Science.gov

Sample records for functionalized composite organic-inorganic

  1. Organic-Inorganic Composites Toward Biomaterial Application.

    PubMed

    Miyazaki, Toshiki; Sugawara-Narutaki, Ayae; Ohtsuki, Chikara

    2015-01-01

    Bioactive ceramics are known to exhibit specific biological affinities and are able to show direct integration with surrounding bone when implanted in bony defects. However, their inadequate mechanical properties, such as low fracture toughness and high Young's modulus in comparison to natural bone, limit their clinical application. Bone is a kind of organic-inorganic composite where apatite nanocrystals are precipitated onto collagen fibre networks. Thus, one way to address these problems is to mimic the natural composition of bone by using bioactive ceramics via material designs based on organic-inorganic composites. In this chapter, the current research on the development of the various organic-inorganic composites designed for biomaterial applications has been reviewed. Various compounds such as calcium phosphate, calcium sulphate and calcium carbonate can be used for the inorganic phases to design composites with the desired mechanical and biological properties of bone. Not only classical mechanical mixing but also coating of the inorganic phase in aqueous conditions is available for the fabrication of such composites. Organic modifications using various polymers enable the control of the crystalline structure of the calcium carbonate in the composites. These approaches on the fabrication of organic-inorganic composites provide important options for biomedical materials with novel functions. © 2015 S. Karger AG, Basel.

  2. Electron Microscopy Localization and Characterization of Functionalized Composite Organic-Inorganic SERS Nanoparticles on Leukemia Cells

    PubMed Central

    Koh, Ai Leen; Shachaf, Catherine M.; Elchuri, Sailaja; Nolan, Garry P.; Sinclair, Robert

    2008-01-01

    We demonstrate the use of electron microscopy as a powerful characterization tool to identify and locate antibody-conjugated composite organic-inorganic (COINs) surface enhanced Raman scattering (SERS) nanoparticles on cells. U937 leukemia cells labeled with antibody CD54-conjugated COINs were characterized in their native, hydrated state using wet Scanning Electron Microscopy (SEM) and in their dehydrated state using high-resolution SEM. In both cases, the backscattered electron detector (BSE) was used to detect and identify the silver constituents in COINs due to its high sensitivity to atomic number variations within a specimen. The imaging and analytical capabilities in the SEM were further complemented by higher resolution Transmission Electron Microscope (TEM) images and Scanning Auger Electron Spectroscopy (AES) data to give reliable and high-resolution information about nanoparticles and their binding to cell surface antigens. PMID:18995965

  3. Self-assembled hierarchically structured organic-inorganic composite systems.

    PubMed

    Tritschler, Ulrich; Cölfen, Helmut

    2016-05-13

    Designing bio-inspired, multifunctional organic-inorganic composite materials is one of the most popular current research objectives. Due to the high complexity of biocomposite structures found in nacre and bone, for example, a one-pot scalable and versatile synthesis approach addressing structural key features of biominerals and affording bio-inspired, multifunctional organic-inorganic composites with advanced physical properties is highly challenging. This article reviews recent progress in synthesizing organic-inorganic composite materials via various self-assembly techniques and in this context highlights a recently developed bio-inspired synthesis concept for the fabrication of hierarchically structured, organic-inorganic composite materials. This one-step self-organization concept based on simultaneous liquid crystal formation of anisotropic inorganic nanoparticles and a functional liquid crystalline polymer turned out to be simple, fast, scalable and versatile, leading to various (multi-)functional composite materials, which exhibit hierarchical structuring over several length scales. Consequently, this synthesis approach is relevant for further progress and scientific breakthrough in the research field of bio-inspired and biomimetic materials.

  4. A humidity sensing organic-inorganic composite for environmental monitoring.

    PubMed

    Ahmad, Zubair; Zafar, Qayyum; Sulaiman, Khaulah; Akram, Rizwan; Karimov, Khasan S

    2013-03-14

    In this paper, we present the effect of varying humidity levels on the electrical parameters and the multi frequency response of the electrical parameters of an organic-inorganic composite (PEPC+NiPc+Cu2O)-based humidity sensor. Silver thin films (thickness ~200 nm) were primarily deposited on plasma cleaned glass substrates by the physical vapor deposition (PVD) technique. A pair of rectangular silver electrodes was formed by patterning silver film through standard optical lithography technique. An active layer of organic-inorganic composite for humidity sensing was later spun coated to cover the separation between the silver electrodes. The electrical characterization of the sensor was performed as a function of relative humidity levels and frequency of the AC input signal. The sensor showed reversible changes in its capacitance with variations in humidity level. The maximum sensitivity ~31.6 pF/%RH at 100 Hz in capacitive mode of operation has been attained. The aim of this study was to increase the sensitivity of the previously reported humidity sensors using PEPC and NiPc, which has been successfully achieved.

  5. A Humidity Sensing Organic-Inorganic Composite for Environmental Monitoring

    PubMed Central

    Ahmad, Zubair; Zafar, Qayyum; Sulaiman, Khaulah; Akram, Rizwan; Karimov, Khasan S.

    2013-01-01

    In this paper, we present the effect of varying humidity levels on the electrical parameters and the multi frequency response of the electrical parameters of an organic-inorganic composite (PEPC+NiPc+Cu2O)-based humidity sensor. Silver thin films (thickness ∼200 nm) were primarily deposited on plasma cleaned glass substrates by the physical vapor deposition (PVD) technique. A pair of rectangular silver electrodes was formed by patterning silver film through standard optical lithography technique. An active layer of organic-inorganic composite for humidity sensing was later spun coated to cover the separation between the silver electrodes. The electrical characterization of the sensor was performed as a function of relative humidity levels and frequency of the AC input signal. The sensor showed reversible changes in its capacitance with variations in humidity level. The maximum sensitivity ∼31.6 pF/%RH at 100 Hz in capacitive mode of operation has been attained. The aim of this study was to increase the sensitivity of the previously reported humidity sensors using PEPC and NiPc, which has been successfully achieved. PMID:23493124

  6. Organic-inorganic composites designed for biomedical applications.

    PubMed

    Miyazaki, Toshiki; Ishikawa, Kunio; Shirosaki, Yuki; Ohtsuki, Chikara

    2013-01-01

    Several varieties of ceramics, such as Bioglass-type glasses, sintered hydroxyapatite and glass-ceramic A-W, exhibit specific biological affinity, i.e., direct bonding to surrounding bone, when implanted in bony defects. These bone-bonding ceramics are called bioactive ceramics and are utilized as important bone substitutes in the medical field. However, there is a limitation to their clinical applications because of their inappropriate mechanical properties. Natural bone takes a kind of organic-inorganic composite, where apatite nanocrystals are precipitated on collagen fibers. Therefore, problems with the bioactive ceramics can be solved by material design based on the composites. In this paper, current research topics on the development of bioactive organic-inorganic composites inspired by actual bone microstructure have been reviewed in correlation with preparation methods and various properties. Several kinds of inorganic components have been found to exhibit bioactivity in the body environment. Combination of the inorganic components with various organic polymers enables the development of bioactive organic-inorganic composites. In addition, novel biomedical applications of the composites to drug delivery systems, scaffolds for tissue regeneration and injectable biomaterials are available by combining drugs or biological molecules with appropriate control of its microstructure.

  7. Ion Dynamics in Organic-Inorganic Composite Superionic Conductor Glasses

    SciTech Connect

    Asayama, Ryo; Kuwata, Naoaki; Kawamura, Junichi

    2006-05-05

    Ionic conductivity of organic-inorganic composite superionic conductor glasses composed of AgI and alkylammoniumiodides is measured as a function of frequency, temperature and composition. A clear transition from insulator to superionic conductor is confirmed at the volume fraction {phi} of AgI is about 35 %. The dc component of the conductivity is fitted to the {sigma}{approx}({phi}-{phi}c){mu} with {phi}c=0.36, {mu}=2.5 for the present data. Near the percolation threshold, a power-law type frequency dependence of {omega}n (n{approx}0.67) is seen in mid frequency and {omega}1.0 at higher frequency corresponding to the constant loss region power-law is observed. The activation energies and preexponential factors derived from the temperature dependence increase from 0.3 to 0.7 eV approaching to the threshold. From these results, the ion dynamics in these glasses can be explained by the static site percolation theory at first approximation, but require the consideration on the chemical bond variation between the Ag and I modified by the organic ions.

  8. Organic/Inorganic Polymeric Composites for Heat-Transfer Reduction

    NASA Technical Reports Server (NTRS)

    Smith, Trent; Williams, Martha

    2008-01-01

    Organic/inorganic polymeric composite materials have been invented with significant reduction in heat-transfer properties. Measured decreases of 20-50 percent in thermal conductivity versus that of the unmodified polymer matrix have been attained. These novel composite materials also maintain mechanical properties of the unmodified polymer matrix. The present embodiments are applicable, but not limited to: racing applications, aerospace applications, textile industry, electronic applications, military hardware improvements, and even food service industries. One specific application of the polymeric composition is for use in tanks, pipes, valves, structural supports, and components for hot or cold fluid process systems where heat flow through materials is problematic and not desired. With respect to thermal conductivity and physical properties, these materials are superior alternatives to prior composite materials. These materials may prove useful as substitutes for metals in some cryogenic applications. A material of this type can be made from a blend of thermoplastics, elastomers, and appropriate additives and processed on normal polymer processing equipment. The resulting processed organic/inorganic composite can be made into fibers, molded, or otherwise processed into useable articles.

  9. AC electrophoretic deposition of organic-inorganic composite coatings.

    PubMed

    Yoshioka, T; Chávez-Valdez, A; Roether, J A; Schubert, D W; Boccaccini, A R

    2013-02-15

    Alternating current electrophoretic deposition (AC-EPD) of polyacrylic acid (PAA)-titanium oxide (TiO(2)) nanoparticle composites on stainless steel electrodes was investigated in basic aqueous solution. AC square wave with duty cycle of 80% was applied at a frequency of 1 kHz. FTIR-ATR spectra showed that both AC and direct current (DC) EPD successfully deposited PAA-TiO(2) composites. The deposition rate using AC-EPD was lower than that obtained in direct current DC-EPD. However, the microstructure and surface morphology of the deposited composite coatings were different depending on the type of electric field applied. AC-EPD applied for not more than 5 min led to smooth films without bubble formation, while DC-EPD for 1 min or more showed deposits with microstructural defects possibly as result of water electrolysis. AC-EPD was thus for the first time demonstrated to be a suitable technique to deposit organic-inorganic composite coatings from aqueous suspensions, showing that applying a square wave and frequency of 1 kHz leads to uniform PAA-TiO(2) composite coatings on conductive materials.

  10. Effects of asperities and organic-inorganic interactions on the strength of nacre-mimetic composites.

    PubMed

    Lee, Yoonjoo; Kim, Bo-Yeon; Shin, Dong-Geun; Kim, Soo-Ryong; Kwon, Woo-Teck; Kim, Younghee

    2017-02-01

    Nacre is a natural organic-inorganic hybrid composite, whose hierarchical structure has a complex influence on its high strength. Many structural features have been discovered, which influence the mechanical properties of nacre, and the authors have a particular interest in the role of the asperities and organic-inorganic interactions. In this study, a composite was prepared which mimics the asperity structure using clay minerals. Organic-inorganic bonding was induced with silane treatment. Both factors increased the yield strength of the composites; however, different deformation behavior was exhibited. It was found that asperities improved the strength of the composite, and that composition influences the stiffness of the composite. The organic-inorganic interaction between the resin and the other components of the composite reduced the deformation of the composite and consequently improved strength. Copyright © 2016. Published by Elsevier B.V.

  11. Sulfur-Containing Organic-Inorganic Hybrid Gel Compositions and Aerogels

    NASA Technical Reports Server (NTRS)

    Evans, Owen R. (Inventor); Dong, Wenting (Inventor); Deshpande, Kiranmayi (Inventor)

    2015-01-01

    Methods and materials are described for preparing organic-inorganic hybrid gel compositions where a sulfur-containing cross-linking agent covalently links the organic and inorganic components. The gel compositions are further dried to provide porous gel compositions and aerogels. The mechanical and thermal properties of the dried gel compositions are also disclosed.

  12. Tailoring bifunctional hybrid organic-inorganic nanoadsorbents by the choice of functional layer composition probed by adsorption of Cu(2+) ions.

    PubMed

    Tomina, Veronika V; Melnyk, Inna V; Zub, Yuriy L; Kareiva, Aivaras; Vaclavikova, Miroslava; Seisenbaeva, Gulaim A; Kessler, Vadim G

    2017-01-01

    Spherical silica particles with bifunctional (≡Si(CH2)3NH2/≡SiCH3, ≡Si(CH2)3NH2/≡Si(CH2)2(CF2)5CF3) surface layers were produced by a one-step approach using a modified Stöber method in three-component alkoxysilane systems, resulting in greatly increased contents of functional components. The content of functional groups and thermal stability of the surface layers were analyzed by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, and (13)C and (29)Si solid-state NMR spectroscopy revealing their composition and organization. The fine chemical structure of the surface in the produced hybrid adsorbent particles and the ligand distribution were further investigated by electron paramagnetic resonance (EPR) and electron spectroscopy of diffuse reflectance (ESDR) spectroscopy using Cu(2+) ion coordination as a probe. The composition and structure of the emerging surface complexes were determined and used to provide an insight into the molecular structure of the surfaces. It was demonstrated that the introduction of short hydrophobic (methyl) groups improves the kinetic characteristics of the samples during the sorption of copper(II) ions and promotes fixation of aminopropyl groups on the surface of silica microspheres. The introduction of long hydrophobic (perfluoroctyl) groups changes the nature of the surface, where they are arranged in alternately hydrophobic/hydrophilic patches. This makes the aminopropyl groups huddled and less active in the sorption of metal cations. The size and aggregation/morphology of obtained particles was optimized controlling the synthesis conditions, such as concentrations of reactants, basicity of the medium, and the process temperature.

  13. Biomineralization-inspired synthesis of functional organic/inorganic hybrid materials: organic molecular control of self-organization of hybrids.

    PubMed

    Arakaki, Atsushi; Shimizu, Katsuhiko; Oda, Mayumi; Sakamoto, Takeshi; Nishimura, Tatsuya; Kato, Takashi

    2015-01-28

    Organisms produce various organic/inorganic hybrid materials, which are called biominerals. They form through the self-organization of organic molecules and inorganic elements under ambient conditions. Biominerals often have highly organized and hierarchical structures from nanometer to macroscopic length scales, resulting in their remarkable physical and chemical properties that cannot be obtained by simple accumulation of their organic and inorganic constituents. These observations motivate us to create novel functional materials exhibiting properties superior to conventional materials--both synthetic and natural. Herein, we introduce recent progress in understanding biomineralization processes at the molecular level and the development of organic/inorganic hybrid materials by these processes. We specifically outline fundamental molecular studies on silica, iron oxide, and calcium carbonate biomineralization and describe material synthesis based on these mechanisms. These approaches allow us to design a variety of advanced hybrid materials with desired morphologies, sizes, compositions, and structures through environmentally friendly synthetic routes using functions of organic molecules.

  14. Fluorescence microscopy as an alternative to electron microscopy for microscale dispersion evaluation of organic-inorganic composites

    NASA Astrophysics Data System (ADS)

    Guan, Weijiang; Wang, Si; Lu, Chao; Tang, Ben Zhong

    2016-06-01

    Inorganic dispersion is of great importance for actual implementation of advanced properties of organic-inorganic composites. Currently, electron microscopy is the most conventional approach for observing dispersion of inorganic fillers from ultrathin sections of organic-inorganic composites at the nanoscale by professional technicians. However, direct visualization of macrodispersion of inorganic fillers in organic-inorganic composites using high-contrast fluorescent imaging method is hampered. Here we design and synthesize a unique fluorescent surfactant, which combines the properties of the aggregation-induced emission (AIE) and amphiphilicity, to image macrodispersion of montmorillonite and layered double hydroxide fillers in polymer matrix. The proposed fluorescence imaging provides a number of important advantages over electron microscope imaging, and opens a new avenue in the development of direct three-dimensional observation of inorganic filler macrodispersion in organic-inorganic composites.

  15. Fluorescence microscopy as an alternative to electron microscopy for microscale dispersion evaluation of organic-inorganic composites.

    PubMed

    Guan, Weijiang; Wang, Si; Lu, Chao; Tang, Ben Zhong

    2016-06-02

    Inorganic dispersion is of great importance for actual implementation of advanced properties of organic-inorganic composites. Currently, electron microscopy is the most conventional approach for observing dispersion of inorganic fillers from ultrathin sections of organic-inorganic composites at the nanoscale by professional technicians. However, direct visualization of macrodispersion of inorganic fillers in organic-inorganic composites using high-contrast fluorescent imaging method is hampered. Here we design and synthesize a unique fluorescent surfactant, which combines the properties of the aggregation-induced emission (AIE) and amphiphilicity, to image macrodispersion of montmorillonite and layered double hydroxide fillers in polymer matrix. The proposed fluorescence imaging provides a number of important advantages over electron microscope imaging, and opens a new avenue in the development of direct three-dimensional observation of inorganic filler macrodispersion in organic-inorganic composites.

  16. Design and properties of functional hybrid organic-inorganic membranes for fuel cells.

    PubMed

    Laberty-Robert, C; Vallé, K; Pereira, F; Sanchez, C

    2011-02-01

    This critical review presents a discussion on the major advances in the field of organic-inorganic hybrid membranes for fuel cells application. The hybrid organic-inorganic approach, when the organic part is not conductive, reproduces to some extent the behavior of Nafion where discrete hydrophilic and hydrophilic domains are homogeneously distributed. A large variety of proton conducting or non conducting polymers can be combined with various functionalized, inorganic mesostructured particles or an inorganic network in order to achieve high proton conductivity, and good mechanical and chemical properties. The tuning of the interface between these two components and the control over chemical and processing conditions are the key parameters in fabricating these hybrid organic-inorganic membranes with a high degree of reproducibility. This dynamic coupling between chemistry and processing requires the extensive use and development of complementary ex situ measurements with in situ characterization techniques, following in real time the molecular precursor solutions to the formation of the final hybrid organic-inorganic membranes. These membranes combine the intrinsic physical and chemical properties of both the inorganic and organic components. The development of the sol-gel chemistry allows a fine tuning of the inorganic network, which exhibits acid-based functionalized pores (-SO(3)H, -PO(3)H(2), -COOH), tunable pore size and connectivity, high surface area and accessibility. As such, these hybrid membranes containing inorganic materials are a promising family for controlling conductivity, mechanical and chemical properties (349 references).

  17. Organic-inorganic hybrid mesoporous silicas: functionalization, pore size, and morphology control.

    PubMed

    Park, Sung Soo; Ha, Chang-Sik

    2006-01-01

    Topological design of mesoporous silica materials, pore architecture, pore size, and morphology are currently major issues in areas such as catalytic conversion of bulky molecules, adsorption, host-guest chemistry, etc. In this sense, we discuss the pore size-controlled mesostructure, framework functionalization, and morphology control of organic-inorganic hybrid mesoporous silicas by which we can improve the applicability of mesoporous materials. First, we explain that the sizes of hexagonal- and cubic-type pores in organic-inorganic hybrid mesoporous silicas are well controlled from 24.3 to 98.0 A by the direct micelle-control method using an organosilica precursor and surfactants with different alkyl chain lengths or triblock copolymers as templates and swelling agents incorporated in the formed micelles. Second, we describe that organic-inorganic hybrid mesoporous materials with various functional groups form various external morphologies such as rod, cauliflower, film, rope, spheroid, monolith, and fiber shapes. Third, we discuss that transition metals (Ti and Ru) and rare-earth ions (Eu(3+) and Tb(3+)) are used to modify organic-inorganic hybrid mesoporous silica materials. Such hybrid mesoporous silica materials are expected to be applied as excellent catalysts for organic reactions, photocatalysis, optical devices, etc. c) 2006 The Japan Chemical Journal Forum and Wiley Periodicals, Inc.

  18. Preparation and properties of organic-inorganic composite superabsorbent based on xanthan gum and loess.

    PubMed

    Feng, Enke; Ma, Guofu; Wu, Yajuan; Wang, Haiping; Lei, Ziqiang

    2014-10-13

    A new, low-cost, and eco-friendly organic-inorganic composite superabsorbent was successfully synthesized in aqueous solution by polymerization xanthan gum (XG), neutralized acrylic acid (AA) and loess using ammonium persulfate (APS) as initiator and N,N-methylenebisacrylamide (MBA) as crosslinker. Structure and morphological characterizations of the composite superabsorbent were investigated by Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The loess content, pH values, surfactants, salts and temperature which could affect the swelling and water-retention capabilities of the composite superabsorbent were investigated. The composite superabsorbent exhibits excellent water absorbency (610 g/g in distilled water), pH-stability (pH 5-10), and higher swelling capacity in anionic surfactant solution; on the other hand, the composite superabsorbent can be used for removing multivalent metal ions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Particle size distributions and organic-inorganic compositions of suspended particulate matters around the Bohai Strait

    NASA Astrophysics Data System (ADS)

    Wang, Xiao; Bian, Changwei; Bi, Rong; Jiang, Wensheng; Zhang, Hua; Zhang, Xueqing

    2017-02-01

    Laser in situ scattering and transmissometry (LISST) significantly improves our ability to assess particle size distribution (PSD) in seawater, while wide-ranging measurements of the organic-inorganic compositions of suspended particulate matters (SPM) are still difficult by using traditional methods such as microscopy. In this study, PSD properties and SPM compositions around the Bohai Strait (China) were investigated based on the measurements by LISST in combination with hydro-biological parameters collected from a field survey in summer 2014. Four typical PSD shapes were found in the region, namely right-peak, left-peak, double-peak and negative-skew shapes. The double-peak and negative-skew shapes may interconvert into each other along with strong hydrodynamic variation. In the upper layer of the Bohai Sea, organic particles were in the majority, with inorganic particles rarely observed. In the bottom layer, SPM were the mixture of organic and inorganic matters. LISST provided valuable baseline information on size-resolved organic-inorganic compositions of SPM: the size of organic particles mainly ranged from 4 to 20 μm and 40 to 100 μm, while most SPM ranging from 20 to 40 μm were composed of inorganic sediment.

  20. Morphological structure of Gluconacetobacter xylinus cellulose and cellulose-based organic-inorganic composite materials

    NASA Astrophysics Data System (ADS)

    Smyslov, R. Yu; Ezdakova, K. V.; Kopitsa, G. P.; Khripunov, A. K.; Bugrov, A. N.; Tkachenko, A. A.; Angelov, B.; Pipich, V.; Szekely, N. K.; Baranchikov, A. E.; Latysheva, E.; Chetverikov, Yu O.; Haramus, V.

    2017-05-01

    Scanning electron microscopy, ultra-small-angle neutron scattering (USANS), small-angle neutron and X-ray scattering (SANS and SAXS), as well as low-temperature nitrogen adsorption, were used in the studies of micro- and mesostructure of polymer matrix prepared from air-dry preliminarily disintegrated cellulose nano-gel film (synthesized by Gluconacetobacter xylinus) and the composites based on this bacterial cellulose. The composites included ZrO2 nanoparticles, Tb3+ in the form of low molecular weight salt and of metal-polymer complex with poly(vinylpyrrolydone)-poly(methacryloyl-o-aminobenzoic acid) copolymer. The combined analysis of the data obtained allowed revealing three levels of fractal organization in mesostructure of G. xylinus cellulose and its composites. It was shown that both the composition and an aggregation state of dopants have a significant impact on the structural characteristics of the organic-inorganic composites. The composites containing Tb3+ ions demonstrate efficient luminescence; its intensity is an order of magnitude higher in the case of the composites with the metal-polymer complex. It was found that there is the optimal content of ZrO2 nanoparticles in composites resulting in increased Tb3+ luminescence.

  1. Structure/property relations of elastomeric hybrid organic-inorganic composites

    NASA Astrophysics Data System (ADS)

    Miller, Thomas Michael

    Hybrid organic-inorganic composites have been synthesized by the sol-gel processing of triethoxysilane end functionalized poly(tetramethylene oxide) and tetraethxoysilane. The resulting transparent materials are elastomeric gels crosslinked by an amorphous polysilicate phase. Elementary rubber-elasticity theory in conjunction with dynamic mechanical spectroscopy was applied to these seemingly nonideal networks to quantify the change in phase interaction induced by aging the benchmark acid catalyzed gels in a basic solution of 70% ethylamine in water. The change in the average molar mass between crosslinks explained the previously published mechanical and dynamic mechanical results. Furthermore, the application of this theory to these seemingly nonideal networks resulted in network parameters that were in excellent agreement with traditional equilibrium swelling estimates. The work was then extended by utilizing this ethylamine solution to catalyze the sol-gel reaction in-situ. The effect of this change in catalyst upon the oxygen diffisivity of the hybrids as a function of polysilicate loading was investigated using a luminescence based approach. While the diffusivity of the acid catalyzed gels decreased with increasing loading, the base catalyzed gels did not indicating that the polysilicate domains resulting from the base catalysis possess considerable porosity. However, the pores appear to be much too small for Knudsen diffusion, a commonly observed gas separation mechanism in porous ceramic membranes. To investigate the influence of polysilicate network polarity and spatial distribution, the sol-gel processing of the hybrids was adjusted to produce two classes of gels. One exhibited a more discrete polysilicate phase possessing greater network connectivity and reduced silanol content than the other. This was accomplished by using dimethylformamide in place of tetrahydrofuran as the organic solvent constituent of the sol. Poly(methacrylic acid

  2. Photochromic organic-inorganic composite materials prepared by sol-gel processing: properties and potentials

    NASA Astrophysics Data System (ADS)

    Hou, Lisong; Mennig, Martin; Schmidt, Helmut K.

    1994-09-01

    The sol-gel method which features a low-temperature wet-chemical process opens vast possibilities to incorporating organic dyes into solid matrices for various optical applications. In this paper we present our experimental results on the sol-gel derived photochromic organic- inorganic composite (Ormocer) materials following an introductory description of the sol-gel process and a brief review on the state of the art of the photochromic solids prepared using this method. Our photochromic spirooxazine-Ormocer gels and coatings possess better photochromic response and color-change speed than the corresponding photochromic polymer coatings and similar photochemical stability to the latter. Further developments are proposed as to tackle the temperature dependence problem and further tap the potentialities of the photochromic dye-Ormocer material for practical applications.

  3. A novel organic-inorganic hybrid composition for controllably synthesizing AgI nanocrystals

    NASA Astrophysics Data System (ADS)

    Liu, Junxue; He, Sheng; An, Changhua; Zhang, Jun

    2017-05-01

    The ability to control the shape and morphology of semiconductor macro/nanocrystals is critical to applications such as photocatalysis, electrocatalysis, photonics and nanoelectronics. Despite significant advances in controlling the shapes by thermal decomposition and solvothermal methods, rigorous shape control by low temperature and aqueous phase controlling remains challenging. Herein, a facile synthetic method based on ethylenediamine assisted precursor transformation technique has been developed for the fabrication of AgI nanocrystals. The central features of our approach are the use of ethylenediamine (en) as complexant and the use of polyvinylpyrrolidone (PVP) as capping surfactants to form Ag(en)xI precursor, which is followed by removing en to form AgI crystals. This work provides new insights into the use of a novel organic-inorganic hybrid composition as precursors for nanocrystals synthesis and offers a potential route to achieve well-defined morphology of inorganic nanostructures with uniform shape and size.

  4. New organic-inorganic hybrid material based on functional cellulose nanowhisker, polypseudorotaxane and Au nanorods.

    PubMed

    Garavand, Ali; Dadkhah Tehrani, Abbas

    2016-11-05

    Organic-inorganic functional hybrid materials play a major role in the development of advanced functional materials and recently have gained growing interest of the worldwide community. In this context, new hybrid organic-inorganic gel consisting of cellulose nanowhisker xanthate (CNWX) and S-H functionalized polypseudorotaxane (PPR) as organic parts of gel and gold nanorods (GNRs) as inorganic cross-linking agent were prepared. Firstly, thiolated α-cyclodextrin (α-CD-SH) was threaded onto poly-(ethylene glycol) bis (mercaptoethanoate ester) (PEG-SH) to give polypseudorotaxane (PPR) and then it reacted with GNRs in the presence of CNWX to give the new hybrid gel material. The new synthesized gel and its components characterized by spectroscopic measurement methods such as FT-IR, UV-vis and NMR spectroscopy. Interestingly, hybrid gel showed new polygonal plate like morphology with 45-60nm thickness and 400-600nm width. The obtained gel may have potential application in many fields especially in biomedical applications.

  5. High emission reduction performance of a novel organic-inorganic composite filters containing sepiolite mineral nanofibers.

    PubMed

    Wang, Fei; Zhang, Hui; Liang, Jinsheng; Tang, Qingguo; Li, Yanxia; Shang, Zengyao

    2017-03-02

    In this work, a new organic-inorganic composite filter was prepared. The thickness, pore size, air permeability, bursting strength and microstructure were characterized systematically, proving that coatings had regulatory effect on filters physical properties. Benefitting from the distinct coatings containing 5% sepiolite nanofibers after five times dilution, the physical properties of corresponding air filter exhibits the most favorable performance and meet the standard of air filter. When used as fuel filter, it satisfies the fuel filter standard and achieves the best performance after six times dilution. The contrast test on engine emission was taken based on auto filters coated with/without as prepared nanofibers. An obvious decrease in the emission of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) can be observed after installation of composite filter on vehicles. Under the high idle condition, gasoline engine emission decreased by 8.13%, 11.35% and 44.91% for CO, HC and NOx, respectively. When tested in the low idle condition, engine emission reduced by 0.43%, 1.14% and 85.67% for CO, HC and NOx, respectively. The diesel engine emissions of CO, NOx and total amount of HC and NOx decreased by 32.26%, 3.28% and 4.66%, respectively. The results illustrate the composite installation exhibits satisfactory emission reduction effect.

  6. High emission reduction performance of a novel organic-inorganic composite filters containing sepiolite mineral nanofibers

    PubMed Central

    Wang, Fei; Zhang, Hui; Liang, Jinsheng; Tang, Qingguo; Li, Yanxia; Shang, Zengyao

    2017-01-01

    In this work, a new organic-inorganic composite filter was prepared. The thickness, pore size, air permeability, bursting strength and microstructure were characterized systematically, proving that coatings had regulatory effect on filters physical properties. Benefitting from the distinct coatings containing 5% sepiolite nanofibers after five times dilution, the physical properties of corresponding air filter exhibits the most favorable performance and meet the standard of air filter. When used as fuel filter, it satisfies the fuel filter standard and achieves the best performance after six times dilution. The contrast test on engine emission was taken based on auto filters coated with/without as prepared nanofibers. An obvious decrease in the emission of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) can be observed after installation of composite filter on vehicles. Under the high idle condition, gasoline engine emission decreased by 8.13%, 11.35% and 44.91% for CO, HC and NOx, respectively. When tested in the low idle condition, engine emission reduced by 0.43%, 1.14% and 85.67% for CO, HC and NOx, respectively. The diesel engine emissions of CO, NOx and total amount of HC and NOx decreased by 32.26%, 3.28% and 4.66%, respectively. The results illustrate the composite installation exhibits satisfactory emission reduction effect. PMID:28252034

  7. High emission reduction performance of a novel organic-inorganic composite filters containing sepiolite mineral nanofibers

    NASA Astrophysics Data System (ADS)

    Wang, Fei; Zhang, Hui; Liang, Jinsheng; Tang, Qingguo; Li, Yanxia; Shang, Zengyao

    2017-03-01

    In this work, a new organic-inorganic composite filter was prepared. The thickness, pore size, air permeability, bursting strength and microstructure were characterized systematically, proving that coatings had regulatory effect on filters physical properties. Benefitting from the distinct coatings containing 5% sepiolite nanofibers after five times dilution, the physical properties of corresponding air filter exhibits the most favorable performance and meet the standard of air filter. When used as fuel filter, it satisfies the fuel filter standard and achieves the best performance after six times dilution. The contrast test on engine emission was taken based on auto filters coated with/without as prepared nanofibers. An obvious decrease in the emission of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) can be observed after installation of composite filter on vehicles. Under the high idle condition, gasoline engine emission decreased by 8.13%, 11.35% and 44.91% for CO, HC and NOx, respectively. When tested in the low idle condition, engine emission reduced by 0.43%, 1.14% and 85.67% for CO, HC and NOx, respectively. The diesel engine emissions of CO, NOx and total amount of HC and NOx decreased by 32.26%, 3.28% and 4.66%, respectively. The results illustrate the composite installation exhibits satisfactory emission reduction effect.

  8. Structure and ionic interactions of organic-inorganic composite polymer electrolytes studied by solid-state NMR and Raman spectroscopy.

    PubMed

    Joo, Chan Gyu; Bronstein, Lyudmila M; Karlinsey, Robert L; Zwanziger, Josef W

    2002-01-01

    Solid-state NMR studies of composite polymer electrolytes are reported. The materials consist of polyethylene oxide and an organic inorganic composite, together with a lithium salt, and are candidates for electrolytes in solid-state lithium ion batteries. Silicon and aluminum MAS and multiple quantum MAS are used to characterize the network character of the organic-inorganic composite, and spin diffusion measurements are used to determine the nanostructure of the polymer/composite blending. Multiple quantum spin counting is used to measure the ion aggregation. The NMR results are supported by Raman spectra, calorimetry, and impedance spectroscopy. From these experiments it is concluded that the composite suppresses polymer crystallization without suppressing its local mobility, and also suppresses the tendency for the ions to aggregate. This polymer composite thus appears very promising for application in lithium ion batteries.

  9. Electrophoretic deposition of organic/inorganic composite coatings containing ZnO nanoparticles exhibiting antibacterial properties.

    PubMed

    Karbowniczek, Joanna; Cordero-Arias, Luis; Virtanen, Sannakaisa; Misra, Superb K; Valsami-Jones, Eugenia; Tuchscherr, Lorena; Rutkowski, Bogdan; Górecki, Kamil; Bała, Piotr; Czyrska-Filemonowicz, Aleksandra; Boccaccini, Aldo R

    2017-08-01

    To address one of the serious problems associated with permanent implants, namely bacterial infections, novel organic/inorganic coatings containing zinc oxide nanoparticles (nZnO) are proposed. Coatings were obtained by electrophoretic deposition (EPD) on stainless steel 316L. Different deposition conditions namely: deposition times in the range 60-300s and applied voltage in the range 5-30V as well as developing a layered coating approach were studied. Antibacterial tests against gram-positive Staphylococcus aureus and gram-negative Salmonella enteric bacteria confirmed the activity of nZnO to prevent bacterial growth. Coatings composition and morphology were analyzed by thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy. Moreover, the corrosion resistance was analyzed by evaluation of the polarization curves in DMEM at 37°C, and it was found that coatings containing nZnO increased the corrosion resistance compared to the bare substrate. Considering all results, the newly developed coatings represent a suitable alternative for the surface modification of metallic implants. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Organic-inorganic hybrid foams with diatomite addition: Effect on functional properties

    NASA Astrophysics Data System (ADS)

    Verdolotti, L.; D'Auria, M.; Lavorgna, M.; Vollaro, P.; Iannace, S.; Capasso, I.; Galzerano, B.; Caputo, D.; Liguori, B.

    2016-05-01

    Organic-inorganic hybrid foams were prepared by using metakaolin, diatomite as a partial (or total) replacement of metakaolin, as matrix, silicon and whipped protein as pore forming. The foamed systems were hardened at defined temperature and time and then characterized by mechanical point of view through compression tests and by functional point of view through fire reaction and acoustic tests. The experimental findings highlighted that the replacement of diatomite in the formulation affected the morphological structure of the foams and consequently their mechanical properties. In particular, the consolidation mechanism in the diatomite based-hybrid foams changed from geopolymerization to a silicate polycondensation mechanism. Therefore, mechanical performances enhanced with increasing of the diatomite content. Fire reaction tests, such as non-combustibility and cone calorimeter tests, showed positive thermal inertia of samples regardless of the content of diatomite.

  11. Electrospun Superhydrophobic Organic/Inorganic Composite Nanofibrous Membranes for Membrane Distillation.

    PubMed

    Li, Xiong; Yu, Xufeng; Cheng, Cheng; Deng, Li; Wang, Min; Wang, Xuefen

    2015-10-07

    Electrospun superhydrophobic organic/inorganic composite nanofibrous membranes exhibiting excellent direct contact membrane distillation (DCMD) performance were fabricated by a facile route combining the hydrophobization of silica nanoparticles (SiO2 NPs) and colloid electrospinning of the hydrophobic silica/poly(vinylidene fluoride) (PVDF) matrix. Benefiting from the utilization of SiO2 NPs with three different particle sizes, the electrospun nanofibrous membranes (ENMs) were endowed with three different delicate nanofiber morphologies and fiber diameter distribution, high porosity, and superhydrophobic property, which resulted in excellent waterproofing and breathability. Significantly, structural attributes analyses have indicated the major contributing role of fiber diameter distribution on determining the augment of permeate vapor flux through regulating mean flow pore size (MFP). Meanwhile, the extremely high liquid entry pressure of water (LEPw, 2.40 ± 0.10 bar), robust nanofiber morphology of PVDF immobilized SiO2 NPs, remarkable mechanical properties, thermal stability, and corrosion resistance endowed the as-prepared membranes with prominent desalination capability and stability for long-term MD process. The resultant choreographed PVDF/silica ENMs with optimized MFP presented an outstanding permeate vapor flux of 41.1 kg/(m(2)·h) and stable low permeate conductivity (∼2.45 μs/cm) (3.5 wt % NaCl salt feed; ΔT = 40 °C) over a DCMD test period of 24 h without membrane pores wetting detected. This result was better than those of typical commercial PVDF membranes and PVDF and modified PVDF ENMs reported so far, suggesting them as promising alternatives for MD applications.

  12. Shape control synthesis of spheroid and rod-like silver nanostructures in organic-inorganic sol-gel composite

    NASA Astrophysics Data System (ADS)

    Saraidarov, T.; Levchenko, V.; Popov, I.; Reisfeld, R.

    2009-07-01

    The synthesis of a variety of spheroid and rod-like silver nanoparticles in hybrid organic-inorganic sol-gel composite films was examined. The sol-gel matrix used in this work involves urethane terminated silica network which acts as a stabilizing and coupling agent and can complex with silver atoms through its secondary amine functionality and form stable colloid dispersions. The parameters determining the particles size and shape are the starting concentrations of silver ions, the coordination and reduction abilities of the solvent and the reaction kinetics and temperature. In this work the reduction process of silver ion was performed by DMF in sol-gel polyurethane precursor solution at two reaction temperatures: (a) 40 ∘C and (b) reflux at boiling temperature. The effects of concentration and temperature of solution on the morphology and uniformity of silver nanorods were investigated by UV-VIS spectroscopy, SEM and TEM. Spheroid nanoparticles size was as 10-12 nm. Electron diffraction shows that all nanoparticles have a silver face-centered cubic crystal lattice. The silver nanoparticles obtained in composite films exhibit a strong characteristic extinction peak, due to surface plasmon resonance occurring nearly 420-440 nm.

  13. Improved oxidation resistance of organic/inorganic composite atomic layer deposition coated cellulose nanocrystal aerogels

    SciTech Connect

    Smith, Sean W.; Matthews, David J.; Conley, John F.; Buesch, Christian; Simonsen, John

    2014-07-01

    Cellulose nanocrystal (CNC) aerogels are coated with thin conformal layers of Al{sub 2}O{sub 3} using atomic layer deposition to form hybrid organic/inorganic nanocomposites. Electron probe microanalysis and scanning electron microscopy analysis indicated the Al{sub 2}O{sub 3} penetrated more than 1500 μm into the aerogel for extended precursor pulse and exposure/purge times. The measured profile of coated fiber radius versus depth from the aerogel surface agrees well with simulations of precursor penetration depth in modeled aerogel structures. Thermogravimetric analysis shows that Al{sub 2}O{sub 3} coated CNC aerogel nanocomposites do not show significant thermal degradation below 295 °C as compared with 175 °C for uncoated CNC aerogels, an improvement of over 100 °C.

  14. Interconnected porosity analysis by 3D X-ray microtomography and mechanical behavior of biomimetic organic-inorganic composite materials.

    PubMed

    Alonso-Sierra, S; Velázquez-Castillo, R; Millán-Malo, B; Nava, R; Bucio, L; Manzano-Ramírez, A; Cid-Luna, H; Rivera-Muñoz, E M

    2017-11-01

    Hydroxyapatite-based materials have been used for dental and biomedical applications. They are commonly studied due to their favorable response presented when used for replacement of bone tissue. Those materials should be porous enough to allow cell penetration, internal tissue growth, vascular incursion and nutrient supply. Furthermore, their morphology should be designed to guide the growth of new bone tissue in anatomically applicable ways. In this work, the mechanical performance and 3D X-ray microtomography (X-ray μCT) study of a biomimetic, organic-inorganic composite material, based on hydroxyapatite, with physicochemical, structural, morphological and mechanical properties very similar to those of natural bone tissue is reported. Ceramic pieces in different shapes and several porous sizes were produced using a Modified Gel Casting Method. Pieces with a controlled and 3D hierarchical interconnected porous structure were molded by adding polymethylmethacrylate microspheres. Subsequently, they were subject to a thermal treatment to remove polymers and to promote a sinterization of the ceramic particles, obtaining a HAp scaffold with controlled porosity. Then, two different organic phases were used to generate an organic-inorganic composite material, so gelatin and collagen, which was extracted from bovine tail, were used. The biomimetic organic-inorganic composite material was characterized by Scanning Electron Microscopy, Energy Dispersive X-ray Spectroscopy, X-ray Diffraction, Fourier Transform Infrared Spectroscopy and 3D X-ray microtomography techniques. Mechanical properties were characterized in compression tests, obtaining a dramatic and synergic increment in the mechanical properties due to the chemical and physical interactions between the two phases and to the open-cell cellular behavior of the final composite material; the maximum compressive strength obtained corresponds to about 3 times higher than that reported for natural cancellous bone. The

  15. Size-controlled hydroxyapatite nanoparticles as self-organized organic-inorganic composite materials.

    PubMed

    Rusu, Viorel Marin; Ng, Chuen-How; Wilke, Max; Tiersch, Brigitte; Fratzl, Peter; Peter, Martin G

    2005-09-01

    This paper presents some results concerning the size-controlled hydroxyapatite nanoparticles obtained in aqueous media in a biopolymer matrix from soluble precursors salts. Taking the inspiration from nature, where composite materials made of a polymer matrix and inorganic fillers are often found, e.g. bone, shell of crustaceans, shell of eggs, etc., the feasibility on making composite materials containing chitosan and nanosized hydroxyapatite was investigated. A stepwise co-precipitation approach was used to obtain different types of composites by means of different ratio between components. The synthesis of hydroxyapatite was carried out in the chitosan matrix from calcium chloride and sodium dihydrogenphosphate in alkaline solutions at moderate pH of 10-11 for 24 h. Our research is focused on studying and understanding the structure of this class of composites, aiming at the development of novel materials, controlled at the nanolevel scale. The X-ray diffraction technique was employed in order to study the kinetic of hydroxyapatite formation in the chitosan matrix as well as to determine the HAp crystallite sizes in the composite samples. The hydroxyapatite synthesized using this route was found to be nano-sized (15-50 nm). Moreover, applying an original approach to analyze the (002) XRD diffraction peak profile of hydroxyapatite by using a sum of two Gauss functions, the bimodal distribution of nanosized hydroxyapatite within the chitosan matrix was revealed. Two types of size distribution domains such as cluster-like (between 200 and 400 nm), which are the habitat of ''small'' hydroxyapatite nanocrystallites and scattered-like, which are the habitat of ''large'' hydroxyapatite nanocrystallites was probed by TEM and CSLM. The structural features of composites suggest that self-assembly processes might be involved. The composites contain nanosized hydroxyapatite with structural features close to those of biological apatites that make them attractive for bone

  16. Bridged polysilsesquioxanes: Hybrid organic-inorganic materials as fuel cell polyelectrolyte membranes and functional nanoparticles

    NASA Astrophysics Data System (ADS)

    Khiterer, Mariya

    2007-05-01

    This dissertation describes the design, fabrication, and characterization of organic-inorganic hybrid materials. Several classes of bridged polysilsesquioxanes are presented. The first class is a membrane material suitable for fuel cell technology as a proton conducting polyelectrolyte. The second class includes hybrid nanoparticles for display device applications and chromatographic media. Chapter 1 is an introduction to hybrid organic-inorganic materials. Sol-gel chemistry is discussed, followed by a survey of prominent examples of silica hybrids. Examples of physical organic-silica blends and covalent organo-silicas, including ORMOCERSRTM, polyhedral oligomeric silsesquioxanes, and bridged polysilsesquioxanes are discussed. Bridged polysilsesquioxanes are described in great detail. Monomer synthesis, sol-gel chemistry, processing, characterization, and physical properties are included. Chapter 2 describes the design of polyelectrolyte bridged polysilsesquioxane membranes. The materials contain covalently bound sulfonic acid groups originating from the corresponding disulfides. These organic-inorganic hybrid materials integrate a network supporting component which is systematically changed to fine-tune their physical properties. The membranes are characterized as PEM fuel cell electrolytes, where proton conductivities of 4-6 mS cm-1 were measured. In Chapter 3 techniques for the preparation of bridged polysilsesquioxane nanoparticles are described. An inverse water-in-oil microemulsion polymerization method is developed to prepare cationic nanoparticles, including viologen-bridged materials with applications in electrochromic display devices. An aqueous ammonia system is used to prepare neutral nanoparticles containing hydrocarbon bridging groups, which have potential applications as chromatographic media. Chapter 4 describes electrochromic devices developed in collaboration with the Heflin group of Virginia Tech, which incorporate viologen bridged nanoparticles

  17. Self-powered pH sensor based on a flexible organic-inorganic hybrid composite nanogenerator.

    PubMed

    Saravanakumar, Balasubramaniam; Soyoon, Shin; Kim, Sang-Jae

    2014-08-27

    In this study, we developed an innovative, flexible, organic-inorganic hybrid composite nanogenerator, which was used to drive a self-powered microwire-based pH sensor. The hybrid composite nanogenerator was fabricated using ZnO nanowire and piezoelectric polymer poly(vinylidene fluoride), through a simple, inexpensive solution-casting technique. The fabricated hybrid composite nanogenerator delivered a maximum open-circuit voltage of 6.9 V and a short-circuit current of 0.96 μA, with an output power of 6.624 μW under uniaxial compression. This high-performance, electric poling free composite nanogenerator opens up the possibility of industrial-scale fabrication. The hybrid nanogenerator demonstrated its ability to drive five green LEDs simultaneously, without using an energy-storage device. Additionally, we constructed a self-powered pH sensor, using a ZnO microwire powered with our hybrid nanogenerator. The output voltage varied according to changes in the pH level. This study demonstrates the feasibility of using a hybrid nanogenerator as a self-powered device that can be extended for use as a biosensor for environmental monitoring and/or as a smart, wearable, vibration sensor in future applications.

  18. Influence of UV and visible laser light on the structure and composition of layered organic - inorganic zinc and copper nanocomposites

    SciTech Connect

    Borodina, T I; Val'yano, G E; Gololobova, O A; Karpukhin, Vyacheslav T; Malikov, Mikhail M; Strikanov, D A

    2013-06-30

    The effect of UV and visible laser light on the structure and composition of layered organic-inorganic nanocomposites of transition metals, zinc [zinc hydroxide/dodecyl sulfate, Zn(OH){sub 2}DS] and copper [copper hydroxide/dodecyl sulfate, Cu{sub 2}(OH){sub 3}DS], has been experimentally investigated. Nanocomposites have been synthesised by laser ablation of targets from the aforementioned materials in aqueous solutions of a surfactant: sodium dodecyl sulfate (SDS). The absorption and Raman spectra of the thus obtained colloids are analysed. The structural composition and morphology of the solid phase isolated from the colloids are determined using X-ray diffraction, atomic-force microscopy, and scanning electron microscopy. It is shown that exposure of nanocomposites to UV and visible laser light with intensities in the range of 5 Multiplication-Sign 10{sup 5}-10{sup 7} W cm{sup -2} or higher leads to their fragmentation and change in their composition. (optical nanostructures)

  19. Improvement of photofatigue resistance of spirooxazine entrapped in organic-inorganic composite synthesized via the sol-gel process

    NASA Astrophysics Data System (ADS)

    Hou, Lisong; Mennig, Martin; Schmidt, Helmut K.

    1994-10-01

    A photochromic dye, spirooxazine (SO), was incorporated in organic-inorganic composite (OIC) materials by the advantages of sol-gel processing. It has been found that the photochromic response is high enough and the fading rate is similar to the dye-in-ethanol solution while the photofatigue resistance is strongly dependent on the matrix composition and the starting compounds. In the present work, we present results on the effect of matrix composition and starting compounds as well as additives on the photofatigue resistance of SO- OIC photochromic coatings. Sol-gel coatings synthesized from methyltrimethoxysilane (MTMS) and glycidyloxypropyltrimethoxysilane (GPTMS) as starting compounds, and using 1H,1H,2H,2H-perfluoroalkyltrimethoxysilane (FAS) and 1-methylimidazole (MI) as additives provide the SO dye with a favorable matrix environment in terms of photofatigue, so that the overall photochromic performance of the dye can be optimized. The photofatigue resistance reaches the same level as, while both the photochromic response and fading rate are much better than the SO-PMMA coatings.

  20. Evidence for a composite organic-inorganic fabric of belemnite rostra: implication for palaeoceanography

    NASA Astrophysics Data System (ADS)

    Hoffmann, Rene; Richter, Detlev K.; Neuser, Rolf D.; Jöns, Niels; Linzmeier, Benjamin J.; Lemanis, Robert E.; Fusseis, Florian; Xiao, Xianghui; Immenhauser, Adrian

    2017-04-01

    with modern cephalopods. Intra-rostral porosity was occluded post mortem by earliest diagenetic isopachous calcite cements of a non-biogenic origin. These may have been precipitated due to increased alkalinity related to the decay of organic matter. If this holds true, then the resulting fabric represents a composite biogenic/abiogenic structure precipitated at different times and depths in the water column. We suggest that these findings have significance for those using belemnite rostra as archives of their palaeoenvironment, for the reconstruction of belemnite palaeoecology, and for the functional interpretation of belemnite rostra.

  1. Synthesis of fluorescent composite macromolecules by using organic/inorganic assemblies as structural units.

    PubMed

    Liu, Ze-Hua; Wang, Yan; Ge, Guo-Ping; Guo, Hai-Qing

    2006-12-01

    A synthetic pathway is introduced to construct fluorescent composite macromolecules with supramolecular assemblies as structural units. The supramolecular assembly that contains polymerizable groups is used as a starting "monomer." The supramolecular assembly is composed of nanoparticle core of II - IV group semiconductor and organic ammonium shell. Polymerization of the assemblies yields soluble composite macromolecules. Light scattering data show that the macromolecule has an average size of about 310 nm in diameter in chloroform; AFM image illustrates that the macromolecule has an average diameter of 120 nm and an average height of 35 nm on a mica surface and photoluminescent spectra reveal that the macromolecule performs an extraordinary enhancement in fluorescence intensity of the semiconductor nanoparticles. These observations suggest that construction of macromolecules with supramolecular assembly as starting monomer may produce generations of materials with novel properties.

  2. Photothermal initiation of hybrid organic/inorganic metastable interstitial composites: synergistic effects on the dynamics of energy release.

    PubMed

    Mileham, Melissa L; Park, Chi-Dong; van de Burgt, Lambertus J; Kramer, Michael P; Stiegman, A E

    2008-12-11

    The organic high-energy material pentaerythritol tetranitrate (PETN) was incorporated at low concentrations into Al (100 nm)/Fe(2)O(3) metastable intersitital composites (MIC) to form a hybrid organic/inorganic high-energy material. Studies of the dynamics of energy release were carried out by initiating the reaction photothermally with a single 8 ns pulse of the 1064 nm fundamental of a Nd:YAG laser. The reaction dynamics were measured using time-resolved spectroscopy of the light emitted from the deflagrating material. Two parameters were measured: the time to initiation and the duration of the deflagration. The presence of small amounts of PETN (16 mg/g of MIC) results in a dramatic decrease in the initiation time. This is attributed to a contribution to the temperature of the reacting system from the combustion of the PETN that, at lower loadings, appears to follow an Arrhenius dependence. The presence of PETN was also found to reduce the energy density required for single-pulse photothermal initiation by an order of magnitude, suggesting that hybrid materials such as this may be engineered to optimize their use as an efficient photodetonation medium.

  3. Evidence for a composite organic-inorganic fabric of belemnite rostra: Implications for palaeoceanography and palaeoecology

    NASA Astrophysics Data System (ADS)

    Hoffmann, R.; Richter, D. K.; Neuser, R. D.; Jöns, N.; Linzmeier, B. J.; Lemanis, R. E.; Fusseis, F.; Xiao, X.; Immenhauser, A.

