A Functional Model of Quality Assurance for Psychiatric Hospitals and Corresponding Staffing Requirements.

ERIC Educational Resources Information Center

Kamis-Gould, Edna; And Others

1991-01-01

A model for quality assurance (QA) in psychiatric hospitals is described. Its functions (general QA, utilization review, clinical records, evaluation, management information systems, risk management, and infection control), subfunctions, and corresponding staffing requirements are reviewed. This model was designed to foster standardization in QA…

Feeding, evaluating, and controlling rumen function.

PubMed

Lean, Ian J; Golder, Helen M; Hall, Mary Beth

2014-11-01

Achieving optimal rumen function requires an understanding of feeds and systems of nutritional evaluation. Key influences on optimal function include achieving good dry matter intake. The function of feeds in the rumen depends on other factors including chemical composition, rate of passage, degradation rate of the feed, availability of other substrates and cofactors, and individual animal variation. This article discusses carbohydrate, protein, and fat metabolism in the rumen, and provides practical means of evaluation of rations in the field. Conditions under which rumen function is suboptimal (ie, acidosis and bloat) are discussed, and methods for control examined. Copyright © 2014 Elsevier Inc. All rights reserved.

Water quality assessment of the Li Canal using a functional fuzzy synthetic evaluation model.

PubMed

Feng, Yan; Ling, Liu

2014-07-01

Through introducing functional data analysis (FDA) theory into the conventional fuzzy synthetic evaluation (FSE) method, the functional fuzzy synthetic evaluation (FFSE) model is established. FFSE keeps the property of the conventional FSE that the fuzziness in the water quality condition can be suitably measured. Furthermore, compared with FSE, FFSE has the following advantages: (1) FFSE requires fewer conditions for observation, for example, pollutants can be monitored at different times, and missing data is accepted; (2) the dynamic variation of the water quality condition can be represented more comprehensively and intuitively. The procedure of FFSE is discussed and the water quality of the Li Canal in 2012 is evaluated as an illustration. The synthetic classification of the Li Canal is "II" in January, February and July, and "I" in other months, which can satisfy the requirement of the Chinese South-to-North Water Diversion Project.

Multi-level Expression Design Language: Requirement level (MEDL-R) system evaluation

NASA Technical Reports Server (NTRS)

1980-01-01

An evaluation of the Multi-Level Expression Design Language Requirements Level (MEDL-R) system was conducted to determine whether it would be of use in the Goddard Space Flight Center Code 580 software development environment. The evaluation is based upon a study of the MEDL-R concept of requirement languages, the functions performed by MEDL-R, and the MEDL-R language syntax. Recommendations are made for changes to MEDL-R that would make it useful in the Code 580 environment.

Scenario-Based Assessment of User Needs for Point-of-Care Robots.

PubMed

Lee, Hyeong Suk; Kim, Jeongeun

2018-01-01

This study aimed to derive specific user requirements and barriers in a real medical environment to define the essential elements and functions of two types of point-of-care (POC) robot: a telepresence robot as a tool for teleconsultation, and a bedside robot to provide emotional care for patients. An analysis of user requirements was conducted; user needs were gathered and identified, and detailed, realistic scenarios were created. The prototype robots were demonstrated in physical environments for envisioning and evaluation. In all, three nurses and three clinicians participated as evaluators to observe the demonstrations and evaluate the robot systems. The evaluators were given a brief explanation of each scene and the robots' functionality. Four major functions of the teleconsultation robot were defined and tested in the demonstration. In addition, four major functions of the bedside robot were evaluated. Among the desired functions for a teleconsultation robot, medical information delivery and communication had high priority. For a bedside robot, patient support, patient monitoring, and healthcare provider support were the desired functions. The evaluators reported that the teleconsultation robot can increase support from and access to specialists and resources. They mentioned that the bedside robot can improve the quality of hospital life. Problems identified in the demonstration were those of space conflict, communication errors, and safety issues. Incorporating this technology into healthcare services will enhance communication and teamwork skills across distances and thereby facilitate teamwork. However, repeated tests will be needed to evaluate and ensure improved performance.

Scenario-Based Assessment of User Needs for Point-of-Care Robots

PubMed Central

Lee, Hyeong Suk

2018-01-01

Objectives This study aimed to derive specific user requirements and barriers in a real medical environment to define the essential elements and functions of two types of point-of-care (POC) robot: a telepresence robot as a tool for teleconsultation, and a bedside robot to provide emotional care for patients. Methods An analysis of user requirements was conducted; user needs were gathered and identified, and detailed, realistic scenarios were created. The prototype robots were demonstrated in physical environments for envisioning and evaluation. In all, three nurses and three clinicians participated as evaluators to observe the demonstrations and evaluate the robot systems. The evaluators were given a brief explanation of each scene and the robots' functionality. Four major functions of the teleconsultation robot were defined and tested in the demonstration. In addition, four major functions of the bedside robot were evaluated. Results Among the desired functions for a teleconsultation robot, medical information delivery and communication had high priority. For a bedside robot, patient support, patient monitoring, and healthcare provider support were the desired functions. The evaluators reported that the teleconsultation robot can increase support from and access to specialists and resources. They mentioned that the bedside robot can improve the quality of hospital life. Problems identified in the demonstration were those of space conflict, communication errors, and safety issues. Conclusions Incorporating this technology into healthcare services will enhance communication and teamwork skills across distances and thereby facilitate teamwork. However, repeated tests will be needed to evaluate and ensure improved performance. PMID:29503748

38 CFR 4.96 - Special provisions regarding evaluation of respiratory conditions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... purposes except when the results of pre-bronchodilator pulmonary function tests are normal or when the... schedule unless the post-bronchodilator results were poorer than the pre-bronchodilator results. In those...-6845. (1) Pulmonary function tests (PFT's) are required to evaluate these conditions except: (i) When...

38 CFR 4.96 - Special provisions regarding evaluation of respiratory conditions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... purposes except when the results of pre-bronchodilator pulmonary function tests are normal or when the... schedule unless the post-bronchodilator results were poorer than the pre-bronchodilator results. In those...-6845. (1) Pulmonary function tests (PFT's) are required to evaluate these conditions except: (i) When...

38 CFR 4.96 - Special provisions regarding evaluation of respiratory conditions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... purposes except when the results of pre-bronchodilator pulmonary function tests are normal or when the... schedule unless the post-bronchodilator results were poorer than the pre-bronchodilator results. In those...-6845. (1) Pulmonary function tests (PFT's) are required to evaluate these conditions except: (i) When...

38 CFR 4.96 - Special provisions regarding evaluation of respiratory conditions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... purposes except when the results of pre-bronchodilator pulmonary function tests are normal or when the... schedule unless the post-bronchodilator results were poorer than the pre-bronchodilator results. In those...-6845. (1) Pulmonary function tests (PFT's) are required to evaluate these conditions except: (i) When...

Requirements Modeling with the Aspect-oriented User Requirements Notation (AoURN): A Case Study

NASA Astrophysics Data System (ADS)

Mussbacher, Gunter; Amyot, Daniel; Araújo, João; Moreira, Ana

The User Requirements Notation (URN) is a recent ITU-T standard that supports requirements engineering activities. The Aspect-oriented URN (AoURN) adds aspect-oriented concepts to URN, creating a unified framework that allows for scenario-based, goal-oriented, and aspect-oriented modeling. AoURN is applied to the car crash crisis management system (CCCMS), modeling its functional and non-functional requirements (NFRs). AoURN generally models all use cases, NFRs, and stakeholders as individual concerns and provides general guidelines for concern identification. AoURN handles interactions between concerns, capturing their dependencies and conflicts as well as the resolutions. We present a qualitative comparison of aspect-oriented techniques for scenario-based and goal-oriented requirements engineering. An evaluation carried out based on the metrics adapted from literature and a task-based evaluation suggest that AoURN models are more scalable than URN models and exhibit better modularity, reusability, and maintainability.

Child Development Functionality Assessment Guide: Standards and Requirements for Developing Most Efficient Organizations.

ERIC Educational Resources Information Center

Department of the Army, Washington, DC.

As part of its cost containment efforts, the U.S. Navy continues to evaluate its child development program to expand availability without compromising the high quality standards required by the 1989 Military Child Care Act. This manual provides guidelines for conducting Functionality Assessments (FA) and delineates the standards and requirements…

42 CFR 421.201 - Performance criteria and standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... funds. (2) The standards evaluate the specific requirements of each functional responsibility or... performance of functional responsibilities such as— (i) Accurate and timely payment determinations; (ii...

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 9: Functional requirements

NASA Technical Reports Server (NTRS)

1980-01-01

The current system and subsystem used by the Identification Division are described. System constraints that dictate the system environment are discussed and boundaries within which solutions must be found are described. The functional requirements were related to the performance requirements. These performance requirements were then related to their applicable subsystems. The flow of data, documents, or other pieces of information from one subsystem to another or from the external world into the identification system is described. Requirements and design standards for a computer based system are presented.

Evaluating Motor and Perceptual-Motor Development: Evaluating the Psychomotor Functioning of Infants and Young Children.

ERIC Educational Resources Information Center

Cooper, Walter E.

The author considers the importance of evaluating preschoolers' perceptual motor development, the usefulness of various evaluation techniques, and the specific psychomotor abilities that require evaluation. He quotes researchers to underline the difficulty of choosing appropriate evaluative techniques and to stress the importance of taking…

Software Dependability and Safety Evaluations ESA's Initiative

NASA Astrophysics Data System (ADS)

Hernek, M.

ESA has allocated funds for an initiative to evaluate Dependability and Safety methods of Software. The objectives of this initiative are; · More extensive validation of Safety and Dependability techniques for Software · Provide valuable results to improve the quality of the Software thus promoting the application of Dependability and Safety methods and techniques. ESA space systems are being developed according to defined PA requirement specifications. These requirements may be implemented through various design concepts, e.g. redundancy, diversity etc. varying from project to project. Analysis methods (FMECA. FTA, HA, etc) are frequently used during requirements analysis and design activities to assure the correct implementation of system PA requirements. The criticality level of failures, functions and systems is determined and by doing that the critical sub-systems are identified, on which dependability and safety techniques are to be applied during development. Proper performance of the software development requires the development of a technical specification for the products at the beginning of the life cycle. Such technical specification comprises both functional and non-functional requirements. These non-functional requirements address characteristics of the product such as quality, dependability, safety and maintainability. Software in space systems is more and more used in critical functions. Also the trend towards more frequent use of COTS and reusable components pose new difficulties in terms of assuring reliable and safe systems. Because of this, its dependability and safety must be carefully analysed. ESA identified and documented techniques, methods and procedures to ensure that software dependability and safety requirements are specified and taken into account during the design and development of a software system and to verify/validate that the implemented software systems comply with these requirements [R1].

Evaluating the Evidence Surrounding Pontine Cholinergic Involvement in REM Sleep Generation

PubMed Central

Grace, Kevin P.; Horner, Richard L.

2015-01-01

Rapid eye movement (REM) sleep – characterized by vivid dreaming, motor paralysis, and heightened neural activity – is one of the fundamental states of the mammalian central nervous system. Initial theories of REM sleep generation posited that induction of the state required activation of the “pontine REM sleep generator” by cholinergic inputs. Here, we review and evaluate the evidence surrounding cholinergic involvement in REM sleep generation. We submit that: (i) the capacity of pontine cholinergic neurotransmission to generate REM sleep has been firmly established by gain-of-function experiments, (ii) the function of endogenous cholinergic input to REM sleep generating sites cannot be determined by gain-of-function experiments; rather, loss-of-function studies are required, (iii) loss-of-function studies show that endogenous cholinergic input to the PTF is not required for REM sleep generation, and (iv) cholinergic input to the pontine REM sleep generating sites serve an accessory role in REM sleep generation: reinforcing non-REM-to-REM sleep transitions making them quicker and less likely to fail. PMID:26388832

Evaluation of Absolute and Relative Reinforcer Value Using Progressive-Ratio Schedules

PubMed Central

Francisco, Monica T; Borrero, John C; Sy, Jolene R

2008-01-01

We evaluated behavior exhibited by individuals with developmental disabilities using progressive-ratio (PR) schedules. High- and low-preference stimuli were determined based on the results of a paired-stimulus preference assessment and were evaluated in subsequent reinforcer and PR assessments using concurrent and single schedules of presentation. In Experiment 1, results showed that for 2 of 3 participants, stimuli determined to be low-preference functioned as reinforcers when evaluated independent of high-preference stimuli. Further, the results from Experiment 2 showed that low-preference stimuli also functioned as reinforcers under gradually increasing PR requirements. Results suggest that for cases in which a high-preference stimulus is unavailable or impractical, the contingent delivery of relatively less preferred stimuli may maintain appropriate behavior, even as schedule requirements increase. PMID:18595283

Roles for Educational Psychologists in Pharmaceutical Education.

ERIC Educational Resources Information Center

Speedie, Stuart M.

Functions of educational specialists, including educational psychologists, in the field of pharmaceutical education are discussed. The functions considered range from a general educational consultant to evaluator of an innovative program. Requirements for functioning effectively within a pharmacy school are also examined. The compensation…

On-board multispectral classification study

NASA Technical Reports Server (NTRS)

Ewalt, D.

1979-01-01

The factors relating to onboard multispectral classification were investigated. The functions implemented in ground-based processing systems for current Earth observation sensors were reviewed. The Multispectral Scanner, Thematic Mapper, Return Beam Vidicon, and Heat Capacity Mapper were studied. The concept of classification was reviewed and extended from the ground-based image processing functions to an onboard system capable of multispectral classification. Eight different onboard configurations, each with varying amounts of ground-spacecraft interaction, were evaluated. Each configuration was evaluated in terms of turnaround time, onboard processing and storage requirements, geometric and classification accuracy, onboard complexity, and ancillary data required from the ground.

On-board Attitude Determination System (OADS). [for advanced spacecraft missions

NASA Technical Reports Server (NTRS)

Carney, P.; Milillo, M.; Tate, V.; Wilson, J.; Yong, K.

1978-01-01

The requirements, capabilities and system design for an on-board attitude determination system (OADS) to be flown on advanced spacecraft missions were determined. Based upon the OADS requirements and system performance evaluation, a preliminary on-board attitude determination system is proposed. The proposed OADS system consists of one NASA Standard IRU (DRIRU-2) as the primary attitude determination sensor, two improved NASA Standard star tracker (SST) for periodic update of attitude information, a GPS receiver to provide on-board space vehicle position and velocity vector information, and a multiple microcomputer system for data processing and attitude determination functions. The functional block diagram of the proposed OADS system is shown. The computational requirements are evaluated based upon this proposed OADS system.

Development of an expert system prototype for determining software functional requirements for command management activities at NASA Goddard

NASA Technical Reports Server (NTRS)

Liebowitz, J.

1985-01-01

The development of an expert system prototype for determining software functional requirements for NASA Goddard's Command Management System (CMS) is described. The role of the CMS is to transform general requests into specific spacecraft commands with command execution conditions. The CMS is part of the NASA Data System which entails the downlink of science and engineering data from NASA near-earth satellites to the user, and the uplink of command and control data to the spacecraft. Subjects covered include: the problem environment of determining CMS software functional requirements; the expert system approach for handling CMS requirements development; validation and evaluation procedures for the expert system.

Space Suit Portable Life Support System (PLSS) 2.0 Pre-Installation Acceptance (PIA) Testing

NASA Technical Reports Server (NTRS)

Anchondo, Ian; Cox, Marlon; Meginnis, Carly; Westheimer, David; Vogel, Matt R.

2016-01-01

Following successful completion of the space suit Portable Life Support System (PLSS) 1.0 development and testing in 2011, the second system-level prototype, PLSS 2.0, was developed in 2012 to continue the maturation of the advanced PLSS design. This advanced PLSS is intended to reduce consumables, improve reliability and robustness, and incorporate additional sensing and functional capabilities over the current Space Shuttle/International Space Station Extravehicular Mobility Unit (EMU) PLSS. PLSS 2.0 represents the first attempt at a packaged design comprising first generation or later component prototypes and medium fidelity interfaces within a flight-like representative volume. Pre-Installation Acceptance (PIA) is carryover terminology from the Space Shuttle Program referring to the series of test sequences used to verify functionality of the EMU PLSS prior to installation into the Space Shuttle airlock for launch. As applied to the PLSS 2.0 development and testing effort, PIA testing designated the series of 27 independent test sequences devised to verify component and subsystem functionality, perform in situ instrument calibrations, generate mapping data, define set-points, evaluate control algorithms, evaluate hardware performance against advanced PLSS design requirements, and provide quantitative and qualitative feedback on evolving design requirements and performance specifications. PLSS 2.0 PIA testing was carried out in 2013 and 2014 using a variety of test configurations to perform test sequences that ranged from stand-alone component testing to system-level testing, with evaluations becoming increasingly integrated as the test series progressed. Each of the 27 test sequences was vetted independently, with verification of basic functionality required before completion. Because PLSS 2.0 design requirements were evolving concurrently with PLSS 2.0 PIA testing, the requirements were used as guidelines to assess performance during the tests; after the completion of PIA testing, test data served to improve the fidelity and maturity of design requirements as well as plans for future advanced PLSS functional testing.

An Approach for Integrating the Prioritization of Functional and Nonfunctional Requirements

PubMed Central

Dabbagh, Mohammad; Lee, Sai Peck

2014-01-01

Due to the budgetary deadlines and time to market constraints, it is essential to prioritize software requirements. The outcome of requirements prioritization is an ordering of requirements which need to be considered first during the software development process. To achieve a high quality software system, both functional and nonfunctional requirements must be taken into consideration during the prioritization process. Although several requirements prioritization methods have been proposed so far, no particular method or approach is presented to consider both functional and nonfunctional requirements during the prioritization stage. In this paper, we propose an approach which aims to integrate the process of prioritizing functional and nonfunctional requirements. The outcome of applying the proposed approach produces two separate prioritized lists of functional and non-functional requirements. The effectiveness of the proposed approach has been evaluated through an empirical experiment aimed at comparing the approach with the two state-of-the-art-based approaches, analytic hierarchy process (AHP) and hybrid assessment method (HAM). Results show that our proposed approach outperforms AHP and HAM in terms of actual time-consumption while preserving the quality of the results obtained by our proposed approach at a high level of agreement in comparison with the results produced by the other two approaches. PMID:24982987

An approach for integrating the prioritization of functional and nonfunctional requirements.

PubMed

Dabbagh, Mohammad; Lee, Sai Peck

2014-01-01

Due to the budgetary deadlines and time to market constraints, it is essential to prioritize software requirements. The outcome of requirements prioritization is an ordering of requirements which need to be considered first during the software development process. To achieve a high quality software system, both functional and nonfunctional requirements must be taken into consideration during the prioritization process. Although several requirements prioritization methods have been proposed so far, no particular method or approach is presented to consider both functional and nonfunctional requirements during the prioritization stage. In this paper, we propose an approach which aims to integrate the process of prioritizing functional and nonfunctional requirements. The outcome of applying the proposed approach produces two separate prioritized lists of functional and non-functional requirements. The effectiveness of the proposed approach has been evaluated through an empirical experiment aimed at comparing the approach with the two state-of-the-art-based approaches, analytic hierarchy process (AHP) and hybrid assessment method (HAM). Results show that our proposed approach outperforms AHP and HAM in terms of actual time-consumption while preserving the quality of the results obtained by our proposed approach at a high level of agreement in comparison with the results produced by the other two approaches.

Analytical evaluation of ILM sensors

NASA Technical Reports Server (NTRS)

Kirk, R. J.; Johnson, C. E.; Doty, D.

1975-01-01

Functional requirements and operating environment constraints for an Independent Landing Monitor for aircraft landings in Cat. 2/3 weather conditions are identified and translated into specific sensing requirements. State-of-the-art capabilities of radar, TV, FLIR, multilateration, microwave radiometry, interferometry, redundant MLS and nuclear sensing concepts are evaluated and compared to the requirements. Concepts showing the best ILM potential are identified elsewhere in this series. Three specific concepts are identified: bistatic radar, complex interferometry, and circular synthetic aperture.

On the Fast Evaluation Method of Temperature and Gas Mixing Ratio Weighting Functions for Remote Sensing of Planetary Atmospheres in Thermal IR and Microwave

NASA Technical Reports Server (NTRS)

Ustinov, E. A.

1999-01-01

Evaluation of weighting functions in the atmospheric remote sensing is usually the most computer-intensive part of the inversion algorithms. We present an analytic approach to computations of temperature and mixing ratio weighting functions that is based on our previous results but the resulting expressions use the intermediate variables that are generated in computations of observable radiances themselves. Upwelling radiances at the given level in the atmosphere and atmospheric transmittances from space to the given level are combined with local values of the total absorption coefficient and its components due to absorption of atmospheric constituents under study. This makes it possible to evaluate the temperature and mixing ratio weighting functions in parallel with evaluation of radiances. This substantially decreases the computer time required for evaluation of weighting functions. Implications for the nadir and limb viewing geometries are discussed.

Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 1: Mission and system requirements

NASA Technical Reports Server (NTRS)

Kofal, Allen E.

1987-01-01

The mission and system requirements for the concept definition and system analysis of the Orbital Transfer Vehicle (OTV) are established. The requirements set forth constitute the single authority for the selection, evaluation, and optimization of the technical performance and design of the OTV. This requirements document forms the basis for the Ground and Space Based OTV concept definition analyses and establishes the physical, functional, performance and design relationships to STS, Space Station, Orbital Maneuvering Vehicle (OMV), and payloads.

20 CFR 220.101 - Evaluation of mental impairments.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Board will then do a residual functional capacity assessment for those claimants (employees, widow(er)s... record pertinent findings and rate the degree of functional loss. (1) This procedure requires the Board to record the pertinent signs, symptoms, findings, functional limitations, and effects of treatment...

46 CFR 62.50-20 - Additional requirements for minimally attended machinery plants.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) MARINE ENGINEERING VITAL SYSTEM AUTOMATION Automated Self-propelled Vessel Manning § 62.50-20 Additional... program must be functioning prior to the completion of the evaluation period for reduced manning required...

46 CFR 62.50-20 - Additional requirements for minimally attended machinery plants.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) MARINE ENGINEERING VITAL SYSTEM AUTOMATION Automated Self-propelled Vessel Manning § 62.50-20 Additional... program must be functioning prior to the completion of the evaluation period for reduced manning required...

46 CFR 62.50-20 - Additional requirements for minimally attended machinery plants.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) MARINE ENGINEERING VITAL SYSTEM AUTOMATION Automated Self-propelled Vessel Manning § 62.50-20 Additional... program must be functioning prior to the completion of the evaluation period for reduced manning required...

46 CFR 62.50-20 - Additional requirements for minimally attended machinery plants.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) MARINE ENGINEERING VITAL SYSTEM AUTOMATION Automated Self-propelled Vessel Manning § 62.50-20 Additional... program must be functioning prior to the completion of the evaluation period for reduced manning required...

The Global Emergency Observation and Warning System

NASA Technical Reports Server (NTRS)

Bukley, Angelia P.; Mulqueen, John A.

1994-01-01

Based on an extensive characterization of natural hazards, and an evaluation of their impacts on humanity, a set of functional technical requirements for a global warning and relief system was developed. Since no technological breakthroughs are required to implement a global system capable of performing the functions required to provide sufficient information for prevention, preparedness, warning, and relief from natural disaster effects, a system is proposed which would combine the elements of remote sensing, data processing, information distribution, and communications support on a global scale for disaster mitigation.

Neonatal peripheral facial paralysis' evaluation with photogrammetry: A case report.

PubMed

da Fonseca Filho, Gentil Gomes; de Medeiros Cirne, Gabriele Natane; Cacho, Roberta Oliveira; de Souza, Jane Carla; Nagem, Danilo; Cacho, Enio Walker Azevedo; Moran, Cristiane Aparecida; Abreu, Bruna; Pereira, Silvana Alves

2015-12-01

Facial paralysis in newborns can leave functional sequelae. Determining the evolution and amount of functional losses requires consistent evaluation methods that measure, quantitatively, the evolution of clinical functionality. This paper reports an innovative method of facial assessment for the case of a child 28 days of age with unilateral facial paralysis. The child had difficulty breast feeding, and quickly responded to the physical therapy treatment. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

User Experience Evaluation Methods in Product Development (UXEM'09)

NASA Astrophysics Data System (ADS)

Roto, Virpi; Väänänen-Vainio-Mattila, Kaisa; Law, Effie; Vermeeren, Arnold

High quality user experience (UX) has become a central competitive factor of product development in mature consumer markets [1]. Although the term UX originated from industry and is a widely used term also in academia, the tools for managing UX in product development are still inadequate. A prerequisite for designing delightful UX in an industrial setting is to understand both the requirements tied to the pragmatic level of functionality and interaction and the requirements pertaining to the hedonic level of personal human needs, which motivate product use [2]. Understanding these requirements helps managers set UX targets for product development. The next phase in a good user-centered design process is to iteratively design and evaluate prototypes [3]. Evaluation is critical for systematically improving UX. In many approaches to UX, evaluation basically needs to be postponed until the product is fully or at least almost fully functional. However, in an industrial setting, it is very expensive to find the UX failures only at this phase of product development. Thus, product development managers and developers have a strong need to conduct UX evaluation as early as possible, well before all the parts affecting the holistic experience are available. Different types of products require evaluation on different granularity and maturity levels of a prototype. For example, due to its multi-user characteristic, a community service or an enterprise resource planning system requires a broader scope of UX evaluation than a microwave oven or a word processor that is meant for a single user at a time. Before systematic UX evaluation can be taken into practice, practical, lightweight UX evaluation methods suitable for different types of products and different phases of product readiness are needed. A considerable amount of UX research is still about the conceptual frameworks and models for user experience [4]. Besides, applying existing usability evaluation methods (UEMs) without adaptation to evaluate UX may lead to some scoping issues. Consequently, there is a strong need to put UX evaluation from research into practice.

Trade-Off Analysis between Concerns Based on Aspect-Oriented Requirements Engineering

NASA Astrophysics Data System (ADS)

Laurito, Abelyn Methanie R.; Takada, Shingo

The identification of functional and non-functional concerns is an important activity during requirements analysis. However, there may be conflicts between the identified concerns, and they must be discovered and resolved through trade-off analysis. Aspect-Oriented Requirements Engineering (AORE) has trade-off analysis as one of its goals, but most AORE approaches do not actually offer support for trade-off analysis; they focus on describing concerns and generating their composition. This paper proposes an approach for trade-off analysis based on AORE using use cases and the Requirements Conflict Matrix (RCM) to represent compositions. RCM shows the positive or negative effect of non-functional concerns over use cases and other non-functional concerns. Our approach is implemented within a tool called E-UCEd (Extended Use Case Editor). We also show the results of evaluating our tool.

Functional Foods Baseline and Requirements Analysis

NASA Technical Reports Server (NTRS)

Cooper, M. R.; Bermudez-Aguirre, L. D.; Douglas, G.

2015-01-01

Current spaceflight foods were evaluated to determine if their nutrient profile supports positioning as a functional food and if the stability of the bioactive compound within the food matrix over an extended shelf-life correlated with the expected storage duration during the mission. Specifically, the research aims were: Aim A. To determine the amount of each nutrient in representative spaceflight foods immediately after processing and at predetermined storage time to establish the current nutritional state. Aim B. To identify the requirements to develop foods that stabilize these nutrients such that required concentrations are maintained in the space food system throughout long duration missions (up to five years). Aim C. To coordinate collaborations with health and performance groups that may require functional foods as a countermeasure.

General purpose free floating platform for KC-135 flight experimentation

NASA Technical Reports Server (NTRS)

Borchers, Bruce A.; Yendler, Boris S.; Kliss, Mark H.; Gonzales, Andrew A.; Edwards, Mark T.

1994-01-01

The Controlled Ecological Life Support Systems (CELSS) program is evaluating higher plants as a means of providing life support functions aboard space craft. These plant systems will be capable of regenerating air and water while meeting some of the food requirements of the crew. In order to grow plants in space, a series of systems are required to provide the necessary plant support functions. Some of the systems required for CELSS experiments are such that is is likely that existing technologies will require refinement, or novel technologies will need to be developed. To evaluate and test these technologies, a series of KC-135 precursor flights are being proposed. A general purpose free floating experiment platform is being developed to allow the KC-135 flights to be used to their fullest. This paper will outline the basic design for the CELSS Free Floating Test Bed (FFTB), and the requirements for the individual subsystems. Several preliminary experiments suitable for the free floater will also be discussed.

Quantum mechanics over sets

NASA Astrophysics Data System (ADS)

Ellerman, David

2014-03-01

In models of QM over finite fields (e.g., Schumacher's ``modal quantum theory'' MQT), one finite field stands out, Z2, since Z2 vectors represent sets. QM (finite-dimensional) mathematics can be transported to sets resulting in quantum mechanics over sets or QM/sets. This gives a full probability calculus (unlike MQT with only zero-one modalities) that leads to a fulsome theory of QM/sets including ``logical'' models of the double-slit experiment, Bell's Theorem, QIT, and QC. In QC over Z2 (where gates are non-singular matrices as in MQT), a simple quantum algorithm (one gate plus one function evaluation) solves the Parity SAT problem (finding the parity of the sum of all values of an n-ary Boolean function). Classically, the Parity SAT problem requires 2n function evaluations in contrast to the one function evaluation required in the quantum algorithm. This is quantum speedup but with all the calculations over Z2 just like classical computing. This shows definitively that the source of quantum speedup is not in the greater power of computing over the complex numbers, and confirms the idea that the source is in superposition.

Quadrature, Interpolation and Observability

NASA Technical Reports Server (NTRS)

Hodges, Lucille McDaniel

1997-01-01

Methods of interpolation and quadrature have been used for over 300 years. Improvements in the techniques have been made by many, most notably by Gauss, whose technique applied to polynomials is referred to as Gaussian Quadrature. Stieltjes extended Gauss's method to certain non-polynomial functions as early as 1884. Conditions that guarantee the existence of quadrature formulas for certain collections of functions were studied by Tchebycheff, and his work was extended by others. Today, a class of functions which satisfies these conditions is called a Tchebycheff System. This thesis contains the definition of a Tchebycheff System, along with the theorems, proofs, and definitions necessary to guarantee the existence of quadrature formulas for such systems. Solutions of discretely observable linear control systems are of particular interest, and observability with respect to a given output function is defined. The output function is written as a linear combination of a collection of orthonormal functions. Orthonormal functions are defined, and their properties are discussed. The technique for evaluating the coefficients in the output function involves evaluating the definite integral of functions which can be shown to form a Tchebycheff system. Therefore, quadrature formulas for these integrals exist, and in many cases are known. The technique given is useful in cases where the method of direct calculation is unstable. The condition number of a matrix is defined and shown to be an indication of the the degree to which perturbations in data affect the accuracy of the solution. In special cases, the number of data points required for direct calculation is the same as the number required by the method presented in this thesis. But the method is shown to require more data points in other cases. A lower bound for the number of data points required is given.

Functional Mobility Testing: A Novel Method to Create Suit Design Requirements

NASA Technical Reports Server (NTRS)

England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar L.

2008-01-01

This study was performed to aide in the creation of design requirements for the next generation of space suits that more accurately describe the level of mobility necessary for a suited crewmember through the use of an innovative methodology utilizing functional mobility. A novel method was utilized involving the collection of kinematic data while 20 subjects (10 male, 10 female) performed pertinent functional tasks that will be required of a suited crewmember during various phases of a lunar mission. These tasks were selected based on relevance and criticality from a larger list of tasks that may be carried out by the crew. Kinematic data was processed through Vicon BodyBuilder software to calculate joint angles for the ankle, knee, hip, torso, shoulder, elbow, and wrist. Maximum functional mobility was consistently lower than maximum isolated mobility. This study suggests that conventional methods for establishing design requirements for human-systems interfaces based on maximal isolated joint capabilities may overestimate the required mobility. Additionally, this method provides a valuable means of evaluating systems created from these requirements by comparing the mobility available in a new spacesuit, or the mobility required to use a new piece of hardware, to this newly established database of functional mobility.

Client Functional Assessment Data as Management Information: Woodrow Wilson Rehabilitation Center's Management Information System

PubMed Central

Steidle, Ernest F.

1983-01-01

This paper describes the design of a functional assessment system, a component of a management information system (MIS) that supports a comprehensive rehabilitation facility. Products of the subsystem document the functional status of rehabilitation clients through process evaluation reporting and outcomes reporting. The purpose of this paper is to describe the design of this MIS component. The environment supported, the integration requirements and the needed development approach is unique, requiring significant input from health care professionals, medical informatics specialists, statisticians and program evaluators. Strategies for the implementation of the functional assessment system are the major results reported in this paper. They are most useful to the systems designer or management engineer in a human service delivery setting. MIS plan development, computer file structure and access methods, and approaches to scheduling applications is described. Finally, the development of functional status measures is discussed. Application of the methodologies described will facilitate similar efforts towards systems development in other human service delivery settings.

Spacelab user implementation assessment study. (Software requirements analysis). Volume 2: Technical report

NASA Technical Reports Server (NTRS)

1976-01-01

The engineering analyses and evaluation studies conducted for the Software Requirements Analysis are discussed. Included are the development of the study data base, synthesis of implementation approaches for software required by both mandatory onboard computer services and command/control functions, and identification and implementation of software for ground processing activities.

Multifunction Data Link for an Advanced Air-Traffic Management System

DOT National Transportation Integrated Search

1972-11-01

This report evaluates the requirements relating to a multi-function data link for an advanced Air Traffic Management System. A two-way time ordered data link is postulated to accomplish the communication and control function. Several candidate modula...

An Evaluation of the Predictive Validity of Confidence Ratings in Identifying Functional Behavioral Assessment Hypothesis Statements

ERIC Educational Resources Information Center

Borgmeier, Chris; Horner, Robert H.

2006-01-01

Faced with limited resources, schools require tools that increase the accuracy and efficiency of functional behavioral assessment. Yarbrough and Carr (2000) provided evidence that informant confidence ratings of the likelihood of problem behavior in specific situations offered a promising tool for predicting the accuracy of function-based…

Technology requirements for communication satellites in the 1980's

NASA Technical Reports Server (NTRS)

Burtt, J. E.; Moe, C. R.; Elms, R. V.; Delateur, L. A.; Sedlacek, W. C.; Younger, G. G.

1973-01-01

The key technology requirements are defined for meeting the forecasted demands for communication satellite services in the 1985 to 1995 time frame. Evaluation is made of needs for services and technical and functional requirements for providing services. The future growth capabilities of the terrestrial telephone network, cable television, and satellite networks are forecasted. The impact of spacecraft technology and booster performance and costs upon communication satellite costs are analyzed. Systems analysis techniques are used to determine functional requirements and the sensitivities of technology improvements for reducing the costs of meeting requirements. Recommended development plans and funding levels are presented, as well as the possible cost saving for communications satellites in the post 1985 era.

Determining Functional Reliability of Pyrotechnic Mechanical Devices

NASA Technical Reports Server (NTRS)

Bement, Laurence J.; Multhaup, Herbert A.

1997-01-01

This paper describes a new approach for evaluating mechanical performance and predicting the mechanical functional reliability of pyrotechnic devices. Not included are other possible failure modes, such as the initiation of the pyrotechnic energy source. The requirement of hundreds or thousands of consecutive, successful tests on identical components for reliability predictions, using the generally accepted go/no-go statistical approach routinely ignores physics of failure. The approach described in this paper begins with measuring, understanding and controlling mechanical performance variables. Then, the energy required to accomplish the function is compared to that delivered by the pyrotechnic energy source to determine mechanical functional margin. Finally, the data collected in establishing functional margin is analyzed to predict mechanical functional reliability, using small-sample statistics. A careful application of this approach can provide considerable cost improvements and understanding over that of go/no-go statistics. Performance and the effects of variables can be defined, and reliability predictions can be made by evaluating 20 or fewer units. The application of this approach to a pin puller used on a successful NASA mission is provided as an example.

A requirements index for information processing in hospitals.

PubMed

Ammenwerth, E; Buchauer, A; Haux, R

2002-01-01

Reference models describing typical information processing requirements in hospitals do not currently exist. This leads to high hospital information system (HIS) management expenses, for example, during tender processes for the acquisition of software application programs. Our aim was, therefore, to develop a comprehensive, lasting, technology-independent, and sufficiently detailed index of requirements for information processing in hospitals in order to reduce respective expenses. Two-dozen German experts established an index of requirements for information processing in university hospitals. This was done in a consensus-based, top-down, cyclic manner. Each functional requirement was derived from information processing functions and sub-functions of a hospital. The result is the first official German version of a requirements index, containing 233 functional requirements and 102 function-independent requirements, focusing on German needs. The functional requirements are structured according to the primary care process from admission to discharge and supplemented by requirements for handling patient records, work organization and resource planning, hospital management, research and education. Both the German version and its English translation are available in the Internet. The index of requirements contains general information processing requirements in hospitals which are formulated independent of information processing tools, or of HIS architectures. It aims at supporting HIS management, especially HIS strategic planning, HIS evaluation, and tender processes. The index can be regarded as a draft, which must, however, be refined according to the specific aims of a particular project. Although focused on German needs, we expect that it can also be useful in other countries. The high amount of interest shown for the index supports its usefulness.

Shuttle GPS R/PA evaluation analysis and performance tradeoff study

NASA Technical Reports Server (NTRS)

Booth, R. W. D.; Lindsey, W. C.

1978-01-01

Primary responsibility was understanding and analyzing the various GPS receiver functions as they relate to the shuttle environment. These receiver functions included acquisition properties of the sequential detector, acquisition and tracking properties of the various receiver phase locked loops, and the techniques of sequential receiver operation. In addition to these areas, support was provided in the areas of oscillator stability requirements, antenna management, and navigation filter requirements, including preposition aiding.

Transport suction apparatus and absorption materials evaluation

NASA Technical Reports Server (NTRS)

Krupa, Debra T.; Gosbee, John

1991-01-01

The specific objectives were as follows. The effectiveness and function was evaluated of the hand held, manually powered v-vac for suction during microgravity. The function was evaluated of the battery powered laerdal suction unit in microgravity. The two units in control of various types of simulated bodily fluids were compared. Various types of tubing and attachments were evaluated which are required to control the collection of bodily fluids during transport. Various materials were evaluated for absorption of simulated bodily fluids. And potential problems were identified for waste management and containment of secretions and fluids during transport. Test procedures, results, and conclusions are briefly discussed.

20 CFR 416.940 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... requirements. 416.940 Section 416.940 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

20 CFR 416.940 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... requirements. 416.940 Section 416.940 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

20 CFR 416.940 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... requirements. 416.940 Section 416.940 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

20 CFR 416.940 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... requirements. 416.940 Section 416.940 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

20 CFR 416.940 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... requirements. 416.940 Section 416.940 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

Crescent evaluation : appendix E : crescent demonstration office : evaluation report

DOT National Transportation Integrated Search

1994-02-01

The purpose of this review was to conduct a limited audit to determine how well the Crescent Demonstration Office functions perform from the user perspective and what enhancements might be considered desirable or required in a long-term, system-wide ...

The Generic Resolution Advisor and Conflict Evaluator (GRACE) for Detect-And-Avoid Systems

NASA Technical Reports Server (NTRS)

Abramson, Michael; Refai, Mohamad; Santiago, Confesor

2017-01-01

Java Architecture for Detect-And-Avoid (DAA) Extensibility and Modeling (JADEM) was developed at NASA Ames Research Center as a research and modeling tool for Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS). UAS will be required to have DAA systems in order to fulfill the regulatory requirement to remain well clear'' of other traffic. JADEM supports research on technological requirements and Minimum Operational Performance Standards (MOPS) for UAS DAA systems by providing a flexible and extensible software platform that includes models and algorithms for all major DAA functions. This paper describes one of these algorithms, the Generic Resolution Advisor and Conflict Evaluator (GRACE). GRACE supports two core DAA functions: threat evaluation and guidance. GRACE is generic in the sense that it is designed to work with any aircraft or sensor type (both cooperative and non-cooperative), and to be used in various applications and DAA guidance concepts, thus supporting evolving MOPS requirements and research. GRACE combines flexibility, robustness, and computational efficiency. It has modest memory requirements and can handle multiple cooperative and noncooperative intruders. GRACE has been used as a core JADEM component in several real-time and fast-time experiments, including human-in-the-loop simulations and live flight tests.

Functional Performance of Pyrovalves

NASA Technical Reports Server (NTRS)

Bement, Laurence J.

1996-01-01

Following several flight and ground test failures of spacecraft systems using single-shot, 'normally closed' pyrotechnically actuated valves (pyrovalves), a government/industry cooperative program was initiated to assess the functional performance of five qualified designs. The goal of the program was to improve performance-based requirements for the procurement of pyrovalves. Specific objectives included the demonstration of performance test methods, the measurement of 'blowby' (the passage of gases from the pyrotechnic energy source around the activating piston into the valve's fluid path), and the quantification of functional margins for each design. Experiments were conducted in-house at NASA on several units each of the five valve designs. The test methods used for this program measured the forces and energies required to actuate the valves, as well as the energies and the pressures (where possible) delivered by the pyrotechnic sources. Functional performance ranged widely among the designs. Blowby cannot be prevented by o-ring seals; metal-to-metal seals were effective. Functional margin was determined by dividing the energy delivered by the pyrotechnic sources in excess to that required to accomplish the function by the energy required for that function. All but two designs had adequate functional margins with the pyrotechnic cartridges evaluated.

GROUND-WATER MODEL TESTING: SYSTEMATIC EVALUATION AND TESTING OF CODE FUNCTIONALITY AND PERFORMANCE

EPA Science Inventory

Effective use of ground-water simulation codes as management decision tools requires the establishment of their functionality, performance characteristics, and applicability to the problem at hand. This is accomplished through application of a systematic code-testing protocol and...

Evaluation of cognitive and social functioning in patients requiring long-term inpatient psychiatric care using the International Classification of Functioning, Disability, and Health: a large-scale, multi-institutional observational study.

PubMed

Kawaguchi, Hideaki; Taguchi, Masamoto; Sukigara, Masune; Sakuragi, Shoji; Sugiyama, Naoya; Chiba, Hisomu; Kawasaki, Tatsuhito

2017-06-15

We comprehensively evaluated cognitive and social functioning in patients requiring long-term inpatient psychiatric care using the International Classification of Functioning, Disability, and Health. We surveyed 1967 patients receiving long-term inpatient psychiatric care. Patients were further categorized into an old long-stay group (n = 892, >5 years in hospitals) and a new long-stay group (n = 1075, 1-5 years in hospitals). We obtained responses for all the International Classification of Functioning, Disability, and Health items in domain b (Body Functions) and domain d (Activities and Participation). We estimated weighted means for each item using the propensity score to adjust for confounding factors. Responses were received from 307 hospitals (response rate of hospitals: 25.5%). Cognitive and social functioning in the old long-stay group was more severely impaired than in the new long-stay group. No statistically significant differences were observed regarding the International Classification of Functioning, Disability, and Health items associated with basic activities of daily living between the two groups. Combined therapy consisting of cognitive remediation and rehabilitation on social functioning for this patient population should be started from the early stage of hospitalization. Non-restrictive, independent environments may also be optimal for this patient population. Implications for rehabilitation Rehabilitation of cognitive and social functioning for patients requiring long-term inpatient psychiatric care should be started in the early stages of hospitalization. In psychiatric fields, the International Classification of Functioning, Disability, and Health checklist could facilitate individualized rehabilitation planning by allowing healthcare professionals to visually assess the comprehensive functioning of each patient using graphics such as radar charts.

A Set of Functional Brain Networks for the Comprehensive Evaluation of Human Characteristics.

PubMed

Sung, Yul-Wan; Kawachi, Yousuke; Choi, Uk-Su; Kang, Daehun; Abe, Chihiro; Otomo, Yuki; Ogawa, Seiji

2018-01-01

Many human characteristics must be evaluated to comprehensively understand an individual, and measurements of the corresponding cognition/behavior are required. Brain imaging by functional MRI (fMRI) has been widely used to examine brain function related to human cognition/behavior. However, few aspects of cognition/behavior of individuals or experimental groups can be examined through task-based fMRI. Recently, resting state fMRI (rs-fMRI) signals have been shown to represent functional infrastructure in the brain that is highly involved in processing information related to cognition/behavior. Using rs-fMRI may allow diverse information about the brain through a single MRI scan to be obtained, as rs-fMRI does not require stimulus tasks. In this study, we attempted to identify a set of functional networks representing cognition/behavior that are related to a wide variety of human characteristics and to evaluate these characteristics using rs-fMRI data. If possible, these findings would support the potential of rs-fMRI to provide diverse information about the brain. We used resting-state fMRI and a set of 130 psychometric parameters that cover most human characteristics, including those related to intelligence and emotional quotients and social ability/skill. We identified 163 brain regions by VBM analysis using regression analysis with 130 psychometric parameters. Next, using a 163 × 163 correlation matrix, we identified functional networks related to 111 of the 130 psychometric parameters. Finally, we made an 8-class support vector machine classifiers corresponding to these 111 functional networks. Our results demonstrate that rs-fMRI signals contain intrinsic information about brain function related to cognition/behaviors and that this set of 111 networks/classifiers can be used to comprehensively evaluate human characteristics.

38 CFR 4.96 - Special provisions regarding evaluation of respiratory conditions.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-6845. (1) Pulmonary function tests (PFT's) are required to evaluate these conditions except: (i) When the results of a maximum exercise capacity test are of record and are 20 ml/kg/min or less. If a maximum exercise capacity test is not of record, evaluate based on alternative criteria. (ii) When...

A unified wall function for compressible turbulence modelling

NASA Astrophysics Data System (ADS)

Ong, K. C.; Chan, A.

2018-05-01

Turbulence modelling near the wall often requires a high mesh density clustered around the wall and the first cells adjacent to the wall to be placed in the viscous sublayer. As a result, the numerical stability is constrained by the smallest cell size and hence requires high computational overhead. In the present study, a unified wall function is developed which is valid for viscous sublayer, buffer sublayer and inertial sublayer, as well as including effects of compressibility, heat transfer and pressure gradient. The resulting wall function applies to compressible turbulence modelling for both isothermal and adiabatic wall boundary conditions with the non-zero pressure gradient. Two simple wall function algorithms are implemented for practical computation of isothermal and adiabatic wall boundary conditions. The numerical results show that the wall function evaluates the wall shear stress and turbulent quantities of wall adjacent cells at wide range of non-dimensional wall distance and alleviate the number and size of cells required.

TWRS authorization basis configuration control summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendoza, D.P.

This document was developed to define the Authorization Basis management functional requirements for configuration control, to evaluate the management control systems currently in place, and identify any additional controls that may be required until the TWRS [Tank Waste Remediation System] Configuration Management system is fully in place.

20 CFR 404.1540 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... requirements. 404.1540 Section 404.1540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

20 CFR 404.1540 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... requirements. 404.1540 Section 404.1540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

20 CFR 404.1540 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... requirements. 404.1540 Section 404.1540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

20 CFR 404.1540 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... requirements. 404.1540 Section 404.1540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

20 CFR 404.1540 - Evaluating compliance with the treatment requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... requirements. 404.1540 Section 404.1540 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE..., hematological or urinalysis studies for individuals with drug addiction and hematological studies and breath...) Consistent attendance at and participation in treatment sessions; (3) Improved social functioning and levels...

NTP comparison process

NASA Technical Reports Server (NTRS)

Corban, Robert

1993-01-01

The systems engineering process for the concept definition phase of the program involves requirements definition, system definition, and consistent concept definition. The requirements definition process involves obtaining a complete understanding of the system requirements based on customer needs, mission scenarios, and nuclear thermal propulsion (NTP) operating characteristics. A system functional analysis is performed to provide a comprehensive traceability and verification of top-level requirements down to detailed system specifications and provides significant insight into the measures of system effectiveness to be utilized in system evaluation. The second key element in the process is the definition of system concepts to meet the requirements. This part of the process involves engine system and reactor contractor teams to develop alternative NTP system concepts that can be evaluated against specific attributes, as well as a reference configuration against which to compare system benefits and merits. Quality function deployment (QFD), as an excellent tool within Total Quality Management (TQM) techniques, can provide the required structure and provide a link to the voice of the customer in establishing critical system qualities and their relationships. The third element of the process is the consistent performance comparison. The comparison process involves validating developed concept data and quantifying system merits through analysis, computer modeling, simulation, and rapid prototyping of the proposed high risk NTP subsystems. The maximum amount possible of quantitative data will be developed and/or validated to be utilized in the QFD evaluation matrix. If upon evaluation of a new concept or its associated subsystems determine to have substantial merit, those features will be incorporated into the reference configuration for subsequent system definition and comparison efforts.

Range Safety for an Autonomous Flight Safety System

NASA Technical Reports Server (NTRS)

Lanzi, Raymond J.; Simpson, James C.

2010-01-01

The Range Safety Algorithm software encapsulates the various constructs and algorithms required to accomplish Time Space Position Information (TSPI) data management from multiple tracking sources, autonomous mission mode detection and management, and flight-termination mission rule evaluation. The software evaluates various user-configurable rule sets that govern the qualification of TSPI data sources, provides a prelaunch autonomous hold-launch function, performs the flight-monitoring-and-termination functions, and performs end-of-mission safing

Space shuttle propulsion systems on-board checkout and monitoring system development study (extension). Volume 1: Summary and technical results

NASA Technical Reports Server (NTRS)

1972-01-01

An analysis was conducted of the space shuttle propulsion systems to define the onboard checkout and monitoring function. A baseline space shuttle vehicle and mission were used to establish the techniques and approach for defining the requirements. The requirements were analyzed to formulate criteria for implementing the functions of preflight checkout, performance monitoring, fault isolation, emergency detection, display, data storage, postflight evaluation, and maintenance retest.

Bilateral assessment of functional tasks for robot-assisted therapy applications

PubMed Central

Wang, Sarah; Bai, Ping; Strachota, Elaine; Tchekanov, Guennady; Melbye, Jeff; McGuire, John

2011-01-01

This article presents a novel evaluation system along with methods to evaluate bilateral coordination of arm function on activities of daily living tasks before and after robot-assisted therapy. An affordable bilateral assessment system (BiAS) consisting of two mini-passive measuring units modeled as three degree of freedom robots is described. The process for evaluating functional tasks using the BiAS is presented and we demonstrate its ability to measure wrist kinematic trajectories. Three metrics, phase difference, movement overlap, and task completion time, are used to evaluate the BiAS system on a bilateral symmetric (bi-drink) and a bilateral asymmetric (bi-pour) functional task. Wrist position and velocity trajectories are evaluated using these metrics to provide insight into temporal and spatial bilateral deficits after stroke. The BiAS system quantified movements of the wrists during functional tasks and detected differences in impaired and unimpaired arm movements. Case studies showed that stroke patients compared to healthy subjects move slower and are less likely to use their arm simultaneously even when the functional task requires simultaneous movement. After robot-assisted therapy, interlimb coordination spatial deficits moved toward normal coordination on functional tasks. PMID:21881901

Efficient Credit Assignment through Evaluation Function Decomposition

NASA Technical Reports Server (NTRS)

Agogino, Adrian; Turner, Kagan; Mikkulainen, Risto

2005-01-01

Evolutionary methods are powerful tools in discovering solutions for difficult continuous tasks. When such a solution is encoded over multiple genes, a genetic algorithm faces the difficult credit assignment problem of evaluating how a single gene in a chromosome contributes to the full solution. Typically a single evaluation function is used for the entire chromosome, implicitly giving each gene in the chromosome the same evaluation. This method is inefficient because a gene will get credit for the contribution of all the other genes as well. Accurately measuring the fitness of individual genes in such a large search space requires many trials. This paper instead proposes turning this single complex search problem into a multi-agent search problem, where each agent has the simpler task of discovering a suitable gene. Gene-specific evaluation functions can then be created that have better theoretical properties than a single evaluation function over all genes. This method is tested in the difficult double-pole balancing problem, showing that agents using gene-specific evaluation functions can create a successful control policy in 20 percent fewer trials than the best existing genetic algorithms. The method is extended to more distributed problems, achieving 95 percent performance gains over tradition methods in the multi-rover domain.

Audibility-based predictions of speech recognition for children and adults with normal hearing.

PubMed

McCreery, Ryan W; Stelmachowicz, Patricia G

2011-12-01

This study investigated the relationship between audibility and predictions of speech recognition for children and adults with normal hearing. The Speech Intelligibility Index (SII) is used to quantify the audibility of speech signals and can be applied to transfer functions to predict speech recognition scores. Although the SII is used clinically with children, relatively few studies have evaluated SII predictions of children's speech recognition directly. Children have required more audibility than adults to reach maximum levels of speech understanding in previous studies. Furthermore, children may require greater bandwidth than adults for optimal speech understanding, which could influence frequency-importance functions used to calculate the SII. Speech recognition was measured for 116 children and 19 adults with normal hearing. Stimulus bandwidth and background noise level were varied systematically in order to evaluate speech recognition as predicted by the SII and derive frequency-importance functions for children and adults. Results suggested that children required greater audibility to reach the same level of speech understanding as adults. However, differences in performance between adults and children did not vary across frequency bands. © 2011 Acoustical Society of America

Composing, Analyzing and Validating Software Models

NASA Astrophysics Data System (ADS)

Sheldon, Frederick T.

1998-10-01

This research has been conducted at the Computational Sciences Division of the Information Sciences Directorate at Ames Research Center (Automated Software Engineering Grp). The principle work this summer has been to review and refine the agenda that were carried forward from last summer. Formal specifications provide good support for designing a functionally correct system, however they are weak at incorporating non-functional performance requirements (like reliability). Techniques which utilize stochastic Petri nets (SPNs) are good for evaluating the performance and reliability for a system, but they may be too abstract and cumbersome from the stand point of specifying and evaluating functional behavior. Therefore, one major objective of this research is to provide an integrated approach to assist the user in specifying both functionality (qualitative: mutual exclusion and synchronization) and performance requirements (quantitative: reliability and execution deadlines). In this way, the merits of a powerful modeling technique for performability analysis (using SPNs) can be combined with a well-defined formal specification language. In doing so, we can come closer to providing a formal approach to designing a functionally correct system that meets reliability and performance goals.

Composing, Analyzing and Validating Software Models

NASA Technical Reports Server (NTRS)

Sheldon, Frederick T.

1998-01-01

This research has been conducted at the Computational Sciences Division of the Information Sciences Directorate at Ames Research Center (Automated Software Engineering Grp). The principle work this summer has been to review and refine the agenda that were carried forward from last summer. Formal specifications provide good support for designing a functionally correct system, however they are weak at incorporating non-functional performance requirements (like reliability). Techniques which utilize stochastic Petri nets (SPNs) are good for evaluating the performance and reliability for a system, but they may be too abstract and cumbersome from the stand point of specifying and evaluating functional behavior. Therefore, one major objective of this research is to provide an integrated approach to assist the user in specifying both functionality (qualitative: mutual exclusion and synchronization) and performance requirements (quantitative: reliability and execution deadlines). In this way, the merits of a powerful modeling technique for performability analysis (using SPNs) can be combined with a well-defined formal specification language. In doing so, we can come closer to providing a formal approach to designing a functionally correct system that meets reliability and performance goals.

[What and how to evaluate clinical-surgical competence. The resident and staff surgeon perspective].

PubMed

Cervantes-Sánchez, Carlos Roberto; Chávez-Vizcarra, Paola; Barragán-Ávila, María Cristina; Parra-Acosta, Haydee; Herrera-Mendoza, Renzo Eduardo

2016-01-01

Evaluation is a means for significant and rigorous improvement of the educational process. Therefore, competence evaluation should allow assessing the complex activity of medical care, as well as improving the training process. This is the case in the evaluation process of clinical-surgical competences. A cross-sectional study was designed to measure knowledge about the evaluation of clinical-surgical competences for the General Surgery residency program at the Faculty of Medicine, Universidad Autónoma de Chihuahua (UACH). A 55-item questionnaire divided into six sections was used (perception, planning, practice, function, instruments and strategies, and overall evaluation), with a six level Likert scale, performing a descriptive, correlation and comparative analysis, with a significance level of 0.001. In both groups perception of evaluation was considered as a further qualification. As regards tools, the best known was the written examination. As regards function, evaluation was considered as a further administrative requirement. In the correlation analysis, evaluation was perceived as qualification and was significantly associated with measurement, assessment and accreditation. In the comparative analysis between residents and staff surgeons, a significant difference was found as regards the perception of the evaluation as a measurement of knowledge (Student t test: p=0.04). The results provide information about the concept we have about the evaluation of clinical-surgical competences, considering it as a measure of learning achievement for a socially required certification. There is confusion as regards the perception of evaluation, its function, goals and scopes as benefit for those evaluated. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

Functional performance of pyrovalves

NASA Technical Reports Server (NTRS)

Bement, Laurence J.

