Sample records for fully open position

  1. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alderfer, R.R.; Futa, P.W.

    This patent describes a fuel system for an engine having a filter through which fuel from a pump passes to a regulator in response to an operator input. The regulator controls the flow of fuel presented to a combustion chamber in the engine, the regulator having a feedback apparatus to provide an operator with a signal indicative of the fuel supplied to the combustion chamber. It comprises: bypass means having a housing with a chamber therein, the chamber having an entrance port connected to the pump and an exit port connected to the regulator; piston means located in the chambermore » for separating the entrance port from the exit port, the piston having a face with a projection extending therefrom; stop means located in the chamber; resilient means located is the chamber for urging the piston means toward the stop means to prevent the flow of fuel from the pump through the housing to the regulator; and indicator means having a body retained in the housing with a first end which extends through the housing into the from a full-open position at which the closed circuit is fully opened to a full-closed position at which the closed circuit is fully blocked; ratio detecting means which detects the speed reduction ratio to find if the speed reduction ratio becomes substantially 1; and valve position detecting means which detects position of the direct clutch valve to find if the direct clutch valve is moved to a slight-open position at which the closed circuit is slightly opened.« less

  2. Electromechanically Actuated Valve for Controlling Flow Rate

    NASA Technical Reports Server (NTRS)

    Patterson, Paul

    2007-01-01

    A proposed valve for controlling the rate of flow of a fluid would include an electric-motor-driven ball-screw mechanism for adjusting the seating element of the valve to any position between fully closed and fully open. The motor would be of a type that can be electronically controlled to rotate to a specified angular position and to rotate at a specified rate, and the ball screw would enable accurate linear positioning of the seating element as a function of angular position of the motor. Hence, the proposed valve would enable fine electronic control of the rate of flow and the rate of change of flow. The uniqueness of this valve lies in a high degree of integration of the actuation mechanism with the flow-control components into a single, relatively compact unit. A notable feature of this integration is that in addition to being a major part of the actuation mechanism, the ball screw would also be a flow-control component: the ball screw would be hollow so as to contain part of the main flow passage, and one end of the ball screw would be the main seating valve element. The relationships among the components of the valve are best understood by reference to the figure, which presents meridional cross sections of the valve in the fully closed and fully open positions. The motor would be supported by a bracket bolted to the valve body. By means of gears or pulleys and a timing belt, motor drive would be transmitted to a sleeve that would rotate on bearings in the valve body. A ball nut inside the sleeve would be made to rotate with the sleeve by use of a key. The ball screw would pass through and engage the ball nut. A key would prevent rotation of the ball screw in the valve body while allowing the ball screw to translate axially when driven by the ball nut. The outer surface of the ball screw would be threaded only in a mid-length region: the end regions of the outer surface of the ball screw would be polished so that they could act as dynamic sealing surfaces. The inlet end (the right end as depicted in the figure) of the ball screw would be the main seating valve element: in the fully closed position, it would be pressed against the valve seat, as depicted in the upper part of the figure. A retainer would hold the valve seat in an inlet fitting. In addition, the retainer would be contoured to obtain a specified flow rate as a function of axial position of the ball screw. In the fully closed position, little force would be needed to press the ball screw against the seat because the push bore area upon which the upstream pressure would act would be small. The motor would position and hold the ball screw against the seat, providing the force necessary for sealing. To open the valve to a particular position, the motor would be commanded to rotate to a particular angular position (equivalently, a particular number of revolutions) at a particular rate of rotation within its torque limitations. Once the valve was open, fluid would flow through the inlet fitting and the chamber in the inlet housing, past the seat and its retainer, along the hollow core of the ball screw, and through the outlet housing and outlet fitting. The net force generated from fluid pressure in the open position would be small because the pressure exposed to the push bore areas at the inlet and outlet are nearly equal and the forces generated would be in opposing directions.

  3. Estimating the surface area of birds: using the homing pigeon (Columba livia) as a model.

    PubMed

    Perez, Cristina R; Moye, John K; Pritsos, Chris A

    2014-05-08

    Estimation of the surface area of the avian body is valuable for thermoregulation and metabolism studies as well as for assessing exposure to oil and other surface-active organic pollutants from a spill. The use of frozen carcasses for surface area estimations prevents the ability to modify the posture of the bird. The surface area of six live homing pigeons in the fully extended flight position was estimated using a noninvasive method. An equation was derived to estimate the total surface area of a pigeon based on its body weight. A pigeon's surface area in the fully extended flight position is approximately 4 times larger than the surface area of a pigeon in the perching position. The surface area of a bird is dependent on its physical position, and, therefore, the fully extended flight position exhibits the maximum area of a bird and should be considered the true surface area of a bird. © 2014. Published by The Company of Biologists Ltd | Biology Open.

  4. The Galileo high gain antenna deployment anomaly

    NASA Technical Reports Server (NTRS)

    Johnson, Michael R.

    1994-01-01

    On April 11, 1991, the Galileo spacecraft executed a sequence that would open the spacecraft's High Gain Antenna. The Antenna's launch restraint had been released just after deployment sequence, the antenna, which opens like an umbrella, never reached the fully deployed position. The analyses and tests that followed allowed a conclusive determination of the likely failure mechanisms and pointed to some strategies to use for recovery of the high gain antenna.

  5. Engine including hydraulically actuated valvetrain and method of valve overlap control

    DOEpatents

    Cowgill, Joel [White Lake, MI

    2012-05-08

    An exhaust valve control method may include displacing an exhaust valve in communication with the combustion chamber of an engine to an open position using a hydraulic exhaust valve actuation system and returning the exhaust valve to a closed position using the hydraulic exhaust valve actuation assembly. During closing, the exhaust valve may be displaced for a first duration from the open position to an intermediate closing position at a first velocity by operating the hydraulic exhaust valve actuation assembly in a first mode. The exhaust valve may be displaced for a second duration greater than the first duration from the intermediate closing position to a fully closed position at a second velocity at least eighty percent less than the first velocity by operating the hydraulic exhaust valve actuation assembly in a second mode.

  6. Closed-loop mechanical ventilation for lung injury: a novel physiological-feedback mode following the principles of the open lung concept.

    PubMed

    Schwaiberger, David; Pickerodt, Philipp A; Pomprapa, Anake; Tjarks, Onno; Kork, Felix; Boemke, Willehad; Francis, Roland C E; Leonhardt, Steffen; Lachmann, Burkhard

    2018-06-01

    Adherence to low tidal volume (V T ) ventilation and selected positive end-expiratory pressures are low during mechanical ventilation for treatment of the acute respiratory distress syndrome. Using a pig model of severe lung injury, we tested the feasibility and physiological responses to a novel fully closed-loop mechanical ventilation algorithm based on the "open lung" concept. Lung injury was induced by surfactant washout in pigs (n = 8). Animals were ventilated following the principles of the "open lung approach" (OLA) using a fully closed-loop physiological feedback algorithm for mechanical ventilation. Standard gas exchange, respiratory- and hemodynamic parameters were measured. Electrical impedance tomography was used to quantify regional ventilation distribution during mechanical ventilation. Automatized mechanical ventilation provided strict adherence to low V T -ventilation for 6 h in severely lung injured pigs. Using the "open lung" approach, tidal volume delivery required low lung distending pressures, increased recruitment and ventilation of dorsal lung regions and improved arterial blood oxygenation. Physiological feedback closed-loop mechanical ventilation according to the principles of the open lung concept is feasible and provides low tidal volume ventilation without human intervention. Of importance, the "open lung approach"-ventilation improved gas exchange and reduced lung driving pressures by opening atelectasis and shifting of ventilation to dorsal lung regions.

  7. Solid state lift for micrometering in a fuel injector

    DOEpatents

    Milam, David M.; Carroll, Thomas S.; Lee, Chien-Chang; Miller, Charles R.

    2002-01-01

    A fuel injector performs main fuel injection by raising fuel pressure in a nozzle chamber to lift a check valve member to a fully open position, and performs preinjection or microinjection by operating a solid state motor to lift the check valve member a much smaller distance.

  8. The joint effect of personality traits and perceived stress on pedestrian behavior in a Chinese sample

    PubMed Central

    Zheng, Tingting; Ge, Yan; Sun, Xianghong; Zhang, Kan

    2017-01-01

    While improper pedestrian behavior has become an important factor related to road traffic fatalities, especially in developing countries, the effects of personality traits and/or stress on pedestrian behavior have been rarely reported. The current study explored the joint effects of five personality traits (i.e., extraversion, openness, neuroticism, normlessness and altruism) and global perceived stress (measured with the Perceived Stress Scale-10) on pedestrian behavior (measured with the Pedestrian Behavior Scale) in 311 Chinese individuals. Results showed that altruism, neuroticism and openness significantly affected different pedestrian behavior dimensions, while global perceived stress also significantly and positively predicted positive behavior. Moreover, the effect of neuroticism on positive behavior was fully mediated by stress. Some explanations and implications are provided in the discussion section. PMID:29190750

  9. Valve

    DOEpatents

    Cho, Nakwon

    1980-01-01

    A positive acting valve suitable for operation in a corrosive environment is provided. The valve includes a hollow valve body defining an open-ended bore for receiving two, axially aligned, spaced-apart, cylindrical inserts. One insert, designated the seat insert, terminates inside the valve body in an annular face which lies within plane normal to the axis of the two inserts. An elastomeric O-ring seal is disposed in a groove extending about the annular face. The other insert, designated the wedge insert, terminates inside the valve body in at least two surfaces oppositely inclined with respect to each other and with respect to a plane normal to the axis of the two inserts. An elongated reciprocable gate, movable between the two inserts along a path normal to the axis of the two inserts, has a first flat face portion disposed adjacent and parallel to the annular face of the seat insert. The gate has a second face portion opposite to the first face portion provided with at least two oppositely inclined surfaces for mating with respective inclined surfaces of the wedge insert. An opening is provided through the gate which registers with a flow passage through the two inserts when the valve is open. Interaction of the respective inclined surfaces of the gate and wedge insert act to force the first flat face portion of the gate against the O-ring seal in the seat insert at the limits of gate displacement where it reaches its respective fully open and fully closed positions.

  10. Solution for Direct Solar Impingement Problem on Landsat-7 ETM+ Cooler Door During Cooler Outgas in Flight

    NASA Technical Reports Server (NTRS)

    Choi, Michael K.

    1999-01-01

    There was a thermal anomaly of the Landsat-7 Enhanced Thematic Mapper Plus (ETM+) radiative cooler cold stage during the cooler outgas phase in flight. With the cooler door in the outgas position and the outgas heaters enabled, the cold stage temperature increased to a maximum of 323 K when the spacecraft was in the sunlight, which was warmer than the 316.3 K upper set point of the outgas heater controller on the cold stage. Also, the outgas heater cycled off when the cold stage was warming up to 323 K. A corrective action was taken before the attitude of the spacecraft was changed during the first week in flight. One orbit before the attitude was changed, the outgas heaters were disabled to cool off the cold stage. The cold stage temperature increase was strongly dependent on the spacecraft roll and yaw. It provided evidence that direct solar radiation entered the gap between the cooler door and cooler shroud. There was a concern that the direct solar radiation could cause polymerization of hydrocarbons, which could contaminate the cooler and lead to a thermal short. After outgas with the cooler door in the outgas position for seven days, the cooler door was changed to the fully open position. With the cooler door fully open, the maximum cold stage temperature was 316.3 K when the spacecraft was in the sunlight, and the duty cycle of the outgas heater in the eclipse was the same as that in the sunlight. It provided more evidence that direct solar radiation had entered the gap between the cooler door and cooler shroud. Cooler outgas continued for seven more days, with the cooler door fully open. The corrective actions had prevented overheating of the cold stage and cold focal plane array (CFPA), which could damage these two components. They also minimized the risk of contamination on the cold stage, which could lead to a thermal short.

  11. Frequency of open windows in motor vehicles under varying temperature conditions: a videotape survey in Central North Carolina during 2001.

    PubMed

    Long, Tom; Johnson, Ted; Ollison, Will

    2004-07-01

    Air pollution exposures in the motor vehicle cabin are significantly affected by air exchange rate, a function of vehicle speed, window position, vent status, fan speed, and air conditioning use. A pilot study conducted in Houston, Texas, during September 2000 demonstrated that useful information concerning the position of windows, sunroofs, and convertible tops as a function of temperature and vehicle speed could be obtained through the use of video recorders. To obtain similar data representing a wide range of temperature and traffic conditions, a follow-up study was conducted in and around Chapel Hill, North Carolina at five sites representing a central business district, an arterial road, a low-income commercial district, an interstate highway, and a rural road. Each site permitted an elevated view of vehicles as they proceeded through a turn, thereby exposing all windows to the stationary camcorder. A total of 32 videotaping sessions were conducted between February and October 2001, in which temperature varied from 41 degrees F to 93 degrees F and average vehicle speed varied from 21 to 77 mph. The resulting video tapes were processed to create a vehicle-specific database that included site location, date, time, vehicle type, vehicle color, vehicle age, window configuration, number of windows in each of three position categories (fully open, partially open, and closed), meteorological factors, and vehicle speed. Of the 4715 vehicles included in the database, 1905 (40.4%) were labeled as "open," indicating a window, sunroof, or convertible top was fully or partially open. Stepwise linear regression analyses indicated that "open" window status was affected by wind speed, relative humidity, vehicle speed, cloud cover, apparent temperature, day of week, time of day, vehicle type, vehicle age, vehicle color, number of windows, sunroofs, location, and air quality season. Open windows tended to occur less frequently when relative humidity was high, apparent temperature (a parameter incorporating wind chill and heat index) was below 50 degrees F, or the vehicle was relatively new. Although the effects of the identified parameters were relatively weak, they are statistically significant and should be considered by researchers attempting to model vehicle air exchange rates.

  12. Biologist Postbaccalaureate Fellow | Center for Cancer Research

    Cancer.gov

    A fully funded post bac position is available to study tumor microenvironment at the National Cancer Institute on the NIH main campus in Bethesda, MD.  Specifically, this opening is for an ongoing project examining the role of tissue architecture and mechanotransduction in the establishment of metastatic lesions, using zebrafish as a model system.  

  13. Biologist Postdoctoral Fellow | Center for Cancer Research

    Cancer.gov

    A fully funded postdoctoral position is available at the National Cancer Institute on the NIH main campus in Bethesda, MD.  Specifically, this opening is for an ongoing project examining the role of tissue architecture and mechanotransduction in the establishment of metastatic lesions, using zebrafish as a model system.  The NIH will provide funding and benefits, though

  14. Biologist postbaccalaureate fellow | Center for Cancer Research

    Cancer.gov

    A fully funded post bac position is available to study tumor microenvironment at the National Cancer Institute on the NIH main campus in Bethesda, MD.  Specifically, this opening is for an ongoing project examining the role of tissue architecture and mechanotransduction in the establishment of metastatic lesions, using zebrafish as a model system.  

  15. 40 CFR 86.884-7 - Dynamometer operation cycle for smoke emission tests.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... provide the speed and load necessary to comply with the heavy-duty “curb idle” definition per § 86.084-2..., and held in, the fully open position. The inertia of the engine and the dynamometer, or alternately a... mode, motoring assist may be used to offset excessive dynamometer inertia load when necessary. No...

  16. 40 CFR 86.884-7 - Dynamometer operation cycle for smoke emission tests.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... be set to provide the speed and load necessary to comply with the heavy-duty “curb idle” definition..., and held in, the fully open position. The inertia of the engine and the dynamometer, or alternately a... mode, motoring assist may be used to offset excessive dynamometer inertia load when necessary. No...

  17. 40 CFR 86.884-7 - Dynamometer operation cycle for smoke emission tests.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... be set to provide the speed and load necessary to comply with the heavy-duty “curb idle” definition..., and held in, the fully open position. The inertia of the engine and the dynamometer, or alternately a... mode, motoring assist may be used to offset excessive dynamometer inertia load when necessary. No...

  18. 40 CFR 86.884-7 - Dynamometer operation cycle for smoke emission tests.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... be set to provide the speed and load necessary to comply with the heavy-duty “curb idle” definition..., and held in, the fully open position. The inertia of the engine and the dynamometer, or alternately a... mode, motoring assist may be used to offset excessive dynamometer inertia load when necessary. No...

  19. 33 CFR 401.52 - Limit of approach to a bridge.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Limit of approach to a bridge... approach to a bridge. (a) No vessel shall pass the limit of approach sign at any movable bridge until the bridge is in a fully open position and the signal light shows green. (b) No vessel shall pass the limit...

  20. 33 CFR 401.52 - Limit of approach to a bridge.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Limit of approach to a bridge... approach to a bridge. (a) No vessel shall pass the limit of approach sign at any movable bridge until the bridge is in a fully open position and the signal light shows green. (b) No vessel shall pass the limit...

  1. Effect of interior door position on room-to-room differences in residential pollutant concentrations after short-term releases

    NASA Astrophysics Data System (ADS)

    Ferro, Andrea R.; Klepeis, Neil E.; Ott, Wayne R.; Nazaroff, William W.; Hildemann, Lynn M.; Switzer, Paul

    Residential interior door positions influence the pollutant concentrations that result from short-term indoor sources, such as cigarettes, candles, and incense. To elucidate this influence, we reviewed past studies and conducted new experiments in three residences: a single-story 714 m 3 ranch-style house, a 510 m 3 two-story split-level house, and a 200 m 3 two-story house. During the experiments, we released sulfur hexafluoride or carbon monoxide tracer gas over short periods (≤30 min) and measured concentrations in the source room and at least one other (receptor) room for various interior door opening positions. We found that closing a door between rooms effectively prevented transport of air pollutants, reducing the average concentration in the receptor room relative to the source room by 57-100% over exposure periods of 1-8 h. When intervening doors were partially or fully open, the reduction in average concentrations ranged from 3% to 99%, varying as a function of door opening width and the distance between source and receptor rooms.

  2. Determining the frequency of open windows in motor vehicles: a pilot study using a video camera in Houston, Texas during high temperature conditions.

    PubMed

    Long, Tom; Johnson, Ted; Ollison, Will

    2002-05-01

    Researchers have developed a variety of computer-based models to estimate population exposure to air pollution. These models typically estimate exposures by simulating the movement of specific population groups through defined microenvironments. Exposures in the motor vehicle microenvironment are significantly affected by air exchange rate, which in turn is affected by vehicle speed, window position, vent status, and air conditioning use. A pilot study was conducted in Houston, Texas, during September 2000 for a specific set of weather, vehicle speed, and road type conditions to determine whether useful information on the position of windows, sunroofs, and convertible tops could be obtained through the use of video cameras. Monitoring was conducted at three sites (two arterial roads and one interstate highway) on the perimeter of Harris County located in or near areas not subject to mandated Inspection and Maintenance programs. Each site permitted an elevated view of vehicles as they proceeded through a turn, thereby exposing all windows to the stationary video camera. Five videotaping sessions were conducted over a two-day period in which the Heat Index (HI)-a function of temperature and humidity-varied from 80 to 101 degrees F and vehicle speed varied from 30 to 74 mph. The resulting videotapes were processed to create a master database listing vehicle-specific data for site location, date, time, vehicle type (e.g., minivan), color, window configuration (e.g., four windows and sunroof), number of windows in each of three position categories (fully open, partially open, and closed), HI, and speed. Of the 758 vehicles included in the database, 140 (18.5 percent) were labeled as "open," indicating a window, sunroof, or convertible top was fully or partially open. The results of a series of stepwise linear regression analyses indicated that the probability of a vehicle in the master database being "open" was weakly affected by time of day, vehicle type, vehicle color, vehicle speed, and HI. In particular, open windows occurred more frequently when vehicle speed was less than 50 mph during periods when HI exceeded 99.9 degrees F and the vehicle was a minivan or passenger van. Overall, the pilot study demonstrated that data on factors affecting vehicle window position could be acquired through a relatively simple experimental protocol using a single video camera. Limitations of the study requiring further research include the inability to determine the status of the vehicle air conditioning system; lack of a wide range of weather, vehicle speed, and road type conditions; and the need to exclude some vehicles from statistical analyses due to ambiguous window positions.

  3. Biologist postdoctoral fellow | Center for Cancer Research

    Cancer.gov

    A fully funded postdoctoral position is available at the National Cancer Institute on the NIH main campus in Bethesda, MD.  Specifically, this opening is for an ongoing project examining the role of tissue architecture and mechanotransduction in the establishment of metastatic lesions, using zebrafish as a model system.  The NIH will provide funding and benefits, though extramural fellowship applications will be strongly encouraged and supported.

  4. An evaluation of some strategies for vibration control of flexible rotors

    NASA Technical Reports Server (NTRS)

    Burrows, C. R.

    1992-01-01

    There is evidence that the reliability of magnetic bearings has achieved an acceptable level in applications when high cost can be tolerated. This acceptability would be enhanced if the inherent capability of magnetic bearings as active control elements were fully used. The technological and commercial promise of magnetic bearings will be fulfilled only if attention is focussed on the control problems associated with their use. The open loop adaptive control algorithm provides an efficient method of controlling the vibration of rotors without the need of a prior knowledge of parameter values. It overcomes the disadvantages normally associated with open loop control while avoiding the problem of instability associated with closed loop control algorithms. The algorithm is conceptually satisfying because it uses the capability of magnetic bearings as fully active vibration control elements rather than limiting them to act as adjustable stiffness and damping elements, as is the case when they are used with local position and velocity feedback.

  5. Urbanization, regime type and durability, and environmental degradation in Ghana.

    PubMed

    Adams, Samuel; Adom, Philip Kofi; Klobodu, Edem Kwame Mensah

    2016-12-01

    This study examines the effect of urbanization, income, trade openness, and institutional quality (i.e., regime type and durability) on environmental degradation in Ghana over the period 1965-2011. Using the bounds test approach to cointegration and the Fully Modified Phillip-Hansen (FMPH) technique, the findings show that urbanization, income, trade openness, and institutional quality have long-run cointegration with environmental degradation. Further, the results show that income, trade openness, and institutional quality are negatively associated with environmental degradation. This suggests that income, trade openness, and institutional quality enhance environmental performance. Urbanization, however, is positively related to environmental degradation. Additionally, long-run estimates conditioned on institutional quality reveal that the extent to which trade openness and urbanization enhance environmental performance is largely due to the presence of quality institutions (or democratic institutions). Finally, controlling for structural breaks, we find that trade openness, urbanization, and regime type (i.e., democracy) improve environmental performance significantly after the 1970s except for income.

  6. Fuel injection system and method of operating the same for an engine

    DOEpatents

    Topinka, Jennifer Ann [Niskayuna, NY; DeLancey, James Peter [Corinth, NY; Primus, Roy James [Niskayuna, NY; Pintgen, Florian Peter [Niskayuna, NY

    2011-02-15

    A fuel injector is coupled to an engine. The fuel injector includes an injection opening configured to vary in cross-section between a open state and a fully closed state. The fuel injector is configured to provide a plurality of discrete commanded fuel injections into an engine cylinder by modulating the size of the injection opening without completely closing the opening to the fully closed state.

  7. From service quality in organisations to self-determination at home.

    PubMed

    Martínez-Tur, V; Moliner, C; Peñarroja, V; Gracia, E; Peiró, J M

    2015-10-01

    In our proposed model, family members' perceptions of service quality in organisations improve communication about self-determination. In turn, family perceptions of communication openness have a positive relationship with self-determination attitudes of family members. Finally, these attitudes predict self-determination behaviours of individuals with intellectual disability, as reported by family members. We tested this model with a sample of 625 family members (196 using 'day care services' and 429 using 'occupational services'). Multi-sample structural equation modelling (SEM) supported the model. Communication and attitudes fully mediated the link from service quality to self-determination behaviours. Improving family members' perceptions of service quality and opening channels of communication between professionals and family members are useful strategies to facilitate parents' positive attitudes and increase the frequency of self-determination behaviours at home. © 2015 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

  8. Stem thrust prediction model for W-K-M double wedge parallel expanding gate valves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Eldiwany, B.; Alvarez, P.D.; Wolfe, K.

    1996-12-01

    An analytical model for determining the required valve stem thrust during opening and closing strokes of W-K-M parallel expanding gate valves was developed as part of the EPRI Motor-Operated Valve Performance Prediction Methodology (EPRI MOV PPM) Program. The model was validated against measured stem thrust data obtained from in-situ testing of three W-K-M valves. Model predictions show favorable, bounding agreement with the measured data for valves with Stellite 6 hardfacing on the disks and seat rings for water flow in the preferred flow direction (gate downstream). The maximum required thrust to open and to close the valve (excluding wedging andmore » unwedging forces) occurs at a slightly open position and not at the fully closed position. In the nonpreferred flow direction, the model shows that premature wedging can occur during {Delta}P closure strokes even when the coefficients of friction at different sliding surfaces are within the typical range. This paper summarizes the model description and comparison against test data.« less

  9. Heating of a fully saturated darcian half-space: Pressure generation, fluid expulsion, and phase change

    USGS Publications Warehouse

    Delaney, P.

    1984-01-01

    Analytical solutions are developed for the pressurization, expansion, and flow of one- and two-phase liquids during heating of fully saturated and hydraulically open Darcian half-spaces subjected to a step rise in temperature at its surface. For silicate materials, advective transfer is commonly unimportant in the liquid region; this is not always the case in the vapor region. Volume change is commonly more important than heat of vaporization in determining the position of the liquid-vapor interface, assuring that the temperatures cannot be determined independently of pressures. Pressure increases reach a maximum near the leading edge of the thermal front and penetrate well into the isothermal region of the body. Mass flux is insensitive to the hydraulic properties of the half-space. ?? 1984.

  10. Transcriptome profiling of fully open flowers in a frost-tolerant almond genotype in response to freezing stress.

    PubMed

    Hosseinpour, Batool; Sepahvand, Sadegh; Kamali Aliabad, Kazem; Bakhtiarizadeh, MohammadReza; Imani, Ali; Assareh, Reza; Salami, Seyed Alireza

    2018-02-01

    Spring frost is a major limiting abiotic stress for the cultivation of almonds [Prunus dulcis (Mill.)] in Mediterranean areas or the Middle East. Spring frost, in particular, damages almond fully open flowers, resulting to significant reduction in yield. Little is known about the genetic factors expressed after frost stress in Prunus spp. as well as in almond fully open flowers. Here, we provide the molecular signature of pistils of fully open flowers from a frost-tolerant almond genotype. The level of frost tolerance in this genotype was determined for all three flowering stages and was confirmed by comparing it to two other cultivars using several physiological analyses. Afterwards, comprehensive expression profiling of genes expressed in fully open flowers was performed after being exposed to frost temperatures (during post-thaw period). Clean reads, 27,104,070 and 32,730,772, were obtained for non-frost-treated and frost-treated (FT) libraries, respectively. A total of 62.24 Mb was assembled, generating 50,896 unigenes and 66,906 transcripts. Therefore, 863 upregulated genes and 555 downregulated genes were identified in the FT library. Functional annotation showed that most of the upregulated genes were related to various biological processes involved in responding to abiotic stress. For the first time, a highly expressed cold-shock protein was identified in the reproductive organ of fruit trees. The expression of six genes was validated by RT-PCR. As the first comprehensive analysis of open flowers in a frost-tolerant almond genotype, this study represents a key step toward the molecular breeding of fruit tree species for frost tolerance.

  11. Numerical and experimental analysis of a ducted propeller designed by a fully automated optimization process under open water condition

    NASA Astrophysics Data System (ADS)

    Yu, Long; Druckenbrod, Markus; Greve, Martin; Wang, Ke-qi; Abdel-Maksoud, Moustafa

    2015-10-01

    A fully automated optimization process is provided for the design of ducted propellers under open water conditions, including 3D geometry modeling, meshing, optimization algorithm and CFD analysis techniques. The developed process allows the direct integration of a RANSE solver in the design stage. A practical ducted propeller design case study is carried out for validation. Numerical simulations and open water tests are fulfilled and proved that the optimum ducted propeller improves hydrodynamic performance as predicted.

  12. Turning a remotely controllable observatory into a fully autonomous system

    NASA Astrophysics Data System (ADS)

    Swindell, Scott; Johnson, Chris; Gabor, Paul; Zareba, Grzegorz; Kubánek, Petr; Prouza, Michael

    2014-08-01

    We describe a complex process needed to turn an existing, old, operational observatory - The Steward Observatory's 61" Kuiper Telescope - into a fully autonomous system, which observers without an observer. For this purpose, we employed RTS2,1 an open sourced, Linux based observatory control system, together with other open sourced programs and tools (GNU compilers, Python language for scripting, JQuery UI for Web user interface). This presentation provides a guide with time estimates needed for a newcomers to the field to handle such challenging tasks, as fully autonomous observatory operations.

  13. Through-wafer interrogation of microstructure motion for MEMS feedback control

    NASA Astrophysics Data System (ADS)

    Dawson, Jeremy M.; Chen, Jingdong; Brown, Kolin S.; Famouri, Parviz F.; Hornak, Lawrence A.

    1999-09-01

    Closed-loop MEMS control enables mechanical microsystems to adapt to the demands of the environment which they are actuating opening a new window of opportunity for future MEMS applications. Planar diffractive optical microsystems have the potential to enable the integrated optical interrogation of MEMS microstructure position fully decoupled from the means of mechanical actuation which is central to realization of feedback control. This paper presents the results of initial research evaluating through-wafer optical microsystems for MEMS integrated optical monitoring. Positional monitoring results obtained from a 1.3 micrometer wavelength through- wafer free-space optical probe of a lateral comb resonator fabricated using the Multi-User MEMS Process Service (MUMPS) are presented. Given the availability of positional information via probe signal feedback, a simulation of the application of nonlinear sliding control is presented illustrating position control of the lateral comb resonator structure.

  14. Accessory neuropathy after sternotomy: Clinico-anatomical correlation supporting an inflammatory cause.

    PubMed

    Kassem, Mohammad W; Iwanaga, Joe; Loukas, Marios; Stone, Jonathan J; Smith, Jay; Spinner, Robert J; Tubbs, R Shane

    2018-04-01

    Inflammatory etiologies are becoming increasingly recognized as explanations of some neuropathies, especially those occurring in the perioperative period. Although "brachial neuritis" is known to affect extraplexal nerves, accessory nerve palsy following median sternotomy has been attributed to stretch on the nerve. To better elucidate stretch as a potential cause, a cadaveric study was performed. Two patients who developed accessory nerve palsy following median sternotomy are presented to illustrate features consistent with the diagnosis of a perioperative inflammatory neuropathy. Five adult unembalmed cadavers underwent exposure of the bilateral accessory nerves in the posterior cervical triangle. A median sternotomy was performed and self-retaining retractors positioned. With the head in neutral, left rotation and right rotation, retractors were opened as during surgery while observing and recording any accessory nerve movements. The self-retaining sternal retractors were fully opened to a mean inter-blade distance of 13 cm. Regardless of head position, from the initial retractor click to maximal opening there was no gross movement of the accessory nerve on the left or right sides. Opening self-retaining sternal retractors does not appear to stretch the accessory nerve in the posterior cervical triangle. Based on our clinical experience and cadaveric results, we believe that inflammatory conditions, (i.e., idiopathic brachial plexitis) can involve the accessory nerve, and might be triggered by surgical procedures. Clin. Anat. 31:417-421, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  15. A repositionable valved stent for endovascular treatment of deteriorated bioprostheses.

    PubMed

    Zegdi, Rachid; Khabbaz, Ziad; Borenstein, Nicolas; Fabiani, Jean-Noël

    2006-10-03

    We report our animal experience of endovascular valve replacement (VR) of failed bioprosthesis (BP) using an original delivery catheter allowing repositioning of the valved stent (VS). Among the different devices designed for percutaneous VR, none has the potential for repositioning of a fully deployed VS. Five sheep underwent, on beating heart, tricuspid VR with a stented BP. Prolapse of 1 leaflet was induced by tearing. For the endovascular tricuspid VR, we used a VS constructed with a nitinol self-expandable stent and a porcine stentless aortic valve. We also used an original delivery catheter, allowing repositioning of the VS through a compression or relaxation mechanism of the stent. Epicardial echocardiography and right ventriculography showed severe tricuspid regurgitation, with a regurgitant jet extending to the inferior vena cava. After surgical exposure to the infrarenal inferior vena cava, the VS was successfully implanted inside the failed BP in all cases. Repositioning of the fully deployed VS was always possible. Echocardiographic and macroscopic studies revealed adequate VS positioning, excellent leaflet opening, and absence of any intraprosthetic or periprosthetic leak. Endovascular VR was easily performed in sheep with failed BP in the tricuspid position. The novel delivery catheter allowed adequate repositioning of our fully deployed VS before its definitive release. One may anticipate that the safety improvement conferred by this new technology will certainly favor the development of percutaneous VR in clinical practice.

  16. Biochemical acclimation, stomatal limitation and precipitation patterns underlie decreases in photosynthetic stimulation of Soybean (Glycine max) at elevated [CO2] and temperatures under fully open air field conditions

    USDA-ARS?s Scientific Manuscript database

    The net effect of elevated [CO2] and temperature on photosynthetic acclimation and plant productivity is poorly resolved. We assessed the effects of canopy warming and fully open air [CO2] enrichment on 1) the acclimation of two biochemical parameters that frequently limit photosynthesis (A), the ma...

  17. Magnetar giant flares in multipolar magnetic fields. I. Fully and partially open eruptions of flux ropes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Huang, Lei; Yu, Cong, E-mail: muduri@shao.ac.cn, E-mail: cyu@ynao.ac.cn

    2014-04-01

    We propose a catastrophic eruption model for the enormous energy release of magnetars during giant flares, in which a toroidal and helically twisted flux rope is embedded within a force-free magnetosphere. The flux rope stays in stable equilibrium states initially and evolves quasi-statically. Upon the loss of equilibrium, the flux rope cannot sustain the stable equilibrium states and erupts catastrophically. During the process, the magnetic energy stored in the magnetosphere is rapidly released as the result of destabilization of global magnetic topology. The magnetospheric energy that could be accumulated is of vital importance for the outbursts of magnetars. We carefullymore » establish the fully open fields and partially open fields for various boundary conditions at the magnetar surface and study the relevant energy thresholds. By investigating the magnetic energy accumulated at the critical catastrophic point, we find that it is possible to drive fully open eruptions for dipole-dominated background fields. Nevertheless, it is hard to generate fully open magnetic eruptions for multipolar background fields. Given the observational importance of the multipolar magnetic fields in the vicinity of the magnetar surface, it would be worthwhile to explore the possibility of the alternative eruption approach in multipolar background fields. Fortunately, we find that flux ropes may give rise to partially open eruptions in the multipolar fields, which involve only partial opening of background fields. The energy release fractions are greater for cases with central-arcaded multipoles than those with central-caved multipoles that emerged in background fields. Eruptions would fail only when the centrally caved multipoles become extremely strong.« less

  18. Electrotunable nanoplasmonic liquid mirror

    NASA Astrophysics Data System (ADS)

    Montelongo, Yunuen; Sikdar, Debabrata; Ma, Ye; McIntosh, Alastair J. S.; Velleman, Leonora; Kucernak, Anthony R.; Edel, Joshua B.; Kornyshev, Alexei A.

    2017-11-01

    Recently, there has been a drive to design and develop fully tunable metamaterials for applications ranging from new classes of sensors to superlenses among others. Although advances have been made, tuning and modulating the optical properties in real time remains a challenge. We report on the first realization of a reversible electrotunable liquid mirror based on voltage-controlled self-assembly/disassembly of 16 nm plasmonic nanoparticles at the interface between two immiscible electrolyte solutions. We show that optical properties such as reflectivity and spectral position of the absorption band can be varied in situ within +/-0.5 V. This observed effect is in excellent agreement with theoretical calculations corresponding to the change in average interparticle spacing. This electrochemical fully tunable nanoplasmonic platform can be switched from a highly reflective `mirror' to a transmissive `window' and back again. This study opens a route towards realization of such platforms in future micro/nanoscale electrochemical cells, enabling the creation of tunable plasmonic metamaterials.

  19. Students in Fully Online Programs Report More Positive Attitudes toward Science Than Students in Traditional, In-Person Programs

    PubMed Central

    Perera, Viranga; Mead, Chris; Buxner, Sanlyn; Lopatto, David; Horodyskyj, Lev; Semken, Steven; Anbar, Ariel D.

    2017-01-01

    Following the growth of online, higher-education courses, academic institutions are now offering fully online degree programs. Yet it is not clear how students who enroll in fully online degree programs are similar to those students who enroll in in-person (“traditional”) degree programs. Because previous work has shown students’ attitudes toward science can affect their performance in a course, it is valuable to ask how attitudes toward science differ between these two populations. We studied students who completed a fully online astrobiology course. In an analysis of 451 student responses to the Classroom Undergraduate Research Experience survey, we found online program students began the course with a higher scientific sophistication and a higher sense of personal value of science than those in traditional programs. Precourse attitudes also showed some predictive power of course grades among online students, but not for traditional students. Given established relationships between feelings of personal value, intrinsic motivation, and, in turn, traits such as persistence, our results suggest that open-ended or exploration-based learning may be more engaging to online program students due to their pre-existing attitudes. The converse may also be true, that certain pre-existing attitudes among online program students are more detrimental than they are for traditional program students. PMID:29146666

  20. Large fully retractable telescope enclosures still closable in strong wind

    NASA Astrophysics Data System (ADS)

    Bettonvil, Felix C. M.; Hammerschlag, Robert H.; Jägers, Aswin P. L.; Sliepen, Guus

    2008-07-01

    Two prototypes of fully retractable enclosures with diameters of 7 and 9 m have been built for the high-resolution solar telescopes DOT (Dutch Open Telescope) and GREGOR, both located at the Canary Islands. These enclosures protect the instruments for bad weather and are fully open when the telescopes are in operation. The telescopes and enclosures also operate in hard wind. The prototypes are based on tensioned membrane between movable but stiff bows, which fold together to a ring when opened. The height of the ring is small. The prototypes already survived several storms, with often snow and ice, without any damage, including hurricane Delta with wind speeds up to 68 m/s. The enclosures can still be closed and opened with wind speeds of 20 m/s without any problems or restrictions. The DOT successfully demonstrated the open, wind-flushing concept for astronomical telescopes. It is now widely recognized that also large future telescopes benefit from wind-flushing and retractable enclosures. These telescopes require enclosures with diameters of 30 m until roughly 100 m, the largest sizes for the ELTs (Extreme Large Telescopes), which will be built in the near future. We discuss developments and required technology for the realization of these large sizes.

  1. Actuator operated microvalves

    NASA Technical Reports Server (NTRS)

    Okojie, Robert S. (Inventor)

    2008-01-01

    An actuator operated microvalve and the method of making same is disclosed and claimed. The microvalve comprises a SiC housing which includes a first lower portion and a second upper portion. The lower portion of the SiC housing includes a passageway therethrough, a microvalve seat, and a moveable SiC diaphragm. The SiC diaphragm includes a centrally located boss and radially extending corrugations which may be sinusoidally shaped. The boss of the SiC diaphragm moves and modulates in a range of positions between a closed position wherein the boss interengages said microvalve seat prohibiting communication of fluid through the passageway and a fully open position when the boss is spaced apart from the seat at its maximum permitting communication of fluid through said passageway. The actuator includes a SiC top plate affixed to the boss of the diaphragm and a first electrode and the second upper portion of the SiC housing further includes a second electrode.

  2. Basic study of entire whole-body PET scanners based on the OpenPET geometry

    NASA Astrophysics Data System (ADS)

    Yoshida, Eiji; Yamaya, Taiga; Nishikido, Fumihiko; Inadama, Naoko; Murayama, Hideo

    2010-09-01

    A conventional PET scanner has a 15-25 cm axial field-of-view (FOV) and images a whole body using about six bed positions. An OpenPET geometry can extend the axial FOV with a limited number of detectors. The entire whole-body PET scanner must be able to process a large amount of data effectively. In this work, we study feasibility of the fully 3D entire whole-body PET scanner using the GATE simulation. The OpenPET has 12 block detector rings with the ring diameter of 840 mm and each block detector ring consists of 48 depth-of-interaction (DOI) detectors. The OpenPET has the axial length of 895.95 mm with five parts of 58.95 mm open gaps. The OpenPET has higher single data loss than a conventional PET scanner at grouping circuits. NECR of the OpenPET decreases by single data loss. But single data loss is mitigated by separating the axially arranged detector into two parts. Also, multiple coincidences are found to be important for the entire whole-body PET scanner. The entire whole-body PET scanner with the OpenPET geometry promises to provide a large axial FOV with the open space and to have sufficient performance values. But single data loss at the grouping circuits and multiple coincidences are limited to the peak noise equivalent count rate (NECR) for the entire whole-body PET scanner.

  3. Skylab

    NASA Image and Video Library

    1972-05-01

    Technicians at NASA’s Marshall Space Flight Center check the wiring on a mechanical test article of the Apollo Telescope Mount (ATM) solar array. Four such arrays were joined in a cross to provide electric power for the ATM in Earth orbit. The deployment mechanism for extending the wing to the fully open position had just been tested when this photograph was taken. The array was suspended from beams riding on air bearings to closely simulate the weightless conditions under which it would be deployed in space. The wings are folded against the sides of the ATM for launch and are deployed by a scissors mechanism in Earth’s orbit.

  4. 33 CFR 117.5 - When the drawbridge must open.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false When the drawbridge must open... BRIDGES DRAWBRIDGE OPERATION REGULATIONS General Requirements § 117.5 When the drawbridge must open. Except as otherwise authorized or required by this part, drawbridges must open promptly and fully for the...

  5. 33 CFR 117.5 - When the drawbridge must open.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false When the drawbridge must open... BRIDGES DRAWBRIDGE OPERATION REGULATIONS General Requirements § 117.5 When the drawbridge must open. Except as otherwise authorized or required by this part, drawbridges must open promptly and fully for the...

  6. 33 CFR 117.5 - When the drawbridge must open.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false When the drawbridge must open... BRIDGES DRAWBRIDGE OPERATION REGULATIONS General Requirements § 117.5 When the drawbridge must open. Except as otherwise authorized or required by this part, drawbridges must open promptly and fully for the...

  7. 33 CFR 117.5 - When the drawbridge must open.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false When the drawbridge must open... BRIDGES DRAWBRIDGE OPERATION REGULATIONS General Requirements § 117.5 When the drawbridge must open. Except as otherwise authorized or required by this part, drawbridges must open promptly and fully for the...

  8. 33 CFR 117.5 - When the drawbridge must open.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false When the drawbridge must open... BRIDGES DRAWBRIDGE OPERATION REGULATIONS General Requirements § 117.5 When the drawbridge must open. Except as otherwise authorized or required by this part, drawbridges must open promptly and fully for the...

  9. Open source acceleration of wave optics simulations on energy efficient high-performance computing platforms

    NASA Astrophysics Data System (ADS)

    Beck, Jeffrey; Bos, Jeremy P.

    2017-05-01

    We compare several modifications to the open-source wave optics package, WavePy, intended to improve execution time. Specifically, we compare the relative performance of the Intel MKL, a CPU based OpenCV distribution, and GPU-based version. Performance is compared between distributions both on the same compute platform and between a fully-featured computing workstation and the NVIDIA Jetson TX1 platform. Comparisons are drawn in terms of both execution time and power consumption. We have found that substituting the Fast Fourier Transform operation from OpenCV provides a marked improvement on all platforms. In addition, we show that embedded platforms offer some possibility for extensive improvement in terms of efficiency compared to a fully featured workstation.

  10. Nucleosome positioning from tiling microarray data.

    PubMed

    Yassour, Moran; Kaplan, Tommy; Jaimovich, Ariel; Friedman, Nir

    2008-07-01

    The packaging of DNA around nucleosomes in eukaryotic cells plays a crucial role in regulation of gene expression, and other DNA-related processes. To better understand the regulatory role of nucleosomes, it is important to pinpoint their position in a high (5-10 bp) resolution. Toward this end, several recent works used dense tiling arrays to map nucleosomes in a high-throughput manner. These data were then parsed and hand-curated, and the positions of nucleosomes were assessed. In this manuscript, we present a fully automated algorithm to analyze such data and predict the exact location of nucleosomes. We introduce a method, based on a probabilistic graphical model, to increase the resolution of our predictions even beyond that of the microarray used. We show how to build such a model and how to compile it into a simple Hidden Markov Model, allowing for a fast and accurate inference of nucleosome positions. We applied our model to nucleosomal data from mid-log yeast cells reported by Yuan et al. and compared our predictions to those of the original paper; to a more recent method that uses five times denser tiling arrays as explained by Lee et al.; and to a curated set of literature-based nucleosome positions. Our results suggest that by applying our algorithm to the same data used by Yuan et al. our fully automated model traced 13% more nucleosomes, and increased the overall accuracy by about 20%. We believe that such an improvement opens the way for a better understanding of the regulatory mechanisms controlling gene expression, and how they are encoded in the DNA.

  11. Finding Resolution for the Responsible Transparency of Economic Models in Health and Medicine.

    PubMed

    Padula, William V; McQueen, Robert Brett; Pronovost, Peter J

    2017-11-01

    The Second Panel on Cost-Effectiveness in Health and Medicine recommendations for conduct, methodological practices, and reporting of cost-effectiveness analyses has a number of questions unanswered with respect to the implementation of transparent, open source code interface for economic models. The possibility of making economic model source code could be positive and progressive for the field; however, several unintended consequences of this system should be first considered before complete implementation of this model. First, there is the concern regarding intellectual property rights that modelers have to their analyses. Second, the open source code could make analyses more accessible to inexperienced modelers, leading to inaccurate or misinterpreted results. We propose several resolutions to these concerns. The field should establish a licensing system of open source code such that the model originators maintain control of the code use and grant permissions to other investigators who wish to use it. The field should also be more forthcoming towards the teaching of cost-effectiveness analysis in medical and health services education so that providers and other professionals are familiar with economic modeling and able to conduct analyses with open source code. These types of unintended consequences need to be fully considered before the field's preparedness to move forward into an era of model transparency with open source code.

  12. Profiling the ‘Pro-environmental Individual’: A Personality Perspective

    PubMed Central

    Markowitz, Ezra M.; Goldberg, Lewis R.; Ashton, Michael C.; Lee, Kibeom

    2011-01-01

    There is considerable scientific interest in the psychological correlates of pro-environmental behaviors. Much research has focused on demographic and social-psychological characteristics of individuals who consistently perform such actions. Here, we report the results of two studies in which we explored relations between broad personality traits and pro-environmental actions. Using a wide variety of behavior and personality measures, we consistently found moderate positive relations between Openness to Experience and pro-environmental activities in both a community sample (Study 1: N = 778) and an undergraduate student sample (Study 2: N = 115). In Study 2 we showed that the effect of Openness on pro-environmental behaviors was fully mediated by individuals’ environmental attitudes and connection to nature. Our findings suggest that high levels of aesthetic appreciation, creativity, and inquisitiveness, but not personality traits associated with altruism, may have motivated the performance of pro-environmental actions among our respondents. Implications for intervention development are discussed. PMID:21241310

  13. Sensitivity of equatorial Pacific and Indian Ocean watermasses to the position of the Indonesian Throughflow

    NASA Astrophysics Data System (ADS)

    Rodgers, Keith B.; Latif, Mojib; Legutke, Stephanie

    2000-09-01

    The sensitivity of the thermal structure of the equatorial Pacific and Indian Ocean pycnoclines to a model's representation of the Indonesian Straits connecting the two basins is investigated. Two integrations are performed using the global HOPE ocean model. The initial conditions and surface forcing for both cases are identical; the only difference between the runs is that one has an opening for the Indonesian Straits which spans the equator on the Pacific side, and the other has an opening which lies fully north of the equator. The resulting sensitivity throughout much of the upper ocean is greater than 0.5°C for both the equatorial Indian and Pacific. A realistic simulation of net Indonesian Throughflow (ITF) transport (measured in Sverdrups) is not sufficient for an adequate simulation of equatorial watermasses. The ITF must also contain a realistic admixture of northern and southern Pacific source water.

  14. Fully-automated approach to hippocampus segmentation using a graph-cuts algorithm combined with atlas-based segmentation and morphological opening.

    PubMed

    Kwak, Kichang; Yoon, Uicheul; Lee, Dong-Kyun; Kim, Geon Ha; Seo, Sang Won; Na, Duk L; Shim, Hack-Joon; Lee, Jong-Min

    2013-09-01

    The hippocampus has been known to be an important structure as a biomarker for Alzheimer's disease (AD) and other neurological and psychiatric diseases. However, it requires accurate, robust and reproducible delineation of hippocampal structures. In this study, an automated hippocampal segmentation method based on a graph-cuts algorithm combined with atlas-based segmentation and morphological opening was proposed. First of all, the atlas-based segmentation was applied to define initial hippocampal region for a priori information on graph-cuts. The definition of initial seeds was further elaborated by incorporating estimation of partial volume probabilities at each voxel. Finally, morphological opening was applied to reduce false positive of the result processed by graph-cuts. In the experiments with twenty-seven healthy normal subjects, the proposed method showed more reliable results (similarity index=0.81±0.03) than the conventional atlas-based segmentation method (0.72±0.04). Also as for segmentation accuracy which is measured in terms of the ratios of false positive and false negative, the proposed method (precision=0.76±0.04, recall=0.86±0.05) produced lower ratios than the conventional methods (0.73±0.05, 0.72±0.06) demonstrating its plausibility for accurate, robust and reliable segmentation of hippocampus. Copyright © 2013 Elsevier Inc. All rights reserved.

  15. Maternal enrichment affects prenatal hippocampal proliferation and open-field behaviors in female offspring mice.

    PubMed

    Maruoka, Takashi; Kodomari, Ikuko; Yamauchi, Rena; Wada, Etsuko; Wada, Keiji

    2009-04-17

    The maternal environment is thought to be important for fetal brain development. However, the effects of maternal environment are not fully understood. Here, we investigated whether enrichment of the maternal environment can influence prenatal brain development and postnatal behaviors in mice. An enriched environment is a housing condition with several objects such as a running wheel, tube and ladder, which are thought to increase sensory, cognitive and motor stimulation in rodents compared with standard housing conditions. First, we measured the number of BrdU-positive cells in the hippocampal dentate gyrus of fetuses from pregnant dams housed in an enriched environment. Our results revealed that maternal enrichment influences cell proliferation in the hippocampus of female, but not male, fetuses. Second, we used the open-field test to investigate postnatal behaviors in the offspring of dams housed in the enriched environment during pregnancy. We found that maternal enrichment significantly affects the locomotor activity and time spent in the center of the open-field in female, but not male, offspring. These results indicate that maternal enrichment influences prenatal brain development and postnatal behaviors in female offspring.

  16. Through-wafer optical probe characterization for microelectromechanical systems positional state monitoring and feedback control

    NASA Astrophysics Data System (ADS)

    Dawson, Jeremy M.; Chen, Jingdong; Brown, Kolin S.; Famouri, Parviz F.; Hornak, Lawrence A.

    2000-12-01

    Implementation of closed-loop microelectromechanical system (MEMS) control enables mechanical microsystems to adapt to the demands of the environment that they are actuating, opening a broad range of new opportunities for future MEMS applications. Integrated optical microsystems have the potential to enable continuous in situ optical interrogation of MEMS microstructure position fully decoupled from the means of mechanical actuation that is necessary for realization of feedback control. We present the results of initial research evaluating through-wafer optical microprobes for surface micromachined MEMS integrated optical position monitoring. Results from the through-wafer free-space optical probe of a lateral comb resonator fabricated using the multiuser MEMS process service (MUMPS) indicate significant positional information content with an achievable return probe signal dynamic range of up to 80% arising from film transmission contrast. Static and dynamic deflection analysis and experimental results indicate a through-wafer probe positional signal sensitivity of 40 mV/micrometers for the present setup or 10% signal change per micrometer. A simulation of the application of nonlinear sliding control is presented illustrating position control of the lateral comb resonator structure given the availability of positional state information.

  17. Rapid sample classification using an open port sampling interface coupled with liquid introduction atmospheric pressure ionization mass spectrometry

    DOE PAGES

    Van Berkel, Gary J.; Kertesz, Vilmos

    2016-11-15

    An “Open Access”-like mass spectrometric platform to fully utilize the simplicity of the manual open port sampling interface for rapid characterization of unprocessed samples by liquid introduction atmospheric pressure ionization mass spectrometry has been lacking. The in-house developed integrated software with a simple, small and relatively low-cost mass spectrometry system introduced here fills this void. Software was developed to operate the mass spectrometer, to collect and process mass spectrometric data files, to build a database and to classify samples using such a database. These tasks were accomplished via the vendorprovided software libraries. Sample classification based on spectral comparison utilized themore » spectral contrast angle method. As a result, using the developed software platform near real-time sample classification is exemplified using a series of commercially available blue ink rollerball pens and vegetable oils. In the case of the inks, full scan positive and negative ion ESI mass spectra were both used for database generation and sample classification. For the vegetable oils, full scan positive ion mode APCI mass spectra were recorded. The overall accuracy of the employed spectral contrast angle statistical model was 95.3% and 98% in case of the inks and oils, respectively, using leave-one-out cross-validation. In conclusion, this work illustrates that an open port sampling interface/mass spectrometer combination, with appropriate instrument control and data processing software, is a viable direct liquid extraction sampling and analysis system suitable for the non-expert user and near real-time sample classification via database matching.« less

  18. Rapid sample classification using an open port sampling interface coupled with liquid introduction atmospheric pressure ionization mass spectrometry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Van Berkel, Gary J.; Kertesz, Vilmos

    An “Open Access”-like mass spectrometric platform to fully utilize the simplicity of the manual open port sampling interface for rapid characterization of unprocessed samples by liquid introduction atmospheric pressure ionization mass spectrometry has been lacking. The in-house developed integrated software with a simple, small and relatively low-cost mass spectrometry system introduced here fills this void. Software was developed to operate the mass spectrometer, to collect and process mass spectrometric data files, to build a database and to classify samples using such a database. These tasks were accomplished via the vendorprovided software libraries. Sample classification based on spectral comparison utilized themore » spectral contrast angle method. As a result, using the developed software platform near real-time sample classification is exemplified using a series of commercially available blue ink rollerball pens and vegetable oils. In the case of the inks, full scan positive and negative ion ESI mass spectra were both used for database generation and sample classification. For the vegetable oils, full scan positive ion mode APCI mass spectra were recorded. The overall accuracy of the employed spectral contrast angle statistical model was 95.3% and 98% in case of the inks and oils, respectively, using leave-one-out cross-validation. In conclusion, this work illustrates that an open port sampling interface/mass spectrometer combination, with appropriate instrument control and data processing software, is a viable direct liquid extraction sampling and analysis system suitable for the non-expert user and near real-time sample classification via database matching.« less

  19. In Situ Poling and Imidization of Amorphous Piezoelectric Polyimides

    NASA Technical Reports Server (NTRS)

    Park, Cheol; Ounaies, Zoubeida; Wise, Kristopher E.; Harrison, Joycelyn S.; Bushnell, Dennis M. (Technical Monitor)

    2002-01-01

    An amorphous piezoelectric polyimide containing polar functional groups has been developed using a combination of experimental and molecular modeling for potential use in high temperature applications. This amorphous polyimide, (Beta-CN)APB/ODPA, has exhibited good thermal stability and piezoelectric response at temperatures up to 150C. Density functional calculations predicted that a partially cured amic acid (open imide ring) possesses a dipole moment four times larger than the fully imidized closed ring. In situ poling and imidization of the partially cured (Beta-CN)APB/ODPA, was studied in an attempt to maximize the degree of dipolar orientation and the resultant piezoelectric response. A positive corona poling was used to minimize localized arcing during poling and to allow use of higher poling fields without dielectric breakdown. The dielectric relaxation strength, remanent polarization, and piezoelectric response were evaluated as a function of the poling profile. The partially cured, corona poled polymers exhibited higher dielectric relaxation strength (delta varepsilon), remanent polarization (Pr) and piezoelectric strain coefficient (d33) than the fully cured, conventionally poled ones.

  20. Open-mouthed hybrid microcapsules with elevated enzyme loading and enhanced catalytic activity.

    PubMed

    Shi, Jiafu; Zhang, Shaohua; Wang, Xiaoli; Jiang, Zhongyi

    2014-10-25

    Open-mouthed hybrid microcapsules (HMCs) are synthesized through a hard-templating method. When utilized for enzyme immobilization and enzymatic catalysis, the open-mouthed HMCs show high enzyme loading capability, enhanced catalytic activity and desirable recycling stability, due to their fully exposed outer and inner surfaces.

  1. TREATMENT WITH THIDIAZURON IMPROVES OPENING AND VASE LIFE OF IRIS FLOWERS

    USDA-ARS?s Scientific Manuscript database

    The marketability of Dutch iris (Iris × hollandica) cut flowers is limited by their short display life and frequent failure to open fully. We tested the ability of thidiazuron (TDZ), a phenyl urea compound with cytokinin-like activity, to improve iris flower opening and longevity. A postharvest pu...

  2. 49 CFR 1104.3 - Copies.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... fully evaluate evidence, all spreadsheets must be fully accessible and manipulable. Electronic databases... Microsoft Open Database Connectivity (ODBC) standard. ODBC is a Windows technology that allows a database software package to import data from a database created using a different software package. We currently...

  3. 49 CFR 1104.3 - Copies.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... fully evaluate evidence, all spreadsheets must be fully accessible and manipulable. Electronic databases... Microsoft Open Database Connectivity (ODBC) standard. ODBC is a Windows technology that allows a database software package to import data from a database created using a different software package. We currently...

  4. 49 CFR 1104.3 - Copies.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... fully evaluate evidence, all spreadsheets must be fully accessible and manipulable. Electronic databases... Microsoft Open Database Connectivity (ODBC) standard. ODBC is a Windows technology that allows a database software package to import data from a database created using a different software package. We currently...

  5. 49 CFR 1104.3 - Copies.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... fully evaluate evidence, all spreadsheets must be fully accessible and manipulable. Electronic databases... Microsoft Open Database Connectivity (ODBC) standard. ODBC is a Windows technology that allows a database software package to import data from a database created using a different software package. We currently...

  6. Waterway wide area tactical coverage and homing (WaterWATCH) program overview

    NASA Astrophysics Data System (ADS)

    Driggers, Gerald; Cleveland, Tammy; Araujo, Lisa; Spohr, Robert; Umansky, Mark

    2008-04-01

    The Congressional and Army sponsored WaterWATCH TM Program has developed and demonstrated a fully integrated shallow water port and facility monitoring system. It provides fully automated monitoring of domains above and below the surface of the water using primarily off-the-shelf sensors and software. The system is modular, open architecture and IP based, and elements can be mixed and matched to adapt to specific applications. The sensors integrated into the WaterWATCH TM system include cameras, radar, passive and active sonar, and various motion detectors. The sensors were chosen based on extensive requirements analyses and tradeoffs. Descriptions of the system and individual sensors are provided, along with data from modular and system level testing. Camera test results address capabilities and limitations associated with using "smart" image analysis software with stressing environmental issues such as bugs, darkness, rain and snow. Radar issues addressed include achieving range and resolution requirements. The passive sonar capability to provide near 100% true positives with zero false positives is demonstrated. Testing results are also presented to show that inexpensive active sonar can be effective against divers with or without SCUBA gear and that false alarms due to fish can be minimized. A simple operator interface has also been demonstrated.

  7. Flow determination of a pump-turbine at zero discharge

    NASA Astrophysics Data System (ADS)

    Edinger, G.; Erne, S.; Doujak, E.; Bauer, C.

    2014-03-01

    When starting up a reversible Francis pump-turbine in pump mode, the machine may operate at zero flow at a given gate opening. Besides reversal flow and prerotation in the draft tube cone, the onset of a fully separated flow in the vaned diffuser is observable at zero- discharge condition. In this paper, the occurrence of prerotation and reversal flow in the conical draft tube and the flow in one stay vane channel of a pump-turbine are examined experimentally and compared to numerical simulations. In order to assess the strongly three-dimensional flow in the stay vane channel, measurements with a 2D laser doppler velocimeter (LDV) were performed at various positions. The inlet flow in the draft tube cone, which becomes significantly at zero discharge in pump mode, is investigated by velocity measurements at two different positions. Pressure fluctuations in the draft tube cone induced by complex flow patterns are also recorded and analyzed. It is found that the swirl number at zero discharge does not significant differ from the values obtained at very low load pumping. Experimental investigations combined with CFD have shown that in the stay vane channel flow velocity components different from zero occur even at no discharge. Streamline plots show the fully separated flow structure.

  8. Lightweight extendable and retractable pole

    DOEpatents

    Warren, John L.; Brandt, James E.

    1994-01-01

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole.

  9. Lightweight extendable and retractable pole

    DOEpatents

    Warren, J.L.; Brandt, J.E.

    1994-08-02

    A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole. 18 figs.