    2016-07-01

    Carbonate skeletons of fossil marine organisms are widely used to reconstruct palaeoceanographic parameters. Specifically, the geochemistry of Jurassic and Cretaceous belemnite rostra is traditionally interpreted to represent near sea-surface seawater properties. More recently, an increasing number of workers, have reported significant scatter in geochemical data (e.g., δ18O, δ13C, element/Ca ratio) when comparing rostra from the same stratigraphic level or within a single belemnite rostrum. This scatter is not explained by differential diagenetic overprint alone. Here we report petrographic evidence on the primary ultrastructure of rostra of Megateuthis (Middle Jurassic) and Belemnitella and Gonioteuthis (Late Cretaceous). The biogenic ultrastructure consists of a filigree framework of triaxial branches and tetrahedrons of variable size forming a honeycomb-like network. Data presented here suggest that these rostra yielded as much as 50 to 90% primary pore space. On the level of a working hypothesis - and in analogy with modern cephalopods - we propose that the pore space was formerly filled with body fluid and/or organic compounds during the life time of these organisms. Intra-rostral porosity was post mortem occluded by earliest diagenetic isopachous calcite cements of a non-biogenic origin. These may have been precipitated due to increased alkalinity related to the decay of organic matter. If this holds true, then the resulting fabric represents a composite biogenic/abiogenic structure. In order to optically separate the two calcite phases forming a single calcite fibre, we employed a wide range of state-of-the-art analytical tools to thin sections and ultra-thin sections of well-preserved specimens. Pending a verification of these well-supported ultrastructural data by means of high-resolution geochemical analyses from biogenic and abiogenic phases, we suggest that these findings have significance for those using belemnite rostra as archives of their

  4. Deposition of hybrid organic-inorganic composite coatings using an atmospheric plasma jet system.

    PubMed

    Dembele, Amidou; Rahman, Mahfujur; Reid, Ian; Twomey, Barry; MacElroy, J M Don; Dowling, Denis P

    2011-10-01

    The objective of this study is to investigate the influence of alcohol addition on the incorporation of metal oxide nanoparticles into nm thick siloxane coatings. Titanium oxide (TiO2) nanoparticles with diameters of 30-80 nm were incorporated into an atmospheric plasma deposited tetramethylorthosilicate (TMOS) siloxane coating. The TMOS/TiO2 coating was deposited using the atmospheric plasma jet system known as PlasmaStream. In this system the liquid precursor/nanoparticle mixture is nebulised into the plasma. It was observed that prior to being nebulised the TiO2 particles agglomerated and settled over time in the TMOS/TiO2 mixture. In order to obtain a more stable nanoparticle/TMOS suspension the addition of the alcohols methanol, octanol and pentanol to this mixture was investigated. The addition of each of these alcohols was found to stabilise the nanoparticle suspension. The effect of the alcohol was therefore assessed with respect to the properties of the deposited coatings. It was observed that coatings deposited from TMOS/TiO2, with and without the addition of methanol were broadly similar. In contrast the coatings deposited with octanol and pentanol addition to the TMOS/TiO2 mixture were significantly thicker, for a given set of deposition parameters and were also more homogeneous. This would indicate that the alcohol precursor was incorporated into the plasma polymerised siloxane. The incorporation of the organic functionality from the alcohols was confirmed from FTIR spectra of the coatings. The difference in behaviour with alcohol type is likely to be due to the lower boiling point of methanol (65 degrees C), which is lower than the maximum plasma temperature measured at the jet orifice (77 degrees C). This temperature is significantly lower than the 196 degrees C and 136 degrees C boiling points of octanol and pentanol respectively. The friction of the coatings was determined using the Pin-on-disc technique. The more organic coatings deposited with

  5. Growth and assembly of functionalized nanomaterials: Using organic-inorganic polymer hybrid systems

    NASA Astrophysics Data System (ADS)

    Goel, Divya

    Precise positioning of metallic nanostructures on semiconductor surfaces is important for applications such as photovoltaics, metal interconnects, sensing platforms, and many others. The rising cost and complexity with lithographically defined structures demands a parallel fabrication process that enables easy scale up. Surface patterns formed by block copolymers are considered as a promising means to create functional nanoscopic structures needed for the fabrication of miniaturized devices. The integration of polymers with inorganic nano-materials could find widespread applications in scientific research because it provides a strategy to combine the use of polymers as hosts, and the optical, electronic, and catalytic properties of nanoparticles. This thesis explores a technique that employs patterns in block copolymers as a template for the directed self-assembly of the nanocrystals. One area investigated was the preparation of thermally stable nanoparticles that could be intercalated into block copolymers. Nanoparticles of various materials were synthesized in spherical and rod shapes with different aspect ratios. These particles were characterized by optical absorption measurements, scanning electron microscopy, high-resolution transmission electorn microscopy, and fluorescence spectroscopy. Methods were developed to functionalize these nanoparticles with thermally stable surface coatings using emulsion polymerization. A new method to control the size and spatial distribution of vertically aligned carbon nanofibers was developed, by intercalating nickel into a polymer film. Nanofibers were subsequently grown using plasma-enhanced chemical vapor deposition, and the properties of the nanofibers were characterized using TEM and electrochemical methods. The alignment of block copolymers normal to a dielectric thin film was demonstrated using AC electric fields. These studies demonstrated the underlying mechanism by which nanoscopic structure in thin films can be

  6. Graphene-based organic-inorganic hybrids with optoelectronic and magneto-optic functions (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Lee, Kwang-Sup; Kim, Sung-Hyun; Jung, Juhyoung; Teng, Xue-Cheng; Prabhakaran, Prem

    2017-02-01

    Groups around the world are pursuing optoelctronic and magneto-optic properties of graphene-based materials since they hold a lot of promise for future technologies. Quantum dot (QD) decorated graphenic nanohybrids can be candidates for demonstrating energy transfer, while magnetic nanoparticles (MNPs) on graphene give rise to interesting electronic phenomena like magneto-optical effects. Graphene containing MNPs are also good candidates for exploring quantum-hall effect. In medicine these materials have demonstrated applications in bioimaging, drug delivery, photothermal treatment and magnetic resonance imaging. A majority of groups working on QD or MNPs have focused on chemical functionalization methods for making graphene-MNP nanohybrids. We have developed a set of small molecule as well as polymeric ligands for noncovalent self-assembly of nanoparticles on graphene. The ligands contain pyrene as an anchor group for graphene and also thiol or dipamine as anchor groups for QD or MNPs. In this presentation we discuss the synthesis and characterization of these materials and outline some early results regarding exploratory device fabrication involving these materials.

  7. Gold nanoparticles-induced enhancement of the analytical response of an electrochemical biosensor based on an organic-inorganic hybrid composite material.

    PubMed

    Barbadillo, M; Casero, E; Petit-Domínguez, M D; Vázquez, L; Pariente, F; Lorenzo, E

    2009-12-15

    The design and characterization of a new organic-inorganic hybrid composite material for glucose electrochemical sensing are described. This material is based on the entrapment of both gold nanoparticles (AuNPs) and glucose oxidase, which was chosen as a model, into a sol-gel matrix. The addition of spectroscopic grade graphite to this system, which confers conductivity, leads to the development of a material particularly attractive for electrochemical biosensor fabrication. The characterization of the hybrid composite material was performed using atomic force microscopy and scanning electron microscopy techniques. This composite material was applied to the determination of glucose in presence of hydroxymethylferrocene as a redox mediator. The system exhibits a clear electrocatalytic activity towards glucose, allowing its determination at 250 mV vs Ag/AgCl. The performance of the resulting enzyme biosensor was evaluated in terms of sensitivity, detection limit, linear response range, stability and accuracy. Finally, the enhancement of the analytical response of the resulting biosensor induced by the presence of gold nanoparticles was evaluated by comparison with a similar organic-inorganic hybrid composite material without AuNPs.

  8. Ampholine-functionalized hybrid organic-inorganic silica material as sorbent for solid-phase extraction of acidic and basic compounds.

    PubMed

    Wang, Tingting; Chen, Yihui; Ma, Junfeng; Chen, Mingliang; Nie, Chenggang; Hu, Minjie; Li, Ying; Jia, Zhijian; Fang, Jianghua; Gao, Haoqi

    2013-09-20

    A novel sorbent for solid-phase extraction (SPE) was synthesized by chemical immobilization of ampholine on hybrid organic-inorganic silica material. The ampholine-functionalized hybrid organic-inorganic silica sorbent is consisted of aliphatic amine groups, carboxyl groups and long carbon chains, allowing for extraction of both acidic and basic compounds. The retention properties of the developed sorbent were evaluated for 1-hydroxy-2-naphthoic acid (HNA), 1-naphthoic acid (NA), 3-hydroxybenzoic acid (HBA), benzoic acid (BA), sorbic acid (SA), vanillic aldehyde (VA), butyl 4-hydroxybenzoate (BHB), propyl 4-hydroxybenzoate (PHB), ethyl 4-hydroxybenzoate (EHB), and methyl 4-hydroxybenzoate (MHB). The results show that such a sorbent has three types of interaction, i.e., electrostatic interaction, hydrophobic interaction, and hydrogen bonding, exhibiting high extraction efficiency towards the compounds tested. The adsorption capacities of the analytes ranged from 0.61 to 6.54μgmg(-1). The reproducibility of the sorbent preparation was evaluated at three spiking concentration levels, with relative standard deviations (RSDs) of 1.0-10.5%. The recoveries of ten acidic and basic compounds spiked in beverage Coca-Cola(®) sample ranged from 82.5% to 98.2% with RSDs less than 5.8%. Under optimum conditions, the ampholine-functionalized hybrid organic-inorganic silica sorbent rendered higher extraction efficiency for acidic compounds than that of the commercially available ampholine-functionalized silica particles, and was comparable to that of the commercial Oasis WAX and Oasis WCX.

  9. A magnetic organic-inorganic composite: Synthesis and characterization of magnetic 5-aminosalicylic acid intercalated layered double hydroxides

    SciTech Connect

    Zhang Hui . E-mail: huizhang67@gst21.com; Zou Kang; Sun Hui; Duan Xue . E-mail: duanx@mail.buct.edu.cn

    2005-11-15

    A core-shell structured magnetic layered organic-inorganic material involving 5-aminosalicylic acid (5-ASA) intercalated Zn-Al layered double hydroxides (LDHs) and magnesium ferrite (MgFe{sub 2}O{sub 4}) is assembled by a coprecipitation method. The powder X-ray diffraction results show the coexistence of the clear but weak diffractions of MgFe{sub 2}O{sub 4} and ordered relatively stronger reflections of 5-ASA intercalated LDHs. The TEM image of magnetic 5-ASA intercalated LDHs reveals that the LDHs layer covers the MgFe{sub 2}O{sub 4} particles or their aggregates with particle size of 50-80 nm. The vibration sample magnetization (VSM) measurements exhibit the increase in saturation magnetization of magnetic 5-ASA intercalated LDHs samples with increasing amount of magnetic core. The XPS analyses account for a majority of Zn, Al and O atoms on the surface of magnetic particles. It is suggested that the magnetic core MgFe{sub 2}O{sub 4} was coated with LDHs layer probably through Zn-O-Mg and Al-O-Mg linkages, and a core-shell structured model is tentatively proposed.

  10. Development of a sodium alginate-based organic/inorganic superabsorbent composite hydrogel for adsorption of methylene blue.

    PubMed

    Thakur, Sourbh; Pandey, Sadanand; Arotiba, Omotayo A

    2016-11-20

    Batch adsorption experiments were carried out for the removal of methylene blue (MB) cationic dye from aqueous solution using organic/inorganic hydrogel nanocomposite of titania incorporated sodium alginate crosslinked polyacrylic acid (SA-cl-poly(AA)-TiO2). The hydrogel was prepared by graft copolymerization of acrylic acid (AA) onto sodium alginate (SA) biopolymer in the presence of a crosslinking agent, a free radical initiator and TiO2 nanoparticles. The hydrogel exhibited a high swelling capacity of 412.98g/g. The factors influencing adsorption capacity of the absorbents such as pH of the dye solutions, initial concentration of the dye, amount of absorbents, and temperature were investigated and used to propose a possible mechanism of adsorption. The adsorption process concurs with a pseudo-second-order kinetics and with Langmuir isotherm equation. A very high adsorption capacity (Qmax=2257.36 (mg/g)) and a correlation coefficient of 0.998 calculated from isotherm equations show the high efficiency of the absorbent and thus expected to be a good candidate as an absorbent for water treatment.

  11. A magnetic organic inorganic composite: Synthesis and characterization of magnetic 5-aminosalicylic acid intercalated layered double hydroxides

    NASA Astrophysics Data System (ADS)

    Zhang, Hui; Zou, Kang; Sun, Hui; Duan, Xue

    2005-11-01

    A core-shell structured magnetic layered organic-inorganic material involving 5-aminosalicylic acid (5-ASA) intercalated Zn-Al layered double hydroxides (LDHs) and magnesium ferrite (MgFe 2O 4) is assembled by a coprecipitation method. The powder X-ray diffraction results show the coexistence of the clear but weak diffractions of MgFe 2O 4 and ordered relatively stronger reflections of 5-ASA intercalated LDHs. The TEM image of magnetic 5-ASA intercalated LDHs reveals that the LDHs layer covers the MgFe 2O 4 particles or their aggregates with particle size of 50-80 nm. The vibration sample magnetization (VSM) measurements exhibit the increase in saturation magnetization of magnetic 5-ASA intercalated LDHs samples with increasing amount of magnetic core. The XPS analyses account for a majority of Zn, Al and O atoms on the surface of magnetic particles. It is suggested that the magnetic core MgFe 2O 4 was coated with LDHs layer probably through Zn-O-Mg and Al-O-Mg linkages, and a core-shell structured model is tentatively proposed.

  12. Structural Peculiarities of Ion-Conductive Organic-Inorganic Polymer Composites Based on Aliphatic Epoxy Resin and Salt of Lithium Perchlorate.

    PubMed

    Matkovska, Liubov; Iurzhenko, Maksym; Mamunya, Yevgen; Tkachenko, Igor; Demchenko, Valeriy; Synyuk, Volodymyr; Shadrin, Andriy; Boiteux, Gisele

    2017-12-01

    The article is concerned with hybrid amorphous polymers synthesized basing on epoxy oligomer of diglycide aliphatic ester of polyethylene glycol that was cured by polyethylene polyamine and lithium perchlorate salt. Structural peculiarities of organic-inorganic polymer composites were studied by differential scanning calorimetry, wide-angle X-ray spectra, infrared spectroscopic, scanning electron microscopy, elemental analysis, and transmission and reflective optical microscopy. On the one hand, the results showed that the introduction of LiClO4 salt into epoxy polymer leads to formation of the coordinative metal-polymer complexes of donor-acceptor type between central Li(+) ion and ligand. On the other hand, the appearance of amorphous microinclusions, probably of inorganic nature, was also found.

  13. Structural Peculiarities of Ion-Conductive Organic-Inorganic Polymer Composites Based on Aliphatic Epoxy Resin and Salt of Lithium Perchlorate

    NASA Astrophysics Data System (ADS)

    Matkovska, Liubov; Iurzhenko, Maksym; Mamunya, Yevgen; Tkachenko, Igor; Demchenko, Valeriy; Synyuk, Volodymyr; Shadrin, Andriy; Boiteux, Gisele

    2017-06-01

    The article is concerned with hybrid amorphous polymers synthesized basing on epoxy oligomer of diglycide aliphatic ester of polyethylene glycol that was cured by polyethylene polyamine and lithium perchlorate salt. Structural peculiarities of organic-inorganic polymer composites were studied by differential scanning calorimetry, wide-angle X-ray spectra, infrared spectroscopic, scanning electron microscopy, elemental analysis, and transmission and reflective optical microscopy. On the one hand, the results showed that the introduction of LiClO4 salt into epoxy polymer leads to formation of the coordinative metal-polymer complexes of donor-acceptor type between central Li+ ion and ligand. On the other hand, the appearance of amorphous microinclusions, probably of inorganic nature, was also found.

  14. Polyaspartic acid facilitates oxolation within iron(iii) oxide pre-nucleation clusters and drives the formation of organic-inorganic composites

    NASA Astrophysics Data System (ADS)

    Scheck, J.; Drechsler, M.; Ma, X.; Stöckl, M. T.; Konsek, J.; Schwaderer, J. B.; Stadler, S. M.; De Yoreo, J. J.; Gebauer, D.

    2016-12-01

    The interplay between polymers and inorganic minerals during the formation of solids is crucial for biomineralization and bio-inspired materials, and advanced material properties can be achieved with organic-inorganic composites. By studying the reaction mechanisms, basic questions on organic-inorganic interactions and their role during material formation can be answered, enabling more target-oriented strategies in future synthetic approaches. Here, we present a comprehensive study on the hydrolysis of iron(iii) in the presence of polyaspartic acid. For the basic investigation of the formation mechanism, a titration assay was used, complemented by microscopic techniques. The polymer is shown to promote precipitation in partly hydrolyzed reaction solutions at the very early stages of the reaction by facilitating iron(iii) hydrolysis. In unhydrolyzed solutions, no significant interactions between the polymer and the inorganic solutes can be observed. We demonstrate that the hydrolysis promotion by the polymer can be understood by facilitating oxolation in olation iron(iii) pre-nucleation clusters. We propose that the adsorption of olation pre-nucleation clusters on the polymer chains and the resulting loss in dynamics and increased proximity of the reactants is the key to this effect. The resulting composite material obtained from the hydrolysis in the presence of the polymer was investigated with additional analytical techniques, namely, scanning and transmission electron microscopies, light microscopy, atomic force microscopy, zeta potential measurements, dynamic light scattering, and thermogravimetric analyses. It consists of elastic, polydisperse nanospheres, ca. 50-200 nm in diameter, and aggregates thereof, exhibiting a high polymer and water content.

  15. Poly(ε-caprolactone) reinforced with sol-gel synthesized organic-inorganic hybrid fillers as composite substrates for tissue engineering.

    PubMed

    Russo, Teresa; Gloria, Antonio; D-Antò, Vincenzo; D'Amora, Ugo; Ametrano, Gianluca; Bollino, Flavia; De Santis, Roberto; Ausanio, Giovanni; Catauro, Michelina; Rengo, Sandro; Ambrosio, Luigi

    2010-01-01

    The importance of polymer-based composite materials to make multifunctional substrates for tissue engineering and the strategies to improve their performances have been stressed in the literature. Bioactive features of sol-gel synthesized poly(ε-caprolactone)/TiO₂ or poly(ε-caprolactone)/ZrO₂ organic-inorganic hybrid materials are widely documented. Accordingly, the aim of this preliminary research was to develop advanced composite substrates consisting of a poly(ε-caprolactone) matrix reinforced with sol-gel synthesized PCL/TiO₂ or PCL/ZrO₂ hybrid fillers. Micro-computed tomography and atomic force microscopy analyses allowed to study surface topography and roughness. On the other hand, mechanical and biological performances were evaluated by small punch tests and Alamar Blue™ assay, respectively. Micro-computed tomography and atomic force microscopy analyses highlighted the effect of the preparation technique. Results from small punch tests and Alamar Blue™ assay evidenced that PCL reinforced with Ti2 (PCL=12, TiO₂=88 wt%) and Zr2 (PCL=12, ZrO₂=88 wt%) hybrid fillers provided better mechanical and biological performances. PCL reinforced with Ti2 (PCL=12, TiO₂=88 wt%) and Zr2 (PCL=12, ZrO₂=88 wt%) hybrid fillers could be considered as advanced composite substrates for hard tissue engineering.

  16. Air stable organic-inorganic nanoparticles hybrid solar cells

    SciTech Connect

    Qian, Lei; Yang, Jihua; Xue, Jiangeng; Holloway, Paul H.

    2015-09-29

    A solar cell includes a low work function cathode, an active layer of an organic-inorganic nanoparticle composite, a ZnO nanoparticle layer situated between and physically contacting the cathode and active layers; and a transparent high work function anode that is a bilayer electrode. The inclusion of the ZnO nanoparticle layer results in a solar cell displaying a conversion efficiency increase and reduces the device degradation rate. Embodiments of the invention are directed to novel ZnO nanoparticles that are advantageous for use as the ZnO nanoparticle layers of the novel solar cells and a method to prepare the ZnO nanoparticles.

  17. Co-functionalized organic/inorganic hybrid ZnO nanorods as electron transporting layers for inverted organic solar cells.

    PubMed

    Ambade, Swapnil B; Ambade, Rohan B; Eom, Seung Hun; Baek, Myung-Jin; Bagde, Sushil S; Mane, Rajaram S; Lee, Soo-Hyoung

    2016-03-07

    In an unprecedented attempt, we present an interesting approach of coupling solution processed ZnO planar nanorods (NRs) by an organic small molecule (SM) with a strong electron withdrawing cyano moiety and the carboxylic group as binding sites by a facile co-functionalization approach. Direct functionalization by SMs (SM-ZnO NRs) leads to higher aggregation owing to the weaker solubility of SMs in solutions of ZnO NRs dispersed in chlorobenzene (CB). A prior addition of organic 2-(2-methoxyethoxy)acetic acid (MEA) over ZnO NRs not only inhibits aggregation of SMs over ZnO NRs, but also provides enough sites for the SM to strongly couple with the ZnO NRs to yield transparent SM-MEA-ZnO NRs hybrids that exhibited excellent capability as electron transporting layers (ETLs) in inverted organic solar cells (iOSCs) of P3HT:PC60BM bulk-heterojunction (BHJ) photoactive layers. A strongly coupled SM-MEA-ZnO NR hybrid reduces the series resistance by enhancing the interfacial area and tunes the energy level alignment at the interface between the (indium-doped tin oxide, ITO) cathode and BHJ photoactive layers. A significant enhancement in power conversion efficiency (PCE) was achieved for iOSCs comprising ETLs of SM-MEA-ZnO NRs (3.64%) advancing from 0.9% for pristine ZnO NRs, while the iOSCs of aggregated SM-ZnO NRs ETL exhibited a much lower PCE of 2.6%, thus demonstrating the potential of the co-functionalization approach. The superiority of the co-functionalized SM-MEA-ZnO NRs ETL is also evident from the highest PCE of 7.38% obtained for the iOSCs comprising BHJ of PTB7-Th:PC60BM compared with extremely poor 0.05% for non-functionalized ZnO NRs.

  18. Co-functionalized organic/inorganic hybrid ZnO nanorods as electron transporting layers for inverted organic solar cells

    NASA Astrophysics Data System (ADS)

    Ambade, Swapnil B.; Ambade, Rohan B.; Eom, Seung Hun; Baek, Myung-Jin; Bagde, Sushil S.; Mane, Rajaram S.; Lee, Soo-Hyoung

    2016-02-01

    In an unprecedented attempt, we present an interesting approach of coupling solution processed ZnO planar nanorods (NRs) by an organic small molecule (SM) with a strong electron withdrawing cyano moiety and the carboxylic group as binding sites by a facile co-functionalization approach. Direct functionalization by SMs (SM-ZnO NRs) leads to higher aggregation owing to the weaker solubility of SMs in solutions of ZnO NRs dispersed in chlorobenzene (CB). A prior addition of organic 2-(2-methoxyethoxy)acetic acid (MEA) over ZnO NRs not only inhibits aggregation of SMs over ZnO NRs, but also provides enough sites for the SM to strongly couple with the ZnO NRs to yield transparent SM-MEA-ZnO NRs hybrids that exhibited excellent capability as electron transporting layers (ETLs) in inverted organic solar cells (iOSCs) of P3HT:PC60BM bulk-heterojunction (BHJ) photoactive layers. A strongly coupled SM-MEA-ZnO NR hybrid reduces the series resistance by enhancing the interfacial area and tunes the energy level alignment at the interface between the (indium-doped tin oxide, ITO) cathode and BHJ photoactive layers. A significant enhancement in power conversion efficiency (PCE) was achieved for iOSCs comprising ETLs of SM-MEA-ZnO NRs (3.64%) advancing from 0.9% for pristine ZnO NRs, while the iOSCs of aggregated SM-ZnO NRs ETL exhibited a much lower PCE of 2.6%, thus demonstrating the potential of the co-functionalization approach. The superiority of the co-functionalized SM-MEA-ZnO NRs ETL is also evident from the highest PCE of 7.38% obtained for the iOSCs comprising BHJ of PTB7-Th:PC60BM compared with extremely poor 0.05% for non-functionalized ZnO NRs.In an unprecedented attempt, we present an interesting approach of coupling solution processed ZnO planar nanorods (NRs) by an organic small molecule (SM) with a strong electron withdrawing cyano moiety and the carboxylic group as binding sites by a facile co-functionalization approach. Direct functionalization by SMs (SM

  19. Hybrid organic-inorganic silica monolith with hydrophobic/strong cation-exchange functional groups as a sorbent for micro-solid phase extraction.

    PubMed

    Zheng, Ming-Ming; Ruan, Ge-Deng; Feng, Yu-Qi

    2009-11-06

    A hybrid organic-inorganic silica monolith with hydrophobic and strong cation-exchange functional groups was prepared and used as a sorbent for micro-solid phase extraction (micro-SPE). The hybrid silica monolith functionalized with octyl and thiol groups was conveniently synthesized by hydrolysis and polycondensation of a mixture of tetraethoxysilane (TEOS), n-octyltriethoxysilane (C8-TEOS) and 3-mercaptopropyltrimethoxysilane (MPTMS) via a two-step catalytic sol-gel process. Due to the favorable chemical reactivity of mercapto pendant moieties, the obtained hybrid monolith was oxidized using hydrogen peroxide (30%, w/w) to yield sulfonic acid groups, which provided strong cation-exchange sites. The obtained hybrid monolith was characterized by diffused infrared spectroscopy, elemental analysis, scanning electron microscopy and mercury intrusion porosimetry. The results show that the resulting monolith contains much higher carbon (31.6%) and sulfur (4.8%) contents than traditionally bonded silica materials. The extraction performance of the hybrid monolith was evaluated using sulfonamides as testing analytes by micro-SPE on-line coupled to HPLC. The results show that the hybrid monolith with hydrophobic and strong cation-exchange functional groups exhibits high extraction efficiency towards the testing analytes. The column-to-column RSD values were 1.3-9.8% for the extraction of SAs investigated. The extraction performance of the hybrid silica monolith remained practically unchanged after treated with acid (pH 1.0) and basic solutions (pH 10.5). Finally, the application of the hybrid monolith was demonstrated by micro-SPE of sulfonamide residues from milk followed by HPLC-UV analysis. The limits of detection (S/N=3) for eight SAs were found to be 1.0-3.0ng/mL in milk. The recoveries of eight SAs spiked in milk sample ranged from 80.2% to 115.6%, with relative standard deviations less than 11.8%.

  20. Nanoscale investigation of organic - inorganic halide perovskites

    NASA Astrophysics Data System (ADS)

    Cacovich, S.; Divitini, G.; Vrućinić, M.; Sadhanala, A.; Friend, R. H.; Sirringhaus, H.; Deschler, F.; Ducati, C.

    2015-10-01

    Over the last few years organic - inorganic halide perovskite-based solar cells have exhibited a rapid evolution, reaching certified power conversion efficiencies now surpassing 20%. Nevertheless the understanding of the optical and electronic properties of such systems on the nanoscale is still an open problem. In this work we investigate two model perovskite systems (based on iodine - CH3NH3PbI3 and bromine - CH3NH3PbBr3), analysing the local elemental composition and crystallinity and identifying chemical inhomogeneities.

  1. Influence of membrane structure on the operating current densities of non-aqueous redox flow batteries: Organic-inorganic composite membranes based on a semi-interpenetrating polymer network

    NASA Astrophysics Data System (ADS)

    Shin, Sung-Hee; Kim, Yekyung; Yun, Sung-Hyun; Maurya, Sandip; Moon, Seung-Hyeon

    2015-11-01

    We develop three types of organic-inorganic composite membranes based on a semi-interpenetrating polymer network (SIPN) to explore the effects of membrane structure on the possible operating current densities of a non-aqueous redox flow battery (RFB) system. Poly(vinylidene fluoride) (PVdF) is selected as a supporting polymer matrix for improving the chemical and thermal stability of the organic-inorganic composite membranes. We also introduce silica nanoparticles (5 wt% of PVdF) into the membranes to ensure the low crossover of active species. The fabrication of SIPN through the addition of glycidyl methacrylate, 4-vinylpyridine, or N-vinylcarbazole enables control of the membrane structure. Depending on monomer type, the membrane structure is determined to be either aliphatic or aromatic in terms of chemical properties and either dense or porous in terms of physical properties. These chemical and physical structures affect the electrochemical properties that correspond to charge/discharge performance and to the range of possible operating current densities. An important requirement is to examine charge/discharge performance at the possible range of operating current densities by using various membrane structures. This requirement is discussed in relation to a proposed design strategy for non-aqueous RFB membranes.

  2. Reinvestigation of hybrid organic-inorganic materials based on molybdate and piperazininum cations: Influence of the synthesis conditions on the chemical composition and characterizations of the photochromic properties

    SciTech Connect

    Coue, Violaine; Dessapt, Remi Bujoli-Doeuff, Martine; Evain, Michel; Jobic, Stephane

    2008-05-15

    The reactivity of the [Mo{sub 7}O{sub 24}]{sup 6-} anion towards the structure directing-reagent piperazine (pipz) has been investigated and new synthetic routes to achieve the known (H{sub 2}pipz){sub 3}[Mo{sub 8}O{sub 27}] 1, (H{sub 2}pipz)[Mo{sub 3}O{sub 10}].H{sub 2}O 2, and (H{sub 2}pipz)[Mo{sub 5}O{sub 16}] 3 molybdenum(VI) containing compounds are proposed. The role of the pH on the stabilization of the different compounds and their interconversion pathways is discussed. Compounds 1 and 2 show photochromic behavior under UV excitation, related to the particular organization of the organic component around the mineral framework. Their optical properties are reported and commented. - Graphical abstract: Three organic-inorganic hybrid materials have been prepared from the investigations of the [Mo{sub 7}O{sub 24}]{sup 6-}/piperazine system in hydrothermal conditions. The role of the pH on the stabilization of the different polyoxomolybdate blocks in the materials i.e. 1/({infinity}) [Mo{sub 3}O{sub 10}]{sup 2-} and 1/({infinity}) [Mo{sub 8}O{sub 27}]{sup 6-} chains and 2/({infinity}) [Mo{sub 5}O{sub 16}]{sup 2-} layer has been investigated.

  3. Ion conducting organic/inorganic hybrid polymers

    NASA Technical Reports Server (NTRS)

    Meador, Maryann B. (Inventor); Kinder, James D. (Inventor)

    2010-01-01

    This invention relates to a series of organic/inorganic hybrid polymers that are easy to fabricate into dimensionally stable films with good ion-conductivity over a wide range of temperatures for use in a variety of applications. The polymers are prepared by the reaction of amines, preferably diamines and mixtures thereof with monoamines with epoxy-functionalized alkoxysilanes. The products of the reaction are polymerized by hydrolysis of the alkoxysilane groups to produce an organic-containing silica network. Suitable functionality introduced into the amine and alkoxysilane groups produce solid polymeric membranes which conduct ions for use in fuel cells, high-performance solid state batteries, chemical sensors, electrochemical capacitors, electro-chromic windows or displays, analog memory devices and the like.

  4. Zero-Dimensional Hybrid Organic-Inorganic Halide Perovskite Modeling: Insights from First Principles.

    PubMed

    Giorgi, Giacomo; Yamashita, Koichi

    2016-03-03

    We discuss the properties of zero dimensional (cluster) hybrid organic-inorganic halide perovskite in view of their possible applicability in photovoltaics, light-emitting, and lasing devices. To support the need of theoretical investigations of such systems and pave the way for future investigations of clusters with different orientations, terminations, and compositions, we have assembled and characterized some zero dimensional models of methylammonium lead iodide, MAPbI3, by "cutting" its bulk. Interesting properties of such clusters that have been here theoretically investigated include their charge distribution, bandgap, wave function localization, and reduced effective mass. The surface orientation/termination and the organic/inorganic cation ratios have been discussed together with the roles they play in determining the electronic properties of such clusters. Also in agreement with experiments, it emerges that surface termination is crucial in determining the structural and optoelectronic properties of this largely overlooked, dimensionally reduced class of materials. Analogies and differences between clusters and bulk are discussed.

  5. Hyperbranched polymers and dendrimers as templates for organic/inorganic hybrid nanomaterials.

    PubMed

    Huang, Xinhua; Zheng, Sudan; Kim, Il

    2014-02-01

    This paper reviews the recent research and development of hyperbranched polymers (HPs) and dendrimers, and their use as templates for organic-inorganic hybrid nanomaterials. Hyperbranched polymers (HPs) are highly branched macromolecules with three-dimensional globular structures featuring unique properties such as low viscosity, high solubility, and a large number of terminal functional groups compared to their linear analogs. They are easily prepared by (1) condensation polymerization, (2) self-condensing vinyl copolymerization (SCVCP), and (3) ring-opening multibranch polymerization methods. Organic-inorganic hybrid nanomaterials are synthesized by a template approach using HPs/dendrimers. Monometallic, bimetallic (alloy and core/shell), semiconductor, and metal oxide nanoparticles have been prepared by this route. The dendrimer component of these composites serves not only as a template for preparing the nanoparticles but also as a stabilizer for the nanoparticles.

  6. Ion-Conducting Organic/Inorganic Polymers

    NASA Technical Reports Server (NTRS)

    Kinder, James D.; Meador, Mary Ann B.

    2007-01-01

    Ion-conducting polymers that are hybrids of organic and inorganic moieties and that are suitable for forming into solid-electrolyte membranes have been invented in an effort to improve upon the polymeric materials that have been used previously for such membranes. Examples of the prior materials include perfluorosulfonic acid-based formulations, polybenzimidazoles, sulfonated polyetherketone, sulfonated naphthalenic polyimides, and polyethylene oxide (PEO)-based formulations. Relative to the prior materials, the polymers of the present invention offer greater dimensional stability, greater ease of formation into mechanically resilient films, and acceptably high ionic conductivities over wider temperature ranges. Devices in which films made of these ion-conducting organic/inorganic polymers could be used include fuel cells, lithium batteries, chemical sensors, electrochemical capacitors, electrochromic windows and display devices, and analog memory devices. The synthesis of a polymer of this type (see Figure 1) starts with a reaction between an epoxide-functionalized alkoxysilane and a diamine. The product of this reaction is polymerized by hydrolysis and condensation of the alkoxysilane group, producing a molecular network that contains both organic and inorganic (silica) links. The silica in the network contributes to the ionic conductivity and to the desired thermal and mechanical properties. Examples of other diamines that have been used in the reaction sequence of Figure 1 are shown in Figure 2. One can use any of these diamines or any combination of them in proportions chosen to impart desired properties to the finished product. Alternatively or in addition, one could similarly vary the functionality of the alkoxysilane to obtain desired properties. The variety of available alkoxysilanes and diamines thus affords flexibility to optimize the organic/inorganic polymer for a given application.

  7. Sulfonic acid-functionalized hybrid organic-inorganic proton exchange membranes synthesized by sol-gel using 3-mercaptopropyl trimethoxysilane (MPTMS)

    NASA Astrophysics Data System (ADS)

    Mosa, J.; Durán, A.; Aparicio, M.

    2015-11-01

    Organic/inorganic hybrid membranes based on (3-glycidoxypropyl) trimethoxysilane (GPTMS) and 3-mercaptopropyl trimethoxysilane (MPTMS) have been prepared by sol-gel method and organic polymerisation, as candidate materials for proton exchange membranes in direct alcohol fuel cell (DMFC) applications. The -SH groups of MPTMS are oxidized to sulfonic acid groups, which are attributed to enhance the proton conductivity of hybrid membranes. FTIR, XPS and contact angle were used to characterize and confirm the hybrid structure and oxidation reaction progress. Membranes characterization also includes ion exchange capacity, water uptake, methanol permeability and proton conductivity to confirm their applicability in fuel cells. All the membranes were homogeneous and thermally and chemically resistant. In particular, the hybrid membranes demonstrated proton conductivities as high as 0.16 S cm-1 at high temperature, while exhibiting a low methanol permeability as compared to Nafion®. These results are associated with proton conducting paths through the silica pseudo-PEO network in which sulfonic acid groups work as proton donor.

  8. Preparation and applications of hybrid organic-inorganic monoliths: a review.

    PubMed

    Zhu, Tao; Row, Kyung Ho

    2012-06-01

    This review presents an overview of the properties of hybrid organic-inorganic monolithic materials and summarizes the recent developments in the preparation and applications of these hybrid monolithic materials. Hybrid monolithic materials with porosities, surface functionalities, and fast dynamic transport have developed rapidly, and have been used in a wide range of applications owing to the low cost, good stability, and excellent performance. Basically, these materials can be divided into two major types according to the chemical composition: hybrid silica-based monolith (HSM) and hybrid polymer-based monolith (HPM). Compared to the HPM, HSM monolith has been attracting most wide attentions, and it is commonly synthesized by the sol-gel process. The conventional preparation procedures of two type's hybrid organic-inorganic monoliths are addressed. Applications of hybrid organic-inorganic monoliths in optical devices, capillary microextraction (CME), capillary electrochromatography (CEC), high performance liquid chromatography (HPLC), and chiral separation are also reviewed. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. A hybrid organic-inorganic perovskite dataset

    NASA Astrophysics Data System (ADS)

    Kim, Chiho; Huan, Tran Doan; Krishnan, Sridevi; Ramprasad, Rampi

    2017-05-01

    Hybrid organic-inorganic perovskites (HOIPs) have been attracting a great deal of attention due to their versatility of electronic properties and fabrication methods. We prepare a dataset of 1,346 HOIPs, which features 16 organic cations, 3 group-IV cations and 4 halide anions. Using a combination of an atomic structure search method and density functional theory calculations, the optimized structures, the bandgap, the dielectric constant, and the relative energies of the HOIPs are uniformly prepared and validated by comparing with relevant experimental and/or theoretical data. We make the dataset available at Dryad Digital Repository, NoMaD Repository, and Khazana Repository (http://khazana.uconn.edu/), hoping that it could be useful for future data-mining efforts that can explore possible structure-property relationships and phenomenological models. Progressive extension of the dataset is expected as new organic cations become appropriate within the HOIP framework, and as additional properties are calculated for the new compounds found.

  10. Nanoscale chemical tomography of buried organic-inorganic interfaces in the chiton tooth.

    PubMed

    Gordon, Lyle M; Joester, Derk

    2011-01-13

    Biological organisms possess an unparalleled ability to control the structure and properties of mineralized tissues. They are able, for example, to guide the formation of smoothly curving single crystals or tough, lightweight, self-repairing skeletal elements. In many biominerals, an organic matrix interacts with the mineral as it forms, controls its morphology and polymorph, and is occluded during mineralization. The remarkable functional properties of the resulting composites-such as outstanding fracture toughness and wear resistance-can be attributed to buried organic-inorganic interfaces at multiple hierarchical levels. Analysing and controlling such interfaces at the nanometre length scale is critical also in emerging organic electronic and photovoltaic hybrid materials. However, elucidating the structural and chemical complexity of buried organic-inorganic interfaces presents a challenge to state-of-the-art imaging techniques. Here we show that pulsed-laser atom-probe tomography reveals three-dimensional chemical maps of organic fibres with a diameter of 5-10 nm in the surrounding nano-crystalline magnetite (Fe(3)O(4)) mineral in the tooth of a marine mollusc, the chiton Chaetopleura apiculata. Remarkably, most fibres co-localize with either sodium or magnesium. Furthermore, clustering of these cations in the fibre indicates a structural level of hierarchy previously undetected. Our results demonstrate that in the chiton tooth, individual organic fibres have different chemical compositions, and therefore probably different functional roles in controlling fibre formation and matrix-mineral interactions. Atom-probe tomography is able to detect this chemical/structural heterogeneity by virtue of its high three-dimensional spatial resolution and sensitivity across the periodic table. We anticipate that the quantitative analysis and visualization of nanometre-scale interfaces by laser-pulsed atom-probe tomography will contribute greatly to our understanding not

  11. Organic-inorganic nano-composite films for photonic applications made by multi-beam multi-target pulsed laser deposition with remote control of the plume directions

    NASA Astrophysics Data System (ADS)

    Darwish, Abdalla M.; Moore, Shaelynn; Mohammed, Aziz; Alexander, Deonte'; Bastian, Tyler; Dorlus, Wydglif; Sarkisov, Sergey S.; Patel, Darayas N.; Mele, Paolo; Koplitz, Brent

    2016-09-01

    There has been an explosive interest in the technique of laser assisted deposition of polymer nano-composite films exploiting the matrix assisted pulsed laser evaporation (MAPLE) with regard to the polymer host as can be judged form recent publications.1-4 In MAPLE, a frozen solution of a polymer in a relatively volatile solvent is used as a laser target. The solvent and concentration are selected so that first, the polymer of interest can dissolve to form a dilute, particulate free solution, second, the majority of the laser energy is initially absorbed by the solvent molecules and not by the solute molecules, and third, there is no photochemical reaction between the solvent and the solute. The light-material interaction in MAPLE can be described as a photothermal process. The photon energy absorbed by the solvent is converted to thermal energy that causes the polymer to be heated but the solvent to vaporize. As the surface solvent molecules are evaporated into the gas phase, polymer molecules are exposed at the gas-target matrix interface. The polymer molecules attain sufficient kinetic energy through collective collisions with the evaporating solvent molecules, to be transferred into the gas phase. By careful optimization of the MAPLE deposition conditions (laser wavelength, repetition rate, solvent type, concentration, temperature, and background gas and gas pressure), this process can occur without any significant polymer decomposition. The MAPLE process proceeds layer-by-layer, depleting the target of solvent and polymer in the same concentration as the starting matrix. When a substrate is positioned directly in the path of the plume, a coating starts to form from the evaporated polymer molecules, while the volatile solvent molecules are evacuated by the pump from the deposition chamber. In case of fabrication of polymer nanocomposites, MAPLE targets are usually prepared as nano-colloids of the additives of interest in the initial polymer solutions. Mixing

  12. Vanadium-oxo based hybrid organic-inorganic copolymers

    SciTech Connect

    Campero, A.; Soto, A.M.; Maquet, J.; Sanchez, C.

    1996-12-31

    The authors describe the synthesis and characterization of hybrid organic-inorganic copolymer materials formed by the reaction of the transition metal alkoxide VO(OAm{sup t}){sub 3} with the chelating monomer ligand acetoacetoxyethylmethacrylate (AAEM). By the simultaneous induction of the organic and inorganic polymerization reactions, covalent bonds are formed between both types of interpenetrating components. The organic chelating moiety of AAEM is linked through its {beta}-diketo function to the vanadium-oxo species.

  13. Adhesion and growth of human bone marrow mesenchymal stem cells on precise-geometry 3D organic-inorganic composite scaffolds for bone repair.

    PubMed

    Chatzinikolaidou, Maria; Rekstyte, Sima; Danilevicius, Paulius; Pontikoglou, Charalampos; Papadaki, Helen; Farsari, Maria; Vamvakaki, Maria

    2015-03-01

    Engineering biomaterial scaffolds that promote attachment and growth of mesenchymal stem cells in three dimensions is a crucial parameter for successful bone tissue engineering. Towards this direction, a lot of research effort has focused recently into the development of three-dimensional porous scaffolds, aiming to elicit positive cellular behavior. However, the fabrication of three-dimensional tissue scaffolds with a precise geometry and complex micro- and nano-features, supporting cell in-growth remains a challenge. In this study we report on a positive cellular response of human bone marrow-derived (BM) mesenchymal stem cells (MSCs) onto hybrid material scaffolds consisting of methacryloxypropyl trimethoxysilane, zirconium propoxide, and 2-(dimethylamino)ethyl methacrylate (DMAEMA). First, we use Direct fs Laser Writing, a 3D scaffolding technology to fabricate the complex structures. Subsequently, we investigate the morphology, viability and proliferation of BM-MSCs onto the hybrid scaffolds and examine the cellular response from different donors. Finally, we explore the effect of the materials' chemical composition on cell proliferation, employing three different material surfaces: (i) a hybrid consisting of methacryloxypropyl trimethoxysilane, zirconium propoxide and 50mol% DMAEMA, (ii) a hybrid material comprising methacryloxypropyl trimethoxysilane and zirconium propoxide, and (iii) a purely organic polyDMAEMA. Our results show a strong adhesion of BM-MSCs onto the hybrid material containing 50% DMAEMA from the first 2h after seeding, and up to several days, and a proliferation increase after 14 and 21days, similar to the polystyrene control, independent of cell donor. These findings support the potential use of our proposed cell-material combination in bone tissue engineering.

  14. Heterogeneous Catalysis of Polyoxometalate Based Organic-Inorganic Hybrids.

    PubMed

    Ren, Yuanhang; Wang, Meiyin; Chen, Xueying; Yue, Bin; He, Heyong

    2015-03-31

    Organic-inorganic hybrid polyoxometalate (POM) compounds are a subset of materials with unique structures and physical/chemical properties. The combination of metal-organic coordination complexes with classical POMs not only provides a powerful way to gain multifarious new compounds but also affords a new method to modify and functionalize POMs. In parallel with the many reports on the synthesis and structure of new hybrid POM compounds, the application of these compounds for heterogeneous catalysis has also attracted considerable attention. The hybrid POM compounds show noteworthy catalytic performance in acid, oxidation, and even in asymmetric catalytic reactions. This review summarizes the design and synthesis of organic-inorganic hybrid POM compounds and particularly highlights their recent progress in heterogeneous catalysis.

  15. Organic-inorganic hybrid polymer-encapsulated magnetic nanobead catalysts.

    PubMed

    Arai, Takayoshi; Sato, Toru; Kanoh, Hirofumi; Kaneko, Katsumi; Oguma, Koichi; Yanagisawa, Akira

    2008-01-01

    A new strategy for the encapsulation of magnetic nanobeads was developed by using the in situ self-assembly of an organic-inorganic hybrid polymer. The hybrid polymer of {[Cu(bpy)(BF(4))(2)(H(2)O)(2)](bpy)}(n) (bpy=4,4'-bipyridine) was constructed on the surface of amino-functionalized magnetic beads and the resulting hybrid-polymer-encapsulated beads were utilized as catalysts for the oxidation of silyl enolates to provide the corresponding alpha-hydroxy carbonyl compounds in high yield. After the completion of the reaction, the catalyst was readily recovered by magnetic separation and the recovered catalyst could be reused several times. Because the current method did not require complicated procedures for incorporating the catalyst onto the magnetic beads, the preparation and the application of various other types of organic-inorganic hybrid-polymer-coated magnetic beads could be possible.

  16. Organic-Inorganic Hybrids Using Novel Phenylethynyl Imide Silanes

    NASA Technical Reports Server (NTRS)

    Park, C.; Lowther, S. E.; Smith, J. G., Jr.

    2001-01-01

    In this presentation, polyimide-silica hybrids using novel phenylethynyl imide silanes are reported. The phenylethynyl group is present in the organic precursor as either a pendent or an end group to bond chemically with the polyimide adhesive containing phenylethynyl groups during processing, while the silane group of the organic precursor would chemically react with the inorganic precursor through oxane bond formation. The chemical compositions of these novel hybrids were examined using X-ray mapping modes of scanning electron microscopy (SEM), which revealed a silicon gradient interphase between the high surface energy substrate and the polyimide adhesive. Novel aromatic phenylethynyl imide silanes (APEISs) and pendent phenylethynyl imide oligomeric disilanes (PPEIDSs) have been synthesized, and sol-gel solutions containing the new silanes, a phenylethynyl terminated imide oligomer (PETI-5), and an inorganic precursor were formulated to develop a gradient hybrid interphase between a titanium alloy and the adhesive. Two different sol-gel systems were investigated to develop organic-inorganic hybrids. Hybrid I was composed of an organic precursor containing both phenylethynyl and silane groups (PPEIDS) and an inorganic precursor. Functional group concentrations were controlled by the variation of the molecular weight of the imide backbone of PPEIDS. Hybrid II was composed of organic and inorganic precursors and a coupling agent containing both phenylethynyl and silane groups. Morphology and chemical composition of the hybrid interphase between the inorganic substrate and the adhesive were investigated, and the bond strength and durability were evaluated using lap shear tests at various conditions. The assessment of how the bonding at an interface is affected by various sol-gel solution compositions and environments is reported.

  17. New and extended parameterization of the thermodynamic model AIOMFAC: calculation of activity coefficients for organic-inorganic mixtures containing carboxyl, hydroxyl, carbonyl, ether, ester, alkenyl, alkyl, and aromatic functional groups

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Booth, A. M.; Lienhard, D. M.; Soonsin, V.; Krieger, U. K.; Topping, D. O.; McFiggans, G.; Peter, T.; Seinfeld, J. H.

    2011-05-01

    We present a new and considerably extended parameterization of the thermodynamic activity coefficient model AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients) at room temperature. AIOMFAC combines a Pitzer-like electrolyte solution model with a UNIFAC-based group-contribution approach and explicitly accounts for interactions between organic functional groups and inorganic ions. Such interactions constitute the salt-effect, may cause liquid-liquid phase separation, and affect the gas-particle partitioning of aerosols. The previous AIOMFAC version was parameterized for alkyl and hydroxyl functional groups of alcohols and polyols. With the goal to describe a wide variety of organic compounds found in atmospheric aerosols, we extend here the parameterization of AIOMFAC to include the functional groups carboxyl, hydroxyl, ketone, aldehyde, ether, ester, alkenyl, alkyl, aromatic carbon-alcohol, and aromatic hydrocarbon. Thermodynamic equilibrium data of organic-inorganic systems from the literature are critically assessed and complemented with new measurements to establish a comprehensive database. The database is used to determine simultaneously the AIOMFAC parameters describing interactions of organic functional groups with the ions H+, Li+, Na+, K+, NH4+, Mg2+, Ca2+, Cl-, Br-, NO3-, HSO4-, and SO42-. Detailed descriptions of different types of thermodynamic data, such as vapor-liquid, solid-liquid, and liquid-liquid equilibria, and their use for the model parameterization are provided. Issues regarding deficiencies of the database, types and uncertainties of experimental data, and limitations of the model, are discussed. The challenging parameter optimization problem is solved with a novel combination of powerful global minimization algorithms. A number of exemplary calculations for systems containing atmospherically relevant aerosol components are shown. Amongst others, we discuss aqueous mixtures of ammonium sulfate with

  18. New and extended parameterization of the thermodynamic model AIOMFAC: calculation of activity coefficients for organic-inorganic mixtures containing carboxyl, hydroxyl, carbonyl, ether, ester, alkenyl, alkyl, and aromatic functional groups

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Booth, A. M.; Lienhard, D. M.; Soonsin, V.; Krieger, U. K.; Topping, D. O.; McFiggans, G.; Peter, T.; Seinfeld, J. H.

    2011-09-01

    We present a new and considerably extended parameterization of the thermodynamic activity coefficient model AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients) at room temperature. AIOMFAC combines a Pitzer-like electrolyte solution model with a UNIFAC-based group-contribution approach and explicitly accounts for interactions between organic functional groups and inorganic ions. Such interactions constitute the salt-effect, may cause liquid-liquid phase separation, and affect the gas-particle partitioning of aerosols. The previous AIOMFAC version was parameterized for alkyl and hydroxyl functional groups of alcohols and polyols. With the goal to describe a wide variety of organic compounds found in atmospheric aerosols, we extend here the parameterization of AIOMFAC to include the functional groups carboxyl, hydroxyl, ketone, aldehyde, ether, ester, alkenyl, alkyl, aromatic carbon-alcohol, and aromatic hydrocarbon. Thermodynamic equilibrium data of organic-inorganic systems from the literature are critically assessed and complemented with new measurements to establish a comprehensive database. The database is used to determine simultaneously the AIOMFAC parameters describing interactions of organic functional groups with the ions H+, Li+, Na+, K+, NH4+, Mg2+, Ca2+, Cl-, Br-, NO3-, HSO4-, and SO42-. Detailed descriptions of different types of thermodynamic data, such as vapor-liquid, solid-liquid, and liquid-liquid equilibria, and their use for the model parameterization are provided. Issues regarding deficiencies of the database, types and uncertainties of experimental data, and limitations of the model, are discussed. The challenging parameter optimization problem is solved with a novel combination of powerful global minimization algorithms. A number of exemplary calculations for systems containing atmospherically relevant aerosol components are shown. Amongst others, we discuss aqueous mixtures of ammonium sulfate with

  19. Organic/Inorganic Complex Pigments: Ancient Colors Maya Blue

    SciTech Connect

    Polette-Niewold, L.A.; Manciu, F.S.; Torres, B.; Alvarado, M.; Jr.; Chianelli, R.R.

    2009-06-04

    Maya Blue is an ancient blue pigment composed of palygorskite clay and indigo. It was used by the ancient Maya and provides a dramatic background for some of the most impressive murals throughout Mesoamerica. Despite exposure to acids, alkalis, and chemical solvents, the color of the Maya Blue pigment remains unaltered. The chemical interaction between palygorskite and indigo form an organic/inorganic complex with the carbonyl oxygen of the indigo bound to a surface Al{sup 3+} in the Si-O lattice. In addition indigo will undergo an oxidation to dehydroindigo during preparation. The dehydro-indigo molecule forms a similar but stronger complex with the Al{sup 3+}. Thus, Maya Blue varies in color due to the mixed indigo/dehydroindigo complex. The above conclusions are the result of application of multiple techniques (X-ray diffraction, differential thermal analysis/thermal gravimetric analysis, high resolution transmission electron microscopy, scanning electron microscopy, infrared and Raman spectroscopy) to the characterization of the organic/inorganic complex. A picture of the bonding of the organic molecule to the palygorskite surface forming a surface complex is developed and supported by the results of density functional theory calculations. We also report that other organic molecules such as thioindigo form similar organic/inorganic complexes thus, opening an entirely new class of complex materials for future applications.