1996-01-01

Following several flight and ground test failures of spacecraft systems using single-shot, 'normally closed' pyrotechnically actuated valves (pyrovalves), a Government/Industry cooperative program was initiated to assess the functional performance of five qualified designs. The goal of the program was to provide information on functional performance of pyrovalves to allow users the opportunity to improve procurement requirements. Specific objectives included the demonstration of performance test methods, the seating; these gases/particles entered the fluid path of measurement of 'blowby' (the passage of gases from the pyrotechnic energy source around the activating piston into the valve's fluid path), and the quantification of functional margins for each design. Experiments were conducted at NASA's Langley Research Center on several units for each of the five valve designs. The test methods used for this program measured the forces and energies required to actuate the valves, as well as the energies and the pressures (where possible) delivered by the pyrotechnic sources. Functional performance ranged widely among the designs. Blowby cannot be prevented by o-ring seals; metal-to-metal seals were effective. Functional margin was determined by dividing the energy delivered by the pyrotechnic sources in excess to that required to accomplish the function by the energy required for that function. Two of the five designs had inadequate functional margins with the pyrotechnic cartridges evaluated.

On the evaluation of derivatives of Gaussian integrals

NASA Technical Reports Server (NTRS)

Helgaker, Trygve; Taylor, Peter R.

1992-01-01

We show that by a suitable change of variables, the derivatives of molecular integrals over Gaussian-type functions required for analytic energy derivatives can be evaluated with significantly less computational effort than current formulations. The reduction in effort increases with the order of differentiation.

Implementation of Insight Responsibilities in Process Engineering

NASA Technical Reports Server (NTRS)

Osborne, Deborah M.

1997-01-01

This report describes an approach for evaluating flight readiness (COFR) and contractor performance evaluation (award fee) as part of the insight role of NASA Process Engineering at Kennedy Space Center. Several evaluation methods are presented, including systems engineering evaluations and use of systems performance data. The transition from an oversight function to the insight function is described. The types of analytical tools appropriate for achieving the flight readiness and contractor performance evaluation goals are described and examples are provided. Special emphasis is placed upon short and small run statistical quality control techniques. Training requirements for system engineers are delineated. The approach described herein would be equally appropriate in other directorates at Kennedy Space Center.

Use of Pictorial Evaluations to Measure Knowledge Gained by Hispanic Landscape Workers Receiving Safety Training

ERIC Educational Resources Information Center

Bauske, Ellen M.; Fuhrman, Nicholas E.; Martinez-Espinoza, Alfredo D.; Orellana, Rolando

2013-01-01

Landscape work is dangerous. In the Southeast, Hispanic workers predominate in landscape industries. The incidence of functional illiteracy in this group of workers is high. A pictorial knowledge-based evaluation instrument was developed to measure the effectiveness of the trainings. No reading skills were required to take the evaluation. The…

lsjk—a C++ library for arbitrary-precision numeric evaluation of the generalized log-sine functions

NASA Astrophysics Data System (ADS)

Kalmykov, M. Yu.; Sheplyakov, A.

2005-10-01

Generalized log-sine functions Lsj(k)(θ) appear in higher order ɛ-expansion of different Feynman diagrams. We present an algorithm for the numerical evaluation of these functions for real arguments. This algorithm is implemented as a C++ library with arbitrary-precision arithmetics for integer 0⩽k⩽9 and j⩾2. Some new relations and representations of the generalized log-sine functions are given. Program summaryTitle of program:lsjk Catalogue number:ADVS Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVS Program obtained from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing terms: GNU General Public License Computers:all Operating systems:POSIX Programming language:C++ Memory required to execute:Depending on the complexity of the problem, at least 32 MB RAM recommended No. of lines in distributed program, including testing data, etc.:41 975 No. of bytes in distributed program, including testing data, etc.:309 156 Distribution format:tar.gz Other programs called:The CLN library for arbitrary-precision arithmetics is required at version 1.1.5 or greater External files needed:none Nature of the physical problem:Numerical evaluation of the generalized log-sine functions for real argument in the region 0<θ<π. These functions appear in Feynman integrals Method of solution:Series representation for the real argument in the region 0<θ<π Restriction on the complexity of the problem:Limited up to Lsj(9)(θ), and j is an arbitrary integer number. Thus, all function up to the weight 12 in the region 0<θ<π can be evaluated. The algorithm can be extended up to higher values of k(k>9) without modification Typical running time:Depending on the complexity of problem. See text below.

Technology readiness assessment of advanced space engine integrated controls and health monitoring

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1991-01-01

An evaluation is given for an integrated control and health monitoring system (ICHM) system that is designed to be used with hydrogen-oxygen rocket engines. The minimum required ICHM functions, system elements, technology readiness, and system cost are assessed for a system which permits the operation of H-O engines that are space-based, reusable, and descent throttleable. Based on the evaluation of the H-O ICHM, it is estimated that the minimum system requirements for demonstration on an engine system testbed will require an investment of 30 to 45 million dollars over six years.

Sensitivity analysis, calibration, and testing of a distributed hydrological model using error‐based weighting and one objective function

USGS Publications Warehouse

Foglia, L.; Hill, Mary C.; Mehl, Steffen W.; Burlando, P.

2009-01-01

We evaluate the utility of three interrelated means of using data to calibrate the fully distributed rainfall‐runoff model TOPKAPI as applied to the Maggia Valley drainage area in Switzerland. The use of error‐based weighting of observation and prior information data, local sensitivity analysis, and single‐objective function nonlinear regression provides quantitative evaluation of sensitivity of the 35 model parameters to the data, identification of data types most important to the calibration, and identification of correlations among parameters that contribute to nonuniqueness. Sensitivity analysis required only 71 model runs, and regression required about 50 model runs. The approach presented appears to be ideal for evaluation of models with long run times or as a preliminary step to more computationally demanding methods. The statistics used include composite scaled sensitivities, parameter correlation coefficients, leverage, Cook's D, and DFBETAS. Tests suggest predictive ability of the calibrated model typical of hydrologic models.

Clinical outcome of double crown-retained implant overdentures with zirconia primary crowns

PubMed Central

Buergers, Ralf; Ziebolz, Dirk; Roediger, Matthias

2015-01-01

PURPOSE This retrospective study aims at the evaluation of implant-supported overdentures (IODs) supported by ceramo-galvanic double crowns (CGDCs: zirconia primary crowns + galvano-formed secondary crown). MATERIALS AND METHODS In a private practice, 14 patients were restored with 18 IODs (mandible: 11, maxilla: 7) retained by CGDCs on 4 - 8 implants and annually evaluated for technical and/or biological failures/complications. RESULTS One of the 86 inserted implants failed during the healing period (cumulative survival rate (CSR) implants: 98.8%). During the prosthetic functional period (mean: 5.9 ± 2.2 years), 1 implant demonstrated an abutment fracture (CSR-abutments: 98.2%), and one case of peri-implantitis was detected. All IODs remained in function (CSR-denture: 100%). A total of 15 technical complications required interventions to maintain function (technical complication rate: 0.178 treatments/patients/year). CONCLUSION Considering the small sample size, the use of CGDCs for the attachment of IODs is possible without an increased risk of technical complications. However, for a final evaluation, results from a larger cohort are required. PMID:26330981

Revitalizing the HRD Function.

ERIC Educational Resources Information Center

Lawrie, John

1986-01-01

A proactive approach to human resource development requires assessment of skills and attitudes, review of the diagnosis, an incubation period, implementation of training, and evaluation of results. (SK)

Functional capacity evaluation of work performance among individuals with pelvic injuries following motor vehicle accidents.

PubMed

Ratzon, Navah Z; Ari Shevil, Eynat Ben; Froom, Paul; Friedman, Sharon; Amit, Yehuda

2013-01-01

Pelvic injuries following motor vehicle accidents (MVA) cause disability and affect work capabilities. This study evaluated functional, self-report, and medical-based factors that could predict work capacity as was reflected in a functional capacity evaluation (FCE) among persons who sustained a pelvic injury. It was hypothesized that self-reported functional status and bio-demographic variables would predict work capacity. Sixty-one community-dwelling adults previously hospitalized following a MVA induced pelvic injury. FCE for work performance was conducted using the Physical Work Performance Evaluation (PWPE). Additional data was collected through a demographics questionnaire and the Functional Status Questionnaire. All participants underwent an orthopedic medical examination of the hip and lower extremities. Most participants self-reported that their work capacity post-injury were lower than their job required. PWPE scores indicated below-range functional performance. Regression models predicted 23% to 51% of PWPE subtests. Participants' self-report of functioning (instrumental activities of daily living and work) and bio-demographic variables (gender and age) were better predictors of PWPE scores than factors originating from the medical examination. Results support the inclusion of FCE, in addition to self-report of functioning and medical examination, to evaluate work capacity among individuals' post-pelvic injury and interventions and discharge planning.

Concept development of automatic guidance for rotorcraft obstacle avoidance

NASA Technical Reports Server (NTRS)

Cheng, Victor H. L.

1990-01-01

The automatic guidance of rotorcraft for obstacle avoidance in nap-of-the-earth flight is studied. A hierarchical breakdown of the guidance components is used to identify the functional requirements. These requirements and anticipated sensor capabilities lead to a preliminary guidance concept, which has been evaluated via computer simulations.

An approach to modeling the consequences of beech mortality from beech bark disease

Treesearch

Harry T. Valentine

1983-01-01

Changes to an extant model of forest growth and transition that allow an evaluation of the consequences of beech bark disease are outlined. Required are a function to scale beech growth for the effects of beech bark disease, a function to predict beech mortality from beech bark disease, and a function that predicts root-sprout regeneration of beech.

Evaluation of functional color vision requirements and current color vision screening tests for air traffic control specialists.

DOT National Transportation Integrated Search

1990-08-01

An experiment was conducted to evaluate the relation of type and degree of color vision deficiency and aeromedical color vision screening test scores to performance of color-dependent tasks of Air Traffic Control Specialists. The subjects included 37...

A Functional Model for Management of Large Scale Assessments.

ERIC Educational Resources Information Center

Banta, Trudy W.; And Others

This functional model for managing large-scale program evaluations was developed and validated in connection with the assessment of Tennessee's Nutrition Education and Training Program. Management of such a large-scale assessment requires the development of a structure for the organization; distribution and recovery of large quantities of…

Space shuttle configuration accounting functional design specification

NASA Technical Reports Server (NTRS)

1974-01-01

An analysis is presented of the requirements for an on-line automated system which must be capable of tracking the status of requirements and engineering changes and of providing accurate and timely records. The functional design specification provides the definition, description, and character length of the required data elements and the interrelationship of data elements to adequately track, display, and report the status of active configuration changes. As changes to the space shuttle program levels II and III configuration are proposed, evaluated, and dispositioned, it is the function of the configuration management office to maintain records regarding changes to the baseline and to track and report the status of those changes. The configuration accounting system will consist of a combination of computers, computer terminals, software, and procedures, all of which are designed to store, retrieve, display, and process information required to track proposed and proved engineering changes to maintain baseline documentation of the space shuttle program levels II and III.

MSFC Skylab structures and mechanical systems mission evaluation

NASA Technical Reports Server (NTRS)

1974-01-01

A performance analysis for structural and mechanical major hardware systems and components is presented. Development background testing, modifications, and requirement adjustments are included. Functional narratives are provided for comparison purposes as are predicted design performance criterion. Each item is evaluated on an individual basis: that is, (1) history (requirements, design, manufacture, and test); (2) in-orbit performance (description and analysis); and (3) conclusions and recommendations regarding future space hardware application. Overall, the structural and mechanical performance of the Skylab hardware was outstanding.

Space Suit Portable Life Support System (PLSS) 2.0 Pre-Installation Acceptance (PIA) Testing

NASA Technical Reports Server (NTRS)

Watts, Carly; Vogel, Matthew

2016-01-01

Following successful completion of the space suit Portable Life Support System (PLSS) 1.0 development and testing in 2011, the second system-level prototype, PLSS 2.0, was developed in 2012 to continue the maturation of the advanced PLSS design which is intended to reduce consumables, improve reliability and robustness, and incorporate additional sensing and functional capabilities over the current Space Shuttle/International Space Station Extravehicular Mobility Unit (EMU) PLSS. PLSS 2.0 represents the first attempt at a packaged design comprising first generation or later component prototypes and medium fidelity interfaces within a flight-like representative volume. Pre-Installation Acceptance (PIA) is carryover terminology from the Space Shuttle Program referring to the series of test sequences used to verify functionality of the EMU PLSS prior to installation into the Space Shuttle airlock for launch. As applied to the PLSS 2.0 development and testing effort, PIA testing designated the series of 27 independent test sequences devised to verify component and subsystem functionality, perform in situ instrument calibrations, generate mapping data to define set-points for control algorithms, evaluate hardware performance against advanced PLSS design requirements, and provide quantitative and qualitative feedback on evolving design requirements and performance specifications. PLSS 2.0 PIA testing was carried out from 3/20/13 - 3/15/14 using a variety of test configurations to perform test sequences that ranged from stand-alone component testing to system-level testing, with evaluations becoming increasingly integrated as the test series progressed. Each of the 27 test sequences was vetted independently, with verification of basic functionality required before completion. Because PLSS 2.0 design requirements were evolving concurrently with PLSS 2.0 PIA testing, the requirements were used as guidelines to assess performance during the tests; after the completion of PIA testing, test data served to improve the fidelity and maturity of design requirements as well as plans for future advanced PLSS functional testing.

Impact of Psychiatric Information on Potential Jurors in Evaluating High-Functioning Autism Spectrum Disorder (hfASD)

ERIC Educational Resources Information Center

Berryessa, Colleen M.; Milner, Lauren C.; Garrison, Nanibaa' A.; Cho, Mildred K.

2015-01-01

During a trial involving an offender with a mental disorder, jurors are often required to evaluate information on the disorder and its characteristics. This evaluation relies on how jurors understand and synthesize psychiatric and other evidence on the disorder and this information's impact on the case, an offender's culpability, and the rendered…

Human factors considerations in the design and evaluation of electronic flight bags (EFBs), version 1 : basic functions

DOT National Transportation Integrated Search

2003-09-01

Electronic Flight Bags (EFBs) are coming into the flight deck, bringing along with them a wide range of human factors considerations. In order to understand and assess the full impact of an EFB, designers and evaluators require an understanding of ho...

The evolving role of physiotherapists in pre-employment screening for workplace injury prevention: are functional capacity evaluations the answer?

PubMed

Legge, Jennifer

2013-10-01

Musculoskeletal injuries account for the largest proportion of workplace injuries. In an attempt to predict, and subsequently manage, the risk of sprains and strains in the workplace, employers are turning to pre-employment screening. Functional capacity evaluations (FCEs) are increasing in popularity as a tool for pre-employment screening despite limited published evidence for their validity in healthy working populations. This narrative review will present an overview of the state of the evidence for pre-employment functional testing, propose a framework for decision-making to determine the suitability of assessment tools, and discuss the role and potential ethical challenges for physiotherapists conducting pre-employment functional testing. Much of the evidence surrounding the validity of functional testing is in the context of the injured worker and prediction of return to work. In healthy populations, FCE components, such as aerobic fitness and manual handling activities, have demonstrated predictability of workplace injury in a small number of studies. This predictability improves when workers' performance is compared with the job demands. This job-specific approach is also required to meet anti-discrimination requirements. There are a number of practical limitations to functional testing, although these are not limited to the pre-employment domain. Physiotherapists need to have a clear understanding of the legal requirements and potential ethical challenges that they may face when conducting pre-employment functional assessments (PEFAs). Further research is needed into the efficacy of pre-employment testing for workplace injury prevention. Physiotherapists and PEFAs are just one part of a holistic approach to workplace injury prevention.

A low-complexity 2-point step size gradient projection method with selective function evaluations for smoothed total variation based CBCT reconstructions.

PubMed

Song, Bongyong; Park, Justin C; Song, William Y

2014-11-07

The Barzilai-Borwein (BB) 2-point step size gradient method is receiving attention for accelerating Total Variation (TV) based CBCT reconstructions. In order to become truly viable for clinical applications, however, its convergence property needs to be properly addressed. We propose a novel fast converging gradient projection BB method that requires 'at most one function evaluation' in each iterative step. This Selective Function Evaluation method, referred to as GPBB-SFE in this paper, exhibits the desired convergence property when it is combined with a 'smoothed TV' or any other differentiable prior. This way, the proposed GPBB-SFE algorithm offers fast and guaranteed convergence to the desired 3DCBCT image with minimal computational complexity. We first applied this algorithm to a Shepp-Logan numerical phantom. We then applied to a CatPhan 600 physical phantom (The Phantom Laboratory, Salem, NY) and a clinically-treated head-and-neck patient, both acquired from the TrueBeam™ system (Varian Medical Systems, Palo Alto, CA). Furthermore, we accelerated the reconstruction by implementing the algorithm on NVIDIA GTX 480 GPU card. We first compared GPBB-SFE with three recently proposed BB-based CBCT reconstruction methods available in the literature using Shepp-Logan numerical phantom with 40 projections. It is found that GPBB-SFE shows either faster convergence speed/time or superior convergence property compared to existing BB-based algorithms. With the CatPhan 600 physical phantom, the GPBB-SFE algorithm requires only 3 function evaluations in 30 iterations and reconstructs the standard, 364-projection FDK reconstruction quality image using only 60 projections. We then applied the algorithm to a clinically-treated head-and-neck patient. It was observed that the GPBB-SFE algorithm requires only 18 function evaluations in 30 iterations. Compared with the FDK algorithm with 364 projections, the GPBB-SFE algorithm produces visibly equivalent quality CBCT image for the head-and-neck patient with only 180 projections, in 131.7 s, further supporting its clinical applicability.

Proceedings and findings of the 1976 Workshop on Ride Quality. [passenger acceptance of transportation systems

NASA Technical Reports Server (NTRS)

Kuhlthau, A. R. (Editor)

1976-01-01

The workshop was organized around the study of the three basic transfer functions required to evaluate and/or predict passenger acceptance of transportation systems: These are the vehicle, passenger, and value transfer functions. For the purpose of establishing working groups corresponding to the basic transfer functions, it was decided to split the vehicle transfer function into two distinct groups studying surface vehicles and air/marine vehicles, respectively.

On Improving Efficiency of Differential Evolution for Aerodynamic Shape Optimization Applications

NASA Technical Reports Server (NTRS)

Madavan, Nateri K.

2004-01-01

Differential Evolution (DE) is a simple and robust evolutionary strategy that has been proven effective in determining the global optimum for several difficult optimization problems. Although DE offers several advantages over traditional optimization approaches, its use in applications such as aerodynamic shape optimization where the objective function evaluations are computationally expensive is limited by the large number of function evaluations often required. In this paper various approaches for improving the efficiency of DE are reviewed and discussed. These approaches are implemented in a DE-based aerodynamic shape optimization method that uses a Navier-Stokes solver for the objective function evaluations. Parallelization techniques on distributed computers are used to reduce turnaround times. Results are presented for the inverse design of a turbine airfoil. The efficiency improvements achieved by the different approaches are evaluated and compared.

An approach for software-driven and standard-based support of cross-enterprise tumor boards.

PubMed

Mangesius, Patrick; Fischer, Bernd; Schabetsberger, Thomas

2015-01-01

For tumor boards, the networking of different medical disciplines' expertise continues to gain importance. However, interdisciplinary tumor boards spread across several institutions are rarely supported by information technology tools today. The aim of this paper is to point out an approach for a tumor board management system prototype. For analyzing the requirements, an incremental process was used. The requirements were surveyed using Informal Conversational Interview and documented with Use Case Diagrams defined by the Unified Modeling Language (UML). Analyses of current EHR standards were conducted to evaluate technical requirements. Functional and technical requirements of clinical conference applications were evaluated and documented. In several steps, workflows were derived and application mockups were created. Although there is a vast amount of common understanding concerning how clinical conferences should be conducted and how their workflows should be structured, these are hardly standardized, neither on a functional nor on a technical level. This results in drawbacks for participants and patients. Using modern EHR technologies based on profiles such as IHE Cross Enterprise document sharing (XDS), these deficits could be overcome.

Toward the Decision Tree for Inferring Requirements Maturation Types

NASA Astrophysics Data System (ADS)

Nakatani, Takako; Kondo, Narihito; Shirogane, Junko; Kaiya, Haruhiko; Hori, Shozo; Katamine, Keiichi

Requirements are elicited step by step during the requirements engineering (RE) process. However, some types of requirements are elicited completely after the scheduled requirements elicitation process is finished. Such a situation is regarded as problematic situation. In our study, the difficulties of eliciting various kinds of requirements is observed by components. We refer to the components as observation targets (OTs) and introduce the word “Requirements maturation.” It means when and how requirements are elicited completely in the project. The requirements maturation is discussed on physical and logical OTs. OTs Viewed from a logical viewpoint are called logical OTs, e.g. quality requirements. The requirements of physical OTs, e.g., modules, components, subsystems, etc., includes functional and non-functional requirements. They are influenced by their requesters' environmental changes, as well as developers' technical changes. In order to infer the requirements maturation period of each OT, we need to know how much these factors influence the OTs' requirements maturation. According to the observation of actual past projects, we defined the PRINCE (Pre Requirements Intelligence Net Consideration and Evaluation) model. It aims to guide developers in their observation of the requirements maturation of OTs. We quantitatively analyzed the actual cases with their requirements elicitation process and extracted essential factors that influence the requirements maturation. The results of interviews of project managers are analyzed by WEKA, a data mining system, from which the decision tree was derived. This paper introduces the PRINCE model and the category of logical OTs to be observed. The decision tree that helps developers infer the maturation type of an OT is also described. We evaluate the tree through real projects and discuss its ability to infer the requirements maturation types.

Usability evaluation of mobile applications; where do we stand?

NASA Astrophysics Data System (ADS)

Zahra, Fatima; Hussain, Azham; Mohd, Haslina

2017-10-01

The range and availability of mobile applications is expanding rapidly. With the increased processing power available on portable devices, developers are increasing the range of services by embracing smartphones in their extensive and diverse practices. While usability testing and evaluations of mobile applications have not yet touched the accuracy level of other web based applications. The existing usability models do not adequately capture the complexities of interacting with applications on a mobile platform. Therefore, this study aims to presents review on existing usability models for mobile applications. These models are in their infancy but with time and more research they may eventually be adopted. Moreover, different categories of mobile apps (medical, entertainment, education) possess different functional and non-functional requirements thus customized models are required for diverse mobile applications.

An Evaluation of Resurgence during Functional Communication Training

ERIC Educational Resources Information Center

Wacker, David P.; Harding, Jay W.; Morgan, Theresa A.; Berg, Wendy K.; Schieltz, Kelly M.; Lee, John F.; Padilla, Yaniz C.

2013-01-01

Three children who displayed destructive behavior maintained by negative reinforcement received functional communication training (FCT). During FCT, the children were required to complete a demand and then to mand (touch a card attached to a microswitch, sign, or vocalize) to receive brief play breaks. Prior to and 1 to 3 times following the…

Reorganization of Functional Connectivity as a Correlate of Cognitive Recovery in Acquired Brain Injury

ERIC Educational Resources Information Center

Castellanos, Nazareth P.; Paul, Nuria; Ordonez, Victoria E.; Demuynck, Olivier; Bajo, Ricardo; Campo, Pablo; Bilbao, Alvaro; Ortiz, Tomas; del-Pozo, Francisco; Maestu, Fernando

2010-01-01

Cognitive processes require a functional interaction between specialized multiple, local and remote brain regions. Although these interactions can be strongly altered by an acquired brain injury, brain plasticity allows network reorganization to be principally responsible for recovery. The present work evaluates the impact of brain injury on…

Bronchial asthma.

PubMed

Liccardi, Gennaro; Salzillo, Antonello; Sofia, Matteo; D'Amato, Maria; D'Amato, Gennaro

2012-02-01

The aim of this review is to underline the need for an adequate clinical and functional evaluation of respiratory function and asthma control in patients undergoing surgical procedures requiring general anesthesia to obtain useful information for an adequate preoperative pharmacological approach. It has been shown that baseline uncontrolled clinical/functional conditions of airways represent the most important risk factors for perioperative bronchospasm. In nonemergency conditions, asthma patients should undergo clinical/functional assessment at least 1 week before the surgery intervention to obtain, the better feasible control of asthma symptoms in the single patient. Some simple preoperative information given by the patient in preoperative consultation may be sufficient to identify individuals with uncontrolled or poor controlled asthmatic conditions. Spirometric evaluation is essential in individuals with poor control of symptoms, as well as in those patients with uncertain anamnestic data or limited perception of respiratory symptoms, and in those requiring lung resection. A better control of asthma must be considered the 'gold standard' for a patient at 'a reasonable low risk' to develop perioperative/postoperative bronchospasm. International consensus promoted by pulmonologists, anesthesiologists, and allergists might be useful to define a better diagnostic and therapeutic approach.

Evaluation of the user requirements processes for NASA terrestrial applications programs

NASA Technical Reports Server (NTRS)

1982-01-01

To support the evolution of increasingly sound user requirements definition processes that would meet the broad range of NASA's terrestrial applications planning and management needs during the 1980's, the user requirements processes as they function in the real world at the senior and middle management levels were evaluated. Special attention was given to geologic mapping and domestic crop reporting to provide insight into problems associated with the development and management of user established conventional practices and data sources. An attempt was made to identify alternative NASA user interfaces that sustain strengths, alleviate weaknesses, maximize application to multiple problems, and simplify management cognizance. Some of the alternatives are outlined and evaluated. It is recommended that NASA have an identified organizational point of focus for consolidation and oversight of the user processes.

Configuration evaluation and criteria plan. Volume 2: Evaluation critera plan (preliminary). Space Transportation Main Engine (STME) configuration study

NASA Technical Reports Server (NTRS)

Bair, E. K.

1986-01-01

The unbiased selection of the Space Transportation Main Engine (STME) configuration requires that the candidate engines be evaluated against a predetermined set of criteria which must be properly weighted to emphasize critical requirements defined prior to the actual evaluation. The evaluation and selection process involves the following functions: (1) determining if a configuration can satisfy basic STME requirements (yes/no); (2) defining the evaluation criteria; (3) selecting the criteria relative importance or weighting; (4) determining the weighting sensitivities; and (5) establishing a baseline for engine evaluation. The criteria weighting and sensitivities are cost related and are based on mission models and vehicle requirements. The evaluation process is used as a coarse screen to determine the candidate engines for the parametric studies and as a fine screen to determine concept(s) for conceptual design. The criteria used for the coarse and fine screen evaluation process is shown. The coarse screen process involves verifying that the candidate engines can meet the yes/no screening requirements and a semi-subjective quantitative evaluation. The fine screen engines have to meet all of the yes/no screening gates and are then subjected to a detailed evaluation or assessment using the quantitative cost evaluation processes. The option exists for re-cycling a concept through the quantitative portion of the screening and allows for some degree of optimization. The basic vehicle is a two stage LOX/HC, LOX/LH2 parallel burn vehicle capable of placing 150,000 lbs in low Earth orbit (LEO).

Maintaining Continuity of Knowledge (CoK) of Spent Fuel Pools: Tool Survey - Scenarios, Technology Considerations, and Evaluation Criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benz, Jacob M.; Tanner, Jennifer E.; Smart, Heidi A.

2016-01-18

The objective of this report is to identify the foundational elements which will drive the survey and evaluation of potential technologies to be considered to maintain CoK of spent fuel within a pool in the potential absence of light or in low light scenarios. These foundational elements include identifying use cases that highlight the type of environments in which the technologies may be asked to operate; the CoK elements required of the technologies, such as unique identification or presence/absence identification; the functional and operational requirements for the technologies; and the criteria against which the technologies will be evaluated.

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 5: Design of the IPAD system. Part 2: System design. Part 3: General purpose utilities, phase 1, task 2

NASA Technical Reports Server (NTRS)

Garrocq, C. A.; Hurley, M. J.

1973-01-01

Viable designs are presented of various elements of the IPAD framework software, data base management system, and required new languages in relation to the capabilities of operating systems software. A thorough evaluation was made of the basic systems functions to be provide by each software element, its requirements defined in the conceptual design, the operating systems features affecting its design, and the engineering/design functions which it was intended to enhance.

Diagnostic and functional structure of a high-resolution thyroid nodule clinic.

PubMed

Fernández-García, José Carlos; Mancha-Doblas, Isabel; Ortega-Jiménez, María Victoria; Ruiz-Escalante, José Francisco; Castells-Fusté, Ignasi; Tofé-Povedano, Santiago; Argüelles-Jiménez, Iñaki; Tinahones, Francisco José

2014-01-01

Appearance of a thyroid nodule has become a daily occurrence in clinical practice. Adequate thyroid nodule assessment requires several diagnostic tests and multiple medical appointments, which results in a substantial delay in diagnosis. Implementation of a high-resolution thyroid nodule clinic largely avoids these drawbacks by condensing in a single appointment all tests required for adequate evaluation of thyroid nodule. This paper reviews the diagnostic and functional structure of a high-resolution thyroid nodule clinic. Copyright © 2013 SEEN. Published by Elsevier Espana. All rights reserved.

Evaluating the Functionality of Conceptual Models

NASA Astrophysics Data System (ADS)

Mehmood, Kashif; Cherfi, Samira Si-Said

Conceptual models serve as the blueprints of information systems and their quality plays decisive role in the success of the end system. It has been witnessed that majority of the IS change-requests results due to deficient functionalities in the information systems. Therefore, a good analysis and design method should ensure that conceptual models are functionally correct and complete, as they are the communicating mediator between the users and the development team. Conceptual model is said to be functionally complete if it represents all the relevant features of the application domain and covers all the specified requirements. Our approach evaluates the functional aspects on multiple levels of granularity in addition to providing the corrective actions or transformation for improvement. This approach has been empirically validated by practitioners through a survey.

Space-based multifunctional end effector systems functional requirements and proposed designs

NASA Technical Reports Server (NTRS)

Mishkin, A. H.; Jau, B. M.

1988-01-01

The end effector is an essential element of teleoperator and telerobot systems to be employed in space in the next decade. The report defines functional requirements for end effector systems to perform operations that are currently only feasible through Extra-Vehicular Activity (EVA). Specific tasks and functions that the end effectors must be capable of performing are delineated. Required capabilities for forces and torques, clearances, compliance, and sensing are described, using current EVA requirements as guidelines where feasible. The implications of these functional requirements on the elements of potential end effector systems are discussed. The systems issues that must be considered in the design of space-based manipulator systems are identified; including impacts on subsystems tightly coupled to the end effector, i.e., control station, information processing, manipulator arm, tool and equipment stowage. Possible end effector designs are divided into three categories: single degree-of-freedom end effectors, multiple degree of freedom end effectors, and anthropomorphic hands. Specific design alternatives are suggested and analyzed within the individual categories. Two evaluations are performed: the first considers how well the individual end effectors could substitute for EVA; the second compares how manipulator systems composed of the top performers from the first evaluation would improve the space shuttle Remote Manipulator System (RMS) capabilities. The analysis concludes that the anthropomorphic hand is best-suited for EVA tasks. A left- and right-handed anthropomorphic manipulator arm configuration is suggested as appropriate to be affixed to the RMS, but could also be used as part of the Smart Front End for the Orbital Maneuvering Vehicle (OMV). The technical feasibility of the anthropomorphic hand and its control are demonstrated. An evolutionary development approach is proposed and approximate scheduling provided for implementing the suggested manipulator systems in time for space stations operations in the early 1990s.

Optimization and evaluation of a proportional derivative controller for planar arm movement.

PubMed

Jagodnik, Kathleen M; van den Bogert, Antonie J

2010-04-19

In most clinical applications of functional electrical stimulation (FES), the timing and amplitude of electrical stimuli have been controlled by open-loop pattern generators. The control of upper extremity reaching movements, however, will require feedback control to achieve the required precision. Here we present three controllers using proportional derivative (PD) feedback to stimulate six arm muscles, using two joint angle sensors. Controllers were first optimized and then evaluated on a computational arm model that includes musculoskeletal dynamics. Feedback gains were optimized by minimizing a weighted sum of position errors and muscle forces. Generalizability of the controllers was evaluated by performing movements for which the controller was not optimized, and robustness was tested via model simulations with randomly weakened muscles. Robustness was further evaluated by adding joint friction and doubling the arm mass. After optimization with a properly weighted cost function, all PD controllers performed fast, accurate, and robust reaching movements in simulation. Oscillatory behavior was seen after improper tuning. Performance improved slightly as the complexity of the feedback gain matrix increased. Copyright 2009 Elsevier Ltd. All rights reserved.

Optimization and evaluation of a proportional derivative controller for planar arm movement

PubMed Central

Jagodnik, Kathleen M.; van den Bogert, Antonie J.

2013-01-01

In most clinical applications of functional electrical stimulation (FES), the timing and amplitude of electrical stimuli have been controlled by open-loop pattern generators. The control of upper extremity reaching movements, however, will require feedback control to achieve the required precision. Here we present three controllers using proportional derivative (PD) feedback to stimulate six arm muscles, using two joint angle sensors. Controllers were first optimized and then evaluated on a computational arm model that includes musculoskeletal dynamics. Feedback gains were optimized by minimizing a weighted sum of position errors and muscle forces. Generalizability of the controllers was evaluated by performing movements for which the controller was not optimized, and robustness was tested via model simulations with randomly weakened muscles. Robustness was further evaluated by adding joint friction and doubling the arm mass. After optimization with a properly weighted cost function, all PD controllers performed fast, accurate, and robust reaching movements in simulation. Oscillatory behavior was seen after improper tuning. Performance improved slightly as the complexity of the feedback gain matrix increased. PMID:20097345

Development of an expert system prototype for determining software functional requirements for command management activities at NASA Goddard

NASA Technical Reports Server (NTRS)

Liebowitz, J.

1986-01-01

The development of an expert system prototype for software functional requirement determination for NASA Goddard's Command Management System, as part of its process of transforming general requests into specific near-earth satellite commands, is described. The present knowledge base was formulated through interactions with domain experts, and was then linked to the existing Knowledge Engineering Systems (KES) expert system application generator. Steps in the knowledge-base development include problem-oriented attribute hierarchy development, knowledge management approach determination, and knowledge base encoding. The KES Parser and Inspector, in addition to backcasting and analogical mapping, were used to validate the expert system-derived requirements for one of the major functions of a spacecraft, the solar Maximum Mission. Knowledge refinement, evaluation, and implementation procedures of the expert system were then accomplished.

On Improving Efficiency of Differential Evolution for Aerodynamic Shape Optimization Applications

NASA Technical Reports Server (NTRS)

Madavan, Nateri K.

2004-01-01

Differential Evolution (DE) is a simple and robust evolutionary strategy that has been provEn effective in determining the global optimum for several difficult optimization problems. Although DE offers several advantages over traditional optimization approaches, its use in applications such as aerodynamic shape optimization where the objective function evaluations are computationally expensive is limited by the large number of function evaluations often required. In this paper various approaches for improving the efficiency of DE are reviewed and discussed. Several approaches that have proven effective for other evolutionary algorithms are modified and implemented in a DE-based aerodynamic shape optimization method that uses a Navier-Stokes solver for the objective function evaluations. Parallelization techniques on distributed computers are used to reduce turnaround times. Results are presented for standard test optimization problems and for the inverse design of a turbine airfoil. The efficiency improvements achieved by the different approaches are evaluated and compared.

Flight simulator requirements for airline transport pilot training - An evaluation of motion system design alternatives

NASA Technical Reports Server (NTRS)

Lee, A. T.; Bussolari, S. R.

1986-01-01

The effect of motion platform systems on pilot behavior is considered with emphasis placed on civil aviation applications. A dynamic model for human spatial orientation based on the physiological structure and function of the human vestibular system is presented. Motion platform alternatives were evaluated on the basis of the following motion platform conditions: motion with six degrees-of-freedom required for Phase II simulators and two limited motion conditions. Consideration was given to engine flameout, airwork, and approach and landing scenarios.

How discriminating are discriminative instruments?

PubMed

Hankins, Matthew

2008-05-27

The McMaster framework introduced by Kirshner & Guyatt is the dominant paradigm for the development of measures of health status and health-related quality of life (HRQL). The framework defines the functions of such instruments as evaluative, predictive or discriminative. Evaluative instruments are required to be sensitive to change (responsiveness), but there is no corresponding index of the degree to which discriminative instruments are sensitive to cross-sectional differences. This paper argues that indices of validity and reliability are not sufficient to demonstrate that a discriminative instrument performs its function of discriminating between individuals, and that the McMaster framework would be augmented by the addition of a separate index of discrimination. The coefficient proposed by Ferguson (Delta) is easily adapted to HRQL instruments and is a direct, non-parametric index of the degree to which an instrument distinguishes between individuals. While Delta should prove useful in the development and evaluation of discriminative instruments, further research is required to elucidate the relationship between the measurement properties of discrimination, reliability and responsiveness.

The evolving role of physiotherapists in pre-employment screening for workplace injury prevention: are functional capacity evaluations the answer?

PubMed Central

Legge, Jennifer

2013-01-01

Background Musculoskeletal injuries account for the largest proportion of workplace injuries. In an attempt to predict, and subsequently manage, the risk of sprains and strains in the workplace, employers are turning to pre-employment screening. Functional capacity evaluations (FCEs) are increasing in popularity as a tool for pre-employment screening despite limited published evidence for their validity in healthy working populations. Objectives This narrative review will present an overview of the state of the evidence for pre-employment functional testing, propose a framework for decision-making to determine the suitability of assessment tools, and discuss the role and potential ethical challenges for physiotherapists conducting pre-employment functional testing. Major Findings Much of the evidence surrounding the validity of functional testing is in the context of the injured worker and prediction of return to work. In healthy populations, FCE components, such as aerobic fitness and manual handling activities, have demonstrated predictability of workplace injury in a small number of studies. This predictability improves when workers' performance is compared with the job demands. This job-specific approach is also required to meet anti-discrimination requirements. There are a number of practical limitations to functional testing, although these are not limited to the pre-employment domain. Physiotherapists need to have a clear understanding of the legal requirements and potential ethical challenges that they may face when conducting pre-employment functional assessments (PEFAs). Conclusions Further research is needed into the efficacy of pre-employment testing for workplace injury prevention. Physiotherapists and PEFAs are just one part of a holistic approach to workplace injury prevention. PMID:24124346

An expert system prototype for aiding in the development of software functional requirements for NASA Goddard's command management system: A case study and lessons learned

NASA Technical Reports Server (NTRS)

Liebowitz, Jay

1986-01-01

At NASA Goddard, the role of the command management system (CMS) is to transform general requests for spacecraft opeerations into detailed operational plans to be uplinked to the spacecraft. The CMS is part of the NASA Data System which entails the downlink of science and engineering data from NASA near-earth satellites to the user, and the uplink of command and control data to the spacecraft. Presently, it takes one to three years, with meetings once or twice a week, to determine functional requirements for CMS software design. As an alternative approach to the present technique of developing CMS software functional requirements, an expert system prototype was developed to aid in this function. Specifically, the knowledge base was formulated through interactions with domain experts, and was then linked to an existing expert system application generator called 'Knowledge Engineering System (Version 1.3).' Knowledge base development focused on four major steps: (1) develop the problem-oriented attribute hierachy; (2) determine the knowledge management approach; (3) encode the knowledge base; and (4) validate, test, certify, and evaluate the knowledge base and the expert system prototype as a whole. Backcasting was accomplished for validating and testing the expert system prototype. Knowledge refinement, evaluation, and implementation procedures of the expert system prototype were then transacted.

Fast computation of the electrolyte-concentration transfer function of a lithium-ion cell model

NASA Astrophysics Data System (ADS)

Rodríguez, Albert; Plett, Gregory L.; Trimboli, M. Scott

2017-08-01

One approach to creating physics-based reduced-order models (ROMs) of battery-cell dynamics requires first generating linearized Laplace-domain transfer functions of all cell internal electrochemical variables of interest. Then, the resulting infinite-dimensional transfer functions can be reduced by various means in order to find an approximate low-dimensional model. These methods include Padé approximation or the Discrete-Time Realization algorithm. In a previous article, Lee and colleagues developed a transfer function of the electrolyte concentration for a porous-electrode pseudo-two-dimensional lithium-ion cell model. Their approach used separation of variables and Sturm-Liouville theory to compute an infinite-series solution to the transfer function, which they then truncated to a finite number of terms for reasons of practicality. Here, we instead use a variation-of-parameters approach to arrive at a different representation of the identical solution that does not require a series expansion. The primary benefits of the new approach are speed of computation of the transfer function and the removal of the requirement to approximate the transfer function by truncating the number of terms evaluated. Results show that the speedup of the new method can be more than 3800.

An inverse problem strategy based on forward model evaluations: Gradient-based optimization without adjoint solves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aguilo Valentin, Miguel Alejandro

2016-07-01

This study presents a new nonlinear programming formulation for the solution of inverse problems. First, a general inverse problem formulation based on the compliance error functional is presented. The proposed error functional enables the computation of the Lagrange multipliers, and thus the first order derivative information, at the expense of just one model evaluation. Therefore, the calculation of the Lagrange multipliers does not require the solution of the computationally intensive adjoint problem. This leads to significant speedups for large-scale, gradient-based inverse problems.

Procurement engineering - the productivity factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bargerstock, S.B.

1993-01-01

The industry is several years on the road to implementation of the Nuclear Management and Resources Council (NUMARC) initiatives on commercial-grade item dedication and procurement. Utilities have taken several approaches to involve engineering in the procurement process. A common result for the approaches is the additional operations and maintenance (O M) cost imposed by the added resource requirements. Procurement engineering productivity is a key element in controlling this business area. Experience shows that 400 to 500% improvements in productivity are possible with a 2-yr period. Improving the productivity of the procurement engineering function is important in today's competitive utility environment.more » Procurement engineering typically involves four distinct technical evaluation responsibilities along with several administrative areas. Technical evaluations include the functionally based safety classification of replacement components and parts (lacking a master parts list), the determination of dedication requirements for safety-related commercial-grade items, the preparation of a procurement specification to maintain the licensed design bases, and the equivalency evaluation of alternate items not requiring the design-change process. Administrative duties include obtaining technical review of vendor-supplied documentation, identifying obsolete parts and components, resolving material nonconformances, initiating the design-change process for replacement items (as needed), and providing technical support to O M. Although most utilities may not perform or require all the noted activities, a large percentage will apply to each utility station.« less

Post-operative pulmonary and shoulder function after sternal reconstruction for patients with chest wall sarcomas.

PubMed

Nishida, Yoshihiro; Tsukushi, Satoshi; Urakawa, Hiroshi; Toriyama, Kazuhiro; Kamei, Yuzuru; Yokoi, Kohei; Ishiguro, Naoki

2015-12-01

Sternal resection is occasionally required for patients with malignant tumors, particularly sarcomas, in the sternal region. Few reports have described post-operative respiratory and shoulder function after sternal resection for patients with bone and soft-tissue sarcomas. Eight consecutive patients with bone and soft tissue sarcomas requiring sternal resection were the focus of this study. Chest wall was reconstructed with a non-rigid or semi-rigid prosthesis combined, in most cases, with soft tissue flap reconstruction. Clinical outcomes investigated included complications, shoulder function, evaluated with Musculoskeletal Tumor Society-International Symposium of Limb Salvage system, and respiratory function, evaluated by use of spirometry. The anterior chest wall was reconstructed with non-rigid strings for 3 patients and with polypropylene mesh for 5. There were no severe post-operative complications, for example surgical site infection or pneumonia. All 3 patients with non-rigid reconstruction experienced paradoxical breathing, whereas none with polypropylene mesh did so. Post-operatively, FEV(1)% was unchanged but %VC was significantly reduced (p = 0.01), irrespective of the reconstruction method used (strings or polypropylene mesh). Shoulder function was not impaired. Among patients undergoing sternal resection, post-operative shoulder function was excellent. Pulmonary function was slightly restricted, but not sufficiently so to interfere with the activities of daily living (ADL). Paradoxical breathing is a slight concern for non-rigid reconstruction.

Java Architecture for Detect and Avoid Extensibility and Modeling

NASA Technical Reports Server (NTRS)

Santiago, Confesor; Mueller, Eric Richard; Johnson, Marcus A.; Abramson, Michael; Snow, James William

2015-01-01

Unmanned aircraft will equip with a detect-and-avoid (DAA) system that enables them to comply with the requirement to "see and avoid" other aircraft, an important layer in the overall set of procedural, strategic and tactical separation methods designed to prevent mid-air collisions. This paper describes a capability called Java Architecture for Detect and Avoid Extensibility and Modeling (JADEM), developed to prototype and help evaluate various DAA technological requirements by providing a flexible and extensible software platform that models all major detect-and-avoid functions. Figure 1 illustrates JADEM's architecture. The surveillance module can be actual equipment on the unmanned aircraft or simulators that model the process by which sensors on-board detect other aircraft and provide track data to the traffic display. The track evaluation function evaluates each detected aircraft and decides whether to provide an alert to the pilot and its severity. Guidance is a combination of intruder track information, alerting, and avoidance/advisory algorithms behind the tools shown on the traffic display to aid the pilot in determining a maneuver to avoid a loss of well clear. All these functions are designed with a common interface and configurable implementation, which is critical in exploring DAA requirements. To date, JADEM has been utilized in three computer simulations of the National Airspace System, three pilot-in-the-loop experiments using a total of 37 professional UAS pilots, and two flight tests using NASA's Predator-B unmanned aircraft, named Ikhana. The data collected has directly informed the quantitative separation standard for "well clear", safety case, requirements development, and the operational environment for the DAA minimum operational performance standards. This work was performed by the Separation Assurance/Sense and Avoid Interoperability team under NASA's UAS Integration in the NAS project.

Evaluation of four methods for estimating leaf area of isolated trees

Treesearch

P.J. Peper; E.G. McPherson

2003-01-01

The accurate modeling of the physiological and functional processes of urban forests requires information on the leaf area of urban tree species. Several non-destructive, indirect leaf area sampling methods have shown good performance for homogenous canopies. These methods have not been evaluated for use in urban settings where trees are typically isolated and...

Measurement of Teen Dating Violence Attitudes: An Item Response Theory Evaluation of Differential Item Functioning According to Gender

ERIC Educational Resources Information Center

Edelen, Maria Orlando; McCaffrey, Daniel F.; Marshall, Grant N.; Jaycox, Lisa H.

2009-01-01

Accurate assessment of attitudes about intimate partner violence is important for evaluation of prevention and early intervention programs. Assessment of attitudes about cross-gender interactions is particularly susceptible to bias because it requires specifying the gender of the perpetrator and the victim. As it is likely that respondents will…

Now That Your Students Have Created Web-Based Digital Portfolios, How Do You Evaluate Them?

ERIC Educational Resources Information Center

Goldsby, Dianne; Fazal, Minaz

2001-01-01

Discussion of the growing use of digital portfolios for student assessment focuses on a program at Iona College to develop a four-point rubric to evaluate students' Web-based digital portfolios. Considers form (design and aesthetics), function and usability (ease of use), and components (presence and communication of the required samples).…

A low-complexity 2-point step size gradient projection method with selective function evaluations for smoothed total variation based CBCT reconstructions

NASA Astrophysics Data System (ADS)

Song, Bongyong; Park, Justin C.; Song, William Y.

2014-11-01

The Barzilai-Borwein (BB) 2-point step size gradient method is receiving attention for accelerating Total Variation (TV) based CBCT reconstructions. In order to become truly viable for clinical applications, however, its convergence property needs to be properly addressed. We propose a novel fast converging gradient projection BB method that requires ‘at most one function evaluation’ in each iterative step. This Selective Function Evaluation method, referred to as GPBB-SFE in this paper, exhibits the desired convergence property when it is combined with a ‘smoothed TV’ or any other differentiable prior. This way, the proposed GPBB-SFE algorithm offers fast and guaranteed convergence to the desired 3DCBCT image with minimal computational complexity. We first applied this algorithm to a Shepp-Logan numerical phantom. We then applied to a CatPhan 600 physical phantom (The Phantom Laboratory, Salem, NY) and a clinically-treated head-and-neck patient, both acquired from the TrueBeam™ system (Varian Medical Systems, Palo Alto, CA). Furthermore, we accelerated the reconstruction by implementing the algorithm on NVIDIA GTX 480 GPU card. We first compared GPBB-SFE with three recently proposed BB-based CBCT reconstruction methods available in the literature using Shepp-Logan numerical phantom with 40 projections. It is found that GPBB-SFE shows either faster convergence speed/time or superior convergence property compared to existing BB-based algorithms. With the CatPhan 600 physical phantom, the GPBB-SFE algorithm requires only 3 function evaluations in 30 iterations and reconstructs the standard, 364-projection FDK reconstruction quality image using only 60 projections. We then applied the algorithm to a clinically-treated head-and-neck patient. It was observed that the GPBB-SFE algorithm requires only 18 function evaluations in 30 iterations. Compared with the FDK algorithm with 364 projections, the GPBB-SFE algorithm produces visibly equivalent quality CBCT image for the head-and-neck patient with only 180 projections, in 131.7 s, further supporting its clinical applicability.

The evaluation and extension of TAE in the development of a user interface management system

NASA Technical Reports Server (NTRS)

Burkhart, Brenda; Sugar, Ross

1986-01-01

The development of a user interface management system (UIMS) for an information gathering and display system is discussed. The system interface requirements are outlined along with the UIMS functional characteristics. Those systems requirements which are supported by the current Transportable Applications Executive (TAE) are listed and necessary modifications to the TAE are described.

Electrical power systems for Mars

NASA Technical Reports Server (NTRS)

Giudici, Robert J.

1986-01-01

Electrical power system options for Mars Manned Modules and Mars Surface Bases were evaluated for both near-term and advanced performance potential. The power system options investigated for the Mission Modules include photovoltaics, solar thermal, nuclear reactor, and isotope power systems. Options discussed for Mars Bases include the above options with the addition of a brief discussion of open loop energy conversion of Mars resources, including utilization of wind, subsurface thermal gradients, and super oxides. Electrical power requirements for Mission Modules were estimated for three basic approaches: as a function of crew size; as a function of electric propulsion; and as a function of transmission of power from an orbiter to the surface of Mars via laser or radio frequency. Mars Base power requirements were assumed to be determined by production facilities that make resources available for follow-on missions leading to the establishment of a permanently manned Base. Requirements include the production of buffer gas and propellant production plants.

Electrical power systems for Mars

NASA Astrophysics Data System (ADS)

Giudici, Robert J.

1986-05-01

Electrical power system options for Mars Manned Modules and Mars Surface Bases were evaluated for both near-term and advanced performance potential. The power system options investigated for the Mission Modules include photovoltaics, solar thermal, nuclear reactor, and isotope power systems. Options discussed for Mars Bases include the above options with the addition of a brief discussion of open loop energy conversion of Mars resources, including utilization of wind, subsurface thermal gradients, and super oxides. Electrical power requirements for Mission Modules were estimated for three basic approaches: as a function of crew size; as a function of electric propulsion; and as a function of transmission of power from an orbiter to the surface of Mars via laser or radio frequency. Mars Base power requirements were assumed to be determined by production facilities that make resources available for follow-on missions leading to the establishment of a permanently manned Base. Requirements include the production of buffer gas and propellant production plants.

Evaluating visual function in cataract.

PubMed

Elliott, D B

1993-11-01

This paper reviews recent research on the evaluation of visual function in cataract. Visual impairment in cataract is principally caused by increased intraocular forward light scatter. It is assumed that visual acuity (VA) measurements assess the impact of narrow angle light scatter. This also makes the measurement of high spatial frequency contrast sensitivity (CS) unnecessary. However, VA measurements alone are an inadequate assessment of visual impairment in some patients with cataract. In addition, it is suggested that a measurement of wide-angle light scatter is required. This can be evaluated directly using the van den Berg Straylightmeter, or indirectly using low spatial frequency CS or disability glare (DG) tests. The following are discussed: (1) the relative usefulness of these tests; (2) how they can be incorporated into the decision as to when to extract a cataract; and (3) the importance of considering binocular visual function.

Automated design synthesis of robotic/human workcells for improved manufacturing system design in hazardous environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Joshua M.

Manufacturing tasks that are deemed too hazardous for workers require the use of automation, robotics, and/or other remote handling tools. The associated hazards may be radiological or nonradiological, and based on the characteristics of the environment and processing, a design may necessitate robotic labor, human labor, or both. There are also other factors such as cost, ergonomics, maintenance, and efficiency that also effect task allocation and other design choices. Handling the tradeoffs of these factors can be complex, and lack of experience can be an issue when trying to determine if and what feasible automation/robotics options exist. To address thismore » problem, we utilize common engineering design approaches adapted more for manufacturing system design in hazardous environments. We limit our scope to the conceptual and embodiment design stages, specifically a computational algorithm for concept generation and early design evaluation. In regard to concept generation, we first develop the functional model or function structure for the process, using the common 'verb-noun' format for describing function. A common language or functional basis for manufacturing was developed and utilized to formalize function descriptions and guide rules for function decomposition. Potential components for embodiment are also grouped in terms of this functional language and are stored in a database. The properties of each component are given as quantitative and qualitative criteria. Operators are also rated for task-relevant criteria which are used to address task compatibility. Through the gathering of process requirements/constraints, construction of the component database, and development of the manufacturing basis and rule set, design knowledge is stored and available for computer use. Thus, once the higher level process functions are defined, the computer can automate the synthesis of new design concepts through alternating steps of embodiment and function structure updates/decomposition. In the process, criteria guide function allocation of components/operators and help ensure compatibility and feasibility. Through multiple function assignment options and varied function structures, multiple design concepts are created. All of the generated designs are then evaluated based on a number of relevant evaluation criteria: cost, dose, ergonomics, hazards, efficiency, etc. These criteria are computed using physical properties/parameters of each system based on the qualities an engineer would use to make evaluations. Nuclear processes such as oxide conversion and electrorefining are utilized to aid algorithm development and provide test cases for the completed program. Through our approach, we capture design knowledge related to manufacturing and other operations in hazardous environments to enable a computational program to automatically generate and evaluate system design concepts.« less

Cognitive Functioning in Space Exploration Missions: A Human Requirement

NASA Technical Reports Server (NTRS)

Fiedler, Edan; Woolford, Barbara

2005-01-01

Solving cognitive issues in the exploration missions will require implementing results from both Human Behavior and Performance, and Space Human Factors Engineering. Operational and research cognitive requirements need to reflect a coordinated management approach with appropriate oversight and guidance from NASA headquarters. First, this paper will discuss one proposed management method that would combine the resources of Space Medicine and Space Human Factors Engineering at JSC, other NASA agencies, the National Space Biomedical Research Institute, Wyle Labs, and other academic or industrial partners. The proposed management is based on a Human Centered Design that advocates full acceptance of the human as a system equal to other systems. Like other systems, the human is a system with many subsystems, each of which has strengths and limitations. Second, this paper will suggest ways to inform exploration policy about what is needed for optimal cognitive functioning of the astronaut crew, as well as requirements to ensure necessary assessment and intervention strategies for the human system if human limitations are reached. Assessment strategies will include clinical evaluation and fitness-to-perform evaluations. Clinical intervention tools and procedures will be available to the astronaut and space flight physician. Cognitive performance will be supported through systematic function allocation, task design, training, and scheduling. Human factors requirements and guidelines will lead to well-designed information displays and retrieval systems that reduce crew time and errors. Means of capturing process, design, and operational requirements to ensure crew performance will be discussed. Third, this paper will describe the current plan of action, and future challenges to be resolved before a lunar or Mars expedition. The presentation will include a proposed management plan for research, involvement of various organizations, and a timetable of deliverables.

Development of a virtual reality assessment of everyday living skills.

PubMed

Ruse, Stacy A; Davis, Vicki G; Atkins, Alexandra S; Krishnan, K Ranga R; Fox, Kolleen H; Harvey, Philip D; Keefe, Richard S E

2014-04-23

Cognitive impairments affect the majority of patients with schizophrenia and these impairments predict poor long term psychosocial outcomes.  Treatment studies aimed at cognitive impairment in patients with schizophrenia not only require demonstration of improvements on cognitive tests, but also evidence that any cognitive changes lead to clinically meaningful improvements.  Measures of "functional capacity" index the extent to which individuals have the potential to perform skills required for real world functioning.  Current data do not support the recommendation of any single instrument for measurement of functional capacity.  The Virtual Reality Functional Capacity Assessment Tool (VRFCAT) is a novel, interactive gaming based measure of functional capacity that uses a realistic simulated environment to recreate routine activities of daily living. Studies are currently underway to evaluate and establish the VRFCAT's sensitivity, reliability, validity, and practicality. This new measure of functional capacity is practical, relevant, easy to use, and has several features that improve validity and sensitivity of measurement of function in clinical trials of patients with CNS disorders.

Board evaluation and effectiveness: models, components and perspectives.

PubMed

Scharf, M; Marty, D; Barnsley, J

1994-01-01

Health facility boards are being challenged to increase their effectiveness in the face of the changing health care environment. To this end, accreditation standards require boards to develop methods of evaluating their governing function and performance. During a survey of governance issues, the authors interviewed a group of health service executives with respect to board evaluation at their facilities. The responses yielded insights relating to models and components of evaluation, board missions and policies, mentoring programs and trustee education and orientation.

Requirements Document for Development of a Livermore Tomography Tools Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seetho, I. M.