  10. Using a Neural Network to Determine the Hatch Status of the AERI at the ARM North Slope of Alaska Site

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zwink, AB; Turner, DD

    2012-03-19

    The fore-optics of the Atmospheric Emitted Radiance Interferometer (AERI) are protected by an automated hatch to prevent precipitation from fouling the instrument's scene mirror (Knuteson et al. 2004). Limit switches connected with the hatch controller provide a signal of the hatch state: open, closed, undetermined (typically associated with the hatch being between fully open or fully closed during the instrument's sky view period), or an error condition. The instrument then records the state of the hatch with the radiance data so that samples taken when the hatch is not open can be removed from any subsequent analysis. However, the hatchmore » controller suffered a multi-year failure for the AERI located at the ARM North Slope of Alaska (NSA) Central Facility in Barrow, Alaska, from July 2006-February 2008. The failure resulted in misreporting the state of the hatch in the 'hatchOpen' field within the AERI data files. With this error there is no simple solution to translate what was reported back to the correct hatch status, thereby making it difficult for an analysis to determine when the AERI was actually viewing the sky. As only the data collected when the hatch is fully open are scientifically useful, an algorithm was developed to determine whether the hatch was open or closed based on spectral radiance data from the AERI. Determining if the hatch is open or closed in a scene with low clouds is non-trivial, as low opaque clouds may look very similar spectrally as the closed hatch. This algorithm used a backpropagation neural network; these types of neural networks have been used with increasing frequency in atmospheric science applications.« less

  11. Unmanned Aerial Systems: Further Actions Needed to Fully Address Air Force and Army Pilot Workforce Challenges

    DTIC Science & Technology

    2016-03-16

    UNMANNED AERIAL SYSTEMS Further Actions Needed to Fully Address Air Force and Army Pilot Workforce Challenges...Armed Services, U.S. Senate March 16, 2016 UNMANNED AERIAL SYSTEMS Further Actions Needed to Fully Address Air Force and Army Pilot Workforce ...High-performing organizations use complete and current data to inform their strategic human capital planning and remain open to reevaluating workforce

  12. A Journey Toward Cultural Competence: The Role of Researcher Reflexivity in Indigenous Research.

    PubMed

    Nilson, Caroline

    2017-03-01

    This article highlights the personal journey of reflective development that a non-Aboriginal White researcher and health professional underwent to be "fully positioned" in the everyday lives of a rural Australian Aboriginal community in Western Australia. The article explains the researcher's personal development in areas important to building respect, building relationships, and ensuring reciprocity while undertaking Aboriginal research. The researcher reports on the reflective evaluation of her worldview. Understanding that judgment is a natural tendency, the researcher used reflexivity as a tool to examine and contextualize her judgments, presumptions, and preconceptions, which positioned her to be open to differing viewpoints and actively explore alternate perspectives. The researcher explores her evolutionary understanding that cultural competence is not a destination but a continual journey, and she details her knowledge development regarding the Aboriginal research paradigm, which requires that all the learning, sharing, and growth taking place is reciprocal and engages all parties actively.

  13. Analysis of Cisco Open Network Environment (ONE) OpenFlow Controller Implementation

    DTIC Science & Technology

    2014-08-01

    Software - Defined Networking ( SDN ), when fully realized, offer many improvements over the current rigid and...functionalities like handshake, connection setup, switch management, and security. 15. SUBJECT TERMS OpenFlow, software - defined networking , Cisco ONE, SDN ...innovating packet-forwarding technologies. Network device roles are strictly defined with little or no flexibility. In Software - Defined Networks ( SDNs ),

  14. Rapid sample classification using an open port sampling interface coupled with liquid introduction atmospheric pressure ionization mass spectrometry.

    PubMed

    Van Berkel, Gary J; Kertesz, Vilmos

    2017-02-15

    An "Open Access"-like mass spectrometric platform to fully utilize the simplicity of the manual open port sampling interface for rapid characterization of unprocessed samples by liquid introduction atmospheric pressure ionization mass spectrometry has been lacking. The in-house developed integrated software with a simple, small and relatively low-cost mass spectrometry system introduced here fills this void. Software was developed to operate the mass spectrometer, to collect and process mass spectrometric data files, to build a database and to classify samples using such a database. These tasks were accomplished via the vendor-provided software libraries. Sample classification based on spectral comparison utilized the spectral contrast angle method. Using the developed software platform near real-time sample classification is exemplified using a series of commercially available blue ink rollerball pens and vegetable oils. In the case of the inks, full scan positive and negative ion ESI mass spectra were both used for database generation and sample classification. For the vegetable oils, full scan positive ion mode APCI mass spectra were recorded. The overall accuracy of the employed spectral contrast angle statistical model was 95.3% and 98% in case of the inks and oils, respectively, using leave-one-out cross-validation. This work illustrates that an open port sampling interface/mass spectrometer combination, with appropriate instrument control and data processing software, is a viable direct liquid extraction sampling and analysis system suitable for the non-expert user and near real-time sample classification via database matching. Published in 2016. This article is a U.S. Government work and is in the public domain in the USA. Published in 2016. This article is a U.S. Government work and is in the public domain in the USA.

  15. Cooley building opens in Houston. Demonstrates value of fully integrated marketing communications.

    PubMed

    Rees, Tom

    2002-01-01

    The Texas Heart Institute at St. Luke's Episcopal HospiTal in Houston dedicated its new 10-story Denton A. Cooley Building in January. The structure opened with a fanfare, thanks to a well-integrated marketing communications program.

  16. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, T. P., E-mail: tongpu@nudt.edu.cn; Shao, F. Q.; Zou, D. B.

    By using two-dimensional particle-in-cell simulations, we propose a scheme for strong coupling of a petawatt laser with an opening gold cone filled with near-critical-density plasmas. When relevant parameters are properly chosen, most laser energy can be fully deposited inside the cone with only 10% leaving the tip opening. Due to the asymmetric ponderomotive acceleration by the strongly decayed laser pulse, high-energy-density electrons with net laser energy gain are accumulated inside the cone, which then stream out of the tip opening continuously, like a jet. The jet electrons are fully relativistic, with speeds around 0.98−0.998 c and densities at 10{sup 20}/cm{sup 3}more » level. The jet can keep for a long time over 200 fs, which may have diverse applications in practice.« less

  17. Capacity loss on storage and possible capacity recovery for HST nickel-hydrogen cells

    NASA Technical Reports Server (NTRS)

    Lowery, John E.

    1992-01-01

    Negatively precharged nickel hydrogen cells will experience a useable capacity loss during extended open circuit storage periods. Some of the lost capacity can be recovered through cycling. Capacity recovery through cycling can be enhanced by cycling at high depths of discharge (DOD). The most timely procedure for recovering the faded capacity is to charge the cell fully and allow the cell to sit open-circuit at room temperature. This procedure seems to be effective in part because of the enlarged structure of the active materials. The compounds that formed during storage at the low electrode potentials can more easily dissolve and redistribute. All of the original capacity cannot be recovered because the lattice structure of the active material is irreversibly altered during storage. The recommendation is to use positively precharged cells activated with 26 percent KOH if possible. In aerospace applications, the benefits of negative precharge are offset by the possibility of delays and storage periods.

  18. Curriculum Development: A Philosophical Model.

    ERIC Educational Resources Information Center

    Bruening, William H.

    Presenting models based on the philosophies of Carl Rogers, John Dewey, Erich Fromm, and Jean-Paul Sartre, this paper proposes a philosophical approach to education and concludes with pragmatic suggestions concerning teaching based on a fully-functioning-person model. The fully-functioning person is characterized as being open to experience,…

  19. Dynamic modeling and simulation of an integral bipropellant propulsion double-valve combined test system

    NASA Astrophysics Data System (ADS)

    Chen, Yang; Wang, Huasheng; Xia, Jixia; Cai, Guobiao; Zhang, Zhenpeng

    2017-04-01

    For the pressure reducing regulator and check valve double-valve combined test system in an integral bipropellant propulsion system, a system model is established with modular models of various typical components. The simulation research is conducted on the whole working process of an experiment of 9 MPa working condition from startup to rated working condition and finally to shutdown. Comparison of simulation results with test data shows: five working conditions including standby, startup, rated pressurization, shutdown and halt and nine stages of the combined test system are comprehensively disclosed; valve-spool opening and closing details of the regulator and two check valves are accurately revealed; the simulation also clarifies two phenomena which test data are unable to clarify, one is the critical opening state in which the check valve spools slightly open and close alternately in their own fully closed positions, the other is the obvious effects of flow-field temperature drop and temperature rise in pipeline network with helium gas flowing. Moreover, simulation results with consideration of component wall heat transfer are closer to the test data than those under the adiabatic-wall condition, and more able to reveal the dynamic characteristics of the system in various working stages.

  20. Final Aperture Superposition Technique applied to fast calculation of electron output factors and depth dose curves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Faddegon, B.A.; Villarreal-Barajas, J.E.; Mt. Diablo Regional Cancer Center, 2450 East Street, Concord, California

    2005-11-15

    The Final Aperture Superposition Technique (FAST) is described and applied to accurate, near instantaneous calculation of the relative output factor (ROF) and central axis percentage depth dose curve (PDD) for clinical electron beams used in radiotherapy. FAST is based on precalculation of dose at select points for the two extreme situations of a fully open final aperture and a final aperture with no opening (fully shielded). This technique is different than conventional superposition of dose deposition kernels: The precalculated dose is differential in position of the electron or photon at the downstream surface of the insert. The calculation for amore » particular aperture (x-ray jaws or MLC, insert in electron applicator) is done with superposition of the precalculated dose data, using the open field data over the open part of the aperture and the fully shielded data over the remainder. The calculation takes explicit account of all interactions in the shielded region of the aperture except the collimator effect: Particles that pass from the open part into the shielded part, or visa versa. For the clinical demonstration, FAST was compared to full Monte Carlo simulation of 10x10,2.5x2.5, and 2x8 cm{sup 2} inserts. Dose was calculated to 0.5% precision in 0.4x0.4x0.2 cm{sup 3} voxels, spaced at 0.2 cm depth intervals along the central axis, using detailed Monte Carlo simulation of the treatment head of a commercial linear accelerator for six different electron beams with energies of 6-21 MeV. Each simulation took several hours on a personal computer with a 1.7 Mhz processor. The calculation for the individual inserts, done with superposition, was completed in under a second on the same PC. Since simulations for the pre calculation are only performed once, higher precision and resolution can be obtained without increasing the calculation time for individual inserts. Fully shielded contributions were largest for small fields and high beam energy, at the surface, reaching a maximum of 5.6% at 21 MeV. Contributions from the collimator effect were largest for the large field size, high beam energy, and shallow depths, reaching a maximum of 4.7% at 21 MeV. Both shielding contributions and the collimator effect need to be taken into account to achieve an accuracy of 2%. FAST takes explicit account of the shielding contributions. With the collimator effect set to that of the largest field in the FAST calculation, the difference in dose on the central axis (product of ROF and PDD) between FAST and full simulation was generally under 2%. The maximum difference of 2.5% exceeded the statistical precision of the calculation by four standard deviations. This occurred at 18 MeV for the 2.5x2.5 cm{sup 2} field. The differences are due to the method used to account for the collimator effect.« less

  1. In flight image processing on multi-rotor aircraft for autonomous landing

    NASA Astrophysics Data System (ADS)

    Henry, Richard, Jr.

    An estimated $6.4 billion was spent during the year 2013 on developing drone technology around the world and is expected to double in the next decade. However, drone applications typically require strong pilot skills, safety, responsibilities and adherence to regulations during flight. If the flight control process could be safer and more reliable in terms of landing, it would be possible to further develop a wider range of applications. The objective of this research effort is to describe the design and evaluation of a fully autonomous Unmanned Aerial system (UAS), specifically a four rotor aircraft, commonly known as quad copter for precise landing applications. The full landing autonomy is achieved by image processing capabilities during flight for target recognition by employing the open source library OpenCV. In addition, all imaging data is processed by a single embedded computer that estimates a relative position with respect to the target landing pad. Results shows a reduction on the average offset error by 67.88% in comparison to the current return to lunch (RTL) method which only relies on GPS positioning. The present work validates the need for relying on image processing for precise landing applications instead of the inexact method of a commercial low cost GPS dependency.

  2. Cascading Effects of Canopy Opening and Debris Deposition from a Large-Scale Hurricane Experiment in a Tropical Rain Forest

    Treesearch

    Aaron B. Shiels; Grizelle Gonzalez; D. Jean Lodge; Michael R Willig; Jess K. Zimmerman

    2015-01-01

    Intense hurricanes disturb many tropical forests, but the key mechanisms driving post-hurricane forest changes are not fully understood. In Puerto Rico, we used a replicated factorial experiment to determine the mechanisms of forest change associated with canopy openness and organic matter (debris) addition. Cascading effects from canopy openness accounted for...

  3. "I've Never Heard of It Before": Awareness of Open Access at a Small Liberal Arts University

    ERIC Educational Resources Information Center

    Kocken, Gregory J.; Wical, Stephanie H.

    2013-01-01

    Small colleges and universities, often late adopters of institutional repositories and open access initiatives, face challenges that have not fully been explored in the professional literature. In an effort to gauge the level of awareness of open access and institutional repositories at the University of Wisconsin-Eau Claire (UWEC), the authors of…

  4. Selectively Sized Graphene-Based Nanopores for in Situ Single Molecule Sensing

    PubMed Central

    2015-01-01

    The use of nanopore biosensors is set to be extremely important in developing precise single molecule detectors and providing highly sensitive advanced analysis of biological molecules. The precise tailoring of nanopore size is a significant step toward achieving this, as it would allow for a nanopore to be tuned to a corresponding analyte. The work presented here details a methodology for selectively opening nanopores in real-time. The tunable nanopores on a quartz nanopipette platform are fabricated using the electroetching of a graphene-based membrane constructed from individual graphene nanoflakes (ø ∼30 nm). The device design allows for in situ opening of the graphene membrane, from fully closed to fully opened (ø ∼25 nm), a feature that has yet to be reported in the literature. The translocation of DNA is studied as the pore size is varied, allowing for subfeatures of DNA to be detected with slower DNA translocations at smaller pore sizes, and the ability to observe trends as the pore is opened. This approach opens the door to creating a device that can be target to detect specific analytes. PMID:26204996

  5. X-ray crystallographic and MD simulation studies on the mechanism of interfacial activation of a family I.3 lipase with two lids.

    PubMed

    Angkawidjaja, Clement; Matsumura, Hiroyoshi; Koga, Yuichi; Takano, Kazufumi; Kanaya, Shigenori

    2010-07-02

    The interfacial activation mechanism of family I.3 lipase from Pseudomonas sp. MIS38 (PML), which has two alpha-helical lids (lid1 and lid2), was investigated using a combination of X-ray crystallography and molecular dynamics (MD) simulation. The crystal structure of PML in an open conformation was determined at 2.1 A resolution in the presence of Ca(2+) and Triton X-100. Comparison of this structure with that in the closed conformation indicates that both lids greatly change their positions and lid1 is anchored by the calcium ion (Ca1) in the open conformation. This structure was not seriously changed even when the protein was dialyzed extensively against the Ca(2+)-free buffer containing Triton X-100 before crystallization, indicating that the open conformation is fairly stable unless a micellar substance is removed. The crystal structure of the PML derivative, in which the active site serine residue (Ser207) is diethylphosphorylated by soaking the crystal of PML in the open conformation in a solution containing diethyl p-nitrophenyl phosphate, was also determined. This structure greatly resembles that in the open conformation, indicating that PML structure in the open conformation represents that in the active form. MD simulation of PML in the open conformation in the absence of micelles showed that lid2 closes first, while lid1 maintains its open conformation. Likewise, MD simulation of PML in the closed conformation in the absence of Ca(2+) and in the presence of octane or trilaurin micelles showed that lid1 opens, while lid2 remains closed. These results suggest that Ca1 functions as a hook for stabilization of a fully opened conformation of lid1 and for initiation of subsequent opening of lid2. Copyright 2010 Elsevier Ltd. All rights reserved.

  6. 49 CFR 571.206 - Standard No. 206; Door locks and door retention components.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... (GVWR) of 4,536 kg or less. S3. Definitions. Auxiliary Door Latch is a latch equipped with a fully... auxiliary door latch on each hinged door shall not disengage from the fully latched position when an inertia... hinged back door shall also not disengage from the fully latched position when an inertia load is applied...

  7. 49 CFR 571.206 - Standard No. 206; Door locks and door retention components.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... (GVWR) of 4,536 kg or less. S3. Definitions. Auxiliary Door Latch is a latch equipped with a fully... auxiliary door latch on each hinged door shall not disengage from the fully latched position when an inertia... hinged back door shall also not disengage from the fully latched position when an inertia load is applied...

  8. 49 CFR 571.206 - Standard No. 206; Door locks and door retention components.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... (GVWR) of 4,536 kg or less. S3. Definitions. Auxiliary Door Latch is a latch equipped with a fully... auxiliary door latch on each hinged door shall not disengage from the fully latched position when an inertia... hinged back door shall also not disengage from the fully latched position when an inertia load is applied...

  9. 49 CFR 571.206 - Standard No. 206; Door locks and door retention components.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... (GVWR) of 4,536 kg or less. S3. Definitions. Auxiliary Door Latch is a latch equipped with a fully... auxiliary door latch on each hinged door shall not disengage from the fully latched position when an inertia... hinged back door shall also not disengage from the fully latched position when an inertia load is applied...

  10. Don/doff support stand for use with rear entry space suits

    NASA Technical Reports Server (NTRS)

    Kosmo, Joseph J. (Inventor); Tri, Terry O. (Inventor); Spenny, William E. (Inventor); West, Philip R. (Inventor)

    1988-01-01

    A don/doff support stand for use with rear entry space suits is disclosed. The support stand is designed for use in one-g environments; however, certain features of the stand can be used on future spacecraft, lunar, or planetary bases. The present invention has a retainer which receives a protrucing lug fixed on the torso section of the space suit. When the lug is locked in the retainer, the space suit is held in a generally upright position. In a one-g environment a portable ladder is positioned adjacent to the rear entry of the space suit supported by the stand. The astronaut climbs up the ladder and grasps a hand bar assembly positioned above the rear entry. The astronaut then slips his legs through the open rear entry and down into the abdominal portion of the suite. The astronaut then lowers himself fully into the suit. The portable ladder is then removed and the astronaut can close the rear entry door. The lug is then disengaged from the retainer and the astronaut is free to engage in training exercises in the suit. When suit use is over, the astronaut returns to the stand and inserts the lug into the retainer. A technician repositions the ladder. The astronaut opens the rear entry door, grasps the hand bar assembly and does a chin-up to extricate himself from the suit. The astronaut climbs down the movable ladder while the suit is supported by the stand.

  11. Don/Doff support stand for use with rear entry space suits

    NASA Technical Reports Server (NTRS)

    Kosmo, Joseph J. (Inventor); Tri, Terry O. (Inventor); Spenny, William E. (Inventor); West, Philip R. (Inventor)

    1989-01-01

    A don/doff support stand for use with rear entry space suits is disclosed. The support stand is designed for use in one-g environments; however, certain features of the stand can be used on future space-craft, lunar or planetary bases. The present invention has a retainer which receives a protruding lug fixed on the torso section of the space suit. When the lug is locked in the retainer, the space suit is held in a generally upright position. In a one-g environment a portable ladder is positioned adjacent to the rear entry of the space suit supported by the stand. The astronaut climbs up the ladder and grasps a hand bar assembly positioned above the rear entry. The astronaut then slips his legs through the open rear entry and down into the abdominal portion of the suit. The astronaut then lowers himself fully into the suit. The portable ladder is then removed and the astronaut can close the rear entry door. The lug is then disengaged from the retainer and the astronaut is free to engage in training exercises in the suit. When suit use is over, the astronaut returns to the stand and inserts the lug into the retainer. A technician repositions the ladder. The astronaut opens the rear entry door, grasps the hand bar assembly and does a chin-up to extricate himself from the suit. The astronaut climbs down the movable ladder while the suit is supported by the stand.

  12. [The changed picture of the aged in advertising--results of a recent study 1985].

    PubMed

    Dennersmann, U; Ludwig, R

    1986-01-01

    The proportion of advertisements relevant to older people in selected papers has increased. Advertisements including this age group have increased considerably, especially in TV and women's magazines. The image of older people is more positive, to the extent that they are not so isolated. Also the enlarged number of illustrations with married couples, job-fellows or social gatherings shows that these three important spheres of life are also fully assigned to older people. Professions are also being seen more often. The outcome of "Markenkompass 1982" shows that older people are far more receptive to advertising than younger ones. As a consequence of this it should be noted that in 1985 advertising experts more often aroused additional demands from this open-mindedness, for example out of ties with tradition, and gave the older people they depicted a more open character than in 1975. If we look at the function older people in advertising, this up-to-date character is nevertheless coupled with the stereotype attributes of wisdom and experience and therefore receives a more positive valuation. The presentation of older people in advertising is, by the way, very realistic. The conspectus now shows a much more positive "image of the old" than was to be found ten years ago. An analysis of the products offered, however, shows that the advertising experts still regard the older primarily as consumers of medical products, even if in a reduced form.(ABSTRACT TRUNCATED AT 250 WORDS)

  13. A study of institutional spending on open access publication fees in Germany.

    PubMed

    Jahn, Najko; Tullney, Marco

    2016-01-01

    Publication fees as a revenue source for open access publishing hold a prominent place on the agendas of researchers, policy makers, and academic publishers. This study contributes to the evolving empirical basis for funding these charges and examines how much German universities and research organisations spent on open access publication fees. Using self-reported cost data from the Open APC initiative, the analysis focused on the amount that was being spent on publication fees, and compared these expenditure with data from related Austrian (FWF) and UK (Wellcome Trust, Jisc) initiatives, in terms of both size and the proportion of articles being published in fully and hybrid open access journals. We also investigated how thoroughly self-reported articles were indexed in Crossref, a DOI minting agency for scholarly literature, and analysed how the institutional spending was distributed across publishers and journal titles. According to self-reported data from 30 German universities and research organisations between 2005 and 2015, expenditures on open access publication fees increased over the years in Germany and amounted to € 9,627,537 for 7,417 open access journal articles. The average payment was € 1,298, and the median was € 1,231. A total of 94% of the total article volume included in the study was supported in accordance with the price cap of € 2,000, a limit imposed by the Deutsche Forschungsgemeinschaft (DFG) as part of its funding activities for open access funding at German universities. Expenditures varied considerably at the institutional level. There were also differences in how much the institutions spent per journal and publisher. These differences reflect, at least in part, the varying pricing schemes in place including discounted publication fees. With an indexing coverage of 99%, Crossref thoroughly indexed the open access journals articles included in the study. A comparison with the related openly available cost data from Austria and the UK revealed that German universities and research organisations primarily funded articles in fully open access journals. By contrast, articles in hybrid journal accounted for the largest share of spending according to the Austrian and UK data. Fees paid for hybrid journals were on average more expensive than those paid for fully open access journals.

  14. A study of institutional spending on open access publication fees in Germany

    PubMed Central

    Tullney, Marco

    2016-01-01

    Publication fees as a revenue source for open access publishing hold a prominent place on the agendas of researchers, policy makers, and academic publishers. This study contributes to the evolving empirical basis for funding these charges and examines how much German universities and research organisations spent on open access publication fees. Using self-reported cost data from the Open APC initiative, the analysis focused on the amount that was being spent on publication fees, and compared these expenditure with data from related Austrian (FWF) and UK (Wellcome Trust, Jisc) initiatives, in terms of both size and the proportion of articles being published in fully and hybrid open access journals. We also investigated how thoroughly self-reported articles were indexed in Crossref, a DOI minting agency for scholarly literature, and analysed how the institutional spending was distributed across publishers and journal titles. According to self-reported data from 30 German universities and research organisations between 2005 and 2015, expenditures on open access publication fees increased over the years in Germany and amounted to € 9,627,537 for 7,417 open access journal articles. The average payment was € 1,298, and the median was € 1,231. A total of 94% of the total article volume included in the study was supported in accordance with the price cap of € 2,000, a limit imposed by the Deutsche Forschungsgemeinschaft (DFG) as part of its funding activities for open access funding at German universities. Expenditures varied considerably at the institutional level. There were also differences in how much the institutions spent per journal and publisher. These differences reflect, at least in part, the varying pricing schemes in place including discounted publication fees. With an indexing coverage of 99%, Crossref thoroughly indexed the open access journals articles included in the study. A comparison with the related openly available cost data from Austria and the UK revealed that German universities and research organisations primarily funded articles in fully open access journals. By contrast, articles in hybrid journal accounted for the largest share of spending according to the Austrian and UK data. Fees paid for hybrid journals were on average more expensive than those paid for fully open access journals. PMID:27602289

  15. Innovative Technology in Automotive Technology

    ERIC Educational Resources Information Center

    Gardner, John

    2007-01-01

    Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

  16. Shear-induced opening of the coronal magnetic field

    NASA Technical Reports Server (NTRS)

    Wolfson, Richard

    1995-01-01

    This work describes the evolution of a model solar corona in response to motions of the footpoints of its magnetic field. The mathematics involved is semianalytic, with the only numerical solution being that of an ordinary differential equation. This approach, while lacking the flexibility and physical details of full MHD simulations, allows for very rapid computation along with complete and rigorous exploration of the model's implications. We find that the model coronal field bulges upward, at first slowly and then more dramatically, in response to footpoint displacements. The energy in the field rises monotonically from that of the initial potential state, and the field configuration and energy appraoch asymptotically that of a fully open field. Concurrently, electric currents develop and concentrate into a current sheet as the limiting case of the open field is approached. Examination of the equations shows rigorously that in the asymptotic limit of the fully open field, the current layer becomes a true ideal MHD singularity.

  17. Medication and volume delivery by gravity-driven micro-drip intravenous infusion: potential variations during "wide-open" flow.

    PubMed

    Pierce, Eric T; Kumar, Vikram; Zheng, Hui; Peterfreund, Robert A

    2013-03-01

    Gravity-driven micro-drip infusion sets allow control of medication dose delivery by adjusting drops per minute. When the roller clamp is fully open, flow in the drip chamber can be a continuous fluid column rather than discrete, countable, drops. We hypothesized that during this "wide-open" state, drug delivery becomes dependent on factors extrinsic to the micro-drip set and is therefore difficult to predict. We conducted laboratory experiments to characterize volume delivery under various clinically relevant conditions of wide-open flow in an in vitro laboratory model. A micro-drip infusion set, plugged into a bag of normal saline, was connected to a high-flow stopcock at the distal end. Vertically oriented IV catheters (gauges 14-22) were connected to the stopcock. The fluid meniscus height in the bag was fixed (60-120 cm) above the outflow point. The roller clamp on the infusion set was in fully open position for all experiments resulting in a continuous column of fluid in the drip chamber. Fluid volume delivered in 1 minute was measured 4 times with each condition. To model resistive effects of carrier flow, volumetric infusion pumps were used to deliver various flow rates of normal saline through a carrier IV set into which a micro-drip infusion was "piggybacked." We also compared delivery by micro-drip infusion sets from 3 manufacturers. The volume of fluid delivered by gravity-driven infusion under wide-open conditions (continuous fluid column in drip chamber) varied 2.9-fold (95% confidence interval, 2.84-2.96) depending on catheter size and fluid column height. Total model resistance of the micro-drip with stopcock and catheter varied with flow rate. Volume delivered by the piggybacked micro-drip decreased up to 29.7% ± 0.8% (mean ± SE) as the carrier flow increased from 0 to 1998 mL/min. Delivery characteristics of the micro-drip infusion sets from 3 different manufacturers were similar. Laboratory simulation of clinical situations with gravity-driven micro-drip infusion sets under wide-open flow conditions revealed that infusion rate (drug and/or volume delivery) can vary widely depending on extrinsic factors including catheter size, fluid column height, and carrier flow. The variable resistance implies nonlaminar flow in the micro-drip model that cannot be easily predicted mathematically. These findings support the use of mechanical pumps instead of gravity-driven micro-drips to enhance the precision and safety of IV infusions, especially for vasoactive drugs.

  18. Edaq530: A Transparent, Open-End and Open-Source Measurement Solution in Natural Science Education

    ERIC Educational Resources Information Center

    Kopasz, Katalin; Makra, Peter; Gingl, Zoltan

    2011-01-01

    We present Edaq530, a low-cost, compact and easy-to-use digital measurement solution consisting of a thumb-sized USB-to-sensor interface and measurement software. The solution is fully open-source, our aim being to provide a viable alternative to professional solutions. Our main focus in designing Edaq530 has been versatility and transparency. In…

  19. Ring-opening of {sigma}-thienyl and {sigma}-furyl ligands at ditungsten (M=M) centers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chisholm, M.H.; Haubrich, S.T.; Huffman, J.C.

    1997-02-19

    A series of compounds of formula 1,2-M{sub 2}({sigma}-Th){sub 2}(NMe{sub 2}){sub 4}, 1,has been prepared, where M = Mo and/or W and Th = 2-thienyl[2-Th], 3-thienyl[3-Th], 5-methyl-2-thienyl[2,5-MeTh], and 2-benzothienyl[2-BTh]. Addition of {sup t}BuOH or CF{sub 3}Me{sub 2}COH to hydrocarbon solutions of 1, where M = W, lead to ring-opened products, 2, when the thienyl ligand is attached via the 2-carbon position. No ring-opening occurs for 3-thienyl derivatives. W{sub 2}(OR){sub 5}({mu}-CCH{sub 2}CHCHS)({sigma}-2-Th), 2, where one of the 2-thienyl rings has been opened, has been fully characterized and shown to be derived from a ring-opened {mu}-vinylidene intermediate W{sub 24}/(O{sup t}Bu){sub 4}({mu}-CCHCHCHS)({sigma}-2-Th). The compoundmore » W{sub 2}({sigma}-2-Fu){sub 2}(NMe{sub 2}){sub 4} was prepared and characterized (2-Fu = 2-furyl) and shown to undergo ring-opening in its reaction with {sup t}BuOH to give W{sub 2}(O{sup t}Bu){sub 5}({mu}-CCH{sub 2}CHCHO)({sigma}-2-Fu), 4, in an analogous manner to the 2-Th complex. The complexes 1 (M = W, 2-Th), 2, 3, and 4 have been characterized by single crystal X-ray studies. The results described herein are compared to other ring-opening reactions of S, N, and O organic heterocyclic compounds as models for the activation of S, N, and O containing fossil fuels in hydrodesulfurization (HDS), hydrodenitrogenation (HDN), and hydrodeoxygenation (HDO) processes. 36 refs., 7 figs., 5 tabs.« less

  20. OpenControl: a free opensource software for video tracking and automated control of behavioral mazes.

    PubMed

    Aguiar, Paulo; Mendonça, Luís; Galhardo, Vasco

    2007-10-15

    Operant animal behavioral tests require the interaction of the subject with sensors and actuators distributed in the experimental environment of the arena. In order to provide user independent reliable results and versatile control of these devices it is vital to use an automated control system. Commercial systems for control of animal mazes are usually based in software implementations that restrict their application to the proprietary hardware of the vendor. In this paper we present OpenControl: an opensource Visual Basic software that permits a Windows-based computer to function as a system to run fully automated behavioral experiments. OpenControl integrates video-tracking of the animal, definition of zones from the video signal for real-time assignment of animal position in the maze, control of the maze actuators from either hardware sensors or from the online video tracking, and recording of experimental data. Bidirectional communication with the maze hardware is achieved through the parallel-port interface, without the need for expensive AD-DA cards, while video tracking is attained using an inexpensive Firewire digital camera. OpenControl Visual Basic code is structurally general and versatile allowing it to be easily modified or extended to fulfill specific experimental protocols and custom hardware configurations. The Visual Basic environment was chosen in order to allow experimenters to easily adapt the code and expand it at their own needs.

  1. Apertured averaged scintillation of fully and partially coherent Gaussian, annular Gaussian, flat toped and dark hollow beams

    NASA Astrophysics Data System (ADS)

    Eyyuboğlu, Halil T.

    2015-03-01

    Apertured averaged scintillation requires the evaluation of rather complicated irradiance covariance function. Here we develop a much simpler numerical method based on our earlier introduced semi-analytic approach. Using this method, we calculate aperture averaged scintillation of fully and partially coherent Gaussian, annular Gaussian flat topped and dark hollow beams. For comparison, the principles of equal source beam power and normalizing the aperture averaged scintillation with respect to received power are applied. Our results indicate that for fully coherent beams, upon adjusting the aperture sizes to capture 10 and 20% of the equal source power, Gaussian beam needs the largest aperture opening, yielding the lowest aperture average scintillation, whilst the opposite occurs for annular Gaussian and dark hollow beams. When assessed on the basis of received power normalized aperture averaged scintillation, fixed propagation distance and aperture size, annular Gaussian and dark hollow beams seem to have the lowest scintillation. Just like the case of point-like scintillation, partially coherent beams will offer less aperture averaged scintillation in comparison to fully coherent beams. But this performance improvement relies on larger aperture openings. Upon normalizing the aperture averaged scintillation with respect to received power, fully coherent beams become more advantageous than partially coherent ones.

  2. Controlling resonance energy transfer in nanostructure emitters by positioning near a mirror

    NASA Astrophysics Data System (ADS)

    Weeraddana, Dilusha; Premaratne, Malin; Gunapala, Sarath D.; Andrews, David L.

    2017-08-01

    The ability to control light-matter interactions in quantum objects opens up many avenues for new applications. We look at this issue within a fully quantized framework using a fundamental theory to describe mirror-assisted resonance energy transfer (RET) in nanostructures. The process of RET communicates electronic excitation between suitably disposed donor and acceptor particles in close proximity, activated by the initial excitation of the donor. Here, we demonstrate that the energy transfer rate can be significantly controlled by careful positioning of the RET emitters near a mirror. The results deliver equations that elicit new insights into the associated modification of virtual photon behavior, based on the quantum nature of light. In particular, our results indicate that energy transfer efficiency in nanostructures can be explicitly expedited or suppressed by a suitably positioned neighboring mirror, depending on the relative spacing and the dimensionality of the nanostructure. Interestingly, the resonance energy transfer between emitters is observed to "switch off" abruptly under suitable conditions of the RET system. This allows one to quantitatively control RET systems in a new way.

  3. Topics in Bioethics: A Development of Student Perspectives†

    PubMed Central

    Johnson, Keith A.

    2014-01-01

    Exposing students to current biotechnological and medical issues is eye-opening for many students in a way that is not always achieved through lecture-based learning. Lecture or investigative teaching styles provide a tremendous knowledge base for the students, but sometimes these teaching styles do not allow the student to fully develop, especially personal attitudes to issues in bioethics. Through online videos, Hollywood movies, guided readings and classroom discussions, students in this course are informed of some bioethical topics, encouraged to learn about other topics, and use this gained knowledge to develop personal positions regarding the value and/or risk of the issues. This course has been well-received by previous students as a favorite in terms of both topics covered and style. PMID:25574290

  4. Outcomes of Chat and Discussion Board Use in Online Learning: A Research Synthesis

    ERIC Educational Resources Information Center

    Blackmon, Stephanie J.

    2012-01-01

    Online discussion boards are often used in traditional courses, hybrid courses, and fully online courses. Online chats and discussions can be particularly useful in fully online courses, as these communication connections are often students' only means of connecting with each other and sharing ideas in an open forum. While traditional face-to-face…

  5. Causal localizations in relativistic quantum mechanics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Castrigiano, Domenico P. L., E-mail: castrig@ma.tum.de; Leiseifer, Andreas D., E-mail: andreas.leiseifer@tum.de

    2015-07-15

    Causal localizations describe the position of quantum systems moving not faster than light. They are constructed for the systems with finite spinor dimension. At the center of interest are the massive relativistic systems. For every positive mass, there is the sequence of Dirac tensor-localizations, which provides a complete set of inequivalent irreducible causal localizations. They obey the principle of special relativity and are fully Poincaré covariant. The boosters are determined by the causal position operator and the other Poincaré generators. The localization with minimal spinor dimension is the Dirac localization. Thus, the Dirac equation is derived here as a meremore » consequence of the principle of causality. Moreover, the higher tensor-localizations, not known so far, follow from Dirac’s localization by a simple construction. The probability of localization for positive energy states results to be described by causal positive operator valued (PO-) localizations, which are the traces of the causal localizations on the subspaces of positive energy. These causal Poincaré covariant PO-localizations for every irreducible massive relativistic system were, all the more, not known before. They are shown to be separated. Hence, the positive energy systems can be localized within every open region by a suitable preparation as accurately as desired. Finally, the attempt is made to provide an interpretation of the PO-localization operators within the frame of conventional quantum mechanics attributing an important role to the negative energy states.« less

  6. Causal localizations in relativistic quantum mechanics

    NASA Astrophysics Data System (ADS)

    Castrigiano, Domenico P. L.; Leiseifer, Andreas D.

    2015-07-01

    Causal localizations describe the position of quantum systems moving not faster than light. They are constructed for the systems with finite spinor dimension. At the center of interest are the massive relativistic systems. For every positive mass, there is the sequence of Dirac tensor-localizations, which provides a complete set of inequivalent irreducible causal localizations. They obey the principle of special relativity and are fully Poincaré covariant. The boosters are determined by the causal position operator and the other Poincaré generators. The localization with minimal spinor dimension is the Dirac localization. Thus, the Dirac equation is derived here as a mere consequence of the principle of causality. Moreover, the higher tensor-localizations, not known so far, follow from Dirac's localization by a simple construction. The probability of localization for positive energy states results to be described by causal positive operator valued (PO-) localizations, which are the traces of the causal localizations on the subspaces of positive energy. These causal Poincaré covariant PO-localizations for every irreducible massive relativistic system were, all the more, not known before. They are shown to be separated. Hence, the positive energy systems can be localized within every open region by a suitable preparation as accurately as desired. Finally, the attempt is made to provide an interpretation of the PO-localization operators within the frame of conventional quantum mechanics attributing an important role to the negative energy states.

  7. Hidden Markov analysis of mechanosensitive ion channel gating.

    PubMed

    Khan, R Nazim; Martinac, Boris; Madsen, Barry W; Milne, Robin K; Yeo, Geoffrey F; Edeson, Robert O

    2005-02-01

    Patch clamp data from the large conductance mechanosensitive channel (MscL) in E. coli was studied with the aim of developing a strategy for statistical analysis based on hidden Markov models (HMMs) and determining the number of conductance levels of the channel, together with mean current, mean dwell time and equilibrium probability of occupancy for each level. The models incorporated state-dependent white noise and moving average adjustment for filtering, with maximum likelihood parameter estimates obtained using an EM (expectation-maximisation) based iteration. Adjustment for filtering was included as it could be expected that the electronic filter used in recording would have a major effect on obviously brief intermediate conductance level sojourns. Preliminary data analysis revealed that the brevity of intermediate level sojourns caused difficulties in assignment of data points to levels as a result of over-estimation of noise variances. When reasonable constraints were placed on these variances using the better determined noise variances for the closed and fully open levels, idealisation anomalies were eliminated. Nevertheless, simulations suggested that mean sojourn times for the intermediate levels were still considerably over-estimated, and that recording bandwidth was a major limitation; improved results were obtained with higher bandwidth data (10 kHz sampled at 25 kHz). The simplest model consistent with these data had four open conductance levels, intermediate levels being approximately 20%, 51% and 74% of fully open. The mean lifetime at the fully open level was about 1 ms; estimates for the three intermediate levels were 54-92 micros, probably still over-estimates.

  8. An Open-Source Automated Peptide Synthesizer Based on Arduino and Python.

    PubMed

    Gali, Hariprasad

    2017-10-01

    The development of the first open-source automated peptide synthesizer, PepSy, using Arduino UNO and readily available components is reported. PepSy was primarily designed to synthesize small peptides in a relatively small scale (<100 µmol). Scripts to operate PepSy in a fully automatic or manual mode were written in Python. Fully automatic script includes functions to carry out resin swelling, resin washing, single coupling, double coupling, Fmoc deprotection, ivDde deprotection, on-resin oxidation, end capping, and amino acid/reagent line cleaning. Several small peptides and peptide conjugates were successfully synthesized on PepSy with reasonably good yields and purity depending on the complexity of the peptide.

  9. Comparative Analysis of Flower Volatiles from Nine Citrus at Three Blooming Stages

    PubMed Central

    Azam, Muhammad; Song, Min; Fan, Fangjuan; Zhang, Bo; Xu, Yaying; Xu, Changjie; Chen, Kunsong

    2013-01-01

    Volatiles from flowers at three blooming stages of nine citrus cultivars were analyzed by headspace-solid phase microextraction (HS-SPME)-GC-MS. Up to 110 volatiles were detected, with 42 tentatively identified from citrus flowers for the first time. Highest amounts of volatiles were present in fully opened flowers of most citrus, except for pomelos. All cultivars were characterized by a high percentage of either oxygenated monoterpenes or monoterpene hydrocarbons, and the presence of a high percentage of nitrogen containing compounds was also observed. Flower volatiles varied qualitatively and quantitatively among citrus types during blooming. Limonene was the most abundant flower volatile only in citrons; α-citral and β-citral ranked 2nd and 3rd only for Bergamot, and unopened flowers of Ponkan had a higher amount of linalool and β-pinene while much lower amount of γ-terpinene and p-cymene than Satsuma. Taking the average of all cultivars, linalool and limonene were the top two volatiles for all blooming stages; β-pinene ranked 3rd in unopened flowers, while indole ranked 3rd for half opened and fully opened flower volatiles. As flowers bloomed, methyl anthranilate increased while 2-hexenal and p-cymene decreased. In some cases, a volatile could be high in both unopened and fully opened flowers but low in half opened ones. Through multivariate analysis, the nine citrus cultivars were clustered into three groups, consistent with the three true citrus types. Furthermore, an influence of blooming stages on clustering was observed, especially with hybrids Satsuma and Huyou. Altogether, it was suggested that flower volatiles can be suitable markers for revealing the genetic relationships between citrus cultivars but the same blooming stage needs to be strictly controlled. PMID:24232454

  10. Comparative analysis of flower volatiles from nine citrus at three blooming stages.

    PubMed

    Azam, Muhammad; Song, Min; Fan, Fangjuan; Zhang, Bo; Xu, Yaying; Xu, Changjie; Chen, Kunsong

    2013-11-13

    Volatiles from flowers at three blooming stages of nine citrus cultivars were analyzed by headspace-solid phase microextraction (HS-SPME)-GC-MS. Up to 110 volatiles were detected, with 42 tentatively identified from citrus flowers for the first time. Highest amounts of volatiles were present in fully opened flowers of most citrus, except for pomelos. All cultivars were characterized by a high percentage of either oxygenated monoterpenes or monoterpene hydrocarbons, and the presence of a high percentage of nitrogen containing compounds was also observed. Flower volatiles varied qualitatively and quantitatively among citrus types during blooming. Limonene was the most abundant flower volatile only in citrons; α-citral and β-citral ranked 2nd and 3rd only for Bergamot, and unopened flowers of Ponkan had a higher amount of linalool and β-pinene while much lower amount of γ-terpinene and p-cymene than Satsuma. Taking the average of all cultivars, linalool and limonene were the top two volatiles for all blooming stages; β-pinene ranked 3rd in unopened flowers, while indole ranked 3rd for half opened and fully opened flower volatiles. As flowers bloomed, methyl anthranilate increased while 2-hexenal and p-cymene decreased. In some cases, a volatile could be high in both unopened and fully opened flowers but low in half opened ones. Through multivariate analysis, the nine citrus cultivars were clustered into three groups, consistent with the three true citrus types. Furthermore, an influence of blooming stages on clustering was observed, especially with hybrids Satsuma and Huyou. Altogether, it was suggested that flower volatiles can be suitable markers for revealing the genetic relationships between citrus cultivars but the same blooming stage needs to be strictly controlled.

  11. Open Source and Design Thinking at NASA: A Vision for Future Software

    NASA Technical Reports Server (NTRS)

    Trimble, Jay

    2017-01-01

    NASA Mission Control Software for the Visualization of data has historically been closed, accessible only to small groups of flight controllers, often bound to a specific mission discipline such as flight dynamics, health and status or mission planning. Open Mission Control Technologies (MCT) provides new capability for NASA mission controllers and, by being fully open source, opens up NASA software for the visualization of mission data to broader communities inside and outside of NASA. Open MCT is the product of a design thinking process within NASA, using participatory design and design sprints to build a product that serves users.

  12. Experimental evaluation of wall Mach number distributions of the octagonal test section proposed for NASA Lewis Research Center's altitude wind tunnel

    NASA Technical Reports Server (NTRS)

    Harrington, Douglas E.; Burley, Richard R.; Corban, Robert R.

    1986-01-01

    Wall Mach number distributions were determined over a range of test-section free-stream Mach numbers from 0.2 to 0.92. The test section was slotted and had a nominal porosity of 11 percent. Reentry flaps located at the test-section exit were varied from 0 (fully closed) to 9 (fully open) degrees. Flow was bled through the test-section slots by means of a plenum evacuation system (PES) and varied from 0 to 3 percent of tunnel flow. Variations in reentry flap angle or PES flow rate had little or no effect on the Mach number distributions in the first 70 percent of the test section. However, in the aft region of the test section, flap angle and PES flow rate had a major impact on the Mach number distributions. Optimum PES flow rates were nominally 2 to 2.5 percent wtih the flaps fully closed and less than 1 percent when the flaps were fully open. The standard deviation of the test-section wall Mach numbers at the optimum PES flow rates was 0.003 or less.

  13. Thickening the Global SOF Network

    DTIC Science & Technology

    2013-12-01

    in thought, and regulate both positive and negative emotions in oneself and others. EI is a necessary, but not fully sufficient, quality Green...assimilate emotions in thought, and regulate both positive and negative emotions in oneself and others. EI is a necessary, but not fully sufficient...both positive and negative emotions in oneself and others. B. THE HISTORY AND CONTROVERSY SURROUNDING EMOTIONAL INTELLIGENCE Since its first

  14. mLearning and Creative Practices: A Public Challenge?

    ERIC Educational Resources Information Center

    Antonczak, Laurent; Keegan, Helen; Cochrane, Thomas

    2016-01-01

    The ethos of open sharing of experiences and user generated content enabled by Mobile social media can be problematic in some cases (politics, gender, minorities), and it is not fully understood within the creative and academic sector. Creative people, students, and lecturers can misconceive the value and issues around open and public access to…

  15. Transcription activation by NtcA and 2-oxoglutarate of three genes involved in heterocyst differentiation in the cyanobacterium Anabaena sp. strain PCC 7120.

    PubMed

    Valladares, Ana; Flores, Enrique; Herrero, Antonia

    2008-09-01

    In Anabaena sp. strain PCC 7120, differentiation of heterocysts takes place in response to the external cue of combined nitrogen deprivation, allowing the organism to fix atmospheric nitrogen in oxic environments. NtcA, a global transcriptional regulator of cyanobacteria, is required for activation of the expression of multiple genes involved in heterocyst differentiation, including key regulators that are specific to the process. We have set up a fully defined in vitro system, which includes the purified Anabaena RNA polymerase, and have studied the effects of NtcA and its signaling effector 2-oxoglutarate on RNA polymerase binding, open complex formation, and transcript production from promoters of the hetC, nrrA, and devB genes that are activated by NtcA at different stages of heterocyst differentiation. Both RNA polymerase and NtcA could specifically bind to the target DNA in the absence of any effector. 2-Oxoglutarate had a moderate positive effect on NtcA binding, and NtcA had a limited positive effect on RNA polymerase recruitment at the promoters. However, a stringent requirement of both NtcA and 2-oxoglutarate was observed for the detection of open complexes and transcript production at the three investigated promoters. These results support a key role for 2-oxoglutarate in transcription activation in the developing heterocyst.

  16. Fast-Acting Valve

    NASA Technical Reports Server (NTRS)

    Wojciechowski, Bogdan V. (Inventor); Pegg, Robert J. (Inventor)

    2003-01-01

    A fast-acting valve includes an annular valve seat that defines an annular valve orifice between the edges of the annular valve seat, an annular valve plug sized to cover the valve orifice when the valve is closed, and a valve-plug holder for moving the annular valve plug on and off the annular valve seat. The use of an annular orifice reduces the characteristic distance between the edges of the valve seat. Rather than this distance being equal to the diameter of the orifice, as it is for a conventional circular orifice, the characteristic distance equals the distance between the inner and outer radii (for a circular annulus). The reduced characteristic distance greatly reduces the gap required between the annular valve plug and the annular valve seat for the valve to be fully open, thereby greatly reducing the required stroke and corresponding speed and acceleration of the annular valve plug. The use of a valve-plug holder that is under independent control to move the annular valve plug between its open and closed positions is important for achieving controllable fast operation of the valve.

  17. Design Environment for Multifidelity and Multidisciplinary Components

    NASA Technical Reports Server (NTRS)

    Platt, Michael

    2014-01-01

    One of the greatest challenges when developing propulsion systems is predicting the interacting effects between the fluid loads, thermal loads, and structural deflection. The interactions between technical disciplines often are not fully analyzed, and the analysis in one discipline often uses a simplified representation of other disciplines as an input or boundary condition. For example, the fluid forces in an engine generate static and dynamic rotor deflection, but the forces themselves are dependent on the rotor position and its orbit. It is important to consider the interaction between the physical phenomena where the outcome of each analysis is heavily dependent on the inputs (e.g., changes in flow due to deflection, changes in deflection due to fluid forces). A rigid design process also lacks the flexibility to employ multiple levels of fidelity in the analysis of each of the components. This project developed and validated an innovative design environment that has the flexibility to simultaneously analyze multiple disciplines and multiple components with multiple levels of model fidelity. Using NASA's open-source multidisciplinary design analysis and optimization (OpenMDAO) framework, this multifaceted system will provide substantially superior capabilities to current design tools.

  18. An Effective Construction Method of Modular Manipulator 3D Virtual Simulation Platform

    NASA Astrophysics Data System (ADS)

    Li, Xianhua; Lv, Lei; Sheng, Rui; Sun, Qing; Zhang, Leigang

    2018-06-01

    This work discusses about a fast and efficient method of constructing an open 3D manipulator virtual simulation platform which make it easier for teachers and students to learn about positive and inverse kinematics of a robot manipulator. The method was carried out using MATLAB. In which, the Robotics Toolbox, MATLAB GUI and 3D animation with the help of modelling using SolidWorks, were fully applied to produce a good visualization of the system. The advantages of using quickly build is its powerful function of the input and output and its ability to simulate a 3D manipulator realistically. In this article, a Schunk six DOF modular manipulator was constructed by the author's research group to be used as example. The implementation steps of this method was detailed described, and thereafter, a high-level open and realistic visualization manipulator 3D virtual simulation platform was achieved. With the graphs obtained from simulation, the test results show that the manipulator 3D virtual simulation platform can be constructed quickly with good usability and high maneuverability, and it can meet the needs of scientific research and teaching.

  19. Wind-sea surface temperature-sea ice relationship in the Chukchi-Beaufort Seas during autumn

    NASA Astrophysics Data System (ADS)

    Zhang, Jing; Stegall, Steve T.; Zhang, Xiangdong

    2018-03-01

    Dramatic climate changes, especially the largest sea ice retreat during September and October, in the Chukchi-Beaufort Seas could be a consequence of, and further enhance, complex air-ice-sea interactions. To detect these interaction signals, statistical relationships between surface wind speed, sea surface temperature (SST), and sea ice concentration (SIC) were analyzed. The results show a negative correlation between wind speed and SIC. The relationships between wind speed and SST are complicated by the presence of sea ice, with a negative correlation over open water but a positive correlation in sea ice dominated areas. The examination of spatial structures indicates that wind speed tends to increase when approaching the ice edge from open water and the area fully covered by sea ice. The anomalous downward radiation and thermal advection, as well as their regional distribution, play important roles in shaping these relationships, though wind-driven sub-grid scale boundary layer processes may also have contributions. Considering the feedback loop involved in the wind-SST-SIC relationships, climate model experiments would be required to further untangle the underlying complex physical processes.

  20. An Anomalous Composition in Slow Solar Wind as a Signature of Magnetic Reconnection in its Source Region

    NASA Astrophysics Data System (ADS)

    Zhao, L.; Landi, E.; Lepri, S. T.; Kocher, M.; Zurbuchen, T. H.; Fisk, L. A.; Raines, J. M.

    2017-01-01

    In this paper, we study a subset of slow solar winds characterized by an anomalous charge state composition and ion temperatures compared to average solar wind distributions, and thus referred to as an “Outlier” wind. We find that although this wind is slower and denser than normal slow wind, it is accelerated from the same source regions (active regions and quiet-Sun regions) as the latter and its occurrence rate depends on the solar cycle. The defining property of the Outlier wind is that its charge state composition is the same as that of normal slow wind, with the only exception being a very large decrease in the abundance of fully charged species (He2+, C6+, N7+, O8+, Mg12+), resulting in a significant depletion of the He and C element abundances. Based on these observations, we suggest three possible scenarios for the origin of this wind: (1) local magnetic waves preferentially accelerating non-fully stripped ions over fully stripped ions from a loop opened by reconnection; (2) depleted fully stripped ions already contained in the corona magnetic loops before they are opened up by reconnection; or (3) fully stripped ions depleted by Coulomb collision after magnetic reconnection in the solar corona. If any one of these three scenarios is confirmed, the Outlier wind represents a direct signature of slow wind release through magnetic reconnection.

  1. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhao, L.; Landi, E.; Lepri, S. T.

    In this paper, we study a subset of slow solar winds characterized by an anomalous charge state composition and ion temperatures compared to average solar wind distributions, and thus referred to as an “Outlier” wind. We find that although this wind is slower and denser than normal slow wind, it is accelerated from the same source regions (active regions and quiet-Sun regions) as the latter and its occurrence rate depends on the solar cycle. The defining property of the Outlier wind is that its charge state composition is the same as that of normal slow wind, with the only exceptionmore » being a very large decrease in the abundance of fully charged species (He{sup 2+}, C{sup 6+}, N{sup 7+}, O{sup 8+}, Mg{sup 12+}), resulting in a significant depletion of the He and C element abundances. Based on these observations, we suggest three possible scenarios for the origin of this wind: (1) local magnetic waves preferentially accelerating non-fully stripped ions over fully stripped ions from a loop opened by reconnection; (2) depleted fully stripped ions already contained in the corona magnetic loops before they are opened up by reconnection; or (3) fully stripped ions depleted by Coulomb collision after magnetic reconnection in the solar corona. If any one of these three scenarios is confirmed, the Outlier wind represents a direct signature of slow wind release through magnetic reconnection.« less

  2. Application of the Institution of Exclusive Rights in the Field of Science

    NASA Astrophysics Data System (ADS)

    Yakovlev, D.; Yushkov, E.; Zanardo, A.; Bogatyreova, M.

    2017-01-01

    The problem of legal protection of scientific research results is of growing interest nowadays. However, none of the three hitherto existing rights (the right for trade secrets, patent and copyright) is able to fully take into account the characteristics of scientific activities. In Russia, the problem of legal protection of scientific research results has been developed actively since the 50-ies of the last century, in connection with the introduction of the system of state registration of scientific discoveries. A further concept allowed for not only the registration of discoveries, but also the entire array of scientific results. However, theoretical applicability of exclusive rights institutions in the sphere of science remained unstudied. The article describes a new system, which is not fixed in legislation and remains unnoticed by the vast majority of researchers. That is the institution of scientific and positional rights, focused on the recognition procedure of authorship, priority, and other characteristics of intellectual scientific results value. In case of complex intellectual results, comprising scientific results, the recognition of result-oriented exclusive rights proves to be unsustainable. This circumstance urges us to foreground the institution of scientific and positional exclusive rights. Its scope is budget science where non-fee published scientific results are generated. Any exclusive right to use open scientific results is out of the question. The sphere of open (budget) science is dominated by scientific and positional exclusive rights, sanctioned both by the state (S-sanctioned), the bodies of the scientific community (BSC-sanctioned) and scientific community (SC-sanctioned) rights.

  3. Opening and Closing of Oxalis Leaves in Response to Light Stimuli

    ERIC Educational Resources Information Center

    Nakanishi, Fumi; Nakazawa, Masami; Katayama, Nobuyasu

    2005-01-01

    Fully opened leaves of potted plants of "Oxalis corymbosa" DC. closed completely by folding their leaflets downward after being kept in the dark for two hours. The folded leaflets, then moved upward gradually after exposure to light. We developed a simple method to measure the leaf movement. A paper protractor folded every 10[degrees] was devised…

  4. Recommendations for open data science.

    PubMed

    Gymrek, Melissa; Farjoun, Yossi

    2016-01-01

    Life science research increasingly relies on large-scale computational analyses. However, the code and data used for these analyses are often lacking in publications. To maximize scientific impact, reproducibility, and reuse, it is crucial that these resources are made publicly available and are fully transparent. We provide recommendations for improving the openness of data-driven studies in life sciences.

  5. "Caritas" in the Classroom: The Opening of the American Student's Heart.

    ERIC Educational Resources Information Center

    Lawry, John D.

    1990-01-01

    The quality of the student-teacher relationship is critical in opening the heart and mind. The highest form of learning occurs when the teacher loves and accepts the student so fully that the student feels safe enough to go within to see himself/herself and emerge with new answers about his/her life. (MSE)

  6. Learning and Open Educational Resources: A Psychological Perspective

    ERIC Educational Resources Information Center

    Terras, Melody M.; Ramsay, Judith; Boyle, Elizabeth

    2013-01-01

    The provision of Open Educational Resources (OER) means that learning horizons are no longer restricted by time and space. However, if the learning potential of OER is to be fully realised, educators and students must have the media literacy skills to select, use and produce information in a judicious and useful way. A consideration of the…

  7. Symmetry breaking in linear multipole traps

    NASA Astrophysics Data System (ADS)

    Pedregosa-Gutierrez, J.; Champenois, C.; Kamsap, M. R.; Hagel, G.; Houssin, M.; Knoop, M.

    2018-03-01

    Radiofrequency multipole traps have been used for some decades in cold collision experiments and are gaining interest for precision spectroscopy due to their low micromotion contribution and the predicted unusual cold-ion structures. However, the experimental realisation is not yet fully controlled, and open questions in the operation of these devices remain. We present experimental observations of symmetry breaking of the trapping potential in a macroscopic octupole trap with laser-cooled ions. Numerical simulations have been performed in order to explain the appearance of additional local potential minima and be able to control them in a next step. We characterise these additional potential minima, in particular with respect to their position, their potential depth and their probability of population as a function of the radial and angular displacement of the trapping rods.

  8. Method and system for nanoscale plasma processing of objects

    DOEpatents

    Oehrlein, Gottlieb S [Clarksville, MD; Hua, Xuefeng [Hyattsville, MD; Stolz, Christian [Baden-Wuerttemberg, DE

    2008-12-30

    A plasma processing system includes a source of plasma, a substrate and a shutter positioned in close proximity to the substrate. The substrate/shutter relative disposition is changed for precise control of substrate/plasma interaction. This way, the substrate interacts only with a fully established, stable plasma for short times required for nanoscale processing of materials. The shutter includes an opening of a predetermined width, and preferably is patterned to form an array of slits with dimensions that are smaller than the Debye screening length. This enables control of the substrate/plasma interaction time while avoiding the ion bombardment of the substrate in an undesirable fashion. The relative disposition between the shutter and the substrate can be made either by moving the shutter or by moving the substrate.

  9. Energy and Raw Materials in the Selection of Technologies for Iron and Steel

    NASA Astrophysics Data System (ADS)

    Fortini, Otavio Macedo

    2016-09-01

    This paper discusses the selection of metal extraction technologies according to the regional availability of energy resources. The most important energy sources in iron and steel production are determined from a review of current technologies to inform possible future scenarios of capacity replacement or expansion according to geography. Alternative technologies are not discussed, considering that actual investment in capacity is most often dominated by high degrees of risk aversion. As such, only technologies proven at a reasonable scale are included in the selection matrix. Scenarios of capacity choice are defined in terms of actions from external agents, those which are not directly involved in the industry but have the capacity to regulate actions by metal producing players. Two extreme scenarios corresponding to closed and open economies are used to set bounds for future expectations. Among steelmaking processes under fully open trade conditions, it is found that EAF steelmaking with charge pre-heat should be the technology of choice in all regions of the world except for South America and Europe, where Integrated Steel Mills have a cost advantage. In fully closed exchange scenarios, Integrated Steel Mills would be the prevalent technology in South America, Sub-Saharan Africa, India, and the former USSR, EAF with scrap pre-heating prevailing in all other regions. On the other hand, HYL-ZR would be the iron making technology of choice in all regions under full exchange scenarios. Under fully closed exchange conditions, Mini-Blast Furnaces, COREX, and HYL-ZR would find regional applications. Increases in raw materials and energy costs of 38 pct in steelmaking and 63 pct in ironmaking are found in going from fully open to fully closed exchange regimes. It is also found that Southeast Asia is the most suitable region for deploying new steelmaking capacity, while Australia and Russia are the best selection for new iron making capacity.

