Evaluating Documents: The Case of Patient Package Inserts. Technical Report No. 2.

ERIC Educational Resources Information Center

Krug, Robert E.

To illustrate the types of factors that must be considered in evaluating public documents, this paper analyzes a number of possible outcomes resulting from one type of document, the patient package insert (PPI) designed to provide consumers of prescription drugs with information about the drugs. It first outlines the intended sequence for a PPI:…

The SeaDAS Processing and Analysis System: SeaWiFS, MODIS, and Beyond

NASA Astrophysics Data System (ADS)

MacDonald, M. D.; Ruebens, M.; Wang, L.; Franz, B. A.

2005-12-01

The SeaWiFS Data Analysis System (SeaDAS) is a comprehensive software package for the processing, display, and analysis of ocean data from a variety of satellite sensors. Continuous development and user support by programmers and scientists for more than a decade has helped to make SeaDAS the most widely used software package in the world for ocean color applications, with a growing base of users from the land and sea surface temperature community. Full processing support for past (CZCS, OCTS, MOS) and present (SeaWiFS, MODIS) sensors, and anticipated support for future missions such as NPP/VIIRS, enables end users to reproduce the standard ocean archive product suite distributed by NASA's Ocean Biology Processing Group (OBPG), as well as a variety of evaluation and intermediate ocean, land, and atmospheric products. Availability of the processing algorithm source codes and a software build environment also provide users with the tools to implement custom algorithms. Recent SeaDAS enhancements include synchronization of MODIS processing with the latest code and calibration updates from the MODIS Calibration Support Team (MCST), support for all levels of MODIS processing including Direct Broadcast, a port to the Macintosh OS X operating system, release of the display/analysis-only SeaDAS-Lite, and an extremely active web-based user support forum.

48 CFR 552.211-75 - Preservation, Packaging and Packing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Preservation, Packaging....211-75 Preservation, Packaging and Packing. As prescribed in 511.204(b)(2), insert the following clause: Preservation, Packaging, and Packing (FEB 1996) Unless otherwise specified, all items shall be...

48 CFR 852.214-73 - Alternate packaging and packing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Alternate packaging and....214-73 Alternate packaging and packing. As prescribed in 814.201-6(b)(3), insert the following provision: Alternate Packaging and Packing (JAN 2008) The bidder's offer must clearly indicate the quantity...

A High-Q Resonant Pressure Microsensor with Through-Glass Electrical Interconnections Based on Wafer-Level MEMS Vacuum Packaging

PubMed Central

Luo, Zhenyu; Chen, Deyong; Wang, Junbo; Li, Yinan; Chen, Jian

2014-01-01

This paper presents a high-Q resonant pressure microsensor with through-glass electrical interconnections based on wafer-level MEMS vacuum packaging. An approach to maintaining high-vacuum conditions by integrating the MEMS fabrication process with getter material preparation is presented in this paper. In this device, the pressure under measurement causes a deflection of a pressure-sensitive silicon square diaphragm, which is further translated to stress build up in “H” type doubly-clamped micro resonant beams, leading to a resonance frequency shift. The device geometries were optimized using FEM simulation and a 4-inch SOI wafer was used for device fabrication, which required only three photolithographic steps. In the device fabrication, a non-evaporable metal thin film as the getter material was sputtered on a Pyrex 7740 glass wafer, which was then anodically bonded to the patterned SOI wafer for vacuum packaging. Through-glass via holes predefined in the glass wafer functioned as the electrical interconnections between the patterned SOI wafer and the surrounding electrical components. Experimental results recorded that the Q-factor of the resonant beam was beyond 22,000, with a differential sensitivity of 89.86 Hz/kPa, a device resolution of 10 Pa and a nonlinearity of 0.02% F.S with the pressure varying from 50 kPa to 100 kPa. In addition, the temperature drift coefficient was less than −0.01% F.S/°C in the range of −40 °C to 70 °C, the long-term stability error was quantified as 0.01% F.S over a 5-month period and the accuracy of the microsensor was better than 0.01% F.S. PMID:25521385

A high-Q resonant pressure microsensor with through-glass electrical interconnections based on wafer-level MEMS vacuum packaging.

PubMed

Luo, Zhenyu; Chen, Deyong; Wang, Junbo; Li, Yinan; Chen, Jian

2014-12-16

This paper presents a high-Q resonant pressure microsensor with through-glass electrical interconnections based on wafer-level MEMS vacuum packaging. An approach to maintaining high-vacuum conditions by integrating the MEMS fabrication process with getter material preparation is presented in this paper. In this device, the pressure under measurement causes a deflection of a pressure-sensitive silicon square diaphragm, which is further translated to stress build up in "H" type doubly-clamped micro resonant beams, leading to a resonance frequency shift. The device geometries were optimized using FEM simulation and a 4-inch SOI wafer was used for device fabrication, which required only three photolithographic steps. In the device fabrication, a non-evaporable metal thin film as the getter material was sputtered on a Pyrex 7740 glass wafer, which was then anodically bonded to the patterned SOI wafer for vacuum packaging. Through-glass via holes predefined in the glass wafer functioned as the electrical interconnections between the patterned SOI wafer and the surrounding electrical components. Experimental results recorded that the Q-factor of the resonant beam was beyond 22,000, with a differential sensitivity of 89.86 Hz/kPa, a device resolution of 10 Pa and a nonlinearity of 0.02% F.S with the pressure varying from 50 kPa to 100 kPa. In addition, the temperature drift coefficient was less than -0.01% F.S/°C in the range of -40 °C to 70 °C, the long-term stability error was quantified as 0.01% F.S over a 5-month period and the accuracy of the microsensor was better than 0.01% F.S.

Watermarking spot colors in packaging

NASA Astrophysics Data System (ADS)

Reed, Alastair; Filler, TomáÅ.¡; Falkenstern, Kristyn; Bai, Yang

2015-03-01

In January 2014, Digimarc announced Digimarc® Barcode for the packaging industry to improve the check-out efficiency and customer experience for retailers. Digimarc Barcode is a machine readable code that carries the same information as a traditional Universal Product Code (UPC) and is introduced by adding a robust digital watermark to the package design. It is imperceptible to the human eye but can be read by a modern barcode scanner at the Point of Sale (POS) station. Compared to a traditional linear barcode, Digimarc Barcode covers the whole package with minimal impact on the graphic design. This significantly improves the Items per Minute (IPM) metric, which retailers use to track the checkout efficiency since it closely relates to their profitability. Increasing IPM by a few percent could lead to potential savings of millions of dollars for retailers, giving them a strong incentive to add the Digimarc Barcode to their packages. Testing performed by Digimarc showed increases in IPM of at least 33% using the Digimarc Barcode, compared to using a traditional barcode. A method of watermarking print ready image data used in the commercial packaging industry is described. A significant proportion of packages are printed using spot colors, therefore spot colors needs to be supported by an embedder for Digimarc Barcode. Digimarc Barcode supports the PANTONE spot color system, which is commonly used in the packaging industry. The Digimarc Barcode embedder allows a user to insert the UPC code in an image while minimizing perceptibility to the Human Visual System (HVS). The Digimarc Barcode is inserted in the printing ink domain, using an Adobe Photoshop plug-in as the last step before printing. Since Photoshop is an industry standard widely used by pre-press shops in the packaging industry, a Digimarc Barcode can be easily inserted and proofed.

Stability of Beriplast P fibrin sealant: storage and reconstitution.

PubMed

Eberhard, Ulrich; Broder, Martin; Witzke, Günther

2006-04-26

This study was performed to investigate the stability of Beriplast P fibrin sealant (FS) across a range of storage conditions, both pre- and post-reconstitution. Storage stability of the FS was evaluated during long-term refrigeration (24 months) with or without interim storage at elevated temperatures (40 degrees C for 1 week and 25 degrees C for 1 and 3 months). Stability of individual FS components was assessed by measuring: fibrinogen content, Factor XIII activity (FXIII), thrombin activity and aprotinin potency. The package integrity of each component was also checked (sterility testing, moisture content and pH). Storage stability was also evaluated by testing the reconstituted product for adhesion (tearing force testing after mixing the solutions) and sterility. Reconstitution stability was evaluated following 3-months' storage, for up to 50 h post-reconstitution using the same tests as for the storage stability investigations. Pre-defined specifications were met for fibrinogen content, Factor XIII activity, and thrombin activity, demonstrating storage stability. Package integrity and the functionality and sterility of the reconstituted product were confirmed throughout. Reconstitution stability was demonstrated for up to 50 h following reconstitution, in terms of both tearing force and sterility tests. In conclusion, the storage stability of Beriplast P was demonstrated over a range of 24-month storage schedules including interim exposure to elevated temperature, and the reconstituted product was stable for up to 50 h.

48 CFR 1852.211-70 - Packaging, handling, and transportation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... transportation. 1852.211-70 Section 1852.211-70 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND... and Clauses 1852.211-70 Packaging, handling, and transportation. As prescribed in 1811.404-70, insert the following clause: Packaging, Handling, and Transportation (SEPT 2005) (a) The Contractor shall...

48 CFR 1852.211-70 - Packaging, handling, and transportation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... transportation. 1852.211-70 Section 1852.211-70 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND... and Clauses 1852.211-70 Packaging, handling, and transportation. As prescribed in 1811.404-70, insert the following clause: Packaging, Handling, and Transportation (SEP 2005) (a) The Contractor shall...

48 CFR 1852.211-70 - Packaging, handling, and transportation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... transportation. 1852.211-70 Section 1852.211-70 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND... and Clauses 1852.211-70 Packaging, handling, and transportation. As prescribed in 1811.404-70, insert the following clause: Packaging, Handling, and Transportation (SEP 2005) (a) The Contractor shall...

48 CFR 1852.211-70 - Packaging, handling, and transportation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... transportation. 1852.211-70 Section 1852.211-70 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND... and Clauses 1852.211-70 Packaging, handling, and transportation. As prescribed in 1811.404-70, insert the following clause: Packaging, Handling, and Transportation (SEP 2005) (a) The Contractor shall...

21 CFR 516.165 - Records and reports.

Code of Federal Regulations, 2014 CFR

2014-04-01

... within 60 days thereafter. The report must contain data and information for the full reporting period..., include a summary of those changes and the holder's and distributor's current package labeling, including any package inserts. For large-size package labeling or large shipping cartons, submit a...

21 CFR 516.165 - Records and reports.

Code of Federal Regulations, 2012 CFR

2012-04-01

... within 60 days thereafter. The report must contain data and information for the full reporting period..., include a summary of those changes and the holder's and distributor's current package labeling, including any package inserts. For large-size package labeling or large shipping cartons, submit a...

SOFIA: an R package for enhancing genetic visualization with Circos

USDA-ARS?s Scientific Manuscript database

Visualization of data from any stage of genetic and genomic research is one of the most useful approaches for detecting potential errors, ensuring accuracy and reproducibility, and presentation of the resulting data. Currently software such as Circos, ClicO FS, and RCircos, among others, provide too...

The NASA Electronic Parts and Packaging (NEPP) Program: Insertion of New Electronics Technologies

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2007-01-01

This viewgraph presentation gives an overview of NASA Electronic Parts and Packaging (NEPP) Program's new electronics technology trends. The topics include: 1) The Changing World of Radiation Testing of Memories; 2) Even Application-Specific Tests are Costly!; 3) Hypothetical New Technology Part Qualification Cost; 4) Where we are; 5) Approaching FPGAs as a More Than a "Part" for Reliability; 6) FPGAs Beget Novel Radiation Test Setups; 7) Understanding the Complex Radiation Data; 8) Tracking Packaging Complexity and Reliability for FPGAs; 9) Devices Supporting the FPGA Need to be Considered; 10) Summary of the New Electronic Technologies and Insertion into Flight Programs Workshop; and 11) Highlights of Panel Notes and Comments

ProtSqueeze: simple and effective automated tool for setting up membrane protein simulations.

PubMed

Yesylevskyy, Semen O

2007-01-01

The major challenge in setting up membrane protein simulations is embedding the protein into the pre-equilibrated lipid bilayer. Several techniques were proposed to achieve optimal packing of the lipid molecules around the protein. However, all of them possess serious disadvantages, which limit their applicability and discourage the users of simulation packages from using them. In the present work, we analyzed existing approaches and proposed a new procedure of protein insertion into the lipid bilayer, which is implemented in the ProtSqueeze software. The advantages of ProtSqueeze are as follows: (1) the insertion algorithm is simple, understandable, and controllable; (2) the software can work with virtually any simulation package on virtually any platform; (3) no modification of the source code of the simulation package is needed; (4) the procedure of insertion is as automated as possible; (5) ProtSqueeze is distributed for free under a general public license. In this work, we present the architecture and the algorithm of ProtSqueeze and demonstrate its usage in case studies.

48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Non-manufactured wood... and Clauses 552.211-89 Non-manufactured wood packaging material for export. As prescribed in 511.204(b)(4), insert the following clause: Non-Manufactured Wood Packaging Material for Export (JAN 2010) (a...

48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Non-manufactured wood... and Clauses 552.211-89 Non-manufactured wood packaging material for export. As prescribed in 511.204(b)(4), insert the following clause: Non-Manufactured Wood Packaging Material for Export (JAN 2010) (a...

48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Non-manufactured wood... and Clauses 552.211-89 Non-manufactured wood packaging material for export. As prescribed in 511.204(b)(4), insert the following clause: Non-Manufactured Wood Packaging Material for Export (JAN 2010) (a...

48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Non-manufactured wood... and Clauses 552.211-89 Non-manufactured wood packaging material for export. As prescribed in 511.204(b)(4), insert the following clause: Non-Manufactured Wood Packaging Material for Export (JAN 2010) (a...

48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Non-manufactured wood... and Clauses 552.211-89 Non-manufactured wood packaging material for export. As prescribed in 511.204(b)(4), insert the following clause: Non-Manufactured Wood Packaging Material for Export (JAN 2010) (a...

[Incremental effect and mechanism of cyclosporine on blood concentration of statins and statin package insert information in Japan].

PubMed

Hirata-Koizumi, Mutsuko; Saito, Mitsuo; Miyake, Shinji; Hasegawa, Ryuichi

2005-01-01

Cyclosporine is an indispensable immunosuppressant used in organ transplant patients, who frequently manifest hyperlipidemia. Statins, which are cholesterol-lowering agents, are often combined with cyclosporine in the treatment of hyperlipidemia of organ transplant patients. Since cyclosporine is a substrate and inhibitor of CYP3A4, researchers suspect that the immunosuppressant inhibits CYP3A4-mediated metabolism of statins, leading to an increase in statin plasma concentration and infrequently resulting in rhabdomyolysis. However, a number of clinical trials have shown cyclosporine to increase the plasma concentration of all developed statins, including those not metabolized by CYP3A4. Furthemore, recent mechanistic studies have shown organic anion transporting peptides (OATP) C to mediate the uptake of some statins and cyclosporine has been shown to inhibit the uptake via OATP-C in cultured cells. Therefore, the inhibition of hepatic uptake of statins is considered to be one of the mechanisms by which cyclosporine incrementally increases statin blood concentration. However, most current Japanese package inserts of statins give no information on change in pharmacokinetic parameters such as AUC and Cmax in the combined medication with cyclosporine. Furthermore, in the Japanese package inserts, it is either stated that cyclosporine inhibits CYP3A4-mediated metabolism or no comment is made on the mechanism. The package insert should properly provide available quantitative information on the change of pharmacokinetic parameters and the probable mechanism of action.

Compact fs ytterbium fiber laser at 1010 nm for biomedical applications.

PubMed

Kong, Cihang; Pilger, Christian; Hachmeister, Henning; Wei, Xiaoming; Cheung, Tom H; Lai, Cora S W; Huser, Thomas; Tsia, Kevin K; Wong, Kenneth K Y

2017-11-01

Ytterbium-doped fiber lasers (YDFLs) working in the near-infrared (NIR) spectral window and capable of high-power operation are popular in recent years. They have been broadly used in a variety of scientific and industrial research areas, including light bullet generation, optical frequency comb formation, materials fabrication, free-space laser communication, and biomedical diagnostics as well. The growing interest in YDFLs has also been cultivated for the generation of high-power femtosecond (fs) pulses. Unfortunately, the operating wavelengths of fs YDFLs have mostly been confined to two spectral bands, i.e., 970-980 nm through the three-level energy transition and 1030-1100 nm through the quasi three-level energy transition, leading to a spectral gap (990-1020 nm) in between, which is attributed to an intrinsically weak gain in this wavelength range. Here we demonstrate a high-power mode-locked fs YDFL operating at 1010 nm, which is accomplished in a compact and cost-effective package. It exhibits superior performance in terms of both short-term and long-term stability, i.e., <0.3% (peak intensity over 2.4 μs) and <4.0% (average power over 24 hours), respectively. To illustrate the practical applications, it is subsequently employed as a versatile fs laser for high-quality nonlinear imaging of biological samples, including two-photon excited fluorescence microscopy of mouse kidney and brain sections, as well as polarization-sensitive second-harmonic generation microscopy of potato starch granules and mouse tail muscle. It is anticipated that these efforts will largely extend the capability of fs YDFLs which is continuously tunable over 970-1100 nm wavelength range for wideband hyperspectral operations, serving as a promising complement to the gold-standard Ti:sapphire fs lasers.

Compact fs ytterbium fiber laser at 1010 nm for biomedical applications

PubMed Central

Kong, Cihang; Pilger, Christian; Hachmeister, Henning; Wei, Xiaoming; Cheung, Tom H.; Lai, Cora S. W.; Huser, Thomas; Tsia, Kevin. K.; Wong, Kenneth K. Y.

2017-01-01

Ytterbium-doped fiber lasers (YDFLs) working in the near-infrared (NIR) spectral window and capable of high-power operation are popular in recent years. They have been broadly used in a variety of scientific and industrial research areas, including light bullet generation, optical frequency comb formation, materials fabrication, free-space laser communication, and biomedical diagnostics as well. The growing interest in YDFLs has also been cultivated for the generation of high-power femtosecond (fs) pulses. Unfortunately, the operating wavelengths of fs YDFLs have mostly been confined to two spectral bands, i.e., 970-980 nm through the three-level energy transition and 1030-1100 nm through the quasi three-level energy transition, leading to a spectral gap (990-1020 nm) in between, which is attributed to an intrinsically weak gain in this wavelength range. Here we demonstrate a high-power mode-locked fs YDFL operating at 1010 nm, which is accomplished in a compact and cost-effective package. It exhibits superior performance in terms of both short-term and long-term stability, i.e., <0.3% (peak intensity over 2.4 μs) and <4.0% (average power over 24 hours), respectively. To illustrate the practical applications, it is subsequently employed as a versatile fs laser for high-quality nonlinear imaging of biological samples, including two-photon excited fluorescence microscopy of mouse kidney and brain sections, as well as polarization-sensitive second-harmonic generation microscopy of potato starch granules and mouse tail muscle. It is anticipated that these efforts will largely extend the capability of fs YDFLs which is continuously tunable over 970-1100 nm wavelength range for wideband hyperspectral operations, serving as a promising complement to the gold-standard Ti:sapphire fs lasers. PMID:29188091

Low-profile fiber connector for co-packaged optics

NASA Astrophysics Data System (ADS)

Brusberg, Lars; DeJong, Michael; Butler, Douglas L.; Clark, Jeffrey S.; Sutton, Clifford G.

2018-02-01

We developed a small form factor connector that can be assembled on all four sides of a high-data switch package for fiber connectivity. This paper discusses a novel connector approach that has the potential to meet all co-packaging requirements including solder-reflow-compatibility, de-mateability, low insertion loss and state-of-the art FAU attach. The connector was attached to the PIC for performance evaluation. The average insertion loss across all eight fibers of the assembly was 1.77 dB, including the three optical interfaces: (1) MT-to-MT between connector and receptacle, (2) receptacle-to-PLC and (3) PIC-to-FAU. Also included is the propagation loss of the PIC waveguide. Optical return loss was measured to be -55 dB or lower.

Cigarette package inserts can promote efficacy beliefs and sustained smoking cessation attempts: A longitudinal assessment of an innovative policy in Canada

PubMed Central

Thrasher, James F.; Swayampakala, Kamala; Cummings, K. Michael; Hammond, David; Anshari, Dien; Krugman, Dean M.; Hardin, James W.

2016-01-01

Background In June 2012, Canada implemented new pictorial warnings on cigarette packages, along with package inserts with messages to promote response efficacy (i.e., perceived quitting benefits) and self-efficacy (i.e., confidence to quit). This study assessed smokers’ attention towards warnings and inserts and its relationship with efficacy beliefs, risk perceptions and cessation at follow-up. Methods Data were analysed in 2015 from a prospective online consumer panel of adult Canadian smokers surveyed every four months between September 2012 and September 2014. Generalized Estimating Equation models assessed associations between reading inserts, reading warnings and efficacy beliefs (self-efficacy, response efficacy), risk perceptions, quit attempts of any length, and sustained quit attempts (i.e., 30 days or more) at follow-up. Models adjusted for socio-demographics, smoking-related variables, and time-in-sample effects. Results Over the study period, reading warnings significantly decreased (p<0.0001) while reading inserts increased (p=0.004). More frequent reading of warnings was associated independently with stronger response efficacy (Boften/very often vs never=0.28, 95% CI: 0.11–0.46) and risk perceptions at follow-up (Boften/very often vs never=0.31, 95% CI: 0.06–0.56). More frequent reading of inserts was associated independently with stronger self-efficacy to quit at follow-up (Btwice or more vs none=0.30, 95% CI: 0.14–0.47), quit attempts (ORtwice or more vs none= 1.68, 95% CI: 1.28–2.19), and quit attempts lasting 30 days or longer (ORtwice or more vs none=1.48, 95% CI: 1.01 – 2.17). Conclusions More frequent reading of inserts was associated with self-efficacy to quit, quit attempts, and sustained quitting at follow-up, suggesting that inserts complement pictorial HWLs. PMID:26970037

40 CFR 60.431 - Definitions and notations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...

40 CFR 60.431 - Definitions and notations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...

40 CFR 60.431 - Definitions and notations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...

40 CFR 60.431 - Definitions and notations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...

40 CFR 60.431 - Definitions and notations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...

Conformity of package inserts information to regulatory requirements among selected branded and generic medicinal products circulating on the East African market.

PubMed

Sillo, Hiiti B; Masota, Nelson E; Kisoma, Sunday; Rago, Lembit; Mgoyela, Veronica; Kaale, Eliangiringa A

2018-01-01

Availability of correct and adequate information about medicines is an important aspect in ensuring rational use of medicines and hence facilitating safety and expected efficacy of medicines during therapy. Package inserts have proven to be a good source of information to the prescribers and patients whereby they have been useful in highlighting important information pertaining proper use and handling of the medicines. The present study was aimed at establishing the extent to which package inserts of medicines circulating on the markets of the East African Community (EAC) Partner States conform to medicines information requirements as established in the harmonized guidelines as well as national guidelines. A total of 99 package inserts from six (6) types of medicines namely Albendazole, Artemether/Lumefantrine (ALu), Ciprofloxacin, Paracetamol, Amoxicillin and Metronidazole were purposefully collected from three EAC Partner States: Kenya, Tanzania and Uganda. The medicines were selected based on their indications as first line treatments, high rates of utilization within the medicines supply system and their positions in treatment of diseases of public importance across EAC Partner States. The inserts were evaluated on the availability of information regarding fifteen (15) parameters as extracted from the EAC harmonized guidelines for registration of medicines. Moreover, comparisons were made between the percentage conformity of the branded versus generic products, markets from which the samples were collected, origin of the manufacturer and type of medicine. Majority (93.9-100%) of the medicines' package inserts highly conformed to the inclusion of the information regarding the description and composition of the medications, indications, dosage and methods of administration, warnings and precautions, contraindications and storage conditions. However, the information on handling and disposal, container package description, excipients used, clinical pharmacology of the medicines, and directions regarding overdose ranked the least in conformance with conformity ranging from 13.1-52.5%. The parameter with the lowest observed percentage conformity among the branded products scored 50% as compared to 10.8% among the generic products. Moreover, there was no significant difference (P<0.05) in the percentage conformity of the package inserts collected from each of the three Partner States as compared to the average from studied medicines. A generally good conformity was observed among medicines manufactured by European based manufacturers as compared to those based in Asia and EAC Partner States. In addition, PIs of Albendazole, Ciprofloxacin, Amoxicillin and Artemether/Lumefantrine did show overall high conformity across most of the product information requirements. Our study revealed the existence of a significant number of medicinal products circulating on the markets of EAC Partner States without necessary compliance with all product information requirements. We therefore recommend that NMRAs ensure thorough pre-market assessment of product information as well as strengthening their post marketing surveillance to ensure that medicines circulating on the market comply to medicines information requirements at all times. Emphasis should also be given to manufacturers on the importance of inclusion of appropriate and adequate product information for the safety of patients, including advocating for inclusion of patient-friendly and easy to understand medicines information.

Malaria rapid diagnostic kits: quality of packaging, design and labelling of boxes and components and readability and accuracy of information inserts.

PubMed

Gillet, Philippe; Maltha, Jessica; Hermans, Veerle; Ravinetto, Raffaella; Bruggeman, Cathrien; Jacobs, Jan

2011-02-13

The present study assessed malaria RDT kits for adequate and correct packaging, design and labelling of boxes and components. Information inserts were studied for readability and accuracy of information. Criteria for packaging, design, labelling and information were compiled from Directive 98/79 of the European Community (EC), relevant World Health Organization (WHO) documents and studies on end-users' performance of RDTs. Typography and readability level (Flesch-Kincaid grade level) were assessed. Forty-two RDT kits from 22 manufacturers were assessed, 35 of which had evidence of good manufacturing practice according to available information (i.e. CE-label affixed or inclusion in the WHO list of ISO13485:2003 certified manufacturers). Shortcomings in devices were (i) insufficient place for writing sample identification (n=40) and (ii) ambiguous labelling of the reading window (n=6). Buffer vial labels were lacking essential information (n=24) or were of poor quality (n=16). Information inserts had elevated readability levels (median Flesch Kincaid grade 8.9, range 7.1-12.9) and user-unfriendly typography (median font size 8, range 5-10). Inadequacies included (i) no referral to biosafety (n=18), (ii) critical differences between depicted and real devices (n=8), (iii) figures with unrealistic colours (n=4), (iv) incomplete information about RDT line interpretations (n=31) and no data on test characteristics (n=8). Other problems included (i) kit names that referred to Plasmodium vivax although targeting a pan-species Plasmodium antigen (n=4), (ii) not stating the identity of the pan-species antigen (n=2) and (iii) slight but numerous differences in names displayed on boxes, device packages and information inserts. Three CE labelled RDT kits produced outside the EC had no authorized representative affixed and the shape and relative dimensions of the CE symbol affixed did not comply with the Directive 98/79/EC. Overall, RDTs with evidence of GMP scored better compared to those without but inadequacies were observed in both groups. Overall, malaria RDTs showed shortcomings in quality of construction, design and labelling of boxes, device packages, devices and buffers. Information inserts were difficult to read and lacked relevant information.

48 CFR 52.247-65 - F.o.b. Origin, Prepaid Freight-Small Package Shipments.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false F.o.b. Origin, Prepaid... Text of Provisions and Clauses 52.247-65 F.o.b. Origin, Prepaid Freight—Small Package Shipments. As prescribed in 47.303-17(f), insert the following clause: F.o.b. Origin Prepaid Freight—Small Package...

Biomechanical Changes in Disc Pressure and Facet Strain after Lumbar Spinal Arthroplasty with CharitéTM in the Human Cadaveric Spine under Physiologic Compressive Follower Preload.

PubMed

Choi, Jong-Il; Kim, Se-Hoon; Lim, Dong-Jun; Ha, Sung-Kon; Kim, Sang-Dae

2017-01-01

Arthroplasty maintains the biomechanical features of a healthy disc, decreases the adjacent segment disease rate, and decreases the accelerated degeneration rate of the neighboring discs in traditional fusion procedures. However, there are only a few reports on adjacent disc pressure (DP) and facet strain (FS) after lumbar arthroplasty under a physiologic compressive preload. Baseline DP and FS measurements were obtained from five intact cadaveric human lumbosacral spines for different modes of motion. DP was measured by inserting pressure transducer needle tips into the L3-L4 and L5-S1 discs. FS gauges were fixed on both sides of the laminae near the L3-L4, L4-L5, and L5-S1 facet joints. After SB Charité < sup > TM < /sup > III implantation at the L4-L5 level, the measurements were repeated at preload and compared with those of the intact spine. Under the preload condition, the central DP of the upper disc was decreased during extension and bending, and it significantly increased during rotation (p < 0.05). In the lower disc, the central DP insignificantly decreased during bending and increased during extension and flexion. A statistically significant increase in FS was observed during rotation at the operative facet (p < 0.05). Compared to the intact spine, all FS values were insignificantly decreased during lateral bending but increased during axial rotation. In an ex-vivo physiologic preload setting, the SB Charité < sup > TM < /sup > III provided relatively inconsistent and sometimes increased DP or FS at the operative and adjacent levels after arthroplasty.

Packaging double-helical DNA into viral capsids.

PubMed

LaMarque, Jaclyn C; Le, Thuc-Vy L; Harvey, Stephen C

2004-02-15

DNA packaging in bacteriophage P4 has been examined using a molecular mechanics model with a reduced representation containing one pseudoatom per turn of the double helix. The model is a discretized version of an elastic continuum model. The DNA is inserted piecewise into the model capsid, with the structure being reoptimized after each piece is inserted. Various optimization protocols were investigated, and it was found that molecular dynamics at a very low temperature (0.3 K) produces the optimal packaged structure. This structure is a concentric spool, rather than the coaxial spool that has been commonly accepted for so many years. This geometry, which was originally suggested by Hall and Schellman in 1982 (Biopolymers Vol. 21, pp. 2011-2031), produces a lower overall elastic energy than coaxial spooling. Copyright 2003 Wiley Periodicals, Inc.

Investigating the Correlation Between Pharmacy Student Performance on the Health Science Reasoning Test and a Critical Thinking Assignment.

PubMed

Nornoo, Adwoa O; Jackson, Jonathan; Axtell, Samantha

2017-03-25

Objective. To determine whether there is a correlation between pharmacy students' scores on the Health Science Reasoning Test (HSRT) and their grade on a package insert assignment designed to assess critical thinking. Methods. The HSRT was administered to first-year pharmacy students during a critical-thinking course in the spring semester. In the same semester, a required package insert assignment was completed in a pharmacokinetics course. To determine whether there was a relationship between HSRT scores and grades on the assignment, a Spearman's rho correlation test was performed. Results. A very weak but significant positive correlation was found between students' grades on the assignment and their overall HSRT score (r=0.19, p <0.05), as well as deduction (a scale score of the HSRT; r=0.26, p <0.01). Conclusion. Based on a very weak but significant correlation to HSRT scores, this study demonstrated the potential of a package insert assignment to be used as one of the components to measure critical-thinking skills in pharmacy students.

Investigating the Correlation Between Pharmacy Student Performance on the Health Science Reasoning Test and a Critical Thinking Assignment

PubMed Central

Jackson, Jonathan; Axtell, Samantha

2017-01-01

Objective. To determine whether there is a correlation between pharmacy students’ scores on the Health Science Reasoning Test (HSRT) and their grade on a package insert assignment designed to assess critical thinking. Methods. The HSRT was administered to first-year pharmacy students during a critical-thinking course in the spring semester. In the same semester, a required package insert assignment was completed in a pharmacokinetics course. To determine whether there was a relationship between HSRT scores and grades on the assignment, a Spearman’s rho correlation test was performed. Results. A very weak but significant positive correlation was found between students’ grades on the assignment and their overall HSRT score (r=0.19, p<0.05), as well as deduction (a scale score of the HSRT; r=0.26, p<0.01). Conclusion. Based on a very weak but significant correlation to HSRT scores, this study demonstrated the potential of a package insert assignment to be used as one of the components to measure critical-thinking skills in pharmacy students. PMID:28381884

Pilot Fullerton uses water dispenser kit gun to rehydrate food package

NASA Image and Video Library

1982-03-30

STS003-26-254 (30 March 1982) --- Astronaut Gordon Fullerton, STS-3 pilot, wearing communications kit assembly (ASSY) mini-headset (HDST), inserts the JSC water dispenser kit water gun in rehydratable plastic food (cereal) package to fill it with hot water. Photo credit: NASA

Health Instruction Packages: Specific Nursing Skills.

ERIC Educational Resources Information Center

Bates, Clarice; And Others

Text, illustrations, and exercises are utilized in a set of five learning modules designed to instruct nursing students in a variety of clinical skills. The first module, "Down the Tube: Insertion of a Nasogastric Tube" by Clarice Bates, describes materials and procedures used to insert a nasogastric tube through the nose and esophagus…

Dual Use of Packaging on the Moon: Logistics-2-Living

NASA Technical Reports Server (NTRS)

Howe, A. Scott; Howard, Robert

2010-01-01

This paper describes a modular packaging system for logistics that can be reconfigured into internal outfitting for a lunar outpost, including desks, chairs, partitions, cabinets, and radiation shielding. Logistics include clothes, equipment, food, and other consumables needed to sustain the crew for the duration of the mission. A significant mass penalty is required for the packaging and handling of logistics for re-supply of short to long-term space missions that must be brought out of the gravity well on a launch vehicle. Once the supplies have been exhausted, the packaging material is typically of no further use and is discarded. If a scheme can be developed that reuses the logistics packaging, the mass penalty can be reduced. In this research, a modular packaging system has been devised as a kit-of-parts that can be used for both handling logistics supplies, and then reconfigured into desks, chairs, partitions, cabinets, and radiation shielding. The system is derived from a standard International Space Station (ISS)-type Cargo Transfer Bag (CTB), using soft, unfoldable box-like containers with stiff metal inserts. The empty hydrogen-impregnated CTBs can be used as-is for cabinets, opened up for use as partitions, or draped over the habitat as layers of radiation shielding. Stiff metal inserts can be reconfigured into desks and other useful outfitting.

Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

NASA Astrophysics Data System (ADS)

Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

1993-08-01

A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

Current oral contraceptive use instructions: an analysis of patient package inserts.

PubMed

Williams-Deane, M; Potter, L S

1992-01-01

Oral contraceptive use instructions contained in manufacturers' patient package inserts (PPIs) are often inconsistent or conflicting, both among manufacturers and among different brands and regimens from the same manufacturer. Instructions on what to do about missed pills are often incomplete or inadequate, as are instructions on backup contraceptive use when pills are missed. The format of many PPIs is confusing and makes instructions difficult to find and read. Comprehending the PPIs requires the user to read at a 10th-12th-grade level, far higher than the generally accepted 5th-6th grade level considered standard for health education materials.

Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

NASA Technical Reports Server (NTRS)

Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

1993-01-01

A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

Malaria rapid diagnostic kits: quality of packaging, design and labelling of boxes and components and readability and accuracy of information inserts

PubMed Central

2011-01-01

Background The present study assessed malaria RDT kits for adequate and correct packaging, design and labelling of boxes and components. Information inserts were studied for readability and accuracy of information. Methods Criteria for packaging, design, labelling and information were compiled from Directive 98/79 of the European Community (EC), relevant World Health Organization (WHO) documents and studies on end-users' performance of RDTs. Typography and readability level (Flesch-Kincaid grade level) were assessed. Results Forty-two RDT kits from 22 manufacturers were assessed, 35 of which had evidence of good manufacturing practice according to available information (i.e. CE-label affixed or inclusion in the WHO list of ISO13485:2003 certified manufacturers). Shortcomings in devices were (i) insufficient place for writing sample identification (n = 40) and (ii) ambiguous labelling of the reading window (n = 6). Buffer vial labels were lacking essential information (n = 24) or were of poor quality (n = 16). Information inserts had elevated readability levels (median Flesch Kincaid grade 8.9, range 7.1 - 12.9) and user-unfriendly typography (median font size 8, range 5 - 10). Inadequacies included (i) no referral to biosafety (n = 18), (ii) critical differences between depicted and real devices (n = 8), (iii) figures with unrealistic colours (n = 4), (iv) incomplete information about RDT line interpretations (n = 31) and no data on test characteristics (n = 8). Other problems included (i) kit names that referred to Plasmodium vivax although targeting a pan-species Plasmodium antigen (n = 4), (ii) not stating the identity of the pan-species antigen (n = 2) and (iii) slight but numerous differences in names displayed on boxes, device packages and information inserts. Three CE labelled RDT kits produced outside the EC had no authorized representative affixed and the shape and relative dimensions of the CE symbol affixed did not comply with the Directive 98/79/EC. Overall, RDTs with evidence of GMP scored better compared to those without but inadequacies were observed in both groups. Conclusion Overall, malaria RDTs showed shortcomings in quality of construction, design and labelling of boxes, device packages, devices and buffers. Information inserts were difficult to read and lacked relevant information. PMID:21314992

A comprehensive study of small non-frameshift insertions/deletions in proteins and prediction of their phenotypic effects by a machine learning method (KD4i)

PubMed Central

2014-01-01

Background Small insertion and deletion polymorphisms (Indels) are the second most common mutations in the human genome, after Single Nucleotide Polymorphisms (SNPs). Recent studies have shown that they have significant influence on genetic variation by altering human traits and can cause multiple human diseases. In particular, many Indels that occur in protein coding regions are known to impact the structure or function of the protein. A major challenge is to predict the effects of these Indels and to distinguish between deleterious and neutral variants. When an Indel occurs within a coding region, it can be either frameshifting (FS) or non-frameshifting (NFS). FS-Indels either modify the complete C-terminal region of the protein or result in premature termination of translation. NFS-Indels insert/delete multiples of three nucleotides leading to the insertion/deletion of one or more amino acids. Results In order to study the relationships between NFS-Indels and Mendelian diseases, we characterized NFS-Indels according to numerous structural, functional and evolutionary parameters. We then used these parameters to identify specific characteristics of disease-causing and neutral NFS-Indels. Finally, we developed a new machine learning approach, KD4i, that can be used to predict the phenotypic effects of NFS-Indels. Conclusions We demonstrate in a large-scale evaluation that the accuracy of KD4i is comparable to existing state-of-the-art methods. However, a major advantage of our approach is that we also provide the reasons for the predictions, in the form of a set of rules. The rules are interpretable by non-expert humans and they thus represent new knowledge about the relationships between the genotype and phenotypes of NFS-Indels and the causative molecular perturbations that result in the disease. PMID:24742296

The development and validation of command schedules for SeaWiFS

NASA Astrophysics Data System (ADS)

Woodward, Robert H.; Gregg, Watson W.; Patt, Frederick S.

1994-11-01

An automated method for developing and assessing spacecraft and instrument command schedules is presented for the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) project. SeaWiFS is to be carried on the polar-orbiting SeaStar satellite in 1995. The primary goal of the SeaWiFS mission is to provide global ocean chlorophyll concentrations every four days by employing onboard recorders and a twice-a-day data downlink schedule. Global Area Coverage (GAC) data with about 4.5 km resolution will be used to produce the global coverage. Higher resolution (1.1 km resolution) Local Area Coverage (LAC) data will also be recorded to calibrate the sensor. In addition, LAC will be continuously transmitted from the satellite and received by High Resolution Picture Transmission (HRPT) stations. The methods used to generate commands for SeaWiFS employ numerous hierarchical checks as a means of maximizing coverage of the Earth's surface and fulfilling the LAC data requirements. The software code is modularized and written in Fortran with constructs to mirror the pre-defined mission rules. The overall method is specifically developed for low orbit Earth-observing satellites with finite onboard recording capabilities and regularly scheduled data downlinks. Two software packages using the Interactive Data Language (IDL) for graphically displaying and verifying the resultant command decisions are presented. Displays can be generated which show portions of the Earth viewed by the sensor and spacecraft sub-orbital locations during onboard calibration activities. An IDL-based interactive method of selecting and testing LAC targets and calibration activities for command generation is also discussed.

Packaging of microwave integrated circuits operating beyond 100 GHz

NASA Technical Reports Server (NTRS)

Samoska, L.; Daniel, E.; Sokolov, V.; Sommerfeldt, S.; Bublitz, J.; Olson, K.; Gilbert, B.; Chow, D.

2002-01-01

Several methods of packaging high speed (75-330 GHz) InP HEMT MMIC devices are discussed. Coplanar wirebonding is presented with measured insertion loss of less than 0.5dB and return loss better than -17 dB from DC to 110 GHz. A motherboard/daughterboard packaging scheme is presented which supports minimum loss chains of MMICs using this coplanar wirebonding method. Split waveguide block packaging approaches are presented in G-band (140-220 GHz) with two types of MMIC-waveguide transitions: E-plane probe andantipodal finline.

Life Cycle Inventory (LCI) Data-Treatment Chemicals ...

EPA Pesticide Factsheets

This report estimates environmental emission factors (EmF) for key chemicals, construction and treatment materials, transportation/on-site equipment, and other processes used at remediation sites. The basis for chemical, construction, and treatment material EmFs is life cycle inventory (LCI) data extracted from secondary data sources and compiled using the openLCA software package. The US EPA MOVES 2014 model was used to derive EmFs from combustion profiles for a number of transportation and on-site equipment processes. The EmFs were calculated for use in US EPA’s Spreadsheets for Environmental Footprint Analysis (SEFA). EmFs are reported for cumulative energy demand (CED), global warming potential (GWP), criteria pollutants (e.g. NOX, SOX, and PM10), hazardous air pollutants (HAPs), and water use. Since the USEPA launched its green remediation program, metrics such as impacts, outcomes, and environmental burdens of remediation actions have been difficult to assess. This research includes metrics to quantify RCRA and CERCLA remediation actions. Metrics include: greenhouse gases, energy demand, water use, SOX, NOX, PM10, and hazardous air pollutants. The primary user of this project is EPA's Region 9 Superfund and Technology Office for input into the SEFA tool. SEFA is a set of analytical workbooks used to quantify the environmental footprint of a site cleanup in order to achieve a greener cleanup. SEFA permits users to enter actual or anticipated data on site

Method of fabricating a microelectronic device package with an integral window

DOEpatents

Peterson, Kenneth A.; Watson, Robert D.

2003-01-01

A method of fabricating a microelectronic device package with an integral window for providing optical access through an aperture in the package. The package is made of a multilayered insulating material, e.g., a low-temperature cofired ceramic (LTCC) or high-temperature cofired ceramic (HTCC). The window is inserted in-between personalized layers of ceramic green tape during stackup and registration. Then, during baking and firing, the integral window is simultaneously bonded to the sintered ceramic layers of the densified package. Next, the microelectronic device is flip-chip bonded to cofired thick-film metallized traces on the package, where the light-sensitive side is optically accessible through the window. Finally, a cover lid is attached to the opposite side of the package. The result is a compact, low-profile package, flip-chip bonded, hermetically-sealed package having an integral window.

Correlations between homologue concentrations of PCDD/Fs and toxic equivalency values in laboratory-, package boiler-, and field-scale incinerators.

PubMed

Iino, Fukuya; Takasuga, Takumi; Touati, Abderrahmane; Gullett, Brian K

2003-01-01

The toxic equivalency (TEQ) values of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) are predicted with a model based on the homologue concentrations measured from a laboratory-scale reactor (124 data points), a package boiler (61 data points), and operating municipal waste incinerators (114 data points). Regardless of the three scales and types of equipment, the different temperature profiles, sampling emissions and/or solids (fly ash), and the various chemical and physical properties of the fuels, all the PCDF plots showed highly linear correlations (R(2)>0.99). The fitting lines of the reactor and the boiler data were almost linear with slope of unity, whereas the slope of the municipal waste incinerator data was 0.86, which is caused by higher predicted values for samples with high measured TEQ. The strong correlation also implies that each of the 10 toxic PCDF congeners has a constant concentration relative to its respective total homologue concentration despite a wide range of facility types and combustion conditions. The PCDD plots showed significant scatter and poor linearity, which implies that the relative concentration of PCDD TEQ congeners is more sensitive to variations in reaction conditions than that of the PCDF congeners.

Testing Cessation Messages for Cigarette Package Inserts: Findings from a Best/Worst Discrete Choice Experiment

PubMed Central

Thrasher, James F.; Davis, Rachel E.; Popova, Lucy; Cho, Yoo Jin; Salloum, Ramzi G.; Louviere, Jordan; Hammond, David

2018-01-01

This study assessed smokers’ responses to different smoking cessation topics and imagery for cigarette package inserts. Adult smokers from Canada (n = 1000) participated in three discrete choice experiments (DCEs): DCE 1 assessed five cessation benefit topics and five imagery types; DCE 2 assessed five messages with tips to improve cessation success and five imagery types; DCE 3 assessed four reproductive health benefits of cessation topics and four imagery types. In each DCE, participants evaluated four or five sets of four inserts, selecting the most and least motivating (DCEs 1 & 3) or helpful (DCE 2) for quitting. Linear mixed models regressed choices on insert and smoker characteristics. For DCE 1, the most motivating messages involved novel disease topics and imagery of younger women. For DCE 2, topics of social support, stress reduction and nicotine replacement therapy were selected as most helpful, with no differences by imagery type. For DCE 3, imagery influenced choices more than topic, with imagery of a family or a mom and baby selected as most motivating. Statistically significant interactions for all three experiments indicated that the influence of imagery type on choices depended on the message topic. Messages to promote smoking cessation through cigarette pack inserts should consider specific combinations of message topic and imagery. PMID:29415523

A Lateral Differential Resonant Pressure Microsensor Based on SOI-Glass Wafer-Level Vacuum Packaging.

PubMed

Xie, Bo; Xing, Yonghao; Wang, Yanshuang; Chen, Jian; Chen, Deyong; Wang, Junbo

2015-09-21

This paper presents the fabrication and characterization of a resonant pressure microsensor based on SOI-glass wafer-level vacuum packaging. The SOI-based pressure microsensor consists of a pressure-sensitive diaphragm at the handle layer and two lateral resonators (electrostatic excitation and capacitive detection) on the device layer as a differential setup. The resonators were vacuum packaged with a glass cap using anodic bonding and the wire interconnection was realized using a mask-free electrochemical etching approach by selectively patterning an Au film on highly topographic surfaces. The fabricated resonant pressure microsensor with dual resonators was characterized in a systematic manner, producing a quality factor higher than 10,000 (~6 months), a sensitivity of about 166 Hz/kPa and a reduced nonlinear error of 0.033% F.S. Based on the differential output, the sensitivity was increased to two times and the temperature-caused frequency drift was decreased to 25%.

A Lateral Differential Resonant Pressure Microsensor Based on SOI-Glass Wafer-Level Vacuum Packaging

PubMed Central

Xie, Bo; Xing, Yonghao; Wang, Yanshuang; Chen, Jian; Chen, Deyong; Wang, Junbo

2015-01-01

This paper presents the fabrication and characterization of a resonant pressure microsensor based on SOI-glass wafer-level vacuum packaging. The SOI-based pressure microsensor consists of a pressure-sensitive diaphragm at the handle layer and two lateral resonators (electrostatic excitation and capacitive detection) on the device layer as a differential setup. The resonators were vacuum packaged with a glass cap using anodic bonding and the wire interconnection was realized using a mask-free electrochemical etching approach by selectively patterning an Au film on highly topographic surfaces. The fabricated resonant pressure microsensor with dual resonators was characterized in a systematic manner, producing a quality factor higher than 10,000 (~6 months), a sensitivity of about 166 Hz/kPa and a reduced nonlinear error of 0.033% F.S. Based on the differential output, the sensitivity was increased to two times and the temperature-caused frequency drift was decreased to 25%. PMID:26402679

A Review of Patents for the Smart Packaging of Meat and Muscle-based Food Products.

PubMed

Holman, Benjamin; Kerry, Joseph P; Hopkins, David L

2017-10-31

Meat packaging once acted primarily as an inert barrier to protect its contents against contamination and this function has shifted. Packaging now includes complementary functions that improve product quality, longevity and customer/retail appeal. The devices and methods applied to achieve these functions may be categorised as smart packaging, which includes intelligent packaging, devised to monitor and communicate packaged content status, and active packaging, to provide passive adjustment of in-pack conditions from its interactions with the packaged meat. Smart packaging examples already available from recent patents include antimicrobial and antioxidant packaging coatings and inserts; sensors or indicators that identify spoilage and freshness; functional engineering customisations; improvements to packaging integrity; leak or tamper detectors; and, environmentally sustainable options. Together, these inventions respond to industry and customer demands for meat packaging and are therefore the focus of this review, in which we discuss their applications and limitations in meat packaging. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

408-fs SESAM mode locked Cr:ZnSe laser

NASA Astrophysics Data System (ADS)

Bu, Xiangbao; Shi, Yuhang; Xu, Jia; Li, Huijuan; Wang, Pu

2018-01-01

We report self-starting femtosecond operation of a 127-MHz SESAM mode locked Cr:ZnSe laser around 2420 nm. A thulium doped double clad fiber laser at 1908 nm was used as the pumping source. In the normal dispersion regime, stable pulse pairs with constant phase differences in the multipulse regime were observed. The maximum output power was 342 mW with respect to incident pump power of 4.8 W and the corresponding slope efficiency was 10.4%. By inserting a piece of sapphire plate, dispersion compensation was achieved and the intra-cavity dispersion was moved to the anomalous regime. A maximum output power of 403 mW was obtained and the corresponding slope efficiency was 12.2%. Pulse width was measured to be 408 fs by a collinear autocorrelator using two-photon absorption in an InGaAs photodiode. The laser spectrum in multipulse operation showed a clear periodic modulation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

"rsed" is an R package that contains tools for stream editing: manipulating text files by making insertions, replacements, deletions, substitutions, or commenting. It hails from the powerful Unix command, "sed". While the "rsed" package is not nearly as powerful as "see", it is much simpler to use. R programmers often write scripts that may require simple manipulation of text files. "rsed" addresses that need.

Microstructure-Evolution and Reliability Assessment Tool for Lead-Free Component Insertion in Army Electronics

DTIC Science & Technology

2008-10-01

provide adequate means for thermal heat dissipation and cooling. Thus electronic packaging has four main functions [1]: • Signal distribution which... dissipation , involving structural and materials consideration. • Mechanical, chemical and electromagnetic protection of components and... nature when compared to phenomenological models. Microelectronic packaging industry spends typically several months building and reliability

Do package inserts reflect symptoms experienced in practice?: assessment using an automated phone pharmacovigilance system with varenicline and zolpidem in a primary care setting.

PubMed

Haas, Jennifer S; Amato, Mary; Marinacci, Lucas; Orav, E John; Schiff, Gordon D; Bates, David W

2012-08-01

While the US FDA maintains a voluntary reporting system, postmarketing adverse drug events (ADEs) are underreported, and this case report-based system does not allow accurate determination of incidence. The aim of the study was to assess the usefulness of an automated phone pharmacovigilance system for ambulatory patients by comparing systematically collected, patient-reported symptoms to reflect possible ADEs with those reported on the package inserts of two drugs with postmarketing safety concerns, varenicline and zolpidem. English-speaking adults who received a prescription for zolpidem (n = 370) or varenicline (n = 107) from a primary care physician at one of 11 participating clinics, and who participated in the pharmacovigilance system during 2008-2010, were included in the study. Patients were called approximately 4 weeks following their visit and asked to complete a standard script that asked about adherence and pre-specified symptoms. The main outcome measures were elicited rates of pre-specified symptoms or possible ADEs. Compared with the package insert, patients taking zolpidem were significantly (p < 0.001) more likely to report fatigue (9.0% vs 1.0%), itching (4.5% vs 1.0%) and muscle aches (5.6% vs 1.0%). Elicited rates of depression and hallucination were similar to those reported in the package insert. Patients taking varenicline were significantly more likely to report confusion (1.7% vs 0.1%), depression (3.4% vs 0.1%), fatigue (6.0% vs 1.0%), hallucinations (1.7% vs 0.1%), muscle aches (6.0% vs 1.0%) and sexual dysfunction (4.3% vs 0.1%). Automated phone pharmacovigilance can provide estimates of possible ADEs in clinical practice. In the case of varenicline, these data support some of the safety concerns that have come to light postmarketing, while others such as depression and hallucination related to zolpidem were not detected. These data highlight the potential value of, and innovative ways of collecting, information about possible ADEs directly from patients.

Technical Note: Computer-Manufactured Inserts for Prosthetic Sockets

PubMed Central

Sanders, Joan E.; McLean, Jake B.; Cagle, John C.; Gardner, David W.; Allyn, Katheryn J.

2016-01-01

The objective of this research was to use computer-aided design software and a tabletop 3-D additive manufacturing system to design and fabricate custom plastic inserts for trans-tibial prosthesis users. Shape quality of inserts was tested right after they were inserted into participant’s test sockets and again after four weeks of wear. Inserts remained properly positioned and intact throughout testing. Right after insertion the inserts caused the socket to be slightly under-sized, by a mean of 0.11 mm, approximately 55% of the thickness of a nylon sheath. After four weeks of wear the under-sizing was less, averaging 0.03 mm, approximately 15% of the thickness of a nylon sheath. Thus the inserts settled into the sockets over time. If existing prosthetic design software packages were enhanced to conduct insert design and to automatically generate fabrication files for manufacturing, then computer manufactured inserts may offer advantages over traditional methods in terms of speed of fabrication, ease of design, modification, and record keeping. PMID:27212209

Challenges in performance of food safety management systems: a case of fish processing companies in Tanzania.

PubMed

Kussaga, Jamal B; Luning, Pieternel A; Tiisekwa, Bendantunguka P M; Jacxsens, Liesbeth

2014-04-01

This study provides insight for food safety (FS) performance in light of the current performance of core FS management system (FSMS) activities and context riskiness of these systems to identify the opportunities for improvement of the FSMS. A FSMS diagnostic instrument was applied to assess the performance levels of FSMS activities regarding context riskiness and FS performance in 14 fish processing companies in Tanzania. Two clusters (cluster I and II) with average FSMS (level 2) operating under moderate-risk context (score 2) were identified. Overall, cluster I had better (score 3) FS performance than cluster II (score 2 to 3). However, a majority of the fish companies need further improvement of their FSMS and reduction of context riskiness to assure good FS performance. The FSMS activity levels could be improved through hygienic design of equipment and facilities, strict raw material control, proper follow-up of critical control point analysis, developing specific sanitation procedures and company-specific sampling design and measuring plans, independent validation of preventive measures, and establishing comprehensive documentation and record-keeping systems. The risk level of the context could be reduced through automation of production processes (such as filleting, packaging, and sanitation) to restrict people's interference, recruitment of permanent high-skilled technological staff, and setting requirements on product use (storage and distribution conditions) on customers. However, such intervention measures for improvement could be taken in phases, starting with less expensive ones (such as sanitation procedures) that can be implemented in the short term to more expensive interventions (setting up assurance activities) to be adopted in the long term. These measures are essential for fish processing companies to move toward FSMS that are more effective.

Cross-Matching of Very Large Catalogs

NASA Astrophysics Data System (ADS)

Martynov, M. V.; Bodryagin, D. V.

Modern astronomical catalogs and sky surveys, that contain billions of objects, belong to the "big data" data class. Existing available services have limited functionality and do not include all required and available catalogs. The software package ACrId (Astronomical Cross Identification) for cross-matching large astronomical catalogs, which uses an sphere pixelation algorithm HEALPix, ReiserFS file system and JSON-type text files for storage, has been developed at the Research Institution "Mykolaiv Astronomical Observatory".

Reading about over-the-counter medications.

PubMed

Nabors, Laura A; Lehmkuhl, Heather D; Parkins, Irina S; Drury, Anna M

2004-01-01

Many adolescents and young adults purchase and use over-the-counter (OTC) medications, and some may take these medications without reading about how to use them. Most do read package inserts and labels to learn about the medication, but studies examining what influences label reading for youth are needed. This study assessed factors related to label reading for young people, including demographic variables (gender, health status) and the types of information they were seeking about the medication. Eight hundred and seventy-six high school and college students participated, and most reported reading labels or package inserts to learn about medications. Participants experiencing pain were more likely to read labels, except for those experiencing headaches who reported being less likely to read labels. When reading labels, participants were interested in information about side effects, ingredients, dosage instructions, and symptoms treated by the medication. Future research should examine whether youth take medications as directed and what factors make labels and inserts easier to read and understand.

Jig Aligns Shadow Mask On CCD

NASA Technical Reports Server (NTRS)

Matus, Carlos V.

1989-01-01

Alignment viewed through microscope. Alignment jig positions shadow mask on charge-coupled device (CCD) so metal film deposited on it precisely. Allows CCD package to be inserted and removed without disturbing alignment of mask. Holds CCD packages securely and isolates it electrostatically while providing electrical contact to each of its pins. When alignment jig assembled with CCD, used to move mask under micrometer control.

A double Gerdien instrument for simultaneous bipolar air conductivity measurements on balloon platforms.

PubMed

Nicoll, K A; Harrison, R G

2008-08-01

A bipolar air conductivity instrument is described for use with a standard disposable meteorological radiosonde package. It is intended to provide electrical measurements at cloud boundaries, where the ratio of the bipolar air conductivities is affected by the presence of charged particles. The sensors are two identical Gerdien-type electrodes, which, through a voltage decay method, measure positive and negative air conductivities simultaneously. Voltage decay provides a thermally stable approach and a novel low current leakage electrometer switch is described which initiates the decay sequence. The radiosonde supplies power and telemetry, as well as measuring simultaneous meteorological data. A test flight using a tethered balloon determined positive (sigma(+)) and negative (sigma(-)) conductivities of sigma(+)=2.77+/-0.2 fS m(-1) and sigma(-)=2.82+/-0.2 fS m(-1), respectively, at 400 m aloft, with sigma(+)sigma(-)=0.98+/-0.04.

Using PATIMDB to Create Bacterial Transposon Insertion Mutant Libraries

PubMed Central

Urbach, Jonathan M.; Wei, Tao; Liberati, Nicole; Grenfell-Lee, Daniel; Villanueva, Jacinto; Wu, Gang; Ausubel, Frederick M.

2015-01-01

PATIMDB is a software package for facilitating the generation of transposon mutant insertion libraries. The software has two main functions: process tracking and automated sequence analysis. The process tracking function specifically includes recording the status and fates of multiwell plates and samples in various stages of library construction. Automated sequence analysis refers specifically to the pipeline of sequence analysis starting with ABI files from a sequencing facility and ending with insertion location identifications. The protocols in this unit describe installation and use of PATIMDB software. PMID:19343706

A Pre- and Post-Evaluation of Integrating Sustainability Curriculum by Inserting Okala Modules into an Interior Design Materials and Methods Course

ERIC Educational Resources Information Center

Schneiderman, Deborah; Freihoefer, Kara

2012-01-01

Purpose: The purpose of this paper is to examine the integration of Okala curriculum into Interior Design coursework. Okala, as a teaching package, is utilized extensively in industrial design education. However, this study examines the expansion and insertion of Okala modules in an existing interior design curriculum. The Okala modules included…

Unexpected allelic heterogeneity and spectrum of mutations in Fowler syndrome revealed by next-generation exome sequencing.

PubMed

Lalonde, Emilie; Albrecht, Steffen; Ha, Kevin C H; Jacob, Karine; Bolduc, Nathalie; Polychronakos, Constantin; Dechelotte, Pierre; Majewski, Jacek; Jabado, Nada

2010-08-01

Protein coding genes constitute approximately 1% of the human genome but harbor 85% of the mutations with large effects on disease-related traits. Therefore, efficient strategies for selectively sequencing complete coding regions (i.e., "whole exome") have the potential to contribute our understanding of human diseases. We used a method for whole-exome sequencing coupling Agilent whole-exome capture to the Illumina DNA-sequencing platform, and investigated two unrelated fetuses from nonconsanguineous families with Fowler Syndrome (FS), a stereotyped phenotype lethal disease. We report novel germline mutations in feline leukemia virus subgroup C cellular-receptor-family member 2, FLVCR2, which has recently been shown to cause FS. Using this technology, we identified three types of genetic abnormalities: point-mutations, insertions-deletions, and intronic splice-site changes (first pathogenic report using this technology), in the fetuses who both were compound heterozygotes for the disease. Although revealing a high level of allelic heterogeneity and mutational spectrum in FS, this study further illustrates the successful application of whole-exome sequencing to uncover genetic defects in rare Mendelian disorders. Of importance, we show that we can identify genes underlying rare, monogenic and recessive diseases using a limited number of patients (n=2), in the absence of shared genetic heritage and in the presence of allelic heterogeneity.

Mental models in risk assessment: informing people about drugs.

PubMed

Jungermann, H; Schütz, H; Thüring, M

1988-03-01

One way to communicate about the risks of drugs is through the use of package inserts. The problems associated with this medium of informing patients have been investigated by several researchers who found that people require information about drugs they are using, including extensive risk information, and that they are willing to take this information into account in their usage of drugs. But empirical results also show that people easily misinterpret the information given. A conceptual framework is proposed that might be used for better understanding the cognitive processes involved in such a type of risk assessment and communication. It is based on the idea that people develop, through experience, a mental model of how a drug works, which effects it might produce, that contraindications have to be considered, etc. This mental model is "run" when a specific package insert has been read and a specific question arises such as, for example, whether certain symptoms can be explained as normal or whether they require special attention and action. We argue that the mental model approach offers a useful perspective for examining how people understand package inserts, and consequently for improving their content and design. The approach promises to be equally useful for other aspects of risk analysis that are dependent upon human judgment and decision making, e.g., threat diagnosis and human reliability analysis.

Technical note: Computer-manufactured inserts for prosthetic sockets.

PubMed

Sanders, Joan E; McLean, Jake B; Cagle, John C; Gardner, David W; Allyn, Katheryn J

2016-08-01

The objective of this research was to use computer-aided design software and a tabletop 3-D additive manufacturing system to design and fabricate custom plastic inserts for trans-tibial prosthesis users. Shape quality of inserts was tested right after they were inserted into participant's test sockets and again after four weeks of wear. Inserts remained properly positioned and intact throughout testing. Right after insertion the inserts caused the socket to be slightly under-sized, by a mean of 0.11mm, approximately 55% of the thickness of a nylon sheath. After four weeks of wear the under-sizing was less, averaging 0.03mm, approximately 15% of the thickness of a nylon sheath. Thus the inserts settled into the sockets over time. If existing prosthetic design software packages were enhanced to conduct insert design and to automatically generate fabrication files for manufacturing, then computer manufactured inserts may offer advantages over traditional methods in terms of speed of fabrication, ease of design, modification, and record keeping. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Effect of fiber diameter on flexural properties of fiber-reinforced composites.

PubMed

Rezvani, Mohammad Bagher; Atai, Mohammad; Hamze, Faeze

2013-01-01

Flexural strength (FS) is one of the most important properties of restorative dental materials which could be improved in fiber-reinforced composites (FRCs) by several methods including the incorporation of stronger reinforcing fibers. This study evaluates the influence of the glass fiber diameter on the FS and elastic modulus of FRCs at the same weight percentage. A mixture of 2,2-bis-[4-(methacryloxypropoxy)-phenyl]-propaneand triethyleneglycol dimethacrylate (60/40 by weight) was prepared as the matrix phase in which 0.5 wt. % camphorquinone and 0.5 wt. % N-N'-dimethylaminoethyl methacrylate were dissolved as photoinitiator system. Glass fibers with three different diameters (14, 19, and 26 μm) were impregnated with the matrix resin using a soft brush. The FRCs were inserted into a 2 × 2 × 25 mm3 mold and cured using a light curing unit with an intensity of ca. 600 mW/cm2 . The FS of the FRCs was measured in a three-point bending method. The elastic modulus was determined from the slope of the initial linear part of stress-strain curve. The fracture surface of the composites was observed using scanning electron microscopy to study the fiber-matrix interface. The results were analyzed and compared using one-way ANOVA and Tukey's post-hoc test. Although the FS increased as the diameter of fibers increased up to 19 μm (P < 0.05), no significant difference was observed between the composites containing fibers with diameters of 19 and 26 μm. The diameter of the fibers influences the mechanical properties of the FRCs.

Young adult smokers' perceptions of plain packs, numbered packs and pack inserts in Turkey: a focus group study.

PubMed

Mucan, Burcu; Moodie, Crawford

2017-11-09

The Turkish Government's 'National Tobacco Control Program 2015-2018' included plans to introduce plain packaging and also a ban on brand names on cigarette packs, allowing only assigned numbers on packs. We explored perceptions of these proposed measures, and also pack inserts with cessation messages, another novel way of using the packaging to communicate with consumers. Eight focus groups were conducted with 47 young adult smokers in Manisa and Kutahya (Turkey) in December 2016. Participants were shown three straight-edged plain cigarette packs, as required in Australia, and then three bevelled-edged plain packs, as permitted in the UK. They were then shown plain packs with numbers rather than brand names, and finally three pack inserts with messages encouraging quitting or offering tips on how to do so. Participants were asked about their perceptions of each. Plain packs were considered unappealing and off-putting, although the bevelled-edged packs were viewed more favourably than the straight-edged packs. Numbered packs were thought by some to diminish the appeal created by the brand name and potentially decrease interest among never smokers and newer smokers. Pack inserts were thought to have less of an impact than the on-pack warnings, but could potentially help discourage initiation and encourage cessation. That bevelled-edged plain packs were perceived more positively than straight-edged plain packs is relevant to countries planning to introduce plain packaging. The study provides a first insight into smokers' perceptions of a ban on brand names, which was perceived to reduce appeal among young people. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Evaluation of strategies to communicate harmful and potentially harmful constituent (HPHC) information through cigarette package inserts: a discrete choice experiment.

PubMed

Salloum, Ramzi G; Louviere, Jordan J; Getz, Kayla R; Islam, Farahnaz; Anshari, Dien; Cho, Yoojin; O'Connor, Richard J; Hammond, David; Thrasher, James F

2017-07-13

The US Food and Drug Administration (FDA) has regulatory authority to use inserts to communicate with consumers about harmful and potentially harmful constituents (HPHCs) in tobacco products; however, little is known about the most effective manner for presenting HPHC information. In a discrete choice experiment, participants evaluated eight choice sets, each of which showed two cigarette packages from four different brands and tar levels (high vs low), accompanied by an insert that included between-subject manipulations (ie, listing of HPHCs vs grouping by disease outcome and numeric values ascribed to HPHCs vs no numbers) and within-subject manipulations (ie, 1 of 4 warning topics; statement linking an HPHC with disease vs statement with no HPHC link). For each choice set, participants were asked: (1) which package is more harmful and (2) which motivates them to not smoke; each with a 'no difference' option. Alternative-specific logit models regressed choice on attribute levels. 1212 participants were recruited from an online consumer panel (725 18-29-year-old smokers and susceptible non-smokers and 487 30-64-year-old smokers). Participants were more likely to endorse high-tar products as more harmful than low-tar products, with a greater effect when numeric HPHC information was present. Compared with a simple warning statement, the statement linking HPHCs with disease encouraged quit motivation. Numeric HPHC information on inserts appears to produce misunderstandings that some cigarettes are less harmful than others. Furthermore, brief narratives that link HPHCs to smoking-related disease may promote cessation versus communications that do not explicitly link HPHCs to disease. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Developing targets for radiation transport experiments at the Omega laser facility

DOE PAGES

Capelli, Deanna; Charsley-Groffman, C. A.; Randolph, Randall Blaine; ...

2017-07-13

Targets have been developed to measure supersonic radiation transport in aerogel foams using absorption spectroscopy. The target consists of an aerogel foam uniformly doped with either titanium or scandium inserted into an undoped aerogel foam package. This creates a localized doped foam region to provide spatial resolution for the measurement. Development and characterization of the foams is a key challenge in addition to machining and assembling the two foams so they mate without gaps. The foam package is inserted into a beryllium sleeve and mounted on a gold hohlraum. The target is mounted to a holder created using additive manufacturingmore » and mounted on a stalk. As a result, the manufacturing of the components, along with assembly and metrology of the target are described here.« less

Developing targets for radiation transport experiments at the Omega laser facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Capelli, Deanna; Charsley-Groffman, C. A.; Randolph, Randall Blaine

Targets have been developed to measure supersonic radiation transport in aerogel foams using absorption spectroscopy. The target consists of an aerogel foam uniformly doped with either titanium or scandium inserted into an undoped aerogel foam package. This creates a localized doped foam region to provide spatial resolution for the measurement. Development and characterization of the foams is a key challenge in addition to machining and assembling the two foams so they mate without gaps. The foam package is inserted into a beryllium sleeve and mounted on a gold hohlraum. The target is mounted to a holder created using additive manufacturingmore » and mounted on a stalk. As a result, the manufacturing of the components, along with assembly and metrology of the target are described here.« less

Development of Sub-optimal Airway Protocols for the International Space Station (ISS) by the Medical Operation Support Team (MOST)

NASA Technical Reports Server (NTRS)

Polk, James D.; Parazynski, Scott; Kelly, Scott; Hurst, Victor, IV; Doerr, Harold K.

2007-01-01

Airway management techniques are necessary to establish and maintain a patent airway while treating a patient undergoing respiratory distress. There are situations where such settings are suboptimal, thus causing the caregiver to adapt to these suboptimal conditions. Such occurrences are no exception aboard the International Space Station (ISS). As a result, the NASA flight surgeon (FS) and NASA astronaut cohorts must be ready to adapt their optimal airway management techniques for suboptimal situations. Based on previous work conducted by the Medical Operation Support Team (MOST) and other investigators, the MOST had members of both the FS and astronaut cohorts evaluate two oral airway insertion techniques for the Intubating Laryngeal Mask Airway (ILMA) to determine whether either technique is sufficient to perform in suboptimal conditions within a microgravity environment. Methods All experiments were conducted in a simulated microgravity environment provided by parabolic flight aboard DC-9 aircraft. Each participant acted as a caregiver and was directed to attempt both suboptimal ILMA insertion techniques following a preflight instruction session on the day of the flight and a demonstration of the technique by an anesthesiologist physician in the simulated microgravity environment aboard the aircraft. Results Fourteen participants conducted 46 trials of the suboptimal ILMA insertion techniques. Overall, 43 of 46 trials (94%) conducted were properly performed based on criteria developed by the MOST and other investigators. Discussion The study demonstrated the use of airway management techniques in suboptimal conditions relating to space flight. Use of these techniques will provide a crew with options for using the ILMA to manage airway issues aboard the ISS. Although it is understood that the optimal method for patient care during space flight is to have both patient and caregiver restrained, these techniques provide a needed backup should conditions not present themselves in an ideal manner.

Passively mode-locked tunable fiber laser in a soliton regime

NASA Astrophysics Data System (ADS)

Endo, Michiyuki; Ghosh, Gorachand

1999-04-01

A stable, passively mode-locked erbium-doped fiber resonator is developed to generate tunable optical pulses with durations of 270 - 325 fs in the soliton regime. The lasing wavelength is tuned continuously over a wavelength range of 60 nm by rotating a bulk band-pass filter inserted in the resonator with a repetition frequency of 45.4 MHz. We reduced the timing jitter by minimizing the intensity fluctuation of the pump source using a feedback loop and by controlling the influence of airflow and temperature fluctuation of the resonator in a sealed box.

Pilot Fullerton prepares meal on middeck

NASA Image and Video Library

1982-03-30

STS003-26-253 (30 March 1982) --- Astronaut Gordon Fullerton, STS-3 pilot, wearing communications kit assembly (assy) mini-headset (HDST), prepares meal on middeck. Fullerton clips corner of rehydratable food (cereal) package with scissors. The opening will allow Fullerton to insert JSC water dispenser kit water gun in order to heat contents with hot water. Meal tray assembly is secured to forward middeck locker and holds additional food packages and beverage containers. Photo credit: NASA

Negatively-chirped laser enables nonlinear excitation and nanoprocessing with sub-20-fs pulses

NASA Astrophysics Data System (ADS)

Uchugonova, A.; Müller, J.; Bückle, R.; Tempea, G.; Isemann, A.; Stingl, A.; König, K.

2008-02-01

It has long been considered that the advantages emerging from employing chirp pre-compensation in nonlinear microscopy were overweighed by the complexity of prism- or grating-based compressors. These concerns were refuted with the advent of dispersive-mirrors-based compressors that are compact, user-friendly and sufficiently accurate to support sub-20-fs pulse delivery. Recent advances in the design of dispersive multilayer mirrors resulted in improved bandwidth (covering now as much as half of the gain bandwidth of Ti:Sapphire) and increased dispersion per bounce (one reflection off a state-of-the-art dispersive mirror pre-compensates the dispersion corresponding to >10mm of glass). The compressor built with these mirrors is sufficiently compact to be integrated in the housing of a sub-12-fs Ti:Sapphire oscillator. A complete scanning nonlinear microscope (FemtOgene, JenLab GmbH) equipped with highly-dispersive, large-NA objectives (Zeiss EC Plan-Neofluoar 40x/1.3, Plan-Neofluar 63x/1,25 Oil) was directly seeded with this negatively chirped laser. The pulse duration was measured at the focus of the objectives by inserting a scanning autocorrelator in the beam path between the laser and the microscope and recording the second order interferometric autocorrelation traces with the detector integrated in the microscope. Pulse durations <20fs were measured with both objectives. The system has been applied for two-photon imaging, transfection and optical manipulation of stem cells. Here we report on the successful transfection of human stem cells by transient optoporation of the cell membrane with a low mean power of < 7 mW and a short μs beam dwell time. Optically transfected cells were able to reproduce. The daughter cell expressed also green fluorescent proteins (GFP) indicating the successful modification of the cellular DNA.

Studies on the Expression of Sesquiterpene Synthases Using Promoter-β-Glucuronidase Fusions in Transgenic Artemisia annua L

PubMed Central

Wang, Hongzhen; Han, Junli; Kanagarajan, Selvaraju; Lundgren, Anneli; Brodelius, Peter E.

2013-01-01

In order to better understand the influence of sesquiterpene synthases on artemisinin yield in Artemisia annua, the expression of some sesquiterpene synthases has been studied using transgenic plants expressing promoter-GUS fusions. The cloned promoter sequences were 923, 1182 and 1510 bp for β-caryophyllene (CPS), epi-cedrol (ECS) and β-farnesene (FS) synthase, respectively. Prediction of cis-acting regulatory elements showed that the promoters are involved in complex regulation of expression. Transgenic A. annua plants carrying promoter-GUS fusions were studied to elucidate the expression pattern of the three sesquiterpene synthases and compared to the previously studied promoter of amorpha-4,11-diene synthase (ADS), a key enzyme of artemisinin biosynthesis. The CPS and ECS promoters were active in T-shaped trichomes of leaves and stems, basal bracts of flower buds and also in some florets cells but not in glandular secretory trichome while FS promoter activity was only observed in leaf cells and trichomes of transgenic shoots. ADS, CPS, ECS and FS transcripts were induced by wounding in a time depended manner. The four sesquiterpene synthases may be involved in responsiveness of A. annua to herbivory. Methyl jasmonate treatment triggered activation of the promoters of all four sesquiterpene synthases in a time depended manner. Southern blot result showed that the GUS gene was inserted into genomic DNA of transgenic lines as a single copy or two copies. The relative amounts of CPS and ECS as well as germacrene A synthase (GAS) transcripts are much lower than that of ADS transcript. Consequently, down-regulation of the expression of the CPS, ECS or GAS gene may not improve artemsinin yield. However, blocking the expression of FS may have effects on artemisinin production. PMID:24278301

Application of Au-Sn eutectic bonding in hermetic radio-frequency microelectromechanical system wafer level packaging

NASA Astrophysics Data System (ADS)

Wang, Qian; Choa, Sung-Hoon; Kim, Woonbae; Hwang, Junsik; Ham, Sukjin; Moon, Changyoul

2006-03-01

Development of packaging is one of the critical issues toward realizing commercialization of radio-frequency-microelectromechanical system (RF-MEMS) devices. The RF-MEMS package should be designed to have small size, hermetic protection, good RF performance, and high reliability. In addition, packaging should be conducted at sufficiently low temperature. In this paper, a low-temperature hermetic wafer level packaging scheme for the RF-MEMS devices is presented. For hermetic sealing, Au-Sn eutectic bonding technology at temperatures below 300°C is used. Au-Sn multilayer metallization with a square loop of 70 µm in width is performed. The electrical feed-through is achieved by the vertical through-hole via filling with electroplated Cu. The size of the MEMS package is 1 mm × 1 mm × 700 µm. The shear strength and hermeticity of the package satisfies the requirements of MIL-STD-883F. Any organic gases or contamination are not observed inside the package. The total insertion loss for the packaging is 0.075 dB at 2 GHz. Furthermore, the robustness of the package is demonstrated by observing no performance degradation and physical damage of the package after several reliability tests.

Development of Multifunctional Active Film and Its Application in Modified Atmosphere Packaging of Shiitake Mushrooms.

PubMed

Wang, Hong Jiang; An, Duck Soon; Lee, Dong Sun

2016-09-01

Agar-based films with multiple functions (CO 2 absorption, water vapor absorption, and antimicrobial activity) were developed, tested for their properties, and then applied to the packaging of fresh shiitake mushrooms as an insert label. The films were cast from an agar-based aqueous solution containing a dissolving plasticizer (glycerol), a CO 2 absorbent (sodium carbonate [SC] alone or a combination of SC and sodium glycinate [SC-SG]), and a volatile antimicrobial agent (carvacrol [CRV]). The agar of the film matrix is designed to serve as a water vapor absorbent. The multifunctional films tended to have poor mechanical properties, with a hard texture and an opaque and yellowish color. The CO 2 absorbent, either SC alone or SC-SG, affected CRV retention and release along with the CO 2 and water vapor absorption behavior. Both films (SC-CRV and SC-SG-CRV films) showed good inhibitory effects against Pseudomonas fluorescens and Saccharomyces cerevisiae . SC-CRV film had a higher and faster CO 2 absorption property, higher retention and extended release of CRV, and lower and slower water vapor absorption and was assessed to be better suited for use in shiitake mushroom packaging. The packaging in which the SC-CRV film with an appropriate amount of CRV was used as an insert label was able to generate the desired atmosphere and less moisture condensation inside the package, producing the best preservation of quality in terms of mushroom color, firmness, flavor score, and microbial counts after 6 days of storage at 10°C. A tailored modified atmosphere packaging system using multifunctional film would be useful in the preservation of CO 2 -sensitive fresh commodities.

Raman Spectroscopy Differentiates Each Tissue From the Skin to the Spinal Cord: A Novel Method for Epidural Needle Placement?

PubMed Central

Anderson, T. Anthony; Kang, Jeon Woong; Gubin, Tatyana; Dasari, Ramachandra R.; So, Peter T. C.