  20. Chemistry of Mesoporous Organosilica in Nanotechnology: Molecularly Organic-Inorganic Hybridization into Frameworks.

    PubMed

    Chen, Yu; Shi, Jianlin

    2016-05-01

    Organic-inorganic hybrid materials aiming to combine the individual advantages of organic and inorganic components while overcoming their intrinsic drawbacks have shown great potential for future applications in broad fields. In particular, the integration of functional organic fragments into the framework of mesoporous silica to fabricate mesoporous organosilica materials has attracted great attention in the scientific community for decades. The development of such mesoporous organosilica materials has shifted from bulk materials to nanosized mesoporous organosilica nanoparticles (designated as MONs, in comparison with traditional mesoporous silica nanoparticles (MSNs)) and corresponding applications in nanoscience and nanotechnology. In this comprehensive review, the state-of-art progress of this important hybrid nanomaterial family is summarized, focusing on the structure/composition-performance relationship of MONs of well-defined morphology, nanostructure, and nanoparticulate dimension. The synthetic strategies and the corresponding mechanisms for the design and construction of MONs with varied morphologies, compositions, nanostructures, and functionalities are overviewed initially. Then, the following part specifically concentrates on their broad spectrum of applications in nanotechnology, mainly in nanomedicine, nanocatalysis, and nanofabrication. Finally, some critical issues, presenting challenges and the future development of MONs regarding the rational synthesis and applications in nanotechnology are summarized and discussed. It is highly expected that such a unique molecularly organic-inorganic nanohybrid family will find practical applications in nanotechnology, and promote the advances of this discipline regarding hybrid chemistry and materials. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Photochromic organic-inorganic hybrid materials.

    PubMed

    Pardo, Rosario; Zayat, Marcos; Levy, David

    2011-02-01

    Photochromic organic-inorganic hybrid materials have attracted considerable attention owing to their potential application in photoactive devices, such as optical memories, windows, photochromic decorations, optical switches, filters or non-linear optics materials. The growing interest in this field has largely expanded the use of photochromic materials for the purpose of improving existing materials and exploring new photochromic hybrid systems. This tutorial review summarizes the design and preparation of photochromic hybrid materials, and particularly those based on the incorporation of organic molecules in organic-inorganic matrices by the sol-gel method. This is the most commonly used method for the preparation of these materials as it allows vitreous hybrid materials to be obtained at low temperatures, and controls the interaction between the organic molecule and its embedding matrix, and hence allows tailoring of the performance of the resulting devices.

  2. Anticorrosive organic/inorganic hybrid coatings

    NASA Astrophysics Data System (ADS)

    Gao, Tongzhai

    Organic/inorganic hybrid coating system was developed for anticorrosion applications using polyurea, polyurethane or epoxide as the organic phase and polysiloxane, formed by sol-gel process, as the inorganic phase. Polyurea/polysiloxane hybrid coatings were formulated and moisture cured using HDI isocyanurate, alkoxysilane-functionalized HDI isocyanurate, and tetraethyl orthosilicate (TEOS) oligomers. Two urethanes were prepared using the same components as abovementioned in addition to the oligoesters derived from either cyclohexane diacids (CHDA) and 2-butyl-2-ethyl-1,3-propanediol (BEPD) or adipic acid (AA), isophthalic acid (IPA), 1,6-hexanediol (HD), and trimethylol propane (TMP). Accelerated weathering and outdoor exposure were performed to study the weatherability of the polyurethane/polysiloxane hybrid coating system. FTIR and solid-state 13C NMR revealed that the degradation of the hybrid coatings occurred at the urethane and ester functionalities of the organic phase. DMA and DSC analyses showed the glass transition temperature increased and broadened after weathering. SEM was employed to observe the change of morphology of the hybrid coatings and correlated with the gloss variation after weathering. Rutile TiO2 was formulated into polyurethane/polysiloxane hybrid coatings in order to investigate the effect of pigmentation on the coating properties and the sol-gel precursor. Chemical interaction between the TiO2 and the sol-gel precursor was investigated using solid-state 29Si NMR and XPS. The morphology, mechanical, viscoelastic, thermal properties of the pigmented coatings were evaluated as a function of pigmentation volume concentration (PVC). Using AFM and SEM, the pigment were observed to be well dispersed in the polymer matrix. The thermal stability, the tensile modulus and strength of the coatings were enhanced with increasing PVC, whereas the pull-off adhesion and flexibility were reduced with increasing PVC. Finally, the pigmented coatings were

  3. Flexible Hybrid Organic-Inorganic Perovskite Memory.

    PubMed

    Gu, Chungwan; Lee, Jang-Sik

    2016-05-24

    Active research has been done on hybrid organic-inorganic perovskite materials for application to solar cells with high power conversion efficiency. However, this material often shows hysteresis, which is undesirable, shift in the current-voltage curve. The hysteresis may come from formation of defects and their movement in perovskite materials. Here, we utilize the defects in perovskite materials to be used in memory operations. We demonstrate flexible nonvolatile memory devices based on hybrid organic-inorganic perovskite as the resistive switching layer on a plastic substrate. A uniform perovskite layer is formed on a transparent electrode-coated plastic substrate by solvent engineering. Flexible nonvolatile memory based on the perovskite layer shows reproducible and reliable memory characteristics in terms of program/erase operations, data retention, and endurance properties. The memory devices also show good mechanical flexibility. It is suggested that resistive switching is done by migration of vacancy defects and formation of conducting filaments under the electric field in the perovskite layer. It is believed that organic-inorganic perovskite materials have great potential to be used in high-performance, flexible memory devices.

  4. SO3H-functionalized organic-inorganic ionic liquids based on polyoxometalates characterization and their application in Csbnd C coupling reaction

    NASA Astrophysics Data System (ADS)

    Rafiee, Ezzat; Mirnezami, Fakhrosadat; Kahrizi, Masoud

    2016-09-01

    Different ionic liquids (ILs) with SO3H as functional group were achieved by combining SO3H-functionalized organic cations and polyoxometalates (POM). The obtained salts were characterized and their catalytic activities investigated in Csbnd C coupling between benzhydrol and aromatic compounds at neat conditions, including the effect of organic cations, influence of POMs, optimization of reaction conditions, and reusability of the catalyst. Furthermore, Recovery, reusability and activity of ILs as heterogeneous catalysts were studied at least four times.

  5. A non-aqueous procedure to synthesize amino group bearing nanostructured organic-inorganic hybrid materials.

    PubMed

    Göring, M; Seifert, A; Schreiter, K; Müller, P; Spange, S

    2014-09-04

    Amino-functionalized organic-inorganic hybrid materials with a narrow distributed nanostructure of 2-4 nm in size were obtained by means of a template-free and non-aqueous procedure. Simultaneous twin polymerization of novel amino group containing twin monomers with 2,2'-spirobi[4H-1,3,2-benzodioxasiline] has been applied for this purpose. The amino groups of the organic-inorganic hybrid material are useful for post derivatization.

  6. Synthesis, sustained release properties of magnetically functionalized organic-inorganic materials: Amoxicillin anions intercalated magnetic layered double hydroxides via calcined precursors at room temperature

    NASA Astrophysics Data System (ADS)

    Wang, Jun; Liu, Qi; Zhang, Guangchun; Li, Zhanshuang; Yang, Piaoping; Jing, Xiaoyan; Zhang, Milin; Liu, Tianfu; Jiang, Zhaohua

    2009-09-01

    Zinc-aluminum-carbonate-layered double hydroxides (ZnAl-CO 3-LDHs), loaded with magnetic substrates (Fe 3O 4), were prepared for sustained drug-targeting delivery. From the X-ray diffraction results, it was found that the magnetic substrates were successfully incorporated with LDHs and highly dispersed in the hydrotalcite structure. After intercalation with an antibiotic drug (amoxicillin) by using a calcinations-reconstruction method, the basal spacing of layered double hydroxides increased from 7.51 Å to 12.35 Å, indicating that amoxicillin was successfully intercalated into the interlay space of LDHs as a monolayer. Furthermore, in vitro drug release experiments in pH 7.4 phosphate buffer solution (PBS) showed sustained release profiles with amoxicillin as a model drug. Magnetic measurements revealed that the composite possessed paramagnetic properties at room temperature.

  7. Photovoltaic performance of P3HT-porphyrin functionalized 1D CdS nanostructured organic inorganic bulk heterojunction hybrid solar cells

    NASA Astrophysics Data System (ADS)

    Jabeen, Uzma; Adhikari, Tham; Shah, Syed Mujtaba; Pathak, Dinesh; Wagner, Tomas; Nunzi, Jean-Michel

    2017-05-01

    Here we report first time the direct observation of the nucleation and growth process of cadmium sulfide (CdS) nanowires by stirring of CdS nanoparticles. The growth process of CdS nanowires consist of three steps, the growth of CdS particles, nucleation of CdS nanorods and finally the growth of CdS nanowires. This method brings forward a new idea to synthesize nanowires. The X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDAX), ultraviolet-visible (UV-Vis) and photoluminescence (PL) spectra have been provided for the characterization of the as-obtained nanowires. Furthermore, carboxylic functionalize porphyrin was examined as sensitizer for CdS nanowires. The interaction of porphyrin with CdS nanowires was investigated by absorption, infrared, steady state fluorescence spectroscopy and SEM techniques. The hybrid devices were fabricated with organic polymer with different concentration of dyes and the device with optimum concentration 6 × 10-6 M shows the highest efficiency of 0.5% with short-circuit current density 3.10 mA cm-2, open-circuit voltage 0.44 V and fill factor 0.37. Contribution to the topical issue "Materials for Energy harvesting, conversion and storage II (ICOME 2016)", edited by Jean-Michel Nunzi, Rachid Bennacer and Mohammed El Ganaoui

  8. Hybrid organic/inorganic reverse osmosis (RO) membrane for bactericidal anti-fouling. 1. Preparation and characterization of TiO2 nanoparticle self-assembled aromatic polyamide thin-film-composite (TFC) membrane.

    PubMed

    Kwak, S Y; Kim, S H; Kim, S S

    2001-06-01

    Hybrid organic/inorganic reverse osmosis (RO) membranes composed of aromatic polyamide thin films underneath titanium dioxide (TiO2) nanosized particles have been fabricated by a self-assembly process, aiming at breakthrough of biofouling problems. First, positively charged particles of the colloidal TiO2 were synthesized by a sol-gel process, and the diameter of the resulting particles in acidic aqueous solution was estimated to be approximately 2 nm by analyzing the UV-visible absorption characteristics with a quantum mechanical model developed by Brus. Transmission electron microscopy (TEM) further confirmed the formation of the quantum-sized TiO2 particles (approximately 10 nm or less). The TiO2 particles appeared to exist in the crystallographic form of anatase as observed with the X-ray diffraction (XRD) pattern in comparison with those of commercial 100% rutile and commercial 70:30% anatase-to-rutile mixture. The hybrid thin-film-composite (TFC) aromatic polyamide membranes were prepared by self-assembly of the TiO2 nanoparticles on the polymer chains with COOH groups along the surface. They showed improved RO performance in which the water flux even increased, though slightly. Field-emission scanning electron microscopy (FESEM) exhibited the TiO2 nanoparticles well adsorbed onto the surface. X-ray photoelectron spectroscopy (XPS) demonstrated quantitatively that a considerable amount of the adsorbed particles were tightly self-assembled at the expense of the initial loss of those that were loosely bound, and became stabilized even after exposure to the various washing and harsh RO operating conditions. The antibacterial fouling potential of the TiO2 hybrid membrane was examined and verified by measuring the viable numbers and determining the survival ratios of the Escherichia coli (E. coli) as a model bacterium, both with and without UV light illumination. The photocatalytic bactericidal efficiency was remarkably higher for the TiO2 hybrid membrane under UV

  9. Advances in organic-inorganic hybrid sorbents for the extraction of organic and inorganic pollutants in different types of food and environmental samples.

    PubMed

    Ng, Nyuk-Ting; Kamaruddin, Amirah Farhan; Wan Ibrahim, Wan Aini; Sanagi, Mohd Marsin; Abdul Keyon, Aemi S

    2017-08-21

    The efficiency of the extraction and removal of pollutants from food and the environment has been an important issue in analytical science. By incorporating inorganic species into an organic matrix, a new material known as an organic-inorganic hybrid material is formed. As it possesses high selectivity, permeability, and mechanical and chemical stabilities, organic-inorganic hybrid materials constitute an emerging research field and have become popular to serve as sorbents in various separaton science methods. Here, we review recent significant advances in analytical solid-phase extraction employing organic-inorganic composite/nanocomposite sorbents for the extraction of organic and inorganic pollutants from various types of food and environmental matrices. The physicochemical characteristics, extraction properties, and analytical performances of sorbents are discussed; including morphology and surface characteristics, types of functional groups, interaction mechanism, selectivity and sensitivity, accuracy, and regeneration abilities. Organic-inorganic hybrid sorbents combined with extraction techniques are highly promising for sample preparation of various food and environmental matrixes with analytes at trace levels. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Hybrid organic-inorganic rotaxanes and molecular shuttles.

    PubMed

    Lee, Chin-Fa; Leigh, David A; Pritchard, Robin G; Schultz, David; Teat, Simon J; Timco, Grigore A; Winpenny, Richard E P

    2009-03-19

    The tetravalency of carbon and its ability to form covalent bonds with itself and other elements enables large organic molecules with complex structures, functions and dynamics to be constructed. The varied electronic configurations and bonding patterns of inorganic elements, on the other hand, can impart diverse electronic, magnetic, catalytic and other useful properties to molecular-level structures. Some hybrid organic-inorganic materials that combine features of both chemistries have been developed, most notably metal-organic frameworks, dense and extended organic-inorganic frameworks and coordination polymers. Metal ions have also been incorporated into molecules that contain interlocked subunits, such as rotaxanes and catenanes, and structures in which many inorganic clusters encircle polymer chains have been described. Here we report the synthesis of a series of discrete rotaxane molecules in which inorganic and organic structural units are linked together mechanically at the molecular level. Structural units (dialkyammonium groups) in dumb-bell-shaped organic molecules template the assembly of essentially inorganic 'rings' about 'axles' to form rotaxanes consisting of various numbers of rings and axles. One of the rotaxanes behaves as a 'molecular shuttle': the ring moves between two binding sites on the axle in a large-amplitude motion typical of some synthetic molecular machine systems. The architecture of the rotaxanes ensures that the electronic, magnetic and paramagnetic characteristics of the inorganic rings-properties that could make them suitable as qubits for quantum computers-can influence, and potentially be influenced by, the organic portion of the molecule.

  11. Stable organic-inorganic hybrid multilayered photoelectrochemical cells

    NASA Astrophysics Data System (ADS)

    Park, Sun-Young; Kim, Min-gyeong; Jung, Jaehoon; Heo, Jinhee; Hong, Eun Mi; Choi, Sung Mook; Lee, Joo-Yul; Cho, Shinuk; Hong, Kihyon; Lim, Dong Chan

    2017-02-01

    The production of hydrogen from water via solar energy conversion has attracted immense attention as a potential solution for addressing energy supply issues. We demonstrated a stable and efficient organic-inorganic hybrid photoelectrochemical (H-PEC) cell. Modifying the surface energy and structure of the organic photoactive layer using multi-functional nanomaterials including -OH-modified NiO nanoparticles and reduced graphene oxide (RGO) led to a 2.8-fold enhancement of the water splitting performance in a single junction H-PEC cell. The enhanced performance was attributed to the i) improved water-wettability, ii) enhanced charge extraction property by band-edge alignment, and iii) the catalytic effect of the introduced NiO-OH nanoparticles. In addition, because of the effects of the RGO layer preventing water penetration and photo-corrosion during the oxidation of water, a distinguishable long-term stability was achieved from the H-PEC cell with an RGO capping layer. The best performance was obtained from the organic-inorganic hybrid multi-junction PEC cells consisting of the WO3 photo-anode (activated under UV irradiation) and the H-PEC cell (activated under visible light irradiation). The H-PEC cell with a WO3 photo-anode exhibited significantly enhanced stability and performance by a factor of 11.6 higher than photocurrent of the single H-PEC cell.

  12. Theory of hydrogen migration in organic-inorganic halide perovskites.

    PubMed

    Egger, David A; Kronik, Leeor; Rappe, Andrew M

    2015-10-12

    Solar cells based on organic-inorganic halide perovskites have recently been proven to be remarkably efficient. However, they exhibit hysteresis in their current-voltage curves, and their stability in the presence of water is problematic. Both issues are possibly related to a diffusion of defects in the perovskite material. By using first-principles calculations based on density functional theory, we study the properties of an important defect in hybrid perovskites-interstitial hydrogen. We show that differently charged defects occupy different crystal sites, which may allow for ionization-enhanced defect migration following the Bourgoin-Corbett mechanism. Our analysis highlights the structural flexibility of organic-inorganic perovskites: successive iodide displacements, combined with hydrogen bonding, enable proton diffusion with low migration barriers. These findings indicate that hydrogen defects can be mobile and thus highly relevant for the performance of perovskite solar cells. © 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

  13. Chemically diverse and multifunctional hybrid organic-inorganic perovskites

    NASA Astrophysics Data System (ADS)

    Li, Wei; Wang, Zheming; Deschler, Felix; Gao, Song; Friend, Richard H.; Cheetham, Anthony K.

    2017-02-01

    Hybrid organic-inorganic perovskites (HOIPs) can have a diverse range of compositions including halides, azides, formates, dicyanamides, cyanides and dicyanometallates. These materials have several common features, including their classical ABX3 perovskite architecture and the presence of organic amine cations that occupy the A-sites. Current research in HOIPs tends to focus on metal halide HOIPs, which show promise for use in solar cells and optoelectronic devices; however, the other subclasses also exhibit a diverse range of physical properties. In this Review, we summarize the chemical variability and structural diversity of all known HOIP subclasses. We also present a comprehensive account of their intriguing physical properties, including photovoltaic and optoelectronic properties, dielectricity, magnetism, ferroelectricity, ferroelasticity and multiferroicity. Moreover, we discuss the current challenges and future opportunities in this exciting field.

  14. Organosilica: Chemistry of Mesoporous Organosilica in Nanotechnology: Molecularly Organic-Inorganic Hybridization into Frameworks (Adv. Mater. 17/2016).

    PubMed

    Chen, Yu; Shi, Jianlin

    2016-05-01

    Organic-inorganic hybrid materials can combine the advantages of organic and inorganic materials, and overcome their drawbacks accordingly. On page 3235, Y. Chen and J. L. Shi review and discuss research progress on the design, synthesis, structure, and composition control of organic-inorganic hybrid mesoporous organosilica nanoparticles (MONs). Extensive applications of MONs in nanotechnology, mainly in nanomedicine, nanocatalysis and nanofabrication are discussed. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Photophysical Properties of Novel Organic, Inorganic, and Hybrid Semiconductor Materials

    NASA Astrophysics Data System (ADS)

    Chang, Angela Yenchi

    For the past 200 years, novel materials have driven technological progress, and going forward these advanced materials will continue to deeply impact virtually all major industrial sectors. Therefore, it is vital to perform basic and applied research on novel materials in order to develop new technologies for the future. This dissertation describes the results of photophysical studies on three novel materials with electronic and optoelectronic applications, namely organic small molecules DTDCTB with C60 and C70, colloidal indium antimonide (InSb) nanocrystals, and an organic-inorganic hybrid perovskite with the composition CH3NH3PbI 3-xClx, using transient absorption (TA) and photoluminescence (PL) spectroscopy. In chapter 2, we characterize the timescale and efficiency of charge separation and recombination in thin film blends comprising DTDCTB, a narrow-band gap electron donor, and either C60 or C70 as an electron acceptor. TA and time-resolved PL studies show correlated, sub-picosecond charge separation times and multiple timescales of charge recombination. Our results indicate that some donors fail to charge separate in donor-acceptor mixed films, which suggests material manipulations may improve device efficiency. Chapter 3 describes electron-hole pair dynamics in strongly quantum-confined, colloidal InSb nanocrystal quantum dots. For all samples, TA shows a bleach feature that, for several picoseconds, dramatically red-shifts prior to reaching a time-independent position. We suggest this unusual red-shift relates transient population flow through two energetically comparable conduction band states. From pump-power-dependent measurements, we also determine biexciton lifetimes. In chapter 4, we examine carrier dynamics in polycrystalline methylammonium lead mixed halide perovskite (CH3NH3PbI3-xCl x) thin films as functions of temperature and photoexcitation wavelength. At room temperature, the long-lived TA signals stand in contrast to PL dynamics, where the

  16. A thermodynamic model of mixed organic-inorganic aerosols to predict activity coefficients

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Luo, B. P.; Peter, T.

    2008-08-01

    Tropospheric aerosols contain mixtures of inorganic salts, acids, water, and a large variety of organic compounds. Interactions between these substances in liquid mixtures lead to discrepancies from ideal thermodynamic behaviour. By means of activity coefficients, non-ideal behaviour can be taken into account. We present here a thermodynamic model named AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients) that is able to calculate activity coefficients covering inorganic, organic, and organic-inorganic interactions in aqueous solutions over a wide concentration range. This model is based on the activity coefficient model LIFAC by Yan et al. (1999) that we modified and reparametrised to better describe atmospherically relevant conditions and mixture compositions. Focusing on atmospheric applications we considered H+, Li+, Na+, K+, NH+4, Mg2+, Ca2+, Cl-, Br-, NO-3, HSO-4, and SO2-4 as cations and anions and a wide range of alcohols/polyols composed of the functional groups CHn and OH as organic compounds. With AIOMFAC, the activities of the components within an aqueous electrolyte solution are well represented up to high ionic strength. Most notably, a semi-empirical middle-range parametrisation of direct organic-inorganic interactions in alcohol+water+salt solutions strongly improves the agreement between experimental and modelled activity coefficients. At room temperature, this novel thermodynamic model offers the possibility to compute equilibrium relative humidities, gas/particle partitioning and liquid-liquid phase separations with high accuracy. In further studies, other organic functional groups will be introduced. The model framework is not restricted to specific ions or organic compounds and is therefore also applicable for other research topics.

  17. A thermodynamic model of mixed organic-inorganic aerosols to predict activity coefficients

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Luo, B. P.; Peter, Th.

    2008-03-01

    Tropospheric aerosols contain mixtures of inorganic salts, acids, water, and a large variety of organic compounds. Interactions between these substances in liquid mixtures lead to discrepancies from ideal thermodynamic behaviour. By means of activity coefficients, non-ideal behaviour can be taken into account. We present here a thermodynamic model named AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients) that is able to calculate activity coefficients covering inorganic, organic, and organic-inorganic interactions in aqueous solutions over a wide concentration range. This model is based on the activity coefficient model LIFAC by Yan et al. (1999) that we modified and reparametrised to better describe atmospherically relevant conditions and mixture compositions. Focusing on atmospheric applications we considered H+, Li+, Na+, K+, NH4+, Mg2+, Ca2+, Cl-, Br-, NO3-, HSO4-, and SO42- as cations and anions and a wide range of alcohols/polyols composed of the functional groups CHn and OH as organic compounds. With AIOMFAC, the activities of the components within an aqueous electrolyte solution are well represented up to high ionic strength. Most notably, a semi-empirical middle-range parametrisation of direct organic-inorganic interactions in alcohol + water + salt solutions strongly improves the agreement between experimental and modelled activity coefficients. At room temperature, this novel thermodynamic model offers the possibility to compute equilibrium relative humidities, gas/particle partitioning and liquid-liquid phase separations with high accuracy. In further studies, other organic functional groups will be introduced. The model framework is not restricted to specific ions or organic compounds and is therefore also applicable for other research topics.

  18. Organic/inorganic hybrid coatings for anticorrosion

    NASA Astrophysics Data System (ADS)

    He, Zhouying

    Compared to organic coatings, organic-inorganic hybrid coatings can potentially improve the anticorrosion performance. The organic phase provides the excellent mechaincal and barrier properties while the inorganic phase acts as an adhesion promoter and corrosion inhibitor. Despite that many studies on alkoxylsilane-based hybrid coatings have been developed and studied, their weatherability and anticorrosion performance has been rarely evaluated. On the other hand, organic-inorganic hybrid coatings based on mixed sol-gel precursors have received much less attention compared to alkoxylsilane-based hybrid coatings. In the first part, polyurethane hybrid coatings with a unique hybrid crosslinked structure as an improved unicoat were successfully prepared. The effect of polyesters on physical properties of the hybrid coatings was studied. Polyurethane coatings derived from cycloaliphatic polyester show comparable properties than those derived from the commercially viable aromatic polyester. Introducing the polysiloxane part into the polyurethane coatings enhanced the crosslinking density, Tg, mechanical properties, and general coating properties. The increased adhesion between the hybrid coating and the substrate make the hybrid coating a good candidate for anticorrosion application, which is shown by electrochemical impedance spectroscopy (EIS). The degradation mechanism of the polyurethane/polysiloxane hybrid coatings under various weathering conditions was shown to be the scission of the urethane and ester groups in the organic phase along with reorganizing and rearranging of the inorganic phase. The anticorrosion performance of the cycloaliphatic hybrid was much better than that of aromatic based hybrid under outdoor weathering based on visual observation and EIS analysis. Acid undercutting is an issue for TEOS based hybrid coating. In the second part, design of experiments (DOEs) was used to statistically investigate on the effect of sol-gel precursors. The

  19. Synthesis of organic-inorganic hybrid sols using trifunctional organoalkoxysilanes for dispersion agents.

    PubMed

    Park, Hoyyul; Kang, Dongjun; Ahn, Myeongsang; Lee, Hyeonhwa

    2012-02-01

    We investigated the properties of synthetically produced organic-inorganic hybrid coatings by a sol-gel process. The properties of organic-inorganic hybrid materials arise from the synergism between the properties of the individual components. One of the typical way to synthesize the organic-inorganic hybrid materials is to use silica and silanes. A colloidal silica sol was used as an inorganic material. Methyltrimethoxysilane and phenyltrimethoxysilane were used as the trifunctional organoalkoxysilanes. Hybrid sols of colloidal silica and silanes were synthesized as a function of reaction time and methyltrimethoxysilane/phenyltrimethoxysilane ratio by a sol-gel process. Physical properties of sol solutions such as stability, viscosity, and transmittance were investigated. The surface roughness and surface free energy of the coatings were also measured.

  20. Hybrid Organic-Inorganic Perovskite Photodetectors.

    PubMed

    Tian, Wei; Zhou, Huanping; Li, Liang

    2017-09-12

    Hybrid organic-inorganic perovskite materials garner enormous attention for a wide range of optoelectronic devices. Due to their attractive optical and electrical properties including high optical absorption coefficient, high carrier mobility, and long carrier diffusion length, perovskites have opened up a great opportunity for high performance photodetectors. This review aims to give a comprehensive summary of the significant results on perovskite-based photodetectors, focusing on the relationship among the perovskite structures, device configurations, and photodetecting performances. An introduction of recent progress in various perovskite structure-based photodetectors is provided. The emphasis is placed on the correlation between the perovskite structure and the device performance. Next, recent developments of bandgap-tunable perovskite and hybrid photodetectors built from perovskite heterostructures are highlighted. Then, effective approaches to enhance the stability of perovskite photodetector are presented, followed by the introduction of flexible and self-powered perovskite photodetectors. Finally, a summary of the previous results is given, and the major challenges that need to be addressed in the future are outlined. A comprehensive summary of the research status on perovskite photodetectors is hoped to push forward the development of this field. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Hybrid organic-inorganic polariton laser.

    PubMed

    Paschos, G G; Somaschi, N; Tsintzos, S I; Coles, D; Bricks, J L; Hatzopoulos, Z; Lidzey, D G; Lagoudakis, P G; Savvidis, P G

    2017-09-12

    Organic materials exhibit exceptional room temperature light emitting characteristics and enormous exciton oscillator strength, however, their low charge carrier mobility prevent their use in high-performance applications such as electrically pumped lasers. In this context, ultralow threshold polariton lasers, whose operation relies on Bose-Einstein condensation of polaritons - part-light part-matter quasiparticles, are highly advantageous since the requirement for high carrier injection no longer holds. Polariton lasers have been successfully implemented using inorganic materials owing to their excellent electrical properties, however, in most cases their relatively small exciton binding energies limit their operation temperature. It has been suggested that combining organic and inorganic semiconductors in a hybrid microcavity, exploiting resonant interactions between these materials would permit to dramatically enhance optical nonlinearities and operation temperature. Here, we obtain cavity mediated hybridization of GaAs and J-aggregate excitons in the strong coupling regime under electrical injection of carriers as well as polariton lasing up to 200 K under non-resonant optical pumping. Our demonstration paves the way towards realization of hybrid organic-inorganic microcavities which utilise the organic component for sustaining high temperature polariton condensation and efficient electrical injection through inorganic structure.

  2. Natural hybrid organic-inorganic photovoltaic devices

    NASA Astrophysics Data System (ADS)

    De Padova, Paola; Lucci, Massimiliano; Olivieri, Bruno; Quaresima, Claudio; Priori, Sandro; Francini, Roberto; Grilli, Antonio; Hricovini, Karol; Davoli, Ivan

    2009-06-01

    Natural hybrid organic-inorganic photovoltaic devices based on TiO 2 have been realized. Chlorophyll A (from anacystis nidulans algae), chlorophyll B (from spinach), carmic acid (from insect Coccus cacti L.), synthetic trans- β-carotene, natural fresh picked Morus nigra, and their mixtures have been used as an organic photo active layer to fabricate photovoltaic prototypes. In order to reduce the charge's interfacial recombination, different thicknesses (5-45 nm) of Si layers, subsequently oxidized in air, were inserted between the TiO 2 and chlorophyll B. Scanning electron microscopy of TiO 2 and Si/TiO 2 systems shows the coexistence at least of four classes of nanoparticles of 60, 100, 150 and 250 nm in size. Auger electron spectroscopy of the Si L 2,3V V transition demonstrates the presence of silica and SiO x suboxides. Photocurrent measurements versus radiation wavelength in the range 300-800 nm exhibit different peaks according to the absorption spectra of the organic molecules. All realized photovoltaic devices are suitable for solar light electric energy conversion. Those made of a blend of all organic molecules achieved higher current and voltage output. The Si/TiO 2-based devices containing chlorophyll B exhibited an enhanced photocurrent response with respect to those with TiO 2 only.

  3. Zirconium umbelliferonephosphate - A luminescent organic-inorganic hybrid nanomaterial

    NASA Astrophysics Data System (ADS)

    Roming, Marcus; Feldmann, Claus

    2011-03-01

    Zirconium umbelliferonephosphate (ZrO(UFP)) is prepared by nucleation in the ionic liquid [MeBu 3N][NTf 2]. According to electron microscopy the resulting nanoparticles exhibit mean particle diameters of about 50 nm. The organic-inorganic hybrid material ZrO(UFP) shows blue emission upon UV-excitation. Luminescence originates from the organic dye and is highly intense due to the molar amount of luminescent centers per nanoparticle. The as-prepared material turns out to be non-crystalline. Therefore, its chemical composition is validated by infrared spectroscopy, thermogravimetry, energy-dispersive X-ray analysis and elemental analysis. The results (i.e., thermal decomposition, Zr:P ratio, C-/H-concentration) are in accordance to the composition of ZrO(UFP). Upon addition of acid phosphatase the luminescence intensity of ZrO(UFP) is significantly increased due to enzymatic hydrolysis accompanied by a release of non-bound umbelliferone. Both aspects - the increase in luminescence intensity as well as the release of umbelliferone - might be of future interest regarding biomedical application of ZrO(UFP) nanoparticles.

  4. Special section guest editorial: Hybrid organic-inorganic solar cells

    DOE PAGES

    Nogueira, Ana Flavia; Rumbles, Garry

    2015-04-06

    In this special section of the Journal of Photonics for Energy, there is a focus on some of the science and technology of a range of different hybrid organic-inorganic solar cells. Prior to 1991 there were many significant scientific research reports of hybrid organic-inorganic solar cells; finally, however, it wasn’t until the dye-sensitized solar cell entered the league table of certified research cell efficiencies that this area experienced an explosion of research activity.

  5. Fabrication and characterization of materials and structures for hybrid organic-inorganic photonics

    NASA Astrophysics Data System (ADS)

    Haško, Daniel; Chovan, Jozef; Uherek, František

    2017-03-01

    Hybrid organic-inorganic integrated photonics integrate the organic material, as a part of active layer, with inorganic structure, and it is the organic component that extends the functionalities as compared to inorganic photonics. This paper presents the results of fabrication and characterization of inorganic and organic layers, as well as of hybrid organic-inorganic structures. Inorganic oxide and nitride materials and structures were grown using plasma enhanced chemical vapor deposition. As a substrate for tested organic layers and for preparation of multilayer structures, commercially available SiO2 created by thermal oxidation on Si was used. The hybrid organic-inorganic structures were prepared by spin coating of organic materials on SiO2/Si inorganic structures. As the basic photonics devices, the testing strip inorganic and organic waveguides were fabricated using reactive ion etching. The shape of fabricated testing waveguides was trapezoidal and etched structures were able to guide the radiation. The presented technology enabled to prepare hybrid organic-inorganic structures of comparable dimensions and shape. The fabricated waveguides dimensions and shape will be used for optimisation and design of new lithographic mask to prepare photonic components with required characteristics.

  6. Soft templating strategies for the synthesis of mesoporous materials: inorganic, organic-inorganic hybrid and purely organic solids.

    PubMed

    Pal, Nabanita; Bhaumik, Asim

    2013-03-01

    With the discovery of MCM-41 by Mobil researchers in 1992 the journey of the research on mesoporous materials started and in the 21st century this area of scientific investigation have extended into numerous branches, many of which contribute significantly in emerging areas like catalysis, energy, environment and biomedical research. As a consequence thousands of publications came out in large varieties of national and international journals. In this review, we have tried to summarize the published works on various synthetic pathways and formation mechanisms of different mesoporous materials viz. inorganic, organic-inorganic hybrid and purely organic solids via soft templating pathways. Generation of nanoscale porosity in a solid material usually requires participation of organic template (more specifically surfactants and their supramolecular assemblies) called structure-directing agent (SDA) in the bottom-up chemical reaction process. Different techniques employed for the syntheses of inorganic mesoporous solids, like silicas, metal doped silicas, transition and non-transition metal oxides, mixed oxides, metallophosphates, organic-inorganic hybrids as well as purely organic mesoporous materials like carbons, polymers etc. using surfactants are depicted schematically and elaborately in this paper. Moreover, some of the frontline applications of these mesoporous solids, which are directly related to their functionality, composition and surface properties are discussed at the appropriate places. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. Hybrid Organic/Inorganic Thiol-ene-Based Photopolymerized Networks

    PubMed Central

    Schreck, Kathleen M.; Leung, Diana; Bowman, Christopher N.

    2011-01-01

    The thiol-ene reaction serves as a more oxygen tolerant alternative to traditional (meth)acrylate chemistry for forming photopolymerized networks with numerous desirable attributes including energy absorption, optical clarity, and reduced shrinkage stress. However, when utilizing commercially available monomers, many thiol-ene networks also exhibit decreases in properties such as glass transition temperature (Tg) and crosslink density. In this study, hybrid organic/inorganic thiol-ene resins incorporating silsesquioxane (SSQ) species into the photopolymerized networks were investigated as a route to improve these properties. Thiol- and ene-functionalized SSQs (SH-SSQ and allyl-SSQ, respectively) were synthesized via alkoxysilane hydrolysis/condensation chemistry, using a photopolymerizable monomer [either pentaerythriol tetrakis(3-mercaptopropionate) (PETMP) or 1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TATATO)] as the reaction solvent. The resulting SSQ-containing solutions (SSQ-PETMP and SSQ-TATATO) were characterized, and their incorporation into photopolymerized networks was evaluated. PMID:21984847

  8. Optical Spintronics in Organic-Inorganic Perovskite Photovoltaics.

    PubMed

    Li, Junwen; Haney, Paul M

    2016-04-15

    Organic-inorganic halide CH3NH3PbI3 solar cells have attracted enormous attention in recent years due to their remarkable power conversion efficiency. When inversion symmetry is broken, these materials should exhibit interesting spin-dependent properties as well, owing to their strong spin-orbit coupling. In this work, we consider the spin-dependent optical response of CH3NH3PbI3. We first use density functional theory to compute the ballistic spin current generated by absorption of unpolarized light. We then consider diffusive transport of photogenerated charge and spin for a thin CH3NH3PbI3 layer with a passivated surface and an Ohmic, non-selective contact. The spin density and spin current are evaluated by solving the drift-diffusion equations for a simplified 3-dimensional Rashba model of the electronic structure of the valence and conduction bands. We provide analytic expressions for the photon flux required to induce measurable spin densities, and propose that these spin densities can provide useful information about the role of grain boundaries in the photovoltaic behavior of these materials. We also discuss the prospects for measuring the optically generated spin current with the inverse spin Hall effect.

  9. Optical Spintronics in Organic-Inorganic Perovskite Photovoltaics

    PubMed Central

    Li, Junwen; Haney, Paul M.

    2016-01-01

    Organic-inorganic halide CH3NH3PbI3 solar cells have attracted enormous attention in recent years due to their remarkable power conversion efficiency. When inversion symmetry is broken, these materials should exhibit interesting spin-dependent properties as well, owing to their strong spin-orbit coupling. In this work, we consider the spin-dependent optical response of CH3NH3PbI3. We first use density functional theory to compute the ballistic spin current generated by absorption of unpolarized light. We then consider diffusive transport of photogenerated charge and spin for a thin CH3NH3PbI3 layer with a passivated surface and an Ohmic, non-selective contact. The spin density and spin current are evaluated by solving the drift-diffusion equations for a simplified 3-dimensional Rashba model of the electronic structure of the valence and conduction bands. We provide analytic expressions for the photon flux required to induce measurable spin densities, and propose that these spin densities can provide useful information about the role of grain boundaries in the photovoltaic behavior of these materials. We also discuss the prospects for measuring the optically generated spin current with the inverse spin Hall effect. PMID:27453958

  10. Optical spintronics in organic-inorganic perovskite photovoltaics

    NASA Astrophysics Data System (ADS)

    Li, Junwen; Haney, Paul M.

    2016-04-01

    Organic-inorganic halide CH3NH3PbI3 solar cells have attracted enormous attention in recent years due to their remarkable power conversion efficiency. When inversion symmetry is broken, these materials should exhibit interesting spin-dependent properties as well, owing to their strong spin-orbit coupling. In this work, we consider the spin-dependent optical response of CH3NH3PbI3 . We first use density functional theory to compute the ballistic spin current generated by absorption of unpolarized light. We then consider diffusive transport of photogenerated charge and spin for a thin CH3NH3PbI3 layer with a passivated surface and an Ohmic, nonselective contact. The spin density and spin current are evaluated by solving the drift-diffusion equations for a simplified three-dimensional Rashba model of the electronic structure of the valence and conduction bands. We provide analytic expressions for the photon flux required to induce measurable spin densities, and propose that these spin densities can provide useful information about the role of grain boundaries in the photovoltaic behavior of these materials. We also discuss the prospects for measuring the optically generated spin current with the inverse spin Hall effect.

  11. Chitosan bio-based organic-inorganic hybrid aerogel microspheres.

    PubMed

    El Kadib, Abdelkrim; Bousmina, Mosto

    2012-07-02

    Recently, organic-inorganic hybrid materials have attracted tremendous attention thanks to their outstanding properties, their efficiency, versatility and their promising applications in a broad range of areas at the interface of chemistry and biology. This article deals with a new family of surface-reactive organic-inorganic hybrid materials built from chitosan microspheres. The gelation of chitosan (a renewable amino carbohydrate obtained by deacetylation of chitin) by pH inversion affords highly dispersed fibrillar networks shaped as self-standing microspheres. Nanocasting of sol-gel processable monomeric alkoxides inside these natural hydrocolloids and their subsequent CO(2) supercritical drying provide high-surface-area organic-inorganic hybrid materials. Examples including chitosan-SiO(2), chitosan-TiO(2), chitosan-redox-clusters and chitosan-clay-aerogel microspheres are described and discussed on the basis of their textural and structural properties, thermal and chemical stability and their performance in catalysis and adsorption.

  12. Computation of Phase Equilibria, State Diagrams and Gas/Particle Partitioning of Mixed Organic-Inorganic Aerosols

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Peter, T.

    2009-04-01

    The chemical composition of organic-inorganic aerosols is linked to several processes and specific topics in the field of atmospheric aerosol science. Photochemical oxidation of organics in the gas phase lowers the volatility of semi-volatile compounds and contributes to the particulate matter by gas/particle partitioning. Heterogeneous chemistry and changes in the ambient relative humidity influence the aerosol composition as well. Molecular interactions between condensed phase species show typically non-ideal thermodynamic behavior. Liquid-liquid phase separations into a mainly polar, aqueous and a less polar, organic phase may considerably influence the gas/particle partitioning of semi-volatile organics and inorganics (Erdakos and Pankow, 2004; Chang and Pankow, 2006). Moreover, the phases present in the aerosol particles feed back on the heterogeneous, multi-phase chemistry, influence the scattering and absorption of radiation and affect the CCN ability of the particles. Non-ideal thermodynamic behavior in mixtures is usually described by an expression for the excess Gibbs energy, enabling the calculation of activity coefficients. We use the group-contribution model AIOMFAC (Zuend et al., 2008) to calculate activity coefficients, chemical potentials and the total Gibbs energy of mixed organic-inorganic systems. This thermodynamic model was combined with a robust global optimization module to compute potential liquid-liquid (LLE) and vapor-liquid-liquid equilibria (VLLE) as a function of particle composition at room temperature. And related to that, the gas/particle partitioning of semi-volatile components. Furthermore, we compute the thermodynamic stability (spinodal limits) of single-phase solutions, which provides information on the process type and kinetics of a phase separation. References Chang, E. I. and Pankow, J. F.: Prediction of activity coefficients in liquid aerosol particles containing organic compounds, dissolved inorganic salts, and water - Part

  13. Spectroscopic characterizations of organic/inorganic nanocomposites

    NASA Astrophysics Data System (ADS)

    Govani, Jayesh R.

    2009-12-01

    In the present study, pure and 0.3 wt%, 0.4 wt%, as well as 0.5 wt% L-arginine doped potassium dihydrogen phosphate (KDP) crystals were grown using solution growth techniques and further subjected to infrared (IR) absorption and Raman studies for confirmation of chemical group functionalization for investigating the incorporation mechanism of the L-arginine organic material into the KDP crystal structure. Infrared spectroscopic analysis suggests that structural changes are occurring for the L-arginine molecule as a result of its interaction with the KPD crystal. Infrared spectroscopic technique confirms the disturbance of the N-H, C-H and C-N bonds of the amino acid, suggesting successful incorporation of L-arginine into the KDP crystals. Raman analysis also reveals modification of the N-H, C-H and C-N bonds of the amino acid, implying successful inclusion of L-arginine into the KDP crystals. With the help of Gaussian software, a prediction of possible incorporation mechanisms of the organic material was obtained from comparison of the simulated infrared and Raman vibrational spectra with the experimental results. Furthermore, we also studied the effect of L-arginine doping on the thermal stability of the grown KDP crystal by employing Thermo gravimetric analysis (TGA). TGA suggests that increasing the level of L-arginine doping speeds the decomposition process and it weakens the KDP crystal, which indicates successful doping of the KDP crystals with L-arginine amino acid. Urinary stones are one of the oldest and most widely spread diseases in humans, animals and birds. Many remedies have been employed through the ages for the treatment of urinary stones. Recent medicinal measures reflect the modern advances, which are based on surgical removal, percutaneous techniques and extracorporeal shock wave lithotripsy (ESWL). Although these procedures are valuable, they are quite expensive for most people. Furthermore, recurrence of these diseases is awfully frequent with

  14. Progress on lanthanide-based organic-inorganic hybrid phosphors.

    PubMed

    Carlos, Luís D; Ferreira, Rute A S; de Zea Bermudez, Verónica; Julián-López, Beatriz; Escribano, Purificación

    2011-02-01

    Research on organic-inorganic hybrid materials containing trivalent lanthanide ions (Ln(3+)) is a very active field that has rapidly shifted in the last couple of years to the development of eco-friendly, versatile and multifunctional systems, stimulated by the challenging requirements of technological applications spanning domains as diverse as optics, environment, energy, and biomedicine. This tutorial review offers a general overview of the myriad of advanced Ln(3+)-based organic-inorganic hybrid materials recently synthesised, which may be viewed as a major innovation in areas of phosphors, lighting, integrated optics and optical telecommunications, solar cells, and biomedicine.

  15. Atomic force microscopy of electrospun organic-inorganic lipid nanofibers

    NASA Astrophysics Data System (ADS)

    Zhang, Jinhong; Cohn, Celine; Qiu, Weiguo; Zha, Zhengbao; Dai, Zhifei; Wu, Xiaoyi

    2011-09-01

    An organic-inorganic hybridization strategy has been proposed to synthesize polymerizable lipid-based materials for the creation of highly stable lipid-mimetic nanostructures. We employ atomic force microscopy (AFM) to analyze the surface morphology and mechanical property of electrospun cholesteryl-succinyl silane (CSS) nanofibers. The AFM nanoindentation of the CSS nanofibers reveals elastic moduli of 55.3 ± 27.6 to 70.8 ± 35 MPa, which is significantly higher than the moduli of natural phospholipids and cholesterols. The study shows that organic-inorganic hybridization is useful in the design of highly stable lipid-based materials.

  16. Special section guest editorial: Hybrid organic-inorganic solar cells

    SciTech Connect

    Nogueira, Ana Flavia; Rumbles, Garry

    2015-04-06

    In this special section of the Journal of Photonics for Energy, there is a focus on some of the science and technology of a range of different hybrid organic-inorganic solar cells. Prior to 1991 there were many significant scientific research reports of hybrid organic-inorganic solar cells; finally, however, it wasn’t until the dye-sensitized solar cell entered the league table of certified research cell efficiencies that this area experienced an explosion of research activity.

  17. An alternative method to remove PEO-PPO-PEO template in organic-inorganic mesoporous nanocomposites by sulfuric acid extraction

    NASA Astrophysics Data System (ADS)

    Zhuang, Xin; Qian, Xufang; Lv, Jiahui; Wan, Ying

    2010-06-01

    Sulfuric acid is used as an extraction agent to remove PEO-PPO-PEO templates in the organic-inorganic mesoporous nanocomposites from the triconstituent co-assembly which includes the low-polymerized phenolic resins, TEOS and triblock copolymer F127. The XRD and TEM results show well ordered mesostructure after extraction with sulfuric acid. As followed from the N 2 sorption isotherms the extracted composites possess high surface areas (332-367 m 2/g), large pore volumes (0.66-0.78 cm 3/g), and large pore sizes (about 10.7 nm). The FT-IR analysis reveals almost complete elimination of triblock copolymer F127, and the maintenance of organic groups. This method shows potentials in removing templates from nanocomposites containing functional moieties.

  18. Organic-inorganic hybrid nanoparticles: surface characteristics and interactions with a polyester resin.

    PubMed

    Jesson, David A; Abel, Marie-Laure; Hay, John N; Smith, Paul A; Watts, John F

    2006-05-23

    Organic-inorganic hybrid nanoparticles, derived from silica precursors with different organic functionalities (methyl, ethyl, vinyl, and phenyl) synthesized via a modified Stöber method have been investigated. These particles are intended as modifiers for polymers and polymer matrix composites. Therefore, the characteristics of a polyester matrix have also been determined, and the likely interactions with the particles have been proposed. Particles have been characterized using inverse gas chromatography (IGC), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (FT-IR). The particles show two different sets of characteristics, with methyl, ethyl, and vinyl modified silicas showing one type of behavior and the phenyl modified silica behaving rather differently. The methyl, ethyl, and vinyl groups exhibit the appearance of uniform coverage, as they are comparatively small and tightly packed, which will prevent interaction of matrix resin with retained silanol groups. The phenyl group, which is comparatively large, is not able to pack as closely, which results in a reduction of the presence and availability of silanol groups, compared to an unmodified fumed silica, but not complete inaccessibility as far as the matrix resin is concerned.

  19. Superhalogens as building blocks of two-dimensional organic-inorganic hybrid perovskites for optoelectronics applications.

    PubMed

    Yao, Qiushi; Fang, Hong; Deng, Kaiming; Kan, Erjun; Jena, Puru

    2016-10-20

    Organic-inorganic hybrid perovskites, well known for their potential as the next generation solar cells, have found another niche application in optoelectronics. This was demonstrated in a recent experiment (L. Dou, et al., Science, 2015, 349, 1518) on atomically thin (C4H9NH3)2PbBr4, where, due to quantum confinement, the bandgap and the exciton binding energy are enhanced over their corresponding values in the three-dimensional bulk phase. Using density functional theory we show that when halogen atoms (e.g. I) are sequentially replaced with superhalogen molecules (e.g. BH4) the bandgap and exciton binding energy increase monotonically with the superhalogen content with the exciton binding energy of (C4H9NH3)2Pb(BH4)4 approaching the value in monolayer black phosphorus. Lead-free admixtures (C4H9NH3)2MI4-x(BH4)x (M = Sn and Ge; x = 0-4) also show a similar trend. Thus, a combination of quantum confinement and compositional change can be used as an effective strategy to tailor the bandgap and the exciton binding energy of two-dimensional hybrid perovskites, making them promising candidates for optoelectronic applications.

  20. Organic/inorganic hybrid amine and sulfonic acid tethered silica materials: Synthesis, characterization and application

    NASA Astrophysics Data System (ADS)

    Hicks, Jason Christopher

    hybrid sulfonic acid functionalized silica material capable of activating metallocenes for the polymerization of ethylene when small amounts of an alkylaluminum was added. Lastly, an organic/inorganic hybrid hyperbranched aminosilica material capable of capturing carbon dioxide from flue gas streams was synthesized. This material was determined to capture CO2 with capacities higher than currently reported aminosilica adsorbents.

  1. Influence of particle phase state on the hygroscopic behavior of mixed organic-inorganic aerosols

    NASA Astrophysics Data System (ADS)

    Hodas, N.; Zuend, A.; Mui, W.; Flagan, R. C.; Seinfeld, J. H.

    2014-12-01

    Recent work has demonstrated that organic and mixed organic-inorganic particles can exhibit multiple phase states depending on their chemical composition and on ambient conditions such as relative humidity (RH). To explore the extent to which water uptake varies with particle phase behavior, hygroscopic growth factors (HGFs) of nine laboratory-generated, organic and organic-inorganic aerosol systems with physical states ranging from well-mixed liquids, to phase-separated particles, to viscous liquids or semi-solids were measured with the Differential Aerosol Sizing and Hygroscopicity Spectrometer Probe at RH values ranging from 40-90%. Water-uptake measurements were accompanied by HGF and RH-dependent thermodynamic equilibrium calculations using the Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients (AIOMFAC) model. In addition, AIOMFAC-predicted growth curves are compared to several simplified HGF modeling approaches: (1) representing particles as ideal, well-mixed liquids, (2) forcing a single phase, but accounting for non-ideal interactions through activity coefficient calculations, and (3) a Zdanovskii-Stokes-Robinson-like calculation in which complete separation between the inorganic and organic components is assumed at all RH values, with water-uptake treated separately in each of the individual phases. We observed variability in the characteristics of measured hygroscopic growth curves across aerosol systems with differing phase behaviors, with growth curves approaching smoother, more continuous water uptake with decreasing prevalence of liquid-liquid phase separation and increasing oxygen : carbon ratios of the organic aerosol components. We also observed indirect evidence for the dehydration-induced formation of highly viscous semi-solid phases and for kinetic limitations to the crystallization of ammonium sulfate at low RH for sucrose-containing particles. AIOMFAC-predicted growth curves are generally in good agreement with the HGF

  2. Influence of particle-phase state on the hygroscopic behavior of mixed organic-inorganic aerosols

    NASA Astrophysics Data System (ADS)

    Hodas, N.; Zuend, A.; Mui, W.; Flagan, R. C.; Seinfeld, J. H.

    2015-05-01

    Recent work has demonstrated that organic and mixed organic-inorganic particles can exhibit multiple phase states depending on their chemical composition and on ambient conditions such as relative humidity (RH). To explore the extent to which water uptake varies with particle-phase behavior, hygroscopic growth factors (HGFs) of nine laboratory-generated, organic and organic-inorganic aerosol systems with physical states ranging from well-mixed liquids to phase-separated particles to viscous liquids or semi-solids were measured with the Differential Aerosol Sizing and Hygroscopicity Spectrometer Probe at RH values ranging from 40 to 90%. Water-uptake measurements were accompanied by HGF and RH-dependent thermodynamic equilibrium calculations using the Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients (AIOMFAC) model. In addition, AIOMFAC-predicted growth curves are compared to several simplified HGF modeling approaches: (1) representing particles as ideal, well-mixed liquids; (2) forcing a single phase but accounting for non-ideal interactions through activity coefficient calculations; and (3) a Zdanovskii-Stokes-Robinson-like calculation in which complete separation of the inorganic and organic components is assumed at all RH values, with water uptake treated separately in each of the individual phases. We observed variability in the characteristics of measured hygroscopic growth curves across aerosol systems with differing phase behaviors, with growth curves approaching smoother, more continuous water uptake with decreasing prevalence of liquid-liquid phase separation and increasing oxygen : carbon ratios of the organic aerosol components. We also observed indirect evidence for the dehydration-induced formation of highly viscous semi-solid phases and for kinetic limitations to the crystallization of ammonium sulfate at low RH for sucrose-containing particles. AIOMFAC-predicted growth curves are generally in good agreement with the HGF

  3. Synthesis and characterization of silicon-based polymers for use as organic/inorganic hybrids and silicon carbide precursors

    NASA Astrophysics Data System (ADS)

    Sellinger, Alan

    Organic/inorganic hybrids from silsesquioxanes. This Dissertation describes the synthesis and characterization of methacrylate, epoxy and liquid crystalline (LC)-containing organic/inorganic hybrid materials based on silsesquioxanes. While the methacrylate and epoxy groups provide polymerizable moieties to the hybrids, the LC component is anticipated to provide toughness, and oxidative stability as well as minimize shrinkage during curing. The inorganic silsesquioxane portion, ((RSiOsb{1.5})sb8, cubes), which closely resembles specific crystalline forms of silica and zeolites, may be covalently linked to a variety of organic functional groups. As a result, single-phase organic/inorganic hybrids are formed that when polymerized mimic silica-reinforced composites. The resultant hybrids are liquids at room temperature, and hence allow for single-phase composite processing, ideal for abrasion-resistant coatings and filling molds, as in dental restorative applications. The reactions are based on inexpensive starting materials, have high yields (>80%), and form soluble products containing up to 65% masked silica. The hybrids were characterized using NMR spectroscopy (sp1H,\\ sp{13}C,\\ sp{29}Si), FTIR, size exclusion chromatography (SEC), and thermal analysis (TGA, DSC). A modified polymethylsilane as a precursor of silicon carbide. It is generally known that polymer precursor routes to silicon carbide (SiC) are very important in the processing of SiC fibers and high performance SiC parts with specific shapes. It is further known that commercial SiC precursor polymers are often not resistant to oxidation, and are based on monomers rich in carbon. As a result of this, their pyrolysis yields SiC rich in oxygen and carbon, a feature which drastically reduces the final materials' ultimate properties (high temperature resistance, tensile strength, modulus). To remedy this, we describe in this work the synthesis and characterization of a modified polymethylsilane (mPMS) which

  4. Hybrid organic-inorganic materials based on hydroxyapatite structure

    NASA Astrophysics Data System (ADS)

    Moussa, Sana Ben; Bachouâ, Hassen; Gruselle, Michel; Beaunier, Patricia; Flambard, Alexandrine; Badraoui, Béchir

    2017-04-01

    The present article details the formation of calcium hydroxyapatite synthesized by the hydrothermal way, in presence of glycine or sarcosine. The presence of these amino-acids during the synthetic processes reduces the crystalline growthing through the formation of hybrid organic-inorganic species The crystallite sizes are decreasing and the morphology is modified with the increase of the amino-acid concentration.