  10. Temperature rise and Heat build up inside a parked Car

    NASA Astrophysics Data System (ADS)

    Coady, Rose; Maheswaranathan, Ponn

    2001-11-01

    We have studied the heat build up inside a parked car under the hot summer Sun. Inside and outside temperatures were monitored every ten seconds from 9 AM to about 4 PM for a 2000 Toyota Camry parked in a Winthrop University parking lot without any shades or trees. Two PASCO temperature sensors, one inside the car and the other outside the car, are used along with PASCO-750 interface to collect the data. Data were collected under the following conditions while keeping track of the outside weather: fully closed windows, slightly open windows, half way open windows, fully open windows, and with window shades inside and outside. Inside temperatures reached as high as 150 degrees Fahrenheit on a sunny day with outside high temperature of about 100 degrees Fahrenheit. These results will be presented along with results from car cover and window tint manufacturers and suggestions to keep your car cool next time you park it under the Sun.

  11. SimVascular: An Open Source Pipeline for Cardiovascular Simulation.

    PubMed

    Updegrove, Adam; Wilson, Nathan M; Merkow, Jameson; Lan, Hongzhi; Marsden, Alison L; Shadden, Shawn C

    2017-03-01

    Patient-specific cardiovascular simulation has become a paradigm in cardiovascular research and is emerging as a powerful tool in basic, translational and clinical research. In this paper we discuss the recent development of a fully open-source SimVascular software package, which provides a complete pipeline from medical image data segmentation to patient-specific blood flow simulation and analysis. This package serves as a research tool for cardiovascular modeling and simulation, and has contributed to numerous advances in personalized medicine, surgical planning and medical device design. The SimVascular software has recently been refactored and expanded to enhance functionality, usability, efficiency and accuracy of image-based patient-specific modeling tools. Moreover, SimVascular previously required several licensed components that hindered new user adoption and code management and our recent developments have replaced these commercial components to create a fully open source pipeline. These developments foster advances in cardiovascular modeling research, increased collaboration, standardization of methods, and a growing developer community.

  12. A configurable electronics system for the ESS-Bilbao beam position monitors

    NASA Astrophysics Data System (ADS)

    Muguira, L.; Belver, D.; Etxebarria, V.; Varnasseri, S.; Arredondo, I.; del Campo, M.; Echevarria, P.; Garmendia, N.; Feuchtwanger, J.; Jugo, J.; Portilla, J.

    2013-09-01

    A versatile and configurable system has been developed in order to monitorize the beam position and to meet all the requirements of the future ESS-Bilbao Linac. At the same time the design has been conceived to be open and configurable so that it could eventually be used in different kinds of accelerators, independent of the charged particle, with minimal change. The design of the Beam Position Monitors (BPMs) system includes a test bench both for button-type pick-ups (PU) and striplines (SL), the electronic units and the control system. The electronic units consist of two main parts. The first part is an Analog Front-End (AFE) unit where the RF signals are filtered, conditioned and converted to base-band. The second part is a Digital Front-End (DFE) unit which is based on an FPGA board where the base-band signals are sampled in order to calculate the beam position, the amplitude and the phase. To manage the system a Multipurpose Controller (MC) developed at ESSB has been used. It includes the FPGA management, the EPICS integration and Archiver Instances. A description of the system and a comparison between the performance of both PU and SL BPM designs measured with this electronics system are fully described and discussed.

  13. The free energies of partially open coronal magnetic fields

    NASA Technical Reports Server (NTRS)

    Low, B. C.; Smith, D. F.

    1993-01-01

    A simple model of the low corona is examined in terms of a static polytropic atmosphere in equilibrium with a global magnetic field. The question posed is whether magnetostatic states with partially open magnetic fields may contain magnetic energies in excess of those in fully open magnetic fields. Based on the analysis presented here, it is concluded that the cross-field electric currents in the pre-eruption corona are a viable source of the bulk of the energies in a mass ejection and its associated flare.

  14. MetAMOS: a modular and open source metagenomic assembly and analysis pipeline

    PubMed Central

    2013-01-01

    We describe MetAMOS, an open source and modular metagenomic assembly and analysis pipeline. MetAMOS represents an important step towards fully automated metagenomic analysis, starting with next-generation sequencing reads and producing genomic scaffolds, open-reading frames and taxonomic or functional annotations. MetAMOS can aid in reducing assembly errors, commonly encountered when assembling metagenomic samples, and improves taxonomic assignment accuracy while also reducing computational cost. MetAMOS can be downloaded from: https://github.com/treangen/MetAMOS. PMID:23320958

  15. Crystallography Open Databases and Preservation: a World-wide Initiative

    NASA Astrophysics Data System (ADS)

    Chateigner, Daniel

    In 2003, an international team of crystallographers proposed the Crystallography Open Database (COD), a fully-free collection of crystal structure data, in the aim of ensuring their preservation. With nearly 250000 entries, this database represents a large open set of data for crystallographers, academics and industrials, located at five different places world-wide, and included in Thomson-Reuters’ ISI. As a large step towards data preservation, raw data can now be uploaded along with «digested» structure files, and COD can be questioned by most of the crystallography-linked industrial software. The COD initiative work deserves several other open developments.

  16. Maximum crown area equation for open-grown bur oak

    Treesearch

    M.C. Demchik; S.M. Virden; Z.L. Buchanan; A.M. Johnson

    2017-01-01

    Bur oak (Quercus macrocarpa Michx.) is a classic savanna species with a range that covers much of the eastern United States. Because savannas are an endangered habitat in North America, significant restoration efforts are in progress across much of the range of bur oak. For open sites being planted with bur oaks as well as fully stocked sites that...

  17. KENNEDY SPACE CENTER, FLA. - A worker in the Orbiter Processing Facility checks the open hatch of the airlock in Discovery’s payload bay. The airlock is normally located inside the middeck of the spacecraft’s pressurized crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. Support functions include airlock depressurization and repressurization, extravehicular activity equipment recharge, liquid-cooled garment water cooling, EVA equipment checkout, donning and communications. The outer hatch isolates the airlock from the unpressurized payload bay when closed and permits the EVA crew members to exit from the airlock to the payload bay when open.

    NASA Image and Video Library

    2004-01-22

    KENNEDY SPACE CENTER, FLA. - A worker in the Orbiter Processing Facility checks the open hatch of the airlock in Discovery’s payload bay. The airlock is normally located inside the middeck of the spacecraft’s pressurized crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. Support functions include airlock depressurization and repressurization, extravehicular activity equipment recharge, liquid-cooled garment water cooling, EVA equipment checkout, donning and communications. The outer hatch isolates the airlock from the unpressurized payload bay when closed and permits the EVA crew members to exit from the airlock to the payload bay when open.

  18. The relationship between school multiculturalism and interpersonal violence: an exploratory study.

    PubMed

    Le, Thao N; Johansen, Samantha

    2011-11-01

    Multiculturalism has been purported to be supportive of positive youth development and outcomes. This study examined the relationship between perceived school multiculturalism-whether youth felt and thought that their school and teachers supported and provided activities for diverse intergroup interactions-and serious interpersonal violence, and explored whether this relation was mediated by civic engagement, ethnic identity, ethnocultural empathy, and positive peers. An ethnically diverse sample of 324 middle-school youth (mean age: 12.5 years; range: 11-15 years; sex: 50% female) from a city in northern California participated in the study. Analyses consisted of structural equation modeling with bootstrapping. The results revealed a negative association between school multiculturalism and interpersonal violence that was fully mediated by positive peers and civic engagement. Although school multiculturalism was positively associated with ethnic identity, ethnic identity, in turn, was not significantly associated with interpersonal violence. School multiculturalism is an important protective factor against youth violence by facilitating positive peer relationships and community engagement among youth. Teachers, administrators, and health officials need to consider the ways in which they can facilitate and encourage greater understanding, openness, and respect for diversity, and promote harmonious interactions among different groups at schools. Greater institutional support for school multiculturalism through implementation of tolerance curriculum and activities, for example, could in turn facilitate favorable youth outcomes. © 2011, American School Health Association.

  19. Position coding effects in a 2D scenario: the case of musical notation.

    PubMed

    Perea, Manuel; García-Chamorro, Cristina; Centelles, Arnau; Jiménez, María

    2013-07-01

    How does the cognitive system encode the location of objects in a visual scene? In the past decade, this question has attracted much attention in the field of visual-word recognition (e.g., "jugde" is perceptually very close to "judge"). Letter transposition effects have been explained in terms of perceptual uncertainty or shared "open bigrams". In the present study, we focus on note position coding in music reading (i.e., a 2D scenario). The usual way to display music is the staff (i.e., a set of 5 horizontal lines and their resultant 4 spaces). When reading musical notation, it is critical to identify not only each note (temporal duration), but also its pitch (y-axis) and its temporal sequence (x-axis). To examine note position coding, we employed a same-different task in which two briefly and consecutively presented staves contained four notes. The experiment was conducted with experts (musicians) and non-experts (non-musicians). For the "different" trials, the critical conditions involved staves in which two internal notes that were switched vertically, horizontally, or fully transposed--as well as the appropriate control conditions. Results revealed that note position coding was only approximate at the early stages of processing and that this encoding process was modulated by expertise. We examine the implications of these findings for models of object position encoding. Copyright © 2013 Elsevier B.V. All rights reserved.

  20. Sirolimus

    MedlinePlus

    ... the solution bottle. On first use, insert the plastic tube with stopper tightly into the bottle until ... fully pushed in, into the opening in the plastic tube. Draw up the amount of solution your ...

  1. Strategic Use of Microscrews for Enhancing the Accuracy of Computer-Guided Implant Surgery in Fully Edentulous Arches: A Case History Report.

    PubMed

    Lee, Du-Hyeong

    Implant guide systems can be classified by their supporting structure as tooth-, mucosa-, or bone-supported. Mucosa-supported guides for fully edentulous arches show lower accuracy in implant placement because of errors in image registration and guide positioning. This article introduces the application of a novel microscrew system for computer-aided implant surgery. This technique can markedly improve the accuracy of computer-guided implant surgery in fully edentulous arches by eliminating errors from image fusion and guide positioning.

  2. Cleft closure and undersizing annuloplasty improve mitral repair in atrioventricular canal defects

    PubMed Central

    Padala, Muralidhar; Vasilyev, Nikolay V.; Owen, James W.; Jimenez, Jorge H.; Dasi, Lakshmi P.; del Nido, Pedro J.; Yoganathan, Ajit P.

    2009-01-01

    Objective Reoperation rates to correct left atrioventricular valve regurgitation after primary repair of atrioventricular canal defects remain relatively high. The causes of valvular regurgitation are likely multifactorial, and simple cleft closure is often insufficient to prevent recurrence. Methods To elucidate the mechanisms leading to regurgitation, we conducted hemodynamic studies using isolated native mitral valves. Anatomy of these valves was altered to mimic atrioventricular canal type valves and studied under pediatric hemodynamic conditions. The impact of subvalvular geometry, cleft closure, annular dilatation, and annular undersizing on regurgitation were investigated. Results Papillary muscle position did not have a significant effect on regurgitation. Cleft closure had a significant impact on valvular competence, with reduction in regurgitation volume with increased cleft closure. Regurgitation volume decreased from 12.5 ± 2.4 mL/beat for an open cleft to 4.9 ± 1.9 mL/beat for a partially closed cleft and to 1.4 ± 1.6 mL/beat when the cleft was completely closed. Annular dilatation had a significant impact on regurgitation even after cleft closure. A 40% increase in annular size increased regurgitation by 59% for a partially closed cleft and by 84% for a fully closed cleft. Reducing the annular size by 20% from the physiologic level decreased the regurgitation volume by 12% for a fully open cleft and by 58% for the partially closed cleft case. Conclusions Annular dilatation after primary repair has a potentially significant role in the recurrence of atrioventricular valve regurgitation. Reducing the annular size and restricting dilatation as an adjunct to cleft closure is a promising surgical approach in such valve anatomies. PMID:19026810

  3. Conformational dynamics of bacterial trigger factor in apo and ribosome-bound states.

    PubMed

    Can, Mehmet Tarik; Kurkcuoglu, Zeynep; Ezeroglu, Gokce; Uyar, Arzu; Kurkcuoglu, Ozge; Doruker, Pemra

    2017-01-01

    The chaperone trigger factor (TF) binds to the ribosome exit tunnel and helps cotranslational folding of nascent chains (NC) in bacterial cells and chloroplasts. In this study, we aim to investigate the functional dynamics of fully-atomistic apo TF and its complex with 50S. As TF accomodates a high percentage of charged residues on its surface, the effect of ionic strength on TF dynamics is assessed here by performing five independent molecular dynamics (MD) simulations (total of 1.3 micro-second duration) at 29 mM and 150 mM ionic strengths. At both concentrations, TF exhibits high inter- and intra-domain flexibility related to its binding (BD), core (CD), and head (HD) domains. Even though large oscillations in gyration radius exist during each run, we do not detect the so-called 'fully collapsed' state with both HD and BD collapsed upon the core. In fact, the extended conformers with relatively open HD and BD are highly populated at the physiological concentration of 150 mM. More importantly, extended TF snapshots stand out in terms of favorable docking onto the 50S subunit. Elastic network modeling (ENM) indicates significant changes in TF's functional dynamics and domain decomposition depending on its conformation and positioning on the 50S. The most dominant slow motions are the lateral sweeping and vertical opening/closing of HD relative to 50S. Finally, our ENM-based efficient technique -ClustENM- is used to sample atomistic conformers starting with an extended TF-50S complex. Specifically, BD and CD motions are restricted near the tunnel exit, while HD is highly mobile. The atomistic conformers generated without an NC are in agreement with the cryo-EM maps available for TF-ribosome-NC complex.

  4. Structural transformations of carbon and boron nitride nanoscrolls at high impact collisions.

    PubMed

    Woellner, C F; Machado, L D; Autreto, P A S; de Sousa, J M; Galvao, D S

    2018-02-14

    The behavior of nanostructures under high strain-rate conditions has been the object of theoretical and experimental investigations in recent years. For instance, it has been shown that carbon and boron nitride nanotubes can be unzipped into nanoribbons at high-velocity impacts. However, the response of many nanostructures to high strain-rate conditions is still unknown. In this work, we have investigated the mechanical behavior of carbon (CNS) and boron nitride nanoscrolls (BNS) colliding against solid targets at high velocities, using fully atomistic reactive (ReaxFF) molecular dynamics (MD) simulations. CNS (BNS) are graphene (boron nitride) membranes rolled up into papyrus-like structures. Their open-ended topology leads to unique properties not found in their close-ended analogs, such as nanotubes. Our results show that collision products are mainly determined by impact velocities and by two orientation angles, which define the position of the scroll (i) axis and (ii) open edge relative to the target. Our MD results showed that for appropriate velocities and orientations, large-scale deformations and nanoscroll fractures could occur. We also observed unscrolling (scrolls going back to quasi-planar membranes), scroll unzipping into nanoribbons, and significant reconstruction due to breaking and/or formation of new chemical bonds. For particular edge orientations and velocities, conversion from open to close-ended topology is also possible, due to the fusion of nanoscroll walls.

  5. A modular, open-source, slide-scanning microscope for diagnostic applications in resource-constrained settings

    PubMed Central

    Lu, Qiang; Liu, Guanghui; Xiao, Chuanli; Hu, Chuanzhen; Zhang, Shiwu; Xu, Ronald X.; Chu, Kaiqin; Xu, Qianming

    2018-01-01

    In this paper we report the development of a cost-effective, modular, open source, and fully automated slide-scanning microscope, composed entirely of easily available off-the-shelf parts, and capable of bright field and fluorescence modes. The automated X-Y stage is composed of two low-cost micrometer stages coupled to stepper motors operated in open-loop mode. The microscope is composed of a low-cost CMOS sensor and low-cost board lenses placed in a 4f configuration. The system has approximately 1 micron resolution, limited by the f/# of available board lenses. The microscope is compact, measuring just 25×25×30 cm, and has an absolute positioning accuracy of ±1 μm in the X and Y directions. A Z-stage enables autofocusing and imaging over large fields of view even on non-planar samples, and custom software enables automatic determination of sample boundaries and image mosaicking. We demonstrate the utility of our device through imaging of fluorescent- and transmission-dye stained blood and fecal smears containing human and animal parasites, as well as several prepared tissue samples. These results demonstrate image quality comparable to high-end commercial microscopes at a cost of less than US$400 for a bright-field system, with an extra US$100 needed for the fluorescence module. PMID:29543835

  6. Structural transformations of carbon and boron nitride nanoscrolls at high impact collisions

    NASA Astrophysics Data System (ADS)

    Woellner, C. F.; Machado, L. D.; Autreto, P. A. S.; de Sousa, J. M.; Galvao, D. S.

    The behavior of nanostructures under high strain-rate conditions has been object of theoretical and experimental investigations in recent years. For instance, it has been shown that carbon and boron nitride nanotubes can be unzipped into nanoribbons at high velocity impacts. However, the response of many nanostructures to high strain-rate conditions is still not completely understood. In this work we have investigated through fully atomistic reactive (ReaxFF) molecular dynamics (MD) simulations the mechanical behavior of carbon (CNS) and boron nitride nanoscrolls (BNS) colliding against solid targets at high velocities,. CNS (BNS) nanoscrolls are graphene (boron nitride) membranes rolled up into papyrus-like structures. Their open-ended topology leads to unique properties not found in close-ended analogues, such as nanotubes. Our results show that the collision products are mainly determined by impact velocities and by two impact angles, which define the position of the scroll (i) axis and (ii) open edge relative to the target. Our MD results showed that for appropriate velocities and orientations large-scale deformations and nanoscroll fracture can occur. We also observed unscrolling (scrolls going back to quasi-planar membranes), scroll unzipping into nanoribbons, and significant reconstruction due to breaking and/or formation of new chemical bonds. For particular edge orientations and velocities, conversion from open to close-ended topology is also possible, due to the fusion of nanoscroll walls.

  7. Energetic and spatial parameters for gating of the bacterial large conductance mechanosensitive channel, MscL

    NASA Technical Reports Server (NTRS)

    Sukharev, S. I.; Sigurdson, W. J.; Kung, C.; Sachs, F.

    1999-01-01

    MscL is multimeric protein that forms a large conductance mechanosensitive channel in the inner membrane of Escherichia coli. Since MscL is gated by tension transmitted through the lipid bilayer, we have been able to measure its gating parameters as a function of absolute tension. Using purified MscL reconstituted in liposomes, we recorded single channel currents and varied the pressure gradient (P) to vary the tension (T). The tension was calculated from P and the radius of curvature was obtained using video microscopy of the patch. The probability of being open (Po) has a steep sigmoidal dependence on T, with a midpoint (T1/2) of 11.8 dyn/cm. The maximal slope sensitivity of Po/Pc was 0.63 dyn/cm per e-fold. Assuming a Boltzmann distribution, the energy difference between the closed and fully open states in the unstressed membrane was DeltaE = 18.6 kBT. If the mechanosensitivity arises from tension acting on a change of in-plane area (DeltaA), the free energy, TDeltaA, would correspond to DeltaA = 6.5 nm2. MscL is not a binary channel, but has four conducting states and a closed state. Most transition rates are independent of tension, but the rate-limiting step to opening is the transition between the closed state and the lowest conductance substate. This transition thus involves the greatest DeltaA. When summed over all transitions, the in-plane area change from closed to fully open was 6 nm2, agreeing with the value obtained in the two-state analysis. Assuming a cylindrical channel, the dimensions of the (fully open) pore were comparable to DeltaA. Thus, the tension dependence of channel gating is primarily one of increasing the external channel area to accommodate the pore of the smallest conducting state. The higher conducting states appear to involve conformational changes internal to the channel that don't involve changes in area.

  8. Characterization of a Ca(2+)-dependent anion channel from sheep tracheal epithelium incorporated into planar bilayers.

    PubMed Central

    Alton, E W; Manning, S D; Schlatter, P J; Geddes, D M; Williams, A J

    1991-01-01

    1. Anion-selective channels from the apical membrane of respiratory epithelia are involved in the secretion of chloride into the airway lumen. In cystic fibrosis (CF) there is an abnormality of phosphorylation-regulated chloride transport in this tissue, whilst a calcium-dependent pathway appears to function normally. 2. Using incorporation of apical membrane vesicles into planar phospholipid bilayers, we have characterized the most commonly seen anion-selective channel from sheep tracheal epithelium. 3. In symmetrical 200 mM-NaCl solutions the channel showed rectification, with a chord conductance at negative voltages of 107 pS and at positive voltages of 67 pS. The channel characteristically demonstrated subconductance states at 1/3 and 3/4 of the fully open level. Selectivity for chloride over sodium was approximately 6:1. 4. The channel required a minimum of approximately 100 microM-calcium on the presumed cytoplasmic surface (cis) for opening events to be observed. Open probability (Po) of the fully open state was markedly voltage dependent, but little effect of voltage was seen on the 1/3 subconductance state. 5. The relative permeabilities of monovalent anions monitored under bi-ionic conditions gave the following sequence: NO3- greater than I- greater than Cl- = Br- much much greater than F-. The order of conductances in symmetrical solutions was Cl- = NO3- greater than Br- greater than I- much much greater than F-. 6. The chloride channel blocker 5-nitro-2-(3-phenylpropylamino)-benzoate (NPPB) produced a dose-related reduction in Po with a flickering block at 10-50 microM and complete block at higher concentrations. 7. ATP produced a dose-related reduction in Po with effects at 1 microM and complete closing at 1 mM. These effects were only seen with addition to the cis chamber. 8. The catalytic subunit of protein kinase A, either when incubated with vesicles prior to incorporation into bilayers, or when added directly to either chamber, produced no effect. 9. Channels with very similar properties were seen from transfected human tracheo-bronchial cells. 10. Recent whole-cell patch-clamp studies have suggested a distinct calcium-activated chloride current in secretory epithelia. The described channel has properties in common with this current and may be a candidate for its single-channel basis. PMID:1726592

  9. Space Food Package - Gemini-Titan (GT)-4 Flight - MSC

    NASA Image and Video Library

    1965-05-01

    Food packages of beef and gravy fully reconstituted and ready to eat. An astronaut would squeeze food through opening at right side of package. Water gun is used to reconstitute dehydrated food. Scissors are used to open packages. This is the type of space food which will be used on the Gemini-Titan 4 spaceflight. MSC, Houston, TX *S65-24895 thru S65-24899

  10. Putting Teeth into Open Architectures: Infrastructure for Reducing the Need for Retesting

    DTIC Science & Technology

    2007-04-30

    the test and evaluation team. This paper outlines new approaches to quality assurance and testing that are better suited for providing...reconfiguration. Testing of reusable subsystems is also subject to the above considerations and, similarly, requires new methods for effectively achieving...architectural model. Thus, fully realizing the open architecture vision requires a new paradigm for test and evaluation. We propose such a

  11. Increasing Public Access to University Qualifications: Evolution of The University of the West Indies Open Campus

    ERIC Educational Resources Information Center

    Thomas, Michael L.; Soares, Judith

    2009-01-01

    This paper traces the evolution of The University of the West Indies' Open Campus (UWIOC), which is expected to expand service and increase access to the underserved communities of the Eastern Caribbean. At present, UWI, which caters to the needs of the 16 far flung countries of the Commonwealth Caribbean, has not been able to fully serve these…

  12. Access to Education with Online Learning and Open Educational Resources: Can They Close the Gap?

    ERIC Educational Resources Information Center

    Geith, Christine; Vignare, Karen

    2008-01-01

    One of the key concepts in the right to education is access: access to the means to fully develop as human beings as well as access to the means to gain skills, knowledge and credentials. This is an important perspective through which to examine the solutions to access enabled by Open Educational Resources (OER) and online learning. The authors…

  13. Trends and Patterns in Massive Open Online Courses: Review and Content Analysis of Research on MOOCs (2008-2015)

    ERIC Educational Resources Information Center

    Bozkurt, Aras; Akgün-Özbek, Ela; Zawacki-Richter, Olaf

    2017-01-01

    To fully understand the phenomenon of massive open online courses (MOOCs), it is important to identify and map trends and patterns in research on MOOCs. This study does so by reviewing 362 empirical articles published in peer-reviewed journals from 2008 to 2015. For the purpose of this study, content analysis and discourse analysis were employed…

  14. "A gift wrapped in barbed wire" positive and negative life changes after being diagnosed with inflammatory bowel disease.

    PubMed

    Purc-Stephenson, Rebecca; Bowlby, Desirae; Qaqish, S T

    2015-05-01

    A growing interest in posttraumatic growth among individuals who have experienced a traumatic event has given rise to measures such as the Posttraumatic Growth Inventory (PTGI; Tedeschi and Calhoun, 1996). However, such measures may not fully represent all dimensions of change among individuals diagnosed with a chronic disease and fail to highlight the negative changes that may also occur. This study explores the positive and negative changes patients with inflammatory bowel disease (IBD) have experienced since diagnosis. Three hundred and seventy-eight IBD patients provided answers to the qualitative question "Could you please describe the (positive/negative) effect(s) IBD has had on your life?" A grounded theory approach using NVivo was performed on participants' responses. Nearly 73 % of participants reported their disease positively affected their life in some way, and five themes related to positive changes emerged from the analysis: Interpersonal Relations, Personal Growth, Valuing Life, New Life Paths, and Spiritual Growth. However, almost 80 % of participants also reported their disease negatively affected their lives, with three themes emerging from the analysis: Freedom Restrictions, Psychological Side Effects, and Social Isolation. Our results support previous findings but also reveal that some dimensions related to the positive changes following adversity are not adequately assessed by the PTGI (e.g., appraising existing friendships, openness to try different forms of treatment or therapies, and psychological preparedness). The implications of these findings for future measurement and research of posttraumatic growth with IBD patients are discussed.

  15. Influence of staged-air on airflow, combustion characteristics and NO(x) emissions of a down-fired pulverized-coal 300 MW(e) utility boiler with direct flow split burners.

    PubMed

    Li, Zhengqi; Kuang, Min; Zhang, Jia; Han, Yunfeng; Zhu, Qunyi; Yang, Lianjie; Kong, Weiguang

    2010-02-01

    Cold airflow experiments were conducted to investigate the aerodynamic field in a small-scale furnace of a down-fired pulverized-coal 300 MW(e) utility boiler arranged with direct flow split burners enriched by cyclones. By increasing the staged-air ratio, a deflected flow field appeared in the lower furnace; larger staged-air ratios produced larger deflections. Industrial-sized experiments on a full-scale boiler were also performed at different staged-air damper openings with measurements taken of gas temperatures in the burner region and near the right-side wall, wall heat fluxes, and gas components (O(2), CO, and NO(x)) in the near-wall region. Combustion was unstable at staged-air damper openings below 30%. For openings of 30% and 40%, late ignition of the pulverized coal developed and large differences arose in gas temperatures and heat fluxes between the regions near the front and rear walls. In conjunction, carbon content in the fly ash was high and boiler efficiency was low with high NO(x) emission above 1200 mg/m(3) (at 6% O(2) dry). For fully open dampers, differences in gas temperatures and heat fluxes, carbon in fly ash and NO(x) emission decreased yielding an increase in boiler efficiency. The optimal setting is fully open staged-air dampers.

  16. Turbocharger with sliding piston, and having vanes and leakage dams

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Roberts, Quentin; Alnega, Ahmed

    2011-12-06

    A turbocharger having a sliding piston for regulating exhaust gas flow into the turbine wheel includes a set of first vanes mounted on a fixed first wall of the turbine nozzle and projecting axially toward an opposite second wall of the nozzle, and/or a set of second vanes mounted on the end of the piston and projecting in an opposite axial direction toward the first wall of the nozzle. For the/each set of vanes, there are leakage dams formed on the wall that is adjacent the vane tips when the piston is closed. The leakage dams are closely adjacent themore » vane tips and discourage exhaust gas from leaking in a generally radial direction past the vane tips as the piston just begins to open from its fully closed position.« less

  17. Report on the PWR-radiation protection/ALARA Committee

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malone, D.J.

    1995-03-01

    In 1992, representatives from several utilities with operational Pressurized Water Reactors (PWR) formed the PWR-Radiation Protection/ALARA Committee. The mission of the Committee is to facilitate open communications between member utilities relative to radiation protection and ALARA issues such that cost effective dose reduction and radiation protection measures may be instituted. While industry deregulation appears inevitable and inter-utility competition is on the rise, Committee members are fully committed to sharing both positive and negative experiences for the benefit of the health and safety of the radiation worker. Committee meetings provide current operational experiences through members providing Plant status reports, and informationmore » relative to programmatic improvements through member presentations and topic specific workshops. The most recent Committee workshop was facilitated to provide members with defined experiences that provide cost effective ALARA performance.« less

  18. Observation of Mollow Triplets with Tunable Interactions in Double Lambda Systems of Individual Hole Spins

    NASA Astrophysics Data System (ADS)

    Lagoudakis, K. G.; Fischer, K. A.; Sarmiento, T.; McMahon, P. L.; Radulaski, M.; Zhang, J. L.; Kelaita, Y.; Dory, C.; Müller, K.; Vučković, J.

    2017-01-01

    Although individual spins in quantum dots have been studied extensively as qubits, their investigation under strong resonant driving in the scope of accessing Mollow physics is still an open question. Here, we have grown high quality positively charged quantum dots embedded in a planar microcavity that enable enhanced light-matter interactions. Under a strong magnetic field in the Voigt configuration, individual positively charged quantum dots provide a double lambda level structure. Using a combination of above-band and resonant excitation, we observe the formation of Mollow triplets on all optical transitions. We find that when the strong resonant drive power is used to tune the Mollow-triplet lines through each other, we observe anticrossings. We also demonstrate that the interaction that gives rise to the anticrossings can be controlled in strength by tuning the polarization of the resonant laser drive. Quantum-optical modeling of our system fully captures the experimentally observed spectra and provides insight on the complicated level structure that results from the strong driving of the double lambda system.

  19. Toward Mass Customization in the Age of Information: The Case for Open Engineering Systems

    NASA Technical Reports Server (NTRS)

    Simpson, Timothy W.; Lautenschlager, Uwe; Mistree, Farrokh

    1997-01-01

    In the Industrial Era, manufacturers used "dedicated" engineering systems to mass produce their products. In today's increasingly competitive markets, the trend is toward mass customization, something that becomes increasingly feasible when modern information technologies are used to create open engineering systems. Our focus is on how designers can provide enhanced product flexibility and variety (if not fully customized products) through the development of open engineering systems. After presenting several industrial examples, we anchor our new systems philosophy with two real engineering applications. We believe that manufacturers who adopt open systems will achieve competitive advantage in the Information Age.

  20. Intergenerational redistribution in a small open economy with endogenous fertility.

    PubMed

    Kolmar, M

    1997-08-01

    The literature comparing fully funded (FF) and pay-as-you-go (PAYG) financed public pension systems in small, open economies stresses the importance of the Aaron condition as an empirical measure to decide which system can be expected to lead to a higher long-run welfare. A country with a PAYG system has a higher level of utility than a country with a FF system if the growth rate of total wage income exceeds the interest rate. Endogenizing population growth makes one determinant of the growth rate of wage incomes endogenous. The author demonstrates why the Aaron condition ceases to be a good indicator in this case. For PAYG-financed pension systems, claims can be calculated according to individual contributions or the number of children in a family. Analysis determined that for both structural determinants there is no interior solution of the problem of intergenerational utility maximization. Pure systems are therefore always welfare maximizing. Moreover, children-related pension claims induce a fiscal externality which tends to be positive. The determination of the optimal contribution rate shows that the Aaron condition is generally a misleading indicator for the comparison of FF and PAYG-financed pension systems.

  1. VizieR Online Data Catalog: Proper motions of PM2000 open clusters (Krone-Martins+, 2010)

    NASA Astrophysics Data System (ADS)

    Krone-Martins, A.; Soubiran, C.; Ducourant, C.; Teixeira, R.; Le Campion, J. F.

    2010-04-01

    We present lists of proper-motions and kinematic membership probabilities in the region of 49 open clusters or possible open clusters. The stellar proper motions were taken from the Bordeaux PM2000 catalogue. The segregation between cluster and field stars and the assignment of membership probabilities was accomplished by applying a fully automated method based on parametrisations for the probability distribution functions and genetic algorithm optimisation heuristics associated with a derivative-based hill climbing algorithm for the likelihood optimization. (3 data files).

  2. Measurements of Pressure Distributions and Force Coefficients in a Squeeze Film Damper. Part 1: Fully Open Ended Configuration

    NASA Technical Reports Server (NTRS)

    Jung, S. Y.; Sanandres, Luis A.; Vance, J. M.

    1991-01-01

    Measurements of pressure distributions and force coefficients were carried out in two types of squeeze film dampers, executing a circular centered orbit, an open-ended configuration, and a partially sealed one, in order to investigate the effect of fluid inertia and cavitation on pressure distributions and force coefficients. Dynamic pressure measurements were carried out for two orbit radii, epsilon 0.5 and 0.8. It was found that the partially sealed configuration was less influenced by fluid inertia than the open ended configuration.

  3. The Value of Open Geographical Data - The Danish Case

    NASA Astrophysics Data System (ADS)

    Colding, T. S.; Folner, M.; Krarup, S.; Kongsbak, J.

    2013-12-01

    Good basic data for everyone is part of the common public-sector digitization strategy for 2011 to 2015. The vision is that basic data is to be the high-quality common foundation for public sector administration; efficiently updated at one place, and used by everyone - including the private sector. Open basic data will benefit public-sector efficiency as well as innovation and value creation by Danish society in general. With basic data as a new digital raw material, commercial products can be developed and public information and services can be improved, providing for greater insight and stronger democracy. On the first of January 2013 Denmark released this digital raw material. As a general rule, all basic data is to be made freely available to all public authorities, private businesses and individuals. This makes basic data a common digital resource, which can be exploited freely for commercial as well as non-commercial purposes. A positive business case contributed in convincing Danish politicians to approve the basic data program. Once the initiatives have been fully implemented, the revenues for society are expected to be approx. DKK 800 million annually. Private-sector revenues will be up to DKK half a billion annually, and it is expected that e.g. the real estate, insurance, financial, and telecom sectors, as well as GPS (sat-nav) manufacturers, public companies and entrepreneurs will be among those to benefit hugely from the initiatives. The financial gain for the private sector of open geographical data alone is expected to be approx. 100 million DKK annually. As part of the Basic data program The Danish Geodata Agency (Ministry of the Environment) gave free access to all topographic data, cadastral maps and Digital Elevation Model on Jan. 1st, 2013. The Danish Geodata Agency has decided to measure the effect of the open geographic data in the public sector (efficiency) and in the private sector (growth). The effect will be measured by using reference data (baseline analysis) from 2012. The reference data will cover statistics about who was using which dataset, for what, and what was the value of the use of data. This presentation briefly introduces the process behind open geographical data in Denmark, including a presentation of the positive business case. The presentation focuses on the research design used for measuring the effect of open geographical data in Denmark. Finally, the preliminary responses of open geographical data in the private and the public sector will be presented.

  4. Harmful Algal Blooms (HABs)

    MedlinePlus

    ... yet understand fully how many HABs might affect human health, health agencies in the United States and abroad ... 232-6348 Email CDC-INFO U.S. Department of Health & Human Services HHS/Open USA.gov TOP

  5. Outcomes in the Orthopaedic Sports Medicine Fellowship Match, 2010-2017.

    PubMed

    Mulcahey, Mary K; Hayes, Meghan K; Smith, Christopher M; Kraeutler, Matthew J; Trojan, Jeffrey D; McCarty, Eric C

    2018-05-01

    Sports medicine is one of the most competitive fellowships in orthopaedic surgery. Despite its popularity, fellowship applicants have limited understanding of the orthopaedic sports medicine fellowship match process. To define key outcomes in the orthopaedic sports medicine fellowship match, including the overall match rate, number of programs filled, and number of applicants ranked by programs that filled between 2010 and 2017. Cross-sectional study. This study utilized data regarding the orthopaedic sports medicine fellowship match collected by the American Orthopaedic Society for Sports Medicine (AOSSM) from 2010 through 2017. Applicant data included number of applicants, number of matched and unmatched applicants, and percentage of applicants matching into their top choices. Fellowship program data included number of programs participating in the match and number of applicants ranked by filled and unfilled programs. Between 2010 and 2017, the mean number of orthopaedic sports medicine fellowship applicants was 244.8. On average, 92.0% of applicants matched into a fellowship program. The mean number of programs participating in the fellowship match was 92.9, with a mean of 219.9 accredited positions and 5.4 nonaccredited positions. Over the time period studied, a mean of 75.8% of programs matched all available positions. Programs that matched fully ranked 9.0 applicants per position, on average, compared with a mean of 6.5 applicants ranked per position among programs that did not fully match ( P = .0016). From 2010 to 2017, the number of applicants, positions available, overall match rate, and number of programs participating in the orthopaedic sports medicine fellowship match have remained consistent. The mean number of applicants per position ranked by fully matched fellowship programs was 9.0 compared with a mean of 6.5 applicants per position ranked by programs that did not fully match. These data may be helpful as we look to the future of orthopaedic sports medicine fellowship positions and the match process. In addition, this study reveals characteristics that divide sports medicine fellowship programs that fully match from those that do not. Applicants and/or fellowship program directors may utilize this information to modify their approach to the match process going forward.

  6. Outcomes in the Orthopaedic Sports Medicine Fellowship Match, 2010-2017

    PubMed Central

    Mulcahey, Mary K.; Hayes, Meghan K.; Smith, Christopher M.; Kraeutler, Matthew J.; Trojan, Jeffrey D.; McCarty, Eric C.

    2018-01-01

    Background: Sports medicine is one of the most competitive fellowships in orthopaedic surgery. Despite its popularity, fellowship applicants have limited understanding of the orthopaedic sports medicine fellowship match process. Purpose: To define key outcomes in the orthopaedic sports medicine fellowship match, including the overall match rate, number of programs filled, and number of applicants ranked by programs that filled between 2010 and 2017. Study Design: Cross-sectional study. Methods: This study utilized data regarding the orthopaedic sports medicine fellowship match collected by the American Orthopaedic Society for Sports Medicine (AOSSM) from 2010 through 2017. Applicant data included number of applicants, number of matched and unmatched applicants, and percentage of applicants matching into their top choices. Fellowship program data included number of programs participating in the match and number of applicants ranked by filled and unfilled programs. Results: Between 2010 and 2017, the mean number of orthopaedic sports medicine fellowship applicants was 244.8. On average, 92.0% of applicants matched into a fellowship program. The mean number of programs participating in the fellowship match was 92.9, with a mean of 219.9 accredited positions and 5.4 nonaccredited positions. Over the time period studied, a mean of 75.8% of programs matched all available positions. Programs that matched fully ranked 9.0 applicants per position, on average, compared with a mean of 6.5 applicants ranked per position among programs that did not fully match (P = .0016). Conclusion: From 2010 to 2017, the number of applicants, positions available, overall match rate, and number of programs participating in the orthopaedic sports medicine fellowship match have remained consistent. The mean number of applicants per position ranked by fully matched fellowship programs was 9.0 compared with a mean of 6.5 applicants per position ranked by programs that did not fully match. These data may be helpful as we look to the future of orthopaedic sports medicine fellowship positions and the match process. In addition, this study reveals characteristics that divide sports medicine fellowship programs that fully match from those that do not. Applicants and/or fellowship program directors may utilize this information to modify their approach to the match process going forward. PMID:29796398

  7. TreeRipper web application: towards a fully automated optical tree recognition software.

    PubMed

    Hughes, Joseph

    2011-05-20

    Relationships between species, genes and genomes have been printed as trees for over a century. Whilst this may have been the best format for exchanging and sharing phylogenetic hypotheses during the 20th century, the worldwide web now provides faster and automated ways of transferring and sharing phylogenetic knowledge. However, novel software is needed to defrost these published phylogenies for the 21st century. TreeRipper is a simple website for the fully-automated recognition of multifurcating phylogenetic trees (http://linnaeus.zoology.gla.ac.uk/~jhughes/treeripper/). The program accepts a range of input image formats (PNG, JPG/JPEG or GIF). The underlying command line c++ program follows a number of cleaning steps to detect lines, remove node labels, patch-up broken lines and corners and detect line edges. The edge contour is then determined to detect the branch length, tip label positions and the topology of the tree. Optical Character Recognition (OCR) is used to convert the tip labels into text with the freely available tesseract-ocr software. 32% of images meeting the prerequisites for TreeRipper were successfully recognised, the largest tree had 115 leaves. Despite the diversity of ways phylogenies have been illustrated making the design of a fully automated tree recognition software difficult, TreeRipper is a step towards automating the digitization of past phylogenies. We also provide a dataset of 100 tree images and associated tree files for training and/or benchmarking future software. TreeRipper is an open source project licensed under the GNU General Public Licence v3.

  8. Toward the Geoscience Paper of the Future: Best practices for documenting and sharing research from data to software to provenance

    NASA Astrophysics Data System (ADS)

    Gil, Yolanda; David, Cédric H.; Demir, Ibrahim; Essawy, Bakinam T.; Fulweiler, Robinson W.; Goodall, Jonathan L.; Karlstrom, Leif; Lee, Huikyo; Mills, Heath J.; Oh, Ji-Hyun; Pierce, Suzanne A.; Pope, Allen; Tzeng, Mimi W.; Villamizar, Sandra R.; Yu, Xuan

    2016-10-01

    Geoscientists now live in a world rich with digital data and methods, and their computational research cannot be fully captured in traditional publications. The Geoscience Paper of the Future (GPF) presents an approach to fully document, share, and cite all their research products including data, software, and computational provenance. This article proposes best practices for GPF authors to make data, software, and methods openly accessible, citable, and well documented. The publication of digital objects empowers scientists to manage their research products as valuable scientific assets in an open and transparent way that enables broader access by other scientists, students, decision makers, and the public. Improving documentation and dissemination of research will accelerate the pace of scientific discovery by improving the ability of others to build upon published work.

  9. PB-AM: An open-source, fully analytical linear poisson-boltzmann solver

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Felberg, Lisa E.; Brookes, David H.; Yap, Eng-Hui

    2016-11-02

    We present the open source distributed software package Poisson-Boltzmann Analytical Method (PB-AM), a fully analytical solution to the linearized Poisson Boltzmann equation. The PB-AM software package includes the generation of outputs files appropriate for visualization using VMD, a Brownian dynamics scheme that uses periodic boundary conditions to simulate dynamics, the ability to specify docking criteria, and offers two different kinetics schemes to evaluate biomolecular association rate constants. Given that PB-AM defines mutual polarization completely and accurately, it can be refactored as a many-body expansion to explore 2- and 3-body polarization. Additionally, the software has been integrated into the Adaptive Poisson-Boltzmannmore » Solver (APBS) software package to make it more accessible to a larger group of scientists, educators and students that are more familiar with the APBS framework.« less

  10. Assumptions and Challenges of Open Scholarship

    ERIC Educational Resources Information Center

    Veletsianos, George; Kimmons, Royce

    2012-01-01

    Researchers, educators, policymakers, and other education stakeholders hope and anticipate that openness and open scholarship will generate positive outcomes for education and scholarship. Given the emerging nature of open practices, educators and scholars are finding themselves in a position in which they can shape and/or be shaped by openness.…

  11. The Boron Efflux Transporter ROTTEN EAR Is Required for Maize Inflorescence Development and Fertility[C][W][OPEN

    PubMed Central

    Chatterjee, Mithu; Tabi, Zara; Galli, Mary; Malcomber, Simon; Buck, Amy; Muszynski, Michael; Gallavotti, Andrea

    2014-01-01

    Although boron has a relatively low natural abundance, it is an essential plant micronutrient. Boron deficiencies cause major crop losses in several areas of the world, affecting reproduction and yield in diverse plant species. Despite the importance of boron in crop productivity, surprisingly little is known about its effects on developing reproductive organs. We isolated a maize (Zea mays) mutant, called rotten ear (rte), that shows distinct defects in vegetative and reproductive development, eventually causing widespread sterility in its inflorescences, the tassel and the ear. Positional cloning revealed that rte encodes a membrane-localized boron efflux transporter, co-orthologous to the Arabidopsis thaliana BOR1 protein. Depending on the availability of boron in the soil, rte plants show a wide range of phenotypic defects that can be fully rescued by supplementing the soil with exogenous boric acid, indicating that rte is crucial for boron transport into aerial tissues. rte is expressed in cells surrounding the xylem in both vegetative and reproductive tissues and is required for meristem activity and organ development. We show that low boron supply to the inflorescences results in widespread defects in cell and cell wall integrity, highlighting the structural importance of boron in the formation of fully fertile reproductive organs. PMID:25035400

  12. Markerless 3D motion capture for animal locomotion studies

    PubMed Central

    Sellers, William Irvin; Hirasaki, Eishi

    2014-01-01

    ABSTRACT Obtaining quantitative data describing the movements of animals is an essential step in understanding their locomotor biology. Outside the laboratory, measuring animal locomotion often relies on video-based approaches and analysis is hampered because of difficulties in calibration and often the limited availability of possible camera positions. It is also usually restricted to two dimensions, which is often an undesirable over-simplification given the essentially three-dimensional nature of many locomotor performances. In this paper we demonstrate a fully three-dimensional approach based on 3D photogrammetric reconstruction using multiple, synchronised video cameras. This approach allows full calibration based on the separation of the individual cameras and will work fully automatically with completely unmarked and undisturbed animals. As such it has the potential to revolutionise work carried out on free-ranging animals in sanctuaries and zoological gardens where ad hoc approaches are essential and access within enclosures often severely restricted. The paper demonstrates the effectiveness of video-based 3D photogrammetry with examples from primates and birds, as well as discussing the current limitations of this technique and illustrating the accuracies that can be obtained. All the software required is open source so this can be a very cost effective approach and provides a methodology of obtaining data in situations where other approaches would be completely ineffective. PMID:24972869

  13. Reanalysis of 24 Nearby Open Clusters using Gaia data

    NASA Astrophysics Data System (ADS)

    Yen, Steffi X.; Reffert, Sabine; Röser, Siegfried; Schilbach, Elena; Kharchenko, Nina V.; Piskunov, Anatoly E.

    2018-04-01

    We have developed a fully automated cluster characterization pipeline, which simultaneously determines cluster membership and fits the fundamental cluster parameters: distance, reddening, and age. We present results for 24 established clusters and compare them to literature values. Given the large amount of stellar data for clusters available from Gaia DR2 in 2018, this pipeline will be beneficial to analyzing the parameters of open clusters in our Galaxy.

  14. Indoor birch pollen concentrations differ with ventilation scheme, room location, and meteorological factors.

    PubMed

    Menzel, A; Matiu, M; Michaelis, R; Jochner, S

    2017-05-01

    Indoor pollen concentrations are an underestimated human health issue. In this study, we measured hourly indoor birch pollen concentrations on 8 days in April 2015 with portable pollen traps in five rooms of a university building at Freising, Germany. These data were compared to the respective outdoor values right in front of the rooms and to background pollen data. The rooms were characterized by different aspects and window ventilation schemes. Meteorological data were equally measured directly in front of the windows. Outdoor concentration could be partly explained with phenological data of 56 birches in the surrounding showing concurrent high numbers of trees attaining flowering stages. Indoor pollen concentrations were lower than outdoor concentrations: mean indoor/outdoor (I/O) ratio was highest in a room with fully opened window and additional mechanical ventilation (.75), followed by rooms with fully opened windows (.35, .12) and lowest in neighboring rooms with tilted window (.19) or windows only opened for short ventilation (.07). Hourly I/O ratios depended on meteorology and increased with outside temperature and wind speed oriented perpendicular to the window opening. Indoor concentrations additionally depended on the previously measured concentrations, indicating accumulation of pollen inside the rooms even after the full flowering period. © 2016 The Authors. Indoor Air Published by John Wiley & Sons Ltd.

  15. KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, a cameraman films part of Discovery’s payload bay for a special feature on the KSC Web. In the background is the open hatch of the airlock, located inside the middeck of the spacecraft’s pressurized crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. Support functions include airlock depressurization and repressurization, extravehicular activity equipment recharge, liquid-cooled garment water cooling, EVA equipment checkout, donning and communications. The outer hatch isolates the airlock from the unpressurized payload bay when closed and permits the EVA crew members to exit from the airlock to the payload bay when open.

    NASA Image and Video Library

    2004-01-22

    KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, a cameraman films part of Discovery’s payload bay for a special feature on the KSC Web. In the background is the open hatch of the airlock, located inside the middeck of the spacecraft’s pressurized crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. Support functions include airlock depressurization and repressurization, extravehicular activity equipment recharge, liquid-cooled garment water cooling, EVA equipment checkout, donning and communications. The outer hatch isolates the airlock from the unpressurized payload bay when closed and permits the EVA crew members to exit from the airlock to the payload bay when open.

  16. Develop Direct Geo-referencing System Based on Open Source Software and Hardware Platform

    NASA Astrophysics Data System (ADS)

    Liu, H. S.; Liao, H. M.

    2015-08-01

    Direct geo-referencing system uses the technology of remote sensing to quickly grasp images, GPS tracks, and camera position. These data allows the construction of large volumes of images with geographic coordinates. So that users can be measured directly on the images. In order to properly calculate positioning, all the sensor signals must be synchronized. Traditional aerial photography use Position and Orientation System (POS) to integrate image, coordinates and camera position. However, it is very expensive. And users could not use the result immediately because the position information does not embed into image. To considerations of economy and efficiency, this study aims to develop a direct geo-referencing system based on open source software and hardware platform. After using Arduino microcontroller board to integrate the signals, we then can calculate positioning with open source software OpenCV. In the end, we use open source panorama browser, panini, and integrate all these to open source GIS software, Quantum GIS. A wholesome collection of data - a data processing system could be constructed.

  17. Experimental measurements of heat transfer coefficient in a partially/fully opened tilted cavity

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chakroun, W.; Elsayed, M.M.; Al-Fahed, S.F.

    1997-11-01

    An experimental investigation was carried out to determine the heat transfer coefficient from a rectangular tilted cavity to the ambient due to the buoyancy driven flow in the cavity. The cavity is partially or fully open from one side. All the walls of the cavity are adiabatic except the wall facing the cavity opening which is heated at a constant heat flux. Air was used as the cavity fluid and the experiments were carried out at a flux Grashof number of 5.5 {times} 10{sup 8}. The tilt angle of the cavity, measured from the vertical direction, was changed between {minus}90more » deg to +90 deg in 15 deg increments. Also, geometries of aspect ratio (height-to-width of cavity) of 1.0, 0.5, and 0.25 and of opening ratio (opening height to cavity height) of 1.0, 0.5, and 0.25 were considered in the study. The results are presented in terms of the average Nusselt number for different values of the above experimental parameters. Conclusions are derived for the effect of changing the tilt angle, the aspect ratio, or the opening ratio of the cavity on the average heat transfer coefficient between the cavity and the ambient air. Buoyancy-driven flow in rectangular cavities has been widely investigated by many researchers. This geometry is of special interest in many solar applications such as in solar passive heating, solar concentrators, and solar central receivers. The importance of the geometry extends to other engineering applications such as electronic equipment, fire research, and energy conservation in buildings.« less

  18. Light, soil moisture, and tree reproduction in hardwood forest openings.

    Treesearch

    Leon S. Minckler; John D. Woerheide; Richard C. Schlesinger

    1973-01-01

    Light, soil moisture, and tree reproduction were measured at five positions in six openings on each of three aspects in southern Illinois. Amount of light received was clearly related to position in the light openings, opening size, and aspect. More moisture was available in the centers of the openings, although 4 years after openings were made the differences...

  19. Two-dimensional correlation and codistribution spectroscopy (2DCOS and 2DCDS) analyses of time-dependent ATR IR spectra of D-glucose anomers undergoing mutarotation process in water

    NASA Astrophysics Data System (ADS)

    Noda, Isao

    2018-05-01

    Two cyclic diastereoisomeric structures, known as α- and β-anomers of D-glucose with different configurations around C1 with OH groups in axial or equitroial positions, undergo the mutarotation conversion to each other in water. Two-dimensional correlation and codistribution spectroscopy (2DCOS and 2DCDS) analyses were applied to the time-dependent ATR IR spectra of aqueous solutions of α- and β-D-glucose undergoing such mutarotation conversion. 2DCOS analysis reveals that the increase and decrease in the IR intensities after the dissolution of α- or β-D-glucose are not fully synchronized, suggesting the mutarotation of D-glucose in water is not a simple binary conversion process but a multi-step reaction involving an intermediate species with a finite and observable concentration level and lifetime. 2DCDS analysis of the time-dependent ATR IR spectra clearly demonstrated the presence of intermediate species contributing to the band positions overlapped close to bands for α- and β-D-glucose. The fact that band positions identified for the intermediate species for α- to β-D-glucose conversion are the same for the reverse reaction suggests that they arise from the same species, most likely the open-ring structure produced by the hydrolysis.

  20. Observation of Mollow Triplets with Tunable Interactions in Double Lambda Systems of Individual Hole Spins.

    NASA Astrophysics Data System (ADS)

    Lagoudakis, K. G.; Fischer, K. A.; Sarmiento, T.; McMahon, P. L.; Radulaski, M.; Zhang, J. L.; Kelaita, Y.; Dory, C.; Mueller, K. M.; Vuckovic, J.

    Although individual spins in quantum dots have been extensively used as qubits, their investigation under strong resonant driving in view of accessing Mollow physics is still an open question. We have grown high quality positively charged quantum dots (QD) embedded in a planar microcavity that enable enhanced light matter interactions. Applying a strong magnetic field in the Voigt configuration, individual positively charged quantum dots provide a double lambda level structure. Using a combination of above band and resonant excitation, we observe the formation of Mollow triplets. We investigate the regime where the Mollow sideband splittings are equal to the Zeeman splitting; we observe strong interactions between the Mollow sidebands of the inner transitions and the outer transitions in the form of very clear anticrossings. We investigated these anticrossings and we were able to modify the observed anticrossing splittings on demand by rotating the polarization of the resonant laser. We also developed a quantum-optical model of our system that fully captures the experimentally observed spectra and provides insight on the complicated level structure that results from the strong driving of our positively charged quantum dot. The authors acknowledge financial support from the Army Research Office (Grant No. W911NF1310309) and support from the National Science Foundation, Division of Materials Research (Grant No. 1503759).

  1. Grand Views of Evolution.

    PubMed

    de Vladar, Harold P; Santos, Mauro; Szathmáry, Eörs

    2017-05-01

    Despite major advances in evolutionary theories, some aspects of evolution remain neglected: whether evolution: would come to a halt without abiotic change; is unbounded and open-ended; or is progressive and something beyond fitness is maximized. Here, we discuss some models of ecology and evolution and argue that ecological change, resulting in Red Queen dynamics, facilitates (but does not ensure) innovation. We distinguish three forms of open-endedness. In weak open-endedness, novel phenotypes can occur indefinitely. Strong open-endedness requires the continual appearance of evolutionary novelties and/or innovations. Ultimate open-endedness entails an indefinite increase in complexity, which requires unlimited heredity. Open-ended innovation needs exaptations that generate novel niches. This can result in new traits and new rules as the dynamics unfolds, suggesting that evolution is not fully algorithmic. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Opening-assisted coherent transport in the semiclassical regime

    NASA Astrophysics Data System (ADS)

    Zhang, Yang; Celardo, G. Luca; Borgonovi, Fausto; Kaplan, Lev

    2017-02-01

    We study quantum enhancement of transport in open systems in the presence of disorder and dephasing. Quantum coherence effects may significantly enhance transport in open systems even in the semiclassical regime (where the decoherence rate is greater than the intersite hopping amplitude), as long as the disorder is sufficiently strong. When the strengths of disorder and dephasing are fixed, there is an optimal opening strength at which the coherent transport enhancement is optimized. Analytic results are obtained in two simple paradigmatic tight-binding models of large systems: the linear chain and the fully connected network. The physical behavior is also reflected in the Fenna-Matthews-Olson (FMO) photosynthetic complex, which may be viewed as intermediate between these paradigmatic models.

  3. The Longhorn Array Database (LAD): An Open-Source, MIAME compliant implementation of the Stanford Microarray Database (SMD)

    PubMed Central

    Killion, Patrick J; Sherlock, Gavin; Iyer, Vishwanath R

    2003-01-01

    Background The power of microarray analysis can be realized only if data is systematically archived and linked to biological annotations as well as analysis algorithms. Description The Longhorn Array Database (LAD) is a MIAME compliant microarray database that operates on PostgreSQL and Linux. It is a fully open source version of the Stanford Microarray Database (SMD), one of the largest microarray databases. LAD is available at Conclusions Our development of LAD provides a simple, free, open, reliable and proven solution for storage and analysis of two-color microarray data. PMID:12930545

  4. Intelligence and culture: how culture shapes what intelligence means, and the implications for a science of well-being.

    PubMed Central

    Sternberg, Robert J; Grigorenko, Elena L

    2004-01-01

    This paper discusses the relationship between culture and intelligence. The main message of the paper is that intelligence cannot fully or even meaningfully be understood outside its cultural context. Behaviour that is considered intelligent in one culture may be considered unintelligent in another culture, and vice versa. Moreover, people in different cultures have different implicit (folk) theories of intelligence, so may not even mean the same thing by the word. The relationships between different aspects of intelligence can vary across cultures, with correlations that are positive in one setting proving to be negative in another. The paper opens with a general discussion of issues regarding the relationship between the two concepts. It then describes the theory of successful intelligence, which motivates our work on the interface between culture and intelligence. Finally, the article draws some conclusions. PMID:15347533

  5. An Outdoor Navigation Platform with a 3D Scanner and Gyro-assisted Odometry

    NASA Astrophysics Data System (ADS)

    Yoshida, Tomoaki; Irie, Kiyoshi; Koyanagi, Eiji; Tomono, Masahiro

    This paper proposes a light-weight navigation platform that consists of gyro-assisted odometry, a 3D laser scanner and map-based localization for human-scale robots. The gyro-assisted odometry provides highly accurate positioning only by dead-reckoning. The 3D laser scanner has a wide field of view and uniform measuring-point distribution. The map-based localization is robust and computationally inexpensive by utilizing a particle filter on a 2D grid map generated by projecting 3D points on to the ground. The system uses small and low-cost sensors, and can be applied to a variety of mobile robots in human-scale environments. Outdoor navigation experiments were conducted at the Tsukuba Challenge held in 2009 and 2010, which is an open proving ground for human-scale robots. Our robot successfully navigated the assigned 1-km courses in a fully autonomous mode multiple times.

  6. Formant characteristics of human laughter.

    PubMed

    Szameitat, Diana P; Darwin, Chris J; Szameitat, André J; Wildgruber, Dirk; Alter, Kai

    2011-01-01

    Although laughter is an important aspect of nonverbal vocalization, its acoustic properties are still not fully understood. Extreme articulation during laughter production, such as wide jaw opening, suggests that laughter can have very high first formant (F(1)) frequencies. We measured fundamental frequency and formant frequencies of the vowels produced in the vocalic segments of laughter. Vocalic segments showed higher average F(1) frequencies than those previously reported and individual values could be as high as 1100 Hz for male speakers and 1500 Hz for female speakers. To our knowledge, these are the highest F(1) frequencies reported to date for human vocalizations, exceeding even the F(1) frequencies reported for trained soprano singers. These exceptionally high F(1) values are likely to be based on the extreme positions adopted by the vocal tract during laughter in combination with physiological constraints accompanying the production of a "pressed" voice. Copyright © 2011 The Voice Foundation. All rights reserved.

  7. Palladium-mediated strategies for functionalizing the dihydroazulene photoswitch: paving the way for its exploitation in molecular electronics.

    PubMed

    Jevric, Martyn; Broman, Søren Lindbæk; Nielsen, Mogens Brøndsted

    2013-05-03

    The dihydroazulene (DHA)/vinylheptafulvene (VHF) photo/thermoswitch has attracted interest as a molecular switch for advanced materials and molecular electronics. We report here two synthetic approaches using palladium catalysis for synthesizing dihydroazulene (DHA) photoswitches with thioacetate anchoring groups intended for molecular electronics applications. The first methodology involves a Suzuki coupling using tert-butyl thioether protecting groups. Conversion to the thioacetate using boron tribromide/acetyl chloride results in the formation of the product as a mixture of regioisomers mediated by a ring-opening reaction. The second approach circumvents isomerization by the synthesis of stannanes as intermediates and their use in a Stille coupling. Although fully unsaturated azulenes are formed as byproducts during the synthesis of the DHA stannanes, this approach allowed the regioselective incorporation of the thioacetate anchoring group in either one of the two ends (positions 2 or 7) or at both.

