the electric energy meter in time, a method of the operation evaluation of the electric energy meter is proposed. The method is based on extracting the existing data acquisition system, marketing business system and metrology production scheduling platform that affect the state of energy meters, and classified into error stability, operational reliability, potential risks and other factors according to the influencing factors, based on the above basic test score, inspecting score, monitoring score, score of family defect detection. Then, according to the evaluation model according to the scoring, we evaluate electric energy meter operating state, and finally put forward the corresponding maintenance strategy of rotation.

A Method of Evaluating Operation of Electric Energy Meter

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Li, Tianyang; Cao, Fei; Chu, Pengfei; Zhao, Xinwang; Huang, Rui; Liu, Liping; Zhang, Chenglin

2018-05-01

The existing electric energy meter rotation maintenance strategy regularly checks the electric energy meter and evaluates the state. It only considers the influence of time factors, neglects the influence of other factors, leads to the inaccuracy of the evaluation, and causes the waste of resources. In order to evaluate the running state of the electric energy meter in time, a method of the operation evaluation of the electric energy meter is proposed. The method is based on extracting the existing data acquisition system, marketing business system and metrology production scheduling platform that affect the state of energy meters, and classified into error stability, operational reliability, potential risks and other factors according to the influencing factors, based on the above basic test score, inspecting score, monitoring score, score of family defect detection. Then, according to the evaluation model according to the scoring, we evaluate electric energy meter operating state, and finally put forward the corresponding maintenance strategy of rotation.

Coated carbide drill performance under soluble coconut oil lubricant and nanoparticle enhanced MQL in drilling AISI P20

NASA Astrophysics Data System (ADS)

Jamil, N. A. M.; Azmi, A. I.; Fairuz, M. A.

2016-02-01

This research experimentally investigates the performance of a TiAlN coated carbide drill bit in drilling AISI P20 through two different kinds of lubricants, namely; soluble coconut oil (SCO) and nanoparticle-enhanced coconut oil (NECO) under minimum quantity lubrication system. The tool life and tool wear mechanism were studied using various cutting speeds of 50, 100 and 150 m/min with a constant feed of 0.01 mm/rev. Since the flank wear land was not regular along the cutting edge, the average flank wear (VB) was measured at several points using image analysis software. The drills were inspected using a scanning electron microscope to further elucidate the wear mechanism. The result indicates that drilling with the nanoparticle- enhanced lubricant was better in resisting the wear and improving the drill life to some extent

“Let Me Help You Help Me”: Church-based HIV Prevention for Young Black Men who have Sex with Men

PubMed Central

Powell, Terrinieka W.; Herbert, Ann; Ritchwood, Tiarney D.; Latkin, Carl A.

2016-01-01

The goal of this study was to identify strategies that could yield more inclusive church-based HIV prevention efforts. In-depth interviews were conducted with 30 young Black men who have sex with men (YBMSM) living in Baltimore, Maryland. The sample had an equal number of regular and infrequent church attendees. Nearly one-fourth of the sample was HIV-positive. Interviews were transcribed verbatim and analyzed inductively using a qualitative content analytic approach. Two main recommendations emerged for churches to offer more inclusive HIV prevention efforts: (1) reduce homosexuality stigma by increasing interpersonal and institutional acceptance, and (2) address the sexual health needs of all congregants by offering universal and targeted sexual health promotion. Thus, results support a tiered approached to providing more inclusive church-based HIV prevention efforts. We conclude that Black churches can be a critical access point for HIV prevention among YBMSM and represent an important setting to intervene. PMID:27244189

[Claw size of Scottish Highland Cows after pasture and housing periods].

PubMed

Nuss, K; Kolp, E; Braun, U; Weidmann, E; Hässig, M

2014-09-01

The claws of pastured Scottish Highland Cattle are large and this may raise the question if regular claw trimming is necessary. Therefore, the claws of the right thoracic and pelvic limbs were measured in 22 Scottish Highland cows 4 times 8 weeks apart. The cows were kept on various alpine pastures before the first measurement, on a two-hectare low-land pasture before the second measurement, in a welfare-compliant straw-bedded free stall before the third measurement and on alpine pasture before the fourth measurement. Housing conditions significantly affected claw dimensions. The claws were composed of dry, hard horn during pasture periods, and had prominent weight-bearing hoof-wall borders and soles with a natural axial slope. Long dorsal walls and heels and a greater symmetry were common. Claw lesions were absent. In contrast, free-stall housing was associated with shorter toes and steeper toe angles, but white line deterioration, heel horn erosion, wearing of the axial slope and hoof wall edges were common.

Clinical anatomy e-cases: a five-year follow-up of learning analytics.

PubMed

Perumal, Vivek; Butson, Russell; Blyth, Phil; Daniel, Ben

2017-01-27

This article explores the development and user experiences of a supplementary e-learning resource (clinical anatomy e-cases) for medical students, across a five-year teaching period. A series of online supplementary e-learning resources (the clinical anatomy e-cases) were developed and introduced to the regional and clinical anatomy module of the medicine course. Usage analytics were collected online from a cohort of third-year medical students and analysed to gain a better understanding of how students utilised these resources. Key results showed that the students used the supplementary learning resource during and outside regular teaching hours that includes a significant access during holidays. Analysis also suggested that the resources were frequently accessed during examination periods and during subsequent clinical study years (fourth or fifth years of medicine course). Increasing interest and positive feedback from students has led to the development of a further series of e-cases. Tailor-made e-learning resources promote clinical anatomy learning outside classroom hours and make supplementary learning a 24/7 task.

Land use and land cover digital data from 1:250,000- and 1:100,000- scale maps

USGS Publications Warehouse

,

1990-01-01

The Earth Science Information Centers (ESIC) distribute digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. The data files are grouped into four basic types. The first type, called a Digital Line Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for ground positions that are usually at regularly spaced intervals. The third type, Land Use and Land Cover digital data, provide information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for known places, features, and areas in the United States identified by a proper name.

Digital Elevation Models

USGS Publications Warehouse

,

1993-01-01

The Earth Science Information Center (ESIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is the line map information in digital form. These data files include information on base data categories, such as transportation, hypsography, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions at regularly spaced intervals. The third type is Land Use and Land Cover digital data which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

Digital line graphs from 1:24,000-scale maps

USGS Publications Warehouse

,

1990-01-01

The Earth Science Information Centers (ESIC) distribute digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data flles are grouped into four basic types. The first of these, called a Digital Line . Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions that are usually at regularly spaced intervals. The third type is Land Use and Land Cover digital data, which provides information on nine major classes of land use such as urban, agricultural, or forest as wen as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

Digital line graphs from 1:100,000-scale maps

USGS Publications Warehouse

,

1989-01-01

The National Cartographic Information Center (NCIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second form, called a Digital Elevation Model (OEM), consists of a sampled array of elevations for ground positions that are usually, but not always, at regularly spaced intervals. The third type is Land Use and Land Cover digital data, which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for known places, features, and areas in the United States identified by a proper name.

Miocene Lonchocarpus (Papilionoideae) in San Esteban Tizatlán, Tlaxcala, Mexico

NASA Astrophysics Data System (ADS)

Hernández-Damián, Ana Lilia; Calvillo-Canadell, Laura; Cevallos-Ferriz, Sergio R. S.; Sousa, Mario

2016-03-01

New leaflets from San Esteban Tizatlán, Tlaxcala, Mexico, are described and identified based on their leaf architecture. They have elliptic leaflets with pulvinate petiolule, entire margin, convex apex and base, well developed primary and craspedodromous secondary venation, with decurrent secondary veins with fused the mid-vein, a pair of obtuse basal veins, weak intersecundary veins, mixed percurrent tertiary venation dominated by the opposite type with sinuous course, alternate percurrent fourth-order venation, regular reticulate with few non ramified veinlets. All these characteristics are closely compared with members of sections Obtusifolii and Standleyi of Lonchocarpus (Leguminosae, Papillionoideae, Millettieae), but the mosaic of characters found in the fossil material granted recognition of a new species Lonchocarpus miocenicus sp. nov. This new record of Lonchocarpus from central Mexico further supports the presence of an evergreen tropical forest during the Miocene in the area, a plant community that developed from the Boreotropical Flora and contributed latter to the Neotropical Flora.

National Renewable Energy Laboratory Information Resources Catalogue. A collection of energy efficiency and renewable energy information resources

NASA Astrophysics Data System (ADS)

1994-05-01

NREL's first annual Information Resources Catalogue is intended to inform anyone interested in energy efficiency and renewable energy technologies of NREL's outreach activities, including publications and services. For ease of use, all entries are categorized by subject. The catalogue is separated into six main sections. The first section lists and describes services that are available through NREL and how they may be accessed. The second section contains a list of documents that are published by NREL on a regular or periodic basis. The third section highlights NREL's series publications written for specific audiences and presenting a wide range of subjects. NREL's General Interest Publications constitute the fourth section of the catalogue and are written for nontechnical audiences. Descriptions are provided for these publications. The fifth section contains Technical Reports that detail research and development projects. The section on Conference Papers/Journal Articles/Book Chapters makes up the sixth and final section of the catalogue.

Detector for flow abnormalities in gaseous diffusion plant compressors

DOEpatents

Smith, Stephen F.; Castleberry, Kim N.

1998-01-01

A detector detects a flow abnormality in a plant compressor which outputs a motor current signal. The detector includes a demodulator/lowpass filter demodulating and filtering the motor current signal producing a demodulated signal, and first, second, third and fourth bandpass filters connected to the demodulator/lowpass filter, and filtering the demodulated signal in accordance with first, second, third and fourth bandpass frequencies generating first, second, third and fourth filtered signals having first, second, third and fourth amplitudes. The detector also includes first, second, third and fourth amplitude detectors connected to the first, second, third and fourth bandpass filters respectively, and detecting the first, second, third and fourth amplitudes, and first and second adders connected to the first and fourth amplitude detectors and the second and third amplitude detectors respectively, and adding the first and fourth amplitudes and the second and third amplitudes respectively generating first and second added signals. Finally, the detector includes a comparator, connected to the first and second adders, and comparing the first and second added signals and detecting the abnormal condition in the plant compressor when the second added signal exceeds the first added signal by a predetermined value.