In this document, we outline an exercise performed at LLNL to evaluate the user interface deficits of a LLNL-developed CT reconstruction software package, Livermore Tomography Tools (LTT). We observe that a difficult-to-use command line interface and the lack of support functions compound to generate a bottleneck in the CT reconstruction process when input parameters to key functions are not well known. Through the exercise of systems engineering best practices, we generate key performance parameters for a LTT interface refresh, and specify a combination of back-end (“test-mode” functions) and front-end (graphical user interface visualization and command scripting tools) solutions to LTT’smore » poor user interface that aim to mitigate issues and lower costs associated with CT reconstruction using LTT. Key functional and non-functional requirements and risk mitigation strategies for the solution are outlined and discussed.« less

Comparing production function models for wildfire risk analysis in the wildland-urban interface

Treesearch

D. Evan Mercer; Jeffrey P. Prestemon

2005-01-01

Wildfires create damages in the wildland-urban interface (WUI) that total hundreds of millions of dollars annually in the United States. Understanding how fires are produced in built-up areas near and within fire prone landscapes requires evaluating and quantifling the roles that humans play in fire regimes. We outline a typology of wildfire production functions (WPFs...

Pseudocontinent perineal colostomy following abdominoperineal resection: technique and findings in 49 patients.

PubMed

Lasser, P; Dubé, P; Guillot, J M; Elias, D

2001-02-01

This prospective study was designed to evaluate functional results following the creation of a pseudocontinent perineal colostomy (PCPC) using Schmidt's technique. Functional results in 40 patients whose rectum was resected due to cancer and reconstructed by PCPC between 1989 and 1995 in our institution were evaluated. Anatomical and pathological features of cancers, surgical technique and post-operative care are described. Morbidity, functional results and degree of patient satisfaction are reported. Median follow-up was 45 months (18--87 months) and was completed in 100% of patients. There were no operative deaths. Twenty patients had post-operative complications and two patients had an early conversion to a definitive abdominal colostomy due to serious perineal complications. On a functional level, four patients had normal continence, 23 had gas incontinence, nine had occasional minimal soiling and two had incontinence requiring iliac colostomy. Eighty-six per cent of patients were either highly satisfied or satisfied with their continence. PCPC is a reliable technique that can be suggested as an alternative to a left iliac colostomy following amputation of the rectum due to cancer, provided that certain requirements are met: careful selection of patients, informed consent, flawless surgical technique and lifetime daily colic irrigation. Copyright Harcourt Publishers Limited.

Review of methods for measuring β-cell function: Design considerations from the Restoring Insulin Secretion (RISE) Consortium.

PubMed

Hannon, Tamara S; Kahn, Steven E; Utzschneider, Kristina M; Buchanan, Thomas A; Nadeau, Kristen J; Zeitler, Philip S; Ehrmann, David A; Arslanian, Silva A; Caprio, Sonia; Edelstein, Sharon L; Savage, Peter J; Mather, Kieren J

2018-01-01

The Restoring Insulin Secretion (RISE) study was initiated to evaluate interventions to slow or reverse the progression of β-cell failure in type 2 diabetes (T2D). To design the RISE study, we undertook an evaluation of methods for measurement of β-cell function and changes in β-cell function in response to interventions. In the present paper, we review approaches for measurement of β-cell function, focusing on methodologic and feasibility considerations. Methodologic considerations included: (1) the utility of each technique for evaluating key aspects of β-cell function (first- and second-phase insulin secretion, maximum insulin secretion, glucose sensitivity, incretin effects) and (2) tactics for incorporating a measurement of insulin sensitivity in order to adjust insulin secretion measures for insulin sensitivity appropriately. Of particular concern were the capacity to measure β-cell function accurately in those with poor function, as is seen in established T2D, and the capacity of each method for demonstrating treatment-induced changes in β-cell function. Feasibility considerations included: staff burden, including time and required methodological expertise; participant burden, including time and number of study visits; and ease of standardizing methods across a multicentre consortium. After this evaluation, we selected a 2-day measurement procedure, combining a 3-hour 75-g oral glucose tolerance test and a 2-stage hyperglycaemic clamp procedure, augmented with arginine. © 2017 John Wiley & Sons Ltd.

A review of consumer involvement in evaluations of case management: consistency with a recovery paradigm.

PubMed

Marshall, Sarah L; Crowe, Trevor P; Oades, Lindsay G; Deane, Frank F; Kavanagh, David J

2007-03-01

This Open Forum examines research on case management that draws on consumer perspectives. It clarifies the extent of consumer involvement and whether evaluations were informed by recovery perspectives. Searches of three databases revealed 13 studies that sought to investigate consumer perspectives. Only one study asked consumers about experiences of recovery. Most evaluations did not adequately assess consumers' views, and active consumer participation in research was rare. Supporting an individual's recovery requires commitment to a recovery paradigm that incorporates traditional symptom reduction and improved functioning, with broader recovery principles, and a shift in focus from illness to well-being. It also requires greater involvement of consumers in the implementation of case management and ownership of their own recovery process, not just in research that evaluates the practice.

A computer program for uncertainty analysis integrating regression and Bayesian methods

USGS Publications Warehouse

Lu, Dan; Ye, Ming; Hill, Mary C.; Poeter, Eileen P.; Curtis, Gary

2014-01-01

This work develops a new functionality in UCODE_2014 to evaluate Bayesian credible intervals using the Markov Chain Monte Carlo (MCMC) method. The MCMC capability in UCODE_2014 is based on the FORTRAN version of the differential evolution adaptive Metropolis (DREAM) algorithm of Vrugt et al. (2009), which estimates the posterior probability density function of model parameters in high-dimensional and multimodal sampling problems. The UCODE MCMC capability provides eleven prior probability distributions and three ways to initialize the sampling process. It evaluates parametric and predictive uncertainties and it has parallel computing capability based on multiple chains to accelerate the sampling process. This paper tests and demonstrates the MCMC capability using a 10-dimensional multimodal mathematical function, a 100-dimensional Gaussian function, and a groundwater reactive transport model. The use of the MCMC capability is made straightforward and flexible by adopting the JUPITER API protocol. With the new MCMC capability, UCODE_2014 can be used to calculate three types of uncertainty intervals, which all can account for prior information: (1) linear confidence intervals which require linearity and Gaussian error assumptions and typically 10s–100s of highly parallelizable model runs after optimization, (2) nonlinear confidence intervals which require a smooth objective function surface and Gaussian observation error assumptions and typically 100s–1,000s of partially parallelizable model runs after optimization, and (3) MCMC Bayesian credible intervals which require few assumptions and commonly 10,000s–100,000s or more partially parallelizable model runs. Ready access allows users to select methods best suited to their work, and to compare methods in many circumstances.

Design of a Workstation by a Cognitive Approach

PubMed Central

Jaspers, MWM; Steen, T.; Geelen, M.; van den Bos, C.

2001-01-01

To ensure ultimate acceptance of computer systems that are easy to use, provide the desired functionality and fits into users work practices requires the use of improved methods for system design and evaluation. Both designing and evaluating workstations that link up smoothly with daily routine of physicians' work requires a thorough understanding of their working practices. The application of methods from cognitive science may contribute to a thorough understanding of the activities involved in medical information processing. We used cognitive task analysis in designing a physicians' workstation, which seems a promising method to ensure that the system meets the user needs.

Evaluation of medical management during a mass casualty incident exercise: an objective assessment tool to enhance direct observation.

PubMed

Ingrassia, Pier Luigi; Prato, Federico; Geddo, Alessandro; Colombo, Davide; Tengattini, Marco; Calligaro, Sara; La Mura, Fabrizio; Franc, Jeffrey Michael; Della Corte, Francesco

2010-11-01

Functional exercises represent an important link between disaster planning and disaster response. Although these exercises are widely performed, no standardized method exists for their evaluation. To describe a simple and objective method to assess medical performance during functional exercise events. An evaluation tool comprising three data fields (triage, clinical maneuvers, and radio usage), accompanied by direct anecdotal observational methods, was used to evaluate a large functional mass casualty incident exercise. Seventeen medical responders managed 112 victims of a simulated building explosion. Although 81% of the patients were assigned the appropriate triage codes, evacuation from the site did not follow in priority. Required maneuvers were performed correctly in 85.2% of airway maneuvers and 78.7% of breathing maneuvers, however, significant under-treatment occurred, possibly due to equipment shortages. Extensive use of radio communication was documented. In evaluating this tool, the structured markers were informative, but further information provided by direct observation was invaluable. A three-part tool (triage, medical maneuvers, and radio usage) can provide a method to evaluate functional mass casualty incident exercises, and is easily implemented. For the best results, it should be used in conjunction with direct observation. The evaluation tool has great potential as a reproducible and internationally recognized tool for evaluating disaster management exercises. Copyright © 2010 Elsevier Inc. All rights reserved.

Probability techniques for reliability analysis of composite materials

NASA Technical Reports Server (NTRS)

Wetherhold, Robert C.; Ucci, Anthony M.

1994-01-01

Traditional design approaches for composite materials have employed deterministic criteria for failure analysis. New approaches are required to predict the reliability of composite structures since strengths and stresses may be random variables. This report will examine and compare methods used to evaluate the reliability of composite laminae. The two types of methods that will be evaluated are fast probability integration (FPI) methods and Monte Carlo methods. In these methods, reliability is formulated as the probability that an explicit function of random variables is less than a given constant. Using failure criteria developed for composite materials, a function of design variables can be generated which defines a 'failure surface' in probability space. A number of methods are available to evaluate the integration over the probability space bounded by this surface; this integration delivers the required reliability. The methods which will be evaluated are: the first order, second moment FPI methods; second order, second moment FPI methods; the simple Monte Carlo; and an advanced Monte Carlo technique which utilizes importance sampling. The methods are compared for accuracy, efficiency, and for the conservativism of the reliability estimation. The methodology involved in determining the sensitivity of the reliability estimate to the design variables (strength distributions) and importance factors is also presented.

Evaluation of Brine Processing Technologies for Spacecraft Wastewater

NASA Technical Reports Server (NTRS)

Shaw, Hali L.; Flynn, Michael; Wisniewski, Richard; Lee, Jeffery; Jones, Harry; Delzeit, Lance; Shull, Sarah; Sargusingh, Miriam; Beeler, David; Howard, Jeanie;

Space station functional relationships analysis

NASA Technical Reports Server (NTRS)

Tullis, Thomas S.; Bied, Barbra R.

1988-01-01

A systems engineering process is developed to assist Space Station designers to understand the underlying operational system of the facility so that it can be physically arranged and configured to support crew productivity. The study analyzes the operational system proposed for the Space Station in terms of mission functions, crew activities, and functional relationships in order to develop a quantitative model for evaluation of interior layouts, configuration, and traffic analysis for any Station configuration. Development of the model involved identification of crew functions, required support equipment, criteria of assessing functional relationships, and tools for analyzing functional relationship matrices, as well as analyses of crew transition frequency, sequential dependencies, support equipment requirements, potential for noise interference, need for privacy, and overall compatability of functions. The model can be used for analyzing crew functions for the Initial Operating Capability of the Station and for detecting relationships among these functions. Note: This process (FRA) was used during Phase B design studies to test optional layouts of the Space Station habitat module. The process is now being automated as a computer model for use in layout testing of the Space Station laboratory modules during Phase C.

Application of structured analysis to a telerobotic system

NASA Technical Reports Server (NTRS)

Dashman, Eric; Mclin, David; Harrison, F. W.; Soloway, Donald; Young, Steven

1990-01-01

The analysis and evaluation of a multiple arm telerobotic research and demonstration system developed by the NASA Intelligent Systems Research Laboratory (ISRL) is described. Structured analysis techniques were used to develop a detailed requirements model of an existing telerobotic testbed. Performance models generated during this process were used to further evaluate the total system. A commercial CASE tool called Teamwork was used to carry out the structured analysis and development of the functional requirements model. A structured analysis and design process using the ISRL telerobotic system as a model is described. Evaluation of this system focused on the identification of bottlenecks in this implementation. The results demonstrate that the use of structured methods and analysis tools can give useful performance information early in a design cycle. This information can be used to ensure that the proposed system meets its design requirements before it is built.

The identification of complete domains within protein sequences using accurate E-values for semi-global alignment

PubMed Central

Kann, Maricel G.; Sheetlin, Sergey L.; Park, Yonil; Bryant, Stephen H.; Spouge, John L.

2007-01-01

The sequencing of complete genomes has created a pressing need for automated annotation of gene function. Because domains are the basic units of protein function and evolution, a gene can be annotated from a domain database by aligning domains to the corresponding protein sequence. Ideally, complete domains are aligned to protein subsequences, in a ‘semi-global alignment’. Local alignment, which aligns pieces of domains to subsequences, is common in high-throughput annotation applications, however. It is a mature technique, with the heuristics and accurate E-values required for screening large databases and evaluating the screening results. Hidden Markov models (HMMs) provide an alternative theoretical framework for semi-global alignment, but their use is limited because they lack heuristic acceleration and accurate E-values. Our new tool, GLOBAL, overcomes some limitations of previous semi-global HMMs: it has accurate E-values and the possibility of the heuristic acceleration required for high-throughput applications. Moreover, according to a standard of truth based on protein structure, two semi-global HMM alignment tools (GLOBAL and HMMer) had comparable performance in identifying complete domains, but distinctly outperformed two tools based on local alignment. When searching for complete protein domains, therefore, GLOBAL avoids disadvantages commonly associated with HMMs, yet maintains their superior retrieval performance. PMID:17596268

Functional Interface Considerations within an Exploration Life Support System Architecture

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

2016-01-01

As notional life support system (LSS) architectures are developed and evaluated, myriad options must be considered pertaining to process technologies, components, and equipment assemblies. Each option must be evaluated relative to its impact on key functional interfaces within the LSS architecture. A leading notional architecture has been developed to guide the path toward realizing future crewed space exploration goals. This architecture includes atmosphere revitalization, water recovery and management, and environmental monitoring subsystems. Guiding requirements for developing this architecture are summarized and important interfaces within the architecture are discussed. The role of environmental monitoring within the architecture is described.

Control over the strength of connections between modules: a double dissociation between stimulus format and task revealed by Granger causality mapping in fMRI

PubMed Central

Anderson, Britt; Soliman, Sherif; O’Malley, Shannon; Danckert, James; Besner, Derek

2015-01-01

Drawing on theoretical and computational work with the localist dual route reading model and results from behavioral studies, Besner et al. (2011) proposed that the ability to perform tasks that require overriding stimulus-specific defaults (e.g., semantics when naming Arabic numerals, and phonology when evaluating the parity of number words) necessitate the ability to modulate the strength of connections between cognitive modules for lexical representation, semantics, and phonology on a task- and stimulus-specific basis. We used functional magnetic resonance imaging to evaluate this account by assessing changes in functional connectivity while participants performed tasks that did and did not require such stimulus-task default overrides. The occipital region showing the greatest modulation of BOLD signal strength for the two stimulus types was used as the seed region for Granger causality mapping (GCM). Our GCM analysis revealed a region of rostromedial frontal cortex with a crossover interaction. When participants performed tasks that required overriding stimulus type defaults (i.e., parity judgments of number words and naming Arabic numerals) functional connectivity between the occipital region and rostromedial frontal cortex was present. Statistically significant functional connectivity was absent when the tasks were the default for the stimulus type (i.e., parity judgments of Arabic numerals and reading number words). This frontal region (BA 10) has previously been shown to be involved in goal-directed behavior and maintenance of a specific task set. We conclude that overriding stimulus-task defaults requires a modulation of connection strengths between cognitive modules and that the override mechanism predicted from cognitive theory is instantiated by frontal modulation of neural activity of brain regions specialized for sensory processing. PMID:25870571

How the Brain Converts Negative Evaluation into Performance Facilitation.

PubMed

Prévost, Charlotte; Lau, Hakwan; Mobbs, Dean

2018-02-01

Surpassing negative evaluation is a recurrent theme of success stories. Yet, there is little evidence supporting the counterintuitive idea that negative evaluation might not only motivate people, but also enhance performance. To address this question, we designed a task that required participants to decide whether taking up a risky challenge after receiving positive or negative evaluations from independent judges. Participants believed that these evaluations were based on their prior performance on a related task. Results showed that negative evaluation caused a facilitation in performance. Concurrent functional magnetic resonance imaging revealed that the motivating effect of negative evaluation was represented in the insula and striatum, while the performance boost was associated with functional positive connectivity between the insula and a set of brain regions involved in goal-directed behavior and the orienting of attention. These findings provide new insight into the neural representation of negative evaluation-induced facilitation. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Functional integration of automated system databases by means of artificial intelligence

NASA Astrophysics Data System (ADS)

Dubovoi, Volodymyr M.; Nikitenko, Olena D.; Kalimoldayev, Maksat; Kotyra, Andrzej; Gromaszek, Konrad; Iskakova, Aigul

2017-08-01

The paper presents approaches for functional integration of automated system databases by means of artificial intelligence. The peculiarities of turning to account the database in the systems with the usage of a fuzzy implementation of functions were analyzed. Requirements for the normalization of such databases were defined. The question of data equivalence in conditions of uncertainty and collisions in the presence of the databases functional integration is considered and the model to reveal their possible occurrence is devised. The paper also presents evaluation method of standardization of integrated database normalization.

Stochastic derivative-free optimization using a trust region framework

DOE PAGES

Larson, Jeffrey; Billups, Stephen C.

2016-02-17

This study presents a trust region algorithm to minimize a function f when one has access only to noise-corrupted function values f¯. The model-based algorithm dynamically adjusts its step length, taking larger steps when the model and function agree and smaller steps when the model is less accurate. The method does not require the user to specify a fixed pattern of points used to build local models and does not repeatedly sample points. If f is sufficiently smooth and the noise is independent and identically distributed with mean zero and finite variance, we prove that our algorithm produces iterates suchmore » that the corresponding function gradients converge in probability to zero. As a result, we present a prototype of our algorithm that, while simplistic in its management of previously evaluated points, solves benchmark problems in fewer function evaluations than do existing stochastic approximation methods.« less

Developing the snow component of a distributed hydrological model: a step-wise approach based on multi-objective analysis

NASA Astrophysics Data System (ADS)

Dunn, S. M.; Colohan, R. J. E.

1999-09-01

A snow component has been developed for the distributed hydrological model, DIY, using an approach that sequentially evaluates the behaviour of different functions as they are implemented in the model. The evaluation is performed using multi-objective functions to ensure that the internal structure of the model is correct. The development of the model, using a sub-catchment in the Cairngorm Mountains in Scotland, demonstrated that the degree-day model can be enhanced for hydroclimatic conditions typical of those found in Scotland, without increasing meteorological data requirements. An important element of the snow model is a function to account for wind re-distribution. This causes large accumulations of snow in small pockets, which are shown to be important in sustaining baseflows in the rivers during the late spring and early summer, long after the snowpack has melted from the bulk of the catchment. The importance of the wind function would not have been identified using a single objective function of total streamflow to evaluate the model behaviour.

Phase function of a spherical particle when scattering an inhomogeneous electromagnetic plane wave.

PubMed

Frisvad, Jeppe Revall

2018-04-01

In absorbing media, electromagnetic plane waves are most often inhomogeneous. Existing solutions for the scattering of an inhomogeneous plane wave by a spherical particle provide no explicit expressions for the scattering components. In addition, current analytical solutions require evaluation of the complex hypergeometric function F 1 2 for every term of a series expansion. In this work, I develop a simpler solution based on associated Legendre functions with argument zero. It is similar to the solution for homogeneous plane waves but with new explicit expressions for the angular dependency of the far-field scattering components, that is, the phase function. I include recurrence formulas for practical evaluation and provide numerical examples to evaluate how well the new expressions match previous work in some limiting cases. The predicted difference in the scattering phase function due to inhomogeneity is not negligible for light entering an absorbing medium at an oblique angle. The presented theory could thus be useful for predicting scattering behavior in dye-based random lasing and in solar cell absorption enhancement.

Comparative analysis of techniques for evaluating the effectiveness of aircraft computing systems

NASA Technical Reports Server (NTRS)

Hitt, E. F.; Bridgman, M. S.; Robinson, A. C.

1981-01-01

Performability analysis is a technique developed for evaluating the effectiveness of fault-tolerant computing systems in multiphase missions. Performability was evaluated for its accuracy, practical usefulness, and relative cost. The evaluation was performed by applying performability and the fault tree method to a set of sample problems ranging from simple to moderately complex. The problems involved as many as five outcomes, two to five mission phases, permanent faults, and some functional dependencies. Transient faults and software errors were not considered. A different analyst was responsible for each technique. Significantly more time and effort were required to learn performability analysis than the fault tree method. Performability is inherently as accurate as fault tree analysis. For the sample problems, fault trees were more practical and less time consuming to apply, while performability required less ingenuity and was more checkable. Performability offers some advantages for evaluating very complex problems.

Assurance Evaluation for OSS Adoption in a Telco Context

NASA Astrophysics Data System (ADS)

Ardagna, Claudio A.; Banzi, Massimo; Damiani, Ernesto; El Ioini, Nabil; Frati, Fulvio

Software Assurance (SwA) is a complex concept that involves different stages of a software development process and may be defined differently depending on its focus, as for instance software quality, security, or dependability. In Computer Science, the term assurance is referred to all activities necessary to provide enough confidence that a software product will satisfy its users’ functional and non-functional requirements.

Simple and Efficient Numerical Evaluation of Near-Hypersingular Integrals

NASA Technical Reports Server (NTRS)

Fink, Patrick W.; Wilton, Donald R.; Khayat, Michael A.

2007-01-01

Recently, significant progress has been made in the handling of singular and nearly-singular potential integrals that commonly arise in the Boundary Element Method (BEM). To facilitate object-oriented programming and handling of higher order basis functions, cancellation techniques are favored over techniques involving singularity subtraction. However, gradients of the Newton-type potentials, which produce hypersingular kernels, are also frequently required in BEM formulations. As is the case with the potentials, treatment of the near-hypersingular integrals has proven more challenging than treating the limiting case in which the observation point approaches the surface. Historically, numerical evaluation of these near-hypersingularities has often involved a two-step procedure: a singularity subtraction to reduce the order of the singularity, followed by a boundary contour integral evaluation of the extracted part. Since this evaluation necessarily links basis function, Green s function, and the integration domain (element shape), the approach ill fits object-oriented programming concepts. Thus, there is a need for cancellation-type techniques for efficient numerical evaluation of the gradient of the potential. Progress in the development of efficient cancellation-type procedures for the gradient potentials was recently presented. To the extent possible, a change of variables is chosen such that the Jacobian of the transformation cancels the singularity. However, since the gradient kernel involves singularities of different orders, we also require that the transformation leaves remaining terms that are analytic. The terms "normal" and "tangential" are used herein with reference to the source element. Also, since computational formulations often involve the numerical evaluation of both potentials and their gradients, it is highly desirable that a single integration procedure efficiently handles both.

Language disturbance and functioning in first episode psychosis.

PubMed

Roche, Eric; Segurado, Ricardo; Renwick, Laoise; McClenaghan, Aisling; Sexton, Sarah; Frawley, Timothy; Chan, Carol K; Bonar, Maurice; Clarke, Mary

2016-01-30

Language disturbance has a central role in the presentation of psychotic disorders however its relationship with functioning requires further clarification, particularly in first episode psychosis (FEP). Both language disturbance and functioning can be evaluated with clinician-rated and performance-based measures. We aimed to investigate the concurrent association between clinician-rated and performance-based measures of language disturbance and functioning in FEP. We assessed 108 individuals presenting to an Early Intervention in Psychosis Service in Ireland. Formal thought disorder (FTD) dimensions and bizarre idiosyncratic thinking (BIT) were rated with structured assessment tools. Functioning was evaluated with a performance-based instrument, a clinician-rated measure and indicators of real-world functioning. The disorganisation dimension of FTD was significantly associated with clinician-rated measures of occupational and social functioning (Beta=-0.19, P<0.05 and Beta=-0.31, P<0.01, respectively). BIT was significantly associated with the performance-based measure of functioning (Beta=-0.22, P<0.05). Language disturbance was of less value in predicting real-world measures of functioning. Clinician-rated and performance-based assessments of language disturbance are complementary and each has differential associations with functioning. Communication disorders should be considered as a potential target for intervention in FEP, although further evaluation of the longitudinal relationship between language disturbance and functioning should be undertaken. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Telecommunications network optimization

NASA Technical Reports Server (NTRS)

Lee, J.

1979-01-01

Analysis discusses STACOM (state criminal justic communication) network topology program used to design and evaluate digital telecommunications networks STACOM employs ESAU-WILLIAMS technique to search for direct links between system terminations and regional switching center. Inputs include traffic data, terminal locations, and functional requirements.

Methods for evaluating and ranking transportation energy conservation programs

NASA Astrophysics Data System (ADS)

Santone, L. C.

1981-04-01

The energy conservation programs are assessed in terms of petroleum savings, incremental costs to consumers probability of technical and market success, and external impacts due to environmental, economic, and social factors. Three ranking functions and a policy matrix are used to evaluate the programs. The net present value measure which computes the present worth of petroleum savings less the present worth of costs is modified by dividing by the present value of DOE funding to obtain a net present value per program dollar. The comprehensive ranking function takes external impacts into account. Procedures are described for making computations of the ranking functions and the attributes that require computation. Computations are made for the electric vehicle, Stirling engine, gas turbine, and MPG mileage guide program.

Kinetic chain contributions to elbow function and dysfunction in sports.

PubMed

Ben Kibler, W; Sciascia, Aaron

2004-10-01

The elbow functions in throwing and other athletic activities as a link in the kinetic chain of force development, regulation, and transfer. Efficient function, with maximal performance and minimal injury risk, requires optimum activation of all the link in the kinetic chain. Injury is often associated with alterations in force production or regulation capabilities in links that may be distant to the site of injury. Evaluation of injured athletes should include screening examinations for these areas, and treatment and conditioning should also include these areas.

Designing eHealth that Matters via a Multidisciplinary Requirements Development Approach.

PubMed

Van Velsen, Lex; Wentzel, Jobke; Van Gemert-Pijnen, Julia Ewc

2013-06-24

Requirements development is a crucial part of eHealth design. It entails all the activities devoted to requirements identification, the communication of requirements to other developers, and their evaluation. Currently, a requirements development approach geared towards the specifics of the eHealth domain is lacking. This is likely to result in a mismatch between the developed technology and end user characteristics, physical surroundings, and the organizational context of use. It also makes it hard to judge the quality of eHealth design, since it makes it difficult to gear evaluations of eHealth to the main goals it is supposed to serve. In order to facilitate the creation of eHealth that matters, we present a practical, multidisciplinary requirements development approach which is embedded in a holistic design approach for eHealth (the Center for eHealth Research roadmap) that incorporates both human-centered design and business modeling. Our requirements development approach consists of five phases. In the first, preparatory, phase the project team is composed and the overall goal(s) of the eHealth intervention are decided upon. Second, primary end users and other stakeholders are identified by means of audience segmentation techniques and our stakeholder identification method. Third, the designated context of use is mapped and end users are profiled by means of requirements elicitation methods (eg, interviews, focus groups, or observations). Fourth, stakeholder values and eHealth intervention requirements are distilled from data transcripts, which leads to phase five, in which requirements are communicated to other developers using a requirements notation template we developed specifically for the context of eHealth technologies. The end result of our requirements development approach for eHealth interventions is a design document which includes functional and non-functional requirements, a list of stakeholder values, and end user profiles in the form of personas (fictitious end users, representative of a primary end user group). The requirements development approach presented in this article enables eHealth developers to apply a systematic and multi-disciplinary approach towards the creation of requirements. The cooperation between health, engineering, and social sciences creates a situation in which a mismatch between design, end users, and the organizational context can be avoided. Furthermore, we suggest to evaluate eHealth on a feature-specific level in order to learn exactly why such a technology does or does not live up to its expectations.

Slc15a4, a gene required for pDC sensing of TLR ligands, is required to control persistent viral infection.

PubMed

Blasius, Amanda L; Krebs, Philippe; Sullivan, Brian M; Oldstone, Michael B; Popkin, Daniel L

2012-09-01

Plasmacytoid dendritic cells (pDCs) are the major producers of type I IFN in response to viral infection and have been shown to direct both innate and adaptive immune responses in vitro. However, in vivo evidence for their role in viral infection is lacking. We evaluated the contribution of pDCs to acute and chronic virus infection using the feeble mouse model of pDC functional deficiency. We have previously demonstrated that feeble mice have a defect in TLR ligand sensing. Although pDCs were found to influence early cytokine secretion, they were not required for control of viremia in the acute phase of the infection. However, T cell priming was deficient in the absence of functional pDCs and the virus-specific immune response was hampered. Ultimately, infection persisted in feeble mice. We conclude that pDCs are likely required for efficient T cell priming and subsequent viral clearance. Our data suggest that reduced pDC functionality may lead to chronic infection.

The Functional Breakdown Structure (FBS) and Its Relationship to Life Cycle Cost

NASA Technical Reports Server (NTRS)

DeHoff, Bryan; Levack, Danie J. H.; Rhodes, Russell E.

2009-01-01

The Functional Breakdown Structure (FBS) is a structured, modular breakdown of every function that must be addressed to perform a generic mission. It is also usable for any subset of the mission. Unlike a Work Breakdown Structure (WBS), the FBS is a function-oriented tree, not a product-oriented tree. The FBS details not products, but operations or activities that should be performed. The FBS is not tied to any particular architectural implementation because it is a listing of the needed functions, not the elements, of the architecture. The FBS for Space Transportation Systems provides a universal hierarchy of required functions, which include ground and space operations as well as infrastructure - it provides total visibility of the entire mission. By approaching the systems engineering problem from the functional view, instead of the element or hardware view, the SPST has created an exhaustive list of potential requirements which the architecture designers can use to evaluate the completeness of their designs. This is a new approach that will provide full accountability of all functions required to perform the planned mission. It serves as a giant check list to be sure that no functions are omitted, especially in the early architectural design phase. A significant characteristic of a FBS is that if architecture options are compared using this approach, then any missing or redundant elements of each option will be ' identified. Consequently, valid Life Cycle Costs (LCC) comparisons can be made. For example, one architecture option might not need a particular function while another option does. One option may have individual elements to perform each of three functions while another option needs only one element to perform the three functions. Once an architecture has been selected, the FBS will serve as a guide in development of the work breakdown structure, provide visibility of those technologies that need to be further developed to perform required functions, and help identify the personnel skills required to develop and operate the architecture. It also wifi allow the systems engineering activities to totally integrate each discipline to the maximum extent possible and optimize at the total system level, thus avoiding optimizing at the element level (stove-piping). In addition, it furnishes a framework that wifi help prevent over or under specifying requirements because all functions are identified and all elements are aligned to functions.

Operation and performance of the Ciba-Corning 512 coagulation monitor during parabolic flight

NASA Technical Reports Server (NTRS)

Gocke, Robyn; Lloyd, Charles W.; Greenthaner, Nancy K.

1991-01-01

The goal was to assess the functionality and evaluate the procedures and operations required to operate the Ciba-Corning 512 Coagulation Monitor during parabolic flight. This monitor determines the clotting characteristics of blood. The analyzer operates by laser detection of the cessation of blood flow in a capillary channel within a test cartridge. Test simulator results were excellent for both pre-and post-flight. In-flight results were not obtained due to the warm-up time required for the simulator. Since this is an electronic function only, the expected results on the simulator would be the same in zero-g.

Environmental control/life support system for Space Station

NASA Technical Reports Server (NTRS)

Miller, C. W.; Heppner, D. B.; Schubert, F. H.; Dahlhausen, M. J.

1986-01-01

The functional, operational, and design load requirements for the Environmental Control/Life Support System (ECLSS) are described. The ECLSS is divided into two groups: (1) an atmosphere management group and (2) a water and waste management group. The interaction between the ECLSS and the Space Station Habitability System is examined. The cruciform baseline station design, the delta and big T module configuration, and the reference Space Station configuration are evaluated in terms of ECLSS requirements. The distribution of ECLSS equipment in a reference Space Station configuration is studied as a function of initial operating conditions and growth orbit capabilities. The benefits of water electrolysis as a Space Station utility are considered.

Paranoia.Ada: A diagnostic program to evaluate Ada floating-point arithmetic

NASA Technical Reports Server (NTRS)

Hjermstad, Chris

1986-01-01

Many essential software functions in the mission critical computer resource application domain depend on floating point arithmetic. Numerically intensive functions associated with the Space Station project, such as emphemeris generation or the implementation of Kalman filters, are likely to employ the floating point facilities of Ada. Paranoia.Ada appears to be a valuabe program to insure that Ada environments and their underlying hardware exhibit the precision and correctness required to satisfy mission computational requirements. As a diagnostic tool, Paranoia.Ada reveals many essential characteristics of an Ada floating point implementation. Equipped with such knowledge, programmers need not tremble before the complex task of floating point computation.

Serial Scanning and Registration of High Resolution Quantitative Computed Tomography Volume Scans for the Determination of Local Bone Density Changes

NASA Technical Reports Server (NTRS)

Whalen, Robert T.; Napel, Sandy; Yan, Chye H.

1996-01-01

Progress in development of the methods required to study bone remodeling as a function of time is reported. The following topics are presented: 'A New Methodology for Registration Accuracy Evaluation', 'Registration of Serial Skeletal Images for Accurately Measuring Changes in Bone Density', and 'Precise and Accurate Gold Standard for Multimodality and Serial Registration Method Evaluations.'

MSFC Skylab thermal and environmental control system mission evaluation

NASA Technical Reports Server (NTRS)

Hopson, G. D.; Littles, J. W.; Patterson, W. C.

1974-01-01

An evaluation of the performance of the Skylab thermal and environmental control system is presented. Actual performance is compared to design and functional requirements and anomalies and discrepancies and their resolution are discussed. The thermal and environmental control systems performed their intended role. Based on the experience gained in design, development and flight, recommendations are provided which may be beneficial to future system designs.

Removing the barrier to the calculation of activation energies

DOE PAGES

Mesele, Oluwaseun O.; Thompson, Ward H.

2016-10-06

Approaches for directly calculating the activation energy for a chemical reaction from a simulation at a single temperature are explored with applications to both classical and quantum systems. The activation energy is obtained from a time correlation function that can be evaluated from the same molecular dynamics trajectories or quantum dynamics used to evaluate the rate constant itself and thus requires essentially no extra computational work.

Factor analysis for delineation of organ structures, creation of in- and output functions, and standardization of multicenter kinetic modeling

NASA Astrophysics Data System (ADS)

Schiepers, Christiaan; Hoh, Carl K.; Dahlbom, Magnus; Wu, Hsiao-Ming; Phelps, Michael E.

1999-05-01

PET imaging can quantify metabolic processes in-vivo; this requires the measurement of an input function which is invasive and labor intensive. A non-invasive, semi-automated, image based method of input function generation would be efficient, patient friendly, and allow quantitative PET to be applied routinely. A fully automated procedure would be ideal for studies across institutions. Factor analysis (FA) was applied as processing tool for definition of temporally changing structures in the field of view. FA has been proposed earlier, but the perceived mathematical difficulty has prevented widespread use. FA was utilized to delineate structures and extract blood and tissue time-activity-curves (TACs). These TACs were used as input and output functions for tracer kinetic modeling, the results of which were compared with those from an input function obtained with serial blood sampling. Dynamic image data of myocardial perfusion studies with N-13 ammonia, O-15 water, or Rb-82, cancer studies with F-18 FDG, and skeletal studies with F-18 fluoride were evaluated. Correlation coefficients of kinetic parameters obtained with factor and plasma input functions were high. Linear regression usually furnished a slope near unity. Processing time was 7 min/patient on an UltraSPARC. Conclusion: FA can non-invasively generate input functions from image data eliminating the need for blood sampling. Output (tissue) functions can be simultaneously generated. The method is simple, requires no sophisticated operator interaction and has little inter-operator variability. FA is well suited for studies across institutions and standardized evaluations.

Simultaneous evaluation of renal morphology and function in live kidney donors using dynamic magnetic resonance imaging.

PubMed

Artunc, F; Yildiz, S; Rossi, C; Boss, A; Dittmann, H; Schlemmer, H P; Risler, T; Heyne, N

2010-06-01

Evaluation of potential kidney donors requires the assessment of both kidney anatomy and function. In this prospective study, we sought to expand the diagnostic yield of magnetic resonance (MR) by adding functional measurements of glomerular filtration rate (GFR) and split renal function. Between 2007 and 2009, all potential kidney donors presenting to our facility underwent a comprehensive single-stop MR study that included an assessment of anatomy, angiography and functional measurements. GFR was measured after a bolus injection of gadobutrol (4 ml, approximately 0.05 mmol/kg) and calculated from the washout of the signal intensity obtained over the liver. Split renal function was calculated from the increase of signal intensity over the renal cortex. Values were compared to renal scintigraphy with (99m)Tc-DTPA from the same day. The MR investigation was successfully performed in 21 participants. The GFR derived from MR (MR-GFR) correlated well (r = 0.84) with the GFR derived from scintigraphy (DTPA-GFR). The mean value of the paired differences was 4 +/- 13 [SD] ml/min/1.73 m(2) and was not significantly different from zero. The ratio between right and left kidney function was similar with both techniques (1.01 +/- 0.17 with MR and 1.06 +/- 0.12 with scintigraphy, P = 0.20). We demonstrate an MR-based approach to comprehensively evaluate both kidney anatomy and function in a single investigation, thereby facilitating the evaluation of potential kidney donors.

An architecture for a continuous, user-driven, and data-driven application of clinical guidelines and its evaluation.

PubMed

Shalom, Erez; Shahar, Yuval; Lunenfeld, Eitan

2016-02-01

Design, implement, and evaluate a new architecture for realistic continuous guideline (GL)-based decision support, based on a series of requirements that we have identified, such as support for continuous care, for multiple task types, and for data-driven and user-driven modes. We designed and implemented a new continuous GL-based support architecture, PICARD, which accesses a temporal reasoning engine, and provides several different types of application interfaces. We present the new architecture in detail in the current paper. To evaluate the architecture, we first performed a technical evaluation of the PICARD architecture, using 19 simulated scenarios in the preeclampsia/toxemia domain. We then performed a functional evaluation with the help of two domain experts, by generating patient records that simulate 60 decision points from six clinical guideline-based scenarios, lasting from two days to four weeks. Finally, 36 clinicians made manual decisions in half of the scenarios, and had access to the automated GL-based support in the other half. The measures used in all three experiments were correctness and completeness of the decisions relative to the GL. Mean correctness and completeness in the technical evaluation were 1±0.0 and 0.96±0.03 respectively. The functional evaluation produced only several minor comments from the two experts, mostly regarding the output's style; otherwise the system's recommendations were validated. In the clinically oriented evaluation, the 36 clinicians applied manually approximately 41% of the GL's recommended actions. Completeness increased to approximately 93% when using PICARD. Manual correctness was approximately 94.5%, and remained similar when using PICARD; but while 68% of the manual decisions included correct but redundant actions, only 3% of the actions included in decisions made when using PICARD were redundant. The PICARD architecture is technically feasible and is functionally valid, and addresses the realistic continuous GL-based application requirements that we have defined; in particular, the requirement for care over significant time frames. The use of the PICARD architecture in the domain we examined resulted in enhanced completeness and in reduction of redundancies, and is potentially beneficial for general GL-based management of chronic patients. Copyright © 2015 Elsevier Inc. All rights reserved.

Computer program for design and performance analysis of navigation-aid power systems. Program documentation. Volume 1: Software requirements document

NASA Technical Reports Server (NTRS)

Goltz, G.; Kaiser, L. M.; Weiner, H.

1977-01-01

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document establishes the software requirements for the DSPA computer program, discusses the processing that occurs within the program, and defines the necessary interfaces for operation.

A collision detection algorithm for telerobotic arms

NASA Technical Reports Server (NTRS)

Tran, Doan Minh; Bartholomew, Maureen Obrien

1991-01-01

The telerobotic manipulator's collision detection algorithm is described. Its applied structural model of the world environment and template representation of objects is evaluated. Functional issues that are required for the manipulator to operate in a more complex and realistic environment are discussed.

Evaluation and Validation (E&V) Team Public Report. Volume 5

DTIC Science & Technology

1990-10-31

aspects, software engineering practices, etc. The E&V requirements which are developed will be used to guide the E&V technical effort. The currently...interoperability of Ada software engineering environment tools and data. The scope of the CAIS-A includes the functionality affecting transportability that is...requirement that they be CAIS conforming tools or data. That is, for example numerous CIVC data exist on special purpose software currently available

Hardware Development Process for Human Research Facility Applications

NASA Technical Reports Server (NTRS)

Bauer, Liz

2000-01-01

The simple goal of the Human Research Facility (HRF) is to conduct human research experiments on the International Space Station (ISS) astronauts during long-duration missions. This is accomplished by providing integration and operation of the necessary hardware and software capabilities. A typical hardware development flow consists of five stages: functional inputs and requirements definition, market research, design life cycle through hardware delivery, crew training, and mission support. The purpose of this presentation is to guide the audience through the early hardware development process: requirement definition through selecting a development path. Specific HRF equipment is used to illustrate the hardware development paths. The source of hardware requirements is the science community and HRF program. The HRF Science Working Group, consisting of SCientists from various medical disciplines, defined a basic set of equipment with functional requirements. This established the performance requirements of the hardware. HRF program requirements focus on making the hardware safe and operational in a space environment. This includes structural, thermal, human factors, and material requirements. Science and HRF program requirements are defined in a hardware requirements document which includes verification methods. Once the hardware is fabricated, requirements are verified by inspection, test, analysis, or demonstration. All data is compiled and reviewed to certify the hardware for flight. Obviously, the basis for all hardware development activities is requirement definition. Full and complete requirement definition is ideal prior to initiating the hardware development. However, this is generally not the case, but the hardware team typically has functional inputs as a guide. The first step is for engineers to conduct market research based on the functional inputs provided by scientists. CommerCially available products are evaluated against the science requirements as well as modifications needed to meet program requirements. Options are consolidated and the hardware development team reaches a hardware development decision point. Within budget and schedule constraints, the team must decide whether or not to complete the hardware as an in-house, subcontract with vendor, or commercial-off-the-shelf (COTS) development. An in-house development indicates NASA personnel or a contractor builds the hardware at a NASA site. A subcontract development is completed off-site by a commercial company. A COTS item is a vendor product available by ordering a specific part number. The team evaluates the pros and cons of each development path. For example, in-bouse developments utilize existing corporate knowledge regarding bow to build equipment for use in space. However, technical expertise would be required to fully understand the medical equipment capabilities, such as for an ultrasound system. It may require additional time and funding to gain the expertise that commercially exists. The major benefit of subcontracting a hardware development is the product is delivered as an end-item and commercial expertise is utilized. On the other hand, NASA has limited control over schedule delays. The final option of COTS or modified COTS equipment is a compromise between in-house and subcontracts. A vendor product may exist that meets all functional requirements but req uires in-house modifications for successful operation in a space environment. The HRF utilizes equipment developed using all of the paths described: inhouse, subcontract, and modified COTS.

Importance sampling large deviations in nonequilibrium steady states. I.

PubMed

Ray, Ushnish; Chan, Garnet Kin-Lic; Limmer, David T

2018-03-28

Large deviation functions contain information on the stability and response of systems driven into nonequilibrium steady states and in such a way are similar to free energies for systems at equilibrium. As with equilibrium free energies, evaluating large deviation functions numerically for all but the simplest systems is difficult because by construction they depend on exponentially rare events. In this first paper of a series, we evaluate different trajectory-based sampling methods capable of computing large deviation functions of time integrated observables within nonequilibrium steady states. We illustrate some convergence criteria and best practices using a number of different models, including a biased Brownian walker, a driven lattice gas, and a model of self-assembly. We show how two popular methods for sampling trajectory ensembles, transition path sampling and diffusion Monte Carlo, suffer from exponentially diverging correlations in trajectory space as a function of the bias parameter when estimating large deviation functions. Improving the efficiencies of these algorithms requires introducing guiding functions for the trajectories.

Importance sampling large deviations in nonequilibrium steady states. I

NASA Astrophysics Data System (ADS)

Ray, Ushnish; Chan, Garnet Kin-Lic; Limmer, David T.

2018-03-01

Large deviation functions contain information on the stability and response of systems driven into nonequilibrium steady states and in such a way are similar to free energies for systems at equilibrium. As with equilibrium free energies, evaluating large deviation functions numerically for all but the simplest systems is difficult because by construction they depend on exponentially rare events. In this first paper of a series, we evaluate different trajectory-based sampling methods capable of computing large deviation functions of time integrated observables within nonequilibrium steady states. We illustrate some convergence criteria and best practices using a number of different models, including a biased Brownian walker, a driven lattice gas, and a model of self-assembly. We show how two popular methods for sampling trajectory ensembles, transition path sampling and diffusion Monte Carlo, suffer from exponentially diverging correlations in trajectory space as a function of the bias parameter when estimating large deviation functions. Improving the efficiencies of these algorithms requires introducing guiding functions for the trajectories.

Hyperion 5113/A Infrasound Sensor Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merchant, Bion John

2015-09-01

Sandia National Laboratories has tested and evaluated an infrasound sensor, the 5113/A manufactured by Hyperion. These infrasound sensors measure pressure output by a methodology developed by the University of Mississippi. The purpose of the infrasound sensor evaluation was to determine a measured sensitivity, transfer function, power, self-noise, and dynamic range. The 5113/A infrasound sensor is a new revision of the 5000 series intended to meet the infrasound application requirements for use in the International Monitoring System (IMS) of the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO).

The impact of tinnitus upon cognition in adults: A systematic review.

PubMed

Tegg-Quinn, Susan; Bennett, Rebecca J; Eikelboom, Robert H; Baguley, David M

2016-10-01

To systematically review and analyse experimental outcomes of studies exploring the impact of tinnitus upon cognitive function and their implications for clinical management of invasive tinnitus. A systematic and descriptive review. Eighteen studies were identified investigating the impact of tinnitus on cognitive function. The 18 studies evaluated cognitive function using 24 different objective behavioural tests, nine electrophysiological recordings, one oculomotor test, and one self-report questionnaire. The studies spanned 18 years and revealed numerous interactions potentially contributing to the cognitive difficulties frequently reported by people with invasive tinnitus. The studies indicate a clear association between tinnitus and aspects of cognitive function, specifically the executive control of attention. Tinnitus impairs cognitive function by way of impact upon executive control of attention. Clinical management of patients reporting tinnitus and cognitive difficulties requires an understanding of the reciprocal relationship between tinnitus and cognitive function, with additive effects of anxiety, depression, and somatic cognitive bias. Further study is required to establish the impact of advancing age, hearing loss, anxiety, depression tinnitus duration, and distress upon cognitive function in people with invasive tinnitus.

Development of a Virtual Reality Assessment of Everyday Living Skills

PubMed Central

Ruse, Stacy A.; Davis, Vicki G.; Atkins, Alexandra S.; Krishnan, K. Ranga R.; Fox, Kolleen H.; Harvey, Philip D.; Keefe, Richard S.E.

2014-01-01

Cognitive impairments affect the majority of patients with schizophrenia and these impairments predict poor long term psychosocial outcomes.  Treatment studies aimed at cognitive impairment in patients with schizophrenia not only require demonstration of improvements on cognitive tests, but also evidence that any cognitive changes lead to clinically meaningful improvements.  Measures of “functional capacity” index the extent to which individuals have the potential to perform skills required for real world functioning.  Current data do not support the recommendation of any single instrument for measurement of functional capacity.  The Virtual Reality Functional Capacity Assessment Tool (VRFCAT) is a novel, interactive gaming based measure of functional capacity that uses a realistic simulated environment to recreate routine activities of daily living. Studies are currently underway to evaluate and establish the VRFCAT’s sensitivity, reliability, validity, and practicality. This new measure of functional capacity is practical, relevant, easy to use, and has several features that improve validity and sensitivity of measurement of function in clinical trials of patients with CNS disorders. PMID:24798174

Requirements Engineering for inter-organizational health information systems with functions for spatial analyses: modeling a WHO safe community applying Use Case Maps.

PubMed

Olvingson, C; Hallberg, N; Timpka, T; Lindqvist, K

2002-01-01

To evaluate Use Case Maps (UCMs) as a technique for Requirements Engineering (RE) in the development of information systems with functions for spatial analyses in inter-organizational public health settings. In this study, Participatory Action Research (PAR) is used to explore the UCM notation for requirements elicitation and to gather the opinions of the users. The Delphi technique is used to reach consensus in the construction of UCMs. The results show that UCMs can provide a visualization of the system's functionality and in combination with PAR provide a sound basis for gathering requirements in inter-organizational settings. UCMs were found to represent a suitable level for describing the organization and the dynamic flux of information including spatial resolution to all stakeholders. Moreover, by using PAR, the voices of the users and their tacit knowledge is intercepted. Further, UCMs are found useful in generating intuitive requirements by the creation of use cases. With UCMs and PAR it is possible to study the effects of design changes in the general information display and the spatial resolution in the same context. Both requirements on the information system in general and the functions for spatial analyses are possible to elicit when identifying the different responsibilities and the demands on spatial resolution associated to the actions of each administrative unit. However, the development process of UCM is not well documented and needs further investigation and formulation of guidelines.

A General Method for Solving Systems of Non-Linear Equations

NASA Technical Reports Server (NTRS)

Nachtsheim, Philip R.; Deiss, Ron (Technical Monitor)

1995-01-01

The method of steepest descent is modified so that accelerated convergence is achieved near a root. It is assumed that the function of interest can be approximated near a root by a quadratic form. An eigenvector of the quadratic form is found by evaluating the function and its gradient at an arbitrary point and another suitably selected point. The terminal point of the eigenvector is chosen to lie on the line segment joining the two points. The terminal point found lies on an axis of the quadratic form. The selection of a suitable step size at this point leads directly to the root in the direction of steepest descent in a single step. Newton's root finding method not infrequently diverges if the starting point is far from the root. However, the current method in these regions merely reverts to the method of steepest descent with an adaptive step size. The current method's performance should match that of the Levenberg-Marquardt root finding method since they both share the ability to converge from a starting point far from the root and both exhibit quadratic convergence near a root. The Levenberg-Marquardt method requires storage for coefficients of linear equations. The current method which does not require the solution of linear equations requires more time for additional function and gradient evaluations. The classic trade off of time for space separates the two methods.

Representation of the Coulomb Matrix Elements by Means of Appell Hypergeometric Function F 2

NASA Astrophysics Data System (ADS)

Bentalha, Zine el abidine

2018-06-01

Exact analytical representation for the Coulomb matrix elements by means of Appell's double series F 2 is derived. The finite sum obtained for the Appell function F 2 allows us to evaluate explicitly the matrix elements of the two-body Coulomb interaction in the lowest Landau level. An application requiring the matrix elements of Coulomb potential in quantum Hall effect regime is presented.

Evaluation Study of Family Nurse Practitioners in US Army Health Care.

DTIC Science & Technology

1982-01-01

Practitioners: The Family Nurse Practitioner Survey consisted of five parts: (1) Demographic; (2) Attitude Scale; (3) Present Assignment; (4) Role...Demographics; (2) Attitudes ; and (3) Role Functions/Diagnostic Categories. All results are displayed in Appendix 2. The information on the functions/diagnostic...requirements at least at the major Family Practice Departments for the FNP. This attitude is shared by a great majority of the ANC nurse managers queried

Selected considerations of implementation of the GNSS

NASA Astrophysics Data System (ADS)

Cwiklak, Janusz; Fellner, Andrzej; Fellner, Radoslaw; Jafernik, Henryk; Sledzinski, Janusz

2014-05-01

The article describes analysis of the safety and risk for the implementation of precise approach procedures (Localizer Performance and Vertical Guidance - LPV) with GNSS sensor at airports in Warsaw and Katowice. There were used some techniques of the identification of threats (inducing controlled flight into terrain, landing accident, mid-air collision) and evaluations methods based on Fault Tree Analysis, probability of the risk, safety risk evaluation matrix and Functional Hazard Assesment. Also safety goals were determined. Research led to determine probabilities of appearing of threats, as well as allow compare them with regard to the ILS. As a result of conducting the Preliminary System Safety Assessment (PSSA), there were defined requirements essential to reach the required level of the safety. It is worth to underline, that quantitative requirements were defined using FTA.

Prospective assessment of the influence of pancreatic cancer resection on exocrine pancreatic function.

PubMed

Sikkens, E C M; Cahen, D L; de Wit, J; Looman, C W N; van Eijck, C; Bruno, M J

2014-01-01

Exocrine insufficiency frequently develops in patients with pancreatic cancer owing to tumour ingrowth and pancreatic duct obstruction. Surgery might restore this function by removing the primary disease and restoring duct patency, but it may also have the opposite effect, as a result of resection of functional parenchyma and anatomical changes. This study evaluated the course of pancreatic function, before and after pancreatic resection. This prospective cohort study included patients with tumours in the pancreatic region requiring pancreatic resection in a tertiary referral centre between March 2010 and August 2012. Starting before surgery, exocrine function was determined monthly by measuring faecal elastase 1 levels (normal value over 0.200 µg per g faeces). Endocrine function, steatorrhoea-related symptoms and bodyweight were also evaluated before and after surgery. Subjects were followed from diagnosis until 6 months after surgery, or until death. Twenty-nine patients were included, 12 with pancreatic cancer, 14 with ampullary carcinoma and three with bile duct carcinoma (median tumour size 2.6 cm). Twenty-six patients underwent pancreaticoduodenectomy and three distal pancreatectomy. Thirteen patients had exocrine insufficiency at preoperative diagnosis. After a median follow-up of 6 months, this had increased to 24 patients. Diabetes was present in seven patients at diagnosis, and developed in one additional patient within 1 month after surgery. Most patients with tumours in the pancreatic region requiring pancreatic resection either had exocrine insufficiency at diagnosis or became exocrine-insufficient soon after surgical resection. © 2013 BJS Society Ltd. Published by John Wiley & Sons Ltd.

[Benefit of rotational exercises for patients with Meniere's syndrome, method used by the ENT department of St-Luc university clinic].

PubMed

Nyabenda, A; Briart, C; Deggouj, N; Gersdorff, M

2003-12-01

To date, the effectiveness of balanced rehabilitation for patients with Meniere's syndrome has not been unanimously acknowledged by all physicians and physiotherapists. The purpose of this study is to assess the therapeutic efficacy of rotational exercises in the treatment of disequilibrium for patients with unilateral Meniere's syndrome. Rotational stimuli were used to symmetrize and reduce postrotatory nystagmic response. Three reference sources were used to assess the efficacy of this management: vestibulospinal function tests: pre- and post-treatment results at the Romberg test, the Unterberger-Fukuda stepping test, the Babinski-Weil test, and gait testing with eyes closed; rotational tests: pre- and post-treatment results; and the self-perceived impact of vertigo: assessed by the Dizziness Handicap Inventory (DHI) and a scale based on the guidelines of the Japanese Society of Equilibrium Research (JSER, 1993). The JSER scale provides quantitative vertigo evaluation; the DHI reflects the patient's perceptual evaluation of handicap. Patients required 11 sessions (mean value) to attain subjective improvement. Of the 23 patients, only seven required optokinetic stimulation (mean requirement: three sessions). Rotational tests and dynamic tests of the vestibulospinal function improved. The DHI and JSER results show that patients' post-rehabilitation perceptual evaluation significantly improved. The objective and subjective measures of disequilibrium in patients with unilateral Meniere's syndrome were significantly improved.

On the road to bioartificial organs.

PubMed

Ren, X; Ott, H C

2014-10-01

Biological organs are highly orchestrated systems with well-coordinated positioning, grouping, and interaction of different cell types within their specialized extracellular environment. Bioartificial organs are intended to be functional replacements of native organs generated through bioengineering techniques and hold the potential to alleviate donor organ shortage for transplantation. The development, production, and evaluation of such bioartificial organs require synergistic efforts of biology, material science, engineering, and medicine. In this review, we highlight the emerging platforms enabling structured assembly of multiple cell types into functional grafts and discuss recent advances and challenges in the development of bioartificial organs, including cell sources, in vitro organ culture, in vivo evaluation, and clinical considerations.

Evaluating the accuracy of self-report for the diagnosis of HIV-associated neurocognitive disorder (HAND): defining “symptomatic” versus “asymptomatic” HAND

PubMed Central

Obermeit, Lisa C.; Beltran, Jessica; Casaletto, Kaitlin B.; Franklin, Donald R.; Letendre, Scott; Ellis, Ronald; Fennema-Notestine, Christine; Vaida, Florin; Collier, Ann C.; Marra, Christina M.; Clifford, David; Gelman, Benjamin; Sacktor, Ned; Morgello, Susan; Simpson, David; McCutchan, J. Allen; Grant, Igor

2016-01-01

The criteria for differentiating symptomatic from asymptomatic HIV-associated neurocognitive disorder require evaluation of (1) cognitive impairment, (2) daily functioning declines, and (3) whether the functional declines are attributable to cognitive versus physical problems. Many providers rely only on self-report to evaluate these latter criteria. However, the accuracy of patient-provided information may be limited. This study evaluated the validity of self-assessment for HIV-associated neurocognitive disorder (HAND) diagnoses by comparing objective findings with self-report of criteria 2 and 3 above. Self-reports were used to stratify 277 cognitively impaired HIV+ individuals into functionally dependent (n = 159) and independent (n = 118) groups, followed by group comparisons of objective functional problems. The dependent group was then divided into those who self-attributed their functional dependence to only cognitive (n = 80) versus only physical (n = 79) causes, for further comparisons on objective findings. The functionally dependent group was significantly worse than the independent group on all objective disability characteristics except severity of cognitive impairment, while those who attributed their dependence to physical (versus cognitive) factors were similar on all objective physical, cognitive, and functioning variables. Of note, 28 % of physical attributors showed no physical abnormalities on neuromedical examinations. Results suggest that patient report is consistently associated with objective measures of functional loss; in contrast, patient identification of physical versus cognitive causes is poorly associated with objective criteria. These findings caution against relying solely on patient self-report to determine whether functional disability in cognitively impaired HIV+ individuals can be attributed to strictly physical causes. PMID:27557777

Effect of a geriatric consultation team on functional status of elderly hospitalized patients. A randomized, controlled clinical trial.