  8. A conservative, relativistic Fokker-Planck solver for runaway electrons

    NASA Astrophysics Data System (ADS)

    Chacon, Luis; Taitano, W.; Tang, X.; Guo, Z.; McDevitt, C.

    2017-10-01

    Relativistic runaway electrons develop when electric fields surpass a critical electric field, Ec =EDvth/c 2 , with ED the Dreicer field (which is the electric field at which the whole thermal electron population runs away). Above this critical field, electron tails accelerate relativistically until they are arrested by radiative processes. In regimes above this critical electric field (but below the Dreicer field), correctly capturing the interplay between the electron thermal population and the runaway tail is key, and demands a full nonlinear relativistic Fokker-Planck treatment. In this presentation, we report on progress towards a fully conservative, implicit, adaptive implementation of the relativistic electron Fokker-Planck equation. Strict conservation properties, as well as positivity preservation, are a must to avoid spurious numerical effects, and to be able to capture tenuous electron runaway tails for fields just above Ec.

  9. Are needs to manage uncertainty and threat associated with political conservatism or ideological extremity?

    PubMed

    Jost, John T; Napier, Jaime L; Thorisdottir, Hulda; Gosling, Samuel D; Palfai, Tibor P; Ostafin, Brian

    2007-07-01

    Three studies are conducted to assess the uncertainty- threat model of political conservatism, which posits that psychological needs to manage uncertainty and threat are associated with political orientation. Results from structural equation models provide consistent support for the hypothesis that uncertainty avoidance (e.g., need for order, intolerance of ambiguity, and lack of openness to experience) and threat management (e.g., death anxiety, system threat, and perceptions of a dangerous world) each contributes independently to conservatism (vs. liberalism). No support is obtained for alternative models, which predict that uncertainty and threat management are associated with ideological extremism or extreme forms of conservatism only. Study 3 also reveals that resistance to change fully mediates the association between uncertainty avoidance and conservatism, whereas opposition to equality partially mediates the association between threat and conservatism. Implications for understanding the epistemic and existential bases of political orientation are discussed.

  10. Laboratory animal science course in Switzerland: participants' points of view and implications for organizers.

    PubMed

    Crettaz von Roten, Fabienne

    2018-02-01

    Switzerland has implemented a mandatory training in laboratory animal science since 1999; however a comprehensive assessment of its effects has never been undertaken so far. The results from the analysis of participants in the Swiss Federation of European Laboratory Animal Science Associations (FELASA) Category B compulsory courses in laboratory animal science run in 2010, 2012, 2014 and 2016 showed that the participants fully appreciated all elements of the course. The use of live animals during the course was supported and explained by six arguments characterized with cognitive, emotional and forward-looking factors. A large majority considered that the 3R (replacement, reduction and refinement) principles were adequately applied during the course. Responses to an open question offered some ideas for improvements. This overall positive picture, however, revealed divergent answers from different subpopulations in our sample (for example, scientists with more hindsight, scientists trained in biology, or participants from Asian countries).

  11. Open peer review at four STEM journals: an observational overview.

    PubMed

    Ford, Emily

    2015-01-01

    Open peer review, peer review where authors' and reviewers' identities are disclosed to one another, is a growing trend in scholarly publishing. Through observation of four journals in STEM disciplines, PLOS One, Atmospheric Chemistry & Physics, PeerJ, and F1000Research, an observational overview is conducted. The overview relies on defined characteristics of open peer review. Results show that despite differing open peer review implementations, each journal retains editorial involvement in scholarly publishing. Further, the analysis shows that only one of these implementations is fully transparent in its peer review and decision making process. Finally, the overview contends that journals should clearly outline peer review and editorial processes in order to allow for open peer review to be better understood and adopted by authors, reviewers, editors, and readers of science communications.

  12. ReprDB and panDB: minimalist databases with maximal microbial representation.

    PubMed

    Zhou, Wei; Gay, Nicole; Oh, Julia

    2018-01-18

    Profiling of shotgun metagenomic samples is hindered by a lack of unified microbial reference genome databases that (i) assemble genomic information from all open access microbial genomes, (ii) have relatively small sizes, and (iii) are compatible to various metagenomic read mapping tools. Moreover, computational tools to rapidly compile and update such databases to accommodate the rapid increase in new reference genomes do not exist. As a result, database-guided analyses often fail to profile a substantial fraction of metagenomic shotgun sequencing reads from complex microbiomes. We report pipelines that efficiently traverse all open access microbial genomes and assemble non-redundant genomic information. The pipelines result in two species-resolution microbial reference databases of relatively small sizes: reprDB, which assembles microbial representative or reference genomes, and panDB, for which we developed a novel iterative alignment algorithm to identify and assemble non-redundant genomic regions in multiple sequenced strains. With the databases, we managed to assign taxonomic labels and genome positions to the majority of metagenomic reads from human skin and gut microbiomes, demonstrating a significant improvement over a previous database-guided analysis on the same datasets. reprDB and panDB leverage the rapid increases in the number of open access microbial genomes to more fully profile metagenomic samples. Additionally, the databases exclude redundant sequence information to avoid inflated storage or memory space and indexing or analyzing time. Finally, the novel iterative alignment algorithm significantly increases efficiency in pan-genome identification and can be useful in comparative genomic analyses.

  13. Optimizing python-based ROOT I/O with PyPy's tracing just-in-time compiler

    NASA Astrophysics Data System (ADS)

    Tlp Lavrijsen, Wim

    2012-12-01

    The Python programming language allows objects and classes to respond dynamically to the execution environment. Most of this, however, is made possible through language hooks which by definition can not be optimized and thus tend to be slow. The PyPy implementation of Python includes a tracing just in time compiler (JIT), which allows similar dynamic responses but at the interpreter-, rather than the application-level. Therefore, it is possible to fully remove the hooks, leaving only the dynamic response, in the optimization stage for hot loops, if the types of interest are opened up to the JIT. A general opening up of types to the JIT, based on reflection information, has already been developed (cppyy). The work described in this paper takes it one step further by customizing access to ROOT I/O to the JIT, allowing for fully automatic optimizations.

  14. PB-AM: An open-source, fully analytical linear poisson-boltzmann solver.

    PubMed

    Felberg, Lisa E; Brookes, David H; Yap, Eng-Hui; Jurrus, Elizabeth; Baker, Nathan A; Head-Gordon, Teresa

    2017-06-05

    We present the open source distributed software package Poisson-Boltzmann Analytical Method (PB-AM), a fully analytical solution to the linearized PB equation, for molecules represented as non-overlapping spherical cavities. The PB-AM software package includes the generation of outputs files appropriate for visualization using visual molecular dynamics, a Brownian dynamics scheme that uses periodic boundary conditions to simulate dynamics, the ability to specify docking criteria, and offers two different kinetics schemes to evaluate biomolecular association rate constants. Given that PB-AM defines mutual polarization completely and accurately, it can be refactored as a many-body expansion to explore 2- and 3-body polarization. Additionally, the software has been integrated into the Adaptive Poisson-Boltzmann Solver (APBS) software package to make it more accessible to a larger group of scientists, educators, and students that are more familiar with the APBS framework. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  15. A comparative approach to closed-loop computation.

    PubMed

    Roth, E; Sponberg, S; Cowan, N J

    2014-04-01

    Neural computation is inescapably closed-loop: the nervous system processes sensory signals to shape motor output, and motor output consequently shapes sensory input. Technological advances have enabled neuroscientists to close, open, and alter feedback loops in a wide range of experimental preparations. The experimental capability of manipulating the topology-that is, how information can flow between subsystems-provides new opportunities to understand the mechanisms and computations underlying behavior. These experiments encompass a spectrum of approaches from fully open-loop, restrained preparations to the fully closed-loop character of free behavior. Control theory and system identification provide a clear computational framework for relating these experimental approaches. We describe recent progress and new directions for translating experiments at one level in this spectrum to predictions at another level. Operating across this spectrum can reveal new understanding of how low-level neural mechanisms relate to high-level function during closed-loop behavior. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Incidence and location of positive surgical margin among open, laparoscopic and robot-assisted radical prostatectomy in prostate cancer patients: a single institutional analysis.

    PubMed

    Koizumi, Atsushi; Narita, Shintaro; Nara, Taketoshi; Takayama, Koichiro; Kanda, Sohei; Numakura, Kazuyuki; Tsuruta, Hiroshi; Maeno, Atsushi; Huang, Mingguo; Saito, Mitsuru; Inoue, Takamitsu; Tsuchiya, Norihiko; Satoh, Shigeru; Nanjo, Hiroshi; Habuchi, Tomonori

    2018-06-19

    To evaluate the positive surgical margin rates and locations in radical prostatectomy among three surgical approaches, including open radical prostatectomy, laparoscopic radical prostatectomy and robot-assisted radical prostatectomy. We retrospectively reviewed clinical outcomes at our institution of 450 patients who received radical prostatectomy. Multiple surgeons were involved in the three approaches, and a single pathologist conducted the histopathological diagnoses. Positive surgical margin rates and locations among the three approaches were statistically assessed, and the risk factors of positive surgical margin were analyzed. This study included 127, 136 and 187 patients in the open radical prostatectomy, laparoscopic radical prostatectomy and robot-assisted radical prostatectomy groups, respectively. The positive surgical margin rates were 27.6% (open radical prostatectomy), 18.4% (laparoscopic radical prostatectomy) and 13.4% (robot-assisted radical prostatectomy). In propensity score-matched analyses, the positive surgical margin rate in the robot-assisted radical prostatectomy was significantly lower than that in the open radical prostatectomy, whereas there was no significant difference in the positive surgical margin rates between robot-assisted radical prostatectomy and laparoscopic radical prostatectomy. In the multivariable analysis, PSA level at diagnosis and surgical approach (open radical prostatectomy vs robot-assisted radical prostatectomy) were independent risk factors for positive surgical margin. The apex was the most common location of positive surgical margin in the open radical prostatectomy and laparoscopic radical prostatectomy groups, whereas the bladder neck was the most common location in the robot-assisted radical prostatectomy group. The significant difference of positive surgical margin locations continued after the propensity score adjustment. Robot-assisted radical prostatectomy may potentially achieve the lowest positive surgical margin rate among three surgical approaches. The bladder neck was the most common location of positive surgical margin in robot-assisted radical prostatectomy and apex in open radical prostatectomy and laparoscopic radical prostatectomy. Although robot-assisted radical prostatectomy may contribute to the reduction of positive surgical margin, dissection of the bladder neck requires careful attention to avoid positive surgical margins.

  17. Comparison of noncontact infrared and remote sensor thermometry in normal and dry eye patients.

    PubMed

    Singh, G; Singh Bhinder, H

    To evaluate the role of closed chamber infrared and remote sensor thermometry in normal and dry eye patients. The study was conducted on 51 dry eye cases (102 eyes), 26 men and 25 women aged 19 to 65 years (35.3614.36), and 51 normal (102 eyes) age- and sex-matched control subjects. The criteria for dry eye were Schirm e r-1 (<10 m/5 min), FTBUT (<10 sec), nd lissamine green score (>2). The remote sensor and infrared thermometry was done in losed chamber around the eye in closed and open eye positions. In normal eyes, closed chamber infrared thermometry recorded temperature 34.770.37 C in closed eye position and 35.020.39 C in open eye position as compared to 27.912.46 C in closed eye position and 28.012.46 C in open position with remote sensor thermometry. The difference in temperature from closed to open position was 0.250.90 C in infrared thermometry and 0.100.00 C with remote sensor thermometry, which was statistically significant (p<0.0000). In dry eye, the infrared therm o m e t ry recorded 35.080.61 C temperature in closed eye position and 35.530.63 C in open eye position as compared to 27.412.48 C in open and closed eye position with remote sensor thermometry. The difference in temperature from closed to open eye position was 0.450.14 C (p<0.0000) with infrared thermometry as compared to no change 0.000.00 C with remote sensor thermometry (p<0.0000). Remote sensor thermometry proved better for diagnosis of dry eye disease as it showed no change in temperature under closed chamber in closed and open position (p=0.0000). Infrared thermometry was better in recording the absolute temperature from any point on the eye.

  18. Comparison of noncontact infrared and remote sensor thermometry in normal and dry eye patients.

    PubMed

    Singh, G; Bhinder, H Singh

    2005-01-01

    To evaluate the role of closed chamber infrared and remote sensor thermometry in normal and dry eye patients. The study was conducted on 51 dry eye cases (102 eyes), 26 men and 25 women aged 19 to 65 years (35.36+/-14.36), and 51 normal (102 eyes) age- and sex-matched control subjects. The criteria for dry eye were Schirmer-1 (<10 m/5 min), FTBUT (<10 sec), nd lissamine green score (>2). The remote sensor and infrared thermometry was done in closed chamber around the eye in closed and open eye positions. In normal eyes, closed chamber infrared thermometry recorded temperature 34.77+/-0.37 degrees C in closed eye position and 35.02+/-0.39 degrees C in open eye position as compared to 27.91+/-2.46 degrees C in closed eye position and 28.01+/-2.46 degrees C in open position with remote sensor thermometry. The difference in temperature from closed to open position was 0.25+/-0.90 degrees C in infrared thermometry and 0.10+/-0.00 degrees C with remote sensor thermometry, which was statistically significant (p<0.0000). In dry eye, the infrared thermometry recorded 35.08+/-0.61 degrees C temperature in closed eye position and 35.53+/-0.63 degrees C in open eye position as compared to 27.41+/-2.48 degrees C in open and closed eye position with remote sensor thermometry. The difference in temperature from closed to open eye position was 0.45+/-0.14 degrees C (p<0.0000) with infrared thermometry as compared to no change 0.00+/-0.00 degrees C with remote sensor thermometry (p<0.0000). Remote sensor thermometry proved better for diagnosis of dry eye disease as it showed no change in temperature under closed chamber in closed and open position (p=0.0000). Infrared thermometry was better in recording the absolute temperature from any point on the eye.

  19. An Android based location service using GSMCellID and GPS to obtain a graphical guide to the nearest cash machine

    NASA Astrophysics Data System (ADS)

    Jacobsen, Jurma; Edlich, Stefan

    2009-02-01

    There is a broad range of potential useful mobile location-based applications. One crucial point seems to be to make them available to the public at large. This case illuminates the abilities of Android - the operating system for mobile devices - to fulfill this demand in the mashup way by use of some special geocoding web services and one integrated web service for getting the nearest cash machines data. It shows an exemplary approach for building mobile location-based mashups for everyone: 1. As a basis for reaching as many people as possible the open source Android OS is assumed to spread widely. 2. Everyone also means that the handset has not to be an expensive GPS device. This is realized by re-utilization of the existing GSM infrastructure with the Cell of Origin (COO) method which makes a lookup of the CellID in one of the growing web available CellID databases. Some of these databases are still undocumented and not yet published. Furthermore the Google Maps API for Mobile (GMM) and the open source counterpart OpenCellID are used. The user's current position localization via lookup of the closest cell to which the handset is currently connected to (COO) is not as precise as GPS, but appears to be sufficient for lots of applications. For this reason the GPS user is the most pleased one - for this user the system is fully automated. In contrary there could be some users who doesn't own a GPS cellular. This user should refine his/her location by one click on the map inside of the determined circular region. The users are then shown and guided by a path to the nearest cash machine by integrating Google Maps API with an overlay. Additionally, the GPS user can keep track of him- or herself by getting a frequently updated view via constantly requested precise GPS data for his or her position.

  20. Positively charged mini-protein Zbasic2 as a highly efficient silica binding module: opportunities for enzyme immobilization on unmodified silica supports.

    PubMed

    Bolivar, Juan M; Nidetzky, Bernd

    2012-07-03

    Silica is a highly attractive support material for protein immobilization in a wide range of biotechnological and biomedical-analytical applications. Without suitable derivatization, however, the silica surface is not generally usable for attachment of proteins. We show here that Z(basic2) (a three α-helix bundle mini-protein of 7 kDa size that exposes clustered positive charges from multiple arginine residues on one side) functions as highly efficient silica binding module (SBM), allowing chimeras of target protein with SBM to become very tightly attached to underivatized glass at physiological pH conditions. We used two enzymes, d-amino acid oxidase and sucrose phosphorylase, to demonstrate direct immobilization of Z(basic2) protein from complex biological samples with extremely high selectivity. Immobilized enzymes displayed full biological activity, suggesting that their binding to the glass surface had occurred in a preferred orientation via the SBM. We also show that charge complementarity was the main principle of affinity between SBM and glass surface, and Z(basic2) proteins were bound in a very strong, yet fully reversible manner, presumably through multipoint noncovalent interactions. Z(basic2) proteins were immobilized on porous glass in a loading of 30 mg protein/g support or higher, showing that attachment via the SBM combines excellent binding selectivity with a technically useful binding capacity. Therefore, Z(basic2) and silica constitute a fully orthogonal pair of binding module and insoluble support for oriented protein immobilization, and this opens up new opportunities for the application of silica-based materials in the development of supported heterogeneous biocatalysts.

  1. Valve assembly for use with high temperature and high pressure fluids

    DOEpatents

    De Feo, Angelo

    1982-01-01

    The valve assembly for use with high temperature and high pressure fluids has inner and outer spaced shells and a valve actuator support of inner and outer spaced members which are connected at their end portions to the inner and outer shells, respectively, to extend substantially normal to the longitudinal axis of the inner shell. A layer of resilient heat insulating material covers the outer surfaces of the inner shell and the inner actuator support member and is of a thickness to only occupy part of the spaces between the inner and outer shells and inner and outer actuator support members. The remaining portion of the space between the inner and outer shells and the space between the inner and outer members is substantially filled with a body of castable, rigid refractory material. A movable valve member is disposed in the inner shell. A valve actuator assembly is supported in the valve actuator support to extend into the inner shell for connection with the movable valve member for movement of the movable valve member to positions from a fully open to a fully closed position to control flow of fluid through the inner shell. An anchor mneans is disposed adjacent opposite sides of the axis of the valve actuator support and attached to the inner shell so that relative radial movement between the inner and outer shell is permitted by the layer of resilient heat insulating material and relative longitudinal movement of the inner shell to the outer shell is permitted in opposite directions from the anchor means to thereby maintain the functional integrity of the movable valve member by providing an area of the inner shell surrounding the movable valve member longitdinally stationary, but at the same time allowing radial movement.

  2. Open innovation at the Abbe School of Photonics

    NASA Astrophysics Data System (ADS)

    Helgert, Christian; Geiss, Reinhard; Nolte, Stefan; Eilenberger, Falk; Zakoth, David; Mauroner, Oliver; Pertsch, Thomas

    2017-08-01

    The Abbe School of Photonics (ASP) provides and coordinates the optics and photonics education of graduate and doctoral students at the Friedrich Schiller University in Jena, Germany. The internationalized Master's degree program is the key activity in training students in the optical sciences. The program is designed to provide them with the skills necessary to fill challenging positions in industry and academia. Here, an essential factor is ASP's close collaboration with more than 20 German photonics companies. To sustain these partners' future economic development, the availability of highly qualified employees is constantly required. Accordingly, these industrial partners, the European Union, the local state and the federal German government are strongly involved in the sustainable development of ASP's curriculum by both conceptual and financial engagements. The main goal is to promote the students' academic careers and job experience in the photonics industry as well as in academia. To open up the program to students from all over the world, all ASP lectures and courses are taught in English. ASP's qualification strategy is fully research-oriented and based on the principles of academic freedom, competitive research conditions and internationalization at all levels. The education program is complemented by a structured doctoral student support and a prestigious guest professorship program. Recently, ASP and partners have started a project to build an open photonics laboratory in order to foster innovative and co-creative processes. The idea follows well-established open innovation schemes e.g. in electronics. This Photon Garage (German: "Lichtwerkstatt") will bring together professionals and interested laymen from different backgrounds to approach pertinent challenges in photonics. Here, we will share our latest insights into the potentials and opportunities offered by this novel educative approach.

  3. Disease-causing mutations C277R and C277Y modify gating of human ClC-1 chloride channels in myotonia congenita

    PubMed Central

    Weinberger, Sebastian; Wojciechowski, Daniel; Sternberg, Damien; Lehmann-Horn, Frank; Jurkat-Rott, Karin; Becher, Toni; Begemann, Birgit; Fahlke, Christoph; Fischer, Martin

    2012-01-01

    Myotonia congenita is a genetic condition that is caused by mutations in the muscle chloride channel gene CLCN1 and characterized by delayed muscle relaxation and muscle stiffness. We here investigate the functional consequences of two novel disease-causing missense mutations, C277R and C277Y, using heterologous expression in HEK293T cells and patch clamp recording. Both mutations reduce macroscopic anion currents in transfected cells. Since hClC-1 is a double-barrelled anion channel, this reduction in current amplitude might be caused by altered gating of individual protopores or of joint openings and closing of both protopores. We used non-stationary noise analysis and single channel recordings to separate the mutants’ effects on individual and common gating processes. We found that C277Y inverts the voltage dependence and reduces the open probabilities of protopore and common gates resulting in decreases of absolute open probabilities of homodimeric channels to values below 3%. In heterodimeric channels, C277R and C277Y also reduce open probabilities and shift the common gate activation curve towards positive potentials. Moreover, C277Y modifies pore properties of hClC-1. It reduces single protopore current amplitudes to about two-thirds of wild-type values, and inverts the anion permeability sequence to I− = NO3− > Br− > Cl−. Our findings predict a dramatic reduction of the muscle fibre resting chloride conductance and thus fully explain the disease-causing effects of mutations C277R and C277Y. Moreover, they provide additional insights into the function of C277, a residue recently implicated in common gating of ClC channels. PMID:22641783

  4. Methylmercuric Chloride Induces Activation of Neuronal Stress Circuitry and Alters Exploratory Behavior in the Mouse

    PubMed Central

    Cooper, Joel F.

    2007-01-01

    Methylmercury (MeHg) is a well known neurotoxicant, responsible for neurological and cognitive alterations. However, there is very little information available on the effects of MeHg administration on activation of murine neuronal pathways involved in the stress response, and whether this is altered as a function of repeated exposure to MeHg. Moreover, interactions between MeHg and other psychogenic and inflammatory stressors have yet to be fully determined. Acute intraperitoneal (IP) exposure of male C57BL/6J mice to MeHg (2−8 mg/Kg) dose-dependently attenuated exploratory behavior in the open field in the presence and absence of a novel object. In addition, increased numbers of c-Fos immunoreactive cells appeared in response to acute IP and ICV MeHg within thalamic (PVA/PV), hypothalamic (PVN), central amygdaloid (CeC), septal and hippocampal (dentate gyrus) nuclei, medial bed nucleus (BSTm) and the locus coeruleus (Lc). The increase in c-Fos positive cells in response to acute IP and ICV MeHg did not appear to be influenced further by open field exposure. Repeated administration of MeHg led to an attenuation of most parameters of open field behavior altered by acute MeHg. However, increased c-Fos was significant in the CeC, Dg, supracapsular bed nucleus (BSTs), and Lc. Moreover, open field exposure after repeated treatments resulted in significant c-Fos responses in similar areas. Interestingly, 3 days after the final repeated MeHg dose (2 or 4 mg/kg) c-Fos increases to an immunogenic stressor (LPS) were not affected by MeHg pretreatment. These results demonstrate that systemic exposure to acute and repeated MeHg serves to activate the brain's stress circuitry, and furthermore appears to engage normal neuronal habituation processes. PMID:17764854

  5. Students in Fully Online Programs Report More Positive Attitudes toward Science than Students in Traditional, In-Person Programs

    ERIC Educational Resources Information Center

    Perera, Viranga; Mead, Chris; Buxner, Sanlyn; Lopatto, David; Horodyskyj, Lev; Semken, Steven; Anbar, Ariel D.

    2017-01-01

    Following the growth of online, higher-education courses, academic institutions are now offering fully online degree programs. Yet it is not clear how students who enroll in fully online degree programs are similar to those students who enroll in in-person ("traditional") degree programs. Because previous work has shown students'…

  6. 76 FR 7189 - Trunkline Gas Company, LLC; Notice of Request Under Blanket Authorization

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ... Ship Shoal T-27 Platform and appurtenant facilities located in Ship Shoal 274, Offshore Louisiana... as more fully set forth in the application, which is open to the public for inspection. The filing...

  7. 78 FR 53133 - Meeting of the National Commission on the Structure of the Air Force

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-28

    ... availability of space, the meeting is open to the public. The building is fully handicap accessible. Several public parking facilities are nearby. Photography and videography is permitted, but must be previously...

  8. 78 FR 56219 - Meeting of the National Commission on the Structure of the Air Force

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-12

    ... availability of space, the meeting is open to the public. The building is fully handicap accessible. Several public parking facilities are nearby. Photography and videography is permitted, but must be previously...

  9. The consistency of positive fully fuzzy linear system

    NASA Astrophysics Data System (ADS)

    Malkawi, Ghassan O.; Alfifi, Hassan Y.

    2017-11-01

    In this paper, the consistency of fuzziness of positive solution of the n × n fully fuzzy linear system (P - FFLS) is studied based on its associated linear system (P - ALS). That can consist of the whole entries of triangular fuzzy numbers in a linear system without fuzzy operations. The nature of solution is differentiated in case of fuzzy solution, non-fuzzy solution and fuzzy non-positive solution. Moreover, the analysis reveals that the P - ALS is applicable to provide the set of infinite number of solutions. Numerical examples are presented to illustrate the proposed analysis.

  10. Developed lower-positioned transverse ligament restricts eyelid opening and folding and determines Japanese as being with or without visible superior palpebral crease.

    PubMed

    Ban, Midori; Matsuo, Kiyoshi; Ban, Ryokuya; Yuzuriha, Shunsuke; Kaneko, Ai

    2013-01-01

    We have reported that a developed lower-positioned transverse ligament between the superior-medial orbital rim and the lateral orbital rim on the lateral horn in the lower orbital fat space antagonizes eyelid opening and folding in certain Japanese to produce narrow eye, no visible superior palpebral crease, and full eyelid. In this study, we confirmed relationship between development of the lower-positioned transverse ligament and presence of the superior palpebral crease. We evaluated whether (1) digital immobilization of eyebrow movement during eyelid opening and (2) a developed lower-positioned transverse ligament could classify Japanese subjects as being with or without visible superior palpebral crease. Digital immobilization of eyebrow movement restricted eyelid opening in all subjects without visible superior palpebral crease but did not restrict in any subject with visible superior palpebral crease. Macroscopic and microscopic evidence revealed that the lower-positioned transverse ligament behind the lower orbital septum in subjects without visible superior palpebral crease was significantly more developed than that in subjects with visible superior palpebral crease. Since a developed lower-positioned transverse ligament antagonizes opening and folding of the anterior lamella of the upper eyelid in subjects without visible superior palpebral crease, these individuals open their eyelids by lifting the eyebrow with the anterior lamella and the lower-positioned transverse ligament owing to increased tonic contraction of the frontalis muscle, in addition to the retractile force of the levator aponeurotic expansions. In subjects with visible superior palpebral crease, the undeveloped lower-positioned transverse ligament does not antagonize opening and folding of the anterior lamella, and so they open their eyelids by folding the anterior lamella on the superior palpebral crease via the retractile force of the levator aponeurotic expansions.

  11. Developed Lower-Positioned Transverse Ligament Restricts Eyelid Opening and Folding and Determines Japanese as Being With or Without Visible Superior Palpebral Crease

    PubMed Central

    Ban, Midori; Matsuo, Kiyoshi; Ban, Ryokuya; Yuzuriha, Shunsuke; Kaneko, Ai

    2013-01-01

    Introduction: We have reported that a developed lower-positioned transverse ligament between the superior-medial orbital rim and the lateral orbital rim on the lateral horn in the lower orbital fat space antagonizes eyelid opening and folding in certain Japanese to produce narrow eye, no visible superior palpebral crease, and full eyelid. In this study, we confirmed relationship between development of the lower-positioned transverse ligament and presence of the superior palpebral crease. Methods: We evaluated whether (1) digital immobilization of eyebrow movement during eyelid opening and (2) a developed lower-positioned transverse ligament could classify Japanese subjects as being with or without visible superior palpebral crease. Results: Digital immobilization of eyebrow movement restricted eyelid opening in all subjects without visible superior palpebral crease but did not restrict in any subject with visible superior palpebral crease. Macroscopic and microscopic evidence revealed that the lower-positioned transverse ligament behind the lower orbital septum in subjects without visible superior palpebral crease was significantly more developed than that in subjects with visible superior palpebral crease. Conclusions: Since a developed lower-positioned transverse ligament antagonizes opening and folding of the anterior lamella of the upper eyelid in subjects without visible superior palpebral crease, these individuals open their eyelids by lifting the eyebrow with the anterior lamella and the lower-positioned transverse ligament owing to increased tonic contraction of the frontalis muscle, in addition to the retractile force of the levator aponeurotic expansions. In subjects with visible superior palpebral crease, the undeveloped lower-positioned transverse ligament does not antagonize opening and folding of the anterior lamella, and so they open their eyelids by folding the anterior lamella on the superior palpebral crease via the retractile force of the levator aponeurotic expansions. PMID:23943676

  12. Electrostatic shape-shifting ion optics

    DOEpatents

    Dahl, David A.; Scott, Jill R.; Appelhans, Anthony D.

    2006-05-02

    Electrostatic shape-shifting ion optics includes an outer electrode that defines an interior region between first and second opposed open ends. A first inner electrode is positioned within the interior region of the outer electrode at about the first open end. A second inner electrode is positioned within the interior region of the outer electrode at about the second open end. A first end cap electrode is positioned at about a first open end of the first inner electrode so that the first end cap electrode substantially encloses the first open end of the first inner electrode. A second end cap electrode is positioned at about a second open end of the second inner electrode so that the second end cap electrode substantially encloses the second open end of the second inner electrode. A voltage source operatively connected to each of the electrodes applies voltage functions to each of the electrodes to produce an electric field within an interior space enclosed by the electrodes.

  13. Fostering community understanding of sufficient benefit and early stopping for a phase 2B HIV prevention clinical trial in Africa.

    PubMed

    White, Rhonda; Chileshe, Modesta; Dawson, Liza; Donnell, Deborah; Hillier, Sharon; Morar, Neetha; Noguchi, Lisa; Dixon, Dennis

    2011-02-01

    Most trials of interventions are designed to address the traditional null hypothesis of no benefit. VOICE, a phase 2B HIV prevention trial funded by NIH and conducted in Africa, is designed to assess if the intervention will prevent a substantial fraction of infections. Planned interim analysis may provide conclusive evidence against the traditional null hypothesis without establishing substantial benefit. At this interim point, the Data and Safety Monitoring Board would then face the dilemma of knowing the product has some positive effect, but perhaps not as great an effect as the protocol has declared necessary. In March 2008, NIH program staff recommended that the VOICE protocol team discuss the stopping rules with stakeholders prior to initiating the protocol. The goals of the workshop were to inform community representatives about the potential ethical dilemma associated with stopping rules and engage in dialogue about these issues. We describe the resulting community consultation and summarize the outcomes. A 2-day workshop was convened with the goal of having a clear and transparent consultation with the stakeholders around the question, 'Given emerging evidence that a product could prevent some infections, would the community support a decision to continue accruing to the trial?' Participants included research staff and community stakeholders. Lectures with visual aids, discussions, and exercises using interactive learning tasks were used, with a focus on statistics and interpreting data from trials, particularly interim data. Results of oral and written evaluations by participants were reviewed. The feedback was mostly positive, with some residual confusion regarding statistical concepts. However, discussions with attendees later revealed that not all felt prepared to engage fully in the workshop. This was the presenters' first experience facilitating a formal discussion with an audience that had no advanced science, research, or mathematics training. Community representatives' concern regarding speaking for their communities without consulting them also created a challenge for the workshop. Open discussion around trial stopping rules requires that all discussants have an understanding of trial design concepts and feel a sense of empowerment to ask and answer questions. The VOICE CWG workshop was a first step toward the goal of open discussion regarding trial stopping rules and interim results for the study; however, ongoing education and dialogue must occur to ensure that all stakeholders fully participate in the process.

  14. openQ*D simulation code for QCD+QED

    NASA Astrophysics Data System (ADS)

    Campos, Isabel; Fritzsch, Patrick; Hansen, Martin; Krstić Marinković, Marina; Patella, Agostino; Ramos, Alberto; Tantalo, Nazario

    2018-03-01

    The openQ*D code for the simulation of QCD+QED with C* boundary conditions is presented. This code is based on openQCD-1.6, from which it inherits the core features that ensure its efficiency: the locally-deflated SAP-preconditioned GCR solver, the twisted-mass frequency splitting of the fermion action, the multilevel integrator, the 4th order OMF integrator, the SSE/AVX intrinsics, etc. The photon field is treated as fully dynamical and C* boundary conditions can be chosen in the spatial directions. We discuss the main features of openQ*D, and we show basic test results and performance analysis. An alpha version of this code is publicly available and can be downloaded from http://rcstar.web.cern.ch/.

  15. Vocal specialization through tracheal elongation in an extinct Miocene pheasant from China.

    PubMed

    Li, Zhiheng; Clarke, Julia A; Eliason, Chad M; Stidham, Thomas A; Deng, Tao; Zhou, Zhonghe

    2018-05-25

    Modifications to the upper vocal tract involving hyper-elongated tracheae have evolved many times within crown birds, and their evolution has been linked to a 'size exaggeration' hypothesis in acoustic signaling and communication, whereby smaller-sized birds can produce louder sounds. A fossil skeleton of a new extinct species of wildfowl (Galliformes: Phasianidae) from the late Miocene of China, preserves an elongated, coiled trachea that represents the oldest fossil record of this vocal modification in birds and the first documentation of its evolution within pheasants. The phylogenetic position of this species within Phasianidae has not been fully resolved, but appears to document a separate independent origination of this vocal modification within Galliformes. The fossil preserves a coiled section of the trachea and other remains supporting a tracheal length longer than the bird's body. This extinct species likely produced vocalizations with a lower fundamental frequency and reduced harmonics compared to similarly-sized pheasants. The independent evolution of this vocal feature in galliforms living in both open and closed habitats does not appear to be correlated with other factors of biology or its open savanna-like habitat. Features present in the fossil that are typically associated with sexual dimorphism suggest that sexual selection may have resulted in the evolution of both the morphology and vocalization mechanism in this extinct species.

  16. Balancing the competing requirements of saltatorial and fossorial specialisation: burrowing costs in the spinifex hopping mouse, Notomys alexis.

    PubMed

    White, Craig R; Matthews, Philip G D; Seymour, Roger S

    2006-06-01

    Semi-fossorial animals (burrowing surface foragers) need to balance the competing morphological requirements of terrestrial and burrowing locomotion. These species rarely show the same degree of claw, forelimb and pectoral girdle structural development that fully fossorial forms (burrowing subterranean foragers) do, but nevertheless invest considerable amounts of energy in burrow systems. The compromise between terrestrial and burrowing locomotion was investigated by measuring net costs of burrowing and pedestrian transport in the spinifex hopping mouse, Notomys alexis, a species that forages in open areas in arid environments and is adapted for saltatorial locomotion. The net cost of transport by burrowing of hopping mice was found to be more expensive than for specialised fossorial species, and burrows were estimated to represent an energy investment equivalent to the terrestrial locomotion expected to be incurred in 17-100 days. A phylogenetically independent-contrasts approach revealed that morphological specialisation for burrowing was associated with low maximum running speeds in fossorial mammals and, for non-fossorial rodents and marsupials, maximum running speed was positively correlated with an index of habitat structure that ranged from arboreal to open desert. The high terrestrial speeds attainable by this semi-fossorial species by saltatory locomotion apparently outweigh the energetic savings that would be associated with burrowing specialisation.

  17. Continuum Mechanical and Computational Aspects of Material Behavior

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fried, Eliot

    2015-02-11

    Fluid flows are typically classified as laminar or turbulent. While the glassy, regular flow of water from a slightly opened tap is laminar, the sinuous, irregular flow of water from a fully opened tap is turbulent. In a laminar flow, the velocity and other relevant fields are deterministic functions of position and time. Photos taken at different times, no matter how far removed, of steady laminar flow from a tap will be identical. In a turbulent flow, the velocity and other relevant fields manifest complex spatial and temporal fluctuations. A video of steady turbulent flow from a tap will exhibitmore » a constantly changing pattern and many length and time scales. In nature and technology, laminar flows are more the exception than the rule. Fluvial, oceanic, pyroclastic, atmospheric, and interstellar flows are generally turbulent, as are the flows of blood through the left ventricle and air in the lungs. Flows around land, sea, and air vehicles and through pipelines, heating, cooling, and ventilation systems are generally turbulent, as are most flows involved in industrial processing, combustion, chemical reactions, and crystal growth. Over the past year, a significant portion of our research activity has focused on numerical studies of Navier-Stokes-αβ model and extensions thereof. Our results regarding these and other approaches to turbulence modeling are described below.« less

  18. 78 FR 61342 - Meeting of the National Commission on the Structure of the Air Force

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-03

    ... availability of space, the meeting is open to the public. The building is fully handicap accessible. There is parking at the Westover Metropolitan Airport. More information about the hearing space can be found at...

  19. Multidimensional Perfectionism and Rogerian Personality Constructs

    ERIC Educational Resources Information Center

    Ashby, Jeffrey S.; Rahotep, Simone S.; Martin, James L.

    2005-01-01

    The Feelings, Reactions, and Beliefs Survey (FRBS) was administered to 141 undergraduate students to evaluate differences in Rogerian personality constructs among adaptive, maladaptive, and nonperfectionists. The groups differed significantly on 5 FRBS subscales: Fully Functioning Person, Struggling With Feelings of Inferiority, Openness to…

  20. 78 FR 12060 - Sunshine Act Meeting; Open Commission Meeting Wednesday, February 20, 2013

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-21

    ... accelerate the growth and expansion of new Wi-Fi technology offering consumers faster speeds and less network congestion at Wi-Fi hot spots. The meeting site is fully accessible to people using wheelchairs or other...

  1. Ocular Vestibular Evoked Myogenic Potentials in Response to Three Test Positions and Two Frequencies

    PubMed Central

    Todai, Janvi K.; Congdon, Sharon L.; Sangi-Haghpeykar, Haleh; Cohen, Helen S.

    2014-01-01

    Objective To determine how eye closure, test positions, and stimulus frequencies influence ocular vestibular evoked myogenic potentials. Study Design This study used a within-subjects repeated measures design. Methods Twenty asymptomatic subjects were each tested on ocular vestibular evoked myogenic potentials in three head/eye conditions at 500 Hz and 1000 Hz using air-conducted sound: 1) Sitting upright, head erect, eyes open, looking up. 2) Lying supine, neck flexed 30 degrees, eyes open and looking up. 3) Lying supine, neck flexed 30 degrees, eyes closed and relaxed. Four dependent variables measured were n10, p16, amplitude, and threshold. Results The supine position/ eyes open was comparable to sitting/ eyes open and better than supine/ eyes closed. Eyes closed resulted in lower amplitude, higher threshold, and prolonged latency. Significantly fewer subjects provided responses with eyes closed than with eyes open. No significant differences were found between both eyes open conditions. Both n10 and p16 were lower at 1000 Hz than at 500 Hz. Amplitude and threshold were higher at 1000 Hz than at 500 Hz. Conclusion Supine eyes open is a reliable alternative to sitting eyes open in patients who cannot maintain a seated position. Testing at 1000 Hz provides a larger response with a faster onset that fatigues faster than at 500 Hz. The increased variability and decreased response in the eyes closed position suggest that the eyes closed position is not reliable. PMID:24178911

  2. A Dynamic Nuclear Polarization spectrometer at 95 GHz/144 MHz with EPR and NMR excitation and detection capabilities.

    PubMed

    Feintuch, Akiva; Shimon, Daphna; Hovav, Yonatan; Banerjee, Debamalya; Kaminker, Ilia; Lipkin, Yaacov; Zibzener, Koby; Epel, Boris; Vega, Shimon; Goldfarb, Daniella

    2011-04-01

    A spectrometer specifically designed for systematic studies of the spin dynamics underlying Dynamic Nuclear Polarization (DNP) in solids at low temperatures is described. The spectrometer functions as a fully operational NMR spectrometer (144 MHz) and pulse EPR spectrometer (95 GHz) with a microwave (MW) power of up to 300 mW at the sample position, generating a MW B(1) field as high as 800 KHz. The combined NMR/EPR probe comprises of an open-structure horn-reflector configuration that functions as a low Q EPR cavity and an RF coil that can accommodate a 30-50 μl sample tube. The performance of the spectrometer is demonstrated through some basic pulsed EPR experiments, such as echo-detected EPR, saturation recovery and nutation measurements, that enable quantification of the actual intensity of MW irradiation at the position of the sample. In addition, DNP enhanced NMR signals of samples containing TEMPO and trityl are followed as a function of the MW frequency. Buildup curves of the nuclear polarization are recorded as a function of the microwave irradiation time period at different temperatures and for different MW powers. Copyright © 2011 Elsevier Inc. All rights reserved.

  3. KSC-03pd0771

    NASA Image and Video Library

    2003-03-20

    KENNEDY SPACE CENTER, Fla. - The solar arrays on the Mars Exploration Rover-2 (MER-2) are fully opened during a test in the Payload Hazardous Servicing Facility. Set to launch in Spring 2003, the MER Mission will consist of two identical rovers designed to cover roughly 110 yards each Martian day. Each rover will carry five scientific instruments that will allow it to search for evidence of liquid water that may have been present in the planet's past. The rovers will be identical to each other, but will land at different regions of Mars. The first rover has a launch window opening May 30, and the second rover a window opening June 25, 2003.

  4. Open-source tools for data mining.

    PubMed

    Zupan, Blaz; Demsar, Janez

    2008-03-01

    With a growing volume of biomedical databases and repositories, the need to develop a set of tools to address their analysis and support knowledge discovery is becoming acute. The data mining community has developed a substantial set of techniques for computational treatment of these data. In this article, we discuss the evolution of open-source toolboxes that data mining researchers and enthusiasts have developed over the span of a few decades and review several currently available open-source data mining suites. The approaches we review are diverse in data mining methods and user interfaces and also demonstrate that the field and its tools are ready to be fully exploited in biomedical research.

  5. Developing a Knowledge Base for Detection of Powertrain Failures by Reversibly Seeding Engine Faults

    DTIC Science & Technology

    2010-08-01

    output, in terms of torque, speed and heat losses, can be accurately performed. Our investigation has focused on creating faulty operating conditions...open loop case”, used to measure the engine output for a given driver demand, for instance, 100% pedal); in the other case (“ closed loop ”) engine...could be changed in nine steps ranging from completely open to fully closed . Another butterfly valve was placed at the end of the exhaust pipe before

  6. Assessment of preparation time with fully-liquid versus non-fully liquid paediatric hexavalent vaccines. A time and motion study.

    PubMed

    De Coster, Ilse; Fournie, Xavier; Faure, Céline; Ziani, Eddy; Nicolas, Laurence; Soubeyrand, Benoit; Van Damme, Pierre

    2015-07-31

    Simplified vaccine preparation steps would save time and reduce potential immunisation errors. The aim of the study was to assess vaccine preparation time with fully-liquid hexavalent vaccine (DTaP-IPV-HB-PRP-T, Sanofi Pasteur MSD) versus non-fully liquid hexavalent vaccine that needs reconstitution (DTPa-HBV-IPV/Hib, GlaxoSmithKline Biologicals). Ninety-six Health Care Professionals (HCPs) participated in a randomised, cross-over, open-label, time and motion study in Belgium (2014). HCPs prepared each vaccine in a cross-over manner with a wash-out period of 3-5min. An independent nurse assessed preparation time and immunisation errors by systematic review of the videos. HCPs satisfaction and preference were evaluated by a self-administered questionnaire. Average preparation time was 36s for the fully-liquid vaccine and 70.5s for the non-fully liquid vaccine. The time saved using the fully-liquid vaccine was 34.5s (p≤0.001). On 192 preparations, 57 immunisation errors occurred: 47 in the non-fully liquid vaccine group (including one missing reconstitution of Hib component), 10 in the fully-liquid vaccine group. 71.9% of HCPs were very or somewhat satisfied with the ease of handling of both vaccines; 66.7% and 67.7% were very or somewhat satisfied with speed of preparation in the fully-liquid vaccine and the non-fully liquid vaccine groups, respectively. Almost all HCPs (97.6%) stated they would prefer the use of the fully-liquid vaccine in their daily practice. Preparation of a fully-liquid hexavalent vaccine can be completed in half the time necessary to prepare a non-fully liquid vaccine. The simplicity of the fully-liquid hexavalent vaccine preparation helps optimise reduction of immunisation errors. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  7. Long-term monitoring of the HPC Charenton Canal Bridge.

    DOT National Transportation Integrated Search

    2011-08-01

    The report contains long-term monitoring data collection and analysis of the first fully high : performance concrete (HPC) bridge in Louisiana, the Charenton Canal Bridge. The design of this : bridge started in 1997, and it was built and opened to tr...

  8. 40 CFR 63.1292 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... water. Flexible polyurethane foams are open-celled, permit the passage of air through the foam, and... Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1292 Definitions. All... for the purposes of this subpart. Cured foam means flexible polyurethane foam with fully developed...

  9. 40 CFR 63.1292 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... water. Flexible polyurethane foams are open-celled, permit the passage of air through the foam, and... Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1292 Definitions. All terms used in... purposes of this subpart. Cured foam means flexible polyurethane foam with fully developed physical...

  10. 40 CFR 63.1292 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... water. Flexible polyurethane foams are open-celled, permit the passage of air through the foam, and... Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1292 Definitions. All... for the purposes of this subpart. Cured foam means flexible polyurethane foam with fully developed...

  11. 40 CFR 63.1292 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... water. Flexible polyurethane foams are open-celled, permit the passage of air through the foam, and... Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1292 Definitions. All terms used in... purposes of this subpart. Cured foam means flexible polyurethane foam with fully developed physical...

  12. The Role of Collaborations in Sustaining an Evidence-Based Intervention to Reduce Child Neglect

    PubMed Central

    Green, Amy E.; Trott, Elise; Willging, Cathleen E.; Finn, Natalie K.; Ehrhart, Mark G.; Aarons, Gregory A.

    2016-01-01

    Child neglect is the most prevalent form of child maltreatment and represents 79.5% of open child-welfare cases. A recent study found the evidence-based intervention (EBI) SafeCare® (SC) to significantly reduce child neglect recidivism rates. To fully capitalize on the effectiveness of such EBIs, service systems must engage in successful implementation and sustainment; however, little is known regarding what factors influence EBI sustainment. Collaborations among stakeholders are suggested as a means for facilitating EBI implementation and sustainment. This study combines descriptive quantitative survey data with qualitative interview and focus group findings to examine the role of collaboration within the context of public-private partnerships in 11 child welfare systems implementing SC. Participants included administrators of government child welfare systems and community-based organizations, as well as supervisors, coaches, and home visitors of the SC program. Sites were classified as fully-, partially-, and non-sustaining based on implementation fidelity. One-way analysis of variance was used to examine differences in stakeholder reported Effective Collaboration scores across fully-sustaining, partially-sustaining, and non-sustaining sites. Qualitative transcripts were analyzed via open and focused coding to identify the commonality, diversity, and complexity of collaborations involved in implementing and sustaining SC. Fully-sustaining sites reported significantly greater levels of effective collaboration than non-sustaining sites. Key themes described by SC stakeholders included shared vision, building on existing relationships, academic support, problem solving and resource sharing, and maintaining collaborations over time. Both quantitative and qualitative results converge in highlighting the importance of effective collaboration in EBI sustainment in child welfare service systems. PMID:26712422

  13. A Low-mass Exoplanet Candidate Detected by K2 Transiting the Praesepe M Dwarf JS 183

    NASA Astrophysics Data System (ADS)

    Pepper, Joshua; Gillen, Ed; Parviainen, Hannu; Hillenbrand, Lynne A.; Cody, Ann Marie; Aigrain, Suzanne; Stauffer, John; Vrba, Frederick J.; David, Trevor; Lillo-Box, Jorge; Stassun, Keivan G.; Conroy, Kyle E.; Pope, Benjamin J. S.; Barrado, David

    2017-04-01

    We report the discovery of a repeating photometric signal from a low-mass member of the Praesepe open cluster that we interpret as a Neptune-sized transiting planet. The star is JS 183 (HSHJ 163, EPIC 211916756), with T eff = 3325 ± 100 K, M * = 0.44 ± 0.04 M ⊙, R * = 0.44 ± 0.03 R ⊙, and {log}{g}* = 4.82+/- 0.06. The planet has an orbital period of 10.134588 days and a radius of R P = 0.32 ± 0.02 R J. Since the star is faint at V = 16.5 and J = 13.3, we are unable to obtain a measured radial velocity orbit, but we can constrain the companion mass to below about 1.7 M J, and thus well below the planetary boundary. JS 183b (since designated as K2-95b) is the second transiting planet found with K2 that resides in a several-hundred-megayear open cluster; both planets orbit mid-M dwarf stars and are approximately Neptune sized. With a well-determined stellar density from the planetary transit, and with an independently known metallicity from its cluster membership, JS 183 provides a particularly valuable test of stellar models at the fully convective boundary. We find that JS 183 is the lowest-density transit host known at the fully convective boundary, and that its very low density is consistent with current models of stars just above the fully convective boundary but in tension with the models just below the fully convective boundary.

  14. Fully gapped superconductivity in single crystals of noncentrosymmetric Re6Zr with broken time-reversal symmetry

    NASA Astrophysics Data System (ADS)

    Pang, G. M.; Nie, Z. Y.; Wang, A.; Singh, D.; Xie, W.; Jiang, W. B.; Chen, Y.; Singh, R. P.; Smidman, M.; Yuan, H. Q.

    2018-06-01

    The noncentrosymmetric superconductor Re6Zr has attracted much interest due to the observation of broken time-reversal symmetry in the superconducting state. Here we report an investigation of the superconducting gap structure of Re6Zr single crystals by measuring the magnetic penetration depth shift Δ λ (T ) and electronic specific heat Ce(T ) . Δ λ (T ) exhibits an exponential temperature dependence behavior for T ≪Tc , which indicates a fully open superconducting gap. Our analysis shows that a single gap s -wave model is sufficient to describe both the superfluid density ρs(T ) and Ce(T ) results, with a fitted gap magnitude larger than the weak coupling BCS value, providing evidence for fully gapped superconductivity in Re6Zr with moderate coupling.

  15. Open Education as a "Heterotopia of Desire"

    ERIC Educational Resources Information Center

    Gourlay, Lesley

    2015-01-01

    The movement towards "openness" in education has tended to position itself as inherently democratising, radical, egalitarian and critical of powerful gatekeepers to learning. While "openness" is often positioned as a critique, I will argue that its mainstream discourses--while appearing to oppose large-scale operations of…

  16. Two-dimensional correlation and codistribution spectroscopy (2DCOS and 2DCDS) analyses of time-dependent ATR IR spectra of d-glucose anomers undergoing mutarotation process in water.

    PubMed

    Noda, Isao

    2018-05-15

    Two cyclic diastereoisomeric structures, known as α- and β-anomers of d-glucose with different configurations around C1 with OH groups in axial or equitroial positions, undergo the mutarotation conversion to each other in water. Two-dimensional correlation and codistribution spectroscopy (2DCOS and 2DCDS) analyses were applied to the time-dependent ATR IR spectra of aqueous solutions of α- and β-d-glucose undergoing such mutarotation conversion. 2DCOS analysis reveals that the increase and decrease in the IR intensities after the dissolution of α- or β-d-glucose are not fully synchronized, suggesting the mutarotation of d-glucose in water is not a simple binary conversion process but a multi-step reaction involving an intermediate species with a finite and observable concentration level and lifetime. 2DCDS analysis of the time-dependent ATR IR spectra clearly demonstrated the presence of intermediate species contributing to the band positions overlapped close to bands for α- and β-d-glucose. The fact that band positions identified for the intermediate species for α- to β-d-glucose conversion are the same for the reverse reaction suggests that they arise from the same species, most likely the open-ring structure produced by the hydrolysis. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. 32 CFR 104.6 - Procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... necessary experience to qualify for key senior leadership positions shall be used judiciously, and the necessary experience and projected key leadership positions fully documented. This authority shall not be...

  18. Helical unwinding and side-chain unlocking unravel the outward open conformation of the melibiose transporter

    NASA Astrophysics Data System (ADS)

    Wang, Li-Ying; Ravi, Vidhya M.; Leblanc, Gérard; Padrós, Esteve; Cladera, Josep; Perálvarez-Marín, Alex

    2016-09-01

    Molecular dynamics simulations have been used to study the alternate access mechanism of the melibiose transporter from Escherichia coli. Starting from the outward-facing partially occluded form, 2 out of 12 simulations produced an outward full open form and one partially open, whereas the rest yielded fully or partially occluded forms. The shape of the outward-open form resembles other outward-open conformations of secondary transporters. During the transporter opening, conformational changes in some loops are followed by changes in the periplasm region of transmembrane helix 7. Helical curvature relaxation and unlocking of hydrophobic and ionic locks promote the outward opening of the transporter making accessible the substrate binding site. In particular, FRET studies on mutants of conserved aromatic residues of extracellular loop 4 showed lack of substrate binding, emphasizing the importance of this loop for making crucial interactions that control the opening of the periplasmic side. This study indicates that the alternate access mechanism for the melibiose transporter fits better into a flexible gating mechanism rather than the archetypical helical rigid-body rocker-switch mechanism.

  19. Blue straggler stars: lessons from open clusters.

    NASA Astrophysics Data System (ADS)

    Geller, Aaron M.

    Open clusters enable a deep dive into blue straggler characteristics. Recent work shows that the binary properties (frequency, orbital elements and companion masses and evolutionary states) of the blue stragglers are the most important diagnostic for determining their origins. To date the multi-epoch radial-velocity observations necessary for characterizing these blue straggler binaries have only been carried out in open clusters. In this paper, I highlight recent results in the open clusters NGC 188, NGC 2682 (M67) and NGC 6819. The characteristics of many of the blue stragglers in these open clusters point directly to origins through mass transfer from an evolved donor star. Additionally, a handful of blue stragglers show clear signatures of past dynamical encounters. These comprehensive, diverse and detailed observations also reveal important challenges for blue straggler formation models (and particularly the mass-transfer channel), which we must overcome to fully understand the origins of blue straggler stars and other mass-transfer products.

  20. The onset of visual experience gates auditory cortex critical periods

    PubMed Central

    Mowery, Todd M.; Kotak, Vibhakar C.; Sanes, Dan H.

    2016-01-01

    Sensory systems influence one another during development and deprivation can lead to cross-modal plasticity. As auditory function begins before vision, we investigate the effect of manipulating visual experience during auditory cortex critical periods (CPs) by assessing the influence of early, normal and delayed eyelid opening on hearing loss-induced changes to membrane and inhibitory synaptic properties. Early eyelid opening closes the auditory cortex CPs precociously and dark rearing prevents this effect. In contrast, delayed eyelid opening extends the auditory cortex CPs by several additional days. The CP for recovery from hearing loss is also closed prematurely by early eyelid opening and extended by delayed eyelid opening. Furthermore, when coupled with transient hearing loss that animals normally fully recover from, very early visual experience leads to inhibitory deficits that persist into adulthood. Finally, we demonstrate a functional projection from the visual to auditory cortex that could mediate these effects. PMID:26786281

  1. Lightweight scheduling of elastic analysis containers in a competitive cloud environment: a Docked Analysis Facility for ALICE

    NASA Astrophysics Data System (ADS)

    Berzano, D.; Blomer, J.; Buncic, P.; Charalampidis, I.; Ganis, G.; Meusel, R.

    2015-12-01

    During the last years, several Grid computing centres chose virtualization as a better way to manage diverse use cases with self-consistent environments on the same bare infrastructure. The maturity of control interfaces (such as OpenNebula and OpenStack) opened the possibility to easily change the amount of resources assigned to each use case by simply turning on and off virtual machines. Some of those private clouds use, in production, copies of the Virtual Analysis Facility, a fully virtualized and self-contained batch analysis cluster capable of expanding and shrinking automatically upon need: however, resources starvation occurs frequently as expansion has to compete with other virtual machines running long-living batch jobs. Such batch nodes cannot relinquish their resources in a timely fashion: the more jobs they run, the longer it takes to drain them and shut off, and making one-job virtual machines introduces a non-negligible virtualization overhead. By improving several components of the Virtual Analysis Facility we have realized an experimental “Docked” Analysis Facility for ALICE, which leverages containers instead of virtual machines for providing performance and security isolation. We will present the techniques we have used to address practical problems, such as software provisioning through CVMFS, as well as our considerations on the maturity of containers for High Performance Computing. As the abstraction layer is thinner, our Docked Analysis Facilities may feature a more fine-grained sizing, down to single-job node containers: we will show how this approach will positively impact automatic cluster resizing by deploying lightweight pilot containers instead of replacing central queue polls.

  2. pyOpenMS: a Python-based interface to the OpenMS mass-spectrometry algorithm library.

    PubMed

    Röst, Hannes L; Schmitt, Uwe; Aebersold, Ruedi; Malmström, Lars

    2014-01-01

    pyOpenMS is an open-source, Python-based interface to the C++ OpenMS library, providing facile access to a feature-rich, open-source algorithm library for MS-based proteomics analysis. It contains Python bindings that allow raw access to the data structures and algorithms implemented in OpenMS, specifically those for file access (mzXML, mzML, TraML, mzIdentML among others), basic signal processing (smoothing, filtering, de-isotoping, and peak-picking) and complex data analysis (including label-free, SILAC, iTRAQ, and SWATH analysis tools). pyOpenMS thus allows fast prototyping and efficient workflow development in a fully interactive manner (using the interactive Python interpreter) and is also ideally suited for researchers not proficient in C++. In addition, our code to wrap a complex C++ library is completely open-source, allowing other projects to create similar bindings with ease. The pyOpenMS framework is freely available at https://pypi.python.org/pypi/pyopenms while the autowrap tool to create Cython code automatically is available at https://pypi.python.org/pypi/autowrap (both released under the 3-clause BSD licence). © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Revisiting the Fully Automated Double-Ring Infiltrometer Using Open-Source Electronics

    EPA Science Inventory

    The double-ring infiltrometer (DRI) is commonly used for measuring soil hydraulic conductivity. However, constant-head DRI tests typically involve the use of Mariotte tubes, which can be problematic to set-up, and time-consuming to maintain and monitor during infiltration tests....

  4. Assessment and Accreditation for Languages: The Emerging Consensus?

    ERIC Educational Resources Information Center

    Hubner, Anke, Ed.; Ibarz, Toni, Ed.; Laviosa, Sara, Ed.

    Chapter titles include the following: "Language Teaching, Accreditation and the Social Purpose of Adult Education" (Liam Kane); "Student Attitudes to Learning, Assessment and Accreditation" (Fran Beaton); "Assessment on a Fully Accredited Open Language Programme: Achieving Beneficial Backwash in a Standardised Scheme" (Dounia Bissar); "Introducing…

  5. Quantum simulation of a quantum stochastic walk

    NASA Astrophysics Data System (ADS)

    Govia, Luke C. G.; Taketani, Bruno G.; Schuhmacher, Peter K.; Wilhelm, Frank K.

    2017-03-01

    The study of quantum walks has been shown to have a wide range of applications in areas such as artificial intelligence, the study of biological processes, and quantum transport. The quantum stochastic walk (QSW), which allows for incoherent movement of the walker, and therefore, directionality, is a generalization on the fully coherent quantum walk. While a QSW can always be described in Lindblad formalism, this does not mean that it can be microscopically derived in the standard weak-coupling limit under the Born-Markov approximation. This restricts the class of QSWs that can be experimentally realized in a simple manner. To circumvent this restriction, we introduce a technique to simulate open system evolution on a fully coherent quantum computer, using a quantum trajectories style approach. We apply this technique to a broad class of QSWs, and show that they can be simulated with minimal experimental resources. Our work opens the path towards the experimental realization of QSWs on large graphs with existing quantum technologies.

  6. Fully On-line Introductory Physics with a Lab

    NASA Astrophysics Data System (ADS)

    Schatz, Michael

    We describe the development and implementation of a college-level introductory physics (mechanics) course and laboratory that is suited for both on-campus and on-line environments. The course emphasizes a ``Your World is Your Lab'' approach whereby students first examine and capture on video (using cellphones) motion in their immediate surroundings, and then use free, open-source software both to extract data from the video and to apply physics principles to build models that describe, predict, and visualize the observations. Each student reports findings by creating a video lab report and posting it online; these video lab reports are then distributed to the rest of the class for peer review. In this talk, we will discuss the student and instructor experiences in courses offered to three distinct audiences in different venues: (1) a Massively Open On-line Course (MOOC) for off-campus participants, (2) a flipped/blended course for on-campus students, and, most recently, (3) a fully-online course for off-campus students.