  5. Energetics and dynamics in organic-inorganic halide perovskite photovoltaics and light emitters

    NASA Astrophysics Data System (ADS)

    Chien Sum, Tze; Chen, Shi; Xing, Guichuan; Liu, Xinfeng; Wu, Bo

    2015-08-01

    The rapid transcendence of organic-inorganic metal halide perovskite solar cells to above the 20% efficiency mark has captivated the broad photovoltaic community. As the efficiency race continues unabated, it is essential that fundamental studies keep pace with these developments. Further gains in device efficiencies are expected to be increasingly arduous and harder to come by. The key to driving the perovskite solar cell efficiencies towards their Shockley-Queisser limit is through a clear understanding of the interfacial energetics and dynamics between perovskites and other functional materials in nanostructured- and heterojunction-type devices. In this review, we focus on the current progress in basic characterization studies to elucidate the interfacial energetics (energy-level alignment and band bending) and dynamical processes (from the ultrafast to the ultraslow) in organic-inorganic metal halide perovskite photovoltaics and light emitters. Major findings from these studies will be distilled. Open questions and scientific challenges will also be highlighted.

  6. Organic-inorganic macroion coacervate complexation.

    PubMed

    Jing, Benxin; Qiu, Jie; Zhu, Yingxi

    2017-07-19

    Coacervate complexes that are liquid-liquid separated complex materials are often formed by stoichiometrically mixing oppositely charged polyelectrolytes in salted aqueous solution. Entropy-driven ion pairing, resulting from the release of counterions near polyelectrolytes, has been identified as the primary driving force for coacervate formation between oppositely charged polyelectrolytes, including proteins and DNA, in aqueous solution. In this work we have examined the complexation between net neutral zwitterionic poly(sulfobetaine methacrylate) (PSBMA) and inorganic polyoxometalate (POM) polyanions in LiCl aqueous solutions. Biphasic liquid-like coacervate complexes can be formed over a much broader range of POM-to-PSBMA molar ratio and LiCl concentration than that for conventional polyelectrolyte coacervate complexation. Composition analysis of the dried supernatant and dense coacervate has confirmed that both PSBMA and POM macroions are primarily present in the dense coacervate as the macroion-rich phase in contrast to the presence of LiCl solely in the supernatant as the macroion-poor phase. The increase of net charge negativity of PSBMA and supernatant conductivity suggests stronger binding of PSBMA with POM anions than monovalent Cl(-), resulting in the release of bound Cl(-) anions to the aqueous solution for the formation of PSBMA-POM coacervates in LiCl solution. All experimental evidence has demonstrated the generality of ion-pairing induced coacervate complexation with net neutral zwitterionic polymers and multivalent inorganic nanomaterials. The complexation between organic and inorganic macroions could give insights into many supramolecular assembly processes in nature and also lead to a new paradigm in developing hybrid macroionic materials for emerging applications from green catalysis to nanomedicine.

  7. Surface chemistry for molecular layer deposition of organic and hybrid organic-inorganic polymers.

    PubMed

    George, Steven M; Yoon, Byunghoon; Dameron, Arrelaine A

    2009-04-21

    The fabrication of many devices in modern technology requires techniques for growing thin films. As devices miniaturize, manufacturers will need to control thin film growth at the atomic level. Because many devices have challenging morphologies, thin films must be able to coat conformally on structures with high aspect ratios. Techniques based on atomic layer deposition (ALD), a special type of chemical vapor deposition, allow for the growth of ultra-thin and conformal films of inorganic materials using sequential, self-limiting reactions. Molecular layer deposition (MLD) methods extend this strategy to include organic and hybrid organic-inorganic polymeric materials. In this Account, we provide an overview of the surface chemistry for the MLD of organic and hybrid organic-inorganic polymers and examine a variety of surface chemistry strategies for growing polymer thin films. Previously, surface chemistry for the MLD of organic polymers such as polyamides and polyimides has used two-step AB reaction cycles using homo-bifunctional reactants. However, these reagents can react twice and eliminate active sites on the growing polymer surface. To avoid this problem, we can employ alternative precursors for MLD based on hetero-bifunctional reactants and ring-opening reactions. We can also use surface activation or protected chemical functional groups. In addition, we can combine the reactants for ALD and MLD to grow hybrid organic-inorganic polymers that should display interesting properties. For example, using trimethylaluminum (TMA) and various diols as reactants, we can achieve the MLD of alucone organic-inorganic polymers. We can alter the chemical and physical properties of these organic-inorganic polymers by varying the organic constituent in the diol or blending the alucone MLD films with purely inorganic ALD films to build a nanocomposite or nanolaminate. The combination of ALD and MLD reactants enlarges the number of possible sequential self-limiting surface

  8. Hydrogen Bonding and Stability of Hybrid Organic-Inorganic Perovskites.

    PubMed

    El-Mellouhi, Fedwa; Marzouk, Asma; Bentria, El Tayeb; Rashkeev, Sergey N; Kais, Sabre; Alharbi, Fahhad H

    2016-09-22

    In the past few years, the efficiency of solar cells based on hybrid organic-inorganic perovskites has exceeded the level needed for commercialization. However, existing perovskites solar cells (PSCs) suffer from several intrinsic instabilities, which prevent them from reaching industrial maturity, and stabilizing PSCs has become a critically important problem. Here we propose to stabilize PSCs chemically by strengthening the interactions between the organic cation and inorganic anion of the perovskite framework. In particular, we show that replacing the methylammonium cation with alternative protonated cations allows an increase in the stability of the perovskite by forming strong hydrogen bonds with the halide anions. This interaction also provides opportunities for tuning the electronic states near the bandgap. These mechanisms should have a universal character in different hybrid organic-inorganic framework materials that are widely used. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Charge carrier mobility in an organic-inorganic hybrid nanocomposite

    NASA Astrophysics Data System (ADS)

    Choudhury, Kaushik Roy; Winiarz, Jeffrey G.; Samoc, Marek; Prasad, Paras N.

    2003-01-01

    Organic-inorganic hybrid materials are media for electronic and optoelectronic applications. We present a study of the electronic transport in such a model nanoparticle-sensitized hybrid organic-inorganic photorefractive host system, consisting of poly(N-vinylcarbazole) doped with quantum dots of cadmium sulfide, using standard time-of-flight techniques. The photocurrent transients exhibit features typical of dispersive transport in an amorphous semiconductor. The hole mobility depends strongly on the electric field and temperature indicating Poole-Frenkel-like activated hopping transport; a thickness dependence of the mobility is observed. The presence of nanoparticles does not lead to increased trapping of holes. Conversely, a surprising result is observed: the mobility actually increases with the increase of nanoparticle concentration even though it is well below the percolation limit.

  10. Thin Film Solar Cells: Organic, Inorganic and Hybrid

    NASA Technical Reports Server (NTRS)

    Dankovich, John

    2004-01-01

    Thin film solar cells are an important developing resource for hundreds of applications including space travel. In addition to being more cost effective than traditional single crystal silicon cells, thin film multi-crystaline cells are plastic and light weight. The plasticity of the cells allows for whole solar panels to be rolled out from reams. Organic layers are being investigated in order to increase the efficiency of the cells to create an organic / inorganic hybrid cell. The main focus of the group is a thin film inorganic cell made with the absorber CuInS2. So far the group has been successful in creating the layer from a single-source precursor. They also use a unique method of film deposition called chemical vapor deposition for this. The general makeup of the cell is a molybdenum back contact with the CuInS2 layer, then CdS, ZnO and aluminum top contacts. While working cells have been produced, the efficiency so far has been low. Along with quantum dot fabrication the side project of this that is currently being studied is adding a polymer layer to increase efficiency. The polymer that we are using is P3OT (Poly(3-octylthiopene-2,5-diyll), retroregular). Before (and if) it is added to the cell, it must be understood in itself. To do this simple diodes are being constructed to begin to look at its behavior. The P3OT is spin coated onto indium tin oxide and silver or aluminum contacts are added. This method is being studied in order to find the optimal thickness of the layer as well as other important considerations that may later affect the composition of the finished solar cell. Because the sun is the most abundant renewable, energy source that we have, it is important to learn how to harness that energy and begin to move away from our other depleted non-renewable energy sources. While traditional silicon cells currently create electricity at relatively high efficiencies, they have drawbacks such as weight and rigidness that make them unattractive

  11. Thin Film Solar Cells: Organic, Inorganic and Hybrid

    NASA Technical Reports Server (NTRS)

    Dankovich, John

    2004-01-01

    Thin film solar cells are an important developing resource for hundreds of applications including space travel. In addition to being more cost effective than traditional single crystal silicon cells, thin film multi-crystaline cells are plastic and light weight. The plasticity of the cells allows for whole solar panels to be rolled out from reams. Organic layers are being investigated in order to increase the efficiency of the cells to create an organic / inorganic hybrid cell. The main focus of the group is a thin film inorganic cell made with the absorber CuInS2. So far the group has been successful in creating the layer from a single-source precursor. They also use a unique method of film deposition called chemical vapor deposition for this. The general makeup of the cell is a molybdenum back contact with the CuInS2 layer, then CdS, ZnO and aluminum top contacts. While working cells have been produced, the efficiency so far has been low. Along with quantum dot fabrication the side project of this that is currently being studied is adding a polymer layer to increase efficiency. The polymer that we are using is P3OT (Poly(3-octylthiopene-2,5-diyll), retroregular). Before (and if) it is added to the cell, it must be understood in itself. To do this simple diodes are being constructed to begin to look at its behavior. The P3OT is spin coated onto indium tin oxide and silver or aluminum contacts are added. This method is being studied in order to find the optimal thickness of the layer as well as other important considerations that may later affect the composition of the finished solar cell. Because the sun is the most abundant renewable, energy source that we have, it is important to learn how to harness that energy and begin to move away from our other depleted non-renewable energy sources. While traditional silicon cells currently create electricity at relatively high efficiencies, they have drawbacks such as weight and rigidness that make them unattractive

  12. Preparation of chitosan/nano hydroxyapatite organic-inorganic hybrid microspheres for bone repair.

    PubMed

    Chen, Jingdi; Pan, Panpan; Zhang, Yujue; Zhong, Shengnan; Zhang, Qiqing

    2015-10-01

    In this work, we encapsulated icariin (ICA) into chitosan (CS)/nano hydroxyapatite (nHAP) composite microspheres to form organic-inorganic hybrid microspheres for drug delivery carrier. The composition and morphology of composite microspheres were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and differential scanning calorimetry- thermogravimetric analysis (DSC-TGA). Moreover, we further studied the performance of swelling properties, degradation properties and drug release behavior of the microspheres. ICA, the extract of traditional Chinese medicine-epimedium, was combined to study drug release properties of the microspheres. ICA loaded microspheres take on a sustained release behavior, which can be not only ascribed to electrostatic interaction between reactive negative hydroxyl (OH) of ICA and positive amine groups (NH₂) of CS, but also depended on the homogeneous dispersion of HAP nanoparticles inside CS organic matrix. In addition, the adhesion and morphology of osteoblasts were detected by inverted fluorescence microscopy. The biocompatibility of CS/nHAP/ICA microspheres was evaluated by the MTT cytotoxicity assay, Hoechst 33258 and PI fluorescence staining. These studies demonstrate that composite microspheres provide a suitable microenvironment for osteoblast attachment and proliferation. It can be speculated that the ICA loaded CS-based organic-inorganic hybrid microspheres might have potential applications in drug delivery systems.

  13. Near-infrared sensitive organic-inorganic photorefractive device

    NASA Astrophysics Data System (ADS)

    Marinova, Vera; Liu, Ren-Chung; Lin, Shiuan-Huei; Chen, Ming-Syuan; Lin, Yi-Hsin; Hsu, Ken-Yuh

    2016-10-01

    Organic-inorganic hybrid structure, assembled by Rh-doped Bi12TiO20 crystal and liquid crystal (LC) layer, operating at near-infrared range is proposed and demonstrated. Due to the photorefractive properties of inorganic substrate, light illumination caused a space charge field which acts as a driving force for LC molecules re-alignment and subsequent refractive index modulation. All optically controlled phase retardation ability has been demonstrated supporting possibilities for further infrared applications.

  14. REE and Y in groundwater in the upper 1.2 km of Proterozoic granitoids (Eastern Sweden) - Assessing the role of composition and origin of groundwaters, geochemistry of fractures, and organic/inorganic aqueous complexation

    NASA Astrophysics Data System (ADS)

    Mathurin, Frédéric A.; Åström, Mats E.; Drake, Henrik; Maskenskaya, Olga M.; Kalinowski, Birgitta E.

    2014-11-01

    Yttrium and rare earth elements (YREEs) are studied in groundwater in the shallow regolith aquifer and the fracture networks of the upper 1.2 km of Paleoproterozoic granitoids in boreal Europe (Laxemar and Forsmark areas, Sweden). The study includes groundwater sampled via a total of 34 shallow boreholes reaching the bottom of the regolith aquifer, and 72 deep boreholes with equipment designed for retrieval of representative groundwater at controlled depths in the fractured bedrock. The groundwater composition differs substantially between regolith and fracture groundwater and between areas, which affects the dissolved YREE features, including concentrations and NASC normalized patterns. In the fresh groundwater in the regolith aquifers, highest YREE concentrations occur (10th and 90th percentile; Laxemar: 4.4-82 μg L-1; Forsmark: 1.9-19 μg L-1), especially in the slightly acidic groundwater (pH: 6.3-7.2 - Laxemar), where the normalized YREE patterns are slightly enriched in light REEs (LaNASC/YNASC: 1.1-2.4). In the recharge areas, where redox potentials of the regolith groundwater is more moderate, negative Ce anomaly (Laxemar: 0.37-0.45; Forsmark: 0.15-0.92) and positive Y anomaly (mainly in Forsmark: 1.0-1.7) are systematically more pronounced than in discharge areas. The significant correlations between the YREE features and dissolved organic carbon, minor elements, and somewhat pH suggest a strong control of humic substances (HSs) together with Al rich colloids and redox sensitive Fe-Mn hydrous precipitates on the dissolved YREE pools. In the bedrock fractures, the groundwater is circumneutral to slightly basic and displays YREE concentrations that are at least one order of magnitude lower than the regolith groundwater, and commonly below detection limit in the deep brackish and saline groundwater, with some exceptions such as La and Y. At intermediate depth (>50 m), where groundwater of meteoric origin percolates, the LaNASC/YNASC values moderately to

  15. High Temperature Resistant Organic/Inorganic Hybrid Polymers: An Architectural Study

    DTIC Science & Technology

    2007-04-18

    DATES COVERED July 10 2003 – January 09 2007 4. TITLE AND SUBTITLE High Temperature Resistant Organic/ Inorganic Hybrid Polymers: An...Supramolecular Chemistry, High Temperature Materials, Organic Inorganic Hybrid Materials, Sensors 15. NUMBER OF PAGES 16...298-102 Enclosure 1 2 High Temperature Resistant Organic/ Inorganic Hybrid Polymers: An Architectural Study DAAD19-03-1-0208 PIs Stuart

  16. Morphologies of mixed organic/inorganic/aqueous aerosol droplets.

    PubMed

    Song, Mijung; Marcolli, Claudia; Krieger, Ulrich K; Lienhard, Daniel M; Peter, Thomas

    2013-01-01

    Despite major progress in the understanding of properties of tropospheric aerosol particles, it remains challenging to understand their physical state and morphology. To obtain more detailed knowledge of the phases, phase transitions and morphologies of internally mixed organic/inorganic aerosol particles, we evaluated liquid-liquid phase separation (LLPS), deliquescence relative humidity (DRH) and efflorescence relative humidity (ERH) of 33 organic/ammonium sulfate (AS)/H2O systems from our own and literature data. The organic fraction consists of single compounds or mixtures with up to ten aliphatic and/or aromatic components with carboxylic acid, hydroxyl, carbonyl, ether, and ester functionalities, covering O : C ratios between 0.29 and 1.33. Thirteen out of these 33 systems did not show LLPS for any of the studied organic-to-inorganic mixing ratios, sixteen underwent LLPS showing core-shell morphology, and four showed both core-shell and partially engulfed configurations depending on the organic-to-inorganic ratio and RH. In all cases the organic fractions of the systems with partially engulfed configurations consisted of dicarboxylic acids. AS in mixed organic/AS/H2O particles deliquesced between 70 and 84% RH. AS effloresced below 58% RH or remained in a one-liquid-phase state. AS in droplets with LLPS always showed efflorescence with ERH between 30 and 50% RH, providing clear evidence that the presence of LLPS facilitates AS efflorescence. Spreading coefficients of the organic-rich phase on the AS-rich phase for systems containing polyethylene glycol 400 (PEG-400) and a mixture of dicarboxylic acids are in agreement with the optically observed morphologies of droplets deposited on the hydrophobic substrate. Analysis of high resolution elastic Mie resonance spectra allowed the detection of LLPS for single levitated droplets consisting of PEG-400/AS/ H2O, whereas LLPS was difficult to detect in (2-methylglutaric acid + 3-methylglutaric acid + 2

  17. Gravimetric chemical sensors based on silica-based mesoporous organic-inorganic hybrids.

    PubMed

    Xu, Jiaqiang; Zheng, Qi; Zhu, Yongheng; Lou, Huihui; Xiang, Qun; Cheng, Zhixuan

    2014-09-01

    Silica-based mesoporous organic-inorganic hybrid material modified quartz crystal microbalance (QCM) sensors have been examined for their ability to achieve highly sensitive and selective detection. Mesoporous silica SBA-15 serves as an inorganic host with large specific surface area, facilitating gas adsorption, and thus leads to highly sensitive response; while the presence of organic functional groups contributes to the greatly improved specific sensing property. In this work, we summarize our efforts in the rational design and synthesis of novel sensing materials for the detection of hazardous substances, including simulant nerve agent, organic vapor, and heavy metal ion, and develop high-performance QCM-based chemical sensors.

  18. Hydrolysis of oligosaccharides from distillers grains using organic-inorganic hybrid mesoporous silica catalysts.

    PubMed

    Bootsma, Jason A; Entorf, Matthew; Eder, Judd; Shanks, Brent H

    2008-08-01

    The use of propylsulfonic acid-functionalized mesoporous silica as a catalyst for the hydrolysis of oligosaccharides released by hydrothermal pretreatment of distiller's grains was examined in batch reactor studies. The effectiveness of the catalyst system for oligosaccharide hydrolysis was found to improve significantly with increased reaction temperature. This higher temperature operation allowed for more selective recovery of glucose, but was detrimental to arabinose recovery since significant degradation occurred. Xylose recovery efficiency improved with increasing temperature, but the higher temperature led to increased degradation. Using a model feed, solubilized proteins were found to deactivate the organic-inorganic hybrid catalyst, but a simple pretreatment with activated silica was found to alleviate the deactivation.

  19. The electronic structure of organic-inorganic hybrid compounds: (NH₄)₂CuCl₄, (CH₃NH₃)₂CuCl₄ and (C₂H₅NH₃)₂CuCl₄.

    PubMed

    Zolfaghari, P; de Wijs, G A; de Groot, R A

    2013-07-24

    Hybrid organic-inorganic compounds are an intriguing class of materials that have been experimentally studied over the past few years because of a potential broad range of applications. The electronic and magnetic properties of three organic-inorganic hybrid compounds with compositions (NH4)2CuCl4, (CH3NH3)2CuCl4 and (C2H5NH3)2CuCl4 are investigated for the first time with density functional theory plus on-site Coulomb interaction. A strong Coulomb interaction on the copper causes a relatively weak exchange coupling within the layers of the octahedral network, in good agreement with experiment. The character of the exchange interaction (responsible for magnetic behavior) is analyzed. The calculations reveal that (C2H5NH3)2CuCl4 has the strongest Jahn-Teller (JT) distortion in comparison with the two other compounds. The easy axis of magnetization is investigated, showing a weak anisotropic interaction between inter-layer Cu(2+) ions in the (C2H5NH3)2CuCl4 structure. Orbital ordering is concluded from our partial density of states calculations: a cooperation of the JT distortion with an antiferro-distortive pattern.

  20. Automated process for solvent separation of organic/inorganic substance

    DOEpatents

    Schweighardt, Frank K.

    1986-01-01

    There is described an automated process for the solvent separation of organic/inorganic substances that operates continuously and unattended and eliminates potential errors resulting from subjectivity and the aging of the sample during analysis. In the process, metered amounts of one or more solvents are passed sequentially through a filter containing the sample under the direction of a microprocessor control apparatus. The mixture in the filter is agitated by ultrasonic cavitation for a timed period and the filtrate is collected. The filtrate of each solvent extraction is collected individually and the residue on the filter element is collected to complete the extraction process.

  1. Automated process for solvent separation of organic/inorganic substance

    DOEpatents

    Schweighardt, F.K.

    1986-07-29

    There is described an automated process for the solvent separation of organic/inorganic substances that operates continuously and unattended and eliminates potential errors resulting from subjectivity and the aging of the sample during analysis. In the process, metered amounts of one or more solvents are passed sequentially through a filter containing the sample under the direction of a microprocessor control apparatus. The mixture in the filter is agitated by ultrasonic cavitation for a timed period and the filtrate is collected. The filtrate of each solvent extraction is collected individually and the residue on the filter element is collected to complete the extraction process. 4 figs.

  2. Organic-inorganic hybrid glass: non-linear optical properties

    NASA Astrophysics Data System (ADS)

    Domínguez Cruz, R.; Mendez-Perez, A.; Romero Galván, G.; Mendoza-Panduro, M.; Trejo-Duran, M.; Alvarado-Mendez, E.; Estudillo-Ayala, J. M.; Rojas-Laguna, R.; Martínez-Richa, A.; Castano, V. M.

    2008-04-01

    In this paper we report the preliminary results about the optical characterization of a new kind of organic-inorganic hybrid glass named 4-((5-dichloromethylsily1)-penty)oxy-cyanobenzene (DCN) synthesized by sol-gel process. We obtain the sign and magnitude of the sample by the Z-scan technique using a low power He-Ne laser at 632 nm in CW operation. The experimental data show that the DNC glass has a negative Kerr optical non-linearity and is estimated a nonlinear coefficient as Δn˜10-6.

  3. Modeling the Thermodynamics of Mixed Organic-Inorganic Aerosols to Predict Water Activities and Phase Equilibria

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Luo, B.; Peter, T.

    2008-12-01

    Tropospheric aerosol particles contain mixtures of inorganic salts, acids, water, and a large variety of organic compounds. Interactions between these substances in liquid mixtures lead to discrepancies from ideal thermodynamic behavior. While the thermodynamics of aqueous inorganic systems at atmospheric temperatures are well established, little is known about the physicochemistry of mixed organic-inorganic particles. Salting-out and salting-in effects result from organic-inorganic interactions and are used to improve industrial separation processes. In the atmosphere, they may influence the aerosol phases. Liquid-liquid phase separations into a mainly polar (aqueous) and a less polar organic phase may considerably influence the gas/particle partitioning of semi-volatile substances compared to a single phase estimation. Moreover, the phases present in the aerosol define the reaction medium for heterogeneous and multiphase chemistry occurring in aerosol particles. A correct description of these phases is needed when gas- or cloud-phase reaction schemes are adapted to aerosols. Non-ideal thermodynamic behavior in mixtures is usually described by an expression for the excess Gibbs energy. We present the group-contribution model AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients), which explicitly accounts for molecular interactions between solution constituents, both organic and inorganic, to calculate activities, chemical potentials and the total Gibbs energy of mixed systems. This model allows to compute vapor-liquid (VLE), liquid-liquid (LLE) and solid-liquid (SLE) equilibria within one framework. Focusing on atmospheric applications we considered eight different cations, five anions and a wide range of alcohols/polyols as organic compounds. With AIOMFAC, the activities of the components within an aqueous electrolyte solution are very well represented up to high ionic strength. We show that the semiempirical middle

  4. Controllable synthesis of organic-inorganic hybrid MoOx/polyaniline nanowires and nanotubes.

    PubMed

    Wang, Sinong; Gao, Qingsheng; Zhang, Yahong; Gao, Jing; Sun, Xuhui; Tang, Yi

    2011-02-01

    A novel chemical oxidative polymerization approach has been proposed for the controllable preparation of organic-inorganic hybrid MoO(x)/polyaniline (PANI) nanocomposites based on the nanowire precursor of Mo(3)O(10)(C(6)H(8)N)(2)·2H(2)O with sub-nanometer periodic structures. The nanotubes, nanowires, and rambutan-like nanoparticles of MoO(x)/PANI were successfully obtained through simply modulating the pH values to 2.5-3.5, ≈2.0 and ≈1.0, respectively. Through systematic physicochemical characterization, such as scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and so forth, the composition and structure of MoO(x)/PANI hybrid nanocomposites are well confirmed. It is found that the nanowire morphology of the precursor is the key to achieve the one-dimensional (1D) structures of final products. A new polymerization-dissolution mechanism is proposed to explain the formation of such products with different morphologies, in which the match between polymerization and dissolution processes of the precursor plays the important role. This approach will find a new way to controllably prepare various organic-inorganic hybrid 1D nanomaterials especially for polymer-hybrid nanostructures.

  5. Microscopic origin of entropy-driven polymorphism in hybrid organic-inorganic perovskite materials

    NASA Astrophysics Data System (ADS)

    Butler, Keith T.; Svane, Katrine; Kieslich, Gregor; Cheetham, Anthony K.; Walsh, Aron

    2016-11-01

    Entropy is a critical, but often overlooked, factor in determining the relative stabilities of crystal phases. The importance of entropy is most pronounced in softer materials, where small changes in free energy can drive phase transitions, which has recently been demonstrated in the case of organic-inorganic hybrid-formate perovskites. In this Rapid Communication we demonstrate the interplay between composition and crystal structure that is responsible for the particularly pronounced role of entropy in determining polymorphism in hybrid organic-inorganic materials. Using ab initio based lattice dynamics, we probe the origins and effects of vibrational entropy of four archetype perovskite (A B X3 ) structures. We consider an inorganic material (SrTiO3), an A -site hybrid-halide material (CH3NH3) PbI3 , a X -site hybrid material KSr (BH4)3 , and a mixed A - and X -site hybrid-formate material (N2H5) Zn (HCO2)3 , comparing the differences in entropy between two common polymorphs. The results demonstrate the importance of low-frequency intermolecular modes in determining the phase stability in these materials. The understanding gained allows us to propose a general principle for the relative stability of different polymorphs of hybrid materials as temperature is increased.

  6. Organic-Inorganic Hydrophobic Nanocomposite Film with a Core-Shell Structure.

    PubMed

    Liu, Peng; Chen, Ying; Yu, Zhiwu

    2016-12-17

    A method to prepare novel organic-inorganic hydrophobic nanocomposite films was proposed by a site-specific polymerization process. The inorganic part, the core of the nanocomposite, is a ternary SiO₂-Al₂O₃-TiO₂ nanoparticles, which is grafted with methacryloxy propyl trimethoxyl silane (KH570), and wrapped by fluoride and siloxane polymers. The synthesized samples are characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectrscopy, X-ray diffractometry (XRD), contact angle meter (CA), and scanning electron microscope (SEM). The results indicate that the novel organic-inorganic hydrophobic nanocomposite with a core-shell structure was synthesized successfully. XRD analysis reveals the nanocomposite film has an amorphous structure, and FTIR analysis indicates the nanoparticles react with a silane coupling agent (methacryloxy propyl trimethoxyl silane KH570). Interestingly, the morphology of the nanoparticle film is influenced by the composition of the core. Further, comparing with the film synthesized by silica nanoparticles, the film formed from SiO₂-Al₂O₃-TiO₂ nanoparticles has higher hydrophobic performance, i.e., the contact angle is greater than 101.7°. In addition, the TEM analysis reveals that the crystal structure of the particles can be changed at high temperatures.

  7. Organic-inorganic hybrid nanostructures for solar cell applications

    NASA Astrophysics Data System (ADS)

    AbdulAlmohsin, Samir M.

    The enticing electro-optical properties of nanostructured materials such as carbon nanotubes, graphene, CdS nanocrystals and ZnO nanowrie bring new vigor into the innovation of photovoltaics. The main purpose of this dissertation is to develop novel nano-structured materials for low cost solar cell applications. Fabrication, characterization, and solar cell application of organic-inorganic hybrid structures are the main focus of this research. Polyaniline (PANI)/multi-walled carbon nanotube (MWNT) composite films were synthesized by an electrochemical polymerization of aniline with airbrushed MWNTs on ITO substrates. It was found that the incorporation of MWNTs in PANI effectively increase the film conductivity with a percolation threshold of 5% of nanotubes in the composite. The solar cell performance strongly depends on the conductivity of the composite films, which can be tuned by adjusting nanotube concentration. A higher conductivity resulted in a better cell performance, resulting from an efficient charge collection. This study indicates that PANI/MWNT composite films with optimized conductivity are potentially useful for low-cost hybrid solar cell applications. CdS nanocrystal-sensitized solar cells (NCSSCs) were investigated by using polyaniline (PANI) as a replacement for conventional platinum counter electrode. The growth time of the nanocrystals significantly affects the solar cell performance. At an optimum growth, the NCSSCs exhibit 0.83% of the conversion efficiency in comparison to 0.13% for the identical cells without CdS nanocrystals. Electrochemical impedance spectroscopy showed that the charge transfer in the solar cells with CdS nanocrystals was improved. The enhanced overall energy conversion efficiency by nanocrystals is attributed to improved light absorption and suppressed recombination rate of interfacial charges at the injection, resulting in significantly improved charge transfer and electron lifetime. In addition, the PANI electrodes

  8. Growth, characterization and post-processing of inorganic and hybrid organic-inorganic thin films deposited using atomic and molecular layer deposition techniques

    NASA Astrophysics Data System (ADS)

    Abdulagatov, Aziz Ilmutdinovich

    Atomic layer deposition (ALD) and molecular layer deposition (MLD) are advanced thin film coating techniques developed for deposition of inorganic and hybrid organic-inorganic films respectively. Decreasing device dimensions and increasing aspect ratios in semiconductor processing has motivated developments in ALD. The beginning of this thesis will cover study of new ALD chemistry for high dielectric constant Y 2O3. In addition, the feasibility of conducting low temperature ALD of TiN and TiAlN is explored using highly reactive hydrazine as a new nitrogen source. Developments of these ALD processes are important for the electronics industry. As the search for new materials with more advanced properties continues, attention has shifted toward exploring the synthesis of hierarchically nanostructured thin films. Such complex architectures can provide novel functions important to the development of state of the art devices for the electronics industry, catalysis, energy conversion and memory storage as a few examples. Therefore, the main focus of this thesis is on the growth, characterization, and post-processing of ALD and MLD films for fabrication of novel composite (nanostructured) thin films. Novel composite materials are created by annealing amorphous ALD oxide alloys in air and by heat treatment of hybrid organic-inorganic MLD films in inert atmosphere (pyrolysis). The synthesis of porous TiO2 or Al2O3 supported V2O5 for enhanced surface area catalysis was achieved by the annealing of inorganic TiVxOy and AlV xOy ALD films in air. The interplay between phase separation, surface energy difference, crystallization, and melting temperature of individual oxides were studied for their control of film morphology. In other work, a class of novel metal oxide-graphitic carbon composite thin films was produced by pyrolysis of MLD hybrid organic-inorganic films. For example, annealing in argon of titania based hybrid films enabled fabrication of thin films of intimately

  9. Organic/Inorganic Hybrid Nanostructures for Chemical Plasmonic Sensors

    NASA Astrophysics Data System (ADS)

    Chang, Sehoon

    2011-12-01

    The work presented in this dissertation suggests novel design of chemical plasmonic sensors which have been developed based on Localized Surface Plasmon Resonance (LSPR), and Surface-enhanced Raman scattering (SERS) phenomena. The goal of the study is to understand the SERS phenomena for 3D hybrid (organic/inorganic) templates and to design of the templates for trace-level detection of selected chemical analytes relevant to liquid explosives and hazardous chemicals. The key design criteria for the development of the SERS templates are utilizing selective polymeric nanocoatings within cylindrical nanopores for promoting selective adsorption of chemical analyte molecules, maximizing specific surface area, and optimizing concentration of hot spots with efficient light interaction inside nanochannels. The organic/inorganic hybrid templates are optimized through a comprehensive understanding of the LSPR properties of the gold nanoparticles, gold nanorods, interaction of light with highly porous alumina template, and the choice of physical and chemical attributes of the selective coating. Furthermore, novel method to assemble silver nanoparticles in 3D as the active SERS-active substrate has been demonstrated by uniform, in situ growth of silver nanoparticles from electroless deposited silver seeds excluding any adhesive polymer layer on template. This approach can be the optimal for SERS sensing applications because it is not necessary to separate the Raman bands of the polyelectrolyte binding layer from those of the desired analyte. The fabrication method is an efficient, simple and fast way to assemble nanoparticles into 3D nanostructures. Addressable Raman markers from silver nanowire crossbars with silver nanoparticles are also introduced and studied. Assembly of silver nanowire crossbar structure is achieved by simple, double-step capillary transfer lithography. The on/off SERS properties can be observed on silver nanowire crossbars with silver nanoparticles

  10. Organic-inorganic interactions of single crystalline organolead halide perovskites studied by Raman spectroscopy.

    PubMed

    Xie, Li-Qiang; Zhang, Tai-Yang; Chen, Liang; Guo, Nanjie; Wang, Yu; Liu, Guo-Kun; Wang, Jia-Rui; Zhou, Jian-Zhang; Yan, Jia-Wei; Zhao, Yi-Xin; Mao, Bing-Wei; Tian, Zhong-Qun

    2016-07-21

    Organolead halide perovskites exhibit superior photoelectric properties, which have given rise to the perovskite-based solar cells whose power conversion efficiency has rapidly reached above 20% in the past few years. However, perovskite-based solar cells have also encountered problems such as current-voltage hysteresis and degradation under practical working conditions. Yet investigations into the intrinsic chemical nature of the perovskite material and its role on the performance of the solar cells are relatively rare. In this work, Raman spectroscopy is employed together with CASTEP calculations to investigate the organic-inorganic interactions in CH3NH3PbI3 and CH3NH3PbBr3-xClx perovskite single crystals with comparison to those having ammonic acid as the cations. For Raman measurements of CH3NH3PbI3, a low energy line of 1030 nm is used to avoid excitation of strong photoluminescence of CH3NH3PbI3. Raman spectra covering a wide range of wavenumbers are obtained, and the restricted rotation modes of CH3-NH3(+) embedded in CH3NH3PbBr3 (325 cm(-1)) are overwhelmingly stronger over the other vibrational bands of the cations. However, the band intensity diminishes dramatically in CH3NH3PbBr3-xClx and most of the bands shift towards high frequency, indicating the interaction with the halides. The details of such an interaction are further revealed by inspecting the band shift of the restricted rotation mode as well as the C-N, NH3(+) and CH3 stretching of the CH3NH3(+) as a function of Cl composition and length of the cationic ammonic acids. The results show that the CH3NH3(+) interacts with the PbX3(-) octahedral framework via the NH3(+) end through N(+)-HX hydrogen bonding whose strength can be tuned by the composition of halides but is insensitive to the size of the organic cations. Moreover, an increase of the Cl content strengthens the hydrogen bonding and thus blueshifts the C-N stretching bands. This is due to the fact that Cl is more electronegative than Br

  11. Formation of organic-inorganic nano/microcomposites using environmentally benign solvents or processes

    NASA Astrophysics Data System (ADS)

    Frankowski, David J.

    This dissertation involves development of organic/inorganic hybrids utilizing supercritical carbon dioxide (s0002), wherein at least one component has a characteristic length scale below 10 mum. One of the systems studied is a block copolymer (BC) comprising CO2-philic (polydimethylsiloxane) and metallated (polyferrocenylsilane) (PFS) blocks. The BC dissolves into the CO2-phase and forms soft nanostructures of varying size, shape and complexity depending on the pressure, temperature and time of exposure. The nanostructures were "harvested" upon depressurization and analyzed via transmission electron microscopy. Systems such as these are of particular relevance to the microelectronics sector, and this work is intended to open new avenues to novel materials that can be used therein. Another composite system focused not on the CO2-rich phase, but the polymer-rich phase and CO2-induced swelling and plasticization. Thin films of functionalized PFS homopolymer, a ceramic precursor, were exposed to S0002 in a high-pressure batch vessel at varying temperatures and pressures and for differing saturation times. Isotropic microcellular polymeric foams were produced similar to that for commodity polymers like poly(methylmethacrylate) and polystyrene (PS). Additionally, judicious parameter selection produced bimodal distributions of pore cells and anisotropic pore cells termed "V-directional" cells from the neat homopolymer. The final composite system comprised silicate (clay) platelets that serve as hard fillers with either nano- or micro-size scales depending on the platelet dispersion. Various fabrication techniques and formulations were explored and this dissertation describes a mechanism for producing intercalated or exfoliated nanocomposites (NCs) from an immiscible system. Exposure of the immiscible NC to an oxidative environment (i) breaks up polymer chains bridging the edges of the silicate platelets allowing a less obstructed pathway for intercalation and (ii) induces

  12. An organic-inorganic perovskite ferroelectric with large piezoelectric response

    NASA Astrophysics Data System (ADS)

    You, Yu-Meng; Liao, Wei-Qiang; Zhao, Dewei; Ye, Heng-Yun; Zhang, Yi; Zhou, Qionghua; Niu, Xianghong; Wang, Jinlan; Li, Peng-Fei; Fu, Da-Wei; Wang, Zheming; Gao, Song; Yang, Kunlun; Liu, Jun-Ming; Li, Jiangyu; Yan, Yanfa; Xiong, Ren-Gen

    2017-07-01

    Molecular piezoelectrics are highly desirable for their easy and environment-friendly processing, light weight, low processing temperature, and mechanical flexibility. However, although 136 years have passed since the discovery in 1880 of the piezoelectric effect, molecular piezoelectrics with a piezoelectric coefficient d33 comparable with piezoceramics such as barium titanate (BTO; ~190 picocoulombs per newton) have not been found. We show that trimethylchloromethyl ammonium trichloromanganese(II), an organic-inorganic perovskite ferroelectric crystal processed from aqueous solution, has a large d33 of 185 picocoulombs per newton and a high phase-transition temperature of 406 kelvin (K) (16 K above that of BTO). This makes it a competitive candidate for medical, micromechanical, and biomechanical applications.

  13. Recent NMR developments applied to organic-inorganic materials.

    PubMed

    Bonhomme, Christian; Gervais, Christel; Laurencin, Danielle

    2014-02-01

    In this contribution, the latest developments in solid state NMR are presented in the field of organic-inorganic (O/I) materials (or hybrid materials). Such materials involve mineral and organic (including polymeric and biological) components, and can exhibit complex O/I interfaces. Hybrids are currently a major topic of research in nanoscience, and solid state NMR is obviously a pertinent spectroscopic tool of investigation. Its versatility allows the detailed description of the structure and texture of such complex materials. The article is divided in two main parts: in the first one, recent NMR methodological/instrumental developments are presented in connection with hybrid materials. In the second part, an exhaustive overview of the major classes of O/I materials and their NMR characterization is presented. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. Organic/Inorganic Hybrid Polymer/Clay Nanocomposites

    NASA Technical Reports Server (NTRS)

    Park, Cheol; Connell, John W.; Smith, Joseph G., Jr.

    2003-01-01

    A novel class of polymer/clay nanocomposites has been invented in an attempt to develop transparent, lightweight, durable materials for a variety of aerospace applications. As their name suggests, polymer/ clay nanocomposites comprise organic/ inorganic hybrid polymer matrices containing platelet-shaped clay particles that have sizes of the order of a few nanometers thick and several hundred nanometers long. Partly because of their high aspect ratios and high surface areas, the clay particles, if properly dispersed in the polymer matrix at a loading level of 1 to 5 weight percent, impart unique combinations of physical and chemical properties that make these nanocomposites attractive for making films and coatings for a variety of industrial applications. Relative to the unmodified polymer, the polymer/ clay nanocomposites may exhibit improvements in strength, modulus, and toughness; tear, radiation, and fire resistance; and lower thermal expansion and permeability to gases while retaining a high degree of optical transparency.

  15. Giant photostriction in organic-inorganic lead halide perovskites

    NASA Astrophysics Data System (ADS)

    Zhou, Yang; You, Lu; Wang, Shiwei; Ku, Zhiliang; Fan, Hongjin; Schmidt, Daniel; Rusydi, Andrivo; Chang, Lei; Wang, Le; Ren, Peng; Chen, Liufang; Yuan, Guoliang; Chen, Lang; Wang, Junling

    2016-04-01

    Among the many materials investigated for next-generation photovoltaic cells, organic-inorganic lead halide perovskites have demonstrated great potential thanks to their high power conversion efficiency and solution processability. Within a short period of about 5 years, the efficiency of solar cells based on these materials has increased dramatically from 3.8 to over 20%. Despite the tremendous progress in device performance, much less is known about the underlying photophysics involving charge-orbital-lattice interactions and the role of the organic molecules in this hybrid material remains poorly understood. Here, we report a giant photostrictive response, that is, light-induced lattice change, of >1,200 p.p.m. in methylammonium lead iodide, which could be the key to understand its superior optical properties. The strong photon-lattice coupling also opens up the possibility of employing these materials in wireless opto-mechanical devices.

  16. Organic-inorganic materials containing nanoparticles of zirconium hydrophosphate for baromembrane separation

    NASA Astrophysics Data System (ADS)

    Dzyazko, Yuliya S.; Rozhdestvenskaya, Ludmila M.; Zmievskii, Yu G.; Vilenskii, Alexander I.; Myronchuk, Valerii G.; Kornienko, Ludmila V.; Vasilyuk, Sergey V.; Tsyba, Nikolay N.

    2015-02-01

    Organic-inorganic membranes were obtained by stepwise modification of poly(ethyleneterephthalate) track membrane with nanoparticles of zirconium hydrophosphate. The modifier was inserted inside pores of the polymer, a size of which is 0.33 μm. Inner active layer was formed by this manner. Evolution of morphology and functional properties of the membranes were investigated using methods of porosimetry, potentiometry and electron microscopy. The nanoparticles (4 to 10 nm) were found to form aggregates, which block pores of the polymer. Pores between the aggregates (4 to 8 nm) as well as considerable surface charge density provide significant transport numbers of counter ions (up to 0.86 for Na+). The materials were applied to baromembrane separation of corn distillery. It was found that precipitate is formed mainly inside the pores of the pristine membrane. In the case of the organic-inorganic material, the deposition occurs onto the outer surface and can be removed by mechanical way. Location of the active layer inside membranes protects it against damage.

  17. Fluorescent and cross-linked organic-inorganic hybrid nanoshells for monitoring drug delivery.

    PubMed

    Sun, Lijuan; Liu, Tianhui; Li, Hua; Yang, Liang; Meng, Lingjie; Lu, Qinghua; Long, Jiangang

    2015-03-04

    Functionalized and monodisperse nanoshells have attracted significant attention owing to their well-defined structure, unique properties, and wide range of potential applications. Here, the synthesis of cross-linked organic-inorganic hybrid nanoshells with strong fluorescence properties was reported via a facile precipitation polymerization of hexachlorocyclotriphosphazene (HCCP) and fluorescein on silica particles used as templates. The resulting poly(cyclotriphosphazene-co-fluorescein) (PCTPF) nanoshells were firm cross-linked shells with ∼2.2 nm mesopores that facilitated the transport of drug molecules. The fluorescent nanoshells also exhibited excellent water dispersibility and biocompatibility; thus, they can be considered as ideal drug vehicles with high doxorubicin storage capacity (26.2 wt %) and excellent sustained release (up to 14 days). Compared to doxorubicin (DOX) alone, the PCTPF nanoshells more efficiently delivered DOX into and killed cancer cells. Moreover, the PCTPF nanoshells also exhibited remarkable fluorescent emission properties and improved photobleaching stability in both suspension and solid state owing to the covalent immobilization of fluorescein in the highly cross-linked organic-inorganic hybrids. The exceptional fluorescent properties enabled the release of DOX as well as the distribution of nanoshells and DOX to be monitored.

  18. Efficient organic-inorganic hybrid Schottky solar cell: The role of built-in potential

    NASA Astrophysics Data System (ADS)

    Zhu, Yawen; Song, Tao; Zhang, Fute; Lee, Shuit-Tong; Sun, Baoquan

    2013-03-01

    The organic-inorganic hybrid Schottky solar cells based on solution processed poly(3,4-ethlenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in combination with silicon offer the merits of simple fabrication process and potential low cost. Here, we demonstrate that the work function (WF) of PEDOT:PSS films plays a critical role on the electronic output characteristics of the device. The WF of PEDOT:PSS is tuned by adding an aqueous solution of perfluorinated ionomer (PFI) due to its high electron affinity, which is compatible to fabricate the hybrid Si/PEDOT:PSS device. With an addition of 4% (weight) PFI into PEDOT:PSS, the device achieves a fill factor (FF) as high as 0.70 without sacrifice of open-circuit voltage and short-circuit current density, which improves 20% in comparison with the pristine PEDOT:PSS (0.58). The detailed electrical output measurements reveal that the high FF is ascribed to the enhanced built-in potential as well as suppression of charge recombination at organic-inorganic interface.

  19. Biomedical Applications of Magnetically Functionalized Organic/Inorganic Hybrid Nanofibers

    PubMed Central

    Lee, Hwa-Jeong; Lee, Sang Joon; Uthaman, Saji; Thomas, Reju George; Hyun, Hoon; Jeong, Yong Yeon; Cho, Chong-Su; Park, In-Kyu

    2015-01-01

    Nanofibers are one-dimensional nanomaterial in fiber form with diameter less than 1 µm and an aspect ratio (length/diameter) larger than 100:1. Among the different types of nanoparticle-loaded nanofiber systems, nanofibers loaded with magnetic nanoparticles have gained much attention from biomedical scientists due to a synergistic effect obtained from the unique properties of both the nanofibers and magnetic nanoparticles. These magnetic nanoparticle-encapsulated or -embedded nanofiber systems can be used not only for imaging purposes but also for therapy. In this review, we focused on recent advances in nanofibers loaded with magnetic nanoparticles, their biomedical applications, and future trends in the application of these nanofibers. PMID:26084046

  20. Biomedical Applications of Magnetically Functionalized Organic/Inorganic Hybrid Nanofibers.

    PubMed

    Lee, Hwa-Jeong; Lee, Sang Joon; Uthaman, Saji; Thomas, Reju George; Hyun, Hoon; Jeong, Yong Yeon; Cho, Chong-Su; Park, In-Kyu

    2015-06-15

    Nanofibers are one-dimensional nanomaterial in fiber form with diameter less than 1 µm and an aspect ratio (length/diameter) larger than 100:1. Among the different types of nanoparticle-loaded nanofiber systems, nanofibers loaded with magnetic nanoparticles have gained much attention from biomedical scientists due to a synergistic effect obtained from the unique properties of both the nanofibers and magnetic nanoparticles. These magnetic nanoparticle-encapsulated or -embedded nanofiber systems can be used not only for imaging purposes but also for therapy. In this review, we focused on recent advances in nanofibers loaded with magnetic nanoparticles, their biomedical applications, and future trends in the application of these nanofibers.

  1. Oysters produce an organic-inorganic adhesive for intertidal reef construction.

    PubMed

    Burkett, Jeremy R; Hight, Lauren M; Kenny, Paul; Wilker, Jonathan J

    2010-09-15

    Coastal ecosystems rely upon oyster reefs to filter water, provide protection from storms, and build habitat for other species. From a chemistry perspective, few details are available to illustrate how these shellfish construct such extensive reef systems. Experiments presented here show that oysters generate a biomineralized adhesive material for aggregating into large communities. This cement is an organic-inorganic hybrid and differs from the surrounding shells by displaying an alternate CaCO(3) crystal form, a cross-linked organic matrix, and an elevated protein content. Emerging themes and unique aspects are both revealed when comparing oyster cement to the adhesives of other marine organisms. The presence of cross-linked proteins provides an analogy to mussel and barnacle adhesives whereas the high inorganic content is exclusive to oysters. With a description of oyster cement in hand we gain strategies for developing synthetic composite materials as well as a better understanding of the components needed for healthy coastal environments.

  2. Organic-inorganic hybrid polyionic liquid based polyoxometalate as nano porous material for selective oxidation of sulfides

    NASA Astrophysics Data System (ADS)

    Rafiee, Ezzat; Shahebrahimi, Shabnam

    2017-07-01

    Organic-inorganic hybrid nano porous materials based on poly(ionic liquid)-polyoxometalate (PIL-POM) were reported. These hybrid materials were synthesized by the reaction of 4-vinyl pyridine with 1,3-propanesultone, followed by the polymerization and also sulfonate-functionalized cross-linked poly(4-vinylpyridine) and combining these polymers with H5PMo10V2O40 (PMo10V2). Activity of prepared PIL-PMo10V2 hybrids were investigated as catalysts for oxidation of sulfides with H2O2 as oxidant. For understanding catalytic activities of the PIL-PMo10V2 hybrids in oxidation of sulfides, effect of catalyst composition, substrate, and reaction conditions were studied. The results show that the PIL-PMo10V2 hybrids are active as selective heterogeneous catalysts for oxidation of sulfides and can be recovered and reused. The catalyst was characterized by FT-IR, TGA-DSC, XRD, SEM/EDX, BET, CV and zeta potential measurement. Also, average molecular weight of prepared catalysts were measured.

  3. Role of Dispersive Interactions in Determining Structural Properties of Organic-Inorganic Halide Perovskites: Insights from First-Principles Calculations.

    PubMed

    Egger, David A; Kronik, Leeor

    2014-08-07

    A microscopic picture of structure and bonding in organic-inorganic perovskites is imperative to understanding their remarkable semiconducting and photovoltaic properties. On the basis of a density functional theory treatment that includes both spin-orbit coupling and dispersive interactions, we provide detailed insight into the crystal binding of lead-halide perovskites and quantify the effect of different types of interactions on the structural properties. Our analysis reveals that cohesion in these materials is characterized by a variety of interactions that includes important contributions from both van der Waals interactions among the halide atoms and hydrogen bonding. We also assess the role of spin-orbit coupling and show that it causes slight changes in lead-halide bonding that do not significantly affect the lattice parameters. Our results establish that consideration of dispersive effects is essential for understanding the structure and bonding in organic-inorganic perovskites in general and for providing reliable theoretical predictions of structural parameters in particular.

  4. Isostructural organic-inorganic hybrid compounds: triethylcholine tribromidocadmate and triethylcholine tribromidomercurate.

    PubMed

    Wang, Dong-Yan; Hou, Xue-Li; Li, Xue-Nan

    2015-08-01

    In order to search for new anionic architectures and develop useful organic-inorganic hybrid materials in halometallate systems, two new crystalline organic-inorganic hybrid compounds have been prepared, i.e. catena-poly[triethyl(2-hydroxyethyl)azanium [[bromidocadmate(II)]-di-μ-bromido

  5. Dendrimer-based organic/inorganic hybrid nanoparticles in biomedical applications

    NASA Astrophysics Data System (ADS)

    Shen, Mingwu; Shi, Xiangyang

    2010-09-01

    This review reports some recent advances on the synthesis, self-assembly, and biofunctionalization of various dendrimer-based organic/inorganic hybrid nanoparticles (NPs) for various biomedical applications, including but not limited to protein immobilization, gene delivery, and molecular diagnosis. In particular, targeted molecular imaging of cancer using dendrimer-based organic/inorganic hybrid NPs will be introduced in detail.

  6. Thermodynamic Modeling of Organic-Inorganic Aerosols with the Group-Contribution Model AIOMFAC

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Luo, B. P.; Peter, T.