2016-01-01

BACKGROUND Neuraxial anesthesia and epidural steroid injection techniques require precise anatomical targeting to ensure successful and safe analgesia. Previous studies suggest that only some of the tissues encountered during these procedures can be identified by spectroscopic methods, and no previous study has investigated the use of Raman, diffuse reflectance, and fluorescence spectroscopies. The authors hypothesized that real-time needle-tip spectroscopy may aid epidural needle placement and tested the ability of spectroscopy to distinguish each of the tissues in the path of neuraxial needles. METHODS For comparison of detection methods, the spectra of individual, dissected ex vivo paravertebral and neuraxial porcine tissues were collected using Raman spectroscopy (RS), diffuse reflectance spectroscopy (DRS), and fluorescence spectroscopy (FS). Real-time spectral guidance was tested using a 2 mm inner diameter fiber optic probe-in-needle device. Raman spectra were collected during the needle’s passage through intact paravertebral and neuraxial porcine tissue and analyzed afterward. The RS tissue signatures were verified as mapping to individual tissue layers using histochemical staining and widefield microscopy. RESULTS Raman spectroscopy revealed a unique spectrum for all ex vivo paravertebral and neuraxial tissue layers; DRS and FS spectra were not distinct for all tissues. Moreover, when accounting for the expected order of tissues, real-time Raman spectra recorded during needle insertion also permitted identification of each paravertebral and neuraxial porcine tissue. CONCLUSIONS This study demonstrates Raman spectroscopy can distinguish the tissues encountered during epidural needle insertion. This technology may prove useful during needle placement by providing evidence of its anatomical localization. PMID:27466032

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smit, C; Plessis, F du

Purpose: To extract the electron contamination energy spectra for an Elekta Precise Linac, based on pure photon and measured clinical beam percentage depth dose data. And to include this as an additional source in isource 4 in DOSXYZnrc. Methods: A pure photon beam was simulated for the Linac using isource 4 in the DOSXYZnrc Monte Carlo (MC) code. Percentage depth dose (PDD) data were extracted afterwards for a range of field sizes (FS). These simulated dose data were compared to actual measured dose PDD data, with the data normalized at 10 cm depth. The resulting PDD data resembled the electronmore » contamination depth dose. Since the dose fall-off is a strictly decreasing function, a method was adopted to derive the contamination electron spectrum. Afterwards this spectrum was used in a DOSXYZnrc MC simulation run to verify that the original electron depth dose could be replicated. Results: Various square aperture FS’s for 6, 8 and 15 megavolt (MV) photon beams were modeled, simulated and compared to their respective actual measured PDD data. As FS increased, simulated pure photon depth-dose profiles shifted deeper, thus requiring electron contamination to increase the surface dose. The percentage of electron weight increased with increase in FS. For a FS of 15×15 cm{sup 2}, the percentage electron weight is 0.1%, 0.2% and 0.4% for 6, 8 and 15 MV beams respectively. Conclusion: From the PDD results obtained, an additional electron contamination source was added to the photon source model so that simulation and measured PDD data could match within 2 % / 2 mm gamma-index criteria. The improved source model could assure more accurate simulations of surface doses. This research project was funded by the South African Medical Research Council (MRC) with funds from National Treasury under its Economic Competitiveness and Support package.« less

DECIPHER, a Search-Based Approach to Chimera Identification for 16S rRNA Sequences

PubMed Central

Wright, Erik S.; Yilmaz, L. Safak

2012-01-01

DECIPHER is a new method for finding 16S rRNA chimeric sequences by the use of a search-based approach. The method is based upon detecting short fragments that are uncommon in the phylogenetic group where a query sequence is classified but frequently found in another phylogenetic group. The algorithm was calibrated for full sequences (fs_DECIPHER) and short sequences (ss_DECIPHER) and benchmarked against WigeoN (Pintail), ChimeraSlayer, and Uchime using artificially generated chimeras. Overall, ss_DECIPHER and Uchime provided the highest chimera detection for sequences 100 to 600 nucleotides long (79% and 81%, respectively), but Uchime's performance deteriorated for longer sequences, while ss_DECIPHER maintained a high detection rate (89%). Both methods had low false-positive rates (1.3% and 1.6%). The more conservative fs_DECIPHER, benchmarked only for sequences longer than 600 nucleotides, had an overall detection rate lower than that of ss_DECIPHER (75%) but higher than those of the other programs. In addition, fs_DECIPHER had the lowest false-positive rate among all the benchmarked programs (<0.20%). DECIPHER was outperformed only by ChimeraSlayer and Uchime when chimeras were formed from closely related parents (less than 10% divergence). Given the differences in the programs, it was possible to detect over 89% of all chimeras with just the combination of ss_DECIPHER and Uchime. Using fs_DECIPHER, we detected between 1% and 2% additional chimeras in the RDP, SILVA, and Greengenes databases from which chimeras had already been removed with Pintail or Bellerophon. DECIPHER was implemented in the R programming language and is directly accessible through a webpage or by downloading the program as an R package (http://DECIPHER.cee.wisc.edu). PMID:22101057

9 CFR 381.123 - Official inspection mark; official establishment number.

Code of Federal Regulations, 2011 CFR

2011-01-01

... label of a canned product, or on other packaging or labeling in the container, e.g., on aluminum pans... insert label placed under a transparent covering if clearly visible and legible and accompanied by the...

9 CFR 381.123 - Official inspection mark; official establishment number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... label of a canned product, or on other packaging or labeling in the container, e.g., on aluminum pans... insert label placed under a transparent covering if clearly visible and legible and accompanied by the...

Microbial viability in preparations packaged for single use.

PubMed

Obayashi, Akiko; Oie, Shigeharu; Kamiya, Akira

2003-05-01

We evaluated microbial viability in preparations packaged for single use only which mandate that residual solution be discarded such as albumin and globulin preparations as blood products, preparations containing albumin (such as urokinase and interferon), fat emulsions, and a preparation containing fat emulsions (propofol). In most preparations, Serratia marcescens and Burkholderia cepacia proliferated rapidly at 30 degrees C. However, in globulin preparations containing 1-2.25% glycine to prevent protein degradation (Gamma-Venin P, Venilon-I, Globulin Injection, and Ahlbulin), no growth of S. marcescens and B. cepacia was detected over 24 h at 30 degrees C. For globulin preparations containing 1-2.25% glycine, the injunction to "Discard residual solution after the package has been used" in the package inserts can be revised to "It is possible to use residual solution within 24 h after the package has been used with storage in a cool place."

Method of forming a package for MEMS-based fuel cell

DOEpatents

Morse, Jeffrey D; Jankowski, Alan F

2013-05-21

A MEMS-based fuel cell package and method thereof is disclosed. The fuel cell package comprises seven layers: (1) a sub-package fuel reservoir interface layer, (2) an anode manifold support layer, (3) a fuel/anode manifold and resistive heater layer, (4) a Thick Film Microporous Flow Host Structure layer containing a fuel cell, (5) an air manifold layer, (6) a cathode manifold support structure layer, and (7) a cap. Fuel cell packages with more than one fuel cell are formed by positioning stacks of these layers in series and/or parallel. The fuel cell package materials such as a molded plastic or a ceramic green tape material can be patterned, aligned and stacked to form three dimensional microfluidic channels that provide electrical feedthroughs from various layers which are bonded together and mechanically support a MEMS-based miniature fuel cell. The package incorporates resistive heating elements to control the temperature of the fuel cell stack. The package is fired to form a bond between the layers and one or more microporous flow host structures containing fuel cells are inserted within the Thick Film Microporous Flow Host Structure layer of the package.

Method of forming a package for mems-based fuel cell

DOEpatents

Morse, Jeffrey D.; Jankowski, Alan F.

2004-11-23

A MEMS-based fuel cell package and method thereof is disclosed. The fuel cell package comprises seven layers: (1) a sub-package fuel reservoir interface layer, (2) an anode manifold support layer, (3) a fuel/anode manifold and resistive heater layer, (4) a Thick Film Microporous Flow Host Structure layer containing a fuel cell, (5) an air manifold layer, (6) a cathode manifold support structure layer, and (7) a cap. Fuel cell packages with more than one fuel cell are formed by positioning stacks of these layers in series and/or parallel. The fuel cell package materials such as a molded plastic or a ceramic green tape material can be patterned, aligned and stacked to form three dimensional microfluidic channels that provide electrical feedthroughs from various layers which are bonded together and mechanically support a MEMOS-based miniature fuel cell. The package incorporates resistive heating elements to control the temperature of the fuel cell stack. The package is fired to form a bond between the layers and one or more microporous flow host structures containing fuel cells are inserted within the Thick Film Microporous Flow Host Structure layer of the package.

Integration of HIV in the Human Genome: Which Sites Are Preferential? A Genetic and Statistical Assessment

PubMed Central

Gonçalves, Juliana; Moreira, Elsa; Sequeira, Inês J.; Rodrigues, António S.; Rueff, José; Brás, Aldina

2016-01-01

Chromosomal fragile sites (FSs) are loci where gaps and breaks may occur and are preferential integration targets for some viruses, for example, Hepatitis B, Epstein-Barr virus, HPV16, HPV18, and MLV vectors. However, the integration of the human immunodeficiency virus (HIV) in Giemsa bands and in FSs is not yet completely clear. This study aimed to assess the integration preferences of HIV in FSs and in Giemsa bands using an in silico study. HIV integration positions from Jurkat cells were used and two nonparametric tests were applied to compare HIV integration in dark versus light bands and in FS versus non-FS (NFSs). The results show that light bands are preferential targets for integration of HIV-1 in Jurkat cells and also that it integrates with equal intensity in FSs and in NFSs. The data indicates that HIV displays different preferences for FSs compared to other viruses. The aim was to develop and apply an approach to predict the conditions and constraints of HIV insertion in the human genome which seems to adequately complement empirical data. PMID:27294106

Body of Knowledge (BOK) for Leadless Quad Flat No-Lead/bottom Termination Components (QFN/BTC) Package Trends and Reliability

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2014-01-01

Bottom terminated components and quad flat no-lead (BTC/QFN) packages have been extensively used by commercial industry for more than a decade. Cost and performance advantages and the closeness of the packages to the boards make them especially unique for radio frequency (RF) applications. A number of high-reliability parts are now available in this style of package configuration. This report presents a summary of literature surveyed and provides a body of knowledge (BOK) gathered on the status of BTC/QFN and their advanced versions of multi-row QFN (MRQFN) packaging technologies. The report provides a comprehensive review of packaging trends and specifications on design, assembly, and reliability. Emphasis is placed on assembly reliability and associated key design and process parameters because they show lower life than standard leaded package assembly under thermal cycling exposures. Inspection of hidden solder joints for assuring quality is challenging and is similar to ball grid arrays (BGAs). Understanding the key BTC/QFN technology trends, applications, processing parameters, workmanship defects, and reliability behavior is important when judicially selecting and narrowing the follow-on packages for evaluation and testing, as well as for the low risk insertion in high-reliability applications.

Antimicrobial, antioxidant and sensory features of eugenol, carvacrol and trans-anethole in active packaging for organic ready-to-eat iceberg lettuce.

PubMed

Wieczyńska, Justyna; Cavoski, Ivana

2018-09-01

In this study, bio-based emitting sachets containing eugenol (EUG), carvacrol (CAR) and trans-anethole (ANT) were inserted into cellulose (CE) and polypropylene (PP) pillow packages of organic ready-to-eat (RTE) iceberg lettuce to investigate their functional features. EUG, CAR and ANT sachets in CE; and CAR in PP packages showed antimicrobial activities against coliforms (Δlog CFU g -1 of -1.38, -0.91, -0.93 and -0.93, respectively). EUG and ANT sachets in both packages reduced discoloration (ΔE of 9.5, 1.8, 9.4 and 5.6, respectively). ANT in both, and EUG only in PP packages induced biosynthesis of caffeoyl derivatives (C a T A , D i C a T A , D i C a Q A ), total phenolics and antioxidant activity (FRAP). Also, ANT and EUG in both packages improved overall freshness and odor. Principal component analysis separated ANT and EUG from CAR in both packages. The Pearson correlation confirmed that overall quality improvements were more pronounced by ANT inside the packages in comparison to EUG and CAR. Copyright © 2018 Elsevier Ltd. All rights reserved.

Body of Knowledge (BOK) for Leadless Quad Flat No-Lead/Bottom Termination Components (QFN/BTC) Package Trends and Reliability

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2014-01-01

Bottom terminated components and quad flat no-lead (BTC/QFN) packages have been extensively used by commercial industry for more than a decade. Cost and performance advantages and the closeness of the packages to the boards make them especially unique for radio frequency (RF) applications. A number of high-reliability parts are now available in this style of package configuration. This report presents a summary of literature surveyed and provides a body of knowledge (BOK) gathered on the status of BTC/QFN and their advanced versions of multi-row QFN (MRQFN) packaging technologies. The report provides a comprehensive review of packaging trends and specifications on design, assembly, and reliability. Emphasis is placed on assembly reliability and associated key design and process parameters because they show lower life than standard leaded package assembly under thermal cycling exposures. Inspection of hidden solder joints for assuring quality is challenging and is similar to ball grid arrays (BGAs). Understanding the key BTC/QFN technology trends, applications, processing parameters, workmanship defects, and reliability behavior is important when judicially selecting and narrowing the follow-on packages for evaluation and testing, as well as for the low risk insertion in high-reliability applications.

Fuzzy based attitude controller for flexible spacecraft with on/off thrusters

NASA Astrophysics Data System (ADS)

Knapp, Roger G.; Adams, Neil J.

A fuzzy-based attitude controller is designed for attitude control of a generic spacecraft with on/off thrusters. The controller is comprised of packages of rules dedicated to addressing different objectives (e.g., disturbance rejection, low fuel consumption, avoiding the excitation of flexible appendages, etc.). These rule packages can be inserted or removed depending on the requirements of the particular spacecraft and are parameterized based on vehicle parameters such as inertia or operational parameters such as the maneuvering rate. Individual rule packages can be 'weighted' relative to each other to emphasize the importance of one objective relative to another. Finally, the fuzzy controller and rule packages are demonstrated using the high-fidelity Space Shuttle Interactive On-Orbit Simulator (IOS) while performing typical on-orbit operations and are subsequently compared with the existing shuttle flight control system performance.

Fuzzy based attitude controller for flexible spacecraft with on/off thrusters

NASA Astrophysics Data System (ADS)

Knapp, Roger Glenn

1993-05-01

A fuzzy-based attitude controller is designed for attitude control of a generic spacecraft with on/off thrusters. The controller is comprised of packages of rules dedicated to addressing different objectives (e.g., disturbance rejection, low fuel consumption, avoiding the excitation of flexible appendages, etc.). These rule packages can be inserted or removed depending on the requirements of the particular spacecraft and are parameterized based on vehicle parameters such as inertia or operational parameters such as the maneuvering rate. Individual rule packages can be 'weighted' relative to each other to emphasize the importance of one objective relative to another. Finally, the fuzzy controller and rule packages are demonstrated using the high-fidelity Space Shuttle Interactive On-Orbit Simulator (IOS) while performing typical on-orbit operations and are subsequently compared with the existing shuttle flight control system performance.

21 CFR 660.25 - Potency tests without reference preparations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... manufacturer's package insert using red blood cells showing heterozygous or diminished expression of the... SERVICES (CONTINUED) BIOLOGICS ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS Blood Grouping Reagent § 660.25 Potency tests without reference preparations. Products for which Reference Blood...

21 CFR 660.25 - Potency tests without reference preparations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... manufacturer's package insert using red blood cells showing heterozygous or diminished expression of the... SERVICES (CONTINUED) BIOLOGICS ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS Blood Grouping Reagent § 660.25 Potency tests without reference preparations. Products for which Reference Blood...

21 CFR 660.25 - Potency tests without reference preparations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... manufacturer's package insert using red blood cells showing heterozygous or diminished expression of the... SERVICES (CONTINUED) BIOLOGICS ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS Blood Grouping Reagent § 660.25 Potency tests without reference preparations. Products for which Reference Blood...

21 CFR 660.25 - Potency tests without reference preparations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... manufacturer's package insert using red blood cells showing heterozygous or diminished expression of the... SERVICES (CONTINUED) BIOLOGICS ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS Blood Grouping Reagent § 660.25 Potency tests without reference preparations. Products for which Reference Blood...

21 CFR 660.25 - Potency tests without reference preparations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... manufacturer's package insert using red blood cells showing heterozygous or diminished expression of the... SERVICES (CONTINUED) BIOLOGICS ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS Blood Grouping Reagent § 660.25 Potency tests without reference preparations. Products for which Reference Blood...

Posterior leaflet preservation during mitral valve replacement for rheumatic mitral stenosis.

PubMed

Djukić, P L; Obrenović-Kirćanski, B B; Vranes, M R; Kocica, M J; Mikić, A Dj; Velinović, M M; Kacar, S M; Kovacević, N S; Parapid, B J

2006-01-01

Mitral valve replacement with posterior leaflet preservation was shown beneficial for postoperative left vetricular (LV) performance in patients with mitral regurgitation. Some authors find it beneficial even for the long term LV function. We investigated a long term effect of this technique in patients with rheumatic mitral stenosis. We studied 20 patents with mitral valve replacement due to rheumatic mitral stenosis, in the period from January 1988 to December 1989. In group A (10 patients) both leaflets and coresponding chordal excision was performed, while in group B (10 patients) the posterior leaflet was preserved. In all patients a Carbomedics valve was inserted. We compared clinical pre and postoperative status, as well as hemodynamic characteristics of the valve and left ventricle in both groups. Control echocardiographyc analysis included: maximal (PG) and mean (MG) gradients; effective valve area (AREA); telediastolic (TDV) and telesystolic (TSV) LV volume; stroke volume (SV); ejection fraction (EF); fractional shortening (FS) and segmental LV motion. The mean size of inserted valve was 26.6 in group A and 27.2 in group B. Hemodynamic data: PG (10.12 vs 11.1); MG (3.57 vs 3.87); AREA (2.35 vs 2.30); TDV 126.0 vs 114.5); TSV (42.2 vs 36.62); SV (83.7 vs 77.75); EF (63.66 vs 67.12); FS (32.66 vs 38.25). Diaphragmal segmental hypokinesis was evident in one patient from group A and in two patients from group B. In patients with rheumatic stenosis, posterior leaflet preservation did not have increased beneficial effect on left ventricular performance during long-term follow-up. An adequate posterior leaflet preservation does not change hemodynamic valvular characteristics even after long-term follow-up.

A Tale of Two Citizens: A State Attorney General and a Hematologist Facilitate Translation of Research Into US Food and Drug Administration Actions—A SONAR Report

PubMed Central

Chen, Brian; Restaino, John; Norris, LeAnn; Xirasagar, Sudha; Qureshi, Zaina P.; McKoy, June M.; Lopez, Isaac S.; Trenery, Alyssa; Murday, Alanna; Kahn, Adam; Mattison, Donald R.; Ray, Paul; Sartor, Oliver; Bennett, Charles L.

2012-01-01

Purpose: Pharmaceutical safety is a public health issue. In 2005, the Connecticut Attorney General (AG) raised concerns over adverse drug reactions in off-label settings, noting that thalidomide was approved to treat a rare illness, but more than 90% of its use was off label. A hematologist had reported thalidomide with doxorubicin or dexamethasone was associated with venous thromboembolism (VTE) rates of 25%. We review US Food and Drug Administration (FDA) and manufacturer responses to a citizen petition filed to address these thalidomide safety issues. Methods: Case study. Results: The AG petitioned the FDA requesting thalidomide-related safety actions. Coincidentally, the manufacturer submitted a supplemental New Drug Approval (sNDA), requesting approval to treat multiple myeloma with thalidomide-dexamethasone. FDA safety officers reviewed the petition and the literature and noted that VTE risks with thalidomide were not appropriately addressed in the existing package insert. In the sNDA application, the manufacturer reported thalidomide-associated toxicities for multiple myeloma were primarily somnolence and neurotoxicity, and a proposed package insert did not focus on VTE risks. In October, the FDA informed the Oncology Drug Division that VTE risks with thalidomide were poorly addressed in the existing label. After reviewing this memorandum, an Oncology Drug Division reviewer informed the manufacturer that approval of the sNDA would be delayed until several thalidomide-associated VTE safety actions, including revisions of the package insert, were implemented. The manufacturer and FDA agreed on these actions, and the sNDA was approved. Conclusion: New approaches addressing off-label safety are needed. The conditions that facilitated the successful response to this citizen petition are uncommon. PMID:23598851

A tale of two citizens: a State Attorney General and a hematologist facilitate translation of research into US Food and Drug Administration actions--a SONAR report.

PubMed

Chen, Brian; Restaino, John; Norris, LeAnn; Xirasagar, Sudha; Qureshi, Zaina P; McKoy, June M; Lopez, Isaac S; Trenery, Alyssa; Murday, Alanna; Kahn, Adam; Mattison, Donald R; Ray, Paul; Sartor, Oliver; Bennett, Charles L

2012-11-01

Pharmaceutical safety is a public health issue. In 2005, the Connecticut Attorney General (AG) raised concerns over adverse drug reactions in off-label settings, noting that thalidomide was approved to treat a rare illness, but more than 90% of its use was off label. A hematologist had reported thalidomide with doxorubicin or dexamethasone was associated with venous thromboembolism (VTE) rates of 25%. We review US Food and Drug Administration (FDA) and manufacturer responses to a citizen petition filed to address these thalidomide safety issues. Case study. The AG petitioned the FDA requesting thalidomide-related safety actions. Coincidentally, the manufacturer submitted a supplemental New Drug Approval (sNDA), requesting approval to treat multiple myeloma with thalidomide-dexamethasone. FDA safety officers reviewed the petition and the literature and noted that VTE risks with thalidomide were not appropriately addressed in the existing package insert. In the sNDA application, the manufacturer reported thalidomide-associated toxicities for multiple myeloma were primarily somnolence and neurotoxicity, and a proposed package insert did not focus on VTE risks. In October, the FDA informed the Oncology Drug Division that VTE risks with thalidomide were poorly addressed in the existing label. After reviewing this memorandum, an Oncology Drug Division reviewer informed the manufacturer that approval of the sNDA would be delayed until several thalidomide-associated VTE safety actions, including revisions of the package insert, were implemented. The manufacturer and FDA agreed on these actions, and the sNDA was approved. New approaches addressing off-label safety are needed. The conditions that facilitated the successful response to this citizen petition are uncommon.

A Web-based searchable system to confirm magnetic resonance compatibility of implantable medical devices in Japan: a preliminary study.

PubMed

Fujiwara, Yasuhiro; Fujioka, Hitoshi; Watanabe, Tomoko; Sekiguchi, Maiko; Murakami, Ryuji

2017-09-01

Confirmation of the magnetic resonance (MR) compatibility of implanted medical devices (IMDs) is mandatory before conducting magnetic resonance imaging (MRI) examinations. In Japan, few such confirmation methods are in use, and they are time-consuming. This study aimed to develop a Web-based searchable MR safety information system to confirm IMD compatibility and to evaluate the usefulness of the system. First, MR safety information for intravascular stents and stent grafts sold in Japan was gathered by interviewing 20 manufacturers. These IMDs were categorized based on the descriptions available on medical package inserts as: "MR Safe," "MR Conditional," "MR Unsafe," "Unknown," and "No Medical Package Insert Available". An MR safety information database for implants was created based on previously proposed item lists. Finally, a Web-based searchable system was developed using this database. A questionnaire was given to health-care personnel in Japan to evaluate the usefulness of this system. Seventy-nine datasets were collected using information provided by 12 manufacturers and by investigating the medical packaging of the IMDs. Although the datasets must be updated by collecting data from other manufacturers, this system facilitates the easy and rapid acquisition of MR safety information for IMDs, thereby improving the safety of MRI examinations.

Women's preferences for vaginal antimicrobial contraceptives. III. Choice of a formulation, applicator, and packaging.

PubMed

Hardy, E; Jiménez, A L; de Pádua, K S; Zaneveld, L J

1998-10-01

Novel vaginal formulations are under development to combat the increasing incidence of sexually transmitted diseases, including AIDS, and also unplanned pregnancies. A study was performed to determine women's preferences for different dosage forms (gel, cream, ovule/suppository, film, foam, tablet), width, length, and color of an applicator, and various types of packages. The study was conducted in Campinas, Brazil. A total of 635 women were interviewed, including both adolescents and adults and low and middle-high socioeconomic groups. The large majority of the women preferred a gel over a cream; both were preferred over the other methods. When asked which method they would not use, the film was most frequently identified, followed by the tablet and ovule. The primary reasons for selecting a particular dosage form were ease of use, absence of odor or the presence of a pleasant one, absence of color, and insertion with an applicator. The major reasons for not using a method were discomfort, "plastic" appearance, distrust of effectiveness, difficulty with insertion, messiness, and rigidity/hardness. The majority of the women liked the applicator shown. The prefilled single dose applicator was by far the preferred packaging. This information should aid in the development of consumer-friendly, vaginal formulations.

Public judgments of information in a diazepam patient package insert.

PubMed

Fisher, S; Mansbridge, B; Lankford, D A

1982-06-01

As part of a larger study of the effects of giving patients written take-home information with prescription medications, a "patient package insert" (PPI) for diazepam was prepared based on content determined by "experts." This report compares the experts' judgments of what information should be included with judgments obtained from the public. Information judged to be most important for inclusion in a PPI was identified by having subjects sort cards containing facts about diazepam. Subjects who had previously used diazepam were no different in their judgments than inexperienced subjects. In general, there was a high degree of concordance between public and expert judgments and also a remarkably strong consensus across very different demographic samples. In those few instances of disagreement, the public attached even greater importance to warnings and "bad news" about diazepam than to information providing reassurances, benign general education, and "good news." To what extent patients would effectively use this information--whether conveyed by PPIs or alternative educational routes--must await empirical evaluation.

Device-packaging method and apparatus for optoelectronic circuits

DOEpatents

Zortman, William A.; Henry, Michael David; Jarecki, Jr., Robert L.

2017-04-25

An optoelectronic device package and a method for its fabrication are provided. The device package includes a lid die and an active die that is sealed or sealable to the lid die and in which one or more optical waveguides are integrally defined. The active die includes one or more active device regions, i.e. integral optoelectronic devices or etched cavities for placement of discrete optoelectronic devices. Optical waveguides terminate at active device regions so that they can be coupled to them. Slots are defined in peripheral parts of the active dies. At least some of the slots are aligned with the ends of integral optical waveguides so that optical fibers or optoelectronic devices inserted in the slots can optically couple to the waveguides.

Fuzzy based attitude controller for flexible spacecraft with on/off thrusters. M.S. Thesis - M.I.T., 1993

NASA Technical Reports Server (NTRS)

Knapp, Roger Glenn

1993-01-01

A fuzzy-based attitude controller is designed for attitude control of a generic spacecraft with on/off thrusters. The controller is comprised of packages of rules dedicated to addressing different objectives (e.g., disturbance rejection, low fuel consumption, avoiding the excitation of flexible appendages, etc.). These rule packages can be inserted or removed depending on the requirements of the particular spacecraft and are parameterized based on vehicle parameters such as inertia or operational parameters such as the maneuvering rate. Individual rule packages can be 'weighted' relative to each other to emphasize the importance of one objective relative to another. Finally, the fuzzy controller and rule packages are demonstrated using the high-fidelity Space Shuttle Interactive On-Orbit Simulator (IOS) while performing typical on-orbit operations and are subsequently compared with the existing shuttle flight control system performance.

Novel glucokinase mutations in patients with monogenic diabetes - clinical outline of GCK-MD and potential for founder effect in Slavic population.

PubMed

Borowiec, M; Antosik, K; Fendler, W; Deja, G; Jarosz-Chobot, P; Mysliwiec, M; Zmyslowska, A; Malecki, M; Szadkowska, A; Mlynarski, W

2012-03-01

Glucokinase (GCK) gene mutations are the causative factor of GCK-MD (monogenic diabetes) characterized by a mild clinical phenotype and potential for insulin withdrawal. This study presents the results of a nationwide genetic screening for GCK-MD performed in Poland. A group of 194 patients with clinical suspicion of GCK-MD and 17 patients with neonatal diabetes were subjected to GCK sequencing. Patients negative for GCK mutations were subjected to multiplex ligation-dependent probe amplification (MLPA) to detect deletions or insertions. A total of 44 GCK heterozygous mutations were found in 68 probands (35%). Among those, 20 mutations were novel ones: A282fs, D198V, E158X, G246V, G249R, I348N, L165V, L315Q, M115I, N254S, P284fs, Q338P, R377L, R43C, R46S, S212fs, S212P, T255N, V406A and Y214D. No abnormalities were detected in MLPA analysis. Homozygous D278E mutation was found in one patient with neonatal diabetes. The most frequently observed combinations of symptoms typical for GCK-MD were mild diabetes and/or fasting hyperglycaemia (98.3%), positive C-peptide at diagnosis (76%) and dominant mode of inheritance (59%). This study outlines numerous novel mutations of the GCK gene present in white Caucasians of Slavic origin. Thorough clinical assessment of known factors associated with GCK-MD may facilitate patient selection. © 2011 John Wiley & Sons A/S.

Intracellular Distribution of Capsid-Associated pUL77 of Human Cytomegalovirus and Interactions with Packaging Proteins and pUL93.

PubMed

Köppen-Rung, Pánja; Dittmer, Alexandra; Bogner, Elke

2016-07-01

DNA packaging into procapsids is a common multistep process during viral maturation in herpesviruses. In human cytomegalovirus (HCMV), the proteins involved in this process are terminase subunits pUL56 and pUL89, which are responsible for site-specific cleavage and insertion of the DNA into the procapsid via portal protein pUL104. However, additional viral proteins are required for the DNA packaging process. We have shown previously that the plasmid that encodes capsid-associated pUL77 encodes another potential player during capsid maturation. Pulse-chase experiments revealed that pUL77 is stably expressed during HCMV infection. Time course analysis demonstrated that pUL77 is expressed in the early late part of the infectious cycle. The sequence of pUL77 was analyzed to find nuclear localization sequences (NLSs), revealing monopartite NLSm at the N terminus and bipartite NLSb in the middle of pUL77. The potential NLSs were inserted into plasmid pHM829, which encodes a chimeric protein with β-galactosidase and green fluorescent protein. In contrast to pUL56, neither NLSm nor NLSb was sufficient for nuclear import. Furthermore, we investigated by coimmunoprecipitation whether packaging proteins, as well as pUL93, the homologue protein of herpes simplex virus 1 pUL17, are interaction partners of pUL77. The interactions between pUL77 and packaging proteins, as well as pUL93, were verified. We showed that the capsid-associated pUL77 is another potential player during capsid maturation of HCMV. Protein UL77 (pUL77) is a conserved core protein of HCMV. This study demonstrates for the first time that pUL77 has early-late expression kinetics during the infectious cycle and an intrinsic potential for nuclear translocation. According to its proposed functions in stabilization of the capsid and anchoring of the encapsidated DNA during packaging, interaction with further DNA packaging proteins is required. We identified physical interactions with terminase subunits pUL56 and pUL89 and another postulated packaging protein, pUL93, in infected, as well as transfected, cells. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

22 CFR 125.6 - Certification requirements for exemptions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... LICENSES FOR THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.6 Certification requirements for exemptions. (a) To claim an exemption for the export of technical data under the provisions of.... Certifications consist of clearly marking the package or letter containing the technical data “22 CFR [insert...

22 CFR 125.6 - Certification requirements for exemptions.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... Certifications consist of clearly marking the package or letter containing the technical data “22 CFR [insert... LICENSES FOR THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.6 Certification requirements for exemptions. (a) To claim an exemption for the export of technical data under the provisions of...

22 CFR 125.6 - Certification requirements for exemptions.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... Certifications consist of clearly marking the package or letter containing the technical data “22 CFR [insert... LICENSES FOR THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.6 Certification requirements for exemptions. (a) To claim an exemption for the export of technical data under the provisions of...

22 CFR 125.6 - Certification requirements for exemptions.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... Certifications consist of clearly marking the package or letter containing the technical data “22 CFR [insert... LICENSES FOR THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.6 Certification requirements for exemptions. (a) To claim an exemption for the export of technical data under the provisions of...

22 CFR 125.6 - Certification requirements for exemptions.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... Certifications consist of clearly marking the package or letter containing the technical data “22 CFR [insert... LICENSES FOR THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.6 Certification requirements for exemptions. (a) To claim an exemption for the export of technical data under the provisions of...

Dissolution-and-reduction CVD synthesis of few-layer graphene on ultra-thin nickel film lifted off for mode-locking fiber lasers

PubMed Central

Peng, Kaung-Jay; Lin, Yung-Hsiang; Wu, Chung-Lun; Lin, Sheng-Fong; Yang, Chun-Yu; Lin, Shih-Meng; Tsai, Din-Ping; Lin, Gong-Ru

2015-01-01

The in-situ dissolution-and-reduction CVD synthesized few-layer graphene on ultra-thin nickel catalyst film is demonstrated at temperature as low as 550 °C, which can be employed to form transmission-type or reflection-type saturable absorber (SA) for mode-locking the erbium-doped fiber lasers (EDFLs). With transmission-type graphene SA, the EDFL shortens its pulsewidth from 483 to 441 fs and broadens its spectral linewidth from 4.2 to 6.1 nm with enlarging the pumping current from 200 to 900 mA. In contrast, the reflection-type SA only compresses the pulsewidth from 875 to 796 fs with corresponding spectral linewidth broadened from 2.2 to 3.3 nm. The reflection-type graphene mode-locker increases twice of its equivalent layer number to cause more insertion loss than the transmission-type one. Nevertheless, the reflection-type based saturable absorber system can generate stabilized soliton-like pulse easier than that of transmission-type system, because the nonlinearity induced self-amplitude modulation depth is simultaneously enlarged when passing through the graphene twice under the retro-reflector design. PMID:26328535

An Assessment of the Influence of the Industry Distribution Chain on the Oxygen Levels in Commercial Modified Atmosphere Packaged Cheddar Cheese Using Non-Destructive Oxygen Sensor Technology.

PubMed

O' Callaghan, Karen A M; Papkovsky, Dmitri B; Kerry, Joseph P

2016-06-20

The establishment and control of oxygen levels in packs of oxygen-sensitive food products such as cheese is imperative in order to maintain product quality over a determined shelf life. Oxygen sensors quantify oxygen concentrations within packaging using a reversible optical measurement process, and this non-destructive nature ensures the entire supply chain can be monitored and can assist in pinpointing negative issues pertaining to product packaging. This study was carried out in a commercial cheese packaging plant and involved the insertion of 768 sensors into 384 flow-wrapped cheese packs (two sensors per pack) that were flushed with 100% carbon dioxide prior to sealing. The cheese blocks were randomly assigned to two different storage groups to assess the effects of package quality, packaging process efficiency, and handling and distribution on package containment. Results demonstrated that oxygen levels increased in both experimental groups examined over the 30-day assessment period. The group subjected to a simulated industrial distribution route and handling procedures of commercial retailed cheese exhibited the highest level of oxygen detected on every day examined and experienced the highest rate of package failure. The study concluded that fluctuating storage conditions, product movement associated with distribution activities, and the possible presence of cheese-derived contaminants such as calcium lactate crystals were chief contributors to package failure.

An Assessment of the Influence of the Industry Distribution Chain on the Oxygen Levels in Commercial Modified Atmosphere Packaged Cheddar Cheese Using Non-Destructive Oxygen Sensor Technology

PubMed Central

O’ Callaghan, Karen A.M.; Papkovsky, Dmitri B.; Kerry, Joseph P.

2016-01-01

The establishment and control of oxygen levels in packs of oxygen-sensitive food products such as cheese is imperative in order to maintain product quality over a determined shelf life. Oxygen sensors quantify oxygen concentrations within packaging using a reversible optical measurement process, and this non-destructive nature ensures the entire supply chain can be monitored and can assist in pinpointing negative issues pertaining to product packaging. This study was carried out in a commercial cheese packaging plant and involved the insertion of 768 sensors into 384 flow-wrapped cheese packs (two sensors per pack) that were flushed with 100% carbon dioxide prior to sealing. The cheese blocks were randomly assigned to two different storage groups to assess the effects of package quality, packaging process efficiency, and handling and distribution on package containment. Results demonstrated that oxygen levels increased in both experimental groups examined over the 30-day assessment period. The group subjected to a simulated industrial distribution route and handling procedures of commercial retailed cheese exhibited the highest level of oxygen detected on every day examined and experienced the highest rate of package failure. The study concluded that fluctuating storage conditions, product movement associated with distribution activities, and the possible presence of cheese-derived contaminants such as calcium lactate crystals were chief contributors to package failure. PMID:27331815

High-Tc superconductor coplanar waveguide filter

NASA Technical Reports Server (NTRS)

Chew, Wilbert; Bajuk, Louis J.; Cooley, Thomas W.; Foote, Marc C.; Hunt, Brian D.; Rascoe, Daniel L.; Riley, A. L.

1991-01-01

Coplanar waveguide (CPW) low-pass filters made of YBa2Cu3O(7-delta) (YBCO) on LaAlO3 substrates, with dimensions suited for integrated circuits, were fabricated and packaged. A complete filter gives a true idea of the advantages and difficulties in replacing thin-film metal with a high-temperature superconductor in a practical circuit. Measured insertion losses in liquid nitrogen were superior to the loss of a similar thin-film copper filter throughout the 0- to 9.5-GHz passband. These results demonstrate the performance of fully patterned YBCO in a practical CPW structure after sealing in a hermetic package.

Apparatus and Method for Packaging and Integrating Microphotonic Devices

NASA Technical Reports Server (NTRS)

Nguyen, Hung (Inventor)

2008-01-01

An apparatus is disclosed that includes a carrier structure and an optical coupling arrangement. The carrier structure is made of a silicon material and allows for the packaging and integrating of microphotonic devices onto a single chip. The optical coupling mechanism enables laser light to be coupled into and out of a microphotonic resonant disk integrated on the carrier. The carrier provides first, second and third cavities that are dimensioned so as to accommodate the insertion and snug fitting of the microphotonic resonant disk and first and second prisms that are implemented by the optical coupling arrangement to accommodate the laser coupling.

Agony of the ecstasy: report of five cases of MDMA smuggling.

PubMed

Low, V H S; Dillon, E K

2005-10-01

The international smuggling of illicit drugs by the ingestion or rectal insertion of drug-filled packages is recognized in the trafficking of heroin and cocaine. Customs authorities, with suspicion of such activities, presented five subjects. The legally allowed radiological examination comprising one supine abdominal radiograph was performed. Radiographic findings demonstrated the presence of multiple enteric oval, capsule-shaped packages of soft tissue density. This was confirmed following supervised evacuation of bowel contents induced by the administration of laxatives. Analysis of the concealed material identified ecstasy (methylenedioxymethamphetamine (MDMA)), a substance not previously reported as transported by this route.

21 CFR 357.152 - Package inserts for anthelmintic drug products.

Code of Federal Regulations, 2013 CFR

2013-04-01

... discussion of the symptoms suggestive of pinworm infestation, including a statement that pinworms must be... the pinworm. (c) A commentary on the life cycle of the pinworm. (d) A commentary on the ways in which pinworms may be spread from person to person and hygienic procedures to follow to avoid such spreading. (e...

21 CFR 357.152 - Package inserts for anthelmintic drug products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... discussion of the symptoms suggestive of pinworm infestation, including a statement that pinworms must be... the pinworm. (c) A commentary on the life cycle of the pinworm. (d) A commentary on the ways in which pinworms may be spread from person to person and hygienic procedures to follow to avoid such spreading. (e...

21 CFR 357.152 - Package inserts for anthelmintic drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... discussion of the symptoms suggestive of pinworm infestation, including a statement that pinworms must be... the pinworm. (c) A commentary on the life cycle of the pinworm. (d) A commentary on the ways in which pinworms may be spread from person to person and hygienic procedures to follow to avoid such spreading. (e...

21 CFR 357.152 - Package inserts for anthelmintic drug products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... discussion of the symptoms suggestive of pinworm infestation, including a statement that pinworms must be... the pinworm. (c) A commentary on the life cycle of the pinworm. (d) A commentary on the ways in which pinworms may be spread from person to person and hygienic procedures to follow to avoid such spreading. (e...

21 CFR 357.152 - Package inserts for anthelmintic drug products.

Code of Federal Regulations, 2014 CFR

2014-04-01

... discussion of the symptoms suggestive of pinworm infestation, including a statement that pinworms must be... the pinworm. (c) A commentary on the life cycle of the pinworm. (d) A commentary on the ways in which pinworms may be spread from person to person and hygienic procedures to follow to avoid such spreading. (e...

Isolating USB connections in medical equipment.

PubMed

Broeders, Jan-Hein

2009-01-01

Although offering several benefits, the universal serial bus (USB) port has not been rapidly adopted for connecting medical equipment. This is because it could affect safety procedures, with equipment not operating isolated from the mains. To overcome this, a single package isolation device has been developed that can be inserted directly into the USB signal path.

Standard Hardware Acquisition and Reliability Program's (SHARP's) efforts in incorporating fiber optic interconnects into standard electronic module (SEM) connectors

NASA Astrophysics Data System (ADS)

Riggs, William R.

1994-05-01

SHARP is a Navy wide logistics technology development effort aimed at reducing the acquisition costs, support costs, and risks of military electronic weapon systems while increasing the performance capability, reliability, maintainability, and readiness of these systems. Lower life cycle costs for electronic hardware are achieved through technology transition, standardization, and reliability enhancement to improve system affordability and availability as well as enhancing fleet modernization. Advanced technology is transferred into the fleet through hardware specifications for weapon system building blocks of standard electronic modules, standard power systems, and standard electronic systems. The product lines are all defined with respect to their size, weight, I/O, environmental performance, and operational performance. This method of defining the standard is very conducive to inserting new technologies into systems using the standard hardware. This is the approach taken thus far in inserting photonic technologies into SHARP hardware. All of the efforts have been related to module packaging; i.e. interconnects, component packaging, and module developments. Fiber optic interconnects are discussed in this paper.

[Safety profile of heterologous serum produced by the Butantan Institute, in São Paulo-SP, Brazil, from 2012 to 2015].

PubMed

Gattás, Vera Lúcia; Braga, Patrícia Emília; Koike, Marcelo Eiji; Lucchesi, Maria Beatriz; Precioso, Alexander Roberto

2017-01-01

to describe the safety profile of the heterologous serum produced by the Butantan Institute (BI) of São Paulo-SP, Brazil. a descriptive study of adverse events (AEs) post-exposure to serum produced by the BI, encoded in the medical terminology of the Medical Dictionary for Regulatory Activities (MedDRA), and spontaneously reported to BI from 2012 to 2015. 52 individuals reported AEs, mainly related to Bothrops antivenom (n=11), diphtheria antitoxin (n=9) and unspecified snakebite serum (n=9); a mean of 3.2 AEs per individual was observed; among the total of 173 AEs, 63.0% were expected considering that they were described in the package insert; most of them were classified as skin and subcutaneous tissue disorders (30.6%); there were six deaths temporally related to the use of serum, but this association was discarded. in the studied period, the serum produced by the BI had no changes in their safety profiles, considering that the AEs were expected, according to the information previously described in the package insert.

A practical topological insulator saturable absorber for mode-locked fiber laser

PubMed Central

Yan, Peiguang; Lin, Rongyong; Ruan, Shuangchen; Liu, Aijiang; Chen, Hao; Zheng, Yuequn; Chen, Sifan; Guo, Chunyu; Hu, Juguang

2015-01-01

A novel saturable absorber (SA) was fabricated by coating the topological insulator (TI) film on microfiber using pulsed laser deposition (PLD) method. The TISA device had an insertion loss of ~1.25 dB, a saturable intensity of 26.7 MW/cm2, a modulation depth of ~5.7%, and a nonsaturable loss of 20.5%. Upon employing this SA device, we established a passively mode-locked EDFL and achieved nearly free-chirped soliton pulse with 286 fs of pulse duration and >73 dB of signal to noise ratio (SNR). This result clearly evidences that the PLD is an effective scheme for practical SA device fabrication. PMID:25732598

Mode-locked solid state lasers using diode laser excitation

DOEpatents

Holtom, Gary R [Boston, MA

2012-03-06

A mode-locked laser employs a coupled-polarization scheme for efficient longitudinal pumping by reshaped laser diode bars. One or more dielectric polarizers are configured to reflect a pumping wavelength having a first polarization and to reflect a lasing wavelength having a second polarization. An asymmetric cavity provides relatively large beam spot sizes in gain medium to permit efficient coupling to a volume pumped by a laser diode bar. The cavity can include a collimation region with a controlled beam spot size for insertion of a saturable absorber and dispersion components. Beam spot size is selected to provide stable mode locking based on Kerr lensing. Pulse durations of less than 100 fs can be achieved in Yb:KGW.

Generation of Ultrashort Pulses from Chromium - Forsterite Laser

NASA Astrophysics Data System (ADS)

Seas, Antonios

This thesis discusses the generation of ultrashort pulses from the chromium-doped forsterite laser, the various designs, construction and operation of forsterite laser systems capable of generating picosecond and femtosecond pulses in the near infrared. Various mode-locking techniques including synchronous optical pumping, active mode-locking, and self-mode-locking were successfully engineered and implemented. Active and synchronously pumped mode-locking using a three mirror, astigmatically compensated cavity design and a forsterite crystal with a figure of merit of 26 (FOM = alpha_{rm 1064nm} /alpha_{rm 1250nm }) generated pulses with FWHM of 49 and 260 ps, respectively. The tuning range of the mode-locked forsterite laser in both cases was determined to be in the order of 100 nm limited only by the dielectric coatings of the mirrors used in the cavity. The slope efficiency was measured to be 12.5% for synchronous pumping and 9.1% for active mode-locking. A four mirror astigmatically compensated cavity was found to be more appropriate for mode-locking. Active mode-locking using the four-mirror cavity generated pulses with FWHM of 31 ps. The pulsewidth was further reduced to 6 ps by using a forsterite crystal with a higher figure of merit (FOM = 39). Pulsewidth-bandwidth measurements indicated the presence of chirp in the output pulses. Numerical calculation of the phase characteristics of various optical materials indicated that a pair of prisms made of SF 14 optical glass can be used in the cavity in order to compensate for the chirp. The insertion of the prisms in the cavity resulted in a reduction of the pulsewidth from 6 ps down to 900 fs. Careful optimization of the laser cavity resulted in the generation of stable 90-fs pulses. Pulses as short as 60 fs were generated and self-mode-locked mode of operation using the Cr:forsterite laser was demonstrated for the first time. Pure self-mode-locking was next achieved generating 105-fs pulses tunable between 1230-1270 nm. Numerical calculations of the cubic phase characteristics of the prism pair used indicated that the pair of SF 14 prisms compensated for quadratic phase but introduced a large cubic phase term. Numerical evaluation of other optical glasses indicated that a pair of SFN 64 prisms can introduce the same quadratic phase as SF 14 prisms but introduce a smaller cubic phase. When the SF 14 prisms were replaced by SFN 64 prisms the pulsewidth was reduced to 50 fs. Great improvement was also observed in the stability of the self-mode-locked forsterite laser and in the ease of achieving mode-locking. Using the same experimental arrangement and a forsterite crystal with improved FOM the pulse width was reduced to 36 fs.

Reduction of timing jitter and intensity noise in normal-dispersion passively mode-locked fiber lasers by narrow band-pass filtering.

PubMed

Qin, Peng; Song, Youjian; Kim, Hyoji; Shin, Junho; Kwon, Dohyeon; Hu, Minglie; Wang, Chingyue; Kim, Jungwon

2014-11-17

Fiber lasers mode-locked with normal cavity dispersion have recently attracted great attention due to large output pulse energy and femtosecond pulse duration. Here we accurately characterized the timing jitter of normal-dispersion fiber lasers using a balanced cross-correlation method. The timing jitter characterization experiments show that the timing jitter of normal-dispersion mode-locked fiber lasers can be significantly reduced by using narrow band-pass filtering (e.g., 7-nm bandwidth filtering in this work). We further identify that the timing jitter of the fiber laser is confined in a limited range, which is almost independent of cavity dispersion map due to the amplifier-similariton formation by insertion of the narrow bandpass filter. The lowest observed timing jitter reaches 0.57 fs (rms) integrated from 10 kHz to 10 MHz Fourier frequency. The rms relative intensity noise (RIN) is also reduced from 0.37% to 0.02% (integrated from 1 kHz to 5 MHz Fourier frequency) by the insertion of narrow band-pass filter.

Blood leak alarm interference by hydoxocobalamin is hemodialysis machine dependent.

PubMed

Sutter, M E; Clarke, M E; Cobb, J; Daubert, G P; Rathore, V S; Aston, L S; Poppenga, R H; Ford, J B; Owen, K P; Albertson, T E

2012-12-01

Hydroxocobalamin has been reported to interfere with the blood leak alarm on hemodialysis machines making it difficult to use this treatment modality after hydroxocobalamin infusion. The objective was to determine if this interference with hydroxocobalamin occurs across hemodialysis machines by different manufacturers. Additionally, we aimed to see if this represented a colorimetric interference alone or if it is the optical properties of hydroxocobalamin. Hydroxocobalamin was reconstituted per package insert. Food coloring was added to 0.9% saline to create the colors of the visual spectrum. Optical properties of absorbance and transmittance were measured. Hydroxocobalamin and the saline solutions were infused into the Fresenius 2008K™ and the Gambro Phoenix X36™ machines. Times were recorded from the start of the machine until the solution finished or the alarm triggered. When evaluating the Gambro Phoenix X36™ machine and dialysis circuit; the alarm did not trigger. In contrast, the blood leak alarm on the Fresenius 2008K™ machine was tripped by both the red solution and hydoxocobalamin infused per the package insert. The alarm stopped the machine between 128 and 132 seconds for the red solution and between 30 and 35 seconds with the hydroxocobalamin. Membranes of the circuits where the alarm tripped were examined and remained intact without blood. Results were validated on different machines with new circuits. Hydroxocobalamin infusion per package insert and the red saline solution prepared with Red Dye 40 both triggered the blood leak alarm and stopped the Fresenius 2008K™ machine. However, this was not true for the Gambro Phoenix X36™ machine as the alarm never triggered. The interference with the Fresenius 2008K™ appears colorimetric due to normal saline with Red Dye 40 triggering the alarm. We alert physicians to become familiar with the properties of individual dialysis machines prior to use of hydroxocobalamin. When facing difficulties with hemodialysis after the administration of hydroxocobalamin, consider attempting with a different manufactures machine or model if available or contact the manufacturer directly.

Virus-Like Particles Derived from HIV-1 for Delivery of Nuclear Proteins: Improvement of Production and Activity by Protein Engineering.

PubMed

Robert, Marc-André; Lytvyn, Viktoria; Deforet, Francis; Gilbert, Rénald; Gaillet, Bruno

2017-01-01

Virus-like particles (VLPs) derived from retroviruses and lentiviruses can be used to deliver recombinant proteins without the fear of causing insertional mutagenesis to the host cell genome. In this study we evaluate the potential of an inducible lentiviral vector packaging cell line for VLP production. The Gag gene from HIV-1 was fused to a gene encoding a selected protein and it was transfected into the packaging cells. Three proteins served as model: the green fluorescent protein and two transcription factors-the cumate transactivator (cTA) of the inducible CR5 promoter and the human Krüppel-like factor 4 (KLF4). The sizes of the VLPs were 120-150 nm in diameter and they were resistant to freeze/thaw cycles. Protein delivery by the VLPs reached up to 100% efficacy in human cells and was well tolerated. Gag-cTA triggered up to 1100-fold gene activation of the reporter gene in comparison to the negative control. Protein engineering was required to detect Gag-KLF4 activity. Thus, insertion of the VP16 transactivation domain increased the activity of the VLPs by eightfold. An additional 2.4-fold enhancement was obtained by inserting nuclear export signal. In conclusion, our platform produced VLPs capable of efficient protein transfer, and it was shown that protein engineering can be used to improve the activity of the delivered proteins as well as VLP production.

Prospective clinical evaluation of the Polyperf® Safe, a safety Huber needle, in cancer patients.

PubMed

Goossens, Godelieve A; Moons, Philip; Jérôme, Martine; Stas, Marguerite

2011-01-01

Evaluation of the Polyperf® Safe (PPS) needle on safety and user-friendliness, as experienced by first-time and non-first-time users of the device. A prospective, descriptive study was carried out at the University Hospitals Leuven, Belgium. Five hundred PPS needles were individually evaluated in cancer patients. Different aspects of the PPS were assessed: packaging, needle insertion, and needle removal. Nurses were asked whether they had previously inserted or removed this type of needle. We compared the PPS needle with the standard Gripper® needle in terms of safety, ease of use, and ease of training. Three hundred sixty-six evaluation forms were available for analysis (73.2%). Packaging and access evaluations were scored positively, except for two aspects: (1) needle stability, and (2) ease of dressing. Ease of removal was scored unsatisfactory in up to 22.4% of the registrations. Pain at insertion was reported in about 20% registrations, and blood contact was reported by 2.5% of non-first-time users. Safety was scored as good, although ease of use and ease in training scored 25.4% and 43.8%, respectively, lower than the Gripper®. In general, nurses evaluated the PPS positively, with the exception of needle stability, ease of dressing, and ease of removal. No needlestick accidents were recorded. Aspects of ease of use and ease of training for PPS needles scored less than those for the Gripper® needles in up to one-third of the registrations.

78 FR 63226 - GlaxoSmithKline LLC; Withdrawal of Approval of the Indication for Treatment of Patients With...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... have not received prior rituximab, for BEXXAR (tositumomab and iodine I 131 tositumomab) Injection held... withdraw the rituximab-na[iuml]ve indication for BEXXAR (tositumomab and iodine I 131 tositumomab... indication for BEXXAR (tositumomab and iodine I 131 tositumomab) Injection from the package insert. In the...

21 CFR 201.323 - Aluminum in large and small volume parenterals used in total parenteral nutrition.

Code of Federal Regulations, 2011 CFR

2011-04-01

... used in total parenteral nutrition. 201.323 Section 201.323 Food and Drugs FOOD AND DRUG ADMINISTRATION... parenteral nutrition. (a) The aluminum content of large volume parenteral (LVP) drug products used in total parenteral nutrition (TPN) therapy must not exceed 25 micrograms per liter (µg/L). (b) The package insert of...

21 CFR 201.323 - Aluminum in large and small volume parenterals used in total parenteral nutrition.

Code of Federal Regulations, 2012 CFR

2012-04-01

... used in total parenteral nutrition. 201.323 Section 201.323 Food and Drugs FOOD AND DRUG ADMINISTRATION... parenteral nutrition. (a) The aluminum content of large volume parenteral (LVP) drug products used in total parenteral nutrition (TPN) therapy must not exceed 25 micrograms per liter (µg/L). (b) The package insert of...

21 CFR 201.323 - Aluminum in large and small volume parenterals used in total parenteral nutrition.

Code of Federal Regulations, 2013 CFR

2013-04-01

... used in total parenteral nutrition. 201.323 Section 201.323 Food and Drugs FOOD AND DRUG ADMINISTRATION... parenteral nutrition. (a) The aluminum content of large volume parenteral (LVP) drug products used in total parenteral nutrition (TPN) therapy must not exceed 25 micrograms per liter (µg/L). (b) The package insert of...

21 CFR 201.323 - Aluminum in large and small volume parenterals used in total parenteral nutrition.

Code of Federal Regulations, 2010 CFR

2010-04-01

... used in total parenteral nutrition. 201.323 Section 201.323 Food and Drugs FOOD AND DRUG ADMINISTRATION... parenteral nutrition. (a) The aluminum content of large volume parenteral (LVP) drug products used in total parenteral nutrition (TPN) therapy must not exceed 25 micrograms per liter (µg/L). (b) The package insert of...

21 CFR 201.323 - Aluminum in large and small volume parenterals used in total parenteral nutrition.

Code of Federal Regulations, 2014 CFR

2014-04-01

... used in total parenteral nutrition. 201.323 Section 201.323 Food and Drugs FOOD AND DRUG ADMINISTRATION... parenteral nutrition. (a) The aluminum content of large volume parenteral (LVP) drug products used in total parenteral nutrition (TPN) therapy must not exceed 25 micrograms per liter (µg/L). (b) The package insert of...

GSFC Cutting Edge Avionics Technologies for Spacecraft

NASA Technical Reports Server (NTRS)

Luers, Philip J.; Culver, Harry L.; Plante, Jeannette

1998-01-01

With the launch of NASA's first fiber optic bus on SAMPEX in 1992, GSFC has ushered in an era of new technology development and insertion into flight programs. Predating such programs the Lewis and Clark missions and the New Millenium Program, GSFC has spearheaded the drive to use cutting edge technologies on spacecraft for three reasons: to enable next generation Space and Earth Science, to shorten spacecraft development schedules, and to reduce the cost of NASA missions. The technologies developed have addressed three focus areas: standard interface components, high performance processing, and high-density packaging techniques enabling lower cost systems. To realize the benefits of standard interface components GSFC has developed and utilized radiation hardened/tolerant devices such as PCI target ASICs, Parallel Fiber Optic Data Bus terminals, MIL-STD-1773 and AS1773 transceivers, and Essential Services Node. High performance processing has been the focus of the Mongoose I and Mongoose V rad-hard 32-bit processor programs as well as the SMEX-Lite Computation Hub. High-density packaging techniques have resulted in 3-D stack DRAM packages and Chip-On-Board processes. Lower cost systems have been demonstrated by judiciously using all of our technology developments to enable "plug and play" scalable architectures. The paper will present a survey of development and insertion experiences for the above technologies, as well as future plans to enable more "better, faster, cheaper" spacecraft. Details of ongoing GSFC programs such as Ultra-Low Power electronics, Rad-Hard FPGAs, PCI master ASICs, and Next Generation Mongoose processors.

A physics-based probabilistic forecasting model for rainfall-induced shallow landslides at regional scale

NASA Astrophysics Data System (ADS)

Zhang, Shaojie; Zhao, Luqiang; Delgado-Tellez, Ricardo; Bao, Hongjun

2018-03-01

Conventional outputs of physics-based landslide forecasting models are presented as deterministic warnings by calculating the safety factor (Fs) of potentially dangerous slopes. However, these models are highly dependent on variables such as cohesion force and internal friction angle which are affected by a high degree of uncertainty especially at a regional scale, resulting in unacceptable uncertainties of Fs. Under such circumstances, the outputs of physical models are more suitable if presented in the form of landslide probability values. In order to develop such models, a method to link the uncertainty of soil parameter values with landslide probability is devised. This paper proposes the use of Monte Carlo methods to quantitatively express uncertainty by assigning random values to physical variables inside a defined interval. The inequality Fs < 1 is tested for each pixel in n simulations which are integrated in a unique parameter. This parameter links the landslide probability to the uncertainties of soil mechanical parameters and is used to create a physics-based probabilistic forecasting model for rainfall-induced shallow landslides. The prediction ability of this model was tested in a case study, in which simulated forecasting of landslide disasters associated with heavy rainfalls on 9 July 2013 in the Wenchuan earthquake region of Sichuan province, China, was performed. The proposed model successfully forecasted landslides in 159 of the 176 disaster points registered by the geo-environmental monitoring station of Sichuan province. Such testing results indicate that the new model can be operated in a highly efficient way and show more reliable results, attributable to its high prediction accuracy. Accordingly, the new model can be potentially packaged into a forecasting system for shallow landslides providing technological support for the mitigation of these disasters at regional scale.

Synthesis, characterization, and nonlinear optical (NLO) properties of truxene-cored diphenylamine derivatives

NASA Astrophysics Data System (ADS)

Li, Fusheng; Zhao, Baodong; Chen, Yu; Zhang, Yufei; Wang, Tao; Xue, Song

2017-10-01

Three star-shaped compounds based on a truxene core (FS11, FS12 and FS13) were prepared. The truxene core is incorporating with asymmetric diphenylamines, including one phenyl of diphenylamine substituted by methoxy group and the other phenyl substituted by tolyl, fluorophenyl and phenylethynyl for FS11, FS12 and FS13, respectively. Their one-photon, two-photon absorption, geometric structures, electrochemical behavior and thermal properties were investigated. The absorption maxima of charge transfer band for FS11, FS12 and FS13 are 375 nm, 373 nm and 383 nm, and the corresponding molar extinction coefficients of FS11, FS12 and FS13 is 79,950 M- 1 cm- 1, 67,220 M- 1 cm- 1 and 108,780 M- 1 cm- 1. The ;pull-push; structure promotes charge transfer between asymmetric diphenylamine branches and the truxene core. Their two-photon absorbtion property is measured by two-photon induced fluorescence. The maximum two-photon cross-sections values of FS11, FS12 and FS13 are excited at 750 nm, which are 260 GM, 204GM and 367 GM, respectively.

MEMS Direct Chip Attach Packaging Methodologies and Apparatuses for Harsh Environments

NASA Technical Reports Server (NTRS)

Okojie, Robert S. (Inventor)

2009-01-01

Methods of bulk manufacturing high temperature sensor subassembly packages are disclosed and claimed. Sensors are sandwiched between a top cover and a bottom cover so as to enable the peripheries of the top covers, sensors and bottom covers to be sealed and bound securely together are disclosed and claimed. Sensors are placed on the bottom covers leaving the periphery of the bottom cover exposed. Likewise, top covers are placed on the sensors leaving the periphery of the sensor exposed. Individual sensor sub-assemblies are inserted into final packaging elements which are also disclosed and claimed. Methods of directly attaching wires or pins to contact pads on the sensors are disclosed and claimed. Sensors, such as pressure sensors and accelerometers, and headers made out of silicon carbide and aluminum nitride are disclosed and claimed. Reference cavities are formed in some embodiments disclosed and claimed herein where top covers are not employed.

MEMS Direct Chip Attach Packaging Methodologies and Apparatuses for Harsh Environments

NASA Technical Reports Server (NTRS)

Okojie, Robert S. (Inventor)

2005-01-01

Methods of bulk manufacturing high temperature sensor sub-assembly packages are disclosed and claimed. Sensors are sandwiched between a top cover and a bottom cover so as to enable the peripheries of the top covers, sensors and bottom covers to be sealed and bound securely together are disclosed and claimed. Sensors are placed on the bottom covers leaving the periphery of the bottom cover exposed. Likewise, top covers are placed on the sensors leaving the periphery of the sensor exposed. Individual sensor sub- assemblies are inserted into final packaging elements which are also disclosed and claimed. Methods of directly attach- ing wires or pins to contact pads on the sensors are disclosed and claimed. Sensors, such as pressure sensors and accelerometers, and headers made out of silicon carbide and aluminum nitride are disclosed and claimed. Reference cavities are formed in some embodiments disclosed and claimed herein where top covers are not employed.

High-energy metal air batteries

DOEpatents

Zhang, Ji-Guang; Xiao, Jie; Xu, Wu; Wang, Deyu; Williford, Ralph E.; Liu, Jun

2014-07-01

Disclosed herein are embodiments of lithium/air batteries and methods of making and using the same. Certain embodiments are pouch-cell batteries encased within an oxygen-permeable membrane packaging material that is less than 2% of the total battery weight. Some embodiments include a hybrid air electrode comprising carbon and an ion insertion material, wherein the mass ratio of ion insertion material to carbon is 0.2 to 0.8. The air electrode may include hydrophobic, porous fibers. In particular embodiments, the air electrode is soaked with an electrolyte comprising one or more solvents including dimethyl ether, and the dimethyl ether subsequently is evacuated from the soaked electrode. In other embodiments, the electrolyte comprises 10-20% crown ether by weight.

High-energy metal air batteries

DOEpatents

Zhang, Ji-Guang; Xiao, Jie; Xu, Wu; Wang, Deyu; Williford, Ralph E.; Liu, Jun

2013-07-09

Disclosed herein are embodiments of lithium/air batteries and methods of making and using the same. Certain embodiments are pouch-cell batteries encased within an oxygen-permeable membrane packaging material that is less than 2% of the total battery weight. Some embodiments include a hybrid air electrode comprising carbon and an ion insertion material, wherein the mass ratio of ion insertion material to carbon is 0.2 to 0.8. The air electrode may include hydrophobic, porous fibers. In particular embodiments, the air electrode is soaked with an electrolyte comprising one or more solvents including dimethyl ether, and the dimethyl ether subsequently is evacuated from the soaked electrode. In other embodiments, the electrolyte comprises 10-20% crown ether by weight.

Mode-locked fiber laser using SU8 resist incorporating carbon nanotubes

NASA Astrophysics Data System (ADS)

Hernandez-Romano, Ivan; Mandridis, Dimitrios; May-Arrioja, Daniel A.; Sanchez-Mondragon, Jose J.; Delfyett, Peter J.

2011-06-01

We report the fabrication of a saturable absorber made of a novel polymer SU8 doped with Single Wall Carbon Nanotubes (SWCNTs). A passive mode-locked ring cavity fiber laser was built with a 100 μm thick SU8/SWCNT film inserted between two FC/APC connectors. Self-starting passively mode-locked lasing operation was observed at 1572.04 nm, with a FWHM of 3.26 nm. The autocorrelation trace was 1.536 ps corresponding to a pulse-width of 871 fs. The time-bandwidth product was 0.344, which is close enough to transform-limited sech squared pulses. The repetition rate was 21.27 MHz, and a maximum average output power of 1 mW was also measured.

MEMS Reliability Assurance Guidelines for Space Applications

NASA Technical Reports Server (NTRS)

Stark, Brian (Editor)

1999-01-01

This guide is a reference for understanding the various aspects of microelectromechanical systems, or MEMS, with an emphasis on device reliability. Material properties, failure mechanisms, processing techniques, device structures, and packaging techniques common to MEMS are addressed in detail. Design and qualification methodologies provide the reader with the means to develop suitable qualification plans for the insertion of MEMS into the space environment.

Rationale for patient package inserts.

PubMed

Morris, L A

1978-02-01

The need for patient package inserts (PPIs) is discussed in terms of the "consumers' right-to-know" and "patient health education" themes, as well as the premise that verbal means of communication are often inadequate. Some of the reasons for the frequent failure of verbal messages are reviewed by detailing the five stages through which any communication must be processed in order to be effective. Verbal information may be inadequate because: (1) patients are not exposed to necessary material, (2) they may not pay attention to the information, (3) they may not understand it, (4) the information may not be accepted as valid, and (5) patients may not remember the material. Written communication which must be processed through the same five stages also may be frequently inadequate. Therefore, PPIs must be viewed as reinforcing and augmenting verbal consultation, and both written and verbal forms are necessary. Consumer surveys and demonstration projects have shown that written communications are a desired and effective means for conveying additional prescription drug information to patients. The wide implementation of PPIs is apt to cause many problems for the pharmacists; however, it may also serve as a means to enhance the pharmacist's clinical role.

Graphical content of medicinal package inserts: an exploratory study to evaluate potential legibility issues.

PubMed

Pires, Carla; Vigário, Marina; Cavaco, Afonso

2016-06-01

The graphical content of the Medicines Package Inserts (MPIs), such as illustrations and typographic features should be legible and appropriate, as required by international pharmaceutical regulations. To study: (1) the frequency and type of MPIs' key graphic elements, (2) their compliance with regulations and (3) how educated people understand them. Descriptive study: characterisation of the graphical content of 651 MPIs. Usability study: illustrations and tables (purposively selected) were evaluated with questionnaires in three groups of humanities undergraduates (illustrations only, illustrations plus text and text only). Descriptive study: illustrations and tables were respectively identified in 6.3% and 11.8% of the MPIs. The illustrations were mainly related to how to take/use the medicine. Non-recommended graphical representations were found (e.g. italic or underline). Usability test: legibility issues were identified, especially for the group of isolated illustrations. The scarce use of illustrations and tables possibly affected the legibility of the MPIs. Compulsory legibility tests are needed to guarantee the MPIs' proper use, thus contributing to a safe use of medicines. Overall, this study highlighted the need to carefully revise/assess the MPIs' design and probably increase health information experts' awareness on this issue. © 2015 Health Libraries Group.

Development of fisetin-loaded folate functionalized pluronic micelles for breast cancer targeting.

PubMed

Pawar, Atmaram; Singh, Srishti; Rajalakshmi, S; Shaikh, Karimunnisa; Bothiraja, C

2018-01-15

The natural flavonoid fisetin (FS) has shown anticancer properties but its in-vivo administration remains challenging due to its poor aqueous solubility. The aim of the study was to develop FS loaded pluronic127 (PF)-folic acid (FA) conjugated micelles (FS-PF-FA) by the way of increasing solubility, bioavailability and active targetability of FS shall increase its therapeutic efficacy. FA-conjugated PF was prepared by carbodiimide crosslinker chemistry. FS-PF-FA micelles were prepared by thin-film hydration method and evaluated in comparison with free FS and FS loaded PF micelles (FS-PF). The smooth surfaces with spherical in shape of FS-PF-PF micelles displayed smaller in size (103.2 ± 6.1 nm), good encapsulation efficiency (82.50 ± 1.78%), zeta potential (-26.7 ± 0.44 mV) and sustained FS release. Bioavailability of FS from FS-PF-PF micelles was increased by 6-fold with long circulation time, slower plasma elimination and no sign of tissue toxicity as compared to free FS. Further, the FS-PF-FA micelles demonstrated active targeting effect on folate overexpressed human breast cancer MCF-7 cells. The concentration of the drug needed for growth inhibition of 50% of cells in a designed time period (GI50) was 14.3 ± 1.2 µg/ml for FS while it was greatly decreased to 9.8 ± 0.78 µg/ml, i.e. a 31.46% decrease for the FS-PF. Furthermore, the GI50 value for FS-PF-FA was 4.9 ± 0.4 µg/ml, i.e. a 65.737% decrease compared to FS and 50% decrease compare to FS-PF. The results indicate that the FS-PF-FA micelles have the potential to be applied for targeting anticancer drug delivery.

A small and efficient dimerization/packaging signal of rat VL30 RNA and its use in murine leukemia virus-VL30-derived vectors for gene transfer.

PubMed

Torrent, C; Gabus, C; Darlix, J L

1994-02-01

Retroviral genomes consist of two identical RNA molecules associated at their 5' ends by the dimer linkage structure located in the packaging element (Psi or E) necessary for RNA dimerization in vitro and packaging in vivo. In murine leukemia virus (MLV)-derived vectors designed for gene transfer, the Psi + sequence of 600 nucleotides directs the packaging of recombinant RNAs into MLV virions produced by helper cells. By using in vitro RNA dimerization as a screening system, a sequence of rat VL30 RNA located next to the 5' end of the Harvey mouse sarcoma virus genome and as small as 67 nucleotides was found to form stable dimeric RNA. In addition, a purine-rich sequence located at the 5' end of this VL30 RNA seems to be critical for RNA dimerization. When this VL30 element was extended by 107 nucleotides at its 3' end and inserted into an MLV-derived vector lacking MLV Psi +, it directed the efficient encapsidation of recombinant RNAs into MLV virions. Because this VL30 packaging signal is smaller and more efficient in packaging recombinant RNAs than the MLV Psi + and does not contain gag or glyco-gag coding sequences, its use in MLV-derived vectors should render even more unlikely recombinations which could generate replication-competent viruses. Therefore, utilization of the rat VL30 packaging sequence should improve the biological safety of MLV vectors for human gene transfer.

A fully wafer-level packaged RF MEMS switch with low actuation voltage using a piezoelectric actuator

NASA Astrophysics Data System (ADS)

Park, Jae-Hyoung; Lee, Hee-Chul; Park, Yong-Hee; Kim, Yong-Dae; Ji, Chang-Hyeon; Bu, Jonguk; Nam, Hyo-Jin

2006-11-01

In this paper, a fully wafer-level packaged RF MEMS switch has been demonstrated, which has low operation voltage, using a piezoelectric actuator. The piezoelectric actuator was designed to operate at low actuation voltage for application to advanced mobile handsets. The dc contact type RF switch was packaged using the wafer-level bonding process. The CPW transmission lines and piezoelectric actuators have been fabricated on separate wafers and assembled together by the wafer-level eutectic bonding process. A gold and tin composite was used for eutectic bonding at a low temperature of 300 °C. Via holes interconnecting the electrical contact pads through the wafer were filled completely with electroplated copper. The fully wafer-level packaged RF MEMS switch showed an insertion loss of 0.63 dB and an isolation of 26.4 dB at 5 GHz. The actuation voltage of the switch was 5 V. The resonant frequency of the piezoelectric actuator was 38.4 kHz and the spring constant of the actuator was calculated to be 9.6 N m-1. The size of the packaged SPST (single-pole single-through) switch was 1.2 mm × 1.2 mm including the packaging sealing rim. The effect of the proposed package structure on the RF performance was characterized with a device having CPW through lines and vertical feed lines excluding the RF switches. The measured packaging loss was 0.2 dB and the return loss was 33.6 dB at 5 GHz.

Brominated flame retardants and the formation of dioxins and furans in fires and combustion.

PubMed

Zhang, Mengmei; Buekens, Alfons; Li, Xiaodong

2016-03-05

The widespread use and increasing inventory of brominated flame retardants (BFRs) have caused considerable concern, as a result of BFRs emissions to the environment and of the formation of both polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) and mixed polybromochloro-dibenzo-p-dioxins and dibenzofurans (PBCDD/Fs or PXDD/Fs). Structural similarities between PBDD/Fs and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) suggest the existence of comparable formation pathways of both PBDD/Fs and PCDD/Fs, yet BFRs also act as specific precursors to form additional PBDD/Fs. Moreover, elementary bromine (Br2) seems to facilitate chlorination by bromination of organics, followed by Br/Cl-exchange based on displacement through the more reactive halogen. Overall, PBDD/Fs form through three possible pathways: precursor formation, de novo formation, and dispersion of parts containing BFRs as impurities and surviving a fire or other events. The present review summarises the formation mechanisms of both brominated (PBDD/Fs) and mixed dioxins (PXDD/Fs with X=Br or Cl) from BFRs, recaps available emissions data of PBDD/Fs and mixed PXDD/Fs from controlled waste incineration, uncontrolled combustion sources and accidental fires, and identifies and analyses the effects of several local factors of influence, affecting the formation of PBDD/Fs and mixed PXDD/Fs during BFRs combustion. Copyright © 2015 Elsevier B.V. All rights reserved.

Differences in the Language and Design of Four PPIs for Valium. Technical Assistance Report No. 1.

ERIC Educational Resources Information Center

Redish, Janice C.

As part of the evaluation of four different versions of a patient package insert (PPI) for diazepam (Valium) created by the Food and Drug Administration (FDA), the content, organization, language, and design of the PPIs were compared. One PPI was a short prose piece with clear organization that did not particularly highlight warnings or, indeed,…

Research on a new fiber-optic axial pressure sensor of transformer winding based on fiber Bragg grating

NASA Astrophysics Data System (ADS)

Liu, Yuan; Li, Lianqing; Zhao, Lin; Wang, Jiqiang; Liu, Tongyu

2017-12-01

Based on the principle of the fiber Bragg grating, a new type of fiber-optic pressure sensor for axial force measurement of transformer winding is designed, which is designed with the structure of bending plate beam, the optimization of the packaging process, and material of the sensor. Through the calibration experiment to calibrate the sensor, the field test results of the Taikai transformer factory show that the sensitivity of the sensor is 0.133 pm/kPa and the repeatability error is 2.7% FS. The data of the fiber-optic pressure sensor in different positions maintain consistent and repeatable, which can meet the requirement of the real-time monitoring of the axial force of transformer winding.

Endoscopic stenting for hilar cholangiocarcinoma: efficacy of unilateral and bilateral placement of plastic and metal stents in a retrospective review of 480 patients

PubMed Central

2012-01-01

Background Endoscopic biliary drainage of hilar cholangiocarcinoma is controversial with respect to the optimal types of stents and the extent of drainage. This study evaluated endoscopic palliation in patients with hilar cholangiocarcinoma using self-expandable metallic stents (SEMS) and plastic stents (PS).We also compared unilateral and bilateral stent placement according to the Bismuth classification. Methods Data on 480 patients receiving endoscopic biliary drainage for hilar cholangiocarcinoma between September 1995 and December 2010 were retrospectively reviewed to evaluate the following outcome parameters: technical success (TS), functional success (FS), early and late complications, stent patency and survival. Patients were followed from stent insertion until death or stent occlusion. Patients were divided into 3 groups according to the Bismuth classification (Group 1, type I; Group 2, type II; Group 3, type > III). Results The initial stent insertion was successful in 450 (93.8%) patients. TS was achieved in 204 (88.3%) patients treated with PS and in 246 (98.8%) patients palliated with SEMS (p < 0.001). In the intention-to-treat (ITT) analysis, the FS in patients treated with SEMS (97.9%) was significantly higher than in patients treated with PS (84.8%) (p < 0.001). Late complications occurred in 115 (56.4%) patients treated with PS and 60 (24.4%) patients treated with SEMS (p < 0.001). The median duration of stent patency in weeks (w) were as follows: 20 w in patients palliated with PS and 27 w in patients treated with SEMS (p < 0.0001). In Group 2, the median duration of PS patency was 17 w and 18 w for unilateral and bilateral placement, respectively (p = 0.0004); the median duration of SEMS patency was 24 w and 29 w for unilateral and bilateral placement, respectively (p < 0.0001). Multivariate analysis using the Poisson regression showed that SEMS placement (B = 0.48; P < 0.01) and bilateral deployment (B = 0.24; P < 0.01) were the only independent prognostic factors associated with stent patency. Conclusions SEMS insertion for the palliation of hilar cholangiocarcinoma offers higher technical and clinical success rates in the ITT analysis as well as lower complication rates and a superior cumulative stent patency when compared with PS placement in all Bismuth classifications. The cumulative patency of bilateral SEMS or PS stents was significantly higher than that of unilateral SEMS or PS stents, with lower occlusion rates in Bismuth II patients. PMID:22873816

Influence of the Thermal Conductivity of Thermally Conductive Plastics on the Thermal Distribution of an Light-Emitting Diode Headlight for Vehicles.

PubMed

Lee, Dong Kyu; Lee, Jae Min; Cho, Moon Uk; Park, Hyun Jung; Cha, Yu-Jung; Kim, Hyeong Jin; Kwak, Joon Seop

2018-09-01

This paper investigates the thermal distribution of an LED headlight for vehicles based on the thermal conductivity of thermally conductive plastics (TCP). In general, heat dissipation structures used for LED headlights are made from metallic materials. However, headlight structures made from TCP have not been investigated. The headlights made from TCP having a various thermal conductivity were fabricated by injection molding with and without a metal plate insert. The temperature characteristics were compared and analyzed using thermal simulations and measurement. The inserted metal in TCP greatly reduced the temperature at solder point, indicating that the fast heat dissipation from the high power LED package to TCP though the inserted metal is essential. The measured temperature at solder points decreased as the thermal conductivity of TCP increased, which is well matched to the simulation results. The measured temperature at the solder point was lower than 150 °C when the thermal conductivity of the TCP was 10 W/mK.