  7. Fully solar-powered photoelectrochemical conversion for simultaneous energy storage and chemical sensing.

    PubMed

    Wang, Yongcheng; Tang, Jing; Peng, Zheng; Wang, Yuhang; Jia, Dingsi; Kong, Biao; Elzatahry, Ahmed A; Zhao, Dongyuan; Zheng, Gengfeng

    2014-06-11

    We report the development of a multifunctional, solar-powered photoelectrochemical (PEC)-pseudocapacitive-sensing material system for simultaneous solar energy conversion, electrochemical energy storage, and chemical detection. The TiO2 nanowire/NiO nanoflakes and the Si nanowire/Pt nanoparticle composites are used as photoanodes and photocathodes, respectively. A stable open-circuit voltage of ∼0.45 V and a high pseudocapacitance of up to ∼455 F g(-1) are obtained, which also exhibit a repeating charging-discharging capability. The PEC-pseudocapacitive device is fully solar powered, without the need of any external power supply. Moreover, this TiO2 nanowire/NiO nanoflake composite photoanode exhibits excellent glucose sensitivity and selectivity. Under the sun light illumination, the PEC photocurrent shows a sensitive increase upon different glucose additions. Meanwhile in the dark, the open-circuit voltage of the charged pseudocapacitor also exhibits a corresponding signal over glucose analyte, thus serving as a full solar-powered energy conversion-storage-utilization system.

  8. GeneMachine: gene prediction and sequence annotation.

    PubMed

    Makalowska, I; Ryan, J F; Baxevanis, A D

    2001-09-01

    A number of free-standing programs have been developed in order to help researchers find potential coding regions and deduce gene structure for long stretches of what is essentially 'anonymous DNA'. As these programs apply inherently different criteria to the question of what is and is not a coding region, multiple algorithms should be used in the course of positional cloning and positional candidate projects to assure that all potential coding regions within a previously-identified critical region are identified. We have developed a gene identification tool called GeneMachine which allows users to query multiple exon and gene prediction programs in an automated fashion. BLAST searches are also performed in order to see whether a previously-characterized coding region corresponds to a region in the query sequence. A suite of Perl programs and modules are used to run MZEF, GENSCAN, GRAIL 2, FGENES, RepeatMasker, Sputnik, and BLAST. The results of these runs are then parsed and written into ASN.1 format. Output files can be opened using NCBI Sequin, in essence using Sequin as both a workbench and as a graphical viewer. The main feature of GeneMachine is that the process is fully automated; the user is only required to launch GeneMachine and then open the resulting file with Sequin. Annotations can then be made to these results prior to submission to GenBank, thereby increasing the intrinsic value of these data. GeneMachine is freely-available for download at http://genome.nhgri.nih.gov/genemachine. A public Web interface to the GeneMachine server for academic and not-for-profit users is available at http://genemachine.nhgri.nih.gov. The Web supplement to this paper may be found at http://genome.nhgri.nih.gov/genemachine/supplement/.

  9. Open and Positive Attitudes toward Teaching

    ERIC Educational Resources Information Center

    Hsu, Chia-Fang

    2014-01-01

    This chapter argues that the most important thing for a nonnative English-speaking teacher is to have an open and positive attitude toward students. A teacher's willingness to work out problems with individual students, coupled with openness to students' ideas and criticism, should help improve students' negative attitudes toward…

  10. 17 CFR 151.4 - Position limits for Referenced Contracts.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... all-months-combined swaps open interest figures within one month, as practicable, after such data is... first 25,000 contracts of average all-months-combined aggregated open interest with a marginal increase... section; (2) Aggregate open interest calculations for non-spot-month position limits for non-legacy...

  11. 17 CFR 151.4 - Position limits for Referenced Contracts.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... all-months-combined swaps open interest figures within one month, as practicable, after such data is... first 25,000 contracts of average all-months-combined aggregated open interest with a marginal increase... section; (2) Aggregate open interest calculations for non-spot-month position limits for non-legacy...

  12. 17 CFR 151.4 - Position limits for Referenced Contracts.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... all-months-combined swaps open interest figures within one month, as practicable, after such data is... first 25,000 contracts of average all-months-combined aggregated open interest with a marginal increase... section; (2) Aggregate open interest calculations for non-spot-month position limits for non-legacy...

  13. Three-dimensional wax patterning of paper fluidic devices.

    PubMed

    Renault, Christophe; Koehne, Jessica; Ricco, Antonio J; Crooks, Richard M

    2014-06-17

    In this paper we describe a method for three-dimensional wax patterning of microfluidic paper-based analytical devices (μPADs). The method is rooted in the fundamental details of wax transport in paper and provides a simple way to fabricate complex channel architectures such as hemichannels and fully enclosed channels. We show that three-dimensional μPADs can be fabricated with half as much paper by using hemichannels rather than ordinary open channels. We also provide evidence that fully enclosed channels are efficiently isolated from the exterior environment, decreasing contamination risks, simplifying the handling of the device, and slowing evaporation of solvents.

  14. Vacuum breaker valve assembly

    DOEpatents

    Thompson, J.L.; Upton, H.A.

    1999-04-27

    Breaker valve assemblies for a simplified boiling water nuclear reactor are described. The breaker valve assembly, in one form, includes a valve body and a breaker valve. The valve body includes an interior chamber, and an inlet passage extends from the chamber and through an inlet opening to facilitate transporting particles from outside of the valve body to the interior chamber. The breaker valve is positioned in the chamber and is configured to substantially seal the inlet opening. Particularly, the breaker valve includes a disk which is sized to cover the inlet opening. The disk is movably coupled to the valve body and is configured to move substantially concentrically with respect to the valve opening between a first position, where the disk completely covers the inlet opening, and a second position, where the disk does not completely cover the inlet opening. 1 fig.

  15. Vacuum breaker valve assembly

    DOEpatents

    Thompson, Jeffrey L.; Upton, Hubert Allen

    1999-04-27

    Breaker valve assemblies for a simplified boiling water nuclear reactor are described. The breaker valve assembly, in one form, includes a valve body and a breaker valve. The valve body includes an interior chamber, and an inlet passage extends from the chamber and through an inlet opening to facilitate transporting particles from outside of the valve body to the interior chamber. The breaker valve is positioned in the chamber and is configured to substantially seal the inlet opening. Particularly, the breaker valve includes a disk which is sized to cover the inlet opening. The disk is movably coupled to the valve body and is configured to move substantially concentrically with respect to the valve opening between a first position, where the disk completely covers the inlet opening, and a second position, where the disk does not completely cover the inlet opening.

  16. Differences in self-reported outcomes of open prostatectomy patients and robotic prostatectomy patients in an international web-based survey.

    PubMed

    O'Shaughnessy, Peter Kevin; Laws, Thomas A; Pinnock, Carol; Moul, Judd W; Esterman, Adrian

    2013-12-01

    To compare patient reported outcomes between robotic assisted surgery and non-robotic assisted surgery. This was an international web-based survey based on a qualitative research and literature review, an internet-based questionnaire was developed with approximately 70 items. The questionnaire included both closed and open-ended questions. Responses were received from 193 men of whom 86 had received either open (OP) or robotic (RALP) surgery. A statistically significant (p=0.027), ranked analysis of covariance was found demonstrating higher recent distress in the robotic (RALP) surgery group. Although not statistically significant, there was a pattern of men having robotic (RALP) surgery reporting fewer urinary and bowel problems, but having a greater rate of sexual dysfunction. Men who opt for robotic surgery may have higher expectations for robotic (RALP) surgery, when these expectations are not fully met they may be less likely to accept the consequences of this major cancer surgery. Information regarding surgical choice needs to be tailored to ensure that men diagnosed with prostate cancer are fully informed of not only short term surgical and physical outcomes such as erectile dysfunction and incontinence, but also of potential issues with regards to masculinity, lifestyle and sexual health. Copyright © 2013. Published by Elsevier Ltd.

  17. Open source database of images DEIMOS: extension for large-scale subjective image quality assessment

    NASA Astrophysics Data System (ADS)

    Vítek, Stanislav

    2014-09-01

    DEIMOS (Database of Images: Open Source) is an open-source database of images and video sequences for testing, verification and comparison of various image and/or video processing techniques such as compression, reconstruction and enhancement. This paper deals with extension of the database allowing performing large-scale web-based subjective image quality assessment. Extension implements both administrative and client interface. The proposed system is aimed mainly at mobile communication devices, taking into account advantages of HTML5 technology; it means that participants don't need to install any application and assessment could be performed using web browser. The assessment campaign administrator can select images from the large database and then apply rules defined by various test procedure recommendations. The standard test procedures may be fully customized and saved as a template. Alternatively the administrator can define a custom test, using images from the pool and other components, such as evaluating forms and ongoing questionnaires. Image sequence is delivered to the online client, e.g. smartphone or tablet, as a fully automated assessment sequence or viewer can decide on timing of the assessment if required. Environmental data and viewing conditions (e.g. illumination, vibrations, GPS coordinates, etc.), may be collected and subsequently analyzed.

  18. [Construction of dengue virus-specific full-length fully human antibody libraries by mammalian display technology].

    PubMed

    Wen, Yangming; Lan, Kaijian; Wang, Junjie; Yu, Jingyi; Qu, Yarong; Zhao, Wei; Zhang, Fuchun; Tan, Wanlong; Cao, Hong; Zhou, Chen

    2013-06-01

    To construct dengue virus-specific full-length fully human antibody libraries using mammalian cell surface display technique. Total RNA was extracted from peripheral blood mononuclear cells (PBMCs) from convalescent patients with dengue fever. The reservoirs of the light chain and heavy chain variable regions (LCκ and VH) of the antibody genes were amplified by RT-PCR and inserted into the vector pDGB-HC-TM separately to construct the light chain and heavy chain libraries. The library DNAs were transfected into CHO cells and the expression of full-length fully human antibodies on the surface of CHO cells was analyzed by flow cytometry. Using 1.2 µg of the total RNA isolated from the PBMCs as the template, the LCκ and VH were amplified and the full-length fully human antibody mammalian display libraries were constructed. The kappa light chain gene library had a size of 1.45×10(4) and the heavy chain gene library had a size of 1.8×10(5). Sequence analysis showed that 8 out of the 10 light chain clones and 7 out of the 10 heavy chain clones randomly picked up from the constructed libraries contained correct open reading frames. FACS analysis demonstrated that all the 15 clones with correct open reading frames expressed full-length antibodies, which could be detected on CHO cell surfaces. After co-transfection of the heavy chain and light chain gene libraries into CHO cells, the expression of full-length antibodies on CHO cell surfaces could be detected by FACS analysis with an expressible diversity of the antibody library reaching 1.46×10(9) [(1.45×10(4)×80%)×(1.8×10(5)×70%)]. Using 1.2 µg of total RNA as template, the LCκ and VH full-length fully human antibody libraries against dengue virus have been successfully constructed with an expressible diversity of 10(9).

  19. Construction of a Digital Learning Environment Based on Cloud Computing

    ERIC Educational Resources Information Center

    Ding, Jihong; Xiong, Caiping; Liu, Huazhong

    2015-01-01

    Constructing the digital learning environment for ubiquitous learning and asynchronous distributed learning has opened up immense amounts of concrete research. However, current digital learning environments do not fully fulfill the expectations on supporting interactive group learning, shared understanding and social construction of knowledge.…

  20. Personalizing Science

    ERIC Educational Resources Information Center

    Danielowich, Robert M.

    2014-01-01

    Science teachers are aware of many social issues that intersect with science. These socio-scientific issues (SSIs) are "open-ended problems without clear-cut solutions [that] can be informed by scientific principles, theories, and data, but…cannot be fully determined by [them]" (Sadler 2011, p. 4). This article describes the SSI lessons…

  1. Relationship between hypnosis and personality trait in participants with high or low hypnotic susceptibility

    PubMed Central

    Zhang, Yingchun; Wang, Yunke; Shen, Chanchan; Ye, Yingying; Shen, Si; Zhang, Bingren; Wang, Jiawei; Chen, Wei; Wang, Wei

    2017-01-01

    Background The relationship between normal personality and hypnotic susceptibility is important for understanding mental processing and mental disorders, but it is less consistent in normal people or in patients with a psychiatric disorder. We have hypothesized that the correlation exists but varies in individuals with different levels of hypnotizability. Participants and methods We invited 72 individuals with high (HIGH group) and 47 individuals with low (LOW group) hypnotic susceptibilities to undertake tests of NEO-PI-R and the Stanford Hypnotic Susceptibility Scale, Form C (SHSSC). Results The HIGH group scored significantly higher than the LOW group did on openness to experience and its facet openness to feelings. In the LOW group, SHSSC total was positively predicted by openness to ideas; age regression was positively predicted by openness to experience and negatively predicted by extraversion; anosmia to ammonia was negatively predicted by agreeableness; and negative visual hallucination was positively predicted by openness to experience. In the HIGH group, hallucinated voice was positively predicted by openness to experience and negatively predicted by agreeableness, and posthypnotic amnesia was positively predicted by extraversion and negatively predicted by openness to experience. Conclusion The associations between normal personality traits and hypnotic susceptibility items were weak and different in the two groups, which imply that managing mental or somatoform disorders might be through adjusting hypnotizability and mobilizing personality functions. PMID:28435270

  2. Development of an Assay for the Detection of PrPres in Blood and Urine Based on PMCA Assay and ELISA Methods

    DTIC Science & Technology

    2006-09-01

    conducted any work with Biotraces in this last period and no funding was drawn from the grant. The collaboration is still open but the work was put...on hold until a better and more sensitive assay platform is developed and fully tested by Biotraces . The company is expected to open a laboratory...at the University of Maryland at the Baltimore campus. When this happens we will be able to establish a more efficient collaboration with Biotraces

  3. Jdpd: an open java simulation kernel for molecular fragment dissipative particle dynamics.

    PubMed

    van den Broek, Karina; Kuhn, Hubert; Zielesny, Achim

    2018-05-21

    Jdpd is an open Java simulation kernel for Molecular Fragment Dissipative Particle Dynamics with parallelizable force calculation, efficient caching options and fast property calculations. It is characterized by an interface and factory-pattern driven design for simple code changes and may help to avoid problems of polyglot programming. Detailed input/output communication, parallelization and process control as well as internal logging capabilities for debugging purposes are supported. The new kernel may be utilized in different simulation environments ranging from flexible scripting solutions up to fully integrated "all-in-one" simulation systems.

  4. Water inlet blowdown

    NASA Astrophysics Data System (ADS)

    Timar, T.

    1981-09-01

    A new blowdown system was developed for cleaning debris from the inlet grill of waterjet propulsion system on Boeing hydrofoil boats. A system was required to work with existing waterjet ducts which are open ended. The new blowdown system consists of an abrupt discharge of high pressure compressed air amidst the water inlet duct. It utilizes the open end of the propulsor discharge nozzle as a safety valve. Feasibility was proven by semi-steady state equations and was confirmed by full scale testing. A system was developed and installed and is now fully operational.

  5. Automatic laser beam alignment using blob detection for an environment monitoring spectroscopy

    NASA Astrophysics Data System (ADS)

    Khidir, Jarjees; Chen, Youhua; Anderson, Gary

    2013-05-01

    This paper describes a fully automated system to align an infra-red laser beam with a small retro-reflector over a wide range of distances. The component development and test were especially used for an open-path spectrometer gas detection system. Using blob detection under OpenCV library, an automatic alignment algorithm was designed to achieve fast and accurate target detection in a complex background environment. Test results are presented to show that the proposed algorithm has been successfully applied to various target distances and environment conditions.

  6. The effect of a defective BSF layer on solar cell open circuit voltage. [Back Surface Field

    NASA Technical Reports Server (NTRS)

    Weizer, V. G.

    1985-01-01

    A straightforward analysis of special limiting cases has permitted the determination of the range of possible open circuit voltage losses due to a defective BSF (back surface field) layer. An important result of the analysis is the finding that it is possible to have a fully effective BSF region, regardless of the spatial distribution of the defective areas, as long as the total defective area is reduced below certain limits. Distributed defects were found to be much more harmful than lumped defects.

  7. Quasicrystal structure and growth models: discussion of the status quo and the still open questions

    NASA Astrophysics Data System (ADS)

    Steurer, Walter

    2017-02-01

    Where are we now in quasicrystal (QC) research more than three decades after Dan Shechtman’s discovery? Do we fully understand the origin of quasiperiodicity, the formation, growth, thermodynamic stability, structure and properties of quasicrystals? First, I will shortly present the status quo, then I will address the still open questions, and identify potential focus areas for future research. Because of the limited space, I will focus on decagonal quasicrystals (DQCs); the status quo for research on icosahedral quasicrystals (IQCs) is comparable.

  8. Reinterventions after open and endovascular AAA repair.

    PubMed

    Malina, M

    2015-04-01

    Reinterventions seem to occur more frequently after endovascular aneurysm repair than after open surgical repair and are encountered in about 20% versus 10% of the cases, respectively. However, reinterventions following endovascular repair are predominantly endoluminal and early reinterventions are more frequent after open repair. The indications for reintervention after EVAR have changed over time. The incidence and type of reintervention depends on the complexity of the primary procedure, irrespective of whether it was open or endovascular. The use of a device outside instructions for use is associated with a higher complication rate but it may nevertheless be fully justified. Advanced stent-grafts such as fenestrated and branched devices require secondary procedures more often than a standard stent-graft. Similarly, more complex open repair, e.g. a bifurcated bypass, reimplantation of visceral arteries or a redo procedure, is also associated with more reinterventions than a simple tube graft. This manuscript presents some of the most common complications of open and endovascular aortic aneurysm repair and the reinterventions they require. Many of the complications are similar with both open and endovascular techniques. Limb thrombosis, infections and endoleaks are the most frequent indications for reintervention.

  9. The Open Cluster Chemical Abundances and Mapping (OCCAM) Survey: Optical Extension for Neutron Capture Elements

    NASA Astrophysics Data System (ADS)

    Melendez, Matthew; O'Connell, Julia; Frinchaboy, Peter M.; Donor, John; Cunha, Katia M. L.; Shetrone, Matthew D.; Majewski, Steven R.; Zasowski, Gail; Pinsonneault, Marc H.; Roman-Lopes, Alexandre; Stassun, Keivan G.; APOGEE Team

    2017-01-01

    The Open Cluster Chemical Abundance & Mapping (OCCAM) survey is a systematic survey of Galactic open clusters using data primarily from the SDSS-III/APOGEE-1 survey. However, neutron capture elements are very limited in the IR region covered by APOGEE. In an effort to fully study detailed Galactic chemical evolution, we are conducting a high resolution (R~60,000) spectroscopic abundance analysis of neutron capture elements for OCCAM clusters in the optical regime to complement the APOGEE results. As part of this effort, we present Ba II, La II, Ce II and Eu II results for a few open clusters without previous abundance measurements using data obtained at McDonald Observatory with the 2.1m Otto Struve telescope and Sandiford Echelle Spectrograph.This work is supported by an NSF AAG grant AST-1311835.

  10. The influence of stiffening ribs on the natural frequencies of butterfly valve disks

    NASA Astrophysics Data System (ADS)

    Ursoniu, C.; Pepa, D.; Tufoi, M.; Gillich, R. N.

    2017-01-01

    In this paper a study regarding the influence of the ribs shape on the dynamic behavior of butterfly valves, in terms of natural frequency variation, is presented. This behavior is important because the valve disk vibrates due to fluid flow when it is fully or partially open. If the disk is “locked in”, which means that frequency of oscillation is equal to the frequency of vortex shedding, the negative effect of resonance occurs, and harming of the structure is expected. The phenomenon is undesired and can be avoided by designing the disk in order to have the natural frequencies higher as the shedding frequencies. The study is performed via the finite element method (FEM) and first concerns in finding the proper disk thickness for the valve’s geometrical input parameters by static analysis. Afterward, modal analysis on disks with stiffness ribs of various shapes and positions is made. As a result, guidelines for designing the disk’s stiffening elements are provided.

  11. A Solar Energy Powered Autonomous Wireless Actuator Node for Irrigation Systems

    PubMed Central

    Lajara, Rafael; Alberola, Jorge; Pelegrí-Sebastiá, José

    2011-01-01

    The design of a fully autonomous and wireless actuator node (“wEcoValve mote”) based on the IEEE 802.15.4 standard is presented. The system allows remote control (open/close) of a 3-lead magnetic latch solenoid, commonly used in drip irrigation systems in applications such as agricultural areas, greenhouses, gardens, etc. The very low power consumption of the system in conjunction with the low power consumption of the valve, only when switching positions, allows the system to be solar powered, thus eliminating the need of wires and facilitating its deployment. By using supercapacitors recharged from a specifically designed solar power module, the need to replace batteries is also eliminated and the system is completely autonomous and maintenance free. The “wEcoValve mote” firmware is based on a synchronous protocol that allows a bidirectional communication with a latency optimized for real-time work, with a synchronization time between nodes of 4 s, thus achieving a power consumption average of 2.9 mW. PMID:22346580

  12. A solar energy powered autonomous wireless actuator node for irrigation systems.

    PubMed

    Lajara, Rafael; Alberola, Jorge; Pelegrí-Sebastiá, José

    2011-01-01

    The design of a fully autonomous and wireless actuator node ("wEcoValve mote") based on the IEEE 802.15.4 standard is presented. The system allows remote control (open/close) of a 3-lead magnetic latch solenoid, commonly used in drip irrigation systems in applications such as agricultural areas, greenhouses, gardens, etc. The very low power consumption of the system in conjunction with the low power consumption of the valve, only when switching positions, allows the system to be solar powered, thus eliminating the need of wires and facilitating its deployment. By using supercapacitors recharged from a specifically designed solar power module, the need to replace batteries is also eliminated and the system is completely autonomous and maintenance free. The "wEcoValve mote" firmware is based on a synchronous protocol that allows a bidirectional communication with a latency optimized for real-time work, with a synchronization time between nodes of 4 s, thus achieving a power consumption average of 2.9 mW.

  13. Football for life versus antidoping for the masses: ethical antidoping issues and solutions based on the extenuating experiences of an elite footballer competing while undergoing treatment for metastatic testicular cancer.

    PubMed

    Weiler, Richard; Tombides, Dylan; Urwin, Jon; Clarke, Jane; Verroken, Michele

    2014-05-01

    It is thankfully rare for extenuating circumstances to fully test the processes and procedures enshrined in national and world antidoping authorities' rules and laws. It is also thankfully very rare that a failed drugs test can have some positive implications. Antidoping laws are undoubtedly focused on ensuring fair competition, however, there are occasions when honest athletes discover medical diagnoses through failed antidoping tests. The purpose of this paper is to broadly discuss antidoping considerations encountered, based on the four principles of medical ethics and to propose simple solutions to these problems. Unfortunately, extreme medical circumstances will often test the limits of antidoping and medical processes and with open channels for feedback, these systems can improve. Performance enhancement seems an illogical concept if an athlete's medical treatment and disease are more inherently performance harming than unintended potential doping, but needs to be carefully managed to maintain fair sport.

  14. Acoustic Detection of Faults and Degradation in a High-Bypass Turbofan Engine during VIPR Phase III Testing

    NASA Technical Reports Server (NTRS)

    Boyle, Devin K.

    2017-01-01

    The Vehicle Integrated Propulsion Research (VIPR) Phase III project was executed at Edwards Air Force Base, California, by the National Aeronautics and Space Administration and several industry, academic, and government partners in the summer of 2015. One of the research objectives was to use external radial acoustic microphone arrays to detect changes in the noise characteristics produced by the research engine during volcanic ash ingestion and seeded fault insertion scenarios involving bleed air valves. Preliminary results indicate the successful acoustic detection of suspected degradation as a result of cumulative exposure to volcanic ash. This detection is shown through progressive changes, particularly in the high-frequency content, as a function of exposure to greater cumulative quantities of ash. Additionally, detection of the simulated failure of the 14th stage stability bleed valve and, to a lesser extent, the station 2.5 stability bleed valve, to their fully-open fail-safe positions was achieved by means of spectral comparisons between nominal (normal valve operation) and seeded fault scenarios.

  15. Exceptional points in anisotropic photonic structures: from non-Hermitian physics to possible device applications

    NASA Astrophysics Data System (ADS)

    Grundmann, Marius; Richter, Steffen; Michalsky, Tom; Sturm, Chris; Zúñiga-Pérez, Jesús; Schmidt-Grund, Rüdiger

    2017-02-01

    We demonstrate that exceptional points exist in fully transparent, optically "effectively" biaxial, anisotropic micro-cavities, fabricated using an uniaxial cavity material with its axis inclined to the Bragg mirror growth direction. This is similar to the existence of singular (optic) axes in absorbing biaxial crystals, but the lack of time reversal symmetry is mediated by the mode broadening, i.e. the photon escape from the - in principle - open cavity system. As a consequence the eigenmodes are generally elliptically polarized, and completely circularly polarized eigenmodes are expected in certain directions. Via geometric and chemical composition design degrees of freedom, the spectral and angular position of these chiral modes can be rationally designed. Possible applications arise from the use of such directions for circularly polarized emission without the use of spin injection or internal or external magnetic fields. Also the coupling of such modes to excitons, adding oscillator strength to the system, seems a promising avenue of research.

  16. Analysis of influential factors on haze pollution in China

    NASA Astrophysics Data System (ADS)

    Liu, Xiao-Hong; Jiang, Keshen

    2018-05-01

    This study tests the hypothesis of Environmental Kuznets Curve (EKC) between PM10 concentrations and economic growth and analyzes the influential factors of PM10 concentrations from the economic perspective by using the panel data on the PM10 concentrations of 30 provinces from 2003 to 2015 in China. Results of the regression estimation from the fully modified OLS (FMOLS) method show that a relationship characterized by an inverted U-shaped curve is observed between PM10 concentrations and gross domestic product (GDP) per capita and that an EKC exists in China’s haze pollution problem. PM10 concentrations have the most sensitive response to GDP. The elastic coefficients of the possession of civilian vehicles, urbanization and trade openness are positive values. More importantly, the elastic coefficient of the tertiary industry proportion is less than 0. Increase in the proportion of tertiary industry can effectively alleviate China’s problem on haze pollution. Lastly, relevant countermeasures and suggestions are presented.

  17. Statistics of resonances for a class of billiards on the Poincaré half-plane

    NASA Astrophysics Data System (ADS)

    Howard, P. J.; Mota-Furtado, F.; O'Mahony, P. F.; Uski, V.

    2005-12-01

    The lower boundary of Artin's billiard on the Poincaré half-plane is continuously deformed to generate a class of billiards with classical dynamics varying from fully integrable to completely chaotic. The quantum scattering problem in these open billiards is described and the statistics of both real and imaginary parts of the resonant momenta are investigated. The evolution of the resonance positions is followed as the boundary is varied which leads to large changes in their distribution. The transition to arithmetic chaos in Artin's billiard, which is responsible for the Poissonian level-spacing statistics of the bound states in the continuum (cusp forms) at the same time as the formation of a set of resonances all with width \\frac{1}{4} and real parts determined by the zeros of Riemann's zeta function, is closely examined. Regimes are found which obey the universal predictions of random matrix theory (RMT) as well as exhibiting non-universal long-range correlations. The Brody parameter is used to describe the transitions between different regimes.

  18. Football for life versus antidoping for the masses: ethical antidoping issues and solutions based on the extenuating experiences of an elite footballer competing while undergoing treatment for metastatic testicular cancer

    PubMed Central

    Weiler, Richard; Tombides, Dylan; Urwin, Jon; Clarke, Jane; Verroken, Michele

    2014-01-01

    It is thankfully rare for extenuating circumstances to fully test the processes and procedures enshrined in national and world antidoping authorities’ rules and laws. It is also thankfully very rare that a failed drugs test can have some positive implications. Antidoping laws are undoubtedly focused on ensuring fair competition, however, there are occasions when honest athletes discover medical diagnoses through failed antidoping tests. The purpose of this paper is to broadly discuss antidoping considerations encountered, based on the four principles of medical ethics and to propose simple solutions to these problems. Unfortunately, extreme medical circumstances will often test the limits of antidoping and medical processes and with open channels for feedback, these systems can improve. Performance enhancement seems an illogical concept if an athlete’s medical treatment and disease are more inherently performance harming than unintended potential doping, but needs to be carefully managed to maintain fair sport. PMID:24668050

  19. 48 CFR 217.7502 - General.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... production of the end item. (b) Shall provide for full and open competition when fully adequate drawings and any other needed data are available with the right to use for acquisition purposes (see part 227). However— (1) When data is not available for a competitive acquisition, use one of the procedures in PGI...

  20. 48 CFR 217.7502 - General.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... production of the end item. (b) Shall provide for full and open competition when fully adequate drawings and any other needed data are available with the right to use for acquisition purposes (see part 227). However— (1) When data is not available for a competitive acquisition, use one of the procedures in PGI...

  1. America's Open-Air Classrooms

    ERIC Educational Resources Information Center

    Matthews, William H., III

    1970-01-01

    Discusses U.S. National Parks as natural laboratories for the study of ecology, geology, earth science, and botany. Suggests activities which will enable children to more fully appreciate the great age of the earth, its history, the complexity of its structure and composition, and the myriad plants and animals which inhabit it. (BR)

  2. Distance Education for People with Visual Impairments

    ERIC Educational Resources Information Center

    Liakou, Maria; Manousou, Evaggelia

    2015-01-01

    This paper studies the standards of higher Distance Education, focusing on the Hellenic Open University, for people who have visual impairments, so that it becomes fully accessible and thus helps reduce social exclusion. Specifically, it aims to study the operational context of Distance Education, the possibilities that modern technology provides…

  3. 48 CFR 217.7502 - General.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... production of the end item. (b) Shall provide for full and open competition when fully adequate drawings and any other needed data are available with the right to use for acquisition purposes (see part 227). However— (1) When data is not available for a competitive acquisition, use one of the procedures in PGI...

  4. 48 CFR 217.7502 - General.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... production of the end item. (b) Shall provide for full and open competition when fully adequate drawings and any other needed data are available with the right to use for acquisition purposes (see part 227). However— (1) When data is not available for a competitive acquisition, use one of the procedures in PGI...

  5. 48 CFR 217.7502 - General.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... production of the end item. (b) Shall provide for full and open competition when fully adequate drawings and any other needed data are available with the right to use for acquisition purposes (see part 227). However— (1) When data is not available for a competitive acquisition, use one of the procedures in PGI...

  6. Alternative Learning Environments in the Elementary School.

    ERIC Educational Resources Information Center

    Davis, Eugene D.

    This paper outlines a program utilized in the Countryside School which offers alternative learning environments in the elementary school. The program includes (1) semi-departmentalization; (2) team teaching; and (3) an open-alternatives program. Each of these areas is outlined and fully discussed in terms of student and parent needs. (YRJ)

  7. 29 CFR 1910.68 - Manlifts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... balance. (2) Open type. One which has a handgrip surface fully exposed and capable of being encircled by... not less than No. 18 U.S. gauge sheet steel or material of equivalent strength or stiffness. The lower... type controller contacts carrying the main motor current shall be copper to carbon or equal, except...

  8. 40 CFR Appendix B to Subpart E of... - Tables

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Variable-Speed Engines Test segment Mode number Engine speed 1 Observed torque 2 (percent of max. observed...'s specifications. Idle speed is specified by the manufacturer. 2 Torque (non-idle): Throttle fully open for 100 percent points. Other non-idle points: ± 2 percent of engine maximum value. Torque (idle...

  9. Making Connections with Digital Data

    ERIC Educational Resources Information Center

    Leonard, William; Bassett, Rick; Clinger, Alicia; Edmondson, Elizabeth; Horton, Robert

    2004-01-01

    State-of-the-art digital cameras open up enormous possibilities in the science classroom, especially when used as data collectors. Because most high school students are not fully formal thinkers, the digital camera can provide a much richer learning experience than traditional observation. Data taken through digital images can make the…

  10. Arthroscopic Latarjet Techniques: Graft and Fixation Positioning Assessed With 2-Dimensional Computed Tomography Is Not Equivalent With Standard Open Technique.

    PubMed

    Neyton, Lionel; Barth, Johannes; Nourissat, Geoffroy; Métais, Pierre; Boileau, Pascal; Walch, Gilles; Lafosse, Laurent

    2018-05-19

    To analyze graft and fixation (screw and EndoButton) positioning after the arthroscopic Latarjet technique with 2-dimensional computed tomography (CT) and to compare it with the open technique. We performed a retrospective multicenter study (March 2013 to June 2014). The inclusion criteria included patients with recurrent anterior instability treated with the Latarjet procedure. The exclusion criterion was the absence of a postoperative CT scan. The positions of the hardware, the positions of the grafts in the axial and sagittal planes, and the dispersion of values (variability) were compared. The study included 208 patients (79 treated with open technique, 87 treated with arthroscopic Latarjet technique with screw fixation [arthro-screw], and 42 treated with arthroscopic Latarjet technique with EndoButton fixation [arthro-EndoButton]). The angulation of the screws was different in the open group versus the arthro-screw group (superior, 10.3° ± 0.7° vs 16.9° ± 1.0° [P < .001]; inferior, 10.3° ± 0.8° vs 15.7° ± 0.9° [P < .0001]). The angulation of the EndoButtons was 5.7° ± 0.5°; this was different from that of open inferior screws (P = .003). In the axial plane (level of equator), the arthroscopic techniques resulted in lateral positions (arthro-screw, 1.5 ± 0.3 mm lateral [P < .001]; arthro-EndoButton, 0 ± 0.3 mm lateral [P < .0001]) versus the open technique (0.9 ± 0.2 mm medial). At the level of 25% of the glenoid height, the arthroscopic techniques resulted in lateral positions (arthro-screw, 0.3 ± 0.3 mm lateral [P < .001]); (arthro-EndoButton, 0.7 ± 0.3 mm lateral [P < .0001]) versus the open technique (1.0 ± 0.2 mm medial). Higher variability was observed in the arthro-screw group. In the sagittal plane, the arthro-screw technique resulted in higher positions (55% ± 3% of graft below equator) and the arthro-EndoButton technique resulted in lower positions (82% ± 3%, P < .0001) versus the open technique (71% ± 2%). Variability was not different. This study shows that the position of the fixation devices and position of the bone graft with the arthroscopic techniques are statistically significantly different from those with the open technique with 2-dimensional CT assessment. In the sagittal plane, the arthro-screw technique provides the highest positions, and the arthro-EndoButton technique, the lowest. Overall, the mean position of the bone block with the open Latarjet technique in the axial plane is slightly medial to the joint line, as recommended. Conversely, with the arthroscopic techniques, the bone grafts are more lateral with a slight overhang. The main differences are observed in the dispersion of the values (more extreme positions) with the arthro-screw technique, given the acknowledged limitations. Despite the statistical significance, the clinical significance of these differences is yet unknown. Level III, retrospective comparative study. Copyright © 2018 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  11. 41 CFR 60-1.3 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., construction, transportation, research, insurance, and fund depository. The term Government contract does not.... (i) Example A: Contractor A posts on its web site an opening for a Mechanical Engineer position and... position. (ii) Example B: Contractor B posts on its web site an opening for the Accountant II position and...

  12. 41 CFR 60-1.3 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., construction, transportation, research, insurance, and fund depository. The term Government contract does not.... (i) Example A: Contractor A posts on its web site an opening for a Mechanical Engineer position and... position. (ii) Example B: Contractor B posts on its web site an opening for the Accountant II position and...

  13. 41 CFR 60-1.3 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., construction, transportation, research, insurance, and fund depository. The term Government contract does not.... (i) Example A: Contractor A posts on its web site an opening for a Mechanical Engineer position and... position. (ii) Example B: Contractor B posts on its web site an opening for the Accountant II position and...

  14. 41 CFR 60-1.3 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., construction, transportation, research, insurance, and fund depository. The term Government contract does not.... (i) Example A: Contractor A posts on its web site an opening for a Mechanical Engineer position and... position. (ii) Example B: Contractor B posts on its web site an opening for the Accountant II position and...

  15. 41 CFR 60-1.3 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., construction, transportation, research, insurance, and fund depository. The term Government contract does not.... (i) Example A: Contractor A posts on its web site an opening for a Mechanical Engineer position and... position. (ii) Example B: Contractor B posts on its web site an opening for the Accountant II position and...

  16. Heated, humidified high-flow nasal cannula therapy: yet another way to deliver continuous positive airway pressure?

    PubMed

    Kubicka, Zuzanna J; Limauro, Joseph; Darnall, Robert A

    2008-01-01

    The goal was to estimate the level of delivered continuous positive airway pressure by measuring oral cavity pressure with the mouth closed in infants of various weights and ages treated with heated, humidified high-flow nasal cannula at flow rates of 1-5 L/minute. We hypothesized that clinically relevant levels of continuous positive airway pressure would not be achieved if a nasal leak is maintained. After performing bench measurements and demonstrating that oral cavity pressure closely approximated levels of traditionally applied nasal continuous positive airway pressure, we successfully measured oral cavity pressure during heated, humidified, high-flow nasal cannula treatment in 27 infants. Small (outer diameter: 0.2 cm) cannulae were used for all infants, and flow rates were left as ordered by providers. Bench measurements showed that, for any given leak size, there was a nearly linear relationship between flow rate and pressure. The highest pressure achieved was 4.5 cmH2O (flow rate: 8 L/minute; leak: 3 mm). In our study infants (postmenstrual age: 29.1-44.7 weeks; weight: 835-3735 g; flow rate: 1-5 L/minute), no pressure was generated with the mouth open at any flow rate. With the mouth closed, the oral cavity pressure was related to both flow rate and weight. For infants of < or = 1500 g, there was a linear relationship between flow rate and oral cavity pressure. Oral cavity pressure can estimate the level of continuous positive airway pressure. Continuous positive airway pressure generated with heated, humidified, high-flow nasal cannula treatment depends on the flow rate and weight. Only in the smallest infants with the highest flow rates, with the mouth fully closed, can clinically significant but unpredictable levels of continuous positive airway pressure be achieved. We conclude that heated, humidified high-flow nasal cannula should not be used as a replacement for delivering continuous positive airway pressure.

  17. Monovalve with integrated fuel injector and port control valve, and engine using same

    DOEpatents

    Milam, David M.

    2001-11-06

    An engine includes an engine casing that defines a hollow piston cavity separated from an exhaust passage and an intake passage by a valve seat. A gas exchange valve member is positioned adjacent the valve seat and is moveable between an open position and a closed position. The gas exchange valve member also defines an opening that opens into the hollow piston cavity. A needle valve member is positioned in the gas exchange valve member adjacent a nozzle outlet and is moveable between an inject position and a blocked position. A port control valve member, which has a hydraulic surface, is mounted around the gas exchange valve member and moveable between an intake position and an exhaust position. A pilot valve is moveable between a first position at which the port control hydraulic surface is exposed to a source of high pressure fluid, and a second position at which the port control hydraulic surface is exposed to a source of low pressure fluid.

  18. KSC-99pp1182

    NASA Image and Video Library

    1999-10-07

    KENNEDY SPACE CENTER, FLA. -- At KSC's Shuttle Landing Facility, NASA's Super Guppy opens to reveal its cargo, the International Space Station's (ISS) S1 truss. Manufactured by the Boeing Co. in Huntington Beach, Calif., this component of the ISS is the first starboard (right-side) truss segment, whose main job is providing structural support for the orbiting research facility's radiator panels that cool the Space Station's complex power system. The S1 truss segment also will house communications systems, external experiment positions and other subsystems. Primarily constructed of aluminum, the truss segment is 45 feet long, 15 feet wide and 6 feet tall. When fully outfitted, it will weigh 31,137 pounds. The truss is slated for flight in 2001. The Super Guppy, with its 25-foot diameter fuselage designed to handle oversized loads, is well prepared to transport the truss and other ISS segments. Loading the Guppy is easy because of the unique "fold-away" nose of the aircraft that opens 110 degrees for cargo loading. A system of rails in the cargo compartment, used with either Guppy pallets or fixtures designed for specific cargo, makes cargo loading simple and efficient. Rollers mounted in the rails allow pallets or fixtures to be moved by an electric winch mounted beneath the cargo floor. Automatic hydraulic lock pins in each rail secure the pallet for flight. The truss is to be transferred to the Operations and Checkout Building

  19. An open, interoperable, and scalable prehospital information technology network architecture.

    PubMed

    Landman, Adam B; Rokos, Ivan C; Burns, Kevin; Van Gelder, Carin M; Fisher, Roger M; Dunford, James V; Cone, David C; Bogucki, Sandy

    2011-01-01

    Some of the most intractable challenges in prehospital medicine include response time optimization, inefficiencies at the emergency medical services (EMS)-emergency department (ED) interface, and the ability to correlate field interventions with patient outcomes. Information technology (IT) can address these and other concerns by ensuring that system and patient information is received when and where it is needed, is fully integrated with prior and subsequent patient information, and is securely archived. Some EMS agencies have begun adopting information technologies, such as wireless transmission of 12-lead electrocardiograms, but few agencies have developed a comprehensive plan for management of their prehospital information and integration with other electronic medical records. This perspective article highlights the challenges and limitations of integrating IT elements without a strategic plan, and proposes an open, interoperable, and scalable prehospital information technology (PHIT) architecture. The two core components of this PHIT architecture are 1) routers with broadband network connectivity to share data between ambulance devices and EMS system information services and 2) an electronic patient care report to organize and archive all electronic prehospital data. To successfully implement this comprehensive PHIT architecture, data and technology requirements must be based on best available evidence, and the system must adhere to health data standards as well as privacy and security regulations. Recent federal legislation prioritizing health information technology may position federal agencies to help design and fund PHIT architectures.

  20. Nurses' attitudes and behaviors on patient medication education.

    PubMed

    Bowen, Jane F; Rotz, Melissa E; Patterson, Brandon J; Sen, Sanchita

    2017-01-01

    Medication education is vital for positive patient outcomes. However, there is limited information about optimal medication education by nurses during hospitalization and care transitions. Examine nurses' attitudes and behaviors regarding the provision of patient medication education. The secondary objectives were to determine if nurses' medication education attitudes explain their behaviors, describe nurses' confidence in patient medication knowledge and abilities, and identify challenges to and improvements for medication education. A cross sectional survey was administered to nurses servicing internal medicine, cardiology, or medical-surgical patients. Twenty-four nurses completed the survey. Greater than 90% of nurses believed it is important to provide information on new medications and medical conditions, utilize resources, assess patient understanding and adherence, and use open ended question. Only 58% believed it is important to provide information on refill medications. Greater than 80% of nurses consistently provided information on new medications, assessed patient understanding, and utilized resources, but one-third or less used open-ended questions or provided information on refill medications. Most nurses spend 5-9 minutes per patient on medication education and their attitudes matched the following medication education behaviors: assessing adherence (0.57; p<0.01), providing information on new medications (0.52; p<0.05), using open-ended questions (0.51; p<0.01), and providing information on refill medications (0.39; p<0.05). Nurses had higher confidence that patients can understand and follow medication instructions, and identify names and purpose of their medications. Nurses had lower confidence that patients know what to expect from their medication or how to manage potential side effects. Communication, including language barriers and difficulty determining the patient's understanding of the information, was the most common challenge for nurses and they suggested utilization of translator services and patient-friendly drug information resources as a way to improve. Nurses have positive attitudes toward patient medication education. However, their attitudes do not fully explain their behaviors and many nurses are spending limited time with patients on medication education. Enhancements to medication education could include resources on communication and collaboration with pharmacists.

  1. Turbulent Fluid Motion 6: Turbulence, Nonlinear Dynamics, and Deterministic Chaos

    NASA Technical Reports Server (NTRS)

    Deissler, Robert G.

    1996-01-01

    Several turbulent and nonturbulent solutions of the Navier-Stokes equations are obtained. The unaveraged equations are used numerically in conjunction with tools and concepts from nonlinear dynamics, including time series, phase portraits, Poincare sections, Liapunov exponents, power spectra, and strange attractors. Initially neighboring solutions for a low-Reynolds-number fully developed turbulence are compared. The turbulence is sustained by a nonrandom time-independent external force. The solutions, on the average, separate exponentially with time, having a positive Liapunov exponent. Thus, the turbulence is characterized as chaotic. In a search for solutions which contrast with the turbulent ones, the Reynolds number (or strength of the forcing) is reduced. Several qualitatively different flows are noted. These are, respectively, fully chaotic, complex periodic, weakly chaotic, simple periodic, and fixed-point. Of these, we classify only the fully chaotic flows as turbulent. Those flows have both a positive Liapunov exponent and Poincare sections without pattern. By contrast, the weakly chaotic flows, although having positive Liapunov exponents, have some pattern in their Poincare sections. The fixed-point and periodic flows are nonturbulent, since turbulence, as generally understood, is both time-dependent and aperiodic.

  2. Open-MRI measures of cam intrusion for hips in an anterior impingement position relate to acetabular contact force.

    PubMed

    Buchan, Lawrence L; Zhang, Honglin; Konan, Sujith; Heaslip, Ingrid; Ratzlaff, Charles R; Wilson, David R

    2016-02-01

    Open MRI in functional positions has potential to directly and non-invasively assess cam femoroacetabular impingement (FAI). Our objective was to investigate whether open MRI can depict intrusion of the cam deformity into the intra-articular joint space, and whether intrusion is associated with elevated acetabular contact force. Cadaver hips (9 cam; 3 controls) were positioned in an anterior impingement posture and imaged using open MRI with multi-planar reformatting. The β-angle (describing clearance between the femoral neck and acetabulum) was measured around the entire circumference of the femoral neck. We defined a binary "MRI cam-intrusion sign" (positive if β < 0°). We then instrumented each hip with a piezoresistive sensor and conducted six repeated positioning trials, measuring acetabular contact force (F). We defined a binary "contact-force sign" (positive if F > 20N). Cam hips were more likely than controls to have both a positive MRI cam-intrusion sign (p = 0.0182, Fisher's exact test) and positive contact-force sign (p = 0.0083), which represents direct experimental evidence for cam intrusion. There was also a relationship between the MRI cam-intrusion sign and contact-force sign (p = 0.033), representing a link between imaging and mechanics. Our findings indicate that open MRI has significant potential for in vivo investigation of the cam FAI mechanism. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  3. Turbine nozzle positioning system

    DOEpatents

    Norton, Paul F.; Shaffer, James E.

    1996-01-30

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes an outer shroud having a mounting leg with an opening defined therein, a tip shoe ring having a mounting member with an opening defined therein, a nozzle support ring having a plurality of holes therein and a pin positioned in the corresponding opening in the outer shroud, opening in the tip shoe ring and the hole in the nozzle support ring. A rolling joint is provided between metallic components of the gas turbine engine and the nozzle guide vane assembly. The nozzle guide vane assembly is positioned radially about a central axis of the gas turbine engine and axially aligned with a combustor of the gas turbine engine.

  4. Turbine nozzle positioning system

    DOEpatents

    Norton, P.F.; Shaffer, J.E.

    1996-01-30

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes an outer shroud having a mounting leg with an opening defined therein, a tip shoe ring having a mounting member with an opening defined therein, a nozzle support ring having a plurality of holes therein and a pin positioned in the corresponding opening in the outer shroud, opening in the tip shoe ring and the hole in the nozzle support ring. A rolling joint is provided between metallic components of the gas turbine engine and the nozzle guide vane assembly. The nozzle guide vane assembly is positioned radially about a central axis of the gas turbine engine and axially aligned with a combustor of the gas turbine engine. 9 figs.

  5. Religious attitudes toward nuclear energy: an analysis of statements by religious groups

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, J.A. III

    This dissertation analyzes selected responses of religious groups to the question, Should society increase or decrease its reliance on energy produced by nuclear fission and for what reasons. The primary sources, dating from 1974 until mid-1980, are 82 official or semi-official statements and study documents of religious groups and 17 shareholder resolutions filed by religious groups. The groups are primarily from the United States, Canada, and Great Britain or related to the World Council of Churches. The thesis of the study is that a fully adequate religious statement about nuclear energy would show awareness of and deal with the questionsmore » raised in the analytical framework. Using that framework, there are few, if any, adequate religious statements about nuclear energy. A typology of ethical modes in Chapter V describes five positions: polemical anti-nuclear, dialogical anti-nuclear, dialogical middle, dialogical pro-nuclear, and polemical pro-nuclear. The bias of the study is to maintain open and rational discourse with all perspectives rather than to take a position for or against nuclear energy. The study primarily analyzes how religious groups deal with one complex social issue, nuclear energy, but the analytical framework has broad application to a variety of social issues as treated by religious groups.« less

  6. Anterior open bite treated with myofunctional therapy and palatal crib.

    PubMed

    Asiry, Moshabab A

    2015-03-01

    This case report demonstrates the treatment effects of palatal crib combined with the myofunctional therapy in a child with anterior open bite (AOB) due to thumb sucking and habitual anterior and low tongue position. The patient, an 11-year-old boy, had an anterior open bite and flared and spaced upper and lower incisors. Palatal cribs in conjunction with myofunctional therapy were used to discourage sucking habit and to adapt normal tongue position. Successful correction of the AOB with adequate overjet and overbite were achieved with total treatment time of 7 months. The importance of myofunctional therapy in adopting normal tongue position and in maintaining the stability of open bite correction is emphasized.

  7. mdFoam+: Advanced molecular dynamics in OpenFOAM

    NASA Astrophysics Data System (ADS)

    Longshaw, S. M.; Borg, M. K.; Ramisetti, S. B.; Zhang, J.; Lockerby, D. A.; Emerson, D. R.; Reese, J. M.

    2018-03-01

    This paper introduces mdFoam+, which is an MPI parallelised molecular dynamics (MD) solver implemented entirely within the OpenFOAM software framework. It is open-source and released under the same GNU General Public License (GPL) as OpenFOAM. The source code is released as a publicly open software repository that includes detailed documentation and tutorial cases. Since mdFoam+ is designed entirely within the OpenFOAM C++ object-oriented framework, it inherits a number of key features. The code is designed for extensibility and flexibility, so it is aimed first and foremost as an MD research tool, in which new models and test cases can be developed and tested rapidly. Implementing mdFoam+ in OpenFOAM also enables easier development of hybrid methods that couple MD with continuum-based solvers. Setting up MD cases follows the standard OpenFOAM format, as mdFoam+ also relies upon the OpenFOAM dictionary-based directory structure. This ensures that useful pre- and post-processing capabilities provided by OpenFOAM remain available even though the fully Lagrangian nature of an MD simulation is not typical of most OpenFOAM applications. Results show that mdFoam+ compares well to another well-known MD code (e.g. LAMMPS) in terms of benchmark problems, although it also has additional functionality that does not exist in other open-source MD codes.

  8. OpenSatKit Enables Quick Startup for CubeSat Missions

    NASA Technical Reports Server (NTRS)

    McComas, David; Melton, Ryan

    2017-01-01

    The software required to develop, integrate, and operate a spacecraft is substantial regardless of whether its a large or small satellite. Even getting started can be a monumental task. To solve this problem, NASAs Core Flight System (cFS), NASA's 42 spacecraft dynamics simulator, and Ball Aerospaces COSMOS ground system have been integrated together into a kit called OpenSatKit that provides a complete and open source software solution for starting a new satellite mission. Users can have a working system with flight software, dynamics simulation, and a ground command and control system up and running within hours.Every satellite mission requires three primary categories of software to function. The first is Flight Software (FSW) which provides the onboard control of the satellites and its payload(s). NASA's cFS provides a great platform for developing this software. Second, while developing a satellite on earth, it is necessary to simulate the satellites orbit, attitude, and actuators, to ensure that the systems that control these aspects will work correctly in the real environment. NASAs 42 simulator provides these functionalities. Finally, the ground has to be able to communicate with the satellite, monitor its performance and health, and display its data. Additionally, test scripts have to be written to verify the system on the ground. Ball Aerospace's COSMOS command and control system provides this functionality. Once the OpenSatKit is up and running, the next step is to customize the platform and get it running on the end target. Starting from a fully working system makes porting the cFS from Linux to a users platform much easier. An example Raspberry Pi target is included in the kit so users can gain experience working with a low cost hardware target. All users can benefit from OpenSatKit but the greatest impact and benefits will be to SmallSat missions with constrained budgets and small software teams. This paper describes OpenSatKits system design, the steps necessary to run the system to target the Raspberry Pi, and future plans. OpenSatKit is a free fully functional spacecraft software system that we hope will greatly benefit the SmallSat community.

  9. Finite spaces and schemes

    NASA Astrophysics Data System (ADS)

    Sancho de Salas, Fernando

    2017-12-01

    A ringed finite space is a ringed space whose underlying topological space is finite. The category of ringed finite spaces contains, fully faithfully, the category of finite topological spaces and the category of affine schemes. Any ringed space, endowed with a finite open covering, produces a ringed finite space. We introduce the notions of schematic finite space and schematic morphism, showing that they behave, with respect to quasi-coherence, like schemes and morphisms of schemes do. Finally, we construct a fully faithful and essentially surjective functor from a localization of a full subcategory of the category of schematic finite spaces and schematic morphisms to the category of quasi-compact and quasi-separated schemes.

  10. Interleukin-17 inhibitors. A new era in treatment of psoriasis and other skin diseases.

    PubMed

    Wasilewska, Agnieszka; Winiarska, Marta; Olszewska, Małgorzata; Rudnicka, Lidia

    2016-08-01

    Psoriasis is a chronic skin disease caused by the excessive secretion of inflammatory cytokines. Available therapeutic options include biologic drugs such as tumor necrosis factor alpha inhibitors and interleukin 12/23 (IL-12/23) inhibitors. The recent discovery of IL-17, which contributes to development of psoriasis, opened new possibilities for further treatment modalities. Currently, one anti-IL17 biological agent is approved for the treatment - a fully human monoclonal antibody that targets IL-17A (secukinumab). Further clinical trials, including a humanized IgG4 specific for IL-17 (ixekizumab) and a fully human antibody that targets the IL-17 receptor A (brodalumab).

  11. Genome sequencing of bacteria: sequencing, de novo assembly and rapid analysis using open source tools.

    PubMed

    Kisand, Veljo; Lettieri, Teresa

    2013-04-01

    De novo genome sequencing of previously uncharacterized microorganisms has the potential to open up new frontiers in microbial genomics by providing insight into both functional capabilities and biodiversity. Until recently, Roche 454 pyrosequencing was the NGS method of choice for de novo assembly because it generates hundreds of thousands of long reads (<450 bps), which are presumed to aid in the analysis of uncharacterized genomes. The array of tools for processing NGS data are increasingly free and open source and are often adopted for both their high quality and role in promoting academic freedom. The error rate of pyrosequencing the Alcanivorax borkumensis genome was such that thousands of insertions and deletions were artificially introduced into the finished genome. Despite a high coverage (~30 fold), it did not allow the reference genome to be fully mapped. Reads from regions with errors had low quality, low coverage, or were missing. The main defect of the reference mapping was the introduction of artificial indels into contigs through lower than 100% consensus and distracting gene calling due to artificial stop codons. No assembler was able to perform de novo assembly comparable to reference mapping. Automated annotation tools performed similarly on reference mapped and de novo draft genomes, and annotated most CDSs in the de novo assembled draft genomes. Free and open source software (FOSS) tools for assembly and annotation of NGS data are being developed rapidly to provide accurate results with less computational effort. Usability is not high priority and these tools currently do not allow the data to be processed without manual intervention. Despite this, genome assemblers now readily assemble medium short reads into long contigs (>97-98% genome coverage). A notable gap in pyrosequencing technology is the quality of base pair calling and conflicting base pairs between single reads at the same nucleotide position. Regardless, using draft whole genomes that are not finished and remain fragmented into tens of contigs allows one to characterize unknown bacteria with modest effort.

  12. Nuclear fuel pellet sintering boat unloading apparatus and method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Huggins, T.B.; Widener, W.H.; Klapper, K.K.

    1990-05-22

    This patent describes a method for unloading nuclear fuel pellets from a sintering boat having an open top. It comprises: pivoting a transfer housing loaded with the boat filled with nuclear fuel pellets about a generally horizontal axis from an upright position remote from a pellet deposit surface to an inverted position adjacent to the deposit surface to move the boat from an upright to inverted orientation with the pellets retained within the boat by a latched lid in a closed condition on the housing; unlatching the lid of the housing as the housing reaches its inverted position but engagingmore » the unlatched lid with the deposit surface to retain it in its closed condition; and reverse pivoting the housing from its inverted position back toward its upright position to permit the unlatched lid to pivot from the closed condition to an opened condition thereby allowing pellets to slide out of the open top of the inverted boat and down the opened lid of the housing to the deposit site.« less

  13. A fully automatic approach to register mobile mapping and airborne imagery to support the correction of platform trajectories in GNSS-denied urban areas

    NASA Astrophysics Data System (ADS)

    Jende, Phillipp; Nex, Francesco; Gerke, Markus; Vosselman, George

    2018-07-01

    Mobile Mapping (MM) solutions have become a significant extension to traditional data acquisition methods over the last years. Independently from the sensor carried by a platform, may it be laser scanners or cameras, high-resolution data postings are opposing a poor absolute localisation accuracy in urban areas due to GNSS occlusions and multipath effects. Potentially inaccurate position estimations are propagated by IMUs which are furthermore prone to drift effects. Thus, reliable and accurate absolute positioning on a par with MM's high-quality data remains an open issue. Multiple and diverse approaches have shown promising potential to mitigate GNSS errors in urban areas, but cannot achieve decimetre accuracy, require manual effort, or have limitations with respect to costs and availability. This paper presents a fully automatic approach to support the correction of MM imaging data based on correspondences with airborne nadir images. These correspondences can be employed to correct the MM platform's orientation by an adjustment solution. Unlike MM as such, aerial images do not suffer from GNSS occlusions, and their accuracy is usually verified by employing well-established methods using ground control points. However, a registration between MM and aerial images is a non-standard matching scenario, and requires several strategies to yield reliable and accurate correspondences. Scale, perspective and content strongly vary between both image sources, thus traditional feature matching methods may fail. To this end, the registration process is designed to focus on common and clearly distinguishable elements, such as road markings, manholes, or kerbstones. With a registration accuracy of about 98%, reliable tie information between MM and aerial data can be derived. Even though, the adjustment strategy is not covered in its entirety in this paper, accuracy results after adjustment will be presented. It will be shown that a decimetre accuracy is well achievable in a real data test scenario.

  14. Automatic initialization and quality control of large-scale cardiac MRI segmentations.

    PubMed

    Albà, Xènia; Lekadir, Karim; Pereañez, Marco; Medrano-Gracia, Pau; Young, Alistair A; Frangi, Alejandro F

    2018-01-01

    Continuous advances in imaging technologies enable ever more comprehensive phenotyping of human anatomy and physiology. Concomitant reduction of imaging costs has resulted in widespread use of imaging in large clinical trials and population imaging studies. Magnetic Resonance Imaging (MRI), in particular, offers one-stop-shop multidimensional biomarkers of cardiovascular physiology and pathology. A wide range of analysis methods offer sophisticated cardiac image assessment and quantification for clinical and research studies. However, most methods have only been evaluated on relatively small databases often not accessible for open and fair benchmarking. Consequently, published performance indices are not directly comparable across studies and their translation and scalability to large clinical trials or population imaging cohorts is uncertain. Most existing techniques still rely on considerable manual intervention for the initialization and quality control of the segmentation process, becoming prohibitive when dealing with thousands of images. The contributions of this paper are three-fold. First, we propose a fully automatic method for initializing cardiac MRI segmentation, by using image features and random forests regression to predict an initial position of the heart and key anatomical landmarks in an MRI volume. In processing a full imaging database, the technique predicts the optimal corrective displacements and positions in relation to the initial rough intersections of the long and short axis images. Second, we introduce for the first time a quality control measure capable of identifying incorrect cardiac segmentations with no visual assessment. The method uses statistical, pattern and fractal descriptors in a random forest classifier to detect failures to be corrected or removed from subsequent statistical analysis. Finally, we validate these new techniques within a full pipeline for cardiac segmentation applicable to large-scale cardiac MRI databases. The results obtained based on over 1200 cases from the Cardiac Atlas Project show the promise of fully automatic initialization and quality control for population studies. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. The origin of dwarf early-type galaxies

    NASA Astrophysics Data System (ADS)

    Toloba, E.