    2009-04-01

    Liquid aerosol particles are - from a physicochemical viewpoint - mixtures of inorganic salts, acids, water and a large variety of organic compounds (Rogge et al., 1993; Zhang et al., 2007). Molecular interactions between these aerosol components lead to deviations from ideal thermodynamic behavior. Strong non-ideality between organics and dissolved ions may influence the aerosol phases at equilibrium by means of liquid-liquid phase separations into a mainly polar (aqueous) and a less polar (organic) phase. A number of activity models exists to successfully describe the thermodynamic equilibrium of aqueous electrolyte solutions. However, the large number of different, often multi-functional, organic compounds in mixed organic-inorganic particles is a challenging problem for the development of thermodynamic models. The group-contribution concept as introduced in the UNIFAC model by Fredenslund et al. (1975), is a practical method to handle this difficulty and to add a certain predictability for unknown organic substances. We present the group-contribution model AIOMFAC (Aerosol Inorganic-Organic Mixtures Functional groups Activity Coefficients), which explicitly accounts for molecular interactions between solution constituents, both organic and inorganic, to calculate activities, chemical potentials and the total Gibbs energy of mixed systems (Zuend et al., 2008). This model enables the computation of vapor-liquid (VLE), liquid-liquid (LLE) and solid-liquid (SLE) equilibria within one framework. Focusing on atmospheric applications we considered eight different cations, five anions and a wide range of alcohols/polyols as organic compounds. With AIOMFAC, the activities of the components within an aqueous electrolyte solution are very well represented up to high ionic strength. We show that the semi-empirical middle-range parametrization of direct organic-inorganic interactions in alcohol-water-salt solutions enables accurate computations of vapor-liquid and liquid

  7. Giant barocaloric effect in the ferroic organic-inorganic hybrid [TPrA][Mn(dca)3] perovskite under easily accessible pressures.

    PubMed

    Bermúdez-García, Juan M; Sánchez-Andújar, Manuel; Castro-García, Socorro; López-Beceiro, Jorge; Artiaga, Ramón; Señarís-Rodríguez, María A

    2017-06-01

    The fast growing family of organic-inorganic hybrid compounds has recently been attracting increased attention owing to the remarkable functional properties (magnetic, multiferroic, optoelectronic, photovoltaic) displayed by some of its members. Here we show that these compounds can also have great potential in the until now unexplored field of solid-state cooling by presenting giant barocaloric effects near room temperature already under easily accessible pressures in the hybrid perovskite [TPrA][Mn(dca)3] (TPrA: tetrapropylammonium, dca: dicyanamide). Moreover, we propose that this will not be an isolated example for such an extraordinary behaviour as many other organic-inorganic hybrids (metal-organic frameworks and coordination polymers) exhibit the basic ingredients to display large caloric effects which can be very sensitive to pressure and other external stimuli. These findings open up new horizons and great opportunities for both organic-inorganic hybrids and for solid-state cooling technologies.

  8. Giant barocaloric effect in the ferroic organic-inorganic hybrid [TPrA][Mn(dca)3] perovskite under easily accessible pressures

    NASA Astrophysics Data System (ADS)

    Bermúdez-García, Juan M.; Sánchez-Andújar, Manuel; Castro-García, Socorro; López-Beceiro, Jorge; Artiaga, Ramón; Señarís-Rodríguez, María A.

    2017-06-01

    The fast growing family of organic-inorganic hybrid compounds has recently been attracting increased attention owing to the remarkable functional properties (magnetic, multiferroic, optoelectronic, photovoltaic) displayed by some of its members. Here we show that these compounds can also have great potential in the until now unexplored field of solid-state cooling by presenting giant barocaloric effects near room temperature already under easily accessible pressures in the hybrid perovskite [TPrA][Mn(dca)3] (TPrA: tetrapropylammonium, dca: dicyanamide). Moreover, we propose that this will not be an isolated example for such an extraordinary behaviour as many other organic-inorganic hybrids (metal-organic frameworks and coordination polymers) exhibit the basic ingredients to display large caloric effects which can be very sensitive to pressure and other external stimuli. These findings open up new horizons and great opportunities for both organic-inorganic hybrids and for solid-state cooling technologies.

  9. Multifunctional slow-release organic-inorganic compound fertilizer.

    PubMed

    Ni, Boli; Liu, Mingzhu; Lü, Shaoyu; Xie, Lihua; Wang, Yanfang

    2010-12-08

    Multifunctional slow-release organic-inorganic compound fertilizer (MSOF) has been investigated to improve fertilizer use efficiency and reduce environmental pollution derived from fertilizer overdosage. The special fertilizer is based on natural attapulgite (APT) clay used as a matrix, sodium alginate used as an inner coating and sodium alginate-g-poly(acrylic acid-co-acrylamide)/humic acid (SA-g-P(AA-co-AM)/HA) superabsorbent polymer used as an outer coating. The coated multielement compound fertilizer granules were produced in a pan granulator, and the diameter of the prills was in the range of 2.5-3.5 mm. The structural and chemical characteristics of the product, as well as its efficiency in slowing the nutrients release, were examined. In addition, a mathematical model for nutrient release from the fertilizer was applied to calculate the diffusion coefficient D of nutrients in MSOF. The degradation of the SA-g-P(AA-co-AM)/HA coating was assessed by examining the weight loss with incubation time in soil. It is demonstrated that the product prepared by a simple route with good slow-release property may be expected to have wide potential applications in modern agriculture and horticulture.

  10. Polyoxometalate-Based Organic-Inorganic Hybrids as Antitumor Drugs.

    PubMed

    Fu, Lei; Gao, Hanqin; Yan, Mei; Li, Shouzhu; Li, Xinyu; Dai, Zhifei; Liu, Shaoqin

    2015-06-24

    Polyoxometalates (POMs) have shown encouraging antitumor activity. However, their cytotoxicity in normal cells and unspecific interactions with biomolecules are two major obstacles that impede the practical applications of POMs in clinical cancer treatment. Derivatization of POMs with more biocompatible organic ligands is expected to cause a synergetic effect and achieve improved bioactivity and biospecificity. Herein, the synthesis of an amphiphilic organic-inorganic hybrid is reported by grafting a long-chain organoalkoxysilane lipid onto a POM. The amphiphilic POM hybrid could spontaneously assemble into the vesicles and exhibits enhanced antitumor activity for human colorectal cancer cell lines (HT29) compared to that of parent POMs. This detailed study reveals that the amphiphilic nature of POM hybrids enables the as-formed vesicles to easily bind to the cell membranes and then be uptaken by the cells, thus leading to a substantial increase in antitumor activity. Such prominent antitumor action is mostly accomplished via cell apoptosis, which ultimately results in cell death. Our finding demonstrates that novel POM hybrids-based drugs with increased bioactivity could be obtained by decorating POMs with selective organic ligands. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Laser Crystallization of Organic-Inorganic Hybrid Perovskite Solar Cells.

    PubMed

    Jeon, Taewoo; Jin, Hyeong Min; Lee, Seung Hyun; Lee, Ju Min; Park, Hyung Il; Kim, Mi Kyung; Lee, Keon Jae; Shin, Byungha; Kim, Sang Ouk

    2016-08-23

    Organic-inorganic hybrid perovskites attract enormous research interest for next generation solar energy harvest. Synergistic crystalline structures comprising organic and inorganic components enable solution processing of perovskite films. A reliable crystallization method for perovskites, compatible with fast continuous process over large-area flexible substrates, is crucial for high performance solar cell production. Here, we present laser crystallization of hybrid perovskite solar cells using near-infrared (NIR) laser (λ = 1064 nm). Crystalline morphology of CH3NH3PbI3 (MAPbI3) perovskite films are widely controllable with laser irradiation condition while maintaining film uniformity. Photothermal heating effectively assisted by interfacial photoconversion layers is critical for phase transformation without beam damage of multilayered device structures. Notably, laser crystallization attains higher device performances than conventional thermal annealing. Fast laser crystallization with manufacture level scan rate (1 m min(-1)) demonstrates inverted-type perovskite solar cells with 11.3 and 8.0% efficiencies on typical glass and flexible polymer substrates, respectively, without rigorous device optimization.

  12. The Dynamic Organic/Inorganic Interface of Colloidal PbS Quantum Dots.

    PubMed

    Grisorio, Roberto; Debellis, Doriana; Suranna, Gian Paolo; Gigli, Giuseppe; Giansante, Carlo

    2016-06-01

    Colloidal quantum dots are composed of nanometer-sized crystallites of inorganic semiconductor materials bearing organic molecules at their surface. The organic/inorganic interface markedly affects forms and functions of the quantum dots, therefore its description and control are important for effective application. Herein we demonstrate that archetypal colloidal PbS quantum dots adapt their interface to the surroundings, thus existing in solution phase as equilibrium mixtures with their (metal-)organic ligand and inorganic core components. The interfacial equilibria are dictated by solvent polarity and concentration, show striking size dependence (leading to more stable ligand/core adducts for larger quantum dots), and selectively involve nanocrystal facets. This notion of ligand/core dynamic equilibrium may open novel synthetic paths and refined nanocrystal surface-chemistry strategies. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Design of novel hybrid organic-inorganic nanostructured biomaterials for immunoassay applications.

    PubMed

    Andrade, G; Barbosa-Stancioli, E F; Piscitelli Mansur, A A; Vasconcelos, W L; Mansur, H S

    2006-12-01

    The purpose of this study was to develop novel hybrid organic-inorganic materials based on poly(vinyl alcohol) (PVA) polymer chemically crosslinked network to be tested as solid support on bovine herpesvirus immunoassay. Hybrids were synthesized by reacting PVA with three different alkoxysilanes modifying chemical groups: tetraethoxysilane (TEOS), 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-glycidoxypropyltrimethoxysilane (GPTMS). PVA-derived hybrids were also modified by chemically crosslinking with glutaraldehyde (GA) during the synthesis reaction. In order to investigate the structure in the nanometer-scale, PVA-derived hybrids were characterized by using small-angle x-ray scattering synchrotron radiation (SAXS) and x-ray diffraction (XRD). PVA hybrids' chemical functionalities and their interaction with herpesviruses were also characterized by Fourier transform infrared spectroscopy (FTIR). The bioactivity assays were tested through enzyme linked immunosorbent assay (ELISA). SAXS results have indicated nano-ordered disperse domains for PVA hybrids with different x-ray scattering patterns for PVA polymer and PVA-derived hybrids. FTIR spectra have shown major vibration bands associated with organic-inorganic chemical groups present in the PVA, PVA-derived by silane modifier and PVA chemically crosslinked by GA. The immunoassay results have shown that PVA hybrids with chemically functionalized structures regulated to some extent the specific bioimmobilization of herpesvirus onto solid phase. We think that it is due to the overall balance of forces associated with van der Waals interaction, hydrophilic and hydrophobic forces and steric hindrance acting at the surface. PVA and PVA-derived hybrid materials were successfully produced with GA crosslinking in a nanometer-scale network. Also, such a PVA-based material could be advantageously used in immunoassays with enhanced specificity for diagnosis.

  14. Electrical spin injection from an organic-based ferrimagnet in a hybrid organic/inorganic heterostructure

    NASA Astrophysics Data System (ADS)

    Johnston-Halperin, Ezekiel

    2012-02-01

    The development of organic-based magnets with room temperature magnetic ordering and semiconducting functionality promises to broaden the field of semiconductor spintronics, providing a route to all-organic spintronic devices and hybrid organic/inorganic structures capable of exploiting the multifunctionality and ease of production in organic systems as well as the well established spintronic functionality of inorganic materials. Our work demonstrates the successful extraction of spin polarized current from the organic-based room temperature ferrimagnetic semiconductor V[TCNE]x (x˜2, TCNE: tetracyanoethylene; TC > 400 K, EG ˜ 0.5 eV, σ˜ 10-2 S/cm) and its subsequent injection into a GaAs/AlGaAs light-emitting diode (LED) [1]. The spin current is detected by monitoring the polarization state of the photons emitted from the LED structure and tracks the magnetization of V[TCNE]x˜2, is weakly temperature dependent, and exhibits heavy hole / light hole asymmetry. This result opens the door to a new class of active, hybrid spintronic devices with multifunctional behavior defined by the optical, electronic and chemical sensitivity of the organic layer. In addition, spin transport in these hybrid structures provides the opportunity to leverage well-characterized inorganic materials as a probe of spin physics in organic and molecular systems and to explore the impact of the hybrid interface on spin injection efficiency. Initial studies exploring the impact of surface passivation of the inorganic layer with self-assembled monolayers of various chemistries will be presented, and additional experimental probes of the interfacial exchange interaction will be discussed. [4pt] [1] ``Electrical Spin Injection from an Organic-Based Ferrimagnet in a Hybrid Organic-Inorganic Heterostructure,'' Lei Fang, K. Deniz Bozdag, Chia-Yi Chen, P.A. Truitt, A.J. Epstein and E. Johnston-Halperin, Phys. Rev. Lett. 106, 156602 (2011).

  15. Direct control of the spatial arrangement of gold nanoparticles in organic-inorganic hybrid superstructures.

    PubMed

    Hermes, Jens P; Sander, Fabian; Peterle, Torsten; Cioffi, Carla; Ringler, Philippe; Pfohl, Thomas; Mayor, Marcel

    2011-04-04

    The directed assembly of gold nanoparticles is essential for their use in many kinds of applications, such as electronic devices, biological labels, and sensors. Herein an atomic alteration in the molecular structure of ligand-stabilized gold nanoparticles that can shift the interparticle distance up to 1 nm upon covalent coupling to organic-inorganic superstructures is presented. Gold nanoparticles are stabilized by two octadentate thioether ligands and have a mean diameter of 1.1 nm. The ligands contain a central rigid rod varying in length and terminally functionalized with a protected acetylene. The two peripheral functional groups on each particle enable the directed assembly of nanoparticles to dimers, trimers, and tetramers by oxidative acetylene coupling. This is a wet chemical protocol resulting in covalently bound nanoparticles. These organic-inorganic hybrid superstructures are analyzed by transmission electron microscopy, small angle X-ray scattering, and UV/vis spectroscopy. The focus of the comparison here is the subunit, which is anchoring the bridgehead, either a pyridine or benzene moiety. The pyridine-based ligands reflect the calculated length of the rigid-rod spacer in their interparticle distances in the obtained hybrid structures. This suggests a perpendicular arrangement that results from the coordination of the pyridine's lone pair to the gold surface. An atomic variation in the ligand's center leads to smaller interparticle distances in the case of hybrid structures obtained from benzene ligands. This large difference in the spatial arrangement suggests a tangential arrangement of the interparticle bridging structure in the latter case. Consequently a rather flat arrangement parallel to the particle surface must be assumed for the central benzene unit of the benzene-based ligand.

  16. Semiconducting organic-inorganic nanocomposites by intimately tethering conjugated polymers to inorganic tetrapods

    NASA Astrophysics Data System (ADS)

    Jung, Jaehan; Yoon, Young Jun; Lin, Zhiqun

    2016-04-01

    Semiconducting organic-inorganic nanocomposites were judiciously crafted by placing conjugated polymers in intimate contact with inorganic tetrapods via click reaction. CdSe tetrapods were first synthesized by inducing elongated arms from CdSe zincblende seeds through seed-mediated growth. The subsequent effective inorganic ligand treatment, followed by reacting with short bifunctional ligands, yielded azide-functionalized CdSe tetrapods (i.e., CdSe-N3). Finally, the ethynyl-terminated conjugated polymer poly(3-hexylthiophene) (i.e., P3HT-&z.tbd;) was tethered to CdSe-N3 tetrapods via a catalyst-free alkyne-azide cycloaddition, forming intimate semiconducting P3HT-CdSe tetrapod nanocomposites. Intriguingly, the intimate contact between P3HT and CdSe tetrapod was found to not only render the effective dispersion of CdSe tetrapods in the P3HT matrix, but also facilitate the efficient electronic interaction between these two semiconducting constituents. The successful anchoring of P3HT chains onto CdSe tetrapods was substantiated through Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy measurements. Moreover, the absorption and photoluminescence studies further corroborated the intimate tethering between P3HT and CdSe tetrapods. The effect of the type of bifunctional ligands (i.e., aryl vs. aliphatic ligands) and the size of tetrapods on the device performance of hybrid organic-inorganic solar cells was also scrutinized. Interestingly, P3HT-CdSe tetrapod nanocomposites produced via the use of an aryl bifunctional ligand (i.e., 4-azidobenzoic acid) exhibited an improved photovoltaic performance compared to that synthesized with their aliphatic ligand counterpart (i.e., 5-bromovaleric acid). Clearly, the optimal size of CdSe tetrapods ensuring the effective charge transport in conjunction with the good dispersion of CdSe tetrapods rendered an improved device performance. We envision that the click-reaction strategy enabled by

  17. Hybrid Perovskite Light-Emitting Diodes Based on Perovskite Nanocrystals with Organic-Inorganic Mixed Cations.

    PubMed

    Zhang, Xiaoli; Liu, He; Wang, Weigao; Zhang, Jinbao; Xu, Bing; Karen, Ke Lin; Zheng, Yuanjin; Liu, Sheng; Chen, Shuming; Wang, Kai; Sun, Xiao Wei

    2017-03-07

    Organic-inorganic hybrid perovskite materials with mixed cations have demonstrated tremendous advances in photovoltaics recently, by showing a significant enhancement of power conversion efficiency and improved perovskite stability. Inspired by this development, this study presents the facile synthesis of mixed-cation perovskite nanocrystals based on FA(1-x) Csx PbBr3 (FA = CH(NH2 )2 ). By detailed characterization of their morphological, optical, and physicochemical properties, it is found that the emission property of the perovskite, FA(1-x) Csx PbBr3 , is significantly dependent on the substitution content of the Cs cations in the perovskite composition. These mixed-cation perovskites are employed as light emitters in light-emitting diodes (LEDs). With an optimized composition of FA0.8 Cs0.2 PbBr3 , the LEDs exhibit encouraging performance with a highest reported luminance of 55 005 cd m(-2) and a current efficiency of 10.09 cd A(-1) . This work provides important instructions on the future compositional optimization of mixed-cation perovskite for obtaining high-performance LEDs. The authors believe this work is a new milestone in the development of bright and efficient perovskite LEDs.

  18. Catechol-functionalized chitosan/iron oxide nanoparticle composite inspired by mussel thread coating and squid beak interfacial chemistry.

    PubMed

    Zvarec, Ondrej; Purushotham, Sreekanth; Masic, Admir; Ramanujan, Raju V; Miserez, Ali

    2013-08-27

    Biological materials offer a wide range of multifunctional and structural properties that are currently not achieved in synthetic materials. Herein we report on the synthesis and preparation of bioinspired organic/inorganic composites that mimic the key physicochemical features associated with the mechanical strengthening of both squid beaks and mussel thread coatings using chitosan as an initial template. While chitosan is a well-known biocompatible material, it suffers from key drawbacks that have limited its usage in a wider range of structural biomedical applications. First, its load-bearing capability in hydrated conditions remains poor, and second it completely dissolves at pH < 6, preventing its use in mild acidic microenvironments. In order to overcome these intrinsic limitations, a chitosan-based organic/inorganic biocomposite is prepared that mimics the interfacial chemistry of squid beaks and mussel thread coating. Chitosan was functionalized with catechol moieties in a highly controlled fashion and combined with superparamagnetic iron oxide (γ-Fe2O3) nanoparticles to give composites that represent a significant improvement in functionality of chitosan-based biomaterials. The inorganic/organic (γ-Fe2O3/catechol) interfaces are stabilized and strengthened by coordination bonding, resulting in hybrid composites with improved stability at high temperatures, physiological pH conditions, and acid/base conditions. The inclusion of superparamagnetic particles also makes the composites stimuli-responsive.

  19. Hybrid Organic-Inorganic Perovskites on the Move.

    PubMed

    Egger, David A; Rappe, Andrew M; Kronik, Leeor

    2016-03-15

    Hybrid organic-inorganic perovskites (HOIPs) are crystals with the structural formula ABX3, where A, B, and X are organic and inorganic ions, respectively. While known for several decades, HOIPs have only in recent years emerged as extremely promising semiconducting materials for solar energy applications. In particular, power-conversion efficiencies of HOIP-based solar cells have improved at a record speed and, after only little more than 6 years of photovoltaics research, surpassed the 20% threshold, which is an outstanding result for a solution-processable material. It is thus of fundamental importance to reveal physical and chemical phenomena that contribute to, or limit, these impressive photovoltaic efficiencies. To understand charge-transport and light-absorption properties of semiconducting materials, one often invokes a lattice of ions displaced from their static positions only by harmonic vibrations. However, a preponderance of recent studies suggests that this picture is not sufficient for HOIPs, where a variety of structurally dynamic effects, beyond small harmonic vibrations, arises already at room temperature. In this Account, we focus on these effects. First, we review structure and bonding in HOIPs and relate them to the promising charge-transport and absorption properties of these materials, in terms of favorable electronic properties. We point out that HOIPs are much "softer" mechanically, compared to other efficient solar-cell materials, and that this can result in large ionic displacements at room temperature. We therefore focus next on dynamic structural effects in HOIPs, going beyond a static band-structure picture. Specifically, we discuss pertinent experimental and theoretical findings as to phase-transition behavior and molecular/octahedral rearrangements. We then discuss atomic diffusion phenomena in HOIPs, with an emphasis on the migration of intrinsic and extrinsic ionic species. From this combined perspective, HOIPs appear as highly

  20. Strontium-doped organic-inorganic hybrids towards three-dimensional scaffolds for osteogenic cells.

    PubMed

    John, Łukasz; Podgórska, Marta; Nedelec, Jean-Marie; Cwynar-Zając, Łucja; Dzięgiel, Piotr

    2016-11-01

    Biomimetic organic-inorganic hybrid bioscaffolds are developed to complement or replace damaged fragments in bone tissue surgery. The aim of this work was to develop a simple and fast method to prepare composite material for bone engineering, avoiding time consuming and complex methodologies. The resulting materials (also called in this work as hybrid composites or hybrid scaffolds) have a three-dimensional macroporous polymer-like network derived from triethoxyvinylsilane (TEVS) and 2-hydroxyethylmethacrylate (HEMA) monomers, with incorporated calcium, strontium, and phosphate ions. The materials were fully characterized using FT-IR, biomineralization studies, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy, scratch tests, Young's modulus and compressive strength tests, and gas physisorption. We report a comprehensive study on the in vitro effect of novel strontium doped materials on human bone cells. In vitro investigations were conducted using a normal human osteoblast cell line that mimics the cellular events of the in vivo intramembranous bone formation process. The materials do not have a negative impact on the survival of the normal human osteoblasts; moreover, materials doped with strontium show that not only are cells able to survive, but they also attach to and grow on a bioscaffolds surface. For this reason, they may be used in future in vivo experiments.

  1. Trap center study in hybrid organic-inorganic perovskite using thermally stimulated current (TSC) analysis

    NASA Astrophysics Data System (ADS)

    Gordillo, G.; Otálora, C. A.; Reinoso, M. A.

    2017-08-01

    This paper presents results of a study that allowed identifying states of traps in thin films of hybrid organic-inorganic perovskite compounds based on methylammonium lead halide with different compositions CH3NH3PbX3 (X is Cl, Br or I) prepared by spin-coating, through Thermally Stimulated Current (TSC) measurements. Special emphasis was done in studying the influence of the composition and adsorption of oxygen on the depth of traps and on the density of states associated with trapping centers. Deconvolution of the TSC curves obtained from measurements made inside a vacuum chamber under different oxygen partial pressures, revealed the presence of traps centers whose activation energies are affected by the oxygen concentration. It was also found that TSC peaks do not appear in TSC measurements carried out at pressures less than 0.1 mbar, indicating that the possible nature of the identified traps centers is related to oxygen adsorbed superficially and/or located into the grain boundaries.

  2. Adhesion in flexible organic and hybrid organic/inorganic light emitting device and solar cells

    SciTech Connect

    Yu, D.; Kwabi, D.; Akogwu, O.; Du, J.; Oyewole, O. K.; Tong, T.; Anye, V. C.; Rwenyagila, E.; Asare, J.; Fashina, A.; Soboyejo, W. O.

    2014-08-21

    This paper presents the results of an experimental study of the adhesion between bi-material pairs that are relevant to organic light emitting devices, hybrid organic/inorganic light emitting devices, organic bulk heterojunction solar cells, and hybrid organic/inorganic solar cells on flexible substrates. Adhesion between the possible bi-material pairs is measured using force microscopy (AFM) techniques. These include: interfaces that are relevant to organic light emitting devices, hybrid organic/inorganic light emitting devices, bulk heterojunction solar cells, and hybrid combinations of titanium dioxide (TiO{sub 2}) and poly(3-hexylthiophene). The results of AFM measurements are incorporated into the Derjaguin-Muller-Toporov model for the determination of adhesion energies. The implications of the results are then discussed for the design of robust organic and hybrid organic/inorganic electronic devices.

  3. Organic/Inorganic Hybrid Perovskite FETs for Electrically Injected Laser Action

    DTIC Science & Technology

    2015-09-01

    NUMBER Organic/Inorganic Hybrid Perovskite FETs for Electrically- Injected Laser Action Sb. GRANT NUMBER ONR N00014-15-1-2943 Sc. PROGRAM ELEMENT...laser action aimed towards current injecting laser. For these studies we will use cw, transient and laser action techn iques on electrostatically gated...Office of Naval Research (ONR) Final grant report _QNR N00014-15-1-2943 Organic/Inorganic Hybrid Perovskite FETs for Electrically- Injected Laser

  4. Preparation of silica-supported porous sorbent for heavy metal ions removal in wastewater treatment by organic-inorganic hybridization combined with sucrose and polyethylene glycol imprinting.

    PubMed

    Li, Feng; Du, Ping; Chen, Wei; Zhang, Shusheng

    2007-03-07

    A new porous sorbent for wastewater treatment of metal ions was synthesized by covalent grafting of molecularly imprinted organic-inorganic hybrid on silica gel. With sucrose and polyethylene glycol 4000 (PEG 4000) being synergic imprinting molecules, covalent surface coating on silica gel was achieved by using polysaccharide-incorporated sol-gel process starting from the functional biopolymer, chitosan and an inorganic epoxy-precursor, gamma-glycidoxypropyltrimethoxysiloxane (GPTMS) at room temperature. The prepared porous sorbent was characterized by using simultaneous thermogravimetry and differential scanning calorimeter (TG/DSC), scanning electron microscopy (SEM), nitrogen adsorption porosimetry measurement and X-ray diffraction (XRD). Copper ion, Cu(2+), was chosen as the model metal ion to evaluate the effectiveness of the new biosorbent in wastewater treatment. The influence of epoxy-siloxane dose, buffer pH and co-existed ions on Cu(2+) adsorption was assessed through batch experiments. The imprinted composite sorbent offered a fast kinetics for the adsorption of Cu(2+). The uptake capacity of the sorbent imprinted by two pore-building components was higher than those imprinted with only a single component. The dynamic adsorption in column underwent a good elimination of Cu(2+) in treating electric plating wastewater. The prepared composite sorbent exhibited high reusability. Easy preparation of the described porous composite sorbent, absence of organic solvents, cost-effectiveness and high stability make this approach attractive in biosorption.

  5. Organic-Inorganic Hybrid Polymers as Adsorbents for Removal of Heavy Metal Ions from Solutions: A Review

    PubMed Central

    Samiey, Babak; Cheng, Chil-Hung; Wu, Jiangning

    2014-01-01

    Over the past decades, organic-inorganic hybrid polymers have been applied in different fields, including the adsorption of pollutants from wastewater and solid-state separations. In this review, firstly, these compounds are classified. These compounds are prepared by sol-gel method, self-assembly process (mesopores), assembling of nanobuilding blocks (e.g., layered or core-shell compounds) and as interpenetrating networks and hierarchically structures. Lastly, the adsorption characteristics of heavy metals of these materials, including different kinds of functional groups, selectivity of them for heavy metals, effect of pH and synthesis conditions on adsorption capacity, are studied. PMID:28788483

  6. Chemical and structural changes in polyamide based organic-inorganic hybrid materials upon incorporation of SeS2O62- precursor

    NASA Astrophysics Data System (ADS)

    Krylova, V.; Dukstienė, N.; Žalenkienė, S.; Baltrusaitis, J.

    2017-01-01

    Composite organic-inorganic functional materials are of significant importance in various applications of science and technology. In this work, physicochemical characterization of such composite materials obtained after the exposure of polyamide PA 6 to K2SeS2O6 precursor solution was performed. Chalcogenized polymer surface was characterized using X-ray diffraction, infrared, and UV-vis spectroscopies while their bulk chemical analysis was performed using atomic absorption spectroscopy. Crystallite size was not found to change with the exposure to K2SeS2O6 precursor but PA 6 chain-chain separation decreased. Importantly, infrared and X-ray analyses showed chemical bonding taking place between the PA 6 and SeS2O62- ions via -NH- functional group. A distinct change in bandgap, Eg, value was observed in UV-vis spectra due to the presence of SeS2O62-, SeSO32- and Se2S2O62- ions formed via decomposition of the precursor material in acidic medium. After extended 4 h chalcogenation a distinct absorption due to the elemental selenium was also observed as obtained from Tauc plots.

  7. General Deposition of Metal-Organic Frameworks on Highly Adaptive Organic-Inorganic Hybrid Electrospun Fibrous Substrates.

    PubMed

    Liu, Chang; Wu, Yi-Nan; Morlay, Catherine; Gu, Yifan; Gebremariam, Binyam; Yuan, Xiao; Li, Fengting

    2016-02-03

    Electrospun nanofibrous mats are ideal substrates for metal-organic frameworks (MOFs) crystal deposition because of their specific structural parameters and chemical tenability. In this work, we utilized organic-inorganic hybrid electrospun fibrous mats as support material to study the deposition of various MOF particles. HKUST-1 and MIL-53(Al) were produced through solvothermal method, while ZIF-8 and MIL-88B(Fe) were prepared using microwave-induced heating method. The synthesis procedure for both methods were simple and effective because the hybrid nanofibrous mats showed considerable affinity to MOF particles and could be used without additional modifications. The obtained MOF composites exhibited effective incorporation between MOF particles and the porous substrates. MIL-53(Al) composite was applied as fibrous sorbent and showed enhanced adsorption capacity and removal rate, as well as easier operation, compared with thepowdered sample. Moreover, MIL-53(Al) composite was easier to be regenerated compared with powder form.

  8. Phase Behavior of Block Copolymer directed Nanostructured Organic/Inorganic Hybrids

    NASA Astrophysics Data System (ADS)

    Wiesner, Ulrich

    2002-03-01

    The study of amphiphilic polymer based polymer-ceramic hybrid materials is an exciting emerging research area offering enormous scientific and technological promise. By choice of the appropriate block copolymer system (PI-b-PEO) as well as ceramic precursors (organically modified ceramic precursors, ormocers) unprecedented morphology control on the nanoscale is obtained. It is based on a unique polymer-ceramic interface that can be characterized in detail by solid-state NMR measurements. The hydrophilic parts of the block copolymers are completely integrated into the ceramic phase, analogous to what is often found in biological hybrid materials. The resulting composites can be described as a 'quasi two-phase system' allowing for a more rational hybrid morphology design based on the current understanding of the phase behavior of block copolymers and copolymer-homopolymer mixtures. The structures generated on the nanoscale are a result of a fine balance of competing interactions, another feature of complex biological systems. In the present contribution the synthesis and characterization of nanostructured hybrids based on aluminosilicates will be described. Besides morphologies known from other polymer studies the existence of a 'Plumber's Nightmare' phase is suggested. This indicates subtle, not yet understood differences of the ternary 'pseudo' phase diagram (morphology diagram) of these systems to behavior of conventional block copolymers. Implications of these findings for further explorations of the complex phase space of the present novel nanostructured organic-inorganic hybrid systems will be discussed.

  9. Amphiphilic Organic-Inorganic Hybrid Zeotype Aluminosilicate like a Nanoporous Crystallized Langmuir-Blodgett Film.

    PubMed

    Ikeda, Takuji; Hiyoshi, Norihito; Matsuura, Shun-ichi; Kodaira, Tetsuya; Nakaoka, Takuma; Irisa, Ami; Kawano, Miki; Yamamoto, Katsutoshi

    2015-06-26

    A new organic-inorganic hybrid zeotype compound with amphiphilic one-dimensional nanopore and aluminosilicate composition was developed. The framework structure is composed of double aluminosilicate layers and 12-ring nanopores; a hydrophilic layer pillared by Q(2) silicon atom species and a lipophilic layer pillared by phenylene groups are alternately stacked, and 12-ring nanopores perpendicularly penetrate the layers. The framework topology looks similar to that of an AFI-type zeolite but possesses a quasi-multidimensional pore structure consisting of a 12-ring channel and intersecting small pores equivalent to 8-rings. The hybrid material with alternately laminated lipophilic and hydrophilic nanospaces can be assumed as a crystallized Langmuir-Blodgett film. It demonstrates microporous adsorption for both hydrophilic and lipophilic adsorptives, and its outer surface tightly adsorbs lysozyme whose molecular size is much larger than its micropore opening. Our results suggest the possibility of designing porous adsorbent with high amphipathicity. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Organic inorganic dye filler for polymer: blue-coloured layered double hydroxides into polystyrene.

    PubMed

    Marangoni, Rafael; Taviot-Guého, Christine; Illaik, Abdallah; Wypych, Fernando; Leroux, Fabrice

    2008-10-15

    A series of blue dye molecules, Evans blue (EB), Chicago sky blue (CB), Niagara blue (NB) were incorporated by direct co-precipitation within the galleries of negatively charge layered double hydroxide (LDH). The materials of cation composition Zn/Al = 2 lead to well-defined organic inorganic assemblies. The molecular arrangement of the interleaved dye molecule is proposed by 1D electronic density projection along the stacking direction for the hydrothermally treated samples with alternatively a highly inclined orientation of EB and CB and a parallel-bilayer arrangement for NB. Blue coloured LDH assemblies were subsequently dispersed into polystyrene (PS). It was found that the hybrid fillers do not interfere in the radical polymerization of styrene, giving rise to similar molecular weight and polydispersity than filler free PS, while higher glass transition temperatures were obtained for the nanocomposites. This was consistent with the rheological behaviour with the observation for LDH/NB filler based nanocomposite of shear thinning exponent different from zero, underlining frictional interaction between filler and PS chain. The absorption maximum slightly blue-shifted for the hybrid filler in comparison to the corresponding organic dye was found unmodified for the PS nanocomposite, thus giving rise to blue coloured plastic films, reminiscent somehow of the blue Maya effect.

  11. Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications.

    PubMed

    Zhao, Yixin; Zhu, Kai

    2016-02-07

    Organic and inorganic hybrid perovskites (e.g., CH(3)NH(3)PbI(3)), with advantages of facile processing, tunable bandgaps, and superior charge-transfer properties, have emerged as a new class of revolutionary optoelectronic semiconductors promising for various applications. Perovskite solar cells constructed with a variety of configurations have demonstrated unprecedented progress in efficiency, reaching about 20% from multiple groups after only several years of active research. A key to this success is the development of various solution-synthesis and film-deposition techniques for controlling the morphology and composition of hybrid perovskites. The rapid progress in material synthesis and device fabrication has also promoted the development of other optoelectronic applications including light-emitting diodes, photodetectors, and transistors. Both experimental and theoretical investigations on organic-inorganic hybrid perovskites have enabled some critical fundamental understandings of this material system. Recent studies have also demonstrated progress in addressing the potential stability issue, which has been identified as a main challenge for future research on halide perovskites. Here, we review recent progress on hybrid perovskites including basic chemical and crystal structures, chemical synthesis of bulk/nanocrystals and thin films with their chemical and physical properties, device configurations, operation principles for various optoelectronic applications (with a focus on solar cells), and photophysics of charge-carrier dynamics. We also discuss the importance of further understanding of the fundamental properties of hybrid perovskites, especially those related to chemical and structural stabilities.

  12. Photo-induced halide redistribution in organic-inorganic perovskite films.

    PubMed

    deQuilettes, Dane W; Zhang, Wei; Burlakov, Victor M; Graham, Daniel J; Leijtens, Tomas; Osherov, Anna; Bulović, Vladimir; Snaith, Henry J; Ginger, David S; Stranks, Samuel D

    2016-05-24

    Organic-inorganic perovskites such as CH3NH3PbI3 are promising materials for a variety of optoelectronic applications, with certified power conversion efficiencies in solar cells already exceeding 21%. Nevertheless, state-of-the-art films still contain performance-limiting non-radiative recombination sites and exhibit a range of complex dynamic phenomena under illumination that remain poorly understood. Here we use a unique combination of confocal photoluminescence (PL) microscopy and chemical imaging to correlate the local changes in photophysics with composition in CH3NH3PbI3 films under illumination. We demonstrate that the photo-induced 'brightening' of the perovskite PL can be attributed to an order-of-magnitude reduction in trap state density. By imaging the same regions with time-of-flight secondary-ion-mass spectrometry, we correlate this photobrightening with a net migration of iodine. Our work provides visual evidence for photo-induced halide migration in triiodide perovskites and reveals the complex interplay between charge carrier populations, electronic traps and mobile halides that collectively impact optoelectronic performance.

  13. Photo-induced halide redistribution in organic-inorganic perovskite films

    NASA Astrophysics Data System (ADS)

    Dequilettes, Dane W.; Zhang, Wei; Burlakov, Victor M.; Graham, Daniel J.; Leijtens, Tomas; Osherov, Anna; Bulović, Vladimir; Snaith, Henry J.; Ginger, David S.; Stranks, Samuel D.

    2016-05-01

    Organic-inorganic perovskites such as CH3NH3PbI3 are promising materials for a variety of optoelectronic applications, with certified power conversion efficiencies in solar cells already exceeding 21%. Nevertheless, state-of-the-art films still contain performance-limiting non-radiative recombination sites and exhibit a range of complex dynamic phenomena under illumination that remain poorly understood. Here we use a unique combination of confocal photoluminescence (PL) microscopy and chemical imaging to correlate the local changes in photophysics with composition in CH3NH3PbI3 films under illumination. We demonstrate that the photo-induced `brightening' of the perovskite PL can be attributed to an order-of-magnitude reduction in trap state density. By imaging the same regions with time-of-flight secondary-ion-mass spectrometry, we correlate this photobrightening with a net migration of iodine. Our work provides visual evidence for photo-induced halide migration in triiodide perovskites and reveals the complex interplay between charge carrier populations, electronic traps and mobile halides that collectively impact optoelectronic performance.

  14. Development of hybrid organic-inorganic surface imprinted Mn-doped ZnS QDs and their application as a sensing material for target proteins.

    PubMed

    Tan, Lei; Huang, Cong; Peng, Rongfei; Tang, Youwen; Li, Weiming

    2014-11-15

    Applying molecular imprinting techniques to the surface of functionalized quantum dots (QDs) allows the preparation of molecularly imprinted polymers (MIPs) with accessible, surface exposed binding sites and excellent optical properties. This paper demonstrates a new strategy for producing such hybrid organic-inorganic imprinted Mn-doped ZnS QDs for specific recognition of bovine hemoglobin. The technique provides surface grafting imprinting in aqueous solutions using amino modified Mn-doped ZnS QDs as supports, acrylamide and methacrylic acid as functional monomers, γ-methacryloxypropyl trimethoxy silane as the grafting agent, and bovine hemoglobin as a template. The amino propyl functional monomer layer directs the selective occurrence of imprinting polymerization at the QDs surface through copolymerization of grafting agents with functional monomers, but also acts as an assistive monomer to drive the template into the formed polymer shells to create effective recognition sites. Using MIP-QDs composites as a fluorescence sensing material, trace amounts of bovine hemoglobin are signaled with high selectivity by emission intensity changes of Mn-doped ZnS QDs, which is embedded into the imprinted polymers.

  15. Supramolecular organization in organic-inorganic heterogeneous hybrid catalysts formed from polyoxometalate and poly(ampholyte) polymer.

    PubMed

    Raj, Gijo; Swalus, Colas; Guillet, Alain; Devillers, Michel; Nysten, Bernard; Gaigneaux, Eric M

    2013-04-02

    Hybridization of polyoxometalates (POMs) via the formation of an organic-inorganic association constitutes a new route to develop a heterogeneous POM catalyst with tunable functionality imparted through supramolecular assembly. Herein, we report on strategies to obtain tunable well-defined supramolecular architectures of an organic-inorganic heterogeneous hybrid catalyst formed by the association of a hydrophobically substituted polyampholyte copolymer (poly N, N-diallyl-N-hexylamine-alt-maleic acid) and phosphotungstic acid (H3PW12O40) POMs. The self-assembling property of the initial polyampholyte copolymer matrix is modulated by controlling the pH of the hybridization solution. When deposited on a mica surface, isolated, long and extended polymer chains are formed under basic conditions (pH 7.9), while globular or coiled structures are formed under acidic conditions (pH 2). The supramolecular assembly of the POM-polymer hybrid is found to be directed by the type and quantities of charges present on the polyampholyte copolymer, which themselves depend on the pH conditions. The hypothesis is that the Keggin type [PW12O40](3-) anions, which have a size of ~1 nm, electrostatically bind to the positive charge sites of the polymer backbone. The hybrid material stabilized at pH 5.3 consists of POM-decorated polymer chains. Statistical analysis of distances between pairs of POM entities show narrow density distributions, suggesting that POM entities are attached to the polymer chains with a high level of order. Conversely, under acidic conditions (pH 2), the hybrid shows the formation of a core-shell type of structure. The strategies reported here, to tune the supramolecular assembly of organic-inorganic hybrid materials, are highly valuable for the design and a more rational utilization of POM heterogeneous catalysts in several chemical transformations.

  16. Fabrication of a new type of organic-inorganic hybrid superlattice films combined with titanium oxide and polydiacetylene

    PubMed Central

    2012-01-01

    We fabricated a new organic-inorganic hybrid superlattice film using molecular layer deposition [MLD] combined with atomic layer deposition [ALD]. In the molecular layer deposition process, polydiacetylene [PDA] layers were grown by repeated sequential adsorption of titanium tetrachloride and 2,4-hexadiyne-1,6-diol with ultraviolet polymerization under a substrate temperature of 100°C. Titanium oxide [TiO2] inorganic layers were deposited at the same temperatures with alternating surface-saturating reactions of titanium tetrachloride and water. Ellipsometry analysis showed a self-limiting surface reaction process and linear growth of the nanohybrid films. The transmission electron microscopy analysis of the titanium oxide cross-linked polydiacetylene [TiOPDA]-TiO2 thin films confirmed the MLD growth rate and showed that the films are amorphous superlattices. Composition and polymerization of the films were confirmed by infrared spectroscopy. The TiOPDA-TiO2 nanohybrid superlattice films exhibited good thermal and mechanical stabilities. PACS: 81.07.Pr, organic-inorganic hybrid nanostructures; 82.35.-x, polymerization; 81.15.-z, film deposition; 81.15.Gh, chemical vapor deposition (including plasma enhanced CVD, MOCVD, ALD, etc.). PMID:22221520

  17. Fabrication of a new type of organic-inorganic hybrid superlattice films combined with titanium oxide and polydiacetylene.

    PubMed

    Yoon, Kwan-Hyuck; Han, Kyu-Seok; Sung, Myung-Mo

    2012-01-05

    We fabricated a new organic-inorganic hybrid superlattice film using molecular layer deposition [MLD] combined with atomic layer deposition [ALD]. In the molecular layer deposition process, polydiacetylene [PDA] layers were grown by repeated sequential adsorption of titanium tetrachloride and 2,4-hexadiyne-1,6-diol with ultraviolet polymerization under a substrate temperature of 100°C. Titanium oxide [TiO2] inorganic layers were deposited at the same temperatures with alternating surface-saturating reactions of titanium tetrachloride and water. Ellipsometry analysis showed a self-limiting surface reaction process and linear growth of the nanohybrid films. The transmission electron microscopy analysis of the titanium oxide cross-linked polydiacetylene [TiOPDA]-TiO2 thin films confirmed the MLD growth rate and showed that the films are amorphous superlattices. Composition and polymerization of the films were confirmed by infrared spectroscopy. The TiOPDA-TiO2 nanohybrid superlattice films exhibited good thermal and mechanical stabilities.PACS: 81.07.Pr, organic-inorganic hybrid nanostructures; 82.35.-x, polymerization; 81.15.-z, film deposition; 81.15.Gh, chemical vapor deposition (including plasma enhanced CVD, MOCVD, ALD, etc.).

  18. Crystallization behavior of PA6/SiO{sub 2} organic-inorganic hybrid material

    SciTech Connect

    Wang Hualin; Shi Tiejun . E-mail: stjdean@hfut.edu.cn; Yang Shanzhong; Hang Guopei

    2006-02-02

    Poly 2-hydroxy propylmethacrylate-methyl methacrylate/SiO{sub 2} (PHPMA-MMA/SiO{sub 2}), an active composite was used to synthesize polyamide-6/SiO{sub 2} (PA6/SiO{sub 2}) organic-inorganic hybrid materials via blending method. X-ray diffraction analysis (XRD) results showed that the addition of PHPMA-MMA/SiO{sub 2} composite induced PA6 to transit from {alpha} to {gamma} crystal form. The nonisothermal crystallization kinetics of PA6 and PA6/SiO{sub 2} hybrid materials was investigated by differential scanning calorimetry (DSC). Jeziorny method derived from Avrami analysis and a method developed by Liu were employed to describe the nonisothermal crystallization process of PA6 and PA6/SiO{sub 2} hybrid materials. Based on our experimental data, if the relative degree of crystallinity was approximately 60% or more, the Jeziorny method was not valid to describe the nonisothermal crystallization process, while Liu method was successful to describe the whole nonisothermal crystallization process. When X(t) was below about 60%, the crystallization rates of PA6 and PA6/SiO{sub 2} hybrid materials were very approximate, but when X(t) was approximately 60% or more, the crystallization rate of PA6 was quicker than that of PA6/SiO{sub 2} hybrid materials. Moreover, the addition of PHPMA-MMA/SiO{sub 2} composite decreased the crystallization activation energy {delta}E calculated by Kissinger equation because of the {gamma} transition.

  19. Organic/Inorganic Hybrid Nanocomposite Infrared Photodetection by Intraband Absorption

    NASA Astrophysics Data System (ADS)

    Lantz, Kevin Richard

    The ability to detect infrared radiation is vital for a host of applications that include optical communication, medical diagnosis, thermal imaging, atmospheric monitoring, and space science. The need to actively cool infrared photon detectors increases their operation cost and weight, and the focus of much recent research has been to limit the dark current and create room-temperature infrared photodetectors appropriate for mid-to-long-wave infrared detection. Quantum dot infrared photodetectors (QDIPs) provide electron quantum confinement in three dimensions and have been shown to demonstrate high temperature operation (T>150 K) due to lower dark currents. However, these inorganic devices have not achieved sensitivity comparable to state-of-the-art photon detectors, due in large part to the inability to control the uniformity (size and shape) of QDs during strained-layer epitaxy. The purpose of this dissertation research was to investigate the feasibility of room-temperature infrared photodetection that could overcome the shortfalls of QDIPs by using chemically synthesized inorganic colloidal quantum dots (CQDs). CQDs are coated with organic molecules known as surface ligands that prevent the agglomeration of dots while in solution. When CQDs are suspended in a semiconducting organic polymer, these materials are known as organic/inorganic hybrid nanocomposites. The novel approach investigated in this work was to use intraband transitions in the conduction band of the polymer-embedded CQD for room-temperature photodetection in the mid-wave, and possibly long-wave, infrared ranges. Hybrid nanocomposite materials promise room-temperature operation due to: (i) large bandgaps of the inorganic CQDs and the semiconducting polymer that reduce thermionic emission; and (ii) low dark current due to the three-dimensional electron confinement in the CQD and low carrier mobility in the semiconducting polymer. The primary material system investigated in this research was Cd

  20. Electronic Structure Approach to Tunable Electronic Properties of Hybrid Organic-Inorganic Perovskites

    NASA Astrophysics Data System (ADS)

    Liu, Garnett; Huhn, William; Mitzi, David B.; Kanai, Yosuke; Blum, Volker

    We present a study of the electronic structure of layered hybrid organic-inorganic perovskite (HOIP) materials using all-electron density-functional theory. Varying the nature of the organic and inorganic layers should enable systematically fine-tuning the carrier properties of each component. Using the HSE06 hybrid density functional including spin-orbit coupling (SOC), we validate the principle of tuning subsystem-specific parts of the electron band structures and densities of states in CH3NH3PbX3 (X=Cl, Br, I) compared to a modified organic component in layered (C6H5C2H4NH3) 2PbX4 (X=Cl, Br, I) and C20H22S4N2PbX4 (X=Cl, Br, I). We show that tunable shifts of electronic levels indeed arise by varying Cl, Br, I as the inorganic components, and CH3NH3+ , C6H5C2H4NH3+ , C20H22S4N22 + as the organic components. SOC is found to play an important role in splitting the conduction bands of the HOIP compounds investigated here. The frontier orbitals of the halide shift, increasing the gap, when Cl is substituted for Br and I.

  1. Magnetic mesoporous organic-inorganic NiCo2O4 hybrid nanomaterials for electrochemical immunosensors.

    PubMed

    Li, Qunfang; Zeng, Lingxing; Wang, Jinchao; Tang, Dianping; Liu, Bingqian; Chen, Guonan; Wei, Mingdeng

    2011-04-01

    This study demonstrates a facile and feasible strategy toward the development of advanced electrochemical immunosensors based on chemically functionalized magnetic mesoporous organic-inorganic hybrid nanomaterials, and the preparation, characterization, and measurement of relevant properties of the immunosensor for detection of carcinoembryonic antigen (CEA, as a model analyte) in clinical immunoassays. The as-prepared nanomaterials composed of a magnetic mesoporous NiCo(2)O(4) nanosheet, an interlayer of Nafion/thionine organic molecules and a nanogold layer show good adsorption properties for the attachment of horseradish peroxidase-labeled secondary anti-CEA antibody (HRP-anti-CEA). With a sandwich-type immunoassay format, the functional bionanomaterials present good analytical properties to facilitate and modulate the way it was integrated onto the electrochemical immunosensors, and allows the detection of CEA at a concentration as low as 0.5 pg/mL. Significantly, the immunosensor could be easily regenerated by only using an external magnet without the need of any dissociated reagents. Importantly, the as-synthesized magnetic mesoporous NiCo(2)O(4) nanomaterials could be further extended for detection of other biomarkers or biocompounds.

  2. Design and synthesis of organic-inorganic hybrid capsules for biotechnological applications.

    PubMed

    Shi, Jiafu; Jiang, Yanjun; Wang, Xiaoli; Wu, Hong; Yang, Dong; Pan, Fusheng; Su, Yanlei; Jiang, Zhongyi

    2014-08-07

    Organic-inorganic hybrid capsules, which typically possess a hollow lumen and a hybrid wall, have emerged as a novel and promising class of hybrid materials and have attracted enormous attention. In comparison to polymeric capsules or inorganic capsules, the hybrid capsules combine the intrinsic physical/chemical properties of the organic and inorganic moieties, acquire more degrees of freedom to manipulate multiple interactions, create hierarchical structures and integrate multiple functionalities. Thus, the hybrid capsules exhibit superior mechanical strength (vs. polymeric capsules) and diverse functionalities (vs. inorganic capsules), which may give new opportunities to produce high-performance materials. Much effort has been devoted to exploring innovative and effective methods for the synthesis of hybrid capsules that exhibit desirable performance in target applications. This tutorial review firstly presents a brief description of the capsular structure and hybrid materials in nature, then classifies the hybrid capsules into molecule-hybrid capsules and nano-hybrid capsules based upon the size of the organic and inorganic moieties in the capsule wall, followed by a detailed discussion of the design and synthesis of the hybrid capsules. For each kind of hybrid capsule, the state-of-the-art synthesis methods are described in detail and a critical comment is embedded. The applications of these hybrid capsules in biotechnological areas (biocatalysis, drug delivery, etc.) have also been summarized. Hopefully, this review will offer a perspective and guidelines for the future research and development of hybrid capsules.

  3. Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells.

    SciTech Connect

    Hsu, Julia, W. P.

    2008-09-01

    Solar energy conversion is increasingly being recognized as one of the principal ways to meet future energy needs without causing detrimental environmental impact. Hybrid organic-inorganic solar cells (SCs) are attracting particular interest due to the potential for low cost manufacturing and for use in new applications, such as consumer electronics, architectural integration and light-weight sensors. Key materials advantages of these next generation SCs over conventional semiconductor SCs are in design opportunities--since the different functions of the SCs are carried out by different materials, there are greater materials choices for producing optimized structures. In this project, we explore the hybrid organic-inorganic solar cell system that consists of oxide, primarily ZnO, nanostructures as the electron transporter and poly-(3-hexylthiophene) (P3HT) as the light-absorber and hole transporter. It builds on our capabilities in the solution synthesis of nanostructured semiconducting oxide arrays to this photovoltaic (PV) technology. The three challenges in this hybrid material system for solar applications are (1) achieving inorganic nanostructures with critical spacing that matches the exciton diffusion in the polymer, {approx} 10 nm, (2) infiltrating the polymer completely into the dense nanostructure arrays, and (3) optimizing the interfacial properties to facilitate efficient charge transfer. We have gained an understanding and control over growing oriented ZnO nanorods with sub-50 nm diameters and the required rod-to-rod spacing on various substrates. We have developed novel approaches to infiltrate commercially available P3HT in the narrow spacing between ZnO nanorods. Also, we have begun to explore ways to modify the interfacial properties. In addition, we have established device fabrication and testing capabilities at Sandia for prototype devices. Moreover, the control synthesis of ZnO nanorod arrays lead to the development of an efficient anti

  4. Toxicology of organic-inorganic hybrid molecules: bio-organometallics and its toxicology.

    PubMed

    Fujie, Tomoya; Hara, Takato; Kaji, Toshiyuki

    2016-01-01

    Bio-organometallics is a research strategy of biology that uses organic-inorganic hybrid molecules. The molecules are expected to exhibit useful bioactivities based on the unique structure formed by interaction between the organic structure and intramolecular metal(s). However, studies on both biology and toxicology of organic-inorganic hybrid molecules have been incompletely performed. There can be two types of toxicological studies of bio-organometallics; one is evaluation of organic-inorganic hybrid molecules and the other is analysis of biological systems from the viewpoint of toxicology using organic-inorganic hybrid molecules. Our recent studies indicate that cytotoxicity of hybrid molecules containing a metal that is nontoxic in inorganic forms can be more toxic than that of hybrid molecules containing a metal that is toxic in inorganic forms when the structure of the ligand is the same. Additionally, it was revealed that organic-inorganic hybrid molecules are useful for analysis of biological systems important for understanding the toxicity of chemical compounds including heavy metals.