Detector for flow abnormalities in gaseous diffusion plant compressors

DOEpatents

Smith, S.F.; Castleberry, K.N.

1998-06-16

A detector detects a flow abnormality in a plant compressor which outputs a motor current signal. The detector includes a demodulator/lowpass filter demodulating and filtering the motor current signal producing a demodulated signal, and first, second, third and fourth bandpass filters connected to the demodulator/lowpass filter, and filtering the demodulated signal in accordance with first, second, third and fourth bandpass frequencies generating first, second, third and fourth filtered signals having first, second, third and fourth amplitudes. The detector also includes first, second, third and fourth amplitude detectors connected to the first, second, third and fourth bandpass filters respectively, and detecting the first, second, third and fourth amplitudes, and first and second adders connected to the first and fourth amplitude detectors and the second and third amplitude detectors respectively, and adding the first and fourth amplitudes and the second and third amplitudes respectively generating first and second added signals. Finally, the detector includes a comparator, connected to the first and second adders, and comparing the first and second added signals and detecting the abnormal condition in the plant compressor when the second added signal exceeds the first added signal by a predetermined value. 6 figs.

Inline detection of Chrome degradation on binary 193nm photomasks

NASA Astrophysics Data System (ADS)

Dufaye, Félix; Sippel, Astrid; Wylie, Mark; García-Berríos, Edgardo; Crawford, Charles; Hess, Carl; Sartelli, Luca; Pogliani, Carlo; Miyashita, Hiroyuki; Gough, Stuart; Sundermann, Frank; Brochard, Christophe

2013-09-01

193nm binary photomasks are still used in the semiconductor industry for the lithography of some critical layers for the nodes 90nm and 65nm, with high volumes and over long periods. However, these 193nm binary photomasks can be impacted by a phenomenon of chrome oxidation leading to critical dimensions uniformity (CDU) degradation with a pronounced radial signature. If not detected early enough, this CDU degradation may cause defectivity issues and lower yield on wafers. Fortunately, a standard cleaning and repellicle service at the mask shop has been demonstrated as efficient to remove the grown materials and get the photomask CD back on target.Some detection methods have been already described in literature, such as wafer CD intrafield monitoring (ACLV), giving reliable results but also consuming additional SEM time with less precision than direct photomask measurement. In this paper, we propose another approach, by monitoring the CDU directly on the photomask, concurrently with defect inspection for regular requalification to production for wafer fabs. For this study, we focused on a Metal layer in a 90nm technology node. Wafers have been exposed with production conditions and then measured by SEM-CD. Afterwards, this photomask has been measured with a SEM-CD in mask shop and also inspected on a KLA-Tencor X5.2 inspection system, with pixels 125 and 90nm, to evaluate the Intensity based Critical Dimension Uniformity (iCDU) option. iCDU was firstly developed to provide feed-forward CDU maps for scanner intrafield corrections, from arrayed dense structures on memory photomasks. Due to layout complexity and differing feature types, CDU monitoring on logic photomasks used to pose unique challenges.The selection of suitable feature types for CDU monitoring on logic photomasks is no longer an issue, since the transmitted intensity map gives all the needed information, as shown in this paper. In this study, the photomask was heavily degraded after more than 18,000 300mm wafers exposed and the cleaning brought it back almost to its original state after manufacture. Wafer CD, photomask CD and iCDU results can be compared, before and after a standard mask shop cleaning. Measurement points have be chosen in logic areas and SRAM areas, so that their respective behaviours can be studied separately. Transmitted maps before and after cleaning were analysed in terms of CD shift and CDU degradation. The delta map shows a nice correlation with photomask CD shift. iCDU demonstrated the capability to detect a reliable CD range degradation of 5nm on photomask by a comparison between a reference inspection and the current inspection. Die to die inspection mode provides also valuable data, highlighting the degraded chrome sidewalls, more in the photomask centre than on the edges. Ultimately, these results would enable to trigger the preventive cleanings rather than on predefined thresholds. The expected gains for wafer fabs are cost savings (adapted cleanings frequency), increased photomask availability for production, longer photomask lifetime, no additional SEM time neither for photomask nor on wafer.

7 CFR 51.2296 - Three-fourths half kernel.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Three-fourths half kernel. 51.2296 Section 51.2296 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards...-fourths half kernel. Three-fourths half kernel means a portion of a half of a kernel which has more than...

Reproducibility of the School-Based Nutrition Monitoring Questionnaire among Fourth-Grade Students in Texas

ERIC Educational Resources Information Center

Penkilo, Monica; George, Goldy Chacko; Hoelscher, Deanna M.

2008-01-01

Objective: To assess reproducibility of a School-Based Nutrition Monitoring (SBNM) questionnaire for fourth-grade students. Design: Test-retest. Setting: Fourth-grade elementary school classrooms. Participants: Multiethnic fourth-grade students from 2 area school districts (N = 322). Main Outcome Measures: Reproducibility coefficients with time…

An Anatomy of a Seismic Sequence in a Deep Gold Mine

NASA Astrophysics Data System (ADS)

Gibowicz, S. J.

1997-12-01

An unusual swarm-like seismic sequence occurred in April 1993 at the Western Deep Levels gold mine, South Africa. Altogether 199 events with moment magnitude from -0.5 to 3.1 were recorded and located by the mine seismic network. The sequence lasted 12 days and was composed in fact of four main shock-aftershocks sequences, closely following each other in space and time. The events were confined to a volume of rock extending to 670 m in the N-S, 630 m in the E-W, and 390 m in the vertical directions. The first sequence lasted 179 hours and the second only 13 hours, being interrupted by the third sequence which lasted 31 hours, being in turn interrupted by the fourth sequence. The parameter p, describing the rate of occurrence of aftershocks, ranged from 0.7 to 1. The first sequence is characterized by the lowest value of the fractal correlation dimension D = 1.75 and the second by the highest value of D = 2.4, whereas the third and fourth sequences are characterized by the middle value of D = 1.9.¶The corner frequencies of P and S waves are in close proximity and range from 14 to 220 Hz. A display of source parameters as a function of time shows that the four main shocks are most distinctly marked by their source radius. For 46 events a moment tensor inversion was performed. In most cases the double-couple component is dominant, ranging from 60 to 90 percent of the solution. The double-couple solutions correspond to the same number of normal and reverse faults and oblique-slip focal mechanisms. An analysis of space distribution of P, T and B axes reveals that the distribution of B axes is the most regular.

A study of sports-related orbital fractures in Singapore.

PubMed

Lock, Jing Zhan; Hegde, Raghuraj; Young, Stephanie; Lim, Thiam Chye; Amrith, Shantha; Sundar, Gangadhara

2017-10-01

With an increased popularity of sport and active living worldwide, our study aims to explore the incidence and features of sports-related orbital fractures in Singapore. 1421 computer tomography (CT) imaging scans of the face and orbits done at the National University Hospital over a 24-month period from January 2013 and December 2014 were reviewed retrospectively for orbital fractures. We identified 483 orbital fractures of which sports injury was the fourth most common etiology (n = 65; 13.5%) after road traffic accident (n = 131; 27.1%), geriatric fall (n = 81; 16.8%) and workplace injury (n = 67; 13.9%). The three most common sport in orbital fractures were soccer (n = 20; 30.8%), bicycling (n = 11; 16.9%) and jogging (n = 8; 12.3%). The three most common fracture patterns were zygomatico-maxillary complex fractures (n = 24; 36.9%), isolated one wall blowout fractures (n = 19; 29.2%) and naso-orbito-ethmoid fractures (n = 7; 10.8%). Sports-related orbital fractures were associated with a low mean age of patients (45.9 years, range, 14-79 years), a higher proportion of males (n = 58; 89.2%) than that from geriatric falls (n = 37, 45.6%) (P < 0.01), a higher likelihood of unilaterality (n = 62; 95.4%) than that from traffic accidents (n = 99; 75.6%) (P < 0.01) and a lower likelihood of pan-facial involvement (n = 4; 6.15%) than that from traffic accident (n = 60; 45.8%) (P < 0.01). Sports-related orbital fractures are the fourth most common cause of orbital fractures. Though commonly seen in young male adults, in view of the aging population and people exercising more regularly, education of safety measures among sports users is paramount to preventing sports-related orbital fractures.

Effectiveness of a short message reminder in increasing compliance with pediatric cataract treatment: a randomized trial.

PubMed

Lin, Haotian; Chen, Weirong; Luo, Lixia; Congdon, Nathan; Zhang, Xinyu; Zhong, Xiaojian; Liu, Zhaochuan; Chen, Wan; Wu, Changrui; Zheng, Danying; Deng, Daming; Ye, Shaobi; Lin, Zhuoling; Zou, Xia; Liu, Yizhi

2012-12-01

Regular follow-up is essential to successful management of childhood cataract. We sought to assess whether a mobile phone short message service (SMS) for parents of children with cataract could improve follow-up adherence and the proportion of procedures performed in timely fashion. Randomized, controlled trial. This trial is registered with ClinicalTrials.gov, NCT01417819. We included 258 parent-child pairs involved in the Childhood Cataract Program of the Chinese Ministry of Health. Participants were randomized (1:1) to a mobile phone SMS intervention or standard follow-up appointments. All participants were scheduled to attend ≥ 4 follow-up appointments according to the protocol. Parents in the intervention group received SMS automated reminders before scheduled appointments. The control group parents did not receive SMSs or any alternative reminder of scheduled appointments. Regular ocular examinations and analyses were performed by investigators masked to group allocation; however, study participants and the manager in charge of randomization and sending SMSs were not masked. Number of follow-up appointments attended, additional surgeries, laser treatments, changes in eyeglasses prescription, and occurrence of secondary ocular hypertension. Among parent-child participants, 135 were randomly assigned to the SMS intervention and 123 to standard appointments. Attendance rates for the SMS group (first visit, 97.8%; second, 91.9%; third, 92.6%; fourth, 83%) were significantly higher than those for the control group (first visit, 87.8%; second, 69.9%; third, 56.9%; fourth, 33.3%). The increase in attendance rate for total number of follow-up visits with SMS reminders was 47.2% (relative risk [RR] for attendance, 1.47; 95% confidence interval [CI], 1.16-1.78; P = 0.003). The number needed to remind (NNR) to gain 1 additional visit by 1 child was 3 (95% CI, 1.8-4.2). A total of 247 clinical interventions were carried out in the SMS group and 134 in the control group (RR, 1.68; 95% CI, 1.37-1.99; P = 0.007). The NNR to result in 1 additional clinical intervention was 5 (95% CI, 3.5-6.5). The SMS reminders significantly improved follow-up adherence in pediatric cataract treatment. Using readily available mobile phone resources may be an effective and economic strategy to improve management of childhood cataract in China. The authors have no proprietary or commercial interest in any of the materials discussed in this article. Copyright © 2012 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

49 CFR Appendix A to Part 230 - Inspection Requirements

Code of Federal Regulations, 2011 CFR

2011-10-01

.... Inspection of brake cylinders for piston travel. 11. Inspection of foundation brake gear. 12. Inspection of... crossheads and guides. 16. Inspection of piston rods and fasteners. 17. Inspection of main, side, and valve.... Inspection of tender frames and tanks. 21. Inspection of tender trucks for amount of side bearing clearance...