The economic value of rapid deployment aortic valve replacement via full sternotomy.

PubMed

Moore, Matt; Barnhart, Glenn R; Chitwood, W Randolph; Rizzo, John A; Gunnarsson, Candace; Palli, Swetha R; Grossi, Eugene A

2017-06-01

To compare the economic value of EDWARDS INTUITY Elite™ (EIE) valve system for rapid-deployment aortic valve replacement (RDAVR) in a full sternotomy (FS) approach (EIE-FS-RDAVR) versus FS-AVR using conventional stented bioprosthesis. A simulation model to compare each treatment's 30-day inpatient utilization and complication rates utilized: clinical end points obtained from the TRANSFORM trial patient subset (EIE-FS-RDAVR) and a best evidence review of the published literature (FS-AVR); and costs from the Premier database and published literature. EIE-FS-RDAVR costs $800 less than FS-AVR per surgery episode attributable to lowered complication rates and utilization. Combined with the lower mortality, EIE-FS-RDAVR was a superior (dominant) technology versus FS-AVR. This preliminary investigation of EIE-FS-RDAVR versus conventional FS-AVR found the EIE valve offered superior economic value over a 30-day period. Real-world analyses with additional long-term follow-up are needed to evaluate if this result can be replicated over a longer timeframe.

An alphavirus temperature-sensitive capsid mutant reveals stages of nucleocapsid assembly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Yan, E-mail: yzheng15@students.kgi.edu; Kielian, Margaret, E-mail: margaret.kielian@einstein.yu.edu

2015-10-15

Alphaviruses have a nucleocapsid core composed of the RNA genome surrounded by an icosahedral lattice of capsid protein. An insertion after position 186 in the capsid protein produced a strongly temperature-sensitive growth phenotype. Even when the structural proteins were synthesized at the permissive temperature (28 °C), subsequent incubation of the cells at the non-permissive temperature (37 °C) dramatically decreased mutant capsid protein stability and particle assembly. Electron microscopy confirmed the presence of cytoplasmic nucleocapsids in mutant-infected cells cultured at the permissive temperature, but these nucleocapsids were not stable to sucrose gradient separation. In contrast, nucleocapsids isolated from mutant virus particlesmore » had similar stability to that of wildtype virus. Our data support a model in which cytoplasmic nucleocapsids go through a maturation step during packaging into virus particles. The insertion site lies in the interface between capsid proteins in the assembled nucleocapsid, suggesting the region where such a stabilizing transition occurs. - Highlights: • We characterize an alphavirus capsid insertion mutation. • These capsid mutants are highly temperature sensitive for growth. • The insertion affects nucleocapsid stability. • Results suggest that the nucleocapsid is stabilized during virus budding.« less

Graphene-gold supercapacitor as a voltage controlled saturable absorber for femtosecond pulse generation.

PubMed

Baylam, Isinsu; Balci, Osman; Kakenov, Nurbek; Kocabas, Coskun; Sennaroglu, Alphan

2016-03-01

We report, for the first time to the best of our knowledge, use of a graphene-gold supercapacitor as a voltage controlled fast saturable absorber for femtosecond pulse generation. The unique design involving only one graphene electrode lowers the insertion loss of the device, in comparison with capacitor designs with two graphene electrodes. Furthermore, use of the high-dielectric electrolyte allows reversible, adjustable control of the absorption level up to the visible region with low bias voltages of only a few volts (0-2 V). The fast saturable absorber action of the graphene-gold supercapacitor was demonstrated inside a multipass-cavity Cr:forsterite laser to generate nearly transform-limited, sub-100 fs pulses at a pulse repetition rate of 4.51 MHz at 1.24 μm.

A powerful enhancement to the DMAP alter capability

NASA Technical Reports Server (NTRS)

Pamidi, P. R.

1989-01-01

A powerful enhancement to the DMAP alter capability was developed and is available on all RPK-supported versions of COSMIC/NASTRAN. This enhancement involves the addition of two alter control cards, called INSERT and DELETE, to the Executive Control Deck. These cards allow for DMAP alters to be made by referencing DMAP statements by their module names rather than by their statement numbers in the rigid format DMAP sequence. This allows for increased user convenience and flexibility and makes alters more meaningful to the user. In addition, DMAP alter packages employing the alter control cards will be much less susceptible to future changes in rigid format DMAPs than alter packages employing the standard ALTER control cards. The usage of the cards is illustrated by examples.

Follistatin induces muscle hypertrophy through satellite cell proliferation and inhibition of both myostatin and activin.

PubMed

Gilson, Hélène; Schakman, Olivier; Kalista, Stéphanie; Lause, Pascale; Tsuchida, Kunihiro; Thissen, Jean-Paul

2009-07-01

Follistatin (FS) inhibits several members of the TGF-beta superfamily, including myostatin (Mstn), a negative regulator of muscle growth. Mstn inhibition by FS represents a potential therapeutic approach of muscle atrophy. The aim of our study was to investigate the mechanisms of the FS-induced muscle hypertrophy. To test the role of satellite cells in the FS effect, we used irradiation to destroy their proliferative capacity. FS overexpression increased the muscle weight by about 37% in control animals, but the increase reached only 20% in irradiated muscle, supporting the role of cell proliferation in the FS-induced hypertrophy. Surprisingly, the muscle hypertrophy caused by FS reached the same magnitude in Mstn-KO as in WT mice, suggesting that Mstn might not be the only ligand of FS involved in the regulation of muscle mass. To assess the role of activin (Act), another FS ligand, in the FS-induced hypertrophy, we electroporated FSI-I, a FS mutant that does not bind Act with high affinity. Whereas FS electroporation increased muscle weight by 32%, the muscle weight gain induced by FSI-I reached only 14%. Furthermore, in Mstn-KO mice, FSI-I overexpression failed to induce hypertrophy, in contrast to FS. Therefore, these results suggest that Act inhibition may contribute to FS-induced hypertrophy. Finally, the role of Act as a regulator of muscle mass was supported by the observation that ActA overexpression induced muscle weight loss (-15%). In conclusion, our results show that satellite cell proliferation and both Mstn and Act inhibition are involved in the FS-induced muscle hypertrophy.

Reference Gene Validation for RT-qPCR, a Note on Different Available Software Packages

PubMed Central

De Spiegelaere, Ward; Dern-Wieloch, Jutta; Weigel, Roswitha; Schumacher, Valérie; Schorle, Hubert; Nettersheim, Daniel; Bergmann, Martin; Brehm, Ralph; Kliesch, Sabine; Vandekerckhove, Linos; Fink, Cornelia

2015-01-01

Background An appropriate normalization strategy is crucial for data analysis from real time reverse transcription polymerase chain reactions (RT-qPCR). It is widely supported to identify and validate stable reference genes, since no single biological gene is stably expressed between cell types or within cells under different conditions. Different algorithms exist to validate optimal reference genes for normalization. Applying human cells, we here compare the three main methods to the online available RefFinder tool that integrates these algorithms along with R-based software packages which include the NormFinder and GeNorm algorithms. Results 14 candidate reference genes were assessed by RT-qPCR in two sample sets, i.e. a set of samples of human testicular tissue containing carcinoma in situ (CIS), and a set of samples from the human adult Sertoli cell line (FS1) either cultured alone or in co-culture with the seminoma like cell line (TCam-2) or with equine bone marrow derived mesenchymal stem cells (eBM-MSC). Expression stabilities of the reference genes were evaluated using geNorm, NormFinder, and BestKeeper. Similar results were obtained by the three approaches for the most and least stably expressed genes. The R-based packages NormqPCR, SLqPCR and the NormFinder for R script gave identical gene rankings. Interestingly, different outputs were obtained between the original software packages and the RefFinder tool, which is based on raw Cq values for input. When the raw data were reanalysed assuming 100% efficiency for all genes, then the outputs of the original software packages were similar to the RefFinder software, indicating that RefFinder outputs may be biased because PCR efficiencies are not taken into account. Conclusions This report shows that assay efficiency is an important parameter for reference gene validation. New software tools that incorporate these algorithms should be carefully validated prior to use. PMID:25825906

Reference gene validation for RT-qPCR, a note on different available software packages.

PubMed

De Spiegelaere, Ward; Dern-Wieloch, Jutta; Weigel, Roswitha; Schumacher, Valérie; Schorle, Hubert; Nettersheim, Daniel; Bergmann, Martin; Brehm, Ralph; Kliesch, Sabine; Vandekerckhove, Linos; Fink, Cornelia

2015-01-01

An appropriate normalization strategy is crucial for data analysis from real time reverse transcription polymerase chain reactions (RT-qPCR). It is widely supported to identify and validate stable reference genes, since no single biological gene is stably expressed between cell types or within cells under different conditions. Different algorithms exist to validate optimal reference genes for normalization. Applying human cells, we here compare the three main methods to the online available RefFinder tool that integrates these algorithms along with R-based software packages which include the NormFinder and GeNorm algorithms. 14 candidate reference genes were assessed by RT-qPCR in two sample sets, i.e. a set of samples of human testicular tissue containing carcinoma in situ (CIS), and a set of samples from the human adult Sertoli cell line (FS1) either cultured alone or in co-culture with the seminoma like cell line (TCam-2) or with equine bone marrow derived mesenchymal stem cells (eBM-MSC). Expression stabilities of the reference genes were evaluated using geNorm, NormFinder, and BestKeeper. Similar results were obtained by the three approaches for the most and least stably expressed genes. The R-based packages NormqPCR, SLqPCR and the NormFinder for R script gave identical gene rankings. Interestingly, different outputs were obtained between the original software packages and the RefFinder tool, which is based on raw Cq values for input. When the raw data were reanalysed assuming 100% efficiency for all genes, then the outputs of the original software packages were similar to the RefFinder software, indicating that RefFinder outputs may be biased because PCR efficiencies are not taken into account. This report shows that assay efficiency is an important parameter for reference gene validation. New software tools that incorporate these algorithms should be carefully validated prior to use.

Targeted therapy by combined inhibition of the RAF and mTOR kinases in malignant spindle cell neoplasm harboring the KIAA1549-BRAF fusion protein.

PubMed

Subbiah, Vivek; Westin, Shannon N; Wang, Kai; Araujo, Dejka; Wang, Wei-Lien; Miller, Vincent A; Ross, Jeffrey S; Stephens, Phillip J; Palmer, Gary A; Ali, Siraj M

2014-01-14

Oncologic patients who are extreme responders to molecularly targeted therapy provide an important opportunity to better understand the biologic basis of response and, in turn, inform clinical decision making. Malignant neoplasms with an uncertain histologic and immunohistochemical characterization present challenges both on initial diagnostic workups and then later in management, as current treatment algorithms are based on a morphologic diagnosis. Herein, we report a case of a difficult to characterize sarcoma-like lesion for which genomic profiling with clinical next generation sequencing (NGS) identified the molecular underpinnings of arrested progression(stable disease) under combination targeted therapy within a phase I clinical trial. Genomic profiling with clinical next generation sequencing was performed on the FoundationOne™ platform (Foundation Medicine, Cambridge MA). Histopathology and immunohistochemical studies were performed in the Department of Pathology, MD Anderson Cancer Center (Houston, TX). Treatment was administered in the context of a phase I clinical trial ClinicalTrials.gov Identifier: (NCT01187199). The histology of the tumor was that of a spindle cell neoplasm, grade 2 by FNCLCC standards. Immunohistochemical staining was positive for S100 and CD34. Genomic profiling identified the following alterations: a KIAA1549-BRAF gene fusion resulting from a tandem duplication event, a homozygous deletion of PTEN, and frameshift insertion/deletions in CDKN2A A68fs*51, SUFU E283fs*3, and MAP3K1 N325fs*3. The patient had a 25% reduction in tumor (RECIST v1.1) following combination therapy consisting of sorafenib, temsirolimus, and bevazicumab within a phase I clinical trial. The patient responded to combination targeted therapy that fortuitously targeted KIAA1549-BRAF and PTEN loss within a spindle cell neoplasm, as revealed by genomic profiling based on NGS. This is the first report of a tumor driven by a KIAA1549-BRAF fusion responding to sorafenib-based combination therapy.

Unlocking Short Read Sequencing for Metagenomics

DOE PAGES

Rodrigue, Sébastien; Materna, Arne C.; Timberlake, Sonia C.; ...

2010-07-28

We describe an experimental and computational pipeline yielding millions of reads that can exceed 200 bp with quality scores approaching that of traditional Sanger sequencing. The method combines an automatable gel-less library construction step with paired-end sequencing on a short-read instrument. With appropriately sized library inserts, mate-pair sequences can overlap, and we describe the SHERA software package that joins them to form a longer composite read.

Consumer and health literacy: The need to better design tobacco-cessation product packaging, labels, and inserts.

PubMed

Weiss, Stephanie M; Smith-Simone, Stephanie Y

2010-03-01

Tobacco-cessation product packaging and instruction materials may not be appropriate for some smokers and may contribute to the underuse and misuse of evidence-based treatments. The dual goals of this project are to analyze literacy levels of Food and Drug Administration (FDA)-approved and non-approved tobacco-cessation product packaging, directions, and claims, and to identify and categorize claims found on product packaging. The Campaign for Tobacco Free Kids (CTFK) maintains the Quitting and Reducing Tobacco Use Inventory of Products (QuiTIP) database, which catalogs products marketed and sold to consumers to reduce or quit use of tobacco products. It also includes all medications approved by the FDA for tobacco cessation as well as a sample of non-approved products such as homeopathic, herbal, nutritional, or dietary supplements commonly marketed as either cessation aids or alternative tobacco/nicotine products. This paper assesses the reading levels required to understand product packaging, labeling, and instructions using the Simple Measure of Gobbledygook (SMOG) and identifies claims on the product package labels using standard qualitative methods. Key findings show that the average reading levels needed to understand instructions for both FDA-approved and non-approved cessation products are above the reading levels recommended to ensure maximum comprehension. Improving the packaging and directions of evidence-based tobacco-cessation products so that they are preferably at or below a fifth-grade reading level, along with using consumer-based design principles to develop packaging, may help smokers take advantage of and correctly use products that will greatly increase their chances of successful quitting. 2010 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Reliability of CGA/LGA/HDI Package Board/Assembly (Final Report)

NASA Technical Reports Server (NTRS)

Ghaffaroam. Reza

2014-01-01

Package manufacturers are now offering commercial-off-the-shelf column grid array (COTS CGA) packaging technologies in high-reliability versions. Understanding the process and quality assurance (QA) indicators for reliability are important for low-risk insertion of these advanced electronics packages. The previous reports, released in January of 2012 and January of 2013, presented package test data, assembly information, and reliability evaluation by thermal cycling for CGA packages with 1752, 1517, 1509, and 1272 inputs/outputs (I/Os) and 1-mm pitch. It presented the thermal cycling (-55C either 100C or 125C) test results for up to 200 cycles. This report presents up to 500 thermal cycles with quality assurance and failure analysis evaluation represented by optical photomicrographs, 2D real time X-ray images, dye-and-pry photomicrographs, and optical/scanning electron Microscopy (SEM) cross-sectional images. The report also presents assembly challenge using reflowing by either vapor phase or rework station of CGA and land grid array (LGA) versions of three high I/O packages both ceramic and plastic configuration. A new test vehicle was designed having high density interconnect (HDI) printed circuit board (PCB) with microvia-in-pad to accommodate both LGA packages as well as a large number of fine pitch ball grid arrays (BGAs). The LGAs either were assembled onto HDI PCB as an LGA or were solder paste print and reflow first to form solder dome on pads before assembly. Both plastic BGAs with 1156 I/O and ceramic LGAs were assembled. It also presented the X-ray inspection results as well as failures due to 200 thermal cycles. Lessons learned on assembly of ceramic LGAs are also presented.

Variation in Prescribing Patterns and Therapeutic Drug Monitoring of Intravenous Busulfan in Pediatric Hematopoietic Cell Transplant Recipients

PubMed Central

McCune, Jeannine S.; Baker, K. Scott; Blough, David K.; Gamis, Alan; Bemer, Meagan J.; Kelton-Rehkopf, Megan C.; Winter, Laura; Barrett, Jeffrey S.

2016-01-01

Personalizing intravenous (IV) busulfan doses in children using therapeutic drug monitoring (TDM) is an integral component of hematopoietic cell transplant. The authors sought to characterize initial dosing and TDM of IV busulfan, along with factors associated with busulfan clearance, in 729 children who underwent busulfan TDM from December 2005 to December 2008. The initial IV busulfan dose in children weighing ≤12 kg ranged 4.8-fold, with only 19% prescribed the package insert dose of 1.1 mg/kg. In those children weighing >12 kg, the initial dose ranged 5.4-fold, and 79% were prescribed the package insert dose. The initial busulfan dose achieved the target exposure in only 24.3% of children. A wide range of busulfan exposures were targeted for children with the same disease (eg, 39 target busulfan exposures for the 264 children diagnosed with acute myeloid leukemia). Considerable heterogeneity exists regarding when TDM is conducted and the number of pharmacokinetic samples obtained. Busulfan clearance varied by age and dosing frequency but not by underlying disease. The authors’ group is currently evaluating how using population pharmacokinetics to optimize initial busulfan dose and TDM (eg, limited sampling schedule in conjunction with maximum a posteriori Bayesian estimation) may affect clinical outcomes in children. PMID:23444282

A small and efficient dimerization/packaging signal of rat VL30 RNA and its use in murine leukemia virus-VL30-derived vectors for gene transfer.

PubMed Central

Torrent, C; Gabus, C; Darlix, J L

1994-01-01

Retroviral genomes consist of two identical RNA molecules associated at their 5' ends by the dimer linkage structure located in the packaging element (Psi or E) necessary for RNA dimerization in vitro and packaging in vivo. In murine leukemia virus (MLV)-derived vectors designed for gene transfer, the Psi + sequence of 600 nucleotides directs the packaging of recombinant RNAs into MLV virions produced by helper cells. By using in vitro RNA dimerization as a screening system, a sequence of rat VL30 RNA located next to the 5' end of the Harvey mouse sarcoma virus genome and as small as 67 nucleotides was found to form stable dimeric RNA. In addition, a purine-rich sequence located at the 5' end of this VL30 RNA seems to be critical for RNA dimerization. When this VL30 element was extended by 107 nucleotides at its 3' end and inserted into an MLV-derived vector lacking MLV Psi +, it directed the efficient encapsidation of recombinant RNAs into MLV virions. Because this VL30 packaging signal is smaller and more efficient in packaging recombinant RNAs than the MLV Psi + and does not contain gag or glyco-gag coding sequences, its use in MLV-derived vectors should render even more unlikely recombinations which could generate replication-competent viruses. Therefore, utilization of the rat VL30 packaging sequence should improve the biological safety of MLV vectors for human gene transfer. Images PMID:8289369

Matrix metalloproteinase-9 expression in folliculostellate cells of rat anterior pituitary gland.

PubMed

Ilmiawati, Cimi; Horiguchi, Kotaro; Fujiwara, Ken; Yashiro, Takashi

2012-03-01

Folliculostellate (FS) cells of the anterior pituitary gland express a variety of regulatory molecules. Using transgenic rats that express green fluorescent protein specifically in FS cells, we recently demonstrated that FS cells in vitro showed marked changes in motility, proliferation, and that formation of cellular interconnections in the presence of laminin, a component of the extracellular matrix, closely resembled those observed in vivo. These findings suggested that FS cells express matrix metalloproteinase-9 (MMP-9), which assists their function on laminin. In the present study, we investigate MMP-9 expression in rat anterior pituitary gland and examine its role in motility and proliferation of FS cells on laminin. Immunohistochemistry, RT-PCR, immunoblotting, and gelatin zymography were performed to assess MMP-9 expression in the anterior pituitary gland and cultured FS cells. Real-time RT-PCR was used to quantify MMP-9 expression in cultured FS cells under different conditions and treatments. MMP-9 expression was inhibited by pharmacological inhibitor or downregulated by siRNA and time-lapse images were acquired. A 5-bromo-2'-deoxyuridine assay was performed to analyze the proliferation of FS cells. Our results showed that MMP-9 was expressed in FS cells, that this expression was upregulated by laminin, and that laminin induced MMP-9 secretion by FS cells. MMP-9 inhibition and downregulation did not impair FS motility; however, it did impair the capacity of FS cells to form interconnections and it significantly inhibited proliferation of FS cells on laminin. We conclude that MMP-9 is necessary in FS cell interconnection and proliferation in the presence of laminin.

Assessment of triglyceride and cholesterol in overweight people based on multiple linear regression and artificial intelligence model.

PubMed

Ma, Jing; Yu, Jiong; Hao, Guangshu; Wang, Dan; Sun, Yanni; Lu, Jianxin; Cao, Hongcui; Lin, Feiyan

2017-02-20

The prevalence of high hyperlipemia is increasing around the world. Our aims are to analyze the relationship of triglyceride (TG) and cholesterol (TC) with indexes of liver function and kidney function, and to develop a prediction model of TG, TC in overweight people. A total of 302 adult healthy subjects and 273 overweight subjects were enrolled in this study. The levels of fasting indexes of TG (fs-TG), TC (fs-TC), blood glucose, liver function, and kidney function were measured and analyzed by correlation analysis and multiple linear regression (MRL). The back propagation artificial neural network (BP-ANN) was applied to develop prediction models of fs-TG and fs-TC. The results showed there was significant difference in biochemical indexes between healthy people and overweight people. The correlation analysis showed fs-TG was related to weight, height, blood glucose, and indexes of liver and kidney function; while fs-TC was correlated with age, indexes of liver function (P < 0.01). The MRL analysis indicated regression equations of fs-TG and fs-TC both had statistic significant (P < 0.01) when included independent indexes. The BP-ANN model of fs-TG reached training goal at 59 epoch, while fs-TC model achieved high prediction accuracy after training 1000 epoch. In conclusions, there was high relationship of fs-TG and fs-TC with weight, height, age, blood glucose, indexes of liver function and kidney function. Based on related variables, the indexes of fs-TG and fs-TC can be predicted by BP-ANN models in overweight people.

Fat suppression in magnetic resonance imaging of the head and neck region: is the two-point DIXON technique superior to spectral fat suppression?

PubMed

Wendl, Christina M; Eiglsperger, Johannes; Dendl, Lena-Marie; Brodoefel, Harald; Schebesch, Karl-Michael; Stroszczynski, Christian; Fellner, Claudia

2018-05-01

The aim of our study was to systematically compare two-point Dixon fat suppression (FS) and spectral FS techniques in contrast enhanced imaging of the head and neck region. Three independent readers analysed coronal T 1 weighted images recorded after contrast medium injection with Dixon and spectral FS techniques with regard to FS homogeneity, motion artefacts, lesion contrast, image sharpness and overall image quality. 85 patients were prospectively enrolled in the study. Images generated with Dixon-FS technique were of higher overall image quality and had a more homogenous FS over the whole field of view compared with the standard spectral fat-suppressed images (p < 0.001). Concerning motion artefacts, flow artefacts, lesion contrast and image sharpness no statistically significant difference was observed. The Dixon-FS technique is superior to the spectral technique due to improved homogeneity of FS and overall image quality while maintaining lesion contrast. Advances in knowledge: T 1 with Dixon FS technique offers, compared to spectral FS, significantly improved FS homogeneity and over all image quality in imaging of the head and neck region.

Evaluation of PCDD/Fs emissions during ceramic production: a laboratory study.

PubMed

Lu, Mang; Luo, Yi-Jing; Zhang, Zhong-Zhi; Xiao, Meng; Zhang, Min

2012-08-30

Because of the ubiquity of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in kaolinitic clays, the ceramic industry is considered to be a potential source of PCDD/Fs. However, studies on the emission of PCDD/Fs from ceramic production are still very scarce. In this study, PCDD/Fs emissions during ceramic production were investigated in an electric laboratory batch kiln. The results showed that the PCDD/Fs were completely removed from the ceramic pieces after 30 min of firing at the peak temperature of 1200°C. Nevertheless, on the mass and international toxic equivalent basis, 27.5% and 46.2% of the total PCDD/Fs amount in the raw clay were released into the atmosphere during firing, respectively. These PCDD/Fs were emitted into the air before the temperature was elevated to a level high enough for their destruction. Dechlorination reactions generated a broad distribution within the PCDD/Fs congeners including a variety of non-2,3,7,8-substituted ones. The emission of PCDD/Fs was decreased to 16.3 wt.% of the total PCDD/Fs amount in the raw clay, when the initial kiln temperature was enhanced to 600°C. The emission of PCDD/Fs could be reduced significantly in the presence of a glaze coating on the ceramic test piece. These results indicated that ceramic production is an un-neglectable source of PCDD/Fs in the environment. Copyright © 2012 Elsevier B.V. All rights reserved.

A review of dioxin-related substances during municipal solid waste incineration.

PubMed

Zhou, Hui; Meng, Aihong; Long, Yanqiu; Li, Qinghai; Zhang, Yanguo

2015-02-01

Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) are among the most toxic chemicals and the main restriction on municipal solid waste incineration. To exert more effective control over the formation of dioxin homologues during municipal solid waste incineration, it is significant to investigate dioxin-related compounds. Despite the numerous studies about PCDD/Fs, a unified understanding regarding many problems has yet to be reached because the homologues of PCDD/Fs are excessive, the measurement of PCDD/Fs is difficult, and the formation mechanisms of PCDD/Fs are complicated. Firstly, this paper briefly introduces the different formation mechanisms of PCDD/Fs, including high temperature homogeneous reaction PCDD/Fs formation and low temperature heterogeneous reaction PCDD/Fs formation. Then the sources of PCDD/Fs including precursors (chlorophenols and polycyclic aromatic hydrocarbons) and residual carbon are summarized. In particular, this paper analyzes the substances that influence PCDD/Fs formation and their impact mechanisms, including different categories of chlorine (Cl2, HCl and chloride in fly ash), O2, copper, sulfur, water, and nitrogen compounds (ammonia and urea). Due to the high cost and complexity of PCDD/Fs measurement, PCDD/Fs indicators, especially chlorobenzenes and polycyclic aromatic hydrocarbons, are summarized, to find an effective surrogate for quick, convenient and real-time monitoring of PCDD/Fs. Finally, according to the results of the current study, recommendations for further research and industrial applications prospects are proposed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Efficient high-harmonic generation from a stable and compact ultrafast Yb-fiber laser producing 100 μJ, 350 fs pulses based on bendable photonic crystal fiber

NASA Astrophysics Data System (ADS)

Feehan, James S.; Price, Jonathan H. V.; Butcher, Thomas J.; Brocklesby, William S.; Frey, Jeremy G.; Richardson, David J.

2017-01-01

The development of an Yb3+-fiber-based chirped-pulse amplification system and the performance in the generation of extreme ultraviolet (EUV) radiation by high-harmonic generation is reported. The fiber laser produced 100 μJ, 350 fs output pulses with diffraction-limited beam quality at a repetition rate of 16.7 kHz. The system used commercial single-mode, polarization maintaining fiber technology. This included a 40 μm core, easily packaged, bendable final amplifier fiber in order to enable a compact system, to reduce cost, and provide reliable and environmentally stable long-term performance. The system enabled the generation of 0.4 μW of EUV at wavelengths between 27 and 80 nm with a peak at 45 nm using xenon gas. The EUV flux of 1011 photons per second for a driving field power of 1.67 W represents state-of-the-art generation efficiency for single-fiber amplifier CPA systems, corresponding to a maximum calculated energy conversion efficiency of 2.4 × 10-7 from the infrared to the EUV. The potential for high average power operation at increased repetition rates and further suggested technical improvements are discussed. Future applications could include coherent diffractive imaging in the EUV, and high-harmonic spectroscopy.

Surface acoustic wave resonators

NASA Astrophysics Data System (ADS)

Avitabile, Gianfranco; Roselli, Luca; Atzeni, Carlo; Manes, Gianfranco

1991-10-01

The development of surface acoustic wave (SAW) resonators is reviewed with attention given to the design of a simulation package for CAD-assisted SAW resonator design. Basic design configurations and operation parameters are set forth for the SAW resonators including the phase of the reflection factor, evaluation of the stopband center frequency, stopband width, and the free propagation speed. The use of synchronous designs is shown to reduce device sensitivity to variations in the technological process but generate higher insertion losses. The existence of transverse modes and propagation losses is shown to affect the rejection of spurious modes and the achievement of low insertion losses. Several SAW resonators are designed and fabricated with the CAD process, and the resonators in the VHF-UHF bands perform in a manner predicted by simulated results.

Expression of chemokine CXCL12 and its receptor CXCR4 in folliculostellate (FS) cells of the rat anterior pituitary gland: the CXCL12/CXCR4 axis induces interconnection of FS cells.

PubMed

Horiguchi, Kotaro; Ilmiawati, Cimi; Fujiwara, Ken; Tsukada, Takehiro; Kikuchi, Motoshi; Yashiro, Takashi

2012-04-01

The anterior pituitary gland is composed of five types of hormone-producing cells plus folliculostellate (FS) cells, which do not produce classical anterior pituitary hormones. FS cells are interconnected by cytoplasmic processes and encircle hormone-producing cells or aggregate homophilically. Using living-cell imaging of primary culture, we recently reported that some FS cells precisely extend their cytoplasmic processes toward other FS cells and form interconnections with them. These phenomena suggest the presence of a chemoattractant factor that facilitates the interconnection. In this study, we attempted to discover the factor that induces interconnection of FS cells and succeeded in identifying chemokine (CXC)-L12 and its receptor CXCR4 as potential candidate molecules. CXCL12 is a chemokine of the CXC subfamily. It exerts its effects via CXCR4, a G protein-coupled receptor. The CXCL12/CXCR4 axis is a potent chemoattractant for many types of neural cells. First, we revealed that CXCL12 and CXCR4 are expressed by FS cells in rat anterior pituitary gland. Next, to clarify the function of the CXCL12/CXCR4 axis in FS cells, we observed living anterior pituitary cells in primary culture with specific CXCL12 inhibitor or CXCR4 antagonist and noted that extension of cytoplasmic processes and interconnection of FS cells were inhibited. Finally, we examined FS cell migration and invasion by using Matrigel matrix assays. CXCL12 treatment resulted in markedly increased FS cell migration and invasion. These data suggest that FS cells express chemokine CXCL12 and its receptor CXCR4 and that the CXCL12/CXCR4 axis evokes interconnection of FS cells.

Diagnostic accuracy of frozen-section analysis of cancer-containing bladder transurethral resection specimens for the presence of muscularis propria invasion.

PubMed

Goyal, Rajen; Zhu, Bing; Parimi, Vamsi; Lin, Xiaoqi; Rohan, Stephen M

2014-07-01

Frozen section (FS) consultation is generally an accurate diagnostic modality. At our institution, we are frequently asked to assess transurethral resection specimens (TURBT) at FS for muscularis propria (MP) invasion by carcinoma. This study documents our experience in evaluating cancer-containing TURBT specimens at FS for MP invasion. 32 TURBT sent for FS from 2008-2010 were identified. The FS and permanent section (PS) diagnoses were reviewed. Cases excluded from the calculation of test performance included: (1) cases without cancer on FS or PS slides, (2) FS diagnosis deferred, (3) cases without MP on FS and subsequent PS slides. Sensitivity (SEN), specificity (SPEC), positive predictive value (PPV), and negative predictive value (NPV) for identifying MP invasion at FS were calculated. In 6 cases, no cancer was present in FS or PS slides (18%). The FS diagnosis was deferred on 3 cases (9%). In one case (3%) MP was not present in the FS or the subsequent PS slides. Of the remaining 22 cases, 2 false positive and 6 false negative diagnoses of MP invasion were identified. The test performance for FS assessment of MP invasion in TURB were SEN=33%, SPEC=84%, PPV=60%, and NPV=64%. Identifying MP invasion on PS can be difficult, and our results suggest that this is more difficult at FS. Though this study is based on small numbers, our results point to the conclusion that examination of TURBT specimens for MP invasion is best done on PS. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Emission factors and congener-specific characterization of PCDD/Fs, PCBs, PBDD/Fs and PBDEs from an off-road diesel engine using waste cooking oil-based biodiesel blends.

PubMed

Chen, Shui-Jen; Tsai, Jen-Hsiung; Chang-Chien, Guo-Ping; Huang, Kuo-Lin; Wang, Lin-Chi; Lin, Wen-Yinn; Lin, Chih-Chung; Yeh, C Kuei-Jyum

2017-10-05

Few studies have been performed up to now on the emission factors and congener profiles of persistent organic pollutants (POPs) emitted from off-road diesel engines. This investigation elucidates the emission factors and congener profiles of various POPs, namely polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyl (PCBs), polybrominated dibenzo-p-dioxins and polybrominated dibenzofurans (PBDD/Fs) and polybrominated diphenyl ethers (PBDEs), in the exhausts of a diesel generator fueled with different waste cooking oil-based biodiesel (WCO-based biodiesel) blends. The PCDD/Fs contributed 87.2% of total dioxin-like toxicity (PCDD/Fs+PCBs+PBDD/Fs) in the exhaust, while the PCBs and PBDD/Fs only contributed 8.2% and 4.6%, respectively. Compared with petroleum diesel, B20 (20vol% WCO-based biodiesel+80vol% diesel) reduced total toxicity by 46.5% for PCDD/Fs, 47.1% for PCBs, and 24.5% for PBDD/Fs, while B40 (40vol% WCO-based biodiesel+60vol% diesel) reduced it by 89.5% for PCDD/Fs, 57.1% for PCBs, and 63.2% for PBDD/Fs in POP emission factors. The use of WCO-based biodiesel not only solves the problem of waste oil disposal, but also lowers POP emissions from diesel generators. Copyright © 2017 Elsevier B.V. All rights reserved.

Retrieval of spectral aerosol optical thickness over land using ocean color sensors MERIS and SeaWiFS

NASA Astrophysics Data System (ADS)

von Hoyningen-Huene, W.; Yoon, J.; Vountas, M.; Istomina, L. G.; Rohen, G.; Dinter, T.; Kokhanovsky, A. A.; Burrows, J. P.

2011-02-01

For the determination of aerosol optical thickness (AOT) Bremen AErosol Retrieval (BAER) has been developed. Method and main features on the aerosol retrieval are described together with validation and results. The retrieval separates the spectral aerosol reflectance from surface and Rayleigh path reflectance for the shortwave range of the measured spectrum of top-of-atmosphere reflectance for wavelength less than 0.670 μm. The advantage of MERIS (Medium Resolution Imaging Spectrometer on the Environmental Satellite - ENVISAT - of the European Space Agency - ESA) and SeaWiFS (Sea viewing Wide Field Sensor on OrbView-2 spacecraft) observations is the availability of several spectral channels in the blue and visible range enabling the spectral determination of AOT in 7 (or 6) channels (0.412-0.670 μm) and additionally channels in the NIR, which can be used to characterize the surface properties. A dynamical spectral surface reflectance model for different surface types is used to obtain the spectral surface reflectance for this separation. The normalized differential vegetation index (NDVI), taken from the satellite observations, is the model input. Further surface bi-directional reflectance distribution function (BRDF) is considered by the Raman-Pinty-Verstraete (RPV) model. Spectral AOT is obtained from aerosol reflectance using look-up-tables, obtained from radiative transfer calculations with given aerosol phase functions and single scattering albedos either from aerosol models, given by model package "optical properties of aerosol components" (OPAC) or from experimental campaigns. Validations of the obtained AOT retrieval results with data of Aerosol Robotic Network (AERONET) over Europe gave a preference for experimental phase functions derived from almucantar measurements. Finally long-term observations of SeaWiFS have been investigated for 11 year trends in AOT. Western European regions have negative trends with decreasing AOT with time. For the investigated Asian region increasing AOT have been found.

Fabrication and Structural Design of Micro Pressure Sensors for Tire Pressure Measurement Systems (TPMS).

PubMed

Tian, Bian; Zhao, Yulong; Jiang, Zhuangde; Zhang, Ling; Liao, Nansheng; Liu, Yuanhao; Meng, Chao

2009-01-01

In this paper we describe the design and testing of a micro piezoresistive pressure sensor for a Tire Pressure Measurement System (TPMS) which has the advantages of a minimized structure, high sensitivity, linearity and accuracy. Through analysis of the stress distribution of the diaphragm using the ANSYS software, a model of the structure was established. The fabrication on a single silicon substrate utilizes the technologies of anisotropic chemical etching and packaging through glass anodic bonding. The performance of this type of piezoresistive sensor, including size, sensitivity, and long-term stability, were investigated. The results indicate that the accuracy is 0.5% FS, therefore this design meets the requirements for a TPMS, and not only has a smaller size and simplicity of preparation, but also has high sensitivity and accuracy.

KSC-97PC1277

NASA Image and Video Library

1997-08-22

In the Payload Hazardous Servicing Facility (PHSF), Dan Maynard, a Jet Propulsion Laboratory technician, inserts the Digital Video Disk (DVD) into a shallow cavity between two pieces of aluminum that will protect it from micrometeoroid impacts. The package will be mounted to the side of the two-story-tall spacecraft beneath a pallet carrying cameras and other space instruments that will be used to study the Saturnian system. A specially designed, multicolored patch of thermal blanket material will be installed over the disk package. Along with the spacecraft, the disk will reside in Saturn's orbit centuries after the primary mission is completed in July 2008. The Cassini mission is managed for NASA's Office of Space Science, Washington, D.C., by the Jet Propulsion Laboratory, a division of the California Institute of Technology

Keeping waived tests simple.

PubMed

2004-01-01

Laboratories performing waived testing must follow the manufacturer's instructions as well as good laboratory practices to ensure that test results are reliable. Four things to concentrate on to maximize the performance and reliability of waived tests are to: 1. Read and follow the information found in the package inserts. 2. Follow the manufacturer's recommendations for running quality control. 3. Train staff members to perform tests correctly. 4. Follow established policies and procedures for patient testing in the practice.

Field Level Computer Exploitation Package

DTIC Science & Technology

2007-03-01

to take advantage of the data retrieved from the computer. Major Barge explained that if a tool could be designed that nearly anyone could use...the study of network forensics. This has become a necessity because of the constantly growing eCommerce industry and the stiff competition between...Security. One big advantage that Insert has is the fact that it is quite small compared to most bootable CDs. At only 60 megabytes it can be burned

Preparation of fluoride substituted apatite cements as the building blocks for tooth enamel restoration

NASA Astrophysics Data System (ADS)

Wei, Jie; Wang, Jiecheng; Liu, Xiaochen; Ma, Jian; Liu, Changsheng; Fang, Jing; Wei, Shicheng

2011-06-01

Fluoride substituted apatite cement (fs-AC) was synthesized by using the cement powders of tetracalcium phosphate (TTCP) and sodium fluoride (NaF), and the cement powders were mixed with diluted phosphoric acid (H 3PO 4) as cement liquid to form fs-AC paste. The fs-AC paste could be directly filled into the carious cavities to repair damaged dental enamel. The results indicated that the fs-AC paste was changed into fluorapatite crystals with the atom molar ratio for calcium to phosphorus of 1.66 and the F ion amount of 3 wt% after self-hardening for 2 days. The solubility of fs-AC in Tris-HCl solution (pH 6) was slightly lower than hydroxyapatite cement (HAC) that was similar to the apatite in enamel, indicating the fs-AC was much insensitive to the weakly acidic solution than the apatite in enamel. The fs-AC was tightly combined with the enamel surface because of the chemical reaction between the fs-AC and the apatite in enamel after the caries cavities was filled with fs-AC. The extracts of fs-AC caused no cytotoxicity on L929 cells, which satisfied the relevant criterion on dental biomaterials, revealing good cytocompatibility. The fs-AC had potential prospect for the reconstitution of carious lesion of dental enamel.

Preoperative retrolisthesis as a predictive risk factor of reoperation due to delayed-onset symptomatic foraminal stenosis after central decompression for lumbar canal stenosis without fusion.

PubMed

Ikegami, Daisuke; Hosono, Noboru; Mukai, Yoshihiro; Tateishi, Kosuke; Fuji, Takeshi

2017-08-01

For patients diagnosed with lumbar central canal stenosis with asymptomatic foraminal stenosis (FS), surgeons occasionally only decompress central stenosis and preserve asymptomatic FS. These surgeries have the potential risk of converting preoperative asymptomatic FS into symptomatic FS postoperatively by accelerating spinal degeneration, which requires reoperation. However, little is known about delayed-onset symptomatic FS postoperatively. This study aimed to evaluate the rate of reoperation for delayed-onset symptomatic FS after lumbar central canal decompression in patients with preoperative asymptomatic FS, and determine the predictive risk factors of those reoperations. This study is a retrospective cohort study. Two hundred eight consecutive patients undergoing posterior central decompression for lumbar canal stenosis between January 2009 and June 2014 were included in this study. The number of patients who had preoperative FS and the reoperation rate for delayed-onset symptomatic FS at the index levels were the outcome measures. Patients were divided into two groups with and without preoperative asymptomatic FS at the decompressed levels. The baseline characteristics and revision rates for delayed-onset symptomatic FS were compared between the two groups. Predictive risk factors for such reoperations were determined using multivariate logistic regression and receiver operating characteristics analyses. Preoperatively, 118 patients (56.7%) had asymptomatic FS. Of those, 18 patients (15.3%) underwent reoperation for delayed-onset symptomatic FS at a mean of 1.9 years after the initial surgery. Posterior slip in neutral position and posterior extension-neutral translation were significant risk factors for reoperation due to FS. The optimal cutoff values of posterior slip in neutral position and posterior extension-neutral translation for predicting the occurrence of such reoperations were both 1 mm; 66.7% of patients who met both of these cutoff values had undergone reoperation. This study demonstrated that 15.3% of patients with preoperative asymptomatic FS underwent reoperation for delayed-onset symptomatic FS at the index levels at a mean of 1.9 years after central decompression, and preoperative retrolisthesis was a predictive risk factor for such a reoperation. These findings are valuable for establishing standards of appropriate treatment strategies in patients with lumbar central canal stenosis with asymptomatic FS. Copyright © 2017 Elsevier Inc. All rights reserved.

Intronic splicing mutations in PTCH1 cause Gorlin syndrome.

PubMed

Bholah, Zaynab; Smith, Miriam J; Byers, Helen J; Miles, Emma K; Evans, D Gareth; Newman, William G

2014-09-01

Gorlin syndrome is an autosomal dominant disorder characterized by multiple early-onset basal cell carcinoma, odontogenic keratocysts and skeletal abnormalities. It is caused by heterozygous mutations in the tumour suppressor PTCH1. Routine clinical genetic testing, by Sanger sequencing and multiplex ligation-dependent probe amplification (MLPA) to confirm a clinical diagnosis of Gorlin syndrome, identifies a mutation in 60-90 % of cases. We undertook RNA analysis on lymphocytes from ten individuals diagnosed with Gorlin syndrome, but without known PTCH1 mutations by exonic sequencing or MLPA. Two altered PTCH1 transcripts were identified. Genomic DNA sequence analysis identified an intron 7 mutation c.1068-10T>A, which created a strong cryptic splice acceptor site, leading to an intronic insertion of eight bases; this is predicted to create a frameshift p.(His358Alafs*12). Secondly, a deep intronic mutation c.2561-2057A>G caused an inframe insertion of 78 intronic bases in the cDNA transcript, leading to a premature stop codon p.(Gly854fs*3). The mutations are predicted to cause loss of function of PTCH1, consistent with its tumour suppressor function. The findings indicate the importance of RNA analysis to detect intronic mutations in PTCH1 not identified by routine screening techniques.

Carbon nanorings with inserted acenes: Breaking symmetry in excited state dynamics

DOE PAGES

Franklin-Mergarejo, R.; Alvarez, D. Ondarse; Tretiak, S.; ...

2016-08-10

Conjugated cycloparaphenylene rings have unique electronic properties being the smallest segments of carbon nanotubes. Their conjugated backbones support delocalized electronic excitations, which dynamics is strongly influenced by cyclic geometry. Here we present a comparative theoretical study of the electronic and vibrational energy relaxation and redistribution in photoexcited cycloparaphenylene carbon nanorings with inserted naphthalene, anthracene, and tetracene units using non-adiabatic excited-state molecular dynamics simulations. Calculated excited state structures reflect modifications of optical selection rules and appearance of low-energy electronic states localized on the acenes due to gradual departure from a perfect circular symmetry. After photoexcitation, an ultrafast electronic energy relaxation tomore » the lowest excited state is observed on the time scale of hundreds of femtoseconds in all molecules studied. Concomitantly, the efficiency of the exciton trapping in the acene raises when moving from naphthalene to anthracene and to tetracene, being negligible in naphthalene, and ~60% and 70% in anthracene and tetracene within the first 500 fs after photoexcitation. Observed photoinduced dynamics is further analyzed in details using induced molecular distortions, delocatization properties of participating electronic states and non-adiabatic coupling strengths. Lastly, our results provide a number of insights into design of cyclic molecular systems for electronic and light-harvesting applications.« less

Expression of the proteoglycan syndecan-4 and the mechanism by which it mediates stress fiber formation in folliculostellate cells in the rat anterior pituitary gland.

PubMed

Horiguchi, Kotaro; Kouki, Tom; Fujiwara, Ken; Tsukada, Takehiro; Ly, Floren; Kikuchi, Motoshi; Yashiro, Takashi

2012-08-01

Folliculostellate (FS) cells in the anterior pituitary gland appear to have multifunctional properties. FS cells connect to each other at gap junctions and thereby form a histological and functional network. We have performed a series of studies on network formation in FS cells and recently reported that FS cells markedly prolong their cytoplasmic processes and form numerous interconnections with neighboring FS cells in the presence of laminin, an extracellular matrix (ECM) component of the basement membrane. In this study, we investigated the mechanism of this extension of FS cell cytoplasmic processes under the influence of laminin and found that laminin promoted stress fiber formation within FS cells. Next, we noted that formation of stress fibers in FS cells was mediated by syndecan-4, a transmembrane proteoglycan that binds ECM and soluble factors via their extracellular glycosaminoglycan chain. We then observed that expressions of syndecan-4 and α-actinin (a microfilament bundling protein that cross-links actin stress fibers in FS cells) were upregulated by laminin. Using specific siRNA of syndecan-4, actin polymerization of FS cells was inhibited. Our findings suggest that FS cells received a signal from laminin-syndecan-4 interaction, which resulted in morphological changes, and that the formation of a morphological and functional network in FS cells was transduced by a syndecan-4-dependent mechanism in the presence of ECM.

Individual Diet Modeling Shows How to Balance the Diet of French Adults with or without Excessive Free Sugar Intakes.

PubMed

Lluch, Anne; Maillot, Matthieu; Gazan, Rozenn; Vieux, Florent; Delaere, Fabien; Vaudaine, Sarah; Darmon, Nicole

2017-02-20

Dietary changes needed to achieve nutritional adequacy for 33 nutrients were determined for 1719 adults from a representative French national dietary survey. For each individual, an iso-energy nutritionally adequate diet was generated using diet modeling, staying as close as possible to the observed diet. The French food composition table was completed with free sugar (FS) content. Results were analyzed separately for individuals with FS intakes in their observed diets ≤10% or >10% of their energy intake (named below FS-ACCEPTABLE and FS-EXCESS, respectively). The FS-EXCESS group represented 41% of the total population (average energy intake of 14.2% from FS). Compared with FS-ACCEPTABLE individuals, FS-EXCESS individuals had diets of lower nutritional quality and consumed more energy (2192 vs. 2123 kcal/day), particularly during snacking occasions (258 vs. 131 kcal/day) (all p -values < 0.01). In order to meet nutritional targets, for both FS-ACCEPTABLE and FS-EXCESS individuals, the main dietary changes in optimized diets were significant increases in fresh fruits, starchy foods, water, hot beverages and plain yogurts; and significant decreases in mixed dishes/sandwiches, meat/eggs/fish and cheese. For FS-EXCESS individuals only, the optimization process significantly increased vegetables and significantly decreased sugar-sweetened beverages, sweet products and fruit juices. The diets of French adults with excessive intakes of FS are of lower nutritional quality, but can be optimized via specific dietary changes.

Individual Diet Modeling Shows How to Balance the Diet of French Adults with or without Excessive Free Sugar Intakes

PubMed Central

Lluch, Anne; Maillot, Matthieu; Gazan, Rozenn; Vieux, Florent; Delaere, Fabien; Vaudaine, Sarah; Darmon, Nicole

2017-01-01

Dietary changes needed to achieve nutritional adequacy for 33 nutrients were determined for 1719 adults from a representative French national dietary survey. For each individual, an iso-energy nutritionally adequate diet was generated using diet modeling, staying as close as possible to the observed diet. The French food composition table was completed with free sugar (FS) content. Results were analyzed separately for individuals with FS intakes in their observed diets ≤10% or >10% of their energy intake (named below FS-ACCEPTABLE and FS-EXCESS, respectively). The FS-EXCESS group represented 41% of the total population (average energy intake of 14.2% from FS). Compared with FS-ACCEPTABLE individuals, FS-EXCESS individuals had diets of lower nutritional quality and consumed more energy (2192 vs. 2123 kcal/day), particularly during snacking occasions (258 vs. 131 kcal/day) (all p-values < 0.01). In order to meet nutritional targets, for both FS-ACCEPTABLE and FS-EXCESS individuals, the main dietary changes in optimized diets were significant increases in fresh fruits, starchy foods, water, hot beverages and plain yogurts; and significant decreases in mixed dishes/sandwiches, meat/eggs/fish and cheese. For FS-EXCESS individuals only, the optimization process significantly increased vegetables and significantly decreased sugar-sweetened beverages, sweet products and fruit juices. The diets of French adults with excessive intakes of FS are of lower nutritional quality, but can be optimized via specific dietary changes. PMID:28230722

The use of a newspaper insertion to promote DIY testing of vision in India.

PubMed

Murthy, G V; Gupta, S K; Dada, V K; Pant, T D; Savita, C; Sanga, L; Neena, J

2001-08-01

The mass media have the potential to motivate people to participate in self appraisal of their own health status. An innovative communication package was designed to help people to examine vision at home. The impact of publishing the "do it yourself" (DIY) kit in Indian newspapers was evaluated. A pretested bilingual vision testing kit was published in three newspapers. The kit comprised four tumbling Es corresponding to 6/12 line of Snellen's optotypes. Directions on using the kit were enclosed. 3 -7 days after publication of the kit, a telephone survey of newspaper readers was undertaken to evaluate the impact and cost effectiveness. 603 people were contacted over the telephone. 125 (20.73%) subscribed to the newspaper carrying the DIY insertion. 43.2% (54) noticed the insertion of which 88.89% (48) read the enclosed instructions carefully. 58.33% respondents felt sufficiently motivated to contact an ophthalmologist. Graduates had a 3.83 times higher probability of reading the communication insertion compared with others. Differences in relation to other demographic variables were not statistically significant. Newspapers are an excellent medium for communicating self appraisal kits for vision testing. The medium is cost effective and has significant reach in the urban agglomerates of India.

The use of a newspaper insertion to promote DIY testing of vision in India

PubMed Central

Murthy, G; Gupta, S. K.; Dada, V. K.; Pant, T. D.; Savita, C.; Sanga, L.; Neena, J.

2001-01-01

BACKGROUND—The mass media have the potential to motivate people to participate in self appraisal of their own health status. An innovative communication package was designed to help people to examine vision at home. The impact of publishing the "do it yourself" (DIY) kit in Indian newspapers was evaluated.
METHODS—A pretested bilingual vision testing kit was published in three newspapers. The kit comprised four tumbling Es corresponding to 6/12 line of Snellen's optotypes. Directions on using the kit were enclosed. 3 -7 days after publication of the kit, a telephone survey of newspaper readers was undertaken to evaluate the impact and cost effectiveness.
RESULTS—603 people were contacted over the telephone. 125 (20.73%) subscribed to the newspaper carrying the DIY insertion. 43.2% (54) noticed the insertion of which 88.89% (48) read the enclosed instructions carefully. 58.33% respondents felt sufficiently motivated to contact an ophthalmologist. Graduates had a 3.83 times higher probability of reading the communication insertion compared with others. Differences in relation to other demographic variables were not statistically significant.
CONCLUSIONS—Newspapers are an excellent medium for communicating self appraisal kits for vision testing. The medium is cost effective and has significant reach in the urban agglomerates of India.

 PMID:11466254

Laser-induced breakdown spectroscopy using mid-infrared femtosecond pulses

DOE PAGES

Hartig, K. C.; Colgan, J.; Kilcrease, D. P.; ...

2015-07-30

Here, we report on a laser-induced breakdown spectroscopy (LIBS) experiment driven by mid-infrared (2.05-μm) fs pulses, in which time-resolved emission spectra of copper were studied. Ab-initio modeling is consistent with the results of new fs measurements at 2.05 μm and traditional 800-nm fs-LIBS. Ablation by mid-infrared fs pulses results in a plasma with a lower plasma density and temperature compared to fs-LIBS performed at shorter laser wavelength. LIBS driven by mid-infrared fs pulses results in a signal-to-background ratio ~50% greater and a signal-to-noise ratio ~40% lower than fs-LIBS at near-infrared laser wavelength.

Practice of Sealants and Preventive Resin Restorations Among Malaysian Dentists.

PubMed

Chin, Zhe W; Chong, Wai S; Mani, Shani A

2016-01-01

To assess the knowledge, attitude and utilisation regarding fissure sealants (FS) and preventive resin restorations (PRR) among Malaysian dentists. A questionnaire consisting of 35 questions was distributed by mail or an online survey to 425 registered dentists selected according to place of work by stratified random sampling. One hundred fifty-three dentists responded to the survey. A positive attitude towards FS and PRR was noted among most Malaysian dentists. About half of the respondents used FS/PRR occasionally (48.4%), while few (13.7%) applied them routinely. The majority of the dentists agreed that minimally invasive dentistry is important and FS are effective in caries prevention, using them on high caries-risk individuals. Most of the dentists used pumice or paste to clean teeth before placing FS/PRR. A significant number of dentists used a bonding agent prior to placing FS. Although only 57.5% dentists were aware of guidelines for FS use, most dentists agreed that guidelines are important. Although there was a positive attitude towards FS/PRR, few dentists applied them routinely. Some of the steps undertaken for placement of FS and PRR were outdated. Updating local guidelines for dentists to ensure uniform practice of FS and PRR is justified.

Clinical Core Competency Training for NASA Flight Surgeons

NASA Technical Reports Server (NTRS)

Polk, J. D.; Schmid, Josef; Hurst, Victor, IV; Doerr, Harold K.; Doerr, Harold K.

2007-01-01

Introduction: The cohort of NASA flight surgeons (FS) is a very accomplished group with varied clinical backgrounds; however, the NASA Flight Surgeon Office has identified that the extremely demanding schedule of this cohort prevents many of these physicians from practicing clinical medicine on a regular basis. In an effort to improve clinical competency, the NASA FS Office has dedicated one day a week for the FS to receive clinical training. Each week, an FS is assigned to one of five clinical settings, one being medical patient simulation. The Medical Operations Support Team (MOST) was tasked to develop curricula using medical patient simulation that would meet the clinical and operational needs of the NASA FS Office. Methods: The MOST met with the Lead FS and Training Lead FS to identify those core competencies most important to the FS cohort. The MOST presented core competency standards from the American Colleges of Emergency Medicine and Internal Medicine as a basis for developing the training. Results: The MOST identified those clinical areas that could be best demonstrated and taught using medical patient simulation, in particular, using high fidelity human patient simulators. Curricula are currently being developed and additional classes will be implemented to instruct the FS cohort. The curricula will incorporate several environments for instruction, including lab-based and simulated microgravity-based environments. Discussion: The response from the NASA FS cohort to the initial introductory class has been positive. As a result of this effort, the MOST has identified three types of training to meet the clinical needs of the FS Office; clinical core competency training, individual clinical refresher training, and just-in-time training (specific for post-ISS Expedition landings). The MOST is continuing to work with the FS Office to augment the clinical training for the FS cohort, including the integration of Web-based learning.

Immunohistochemistry of connexin 43 throughout anterior pituitary gland in a transgenic rat with green fluorescent protein-expressing folliculo-stellate cells.

PubMed

Horiguchi, Kotaro; Fujiwara, Ken; Kouki, Tom; Kikuchi, Motoshi; Yashiro, Takashi

2008-12-01

Folliculo-stellate (FS) cells in the anterior pituitary gland have been speculated to possess multifunctional properties. Because gap junctions (GJ) have been identified between FS cells, FS cells may be interconnected electrophysiologically by GJ and serve as signal transmission networks to modulate hormone release in the anterior pituitary gland. But whether GJ are localized among FS cells from the pars tuberalis through the pars distalis is unclear. The S100b-GFP transgenic rat has recently been generated, which expresses green fluorescent protein (GFP) specifically in FS cells in the anterior pituitary. This model is expected to be a powerful tool for studies of FS cells. The purpose of the present paper was therefore to examine the localization of GJ on connexin 43 immunohistochemistry throughout the anterior pituitary gland of S100b-GFP rats under confocal laser microscopy. The localization patterns of FS cells was also observed in primary culture of anterior pituitary cells and the question of whether GJ between FS cells are reconstructed in vitro was investigated. In vivo studies showed that GJ were present specifically between FS cells from the pars tuberalis to the pars distalis in the anterior pituitary gland. The appearance of FS cells was distinguished into two types, with localization of GJ differing between types. In vitro, it was observed for the first time that FS cells in primary culture could be categorized into two types. In vivo localization of GJ between FS cells was reconstructed in vitro. These morphological observations are consistent with the hypothesis that FS cells form an electrophysiological network throughout the anterior pituitary for signal transmission.

Prevalence of hypothyroidism in patients with frozen shoulder.

PubMed

Schiefer, Marcio; Teixeira, Patricia F Santos; Fontenelle, Cesar; Carminatti, Tiago; Santos, Daniel A; Righi, Lucas D; Conceição, Flavia Lucia

2017-01-01

Hypothyroidism and frozen shoulder (FS) have been associated, although this relationship remains uncertain. The main objective of this study was to determine the prevalence of hypothyroidism in patients with FS. A case-control study was performed to compare FS patients (cases) with patients who visited an orthopedic service for other clinical conditions (controls). FS was diagnosed according to specific criteria based on anamnesis, physical examination, and shoulder radiographs. A specific questionnaire was applied, and measurements of serum thyroid-stimulating hormone (TSH) and free tetraiodothyronine were performed in all subjects. We evaluated 401 shoulders from 93 FS patients and 151 controls. The prevalence of hypothyroidism diagnosis was significantly higher in the FS group (27.2% vs. 10.7%; P = .001). There was also a tendency for higher prevalence of bilateral FS among patients with elevated TSH levels (P = .09). Mean serum TSH levels were higher in patients with bilateral FS compared with those with unilateral compromise (3.39 vs. 2.28; P = .05) and were higher in patients with severe FS compared with those with mild and moderate FS together (3.15 vs. 2.21; P = .03). Multivariate analysis showed that FS was independently related to a diagnosis of hypothyroidism (odds ratio, 3.1 [1.5-6.4]; P = .002). There was a trend toward independent association between high serum TSH levels and both severe (odds ratio, 3.5 [0.8-14.9]; P = .09) and bilateral (odds ratio, 11.7 [0.9-144.8]; P = .05) compromise. The prevalence of hypothyroidism was significantly higher in FS patients than in controls. The results suggest that higher serum TSH levels are associated with bilateral and severe cases of FS. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Readability of medicinal package leaflets: a systematic review.

PubMed

Pires, Carla; Vigário, Marina; Cavaco, Afonso

2015-01-01

OBJECTIVE To review studies on the readability of package leaflets of medicinal products for human use. METHODS We conducted a systematic literature review between 2008 and 2013 using the keywords "Readability and Package Leaflet" and "Readability and Package Insert" in the academic search engine Biblioteca do Conhecimento Online, comprising different bibliographic resources/databases. The preferred reporting items for systematic reviews and meta-analyses criteria were applied to prepare the draft of the report. Quantitative and qualitative original studies were included. Opinion or review studies not written in English, Portuguese, Italian, French, or Spanish were excluded. RESULTS We identified 202 studies, of which 180 were excluded and 22 were enrolled [two enrolling healthcare professionals, 10 enrolling other type of participants (including patients), three focused on adverse reactions, and 7 descriptive studies]. The package leaflets presented various readability problems, such as complex and difficult to understand texts, small font size, or few illustrations. The main methods to assess the readability of the package leaflet were usability tests or legibility formulae. Limitations with these methods included reduced number of participants; lack of readability formulas specifically validated for specific languages (e.g., Portuguese); and absence of an assessment on patients literacy, health knowledge, cognitive skills, levels of satisfaction, and opinions. CONCLUSIONS Overall, the package leaflets presented various readability problems. In this review, some methodological limitations were identified, including the participation of a limited number of patients and healthcare professionals, the absence of prior assessments of participant literacy, humor or sense of satisfaction, or the predominance of studies not based on role-plays about the use of medicines. These limitations should be avoided in future studies and be considered when interpreting the results.

Humidity data for 9975 shipping packages with cane fiberboard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daugherty, W. L.

The 9975 surveillance program is developing a technical basis to support extending the storage period of 9975 packages in K-Area Complex beyond the currently approved 15 years. A key element of this effort is developing a better understanding of degradation of the fiberboard assembly under storage conditions. This degradation is influenced greatly by the moisture content of the fiberboard, which is not well characterized on an individual package basis. Direct measurements of humidity and fiberboard moisture content have been made on two test packages with cane fiberboard and varying internal heat levels from 0 up to 19W. With an internalmore » heat load, a temperature gradient in the fiberboard assembly leads to varying relative humidity in the air around the fiberboard. However, the absolute humidity tends to remain approximately constant throughout the package. The moisture content of fiberboard varies under the influence of several phenomena. Changes in local fiberboard temperature (from an internal heat load) can cause fiberboard moisture changes through absorption or evaporation. Fiberboard degradation at elevated temperature will produce water as a byproduct. And the moisture level within the package is constantly seeking equilibrium with that of the surrounding room air, which varies on a daily and seasonal basis. One indicator of the moisture condition within a 9975 package might be obtained by measuring the relative humidity in the upper air space, by inserting a humidity probe through a caplug hole. However, the data indicate that for the higher internal heat loads (15 and 19 watts), a large variation in internal moisture conditions produces little or no variation in the air space relative humidity. Therefore, this approach does not appear to be sensitive to fiberboard moisture variations at the higher heat loads which are of most interest to maintaining fiberboard integrity.« less

APPARATUS AND TECHNIC FOR THE ADMINISTRATION OF INTRACAVITARY RADIOACTIVE ISOTOPES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michaud, N.J.; Liegner, L.M.

1961-08-01

The method of administration of radioactive isotopes in the treatment of pleural effusions and ascites associated with cancer will vary according to the therapeutic technic. A procedure with a suitable apparatus that utilizes an economical and sterile disposable package is described. The radioactive isotope, whether colloidal chromic phosphate (P/sup 32/) or colloidal gold (Au/sup 198/), can be obtained in th e exact amount prescribed. The entire apparatus is assembled within a few minutes under sterile conditions. Before the hypodermic needles are inserted into the radioactive isotope vial, the air is removed from the tubing by the flow of saline inmore » each segment. Each section is then clamped. The shielded radioactive isotope is then placed on a table or stand and the rubber seal of the vial is swabbed with alcohol or iodine. The inflow needle is inserted just through the rubber stopper and the outflow needle is inserted to the bottom of the vial. This procedure is carried out without removing the vial from the lead container. (auth)« less

Strategies to improve electrode positioning and safety in cochlear implants.

PubMed

Rebscher, S J; Heilmann, M; Bruszewski, W; Talbot, N H; Snyder, R L; Merzenich, M M

1999-03-01

An injection-molded internal supporting rib has been produced to control the flexibility of silicone rubber encapsulated electrodes designed to electrically stimulate the auditory nerve in human subjects with severe to profound hearing loss. The rib molding dies, and molds for silicone rubber encapsulation of the electrode, were designed and machined using AutoCad and MasterCam software packages in a PC environment. After molding, the prototype plastic ribs were iteratively modified based on observations of the performance of the rib/silicone composite insert in a clear plastic model of the human scala tympani cavity. The rib-based electrodes were reliably inserted farther into these models, required less insertion force and were positioned closer to the target auditory neural elements than currently available cochlear implant electrodes. With further design improvements the injection-molded rib may also function to accurately support metal stimulating contacts and wire leads during assembly to significantly increase the manufacturing efficiency of these devices. This method to reliably control the mechanical properties of miniature implantable devices with multiple electrical leads may be valuable in other areas of biomedical device design.

Respiratory alkalosis in children with febrile seizures.

PubMed

Schuchmann, Sebastian; Hauck, Sarah; Henning, Stephan; Grüters-Kieslich, Annette; Vanhatalo, Sampsa; Schmitz, Dietmar; Kaila, Kai

2011-11-01

Febrile seizures (FS) are the most common type of convulsive events in children. FS are suggested to result from a combination of genetic and environmental factors. However, the pathophysiologic mechanisms underlying FS remain unclear. Using an animal model of experimental FS, it was demonstrated that hyperthermia causes respiratory alkalosis with consequent brain alkalosis and seizures. Here we examine the acid-base status of children who were admitted to the hospital for FS. Children who were admitted because of gastroenteritis (GE), a condition known to promote acidosis, were examined to investigate a possible protective effect of acidosis against FS. We enrolled 433 age-matched children with similar levels of fever from two groups presented to the emergency department. One group was admitted for FS (n = 213) and the other for GE (n = 220). In the FS group, the etiology of fever was respiratory tract infection (74.2%), otitis media (7%), GE (7%), tonsillitis (4.2%), scarlet fever (2.3%) chickenpox (1.4%), urinary tract infection (1.4%), postvaccination reaction (0.9%), or unidentified (1.4%). In all patients, capillary pH and blood Pco(2) were measured immediately on admission to the hospital. Respiratory alkalosis was found in children with FS (pH 7.46 ± 0.04, [mean ± standard deviation] Pco(2) 29.5 ± 5.5 mmHg), whereas a metabolic acidosis was seen in all children admitted for GE (pH 7.31 ± 0.03, Pco(2) 37.7 ± 4.3 mmHg; p < 0.001 for both parameters). No FS were observed in the latter group. A subgroup (n = 15; 7%) of the patients with FS had GE and, notably, their blood pH was more alkaline (pH 7.44 ± 0.04) than in the GE-admitted group. During the enrollment period, eight of the patients were admitted on separate occasions because of FS or GE. Consistent with the view that generation of FS requires a genetic susceptibility in addition to acute seizure triggering factors, each of these patients had an alkalotic blood pH when admitted because of FS, whereas they had an acidotic pH (and no FS) when admitted because of GE (pH 7.47 ± 0.05 vs. pH 7.33 ± 0.03, p < 0.005). The results show that FS are associated with a systemic respiratory alkalosis, irrespective of the severity of the underlying infection as indicated by the level of fever. The lack of FS in GE patients is attributable to low pH, which also explains the fact that children with a susceptibility to FS do not have seizures when they have GE-induced fever that is associated with acidosis. The present demonstration of a close link between FS and respiratory alkalosis may pave the way for further clinical studies and attempts to design novel therapies for the treatment of FS by controlling the systemic acid-base status. Wiley Periodicals, Inc. © 2011 International League Against Epilepsy.

Lactic acid bacterium and yeast microbiotas of sixteen French traditional sourdoughs.

PubMed

Lhomme, Emilie; Lattanzi, Anna; Dousset, Xavier; Minervini, Fabio; De Angelis, Maria; Lacaze, Guylaine; Onno, Bernard; Gobbetti, Marco

2015-12-23

Sixteen sourdoughs (FS1-FS16) used for the manufacture of traditional French breads were characterized by strongly acid conditions (median value of pH 3.5). The concentration of free amino acids (FAA) was highly variable, due to different proteolytic activity of flour used for back slopping and of dominant microorganisms. Median value of cell density of lactic acid bacteria (LAB) was 9.2 log CFU/g. The ratio between LAB and yeasts ranged from 10,000:1 to 10:1. According to the culture-dependent method and 16S metagenetics, Lactobacillus sanfranciscensis was the dominant species in French sourdoughs. FS5 and FS15, propagated according to protocols including one back slopping step at 14 °C, were the only exceptions. High positive correlations were found between L. sanfranciscensis, temperature of back slopping and FAA. The results of this study highlighted the broad adaptability of L. sanfranciscensis to very acid sourdough. Besides species frequently encountered (e.g., Lactobacillus parabrevis/Lactobacillus hammesii, Lactobacillus plantarum and Leuconostoc mesenteroides), first Lactobacillus xiangfangensis (FS5) and Lactobacillus diolivorans (FS15) were found in sourdough. As determined by RAPD-PCR analyses, the sourdough samples showed a different number of strains, ranging from 5 (FS9, FS11 and FS15) to 12 (FS1 and FS13), meaning a highly variable bacterial diversity. Cluster analysis showed that different sourdoughs, especially when propagated in the same bakery, may harbor similar strains. Except for L. plantarum (FS5) and Ln. mesenteroides (FS3), all the dominant species were detected by both 16S metagenetics and culture-dependent method. Yeast diversity was lower than LAB. Except for FS4 (solely dominated by Kazachstania servazzii), yeast microbiota of French sourdoughs was dominated by Saccharomyces cerevisiae. Strains isolated in this study could be a useful base for developing new basic researches on physiology, metabolism, and intraspecific diversity of L. sanfranciscensis, as well as for standardizing the quality of traditional French breads. Copyright © 2015 Elsevier B.V. All rights reserved.

A Markov modelled pharmacoeconomic analysis of bimatoprost 0.03% in the treatment of glaucoma as an alternative to filtration surgery in Italy.

PubMed

Christensen, Torsten Lundgaard; Poulsen, Peter Bo; Holmstrom, Stefan; Walt, John G; Vetrugno, Michele

2005-11-01

Glaucoma is generally managed by decreasing the intraocular pressure (IOP) to a level believed to prevent further damage to the optic disc and loss of visual field. This may be achieved medically or surgically. The objective of this pharmacoeconomic analysis was to investigate the 4-year costs of bimatoprost 0.03% (Lumigan) eye drops as an alternative to filtration surgery (FS) for glaucoma patients on maximum tolerable medical therapy (MTMT). A Markov model was designed using effectiveness and resource use data from a randomized clinical trial and expert statements (Delphi panel). The RCT covered 83 patients on MTMT. The Model compared bimatoprost with FS. In the bimatoprost model arm patients began treatment with bimatoprost. If target IOP (-20%) was not reached using medical therapy the patient proceeded with FS. In the FS model arm, FS was performed after the first ophthalmologist visit. Unit costs were obtained from an Italian chart and tariffs review (healthcare sector perspective). The RCT showed that 74.7% of the patients delayed the need for FS by 3 months. The Markov model forecasted that 64.2% of the patients could delay the need for FS by 1 year, and forecasted 34.0% could avoid FS after 4 years. The 4-year cost per patient in the bimatoprost and FS arms was E3438 and E4194, respectively (incremental costs of E755). The major cost drivers for the bimatoprost arm were patients who needed combination therapy or FS if the target IOP was not reached. In the FS arm, the major cost drives were the initial surgery costs and pressure-lowering medications used as add-on therapy after FS. The analysis shows that in a 4-year perspective bimatoprost is cheaper compared to FS. In addition, the postponement of FS associated with bimatoprost may have important implications for waiting list planning.

Correlations between grasp-reflex strengths and serum thyroid-hormone levels depending upon sex and familial sinistrality in human neonates: importance of genetically predetermined cerebral organization.

PubMed

Tan, U

1994-03-01

Relations of grasp-reflex strengths to serum free-thyroid hormone levels were studied in human neonates. In right-dominant (RH) males and females without familial sinistrality (-FS), grasp-reflex strengths from right (R) and left (L) inversely correlated with serum triiodothyronine (T3). In RH, +FS males, grasp-reflex strengths from R and L hands directly correlated with T3 (no correlations in RH, +FS females). There was no significant correlation between grasp reflex and T3 in non-right-handed (NRH), -FS neonates. In NRH +FS neonates, there was a significant negative linear correlation between grasp reflex from left and T3 only in NRH, +FS males. The following correlations were found between grasp reflex and thyroxine (T4): direct relation in RH, +FS males and females; inverse relation in NRH, -FS females only for the right hand; inverse correlations in NRH, +FS females. The R-L grasp reflex directly correlated with T3 in RH, -FS males, and inversely correlated with T3 in RH, -FS females (no significant correlations in others). These results indicated that thyroid hormones may influence cerebral maturation and lateralization differentially according to genetically predetermined cerebral organization. The generalizations of the hormonal effects on, at least, cerebral functioning would be wrong, if the genetically predetermined main features of the brain are neglected.

Training tomorrow's doctors to explain 'medically unexplained' physical symptoms: An examination of UK medical educators' views of barriers and solutions.

PubMed

Joyce, Emmeline; Cowing, Jennifer; Lazarus, Candice; Smith, Charlotte; Zenzuck, Victoria; Peters, Sarah

2018-05-01

Co-occuring physical symptoms, unexplained by organic pathology (known as Functional Syndromes, FS), are common and disabling presentations. However, FS is absent or inconsistently taught within undergraduate medical training. This study investigates the reasons for this and identifies potential solutions to improved implementation. Twenty-eight medical educators from thirteen different UK medical schools participated in semi-structured interviews. Thematic analysis proceeded iteratively, and in parallel with data production. Barriers to implementing FS training are beliefs about the complexity of FS, tutors' negative attitudes towards FS, and FS being perceived as a low priority for the curriculum. In parallel participants recognised FS as ubiquitous within medical practice and erroneously assumed it must be taught by someone. They recommended that students should learn about FS through managed exposure, but only if tutors' negative attitudes and behaviour are also addressed. Negative attitudes towards FS by educators prevents designing and delivering effective education on this common medical presentation. Whilst there is recognition of the need to implement FS training, recommendations are multifaceted. Increased liaison between students, patients and educators is necessary to develop more informed and effective teaching methods for trainee doctors about FS and in order to minimise the impact of the hidden curriculum. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

A comparative study of fissure sealants Helioseal Clear Chroma and Delton FS(+): 3 year results.

PubMed

Kargul, B; Tanboga, I; Gulman, N

2009-12-01

To evaluate the retention rates of a resin based colour changing fissure sealant (Helioseal Clear Chroma; Ivoclar Vivadent AG Schaan, Liechtenstein) compared with a coloured resin based fluoride fissure sealant (Delton FS(+); Dentsply De Trey GmbH,Konstanz,Germany). The fissure sealants (FS) were placed on all 4 caries-free first permanent molars of 31 children aged 6-9 years, using a half mouth experimental design by a paediatric dentist according to the manufacturers' instructions. A total of 121 FS were placed at baseline. Teeth were evaluated at 3 month intervals for 36 months where a preventive program including topical fluoride application was applied. Retention rates for 36 months showed a differences between Delton FS(+) and Helioseal Clear Chroma that were statistically significant (p<0.05). Delton FS(+) had total retention rate of 30.4% for 36 months compared with Helioseal Clear Chroma at 10.8% for the same evaluation period. Although Delton FS(+) showed significantly better results than Helioseal Clear Chroma for the evaluation periods, there were no statistically significant differences between Delton FS(+) (90.7%) and Helioseal Clear Chroma (80.4%) with respect to caries incidence at 36 months(p>0.05). Delton FS(+) showed a better complete retention rate for occlusal FS at one year. Both FS were aesthetically acceptable and easy to see during application and follow-up periods and gave significant protection from occlusal decay.

Recurrence of febrile seizure in Yazd, Iran.

PubMed

Fallah, Razieh; Karbasi, Sedighah Akhavan

2010-01-01

Febrile seizure (FS) is the most common problem in pediatric neurology. The purpose of this study was to determine FS recurrence frequency and to evaluate its risk factors. In a descriptive retrospective study, 139 children with first FS, admitted between March 2004 and August 2005 in Yazd Shaheed Sadoughi Hospital, were followed. Seventy-six boys and 63 girls with a mean age of 2.03 +/- 1.21 years were followed for 25.1 +/- 5.5 months. Thirty-seven percent had FS recurrence, with a mean recurrence time of 6.7 +/- 5.9 months. Sixty-five percent of infants and 30% of children >1 year old had FS recurrence. Sixty-three percent of those with seizure occurring in <1 hour of fever duration had FS recurrence, while only 33% of those with seizure after >1 hour of fever duration had FS recurrence. Seizures in children <1 year old and in <1 hour of fever duration were risk factors for FS recurrence.

Preparation and screening of an arrayed human genomic library generated with the P1 cloning system.

PubMed Central

Shepherd, N S; Pfrogner, B D; Coulby, J N; Ackerman, S L; Vaidyanathan, G; Sauer, R H; Balkenhol, T C; Sternberg, N

1994-01-01

We describe here the construction and initial characterization of a 3-fold coverage genomic library of the human haploid genome that was prepared using the bacteriophage P1 cloning system. The cloned DNA inserts were produced by size fractionation of a Sau3AI partial digest of high molecular weight genomic DNA isolated from primary cells of human foreskin fibroblasts. The inserts were cloned into the pAd10sacBII vector and packaged in vitro into P1 phage. These were used to generate recombinant bacterial clones, each of which was picked robotically from an agar plate into a well of a 96-well microtiter dish, grown overnight, and stored at -70 degrees C. The resulting library, designated DMPC-HFF#1 series A, consists of approximately 130,000-140,000 recombinant clones that were stored in 1500 microtiter dishes. To screen the library, clones were combined in a pooling strategy and specific loci were identified by PCR analysis. On average, the library contains two or three different clones for each locus screened. To date we have identified a total of 17 clones containing the hypoxanthine-guanine phosphoribosyltransferase, human serum albumin-human alpha-fetoprotein, p53, cyclooxygenase I, human apurinic endonuclease, beta-polymerase, and DNA ligase I genes. The cloned inserts average 80 kb in size and range from 70 to 95 kb, with one 49-kb insert and one 62-kb insert. Images PMID:8146166

The Ontology of Vaccine Adverse Events (OVAE) and its usage in representing and analyzing adverse events associated with US-licensed human vaccines.