  5. Characteristics of organic-inorganic hybrid sols prepared from colloidal silica and multifunctional organoalkoxysilanes

    NASA Astrophysics Data System (ADS)

    Lee, Hyeon Hwa; Park, Hoy Yul; Kang, Dong Jun

    2015-01-01

    The characteristics of organic-inorganic hybrid coatings that were prepared well from surfacemodified silicate sols were studied. The surface-modified silicate sols were fabricated in a two-step sol-gel process involving nano-silicates and silanes by varying the type of silane and the reaction time. The synthesized oraganosilane-treated silicate hybrid sols were confirmed using Fouriertransform infrared (FT-IR) spectroscopy. The viscosity of the sols increased with increasing number of alkoxy functional groups in the organoalkoxysilane and the transmittance of the sol solutions decreased with increasing reaction time. The thermal stability of the hybrid coatings increased with increasing amount of inorganic components. The surface roughness of the coatings depended highly on the homogeneity of the sol solutions. In addition, the contact angle of the hybrid coatings increased as the length of the alkyl chain decreased. Importantly, stabilized hybrid sols and coatings with well-controlled surface and thermal propreties were successfully fabricated by controlling the organoalkoxysilanes and the reaction time.

  6. Rashba and Dresselhaus Effects in Hybrid Organic-Inorganic Perovskites: From Basics to Devices.

    PubMed

    Kepenekian, Mikaël; Robles, Roberto; Katan, Claudine; Sapori, Daniel; Pedesseau, Laurent; Even, Jacky

    2015-12-22

    We use symmetry analysis, density functional theory calculations, and k·p modeling to scrutinize Rashba and Dresselhaus effects in hybrid organic-inorganic halide perovskites. These perovskites are at the center of a recent revolution in the field of photovoltaics but have also demonstrated potential for optoelectronic applications such as transistors and light emitters. Due to a large spin-orbit coupling of the most frequently used metals, they are also predicted to offer a promising avenue for spin-based applications. With an in-depth inspection of the electronic structures and bulk lattice symmetries of a variety of systems, we analyze the origin of the spin splitting in two- and three-dimensional hybrid perovskites. It is shown that low-dimensional nanostructures made of CH3NH3PbX3 (X = I, Br) lead to spin splittings that can be controlled by an applied electric field. These findings further open the door for a perovskite-based spintronics.

  7. N-channel field-effect transistors with an organic-inorganic layered perovskite semiconductor

    NASA Astrophysics Data System (ADS)

    Matsushima, Toshinori; Mathevet, Fabrice; Heinrich, Benoît; Terakawa, Shinobu; Fujihara, Takashi; Qin, Chuanjiang; Sandanayaka, Atula S. D.; Ribierre, Jean-Charles; Adachi, Chihaya

    2016-12-01

    Large electron injection barriers and electrode degradation are serious issues that need to be overcome to obtain n-channel operation in field-effect transistors with an organic-inorganic layered perovskite (C6H5C2H4NH3)2SnI4 semiconductor. By employing low-work-function Al source/drain electrodes and by inserting C60 layers between the perovskite semiconductor and the Al electrodes to reduce the injection barrier and to suppress the electrode degradation, we demonstrate n-channel perovskite transistors with electron mobilities of up to 2.1 cm2/V s, the highest value ever reported in spin-coated perovskite transistors. The n-channel transport properties of these transistors are relatively stable in vacuum but are very sensitive to oxygen, which works as electron traps in perovskite and C60 layers. In addition, grazing-incidence X-ray scattering and thermally stimulated current measurements revealed that crystallite size and electron traps largely affect the n-channel transport properties.

  8. A covalently-linked microporous organic-inorganic hybrid framework containing polyhedral oligomeric silsesquioxane moieties.

    PubMed

    Peng, Ye; Ben, Teng; Xu, Jun; Xue, Ming; Jing, Xiaofei; Deng, Feng; Qiu, Shilun; Zhu, Guangshan

    2011-03-28

    By a Yamamoto-type of Ullmann cross-coupling reaction, a well-defined covalently-linked microporous organic-inorganic hybrid framework polyoctaphenylsilsesquioxane (JUC-Z1) was effectively prepared from the nano building block p-iodio-octaphenylsilsesquioxane (I8OPS) with a yield of ca. 100%. The structure of JUC-Z1 was characterized by (13)C CP/MAS NMR and (29)Si MAS NMR experiments. Fourier transform infrared spectroscopy (FTIR) was performed to confirm the presence of functions in the framework. The results showed that inorganic silsesquioxane cubes were linearly covalently-linked by biphenyls, offering a highly cross-coupling framework. The powder X-ray diffraction (PXRD) pattern and transmission electron microscope (TEM) image show that JUC-Z1 is spherical with uniform micropores. N(2) adsorption results suggest that the hybrid framework has a narrow pore size distribution from 11.8 to 20.0 Å, with a BET surface area of 283 m(2)g(-1) and a pore volume of 0.226 cm(3)g(-1). A thermogravimetric (TG) analysis indicates the thermal stability of JUC-Z1 up to 397 °C in air. Moreover, a liquid sorption experiment reveals the favorable sorption of benzene and water.

  9. Ratiometric fluorescence detection of silver ions using thioflavin T-based organic/inorganic hybrid supraparticles.

    PubMed

    Li, Yan-Yun; Zhang, Min; Lu, Ling-Fei; Zhu, Anwei; Xia, Fei; Zhou, Tianshu; Shi, Guoyue

    2015-09-07

    In this work, we present a new type of functional organic/inorganic hybrid supraparticle that spontaneously assembles from silver ions (Ag(+)), iodide ions (I(-)) and thioflavin T (ThT) under aqueous solution conditions. ThT alone in aqueous solution was weakly fluorescent with an emission band at 494 nm, which was related to the monomer. However, in the above-mentioned hybrid supraparticle (i.e., ThT@AgI SP) structure, the ThT monomer can form a dimer with a new emission band. The new band shifted to 546 nm and the emission intensity increased. We further present a facile strategy of reversible fluorescence switching of ThT by a simple cation (Ag(+)) and anions (I(-) and S(2-)), which can be employed for the ratiometric fluorescence detection of Ag(+) with high sensitivity and selectivity. The linear range of detecting Ag(+) was from 100 nM to 10 μM, with a limit of detection as low as approximately 50 nM. Moreover, it can be successfully applied for the operation of a logic gate system and to the sensing of Ag(+) in real water samples.

  10. Real-Space Imaging of the Atomic Structure of Organic-Inorganic Perovskite.

    PubMed

    Ohmann, Robin; Ono, Luis K; Kim, Hui-Seon; Lin, Haiping; Lee, Michael V; Li, Youyong; Park, Nam-Gyu; Qi, Yabing

    2015-12-30

    Organic-inorganic perovskite is a promising class of materials for photovoltaic applications and light emitting diodes. However, so far commercialization is still impeded by several drawbacks. Atomic-scale effects have been suggested to be possible causes, but an unequivocal experimental view at the atomic level is missing. Here, we present a low-temperature scanning tunneling microscopy study of single crystal methylammonium lead bromide CH3NH3PbBr3. Topographic images of the in situ cleaved perovskite surface reveal the real-space atomic structure. Compared to the bulk we observe modified arrangements of atoms and molecules on the surface. With the support of density functional theory we explain these by surface reconstruction and a substantial interplay of the orientation of the polar organic cations (CH3NH3)(+) with the position of the hosting anions. This leads to structurally and electronically distinct domains with ferroelectric and antiferroelectric character. We further demonstrate local probing of defects, which may also impact device performance.

  11. PWA-diureasils organic-inorganic hybrids. Photochromism and effect of the organic chain length

    NASA Astrophysics Data System (ADS)

    Obara, P. A.; Sarmento, V. H. V.; Ribeiro, S. J. L.; Nalin, M.; Molina, C.

    2015-08-01

    Di-ureasil organic-inorganic hybrids have been used together with Phosphotungstic acid (PWA- H3PW12O40) in the preparation of new photochromic materials. PWA was incorporated in different relative concentrations in di-ureasils displaying different organic chain lengths. The structure and photochromic behaviour of these novel material were investigated by means of infrared (FTIR), photoluminescence (PL) and Ultraviolet-Visible (UV-Vis) spectroscopies and Small Angle X-ray Scattering (SAXS) technique as a function of PWA content and also of the polymer chain length. Eu3+ has been incorporated as probe ion. For the short polymer chains, europium and PWA keggin structures are located close to oxygen in the ether type of the polyoxides segments and for the long polymer chain carbonyl groups of the urea units were observed to contribute in the coordination. Moreover, the photochromic effect was followed by UV-Vis measurements which showed that in both hybrid families changing from colorless to blue after UV exposure, and the bleaching process, depend directly on the polymer chain length and the nature of the sites where PWA are coordinated in the matrix.

  12. Optical Generation of Ballistic and Diffusive Spin Currents in Organic-Inorganic Lead Halide Perovskites

    NASA Astrophysics Data System (ADS)

    Li, Junwen; Haney, Paul

    Organic-inorganic halide perovskite solar cells have attracted enormous attention in recent years due to their remarkable photovoltaic power conversion efficiency. These materials should exhibit interesting spin-dependent properties as well, owing to the strong spin-orbit coupling and the broken inversion symmetry present at room temperature. In this work, we consider the spin-dependent optical response of CH3NH3PbI3 on two distinct time scales. We first use density functional theory to compute the ballistic spin current injected by absorption of linearly polarized light. This spin current persists on a time scale of the momentum relaxation time. We then consider diffusive transport of photogenerated charge and spin for a thin perovskite layer with a passivated surface and an Ohmic, non-selective back contact. The spin densities and spin currents are evaluated by solving the drift-diffusion equations for a 3-dimensional Rashba model. We comment on the applications of optically excited spin densities and spin currents in these materials.

  13. Medical applications of organic-inorganic hybrid materials within the field of silica-based bioceramics.

    PubMed

    Vallet-Regí, María; Colilla, Montserrat; González, Blanca

    2011-02-01

    Research on bioceramics has evolved from the use of inert materials for mere substitution of living tissues towards the development of third-generation bioceramics aimed at inducing bone tissue regeneration. Within this context hybrid bioceramics have remarkable features resulting from the synergistic combination of both inorganic and organic components that make them suitable for a wide range of medical applications. Certain bioceramics, such as ordered mesoporous silicas, can exhibit different kind of interaction with organic molecules to develop different functions. The weak interaction of these host matrixes with drug molecules confined in the mesoporous channels allows these hybrid systems to be used as controlled delivery devices. Moreover, mesoporous silicas can be used to fabricate three (3D)-dimensional scaffolds for bone tissue engineering. In this last case, different osteoinductive agents (peptides, hormones and growth factors) can be strongly grafted to the bioceramic matrix to act as attracting signals for bone cells to promote bone regeneration process. Finally, recent research examples of organic-inorganic hybrid bioceramics, such as stimuli-responsive drug delivery systems and nanosystems for targeting of cancer cells and gene transfection, are also tackled in this tutorial review (64 references).

  14. Impedimetric and amperometric bifunctional glucose biosensor based on hybrid organic-inorganic thin films.

    PubMed

    Wang, Huihui; Ohnuki, Hitoshi; Endo, Hideaki; Izumi, Mitsuru

    2015-02-01

    A novel glucose biosensor with an immobilized mediator was studied using electrochemical impedance spectroscopy (EIS) and amperometry measurements. The biosensor has a characteristic ultrathin form and is composed of a self-assembled monolayer anchoring glucose oxidase (GOx) covered with Langmuir-Blodgett (LB) films of Prussian blue (PB). The immobilized PB in the LB films acts as a mediator and enables the biosensor to work under a low potential (0.0V vs. Ag/AgCl). In the EIS measurements, a dramatic decrease in charge transfer resistance (Rct) was observed with sequential addition of glucose, which can be attributed to enzymatic activity. The linearity of the biosensor response was observed by the variation of the sensor response (1/Rct) as a function of glucose concentration in the range 0 to 25mM. The sensor also showed linear amperometric response below 130mM glucose. The organic-inorganic system of GOx and PB nanoclusters demonstrated bifunctional sensing action, both amperometry and EIS modes, as well as long sensing stability for 4 days.

  15. An unconventional route to monodisperse and intimately contacted semiconducting organic-inorganic nanocomposites.

    PubMed

    Xu, Hui; Pang, Xinchang; He, Yanjie; He, Ming; Jung, Jaehan; Xia, Haiping; Lin, Zhiqun

    2015-04-07

    We developed an unconventional route to produce uniform and intimately contacted semiconducting organic-inorganic nanocomposites for potential applications in thermoelectrics. By utilizing amphiphilic star-like PAA-b-PEDOT diblock copolymer as template, monodisperse PEDOT-functionalized lead telluride (PbTe) nanoparticles were crafted via the strong coordination interaction between PAA blocks of star-like PAA-b-PEDOT and the metal moieties of precursors (i.e., forming PEDOT-PbTe nanocomposites). As the inner PAA blocks are covalently connected to the outer PEDOT blocks, the PEDOT chains are intimately and permanently tethered on the PbTe nanoparticle surface, thereby affording a well-defined PEDOT/PbTe interface, which prevents the PbTe nanoparticles from aggregation, and more importantly promotes the long-term stability of PEDOT-PbTe nanocomposites. We envision that the template strategy is general and robust, and offers easy access to other conjugated polymer-inorganic semiconductor nanocomposites for use in a variety of applications.

  16. Organometallic Iridium Complex Containing a Dianionic, Tridentate, Mixed Organic-Inorganic Ligand.

    PubMed

    Bloomfield, Aaron J; Matula, Adam J; Mercado, Brandon Q; Batista, Victor S; Crabtree, Robert H

    2016-08-15

    A pentamethylcyclopentadienyl-iridium complex containing a tricyclic, dianionic, tridentate, scorpionate (facial binding), mixed organic-inorganic ligand was synthesized and characterized by single-crystal X-ray crystallography, as well as polynuclear NMR, UV-vis, and IR spectroscopies. The central cycle of the tridentate ligand consists of a modified boroxine in which two of the boron centers are tetrahedral, anionic borates. The complex is stable to hydrolysis in aqueous solution for >9 weeks at 25 °C but reacts with a 50 mM solution of sodium periodate within 12 s to form a periodate-driven oxygen evolution catalyst that has a turnover frquency of >15 s(-1). However, the catalyst is almost completely deactivated within 5 min, achieving an average turnover number of ca. 2500 molecules of oxygen per atom of iridium. Nanoparticles were not observed on this time scale but did form within 4 h of catalyst activation under these experimental conditions. The parent complex was modeled using density functional theory, which accurately reflected the geometry of the complex and indicated significant interaction of iridium- and boracycle-centered orbitals.

  17. Charge transfer at organic-inorganic interfaces—Indoline layers on semiconductor substrates

    NASA Astrophysics Data System (ADS)

    Meyenburg, I.; Falgenhauer, J.; Rosemann, N. W.; Chatterjee, S.; Schlettwein, D.; Heimbrodt, W.

    2016-12-01

    We studied the electron transfer from excitons in adsorbed indoline dye layers across the organic-inorganic interface. The hybrids consist of indoline derivatives on the one hand and different inorganic substrates (TiO2, ZnO, SiO2(0001), fused silica) on the other. We reveal the electron transfer times from excitons in dye layers to the organic-inorganic interface by analyzing the photoluminescence transients of the dye layers after femtosecond excitation and applying kinetic model calculations. A correlation between the transfer times and four parameters have been found: (i) the number of anchoring groups, (ii) the distance between the dye and the organic-inorganic interface, which was varied by the alkyl-chain lengths between the carboxylate anchoring group and the dye, (iii) the thickness of the adsorbed dye layer, and (iv) the level alignment between the excited dye ( π* -level) and the conduction band minimum of the inorganic semiconductor.

  18. Combined organic-inorganic fouling of forward osmosis hollow fiber membranes.

    PubMed

    Arkhangelsky, Elizabeth; Wicaksana, Filicia; Tang, Chuyang; Al-Rabiah, Abdulrahman A; Al-Zahrani, Saeed M; Wang, Rong

    2012-12-01

    This research focused on combined organic-inorganic fouling and cleaning studies of forward osmosis (FO) membranes. Various organic/inorganic model foulants such as sodium alginate, bovine serum albumin (BSA) and silica nanoparticles were applied to polyamide-polyethersulfone FO hollow fiber membranes fabricated in our laboratory. In order to understand all possible interactions, experiments were performed with a single foulant as well as combinations of foulants. Experimental results suggested that the degree of FO membrane fouling could be promoted by synergistic effect of organic foulants, the presence of divalent cations, low cross-flow velocity and high permeation drag force. The water flux of fouled FO hollow fibers could be fully restored by simple physical cleaning. It was also found that hydrodynamic regime played an important role in combined organic-inorganic fouling of FO membranes.

  19. Ultrahigh and Broad Spectral Photodetectivity of an Organic-Inorganic Hybrid Phototransistor for Flexible Electronics.

    PubMed

    Rim, You Seung; Yang, Yang Micheal; Bae, Sang-Hoon; Chen, Huajun; Li, Chao; Goorsky, Mark S; Yang, Yang

    2015-11-18

    The creation of new organic-inorganic phototransistors with high and broad spectral photosensitivity is reported. The extended charge transport and photoconductivity between the layers in the bilayer structure results in a notable detectivity of over 10(12) Jones and a linear dynamic range of over 100 dB at a broad spectral bandwidth across the UV-NIR range. Furthermore, the considerably reduced persistent photocurrent effect of In-Ga-Zn-O (IGZO)-based hybrid phototransistors is first demonstrated via an organic-inorganic bilayer approach.

  20. Crystal orientations in nacreous layers of organic-inorganic biocomposites

    SciTech Connect

    Lee, Seung Woo

    2009-09-15

    Abalone shell comprises a bio-composite material, combining the properties of inorganic calcite intergrown with organic nacre. This paper reports about the microstructure of this composite. By examining the Kikuchi patterns obtained for nacre (Haliotis discus hannai) using transmission electron microscopy, we have shown that the tiles within nacre have specific orientations. The stereographic projection spheres for the tiles of nacre can be divided into two main types, namely a right oriented region and a left oriented region with respect to the c axis as a reference plane (001). The cluster character of nacre can be explained in terms of the growth mechanism of the 'Christmas tree' pattern. The orientation of the c-axis in the nacreous layer is elucidated for the first time. We demonstrate the use of the soluble protein obtained from the tiles of nacre in in vitro calcium carbonate crystallization.

  1. A Mechanistic Explanation of the Peculiar Amphiphobic Properties of Hybrid Organic-Inorganic Coatings by Combining XPS Characterization and DFT Modeling.

    PubMed

    Motta, Alessandro; Cannelli, Oliviero; Boccia, Alice; Zanoni, Robertino; Raimondo, Mariarosa; Caldarelli, Aurora; Veronesi, Federico

    2015-09-16

    We report a combined X-ray photoelectron spectroscopy and theoretical modeling analysis of hybrid functional coatings constituted by fluorinated alkylsilane monolayers covalently grafted on a nanostructured ceramic oxide (Al2O3) thin film deposited on aluminum alloy substrates. Such engineered surfaces, bearing hybrid coatings obtained via a classic sol-gel route, have been previously shown to possess amphiphobic behavior (superhydrophobicity plus oleophobicity) and excellent durability, even under simulated severe working environments. Starting from XPS, SEM, and contact angle results and analysis, and combining it with DFT results, the present investigation offers a first mechanistic explanation at a molecular level of the peculiar properties of the hybrid organic-inorganic coating in terms of composition and surface structural arrangements. Theoretical modeling shows that the active fluorinated moiety is strongly anchored on the alumina sites with single Si-O-Al bridges and that the residual valence of Si is saturated by Si-O-Si bonds which form a reticulation with two vicinal fluoroalkylsilanes. The resulting hybrid coating consists of stable rows of fluorinated alkyl chains in reciprocal contact, which form well-ordered and packed monolayers.

  2. Aerosol-based fabrication of biocompatible organic-inorganic nanocomposites.

    PubMed

    Byeon, Jeong Hoon; Roberts, Jeffrey T

    2012-05-01

    Several novel nanoparticle composites were conveniently obtained by appropriately reacting freshly produced aerosol metal nanoparticles with soluble organic components. A serial reactor consisting of a spark particle generator coupled to a collison atomizer was used to fabricate the new materials, which included nanomagnetosols (comprising iron nanoparticles, the drug ketoprofen, and a Eudragit shell), hybrid nanogels (comprising iron nanoparticles and an N-isopropylacrylamide, NIPAM, gel), and nanoinorganics (gold immobilized silica). A fourth hybrid material, consisting of iron-gold nanoparticles and NIPAM) was obtained via an aerosol into liquid configuration, in which aerosol iron-gold particles were collected into a NIPAM/ethanol solution and then formed into nanogels with NIPAM under ultrasonic treatment. The strategy outlined in this work is potentially generalizable as a new platform for creating biocompatible nanocomposites, using only clinically approved starting materials in a single pass and under low-temperature conditions.

  3. Auto-organisation of hybrid organic-inorganic materials prepared by sol-gel process.

    PubMed

    Boury, Bruno; Corriu, Robert J P

    2002-04-21

    Silica-based hybrid organic-inorganic materials prepared by sol-gel chemistry exhibit chemical and physical properties revealing their anisotropic organisation. Besides the opportunities that this phenomenon opens for the preparation of new materials, it also provides arguments to the chemist looking for a better comprehension and control of the organisation of solids.

  4. Reactivity II: A Second Foundation-Level Course in Integrated Organic, Inorganic, and Biochemistry

    ERIC Educational Resources Information Center

    Schaller, Chris P.; Graham, Kate J.; McIntee, Edward J.; Jones, T. Nicholas; Johnson, Brian J.

    2016-01-01

    A foundation-level course is described that integrates material related to reactivity in organic, inorganic, and biochemistry. Designed for second-year students, the course serves majors in chemistry, biochemistry, and biology, as well as prehealth-professions students. Building on an earlier course that developed concepts of nucleophiles and…

  5. Reactivity III: An Advanced Course in Integrated Organic, Inorganic, and Biochemistry

    ERIC Educational Resources Information Center

    Schaller, Chris P.; Graham, Kate J.; Jakubowski, Henry V.

    2017-01-01

    Reactivity III is a new course that presents chemical reactions from the domains of organic, inorganic, and biochemistry that are not readily categorized by electrophile-nucleophile interactions. Many of these reactions involve the transfer of a single electron, in either an intermolecular fashion in the case of oxidation/reduction reactions or an…

  6. Reactivity II: A Second Foundation-Level Course in Integrated Organic, Inorganic, and Biochemistry

    ERIC Educational Resources Information Center

    Schaller, Chris P.; Graham, Kate J.; McIntee, Edward J.; Jones, T. Nicholas; Johnson, Brian J.

    2016-01-01

    A foundation-level course is described that integrates material related to reactivity in organic, inorganic, and biochemistry. Designed for second-year students, the course serves majors in chemistry, biochemistry, and biology, as well as prehealth-professions students. Building on an earlier course that developed concepts of nucleophiles and…

  7. Hybrid organic-inorganic network coatings for protecting metal substrates from abrasion and corrosion

    SciTech Connect

    Jordens, K.; Wilkes, G.

    1996-12-31

    Ceramers or Ormocers are hybrid organic-inorganic materials first created a decade ago, and are the subject of a recent review article. Recent research from the authors laboratory in this area of materials science has focused on synthesizing protective coatings for (soft) polymeric substrates, i.e. polycarbonate. The authors have now extended the application of such coatings to metallic substrates.

  8. Preparation and characterization of cellulose acetate organic/inorganic hybrid films

    Treesearch

    Saeed S. Shojaie; Timothy G. Rials; Stephen S. Kelley

    1995-01-01

    A series of organic/inorganic hybrid (OIH) films were prepared using cellulose acetate (CA) as the organic component and tetraethyl orthosilicate (TEOS) as the inorganic component. The chemical, morphological, and mechanical properties of these films were evaluated with a variety of analytical techniques. The results of these evaluations showed that crosslinked CA OIH...

  9. Synthesis, structural and optical characterization of APbX{sub 3} (A=methylammonium, dimethylammonium, trimethylammonium; X=I, Br, Cl) hybrid organic-inorganic materials

    SciTech Connect

    Mancini, Alessandro; Quadrelli, Paolo; Amoroso, Giuseppe; Milanese, Chiara; Boiocchi, Massimo; Sironi, Angelo; Patrini, Maddalena; Guizzetti, Giorgio; Malavasi, Lorenzo

    2016-08-15

    In this paper we report the synthesis, the crystal structure and the optical response of APbX{sub 3} (A=MA, DMA, and TMA; X=I, Br) hybrid organic-inorganic materials including some new phases. We observe that as the cation group increases in size, the optical absorption edge shifts to higher energies with energy steps which are systematic and independent on the anion. A linear correlation between the optical bad gap and the tolerance factor has been shown for the series of samples investigated. - Graphical abstract: The crystal structure and the optical response of the two series of hybrid organic-inorganic materials APbX{sub 3} (A=MA, DMA, and TMA; X=I, Br), which include some new phases, are reported. A dependence of crystal structure and band-gap with tolerance factor is shown. Display Omitted - Highlights: • DMAPbI{sub 3}, TMAPbI{sub 3} and TMAPbBr{sub 3} are reported as new hybrid organic-inorganic compounds. • Crystal structure and optical properties as a function of the number of methyl groups are provided. • Correlation between structure and optical properties are given as a function of tolerance factor.

  10. Easily processable multimodal spectral converters based on metal oxide/organic-inorganic hybrid nanocomposites.

    PubMed

    Julián-López, Beatriz; Gonell, Francisco; Lima, Patricia P; Freitas, Vânia T; André, Paulo S; Carlos, Luis D; Ferreira, Rute A S

    2015-10-09

    This manuscript reports the synthesis and characterization of the first organic-inorganic hybrid material exhibiting efficient multimodal spectral converting properties. The nanocomposite, made of Er(3+), Yb(3+) codoped zirconia nanoparticles (NPs) entrapped in a di-ureasil d-U(600) hybrid matrix, is prepared by an easy two-step sol-gel synthesis leading to homogeneous and transparent materials that can be very easily processed as monolith or film. Extensive structural characterization reveals that zirconia nanocrystals of 10-20 nm in size are efficiently dispersed into the hybrid matrix and that the local structure of the di-ureasil is not affected by the presence of the NPs. A significant enhancement in the refractive index of the di-ureasil matrix with the incorporation of the ZrO2 nanocrystals is observed. The optical study demonstrates that luminescent properties of both constituents are perfectly preserved in the final hybrid. Thus, the material displays a white-light photoluminescence from the di-ureasil component upon excitation at UV/visible radiation and also intense green and red emissions from the Er(3+)- and Yb(3+)-doped NPs after NIR excitation. The dynamics of the optical processes were also studied as a function of the lanthanide content and the thickness of the films. Our results indicate that these luminescent hybrids represent a low-cost, environmentally friendly, size-controlled, easily processed and chemically stable alternative material to be used in light harvesting devices such as luminescent solar concentrators, optical fibres and sensors. Furthermore, this synthetic approach can be extended to a wide variety of luminescent NPs entrapped in hybrid matrices, thus leading to multifunctional and versatile materials for efficient tuneable nonlinear optical nanodevices.

  11. Quantum-dot blue light emitting diodes utilizing organic/inorganic hybrid structures

    NASA Astrophysics Data System (ADS)

    Wu, Feifei; Hu, Lian; Zhang, Bingpo; Li, Ruifeng; Wu, Huizhen

    2015-02-01

    We report blue color quantum-dot light-emitting diodes (QDLEDs) using an organic-inorganic hybrid structure and CdZnS-ZnS core-shell quantum-dot emitters. In the device organic ploy(3,4-ethylenedioxythiophene):ploy(styrene sulfonate) (PEDOT:PSS) and NN‧-bis(3-methylphenyl)-NN‧-bis(phenyl)-99-spiro-bifluorene (TPD) thin films are respectively used as the hole-injection layer (HIL) and the hole-transporting layer (HTL), and an inorganic ZnSnO thin film is used as the electron-transporting layer (ETL). In the blue QDLEDs, the function of the TPD-HTL is explored and it is found that the device employing a TPD-HTL exhibits much better optical characteristics compared with that having an identical device layout but without the TPD-HTL. The TPD HTL acts as a transition layer and offers a ladder for the injected holes from PEDOT:PSS to the QDs, leading to an more efficient hole injection. It is further found that the intensity ratio between surface-state emission (SSE) and band-edge emission (BEE) (RS/B) of the two devices shows significant difference at high bias voltages. The SSE becomes more prominent at higher bias voltage in the QDLEDs due to the imbalance injection of holes and electrons. The injected holes firstly encounter the excessive electrons accumulated at the surface of the charged QDs, thus the probability of hole-electron recombination at the QDs surface is greatly enhanced at high bias voltages.

  12. Glass transition measurements in mixed organic and organic/inorganic aerosol particles

    NASA Astrophysics Data System (ADS)

    Dette, Hans Peter; Qi, Mian; Schröder, David; Godt, Adelheid; Koop, Thomas

    2014-05-01

    The recent proposal of a semi-solid or glassy state of secondary organic aerosol (SOA) particles has sparked intense research in that area. In particular, potential effects of a glassy aerosol state such as incomplete gas-to-particle partitioning of semi-volatile organics, inhibited chemical reactions and water uptake, and the potential to act as heterogeneous ice nuclei have been identified so far. Many of these studies use well-studied proxies for oxidized organics such as sugars or other polyols. There are, however, few measurements on compounds that do exist in atmospheric aerosol particles. Here, we have performed studies on the phase state of organics that actually occur in natural SOA particles arising from the oxidation of alpha-pinene emitted in boreal forests. We have investigated the two marker compounds pinonic acid and 3-methylbutane-1,2,3-tricarboxylic acid (3-MBTCA) and their mixtures. 3-MBCTA was synthesized from methyl isobutyrate and dimethyl maleate in two steps. In order to transfer these substances into a glassy state we have developed a novel aerosol spray drying technique. Dilute solutions of the relevant organics are atomized into aerosol particles which are dried subsequently by diffusion drying. The dried aerosol particles are then recollected in an impactor and studied by means of differential scanning calorimetry (DSC), which provides unambiguous information on the aerosols' phase state, i.e. whether the particles are crystalline or glassy. In the latter case DSC is used to determine the glass transition temperature Tg of the investigated samples. Using the above setup we were able to determine Tg of various mixtures of organic aerosol compounds as a function of their dry mass fraction, thus allowing to infer a relation between Tg and the O:C ratio of the aerosols. Moreover, we also studied the glass transition behavior of mixed organic/inorganic aerosol particles, including the effects of liquid-liquid phase separation upon drying.

  13. Synthesis of organic-inorganic hybrid sols with nano silica particles and organoalkoxysilanes for transparent and high-thermal-resistance coating films using sol-gel reaction.

    PubMed

    Na, Moonkyong; Park, Hoyyul; Ahn, Myeongsang; Lee, Hyeonhwa; Chung, Ildoo

    2010-10-01

    Organic-inorganic hybrid sols were synthesized from nano silica particles dispersed in water and from organoalkoxysilanes, using the sol-gel reaction. This work focuses on the effects of the three multifunctional organoalkoxysilanes dimethyldimethoxysilane (DMDMS), methyltrimethoxysilane (MTMS), and tetramethoxysilane (TMOS) to form a transparent and high-thermal-resistance coating film. The stability of the hybrid sol was evaluated as a function of the reaction time for 10 d through the variation of the viscosity. The viscosity of the silica/DMDMS and silica/MTMS sol was slightly increased for 10 d. The multifunctional organoalkoxysilanes formed dense silica networks through hydrolysis and condensation reaction, which enhanced the thermal resistance of the coating films. No thermal degradation of the silica/DMDMS sample occurred up to 600 degrees C, and none of the silica/MTMS and silica/TMOS samples occurred either up to 700 degrees C. The organic-inorganic hybrid sols were coated on the glass substrate using a spin-coating procedure. The organic-inorganic hybrid sols formed flat coating films without cracks. The transmittance of the hybrid sol coating films using MTMS and DMDMS was shown to be over 90%. The transmittance of the silica/TMOS sol coating film reacted for 10 d abruptly decreased due to faster gelation. The silica/DMDMS and silica/MTMS hybrid sols formed smooth coating films while the surface roughness of the silica/TMOS coating film markedly increased when the hybrid sol reacted for 10 d. The increase of the surface roughness of the silica/TMOS coating film can be attributed to the degradation of the stability of the hybrid sol and to the loss of transmittance of the coating film. It was confirmed in this study that the use of organic-inorganic hybrid sol can yield transparent and high-thermal-resistance coating films.

  14. A metal-free organic-inorganic aqueous flow battery

    SciTech Connect

    Huskinson, B; Marshak, MP; Suh, C; Er, S; Gerhardt, MR; Galvin, CJ; Chen, XD; Aspuru-Guzik, A; Gordon, RG; Aziz, MJ

    2014-01-08

    As the fraction of electricity generation from intermittent renewable sources-such as solar or wind-grows, the ability to store large amounts of electrical energy is of increasing importance. Solid-electrode batteries maintain discharge at peak power for far too short a time to fully regulate wind or solar power output(1,2). In contrast, flow batteries can independently scale the power (electrode area) and energy (arbitrarily large storage volume) components of the system by maintaining all of the electro-active species in fluid form(3-5). Wide-scale utilization of flow batteries is, however, limited by the abundance and cost of these materials, particularly those using redox-active metals and precious-metal electrocatalysts(6,7). Here we describe a class of energy storage materials that exploits the favourable chemical and electro-chemical properties of a family of molecules known as quinones. The example we demonstrate is ametal-free flow battery based on the redox chemistry of 9,10-anthraquinone-2,7-disulphonic acid (AQDS). AQDS undergoes extremely rapid and reversible two-electron two-proton reduction on a glassy carbon electrode in sulphuric acid. An aqueous flow battery with inexpensive carbon electrodes, combining the quinone/hydroquinone couple with the Br-2/Br- redox couple, yields a peak galvanic power density exceeding 0.6 W cm(-2) at 1.3 A cm(-2). Cycling of this quinone-bromide flow battery showed >99 per cent storage capacity retention per cycle. The organic anthraquinone species can be synthesized from inexpensive commodity chemicals(8). This organic approach permits tuning of important properties such as the reduction potential and solubility by adding functional groups: for example, we demonstrate that the addition of two hydroxy groups to AQDS increases the open circuit potential of the cell by 11% and we describe a pathway for further increases in cell voltage. The use of p-aromatic redox-active organic molecules instead of redox-active metals

  15. A metal-free organic-inorganic aqueous flow battery.

    PubMed

    Huskinson, Brian; Marshak, Michael P; Suh, Changwon; Er, Süleyman; Gerhardt, Michael R; Galvin, Cooper J; Chen, Xudong; Aspuru-Guzik, Alán; Gordon, Roy G; Aziz, Michael J

    2014-01-09

    As the fraction of electricity generation from intermittent renewable sources--such as solar or wind--grows, the ability to store large amounts of electrical energy is of increasing importance. Solid-electrode batteries maintain discharge at peak power for far too short a time to fully regulate wind or solar power output. In contrast, flow batteries can independently scale the power (electrode area) and energy (arbitrarily large storage volume) components of the system by maintaining all of the electro-active species in fluid form. Wide-scale utilization of flow batteries is, however, limited by the abundance and cost of these materials, particularly those using redox-active metals and precious-metal electrocatalysts. Here we describe a class of energy storage materials that exploits the favourable chemical and electrochemical properties of a family of molecules known as quinones. The example we demonstrate is a metal-free flow battery based on the redox chemistry of 9,10-anthraquinone-2,7-disulphonic acid (AQDS). AQDS undergoes extremely rapid and reversible two-electron two-proton reduction on a glassy carbon electrode in sulphuric acid. An aqueous flow battery with inexpensive carbon electrodes, combining the quinone/hydroquinone couple with the Br2/Br(-) redox couple, yields a peak galvanic power density exceeding 0.6 W cm(-2) at 1.3 A cm(-2). Cycling of this quinone-bromide flow battery showed >99 per cent storage capacity retention per cycle. The organic anthraquinone species can be synthesized from inexpensive commodity chemicals. This organic approach permits tuning of important properties such as the reduction potential and solubility by adding functional groups: for example, we demonstrate that the addition of two hydroxy groups to AQDS increases the open circuit potential of the cell by 11% and we describe a pathway for further increases in cell voltage. The use of π-aromatic redox-active organic molecules instead of redox-active metals

  16. A metal-free organic-inorganic aqueous flow battery

    NASA Astrophysics Data System (ADS)

    Huskinson, Brian; Marshak, Michael P.; Suh, Changwon; Er, Süleyman; Gerhardt, Michael R.; Galvin, Cooper J.; Chen, Xudong; Aspuru-Guzik, Alán; Gordon, Roy G.; Aziz, Michael J.

    2014-01-01

    As the fraction of electricity generation from intermittent renewable sources--such as solar or wind--grows, the ability to store large amounts of electrical energy is of increasing importance. Solid-electrode batteries maintain discharge at peak power for far too short a time to fully regulate wind or solar power output. In contrast, flow batteries can independently scale the power (electrode area) and energy (arbitrarily large storage volume) components of the system by maintaining all of the electro-active species in fluid form. Wide-scale utilization of flow batteries is, however, limited by the abundance and cost of these materials, particularly those using redox-active metals and precious-metal electrocatalysts. Here we describe a class of energy storage materials that exploits the favourable chemical and electrochemical properties of a family of molecules known as quinones. The example we demonstrate is a metal-free flow battery based on the redox chemistry of 9,10-anthraquinone-2,7-disulphonic acid (AQDS). AQDS undergoes extremely rapid and reversible two-electron two-proton reduction on a glassy carbon electrode in sulphuric acid. An aqueous flow battery with inexpensive carbon electrodes, combining the quinone/hydroquinone couple with the Br2/Br- redox couple, yields a peak galvanic power density exceeding 0.6Wcm-2 at 1.3Acm-2. Cycling of this quinone-bromide flow battery showed >99 per cent storage capacity retention per cycle. The organic anthraquinone species can be synthesized from inexpensive commodity chemicals. This organic approach permits tuning of important properties such as the reduction potential and solubility by adding functional groups: for example, we demonstrate that the addition of two hydroxy groups to AQDS increases the open circuit potential of the cell by 11% and we describe a pathway for further increases in cell voltage. The use of π-aromatic redox-active organic molecules instead of redox-active metals represents a new and

  17. Organic/inorganic hybrid filters based on dendritic and cyclodextrin "nanosponges" for the removal of organic pollutants from water.

    PubMed

    Arkas, Michael; Allabashi, Roza; Tsiourvas, Dimitris; Mattausch, Eva-Maria; Perfler, Reinhard

    2006-04-15

    Long-alkyl chain functionalized poly(propylene imine) dendrimer, poly(ethylene imine) hyperbranched polymer, and beta-cyclodextrin derivatives, which are completely insoluble in water, have the property of encapsulating organic pollutants from water. Ceramic porous filters can be impregnated with these compounds resulting in hybrid organic/ inorganic filter modules. These hybrid filter modules were tested for the effective purification of water, by continuous filtration experiments, employing a variety of water pollutants. It has been established that polycyclic aromatic hydrocarbons (PAHs) can be removed very efficiently (more than 95%), and final concentrations of several ppb (microg/ L) are easily obtained. Representatives of the pollutant group of trihalogen methanes (THMs), monoaromatic hydrocarbons (BTX), and pesticides (simazine) can also be removed (>80%), although the filters are saturated considerably faster in these cases.

  18. Band Gap Tuning and Defect Tolerance of Atomically Thin Two-Dimensional Organic-Inorganic Halide Perovskites.

    PubMed

    Pandey, Mohnish; Jacobsen, Karsten W; Thygesen, Kristian S

    2016-11-03

    Organic-inorganic halide perovskites have proven highly successful for photovoltaics but suffer from low stability, which deteriorates their performance over time. Recent experiments have demonstrated that low dimensional phases of the hybrid perovskites may exhibit improved stability. Here we report first-principles calculations for isolated monolayers of the organometallic halide perovskites (C4H9NH3)2MX2Y2, where M = Pb, Ge, Sn and X,Y = Cl, Br, I. The band gaps computed using the GLLB-SC functional are found to be in excellent agreement with experimental photoluminescence data for the already synthesized perovskites. Finally, we study the effect of different defects on the band structure. We find that the most common defects only introduce shallow or no states in the band gap, indicating that these atomically thin 2D perovskites are likely to be defect tolerant.

  19. Morphology and properties of a hybrid organic-inorganic system: Al nanoparticles embedded into CuPc thin film

    SciTech Connect

    Molodtsova, O. V.; Babenkov, S. V.; Aristova, I. M.; Vilkov, O. V.; Aristov, V. Yu.

    2014-04-28

    The evolution of the morphology and the electronic structure of the hybrid organic-inorganic system composed of aluminum nanoparticles (NPs) distributed in an organic semiconductor matrix—copper phthalocyanine (CuPc)—as a function of nominal aluminum content was studied by transmission electron microscopy and by photoemission spectroscopy methods. The aluminum atoms deposited onto the CuPc surface diffuse into the organic matrix and self-assemble to NPs in a well-defined manner with a narrow diameter distribution, which depends on the amount of aluminum that is evaporated onto the CuPc film. We find clear evidence of a charge transfer from Al to CuPc and we have been able to determine the lattice sites where Al ions sit. The finally at high coverage about 64 Å the formation of metallic aluminum overlayer on CuPc thin film takes place.

  20. Silica nanoparticles treated by cold atmospheric-pressure plasmas improve the dielectric performance of organic-inorganic nanocomposites.

    PubMed

    Yan, Wei; Han, Zhao Jun; Phung, B Toan; Ostrikov, Kostya Ken

    2012-05-01

    We report on the application of cold atmospheric-pressure plasmas to modify silica nanoparticles to enhance their compatibility with polymer matrices. Thermally nonequilibrium atmospheric-pressure plasma is generated by a high-voltage radio frequency power source operated in the capacitively coupled mode with helium as the working gas. Compared to the pure polymer and the polymer nanocomposites with untreated SiO(2), the plasma-treated SiO(2)-polymer nanocomposites show higher dielectric breakdown strength and extended endurance under a constant electrical stress. These improvements are attributed to the stronger interactions between the SiO(2) nanoparticles and the surrounding polymer matrix after the plasma treatment. Our method is generic and can be used in the production of high-performance organic-inorganic functional nanocomposites.

  1. Hydrophilic solid-phase extraction of melamine with ampholine-modified hybrid organic-inorganic silica material.

    PubMed

    Wang, Tingting; Zhu, Yiming; Ma, Junfeng; Xuan, Rongrong; Gao, Haoqi; Liang, Zhen; Zhang, Lihua; Zhang, Yukui

    2015-01-01

    In this work, an ampholine-functionalized hybrid organic-inorganic silica sorbent was successfully used to extract melamine from a milk formula sample by a hydrophilic interaction solid-phase extraction protocol. Primary factors affecting the extraction efficiency of the material such as extraction solvent, elution solvent, sample loading volume, and elution volume have been thoroughly optimized. Under the optimized hydrophilic solid-phase extraction conditions, the recoveries of melamine spiked in milk formula samples ranged from 86.2 to 101.8% with relative standard deviations of 4.1-9.4% (n = 3). The limit of detection (S/N = 3) was 0.32 μg/g. The adsorption capacity toward melamine was 30 μg of melamine per grams of sorbent. Due to its simplicity, rapidity and cost effectiveness, the newly developed hydrophilic solid-phase extraction method should provide a promising tool for daily monitoring of doped melamine in milk formula.

  2. Efficient Organic/Inorganic Hybrid Solar Cell Integrating Polymer Nanowires and Inorganic Nanotetrapods.

    PubMed

    Xu, Weizhe; Tan, Furui; Liu, Xiansheng; Zhang, Weifeng; Qu, Shengchun; Wang, Zhijie; Wang, Zhanguo

    2017-12-01

    Constructing a highly efficient bulk-heterojunction is of critical importance to the hybrid organic/inorganic solar cells. Here in this work, we introduce a novel hybrid architecture containing P3HT nanowire and CdSe nanotetrapod as bicontinuous charge channels for holes and electrons, respectively. Compared to the traditionally applied P3HT molecules, the well crystallized P3HT nanowires qualify an enhanced light absorption at the long wavelength as well as strengthened charge carrier transport in the hybrid active layer. Accordingly, based on efficient dissociation of photogenerated excitons, the interpercolation of these two nano-building blocks allows a photovoltaic conversion efficiency of 1.7% in the hybrid solar cell, up to 42% enhancement compared to the reference solar cell with traditional P3HT molecules as electron donor. Our work provides a promising hybrid structure for efficient organic/inorganic bulk-heterojunction solar cells.

  3. Electric-Magneto-Optical Kerr Effect in a Hybrid Organic-Inorganic Perovskite.

    PubMed

    Fan, Feng-Ren; Wu, Hua; Nabok, Dmitrii; Hu, Shunbo; Ren, Wei; Draxl, Claudia; Stroppa, Alessandro

    2017-09-20

    Hybrid organic-inorganic compounds attract a lot of interest for their flexible structures and multifunctional properties. For example, they can have coexisting magnetism and ferroelectricity whose possible coupling gives rise to magnetoelectricity. Here using first-principles computations, we show that, in a perovskite metal-organic framework (MOF), the magnetic and electric orders are further coupled to optical excitations, leading to an Electric tuning of the Magneto-Optical Kerr effect (EMOKE). Moreover, the Kerr angle can be switched by reversal of both ferroelectric and magnetic polarization only. The interplay between the Kerr angle and the organic-inorganic components of MOFs offers surprising unprecedented tools for engineering MOKE in complex compounds. Note that this work may be relevant to acentric magnetic systems in general, e.g., multiferroics.

  4. Fabrication of organic-inorganic perovskite thin films for planar solar cells via pulsed laser deposition

    SciTech Connect

    Liang, Yangang; Zhang, Xiaohang; Gong, Yunhui; Shin, Jongmoon; Wachsman, Eric D.; Takeuchi, Ichiro; Yao, Yangyi; Hsu, Wei-Lun; Dagenais, Mario

    2016-01-15

    We report on fabrication of organic-inorganic perovskite thin films using a hybrid method consisting of pulsed laser deposition (PLD) of lead iodide and spin-coating of methylammonium iodide. Smooth and highly crystalline CH{sub 3}NH{sub 3}PbI{sub 3} thin films have been fabricated on silicon and glass coated substrates with fluorine doped tin oxide using this PLD-based hybrid method. Planar perovskite solar cells with an inverted structure have been successfully fabricated using the perovskite films. Because of its versatility, the PLD-based hybrid fabrication method not only provides an easy and precise control of the thickness of the perovskite thin films, but also offers a straightforward platform for studying the potential feasibility in using other metal halides and organic salts for formation of the organic-inorganic perovskite structure.

  5. Efficient Organic/Inorganic Hybrid Solar Cell Integrating Polymer Nanowires and Inorganic Nanotetrapods

    NASA Astrophysics Data System (ADS)

    Xu, Weizhe; Tan, Furui; Liu, Xiansheng; Zhang, Weifeng; Qu, Shengchun; Wang, Zhijie; Wang, Zhanguo

    2017-01-01

    Constructing a highly efficient bulk-heterojunction is of critical importance to the hybrid organic/inorganic solar cells. Here in this work, we introduce a novel hybrid architecture containing P3HT nanowire and CdSe nanotetrapod as bicontinuous charge channels for holes and electrons, respectively. Compared to the traditionally applied P3HT molecules, the well crystallized P3HT nanowires qualify an enhanced light absorption at the long wavelength as well as strengthened charge carrier transport in the hybrid active layer. Accordingly, based on efficient dissociation of photogenerated excitons, the interpercolation of these two nano-building blocks allows a photovoltaic conversion efficiency of 1.7% in the hybrid solar cell, up to 42% enhancement compared to the reference solar cell with traditional P3HT molecules as electron donor. Our work provides a promising hybrid structure for efficient organic/inorganic bulk-heterojunction solar cells.

  6. Organic-inorganic hybrid gels for the selective absorption of oils from water.

    PubMed

    Ozan Aydin, Gulsah; Bulbul Sonmez, Hayal

    2016-06-01

    Organic-inorganic hybrid gels were synthesized by the condensation of a linear aliphatic diol (1,8-octanediol) and altering the chain length of the alkyltriethoxysilanes (from ethyltriethoxysilane to hexadecyltrimethoxysilane) through a bulk polymerization process without using any initiator, activator, catalyst, or solvent for the selective removal of oils from water. Fourier transform infrared spectroscopy (FTIR) and solid-state (13)C and (29)Si cross-polarization magic-angle spinning nuclear magnetic resonance (CPMAS NMR) were used for the structural analysis of hybrid gels. Thermal properties of the hybrid gels were determined by thermogravimetric analysis (TGA). Oil absorbency of organic-inorganic hybrid gels was determined by oil absorption tests. The results showed that hybrid gels have high and fast absorption capacities and excellent reusability. Good selectivity, high thermal stability, low density, and excellent recyclability for the oil removal give the material potential applications.

  7. A novel organic-inorganic hybrid tandem solar cell with inverted structure

    NASA Astrophysics Data System (ADS)

    Bahrami, A.; Faez, R.

    2017-04-01

    A novel organic-inorganic hybrid tandem solar cell with inverted structure is proposed. This efficient double-junction hybrid tandem solar cell consists of a single-junction hydrogenated amorphous silicon (a-Si:H) subcell with n-i-p structure as front cell and a P3HT:PCBM organic subcell with inverted structure as back cell. In order to optimize the hybrid tandem cell, we have performed a simulation based on transfer matrix method. We have compared the characteristics of this novel structure with a conventional structure. As a result, a power conversion efficiency (PCE) of 6.1 and 24% improvement compared to the conventional hybrid tandem cell was achieved. We also discuss the high potential of this novel structure for realizing high-stability organic-inorganic hybrid photovoltaic devices.

  8. Fabrication of organic-inorganic perovskite thin films for planar solar cells via pulsed laser deposition

    NASA Astrophysics Data System (ADS)

    Liang, Yangang; Yao, Yangyi; Zhang, Xiaohang; Hsu, Wei-Lun; Gong, Yunhui; Shin, Jongmoon; Wachsman, Eric D.; Dagenais, Mario; Takeuchi, Ichiro

    2016-01-01

    We report on fabrication of organic-inorganic perovskite thin films using a hybrid method consisting of pulsed laser deposition (PLD) of lead iodide and spin-coating of methylammonium iodide. Smooth and highly crystalline CH3NH3PbI3 thin films have been fabricated on silicon and glass coated substrates with fluorine doped tin oxide using this PLD-based hybrid method. Planar perovskite solar cells with an inverted structure have been successfully fabricated using the perovskite films. Because of its versatility, the PLD-based hybrid fabrication method not only provides an easy and precise control of the thickness of the perovskite thin films, but also offers a straightforward platform for studying the potential feasibility in using other metal halides and organic salts for formation of the organic-inorganic perovskite structure.

  9. High Open-Circuit Voltage Solar Cells Based on Organic-Inorganic Lead Bromide Perovskite.

    PubMed

    Edri, Eran; Kirmayer, Saar; Cahen, David; Hodes, Gary

    2013-03-21

    Mesoscopic solar cells, based on solution-processed organic-inorganic perovskite absorbers, are a promising avenue for converting solar to electrical energy. We used solution-processed organic-inorganic lead halide perovskite absorbers, in conjunction with organic hole conductors, to form high voltage solar cells. There is a dire need for low-cost cells of this type, to drive electrochemical reactions or as the high photon energy cell in a system with spectral splitting. These perovskite materials, although spin-coated from solution, form highly crystalline materials. Their simple synthesis, along with high chemical versatility, allows tuning their electronic and optical properties. By judicious selection of the perovskite lead halide-based absorber, matching organic hole conductor, and contacts, a cell with a ∼ 1.3 V open circuit voltage was made. While further study is needed, this achievement provides a general guideline for additional improvement of cell performance.