PubMed

McVey, L J; Becker, P M; Saltz, C C; Feussner, J R; Cohen, H J

1989-01-01

To evaluate the impact of a geriatric consultation team on the functional status of hospitalized elderly patients. Randomized controlled clinical trial. University-affiliated referral Veterans Administration Medical Center. One hundred and seventy-eight hospitalized elderly men 75 years or older admitted to medical, surgical, and psychiatry services, but excluding patients admitted to intensive care units. Eighty-eight intervention group patients received multidimensional evaluation by an interdisciplinary geriatric consultation team composed of a faculty geriatrician, geriatrics fellow, geriatric clinical nurse specialist, and a social worker trained in geriatrics. Results of the evaluation, including problem identification and recommendations, were given to the patients' physicians. Ninety control group patients received only usual care. Intervention and control groups were comparable initially. The major outcome variable was the Index of Independence in the Activities of Daily Living (ADL) (Katz). Thirty-nine percent of the total study population was functionally independent on admission, 27% required assistance with one to three ADL, 22% required assistance with four to six ADL, and 12% were completely dependent. Many patients remained unchanged from admission to discharge: intervention group, 38%; control group, 39%. In the intervention group, 34% improved and 28% declined; in the control group, 26% improved and 36% declined. Although these changes reflected a trend toward greater improvement in the intervention group, the results were not statistically significant. Among elderly patients entering an acute-care hospital, approximately 60% had some degree of, and one third had serious functional disability. Such patients are at risk for further decline during hospitalization. A geriatric consultation team was unable to alter the degree of functional decline. Geriatric units or consultation teams may have to offer direct preventive or restorative services in addition to advice if improvements are to be made.

Transparent Information Systems through Gateways, Front Ends, Intermediaries, and Interfaces.

ERIC Educational Resources Information Center

Williams, Martha E.

1986-01-01

Provides overview of design requirements for transparent information retrieval (implies that user sees through complexity of retrieval activities sequence). Highlights include need for transparent systems; history of transparent retrieval research; information retrieval functions (automated converters, routers, selectors, evaluators/analyzers);…

An audit of the laboratory service provided to the Health Service Executive Orthodontic Department, St James Hospital, Dublin.

PubMed

Al-Awadhi, E A; Wolstencroft, S J; Blake, M

2006-01-01

To evaluate the service purchased from contracted orthodontic laboratories used by HSE (SWA) regional orthodontic unit, St. James's Hospital, Dublin and identify deficiencies in the current service. A data collection questionnaire was designed and distributed to the departmental orthodontists for a period of three months (October-December 2004). Gold standards, drawn up based on the authors' ideal requirements and published guidelines, were supplied to grade the work returned. During the study period 363 items of laboratory work were requested. 20% of the laboratory work arrived late and most of the delayed work was delayed for more than 24 hours. Most laboratory delays occurred with functional appliances, retainers and study models. Prior to fit, 20% of the appliances required adjustments for more than 30 seconds. 65% of laboratory work returned to the department met all of the gold standards. 10% of appliances were considered unsatisfactory. Functional appliances were most often ill fitting accounting for almost half of the unsatisfactory laboratory work. The majority of the laboratory work returned to the department met our gold standards and arrived on time. Forty six percent of the appliances required adjustments. Functional appliances required the most adjustments; one in five of all functional appliances ordered were considered unsatisfactory.

First steps in designing an all-in-one ICT-based device for persons with cognitive impairment: evaluation of the first mock-up.

PubMed

Boman, Inga-Lill; Persson, Ann-Christine; Bartfai, Aniko

2016-03-07

This project Smart Assisted Living involving Informal careGivers++ (SALIG) intends to develop an ICT-based device for persons with cognitive impairment combined with remote support possibilities for significant others and formal caregivers. This paper presents the identification of the target groups' needs and requirements of such device and the evaluation of the first mock-up, demonstrated in a tablet. The inclusive design method that includes end-users in the design process was chosen. First, a scoping review was conducted in order to examine the target group's need of an ICT-based device, and to gather recommendations regarding its design and functionalities. In order to capture the users' requirements of the design and functionalities of the device three targeted focus groups were conducted. Based on the findings from the publications and the focus groups a user requirement specification was developed. After that a design concept and a first mock-up was developed in an iterative process. The mock-up was evaluated through interviews with persons with cognitive impairment, health care professionals and significant others. Data were analysed using content analysis. Several useful recommendations of the design and functionalities of the SALIG device for persons with cognitive impairment were identified. The main benefit of the mock-up was that it was a single device with a set of functionalities installed on a tablet and designed for persons with cognitive impairment. An additional benefit was that it could be used remotely by significant others and formal caregivers. The SALIG device has the potentials to facilitate everyday life for persons with cognitive impairment, their significant others and the work situation for formal caregivers. The results may provide guidance in the development of different types of technologies for the target population and for people with diverse disabilities. Further work will focus on developing a prototype to be empirically tested by persons with cognitive impairment, their significant others and formal caregivers.

Development of the IMB Model and an Evidence-Based Diabetes Self-management Mobile Application.

PubMed

Jeon, Eunjoo; Park, Hyeoun-Ae

2018-04-01

This study developed a diabetes self-management mobile application based on the information-motivation-behavioral skills (IMB) model, evidence extracted from clinical practice guidelines, and requirements identified through focus group interviews (FGIs) with diabetes patients. We developed a diabetes self-management (DSM) app in accordance with the following four stages of the system development life cycle. The functional and knowledge requirements of the users were extracted through FGIs with 19 diabetes patients. A system diagram, data models, a database, an algorithm, screens, and menus were designed. An Android app and server with an SSL protocol were developed. The DSM app algorithm and heuristics, as well as the usability of the DSM app were evaluated, and then the DSM app was modified based on heuristics and usability evaluation. A total of 11 requirement themes were identified through the FGIs. Sixteen functions and 49 knowledge rules were extracted. The system diagram consisted of a client part and server part, 78 data models, a database with 10 tables, an algorithm, and a menu structure with 6 main menus, and 40 user screens were developed. The DSM app was Android version 4.4 or higher for Bluetooth connectivity. The proficiency and efficiency scores of the algorithm were 90.96% and 92.39%, respectively. Fifteen issues were revealed through the heuristic evaluation, and the app was modified to address three of these issues. It was also modified to address five comments received by the researchers through the usability evaluation. The DSM app was developed based on behavioral change theory through IMB models. It was designed to be evidence-based, user-centered, and effective. It remains necessary to fully evaluate the effect of the DSM app on the DSM behavior changes of diabetes patients.

Development of the IMB Model and an Evidence-Based Diabetes Self-management Mobile Application

PubMed Central

Jeon, Eunjoo

2018-01-01

Objectives This study developed a diabetes self-management mobile application based on the information-motivation-behavioral skills (IMB) model, evidence extracted from clinical practice guidelines, and requirements identified through focus group interviews (FGIs) with diabetes patients. Methods We developed a diabetes self-management (DSM) app in accordance with the following four stages of the system development life cycle. The functional and knowledge requirements of the users were extracted through FGIs with 19 diabetes patients. A system diagram, data models, a database, an algorithm, screens, and menus were designed. An Android app and server with an SSL protocol were developed. The DSM app algorithm and heuristics, as well as the usability of the DSM app were evaluated, and then the DSM app was modified based on heuristics and usability evaluation. Results A total of 11 requirement themes were identified through the FGIs. Sixteen functions and 49 knowledge rules were extracted. The system diagram consisted of a client part and server part, 78 data models, a database with 10 tables, an algorithm, and a menu structure with 6 main menus, and 40 user screens were developed. The DSM app was Android version 4.4 or higher for Bluetooth connectivity. The proficiency and efficiency scores of the algorithm were 90.96% and 92.39%, respectively. Fifteen issues were revealed through the heuristic evaluation, and the app was modified to address three of these issues. It was also modified to address five comments received by the researchers through the usability evaluation. Conclusions The DSM app was developed based on behavioral change theory through IMB models. It was designed to be evidence-based, user-centered, and effective. It remains necessary to fully evaluate the effect of the DSM app on the DSM behavior changes of diabetes patients. PMID:29770246

Development of transportable wheelchair design criteria using computer crash simulation.

PubMed

Bertocci, G E; Hobson, D A; Digges, K H

1996-09-01

The Americans with Disabilities Act (ADA) has led to an increase in disabled travelers, many of whom are unable to transfer to a vehicle seat and are required to use their wheelchair to fulfill this function. ANSI/RESNA is currently developing a transportable wheelchair standard which will identify design requirements and testing methods for wheelchairs suitable for transport. Wheelchair manufacturers should begin to modify their existing design criteria established for a normal mobility function to design criteria appropriate for a transportation function which may subject the wheelchair to large dynamic crash forces. A thorough understanding of the crash environment and its effect on the wheelchair is necessary to insure the safety of the wheelchair user. To assist manufacturers in the design effort, this study uses mathematical crash simulations to evaluate loads imposed upon a wheelchair when subjected to a 48 kph/20 g frontal crash. Using a four-point belt tiedown system to secure the wheelchair, securement point, seat, lap belt anchor, and wheel loads are evaluated under three different securement configurations. Results show that positioning of rear securement points near the wheelchair center of gravity can serve as an effective strategy for managing crash response and loadings on the wheelchair. Force ranges for each of the evaluated parameters, derived for a 50th percentile male using a simulated power wheelchair, are provided for use as a preliminary guide when designing transportable wheelchairs.

Precision Stellar Catalogs and the Role of Anomalous Refraction.

DTIC Science & Technology

1978-01-01

program to evaluate the use of Two Color Refractometry (TCR) for the determination of precise stel- lar positions is discussed. Various aspects of...Display Control Console Most of the electronic subsystems which are required to perform the various functions for the Two Color Refractometry are...development of the Two-Color Refractometry System. To this end, we are performing Two-Color Refractometry evaluations on components similar to those to be

An evolving-requirements technology assessment process for advanced propulsion concepts

NASA Astrophysics Data System (ADS)

McClure, Erin Kathleen

The following dissertation investigates the development of a methodology suitable for the evaluation of advanced propulsion concepts. At early stages of development, both the future performance of these concepts and their requirements are highly uncertain, making it difficult to forecast their future value. Developing advanced propulsion concepts requires a huge investment of resources. The methodology was developed to enhance the decision-makers understanding of the concepts, so that they could mitigate the risks associated with developing such concepts. A systematic methodology to identify potential advanced propulsion concepts and assess their robustness is necessary to reduce the risk of developing advanced propulsion concepts. Existing advanced design methodologies have evaluated the robustness of technologies or concepts to variations in requirements, but they are not suitable to evaluate a large number of dissimilar concepts. Variations in requirements have been shown to impact the development of advanced propulsion concepts, and any method designed to evaluate these concepts must incorporate the possible variations of the requirements into the assessment. In order to do so, a methodology was formulated to be capable of accounting for two aspects of the problem. First, it had to systemically identify a probabilistic distribution for the future requirements. Such a distribution would allow decision-makers to quantify the uncertainty introduced by variations in requirements. Second, the methodology must be able to assess the robustness of the propulsion concepts as a function of that distribution. This dissertation describes in depth these enabling elements and proceeds to synthesize them into a new method, the Evolving Requirements Technology Assessment (ERTA). As a proof of concept, the ERTA method was used to evaluate and compare advanced propulsion systems that will be capable of powering a hurricane tracking, High Altitude, Long Endurance (HALE) unmanned aerial vehicle (UAV). The use of the ERTA methodology to assess HALE UAV propulsion concepts demonstrated that potential variations in requirements do significantly impact the assessment and selection of propulsion concepts. The proof of concept also demonstrated that traditional forecasting techniques, such as the cross impact analysis, could be used to forecast the requirements for advanced propulsion concepts probabilistically. "Fitness", a measure of relative goodness, was used to evaluate the concepts. Finally, stochastic optimizations were used to evaluate the propulsion concepts across the range of requirement sets that were considered.

Theoretical Study on the Mechanics of the Conjunct Gnatoprothetic Devices in the Context of Occlusive Function Rehabilitation

PubMed Central

POPESCU, M.R.; TRANĂ, F.; MANOLEA, H.; RAUTEN, ANE-MARIE; ȘURLIN, PETRA; DRAGOMIR, L.P.

2014-01-01

The partially intercalated edentation offers the practitioner the possibility of the functional rehabilitation of the dental arcades through conjunct gnato-prosthetic devices. The functions of the dento-maxilar device, disturbed by the presence of edentation, require a treatment approach so that, without pre-planning or estimating, the result can lead most of the times to failure in terms of functionality. Clinical evaluation associated with pre- and proprosthetic treatment can also impose, in some situations the evaluation of the dental units involved in prosthetic rehabilitation. The association and implementation of the prosthetic construction in the occlusive-articular ensemble, as well as the counterbalancing of the mastication forces per dental unit and whole interarch system, linked to the distribution of the forces at the level of the pillar teeth and prosthetic construction, represent the goal of this theoretical study. PMID:25729593

Theoretical study on the mechanics of the conjunct gnatoprothetic devices in the context of occlusive function rehabilitation.

PubMed

Popescu, M R; Trană, F; Manolea, H; Rauten, Ane-Marie; Șurlin, Petra; Dragomir, L P

2014-01-01

The partially intercalated edentation offers the practitioner the possibility of the functional rehabilitation of the dental arcades through conjunct gnato-prosthetic devices. The functions of the dento-maxilar device, disturbed by the presence of edentation, require a treatment approach so that, without pre-planning or estimating, the result can lead most of the times to failure in terms of functionality. Clinical evaluation associated with pre- and proprosthetic treatment can also impose, in some situations the evaluation of the dental units involved in prosthetic rehabilitation. The association and implementation of the prosthetic construction in the occlusive-articular ensemble, as well as the counterbalancing of the mastication forces per dental unit and whole interarch system, linked to the distribution of the forces at the level of the pillar teeth and prosthetic construction, represent the goal of this theoretical study.

An efficient soil water balance model based on hybrid numerical and statistical methods

NASA Astrophysics Data System (ADS)

Mao, Wei; Yang, Jinzhong; Zhu, Yan; Ye, Ming; Liu, Zhao; Wu, Jingwei

2018-04-01

Most soil water balance models only consider downward soil water movement driven by gravitational potential, and thus cannot simulate upward soil water movement driven by evapotranspiration especially in agricultural areas. In addition, the models cannot be used for simulating soil water movement in heterogeneous soils, and usually require many empirical parameters. To resolve these problems, this study derives a new one-dimensional water balance model for simulating both downward and upward soil water movement in heterogeneous unsaturated zones. The new model is based on a hybrid of numerical and statistical methods, and only requires four physical parameters. The model uses three governing equations to consider three terms that impact soil water movement, including the advective term driven by gravitational potential, the source/sink term driven by external forces (e.g., evapotranspiration), and the diffusive term driven by matric potential. The three governing equations are solved separately by using the hybrid numerical and statistical methods (e.g., linear regression method) that consider soil heterogeneity. The four soil hydraulic parameters required by the new models are as follows: saturated hydraulic conductivity, saturated water content, field capacity, and residual water content. The strength and weakness of the new model are evaluated by using two published studies, three hypothetical examples and a real-world application. The evaluation is performed by comparing the simulation results of the new model with corresponding results presented in the published studies, obtained using HYDRUS-1D and observation data. The evaluation indicates that the new model is accurate and efficient for simulating upward soil water flow in heterogeneous soils with complex boundary conditions. The new model is used for evaluating different drainage functions, and the square drainage function and the power drainage function are recommended. Computational efficiency of the new model makes it particularly suitable for large-scale simulation of soil water movement, because the new model can be used with coarse discretization in space and time.

Human factors evaluation of teletherapy: Function and task analysis. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaye, R.D.; Henriksen, K.; Jones, R.

1995-07-01

As a treatment methodology, teletherapy selectively destroys cancerous and other tissue by exposure to an external beam of ionizing radiation. Sources of radiation are either a radioactive isotope, typically Cobalt-60 (Co-60), or a linear accelerator. Records maintained by the NRC have identified instances of teletherapy misadministration where the delivered radiation dose has differed from the radiation prescription (e.g., instances where fractions were delivered to the wrong patient, to the wrong body part, or were too great or too little with respect to the defined treatment volume). Both human error and machine malfunction have led to misadministrations. Effective and safe treatmentmore » requires a concern for precision and consistency of human-human and human-machine interactions throughout the course of therapy. The present study is the first part of a series of human factors evaluations for identifying the root causes that lead to human error in the teletherapy environment. The human factors evaluations included: (1) a function and task analysis of teletherapy activities, (2) an evaluation of the human-system interfaces, (3) an evaluation of procedures used by teletherapy staff, (4) an evaluation of the training and qualifications of treatment staff (excluding the oncologists), (5) an evaluation of organizational practices and policies, and (6) an identification of problems and alternative approaches for NRC and industry attention. The present report addresses the function and task analysis of teletherapy activities and provides the foundation for the conduct of the subsequent evaluations. The report includes sections on background, methodology, a description of the function and task analysis, and use of the task analysis findings for the subsequent tasks. The function and task analysis data base also is included.« less

Clinical and Organizational Factors in the Initial Evaluation of Patients With Lung Cancer

PubMed Central

Jim Yeung, Sai-Ching; Tanoue, Lynn T.; Gould, Michael K.

2013-01-01

Background: This guideline is intended to provide an evidence-based approach to the initial evaluation of patients with known or suspected lung cancer. It also includes an assessment of the impact of timeliness of care and multidisciplinary teams on outcome. Methods: The applicable current medical literature was identified by a computerized search and evaluated using standardized methods. Recommendations were framed using the approach described by the Guidelines Oversight Committee of the American College of Chest Physicians. Data sources included MEDLINE and the Cochrane Database of Systematic Reviews. Results: Initial evaluation should include a thorough history and physical examination; CT imaging; pulmonary function tests; and hemoglobin, electrolyte, liver function, and calcium levels. Additional testing for distant metastases and paraneoplastic syndromes should be determined on the basis of these results. Paraneoplastic syndromes may have an adverse impact on cancer treatment, so they should be controlled rapidly with the goal of proceeding with definitive cancer treatment in a timely manner. Although the relationship between timeliness of care and survival is difficult to quantify, efforts to deliver timely care are reasonable and should be balanced with the need to attend to other dimensions of health-care quality (eg, safety, effectiveness, efficiency, equality, consistency with patient values and preferences). Quality care will require multiple disciplines. Although it is difficult to assess the impact, we suggest that a multidisciplinary team approach to care be used, particularly for patients requiring multimodality therapy. Conclusions: The initial evaluation of patients with lung cancer should include a thorough history and physical examination, pulmonary function tests, CT imaging, basic laboratory tests, and selective testing for distant metastases and paraneoplastic syndromes. PMID:23649435

Safety in numbers 4: The relationship between exposure to authentic and didactic environments and nursing students' learning of medication dosage calculation problem solving knowledge and skills.

PubMed

Weeks, Keith W; Clochesy, John M; Hutton, B Meriel; Moseley, Laurie

2013-03-01

Advancing the art and science of education practice requires a robust evaluation of the relationship between students' exposure to learning and assessment environments and the development of their cognitive competence (knowing that and why) and functional competence (know-how and skills). Healthcare education translation research requires specific education technology assessments and evaluations that consist of quantitative analyses of empirical data and qualitative evaluations of the lived student experience of the education journey and schemata construction (Weeks et al., 2013a). This paper focuses on the outcomes of UK PhD and USA post-doctorate experimental research. We evaluated the relationship between exposure to traditional didactic methods of education, prototypes of an authentic medication dosage calculation problem-solving (MDC-PS) environment and nursing students' construction of conceptual and calculation competence in medication dosage calculation problem-solving skills. Empirical outcomes from both UK and USA programmes of research identified highly significant differences in the construction of conceptual and calculation competence in MDC-PS following exposure to the authentic learning environment to that following exposure to traditional didactic transmission methods of education (p < 0.001). This research highlighted that for many students exposure to authentic learning environments is an essential first step in the development of conceptual and calculation competence and relevant schemata construction (internal representations of the relationship between the features of authentic dosage problems and calculation functions); and how authentic environments more ably support all cognitive (learning) styles in mathematics than traditional didactic methods of education. Functional competence evaluations are addressed in Macdonald et al. (2013) and Weeks et al. (2013e). Copyright © 2012. Published by Elsevier Ltd.

The Development of a Taxonomy of the Life Skills Required to Become a Balanced Self-Determined Person = Essaie de Classification des Competences Necessaires pour Devenir une Personne Autonome et Bien Equilibree.

ERIC Educational Resources Information Center

Smith, Paul

Intended for use by life skills coaches and students, program evaluators, and individuals developing lesson plans and other training materials, this taxonomy includes all of the terminal performance behaviors and corresponding sub-skills required to become and function as a balanced, self-determined person who manages the problems of everyday life…

Chronic kidney disease: Pathological and functional evaluation with intravoxel incoherent motion diffusion-weighted imaging.

PubMed

Mao, Wei; Zhou, Jianjun; Zeng, Mengsu; Ding, Yuqin; Qu, Lijie; Chen, Caizhong; Ding, Xiaoqiang; Wang, Yaqiong; Fu, Caixia

2018-05-01

Because chronic kidney disease (CKD) is a worldwide problem, accurate pathological and functional evaluation is required for planning treatment and follow-up. Intravoxel incoherent motion diffusion-weighted imaging (IVIM-DWI) can assess both capillary perfusion and tissue diffusion and may be helpful in evaluating renal function and pathology. To evaluate functional and pathological alterations in CKD by applying IVIM-DWI. Prospective study. In all, 72 CKD patients who required renal biopsy and 20 healthy volunteers. 1.5T. All subjects underwent IVIM-DWI of the kidneys, and image analysis was performed by two radiologists. The mean values of true diffusion coefficient (D), pseudo diffusion coefficient (D*), and perfusion fraction (f) were acquired from renal parenchyma. Correlation between IVIM-DWI parameters and estimated glomerular filtration rate (eGFR), as well as pathological damage, were assessed. One-way analysis of variance (ANOVA), paired sample t-test and Spearman correlation analysis. The paired sample t-test revealed that IVIM-DWI parameters were significantly lower in medulla than cortex for both patients and controls (P < 0.01). Regardless of whether eGFR was reduced, ANOVA revealed that f values of renal parenchyma were significantly lower in patients than controls (P < 0.05). Spearman correlation analysis revealed that there were positive correlations between eGFR and D (cortex, r = 0.466, P < 0.001; medulla, r = 0.491, P < 0.001), and between eGFR and f (cortex, r = 0.713, P < 0.001; medulla, r = 0.512, P < 0.001). Negative correlations were found between f and glomerular injury (cortex, r = -0.773, P < 0.001; medulla, r = -0.629, P < 0.001), and between f and tubulointerstitial lesion (cortex, r = -0.728, P < 0.001; medulla, r = -0.547, P < 0.001). IVIM-DWI might be feasible for noninvasive evaluation of renal function and pathology of CKD, especially in detection of renal insufficiency at an early stage. 1 Technical Efficacy: Stage 3 J. Magn. Reson. Imaging 2018;47:1251-1259. © 2017 International Society for Magnetic Resonance in Medicine.

The effectiveness of home hand exercise programmes in rheumatoid arthritis: a systematic review.

PubMed

Hammond, Alison; Prior, Yeliz

2016-09-01

Rheumatoid arthritis (RA) commonly reduces hand function. We systematically reviewed trials to investigate effects of home hand exercise programmes on hand symptoms and function in RA. We searched: Medline (1946-), AMED, CINAHL, Physiotherapy Evidence Database, OT Seeker, the Cochrane Library, ISI Web of Science from inception to January 2016. Nineteen trials were evaluated. Only three were randomized controlled trials with a low risk of bias (n = 665). Significant short-term improvements occurred in hand function, pain and grip strength, with long-term improvements in hand and upper limb function and pinch strength. Heterogeneity of outcome measures meant meta-analysis was not possible. Evaluation of low and moderate risk of bias trials indicated high-intensity home hand exercise programmes led to better short-term outcomes than low-intensity programmes. Such programmes are cost-effective. Further research is required to evaluate methods of helping people with RA maintain long-term home hand exercise. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The cell engineering construction and function evaluation of multi-layer biochip dialyzer.

PubMed

Zhu, Wen; Li, Jiwei; Liu, Jianfeng

2013-10-01

We report the fabrication and function evaluation of multi-layer biochip dialyzer. Such device may potentially be applied to the wearable hemodialysis systems. By merging the advantages of microfluidic chip technology with cell engineering, both functions of glomerular filtration and renal tubule physiological activity are integrated in the same device. This device is designed into a laminated structure, in which the chip number of the superimposed layer can be arbitrarily tailored in accordance with the requirements of dialysis capacity. We propose that such structure can overcome the obstacles of large size and detached structure of the traditional hollow fiber dialyzer. To construct this multilayer biochips dialyzer, two types of dialyzer device with two-layered and six-layered chips are assembled, respectively. Cell adhesion and proliferation on three different dialysis membrane materials under static and dynamic conditions are investigated and compared. The filtration capability, re-absorption function and excrete ammonia function of the resulting multi-layer biochip dialyzer are evaluated. The results reveal that the constructed device can perform higher filtration efficiency and also play a role of renal tubule. This methodology may be useful in developing "scaling down" artificial kidneys that can act as wearable or even implantable hemodialysis systems.

Lawn mower injuries of the pediatric foot and ankle: observations on prevention and management.

PubMed

Vosburgh, C L; Gruel, C R; Herndon, W A; Sullivan, J A

1995-01-01

We reviewed 32 children with lower extremity injuries caused by power lawn mowers. Functional outcome of 21 patients was evaluated. Anatomical injury patterns provide some guidelines in management and prediction of functional outcome. Consistently, the most severe injuries result from ride-on mowers and wounds to the posterior/plantar foot and ankle. Our experience with pediatric foot and ankle lawn mower injuries permits recommendations for maximum functional outcome with minimal intervention. Public awareness and mower safety devices may be required to decrease the rate of accidents in the future.

Variational Calculations of Ro-Vibrational Energy Levels and Transition Intensities for Tetratomic Molecules

NASA Technical Reports Server (NTRS)

Schwenke, David W.; Langhoff, Stephen R. (Technical Monitor)

1995-01-01

A description is given of an algorithm for computing ro-vibrational energy levels for tetratomic molecules. The expressions required for evaluating transition intensities are also given. The variational principle is used to determine the energy levels and the kinetic energy operator is simple and evaluated exactly. The computational procedure is split up into the determination of one dimensional radial basis functions, the computation of a contracted rotational-bending basis, followed by a final variational step coupling all degrees of freedom. An angular basis is proposed whereby the rotational-bending contraction takes place in three steps. Angular matrix elements of the potential are evaluated by expansion in terms of a suitable basis and the angular integrals are given in a factorized form which simplifies their evaluation. The basis functions in the final variational step have the full permutation symmetries of the identical particles. Sample results are given for HCCH and BH3.

Aerodynamic optimization of supersonic compressor cascade using differential evolution on GPU

NASA Astrophysics Data System (ADS)

Aissa, Mohamed Hasanine; Verstraete, Tom; Vuik, Cornelis

2016-06-01

Differential Evolution (DE) is a powerful stochastic optimization method. Compared to gradient-based algorithms, DE is able to avoid local minima but requires at the same time more function evaluations. In turbomachinery applications, function evaluations are performed with time-consuming CFD simulation, which results in a long, non affordable, design cycle. Modern High Performance Computing systems, especially Graphic Processing Units (GPUs), are able to alleviate this inconvenience by accelerating the design evaluation itself. In this work we present a validated CFD Solver running on GPUs, able to accelerate the design evaluation and thus the entire design process. An achieved speedup of 20x to 30x enabled the DE algorithm to run on a high-end computer instead of a costly large cluster. The GPU-enhanced DE was used to optimize the aerodynamics of a supersonic compressor cascade, achieving an aerodynamic loss minimization of 20%.

Aerodynamic optimization of supersonic compressor cascade using differential evolution on GPU

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aissa, Mohamed Hasanine; Verstraete, Tom; Vuik, Cornelis

Differential Evolution (DE) is a powerful stochastic optimization method. Compared to gradient-based algorithms, DE is able to avoid local minima but requires at the same time more function evaluations. In turbomachinery applications, function evaluations are performed with time-consuming CFD simulation, which results in a long, non affordable, design cycle. Modern High Performance Computing systems, especially Graphic Processing Units (GPUs), are able to alleviate this inconvenience by accelerating the design evaluation itself. In this work we present a validated CFD Solver running on GPUs, able to accelerate the design evaluation and thus the entire design process. An achieved speedup of 20xmore » to 30x enabled the DE algorithm to run on a high-end computer instead of a costly large cluster. The GPU-enhanced DE was used to optimize the aerodynamics of a supersonic compressor cascade, achieving an aerodynamic loss minimization of 20%.« less

HPC in a HEP lab: lessons learned from setting up cost-effective HPC clusters

NASA Astrophysics Data System (ADS)

Husejko, Michal; Agtzidis, Ioannis; Baehler, Pierre; Dul, Tadeusz; Evans, John; Himyr, Nils; Meinhard, Helge

2015-12-01

In this paper we present our findings gathered during the evaluation and testing of Windows Server High-Performance Computing (Windows HPC) in view of potentially using it as a production HPC system for engineering applications. The Windows HPC package, an extension of Microsofts Windows Server product, provides all essential interfaces, utilities and management functionality for creating, operating and monitoring a Windows-based HPC cluster infrastructure. The evaluation and test phase was focused on verifying the functionalities of Windows HPC, its performance, support of commercial tools and the integration with the users work environment. We describe constraints imposed by the way the CERN Data Centre is operated, licensing for engineering tools and scalability and behaviour of the HPC engineering applications used at CERN. We will present an initial set of requirements, which were created based on the above constraints and requests from the CERN engineering user community. We will explain how we have configured Windows HPC clusters to provide job scheduling functionalities required to support the CERN engineering user community, quality of service, user- and project-based priorities, and fair access to limited resources. Finally, we will present several performance tests we carried out to verify Windows HPC performance and scalability.

Accelerated Time-Domain Modeling of Electromagnetic Pulse Excitation of Finite-Length Dissipative Conductors over a Ground Plane via Function Fitting and Recursive Convolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campione, Salvatore; Warne, Larry K.; Sainath, Kamalesh

In this report we overview the fundamental concepts for a pair of techniques which together greatly hasten computational predictions of electromagnetic pulse (EMP) excitation of finite-length dissipative conductors over a ground plane. In a time- domain, transmission line (TL) model implementation, predictions are computationally bottlenecked time-wise, either for late-time predictions (about 100ns-10000ns range) or predictions concerning EMP excitation of long TLs (order of kilometers or more ). This is because the method requires a temporal convolution to account for the losses in the ground. Addressing this to facilitate practical simulation of EMP excitation of TLs, we first apply a techniquemore » to extract an (approximate) complex exponential function basis-fit to the ground/Earth's impedance function, followed by incorporating this into a recursion-based convolution acceleration technique. Because the recursion-based method only requires the evaluation of the most recent voltage history data (versus the entire history in a "brute-force" convolution evaluation), we achieve necessary time speed- ups across a variety of TL/Earth geometry/material scenarios. Intentionally Left Blank« less

Developing Electronic Institutional Portfolios for Program and Institutional Assessment.

ERIC Educational Resources Information Center

Borden, Victor M. H.

2002-01-01

Summarizes the lessons learned by the institutions participating in the Urban Universities Portfolio Project regarding the functional and technological requirements for creating and sustaining Web-based institutional portfolios. The most pressing issues were those of aligning technology resources with analytical, evaluative, academic, and design…

Plastics in Building.

ERIC Educational Resources Information Center

Skeist, Irving, Ed.

The evaluation and use of plastics in the construction industry are explained. The contributors offer extensive, timely, and thoroughly researched data on the chemistry, properties, functions, engineering behavior, and specific applications of plastics to building requirements. The major subjects discussed in depth are--(1) the role of plastics in…

10 CFR 54.4 - Scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... COMMISSION (CONTINUED) REQUIREMENTS FOR RENEWAL OF OPERATING LICENSES FOR NUCLEAR POWER PLANTS General Provisions § 54.4 Scope. (a) Plant systems, structures, and components within the scope of this part are— (1..., and components relied on in safety analyses or plant evaluations to perform a function that...

10 CFR 54.4 - Scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... COMMISSION (CONTINUED) REQUIREMENTS FOR RENEWAL OF OPERATING LICENSES FOR NUCLEAR POWER PLANTS General Provisions § 54.4 Scope. (a) Plant systems, structures, and components within the scope of this part are— (1..., and components relied on in safety analyses or plant evaluations to perform a function that...

10 CFR 54.4 - Scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... COMMISSION (CONTINUED) REQUIREMENTS FOR RENEWAL OF OPERATING LICENSES FOR NUCLEAR POWER PLANTS General Provisions § 54.4 Scope. (a) Plant systems, structures, and components within the scope of this part are— (1..., and components relied on in safety analyses or plant evaluations to perform a function that...

10 CFR 54.4 - Scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... COMMISSION (CONTINUED) REQUIREMENTS FOR RENEWAL OF OPERATING LICENSES FOR NUCLEAR POWER PLANTS General Provisions § 54.4 Scope. (a) Plant systems, structures, and components within the scope of this part are— (1..., and components relied on in safety analyses or plant evaluations to perform a function that...

10 CFR 54.4 - Scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... COMMISSION (CONTINUED) REQUIREMENTS FOR RENEWAL OF OPERATING LICENSES FOR NUCLEAR POWER PLANTS General Provisions § 54.4 Scope. (a) Plant systems, structures, and components within the scope of this part are— (1..., and components relied on in safety analyses or plant evaluations to perform a function that...

42 CFR 483.136 - Evaluating whether an individual with intellectual disability requires specialized services...

Code of Federal Regulations, 2013 CFR

2013-10-01

..., positioning, transfer skills, gross motor dexterity, visual motor perception, fine motor dexterity, eye-hand... improve the individual's functional capacity; (10) Social development, such as interpersonal skills, recreation-leisure skills, and relationships with others; (11) Academic/educational development, including...

42 CFR 483.136 - Evaluating whether an individual with intellectual disability requires specialized services...

Code of Federal Regulations, 2014 CFR

2014-10-01

..., positioning, transfer skills, gross motor dexterity, visual motor perception, fine motor dexterity, eye-hand... improve the individual's functional capacity; (10) Social development, such as interpersonal skills, recreation-leisure skills, and relationships with others; (11) Academic/educational development, including...

42 CFR 483.136 - Evaluating whether an individual with intellectual disability requires specialized services...

Code of Federal Regulations, 2012 CFR

2012-10-01

..., positioning, transfer skills, gross motor dexterity, visual motor perception, fine motor dexterity, eye-hand... improve the individual's functional capacity; (10) Social development, such as interpersonal skills, recreation-leisure skills, and relationships with others; (11) Academic/educational development, including...

Spacecraft applications of advanced global positioning system technology

NASA Technical Reports Server (NTRS)

Huth, Gaylord; Dodds, James; Udalov, Sergei; Austin, Richard; Loomis, Peter; Duboraw, I. Newton, III

1988-01-01

The purpose of this study was to evaluate potential uses of Global Positioning System (GPS) in spacecraft applications in the following areas: attitude control and tracking; structural control; traffic control; and time base definition (synchronization). Each of these functions are addressed. Also addressed are the hardware related issues concerning the application of GPS technology and comparisons are provided with alternative instrumentation methods for specific functions required for an advanced low earth orbit spacecraft.

A Review of ETS Differential Item Functioning Assessment Procedures: Flagging Rules, Minimum Sample Size Requirements, and Criterion Refinement. Research Report. ETS RR-12-08

ERIC Educational Resources Information Center

Zwick, Rebecca

2012-01-01

Differential item functioning (DIF) analysis is a key component in the evaluation of the fairness and validity of educational tests. The goal of this project was to review the status of ETS DIF analysis procedures, focusing on three aspects: (a) the nature and stringency of the statistical rules used to flag items, (b) the minimum sample size…

Reduced power processor requirements for the 30-cm diameter HG ion thruster

NASA Technical Reports Server (NTRS)

Rawlin, V. K.

1979-01-01

The characteristics of power processors strongly impact the overall performance and cost of electric propulsion systems. A program was initiated to evaluate simplifications of the thruster-power processor interface requirements. The power processor requirements are mission dependent with major differences arising for those missions which require a nearly constant thruster operating point (typical of geocentric and some inbound planetary missions) and those requiring operation over a large range of input power (such as outbound planetary missions). This paper describes the results of tests which have indicated that as many as seven of the twelve power supplies may be eliminated from the present Functional Model Power Processor used with 30-cm diameter Hg ion thrusters.

Two Dimensional Symmetric Correlation Functions of the S Operator and Two Dimensional Fourier Transforms: Considering the Line Coupling for P and R Lines of Linear Molecules

NASA Technical Reports Server (NTRS)

Ma, Q.; Boulet, C.; Tipping, R. H.

2014-01-01

The refinement of the Robert-Bonamy (RB) formalism by considering the line coupling for isotropic Raman Q lines of linear molecules developed in our previous study [Q. Ma, C. Boulet, and R. H. Tipping, J. Chem. Phys. 139, 034305 (2013)] has been extended to infrared P and R lines. In these calculations, the main task is to derive diagonal and off-diagonal matrix elements of the Liouville operator iS1 - S2 introduced in the formalism. When one considers the line coupling for isotropic Raman Q lines where their initial and final rotational quantum numbers are identical, the derivations of off-diagonal elements do not require extra correlation functions of the ^S operator and their Fourier transforms except for those used in deriving diagonal elements. In contrast, the derivations for infrared P and R lines become more difficult because they require a lot of new correlation functions and their Fourier transforms. By introducing two dimensional correlation functions labeled by two tensor ranks and making variable changes to become even functions, the derivations only require the latters' two dimensional Fourier transforms evaluated at two modulation frequencies characterizing the averaged energy gap and the frequency detuning between the two coupled transitions. With the coordinate representation, it is easy to accurately derive these two dimensional correlation functions. Meanwhile, by using the sampling theory one is able to effectively evaluate their two dimensional Fourier transforms. Thus, the obstacles in considering the line coupling for P and R lines have been overcome. Numerical calculations have been carried out for the half-widths of both the isotropic Raman Q lines and the infrared P and R lines of C2H2 broadened by N2. In comparison with values derived from the RB formalism, new calculated values are significantly reduced and become closer to measurements.

Two dimensional symmetric correlation functions of the S-circumflex operator and two dimensional Fourier transforms: Considering the line coupling for P and R lines of linear molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ma, Q.; Boulet, C.; Tipping, R. H.

The refinement of the Robert-Bonamy (RB) formalism by considering the line coupling for isotropic Raman Q lines of linear molecules developed in our previous study [Q. Ma, C. Boulet, and R. H. Tipping, J. Chem. Phys. 139, 034305 (2013)] has been extended to infrared P and R lines. In these calculations, the main task is to derive diagonal and off-diagonal matrix elements of the Liouville operator iS{sub 1} − S{sub 2} introduced in the formalism. When one considers the line coupling for isotropic Raman Q lines where their initial and final rotational quantum numbers are identical, the derivations of off-diagonalmore » elements do not require extra correlation functions of the S-circumflex operator and their Fourier transforms except for those used in deriving diagonal elements. In contrast, the derivations for infrared P and R lines become more difficult because they require a lot of new correlation functions and their Fourier transforms. By introducing two dimensional correlation functions labeled by two tensor ranks and making variable changes to become even functions, the derivations only require the latters’ two dimensional Fourier transforms evaluated at two modulation frequencies characterizing the averaged energy gap and the frequency detuning between the two coupled transitions. With the coordinate representation, it is easy to accurately derive these two dimensional correlation functions. Meanwhile, by using the sampling theory one is able to effectively evaluate their two dimensional Fourier transforms. Thus, the obstacles in considering the line coupling for P and R lines have been overcome. Numerical calculations have been carried out for the half-widths of both the isotropic Raman Q lines and the infrared P and R lines of C{sub 2}H{sub 2} broadened by N{sub 2}. In comparison with values derived from the RB formalism, new calculated values are significantly reduced and become closer to measurements.« less

Pyrotechnic hazards classification and evaluation program. Phase 3, segments 1-4: Investigation of sensitivity test methods and procedures for pyrotechnic hazards evaluation and classification, part A

NASA Technical Reports Server (NTRS)

1971-01-01

The findings, conclusions, and recommendations relative to the investigations conducted to evaluate tests for classifying pyrotechnic materials and end items as to their hazard potential are presented. Information required to establish an applicable means of determining the potential hazards of pyrotechnics is described. Hazard evaluations are based on the peak overpressure or impulse resulting from the explosion as a function of distance from the source. Other hazard classification tests include dust ignition sensitivity, impact ignition sensitivity, spark ignition sensitivity, and differential thermal analysis.

Evaluation of user interface and workflow design of a bedside nursing clinical decision support system.

PubMed

Yuan, Michael Juntao; Finley, George Mike; Long, Ju; Mills, Christy; Johnson, Ron Kim

2013-01-31

Clinical decision support systems (CDSS) are important tools to improve health care outcomes and reduce preventable medical adverse events. However, the effectiveness and success of CDSS depend on their implementation context and usability in complex health care settings. As a result, usability design and validation, especially in real world clinical settings, are crucial aspects of successful CDSS implementations. Our objective was to develop a novel CDSS to help frontline nurses better manage critical symptom changes in hospitalized patients, hence reducing preventable failure to rescue cases. A robust user interface and implementation strategy that fit into existing workflows was key for the success of the CDSS. Guided by a formal usability evaluation framework, UFuRT (user, function, representation, and task analysis), we developed a high-level specification of the product that captures key usability requirements and is flexible to implement. We interviewed users of the proposed CDSS to identify requirements, listed functions, and operations the system must perform. We then designed visual and workflow representations of the product to perform the operations. The user interface and workflow design were evaluated via heuristic and end user performance evaluation. The heuristic evaluation was done after the first prototype, and its results were incorporated into the product before the end user evaluation was conducted. First, we recruited 4 evaluators with strong domain expertise to study the initial prototype. Heuristic violations were coded and rated for severity. Second, after development of the system, we assembled a panel of nurses, consisting of 3 licensed vocational nurses and 7 registered nurses, to evaluate the user interface and workflow via simulated use cases. We recorded whether each session was successfully completed and its completion time. Each nurse was asked to use the National Aeronautics and Space Administration (NASA) Task Load Index to self-evaluate the amount of cognitive and physical burden associated with using the device. A total of 83 heuristic violations were identified in the studies. The distribution of the heuristic violations and their average severity are reported. The nurse evaluators successfully completed all 30 sessions of the performance evaluations. All nurses were able to use the device after a single training session. On average, the nurses took 111 seconds (SD 30 seconds) to complete the simulated task. The NASA Task Load Index results indicated that the work overhead on the nurses was low. In fact, most of the burden measures were consistent with zero. The only potentially significant burden was temporal demand, which was consistent with the primary use case of the tool. The evaluation has shown that our design was functional and met the requirements demanded by the nurses' tight schedules and heavy workloads. The user interface embedded in the tool provided compelling utility to the nurse with minimal distraction.

Evaluation of space shuttle main engine fluid dynamic frequency response characteristics

NASA Technical Reports Server (NTRS)

Gardner, T. G.

1980-01-01

In order to determine the POGO stability characteristics of the space shuttle main engine liquid oxygen (LOX) system, the fluid dynamic frequency response functions between elements in the SSME LOX system was evaluated, both analytically and experimentally. For the experimental data evaluation, a software package was written for the Hewlett-Packard 5451C Fourier analyzer. The POGO analysis software is documented and consists of five separate segments. Each segment is stored on the 5451C disc as an individual program and performs its own unique function. Two separate data reduction methods, a signal calibration, coherence or pulser signal based frequency response function blanking, and automatic plotting features are included in the program. The 5451C allows variable parameter transfer from program to program. This feature is used to advantage and requires only minimal user interface during the data reduction process. Experimental results are included and compared with the analytical predictions in order to adjust the general model and arrive at a realistic simulation of the POGO characteristics.

Prediction of primary vs secondary hypertension in children.

PubMed

Baracco, Rossana; Kapur, Gaurav; Mattoo, Tej; Jain, Amrish; Valentini, Rudolph; Ahmed, Maheen; Thomas, Ronald

2012-05-01

Despite current guidelines, variability exists in the workup of hypertensive children due to physician preferences. The study evaluates primary vs secondary hypertension diagnosis from investigations routinely performed in hypertensive children. This retrospective study included children 5 to 19 years with primary and secondary hypertension. The proportions of abnormal laboratory and imaging tests were compared between primary and secondary hypertension groups. Risk factors for primary vs secondary hypertension were evaluated by logistic regression and likelihood function analysis. Patients with secondary hypertension were younger (5-12 years) and had a higher proportion of abnormal creatinine, renal ultrasound, and echocardiogram findings. There was no significant difference in abnormal results of thyroid function, urine catecholamines, plasma renin, and aldosterone. Abnormal renal ultrasound findings and age were predictors of secondary hypertension by regression and likelihood function analysis. Children aged 5 to 12 years with abnormal renal ultrasound findings and high diastolic blood pressures are at higher risk for secondary hypertension that requires detailed evaluation. © 2012 Wiley Periodicals, Inc.

A Method for Functional Task Alignment Analysis of an Arthrocentesis Simulator.

PubMed

Adams, Reid A; Gilbert, Gregory E; Buckley, Lisa A; Nino Fong, Rodolfo; Fuentealba, I Carmen; Little, Erika L

2018-05-16

During simulation-based education, simulators are subjected to procedures composed of a variety of tasks and processes. Simulators should functionally represent a patient in response to the physical action of these tasks. The aim of this work was to describe a method for determining whether a simulator does or does not have sufficient functional task alignment (FTA) to be used in a simulation. Potential performance checklist items were gathered from published arthrocentesis guidelines and aggregated into a performance checklist using Lawshe's method. An expert panel used this performance checklist and an FTA analysis questionnaire to evaluate a simulator's ability to respond to the physical actions required by the performance checklist. Thirteen items, from a pool of 39, were included on the performance checklist. Experts had mixed reviews of the simulator's FTA and its suitability for use in simulation. Unexpectedly, some positive FTA was found for several tasks where the simulator lacked functionality. By developing a detailed list of specific tasks required to complete a clinical procedure, and surveying experts on the simulator's response to those actions, educators can gain insight into the simulator's clinical accuracy and suitability. Unexpected of positive FTA ratings of function deficits suggest that further revision of the survey method is required.

Designing eHealth that Matters via a Multidisciplinary Requirements Development Approach

PubMed Central

Wentzel, Jobke; Van Gemert-Pijnen, Julia EWC

2013-01-01

Background Requirements development is a crucial part of eHealth design. It entails all the activities devoted to requirements identification, the communication of requirements to other developers, and their evaluation. Currently, a requirements development approach geared towards the specifics of the eHealth domain is lacking. This is likely to result in a mismatch between the developed technology and end user characteristics, physical surroundings, and the organizational context of use. It also makes it hard to judge the quality of eHealth design, since it makes it difficult to gear evaluations of eHealth to the main goals it is supposed to serve. Objective In order to facilitate the creation of eHealth that matters, we present a practical, multidisciplinary requirements development approach which is embedded in a holistic design approach for eHealth (the Center for eHealth Research roadmap) that incorporates both human-centered design and business modeling. Methods Our requirements development approach consists of five phases. In the first, preparatory, phase the project team is composed and the overall goal(s) of the eHealth intervention are decided upon. Second, primary end users and other stakeholders are identified by means of audience segmentation techniques and our stakeholder identification method. Third, the designated context of use is mapped and end users are profiled by means of requirements elicitation methods (eg, interviews, focus groups, or observations). Fourth, stakeholder values and eHealth intervention requirements are distilled from data transcripts, which leads to phase five, in which requirements are communicated to other developers using a requirements notation template we developed specifically for the context of eHealth technologies. Results The end result of our requirements development approach for eHealth interventions is a design document which includes functional and non-functional requirements, a list of stakeholder values, and end user profiles in the form of personas (fictitious end users, representative of a primary end user group). Conclusions The requirements development approach presented in this article enables eHealth developers to apply a systematic and multi-disciplinary approach towards the creation of requirements. The cooperation between health, engineering, and social sciences creates a situation in which a mismatch between design, end users, and the organizational context can be avoided. Furthermore, we suggest to evaluate eHealth on a feature-specific level in order to learn exactly why such a technology does or does not live up to its expectations. PMID:23796508

A Tool for the Automated Design and Evaluation of Habitat Interior Layouts

NASA Technical Reports Server (NTRS)

Simon, Matthew A.; Wilhite, Alan W.

2013-01-01

The objective of space habitat design is to minimize mass and system size while providing adequate space for all necessary equipment and a functional layout that supports crew health and productivity. Unfortunately, development and evaluation of interior layouts is often ignored during conceptual design because of the subjectivity and long times required using current evaluation methods (e.g., human-in-the-loop mockup tests and in-depth CAD evaluations). Early, more objective assessment could prevent expensive design changes that may increase vehicle mass and compromise functionality. This paper describes a new interior design evaluation method to enable early, structured consideration of habitat interior layouts. This interior layout evaluation method features a comprehensive list of quantifiable habitat layout evaluation criteria, automatic methods to measure these criteria from a geometry model, and application of systems engineering tools and numerical methods to construct a multi-objective value function measuring the overall habitat layout performance. In addition to a detailed description of this method, a C++/OpenGL software tool which has been developed to implement this method is also discussed. This tool leverages geometry modeling coupled with collision detection techniques to identify favorable layouts subject to multiple constraints and objectives (e.g., minimize mass, maximize contiguous habitable volume, maximize task performance, and minimize crew safety risks). Finally, a few habitat layout evaluation examples are described to demonstrate the effectiveness of this method and tool to influence habitat design.

Application of a territorial-based filtering algorithm in turbomachinery blade design optimization

NASA Astrophysics Data System (ADS)

Bahrami, Salman; Khelghatibana, Maryam; Tribes, Christophe; Yi Lo, Suk; von Fellenberg, Sven; Trépanier, Jean-Yves; Guibault, François

2017-02-01

A territorial-based filtering algorithm (TBFA) is proposed as an integration tool in a multi-level design optimization methodology. The design evaluation burden is split between low- and high-cost levels in order to properly balance the cost and required accuracy in different design stages, based on the characteristics and requirements of the case at hand. TBFA is in charge of connecting those levels by selecting a given number of geometrically different promising solutions from the low-cost level to be evaluated in the high-cost level. Two test case studies, a Francis runner and a transonic fan rotor, have demonstrated the robustness and functionality of TBFA in real industrial optimization problems.

Evaluation of super-water reducers for highway applications

NASA Astrophysics Data System (ADS)

Whiting, D.

1981-03-01

Super-water reducers were characterized and evaluated as potential candidates for production of low water to cement ratio, high strength concretes for highway construction applications. Admixtures were composed of either naphthalene or melamine sulfonated formaldehyde condensates. A mini-slump procedure was used to assess dosage requirements and behavior of workability with time of cement pastes. Required dosage was found to be a function of tricalcium aluminate content, alkali content, and fineness of the cement. Concretes exhibited high rates of slump loss when super-water reducers were used. The most promising area of application of these products appears to be in production of dense, high cement content concrete using mobile concrete mixer/transporters.

Insulin-like growth factor-I regulates GPER expression and function in cancer cells.

PubMed

De Marco, P; Bartella, V; Vivacqua, A; Lappano, R; Santolla, M F; Morcavallo, A; Pezzi, V; Belfiore, A; Maggiolini, M

2013-02-07

Functional cross talk between insulin-like growth factor-I (IGF-I) system and estrogen signaling has been largely reported, although the underlying molecular mechanisms remain to be fully elucidated. As GPR30/GPER mediates rapid cell responses to estrogens, we evaluated the potential of IGF-I to regulate GPER expression and function in estrogen receptor (ER)α-positive breast (MCF-7) and endometrial (Ishikawa) cancer cells. We found that IGF-I transactivates the GPER promoter sequence and upregulates GPER mRNA and protein levels in both cells types. Similar data were found, at least in part, in carcinoma-associated fibroblasts. The upregulation of GPER expression by IGF-I involved the IGF-IR/PKCδ/ERK/c-fos/AP1 transduction pathway and required ERα, as ascertained by specific pharmacological inhibitors and gene-silencing. In both MCF-7 and Ishikawa cancer cells, the IGF-I-dependent cell migration required GPER and its main target gene CTGF, whereas the IGF-I-induced proliferation required both GPER and cyclin D1. Our data demonstrate that the IGF-I system regulates GPER expression and function, triggering the activation of a signaling network that leads to the migration and proliferation of cancer cells.

Demystifying Results-Based Performance Measurement.

ERIC Educational Resources Information Center

Jorjani, Hamid

Many evaluators are convinced that Results-based Performance Measurement (RBPM) is an effective tool to improve service delivery and cost effectiveness in both public and private sectors. Successful RBPM requires self-directed and cross-functional work teams and the supporting infrastructure to make it work. There are many misconceptions and…

49 CFR 655.15 - Policy statement contents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... immediately from his or her safety-sensitive function and be evaluated by a substance abuse professional, as..., DEPARTMENT OF TRANSPORTATION PREVENTION OF ALCOHOL MISUSE AND PROHIBITED DRUG USE IN TRANSIT OPERATIONS Program Requirements § 655.15 Policy statement contents. The local governing board of the employer or...

49 CFR 655.15 - Policy statement contents.

Code of Federal Regulations, 2010 CFR

2010-10-01

... immediately from his or her safety-sensitive function and be evaluated by a substance abuse professional, as..., DEPARTMENT OF TRANSPORTATION PREVENTION OF ALCOHOL MISUSE AND PROHIBITED DRUG USE IN TRANSIT OPERATIONS Program Requirements § 655.15 Policy statement contents. The local governing board of the employer or...

49 CFR 655.15 - Policy statement contents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... immediately from his or her safety-sensitive function and be evaluated by a substance abuse professional, as..., DEPARTMENT OF TRANSPORTATION PREVENTION OF ALCOHOL MISUSE AND PROHIBITED DRUG USE IN TRANSIT OPERATIONS Program Requirements § 655.15 Policy statement contents. The local governing board of the employer or...

49 CFR 655.15 - Policy statement contents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... immediately from his or her safety-sensitive function and be evaluated by a substance abuse professional, as..., DEPARTMENT OF TRANSPORTATION PREVENTION OF ALCOHOL MISUSE AND PROHIBITED DRUG USE IN TRANSIT OPERATIONS Program Requirements § 655.15 Policy statement contents. The local governing board of the employer or...

Speech Restoration: An Interactive Process

ERIC Educational Resources Information Center

Grataloup, Claire; Hoen, Michael; Veuillet, Evelyne; Collet, Lionel; Pellegrino, Francois; Meunier, Fanny

2009-01-01

Purpose: This study investigates the ability to understand degraded speech signals and explores the correlation between this capacity and the functional characteristics of the peripheral auditory system. Method: The authors evaluated the capability of 50 normal-hearing native French speakers to restore time-reversed speech. The task required them…

Human exposure modeling in a life cycle framework for chemicals and products

EPA Science Inventory

A chemical enters into commerce to serve a specific function in a product or process. This decision triggers both the manufacture of the chemical and its potential release over the life cycle of the product. Efficiently evaluating chemical safety and sustainability requires combi...

Bibliographic Records in an Online Environment

ERIC Educational Resources Information Center

Cossham, Amanda F.

2013-01-01

Introduction: The IFLA functional requirements for bibliographic records model has had a major impact on cataloguing principles and practices over the past fifteen years. This paper evaluates the model in the light of changes in the wider information environment (especially to information resources and retrieval) and in information seeking…

Design of a recumbent seating system

NASA Technical Reports Server (NTRS)

Croyle, Scott; Delarosa, Jose; George, Daren; Hinkle, Cathy; Karas, Stephen

1993-01-01

Future space shuttle missions presented by NASA might require the shuttle to rendezvous with the Russian space station Mir for the purpose of transporting astronauts back to earth. Due to the atrophied state of these astronauts, a special seating system must be designed for their transportation. The main functions of this seating system are to support and restrain the astronauts during normal reentry flight and to dampen some of the loading that might occur in a crash situation. Through research, the design team developed many concept variants for these functional requirements. By evaluating each variant, the concepts were eliminated until the four most attractive designs remained. The team used a decision matrix to determine the best concept to carry through embodiment. This concept involved using struts for support during reentry flight and a spring damper/shock absorber system to dampen crash landing loads. The embodiment design process consisted of defining the layout of each of the main functional components, specifically, the seat structure and the strut structure. Through the use of MCS/pal two, the design was refined until it could handle all required loads and dampen to the forces specified. The auxiliary function carriers were then considered. Following the design of these components, the complete final layout could be determined. It is concluded that the final design meets all specifications outlined in the conceptual design. The main advantages of this design are its low weight, simplicity, and large amount of function sharing between different components. The disassembly of this design could potentially present a problem because of time and size constraints involved. Overall, this design meets or exceeds all functional requirements.