49 CFR Appendix A to Part 230 - Inspection Requirements

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Inspection of brake cylinders for piston travel. 11. Inspection of foundation brake gear. 12. Inspection of... crossheads and guides. 16. Inspection of piston rods and fasteners. 17. Inspection of main, side, and valve.... Inspection of tender frames and tanks. 21. Inspection of tender trucks for amount of side bearing clearance...

49 CFR Appendix A to Part 230 - Inspection Requirements

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Inspection of brake cylinders for piston travel. 11. Inspection of foundation brake gear. 12. Inspection of... crossheads and guides. 16. Inspection of piston rods and fasteners. 17. Inspection of main, side, and valve.... Inspection of tender frames and tanks. 21. Inspection of tender trucks for amount of side bearing clearance...

49 CFR Appendix A to Part 230 - Inspection Requirements

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Inspection of brake cylinders for piston travel. 11. Inspection of foundation brake gear. 12. Inspection of... crossheads and guides. 16. Inspection of piston rods and fasteners. 17. Inspection of main, side, and valve.... Inspection of tender frames and tanks. 21. Inspection of tender trucks for amount of side bearing clearance...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobranich, P.R.; Widney, T.W.; Goolsby, P.T.

The on-site inspection provisions in many current and proposed arms control agreements require extensive preparation and training on the part of both the Inspected Party and the Inspection Team. Current training techniques include table-top inspections and practice inspections. The Augmented Computer Exercise for Inspection Training (ACE-IT), an interactive computer training tool, increases the utility of table-top inspections. ACE-IT has been designed to provide training for a hypothetical challenge inspection under the Chemical Weapons Convention (CWC); however, this training tool can be modified for other inspection regimes. Although ACE-IT provides training from notification of an inspection through post-inspection activities, the primarymore » emphasis of ACE-IT is in the inspection itself--particularly with the concept of managed access. ACE-IT also demonstrates how inspection provisions impact compliance determination and the protection of sensitive information. The Exercise Manual supplements the ACE-IT software by providing general information on on-site inspections and detailed information for the CWC challenge inspection exercise. The detailed information includes the pre-inspection briefing, maps, list of sensitive items, medical records, and shipping records.« less

Machine vision systems using machine learning for industrial product inspection

NASA Astrophysics Data System (ADS)

Lu, Yi; Chen, Tie Q.; Chen, Jie; Zhang, Jian; Tisler, Anthony

2002-02-01

Machine vision inspection requires efficient processing time and accurate results. In this paper, we present a machine vision inspection architecture, SMV (Smart Machine Vision). SMV decomposes a machine vision inspection problem into two stages, Learning Inspection Features (LIF), and On-Line Inspection (OLI). The LIF is designed to learn visual inspection features from design data and/or from inspection products. During the OLI stage, the inspection system uses the knowledge learnt by the LIF component to inspect the visual features of products. In this paper we will present two machine vision inspection systems developed under the SMV architecture for two different types of products, Printed Circuit Board (PCB) and Vacuum Florescent Displaying (VFD) boards. In the VFD board inspection system, the LIF component learns inspection features from a VFD board and its displaying patterns. In the PCB board inspection system, the LIF learns the inspection features from the CAD file of a PCB board. In both systems, the LIF component also incorporates interactive learning to make the inspection system more powerful and efficient. The VFD system has been deployed successfully in three different manufacturing companies and the PCB inspection system is the process of being deployed in a manufacturing plant.

Sexual and reproductive healthcare utilization among women aged 40 to 49 in rural China.

PubMed

Sun, Xiaoming; Sun, Yu; Zong, Zhanhong; Shu, Xingyu; Mao, Jingshu; Hearst, Norman

2016-10-01

China's national family planning system is mainly directed toward women of early reproductive ages. Most studies of service provision focused on younger women, who almost all receive regular examinations. Little is known about service-seeking behavior among women of late reproductive ages. This cross-sectional household survey interviewed 1,811 rural women aged 40 to 49 in seven provinces. We examined sexual and reproductive health, utilization of sexual and reproductive health services, and predictors of receiving a free gynecological examination in the past 2 years. Educational levels were not high, and most women were rural farmers or housewives. More than one-fourth had migrated for work to big cities when they were younger. The mean frequency of sex in the last month was 3.6 times. Approximately 22.7% of women had not received a gynecological examination and 31.2% had not received any health education during the past 2 years. The first choice for where to seek services was township medical facilities (58.4%). On multivariate regression, age, education, migrant working experience, awareness of the need for intrauterine device removal after menopause, health education received, and attitude toward health examinations were significantly associated with receiving a gynecological examination in the past 2 years. Women of late reproductive age in rural China are not receiving as regular care as younger women. This study identifies sociodemographic and health service correlates for service-seeking behavior, many of which are modifiable. Health services should pay greater attention to this group, including community-based efforts to encourage routine examinations and appropriate use of health services.

Using virtual reality to test the regularity priors used by the human visual system

NASA Astrophysics Data System (ADS)

Palmer, Eric; Kwon, TaeKyu; Pizlo, Zygmunt

2017-09-01

Virtual reality applications provide an opportunity to test human vision in well-controlled scenarios that would be difficult to generate in real physical spaces. This paper presents a study intended to evaluate the importance of the regularity priors used by the human visual system. Using a CAVE simulation, subjects viewed virtual objects in a variety of experimental manipulations. In the first experiment, the subject was asked to count the objects in a scene that was viewed either right-side-up or upside-down for 4 seconds. The subject counted more accurately in the right-side-up condition regardless of the presence of binocular disparity or color. In the second experiment, the subject was asked to reconstruct the scene from a different viewpoint. Reconstructions were accurate, but the position and orientation error was twice as high when the scene was rotated by 45°, compared to 22.5°. Similarly to the first experiment, there was little difference between monocular and binocular viewing. In the third experiment, the subject was asked to adjust the position of one object to match the depth extent to the frontal extent among three objects. Performance was best with symmetrical objects and became poorer with asymmetrical objects and poorest with only small circular markers on the floor. Finally, in the fourth experiment, we demonstrated reliable performance in monocular and binocular recovery of 3D shapes of objects standing naturally on the simulated horizontal floor. Based on these results, we conclude that gravity, horizontal ground, and symmetry priors play an important role in veridical perception of scenes.

Quantification of chaotic strength and mixing in a micro fluidic system

NASA Astrophysics Data System (ADS)

Kim, Ho Jun; Beskok, Ali

2007-11-01

Comparative studies of five different techniques commonly employed to identify the chaotic strength and mixing efficiency in micro fluidic systems are presented to demonstrate the competitive advantages and shortcomings of each method. The 'chaotic electroosmotic stirrer' of Qian and Bau (2002 Anal. Chem. 74 3616-25) is utilized as the benchmark case due to its well-defined flow kinematics. Lagrangian particle tracking methods are utilized to study particle dispersion in the conceptual device using spectral element and fourth-order Runge-Kutta discretizations in space and time, respectively. Stirring efficiency is predicted using the stirring index based on the box counting method, and Poincaré sections are utilized to identify the chaotic and regular regions under various actuation conditions. Finite time Lyapunov exponents are calculated to quantify the chaotic strength, while the probability density function of the stretching field is utilized as an alternative method to demonstrate the statistical analysis of chaotic and partially chaotic cases. Mixing index inverse, based on the standard deviation of scalar species distribution, is utilized as a metric to quantify the mixing efficiency. Series of numerical simulations are performed by varying the Peclet number (Pe) at fixed kinematic conditions. The mixing time (tm) is characterized as a function of the Pe number, and tm ~ ln(Pe) scaling is demonstrated for fully chaotic cases, while tm ~ Peα scaling with α ≈ 0.33 and α = 0.5 are observed for partially chaotic and regular cases, respectively. Employing the aforementioned techniques, optimum kinematic conditions and the actuation frequency of the stirrer that result in the highest mixing/stirring efficiency are identified.

Suicidal ideation and its determinants in Korean adults: The role of physical activity and functional limitations.

PubMed

Park, S M

2015-01-01

The recognition of suicide as a major public health problem has suggested the need to identify risk factors that have implications for preventive intervention. In the suicidal process, suicidal ideation is a key stage in the pathway leading to eventual suicide. This study investigated the influence of physical activity and functional limitations on suicidal ideation among young and middle-aged adults in a high suicidal society. Data for the current study were obtained from the Fourth Korea National Health and Nutrition Examination Survey 2007-2009 (KNHANES), a cross-sectional study conducted by the Korea Centers for Disease Control and Prevention. The survey conducted face-to-face interviews with young adults (n = 2326) and middle-aged adults (n = 3396). Using multivariate logistic regression analysis, the relationship of physical activity and functional limitations with suicidal ideation in young and middle-aged adults was assessed. A notable outcome was that the absence of a regular walking was correlated with increased suicidal ideation in middle-aged women. The other major finding was that young women and middle-aged adults with functional limitations had a high rate of suicidal thoughts. Multiple intervention approaches, including informational, social and behavioural approaches, are needed to promote regular walking in middle-aged women. For instance, mass media campaigns, community walking groups and individually adapted health behaviour modification may provide opportunities for positive intervention. Additionally, another important public health implication from these findings is the need for a suicide-intervention support system that includes screening for suicide risk in healthcare settings, especially among young women with physical limitations.