PubMed

Marcos, Erica; Zhao, Bin; He, Yongqun

2013-11-26

Licensed human vaccines can induce various adverse events (AE) in vaccinated patients. Due to the involvement of the whole immune system and complex immunological reactions after vaccination, it is difficult to identify the relations among vaccines, adverse events, and human populations in different age groups. Many known vaccine adverse events (VAEs) have been recorded in the package inserts of US-licensed commercial vaccine products. To better represent and analyze VAEs, we developed the Ontology of Vaccine Adverse Events (OVAE) as an extension of the Ontology of Adverse Events (OAE) and the Vaccine Ontology (VO). Like OAE and VO, OVAE is aligned with the Basic Formal Ontology (BFO). The commercial vaccines and adverse events in OVAE are imported from VO and OAE, respectively. A new population term 'human vaccinee population' is generated and used to define VAE occurrence. An OVAE design pattern is developed to link vaccine, adverse event, vaccinee population, age range, and VAE occurrence. OVAE has been used to represent and classify the adverse events recorded in package insert documents of commercial vaccines licensed by the USA Food and Drug Administration (FDA). OVAE currently includes over 1,300 terms, including 87 distinct types of VAEs associated with 63 human vaccines licensed in the USA. For each vaccine, occurrence rates for every VAE in different age groups have been logically represented in OVAE. SPARQL scripts were developed to query and analyze the OVAE knowledge base data. To demonstrate the usage of OVAE, the top 10 vaccines accompanying with the highest numbers of VAEs and the top 10 VAEs most frequently observed among vaccines were identified and analyzed. Asserted and inferred ontology hierarchies classify VAEs in different levels of AE groups. Different VAE occurrences in different age groups were also analyzed. The ontology-based data representation and integration using the FDA-approved information from the vaccine package insert documents enables the identification of adverse events from vaccination in relation to predefined parts of the population (age groups) and certain groups of vaccines. The resulting ontology-based VAE knowledge base classifies vaccine-specific VAEs and supports better VAE understanding and future rational AE prevention and treatment.

Guillain-Barré syndrome in a local area in Japan, 2006-2015: an epidemiological and clinical study of 108 patients.

PubMed

Matsui, N; Nodera, H; Kuzume, D; Iwasa, N; Unai, Y; Sakai, W; Miyazaki, Y; Yamazaki, H; Osaki, Y; Mori, A; Furukawa, T; Tsukamoto-Miyashiro, A; Shimatani, Y; Yamasaki, M; Izumi, Y; Kusunoki, S; Arisawa, K; Kaji, R

2018-05-01

Many epidemiological studies of Guillain-Barré syndrome (GBS) and Fisher syndrome (FS) have been conducted in Europe and America. In contrast, epidemiological studies are rare in Asia where the GBS subtypes differ from those in Western countries. This study was undertaken to clarify the incidence of GBS and FS in a local area in Japan as well as their seasonal trends. Seventy-one GBS and 37 FS patients were recorded from 2006 to 2015 in an area of approximately 1.5 million inhabitants in Japan. The incidence, seasonal trends and clinical features of GBS and FS were examined. The incidence rate of GBS was 0.42 cases per 100 000 person-years and that of FS was 0.22 cases per 100 000 person-years. The incidence of GBS increased with age and FS affected predominantly patients aged from 45 to 64 years old. There was some seasonal clustering of acute motor axonal neuropathy (AMAN) and FS in spring and summer, but it was not significant. AMAN and FS patients had a high frequency of preceding infection (AMAN, 68% gastrointestinal infection; FS, 65% upper respiratory infection). Antecedent respiratory infection was significantly associated with FS as an outcome. Serum antibodies to ganglioside GM1 were detected in 71% of AMAN patients and antibodies to GQ1b were detected in 81% of FS patients. Our study offers evidence of a lower incidence of GBS and a higher incidence of FS in a local area in Japan than in Western countries. © 2018 EAN.

Femtosecond laser assisted photo-transfection and differentiation of mouse embryonic stem cells

NASA Astrophysics Data System (ADS)

Thobakgale, Lebogang; Manoto, Sello; Ombinda Lemboumba, Satuurnin; Maaza, Malik; Mthunzi-Kufa, Patience

2018-02-01

In tissue engineering research, stem cells have been used as starting material in the synthesis of mammalian cells for the treatment of various cell based diseases. This is done by manipulating the DNA content of the cells to induce a specific effect such as increased proliferation or developing a new cell type through the process of differentiation. Such controlled gene expression of stem cells is achieved by the method of transfection, where exogenous plasmid deoxyribonucleic acid (pDNA) is inserted into a stem cell using chemical, viral or physical methods. In this research, we used femtosecond (fs) laser pulses from a home-build microscope system to perforate the cellular membrane and allow entry of selected pDNA to alter the behaviour of mouse embryonic stem cells (mESCs). In one set of experiments, we induce fluorescence on mESCs using green fluorescence protein plasmid (pGFP) while in other tests; differentiation of mESCs into endoderm cells is performed using Sox-17 plasmid DNA (pSox-17). Primitive endoderm formation was thereafter confirmed using polymerase chain reactions (PCR) and the Sox-17 primer. Cell viability studies using adenosine triphosphate were also conducted. From the data, it was concluded that the photo-transfection method is biocompatible since it was able to induce fluorescence in mESCs. Secondly, it was confirmed that Sox-17 was photo-transfected successfully using 6 μW laser power, 128 fs pulses and 1kHz pulse repetition rate.

Missense variants in plakophilin-2 in arrhythmogenic right ventricular cardiomyopathy patients--disease-causing or innocent bystanders?

PubMed

Christensen, Alex Hørby; Benn, Marianne; Tybjaerg-Hansen, Anne; Haunso, Stig; Svendsen, Jesper Hastrup

2010-01-01

Mutations in genes encoding desmosomal proteins have been linked to arrhythmogenic right ventricular cardiomyopathy/dysplasia (ARVC/D). We hypothesized that a Scandinavian ARVC/D population would have a different spectrum of plakophilin-2 (PKP2) mutations and that some of the reported missense mutations may not be pathogenic. We screened 53 unrelated patients fulfilling Task Force criteria for ARVC/D for mutations in PKP2 by direct sequencing. Seven different mutations were identified: two insertion/deletions (E329fsX352, P401fsX406), 1 splice site (2146-2A>T), 1 non-sense (R79X) and 4 missense mutations (Q62K in 2 patients, G489R, G673V) of undeterminable pathogeneity. None of these mutations was present in 650 controls. Five of the mutations were novel. Seven patients carried reported missense mutations (D26N, S140F, V587I); however, these mutations were identified in our healthy controls, although at a lower frequency. Evaluation of all reported missense mutations in PKP2 showed unclear pathogeneity of several reported mutations. Fifteen percent of Danish ARVC/D patients carried PKP2 mutations. Our finding of reported disease-causing mutations at a low frequency among healthy controls suggests that these variants are disease modifying but not directly disease causing. We recommend conservative interpretation of missense variants in PKP2, functional characterization and large-scale sequencing to clarify normal variation in the gene.

Strain gradient drives shear banding in metallic glasses

NASA Astrophysics Data System (ADS)

Tian, Zhi-Li; Wang, Yun-Jiang; Chen, Yan; Dai, Lan-Hong

2017-09-01

Shear banding is a nucleation-controlled process in metallic glasses (MGs) involving multiple temporal-spatial scales, which hinders a concrete understanding of its structural origin down to the atomic scale. Here, inspired by the morphology of composite materials, we propose a different perspective of MGs as a hard particle-reinforced material based on atomic-scale structural heterogeneity. The local stable structures indicated by a high level of local fivefold symmetry (L5FS) act as hard "particles" which are embedded in the relatively soft matrix. We demonstrate this concept by performing atomistic simulations of shear banding in CuZr MG. A shear band is prone to form in a sample with a high degree of L5FS which is slowly quenched from the liquid. An atomic-scale analysis on strain and the structural evolution reveals that it is the strain gradient effect that has originated from structural heterogeneity that facilitates shear transformation zones (STZs) to mature shear bands. An artificial composite model with a high degree of strain gradient, generated by inserting hard MG strips into a soft MG matrix, demonstrates a great propensity for shear banding. It therefore confirms the critical role strain gradient plays in shear banding. The strain gradient effect on shear banding is further quantified with a continuum model and a mechanical instability analysis. These physical insights might highlight the strain gradient as the hidden driving force in transforming STZs into shear bands in MGs.

76 FR 77477 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

... Receipt to collect information. Need and Use of the Information: Using forms FS-2400-1/BLM-5450-24, FS-2400-4 and FS-2400-8, FS and BLM will collect the name, address and tax identification number from...

Agreement Between 35 Published Frailty Scores in the General Population

PubMed Central

Aguayo, Gloria A.; Donneau, Anne-Françoise; Vaillant, Michel T.; Schritz, Anna; Franco, Oscar H.; Stranges, Saverio; Malisoux, Laurent; Guillaume, Michèle; Witte, Daniel R.

2017-01-01

Abstract In elderly populations, frailty is associated with higher mortality risk. Although many frailty scores (FS) have been proposed, no single score is considered the gold standard. We aimed to evaluate the agreement between a wide range of FS in the English Longitudinal Study of Ageing (ELSA). Through a literature search, we identified 35 FS that could be calculated in ELSA wave 2 (2004–2005). We examined agreement between each frailty score and the mean of 35 FS, using a modified Bland-Altman model and Cohen's kappa (κ). Missing data were imputed. Data from 5,377 participants (ages ≥60 years) were analyzed (44.7% men, 55.3% women). FS showed widely differing degrees of agreement with the mean of all scores and between each pair of scores. Frailty classification also showed a very wide range of agreement (Cohen's κ = 0.10–0.83). Agreement was highest among “accumulation of deficits”-type FS, while accuracy was highest for multidimensional FS. There is marked heterogeneity in the degree to which various FS estimate frailty and in the identification of particular individuals as frail. Different FS are based on different concepts of frailty, and most pairs cannot be assumed to be interchangeable. Research results based on different FS cannot be compared or pooled. PMID:28633404

Prolonged financial stress predicts subsequent obesity: results from a prospective study of an Australian national sample.

PubMed

Siahpush, Mohammad; Huang, Terry T-K; Sikora, Asia; Tibbits, Melissa; Shaikh, Raees A; Singh, Gopal K

2014-02-01

The aim of this research was to assess the association of prolonged financial stress (FS) with subsequent obesity. Data were from Waves 8 (2008), 9 (2009), and 10 (2010) of Household Income and Labor Dynamics in Australia (HILDA) survey. The outcome was obesity measured in 2010. Prolonged FS was defined as having experienced FS in both 2008 and 2009. FS was measured in each year using seven questionnaire items. Analyses adjusted for health, physical activity, income, education, baseline obesity, and other covariates. Prolonged FS was a strong predictor of subsequent obesity. The adjusted risk of being obese in 2010 were 20% higher (RR: 1.20; 95% CI: 1.10-1.30) among individuals who experienced FS in both 2008 and 2009 than those who did not experience FS in either year. The association of FS with obesity was independent of income and constant across income categories. Obesity prevention research should pay more attention to FS as an important dimension of economic deprivation, a concept that is distinct from common indicators of socioeconomic status such as income. Future research can examine the effect of financial education and counseling programs that help individuals with such skills as money management, budgeting, and saving on a reduction in FS and obesity. Copyright © 2013 The Obesity Society.

Detection of drugs in the urine of body-packers.

PubMed

Gherardi, R K; Baud, F J; Leporc, P; Marc, B; Dupeyron, J P; Diamant-Berger, O

1988-05-14

The presence of opiates and benzoylecgonine, the major metabolite of cocaine, in the urine was detected by means of enzyme immunoassay in a series of 120 smugglers who had either ingested or inserted into their rectum cocaine or heroin packaged for transportation. There was a striking relation between the presence of drugs in the urine and swallowing of drug-filled bundles (cocaine 49 of 50 cases, heroin 9 of 10). The proportion of positive results was also high in cases of rectal insertion (cocaine 2 of 2, heroin 35 of 58). In 30 cases of cocaine-packet ingestion, serial measurements showed that the accuracy of the test progressively decreased with respect to the detection of residual packets in the body. Drug detection in the urine of suspected body-packers seems to be a useful test, positive results justifying subsequent radiological investigations.

Construction and production of oncotropic vectors, derived from MVM(p), that share reduced sequence homology with helper plasmids.

PubMed

Clément, Nathalie; Velu, Thierry; Brandenburger, Annick

2002-09-01

The production of currently available vectors derived from autonomous parvoviruses requires the expression of capsid proteins in trans, from helper sequences. Cotransfection of a helper plasmid always generates significant amounts of replication-competent virus (RCV) that can be reduced by the integration of helper sequences into a packaging cell line. Although stocks of minute virus of mice (MVM)-based vectors with no detectable RCV could be produced by transfection into packaging cells; the latter appear after one or two rounds of replication, precluding further amplification of the vector stock. Indeed, once RCVs become detectable, they are efficiently amplified and rapidly take over the culture. Theoretically RCV-free vector stocks could be produced if all homology between vector and helper DNA is eliminated, thus preventing homologous recombination. We constructed new vectors based on the structure of spontaneously occurring defective particles of MVM. Based on published observations related to the size of vectors and the sequence of the viral origin of replication, these vectors were modified by the insertion of foreign DNA sequences downstream of the transgene and by the introduction of a consensus NS-1 nick site near the origin of replication to optimize their production. In one of the vectors the inserted fragment of mouse genomic DNA had a synergistic effect with the modified origin of replication in increasing vector production.

Evaluation of package inserts of Ayurveda drug formulations from Mumbai city.

PubMed

Shirolkar, Sudatta; Tripathi, Raakhi K; Potey, Anirudha V

2015-01-01

Package insert (PI) is a vital document accompanying a prescribed medication to provide information to the prescriber and end-user at a glance. Studies regarding PIs of Ayurvedic medicines in accordance with standard guidelines are lacking. Present study was undertaken to evaluate PI of Ayurveda drugs. PIs of Ayurveda drugs were obtained from five randomly selected Ayurveda medical shops located in three main zones of Mumbai. From each medical shop, a range of 15-20 PI was planned to be collected for different formulations. It was decided to collect a minimum fifty PIs/group for equitable distribution of various formulations in period of January-June2013. Checklist was prepared, and content validity was achieved. Final validated checklist contained a total of 13 items, and the presence or absence of information pertaining to these items on the PI was evaluated. Any other additional information present on PI was also noted. Each item was analyzed and expressed as percentages. The information on 258 PIs included: Name of ingredients (67%), quantity of ingredients (47.27%), route of administration (86.8%), dosage form (86.8%), indications (18%), dose (18%), contraindications (18%), side effects (9%), shelf life (5.81%), storage conditions (11%), and manufacturers name with contact details (34%). PIs accompanying Ayurveda medicinal products in India are deficient in information required to be furnished by them.

Recommendations for the use of medications with continuous enteral nutrition.

PubMed

Wohlt, Paul D; Zheng, Lan; Gunderson, Shelly; Balzar, Sarah A; Johnson, Benjamin D; Fish, Jeffrey T

2009-08-15

Recommendations for the use of medications with continuous enteral nutrition are provided. A literature review was conducted to identify primary literature reporting medication interactions with continuous enteral nutrition. For medications without supporting literature, manufacturers were contacted for information. Package inserts for specific medications were also investigated for any information to help guide recommendations. If no specific recommendations were made by the pharmaceutical manufacturer or the package insert concerning administration of products with continuous enteral nutrition, a tertiary database was consulted. Recommendations were generated by a consensus of clinicians for those medications that lacked specific recommendations in the primary literature or from the pharmaceutical manufacturer. Documentation of medication interactions with continuous enteral nutrition and food was then collated along with specific recommendations on how to administer the medication with regard to continuous enteral nutrition. Recommendations were classified as strong (grade 1) or weak (grade 2). The quality of evidence was classified as high (grade A), moderate (grade B), or low (grade C). Forty-six medications commonly given to hospitalized patients were evaluated. Twenty-four medications had recommendations based on available data, and the remaining 22 medications had recommendations based on a consensus of clinicians. There was a lack of published data regarding drug-nutrient interactions for a majority of the drugs commonly administered to patients receiving continuous enteral nutrition. Clinicians should recognize potential drug-nutrient interactions and use available evidence to optimize patients' drug therapy.

Limitation of intraoperative frozen section during thyroid surgery.

PubMed

Estebe, Sandrine; Montenat, Cecile; Tremoureux, Adrien; Rousseau, Chloé; Bouilloud, François; Jegoux, Franck

2017-03-01

Retrospective analysis on 312 patients, operated for thyroid nodules between 2014 and 2015, was conducted to evaluate the impact of frozen section analysis on the strategy of thyroid nodule surgery. One hundred and ninety-three patients were included. They all underwent preoperative US, fine needle aspiration cytology (FNAC), per operative frozen section (FS) and post operative definitive pathological analysis. Se, Sp, VPP and VPN of FNAC and FS were calculated and compared (McNemar's test). Multivariate analysis was performed to identify independent factor of good results. Se of FS and FNAC were, respectively, 86.1 and 81% with significant superiority of FS (p = .0352). Sp of FS and FNAC were, respectively, 100 and 72% with significant superiority of FS (p = .0156). A strategy based only on FNAC would have led to a 3.6% rate of unnecessary total thyroidectomy vs. 0% using FS. Overall rate of second procedure after lobectomy would have been significantly greater 28.9% without (28.9%) than with (10.3%) FS (p = .018). Overall rate of undone one-stage central neck dissection concurrent to total thyroidectomy for MNG would not have been significantly different without (9.4%) and with (2.1%) FS (.058). FNAC alone is unable to determine the extent of thyroid nodule surgery whatever the Bethesda subtype may be. FS significantly decreases the risk of two-stage procedure. For one-stage total thyroidectomy for MNG, the gain with FS is scarce.

78 FR 1832 - Nez Perce-Clearwater National Forests; Id; Crooked River Valley Rehabilitation Project

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-09

... the thirty-fourth through thirty-sixth lines, `` http://www.fs.fed.usinepa/fs-usda-pop.php/?project=40648 '' should read `` http://www.fs.fed.us/nepa/fs-usda-pop.php/?project=40648 ''. [FR Doc. C1-2012...

Magnetic thermometry in the aseptic processing of foods containing particulates (abstract)

NASA Astrophysics Data System (ADS)

Ghiron, Kenneth; Litchfield, Bruce

1997-04-01

Aseptic processing of foods has many advantages over canning, including higher efficiency, lighter packaging, better taste, and higher nutritional value. Aseptic processing is different from canning where the food and container are sterilized together. Instead, a thin stream of food is heated and the packaging is independently sterilized before the food is placed in the package. However, no aseptic processes have been successfully filed with the FDA for foods containing sizable solid particles because of uncertainties in the thermal sterilization of the particles (e.g., soup). We have demonstrated that by inserting small paramagnetic particles in the interior of the simulated and real food particles, the local temperature can be measured. With this information, any questions about the adequate sterilization of the particles can be resolved. The measurements were done by directing the food stream through a magnetic field and sensing the voltages induced in a pickup coil by the motion of the magnetized particles. Details of the equipment design and data analysis will be discussed along with an introduction to the aseptic processing of foods.

Radial variation in sap velocity as a function of stem diameter and sapwood thickness in yellow-poplar trees.

PubMed

Wullschleger, Stan D.; King, Anthony W.

2000-04-01

Canopy transpiration and forest water use are frequently estimated as the product of sap velocity and cross-sectional sapwood area. Few studies, however, have considered whether radial variation in sap velocity and the proportion of sapwood active in water transport are significant sources of uncertainty in the extrapolation process. Therefore, radial profiles of sap velocity were examined as a function of stem diameter and sapwood thickness for yellow-poplar (Liriodendron tulipifera L.) trees growing on two adjacent watersheds in eastern Tennessee. The compensation heat pulse velocity technique was used to quantify sap velocity at four equal-area depths in 20 trees that ranged in stem diameter from 15 to 69 cm, and in sapwood thickness from 2.1 to 14.8 cm. Sap velocity was highly dependent on the depth of probe insertion into the sapwood. Rates of sap velocity were greatest for probes located in the two outer sapwood annuli (P1 and P2) and lowest for probes in closest proximity to the heartwood (P3 and P4). Relative sap velocities averaged 0.98 at P1, 0.66 at P2, 0.41 at P3 and 0.35 at P4. Tree-specific sap velocities measured at each of the four probe positions, divided by the maximum sap velocity measured (usually at P1 or P2), indicated that the fraction of sapwood functional in water transport (f(S)) varied between 0.49 and 0.96. There was no relationship between f(S) and sapwood thickness, or between f(S) and stem diameter. The fraction of functional sapwood averaged 0.66 +/- 0.13 for trees on which radial profiles were determined. No significant depth-related differences were observed for sapwood density, which averaged 469 kg m(-3) across all four probe positions. There was, however, a significant decline in sapwood water content between the two outer probe positions (1.04 versus 0.89 kg kg(-1)). This difference was not sufficient to account for the observed radial variation in sap velocity. A Monte-Carlo analysis indicated that the standard error in estimated mean f(S) declined rapidly with increasing sample size. At n = 10, the coefficient of variation in mean f(S) was 7% and at n = 15 it was slightly less than 5%. These observations indicate that radial variation in sap velocity is an important, albeit often overlooked, source of uncertainty in the scaling process. Failure to recognize that not all sapwood is functional in water transport will introduce systematic bias into estimates of both tree and stand water use. Future studies should devise sampling strategies for assessing radial variation in sap velocity and such strategies should be used to identify the magnitude of this variation in a range of non-, diffuse- and ring-porous trees.

Likely effect of adding flexible sigmoidoscopy to the English NHS Bowel Cancer Screening Programme: impact on colorectal cancer cases and deaths

PubMed Central

Geurts, S M E; Massat, N J; Duffy, S W

2015-01-01

Background: From 2013, once-only flexible sigmoidoscopy (FS) at age 55 is being phased into the England National Health Service Bowel Cancer Screening Programme (NHSBCSP), augmenting biennial guaiac faecal occult blood testing (gFOBT) at ages 60–74. Here, we project the impact of this change on colorectal cancer (CRC) cases and deaths prevented in England by mid-2030. Methods: We simulated the life-course of English residents reaching age 55 from 2013 onwards. Model inputs included population numbers, invitation rates and CRC incidence and mortality rates. The impact of gFOBT and FS alone on CRC incidence and mortality were derived from published trials, assuming an uptake of 50% for FS and 57% for gFOBT. For FS plus gFOBT, we assumed the gFOBT effect to be 75% of the gFOBT alone impact. Results: By mid-2030, 8.5 million individuals will have been invited for once-only FS screening. Adding FS to gFOBT screening is estimated to prevent an extra 9627 (−10%) cases and 2207 (−12%) deaths by mid-2030. If FS uptake is 38% or 71%, respectively, an extra 7379 (−8%) or 13 689 (−15%) cases and 1691 (−9%) or 3154 (−17%) deaths will be prevented by mid-2030. Conclusions: Adding once-only FS at age 55 to the NHSBCSP will prevent ∼10 000 CRC cases and ∼2000 CRC deaths by mid-2030 if FS uptake is 50%. In 2030, one cancer was estimated to be prevented per 150 FS screening episodes, and one death prevented per 900 FS screening episodes. The actual reductions will depend on the FS invitation schedule and uptake rates. PMID:26110973

77 FR 65169 - Extension of Certain Timber Sale Contracts; Finding of Substantial Overriding Public Interest

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-25

... (SOPI) in extending for up to 1 year certain National Forest System FS-2400-6/6T and FS-2400-13/13T... determined that there is a SOPI for extending up to 1 year certain National Forest System FS-2400-6/6T and FS-2400-13/13T contracts. This will allow any purchaser with a qualifying National Forest System FS-2400-6...

Long-term neurocognitive outcome and auditory event-related potentials after complex febrile seizures in children.

PubMed

Tsai, Min-Lan; Hung, Kun-Long; Tsan, Ying-Ying; Tung, William Tao-Hsin

2015-06-01

Whether prolonged or complex febrile seizures (FS) produce long-term injury to the hippocampus is a critical question concerning the neurocognitive outcome of these seizures. Long-term event-related evoked potential (ERP) recording from the scalp is a noninvasive technique reflecting the sensory and cognitive processes associated with attention tasks. This study aimed to investigate the long-term outcome of neurocognitive and attention functions and evaluated auditory event-related potentials in children who have experienced complex FS in comparison with other types of FS. One hundred and forty-seven children aged more than 6 years who had experienced complex FS, simple single FS, simple recurrent FS, or afebrile seizures (AFS) after FS and age-matched healthy controls were enrolled. Patients were evaluated with Wechsler Intelligence Scale for Children (WISC; Chinese WISC-IV) scores, behavior test scores (Chinese version of Conners' continuous performance test, CPT II V.5), and behavior rating scales. Auditory ERPs were recorded in each patient. Patients who had experienced complex FS exhibited significantly lower full-scale intelligence quotient (FSIQ), perceptual reasoning index, and working memory index scores than did the control group but did not show significant differences in CPT scores, behavior rating scales, or ERP latencies and amplitude compared with the other groups with FS. We found a significant decrease in the FSIQ and four indices of the WISC-IV, higher behavior rating scales, a trend of increased CPT II scores, and significantly delayed P300 latency and reduced P300 amplitude in the patients with AFS after FS. We conclude that there is an effect on cognitive function in children who have experienced complex FS and patients who developed AFS after FS. The results indicated that the WISC-IV is more sensitive in detecting cognitive abnormality than ERP. Cognition impairment, including perceptual reasoning and working memory defects, was identified in patients with prolonged, multiple, or focal FS. These results may have implications for the pathogenesis of complex FS. Further comprehensive psychological evaluation and educational programs are suggested. Copyright © 2015 Elsevier Inc. All rights reserved.

GEMINI-TITAN (GT)-XI - MISC. EXPERIMENTS - MSC

NASA Image and Video Library

1966-03-22

S66-05515 (2 June 1966) --- Gemini-11 Experiment S-9 Nuclear Emulsion. This experiment will be used to study the cosmic radiation incident on Earth's atmosphere, to obtain detailed chemical composition of the heavy primary nuclei and to search for rare particles. Equipment is a rectangular package eight and a half by six by three inches weighing 15 pounds and including the nuclear emulsion film stack, motor to advance the emulsion and a timer to regulate the motor. The package is mounted atop the spacecraft retro adapter section prior to launch, is activated at insertion, and is retrieved by the EVA pilot. The experiment is conducted with the spacecraft in plus or minus 15 degrees of Earth's average magnetic field vector. Sponsors are NASA's Office of Space Science and Applications and the U.S. Naval Research Laboratories. Photo credit: NASA

Autonomous microexplosives subsurface tracing system final report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engler, Bruce Phillip; Nogan, John; Melof, Brian Matthew

The objective of the autonomous micro-explosive subsurface tracing system is to image the location and geometry of hydraulically induced fractures in subsurface petroleum reservoirs. This system is based on the insertion of a swarm of autonomous micro-explosive packages during the fracturing process, with subsequent triggering of the energetic material to create an array of micro-seismic sources that can be detected and analyzed using existing seismic receiver arrays and analysis software. The project included investigations of energetic mixtures, triggering systems, package size and shape, and seismic output. Given the current absence of any technology capable of such high resolution mapping ofmore » subsurface structures, this technology has the potential for major impact on petroleum industry, which spends approximately $1 billion dollar per year on hydraulic fracturing operations in the United States alone.« less

The Core Flight System (cFS) Community: Providing Low Cost Solutions for Small Spacecraft

NASA Technical Reports Server (NTRS)

McComas, David; Wilmot, Jonathan; Cudmore, Alan

2016-01-01

In February 2015 the NASA Goddard Space Flight Center (GSFC) completed the open source release of the entire Core Flight Software (cFS) suite. After the open source release a multi-NASA center Configuration Control Board (CCB) was established that has managed multiple cFS product releases. The cFS was developed and is being maintained in compliance with the NASA Class B software development process requirements and the open source release includes all Class B artifacts. The cFS is currently running on three operational science spacecraft and is being used on multiple spacecraft and instrument development efforts. While the cFS itself is a viable flight software (FSW) solution, we have discovered that the cFS community is a continuous source of innovation and growth that provides products and tools that serve the entire FSW lifecycle and future mission needs. This paper summarizes the current state of the cFS community, the key FSW technologies being pursued, the development/verification tools and opportunities for the small satellite community to become engaged. The cFS is a proven high quality and cost-effective solution for small satellites with constrained budgets.

Novel GABRG2 mutations cause familial febrile seizures

PubMed Central

Boillot, Morgane; Morin-Brureau, Mélanie; Picard, Fabienne; Weckhuysen, Sarah; Lambrecq, Virginie; Minetti, Carlo; Striano, Pasquale; Zara, Federico; Iacomino, Michele; Ishida, Saeko; An-Gourfinkel, Isabelle; Daniau, Mailys; Hardies, Katia; Baulac, Michel; Dulac, Olivier; Leguern, Eric; Nabbout, Rima

2015-01-01

Objective: To identify the genetic cause in a large family with febrile seizures (FS) and temporal lobe epilepsy (TLE) and subsequently search for additional mutations in a cohort of 107 families with FS, with or without epilepsy. Methods: The cohort consisted of 1 large family with FS and TLE, 64 smaller French families recruited through a national French campaign, and 43 Italian families. Molecular analyses consisted of whole-exome sequencing and mutational screening. Results: Exome sequencing revealed a p.Glu402fs*3 mutation in the γ2 subunit of the GABAA receptor gene (GABRG2) in the large family with FS and TLE. Three additional nonsense and frameshift GABRG2 mutations (p.Arg136*, p.Val462fs*33, and p.Pro59fs*12), 1 missense mutation (p.Met199Val), and 1 exonic deletion were subsequently identified in 5 families of the follow-up cohort. Conclusions: We report GABRG2 mutations in 5.6% (6/108) of families with FS, with or without associated epilepsy. This study provides evidence that GABRG2 mutations are linked to the FS phenotype, rather than epilepsy, and that loss-of-function of GABAA receptor γ2 subunit is the probable underlying pathogenic mechanism. PMID:27066572

Novel GABRG2 mutations cause familial febrile seizures.

PubMed

Boillot, Morgane; Morin-Brureau, Mélanie; Picard, Fabienne; Weckhuysen, Sarah; Lambrecq, Virginie; Minetti, Carlo; Striano, Pasquale; Zara, Federico; Iacomino, Michele; Ishida, Saeko; An-Gourfinkel, Isabelle; Daniau, Mailys; Hardies, Katia; Baulac, Michel; Dulac, Olivier; Leguern, Eric; Nabbout, Rima; Baulac, Stéphanie

2015-12-01

To identify the genetic cause in a large family with febrile seizures (FS) and temporal lobe epilepsy (TLE) and subsequently search for additional mutations in a cohort of 107 families with FS, with or without epilepsy. The cohort consisted of 1 large family with FS and TLE, 64 smaller French families recruited through a national French campaign, and 43 Italian families. Molecular analyses consisted of whole-exome sequencing and mutational screening. Exome sequencing revealed a p.Glu402fs*3 mutation in the γ2 subunit of the GABAA receptor gene (GABRG2) in the large family with FS and TLE. Three additional nonsense and frameshift GABRG2 mutations (p.Arg136*, p.Val462fs*33, and p.Pro59fs*12), 1 missense mutation (p.Met199Val), and 1 exonic deletion were subsequently identified in 5 families of the follow-up cohort. We report GABRG2 mutations in 5.6% (6/108) of families with FS, with or without associated epilepsy. This study provides evidence that GABRG2 mutations are linked to the FS phenotype, rather than epilepsy, and that loss-of-function of GABAA receptor γ2 subunit is the probable underlying pathogenic mechanism.

Fabrication and Structural Design of Micro Pressure Sensors for Tire Pressure Measurement Systems (TPMS)

PubMed Central

Tian, Bian; Zhao, Yulong; Jiang, Zhuangde; Zhang, Ling; Liao, Nansheng; Liu, Yuanhao; Meng, Chao

2009-01-01

In this paper we describe the design and testing of a micro piezoresistive pressure sensor for a Tire Pressure Measurement System (TPMS) which has the advantages of a minimized structure, high sensitivity, linearity and accuracy. Through analysis of the stress distribution of the diaphragm using the ANSYS software, a model of the structure was established. The fabrication on a single silicon substrate utilizes the technologies of anisotropic chemical etching and packaging through glass anodic bonding. The performance of this type of piezoresistive sensor, including size, sensitivity, and long-term stability, were investigated. The results indicate that the accuracy is 0.5% FS, therefore this design meets the requirements for a TPMS, and not only has a smaller size and simplicity of preparation, but also has high sensitivity and accuracy. PMID:22573960

The bioaccessibility of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) in cooked plant and animal origin foods.

PubMed

Shen, Haitao; Starr, James; Han, Jianlong; Zhang, Lei; Lu, Dasheng; Guan, Rongfa; Xu, Xiaomin; Wang, Xiaofeng; Li, Jingguang; Li, Weiwei; Zhang, Yanjun; Wu, Yongning

2016-09-01

In this study, we compared the effect of boiling and frying food preparation methods in determining the bioaccessibility of polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) in rice, cabbage, milk powder, eggs, beef, and fresh water fish. We then used these data to calculate a toxic equivalent (TEQ) for risk assessment and compared it to published values that did not account for bioaccessibility. When the foods were prepared by boiling, the mean bioaccessibility (%) in rice (PCBs: 16.5±1.0, PCDD/Fs: 4.9±0.3) and cabbage (PCBs: 4.2±0.9, PCDD/Fs: 1.9±0.7) were lower than in animal origin foods (beef, PCBs: 49.0±3.3, PCDD/Fs: 7.8±0.9; egg, PCBs: 29.7±3.1, PCDD/Fs: 8.6±1.3; fish, PCBs: 26.9±2.5, PCDD/Fs: 7.9±1.3; milk powder, PCBs: 72.3±1.6, PCDD/Fs: 28.4±1.2). When fried in cooking oil, the bioaccessibilities of all analytes in all foods increased, but the increase in plant based foods (rice, PCBs: 3.4×, PCDD/Fs: 3.6×; cabbage, PCBs: 10.3×, PCDD/Fs: 7.9×) was greater than that of animal origin foods (beef, PCBs: 1.6×, PCDD/Fs: 3.4×; egg, PCBs: 2.1×, PCDD/Fs: 1.8×; fish, PCBs: 2.8, PCDD/Fs: 3.2×). Comparison of PCBs/PCDD/Fs bioaccessibility in rice and cabbage showed that bioaccessibility was greater in the low fat, high carbohydrate/protein content food (rice) than in the low carbohydrate/protein, low fat content food (cabbage), regardless of the method used to prepare the food. Adjusting for bioaccessibility reduced the gross estimated daily intake (EDI) of 112pgWHO-TEQ/day, by 88% and 63% respectively for foods prepared by boiling and frying. Our results indicate that: 1) The method used for cooking is an important determinant of PCBs/PCDD/Fs bioaccessibility, especially for plant origin foods, 2) there might be a joint fat, carbohydrate and protein effect that influences the bioaccessibilities of PCBs/PCDD/Fs in foods, and 3) use of bioaccessibility estimates would reduce the uncertainty in TEQ calculations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dietary flaxseed administered post thoracic radiation treatment improves survival and mitigates radiation-induced pneumonopathy in mice

PubMed Central

2011-01-01

Background Flaxseed (FS) is a dietary supplement known for its antioxidant and anti-inflammatory properties. Radiation exposure of lung tissues occurs either when given therapeutically to treat intrathoracic malignancies or incidentally, such as in the case of exposure from inhaled radioisotopes released after the detonation of a radiological dispersion devise (RDD). Such exposure is associated with pulmonary inflammation, oxidative tissue damage and irreversible lung fibrosis. We previously reported that dietary FS prevents pneumonopathy in a rodent model of thoracic X-ray radiation therapy (XRT). However, flaxseed's therapeutic usefulness in mitigating radiation effects post-exposure has never been evaluated. Methods We evaluated the effects of a 10%FS or isocaloric control diet given to mice (C57/BL6) in 2 separate experiments (n = 15-25 mice/group) on 0, 2, 4, 6 weeks post a single dose 13.5 Gy thoracic XRT and compared it to an established radiation-protective diet given preventively, starting at 3 weeks prior to XRT. Lungs were evaluated four months post-XRT for blood oxygenation levels, inflammation and fibrosis. Results Irradiated mice fed a 0%FS diet had a 4-month survival rate of 40% as compared to 70-88% survival in irradiated FS-fed mouse groups. Additionally, all irradiated FS-fed mice had decreased fibrosis compared to those fed 0%FS. Lung OH-Proline content ranged from 96.5 ± 7.1 to 110.2 ± 7.7 μg/ml (Mean ± SEM) in all irradiated FS-fed mouse groups, as compared to 138 ± 10.8 μg/ml for mice on 0%FS. Concomitantly, bronchoalveolar lavage (BAL) protein and weight loss associated with radiation cachexia was significantly decreased in all FS-fed groups. Inflammatory cell influx to lungs also decreased significantly except when FS diet was delayed by 4 and 6 weeks post XRT. All FS-fed mice (irradiated or not), maintained a higher blood oxygenation level as compared to mice on 0%FS. Similarly, multiplex cytokine analysis in the BAL fluid revealed a significant decrease of specific inflammatory cytokines in FS-fed mice. Conclusions Dietary FS given post-XRT mitigates radiation effects by decreasing pulmonary fibrosis, inflammation, cytokine secretion and lung damage while enhancing mouse survival. Dietary supplementation of FS may be a useful adjuvant treatment mitigating adverse effects of radiation in individuals exposed to inhaled radioisotopes or incidental radiation. PMID:21702963

Impacts of using inbred animals in studies for detection of quantitative trait loci.

PubMed

Freyer, G; Vukasinovic, N; Cassell, B

2009-02-01

Effects of utilizing inbred and noninbred family structures in experiments for detection of quantitative trait loci (QTL) were compared in this simulation study. Simulations were based on a general pedigree design originating from 2 unrelated sires. A variance component approach of mapping QTL was applied to simulated data that reflected common family structures from dairy populations. Five different family structures were considered: FS0 without inbreeding, FS1 with an inbred sire from an aunt-nephew mating, FS2 with an inbred sire originating from a half-sib mating, FS3 and FS4 based on FS2 but containing an increased number of offspring of the inbred sire (FS3), and another extremely inbred sire with its final offspring (FS4). Sixty replicates each of the 5 family structures in 2 simulation scenarios each were analyzed to provide a praxis-like situation of QTL analysis. The largest proportion of QTL position estimates within the correct interval of 3 cM, best test statistic profiles and the smallest average bias were obtained from the pedigrees described by FS4 and FS2. The approach does not depend on the kind and number of genetic markers. Inbreeding is not a recommended practice for commercial dairy production because of possible inbreeding depression, but inbred animals and their offspring that already exist could be advantageous for QTL mapping, because of reduced genetic variance in inbred parents.

Corneal epithelial cell biocompatibility to silicone hydrogel and conventional hydrogel contact lens packaging solutions

PubMed Central

Tanti, N.C.; Jones, L.; Sheardown, H.

2010-01-01

Purpose Although all contact lenses (CLs) are applied initially to the eye directly from a packaging solution, little is known about the effects of these solutions on human corneal epithelial cells (HCECs). Due to the porous nature of CL materials, they have the potential to sorb components of the packaging solution during storage, which could then be subsequently released upon insertion of the CL on the eye. The purpose of this study was to investigate the effect of various packaging solutions on HCECs, using an in vitro model. Methods An in vitro assay was developed whereby various silicone hydrogels and conventional, poly-2-hydroxyethylmethacrylate  (polyHEMA)-based lens materials were removed directly from their packaging and then incubated for up to 24 h with HCECs. The effect of the retained and released packaging solution components on HCECs was assessed by measuring cell viability, adhesion phenotype, and apoptosis. Results Incubation of HCECs with CLs stored in borate-buffered packaging solutions resulted in a significant reduction in cell viability. Adherent cells incubated with these CLs also exhibited reduced levels of β1 and α3 integrin. Soaking borate-buffered packaged CLs in PBS before cell incubation resolved viability and integrin expression in all cases, with the exception of galyfilcon A and balafilcon A, from which a 20% reduction in cell viability was still observed. In comparison, CLs stored in phosphate-buffered packaging solutions had cellular viability and expression of integrins similar to control cells (cells incubated in the absence of a lens). When incubated with cells at a 10% concentration in serum-free medium, borate-buffered packaging solutions and borate-containing saline (Unisol 4) significantly reduced cell viability and integrin expression. Neither caspase activation nor annexin V binding was observed on cells following exposure to borate buffer solution. However, a significant decrease in reactive oxygen species was observed at 24 h. These latter results suggest that in vitro exposure to low concentration of borate/boric acid results in cell dysfunction, leading to necrosis rather than apoptosis. Conclusions Borate-buffered packaging solutions were shown to adversely affect the viability and integrin expression of HCECs in vitro. When used in ophthalmic packaging solutions, the antimicrobial properties of borate buffer may be outweighed by its relatively cytotoxic effects on cells. PMID:20169012

Corneal epithelial cell biocompatibility to silicone hydrogel and conventional hydrogel contact lens packaging solutions.

PubMed

Gorbet, M B; Tanti, N C; Jones, L; Sheardown, H

2010-02-19

Although all contact lenses (CLs) are applied initially to the eye directly from a packaging solution, little is known about the effects of these solutions on human corneal epithelial cells (HCECs). Due to the porous nature of CL materials, they have the potential to sorb components of the packaging solution during storage, which could then be subsequently released upon insertion of the CL on the eye. The purpose of this study was to investigate the effect of various packaging solutions on HCECs, using an in vitro model. An in vitro assay was developed whereby various silicone hydrogels and conventional, poly-2-hydroxyethylmethacrylate (polyHEMA)-based lens materials were removed directly from their packaging and then incubated for up to 24 h with HCECs. The effect of the retained and released packaging solution components on HCECs was assessed by measuring cell viability, adhesion phenotype, and apoptosis. Incubation of HCECs with CLs stored in borate-buffered packaging solutions resulted in a significant reduction in cell viability. Adherent cells incubated with these CLs also exhibited reduced levels of beta(1) and alpha(3) integrin. Soaking borate-buffered packaged CLs in PBS before cell incubation resolved viability and integrin expression in all cases, with the exception of galyfilcon A and balafilcon A, from which a 20% reduction in cell viability was still observed. In comparison, CLs stored in phosphate-buffered packaging solutions had cellular viability and expression of integrins similar to control cells (cells incubated in the absence of a lens). When incubated with cells at a 10% concentration in serum-free medium, borate-buffered packaging solutions and borate-containing saline (Unisol 4) significantly reduced cell viability and integrin expression. Neither caspase activation nor annexin V binding was observed on cells following exposure to borate buffer solution. However, a significant decrease in reactive oxygen species was observed at 24 h. These latter results suggest that in vitro exposure to low concentration of borate/boric acid results in cell dysfunction, leading to necrosis rather than apoptosis. Borate-buffered packaging solutions were shown to adversely affect the viability and integrin expression of HCECs in vitro. When used in ophthalmic packaging solutions, the antimicrobial properties of borate buffer may be outweighed by its relatively cytotoxic effects on cells.

Analysis of chirality by femtosecond laser ionization mass spectrometry.

PubMed

Horsch, Philipp; Urbasch, Gunter; Weitzel, Karl-Michael

2012-09-01

Recent progress in the field of chirality analysis employing laser ionization mass spectrometry is reviewed. Emphasis is given to femtosecond (fs) laser ionization work from the author's group. We begin by reviewing fundamental aspects of determining circular dichroism (CD) in fs-laser ionization mass spectrometry (fs-LIMS) discussing an example from the literature (resonant fs-LIMS of 3-methylcyclopentanone). Second, we present new data indicating CD in non-resonant fs-LIMS of propylene oxide. Copyright © 2012 Wiley Periodicals, Inc., A Wiley Company.

Communication: hybrid femtosecond/picosecond rotational coherent anti-Stokes Raman scattering thermometry using a narrowband time-asymmetric probe pulse.

PubMed

Stauffer, Hans U; Miller, Joseph D; Roy, Sukesh; Gord, James R; Meyer, Terrence R

2012-03-21

A narrowband, time-asymmetric probe pulse is introduced into the hybrid femtosecond/picosecond rotational coherent anti-Stokes Raman scattering (fs/ps RCARS) technique to provide accurate and precise single-shot, high-repetition-rate gas-phase thermometric measurements. This narrowband pulse-generated by inserting a Fabry-Pérot étalon into the probe-pulse beam path-enables frequency-domain detection of pure-rotational transitions. The unique time-asymmetric nature of this pulse, in turn, allows for detection of resonant Raman-active rotational transitions free of signal contamination by nonresonant four-wave-mixing processes while still allowing detection at short probe-pulse delays, where collisional dephasing processes are negligible. We demonstrate that this approach provides excellent single-shot thermometric accuracy (<1% error) and precision (~2.5%) in gas-phase environments. © 2012 American Institute of Physics

Software management tools: Lessons learned from use

NASA Technical Reports Server (NTRS)

Reifer, D. J.; Valett, J.; Knight, J.; Wenneson, G.

1985-01-01

Experience in inserting software project planning tools into more than 100 projects producing mission critical software are discussed. The problems the software project manager faces are listed along with methods and tools available to handle them. Experience is reported with the Project Manager's Workstation (PMW) and the SoftCost-R cost estimating package. Finally, the results of a survey, which looked at what could be done in the future to overcome the problems experienced and build a set of truly useful tools, are presented.

Tests of a Semi-Analytical Case 1 and Gelbstoff Case 2 SeaWiFS Algorithm with a Global Data Set

NASA Technical Reports Server (NTRS)

Carder, Kendall L.; Hawes, Steve K.; Lee, Zhongping

1997-01-01

A semi-analytical algorithm was tested with a total of 733 points of either unpackaged or packaged-pigment data, with corresponding algorithm parameters for each data type. The 'unpackaged' type consisted of data sets that were generally consistent with the Case 1 CZCS algorithm and other well calibrated data sets. The 'packaged' type consisted of data sets apparently containing somewhat more packaged pigments, requiring modification of the absorption parameters of the model consistent with the CalCOFI study area. This resulted in two equally divided data sets. A more thorough scrutiny of these and other data sets using a semianalytical model requires improved knowledge of the phytoplankton and gelbstoff of the specific environment studied. Since the semi-analytical algorithm is dependent upon 4 spectral channels including the 412 nm channel, while most other algorithms are not, a means of testing data sets for consistency was sought. A numerical filter was developed to classify data sets into the above classes. The filter uses reflectance ratios, which can be determined from space. The sensitivity of such numerical filters to measurement resulting from atmospheric correction and sensor noise errors requires further study. The semi-analytical algorithm performed superbly on each of the data sets after classification, resulting in RMS1 errors of 0.107 and 0.121, respectively, for the unpackaged and packaged data-set classes, with little bias and slopes near 1.0. In combination, the RMS1 performance was 0.114. While these numbers appear rather sterling, one must bear in mind what mis-classification does to the results. Using an average or compromise parameterization on the modified global data set yielded an RMS1 error of 0.171, while using the unpackaged parameterization on the global evaluation data set yielded an RMS1 error of 0.284. So, without classification, the algorithm performs better globally using the average parameters than it does using the unpackaged parameters. Finally, the effects of even more extreme pigment packaging must be examined in order to improve algorithm performance at high latitudes. Note, however, that the North Sea and Mississippi River plume studies contributed data to the packaged and unpackaged classess, respectively, with little effect on algorithm performance. This suggests that gelbstoff-rich Case 2 waters do not seriously degrade performance of the semi-analytical algorithm.

Gamma frequency SSVEP components differentiate children with febrile seizures from normal controls.

PubMed

Birca, Ala; Carmant, Lionel; Lortie, Anne; Vannasing, Phetsamone; Lassonde, Maryse

2008-11-01

Gamma band electroencephalography (EEG) abnormalities have been reported in patients with epilepsy. We aimed to investigate whether patients with febrile seizures (FS) show abnormalities of the gamma frequency steady-state visual evoked potential (SSVEP) components evoked by intermittent photic stimulation (IPS). We analyzed the magnitude and phase alignment of the 50-100 Hz SSVEP components elicited by IPS from 12 FS patients, 5 siblings of FS patients, and 15 control children between 6 and 36 months of age. Patients with FS showed significantly higher SSVEP magnitude and phase alignment values when compared to both the siblings and control groups. Detected abnormalities could either represent the direct consequence of seizures or indicate a preexisting tendency to hypersynchrony in FS patients. Future prospective studies could assess whether SSVEP abnormalities are associated with complex rather than simple FS, or have a prognostic value for the development of epilepsy following FS.

USAARL NUH-60FS Acoustic Characterization

DTIC Science & Technology

2016-11-01

Performance Division (APPD) previously acoustically characterized the Black Hawk flight simulator (NUH-60FS). Since that characterization, the NUH-60FS...greater than one for higher-level speakers. Black Hawk flight simulator, noise level, third octave band level UNCLAS UNCLAS UNCLAS SAR 52 Loraine St. Onge...Research Laboratory NUH-60FS Black Hawk Flight Simulator

SeaWiFS Technical Report Series. Volume 39; SeaWiFS Calibration Topics

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Barnes, Robert A.; Yeh, Eueng-nan; Eplee, Robert E.

1996-01-01

For Earth-observing satellite instruments, it was standard to consider each instrument band to have a spectral response that is infinitely narrow, i.e., to have a response from a single wavelength. The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) bands, however, have nominal spectral bandwidths of 20 and 40nm. These bandwidths affect the SeaWiFS measurements on orbit. The effects are also linked to the manner in which the instrument was calibrated and to the spectral shape of the radiance that SeaWiFS views. Currently, SeaWiFS is calibrated such that the digital counts from each instrument band are linked to the Earth-exiting radiance at an individual center wavelength. Before launch, SeaWiFS will be recalibrated so that the digital counts from each band will be linked to the Earth-exiting radiance integrated over the spectral response of that band. In this technical memorandum, the effects of the instrument calibration and the source spectral shape on SeaWiFS measurements, including the in-band and out-of-band responses, and the center wavelengths are discussed.

Lifetimes of $sup 55$Co excited levels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neal, G.F.; Chagnon, P.R.

1976-02-01

Gamma-rays deexciting $sup 55$CO levels have been studied in coincidence with deuterons detected in a particle telescope, in the $sup 54$Fe($sup 3$He,d$gamma$)$sup 55$Co reaction. Excitation energies, relative $gamma$-ray intensities, and Doppler-shift attenuations of 12 levels have been measured. Mean lifetimes and transition strengths are reported. The Doppler-shifted line shape of the 2164$Yields$0-keV transition has been analyzed and has been found consistent with the assumption of a single level. Lifetimes of selected levels are: 2164 keV, 125$sup +25$/sub -//sub 2//sub 0/ fs; 3301 keV, 50$sup +20$/sub -// sub 1//sub 5/ fs; 3322 keV, 45$sup +15$/sub -//sub 1//sub 0/ fs; 3641 keV,more » 300$sup +150$/sub -//sub 1//sub 0//sub 0/ fs; 4163 keV, 30$sup +15$/sub -//sub 1// sub 0/ fs; 4714 keV, 300$sup +200$/sub -//sub 1//sub 5//sub 0/ fs; 4719 keV, <30 fs; and 5172 keV, 10$sup +10$/sub -//sub 5/ fs. (AIP)« less

Follistatin does not influence the course of Escherichia coli K1 sepsis in a mouse model.

PubMed

Dieelberg, Catharina; Ribes, Sandra; Michel, Uwe; Redlich, Sandra; Brück, Wolfgang; Nau, Roland; Schütze, Sandra

2012-12-01

Follistatin (FS) is the binding protein of activin A and inhibits its actions. The activin/FS system participates in the fine tuning of the immune response, and concentrations of activin A and FS are elevated in serum of patients with sepsis. Intraperitoneal injection of FS markedly reduced mortality after lipopolysaccharide-induced inflammation in a mouse model. Here, we investigated whether FS also influences the disease course in a mouse model of sepsis induced by intraperitoneal injection of Escherichia coli K1, a gram-negative bacterium frequently causing septic bacterial infections. Intraperitoneal injection of 10 μg/mL FS 30 min before infection did not influence survival, weight, motor performance, or bacterial titers of the infected mice. Thus, we could not confirm the protective effect of FS observed during lipopolysaccharide-induced inflammation in our mouse model of E. coli sepsis. Although it is a promising therapeutic tool in chronic or acute inflammatory conditions not caused by virulent pathogens, FS does not seem to increase the resistance to bacterial infections.

Risk of subsequent attention deficit-hyperactivity disorder in children with febrile seizures.

PubMed

Ku, Yi-Chia; Muo, Chih-Hsin; Ku, Chin-Shein; Chen, Chao-Huei; Lee, Wen-Yuan; Shen, Ein-Yiao; Chang, Yen-Jung; Kao, Chia-Hung

2014-04-01

In this study, we obtained relevant data from a nationwide cohort database to investigate the risk of attention deficit-hyperactivity disorder (ADHD) in children with a history of febrile seizures (FS). We identified 1081 children with FS as the case cohort, and the date of diagnosis was used as an index date. Four controls were matched randomly with each case based on age, sex, urbanisation level, parents' occupation, and index date. We applied Cox's proportional hazards regression to estimate the HR and CI of FS-associated ADHD. After 11 years of follow-up, the incidence of ADHD for the FS and control cohorts is 7.83 and 4.72 per 1000 person-years, respectively. The FS cohort was 1.66 times more at risk of ADHD occurrence (95% CI 1.27 to 2.18) than the control cohort. The risk of developing ADHD increased in conjunction with the frequency of FS-related visits. FS may increase the risk of subsequent ADHD occurrence in children. Children who visited physicians for FS more than twice had a significantly higher cumulative incidence of ADHD.

Numerical investigation of heat transfer and friction factor characteristics in a circular tube fitted with V-cut twisted tape inserts.

PubMed

Salman, Sami D; Kadhum, Abdul Amir H; Takriff, Mohd S; Mohamad, Abu Bakar

2013-01-01

Numerical investigation of the heat transfer and friction factor characteristics of a circular fitted with V-cut twisted tape (VCT) insert with twist ratio (y = 2.93) and different cut depths (w = 0.5, 1, and 1.5 cm) were studied for laminar flow using CFD package (FLUENT-6.3.26). The data obtained from plain tube were verified with the literature correlation to ensure the validation of simulation results. Classical twisted tape (CTT) with different twist ratios (y = 2.93, 3.91, 4.89) were also studied for comparison. The results show that the enhancement of heat transfer rate induced by the classical and V-cut twisted tape inserts increases with the Reynolds number and decreases with twist ratio. The results also revealed that the V-cut twisted tape with twist ratio y = 2.93 and cut depth w = 0.5 cm offered higher heat transfer rate with significant increases in friction factor than other tapes. In addition the results of V-cut twist tape compared with experimental and simulated data of right-left helical tape inserts (RLT), it is found that the V-cut twist tape offered better thermal contact between the surface and the fluid which ultimately leads to a high heat transfer coefficient. Consequently, 107% of maximum heat transfer was obtained by using this configuration.

Numerical Investigation of Heat Transfer and Friction Factor Characteristics in a Circular Tube Fitted with V-Cut Twisted Tape Inserts

PubMed Central

Salman, Sami D.; Kadhum, Abdul Amir H.; Takriff, Mohd S.; Mohamad, Abu Bakar

2013-01-01

Numerical investigation of the heat transfer and friction factor characteristics of a circular fitted with V-cut twisted tape (VCT) insert with twist ratio (y = 2.93) and different cut depths (w = 0.5, 1, and 1.5 cm) were studied for laminar flow using CFD package (FLUENT-6.3.26). The data obtained from plain tube were verified with the literature correlation to ensure the validation of simulation results. Classical twisted tape (CTT) with different twist ratios (y = 2.93, 3.91, 4.89) were also studied for comparison. The results show that the enhancement of heat transfer rate induced by the classical and V-cut twisted tape inserts increases with the Reynolds number and decreases with twist ratio. The results also revealed that the V-cut twisted tape with twist ratio y = 2.93 and cut depth w = 0.5 cm offered higher heat transfer rate with significant increases in friction factor than other tapes. In addition the results of V-cut twist tape compared with experimental and simulated data of right-left helical tape inserts (RLT), it is found that the V-cut twist tape offered better thermal contact between the surface and the fluid which ultimately leads to a high heat transfer coefficient. Consequently, 107% of maximum heat transfer was obtained by using this configuration. PMID:24078795

Chelating capture and magnetic removal of non-magnetic heavy metal substances from soil

PubMed Central

Fan, Liren; Song, Jiqing; Bai, Wenbo; Wang, Shengping; Zeng, Ming; Li, Xiaoming; Zhou, Yang; Li, Haifeng; Lu, Haiwei

2016-01-01

A soil remediation method based on magnetic beneficiation is reported. A new magnetic solid chelator powder, FS@IDA (core-shell Fe3O4@SiO2 nanoparticles coated with iminodiacetic acid chelators), was used as a reactive magnetic carrier to selectively capture non-magnetic heavy metals in soil by chelation and removal by magnetic separation. FS@IDA was prepared via inorganic-organic and organic synthesis reactions that generated chelating groups on the surface of magnetic, multi-core, core-shell Fe3O4@SiO2 (FS) nanoparticles. These reactions used a silane coupling agent and sodium chloroacetate. The results show that FS@IDA could chelate the heavy metal component of Cd, Zn, Pb, Cu and Ni carbonates, lead sulfate and lead chloride in water-insoluble salt systems. The resulting FS@IDA-Cd and FS@IDA-Pb chelates could be magnetically separated, resulting in removal rates of approximately 84.9% and 72.2% for Cd and Pb, respectively. FS@IDA could not remove the residual heavy metals and those bound to organic matter in the soil. FS@IDA did not significantly alter the chemical composition of the soil, and it allowed for fast chelating capture, simple magnetic separation and facilitated heavy metal elution. FS@IDA could also be easily prepared and reprocessed. PMID:26878770

Domestic cooking and food skills: A review.

PubMed

McGowan, Laura; Caraher, Martin; Raats, Monique; Lavelle, Fiona; Hollywood, Lynsey; McDowell, Dawn; Spence, Michelle; McCloat, Amanda; Mooney, Elaine; Dean, Moira

2017-07-24

Domestic cooking skills (CS) and food skills (FS) encompass multiple components, yet there is a lack of consensus on their constituent parts, inter-relatedness, or measurement, leading to limited empirical support for their role in influencing dietary quality. This review assessed the measurement of CS and FS in adults (>16 years); critically examining study designs, psychometric properties of measures, theoretical basis, and associations of CS/FS with diet. Electronic databases (PsychInfo), published reports, and systematic reviews on cooking and home food preparation interventions provided 834 articles of which 26 met the inclusion criteria. Multiple CS/FS measures were identified across three study designs-qualitative, cross-sectional, and dietary interventions-conducted from 1998 to 2013. Most measures were not theory-based, limited psychometric data were available, with little consistency of items or scales used for CS/FS measurements. Some positive associations between CS/FS and fruit and vegetables intake were reported, though lasting dietary changes were uncommon. The role of psycho-social (e.g., gender, attitudes) and external factors (e.g., food availability) on CS/FS is discussed. A conceptual framework of CS/FS components is presented for future measurement facilitation, which highlights the role for CS/FS on food-related behavior and dietary quality. This will aid future dietary intervention design.

New directions in the CernVM file system

NASA Astrophysics Data System (ADS)

Blomer, Jakob; Buncic, Predrag; Ganis, Gerardo; Hardi, Nikola; Meusel, Rene; Popescu, Radu

2017-10-01

The CernVM File System today is commonly used to host and distribute application software stacks. In addition to this core task, recent developments expand the scope of the file system into two new areas. Firstly, CernVM-FS emerges as a good match for container engines to distribute the container image contents. Compared to native container image distribution (e.g. through the “Docker registry”), CernVM-FS massively reduces the network traffic for image distribution. This has been shown, for instance, by a prototype integration of CernVM-FS into Mesos developed by Mesosphere, Inc. We present a path for a smooth integration of CernVM-FS and Docker. Secondly, CernVM-FS recently raised new interest as an option for the distribution of experiment conditions data. Here, the focus is on improved versioning capabilities of CernVM-FS that allows to link the conditions data of a run period to the state of a CernVM-FS repository. Lastly, CernVM-FS has been extended to provide a name space for physics data for the LIGO and CMS collaborations. Searching through a data namespace is often done by a central, experiment specific database service. A name space on CernVM-FS can particularly benefit from an existing, scalable infrastructure and from the POSIX file system interface.

Professionals’ Recommended Strategies to Improve Australian Adolescents’ Knowledge of Nutrition and Food Systems

PubMed Central

Sadegholvad, Sanaz; Yeatman, Heather; Parrish, Anne-Maree; Worsley, Anthony

2017-01-01

Background: Education and policy measures within schools are valuable strategies to promote health. This study explored views of experienced food-related educators, researchers and policy-makers regarding their recommended strategies to improve Australian adolescents’ knowledge of nutrition and food systems (N&FS). Methods: Semi-structured interviews were conducted with twenty-one experienced food-related experts from across Australia. Interviews were conducted either by telephone or face-to-face. Recorded interviews were transcribed verbatim and analyzed thematically. Results: Five central themes and five sub-themes were identified from food professionals’ suggestions for best strategies to improve adolescents’ knowledge of N&FS. The central themes included: (1) specific improvements in schools’ core curricula; (2) pre-service and in-service training of school teachers about N&FS; (3) training students to develop a critical mind about N&FS issues; (4) multidisciplinary collaborations to improve school-based N&FS education; and (5) a supportive N&FS education environment for students. Conclusion and implication: These findings provide a guide for curriculum developers, educational policy developers, and food educators to incorporate the suggested N&FS strategies into Australian education programs in order to improve Australian adolescents’ knowledge and skills of N&FS issues. The results of this investigation also may assist the development of international N&FS curricula guides. PMID:28783108

Professionals' Recommended Strategies to Improve Australian Adolescents' Knowledge of Nutrition and Food Systems.

PubMed

Sadegholvad, Sanaz; Yeatman, Heather; Parrish, Anne-Maree; Worsley, Anthony

2017-08-07

Education and policy measures within schools are valuable strategies to promote health. This study explored views of experienced food-related educators, researchers and policy-makers regarding their recommended strategies to improve Australian adolescents' knowledge of nutrition and food systems (N&FS). Semi-structured interviews were conducted with twenty-one experienced food-related experts from across Australia. Interviews were conducted either by telephone or face-to-face. Recorded interviews were transcribed verbatim and analyzed thematically. Five central themes and five sub-themes were identified from food professionals' suggestions for best strategies to improve adolescents' knowledge of N&FS. The central themes included: (1) specific improvements in schools' core curricula; (2) pre-service and in-service training of school teachers about N&FS; (3) training students to develop a critical mind about N&FS issues; (4) multidisciplinary collaborations to improve school-based N&FS education; and (5) a supportive N&FS education environment for students. These findings provide a guide for curriculum developers, educational policy developers, and food educators to incorporate the suggested N&FS strategies into Australian education programs in order to improve Australian adolescents' knowledge and skills of N&FS issues. The results of this investigation also may assist the development of international N&FS curricula guides.

Chelating capture and magnetic removal of non-magnetic heavy metal substances from soil.

PubMed

Fan, Liren; Song, Jiqing; Bai, Wenbo; Wang, Shengping; Zeng, Ming; Li, Xiaoming; Zhou, Yang; Li, Haifeng; Lu, Haiwei

2016-02-16

A soil remediation method based on magnetic beneficiation is reported. A new magnetic solid chelator powder, FS@IDA (core-shell Fe3O4@SiO2 nanoparticles coated with iminodiacetic acid chelators), was used as a reactive magnetic carrier to selectively capture non-magnetic heavy metals in soil by chelation and removal by magnetic separation. FS@IDA was prepared via inorganic-organic and organic synthesis reactions that generated chelating groups on the surface of magnetic, multi-core, core-shell Fe3O4@SiO2 (FS) nanoparticles. These reactions used a silane coupling agent and sodium chloroacetate. The results show that FS@IDA could chelate the heavy metal component of Cd, Zn, Pb, Cu and Ni carbonates, lead sulfate and lead chloride in water-insoluble salt systems. The resulting FS@IDA-Cd and FS@IDA-Pb chelates could be magnetically separated, resulting in removal rates of approximately 84.9% and 72.2% for Cd and Pb, respectively. FS@IDA could not remove the residual heavy metals and those bound to organic matter in the soil. FS@IDA did not significantly alter the chemical composition of the soil, and it allowed for fast chelating capture, simple magnetic separation and facilitated heavy metal elution. FS@IDA could also be easily prepared and reprocessed.

Chelating capture and magnetic removal of non-magnetic heavy metal substances from soil

NASA Astrophysics Data System (ADS)

Fan, Liren; Song, Jiqing; Bai, Wenbo; Wang, Shengping; Zeng, Ming; Li, Xiaoming; Zhou, Yang; Li, Haifeng; Lu, Haiwei

2016-02-01

A soil remediation method based on magnetic beneficiation is reported. A new magnetic solid chelator powder, FS@IDA (core-shell Fe3O4@SiO2 nanoparticles coated with iminodiacetic acid chelators), was used as a reactive magnetic carrier to selectively capture non-magnetic heavy metals in soil by chelation and removal by magnetic separation. FS@IDA was prepared via inorganic-organic and organic synthesis reactions that generated chelating groups on the surface of magnetic, multi-core, core-shell Fe3O4@SiO2 (FS) nanoparticles. These reactions used a silane coupling agent and sodium chloroacetate. The results show that FS@IDA could chelate the heavy metal component of Cd, Zn, Pb, Cu and Ni carbonates, lead sulfate and lead chloride in water-insoluble salt systems. The resulting FS@IDA-Cd and FS@IDA-Pb chelates could be magnetically separated, resulting in removal rates of approximately 84.9% and 72.2% for Cd and Pb, respectively. FS@IDA could not remove the residual heavy metals and those bound to organic matter in the soil. FS@IDA did not significantly alter the chemical composition of the soil, and it allowed for fast chelating capture, simple magnetic separation and facilitated heavy metal elution. FS@IDA could also be easily prepared and reprocessed.

Enzymatic functional stability of Zn-contaminated field-collected soils: an ecotoxicological perspective.

PubMed

Lessard, Isabelle; Sauvé, Sébastien; Deschênes, Louise

2014-06-15

Functional stability (FS) is an ecosystem attribute that is increasingly promoted in soil health assessment. However, FS is currently assessed comparatively, and it is therefore impossible to generate toxicity parameters. Additionally, the FS scores in the literature do not consider site and contamination history within the score. To address these issues, three new FS scores adapted to an ecotoxicological context and based on the Relative Soil Stability Index (RSSI) method were developed. The aim of the study was then to determine the FS score(s) that best describe the toxicity of metal-contaminated field-collected soils. Twenty pairs of Zn-contaminated soils (contaminated and reference soils) were collected on the field, and their enzymatic FS (arylsulfatase, protease, phosphatase and urease) and metal fractions (total and bioavailable) were analyzed. New RSSI-based and existing FS scores were calculated for each enzyme and correlated to the Zn fractions. One of the new RSSI-based scores was well correlated with the bioavailable labile Zn concentration for the arylsulfatase, phosphatase and urease (coefficients of regression higher than 0.50). Furthermore, this FS score was not affected by the soil organic matter and depended little on other soil properties. Other FS scores were correlated to labile Zn for only one enzyme, which varied according to the score. The new RSSI-based score thus better attributed Zn toxicity to field-collected soils than other FS scores. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

The extracellular matrix component laminin promotes gap junction formation in the rat anterior pituitary gland.

PubMed

Horiguchi, Kotaro; Kouki, Tom; Fujiwara, Ken; Kikuchi, Motoshi; Yashiro, Takashi

2011-03-01

Folliculo-stellate (FS) cells in the anterior pituitary gland are believed to have multifunctional properties. FS cells connect to each other not only by mechanical means, but also by gap junctional cell-to-cell communication. Using transgenic rats that express green fluorescent protein (GFP) specifically in FS cells in the anterior pituitary gland (S100b-GFP rats), we recently revealed that FS cells in primary culture markedly change their shape, and form numerous interconnections with neighboring FS cells in the presence of laminin, an extracellular matrix (ECM) component of the basement membrane. Morphological and functional changes in cells are believed to be partly modified by matricrine signaling, by which ECM components function as cellular signals. In the present study, we examined whether gap junction formation between FS cells is affected by matricrine cues. A cell sorter was used to isolate FS cells from male S100b-GFP rat anterior pituitary for primary culture. We observed that mRNA and protein levels of connexin 43 in gap junction channels were clearly higher in the presence of laminin. In addition, we confirmed the formation of gap junctions between FS cells in primary culture by electron microscopy. Interestingly, we also observed that FS cells in the presence of laminin displayed well-developed rough endoplasmic reticulum and Golgi apparatus. Our findings suggest that, in anterior pituitary gland, FS cells may facilitate functional roles such as gap junctional cell-to-cell communication by matricrine signaling.

Fabrication and Evaluation of Bis-GMA/TEGDMA Dental Resins/Composites Containing Nano Fibrillar Silicate

PubMed Central

Tian, Ming; Gao, Yi; Liu, Yi; Liao, Yiliang; Hedin, Nyle E.; Fong, Hao

2008-01-01

Objective To investigate the reinforcement of Bis-GMA/TEGDMA dental resins (without conventional glass filler) and composites (with conventional glass filler) with various mass fractions of nano fibrillar silicate (FS). Methods Three dispersion methods were studied to separate the silanized FS as nano-scaled single crystals and uniformly distribute them into dental matrices. The photo-curing behaviors of the Bis-GMA/TEGDMA/FS resins were monitored in situ by RT-NIR to study the photopolymerization rate and the vinyl double bond conversion. Mechanical properties (flexural strength, elastic modulus and work of fracture) of the nano FS reinforced resins/composites were tested, and Analysis of Variance (ANOVA) was used for the statistical analysis of the acquired data. The morphology of nano FS and the representative fracture surfaces of its reinforced resins/composites were examined by SEM/TEM. Results Impregnation of small mass fractions (1 % and 2.5 %) of nano FS into Bis-GMA/TEGDMA (50/50 mass ratio) dental resins/composites improved the mechanical properties substantially. Larger mass fraction of impregnation (7.5 %), however, did not further improve the mechanical properties (one way ANOVA, P > 0.05) and may even reduce the mechanical properties. The high degree of separation and uniform distribution of nano FS into dental resins/composites was a challenge. Impregnation of nano FS into dental resins/composites could result in two opposite effects: a reinforcing effect due to the highly separated and uniformly distributed nano FS single crystals, or a weakening effect due to the formation of FS agglomerates/particles. Significance Uniform distribution of highly separated nano FS single crystals into dental resins/composites could significantly improve the mechanical properties of the resins/composites. PMID:17572485

SeaWiFS Postlaunch Technical Report Series. Volume 4; The 1997 Prelaunch Radiometric Calibration of SeaWiFS

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Johnson, B. Carol; Early, Edward E.; Eplee, Robert E., Jr.; Barnes, Robert A.; Caffrey, Robert T.

1999-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) was originally calibrated by the instrument's manufacturer, Santa Barbara Research Center (SBRC), in November 1993. In preparation for an August 1997 launch, the SeaWiFS Project and the National Institute of Standards and Technology (NIST) undertook a second calibration of SeaWiFS in January and April 1997 at the facility of the spacecraft integrator, Orbital Sciences Corporation (OSC). This calibration occurred in two phases, the first after the final thermal vacuum test, and the second after the final vibration test of the spacecraft. For the calibration, SeaWiFS observed an integrating sphere from the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) at four radiance levels. The spectral radiance of the sphere at these radiance levels was also measured by the SeaWiFS Transfer Radiometer (SXR). In addition, during the calibration, SeaWiFS and the SXR observed the sphere at 16 radiance levels to determine the linearity of the SeaWiFS response. As part of the calibration analysis, the GSFC sphere was also characterized using a GSFC spectroradiometer. The 1997 calibration agrees with the initial 1993 calibration to within +/- 4%. The new calibration coefficients, computed before and after the vibration test, agree to within 0.5%. The response of the SeaWiFS channels in each band is linear to better than 1%. In order to compare to previous and current methods, the SeaWiFS radiometric responses are presented in two ways: using the nominal center wave-lengths for the eight bands; and using band-averaged spectral radiances. The band-averaged values are used in the flight calibration table. An uncertainty analysis for the calibration coefficients is also presented.

Digesta retention patterns of solute and different-sized particles in camelids compared with ruminants and other foregut fermenters.

PubMed

Dittmann, Marie T; Runge, Ullrich; Ortmann, Sylvia; Lang, Richard A; Moser, Dario; Galeffi, Cordula; Schwarm, Angela; Kreuzer, Michael; Clauss, Marcus

2015-07-01

The mean retention times (MRT) of solute or particles in the gastrointestinal tract and the forestomach (FS) are crucial determinants of digestive physiology in herbivores. Besides ruminants, camelids are the only herbivores that have evolved rumination as an obligatory physiological process consisting of repeated mastication of large food particles, which requires a particle sorting mechanism in the FS. Differences between camelids and ruminants have hardly been investigated so far. In this study we measured MRTs of solute and differently sized particles (2, 10, and 20 mm) and the ratio of large-to-small particle MRT, i.e. the selectivity factors (SF(10/2mm), SF(20/2mm), SF(20/10mm)), in three camelid species: alpacas (Vicugna pacos), llamas (Llama glama), and Bactrian camels (Camelus bactrianus). The camelid data were compared with literature data from ruminants and non-ruminant foregut fermenters (NRFF). Camelids and ruminants both had higher SF(10/2mm)FS than NRFF, suggesting convergence in the function of the FS sorting mechanism in contrast to NRFF, in which such a sorting mechanism is absent. The SF(20/10mm)FS did not differ between ruminants and camelids, indicating that there is a particle size threshold of about 1 cm in both suborders above which particle retention is not increased. Camelids did not differ from ruminants in MRT(2mm)FS, MRTsoluteFS, and the ratio MRT(2mm)FS/MRTsoluteFS, but they were more similar to 'cattle-' than to 'moose-type' ruminants. Camelids had higher SF(10/2mm)FS and higher SF(20/2mm)FS than ruminants, indicating a potentially slower particle sorting in camelids than in ruminants, with larger particles being retained longer in relation to small particles.

Dry Eye after Small Incision Lenticule Extraction (SMILE) versus Femtosecond Laser-Assisted in Situ Keratomileusis (FS-LASIK) for Myopia: A Meta-Analysis.

PubMed

Shen, Zeren; Zhu, Yanan; Song, Xiaohui; Yan, Jie; Yao, Ke

2016-01-01

To compare dry eye after small incision lenticule extraction (SMILE) and femtosecond laser-assisted LASIK (FS-LASIK) for correcting myopia. CENTRAL, Embase and PubMed were searched in November 2016. All randomized controlled trials (RCTs) and prospective cohorts that compared dry eye after SMILE with FS-LASIK were selected. Five cohorts and one RCT were identified for comparing dry eye after SMILE (291 eyes) and FS-LASIK (277 eyes). The pooled results revealed that the SMILE and FS-LASIK groups did not differ significantly in terms of Schirmer's I test (SIT) and tear film osmolarity (TFO) at any postoperative visits. By contrast, tear break up time (TBUT; p = 0.04 for one month, p < 0.001 for three months, and p = 0.02 for six months) and ocular surface disease index (OSDI; p < 0.001 for one month and three months, and p = 0.006 for six months) were significantly worse in the FS-LASIK group than in the SMILE group at follow-up. At six months postoperatively, TBUT and TFO values in both the SMILE and FS-LASIK groups and OSDI scores in the SMILE group returned to preoperative levels, but SIT values in both groups (p = 0.02 for the SMILE group and p < 0.001 for the FS-LASIK group) and OSDI in the FS-LASIK group (p < 0.001) were still statistically impaired. Dry eye after both SMILE and FS-LASIK usually occurs transiently. SMILE does not show obvious superiority over FS-LASIK by exhibiting similar and acceptable objective parameters, and SMILE may have milder subjective symptoms.

Dry Eye after Small Incision Lenticule Extraction (SMILE) versus Femtosecond Laser-Assisted in Situ Keratomileusis (FS-LASIK) for Myopia: A Meta-Analysis

PubMed Central

Shen, Zeren; Zhu, Yanan; Song, Xiaohui; Yan, Jie; Yao, Ke

2016-01-01

Purpose To compare dry eye after small incision lenticule extraction (SMILE) and femtosecond laser-assisted LASIK (FS-LASIK) for correcting myopia. Methods CENTRAL, Embase and PubMed were searched in November 2016. All randomized controlled trials (RCTs) and prospective cohorts that compared dry eye after SMILE with FS-LASIK were selected. Results Five cohorts and one RCT were identified for comparing dry eye after SMILE (291 eyes) and FS-LASIK (277 eyes). The pooled results revealed that the SMILE and FS-LASIK groups did not differ significantly in terms of Schirmer’s I test (SIT) and tear film osmolarity (TFO) at any postoperative visits. By contrast, tear break up time (TBUT; p = 0.04 for one month, p < 0.001 for three months, and p = 0.02 for six months) and ocular surface disease index (OSDI; p < 0.001 for one month and three months, and p = 0.006 for six months) were significantly worse in the FS-LASIK group than in the SMILE group at follow-up. At six months postoperatively, TBUT and TFO values in both the SMILE and FS-LASIK groups and OSDI scores in the SMILE group returned to preoperative levels, but SIT values in both groups (p = 0.02 for the SMILE group and p < 0.001 for the FS-LASIK group) and OSDI in the FS-LASIK group (p < 0.001) were still statistically impaired. Conclusion Dry eye after both SMILE and FS-LASIK usually occurs transiently. SMILE does not show obvious superiority over FS-LASIK by exhibiting similar and acceptable objective parameters, and SMILE may have milder subjective symptoms. PMID:27992482

Cardiovascular Disease and Patterns of Change in Functional Status Over 15 Years: Findings From the Atherosclerosis Risk in Communities (ARIC) Study.

PubMed

Kucharska-Newton, Anna; Griswold, Michael; Yao, Zhihao Howard; Foraker, Randi; Rose, Kathryn; Rosamond, Wayne; Wagenknecht, Lynne; Koton, Silvia; Pompeii, Lisa; Windham, B Gwen

2017-03-01

Cardiovascular disease (CVD) is the leading cause of premature disability, yet few prospective studies have examined functional status (FS) among persons with CVD. Our aim was to examine patterns of change in FS prior to and after hospitalization for nonfatal myocardial infarction, stroke, and heart failure among members of the Atherosclerosis Risk in Communities (ARIC) study cohort. FS was assessed using a modified Rosow-Breslau questionnaire administered during routine annual telephone interviews conducted from 1993 through 2007 among 15 277 ARIC study participants. An FS score was constructed as a summary measure of responses to questions about participants' ability to perform selected tasks of daily living (eg, walking half a mile, climbing stairs). Incidence of CVD was assessed through ARIC surveillance of hospitalized events. Rate of change in FS over time prior to and following a CVD event was examined using generalized estimating equations. A decline in FS was observed on average 2 years prior to a myocardial infarction hospitalization and on average 3 years prior to a stroke or heart failure hospitalization. FS post-myocardial infarction declined relative to pre-event levels but improved to close to pre-myocardial infarction levels within 3 years. Decline in FS following incident heart failure and stroke remained over time. Observed patterns of change in FS did not differ appreciably by race or sex. This study documents that a decline in FS precedes incidence of CVD-related hospitalization by at least 2 years, providing a strong argument for routine preventative assessment of FS among older adults. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

Flaxseed and pure secoisolariciresinol diglucoside, but not flaxseed hull, reduce human breast tumor growth (MCF-7) in athymic mice.