Computerized Adaptive Testing Project: Objectives and Requirements.

DTIC Science & Technology

1982-07-01

developing a cqmputerlzed adaptive lwfb system ( CAT ). SiN 0102- LP. Old. "O AM"- S/M "of F.g~ smuuim ftmAYUSN 0 IM ~ A joint-service coordinated effort is In...progress to develop a computerized adaptive testing ( CAT ) system and to evaluate its potential for use in the Military Enlistment Processing Stations...lead laboratory for this effort. This report is intended to serve as a working paper documenting CAT system functional requirements and schedules. It

DoD Related Software Technology Requirements, Practices, and Prospects for the Future

DTIC Science & Technology

1984-06-01

SOFIWARE REQUIREMENTS DEFINITION 61 G. DESIGN 63 H. CODING 66 I. INTEGRATION 68 "J. TESTING AND EVALUATION 69 K. CONFIGURATION CONTROL 72 "L. SOFTWARE... integrated functionality. It must be able to operate perfectly after prolonged periods of dormancy in hostile environments and when portions of the system have...aircraft to middle- eastern trouble spots. Although these examples are just highlights of defense systems, they are representative of the integral nature

Evidenced-based review of clinical studies on periodontics.

PubMed

2009-08-01

Periodontal diseases have several implications for the practice of endodontics. First, advanced periodontitis often has direct implications for the long-term prognosis of the case and requires careful evaluation and coordinated treatment of both the periodontic and endodontic diseases. Second, the potential for functional interactions between odontogenic pathoses and marginal periodontitis requires careful collection of clinical observations and monitoring the outcome of various treatments. In this section, we provide an analysis of recent clinical studies in this area.

Case study comparison of functional vs. organic stability approaches for assessing threat potential at closed landfills in the USA.

PubMed

O'Donnell, Sean T; Caldwell, Michael D; Barlaz, Morton A; Morris, Jeremy W F

2018-05-01

Municipal solid waste (MSW) landfills in the USA are regulated under Subtitle D of the Resource Conservation and Recovery Act (RCRA), which includes the requirement to protect human health and the environment (HHE) during the post-closure care (PCC) period. Several approaches have been published for assessment of potential threats to HHE. These approaches can be broadly divided into organic stabilization, which establishes an inert waste mass as the ultimate objective, and functional stability, which considers long-term emissions in the context of minimizing threats to HHE in the absence of active controls. The objective of this research was to conduct a case study evaluation of a closed MSW landfill using long-term data on landfill gas (LFG) production, leachate quality, site geology, and solids decomposition. Evaluations based on both functional and organic stability criteria were compared. The results showed that longer periods of LFG and leachate management would be required using organic stability criteria relative to an approach based on functional stability. These findings highlight the somewhat arbitrary and overly stringent nature of assigning universal stability criteria without due consideration of the landfill's hydrogeologic setting and potential environmental receptors. This supports previous studies that advocated for transition to a passive or inactive control stage based on a performance-based functional stability framework as a defensible mechanism for optimizing and ending regulatory PCC. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluation of a preliminary physical function item bank supported the expected advantages of the Patient-Reported Outcomes Measurement Information System (PROMIS).

PubMed

Rose, M; Bjorner, J B; Becker, J; Fries, J F; Ware, J E

2008-01-01

The Patient-Reported Outcomes Measurement Information System (PROMIS) was initiated to improve precision, reduce respondent burden, and enhance the comparability of health outcomes measures. We used item response theory (IRT) to construct and evaluate a preliminary item bank for physical function assuming four subdomains. Data from seven samples (N=17,726) using 136 items from nine questionnaires were evaluated. A generalized partial credit model was used to estimate item parameters, which were normed to a mean of 50 (SD=10) in the US population. Item bank properties were evaluated through Computerized Adaptive Test (CAT) simulations. IRT requirements were fulfilled by 70 items covering activities of daily living, lower extremity, and central body functions. The original item context partly affected parameter stability. Items on upper body function, and need for aid or devices did not fit the IRT model. In simulations, a 10-item CAT eliminated floor and decreased ceiling effects, achieving a small standard error (< 2.2) across scores from 20 to 50 (reliability >0.95 for a representative US sample). This precision was not achieved over a similar range by any comparable fixed length item sets. The methods of the PROMIS project are likely to substantially improve measures of physical function and to increase the efficiency of their administration using CAT.

The basis function approach for modeling autocorrelation in ecological data

USGS Publications Warehouse

Hefley, Trevor J.; Broms, Kristin M.; Brost, Brian M.; Buderman, Frances E.; Kay, Shannon L.; Scharf, Henry; Tipton, John; Williams, Perry J.; Hooten, Mevin B.

2017-01-01

Analyzing ecological data often requires modeling the autocorrelation created by spatial and temporal processes. Many seemingly disparate statistical methods used to account for autocorrelation can be expressed as regression models that include basis functions. Basis functions also enable ecologists to modify a wide range of existing ecological models in order to account for autocorrelation, which can improve inference and predictive accuracy. Furthermore, understanding the properties of basis functions is essential for evaluating the fit of spatial or time-series models, detecting a hidden form of collinearity, and analyzing large data sets. We present important concepts and properties related to basis functions and illustrate several tools and techniques ecologists can use when modeling autocorrelation in ecological data.

An Implanted Upper-Extremity Neuroprosthesis Using Myoelectric Control

PubMed Central

Kilgore, Kevin L.; Hoyen, Harry A.; Bryden, Anne M.; Hart, Ronald L.; Keith, Michael W.; Peckham, P. Hunter

2009-01-01

Purpose The purpose of this study was evaluate the potential of a second-generation implantable neuroprosthesis that provides improved control of hand grasp and elbow extension for individuals with cervical level spinal cord injury. The key feature of this system is that users control their stimulated function through electromyographic (EMG) signals. Methods The second-generation neuroprosthesis consists of 12 stimulating electrodes, 2 EMG signal recording electrodes, an implanted stimulator-telemeter device, an external control unit, and a transmit/receive coil. The system was implanted in a single surgical procedure. Functional outcomes for each subject were evaluated in the domains of body functions and structures, activity performance, and societal participation. Results Three individuals with C5/C6 spinal cord injury received system implantation with subsequent prospective evaluation for a minimum of 2 years. All 3 subjects demonstrated that EMG signals can be recorded from voluntary muscles in the presence of electrical stimulation of nearby muscles. Significantly increased pinch force and grasp function was achieved for each subject. Functional evaluation demonstrated improvement in at least 5 activities of daily living using the Activities of Daily Living Abilities Test. Each subject was able to use the device at home. There were no system failures. Two of 6 EMG electrodes required surgical revision because of suboptimal location of the recording electrodes. Conclusions These results indicate that a neuroprosthesis with implanted myoelectric control is an effective method for restoring hand function in midcervical level spinal cord injury. Type of study/level of evidence Therapeutic IV. PMID:18406958

FLBEIA : A simulation model to conduct Bio-Economic evaluation of fisheries management strategies

NASA Astrophysics Data System (ADS)

Garcia, Dorleta; Sánchez, Sonia; Prellezo, Raúl; Urtizberea, Agurtzane; Andrés, Marga

Fishery systems are complex systems that need to be managed in order to ensure a sustainable and efficient exploitation of marine resources. Traditionally, fisheries management has relied on biological models. However, in recent years the focus on mathematical models which incorporate economic and social aspects has increased. Here, we present FLBEIA, a flexible software to conduct bio-economic evaluation of fisheries management strategies. The model is multi-stock, multi-fleet, stochastic and seasonal. The fishery system is described as a sum of processes, which are internally assembled in a predetermined way. There are several functions available to describe the dynamic of each process and new functions can be added to satisfy specific requirements.

Method and apparatus for non-invasive evaluation of diaphragmatic function

NASA Technical Reports Server (NTRS)

Yost, William T. (Inventor); Wait, Juliette L. (Inventor); Nahormek, Patricia A. (Inventor); Cantrell, John H. (Inventor); Hanna-Hawver, Pamela D. (Inventor)

1995-01-01

A method for non-invasive evaluation of diaphragmatic function in humans measures the thickness of the diaphragm in real time with an ultrasonic device, and displays the variations of diaphragm thickness versus time. Formulae are given for calculating a quantitative value for the reserve fatigue capacity of a patient's diaphragm from data obtained by measuring the time limits for maintaining a constant breathing pattern on the display at two different pressure differentials in series with the patient's airways. An apparatus for displaying the diaphragm thickness in real time is also described. The method can be used both on healthy patients and on patients with so severe breathing dysfunctions that they require breathing support from respirators.

Method and apparatus for non-invasive evaluation of diaphragmatic function

NASA Technical Reports Server (NTRS)

Yost, William T. (Inventor); Wait, Juliette L. (Inventor); Nahormek, Patricia A. (Inventor); Cantrell, John H. (Inventor); Hanna-Hawver, Pamela D. (Inventor)

1994-01-01

A method for non-invasive evaluation of diaphragmatic function in humans measures the thickness of the diaphragm in real time with an ultrasonic device, and displays the variations of diaphragm thickness versus time. Formulae are given for calculating a quantitative value for the reserve fatigue capacity of a patient's diaphragm from data obtained by measuring the time limits for maintaining a constant breathing pattern on the display at two different pressure differentials in series with the patient's airways. An apparatus for displaying the diaphragm thickness in real time is also described. The method can be used both on healthy patients and on patients with so severe breathing dysfunctions that they require breathing support from respirators.

Anharmonic effects in the quantum cluster equilibrium method

NASA Astrophysics Data System (ADS)

von Domaros, Michael; Perlt, Eva

2017-03-01

The well-established quantum cluster equilibrium (QCE) model provides a statistical thermodynamic framework to apply high-level ab initio calculations of finite cluster structures to macroscopic liquid phases using the partition function. So far, the harmonic approximation has been applied throughout the calculations. In this article, we apply an important correction in the evaluation of the one-particle partition function and account for anharmonicity. Therefore, we implemented an analytical approximation to the Morse partition function and the derivatives of its logarithm with respect to temperature, which are required for the evaluation of thermodynamic quantities. This anharmonic QCE approach has been applied to liquid hydrogen chloride and cluster distributions, and the molar volume, the volumetric thermal expansion coefficient, and the isobaric heat capacity have been calculated. An improved description for all properties is observed if anharmonic effects are considered.

A Kinematically Consistent Two-Point Correlation Function

NASA Technical Reports Server (NTRS)

Ristorcelli, J. R.

1998-01-01

A simple kinematically consistent expression for the longitudinal two-point correlation function related to both the integral length scale and the Taylor microscale is obtained. On the inner scale, in a region of width inversely proportional to the turbulent Reynolds number, the function has the appropriate curvature at the origin. The expression for two-point correlation is related to the nonlinear cascade rate, or dissipation epsilon, a quantity that is carried as part of a typical single-point turbulence closure simulation. Constructing an expression for the two-point correlation whose curvature at the origin is the Taylor microscale incorporates one of the fundamental quantities characterizing turbulence, epsilon, into a model for the two-point correlation function. The integral of the function also gives, as is required, an outer integral length scale of the turbulence independent of viscosity. The proposed expression is obtained by kinematic arguments; the intention is to produce a practically applicable expression in terms of simple elementary functions that allow an analytical evaluation, by asymptotic methods, of diverse functionals relevant to single-point turbulence closures. Using the expression devised an example of the asymptotic method by which functionals of the two-point correlation can be evaluated is given.

Functional evaluation of peripheral nerve regeneration and target reinnervation in animal models: a critical overview.

PubMed

Navarro, Xavier

2016-02-01

Peripheral nerve injuries usually lead to severe loss of motor, sensory and autonomic functions in the patients. Due to the complex requirements for adequate axonal regeneration, functional recovery is often poorly achieved. Experimental models are useful to investigate the mechanisms related to axonal regeneration and tissue reinnervation, and to test new therapeutic strategies to improve functional recovery. Therefore, objective and reliable evaluation methods should be applied for the assessment of regeneration and function restitution after nerve injury in animal models. This review gives an overview of the most useful methods to assess nerve regeneration, target reinnervation and recovery of complex sensory and motor functions, their values and limitations. The selection of methods has to be adequate to the main objective of the research study, either enhancement of axonal regeneration, improving regeneration and reinnervation of target organs by different types of nerve fibres, or increasing recovery of complex sensory and motor functions. It is generally recommended to use more than one functional method for each purpose, and also to perform morphological studies of the injured nerve and the reinnervated targets. © 2015 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Process Hood Stand Support Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

VAN KATWIJK, C.

2000-04-03

This package is written to comply with EN-6-035-00 for upgrade dedication of commercial grade items (CGI). The SNF-5953 CGI package provides the Technical evaluation to identify the critical characteristics and the acceptance criteria associated with the safety function of the Hood Stand Support Steel. Completion of the technical and quality requirements identified in the dedication package will provide enough data to be reasonably assured that CGI Hood Stand Support Steel will perform its SC function.

Vestibular Function Measurement Devices

PubMed Central

Miles, Richard D.; Zapala, David A.

2015-01-01

Vestibular function laboratories utilize a multitude of diagnostic instruments to evaluate a dizzy patient. Caloric irrigators, oculomotor stimuli, and rotational chairs produce a stimulus whose accuracy is required for the patient response to be accurate. Careful attention to everything from cleanliness of equipment to threshold adjustments determine on a daily basis if patient data are going to be correct and useful. Instrumentation specifications that change with time such as speed and temperature must periodically be checked using calibrated instruments. PMID:27516710

Low-rank canonical-tensor decomposition of potential energy surfaces: application to grid-based diagrammatic vibrational Green's function theory

NASA Astrophysics Data System (ADS)

Rai, Prashant; Sargsyan, Khachik; Najm, Habib; Hermes, Matthew R.; Hirata, So

2017-09-01

A new method is proposed for a fast evaluation of high-dimensional integrals of potential energy surfaces (PES) that arise in many areas of quantum dynamics. It decomposes a PES into a canonical low-rank tensor format, reducing its integral into a relatively short sum of products of low-dimensional integrals. The decomposition is achieved by the alternating least squares (ALS) algorithm, requiring only a small number of single-point energy evaluations. Therefore, it eradicates a force-constant evaluation as the hotspot of many quantum dynamics simulations and also possibly lifts the curse of dimensionality. This general method is applied to the anharmonic vibrational zero-point and transition energy calculations of molecules using the second-order diagrammatic vibrational many-body Green's function (XVH2) theory with a harmonic-approximation reference. In this application, high dimensional PES and Green's functions are both subjected to a low-rank decomposition. Evaluating the molecular integrals over a low-rank PES and Green's functions as sums of low-dimensional integrals using the Gauss-Hermite quadrature, this canonical-tensor-decomposition-based XVH2 (CT-XVH2) achieves an accuracy of 0.1 cm-1 or higher and nearly an order of magnitude speedup as compared with the original algorithm using force constants for water and formaldehyde.

Evaluating MEDEVAC Force Structure Requirements Using an Updated Army Scenario, Total Army Analysis Admission Data, Monte Carlo Simulation, and Theater Structure.

PubMed

Fulton, Lawrence; Kerr, Bernie; Inglis, James M; Brooks, Matthew; Bastian, Nathaniel D

2015-07-01

In this study, we re-evaluate air ambulance requirements (rules of allocation) and planning considerations based on an Army-approved, Theater Army Analysis scenario. A previous study using workload only estimated a requirement of 0.4 to 0.6 aircraft per admission, a significant bolus over existence-based rules. In this updated study, we estimate requirements for Phase III (major combat operations) using a simulation grounded in previously published work and Phase IV (stability operations) based on four rules of allocation: unit existence rules, workload factors, theater structure (geography), and manual input. This study improves upon previous work by including the new air ambulance mission requirements of Department of Defense 51001.1, Roles and Functions of the Services, by expanding the analysis over two phases, and by considering unit rotation requirements known as Army Force Generation based on Department of Defense policy. The recommendations of this study are intended to inform future planning factors and already provided decision support to the Army Aviation Branch in determining force structure requirements. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

Monitoring survival and function of transfused platelets in Bernard-Soulier syndrome by flow cytometry and a cone and plate(let) analyzer (Impact-R).

PubMed

Panzer, Simon; Eichelberger, Beate; Koren, Daniela; Kaufmann, Karin; Male, Christoph

2007-01-01

Bernard-Soulier syndrome (BSS) patients may repeatedly require transfusion of platelets (PLTs). The hemostatic competence of transfused PLTs requires monitoring. Flow cytometry and a cone and plate(let) analyzer (Impact-R, DiaMed) were used to monitor survival and function of transfused PLTs in a 7-year-old girl with BSS undergoing surgery. Flow cytometry was applied to differentiate autologous PLTs from transfused PLTs by staining for CD42b. The Impact, which measures PLT adhesion and aggregation in response to high shear stress, was used to evaluate PLT function. Transfused PLTs were detectable by flow cytometry for 1 week after transfusion. While the patient's PLTs did not respond to high shear stress before transfusion, a normal response was documented by the Impact on the day after transfusion and 1 week thereafter. Transfused PLTs were detectable by flow cytometry, and their functional activity was demonstrated by the Impact.

Scheduler Design Criteria: Requirements and Considerations

NASA Technical Reports Server (NTRS)

Lee, Hanbong

2016-01-01

This presentation covers fundamental requirements and considerations for developing schedulers in airport operations. We first introduce performance and functional requirements for airport surface schedulers. Among various optimization problems in airport operations, we focus on airport surface scheduling problem, including runway and taxiway operations. We then describe a basic methodology for airport surface scheduling such as node-link network model and scheduling algorithms previously developed. Next, we explain how to design a mathematical formulation in more details, which consists of objectives, decision variables, and constraints. Lastly, we review other considerations, including optimization tools, computational performance, and performance metrics for evaluation.

Technology demonstrator program for Space Station Environmental Control Life Support System

NASA Technical Reports Server (NTRS)

Adams, Alan M.; Platt, Gordon K.; Claunch, William C.; Humphries, William R.

1987-01-01

The main objectives and requirements of the NASA/Marshall Space Flight Center Technology Demonstration Program are discussed. The program consists of a comparative test and a 90-day manned system test to evaluate an Environmental Control and Life Support System (ECLSS). In the comparative test phase, 14 types of subsystems which perform oxygen and water reclamation functions are to be examined in terms of performance maintenance/service requirements, reliability, and safety. The manned chamber testing phase involves a four person crew using a partial ECLSS for 90 days. The schedule for the program and the program hardware requirements are described.

The enteral vs parenteral nutrition debate revisited.

PubMed

Thomson, Andrew

2008-01-01

Many trials and several meta-analyses have been devoted to comparing enteral with parenteral nutrition support. In this review, these studies are subjected to critical analysis with particular emphasis on their methodology and clinical relevance. Evidence is produced to suggest that the heterogeneous patient populations of the studies and the rigid approach taken to comparing different nutrition therapies inter alia render their conclusions highly questionable and of very doubtful clinical significance. An alternative approach to nutrition research is suggested in which strategies of nutrition support rather than fixed menus are compared. It is suggested that objective measures of intestinal function be evaluated more fully in patients requiring nonvolitional nutrition support, and these are briefly reviewed. In addition, a more scientific approach to evaluating the physiological effects of nutrition support, including chemical tagging and evaluation of muscle function, is recommended.

Development of user customized smart keyboard using Smart Product Design-Finite Element Analysis Process in the Internet of Things.

PubMed

Kim, Jung Woo; Sul, Sang Hun; Choi, Jae Boong

2018-06-07

In a hyper-connected society, IoT environment, markets are rapidly changing as smartphones penetrate global market. As smartphones are applied to various digital media, development of a novel smart product is required. In this paper, a Smart Product Design-Finite Element Analysis Process (SPD-FEAP) is developed to adopt fast-changing tends and user requirements that can be visually verified. The user requirements are derived and quantitatively evaluated from Smart Quality Function Deployment (SQFD) using WebData. Then the usage scenarios are created according to the priority of the functions derived from SQFD. 3D shape analysis by Finite Element Analysis (FEA) was conducted and printed out through Rapid Prototyping (RP) technology to identify any possible errors. Thus, a User Customized Smart Keyboard has been developed using SPD-FEAP. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Superiorization with level control

NASA Astrophysics Data System (ADS)

Cegielski, Andrzej; Al-Musallam, Fadhel

2017-04-01

The convex feasibility problem is to find a common point of a finite family of closed convex subsets. In many applications one requires something more, namely finding a common point of closed convex subsets which minimizes a continuous convex function. The latter requirement leads to an application of the superiorization methodology which is actually settled between methods for convex feasibility problem and the convex constrained minimization. Inspired by the superiorization idea we introduce a method which sequentially applies a long-step algorithm for a sequence of convex feasibility problems; the method employs quasi-nonexpansive operators as well as subgradient projections with level control and does not require evaluation of the metric projection. We replace a perturbation of the iterations (applied in the superiorization methodology) by a perturbation of the current level in minimizing the objective function. We consider the method in the Euclidean space in order to guarantee the strong convergence, although the method is well defined in a Hilbert space.

Specification and testing for power by wire aircraft

NASA Technical Reports Server (NTRS)

Hansen, Irving G.; Kenney, Barbara H.

1993-01-01

A power by wire aircraft is one in which all active functions other than propulsion are implemented electrically. Other nomenclature are 'all electric airplane,' or 'more electric airplane.' What is involved is the task of developing and certifying electrical equipment to replace existing hydraulics and pneumatics. When such functions, however, are primary flight controls which are implemented electrically, new requirements are imposed that were not anticipated by existing power system designs. Standards of particular impact are the requirements of ultra-high reliability, high peak transient bi-directional power flow, and immunity to electromagnetic interference and lightning. Not only must the electromagnetic immunity of the total system be verifiable, but box level tests and meaningful system models must be established to allow system evaluation. This paper discusses some of the problems, the system modifications involved, and early results in establishing wiring harness and interface susceptibility requirements.

42 CFR 483.136 - Evaluating whether an individual with mental retardation requires specialized services (PASARR/MR).

Code of Federal Regulations, 2010 CFR

2010-10-01

... functional capacity; (10) Social development, such as interpersonal skills, recreation-leisure skills, and...) Learn new skills without aggressive and consistent training; (F) Apply skills learned in a training situation to other environments or settings without aggressive and consistent training; (G) Demonstrate...

Report on the Audit of Materials Technology

DTIC Science & Technology

1990-01-25

We are providing this report on the Audit of Materials Technology for your information and use. No comments were required or received on the draft...report. The audit was made from July through September 1989. The objectives of the audit were to evaluate the missions and functions assigned to DOD

A Descriptive Evaluation of Long-Term Treatment Integrity

ERIC Educational Resources Information Center

Arkoosh, Maire Kathryn; Derby, K. Mark; Wacker, David P.; Berg, Wendy; McLaughlin, T. F.; Barretto, Anjali

2007-01-01

The validity of selecting treatment contingencies on the basis of the results obtained through functional analysis is well documented. However, a number of second-generation questions have emerged: For example, what are the parameters required to achieve desired treatment outcomes? More specifically, what is the degree of treatment integrity…

Matriculation, Degree Structures, and Levels of Student Thinking.

ERIC Educational Resources Information Center

Collis, Kevin F.; Biggs, John B.

1983-01-01

The functions of Australian higher education institutions are examined in terms of the knowledge and skill needs of each sector. A new evaluation technique that clarifies the complexity of student thinking required at each level is applied to the programs, producing a rationale for admission and degree structure. (MSE)

Evaluating Chemical Dispersant Efficacy In An Experimental Wave Tank: 1, Dispersant Effectiveness As A Function Of Energy Dissipation Rate

EPA Science Inventory

Numerous laboratory test systems have been developed for the comparison of efficacy between various chemical oil dispersant formulations. However, for the assessment of chemical dispersant effectiveness under realistic sea state, test protocols are required to produce hydrodynam...

48 CFR 736.602-3 - Evaluation board functions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... industry with respect to such factors as control of costs, quality of work, and ability to meet schedules, to the extent such information is available; (4) Ability to assign an adequate number of qualified... architect-engineer is able to perform with its own forces when required; (6) Ability of the architect...

48 CFR 736.602-3 - Evaluation board functions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... industry with respect to such factors as control of costs, quality of work, and ability to meet schedules, to the extent such information is available; (4) Ability to assign an adequate number of qualified... architect-engineer is able to perform with its own forces when required; (6) Ability of the architect...

48 CFR 736.602-3 - Evaluation board functions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... industry with respect to such factors as control of costs, quality of work, and ability to meet schedules, to the extent such information is available; (4) Ability to assign an adequate number of qualified... architect-engineer is able to perform with its own forces when required; (6) Ability of the architect...

Impact of ground speed and varying seeding rates on meter performance

USDA-ARS?s Scientific Manuscript database

Achieving optimum planter performance is an important requirement for obtaining higher crop yields. Planter performance depends on several factors but meter speed is an important one which is a function of ground speed, seeding rate and row spacing. A study was conducted to evaluate the influence of...

The impact of pancreaticoduodenectomy on endocrine and exocrine pancreatic function: A prospective cohort study based on pre- and postoperative function tests.

PubMed

Roeyen, Geert; Jansen, Miet; Hartman, Vera; Chapelle, Thiery; Bracke, Bart; Ysebaert, Dirk; De Block, Christophe

Studies reporting on function after pancreatic surgery are frequently based on diabetes history, fasting glycemia or random glycemia. The aim of this study was to investigate prospectively the evolution of pancreatic function in patients undergoing pancreaticoduodenectomy based on proper pre- and postoperative function tests. It was hypothesised that pancreatic function deteriorates after pancreaticoduodenectomy. Between 2013 and 2016, 78 patients undergoing pancreaticoduodenectomy for oncologic indications had a prospective evaluation of their endocrine and exocrine pancreatic function. Endocrine function was evaluated with the 75 g oral glucose tolerance test (OGTT) and the 1 mg intravenous glucagon test. Exocrine function was evaluated with a 13C-labelled mixed-triglyceride breath test. Tests were performed pre- and postoperatively. In 90.5% (19/21) of patients with preoperatively known diabetes, no change in endocrine function was observed. In contrast, endocrine function improved in 68.1% (15/22) of patients with newly diagnosed diabetes. 40% (14/35) of patients with a preoperative normal OGTT or prediabetes experienced deterioration in function. In multivariate analysis, improvement of newly diagnosed diabetes was correlated with preoperative bilirubin levels (p = 0.045), while progression towards diabetes was correlated with preoperative C-peptidogenic index T 30 (p = 0.037). A total of 20.5% (16/78) of patients had pancreatic exocrine insufficiency preoperatively. Another 51.3% (40/78) of patients deteriorated on exocrine level. In total, 64.1% (50/78) of patients required pancreatic enzyme-replacement therapy postoperatively. Although deterioration of endocrine function was expected after pancreatic resection, improvement is frequently observed in patients with newly diagnosed diabetes. Exocrine function deteriorates after pancreaticoduodenectomy. Copyright © 2017 IAP and EPC. Published by Elsevier B.V. All rights reserved.

Radiographic and functional evaluation of low profile dorsal versus volar plating for distal radius fractures.

PubMed

Kumar, Sanjay; Khan, A N; Sonanis, S V

2016-12-01

Fracture of the distal radius is a common clinical problem. Complex fracture requires open reduction and stabilization with plating to restore anatomy. Dorsal plating has advantages of buttressing the fracture better but often complicated with tendon problems as per literature. The rate of complications however, was not compared between the low-profile dorsal and the volar plates. This was a retrospective study on seventy one patients with dorsally angulated or displaced distal radius fractures, who underwent fixation of fractures with either dorsal or volar locking plate from Jan - Nov 2012. Preoperative radiographs were classified based on Universal and Fernandez classification. Postoperative radiographs were assessed for anatomical restoration of Radial length, radial inclination and volar tilt. Tendon and nerve related complications were assessed and functional evaluation was performed on the basis of PRWE (Patient related wrist evaluation) score. Both groups were matched for their demographic profile and fracture types (p 0.033). Dorsal plating group had 89% excellent/good restoration and fair in 11%. Volar group had 96% excellent/good restoration and fair in 4%. Statistical analysis was performed with unpaired t test for radiographic parameters. Three patients had tendon related complications in dorsal plating group; two patients in volar group had nerve related complications. Functional outcome with PRWE was comparable between two groups. Results with low profile dorsal plating were comparable to volar plating. Therefore dorsal plating can be used as an alternative method when dorsal buttressing of comminuted fracture is required, especially with concomitant osteoporosis.

Remember Hard But Think Softly: Metaphorical Effects of Hardness/Softness on Cognitive Functions.

PubMed

Xie, Jiushu; Lu, Zhi; Wang, Ruiming; Cai, Zhenguang G

2016-01-01

Previous studies have found that bodily stimulation, such as hardness biases social judgment and evaluation via metaphorical association; however, it remains unclear whether bodily stimulation also affects cognitive functions, such as memory and creativity. The current study used metaphorical associations between "hard" and "rigid" and between "soft" and "flexible" in Chinese, to investigate whether the experience of hardness affects cognitive functions whose performance depends prospectively on rigidity (memory) and flexibility (creativity). In Experiment 1, we found that Chinese-speaking participants performed better at recalling previously memorized words while sitting on a hard-surface stool (the hard condition) than a cushioned one (the soft condition). In Experiment 2, participants sitting on a cushioned stool outperformed those sitting on a hard-surface stool on a Chinese riddle task, which required creative/flexible thinking, but not on an analogical reasoning task, which required both rigid and flexible thinking. The results suggest the hardness experience affects cognitive functions that are metaphorically associated with rigidity or flexibility. They support the embodiment proposition that cognitive functions and representations can be grounded in bodily states via metaphorical associations.

Functionalised particles using dry powder coating in pharmaceutical drug delivery: promises and challenges.

PubMed

Dahmash, Eman Z; Mohammed, Afzal R

2015-01-01

Production of functionalised particles using dry powder coating is a one-step, environmentally friendly process that paves the way for the development of particles with targeted properties and diverse functionalities. Applying the first principles in physical science for powders, fine guest particles can be homogeneously dispersed over the surface of larger host particles to develop functionalised particles. Multiple functionalities can be modified including: flowability, dispersibility, fluidisation, homogeneity, content uniformity and dissolution profile. The current publication seeks to understand the fundamental underpinning principles and science governing dry coating process, evaluate key technologies developed to produce functionalised particles along with outlining their advantages, limitations and applications and discusses in detail the resultant functionalities and their applications. Dry particle coating is a promising solvent-free manufacturing technology to produce particles with targeted functionalities. Progress within this area requires the development of continuous processing devices that can overcome challenges encountered with current technologies such as heat generation and particle attrition. Growth within this field requires extensive research to further understand the impact of process design and material properties on resultant functionalities.

A model for evaluating academic research centers: Case study of the Asian/Pacific Islander Youth Violence Prevention Center.

PubMed

Nishimura, Stephanie T; Hishinuma, Earl S; Goebert, Deborah A; Onoye, Jane M M; Sugimoto-Matsuda, Jeanelle J

2018-02-01

To provide one model for evaluating academic research centers, given their vital role in addressing public health issues. A theoretical framework is described for a comprehensive evaluation plan for research centers. This framework is applied to one specific center by describing the center's Logic Model and Evaluation Plan, including a sample of the center's activities. Formative and summative evaluation information is summarized. In addition, a summary of outcomes is provided: improved practice and policy; reduction of risk factors and increase in protective factors; reduction of interpersonal youth violence in the community; and national prototype for prevention of interpersonal youth violence. Research centers are important mechanisms to advance science and improve people's quality of life. Because of their more infrastructure-intensive and comprehensive approach, they also require substantial resources for success, and thus, also require careful accountability. It is therefore important to comprehensively evaluate these centers. As provided herein, a more systematic and structured approach utilizing logic models, an evaluation plan, and successful processes can provide research centers with a functionally useful method in their evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

NEW LIFE FOR OLD SCHOOLS. REPORT OF A WORKSHOP FOR REPRESENTATIVES OF THE GREAT CITIES IN RELATION TO THE SPRING CONFERENCE OF THE RESEARCH COUNCIL OF THE GREAT CITIES PROGRAM FOR SCHOOL IMPROVEMENT, (NEW YORK, MAY 1, 1965).

ERIC Educational Resources Information Center

Great Cities Research Council, Chicago, IL.

A SERIES OF REPORTS ON THE CRITERIA FOR EVALUATING AND PROCEDURES FOR SAVING OLDER SCHOOL BUILDINGS STATES POPULATION NECESSARY, ECONOMIC NECESSITY AND SENTIMENT ARE MAIN REASONS FOR RETAINING OLDER STRUCTURES. THE ADEQUACY OF THE BUILDINGS SHOULD BE EVALUATED IN TERMS OF EDUCATIONAL REQUIREMENTS, ADMINISTRATIVE FUNCTIONS, SAFETY, OPERATIONS AND…

Advanced software techniques for data management systems. Volume 3: Programming language characteristics and comparison reference

NASA Technical Reports Server (NTRS)

James, T. A.; Hall, B. C.; Newbold, P. M.

1972-01-01

A comparative evaluation was made of eight higher order languages of general interest in the aerospace field: PL/1; HAL; JOVIAL/J3; SPL/J6; CLASP; ALGOL 60; FORTRAN 4; and MAC360. A summary of the functional requirements for a language for general use in manned aerodynamic applications is presented. The evaluation supplies background material to be used in assessing the worth of each language for some particular application.

Integrated Analysis of Flow, Form, and Function for River Management and Design Testing

NASA Astrophysics Data System (ADS)

Lane, B. A. A.; Pasternack, G. B.; Sandoval Solis, S.

2017-12-01

Rivers are highly complex, dynamic systems that support numerous ecosystem functions including transporting sediment, modulating biogeochemical processes, and regulating habitat availability for native species. The extent and timing of these functions is largely controlled by the interplay of hydrologic dynamics (i.e. flow) and the shape and composition of the river corridor (i.e. form). This study applies synthetic channel design to the evaluation of river flow-form-function linkages, with the aim of evaluating these interactions across a range of flows and forms to inform process-driven management efforts with limited data and financial requirements. In an application to California's Mediterranean-montane streams, the interacting roles of channel form, water year type, and hydrologic impairment were evaluated across a suite of ecosystem functions related to hydrogeomorphic processes, aquatic habitat, and riparian habitat. Channel form acted as the dominant control on hydrogeomorphic processes considered, while water year type controlled salmonid habitat functions. Streamflow alteration for hydropower increased redd dewatering risk and altered aquatic habitat availability and riparian recruitment dynamics. Study results highlight critical tradeoffs in ecosystem function performance and emphasize the significance of spatiotemporal diversity of flow and form at multiple scales for maintaining river ecosystem integrity. The approach is broadly applicable and extensible to other systems and ecosystem functions, where findings can be used to characterize complex controls on river ecosystems, assess impacts of proposed flow and form alterations, and inform river restoration strategies.

Functional Fitness Testing Results Following Long-Duration ISS Missions.

PubMed

Laughlin, Mitzi S; Guilliams, Mark E; Nieschwitz, Bruce A; Hoellen, David

2015-12-01

Long-duration spaceflight missions lead to the loss of muscle strength and endurance. Significant reduction in muscle function can be hazardous when returning from spaceflight. To document these losses, NASA developed medical requirements that include measures of functional strength and endurance. Results from this Functional Fitness Test (FFT) battery are also used to evaluate the effectiveness of in-flight exercise countermeasures. The purpose of this paper is to document results from the FFT and correlate this information with performance of in-flight exercise on board the International Space Station. The FFT evaluates muscular strength and endurance, flexibility, and agility and includes the following eight measures: sit and reach, cone agility, push-ups, pull-ups, sliding crunches, bench press, leg press, and hand grip dynamometry. Pre- to postflight functional fitness measurements were analyzed using dependent t-tests and correlation analyses were used to evaluate the relationship between functional fitness measurements and in-flight exercise workouts. Significant differences were noted post space flight with the sit and reach, cone agility, leg press, and hand grip measurements while other test scores were not significantly altered. The relationships between functional fitness and in-flight exercise measurements showed minimal to moderate correlations for most in-flight exercise training variables. The change in FFT results can be partially explained by in-flight exercise performance. Although there are losses documented in the FFT results, it is important to realize that the crewmembers are successfully performing activities of daily living and are considered functional for normal activities upon return to Earth.

Innovative Product Design Based on Comprehensive Customer Requirements of Different Cognitive Levels

PubMed Central

Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach. PMID:25013862

Innovative product design based on comprehensive customer requirements of different cognitive levels.

PubMed

Li, Xiaolong; Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach.

Space station needs, attributes and architectural options: Study summary

NASA Technical Reports Server (NTRS)

1983-01-01

Space station needs, attributes, and architectural options that affect the future implementation and design of a space station system are examined. Requirements for candidate missions are used to define functional attributes of a space station. Station elements that perform these functions form the basic station architecture. Alternative ways to accomplish these functions are defined and configuration concepts are developed and evaluated. Configuration analyses are carried to the point that budgetary cost estimates of alternate approaches could be made. Emphasis is placed on differential costs for station support elements and benefits that accrue through use of the station.

Application-oriented architecture for multimedia teleservices

NASA Astrophysics Data System (ADS)

Vanrijssen, Erwin; Widya, Ing; Michiels, Eddie

This paper looks into communications capabilities that are required by distributed multimedia applications to achieve relation preserving information exchange. These capabilities are derived by analyzing the notion of 'information exchange' and are embodied in communications functionalities. To emphasize the importance of the users' view, a top-down approach is applied. The revised Open Systems Interconnection (OSI) Application Layer Structure (OSI-ALS) is used to model the communications functionalities and to develop an architecture for composition of multimedia teleservices with these functionalities. This work may therefore be considered an exercise to evaluate the suitability of OSI-ALS for composition of multimedia teleservices.

Configuration management plan. System definition and project development. Repository Based Software Engineering (RBSE) program

NASA Technical Reports Server (NTRS)

Mckay, Charles

1991-01-01

This is the configuration management Plan for the AdaNet Repository Based Software Engineering (RBSE) contract. This document establishes the requirements and activities needed to ensure that the products developed for the AdaNet RBSE contract are accurately identified, that proposed changes to the product are systematically evaluated and controlled, that the status of all change activity is known at all times, and that the product achieves its functional performance requirements and is accurately documented.

Efficiency of unconstrained minimization techniques in nonlinear analysis

NASA Technical Reports Server (NTRS)

Kamat, M. P.; Knight, N. F., Jr.

1978-01-01

Unconstrained minimization algorithms have been critically evaluated for their effectiveness in solving structural problems involving geometric and material nonlinearities. The algorithms have been categorized as being zeroth, first, or second order depending upon the highest derivative of the function required by the algorithm. The sensitivity of these algorithms to the accuracy of derivatives clearly suggests using analytically derived gradients instead of finite difference approximations. The use of analytic gradients results in better control of the number of minimizations required for convergence to the exact solution.

Performance Mapping Studies in Redox Flow Cells

NASA Technical Reports Server (NTRS)

Hoberecht, M. A.; Thaller, L. H.

1981-01-01

Pumping power requirements in any flow battery system constitute a direct parasitic energy loss. It is therefore useful to determine the practical lower limit for reactant flow rates. Through the use of a theoretical framework based on electrochemical first principles, two different experimental flow mapping techniques were developed to evaluate and compare electrodes as a function of flow rate. For the carbon felt electrodes presently used in NASA-Lewis Redox cells, a flow rate 1.5 times greater than the stoichiometric rate seems to be the required minimum.

Mechanical Harvesting of Aquatic Plants. Report 2. Evaluation of Selected Handling Functions of Mechanical Control.

DTIC Science & Technology

1980-06-01

with the extracted plants. Pusher boats were used to feed the plants into the throat of the conveyor where they were then pulled onto the conveyor by...technique or variations of it that involve extracting from the river periodically on the Withlacoochee River or similar rivers, requires 48 that operations...way to readily estimate the land area required to stockpile the large volumes of material that must be extracted from the water in many operational

MCC level C formulation requirements. Shuttle TAEM targeting

NASA Technical Reports Server (NTRS)

Carman, G. L.; Montez, M. N.

1980-01-01

The level C requirements for the shuttle orbiter terminal area energy management (TAEM) guidance and flight control functions to be incorporated into the Mission Control Center entry profile planning processor are described. This processor is used for preentry evaluation of the entry through landing maneuvers, and includes a simplified three degree-of-freedom model of the body rotational dynamics that is necessary to account for the effects of attitude response on the trajectory dynamics. This simulation terminates at TAEM-autoland interface.

What makes an automated teller machine usable by blind users?

PubMed

Manzke, J M; Egan, D H; Felix, D; Krueger, H

1998-07-01

Fifteen blind and sighted subjects, who featured as a control group for acceptance, were asked for their requirements for automated teller machines (ATMs). Both groups also tested the usability of a partially operational ATM mock-up. This machine was based on an existing cash dispenser, providing natural speech output, different function menus and different key arrangements. Performance and subjective evaluation data of blind and sighted subjects were collected. All blind subjects were able to operate the ATM successfully. The implemented speech output was the main usability factor for them. The different interface designs did not significantly affect performance and subjective evaluation. Nevertheless, design recommendations can be derived from the requirement assessment. The sighted subjects were rather open for design modifications, especially the implementation of speech output. However, there was also a mismatch of the requirements of the two subject groups, mainly concerning the key arrangement.

Importance and globalization status of good manufacturing practice (GMP) requirements for pharmaceutical excipients

PubMed Central

Abdellah, Abubaker; Noordin, Mohamed Ibrahim; Wan Ismail, Wan Azman

2013-01-01

Pharmaceutical excipients are no longer inert materials but it is effective and able to improve the characteristics of the products’ quality, stability, functionality, safety, solubility and acceptance of patients. It can interact with the active ingredients and alter the medicament characteristics. The globalization of medicines’ supply enhances the importance of globalized good manufacturing practice (GMP) requirements for pharmaceutical excipients. This review was intended to assess the globalization status of good manufacturing practice (GMP) requirements for pharmaceutical excipients. The review outcomes demonstrate that there is a lack of accurately defined methods to evaluate and measure excipients’ safety. Furthermore good manufacturing practice requirements for excipients are not effectively globalized. PMID:25685037

Mobile Phone-Based Joint Angle Measurement for Functional Assessment and Rehabilitation of Proprioception

PubMed Central

Mourcou, Quentin; Fleury, Anthony; Diot, Bruno; Franco, Céline; Vuillerme, Nicolas

2015-01-01

Assessment of joint functional and proprioceptive abilities is essential for balance, posture, and motor control rehabilitation. Joint functional ability refers to the capacity of movement of the joint. It may be evaluated thereby measuring the joint range of motion (ROM). Proprioception can be defined as the perception of the position and of the movement of various body parts in space. Its role is essential in sensorimotor control for movement acuity, joint stability, coordination, and balance. Its clinical evaluation is commonly based on the assessment of the joint position sense (JPS). Both ROM and JPS measurements require estimating angles through goniometer, scoliometer, laser-pointer, and bubble or digital inclinometer. With the arrival of Smartphones, these costly clinical tools tend to be replaced. Beyond evaluation, maintaining and/or improving joint functional and proprioceptive abilities by training with physical therapy is important for long-term management. This review aims to report Smartphone applications used for measuring and improving functional and proprioceptive abilities. It identifies that Smartphone applications are reliable for clinical measurements and are mainly used to assess ROM and JPS. However, there is lack of studies on Smartphone applications which can be used in an autonomous way to provide physical therapy exercises at home. PMID:26583101

A new look at the simultaneous analysis and design of structures

NASA Technical Reports Server (NTRS)

Striz, Alfred G.

1994-01-01

The minimum weight optimization of structural systems, subject to strength and displacement constraints as well as size side constraints, was investigated by the Simultaneous ANalysis and Design (SAND) approach. As an optimizer, the code NPSOL was used which is based on a sequential quadratic programming (SQP) algorithm. The structures were modeled by the finite element method. The finite element related input to NPSOL was automatically generated from the input decks of such standard FEM/optimization codes as NASTRAN or ASTROS, with the stiffness matrices, at present, extracted from the FEM code ANALYZE. In order to avoid ill-conditioned matrices that can be encountered when the global stiffness equations are used as additional nonlinear equality constraints in the SAND approach (with the displacements as additional variables), the matrix displacement method was applied. In this approach, the element stiffness equations are used as constraints instead of the global stiffness equations, in conjunction with the nodal force equilibrium equations. This approach adds the element forces as variables to the system. Since, for complex structures and the associated large and very sparce matrices, the execution times of the optimization code became excessive due to the large number of required constraint gradient evaluations, the Kreisselmeier-Steinhauser function approach was used to decrease the computational effort by reducing the nonlinear equality constraint system to essentially a single combined constraint equation. As the linear equality and inequality constraints require much less computational effort to evaluate, they were kept in their previous form to limit the complexity of the KS function evaluation. To date, the standard three-bar, ten-bar, and 72-bar trusses have been tested. For the standard SAND approach, correct results were obtained for all three trusses although convergence became slower for the 72-bar truss. When the matrix displacement method was used, correct results were still obtained, but the execution times became excessive due to the large number of constraint gradient evaluations required. Using the KS function, the computational effort dropped, but the optimization seemed to become less robust. The investigation of this phenomenon is continuing. As an alternate approach, the code MINOS for the optimization of sparse matrices can be applied to the problem in lieu of the Kreisselmeier-Steinhauser function. This investigation is underway.

Computationally inexpensive identification of noninformative model parameters by sequential screening

NASA Astrophysics Data System (ADS)

Cuntz, Matthias; Mai, Juliane; Zink, Matthias; Thober, Stephan; Kumar, Rohini; Schäfer, David; Schrön, Martin; Craven, John; Rakovec, Oldrich; Spieler, Diana; Prykhodko, Vladyslav; Dalmasso, Giovanni; Musuuza, Jude; Langenberg, Ben; Attinger, Sabine; Samaniego, Luis

2015-08-01

Environmental models tend to require increasing computational time and resources as physical process descriptions are improved or new descriptions are incorporated. Many-query applications such as sensitivity analysis or model calibration usually require a large number of model evaluations leading to high computational demand. This often limits the feasibility of rigorous analyses. Here we present a fully automated sequential screening method that selects only informative parameters for a given model output. The method requires a number of model evaluations that is approximately 10 times the number of model parameters. It was tested using the mesoscale hydrologic model mHM in three hydrologically unique European river catchments. It identified around 20 informative parameters out of 52, with different informative parameters in each catchment. The screening method was evaluated with subsequent analyses using all 52 as well as only the informative parameters. Subsequent Sobol's global sensitivity analysis led to almost identical results yet required 40% fewer model evaluations after screening. mHM was calibrated with all and with only informative parameters in the three catchments. Model performances for daily discharge were equally high in both cases with Nash-Sutcliffe efficiencies above 0.82. Calibration using only the informative parameters needed just one third of the number of model evaluations. The universality of the sequential screening method was demonstrated using several general test functions from the literature. We therefore recommend the use of the computationally inexpensive sequential screening method prior to rigorous analyses on complex environmental models.

Computationally inexpensive identification of noninformative model parameters by sequential screening

NASA Astrophysics Data System (ADS)

Mai, Juliane; Cuntz, Matthias; Zink, Matthias; Thober, Stephan; Kumar, Rohini; Schäfer, David; Schrön, Martin; Craven, John; Rakovec, Oldrich; Spieler, Diana; Prykhodko, Vladyslav; Dalmasso, Giovanni; Musuuza, Jude; Langenberg, Ben; Attinger, Sabine; Samaniego, Luis

2016-04-01

Environmental models tend to require increasing computational time and resources as physical process descriptions are improved or new descriptions are incorporated. Many-query applications such as sensitivity analysis or model calibration usually require a large number of model evaluations leading to high computational demand. This often limits the feasibility of rigorous analyses. Here we present a fully automated sequential screening method that selects only informative parameters for a given model output. The method requires a number of model evaluations that is approximately 10 times the number of model parameters. It was tested using the mesoscale hydrologic model mHM in three hydrologically unique European river catchments. It identified around 20 informative parameters out of 52, with different informative parameters in each catchment. The screening method was evaluated with subsequent analyses using all 52 as well as only the informative parameters. Subsequent Sobol's global sensitivity analysis led to almost identical results yet required 40% fewer model evaluations after screening. mHM was calibrated with all and with only informative parameters in the three catchments. Model performances for daily discharge were equally high in both cases with Nash-Sutcliffe efficiencies above 0.82. Calibration using only the informative parameters needed just one third of the number of model evaluations. The universality of the sequential screening method was demonstrated using several general test functions from the literature. We therefore recommend the use of the computationally inexpensive sequential screening method prior to rigorous analyses on complex environmental models.

Evaluating performance of a Lead Road Safety Agency (LRSA) in a low-income country: a case study from Pakistan.

PubMed

Bhatti, Junaid A; Ahmed, Aizaz

2014-01-01

The World Health Organization recommends identifying a Lead Road Safety Agency (LRSA) within the government to coordinate preventive interventions. As LRSAs in developing countries have rarely been evaluated, this case study describes the performance of the LRSA of Pakistan with respect to the World Bank criteria. The designated LRSA, the National Road Safety Secretariat, was put into operation in 2006 and worked for about two years with World Bank funding. The agency had a stand-alone structure headed by an experienced road safety specialist during the first year only and faced difficulty in recruiting other required experts. The LRSA drafted the first National Road Safety Plan, including strategic review of road safety and existing legislation, articulated multisectorial collaboration nationally and provincially, and collected traffic injury data in some districts. Its progress was halted by its dissolution because of funding problems. Currently, two agencies specialising in traffic enforcement and transport research respectively are fulfilling LRSA functions on an ad-hoc basis. Results suggest that sustainability and consistency of LRSAs in developing countries like Pakistan may only be ensured if they are legally protected, inter-ministerial, have permanent funding and are provided with the required expertise through international cooperation, so they can perform their required functions effectively.

Normative Data for an Instrumental Assessment of the Upper-Limb Functionality.

PubMed

Caimmi, Marco; Guanziroli, Eleonora; Malosio, Matteo; Pedrocchi, Nicola; Vicentini, Federico; Molinari Tosatti, Lorenzo; Molteni, Franco

2015-01-01

Upper-limb movement analysis is important to monitor objectively rehabilitation interventions, contributing to improving the overall treatments outcomes. Simple, fast, easy-to-use, and applicable methods are required to allow routinely functional evaluation of patients with different pathologies and clinical conditions. This paper describes the Reaching and Hand-to-Mouth Evaluation Method, a fast procedure to assess the upper-limb motor control and functional ability, providing a set of normative data from 42 healthy subjects of different ages, evaluated for both the dominant and the nondominant limb motor performance. Sixteen of them were reevaluated after two weeks to perform test-retest reliability analysis. Data were clustered into three subgroups of different ages to test the method sensitivity to motor control differences. Experimental data show notable test-retest reliability in all tasks. Data from older and younger subjects show significant differences in the measures related to the ability for coordination thus showing the high sensitivity of the method to motor control differences. The presented method, provided with control data from healthy subjects, appears to be a suitable and reliable tool for the upper-limb functional assessment in the clinical environment.

Normative Data for an Instrumental Assessment of the Upper-Limb Functionality

PubMed Central

Caimmi, Marco; Guanziroli, Eleonora; Malosio, Matteo; Pedrocchi, Nicola; Vicentini, Federico; Molinari Tosatti, Lorenzo; Molteni, Franco

2015-01-01

Upper-limb movement analysis is important to monitor objectively rehabilitation interventions, contributing to improving the overall treatments outcomes. Simple, fast, easy-to-use, and applicable methods are required to allow routinely functional evaluation of patients with different pathologies and clinical conditions. This paper describes the Reaching and Hand-to-Mouth Evaluation Method, a fast procedure to assess the upper-limb motor control and functional ability, providing a set of normative data from 42 healthy subjects of different ages, evaluated for both the dominant and the nondominant limb motor performance. Sixteen of them were reevaluated after two weeks to perform test-retest reliability analysis. Data were clustered into three subgroups of different ages to test the method sensitivity to motor control differences. Experimental data show notable test-retest reliability in all tasks. Data from older and younger subjects show significant differences in the measures related to the ability for coordination thus showing the high sensitivity of the method to motor control differences. The presented method, provided with control data from healthy subjects, appears to be a suitable and reliable tool for the upper-limb functional assessment in the clinical environment. PMID:26539500

Pulmonary function and bronchial hyperreactivity in asthmatic children with house dust mite allergy during prolonged stay in the Italian Alps (Misurina, 1756 m).

PubMed

Boner, A L; Niero, E; Antolini, I; Valletta, E A; Gaburro, D

1985-01-01

The effects of high altitude were evaluated in 14 children with allergic bronchial asthma over an 8-month period. Clinical improvement, as assessed by decreased bronchial lability, was demonstrated by pulmonary function studies. There was a decreased requirement for drugs and steroids were discontinued in our children. The results of this study suggest the use of this approach as a possible adjunct to the management of refractory cases of bronchial asthma.

A technique for increasing the accuracy of the numerical inversion of the Laplace transform with applications

NASA Technical Reports Server (NTRS)

Berger, B. S.; Duangudom, S.

1973-01-01

A technique is introduced which extends the range of useful approximation of numerical inversion techniques to many cycles of an oscillatory function without requiring either the evaluation of the image function for many values of s or the computation of higher-order terms. The technique consists in reducing a given initial value problem defined over some interval into a sequence of initial value problems defined over a set of subintervals. Several numerical examples demonstrate the utility of the method.

Scaling a Human Body Finite Element Model with Radial Basis Function Interpolation

DTIC Science & Technology

Human body models are currently used to evaluate the body’s response to a variety of threats to the Soldier. The ability to adjust the size of human...body models is currently limited because of the complex shape changes that are required. Here, a radial basis function interpolation method is used to...morph the shape on an existing finite element mesh. Tools are developed and integrated into the Blender computer graphics software to assist with

Design criteria for a self-actuated shutdown system to ensure limitation of core damage. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deane, N.A.; Atcheson, D.B.

1981-09-01

Safety-based functional requirements and design criteria for a self-actuated shutdown system (SASS) are derived in accordance with LOA-2 success criteria and reliability goals. The design basis transients have been defined and evaluated for the CDS Phase II design, which is a 2550 MWt mixed oxide heterogeneous core reactor. A partial set of reactor responses for selected transients is provided as a function of SASS characteristics such as reactivity worth, trip points, and insertion times.

Segmenting healthcare terminology users: a strategic approach to large scale evolutionary development.

PubMed

Price, C; Briggs, K; Brown, P J

1999-01-01

Healthcare terminologies have become larger and more complex, aiming to support a diverse range of functions across the whole spectrum of healthcare activity. Prioritization of development, implementation and evaluation can be achieved by regarding the "terminology" as an integrated system of content-based and functional components. Matching these components to target segments within the healthcare community, supports a strategic approach to evolutionary development and provides essential product differentiation to enable terminology providers and systems suppliers to focus on end-user requirements.

Platelet Function Analyzed by Light Transmission Aggregometry.

PubMed

Hvas, Anne-Mette; Favaloro, Emmanuel J

2017-01-01

Analysis of platelet function is widely used for diagnostic work-up in patients with increased bleeding tendency. During the last decades, platelet function testing has also been introduced for evaluation of antiplatelet therapy, but this is still recommended for research purposes only. Platelet function can also be assessed for hyper-aggregability, but this is less often evaluated. Light transmission aggregometry (LTA) was introduced in the early 1960s and has since been considered the gold standard. This optical detection system is based on changes in turbidity measured as a change in light transmission, which is proportional to the extent of platelet aggregation induced by addition of an agonist. LTA is a flexible method, as different agonists can be used in varying concentrations, but performance of the test requires large blood volumes and experienced laboratory technicians as well as specialized personal to interpret results. In the present chapter, a protocol for LTA is described including all steps from pre-analytical preparation to interpretation of results.

Multipurpose Crew Restraints for Long Duration Space Flights

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Baggerman, Susan; Ortiz, M. R.; Hua, L.; Sinnott, P.; Webb, L.