Visual statistical learning is not reliably modulated by selective attention to isolated events

PubMed Central

Musz, Elizabeth; Weber, Matthew J.; Thompson-Schill, Sharon L.

2014-01-01

Recent studies of visual statistical learning (VSL) indicate that the visual system can automatically extract temporal and spatial relationships between objects. We report several attempts to replicate and extend earlier work (Turk-Browne et al., 2005) in which observers performed a cover task on one of two interleaved stimulus sets, resulting in learning of temporal relationships that occur in the attended stream, but not those present in the unattended stream. Across four experiments, we exposed observers to a similar or identical familiarization protocol, directing attention to one of two interleaved stimulus sets; afterward, we assessed VSL efficacy for both sets using either implicit response-time measures or explicit familiarity judgments. In line with prior work, we observe learning for the attended stimulus set. However, unlike previous reports, we also observe learning for the unattended stimulus set. When instructed to selectively attend to only one of the stimulus sets and ignore the other set, observers could extract temporal regularities for both sets. Our efforts to experimentally decrease this effect by changing the cover task (Experiment 1) or the complexity of the statistical regularities (Experiment 3) were unsuccessful. A fourth experiment using a different assessment of learning likewise failed to show an attentional effect. Simulations drawing random samples our first three experiments (n=64) confirm that the distribution of attentional effects in our sample closely approximates the null. We offer several potential explanations for our failure to replicate earlier findings, and discuss how our results suggest limiting conditions on the relevance of attention to VSL. PMID:25172196

Prototypic and Arkypallidal Neurons in the Dopamine-Intact External Globus Pallidus

PubMed Central

Abdi, Azzedine; Mallet, Nicolas; Mohamed, Foad Y.; Sharott, Andrew; Dodson, Paul D.; Nakamura, Kouichi C.; Suri, Sana; Avery, Sophie V.; Larvin, Joseph T.; Garas, Farid N.; Garas, Shady N.; Vinciati, Federica; Morin, Stéphanie; Bezard, Erwan

2015-01-01

Studies in dopamine-depleted rats indicate that the external globus pallidus (GPe) contains two main types of GABAergic projection cell; so-called “prototypic” and “arkypallidal” neurons. Here, we used correlative anatomical and electrophysiological approaches in rats to determine whether and how this dichotomous organization applies to the dopamine-intact GPe. Prototypic neurons coexpressed the transcription factors Nkx2-1 and Lhx6, comprised approximately two-thirds of all GPe neurons, and were the major GPe cell type innervating the subthalamic nucleus (STN). In contrast, arkypallidal neurons expressed the transcription factor FoxP2, constituted just over one-fourth of GPe neurons, and innervated the striatum but not STN. In anesthetized dopamine-intact rats, molecularly identified prototypic neurons fired at relatively high rates and with high regularity, regardless of brain state (slow-wave activity or spontaneous activation). On average, arkypallidal neurons fired at lower rates and regularities than prototypic neurons, and the two cell types could be further distinguished by the temporal coupling of their firing to ongoing cortical oscillations. Complementing the activity differences observed in vivo, the autonomous firing of identified arkypallidal neurons in vitro was slower and more variable than that of prototypic neurons, which tallied with arkypallidal neurons displaying lower amplitudes of a “persistent” sodium current important for such pacemaking. Arkypallidal neurons also exhibited weaker driven and rebound firing compared with prototypic neurons. In conclusion, our data support the concept that a dichotomous functional organization, as actioned by arkypallidal and prototypic neurons with specialized molecular, structural, and physiological properties, is fundamental to the operations of the dopamine-intact GPe. PMID:25926446

9 CFR 381.76 - Post-mortem inspection, when required; extent; traditional, Streamlined Inspection System (SIS...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Post-mortem inspection, when required... INSPECTION REGULATIONS Post Mortem Inspection; Disposition of Carcasses and Parts § 381.76 Post-mortem...) Inspection System and the New Turkey Inspection (NTI) System; rate of inspection. (a) A post-mortem...

9 CFR 381.76 - Post-mortem inspection, when required; extent; traditional, Streamlined Inspection System (SIS...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Post-mortem inspection, when required... INSPECTION REGULATIONS Post Mortem Inspection; Disposition of Carcasses and Parts § 381.76 Post-mortem...) Inspection System and the New Turkey Inspection (NTI) System; rate of inspection. (a) A post-mortem...

9 CFR 381.76 - Post-mortem inspection, when required; extent; traditional, Streamlined Inspection System (SIS...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Post-mortem inspection, when required... INSPECTION REGULATIONS Post Mortem Inspection; Disposition of Carcasses and Parts § 381.76 Post-mortem...) Inspection System and the New Turkey Inspection (NTI) System; rate of inspection. (a) A post-mortem...

9 CFR 381.76 - Post-mortem inspection, when required; extent; traditional, Streamlined Inspection System (SIS...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Post-mortem inspection, when required... INSPECTION REGULATIONS Post Mortem Inspection; Disposition of Carcasses and Parts § 381.76 Post-mortem...) Inspection System and the New Turkey Inspection (NTI) System; rate of inspection. (a) A post-mortem...

UNEXPECTED SERIES OF REGULAR FREQUENCY SPACING OF δ SCUTI STARS IN THE NON-ASYMPTOTIC REGIME. I. THE METHODOLOGY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paparó, M.; Benkő, J. M.; Hareter, M.

A sequence search method was developed to search the regular frequency spacing in δ Scuti stars through visual inspection and an algorithmic search. We searched for sequences of quasi-equally spaced frequencies, containing at least four members per sequence, in 90 δ Scuti stars observed by CoRoT . We found an unexpectedly large number of independent series of regular frequency spacing in 77 δ Scuti stars (from one to eight sequences) in the non-asymptotic regime. We introduce the sequence search method presenting the sequences and echelle diagram of CoRoT 102675756 and the structure of the algorithmic search. Four sequences (echelle ridges)more » were found in the 5–21 d{sup −1} region where the pairs of the sequences are shifted (between 0.5 and 0.59 d{sup −1}) by twice the value of the estimated rotational splitting frequency (0.269 d{sup −1}). The general conclusions for the whole sample are also presented in this paper. The statistics of the spacings derived by the sequence search method, by FT (Fourier transform of the frequencies), and the statistics of the shifts are also compared. In many stars more than one almost equally valid spacing appeared. The model frequencies of FG Vir and their rotationally split components were used to formulate the possible explanation that one spacing is the large separation while the other is the sum of the large separation and the rotational frequency. In CoRoT 102675756, the two spacings (2.249 and 1.977 d{sup −1}) are in better agreement with the sum of a possible 1.710 d{sup −1} large separation and two or one times, respectively, the value of the rotational frequency.« less

75 FR 35649 - Safety Zone; Fourth of July Fireworks, Lake Tahoe, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... Zone; Fourth of July Fireworks, Lake Tahoe, CA AGENCY: Coast Guard, DHS. ACTION: Notice of enforcement of regulation. SUMMARY: The Coast Guard will enforce the Fourth of July Fireworks safety zone from 9... Fourth of July Fireworks Display in 33 CFR 165.1191 on July 3, 2010. The fireworks launch site is...

76 FR 37646 - Safety Zone; Northern California Annual Fireworks Events, Fourth of July Fireworks, Lake Tahoe, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... Zone; Northern California Annual Fireworks Events, Fourth of July Fireworks, Lake Tahoe, CA AGENCY... annual safety zone for the Fourth of July Fireworks, Lake Tahoe, California, located off Incline Village...,000 foot safety zone for the annual Fourth of July Fireworks Display in 33 CFR 165.1191 on July 4...

9 CFR 354.121 - Ante-mortem inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... he may issue from time to time, be made of rabbits on the day of slaughter in any official plant... INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Inspection Procedures; Ante-Mortem Inspections § 354.121 Ante-mortem inspection. An ante-mortem inspection of rabbits...

9 CFR 354.121 - Ante-mortem inspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... he may issue from time to time, be made of rabbits on the day of slaughter in any official plant... INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Inspection Procedures; Ante-Mortem Inspections § 354.121 Ante-mortem inspection. An ante-mortem inspection of rabbits...

Students teaching students: evaluation of a "near-peer" teaching experience.

PubMed

Naeger, David M; Conrad, Miles; Nguyen, Janet; Kohi, Maureen P; Webb, Emily M

2013-09-01

Teaching is an important skill. Academic physicians teach on a daily basis, and nearly all physicians occasionally teach colleagues and patients. There are generally few opportunities for medical students to learn teaching skills. We developed a novel "near-peer" teaching program in which fourth-year students cotaught first-year students. Eighteen fourth-year students enrolled in our institution's primary senior radiology elective learned the basics of ultrasound through a series of lectures and hands-on scanning sessions. Each fourth-year student, paired with a radiology resident or attending, then cotaught a first-year anatomy small group session. After instruction, voluntary surveys were administered to assess the perceived value of the "near-peer" teaching experience. Seventeen of 18 (94%) and 104 of 120 (87%) administered surveys were returned by fourth- and first-year students, respectively. Sixteen (94%) and 99 (95%) of the fourth- and first-year students reported they "enjoyed" or "really enjoyed" the near-peer teaching experience. Fourteen (82%) of the fourth years perceived improvement in their teaching skills and an increase in their knowledge. Only 8 (47%) of the fourth years thought they were "helpful" or "very helpful," though 92 (88%) of the first years identified their fourth-year co-instructors as "helpful" or "very helpful." We piloted a novel "near-peer" program. Both senior and freshman students enjoyed the experience, and fourth years thought the session was educational for them as well. Although most fourth years did not judge themselves as helpful, first-year students overwhelmingly considered them a useful addition to the session. Copyright © 2013 AUR. Published by Elsevier Inc. All rights reserved.