PubMed

Chen, Jianmin; Saggar, Jasdeep K; Corey, Paul; Thompson, Lilian U

2009-11-01

Previous studies have shown that dietary flaxseed (FS) can reduce the growth of established human breast tumors in athymic mice with low circulating estrogen concentrations. In this study, we determined the effect of FS compared with pure lignan at the level it is present in FS [secoisolariciresinol diglucoside (SDG)] and to the lignan-rich fraction [FS hull (FH)] on human breast tumor growth and their potential mechanisms of action. Ovariectomized, athymic mice, each with an implanted 17 beta-estradiol (E2) pellet (0.36 mg), were injected with human estrogen receptor (ER) positive breast cancer cells (MCF-7). When tumors were established, the E2 pellet was removed. Mice were fed either the control basal diet (BD), FS (100 g/kg diet), SDG (1 g/kg diet), or FH (18 g/kg diet) for 8 wk. Compared with the BD, FS and SDG significantly decreased the palpable tumor size, but effects of FS, SDG, and FH did not differ from one another. All treatments significantly inhibited cell proliferation, but only FS and SDG induced significantly higher apoptosis. Both FS and SDG significantly decreased mRNA expressions of Bcl2, cyclin D1, pS2, ERalpha, and ERbeta, epidermal growth factor receptor, and insulin-like growth factor receptor. FS also reduced human epidermal growth factor receptor 2 mRNA and SDG decreased phospho-specific mitogen-activated protein kinase expression. FH did not significantly reduce these biomarkers. In conclusion, pure SDG has a similar effect as FS in reducing tumor growth and in mechanisms of action, including downregulating ER- and growth factor-mediated cell signaling. The lesser effects of FH indicate a need for a higher dose to be more effective.

Surgeons' preferences and practice patterns regarding intraoperative frozen section during partial nephrectomy.

PubMed

Sidana, Abhinav; Donovan, James F; Gaitonde, Krishnanath

2014-08-01

Intraoperative frozen section (FS) evaluation for tumor margin during partial nephrectomy (PN) is a matter of controversy in urologic oncology. We evaluated the preferences and practice patterns of urologists regarding intraoperative FS during PN. A 17-item questionnaire was designed to collect information on surgeons' preferences and practice patterns regarding FS during PN. The survey was sent to the members of the Society of Urologic Oncology and Endourological Society. A total of 197 responses were received. Overall, 69% and 58% of respondents chose to obtain FS (always or sometimes) during open PN (OPN) and laparoscopic PN (LPN), respectively. There was a strong correlation between the surgeons' preferences during OPN and LPN. Younger surgeons are less likely to obtain FS during OPN. For surgeons who did not routinely obtain FS, "confidence about complete resection" was the most common reason (79%), followed by "no change in management with positive margins" (35%). Most surgeons (75%) believed the margins to be negative, if surgical margin was free of tumor microscopically by a single cell layer. Older surgeons considered negative margins to be free of tumor microscopically by ≥5 mm. Overall, 54% and 42% of respondents would repeat FS for positive microscopic margins during OPN and LPN, respectively. Of the respondents, 95% would not recommend additional treatment for positive margins on final pathology. Despite recent literature pointing to low clinical utility of FS, most surgeons still obtain FS during PN. Older surgeons tend to obtain FS more often. Fellowship training and practice type do not appear to influence preferences and practice patterns in regard to FS. Copyright © 2014 Elsevier Inc. All rights reserved.

Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate.

PubMed

Tian, Ming; Gao, Yi; Liu, Yi; Liao, Yiliang; Hedin, Nyle E; Fong, Hao

2008-02-01

To investigate the reinforcement of Bis-GMA/TEGDMA dental resins (without conventional glass filler) and composites (with conventional glass filler) with various mass fractions of nano fibrillar silicate (FS). Three dispersion methods were studied to separate the silanized FS as nano-scaled single crystals and uniformly distribute them into dental matrices. The photo-curing behaviors of the Bis-GMA/TEGDMA/FS resins were monitored in situ by RT-NIR to study the photopolymerization rate and the vinyl double bond conversion. Mechanical properties (flexural strength, elastic modulus and work-of-fracture) of the nano FS reinforced resins/composites were tested, and analysis of variance (ANOVA) was used for the statistical analysis of the acquired data. The morphology of nano FS and the representative fracture surfaces of its reinforced resins/composites were examined by SEM/TEM. Impregnation of small mass fractions (1% and 2.5%) of nano FS into Bis-GMA/TEGDMA (50/50 mass ratio) dental resins/composites improved the mechanical properties substantially. Larger mass fraction of impregnation (7.5%), however, did not further improve the mechanical properties (one way ANOVA, P>0.05) and may even reduce the mechanical properties. The high degree of separation and uniform distribution of nano FS into dental resins/composites was a challenge. Impregnation of nano FS into dental resins/composites could result in two opposite effects: a reinforcing effect due to the highly separated and uniformly distributed nano FS single crystals, or a weakening effect due to the formation of FS agglomerates/particles. Uniform distribution of highly separated nano FS single crystals into dental resins/composites could significantly improve the mechanical properties of the resins/composites.

Femtosecond (FS) laser vision correction procedure for moderate to high myopia: a prospective study of ReLEx(®) flex and comparison with a retrospective study of FS-laser in situ keratomileusis.

PubMed

Vestergaard, Anders; Ivarsen, Anders; Asp, Sven; Hjortdal, Jesper Ø

2013-06-01

To present our initial clinical experience with ReLEx(®) flex (ReLEx) for moderate to high myopia. We compare efficacy, safety and corneal higher-order aberrations after ReLEx with femtosecond laser in situ keratomileusis (FS-LASIK). Prospective study of ReLEx compared with a retrospective study of FS-LASIK. ReLEx is a new keratorefractive procedure, where a stromal lenticule is cut by a femtosecond laser and manually extracted. Forty patients were treated with ReLEx on both eyes. A comparable group of 41 FS-LASIK patients were retrospectively identified. Visual acuity, spherical equivalent (SE) and corneal tomography were measured before and 3 months after surgery. Preoperative SE averaged -7.50 ± 1.16 D (ReLEx) and -7.32 ± 1.09 D (FS-LASIK). For all eyes, mean corrected distance visual acuity remained unchanged in both groups. For eyes with emmetropia as target refraction, 41% of ReLEx and 61% of FS-LASIK eyes had an uncorrected distance visual acuity of logMAR ≤ 0.10 at day 1 after surgery, increasing to, respectively, 88% and 69% at 3 months. Mean SE was -0.06 ± 0.35 D 3 months after ReLEx and -0.53 ± 0.60 D after FS-LASIK. The proportion of eyes within ±1.00 D after 3 months was 100% (ReLEx) and 85% (FS-LASIK). For a 6.0-mm pupil, corneal spherical aberrations increased significantly less in ReLEx than FS-LASIK eyes. ReLEx is an all-in-one femtosecond laser refractive procedure, and in this study, results were comparable to FS-LASIK. Refractive predictability and corneal aberrations at 3 months seemed better than or equal to FS-LASIK, whereas visual recovery after ReLEx was slower. © 2012 The Authors. Acta Ophthalmologica © 2012 Acta Ophthalmologica Scandinavica Foundation.

Food insecurity is associated with poor sleep outcomes among US adults.

PubMed

Ding, Meng; Keiley, Margaret K; Garza, Kimberly B; Duffy, Patricia A; Zizza, Claire A

2015-03-01

Although food insecure (FI) adults are at risk of chronic conditions, little research attention is given to their health behaviors, such as sleep. We examined the associations between adult food security status and sleep duration, sleep latency, and sleep complaints reported to a health care professional. Our population-based sample included 5637 men and 5264 women (≥22 y) who participated in the NHANES 2005-2010. Food security status was assessed with USDA's 10-item adult Food Security Survey Module. Self-reported information about sleep duration, sleep latency, and sleep complaints to a health care professional were used as sleep outcomes. Multiple linear, stratified by sex, and logistic regression models were used to estimate the association between food security status and the 3 sleep outcomes. Very low food secure (FS) women reported significantly shorter sleep duration than fully FS women (difference: -30 ± 5.2 min; P < 0.01); however, no relation to sleep duration was observed among men. Among men, participants who were marginally FS (4 ± 1.1 min), low FS (4 ± 1.7 min), and very low FS (5 ± 1.8 min) reported significantly longer sleep latency than fully FS men (P < 0.05), but no association with sleep latency was observed among women. The divergent patterns in sleep duration and latency were likely because of our reference groups reporting undesirable sleep outcomes; fully FS men reported inadequate sleep and fully FS women reported long sleep latency. Among both men and women, marginally FS (OR: 1.64; 95% CI: 1.24, 2.16), low FS (OR: 1.63; 95% CI: 1.16, 2.30), and very low FS (OR: 1.99; 95% CI: 1.36, 2.92) participants were more likely to report sleep complaints than their fully FS counterparts (P < 0.05). Poor sleep quantity and quality may predispose FI adults to adverse health outcomes. © 2015 American Society for Nutrition.

Seizure-induced alterations in fast-spiking basket cell GABA currents modulate frequency and coherence of gamma oscillation in network simulations

NASA Astrophysics Data System (ADS)

Proddutur, Archana; Yu, Jiandong; Elgammal, Fatima S.; Santhakumar, Vijayalakshmi

2013-12-01

Gamma frequency oscillations have been proposed to contribute to memory formation and retrieval. Fast-spiking basket cells (FS-BCs) are known to underlie development of gamma oscillations. Fast, high amplitude GABA synapses and gap junctions have been suggested to contribute to gamma oscillations in FS-BC networks. Recently, we identified that, apart from GABAergic synapses, FS-BCs in the hippocampal dentate gyrus have GABAergic currents mediated by extrasynaptic receptors. Our experimental studies demonstrated two specific changes in FS-BC GABA currents following experimental seizures [Yu et al., J. Neurophysiol. 109, 1746 (2013)]: increase in the magnitude of extrasynaptic (tonic) GABA currents and a depolarizing shift in GABA reversal potential (EGABA). Here, we use homogeneous networks of a biophysically based model of FS-BCs to examine how the presence of extrasynaptic GABA conductance (gGABA-extra) and experimentally identified, seizure-induced changes in gGABA-extra and EGABA influence network activity. Networks of FS-BCs interconnected by fast GABAergic synapses developed synchronous firing in the dentate gamma frequency range (40-100 Hz). Systematic investigation revealed that the biologically realistic range of 30 to 40 connections between FS-BCs resulted in greater coherence in the gamma frequency range when networks were activated by Poisson-distributed dendritic synaptic inputs rather than by homogeneous somatic current injections, which were balanced for FS-BC firing frequency in unconnected networks. Distance-dependent conduction delay enhanced coherence in networks with 30-40 FS-BC interconnections while inclusion of gap junctional conductance had a modest effect on coherence. In networks activated by somatic current injections resulting in heterogeneous FS-BC firing, increasing gGABA-extra reduced the frequency and coherence of FS-BC firing when EGABA was shunting (-74 mV), but failed to alter average FS-BC frequency when EGABA was depolarizing (-54 mV). When FS-BCs were activated by biologically based dendritic synaptic inputs, enhancing gGABA-extra reduced the frequency and coherence of FS-BC firing when EGABA was shunting and increased average FS-BC firing when EGABA was depolarizing. Shifting EGABA from shunting to depolarizing potentials consistently increased network frequency to and above high gamma frequencies (>80 Hz). Since gamma oscillations may contribute to learning and memory processing [Fell et al., Nat. Neurosci. 4, 1259 (2001); Jutras et al., J. Neurosci. 29, 12521 (2009); Wang, Physiol. Rev. 90, 1195 (2010)], our demonstration that network oscillations are modulated by extrasynaptic inhibition in FS-BCs suggests that neuroactive compounds that act on extrasynaptic GABA receptors could impact memory formation by modulating hippocampal gamma oscillations. The simulation results indicate that the depolarized FS-BC GABA reversal, observed after experimental seizures, together with enhanced spillover extrasynaptic GABA currents are likely to promote generation of focal high frequency activity associated with epileptic networks.

Mass Spec Studio for Integrative Structural Biology

PubMed Central

Rey, Martial; Sarpe, Vladimir; Burns, Kyle; Buse, Joshua; Baker, Charles A.H.; van Dijk, Marc; Wordeman, Linda; Bonvin, Alexandre M.J.J.; Schriemer, David C.

2015-01-01

SUMMARY The integration of biophysical data from multiple sources is critical for developing accurate structural models of large multiprotein systems and their regulators. Mass spectrometry (MS) can be used to measure the insertion location for a wide range of topographically sensitive chemical probes, and such insertion data provide a rich, but disparate set of modeling restraints. We have developed a software platform that integrates the analysis of label-based MS data with protein modeling activities (Mass Spec Studio). Analysis packages can mine any labeling data from any mass spectrometer in a proteomics-grade manner, and link labeling methods with data-directed protein interaction modeling using HADDOCK. Support is provided for hydrogen/ deuterium exchange (HX) and covalent labeling chemistries, including novel acquisition strategies such as targeted HX-tandem MS (MS2) and data-independent HX-MS2. The latter permits the modeling of highly complex systems, which we demonstrate by the analysis of microtubule interactions. PMID:25242457

BACCardI--a tool for the validation of genomic assemblies, assisting genome finishing and intergenome comparison.

PubMed

Bartels, Daniela; Kespohl, Sebastian; Albaum, Stefan; Drüke, Tanja; Goesmann, Alexander; Herold, Julia; Kaiser, Olaf; Pühler, Alfred; Pfeiffer, Friedhelm; Raddatz, Günter; Stoye, Jens; Meyer, Folker; Schuster, Stephan C

2005-04-01

We provide the graphical tool BACCardI for the construction of virtual clone maps from standard assembler output files or BLAST based sequence comparisons. This new tool has been applied to numerous genome projects to solve various problems including (a) validation of whole genome shotgun assemblies, (b) support for contig ordering in the finishing phase of a genome project, and (c) intergenome comparison between related strains when only one of the strains has been sequenced and a large insert library is available for the other. The BACCardI software can seamlessly interact with various sequence assembly packages. Genomic assemblies generated from sequence information need to be validated by independent methods such as physical maps. The time-consuming task of building physical maps can be circumvented by virtual clone maps derived from read pair information of large insert libraries.

A new FPGA architecture suitable for DSP applications

NASA Astrophysics Data System (ADS)

Liyun, Wang; Jinmei, Lai; Jiarong, Tong; Pushan, Tang; Xing, Chen; Xueyan, Duan; Liguang, Chen; Jian, Wang; Yuan, Wang

2011-05-01

A new FPGA architecture suitable for digital signal processing applications is presented. DSP modules can be inserted into FPGA conveniently with the proposed architecture, which is much faster when used in the field of digital signal processing compared with traditional FPGAs. An advanced 2-level MUX (multiplexer) is also proposed. With the added SLEEP MODE PASS to traditional 2-level MUX, static leakage is reduced. Furthermore, buffers are inserted at early returns of long lines. With this kind of buffer, the delay of the long line is improved by 9.8% while the area increases by 4.37%. The layout of this architecture has been taped out in standard 0.13 μm CMOS technology successfully. The die size is 6.3 × 4.5 mm2 with the QFP208 package. Test results show that performances of presented classical DSP cases are improved by 28.6%-302% compared with traditional FPGAs.

Total internal reflection-evanescent coupler for fiber-to-waveguide integration of planar optoelectric devices.

PubMed

Lu, Zhaolin; Prather, Dennis W

2004-08-01

We present a method for parallel coupling from a single-mode fiber, or fiber ribbon, into a silicon-on-insulator waveguide for integration with silicon optoelectronic circuits. The coupler incorporates the advantages of the vertically tapered waveguides and prism couplers, yet offers the flexibility of planar integration. The coupler can be fabricated by use of either wafer polishing technology or gray-scale photolithography. When optimal coupling is achieved in our experimental setup, the coupler can be packaged by epoxy bonding to form a fiber-waveguide parallel coupler or connector. Two-dimensional electromagnetic calculation predicts a coupling efficiency of 77% (- 1.14-dB insertion loss) for a silicon-to-silicon coupler with a uniform tunnel layer. The coupling efficiency is experimentally achieved to be 46% (-3.4-dB insertion loss), excluding the loss in silicon and the reflections from the input surface and the output facet.

Drugs dispensed at the Division of Neonatology at University Hospital in Río Cuarto, Córdoba, Argentina.

PubMed

Fungo, Marta Stella Maris; Vega, Elena María

2013-04-01

The objective was to analyze the number of drugs dispensed by the Pharmacy Department to the Neonatology Division, to find out if the use of these drugs is described on the package insert approved by the Administración Nacional de Medicamentos, Alimentos y Tecnología, ANMAT (Drug, Food and Technology Administration of Argentina) and to compare such information with that provided by Medical Associations and Commissions. Analytical, observational and retrospective study in which drugs were analyzed based on dosage units, costs and relevance in the 2011 annual budget. We analyzed the information found in ANMAT-approved label inserts, in the Neonatal Pharmacopeia of the Sociedad Argentina de Pediatría and in the Formularies of the Confederación Médica Argentina and the Comisión Nacional del Medicamento (National Medication Commission). A total of 102 drugs (91 drug substances) were dispensed throughout 2011. Drugs most commonly supplied were: antiinfective agents for systemic use (24.51%), agents for the blood and blood forming organs, cardiovascular system, and nervous system (12.72% each). The total expenditure was ARS 263,285.52. Only 21 drugs accounted for 90.73% of the cost. Out of the 14 drugs in this group, only 1 had information related to its use in neonatology in all its labels (package inserts), only 4 in some of their product information and there was no information at all in any of the remaining 9 drugs. The Neonatal Pharmacopeia reported on 12 of the 14 drugs, while the Formularies made a reference to 9 of the 14 drugs. The most widely used drugs were antiinfectives for systemic use. A total of 21 drugs accounted for 90.73% of the annual cost in drugs. Out of 14, only 1 had information of its use in neonatology in all its labels and 9 corresponded to off-label use.

System for Packaging Planetary Samples for Return to Earth

NASA Technical Reports Server (NTRS)

Badescu, Mircea; Bar-Cohen, Yoseph; Backes, paul G.; Sherrit, Stewart; Bao, Xiaoqi; Scott, James S.

2010-01-01

A system is proposed for packaging material samples on a remote planet (especially Mars) in sealed sample tubes in preparation for later return to Earth. The sample tubes (Figure 1) would comprise (1) tubes initially having open tops and closed bottoms; (2) small, bellows-like collapsible bodies inside the tubes at their bottoms; and (3) plugs to be eventually used to close the tops of the tubes. The top inner surface of each tube would be coated with solder. The side of each plug, which would fit snugly into a tube, would feature a solder-filled ring groove. The system would include equipment for storing, manipulating, filling, and sealing the tubes. The containerization system (see Figure 2) will be organized in stations and will include: the storage station, the loading station, and the heating station. These stations can be structured in circular or linear pattern to minimize the manipulator complexity, allowing for compact design and mass efficiency. The manipulation of the sample tube between stations is done by a simple manipulator arm. The storage station contains the unloaded sample tubes and the plugs before sealing as well as the sealed sample tubes with samples after loading and sealing. The chambers at the storage station also allow for plug insertion into the sample tube. At the loading station the sample is poured or inserted into the sample tube and then the tube is topped off. At the heating station the plug is heated so the solder ring melts and seals the plug to the sample tube. The process is performed as follows: Each tube is filled or slightly overfilled with sample material and the excess sample material is wiped off the top. Then, the plug is inserted into the top section of the tube packing the sample material against the collapsible bellowslike body allowing the accommodation of the sample volume. The plug and the top of the tube are heated momentarily to melt the solder in order to seal the tube.

Pain and convalescence following laparoscopic ventral hernia repair.

PubMed

Eriksen, Jens Ravn

2011-12-01

Severe pain is usual after laparoscopic ventral hernia repair (LVHR). Mesh fixation with titanium tacks may play a key role in the development of acute and chronic pain and alternative fixation methods should therefore be investigated. This PhD thesis was based on three studies and aimed too: 1) assess the intensity and impact of postoperative pain by detailed patient-reported description of pain and convalescence after LVHR (Study I), 2) evaluate the feasibility of fibrin sealant (FS) for mesh fixation in an experimental pig model (Study II), and 3) investigate FS vs. tacks for mesh fixation in LVHR in a randomised, double-blinded, clinical controlled study with acute postoperative pain as the primary outcome (Study III). In Study I - a prospective descriptive study - 35 patients were prospectively included and underwent LVHR. Scores of pain, quality of life, convalescence, fatigue, and general well-being were obtained from each patient. Follow-up was six months. Average pain from postoperative day (POD) 0-2 and POD 0-6 measured on a 0-100 mm visual analogue scale (VAS) was 61 and 48, respectively. Pain scores reached preoperative values at POD 30. The incidence of severe chronic pain was 7%. No parameter predicted postoperative pain significantly. Significant correlations were found between pain, and general well-being (rS= -0.8, p < 0.001), satisfaction (rS= -0.67, p < quality of life score (rS= -0.63, p < 0.001) six months postoperatively. Patients resumed normal daily activity at POD 14. In Study II - a randomised experimental study in pigs - nine pigs were operated laparoscopically with insertion of two different meshes fixed with either FS or tacks. All pigs were euthanized on POD 30. The primary outcome parameter was strength of ingrowth between the mesh and the anterior abdominal wall. A mechanical peel test was performed for each tissue sample. The secondary outcome parameters were grade and strength of adhesions to the mesh, shrinkage and displacement/folding of the mesh and histological parameters. All nine pigs survived without complications until sacrifice. No meshes were displaced from their initial position at autopsy, but in two cases mesh folding was observed. No significant difference in strength of ingrowth was found between different fixation methods or mesh types. Furthermore, no significant difference was found in grade or strength of adhesions or any histological parameters. In Study III - a randomised, controlled, double-blinded, multicenter trial - 40 patients with umbilical hernia defects between 1.5-5 cm, were randomly assigned to receive FS or titanium tacks for mesh fixation in LVHR. Patients, care givers and those assessing the outcomes were blinded to group assignment. The primary outcome was average pain from POD 0-2 (VAS score). Secondary outcome parameters were fatigue, general well-being and time to resume normal daily activity. Follow-up was one month for all. Patients in the FS group reported significantly less pain at POD 0-2 (median VAS 38 (range 6-98) vs. 60 (18-96), p = 0.01). Absolute VAS score difference between groups was 20 mm (95% CI 4-35 mm) at activity, and 19 mm (95% CI 3-34 mm) at rest. Patients in the FS group reported significantly less discomfort from POD 0-2 and POD 0-10, compared with the tack group. No significant difference was found in fatigue score between groups. No significant difference in hospital stay, hernia diameter, or morphine consumption in the post anesthesia care unit was found between groups. Patients in the FS group resumed normal daily activity at POD 7 (1-66) versus POD 18 (1-95) in the tack group (p = 0.03). No recurrences were observed. No adverse events or side effects were observed. No significant differences in predefined complications were found between groups. In conclusion, pain is a significant clinical problem after LVHR with impact on general well-being, quality of life and patient satisfaction. This issue must have first priority in future ventral hernia repair research. It is now documented, that the simple application of fibrin glue instead of titanium tacks for mesh fixation in LVHR of defects < 5 cm significantly reduced acute pain, discomfort and the period of convalescence. Long-term follow-up will show the value of FS fixation in terms of chronic pain and recurrence. As FS potentially may solve many of the outcome problems associated with LVHR, future studies should include larger hernia defects including large incisional hernias, as the operative technique may be different.

PIMMS (Pragmatic Insertional Mutation Mapping System) Laboratory Methodology a Readily Accessible Tool for Identification of Essential Genes in Streptococcus

PubMed Central

Blanchard, Adam M.; Egan, Sharon A.; Emes, Richard D.; Warry, Andrew; Leigh, James A.

2016-01-01

The Pragmatic Insertional Mutation Mapping (PIMMS) laboratory protocol was developed alongside various bioinformatics packages (Blanchard et al., 2015) to enable detection of essential and conditionally essential genes in Streptococcus and related bacteria. This extended the methodology commonly used to locate insertional mutations in individual mutants to the analysis of mutations in populations of bacteria. In Streptococcus uberis, a pyogenic Streptococcus associated with intramammary infection and mastitis in ruminants, the mutagen pGhost9:ISS1 was shown to integrate across the entire genome. Analysis of >80,000 mutations revealed 196 coding sequences, which were not be mutated and a further 67 where mutation only occurred beyond the 90th percentile of the coding sequence. These sequences showed good concordance with sequences within the database of essential genes and typically matched sequences known to be associated with basic cellular functions. Due to the broad utility of this mutagen and the simplicity of the methodology it is anticipated that PIMMS will be of value to a wide range of laboratories in functional genomic analysis of a wide range of Gram positive bacteria (Streptococcus, Enterococcus, and Lactococcus) of medical, veterinary, and industrial significance. PMID:27826289

Trichoderma reesei FS10-C enhances phytoremediation of Cd-contaminated soil by Sedum plumbizincicola and associated soil microbial activities

PubMed Central

Teng, Ying; Luo, Yang; Ma, Wenting; Zhu, Lingjia; Ren, Wenjie; Luo, Yongming; Christie, Peter; Li, Zhengao

2015-01-01

This study aimed to explore the effects of Trichoderma reesei FS10-C on the phytoremediation of Cd-contaminated soil by the hyperaccumulator Sedum plumbizincicola and on soil fertility. The Cd tolerance of T. reesei FS10-C was characterized and then a pot experiment was conducted to investigate the growth and Cd uptake of S. plumbizincicola with the addition of inoculation agents in the presence and absence of T. reesei FS10-C. The results indicated that FS10-C possessed high Cd resistance (up to 300 mg L-1). All inoculation agents investigated enhanced plant shoot biomass by 6–53% of fresh weight and 16–61% of dry weight and Cd uptake by the shoots by 10–53% compared with the control. All inoculation agents also played critical roles in increasing soil microbial biomass and microbial activities (such as biomass C, dehydrogenase activity and fluorescein diacetate hydrolysis activity). Two inoculation agents accompanied by FS10-C were also superior to the inoculation agents, indicating that T. reesei FS10-C was effective in enhancing both Cd phytoremediation by S. plumbizincicola and soil fertility. Furthermore, solid fermentation powder of FS10-C showed the greatest capacity to enhance plant growth, Cd uptake, nutrient release, microbial biomass and activities, as indicated by its superior ability to promote colonization by Trichoderma. The solid fermentation powder of FS10-C might serve as a suitable inoculation agent for T. reesei FS10-C to enhance both the phytoremediation efficiency of Cd-contaminated soil and soil fertility. PMID:26113858

Caveolin 3-mediated integrin β1 signaling is required for the proliferation of folliculostellate cells in rat anterior pituitary gland under the influence of extracellular matrix.

PubMed

Horiguchi, Kotaro; Fujiwara, Ken; Ilmiawati, Cimi; Kikuchi, Motoshi; Tsukada, Takehiro; Kouki, Tom; Yashiro, Takashi

2011-07-01

Folliculostellate (FS) cells in the anterior pituitary gland are believed to have multifunctional properties. Using transgenic rats that express green fluorescent protein (GFP) specifically in FS cells in the anterior pituitary gland (S100b-GFP rats), we recently revealed that FS cells in primary culture exhibited marked proliferation in the presence of laminin, an extracellular matrix (ECM) component of the basement membrane. In a process referred to as matricrine action, FS cells receive ECM as a signal through their receptors, which results in morphological and functional changes. In this study, we investigated matricrine signaling in FS cells and observed that the proliferation of FS cells is mediated by integrin β1, which is involved in various signaling pathways for cell migration and proliferation in response to ECM. Then, we analyzed downstream events of the integrin β1 signaling pathway in the proliferation of FS cells and identified caveolin 3 as a potential candidate molecule. Caveolin 3 is a membrane protein that binds cholesterol and a number of signaling molecules that interact with integrin β1. Using specific small interfering RNA of caveolin 3, the proliferation of FS cells was inhibited. Furthermore, caveolin 3 drove activation of the mitogen-activated protein kinase (MAPK) signaling cascades, which resulted in upregulation of cyclin D1 in FS cells. These findings suggest that matricrine signaling in the proliferation of FS cells was transduced by a caveolin 3-mediated integrin β1 signaling pathway and subsequent activation of the MAPK pathway. © 2011 Society for Endocrinology

Functional Semi-Blind Source Separation Identifies Primary Motor Area Without Active Motor Execution.

PubMed

Porcaro, Camillo; Cottone, Carlo; Cancelli, Andrea; Salustri, Carlo; Tecchio, Franca

2018-04-01

High time resolution techniques are crucial for investigating the brain in action. Here, we propose a method to identify a section of the upper-limb motor area representation (FS_M1) by means of electroencephalographic (EEG) signals recorded during a completely passive condition (FS_M1bySS). We delivered a galvanic stimulation to the median nerve and we applied to EEG the semi-Blind Source Separation (s-BSS) algorithm named Functional Source Separation (FSS). In order to prove that FS_M1bySS is part of FS_M1, we also collected EEG in a motor condition, i.e. during a voluntary movement task (isometric handgrip) and in a rest condition, i.e. at rest with eyes open and closed. In motor condition, we show that the cortico-muscular coherence (CMC) of FS_M1bySS does not differ from FS_ M1 CMC (0.04 for both sources). Moreover, we show that the FS_M1bySS's ongoing whole band activity during Motor and both rest conditions displays high mutual information and time correlation with FS_M1 (above 0.900 and 0.800, respectively) whereas much smaller ones with the primary somatosensory cortex [Formula: see text] (about 0.300 and 0.500, [Formula: see text]). FS_M1bySS as a marker of the upper-limb FS_M1 representation obtainable without the execution of an active motor task is a great achievement of the FSS algorithm, relevant in most experimental, neurological and psychiatric protocols.

Afebrile seizure subsequent to initial febrile seizure.

PubMed

Fallah, Razieh; Razieh, Fallah; Akhavan Karbasi, Sedighah; Sedighah, Akhavan Karbasi; Golestan, Motahhareh; Motahhareh, Golestan

2012-05-01

Febrile seizure (FS) is the most common paediatric neurological problem. The purpose of this study was to determine the frequency of afebrile seizures subsequent to FS in children with initial FS and to evaluate its risk factors. A prospective study was conducted on all children (age 6 months to 6 years) referred with initial FS to the Shahid Sadoughi Hospital, Yazd, Iran, between August 2004 and March 2006, who were followed up for at least 15 months for the occurrence of subsequent afebrile seizures. 161 boys and 120 girls (mean age 2.12 ± 1.33 years) were followed up for 34.1 ± 7.8 months. 87 (31%) patients had complex FS and 19 (6.7%) patients had subsequent afebrile seizure, with a mean occurrence time of 10.6 ± 6.4 months. Univariate analysis using chi-square test showed that initial FS within one hour of developing fever (p = 0.0001), neurodevelopmental delay (p = 0.0001), family history of epilepsy (p = 0.0001), recurrent FS (p = 0.003) and focal FS (p = 0.04) were risk factors for subsequent afebrile seizure. On multivariate analysis, neurodevelopmental delay (odds ratio [OR] 2.6, 95% confidence interval [CI] 2.3-3.4), initial FS within one hour of developing fever (OR 1.7, 95% CI 1.2-2.1) and family history of epilepsy (OR 1.5, 95% CI 1.1-1.9) were significant factors. Special attention should be paid to children with FS during history-taking and developmental assessments to identify high-risk patients and those who might need prophylactic anticonvulsants.

Feeding schemes and C/N ratio of a laboratory-scale step-fed sequencing batch reactor for liquid swine manure treatment.

PubMed

Wu, Sarah Xiao; Zhu, Jun; Chen, Lide

2017-07-03

This study was undertaken to investigate the effect of two split feeding schemes (600 mL/200 mL and 400 mL/400 mL, designated as FS1 and FS2, respectively) on the performance of a step-fed sequencing batch reactor (SBR) in treating liquid swine manure for nutrient removal. The SBR was run on an 8-h cycle with a repeated pattern of anaerobic/anoxic/aerobic phases in each cycle and the two feedings always occurred at the beginning of each anaerobic phase. A low-level aeration was used (1.0 L/m 3 .sec) for the anoxic/aerobic phase to facilitate nitrification and phosphorus uptake while reducing the energy consumption. The results showed that FS1 reduced NH 4 + -N by 98.7% and FS2 by 98.3%. FS1 had 12.3 mg/L NO 3 -N left in the effluent, while FS2 had 4.51 mg/L. For soluble phosphorus removal, FS1 achieved 95.2%, while FS2 reached only 68.5%. Both feeding schemes achieved ≥ 95% removal of COD. A good power regression was observed between total nitrogen (sum of all three nitrogen species) and the carbon to nitrogen (C/N) ratio, with the correlation coefficients of 0.9729 and 0.9542 for FS1 and FS2, respectively, based on which it was concluded that higher C/N ratios were required to achieve higher nitrogen removal efficiencies.

An investigation of nonuniform dose deposition from an electron beam

NASA Astrophysics Data System (ADS)

Lilley, William; Luu, Kieu X.

1994-08-01

In a search for an explanation of nonuniform electron-beam dose deposition, the integrated tiger series (ITS) of coupled electron/photon Monte Carlo transport codes was used to calculate energy deposition in the package materials of an application-specific integrated circuit (ASIC) while the thicknesses of some of the materials were varied. The thicknesses of three materials that were in the path of an electron-beam pulse were varied independently so that analysis could determine how the radiation dose measurements using thermoluminescent dosimeters (TLD's) would be affected. The three materials were chosen because they could vary during insertion of the die into the package or during the process of taking dose measurements. The materials were aluminum, HIPEC (a plastic), and silver epoxy. The calculations showed that with very small variations in thickness, the silver epoxy had a large effect on the dose uniformity over the area of the die.

Big Software for SmallSats: Adapting CFS to CubeSat Missions

NASA Technical Reports Server (NTRS)

Cudmore, Alan P.; Crum, Gary; Sheikh, Salman; Marshall, James

2015-01-01

Expanding capabilities and mission objectives for SmallSats and CubeSats is driving the need for reliable, reusable, and robust flight software. While missions are becoming more complicated and the scientific goals more ambitious, the level of acceptable risk has decreased. Design challenges are further compounded by budget and schedule constraints that have not kept pace. NASA's Core Flight Software System (cFS) is an open source solution which enables teams to build flagship satellite level flight software within a CubeSat schedule and budget. NASA originally developed cFS to reduce mission and schedule risk for flagship satellite missions by increasing code reuse and reliability. The Lunar Reconnaissance Orbiter, which launched in 2009, was the first of a growing list of Class B rated missions to use cFS. Large parts of cFS are now open source, which has spurred adoption outside of NASA. This paper reports on the experiences of two teams using cFS for current CubeSat missions. The performance overheads of cFS are quantified, and the reusability of code between missions is discussed. The analysis shows that cFS is well suited to use on CubeSats and demonstrates the portability and modularity of cFS code.

Dry Eye Disease following Refractive Surgery: A 12-Month Follow-Up of SMILE versus FS-LASIK in High Myopia

PubMed Central

Wang, Bingjie; Chu, Renyuan; Dai, Jinhui; Qu, Xiaomei; Zhou, Hao

2015-01-01

Purpose. To compare dry eye disease following SMILE versus FS-LASIK. Design. Prospective, nonrandomised, observational study. Patients. 90 patients undergoing refractive surgery for myopia were included. 47 eyes underwent SMILE and 43 eyes underwent FS-LASIK. Methods. Evaluation of dry eye disease was conducted preoperatively and at 1, 3, 6, and 12 months postoperatively, using the Salisbury Eye Evaluation Questionnaire (SEEQ) and TBUT. Results. TBUT reduced following SMILE at 1 and 3 months (p < 0.001) and at 1, 3, and 6 months following FS-LASIK (p < 0.001). TBUT was greater following SMILE than FS-LASIK at 3, 6, and 12 months (p < 0.001, p < 0.001, and p = 0.009, resp.). SEEQ scores increased (greater symptoms) following SMILE at 1 month (p < 0.001) and 3 months (p = 0.003) and at 1, 3, and 6 months following FS-LASIK (p < 0.001). SMILE produced lower SEEQ scores (fewer symptoms) than FS-LASIK at 1, 3, and 6 months (p < 0.001). Conclusion. SMILE produces less dry eye disease than FS-LASIK at 6 months postoperatively but demonstrates similar degrees of dry eye disease at 12 months. PMID:26649190

Femtosecond lasers for laser in situ keratomileusis: a systematic review and meta-analysis

PubMed Central

Huhtala, Anne; Pietilä, Juhani; Mäkinen, Petri; Uusitalo, Hannu

2016-01-01

Purpose The aim of this study was to review and meta-analyze whether there are differences between reported femtosecond (FS) lasers for laser-assisted in situ keratomileusis (LASIK) in terms of efficacy, predictability, and safety as primary outcomes and corneal flap thickness measurements and pre- and postoperative complications as secondary outcomes. Methods A comprehensive literature search of PubMed, Science Direct, Scopus, and Cochrane CENTRAL Trials Library databases was conducted to identify the relevant prospective randomized controlled trials of FS lasers for LASIK. Thirty-one articles describing a total of 5,404 eyes were included. Results Based on efficacy, IntraLase FS 10 and 30 kHz gave the best results. Based on predictability and safety, there were no differences between various FS lasers. FEMTO LDV and IntraLase FS 60 kHz produced the most accurate flap thicknesses. IntraLase and Wavelight SF200 had the fewest intraoperative complications. IntraLase, Visumax, and Wavelight FS200 had the most seldom postoperative complications. Conclusion There were dissimilarities between different FS lasers based on efficacy and intraoperative and postoperative complications. All FS lasers were predictable and safe for making corneal flaps in LASIK. PMID:27022236

Femtosecond lasers for laser in situ keratomileusis: a systematic review and meta-analysis.

PubMed

Huhtala, Anne; Pietilä, Juhani; Mäkinen, Petri; Uusitalo, Hannu

2016-01-01

The aim of this study was to review and meta-analyze whether there are differences between reported femtosecond (FS) lasers for laser-assisted in situ keratomileusis (LASIK) in terms of efficacy, predictability, and safety as primary outcomes and corneal flap thickness measurements and pre- and postoperative complications as secondary outcomes. A comprehensive literature search of PubMed, Science Direct, Scopus, and Cochrane CENTRAL Trials Library databases was conducted to identify the relevant prospective randomized controlled trials of FS lasers for LASIK. Thirty-one articles describing a total of 5,404 eyes were included. Based on efficacy, IntraLase FS 10 and 30 kHz gave the best results. Based on predictability and safety, there were no differences between various FS lasers. FEMTO LDV and IntraLase FS 60 kHz produced the most accurate flap thicknesses. IntraLase and Wavelight SF200 had the fewest intraoperative complications. IntraLase, Visumax, and Wavelight FS200 had the most seldom postoperative complications. There were dissimilarities between different FS lasers based on efficacy and intraoperative and postoperative complications. All FS lasers were predictable and safe for making corneal flaps in LASIK.

Extraction of chitin from red crab shell waste by cofermentation with Lactobacillus paracasei subsp. tolerans KCTC-3074 and Serratia marcescens FS-3.

PubMed

Jung, W J; Jo, G H; Kuk, J H; Kim, K Y; Park, R D

2006-06-01

For one-step extraction of chitin from red crab shell waste, cofermentation with Lactobacillus paracasei subsp. tolerans KCTC-3074, a lactic-acid-producing bacterium, and Serratia marcescens FS-3, a protease-producing bacterium, was conducted. Fermentation with single strain (L. 3074 or FS-3) was also conducted. At day 7, the pH in L. 3074, FS-3, and L. 3074+FS-3 (1:1) treatment decreased from 6.90 to 3.30, 5.88, and 3.48, respectively. Ash content in the residue after fermentation treatment of crab shells in L. 3074 and L. 3074+FS-3 (1:1) treatment drastically decreased from 41.2% to 3.19 and 1.15%, respectively. In L. 3074+FS-3 (1:1) cofermentation, the level of demineralization was the highest value of 97.2%, but the level of deproteinization in the cofermentation was 52.6% at day 7. Protein content in the treatment of FS-3 alone reduced from 22.4 to 3.62%. These results indicate that cofermentation of the shells using the two strains is efficient and applicable for the one-step extraction of crude chitin from red crab shell waste.

PBDD/Fs in surface sediments from the East River, China.

PubMed

Ren, M; Peng, P A; Chen, D Y; Chen, P; Zhou, L

2009-09-01

The contamination status of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) was preliminarily investigated in surface sediments from the East River. The concentrations of eight 2,3,7,8-substituted tetra- to hexa- PBDD/Fs were found to be in the range of 0.32-110 (mean 13) pg g(-1) and the corresponding TEQ concentrations were 0.087-18 (mean 2) pg I-TEQ g(-1). All sediments were characterized by the dominant PBDFs. 2,3,4,7,8-PeBDF was the most important TEQ contributor, accounting for 47%-77% of the total I-TEQ of PBDD/Fs. PCDD/Fs contributed dominantly to the total TEQs of PCDD/Fs, PBDD/Fs and dioxin-like PCBs in most samples except of the sediment from the Shima River. The higher PBDD/F concentrations in the Shima River may be attributed to the use of BFRs in the electrical and electronics industries, which posed a potential risk of dioxins on ecological system.

Optical Fiber Protection

NASA Technical Reports Server (NTRS)

1999-01-01

F&S Inc. developed and commercialized fiber optic and microelectromechanical systems- (MEMS) based instrumentation for harsh environments encountered in the aerospace industry. The NASA SBIR programs have provided F&S the funds and the technology to develop ruggedized coatings and coating techniques that are applied during the optical fiber draw process. The F&S optical fiber fabrication facility and developed coating methods enable F&S to manufacture specialty optical fiber with custom designed refractive index profiles and protective or active coatings. F&S has demonstrated sputtered coatings using metals and ceramics and combinations of each, and has also developed techniques to apply thin coatings of specialized polyimides formulated at NASA Langley Research Center. With these capabilities, F&S has produced cost-effective, reliable instrumentation and sensors capable of withstanding temperatures up to 800? C and continues building commercial sales with corporate partners and private funding. More recently, F&S has adapted the same sensing platforms to provide the rapid detection and identification of chemical and biological agents

Novel GNE mutations in Italian families with autosomal recessive hereditary inclusion-body myopathy.

PubMed

Broccolini, Aldobrando; Ricci, Enzo; Cassandrini, Denise; Gliubizzi, Carla; Bruno, Claudio; Tonoli, Emmanuel; Silvestri, Gabriella; Pescatori, Mario; Rodolico, Carmelo; Sinicropi, Stefano; Servidei, Serenella; Zara, Federico; Minetti, Carlo; Tonali, Pietro A; Mirabella, Massimiliano

2004-06-01

The most common form of autosomal recessive (AR) hereditary inclusion-body myopathy (HIBM), originally described in Persian-Jewish families, is characterized by onset in early adult life with weakness and atrophy of distal lower limb muscles, which progress proximally and relatively spare the quadriceps. AR HIBM is associated with mutations in the UDP-N-acetylglucosamine 2-epimerase/N-acetylmannosamine kinase gene (GNE) on chromosome 9p12-13. In the present study we have identified seven novel GNE mutations in patients from five unrelated Italian families with clinical and pathologic features indicative of AR HIBM. Four were missense mutations (c.1556A>G [p.N519S], c.79C>T [p.P27S], c.1798G>A [p.A600T] and c.616G>A [p.G206S]), two consisted in a single-base deletion (c.616delG [p.G206fsX4] and c.1130delT [p.I377fsX16]) and one in an intronic single-base insertion (c.1070+2dupT). These latter findings further extend the type of GNE mutations associated with HIBM. Furthermore, in one patient we also identified the c.737G>A [p.R246Q] missense mutation that corresponds to the one previously reported in a family from the Bahamas. Interestingly, in two of our families distinct mutations affected nucleotide c.616 in exon 3 (c.616delG and c.616G>A). The possibility of specific portions of the gene being more prone to mutations remains to be elucidated. Copyright 2004 Wiley-Liss, Inc.

Seizure-induced alterations in fast-spiking basket cell GABA currents modulate frequency and coherence of gamma oscillation in network simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Proddutur, Archana; Yu, Jiandong; Elgammal, Fatima S.

2013-12-15

Gamma frequency oscillations have been proposed to contribute to memory formation and retrieval. Fast-spiking basket cells (FS-BCs) are known to underlie development of gamma oscillations. Fast, high amplitude GABA synapses and gap junctions have been suggested to contribute to gamma oscillations in FS-BC networks. Recently, we identified that, apart from GABAergic synapses, FS-BCs in the hippocampal dentate gyrus have GABAergic currents mediated by extrasynaptic receptors. Our experimental studies demonstrated two specific changes in FS-BC GABA currents following experimental seizures [Yu et al., J. Neurophysiol. 109, 1746 (2013)]: increase in the magnitude of extrasynaptic (tonic) GABA currents and a depolarizing shiftmore » in GABA reversal potential (E{sub GABA}). Here, we use homogeneous networks of a biophysically based model of FS-BCs to examine how the presence of extrasynaptic GABA conductance (g{sub GABA-extra}) and experimentally identified, seizure-induced changes in g{sub GABA-extra} and E{sub GABA} influence network activity. Networks of FS-BCs interconnected by fast GABAergic synapses developed synchronous firing in the dentate gamma frequency range (40–100 Hz). Systematic investigation revealed that the biologically realistic range of 30 to 40 connections between FS-BCs resulted in greater coherence in the gamma frequency range when networks were activated by Poisson-distributed dendritic synaptic inputs rather than by homogeneous somatic current injections, which were balanced for FS-BC firing frequency in unconnected networks. Distance-dependent conduction delay enhanced coherence in networks with 30–40 FS-BC interconnections while inclusion of gap junctional conductance had a modest effect on coherence. In networks activated by somatic current injections resulting in heterogeneous FS-BC firing, increasing g{sub GABA-extra} reduced the frequency and coherence of FS-BC firing when E{sub GABA} was shunting (−74 mV), but failed to alter average FS-BC frequency when E{sub GABA} was depolarizing (−54 mV). When FS-BCs were activated by biologically based dendritic synaptic inputs, enhancing g{sub GABA-extra} reduced the frequency and coherence of FS-BC firing when E{sub GABA} was shunting and increased average FS-BC firing when E{sub GABA} was depolarizing. Shifting E{sub GABA} from shunting to depolarizing potentials consistently increased network frequency to and above high gamma frequencies (>80 Hz). Since gamma oscillations may contribute to learning and memory processing [Fell et al., Nat. Neurosci. 4, 1259 (2001); Jutras et al., J. Neurosci. 29, 12521 (2009); Wang, Physiol. Rev. 90, 1195 (2010)], our demonstration that network oscillations are modulated by extrasynaptic inhibition in FS-BCs suggests that neuroactive compounds that act on extrasynaptic GABA receptors could impact memory formation by modulating hippocampal gamma oscillations. The simulation results indicate that the depolarized FS-BC GABA reversal, observed after experimental seizures, together with enhanced spillover extrasynaptic GABA currents are likely to promote generation of focal high frequency activity associated with epileptic networks.« less

Gluten content of medications.

PubMed

Cruz, Joseph E; Cocchio, Craig; Lai, Pak Tsun; Hermes-DeSantis, Evelyn

2015-01-01

The establishment of a database for the identification of the presence of gluten in excipients of prescription medications is described. While resources are available to ascertain the gluten content of a given medication, these resources are incomplete and often do not contain a source and date of contact. The drug information service (DIS) at Robert Wood Johnson University Hospital (RWJUH) determined that directly contacting the manufacturer of a product is the best method to determine the gluten content of medications. The DIS sought to establish a resource for use within the institution and create directions for obtaining this information from manufacturers to ensure uniformity of the data collected. To determine the gluten content of a medication, the DIS analyzed the manufacturer's package insert to identify any statement indicating that the product contained gluten or inactive ingredients from known sources of gluten. If there was any question about the source of an inactive ingredient or if no information about gluten content appeared in the package insert, the manufacturer of the particular formulation of the queried medication was contacted to provide clarification. Manufacturers' responses were collected, and medications were categorized as "gluten free," "contains gluten," or "possibly contains gluten." To date, the DIS at RWJUH has received queries about 84 medications and has cataloged their gluten content. The DIS at RWJUH developed a database that categorizes the gluten status of medications, allowing clinicians to easily identify drugs that are safe for patients with celiac disease. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Increasing Flight Software Reuse with OpenSatKit

NASA Technical Reports Server (NTRS)

McComas, David C.

2018-01-01

In January 2015 the NASA Goddard Space Flight Center (GSFC) released the Core Flight System (cFS) as open source under the NASA Open Source Agreement (NOSA) license. The cFS is based on flight software (FSW) developed for 12 spacecraft spanning nearly two decades of effort and it can provide about a third of the FSW functionality for a low-earth orbiting scientific spacecraft. The cFS is a FSW framework that is portable, configurable, and extendable using a product line deployment model. However, the components are maintained separately so the user must configure, integrate, and deploy them as a cohesive functional system. This can be very challenging especially for organizations such as universities building cubesats that have minimal experience developing FSW. Supporting universities was one of the primary motivators for releasing the cFS under NOSA. This paper describes the OpenSatKit that was developed to address the cFS deployment challenges and to serve as a cFS training platform for new users. It provides a fully functional out-of-the box software system that includes NASA's cFS, Ball Aerospace's command and control system COSMOS, and a NASA dynamic simulator called 42. The kit is freely available since all of the components have been released as open source. The kit runs on a Linux platform, includes 8 cFS applications, several kit-specific applications, and built in demos illustrating how to use key application features. It also includes the software necessary to port the cFS to a Raspberry Pi and instructions for configuring COSMOS to communicate with the target. All of the demos and test scripts can be rerun unchanged with the cFS running on the Raspberry Pi. The cFS uses a 3-tiered layered architecture including a platform abstraction layer, a Core Flight Executive (cFE) middle layer, and an application layer. Similar to smart phones, the cFS application layer is the key architectural feature for users to extend the FSW functionality to meet their mission-specific requirements. The platform abstraction layer and the cFE layers go a step further than smart phones by providing a platform-agnostic Application Programmer Interface (API) that allows applications to run unchanged on different platforms. OpenSatKit can serve two significant architectural roles that will further help the adoption of the cFS and help create a community of users that can share assets. First, the kit is being enhanced to automate the integration of applications with the goal of creating a virtual cFS "App Store".. Second, a platform certification test suite can be developed that would allow users to verify the port of the cFS to a new platform. This paper will describe the current state of these efforts and future plans.

Ability of dairy cows to ensure pregnancy according to breed and genetic merit for production traits under contrasted pasture-based systems.

PubMed

Bedere, N; Disenhaus, C; Ducrocq, V; Leurent-Colette, S; Delaby, L

2017-04-01

The present study aimed to assess and measure the effects of breed, genetic merit for production traits, and feeding systems (FS) on the ability of dairy cows to ensure pregnancy through its components (fertilization, embryonic losses, recalving). An experiment was conducted over 9 yr on Normande and Holstein cows assigned to contrasted FS. Diets were based on maize silage in winter and grazing plus concentrate in spring in the high FS group, and on grass silage in winter and grazing with no concentrate during spring in the low FS group. Within breeds, cows were classified into 2 groups with similar estimated breeding values (EBV) for milk solids: cows with high EBV for milk yield were included in a milk group and those with high EBV for fat and protein contents were included in a content group. Holstein cows produced more milk throughout lactation than Normande cows (the differential was greater in the high FS group, +2,294 kg, compared with +1,280 kg in the low FS group) and lost more body condition to nadir (the differential was greater in the high FS group, -1.00 point, compared with -0.80 point in the low FS group). Within breeds, milk solids production was similar between genetic groups. Cows in the high FS group produced more milk (+2,495 kg for Holstein and +1,481 kg for Normande cows) and had a higher body condition score at nadir (+0.40 point for Holstein and +0.60 point for Normande) than cows in the low FS group. Holstein cows had a lower recalving rate than Normande cows (-19 percentage units). We found no effect of genetic group and FS on fertility of Normande cows. However, according to FS, Holstein cows in the content group exhibited different fertility failure patterns. In the low FS group, Holstein cows in the content group had more nonfertilizations or early embryo mortality (+26 percentage units at first and second services) than Holstein cows in the milk group. In the high FS group, Holstein cows in the content group had a higher proportion of late embryo mortality than in the milk group (+10 percentage units at first and second services). We observed no effect of FS on recalving rate; however, indicators of energy balance (protein content or body condition score) were positively associated with successful conception and pregnancy. This suggested a link between genetic merit for fat and protein content and lower ability of dairy cows to ensure pregnancy because of more nonfertilizations and early or late embryo mortality. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The health risk levels of different age groups of residents living in the vicinity of municipal solid waste incinerator posed by PCDD/Fs in atmosphere and soil.

PubMed

Li, Jiafu; Zhang, Ying; Sun, Tingting; Hao, Huawei; Wu, Hao; Wang, Lili; Chen, Yuxing; Xing, Limin; Niu, Zhiguang

2018-08-01

In our study, health risk levels of different age groups of residents living in the vicinity of a municipal solid waste incinerator (MSWI) posed by polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in atmosphere and soil were evaluated. The toxic equivalent concentrations of PCDD/Fs (TEQ) in surrounding atmosphere and soil of studied MSWI were 0.05-0.12 pg I-TEQ Nm -3 and 7.622-15.450 ng I-TEQ kg -1 , respectively. The PCDFs/PCDDs (F/D) values of PCDD/Fs in surrounding atmosphere of studied MSWI ranged from 0.40 to 5.90 with a mean of 1.80, suggesting that the PCDD/Fs mainly came from combustion sources and studied MSWI could be a key source of PCDD/Fs in surrounding atmosphere. The F/D ratios of PCDD/Fs in surrounding soil ranged from 0.18 to 1.81 with a mean of 0.90, suggesting combustion is not the mainly sources of PCDD/Fs in surrounding soil, and studied MSWI may have limited influence on PCDD/Fs in surrounding soil. O8CDD and 2,3,4,7,8-P5CDF could be the total PCDD/Fs and TEQ indicators in surrounding atmosphere of studied MSWI, respectively. The carcinogenic risk (CR) values of PCDD/Fs in surrounding atmosphere and soil for children, teens and adults were 1.24E-06, 9.06E-07 and 4.41E-06, respectively, suggesting that the potential cancer risk occurred but the risk was at acceptable levels for both children and adults (<1.00E-05), and the cancer risk for teens was negligible (<1.00E-06). The non-carcinogenic risk (non-CR) values of three age groups were lower than 1, indicating that no obvious non-carcinogenic effects occurred. Inhalation of air was the largest contributor of health risk (both CR and non-CR) for three age groups. In addition, a comparison of the health risk between PCDD/Fs and other emerging contaminants and traditional pollutants in soil and atmosphere was performed, which will help us have a good view of the health risk levels of PCDD/Fs in surrounding environment of MWSI. Copyright © 2018 Elsevier B.V. All rights reserved.

The effect of fibromyalgia syndrome to gravidity, parity and duration of breastfeeding; A prospective study from Turkey.

PubMed

Tulay, Koca Tuba; Emrullah, Tanrikut; Aydin, Arslan; Ciledag, Ozdemir Filiz

2016-01-01

Fibromyalgia syndrome (FS) is a chronic pain disorder usually affecting women in their fertile period of life. However, the relationship between FS and pregnancy has not been studied in depth. The effect of FS on the course of pregnancy is poorly investigated in the current literature. Here we aimed to investigate the effects of FS to menarche age, gravidity, parity and duration of breastfeeding. One hundred and eighty-seven non-pregnant females attending between March 2015-June 2015, to Malatya State Hospital Physical Medicine and Rehabilitation Outpatient Clinic, were included in this prospective study. One hundred eleven (111) of them were diagnosed with FS according to the American Rheumatology Association (ACR) 2010 criteria and were defined as group 1; group 2 comprised of seventy six (76) non-pregnant healthy volunteers. All participants were asked about their menarche age, marriage age, gravidity, parity, duration of breastfeeding by conducting a basic questionnaire survey. Patients' body mass index (BMI) were recorded. Depression parameters were evaluated by Beck Depression Scale (BDS). The average age of the patients was 39.04±9.21 (FS) and 38.47±9.65 (Control) years; first menarche age was at 13.28±1.38 (FS) and 13.59±1.54 years (Control), and marriage age was 20.1±3.62 (FS) and 20.69±3.90 years (Control), respectively. No statistically significant difference was found (p=0.598) between BMI values (FS, 27.76±4.95; Control 26.90±4.56 kg/m(2)). The results from both groups were similar in terms of gravidity, parity, and breastfeeding duration, with no statistically significant differences (p=0.252, 0.093, 0.075, respectively). The only significant difference was found in the depression parameter. The BDS results were statistically different between the groups, found higher in FS group (p=0.000). FS occurs as a result of symptoms such as mood disorder, anxiety, cognitive and sleep disorders, and also hormonal changes; no exact cause has yet been established. The syndrome usually occurs during fertile period of young female. According to the findings of our study, FS has no negative effect on the outcome of gravidity, parity, and duration of breastfeeding in Turkish women. Further studies about the effects of FS on the course of pregnancy are required.

SeaWiFS Third Anniversary Global Biosphere

NASA Technical Reports Server (NTRS)

2002-01-01

September 18,2000 is the third anniversary of the start of regular SeaWiFS operations of this remarkable planet called Earth. This SeaWiFS image is of the Global Biosphere depicting the ocean's long-term average phytoplankton chlorophyll concentration acquired between September 1997 and August 2000 combined with the SeaWiFS-derived Normalized Difference Vegetation Index (NDVI) over land during July 2000.

Emission characteristic of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) from medical waste incinerators (MWIs) in China in 2016: A comparison between higher emission levels of MWIs and lower emission levels of MWIs.

PubMed

Li, Jiafu; Lv, Zhiwei; Du, Lei; Li, Xiaonan; Hu, Xuepeng; Wang, Chong; Niu, Zhiguang; Zhang, Ying

2017-02-01

Emission characteristic of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) from 12 medical waste incinerators (MWIs) which have a total yearly capacity of 523 440 ton medical waste and accounted for 8.1% of total yearly capacity of 246 MWIs in China were studied. The congeners profile, emissions and toxic equivalent concentrations (TEQ) indicators of PCDD/Fs in stack gas from two groups of MWIs were researched, and the possible formation mechanisms of PCDD/Fs from MWIs were preliminarily discussed. The results of present study were summarized as follows. (1) The total concentrations and TEQ of PCDD/Fs in stack gas from MWIs were 0.516-122.803 ng Nm -3 and 0.031-3.463 ng I-TEQ Nm -3 , respectively. (2) 1,2,3,4,6,7,8-H7CDF, O8CDD, O8CDF and 1,2,3,4,6,7,8-H7CDD were the indicatory PCDD/Fs of MWI source, which could be used to apportion the sources of PCDD/Fs in environmental medium in China. (3) The emission factors of PCDD/Fs from MWIs ranged from 32.7 to 4900.0 ng I-TEQ ton -1 with a mean of 1923.6 ng I-TEQ ton -1 . (4) The gas emissions of PCDD/Fs from researched 12 MWIs and all of MWIs in China in 2016 were 37.742 and 465.951 mg I-TEQ year -1 , respectively. (5) 1,2,3,7,8,9-H6CDF and 1,2,3,4,7,8-H6CDF were effective TEQ indicators for the real-time monitoring of the PCDD/Fs emission. (6) The congeners profile and factor composition of PCDD/Fs in stack gas from two groups of MWIs were researched based on positive matrix factorization (PMF) model, and the possible formation mechanisms of PCDD/Fs from MWIs were preliminarily discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

High-performance and high-reliability SOT-6 packaged diplexer based on advanced IPD fabrication techniques

NASA Astrophysics Data System (ADS)

Qiang, Tian; Wang, Cong; Kim, Nam-Young

2017-08-01

A diplexer offering the advantages of compact size, high performance, and high reliability is proposed on the basis of advanced integrated passive device (IPD) fabrication techniques. The proposed diplexer is developed by combining a third-order low-pass filter (LPF) and a third-order high-pass filter (HPF), which are designed on the basis of the elliptic function prototype low-pass filter. Primary components, such as inductors and capacitors, are designed and fabricated with high Q-factor and appropriate values, and they are subsequently used to construct a compact diplexer having a chip area of 900 μm × 1100 μm (0.009 λ0 × 0.011 λ0, where λ0 is the guided wavelength). In addition, a small-outline transistor (SOT-6) packaging method is adopted, and reliability tests (including temperature, humidity, vibration, and pressure) are conducted to guarantee long-term stability and commercial success. The packaged measurement results indicate excellent RF performance with insertion losses of 1.39 dB and 0.75 dB at operation bands of 0.9 GHz and 1.8 GHz, respectively. The return loss is lower than 10 dB from 0.5 GHz to 4.0 GHz, while the isolation is higher than 15 dB from 0.5 GHz to 3.0 GHz. Thus, it can be concluded that the proposed SOT-6 packaged diplexer is a promising candidate for GSM/CDMA applications. Synthetic solution of diplexer design, RF performance optimization, fabrication process, packaging, RF response measurement, and reliability test is particularly explained and analyzed in this work.

A Mutation in UL15 of Herpes Simplex Virus 1 That Reduces Packaging of Cleaved Genomes▿

PubMed Central

Yang, Kui; Wills, Elizabeth G.; Baines, Joel D.

2011-01-01

Herpesvirus genomic DNA is cleaved from concatemers that accumulate in infected cell nuclei. Genomic DNA is inserted into preassembled capsids through a unique portal vertex. Extensive analyses of viral mutants have indicated that intact capsids, the portal vertex, and all components of a tripartite terminase enzyme are required to both cleave and package viral DNA, suggesting that DNA cleavage and packaging are inextricably linked. Because the processes have not been functionally separable, it has been difficult to parse the roles of individual proteins in the DNA cleavage/packaging reaction. In the present study, a virus bearing the deletion of codons 400 to 420 of UL15, encoding a terminase component, was analyzed. This virus, designated vJB27, failed to replicate on noncomplementing cells but cleaved concatemeric DNA to ca. 35 to 98% of wild-type levels. No DNA cleavage was detected in cells infected with a UL15-null virus or a virus lacking UL15 codons 383 to 385, comprising a motif proposed to couple ATP hydrolysis to DNA translocation. The amount of vJB27 DNA protected from DNase I digestion was reduced compared to the wild-type virus by 6.5- to 200-fold, depending on the DNA fragment analyzed, thus indicating a profound defect in DNA packaging. Capsids containing viral DNA were not detected in vJB27-infected cells, as determined by electron microscopy. These data suggest that pUL15 plays an essential role in DNA translocation into the capsid and indicate that this function is separable from its role in DNA cleavage. PMID:21880766

Multiphoton microscopy system with a compact fiber-based femtosecond-pulse laser and handheld probe

PubMed Central

Liu, Gangjun; Kieu, Khanh; Wise, Frank W.; Chen, Zhongping

2012-01-01

We report on the development of a compact multiphoton microscopy (MPM) system that integrates a compact and robust fiber laser with a miniature probe. The all normal dispersion fiber femtosecond laser has a central wavelength of 1.06 μm, pulse width of 125 fs and average power of more than 1 W. A double cladding photonic crystal fiber was used to deliver the excitation beam and to collect the two-photon signal. The hand-held probe included galvanometer-based mirror scanners, relay lenses and a focusing lens. The packaged probe had a diameter of 16 mm. Second harmonic generation (SHG) images and two-photon excited fluorescence (TPEF) images of biological tissues were demonstrated using the system. MPM images of different biological tissues acquired by the compact system which integrates an FBFP laser, an DCPCF and a miniature handheld probe. PMID:20635426

Individual versus group female-specific cognitive behavior therapy for alcohol use disorder.

PubMed

Epstein, Elizabeth E; McCrady, Barbara S; Hallgren, Kevin A; Gaba, Ayorkor; Cook, Sharon; Jensen, Noelle; Hildebrandt, Thomas; Holzhauer, Cathryn Glanton; Litt, Mark D

2018-05-01

To test group-based Female-Specific Cognitive Behavioral Therapy (G-FS-CBT) for women with Alcohol Use Disorder (AUD) against an individual Female-Specific Cognitive Behavioral Therapy (I-FS-CBT). This aims of this paper are to describe G-FS-CBT development, content, feasibility, acceptability, group process, engagement in treatment, and within- and post-treatment outcomes. Women with AUD (n=155) were randomly assigned to 12 manual-guided sessions of G-FS-CBT or I-FS-CBT; 138 women attended at least one treatment session. Women in G-FS-CBT attended fewer sessions (M=7.6) than women in I-FS-CBT (M=9.7; p<.001). Women in both conditions reported high satisfaction with the treatments. Independent coders rated high fidelity of delivery of both G-FS-CBT and I-FS-CBT. Therapeutic alliance with the therapist was high in both conditions, with I-FS-CBT being slightly but significantly higher than G-FS-CBT. In the first six weeks of treatment, women in both treatment conditions significantly reduced their percent drinking days (PDD) and percent heavy days drinking (PHD) by equivalent amounts, maintained through the rest of treatment and the 12month follow up with no treatment condition effects. Women reported significant improvement in all but one of the secondary outcomes during treatment; gains made during treatment in depression, anxiety, autonomy, and interpersonal problems were maintained during the follow-up period, while gains made during treatment in use of coping skills, self-efficacy for abstinence, self-care, and sociotropy deteriorated over follow up but remained improved compared to baseline. Findings support the feasibility, acceptability, and efficacy of a group format for female-specific CBT for AUD, a new 12-session, single gender, community friendly, group therapy with programming specifically for women. Similar, positive outcomes for individual and group treatment formats were found for drinking, mood, coping skills, self-confidence, interpersonal functioning, and self-care. Copyright © 2018. Published by Elsevier Inc.

OptoZIF Drive: a 3D printed implant and assembly tool package for neural recording and optical stimulation in freely moving mice

NASA Astrophysics Data System (ADS)

Freedman, David S.; Schroeder, Joseph B.; Telian, Gregory I.; Zhang, Zhengyang; Sunil, Smrithi; Ritt, Jason T.

2016-12-01

Objective. Behavioral neuroscience studies in freely moving rodents require small, light-weight implants to facilitate neural recording and stimulation. Our goal was to develop an integrated package of 3D printed parts and assembly aids for labs to rapidly fabricate, with minimal training, an implant that combines individually positionable microelectrodes, an optical fiber, zero insertion force (ZIF-clip) headstage connection, and secondary recording electrodes, e.g. for electromyography (EMG). Approach. Starting from previous implant designs that position recording electrodes using a control screw, we developed an implant where the main drive body, protective shell, and non-metal components of the microdrives are 3D printed in parallel. We compared alternative shapes and orientations of circuit boards for electrode connection to the headstage, in terms of their size, weight, and ease of wire insertion. We iteratively refined assembly methods, and integrated additional assembly aids into the 3D printed casing. Main results. We demonstrate the effectiveness of the OptoZIF Drive by performing real time optogenetic feedback in behaving mice. A novel feature of the OptoZIF Drive is its vertical circuit board, which facilities direct ZIF-clip connection. This feature requires angled insertion of an optical fiber that still can exit the drive from the center of a ring of recording electrodes. We designed an innovative 2-part protective shell that can be installed during the implant surgery to facilitate making additional connections to the circuit board. We use this feature to show that facial EMG in mice can be used as a control signal to lock stimulation to the animal’s motion, with stable EMG signal over several months. To decrease assembly time, reduce assembly errors, and improve repeatability, we fabricate assembly aids including a drive holder, a drill guide, an implant fixture for microelectode ‘pinning’, and a gold plating fixture. Significance. The expanding capability of optogenetic tools motivates continuing development of small optoelectric devices for stimulation and recording in freely moving mice. The OptoZIF Drive is the first to natively support ZIF-clip connection to recording hardware, which further supports a decrease in implant cross-section. The integrated 3D printed package of drive components and assembly tools facilities implant construction. The easy interfacing and installation of auxiliary electrodes makes the OptoZIF Drive especially attractive for real time feedback stimulation experiments.

Characteristic accumulation of PCDD/Fs in pine needles near an MSWI and emission levels of the MSWI in Pearl River Delta: A case study.

PubMed

Chen, Pei; Xiao, Xiao; Mei, Jun; Cai, Ying; Tang, Yuhui; Peng, Ping'an

2017-08-01

Pine needle samples were collected near a municipal solid waste incinerator (MSWI) in Pearl River Delta, southern China, as well as the stack gas and dust samples of the MSWI were simultaneously collected. Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) were analyzed following the USEPA Method 1613B. The concentration of PCDD/Fs in the pine needles (137-625 ng/kg, 25-51 ng I-TEQ/kg) is the highest level ever detected in China. Congener profile comparison and principal component analysis (PCA) confirmed the MSWI as an important emission source of environmental PCDD/Fs. The PCDD/Fs in the pine needles mainly depended on the atmospheric concentration, exposure time and also the wind direction. The accumulation of PCDD/Fs in this species did not occur at a steady rate, and the total concentrations covered up the actual photolysis information. Gas-phase partitioning of compounds in the atmosphere was the dominant process through which PCDD/Fs were adsorbed onto the pine needle surface in contrast with particle-phase deposition, and subsequent environmental behavior varied between the congeners. Photo-degradation was the major transformation process as PCDD/Fs were adsorbed onto the pine needle surfaces. Higher chlorinated PCDD/Fs were more recalcitrant to photo-degradation than those that were less chlorinated, and PCDDs were more resistant to photo-degradation than PCDFs. On the other hand, the strong ability of lipid-rich pine needles to accumulate dioxin compounds indicates they can be used as the absorption sink of PCDD/Fs in heavily polluted areas because it is easier to dispose of pine needles than it is to clean contaminated air. Copyright © 2017 Elsevier Ltd. All rights reserved.

Repeated exposure to immobilization or two different footshock intensities reveals differential adaptation of the hypothalamic-pituitary-adrenal axis.

PubMed

Rabasa, Cristina; Muñoz-Abellán, Cristina; Daviu, Núria; Nadal, Roser; Armario, Antonio

2011-05-03

Factors involved in adaptation to repeated stress are not well-characterized. For instance, acute footshock (FS) of high intensity appears to be less severe than immobilization (IMO) in light of the speed of post-stress recovery of the hypothalamic-pituitary-adrenal (HPA) axis and other physiological variables. However, repeated exposure to IMO consistently resulted in reduction of the HPA response to the same stressor (adaptation), whereas failure to adapt has been usually reported after FS. Thus, in the present work we directly compared the activation of HPA axis and other physiological changes in response to both acute and repeated exposure to IMO and two intensities of FS (medium and high) in adult male rats. Control rats were exposed to the FS boxes but they did not receive shocks. Daily repeated exposure to IMO resulted in significant adaptation of the overall ACTH and corticosterone responses to the stressor. Such a reduction was also observed with repeated exposure to FS boxes and FS-medium, whereas repeated exposure to FS-high only resulted in a small reduction of the corticosterone response during the post-stress period. This suggests that some properties of FS-high make adaptation to it difficult. Interestingly, overall changes in food intake and body weight gain throughout the week of exposure to the stressors reveal a greater impact of IMO than FS-high, indicating that factors other than the intensity of a stressor, at least when evaluated in function of the above physiological variables, can influence HPA adaptation. Since FS exposure is likely to cause more pain than IMO, activation of nociceptive signals above a certain level may negatively affect HPA adaptation to repeated stressors. Copyright © 2011 Elsevier Inc. All rights reserved.

Influence of long-range atmospheric transportation (LRAT) on mono-to octa-chlorinated PCDD/Fs levels and distributions in soil around Qinghai Lake, China.

PubMed

Han, Ying; Liu, Wenbin; Hansen, Hans Chr Bruun; Chen, Xuebin; Liao, Xiao; Li, Haifeng; Wang, Mengjing; Yan, Nan

2016-08-01

Long-range atmospheric transportation (LRAT) of persistent organic pollutants followed by their deposition in cold, arid regions is of wide concern. This problem occurs at Qinghai Lake in the northeastern Tibetan Plateau, a sparsely populated area with extreme weather conditions and little current or historical anthropogenic pollution. The concentrations and distribution patterns of the mono-to octa-chlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) congeners in surface soil samples collected from around Qinghai Lake were quantified. Concentration differences between low-(mono-to tri-) chlorinated PCDD/Fs and high-(tetra-to octa-) chlorinated PCDD/Fs were measured. High PCDD/F levels were detected, with total concentrations of 15,108 ± 6323 pg/g for the 27 PCDD/F congeners and 15,104 ± 6324 pg/g for the low-chlorinated PCDD/Fs. The concentrations of 17 2,3,7,8-substituted PCDD/Fs were only 3.1 ± 4.4 pg/g and the corresponding international toxicity equivalency (I-TEQ) was 0.11 ± 0.22 pg I-TEQ/g. Given their higher vapor pressures and lower boiling points, low-chlorinated PCDD/Fs, were predominantly gaseous, whereas high-chlorinated PCDD/Fs were predominantly solid, indicating that there is a higher potential for long-range transport of low-chlorinated PCDD/Fs. Overall, because of their high LRAT potential, low-chlorinated PCDD/Fs may pose a greater risk to local ecosystems in cold, remote areas than high-chlorinated PCDD/Fs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Clinical differences in children with autism spectrum disorder with and without food selectivity.

PubMed

Postorino, Valentina; Sanges, Veronica; Giovagnoli, Giulia; Fatta, Laura Maria; De Peppo, Lavinia; Armando, Marco; Vicari, Stefano; Mazzone, Luigi

2015-09-01

Several studies have described the atypical eating behaviors frequently occurring in children with Autism Spectrum Disorder (ASD), and food selectivity is the most frequent of these problems. The everyday management of mealtime behaviors among children with ASD can have a negative impact on family routines and become a significant stressor for families. However, much remains unknown about why food selectivity is so prevalent among individuals with ASD. The objective of this study was to investigate clinical and behavioral features in individuals with ASD with the aim of identifying distinctive clinical profiles in children with and without food selectivity. A total of 158 children with ASD were enrolled in this study: 79 participants with food selectivity (FS) were age and sex matched with 79 participants without food selectivity (No FS). All participants and their parents completed a battery of psychological tests for a comprehensive evaluation of ASD symptoms, cognitive abilities, adaptive skills, behavioral problems and parental stress level. No statistically significant difference on gastrointestinal symptoms and growth adequacy was found between the FS group and the No FS group. Overall, the FS group showed significantly higher rates of ASD symptoms as compared to the No FS group in the questionnaires completed by parents. Furthermore, parents of the FS group reported significantly higher levels of parental stress and a larger degree of their children's behavioral problems as compared to the No FS group. Finally, there were no differences between the FS and the No FS group on any adaptive skill domain. Our findings suggest that the identification of distinctive clinical and behavioral patterns in children with ASD and food selectivity is a crucial issue for parents and therapists in the daily management. Copyright © 2015 Elsevier Ltd. All rights reserved.

Algorithm for automatic forced spirometry quality assessment: technological developments.

PubMed

Melia, Umberto; Burgos, Felip; Vallverdú, Montserrat; Velickovski, Filip; Lluch-Ariet, Magí; Roca, Josep; Caminal, Pere

2014-01-01

We hypothesized that the implementation of automatic real-time assessment of quality of forced spirometry (FS) may significantly enhance the potential for extensive deployment of a FS program in the community. Recent studies have demonstrated that the application of quality criteria defined by the ATS/ERS (American Thoracic Society/European Respiratory Society) in commercially available equipment with automatic quality assessment can be markedly improved. To this end, an algorithm for assessing quality of FS automatically was reported. The current research describes the mathematical developments of the algorithm. An innovative analysis of the shape of the spirometric curve, adding 23 new metrics to the traditional 4 recommended by ATS/ERS, was done. The algorithm was created through a two-step iterative process including: (1) an initial version using the standard FS curves recommended by the ATS; and, (2) a refined version using curves from patients. In each of these steps the results were assessed against one expert's opinion. Finally, an independent set of FS curves from 291 patients was used for validation purposes. The novel mathematical approach to characterize the FS curves led to appropriate FS classification with high specificity (95%) and sensitivity (96%). The results constitute the basis for a successful transfer of FS testing to non-specialized professionals in the community.

Transient increase of interleukin-1β after prolonged febrile seizures promotes adult epileptogenesis through long-lasting upregulating endocannabinoid signaling

PubMed Central

Feng, Bo; Tang, Yangshun; Chen, Bin; Xu, Cenglin; Wang, Yi; Dai, Yunjian; Wu, Dengchang; Zhu, Junmin; Wang, Shuang; Zhou, Yudong; Shi, Liyun; Hu, Weiwei; Zhang, Xia; Chen, Zhong

2016-01-01

It remains unclear how infantile febrile seizures (FS) enhance adult seizure susceptibility. Here we showed that the transient increase of interleukin-1β (IL-1β) after prolonged FS promoted adult seizure susceptibility, which was blocked by interleukin-1 receptor antagonist (IL-1Ra) within a critical time window. Postnatal administered IL-1β alone mimicked the effect of FS on adult seizure susceptibility. IL-1R1 knockout mice were not susceptible to adult seizure after prolonged FS or IL-1β treatment. Prolonged FS or early-life IL-1β treatment increased the expression of cannabinoid type 1 receptor (CB1R) for over 50 days, which was blocked by IL-1Ra or was absent in IL-1R1 knockout mice. CB1R antagonist, knockdown and endocannabinoid synthesis inhibitor abolished FS or IL-1β-enhanced seizure susceptibility. Thus, this work identifies a pathogenic role of postnatal IL-1β/IL-1R1 pathway and subsequent prolonged prominent increase of endocannabinoid signaling in adult seizure susceptibility following prolonged FS, and highlights IL-1R1 as a potential therapeutic target for preventing the development of epilepsy after infantile FS. PMID:26902320

Observation of sub-100-fs optical response from spin-coated films of squarylium dye J aggregates

NASA Astrophysics Data System (ADS)

Furuki, Makoto; Tian, Minquan; Sato, Yasuhiro; Pu, Lyong Sun; Kawashima, Hitoshi; Tatsuura, Satoshi; Wada, Osamu

2001-04-01

For spin-coated films of squarylium dye J aggregates, ultrafast nonlinear optical responses were investigated by pump-probe measurements. By using a broadband mode-locked titanium:sapphire laser, we succeeded in observing the optical response with a time resolution of better than 60 fs. Time-resolved transmission data are shown for different excitation wavelengths, resonant to the excitonic absorption band and off-resonant. Relaxation times of the absorption saturation were evaluated to be 140 fs (fast component) and 950 fs (slow component) in the case of resonant excitation and 98 fs in the case of off-resonant excitation.