2004-01-01

With permanent human presence onboard the International Space Station (ISS), a crew will be living and working in microgravity, interfacing with their physical environment. Without optimum restraints and mobility aids (R&MA' s), the crewmembers may be handicapped for perfonning some of the on-orbit tasks. In addition to weightlessness, the confined nature of a spacecraft environment results in ergonomic challenges such as limited visibility and access to the activity area and may cause prolonged periods of unnatural postures. Thus, determining the right set of human factors requirements and providing an ergonomically designed environment are crucial to astronauts' well-being and productivity. The purpose of this project is to develop requirements and guidelines, and conceptual designs, for an ergonomically designed multi-purpose crew restraint. In order to achieve this goal, the project would involve development of functional and human factors requirements, design concept prototype development, analytical and computer modeling evaluations of concepts, two sets of micro gravity evaluations and preparation of an implementation plan. It is anticipated that developing functional and design requirements for a multi-purpose restraint would facilitate development of ergonomically designed restraints to accommodate the off-nominal but repetitive tasks, and minimize the performance degradation due to lack of optimum setup for onboard task performance. In addition, development of an ergonomically designed restraint concept prototype would allow verification and validation of the requirements defined. To date, we have identified "unique" tasks and areas of need, determine characteristics of "ideal" restraints, and solicit ideas for restraint and mobility aid concepts. Focus group meetings with representatives from training, safety, crew, human factors, engineering, payload developers, and analog environment representatives were key to assist in the development of a restraint concept based on previous flight experiences, the needs of future tasks, and crewmembers' preferences. Also, a catalog with existing IVA/EVA restraint and mobility aids has been developed. Other efforts included the ISS crew debrief data on restraints, compilation of data from MIR, Skylab and ISS on restraints, and investigating possibility of an in-flight evaluation of current restraint systems. Preliminary restraint concepts were developed and presented to long duration crewmembers and focus groups for feedback. Currently, a selection criterion is being refined for prioritizing the candidate concepts. Next steps include analytical and computer modeling evaluations of the selected candidate concepts, prototype development, and microgravity evaluations.

Representations and uses of light distribution functions

NASA Astrophysics Data System (ADS)

Lalonde, Paul Albert

1998-11-01

At their lowest level, all rendering algorithms depend on models of local illumination to define the interplay of light with the surfaces being rendered. These models depend both on the representations of light scattering at a surface due to reflection and to an equal extent on the representation of light sources and light fields. Both emission and reflection have in common that they describe how light leaves a surface as a function of direction. Reflection also depends on an incident light direction. Emission can depend on the position on the light source We call the functions representing emission and reflection light distribution functions (LDF's). There are some difficulties to using measured light distribution functions. The data sets are very large-the size of the data grows with the fourth power of the sampling resolution. For example, a bidirectional reflectance distribution function (BRDF) sampled at five degrees angular resolution, which is arguably insufficient to capture highlights and other high frequency effects in the reflection, can easily require one and a half million samples. Once acquired this data requires some form of interpolation to use them. Any compression method used must be efficient, both in space and in the time required to evaluate the function at a point or over a range of points. This dissertation examines a wavelet representation of light distribution functions that addresses these issues. A data structure is presented that allows efficient reconstruction of LDFs for a given set of parameters, making the wavelet representation feasible for rendering tasks. Texture mapping methods that take advantage of our LDF representations are examined, as well as techniques for filtering LDFs, and methods for using wavelet compressed bidirection reflectance distribution functions (BRDFs) and light sources with Monte Carlo path tracing algorithms. The wavelet representation effectively compresses BRDF and emission data while inducing only a small error in the reconstructed signal. The representation can be used to evaluate efficiently some integrals that appear in shading computation which allows fast, accurate computation of local shading. The representation can be used to represent light fields and is used to reconstruct views of environments interactively from a precomputed set of views. The representation of the BRDF also allows the efficient generation of reflected directions for Monte Carlo array tracing applications. The method can be integrated into many different global illumination algorithms, including ray tracers and wavelet radiosity systems.

Traditional versus rule-based programming techniques - Application to the control of optional flight information

NASA Technical Reports Server (NTRS)

Ricks, Wendell R.; Abbott, Kathy H.

1987-01-01

A traditional programming technique for controlling the display of optional flight information in a civil transport cockpit is compared to a rule-based technique for the same function. This application required complex decision logic and a frequently modified rule base. The techniques are evaluated for execution efficiency and implementation ease; the criterion used to calculate the execution efficiency is the total number of steps required to isolate hypotheses that were true and the criteria used to evaluate the implementability are ease of modification and verification and explanation capability. It is observed that the traditional program is more efficient than the rule-based program; however, the rule-based programming technique is more applicable for improving programmer productivity.

Regulating biopharmaceuticals under CDER versus CBER: an insider's perspective.

PubMed

Schwieterman, William D

2006-10-01

The FDA has recently transferred jurisdiction for the regulation of certain biopharmaceuticals from the Center for Biologics, Evaluation and Research to the Center for Drugs, Evaluation and Research, where they will be reviewed in the same FDA divisions as are traditional pharmaceutical agents. With this transfer, sponsors of investigational biopharmaceuticals should expect changes in the regulatory requirements the FDA imposes on the clinical development plans, including an increase in the size and number of pivotal studies; more consistent requirements for conducting preclinical tests in two animal species; increased emphasis on organ structure and function as components of primary endpoints; more emphasis on characterizing dose-ranging and pharmacology; more intense scrutinizing of product advertising; and decreased direct communication with the review team.

Crew Exploration Vehicle Launch Abort Controller Performance Analysis

NASA Technical Reports Server (NTRS)

Sparks, Dean W., Jr.; Raney, David L.

2007-01-01

This paper covers the simulation and evaluation of a controller design for the Crew Module (CM) Launch Abort System (LAS), to measure its ability to meet the abort performance requirements. The controller used in this study is a hybrid design, including features developed by the Government and the Contractor. Testing is done using two separate 6-degree-of-freedom (DOF) computer simulation implementations of the LAS/CM throughout the ascent trajectory: 1) executing a series of abort simulations along a nominal trajectory for the nominal LAS/CM system; and 2) using a series of Monte Carlo runs with perturbed initial flight conditions and perturbed system parameters. The performance of the controller is evaluated against a set of criteria, which is based upon the current functional requirements of the LAS. Preliminary analysis indicates that the performance of the present controller meets (with the exception of a few cases) the evaluation criteria mentioned above.

Towards an IMU Evaluation Framework for Human Body Tracking.

PubMed

Venek, Verena; Kremser, Wolfgang; Schneider, Cornelia

2018-01-01

Existing full-body tracking systems, which use Inertial Measurement Units (IMUs) as sensing unit, require expert knowledge for setup and data collection. Thus, the daily application for human body tracking is difficult. In particular, in the field of active and assisted living (AAL), tracking human movements would enable novel insights not only into the quantity but also into the quality of human movement, for example by monitoring functional training. While the current market offers a wide range of products with vastly different properties, literature lacks guidelines for choosing IMUs for body tracking applications. Therefore, this paper introduces developments towards an IMU evaluation framework for human body tracking which compares IMUs against five requirement areas that consider device features and data quality. The data quality is assessed by conducting a static and a dynamic error analysis. In a first application to four IMUs of different component consumption, the IMU evaluation framework convinced as promising tool for IMU selection.

Optimal design application on the advanced aeroelastic rotor blade

NASA Technical Reports Server (NTRS)

Wei, F. S.; Jones, R.

1985-01-01

The vibration and performance optimization procedure using regression analysis was successfully applied to an advanced aeroelastic blade design study. The major advantage of this regression technique is that multiple optimizations can be performed to evaluate the effects of various objective functions and constraint functions. The data bases obtained from the rotorcraft flight simulation program C81 and Myklestad mode shape program are analytically determined as a function of each design variable. This approach has been verified for various blade radial ballast weight locations and blade planforms. This method can also be utilized to ascertain the effect of a particular cost function which is composed of several objective functions with different weighting factors for various mission requirements without any additional effort.

The basis function approach for modeling autocorrelation in ecological data.

PubMed

Hefley, Trevor J; Broms, Kristin M; Brost, Brian M; Buderman, Frances E; Kay, Shannon L; Scharf, Henry R; Tipton, John R; Williams, Perry J; Hooten, Mevin B

2017-03-01

Analyzing ecological data often requires modeling the autocorrelation created by spatial and temporal processes. Many seemingly disparate statistical methods used to account for autocorrelation can be expressed as regression models that include basis functions. Basis functions also enable ecologists to modify a wide range of existing ecological models in order to account for autocorrelation, which can improve inference and predictive accuracy. Furthermore, understanding the properties of basis functions is essential for evaluating the fit of spatial or time-series models, detecting a hidden form of collinearity, and analyzing large data sets. We present important concepts and properties related to basis functions and illustrate several tools and techniques ecologists can use when modeling autocorrelation in ecological data. © 2016 by the Ecological Society of America.

Performance degradation of helicopter rotor in forward flight due to ice

NASA Technical Reports Server (NTRS)

Korkan, K. D.; Dadone, L.; Shaw, R. J.

1985-01-01

This study addresses the analytical assessment of the degradation in the forward flight performance of the front rotor Boeing Vertol CH47D helicopter in a rime ice natural icing encounter. The front rotor disk was divided into 24 15-deg sections and the local Mach number and angle of attack were evaluated as a function of azimuthal and radial location for a specified flight condition. Profile drag increments were then calculated as a function of azimuthal and radial position for different times of exposure to icing, and the rotor performance was re-evaluated including these drag increments. The results of the analytical prediction method, such as horsepower required to maintain a specific flight condition, as a function of icing time have been generated. The method to illustrate the value of such an approach in assessing performance changes experienced by a helicopter rotor as a result of rime ice accretion is described.

A non-planar two-loop three-point function beyond multiple polylogarithms

NASA Astrophysics Data System (ADS)

von Manteuffel, Andreas; Tancredi, Lorenzo

2017-06-01

We consider the analytic calculation of a two-loop non-planar three-point function which contributes to the two-loop amplitudes for t\\overline{t} production and γγ production in gluon fusion through a massive top-quark loop. All subtopology integrals can be written in terms of multiple polylogarithms over an irrational alphabet and we employ a new method for the integration of the differential equations which does not rely on the rationalization of the latter. The top topology integrals, instead, in spite of the absence of a massive three-particle cut, cannot be evaluated in terms of multiple polylogarithms and require the introduction of integrals over complete elliptic integrals and polylogarithms. We provide one-fold integral representations for the solutions and continue them analytically to all relevant regions of the phase space in terms of real functions, extracting all imaginary parts explicitly. The numerical evaluation of our expressions becomes straightforward in this way.

Evaluation of Verbal Behavior in Older Adults

PubMed Central

Gross, Amy C.; Fuqua, R. Wayne; Merritt, Todd A.

2013-01-01

Approximately 5% of older adults have a dementia diagnosis, and language deterioration is commonly associated with this disorder (Kempler, 2005). Several instruments have been developed to diagnose dementia and assess language capabilities of elderly adults. However, none of these instruments take a functional approach to language assessment as described by Skinner (1957). The purpose of this study was to develop and evaluate a function-based assessment for language deficits of older adults. Thirty-one participants were categorized into a control group (n  =  15) and a dementia group (n  =  16) based on their score on the Dementia Rating Scale-2. Individuals with dementia performed significantly worse on the tact assessment than those without dementia. Participants from both groups performed better on measures of tacts than intraverbals or mands, even though topographically identical responses were required in these assessments. The data provide support for Skinner's conceptualization of functionally independent verbal operants. PMID:23814369

Evaluation of User Interface and Workflow Design of a Bedside Nursing Clinical Decision Support System

PubMed Central

Yuan, Michael Juntao; Finley, George Mike; Mills, Christy; Johnson, Ron Kim

2013-01-01

Background Clinical decision support systems (CDSS) are important tools to improve health care outcomes and reduce preventable medical adverse events. However, the effectiveness and success of CDSS depend on their implementation context and usability in complex health care settings. As a result, usability design and validation, especially in real world clinical settings, are crucial aspects of successful CDSS implementations. Objective Our objective was to develop a novel CDSS to help frontline nurses better manage critical symptom changes in hospitalized patients, hence reducing preventable failure to rescue cases. A robust user interface and implementation strategy that fit into existing workflows was key for the success of the CDSS. Methods Guided by a formal usability evaluation framework, UFuRT (user, function, representation, and task analysis), we developed a high-level specification of the product that captures key usability requirements and is flexible to implement. We interviewed users of the proposed CDSS to identify requirements, listed functions, and operations the system must perform. We then designed visual and workflow representations of the product to perform the operations. The user interface and workflow design were evaluated via heuristic and end user performance evaluation. The heuristic evaluation was done after the first prototype, and its results were incorporated into the product before the end user evaluation was conducted. First, we recruited 4 evaluators with strong domain expertise to study the initial prototype. Heuristic violations were coded and rated for severity. Second, after development of the system, we assembled a panel of nurses, consisting of 3 licensed vocational nurses and 7 registered nurses, to evaluate the user interface and workflow via simulated use cases. We recorded whether each session was successfully completed and its completion time. Each nurse was asked to use the National Aeronautics and Space Administration (NASA) Task Load Index to self-evaluate the amount of cognitive and physical burden associated with using the device. Results A total of 83 heuristic violations were identified in the studies. The distribution of the heuristic violations and their average severity are reported. The nurse evaluators successfully completed all 30 sessions of the performance evaluations. All nurses were able to use the device after a single training session. On average, the nurses took 111 seconds (SD 30 seconds) to complete the simulated task. The NASA Task Load Index results indicated that the work overhead on the nurses was low. In fact, most of the burden measures were consistent with zero. The only potentially significant burden was temporal demand, which was consistent with the primary use case of the tool. Conclusions The evaluation has shown that our design was functional and met the requirements demanded by the nurses’ tight schedules and heavy workloads. The user interface embedded in the tool provided compelling utility to the nurse with minimal distraction. PMID:23612350

Managing depression-related occupational disability: a pragmatic approach.

PubMed

Bilsker, Dan; Wiseman, Stephen; Gilbert, Merv

2006-02-01

To identify the crucial issues that arise for psychiatrists and other physicians when dealing with occupational disability in their patients with depression and to suggest practical strategies for responding more effectively to the challenges of this aspect of patient functioning. We identify fundamental concepts in the occupational disability domain and draw crucial distinctions. The wider context for occupational disability is articulated, involving the workplace environment and the disability insurance industry. Research with direct relevance to clinical decision making in this area is highlighted. We make pragmatic suggestions for effective management of occupational disability in patients with depression. To successfully manage issues of occupational disability, psychiatrists and other physicians must understand the distinction between impairment and disability. To make this decision fairly and accurately, the adjudicator requires particular types of information from the physician, with requirements varying across short-term or long-term disability claims; failing to provide relevant information may cause substantial stress or financial harm to the patient. Balanced and collaborative decision making regarding whether and for how long to take work absence will greatly help to maintain occupational function in the long-term. Realistic expectations and support of the patient's sense of personal competence foster recovery of occupational function. Management of depression-related disability is challenging. Thoughtful evaluation of the patient's functional status, careful response to the requirements of disability determination, and a focus on functional recovery yield substantial benefits.

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation, volume 2, part 1. Appendix A: Software documentation

NASA Technical Reports Server (NTRS)

Lowrie, J. W.; Fermelia, A. J.; Haley, D. C.; Gremban, K. D.; Vanbaalen, J.; Walsh, R. W.

1982-01-01

Documentation of the preliminary software developed as a framework for a generalized integrated robotic system simulation is presented. The program structure is composed of three major functions controlled by a program executive. The three major functions are: system definition, analysis tools, and post processing. The system definition function handles user input of system parameters and definition of the manipulator configuration. The analysis tools function handles the computational requirements of the program. The post processing function allows for more detailed study of the results of analysis tool function executions. Also documented is the manipulator joint model software to be used as the basis of the manipulator simulation which will be part of the analysis tools capability.

[Adrenal incidentaloma: a clinical problem related to imaging].

PubMed

de Bruijne, E L E; Burgmans, J P J; Krestin, G P; Pols, H A P; van den Meiracker, A H; de Herder, W W

2005-08-13

Two female patients, 68 and 67 years of age, were referred for right abdominal pain and pyelonephritis, respectively. During the diagnostic work-up, an unsuspected adrenal mass was found in both patients. Hormonal evaluation and imaging showed a benign non-hyperactive functioning adenoma in one patient and a pheochromocytoma in the other. Both patients were successfully treated with endoscopic adrenalectomy. Wider application and improvement of abdominal imaging procedures have caused an increase of incidentally detected adrenal masses, posing a common clinical problem. Typically, a diagnosis can be made on the basis of the characteristic radiological image. The exact nature of the defect is often unclear and further evaluation is required to determine functionality and possible malignancy. An algorithm is presented for the management of adrenal incidentalomas.

Reliable computation from contextual correlations

NASA Astrophysics Data System (ADS)

Oestereich, André L.; Galvão, Ernesto F.

2017-12-01

An operational approach to the study of computation based on correlations considers black boxes with one-bit inputs and outputs, controlled by a limited classical computer capable only of performing sums modulo-two. In this setting, it was shown that noncontextual correlations do not provide any extra computational power, while contextual correlations were found to be necessary for the deterministic evaluation of nonlinear Boolean functions. Here we investigate the requirements for reliable computation in this setting; that is, the evaluation of any Boolean function with success probability bounded away from 1 /2 . We show that bipartite CHSH quantum correlations suffice for reliable computation. We also prove that an arbitrarily small violation of a multipartite Greenberger-Horne-Zeilinger noncontextuality inequality also suffices for reliable computation.

Shoulder Strength Requirements for Upper Limb Functional Tasks: Do Age and Rotator Cuff Tear Status Matter?

PubMed

Santago, Anthony C; Vidt, Meghan E; Li, Xiaotong; Tuohy, Christopher J; Poehling, Gary G; Freehill, Michael T; Saul, Katherine R

2017-12-01

Understanding upper limb strength requirements for daily tasks is imperative for early detection of strength loss that may progress to disability due to age or rotator cuff tear. We quantified shoulder strength requirements for 5 upper limb tasks performed by 3 groups: uninjured young adults and older adults, and older adults with a degenerative supraspinatus tear prior to repair. Musculoskeletal models were developed for each group representing age, sex, and tear-related strength losses. Percentage of available strength used was quantified for the subset of tasks requiring the largest amount of shoulder strength. Significant differences in strength requirements existed across tasks: upward reach 105° required the largest average strength; axilla wash required the largest peak strength. However, there were limited differences across participant groups. Older adults with and without a tear used a larger percentage of their shoulder elevation (p < .001, p < .001) and external rotation (p < .001, p = .017) strength than the young adults, respectively. Presence of a tear significantly increased percentage of internal rotation strength compared to young (p < .001) and uninjured older adults (p = .008). Marked differences in strength demand across tasks indicate the need for evaluating a diversity of functional tasks to effectively detect early strength loss, which may lead to disability.

iPhone in NASA Ground Operations

NASA Technical Reports Server (NTRS)

Benedict, Ashley; Byrd, Keena; Ignacio, Lalaine; Lagu, Amit; Palmer, Ralph Curtis, III; Savoy, April; Surabattula, Deepti; Vaitkunas, Samantha

2007-01-01

A comprehensive review of the literature and historical background of NASA established a need for an easy-to-implement technological improvement to displaying procedures which is cost effective and risk reducing. Previous unsuccessful attempts have led this team to explore the practicality of using a mobile handheld device. The major products, inputs, resources, constraints, planning and effort required for consideration of this type of solution were outlined. After analyzing the physical, environmental, life-cycle, functional, and socio-technical requirements, a Functional Analysis was performed to describe the top-level, second-level, and third-level functions of the system requirements. In addition, the risk/value proposition of conversion to a new technology was considered and gave a blueprint for transitioning along with the tasks necessary to implement the device into the Vehicle Assembly Building's (VAB) current infrastructure. A Work Breakdown Structure (WBS) described the elemental work items of the implementation. Once the viability of this system was confirmed, a device was selected through use of technical design comparison methods including the Pugh Matrix and House of Quality. Comparison and evaluation of the Apple iPhone, Motorola Q, Blackberry, PC Notebook, and PDA revealed that the iPhone is the most suitable device for this task. This paper outlines the device design/ architecture, as well as some of the required infrastructure.

Measured soil water evaporation as a function of the square root of time and reference ET

USDA-ARS?s Scientific Manuscript database

Sunflower (Helianthus annuus L.) is a drought-adapted crop with a short growing season that reduces irrigation requirements and makes it ideal for regions with limited irrigation water supplies. Our objectives were a) to evaluate the yield potential of sunflower under deficit irrigation and b) det...

Effects of ionizing radiation on charge-coupled imagers

NASA Technical Reports Server (NTRS)

Killiany, J. M.; Baker, W. D.; Saks, N. S.; Barbe, D. F.

1975-01-01

The effects of ionizing radiation on three different charge coupled imagers have been investigated. Device performance was evaluated as a function of total gamma ray dose. The principal failure mechanisms have been identified for each particular device structure. The clock and bias voltages required for high total dose operation of the devices are presented.

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 3: Engineering creative/evaluation processes, phase 1, task 2

NASA Technical Reports Server (NTRS)

Garrocq, C. A.; Hosek, J. J.

1973-01-01

A series of functional flow charts are considered that were developed to properly identify and record the degree of participation of the disciplines considered in this feasibility study and the type of data required in the design process.

Five Faculty Labor Market Dilemmas Facing Community Colleges in the New Economy

ERIC Educational Resources Information Center

Mitchell, Douglas E.; Yildiz, Selin; Batie, Michael

2011-01-01

Community colleges employ more than one-third of the nation's higher education faculty. Nevertheless, the labor market through which faculty are recruited, selected, hired, evaluated and retained or replaced is one of the least understood aspects of these institutions. Functional management and effective policy both require a clear understanding…

Employability Skill Development in Work-Integrated Learning: Barriers and Best Practice

ERIC Educational Resources Information Center

Jackson, Denise

2015-01-01

Work-integrated learning (WIL) is widely considered instrumental in equipping new graduates with the required employability skills to function effectively in the work environment. Evaluation of WIL programs in enhancing skill development remains predominantly outcomes-focused with little attention to the process of what, how and from whom students…

Identification and verification of hybridoma-derived monoclonal antibody variable region sequences using recombinant DNA technology and mass spectrometry

USDA-ARS?s Scientific Manuscript database

Antibody engineering requires the identification of antigen binding domains or variable regions (VR) unique to each antibody. It is the VR that define the unique antigen binding properties and proper sequence identification is essential for functional evaluation and performance of recombinant antibo...

On Partial Fraction Expansion with Multiple Poles. Classroom Notes

ERIC Educational Resources Information Center

Hou, Shui-Hung; Hou, Edwin Sui-Hoi

2004-01-01

A simple and novel method for evaluating the partial fraction expansion of proper rational functions is presented. The technique involves simultaneous determination of the partial fraction coefficients associated with each of the multiple poles in the expansion in turn. Only synthetic division is required, which makes the process very suitable for…

On board processor development for NASA's spaceborne imaging radar with system-on-chip technology

NASA Technical Reports Server (NTRS)

Fang, Wai-Chi

2004-01-01

This paper reports a preliminary study result of an on-board spaceborne SAR processor. It consists of a processing requirement analysis, functional specifications, and implementation with system-on-chip technology. Finally, a minimum version of this on-board processor designed for performance evaluation and for partial demonstration is illustrated.

Evaluation of Short-Term Bioassays to Predict Functional Impairment. Selected Short-Term Renal Toxicity Tests.

DTIC Science & Technology

1980-10-01

reported using the method of Gentzkow (1942), which involves conversion of urea to ammonia with urease and measurement of the ammonia by...Nesslerization. Methods employing urease are not well suited for automated analysis since an incubation time of about 20 minutes is required for the conversion of

Development of Entry-Level Competence Tests: A Strategy for Evaluation of Vocational Education Training Systems

ERIC Educational Resources Information Center

Schutte, Marc; Spottl, Georg

2011-01-01

Developing countries such as Malaysia and Oman have recently established occupational standards based on core work processes (functional clusters of work objects, activities and performance requirements), to which competencies (performance determinants) can be linked. While the development of work-process-based occupational standards is supposed…

Evaluating a Professional Development Framework to Empower Chemistry Teachers to Design Context-Based Education

ERIC Educational Resources Information Center

Stolk, Machiel Johan; Bulte, Astrid; De Jong, Onno; Pilot, Albert

2012-01-01

Even experienced chemistry teachers require professional development when they are encouraged to become actively engaged in the design of new context-based education. This study briefly describes the development of a framework consisting of goals, learning phases, strategies and instructional functions, and how the framework was translated into a…

Ovarian transposition in young women and fertility sparing.

PubMed

Mossa, B; Schimberni, M; Di Benedetto, L; Mossa, S

2015-09-01

Ovarian transposition is a highly effective surgical procedure used to preserve ovarian function in premenopausal patients with cancers requiring postoperative or primary pelvic radiotherapy. Pelvic irradiation determines severe damage of ovarian DNA and iatrogenic ovarian failure with premature menopause, necessity of long-term hormone replacement therapy and infertility. We conducted an extensive research of the literature in Medline between January 2000 and April 2015 using the key-words "ovarian transposition radiotherapy", "radiotherapy gonadal function", radiotherapy fertility sparing". The population included young women with normal ovarian function affected by cancers that required pelvic radiotherapy. We have examined 32 articles reporting on 1189 women undergoing ovarian transposition. Median age was 32.5 years, follow up was median 48 months. The procedure has been performed in patients less than 40 years of age. Surgery has been achieved by laparotomy or laparoscoy. We have analyzed effects of radiotherapy on ovarian function. The proportion of women treated by ovarian transposition preserved ovarian function was 70%. About 86% of patients did not develop ovarian cysts and in 98-99% of cases did not occur any metastatic disease. Ovarian transposition is associated with significant preservation of ovarian function and a low frequency of complications as cysts and metastasis. In 31% of cases the procedure can fail. Further studies are needed to evaluate the efficacy of ovarian transposition and the follow up. Ovarian transposition should be discussed at the time of cancer diagnosis in every premenopausal woman requiring pelvic radiotherapy.

The Expert Infantryman Squad and Platoon Evaluation (EISPE) I Concept: Evaluations and Observations

DTIC Science & Technology

1977-12-01

specific perforanc•a test imetditelv following the roa’ &.:-rch requires the Infantryman to show he r n still function AccA .-’a\\;ifter the stress of...weighed against thn cost of devoting an hour or two of valuable testing time to this activity. Similarly, it is debatable whether tre coordinated...the objective effective? (9) Was withdrawal free the objective rapid and organized? (10) Was everyone accounted for at the oojective raily point? (11

The development of a test methodology for the evaluation of EVA gloves

NASA Technical Reports Server (NTRS)

O'Hara, John M.; Cleland, John; Winfield, Dan

1988-01-01

This paper describes the development of a standardized set of tests designed to assess EVA-gloved hand capabilities in six measurement domains: range of motion, strength, tactile perception, dexterity, fatigue, and comfort. Based upon an assessment of general human-hand functioning and EVA task requirements, several tests within each measurement domain were developed to provide a comprehensive evaluation. All tests were designed to be conducted in a glove box with the bare hand as a baseline and the EVA glove at operating pressure.

Desirability function combining metabolic stability and functionality of peptides.

PubMed

Van Dorpe, Sylvia; Adriaens, Antita; Vermeire, Simon; Polis, Ingeborgh; Peremans, Kathelijne; Spiegeleer, Bart De

2011-05-01

The evaluation of peptides as potential therapeutic or diagnostic agents requires the consideration of several criteria that are targeted around two axes: functionality and metabolic stability. Most often, a compromise has to be made between these mutually opposing characteristics. In this study, Derringer's desirability function, a multi-criteria decision-making method, was applied to determine the best peptide for opioid studies in a single figure-of-merit. The penetration of the blood-brain barrier (BBB) determines the biological functionality of neuropeptides in the brain target tissue, and consists of an influx and an efflux component. The metabolic stability in the two concerned tissues, i.e. plasma and brain, are taken into consideration as well. The overall selection of the peptide drug candidate having the highest BBB-drugability is difficult due to these conflicting responses as well as the different scalings of the four biological parameters under consideration. The highest desirability, representing the best BBB-drugability, was observed for dermorphin. This peptide is thus the most promising drug candidate from the set of eight opioid peptides that were investigated. The least desirable candidate, with the worst BBB influx and/or metabolic stability, was found to be CTAP. Validation of the desirability function by in vivo medical imaging showed that dermorphin and DAMGO penetrate the BBB, whereas EM-1 and TAPP did not. These results are thus consistent with those obtained with the desirability evaluation. To conclude, the multi-criteria decision method was proven to be useful in biomedical research, where a selection of the best candidate based on opposing characteristics is often required. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.

Documentation of Functional Medication Management in Older Adults: A Retrospective Chart Review in Acute Care Hospitalization.

PubMed

Bolina, Monika; Jones, C Allyson; Koshman, Sheri; Heintz, Erin; Sadowski, Cheryl A

2016-12-01

Functional skills can affect the ability of older adults to appropriately manage their medication regimens. Research evaluating a patient's functional ability or the assessment of medication management is limited. Our objective was to describe the documented components of functional medication management (FMM) in adults aged ≥65 years during an acute hospital stay. The secondary objective was to describe the characteristics of the healthcare providers (HCP) who document FMM. This study was a retrospective chart review of a sample of patients aged ≥65 years admitted to medical units in a tertiary hospital from January 2013 to October 2014. FMM was defined as the steps required to take medications-including ordering, picking up, organizing, preparing, administering, and monitoring medications-and the functional abilities necessary to perform these tasks. The mean (standard deviation [SD]) age of patients was 78.9 (8.4) years; 72 (52 %) were female. Of the 190 charts screened, 140 were eligible for inclusion. The mean (SD) number of documented scheduled oral medications was eight (3.1) per patient, and 108 (77.1 %) charts contained documented FMM-related information. Commonly documented FMM components included whether the patient could administer medications independently (73 [52 %]) or schedule medication (46 [33 %]). These activities were most frequently documented by physicians (124 [39 %]) and occupational therapists (108 [34 %]). FMM assessments for older adult inpatients with multiple comorbidities and complex medication regimens were not documented comprehensively or frequently. Given the complexity of medication regimens and the functional skills required to manage medications at home, failing to document these assessments when evaluating patients in hospital reflects a lost opportunity.

Turbopump Performance Improved by Evolutionary Algorithms

NASA Technical Reports Server (NTRS)

Oyama, Akira; Liou, Meng-Sing

2002-01-01

The development of design optimization technology for turbomachinery has been initiated using the multiobjective evolutionary algorithm under NASA's Intelligent Synthesis Environment and Revolutionary Aeropropulsion Concepts programs. As an alternative to the traditional gradient-based methods, evolutionary algorithms (EA's) are emergent design-optimization algorithms modeled after the mechanisms found in natural evolution. EA's search from multiple points, instead of moving from a single point. In addition, they require no derivatives or gradients of the objective function, leading to robustness and simplicity in coupling any evaluation codes. Parallel efficiency also becomes very high by using a simple master-slave concept for function evaluations, since such evaluations often consume the most CPU time, such as computational fluid dynamics. Application of EA's to multiobjective design problems is also straightforward because EA's maintain a population of design candidates in parallel. Because of these advantages, EA's are a unique and attractive approach to real-world design optimization problems.

Investigation into Cloud Computing for More Robust Automated Bulk Image Geoprocessing

NASA Technical Reports Server (NTRS)

Brown, Richard B.; Smoot, James C.; Underwood, Lauren; Armstrong, C. Duane

2012-01-01

Geospatial resource assessments frequently require timely geospatial data processing that involves large multivariate remote sensing data sets. In particular, for disasters, response requires rapid access to large data volumes, substantial storage space and high performance processing capability. The processing and distribution of this data into usable information products requires a processing pipeline that can efficiently manage the required storage, computing utilities, and data handling requirements. In recent years, with the availability of cloud computing technology, cloud processing platforms have made available a powerful new computing infrastructure resource that can meet this need. To assess the utility of this resource, this project investigates cloud computing platforms for bulk, automated geoprocessing capabilities with respect to data handling and application development requirements. This presentation is of work being conducted by Applied Sciences Program Office at NASA-Stennis Space Center. A prototypical set of image manipulation and transformation processes that incorporate sample Unmanned Airborne System data were developed to create value-added products and tested for implementation on the "cloud". This project outlines the steps involved in creating and testing of open source software developed process code on a local prototype platform, and then transitioning this code with associated environment requirements into an analogous, but memory and processor enhanced cloud platform. A data processing cloud was used to store both standard digital camera panchromatic and multi-band image data, which were subsequently subjected to standard image processing functions such as NDVI (Normalized Difference Vegetation Index), NDMI (Normalized Difference Moisture Index), band stacking, reprojection, and other similar type data processes. Cloud infrastructure service providers were evaluated by taking these locally tested processing functions, and then applying them to a given cloud-enabled infrastructure to assesses and compare environment setup options and enabled technologies. This project reviews findings that were observed when cloud platforms were evaluated for bulk geoprocessing capabilities based on data handling and application development requirements.

Cognitive Function Among Obstructive Sleep Apnea Patients in North East Malaysia.

PubMed

Yusop, Che Yusfarina Che; Mohamad, Irfan; Mohammad, Wan Mohd Zahiruddin Wan; Abdullah, Baharudin

2017-01-01

Obstructive sleep apnea patients may develop deficits in the cognitive domains of attention, concentration, executive function, verbal and visuospatial memory, constructional abilities, and psychomotor functioning. As cognitive performance will improve with the treatment, early screening for cognitive dysfunction should be done to prevent further deterioration. We aim to evaluate the cognitive function of obstructive sleep apnea patients by using the 'Mini Mental State Examination'. This was a cross sectional study to evaluate the cognitive function of moderate and severe obstructive sleep apnea patients with age ranged from 18 to 60 old who attended our sleep clinic. These patients were confirmed to have moderate and severe obstructive sleep apnea by Type 1 polysomnography (attended full overnight study). The age, gender and ethnicity were noted and other relevant data such as weight, height, body mass index and apnea and hypopnoea index were recorded accordingly. The cognitive function was evaluated using validated Malay version of Mini Mental State Examination which measured 5 areas of cognitive functions comprising orientation, registration, attention and calculation, word recall and language abilities, and visuospatial. A total of 38 patients participated in this study. All 19 patients of moderate group and 14 patients of severe group had normal cognitive function while only 5 patients in severe group had mild cognitive function impairment. There was a statistically significant difference between the moderate group and severe group on cognitive performance (p value = 0.042). Severe obstructive sleep apnea patients may have impaired cognitive function. Mini Mental State Examination is useful in the screening of cognitive function of obstructive sleep apnea patients but in normal score, more sophisticated test batteries are required as it is unable to identify in 'very minimal' or 'extremely severe' cognitive dysfunction. Copyright © 2017 National Medical Association. Published by Elsevier Inc. All rights reserved.

Ophthalmic Evaluation in Beta-Thalassemia.

PubMed

Merchant, Rashid H; Punde, Hrishikesh; Thacker, Neepa; Bhatt, Deepak

2017-07-01

To determine the association of ocular manifestations in beta-thalassemia with the patient's age, blood transfusion requirements, average serum ferritin and dose and duration of iron chelation therapy. Sixty multi-transfused beta thalassemia patients of 12 to 18 y of age on chelation therapy were included in this cross-sectional analysis. Structural and functional evaluation of the retina was done using Optical coherence tomography (OCT) and Electroretinography (ERG), including flash ERG and Pattern ERG (PERG). Routine ophthalmic examination and B scan of the eye was also done. Flash ERG a-waves and b-waves were recorded, however only a-wave amplitude was evaluated. Pattern ERG n35, n95 and p50 waves were recorded and p50 wave amplitude was evaluated. The a-wave on flash and p50 on pattern waves represent retinal photoreceptor epithelium (RPE) photoreceptor response, which is mainly affected in beta-thalassemia. Ocular changes were detected in 38.3% and a significant correlation was noted with increase in age (p = 0.045) but not with serum ferritin, transfusion requirements or chelation therapy. Refractive errors were found in 14 cases (23%), such as myopia with astigmatism in 13 (21.7%) and only myopia in 6 subjects (10%). OCT abnormality was noted in 1 patient (1.7%) who had thinning of central retina; right eye 132 μm and left eye 146 μm (n > 200 μm). Abnormalities were noted in a-wave amplitude on flash ERG in 20% of cases, while reduced p50 amplitude on PERG was noted in 15%. A significant correlation was noted between ocular findings and increase in age, but not with serum ferritin, transfusion requirements or chelation therapy. ERG appears to be a promising tool for screening patients with beta-thalassemia and can serve as a follow-up test for evaluating retinal function.

GPU-based Green's function simulations of shear waves generated by an applied acoustic radiation force in elastic and viscoelastic models.

PubMed

Yang, Yiqun; Urban, Matthew W; McGough, Robert J

2018-05-15

Shear wave calculations induced by an acoustic radiation force are very time-consuming on desktop computers, and high-performance graphics processing units (GPUs) achieve dramatic reductions in the computation time for these simulations. The acoustic radiation force is calculated using the fast near field method and the angular spectrum approach, and then the shear waves are calculated in parallel with Green's functions on a GPU. This combination enables rapid evaluation of shear waves for push beams with different spatial samplings and for apertures with different f/#. Relative to shear wave simulations that evaluate the same algorithm on an Intel i7 desktop computer, a high performance nVidia GPU reduces the time required for these calculations by a factor of 45 and 700 when applied to elastic and viscoelastic shear wave simulation models, respectively. These GPU-accelerated simulations also compared to measurements in different viscoelastic phantoms, and the results are similar. For parametric evaluations and for comparisons with measured shear wave data, shear wave simulations with the Green's function approach are ideally suited for high-performance GPUs.

Contingency Management Requirements Document: Preliminary Version. Revision F

NASA Technical Reports Server (NTRS)

2005-01-01

This is the High Altitude, Long Endurance (HALE) Remotely Operated Aircraft (ROA) Contingency Management (CM) Functional Requirements document. This document applies to HALE ROA operating within the National Airspace System (NAS) limited at this time to enroute operations above 43,000 feet (defined as Step 1 of the Access 5 project, sponsored by the National Aeronautics and Space Administration). A contingency is an unforeseen event requiring a response. The unforeseen event may be an emergency, an incident, a deviation, or an observation. Contingency Management (CM) is the process of evaluating the event, deciding on the proper course of action (a plan), and successfully executing the plan.

Mars rover 1988 concepts

NASA Technical Reports Server (NTRS)

Pivirotto, Donna Shirley; Penn, Thomas J.; Dias, William C.

1989-01-01

Results of FY88 studies of a sample-collecting Mars rover are presented. A variety of rover concepts are discussed which include different technical approaches to rover functions. The performance of rovers with different levels of automation is described and compared to the science requirement for 20 to 40 km to be traversed on the Martian surface and for 100 rock and soil samples to be collected. The analysis shows that a considerable amount of automation in roving and sampling is required to meet this requirement. Additional performance evaluation shows that advanced RTG's producing 500 W and 350 WHr of battery storage are needed to supply the rover.

Low-rank canonical-tensor decomposition of potential energy surfaces: application to grid-based diagrammatic vibrational Green's function theory

DOE PAGES

Rai, Prashant; Sargsyan, Khachik; Najm, Habib; ...

2017-03-07

Here, a new method is proposed for a fast evaluation of high-dimensional integrals of potential energy surfaces (PES) that arise in many areas of quantum dynamics. It decomposes a PES into a canonical low-rank tensor format, reducing its integral into a relatively short sum of products of low-dimensional integrals. The decomposition is achieved by the alternating least squares (ALS) algorithm, requiring only a small number of single-point energy evaluations. Therefore, it eradicates a force-constant evaluation as the hotspot of many quantum dynamics simulations and also possibly lifts the curse of dimensionality. This general method is applied to the anharmonic vibrationalmore » zero-point and transition energy calculations of molecules using the second-order diagrammatic vibrational many-body Green's function (XVH2) theory with a harmonic-approximation reference. In this application, high dimensional PES and Green's functions are both subjected to a low-rank decomposition. Evaluating the molecular integrals over a low-rank PES and Green's functions as sums of low-dimensional integrals using the Gauss–Hermite quadrature, this canonical-tensor-decomposition-based XVH2 (CT-XVH2) achieves an accuracy of 0.1 cm -1 or higher and nearly an order of magnitude speedup as compared with the original algorithm using force constants for water and formaldehyde.« less

Low-rank canonical-tensor decomposition of potential energy surfaces: application to grid-based diagrammatic vibrational Green's function theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rai, Prashant; Sargsyan, Khachik; Najm, Habib

Here, a new method is proposed for a fast evaluation of high-dimensional integrals of potential energy surfaces (PES) that arise in many areas of quantum dynamics. It decomposes a PES into a canonical low-rank tensor format, reducing its integral into a relatively short sum of products of low-dimensional integrals. The decomposition is achieved by the alternating least squares (ALS) algorithm, requiring only a small number of single-point energy evaluations. Therefore, it eradicates a force-constant evaluation as the hotspot of many quantum dynamics simulations and also possibly lifts the curse of dimensionality. This general method is applied to the anharmonic vibrationalmore » zero-point and transition energy calculations of molecules using the second-order diagrammatic vibrational many-body Green's function (XVH2) theory with a harmonic-approximation reference. In this application, high dimensional PES and Green's functions are both subjected to a low-rank decomposition. Evaluating the molecular integrals over a low-rank PES and Green's functions as sums of low-dimensional integrals using the Gauss–Hermite quadrature, this canonical-tensor-decomposition-based XVH2 (CT-XVH2) achieves an accuracy of 0.1 cm -1 or higher and nearly an order of magnitude speedup as compared with the original algorithm using force constants for water and formaldehyde.« less

Cognitive performance in women with fibromyalgia: A case-control study.

PubMed

Pérez de Heredia-Torres, Marta; Huertas-Hoyas, Elisabet; Máximo-Bocanegra, Nuria; Palacios-Ceña, Domingo; Fernández-De-Las-Peñas, César

2016-10-01

This study aimed to evaluate the differences in cognitive skills between women with fibromyalgia and healthy women, and the correlations between functional independence and cognitive limitations. A cross-sectional study was performed. Twenty women with fibromyalgia and 20 matched controls participated. Outcomes included the Numerical Pain Rating Scale, the Functional Independence Measure, the Fibromyalgia Impact Questionnaire and Gradior © software. The Student's t-test and the Spearman's rho test were applied to the data. Women affected required a greater mean time (P < 0.020) and maximum time (P < 0.015) during the attention test than the healthy controls. In the memory test they displayed greater execution errors (P < 0.001), minimal time (P < 0.001) and mean time (P < 0.001) whereas, in the perception tests, they displayed a greater mean time (P < 0.009) and maximum time (P < 0.048). Correlations were found between the domains of the functional independence measure and the cognitive abilities assessed. Women with fibromyalgia exhibited a decreased cognitive ability compared to healthy controls, which negatively affected the performance of daily activities, such as upper limb dressing, feeding and personal hygiene. Patients required more time to perform activities requiring both attention and perception, decreasing their functional independence. Also, they displayed greater errors when performing activities requiring the use of memory. Occupational therapists treating women with fibromyalgia should consider the negative impact of possible cognitive deficits on the performance of daily activities and offer targeted support strategies. © 2016 Occupational Therapy Australia.

Altair Lander Life Support: Requirement Analysis Cycles 1 and 2

NASA Technical Reports Server (NTRS)

Anderson, Molly; Curley, Su; Rotter, Henry; Yagoda, Evan

2009-01-01

Life support systems are a critical part of human exploration beyond low earth orbit. NASA s Altair Lunar Lander has unique missions to perform and will need a unique life support system to complete them. Initial work demonstrated a feasible minimally-functional Lander design. This work was completed in Design Analysis Cycles (DAC) 1, 2, and 3 were reported in a previous paper. On October 21, 2008, the Altair project completed the Mission Concept Review (MCR), moving the project into Phase A. In Phase A activities, the project is preparing for the System Requirements Review (SRR). Altair has conducted two Requirements Analysis Cycles (RACs) to begin this work. During this time, the life support team must examine the Altair mission concepts, Constellation Program level requirements, and interfaces with other vehicles and spacesuits to derive the right set of requirements for the new vehicle. The minimum functionality design meets some of these requirements already and can be easily adapted to meet others. But Altair must identify which will be more costly in mass, power, or other resources to meet. These especially costly requirements must be analyzed carefully to be sure they are truly necessary, and are the best way of explaining and meeting the true need. If they are necessary and clear, they become important mass threats to track at the vehicle level. If they are not clear or do not seem necessary to all stakeholders, Altair must work to redefine them or push back on the requirements writers. Additionally, the life support team is evaluating new technologies to see if they are more effective than the existing baseline design at performing necessary functions in Altair s life support system.

Altair Lander Life Support: Requirements Analysis Cycles 1 and 2

NASA Technical Reports Server (NTRS)

Anderson, Molly; Curley, Su; Rotter, Henry; Yagoda, Evan

2010-01-01

Life support systems are a critical part of human exploration beyond low earth orbit. NASA's Altair Lunar Lander has unique missions to perform and will need a unique life support system to complete them. Initial work demonstrated a feasible minimally -functional Lander design. This work was completed in Design Analysis Cycles (DAC) 1, 2, and 3 were reported in a previous paper'. On October 21, 2008, the Altair project completed the Mission Concept Review (MCR), moving the project into Phase A. In Phase A activities, the project is preparing for the System Requirements Review (SRR). Altair has conducted two Requirements Analysis Cycles (RACs) to begin this work. During this time, the life support team must examine the Altair mission concepts, Constellation Program level requirements, and interfaces with other vehicles and spacesuits to derive the right set of requirements for the new vehicle. The minimum functionality design meets some of these requirements already and can be easily adapted to meet others. But Altair must identify which will be more costly in mass, power, or other resources to meet. These especially costly requirements must be analyzed carefully to be sure they are truly necessary, and are the best way of explaining and meeting the true need. If they are necessary and clear, they become important mass threats to track at the vehicle level. If they are not clear or do not seem necessary to all stakeholders, Altair must work to redefine them or push back on the requirements writers. Additionally, the life support team is evaluating new technologies to see if they are more effective than the existing baseline design at performing necessary functions in Altair's life support system.

A Framework for Evaluating the Software Product Quality of Pregnancy Monitoring Mobile Personal Health Records.

PubMed

Idri, Ali; Bachiri, Mariam; Fernández-Alemán, José Luis

2016-03-01

Stakeholders' needs and expectations are identified by means of software quality requirements, which have an impact on software product quality. In this paper, we present a set of requirements for mobile personal health records (mPHRs) for pregnancy monitoring, which have been extracted from literature and existing mobile apps on the market. We also use the ISO/IEC 25030 standard to suggest the requirements that should be considered during the quality evaluation of these mPHRs. We then go on to design a checklist in which we contrast the mPHRs for pregnancy monitoring requirements with software product quality characteristics and sub-characteristics in order to calculate the impact of these requirements on software product quality, using the ISO/IEC 25010 software product quality standard. The results obtained show that the requirements related to the user's actions and the app's features have the most impact on the external sub-characteristics of the software product quality model. The only sub-characteristic affected by all the requirements is Appropriateness of Functional suitability. The characteristic Operability is affected by 95% of the requirements while the lowest degrees of impact were identified for Compatibility (15%) and Transferability (6%). Lastly, the degrees of the impact of the mPHRs for pregnancy monitoring requirements are discussed in order to provide appropriate recommendations for the developers and stakeholders of mPHRs for pregnancy monitoring.

Thumb in the plane of the hand: characterization and results of surgical treatment.

PubMed

Langer, Jakub S; Manske, Paul R; Steffen, Jennifer A; Hu, Calvin; Goldfarb, Charles

2009-12-01

The purpose of this retrospective investigation is to characterize a congenital deformity, the thumb in the plane of the hand (TPH), and to evaluate the results of abduction-rotation osteotomy of the thumb metacarpal with thumb web space deepening (WSD). We performed a comprehensive analysis of the medical records, hand therapy notes, and radiographs to evaluate clinical features of the TPH deformity. We evaluated clinical and radiographic outcomes and incidence of deformity recurrence after abduction-rotation osteotomy and thumb WSD. Thirteen patients (7 girls and 6 boys) with 14 affected hands treated with an abduction-rotation osteotomy of the thumb metacarpal and formation of a deepened thumb-index web space met inclusion criteria. All TPH deformities were associated with other congenital conditions, including symbrachydactyly, syndactyly, central deficiency, and ulnar deficiency. During the course of treatment, patients had a mean of 4 surgeries per hand; 3 hands required osteotomy revision with or without revision WSD, and 6 additional hands required revision of thumb WSD alone. None of the affected hands were capable of thumb opposition to any finger before surgery, whereas after surgery, all 14 hands could actively perform key pinch, and 9 of the 14 hands could actively oppose the thumb to at least 1 finger. The TPH deformity occurs in association with other congenital abnormalities of the hand. An abduction-rotation osteotomy of the thumb metacarpal with thumb WSD can restore thumb opposition and improve function; nonetheless, multiple surgical procedures are often required, and thumb function may remain limited. Therapeutic IV.

Periocular Reconstruction in Patients with Facial Paralysis.

PubMed

Joseph, Shannon S; Joseph, Andrew W; Douglas, Raymond S; Massry, Guy G

2016-04-01

Facial paralysis can result in serious ocular consequences. All patients with orbicularis oculi weakness in the setting of facial nerve injury should undergo a thorough ophthalmologic evaluation. The main goal of management in these patients is to protect the ocular surface and preserve visual function. Patients with expected recovery of facial nerve function may only require temporary and conservative measures to protect the ocular surface. Patients with prolonged or unlikely recovery of facial nerve function benefit from surgical rehabilitation of the periorbital complex. Current reconstructive procedures are most commonly intended to improve coverage of the eye but cannot restore blink. Copyright © 2016 Elsevier Inc. All rights reserved.

Large scale GW calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Govoni, Marco; Galli, Giulia

We present GW calculations of molecules, ordered and disordered solids and interfaces, which employ an efficient contour deformation technique for frequency integration and do not require the explicit evaluation of virtual electronic states nor the inversion of dielectric matrices. We also present a parallel implementation of the algorithm, which takes advantage of separable expressions of both the single particle Green’s function and the screened Coulomb interaction. The method can be used starting from density functional theory calculations performed with semilocal or hybrid functionals. The newly developed technique was applied to GW calculations of systems of unprecedented size, including water/semiconductor interfacesmore » with thousands of electrons.« less

Large Scale GW Calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Govoni, Marco; Galli, Giulia

We present GW calculations of molecules, ordered and disordered solids and interfaces, which employ an efficient contour deformation technique for frequency integration and do not require the explicit evaluation of virtual electronic states nor the inversion of dielectric matrices. We also present a parallel implementation of the algorithm which takes advantage of separable expressions of both the single particle Green's function and the screened Coulomb interaction. The method can be used starting from density functional theory calculations performed with semilocal or hybrid functionals. We applied the newly developed technique to GW calculations of systems of unprecedented size, including water/semiconductor interfacesmore » with thousands of electrons.« less

Large scale GW calculations

DOE PAGES

Govoni, Marco; Galli, Giulia

2015-01-12

We present GW calculations of molecules, ordered and disordered solids and interfaces, which employ an efficient contour deformation technique for frequency integration and do not require the explicit evaluation of virtual electronic states nor the inversion of dielectric matrices. We also present a parallel implementation of the algorithm, which takes advantage of separable expressions of both the single particle Green’s function and the screened Coulomb interaction. The method can be used starting from density functional theory calculations performed with semilocal or hybrid functionals. The newly developed technique was applied to GW calculations of systems of unprecedented size, including water/semiconductor interfacesmore » with thousands of electrons.« less

Evaluation methodologies for an advanced information processing system

NASA Technical Reports Server (NTRS)

Schabowsky, R. S., Jr.; Gai, E.; Walker, B. K.; Lala, J. H.; Motyka, P.

1984-01-01

The system concept and requirements for an Advanced Information Processing System (AIPS) are briefly described, but the emphasis of this paper is on the evaluation methodologies being developed and utilized in the AIPS program. The evaluation tasks include hardware reliability, maintainability and availability, software reliability, performance, and performability. Hardware RMA and software reliability are addressed with Markov modeling techniques. The performance analysis for AIPS is based on queueing theory. Performability is a measure of merit which combines system reliability and performance measures. The probability laws of the performance measures are obtained from the Markov reliability models. Scalar functions of this law such as the mean and variance provide measures of merit in the AIPS performability evaluations.

[Indicators of communication and degree of professional integration in healthcare].

PubMed

Mola, Ernesto; Maggio, Anna; Vantaggiato, Lucia

2009-01-01

According to the chronic care model, improving the management of chronic illness requires efficient communication between health care professionals and the creation of a web of integrated healthcare The aim of this study was to identify an efficient methodology for evaluating the degree of professional integration through indicators related to communication between healthcare professionals. The following types of indicators were identified:-structure indicators to evaluate the presence of prerequisites necessary for implementing the procedures -functional indicators to quantitatively evaluate the use of communications instruments-performance indicators Defining specific indicators may be an appropriate methodology for evaluating the degree of integration and communication between health professionals, available for a bargaining system of incentives.

Health Monitoring and Evaluation of Long-Span Bridges Based on Sensing and Data Analysis: A Survey

PubMed Central

Zhou, Jianting; Li, Xiaogang; Xia, Runchuan; Yang, Jun; Zhang, Hong

2017-01-01

Aimed at the health monitoring and evaluation of bridges based on sensing technology, the monitoring contents of different structural types of long-span bridges were defined. Then, the definition, classification, selection principle, and installation requirements of the sensors were summarized. The concept was proposed that new adaptable long-life sensors could be developed by new theories and new effects. The principle and methods to select controlled sections and optimize the layout design of measuring points were illustrated. The functional requirements were elaborated on about the acquisition, transmission, processing, and management of sensing information. Some advanced concepts about the method of bridge safety evaluation were demonstrated and technology bottlenecks in the current safety evaluation were also put forward. Ultimately, combined with engineering practices, an application was carried out. The results showed that new, intelligent, and reliable sensor technology would be one of the main future development directions in the long-span bridge health monitoring and evaluation field. Also, it was imperative to optimize the design of the health monitoring system and realize its standardization. Moreover, it is a heavy responsibility to explore new thoughts and new concepts regarding practical bridge safety and evaluation technology. PMID:28300785

Imaging regional renal function parameters using radionuclide tracers

NASA Astrophysics Data System (ADS)

Qiao, Yi

A compartmental model is given for evaluating kidney function accurately and noninvasively. This model is cast into a parallel multi-compartment structure and each pixel region (picture element) of kidneys is considered as a single kidney compartment. The loss of radionuclide tracers from the blood to the kidney and from the kidney to the bladder are modelled in great detail. Both the uptake function and the excretion function of the kidneys can be evaluated pixel by pixel, and regional diagnostic information on renal function is obtained. Gamma Camera image data are required by this model and a screening test based renal function measurement is provided. The regional blood background is subtracted from the kidney region of interest (ROI) and the kidney regional rate constants are estimated analytically using the Kuhn-Pucker multiplier method in convex programming by considering the input/output behavior of the kidney compartments. The detailed physiological model of the peripheral compartments of the system, which is not available for most radionuclide tracers, is not required in the determination of the kidney regional rate constants and the regional blood background factors within the kidney ROI. Moreover, the statistical significance of measurements is considered to assure the improved statistical properties of the estimated kidney rate constants. The relations between various renal function parameters and the kidney rate constants are established. Multiple renal function measurements can be found from the renal compartmental model. The blood radioactivity curve and the regional (or total) radiorenogram determining the regional (or total) summed behavior of the kidneys are obtained analytically with the consideration of the statistical significance of measurements using convex programming methods for a single peripheral compartment system. In addition, a new technique for the determination of 'initial conditions' in both the blood compartment and the kidney compartment is presented. The blood curve and the radiorenogram are analyzed in great detail and a physiological analysis from the radiorenogram is given. Applications of Kuhn-Tucker multiplier methods are illustrated for the renal compartmental model in the field of nuclear medicine. Conventional kinetic data analysis methods, the maximum likehood method, and the weighted integration method are investigated and used for comparisons. Moreover, the effect of the blood background subtraction is shown by using the gamma camera images in man. Several functional images are calculated and the functional imaging technique is applied for evaluating renal function in man quantitatively and visually and compared with comments from a physician.

Amalgamating Esthetics, Function and Comfort in Full Mouth Rehabilitation – A Case Report

PubMed Central

Thakral, Rashmi; Arora, Saurabh; Sharma, Neeraj; Chawla, Chetan

2014-01-01

Restoration of aesthetics, function and comfort in badly compromised dentition and its supporting tissues often poses a great challenge. The long term success of such cases depends largely on simultaneous achieving of satisfying aesthetics and a harmonious occlusion. Proper examination, evaluation and diagnosis of the prevailing oral conditions serve as a prelude to a rationalized treatment plan and its ultimate success. Invariably, it also becomes significant to understand and recognize the consequences of long term negligence by the patient. An unattended such condition, apart from causing compromised oral functions may also lead to neuromuscular problems in and around temporo-mandibular joint (TMJ) causing frequent pain in the region and unyielding headaches. Restoring physiologically advised health conditions from habitual positions and functions may require time, patience and effort by both – the patient and the dentist. A complete rehabilitation may also require involvement of more than one disciplines of dentistry. The case report highlights the contributions from prosthodontists, periodontists, endodontists and the radiologist as a team in complete rehabilitation of the patient. PMID:24959521

[Upper limb functional assessment scale for children with Duchenne muscular dystrophy and Spinal muscular atrophy].