46 CFR 153.812 - Inspection for Certificate of Inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Inspection for Certificate of Inspection. 153.812... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Testing and Inspection § 153.812 Inspection for Certificate of Inspection. The rules governing the...

46 CFR 167.15-10 - Application for annual inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... NAUTICAL SCHOOL SHIPS Inspections § 167.15-10 Application for annual inspection. Application in writing for the annual inspection of every nautical school ship required to be inspected by law and the... Inspection, at any local Marine Inspection Office, U.S. Coast Guard, where the nautical school ship may be...

7 CFR 57.925 - Inspection of imported eggs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Inspection of imported eggs. 57.925 Section 57.925... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) INSPECTION OF EGGS (EGG PRODUCTS INSPECTION ACT) Regulations Governing the Inspection of Eggs Imports § 57.925 Inspection of...

7 CFR 57.925 - Inspection of imported eggs.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Inspection of imported eggs. 57.925 Section 57.925... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) INSPECTION OF EGGS (EGG PRODUCTS INSPECTION ACT) Regulations Governing the Inspection of Eggs Imports § 57.925 Inspection of...

78 FR 39597 - Safety Zone; Hilton Fourth of July Fireworks, San Joaquin River, Venice Island, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... Zone; Hilton Fourth of July Fireworks, San Joaquin River, Venice Island, CA AGENCY: Coast Guard, DHS... the Hilton Fourth of July Fireworks in the Captain of the Port, San Francisco area of responsibility...'' W (NAD83) for the Hilton Fourth of July Fireworks in 33 CFR 165.1191, Table 1, Item number 17. This...

Fourth Grade Factory--An Integrated, Collaborative Unit in Manufacturing and Economics--Make It, Take It.

ERIC Educational Resources Information Center

Bliss, Clifford; Giles, Bob

This unit for fourth grade and high school includes elements of careers, economics and free enterprise for fourth graders and elements of problem solving and design, manufacturing, drafting, and woodworking for high school students. The unit is taught in both the fourth grade and the high school classrooms. The unit involves planning, designing,…

Defect inspection and printability study for 14 nm node and beyond photomask

NASA Astrophysics Data System (ADS)

Seki, Kazunori; Yonetani, Masashi; Badger, Karen; Dechene, Dan J.; Akima, Shinji

2016-10-01

Two different mask inspection techniques are developed and compared for 14 nm node and beyond photomasks, High resolution and Litho-based inspection. High resolution inspection is the general inspection method in which a 19x nm wavelength laser is used with the High NA inspection optics. Litho-based inspection is a new inspection technology. This inspection uses the wafer lithography information, and as such, this method has automatic defect classification capability which is based on wafer printability. Both High resolution and Litho-based inspection methods are compared using 14 nm and 7 nm node programmed defect and production design masks. The defect sensitivity and mask inspectability is compared, in addition to comparing the defect classification and throughput. Additionally, the Cost / Infrastructure comparison is analyzed and the impact of each inspection method is discussed.

Evaluating Heuristics for Planning Effective and Efficient Inspections

NASA Technical Reports Server (NTRS)

Shull, Forrest J.; Seaman, Carolyn B.; Diep, Madeline M.; Feldmann, Raimund L.; Godfrey, Sara H.; Regardie, Myrna

2010-01-01

A significant body of knowledge concerning software inspection practice indicates that the value of inspections varies widely both within and across organizations. Inspection effectiveness and efficiency can be measured in numerous ways, and may be affected by a variety of factors such as Inspection planning, the type of software, the developing organization, and many others. In the early 1990's, NASA formulated heuristics for inspection planning based on best practices and early NASA inspection data. Over the intervening years, the body of data from NASA inspections has grown. This paper describes a multi-faceted exploratory analysis performed on this · data to elicit lessons learned in general about conducting inspections and to recommend improvements to the existing heuristics. The contributions of our results include support for modifying some of the original inspection heuristics (e.g. Increasing the recommended page rate), evidence that Inspection planners must choose between efficiency and effectiveness, as a good tradeoff between them may not exist, and Identification of small subsets of inspections for which new inspection heuristics are needed. Most Importantly, this work illustrates the value of collecting rich data on software Inspections, and using it to gain insight into, and Improve, inspection practice.

Roofing research and standards development: Fourth volume. ASTM special technical publication 1349

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wallace, T.J.; Rossiter, W.J. Jr.

1999-07-01

As the roofing industry has stabilized, a broad variety of roof systems have found general acceptance by the building owners, architects, engineers, contractors, and others who select and install roofs. These roof systems include those based on conventional built-up membranes using glass and synthetic reinforcements, synthetic polymeric membranes using elastomers and thermoplastics, polymer-modified membranes, and sprayed polyurethane foam. ASTM Committee D8 on Roofing, Waterproofing, and Bituminous Materials has contributed significantly in many important ways to the roofing community's stabilization including issuing standard specifications to assist consumers in the selection and use of these systems. This is not surprising, as itmore » has always been among the purpose of D8 to provide standards to assist in the selection and use of low-sloped and steep roofing. The Committee's scope includes development of standards associated with application, inspection, maintenance, and analyses. Some of the issues facing the roofing community today--for example, enhanced system durability, better methods of material characterization, environmental impact, recycling of materials and systems, industry conversation to the S.I. system metric--readily fall within D8's scope. The availability of sound standard can contribute to the resolution of many of these issues.« less

Advanced manufacturing development of a composite empennage component for L-1011 aircraft

NASA Technical Reports Server (NTRS)

Alva, T.; Henkel, J.; Johnson, R.; Carll, B.; Jackson, A.; Mosesian, B.; Brozovic, R.; Obrien, R.; Eudaily, R.

1982-01-01

This is the final report of technical work conducted during the fourth phase of a multiphase program having the objective of the design, development and flight evaluation of an advanced composite empennage component manufactured in a production environment at a cost competitive with those of its metal counterpart, and at a weight savings of at least 20 percent. The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes front and rear spars. During Phase 4 of the program, production quality tooling was designed and manufactured to produce three sets of covers, ribs, spars, miscellaneous parts, and subassemblies to assemble three complete ACVF units. Recurring and nonrecurring cost data were compiled and documented in the updated producibility/design to cost plan. Nondestruct inspections, quality control tests, and quality acceptance tests were performed in accordance with the quality assurance plan and the structural integrity control plan. Records were maintained to provide traceability of material and parts throughout the manufacturing development phase. It was also determined that additional tooling would not be required to support the current and projected L-1011 production rate.

The Inspiring Science Education project and the resources for HEP analysis by university students

NASA Astrophysics Data System (ADS)

Fassouliotis, Dimitris; Kourkoumelis, Christine; Vourakis, Stylianos

2016-11-01

The Inspiring Science Education outreach project has been running for more than two years, creating a large number of inquiry based educational resources for high-school teachers and students. Its goal is the promotion of science education in schools though new methods built on the inquiry based education techniques, involving large consortia of European partners and implementation of large-scale pilots in schools. Recent hands-on activities, developing and testing the above mentioned innovative applications are reviewed. In general, there is a lack for educational scenaria and laboratory courses earmarked for more advanced, namely university, students. At the University of Athens for the last four years, the HYPATIA on-line event analysis tool has been used as a lab course for fourth year undergraduate physics students, majoring in HEP. Up to now, the course was limited to visual inspection of a few tens of ATLAS events. Recently the course was enriched with additional analysis exercises, which involve large samples of events. The students through a user friendly interface can analyse the samples and optimize the cut selection in order to search for new physics. The implementation of this analysis is described.

9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New Turkey...

9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New Turkey...

9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New Turkey...

9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New Turkey...

9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New Turkey...

Affordable housing and health: a health impact assessment on physical inspection frequency.

PubMed

Klein, Elizabeth G; Keller, Brittney; Hood, Nancy; Holtzen, Holly

2015-01-01

To characterize the prevalence of health-related housing quality exposure for the vulnerable populations that live in affordable housing. Retrospective cross-sectional study. Affordable housing properties in Ohio inspected between 2007 and 2011. Stratified random sample of physical inspection reports (n = 370), including a case study of properties receiving multiple inspections (n = 35). Health-related housing factors, including mold, fire hazard, and others. The majority of affordable housing property inspections (85.1%) included at least 1 health-related housing quality issue. The prevalence of specific health-related violations was varied, with appliance and plumbing issues being the most common, followed by fire, mold, and pest violations. Across funding agencies, the actual implementation of inspection protocols differed. The majority of physical inspections identified housing quality issues that have the potential to impact human health. If the frequency of physical inspections is reduced as a result of inspection alignment, the most health protective inspection protocol should be selected for funding agency inspections; a standardized physical inspection tool is recommended to improve the consistency of inspection findings between mandatory physical inspections in order to promote optimum tenant health.

An analysis of OSHA inspections assessing contaminant exposures in general medical and surgical hospitals.

PubMed

Knight, Jordan L; Sleeth, Darrah K; Larson, Rodney R; Pahler, Leon F

2013-04-01

This study analyzed data from the Occupational Safety and Health Administration's (OSHA) Chemical Exposure Health Database to assess contaminant exposures in general medical and surgical hospitals. Seventy-five inspections conducted in these hospitals from 2005 through 2009 were identified. Five categories of inspections were conducted, the three most common being complaint-based, planned, and referral-based inspections. Complaint-based inspections comprised the majority of inspections-55 (73%) of the 75 conducted. The overall violation rate for all inspection types was 68%. This finding was compared to the violation rates of planned inspections (100%), referral-based inspections (83%), and complaint-based inspections (62%). Asbestos was the hazardous substance most commonly sampled and cited by OSHA in hospitals, with 127 samples collected during 24 inspections; 31% of the total 75 inspections resulting in one or more violations were due to asbestos. Copyright 2013, SLACK Incorporated.

Analysis of ground-water data for selected wells near Holloman Air Force Base, New Mexico, 1950-95

USGS Publications Warehouse

Huff, G.F.