  10. Synthesis and electron microscopy of inorganic and hybrid organic-inorganic mesoporous and macroporous materials

    NASA Astrophysics Data System (ADS)

    Blanford, Christopher Francis

    This work describes the creation and analysis of ordered porous inorganic and organic-inorganic hybrid materials with an emphasis on the qualitative and quantitative characterization by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Two major systems were studied: MCM-41-type mesoporous molecular sieves and three-dimensionally ordered macroporous (3DOM) materials. The microanalysis of mesoporous samples is discussed first. Samples of unmodified siliceous MCM-41, MCM-41 with grafted titanium dioxide species, and MCM-41 with incorporated 3-mercaptopropyl groups were examined in the TEM at three accelerating voltages. The beam stability of all the samples increased with increasing accelerating voltage. The particles were significantly more resistant to beam damage with the surfactant template in place, when the samples were synthesized above room temperature, and when the silicate precursor was hydrolyzed in acid. The samples with organic and inorganic groups were more stable than siliceous analogs. The discussion of 3DOM materials begins with their synthesis and characterization: 3DOM materials were created from colloidal crystals of uniform, sub-micrometer diameter polystyrene and poly(methyl methacrylate) spheres. Metal alkoxides, solutions of metal salts, and mixed salt-alkoxide precursors were employed to create 3DOM metal oxides, silicates with incorporated organic groups and polyoxometalate clusters, metals, and metal alloys. SEM and TEM were used extensively to characterize the morphology, crystallinity, grain size, and phase of the 3DOM products. The formation of 3DOM nickel oxide was studied by heating a nickel oxalate-colloidal crystal composite in an environmental SEM. The growth of the grains in 3DOM cobalt metal and 3DOM iron oxide were observed by high-temperature TEM. The arrangement of the pores in 3DOM materials was studied by analyzing diffractograms of TEM images of single particles tilted into different orientations

  11. Understanding the Slow Transient Optoelectronic Response of Hybrid Organic-Inorganic Halide Perovskites

    NASA Astrophysics Data System (ADS)

    Jacobs, Daniel Louis

    Hybrid organic-inorganic halide perovskites, particularly methylammonium lead triiodide (MAPbI3), have emerged within the past decade as an exciting class of photovoltaic materials. In less than ten years, MAPbI3-based photovoltaic devices have seen unprecedented performance growth, with photoconversion efficiency increasing from 3% to over 22%, making it competitive with traditional high-efficiency solar cells. Furthermore, the fabrication of MAPbI3 devices utilize low-temperature solution processing, which could facilitate ultra low cost manufacturing. However, MAPbI3 suffers from significant instabilities under working conditions that have limited their applications outside of the laboratory. The instability of the MAPbI3 material can be generalized as a complex, slow transient optoelectronic response (STOR). The mechanism of the generalized STOR is dependent on the native defects of MAPbI3, but detailed understanding of the material defect properties is complicated by the complex ionic bonding of MAPbI3. Furthermore, characterization of the intrinsic material's response is complicated by the diverse approach to material processing and device architecture across laboratories around the world. In order to understand and mitigate the significant problems of MAPbI3 devices, a new approach focused on the material response, rather than the full device response, must be pursued. This dissertation highlights the work to analyze and mitigate the STOR intrinsic to MAPbI3. An experimental platform was developed based on lateral interdigitated electrode (IDE) arrays capable of monitoring the current and photoluminescence response simultaneously. By correlating the dynamics of the current and photoluminescence (PL) responses, both charge trapping and ion migration mechanisms were identified to contribute to the STOR. Next, a novel fabrication technique is introduced that is capable of reliably depositing MAPbI3 thin films with grain sizes at least an order of magnitude

  12. A First-Principles Study on the Structural and Electronic Properties of Sn-Based Organic-Inorganic Halide Perovskites

    NASA Astrophysics Data System (ADS)

    Ma, Zi-Qian; Pan, Hui; Wong, Pak Kin

    2016-11-01

    Organic-inorganic halide perovskites have attracted increasing interest on solar-energy harvesting because of their outstanding electronic properties. In this work, we systematically investigate the structural and electronic properties of Sn-based hybrid perovskites MASnX3 and FASnX3 (X = I, Br) based on density-functional-theory calculations. We find that their electronic properties strongly depend on the organic molecules, halide atoms, and structures. We show that there is a general rule to predict the band gap of the Sn-based hybrid perovskite: its band gap increases as the size of halide atom decreases as well as that of organic molecule increase. The band gap of high temperature phase (cubic structure) is smaller than that of low temperature phase (orthorhombic structure). The band gap of tetragonal structure (medium-temperature phase) may be larger or smaller than that of cubic phase, depending on the orientation of the molecule. Tunable band gap within a range of 0.73-1.53 eV can be achieved by choosing halide atom and organic molecule, and controlling structure. We further show that carrier effective mass also reduces as the size of halide atom increases and that of molecule decreases. By comparing with Pb-based hybrid perovskites, the Sn-based systems show enhanced visible-light absorption and carrier mobility due to narrowed band gap and reduced carrier effective mass. These Sn-based organic-inorganic halide perovskites may find applications in solar energy harvesting with improved performance.

  13. Solution-Processed Organic-Inorganic Perovskite Field-Effect Transistors with High Hole Mobilities.

    PubMed

    Matsushima, Toshinori; Hwang, Sunbin; Sandanayaka, Atula S D; Qin, Chuanjiang; Terakawa, Shinobu; Fujihara, Takashi; Yahiro, Masayuki; Adachi, Chihaya

    2016-12-01

    A very high hole mobility of 15 cm(2) V(-1) s(-1) along with negligible hysteresis are demonstrated in transistors with an organic-inorganic perovskite semiconductor. This high mobility results from the well-developed perovskite crystallites, improved conversion to perovskite, reduced hole trap density, and improved hole injection by employing a top-contact/top-gate structure with surface treatment and MoOx hole-injection layers.

  14. Multisite organic-inorganic hybrid catalysts for the direct sustainable synthesis of GABAergic drugs.

    PubMed

    Leyva-Pérez, Antonio; García-García, Pilar; Corma, Avelino

    2014-08-11

    Multisite organic-inorganic hybrid catalysts have been prepared and applied in a new general, practical, and sustainable synthetic procedure toward industrially relevant GABA derivatives. The domino sequence is composed of seven chemical transformations which are performed in two one-pot reactions. The method produces both enantiomeric forms of the product in high enantiopurity as well as the racemate in good yields after a single column purification step. This protocol highlights major process intensification, catalyst recyclability, and low waste generation.

  15. Synthesis of hybrid organic-inorganic near-IR responsive magnetic nanoparticles for cancer theragnosis

    NASA Astrophysics Data System (ADS)

    Bang, Doyeon; Lee, Taeksu; Choi, Jihye; Park, Joseph; Kang, Byunghoon; Huh, Yong-Min; Haam, Seungjoo

    2012-10-01

    Hybrid organic-inorganic near-infrared responsive magnetic nanoparticles were synthesized for theragnosis combined with localized therapy. In detail, inorganic super-paramagnetic nanoparticles were embedded inside organic polyaniline matrix, which enables localized photothermal therapy upon NIR illumination under intracellular acidic/oxidative condition. In this structure, super-paramagnetic nanoparticle works as MRI contrast agent, that enables the visualization of a tumor and polyaniline works for near-infrared responsive tumor ablation.

  16. Organic-inorganic nanostructures for luminescent indication in the near-infrared range

    NASA Astrophysics Data System (ADS)

    Kondratenko, T. S.; Ovchinnikov, O. V.; Grevtseva, I. G.; Smirnov, M. S.

    2016-04-01

    Amplifying and quenching of IR luminescence of colloidal Ag2S quantum dots were revealed to take place when they couple to organic dye molecules of 3,3'-di-(γ-sulfopropyl)-9-ethyl-4,5,4',5'-dibenzothiacarbocyanine betaine and erytrosine pyridinium salts, respectively. The observed effects are explained as due to the formation of organic-inorganic heterostructures with different mutual arrangement of electronic states of the dyes and the quantum dots.

  17. Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in hybrid organic-inorganic film of chitosan/sol-gel/carbon nanotubes

    SciTech Connect

    Kang, Xinhuang; Wang, Jun; Tang, Zhiwen; Wu, Hong; Lin, Yuehe

    2009-04-15

    A hybrid organic-inorganic nanocomposite film of chitosan/sol-gel/multi-walled carbon nanotubes was constructed for the immobilization of horseradish peroxidase (HRP). This film was characterized by scanning electron microscopy. Direct electron transfer (DET) and bioelectrocatalysis of HRP incorporated into the composite film were investigated. The results indicate that the film can provide a favorable microenvironment for HRP to perform DET on the surface of glassy carbon electrodes with a pair of quasi-reversible redox waves and to retain its bioelectrocatalytic activity toward hydrogen peroxide.

  18. Progress of Multi Functional Properties of Organic-Inorganic Hybrid System, A[FeIIFeIIIX3] (A = (n-CnH2n+1)4N, Spiropyran; X = C2O2S2, C2OS3, C2O3S)

    PubMed Central

    Kojima, Norimichi; Enomoto, Masaya; Kida, Noriyuki; Kagesawa, Koichi

    2010-01-01

    In the case of mixed-valence systems whose spin states are situated in the spin crossover region, new types of conjugated phenomena coupled with spin and charge are expected. From this viewpoint, we have investigated the multifunctional properties coupled with spin, charge and photon for the organic-inorganic hybrid system, A[FeIIFeIIIX3](A = (n-CnH2n+1)4N, spiropyran; X = dto(C2O2S2), tto(C2OS3), mto(C2O3S)). A[FeIIFeIII(dto)3] and A[FeIIFeIII(tto)3] undergo the ferromagnetic phase transitions, while A[FeIIFeIII(mto)3] undergoes a ferrimagnetic transition. In (n-CnH2n+1)4N [FeIIFeIII(dto)3](n = 3,4), a new type of phase transition called charge transfer phase transition (CTPT) takes place around 120 K, where the thermally induced charge transfer between FeII and FeIII occurs reversibly. At the CTPT, the iron valence state dynamically fluctuated with a frequency of about 0.1 MHz, which was confirmed by means of muon spin relaxation. The charge transfer phase transition and the ferromagnetic transition for (n-CnH2n+1)4N[FeIIFeIII(dto)3] remarkably depend on the size of intercalated cation. In the case of (SP)[FeIIFeIII(dto)3](SP = spiropyran), the photoinduced isomerization of SP under UV irradiation induces the charge transfer phase transition in the [FeIIFeIII(dto)3] layer and the remarkable change of the ferromagnetic transition temperature. In the case of (n-CnH2n+1)4N[FeIIFeIII(mto)3](mto = C2O3S), a rapid spin equilibrium between the high-spin state (S = 5/2) and the low-spin state (S = 1/2) at the FeIIIO3S3 site takes place in a wide temperature range, which induces the valence fluctuation of the FeS3O3 and FeO6 sites through the ferromagnetic coupling between the low spin state (S = 1/2) of the FeIIIS3O3 site and the high spin state (S = 2) of the FeIIO6 site.

  19. [Effects of organic-inorganic mixed fertilizers on rice yield and nitrogen use efficiency].

    PubMed

    Zhang, Xiao-li; Meng, Lin; Wang, Qiu-jun; Luo, Jia; Huang, Qi-wei; Xu, Yang-chun; Yang, Xing-ming; Shen, Qi-rong

    2009-03-01

    A field experiment was carried to study the effects of organic-inorganic mixed fertilizers on rice yield, nitrogen (N) use efficiency, soil N supply, and soil microbial diversity. Rapeseed cake compost (RCC), pig manure compost (PMC), and Chinese medicine residue compost (MRC) were mixed with chemical N, P and K fertilizers. All the treatments except CK received the same rate of N. The results showed that all N fertilizer application treatments had higher rice yield (7918.8-9449.2 kg x hm(-2)) than the control (6947.9 kg x hm(-2)). Compared with that of chemical fertilizers (CF) treatment (7918.8 kg x hm(-2)), the yield of the three organic-inorganic mixed fertilizers treatments ranged in 8532.0-9449.2 kg x hm(-2), and the increment was 7.7%-19.3%. Compared with treatment CF, the treatments of organic-inorganic mixed fertilizers were significantly higher in N accumulation, N transportation efficiency, N recovery rate, agronomic N use efficiency, and physiological N use efficiency. These mixed fertilizers treatments promoted rice N uptake and improved soil N supply, and thus, increased N use efficiency, compared with treatments CF and CK. Neighbor joining analysis indicated that soil bacterial communities in the five treatments could be classified into three categories, i.e., CF and CK, PMC and MRC, and RCC, implying that the application of exogenous organic materials could affect soil bacterial communities, while applying chemical fertilizers had little effect on them.

  20. 45S5 Bioglass®-derived scaffolds coated with organic-inorganic hybrids containing graphene.

    PubMed

    Fabbri, Paola; Valentini, Luca; Hum, Jasmin; Detsch, Rainer; Boccaccini, Aldo R

    2013-10-01

    Highly porous 45S5 Bioglass®-based scaffolds fabricated by a foam replication technique were coated with electrically conductive organic-inorganic hybrid layers containing graphene by a solution method. α,ω-Triethoxysilane terminated poly (ethylene glycol) and tetraethoxysilane were used as the precursors of the organic-inorganic hybrid coatings, that contained 1.5 wt.% of homogeneously dispersed graphene nanoplatelets. The resulting coated scaffolds retained their original high porosity and interconnected pore structure after coating. The presence of graphene did not impair the bioactivity of the scaffolds in simulated body fluid. Initial tests carried out using MG-63 cells demonstrated that both uncoated scaffolds and scaffolds coated with organic/inorganic hybrids containing graphene offered the cultured cells an adequate surface for cell attachment, spreading and expression of extracellular matrix. The results showed that scaffolds coated with graphene are biocompatible and they can support cellular activity. The electrical conductivity introduced by the coating might have the potential to increase tissue growth when cell culture is carried out under an applied electric field.

  1. Synthesis and properties control of fluorinated organic-inorganic hybrid films

    NASA Astrophysics Data System (ADS)

    Yu, Qingjie; Xu, Jianming; Han, Yuanyuan

    2011-12-01

    Fluorinated organic-inorganic hybrid films were prepared by free-radical random copolymerization and sol-gel process through dodecafluoroheptyl methacrylate (DFMA), vinyltriethoxysilane (VTES), and tetramethoxysilane (TMOS). It was found that the prepared fluorinated organic-inorganic hybrid film was very hydrophobic and exhibits excellent water repellency. Hydrophobic fluorocarbon side chains were preferentially enriched to the outermost layer at the interface of coating film-air, and three layers probably exist in the coating films. The fluorinated hybrid films possessed fluorocarbon side chains orient toward the air originating from DFMA as the top layer, hydrocarbon backbone chain originating from vinyl polymerization as the middle layer, and silica network originating from the hydrolysis and condensation of siloxane as the bottom layer. It demonstrated that most of TMOS added might be arranged to the bottom layer of the fluorinated hybrid films, and had a slight impact on the enrichment of fluorocarbon side chains of the outermost layer. However, the useful properties of the fluorinated organic-inorganic hybrid films such as thickness and corrosion resistant can be significantly improved by the increase of TMOS content.

  2. Wood-Based Nanocomposite Derived by in Situ Formation of Organic-Inorganic Hybrid Polymer within Wood via a Sol-Gel Method.

    PubMed

    Dong, Xiaoying; Zhuo, Xiao; Wei, Jie; Zhang, Gang; Li, Yongfeng

    2017-03-15

    Solid wood materials and wood-plastic composites as two kinds of lightweight materials are attracting great interest from academia and industry due to their green and recycling nature. However, the relatively lower specific strength limits their wider applications. In particular, solid wood is vulnerable to moisture and decay fungi in nature, resulting in its poor durability for effectively long-term utilization. Inspired from the porous structure of wood, we propose a new design to build a wood-based nanocomposite with higher specific strength and satisfactory durability by in situ generation of organic-inorganic hybrid polymer within wood via a sol-gel method. The derived composite has 50-1200% improvement of impact toughness, 56-192% improvement of tensile strength, and 110-291% improvement of flexural strength over those of typical wood-plastic composites, respectively; and even 34% improvement of specific tensile strength than that of 36A steel; 208% enhancement of hardness; and 156% enhancement of compression strength than those of compared solid wood, respectively; as well as significantly improved dimensional stability and decay resistance over those of untreated natural wood. Such materials could be potentially utilized as lightweight and high-strength materials for applications in construction and automotive industries. This method could be extended to constitute other inorganic nanomaterials for novel organic-inorganic hybrid polymer within wood.

  3. Excited state and charge dynamics of hybrid organic/inorganic heterojunctions. II. Experiment

    NASA Astrophysics Data System (ADS)

    Panda, Anurag; Renshaw, C. Kyle; Oskooi, Ardavan; Lee, Kyusang; Forrest, Stephen R.

    2014-07-01

    In our companion paper (Paper I) [C. K. Renshaw and S. R. Forrest, Phys. Rev. B 90, 045302 (2014), 10.1103/PhysRevB.90.045302], we developed a model for charge transport and photogeneration at hybrid organic/inorganic semiconductor heterojunctions (OI-HJs). Here we apply the model to two planar bilayer hybrid photovoltaic devices: the first using the wide-band gap n-TiO2 in combination with the hole transporting tetraphenyl-dibenzoperiflanthene (DBP), and the second based on the moderate-band gap n-InP and the hole transporting pentacene (PEN). We measure the external quantum efficiency (EQE) and current density vs voltage (J-V) characteristics of both devices as functions of temperature. The EQE spectra for both TiO2/DBP and InP/PEN provide convincing evidence that Frenkel states generated in the organic form hybrid charge transfer excitons (HCTEs) at the OI-HJ that are subsequently dissociated into free charges, and then collected at the opposing electrodes. The dissociation efficiency is found to be strongly influenced by the presence of surface states, particularly in the InP/PEN device. We further develop the J-V model from Paper I to include an analytical expression for space-charge effects in the organic at high currents. Model fits to the J-V data suggest that the temperature-dependent hole mobilities in both DBP and PEN result in increasing space-charge effects at low temperatures. Furthermore, we find that the J-V characteristics of the TiO2/DBP device both in the dark and under illumination are governed by interface recombination. In contrast, the dark current in the InP/PEN device is governed by injection over the OI-HJ barrier, whereas the photocurrent is dominated by interface recombination. This work elucidates the role of the HCTE state in photogeneration, and the applicability of our model to a range of important optoelectronic devices.

  4. Broad-Band-Emissive Organic-Inorganic Hybrid Semiconducting Nanowires Based on an ABX3-Type Chain Compound.

    PubMed

    Wu, Zhenyue; Li, Lina; Ji, Chengmin; Lin, Guoming; Wang, Sasa; Shen, Yaoguo; Sun, Zhihua; Zhao, Sangen; Luo, Junhua

    2017-08-07

    Organic-inorganic hybrid lead halide (e.g., CH3NH3PbX3, where X = CI, Br, and I) nanowires (NWs) with remarkable electric and optical properties have recently garnered increasing attention, owing to their structural flexibility and tunability compared to inorganic semiconducting NWs. While most recently reported NWs are limited to methylammonium/formamidinium three-dimensional lead halide perovskites, it is urgent to develop new organic-inorganic hybrid semiconducting NWs. Here, broad-band-emissive single-crystal semiconductive NWs based on a new ABX3-type organic-inorganic chain hybrid, (2-methylpiperidine)lead tribromide, are reported. It is believed that this work will enrich the organic-inorganic hybrid semiconducting NWs and may provide potential applications for LED displaying.

  5. Synthesis of an imprinted hybrid organic-inorganic polymeric sol-gel matrix toward the specific binding and isotherm kinetics investigation of creatinine.

    PubMed

    Chang, Yong-Sheun; Ko, Ting-Hsien; Hsu, Ting-Jung; Syu, Mei-Jywan

    2009-03-15

    Hybrid organic-inorganic polymeric sol-gel materials imprinted with creatinine template molecules were synthesized for the specific binding of creatinine. Creatinine is a metabolite from creatine and is the final product from kidney metabolism. Therefore, creatinine can be an important index to estimate the function of the kidney. It was then chosen as the target molecule in this work. To achieve the specific binding toward creatinine, molecular imprinting was used to create a polymeric matrix for the regarding purpose. Sol-gel was further added to create a rigid network structure for the absorption of creatinine. An inorganic precursor, tetraethoxysilane (TEOS), was mixed with an organic functional monomer, 2-acrylamido-2-methylpropane-sulfonic acid (AMPS), and the creatinine template to form a hybrid organic-inorganic imprinted polymer. The chemical functionality was achieved as well as a confined matrix via the polymerization and the hydrolysis-condensation of the sol-gel. The imprinting effect from the hybrid materials against the corresponding nonimprinted was investigated. BET (Brunauer-Emmett-Teller) analysis was carried out for the imprinted and the nonimprinted materials. The specificity of the hybrid materials was further examined by capping the surface silanol groups with chloro-trimethylsilane (CTMS) and 1,1,1,3,3,3-hexamethyldisilazane (HMDS), respectively. The capping effect was compared and discussed from the binding results. Selectivity of the materials toward creatinine was obtained using mixture solutions in the presence of creatinine and its analogues. Reutilization and storage stability of the hybrid organic-inorganic imprinted material were also studied. Additionally, the affinity distribution of the hybrid imprinted materials derived from the allosteric model was also analyzed from the adsorption isotherm data.

  6. Facile fabrication of organic/inorganic nanotube heterojunction arrays for enhanced photoelectrochemical water splitting

    NASA Astrophysics Data System (ADS)

    Chen, Yingzhi; Li, Aoxiang; Yue, Xiaoqi; Wang, Lu-Ning; Huang, Zheng-Hong; Kang, Feiyu; Volinsky, Alex A.

    2016-07-01

    Organic/inorganic heterojunction photoanodes are appealing for making concurrent use of the highly photoactive organic semiconductors, and the efficient dielectric screening provided by their inorganic counterparts. In the present work, organic/inorganic nanotube heterojunction arrays composed of TiO2 nanotube arrays and a semiconducting N,N-(dicyclohexyl) perylene-3,4,9,10-tetracarboxylic diimide (PDi) layer were fabricated for photoelectrochemical water splitting. In this arrayed architecture, a PDi layer with a tunable thickness was coated on anodic TiO2 nanotube arrays by physical vapor deposition, which is advantageous for the formation of a uniform layer and an adequate interface contact between PDi and TiO2. The obtained PDi/TiO2 junction exhibited broadened visible light absorption, and an effective interface for enhanced photogenerated electron-hole separation, which is supported by the reduced charge transfer resistance and prolonged excitation lifetime via impedance spectroscopy analysis and fluorescence emission decay investigations. Consequently, such a heterojunction photoanode was photoresponsive to a wide visible light region of 400-600 nm, and thus demonstrated a highly enhanced photocurrent density at 1.23 V vs. a reversible hydrogen electrode. Additionally, the durability of such a photoanode can be guaranteed after long-time illumination because of the geometrical restraint imposed by the PDi aggregates. These results pave the way to discover new organic/inorganic assemblies for high-performance photoelectric applications and device integration.Organic/inorganic heterojunction photoanodes are appealing for making concurrent use of the highly photoactive organic semiconductors, and the efficient dielectric screening provided by their inorganic counterparts. In the present work, organic/inorganic nanotube heterojunction arrays composed of TiO2 nanotube arrays and a semiconducting N,N-(dicyclohexyl) perylene-3,4,9,10-tetracarboxylic diimide (PDi

  7. Evidences of plasmonic effect in an organic-inorganic hybrid photovoltaic device using flower-like ZnO@Au nanoparticles

    NASA Astrophysics Data System (ADS)

    Pan, Tong-Sheng; Sharma, Jadab; Chu, Chih-Chien; Tai, Yian

    2014-10-01

    Using flower-like ZnO@Au nanoparticles as external additives in an organic-inorganic hybrid solar cell device, we investigate the surface plasmon resonance (SPR) effect of gold nanoparticles. The active layer of the device consists of a usual polymeric blend of poly(3-hexylthiophene) and surface functionalized ZnO nanorods, which is conventionally known for its poor power conversion efficiency. We present the experimental evidences of improvement over UV-visible absorption properties and photocurrent generation due to the SPR effect. As a result, improvement is reported for short circuit current density and efficiency of the device on addition of flower-like ZnO@Au nanostructures.

  8. Quantum confinement of zero-dimensional hybrid organic-inorganic polaritons at room temperature

    SciTech Connect

    Nguyen, H. S.; Lafosse, X.; Amo, A.; Bouchoule, S.; Bloch, J.; Abdel-Baki, K.; Lauret, J.-S.; Deleporte, E.

    2014-02-24

    We report on the quantum confinement of zero-dimensional polaritons in perovskite-based microcavity at room temperature. Photoluminescence of discrete polaritonic states is observed for polaritons localized in symmetric sphere-like defects which are spontaneously nucleated on the top dielectric Bragg mirror. The linewidth of these confined states is found much sharper (almost one order of magnitude) than that of photonic modes in the perovskite planar microcavity. Our results show the possibility to study organic-inorganic cavity polaritons in confined microstructure and suggest a fabrication method to realize integrated polaritonic devices operating at room temperature.

  9. Tightly bound indirect exciton in single-layer hybrid organic-inorganic perovskite semiconductor

    NASA Astrophysics Data System (ADS)

    Li, Jing; Liu, Tao; Liew, Timothy C. H.

    2017-10-01

    We theoretically study the direct and indirect excitons (IXs) in a single-layer hybrid organic-inorganic perovskite (HOIP) semiconductor. Due to the 2D nature, the single-layer HOIP supports the large binding energy of IXs and direct excitons over a wide range of applied electric fields, which exceed the thermal energy of room temperature. Moreover, the ground-state IX has a lower energy than that of direct exciton, which will extend the coherence and relaxation time of IXs. This is beneficial to optoelectronic applications and excitonic information processing devices of IXs.

  10. The field-dependent interface recombination velocity for organic-inorganic heterojunction

    NASA Astrophysics Data System (ADS)

    Szmytkowski, Jędrzej

    2016-10-01

    We have derived an analytical formula which describes the field-dependent interface recombination velocity for the boundary of two materials characterized by different permittivities. The interface recombination of charge carriers has been considered in the presence of image force Schottky barrier. We suggest that this effect may play an important role in the loss of current for organic-inorganic hybrid heterojunctions. It has been proved that the presented method is a generalization of the Scott-Malliaras model of surface recombination at the organic/metal interface. We also discuss that this model is intuitively similar but not analogous to the Langevin mechanism of bulk recombination.

  11. Study of organic-inorganic hetero-interfaces and electrical transport in semiconducting nanostructures

    NASA Astrophysics Data System (ADS)

    Wagner, Sean Robert

    centered around thermally evaporated ZnPc. These molecules display a highly-ordered, close-packed, tilted configuration which differs from any known bulk packing motif. The ZnPc molecules are able to diffuse rapidly on the Si surface and preferentially nucleate at Si step-edges. This is followed by the formation of highly-ordered anisotropic stripe structures which grow across the Si terraces, i.e. anisotropic step-flow growth. The step-flow growth mode further impacts the growth by reducing the allowed symmetry of the molecular domains such that thin films with an exclusive in-plane molecular ordering are formed. Additionally, the ZnPc tilted packing motif stabilizes the molecular film, allowing it to maintain this packing for multilayered films, despite the decreasing substrate influence. The strength of the MPc-substrate interaction can be modified by changing the central transition-metal ion within the molecule. Through selective p-d orbital coupling between MPc molecules and the substrate, the degree of orbital coupling can induce modifications in the molecular ordering and orientation of MPc molecules at the interface. The secondary focus of this study is to initiate preliminary experimentation towards understanding how ordered organic molecular thin films can be applied to silicon-based devices that could have a significant impact on the electronics market. Si nanomembrane is a flexible, low-dimensional nanomaterial with electronic properties that are highly sensitive to the interface condition. By merging the knowledge of MPc thin film growth on Si with Si nanomembrane technology, possibilities towards modifying the transport properties of nanomaterials through engineering the organic-inorganic hetero-interface can be explored.

  12. Visible/near-IR-light-driven TNFePc/BiOCl organic-inorganic heterostructures with enhanced photocatalytic activity.

    PubMed

    Li, Lu; Zhang, Mingyi; Zhao, Zhenyu; Sun, Baodong; Zhang, Xitian

    2016-06-21

    Although semiconductor photocatalysis has been reported for more than 40 years, the spectral response is still focused on the region of UV-Visible and it is seldom extended to more than 600 nm. In this work, visible/near-IR-light-driven 2,9,16,23-tetranitrophthalocyanine iron (FeTNPc)/bismuth oxychloride (BiOCl) organic-inorganic heterostructures have been synthesized by a two-step solvothermal method. The obtained products were characterized by X-ray diffraction, Fourier transform infrared spectra, scanning electron and transmission microscopy, energy dispersive X-ray spectrometer, UV-vis diffuse reflectance spectroscopy, nitrogen adsorption-desorption, and electrochemical measurements. The photocatalytic activity for the decomposition of methyl orange and bisphenol A solution can be significantly improved under visible/near-IR-light irradiation. Through detecting the main oxidative species by trapping experiments, the results show holes and ˙O2(-) radicals are majorly and minorly responsible for photodegradation respectively. What's more, the FeTNPc/BiOCl composite photocatalyst still retained the photocatalytic activity after three cycle measurements.

  13. Desmosome structure, composition and function.

    PubMed

    Garrod, David; Chidgey, Martyn

    2008-03-01

    Desmosomes are intercellular junctions of epithelia and cardiac muscle. They resist mechanical stress because they adopt a strongly adhesive state in which they are said to be hyper-adhesive and which distinguishes them from other intercellular junctions; desmosomes are specialised for strong adhesion and their failure can result in diseases of the skin and heart. They are also dynamic structures whose adhesiveness can switch between high and low affinity adhesive states during processes such as embryonic development and wound healing, the switching being signalled by protein kinase C. Desmosomes may also act as signalling centres, regulating the availability of signalling molecules and thereby participating in fundamental processes such as cell proliferation, differentiation and morphogenesis. Here we consider the structure, composition and function of desmosomes, and their role in embryonic development and disease.

  14. Dialkylenecarbonate-Bridged Polysilsesquioxanes. Hybrid Organic-Inorganic Sol-Gels with a Thermally Labile Bridging Group

    SciTech Connect

    Assink, Roger A.; Baugher, Brigitta M.; Beach, James V.; Loy, Douglas A.; Shea, Kenneth J.; Small, James H.; Tran, Joseph

    1999-07-20

    In this paper, we introduce a new approach for altering the properties of bridged polysilsesquioxane xerogels using post-processing mobilization of the polymeric network. The bridging organic group contains latent functionalities that can be liberated thermally, photochemically, or by chemical means after the gel has been processed to a xerogel. These modifications can produce changes in density, volubility, porosity, and or chemical properties of the material. Since every monomer possesses two latent functional groups, the technique allows for the introduction of high levels of functionality in hybrid organic-inorganic materials. Dialkylenecarbonate-bridged polysilsesquioxane gels were prepared by the sol-gel polymerization of bis(triethoxysilylpropyl)carbonate (1) and bis(triethoxysilylisobutyl)-carbonate (2). Thermal treatment of the resulting non-porous xerogels and aerogels at 300-350 C resulted in quantitative decarboxylation of the dialkylenecarbonate bridging groups to give new hydroxyalkyl and olefinic substituted polysilsesquioxane monolithic xerogels and aerogels that can not be directly prepared through direct sol-gel polymerization of organotrialkoxysilanes.

  15. Polymeric media comprising polybenzimidazoles N-substituted with organic-inorganic hybrid moiety

    DOEpatents

    Klaehn, John R [Idaho Falls, ID; Peterson, Eric S [Idaho Falls, ID; Wertsching, Alan K [Idaho Falls, ID; Orme, Christopher J [Shelley, ID; Luther, Thomas A [Idaho Falls, ID; Jones, Michael G [Pocatello, ID

    2009-12-15

    A PBI compound includes imidazole nitrogens at least a portion of which are substituted with an organic-inorganic hybrid moiety may be included in a separator medium. At least 85% of the imidazole nitrogens may be substituted. The organic-inorganic hybrid moiety may be an organosilane moiety, for example, (R)Me.sub.2SiCH.sub.2-- where R is selected from among methyl, phenyl, vinyl, and allyl. The separatory medium may exhibit an H.sub.2, Ar, N.sub.2, O.sub.2, CH.sub.3, or CO.sub.2 gas permeability greater than the gas permeability of a comparable separatory medium comprising the PBI compound without substitution. The separatory medium may further include an electronically conductive medium and/or ionically conductive medium. The separatory medium may be used as a membrane (semi-permeable, permeable, and non-permeable), a barrier, an ion exhcange media, a filter, a gas chromatography coating (such as stationary phase coating in affinity chromatography), etc.

  16. Exciton Binding Energy in Organic-Inorganic Tri-Halide Perovskites.

    PubMed

    Askar, Abdelrahman M; Shankar, Karthik

    2016-06-01

    The recent dramatic increase in the power conversion efficiencies of organic-inorganic tri-halide perovskite solar cells has triggered intense research worldwide and created a paradigm shift in the photovoltaics field. It is crucial to develop a solid understanding of the photophysical processes underlying solar cell operation in order to both further improve the photovoltaic performance of perovskite solar cells as well as to exploit the broader optoelectronic applications of the tri-halide perovskites. In this short review, we summarize the main research findings about the binding energy of excitons in tri-halide perovskite materials and find that a value in the range of 2-22 meV at room temperature would be a safe estimate. Spontaneous free carrier generation is the dominant process taking place directly after photoexcitation in organic-inorganic tri-halide perovskites at room temperature, which eliminates the exciton diffusion bottleneck present in organic solar cells and constitutes a major contributing factor to the high photovoltaic performance of this material.

  17. Modeling the surface tension of complex, reactive organic-inorganic mixtures

    NASA Astrophysics Data System (ADS)

    Schwier, A. N.; Viglione, G. A.; Li, Z.; McNeill, V. F.

    2013-01-01

    Atmospheric aerosols can contain thousands of organic compounds which impact aerosol surface tension, affecting aerosol properties such as cloud condensation nuclei (CCN) ability. We present new experimental data for the surface tension of complex, reactive organic-inorganic aqueous mixtures mimicking tropospheric aerosols. Each solution contained 2-6 organic compounds, including methylglyoxal, glyoxal, formaldehyde, acetaldehyde, oxalic acid, succinic acid, leucine, alanine, glycine, and serine, with and without ammonium sulfate. We test two surface tension models and find that most reactive, complex, aqueous organic mixtures which do not contain salt are well-described by a weighted Szyszkowski-Langmuir (S-L) model which was first presented by Henning et al. (2005). Two approaches for modeling the effects of salt were tested: (1) the Tuckermann approach (an extension of the Henning model with an additional explicit salt term), and (2) a new implicit method proposed here which employs experimental surface tension data obtained for each organic species in the presence of salt used with the Henning model. We recommend the use of method (2) for surface tension modeling because the Henning model (using data obtained from organic-inorganic systems) and Tuckermann approach provide similar modeling fits and goodness of fit (χ2) values, yet the Henning model is a simpler and more physical approach to modeling the effects of salt, requiring less empirically determined parameters.

  18. Modeling the surface tension of complex, reactive organic-inorganic mixtures

    NASA Astrophysics Data System (ADS)

    Schwier, A. N.; Viglione, G. A.; Li, Z.; McNeill, V. Faye

    2013-11-01

    Atmospheric aerosols can contain thousands of organic compounds which impact aerosol surface tension, affecting aerosol properties such as heterogeneous reactivity, ice nucleation, and cloud droplet formation. We present new experimental data for the surface tension of complex, reactive organic-inorganic aqueous mixtures mimicking tropospheric aerosols. Each solution contained 2-6 organic compounds, including methylglyoxal, glyoxal, formaldehyde, acetaldehyde, oxalic acid, succinic acid, leucine, alanine, glycine, and serine, with and without ammonium sulfate. We test two semi-empirical surface tension models and find that most reactive, complex, aqueous organic mixtures which do not contain salt are well described by a weighted Szyszkowski-Langmuir (S-L) model which was first presented by Henning et al. (2005). Two approaches for modeling the effects of salt were tested: (1) the Tuckermann approach (an extension of the Henning model with an additional explicit salt term), and (2) a new implicit method proposed here which employs experimental surface tension data obtained for each organic species in the presence of salt used with the Henning model. We recommend the use of method (2) for surface tension modeling of aerosol systems because the Henning model (using data obtained from organic-inorganic systems) and Tuckermann approach provide similar modeling results and goodness-of-fit (χ2) values, yet the Henning model is a simpler and more physical approach to modeling the effects of salt, requiring less empirically determined parameters.

  19. Controllable lasing performance in solution-processed organic-inorganic hybrid perovskites.

    PubMed

    Kao, Tsung Sheng; Chou, Yu-Hsun; Hong, Kuo-Bin; Huang, Jiong-Fu; Chou, Chun-Hsien; Kuo, Hao-Chung; Chen, Fang-Chung; Lu, Tien-Chang

    2016-11-03

    Solution-processed organic-inorganic perovskites are fascinating due to their remarkable photo-conversion efficiency and great potential in the cost-effective, versatile and large-scale manufacturing of optoelectronic devices. In this paper, we demonstrate that the perovskite nanocrystal sizes can be simply controlled by manipulating the precursor solution concentrations in a two-step sequential deposition process, thus achieving the feasible tunability of excitonic properties and lasing performance in hybrid metal-halide perovskites. The lasing threshold is at around 230 μJ cm(-2) in this solution-processed organic-inorganic lead-halide material, which is comparable to the colloidal quantum dot lasers. The efficient stimulated emission originates from the multiple random scattering provided by the micro-meter scale rugged morphology and polycrystalline grain boundaries. Thus the excitonic properties in perovskites exhibit high correlation with the formed morphology of the perovskite nanocrystals. Compared to the conventional lasers normally serving as a coherent light source, the perovskite random lasers are promising in making low-cost thin-film lasing devices for flexible and speckle-free imaging applications.

  20. Solution-processible organic-inorganic hybrid bipolar field-effect transistors

    NASA Astrophysics Data System (ADS)

    Chae, Gil Jo; Kim, Kang Dae; Cho, Shinuk; Walker, Bright; Seo, Jung Hwa

    2016-04-01

    Organic-inorganic hybrid bipolar field-effect transistors (HBFETs) comprising a layer of p-type organic poly(3-hexylthiophene) (P3HT) separated from a parallel layer of n-type inorganic zinc oxide (ZnO) were demonstrated by solution processing. In order to achieve balanced hole and electron mobilities, we initially optimized the hole-transporting P3HT channel by the addition of the polar non-solvent acetonitrile (AN) to P3HT solutions in chloroform, which induced a selfassembled nano-fibril morphology and an enhancement of hole mobilities. For the electron channel, a wet-chemically-prepared ZnO layer was optimized by thermal annealing. Unipolar P3HT FET with 5% AN exhibited the highest hole mobility of 7.20 × 10-2 cm2V-1s-1 while the highest electron mobility (3.64 × 10-2 cm2V-1s-1) was observed in unipolar ZnO FETs annealed at 200°C. The organic-inorganic HBFETs consisting of the P3HT layer with 5% AN and ZnO annealed at 200°C exhibited well-balanced hole and electron mobilities of 1.94 × 10-2 cm2V-1s-1 and 1.98 × 10-2 cm2V-1s-1, respectively.

  1. Electrochromic conductive polymer fuses for hybrid organic/inorganic semiconductor memories

    NASA Astrophysics Data System (ADS)

    Möller, Sven; Forrest, Stephen R.; Perlov, Craig; Jackson, Warren; Taussig, Carl

    2003-12-01

    We demonstrate a nonvolatile, write-once-read-many-times (WORM) memory device employing a hybrid organic/inorganic semiconductor architecture consisting of thin film p-i-n silicon diode on a stainless steel substrate integrated in series with a conductive polymer fuse. The nonlinearity of the silicon diodes enables a passive matrix memory architecture, while the conductive polyethylenedioxythiophene:polystyrene sulfonic acid polymer serves as a reliable switch with fuse-like behavior for data storage. The polymer can be switched at ˜2 μs, resulting in a permanent decrease of conductivity of the memory pixel by up to a factor of 103. The switching mechanism is primarily due to a current and thermally dependent redox reaction in the polymer, limited by the double injection of both holes and electrons. The switched device performance does not degrade after many thousand read cycles in ambient at room temperature. Our results suggest that low cost, organic/inorganic WORM memories are feasible for light weight, high density, robust, and fast archival storage applications.

  2. Stable hybrid organic/inorganic photocathodes for hydrogen evolution with amorphous WO3 hole selective contacts.

    PubMed

    Mezzetti, Alessandro; Fumagalli, Francesco; Alfano, Antonio; Iadicicco, Daniele; Antognazza, Maria Rosa; di Fonzo, Fabio

    2017-03-08

    Photoelectrochemical H2 production through hybrid organic/inorganic interfaces exploits the capability of polymeric absorbers to drive photo-induced electron transfer to an electrocatalyst in a water environment. Photoelectrode architectures based on solution-processed organic semiconductors are now emerging as low-cost alternatives to crystalline inorganic semiconductors based on Si, oxides and III-V alloys. In this work, we demonstrate that the stability of a hybrid organic/inorganic photocathode, employing a P3HT:PCBM blend as photoactive material, can be considerably improved by introducing an electrochemically stable WO3 hole selective layer, paired with a TiO2 electron selective layer. This hybrid photoelectrode exhibits a photocurrent of 2.48 mA cm(-2) at 0 VRHE, +0.56 VRHE onset potential and a state-of the art operational activity of more than 10 hours. This work gives the perspective that photoelectrodes based on organic semiconductors, coupled with proper inorganic selective contacts, represent a sound new option for the efficient and durable photoelectrochemical conversion of solar energy into fuels.

  3. Preparation, characterization and application of organic-inorganic hybrid caffeine imprinted monolith.

    PubMed

    Liu, Xiaofang; Sun, Na; Zhu, Quanfei; Wu, Mei; Ye, Yong; Chen, Huaixia

    2013-08-23

    The present work aims to synthesize an organic-inorganic hybrid caffeine imprinted monolith using one-step method. The synthesis conditions such as the type of inorganic precursor and porogenic solvent, the molar ratios of the monomer and cross-linker, the volume ratio of the inorganic alcoholysate and organic part were optimized. The morphology of the monolith was studied by scanning electron microscopy and Fourier transform infrared spectra. The imprinted factor of the monolith for caffeine reached 3.02. A simple, rapid and sensitive method for the determination of caffeine in children's milk using the organic-inorganic hybrid caffeine imprinted polymer monolith microextraction combined with high-performance liquid chromatography-photodiodes array detector was developed. Several parameters affecting the sample pretreatment were investigated, including the type, flow rate and volume of eluent, the flow rate and volume of sample solution. The assay exhibited a linear dynamic range of 8-500μgL(-1) with the correlation coefficient above 0.9987. Lower limits of detection (LOD, at S/N=3) and quantification (LOQ, at S/N=10) in children's milk samples were 2.7 and 8μgL(-1). Recoveries of caffeine from spiked children's milk ranged from 85 to 104% with relative standard deviations of less than 8.9%.

  4. Bioadhesive film formed from a novel organic-inorganic hybrid gel for transdermal drug delivery system.

    PubMed

    Guo, Ruiwei; Du, Xiaoyan; Zhang, Rui; Deng, Liandong; Dong, Anjie; Zhang, Jianhua

    2011-11-01

    A novel organic-inorganic hybrid film-forming agent for TDDS was developed by a modified poly(vinyl alcohol) (PVA) gel using γ-(glycidyloxypropyl)trimethoxysilane (GPTMS) as an inorganic-modifying agent, poly(N-vinyl pyrrolidone) (PVP) as a tackifier and glycerol (GLY) as a plasticizer. The prepared gels can be applied to the skin by a coating method and in situ form very thin and transparent films with good performance, comfortable feel and cosmetic attractiveness. The key properties of the bioadhesive films produced from the hybrid gels were investigated and the results showed that the incorporation of appropriate GPTMS (GPTMS/(PVA+GPTMS) in the range of 20-30%) into the PVA matrix not only can significantly enhance mechanical strength and skin adhesion properties of the resultant film, but also can decrease the crystalline regions of PVA and hence facilitate the diffusion of water vapor and drug. Furthermore, the investigations into in vivo skin irritation suggested the films caused non-irritation to skin after topical application for 120 h. In conclusion, the bioadhesive films formed from organic-inorganic hybrid gels possessed very good qualities for application on the skin and may provide a promising formulation for TDDS, especially when the patient acceptability from an aesthetic perspective of the dosage form is a prime consideration. Copyright © 2011 Elsevier B.V. All rights reserved.

  5. Giant Rashba Splitting in CH3NH3PbBr3 Organic-Inorganic Perovskite

    NASA Astrophysics Data System (ADS)

    Niesner, Daniel; Wilhelm, Max; Levchuk, Ievgen; Osvet, Andres; Shrestha, Shreetu; Batentschuk, Miroslaw; Brabec, Christoph; Fauster, Thomas

    2016-09-01

    As they combine decent mobilities with extremely long carrier lifetimes, organic-inorganic perovskites open a whole new field in optoelectronics. Measurements of their underlying electronic structure, however, are still lacking. Using angle-resolved photoelectron spectroscopy, we measure the valence band dispersion of single-crystal CH3NH3PbBr3. The dispersion of the highest energy band is extracted applying a modified leading edge method, which accounts for the particular density of states of organic-inorganic perovskites. The surface Brillouin zone is consistent with bulk-terminated surfaces both in the low-temperature orthorhombic and the high-temperature cubic phase. In the low-temperature phase, we find a ring-shaped valence band maximum with a radius of 0.043 Å-1 , centered around a 0.16 eV deep local minimum in the dispersion of the valence band at the high-symmetry point. Intense circular dichroism is observed. This dispersion is the result of strong spin-orbit coupling. Spin-orbit coupling is also present in the room-temperature phase. The coupling strength is one of the largest ones reported so far.

  6. Self-assembly of ferromagnetic organic-inorganic perovskite-like films.

    PubMed

    Akhtar, Naureen; Polyakov, Alexey O; Aqeel, Aisha; Gordiichuk, Pavlo; Blake, Graeme R; Baas, Jacob; Amenitsch, Heinz; Herrmann, Andreas; Rudolf, Petra; Palstra, Thomas T M

    2014-12-10

    Perovskite-based organic-inorganic hybrids hold great potential as active layers in electronics or optoelectronics or as components of biosensors. However, many of these applications require thin films grown with good control over structure and thickness--a major challenge that needs to be addressed. The work presented here is an effort towards this goal and concerns the layer-by-layer deposition at ambient conditions of ferromagnetic organic-inorganic hybrids consisting of alternating CuCl4-octahedra and organic layers. The Langmuir-Blodgett technique used to assemble these structures provides intrinsic control over the molecular organization and film thickness down to the molecular level. Magnetic characterization reveals that the coercive field for these thin films is larger than that for solution-grown layered bulk crystals. The strategy presented here suggests a promising cost effective route to facilitate the excellently controlled growth of sophisticated materials on a wide variety of substrates that have properties relevant for the high density storage media and spintronic devices.

  7. Ag-Incorporated Organic-Inorganic Perovskite Films and Planar Heterojunction Solar Cells.

    PubMed

    Chen, Qi; Chen, Lei; Ye, Fengye; Zhao, Ting; Tang, Feng; Rajagopal, Adharsh; Jiang, Zheng; Jiang, Shenlong; Jen, Alex K-Y; Xie, Yi; Cai, Jinhua; Chen, Liwei

    2017-04-06

    Controlled doping for adjustable material polarity and charge carrier concentration is the basis of semiconductor materials and devices, and it is much more difficult to achieve in ionic semiconductors (e.g., ZnO and GaN) than in covalent semiconductors (e.g., Si and Ge), due to the high intrinsic defect density in ionic semiconductors. The organic-inorganic perovskite material, which is frenetically being researched for applications in solar cells and beyond, is also an ionic semiconductor. Here we present the Ag-incorporated organic-inorganic perovskite films and planar heterojunction solar cells. Partial substitution of Pb(2+) by Ag(+) leads to improved film morphology, crystallinity, and carrier dynamics as well as shifted Fermi level and reduced electron concentration. Consequently, in planar heterojunction photovoltaic devices with inverted stacking structure, Ag incorporation results in an enhancement of the power conversion efficiency from 16.0% to 18.4% in MAPbI3 based devices and from 11.2% to 15.4% in MAPbI3-xClx based devices. Our work implies that Ag incorporation is a feasible route to adjust carrier concentrations in solution-processed perovskite materials in spite of the high concentration of intrinsic defects.

  8. A novel organic/inorganic polymer membrane based on poly(vinyl alcohol)/poly(2-acrylamido-2-methyl-1-propanesulfonic acid/3-glycidyloxypropyl trimethoxysilane polymer electrolyte membrane for direct methanol fuel cells

    NASA Astrophysics Data System (ADS)

    Yang, Chun-Chen; Lue, Shingjiang Jessie; Shih, Jeng-Ywan

    2011-05-01

    Poly(vinyl alcohol)/poly(2-acrylamido-2-methyl-1-propanesulfonic acid (PAMPS)/3-glycidyloxypropyl)trimethoxysilane (PVA/PAMPS/GPTMS) organic/inorganic proton-conducting polymer membranes are prepared by a solution casting method. PAMPS is a polymeric acid commonly used as a primary proton donor, while 3-(glycidyloxypropyl)trimethoxysilane (GPTMS) is an inorganic precursor forming a semi-interpenetrating network (SIPN). Varying amounts of sulfosuccinic acid (SSA) are used as the cross-linker and secondary proton source. The characteristic properties of PVA/PAMPS/GPTMS composite membranes are investigated by thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), micro-Raman spectroscopy and the AC impedance method. Direct methanol fuel cells (DMFCs) made of PVA/PAMPS/GPTMS composite membranes are assembled and examined. Experimental results indicate that DMFCs employing an inexpensive, non-perfluorinated, organic/inorganic SIPN membrane achieve good electrochemical performance. The highest peak power density of a DMFC using PVA/PAMPS/GPTMS composite membrane with 2 M CH3OH solution fuel at ambient temperature is 23.63 mW cm-2. The proposed organic/inorganic proton-conducting membrane based on PVA/PAMPS/GPTMS appears to be a viable candidate for future DMFC applications.

  9. Structural direction of hybrid organic-inorganic materials: Synthesis of vanadium oxyfluoride, copper vanadate, and copper molybdate solid state materials through solvuthermal and solution methods

    NASA Astrophysics Data System (ADS)

    Deburgomaster, Paul

    The vast structural complexity of inorganic oxides with structure directing organocations, nitrogen containing ligands and organophosphonate ligands was explored. The hydrothermal reaction conditions utilized herein include the variables of temperature, pH, fill volume and stoichiometry. The systems studied included: (1) the complex materials rendered from reactions of organoamine cations on the structure of vanadium oxides, oxyfluorides and fluorides. As with other systems, the influence of the mineralizer HF was not limited to pH as fluorine incorporation was not uncommon. In specific cases this coincided with reduction of vanadium sites. (2) The copper-organonitrogen ligand/vanadium oxide/aromatic phosphonate system has been studied. The rigid aromatic di- and tri-phosphonate tethers have provided a series of materials which are structurally distinct from the previously investigated aliphatic series. The inclusion of copper-coordinated nitrogen bi- and tri-dentate ligands also provided structural diversity. Product composition was highly influenced by the HF/V ratio. A similar study was conducted with the ligand 1,4-carboxy-phenylphosphonic acid. (3) The preparation of a series of bimetallic organic-inorganic hybrid materials of the M(II)/VxOy/organonitrogen ligand class was further evidence of the utility of thermodynamically driven hydrothermal synthesis. (4) While decomposition of the spherical Keplerate molybdenum clusters is encountered under hydrothermal conditions, this highly soluble form of molybdate was investigated for the development of hybrid organic-inorganic room temperature solution synthesis.

  10. Three iodometalate organic-inorganic hybrid materials based on methylene blue cation: Syntheses, structures, properties and DFT calculations

    NASA Astrophysics Data System (ADS)

    Chai, Wen-Xiang; Lin, Jian; Song, Li; Qin, Lai-Shun; Shi, Hong-Sheng; Guo, Jia-Yu; Shu, Kang-Ying

    2012-08-01

    The functional dye of methylene blue (MB) has been employed for seeking new organic-inorganic hybrid photochromic materials. Although the photochromism has not been observed yet, three iodometalate compounds, namely (MB) (PbI3) (DMF) (1), (MB)4(Cu2I4)2 (2), and (MB)3(Bi2I9) (DMF)2 (3), have been synthesized and characterized. The iodometalate anion features as a [PbI3]∞- chain in 1, a dinuclear unit of Cu2I42- in 2, and a dinuclear unit of Bi2I93- in 3. Due to the synergy of cations and anions, the MB+ cations present supramolecular column stacks in 1 and 3, but a novel supramolecular octamer structure in 2. Their thermogravimetric analyses reveal that the polymeric inorganic anion structure is helpful to increase the stability of cation whereas the discrete structure is adverse. For seeking some clues which is significant to searching new photochromic systems, the density functional theory (DFT) studies have been performed on 1, in which the electronic structure analyses suggests that the stacking mode of cations and anions could be also an important factor influencing the charge transfer between them. In addition, dielectric hysteresis loop testing has been performed on 1 due to its polar space group of Cc.

  11. A simple synthetic route to polyoxovanadate-based organic-inorganic hybrids using EEDQ as an ester coupling agent.

    PubMed

    Bayaguud, Aruuhan; Li, JianDa; She, Shan; Wei, Yongge

    2017-04-05

    A reaction strategy for the post-functionalization of hexavanadate derivatives is presented herein. In this study, five polyoxovanadate-based organic-inorganic hybrids TBA2[V6O13{(OCH2)3CCOO(CH2)15CH3}2] (2), TBA2[V6O13{(OCH2)3CCOO(CH2)8CH[double bond, length as m-dash]CH2}2] (3), TBA2[V6O13{(OCH2)3CCOOCH2CF3}2] (4), TBA2[V6O13{(OCH2)3CCOO(CH2CH2O)3CH3}2] (5), and TBA2[V6O13{(OCH2)3CCOO(CH2)12OH}2]·2CH3CH2OH (6) were successfully synthesized via esterification of carboxylic acid groups-containing TBA2[V6O13{(OCH2)3CCOOH}2] (1) with five alcohols possessing different functional groups. These hybrids were characterized by single crystal X-ray diffraction, IR, ESI-MS, (1)H and (13)C-NMR spectroscopies, and elemental analysis. Moreover, the formation of large vesicles was observed in a mixed solution of compound 2 due to its surfactant-like structure.

  12. High voltage and efficient bilayer heterojunction solar cells based on an organic-inorganic hybrid perovskite absorber with a low-cost flexible substrate.