    2013-05-01

    We have conducted a spectrophotometric study of dwarf early-type galaxies (dEs) in the Virgo cluster and in regions of lower density. We have found that these galaxies show many properties in common with late-type galaxies but not with more massive early-types (E/S0). The properties of the dEs in Virgo show gradients within the cluster. dEs in the outer parts of the Virgo cluster are kinematically supported by rotation, while those in the center are supported by the random motions of their stars (i.e. pressure supported). The rotationally supported dEs have disky isophotes and faint underlying spiral/irregular substructures, they also show younger ages than those pressure supported, which have boxy isophotes and are smooth and regular, without any substructure. We compare the position of these dEs with massive early-type galaxies in the Faber-Jackson and Fundamental Plane relations, and we find that, although there is no difference between the position of rotationally and pressure supported dEs, both deviate from the relations of massive early-type galaxies in the direction of dwarf spheroidal systems (dSphs). We have used their offset with respect to the Fundamental Plane of E/S0 galaxies to estimate their dark matter fraction. All the properties studied in this work agree with a ram pressure stripping scenario, where late-type galaxies infall into the cluster, their interaction with the intergalactic medium blows away their gas and, as a result, they are quenched in a small amount of time. However, those dEs in the center of the cluster seem to have been fully transformed leaving no trace of their possible spiral origin, thus, if that is the case, they must have experienced a more violent mechanism in combination with ram pressure stripping, the open problem is that even galaxy harassment does not fully explain the observed properties for the pressure supported dEs in the center of the Virgo cluster.

  16. Cell design for lithium alloy/metal sulfide battery

    DOEpatents

    Kaun, Thomas D.

    1985-01-01

    The disclosed lithium alloy/iron sulfide cell design provides loop-like positive and negative sheet metal current collectors electrically insulated from one another by separator means, the positive collector being located outwardly of the negative collector. The collectors are initially secured within an open-ended cell housing, which allows for collector pretesting for electrical shorts prior to adding any electrode materials and/or electrolyte to the cell. Separate chambers are defined outwardly of the positive collector and inwardly of the negative collector open respectively in opposite directions toward the open ends of the cell housing; and positive and negative electrode materials can be extruded into these respective chambers via the opposite open housing ends. The chambers and cell housing ends can then be sealed closed. A cross wall structurally reinforces the cell housing and also thereby defines two cavities, and paired positive and negative collectors are disposed in each cavity and electrically connected in parallel. The cell design provides for a high specific energy output and improved operating life in that any charge-discharge cycle swelling of the positive electrode material will be inwardly against only the positive collector to minimize shorts caused by the collectors shifting relative to one another.

  17. Improved cell design for lithium alloy/metal sulfide battery

    DOEpatents

    Kaun, T.D.

    1984-03-30

    The disclosed lithium alloy/iron sulfide cell design provides loop-like positive and negative sheet metal current collectors electrically insulated from one another by separator means, the positive collector being located outwardly of the negative collector. The collectors are initially secured within an open-ended cell housing, which allows for collector pretesting for electrical shorts prior to adding any electrode materials and/or electrolyte to the cell. Separate chambers are defined outwardly of the positive collector and inwardly of the negative collector open respectively in opposite directions toward the open ends of the cell housing; and positive and negative electrode materials can be extruded into these respective chambers via the opposite open housing ends. The chambers and cell housing ends can then be sealed closed. A cross wall structurally reinforces the cell housing and also thereby defines two cavities, and paired positive and negative collectors are disposed in each cavity and electrically connected in parallel. The cell design provides for a high specific energy output and improved operating life in that any charge-discharge cycle swelling of the positive electrode material will be inwardly against only the positive collector to minimize shorts caused by the collectors shifting relative to one another.

  18. 45° sign switching of effective exchange bias due to competing anisotropies in fully epitaxial Co3FeN/MnN bilayers.

    PubMed

    Hajiri, T; Yoshida, T; Filianina, M; Jaiswal, S; Borie, B; Asano, H; Zabel, H; Kläui, M

    2017-12-05

    We report an unusual angular-dependent exchange bias effect in ferromagnet/antiferromagnet bilayers, where both ferromagnet and antiferromagnet are epitaxially grown. Numerical model calculations predict an approximately 45° period for the sign switching of the exchange-bias field, depending on the ratio between magnetocrystalline anisotropy and exchange-coupling constant. The switching of the sign is indicative of a competition between a fourfold magnetocrystalline anisotropy of the ferromagnet and a unidirectional anisotropy field of the exchange coupling. This predicted unusual angular-dependent exchange bias and its magnetization switching process are confirmed by measurements on fully epitaxial Co 3 FeN/MnN bilayers by longitudinal and transverse magneto-optic Kerr effect magnetometry. These results provide a deeper understanding of the exchange coupling phenomena in fully epitaxial bilayers with tailored materials and open up a complex switching energy landscape engineering by anisotropies.

  19. 45° sign switching of effective exchange bias due to competing anisotropies in fully epitaxial Co3FeN/MnN bilayers

    NASA Astrophysics Data System (ADS)

    Hajiri, T.; Yoshida, T.; Filianina, M.; Jaiswal, S.; Borie, B.; Asano, H.; Zabel, H.; Kläui, M.

    2018-01-01

    We report an unusual angular-dependent exchange bias effect in ferromagnet/antiferromagnet bilayers, where both ferromagnet and antiferromagnet are epitaxially grown. Numerical model calculations predict an approximately 45° period for the sign switching of the exchange-bias field, depending on the ratio between magnetocrystalline anisotropy and exchange-coupling constant. The switching of the sign is indicative of a competition between a fourfold magnetocrystalline anisotropy of the ferromagnet and a unidirectional anisotropy field of the exchange coupling. This predicted unusual angular-dependent exchange bias and its magnetization switching process are confirmed by measurements on fully epitaxial Co3FeN/MnN bilayers by longitudinal and transverse magneto-optic Kerr effect magnetometry. These results provide a deeper understanding of the exchange coupling phenomena in fully epitaxial bilayers with tailored materials and open up a complex switching energy landscape engineering by anisotropies.

  20. A classification of open Gaussian dynamics

    NASA Astrophysics Data System (ADS)

    Grimmer, Daniel; Brown, Eric; Kempf, Achim; Mann, Robert B.; Martín-Martínez, Eduardo

    2018-06-01

    We introduce a classification scheme for the generators of bosonic open Gaussian dynamics, providing instructive diagrams description for each type of dynamics. Using this classification, we discuss the consequences of imposing complete positivity on Gaussian dynamics. In particular, we show that non-symplectic operations must be active to allow for complete positivity. In addition, non-symplectic operations can, in fact, conserve the volume of phase space only if the restriction of complete positivity is lifted. We then discuss the implications for the relationship between information and energy flows in open quantum mechanics.

  1. Open ISEmeter: An open hardware high-impedance interface for potentiometric detection.

    PubMed

    Salvador, C; Mesa, M S; Durán, E; Alvarez, J L; Carbajo, J; Mozo, J D

    2016-05-01

    In this work, a new open hardware interface based on Arduino to read electromotive force (emf) from potentiometric detectors is presented. The interface has been fully designed with the open code philosophy and all documentation will be accessible on web. The paper describes a comprehensive project including the electronic design, the firmware loaded on Arduino, and the Java-coded graphical user interface to load data in a computer (PC or Mac) for processing. The prototype was tested by measuring the calibration curve of a detector. As detection element, an active poly(vinyl chloride)-based membrane was used, doped with cetyltrimethylammonium dodecylsulphate (CTA(+)-DS(-)). The experimental measures of emf indicate Nernstian behaviour with the CTA(+) content of test solutions, as it was described in the literature, proving the validity of the developed prototype. A comparative analysis of performance was made by using the same chemical detector but changing the measurement instrumentation.

  2. Optimal degree of mouth opening for laryngeal mask airway function during oral surgery.

    PubMed

    Sanuki, Takuro; Sugioka, Shingo; Hirokane, Motoko; Son, Hiroki; Uda, Rumiko; Akatsuka, Masafumi; Kotani, Junichiro

    2011-04-01

    This study was performed to determine the optimal degree of mouth opening in anesthetized patients requiring laryngeal mask airway (LMA) during oral surgery. A single, experienced LMA user inserted the LMA in 15 patients who were scheduled for elective oral surgery. Oropharyngeal leak pressure, intracuff pressure, and fiberoptic assessment of the LMA position were sequentially documented in 5 mouth conditions-opening of 1.4 (neutral position), 2, 3, 4, and 5 cm-and any resulting ventilatory difficulties were recorded. Oropharyngeal leak pressure with the mouth open 4 cm (21.8 ± 3.2 cm H(2)O, P = .025) and 5 cm (27.3 ± 7.2 cm H(2)O, P < .001) was significantly higher than in the neutral position (18.1 ± 1.5 cm H(2)O), as was intracuff pressure (neutral position, 60.0 ± 0 cm H(2)O; 4 cm, 72.6 ± 5.1 cm H(2)O [P < .001]; and 5 cm, 86.9 ± 14.4 cm H(2)O [P < .001]). LMA position, observed by fiberoptic bronchoscopy, was unchanged by mouth opening, being similar in the 5 mouth conditions (P = .999). In addition, ventilation difficulties (abnormal capnograph curves or inadequate tidal volume) occurred in 2 of 15 patients (13%) and 7 of 15 patients (53%) (P < .001) with the mouth opening of 4 and 5 cm, respectively. This study showed that a mouth opening over 4 cm led to substantial increases in oropharyngeal leak pressure and intracuff pressure of the LMA, warranting caution, because gastric insufflation, sore throat, and ventilation difficulties may occur. A mouth opening of 3 cm achieves acceptable airway conditions for anesthetized patients requiring LMA. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  3. Direct Detection of Alternative Open Reading Frames Translation Products in Human Significantly Expands the Proteome

    PubMed Central

    Vanderperre, Benoît; Lucier, Jean-François; Bissonnette, Cyntia; Motard, Julie; Tremblay, Guillaume; Vanderperre, Solène; Wisztorski, Maxence; Salzet, Michel; Boisvert, François-Michel; Roucou, Xavier

    2013-01-01

    A fully mature mRNA is usually associated to a reference open reading frame encoding a single protein. Yet, mature mRNAs contain unconventional alternative open reading frames (AltORFs) located in untranslated regions (UTRs) or overlapping the reference ORFs (RefORFs) in non-canonical +2 and +3 reading frames. Although recent ribosome profiling and footprinting approaches have suggested the significant use of unconventional translation initiation sites in mammals, direct evidence of large-scale alternative protein expression at the proteome level is still lacking. To determine the contribution of alternative proteins to the human proteome, we generated a database of predicted human AltORFs revealing a new proteome mainly composed of small proteins with a median length of 57 amino acids, compared to 344 amino acids for the reference proteome. We experimentally detected a total of 1,259 alternative proteins by mass spectrometry analyses of human cell lines, tissues and fluids. In plasma and serum, alternative proteins represent up to 55% of the proteome and may be a potential unsuspected new source for biomarkers. We observed constitutive co-expression of RefORFs and AltORFs from endogenous genes and from transfected cDNAs, including tumor suppressor p53, and provide evidence that out-of-frame clones representing AltORFs are mistakenly rejected as false positive in cDNAs screening assays. Functional importance of alternative proteins is strongly supported by significant evolutionary conservation in vertebrates, invertebrates, and yeast. Our results imply that coding of multiple proteins in a single gene by the use of AltORFs may be a common feature in eukaryotes, and confirm that translation of unconventional ORFs generates an as yet unexplored proteome. PMID:23950983

  4. FDA Approval: Palbociclib for the Treatment of Postmenopausal Patients with Estrogen Receptor-Positive, HER2-Negative Metastatic Breast Cancer.

    PubMed

    Beaver, Julia A; Amiri-Kordestani, Laleh; Charlab, Rosane; Chen, Wei; Palmby, Todd; Tilley, Amy; Zirkelbach, Jeanne Fourie; Yu, Jingyu; Liu, Qi; Zhao, Liang; Crich, Joyce; Chen, Xiao Hong; Hughes, Minerva; Bloomquist, Erik; Tang, Shenghui; Sridhara, Rajeshwari; Kluetz, Paul G; Kim, Geoffrey; Ibrahim, Amna; Pazdur, Richard; Cortazar, Patricia

    2015-11-01

    On February 3, 2015, the FDA granted accelerated approval to palbociclib (IBRANCE, Pfizer Inc.), an inhibitor of cyclin-dependent kinases 4 and 6 (CDK4 and CDK6), for use in combination with letrozole for the treatment of postmenopausal women with estrogen receptor (ER)-positive, HER2-negative advanced breast cancer as initial endocrine-based therapy for their metastatic disease. The approval is based on a randomized, multicenter, open-label phase I/II trial (PALOMA-1) in 165 patients randomized to palbociclib (125 mg orally daily for 21 consecutive days, followed by 7 days off treatment) plus letrozole (2.5 mg orally daily) or letrozole alone. The phase II portion of the trial was divided into two cohorts: cohort 1 enrolled 66 biomarker-unselected patients and cohort 2 enrolled 99 biomarker-positive patients. The major efficacy outcome measure was investigator-assessed progression-free survival (PFS). A large magnitude of improvement in PFS was observed in patients receiving palbociclib plus letrozole compared with patients receiving letrozole alone (HR, 0.488; 95% confidence interval, 0.319-0.748). Multiple sensitivity analyses were supportive of clinical benefit. The most common adverse reaction in patients receiving palbociclib plus letrozole was neutropenia. This article summarizes the FDA thought process and data supporting accelerated approval based on PALOMA-1 that may be contingent upon verification and description of clinical benefit in the ongoing and fully accrued confirmatory trial PALOMA-2. ©2015 American Association for Cancer Research.

  5. How children cope when a parent has advanced cancer.

    PubMed

    Kennedy, Vida L; Lloyd-Williams, Mari

    2009-08-01

    When parents are diagnosed with cancer, children experience significant distress. There is little information regarding the nature of this distress and how children cope, particularly when a parent is diagnosed with advanced cancer. This study aimed to explore how children cope, and to identify areas where there may be barriers to children accessing support to enable them to cope. Semi-structured interviews were conducted with ill parents with advanced cancer and well parents and/or any children above the age of 7. Interviews were recorded and transcribed fully, and analysed using a constructionist grounded theory approach. Twenty-eight family participants were interviewed. Four major themes emerged from the data including response to diagnosis, mechanisms of coping, life changes, and positive aspects. Children described being distressed by their parents diagnosis and having concerns related to their parents and their own health. Distraction and maintaining normality were described as the dominant strategies of coping for children, and increased responsibilities and decreased social activity were considered to be the most noticeable of life changes. Parents did not recognise the impact on children to the same degree as described by children and focused on limiting the impact by maintaining normality. Positive aspects described by children and parents included strengthening of relationships and learning to value family members and the important things in life. Open communication within the family may lead to more effective coping and a positive experience for children whose parents have been diagnosed with advanced cancer.

  6. Deployable reconnaissance from a VTOL UAS in urban environments

    NASA Astrophysics Data System (ADS)

    Barnett, Shane; Bird, John; Culhane, Andrew; Sharkasi, Adam; Reinholtz, Charles

    2007-04-01

    Reconnaissance collection in unknown or hostile environments can be a dangerous and life threatening task. To reduce this risk, the Unmanned Systems Group at Virginia Tech has produced a fully autonomous reconnaissance system able to provide live video reconnaissance from outside and inside unknown structures. This system consists of an autonomous helicopter which launches a small reconnaissance pod inside a building and an operator control unit (OCU) on a ground station. The helicopter is a modified Bergen Industrial Twin using a Rotomotion flight controller and can fly missions of up to one half hour. The mission planning OCU can control the helicopter remotely through teleoperation or fully autonomously by GPS waypoints. A forward facing camera and template matching aid in navigation by identifying the target building. Once the target structure is identified, vision algorithms will center the UAS adjacent to open windows or doorways. Tunable parameters in the vision algorithm account for varying launch distances and opening sizes. Launch of the reconnaissance pod may be initiated remotely through a human in the loop or autonomously. Compressed air propels the half pound stationary pod or the larger mobile pod into the open portals. Once inside the building, the reconnaissance pod will then transmit live video back to the helicopter. The helicopter acts as a repeater node for increased video range and simplification of communication back to the ground station.

  7. 77 FR 33619 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-07

    ..., and doing related investigative and corrective actions if necessary. This new AD adds an [[Page 33620... or service door to open fully in the event of an emergency evacuation, which could impede exit from... necessary. That NPRM also proposed to add an airplane to the applicability and also remove certain other...

  8. Transgender Policy: What is Fair for All Students?

    ERIC Educational Resources Information Center

    Kaiser, Matthew M.; Seitz, Keshia M.; Walters, Elizabeth A.

    2014-01-01

    Ritha Smith, assistant superintendent, and Seth Hanson, principal, are faced with a difficult decision. Taylor Harper is a transgender student who identifies as male and is openly attracted to females. Taylor's parents, Lane and Morgan Harper, are lesbians; they are fully supportive of their child's identification and are well versed in their…

  9. Empowerment through Narrative: Considerations for Teaching, Learning and Life.

    ERIC Educational Resources Information Center

    Alter, Gloria

    1993-01-01

    Power based on self-assertion, openness, and human connection is the hallmark of empowered classrooms and schools. The process of more fully exercising power can be greatly enhanced by using narrative. Empowered individuals and groups reveal their strength in the nurturing of many voices and in the subsequent transformation of their lives. Sample…

  10. 75 FR 33289 - Columbia Gas Transmission, LLC; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-11

    ... fields to develop further storage services, as more fully set forth in the application which is open to... certificate of public convenience and necessity, seeking authority to extend the test and evaluation period at Columbia's Lanham, Terra Alta, and Terra Alta South storage fields, all located in West Virginia.\\1...

  11. 76 FR 28967 - Columbia Gas Transmission, LLC; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-19

    ... authority to continue to test and evaluate its Coco C storage field located in Kanawha County, West Virginia... field to develop further storage services, all as more fully set forth in the application which is on file with the Commission and open to public inspection. Any questions regarding this application should...

  12. 40 CFR 86.884-7 - Dynamometer operation cycle for smoke emission tests.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Dynamometer operation cycle for smoke... Dynamometer operation cycle for smoke emission tests. (a) The following sequence of operations shall be... the preconditioning prior to the smoke cycle. (ii) With the throttle remaining in the fully open...

  13. A Case of Problem Based Learning for Cross-Institutional Collaboration

    ERIC Educational Resources Information Center

    Nerantzi, Chrissi

    2012-01-01

    The idea of moving away from battery-type Academic Development Activities and silo modules and programmes towards open cross-institutional approaches in line with OEP are explored within this paper based on a recent small-scale, fully-online study. This brought together academics and other professionals who support learning, from different…

  14. Think College! Postsecondary Education Options for Students with Intellectual Disabilities

    ERIC Educational Resources Information Center

    Grigal, Meg; Hart, Debra

    2010-01-01

    As the Higher Education Opportunity Act opens the door to more options and supports, more and more students with intellectual disabilities are "thinking college." That means high schools, colleges, and universities must be fully prepared to meet the needs of students with disabilities--and this comprehensive resource is just what they…

  15. Air Pollution Abatement Performances of Green Infrastructure in Open Road and Built-up Street Canyon Environments – A Review

    EPA Science Inventory

    Intensifying the proportion of urban green infrastructure has been considered as one of the remedies for air pollution levels in cities, yet the impact of numerous vegetation types deployed in different built environments has to be fully synthesised and quantified. This review ex...

  16. 78 FR 9681 - Dominion Transmission, Inc.; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-11

    ... Transmission, Inc.; Notice of Application Take notice that on January 25, 2013, Dominion Transmission, Inc. (Dominion), 120 Tredegar Street, Richmond, VA 23219, filed an application in Docket No. CP13-59-000 pursuant... Midstream, LLC, all as more fully set forth in the application which is on file with the Commission and open...

  17. Peregrine Software Toolchains | High-Performance Computing | NREL

    Science.gov Websites

    toolchain is an open-source alternative against which many technical applications are natively developed and tested. The Portland Group compilers are not fully supported, but are available to the HPC community. Use Group (PGI) C/C++ and Fortran (partially supported) The PGI Accelerator compilers include NVIDIA GPU

  18. Singing the Spaces: Artful Approaches to Navigating the Emotional Landscape in Environmental Education

    ERIC Educational Resources Information Center

    Burkhart, Jocelyn

    2016-01-01

    This paper briefly explores the gap in the environmental education literature on emotions, and then offers a rationale and potential directions for engaging the emotions more fully, through the arts. Using autoenthnographic and arts-based methods, and including original songs and invitational reflective questions to open spaces for further inquiry…

  19. CO2 and chamber effects on epidermal development in field grown peanut (Arachis hypogaea L.)

    USDA-ARS?s Scientific Manuscript database

    Peanut, (Arachis hypogaea L.) cvar. C76–16, was grown either in the field, or in open gas exchange chambers under elevated or ambient CO2 concentrations. Stomatal density and other selected epidermal parameters associated with leaf development and gas exchange were measured on recently fully expande...

  20. Utilizing Online Exams: A Case Study

    ERIC Educational Resources Information Center

    Schmidt, Stacy M. P.; Ralph, David L.; Buskirk, Bruce

    2009-01-01

    Technology has opened a wide range of possibilities for the college classroom. Thus, the classroom has changed in a variety of ways. Some courses have been converted to fully online courses. Students and instructors do not have any face-to-face contact in these courses. Other courses have converted a portion of their courses to online. These…

  1. Turbulent Supersonic/Hypersonic Heating Correlations for Open and Closed Cavities

    NASA Technical Reports Server (NTRS)

    Everhart, Joel L.; Greene, Francis A.

    2009-01-01

    Supersonic/hypersonic laminar heating correlations that were developed for damage assessment analysis of atmospheric re-entry vehicles have been modified and extended to cover fully-turbulent conditions over rectangular cavity geometries that are aligned with the local velocity. Turbulent boundary layer properties were computationally determined and used to develop the cavity geometry parametrics and to correlate experimental closed cavity heating data to yield new relationships for the floor-averaged and centerline endwall peak-heating augmentation. With the form of the closed-cavity correlations established, historical data were used to develop new correlations for turbulent open-cavity heating.

  2. Turbulent Supersonic/Hypersonic Heating Correlations for Open and Closed Cavities

    NASA Technical Reports Server (NTRS)

    Everhart, Joel L.; Greene, Francis A.

    2009-01-01

    Supersonic/hypersonic laminar heating correlations that were developed for damage assessment analysis of atmospheric re-entry vehicles have been modified and extended to cover fully-turbulent conditions over rectangular cavity geometries that are aligned with the local velocity. Turbulent boundary layer properties were computationally determined and used to develop the cavity geometry parametrics and to correlate experimental closed cavity heating data to yield new relationships for the floor-averaged and centerline endwall peakheating augmentation. With the form of the closed-cavity correlations established, historical data were used to develop new correlations for turbulent open-cavity heating.

  3. Averaging in SU(2) open quantum random walk

    NASA Astrophysics Data System (ADS)

    Clement, Ampadu

    2014-03-01

    We study the average position and the symmetry of the distribution in the SU(2) open quantum random walk (OQRW). We show that the average position in the central limit theorem (CLT) is non-uniform compared with the average position in the non-CLT. The symmetry of distribution is shown to be even in the CLT.

  4. Curved butterfly bileaflet prosthetic cardiac valve

    DOEpatents

    McQueen, David M.; Peskin, Charles S.

    1991-06-25

    An annular valve body having a central passageway for the flow of blood therethrough with two curved leaflets each of which is pivotally supported on an accentric positioned axis in the central passageway for moving between a closed position and an open position. The leaflets are curved in a plane normal to the eccentric axis and positioned with the convex side of the leaflets facing each other when the leaflets are in the open position. Various parameters such as the curvature of the leaflets, the location of the eccentric axis, and the maximum opening angle of the leaflets are optimized according to the following performance criteria: maximize the minimum peak velocity through the valve, maximize the net stroke volume, and minimize the mean forward pressure difference, thereby reducing thrombosis and improving the hemodynamic performance.

  5. Minimal Invasive Linea Alba Reconstruction for the Treatment of Umbilical and Epigastric Hernias with Coexisting Rectus Abdominis Diastasis.

    PubMed

    Köhler, Gernot; Fischer, Ines; Kaltenböck, Richard; Schrittwieser, Rudolf

    2018-04-05

    Patients with umbilical or epigastric hernias benefit from mesh- based repairs, and even more so if a concomitant rectus diastasis (RD) is present. The ideal technique is, however, still under debate. In this study we introduce the minimal invasive linea alba reconstruction (MILAR) with the supraaponeurotic placement of a fully absorbable synthetic mesh. Midline reconstruction with anterior rectus sheath repair and mesh augmentation by an open approach is a well-known surgical technique for ventral hernia repair. Between December 1, 2016, and November 30, 2017, 20 patients with symptomatic umbilical and/or epigastric hernias, and coexisting RD underwent a minimally invasive complete reconstruction of the midline through a small access route. The inner part of both incised and medialized anterior rectus sheaths was replaced by a fully absorbable synthetic mesh placed in a supraaponeurotic position. Patients were hospitalized for an average of 4 days and the mean operating time was 79 minutes. The mean hernia defect size was 1.5 cm in diameter and the mean mesh size was recorded as 15.8 cm in length and 5.2 cm in width. Two patients sustained surgical postoperative complications in terms of symptomatic seroma occurrences with successful interventional treatment.The early results (mean follow-up period of 5 months) showed no recurrences and only 1 patient reported occasional pain following exertion without rest. MILAR is a modification of the recently published endoscopic linea alba reconstruction restoring the normal anatomy of the abdominal wall. A new linea alba is formed with augmentation of autologous tissue consisting of the plicated anterior rectus sheaths. Supraaponeurotic placement of a fully absorbable synthetic mesh eliminates potential long-term mesh-associated complications. Regarding MILAR, there is no need for endoscopic equipment due to the uniquely designed flexible lighted retractors, meaning one assistant less is required.

  6. Flight evaluation of differential GPS aided inertial navigation systems

    NASA Technical Reports Server (NTRS)

    Mcnally, B. David; Paielli, Russell A.; Bach, Ralph E., Jr.; Warner, David N., Jr.

    1992-01-01

    Algorithms are described for integration of Differential Global Positioning System (DGPS) data with Inertial Navigation System (INS) data to provide an integrated DGPS/INS navigation system. The objective is to establish the benefits that can be achieved through various levels of integration of DGPS with INS for precision navigation. An eight state Kalman filter integration was implemented in real-time on a twin turbo-prop transport aircraft to evaluate system performance during terminal approach and landing operations. A fully integrated DGPS/INS system is also presented which models accelerometer and rate-gyro measurement errors plus position, velocity, and attitude errors. The fully integrated system was implemented off-line using range-domain (seventeen-state) and position domain (fifteen-state) Kalman filters. Both filter integration approaches were evaluated using data collected during the flight test. Flight-test data consisted of measurements from a 5 channel Precision Code GPS receiver, a strap-down Inertial Navigation Unit (INU), and GPS satellite differential range corrections from a ground reference station. The aircraft was laser tracked to determine its true position. Results indicate that there is no significant improvement in positioning accuracy with the higher levels of DGPS/INS integration. All three systems provided high-frequency (e.g., 20 Hz) estimates of position and velocity. The fully integrated system provided estimates of inertial sensor errors which may be used to improve INS navigation accuracy should GPS become unavailable, and improved estimates of acceleration, attitude, and body rates which can be used for guidance and control. Precision Code DGPS/INS positioning accuracy (root-mean-square) was 1.0 m cross-track and 3.0 m vertical. (This AGARDograph was sponsored by the Guidance and Control Panel.)

  7. A Remotely Operated Observatory for Minor Planet Photometry

    NASA Astrophysics Data System (ADS)

    Ditteon, Richard

    2008-05-01

    In October of 2007 Rose-Hulman Institute of Technology in Terre Haute, Indiana began operating the Oakley Southern Sky Observatory (E09) located near Siding Spring Observatory in New South Wales, Australia. The observatory houses a 0.5-m, f/8.4 Ritchey-Chretien telescope mounted on a Paramount ME, German equatorial mount. Attached to the telescope is an STL-1001E CCD camera which has 1024 by 1024, 24 µm pixels, a two-stage thermoelectric cooler, and built in color filter wheel with BVRI and clear filters. Image scale is 1.2 arcseconds per pixel. A cloud sensor is used to monitor sky conditions. The observatory has a roll-off roof with limit switches to detect when the roof is fully open and fully closed. In addition, a switch has been added to the mount to detect when the telescope is parked and that it is safe to open or close the roof. All of the hardware is controlled by a custom program which reads a simple text file containing the sequence of images and targets to be collected each night. The text file is loaded onto the control computer once each day, then the software waits until sunset to determine if the sky is clear. When conditions are favorable, power is turned on, the roof opens, twilight flats, dark and bias frames are recorded, and when it is fully dark data frames are recorded. Images are transferred via the Internet back to Rose-Hulman by another program running in the background. The observatory closes itself before dawn or if it gets cloudy. Currently we are using the observatory for photometry of minor planets. Students are responsible for selecting targets, processing the returned images, determining the period and light curve of each minor planet and writing a paper for publication. Recent results will be presented.

  8. Spatiotemporal assessment of water chemistry in intermittently open/closed coastal lakes of Southern Baltic

    NASA Astrophysics Data System (ADS)

    Astel, Aleksander M.; Bigus, Katarzyna; Obolewski, Krystian; Glińska-Lewczuk, Katarzyna

    2016-12-01

    Ionic profile, pH, electrolytic conductivity, chemical oxygen demand and concentration of selected heavy metals (Ni, Cu, Zn, Fe and Mn) were determined in water of 11 intermittently closed and open lakes and lagoons (ICOLLs) located in Polish coastline. Multidimensional data set was explored by the use of the self-organizing map (SOM) technique to avoid supervised and predictable division for fully isolated, partially and fully connected lakes. Water quality assessment based on single parameter's mean value allowed classification of majority of lakes to first or second class of purity according to regulation presenting classification approach applicable to uniform parts of surface waters. The SOM-based grouping revealed seven clusters comprising water samples of similar physico-chemical profile. Fully connected lakes were characterized by the highest concentration of components characteristic for sea salts (NaCl, MgCl2, MgSO4, CaSO4, K2SO4 and MgBr2), however spring samples from Łebsko were shifted to another cluster suggesting that intensive surface run-off and fresh-water inflow through Łupawa river decreases an impact of sea water intrusions. Forecasted characteristic of water collected in Resko Przymorskie lake was disturbed by high contamination by nitrites indicating accidental and local contamination due to usage of sodium nitrite for the curing of meat. Some unexpected sources of contamination was discovered in intermittently open and closed lakes. Presumably Zn contamination is due to use of wood preservatives to protect small wooden playgrounds or camping places spread around one of the lake, while increased concentration of Ni could be connected with grass and vegetation burning. Waters of Jamno lake are under the strongest anthropogenic impact due to inefficient removal of phosphates by waste water treatment plant and contamination by Fe and Mn caused by backwashing of absorption filters. Generally, the quality of ICOLLs' water was diversified, while anthropogenic impact as well as sea water intrusions determine its quality in temporal and spatial scale.∖

  9. Utilizing stretch-tunable thermochromic elastomeric opal films as novel reversible switchable photonic materials.

    PubMed

    Schäfer, Christian G; Lederle, Christina; Zentel, Kristina; Stühn, Bernd; Gallei, Markus

    2014-11-01

    In this work, the preparation of highly thermoresponsive and fully reversible stretch-tunable elastomeric opal films featuring switchable structural colors is reported. Novel particle architectures based on poly(diethylene glycol methylether methacrylate-co-ethyl acrylate) (PDEGMEMA-co-PEA) as shell polymer are synthesized via seeded and stepwise emulsion polymerization protocols. The use of DEGMEMA as comonomer and herein established synthetic strategies leads to monodisperse soft shell particles, which can be directly processed to opal films by using the feasible melt-shear organization technique. Subsequent UV crosslinking strategies open access to mechanically stable and homogeneous elastomeric opal films. The structural colors of the opal films feature mechano- and thermoresponsiveness, which is found to be fully reversible. Optical characterization shows that the combination of both stimuli provokes a photonic bandgap shift of more than 50 nm from 560 nm in the stretched state to 611 nm in the fully swollen state. In addition, versatile colorful patterns onto the colloidal crystal structure are produced by spatial UV-induced crosslinking by using a photomask. This facile approach enables the generation of spatially cross-linked switchable opal films with fascinating optical properties. Herein described strategies for the preparation of PDEGMEMA-containing colloidal architectures, application of the melt-shear ordering technique, and patterned crosslinking of the final opal films open access to novel stimuli-responsive colloidal crystal films, which are expected to be promising materials in the field of security and sensing applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Positive Affective Priming: A Behavioral Technique to Facilitate Therapeutic Engagement by Families, Caregivers, and Teachers

    ERIC Educational Resources Information Center

    Evans, Ian M.

    2010-01-01

    Affective priming is a technique used in experimental psychology to investigate the organization of emotional schemata not fully available to conscious awareness. The presentation of stimuli (the prime) with strong positive emotional valence alters the accessibility of positive stimuli within the individual's emotionally encoded cognitive system.…

  11. Open Lung Approach for the Acute Respiratory Distress Syndrome: A Pilot, Randomized Controlled Trial.

    PubMed

    Kacmarek, Robert M; Villar, Jesús; Sulemanji, Demet; Montiel, Raquel; Ferrando, Carlos; Blanco, Jesús; Koh, Younsuck; Soler, Juan Alfonso; Martínez, Domingo; Hernández, Marianela; Tucci, Mauro; Borges, Joao Batista; Lubillo, Santiago; Santos, Arnoldo; Araujo, Juan B; Amato, Marcelo B P; Suárez-Sipmann, Fernando

    2016-01-01

    The open lung approach is a mechanical ventilation strategy involving lung recruitment and a decremental positive end-expiratory pressure trial. We compared the Acute Respiratory Distress Syndrome network protocol using low levels of positive end-expiratory pressure with open lung approach resulting in moderate to high levels of positive end-expiratory pressure for the management of established moderate/severe acute respiratory distress syndrome. A prospective, multicenter, pilot, randomized controlled trial. A network of 20 multidisciplinary ICUs. Patients meeting the American-European Consensus Conference definition for acute respiratory distress syndrome were considered for the study. At 12-36 hours after acute respiratory distress syndrome onset, patients were assessed under standardized ventilator settings (FIO2≥0.5, positive end-expiratory pressure ≥10 cm H2O). If Pao2/FIO2 ratio remained less than or equal to 200 mm Hg, patients were randomized to open lung approach or Acute Respiratory Distress Syndrome network protocol. All patients were ventilated with a tidal volume of 4 to 8 ml/kg predicted body weight. From 1,874 screened patients with acute respiratory distress syndrome, 200 were randomized: 99 to open lung approach and 101 to Acute Respiratory Distress Syndrome network protocol. Main outcome measures were 60-day and ICU mortalities, and ventilator-free days. Mortality at day-60 (29% open lung approach vs. 33% Acute Respiratory Distress Syndrome Network protocol, p = 0.18, log rank test), ICU mortality (25% open lung approach vs. 30% Acute Respiratory Distress Syndrome network protocol, p = 0.53 Fisher's exact test), and ventilator-free days (8 [0-20] open lung approach vs. 7 [0-20] d Acute Respiratory Distress Syndrome network protocol, p = 0.53 Wilcoxon rank test) were not significantly different. Airway driving pressure (plateau pressure - positive end-expiratory pressure) and PaO2/FIO2 improved significantly at 24, 48 and 72 hours in patients in open lung approach compared with patients in Acute Respiratory Distress Syndrome network protocol. Barotrauma rate was similar in both groups. In patients with established acute respiratory distress syndrome, open lung approach improved oxygenation and driving pressure, without detrimental effects on mortality, ventilator-free days, or barotrauma. This pilot study supports the need for a large, multicenter trial using recruitment maneuvers and a decremental positive end-expiratory pressure trial in persistent acute respiratory distress syndrome.

  12. Characterization of different bubble formulations for blood-brain barrier opening using a focused ultrasound system with acoustic feedback control.

    PubMed

    Bing, Chenchen; Hong, Yu; Hernandez, Christopher; Rich, Megan; Cheng, Bingbing; Munaweera, Imalka; Szczepanski, Debra; Xi, Yin; Bolding, Mark; Exner, Agata; Chopra, Rajiv

    2018-05-22

    Focused ultrasound combined with bubble-based agents serves as a non-invasive way to open the blood-brain barrier (BBB). Passive acoustic detection was well studied recently to monitor the acoustic emissions induced by the bubbles under ultrasound energy, but the ability to perform reliable BBB opening with a real-time feedback control algorithm has not been fully evaluated. This study focuses on characterizing the acoustic emissions of different types of bubbles: Optison, Definity, and a custom-made nanobubble. Their performance on reliable BBB opening under real-time feedback control based on acoustic detection was evaluated both in-vitro and in-vivo. The experiments were conducted using a 0.5 MHz focused ultrasound transducer with in-vivo focal pressure ranges from 0.1-0.7 MPa. Successful feedback control was achieved with all three agents when combining with infusion injection. Localized opening was confirmed with Evans blue dye leakage. Microscopic images were acquired to review the opening effects. Under similar total gas volume, nanobubble showed a more reliable opening effect compared to Optison and Definity (p < 0.05). The conclusions obtained from this study confirm the possibilities of performing stable opening using a feedback control algorithm combined with infusion injection. It also opens another potential research area of BBB opening using sub-micron bubbles.

  13. Replacing Military Personnel in Some Support Positions With Federal Civilians

    DTIC Science & Technology

    2016-07-03

    Commercial and Open to Contractors Commercial but Not Open to  Contractors Inherently Governmental 6CONGRESS IONAL  BUDGET  OFFICE Two main job categories...agreements 9CONGRESS IONAL  BUDGET  OFFICE Military Positions in Commercial Functions Not Open to  Contractors , by Reason, 2012 Thousands Army Navy Air

  14. Mobile service for open data visualization on geo-based images

    NASA Astrophysics Data System (ADS)

    Lee, Kiwon; Kim, Kwangseob; Kang, Sanggoo

    2015-12-01

    Since the early 2010s, governments in most countries have adopted and promoted open data policy and open data platform. Korea are in the same situation, and government and public organizations have operated the public-accessible open data portal systems since 2011. The number of open data and data type have been increasing every year. These trends are more expandable or extensible on mobile environments. The purpose of this study is to design and implement a mobile application service to visualize various typed or formatted public open data with geo-based images on the mobile web. Open data cover downloadable data sets or open-accessible data application programming interface API. Geo-based images mean multi-sensor satellite imageries which are referred in geo-coordinates and matched with digital map sets. System components for mobile service are fully based on open sources and open development environments without any commercialized tools: PostgreSQL for database management system, OTB for remote sensing image processing, GDAL for data conversion, GeoServer for application server, OpenLayers for mobile web mapping, R for data analysis and D3.js for web-based data graphic processing. Mobile application in client side was implemented by using HTML5 for cross browser and cross platform. The result shows many advantageous points such as linking open data and geo-based data, integrating open data and open source, and demonstrating mobile applications with open data. It is expected that this approach is cost effective and process efficient implementation strategy for intelligent earth observing data.

  15. dsmcFoam+: An OpenFOAM based direct simulation Monte Carlo solver

    NASA Astrophysics Data System (ADS)

    White, C.; Borg, M. K.; Scanlon, T. J.; Longshaw, S. M.; John, B.; Emerson, D. R.; Reese, J. M.

    2018-03-01

    dsmcFoam+ is a direct simulation Monte Carlo (DSMC) solver for rarefied gas dynamics, implemented within the OpenFOAM software framework, and parallelised with MPI. It is open-source and released under the GNU General Public License in a publicly available software repository that includes detailed documentation and tutorial DSMC gas flow cases. This release of the code includes many features not found in standard dsmcFoam, such as molecular vibrational and electronic energy modes, chemical reactions, and subsonic pressure boundary conditions. Since dsmcFoam+ is designed entirely within OpenFOAM's C++ object-oriented framework, it benefits from a number of key features: the code emphasises extensibility and flexibility so it is aimed first and foremost as a research tool for DSMC, allowing new models and test cases to be developed and tested rapidly. All DSMC cases are as straightforward as setting up any standard OpenFOAM case, as dsmcFoam+ relies upon the standard OpenFOAM dictionary based directory structure. This ensures that useful pre- and post-processing capabilities provided by OpenFOAM remain available even though the fully Lagrangian nature of a DSMC simulation is not typical of most OpenFOAM applications. We show that dsmcFoam+ compares well to other well-known DSMC codes and to analytical solutions in terms of benchmark results.

  16. Open Rotor Aeroacoustic Installation Effects for Conventional and Unconventional Airframes

    NASA Technical Reports Server (NTRS)

    Czech, Michael J.; Thomas, Russell H.

    2013-01-01

    As extensive experimental campaign was performed to study the aeroacoustic installation effects of an open rotor with respect to both a conventional tube and wing type airframe and an unconventional hybrid wing body airframe. The open rotor rig had two counter rotating rows of blades each with eight blades of a design originally flight tested in the 1980s. The aeroacoustic installation effects measured in an aeroacoustic wind tunnel included those from flow effects due to inflow distortion or wake interaction and acoustic propagation effects such as shielding and reflection. The objective of the test campaign was to quantify the installation effects for a wide range of parameters and configurations derived from the two airframe types. For the conventional airframe, the open rotor was positioned in increments in front of and then over the main wing and then in positions representative of tail mounted aircraft with a conventional tail, a T-tail and a U-tail. The interaction of the wake of the open rotor as well as acoustic scattering results in an increase of about 10 dB when the rotor is positioned in front of the main wing. When positioned over the main wing a substantial amount of noise reduction is obtained and this is also observed for tail-mounted installations with a large U-tail. For the hybrid wing body airframe, the open rotor was positioned over the airframe along the centerline as well as off-center representing a twin engine location. A primary result was the documentation of the noise reduction from shielding as a function of the location of the open rotor upstream of the trailing edge of the hybrid wing body. The effects from vertical surfaces and elevon deflection were also measured. Acoustic lining was specially designed and inserted flush with the elevon and airframe surface, the result was an additional reduction in open rotor noise propagating to the far field microphones. Even with the older blade design used, the experiment provided quantification of the aeroacoustic installation effects for a wide range of open rotor and airframe configurations and can be used with data processing methods to evaluate the aeroacoustic installation effects for open rotors with modern blade designs.

  17. Ancient plate kinematics derived from the deformation pattern of continental crust: Paleo- and Neo-Tethys opening coeval with prolonged Gondwana-Laurussia convergence

    NASA Astrophysics Data System (ADS)

    Kroner, Uwe; Roscher, Marco; Romer, Rolf L.

    2016-06-01

    The formation and destruction of supercontinents requires prolonged convergent tectonics between particular plates, followed by intra-continental extension during subsequent breakup stages. A specific feature of the Late Paleozoic supercontinent Pangea is the prolonged and diachronous formation of the collisional belts of the Rheic suture zone coeval with recurrent continental breakup and subsequent formation of the mid-ocean ridge systems of the Paleo- and Neo-Tethys oceans at the Devonian and Permian margins of the Gondwana plate, respectively. To decide whether these processes are causally related or not, it is necessary to accurately reconstruct the plate motion of Gondwana relative to Laurussia. Here we propose that the strain pattern preserved in the continental crust can be used for the reconstruction of ancient plate kinematics. We present Euler pole locations for the three fundamental stages of the Late Paleozoic assembly of Pangea and closure of the Rheic Ocean: (I) Early Devonian (ca. 400 Ma) collisional tectonics affected Gondwana at the Armorican Spur north of western Africa and at the promontory of the South China block/Australia of eastern Gondwana, resulting in the Variscan and the Qinling orogenies, respectively. The Euler pole of the rotational axis between Gondwana and Laurussia is positioned east of Gondwana close to Australia. (II) Continued subduction of the western Rheic Ocean initiates the clockwise rotation of Gondwana that is responsible for the separation of the South China block from Gondwana and the opening of Paleo-Tethys during the Late Devonian. The position of the rotational axis north of Africa reveals a shift of the Euler pole to the west. (III) The terminal closure of the Rheic Ocean resulted in the final tectonics of the Alleghanides, the Mauritanides and the Ouachita-Sonora-Marathon belt, occurred after the cessation of the Variscan orogeny in Central Europe, and is coeval with the formation of the Central European Extensional Province and the opening of Neo-Tethys at ca. 300 Ma. The Euler pole for the final closure of the Rheic Ocean is positioned near Oslo (Laurussia). Thus, the concomitant formation of convergent and divergent plate boundaries during the assembly of Pangea is due to the relocation of the particular rotational axis. From a geodynamic point of view, coupled collisional (western Pangea) and extensional tectonics (eastern Pangea) due to plate tectonic reorganization is fully explained by slab pull and ridge push forces.

  18. Fully gapped spin-singlet superconductivity in noncentrosymmetric PbTaSe2: 207Pb nuclear magnetic resonance study

    NASA Astrophysics Data System (ADS)

    Maeda, S.; Matano, K.; Zheng, Guo-qing

    2018-05-01

    We report the 207Pb nuclear magnetic resonance (NMR) measurements on polycrystalline sample of PbTaSe2 with noncentrosymmetric crystal structure and topological electronic band. The nuclear spin-lattice relaxation rate 1 /T1 shows a suppressed coherence peak below the superconducting transition temperature Tc=4.05 K and decreases as an exponential function of temperature. The penetration depth derived from the NMR spectrum is almost temperature independent below T =0.7 Tc. The Knight shift K decreases below Tc. These results suggest spin-singlet superconductivity with a fully opened gap 2 Δ =3.5 kBTc in PbTaSe2.

  19. Using Fully Coupled Hydro-Geomechanical Numerical Test Bed to Study Reservoir Stimulation with Low Hydraulic Pressure

    DOE Data Explorer

    Fu, Pengcheng; Johnson, Scott M.; Carrigan, Charles R.

    2012-01-31

    This paper documents our effort to use a fully coupled hydro-geomechanical numerical test bed to study using low hydraulic pressure to stimulate geothermal reservoirs with existing fracture network. In this low pressure stimulation strategy, fluid pressure is lower than the minimum in situ compressive stress, so the fractures are not completely open but permeability improvement can be achieved through shear dilation. We found that in this low pressure regime, the coupling between the fluid phase and the rock solid phase becomes very simple, and the numerical model can achieve a low computational cost. Using this modified model, we study the behavior of a single fracture and a random fracture network.

  20. Preventing Adolescent Social Anxiety and Depression and Reducing Peer Victimization: Intervention Development and Open Trial

    ERIC Educational Resources Information Center

    La Greca, Annette M.; Ehrenreich-May, Jill; Mufson, Laura; Chan, Sherilynn

    2016-01-01

    Background: Social anxiety disorder (SAD) and depression are common among adolescents, frequently comorbid, and resistant to change. Prevention programs for adolescent SAD are scant, and depression prevention programs do not fully address peer-risk factors. One critical peer-risk factor for SAD and depression is peer victimization. We describe the…

  1. Compatibility between Text Mining and Qualitative Research in the Perspectives of Grounded Theory, Content Analysis, and Reliability

    ERIC Educational Resources Information Center

    Yu, Chong Ho; Jannasch-Pennell, Angel; DiGangi, Samuel

    2011-01-01

    The objective of this article is to illustrate that text mining and qualitative research are epistemologically compatible. First, like many qualitative research approaches, such as grounded theory, text mining encourages open-mindedness and discourages preconceptions. Contrary to the popular belief that text mining is a linear and fully automated…

  2. Wikipedia: How It Works and How It Can Work for You

    ERIC Educational Resources Information Center

    Nix, Elizabeth M.

    2010-01-01

    Many history professors have been reluctant to authorize students to use Wikipedia in their classwork because they do not fully trust the open source encyclopedia. But as increasing numbers of scholars and teachers work with Wikipedia, its influence becomes undeniable. In this article, the author describes how Wikipedia works and how she made…

  3. Species Profiles. Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (Gulf of Mexico). American Oyster.

    DTIC Science & Technology

    1986-07-01

    valves when fully oyster (Butler 1954). Its range closed. extends to the Yucatan Peninsula of Mexico and to Venezuela. Along the Shel. shape is... nutritional factors which affect report on the 1950 opening. Pubi. the growth and setting of the Inst. Mar. Sci. Univ. Texas. larvae of the oyster

  4. Personal Learning Environments in the Workplace: An Exploratory Study into the Key Business Decision Factors

    ERIC Educational Resources Information Center

    Chatterjee, Arunangsu; Law, Effie Lai-Chong; Mikroyannidis, Alexander; Owen, Glyn; Velasco, Karen

    2013-01-01

    Personal Learning Environments (PLEs) have emerged as a solution to the need of learners for open and easily customisable learning environments. PLEs essentially hand complete control over the learning process to the learner. However, this learning model is not fully compatible with learning in the workplace, which is influenced by certain…

  5. Impacts of rising tropospheric ozone on photosynthesis and metabolite levels on field grown soybean

    USDA-ARS?s Scientific Manuscript database

    The response of leaf photosynthesis and metabolite profiles to ozone (O3) exposure ranging from 37 to 116 nL L-1 was investigated in two soybean cultivars Dwight and IA3010 in the field under fully open-air conditions. Leaf photosynthesis, total non-structural carbohydrates (TNC) and total free amin...

  6. 78 FR 20315 - Columbia Gas Transmission, LLC; Notice of Request under Blanket Authorization

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-04

    ... Coco C Storage Fields in West Virginia. Columbia states that, as a result of storage field tests, the overall capacity of these fields can be increased. Columbia does not propose to expand the boundaries... fields, all as more fully set forth in the application, which is on file with the Commission and open to...

  7. From Trace Evidence to Bioinformatics: Putting Bryophytes into Molecular Biology Education

    ERIC Educational Resources Information Center

    Fuselier, Linda; Bougary, Azhar; Malott, Michelle

    2011-01-01

    Students benefit most from their science education when they participate fully in the process of science in the context of real-world problems. We describe a student-directed open-inquiry lab experience that has no predetermined outcomes and requires students to engage in all components of scientific inquiry from posing a question through…

  8. Sniffing position combined with mouth opening improves facemask ventilation in children with adenotonsillar hypertrophy.

    PubMed

    Cuvas, O; Dikmen, B; Yucel, F

    2011-05-01

    This study evaluates the influence of sniffing position combined with mouth opening on the effectiveness of facemask ventilation in paralyzed pediatric patients undergoing adenotonsillectomy during sevoflurane-N(2)O anesthesia. After Institutional Ethics Committee approval, 40 children 5-11 years of age who were scheduled for an elective adenotonsillectomy operation were enrolled in this prospective randomized study. After routine monitoring and pre-oxygenation, anesthesia was induced with sevoflurane 8% in a mixture of 50% N(2)O-O(2). Three minutes after the administration of vecuronium, the sequence of the positions was randomized. Three positions were applied during facemask ventilation: Position CN (closed mouth - neutral head and neck position), position CS (closed mouth-sniffing position) and position OS (opened mouth-sniffing position). Volume-controlled ventilation was started. Peak inspiratory pressure (PIP), tidal volume (V(T)), expired tidal volume (V(Texp)) and end-tidal CO(2) pressure were recorded. The percent of leakage was calculated. The primary endpoint of this study was the expired tidal volume (V(Texp)). There was a statistically significant difference among the three positions for V(Texp) and PIP values. The OS resulted in higher V(Texp) values when compared with CN (P=0.022). The OS was significantly better than the other two positions, resulting in lower PIP values (P<0.001 and P=0.004, for CN and CS, respectively). The OS also resulted in less leakage during facemask ventilation when compared with CN and CS. Sniffing position combined with mouth opening improves V(Texp) and PIP values during facemask ventilation during sevoflurane-N(2)O anesthesia in paralyzed pediatric patients with adenotonsillar hypertrophy.

  9. Vision-based sensing for autonomous in-flight refueling

    NASA Astrophysics Data System (ADS)

    Scott, D.; Toal, M.; Dale, J.

    2007-04-01

    A significant capability of unmanned airborne vehicles (UAV's) is that they can operate tirelessly and at maximum efficiency in comparison to their human pilot counterparts. However a major limiting factor preventing ultra-long endurance missions is that they require landing to refuel. Development effort has been directed to allow UAV's to automatically refuel in the air using current refueling systems and procedures. The 'hose & drogue' refueling system was targeted as it is considered the more difficult case. Recent flight trials resulted in the first-ever fully autonomous airborne refueling operation. Development has gone into precision GPS-based navigation sensors to maneuver the aircraft into the station-keeping position and onwards to dock with the refueling drogue. However in the terminal phases of docking, the accuracy of the GPS is operating at its performance limit and also disturbance factors on the flexible hose and basket are not predictable using an open-loop model. Hence there is significant uncertainty on the position of the refueling drogue relative to the aircraft, and is insufficient in practical operation to achieve a successful and safe docking. A solution is to augment the GPS based system with a vision-based sensor component through the terminal phase to visually acquire and track the drogue in 3D space. The higher bandwidth and resolution of camera sensors gives significantly better estimates on the state of the drogue position. Disturbances in the actual drogue position caused by subtle aircraft maneuvers and wind gusting can be visually tracked and compensated for, providing an accurate estimate. This paper discusses the issues involved in visually detecting a refueling drogue, selecting an optimum camera viewpoint, and acquiring and tracking the drogue throughout a widely varying operating range and conditions.

  10. Subtypes of the Type II Pit Pattern Reflect Distinct Molecular Subclasses in the Serrated Neoplastic Pathway.

    PubMed

    Aoki, Hironori; Yamamoto, Eiichiro; Yamano, Hiro-O; Sugai, Tamotsu; Kimura, Tomoaki; Tanaka, Yoshihito; Matsushita, Hiro-O; Yoshikawa, Kenjiro; Takagi, Ryo; Harada, Eiji; Nakaoka, Michiko; Yoshida, Yuko; Harada, Taku; Sudo, Gota; Eizuka, Makoto; Yorozu, Akira; Kitajima, Hiroshi; Niinuma, Takeshi; Kai, Masahiro; Nojima, Masanori; Suzuki, Hiromu; Nakase, Hiroshi

    2018-03-15

    Colorectal serrated lesions (SLs) are important premalignant lesions whose clinical and biological features are not fully understood. We aimed to establish accurate colonoscopic diagnosis and treatment of SLs through evaluation of associations among the morphological, pathological, and molecular characteristics of SLs. A total of 388 premalignant and 18 malignant colorectal lesions were studied. Using magnifying colonoscopy, microsurface structures were assessed based on Kudo's pit pattern classification system, and the Type II pit pattern was subcategorized into classical Type II, Type II-Open (Type II-O) and Type II-Long (Type II-L). BRAF/KRAS mutations and DNA methylation of CpG island methylator phenotype (CIMP) markers (MINT1, - 2, - 12, - 31, p16, and MLH1) were analyzed through pyrosequencing. Type II-O was tightly associated with sessile serrated adenoma/polyps (SSA/Ps) with BRAF mutation and CIMP-high. Most lesions with simple Type II or Type II-L were hyperplastic polyps, while mixtures of Type II or Type II-L plus more advanced pit patterns (III/IV) were characteristic of traditional serrated adenomas (TSAs). Type II-positive TSAs frequently exhibited BRAF mutation and CIMP-low, while Type II-L-positive TSAs were tightly associated with KRAS mutation and CIMP-low. Analysis of lesions containing both premalignant and cancerous components suggested Type II-L-positive TSAs may develop into KRAS-mutated/CIMP-low/microsatellite stable cancers, while Type II-O-positive SSA/Ps develop into BRAF-mutated/CIMP-high/microsatellite unstable cancers. These results suggest that Type II subtypes reflect distinct molecular subclasses in the serrated neoplasia pathway and that they could be useful hallmarks for identifying SLs at high risk of developing into CRC.

  11. Dual-latching solenoid-actuated valve assembly

    NASA Technical Reports Server (NTRS)

    Brudnicki, Myron J. (Inventor); Yang, Jeff (Inventor)

    1994-01-01

    A tube-type shutoff valve is electrically positioned to its open or closed position by a concentric electromagnetic solenoid. The valve is dual latching in that the armature of the solenoid maintains the sliding tube of the valve in an open or closed position by means of permanent magnets which are effective when current is not supplied to the solenoid. The valve may also be actuated manually.

  12. Comparative study of open and arthroscopic coracoid transfer for shoulder anterior instability (Latarjet)-computed tomography evaluation at a short term follow-up. Part II.

    PubMed

    Kordasiewicz, Bartłomiej; Kicinski, Maciej; Małachowski, Konrad; Wieczorek, Janusz; Chaberek, Sławomir; Pomianowski, Stanisław

    2018-05-01

    The aim of this study was to evaluate and to compare the radiological parameters after arthroscopic and open Latarjet technique via evaluation of computed tomography (CT) scans. Our hypothesis was that the radiological results after arthroscopic stabilisation remained in the proximity of those results achieved after open stabilisation. CT scan evaluation results of patients after primary Latarjet procedure were analysed. Patients operated on between 2006 and 2011 using an open technique composed the OPEN group and patients operated on arthroscopically between 2011 and 2013 composed the ARTHRO group. Forty-three out of 55 shoulders (78.2%) in OPEN and 62 out of 64 shoulders (95.3%) in ARTHRO were available for CT scan evaluation. The average age at surgery was 28 years in OPEN and 26 years in ARTHRO. The mean follow-up was 54.2 months in OPEN and 23.4 months in ARTHRO. CT scan evaluation was used to assess graft fusion and osteolysis. Bone block position and screw orientation were assessed in the axial and the sagittal views. The subscapularis muscle fatty infiltration was evaluated according to Goutallier classification. The non-union rate was significantly higher in OPEN than in ARTHRO: 5 (11.9%) versus 1 (1.7%) (p < 0.05). The total graft osteolysis was significantly higher in the OPEN group: five cases (11.9%) versus zero in ARTHRO (p < 0.05). Graft fracture incidence was comparable in both groups: in two patients in ARTHRO (3.3%) and one case (2.4%) in the OPEN group (p > 0.05). These results should be evaluated very carefully due to significant difference in the follow-up of both groups. A significantly higher rate of partial graft osteolysis at the level of the superior screw was reported in ARTHRO with 32 patients (53.3%) versus 10 (23.8%) in OPEN (p < 0.05). In the axial view, 78.4% of patients in ARTHRO and 80.5% in OPEN had the coracoid bone block in an acceptable position (between 4 mm medially and 2 mm laterally). In the sagittal plane, the bone block was in an acceptable position between 2 and 5 o'clock in 86.7% of patients in ARTHRO and 90.2% in OPEN (p > 0.05). However, in the position between 3 and 5 o'clock there were 56.7% of the grafts in ARTHRO versus 87.8% in OPEN (p < 0.05). The screws were more parallel to the glenoid surface in ARTHRO-the angles were 12.3° for the inferior screw and 12.6° for the superior one. These angles in the OPEN group were respectively 15° and 17° (p < 0.05 and for the superior screw). There was no significant difference in the presence of fatty infiltration of the subscapularis muscle. Arthroscopic Latarjet stabilisation showed satisfactory radiographic results, comparable to the open procedure, however the short-term follow-up can bias this evaluation. Graft healing rate was very high in the arthroscopic technique, but yet osteolysis of the superior part of the graft and more superior graft position in the sagittal view were significantly different when compared to the open technique. The screw position was slightly more parallel to the glenoid via the arthroscopic technique. We recommend both further investigation and development of the arthroscopic technique. III.

  13. Closed-loop control of gimbal-less MEMS mirrors for increased bandwidth in LiDAR applications

    NASA Astrophysics Data System (ADS)

    Milanović, Veljko; Kasturi, Abhishek; Yang, James; Hu, Frank

    2017-05-01

    In 2016, we presented a low SWaP wirelessly controlled MEMS mirror-based LiDAR prototype which utilized an OEM laser rangefinder for distance measurement [1]. The MEMS mirror was run in open loop based on its exceptionally fast design and high repeatability performance. However, to further extend the bandwidth and incorporate necessary eyesafety features, we recently focused on providing mirror position feedback and running the system in closed loop control. Multiple configurations of optical position sensors, mounted on both the front- and the back-side of the MEMS mirror, have been developed and will be presented. In all cases, they include a light source (LED or laser) and a 2D photosensor. The most compact version is mounted on the backside of the MEMS mirror ceramic package and can "view" the mirror's backside through openings in the mirror's PCB and its ceramic carrier. This version increases the overall size of the MEMS mirror submodule from 12mm x 12mm x 4mm to 15mm x 15mm x 7mm. The sensors also include optical and electronic filtering to reduce effects of any interference from the application laser illumination. With relatively simple FPGA-based PID control running at the sample rate of 100 kHz, we could configure the overall response of the system to fully utilize the MEMS mirror's native bandwidth which extends well beyond its first resonance. When compared to the simple open loop method of suppressing overshoot and ringing which significantly limits bandwidth utilization, running the mirrors in closed loop control increased the bandwidth to nearly 3.7 times. A 2.0mm diameter integrated MEMS mirror with a resonant frequency of 1300 Hz was limited to 500Hz bandwidth in open loop driving but was increased to 3kHz bandwidth with the closed loop controller. With that bandwidth it is capable of very sharply defined uniform-velocity scans (sawtooth or triangle waveforms) which are highly desired in scanned mirror LiDAR systems. A 2.4mm diameter mirror with +/-12° of scan angle achieves over 1.3kHz of flat response, allowing sharp triangle waveforms even at 300Hz (600 uniform velocity lines per second). The same methodology is demonstrated with larger, bonded mirrors. Here closed loop control is more challenging due to the additional resonance and a more complex system dynamic. Nevertheless, results are similar - a 5mm diameter mirror bandwidth was increased from 150Hz to 500Hz.