1996-01-01

Ground-water-level, ground-water-withdrawal, and ground- water-quality data were evaluated for trends. Holloman Air Force Base is located in the west-central part of Otero County, New Mexico. Ground-water-data analyses include assembly and inspection of U.S. Geological Survey and Holloman Air Force Base data, including ground-water-level data for public-supply and observation wells and withdrawal and water-quality data for public-supply wells in the area. Well Douglas 4 shows a statistically significant decreasing trend in water levels for 1972-86 and a statistically significant increasing trend in water levels for 1986-90. Water levels in wells San Andres 5 and San Andres 6 show statistically significant decreasing trends for 1972-93 and 1981-89, respectively. A mixture of statistically significant increasing trends, statistically significant decreasing trends, and lack of statistically significant trends over periods ranging from the early 1970's to the early 1990's are indicated for the Boles wells and wells near the Boles wells. Well Boles 5 shows a statistically significant increasing trend in water levels for 1981-90. Well Boles 5 and well 17S.09E.25.343 show no statistically significant trends in water levels for 1990-93 and 1988-93, respectively. For 1986-93, well Frenchy 1 shows a statistically significant decreasing trend in water levels. Ground-water withdrawal from the San Andres and Douglas wells regularly exceeded estimated ground-water recharge from San Andres Canyon for 1963-87. For 1951-57 and 1960-86, ground-water withdrawal from the Boles wells regularly exceeded total estimated ground-water recharge from Mule, Arrow, and Lead Canyons. Ground-water withdrawal from the San Andres and Douglas wells and from the Boles wells nearly equaled estimated ground- water recharge for 1989-93 and 1986-93, respectively. For 1987- 93, ground-water withdrawal from the Escondido well regularly exceeded estimated ground-water recharge from Escondido Canyon, and ground-water withdrawal from the Frenchy wells regularly exceeded total estimated ground-water recharge from Dog and Deadman Canyons. Water-quality samples were collected from selected Douglas, San Andres, and Boles public-supply wells from December 1994 to February 1995. Concentrations of dissolved nitrate show the most consistent increases between current and historical data. Current concentrations of dissolved nitrate are greater than historical concentrations in 7 of 10 wells.

78 FR 39597 - Safety Zone; “Lights on the Lake” Fourth of July Fireworks, South Lake Tahoe, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... Zone; ``Lights on the Lake'' Fourth of July Fireworks, South Lake Tahoe, CA AGENCY: Coast Guard, DHS... the ``Lights on the Lake'' Fourth of July Fireworks display, South Lake Tahoe, CA in the Captain of...) for the ``Lights on the Lake'' Fourth of July Fireworks, South Lake Tahoe, CA in 33 CFR 165.1191...

Identifying the Gaps of Fourth Year Degree Pre-Service Teachers' Pedagogical Content Knowledge in Teaching Engineering Graphics and Design

ERIC Educational Resources Information Center

Khoza, Samuel Dumazi

2017-01-01

Engineering Graphics and Design is a technological subject which is offered in the Bachelor of Education degree from third to fourth year of the degree course. Fourth year pre-service teachers find EGD difficult to teach because of various reasons. Therefore the aim of the paper was to investigate fourth year pre-service teachers' pedagogical…

9 CFR 590.920 - Importer to make application for inspection of imported eggs and egg products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... inspection of imported eggs and egg products. 590.920 Section 590.920 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Imports § 590.920 Importer to make application for inspection of...

46 CFR 71.20-20 - Specific tests and inspections.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false Specific tests and inspections. 71.20-20 Section 71.20-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS INSPECTION AND CERTIFICATION Initial Inspection § 71.20-20 Specific tests and inspections. The applicable tests and inspections relating to annual inspection as se...

46 CFR 71.20-20 - Specific tests and inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 3 2011-10-01 2011-10-01 false Specific tests and inspections. 71.20-20 Section 71.20-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS INSPECTION AND CERTIFICATION Initial Inspection § 71.20-20 Specific tests and inspections. The applicable tests and inspections relating to annual inspection as se...

9 CFR 590.920 - Importer to make application for inspection of imported eggs and egg products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... inspection of imported eggs and egg products. 590.920 Section 590.920 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Imports § 590.920 Importer to make application for inspection of...

Implications of Natural Occlusion of Ventilated Racks on Ammonia and Sanitation Practices

PubMed Central

Creamer, Michelle A; Petty, Joann; Martin, Tara; Bergdall, Valerie; Hickman-Davis, Judy M

2014-01-01

Examination of ventilated rat racks prior to semiannual sanitation revealed silicone nozzles and ventilation ports that were partially or completely occluded with granular debris. We subsequently sought to document performance standards for rack sanitation and investigate the effect of ventilation port occlusion on rack function and animal husbandry practices. We hypothesized that individually ventilated cages with occluded airflow would require more frequent cage changes, comparable to those for static cages (that is, every 3 to 4 d). Sprague–Dawley rats were housed under one of 4 conditions: no airflow occlusion, occluded air-supply inlet, occluded air-exhaust outlet, and occlusion of both inlet and outlet. Cages were changed when daily ammonia concentration exceeded 20 ppm or after 14 d had elapsed. Most cages with unoccluded or partial airflow occlusion remained below the 20 ppm limit until day 12 or 13. Cages with occlusion of both inlet and outlet exceeded 20 ppm ammonia by as early as day 5. Airflow was significantly lower in cages with occlusion of both inlet and outlet airflow. Weekly inspection revealed that occlusion of ventilation ports was detectable by 3 mo after semiannual sanitation. This study demonstrates that silicone nozzles should be removed prior to rack sanitation to improve the effectiveness of cleaning ventilation ports and nozzles. While the rack is in use, silicone nozzles and ventilation ports should be inspected regularly to identify occlusion that is likely to diminish environmental quality in the cage. Intracage ammonia levels are significantly higher when both inlet and outlet airflow are occluded. PMID:24602544

Implications of natural occlusion of ventilated racks on ammonia and sanitation practices.

PubMed

Creamer, Michelle A; Petty, Joann; Martin, Tara; Bergdall, Valerie; Hickman-Davis, Judy M

2014-03-01

Examination of ventilated rat racks prior to semiannual sanitation revealed silicone nozzles and ventilation ports that were partially or completely occluded with granular debris. We subsequently sought to document performance standards for rack sanitation and investigate the effect of ventilation port occlusion on rack function and animal husbandry practices. We hypothesized that individually ventilated cages with occluded airflow would require more frequent cage changes, comparable to those for static cages (that is, every 3 to 4 d). Sprague-Dawley rats were housed under one of 4 conditions: no airflow occlusion, occluded air-supply inlet, occluded air-exhaust outlet, and occlusion of both inlet and outlet. Cages were changed when daily ammonia concentration exceeded 20 ppm or after 14 d had elapsed. Most cages with unoccluded or partial airflow occlusion remained below the 20 ppm limit until day 12 or 13. Cages with occlusion of both inlet and outlet exceeded 20 ppm ammonia by as early as day 5. Airflow was significantly lower in cages with occlusion of both inlet and outlet airflow. Weekly inspection revealed that occlusion of ventilation ports was detectable by 3 mo after semiannual sanitation. This study demonstrates that silicone nozzles should be removed prior to rack sanitation to improve the effectiveness of cleaning ventilation ports and nozzles. While the rack is in use, silicone nozzles and ventilation ports should be inspected regularly to identify occlusion that is likely to diminish environmental quality in the cage. Intracage ammonia levels are significantly higher when both inlet and outlet airflow are occluded.

7 CFR 29.39 - Permissive inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Permissive inspection. 29.39 Section 29.39 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.39 Permissive inspection. Inspection authorized under section 6 of...

7 CFR 29.39 - Permissive inspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Permissive inspection. 29.39 Section 29.39 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.39 Permissive inspection. Inspection authorized under section 6 of...

78 FR 9 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-02

... AD adds repetitive inspections for cracking using different inspection methods and inspecting... cracking using different inspection methods and would inspect additional areas, and corrective actions if... an acceptable method for accomplishing the inspections in areas covered by non-terminating repairs as...

46 CFR 169.255 - Sanitary inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for certification...

46 CFR 169.255 - Sanitary inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Sanitary inspection. 169.255 Section 169.255 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.255 Sanitary inspection. At each inspection for certification...

46 CFR 169.237 - Inspection standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for compliance...

46 CFR 169.237 - Inspection standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Inspection standards. 169.237 Section 169.237 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Inspection and Certification Inspections § 169.237 Inspection standards. Vessels are inspected for compliance...

9 CFR 381.108 - Official poultry inspection certificates; issuance and disposition.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Official poultry inspection... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS...

Software Formal Inspections Guidebook

NASA Technical Reports Server (NTRS)

1993-01-01

The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

The LAMOST Complete Spectroscopic Survey of Pointing Area (LaCoSSPAr) in the Southern Galactic Cap. I. The Spectroscopic Redshift Catalog

NASA Astrophysics Data System (ADS)

Yang, Ming; Wu, Hong; Yang, Fan; Lam, Man I.; Cao, Tian-Wen; Wu, Chao-Jian; Zhao, Pin-Song; Zhang, Tian-Meng; Zhou, Zhi-Min; Wu, Xue-Bing; Zhang, Yan-Xia; Shao, Zheng-Yi; Jing, Yi-Peng; Shen, Shi-Yin; Zhu, Yi-Nan; Du, Wei; Lei, Feng-Jie; He, Min; Jin, Jun-Jie; Shi, Jian-Rong; Zhang, Wei; Wang, Jian-Ling; Wu, Yu-Zhong; Zhang, Hao-Tong; Luo, A.-Li; Yuan, Hai-Long; Bai, Zhong-Rui; Kong, Xu; Gu, Qiu-Sheng; Zhou, Xu; Ma, Jun; Hu, Zou; Nie, Jun-Dan; Wang, Jia-Li; Zhang, Yong; Hou, Yong-Hui; Zhao, Yong-Heng

2018-01-01

We present a spectroscopic redshift catalog from the LAMOST Complete Spectroscopic Survey of Pointing Area (LaCoSSPAr) in the Southern Galactic Cap (SGC), which is designed to observe all sources (Galactic and extragalactic) by using repeating observations with a limiting magnitude of r=18.1 {mag} in two 20 {\\deg }2 fields. The project is mainly focusing on the completeness of LAMOST ExtraGAlactic Surveys (LEGAS) in the SGC, the deficiencies of source selection methods, and the basic performance parameters of the LAMOST telescope. In both fields, more than 95% of galaxies have been observed. A post-processing has been applied to the LAMOST 1D spectrum to remove the majority of remaining sky background residuals. More than 10,000 spectra have been visually inspected to measure the redshift by using combinations of different emission/absorption features with an uncertainty of {σ }z/(1+z)< 0.001. In total, 1528 redshifts (623 absorption and 905 emission line galaxies) in Field A and 1570 redshifts (569 absorption and 1001 emission line galaxies) in Field B have been measured. The results show that it is possible to derive redshift from low S/N galaxies with our post-processing and visual inspection. Our analysis also indicates that up to one-fourth of the input targets for a typical extragalactic spectroscopic survey might be unreliable. The multi-wavelength data analysis shows that the majority of mid-infrared-detected absorption (91.3%) and emission line galaxies (93.3%) can be well separated by an empirical criterion of W2-W3=2.4. Meanwhile, a fainter sequence paralleled to the main population of galaxies has been witnessed both in M r /W2-W3 and M */W2-W3 diagrams, which could be the population of luminous dwarf galaxies but contaminated by the edge-on/highly inclined galaxies (∼ 30 % ).