Polybrominated, polychlorinated and monobromo-polychlorinated dibenzo-p-dioxins/dibenzofurans and dioxin-like polychlorinated biphenyls in marine surface sediments from Hong Kong and Korea.

PubMed

Terauchi, Hidenori; Takahashi, Shin; Lam, Paul K S; Min, Byung-Yoon; Tanabe, Shinsuke

2009-03-01

In this study we investigated occurrences and distribution patterns of dioxin-related compounds (DRCs) such as polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs), polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), monobromo-polychlorinated dibenzo-p-dioxins/dibenzofurans (MoBPCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in marine surface sediments collected from the coastal waters of Hong Kong and Korea. In most sampling sites, concentrations of PCDDs were the highest, followed by DL-PCBs, PCDFs, PBDFs, PBDDs, MoBPCDDs and MoBPCDFs in this order. Levels of PBDD/Fs were generally 1-2 orders of magnitude lower than chlorinated analogues. Levels of PCDDs are higher than PCDFs in Hong Kong while levels of PBDFs are higher than PBDDs in Korea (p<0.05). Report of PBDD/Fs and MoBPCDD/Fs in sediments from East Asian countries is novel and original. Environmental levels of PBDD/Fs are supposed to start increasing in accordance with rising production, use and disposal of brominated flame retardants (BFRs) and recycling processes of e-waste in Asian developing countries.

Increasing Flight Software Reuse with OpenSatKit

NASA Technical Reports Server (NTRS)

McComas, David

2018-01-01

In January 2015 the NASA Goddard Space Flight Center (GSFC) released the Core Flight System (cFS) as open source under the NASA Open Source Agreement (NOSA) license. The cFS is based on flight software (FSW) developed for 12 spacecraft spanning nearly two decades of effort and it can provide about a third of the FSW functionality for a low-earth orbiting scientific spacecraft. The cFS is a FSW framework that is portable, configurable, and extendable using a product line deployment model. However, the components are maintained separately so the user must configure, integrate, and deploy them as a cohesive functional system. This can be very challenging especially for organizations such as universities building cubesats that have minimal experience developing FSW. Supporting universities was one of the primary motivators for releasing the cFS under NOSA. This paper describes the OpenSatKit that was developed to address the cFS deployment challenges and to serve as a cFS training platform for new users. It provides a fully functional out-of-the box software system that includes NASA's cFS, Ball Aerospaceâ€"TM"s command and control system COSMOS, and a NASA dynamic simulator called 42. The kit is freely available since all of the components have been released as open source. The kit runs on a Linux platform, includes 8 cFS applications, several kit-specific applications, and built in demos illustrating how to use key application features. It also includes the software necessary to port the cFS to a Raspberry Pi and instructions for configuring COSMOS to communicate with the target. All of the demos and test scripts can be rerun unchanged with the cFS running on the Raspberry Pi. The cFS uses a 3-tiered layered architecture including a platform abstraction layer, a Core Flight Executive (cFE) middle layer, and an application layer. Similar to smart phones, the cFS application layer is the key architectural feature for userâ€"TM"s to extend the FSW functionality to meet their mission-specific requirements. The platform abstraction layer and the cFE layers go a step further than smart phones by providing a platform-agnostic Application Programmer Interface (API) that allows applications to run unchanged on different platforms. OpenSatKit can serve two significant architectural roles that will further help the adoption of the cFS and help create a community of users that can share assets. First, the kit is being enhanced to automate the integration of applications with the goal of creating a virtual cFS 'App Store'. Second, a platform certification test suite can be developed that would allow users to verify the port of the cFS to a new platform. This paper will describe the current state of these efforts and future plans.

Ultrafast gigantic photo-response in charge-ordered organic salt (EDO-TTF)2PF6 on 10-fs time scales

DOE Office of Scientific and Technical Information (OSTI.GOV)

Itatani, J.; Rini, M.; Cavalleri, A.

2008-08-01

The initial dynamics of photo-induced phase transition in charge-ordered organic salt (EDO-TTF){sub 2}PF{sub 6} was investigated using 10-fs near-infrared laser pulses. We observed sub-20-fs gigantic photo-responses (|{Delta}R/R|>100%) due to intra-molecular vibration and a clear signature of a structural bottleneck ({approx}50 fs) for the first time.

The Effect of Lactic Acid Bacteria-fermented Soybean Milk Products on Carrageenan-induced Tail Thrombosis in Rats

PubMed Central

KAMIYA, Seitaro; OGASAWARA, Masayoshi; ARAKAWA, Masayuki; HAGIMORI, Masayori

2013-01-01

Thrombosis is characterized by congenital and acquired procatarxis. Lactic acid bacteria-fermented soybean milk products (FS-LAB) inhibit hepatic lipid accumulation and prevent atherosclerotic plaque formation. However, the therapeutic efficacy of FS-LAB against thrombosis has yet to be investigated. In this study, FS-LAB were administered subcutaneously into the tails of rats, with the subsequent intravenous administration of κ-carrageenan 12 hr after the initial injection. In general, administration of κ-carrageenan induces thrombosis. The length of the infarcted tail regions was significantly shorter in the rats administered a single-fold or double-fold concentration of the FS-LAB solution compared with the region in control rats. Therefore, FS-LAB exhibited significant antithrombotic effects. Our study is the first to characterize the properties of FS-LAB and, by testing their efficacy on an in vivo rat model of thrombosis, demonstrate the potency of their antithrombotic effect. PMID:24936368

[Concentrations, distribution characteristics and electron beam radiolysis degradation of PCDD/Fs in waste water from a paper mill].

PubMed

Qing, Xian; Huang, Jin-Qiong; Yu, Xiao-Wei; Zhang, Su-Kun; Yang, Yan-Yan; Ren, Ming-Zhong; Wen, Yu-Long

2014-07-01

Concentrations and distribution characteristics of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and dibenzofurans (2,3,7,8-PCDD/Fs) were analyzed in waste water from a paper mill. And concentrations of 2,3,7,8-PCDD/Fs in waste water before and after electron beam irradiation with different doses were compared. The feasibility, mechanism and rates of 2,3,7,8-PCDD/Fs degradation were discussed. The PCDD/Fs concentrations and corresponding I-TEQ (toxic equivalent quantity) values were 239 pg x L(-1) and 41.0 pg x L(-1), respectively, in the waste water. The concentrations of total 2,3,7,8-PCDD/Fs decreased after electron beam radiolysis at a dose of 30 kGy and 60 kGy with degradation rates of 5.27% and 23.6%, respectively.

Fibrin chain cross-linking, fibrinolysis, and in vivo sealing efficacy of differently structured fibrin sealants.

PubMed

Hedrich, Hans Christian; Simunek, Manuela; Reisinger, Sonja; Ferguson, James; Gulle, Heinz; Goppelt, Andreas; Redl, Heinz

2012-08-01

In this study, we compared the sealing characteristics and efficacy of a fibrin sealant with reduced plasminogen (FS-rplg) and a fibrin sealant with aprotinin as a fibrinolysis inhibitor (FS-apr). The relevant sealing characteristics including clot structure, fibrin chain cross-linking, and clot lysis were tested in the laboratory. The sealing efficacy was then investigated in a follow-up animal model to determine differences in the in vivo sealing properties. A total of 46 animals were available for the final analysis with 23 animals in each treatment arm. In conclusion, we saw differences in vitro between FS-rplg and FS-apr in ultrastructure and α-chain cross-linking rates as well as in the rate of fibrinolysis. These differences may explain the significantly enhanced sealing efficacy in FS-apr compared to FS-rplg shown in vivo in a rabbit intestinal model. Copyright © 2012 Wiley Periodicals, Inc.

SeaWiFS Technical Report Series. Volume 8: Proceedings of the First SeaWiFS Science Team Meeting

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Esaias, Wayne E.; Rexrode, Lisa A.; Firestone, Elaine R. (Editor)

1993-01-01

The first meeting of the SeaWiFS Science Team was held in preparation for a launch of the SeaStar satellite carrying the SeaWiFS ocean color scanner in the October 1993 time frame. The primary goals of the meeting were: (1) to brief Science Team members, agency representatives, and international collaborators on the status of the mission by representatives from the SeaWiFS Project, the prime contractor Orbital Sciences Corporation (OSC), and the Goddard Distributed Active Archive Center (DAAC); (2) to provide for briefings on the science investigations undertaken by Science Team members and to solicit comments and recommendations from meeting attendees for improvements; and (3) to improve coordination of research and validation activities both inter- and intra-nationally with respect to collection, validation, and application of ocean color data from the SeaWiFS mission. Presentations and recommendations are summarized.

Progress in performance enhancement methods for capacitive silicon resonators

NASA Astrophysics Data System (ADS)

Van Toan, Nguyen; Ono, Takahito

2017-11-01

In this paper, we review the progress in recent studies on the performance enhancement methods for capacitive silicon resonators. We provide information on various fabrication technologies and design considerations that can be employed to improve the performance of capacitive silicon resonators, including low motional resistance, small insertion loss, and high quality factor (Q). This paper contains an overview of device structures and working principles, fabrication technologies consisting of hermetic packaging, deep reactive-ion etching and neutral beam etching, and design considerations including mechanically coupled, movable electrode structures and piezoresistive heat engines.

Board-level optical clock signal distribution using Si CMOS-compatible polyimide-based 1- to 48-fanout H-tree

NASA Astrophysics Data System (ADS)

Wu, Linghui; Bihari, Bipin; Gan, Jianhua; Chen, Ray T.; Tang, Suning

1998-08-01

Si-CMOS compatible polymer-based waveguides for optoelectronic interconnects and packaging have been fabricated and characterized. A 1-to-48 fanout optoelectronic interconnection layer (OIL) structure based on Ultradel 9120/9020 for the high-speed massive clock signal distribution for a Cray T-90 supercomputer board has been constructed. The OIL employs multimode polymeric channel waveguides in conjunction with surface-normal waveguide output coupler and 1-to-2 splitter. A total insertion loss of 7.98 dB at 850 nm was measured experimentally.

Apollo 17

NASA Technical Reports Server (NTRS)

Garrett, David

1972-01-01

This is the Press Kit that was given to the various media outlets that were interested in covering the Apollo 17 mission. It includes information about the moon, lunar science, concentrating on the planned mission. The kit includes information about the flight, and the trajectory, planned orbit insertion maneuvers, the extravehicular mission events, a comparison with the Apollo 16, a map of the lunar surface, and the surface activity, information about the Taurus-Littrow landing site, the planned science experiments, the power source for the experiment package and diagrams of some of the instrumentation that was used to perform the experiments.

Superlattice structure modeling and simulation of High Electron Mobility Transistor for improved performance

NASA Astrophysics Data System (ADS)

Munusami, Ravindiran; Yakkala, Bhaskar Rao; Prabhakar, Shankar

2013-12-01

Magnetic tunnel junction were made by inserting the magnetic materials between the source, channel and the drain of the High Electron Mobility Transistor (HEMT) to enhance the performance. Material studio software package was used to design the superlattice layers. Different cases were analyzed to optimize the performance of the device by placing the magnetic material at different positions of the device. Simulation results based on conductivity reveals that the device has a very good electron transport due to the magnetic materials and will amplify very low frequency signals.

Cooperative heteroassembly of the adenoviral L4-22K and IVa2 proteins onto the viral packaging sequence DNA.

PubMed

Yang, Teng-Chieh; Maluf, Nasib Karl

2012-02-21

Human adenovirus (Ad) is an icosahedral, double-stranded DNA virus. Viral DNA packaging refers to the process whereby the viral genome becomes encapsulated by the viral particle. In Ad, activation of the DNA packaging reaction requires at least three viral components: the IVa2 and L4-22K proteins and a section of DNA within the viral genome, called the packaging sequence. Previous studies have shown that the IVa2 and L4-22K proteins specifically bind to conserved elements within the packaging sequence and that these interactions are absolutely required for the observation of DNA packaging. However, the equilibrium mechanism for assembly of IVa2 and L4-22K onto the packaging sequence has not been determined. Here we characterize the assembly of the IVa2 and L4-22K proteins onto truncated packaging sequence DNA by analytical sedimentation velocity and equilibrium methods. At limiting concentrations of L4-22K, we observe a species with two IVa2 monomers and one L4-22K monomer bound to the DNA. In this species, the L4-22K monomer is promoting positive cooperative interactions between the two bound IVa2 monomers. As L4-22K levels are increased, we observe a species with one IVa2 monomer and three L4-22K monomers bound to the DNA. To explain this result, we propose a model in which L4-22K self-assembly on the DNA competes with IVa2 for positive heterocooperative interactions, destabilizing binding of the second IVa2 monomer. Thus, we propose that L4-22K levels control the extent of cooperativity observed between adjacently bound IVa2 monomers. We have also determined the hydrodynamic properties of all observed stoichiometric species; we observe that species with three L4-22K monomers bound have more extended conformations than species with a single L4-22K bound. We suggest this might reflect a molecular switch that controls insertion of the viral DNA into the capsid.

Protective effects of Forsythia suspense extract with antioxidant and anti-inflammatory properties in a model of rotenone induced neurotoxicity.

PubMed

Zhang, Shuai; Shao, Si-Yuan; Song, Xiu-Yun; Xia, Cong-Yuan; Yang, Ya-Nan; Zhang, Pei-Cheng; Chen, Nai-Hong

2016-01-01

The present study investigated the neuroprotective effects of Forsythia suspense extract in a rotenone-induced neurotoxic model. FS8, one of the herbal extracts, markedly protected PC12 cells against rotenone toxicity and was selected for the in vivo study. Gavage administration of FS8 (50 and 200mg/kg, but not 10mg/kg) for 25 days significantly improved the behavior function, decreased the loss of dopaminergic neurons in substantia nigra (SN), and maintained the level of dopamine in striatum after unilateral infusion of rotenone in SN. Wherein, the protective effects of FS8 at the dose of 200mg/kg were better than selegiline. Further study indicated the excellent antioxidant activity of FS8 on the 5th and 21st days after intranigral injection of rotenone. Moreover, FS8 could inhibit microglia activity and accumulation in SN, and obviously decreased the expression of pro-inflammatory molecules (IL-6, TNF-α, iNOS and COX-2), which indicated the anti-inflammatory effects of FS8. In the PI3K/Akt/NF-κB and MAPK pathways, FS8 significantly down-regulated the protein expression of p-PI3K, p-Akt, p-IκB, p-P65, cleaved Caspase 8, p-p38 and p-JNK but not p-mTOR, cleaved Caspase 3 and p-ERK. Therefore, FS8 protected dopamine neurons against rotenone toxicity via antioxidant and anti-inflammatory effects, which suggested the promising application of FS8 in the prevention and treatment of Parkinson disease. Copyright © 2015 Elsevier Inc. All rights reserved.

Intraoperative frozen section assessment of pelvic lymph nodes during radical prostatectomy is of limited value.

PubMed

Song, Jie; Li, Mei; Zagaja, Gregory P; Taxy, Jerome B; Shalhav, Arieh L; Al-Ahmadie, Hikmat A

2010-11-01

To evaluate the accuracy of frozen section (FS) assessment of pelvic lymph nodes (PLNs) during radical prostatectomy (RP) in a large contemporary cohort; and to analyse the contribution of FS to surgical decision making in this setting. During a 4-year period at a single institution, RPs with PLN dissection (PLND) were reviewed. The number and size of the PLNs, and the size of metastases were measured. FS was performed on 349 bilateral PLNDs. Overall, 28 (8%) cases were positive for metastasis, 11 of which were detected by FS (39%). The 17 false negatives, all of which contained metastases smaller than 5 mm, were due to failure to identify and freeze the positive PLNs (11), failure to section at the level of the metastatic tumour (four), or interpretative error (two). The sensitivity was not affected by the number of sampled nodes. The size of metastasis was the determining factor for the accuracy of FS, with metastases of ≥ 5 mm having a sensitivity of 100%, and metastases of < 5 mm having a sensitivity of 10%. Among the 11 true positives, RP was aborted in eight cases and continued in three. During the same period, 261 PLNDs were performed without FS, and 18 (6.9%) had metastases. FS is highly accurate in detecting large, grossly evident metastases, but performs poorly on micrometastases. It is recommended that a two-step approach applied to routine FS starting with a careful gross examination followed by FS for only grossly suspicious PLNs. © 2010 THE AUTHORS. JOURNAL COMPILATION © 2010 BJU INTERNATIONAL.

Food safety security: a new concept for enhancing food safety measures.

PubMed

Iyengar, Venkatesh; Elmadfa, Ibrahim

2012-06-01

The food safety security (FSS) concept is perceived as an early warning system for minimizing food safety (FS) breaches, and it functions in conjunction with existing FS measures. Essentially, the function of FS and FSS measures can be visualized in two parts: (i) the FS preventive measures as actions taken at the stem level, and (ii) the FSS interventions as actions taken at the root level, to enhance the impact of the implemented safety steps. In practice, along with FS, FSS also draws its support from (i) legislative directives and regulatory measures for enforcing verifiable, timely, and effective compliance; (ii) measurement systems in place for sustained quality assurance; and (iii) shared responsibility to ensure cohesion among all the stakeholders namely, policy makers, regulators, food producers, processors and distributors, and consumers. However, the functional framework of FSS differs from that of FS by way of: (i) retooling the vulnerable segments of the preventive features of existing FS measures; (ii) fine-tuning response systems to efficiently preempt the FS breaches; (iii) building a long-term nutrient and toxicant surveillance network based on validated measurement systems functioning in real time; (iv) focusing on crisp, clear, and correct communication that resonates among all the stakeholders; and (v) developing inter-disciplinary human resources to meet ever-increasing FS challenges. Important determinants of FSS include: (i) strengthening international dialogue for refining regulatory reforms and addressing emerging risks; (ii) developing innovative and strategic action points for intervention {in addition to Hazard Analysis and Critical Control Points (HACCP) procedures]; and (iii) introducing additional science-based tools such as metrology-based measurement systems.

The Earth's Biosphere

NASA Technical Reports Server (NTRS)

2002-01-01

In the last five years, scientists have been able to monitor our changing planet in ways never before possible. The Sea-viewing Wide Field-of-View Sensor (SeaWiFS), aboard the OrbView-2 satellite, has given researchers an unprecedented view of the biological engine that drives life on Earth-the countless forms of plants that cover the land and fill the oceans. 'There is no question the Earth is changing. SeaWiFS has enabled us, for the first time, to monitor the biological consequences of that change-to see how the things we do, as well as natural variability, affect the Earth's ability to support life,' said Gene Carl Feldman, SeaWiFS project manager at NASA's Goddard Space Flight Center, Greenbelt, Md. SeaWiFS data, based on continuous daily global observations, have helped scientists make a more accurate assessment of the oceans' role in the global carbon cycle. The data provide a key parameter in a number of ecological and environmental studies as well as global climate-change modeling. The images of the Earth's changing land, ocean and atmosphere from SeaWiFS have documented many previously unrecognized phenomena. The image above shows the global biosphere from June 2002 measured by SeaWiFS. Data in the oceans is chlorophyll concentration, a measure of the amount of phytoplankton (microscopic plants) living in the ocean. On land SeaWiFS measures Normalized Difference Vegetation Index, an indication of the density of plant growth. For more information and images, read: SeaWiFS Sensor Marks Five Years Documenting Earth'S Dynamic Biosphere Image courtesy SeaWiFS project and copyright Orbimage.

[Molecular pathogenesis of Waardenburg syndrome type II resulting from SOX10 gene mutation].

PubMed

Zhang, Hua; Chen, Hongsheng; Feng, Yong; Qian, Minfei; Li, Jiping; Liu, Jun; Zhang, Chun

2016-08-01

To explore the molecular mechanism of Waardenburg syndrome type II (WS2) resulting from SOX10 gene mutation E248fs through in vitro experiment. 293T cells were transiently transfected with wild type (WT) SOX10 and mutant type (MT) E248fs plasmids. The regulatory effect of WT/MT SOX10 on the transcriptional activity of MITF gene and influence of E248fs on WT SOX10 function were determined with a luciferase activity assay. The DNA binding capacity of the WT/MT SOX10 with the promoter of the MITF gene was determined with a biotinylated double-stranded oligonucleotide probe containing the SOX10 binding sequence cattgtc to precipitate MITF and E248fs, respectively. The stability of SOX10 and E248fs were also analyzed. As a loss-of-function mutation, the E248fs mutant failed to transactivate the MITF promoter as compared with the WT SOX10 (P<0.01), which also showed a dominant-negative effect on WT SOX10. The WT SOX10 and E248fs mutant were also able to bind specifically to the cattgtc motif in the MITF promoter, whereas E248fs had degraded faster than WT SOX10. Despite the fact that the E248fs has a dominant-negative effect on SOX10, its reduced stability may down-regulate the transcription of MITF and decrease the synthesis of melanin, which may result in haploinsufficiency of SOX10 protein and cause the milder WS2 phenotype.

VizieR Online Data Catalog: Magellan/M2FS spectroscopy of Abell 267 (Tucker+, 2017)

NASA Astrophysics Data System (ADS)

Tucker, E.; Walker, M. G.; Mateo, M.; Olszewski, E. W.; Bailey, J. I.; Crane, J. D.; Shectman, S. A.

2018-02-01

We select targets for Michigan/Magellan Fiber System (M2FS) observations by identifying galaxies detected in SDSS images (Data Release 12; Alam et al.2015, Cat. V/147) that are projected along the line of sight to Abell 267 and are likely to be quiescent cluster members. We observed 223 individual galaxy spectra on 2013 November 30 on the Clay Magellan Telescope using M2FS. We used the low-resolution grating on M2FS and chose a coverage range of 4600-6400Å with a resolution of R~2000. The detector used with M2FS consists of two 4096*4112 pixel CCDs. (1 data file).

Greek Wildfires

NASA Technical Reports Server (NTRS)

2002-01-01

Hot, dry weather has contributed to a string of fires that burned in Greece during the first two weeks of July 2000. Smoke from one of these fires is streaming across Greece and out into the Aegean Sea in this image taken July 13, 2000, by the Sea-viewing Wide Field of view Sensor (SeaWiFS). For more about SeaWiFS, visit the SeaWiFS home page. Provided by the SeaWiFS Project, NASA/Goddard Space Flight Center, and ORBIMAGE

SeaWiFS technical report series. Volume 5: Ocean optics protocols for SeaWiFS validation

NASA Technical Reports Server (NTRS)

Mueller, James L.; Austin, Roswell W.; Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor)

1992-01-01

Protocols are presented for measuring optical properties, and other environmental variables, to validate the radiometric performance of the Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and to develop and validate bio-optical algorithms for use with SeaWiFS data. The protocols are intended to establish foundations for a measurement strategy to verify the challenging SeaWiFS accuracy goals of 5 percent in water-leaving radiances and 35 percent in chlorophyll alpha concentration. The protocols first specify the variables which must be measured, and briefly review rationale. Subsequent chapters cover detailed protocols for instrument performance specifications, characterizing and calibration instruments, methods of making measurements in the field, and methods of data analysis. These protocols were developed at a workshop sponsored by the SeaWiFS Project Office (SPO) and held at the Naval Postgraduate School in Monterey, California (9-12 April, 1991). This report is the proceedings of that workshop, as interpreted and expanded by the authors and reviewed by workshop participants and other members of the bio-optical research community. The protocols are a first prescription to approach unprecedented measurement accuracies implied by the SeaWiFS goals, and research and development are needed to improve the state-of-the-art in specific areas. The protocols should be periodically revised to reflect technical advances during the SeaWiFS Project cycle.

An Assessment of SeaWiFS and MODIS Ocean Coverage

NASA Technical Reports Server (NTRS)

Woodward, Robert H.; Gregg, Watson W.

1998-01-01

Ocean coverages of SeaWiFS and MODIS were assessed for three seasons by considering monthly mean values of surface winds speeds and cloud cover. Mean and maximum coverages combined SeaWiFS and MODIS by considering combined coverages for ten-degree increments of the MODIS orbital mean anomaly. From this analysis the mean and maximum combined coverages for SeaWiFS and MODIS were determined for one and four-day periods for spring, summer, and winter seasons. Loss of coverage due to Sun glint and cloud cover were identified for both the individual and combined cases. Our analyses indicate that MODIS will enhance ocean coverage for all three seasons examined. ne combined SeaWiFS/MODIS show an increase of coverage of 42.2% to 48.7% over SeaWiFS alone for the three seasons studied; the increase in maximum one day coverage ranges from 47.5% to 52.0%. The increase in four-day coverage for the combined case ranged from 31.0% to 35.8% for mean coverage and 33.1 % to 39.2% for maximum coverage. We computed meridional distributions of coverages by binning the data into five-degree latitude bands. Our analysis shows a strong seasonal dependence of coverage. In general the meridional analysis indicates that increase in coverages for SeaWiFS/MODIS over SeaWiFS alone are greatest near the solar declination.

Food security status among grade 5 students in Nova Scotia, Canada and its association with health outcomes.

PubMed

Kirk, Sara F L; Kuhle, Stefan; McIsaac, Jessie-Lee D; Williams, Patty L; Rossiter, Melissa; Ohinmaa, Arto; Veugelers, Paul J

2015-11-01

Food security (FS) exists when all people, at all times, have physical and economic access to sufficient, safe and nutritious food to meet their needs. The present research sought to determine whether students from households experiencing moderate or severe food insecurity (FI) had poorer diet quality, higher body weights and poorer psychosocial outcomes than students from households classed as having high FS or marginal FI status. Population-based survey conducted in schools. Multiple regression analysis was used to explore associations between FS status (high FS; marginal, moderate, severe FI), dietary behaviours and intake, and health-related outcomes (body weight, quality of life, mood, peer relationships, externalizing problems). Nova Scotia, Canada. Grade 5 students (n 5853), aged 10-11 years, with complete information on FS status and student outcomes. In this sample, rates of household FS were 73·5% (high FS), 8·3% (marginal FI) 10·2% (moderate FI) and 7·1% (severe FI status). Students living in households experiencing moderate or severe FI had poorer diet quality, higher BMI and poorer psychosocial outcomes than students classed as having high FS or marginal FI. These findings provide important evidence for policy makers on the prevalence of FI among families in Nova Scotia with grade 5 children and its relationship with childhood nutrition, psychosocial and quality of life factors, and weight status.

SeaWiFS technical report series. Volume 9: The simulated SeaWiFS data set, version 1

NASA Technical Reports Server (NTRS)

Gregg, Watson W.; Chen, Frank C.; Mezaache, Ahmed L.; Chen, Judy D.; Whiting, Jeffrey A.; Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Indest, A. W. (Editor)

1993-01-01

Data system development activities for the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) must begin well before the scheduled 1994 launch. To assist in these activities, it is essential to develop a simulated SeaWiFS data set as soon as possible. Realism is of paramount importance in this data set, including SeaWiFS spectral bands, orbital and scanning characteristics, and known data structures. Development of the simulated data set can assist in identification of problem areas that can be addressed and solved before the actual data are received. This paper describes the creation of the first version of the simulated SeaWiFS data set. The data set includes the spectral band, orbital, and scanning characteristics of the SeaWiFS sensor and SeaStar spacecraft. The information is output in the data structure as it is stored onboard. Thus, it is a level-0 data set which can be taken from start to finish through a prototype data system. The data set is complete and correct at the time of printing, although the values in the telemetry fields are left blank. The structure of the telemetry fields, however, is incorporated. Also, no account for clouds has been included. However, this version facilitates early prototyping activities by the SeaWiFS data system, providing a realistic data set to assess performance.

Comparative Genome Analyses of Serratia marcescens FS14 Reveals Its High Antagonistic Potential

PubMed Central

Li, Pengpeng; Kwok, Amy H. Y.; Jiang, Jingwei; Ran, Tingting; Xu, Dongqing; Wang, Weiwu; Leung, Frederick C.

2015-01-01

S. marcescens FS14 was isolated from an Atractylodes macrocephala Koidz plant that was infected by Fusarium oxysporum and showed symptoms of root rot. With the completion of the genome sequence of FS14, the first comprehensive comparative-genomic analysis of the Serratia genus was performed. Pan-genome and COG analyses showed that the majority of the conserved core genes are involved in basic cellular functions, while genomic factors such as prophages contribute considerably to genome diversity. Additionally, a Type I restriction-modification system, a Type III secretion system and tellurium resistance genes are found in only some Serratia species. Comparative analysis further identified that S. marcescens FS14 possesses multiple mechanisms for antagonism against other microorganisms, including the production of prodigiosin, bacteriocins, and multi-antibiotic resistant determinants as well as chitinases. The presence of two evolutionarily distinct Type VI secretion systems (T6SSs) in FS14 may provide further competitive advantages for FS14 against other microbes. To our knowledge, this is the first report of comparative analysis on T6SSs in the genus, which identifies four types of T6SSs in Serratia spp.. Competition bioassays of FS14 against the vital plant pathogenic bacterium Ralstonia solanacearum and fungi Fusarium oxysporum and Sclerotinia sclerotiorum were performed to support our genomic analyses, in which FS14 demonstrated high antagonistic activities against both bacterial and fungal phytopathogens. PMID:25856195

Impact of Heart Transplantation on the Functional Status of US Children With End-Stage Heart Failure.

PubMed

Peng, David M; Zhang, Yulin; Rosenthal, David N; Palmon, Michal; Chen, Sharon; Kaufman, Beth D; Maeda, Katsuhide; Hollander, Seth A; McDonald, Nancy; Smoot, Leslie B; Bernstein, Daniel; Almond, Christopher S

2017-03-07

There are limited data describing the functional status (FS) of children after heart transplant (HT). We sought to describe the FS of children surviving at least 1 year after HT, to evaluate the impact of HT on FS, and to identify factors associated with abnormal FS post-HT. Organ Procurement and Transplantation Network data were used to identify all US children <21 years of age surviving ≥1 year post-HT from 2005 to 2014 with a functional status score (FSS) available at 3 time points (listing, transplant, ≥1 year post-HT). Logistic regression and generalized estimating equations were used to identify factors associated with abnormal FS (FSS≤8) post-HT. A total of 1633 children met study criteria. At the 1-year assessment, 64% were "fully active/no limitations" (FSS=10), 21% had "minor limitations with strenuous activity" (FSS=9); and 15% scored ≤8. In comparison with listing FS, FS at 1 year post-HT increased in 91% and declined/remained unchanged in 9%. A stepwise regression procedure selected the following variables for association with abnormal FS at 1 year post-HT: ≥18 years of age (odds ratio [OR], 1.8; 95% confidence interval [CI], 1.2-2.7), black race (OR, 1.5; 95% CI, 1.1-2.0), support with ≥inotropes at HT (OR, 1.7; 95% CI, 1.2-2.5), hospitalization status at HT (OR, 1.5; 95% CI, 1.0-2.19), chronic steroid use at HT (OR, 1.5; 95% CI, 1.0-2.2), and treatment for early rejection (OR, 2.0; 95% CI, 1.5-2.7). Among US children who survive at least 1 year after HT, FS is excellent for the majority of patients. HT is associated with substantial improvement in FS for most children. Early rejection, older age, black race, chronic steroid use, hemodynamic support at HT, and being hospitalized at HT are associated with abnormal FS post-HT. © 2017 American Heart Association, Inc.

Characteristics of initial fearful spells and their associations with DSM-IV panic attacks and panic disorder in adolescents and young adults from the community.

PubMed

Asselmann, Eva; Pané-Farré, Christiane; Isensee, Barbara; Wittchen, Hans-Ulrich; Lieb, Roselind; Höfler, Michael; Beesdo-Baum, Katja

2014-08-01

Few studies examined characteristics of initial fearful spells (FS) or panic attacks (PA) and their relation to DSM-IV PA and panic disorder (PD). A community sample of adolescents and young adults (N=3021) was followed up in 4 waves (T0-T3) over up to 10 years. FS, PA, and PD were assessed at each wave using the DSM-IV/M-CIDI. Characteristics of the initial FS/PA including perceived reasons/triggers, appraisal, duration, and behavioral/emotional consequences of the initial FS/PA were retrospectively assessed at T1 and T2 in those reporting the experience of lifetime FS or PA at these waves (N=363). Multinomial logistic regressions adjusted for sex and age were used to reveal associations of initial FS/PA characteristics (aggregated data from T1 and T2) with PA only (N=88) and PD (N=62; lifetime incidences cumulated across assessment waves) (reference group: No PA/PD). Alcohol consumption, drugs/medication, and physical illness as perceived reasons for the initial FS/PA were associated with PA-only (OR 2.46-5.44), while feelings of depression, feelings of anxiety, and having always been anxious/nervous as perceived reasons for the initial FS/PA, appraising the initial FS/PA as terrible and long-term irritating/burdensome, subsequent feelings of depression, subsequent avoidance, and subsequent consumption of medication, alcohol, or drugs were associated with PD (OR 2.64-4.15). A longer duration until "feeling okay again" was associated with both PA-only (OR=1.29 per category) and PD (OR=1.63). Initial FS/PA characteristics were necessarily assessed retrospectively by self-report only. Thus, our data might be subject to recall/evaluation biases. Aggregated data were used and strictly prospective-longitudinal studies are necessary that replicate our findings. Assessing initial FS/PA characteristics might be useful to identify individuals at increased risk for more severe panic pathology. Copyright © 2014 Elsevier B.V. All rights reserved.

Epidemiology and diagnostic and therapeutic management of febrile seizures in the Italian pediatric emergency departments: A prospective observational study.

PubMed

Vitaliti, Giovanna; Castagno, Emanuele; Ricceri, Fulvio; Urbino, Antonio; Di Pianella, Alberto Verrotti; Lubrano, Riccardo; Caramaschi, Elisa; Prota, Maurizio; Pulvirenti, Rita Maria; Ajovalasit, Patrizia; Signorile, Giuseppe; Navone, Carla; La Bianca, Maria Rosaria; Villani, Alberto; Corsello, Giovanni; Falsaperla, Raffaele

2017-01-01

Febrile seizures (FS) involve 2-5% of the paediatric population, among which Complex FS (CFS) account for one third of accesses for FS in Emergency Departments (EDs). The aim of our study was to define the epidemiology, the clinical, diagnostic and therapeutic approach to FS and CFSs in the Italian EDs. A multicenter prospective observational study was performed between April 2014 and March 2015. Patients between 1 and 60 months of age, randomly accessing to ED for ongoing FS or reported FS at home were included. Demographic features and diagnostic-therapeutic follow-up were recorded. FS were categorized in simple (<10min), prolonged (10-30min) and status epilepticus (>30min). The study population consisted of 268 children. Most of the children experienced simple FS (71.65%). Among the 68 (25.37%) patients with complex FS, 11 were 6-12 month-old, accounting for 45.83% of all the infants with FS in the younger age group. No therapy has been administered at home in 76.12% patients; 23.51% of them received endorectal diazepam and only 1 patient received buccal midazolam. At arrival at ED, no therapy was necessary for 70.52% patients; 50.63% received endorectal diazepam and 17.72% an i.v. bolus of midazolam. Blood tests and acid-base balanced were performed respectively in 82.09% of cases. An electroencephalogram at ED was performed in 21.64% of patients. Neuroimagings were done in 3.73% of cases. A neurologic consultation was asked for 36 patients (13.43%). this is the first study assessing epidemiologic characteristics of FS in the Italian pediatric population, evidencing a higher prevalence of CFSs in children younger than 12 months of age and opening a new research scenario on the blood brain barrier vulnerability. On a national level, our study showed the need for a diagnostic standardized work-up to improve the cost/benefit ratio on CFS management. Copyright © 2016 Elsevier B.V. All rights reserved.

Polyunsaturated fatty acid supplementation: effects of seaweed Ascophyllum nodosum and flaxseed on milk production and fatty acid profile of lactating ewes during summer.

PubMed

Caroprese, Mariangela; Ciliberti, Maria Giovanna; Marino, Rosaria; Santillo, Antonella; Sevi, Agostino; Albenzio, Marzia

2016-08-01

The research reported in this Research Communication was undertaken to evaluate the effects of different sources of polyunsaturated fatty acids (PUFA) supplemented in the diet on milk production and milk fatty acid profile of lactating ewes exposed to long term heat stress. The experiment was conducted during summer, involved 32 ewes divided into 4 groups of 8 each, and lasted 6 weeks. The ewes in all groups were fed twice daily and received 1·8 kg/d of oat hay and 1 kg/d of concentrate. Flaxseed group (FS) was supplemented with 250 g/d of whole flaxseed, Ascophyllum nodosum group (AG) was supplemented with 25 g/d of seaweed Ascophyllum nodosum, and the combination group (FS + AG) received both flaxseed and Ascophyllum nodosum supplementation. The control group (CON) was fed with 1 kg/d of pelleted concentrate without PUFA supplementation. Milk samples were collected twice daily per week, and analysed for fat, total protein, casein, and lactose content. At the beginning and then at 2, 4 and 6 week of the experiment each milk sample was analysed for milk fatty acids. Temperature-humidity index (THI) was calculated daily. Supplementation of flaxseed and of the combination of flaxseed and Ascophyllum nodosum increased milk yield. The total content of saturated fatty acids (SFA) in milk decreased for ewes fed FS, followed by FS + AG. On the contrary, monounsaturated fatty acids (MUFA) increased for ewes fed FS and FS + AG. The total n-3 FA was found higher in FS and FS + AG than in AG and CON groups mainly because of the increase in C 18 : 3 n-3 in FS and FS + AG milk. Milk from FS + AG resulted in the highest n-3/n-6 ratio and decreases in atherogenic and thrombogenic indices. The combination of seaweed Ascophyllum nodosum and flaxseed can be suggested as an adequate supplementation to sustain milk production and milk fatty acid profile of sheep during summer season.

Negative Regulation of Abscisic Acid Signaling by the Fagus sylvatica FsPP2C1 Plays A Role in Seed Dormancy Regulation and Promotion of Seed Germination1

PubMed Central

González-García, Mary Paz; Rodríguez, Dolores; Nicolás, Carlos; Rodríguez, Pedro Luis; Nicolás, Gregorio; Lorenzo, Oscar

2003-01-01

FsPP2C1 was previously isolated from beech (Fagus sylvatica) seeds as a functional protein phosphatase type-2C (PP2C) with all the conserved features of these enzymes and high homology to ABI1, ABI2, and PP2CA, PP2Cs identified as negative regulators of ABA signaling. The expression of FsPP2C1 was induced upon abscisic acid (ABA) treatment and was also up-regulated during early weeks of stratification. Furthermore, this gene was specifically expressed in ABA-treated seeds and was hardly detectable in vegetative tissues. In this report, to provide genetic evidence on FsPP2C1 function in seed dormancy and germination, we used an overexpression approach in Arabidopsis because transgenic work is not feasible in beech. Constitutive expression of FsPP2C1 under the cauliflower mosaic virus 35S promoter confers ABA insensitivity in Arabidopsis seeds and, consequently, a reduced degree of seed dormancy. Additionally, transgenic 35S:FsPP2C1 plants are able to germinate under unfavorable conditions, as inhibitory concentrations of mannitol, NaCl, or paclobutrazol. In vegetative tissues, Arabidopsis FsPP2C1 transgenic plants show ABA-resistant early root growth and diminished induction of the ABA-response genes RAB18 and KIN2, but no effect on stomatal closure regulation. Seed and vegetative phenotypes of Arabidopsis 35S:FsPP2C1 plants suggest that FsPP2C1 negatively regulates ABA signaling. The ABA inducibility of FsPP2C1 expression, together with the transcript accumulation mainly in seeds, suggest that it could play an important role modulating ABA signaling in beechnuts through a negative feedback loop. Finally, we suggest that negative regulation of ABA signaling by FsPP2C1 is a factor contributing to promote the transition from seed dormancy to germination during early weeks of stratification. PMID:12970481

SeaWiFS: North Pacific Storm

NASA Technical Reports Server (NTRS)

2002-01-01

An extratropical storm can be seen swirling over the North Pacific just south of Alaska. This SeaWiFS image was collected yesterday at 23:20 GMT. Credit: Provided by the SeaWiFS Project, NASA/Goddard Space Flight Center, and ORBIMAGE

Implementation and process analysis of pilot scale multi-phase anaerobic fermentation and digestion of faecal sludge in Ghana

PubMed Central

Shih, Justin; Fanyin-Martin, Ato; Taher, Edris; Chandran, Kartik

2017-01-01

Background.  In Ghana, faecal sludge (FS) from on-site sanitation facilities is often discharged untreated into the environment, leading to significant insults to environmental and human health. Anaerobic digestion offers an attractive pathway for FS treatment with the concomitant production of energy in the form of methane. Another innovative option includes separating digestion into acidogenesis (production of volatile fatty acids (VFA)) and methanogenesis (production of methane), which could ultimately facilitate the production of an array of biofuels and biochemicals from the VFA. This work describes the development, implementation and modeling based analysis of a novel multiphase anaerobic fermentation-digestion process aimed at FS treatment in Kumasi, Ghana.  Methods.  A pilot-scale anaerobic fermentation process was implemented at the Kumasi Metropolitan Assembly’s Oti Sanitary Landfill Site at Adanse Dompoase.  The process consisted of six 10 m reactors in series, which were inoculated with bovine rumen and fed with fecal sludge obtained from public toilets.  The performance of the fermentation process was characterized in terms of both aqueous and gaseous variables representing the conversion of influent organic carbon to VFA as well as CH 4.  Using the operating data, the first-ever process model for FS fermentation and digestion was developed and calibrated, based on the activated sludge model framework. Results and Conclusions.  This work represents one of the first systematic efforts at integrated FS characterization and process modeling to enable anaerobic fermentation and digestion of FS. It is shown that owing to pre-fermentation of FS in public septage holding tanks, one could employ significantly smaller digesters (lower capital costs) or increased loading capabilities for FS conversion to biogas or VFA. Further, using the first-ever calibrated process model for FS fermentation and digestion presented herein, we expect improved and more mechanistically informed development and application of different process designs and configurations for global FS management practice. PMID:29528044

Future Standardization of Space Telecommunications Radio System with Core Flight System

NASA Technical Reports Server (NTRS)

Briones, Janette C.; Hickey, Joseph P.; Roche, Rigoberto; Handler, Louis M.; Hall, Charles S.

2016-01-01

NASA Glenn Research Center (GRC) is integrating the NASA Space Telecommunications Radio System (STRS) Standard with the Core Flight System (cFS), an avionics software operating environment. The STRS standard provides a common, consistent framework to develop, qualify, operate and maintain complex, reconfigurable and reprogrammable radio systems. The cFS is a flexible, open architecture that features a plugand- play software executive called the Core Flight Executive (cFE), a reusable library of software components for flight and space missions and an integrated tool suite. Together, STRS and cFS create a development environment that allows for STRS compliant applications to reference the STRS application programmer interfaces (APIs) that use the cFS infrastructure. These APIs are used to standardize the communication protocols on NASAs space SDRs. The cFS-STRS Operating Environment (OE) is a portable cFS library, which adds the ability to run STRS applications on existing cFS platforms. The purpose of this paper is to discuss the cFS-STRS OE prototype, preliminary experimental results performed using the Advanced Space Radio Platform (ASRP), the GRC S- band Ground Station and the SCaN (Space Communication and Navigation) Testbed currently flying onboard the International Space Station (ISS). Additionally, this paper presents a demonstration of the Consultative Committee for Space Data Systems (CCSDS) Spacecraft Onboard Interface Services (SOIS) using electronic data sheets (EDS) inside cFE. This configuration allows for the data sheets to specify binary formats for data exchange between STRS applications. The integration of STRS with cFS leverages mission-proven platform functions and mitigates barriers to integration with future missions. This reduces flight software development time and the costs of software-defined radio (SDR) platforms. Furthermore, the combined benefits of STRS standardization with the flexibility of cFS provide an effective, reliable and modular framework to minimize software development efforts for spaceflight missions.

Study of PCDD/Fs distribution in fly ash, ash deposits, and bottom ash from a medical waste incinerator in China.

PubMed

Du, Yingzhe; Jin, Yuqi; Lu, Shengyong; Peng, Zheng; Li, Xiaodong; Yan, Jianhua

2013-02-01

Over the past decades in China, the number of medical waste incinerators (MWIs) has been rising rapidly, causing emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). In this study, samples of fly ash, ash deposits, and bottom ash from typical MWIs were analyzed for PCDD/Fs and their distribution characteristics. Results showed international toxic equivalent (I-TEQ) values in the range of 6.9-67 ng I-TEQ/g in fly ash and ash deposits, whereas the concentration in bottom ash was extremely low (only 1.33 pg I-TEQ/g), yet the generation of PCDD/Fs was mostly de novo synthesis in fly ash and ash deposits according to the ratio of PCDFs to PCDDs; the major distribution differences of PCDD/Fs in fly ash was manifested by the content of toxic furan 2,3,7,8-TCDF but other toxic PCDD/Fs showed similar distribution. Other findings are that 2,3,4,7,8-PeCDF had the most contribution to TEQ concentration, and that the most abundant toxic furan congener is 1,2,3,4,6,7,8-HpCDF. Correlation analysis showed that there was no significant correlation between PCDD/Fs concentration and several other physical and chemical parameters. This paper is of interest because it presents the emission performances of PCDD/Fs in ash from medical waste incineration in China. PCDD/F contents in fly ash and ash deposits vary between 6.9 and 67.3 ng I-TEQ/g. However, the concentration in bottom ash was extremely low (only 1.33 x 10(-3) ng I-TEQ/g). The fingerprints of PCDD/Fs in fly ash are almost similar, except for 2,3,7,8-TCDF. There is no marked correlation between PCDD/Fs and other physicochemical properties.

Comparison of performances of femtosecond laser and microkeratome for thin-flap laser in situ keratomileusis.

PubMed

Kasetsuwan, Ngamjit; Satitpitakul, Vannarut; Puangsricharern, Vilavun; Reinprayoon, Usanee; Pariyakanok, Lalida

2016-08-01

To compare the clinical outcomes of femtosecond laser (FS) and microkeratome (MK) for thin-flap in situ keratomileusis (LASIK). Data from patients with moderate to high myopia (spherical equivalent, >-4 diopters [D]) who underwent thin-flap LASIK using FS (199 eyes/110 patients) and MK (157 eyes/86 patients) were analyzed in this retrospective study. Preoperative and postoperative data were recorded from day 1 and months 1 and 3, postoperatively. Visual and refractive outcomes were compared for efficacy, safety, predictability, stability, and the efficacy and safety indices. Three months postoperatively, more eyes in the FS group had an uncorrected distance visual acuity (UCVA) of 20/40 or better compared to MK group (relative risk [RR] 1.01, 95% confidence interval [CI], 0.97-1.05, P = 0.58); significantly more eyes in FS group had an UCVA of 20/20 or better (RR, 1.26, 95%CI, 1.08-1.48, P = 0.003). Intraoperative bleeding occurred in 5% and 36.7%, respectively, of FS and MK groups. There were no significant differences in the refractive predictability within spherical equivalents of 0.5 D (FS, 72%; MK, 63%) and 1.0 D (FS, 90%; MK, 86%). Both groups showed good stability 3 months, postoperatively. The efficacy index in FS group was 113.4%; that in MK group was 102.5% at 3 months postoperatively (P < 0.05). The safety indices for FS and MK groups at 3 months postoperatively were 116.4% and 108.2%, respectively (P < 0.05). Both methods of thin-flap created LASIK were effective, safe, predicable, and stable. FS group had significant improvements in efficacy and safety, confirmed by the efficacy and safety indices, compared to MK group. Lasers Surg. Med. 48:596-601, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Implementation and process analysis of pilot scale multi-phase anaerobic fermentation and digestion of faecal sludge in Ghana.

PubMed

Shih, Justin; Fanyin-Martin, Ato; Taher, Edris; Chandran, Kartik

2017-11-06

Background.  In Ghana, faecal sludge (FS) from on-site sanitation facilities is often discharged untreated into the environment, leading to significant insults to environmental and human health. Anaerobic digestion offers an attractive pathway for FS treatment with the concomitant production of energy in the form of methane. Another innovative option includes separating digestion into acidogenesis (production of volatile fatty acids (VFA)) and methanogenesis (production of methane), which could ultimately facilitate the production of an array of biofuels and biochemicals from the VFA. This work describes the development, implementation and modeling based analysis of a novel multiphase anaerobic fermentation-digestion process aimed at FS treatment in Kumasi, Ghana.  Methods.  A pilot-scale anaerobic fermentation process was implemented at the Kumasi Metropolitan Assembly's Oti Sanitary Landfill Site at Adanse Dompoase.  The process consisted of six 10 m reactors in series, which were inoculated with bovine rumen and fed with fecal sludge obtained from public toilets.  The performance of the fermentation process was characterized in terms of both aqueous and gaseous variables representing the conversion of influent organic carbon to VFA as well as CH 4 .  Using the operating data, the first-ever process model for FS fermentation and digestion was developed and calibrated, based on the activated sludge model framework. Results and Conclusions.  This work represents one of the first systematic efforts at integrated FS characterization and process modeling to enable anaerobic fermentation and digestion of FS. It is shown that owing to pre-fermentation of FS in public septage holding tanks, one could employ significantly smaller digesters (lower capital costs) or increased loading capabilities for FS conversion to biogas or VFA. Further, using the first-ever calibrated process model for FS fermentation and digestion presented herein, we expect improved and more mechanistically informed development and application of different process designs and configurations for global FS management practice.

A fragment substitution in the promoter of CsHDZIV11/CsGL3 is responsible for fruit spine density in cucumber (Cucumis sativus L.).

PubMed

Zhang, Haiyang; Wang, Lina; Zheng, Shuangshuang; Liu, Zezhou; Wu, Xiaoqin; Gao, Zhihui; Cao, Chenxing; Li, Qiang; Ren, Zhonghai

2016-07-01

The indel in the promoter of CsHDZIV11 co-segregates with fruit spine density and could be used for molecular breeding in cucumber. Fruit spine density is an important quality trait for marketing in cucumber (Cucumis sativus L.). However, the molecular basis of fruit spine density in cucumber remains unclear. In this study, we isolated a mutant, few spines 1 (fs1), from CNS2 (wild type, WT), a North China-type cucumber with a high density of fruit spines. Genetic analysis showed that fs1 was controlled by a single recessive Mendelian factor. Bulked segregant analysis combined with genome resequencing were used for mapping fs1 in the F2 population derived from a cross between the fs1 mutant and WT, and it was located on chromosome 6 through association analysis. To develop more polymorphic markers to locate fs1, another F2 population was constructed from the cross between fs1 and 'Chinese long' 9930. Then, fs1 was narrowed down to a 110.4-kb genomic region containing 25 annotated genes. A fragment substitution was identified in the promoter region of Csa6M514870 between fs1 and WT. This fragment in fs1 was also present in wild cucumber. Csa6M514870 encodes a PDF2-related protein, a homeodomain-leucine zipper IV transcription factor (CsHDZIV11/CsGL3) sharing high identity and similarity with proteins related to trichome formation or epidermal cell differentiation. Quantitative reverse-transcription PCR revealed a higher expression level of CsHDZIV11 in young fruits from fs1 compared to WT. A molecular marker based on this indel co-segregated with the spine density. This work provides a solid foundation not only for understanding the molecular mechanism of fruit spine density, but also for molecular breeding in cucumber.

Facile fabrication of superhydrophobic hybrid nanotip and nanopore arrays as surface-enhanced Raman spectroscopy substrates

NASA Astrophysics Data System (ADS)

Li, Yuxin; Li, Juan; Wang, Tiankun; Zhang, Zhongyue; Bai, Yu; Hao, Changchun; Feng, Chenchen; Ma, Yingjun; Sun, Runguang

2018-06-01

We demonstrate the fabrication of superhydrophobic hybrid nanotip and nanopore arrays (NTNPAs) that can act as sensitive surface-enhanced Raman spectroscopy (SERS) substrates. The large-area substrates were fabricated by following a facile, low-cost process consisting of the one-step voltage-variation anodization of Al foil, followed by Ag nanoparticle deposition and fluorosilane (FS) modification. Uniformly distributed, large-area (5 × 5 cm2) NTNPAs can be obtained rapidly by anodizing Al foil for 1560 s followed by Ag deposition for 400 s, which showed good SERS reproducibility as using1 μM Rhodamine 6G (R6G) as analyte. SERS performances of superhydrophobic NTNPAs with different FS modification and Ag nanoparticle deposition orders were also studied. The nanosamples with FS modification followed by Ag nanoparticle deposition (FS-Ag) showed better SERS sensitivity than the nanosamples with Ag nanoparticle deposition followed by FS modification (Ag-FS). The detection limit of a directly dried R6G droplet can reach 10-8 M on the FS-Ag nanosamples. The results can help create practical high sensitive SERS substrates, which can be used in developing advanced bio- and chemical sensors.

SeaWiFS technical report series. Volume 27: Case studies for SeaWiFS calibration and validation, part 3

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Acker, James G. (Editor); Mueller, J. L.; Fraser, R. S.; Biggar, S. F.; Thome, K. J.; Slater, P. N.; Holmes, A. W.; Barnes, R. A.

1995-01-01

This document provides brief reports, or case studies, on a number of investigations sponsored by the Calibration and Validation Team (CVT) within the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Project. Chapter I describes a comparison of the irradiance immersion coefficients determined for several different marine environmental radiometers (MERs). Chapter 2 presents an analysis of how light absorption by atmospheric oxygen will influence the radiance measurements in band 7 of the SeaWiFS instrument. Chapter 3 gives the results of the second ground-based solar calibration of the instrument, which was undertaken after the sensor was modified to reduce the effects of internal stray light. (The first ground-based solar calibration of SeaWiFS is described in Volume 19 in the SeaWiFS Technical Report Series.) Chapter 4 evaluates the effects of ship shadow on subsurface irradiance and radiance measurements deployed from the deck of the R/V Weatherbird 11 in the Atlantic Ocean near Bermuda. Chapter 5 illustrates the various ways in which a single data day of SeaWiFS observations can be defined, and why the spatial definition is superior to the temporal definition for operational usage.

Feruloylserotonin inhibits hydrogen peroxide-induced melanogenesis and apoptosis in B16F10 and SK-Mel-2 melanoma cells.

PubMed

Cho, Hyejoung; Kim, Okjoon; Lee, Younghee; Kang, Li-Jung; Nguyen, Cam Ngoc; Ishihara, Atsushi; Kim, Hye-Eun

2017-09-30

Feruloylserotonin (FS) is a major bioactive component of safflower seeds, with documented strong antibacterial, anti-inflammatory, and free radical scavenging activities. Reactive oxygen species (ROS) can strongly induce melanogenesis and cell apoptosis. The present study aimed to investigate the ability of FS in preventing hydrogen peroxide (H 2 O 2 )-induced melanogenesis and cell apoptosis. Melanogenesis and apoptotic cell death were induced by transient exposure to H 2 O 2 in B16F10 and SK-Mel-2 melanoma cells. FS significantly inhibited melanogenesis and cell death in both cell lines. FS inhibited H 2 O 2 -induced melanin production by down-regulating CREB/MITF/TYR signaling via inhibited intracellular cAMP accumulation. Additionally, FS induced extracellular regulated kinase activation, which led to the degradation of MITF and consequently decreased TYR expression and melanin production in H 2 O 2 -stimulated cells. Furthermore, FS inhibited H 2 O 2 -induced apoptotic cell death by maintaining mitochondrial membrane potential. Therefore, FS might have potential use for cosmetic whitening and as a therapeutic agent for hyperpigmentation disorder. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

SeaWiFS technical report series. Volume 13: Case studies for SeaWiFS calibration and validation, part 1

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Mcclain, Charles R.; Comiso, Josefino C.; Fraser, Robert S.; Firestone, James K.; Schieber, Brian D.; Yeh, Eueng-Nan; Arrigo, Kevin R.; Sullivan, Cornelius W.

1994-01-01

Although the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Calibration and Validation Program relies on the scientific community for the collection of bio-optical and atmospheric correction data as well as for algorithm development, it does have the responsibility for evaluating and comparing the algorithms and for ensuring that the algorithms are properly implemented within the SeaWiFS Data Processing System. This report consists of a series of sensitivity and algorithm (bio-optical, atmospheric correction, and quality control) studies based on Coastal Zone Color Scanner (CZCS) and historical ancillary data undertaken to assist in the development of SeaWiFS specific applications needed for the proper execution of that responsibility. The topics presented are as follows: (1) CZCS bio-optical algorithm comparison, (2) SeaWiFS ozone data analysis study, (3) SeaWiFS pressure and oxygen absorption study, (4) pixel-by-pixel pressure and ozone correction study for ocean color imagery, (5) CZCS overlapping scenes study, (6) a comparison of CZCS and in situ pigment concentrations in the Southern Ocean, (7) the generation of ancillary data climatologies, (8) CZCS sensor ringing mask comparison, and (9) sun glint flag sensitivity study.

Review on occurrence and behavior of PCDD/Fs and dl-PCBs in atmosphere of East Asia

NASA Astrophysics Data System (ADS)

Trinh, Minh Man; Chang, Moo Been

2018-05-01

This paper reviews the data from studies mainly published after 2000 to provide the current understanding of the physicochemical properties, atmospheric occurrence, gas/particle partitioning, fate and temporal trends in atmospheric matrix of PCDD/Fs and dl-PCBs of East Asia. Ambient PCDD/Fs and dl-PCBs concentrations in East Asia are found to be tens to hundreds times higher than that measured in Europe and North America. After strict regulations on PCDD/Fs and dl-PCBs emissions are enacted, the concentrations of these compounds decrease dramatically in Eastern Asian countries. In general, most of PCDD/Fs distribute in particle phase while dl-PCBs majorly exist in gas phase. Three main factors including physicochemical properties of the compounds, properties of particle and atmospheric condition affect the gas/particle partitioning of PCDD/Fs and dl-PCBs. The accuracy of absorption and adsorption models on predicting gas/particle partitioning of PCDD/Fs and dl-PCBs is evaluated. Gas-phase compounds are mostly removed from the atmosphere via reactions with OH radicals while those in particle phase are majorly removed by wet/dry deposition processes. The effects of removing processes and long-range transport on gas/particle partitioning are also discussed.

SeaWiFS Technical Report Series. Volume 22: Prelaunch Acceptance Report for the SeaWiFS Radiometer

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Acker, James G. (Editor); Barnes, Robert A.; Barnes, William L.; Esaias, Wayne E.; Mcclain, Charles R.

1994-01-01

The final acceptance, or rejection, of the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) will be determined by the instrument's on-orbit operation. There is, however, an extensive set of laboratory measurements describing the operating characteristics of the radiometer. Many of the requirements in the Ocean Color Data Mission (OCDM) specifications can be checked only by laboratory measurements. Here, the calibration review panel examines the laboratory characterization and calibration of SeaWiFS in the light of the OCDM performance specification. Overall, the performance of the SeaWiFS instrument meets or exceeds the requirements of the OCDM contract in all but a few unimportant details. The detailed results of this examination are presented here by following the outline of the specifications, as found in the Contract. The results are presented in the form of requirements and compliance pairs. These results give conclusions on many, but not all, of the performance specifications. The acceptance by this panel of the performance of SeaWiFS must only be considered as an intermediate conclusion. The ultimate acceptance (or rejection) of the SeaWiFS data set will rely on the measurements made by the instrument on orbit.

Crop Acreage Estimation: Landsat TM and Resourcesat-1 AWiFS Sensor Assessment of the Mississippi River Delta, 2005

NASA Technical Reports Server (NTRS)

Boryan, Claire; Johnson, Dave; Craig, Mike; Seffrin, Bob; Mueller, RIck

2007-01-01

AWiFs data are appropriate for crop acreage estimation over large, spectrally homogenous, crop areas such as the Mid-West, the Delta and the Northern Great Plains. Regression and Kappa statistics for soybean, corn, cotton, rice and sorghum produced using both the Landsat TM and AWiFS data are very similar. AWiFS data appear to be a suitable alternative or supplement to Landsat TM data for production of NASS'Cropland Data Layer product.

Low temperature destruction of PCDD/Fs over V2O5-CeO2/TiO2 catalyst with ozone.

PubMed

Yu, Ming-Feng; Lin, Xiao-Qing; Yan, Mi; Li, Xiao-Dong; Chen, Tong; Yan, Jian-Hua

2016-09-01

Catalytic destruction of PCDD/Fs (polychlorinated dibenzo-p-dioxins and furans) over V2O5-CeO2/TiO2 catalyst was investigated at a low temperature range of 140-180 °C, in the absence and presence of ozone (200 ppm). Nano-TiO2 support was used to prepare the catalyst by step impregnation method. A stable PCDD/Fs-generating system was established to support the catalytic destruction tests. In the presence of ozone alone, destruction efficiencies of PCDD/Fs are between 32.2 and 43.1 % with temperature increasing from 140 to 180 °C. The activity of V2O5-CeO2/TiO2 catalyst alone on PCDD/Fs destruction is also studied. The increase of temperature from 140 to 180 °C enhances the activity of catalyst with destruction efficiencies increasing from 54.7 to 73.4 %. However, ozone addition greatly enhances the catalytic activity of V2O5-CeO2/TiO2 catalyst on PCDD/Fs decomposition. At 180 °C, the destruction efficiency of PCDD/Fs achieved with V2O5-CeO2/TiO2 catalyst and ozone is above 86.0 %. It indicates that the combined use of ozone and catalyst reduces the reaction temperature of PCDD/Fs oxidation and offers a new method to destroy PCDD/Fs with high destruction efficiency at a low temperature. Furthermore, the destruction efficiencies of 17 toxic PCDD/F congeners, achieved with ozone alone, catalyst alone, and catalyst/ozone are analyzed.

Iron deficiency up-regulates iron absorption from ferrous sulphate but not ferric pyrophosphate and consequently food fortification with ferrous sulphate has relatively greater efficacy in iron-deficient individuals.

PubMed

Zimmermann, Michael B; Biebinger, Ralf; Egli, Ines; Zeder, Christophe; Hurrell, Richard F

2011-04-01

Fe absorption from water-soluble forms of Fe is inversely proportional to Fe status in humans. Whether this is true for poorly soluble Fe compounds is uncertain. Our objectives were therefore (1) to compare the up-regulation of Fe absorption at low Fe status from ferrous sulphate (FS) and ferric pyrophosphate (FPP) and (2) to compare the efficacy of FS with FPP in a fortification trial to increase body Fe stores in Fe-deficient children v. Fe-sufficient children. Using stable isotopes in test meals in young women (n 49) selected for low and high Fe status, we compared the absorption of FPP with FS. We analysed data from previous efficacy trials in children (n 258) to determine whether Fe status at baseline predicted response to FS v. FPP as salt fortificants. Plasma ferritin was a strong negative predictor of Fe bioavailability from FS (P < 0·0001) but not from FPP. In the efficacy trials, body Fe at baseline was a negative predictor of the change in body Fe for both FPP and FS, but the effect was significantly greater with FS (P < 0·01). Because Fe deficiency up-regulates Fe absorption from FS but not from FPP, food fortification with FS may have relatively greater impact in Fe-deficient children. Thus, more soluble Fe compounds not only demonstrate better overall absorption and can be used at lower fortification levels, but they also have the added advantage that, because their absorption is up-regulated in Fe deficiency, they innately 'target' Fe-deficient individuals in a population.

SeaWiFS technical report series. Volume 25: Ocean optics protocols for SeaWiFS validation, revision 1

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Acker, James G. (Editor); Mueller, James L.; Austin, Roswell W.

1995-01-01

This report presents protocols for measuring optical properties, and other environmental variables, to validate the radiometric performance of the Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and to develop and validate bio-optical algorithms for use with SeaWiFS data. The protocols are intended to establish foundations for a measurement strategy to verify the challenging SeaWiFS uncertainty goals of 5 percent in water-leaving radiances and 35 percent in chlorophyll alpha concentration. The protocols first specify the variables which must be measured, and briefly review the rationale for measuring each variable. Subsequent chapters cover detailed protocols for instrument performance specifications, characterizing and calibrating instruments, methods of making measurements in the field, and methods of data analysis. These protocols were developed at a workshop sponsored by the SeaWiFS Project Office (SPO) and held at the Naval Postgraduate School in Monterey, California (9-12 April 1991). This report began as the proceedings of the workshop, as interpreted and expanded by the authors and reviewed by workshop participants and other members of the bio-optical research community. The protocols are an evolving prescription to allow the research community to approach the unprecedented measurement uncertainties implied by the SeaWiFS goals; research and development are needed to improve the state-of-the-art in specific areas. These protocols should be periodically revised to reflect technical advances during the SeaWiFS Project cycle. The present edition (Revision 1) incorporates new protocols in several areas, including expanded protocol descriptions for Case-2 waters and other improvements, as contributed by several members of the SeaWiFS Science Team.

Effects of femtosecond laser and other surface treatments on the bond strength of metallic and ceramic orthodontic brackets to zirconia

PubMed Central

García-Sanz, Verónica; Bellot-Arcís, Carlos; Mendoza-Yero, Omel; Doñate-Buendía, Carlos; Montero, Javier; Albaladejo, Alberto

2017-01-01

Femtosecond laser has been proposed as a method for conditioning zirconia surfaces to boost bond strength. However, metallic or ceramic bracket bonding to femtosecond laser-treated zirconia surfaces has not been tested. This study compared the effects of four conditioning techniques, including femtosecond laser irradiation, on shear bond strength (SBS) of metallic and ceramic brackets to zirconia.Three hundred zirconia plates were divided into five groups: 1) control (C); 2) sandblasting (APA); 3) silica coating and silane (SC); 4) femtosecond laser (FS); 5) sandblasting followed by femtosecond laser (APA+SC). A thermal imaging camera measured temperature changes in the zirconia during irradiation. Each group was divided into 2 subgroups (metallic vs ceramic brackets). SBS was evaluated using a universal testing machine. The adhesive remnant index (ARI) was registered and surfaces were observed under SEM. Surface treatment and bracket type significantly affected the bracket-zirconia bond strength. SBS was significantly higher (p<0.001) for ceramic brackets in all groups (APA+FS > APA > FS > SC > control) than metallic brackets (APA+FS > FS > SC > APA > control). For metallic brackets, groups SC (5.99 ± 1.86 MPa), FS (6.72 ± 2.30 MPa) and APA+FS (7.22 ± 2.73 MPa) reported significantly higher bond strengths than other groups (p < 0.05). For ceramic brackets, the highest bond strength values were obtained in groups APA (25.01 ± 4.45 MPa), FS (23.18 ± 6.51 MPa) and APA+FS (29.22 ± 8.20 MPa).Femtosecond laser enhances bond strength of ceramic and metallic brackets to zirconia. Ceramic brackets provide significantly stronger adhesion than metallic brackets regardless of the surface treatment method. PMID:29049418

Single d-metal atoms on F(s) and F(s+) defects of MgO(001): a theoretical study across the periodic table.

PubMed

Neyman, Konstantin M; Inntam, Chan; Matveev, Alexei V; Nasluzov, Vladimir A; Rösch, Notker

2005-08-24

Single d-metal atoms on oxygen defects F(s) and F(s+) of the MgO(001) surface were studied theoretically. We employed an accurate density functional method combined with cluster models, embedded in an elastic polarizable environment, and we applied two gradient-corrected exchange-correlation functionals. In this way, we quantified how 17 metal atoms from groups 6-11 of the periodic table (Cu, Ag, Au; Ni, Pd, Pt; Co, Rh, Ir; Fe, Ru, Os; Mn, Re; and Cr, Mo, W) interact with terrace sites of MgO. We found bonding with F(s) and F(s+) defects to be in general stronger than that with O2- sites, except for Mn-, Re-, and Fe/F(s) complexes. In M/F(s) systems, electron density is accumulated on the metal center in a notable fashion. The binding energy on both kinds of O defects increases from 3d- to 4d- to 5d-atoms of a given group, at variance with the binding energy trend established earlier for the M/O2- complexes, 4d < 3d < 5d. Regarding the evolution of the binding energy along a period, group 7 atoms are slightly destabilized compared to their group 6 congeners in both the F(s) and F(s+) complexes; for later transition elements, the binding energy increases gradually up to group 10 and finally decreases again in group 11, most strongly on the F(s) site. This trend is governed by the negative charge on the adsorbed atoms. We discuss implications for an experimental detection of metal atoms on oxide supports based on computed core-level energies.

Source contributions to total concentrations and carcinogenic potencies of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in ambient air: a case study in Suzhou City, China.

PubMed

Xuan, Zhiqiang; Bi, Chenglu; Li, Jiafu; Nie, Jihua; Chen, Zhihai

2017-10-01

The potential source categories and source contributions of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in ambient air from Suzhou City, China, were performed by principal component analysis-multiple linear regression (PCA-MLR) and positive matrix factorization (PMF). The carcinogenic potencies of PCDD/Fs were quantitatively apportioned based on the positive matrix factorization-toxic equivalent concentration (PMF-TEQ) method. The results of the present study were summarized as follows. (1) The total concentrations and toxic equivalent concentrations of PCDD/Fs (∑PCDD/Fs and TEQ) in ambient air from Suzhou City were 1.34-42.80 pg N m -3 and 0.081-1.22 pg I-TEQ N m -3 , respectively. (2) PCA-MLR suggested that industrial combustion (IC), electric arc furnaces (EAFs) and secondary aluminum smelters (ALSs), unleaded gas-fueled vehicle sources (UGFVs), ALSs, and hazardous solid waste incinerators (HSWIs) could be the primary PCDD/F contributors, accounting for 13.2, 16.7, 35.5, 19.4, and 15.2% of ∑PCDD/Fs, respectively. (3) PMF and PMF-TEQ indicated that EAFs (carbon steel), UGFVs, IC, ALSs, municipal solid waste incinerators (MSWIs) and hospital waste incinerators (HWIs), and HSWIs contributed 10.9, 10.9, 42.8, 11.3, 10.7, and 13.4% to ∑PCDD/Fs, but contributed 8.3, 12.3, 50.3, 12.7, 6.0, and 10.4% to carcinogenic potencies of PCDD/Fs. This study was the first attempt to quantitatively apportion the source-specific carcinogenic potencies of PCDD/Fs in ambient air.

SMILE and Wavefront-Guided LASIK Out-Compete Other Refractive Surgeries in Ameliorating the Induction of High-Order Aberrations in Anterior Corneal Surface

PubMed Central

2016-01-01

Purpose. To compare the change of anterior corneal higher-order aberrations (HOAs) after laser in situ keratomileusis (LASIK), wavefront-guided LASIK with iris registration (WF-LASIK), femtosecond laser-assisted laser in situ keratomileusis (FS-LASIK), and small incision lenticule extraction (SMILE). Methods. In a prospective study, 82 eyes underwent LASIK, 119 eyes underwent WF-LASIK, 88 eyes underwent FS-LASIK, and 170 eyes underwent SMILE surgery. HOAs were measured with Pentacam device preoperatively and 6 months after surgery. The aberrations were described as Zernike polynomials, and analysis focused on total HOAs, spherical aberration (SA), horizontal coma, and vertical coma over 6 mm diameter central corneal zone. Results. Six months postoperatively, all procedures result in increase of anterior corneal total HOAs and SA. There were no significant differences in the induced HOAs between LASIK and FS-LASIK, while SMILE induced fewer total HOAs and SA compared with LASIK and FS-LASIK. Similarly, WF-LASIK also induced less total HOAs than LASIK and FS-LASIK, but only fewer SA than FS-LASIK (P < 0.05). No significant difference could be detected in the induced total HOAs and SA between SMILE and WF-LASIK, whereas SMILE induced more horizontal coma and vertical coma compared with WF-LASIK (P < 0.05). Conclusion. FS-LASIK and LASIK induced comparable anterior corneal HOAs. Compared to LASIK and FS-LASIK, both SMILE and WF-LASIK showed advantages in inducing less total HOAs. In addition, SMILE also possesses better ability to reduce the induction of SA in comparison with LASIK and FS-LASIK. However, SMILE induced more horizontal coma and vertical coma compared with WF-LASIK, indicating that the centration of SMILE procedure is probably less precise than WF-LASIK. PMID:27818792

Associations between salivary gland histopathologic diagnoses and phenotypic features of Sjögren’s Syndrome (SS) among 1726 registry participants

PubMed Central

Daniels, Troy E.; Cox, Darren; Shiboski, Caroline H.; Schiødt, Morten; Wu, Ava; Lanfranchi, Hector; Umehara, Hisanori; Zhao, Yan; Challacombe, Stephen; Lam, Mi Y.; DeSouza, Yvonne; Schiødt, Julie; Holm, Helena; Bisio, Patricia A. M.; Gandolfo, Mariana S.; Sawaki, Toshioki; Li, Mengtao; Zhang, Wen; Varghese-Jacob, Beni; Ibsen, Per; Keszler, Alicia; Kurose, Nozomu; Nojima, Takayuki; Odell, Edward; Criswell, Lindsey A.; Jordan, Richard; Greenspan, John S.

2011-01-01

Objectives The Sjögren’s International Collaborative Clinical Alliance (SICCA) is an ongoing NIH-funded registry whose cohort ranges from those with symptoms of possible Sjögren’s syndrome (SS) to those with obvious disease. Using this database we examined associations between labial salivary gland (LSG) histopathology and other phenotypic features of SS. Methods LSG biopsy specimens from SICCA participants underwent protocol-directed histopathological assessments. Among 1726 LSG specimens exhibiting any pattern of sialadenitis, we compared biopsy diagnoses against concurrent salivary, ocular and serological assessments. Results LSG specimens included 61% with focal lymphocytic sialadenitis, (FLS; 66% of which had focus scores [FS] ≥ 1 per 4 mm2) and 38% with non-specific or sclerosing chronic sialadenitis (NS/SCS). FS ≥ 1 was strongly associated with positive serum anti-SS-A/-B, rheumatoid factor and the ocular component of SS, but not with symptoms of dry mouth or eyes. Those with positive anti-SS-A/-B were 9 times more likely to have a FS ≥ 1 (95% CI: 7.4; 11.9) than FS<1 or another pattern, while those with unstimulated whole salivary flow < 0.1 ml/min were only 2 times more likely to have a FS ≥ 1 (95% CI:1.7; 2.8) than FS<1 or another pattern, while controlling for other phenotypic features of SS. Conclusions Distinguishing FLS from NS/SCS is essential in assessing LSG biopsies, before determining FS. A diagnosis of FLS with FS ≥ 1 per 4 mm2, as compared to FLS with FS< 1 or with NS/SCS, was strongly associated with the ocular and serological components of SS and reflects SS autoimmunity. PMID:21480190

Angiotensin I-converting enzyme (ACE) inhibitory activity of Fucus spiralis macroalgae and influence of the extracts storage temperature-A short report.

PubMed

Paiva, Lisete; Lima, Elisabete; Neto, Ana Isabel; Baptista, José

2016-11-30

Recently, increasing attention has been paid to the marine algae as a natural source of novel angiotensin-I converting enzyme (ACE) inhibitors, such as the phlorotannins that are the predominant polyphenols in brown algae. This study reports, for the first time, the ACE inhibition of methanol extract/fractions from Azorean brown algae Fucus spiralis (Fs) determined by HPLC-UV method, their total phenolic content (TPC) quantified as phloroglucinol equivalents (PE) and the effect of the Fs dry powder methanol extracts (Fs-DME) storage temperature on ACE inhibition. The results indicate that the ACE inhibition of Fs-DME decreased by 28.8% and 78.2% when stored during 15days at -80°C and -13°C, respectively, as compared with the activity of Fs-DME at a refrigerated temperature of 6°C and assayed immediately after extraction that showed a value of 80.1±2.1%. This Fs-DME sample was fractionated by ultrafiltration membranes into three molecular weight ranges (<1kDa, 1-3kDa and >3kDa), presenting the fraction>3kDa remarkably high ACE inhibition (88.8±2.4%), TPC value (156.6±1.4mg PE/g of dry weight fraction) and yield. Furthermore, chromatographic and spectrophotometric analyses corroborate that phenolic compounds were present in Fs methanol extract/fractions, and also revealed that phloroglucinol occurs in Fs. The results seem to suggest that Azorean Fs can be a source of powerful ACE-inhibitory phlorotannins with potential impact on public health, particularly on hypertensive patients. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of femtosecond laser and other surface treatments on the bond strength of metallic and ceramic orthodontic brackets to zirconia.

PubMed

García-Sanz, Verónica; Paredes-Gallardo, Vanessa; Bellot-Arcís, Carlos; Mendoza-Yero, Omel; Doñate-Buendía, Carlos; Montero, Javier; Albaladejo, Alberto

2017-01-01

Femtosecond laser has been proposed as a method for conditioning zirconia surfaces to boost bond strength. However, metallic or ceramic bracket bonding to femtosecond laser-treated zirconia surfaces has not been tested. This study compared the effects of four conditioning techniques, including femtosecond laser irradiation, on shear bond strength (SBS) of metallic and ceramic brackets to zirconia.Three hundred zirconia plates were divided into five groups: 1) control (C); 2) sandblasting (APA); 3) silica coating and silane (SC); 4) femtosecond laser (FS); 5) sandblasting followed by femtosecond laser (APA+SC). A thermal imaging camera measured temperature changes in the zirconia during irradiation. Each group was divided into 2 subgroups (metallic vs ceramic brackets). SBS was evaluated using a universal testing machine. The adhesive remnant index (ARI) was registered and surfaces were observed under SEM. Surface treatment and bracket type significantly affected the bracket-zirconia bond strength. SBS was significantly higher (p<0.001) for ceramic brackets in all groups (APA+FS > APA > FS > SC > control) than metallic brackets (APA+FS > FS > SC > APA > control). For metallic brackets, groups SC (5.99 ± 1.86 MPa), FS (6.72 ± 2.30 MPa) and APA+FS (7.22 ± 2.73 MPa) reported significantly higher bond strengths than other groups (p < 0.05). For ceramic brackets, the highest bond strength values were obtained in groups APA (25.01 ± 4.45 MPa), FS (23.18 ± 6.51 MPa) and APA+FS (29.22 ± 8.20 MPa).Femtosecond laser enhances bond strength of ceramic and metallic brackets to zirconia. Ceramic brackets provide significantly stronger adhesion than metallic brackets regardless of the surface treatment method.