  14. Apparatus for retaining and releasing a payload

    NASA Technical Reports Server (NTRS)

    Carrier, Alain (Inventor); Cobb, Bruce (Inventor)

    2000-01-01

    An apparatus for latching an object, such as a payload for a space vehicle, includes an expandible latch which is shifted between a relaxed open condition and a flexed closed condition by actuation of a pair of temperature-responsive members, such as shaped memory alloy (SMA) coil springs. One of the two temperature-responsive members biases an actuator into a first position that allows the expandible latch to open. The other SMA member biases the actuator in the opposite position to close the expandible latch. Heating the appropriate SMA member causes the actuator to move from one position to the other position. In the preferred embodiment, no power is required to maintain the actuator in either position once the position has been established. For example, the actuator may have a rest position that allows the expandible latch to remain open when the two SMA members are cooled and allowed to reach an equilibrium condition with respect to applied force to the actuator. A detent-and-ball arrangement may be used to maintain the position of the actuator after the expandible latch has been closed.

  15. Focused Ultrasound-Induced Blood-Brain Barrier Opening: Association with Mechanical Index and Cavitation Index Analyzed by Dynamic Contrast-Enhanced Magnetic-Resonance Imaging

    NASA Astrophysics Data System (ADS)

    Chu, Po-Chun; Chai, Wen-Yen; Tsai, Chih-Hung; Kang, Shih-Tsung; Yeh, Chih-Kuang; Liu, Hao-Li

    2016-09-01

    Focused ultrasound (FUS) with microbubbles can temporally open the blood-brain barrier (BBB), and the cavitation activities of microbubbles play a key role in the BBB-opening process. Previous attempts used contrast-enhanced magnetic resonance imaging (CE-MRI) to correlate the mechanical index (MI) with the scale of BBB-opening, but MI only partially gauged acoustic activities, and CE-MRI did not fully explore correlations of pharmacodynamic/pharmacokinetic behaviors. Recently, the cavitation index (CI) has been derived to serve as an indicator of microbubble-ultrasound stable cavitation, and may also serve as a valid indicator to gauge the level of FUS-induced BBB opening. This study investigates the feasibility of gauging FUS-induced BBB opened level via the two indexes, MI and CI, through dynamic contrast-enhanced (DCE)-MRI analysis as well as passive cavitation detection (PCD) analysis. Pharmacodynamic/pharmacokinetic parameters derived from DCE-MRI were characterized to identify the scale of FUS-induced BBB opening. Our results demonstrated that DCE-MRI can successfully access pharmacodynamic/pharmacokinetic BBB-opened behavior, and was highly correlated both with MI and CI, implying the feasibility in using these two indices to gauge the scale of FUS-induced BBB opening. The proposed finding may facilitate the design toward using focused ultrasound as a safe and reliable noninvasive CNS drug delivery.

  16. Stories from OpenAQ, a Global and Grassroots Open Air Quality Community

    NASA Astrophysics Data System (ADS)

    Hasenkopf, C. A.; Flasher, J. C.; Veerman, O.; Scalamogna, A.; Silva, D.; Salmon, M.; Buuralda, D.; DeWitt, L. H.

    2016-12-01

    Air pollution, responsible for more deaths each year than HIV/AIDS and malaria, combined, is a global public health crisis. Yet many scientific questions, including those directly relevant for policy, remain unanswered when it comes to the impact of air pollution on health in highly polluted environments. Often, specific solutions to improving air quality are local and sustained through public engagement, policy and monitoring. Both the overarching science of air quality and health and local solutions rely on access to reliable, timely air quality data. Over the past year, the OpenAQ community has opened up existing disparate air quality data in 24 countries through an open source platform (openaq.org) so that communities around the world can use it to advance science, public engagement, and policy. We will share stories of communities, from Delhi to Ulaanbaatar and from scientists to journalists, using open air quality data from our platform to advance their fight against air inequality. We will share recent research we have conducted on best practices for engaging different communities and building tools that enable the public to fully unleash the power of open air quality data to fight air inequality. The subsequent open-source tools (github.com/openaq) we have developed from this research and our entire data-sharing platform may be of interest to other open data communities.

  17. Focused Ultrasound-Induced Blood-Brain Barrier Opening: Association with Mechanical Index and Cavitation Index Analyzed by Dynamic Contrast-Enhanced Magnetic-Resonance Imaging.

    PubMed

    Chu, Po-Chun; Chai, Wen-Yen; Tsai, Chih-Hung; Kang, Shih-Tsung; Yeh, Chih-Kuang; Liu, Hao-Li

    2016-09-15

    Focused ultrasound (FUS) with microbubbles can temporally open the blood-brain barrier (BBB), and the cavitation activities of microbubbles play a key role in the BBB-opening process. Previous attempts used contrast-enhanced magnetic resonance imaging (CE-MRI) to correlate the mechanical index (MI) with the scale of BBB-opening, but MI only partially gauged acoustic activities, and CE-MRI did not fully explore correlations of pharmacodynamic/pharmacokinetic behaviors. Recently, the cavitation index (CI) has been derived to serve as an indicator of microbubble-ultrasound stable cavitation, and may also serve as a valid indicator to gauge the level of FUS-induced BBB opening. This study investigates the feasibility of gauging FUS-induced BBB opened level via the two indexes, MI and CI, through dynamic contrast-enhanced (DCE)-MRI analysis as well as passive cavitation detection (PCD) analysis. Pharmacodynamic/pharmacokinetic parameters derived from DCE-MRI were characterized to identify the scale of FUS-induced BBB opening. Our results demonstrated that DCE-MRI can successfully access pharmacodynamic/pharmacokinetic BBB-opened behavior, and was highly correlated both with MI and CI, implying the feasibility in using these two indices to gauge the scale of FUS-induced BBB opening. The proposed finding may facilitate the design toward using focused ultrasound as a safe and reliable noninvasive CNS drug delivery.

  18. Development and Deployment of the OpenMRS-Ebola Electronic Health Record System for an Ebola Treatment Center in Sierra Leone

    PubMed Central

    Jazayeri, Darius; Teich, Jonathan M; Ball, Ellen; Nankubuge, Patricia Alexandra; Rwebembera, Job; Wing, Kevin; Sesay, Alieu Amara; Kanter, Andrew S; Ramos, Glauber D; Walton, David; Cummings, Rachael; Checchi, Francesco; Fraser, Hamish S

    2017-01-01

    Background Stringent infection control requirements at Ebola treatment centers (ETCs), which are specialized facilities for isolating and treating Ebola patients, create substantial challenges for recording and reviewing patient information. During the 2014-2016 West African Ebola epidemic, paper-based data collection systems at ETCs compromised the quality, quantity, and confidentiality of patient data. Electronic health record (EHR) systems have the potential to address such problems, with benefits for patient care, surveillance, and research. However, no suitable software was available for deployment when large-scale ETCs opened as the epidemic escalated in 2014. Objective We present our work on rapidly developing and deploying OpenMRS-Ebola, an EHR system for the Kerry Town ETC in Sierra Leone. We describe our experience, lessons learned, and recommendations for future health emergencies. Methods We used the OpenMRS platform and Agile software development approaches to build OpenMRS-Ebola. Key features of our work included daily communications between the development team and ground-based operations team, iterative processes, and phased development and implementation. We made design decisions based on the restrictions of the ETC environment and regular user feedback. To evaluate the system, we conducted predeployment user questionnaires and compared the EHR records with duplicate paper records. Results We successfully built OpenMRS-Ebola, a modular stand-alone EHR system with a tablet-based application for infectious patient wards and a desktop-based application for noninfectious areas. OpenMRS-Ebola supports patient tracking (registration, bed allocation, and discharge); recording of vital signs and symptoms; medication and intravenous fluid ordering and monitoring; laboratory results; clinician notes; and data export. It displays relevant patient information to clinicians in infectious and noninfectious zones. We implemented phase 1 (patient tracking; drug ordering and monitoring) after 2.5 months of full-time development. OpenMRS-Ebola was used for 112 patient registrations, 569 prescription orders, and 971 medication administration recordings. We were unable to fully implement phases 2 and 3 as the ETC closed because of a decrease in new Ebola cases. The phase 1 evaluation suggested that OpenMRS-Ebola worked well in the context of the rollout, and the user feedback was positive. Conclusions To our knowledge, OpenMRS-Ebola is the most comprehensive adaptable clinical EHR built for a low-resource setting health emergency. It is designed to address the main challenges of data collection in highly infectious environments that require robust infection prevention and control measures and it is interoperable with other electronic health systems. Although we built and deployed OpenMRS-Ebola more rapidly than typical software, our work highlights the challenges of having to develop an appropriate system during an emergency rather than being able to rapidly adapt an existing one. Lessons learned from this and previous emergencies should be used to ensure that a set of well-designed, easy-to-use, pretested health software is ready for quick deployment in future. PMID:28827211

  19. How does a planet excite multiple spiral arms?

    NASA Astrophysics Data System (ADS)

    Bae, Jaehan; Zhu, Zhaohuan

    2018-01-01

    Protoplanetary disk simulations show that a single planet excites multiple spiral arms in the background disk, potentially supported by the multi-armed spirals revealed with recent high-resolution observations in some disks. The existence of multiple spiral arms is of importance in many aspects. It is empirically found that the arm-to-arm separation increases as a function of the planetary mass, so one can use the morphology of observed spiral arms to infer the mass of unseen planets. In addition, a spiral arm opens a radial gap as it steepens into a shock, so when a planet excites multiple spiral arms it can open multiple gaps in the disk. Despite the important implications, however, the formation mechanism of multiple spiral arms has not been fully understood by far.In this talk, we explain how a planet excites multiple spiral arms. The gravitational potential of a planet can be decomposed into a Fourier series, a sum of individual azimuthal modes having different azimuthal wavenumbers. Using a linear wave theory, we first demonstrate that appropriate sets of Fourier decomposed waves can be in phase, raising a possibility that constructive interference among the waves can produce coherent structures - spiral arms. More than one spiral arm can form since such constructive interference can occur at different positions in the disk for different sets of waves. We then verify this hypothesis using a suite of two-dimensional hydrodynamic simulations. Finally, we present non-linear behavior in the formation of multiple spiral arms.

  20. Two odometers in honeybees?

    PubMed

    Dacke, M; Srinivasan, M V

    2008-10-01

    Although several studies have examined how honeybees gauge and report the distance and direction of a food source to their nestmates, relatively little is known about how this information is combined to obtain a representation of the position of the food source. In this study we manipulate the amount of celestial compass information available to the bee during flight, and analyse the encoding of spatial information in the waggle dance as well as in the navigation of the foraging bee. We find that the waggle dance encodes information about the total distance flown to the food source, even when celestial compass cues are available only for a part of the journey. This stands in contrast to how a bee gauges distance flown when it navigates back to a food source that it already knows. When bees were trained to find a feeder placed at a fixed distance in a tunnel in which celestial cues were partially occluded and then tested in a tunnel that was fully open to the sky, they searched for the feeder at a distance that corresponds closely to the distance that was flown under the open sky during the training. Thus, when navigating back to a food source, information about distance travelled is disregarded when there is no concurrent input from the celestial compass. We suggest that bees may possess two different odometers - a 'community' odometer that is used to provide information to nestmates via the dance, and a 'personal' odometer that is used by an experienced individual to return to a previously visited source.

  1. Environmental dew point and skin and lip weathering.

    PubMed

    Devillers, C; Piérard, G E; Quatresooz, P; Piérard, S

    2010-05-01

    Xerosis represents a physiological response of the stratum corneum (SC) to environmental threats. The influence of the environmental dew point (DP) is not fully understood. This parameter is the air temperature at which the relative humidity is maximum. This study aimed to assess the relationship between the environmental DP and the water-holding capacity of the skin and lower lip vermilion. For comparison, SC property was evaluated after occlusive application of cooled and uncooled hydrogel pads. Electrometric measurements using a dermal phase meter (DPM) device were performed on the back of the hands, the cheeks and the lower lip of 40 healthy menopausal women. Assessments were performed in the outdoor conditions during winter and spring. The same measurements were recorded after hydrogel pads, at room temperature or cooled to 4 degrees C, were placed for 15 min on the test sites. The environmental DP was recorded at each evaluation time. The SC water-holding capacity was discretely influenced by the DP. In the open-air environmental conditions, a positive linear relationship was found on the cheeks between the DP and DPM values. The relationship was weaker on the lips. Conversely, a consistent increase in DPM values was recorded immediately after removal of the cooled and uncooled hydrogel pads. The observations made in the open-air testing conditions are consistent with the predicted events following the Arrhenius law. By contrast, the combination of cooling and occlusion by the hydrogel pads is responsible for the reverse effect on the SC.

  2. Segregation analysis of Alzheimer pedigrees: Rare Mendelian dominant mutation(s) explain a minority of early-onset cases

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Martinez, M.; Campion, D.; Babron, M.C.

    1996-02-16

    Segregation analysis of Alzheimer disease (AD) in 92 families ascertained through early-onset ({le}age 60 years) AD (EOAD) probands has been carried out, allowing for a mixture in AD inheritance among probands. The goal was to quantify the proportion of probands that could be explained by autosomal inheritance of a rare disease allele {open_quotes}a{close_quotes} at a Mendelian dominant gene (MDG). Our data provide strong evidence for a mixture of two distributions; AD transmission is fully explained by MDG inheritance in <20% of probands. Male and female age-of-onset distributions are significantly different for {open_quotes}AA{close_quote} but not for {open_quotes}aA{close_quote} subjects. For {open_quotes}aA{close_quote} subjectsmore » the estimated penetrance value was close to 1 by age 60. For {open_quotes}AA{close_quotes} subjects, it reaches, by age 90, 10% (males) and 30% (females). We show a clear cutoff in the posterior probability of being an MDG case. 10 refs., 1 tab.« less

  3. Defense Science Board Task Force on The Future of the Global Positioning System

    DTIC Science & Technology

    2005-10-01

    interference. Incorporate a fully reprogrammable Navigation Payload aboard GPS satellites as soon as practicable to enable future flexibility in signal...its use increases in automobiles , it is becoming a significant factor in E-911-type situations, where emergency vehicles are dispatched to accident...mitigation for GPS against both intentional and unintentional interference. Incorporate a fully reprogrammable Navigation Payload aboard GPS

  4. Upflow bioreactor having a septum and an auger and drive assembly

    DOEpatents

    Hansen, Carl S.; Hansen, Conly L.

    2007-11-06

    An upflow bioreactor includes a vessel having an inlet and an outlet configured for upflow operation. A septum is positioned within the vessel and defines a lower chamber and an upper chamber. The septum includes an aperture that provides fluid communication between the upper chamber and lower chamber. The bioreactor also includes an auger positioned in the aperture of the septum. The vessel includes an opening in the top for receiving the auger. The auger extends from a drive housing, which is position over the opening and provides a seal around the opening. The drive housing is adjustable relative to the vessel. The position of the auger in the aperture can be adjusted by adjusting the drive housing relative to the vessel. The auger adjustment mechanism allows the auger to be accurately positioned within the aperture. The drive housing can also include a fluid to provide an additional seal around the shaft of the auger.

  5. Upflow bioreactor with septum and pressure release mechanism

    DOEpatents

    Hansen, Conly L.; Hansen, Carl S.; Pack, Kevin; Milligan, John; Benefiel, Bradley C.; Tolman, C. Wayne; Tolman, Kenneth W.

    2010-04-20

    An upflow bioreactor includes a vessel having an inlet and an outlet configured for upflow operation. A septum is positioned within the vessel and defines a lower chamber and an upper chamber. The septum includes an aperture that provides fluid communication between the upper chamber and lower chamber. The bioreactor also includes means for releasing pressure buildup in the lower chamber. In one configuration, the septum includes a releasable portion having an open position and a closed position. The releasable portion is configured to move to the open position in response to pressure buildup in the lower chamber. In the open position fluid communication between the lower chamber and the upper chamber is increased. Alternatively the lower chamber can include a pressure release line that is selectively actuated by pressure buildup. The pressure release mechanism can prevent the bioreactor from plugging and/or prevent catastrophic damage to the bioreactor caused by high pressures.

  6. 46 CFR 45.149 - Machinery space openings.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Machinery space openings. 45.149 Section 45.149 Shipping... Assignment § 45.149 Machinery space openings. (a) Machinery space openings in position 1 or 2 must be framed... funnel or machinery space ventilator that must be kept open for the essential operations of the ship must...

  7. 46 CFR 45.149 - Machinery space openings.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Machinery space openings. 45.149 Section 45.149 Shipping... Assignment § 45.149 Machinery space openings. (a) Machinery space openings in position 1 or 2 must be framed... funnel or machinery space ventilator that must be kept open for the essential operations of the ship must...

  8. 46 CFR 45.149 - Machinery space openings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery space openings. 45.149 Section 45.149 Shipping... Assignment § 45.149 Machinery space openings. (a) Machinery space openings in position 1 or 2 must be framed... funnel or machinery space ventilator that must be kept open for the essential operations of the ship must...

  9. 46 CFR 45.149 - Machinery space openings.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Machinery space openings. 45.149 Section 45.149 Shipping... Assignment § 45.149 Machinery space openings. (a) Machinery space openings in position 1 or 2 must be framed... funnel or machinery space ventilator that must be kept open for the essential operations of the ship must...

  10. 46 CFR 45.149 - Machinery space openings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Machinery space openings. 45.149 Section 45.149 Shipping... Assignment § 45.149 Machinery space openings. (a) Machinery space openings in position 1 or 2 must be framed... funnel or machinery space ventilator that must be kept open for the essential operations of the ship must...

  11. National Program for Inspection of Non-Federal Dams. Bearhole Reservoir (MA 00073), Westfield River Basin, West Springfield, Massachusetts. Phase I Inspection Report.

    DTIC Science & Technology

    1981-06-01

    SAutomatic . Manual I . Operative Yes I , No Co~ents: All controls operable per Water Departxent oersonnel. I Drawdown present Yes I , No Operative Yes_ , No... controls a 6-inch valve for dewatering the raw water wet well. One raw water supply gate was fully opened; the other opened 1-inch, and the 24-inch outlet...development). ,B- I B-2 w J---.-.z-- OtL ’S: OT7LET CONTROLS AND DRADMN Westerly end of dam - conc. overflow D.I. sluiceway No. Location and T7pe:I2

  12. Two Methods of Automatic Evaluation of Speech Signal Enhancement Recorded in the Open-Air MRI Environment

    NASA Astrophysics Data System (ADS)

    Přibil, Jiří; Přibilová, Anna; Frollo, Ivan

    2017-12-01

    The paper focuses on two methods of evaluation of successfulness of speech signal enhancement recorded in the open-air magnetic resonance imager during phonation for the 3D human vocal tract modeling. The first approach enables to obtain a comparison based on statistical analysis by ANOVA and hypothesis tests. The second method is based on classification by Gaussian mixture models (GMM). The performed experiments have confirmed that the proposed ANOVA and GMM classifiers for automatic evaluation of the speech quality are functional and produce fully comparable results with the standard evaluation based on the listening test method.

  13. High-torque open-end wrench

    NASA Technical Reports Server (NTRS)

    Giandomenico, A.; Dame, J. M.; Behimer, H. (Inventor)

    1978-01-01

    A wrench is described that is usable where limited access normally requires an open-end wrench, but which has substantially the high-torque capacity and small radial clearance characteristics of a closed-end wrench. The wrench includes a sleeve forming a nut-engageable socket with a gap in its side, and an adaptor forming a socket with a gap in its side, the adaptor closely surrounding the sleeve and extending across the gap in the sleeve. The sleeve and adaptor have surfaces that become fully engaged when a wrench handle is applied to the adaptor to turn it so as to tighten a nut engaged by the sleeve.

  14. Scattering by a boundary with complex structure.

    PubMed

    Naplekov, D M; Tur, A V; Yanovsky, V V

    2013-04-01

    The distribution of escape times is usually studied in open billiards theory. In this work, we will concentrate on another important question: The distribution of outgoing rays by exit directions, which we refer to as billiard's indicatrix. It can be obtained analytically and consists of two parts: the symmetric diffuse part and the asymmetric directed part. The criterion for the separation of the indicatrix into these two parts is established. The asymmetry of the directed part of the indicatrix and the influence of the billiard's borders on it is investigated. We also propose a method of the creation of a matte surface model using open billiards with a fully diffuse indicatrix.

  15. Development and Operation of the Microshutter Array System

    NASA Technical Reports Server (NTRS)

    Jhabvala, M. D.; Franz, D.; King, T.; Kletetschka, G.; Kutyrev, A. S.; Li, M. J.

    2008-01-01

    The microshutter array (MSA) is a key component in the James Webb Space Telescope Near Infrared Spectrometer (NIRSpec) instrument. The James Webb Space Telescope is the next generation of a space-borne astronomy platform that is scheduled to be launched in 2013. However, in order to effectively operate the array and meet the severe operational requirements associated with a space flight mission has placed enormous constraints on the microshutter array subsystem. This paper will present an overview and description of the entire microshutter subsystem including the microshutter array, the hybridized array assembly, the integrated CMOS electronics, mechanical mounting module and the test methodology and performance of the fully assembled microshutter subsystem. The NIRSpec is a European Space Agency (ESA) instrument requiring four fully assembled microshutter arrays, or quads, which are independently addressed to allow for the imaging of selected celestial objects onto the two 4 mega pixel IR detectors. Each microshutter array must have no more than approx.8 shutters which are failed in the open mode (depending on how many are failed closed) out of the 62,415 (365x171) total number of shutters per array. The driving science requirement is to be able to select up to 100 objects at a time to be spectrally imaged at the focal plane. The spectrum is dispersed in the direction of the 171 shutters so if there is an unwanted open shutter in that row the light from an object passing through that failed open shutter will corrupt the spectrum from the intended object.

  16. Promoting organ donation through an entertainment-education TV program in Korea: Open Your Eyes.

    PubMed

    Byoung Kwan Lee; Hyun Soon Park; Choi, Myung-Il; Cheon Soo Kim

    2010-01-01

    The purpose of this study is to investigate the effects of the characteristics of the program, Open Your Eyes, an entertainment-education TV program in Korea, on parasocial interaction and behavioral intention for organ donation. The results indicated that affective evaluation positively affected parasocial interaction with the program but cognitive evaluation negatively affected involvement with beneficiaries in the program. Also, it was found that cognitive evaluation of Open Your Eyes had a significant positive effect on behavioral intention. In addition, a significant positive effect of program engagement on the behavioral intention was found. Thus, the results indicate that individuals who feel program engagement of Open Your Eyes will be more likely to proceed with organ donation. However, no direct effect of involvement with the beneficiary and program hosts was found.

  17. Going fully digital: Perspective of a Dutch academic pathology lab

    PubMed Central

    Stathonikos, Nikolas; Veta, Mitko; Huisman, André; van Diest, Paul J.

    2013-01-01

    During the last years, whole slide imaging has become more affordable and widely accepted in pathology labs. Digital slides are increasingly being used for digital archiving of routinely produced clinical slides, remote consultation and tumor boards, and quantitative image analysis for research purposes and in education. However, the implementation of a fully digital Pathology Department requires an in depth look into the suitability of digital slides for routine clinical use (the image quality of the produced digital slides and the factors that affect it) and the required infrastructure to support such use (the storage requirements and integration with lab management and hospital information systems). Optimization of digital pathology workflow requires communication between several systems, which can be facilitated by the use of open standards for digital slide storage and scanner management. Consideration of these aspects along with appropriate validation of the use of digital slides for routine pathology can pave the way for pathology departments to go “fully digital.” In this paper, we summarize our experiences so far in the process of implementing a fully digital workflow at our Pathology Department and the steps that are needed to complete this process. PMID:23858390

  18. Soft Ultrathin Electronics Innervated Adaptive Fully Soft Robots.

    PubMed

    Wang, Chengjun; Sim, Kyoseung; Chen, Jin; Kim, Hojin; Rao, Zhoulyu; Li, Yuhang; Chen, Weiqiu; Song, Jizhou; Verduzco, Rafael; Yu, Cunjiang

    2018-03-01

    Soft robots outperform the conventional hard robots on significantly enhanced safety, adaptability, and complex motions. The development of fully soft robots, especially fully from smart soft materials to mimic soft animals, is still nascent. In addition, to date, existing soft robots cannot adapt themselves to the surrounding environment, i.e., sensing and adaptive motion or response, like animals. Here, compliant ultrathin sensing and actuating electronics innervated fully soft robots that can sense the environment and perform soft bodied crawling adaptively, mimicking an inchworm, are reported. The soft robots are constructed with actuators of open-mesh shaped ultrathin deformable heaters, sensors of single-crystal Si optoelectronic photodetectors, and thermally responsive artificial muscle of carbon-black-doped liquid-crystal elastomer (LCE-CB) nanocomposite. The results demonstrate that adaptive crawling locomotion can be realized through the conjugation of sensing and actuation, where the sensors sense the environment and actuators respond correspondingly to control the locomotion autonomously through regulating the deformation of LCE-CB bimorphs and the locomotion of the robots. The strategy of innervating soft sensing and actuating electronics with artificial muscles paves the way for the development of smart autonomous soft robots. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Glove box on vehicular instrument panel

    DOEpatents

    Atarashi, Kazuya

    1985-01-01

    A glove box for the upper surface of an automobile dashboard whereby it may be positioned close to the driver. The glove box lid is pivotally supported by arms extending down either side to swing forwardly for opening. A hook is pivotally support adjacent an arm and weighted to swing into engagement with the arm to prevent opening of the lid during abrupt deceleration. A toggle spring assists in maintaining the lid in either the open or closed position.

  20. 32 CFR 700.702 - Responsibility and authority of commanders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... subordinate commands are fully aware of the importance of strong, dynamic leadership and its relationship to the overall efficiency and readiness of naval forces. Commanders shall exercise positive leadership and actively develop the highest qualities of leadership in persons with positions of authority and...

  1. Spatial distribution of SPAD value and determination of the suitable leaf for N diagnosis in cucumber

    NASA Astrophysics Data System (ADS)

    Hu, Jing; Li, Chenxiao; Wen, Yifang; Gao, Xinhao; Shi, Feifei; Han, Luhua

    2018-01-01

    To determine the best leaf position for nitrogen diagnosis in cucumber with SPAD meter, greenhouse experiments were carried out to study spatial distribution of SPAD value of different position of the 3rd fully expanded cucumber leaf in the effect of different nitrogen levels, and the correlations between SPAD values and nitrogen concentration of chlorophyll. The results show that there is remarkable different SPAD value in different positions of the 3rd fully expanded leaf in the flowering and fruiting stage. Comparing the coefficients of SPAD value variation, we find that the coefficient of variation of leaf edge was significantly higher than the edge of the main vein, and the coefficient of variation of triangular area of leaf tip is significantly higher than any other leaf area. There is a significant correlation between SPAD values and leaf nitrogen content. Preliminary study shows that triangular area of leaf tip from the 20% leaf tip to leaf edge is the best position for nitrogen diagnosis.

  2. An open ecosystem engagement strategy through the lens of global food safety

    PubMed Central

    Stacey, Paul; Fons, Garin; Bernardo, Theresa M

    2015-01-01

    The Global Food Safety Partnership (GFSP) is a public/private partnership established through the World Bank to improve food safety systems through a globally coordinated and locally-driven approach. This concept paper aims to establish a framework to help GFSP fully leverage the potential of open models. In preparing this paper the authors spoke to many different GFSP stakeholders who asked questions about open models such as: what is it?what’s in it for me?why use an open rather than a proprietary model?how will open models generate equivalent or greater sustainable revenue streams compared to the current “traditional” approaches?  This last question came up many times with assertions that traditional service providers need to see opportunity for equivalent or greater revenue dollars before they will buy-in. This paper identifies open value propositions for GFSP stakeholders and proposes a framework for creating and structuring that value. Open Educational Resources (OER) were the primary open practice GFSP partners spoke to us about, as they provide a logical entry point for collaboration. Going forward, funders should consider requiring that educational resources and concomitant data resulting from their sponsorship should be open, as a public good. There are, however, many other forms of open practice that bring value to the GFSP. Nine different open strategies and tactics (Appendix A) are described, including: open content (including OER and open courseware), open data, open access (research), open government, open source software, open standards, open policy, open licensing and open hardware. It is recommended that all stakeholders proactively pursue "openness" as an operating principle. This paper presents an overall GFSP Open Ecosystem Engagement Strategy within which specific local case examples can be situated. Two different case examples, China and Colombia, are presented to show both project-based and crowd-sourced, direct-to-public paths through this ecosystem. PMID:26213614

  3. Estimation method of finger tapping dynamics using simple magnetic detection system

    NASA Astrophysics Data System (ADS)

    Kandori, Akihiko; Sano, Yuko; Miyashita, Tsuyoshi; Okada, Yoshihisa; Irokawa, Masataka; Shima, Keisuke; Tsuji, Toshio; Yokoe, Masaru; Sakoda, Saburo

    2010-05-01

    We have developed the simple estimation method of a finger tapping dynamics model for investigating muscle resistance and stiffness during tapping movement in normal subjects. We measured finger tapping movements of 207 normal subjects using a magnetic finger tapping detection system. Each subject tapped two fingers in time with a metronome at 1, 2, 3, 4, and 5 Hz. The velocity and acceleration values for both the closing and opening tapping data were used to estimate a finger tapping dynamics model. Using the frequency response of the ratio of acceleration to velocity of the mechanical impedance parameters, we estimated the resistance (friction coefficient) and compliance (stiffness). We found two dynamics models for the maximum open position and tap position. In the maximum open position, the extensor muscle resistance was twice as high as the flexor muscle resistance and males had a higher spring constant. In the tap position, the flexor muscle resistance was much higher than the extensor muscle resistance. This indicates that the tapping dynamics in the maximum open position are controlled by the balance of extensor and flexor muscle friction resistances and the flexor stiffness, and the flexor friction resistance is the main component in the tap position. It can be concluded that our estimation method makes it possible to understand the tapping dynamics.

  4. Estimation method of finger tapping dynamics using simple magnetic detection system.

    PubMed

    Kandori, Akihiko; Sano, Yuko; Miyashita, Tsuyoshi; Okada, Yoshihisa; Irokawa, Masataka; Shima, Keisuke; Tsuji, Toshio; Yokoe, Masaru; Sakoda, Saburo

    2010-05-01

    We have developed the simple estimation method of a finger tapping dynamics model for investigating muscle resistance and stiffness during tapping movement in normal subjects. We measured finger tapping movements of 207 normal subjects using a magnetic finger tapping detection system. Each subject tapped two fingers in time with a metronome at 1, 2, 3, 4, and 5 Hz. The velocity and acceleration values for both the closing and opening tapping data were used to estimate a finger tapping dynamics model. Using the frequency response of the ratio of acceleration to velocity of the mechanical impedance parameters, we estimated the resistance (friction coefficient) and compliance (stiffness). We found two dynamics models for the maximum open position and tap position. In the maximum open position, the extensor muscle resistance was twice as high as the flexor muscle resistance and males had a higher spring constant. In the tap position, the flexor muscle resistance was much higher than the extensor muscle resistance. This indicates that the tapping dynamics in the maximum open position are controlled by the balance of extensor and flexor muscle friction resistances and the flexor stiffness, and the flexor friction resistance is the main component in the tap position. It can be concluded that our estimation method makes it possible to understand the tapping dynamics.

  5. Changes of oral sensibility in subjects with partial anterior open bite and the incorrect position of the tongue.

    PubMed

    Koczorowski, Maciej; Gedrange, Tomasz; Koczorowski, Ryszard

    2012-03-20

    Neuromuscular disorders lead to an imbalance in the position of the jaw. The aim of this study has been to analyse gnostic sensibility in subjects with partial anterior open bite and the incorrect position of the tongue. The study involved 20 subjects with partial anterior open bite and an incorrect tongue position. The control group consisted of 20 individuals with correct occlusion and tongue position. The basic study method was a stereognostic examination using 4 silicon shapes - a square, triangle, circle and semicircle. The accuracy of shape identification and the time that the subjects needed to identify the shapes were analysed before and after the tip of the tongue was anaesthetized. Results showed that correct identification of the shapes was 7.4% worse in the study group than in the control group and that the difference was greatest when the tip of the tongue was anaesthetized - 28.8%. The time needed to identify the shapes was shorter in the study group than in the control group. The results indicate that people with partial anterior open bite and incorrect tongue position exhibit impaired gnostic sensibility, especially at the tip of the tongue. Impaired gnostic sensibility, which is a symptom of the disturbed sensomotoric correlation of the tongue, leads to the tongue's incorrect position in the process of swallowing and speaking. Copyright © 2011 Elsevier GmbH. All rights reserved.

  6. Computational Analysis of a Wells Turbine with Flexible Trailing Edges

    NASA Astrophysics Data System (ADS)

    Kincaid, Kellis; Macphee, David

    2017-11-01

    The Wells turbine is often used to produce a net positive power from an oscillating air column excited by ocean waves. It has been parametrically studied quite thoroughly in the past, both experimentally and numerically. The effects of various characteristics such as blade count and profile, solidity, and tip gap are well known. Several three-dimensional computational studies have been carried out using commercial code to investigate many phenomena detected in experiments: hysteresis, tip-gap drag, and post-stall behavior for example. In this work, the open-source code Foam-Extend is used to examine the effect of flexible blades on the performance of the Wells turbine. A new solver is created to integrate fluid-structure interaction into the code, allowing an accurate solution for both the solid and fluid domains. Reynolds-averaged governing equations are employed in a fully transient solution model. The elastic modulus of the flexible portion of the blade and the tip-gap width are varied, and the resulting flow fields are investigated to determine the cause of any performance differences. NSF Grant EEC 1659710.

  7. The interplay between biological and physical scenarios of bacterial death induced by non-thermal plasma.

    PubMed

    Lunov, Oleg; Zablotskii, Vitalii; Churpita, Olexander; Jäger, Ales; Polívka, Leoš; Syková, Eva; Dejneka, Alexandr; Kubinová, Šárka

    2016-03-01

    Direct interactions of plasma matter with living cells and tissues can dramatically affect their functionality, initiating many important effects from cancer elimination to bacteria deactivation. However, the physical mechanisms and biochemical pathways underlying the effects of non-thermal plasma on bacteria and cell fate have still not been fully explored. Here, we report on the molecular mechanisms of non-thermal plasma-induced bacteria inactivation in both Gram-positive and Gram-negative strains. We demonstrate that depending on the exposure time plasma induces either direct physical destruction of bacteria or triggers programmed cell death (PCD) that exhibits characteristic features of apoptosis. The interplay between physical disruption and PCD is on the one hand driven by physical plasma parameters, and on the other hand by biological and physical properties of bacteria. The explored possibilities of the tuneable bacteria deactivation provide a basis for the development of advanced plasma-based therapies. To a great extent, our study opens new possibilities for controlled non-thermal plasma interactions with living systems. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. From trace evidence to bioinformatics: putting bryophytes into molecular biology education.

    PubMed

    Fuselier, Linda; Bougary, Azhar; Malott, Michelle

    2011-01-01

    Students benefit most from their science education when they participate fully in the process of science in the context of real-world problems. We describe a student-directed open-inquiry lab experience that has no predetermined outcomes and requires students to engage in all components of scientific inquiry from posing a question through evaluating and reporting results. Over 5 weeks, students learn how bryophytes are used in forensics and become proficient in important molecular biology lab skills including DNA isolation, polymerase chain reaction, gel electrophoresis, capillary electrophoresis, and genotyping. For this portion of the experience, there is no specialized equipment necessary outside of gel electrophoresis supplies and a thermocycler. In an optional extension of the experience, students sequence a plastid intron and use introductory bioinformatics skills to identify species related to their forensics case. Students who participated in the lab experience performed well on content-based assessment, and student attitudes toward the experience were positive and indicative of engaged learning. The lab experience is easily modified for higher or lower level courses and can be used in secondary education. Copyright © 2011 Wiley Periodicals, Inc.

  9. Multi-channel dynamics in high harmonic generation of aligned CO2: ab initio analysis with time-dependent B-spline algebraic diagrammatic construction.

    PubMed

    Ruberti, M; Decleva, P; Averbukh, V

    2018-03-28

    Here we present a fully ab initio study of the high-order harmonic generation (HHG) spectrum of aligned CO 2 molecules. The calculations have been performed by using the molecular time-dependent (TD) B-spline algebraic diagrammatic construction (ADC) method. We quantitatively study how the sub-cycle laser-driven multi-channel dynamics, as reflected in the position of the dynamical minimum in the HHG spectrum, is affected by the full inclusion of both correlation-driven and laser-driven dipole interchannel couplings. We calculate channel-resolved spectral intensities as well as the phase differences between contributions of the different ionization-recombination channels to the total HHG spectrum. Our results show that electron correlation effectively controls the relative contributions of the different channels to the total HHG spectrum, leading to the opening of the new ones (1 2 Π u , 1 2 Σ), previously disregarded for the aligned molecular setup. We conclude that inclusion of many-electron effects into the theoretical interpretation of molecular HHG spectra is essential in order to correctly extract ultrafast electron dynamics using HHG spectroscopy.

  10. Employing open/hidden administration in psychotherapy research: A randomized-controlled trial of expressive writing

    PubMed Central

    Tondorf, Theresa; Kaufmann, Lisa-Katrin; Degel, Alexander; Locher, Cosima; Birkhäuer, Johanna; Gerger, Heike; Ehlert, Ulrike

    2017-01-01

    Psychotherapy has been shown to be effective, but efforts to prove specific effects by placebo-controlled trials have been practically and conceptually hampered. We propose that adopting open/hidden designs from placebo research would offer a possible way to establish specificity in psychotherapy. Therefore, we tested the effects of providing opposing treatment rationales in an online expressive writing intervention on affect in healthy subjects. Results indicate that it was possible to conduct the expressive writing intervention both covertly and openly, but that participants in the hidden administration condition did not fully benefit from the otherwise effective expressive writing intervention in the long-run. Effect sizes between open and hidden administration groups were comparable to pre-post effect sizes of the intervention. While this finding is important for the understanding of psychotherapy's effects per se, it also proves that alternative research approaches to establish specificity are feasible and informative in psychotherapy research. Trial registration: German Clinical Trials Register DRKS00009428 PMID:29176768

  11. Open ISEmeter: An open hardware high-impedance interface for potentiometric detection

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Salvador, C.; Carbajo, J.; Mozo, J. D., E-mail: jdaniel.mozo@diq.uhu.es

    In this work, a new open hardware interface based on Arduino to read electromotive force (emf) from potentiometric detectors is presented. The interface has been fully designed with the open code philosophy and all documentation will be accessible on web. The paper describes a comprehensive project including the electronic design, the firmware loaded on Arduino, and the Java-coded graphical user interface to load data in a computer (PC or Mac) for processing. The prototype was tested by measuring the calibration curve of a detector. As detection element, an active poly(vinyl chloride)-based membrane was used, doped with cetyltrimethylammonium dodecylsulphate (CTA{sup +}-DS{supmore » −}). The experimental measures of emf indicate Nernstian behaviour with the CTA{sup +} content of test solutions, as it was described in the literature, proving the validity of the developed prototype. A comparative analysis of performance was made by using the same chemical detector but changing the measurement instrumentation.« less

  12. Designing non-Hermitian dynamics for conservative state evolution on the Bloch sphere

    NASA Astrophysics Data System (ADS)

    Yu, Sunkyu; Piao, Xianji; Park, Namkyoo

    2018-03-01

    An evolution on the Bloch sphere is the fundamental state transition, including optical polarization controls and qubit operations. Conventional evolution of a polarization state or qubit is implemented within a closed system that automatically satisfies energy conservation from the Hermitian formalism. Although particular forms of static non-Hermitian Hamiltonians, such as parity-time-symmetric Hamiltonians, allow conservative states in an open system, the criteria for the energy conservation in a dynamical open system have not been fully explored. Here, we derive the condition of conservative state evolution in open-system dynamics and its inverse design method, by developing the non-Hermitian modification of the Larmor precession equation. We show that the geometrically designed locus on the Bloch sphere can be realized by different forms of dynamics, leading to the isolocus family of non-Hermitian dynamics. This increased degree of freedom allows the complementary phenomena of error-robust and highly sensitive evolutions on the Bloch sphere, which could be applicable to stable polarizers, quantum gates, and optimized sensors in dynamical open systems.

  13. Fluorescence detection of the movement of single KcsA subunits reveals cooperativity

    PubMed Central

    Blunck, Rikard; McGuire, Hugo; Hyde, H. Clark; Bezanilla, Francisco

    2008-01-01

    The prokaryotic KcsA channel is gated at the helical bundle crossing by intracellular protons and inactivates at the extracellular selectivity filter. The C-terminal transmembrane helix has to undergo a conformational change for potassium ions to access the central cavity. Whereas a partial opening of the tetrameric channel is suggested to be responsible for subconductance levels of ion channels, including KcsA, a cooperative opening of the 4 subunits is postulated as the final opening step. In this study, we used single-channel fluorescence spectroscopy of KcsA to directly observe the movement of each subunit and the temporal correlation between subunits. Purified KcsA channels labeled at the C terminus near the bundle crossing have been inserted into supported lipid bilayer, and the fluorescence traces analyzed by means of a cooperative or independent Markov model. The analysis revealed that the 4 subunits do not move fully independently but instead showed a certain degree of cooperativity. However, the 4 subunits do not simply open in 1 concerted step. PMID:19074286

  14. Honest, Open, Proud for adolescents with mental illness: pilot randomized controlled trial.

    PubMed

    Mulfinger, Nadine; Müller, Sabine; Böge, Isabel; Sakar, Vehbi; Corrigan, Patrick W; Evans-Lacko, Sara; Nehf, Luise; Djamali, Julia; Samarelli, Anna; Kempter, Michael; Ruckes, Christian; Libal, Gerhard; Oexle, Nathalie; Noterdaeme, Michele; Rüsch, Nicolas

    2018-06-01

    Due to public stigma or self-stigma and shame, many adolescents with mental illness (MI) struggle with the decision whether to disclose their MI to others. Both disclosure and nondisclosure are associated with risks and benefits. Honest, Open, Proud (HOP) is a peer-led group program that supports participants with disclosure decisions in order to reduce stigma's impact. Previously, HOP had only been evaluated among adults with MI. This two-arm pilot randomized controlled trial included 98 adolescents with MI. Participants were randomly assigned to HOP and treatment as usual (TAU) or to TAU alone. Outcomes were assessed pre (T0/baseline), post (T1/after the HOP program), and at 3-week follow-up (T2/6 weeks after T0). Primary endpoints were stigma stress at T1 and quality of life at T2. Secondary outcomes included self-stigma, disclosure-related distress, empowerment, help-seeking intentions, recovery, and depressive symptoms. The trial is registered on ClinicalTrials (NCT02751229; http://www.clinicaltrials.gov). Compared to TAU, adolescents in the HOP program showed significantly reduced stigma stress at T1 (d = .92, p < .001) and increased quality of life at T2 (d = .60, p = .004). In a longitudinal mediation model, the latter effect was fully mediated by stigma stress reduction at T1. HOP further showed significant positive effects on self-stigma, disclosure-related distress, secrecy, help-seeking intentions, attitudes to disclosure, recovery, and depressive symptoms. Effects at T1 remained stable or improved further at follow-up. In a limited economic evaluation HOP was cost-efficient in relation to gains in quality of life. As HOP is a compact three-session program and showed positive effects on stigma and disclosure variables as well as on symptoms and quality of life, it could help to reduce stigma's negative impact among adolescents with MI. © 2017 Association for Child and Adolescent Mental Health.

  15. SSL: Signal Similarity-Based Localization for Ocean Sensor Networks.

    PubMed

    Chen, Pengpeng; Ma, Honglu; Gao, Shouwan; Huang, Yan

    2015-11-24

    Nowadays, wireless sensor networks are often deployed on the sea surface for ocean scientific monitoring. One of the important challenges is to localize the nodes' positions. Existing localization schemes can be roughly divided into two types: range-based and range-free. The range-based localization approaches heavily depend on extra hardware capabilities, while range-free ones often suffer from poor accuracy and low scalability, far from the practical ocean monitoring applications. In response to the above limitations, this paper proposes a novel signal similarity-based localization (SSL) technology, which localizes the nodes' positions by fully utilizing the similarity of received signal strength and the open-air characteristics of the sea surface. In the localization process, we first estimate the relative distance between neighboring nodes through comparing the similarity of received signal strength and then calculate the relative distance for non-neighboring nodes with the shortest path algorithm. After that, the nodes' relative relation map of the whole network can be obtained. Given at least three anchors, the physical locations of nodes can be finally determined based on the multi-dimensional scaling (MDS) technology. The design is evaluated by two types of ocean experiments: a zonal network and a non-regular network using 28 nodes. Results show that the proposed design improves the localization accuracy compared to typical connectivity-based approaches and also confirm its effectiveness for large-scale ocean sensor networks.

  16. Relationship between Telomere Length, Genetic Traits and Environmental/Occupational Exposures in Bladder Cancer Risk by Structural Equation Modelling.

    PubMed

    Pavanello, Sofia; Carta, Angela; Mastrangelo, Giuseppe; Campisi, Manuela; Arici, Cecilia; Porru, Stefano

    2017-12-21

    Background : Telomere length (TL) maintenance plays an important role in bladder cancer (BC) and prognosis. However the manifold influence of everyday life exposures and genetic traits on leucocyte TL (LTL), is not fully elucidated. Methods : Within the framework of a hospital-based case ( n = 96)/control ( n = 94) study (all Caucasian males), we investigated the extent to which LTL and BC risk were modulated by genetic polymorphisms and environmental and occupational exposures. Data on lifetime smoking, alcohol and coffee drinking, dietary habits and occupational exposures, pointing to aromatic amines (AAs) and polycyclic aromatic hydrocarbons (PAHs) were collected. Structural equation modelling (SEM) analysis appraised this complex relationships. Results : The SEM analysis indicates negative direct links ( p < 0.05) between LTL with age, DNA adducts, alcohol and NAT2, and positive ones with coffee, MPO and XRCC3; and between BC risk ( p < 0.01) with cigarettes, cumulative exposure to AAs and coffee, while are negative with LTL and age. There was evidence of indirect effects ( p < 0.05) on BC risk, probably via LTL reduction, by age and NAT2 (positive link), MPO and XRCC3 (negative link). Our study supports evidence that LTL attrition is a critical event in BC. The new finding that LTL erosion depends on some preventable everyday life exposures genetically modulated, opens new perspectives in BC prevention.

  17. Relationship between Telomere Length, Genetic Traits and Environmental/Occupational Exposures in Bladder Cancer Risk by Structural Equation Modelling

    PubMed Central

    Pavanello, Sofia; Carta, Angela; Mastrangelo, Giuseppe; Campisi, Manuela; Porru, Stefano

    2017-01-01

    Background: Telomere length (TL) maintenance plays an important role in bladder cancer (BC) and prognosis. However the manifold influence of everyday life exposures and genetic traits on leucocyte TL (LTL), is not fully elucidated. Methods: Within the framework of a hospital-based case (n = 96)/control (n = 94) study (all Caucasian males), we investigated the extent to which LTL and BC risk were modulated by genetic polymorphisms and environmental and occupational exposures. Data on lifetime smoking, alcohol and coffee drinking, dietary habits and occupational exposures, pointing to aromatic amines (AAs) and polycyclic aromatic hydrocarbons (PAHs) were collected. Structural equation modelling (SEM) analysis appraised this complex relationships. Results: The SEM analysis indicates negative direct links (p < 0.05) between LTL with age, DNA adducts, alcohol and NAT2, and positive ones with coffee, MPO and XRCC3; and between BC risk (p < 0.01) with cigarettes, cumulative exposure to AAs and coffee, while are negative with LTL and age. There was evidence of indirect effects (p < 0.05) on BC risk, probably via LTL reduction, by age and NAT2 (positive link), MPO and XRCC3 (negative link). Conclusions: Our study supports evidence that LTL attrition is a critical event in BC. The new finding that LTL erosion depends on some preventable everyday life exposures genetically modulated, opens new perspectives in BC prevention. PMID:29267235

  18. Accurate prediction of X-ray pulse properties from a free-electron laser using machine learning

    DOE PAGES

    Sanchez-Gonzalez, A.; Micaelli, P.; Olivier, C.; ...

    2017-06-05

    Free-electron lasers providing ultra-short high-brightness pulses of X-ray radiation have great potential for a wide impact on science, and are a critical element for unravelling the structural dynamics of matter. To fully harness this potential, we must accurately know the X-ray properties: intensity, spectrum and temporal profile. Owing to the inherent fluctuations in free-electron lasers, this mandates a full characterization of the properties for each and every pulse. While diagnostics of these properties exist, they are often invasive and many cannot operate at a high-repetition rate. Here, we present a technique for circumventing this limitation. Employing a machine learning strategy,more » we can accurately predict X-ray properties for every shot using only parameters that are easily recorded at high-repetition rate, by training a model on a small set of fully diagnosed pulses. Lastly, this opens the door to fully realizing the promise of next-generation high-repetition rate X-ray lasers.« less

  19. Accurate prediction of X-ray pulse properties from a free-electron laser using machine learning

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sanchez-Gonzalez, A.; Micaelli, P.; Olivier, C.

    Free-electron lasers providing ultra-short high-brightness pulses of X-ray radiation have great potential for a wide impact on science, and are a critical element for unravelling the structural dynamics of matter. To fully harness this potential, we must accurately know the X-ray properties: intensity, spectrum and temporal profile. Owing to the inherent fluctuations in free-electron lasers, this mandates a full characterization of the properties for each and every pulse. While diagnostics of these properties exist, they are often invasive and many cannot operate at a high-repetition rate. Here, we present a technique for circumventing this limitation. Employing a machine learning strategy,more » we can accurately predict X-ray properties for every shot using only parameters that are easily recorded at high-repetition rate, by training a model on a small set of fully diagnosed pulses. Lastly, this opens the door to fully realizing the promise of next-generation high-repetition rate X-ray lasers.« less

  20. Conformational Heterogeneity in a Fully Complementary DNA Three-Way Junction with a GC-Rich Branchpoint.

    PubMed

    Toulmin, Anita; Baltierra-Jasso, Laura E; Morten, Michael J; Sabir, Tara; McGlynn, Peter; Schröder, Gunnar F; Smith, Brian O; Magennis, Steven W

    2017-09-19

    DNA three-way junctions (3WJs) are branched structures that serve as important biological intermediates and as components in DNA nanostructures. We recently derived the global structure of a fully complementary 3WJ and found that it contained unpaired bases at the branchpoint, which is consistent with previous observations of branch flexibility and branchpoint reactivity. By combining high-resolution single-molecule Förster resonance energy transfer, molecular modeling, time-resolved ensemble fluorescence spectroscopy, and the first 19 F nuclear magnetic resonance observations of fully complementary 3WJs, we now show that the 3WJ structure can adopt multiple distinct conformations depending upon the sequence at the branchpoint. A 3WJ with a GC-rich branchpoint adopts an open conformation with unpaired bases at the branch and at least one additional conformation with an increased number of base interactions at the branchpoint. This structural diversity has implications for branch interactions and processing in vivo and for technological applications.

  1. Small firm self-insurance under the Affordable Care Act.

    PubMed

    Buettgens, Matthew; Blumberg, Linda J

    2012-11-01

    The Affordable Care Act changes the small-group insurance market substan­tially beginning in 2014, but most changes do not apply to self-insured plans. This exemp­tion provides an opening for small employers with healthier workers to avoid broader sharing of health care risk, isolating higher-cost groups in the fully insured market. Private stop-loss or reinsurance plans can mediate the risk of self-insurance for small employ­ers, facilitating the decision to self-insure. We simulate small-employer coverage decisions under the law and find that low-risk stop-loss policies lead to higher premiums in the fully insured small-group market. Average single premiums would be up to 25 percent higher, if stop-loss insurance with no additional risk to employers than fully insuring is allowed--an option available in most states absent further government action. Regulation of stop-loss at the federal or state level can, however, prevent such adverse selection and increase stabil­ity in small-group insurance coverage.

  2. 45 sign switching of effective exchange bias due to competing anisotropies in fully epitaxial Co3FeN/MnN bilayers.

    PubMed

    Hajiri, Tetsuya; Yoshida, Takuya; Filianina, Mariia; Jaiswal, Samridh; Borie, Benjamin; Asano, H; Zabel, Hartmut; Klaui, Mathias

    2017-11-20

    We report an unusual angular-dependent exchange bias effect in ferromagnet/antiferromagnet bilayers, where both ferromagnet and antiferromagnet are epitaxially grown. Numerical model calculations predict an approximately 45$^\\circ$ period for the sign switching of the exchange-bias field, depending on the ratio between magnetocrystalline anisotropy and exchange-coupling constant. The switching of the sign is indicative of a competition between a fourfold magnetocrystalline anisotropy of the ferromagnet and a unidirectional anisotropy field of the exchange coupling. This predicted unusual angular-dependent exchange bias and its magnetization switching process are confirmed by measurements on fully epitaxial Co$_3$FeN/MnN bilayers by longitudinal and transverse magneto-optic Kerr effect magnetometry. These results provide a deeper understanding of the exchange coupling phenomena in fully epitaxial bilayers with tailored materials and open up a complex switching energy landscape engineering by anisotropies. © 2017 IOP Publishing Ltd.

  3. Probabilistic Open Set Recognition

    NASA Astrophysics Data System (ADS)

    Jain, Lalit Prithviraj

    Real-world tasks in computer vision, pattern recognition and machine learning often touch upon the open set recognition problem: multi-class recognition with incomplete knowledge of the world and many unknown inputs. An obvious way to approach such problems is to develop a recognition system that thresholds probabilities to reject unknown classes. Traditional rejection techniques are not about the unknown; they are about the uncertain boundary and rejection around that boundary. Thus traditional techniques only represent the "known unknowns". However, a proper open set recognition algorithm is needed to reduce the risk from the "unknown unknowns". This dissertation examines this concept and finds existing probabilistic multi-class recognition approaches are ineffective for true open set recognition. We hypothesize the cause is due to weak adhoc assumptions combined with closed-world assumptions made by existing calibration techniques. Intuitively, if we could accurately model just the positive data for any known class without overfitting, we could reject the large set of unknown classes even under this assumption of incomplete class knowledge. For this, we formulate the problem as one of modeling positive training data by invoking statistical extreme value theory (EVT) near the decision boundary of positive data with respect to negative data. We provide a new algorithm called the PI-SVM for estimating the unnormalized posterior probability of class inclusion. This dissertation also introduces a new open set recognition model called Compact Abating Probability (CAP), where the probability of class membership decreases in value (abates) as points move from known data toward open space. We show that CAP models improve open set recognition for multiple algorithms. Leveraging the CAP formulation, we go on to describe the novel Weibull-calibrated SVM (W-SVM) algorithm, which combines the useful properties of statistical EVT for score calibration with one-class and binary support vector machines. Building from the success of statistical EVT based recognition methods such as PI-SVM and W-SVM on the open set problem, we present a new general supervised learning algorithm for multi-class classification and multi-class open set recognition called the Extreme Value Local Basis (EVLB). The design of this algorithm is motivated by the observation that extrema from known negative class distributions are the closest negative points to any positive sample during training, and thus should be used to define the parameters of a probabilistic decision model. In the EVLB, the kernel distribution for each positive training sample is estimated via an EVT distribution fit over the distances to the separating hyperplane between positive training sample and closest negative samples, with a subset of the overall positive training data retained to form a probabilistic decision boundary. Using this subset as a frame of reference, the probability of a sample at test time decreases as it moves away from the positive class. Possessing this property, the EVLB is well-suited to open set recognition problems where samples from unknown or novel classes are encountered at test. Our experimental evaluation shows that the EVLB provides a substantial improvement in scalability compared to standard radial basis function kernel machines, as well as P I-SVM and W-SVM, with improved accuracy in many cases. We evaluate our algorithm on open set variations of the standard visual learning benchmarks, as well as with an open subset of classes from Caltech 256 and ImageNet. Our experiments show that PI-SVM, WSVM and EVLB provide significant advances over the previous state-of-the-art solutions for the same tasks.

  4. Music to Our Eyes: Google Books, Google Scholar, and the Open Content Alliance

    ERIC Educational Resources Information Center

    Dougan, Kirstin

    2010-01-01

    The Internet has changed how scholars perform their research. With more and more content available online that is fully searchable (often even for free), it is not surprising that students and others may turn there first before coming to the library. This study aims to identify the utility of three of the largest free access points to print…

  5. Promoting Honesty and Truthfulness When Things Go Wrong During Care Delivery for Sick Children.

    PubMed

    Glasper, Edward Alan

    2018-06-01

    Emeritus Professor and Editor-in-Chief Edward Alan Glasper discusses why children's nurses must fully adopt the duty of candour in care delivery, which in some countries is a legal obligation, to ensure that consumers of healthcare and their families are apologized to, and communicated with, openly and honestly when things have gone wrong in their care.

  6. A Real-Time Linux for Multicore Platforms

    DTIC Science & Technology

    2013-12-20

    under ARO support) to obtain a fully-functional OS for supporting real-time workloads on multicore platforms. This system, called LITMUS -RT...to be specified as plugin components. LITMUS -RT is open-source software (available at The views, opinions and/or findings contained in this report... LITMUS -RT (LInux Testbed for MUltiprocessor Scheduling in Real-Time systems), allows different multiprocessor real-time scheduling and

  7. Infrared-enhanced TV for fire detection

    NASA Technical Reports Server (NTRS)

    Hall, J. R.

    1978-01-01

    Closed-circuit television is superior to conventional smoke or heat sensors for detecting fires in large open spaces. Single TV camera scans entire area, whereas many conventional sensors and maze of interconnecting wiring might be required to get same coverage. Camera is monitored by person who would trip alarm if fire were detected, or electronic circuitry could process camera signal for fully-automatic alarm system.

  8. Handbook for Students, Teachers and Parents. BOCES/SCOPE Outdoor Learning Laboratory at Sunken Meadow.

    ERIC Educational Resources Information Center

    Long Island State Park and Recreation Commission, NY.

    Since 1971 a fully equipped learning laboratory building and the open fields, woodlands, salt water marshes, and beaches of Sunken Meadow State Park have been available for year round day use by students and educators in New York's Suffolk and Nassau counties. Funded by the New York Office of Parks and Recreation and local Boards of Cooperative…

  9. 75 FR 4893 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-29

    ... to be amended by deleting references to the old trading system, Phlx XL. The Exchange also proposes... pertaining to the opening by deleting outdated language. In July 2009, the Exchange fully rolled out its new options trading system, Phlx XL II.\\4\\ Accordingly, many portions of Rule 1017, which pertained to the old...

  10. Effects of a Self-Instruction Communication Skills Training on Skills, Self-Efficacy, Motivation, and Transfer

    ERIC Educational Resources Information Center

    Hommes, Mark A.; Van der Molen, Henk T.

    2012-01-01

    This article describes a study on the effects of a self-instruction training programme in communication skills for psychology students at the Open University of the Netherlands in comparison to a fully supervised training. We expected both training programmes to increase students' knowledge and skills, as well as their self-efficacy and motivation…

  11. Is the Educational Technology Revolution Losing Steam? What Academic Leaders Can Do to Keep Us Moving Forward

    ERIC Educational Resources Information Center

    Miller, Michelle D.

    2017-01-01

    Educational technology has fueled a revolution in higher education. Technology-based models such as blended learning, fully online courses, online degree programs, and MOOCs (massive open online courses) are redefining what teaching looks like. They also greatly expand who gets to learn and where and when that learning can take place. The ed tech…

  12. Seeing Children Fully Immersed in Sensory Exploration

    ERIC Educational Resources Information Center

    Guiney, Jess; Wilton, Sheena; Curtis, Deb

    2012-01-01

    Jessica and Isabella were immediately drawn to the new chalk available on the patio. As soon as they saw the big basket, they found an open space and began testing the colors. The authors recently brought this story to their planning time with Deb, to share the photos and notes they had collected of Jessica and Isabella working with the chalk.…

  13. 77 FR 59673 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-28

    ... will examine valves and nozzles for damage malfunction and close the door fully before opening the air... failure pressure of 1,300 pounds per square inch, capped at the base, and actuated by an electrically controlled ball valve at the top. 6. Air nozzles must not exceed 30 pounds per square inch gauge. 7. The...