Manufacturing an advanced process characterization reticle incorporating halftone biasing

NASA Astrophysics Data System (ADS)

Nakagawa, Kent H.; Van Den Broeke, Douglas J.; Chen, J. Fung; Laidig, Thomas L.; Wampler, Kurt E.; Caldwell, Roger F.

1999-04-01

As the semiconductor roadmap continues to require imaging of smaller feature son wafers, we continue to explore new approaches in OPC strategies to extend the lifespan of existing technology. In this paper, we study a new OPC technology, called halftone biasing, and its application on an OPC characterization reticle, designed by MicroUnity Systems Engineering, Inc. The RTP9 test reticle is the latest in a series of 'LineSweeper' characterization reticles. Each reticle contains a wide range of line width sand pitches, each with several alternative OPC treatments, including references cases, scattering bars, and fine biasing. One of RTP9's design requirements was to support very fine, incremental biases for densely-pitched lines. Ordinarily, this would dictate a reduced address unit and with it the costly penalty of a square-law increase in e- beam write time. RTP9 incorporates a new OPC strategy, called halftone biasing, which has been proposed to address this problem. Taking advantage of optical reduction printing, this technique applies a sub-resolution halftone screen to the edges of figures to accomplish fine biasing equivalent to using an address unit one-fourth of the size of the actual e-beam writing grid. The resulting edge structure has some of the characteristics of aggressive OPC structures, but can be used in areas where traditional scattering bars cannot be placed. The trade-off between the faster write times achieved and the inflation of pattern file size is examined. The manufacturability and inspectability of halftone-biased lines on the RTP9 test reticle are explored. Pattern fidelity is examined using both optical and SEM tools. Printed 0.18 micrometers DUV resist line edge profiles are compared for both halftone and non- halftone feature edges. The CD uniformity of the OPC features, and result of die-to-database inspection are reported. The application of halftone biasing to real circuits, including the impact of data volume and saved write time, is also discussed.

The "fourth disease" of childhood: reevaluation of a nonexistent disease.

PubMed

Morens, D M; Katz, A R

1991-09-15

Observed and described between 1884 and 1900, "fourth disease" (Dukes disease) followed measles, scarlet fever, and rubella as the fourth clinically characterized childhood exanthem. Like rubella ("third disease") and erythema infectiosum ("fifth disease"), accepted by the medical community at about the same time, the existence of fourth disease was initially controversial. Over the following decades descriptions of hundreds of cases, outbreaks, and laboratory studies were published in the indexed medical literature. Unlike rubella and fifth disease, however, fourth disease was not subsequently proven to exist by either epidemiologic criteria or isolation of an etiologic agent. By the 1930s, it was infrequently recognized and by the 1960s had been dropped from textbooks. In this study, the authors use epidemiologic methods to reevaluate published data on English schoolchildren from 1892 to 1900 upon which the original fourth disease claim of Dukes was based. The authors conclude that fourth disease never existed. Reinterpretation of the original data suggests that cases can be completely explained as misdiagnosed rubella and scarlet fever. Misidentification of fourth disease is attributed to failures in the critical abilities of the medical and scientific communities at the time. The implications of erroneously identifying a nonexistent disease suggest that modern scientific approaches to disease identification are sound.

Perspective of the Graduating Medical Student: The Ideal Curriculum for the Fourth Year of Undergraduate Medical Education.

PubMed

Andrews, Mary A; Paolino, Nathalie D; DeZee, Kent J; Hemann, Brian

2016-11-01

To explore medical students' perspective regarding the fourth year of medical school and common educational activities thereof. The authors surveyed students graduating in 2012 with a military service obligation about the importance of common fourth-year activities, the proportion of the fourth year devoted to these activities, and important considerations for the fourth-year curriculum. The authors calculated mean importance scores for educational activities and mean proportions of the fourth year that should be devoted to certain activities. Two reviewers independently coded free-text answers to identify and calculate frequencies for common themes. The response rate was 40% (376/942). Participants rated activities related to improving clinical skills and securing the residency of their choice as more than activities such as learning business skills, conducting research, and studying basic sciences. Participants indicated that electives and direct patient care should comprise the majority of the fourth year and frequently mentioned improving specialty-specific clinical skills, pursuing personal medical interests, and taking time to relax as important fourth-year themes. Students value activities related to securing and succeeding in their chosen residency and the opportunity to pursue electives and take vacation. Faculty should consider the student perspective when reforming curricula. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

Physiotherapy Maneuver Is Critical to Recover Mouth Opening After Pediatric Trauma.

PubMed

Khalifa, Ghada Amin; El-Kilani, Naglaa Shawki; Shokier, Hanan Mohamed

2016-12-01

A restricted mouth opening (MO) is predominantly a complication of maxillofacial trauma in pediatric patients and develops in 4 to 26.2% of cases. The purpose of the present study was to quantitatively investigate the influence of patient demographic data, fracture characteristics, and regular vigorous physiotherapy, with either voluntary or forcible MO exercises, on the recovery of a post-traumatic restricted MO in pediatric patients. A prospective cohort study was performed of pediatric patients with maxillofacial injuries who had been referred to Al-Zahraa and El-Fayoum Hospitals from 2013 to 2015. The predictive variables were patient demographic data, fracture characteristics, and regular vigorous physiotherapy. The patients were treated with a closed technique. The MO measurements were the clinical outcome variables and were recorded at the first week and then monthly for 12 months. Regular vigorous physiotherapy was performed until the patients had returned to their preoperative MO. The data were tabulated and statistically analyzed. Eighty-six patients were enrolled in the present study. Males predominated. Falls were the most common cause of fracture. Condylar fractures had the greatest incidence. A restricted MO occurred in 81 patients. The results showed no interaction between MO recovery and age, gender, etiology, or fracture site. After physiotherapy, the patients had returned to their preoperative MO at the fourth month, with the measurements fixed at normal values at the sixth month. The recovery rate was nonlinear, with faster improvement in the months closest to the injury. Physiotherapy is more critical in the recovery of the MO and prevention of bony ankylosis than patient data or fracture characteristics in pediatric trauma. We highly advocate the performance of voluntary mouth exercises, even in the absence of fracture. Forcible MO exercises are mandatory to recover a restricted MO. These exercises should be performed under close supervision of the patient's surgeon with the parents motivated to cooperate for at least 6 months. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

46 CFR 164.012-13 - Examinations, tests, and inspections.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Examinations, tests, and inspections. 164.012-13 Section...-13 Examinations, tests, and inspections. (a) Manufacturer's inspection and tests. Manufacturers of... upon request. (b) Laboratory inspection and tests. Such examinations, inspections and tests as are...

In-service inspection methods for graphite-epoxy structures on commercial transport aircraft

NASA Technical Reports Server (NTRS)

Phelps, M. L.

1981-01-01

In-service inspection methods for graphite-epoxy composite structures on commercial transport aircraft are determined. Graphite/epoxy structures, service incurred defects, current inspection practices and concerns of the airline and manufacturers, and other related information were determind by survey. Based on this information, applicable inspection nondestructive inspection methods are evaluated and inspection techniques determined. Technology is developed primarily in eddy current inspection.

Final Environmental Assessment: Proposed Composite Aircraft Inspection Facilities, Hill Air Force Base, Utah

DTIC Science & Technology

2008-10-02

radiography . Two large inspection bays would each accommodate one F-22 aircraft and robotic x-ray inspection equipment. Six smaller bays would accommodate...large aircraft components (two ultrasonic inspection bays, two laser shearography inspection bays, and two digital radiography inspection bays...Hill Air Force Base, Utah Final Environmental Assessment: Proposed Composite Aircraft Inspection Facilities, Hill Air Force Base, Utah

9 CFR 592.400 - Who may request an appeal inspection or review of an inspection program employee's decision.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Who may request an appeal inspection or review of an inspection program employee's decision. 592.400 Section 592.400 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Appeals § 592.400...

9 CFR 592.400 - Who may request an appeal inspection or review of an inspection program employee's decision.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Who may request an appeal inspection or review of an inspection program employee's decision. 592.400 Section 592.400 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Appeals § 592.400...

9 CFR 592.400 - Who may request an appeal inspection or review of an inspection program employee's decision.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Who may request an appeal inspection or review of an inspection program employee's decision. 592.400 Section 592.400 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Appeals § 592.400...

9 CFR 592.400 - Who may request an appeal inspection or review of an inspection program employee's decision.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Who may request an appeal inspection or review of an inspection program employee's decision. 592.400 Section 592.400 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Appeals § 592.400...

21 CFR 524.770 - Doramectin.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Indications for use. For treatment and control of gastrointestinal roundworms: Ostertagia ostertagi (adults... (adults), Haemonchus placei (adults and fourth-stage larvae), Trichostrongylus axei (adults and fourth-stage larvae), Trichostrongylus colubriformis (adults and fourth-stage larvae), Cooperia oncophora...

21 CFR 524.770 - Doramectin.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Indications for use. For treatment and control of gastrointestinal roundworms: Ostertagia ostertagi (adults... (adults), Haemonchus placei (adults and fourth-stage larvae), Trichostrongylus axei (adults and fourth-stage larvae), Trichostrongylus colubriformis (adults and fourth-stage larvae), Cooperia oncophora...