PubMed

Escobar, Raúl G; Lucero, Nayadet; Solares, Carmen; Espinoza, Victoria; Moscoso, Odalie; Olguín, Polín; Muñoz, Karin T; Rosas, Ricardo

2016-08-16

Duchenne muscular dystrophy (DMD) and Spinal muscular atrophy (SMA) causes significant disability and progressive functional impairment. Readily available instruments that assess functionality, especially in advanced stages of the disease, are required to monitor the progress of the disease and the impact of therapeutic interventions. To describe the development of a scale to evaluate upper limb function (UL) in patients with DMD and SMA, and describe its validation process, which includes self-training for evaluators. The development of the scale included a review of published scales, an exploratory application of a pilot scale in healthy children and those with DMD, self-training of evaluators in applying the scale using a handbook and video tutorial, and assessment of a group of children with DMD and SMA using the final scale. Reliability was assessed using Cronbach and Kendall concordance and with intra and inter-rater test-retest, and validity with concordance and factorial analysis. A high level of reliability was observed, with high internal consistency (Cronbach α=0.97), and inter-rater (Kendall W=0.96) and intra-rater concordance (r=0.97 to 0.99). The validity was demonstrated by the absence of significant differences between results by different evaluators with an expert evaluator (F=0.023, P>.5), and by the factor analysis that showed that four factors account for 85.44% of total variance. This scale is a reliable and valid tool for assessing UL functionality in children with DMD and SMA. It is also easily implementable due to the possibility of self-training and the use of simple and inexpensive materials. Copyright © 2016 Sociedad Chilena de Pediatría. Publicado por Elsevier España, S.L.U. All rights reserved.

Telerobotic on-orbit remote fluid resupply system

NASA Technical Reports Server (NTRS)

1990-01-01

The development of a telerobotic on-orbit fluid resupply demonstration system is described. A fluid transfer demonstration system was developed which functionally simulates operations required to remotely transfer fluids (liquids or gases) from a servicing spacecraft to a receiving spacecraft through the use of telerobotic manipulations. The fluid system is representative of systems used by current or planned spacecraft and propulsion stages requiring on-orbit remote resupply. The system was integrated with an existing MSFC remotely controlled manipulator arm to mate/demate couplings for demonstration and evaluation of a complete remotely operated fluid transfer system.

Shuttle program. MCC level C formulation requirements: Shuttle TAEM guidance and flight control

NASA Technical Reports Server (NTRS)

Carman, G. L.

1980-01-01

The Level C requirements for the shuttle orbiter terminal area energy management (TAEM) guidance and flight control functions to be incorporated into the Mission Control Center entry profile planning processor are defined. This processor will be used for preentry evaluation of the entry through landing maneuvers, and will include a simplified three degree-of-freedom model of the body rotational dynamics that is necessary to account for the effects of attitude response on the trajectory dynamics. This simulation terminates at TAEM-autoland interface.

Development of optimized techniques and requirements for computer enhancement of structural weld radiographs. Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Adams, J. R.; Hawley, S. W.; Peterson, G. R.; Salinger, S. S.; Workman, R. A.

1971-01-01

A hardware and software specification covering requirements for the computer enhancement of structural weld radiographs was considered. Three scanning systems were used to digitize more than 15 weld radiographs. The performance of these systems was evaluated by determining modulation transfer functions and noise characteristics. Enhancement techniques were developed and applied to the digitized radiographs. The scanning parameters of spot size and spacing and film density were studied to optimize the information content of the digital representation of the image.

[Teaching skills of functional assessment to medical students: why not playing games?].

PubMed

Huber, Philippe; Saber, Abdelmalek; Schnellmann, Yves; Gold, Gabriel

2012-11-07

Today, physicians take care of an aging population suffering from multiple chronic diseases and disabilities. Therefore, a good knowledge of functional assessment is required, and this topic should be addressed in the undergraduate medical curriculum. This article reports our experience with a seminar on functional assessment using an "aging game" as a pedagogic vector. This seminar is organized by geriatricians, occupational therapists and physical therapists. Medical students are exposed to situations where they experiment disabilities and try to elaborate compensatory strategies. Then, they reflect on a complex discharge project by analyzing a written clinical case. Finally, they are introduced to the use of validated functional assessment instruments. Evaluation indicated that this pedagogic approach is highly valued by students and fosters the acquisition of knowledge in functional assessment.

Range compensation for backscattering measurements in the difference-frequency nearfield of a parametric sonar.

PubMed

Foote, Kenneth G

2012-05-01

Measurement of acoustic backscattering properties of targets requires removal of the range dependence of echoes. This process is called range compensation. For conventional sonars making measurements in the transducer farfield, the compensation removes effects of geometrical spreading and absorption. For parametric sonars consisting of a parametric acoustic transmitter and a conventional-sonar receiver, two additional range dependences require compensation when making measurements in the nonlinearly generated difference-frequency nearfield: an apparently increasing source level and a changing beamwidth. General expressions are derived for range compensation functions in the difference-frequency nearfield of parametric sonars. These are evaluated numerically for a parametric sonar whose difference-frequency band, effectively 1-6 kHz, is being used to observe Atlantic herring (Clupea harengus) in situ. Range compensation functions for this sonar are compared with corresponding functions for conventional sonars for the cases of single and multiple scatterers. Dependences of these range compensation functions on the parametric sonar transducer shape, size, acoustic power density, and hydrography are investigated. Parametric range compensation functions, when applied with calibration data, will enable difference-frequency echoes to be expressed in physical units of volume backscattering, and backscattering spectra, including fish-swimbladder-resonances, to be analyzed.

Functional relevance of “seed” and “non-seed” sequences in microRNA-mediated promotion of C. elegans developmental progression

PubMed Central

Zhang, Huibin; Artiles, Karen L.; Fire, Andrew Z.

2015-01-01

The founding heterochronic microRNAs, lin-4 and let-7, together with their validated targets and well-characterized phenotypes in C. elegans, offer an opportunity to test functionality of microRNAs in a developmental context. In this study, we defined sequence requirements at the microRNA level for these two microRNAs, evaluating lin-4 and let-7 mutant microRNAs for their ability to support temporal development under conditions where the wild-type lin-4 and let-7 gene products are absent. For lin-4, we found a strong requirement for seed sequences, with function drastically affected by several central mutations in the seed sequence, while rescue was retained by a set of mutations peripheral to the seed. let-7 rescuing activity was retained to a surprising degree by a variety of central seed mutations, while several non-seed mutant effects support potential noncanonical contributions to let-7 function. Taken together, this work illustrates both the functional partnership between seed and non-seed sequences in mediating C. elegans temporal development and a diversity among microRNA effectors in the contributions of seed and non-seed regions to activity. PMID:26385508

Effect of atmospheric turbulence on the bit error probability of a space to ground near infrared laser communications link using binary pulse position modulation and an avalanche photodiode detector

NASA Technical Reports Server (NTRS)

Safren, H. G.

1987-01-01

The effect of atmospheric turbulence on the bit error rate of a space-to-ground near infrared laser communications link is investigated, for a link using binary pulse position modulation and an avalanche photodiode detector. Formulas are presented for the mean and variance of the bit error rate as a function of signal strength. Because these formulas require numerical integration, they are of limited practical use. Approximate formulas are derived which are easy to compute and sufficiently accurate for system feasibility studies, as shown by numerical comparison with the exact formulas. A very simple formula is derived for the bit error rate as a function of signal strength, which requires only the evaluation of an error function. It is shown by numerical calculations that, for realistic values of the system parameters, the increase in the bit error rate due to turbulence does not exceed about thirty percent for signal strengths of four hundred photons per bit or less. The increase in signal strength required to maintain an error rate of one in 10 million is about one or two tenths of a db.

New ergonomic and functional design of digital conferencing rooms in a clinical environment

NASA Astrophysics Data System (ADS)

Ratib, Osman M.; Amato, Carlos L.; McGill, D. Ric; Liu, Brent J.; Balbona, Joseph A.; McCoy, J. Michael

2003-05-01

Clinical conferences and multidisciplinary medical rounds play a major role in patient management and decision-making relying on presentation of variety of documents: films, charts, videotapes, graphs etc. These conferences and clinical rounds are often carried out in conferencing rooms or department libraries that are usually not suitable for presentation of the data in electronic format. In most instances digital projection equipment is added to existing rooms without proper consideration to functional, ergonomic, acoustical, spatial and environmental requirements. Also, in large academic institutions, the conference rooms serve multiple purposes including as classrooms for teaching and education of students and for administrative meetings among managers and staff. In the migration toward a fully digital hospital we elected to analyze the functional requirements and optimize the ergonomic design of conferencing rooms that can accommodate clinical rounds, multidisciplinary reviews, seminars, formal lectures and department meetings. 3D computer simulation was used for better evaluation and analysis of spatial and ergonomic parameters and for gathering opinions and input from users on different design options. A critical component of the design is the understanding of the different workflow and requirements of different types of conferences and presentations that can be carried out in these conference rooms.

Integrating Human Factors into Crew Exploration Vehicle Design

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Baggerman, Susan; Campbell, paul

2007-01-01

With NASA's new Vision for Exploration to send humans beyond Earth orbit, it is critical to consider the human as a system that demands early and continuous user involvement, and an iterative prototype/test/redesign process. Addressing human-system interface issues early on can be very cost effective even cost reducing when performed early in the design and development cycle. To achieve this goal within Crew Exploration Vehicle (CEV) Project Office, human engineering (HE) team is formed. Key tasks are to apply HE requirements and guidelines to hardware/software, and provide HE design, analysis and evaluation of crew interfaces. Initial activities included many practice-orientated evaluations using low-fidelity CEV mock-ups. What follows is a description of such evaluations that focused on a HE requirement regarding Net Habitable Volume (NHV). NHV is defined as the total remaining pressurized volume available to on-orbit crew after accounting for the loss of volume due to deployed hardware and structural inefficiencies which decrease functional volume. The goal of the NHV evaluations was to develop requirements providing sufficient CEV NHV for crewmembers to live and perform tasks in support of mission goals. Efforts included development of a standard NHV calculation method using computer models and physical mockups, and crew/ stakeholder evaluations. Nine stakeholders and ten crewmembers participated in the unsuited evaluations. Six crewmembers also participated in a suited evaluation. The mock-up was outfitted with volumetric representation of sub-systems such as seats, and stowage bags. Thirteen scenarios were developed to represent mission/crew tasks and considered to be primary volume drivers (e.g., suit donning) for the CEV. Unsuited evaluations included a structured walkthrough of these tasks. Suited evaluations included timed donning of the existing launch and entry suit to simulate a contingency scenario followed by doffing/ stowing of the suits. All mockup evaluations were videotaped. Structured questionnaires were used to document user interface issues and volume impacts of layout configuration. Computer model and physical measures of the NHV agreed within 1 percent. This included measurement of the gross habitable volume, subtraction of intrusive volumes, and other non-habitable spaces. Calculation method developed was validated as a standard means of measuring NHV, and was recommended as a verification method for the NHV requirements. Evaluations confirmed that there was adequate volume for unsuited scenarios and suit donning/ doffing activity. Seats, suit design stowage and waste hygiene system noted to be critical volume drivers. The low-fidelity mock-up evaluations along with human modeling analysis generated discussions that will lead to high-level systems requirements and human-centered design decisions. This approach allowed HE requirements and operational concepts to evolve in parallel with engineering system concepts and design requirements. As the CEV design matures, these evaluations will continue and help with design decisions, and assessment, verification and validation of HE requirements.

Self Evaluation and Peer Observation of Early Career Teachers in a Standards-Based Context: Preliminary Results.

ERIC Educational Resources Information Center

Hansen, Joe B.; Schalock, Mark D.; McConney, Andrew; Rudd, Andy

This study examined the relationships between teachers' self-assessment and their ratings by master teachers on key dimensions of proficiency as defined by Oregon's Continuing Teaching Licensure (CTL) requirements, and it explored differences between teacher behaviors and practices as a function of their teacher preparation programs. It also…

Evaluation of dielectric mixing models for microwave soil moisture retrieval using data from the Combined Radar/Radiometer (ComRAD) ground-based SMAP simulator

USDA-ARS?s Scientific Manuscript database

Soil moisture measurements are required to improve our understanding of hydrological processes, ecosystem functions, and linkages between the Earth’s water, energy, and carbon cycles. The efficient retrieval of soil moisture depends on various factors in which soil dielectric mixing models are consi...

Response, Emergency Staging, Communications, Uniform Management, and Evacuation (R.E.S.C.U.M.E.) : report on functional and performance requirements, and high-level data and communication needs.

DOT National Transportation Integrated Search

1995-06-01

INTELLIGENT VEHICLE INITIATIVE OR IVI ABSTRACT THE GOAL OF THE TRAVTEK CAMERA CAR STUDY WAS TO FURNISH A DETAILED EVALUATION OF DRIVING AND NAVIGATION PERFORMANCE, SYSTEM USABILITY, AND SAFETY FOR THE TRAVTEK SYSTEM. TO ACHIEVE THIS GOAL, AN INSTRUME...

Accelerated Aging of the M119 Simulator

NASA Technical Reports Server (NTRS)

Bixon, Eric R.

2000-01-01

This paper addresses the storage requirement, shelf life, and the reliability of M119 Whistling Simulator. Experimental conditions have been determined and the data analysis has been completed for the accelerated testing of the system. A general methodology to evaluate the shelf life of the system as a function of the storage time, temperature, and relative humidity is discussed.

Design, Development and Evaluation of a Field Learning Video Blog

ERIC Educational Resources Information Center

Petrovic, Otto

2016-01-01

The research question in this paper is how a Field Learning Video Blog (FLvlog) has to be designed in order to optimize learning processes taking into account changed everyday communication habits of students. The system is designed to meet pedagogical as well as functional requirements for learning in fieldwork settings. The main difference to…

An Evaluation of App-Based and Paper-Based Number Lines for Teaching Number Comparison

ERIC Educational Resources Information Center

Weng, Pei-Lin; Bouck, Emily C.

2016-01-01

Number comparison is a fundamental skill required for academic and functional mathematics (e.g., time, money, purchasing) for students with disabilities. The most commonly used method to teach number comparison is number lines. Although historically paper number lines are used, app-based number lines may offer greater flexibility. This study…

A comparison of two modeling approaches for evaluating wildlife--habitat relationships

Treesearch

Ryan A. Long; Jonathan D. Muir; Janet L. Rachlow; John G. Kie

2009-01-01

Studies of resource selection form the basis for much of our understanding of wildlife habitat requirements, and resource selection functions (RSFs), which predict relative probability of use, have been proposed as a unifying concept for analysis and interpretation of wildlife habitat data. Logistic regression that contrasts used and available or unused resource units...

Space and Missile Systems Center Standard: Test Requirements for Ground Systems

DTIC Science & Technology

2013-09-30

Human Exposure to Radio Frequency Electromagnetic Fields , 3kHz to...5] Federal Code of Regulations FCC Part 15 Federal Code of Regulations, Title 47: Telecommunication, Part 15– Radio Frequency Devices 2.3 Non...DT&E Development test and evaluation EMC Electromagnetic compatibility FAT Factory acceptance test FCA Functional configuration audit FCC

A Case Study of Design and Usability Evaluation of the Collaborative Problem Solving Instructional Platform System

ERIC Educational Resources Information Center

Chao, Jen-Yi; Chao, Shu-Jen; Yao, Lo-Yi; Liu, Chuan-His

2016-01-01

This study used Focus Group to analyze user requirements for user interface so as to understand what capabilities of the Collaborative Problem Solving (CPS) Instructional Platform were expected by users. After 12 focus group interviews, the following four functions had been identified as essential to the CPS Instructional Platform: CPS…

An Analysis of the Field Service Function of Selected Electronics Firms

DTIC Science & Technology

1992-01-01

Customer Engineer Evaluation ............... 175 Customer Satisfaction ...................... 176 Customer Complaints ......................... 176...system to assure satisfaction of requirements for operation, maintenance, and repair of products; -- the establishment of a responsive, efficient, and cost...research. This dissertation addresses some of the identified research needs and provides a contribution to the field service body of knowledge. By analyzing

Materials management information systems.

PubMed

1996-01-01

The hospital materials management function--ensuring that goods and services get from a source to an end user--encompasses many areas of the hospital and can significantly affect hospital costs. Performing this function in a manner that will keep costs down and ensure adequate cash flow requires effective management of a large amount of information from a variety of sources. To effectively coordinate such information, most hospitals have implemented some form of materials management information system (MMIS). These systems can be used to automate or facilitate functions such as purchasing, accounting, inventory management, and patient supply charges. In this study, we evaluated seven MMISs from seven vendors, focusing on the functional capabilities of each system and the quality of the service and support provided by the vendor. This Evaluation is intended to (1) assist hospitals purchasing an MMIS by educating materials managers about the capabilities, benefits, and limitations of MMISs and (2) educate clinical engineers and information system managers about the scope of materials management within a healthcare facility. Because software products cannot be evaluated in the same manner as most devices typically included in Health Devices Evaluations, our standard Evaluation protocol was not applicable for this technology. Instead, we based our ratings on our observations (e.g., during site visits), interviews we conducted with current users of each system, and information provided by the vendor (e.g., in response to a request for information [RFI]). We divided the Evaluation into the following sections: Section 1. Responsibilities and Information Requirements of Materials Management: Provides an overview of typical materials management functions and describes the capabilities, benefits, and limitations of MMISs. Also includes the supplementary article, "Inventory Cost and Reimbursement Issues" and the glossary, "Materials Management Terminology." Section 2. The MMIS Selection Process: Outlines steps to follow and describes factors to consider when selecting an MMIS. Also includes our Materials Management Process Evaluation and Needs Assessment Worksheet (which is also available online through ECRInet(TM)) and a list of suggested interview questions to be used when gathering user experience information for systems under consideration. Section 3A. MMIS Vendor Profiles: Presents information for the evaluated systems in a standardized, easy-to-compare format. Profiles include an Executive Summary describing our findings, a discussion of user comments, a listing of MMIS specifications, and information on the vendor's business background. Section 3B. Discussion of Vendor Profile Conclusions and Ratings: Presents our ratings and summarizes our rationale for all evaluated systems. Also includes a blank Vendor Profile Template to be used when gathering information on other vendors and systems. We found that, in general, all of the evaluated systems are able to meet most of the functional needs of a materials management department. However, we did uncover significant differences in the quality of service and support provided by each vendor, and our ratings reflect these differences: we rated two of the systems Acceptable--Preferred and four of the systems Acceptable. We have not yet rated the seventh system because our user experience information may not reflect the vendor's new ownership and management. When this vendor provides the references we requested, we will interview users and supply a rating. We caution readers against basing purchasing decisions solely on our ratings. Each hospital must consider the unique needs of its users and its overall strategic plans--a process that can be aided by using our Process Evaluation and Needs Assessment Worksheet. Our conclusions can then be used to narrow down the number of vendors under consideration...

Family relationships as an explanatory variable in childhood dental caries: a systematic review of measures.

PubMed

Duijster, D; O'Malley, L; Elison, S; Van Loveren, C; Marcenes, W; Adair, P M; Pine, C M

2013-01-01

It is widely acknowledged that parental beliefs (self-efficacy) about oral health and parental oral health-related behaviours play a fundamental role in the establishment of preventative behaviours that will mitigate against the development of childhood dental caries. However, little attention has been given to the wider perspective of family functioning and family relationships on child oral health. For oral health researchers, exploration of this association requires the use of reliable, valid and appropriate assessment tools to measure family relationships. In order to promote methodologically sound research in oral health, this systematic review aims to provide a guide on self-report psychometric measures of family functioning that may be suitable to utilize when exploring childhood dental caries. This systematic review has identified 29 self-report measures of family functioning and evaluated them in terms of their psychometric support, constructs measured and potential utility for oral health research. The majority of the measures reported adequate levels of reliability and construct validity. Construct evaluation of the measures identified five core domains of family functioning, namely 'communication', 'cohesion/engagement', 'control', 'involvement' and 'authoritative/rigid parenting style'. The constructs were subsequently evaluated with respect to their potential relevance to child oral health. Herewith this review provides a framework to guide future research to explore family functioning in furthering our understanding of the development of childhood dental caries. © 2013 S. Karger AG, Basel.

[Prognostic value on recovery rates for the application of sperm preparation techniques and their evaluation in sperm function].

PubMed

Barroso, Gerardo; Chaya, Miguel; Bolaños, Rubén; Rosado, Yadira; García León, Fernando; Ibarrola, Eduardo

2005-05-01

To evaluate sperm recovery and total sperm motility in three different sperm preparation techniques (density gradient, simple washing and swim-up). A total of 290 subjects were randomly evaluated from November 2001 to March 2003. The density gradient method required Isolate (upper and lower layers). Centrifugation was performed at 400 g for 10 minutes and evaluation was done using the Makler counting chamber. The simple washing method included the use of HTF-M complemented with 7.5% of SSS, with centrifugation at 250 g, obtaining at the end 0.5 mL of the sperm sample. The swim-up method required HTF-M complemented with 7.5% of SSS, with an incubation period of 60 minutes at 37 degrees C. The demographic characteristics evaluated through their standard error, 95% ICC, and 50th percentile were similar. The application of multiple comparison tests and analysis of variance showed significant differences between the sperm preparations before and after capacitation. It was observed a superior recovery rate with the density gradient and swim-up methods; nevertheless, the samples used for the simple washing method showed a diminished sperm recovery from the original sample. Sperm preparation techniques have become very useful in male infertility treatments allowing higher sperm recovery and motility rates. The seminal parameters evaluated from the original sperm sample will determine the best sperm preparation technique in those patients who require it.

[The requirements of standard and conditions of interchangeability of medical articles].

PubMed

Men'shikov, V V; Lukicheva, T I

2013-11-01

The article deals with possibility to apply specific approaches under evaluation of interchangeability of medical articles for laboratory analysis. The development of standardized analytical technologies of laboratory medicine and formulation of requirements of standards addressed to manufacturers of medical articles the clinically validated requirements are to be followed. These requirements include sensitivity and specificity of techniques, accuracy and precision of research results, stability of reagents' quality in particular conditions of their transportation and storage. The validity of requirements formulated in standards and addressed to manufacturers of medical articles can be proved using reference system, which includes master forms and standard samples, reference techniques and reference laboratories. This approach is supported by data of evaluation of testing systems for measurement of level of thyrotrophic hormone, thyroid hormones and glycated hemoglobin HB A1c. The versions of testing systems can be considered as interchangeable only in case of results corresponding to the results of reference technique and comparable with them. In case of absence of functioning reference system the possibilities of the Joined committee of traceability in laboratory medicine make it possible for manufacturers of reagent sets to apply the certified reference materials under development of manufacturing of sets for large listing of analytes.

Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products

NASA Astrophysics Data System (ADS)

Fauzi, Ilham; Muharram Hasby, Fariz; Irianto, Dradjad

2018-03-01

Although government is able to make mandatory standards that must be obeyed by the industry, the respective industries themselves often have difficulties to fulfil the requirements described in those standards. This is especially true in many small and medium sized enterprises that lack the required capital to invest in standard-compliant equipment and machineries. This study aims to develop a set of measurement tools for evaluating the level of readiness of production technology with respect to the requirements of a product standard based on the quality function deployment (QFD) method. By combining the QFD methodology, UNESCAP Technometric model [9] and Analytic Hierarchy Process (AHP), this model is used to measure a firm’s capability to fulfill government standard in the toy making industry. Expert opinions from both the governmental officers responsible for setting and implementing standards and the industry practitioners responsible for managing manufacturing processes are collected and processed to find out the technological capabilities that should be improved by the firm to fulfill the existing standard. This study showed that the proposed model can be used successfully to measure the gap between the requirements of the standard and the readiness of technoware technological component in a particular firm.

Abdominal Pain in Children: From the Eternal City to the Examination Room.

PubMed

Zeiter, Donna K

2017-06-01

Abdominal pain is a common presenting symptom in children. The differential diagnosis of abdominal pain is extensive; however, a vast majority of patients ultimately are diagnosed with functional abdominal pain disorders. Functional gastrointestinal disorders are defined using the recently released Rome IV criteria. These are not diagnoses of exclusion. If there are no alarm signs, the diagnosis may be made with a focused evaluation. Treatment of these disorders requires a biopsychosocial approach to the disorder and an individualized and multipronged treatment plan. Copyright © 2017 Elsevier Inc. All rights reserved.

Multilayer coatings on glass for painting protection and optimized color rendering

NASA Astrophysics Data System (ADS)

Piegari, Angela; Polato, Pietro

2002-06-01

Optical coatings offer a solution to the problem of damage to paintings, caused by ultraviolet and infrared radiation, by cutting radiation wavelengths outside the visible range. Simultaneously, these coatings can enhance an observer's viewing of the paintings by reducing the reflections from ordinary glass panes. All these functions should be performed by the same coating. The design of such a coating, as well as the evaluation of existing products, requires the definition of an appropriate merit function in which coating absorption, high transparency, and color rendering are combined.

Optimized Vertex Method and Hybrid Reliability

NASA Technical Reports Server (NTRS)

Smith, Steven A.; Krishnamurthy, T.; Mason, B. H.

2002-01-01

A method of calculating the fuzzy response of a system is presented. This method, called the Optimized Vertex Method (OVM), is based upon the vertex method but requires considerably fewer function evaluations. The method is demonstrated by calculating the response membership function of strain-energy release rate for a bonded joint with a crack. The possibility of failure of the bonded joint was determined over a range of loads. After completing the possibilistic analysis, the possibilistic (fuzzy) membership functions were transformed to probability density functions and the probability of failure of the bonded joint was calculated. This approach is called a possibility-based hybrid reliability assessment. The possibility and probability of failure are presented and compared to a Monte Carlo Simulation (MCS) of the bonded joint.

Family Functions and Life Quality of Parents of Children With Cleft Lip and Palate.

PubMed

Aslan, Belma I; Gülşen, Ayşe; Tirank, Şadiye B; Findikçioğlu, Kemal; Uzuner, F Deniz; Tutar, Hakan; Üçüncü, Neslihan

2018-05-15

This study was designed to identify variables affecting family functions and life quality of parents with cleft lip and/or palate children. Family Assesment Scale (FAS) and short form of World Health Organization quality of life (WHOQOL-BREF-TR) were used to measure family functions and life quality of parents. Questionnaire Forms were given to 146 parents: 74 having cleft lip and/or palate children (cleft-group), and the other 72 with healthy children (control-group). Parents were divided into 3 subgroups according to children's age as 0 to 6, 7 to 12, and 13 to 18 years. Kruskal-Wallis and Mann-Whitney U tests were used to evaluate differences between the groups. Behavior of cleft patients' parents was found to be problematic in behavioral control, required attention and role areas at 0 to 6 years, required attention area at ages 7 to 12 and 13 to 18 years. When compared to control group, significant differences were detected in required attention at ages 0 to 6 years, problem-solving, and communication areas at 7 to 12 years. Findings of life quality were found to be over medium level in physical, social, psychological and environmental areas in cleft group at all age groups; however, life quality was found better in control group in physical, psychological, and social subtests at age 13 to 18 years. Cleft children influence family functions in behavioral control, required attention and role areas at early childhood, and continue to affect required attention through adolescence. Also social, physical, and psychological fields of life quality were found lower in cleft parents compared to control group at adolescence.

High temperature insulation materials for reradiative thermal protection systems

NASA Technical Reports Server (NTRS)

Hughes, T. A.

1972-01-01

Results are presented of a two year program to evaluate packaged thermal insulations for use under a metallic radiative TPS of a shuttle orbiter vehicle. Evaluations demonstrated their survival for up to 100 mission reuse cycles under shuttle acoustic and thermal loads with peak temperatures of 1000 F, 1800 F, 2000 F, 2200 F and 2500 F. The specimens were composed of low density refractory fiber felts, packaged in thin gage metal foils. In addition, studies were conducted on the venting requirements of the packages, salt spray resistance of the metal foils, and the thermal conductivity of many of the insulations as a function of temperature and ambient air pressure. Data is also presented on the radiant energy transport through insulations, and back-scattering coefficients were experimentally determined as a function of source temperature.

SEASAT economic assessment. Volume 10: The SATIL 2 program (a program for the evaluation of the costs of an operational SEASAT system as a function of operational requirements and reliability. [computer programs for economic analysis and systems analysis of SEASAT satellite systems

NASA Technical Reports Server (NTRS)

1975-01-01

The SATIL 2 computer program was developed to assist with the programmatic evaluation of alternative approaches to establishing and maintaining a specified mix of operational sensors on spacecraft in an operational SEASAT system. The program computes the probability distributions of events (i.e., number of launch attempts, number of spacecraft purchased, etc.), annual recurring cost, and present value of recurring cost. This is accomplished for the specific task of placing a desired mix of sensors in orbit in an optimal fashion in order to satisfy a specified sensor demand function. Flow charts are shown, and printouts of the programs are given.

Using an expanding nondirect product harmonic basis with an iterative eigensolver to compute vibrational energy levels with as many as seven atoms.

PubMed

Brown, James; Carrington, Tucker

2016-10-14

We demonstrate that it is possible to use a variational method to compute 50 vibrational levels of ethylene oxide (a seven-atom molecule) with convergence errors less than 0.01 cm -1 . This is done by beginning with a small basis and expanding it to include product basis functions that are deemed to be important. For ethylene oxide a basis with fewer than 3 × 10 6 functions is large enough. Because the resulting basis has no exploitable structure we use a mapping to evaluate the matrix-vector products required to use an iterative eigensolver. The expanded basis is compared to bases obtained from pre-determined pruning condition. Similar calculations are presented for molecules with 3, 4, 5, and 6 atoms. For the 6-atom molecule, CH 3 CH, the required expanded basis has about 106 000 functions and is about an order of magnitude smaller than bases made with a pre-determined pruning condition.

Time Varying Compensator Design for Reconfigurable Structures Using Non-Collocated Feedback

NASA Technical Reports Server (NTRS)

Scott, Michael A.

1996-01-01

Analysis and synthesis tools are developed to improved the dynamic performance of reconfigurable nonminimum phase, nonstrictly positive real-time variant systems. A novel Spline Varying Optimal (SVO) controller is developed for the kinematic nonlinear system. There are several advantages to using the SVO controller, in which the spline function approximates the system model, observer, and controller gain. They are: The spline function approximation is simply connected, thus the SVO controller is more continuous than traditional gain scheduled controllers when implemented on a time varying plant; ft is easier for real-time implementations in storage and computational effort; where system identification is required, the spline function requires fewer experiments, namely four experiments; and initial startup estimator transients are eliminated. The SVO compensator was evaluated on a high fidelity simulation of the Shuttle Remote Manipulator System. The SVO controller demonstrated significant improvement over the present arm performance: (1) Damping level was improved by a factor of 3; and (2) Peak joint torque was reduced by a factor of 2 following Shuttle thruster firings.

Noise tolerance in optical waveguide circuits for recognition of optical 16 quadrature amplitude modulation codes

NASA Astrophysics Data System (ADS)

Inoshita, Kensuke; Hama, Yoshimitsu; Kishikawa, Hiroki; Goto, Nobuo

2016-12-01

In photonic label routers, various optical signal processing functions are required; these include optical label extraction, recognition of the label, optical switching and buffering controlled by signals based on the label information and network routing tables, and label rewriting. Among these functions, we focus on photonic label recognition. We have proposed two kinds of optical waveguide circuits to recognize 16 quadrature amplitude modulation codes, i.e., recognition from the minimum output port and from the maximum output port. The recognition function was theoretically analyzed and numerically simulated by finite-difference beam-propagation method. We discuss noise tolerance in the circuit and show numerically simulated results to evaluate bit-error-rate (BER) characteristics against optical signal-to-noise ratio (OSNR). The OSNR required to obtain a BER less than 1.0×10-3 for the symbol rate of 2.5 GBaud was 14.5 and 27.0 dB for recognition from the minimum and maximum output, respectively.

Cytotoxicity of Protein-Carbon Nanotubes on J774 Macrophages Is a Functionalization Grade-Dependent Effect

PubMed Central

Montes-Fonseca, Silvia Lorena; Sánchez-Ramírez, Blanca; Luna-Velasco, Antonia; Arzate-Quintana, Carlos; Silva-Cazares, Macrina Beatriz; González Horta, Carmen

2015-01-01

Carbon nanotubes (CNTs) are used as carriers in medicine due to their ability to be functionalized with chemical substances. However, cytotoxicity analysis is required prior to use for in vivo models. The aim of this study was to evaluate the cytotoxic effect of CNTs functionalized with a 46 kDa surface protein from Entamoeba histolytica (P46-CNTs) on J774A macrophages. With this purpose, CNTs were synthesized by spray pyrolysis and purified (P-CNTs) using sonication for 48 h. A 46 kDa protein, with a 4.6–5.4 pI range, was isolated from E. histolytica HM1:IMSS strain trophozoites using an OFFGEL system. The P-CNTs were functionalized with the purified 46 kDa protein, classified according to their degree of functionalization, and characterized by Raman and Infrared spectroscopy. In vitro cytotoxicity was evaluated by MTT, apoptosis, and morphological assays. The results demonstrated that P46-CNTs exhibited cytotoxicity dependent upon the functionalized grade. Contrary to what was expected, P46-CNTs with a high grade of functionalization were more toxic to J774 macrophages than P46-CNTs with a low grade of functionalization, than P-CNTs, and had a similar level of toxicity as UP-CNT. This suggests that the nature of the functionalized protein plays a key role in the cytotoxicity of these nanoparticles. PMID:26075262

The CDM Superfamily Protein MBC Directs Myoblast Fusion through a Mechanism That Requires Phosphatidylinositol 3,4,5-Triphosphate Binding but Is Independent of Direct Interaction with DCrk▿§

PubMed Central

Balagopalan, Lakshmi; Chen, Mei-Hui; Geisbrecht, Erika R.; Abmayr, Susan M.

2006-01-01

myoblast city (mbc), a member of the CDM superfamily, is essential in the Drosophila melanogaster embryo for fusion of myoblasts into multinucleate fibers. Using germ line clones in which both maternal and zygotic contributions were eliminated and rescue of the zygotic loss-of-function phenotype, we established that mbc is required in the fusion-competent subset of myoblasts. Along with its close orthologs Dock180 and CED-5, MBC has an SH3 domain at its N terminus, conserved internal domains termed DHR1 and DHR2 (or “Docker”), and C-terminal proline-rich domains that associate with the adapter protein DCrk. The importance of these domains has been evaluated by the ability of MBC mutations and deletions to rescue the mbc loss-of-function muscle phenotype. We demonstrate that the SH3 and Docker domains are essential. Moreover, ethyl methanesulfonate-induced mutations that change amino acids within the MBC Docker domain to residues that are conserved in other CDM family members nevertheless eliminate MBC function in the embryo, which suggests that these sites may mediate interactions specific to Drosophila MBC. A functional requirement for the conserved DHR1 domain, which binds to phosphatidylinositol 3,4,5-triphosphate, implicates phosphoinositide signaling in myoblast fusion. Finally, the proline-rich C-terminal sites mediate strong interactions with DCrk, as expected. These sites are not required for MBC to rescue the muscle loss-of-function phenotype, however, which suggests that MBC's role in myoblast fusion can be carried out independently of direct DCrk binding. PMID:17030600

Validation of a Functional Pyelocalyceal Renal Model for the Evaluation of Renal Calculi Passage While Riding a Roller Coaster.

PubMed

Mitchell, Marc A; Wartinger, David D

2016-10-01

The identification and evaluation of activities capable of dislodging calyceal renal calculi require a patient surrogate or validated functional pyelocalyceal renal model. To evaluate roller coaster facilitation of calyceal renal calculi passage using a functional pyelocalyceal renal model. A previously described adult ureteroscopy and renoscopy simulator (Ideal Anatomic) was modified and remolded to function as a patient surrogate. Three renal calculi of different sizes from the patient who provided the original computed tomographic urograph on which the simulator was based were used. The renal calculi were suspended in urine in the model and taken for 20 rides on the Big Thunder Mountain Railroad roller coaster at Walt Disney World in Orlando, Florida. The roller coaster rides were analyzed using variables of renal calculi volume, calyceal location, model position on the roller coaster, and renal calculi passage. Sixty renal calculi rides were analyzed. Independent of renal calculi volume and calyceal location, front seating on the roller coaster resulted in a passage rate of 4 of 24. Independent of renal calculi volume and calyceal location, rear seating on the roller coaster resulted in a passage rate of 23 of 36. Independent of renal calculi volume in rear seating, calyceal location differed in passage rates, with an upper calyceal calculi passage rate of 100%; a middle calyceal passage rate of 55.6%; and a lower calyceal passage rate of 40.0%. The functional pyelocalyceal renal model serves as a functional patient surrogate to evaluate activities that facilitate calyceal renal calculi passage. The rear seating position on the roller coaster led to the most renal calculi passages.

Hubble Space Telescope solar cell module thermal cycle test

NASA Technical Reports Server (NTRS)

Douglas, Alexander; Edge, Ted; Willowby, Douglas; Gerlach, Lothar

1992-01-01

The Hubble Space Telescope (HST) solar array consists of two identical double roll-out wings designed after the Hughes flexible roll-up solar array (FRUSA) and was developed by the European Space Agency (ESA) to meet specified HST power output requirements at the end of 2 years, with a functional lifetime of 5 years. The requirement that the HST solar array remain functional both mechanically and electrically during its 5-year lifetime meant that the array must withstand 30,000 low Earth orbit (LEO) thermal cycles between approximately +100 and -100 C. In order to evaluate the ability of the array to meet this requirement, an accelerated thermal cycle test in vacuum was conducted at NASA's Marshall Space Flight Center (MSFC), using two 128-cell solar array modules which duplicated the flight HST solar array. Several other tests were performed on the modules. The thermal cycle test was interrupted after 2,577 cycles, and a 'cold-roll' test was performed on one of the modules in order to evaluate the ability of the flight array to survive an emergency deployment during the dark (cold) portion of an orbit. A posttest static shadow test was performed on one of the modules in order to analyze temperature gradients across the module. Finally, current in-flight electrical performance data from the actual HST flight solar array will be tested.

A Liquid-Handling Robot for Automated Attachment of Biomolecules to Microbeads.

PubMed

Enten, Aaron; Yang, Yujia; Ye, Zihan; Chu, Ryan; Van, Tam; Rothschild, Ben; Gonzalez, Francisco; Sulchek, Todd

2016-08-01

Diagnostics, drug delivery, and other biomedical industries rely on cross-linking ligands to microbead surfaces. Microbead functionalization requires multiple steps of liquid exchange, incubation, and mixing, which are laborious and time intensive. Although automated systems exist, they are expensive and cumbersome, limiting their routine use in biomedical laboratories. We present a small, bench-top robotic system that automates microparticle functionalization and streamlines sample preparation. The robot uses a programmable microcontroller to regulate liquid exchange, incubation, and mixing functions. Filters with a pore diameter smaller than the minimum bead diameter are used to prevent bead loss during liquid exchange. The robot uses three liquid reagents and processes up to 10(7) microbeads per batch. The effectiveness of microbead functionalization was compared with a manual covalent coupling process and evaluated via flow cytometry and fluorescent imaging. The mean percentages of successfully functionalized beads were 91% and 92% for the robot and manual methods, respectively, with less than 5% bead loss. Although the two methods share similar qualities, the automated approach required approximately 10 min of active labor, compared with 3 h for the manual approach. These results suggest that a low-cost, automated microbead functionalization system can streamline sample preparation with minimal operator intervention. © 2015 Society for Laboratory Automation and Screening.

Classifier-Guided Sampling for Complex Energy System Optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Backlund, Peter B.; Eddy, John P.

2015-09-01

This report documents the results of a Laboratory Directed Research and Development (LDRD) effort enti tled "Classifier - Guided Sampling for Complex Energy System Optimization" that was conducted during FY 2014 and FY 2015. The goal of this proj ect was to develop, implement, and test major improvements to the classifier - guided sampling (CGS) algorithm. CGS is type of evolutionary algorithm for perform ing search and optimization over a set of discrete design variables in the face of one or more objective functions. E xisting evolutionary algorithms, such as genetic algorithms , may require a large number of omore » bjecti ve function evaluations to identify optimal or near - optimal solutions . Reducing the number of evaluations can result in significant time savings, especially if the objective function is computationally expensive. CGS reduce s the evaluation count by us ing a Bayesian network classifier to filter out non - promising candidate designs , prior to evaluation, based on their posterior probabilit ies . In this project, b oth the single - objective and multi - objective version s of the CGS are developed and tested on a set of benchm ark problems. As a domain - specific case study, CGS is used to design a microgrid for use in islanded mode during an extended bulk power grid outage.« less

Use of Model-Based Design Methods for Enhancing Resiliency Analysis of Unmanned Aerial Vehicles

NASA Astrophysics Data System (ADS)

Knox, Lenora A.

The most common traditional non-functional requirement analysis is reliability. With systems becoming more complex, networked, and adaptive to environmental uncertainties, system resiliency has recently become the non-functional requirement analysis of choice. Analysis of system resiliency has challenges; which include, defining resilience for domain areas, identifying resilience metrics, determining resilience modeling strategies, and understanding how to best integrate the concepts of risk and reliability into resiliency. Formal methods that integrate all of these concepts do not currently exist in specific domain areas. Leveraging RAMSoS, a model-based reliability analysis methodology for Systems of Systems (SoS), we propose an extension that accounts for resiliency analysis through evaluation of mission performance, risk, and cost using multi-criteria decision-making (MCDM) modeling and design trade study variability modeling evaluation techniques. This proposed methodology, coined RAMSoS-RESIL, is applied to a case study in the multi-agent unmanned aerial vehicle (UAV) domain to investigate the potential benefits of a mission architecture where functionality to complete a mission is disseminated across multiple UAVs (distributed) opposed to being contained in a single UAV (monolithic). The case study based research demonstrates proof of concept for the proposed model-based technique and provides sufficient preliminary evidence to conclude which architectural design (distributed vs. monolithic) is most resilient based on insight into mission resilience performance, risk, and cost in addition to the traditional analysis of reliability.

A finite element evaluation of mechanical function for 3 distal extension partial dental prosthesis designs with a 3-dimensional nonlinear method for modeling soft tissue.

PubMed

Nakamura, Yoshinori; Kanbara, Ryo; Ochiai, Kent T; Tanaka, Yoshinobu

2014-10-01

The mechanical evaluation of the function of partial removable dental prostheses with 3-dimensional finite element modeling requires the accurate assessment and incorporation of soft tissue behavior. The differential behaviors of the residual ridge mucosa and periodontal ligament tissues have been shown to exhibit nonlinear displacement. The mathematic incorporation of known values simulating nonlinear soft tissue behavior has not been investigated previously via 3-dimensional finite element modeling evaluation to demonstrate the effect of prosthesis design on the supporting tissues. The purpose of this comparative study was to evaluate the functional differences of 3 different partial removable dental prosthesis designs with 3-dimensional finite element analysis modeling and a simulated patient model incorporating known viscoelastic, nonlinear soft tissue properties. Three different designs of distal extension removable partial dental prostheses were analyzed. The stress distributions to the supporting abutments and soft tissue displacements of the designs tested were calculated and mechanically compared. Among the 3 dental designs evaluated, the RPI prosthesis demonstrated the lowest stress concentrations on the tissue supporting the tooth abutment and also provided wide mucosa-borne areas of support, thereby demonstrating a mechanical advantage and efficacy over the other designs evaluated. The data and results obtained from this study confirmed that the functional behavior of partial dental prostheses with supporting abutments and soft tissues are consistent with the conventional theories of design and clinical experience. The validity and usefulness of this testing method for future applications and testing protocols are shown. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Using game authoring platforms to develop screen-based simulated functional assessments in persons with executive dysfunction following traumatic brain injury.

PubMed

Martínez-Pernía, David; Núñez-Huasaf, Javier; Del Blanco, Ángel; Ruiz-Tagle, Amparo; Velásquez, Juan; Gomez, Mariela; Robert Blesius, Carl; Ibañez, Agustin; Fernández-Manjón, Baltasar; Slachevsky, Andrea

2017-10-01

The assessment of functional status is a critical component of clinical neuropsychological evaluations used for both diagnostic and therapeutic purposes in patients with cognitive brain disorders. There are, however, no widely adopted neuropsychological tests that are both ecologically valid and easily administered in daily clinical practice. This discrepancy is a roadblock to the widespread adoption of functional assessments. In this paper, we propose a novel approach using a serious game authoring platform (eAdventure) for creating screen-based simulated functional assessments. We created a naturalistic functional task that consisted of preparing a cup of tea (SBS-COT) and applied the assessment in a convenience sample of eight dyads of therapists/patients with mild executive dysfunction after traumatic brain injury. We had three main aims. First, we performed a comprehensive review of executive function assessment in activities of daily living. Second, we were interested in measuring the feasibility of this technology with respect to staffing, economic and technical requirements. Third, a serious game was administered to patients to study the feasibility of this technology in the clinical context (pre-screening test). In addition, quantitative (Technology Acceptance Model (TAM) questionnaires) and qualitative (semistructured interviews) evaluations were applied to obtain user input. Our results suggest that the staffing, economic and technical requirements of the SBS-COT are feasible. The outcomes of the pre-screening test provide evidence that this technology is useful in the functional assessment of patients with executive dysfunction. In relation to subjective data, the TAM questionnaire showed good user acceptability from a professional perspective. Interview analyses with professionals and patients showed positive experiences related to the use of the SBS-COT. Our work indicates that the use of these types of authoring platforms could have positive long-term implications for neuropsychological research, opening the door to more reproducible, cooperative and efficient research by allowing the facilitated production, reuse and sharing of neuropsychological assessment tools. Copyright © 2017 Elsevier Inc. All rights reserved.

Definition and means of maintaining the supply ventilation system seismic shutdown portion of the PFP safety envelope

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keck, R.D.

1997-01-21

The purpose of this document is to record the technical evaluation of the Limiting Condition for Operation (LCO) described in the Plutonium Finishing Plant (PFP) Operational Safety Requirements, WHC-SD-CP-OSR- 010, Rev. 0. Kay 1994, Section 3.2.3, `Supply Ventilation System Seismic Shutdown.` This document, with its appendices, provides the following: 1. The system functional requirements for determining system operability (Section 3). 2. Evaluations of equipment to determine the safety boundary for the system (Section 4). 3. A list of annotated drawings which show the safety envelope boundaries (Appendix C). 4. A list of the safety envelope equipment (Appendix B). 5. Functionalmore » requirements for the individual safety envelope equipment, including appropriate setpoints and process parameters (Section 4.1). 6. A list of the operational, maintenance and surveillance procedures necessary to operate and maintain the system equipment within the safety envelope (Sections 5 and 6 and Appendix A).« less

Comparative evaluation of urban storm water quality models

NASA Astrophysics Data System (ADS)

Vaze, J.; Chiew, Francis H. S.

2003-10-01

The estimation of urban storm water pollutant loads is required for the development of mitigation and management strategies to minimize impacts to receiving environments. Event pollutant loads are typically estimated using either regression equations or "process-based" water quality models. The relative merit of using regression models compared to process-based models is not clear. A modeling study is carried out here to evaluate the comparative ability of the regression equations and process-based water quality models to estimate event diffuse pollutant loads from impervious surfaces. The results indicate that, once calibrated, both the regression equations and the process-based model can estimate event pollutant loads satisfactorily. In fact, the loads estimated using the regression equation as a function of rainfall intensity and runoff rate are better than the loads estimated using the process-based model. Therefore, if only estimates of event loads are required, regression models should be used because they are simpler and require less data compared to process-based models.

ASSESSING AND COMBINING RELIABILITY OF PROTEIN INTERACTION SOURCES

PubMed Central

LEACH, SONIA; GABOW, AARON; HUNTER, LAWRENCE; GOLDBERG, DEBRA S.

2008-01-01

Integrating diverse sources of interaction information to create protein networks requires strategies sensitive to differences in accuracy and coverage of each source. Previous integration approaches calculate reliabilities of protein interaction information sources based on congruity to a designated ‘gold standard.’ In this paper, we provide a comparison of the two most popular existing approaches and propose a novel alternative for assessing reliabilities which does not require a gold standard. We identify a new method for combining the resultant reliabilities and compare it against an existing method. Further, we propose an extrinsic approach to evaluation of reliability estimates, considering their influence on the downstream tasks of inferring protein function and learning regulatory networks from expression data. Results using this evaluation method show 1) our method for reliability estimation is an attractive alternative to those requiring a gold standard and 2) the new method for combining reliabilities is less sensitive to noise in reliability assignments than the similar existing technique. PMID:17990508

Certifying leaders? high-quality management practices and healthy organisations: an ISO-9000 based standardisation approach

PubMed Central

MONTANO, Diego

2016-01-01

The present study proposes a set of quality requirements to management practices by taking into account the empirical evidence on their potential effects on health, the systemic nature of social organisations, and the current conceptualisations of management functions within the framework of comprehensive quality management systems. Systematic reviews and meta-analyses focusing on the associations between leadership and/or supervision and health in occupational settings are evaluated, and the core elements of an ISO 9001 standardisation approach are presented. Six major occupational health requirements to high-quality management practices are identified pertaining to communication processes, organisational justice, role clarity, decision making, social influence processes and management support. It is concluded that the quality of management practices may be improved by developing a quality management system of management practices that ensures not only conformity to product but also to occupational safety and health requirements. Further research may evaluate the practicability of the proposed approach. PMID:26860787

Certifying leaders? high-quality management practices and healthy organisations: an ISO-9000 based standardisation approach.

PubMed

Montano, Diego

2016-08-05

The present study proposes a set of quality requirements to management practices by taking into account the empirical evidence on their potential effects on health, the systemic nature of social organisations, and the current conceptualisations of management functions within the framework of comprehensive quality management systems. Systematic reviews and meta-analyses focusing on the associations between leadership and/or supervision and health in occupational settings are evaluated, and the core elements of an ISO 9001 standardisation approach are presented. Six major occupational health requirements to high-quality management practices are identified pertaining to communication processes, organisational justice, role clarity, decision making, social influence processes and management support. It is concluded that the quality of management practices may be improved by developing a quality management system of management practices that ensures not only conformity to product but also to occupational safety and health requirements. Further research may evaluate the practicability of the proposed approach.

Advanced Extravehicular Protective System (AEPS) study

NASA Technical Reports Server (NTRS)

Williams, J. L.; Webbon, B. W.; Copeland, R. J.

1972-01-01

A summary is presented of Advanced Extravehicular Protective Systems (AEPS) for the future missions beyond Skylab in earth orbit, on the lunar surface, and on the Martian surface. The study concentrated on the origination of regenerable life support concepts for use in portable extravehicular protective systems, and included evaluation and comparison with expendable systems, and selection of life support subsystems. The study was conducted in two phases. In the first phase, subsystem concepts for performing life support functions in AEPS which are regenerable or partially regenerable were originated, and in addition, expendable subsystems were considered. Parametric data for each subsystem concept were evolved including subsystem weight and volume, power requirement, thermal control requirement; base regeneration equipment weight and volume, requirement. The second phase involved an evaluation of the impact of safety considerations involving redundant and/or backup systems on the selection of the regenerable life support subsystems. In addition, the impact of the space shuttle program on regenerable life support subsystem development was investigated.

Swallowing function after laryngeal cleft repair: more than just fixing the cleft.

PubMed

Osborn, Alexander J; de Alarcon, Alessandro; Tabangin, Meredith E; Miller, Claire K; Cotton, Robin T; Rutter, Michael J

2014-08-01

To evaluate and describe the swallowing function in children after laryngeal cleft repair. Ten-year (2002-2012) retrospective chart review. Academic tertiary care pediatric otolaryngology practice. Records of 60 children who had surgical repair of laryngeal cleft (ages 2 weeks-14 years) and postoperative functional endoscopic evaluation of swallowing or videofluoroscopic swallow studies were examined retrospectively. Twenty-nine children had one postoperative swallow evaluation, 19 children had two, 4 children had three, 5 children had four, and 3 children had five. Median time to the first evaluation was 10.8 weeks (interquartile range [IQR]: 36.5, 231). On the final swallow evaluation, 34 (57%) children demonstrated normal swallowing parameters, 12 (20%) children showed penetration, and 14 (23%) children showed aspiration. Forty-three (72%) children were able to take everything by mouth normally or with minor behavioral modifications, 11 (18%) children required thickened fluids, and six (10%) children were kept nil per os (NPO). Mean improvement on the penetration-aspiration (pen-asp) scale was 2.13. On multivariable analysis, neurodevelopmental issues and gastronomy tube use were associated with the need for NPO status. Despite a high rate of surgical success, a substantial minority of children have persistent swallowing dysfunction after laryngeal cleft repair. Swallowing dysfunction after repair is multifactorial and arises from concomitant neurologic, anatomic, or other comorbidities that contribute to oropharyngeal and pharyngeal dysphagia. Based on our results, we recommend a testing schedule for postoperative swallowing evaluations after cleft repair. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

Oral lichen planus: a literature review and update.

PubMed

Alrashdan, Mohammad S; Cirillo, Nicola; McCullough, Michael

2016-10-01

Lichen planus (LP) is a common chronic inflammatory condition that can affect skin and mucous membranes, including the oral mucosa. Because of the anatomic, physiologic and functional peculiarities of the oral cavity, the oral variant of LP (OLP) requires specific evaluations in terms of diagnosis and management. In this comprehensive review, we discuss the current developments in the understanding of the etiopathogenesis, clinical-pathologic presentation, and treatment of OLP, and provide follow-up recommendations informed by recent data on the malignant potential of the disease as well as health economics evaluations.

New atmospheric sensor analysis study

NASA Technical Reports Server (NTRS)

Parker, K. G.

1989-01-01

The functional capabilities of the ESAD Research Computing Facility are discussed. The system is used in processing atmospheric measurements which are used in the evaluation of sensor performance, conducting design-concept simulation studies, and also in modeling the physical and dynamical nature of atmospheric processes. The results may then be evaluated to furnish inputs into the final design specifications for new space sensors intended for future Spacelab, Space Station, and free-flying missions. In addition, data gathered from these missions may subsequently be analyzed to provide better understanding of requirements for numerical modeling of atmospheric phenomena.

[Methodological approaches to the hygienic evaluation of total artificial lighting of classrooms with different light sources on the basis of the response of the cardiovascular system of schoolchildren].

PubMed

Teksheva, L M; Zvezdina, I V

2014-01-01

Hygienic evaluation of innovative equipment in educational institutions requires the use of appropriate methods permitting to establish valuable criterias for the effectiveness of the application of new technologies. The study of the response of the cardiovascular system of schoolchildren under using different light sources allowed to establish the increase in adaptive capacities and the improvement of the functional state of the organism in LED in comparison with fluorescent lighting.

Evaluation of a glaucoma patient

PubMed Central

Thomas, Ravi; Loibl, Klaus; Parikh, Rajul

2011-01-01

The diagnosis of glaucoma is usually made clinically and requires a comprehensive eye examination, including slit lamp, applanation tonometry, gonioscopy and dilated stereoscopic evaluation of the optic disc and retina. Automated perimetry is obtained if glaucoma is suspected. This establishes the presence of functional damage and provides a baseline for follow-up. Imaging techniques are not essential for the diagnosis but may have a role to play in the follow-up. We recommend a comprehensive eye examination for every clinic patient with the objective of detecting all potentially sight-threatening diseases, including glaucoma. PMID:21150033

Ground states of larger nuclei

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pieper, S.C.; Wiringa, R.B.; Pandharipande, V.R.

1995-08-01

The methods used for the few-body nuclei require operations on the complete spin-isospin vector; the size of this vector makes such methods impractical for nuclei with A > 8. During the last few years we developed cluster expansion methods that do not require operations on the complete vector. We use the same Hamiltonians as for the few-body nuclei and variational wave functions of form similar to the few-body wave functions. The cluster expansions are made for the noncentral parts of the wave functions and for the operators whose expectation values are being evaluated. The central pair correlations in the wavemore » functions are treated exactly and this requires the evaluation of 3A-dimensional integrals which are done with Monte Carlo techniques. Most of our effort was on {sup 16}O, other p-shell nuclei, and {sup 40}Ca. In 1993 the Mathematics and Computer Science Division acquired a 128-processor IBM SP which has a theoretical peak speed of 16 Gigaflops (GFLOPS). We converted our program to run on this machine. Because of the large memory on each node of the SP, it was easy to convert the program to parallel form with very low communication overhead. Considerably more effort was needed to restructure the program from one oriented towards long vectors for the Cray computers at NERSC to one that makes efficient use of the cache of the RS6000 architecture. The SP made possible complete five-body cluster calculations of {sup 16}O for the first time; previously we could only do four-body cluster calculations. These calculations show that the expectation value of the two-body potential is converging less rapidly than we had thought, while that of the three-body potential is more rapidly convergent; the net result is no significant change to our predicted binding energy for {sup 16}O using the new Argonne v{sub 18} potential and the Urbana IX three-nucleon potential. This result is in good agreement with experiment.« less

Flexible Foam Protection Materials for Constellation Space Suit Element Portable Life Support Subsystem Packaging Study

NASA Technical Reports Server (NTRS)

Tang, Henry H.; Orndoff, Evelyne S.; Thomas, Gretchen A.