  14. 33 CFR 118.80 - Lights on bascule bridges.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Lights on bascule bridges. 118.80... LIGHTING AND OTHER SIGNALS § 118.80 Lights on bascule bridges. (a) Lift span lights. Each lift span of... green light which shows only when the span is fully open for the passage of a vessel and by a red light...

  15. 33 CFR 118.80 - Lights on bascule bridges.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Lights on bascule bridges. 118.80... LIGHTING AND OTHER SIGNALS § 118.80 Lights on bascule bridges. (a) Lift span lights. Each lift span of... green light which shows only when the span is fully open for the passage of a vessel and by a red light...

  16. 33 CFR 118.80 - Lights on bascule bridges.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Lights on bascule bridges. 118.80... LIGHTING AND OTHER SIGNALS § 118.80 Lights on bascule bridges. (a) Lift span lights. Each lift span of... green light which shows only when the span is fully open for the passage of a vessel and by a red light...

  17. Mastery Without Mystery: Why there is no Promethean Sin in Enhancement

    PubMed Central

    Kahane, Guy

    2011-01-01

    Several authors have suggested that we cannot fully grapple with the ethics of human enhancement unless we address neglected questions about our place in the world, questions that verge on theology but can be pursued independently of religion. A prominent example is Michael Sandel, who argues that the deepest objection to enhancement is that it expresses a Promethean drive to mastery which deprives us of openness to the unbidden and leaves us with nothing to affirm outside our own wills. Sandel's argument against enhancement has been criticized, but his claims about mastery and the unbidden, and their relation to religion, have not yet received sufficient attention. I argue that Sandel misunderstands the notions of mastery and the unbidden and their significance. Once these notions are properly understood, they have surprising implications. It turns out that the value of openness to the unbidden is not just independent of theism, as Sandel claims, but is in fact not even fully compatible with it. But in any case that value cannot support Sandel's objection to enhancement. This is because it is not enhancement but certain forms of opposition to enhancement that are most likely to express a pernicious drive to mastery. PMID:22318775

  18. KENNEDY SPACE CENTER, FLA. - Seen in the photo is one end of the airlock that is installed in the payload bay of orbiter Discovery. The airlock is normally located inside the middeck of the spacecraft’s pressurized crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. Support functions include airlock depressurization and repressurization, extravehicular activity equipment recharge, liquid-cooled garment water cooling, EVA equipment checkout, donning and communications. The outer hatch isolates the airlock from the unpressurized payload bay when closed and permits the EVA crew members to exit from the airlock to the payload bay when open.

    NASA Image and Video Library

    2004-01-22

    KENNEDY SPACE CENTER, FLA. - Seen in the photo is one end of the airlock that is installed in the payload bay of orbiter Discovery. The airlock is normally located inside the middeck of the spacecraft’s pressurized crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. Support functions include airlock depressurization and repressurization, extravehicular activity equipment recharge, liquid-cooled garment water cooling, EVA equipment checkout, donning and communications. The outer hatch isolates the airlock from the unpressurized payload bay when closed and permits the EVA crew members to exit from the airlock to the payload bay when open.

  19. Is the catalytic activity of triosephosphate isomerase fully optimized? An investigation based on maximization of entropy production.

    PubMed

    Bonačić Lošić, Željana; Donđivić, Tomislav; Juretić, Davor

    2017-03-01

    Triosephosphate isomerase (TIM) is often described as a fully evolved housekeeping enzyme with near-maximal possible reaction rate. The assumption that an enzyme is perfectly evolved has not been easy to confirm or refute. In this paper, we use maximization of entropy production within known constraints to examine this assumption by calculating steady-state cyclic flux, corresponding entropy production, and catalytic activity in a reversible four-state scheme of TIM functional states. The maximal entropy production (MaxEP) requirement for any of the first three transitions between TIM functional states leads to decreased total entropy production. Only the MaxEP requirement for the product (R-glyceraldehyde-3-phosphate) release step led to a 30% increase in enzyme activity, specificity constant k cat /K M , and overall entropy production. The product release step, due to the TIM molecular machine working in the physiological direction of glycolysis, has not been identified before as the rate-limiting step by using irreversible thermodynamics. Together with structural studies, our results open the possibility for finding amino acid substitutions leading to an increased frequency of loop six opening and product release.

  20. Factors influencing patient disclosure to physicians in birth control clinics: an application of the communication privacy management theory.

    PubMed

    Lewis, Cara C; Matheson, Deborah H; Brimacombe, C A Elizabeth

    2011-09-01

    The focus of the current study is whether, and why, female patients limit or alter their personal histories when discussing sensitive subject matter with their physician in birth control clinics. Fifty-six female patients (M = 21.6 years, SD = 3.05) completed anonymous questionnaires exploring their comfort with and ability to disclose personal histories in the immediately preceding interview with the physician. The present study used communication privacy management (CPM) as the theoretical lens through which to view the interaction. Approximately one-half of the sample (46%) reported limiting or altering information. Patients with a highly permeable privacy orientation, as evidenced by a history of open communication regarding sexual issues, were those who reported fully disclosing to their physicians. Of the physician characteristics considered to map onto patient privacy rules, the physician's gender, hurriedness, friendliness, use of a first-name introduction, and open-ended questions were significantly related to patients' reported ease in fully disclosing personal information (p < .05). This study presents a novel application of CPM and has implications for training medical students and for parent-child communication regarding sexual issues.

  1. SOLPS modeling of the effect on plasma detachment of closing the lower divertor in DIII-D

    DOE PAGES

    Sang, C. F.; Stangeby, P. C.; Guo, H. Y.; ...

    2016-12-15

    SOLPS modeling has been carried out to assess the effect of tightly closing the lower divertor in DIII-D, which at present is almost fully open, on the achievement of cold dissipative/detached divertor conditions. To isolate the impact of other factors on the divertor plasma solution and to make direct comparisons, most of the parameters including the meshes were kept as similar as possible. Only the neutral baffling was modified to compare a fully open divertor with a tightly closed one. The modeling shows that the tightly closed divertor greatly improves trapping of recycling neutrals, thereby increasing radiative and charge exchangemore » losses in the divertor and reducing the electron temperature T et and deposited power density q dep at the target plate. Furthermore, the closed structure enables the divertor plasma to enter into highly dissipative and detached divertor conditions at a significantly lower upstream density. The effects of divertor closure on the neutral density and pressure, and their correlation with the divertor plasma conditions are also demonstrated. The effect of molecular D 2- ion D + elastic collisions and neutral-neutral collisions on the divertor plasma solution are assessed.« less

  2. Student Positions on the Relationship between Evolution and Creation: What Kinds of Changes Occur and for What Reasons?

    ERIC Educational Resources Information Center

    Yasri, Pratchayapong; Mancy, Rebecca

    2016-01-01

    Student positions on the relationship between biological evolution and divine creation have been examined in a range of contexts, and although there is evidence that students can change their position on the relationship over a period of study, these changes have not been well characterized or fully quantified. To investigate student changes in…

  3. Step-by-step guide to building an inexpensive 3D printed motorized positioning stage for automated high-content screening microscopy.

    PubMed

    Schneidereit, Dominik; Kraus, Larissa; Meier, Jochen C; Friedrich, Oliver; Gilbert, Daniel F

    2017-06-15

    High-content screening microscopy relies on automation infrastructure that is typically proprietary, non-customizable, costly and requires a high level of skill to use and maintain. The increasing availability of rapid prototyping technology makes it possible to quickly engineer alternatives to conventional automation infrastructure that are low-cost and user-friendly. Here, we describe a 3D printed inexpensive open source and scalable motorized positioning stage for automated high-content screening microscopy and provide detailed step-by-step instructions to re-building the device, including a comprehensive parts list, 3D design files in STEP (Standard for the Exchange of Product model data) and STL (Standard Tessellation Language) format, electronic circuits and wiring diagrams as well as software code. System assembly including 3D printing requires approx. 30h. The fully assembled device is light-weight (1.1kg), small (33×20×8cm) and extremely low-cost (approx. EUR 250). We describe positioning characteristics of the stage, including spatial resolution, accuracy and repeatability, compare imaging data generated with our device to data obtained using a commercially available microplate reader, demonstrate its suitability to high-content microscopy in 96-well high-throughput screening format and validate its applicability to automated functional Cl - - and Ca 2+ -imaging with recombinant HEK293 cells as a model system. A time-lapse video of the stage during operation and as part of a custom assembled screening robot can be found at https://vimeo.com/158813199. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  4. Successful mental health promotion with men: the evidence from 'tacit knowledge'.

    PubMed

    Robertson, Steve; Gough, Brendan; Hanna, Esmée; Raine, Gary; Robinson, Mark; Seims, Amanda; White, Alan

    2018-04-01

    There remains significant concern about men's mental health, particularly in terms of personal and societal barriers to help-seeking, negative coping mechanisms and high suicide rates. This article presents findings from a multi-phase study looking at 'what works' in mental health promotion for men. Work here reports the collection and analysis of the tacit knowledge of those working within mental health promotion interventions for men. A 'multiple hub and spoke' approach was used to assist data collection. Thirteen key players, active in the men's mental health field, half from the UK and half beyond, formed an Investigative Network collecting data, mainly through interviews, from wider geographical and professional community contexts where they had networks. The focus of data collection was on 'what works' in mental health promotion for men. Data was analysed using thematic analysis techniques. Findings suggest that settings which created safe male spaces acted to promote trust, reduce stigma and normalize men's engagement in interventions. Embedding interventions within the communities of men being engaged, fully involving these men, and holding 'male-positive' values engendered familiarity and consolidated trust. Using 'male-sensitive' language and activity-based approaches allowed for positive expressions of emotions, facilitated social engagement, and provided a base for open communication. Appropriate partnerships were also seen as a necessary requirement for success and as crucial for maximizing intervention impact. The importance of gender and 'masculinity' was apparent throughout these findings and taking time to understand gender could facilitate positive ways of working alongside men, increasing levels of engagement and successful outcomes.

  5. Hydraulically-activated operating system for an electric circuit breaker

    DOEpatents

    Imam, Imdad; Barkan, Philip

    1979-01-01

    This operating system comprises a fluid motor having a piston, a breaker-opening space at one side of the piston, and a breaker-closing space at its opposite side. An accumulator freely communicates with the breaker-opening space for supplying pressurized fluid thereto during a circuit-breaker opening operation. A normally-closed valve located on the breaker-closing-side of the piston is openable to release liquid from the breaker-closing space so that pressurized liquid in the breaker-opening space can drive the piston in an opening direction. Means is provided for restoring the valve to its closed position following the circuit-breaker opening operation. An impeded passage affords communication between the accumulator and the breaker-closing space to allow pressurized liquid to flow from the accumulator to the breaker-closing space and develop a pressure therein substantially equal to accumulator pressure when the valve is restored to closed position following breaker-opening. This passage is so impeded that the flow therethrough from the accumulator into the breaker-closing space is sufficiently low during initial opening motion of the piston through a substantial portion of its opening stroke as to avoid interference with said initial opening motion of the piston.

  6. Photovoltaic system with improved DC connections and method of making same

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cioffi, Philip Michael; Todorovic, Maja Harfman; Herzog, Michael Scott

    A micro-inverter assembly includes a housing having an opening formed in a bottom surface thereof, and a direct current (DC)-to-alternating current (AC) micro-inverter disposed within the housing at a position adjacent to the opening. The micro-inverter assembly further includes a micro-inverter DC connector electrically coupled to the DC-to-AC micro-inverter and positioned within the opening of the housing, the micro-inverter DC connector having a plurality of exposed electrical contacts.

  7. Openness as a predictor of political orientation and conventional and unconventional political activism in Western and Eastern Europe.

    PubMed

    Roets, Arne; Cornelis, Ilse; Van Hiel, Alain

    2014-01-01

    This study provides a comprehensive investigation of the relationship between Openness and political orientation and activism in Europe. Analyses were conducted on the 4 waves of the European Social Survey, including large representative samples in up to 26 European countries (total N > 175,000). In line with previous studies, a robust, positive relationship between Openness and left-wing political orientation was obtained in Western Europe. However, in Eastern Europe, the relationship between Openness and political orientation was weaker, and reversed in 3 out of 4 waves. Moreover, Openness yielded significant positive relationships with unconventional activism and to a lesser degree with conventional activism. The magnitude of the relationship between Openness and activism was dependent on political orientation and region. Stronger associations between Openness and activism were found for those having a left-wing orientation in Western Europe, whereas in Eastern Europe, Openness was somewhat stronger related to activism for those having a right-wing orientation. In the discussion we elaborate on the role of the geopolitical context in the relationship between Openness and political variables.

  8. Charging system and method for multicell storage batteries

    DOEpatents

    Cox, Jay A.

    1978-01-01

    A battery-charging system includes a first charging circuit connected in series with a plurality of battery cells for controlled current charging. A second charging circuit applies a controlled voltage across each individual cell for equalization of the cells to the fully charged condition. This controlled voltage is determined at a level above the fully charged open-circuit voltage but at a sufficiently low level to prevent corrosion of cell components by electrochemical reaction. In this second circuit for cell equalization, a transformer primary receives closely regulated, square-wave voltage which is coupled to a plurality of equal secondary coil windings. Each secondary winding is connected in parallel to each cell of a series-connected pair of cells through half-wave rectifiers and a shared, intermediate conductor.

  9. AD Hoc Study on Human Robot Interface Issues

    DTIC Science & Technology

    2002-09-01

    of joint range of motion limits on strength. When the angle of a fully deflected aircraft rudder/ brake pedal is beyond the limit of ankle...mobility, the pedal will seem to have excessive resistance. In addition, this will prevent the pilot from fully utilizing the brakes of the aircraft...importance and value added of HE efforts. 34 Center High-Mounted Brake Lights. In 1985, after extensive HE studies showing positive

  10. Automation and Preclinical Evaluation of a Dedicated Emission Mammotomography System for Fully 3-D Molecular Breast Imaging

    DTIC Science & Technology

    2009-10-01

    molecular breast imaging, with the ability to dynamically contour any sized breast, will improve detection and potentially in vivo characterization of...Having flexible 3D positioning about the breast yielded minimal RMSD differences, which is important for high resolution molecular emission imaging. This...TITLE: Automation and Preclinical Evaluation of a Dedicated Emission Mammotomography System for Fully 3-D Molecular Breast Imaging PRINCIPAL

  11. Shuttlecock detection system for fully-autonomous badminton robot with two high-speed video cameras

    NASA Astrophysics Data System (ADS)

    Masunari, T.; Yamagami, K.; Mizuno, M.; Une, S.; Uotani, M.; Kanematsu, T.; Demachi, K.; Sano, S.; Nakamura, Y.; Suzuki, S.

    2017-02-01

    Two high-speed video cameras are successfully used to detect the motion of a flying shuttlecock of badminton. The shuttlecock detection system is applied to badminton robots that play badminton fully autonomously. The detection system measures the three dimensional position and velocity of a flying shuttlecock, and predicts the position where the shuttlecock falls to the ground. The badminton robot moves quickly to the position where the shuttle-cock falls to, and hits the shuttlecock back into the opponent's side of the court. In the game of badminton, there is a large audience, and some of them move behind a flying shuttlecock, which are a kind of background noise and makes it difficult to detect the motion of the shuttlecock. The present study demonstrates that such noises can be eliminated by the method of stereo imaging with two high-speed cameras.

  12. Open Adoption of Infants: Adoptive Parents' Perceptions of Advantages and Disadvantages.

    ERIC Educational Resources Information Center

    Siegel, Deborah H.

    1993-01-01

    Conducted qualitative study of adoptive parents' (n=21 couples) reactions to recent open adoptions of their infants. Findings indicated overwhelmingly positive feelings about open adoption. Respondents often noted that issue of openness was eclipsed by other concerns: coping with infertility, finding a baby, dealing with personnel, and dealing…

  13. The influence of visual feedback from the recent past on the programming of grip aperture is grasp-specific, shared between hands, and mediated by sensorimotor memory not task set.

    PubMed

    Tang, Rixin; Whitwell, Robert L; Goodale, Melvyn A

    2015-05-01

    Goal-directed movements, such as reaching out to grasp an object, are necessarily constrained by the spatial properties of the target such as its size, shape, and position. For example, during a reach-to-grasp movement, the peak width of the aperture formed by the thumb and fingers in flight (peak grip aperture, PGA) is linearly related to the target's size. Suppressing vision throughout the movement (visual open loop) has a small though significant effect on this relationship. Visual open loop conditions also produce a large increase in the PGA compared to when vision is available throughout the movement (visual closed loop). Curiously, this differential effect of the availability of visual feedback is influenced by the presentation order: the difference in PGA between closed- and open-loop trials is smaller when these trials are intermixed (an effect we have called 'homogenization'). Thus, grasping movements are affected not only by the availability of visual feedback (closed loop or open loop) but also by what happened on the previous trial. It is not clear, however, whether this carry-over effect is mediated through motor (or sensorimotor) memory or through the interference of different task sets for closed-loop and open-loop feedback that determine when the movements are fully specified. We reasoned that sensorimotor memory, but not a task set for closed and open loop feedback, would be specific to the type of response. We tested this prediction in a condition in which pointing to targets was alternated with grasping those same targets. Critically, in this condition, when pointing was performed in open loop, grasping was always performed in closed loop (and vice versa). Despite the fact that closed- and open-loop trials were alternating in this condition, we found no evidence for homogenization of the PGA. Homogenization did occur, however, in a follow-up experiment in which grasping movements and visual feedback were alternated between the left and the right hand, indicating that sensorimotor (or motor) memory can operate both within and between hands when the response type is kept the same. In a final experiment, we ruled out the possibility that simply alternating the hand used to perform the grasp interferes with motor or sensorimotor memory. We did this by showing that when the hand was alternated within a block of exclusively closed- or open-loop trials, homogenization of the PGA did not occur. Taken together, the results suggest that (1) interference from simply switching between task sets for closed or open-loop feedback or from switching between the hands cannot account homogenization in the PGA and that (2) the programming and execution of grasps can borrow not only from grasping movements executed in the past by the same hand, but also from grasping movements executed with the other hand. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. 33 CFR 117.729 - Mantua Creek.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... OPERATION REGULATIONS Specific Requirements New Jersey § 117.729 Mantua Creek. (a) The draw of the CONRAIL... shall be left in the open position to vessels and will only be closed for the passage of trains and to... green. (2) From December to February, the draw may be left in the closed position and opened on signal...

  15. 33 CFR 117.741 - Raccoon Creek.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements New Jersey § 117.741 Raccoon Creek. (a) The draw of... through November 30, the draw shall be left in the open position at all times and will only be closed for... to flashing green. (2) At all other times, the draw may be left in the closed position and opened on...

  16. 33 CFR 117.741 - Raccoon Creek.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements New Jersey § 117.741 Raccoon Creek. (a) The draw of... through November 30, the draw shall be left in the open position at all times and will only be closed for... to flashing green. (2) At all other times, the draw may be left in the closed position and opened on...

  17. 33 CFR 117.729 - Mantua Creek.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... OPERATION REGULATIONS Specific Requirements New Jersey § 117.729 Mantua Creek. (a) The draw of the CONRAIL... shall be left in the open position to vessels and will only be closed for the passage of trains and to... green. (2) From December to February, the draw may be left in the closed position and opened on signal...

  18. Are Soft Short Tests Good Indicators of Internal Li-ion Cell Defects?

    NASA Technical Reports Server (NTRS)

    Jeevarajan, J.; Chung, J.-S.; Jung, K.; Park, J.

    2013-01-01

    The self discharge test at full state of charge, may not be a good one to detect subtle defects since the li-ion chemistry has the highest self discharge at full state of charge. One should characterize self discharge versus storage time for each cell manufacturer/design to differentiate between normal self discharge and that due to a subtle manufacturing defect. The various soft short test methods indicate that if this test is carried out at full discharge (0% SOC) with all capacity removed (by lowering the current load in a stepwise manner to the same end of discharge voltage), then the cells need to be placed in storage for more than 72 hours to get a good analysis on the presence of subtle defects since it takes more than 72 hours to achieve voltage stabilization. If the cells are to be charged up even to a small percentage (ex. 1%), 72 hours are sufficient to determine issues. However, the pass/fail criteria should be based on a valid OCV decline. Less than 10 mV voltage decline is not a good method to detect subtle defects. As mentioned in the first bullet, self discharge is a competing reaction when a charge is introduced and hence a characterization of the self discharge versus storage time is required to fully correlate voltage decline to a failure due to a subtle defect. Soft short test method cannot be relied on for defect detection because cells with and without voltage decline seemed to have similar defects and characteristics. Screening methods such as internal resistance and capacity as well as a 3-sigma range for OCV, mass and dimensions should be used to screen out outliers. A very critical aspect in the understanding of subtle defects is to carry out destructive analysis of cells from every lot to confirm the quality of production and screen all cells and batteries in a stringent manner to have a high quality set of flight cells. Self Discharge Test: Fully charged cells shall be placed in Open circuit stand for 72 hours (OCV measurement twice a day); continue for total of 14 days with 1 reading per day 2. Soft Short Test 1: Fully charge; cells discharged to manufacturer's end of disch. Voltage (EODV) cutoff at C/5 rate; stand for 30 minutes; discharge with C/500 to the same EODV. stand for another 30 minutes; discharge the cells again using C/1000 current to the same EODV. OCV measurements twice a day for 72 hours and then for total of 14 days (data collection same as in 1.) 3. Soft Short Test 2: Fully charge; cells discharged to the manuf. EODV with a C/13 constant current; provide a 10 hour rest, discharge again to the same EODV with a current of C/250, provide a 10 hour rest, discharge again using a C/250 rate, provide a 24 hour rest, charge using C/250 to 3.15 V (for 12 hours). OCV measurements twice a day for at 72 hours. (data collection same as in 1.) 4. Soft Short Test 3: Fully charge; cells shall be discharged using C/10 current to manuf. EODV. Allow the cell to remain at Open circuit for 10 seconds. Discharge the cell at C/20 rate to the same EODV, hold open circuit for 24 hours. Discharge the cells at C/200 rate to the same end of voltage cutoff and hold open circuit for 24 hours. Discharge the cells one more time at C/200 rate to the same EODV and hold open circuit for 36 hours. Charge at C/200 rate to 3.15 V and hold for 3 days. Record OCV during the open circuit stand periods every 12 hours and at the beginning and end of the 3 day hold (include the 12 hour OCV recording during this time also). Capacity Cycling: Cells with declining voltages - one cell from each manufacturer chosen for cycling Destructive Physical Analysis (DPA): Cells with and without decline chosen from each lot for DPA.

  19. Ordered Conformational Changes in Damaged DNA Induced by Nucleotide Excision Repair Factors*

    PubMed Central

    Tapias, Angels; Auriol, Jerome; Forget, Diane; Enzlin, Jacqueline H.; Schärer, Orlando D; Coin, Frederic; Coulombe, Benoit; Egly, Jean-Marc

    2015-01-01

    In response to genotoxic attacks, cells activate sophisticated DNA repair pathways such as nucleotide excision repair (NER), which consists of damage removal via dual incision and DNA resynthesis. Using permanganate footprinting as well as highly purified factors, we show that NER is a dynamic process that takes place in a number of successive steps during which the DNA is remodeled around the lesion in response to the various NER factors. XPC/HR23B first recognizes the damaged structure and initiates the opening of the helix from position −3 to +6. TFIIH is then recruited and, in the presence of ATP, extends the opening from position −6 to +6; it also displaces XPC downstream from the lesion, thereby providing the topological structure for recruiting XPA and RPA, which will enlarge the opening. Once targeted by XPG, the damaged DNA is further melted from position −19 to +8. XPG and XPF/ERCC1 endo-nucleases then cut the damaged DNA at the limit of the opened structure that was previously “labeled” by the positioning of XPC/HR23B and TFIIH. PMID:14981083

  20. Enhancing creativity: Proper body posture meets proper emotion.

    PubMed

    Hao, Ning; Xue, Hua; Yuan, Huan; Wang, Qing; Runco, Mark A

    2017-02-01

    This study tested whether compatibility or incompatibility between body posture and emotion was beneficial for creativity. In Study 1, participants were asked to solve the Alternative Uses Task (AUT) problems when performing open or closed body posture in positive or negative emotional state respectively. The results showed that originality of AUT performance was higher in the compatible conditions (i.e., open-positive and closed-negative) than in the incompatible conditions (i.e., closed-positive and open-negative). In Study 2, the compatibility effect was replicated in both the AUT and the Realistic Presented Problem test (i.e., RPP). Moreover, it was revealed that participants exhibited the highest associative flexibility in the open-positive condition, and the highest persistence in the closed-negative condition. These findings indicate that compatibility between body posture and emotion is beneficial for creativity. This may be because when the implicit emotions elicited by body posture match explicit emotions, the effects of emotions on creativity are enhanced, therefore promoting creativity through the flexibility or the persistence pathway respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. The value of health care information exchange and interoperability.

    PubMed

    Walker, Jan; Pan, Eric; Johnston, Douglas; Adler-Milstein, Julia; Bates, David W; Middleton, Blackford

    2005-01-01

    In this paper we assess the value of electronic health care information exchange and interoperability (HIEI) between providers (hospitals and medical group practices) and independent laboratories, radiology centers, pharmacies, payers, public health departments, and other providers. We have created an HIEI taxonomy and combined published evidence with expert opinion in a cost-benefit model. Fully standardized HIEI could yield a net value of dollar 77.8 billion per year once fully implemented. Nonstandardized HIEI offers smaller positive financial returns. The clinical impact of HIEI for which quantitative estimates cannot yet be made would likely add further value. A compelling business case exists for national implementation of fully standardized HIEI.

  2. Non-Markovian dynamics of open quantum systems

    NASA Astrophysics Data System (ADS)

    Fleming, Chris H.

    An open quantum system is a quantum system that interacts with some environment whose degrees of freedom have been coarse grained away. This model describes non-equilibrium processes more general than scattering-matrix formulations. Furthermore, the microscopically-derived environment provides a model of noise, dissipation and decoherence far more general than Markovian (white noise) models. The latter are fully characterized by Lindblad equations and can be motivated phenomenologically. Non-Markovian processes consistently account for backreaction with the environment and can incorporate effects such as finite temperature and spatial correlations. We consider linear systems with bilinear coupling to the environment, or quantum Brownian motion, and nonlinear systems with weak coupling to the environment. For linear systems we provide exact solutions with analytical results for a variety of spectral densities. Furthermore, we point out an important mathematical subtlety which led to incorrect master-equation coefficients in earlier derivations, given nonlocal dissipation. For nonlinear systems we provide perturbative solutions by translating the formalism of canonical perturbation theory into the context of master equations. It is shown that unavoidable degeneracy causes an unfortunate reduction in accuracy between perturbative master equations and their solutions. We also extend the famous theorem of Lindblad, Gorini, Kossakowski and Sudarshan on completely positivity to non-Markovian master equations. Our application is primarily to model atoms interacting via a common electromagnetic field. The electromagnetic field contains correlations in both space and time, which are related to its relativistic (photon-mediated) nature. As such, atoms residing in the same field experience different environmental effects depending upon their relative position and orientation. Our more accurate solutions were necessary to assess sudden death of entanglement at zero temperature. In contrast to previous claims, we found that all initial states of two-level atoms undergo finite-time disentanglement. We were also able to access regimes which cannot be described by Lindblad equations and other simpler methods, such as near resonance. Finally we revisit the infamous Abraham-Lorentz force, wherein a single particle in motion experiences backreaction from the electromagnetic field. This leads to a number of well-known problems including pre-acceleration and runaway solutions. We found a more a more-suitable open-system treatment of the nonrelativistic particle to be perfectly causal and dissipative without any extraneous requirements for finite size of the particle, weak coupling to the field, etc..

  3. Drapery assembly including insulated drapery liner

    DOEpatents

    Cukierski, Gwendolyn

    1983-01-01

    A drapery assembly is disclosed for covering a framed wall opening, the assembly including drapery panels hung on a horizontal traverse rod, the rod having a pair of master slides and means for displacing the master slides between open and closed positions. A pair of insulating liner panels are positioned behind the drapery, the remote side edges of the liner panels being connected with the side portions of the opening frame, and the adjacent side edges of the liner panels being connected with a pair of vertically arranged center support members adapted for sliding movement longitudinally of a horizontal track member secured to the upper horizontal portion of the opening frame. Pivotally arranged brackets connect the center support members with the master slides of the traverse rod whereby movement of the master slides to effect opening and closing of the drapery panels effects simultaneous opening and closing of the liner panels.

  4. International outreach for promoting open geoscience content in Finnish university libraries - libraries as the advocates of citizen science awareness on emerging open geospatial data repositories in Finnish society

    NASA Astrophysics Data System (ADS)

    Rousi, A. M.; Branch, B. D.; Kong, N.; Fosmire, M.

    2013-12-01

    In their Finnish National Spatial Strategy 2010-2015 the Finland's Ministry of Agriculture and Forestry delineated e.g. that spatial data skills should support citizens everyday activities and facilitate decision-making and participation of citizens. Studies also predict that open data, particularly open spatial data, would create, when fully realizing their potential, a 15% increase into the turnovers of Finnish private sector companies. Finnish libraries have a long tradition of serving at the heart of Finnish information society. However, with the emerging possibilities of educating their users on open spatial data a very few initiatives have been made. The National Survey of Finland opened its data in 2012. Finnish technology university libraries, such as Aalto University Library, are open environments for all citizens, and seem suitable of being the first thriving entities in educating citizens on open geospatial data. There are however many obstacles to overcome, such as lack of knowledge about policies, lack of understanding of geospatial data services and insufficient know-how of GIS software among the personnel. This framework examines the benefits derived from an international collaboration between Purdue University Libraries and Aalto University Library to create local strategies in implementing open spatial data education initiatives in Aalto University Library's context. The results of this international collaboration are explicated for the benefit of the field as a whole.

  5. A numerical study on shear buckling capacity of Z-section steel purlin with opening

    NASA Astrophysics Data System (ADS)

    De'nan, Fatimah; Keong, Choong Kok; Hashim, Nor Salwani; Yuting, Ng

    2017-10-01

    Cold-formed Z-section steel purlin is one of the most commonly available steel purlin worldwide. A numerical study on Z-section steel purlin with opening under shear loading was carried out. Six (6) variables such as opening size, opening shape, section type, opening distance, opening position and opening arrangement were identified and tested to investigate their effect on shear capacity of Z-section steel purlin. Results indicated that the presence of web opening did not improve the shear behaviour of Z-section steel purlin. However, non-negligible improvement in terms of volume reduction was observed. Each 0.1D (where D is the section height) enlargement of opening size caused an approximate 10% drop in shear buckling capacity (SBC) while volume reduction (VR) increased exponentially. Diamond shape performed up to 55% better in SBC compared to circular shape opening but circular shape opening performed up to 24% better in VR. Sections with smaller section height had higher SBC compared to sections with bigger section height. Nevertheless, sections with bigger section height had higher VR. No significant difference in terms of shear buckling capacity was observed when opening distance was manipulated. Opening position had no effect on SBC and VR. Opening arrangement had no significant effect on SBC and VR. An optimal section of Z100-19 with 0.3D to 0.5D diamond shaped opening and an opening distance of 100mm centre to centre depending on design engineer's specification is proposed.

  6. 33 CFR 207.476 - The Inland Route-lock in Crooked River, Alanson, Mich.; use, administration, and navigation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... feet. (3) Height above water—15 feet when upper pool is at low water datum. (4) Draft—6 feet when lower pool is at low water datum. (e) Signals. (1) Craft desiring lockage in either direction shall give... securely moored until the exit lock gate is fully open and the lock horn sounds one blast. (7) When the...

  7. 33 CFR 207.476 - The Inland Route-lock in Crooked River, Alanson, Mich.; use, administration, and navigation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... feet. (3) Height above water—15 feet when upper pool is at low water datum. (4) Draft—6 feet when lower pool is at low water datum. (e) Signals. (1) Craft desiring lockage in either direction shall give... securely moored until the exit lock gate is fully open and the lock horn sounds one blast. (7) When the...

  8. 33 CFR 207.476 - The Inland Route-lock in Crooked River, Alanson, Mich.; use, administration, and navigation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... feet. (3) Height above water—15 feet when upper pool is at low water datum. (4) Draft—6 feet when lower pool is at low water datum. (e) Signals. (1) Craft desiring lockage in either direction shall give... securely moored until the exit lock gate is fully open and the lock horn sounds one blast. (7) When the...

  9. Evaluating the Implementation of the Online Tutorial for the Universitas Terbuka Distance Learning Bachelor Degree Program in Indonesia

    ERIC Educational Resources Information Center

    Zubaidah, Ida

    2013-01-01

    Universitas Terbuka (UT), the Indonesia Open University and the 45th state university in the country, is the only one that uses distance learning as its sole mode of delivery and instruction. Although UT has operated for 28 years, unlike face-to-face classroom-based education, distance education has not been considered as a fully legitimate…

  10. Challenging, Eye-Opening, and Changing U.S. Teacher Training in Korea: Creating Experiences That Will Enhance Global Perspectives

    ERIC Educational Resources Information Center

    Oh, Kevin; Nussli, Natalie

    2014-01-01

    This case study explored the short-term international experience of pre-service teachers to create and enhance global perspectives. These teachers (n = 5), all female graduate students at a university in the U.S., were fully immersed in a foreign culture for three weeks while teaching English to primary and secondary students in Korea. Pre-,…

  11. Transcriptome analysis of tanoak reveals divergent mechanisms of innate and phosphite-induced resistance to Phytophthora ramorum

    Treesearch

    Catherine A. Eyre; Katherine J. Hayden; Peter Croucher; Shannon Schechter; Jessica W. Wright; Matteo Garbelotto

    2017-01-01

    Phosphite compounds have been used in the control of sudden oak death; however, their precise mode of action is not fully understood. To study the action of phosphite compounds in the context of naturally occurring host resistance, we first identified open-pollinated family groups that carried resistance, that is in which approximately 20% of offspring demonstrated a...

  12. The Pixhawk Open-Source Computer Vision Framework for Mavs

    NASA Astrophysics Data System (ADS)

    Meier, L.; Tanskanen, P.; Fraundorfer, F.; Pollefeys, M.

    2011-09-01

    Unmanned aerial vehicles (UAV) and micro air vehicles (MAV) are already intensively used in geodetic applications. State of the art autonomous systems are however geared towards the application area in safe and obstacle-free altitudes greater than 30 meters. Applications at lower altitudes still require a human pilot. A new application field will be the reconstruction of structures and buildings, including the facades and roofs, with semi-autonomous MAVs. Ongoing research in the MAV robotics field is focusing on enabling this system class to operate at lower altitudes in proximity to nearby obstacles and humans. PIXHAWK is an open source and open hardware toolkit for this purpose. The quadrotor design is optimized for onboard computer vision and can connect up to four cameras to its onboard computer. The validity of the system design is shown with a fully autonomous capture flight along a building.

  13. An ``Openable,'' High-Strength Gradient Set for Orthopedic MRI

    NASA Astrophysics Data System (ADS)

    Crozier, Stuart; Roffmann, Wolfgang U.; Luescher, Kurt; Snape-Jenkinson, Christopher; Forbes, Lawrence K.; Doddrell, David M.

    1999-07-01

    A novel three-axis gradient set and RF resonator for orthopedic MRI has been designed and constructed. The set is openable and may be wrapped around injured joints. The design methodology used was the minimization of magnetic field spherical harmonics by simulated annealing. Splitting of the longitudinal coil presents the major design challenge to a fully openable gradient set and in order to efficiently design such coils, we have developed a new fast algorithm for determining the magnetic field spherical harmonics generated by an arc of multiturn wire. The algorithm allows a realistic impression of the effect of split longitudinal designs. A prototype set was constructed based on the new designs and tested in a 2-T clinical research system. The set generated 12 mT/m/A with a linear region of 12 cm and a switching time of 100 μs, conforming closely with theoretical predictions. Preliminary images from the set are presented.

  14. Efficient Sample Tracking With OpenLabFramework

    PubMed Central

    List, Markus; Schmidt, Steffen; Trojnar, Jakub; Thomas, Jochen; Thomassen, Mads; Kruse, Torben A.; Tan, Qihua; Baumbach, Jan; Mollenhauer, Jan

    2014-01-01

    The advance of new technologies in biomedical research has led to a dramatic growth in experimental throughput. Projects therefore steadily grow in size and involve a larger number of researchers. Spreadsheets traditionally used are thus no longer suitable for keeping track of the vast amounts of samples created and need to be replaced with state-of-the-art laboratory information management systems. Such systems have been developed in large numbers, but they are often limited to specific research domains and types of data. One domain so far neglected is the management of libraries of vector clones and genetically engineered cell lines. OpenLabFramework is a newly developed web-application for sample tracking, particularly laid out to fill this gap, but with an open architecture allowing it to be extended for other biological materials and functional data. Its sample tracking mechanism is fully customizable and aids productivity further through support for mobile devices and barcoded labels. PMID:24589879

  15. Characteristics of a wind-actuated aerodynamic braking device for high-speed trains

    NASA Astrophysics Data System (ADS)

    Takami, H.; Maekawa, H.

    2017-04-01

    To shorten the stopping distance of the high speed trains in case of emergency, we developed a small-sized aerodynamic braking unit without use of the friction between a rail and a wheel. The developed device could actuate a pair of two drag panels with a travelling wind. However, after the drag panel fully opened, vibrational movements of the drag panel characterized by its slight flutter were repeated. In this study, to stabilize the opened panel, matters pertaining to the angle of attack with respect to the drag panel and pertaining to the arrangement of the two panels were examined by a wind tunnel experiment using a scale model. As a result, to stabilize the opened panel and to keep the good performance of the braking device, it is found out that an angle of attack of 75 to 80 degrees is suitable provided that the interval of the two panels is narrow enough.

  16. Structural mechanism of JH delivery in hemolymph by JHBP of silkworm, Bombyx mori

    PubMed Central

    Suzuki, Rintaro; Fujimoto, Zui; Shiotsuki, Takahiro; Tsuchiya, Wataru; Momma, Mitsuru; Tase, Akira; Miyazawa, Mitsuhiro; Yamazaki, Toshimasa

    2011-01-01

    Juvenile hormone (JH) plays crucial roles in many aspects of the insect life. All the JH actions are initiated by transport of JH in the hemolymph as a complex with JH-binding protein (JHBP) to target tissues. Here, we report structural mechanism of JH delivery by JHBP based upon the crystal and solution structures of apo and JH-bound JHBP. In solution, apo-JHBP exists in equilibrium of multiple conformations with different orientations of the gate helix for the hormone-binding pocket ranging from closed to open forms. JH-binding to the gate-open form results in the fully closed JHBP-JH complex structure where the bound JH is completely buried inside the protein. JH-bound JHBP opens the gate helix to release the bound hormone likely by sensing the less polar environment at the membrane surface of target cells. This is the first report that provides structural insight into JH signaling. PMID:22355650

  17. Short-Term Flooding Effects on Gas Exchange and Quantum Yield of Rabbiteye Blueberry (Vaccinium ashei Reade) 1

    PubMed Central

    Davies, Frederick S.; Flore, James A.

    1986-01-01

    Roots of 1.5-year-old `Woodard' rabbiteye blueberry plants (Vaccinium ashei Reade) were flooded in containers or maintained at container capacity over a 5-day period. Carbon assimilation, and stomatal and residual conductances were monitored on one fully expanded shoot/plant using an open flow gas analysis system. Quantum yield was calculated from light response curves. Carbon assimilation and quantum yield of flooded plants decreased to 64 and 41% of control values, respectively, after 1 day of flooding and continued decreasing to 38 and 27% after 4 days. Stomatal and residual conductances to CO2 also decreased after 1 day of flooding compared with those of unflooded plants with residual conductance severely limiting carbon assimilation after 4 days of flooding. Stomatal opening occurred in 75 to 90 minutes and rate of opening was unaffected by flooding. PMID:16664791

  18. Different mechanisms at different temperatures for the ring-opening polymerization of lactide catalyzed by binuclear magnesium and zinc alkoxides.

    PubMed

    Sun, Yangyang; Cui, Yaqin; Xiong, Jiao; Dai, Zhongran; Tang, Ning; Wu, Jincai

    2015-10-07

    Two binuclear magnesium and zinc alkoxides supported by a bis-salalen type dinucleating heptadentate Schiff base ligand were synthesized and fully characterized. The two complexes are efficient initiators for the ring-opening polymerization (ROP) of L-lactide, affording polymers with narrow polydispersities and desirable molecular weights. Interestingly, the mechanisms for the ROP of lactide are different at different temperatures. At a high temperature of 130 °C, a coordination-insertion mechanism is reasonable for the bulk melt polymerization of lactide. At a low temperature, the alkoxide cannot initiate the ROP reaction; however, upon the addition of external benzyl alcohol into the system, the ROP of lactide can smoothly proceed via an "activated monomer" mechanism. In addition, these complexes display slight stereo-selectivity for the ring-opening polymerization of rac-lactide, affording partially isotactic polylactide in toluene with a Pm value of 0.59.

  19. A simulation for the gated weir opening of Wonokromo River, Rungkut District, Surabaya

    NASA Astrophysics Data System (ADS)

    Handajani, N.; Wahjudijanto, I.; Mu'afi, M.

    2018-01-01

    The gated weir is a weir that the crest elevation could be operated based on the flow through the river. The upstream water level of the gated weir could be controlled with gate opening or closing. This study applied a simulation with HEC-RAS 4,0 program in order to know the river hydraulic condition after the gated weir has built. According to the rainfall intensity from each sub-watershed, Distribution Log Pearson III with return period 50 years (Q50) was determined to calculate the design flood discharge. By using Rational Method, the design flood discharge is 470 m3/s. The Results show that capacity of the river is able to accomodate Q50 with discharge 470 m3/s and the gate should be fully opened during flood. This condition could passed the normal discharge at + 5.00 m elevation.

  20. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Marousky, F.J.; Woltz, S.S.

    The influence of soluble fluoride and a floral preservative (600 ppm 8-hydroxyquinoline citrate + 4% sucrose) on floret opening and quality of cut gladiolus was investigated using several cultivars. All cultivars evaluated showed distinct petal margin deterioration and necrosis at 1 ppm F. Many cultivars showed distinct petal margin discoloration and deterioration with accompanying bract and leaf margin deterioration in 4 days at 0.25 ppm fluoride. Colored flowering cultivars showed more fluoride injury than white or yellow flowering cultivars. Petal margin deterioration was most severe when spikes were continuously exposed to water containing fluoride. Florets on Victory spikes held inmore » water containing fluoride did not open as fully as those on spikes held in water. Floral preservative increased the number of open flowers and sustained floret quality. However, the preservative did not overcome the deleterious effects of fluoride in vase water. 13 references, 2 figures, 4 tables.« less

  1. Open Science CBS Neuroimaging Repository: Sharing ultra-high-field MR images of the brain.

    PubMed

    Tardif, Christine Lucas; Schäfer, Andreas; Trampel, Robert; Villringer, Arno; Turner, Robert; Bazin, Pierre-Louis

    2016-01-01

    Magnetic resonance imaging at ultra high field opens the door to quantitative brain imaging at sub-millimeter isotropic resolutions. However, novel image processing tools to analyze these new rich datasets are lacking. In this article, we introduce the Open Science CBS Neuroimaging Repository: a unique repository of high-resolution and quantitative images acquired at 7 T. The motivation for this project is to increase interest for high-resolution and quantitative imaging and stimulate the development of image processing tools developed specifically for high-field data. Our growing repository currently includes datasets from MP2RAGE and multi-echo FLASH sequences from 28 and 20 healthy subjects respectively. These datasets represent the current state-of-the-art in in-vivo relaxometry at 7 T, and are now fully available to the entire neuroimaging community. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Conformational dynamics of the inner pore helix of voltage-gated potassium channels

    NASA Astrophysics Data System (ADS)

    Choe, Seungho; Grabe, Michael

    2009-06-01

    Voltage-gated potassium (Kv) channels control the electrical excitability of neurons and muscles. Despite this key role, how these channels open and close or gate is not fully understood. Gating is usually attributed to the bending and straightening of pore-lining helices at glycine and proline residues. In this work we focused on the role of proline in the Pro-Val-Pro (PVP) motif of the inner S6 helix in the Kv1.2 channel. We started by developing a simple hinged-rod model to fully explore the configurational space of bent helices and we related these configurations to the degree of pore opening. We then carried out fully atomistic simulations of the S6 helices and compared these simulations to the hinged-rod model. Both methods suggest that Kv1 channels are not tightly closed when the inner helices are straight, unlike what is seen in the non-PVP containing channels KcsA and KirBac. These results invite the possibility that the S6 helices may be kinked when Kv1 channels are closed. Our simulations indicate that the wild-type helix adopts multiple spatially distinct configurations, which is consistent with its role in adopting a closed state and an open state. The two most dominant configurational basins correspond to a 6 Å movement of the helix tail accompanied by the PVP region undergoing a local α-helix to 310-helix transition. We explored how single point mutations affect the propensity of the S6 helix to adopt particular configurations. Interestingly, mutating the first proline, P405 (P473 in Shaker), to alanine completely removed the bistable nature of the S6 helix possibly explaining why this mutation compromises the channel. Next, we considered four other mutations in the area known to affect channel gating and we saw similarly dramatic changes to the helix's dynamics and range of motion. Our results suggest a possible mechanism of helix pore closure and they suggest differences in the closed state of glycine-only channels, like KcsA, and PVP containing channels.

  3. Computer Simulation Studies of Ion Channel Gating: Characteristics of the M2 Channel of Influenza-A Virus in a Phospholipid Bilayer

    NASA Technical Reports Server (NTRS)

    Schweighofer, Karl J.; Pohorille, Andrew; DeVincenzi, D. (Technical Monitor)

    1999-01-01

    The 25 amino acids long, transmembrane fragment of the Influenza virus M2 protein forms a homotetrameric channel that transports protons across lipid bilayers. It has been postulated that high efficiency and selectivity of this process is due to gating by four histidine residues that occlude the channel lumen in the closed state. Two mechanisms of gating have been postulated. In one mechanism, the proton is "shuttled" through the gate by attaching to the delta nitrogen atom on the extracellular side of the imidazole ring, followed by the release of the proton attached to the epsilon nitrogen atom on the opposite side. In the second mechanism, the four histidines move away from each other due to electrostatic repulsion upon protonation, thus opening the gate sufficiently that a wire of water molecules can penetrate the gate. Then, protons are transported by "hopping" along the wire. In this paper, both mechanisms are evaluated in a series of molecular dynamics simulations by investigating stability of different protonation states of the channel that are involved in these mechanisms. For the shuttle mechanism, these are states with all epsilon protonated histidines, one biprotonated residue or one histidine protonated in the delta position. For the gate opening mechanism, this is the state in which all four histidines are biprotonated. In addition, a state with two biprotonated histidines is considered. For each system, composed of the protein channel embedded in phospholipid bilayer located between two water lamellae, a molecular dynamics trajectory of approximately 1.3 ns (after equilibration) was obtained. It is found that the states involved in the shuttle mechanism are stable during the simulations. Furthermore, the orientations and dynamics of water molecules near the gate are conducive to proton transfers involved in the shuttle. In contract, the fully biprotonated state, implicated in the gate opening mechanism, is not stable and the channel looses its structural integrity. If only two histidines are biprotonated the channel deforms but remains intact with the gate mostly closed. In summary, the results of this study lend support to the shuttle mechanism but not to the gate opening mechanism of proton gating in M2.

  4. Harmonic engine

    DOEpatents

    Bennett, Charles L.; Sewall, Noel; Boroa, Carl

    2014-08-19

    An engine based on a reciprocating piston engine that extracts work from pressurized working fluid. The engine includes a harmonic oscillator inlet valve capable of oscillating at a resonant frequency for controlling the flow of working fluid into of the engine. In particular, the inlet valve includes an inlet valve head and a spring arranged together as a harmonic oscillator so that the inlet valve head is moveable from an unbiased equilibrium position to a biased closed position occluding an inlet. Upon releasing the inlet valve the inlet valve head undergoes a single oscillation past the equilibrium positio to a maximum open position and returns to a biased return position close to the closed position to choke the flow and produce a pressure drop across the inlet valve causing the inlet valve to close. Protrusions carried either by the inlet valve head or piston head are used to bump open the inlet valve from the closed position and initiate the single oscillation of the inlet valve head, and protrusions carried either by the outlet valve head or piston head are used to close the outlet valve ahead of the bump opening of the inlet valve.

  5. Fully integrated and encapsulated micro-fabricated vacuum diode and method of manufacturing same

    DOEpatents

    Resnick, Paul J.; Langlois, Eric

    2015-12-01

    Disclosed is an encapsulated micro-diode and a method for producing same. The method comprises forming a plurality columns in the substrate with a respective tip disposed at a first end of the column, the tip defining a cathode of the diode; disposing a sacrificial oxide layer on the substrate, plurality of columns and respective tips; forming respective trenches in the sacrificial oxide layer around the columns; forming an opening in the sacrificial oxide layer to expose a portion of the tips; depositing a conductive material in of the opening and on a surface of the substrate to form an anode of the diode; and removing the sacrificial oxide layer.

  6. Method of manufacturing a fully integrated and encapsulated micro-fabricated vacuum diode

    DOEpatents

    Resnick, Paul J.; Langlois, Eric

    2014-08-26

    Disclosed is an encapsulated micro-diode and a method for producing same. The method comprises forming a plurality columns in the substrate with a respective tip disposed at a first end of the column, the tip defining a cathode of the diode; disposing a sacrificial oxide layer on the substrate, plurality of columns and respective tips; forming respective trenches in the sacrificial oxide layer around the columns; forming an opening in the sacrificial oxide layer to expose a portion of the tips; depositing a conductive material in of the opening and on a surface of the substrate to form an anode of the diode; and removing the sacrificial oxide layer.

  7. 77 FR 29924 - Drawbridge Operation Regulation; Alabama River, AL

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-21

    ... maintained in the closed-to-navigation position, opening only for the passage of marine traffic. The bridge... of openings of the drawbridge, an average of one opening per year, the bridge owner requested a... schedule a bridge opening. Under this proposed rule, the MNBR will also remain in the closed-to-navigation...

  8. The OpenCourseWare Model: High-Impact Open Educational Content

    ERIC Educational Resources Information Center

    Carson, Stephen

    2007-01-01

    OpenCourseWare (OCW) is one among several models for offering open educational resources (OER). This article explains the OCW model and its position within the broader OER context. OCW primarily represents publication of existing course materials already in use for teaching purposes. OCW projects are most often institutional, carrying the…

  9. Anxiety Online—A Virtual Clinic: Preliminary Outcomes Following Completion of Five Fully Automated Treatment Programs for Anxiety Disorders and Symptoms

    PubMed Central

    Meyer, Denny; Austin, David William; Kyrios, Michael

    2011-01-01

    Background The development of e-mental health interventions to treat or prevent mental illness and to enhance wellbeing has risen rapidly over the past decade. This development assists the public in sidestepping some of the obstacles that are often encountered when trying to access traditional face-to-face mental health care services. Objective The objective of our study was to investigate the posttreatment effectiveness of five fully automated self-help cognitive behavior e-therapy programs for generalized anxiety disorder (GAD), panic disorder with or without agoraphobia (PD/A), obsessive–compulsive disorder (OCD), posttraumatic stress disorder (PTSD), and social anxiety disorder (SAD) offered to the international public via Anxiety Online, an open-access full-service virtual psychology clinic for anxiety disorders. Methods We used a naturalistic participant choice, quasi-experimental design to evaluate each of the five Anxiety Online fully automated self-help e-therapy programs. Participants were required to have at least subclinical levels of one of the anxiety disorders to be offered the associated disorder-specific fully automated self-help e-therapy program. These programs are offered free of charge via Anxiety Online. Results A total of 225 people self-selected one of the five e-therapy programs (GAD, n = 88; SAD, n = 50; PD/A, n = 40; PTSD, n = 30; OCD, n = 17) and completed their 12-week posttreatment assessment. Significant improvements were found on 21/25 measures across the five fully automated self-help programs. At postassessment we observed significant reductions on all five anxiety disorder clinical disorder severity ratings (Cohen d range 0.72–1.22), increased confidence in managing one’s own mental health care (Cohen d range 0.70–1.17), and decreases in the total number of clinical diagnoses (except for the PD/A program, where a positive trend was found) (Cohen d range 0.45–1.08). In addition, we found significant improvements in quality of life for the GAD, OCD, PTSD, and SAD e-therapy programs (Cohen d range 0.11–0.96) and significant reductions relating to general psychological distress levels for the GAD, PD/A, and PTSD e-therapy programs (Cohen d range 0.23–1.16). Overall, treatment satisfaction was good across all five e-therapy programs, and posttreatment assessment completers reported using their e-therapy program an average of 395.60 (SD 272.2) minutes over the 12-week treatment period. Conclusions Overall, all five fully automated self-help e-therapy programs appear to be delivering promising high-quality outcomes; however, the results require replication. Trial Registration Australian and New Zealand Clinical Trials Registry ACTRN121611000704998; http://www.anzctr.org.au/trial_view.aspx?ID=336143 (Archived by WebCite at http://www.webcitation.org/618r3wvOG) PMID:22057287

  10. 33. Three bolts on railing outside control house on north ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. Three bolts on railing outside control house on north tower, one bolt on first handrail post of the north span (bridge is in the open position). As the bridge opens or closes the single bolt on the handrail post moves past the three stationary bolts. This system is used by the bridge operator to judge speed and position of the north span as it opens or closes. Based on these bolts movement of the north span is speeded up or slowed down and the brakes applied during the opening and closing process. View facing east. - Henry Ford Bridge, Spanning Cerritos Channel, Los Angeles-Long Beach Harbor, Los Angeles, Los Angeles County, CA

  11. 33 CFR 117.903 - Darby Creek.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... stopping. (3) From April 1 through October 31, the draw shall be left in the open position at all times and... Delair Railroad Bridge in Delair, New Jersey. (5) Before the bridge closes for any reason, an on-site... be left in the full open position at all times. [CGD05-01-052, 67 FR 64170, Feb. 11, 2002, as amended...

  12. 33 CFR 117.903 - Darby Creek.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... stopping. (3) From April 1 through October 31, the draw shall be left in the open position at all times and... Delair Railroad Bridge in Delair, New Jersey. (5) Before the bridge closes for any reason, an on-site... be left in the full open position at all times. [CGD05-01-052, 67 FR 64170, Feb. 11, 2002, as amended...

  13. Vacuum tool manipulator

    DOEpatents

    Zollinger, W.T.

    1993-11-23

    Apparatus for manipulating a vacuum hose in a reactor vessel comprises a housing with two opposing openings, an arm carried by the housing and deployable from a stowed position essentially completely within the housing to an extended position where the arm extends through the two openings in a generally horizontal position. The arm preferably has a two-fingered gripping device for gripping the vacuum hose but may carry a different end effector such as a grinding wheel. The fingers are opened and closed by one air cylinder. A second air cylinder extends the device. A third air cylinder within the housing pivotally pulls the opposing end of the arm into the housing via a pivoting member pivotally connected between the third air cylinder shaft and the arm. 6 figures.

  14. Multiple pass gas absorption cell utilizing a spherical mirror opposite one or more pair of obliquely disposed flat mirrors

    NASA Technical Reports Server (NTRS)

    Pearson, Richard (Inventor); Lynch, Dana H. (Inventor); Gunter, William D. (Inventor)

    1995-01-01

    A method and apparatus for passing light bundles through a multiple pass sampling cell is disclosed. The multiple pass sampling cell includes a sampling chamber having first and second ends positioned along a longitudinal axis of the sampling cell. The sampling cell further includes an entrance opening, located adjacent the first end of the sampling cell at a first azimuthal angular position. The entrance opening permits a light bundle to pass into the sampling cell. The sampling cell also includes an exit opening at a second azimuthal angular position. The light exit permits a light bundle to pass out of the sampling cell after the light bundle has followed a predetermined path.

  15. Vacuum tool manipulator

    DOEpatents

    Zollinger, William T.

    1993-01-01

    Apparatus for manipulating a vacuum hose in a reactor vessel comprises a housing with two opposing openings, an arm carried by the housing and deployable from a stowed position essentially completely within the housing to an extended position where the arm extends through the two openings in a generally horizontal position. The arm preferably has a two-fingered gripping device for gripping the vacuum hose but may carry a different end effector such as a grinding wheel. The fingers are opened and closed by one air cylinder. A second air cylinder extends the device. A third air cylinder within the housing pivotally pulls the opposing end of the arm into the housing via a pivoting member pivotally connected between the third air cylinder shaft and the arm.

  16. Robust Criterion for the Existence of Nonhyperbolic Ergodic Measures

    NASA Astrophysics Data System (ADS)

    Bochi, Jairo; Bonatti, Christian; Díaz, Lorenzo J.

    2016-06-01

    We give explicit C 1-open conditions that ensure that a diffeomorphism possesses a nonhyperbolic ergodic measure with positive entropy. Actually, our criterion provides the existence of a partially hyperbolic compact set with one-dimensional center and positive topological entropy on which the center Lyapunov exponent vanishes uniformly. The conditions of the criterion are met on a C 1-dense and open subset of the set of diffeomorphisms having a robust cycle. As a corollary, there exists a C 1-open and dense subset of the set of non-Anosov robustly transitive diffeomorphisms consisting of systems with nonhyperbolic ergodic measures with positive entropy. The criterion is based on a notion of a blender defined dynamically in terms of strict invariance of a family of discs.

  17. Handling apparatus

    DOEpatents

    Cody, John P.; Kane, James J.

    1976-01-01

    1. A device of the character described comprising the combination of a guide tube having a normally open end, a support frame having a port therethrough, linkage means pivotally connected with the tube and with the frame and rotatably supporting the tube for movement between a position in longitudinal alignment with said port and with its open end in registry with the port and an additional position in which the tube lies adjacent the port with a side portion of the tube extending generally transversely across said port, an elongated track carried by said frame disposed generally parallel to and adjacent the tube in its said additional position, means connected with and projecting laterally from said tube adjacent its open end engaging and movable along said elongated track for cooperating with the track to direct the tube during movement between said positions, and means carried by the tube for moving an article therethrough toward and away from said port.

  18. Influence of the Oxygen Electrode Open Ratio and Electrolyte Evaporation on the Performance of Li-O2 Batteries.

    PubMed

    Mohazabrad, Farhad; Wang, Fangzhou; Li, Xianglin

    2017-05-10

    This study experimentally investigates and numerically simulates the influence of the cathode electrode open ratio (ratio of oxygen-opening area to the total electrode surface area) on the performance of Li-O 2 batteries at various discharge current densities. At the current density of 0.1 mA/cm 2 , the maximum discharge capacity is achieved at 25% open ratio among the tested open ratios (0-100%). As the open ratio increases from 25% to 100%, the specific discharge capacity decreases from 995 to 397 mA h/g carbon . A similar trend is observed at 0.3 mA/cm 2 , while the maximum discharge capacity is obtained at 3% open ratio among the tested open ratios. The model that assumes the electrode is always fully saturated by the electrolyte does not obtain similar trends with experimental results, while the model that considers electrolyte loss by evaporation and the volume change of the solid obtains the same trend with experimental observations. The open ratio governs not only availability of oxygen but also the evaporation of the electrolyte and the contact resistance. The faster evaporation of the electrolyte at a higher open ratio can be the main reason for the decrease of the discharge capacity, especially when the open ratio is relatively high (above 25%). Meanwhile, the contact resistance of the battery, measured by the electrochemical impedance spectroscopy (EIS), increases from 3.97 to 7.02 Ω when the open ratio increased from 3% to 95%. The increase of the Ohmic overpotential, however, is negligible (on the order of millivolts) because of the low discharge and charge current rates (on the order of 0.1 mA).

  19. Bistable Microvalve For Use With Microcatheter System

    DOEpatents

    Seward, Kirk Patrick

    2003-12-16

    A bistable microvalve of shape memory material is operatively connected to a microcatheter. The bistable microvalve includes a tip that can be closed off until it is in the desired position. Once it is in position it can be opened and closed. The system uses heat and pressure to open and close the microvalve. The shape memory material will change stiffness and shape when heated above a transition temperature. The shape memory material is adapted to move from a first shape to a second shape, either open or closed, where it can perform a desired function.

  20. Bistable microvalve and microcatheter system

    DOEpatents

    Seward, Kirk Patrick

    2003-05-20

    A bistable microvalve of shape memory material is operatively connected to a microcatheter. The bistable microvalve includes a tip that can be closed off until it is in the desired position. Once it is in position it can opened and closed. The system uses heat and pressure to open and close the microvalve. The shape memory material will change stiffness and shape when heated above a transition temperature. The shape memory material is adapted to move from a first shape to a second shape, either open or closed, where it can perform a desired function.

Top