Robotic NDE inspection of advanced solid rocket motor casings

NASA Technical Reports Server (NTRS)

Mcneelege, Glenn E.; Sarantos, Chris

1994-01-01

The Advanced Solid Rocket Motor program determined the need to inspect ASRM forgings and segments for potentially catastrophic defects. To minimize costs, an automated eddy current inspection system was designed and manufactured for inspection of ASRM forgings in the initial phases of production. This system utilizes custom manipulators and motion control algorithms and integrated six channel eddy current data acquisition and analysis hardware and software. Total system integration is through a personal computer based workcell controller. Segment inspection demands the use of a gantry robot for the EMAT/ET inspection system. The EMAT/ET system utilized similar mechanical compliancy and software logic to accommodate complex part geometries. EMAT provides volumetric inspection capability while eddy current is limited to surface and near surface inspection. Each aspect of the systems are applicable to other industries, such as, inspection of pressure vessels, weld inspection, and traditional ultrasonic inspection applications.

76 FR 24713 - Cooperative Inspection Programs: Interstate Shipment of Meat and Poultry Products

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

...The Food Safety and Inspection Service (FSIS) is amending the Federal meat and poultry products inspection regulations to establish a new voluntary cooperative program under which State-inspected establishments with 25 or fewer employees will be eligible to ship meat and poultry products in interstate commerce. In participating States, State-inspected establishments selected to take part in this program will be required to comply with all Federal standards under the Federal Meat Inspection Act (FMIA) and the Poultry Products Inspection Act (PPIA). These establishments will receive inspection services from State inspection personnel that have been trained in the enforcement of the FMIA and PPIA. Meat and poultry products produced under the program that have been inspected and passed by designated State personnel will bear an official Federal mark of inspection and will be permitted to be distributed in interstate commerce. FSIS will provide oversight and enforcement of the program.

Efficiency improvement by navigated safety inspection involving visual clutter based on the random search model.

PubMed

Sun, Xinlu; Chong, Heap-Yih; Liao, Pin-Chao

2018-06-25

Navigated inspection seeks to improve hazard identification (HI) accuracy. With tight inspection schedule, HI also requires efficiency. However, lacking quantification of HI efficiency, navigated inspection strategies cannot be comprehensively assessed. This work aims to determine inspection efficiency in navigated safety inspection, controlling for the HI accuracy. Based on a cognitive method of the random search model (RSM), an experiment was conducted to observe the HI efficiency in navigation, for a variety of visual clutter (VC) scenarios, while using eye-tracking devices to record the search process and analyze the search performance. The results show that the RSM is an appropriate instrument, and VC serves as a hazard classifier for navigation inspection in improving inspection efficiency. This suggests a new and effective solution for addressing the low accuracy and efficiency of manual inspection through navigated inspection involving VC and the RSM. It also provides insights into the inspectors' safety inspection ability.

9 CFR 352.7 - Marking inspected products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE..., the inspection mark applied to inspected and passed exotic animal carcasses, meat or meat food... abbreviations shall have the same force and effect as the inspection mark. The inspection mark or approved...

9 CFR 352.7 - Marking inspected products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE..., the inspection mark applied to inspected and passed exotic animal carcasses, meat or meat food... abbreviations shall have the same force and effect as the inspection mark. The inspection mark or approved...

9 CFR 352.7 - Marking inspected products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE..., the inspection mark applied to inspected and passed exotic animal carcasses, meat or meat food... abbreviations shall have the same force and effect as the inspection mark. The inspection mark or approved...

7 CFR 868.63 - Certificating appeal inspection results.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 7 2012-01-01 2012-01-01 false Certificating appeal inspection results. 868.63... Certificating appeal inspection results. (a) General. An appeal inspection certificate shall be issued according... results of the appeal inspection or Board appeal inspection service shall be shown on the appeal...

7 CFR 868.63 - Certificating appeal inspection results.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Certificating appeal inspection results. 868.63... Certificating appeal inspection results. (a) General. An appeal inspection certificate shall be issued according... results of the appeal inspection or Board appeal inspection service shall be shown on the appeal...

7 CFR 868.63 - Certificating appeal inspection results.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 7 2014-01-01 2014-01-01 false Certificating appeal inspection results. 868.63... Certificating appeal inspection results. (a) General. An appeal inspection certificate shall be issued according... results of the appeal inspection or Board appeal inspection service shall be shown on the appeal...

7 CFR 868.63 - Certificating appeal inspection results.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Certificating appeal inspection results. 868.63... Certificating appeal inspection results. (a) General. An appeal inspection certificate shall be issued according... results of the appeal inspection or Board appeal inspection service shall be shown on the appeal...

7 CFR 868.63 - Certificating appeal inspection results.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 7 2013-01-01 2013-01-01 false Certificating appeal inspection results. 868.63... Certificating appeal inspection results. (a) General. An appeal inspection certificate shall be issued according... results of the appeal inspection or Board appeal inspection service shall be shown on the appeal...

9 CFR 354.141 - Issuance and disposition of rabbits inspection certificates.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Issuance and disposition of rabbits... PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Inspection Certificates § 354.141 Issuance and disposition of rabbits inspection...

9 CFR 354.141 - Issuance and disposition of rabbits inspection certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Issuance and disposition of rabbits... PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Inspection Certificates § 354.141 Issuance and disposition of rabbits inspection...

Error Sources in Proccessing LIDAR Based Bridge Inspection

NASA Astrophysics Data System (ADS)

Bian, H.; Chen, S. E.; Liu, W.

2017-09-01

Bridge inspection is a critical task in infrastructure management and is facing unprecedented challenges after a series of bridge failures. The prevailing visual inspection was insufficient in providing reliable and quantitative bridge information although a systematic quality management framework was built to ensure visual bridge inspection data quality to minimize errors during the inspection process. The LiDAR based remote sensing is recommended as an effective tool in overcoming some of the disadvantages of visual inspection. In order to evaluate the potential of applying this technology in bridge inspection, some of the error sources in LiDAR based bridge inspection are analysed. The scanning angle variance in field data collection and the different algorithm design in scanning data processing are the found factors that will introduce errors into inspection results. Besides studying the errors sources, advanced considerations should be placed on improving the inspection data quality, and statistical analysis might be employed to evaluate inspection operation process that contains a series of uncertain factors in the future. Overall, the development of a reliable bridge inspection system requires not only the improvement of data processing algorithms, but also systematic considerations to mitigate possible errors in the entire inspection workflow. If LiDAR or some other technology can be accepted as a supplement for visual inspection, the current quality management framework will be modified or redesigned, and this would be as urgent as the refine of inspection techniques.

7 CFR 301.92-11 - Inspection and sampling protocols.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Inspection and sampling protocols. 301.92-11 Section... Inspection and sampling protocols. Type(s) of plants in the nursery Type(s) of plants shipped interstate... interstate. (1) Annual inspection, sampling, and testing—(i) Inspection. The nursery must be inspected...

7 CFR 301.92-11 - Inspection and sampling protocols.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Inspection and sampling protocols. 301.92-11 Section... Inspection and sampling protocols. Type(s) of plants in the nursery Type(s) of plants shipped interstate... interstate. (1) Annual inspection, sampling, and testing—(i) Inspection. The nursery must be inspected...

24 CFR 3282.362 - Production Inspection Primary Inspection Agencies (IPIAs).

Code of Federal Regulations, 2010 CFR

2010-04-01

... in production which fails to conform to the design or where the design is not specific, to the... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Production Inspection Primary... REGULATIONS Primary Inspection Agencies § 3282.362 Production Inspection Primary Inspection Agencies (IPIAs...

7 CFR 927.60 - Inspection and certification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... WASHINGTON Order Regulating Handling Inspection § 927.60 Inspection and certification. (a) Handlers shall ship only fresh pears inspected by the Federal-State Inspection Service or under a program developed by... 7 Agriculture 8 2010-01-01 2010-01-01 false Inspection and certification. 927.60 Section 927.60...

7 CFR 800.156 - Official inspection records.

Code of Federal Regulations, 2011 CFR

2011-01-01

... performed the inspection. (b) Inspection logs. The record of an official inspection service for grain in a combined lot and shiplot shall include the official inspection log as prescribed in the instructions. The original copy of each inspection log shall be retained by the agency or field office that performed the...

9 CFR 590.402 - Egg products inspection certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Egg products inspection certificates... AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Certificates § 590.402 Egg products inspection certificates. (a) Upon request of the applicant or the Service...

9 CFR 590.40 - Continuous inspection not provided.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Eggs and Egg Products Not Intended for Human Food § 590.40 Continuous inspection not provided. Continuous inspection shall not be provided under this part at any plant for the processing of any egg products which...

9 CFR 590.24 - Egg products plants requiring continuous inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Egg products plants requiring..., DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Scope of Inspection § 590.24 Egg products plants requiring continuous inspection. No plant in...

9 CFR 590.660 - Inspection of exempted plants.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inspection of exempted plants. 590.660 Section 590.660 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Exempted Egg...

7 CFR 800.156 - Official inspection records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... performed the inspection. (b) Inspection logs. The record of an official inspection service for grain in a combined lot and shiplot shall include the official inspection log as prescribed in the instructions. The original copy of each inspection log shall be retained by the agency or field office that performed the...

7 CFR 1924.9 - Inspection of development work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 12 2011-01-01 2011-01-01 false Inspection of development work. 1924.9 Section 1924.9... Inspection of development work. The following policies will govern the inspection of all development work. (a... practicable, will make final inspection of all development work and periodic inspections as appropriate to...

9 CFR 592.650 - Inspection.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Inspection. 592.650 Section 592.650 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Sanitary and Processing Requirements § 592.650 Inspection. Examinations of the ingredients,...

9 CFR 592.650 - Inspection.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Inspection. 592.650 Section 592.650 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG PRODUCTS INSPECTION VOLUNTARY INSPECTION OF EGG PRODUCTS Sanitary and Processing Requirements § 592.650 Inspection. Examinations of the ingredients,...