2009-01-01

This paper discusses the effort in evaluating and selecting a light weight impact protection material for the Constellation Space Suit Element (CSSE) Portable Life Support Subsystem (PLSS) conceptual packaging study. A light weight material capable of holding and protecting the components inside the PLSS is required to demonstrate the viability of the flexible PLSS packaging concept. The material needs to distribute, dissipate, and absorb the impact energy of the PLSS falling on the lunar surface. It must also be very robust and function in the extreme lunar thermal vacuum environment for up to one hundred Extravehicular Activity (EVA) missions. This paper documents the performance requirements for selecting a foam protection material, and the methodologies for evaluating commercial off-the-shelf (COTS) foam protection materials. It also presents the materials properties test results and impact drop test results of the various foam materials evaluated in the study. The findings from this study suggest that a foam based flexible protection system is a viable solution for PLSS packaging. However, additional works are needed to optimize COTS foam properties or to develop a composite foam system that will meet all the performance requirements for the CSSE PLSS flexible packaging.

Attrition in longitudinal randomized controlled trials: home visits make a difference.

PubMed

Peterson, Janey C; Pirraglia, Paul A; Wells, Martin T; Charlson, Mary E

2012-11-23

Participant attrition in longitudinal studies can introduce systematic bias, favoring participants who return for follow-up, and increase the likelihood that those with complications will be underestimated. Our aim was to examine the effectiveness of home follow-up (Home F/U) to complete the final study evaluation on potentially "lost" participants by: 1) evaluating the impact of including and excluding potentially "lost" participants (e.g., those who required Home F/U to complete the final evaluation) on the rates of study complications; 2) examining the relationship between timing and number of complications on the requirement for subsequent Home F/U; and 3) determining predictors of those who required Home F/U. We used data from a randomized controlled trial (RCT) conducted from 1991-1994 among coronary artery bypass graft surgery patients that investigated the effect of High mean arterial pressure (MAP) (intervention) vs. Low MAP (control) during cardiopulmonary bypass on 5 complications: cardiac morbidity/mortality, neurologic morbidity/mortality, all-cause mortality, neurocognitive dysfunction and functional decline. We enhanced completion of the final 6-month evaluation using Home F/U. Among 248 participants, 61 (25%) required Home F/U and the remaining 187 (75%) received Routine F/U. By employing Home F/U, we detected 11 additional complications at 6 months: 1 major neurologic complication, 6 cases of neurocognitive dysfunction and 4 cases of functional decline. Follow-up of 61 additional Home F/U participants enabled us to reach statistical significance on our main trial outcome. Specifically, the High MAP group had a significantly lower rate of the Combined Trial Outcome compared to the Low MAP group, 16.1% vs. 27.4% (p=0.032). In multivariate analysis, participants who were ≥ 75 years (OR=3.23, 95% CI 1.52-6.88, p=0.002) or on baseline diuretic therapy (OR=2.44, 95% CI 1.14-5.21, p=0.02) were more likely to require Home F/U. In addition, those in the Home F/U group were more likely to have sustained 2 or more complications (p=0.05). Home visits are an effective approach to reduce attrition and improve accuracy of study outcome reporting. Trial results may be influenced by this method of reducing attrition. Older participants, those with greater medical burden and those who sustain multiple complications are at higher risk for attrition.

Integrating Flow, Form, and Function for Improved Environmental Water Management

NASA Astrophysics Data System (ADS)

Albin Lane, Belize Arela

Rivers are complex, dynamic natural systems. The performance of river ecosystem functions, such as habitat availability and sediment transport, depends on the interplay of hydrologic dynamics (flow) and geomorphic settings (form). However, most river restoration studies evaluate the role of either flow or form without regard for their dynamic interactions. Despite substantial recent interest in quantifying environmental water requirements to support integrated water management efforts, the absence of quantitative, transferable relationships between river flow, form, and ecosystem functions remains a major limitation. This research proposes a novel, process-driven methodology for evaluating river flow-form-function linkages in support of basin-scale environmental water management. This methodology utilizes publically available geospatial and time-series data and targeted field data collection to improve basic understanding of river systems with limited data and resource requirements. First, a hydrologic classification system is developed to characterize natural hydrologic variability across a highly altered, physio-climatically diverse landscape. Next, a statistical analysis is used to characterize reach-scale geomorphic variability and to investigate the utility of topographic variability attributes (TVAs, subreach-scale undulations in channel width and depth), alongside traditional reach-averaged attributes, for distinguishing dominant geomorphic forms and processes across a hydroscape. Finally, the interacting roles of flow (hydrologic regime, water year type, and hydrologic impairment) and form (channel morphology) are quantitatively evaluated with respect to ecosystem functions related to hydrogeomorphic processes, aquatic habitat, and riparian habitat. Synthetic river corridor generation is used to evaluate and isolate the role of distinct geomorphic attributes without the need for intensive topographic surveying. This three-part methodology was successfully applied in the Sacramento Basin of California, USA, a large, heavily altered Mediterranean-montane basin. A spatially-explicit hydrologic classification of California distinguished eight natural hydrologic regimes representing distinct flow sources, hydrologic characteristics, and rainfall-runoff controls. A hydro-geomorphic sub-classification of the Sacramento Basin based on stratified random field surveys of 161 stream reaches distinguished nine channel types consisting of both previously identified and new channel types. Results indicate that TVAs provide a quantitative basis for interpreting non-uniform as well as uniform geomorphic processes to better distinguish linked channel forms and functions of ecological significance. Finally, evaluation of six ecosystem functions across alternative flow-form scenarios in the Yuba River watershed highlights critical tradeoffs in ecosystem performance and emphasizes the significance of spatiotemporal diversity of flow and form for maintaining ecosystem integrity. The methodology developed in this dissertation is broadly applicable and extensible to other river systems and ecosystem functions, where findings can be used to characterize complex controls on river ecosystems, assess impacts of proposed flow and form alterations, and inform river restoration strategies. Overall, this research improves scientific understanding of the linkages between hydrology, geomorphology, and river ecosystems to more efficiently allocate scare water resources for human and environmental objectives across natural and built landscapes.

Conceptual design of a stray light facility for Earth observation satellites

NASA Astrophysics Data System (ADS)

Stockman, Y.; Hellin, M. L.; Marcotte, S.; Mazy, E.; Versluys, J.; François, M.; Taccola, M.; Zuccaro Marchi, A.

2017-11-01

With the upcoming of TMA or FMA (Three or Four Mirrors Anastigmat) telescope design in Earth Observation system, stray light is a major contributor to the degradation of the image quality. Numerous sources of stray light can be identified and theoretically evaluated. Nevertheless in order to build a stray light model of the instrument, the Point Spread Function(s) of the instrument, i.e., the flux response of the instrument to the flux received at the instrument entrance from an infinite distant point source needs to be determined. This paper presents a conceptual design of a facility placed in a vacuum chamber to eliminate undesired air particles scatter light sources. The specification of the clean room class or vacuum will depend on the required rejection to be measured. Once the vacuum chamber is closed, the stray light level from the external environment can be considered as negligible. Inside the chamber a dedicated baffle design is required to eliminate undesired light generated by the set up itself e.g. retro reflected light away from the instrument under test. This implies blackened shrouds all around the specimen. The proposed illumination system is a 400 mm off axis parabolic mirror with a focal length of 2 m. The off axis design suppresses the problem of stray light that can be generated by the internal obstruction. A dedicated block source is evaluated in order to avoid any stray light coming from the structure around the source pinhole. Dedicated attention is required on the selection of the source to achieve the required large measurement dynamic.

User-Assisted Store Recycling for Dynamic Task Graph Schedulers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurt, Mehmet Can; Krishnamoorthy, Sriram; Agrawal, Gagan

The emergence of the multi-core era has led to increased interest in designing effective yet practical parallel programming models. Models based on task graphs that operate on single-assignment data are attractive in several ways: they can support dynamic applications and precisely represent the available concurrency. However, they also require nuanced algorithms for scheduling and memory management for efficient execution. In this paper, we consider memory-efficient dynamic scheduling of task graphs. Specifically, we present a novel approach for dynamically recycling the memory locations assigned to data items as they are produced by tasks. We develop algorithms to identify memory-efficient store recyclingmore » functions by systematically evaluating the validity of a set of (user-provided or automatically generated) alternatives. Because recycling function can be input data-dependent, we have also developed support for continued correct execution of a task graph in the presence of a potentially incorrect store recycling function. Experimental evaluation demonstrates that our approach to automatic store recycling incurs little to no overheads, achieves memory usage comparable to the best manually derived solutions, often produces recycling functions valid across problem sizes and input parameters, and efficiently recovers from an incorrect choice of store recycling functions.« less

Exploring time- and frequency- dependent functional connectivity and brain networks during deception with single-trial event-related potentials

NASA Astrophysics Data System (ADS)

Gao, Jun-Feng; Yang, Yong; Huang, Wen-Tao; Lin, Pan; Ge, Sheng; Zheng, Hong-Mei; Gu, Ling-Yun; Zhou, Hui; Li, Chen-Hong; Rao, Ni-Ni

2016-11-01

To better characterize the cognitive processes and mechanisms that are associated with deception, wavelet coherence was employed to evaluate functional connectivity between different brain regions. Two groups of subjects were evaluated for this purpose: 32 participants were required to either tell the truth or to lie when facing certain stimuli, and their electroencephalogram signals on 12 electrodes were recorded. The experimental results revealed that deceptive responses elicited greater connectivity strength than truthful responses, particularly in the θ band on specific electrode pairs primarily involving connections between the prefrontal/frontal and central regions and between the prefrontal/frontal and left parietal regions. These results indicate that these brain regions play an important role in executing lying responses. Additionally, three time- and frequency-dependent functional connectivity networks were proposed to thoroughly reflect the functional coupling of brain regions that occurs during lying. Furthermore, the wavelet coherence values for the connections shown in the networks were extracted as features for support vector machine training. High classification accuracy suggested that the proposed network effectively characterized differences in functional connectivity between the two groups of subjects over a specific time-frequency area and hence could be a sensitive measurement for identifying deception.

Predicting the Pathogenicity of Aminoacyl-tRNA Synthetase Mutations

PubMed Central

Oprescu, Stephanie N.; Griffin, Laurie B.; Beg, Asim A.; Antonellis, Anthony

2016-01-01

Aminoacyl-tRNA synthetases (ARSs) are ubiquitously expressed, essential enzymes responsible for charging tRNA with cognate amino acids—the first step in protein synthesis. ARSs are required for protein translation in the cytoplasm and mitochondria of all cells. Surprisingly, mutations in 28 of the 37 nuclear-encoded human ARS genes have been linked to a variety of recessive and dominant tissue-specific disorders. Current data sustains that impaired enzyme function is a robust predictor of the pathogenicity of ARS mutations. However, experimental model systems that distinguish between pathogenic and non-pathogenic ARS variants are required for implicating newly identified ARS mutations in disease. Here, we outline strategies to assist in predicting the pathogenicity of ARS variants and urge cautious evaluation of genetic and functional data prior to linking an ARS mutation to a human disease phenotype. PMID:27876679

In situ continuous monitoring of nitrogen with ion-selective electrodes in a constructed wetland receiving treated wastewater: an operating protocol to obtain reliable data.

PubMed

Papias, Sandrine; Masson, Matthieu; Pelletant, Sébastien; Prost-Boucle, Stéphanie; Boutin, Catherine

2018-03-01

Constructed wetlands receiving treated wastewater (CWtw) are placed between wastewater treatment plants and receiving water bodies, under the perception that they increase water quality. A better understanding of the CWtw functioning is required to evaluate their real performance. To achieve this, in situ continuous monitoring of nitrate and ammonium concentrations with ion-selective electrodes (ISEs) can provide valuable information. However, this measurement needs precautions to be taken to produce good data quality, especially in areas with high effluent quality requirements. In order to study the functioning of a CWtw instrumented with six ISE probes, we have developed an appropriate methodology for probe management and data processing. It is based on an evaluation of performance in the laboratory and an adapted field protocol for calibration, data treatment and validation. The result is an operating protocol concerning an acceptable cleaning frequency of 2 weeks, a complementary calibration using CWtw water, a drift evaluation and the determination of limits of quantification (1 mgN/L for ammonium and 0.5 mgN/L for nitrate). An example of a 9-month validated dataset confirms that it is fundamental to include the technical limitations of the measuring equipment and set appropriate maintenance and calibration methodologies in order to ensure an accurate interpretation of data.

ICRS Recommendation Document

PubMed Central

Roos, Ewa M.; Engelhart, Luella; Ranstam, Jonas; Anderson, Allen F.; Irrgang, Jay J.; Marx, Robert G.; Tegner, Yelverton; Davis, Aileen M.

2011-01-01

Objective: The purpose of this article is to describe and recommend patient-reported outcome instruments for use in patients with articular cartilage lesions undergoing cartilage repair interventions. Methods: Nonsystematic literature search identifying measures addressing pain and function evaluated for validity and psychometric properties in patients with articular cartilage lesions. Results: The knee-specific instruments, titled the International Knee Documentation Committee Subjective Knee Form and the Knee injury and Osteoarthritis and Outcome Score, both fulfill the basic requirements for reliability, validity, and responsiveness in cartilage repair patients. A major difference between them is that the former results in a single score and the latter results in 5 subscores. A single score is preferred for simplicity’s sake, whereas subscores allow for evaluation of separate constructs at all levels according to the International Classification of Functioning. Conclusions: Because there is no obvious superiority of either instrument at this time, both outcome measures are recommended for use in cartilage repair. Rescaling of the Lysholm Scoring Scale has been suggested, and confirmatory longitudinal studies are needed prior to recommending this scale for use in cartilage repair. Inclusion of a generic measure is feasible in cartilage repair studies and allows analysis of health-related quality of life and health economic outcomes. The Marx or Tegner Activity Rating Scales are feasible and have been evaluated in patients with knee injuries. However, activity measures require age and sex adjustment, and data are lacking in people with cartilage repair. PMID:26069575

Single dose pharmacokinetics of the transdermal rotigotine patch in patients with impaired renal function.

PubMed

Cawello, Willi; Ahrweiler, Sascha; Sulowicz, Wladyslaw; Szymczakiewicz-Multanowska, Agnieszka; Braun, Marina

2012-01-01

To evaluate the influence of different stages of chronic renal insufficiency on the pharmacokinetics and safety/tolerability of the transdermally applied dopamine agonist rotigotine in an open label group comparison including 32 subjects (healthy, mild, moderate or severe impairment of renal function and patients with end-stage renal insufficiency requiring haemodialysis). METHODS All subjects received a single transdermal 10 cm² patch (24 h patch-on period) containing 4.5 mg rotigotine (nominal drug release 2 mg 24 h⁻¹). Main evaluations included relative bioavailability and renal elimination of rotigotine and its metabolites. Point estimates for the ratios between the groups with moderate to severe renal impairment and healthy subjects for the pharmacokinetic parameters AUC(0,t(last) ) and C(max) for the active substance unconjugated rotigotine were near 1:0.88 for AUC and 0.93 for C(max) for moderate renal impairment, 1.14 and 1.18 for severe renal impairment and 1.05 and 1.25 for end-stage renal insufficiency requiring haemodialysis. There was no correlation of these parameters with creatinine clearance. The amount of unconjugated rotigotine excreted into urine and renal clearance decreased with increasing severity of renal insufficiency but had no observable effect on total clearance as the amounts excreted were below 1% of the administered dose. Occurrence of adverse events did not increase with the degree of renal insufficiency. The pharmacokinetic profiles of unconjugated rotigotine were similar in healthy subjects and subjects with impaired renal function indicating that no dose adjustments are required for transdermal rotigotine in patients with different stages of chronic renal insufficiency including patients on haemodialysis. © 2011 UCB Biosciences GmbH. British Journal of Clinical Pharmacology © 2011 The British Pharmacological Society.

Single dose pharmacokinetics of the transdermal rotigotine patch in patients with impaired renal function

PubMed Central

Cawello, Willi; Ahrweiler, Sascha; Sulowicz, Wladyslaw; Szymczakiewicz-Multanowska, Agnieszka; Braun, Marina

2012-01-01

AIM To evaluate the influence of different stages of chronic renal insufficiency on the pharmacokinetics and safety/tolerability of the transdermally applied dopamine agonist rotigotine in an open label group comparison including 32 subjects (healthy, mild, moderate or severe impairment of renal function and patients with end-stage renal insufficiency requiring haemodialysis). METHODS All subjects received a single transdermal 10 cm2 patch (24 h patch-on period) containing 4.5 mg rotigotine (nominal drug release 2 mg 24 h−1). Main evaluations included relative bioavailability and renal elimination of rotigotine and its metabolites. RESULTS Point estimates for the ratios between the groups with moderate to severe renal impairment and healthy subjects for the pharmacokinetic parameters AUC(0,tlast) and Cmax for the active substance unconjugated rotigotine were near 1:0.88 for AUC and 0.93 for Cmax for moderate renal impairment, 1.14 and 1.18 for severe renal impairment and 1.05 and 1.25 for end-stage renal insufficiency requiring haemodialysis. There was no correlation of these parameters with creatinine clearance. The amount of unconjugated rotigotine excreted into urine and renal clearance decreased with increasing severity of renal insufficiency but had no observable effect on total clearance as the amounts excreted were below 1% of the administered dose. Occurrence of adverse events did not increase with the degree of renal insufficiency. CONCLUSIONS The pharmacokinetic profiles of unconjugated rotigotine were similar in healthy subjects and subjects with impaired renal function indicating that no dose adjustments are required for transdermal rotigotine in patients with different stages of chronic renal insufficiency including patients on haemodialysis. PMID:21707699

Systematic Evaluation of the Efficacy of Chlorine Dioxide in Decontamination of Building Interior Surfaces Contaminated with Anthrax Spores▿

PubMed Central

Rastogi, Vipin K.; Ryan, Shawn P.; Wallace, Lalena; Smith, Lisa S.; Shah, Saumil S.; Martin, G. Blair

2010-01-01

Efficacy of chlorine dioxide (CD) gas generated by two distinct generation systems, Sabre (wet system with gas generated in water) and ClorDiSys (dry system with gas generated in air), was evaluated for inactivation of Bacillus anthracis spores on six building interior surfaces. The six building materials included carpet, acoustic ceiling tile, unpainted cinder block, painted I-beam steel, painted wallboard, and unpainted pinewood. There was no statistically significant difference in the data due to the CD generation technology at a 95% confidence level. Note that a common method of CD gas measurement was used for both wet and dry CD generation types. Doses generated by combinations of different concentrations of CD gas (500, 1,000, 1,500, or 3,000 parts per million of volume [ppmv]) and exposure times (ranging between 0.5 and 12 h) were used to evaluate the relative role of fumigant exposure period and total dose in the decontamination of building surfaces. The results showed that the time required to achieve at least a 6-log reduction in viable spores is clearly a function of the material type on which the spores are inoculated. The wood and cinder block coupons required a longer exposure time to achieve a 6-log reduction. The only material showing a clear statistical difference in rate of decay of viable spores as a function of concentration was cinder block. For all other materials, the profile of spore kill (i.e., change in number of viable spores with exposure time) was not dependent upon fumigant concentration (500 to 3,000 ppmv). The CD dose required for complete spore kill on biological indicators (typically, 1E6 spores of Bacillus atrophaeus on stainless steel) was significantly less than that required for decontamination of most of the building materials tested. PMID:20305025

Systematic evaluation of the efficacy of chlorine dioxide in decontamination of building interior surfaces contaminated with anthrax spores.

PubMed

Rastogi, Vipin K; Ryan, Shawn P; Wallace, Lalena; Smith, Lisa S; Shah, Saumil S; Martin, G Blair

2010-05-01

Efficacy of chlorine dioxide (CD) gas generated by two distinct generation systems, Sabre (wet system with gas generated in water) and ClorDiSys (dry system with gas generated in air), was evaluated for inactivation of Bacillus anthracis spores on six building interior surfaces. The six building materials included carpet, acoustic ceiling tile, unpainted cinder block, painted I-beam steel, painted wallboard, and unpainted pinewood. There was no statistically significant difference in the data due to the CD generation technology at a 95% confidence level. Note that a common method of CD gas measurement was used for both wet and dry CD generation types. Doses generated by combinations of different concentrations of CD gas (500, 1,000, 1,500, or 3,000 parts per million of volume [ppmv]) and exposure times (ranging between 0.5 and 12 h) were used to evaluate the relative role of fumigant exposure period and total dose in the decontamination of building surfaces. The results showed that the time required to achieve at least a 6-log reduction in viable spores is clearly a function of the material type on which the spores are inoculated. The wood and cinder block coupons required a longer exposure time to achieve a 6-log reduction. The only material showing a clear statistical difference in rate of decay of viable spores as a function of concentration was cinder block. For all other materials, the profile of spore kill (i.e., change in number of viable spores with exposure time) was not dependent upon fumigant concentration (500 to 3,000 ppmv). The CD dose required for complete spore kill on biological indicators (typically, 1E6 spores of Bacillus atrophaeus on stainless steel) was significantly less than that required for decontamination of most of the building materials tested.

Effective Crew Operations: An Analysis of Technologies for Improving Crew Activities and Medical Procedures

NASA Technical Reports Server (NTRS)

Harvey, Craig

2005-01-01

NASA's vision for space exploration (February 2004) calls for development of a new crew exploration vehicle, sustained lunar operations, and human exploration of Mars. To meet the challenges of planned sustained operations as well as the limited communications between Earth and the crew (e.g., Mars exploration), many systems will require crews to operate in an autonomous environment. It has been estimated that once every 2.4 years a major medical issue will occur while in space. NASA's future travels, especially to Mars, will begin to push this timeframe. Therefore, now is the time for investigating technologies and systems that will support crews in these environments. Therefore, this summer two studies were conducted to evaluate the technology and systems that may be used by crews in future missions. The first study evaluated three commercial Indoor Positioning Systems (IPS) (Versus, Ekahau, and Radianse) that can track equipment and people within a facility. While similar to Global Positioning Systems (GPS), the specific technology used is different. Several conclusions can be drawn from the evaluation conducted, but in summary it is clear that none of the systems provides a complete solution in meeting the tracking and technology integration requirements of NASA. From a functional performance (e.g., system meets user needs) evaluation perspective, Versus performed fairly well on all performance measures as compared to Ekahau and Radianse. However, the system only provides tracking at the room level. Thus, Versus does not provide the level of fidelity required for tracking assets or people for NASA requirements. From an engineering implementation perspective, Ekahau is far simpler to implement that the other two systems because of its wi-fi design (e.g., no required runs of cable). By looking at these two perspectives, one finds there was no clear system that met NASA requirements. Thus it would be premature to suggest that any of these systems are ready for implementation and further study is required.

Nursing Information Systems Requirements: A Milestone for Patient Outcome and Patient Safety Improvement.

PubMed

Farzandipour, Mehrdad; Meidani, Zahra; Riazi, Hossein; Sadeqi Jabali, Monireh

2016-12-01

Considering the integral role of understanding users' requirements in information system success, this research aimed to determine functional requirements of nursing information systems through a national survey. Delphi technique method was applied to conduct this study through three phases: focus group method modified Delphi technique and classic Delphi technique. A cross-sectional study was conducted to evaluate the proposed requirements within 15 general hospitals in Iran. Forty-three of 76 approved requirements were clinical, and 33 were administrative ones. Nurses' mean agreements for clinical requirements were higher than those of administrative requirements; minimum and maximum means of clinical requirements were 3.3 and 3.88, respectively. Minimum and maximum means of administrative requirements were 3.1 and 3.47, respectively. Research findings indicated that those information system requirements that support nurses in doing tasks including direct care, medicine prescription, patient treatment management, and patient safety have been the target of special attention. As nurses' requirements deal directly with patient outcome and patient safety, nursing information systems requirements should not only address automation but also nurses' tasks and work processes based on work analysis.

Comparative evaluation of antimicrobials for textile applications.

PubMed

Windler, Lena; Height, Murray; Nowack, Bernd

2013-03-01

Many antimicrobial technologies are available for textiles. They may be used in many different textile applications to prevent the growth of microorganisms. Due to the biological activity of the antimicrobial compounds, the assessment of the safety of these substances is an ongoing subject of research and regulatory scrutiny. This review aims to give an overview on the main compounds used today for antimicrobial textile functionalization. Based on an evaluation of scientific publications, market data as well as regulatory documents, the potential effects of antimicrobials on the environment and on human health were considered and also life cycle perspectives were taken into account. The characteristics of each compound were summarized according to technical, environmental and human health criteria. Triclosan, silane quaternary ammonium compounds, zinc pyrithione and silver-based compounds are the main antimicrobials used in textiles. The synthetic organic compounds dominate the antimicrobials market on a weight basis. On the technical side the application rates of the antimicrobials used to functionalize a textile product are an important parameter with treatments requiring lower dosage rates offering clear benefits in terms of less active substance required to achieve the functionality. The durability of the antimicrobial treatment has a strong influence on the potential for release and subsequent environmental effects. In terms of environmental criteria, all compounds were rated similarly in effective removal in wastewater treatment processes. The extent of published information about environmental behavior for each compound varies, limiting the possibility for an in-depth comparison of all textile-relevant parameters across the antimicrobials. Nevertheless the comparative evaluation showed that each antimicrobial technology has specific risks and benefits that should be taken into account in evaluating the suitability of different antimicrobial products. The results also indicated that nanoscale silver and silver salts that achieve functionality with very low application rates offer clear potential benefits for textile use. The regular care of textiles consumes lots of resources (e.g. water, energy, chemicals) and antimicrobial treatments can play a role in reducing the frequency and/or intensity of laundering which can give potential for significant resource savings and associated impact on the environment. Copyright © 2013 Elsevier Ltd. All rights reserved.

Functional categories for future flight deck designs

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1993-01-01

With the addition of each new system on the flight deck, the danger of increasing overall operator workload while reducing crew understanding of critical mission information exists. The introduction of more powerful onboard computers, larger databases, and the increased use of electronic display media may lead to a situation of flight deck 'sophistication' at the expense of losses in flight crew capabilities and situational awareness. To counter this potentially negative impact of new technology, research activities are underway to reassess the flight deck design process. The fundamental premise of these activities is that a human-centered, systems-oriented approach to the development of advanced civil aircraft flight decks will be required for future designs to remain ergonomically sound and economically competitive. One of the initial steps in an integrated flight deck process is to define the primary flight deck functions needed to support the mission goals of the vehicle. This would allow the design team to evaluate candidate concepts in relation to their effectiveness in meeting the functional requirements. In addition, this would provide a framework to aid in categorizing and bookkeeping all of the activities that are required to be performed on the flight deck, not just activities of the crew or of a specific system. This could then allow for a better understanding and allocation of activities in the design, an understanding of the impact of a specific system on overall system performance, and an awareness of the total crew performance requirements for the design. One candidate set of functional categories that could be used to guide an advanced flight deck design are described.

Performance Evaluation of a Lower Limb Exoskeleton for Stair Ascent and Descent with Paraplegia*

PubMed Central

Farris, Ryan J.; Quintero, Hugo A.; Goldfarb, Michael

2013-01-01

This paper describes the application of a powered lower limb exoskeleton to aid paraplegic individuals in stair ascent and descent. A brief description of the exoskeleton hardware is provided along with an explanation of the control methodology implemented to allow stair ascent and descent. Tests were performed with a paraplegic individual (T10 complete injury level) and data is presented from multiple trials, including the hip and knee joint torque and power required to perform this functionality. Joint torque and power requirements are summarized, including peak hip and knee joint torque requirements of 0.75 Nm/kg and 0.87 Nm/kg, respectively, and peak hip and knee joint power requirements of approximately 0.65 W/kg and 0.85 W/kg, respectively. PMID:23366287

A Comparison Study of Single-Parent Families Living on Remote, Rural Islands and in Urban Settings in Japan.

PubMed

Hiratani, Yuko; Hohashi, Naohiro

2016-06-01

Nursing interventions that aim to enhance the family environment are necessary to help single-parent families with children to improve family functioning. The cultural and social factors that are unique to Japan's remote islands should be considered to assess the influence of this unique setting on family functioning. The objectives of this study were to evaluate the family functioning of child-rearing single-parent families living in different environments and to investigate the association between family demographics and family functioning. A self-administered questionnaire, the Japanese version of the Survey of Family Environment, was used to evaluate the sufficiency of family functioning. The participants were families with children enrolled in nurseries and kindergartens who were either living in remote, rural islands or in an urban city on the mainland in Japan. Family functioning was significantly higher for single-parent families living on the islands than for those living in the city in terms of media use, participation in community activities, and the collaboration of family members in child-rearing. Family functioning of single-parent families correlated significantly with household income, the parent's gender, family members' health, and family life cycle. Single-parent families living on Japanese offshore islands maintained family functioning through mutual support and the effective use of information technology. Nevertheless, single-parent families require additional support to improve their healthcare and financial situations.

Evaluation of soy hulls as a potential ingredient of functional foods for the prevention of obesity.

PubMed

Olguin, María Catalina; Posadas, Marta Delia; Revelant, Gilda Celina; Labourdette, Verónica Beatriz; Elías, Héctor Daniel; Venezia, María Rosa

2010-01-01

The prevalence of obesity and its associated health problems is rising to epidemic proportions throughout the world. Soy hulls, an industrial waste from oil extraction, contain a high proportion of fiber--soluble and insoluble--and may be a potential ingredient of functional foods for the prevention of obesity. However, crude soybeans, as do all legumes, present challenges to their use because of intensive antitrypsin and antichimotrypsin activity that impairs normal growth in humans and other mammals, requiring inactivation. To evaluate possible antinutritional effects of soybean hulls, diets with 10 percent fiber from soybean hulls or cellulose were offered to weanling IIMb/Beta obese rats during their prepubertal timeframe. The fact that no significant differences were found in growth, blood parameters nor in fat depots' weight and lipid content plus the proven beneficial effects on obese adult rats suggest that soy hulls may be a useful ingredient of functional foods for the prevention and treatment of human obesity. Copyright © Taylor & Francis Group, LLC

Measuring multi-configurational character by orbital entanglement

NASA Astrophysics Data System (ADS)

Stein, Christopher J.; Reiher, Markus

2017-09-01

One of the most critical tasks at the very beginning of a quantum chemical investigation is the choice of either a multi- or single-configurational method. Naturally, many proposals exist to define a suitable diagnostic of the multi-configurational character for various types of wave functions in order to assist this crucial decision. Here, we present a new orbital-entanglement-based multi-configurational diagnostic termed Zs(1). The correspondence of orbital entanglement and static (or non-dynamic) electron correlation permits the definition of such a diagnostic. We chose our diagnostic to meet important requirements such as well-defined limits for pure single-configurational and multi-configurational wave functions. The Zs(1) diagnostic can be evaluated from a partially converged, but qualitatively correct, and therefore inexpensive density matrix renormalisation group wave function as in our recently presented automated active orbital selection protocol. Its robustness and the fact that it can be evaluated at low cost make this diagnostic a practical tool for routine applications.

Inhibition of Lateral Prefrontal Cortex Produces Emotionally Biased First Impressions: A Transcranial Magnetic Stimulation and Electroencephalography Study.

PubMed

Lapate, Regina C; Samaha, Jason; Rokers, Bas; Hamzah, Hamdi; Postle, Bradley R; Davidson, Richard J

2017-07-01

Optimal functioning in everyday life requires the ability to override reflexive emotional responses and prevent affective spillover to situations or people unrelated to the source of emotion. In the current study, we investigated whether the lateral prefrontal cortex (lPFC) causally regulates the influence of emotional information on subsequent judgments. We disrupted left lPFC function using transcranial magnetic stimulation (TMS) and recorded electroencephalography (EEG) before and after. Subjects evaluated the likeability of novel neutral faces after a brief exposure to a happy or fearful face. We found that lPFC inhibition biased evaluations of novel faces according to the previously processed emotional expression. Greater frontal EEG alpha power, reflecting increased inhibition by TMS, predicted increased behavioral bias. TMS-induced affective misattribution was long-lasting: Emotionally biased first impressions formed during lPFC inhibition were still detectable outside of the laboratory 3 days later. These findings indicate that lPFC serves an important emotion-regulation function by preventing incidental emotional encoding from automatically biasing subsequent appraisals.

Optimal design of solidification processes

NASA Technical Reports Server (NTRS)

Dantzig, Jonathan A.; Tortorelli, Daniel A.

1991-01-01

An optimal design algorithm is presented for the analysis of general solidification processes, and is demonstrated for the growth of GaAs crystals in a Bridgman furnace. The system is optimal in the sense that the prespecified temperature distribution in the solidifying materials is obtained to maximize product quality. The optimization uses traditional numerical programming techniques which require the evaluation of cost and constraint functions and their sensitivities. The finite element method is incorporated to analyze the crystal solidification problem, evaluate the cost and constraint functions, and compute the sensitivities. These techniques are demonstrated in the crystal growth application by determining an optimal furnace wall temperature distribution to obtain the desired temperature profile in the crystal, and hence to maximize the crystal's quality. Several numerical optimization algorithms are studied to determine the proper convergence criteria, effective 1-D search strategies, appropriate forms of the cost and constraint functions, etc. In particular, we incorporate the conjugate gradient and quasi-Newton methods for unconstrained problems. The efficiency and effectiveness of each algorithm is presented in the example problem.

Global positioning system for general aviation: Joint FAA-NASA Seminar. [conferences

NASA Technical Reports Server (NTRS)

1978-01-01

Programs to examine and develop means to utilize the global positioning system (GPS) for civil aviation functions are described. User requirements in this regard are discussed, the development of technologies in the areas of antennas, receivers, and signal processors for the GPS are examined, and modifications to the GPS to fit operational and design criteria are evaluated.

Medical Services: Standards of Medical Fitness

DTIC Science & Technology

2002-03-28

Malfunction of the acoustic nerve. (Evaluate functional impairment of hearing under para 3–10.) c. Mastoiditis, chronic, with constant drainage from the...mastoid cavity, requiring frequent and prolonged medical care. d. Mastoiditis, chronic, following mastoidectomy, with constant drainage from the...d. Nephrectomy, when after treatment, there is infection or pathology in the remaining kidney. e. Nephrostomy, if drainage persists. f. Oophorectomy

Biowaste resistojet propellant system, biological and functional analysis, task 1 and 2

NASA Technical Reports Server (NTRS)

1971-01-01

The influence of chemical contaminants in potential biowaste sources upon the design and interface requirements of a biowaste resistojet propulsion system for a space station and/or base are evaluated. Chemical contaminants are defined as all compounds present in biowaste other than carbon dioxide, water, and methane. The latter are the nominal effluent candidates for the biowaste resistojet.

Comparative ergonomic assessment of manual wheelchairs by paraplegic users.

PubMed

Gil-Agudo, Angel; Solís-Mozos, Marta; del-Ama, Antonio J; Crespo-Ruiz, Beatriz; de la Peña-González, Ana Isabel; Pérez-Nombela, Soraya

2013-07-01

The aim of the present study was to describe and test the reliability of a comprehensive product-centered approach to assessing functional performance and wheelchair user perceptions on device ergonomics and satisfaction of performance. A pilot study was implemented using this approach to evaluate differences among four manual wheelchairs. Six wheelchair users with complete spinal cord injury (SCI) at the thoracic level and with no previous upper limbs impairment were recruited for this study. After finishing circuit tasks, subjects were asked to complete a questionnaire about ergonomic wheelchair characteristics (manoeuvrability, stability, comfort and ease of propulsion) and satisfaction about task performance. On the other hand, objective data were recorded during user performance as the time required to complete each test, kinetic wheelchair propulsion data obtained with two SMARTWheels® and physiological parameters (heart rate and physiological index). Kuschall Champion® and Otto Bock Voyage® wheelchairs were ranked best for most ergonomic aspects specially in manoeuvrability (p < 0.05). Less time was required to execute most of the circuit tasks in both wheelchair models (p < 0.05). This approach proposed highlight the importance of looking both kinds of information, user perception and user functional performance when evaluating a wheelchair or comparing across devices.

Assessment of maternal health care quality: conceptual and methodologic issues.

PubMed

Lane, D S; Kelman, H R

1975-10-01

Past efforts in assessment of the quality of maternity care have been analyzed in order to develop an evaluation framework that will have utility and applicability beyond a specific program, population, or health discipline. Presently available evaluation approaches have focused attention on either "high risk" populations or upon women experiencing a complicated pregnancy or delivery. Quality has been defined as the extent to which normative or empirically derived standards of obstetrical care have been applied. An alternative approach is suggested which conceives of the pregnancy as a normal physiological event but with the potentiality of either causing or exacerbating social or health problems. Maternity care quality is viewed as the application of those necessary health and health-related services that are required to safeguard the health of the mother and offspring, minimize the noxious consequences of pre-existing or concurrent health hazards or conditions, and upgrade the health and social functioning of those women who require it. Additionally, the system of services should be functionally organized to optimize care. Indicators of quality are suggested which incorporate structural, process, and outcome variables, and which link medical and consumer criteria in a comprehensive community level approach to quality assessment.

Radial extracorporeal shockwave therapy for the treatment of finger tenosynovitis (trigger digit)

PubMed Central

Malliaropoulos, Nikos; Jury, Rosanna; Pyne, Debasish; Padhiar, Nat; Turner, Jennifer; Korakakis, Vasileios; Meke, Maria; Lohrer, Heinz

2016-01-01

Introduction Stenosing tenosynovitis that is characterized by the inability to flex the digit smoothly, usually leads to prolonged rehabilitation or surgery. Study design This case series is a retrospective cohort study. Purpose The aim of this case series was to evaluate the effectiveness of radial extracorporeal shockwave therapy (rESWT) for the treatment of stenosing tenosynovitis of the digital flexor tendon (trigger digit). Methods A retrospective analysis of 44 patients (49 fingers) treated with an individually adapted rESWT protocol was conducted. Trigger digit pain and function were evaluated at baseline and 1-, 3-, and 12-months posttreatment. Recurrence and pretreatment symptom duration were analyzed. Results Significant reductions in pain scores and functional improvement were found between baseline and all follow-up assessments (P<0.001). Pretreatment symptom duration was significantly correlated with the number of rESWT sessions required (r=0.776, P<0.001) and 1-year posttreatment pain score (r=0.335, P=0.019). Conclusion This study provides initial evidence that rESWT is an effective treatment for trigger digit, but randomised controlled trials are required to provide further evidence of this effect. PMID:27843364

Preparation and performance evaluation of epoxy-based heat reflective coating for the pavement

NASA Astrophysics Data System (ADS)

Hu, B.; Liang, Y. H.; Guo, L. Y.; Jiang, T.

2017-04-01

According to the basic characteristics and composition of heat-reflective coating, combining with the functional requirements of road materials, the experiment selects the epoxy resin with good wear resistance and adhesive force as a film forming material, with TiO2, SiO2 and extinction powder as the main functional filler. The experiment gets a good formula with suitable viscosity, low glossiness and good cooling effect, optimizes by orthogonal experiment. The experiment evaluates the indoor and outdoor cooling effect of heat-reflective coating, and analyses the road performance of the coating. The results shows that the better heat-reflective coating formula included 12% of titanium dioxide, 4% of silica and 4% of extinction powder. When the dosage of coating is 0.8kg/m2, the indoor specimen of heat-reflective coating decrease the temperature of 12 ˜ 14°C, and the specimen under solar radiation can reduce the temperature of 7 ˜ 9°C. The pavement of heat-reflective coating has good wear resistance, but the road slip resistance partly declines. Therefore, it needs to add the anti-sliding particles to meet the safe driving requirements.

Image quality of a pixellated GaAs X-ray detector

NASA Astrophysics Data System (ADS)

Sun, G. C.; Makham, S.; Bourgoin, J. C.; Mauger, A.

2007-02-01

X-ray detection requires materials with large atomic numbers Z in order to absorb the radiation efficiently. In case of X-ray imaging, fluorescence is a limiting factor for the spatial resolution and contrast at energies above the kα threshold. Since both the energy and yield of the fluorescence of a given material increase with the atomic number, there is an optimum value of Z. GaAs, which can now be epitaxially grown as self-supported thick layers to fulfil the requirements for imaging (good homogeneity of the electronic properties) corresponds to this optimum. Image performances obtained with this material are evaluated in terms of line spread function and modulation transfer function, and a comparison with CsI is made. We evaluate the image contrast obtained for a given object contrast with GaAs and CsI detectors, in the photon energy range of medical applications. Finally, we discuss the minimum object size, which can be detected by these detectors in of mammography conditions. This demonstrates that an object of a given size can be detected using a GaAs detector with a dose at least 100 times lower than using a CsI detector.

Efficient evaluation of the material response of tissues reinforced by statistically oriented fibres

NASA Astrophysics Data System (ADS)

Hashlamoun, Kotaybah; Grillo, Alfio; Federico, Salvatore

2016-10-01

For several classes of soft biological tissues, modelling complexity is in part due to the arrangement of the collagen fibres. In general, the arrangement of the fibres can be described by defining, at each point in the tissue, the structure tensor (i.e. the tensor product of the unit vector of the local fibre arrangement by itself) and a probability distribution of orientation. In this approach, assuming that the fibres do not interact with each other, the overall contribution of the collagen fibres to a given mechanical property of the tissue can be estimated by means of an averaging integral of the constitutive function describing the mechanical property at study over the set of all possible directions in space. Except for the particular case of fibre constitutive functions that are polynomial in the transversely isotropic invariants of the deformation, the averaging integral cannot be evaluated directly, in a single calculation because, in general, the integrand depends both on deformation and on fibre orientation in a non-separable way. The problem is thus, in a sense, analogous to that of solving the integral of a function of two variables, which cannot be split up into the product of two functions, each depending only on one of the variables. Although numerical schemes can be used to evaluate the integral at each deformation increment, this is computationally expensive. With the purpose of containing computational costs, this work proposes approximation methods that are based on the direct integrability of polynomial functions and that do not require the step-by-step evaluation of the averaging integrals. Three different methods are proposed: (a) a Taylor expansion of the fibre constitutive function in the transversely isotropic invariants of the deformation; (b) a Taylor expansion of the fibre constitutive function in the structure tensor; (c) for the case of a fibre constitutive function having a polynomial argument, an approximation in which the directional average of the constitutive function is replaced by the constitutive function evaluated at the directional average of the argument. Each of the proposed methods approximates the averaged constitutive function in such a way that it is multiplicatively decomposed into the product of a function of the deformation only and a function of the structure tensors only. In order to assess the accuracy of these methods, we evaluate the constitutive functions of the elastic potential and the Cauchy stress, for a biaxial test, under different conditions, i.e. different fibre distributions and different ratios of the nominal strains in the two directions. The results are then compared against those obtained for an averaging method available in the literature, as well as against the integration made at each increment of deformation.

Self-actuated shutdown-system development: system response-analysis status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deane, N.A.; Gregoire, K.E.; Tatsumi, J.T.

1980-09-01

This report provides a preliminary evaluation of the SASS response time requirements for the safe shutdown earthquake (SSE), the flow coastdown (FCD), and two transient overpower (TOP) events. The driving functions for the SSE are a 20 cent step reactivity insertion with a +- 60 cent oscillation super imposed for 10 seconds combined with a flow coastdown defined by F/F/sub (0)/ = 1/(1+.2788t). The driving function of the FCD is just the relative flow curve defined above for the SSE. The TOP event driving function represents a control rod runout to a total of 60 cents at ramp rates ofmore » .76 cents/s and 6.1 cents/s. 3 figures.« less

Anxiety Levels Are Independently Associated With Cognitive Performance in an Australian Multiple Sclerosis Patient Cohort.

PubMed

Ribbons, Karen; Lea, Rodney; Schofield, Peter W; Lechner-Scott, Jeannette

2017-01-01

Neurological and psychological symptoms in multiple sclerosis can affect cognitive function. The objective of this study was to explore the relationship between psychological measures and cognitive performance in a patient cohort. In 322 multiple sclerosis patients, psychological symptoms were measured using the Depression Anxiety and Stress Scale, and cognitive function was evaluated using Audio Recorded Cognitive Screen. Multifactor linear regression analysis, accounting for all clinical covariates, found that anxiety was the only psychological measure to remain a significant predictor of cognitive performance (p<0.001), particularly memory function (p<0.001). Further prospective studies are required to determine whether treatment of anxiety improves cognitive impairment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goltz, G.; Weiner, H.

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U. S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document provides all the information necessary tomore » access the DSPA programs, to input required data and to generate appropriate Design Synthesis or Performance Analysis Output.« less

[Relationship between the swallowing function and the health-related QOL among community-dwelling dependent elderly persons].

PubMed

Morisaki, Naoko; Miura, Hiroko; Moriya, Shingo; Hara, Shuichi

2014-01-01

We examined the relationship between the swallowing function and the health-related QOL (quality of life) among community-dwelling dependent elderly persons. The subjects included 191 community-dwelling dependent elderly persons. Data were collected via questionnaires, including information regarding age, gender, the level of care required, post-cerebrovascular disease, the health-related QOL and the swallowing function. We used the SF-8 to measure the health-related QOL and the DRACE (Dysphagia Risk Assessment for the Community-dwelling Elderly) to evaluate the swallowing function. The average DRACE score was 4.29±3.81. In addition, the swallowing risk was found to be related to the SF (social functioning) and MH (mental health) subscales of the SF-8. Our results suggest that the swallowing function is significantly related to the health-related QOL among community-dwelling dependent elderly persons.

New frontiers: discovering cilia-independent functions of cilia proteins.

PubMed

Vertii, Anastassiia; Bright, Alison; Delaval, Benedicte; Hehnly, Heidi; Doxsey, Stephen

2015-10-01

In most vertebrates, mitotic spindles and primary cilia arise from a common origin, the centrosome. In non-cycling cells, the centrosome is the template for primary cilia assembly and, thus, is crucial for their associated sensory and signaling functions. During mitosis, the duplicated centrosomes mature into spindle poles, which orchestrate mitotic spindle assembly, chromosome segregation, and orientation of the cell division axis. Intriguingly, both cilia and spindle poles are centrosome-based, functionally distinct structures that require the action of microtubule-mediated, motor-driven transport for their assembly. Cilia proteins have been found at non-cilia sites, where they have distinct functions, illustrating a diverse and growing list of cellular processes and structures that utilize cilia proteins for crucial functions. In this review, we discuss cilia-independent functions of cilia proteins and re-evaluate their potential contributions to "cilia" disorders. © 2015 The Authors.

An efficient method for hybrid density functional calculation with spin-orbit coupling

NASA Astrophysics Data System (ADS)

Wang, Maoyuan; Liu, Gui-Bin; Guo, Hong; Yao, Yugui

2018-03-01

In first-principles calculations, hybrid functional is often used to improve accuracy from local exchange correlation functionals. A drawback is that evaluating the hybrid functional needs significantly more computing effort. When spin-orbit coupling (SOC) is taken into account, the non-collinear spin structure increases computing effort by at least eight times. As a result, hybrid functional calculations with SOC are intractable in most cases. In this paper, we present an approximate solution to this problem by developing an efficient method based on a mixed linear combination of atomic orbital (LCAO) scheme. We demonstrate the power of this method using several examples and we show that the results compare very well with those of direct hybrid functional calculations with SOC, yet the method only requires a computing effort similar to that without SOC. The presented technique provides a good balance between computing efficiency and accuracy, and it can be extended to magnetic materials.

Mechanical and biological properties of the micro-/nano-grain functionally graded hydroxyapatite bioceramics for bone tissue engineering.

PubMed

Zhou, Changchun; Deng, Congying; Chen, Xuening; Zhao, Xiufen; Chen, Ying; Fan, Yujiang; Zhang, Xingdong

2015-08-01

Functionally graded materials (FGM) open the promising approach for bone tissue repair. In this study, a novel functionally graded hydroxyapatite (HA) bioceramic with micrograin and nanograin structure was fabricated. Its mechanical properties were tailored by composition of micrograin and nanograin. The dynamic mechanical analysis (DMA) indicated that the graded HA ceramics had similar mechanical property compared to natural bones. Their cytocompatibility was evaluated via fluorescent microscopy and MTT colorimetric assay. The viability and proliferation of rabbit bone marrow mesenchymal stem cells (BMSCs) on ceramics indicated that this functionally graded HA ceramic had better cytocompatibility than conventional HA ceramic. This study demonstrated that functionally graded HA ceramics create suitable structures to satisfy both the mechanical and biological requirements of bone tissues. Copyright © 2015 Elsevier Ltd. All rights reserved.

Localized basis functions and other computational improvements in variational nonorthogonal basis function methods for quantum mechanical scattering problems involving chemical reactions

NASA Technical Reports Server (NTRS)

Schwenke, David W.; Truhlar, Donald G.

1990-01-01

The Generalized Newton Variational Principle for 3D quantum mechanical reactive scattering is briefly reviewed. Then three techniques are described which improve the efficiency of the computations. First, the fact that the Hamiltonian is Hermitian is used to reduce the number of integrals computed, and then the properties of localized basis functions are exploited in order to eliminate redundant work in the integral evaluation. A new type of localized basis function with desirable properties is suggested. It is shown how partitioned matrices can be used with localized basis functions to reduce the amount of work required to handle the complex boundary conditions. The new techniques do not introduce any approximations into the calculations, so they may be used to obtain converged solutions of the Schroedinger equation.

Systems engineering and integration: Cost estimation and benefits analysis

NASA Technical Reports Server (NTRS)

Dean, ED; Fridge, Ernie; Hamaker, Joe

1990-01-01

Space Transportation Avionics hardware and software cost has traditionally been estimated in Phase A and B using cost techniques which predict cost as a function of various cost predictive variables such as weight, lines of code, functions to be performed, quantities of test hardware, quantities of flight hardware, design and development heritage, complexity, etc. The output of such analyses has been life cycle costs, economic benefits and related data. The major objectives of Cost Estimation and Benefits analysis are twofold: (1) to play a role in the evaluation of potential new space transportation avionics technologies, and (2) to benefit from emerging technological innovations. Both aspects of cost estimation and technology are discussed here. The role of cost analysis in the evaluation of potential technologies should be one of offering additional quantitative and qualitative information to aid decision-making. The cost analyses process needs to be fully integrated into the design process in such a way that cost trades, optimizations and sensitivities are understood. Current hardware cost models tend to primarily use weights, functional specifications, quantities, design heritage and complexity as metrics to predict cost. Software models mostly use functionality, volume of code, heritage and complexity as cost descriptive variables. Basic research needs to be initiated to develop metrics more responsive to the trades which are required for future launch vehicle avionics systems. These would include cost estimating capabilities that are sensitive to technological innovations such as improved materials and fabrication processes, computer aided design and manufacturing, self checkout and many others. In addition to basic cost estimating improvements, the process must be sensitive to the fact that no cost estimate can be quoted without also quoting a confidence associated with the estimate. In order to achieve this, better cost risk evaluation techniques are needed as well as improved usage of risk data by decision-makers. More and better ways to display and communicate cost and cost risk to management are required.

GPU-based Green’s function simulations of shear waves generated by an applied acoustic radiation force in elastic and viscoelastic models

NASA Astrophysics Data System (ADS)

Yang, Yiqun; Urban, Matthew W.; McGough, Robert J.

2018-05-01

Shear wave calculations induced by an acoustic radiation force are very time-consuming on desktop computers, and high-performance graphics processing units (GPUs) achieve dramatic reductions in the computation time for these simulations. The acoustic radiation force is calculated using the fast near field method and the angular spectrum approach, and then the shear waves are calculated in parallel with Green’s functions on a GPU. This combination enables rapid evaluation of shear waves for push beams with different spatial samplings and for apertures with different f/#. Relative to shear wave simulations that evaluate the same algorithm on an Intel i7 desktop computer, a high performance nVidia GPU reduces the time required for these calculations by a factor of 45 and 700 when applied to elastic and viscoelastic shear wave simulation models, respectively. These GPU-accelerated simulations also compared to measurements in different viscoelastic phantoms, and the results are similar. For parametric evaluations and for comparisons with measured shear wave data, shear wave simulations with the Green’s function approach are ideally suited for high-performance GPUs.

Effect of virtual reality-based rehabilitation on upper-extremity function in patients with brain tumor: controlled trial.

PubMed

Yoon, Jisun; Chun, Min Ho; Lee, Sook Joung; Kim, Bo Ryun

2015-06-01

The aim of this study was to evaluate the benefit of virtual reality-based rehabilitation on upper-extremity function in patients with brain tumor. Patients with upper-extremity dysfunction were divided into age-matched and tumor type-matched two groups. The intervention group performed the virtual reality program 30 mins per session for 9 sessions and conventional occupational therapy 30 mins per session for 6 sessions for 3 wks, whereas the control group received conventional occupational therapy alone 30 mins per session for 15 sessions for 3 wks. The Box and Block test, the Manual Function test, and the Fugl-Meyer scale were used to evaluate upper-extremity function. The Korean version of the Modified Barthel Index was used to assess activities of daily living. Forty patients completed the study (20 for each group). Each group exhibited significant posttreatment improvements in the Box and Block test, Manual Function test, Fugl-Meyer scale, and Korean version of the Modified Barthel Index scores. The Box and Block test, the Fugl-Meyer scale, and the Manual Function test showed greater improvements in shoulder/elbow/forearm function in the intervention group and hand function in the control group. Virtual reality-based rehabilitation combined with conventional occupational therapy may be more effective than conventional occupational therapy, especially for proximal upper-extremity function in patients with brain tumor. Further studies considering hand function, such as use of virtual reality programs that targeting hand use, are required.

Neurocognitive Function and Health-Related Quality of Life in Pediatric Korean Survivors of Medulloblastoma.

PubMed

Yoo, Hee Jung; Kim, Hyery; Park, Hyeon Jin; Kim, Dong Seok; Ra, Young Shin; Shin, Hee Young

2016-11-01

The neurocognitive function and quality of life of 58 Korean survivors of childhood medulloblastoma were assessed after surgery, cranial radiation and chemotherapy. All patients were evaluated with a battery of neurocognitive function tests and the Pediatric Functional Assessment of Cancer Therapy-Brain Tumor Survivors, which consists of self-report questionnaires on quality of life. The mean full-scale intelligence quotient (IQ), verbal IQ, and performance IQ scores were 90.2, 97.1, and 84.16, respectively. The mean memory quotient (MQ) score was 86.78, which was within 1 standard deviation of the average score of 100. Processing speed, attention, and executive function showed mild to moderate deficits. Intelligence, memory, executive function, visuospatial function, and simple motor function were significantly lower in the patients diagnosed before 8 years of age compared with those diagnosed after 8. The cognitive deficits in the patients diagnosed at younger ages might be related to earlier exposure to craniospinal irradiation and chemotherapy. The patient and parent proxy evaluations of attention, fine motor function, and quality of life did not differ. We found significant neurocognitive changes in a wide range of neurocognitive functional domains in Korean survivors of childhood medulloblastoma. Long-term follow-up studies of survivors of childhood medulloblastoma beginning at the time of their first diagnosis are required to better understand the deficits exhibited by survivors of childhood medulloblastoma, so that intervention strategies and treatment refinements that reduce the long-term neurocognitive decline can be developed.

A problem-solving task specialized for functional neuroimaging: validation of the Scarborough adaptation of the Tower of London (S-TOL) using near-infrared spectroscopy

PubMed Central

Ruocco, Anthony C.; Rodrigo, Achala H.; Lam, Jaeger; Di Domenico, Stefano I.; Graves, Bryanna; Ayaz, Hasan

2014-01-01

Problem-solving is an executive function subserved by a network of neural structures of which the dorsolateral prefrontal cortex (DLPFC) is central. Whereas several studies have evaluated the role of the DLPFC in problem-solving, few standardized tasks have been developed specifically for use with functional neuroimaging. The current study adapted a measure with established validity for the assessment of problem-solving abilities to design a test more suitable for functional neuroimaging protocols. The Scarborough adaptation of the Tower of London (S-TOL) was administered to 38 healthy adults while hemodynamic oxygenation of the PFC was measured using 16-channel continuous-wave functional near-infrared spectroscopy (fNIRS). Compared to a baseline condition, problems that required two or three steps to achieve a goal configuration were associated with higher activation in the left DLPFC and deactivation in the medial PFC. Individuals scoring higher in trait deliberation showed consistently higher activation in the left DLPFC regardless of task difficulty, whereas individuals lower in this trait displayed less activation when solving simple problems. Based on these results, the S-TOL may serve as a standardized task to evaluate problem-solving abilities in functional neuroimaging studies. PMID:24734017

Response functions for neutron skyshine analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gui, A.A.; Shultis, J.K.; Faw, R.E.

1997-02-01

Neutron and associated secondary photon line-beam response functions (LBRFs) for point monodirectional neutron sources are generated using the MCNP Monte Carlo code for use in neutron skyshine analysis employing the integral line-beam method. The LBRFs are evaluated at 14 neutron source energies ranging from 0.01 to 14 MeV and at 18 emission angles from 1 to 170 deg, as measured from the source-to-detector axis. The neutron and associated secondary photon conical-beam response functions (CBRFs) for azimuthally symmetric neutron sources are also evaluated at 13 neutron source energies in the same energy range and at 13 polar angles of source collimationmore » from 1 to 89 deg. The response functions are approximated by an empirical three-parameter function of the source-to-detector distance. These response function approximations are available for a source-to-detector distance up to 2,500 m and, for the first time, give dose equivalent responses that are required for modern radiological assessments. For the CBRFs, ground correction factors for neutrons and secondary photons are calculated and also approximated by empirical formulas for use in air-over-ground neutron skyshine problems with azimuthal symmetry. In addition, simple procedures are proposed for humidity and atmospheric density corrections.« less