Risk of Guillain–Barré syndrome following pandemic influenza A(H1N1) 2009 vaccination in Germany†

PubMed Central

Prestel, Jürgen; Volkers, Peter; Mentzer, Dirk; Lehmann, Helmar C; Hartung, Hans-Peter; Keller-Stanislawski, Brigitte

2014-01-01

Purpose A prospective, epidemiologic study was conducted to assess whether the 2009 pandemic influenza A(H1N1) vaccination in Germany almost exclusively using an AS03-adjuvanted vaccine (Pandemrix) impacts the risk of Guillain–Barré syndrome (GBS) and its variant Fisher syndrome (FS). Methods Potential cases of GBS/FS were reported by 351 participating hospitals throughout Germany. The self-controlled case series methodology was applied to all GBS/FS cases fulfilling the Brighton Collaboration (BC) case definition (levels 1–3 of diagnostic certainty) with symptom onset between 1 November 2009 and 30 September 2010 reported until end of December 2010. Results Out of 676 GBS/FS reports, in 30 cases, GBS/FS (BC levels 1–3) occurred within 150 days following influenza A(H1N1) vaccination. The relative incidence of GBS/FS within the primary risk period (days 5–42 post-vaccination) compared with the control period (days 43–150 post-vaccination) was 4.65 (95%CI [2.17, 9.98]). Similar results were found when stratifying for infections within 3 weeks prior to onset of GBS/FS and when excluding cases with additional seasonal influenza vaccination. The overall result of temporally adjusted analyses supported the primary finding of an increased relative incidence of GBS/FS following influenza A(H1N1) vaccination. Conclusions The results indicate an increased risk of GBS/FS in temporal association with pandemic influenza A(H1N1) vaccination in Germany. © 2014 The Authors. Pharmacoepidemiology and Drug Safety published by John Wiley & Sons, Ltd. PMID:24817531

Three-Dimensional Isotropic Fat-Suppressed Proton Density-Weighted MRI at 3 Tesla Using a T/R-Coil Can Replace Multiple Plane Two-Dimensional Sequences in Knee Imaging.

PubMed

Homsi, R; Gieseke, J; Luetkens, J A; Kupczyk, P; Maedler, B; Kukuk, G M; Träber, F; Agha, B; Rauch, M; Rajakaruna, N; Willinek, W; Schild, H H; Hadizadeh, D R

2016-10-01

To evaluate whether a 3 D proton density-weighted fat-suppressed sequence (PDwFS) of the knee is able to replace multiplanar 2D-PDwFS. 52 patients (26 men, mean age: 41.9 ± 14.5years) underwent magnetic resonance imaging (MRI) of the knee at 3.0 Tesla using a T/R-coil. The imaging protocol included 3 planes of 2D-PDwFS (acquisition time (AT): 6:40 min; voxel sizes: 0.40 - 0.63 × 0.44 - 0.89 × 3mm³) and a 3D-PDwFS (AT: 6:31 min; voxel size: 0.63 × 0.68 × 0.63mm³). Homogeneity of fat suppression (HFS), artifacts, and image sharpness (IS) were evaluated on a 5-point scale (5[excellent] - 1[non-diagnostic]). The sum served as a measure for the overall image quality (OIQ). Contrast ratios (CR) compared to popliteal muscle were calculated for the meniscus (MEN), anterior (ACL) and posterior cruciate ligaments (PCL). In 13 patients who underwent arthroscopic knee surgery, two radiologists evaluated the presence of meniscal, ligamental and cartilage lesions to estimate the sensitivity and specificity of lesion detection. The CR was higher in the ACL, PCL and MEN in 3D- PDwFS compared to 2D-PDwFS (p < 0.01 for ACL and PCL; p = 0.07 for MEN). Compared to 2 D images, the OIQ was rated higher in 3D-PDwFS images (p < 0.01) due to fewer artifacts and HFS despite the lower IS (p < 0.01). The sensitivity and specificity of lesion detection in 3D- and 2D-PDwFS were similar. Compared to standard multiplanar 2D-PDwFS knee imaging, isotropic high spatial resolution 3D-PDwFS of the knee at 3.0 T can be acquired with high image quality in a reasonable scan time. Multiplanar reformations in arbitrary planes may serve as an additional benefit of 3D-PDwFS. • 3D-PDwFS of the knee is acquired with high image quality• 3D-PDwFS can be achieved in only one measurement with a reasonable scan time• 3D-PDwFS with the advantage of multiplanar reformation may replace 2D-PD-weighted knee MRI Citation Format: • Homsi R, Gieseke J, Luetkens JA et al. Three-Dimensional Isotropic Fat-Suppressed Proton Density-Weighted MRI at 3 Tesla Using a T/R-Coil Can Replace Multiple Plane Two-Dimensional Sequences in Knee Imaging. Fortschr Röntgenstr 2016; 188: 949 - 956. © Georg Thieme Verlag KG Stuttgart · New York.

[Neuroprotective effect of naloxone in brain damage caused by repeated febrile seizure].

PubMed

Shan, Ying; Qin, Jiong; Chang, Xing-zhi; Yang, Zhi-xian

2004-04-01

The brain damage caused by repeated febrile seizure (FS) during developing age is harmful to the intellectual development of children. So how to decrease the related damage is a very important issue. The main purpose of the present study was to find out whether the non-specific opiate antagonist naloxone at low dose has the neuroprotective effect on seizure-induced brain damage. Warm water induced rat FS model was developed in this study. Forty-seven rats were randomly divided into two groups: normal control group (n = 10) and hyperthermic seizure groups (n = 37). The latter was further divided into FS control group (n = 13) and naloxone-treated group (n = 24). The dose of naloxone is different in two naloxone-treated groups (12/each group), in one group the dose was 1 mg/kg, in the other one 2 mg/kg. Seven febrile seizures were induced in each rat of hyperthermic seizure groups with the interval of 2 days. The rats were weighed and injected intraperitoneally with naloxone once the FS occurred in naloxone-treated group, while the rats of the other groups were injected with 0.9% sodium chloride. Latency, duration and grade of FS in different groups were observed and compared. HE-staining and the electron microscopy (EM) were used to detect the morphologic and ultrastructural changes of hippocampal neurons. In naloxone-treated group, the rats' FS duration and FS grade (5.02 +/- 0.63, 2.63 +/- 0.72) were significantly lower (t = 5.508, P < 0.01; t = 8.439, P < 0.01) than those in FS control group (7.70 +/- 2.25 min, 4.52 +/- 0.49), although no significant gap was observed on FS latency between them. In FS control group, HE-staining pattern of hippocampal CA(1) and CA(2) showed lots of disordered neurons with confused polarity and vacuoles formed. Nuclei were with various size, some rounded and some oblong. While in naloxone-treated groups, the arrangement of neurons was regular, only a small quantity of neurons had changed polarity and vacuoles formed. Most nuclei were oblong and in the same size. In hippocampal CA(1) region and dentate gyrus of rats from FS control group, EM showed that the most mitochondrion volumes obviously increased with vacuoles formed, the matrix condensed, the ridge obscured or disappeared, apoptosis body emerged. Minor to moderate dilation of rough endoplasmic reticulum and Golgi's complex was also observed. However, in naloxone-treated groups, the number of neurons with swollen mitochondrion and endoplasmic reticulum was much fewer than that in FS control group. No apoptosis body was observed. The comparison between them showed much lighter brain damage in naloxone-treated groups than in FS control group. Although low-dose naloxone could not totally stop the occurrence of febrile seizure, it could lighten the brain damage resulted from repeated FS to some extent.

RD2-MolPack-Chim3, a packaging cell line for stable production of lentiviral vectors for anti-HIV gene therapy.

PubMed

Stornaiuolo, Anna; Piovani, Bianca Maria; Bossi, Sergio; Zucchelli, Eleonora; Corna, Stefano; Salvatori, Francesca; Mavilio, Fulvio; Bordignon, Claudio; Rizzardi, Gian Paolo; Bovolenta, Chiara

2013-08-01

Over the last two decades, several attempts to generate packaging cells for lentiviral vectors (LV) have been made. Despite different technologies, no packaging clone is currently employed in clinical trials. We developed a new strategy for LV stable production based on the HEK-293T progenitor cells; the sequential insertion of the viral genes by integrating vectors; the constitutive expression of the viral components; and the RD114-TR envelope pseudotyping. We generated the intermediate clone PK-7 expressing constitutively gag/pol and rev genes and, by adding tat and rd114-tr genes, the stable packaging cell line RD2-MolPack, which can produce LV carrying any transfer vector (TV). Finally, we obtained the RD2-MolPack-Chim3 producer clone by transducing RD2-MolPack cells with the TV expressing the anti-HIV transgene Chim3. Remarkably, RD114-TR pseudovirions have much higher potency when produced by stable compared with transient technology. Most importantly, comparable transduction efficiency in hematopoietic stem cells (HSC) is obtained with 2-logs less physical particles respect to VSV-G pseudovirions produced by transient transfection. Altogether, RD2-MolPack technology should be considered a valid option for large-scale production of LV to be used in gene therapy protocols employing HSC, resulting in the possibility of downsizing the manufacturing scale by about 10-fold in respect to transient technology.

Re-engineering adenovirus vector systems to enable high-throughput analyses of gene function.

PubMed

Stanton, Richard J; McSharry, Brian P; Armstrong, Melanie; Tomasec, Peter; Wilkinson, Gavin W G

2008-12-01

With the enhanced capacity of bioinformatics to interrogate extensive banks of sequence data, more efficient technologies are needed to test gene function predictions. Replication-deficient recombinant adenovirus (Ad) vectors are widely used in expression analysis since they provide for extremely efficient expression of transgenes in a wide range of cell types. To facilitate rapid, high-throughput generation of recombinant viruses, we have re-engineered an adenovirus vector (designated AdZ) to allow single-step, directional gene insertion using recombineering technology. Recombineering allows for direct insertion into the Ad vector of PCR products, synthesized sequences, or oligonucleotides encoding shRNAs without requirement for a transfer vector Vectors were optimized for high-throughput applications by making them "self-excising" through incorporating the I-SceI homing endonuclease into the vector removing the need to linearize vectors prior to transfection into packaging cells. AdZ vectors allow genes to be expressed in their native form or with strep, V5, or GFP tags. Insertion of tetracycline operators downstream of the human cytomegalovirus major immediate early (HCMV MIE) promoter permits silencing of transgenes in helper cells expressing the tet repressor thus making the vector compatible with the cloning of toxic gene products. The AdZ vector system is robust, straightforward, and suited to both sporadic and high-throughput applications.

Life cycle assessment of EPS and CPB inserts: design considerations and end of life scenarios.

PubMed

Tan, Reginald B H; Khoo, Hsien H

2005-02-01

Expanded polystyrene (EPS) and corrugated paperboard (CPB) are used in many industrial applications, such as containers, shock absorbers or simply as inserts. Both materials pose two different types of environmental problems. The first is the pollution and resource consumption that occur during the production of these materials; the second is the growing landfills that arise out of the excessive disposal of these packaging materials. Life cycle assessment or LCA will be introduced in this paper as a useful tool to compare the environmental performance of both EPS and CPB throughout their life cycle stages. This paper is divided into two main parts. The first part investigates the environmental impacts of the production of EPS and CPB from 'cradle-to-gate', comparing two inserts--both the original and proposed new designs. In the second part, LCA is applied to investigate various end-of-life cases for the same materials. The study will evaluate the environmental impacts of the present waste management practices in Singapore. Several 'what-if' cases are also discussed, including various percentages of landfilling and incineration. The SimaPro LCA Version 5.0 software's Eco-indicator 99 method is used to investigate the following five environmental impact categories: climate change, acidification/eutrophication, ecotoxicity, fossil fuels and respiratory inorganics.

The R package 'icosa' for coarse resolution global triangular and penta-hexagonal gridding

NASA Astrophysics Data System (ADS)

Kocsis, Adam T.

2017-04-01

With the development of the internet and the computational power of personal computers, open source programming environments have become indispensable for science in the past decade. This includes the increase of the GIS capacity of the free R environment, which was originally developed for statistical analyses. The flexibility of R made it a preferred programming tool in a multitude of disciplines from the area of the biological and geological sciences. Many of these subdisciplines operate with incidence (occurrence) data that are in a large number of cases to be grained before further analyses can be conducted. This graining is executed mostly by gridding data to cells of a Gaussian grid of various resolutions to increase the density of data in a single unit of the analyses. This method has obvious shortcomings despite the ease of its application: well-known systematic biases are induced to cell sizes and shapes that can interfere with the results of statistical procedures, especially if the number of incidence points influences the metrics in question. The 'icosa' package employs a common method to overcome this obstacle by implementing grids with roughly equal cell sizes and shapes that are based on tessellated icosahedra. These grid objects are essentially polyhedra with xyz Cartesian vertex data that are linked to tables of faces and edges. At its current developmental stage, the package uses a single method of tessellation which balances grid cell size and shape distortions, but its structure allows the implementation of various other types of tessellation algorithms. The resolution of the grids can be set by the number of breakpoints inserted into a segment forming an edge of the original icosahedron. Both the triangular and their inverted penta-hexagonal grids are available for creation with the package. The package also incorporates functions to look up coordinates in the grid very effectively and data containers to link data to the grid structure. The classes defined in the package are communicating with classes of the 'sp' and 'raster' packages and functions are supplied that allow resolution change and type conversions. Three-dimensional rendering is made available with the 'rgl' package and two-dimensional projections can be calculated using 'sp' and 'rgdal'. The package was developed as part of a project funded by the Deutsche Forschungsgemeinschaft (KO - 5382/1-1).

SeaWiFS Technical Report Series. Volume 40; SeaWiFS Calibration Topics

NASA Technical Reports Server (NTRS)

Barnes, Robert A.; Eplee, Robert E., Jr.; Yeh, Eueng-nan; Esaias, Wayne E.

1997-01-01

For Earth-observing satellite instruments, it was standard to consider each instrument band to have a spectral response that is infinitely narrow, i.e., to have a response from a single wavelength. The SeaWiFS bands, however, have nominal spectral bandwidths of 20 and 40 nm. These bandwidths effect the SeaWiFS measurements on orbit. The effects are also linked to the manner in which the instrument was calibrated and to the spectral shape of the radiance that SeaWiFS views. The spectral shape of that radiance will not be well known on orbit. In this technical memorandum, two source spectra are examined. The first is a 12,000 K Planck function, and the second is based on the modeling results of H. Gordon at the University of Miami. By comparing these spectra, the best available corrections to the SeaWiFS measurements for source spectral shape, plus estimates of the uncertainties in these corrections, can be tabulated.

Prefrontal Parvalbumin Neurons in Control of Attention

PubMed Central

Kim, Hoseok; Ährlund-Richter, Sofie; Wang, Xinming; Deisseroth, Karl; Carlén, Marie

2016-01-01

Summary While signatures of attention have been extensively studied in sensory systems, the neural sources and computations responsible for top-down control of attention are largely unknown. Using chronic recordings in mice, we found that fast-spiking parvalbumin (FS-PV) interneurons in medial prefrontal cortex (mPFC) uniformly show increased and sustained firing during goal-driven attentional processing, correlating to the level of attention. Elevated activity of FS-PV neurons on the timescale of seconds predicted successful execution of behavior. Successful allocation of attention was characterized by strong synchronization of FS-PV neurons, increased gamma oscillations, and phase locking of pyramidal firing. Phase-locked pyramidal neurons showed gamma-phase-dependent rate modulation during successful attentional processing. Optogenetic silencing of FS-PV neurons deteriorated attentional processing, while optogenetic synchronization of FS-PV neurons at gamma frequencies had pro-cognitive effects and improved goal-directed behavior. FS-PV neurons thus act as a functional unit coordinating the activity in the local mPFC circuit during goal-driven attentional processing. PMID:26771492

Evaluation of Risk Versus Benefit Information in Direct-To-Consumer (DTC) Prescription Drug Television Advertisements.

PubMed

Fahim, Germin; Toscani, Michael; Barone, Joseph A; Wang, Chris; Gandhi, Shivani

2018-01-01

The FDA's Presenting Risk Information draft guidance from May 2009 states that the time of risk versus benefit is a factor taken into consideration when evaluating audio and video direct-to-consumer (DTC) broadcasts. The objective of the study is to evaluate the proportion of risk narration on television (TV) advertisements in comparison to the actual proportion of serious adverse effects findings across select therapeutic areas. The study reviews prescription drug TV advertisements between the years 2010 and 2015 separated by therapeutic class. Indicators to assess risk versus benefit are as follows: total benefit time, total risk time, total ad time, percentage proportion of risk, and number of serious adverse effects (SAEs) listed in the package insert. The objective is establishing proportion of risk-to-benefit narration across therapeutic areas and the proportion of risk narration compared to the number of SAEs in the package insert. These outcomes will reflect whether TV advertisements abide by the "fair balance" rule and if the time spent on risk narrations is proportional to the number of SAEs across therapeutic areas. An analysis of risk versus benefit showed that there was a vast range of percentage differences in risk versus benefit narration across the products selected. The majority of the products narrated showed a 40% to 60% risk-to-benefit ratio. Six out of the 10 products evaluated communicated applicable black box warnings. There was variability among the SAE percentages presented between products. Lack of consistency exists between risks versus benefit proportions among different drug products.

The increase in prescriptions of bisphosphonates and the incidence proportion of osteonecrosis of the jaw after risk communication activities in Japan: a hospital-based cohort study†

PubMed Central

Sumi, Eriko; Yamazaki, Toru; Tanaka, Shiro; Yamamoto, Keiichi; Nakayama, Takeo; Bessho, Kazuhisa; Yokode, Masayuki

2014-01-01

Purpose The purpose of this study was to investigate the impact of risk communication about bisphosphonate (BP)-related osteonecrosis of the jaw (ONJ) on the number of reported cases to the Drug Adverse Reactions Reporting System and on the incidence proportion of ONJ in a hospital-based cohort study in Japan. Method We conducted a survey of the safety information on BP-related ONJ available from regulatory authorities, pharmaceutical manufacturers and academic associations. We also performed a trend analysis of a dataset from the Drug Adverse Reactions Reporting System and a sub-analysis, using previously constructed data from a retrospective cohort study. Results Risk communication from pharmaceutical manufacturers and academic associations began within 1 year after revisions were made to the package inserts, in October 2006. Twenty times more cases of ONJ have been reported to regulatory authority since 2007, compared with the period before 2007. In our cohort, the incidence proportion of ONJ during and after 2009 was four times greater than before 2009. During this period, BPs were frequently prescribed, whereas there was no increase in the use of alternative agents, such as selective estrogen receptor modulators. Conclusion ONJ was increasingly diagnosed after risk communication efforts, but the impact of the communications was not clear. Safety notifications were diligently disseminated after the package insert was revised. However, there was no surveillance for ONJ before the revision. © 2014 The Authors. Pharmacoepidemiology and Drug Safety published by John Wiley & Sons, Ltd. PMID:24399628

Factors influencing subjects' comprehension of a set of medicine package inserts.

PubMed

Pires, Carla; Vigário, Marina; Cavaco, Afonso

2016-08-01

Background Package inserts (PIs) should promote the safe and effective use of medicines. The comprehension of PIs is related to socio-demographic features, such as education. Objectives To evaluate the participants' comprehension of a sample of PIs and to build an explanatory model of subjects' understanding of the content of these documents. Setting The data were collected from municipalities, city halls, firefighters, the military, schools and charities from two Portuguese regions. Methods Cross-sectional descriptive survey: 503 participants, homogeneously distributed by education and gender. The self-administered tool comprised questions on socio-demographic data, literacy tasks and comprehension evaluation of 12 purposively selected PIs. A logistic regression analysis was used. Main outcome measures Scores of numeracy tasks and comprehension. Results The average comprehension score for the PIs was 63 % (±32 %), with 48 % (n = 239) of the participants scoring <75 %. The most important predictors in explaining a comprehension score ≥75 % were having >12 years of education and correctly performing a numeracy task [respectively, OR 49.6 (CI 95 %: 22.8-108) and OR 2.48 (CI 95 %: 1.5-4.2)]. Conclusion An explanatory model of subjects' knowledge about the content of the tested PIs was built. Given that a high level of education and literacy were found to be the most relevant predictors for acceptable comprehension rates, PIs should be clearly written to assure that they are understood by all potential users, including the less educated. The evaluated PIs may thus need to be simplified.

Medication Safety During Pregnancy: Improving Evidence-Based Practice.

PubMed

Sinclair, Susan M; Miller, Richard K; Chambers, Christina; Cooper, Elizabeth M

2016-01-01

Nearly 90% of women in the United States have taken medications during pregnancy. Medication exposures during pregnancy can result in adverse pregnancy and neonatal outcomes including birth defects, fetal loss, intrauterine growth restriction, prematurity, and longer-term neurodevelopmental outcomes. Advising pregnant women about the safety of medication use during pregnancy is complicated by a lack of data necessary to engage the woman in an informed discussion. Routinely, health care providers turn to the package insert, yet this information can be incomplete and can be based entirely on animal studies. Often, adequate safety data are not available. In a busy clinical setting, health care providers need to be able to quickly locate the most up-to-date information in order to counsel pregnant women concerned about medication exposure. Deciding where to locate the best available information is difficult, particularly when the needed information does not exist. Pregnancy registries are initiated to obtain more data about the safety of specific medication exposures during pregnancy; however, these studies are slow to produce meaningful information, and when they do, the information may not be readily available in a published form. Health care providers have valuable data in their everyday practice that can expand the knowledge base about medication safety during pregnancy. This review aims to discuss the limitations of the package insert regarding medication safety during pregnancy, highlight additional resources available to health care providers to inform practice, and communicate the importance of pregnancy registries for expanding knowledge about medication safety during pregnancy. © 2016 by the American College of Nurse-Midwives.

Unsuccessfully Treated Hypertension: A Major Public Health Problem With a Potential Solution.

PubMed

Furberg, Curt D; Sealey, Jean E; Blumenfeld, Jon D

2017-09-01

About one-half of all hypertensive adults do not have their blood pressure controlled. They are often prescribed medications that conform to national guidelines but they continue to have elevated blood pressure. This public health problem might be improved by applying plasma renin guided therapy. A contributor to the public health problem of unsuccessfully treated hypertension is that the circulating renin-angiotensin system (RAS) is not recognized in treatment guidelines as clinically relevant for the treatment of hypertension or as important as the body salt status for determining blood pressure levels. Another contributor to the problem is the lack of specificity in the package inserts for antihypertensive drugs. They do not specifically state under the heading "Indications" that RAS blockers are primarily most effective in hypertensive subjects with medium and high plasma renin levels; by contrast, natriuretic drugs are most effective in those with low plasma renin levels. Literature review. To address the problem of unsuccessfully treated hypertension, we recommend that the "Indications" section of package inserts for antihypertensive drugs be more specific. The primary indication for RAS blockers ought to be hypertension with medium and high plasma renin levels, and natriuretic agents for those with low plasma renin levels. Similar language ought to be added to treatment guidelines. Additionally, 3 other reasons for lack of blood pressure control also need to be addressed-failure to prescribe antihypertensive drugs to hypertensive subjects, failure of patients to fill prescriptions, and low drug adherence. © American Journal of Hypertension, Ltd 2017. All rights reserved. For Permissions, please email: journals.permissions@oup.com

An evaluation of the completeness of drug-drug interaction-related information in package inserts.

PubMed

Ng, Giok Qin; Sklar, Grant Edward; Chng, Hui Ting

2017-02-01

The project aimed to evaluate the completeness of drug-drug interaction (DDI)-related information in package inserts (PIs) and develop a systematic approach to conduct the evaluation. DDI-related information in the branded PIs of statins, macrolides, protease inhibitors and selected drugs of narrow therapeutic index (DNTI) were evaluated against the criteria distilled from the Food and Drug Administration (FDA) labelling recommendation guidance document. Decision trees were crafted and employed in the evaluation process. Scores were computed to give each PI an overall completeness score and individual criterion completeness score. The Kruskal-Wallis test and Dunn's multiple comparison test were used to assess the differences in the completeness scores. The mean overall completeness score of the 21 PIs was 35.7 ± 13.4 % (range 12.2-62 %). Eight out of the 11 individual evaluation criterion had a mean completeness score below 50 %. A subclass analysis conducted revealed that PIs from the different drug classes differed in the type of DDI-related information, such that they are more complete or less complete. The completeness score of DDI-related information in the PIs varied extensively amongst and within drug classes. A consensus between the authorities and drug companies on the type and quality of DDI-related information to be included could improve their completeness in PIs and make PIs a valuable source of DDI reference. Decision trees, albeit not validated yet, lay the groundwork for a valuable tool to evaluate DDI-related or other drug information.

Do laboratories follow heart failure recommendations and guidelines and did we improve? The CARdiac MArker Guideline Uptake in Europe (CARMAGUE).

PubMed

Hammerer-Lercher, Angelika; Collinson, Paul; van Dieijen-Visser, Marja P; Pulkki, Kari; Suvisaari, Janne; Ravkilde, Jan; Stavljenic-Rukavina, Ana; Baum, Hannsjörg; Laitinen, Päivi

2013-06-01

Natriuretic peptides (NP) are well-established markers of heart failure (HF). During the past 5 years, analytical and clinical recommendations for measurement of these biomarkers have been published in guidelines. The aim of this follow-up survey was to investigate how well these guidelines for measurement of NP have been implemented in laboratory practice in Europe. Member societies of the European Federation of Clinical Chemistry and Laboratory Medicine were invited in 2009 to participate in a web-based audit questionnaire. The questionnaire requested information on type of tests performed, decision limits for HF, turn-around time and frequency of testing. There was a moderate increase (12%) of laboratories measuring NP compared to the initial survey in 2006. The most frequently used HF decision limits for B-type NP (BNP) and N-terminal BNP (NT-proBNP) were, respectively, 100 ng/L and 125 ng/L, derived from the package inserts in 55%. Fifty laboratories used a second decision limit. Age or gender dependent decision limits were applied in 10% (8.5% in 2006). The vast majority of laboratories (80%) did not have any criteria regarding frequency of testing, compared to 33% in 2006. The implementation of NP measurement for HF management was a slow process between 2006 and 2009 at a time when guidelines had just been established. The decision limits were derived from package insert information and literature. There was great uncertainty concerning frequency of testing which may reflect the debate about the biological variability which was not published for most of the assays in 2009.

Fat suppression with short inversion time inversion-recovery and chemical-shift selective saturation: a dual STIR-CHESS combination prepulse for turbo spin echo pulse sequences.

PubMed

Tanabe, Koji; Nishikawa, Keiichi; Sano, Tsukasa; Sakai, Osamu; Jara, Hernán

2010-05-01

To test a newly developed fat suppression magnetic resonance imaging (MRI) prepulse that synergistically uses the principles of fat suppression via inversion recovery (STIR) and spectral fat saturation (CHESS), relative to pure CHESS and STIR. This new technique is termed dual fat suppression (Dual-FS). To determine if Dual-FS could be chemically specific for fat, the phantom consisted of the fat-mimicking NiCl(2) aqueous solution, porcine fat, porcine muscle, and water was imaged with the three fat-suppression techniques. For Dual-FS and STIR, several inversion times were used. Signal intensities of each image obtained with each technique were compared. To determine if Dual-FS could be robust to magnetic field inhomogeneities, the phantom consisting of different NiCl(2) aqueous solutions, porcine fat, porcine muscle, and water was imaged with Dual-FS and CHESS at the several off-resonance frequencies. To compare fat suppression efficiency in vivo, 10 volunteer subjects were also imaged with the three fat-suppression techniques. Dual-FS could suppress fat sufficiently within the inversion time of 110-140 msec, thus enabling differentiation between fat and fat-mimicking aqueous structures. Dual-FS was as robust to magnetic field inhomogeneities as STIR and less vulnerable than CHESS. The same results for fat suppression were obtained in volunteers. The Dual-FS-STIR-CHESS is an alternative and promising fat suppression technique for turbo spin echo MRI. Copyright 2010 Wiley-Liss, Inc.

Cost analysis of intraoperative frozen section examinations in thyroid surgery in a Canadian tertiary center.

PubMed

Lai, Philip; Segall, Lorne; de Korompay, Nevin; Witterick, Ian; Freeman, Jeremy

2009-10-01

To perform a cost analysis of the routine intraoperative frozen section (FS) examinations in the management of patients undergoing thyroid surgery for unilateral thyroid nodules with benign or indeterminate cytology on preoperative fine-needle aspiration biopsies (FNABs). A retrospective chart review of 190 consecutive patients with unilateral thyroid nodules undergoing thyroid surgery was undertaken between March 2006 and March 2008. The results of FNAB, FS, and final histology were obtained from the pathology report. A cost analysis was performed to compare the cost of routine FS examinations to determine malignancy with the cost of performing a second surgical procedure. Of the 169 patients evaluated, there were 53 cases of malignant nodules. Malignancy was diagnosed by FS in 16 of these 53 cases, resulting in a total thyroidectomy and thereby avoiding the need for a completion thyroidectomy. The sensitivity and specificity of FS examination were 30.2% and 100.0%, respectively. The routine use of intraoperative FS examination in cases of benign or indeterminate nodules afforded a total cost savings of $3719.27, or a cost savings of $22.01 per patient. FS examination was useful in guiding our intraoperative management for patients with unilateral thyroid nodules with benign or indeterminate preoperative FNAB. The routine use of FS was cost-effective in our Canadian health care system, even without considering the intangible costs, such as patients' anxiety, emotional stress, and the loss of productivity owing to a second surgical procedure.

Prolactin levels during short- and long-term cross-sex hormone treatment: an observational study in transgender persons.

PubMed

Nota, N M; Dekker, M J H J; Klaver, M; Wiepjes, C M; van Trotsenburg, M A; Heijboer, A C; den Heijer, M

2017-08-01

The cause of prolactin alterations in transgender persons is often assigned to oestrogens, but the precise cause and time course during different phases of cross-sex hormone treatment (CHT) remain unclear. In this study, we prospectively examined prolactin levels in 55 female-to-males (FtMs) and 61 male-to-females (MtFs) during the first year of CHT. Because long-term prolactin data were not available in this population, we studied these levels in a retrospective population of 25 FtMs and 38 MtFs who underwent gonadectomy. FtMs were treated with testosterone and MtFs with estradiol, with or without the anti-androgen cyproterone acetate (CPA) (after gonadectomy CPA is cessated). During the first year of CHT, prolactin decreased with 25% (95CI: -33%, -12%) in FtMs and increased with 193% (95CI: 156%, 219%) in MtFs. Eighteen MtFs developed hyperprolactinemia (≥0.6 IU L -1 ). In the retrospective population, post-gonadectomy levels in FtMs were lower than baseline levels (-39%; 95CI: -51%, -20%) while in MtFs post-gonadectomy levels and baseline levels were comparable (-6%; 95CI: -24%, 15%). No hyperprolactinemia was found after gonadectomy. In conclusion, in FtMs, prolactin decreased consistently during CHT and in MtFs, prolactin increased during pre-surgical CHT but normalised after gonadectomy. It is likely that CPA induces increasing prolactin levels in MtFs. © 2016 Blackwell Verlag GmbH.

[Association of IL-1β-511T gene rs16944 polymorphism with febrile seizures].

PubMed

Ren, Xiao-Tun; Sun, Su-Zhen; Liu, Fang; Wang, Xiao-Ming

2014-02-01

Despite substantial research efforts worldwide, the role of inflammatory cytokine IL-1β in the onset of febrile seizures (FS) remains controversial. The aim of this study was to assess the relationship between rs16944 polymorphism of the IL-1β-511T gene and occurrence of simple FS in a sample of Han children in northern China. The IL-1β-511T gene rs16944 was genotyped by SNaPshot SNP technique in 141 FS children and 130 healthy control subjects. The genotypic and allelic frequencies in the two groups were comparatively analyzed. There were no significant differences in genotypic and allelic frequencies of rs16944 polymorphism of the IL-1β-511T gene between FS patients and control subjects (P>0.05).When the clinical data on A/A, A/G and G/G genotypes of the rs16944 polymorphism in FS patients, there was statistically significant difference in age of first onset (χ(2)=19.491, P<0.01), temperature of first onset (χ(2)=9.317, P<0.05) and family history of FS (χ(2)=26.798, P<0.01). There is no association between rs16944 polymorphism of the IL-1β-511T gene and the incidence of FS in Han children in Northern China. However, the differences in genotypes of this polymorphism might be associated with pathogenesis and prognosis of simple FS in the population studied.

Atmospheric concentrations and gas-particle partitioning of PCDD/Fs and dioxin-like PCBs around Hochiminh city.

PubMed

Trinh, Minh Man; Tsai, Ching Lan; Hien, To Thi; Thuan, Ngo Thi; Chi, Kai Hsien; Lien, Chien Guo; Chang, Moo Been

2018-07-01

Atmospheric PCDD/Fs and dl-PCBs samples were collected in Hochiminh city, Vietnam to address the effect of meteorological parameters, especially rainfall, on the occurrence and gas/particle partitioning of these persistent organic pollutants. The results indicate that PCDD/Fs and dl-PCBs concentrations in industrial site are higher than those measured in commercial and rural sites during both rainy and dry seasons. In terms of mass concentration, ambient PCDD/F levels measured in dry season are significantly higher than those measured in rainy season while dl-PCB levels do not vary significantly between rainy and dry seasons. The difference could be attributed to different gas/particle partitioning characteristics between PCDD/Fs and dl-PCBs. PCDD/Fs are found to be mainly distributed in particle phase while dl- PCBs are predominantly distributed in gas phase in both rainy and dry seasons. Additionally, Junge-Pankow and Harner-Bidleman models are applied to better understand the gas/particle partitioning of these pollutants in atmosphere. As a results, both PCDD/Fs and dl-PCBs are under non-equilibrium gas/particle partitioning condition, and PCDD/Fs tend to reach equilibrium easier in rainy season while there are no clear trend for dl-PCBs. Harner-Bidleman model performs better in evaluating the gas/particle partitioning of PCDD/Fs while Junge-Pankow model results in better prediction for dl-PCBs. Copyright © 2018 Elsevier Ltd. All rights reserved.

A manpower scheduling heuristic for aircraft maintenance application

NASA Astrophysics Data System (ADS)

Sze, San-Nah; Sze, Jeeu-Fong; Chiew, Kang-Leng

2012-09-01

This research studies a manpower scheduling for aircraft maintenance, focusing on in-flight food loading operation. A group of loading teams with flexible shifts is required to deliver and upload packaged meals from the ground kitchen to aircrafts in multiple trips. All aircrafts must be served within predefined time windows. The scheduling process takes into account of various constraints such as meal break allocation, multi-trip traveling and food exposure time limit. Considering the aircrafts movement and predefined maximum working hours for each loading team, the main objective of this study is to form an efficient roster by assigning a minimum number of loading teams to the aircrafts. We proposed an insertion based heuristic to generate the solutions in a short period of time for large instances. This proposed algorithm is implemented in various stages for constructing trips due to the presence of numerous constraints. The robustness and efficiency of the algorithm is demonstrated in computational results. The results show that the insertion heuristic more efficiently outperforms the company's current practice.

Materials and structures technology insertion into spacecraft systems: Successes and challenges

NASA Astrophysics Data System (ADS)

Rawal, Suraj

2018-05-01

Over the last 30 years, significant advancements have led to the use of multifunctional materials and structures technologies in spacecraft systems. This includes the integration of adaptive structures, advanced composites, nanotechnology, and additive manufacturing technologies. Development of multifunctional structures has been directly influenced by the implementation of processes and tools for adaptive structures pioneered by Prof. Paolo Santini. Multifunctional materials and structures incorporating non-structural engineering functions such as thermal, electrical, radiation shielding, power, and sensors have been investigated. The result has been an integrated structure that offers reduced mass, packaging volume, and ease of integration for spacecraft systems. Current technology development efforts are being conducted to develop innovative multifunctional materials and structures designs incorporating advanced composites, nanotechnology, and additive manufacturing. However, these efforts offer significant challenges in the qualification and acceptance into spacecraft systems. This paper presents a brief overview of the technology development and successful insertion of advanced material technologies into spacecraft structures. Finally, opportunities and challenges to develop and mature next generation advanced materials and structures are presented.

SU-8 microprobe with microelectrodes for monitoring electrical impedance in living tissues.

PubMed

Tijero, M; Gabriel, G; Caro, J; Altuna, A; Hernández, R; Villa, R; Berganzo, J; Blanco, F J; Salido, R; Fernández, L J

2009-04-15

This paper presents a minimally invasive needle-shaped probe capable of monitoring the electrical impedance of living tissues. This microprobe consists of a 160 microm thick SU-8 substrate containing four planar platinum (Pt) microelectrodes. We design the probe to minimize damage to the surrounding tissue and to be stiff enough to be inserted in living tissues. The proposed batch fabrication process is low cost and low time consuming. The microelectrodes obtained with this process are strongly adhered to the SU-8 substrate and their impedance does not depend on frequency variation. In vitro experiments are compared with previously developed Si and SiC based microprobes and results suggest that it is preferable to use the SU-8 based microprobes due to their flexibility and low cost. The microprobe is assembled on a flexible printed circuit FPC with a conductive glue, packaged with epoxy and wired to the external instrumentation. This flexible probe is inserted into a rat kidney without fracturing and succeeds in demonstrating the ischemia monitoring.

Gamma inert sterilization: a solution to polyethylene oxidation?

PubMed

Medel, Francisco J; Kurtz, Steven M; Hozack, William J; Parvizi, Javad; Purtill, James J; Sharkey, Peter F; MacDonald, Daniel; Kraay, Matthew J; Goldberg, Victor; Rimnac, Clare M

2009-04-01

In the 1990s, oxidation was found to occur in ultra-high molecular weight polyethylene total joint replacement components following gamma irradiation and prolonged shelf aging in air. Orthopaedic manufacturers developed barrier packaging to reduce oxidation during and after radiation sterilization. The present study explores the hypothesis that polyethylene components sterilized in a low-oxygen environment undergo similar in vivo oxidative mechanisms as inserts sterilized in air. In addition, the potential influence of the different sterilization processes on the wear performance of the polyethylene components was examined. An analysis of oxidation, wear, and surface damage was performed for forty-eight acetabular liners and 123 tibial inserts. The mean implantation time was 12.3+/-3.7 years for thirty-one acetabular liners that had been gamma sterilized in air and 4.0+/-2.5 years for the seventeen acetabular liners that had been gamma sterilized in inert gas. The mean implantation time was 11.0+/-3.2 years for the twenty-six tibial inserts that had been sterilized in air and 2.8+/-2.2 years for the ninety-seven tibial inserts that had been gamma sterilized in inert gas. Oxidation and hydroperoxide levels were characterized in loaded and unloaded regions of the inserts. Measurable oxidation and oxidation potential were observed in all cohorts. The oxidation and hydroperoxide levels were regional. Surfaces with access to body fluids were more heavily oxidized than protected bearing surfaces were. This variation appeared to be greater in historical (gamma-in-air-sterilized) components. Regarding wear performance, historical and conventional acetabular liners showed similar wear penetration rates, whereas a low incidence of delamination was confirmed for the conventional tibial inserts in the first decade of implantation. The present study explores the impact of industry-wide changes in sterilization practices for polyethylene. We found lower oxidation and oxidation potential in the conventional acetabular liners and tibial inserts that had been gamma sterilized in inert gas as compared with the historical components that had been gamma sterilized in air. However, we also found strong evidence that conventional components undergo mechanisms of in vivo oxidation similar to those observed following gamma irradiation in air. In addition, gamma sterilization in inert gas did not provide polyethylene with a significant improvement in terms of wear resistance as compared with gamma sterilization in air, except for a lower incidence of delamination in the first decade of implantation for tibial inserts.

Optimizing Ti:Sapphire laser for quantitative biomedical imaging

NASA Astrophysics Data System (ADS)

James, Jeemol; Thomsen, Hanna; Hanstorp, Dag; Alemán Hérnandez, Felipe Ademir; Rothe, Sebastian; Enger, Jonas; Ericson, Marica B.

2018-02-01

Ti:Sapphire lasers are powerful tools in the field of scientific research and industry for a wide range of applications such as spectroscopic studies and microscopic imaging where tunable near-infrared light is required. To push the limits of the applicability of Ti:Sapphire lasers, fundamental understanding of the construction and operation is required. This paper presents two projects, (i) dealing with the building and characterization of custom built tunable narrow linewidth Ti:Sapphire laser for fundamental spectroscopy studies; and the second project (ii) the implementation of a fs-pulsed commercial Ti:Sapphire laser in an experimental multiphoton microscopy platform. For the narrow linewidth laser, a gold-plated diffraction grating with a Littrow geometry was implemented for highresolution wavelength selection. We demonstrate that the laser is tunable between 700 to 950 nm, operating in a pulsed mode with a repetition rate of 1 kHz and maximum average output power around 350 mW. The output linewidth was reduced from 6 GHz to 1.5 GHz by inserting an additional 6 mm thick etalon. The bandwidth was measured by means of a scanning Fabry Perot interferometer. Future work will focus on using a fs-pulsed commercial Ti:Sapphire laser (Tsunami, Spectra physics), operating at 80 MHz and maximum average output power around 1 W, for implementation in an experimental multiphoton microscopy set up dedicated for biomedical applications. Special focus will be on controlling pulse duration and dispersion in the optical components and biological tissue using pulse compression. Furthermore, time correlated analysis of the biological samples will be performed with the help of time correlated single photon counting module (SPCM, Becker&Hickl) which will give a novel dimension in quantitative biomedical imaging.

Ability of dairy cows to be inseminated according to breed and genetic merit for production traits under contrasting pasture-based feeding systems.

PubMed

Bedere, N; Disenhaus, C; Ducrocq, V; Leurent-Colette, S; Delaby, L

2017-05-01

Strong genetic selection on production traits is considered to be responsible for the declined ability of dairy cows to ensure reproduction. The present study aimed to quantify the effect of genetic characteristics (breeds and genetic merit for production traits) and feeding systems (FS) on the ability of dairy cows to be inseminated. An experiment was conducted during 9 years on Normande and Holstein cows assigned to contrasted pasture-based FS. Diets were based on maize silage in winter and grazing plus concentrate in spring in the High FS; and on grass silage in winter and grazing with no concentrate during spring in the low FS. Within breed, cows were classified into two genetic groups with similar estimated breeding values (EBV) for milk solids: cows with high EBV for milk yield were included in a Milk-Group and those with high EBV for fat and protein contents were included in a Content-Group. Holstein produced more milk throughout lactation than Normande cows (+2294 kg in the High FS and +1280 kg in the Low FS, P<0.001) and lost more body condition to nadir (-1.00 point in the High FS and -0.80 kg in the Low FS, P<0.001). They also showed a poorer ability to be inseminated because of both a delayed commencement of luteal activity (CLA) and delayed first service (more days from start of the breeding season to first service, DAI1). Cows in the Milk-Group produced more milk than cows in the Content-Group, but milk solids production was similar. Cows in the Content-Group had earlier CLA than cows in the Milk-Group (P<0.01). Genetic group neither affected ovulation detection rate nor DAI1. Within breed and FS, cows with high genetic merit for milk yield had later CLA and DAI1. Cows in the High FS produced more milk and lost less condition to nadir than cows in the Low FS. FS did not affect dairy cows' ability to be inseminated. However, cows with higher milk protein content, and presumably better energy balance, had earlier CLA (P<0.01) and DAI1 (P<0.10). In addition, higher milk yield was associated with poorer ovulation detection rate and oestrus intensity (P<0.05). The study showed that at similar EBV level for milk solids, selection for increased milk fat and protein content resulted in improved cyclicity and similar oestrous expression and submission rates compared with selection for increased milk yield.

Majewski osteodysplastic primordial dwarfism type II (MOPD II) syndrome previously diagnosed as Seckel syndrome: report of a novel mutation of the PCNT gene.

PubMed

Piane, Maria; Della Monica, Matteo; Piatelli, Gianluca; Lulli, Patrizia; Lonardo, Fortunato; Chessa, Luciana; Scarano, Gioacchino

2009-11-01

We report on a 3-year-old boy with prenatal onset of proportionate dwarfism, postnatal severe microcephaly, high forehead with receded hairline, sparse scalp hair, beaked nose, mild retrognathia and hypotonia diagnosed at birth as Seckel syndrome. At age 3 years, he became paralyzed due to a cerebrovascular malformation. Based on the clinical and radiological features showing evidence of skeletal dysplasia, the diagnosis was revised to Majewski osteodysplastic primordial dwarfism type II (MOPD II) syndrome. Western blot analysis of the patient's lymphoblastoid cell line lysate showed the absence of the protein pericentrin. Subsequent molecular analysis identified a novel homozygous single base insertion (c.1527_1528insA) in exon 10 of the PCNT gene, which leads to a frameshift (Treo510fs) and to premature protein truncation. PCNT mutations must be considered diagnostic of MOPD II syndrome. A possible role of pericentrin in the development of cerebral vessels is suggested. Copyright 2009 Wiley-Liss, Inc.

Automated Test for NASA CFS

NASA Technical Reports Server (NTRS)

McComas, David C.; Strege, Susanne L.; Carpenter, Paul B. Hartman, Randy

2015-01-01

The core Flight System (cFS) is a flight software (FSW) product line developed by the Flight Software Systems Branch (FSSB) at NASA's Goddard Space Flight Center (GSFC). The cFS uses compile-time configuration parameters to implement variable requirements to enable portability across embedded computing platforms and to implement different end-user functional needs. The verification and validation of these requirements is proving to be a significant challenge. This paper describes the challenges facing the cFS and the results of a pilot effort to apply EXB Solution's testing approach to the cFS applications.

Fat-suppressed three-dimensional fast spoiled gradient-recalled echo imaging: a modified FS 3D SPGR technique for assessment of patellofemoral joint chondromalacia.

PubMed

Wang, S F; Cheng, H C; Chang, C Y

1999-01-01

Fast fat-suppressed (FS) three-dimensional (3D) spoiled gradient-recalled echo (SPGR) imaging of 64 articular cartilage regions in 16 patellofemoral joints was evaluated to assess its feasibility in diagnosing patellofemoral chondromalacia. It demonstrated good correlation with arthroscopic reports and took about half of the examination time that FS 3D SPGR did. This modified, faster technique has the potential to diagnose patellofemoral chondromalacia with shorter examination time than FS 3D SPGR did.

The Flexibility Scale: Development and Preliminary Validation of a Cognitive Flexibility Measure in Children with Autism Spectrum Disorders.

PubMed

Strang, John F; Anthony, Laura G; Yerys, Benjamin E; Hardy, Kristina K; Wallace, Gregory L; Armour, Anna C; Dudley, Katerina; Kenworthy, Lauren

2017-08-01

Flexibility is a key component of executive function, and is related to everyday functioning and adult outcomes. However, existing informant reports do not densely sample cognitive aspects of flexibility; the Flexibility Scale (FS) was developed to address this gap. This study investigates the validity of the FS in 221 youth with ASD and 57 typically developing children. Exploratory factor analysis indicates a five-factor scale: Routines/rituals, transitions/change, special interests, social flexibility, and generativity. The FS demonstrated convergent and divergent validity with comparative domains of function in other measures, save for the Generativity factor. The FS discriminated participants with ASD and controls. Thus, this study suggests the FS may be a viable, comprehensive measure of flexibility in everyday settings.

Balanced optical-microwave phase detector for sub-femtosecond optical-RF synchronization

DOE PAGES

Peng, Michael Y.; Kalaydzhyan, Aram; Kärtner, Franz X.

2014-10-23

We demonstrate that balanced optical-microwave phase detectors (BOMPD) are capable of optical-RF synchronization with sub-femtosecond residual timing jitter for large-scale timing distribution systems. RF-to-optical synchronization is achieved with a long-term stability of < 1 fs RMS and < 7 fs pk-pk drift for over 10 hours and short-term stability of < 2 fs RMS jitter integrated from 1 Hz to 200 kHz as well as optical-to-RF synchronization with 0.5 fs RMS jitter integrated from 1 Hz to 20 kHz. Moreover, we achieve a –161 dBc/Hz noise floor that integrates well into the sub-fs regime and measure a nominal 50-dB AM-PMmore » suppression ratio with potential improvement via DC offset adjustment.« less

Quantum Computation Based on Photons with Three Degrees of Freedom

PubMed Central

Luo, Ming-Xing; Li, Hui-Ran; Lai, Hong; Wang, Xiaojun

2016-01-01

Quantum systems are important resources for quantum computer. Different from previous encoding forms using quantum systems with one degree of freedom (DoF) or two DoFs, we investigate the possibility of photon systems encoding with three DoFs consisting of the polarization DoF and two spatial DoFs. By exploring the optical circular birefringence induced by an NV center in a diamond embedded in the photonic crystal cavity, we propose several hybrid controlled-NOT (hybrid CNOT) gates operating on the two-photon or one-photon system. These hybrid CNOT gates show that three DoFs may be encoded as independent qubits without auxiliary DoFs. Our result provides a useful way to reduce quantum simulation resources by exploring complex quantum systems for quantum applications requiring large qubit systems. PMID:27174302

Quantum Computation Based on Photons with Three Degrees of Freedom.

PubMed

Luo, Ming-Xing; Li, Hui-Ran; Lai, Hong; Wang, Xiaojun

2016-05-13

Quantum systems are important resources for quantum computer. Different from previous encoding forms using quantum systems with one degree of freedom (DoF) or two DoFs, we investigate the possibility of photon systems encoding with three DoFs consisting of the polarization DoF and two spatial DoFs. By exploring the optical circular birefringence induced by an NV center in a diamond embedded in the photonic crystal cavity, we propose several hybrid controlled-NOT (hybrid CNOT) gates operating on the two-photon or one-photon system. These hybrid CNOT gates show that three DoFs may be encoded as independent qubits without auxiliary DoFs. Our result provides a useful way to reduce quantum simulation resources by exploring complex quantum systems for quantum applications requiring large qubit systems.

Cell optoporation with a sub-15 fs and a 250-fs laser

NASA Astrophysics Data System (ADS)

Breunig, Hans Georg; Batista, Ana; Uchugonova, Aisada; König, Karsten

2016-06-01

We employed two commercially available femtosecond lasers, a Ti:sapphire and a ytterbium-based oscillator, to directly compare from a user's practical point-of-view in one common experimental setup the efficiencies of transient laser-induced cell membrane permeabilization, i.e., of so-called optoporation. The experimental setup consisted of a modified multiphoton laser-scanning microscope employing high-NA focusing optics. An automatic cell irradiation procedure was realized with custom-made software that identified cell positions and controlled relevant hardware components. The Ti:sapphire and ytterbium-based oscillators generated broadband sub-15-fs pulses around 800 nm and 250-fs pulses at 1044 nm, respectively. A higher optoporation rate and posttreatment viability were observed for the shorter fs pulses, confirming the importance of multiphoton effects for efficient optoporation.

Comparison of chirped-probe-pulse and hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering for combustion thermometry.

PubMed

Richardson, Daniel R; Stauffer, Hans U; Roy, Sukesh; Gord, James R

2017-04-10

A comparison is made between two ultrashort-pulse coherent anti-Stokes Raman scattering (CARS) thermometry techniques-hybrid femtosecond/picosecond (fs/ps) CARS and chirped-probe-pulse (CPP) fs-CARS-that have become standards for high-repetition-rate thermometry in the combustion diagnostics community. These two variants of fs-CARS differ only in the characteristics of the ps-duration probe pulse; in hybrid fs/ps CARS a spectrally narrow, time-asymmetric probe pulse is used, whereas a highly chirped, spectrally broad probe pulse is used in CPP fs-CARS. Temperature measurements were performed using both techniques in near-adiabatic flames in the temperature range 1600-2400 K and for probe time delays of 0-30 ps. Under these conditions, both techniques are shown to exhibit similar temperature measurement accuracies and precisions to previously reported values and to each other. However, it is observed that initial calibration fits to the spectrally broad CPP results require more fitting parameters and a more robust optimization algorithm and therefore significantly increased computational cost and complexity compared to the fitting of hybrid fs/ps CARS data. The optimized model parameters varied more for the CPP measurements than for the hybrid fs/ps measurements for different experimental conditions.

Bacterial Biotransformation of Pentachlorophenol and Micropollutants Formed during Its Production Process

PubMed Central

Lopez-Echartea, Eglantina; Macek, Tomas; Demnerova, Katerina; Uhlik, Ondrej

2016-01-01

Pentachlorophenol (PCP) is a toxic and persistent wood and cellulose preservative extensively used in the past decades. The production process of PCP generates polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) as micropollutants. PCDD/Fs are also known to be very persistent and dangerous for human health and ecosystem functioning. Several physico-chemical and biological technologies have been used to remove PCP and PCDD/Fs from the environment. Bacterial degradation appears to be a cost-effective way of removing these contaminants from soil while causing little impact on the environment. Several bacteria that cometabolize or use these pollutants as their sole source of carbon have been isolated and characterized. This review summarizes current knowledge on the metabolic pathways of bacterial degradation of PCP and PCDD/Fs. PCP can be successfully degraded aerobically or anaerobically by bacteria. Highly chlorinated PCDD/Fs are more likely to be reductively dechlorinated, while less chlorinated PCDD/Fs are more prone to aerobic degradation. The biochemical and genetic basis of these pollutants’ degradation is also described. There are several documented studies of effective applications of bioremediation techniques for the removal of PCP and PCDD/Fs from soil and sediments. These findings suggest that biodegradation can occur and be applied to treat these contaminants. PMID:27869691

[Atmospheric emission of PCDD/Fs from secondary aluminum metallurgy industry in the southwest area, China].

PubMed

Lu, Yi; Zhang, Xiao-Ling; Guo, Zhi-Shun; Jian, Chuan; Zhu, Ming-Ji; Deng, Li; Sun, Jing; Zhang, Qin

2014-01-01

Five secondary aluminum metallurgy enterprises in the southwest area of China were measured for emissions of PCDD/Fs. The results indicated that the emission levels of PCDD/Fs (as TEQ) were 0.015-0.16 ng x m(-3), and the average was 0.093 ng x m(-3) from secondary aluminum metallurgy enterprises. Emission factors of PCDD/Fs (as TEQ) from the five secondary aluminum metallurgy enterprises varied between 0.041 and 4.68 microg x t(-1) aluminum, and the average was 2.01 microg x t(-1) aluminum; among them, PCDD/Fs emission factors from the crucible smelting furnace was the highest. Congener distribution of PCDD/F in stack gas from the five secondary aluminum metallurgies was very different from each other. Moreover, the R(PCDF/PCDD) was the lowest in the enterprise which was installed only with bag filters; the R(PCDF/PCDD) were 3.8-12.6 (the average, 7.7) in the others which were installed with water scrubbers. The results above indicated that the mechanism of PCDD/Fs formation was related to the types of exhaust gas treatment device. The results of this study can provide technical support for the formulation of PCDD/Fs emission standards and the best available techniques in the secondary aluminum metallurgy industry.

Well-Defined Peapod-like Magnetic Nanoparticles and Their Controlled Modification for Effective Imaging Guided Gene Therapy.

PubMed

Wang, Ranran; Hu, Yang; Zhao, Nana; Xu, Fu-Jian

2016-05-11

Due to their unique properties, one-dimensional (1D) magnetic nanostructures are of great significance for biorelated applications. A facile and straightforward strategy to fabricate 1D magnetic structure with special shapes is highly desirable. In this work, well-defined peapod-like 1D magnetic nanoparticles (Fe3O4@SiO2, p-FS) are readily synthesized by a facile method without assistance of any templates, magnetic string or magnetic field. There are few reports on 1D gene carriers based on Fe3O4 nanoparticles. BUCT-PGEA (ethanolamine-functionalized poly(glycidyl methacrylate) is subsequently grafted from the surface of p-FS nanoparticles by atom transfer radical polymerization to construct highly efficient gene vectors (p-FS-PGEA) for effective biomedical applications. Peapod-like p-FS nanoparticles were proven to largely improve gene transfection performance compared with ordinary spherical Fe3O4@SiO2 nanoparticles (s-FS). External magnetic field was also utilized to further enhance the transfection efficiency. Moreover, the as-prepared p-FS-PGEA gene carriers could combine the magnetic characteristics of p-FS to well achieve noninvasive magnetic resonance imaging (MRI). We show here novel and multifunctional magnetic nanostructures fabricated for biomedical applications that realized efficient gene delivery and real-time imaging at the same time.

Wound healing and degradation of the fibrin sealant Beriplast P following partial liver resection in rabbits.

PubMed

Kroez, Monika; Lang, Wiegand; Dickneite, Gerhard

2005-01-01

The objective of this study was to investigate the degradation kinetics of the fibrin sealant (FS) Beriplast P in an experimental liver surgery model in rabbits. A partial liver resection was performed in 21 rabbits, and the wound area covered with Beriplast P to ensure hemostasis. Wound healing of the resection sites was evaluated morphologically over 11 weeks. Degradation of the FS was evaluated by measuring the thickness of the remaining fibrin layer. Plasma samples were analyzed for antibodies against fibrinogen, albumin, thrombin, fibrin, and factor XIII. No postoperative hemorrhage was observed, indicating successful hemostasis throughout. The FS was degraded with a half-life of about 25 days postapplication and was completely replaced by granulation tissue within 9 weeks. The FS degradation and tissue development followed the general stages of wound healing: inflammation and resorption, proliferation, organization and production of collagen, maturation, and scarring. An immune reaction was elicited against the main four human proteins of the FS. The antibody titers peaked on day 14, with a gradual decrease thereafter. We conclude that the FS accomplished hemostasis, facilitated healing in accordance with natural processes, and was completely degraded over time. In humans, the reduced immunogenicity of the FS would potentially increase its degradation half-life.

Experts' views regarding Australian school-leavers' knowledge of nutrition and food systems.

PubMed

Sadegholvad, Sanaz; Yeatman, Heather; Parrish, Anne-Maree; Worsley, Anthony

2017-10-01

To explore Australian experts' views regarding strengths and gaps in school-leavers' knowledge of nutrition and food systems ( N&FS) and factors that influence that knowledge. Semi-structured interviews were conducted with 21 highly experienced food-related experts in Australia. Qualitative data were analysed thematically using Attride-Stirling's thematic network framework. Two global themes and several organising themes were identified. The first global theme, 'structural curriculum-based problems', emerged from three organising themes of: inconsistencies in provided food education programs at schools in Australia; insufficient coverage of food-related skills and food systems topics in school curricula; and the lack of trained school teachers. The second global theme, 'insufficient levels of school-leavers knowledge of N&FS ', was generated from four organising themes, which together described Australian school-leavers' poor knowledge of N&FS more broadly and knowledge translation problem for everyday practices. Study findings identified key problems relating to current school-based N&FS education programs in Australia and reported knowledge gaps in relation to N&FS among Australian school-leavers. These findings provide important guidance for N&FS curriculum development, to clearly articulate broadly-based N&FS knowledge acquisition in curriculum policy and education documents for Australian schools. © 2017 The Authors.

Prediction of secondary generalization from a focal onset seizure in intracerebral EEG.

PubMed

Karthick, P A; Tanaka, Hideaki; Khoo, Hui Ming; Gotman, Jean

2018-05-01

We propose a system based on the first five seconds of intracerebrally recorded focal seizures to predict their evolution from focal to bilateral tonic-clonic seizure (FTC), to spread outside the onset zone but without tonic-clonic component (FS), or to a seizure remaining focal (F). Nineteen time and frequency domain features were extracted from 39 seizures of 32 patients and were subjected to support vector machine based classification. Three prediction approaches regarding seizure evolution were (1) FTC vs FS vs F, (2) FTC vs FS or F and (3) FTC or FS vs F. We used 21 seizures for training. Most features had significantly different distributions in the three seizure types (p < 0.05). Eighteen seizures were used for testing. We predicted the evolution of 12 seizures in FTC vs FS vs F, 13 seizures in FTC vs FS or F and 14 seizures in FTC or FS vs F. The first five seconds of a focal seizure contains information regarding the eventual evolution of the seizure, which could be predicted in most seizures. The proposed system could alert the health care team when a patient is hospitalized for intracerebral EEG and improve safety and eventually result in an implantable device. Copyright © 2018 International Federation of Clinical Neurophysiology. Published by Elsevier B.V. All rights reserved.

[Atmospheric emission of PCDD/Fs from modern dry processing cement kilns with preheating in the southwest area, China].

PubMed

Zhang, Xiao-Ling; Lu, Yi; Jian, Chuan; Guo, Zhi-Shun; Zhu, Ming-Ji; Deng, Li; Sun, Jing; Zhang, Qin

2014-01-01

Six cement kilns were measured for emissions of PCDD/Fs in the Southwest Area, China. The results indicated that the emission levels of PCDD/Fs were 0.0029-0.0062 ng-m(-3) (Average, 0.0043 ng X m(-3)) from cement kilns which did not burn solid waste, and 0.028 ng X m(-3) from co-processing sewage sludge in cement kiln. The levels of PCDD/Fs emissions from cement manufacturing in the Southwest Area were significantly below the national emissions standard (0.1 ng x m(-3)). Emission factors of PCDD/Fs from the six cement kilns varied between 0.0089 and 0.084 microg x t(-1) cement, which were near or below the lowest emission factor reported by UNEP in 2005. Moreover, the emission factor of PCDD/Fs from co-processing sewage sludge in cement kiln was 7.6 times of the average factors from the other five cement kilns. Moreover,congener distribution of PCDD/F in stack gas from the two types of cement kilns was very different. The results showed that modern dry process cement kilns with preheating have lower emissions of PCDD/Fs. This suggested that the product of co-processing solid waste in cement kilns should be largely enhanced in China in future.

Did municipal solid waste landfill have obvious influence on polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in ambient air: A case study in East China.

PubMed

Li, Jiafu; Wang, Chong; Du, Lei; Lv, Zhiwei; Li, Xiaonan; Hu, Xuepeng; Niu, Zhiguang; Zhang, Ying

2017-04-01

Municipal solid waste (MSW) landfill was a main way to disposal of MSW and almost 95% of MSW was disposed by landfills in the world. In order to understand the influence of MSW landfill on polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in surrounding atmosphere, 42 ambient air samples were collected and analyzed from surrounding sites, background site, upwind site and downwind site of a MSW landfill in East China. The results of present study were summarized as follows. (1) The total concentrations of PCDD/Fs (∑PCDD/Fs) in ambient air from surrounding sites, background site, upwind site and downwind site were 2.215±1.004, 2.058±0.458, 2.617±1.092 and 1.822±0.566pgNm -3 , respectively. (2) The toxic equivalent concentrations (TEQ) of PCDD/Fs in ambient air from surrounding sites, background site, upwind site and downwind site were 0.103±0.017, 0.096±0.015, 0.120±0.024 and 0.108±0.014pg I-TEQNm -3 , respectively. (3) The congener profiles, ∑PCDD/Fs and TEQ between background atmosphere and surrounding atmosphere of landfill did not show statistically significant difference. (4) The ∑PCDD/Fs and TEQ in ambient air of downwind site were not higher than that of upwind site, suggesting that studied landfill did not have obvious influence on PCDD/Fs in ambient air from downwind site. (5) The 95th percentile carcinogenic risk (CR) of PCDD/Fs in ambient air from surrounding sites, background site, upwind site and downwind site were 8.03×10 -9 , 7.57×10 -9 , 9.69×10 -9 and 8.15×10 -9 , respectively, which were much lower than the threshold value of CR (10 -6 ), suggesting that studied landfill did not influence the CR of PCDD/Fs in surrounding atmosphere and negligible cancer risk occurred. (6) The non-carcinogenic risk (non-CR) analysis indicated that landfill did not have influence on the non-CR of PCDD/Fs in surrounding atmosphere and no obvious non-carcinogenic effects developed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Remote down-hole well telemetry

DOEpatents

Briles, Scott D [Los Alamos, NM; Neagley, Daniel L [Albuquerque, NM; Coates, Don M [Santa Fe, NM; Freund, Samuel M [Los Alamos, NM

2004-07-20

The present invention includes an apparatus and method for telemetry communication with oil-well monitoring and recording instruments located in the vicinity of the bottom of gas or oil recovery pipes. Such instruments are currently monitored using electrical cabling that is inserted into the pipes; cabling has a short life in this environment, and requires periodic replacement with the concomitant, costly shutdown of the well. Modulated reflectance, a wireless communication method that does not require signal transmission power from the telemetry package will provide a long-lived and reliable way to monitor down-hole conditions. Normal wireless technology is not practical since batteries and capacitors have to frequently be replaced or recharged, again with the well being removed from service. RF energy generated above ground can also be received, converted and stored down-hole without the use of wires, for actuating down-hole valves, as one example. Although modulated reflectance reduces or eliminates the loss of energy at the sensor package because energy is not consumed, during the transmission process, additional stored extra energy down-hole is needed.

Are condom instructions readable? Results of a readability study.

PubMed Central

Richwald, G A; Wamsley, M A; Coulson, A H; Morisky, D E

1988-01-01

The use of condoms has assumed a central position in the current strategy to prevent sexual transmission of the human immunodeficiency virus. The effectiveness of condoms in disease prophylaxis is dependent, to a degree, on their correct use. Condom manufacturers routinely include information on condom use either printed on the actual package or in an enclosed package insert. With the use of three readability formulas, the reading grade level was determined for 14 different sets of instructions included with 25 brands of condoms manufactured by 7 domestic and 1 overseas manufacturer. The readability formulas, when applied to instructions for condom use, estimated that, conservatively, 8 of the 14 instructions required at least reading at the level of a high school graduate and none required less than a 10th grade level. Clearly written instructions and simple concepts could assist current and future condom users in the correct use of condoms and improve the effectiveness of condoms in the prevention of AIDS and other sexually transmitted diseases. PMID:3136494

Variable Depth Bragg Peak Method for Single Event Effects Testing

NASA Technical Reports Server (NTRS)

Buchner, S.; Kanyogoro, N.; Foster, C.; O'Neill, P.

2011-01-01

Traditionally, accelerator SEE testing is accomplished by removing the tops of packages so that the IC chips are accessible to heavy ions. However, ICs in some advanced packages cannot be de-lidded so a different approach is used that involves grinding and/or chemically etching away part of the package and the chip from the back side. The parts are then tested from the back side with ions having sufficient range to reach the sensitive volume. More recently, the entire silicon substrate in an SOI/SRAM was removed, making it possible to use low-energy ions with shorter ranges. Where removal of part of the package is not possible, facilities at Michigan State, NASA Space Radiation Laboratory, GANIL (France) and GSI (Germany) offer high-energy heavy ions with long ranges so that the ions can reach the devices' sensitive volumes without much change in the LET. Unfortunately, a run will typically involve only one ion species having a single energy and LET due to the long time it takes to tune a new energy. The Variable Depth Bragg Peak (VDBP) method is similar to the above method in that it involves the use of high-energy heavy ions that are able to pass through the packaging material and reach the device, obviating the need to remove the package. However, the method provides a broad range of LETs from a single ion by inserting degraders in the beam that modify the ion energy and, therefore, the LET. The crux of the method involves establishing a fiduciary point for degrader thickness, i.e., where the Bragg peak is located precisely at the sensitive volume in the device, for which the measured SEU cross-section and the ion LET are both also maxima and can be calculated using a Monte-Carlo program, TRIM. Once the fiduciary point has been established, calibrated high density polyethylene (HDPE) degraders are inserted into or removed from the beam to vary the ion LET at the device in a known manner. After each change of degrader thickness, the SEU cross-section is measured and the corresponding LET calculated from the change in degrader thickness. That information is used to generate a plot of cross-section as a function of ion LET. The advantages of this approach are that the part does not have to be de-lidded and a broad range of LETs is available from a single heavy ion without having to go to non-normal angles of incidence to change the "effective" LET. As we will show, it is possible to obtain an entire curve of cross-section versus LET using just two or three ions. Fig. 1 shows curves of cross-section vs LET for a Freescale 4 Mbit SOI/SRAM measured at the 88" Cyclotron at Berkeley and at NSRL. The open symbols are the data obtained from Berkeley for top-side and back-side irradiation. The solid data points are for the data obtained at NSRL using a device for which the package was intact. The data are for Iron and Gold and cover a range of LETs from 4 MeV.cm2/mg to 84 MeV.cm2/mg. The agreement between the data obtained from Berkeley and from NSRL is excellent, demonstrating that the VDBP method is capable of providing accurate values of cross-section versus LET, at least for the 4 Mbit SRAM. Details of the technique will be included in the final presentation.

The T-cell receptor beta chain CDR3 region of BV8S1/BJ1S5 transcripts in type 1 diabetes.

PubMed

Naserke, H E; Durinovic-Bellò, I; Seidel, D; Ziegler, A G

1996-01-01

We recently described the T-cell receptor (TCR) beta chain CDR3 motif S-SDRLG-NQPQH (BV8S1-BJ1S5) in an islet-specific T-cell clone (K2.12) from a type 1 diabetic patient (AS). A similar motif (RLGNQ) was also reported in a T-cell clone of non-obese diabetic (NOD) mice by others. In order to determine the frequency of our motif in selected and unselected T-cell populations, we cloned and sequenced the CDR3 region of BV8S1-BJ1S5 transcripts. These transcripts were derived from unstimulated peripheral blood T lymphocytes from two type 1 diabetic patients (AS and FS) and their non-diabetic sibling (WS), as well as from an islet-specific T-cell line of one of the patients. In addition, we compared the structure and composition of the CDR3 region in BV8S1-BJ1S5 transcripts from peripheral blood T cells between the patients and their non-diabetic sibling (>50 sequences each). We found that 30% of the islet-specific T-cell line cDNA clones expressed the entire sequence-motif, whereas it was absent in the clones of unstimulated peripheral blood T cells from both patients and their non-diabetic sibling. The average length of the CDR3 region was shorter in the patients (mean AS 9.9, FS 9.9, versus WS 10.7, p = 0.0037) and the number of inserted nucleotides in N nucleotide addition at the DJ-junction lower (mean AS 3.5, FS 3. 2, versus WS 5.2, P = <10(-4)) as compared with their non-diabetic sibling. Moreover, the pattern of amino acid usage in the CDR3 region was dissimilar at positions 5 and 6, where polar amino acids predominated in both diabetic siblings. In contrast, basic amino acids are preferentially used at position 5 in the clones of the non-diabetic sibling. These data provide information on the general structure of the TCR(BV8S1-BJ1S5) CDR3 region in type 1 diabetes and may indicate differences in the amino and nucleic acid composition of the TCR beta chain CDR3 region between two type 1 diabetic patients and their non-diabetic sibling.

Estimation of gross primary production and light use efficiency by the tower-based sun-induced fluorescence measurement in the Japanese evergreen coniferous forest

NASA Astrophysics Data System (ADS)

Tsujimoto, K.; Kato, T.; Hirano, T.; Saitoh, T. M.; Nagai, S.; Akitsu, T.; Nasahara, K. N.

2015-12-01

Chlorophyll fluorescence (ChlF) is emitted from chlorophyll a and b to release the excess sun-light energy. Recently, ChlF has been utilized to represent the ecosystem photosynthetic activity, i.e. gross primary production (GPP), by the satellite remote-sensing studies (e.g. Frankenberg et al., 2011). Despite its high expectation, small number of ecosystem-level ChlF observation at the ground reduces its availability. The aim of this study is to clarify the relationships between ChlF, and photosynthesis and light use efficiency (LUE) by the ground based measurement in the forest. The observations were carried out in the evergreen coniferous forest in Takayama, Japan, from March 2008 to February 2009. Downward and upward spectral radiances were measured with hemispherical spectroradiometer (MS-700, Eko Instruments, Japan) mounted at 30m-high above the ground surface. We calculated Sun-Induced fluorescence (FS) around the O2-A band (760 nm) from the spectral data with the Fraunhofer Line Depth method. The GPP was calculated from the carbon fluxes measured with eddy covariance at the top of the tower. FS showed the strong correlation to GPP linearly in the diurnal course (sunny day (8 August, 2008): r2 = 0.81, cloudy day (28 July, 2008): r2 = 0.87). In addition, GPP was fitted against FS by rectangular hyperbolic curve. (r2 = 0.87 (daily)). We also investigated the relationship between FS and LUE in daily averages. The FS-LUE relationship could be regressed by logarithm curve for each month (r2 = 0.46 ˜0.95). The seasonal changes in the regression coefficients for FS-GPP and FS-LUE curves were thought to be induced by the seasonal variation in the temperature-dependency of photosynthesis and the phenology. We conclude that FS can be utilized to estimate GPP and LUE in evergreen forest, and that relationship between FS and GPP is influenced by environmental factors such as PAR and air temperature.Chlorophyll fluorescence (ChlF) is emitted from chlorophyll a and b to release the excess sun-light energy. Recently, ChlF has been utilized to represent the ecosystem photosynthetic activity, i.e. gross primary production (GPP), by the satellite remote-sensing studies (e.g. Frankenberg et al., 2011). Despite its high expectation, small number of ecosystem-level ChlF observation at the ground reduces its availability. The aim of this study is to clarify the relationships between ChlF, and photosynthesis and light use efficiency (LUE) by the ground based measurement in the forest. The observations were carried out in the evergreen coniferous forest in Takayama, Japan, from March 2008 to February 2009. Downward and upward spectral radiances were measured with hemispherical spectroradiometer (MS-700, Eko Instruments, Japan) mounted at 30m-high above the ground surface. We calculated Sun-Induced fluorescence (FS) around the O2-A band (760 nm) from the spectral data with the Fraunhofer Line Depth method. The GPP was calculated from the carbon fluxes measured with eddy covariance at the top of the tower. FS showed the strong correlation to GPP linearly in the diurnal course (sunny day (8 August, 2008): r2 = 0.81, cloudy day (28 July, 2008): r2 = 0.87). In addition, GPP was fitted against FS by rectangular hyperbolic curve. (r2 = 0.87 (daily)). We also investigated the relationship between FS and LUE in daily averages. The FS-LUE relationship could be regressed by logarithm curve for each month (r2 = 0.46 ˜0.95). The seasonal changes in the regression coefficients for FS-GPP and FS-LUE curves were thought to be induced by the seasonal variation in the temperature-dependency of photosynthesis and the phenology. We conclude that FS can be utilized to estimate GPP and LUE in evergreen forest, and that relationship between FS and GPP is influenced by environmental factors such as PAR and air temperature.

Fibrin Sealant Improves Hemostasis in Peripheral Vascular Surgery: A Randomized Prospective Trial

PubMed Central

Schenk, Worthington G.; Burks, Sandra G.; Gagne, Paul J.; Kagan, Steven A.; Lawson, Jeffrey H.; Spotnitz, William D.

2003-01-01

Objective To evaluate the efficacy and safety of an investigational fibrin sealant (FS) in a randomized prospective, partially blinded, controlled, multicenter trial. Summary Background Data Upper extremity vascular access surgery using polytetrafluorethylene (PTFE) graft placement for dialysis was chosen as a reproducible, clinically relevant model for evaluating the usefulness of FS. The FS consisted of pooled human fibrinogen (60 mg/mL) and thrombin (500 NIH U/mL). Time to hemostasis was measured, and adverse events were monitored. Methods Consenting adult patients (n = 48) undergoing placement of a standard PTFE graft were randomized in a 2:1:1 ratio to the treatment group using FS (ZLB Bioplasma AG, Bern, Switzerland), oxidized regenerated cellulose (Surgicel, Johnson & Johnson, New Brunswick, NJ), or pressure. Patients received heparin (3,000 IU IVP) before placement of vascular clamps. If the treatment was FS, clamps were left in place for 120 seconds after the application of study material to permit polymerization. If treatment was Surgicel, clamps were left in place until the agent had been applied according to manufacturer’s instructions. If the treatment was pressure, clamps were released as soon as the investigator was ready to apply compression. Immediately after release of the last clamp, the arterial and venous suture lines were evaluated for bleeding. The time to hemostasis at both the venous and arterial sites was recorded. Results Significant (P ≤ .005) reduction in time to hemostasis was achieved in the FS group. Thirteen (54.2%) patients randomized to FS experienced immediate hemostasis at both suture lines following clamp removal compared to no patients using Surgicel or pressure. Only one patient (7.1%) in the Surgicel group and no patients in the pressure group experienced hemostasis at 120 seconds from clamp removal, compared to 13 (54.2%) patients for FS. Adverse events were comparable in all groups. There were no seroconversions. Conclusions FS achieved more rapid hemostasis than traditional techniques in this peripheral vascular procedure. FS use appeared to be safe for this procedure. PMID:12796584

Activation and inhibition of adenylyl cyclase isoforms by forskolin analogs.

PubMed

Pinto, Cibele; Papa, Dan; Hübner, Melanie; Mou, Tung-Chung; Lushington, Gerald H; Seifert, Roland

2008-04-01

Adenylyl cyclase (AC) isoforms 1 to 9 are differentially expressed in tissues and constitute an interesting drug target. ACs 1 to 8 are activated by the diterpene, forskolin (FS). It is unfortunate that there is a paucity of AC isoform-selective activators. To develop such compounds, an understanding of the structure/activity relationships of diterpenes is necessary. Therefore, we examined the effects of FS and nine FS analogs on ACs 1, 2, and 5 expressed in Spodoptera frugiperda insect cells. Diterpenes showed the highest potencies at AC1 and the lowest potencies at AC2. We identified full agonists, partial agonists, antagonists, and inverse agonists, i.e., diterpenes that reduced basal AC activity. Each AC isoform exhibited a distinct pharmacological profile. AC2 showed the highest basal activity of all AC isoforms and highest sensitivity to inverse agonistic effects of 1-deoxy-forskolin, 7-deacetyl-1,9-dideoxy-forskolin, and, particularly, BODIPY-forskolin. In contrast, BODIPY-forskolin acted as partial agonist at the other ACs. 1-Deoxy-forskolin analogs were devoid of agonistic activity at ACs but antagonized the effects of FS in a mixed competitive/noncompetitive manner. At purified catalytic AC subunits, BODIPY-forskolin acted as weak partial agonist/strong partial antagonist. Molecular modeling revealed that the BODIPY group rotates promiscuously outside of the FS-binding site. Collectively, ACs are not uniformly activated and inhibited by FS and FS analogs, demonstrating the feasibility to design isoform-selective FS analogs. The two- and multiple-state models, originally developed to conceptualize ligand effects at G-protein-coupled receptors, can be applied to ACs to explain certain experimental data.

Fecal sludge management in developing urban centers: a review on the collection, treatment, and composting.

PubMed

Odey, Emmanuel Alepu; Li, Zifu; Zhou, Xiaoqin; Kalakodio, Loissi

2017-10-01

The problems posed by fecal sludge (FS) are multidimensional because most cities rapidly urbanize, which results in the increase in population, urban settlement, and waste generation. Issues concerning health and waste treatment have continued to create alarming situations. These issues had indeed interfered with the proper steps in managing FS, which contaminates the environment. FS can be used in agriculture as fertilizer because it is an excellent source of nutrients. The recent decline in crop production due to loss of soil organic component, erosion, and nutrient runoff has generated interest in the recycling of FS into soil nutrients through stabilization and composting. However, human feces are considerably liable to spread microorganisms to other persons. Thus, sanitation, stabilization, and composting should be the main objectives of FS treatment to minimize the risk to public and environmental health. This review presents an improved FS management (FSM) and technology option for soil amendment that is grouped into three headings, namely, (1) collection, (2) treatment, and (3) composting. On the basis of the literature review, the main problems associated with the collection and treatment of FS, such as inadequate tools and improper treatment processes, are summarized, and the trends and challenges that concern the applicability of each of the technologies in developing urban centers are critically reviewed. Stabilization during pretreatment before composting is suggested as the best method to reduce pathogens in FS. Results are precisely intended to be used as a support for decisions on policies and strategies for FSM and investments for improved treatment facilities.

Tobacco expenditure, smoking-induced deprivation and financial stress: results from the International Tobacco Control (ITC) Four-Country Survey.

PubMed

Siahpush, Mohammad; Borland, Ron; Yong, Hua-Hie; Cummings, K Michael; Fong, Geoffrey T

2012-07-01

While higher tobacco prices lead to a reduction in smoking prevalence, there is a concern that paying more for cigarettes can lead to excess financial burden. Our primary aim was to examine the association of daily cigarette expenditure with smoking-induced deprivation (SID) and financial stress (FS). We used data from wave 7 (2008-2009) of the International Tobacco Control (ITC) Four-Country Survey which is a survey of smokers in Canada, the USA, the UK and Australia (n = 5887). Logistic regressions were used to assess the association of daily cigarette expenditure with SID and FS. In multivariate analyses, a one standard deviation increase in daily cigarette expenditure was associated with an increase of 24% (P = 0.004) in the probability of experiencing SID. While we found no association between daily cigarette expenditure and FS, we found that SID is a strong predictor of FS (odds ratio 6.25; P < 0.001). This suggests that cigarette expenditure indirectly affects FS through SID. Results showed no evidence of an interaction between cigarette expenditure and income or education in their effect on SID or FS. Our results imply that spending more on tobacco may result in SID but surprisingly has no direct effect on FS. While most smokers may be adjusting their incomes and consumption to minimise FS, some fail to do so occasionally as indexed by the SID measure. Future studies need to prospectively examine the effect of increased tobacco expenditure on financial burden of smokers. © 2012 Australasian Professional Society on Alcohol and other Drugs.

Functional status and mortality prediction in community-acquired pneumonia.

PubMed

Jeon, Kyeongman; Yoo, Hongseok; Jeong, Byeong-Ho; Park, Hye Yun; Koh, Won-Jung; Suh, Gee Young; Guallar, Eliseo

2017-10-01

Poor functional status (FS) has been suggested as a poor prognostic factor in both pneumonia and severe pneumonia in elderly patients. However, it is still unclear whether FS is associated with outcomes and improves survival prediction in community-acquired pneumonia (CAP) in the general population. Data on hospitalized patients with CAP and FS, assessed by the Eastern Cooperative Oncology Group (ECOG) scale were prospectively collected between January 2008 and December 2012. The independent association of FS with 30-day mortality in CAP patients was evaluated using multivariable logistic regression. Improvement in mortality prediction when FS was added to the CRB-65 (confusion, respiratory rate, blood pressure and age 65) score was evaluated for discrimination, reclassification and calibration. The 30-day mortality of study participants (n = 1526) was 10%. Mortality significantly increased with higher ECOG score (P for trend <0.001). In multivariable analysis, ECOG ≥3 was strongly associated with 30-day mortality (adjusted OR: 5.70; 95% CI: 3.82-8.50). Adding ECOG ≥3 significantly improved the discriminatory power of CRB-65. Reclassification indices also confirmed the improvement in discrimination ability when FS was combined with the CRB-65, with a categorized net reclassification index (NRI) of 0.561 (0.437-0.686), a continuous NRI of 0.858 (0.696-1.019) and a relative integrated discrimination improvement in the discrimination slope of 139.8 % (110.8-154.6). FS predicted 30-day mortality and improved discrimination and reclassification in consecutive CAP patients. Assessment of premorbid FS should be considered in mortality prediction in patients with CAP. © 2017 Asian Pacific Society of Respirology.

Overview of the PCDD/Fs degradation potential and formation risk in the application of advanced oxidation processes (AOPs) to wastewater treatment.

PubMed

Vallejo, Marta; Fresnedo San Román, M; Ortiz, Inmaculada; Irabien, Angel

2015-01-01

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are a family of unintentionally produced persistent organic pollutants (POPs) that have received considerable public and scientific attention due to the toxicity of some of their congeners, more specifically those with chlorine substitution in the 2,3,7,8 positions. The environmental management and control of PCDD/Fs is addressed at a global level through the Stockholm Convention that establishes that POPs should be destroyed or irreversibly transformed in order to reduce or eliminate their release to the environment. Several technologies, including advanced oxidation processes (AOPs) such as photolysis, photocatalysis and Fenton oxidation, have been considered as effective methods for destroying PCDD/Fs in polluted waters. Nevertheless, during the remediation of wastewaters it is critical that the treatment technologies applied do not lead to the formation of by-products that are themselves POPs, especially if PCDD/Fs precursors or chlorine are present in the reaction medium. Despite the high effectiveness of AOPs in the oxidation of major contaminants, scarce references deal with the monitoring of PCDD/Fs in the course of the oxidation process, revealing that a detailed assessment of non-combustion technologies with respect to PCDD/Fs formation is still lacking. This study reports a review of the state of the art related to the potential remediation and/or formation of PCDD/Fs as a result of the application of AOPs for the treatment of polluted waters, warning on the correct selection of the operating conditions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Spatial variability of intake fractions for Canadian emission scenarios: a comparison between three resolution scales.

PubMed

Manneh, Rima; Margni, Manuele; Deschênes, Louise

2010-06-01

Spatially differentiated intake fractions (iFs) linked to Canadian emissions of toxic organic chemicals were developed using the multimedia and multipathways fate and exposure model IMPACT 2002. The fate and exposure of chemicals released to the Canadian environment were modeled with a single regional mass-balance model and three models that provided multiple mass-balance regions within Canada. These three models were based on the Canadian subwatersheds (172 zones), ecozones (15 zones), and provinces (13 zones). Releases of 32 organic chemicals into water and air were considered. This was done in order to (i) assess and compare the spatial variability of iFs within and across the three levels of regionalization and (ii) compare the spatial iFs to nonspatial ones. Results showed that iFs calculated using the subwatershed resolution presented a higher spatial variability (up to 10 orders of magnitude for emissions into water) than the ones based on the ecozones and provinces, implying that higher spatial resolution could potentially reduce uncertainty in iFs and, therefore, increase the discriminating power when assessing and comparing toxic releases for known emission locations. Results also indicated that, for an unknown emission location, a model with high spatial resolution such as the subwatershed model could significantly improve the accuracy of a generic iF. Population weighted iFs span up to 3 orders of magnitude compared to nonspatial iFs calculated by the one-box model. Less significant differences were observed when comparing spatial versus nonspatial iFs from the ecozones and provinces, respectively.

Photopatterned free-standing polyacrylamide gels for microfluidic protein electrophoresis.

PubMed

Duncombe, Todd A; Herr, Amy E

2013-06-07

Designed for compatibility with slab-gel polyacrylamide gel electrophoresis (PAGE) reagents and instruments, we detail development of free-standing polyacrylamide gel (fsPAG) microstructures supporting electrophoretic performance rivalling that of microfluidic platforms. For the protein electrophoresis study described here, fsPAGE lanes are comprised of a sample reservoir and contiguous separation gel. No enclosed microfluidic channels are employed. The fsPAG devices (120 μm tall) are directly photopatterned atop of and covalently attached to planar polymer or glass surfaces. Leveraging the fast <1 h design-prototype-test cycle - significantly faster than mold based fabrication techniques - we optimize the fsPAG architecture to minimize injection dispersion for rapid (<1 min) and short (1 mm) protein separations. The facile fabrication and prototyping of the fsPAGE provides researchers a powerful tool for developing custom analytical assays. We highlight the utility of assay customization by fabricating a polyacrylamide gel with a spatial pore-size distribution and demonstrate the resulting enhancement in separation performance over a uniform gel. Further, we up-scale from a unit separation to an array of 96 concurrent fsPAGE assays in 10 min run time driven by one electrode pair. The fsPAG array layout matches that of a 96-well plate to facilitate integration of the planar free standing gel array with multi-channel pipettes while remaining compatible with conventional slab-gel PAGE reagents, such as staining for label-free protein detection. Notably, the entire fsPAGE workflow from fabrication, to operation, and readout uses readily available materials and instruments - making this technique highly accessible.

High incidence of rainbow glare after femtosecond laser assisted-LASIK using the upgraded FS200 femtosecond laser.

PubMed

Zhang, Yu; Chen, Yue-Guo

2018-03-05

To compare the incidence of rainbow glare (RG) after femtosecond laser assisted-LASIK (FS-LASIK) using the upgraded FS200 femtosecond laser with different flap cut parameter settings. A consecutive series of 129 patients (255 eyes) who underwent FS-LASIK for correcting myopia and/or astigmatism using upgraded WaveLight FS200 femtosecond laser with the original settings was included in group A. Another consecutive series of 129 patients (255 eyes) who underwent FS-LASIK using upgraded WaveLight FS200 femtosecond laser with flap cut parameter settings changed (decreased pulse energy, spot and line separation) was included in group B. The incidence and fading time of RG, confocal microscopic image and postoperative clinical results were compared between the two groups. There were no differences between the two groups in age, baseline refraction, excimer laser ablation depth, postoperative uncorrected visual acuity and refraction. The incidence rate of RG in group A (35/255, 13.73%) was significantly higher than that in group B (4/255, 1.57%) (P < 0.05). The median fading time was 3 months in group A and 1 month in group B (P > 0.05).The confocal microscopic images showed wider laser spot spacing in group A than group B. The incidence of RG was significantly correlated with age and grouping (P < 0.05). The upgraded FS200 femtosecond laser with original flap cut parameter settings could increase the incidence of RG. The narrower grating size and lower pulse energy could ameliorate this side effect.

76 FR 29334 - Iroquois FS&LA, Watseka, IL; Approval of Conversion Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision [AC-62 OTS Nos. 03870 and H-4782] Iroquois FS&LA, Watseka, IL; Approval of Conversion Application Notice is hereby given that on May 13, 2011, the Office of Thrift Supervision approved the application of Iroquois FS & LA, Watseka, Illinois, to...

USDA-FS Termiticide report termiticide efficacy results for 2008

Treesearch

Terry Wagner; Joe Mulrooney; Thomas Shelton; Chris Peterson

2009-01-01

The United States Department of Agriculture Forest Service (USDA-FS) evaluates candidate termiticides for federal and state registration. In 2008, the USDA-FS administered 33 agreements with product manufacturers as part of its ongoing Termiticide Testing Program. Two termiticides were installed at the four national test sites in Florida (February), Arizona (April),...

Aggregation Bias and the Analysis of Necessary and Sufficient Conditions in fsQCA

ERIC Educational Resources Information Center

Braumoeller, Bear F.

2017-01-01

Fuzzy-set qualitative comparative analysis (fsQCA) has become one of the most prominent methods in the social sciences for capturing causal complexity, especially for scholars with small- and medium-"N" data sets. This research note explores two key assumptions in fsQCA's methodology for testing for necessary and sufficient…

Ultrafast gigantic photo-response in (EDO-TTF)2PF6 initiated by 10-fs laser pulses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schoenlein, Robert William; Itatani, Jiro; Rini, Matteo

2006-08-07

We photo-exited a charge-ordered organic salt (EDO-TTF)2PF6 with sub-10-fs optical pulses. The photo-induced metallic phase appeared within 80-fs after pumping, characterized by large changes in reflectivity (DELTA R/R~0.8) followed by strong coherent phonon modulation

Feature Sampling in Detection: Implications for the Measurement of Perceptual Independence

ERIC Educational Resources Information Center

Macho, Siegfried

2007-01-01

The article presents the feature sampling signal detection (FS-SDT) model, an extension of the multivariate signal detection (SDT) model. The FS-SDT model assumes that, because of attentional shifts, different subsets of features are sampled for different presentations of the same multidimensional stimulus. Contrary to the SDT model, the FS-SDT…

Nanoencapsulation of dietary flavonoid fisetin: Formulation and in vitro antioxidant and α-glucosidase inhibition activities.

PubMed

Sechi, Mario; Syed, Deeba N; Pala, Nicolino; Mariani, Alberto; Marceddu, Salvatore; Brunetti, Antonio; Mukhtar, Hasan; Sanna, Vanna

2016-11-01

The bioactive flavonoid fisetin (FS) is a diet-derived antioxidant that is being increasingly investigated for its health-promoting effects. Unfortunately, the poor physicochemical and pharmacokinetic properties affect and limit the clinical application. In this study, novel polymeric nanoparticles (NPs), based on Poly-(ε-caprolactone) (PCL) and PLGA-PEG-COOH, encapsulating FS were formulated as suitable oral controlled release systems. Results showed NPs having a mean diameter of 140-200nm, and a percent loading of FS ranging from 70 to 82%. In vitro release studies revealed that NPs are able to protect and preserve the release of FS in gastric simulated conditions, also controlling the release in the intestinal medium. Moreover, the DPPH and ABTS scavenging capacity of FS, as well as α-glucosidase inhibition activity, that resulted about 20-fold higher than commercial Acarbose, were retained during nanoencapsulation process. In summary, our developed NPs can be proposed as an attractive delivery system to control the release of antioxidant and anti-hyperglycemic FS for nutraceutical and/or therapeutic application. Copyright © 2016 Elsevier B.V. All rights reserved.

SAM-FS: LSC's New Solaris-Based Storage Management Product

NASA Technical Reports Server (NTRS)

Angell, Kent

1996-01-01

SAM-FS is a full featured hierarchical storage management (HSM) device that operates as a file system on Solaris-based machines. The SAM-FS file system provides the user with all of the standard UNIX system utilities and calls, and adds some new commands, i.e. archive, release, stage, sls, sfind, and a family of maintenance commands. The system also offers enhancements such as high performance virtual disk read and write, control of the disk through an extent array, and the ability to dynamically allocate block size. SAM-FS provides 'archive sets' which are groupings of data to be copied to secondary storage. In practice, as soon as a file is written to disk, SAM-FS will make copies onto secondary media. SAM-FS is a scalable storage management system. The system can manage millions of files per system, though this is limited today by the speed of UNIX and its utilities. In the future, a new search algorithm will be implemented that will remove logical and performance restrictions on the number of files managed.

Occurrence of polychlorinated dibenzo-p-dioxins, dibenzofurans and biphenyls pollution in sediments from the Haihe River and Dagu Drainage River in Tianjin City, China.

PubMed

Liu, Hanxia; Zhang, Qinghua; Wang, Yawei; Cai, Zongwei; Jiang, Guibin

2007-08-01

The pollution status of polychlorinated dibenzo-p-dioxins, dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) in the sediments of Haihe River, which is the most polluted among the seven largest basins in China, Dagu Drainage River flowing through a chemical industry zone, and two other rivers flowing into Bohai Sea in Tianjin City, China were investigated. The concentrations of PCDD/Fs and PCBs in the sediments from the mainstream of Haihe River were 1.3-26pgI-TEQg(-1) dry weight (dw) and 0.07-0.54pgTEQg(-1)dw, respectively. Heavy PCDD/Fs and PCBs pollution, with 1264pgI-TEQg(-1)dw and 21pgTEQg(-1)dw, was found in sediment from Dagu Drainage River. The congener profiles of PCDD/Fs indicated that the principal contamination source was the production of pentachlorophenol (PCP) or PCP-Na in this area. The correlation between PCDD/Fs or PCBs and total organic matter (TOM) showed that PCDD/Fs or PCBs were independent on TOM.

Femtosecond laser refractive surgery: small-incision lenticule extraction vs. femtosecond laser-assisted LASIK.

PubMed

Lee, Jimmy K; Chuck, Roy S; Park, Choul Yong

2015-07-01

Small-incision lenticule extraction (SMILE) is a novel technique devised to correct refractive errors. SMILE circumvents excimer laser photoablation of cornea, as the stromal lenticule cut by femtosecond laser is removed manually. Smaller incisions and preservation of anterior corneal biomechanical strength have been suggested as some of the advantages of SMILE over femtosecond laser-assisted LASIK (FS-LASIK). In this review, we compared previous published results of SMILE and FS-LASIK. The advantage, efficacy and safety of SMILE are compared with FS-LASIK. SMILE achieved similar efficacy, predictability and safety as FS-LASIK. Greater preservations of corneal biomechanical strength and corneal nerves were observed in SMILE when compared with LASIK or PRK. Additionally, the incidence of postoperative dry eye syndrome was found to be less problematic in SMILE than in FS-LASIK. SMILE is a promising new surgery for refractive error correction. Prospective and retrospective studies of SMILE have shown that results of SMILE are similar to FS-LASIK. With advances in femtosecond laser technology, SMILE may gain greater acceptance in the future.

Optical isolators for 2-micron fibre lasers

NASA Astrophysics Data System (ADS)

Stevens, Gary; Legg, Thomas H.; Shardlow, Peter

2015-02-01

We report on the development and testing of optical isolators for use in 2-micron fiber laser systems. A variety of potential Faraday rotator materials were characterised to identify the most suitable materials for use in the 1700-2100nm wavelength range. Isolators based on the three best performing materials were then developed and packaged as fiber-in, fiber-out and fiber-in, beam-out devices. The isolators were then tested in CW, pulsed and ultrafast laser systems. The three different designs produced different performance characteristics, but all designs demonstrated isolation >25dB and insertion losses of <1.2 dB.

Visualization Techniques for Assessing Design Factors That Affect the Interaction between Pharmaceutical Vials and Stoppers.

PubMed

Lam, Philippe; Stern, Al

2010-01-01

We developed several techniques for visualizing the fit between a stopper and a vial in the critical flange area, a location typically hidden from view. Using these tools, it is possible to identify surfaces involved in forming the initial seal immediately after stopper insertion. We present examples illustrating important design elements that can contribute to forming a robust primary package. These techniques can also be used for component screening by facilitating the identification of combinations that do not fit well together so that they can be eliminated early in the selection process.

Solar Mesosphere Explorer

NASA Technical Reports Server (NTRS)

1981-01-01

Five experiments and the instruments packages designed for use in studying reactions between sunlight, ozone, and other chemicals in the atmosphere as well as for determining how ozone concentrations are transported in the mesosphere are described. The spin-stabilized satellite carrying the experiments consists of an observatory module and a spacecraft bus. Powered by a solar array which charges the nickel-cadmium batteries, the satellite is to be inserted into a sun synchronous orbit by a two stage Delta 2310 launch vehicle. The mission objectives, spacecraft configurations, and various subsystems are described as well as the ground support and prelaunch operations.

Fiber-optic coupling based on nonimaging expanded-beam optics.

PubMed

Moslehi, B; Ng, J; Kasimoff, I; Jannson, T

1989-12-01

We have fabricated and experimentally tested low-cost and mass-producible multimode fiber-optic couplers and connectors based on nonimaging beam-expanding optics and Liouville's theorem. Analysis indicates that a pair coupling loss of -0.25 dB can be achieved. Experimentally, we measured insertion losses as low as -0.38 dB. The beam expanders can be mass produced owing to the use of plastic injection-molding fabrication techniques and packaged in standard connector housings. This design is compatible with the fiber geometry and can yield highly stable coupling owing to its high tolerance for misalignments.

Effect of copper chloride on the emissions of PCDD/Fs and PAHs from PVC combustion.

PubMed

Wang, Dongli; Xu, Xiaobai; Zheng, Minghui; Chiu, Chung H

2002-09-01

The influences of temperature, air flow and the amount of copper chloride upon the types and amount of the toxic emissions such as polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) and polycyclic aromatic hydrocarbons (PAHs) during combustion of polyvinyl chloride (PVC) were investigated. The mechanism concerning the effect of temperature and copper chloride on the PCDD/Fs and PAHs formation was discussed. The results shown that without copper chloride, trace amounts of PCDD/Fs and large amounts of PAHs were found in the emissions from the pure PVC combustion under various combustion conditions. The addition of copper chloride enhanced PCDD/Fs formation, but it seems that the formation of PAHs decreased with increasing amount of copper chloride, and greater total amount of PAHs were produced at the higher temperature under our experimental conditions.

[Understanding the advantages and disadvantages of femtosecond laser comprehensive applications in ophthalmology].

PubMed

Xie, Li-xin; Gao, Hua

2013-04-01

The femtosecond (FS) laser is a novel laser technology, and is approved clinical application by FDA in 2000. FS laser initially mainly used in corneal refractive surgery to replace the mechanical microkeratome. Since the accuracy and controllability of the FS laser is very high, it shows superiority in the field of corneal refractive surgery. And with the development of the relative hard and software, FS laser is began to used in other fields of ophthalmology, such as corneal transplants, cataract surgery, as well as assisted diagnosis et al., although still have some limitations, the preliminary clinical results have been shown a very good prospects in the ophthalmology fields. Therefore, we reviewed the alternative applications, challenges and limitations, research direction in the future of FS laser, so that provide a reference and revelations for the peers.

Evaluation of UV-fs-LA-MC-ICP-MS for precise in situ copper isotopic microanalysis of cubanite.

PubMed

Ikehata, Kei; Hirata, Takafumi

2013-01-01

We evaluated the capabilities of an in situ method for measuring copper isotopes of cubanite using UV-fs-LA-MC-ICP-MS. A comparison of the UV-fs laser results with those obtained from the NIR-fs laser system shows that there is obviously an improvement in the precision (<0.10‰, 2SE) when using the UV-fs laser. In both wavelength modes, matrix-matched standards are required for reliable in situ copper isotope analysis of cubanite. This method was applied to determinations for copper isotopes of minute cubanite grains in a skarn ore. Copper isotopic ratios of cubanite grains near a weathered surface of the sample are lower than those of intact cubanite grains within the sample, suggesting that selective leaching of heavier copper isotope in primary minerals occurred during weathering.

Radioprotective Role in Lung of the Flaxseed Lignan Complex Enriched in the Phenolic Secoisolariciresinol Diglucoside (SDG)

PubMed Central

Christofidou-Solomidou, Melpo; Tyagi, Sonia; Pietrofesa, Ralph; Dukes, Floyd; Arguiri, Evguenia; Turowski, Jason; Grieshaber, Philip A.; Solomides, Charalambos C.; Cengel, Keith A.

2012-01-01

While dietary wholegrain Flaxseed (FS) has potent anti-inflammatory, anti-fibrotic and antioxidant properties in murine models of acute and chronic lung injury, the main bioactive ingredient that contributes to these protective effects remains unknown. This study evaluated the lignan complex of FS (FLC) enriched in secoisolariciresinol diglucoside with respect to lung radioprotective and tumor radiosensitizing efficacy using a mouse model of thoracic radiation-induced pneumonopathy. C57/Bl6 mice were fed 0% FS, 10% FS, 10% FLC or 20% FLC for 3 weeks, then irradiated with a single fraction (13.5 Gy) of X-ray radiation treatment (XRT). Mouse survival was monitored for 4 months after irradiation and inflammatory lung parameters were evaluated in bronchoalveolar lavage (BAL) fluid. Gene and protein levels of protective antioxidant and phase II enzymes were evaluated in lung tissue using qPCR and protein levels were verified by immunoblotting. Prolonged administration of the FLC diet was well tolerated and was not associated with any toxicity. Importantly, comparable to the whole grain 10% FS diet, irradiated mice fed 10% and 20% FLC diets displayed improved survival. Improved hemodynamic measurements were also recorded in irradiated mice fed 10% FS or 10% FLC diet compared to irradiated 0% FS fed mice. Flaxseed lignan complex diet also attenuated polymorphonuclear infiltration and overall lung inflammation to levels comparable to those in nonirradiated mice. Flaxseed lignan complex, similarly to FS, up-regulated gene expression as well as protein levels of protective antioxidant enzymes such as heme oxygenase-1 (HO-1) and NAD(P)H quinone oxidoreductase 1 (NQO1). Dietary FLC induced radiosensitizing effects in our murine model of metastatic lung cancer. Importantly, protection of normal tissue does not thwart tumor cell death by radiation treatment. The dietary lignan complex of FS, mainly consisting of the phenolic secoisolariciresinol, is protective against radiation pneumonopathy in vivo while not hindering the tumoricidal effects of radiotherapy. PMID:23106213

Susceptibility to eating disorders among collegiate female student-athletes.

PubMed

McLester, Cherilyn N; Hardin, Robin; Hoppe, Stephanie

2014-01-01

Research has suggested that the prevalence of young women with eating disorders (EDs) is increasing, but determining the exact prevalence of EDs within the female student-athlete (FS-A) population is difficult. Looking at certain traits may help us to identify their level of susceptibility to developing an ED. To determine the susceptibility of FS-As to EDs in relation to self-concept, including self-esteem and body image. Cross-sectional study. Athletic training and health centers at National Collegiate Athletic Association Division I, II, and III institutions via e-mail questionnaire correspondence. A total of 439 FS-As from 17 participating institutions completed the questionnaires. The sample was primarily white (83.1%) and underclass (61.8%). The questionnaire consisted of 4 parts: 3 subscales of the Eating Disorder Inventory-2, the Rosenberg Self-Esteem Scale, the Body Cathexis Scale, and demographic items. A total of 6.8% of FS-As were susceptible to anorexia and 1.8% were susceptible to bulimia. The majority of FS-As (61%) reported normal self-esteem levels, whereas 29.4% had high self-esteem. Overall, 64.5% were satisfied and 23% were very satisfied with their body image. These results are generally positive in that they suggest FS-As have high levels of self-concept and are at low risk to develop EDs. However, these findings do not mean that all concerns should be dismissed. Although more than 90% of the respondents were not susceptible to an ED, there are still FS-As who may be. Athletic departments should evaluate their FS-As' levels of self-concept so that their susceptibility to EDs can be addressed. The emotional aspect of health care should be included in providing holistic care for student-athletes. Athletic trainers often are the primary health care providers for FS-As, so they should be made aware of this concern.

Growth and change in blood haemoglobin concentration among underweight Malawian infants receiving fortified spreads for 12 weeks: a preliminary trial.

PubMed

Kuusipalo, Heli; Maleta, Kenneth; Briend, André; Manary, Mark; Ashorn, Per

2006-10-01

Fortified spreads (FSs) have proven effective in the rehabilitation of severely malnourished children. We examined acceptability, growth and change in blood haemoglobin (Hb) concentration among moderately underweight ambulatory infants given FS. This was a randomised, controlled, parallel-group, investigator-blind clinical trial in rural Malawi. Six- to 17-month-old underweight infants (weight for age < -2), whose weight was greater than 5.5 kg and weight-for-height z score greater than -3 received for 12 weeks at home 1 of 8 food supplementation schemes: nothing, 5, 25, 50, or 75 g/day milk-based FS or 25, 50, or 75 g/day soy-based FS. Outcome measures included change in weight, length and blood Hb concentration. A total of 126 infants started and 125 completed the intervention. All infants accepted the spread well, and no intolerance was recorded. Average weight and length gains were higher among infants receiving daily 25 to 75 g FS than among those receiving only 0 to 5 g FS. Mean Hb concentration remained unchanged among unsupplemented controls but increased by 10 to 17 g/L among infants receiving any FS. All average gains were largest among infants receiving 50 g of FS daily: mean difference (95% confidence interval) in the 12-week gain between infants in 50 g milk-based FS group and the unsupplemented group was 290 g (range, -130 to 700 g), 0.9 cm (range, -0.3 to 2.2 cm), and 17 g/L (range, 0 to 34 g/L) for weight, length and blood Hb concentration, respectively. In soy- vs milk-based FS groups, average outcomes were comparable. Supplementation with 25 to 75 g/day of highly fortified spread is feasible and may promote growth and alleviate anaemia among moderately malnourished infants. Further trials should test this hypothesis.

Transient elastography using Fibroscan is the most reliable noninvasive method for the diagnosis of advanced fibrosis and cirrhosis in alcoholic liver disease.

PubMed

Fernandez, Michael; Trépo, Eric; Degré, Delphine; Gustot, Thierry; Verset, Laurine; Demetter, Pieter; Devière, Jacques; Adler, Michael; Moreno, Christophe

2015-09-01

Fibroscan (FS) is a reliable noninvasive method for the diagnosis of advanced fibrosis and cirrhosis in chronic liver disease. However, there is no clear consensus with respect to the best FS cut-off values for use in alcoholic liver disease (ALD). The aims of this study were as follows: (a) to compare the performance of FS and different biochemical markers in ALD patients; (b) to assess the best FS cut-off values for the prediction of fibrosis stage in our ALD population; and (c) to assess the influence of aspartate aminotransferase (AST) values on FS. This retrospective study included 135 consecutive and compensated ALD patients who underwent liver biopsy between November 2006 and March 2012 at Erasme Hospital. FS, Fibrotest, FIB-4, aspartate aminotransferase to platelet ratio index (APRI), and Forns' scores were tested in all patients. The diagnostic accuracy of FS was 0.89 (95% confidence interval: 0.83-0.95) for the diagnosis of advanced fibrosis and 0.93 (95% confidence interval 0.90-0.97) for the diagnosis of cirrhosis. FS performed better than Fibrotest (0.81 and 0.88), APRI (0.65 and 0.75), Forns' (0.64 and 0.78), and FIB-4 (0.70 and 0.73). The optimal cut-off values of liver stiffness (LS) for predicting METAVIR fibrosis stage F≥3 and F4 disease were 10.3 and 18.0 kPa, respectively. AST showed a significant positive correlation with LS (r=0.24, P=0.001). However, exclusion of patients with AST more than 50 IU/l only lowered the LS cut-off for the diagnosis of F4 (14 vs. 18.0 kPa). FS is currently the most reliable noninvasive method for the diagnosis of advanced liver fibrosis and cirrhosis in ALD.

Does help-seeking alter the risk for incident psychopathology in adolescents and young adults with and without fearful spells or panic attacks? Findings from a 10-year prospective-longitudinal community study.

PubMed

Asselmann, Eva; Wittchen, Hans-Ulrich; Lieb, Roselind; Höfler, Michael; Beesdo-Baum, Katja

2014-12-01

Although fearful spells (FS) and panic attacks (PA) increase the risk for various mental disorders, few studies have examined whether help-seeking in those with FS/PA attenuates the risk for incident psychopathology. A community sample of adolescents and young adults (N=2978, aged 14-24 at baseline) was followed up in up to 3 assessment waves over 10 years. FS, PA, psychopathology, and help-seeking were assessed using the DSM-IV/M-CIDI. Logistic regressions with interaction terms (adjusted for sex and age) were used to test interactions between FS/PA and help-seeking at baseline on predicting incident psychopathology at follow-up. Cases with panic disorder (PD) at baseline were excluded from all analyses. FS/PA at baseline predicted the onset of any disorder, any anxiety disorder, PD, agoraphobia, generalized anxiety disorder, social phobia, and depression at follow-up (Odds Ratios, OR 1.62-5.80). FS/PA and help-seeking at baseline interacted on predicting incident PD (OR=0.09) and depression (OR=0.22) at follow-up in a way that FS/PA only predicted the respective disorders in individuals not seeking help at baseline. In those with FS/PA, a higher number of panic symptoms interacted with help-seeking on predicting incident PD (OR=0.63) in a way that a higher number of panic symptoms only increased the risk for PD in those without help-seeking at baseline. Help-seeking at baseline was not restricted to panic-specific interventions, but included treatment due to other psychological problems as well. Findings suggest that early help-seeking might modify psychopathology trajectories and prevent incident disorders in high-risk individuals with FS/PA. Copyright © 2014 Elsevier B.V. All rights reserved.

SeaWiFS technical report series. Volume 23: SeaWiFS prelaunch radiometric calibration and spectral characterization

NASA Technical Reports Server (NTRS)

Barnes, Robert A.; Holmes, Alan W.; Barnes, William L.; Esaias, Wayne E.; Mcclain, Charles R.; Svitek, Tomas; Hooker, Stanford B.; Firestone, Elaine R.; Acker, James G.

1994-01-01

Based on the operating characteristics of the Sea-viewing Wide Field-of-view Sensor (SeaWiFS), calibration equations have been developed that allow conversion of the counts from the radiometer into Earth-existing radiances. These radiances are the geophysical properties the instrument has been designed to measure. SeaWiFS uses bilinear gains to allow high sensitivity measurements of ocean-leaving radiances and low sensitivity measurements of radiances from clouds, which are much brighter than the ocean. The calculation of these bilinear gains is central to the calibration equations. Several other factors within these equations are also included. Among these are the spectral responses of the eight SeaWiFS bands. A band's spectral response includes the ability of the band to isolate a portion of the electromagnetic spectrum and the amount of light that lies outside of that region. The latter is termed out-of-band response. In the calibration procedure, some of the counts from the instrument are produced by radiance in the out-of-band region. The number of those counts for each band is a function of the spectral shape of the source. For the SeaWiFS calibration equations, the out-of-band responses are converted from those for the laboratory source into those for a source with the spectral shape of solar flux. The solar flux, unlike the laboratory calibration, approximates the spectral shape of the Earth-existing radiance from the oceans. This conversion modifies the results from the laboratory radiometric calibration by 1-4 percent, depending on the band. These and other factors in the SeaWiFS calibration equations are presented here, both for users of the SeaWiFS data set and for researchers making ground-based radiance measurements in support of Sea WiFS.

Radioprotective role in lung of the flaxseed lignan complex enriched in the phenolic secoisolariciresinol diglucoside (SDG).

PubMed

Christofidou-Solomidou, Melpo; Tyagi, Sonia; Pietrofesa, Ralph; Dukes, Floyd; Arguiri, Evguenia; Turowski, Jason; Grieshaber, Philip A; Solomides, Charalambos C; Cengel, Keith A

2012-12-01

While dietary wholegrain Flaxseed (FS) has potent anti-inflammatory, anti-fibrotic and antioxidant properties in murine models of acute and chronic lung injury, the main bioactive ingredient that contributes to these protective effects remains unknown. This study evaluated the lignan complex of FS (FLC) enriched in secoisolariciresinol diglucoside with respect to lung radioprotective and tumor radiosensitizing efficacy using a mouse model of thoracic radiation-induced pneumonopathy. C57/Bl6 mice were fed 0% FS, 10% FS, 10% FLC or 20% FLC for 3 weeks, then irradiated with a single fraction (13.5 Gy) of X-ray radiation treatment (XRT). Mouse survival was monitored for 4 months after irradiation and inflammatory lung parameters were evaluated in bronchoalveolar lavage (BAL) fluid. Gene and protein levels of protective antioxidant and phase II enzymes were evaluated in lung tissue using qPCR and protein levels were verified by immunoblotting. Prolonged administration of the FLC diet was well tolerated and was not associated with any toxicity. Importantly, comparable to the whole grain 10% FS diet, irradiated mice fed 10% and 20% FLC diets displayed improved survival. Improved hemodynamic measurements were also recorded in irradiated mice fed 10% FS or 10% FLC diet compared to irradiated 0% FS fed mice. Flaxseed lignan complex diet also attenuated polymorphonuclear infiltration and overall lung inflammation to levels comparable to those in nonirradiated mice. Flaxseed lignan complex, similarly to FS, up-regulated gene expression as well as protein levels of protective antioxidant enzymes such as heme oxygenase-1 (HO-1) and NAD(P)H quinone oxidoreductase 1 (NQO1). Dietary FLC induced radiosensitizing effects in our murine model of metastatic lung cancer. Importantly, protection of normal tissue does not thwart tumor cell death by radiation treatment. The dietary lignan complex of FS, mainly consisting of the phenolic secoisolariciresinol, is protective against radiation pneumonopathy in vivo while not hindering the tumoricidal effects of radiotherapy.

The Efficacy of the Quorum Sensing Inhibitor FS8 and Tigecycline in Preventing Prosthesis Biofilm in an Animal Model of Staphylococcal Infection

PubMed Central

Simonetti, Oriana; Cirioni, Oscar; Mocchegiani, Federico; Cacciatore, Ivana; Silvestri, Carmela; Baldassarre, Leonardo; Orlando, Fiorenza; Castelli, Pamela; Provinciali, Mauro; Vivarelli, Marco; Fornasari, Erika; Giacometti, Andrea; Offidani, Annamaria

2013-01-01

We investigated the efficacy of tigecycline and FS8, alone or combined, in preventing prosthesis biofilm in a rat model of staphylococcal vascular graft infection. Graft infections were established in the back subcutaneous tissue of adult male Wistar rats by implantation of Dacron prostheses followed by topical inoculation with 2 × 107 colony-forming units of Staphylococcus aureus, strain Smith diffuse. The study included a control group, a contaminated group that did not receive any antibiotic prophylaxis, and three contaminated groups that received: (i) intraperitoneal tigecycline, (ii) FS8-soaked graft, and (iii) tigecycline plus FS8-soaked graft, respectively. Each group included 15 animals. The infection burden was evaluated by using sonication and quantitative agar culture. Moreover, an in vitro binding-study was performed to quantify the how much FS8 was coated to the surface of the prosthesis. Tigecycline, combined with FS8, against the adherent bacteria showed MICs (2.00 mg/L) and MBCs (4.00 mg/L) four-fold lower with respect to tigecycline alone in in vitro studies. The rat groups treated with tigecycline showed the lowest bacterial numbers (4.4 × 104 ± 1.2 × 104 CFU/mL). The FS8-treated group showed a good activity and significant differences compared to control group with bacterial numbers of 6.8 × 104 ± 2.0 × 104 CFU/mL. A stronger inhibition of bacterial growth was observed in rats treated with a combined FS8 and tigecycline therapy than in those that were singly treated with bacterial numbers of 101 CFU/mL graft. In conclusion, the ability to affect biofilm formation as well, its property to be an antibiotic enhancer suggests FS8 as alternative or additional agent to use in conjunction with conventional antimicrobial for prevention of staphylococcal biofilm related infection. PMID:23965956

Particle-bound polychlorinated dibenzo- p-dioxins and dibenzofurans in the atmosphere of Guangzhou, China

NASA Astrophysics Data System (ADS)

Yu, Liping; Mai, Bixian; Meng, Xiangzhou; Bi, Xinhui; Sheng, Guoying; Fu, Jiamo; Peng, Ping'an

A short-term sampling scheme was devised to determine the levels of particle-bound polychlorinated dibenzo- p-dioxins and dibenzofurans (PCDD/Fs) in Guangzhou atmosphere and to evaluate the impact of PCDD/Fs on the lives of the inhabitants in Guangzhou. Samples were collected from four different districts of Guangzhou City, and the results indicated that industrial activities had tremendous influence on the levels of atmospheric PCDD/Fs in these districts. The mean PCDD/Fs concentrations (mean I-TEQ values) for Huadu, Liwan, Tianhe and Huangpu districts were 3815 fg m -3 (104.6 fg I-TEQ m -3), 12 777 fg m -3 (430.5 fg I-TEQ m -3), 6963 fg m -3 (163.7 fg I-TEQ m -3) and 10 953 fg m -3 (769.3 fg I-TEQ m -3), respectively, which were higher than the concentration ranges for other cities in the world. The mean concentrations of particulate organic carbon (OC) and elemental carbon (EC) were 17.61±0.94 and 3.17±0.21 μg m -3 for Huadu district, 44.18±2.29 and 13.32±0.75 μg m -3 for Liwan district, 33.53±1.72 and 9.89±0.56 μg m -3 for Tianhe district, and 29.52±1.53 and 8.87±0.53 μg m -3 for Huangpu district, respectively. The relationship between PCDD/Fs concentrations and OC and EC concentrations demonstrated that EC could be a better predictor for the concentration of PCDD/Fs. Detailed source analysis indicated that the PCDD/Fs in Guangzhou were derived from small diffuse combustion sources, e.g., traffic sources, domestic burning of fossil fuels, non-industrial combustion sources and industrial combustion sources. Results of daily intake of PCDD/Fs by inhaling air suggested that the inhalation exposure of PCDD/Fs by the inhabitants in Liwan district is relatively high.

Subsampling effects in neuronal avalanche distributions recorded in vivo

PubMed Central

Priesemann, Viola; Munk, Matthias HJ; Wibral, Michael

2009-01-01

Background Many systems in nature are characterized by complex behaviour where large cascades of events, or avalanches, unpredictably alternate with periods of little activity. Snow avalanches are an example. Often the size distribution f(s) of a system's avalanches follows a power law, and the branching parameter sigma, the average number of events triggered by a single preceding event, is unity. A power law for f(s), and sigma = 1, are hallmark features of self-organized critical (SOC) systems, and both have been found for neuronal activity in vitro. Therefore, and since SOC systems and neuronal activity both show large variability, long-term stability and memory capabilities, SOC has been proposed to govern neuronal dynamics in vivo. Testing this hypothesis is difficult because neuronal activity is spatially or temporally subsampled, while theories of SOC systems assume full sampling. To close this gap, we investigated how subsampling affects f(s) and sigma by imposing subsampling on three different SOC models. We then compared f(s) and sigma of the subsampled models with those of multielectrode local field potential (LFP) activity recorded in three macaque monkeys performing a short term memory task. Results Neither the LFP nor the subsampled SOC models showed a power law for f(s). Both, f(s) and sigma, depended sensitively on the subsampling geometry and the dynamics of the model. Only one of the SOC models, the Abelian Sandpile Model, exhibited f(s) and sigma similar to those calculated from LFP activity. Conclusion Since subsampling can prevent the observation of the characteristic power law and sigma in SOC systems, misclassifications of critical systems as sub- or supercritical are possible. Nevertheless, the system specific scaling of f(s) and sigma under subsampling conditions may prove useful to select physiologically motivated models of brain function. Models that better reproduce f(s) and sigma calculated from the physiological recordings may be selected over alternatives. PMID:19400967

Reduction of atmospheric polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) during the 2008 Beijing Olympic games.

PubMed

Li, Yingming; Wang, Thanh; Wang, Pu; Ding, Lei; Li, Xiaomin; Wang, Yawei; Zhang, Qinghua; Li, An; Jiang, Guibin

2011-04-15

A total of 120 air samples were collected at three urban and one rural location in Beijing, China in the summers of 2007-2010, and before, during, and after the Beijing 2008 Olympic Games (BOG), in order to assess the effectiveness of long-term and short-term emission-control measures in reducing polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the atmosphere. During the BOG (August, 2008), the PCDD/Fs concentrations decreased to an average value of 1150 fg m(-3) (63 fg I-TEQ m(-3)), which was reduced by approximately 70% from the average in 2007 and by 29% from that in July 2008, before the Olympic event began. Although 2009-2010 levels of PCDD/Fs were significantly higher than 2008, the overall temporal trend was decreasing for summer months during the sampling campaign period. The apparent half-lives of atmospheric PCDD/Fs were estimated to be 3.2-5.8 years by statistically regressing the logarithm PCDD/Fs concentrations versus the number of years passed since 2006. The air concentrations of total suspended particulates (TSP) during the BOG ranged between 135 and 183 μg m(-3), showing a 52% reduction from 2007 and 26% decrease from those prior to the Olympic event. No significant relationships were found between meteorological parameters (temperature, humidity, and wind speed) and PCDD/Fs or TSP during the BOG, whereas the PCDD/Fs concentrations were significantly dependent on the air quality (p < 0.05, positive against TSP and negative against visibility). This work is one of few temporal trend studies of atmospheric PCDD/Fs in mainland China, and provides unique insight into the effects of large-scale control measures in improving air quality and reducing one of the most ubiquitous and toxic organic pollutants in the environment.

Calibration and diagnostic accuracy of simple flotation, McMaster and FLOTAC for parasite egg counts in sheep.

PubMed

Rinaldi, L; Coles, G C; Maurelli, M P; Musella, V; Cringoli, G

2011-05-11

The present study was aimed at carrying out a calibration and a comparison of diagnostic accuracy of three faecal egg counts (FEC) techniques, simple flotation, McMaster and FLOTAC, in order to find the best flotation solution (FS) for Dicrocoelium dendriticum, Moniezia expansa and gastrointestinal (GI) strongyle eggs, and to evaluate the influence of faecal preservation methods combined with FS on egg counts. Simple flotation failed to give satisfactory results with any samples. Overall, FLOTAC resulted in similar or higher eggs per gram of faeces (EPG) and lower coefficient of variation (CV) than McMaster. The "gold standard" for D. dendriticum was obtained with FLOTAC when using FS7 (EPG=219, CV=3.9%) and FS8 (EPG=226, CV=5.2%) on fresh faeces. The "gold standard" for M. expansa was obtained with FLOTAC, using FS3 (EPG=122, CV=4.1%) on fresh faeces. The "gold standard" for GI strongyles was obtained with FLOTAC when using FS5 (EPG=320, CV=4%) and FS2 (EPG=298, CV=5%). As regard to faecal preservation methods, formalin 5% and 10% or freezing showed performance similar to fresh faeces for eggs of D. dendriticum and M. expansa. However, these methods of preservation were not as successful with GI strongyle eggs. Vacuum packing with storage at +4°C permitted storage of GI strongyle eggs for up to 21 days prior to counting. Where accurate egg counts are required in ovine samples the optimum method of counting is the use of FLOTAC. In addition, we suggest the use of two solutions that are easy and cheap to purchase and prepare, saturated sodium chloride (FS2) for nematoda and cestoda eggs and saturated zinc sulphate (FS7) for trematoda eggs and nematoda larvae. Copyright © 2010 Elsevier B.V. All rights reserved.

A Prospective, Randomized, Multicenter Clinical Trial on the Safety and Efficacy of a Ready-to-Use Fibrin Sealant as an Adjunct to Hemostasis during Vascular Surgery.

PubMed

Chetter, Ian; Stansby, Gerard; Sarralde, José Aurelio; Riambau, Vicente; Giménez-Gaibar, Antonio; MacKenzie, Kent; Acín, Francisco; Navarro-Puerto, Jordi

2017-11-01

Anastomotic or "stitch hole" bleeding is common during vascular surgery with synthetic material such as Dacron or polytetrafluoroethylene. Hemostatic adjuncts such as fibrin sealant (FS) may reduce blood loss and operating time in such circumstances. We evaluated the safety and the hemostatic effectiveness of a ready-to-use human plasma-derived FS in vascular surgery. Patients with mild/moderate suture line bleeding during elective, open, vascular surgery using synthetic grafts or patches were studied. In an initial Exploratory Study, all patients were treated with FS Grifols, and in a subsequent Primary Study were randomized in a 2:1 ratio to FS Grifols or manual compression (MC). The primary efficacy end point was time to hemostasis (TTH), assessed at defined intervals from the start of treatment application, during a 10-min observational period. Safety end points (in Exploratory + Primary Studies) included adverse events (AEs), vital signs, physical assessments, common clinical laboratory tests (coagulation, complete blood count, serum clinical chemistry parameters, microscopic urinalysis), viral markers, and immunogenicity. In the Primary Study, the proportion of patients who achieved hemostasis at the 3-min time point was higher in the FS Grifols group (46.4%, n = 51/110) than in the MC group (26.3%, n = 15/57) (P < 0.05). The benefit was maintained at successive time intervals: 69 FS Grifols patients (62.7%) and 18 MC patients (31.6%) at 4 min; 82 FS Grifols patients (74.5%) and 28 MC patients (49.1%) at 5 min. The differences between the groups persisted for TTH ≤ 7 min and TTH ≤ 10 min. Treatment failure was reported for 13 FS Grifols patients (11.8%) and 16 MC patients (28.1%). TTH was shorter after FS Grifols application than after MC application. Differences were statistically significant in favor of FS Grifols for each TTH category and for the overall comparison (P < 0.001) as well as for each TTH category (cumulative) and for treatment failure (P = 0.016). Overall, AE experience and types of AEs reported were those expected in this patient population and were similar between the 2 treatment groups. The most frequently reported AEs were procedural pain (59.9% and 69.2% of patients in the FS Grifols [n = 72 + 111] and MC [n = 57] groups, respectively) and nausea (23.5% and 19.2% of patients, respectively). FS Grifols was efficacious and safe as an adjunct to anastomotic hemostasis in patients undergoing arterial surgery using prosthetic material with mild to moderate bleeding. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Manipulating femtosecond spin-orbit torques with laser pulse sequences to control magnetic memory states and ringing

NASA Astrophysics Data System (ADS)

Lingos, P. C.; Wang, J.; Perakis, I. E.

2015-05-01

Femtosecond (fs) coherent control of collective order parameters is important for nonequilibrium phase dynamics in correlated materials. Here, we propose such control of ferromagnetic order based on using nonadiabatic optical manipulation of electron-hole (e -h ) photoexcitations to create fs carrier-spin pulses with controllable direction and time profile. These spin pulses are generated due to the time-reversal symmetry breaking arising from nonperturbative spin-orbit and magnetic exchange couplings of coherent photocarriers. By tuning the nonthermal populations of exchange-split, spin-orbit-coupled semiconductor band states, we can excite fs spin-orbit torques that control complex magnetization pathways between multiple magnetic memory states. We calculate the laser-induced fs magnetic anisotropy in the time domain by using density matrix equations of motion rather than the quasiequilibrium free energy. By comparing to pump-probe experiments, we identify a "sudden" out-of-plane magnetization canting displaying fs magnetic hysteresis, which agrees with switchings measured by the static Hall magnetoresistivity. This fs transverse spin-canting switches direction with magnetic state and laser frequency, which distinguishes it from the longitudinal nonlinear optical and demagnetization effects. We propose that sequences of clockwise or counterclockwise fs spin-orbit torques, photoexcited by shaping two-color laser-pulse sequences analogous to multidimensional nuclear magnetic resonance (NMR) spectroscopy, can be used to timely suppress or enhance magnetic ringing and switching rotation in magnetic memories.

Role of black carbon in the sorption of polychlorinated dibenzo-p-dioxins and dibenzofurans at the Diamond Alkali superfund site, Newark Bay, New Jersey.

PubMed

Lambert, Matthew K; Friedman, Carey; Luey, Pamela; Lohmann, Rainer

2011-05-15

The sorption of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) to organic carbon (OC) and black carbon (BC) was measured in two sediment cores taken near the Diamond Alkali superfund site (DA) in the Passaic River and Newark Bay, New Jersey (U.S.A.). An OC partitioning model and a BC-inclusive, Freundlich distribution model were used to interpret measurements of freely dissolved PCDD/Fs using passive samplers in sediment incubations, together with measured sedimentary concentrations of OC, BC, and PCDD/Fs. Samples were also analyzed for polycyclic aromatic hydrocarbons (PAHs) as controls on the two distribution models. The OC partitioning model underpredicted the distribution of PAHs and PCDD/Fs by 10-100-fold. The Freundlich model predicted the distribution of PAHs at the DA to within a factor of 2-3 of observations. Black carbon-water partition coefficients (K(iBC)) for PCDD/Fs, derived from literature results of both field and laboratory studies differed up to 1000-fold from values derived from this study. Contrary to expectations, PCDDs displayed stronger sorption than either PCDFs or PAHs relative to their subcooled liquid aqueous solubilities. Even though the presence of BC in the sediments reduced the overall bioavailability of PCDD/Fs by >90%, the sediments at 2 m depth continue to display the highest pore water activities of PCDD/Fs.

Impact of Children’s Feeding/Swallowing Problems: Validation of a New Caregiver Instrument

PubMed Central

Okelo, Sande O.; Wright, Jennifer M.; Collaco, Joseph M.; McGrath-Morrow, Sharon A.; Eakin, Michelle N.

2015-01-01

The impact of caring for children with deglutition disorders is poorly understood and tools to measure the unique concerns of these caregivers are lacking. The aims of this investigation were to develop and validate The Feeding/Swallowing Impact Survey (FS-IS) as an instrument designed to measure and improve understanding of caregiver issues. Demographic, economic, and dysphagic data were provided by the primary caregivers of 164 children (median age: 14 months, male: 78, female: 86) presenting for initial outpatient feeding/swallowing evaluations. Caregivers completed the PEDS-QL™ Family Impact Module (PEDS-QL™ FIM) and the FS-IS. A principal component analysis was conducted on the FS-IS to identify appropriate subscales. Concurrent validity was assessed by examining correlations between the FS-IS and PEDS-QL™ FIM. Caring for children with feeding/swallowing problems adversely impacted the Health-Related Quality of Life (HRQoL) of their caregivers. The FS-IS had a strong 3-factor solution to indicate 3 subscales: Daily Activities, Worry, and Feeding Difficulties. All three sub-scales and total score of the FS-IS correlated with PEDS-QL™ FIM. The FS-IS was validated as an instrument that may help clinicians detect specific factors that influence caregiver HRQoL, identify caregivers who might benefit from additional support, and ultimately improve the care of their children with feeding/swallowing disorders. PMID:25159316

Mathematical model to interpret localized reflectance spectra measured in the presence of a strong fluorescence marker

NASA Astrophysics Data System (ADS)

Bravo, Jaime J.; Davis, Scott C.; Roberts, David W.; Paulsen, Keith D.; Kanick, Stephen C.

2016-06-01

Quantification of multiple fluorescence markers during neurosurgery has the potential to provide complementary contrast mechanisms between normal and malignant tissues, and one potential combination involves fluorescein sodium (FS) and aminolevulinic acid-induced protoporphyrin IX (PpIX). We focus on the interpretation of reflectance spectra containing contributions from elastically scattered (reflected) photons as well as fluorescence emissions from a strong fluorophore (i.e., FS). A model-based approach to extract μa and μs‧ in the presence of FS emission is validated in optical phantoms constructed with Intralipid (1% to 2% lipid) and whole blood (1% to 3% volume fraction), over a wide range of FS concentrations (0 to 1000 μg/ml). The results show that modeling reflectance as a combination of elastically scattered light and attenuation-corrected FS-based emission yielded more accurate tissue parameter estimates when compared with a nonmodified reflectance model, with reduced maximum errors for blood volume (22% versus 90%), microvascular saturation (21% versus 100%), and μs‧ (13% versus 207%). Additionally, quantitative PpIX fluorescence sampled in the same phantom as FS showed significant differences depending on the reflectance model used to estimate optical properties (i.e., maximum error 29% versus 86%). These data represent a first step toward using quantitative optical spectroscopy to guide surgeries through simultaneous assessment of FS and PpIX.

SeaWiFS: Mississippi Sediments in the Gulf of Mexico

NASA Technical Reports Server (NTRS)

2002-01-01

This SeaWiFS image collected on January 15, 2002 clearly shows the discharge from the Mississippi River into the Gulf of Mexico. In summertime, much of the sea floor under the brownish colored water goes without dissolved oxygen. Credit: Provided by the SeaWiFS Project, NASA/Goddard Space Flight Center, and ORBIMAGE

SeaWiFS: Asian Dust over the Western United States

NASA Technical Reports Server (NTRS)

2002-01-01

This SeaWiFS image, captured on April 15, 2001, shows dust from the Asian continent over the United States. Atmospheric aerosoles are much easier to see over water than over land, so you can best see the haze offshore. Credit: Provided by the SeaWiFS Project, NASA/Goddard Space Flight Center, and ORBIMAGE

Opposed Jet Burner Extinction Limits: Simple Mixed Hydrocarbon Scramjet Fuels vs Air

NASA Technical Reports Server (NTRS)

Pellett, Gerald L.; Vaden, Sarah N.; Wilson, Lloyd G.

2007-01-01

Opposed Jet Burner tools have been used extensively by the authors to measure Flame Strength (FS) of laminar non-premixed H2 air and simple hydrocarbon (HC) air counterflow diffusion flames at 1-atm. FS represents a strain-induced extinction limit based on air jet velocity. This paper follows AIAA-2006-5223, and provides new HC air FSs for global testing of chemical kinetics, and for characterizing idealized flameholding potentials during early scramjet-like combustion. Previous FS data included six HCs, pure and N2-diluted; and three HC-diluted H2 fuels, where FS decayed very nonlinearly as HC was added to H2, due to H-atom scavenging. This study presents FSs on mixtures of (candidate surrogate) HCs, some with very high FS ethylene. Included are four binary gaseous systems at 300 K, and a hot ternary system at approx. 600 K. The binaries are methane + ethylene, ethane + ethylene, methane + ethane, and methane + propylene. The first three also form two ternary systems. The hot ternary includes both 10.8 and 21.3 mole % vaporized n-heptane and full ranges of methane + ethylene. Normalized FS data provide accurate means of (1) validating, globally, chemical kinetics for extinction of non-premixed flames, and (2) estimating (scaling by HC) the loss of incipient flameholding in scramjet combustors. The n-heptane is part of a proposed baseline simulant (10 mole % with 30% methane + 60% ethylene) that mimics the ignition of endothermically cracked JP-7 like kerosene fuel, as suggested by Colket and Spadaccini in 2001 in their shock tube Scramjet Fuels Autoignition Study. Presently, we use FS to gauge idealized flameholding, and define HC surrogates. First, FS was characterized for hot nheptane + methane + ethylene; then a hot 36 mole % methane + 64% ethylene surrogate was defined that mimics FS of the baseline simulant system. A similar hot ethane + ethylene surrogate can also be defined, but it has lower vapor pressure at 300 K, and thus exhibits reduced gaseous capacity. The new FS results refine our earlier idealized reactivity scale that shows wide ranging (50 x) diameter-normalized FSs for various HCs. These range from JP-10 and methane to H2 air, which produces an exceptionally strong flame that agrees within approx. 1% of recent 2-D numerically simulations. Finally, we continue advocating the FS approach as more direct and fundamental, for assessing idealized scramjet flameholding potentials, than measurements of unstrained laminar burning velocity or blowout in a Perfectly Stirred Reactor.

Lung morphometry using hyperpolarized 129 Xe multi-b diffusion MRI with compressed sensing in healthy subjects and patients with COPD.

PubMed

Zhang, Huiting; Xie, Junshuai; Xiao, Sa; Zhao, Xiuchao; Zhang, Ming; Shi, Lei; Wang, Ke; Wu, Guangyao; Sun, Xianping; Ye, Chaohui; Zhou, Xin

2018-05-04

To demonstrate the feasibility of compressed sensing (CS) to accelerate the acquisition of hyperpolarized (HP) 129 Xe multi-b diffusion MRI for quantitative assessments of lung microstructural morphometry. Six healthy subjects and six chronic obstructive pulmonary disease (COPD) subjects underwent HP 129 Xe multi-b diffusion MRI (b = 0, 10, 20, 30, and 40 s/cm 2 ). First, a fully sampled (FS) acquisition of HP 129 Xe multi-b diffusion MRI was conducted in one healthy subject. The acquired FS dataset was retrospectively undersampled in the phase encoding direction, and an optimal twofold undersampled pattern was then obtained by minimizing mean absolute error (MAE) between retrospective CS (rCS) and FS MR images. Next, the FS and CS acquisitions during separate breath holds were performed on five healthy subjects (including the above one). Additionally, the FS and CS synchronous acquisitions during a single breath hold were performed on the sixth healthy subject and one COPD subject. However, only CS acquisitions were conducted in the rest of the five COPD subjects. Finally, all the acquired FS, rCS and CS MR images were used to obtain morphometric parameters, including acinar duct radius (R), acinar lumen radius (r), alveolar sleeve depth (h), mean linear intercept (L m ), and surface-to-volume ratio (SVR). The Wilcoxon signed-rank test and the Bland-Altman plot were employed to assess the fidelity of the CS reconstruction. Moreover, the t-test was used to demonstrate the effectiveness of the multi-b diffusion MRI with CS in clinical applications. The retrospective results demonstrated that there was no statistically significant difference between rCS and FS measurements using the Wilcoxon signed-rank test (P > 0.05). Good agreement between measurements obtained with the CS and FS acquisitions during separate breath holds was demonstrated in Bland-Altman plots of slice differences. Specifically, the mean biases of the R, r, h, L m , and SVR between the CS and FS acquisitions were 1.0%, 2.6%, -0.03%, 1.5%, and -5.5%, respectively. Good agreement between measurements with the CS and FS acquisitions was also observed during the single breath-hold experiments. Furthermore, there were significant differences between the morphometric parameters for the healthy and COPD subjects (P < 0.05). Our study has shown that HP 129 Xe multi-b diffusion MRI with CS could be beneficial in lung microstructural assessments by acquiring less data while maintaining the consistent results with the FS acquisitions. © 2018 American Association of Physicists in Medicine.

Accumulation and elimination of polychlorinated dibenzo-p-dioxins and dibenzofurans in mule ducks.

PubMed

Wu, Ting-Wei; Lee, Jai-Wei; Liu, Hsueh-Yen; Lin, Wei-Hsiao; Chu, Chun-Yen; Lin, Sheng-Lun; Chang-Chien, Guo Ping; Yu, Chi

2014-11-01

In Taiwan, a food safety crisis involving a presence of high concentrations of dioxin residues in duck eggs occurred in 2004. The dioxin content in duck meat sampled from supermarkets was also reported to be substantially higher than in products from other farm animals. Despite increased awareness of the potential for contamination and exposure to dioxins, the accumulation and elimination of dioxins in ducks have not been well characterized. In the present study, mule ducks were fed capsules containing polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) for 14 days and the trial was continued for another 28 days without PCDD/Fs supplementation. Ducks were sacrificed on the 14th, 28th, and 42nd days from the beginning of administration and samples of abdominal fat, breast, and liver tissue were obtained. The concentrations of PCDD/Fs were analyzed in the samples to investigate their distribution and elimination in various duck tissues. The bioaccumulation of PCDD/Fs in ducks was found to be tissue-dependent. In the abdominal fat, the bioconcentration factor was negatively correlated with the degree of chlorination. Conversely, more chlorinated PCDD/Fs (hexa- or hepta-congeners) were associated with higher bioconcentration in the liver and breast tissue. In terms of the efficiency of PCDD/Fs elimination, the liver was found to be the fastest, followed by the breast and the abdominal fat. The clearance rate positively correlated with the degree of chlorination, as determined by comparing the apparent elimination rate constant (k) of PCDD/Fs in various tissues. Overall, lower k values observed in this study imply that mule ducks have a reduced clearance of PCDD/Fs in comparison with layer and broiler chickens. Copyright © 2014 Elsevier B.V. All rights reserved.

Vanishing Parotid Tumors on MR Imaging

PubMed Central

Matsusue, Eiji; Fujihara, Yoshio; Matsuda, Eiken; Tokuyasu, Yusuke; Nakamoto, Shu; Nakamura, Kazuhiko; Ogawa, Toshihide

2018-01-01

Background Of all parotid gland tumors, only oncocytoma has been reported to appear isointense to the parotid gland, namely vanishing, on fat-saturated T2 and T1 postcontrast gadolinium-enhanced magnetic resonance imaging (MRI). The purpose of this study was to evaluate vanishing of parotid tumors on conventional MRI with and/or without postcontrast gadolinium-enhancement and on diffusion weighted imaging (DWI). Methods In 8 of 51 patients, ten parotid gland tumors had homogeneously enhanced lesions and were retrospectively analysed. Comparisons of signal intensity between those parotid tumors and parotid glands and evaluations of vanishing were performed on T1-weighted imaging (T1WI), T2-weighted imaging (T2WI), fat-suppressed T2WI (FS-T2WI), postcontrast gadolinium-enhanced T1WI (CE-T1WI) and fat-suppressed CE-T1WI (FS-CE-T1WI), DWI as well as apparent diffusion coefficient (ADC). Results Ten parotid gland tumors consisted of five Warthin tumors, two pleomorphic adenomas, two parotid carcinomas (small cell carcinoma and adenoid cystic carcinoma) and one oncocytoma. All tumors showed hypointensity on T1WI and hyperintensity on DWI. Nine of ten tumors showed vanishing on the other MR sequences. All Warthin tumors showed vanishing on FS-T2WI, FS-CE-T1WI and the ADC map. One oncocytoma showed vanishing on FS-T2WI and the ADC map and hyperintensity on FS-CE-T1WI. All pleomorphic adenomas showed vanishing on T2WI and CE-T1WI. One adenoid cystic carcinoma showed vanishing only on CE-T1WI. Conclusion Vanishing of parotid tumors can be observed not only on FS-T2WI and FS-CE-T1WI but also on T2WI, CE-T1WI and ADC mapping. PMID:29599620

IDEAL 3D spoiled gradient echo of the articular cartilage of the knee on 3.0 T MRI: a comparison with conventional 3.0 T fast spin-echo T2 fat saturation image.

PubMed

Han, Chul Hee; Park, Hee Jin; Lee, So Yeon; Chung, Eun Chul; Choi, Seon Hyeong; Yun, Ji Sup; Rho, Myung Ho

2015-12-01

Many two-dimensional (2D) morphologic cartilage imaging sequences have disadvantages such as long acquisition time, inadequate spatial resolution, suboptimal tissue contrast, and image degradation secondary to artifacts. IDEAL imaging can overcome these disadvantages. To compare sound-to-noise ratio (SNR), contrast-to-noise ratio (CNR), and quality of two different methods of imaging that include IDEAL 3D SPGR and 3.0-T FSE T2 fat saturation (FS) imaging and to evaluate the utility of IDEAL 3D SPGR for knee joint imaging. SNR and CNR of the patellar and femoral cartilages were measured and calculated. Two radiologists performed subjective scoring of all images for three measures: general image quality, FS, and cartilage evaluation. SNR and CNR values were compared by paired Student's t-tests. Mean SNRs of patellar and femoral cartilages were 90% and 66% higher, respectively, for IDEAL 3D SPGR. CNRs of patellar cartilages and joint fluids were 2.4 times higher for FSE T2 FS, and CNR between the femoral cartilage and joint fluid was 2.2 times higher for FSE T2 FS. General image quality and FS were superior using FSE T2 FS compared to those of IDEAL 3D SPGR imaging according to both readers, while cartilage evaluation was superior using IDEAL 3D SPGR. Additionally, cartilage injuries were more prominent in IDEAL 3D SPGR than in FSE T2FS according to both readers. IDEAL 3D SPGR images show excellent visualization of patellar and femoral cartilages in 3.0 T and can compensate for the weaknesses of FSE T2 FS in the evaluation of cartilage injuries. © The Foundation Acta Radiologica 2014.

Correlation of fetal oxygen saturation to fetal heart rate patterns. Evaluation of fetal pulse oximetry with two different oxisensors.

PubMed

Luttkus, A K; Friedmann, W; Homm-Luttkus, C; Dudenhausen, J W

1998-03-01

The purpose of this study was the correlation of fetal oxygen saturation values to various fetal heart rate patterns, as well as to oxygen saturation values obtained by fetal blood analysis. These objectives need to be evaluated from the perspective that two generations of fetal oxisensors have been used. Two different oxisensor systems (FS10: 660+890 nm and FS14: 735+890 nm) and a blinded pulse oximeter (type N400, Nellcor Puritan Bennett) were utilized to monitor 112 fetuses. All data, including oxygen saturation, fetal heart rate patterns, signal and contact quality were stored on a personal computer and evaluated after delivery. The following median fetal oxygen saturation values were obtained: during reassuring fetal heart rate sequences 54% with the oxisensor FS10 and 48% with the newer FS14 oxisensor, during intervals of variable decelerations 43% with the FS10 oxisensor and 40% with the FS14 oxisensor. These differences between values obtained during normal and abnormal fetal heart rate patterns are significant. Due to non-reassuring fetal heart rate patterns 81 fetal blood analyses were performed. The values of pulse oximetry were 9% higher (6% for the FS14) than those of spectrophotometry. Correlation of both methods was r=0.66 (0.74 for the FS14). In combination with fetal heart rate monitoring, fetal pulse oximetry promises a better differentiation between low and high risk heart rate patterns. Oxygen saturation values from intermittent fetal blood sampling reassure the clinician concerning the accuracy of this new method of intrapartum fetal surveillance and underline the increased quality of the new generation of oxisensor using light of a wavelength of 735 and 890 nm.

A new method to estimate left ventricular circumferential midwall systolic function by standard echocardiography: Concordance between models and validation by speckle tracking.

PubMed

Ballo, Piercarlo; Nistri, Stefano; Bocelli, Arianna; Mele, Donato; Dini, Frank L; Galderisi, Maurizio; Zuppiroli, Alfredo; Mondillo, Sergio

2016-01-15

Assessment of left ventricular circumferential (LVcirc) systolic function by standard echocardiography can be performed by estimating midwall fractional shortening (mFS) and stress-corrected mFS (ScmFS). Their determination is based on spherical or cylindrical LV geometric models, which often yield discrepant values. We developed a new model based on a more realistic truncated ellipsoid (TE) LV shape, and explored the concordance between models among hypertensive patients. We also compared the relationships of different mFS and ScmFS estimates with indexes of LVcirc systolic strain. In 364 hypertensive subjects, mFS was determined using the spherical (mFSspher), cylindrical (mFScyl), and TE model (mFSTE). Corresponding values of ScmFSspher, ScmFScyl, and ScmFSTE were obtained. Global circumferential strain (GCS) and systolic strain rate (GCSR) were also measured by speckle tracking. The three models showed poor concordance for the estimation of mFS, with average differences ranging between 11% and 30% and wide limits of agreement. Similar results were found for ScmFS, where reclassification rates for the identification of abnormal LVcirc systolic function ranged between 18% and 29%. When tested against strain indexes, mFSTE and ScmFSTE showed the best correlations (R=0.81 and R=0.51, p<0.0001 for both) with GCS and GCSR. Multivariable analysis confirmed that mFSTE and ScmFSTE showed the strongest independent associations with LVcirc strain measures. Substantial discrepancies in LVcirc midwall systolic indexes exist between different models, supporting the need of model-specific normative data. The use of the TE model might provide indexes that show the best associations with established strain measures of LVcirc systolic function. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Spontaneous bacteriocin resistance in Listeria monocytogenes as a susceptibility screen for identifying different mechanisms of resistance and modes of action by bacteriocins of lactic acid bacteria.

PubMed

Macwana, Sunita; Muriana, Peter M

2012-01-01

A practical system was devised for grouping bacteriocins of lactic acid bacteria (LAB) based on mode of action as determined by changes in inhibitory activity to spontaneously-acquired bacteriocin resistance (Bac(R)). Wild type Listeria monocytogenes 39-2 was sensitive to five bacteriocins produced by 3 genera of LAB: pediocin PA-1 and pediocin Bac3 (Pediococcus), lacticin FS97 and lacticin FS56 (Lactococcus), and curvaticin FS47 (Lactobacillus). A spontaneous Bac(R) derivative of L. monocytogenes 39-2 obtained by selective recovery against lacticin FS56 provided complete resistance to the bacteriocin made by Lactococcus lactis FS56. The lacticin FS56-resistant strain of L. monocyotgenes 39-2 was also cross-resistant to curvaticin FS47 and pediocin PA-1, but not to lacticin FS97 or pediocin Bac3. The same pattern of cross-resistance was also observed with Bac(R) isolates obtained with L. monocytogenes Scott A-2. A spontaneous mutation that renders a strain cross-resistant to different bacteriocins indicates that they share a common mechanism of resistance due to similar modes of action of the bacteriocins. Spontaneous resistance was acquired to other bacteriocins (in aggregate) by following the same procedure against which the Bac(R) strain was still sensitive. In subsequent challenge assays, mixtures of bacteriocins of different modes of action provided greater inhibition than mixtures of bacteriocins of the same mode of action (as determined by our screening method). This study identifies a methodical approach to classify bacteriocins into functional groups based on mechanism of resistance (i.e., mode of action) that could be used for identifying the best mixture of bacteriocins for use as biopreservatives. Copyright © 2011 Elsevier B.V. All rights reserved.

Monitoring the long term stability of the IRS-P6 AWiFS sensor using the Sonoran and RVPN sites

NASA Astrophysics Data System (ADS)

Chander, Gyanesh; Sampath, Aparajithan; Angal, Amit; Choi, Taeyoung; Xiong, Xiaoxiong

2010-10-01

This paper focuses on radiometric and geometric assessment of the Indian Remote Sensing (IRS-P6) Advanced Wide Field Sensor (AWiFS) sensor using the Sonoran desert and Railroad Valley Playa, Nevada (RVPN) ground sites. Imageto- Image (I2I) accuracy and relative band-to-band (B2B) accuracy were measured. I2I accuracy of the AWiFS imagery was assessed by measuring the imagery against Landsat Global Land Survey (GLS) 2000. The AWiFS images were typically registered to within one pixel to the GLS 2000 mosaic images. The B2B process used the same concepts as the I2I, except instead of a reference image and a search image; the individual bands of a multispectral image are tested against each other. The B2B results showed that all the AWiFS multispectral bands are registered to sub-pixel accuracy. Using the limited amount of scenes available over these ground sites, the reflective bands of AWiFS sensor indicate a long-term drift in the top-of-atmosphere (TOA) reflectance. Because of the limited availability of AWiFS scenes over these ground sites, a comprehensive evaluation of the radiometric stability using these sites is not possible. In order to overcome this limitation, a cross-comparison between AWiFS and Landsat 7 (L7) Enhanced Thematic Mapper Plus (ETM+) was performed using image statistics based on large common areas observed by the sensors within 30 minutes. Regression curves and coefficients of determination for the TOA trends from these sensors were generated to quantify the uncertainty in these relationships and to provide an assessment of the calibration differences between these sensors.

Polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in e-waste plastic in Nigeria.

PubMed

Sindiku, O; Babayemi, J O; Tysklind, M; Osibanjo, O; Weber, R; Watson, A; Schlummer, M; Lundstedt, S

2015-10-01

Plastics from cathode ray tube (CRT) casings were sampled in Nigeria and analysed for their polybrominated dibenzo-p-dioxin and dibenzofuran (PBDD/F) content. PBDD/Fs, consisting mainly of PBDFs, were detected in BFR containing plastic with a median (mean) concentration of 18,000 ng/g (41,000 ng/g). The PBDD/Fs levels were highest in samples containing PBDEs, but the levels of PBDFs were two orders of magnitude higher than the levels reported in the technical PBDE mixtures and where frequently exceeding 1000 μg/g of PBDE content. These higher levels are likely to arise from additional transformation of PBDEs during production, use, recycling, or storage, but the processes responsible were not identified in this study. PBDD/Fs in CRT casings containing1,2-bistribromophenoxyethane (TBPE) were dominated by tetrabrominated dibenzo-p-dioxin (TBDDs) with concentrations around 10 μg/g of the TBPE content. The PBDD/Fs in CRT casings containing tetrabromobisphenol A (TBBPA) were found at concentrations around 0.1 μg/g of TBBPA levels. Casings treated with TBPE or TBBPA often contained PBDEs (and PBDF) as impurities-probably originating from recycled e-waste plastics. It was estimated that the 237,000 t of CRT casings stockpiled in Nigeria contain between 2 and 8 t of PBDD/Fs. The total PBDD/F contamination in polymers arising from total historic PBDE production/use is estimated in the order of 1000 t. TEQ values of CRT samples frequently exceeded the Basel Convention's provisional low POPs content of 15 ng TEQ/g. Due to the significant risks to health associated with PBDD/Fs, more detailed studies on the exposure routes from PBDD/Fs in stockpiles are needed.

Removal of PCDD/Fs, PCP and mercury from sediments: Thermal oxidation versus pyrolysis.

PubMed

Chang, Moo-Been; Hsu, Yen-Chen; Chang, Shu-Hao

2018-05-07

A continuous pilot-scale system (CPS) equipped with effective air pollution control devices (APCDs) is used for remediating the sediments contaminated with PCDD/Fs, PCP and Hg simultaneously. The removal efficiencies of these three pollutants in sediments collected from seawater pond and river, respectively, are evaluated via thermal treatment processes. PAHs and CBz formed during thermal oxidation and pyrolysis are also analyzed for better understanding the behaviors of chlorinated organic compounds. Experimental results indicate that low-molecular-weight PAHs are closely related to the formation of CBz, PCDD/Fs, and CPs, while low chlorinated PCDD/Fs and CBz are predominant in flue gas with thermal oxidation. However, the PM concentration is higher in thermal oxidation than pyrolysis due to the higher air flow rate of thermal oxidation. It may bring more particles out of the furnace and have a greater potential to form PCDD/Fs within APCDs. Besides, the high air flow also dilutes the Hg vapor in flue gas and would require more energy to condense and collect Hg with the quench tower. Furthermore, for removal of total amount of PCDD/Fs, pyrolysis is better than thermal oxidation. Thus, pyrolysis is more suitable for remediating the contaminated sediment. The removal efficiencies of PCDD/Fs, PCP and Hg in sediments achieved with pyrolysis increase with increasing operating temperature and retention time in CPS. Overall, the residual concentrations of PCDD/Fs and PCP in river sediment are higher than that in seawater-pond sediment since significant formation of tar is observed due to higher organic matter content in river sediment. Copyright © 2018 Elsevier Ltd. All rights reserved.

Hepatoprotective effects of ethanol extracts from Folium Syringae against acetaminophen-induced hepatotoxicity in vitro and in vivo.

PubMed

Shi, Chen-Xi; Lin, Yue-Xia; Liu, Fang-Ping; Chang, Yi-Cong; Li, Rui; Li, Chang-Wen; Li, Ying; He, Jing-Shan; Ma, Xin; Li, Zhi

2017-10-01

The leaves of Folium Syringae (FS) have been long used as a traditional Chinese folk medicine for their anti-inflammatory effect, utilized as an antibacterial and antiviral treatment. The purpose of this study was to investigate the potential hepatoprotective effects of FS on acetaminophen-induced hepatic injury in primary hepatocytes and mice. Hepatocytes obtained by the inverse perfusion method were divided randomly into five groups. Prior to acetaminophen exposure, 3 different doses of FS ethanol extracts were given to hepatocytes and mice, respectively. Thereafter, transaminases, glutathione S-transferase A1 (GSTA1) and some hepatic indices were determined. FS ethanol extracts (200 μg/mL) pretreatment prevented all of the alterations, returning their levels to nearly those levels observed in the control group in vitro. Treatment with FS ethanol extracts (200 mg/kg) significantly reduced the toxicity induced by acetaminophen in vivo, which manifested as a decrease in transaminases, and the hepatoprotective effects of FS were similar to Silymarin (positive group). GSTA1 represented the same change trend as transaminases and hepatic indices, and at a dose of 100 μg/mL FS ethanol extracts in vitro and 100 mg/kg in vivo, GSTA1 content changed significantly (p < 0.01), but transaminases were insignificant (p > 0.05). The results of our investigation suggested that FS ethanol extracts possess significant protective effects against hepatotoxicity induced by acetaminophen both in vitro and in vivo. In addition, GSTA1 could be used as an indicator assessing the extents of hepatic injury, which is more sensitive than transaminases. Copyright © 2017. Published by Elsevier Taiwan LLC.