    PubMed

    Chiang, Yi-Fang; Jeng, Jun-Yuan; Lee, Mu-Huan; Peng, Shin-Rung; Chen, Peter; Guo, Tzung-Fang; Wen, Ten-Chin; Hsu, Yao-Jane; Hsu, Ching-Ming

    2014-04-07

    A low temperature (<100 °C), flexible solar cell based on an organic-inorganic hybrid CH3NH3PbI3 perovskite-fullerene planar heterojunction (PHJ) is successfully demonstrated. In this manuscript, we study the effects of energy level offset between a solar absorber (organic-inorganic hybrid CH3NH3PbI3 perovskite) and the selective contact materials on the photovoltaic behaviors of the planar organometallic perovskite-fullerene heterojunction solar cells. We find that the difference between the highest occupied molecular orbital (HOMO) level of CH3NH3PbI3 perovskite and the Fermi level of indium-tin-oxide (ITO) dominates the voltage output of the device. ITO films on glass or on the polyethylene terephthalate (PET) flexible substrate with different work functions are investigated to illustrate this phenomenon. The higher work function of the PET/ITO substrate decreases the energy loss of hole transfer from the HOMO of perovskite to ITO and minimizes the energy redundancy of the photovoltage output. The devices using the high work function ITO substrate as contact material show significant open-circuit voltage enhancement (920 mV), with the power conversion efficiency of 4.54%, and these types of extra-thin planar bilayer heterojunction solar cells have the potential advantages of low-cost and lightweight.

  13. Absorption and scattering effects by silver nanoparticles near the interface of organic/inorganic semiconductor tandem films

    NASA Astrophysics Data System (ADS)

    Nemes, Coleen T.; Vijapurapu, Divya K.; Petoukhoff, Christopher E.; Cheung, Gary Z.; O'Carroll, Deirdre M.

    2013-08-01

    nanoparticles placed near an organic/inorganic interface can be employed for light management in tandem or hybrid organic/inorganic thin-film semiconductor configurations for solar energy harvesting applications or light detection applications.

  14. Structure and Growth Control of Organic-Inorganic Halide Perovskites for Optoelectronics: From Polycrystalline Films to Single Crystals.

    PubMed

    Chen, Yani; He, Minhong; Peng, Jiajun; Sun, Yong; Liang, Ziqi

    2016-04-01

    Recently, organic-inorganic halide perovskites have sparked tremendous research interest because of their ground-breaking photovoltaic performance. The crystallization process and crystal shape of perovskites have striking impacts on their optoelectronic properties. Polycrystalline films and single crystals are two main forms of perovskites. Currently, perovskite thin films have been under intensive investigation while studies of perovskite single crystals are just in their infancy. This review article is concentrated upon the control of perovskite structures and growth, which are intimately correlated for improvements of not only solar cells but also light-emitting diodes, lasers, and photodetectors. We begin with the survey of the film formation process of perovskites including deposition methods and morphological optimization avenues. Strategies such as the use of additives, thermal annealing, solvent annealing, atmospheric control, and solvent engineering have been successfully employed to yield high-quality perovskite films. Next, we turn to summarize the shape evolution of perovskites single crystals from three-dimensional large sized single crystals, two-dimensional nanoplates, one-dimensional nanowires, to zero-dimensional quantum dots. Siginificant functions of perovskites single crystals are highlighted, which benefit fundamental studies of intrinsic photophysics. Then, the growth mechanisms of the previously mentioned perovskite crystals are unveiled. Lastly, perspectives for structure and growth control of perovskites are outlined towards high-performance (opto)electronic devices.

  15. Hybrid organic/inorganic interfaces as reversible label-free platform for direct monitoring of biochemical interactions.

    PubMed

    Vello, Tatiana P; da Silva, Larissa M B; Silva, Gustavo O; de Camargo, Davi H S; Corrêa, Cátia C; Bof Bufon, Carlos C

    2017-01-15

    The combination of organic and inorganic materials to create hybrid nanostructures is an effective approach to develop label-free platforms for biosensing as well as to overcome eventual leakage current-related problems in capacitive sensors operating in liquid. In this work, we combine an ultra-thin high-k dielectric layer (Al2O3) with a nanostructured organic functional tail to create a platform capable of monitoring biospecific interactions directly in liquid at very low analyte concentrations. As a proof of concept, a reversible label-free glutathione-S-transferase (GST) biosensor is demonstrated. The sensor can quantify the GST enzyme concentration through its biospecific interaction with tripeptide reduced glutathione (GSH) bioreceptor directly immobilized on the dielectric surface. The enzymatic reaction is monitored by electrical impedance measurements, evaluating variations on the overall capacitance values according to the GST concentration. The biosensor surface can be easily regenerated, allowing the detection of GST with the very same device. The biosensor shows a linear response in the range of 200pmolL(-1) to 2µmolL(-1), the largest reported in the literature along with the lowest detectable GST concentration (200pmolL(-1)) for GST label-free sensors. Such a nanostructured hybrid organic-inorganic system represents a powerful tool for the monitoring of biochemical reactions, such as protein-protein interactions, for biosensing and biotechnological applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Effect of Light Intensity and Temperature on the Current Voltage Characteristics of Al/ SY/ p- Si Organic-Inorganic Heterojunction

    NASA Astrophysics Data System (ADS)

    Imer, Arife Gencer; Ocak, Yusuf Selim

    2016-10-01

    An organic-inorganic contact was fabricated by forming a thin film of sunset yellow dye ( SY) on a p- Si wafer. The device showed a good rectification property, and the sunset yellow thin film modified the barrier height (Φb) of Al/ p- Si contact by influencing the space charge region. The heterojunction had a strong response to the different illumination intensities and showed that it can be suitable for photodiode applications. The I- V measurements of the device were also applied in the temperature range of 100-500 K. It was seen that characteristic parameters of the device were strongly dependent upon temperature. While the value of Φb increased, the ideality factor ( n) decreased with the increase in temperature. This variation was attributed to spatial inhomogeneity at the interface. The Norde function was used to determine the temperature-dependent series resistance and Φb values, and there was a good agreement with that of ln I- V data. The values of the Richardson constant ( A*) and mean Φb were determined as 29.47 Acm-2 K-2 by means of a modified activation energy plot, matching with a theoretical one, and 1.032 eV, respectively. Therefore, it was stated that the current voltage characteristic with the temperature can be explained by thermionic emission theory with Gaussian distribution of the Φb at the interface.

  17. Multiple-stage structure transformation of organic-inorganic hybrid perovskite CH3NH3PbI3

    DOE PAGES

    Chen, Qiong; Liu, Henan; Kim, Hui -Seon; ...

    2016-09-15

    In this study, by performing spatially resolved Raman and photoluminescence spectroscopy with varying excitation wavelength, density, and data acquisition parameters, we achieve a unified understanding towards the spectroscopy signatures of the organic-inorganic hybrid perovskite, transforming from the pristine state (CH3NH3PbI3) to the fully degraded state (i.e., PbI2) for samples with varying crystalline domain size from mesoscopic scale (approximately 100 nm) to macroscopic size (centimeters), synthesized by three different techniques. We show that the hybrid perovskite exhibits multiple stages of structure transformation occurring either spontaneously or under light illumination, with exceptionally high sensitivity to the illumination conditions (e.g., power, illumination time,more » and interruption pattern). We highlight four transformation stages (stages I-IV, with stage I being the pristine state) along either the spontaneous or photoinduced degradation path exhibiting distinctly different Raman spectroscopy features at each stage, and point out that previously reported Raman spectra in the literature reflect highly degraded structures of either stage III or stage IV. Additional characteristic optical features of partially degraded materials under the joint action of spontaneous and photodegradation are also given. This study offers reliable benchmark results for understanding the intrinsic material properties and structure transformation of this unique category of hybrid materials, and the findings are pertinently important to a wide range of potential applications where the hybrid material is expected to function in greatly different environment and light-matter interaction conditions.« less

  18. Experimental and theoretical study of AC electrical conduction mechanisms of Organic-inorganic hybrid compound Bis (4-acetylanilinium) tetrachlorocadmiate (II)

    NASA Astrophysics Data System (ADS)

    Jellibi, A.; Chaabane, I.; Guidara, K.

    2016-06-01

    A new organic-inorganic bis (4-acetylaniline) tetrachlorocadmate [C8H10NO]2[CdCl4] can be obtained by slow evaporation at room temperature and characterized by X-ray powder diffraction. It crystallized in an orthorhombic system (Cmca space group). The material electrical properties were characterized by impedance spectroscopy technique in the frequency range from 209 Hz-5 MHz and temperature 413 to 460 K. Besides, the impedance plots show semicircle arcs at different temperatures and an electrical equivalent circuit has been proposed to interpret the impedance results. The circuits consist of the parallel combination of a resistance (R), capacitance (C) and fractal capacitance (CPE). The variation of the exponent s as a function of temperature suggested that the conduction mechanism in Bis (4-acetylanilinium) tetrachlorocadmiate compound is governed by two processes which can be ascribed to a hopping transport mechanism: correlated barrier hopping (CBH) model below 443 K and the small polaron tunneling (SPT) model above 443 K.

  19. Fabrication of nanoporous arrays from photosensitive organic-inorganic hybrid materials by using an UV soft nanoimprint technique.

    PubMed

    Zhang, Xuehua; Que, Wenxiu; Hu, Jiaxing; Chen, Jin; Zhang, Jin; Liu, Weiguo

    2013-02-01

    A honeycomb-like regular nanoporous pattern built in the photosensitive organic-inorganic hybrid film was fabricated by an UV soft nanoimprint technique. Polydimethylsiloxane (PDMS) soft mold was firstly replicated from an anodic aluminum oxide (AAO) template obtained by using a two-step anodization method. Scanning electron microscopy images show that the AAO template has a regular honeycomb-like nanoporous structure, while the PDMS soft mold has a relief structure of nanopillar arrays. Photosensitive TiO2-contained organic-inorganic hybrid films, which were prepared by combining a low temperature sol-gel process with a spin-coating technique, were used as the imprinted layer. Thus, a honeycomb-like regular nanoporous pattern built in the hybrid film can be easily obtained by imprinting the PDMS soft mold into the photosensitive hybrid film under an UV-irradiation. The as-fabricated organic-inorganic regular nonporous arrays have potential applications in two-dimensional photonic crystal.

  20. Highly Efficient Red-Light Emission in An Organic-Inorganic Hybrid Ferroelectric: (Pyrrolidinium)MnCl₃.

    PubMed

    Zhang, Yi; Liao, Wei-Qiang; Fu, Da-Wei; Ye, Heng-Yun; Chen, Zhong-Ning; Xiong, Ren-Gen

    2015-04-22

    Luminescence of ferroelectric materials is one important property for technological applications, such as low-energy electron excitation. However, the vast majority of doped inorganic ferroelectric materials have low luminescent efficiency. The past decade has envisaged much progress in the design of both ferroelectric and luminescent organic-inorganic hybrid complexes for optoelectronic applications. The combination of ferroelectricity and luminescence within organic-inorganic hybrids would lead to a new type of luminescent ferroelectric multifunctional materials. We herein report a hybrid molecular ferroelectric, (pyrrolidinium)MnCl3, which exhibits excellent ferroelectricity with a saturation polarization of 5.5 μC/cm(2) as well as intense red luminescence with high quantum yield of 56% under a UV excitation. This finding may extend the application of organic-inorganic hybrid compounds to the field of ferroelectric luminescence and/or multifunctional devices.

  1. Ultrafast pulse generation from erbium-doped fiber laser modulated by hybrid organic-inorganic halide perovskites

    NASA Astrophysics Data System (ADS)

    Jiang, Guobao; Miao, Lili; Yi, Jun; Huang, Bin; Peng, Wei; Zou, Yanhong; Huang, Huihui; Hu, Wei; Zhao, Chujun; Wen, Shuangchun

    2017-04-01

    We report the nonlinear optical responses of organic-inorganic halide perovskite CH3NH3PbI3 and its application in ultrafast pulse generation from an erbium-doped fiber laser in the optical communication band. By adopting the Z-scan technique, the third-order nonlinear optical responses of the organic-inorganic halide perovskites have been characterized. An ultrafast optical pulse with a pulse width of 661 fs centered at a wavelength of 1555 nm has been delivered via the nonlinear optical material introduced into the fiber laser cavity. Our experimental results confirm that the organic-inorganic halide perovskite possesses obvious third-order nonlinear optical responses in the C-band window and manifests its application potential in nonlinear optoelectronic devices.

  2. New magnetic organic inorganic composites based on hydrotalcite-like anionic clays for drug delivery

    NASA Astrophysics Data System (ADS)

    Carja, Gabriela; Chiriac, Horia; Lupu, Nicoleta

    2007-04-01

    The structural "memory effect" of anionic clays was used to obtain layered double hydroxides (LDHs) with tailored magnetic properties, by loading iron oxides and/or spinel structures on iron partially substituted hydrotalcite-like materials. The obtained magnetic layered structures were further used as precursors for new hybrid nanostructures, such as aspirin-hydrotalcite-like anionic clays. Transmission electron microscopy (TEM) analysis shows that small iron oxide or spinel nanoparticles coexist with the fibrous drug particles on the surface of partially aggregated typical clay-like particles. The specific saturation magnetization of the loaded LDHs can be increased up to 70 emu/g by using specific post-synthesis treatments.

  3. Biomimetic design and assembly of organic-inorganic composite films with simultaneously enhanced strength and toughness.

    PubMed

    Han, Jingbin; Dou, Yibo; Yan, Dongpeng; Ma, Jing; Wei, Min; Evans, David G; Duan, Xue

    2011-05-14

    Inorganic nanoplatelet reinforced polymer films were fabricated via alternate layer-by-layer assembly of layered double hydroxide (LDH) nanoplatelets with poly(vinyl alcohol) (PVA), which showed largely enhanced strength and good ductility simultaneously. © The Royal Society of Chemistry 2011

  4. Biosensor made with organic-inorganic hybrid composite: cellulose-tin oxide

    NASA Astrophysics Data System (ADS)

    Mahadeva, Suresha K.; Nayak, Jyoti; Kim, Jaehwan

    2011-04-01

    Cellulose is the most abundant polymer found in nature, inexhaustible, low cost, easy processing, renewable, biodegradable and biocompatible. SnO2, is a known electrical conductor that is optically transparent in the visible spectrum with a wide band gap at room temperature. Thus, a hybrid nanocomposite of cellulose and SnO2can offer a unique property of cellulose combined with electrical properties of SnO2. These unique properties of cellulose- SnO2 hybrid nanocomposite can be capitalized to design flexible, biodegradable and low cost biosensors. Preparation and characterization of cellulose-SnO2 hybrid nanocomposite and its application as a flexible urea biosensor was demonstrated in this paper. It is observed sensitivity of cellulose-SnO2 hybrid nanocomposite urea biosensor was increased linearly with deposition time. As deposition time increased, amount of tin oxide deposited over cellulose surface also increases, so as to increase the amount of enzyme immobilization and attachment of analyte, attributes to large current output and high sensitivity of sensor. Increasing enzyme activity is observed, with increasing urea concentration. Experimental results suggested that, the proposed biosensor under study is suitable for urea detection below 50 mM.

  5. Biosensor made with organic-inorganic hybrid composite: cellulose-tin oxide

    NASA Astrophysics Data System (ADS)

    K. Mahadeva, Suresha; Nayak, Jyoti; Kim, Jaehwan

    2011-03-01

    Cellulose is the most abundant polymer found in nature, inexhaustible, low cost, easy processing, renewable, biodegradable and biocompatible. SnO2, is a known electrical conductor that is optically transparent in the visible spectrum with a wide band gap at room temperature. Thus, a hybrid nanocomposite of cellulose and SnO2can offer a unique property of cellulose combined with electrical properties of SnO2. These unique properties of cellulose- SnO2 hybrid nanocomposite can be capitalized to design flexible, biodegradable and low cost biosensors. Preparation and characterization of cellulose-SnO2 hybrid nanocomposite and its application as a flexible urea biosensor was demonstrated in this paper. It is observed sensitivity of cellulose-SnO2 hybrid nanocomposite urea biosensor was increased linearly with deposition time. As deposition time increased, amount of tin oxide deposited over cellulose surface also increases, so as to increase the amount of enzyme immobilization and attachment of analyte, attributes to large current output and high sensitivity of sensor. Increasing enzyme activity is observed, with increasing urea concentration. Experimental results suggested that, the proposed biosensor under study is suitable for urea detection below 50 mM.

  6. Spontaneously amplified homochiral organic-inorganic nano-helix complexes via self-proliferation

    NASA Astrophysics Data System (ADS)

    Zhai, Halei; Quan, Yan; Li, Li; Liu, Xiang-Yang; Xu, Xurong; Tang, Ruikang

    2013-03-01

    Most spiral coiled biomaterials in nature, such as gastropod shells, are homochiral, and the favoured chiral feature can be precisely inherited. This inspired us that selected material structures, including chirality, could be specifically replicated into the self-similar populations; however, a physicochemical understanding of the material-based heritage is unknown. We study the homochirality by using calcium phosphate mineralization in the presence of racemic amphiphilic molecules and biological protein. The organic-inorganic hybrid materials with spiral coiling characteristics are produced at the nanoscale. The resulted helixes are chiral with the left- and right-handed characteristics, which are agglomerated hierarchically to from clusters and networks. It is interesting that each cluster or network is homochiral so that the enantiomorphs can be separated readily. Actually, each homochiral architecture is evolved from an original chiral helix, demonstrating the heritage of the matrix chirality during the material proliferation under a racemic condition. By using the Ginzburg-Landaue expression we find that the chiral recognition in the organic-inorganic hybrid formation may be determined by a spontaneous chiral separation and immobilization of asymmetric amphiphilic molecules on the mineral surface, which transferred the structural information from the mother matrix to the descendants by an energetic control. This study shows how biomolecules guide the selective amplification of chiral materials via spontaneous self-replication. Such a strategy can be applied generally in the design and production of artificial materials with self-similar structure characteristics.Most spiral coiled biomaterials in nature, such as gastropod shells, are homochiral, and the favoured chiral feature can be precisely inherited. This inspired us that selected material structures, including chirality, could be specifically replicated into the self-similar populations; however, a

  7. Corrosion resistance properties of organic inorganic hybrid coatings on 2024 aluminum alloy

    NASA Astrophysics Data System (ADS)

    Liu, Yan; Sun, Dezhi; You, Hong; Chung, Jong Shik

    2005-06-01

    Three kinds of organic-inorganic hybrid coatings modified by tetraethoxysilane (TEOS) were prepared using precursors of vinyltrimethoxysilane (VMS), [3-(methacryloxy)propyl] trimethoxysilane (MPMS) and (3-glycidoxyproyl) trimethoxysilane (GPMS). Properties of corrosion resistance were tested by potentiodynamic polarization curves. Salt spray test and SEM images were also employed to examine the ablitity of coatings to resist long-time corrosion. The results show that hybrid coatings are effective for inhibiting corrosion reaction. Corrosion currents of VMS coating and MPMS coating were 300 times smaller than that of bare sample. The corrosion current of hybrid coatings is smallest when TEOS content reaches 15-20%. It was found that VMS coatings have the strongest ability to resist salt spray corrosion.

  8. Preparations and Characterizations of Luminescent Two Dimensional Organic-inorganic Perovskite Semiconductors

    PubMed Central

    Zhang, Sanjun; Audebert, Pierre; Wei, Yi; Al Choueiry, Antoine; Lanty, Gaëtan; Bréhier, Antoine; Galmiche, Laurent; Clavier, Gilles; Boissière, Cédric; Lauret, Jean-Sébastien; Deleporte, Emmanuelle

    2010-01-01

    This article reviews the synthesis, structural and optical characterizations of some novel luminescent two dimensional organic-inorganic perovskite (2DOIP) semiconductors. These 2DOIP semiconductors show a self-assembled nano-layered structure, having the electronic structure of multi-quantum wells. 2DOIP thin layers and nanoparticles have been prepared through different methods. The structures of the 2DOIP semiconductors are characterized by atomic force microscopy and X-ray diffraction. The optical properties of the 2DOIP semiconductors are characterized from absorption and photoluminescence spectra measured at room and low temperatures. Influences of different components, in particular the organic parts, on the structural and optical properties of the 2DOIP semiconductors are discussed.

  9. Anomalous photovoltaic effect in organic-inorganic hybrid perovskite solar cells.

    PubMed

    Yuan, Yongbo; Li, Tao; Wang, Qi; Xing, Jie; Gruverman, Alexei; Huang, Jinsong

    2017-03-01

    Organic-inorganic hybrid perovskites (OIHPs) have been demonstrated to be highly successful photovoltaic materials yielding very-high-efficiency solar cells. We report the room temperature observation of an anomalous photovoltaic (APV) effect in lateral structure OIHP devices manifested by the device's open-circuit voltage (VOC) that is much larger than the bandgap of OIHPs. The persistent VOC is proportional to the electrode spacing, resembling that of ferroelectric photovoltaic devices. However, the APV effect in OIHP devices is not caused by ferroelectricity. The APV effect can be explained by the formation of tunneling junctions randomly dispersed in the polycrystalline films, which allows the accumulation of photovoltage at a macroscopic level. The formation of internal tunneling junctions as a result of ion migration is visualized with Kelvin probe force microscopy scanning. This observation points out a new avenue for the formation of large and continuously tunable VOC without being limited by the materials' bandgap.

  10. Synthesis and characterization of tunable coumarin- linked glasses as new class of organic/inorganic phosphors

    SciTech Connect

    Luridiana, Alberto; Pretta, Gianluca; Secci, Francesco; Frongia, Angelo; Chiriu, Daniele; Carbonaro, Carlo Maria; Corpino, Riccardo; Ricci, Pier Carlo

    2014-10-21

    It is well known that stilbene with a trans conformation is highly fluorescent. From the viewpoint of molecular structure, coumarins bear a carbon-carbon double bond which is fixed as trans conformation as in trans-stilbene through a lactone structure. This can help to avoid the trans-cis transformation of the double bond under ultraviolet (UV) irradiation as observed in stilbene compounds and results in strong fluorescence and high fluorescence quantum yield and photostability in most of coumarin derivatives. Herein we report some preliminary results about the synthesis and spectroscopic characterization of tunable coumarins and the development of a new linkage protocol for the obtainment of monolayer coumarin-covalently linked glasses. The resulting organic/inorganic coumarin/silica based Self-Assembled Monolayer (SMA) film is proposed as new phosphors for the substituting of critical raw materials, like rare earths, in photonics applications.

  11. Exfoliation of self-assembled 2D organic-inorganic perovskite semiconductors

    SciTech Connect

    Niu, Wendy Baumberg, Jeremy J.; Eiden, Anna; Vijaya Prakash, G.

    2014-04-28

    Ultra-thin flakes of 2D organic-inorganic perovskite (C{sub 6}H{sub 9}C{sub 2}H{sub 4}NH{sub 3}){sub 2}PbI{sub 4} are produced using micromechanical exfoliation. Mono- and few-layer areas are identified using optical and atomic force microscopy, with an interlayer spacing of 1.6 nm. Refractive indices extracted from the optical spectra reveal a sample thickness dependence due to the charge transfer between organic and inorganic layers. These measurements demonstrate a clear difference in the exciton properties between “bulk” (>15 layers) and very thin (<8 layer) regions as a result of the structural rearrangement of organic molecules around the inorganic sheets.

  12. High-performance hybrid organic-inorganic solar cell based on planar n-type silicon

    NASA Astrophysics Data System (ADS)

    Chi, Dan; Qi, Boyuan; Wang, Jizheng; Qu, Shengchun; Wang, Zhanguo

    2014-05-01

    Hybrid organic-inorganic solar cells were fabricated by spin coating the hole transporting conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) film on n-type crystalline silicon (n-Si). By incorporating different additives into the PEDOT:PSS, the conductivity and wettability of PEDOT:PSS film are markedly improved, and the device performance is greatly enhanced accordingly. To further optimize the device performance, poly(3-hexylthiophene) (P3HT) layer was inserted between the n-Si and PEDOT:PSS layer. The P3HT layer blocks electrons from diffusing to the PEDOT:PSS, and hence reduces recombination at the anode side. The device eventually exhibits a high power conversion efficiency of 11.52%.

  13. Anomalous photovoltaic effect in organic-inorganic hybrid perovskite solar cells

    PubMed Central

    Yuan, Yongbo; Li, Tao; Wang, Qi; Xing, Jie; Gruverman, Alexei; Huang, Jinsong

    2017-01-01

    Organic-inorganic hybrid perovskites (OIHPs) have been demonstrated to be highly successful photovoltaic materials yielding very-high-efficiency solar cells. We report the room temperature observation of an anomalous photovoltaic (APV) effect in lateral structure OIHP devices manifested by the device’s open-circuit voltage (VOC) that is much larger than the bandgap of OIHPs. The persistent VOC is proportional to the electrode spacing, resembling that of ferroelectric photovoltaic devices. However, the APV effect in OIHP devices is not caused by ferroelectricity. The APV effect can be explained by the formation of tunneling junctions randomly dispersed in the polycrystalline films, which allows the accumulation of photovoltage at a macroscopic level. The formation of internal tunneling junctions as a result of ion migration is visualized with Kelvin probe force microscopy scanning. This observation points out a new avenue for the formation of large and continuously tunable VOC without being limited by the materials’ bandgap. PMID:28345043

  14. Mobile Ion Induced Slow Carrier Dynamics in Organic-Inorganic Perovskite CH₃NH₃PbBr₃.

    PubMed

    Chen, Sheng; Wen, Xiaoming; Sheng, Rui; Huang, Shujuan; Deng, Xiaofan; Green, Martin A; Ho-Baillie, Anita

    2016-03-02

    Here, we investigate photoluminescence (PL) and time-resolved photoluminescence (TRPL) in CH3NH3PbBr3 perovskite under continuous illumination, using optical and electro-optical techniques. Under continuous excitation at constant intensity, PL intensity and PL decay (carrier recombination) exhibit excitation intensity dependent reductions in the time scale of seconds to minutes. The enhanced nonradiative recombination is ascribed to light activated negative ions and their accumulation which exhibit a slow dynamics in a time scale of seconds to minutes. The observed result suggests that the organic-inorganic hybrid perovskite is a mixed electronic-ionic semiconductor. The key findings in this work suggest that ions are photoactivated or electro-activated and their accumulation at localized sites can result in a change of carrier dynamics. The findings are therefore useful for the understanding of instability of perovskite solar cells and shed light on the necessary strategies for performance improvement.

  15. The Rashba effect and indirect electron-hole recombination in hybrid organic-inorganic perovskites.

    PubMed

    Yu, Zhi-Gang

    2017-06-14

    Slow electron-hole recombination, characterized by the bimolecular coefficient k2 in hybrid organic-inorganic perovskites (HOIPs), is a key to their outstanding photovoltaic performance. The measured k2 in HOIPs strongly deviates from k2 ∝ T(-3/2) (T is the temperature) in typical direct-gap semiconductors. Here we show that the observed temperature dependence can be quantitatively accounted for by phonon-assisted recombination of electrons and holes located at the band extrema, which become indirect due to the Rashba effect. Polar optical phonons are most effective in facilitating this indirect recombination. The variation in k2 in HOIPs among different studies in the literature can be attributed to different Rashba strengths in their samples. Our results indicate that the confluence of the Rashba effect and polar coupling transform HOIPs into a unique indirect semiconductor that can accommodate both strong optical absorption and slow carrier dynamics.

  16. Assessment of Hybrid Organic-Inorganic Antimony Sulfides for Earth-Abundant Photovoltaic Applications.

    PubMed

    Yang, Ruo Xi; Butler, Keith T; Walsh, Aron

    2015-12-17

    Hybrid organic-inorganic solar absorbers are currently the subject of intense interest; however, the highest-performing materials contain Pb. Here we assess the potential of three Sb-based semiconductors: (i) Sb2S3, (ii) Cs2Sb8S13, and (iii) (CH3NH3)2Sb8S13. While the crystal structure of Sb2S3 is composed of 1D chains, 2D layers are formed in the ternary cesium and hybrid methylammonium antimony sulfide compounds. In each case, a stereochemically active Sb 5s(2) lone pair is found, resulting in a distorted coordination environment for the Sb cations. The bandgap of the binary sulfide is found to increase, while the ionization potential also changes, upon transition to the more complex compounds. Based on the predicted electronic structure, device configurations are suggested to be suitable for photovoltaic applications.

  17. Formation of thin films of organic-inorganic perovskites for high-efficiency solar cells.

    PubMed

    Stranks, Samuel D; Nayak, Pabitra K; Zhang, Wei; Stergiopoulos, Thomas; Snaith, Henry J

    2015-03-09

    Organic-inorganic perovskites are currently one of the hottest topics in photovoltaic (PV) research, with power conversion efficiencies (PCEs) of cells on a laboratory scale already competing with those of established thin-film PV technologies. Most enhancements have been achieved by improving the quality of the perovskite films, suggesting that the optimization of film formation and crystallization is of paramount importance for further advances. Here, we review the various techniques for film formation and the role of the solvents and precursors in the processes. We address the role chloride ions play in film formation of mixed-halide perovskites, which is an outstanding question in the field. We highlight the material properties that are essential for high-efficiency operation of solar cells, and identify how further improved morphologies might be achieved. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Purcell effect in an organic-inorganic halide perovskite semiconductor microcavity system

    SciTech Connect

    Wang, Jun; Wang, Yafeng; Hu, Tao; Wu, Lin; Shen, Xuechu; Chen, Zhanghai E-mail: zhanghai@fudan.edu.cn; Cao, Runan; Xu, Fei; Da, Peimei; Zheng, Gengfeng; Lu, Jian E-mail: zhanghai@fudan.edu.cn

    2016-01-11

    Organic-inorganic halide perovskite semiconductors with the attractive physics properties, including strong photoluminescence (PL), huge oscillator strengths, and low nonradiative recombination losses, are ideal candidates for studying the light-matter interaction in nanostructures. Here, we demonstrate the coupling of the exciton state and the cavity mode in the lead halide perovskite microcavity system at room temperature. The Purcell effect in the coupling system is clearly observed by using angle-resolved photoluminescence spectra. Kinetic analysis based on time-resolved PL reveals that the spontaneous emission rate of the halide perovskite semiconductor is significantly enhanced at resonance of the exciton energy and the cavity mode. Our results provide the way for developing electrically driven organic polariton lasers, optical devices, and on-chip coherent quantum light sources.

  19. Influence of temperature and light intensity on Ru(II) complex based organic-inorganic device

    SciTech Connect

    Asubay, Sezai; Durap, Feyyaz; Aydemir, Murat; Baysal, Akin; Ocak, Yusuf Selim; Tombak, Ahmet

    2016-03-25

    An organic-inorganic junction was fabricated by forming [Ru(Cy{sub 2}PNHCH{sub 2}-C{sub 4}H{sub 3}O)(η{sup 6}-p-cymene)Cl{sub 2}] complex thin film using spin coating technique on n-Si and evaporating Au metal on the film. It was seen that the structure had perfect rectification property. Current-voltage (I-V) measurements were carried out in dark and under various illumination conditions (between 50-100 mW/cm{sup 2}) and with the temperature range from 303 to 380 K. The structure showed unusually forward and reverse bias temperature and light sensing behaviors. It was seen that the current both in forward and reverse bias increased with the increase in light intensity and temperature.

  20. Revealing the properties of defects formed by CH3NH2 molecules in organic-inorganic hybrid perovskite MAPbBr3

    NASA Astrophysics Data System (ADS)

    Wang, Ji; Zhang, Ao; Yan, Jun; Li, Dan; Chen, Yunlin

    2017-03-01

    The properties of defects in organic-inorganic hybrid perovskite are widely studied from the first-principles calculation. However, the defects of methylamine (methylamine = CH3NH2), which would be easily formed during the preparation of the organic-inorganic hybrid perovskite, are rarely investigated. Thermodynamic properties as well as defect states of methylamine embedded MAPbX3 (MA = methyl-ammonium = CH3NH3, X = Br, I) are studied based on first-principles calculations of density functional theory. It was found that there is a shallow defect level near the highest occupied molecular orbital, which induced by the interstitial methylamine defect in MAPbBr3, will lead to an increase of photoluminescence. The calculation results showed that interstitial defect states of methylamine may move deeper due to the interaction between methylamine molecules and methyl-ammonium cations. It was also showed that the interstitial methylamine defect is stable at room temperature, and the defect can be removed easily by annealing.

  1. Organic-inorganic hybrid mesoporous polymers fabricated by using (CTA)2S2O8 as self-decomposed soft templates.

    PubMed

    Chen, Tianyou; Du, Binyang; Fan, Zhiqiang

    2012-10-23

    Organic-inorganic hybrid mesoporous polymers were successfully synthesized by using a template-directed free radical polymerization technique in aqueous solution at 0-5 °C with oxidative complexes as self-decomposed soft templates. The oxidative complexes ((CTA)(2)S(2)O(8)), which were formed between anionic oxidant (S(2)O(8)(2-)) and cationic surfactant (cetyltrimethylammonium bromide, CTAB) at 0-5 °C, can be automatically decomposed due to the reduction of S(2)O(8)(2-). No additional treatment was needed to remove the templates. The reactive functional monomer, 3-(trimethoxysilyl)propyl methacrylate (TMSPMA), was used as main monomer. Styrene was used as the comonomer. With simultaneous free radical copolymerization of TMSPMA and styrene, condensation of methoxysilyl groups, and the self-decomposition of (CTA)(2)S(2)O(8), organic-inorganic hybrid mesoporous polymers were successfully obtained. The mesoporous structures and morphologies of the resultant hybrid mesoporous polymers were found to be strongly dependent on the feed amounts of TMSPMA and styrene. In the absence of styrene, the hybrid polymer PTMSPMA exhibited mesh-like bicontinuous structures with mesopores and high surface area (335 m(2)/g). With the incorporation of styrene, mesoporous nanoparticles were obtained. The surface areas of the mesoporous nanoparticles decreased with the increase of styrene contents. The adsorption capabilities of such mesoporous polymers for organic dye (Congo red) and protein (bovine serum albumin) were also studied.

  2. Well-ordered organic-inorganic hybrid layered manganese oxide nanocomposites with excellent decolorization performance

    SciTech Connect

    Zhou, Junli; Yu, Lin; Sun, Ming; Ye, Fei; Lan, Bang; Diao, Guiqiang; He, Jun

    2013-02-15

    Well-ordered organic-inorganic hybrid layered manganese oxide nanocomposites (CTAB-Al-MO) with excellent decolorization performance were prepared through a two-step process. Specifically, the MnO{sub 2} nanosheets were self-assembled in the presence of CTAB, and subsequently pillared with Keggin ions. The obtained CTAB-Al-MO with the basal spacing of 1.59 nm could be stable at 300 Degree-Sign C for 2 h and also possesses high total pore volumes (0.41 cm Superscript-Three g{sup -1}) and high specific BET surface area (161 m{sup 2} g{sup -1}), which is nine times larger than that of the pristine (19 m{sup 2} g{sup -1}). Possible formation process for the highly thermal stable CTAB-Al-MO is proposed here. The decolorization experiments of methyl orange showed that the obtained CTAB-Al-MO exhibit excellent performance in wastewater treatment and the decolorization rate could reach 95% within 5 min. - Graphical Abstract: Well-ordered organic-inorganic hybrid LMO nanocomposites (CTAB-Al-MO) with excellent decolorization performance were prepared through a two-step process. Specifically, the MnO{sub 2} nanosheets were self-assembled by CTAB, and subsequently pillared with Keggin ions. Highlights: Black-Right-Pointing-Pointer A two-step synthesis method was used to prepare the CTAB-Al-MO. Black-Right-Pointing-Pointer The CTAB-Al-MO has the large basal spacing and high specific BET surface area. Black-Right-Pointing-Pointer The thermal stability of the well-ordered CTAB-Al-MO could obviously improve. Black-Right-Pointing-Pointer The CTAB-Al-MO exhibits excellent oxidation and absorption ability to remove organic pollutants.

  3. Embedded Metal Electrode for Organic-Inorganic Hybrid Nanowire Solar Cells.

    PubMed

    Um, Han-Don; Choi, Deokjae; Choi, Ahreum; Seo, Ji Hoon; Seo, Kwanyong

    2017-06-27

    We demonstrate here an embedded metal electrode for highly efficient organic-inorganic hybrid nanowire solar cells. The electrode proposed here is an effective alternative to the conventional bus and finger electrode which leads to a localized short circuit at a direct Si/metal contact and has a poor collection efficiency due to a nonoptimized electrode design. In our design, a Ag/SiO2 electrode is embedded into a Si substrate while being positioned between Si nanowire arrays underneath poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), facilitating suppressed recombination at the Si/Ag interface and notable improvements in the fabrication reproducibility. With an optimized microgrid electrode, our 1 cm(2) hybrid solar cells exhibit a power conversion efficiency of up to 16.1% with an open-circuit voltage of 607 mV and a short circuit current density of 34.0 mA/cm(2). This power conversion efficiency is more than twice as high as that of solar cells using a conventional electrode (8.0%). The microgrid electrode significantly minimizes the optical and electrical losses. This reproducibly yields a superior quantum efficiency of 99% at the main solar spectrum wavelength of 600 nm. In particular, our solar cells exhibit a significant increase in the fill factor of 78.3% compared to that of a conventional electrode (61.4%); this is because of the drastic reduction in the metal/contact resistance of the 1 μm-thick Ag electrode. Hence, the use of our embedded microgrid electrode in the construction of an ideal carrier collection path presents an opportunity in the development of highly efficient organic-inorganic hybrid solar cells.

  4. Controlled formation of calcium-phosphate-based hybrid mesocrystals by organic-inorganic co-assembly.

    PubMed

    Zhai, Halei; Chu, Xiaobin; Li, Li; Xu, Xurong; Tang, Ruikang

    2010-11-01

    An understanding of controlled formation of biomimetic mesocrystals is of great importance in materials chemistry and engineering. Here we report that organic-inorganic hybrid plates and even mesocrystals can be conveniently synthesized using a one-pot reaction in a mixed system of protein (bovine serum albumin (BSA)), surfactant (sodium bis(2-ethylhexyl) sulfosuccinate (AOT)) and supersaturated calcium phosphate solution. The morphologies of calcium-phosphate-based products are analogous to the general inorganic crystals but they have abnormal and interesting substructures. The hybrids are constructed by the alternate stacking of organic layer (thickness of 1.31 nm) and well-crystallized inorganic mineral layer (thickness of 2.13 nm) at the nanoscale. Their morphologies (spindle, rhomboid and round) and sizes (200 nm-2 μm) can be tuned gradually by changing BSA, AOT and calcium phosphate concentrations. This modulation effect can be explained by a competition between the anisotropic and isotropic assembly of the ultrathin plate-like units. The anisotropic assembly confers mesocrystal characteristics on the hybrids while the round ones are the results of isotropic assembly. However, the basic lamellar organic-inorganic substructure remains unchanged during the hybrid formation, which is a key factor to ensure the self-assembly from molecule to micrometre scale. A morphological ternary diagram of BSA-AOT-calcium phosphate is used to describe this controlled formation process, providing a feasible strategy to prepare the required materials. This study highlights the cooperative effect of macromolecule (frame structure), small biomolecule (binding sites) and mineral phase (main component) on the generation and regulation of biomimetic hybrid mesocrystals.

  5. Controlled formation of calcium-phosphate-based hybrid mesocrystals by organic-inorganic co-assembly

    NASA Astrophysics Data System (ADS)

    Zhai, Halei; Chu, Xiaobin; Li, Li; Xu, Xurong; Tang, Ruikang

    2010-11-01

    An understanding of controlled formation of biomimetic mesocrystals is of great importance in materials chemistry and engineering. Here we report that organic-inorganic hybrid plates and even mesocrystals can be conveniently synthesized using a one-pot reaction in a mixed system of protein (bovine serum albumin (BSA)), surfactant (sodium bis(2-ethylhexyl) sulfosuccinate (AOT)) and supersaturated calcium phosphate solution. The morphologies of calcium-phosphate-based products are analogous to the general inorganic crystals but they have abnormal and interesting substructures. The hybrids are constructed by the alternate stacking of organic layer (thickness of 1.31 nm) and well-crystallized inorganic mineral layer (thickness of 2.13 nm) at the nanoscale. Their morphologies (spindle, rhomboid and round) and sizes (200 nm-2 μm) can be tuned gradually by changing BSA, AOT and calcium phosphate concentrations. This modulation effect can be explained by a competition between the anisotropic and isotropic assembly of the ultrathin plate-like units. The anisotropic assembly confers mesocrystal characteristics on the hybrids while the round ones are the results of isotropic assembly. However, the basic lamellar organic-inorganic substructure remains unchanged during the hybrid formation, which is a key factor to ensure the self-assembly from molecule to micrometre scale. A morphological ternary diagram of BSA-AOT-calcium phosphate is used to describe this controlled formation process, providing a feasible strategy to prepare the required materials. This study highlights the cooperative effect of macromolecule (frame structure), small biomolecule (binding sites) and mineral phase (main component) on the generation and regulation of biomimetic hybrid mesocrystals.

  6. Multi-Functional Composite Fatigue

    NASA Technical Reports Server (NTRS)

    Minnetyan, Levon; Chamis, Christos C.

    2008-01-01

    Damage and fracture of composites subjected to monotonically increasing static, tension-tension cyclic, pressurization, and flexural cyclic loading are evaluated via a recently developed composite mechanics code that allows the user to focus on composite response at infinitely small scales. Constituent material properties, stress and strain limits are scaled up to the laminate level to evaluate the overall damage and durability. Results show the number of cycles to failure at different temperatures. A procedure is outlined for use of computational simulation data in the assessment of damage tolerance, determination of sensitive parameters affecting fracture, and interpretation of results with insight for design decisions.

  7. Organic-inorganic interactions in the system of pyrrole-hematite-water at elevated temperatures and pressures

    NASA Astrophysics Data System (ADS)

    Ding, Kangle

    2015-11-01

    The distribution and abundance of pyrrolic compounds in sediments and crude oils are most likely influenced by inorganic sedimentary components. In this paper, thermal simulation experiments on the system pyrrole-hematite-water were carried out at elevated temperatures and pressures in order to investigate the effect of organic-inorganic interactions on the preservation of pyrrolic compounds. Compositions of the reaction products were analyzed with GC-MS and GC-FID methods. In the closed system pyrrole-hematite-water, the nitrogen-oxygen exchange obviously occurred at temperatures above 350ºC in accordance with the thermochemical calculation. Large amounts of furan and ammonia were generated after simulation experiments, indicating that the conversion of pyrrole into furan was the dominant reaction. Thermochemical exchange effect between organic nitrogen and inorganic oxygen was obviously facilitated by elevated temperatures and found to be catalyzed by hematite, but inhibited by the increasing volume of water. Thermodynamically water spontaneously reacts with pyrrole above 300ºC. The reaction of pyrrole-hematite-water is an exothermic process in which the reaction heat positively correlates with temperature. The heat released was estimated as 9.0 KJ/(mol) pyrrole - 15.0 KJ/(mol) pyrrole in typical oil reservoirs (100ºC-150ºC) and 15.0-23.0 KJ/(mol) pyrrole in typical gas reservoirs (150ºC-200ºC). The calculated activation energy of the nitrogen-oxygen atom exchange is about 129.59 kJ/mol. According to the experimental results, a small amount of water may effectively initiate the nitrogen-oxygen exchange. The study would improve our evaluating of the preservation and fate of pyrrolic compounds in deeply buried geologic settings and further understanding of thermochemical processes behind the degradation of petroleum.

  8. Organic-inorganic interactions at oil-water contacts: quantitative retracing of processes controlling the CO2 occurrence in Norwegian oil reservoirs

    NASA Astrophysics Data System (ADS)

    van Berk, Wolfgang; Schulz, Hans-Martin

    2010-05-01

    Crude oil quality in reservoirs can be modified by degradation processes at oil-water contacts (OWC). Mineral phase assemblages, composition of coexisting pore water, and type and amount of hydrocarbon degradation products (HDP) are controlling factors in complex hydrogeochemical processes in hydrocarbon-bearing siliciclastic reservoirs, which have undergone different degrees of biodegradation. Moreover, the composition of coexisting gas (particularly CO2 partial pressure) results from different pathways of hydrogeochemical equilibration. In a first step we analysed recent and palaeo-OWCs in the Heidrun field. Anaerobic decomposition of oil components at the OWC resulted in the release of methane and carbon dioxide and subsequent dissolution of feldspars (anorthite and adularia) leading to the formation of secondary kaolinite and carbonate phases. Less intensively degraded hydrocarbons co-occur with calcite, whereas strongly degraded hydrocarbons co-occur with solid solution carbonate phase (siderite, magnesite, calcite) enriched in δ13C. To test such processes quantitatively in a second step, CO2 equilibria and mass transfers induced by organic-inorganic interactions have been hydrogeochemically modelled in different semi-generic scenarios with data from the Norwegian continental shelf (acc. Smith & Ehrenberg 1989). The model is based on chemical thermodynamics and includes irreversible reactions representing hydrolytic disproportionation of hydrocarbons according to Seewald's (2006) overall reaction (1a) which is additionally applied in our modelling work in an extended form including acetic acid (1b): (1) R-CH2-CH2-CH3 + 4H2O -> R + 2CO2 + CH4 + 5H2, (2) R-CH2-CH2-CH3 + 4H2O -> R + 1.9CO2 + 0.1CH3COOH + 0.9CH4 + 5H2. Equilibrating mineral assemblages (different feldspar types, quartz, kaolinite, calcite) are based on the observed primary reservoir composition at 72 °C. Modelled equilibration and coupled mass transfer were triggered by the addition and reaction

  9. Functionalized Nano and Micro Structured Composite Coatings

    DTIC Science & Technology

    2011-06-01

    AFRL-RX-TY-TR-2011-0069 FUNCTIONALIZED NANO AND MICRO STRUCTURED COMPOSITE COATINGS (FINAL REPORT) Igor Luzinov and Konstantin Kornev...Technical Report 21-MAY-2009 -- 31-MAY-2011 Functional Polymeric Materials - from Research Labs to Field Applications: Functionalized Nano and Micro ...work was to conduct research on development of effective nano and micro structured composite coatings capable to collect and decontaminate the

  10. Reactivity I: A Foundation-Level Course for Both Majors and Nonmajors in Integrated Organic, Inorganic, and Biochemistry

    ERIC Educational Resources Information Center

    Schaller, Chris P.; Graham, Kate J.; Johnson, Brian J.; Jones, T. Nicholas; McIntee, Edward J.

    2015-01-01

    A foundation level course is presented that integrates aspects of organic, inorganic and biochemistry in the context of reactivity. The course was designed to serve majors in chemistry and other sciences (biochemistry, biology, nutrition), as well as nursing and pre-health professions students. Themes of the course were designed to highlight a…

  11. Reactivity I: A Foundation-Level Course for Both Majors and Nonmajors in Integrated Organic, Inorganic, and Biochemistry

    ERIC Educational Resources Information Center

    Schaller, Chris P.; Graham, Kate J.; Johnson, Brian J.; Jones, T. Nicholas; McIntee, Edward J.

    2015-01-01

    A foundation level course is presented that integrates aspects of organic, inorganic and biochemistry in the context of reactivity. The course was designed to serve majors in chemistry and other sciences (biochemistry, biology, nutrition), as well as nursing and pre-health professions students. Themes of the course were designed to highlight a…

  12. Multi-scale Properties and Processes in Hierarchically-Structured Organic-Inorganic Solids and Surface-Based Microfluidic Systems

    NASA Astrophysics Data System (ADS)

    Messinger, Robert James

    Hierarchically-structured materials and surface-based microfluidic systems exhibit diverse properties that are inherently multi-scale in origin. In particular, different molecular, mesoscopic, and micron-scale properties and processes are often correlated and collectively account for many properties of interest, such as bulk catalytic activities or electrokinetic flow rates. However, such properties and processes often exhibit complex relationships over the different length scales that are not well understood, and consequently, difficult to control. Establishing correlations between them has been challenging, in part due to the difficulty of rigorously characterizing complex, heterogeneous materials and surface-based microfluidic experiments over multiple length scales, particularly at the molecular and mesoscopic levels. Herein, new multi-scale understanding and correlations have been established for different hierarchically-structured organic-inorganic solids or surface-based microfluidic systems, enabling control of material or device properties over discrete length scales. The molecular-level compositions, structures, interactions, and dynamics have been measured in diverse hierarchically-structured materials, such as mesostructured zeolites, mesostructured organosilicas, and organosiloxane foams, and subsequently correlated with their meso- and macroscopic material structures and properties. The results reveal new insights on the molecular-level interactions that govern their syntheses, the resulting local compositions and material structures, and the relationships among material properties over multiple characteristic length scales. Multi-dimensional solid-state nuclear magnetic resonance (NMR) spectroscopy is a cornerstone of these investigations, which enables correlative measurements in multiple frequency dimensions of the through-space or through-bond interactions between the constituent nuclei within the different materials. Other multi

  13. Efficiency enhancement in solution processed organic and organic-inorganic perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Xiao, Zhengguo

    Solution processed thin film photovoltaic devices are one of the most promising renewable energy sources. Organic solar cells have been intensively studied due to their advantages of light-weight, flexibility and low-cost materials and manufacturing. The organic-inorganic hybrid perovskite materials have recently shown great potential application in solar cells. The PCE increased dramatically from 3.8% in 2009 to a certified efficiency of 20.1% in 2014. In this dissertation, we focus on the efficiency enhancement for solution processed organic and organic-inorganic solar cells. In Chapter 2, I demonstrated that the crystallinity of the ferroelectric polymer P(VDF-TrFE) at the organic active layer/ electrode interface plays a critical role in the efficiency enhancement of organic solar cells. Then, The ferroelectric P(VDF-TrFE) nanocrystals was synthesized and successfully applied in the low band gap polymers. A high efficiency of 6.8% was achieved in the PCDTBT:PCBM system. Another small polar molecule, TPACA, was also applied to increase the efficiency of organic solar cells. In Chapter 3, I developed a universal approach of solvent fluxing to fabricate graded bulk heterojunction (BHJ) polymer:fullerene films to increase the device efficiency. The solvent fluxing process can extract part of the fullerene inside the BHJ film to the top surface to form graded BHJ. The PCE of the devices after solvent fluxing is increased by 15%--50% compared with the control devices without solvent fluxing. In Chapter 5, a two-step spin coating approach was developed to fabricate the continuous and compact organolead trihalide perovskite (OTP) films. The average PCE of methylammonium lead iodide (MAPbI3) perovskite devices reached 14.5% and 85% of the devices had efficiency above 14%. In Chapter 6, I discovered that the solvent annealing can be used to increase the grain size and crystallinity of the perovskite films. The highest device efficiency reached 15.6%, and device

  14. Multi-functional composite structures

    DOEpatents

    Mulligan, Anthony C.; Halloran, John; Popovich, Dragan; Rigali, Mark J.; Sutaria, Manish P.; Vaidyanathan, K. Ranji; Fulcher, Michael L.; Knittel, Kenneth L.

    2010-04-27

    Fibrous monolith processing techniques to fabricate multifunctional structures capable of performing more than one discrete function such as structures capable of bearing structural loads and mechanical stresses in service and also capable of performing at least one additional non-structural function.

  15. Multi-functional composite structures

    DOEpatents

    Mulligan, Anthony C.; Halloran, John; Popovich, Dragan; Rigali, Mark J.; Sutaria, Manish P.; Vaidyanathan, K. Ranji; Fulcher, Michael L.; Knittel, Kenneth L.

    2004-10-19

    Fibrous monolith processing techniques to fabricate multifunctional structures capable of performing more than one discrete function such as structures capable of bearing structural loads and mechanical stresses in service and also capable of performing at least one additional non-structural function.

  16. Synthesis of hybrid organic-inorganic nanocomposite materials based on CdS nanocrystals for energy conversion applications

    NASA Astrophysics Data System (ADS)

    Laera, A. M.; Resta, V.; Ferrara, M. C.; Schioppa, M.; Piscopiello, E.; Tapfer, L.

    2011-11-01

    Efficient solar energy conversion is strongly related to the development of new materials with enhanced functional properties. In this context, a wide variety of inorganic, organic, or hybrid nanostructured materials have been investigated. In particular, in hybrid organic-inorganic nanocomposites are combined the convenient properties of organic polymers, such as easy manipulation and mechanical flexibility, and the unique size-dependent properties of nanocrystals (NCs). However, applications of hybrid nanocomposites in photovoltaic devices require a homogeneous and highly dense dispersion of NCs in polymer in order to guarantee not only an efficient charge separation, but also an efficient transport of the carriers to the electrodes without recombination. In previous works, we demonstrated that cadmium thiolate complexes are suitable precursors for the in situ synthesis of nanocrystalline CdS. Here, we show that the soluble [Cd(SBz)2]2·(1-methyl imidazole) complex can be efficiently annealed in a conjugated polymer obtaining a nanocomposite with a regular and compact network of NCs. The proposed synthetic strategies require annealing temperatures well below 200 °C and short time for the thermal treatment, i.e., less than 30 min. We also show that the same complex can be used to synthesize CdS NCs in mesoporous TiO2. The adsorption of cadmium thiolate molecule in TiO2 matrix can be obtained by using chemical bath deposition technique and subsequent thermal annealing. The use of NCs, quantum dots, as sensitizers of TiO2 matrices represents a very promising alternative to common dye-sensitized solar cells and an interesting solution for heterogeneous photocatalysis.

  17. Synthesis of a novel organic-inorganic hybrid of polyaniline/titanium phosphate for Re(VII) removal.

    PubMed

    Gao, Yang; Chen, Changlun; Chen, He; Zhang, Rui; Wang, Xiangke

    2015-05-21

    The organic-inorganic hybrid material of polyaniline/titanium(IV) (PANI/Ti(HPO4)2) was synthesized by an oxidative polymerization reaction. The PANI/Ti(HPO4)2 was applied to remove Re(VII). The size of Ti(HPO4)2 nanoplates has no obvious effect on the sorption capacity. The effects of various environmental factors (such as pH, extra anions (NO3(-) and MO4(2-)) and temperature) on Re(VII) sorption to PANI/Ti(HPO4)2 were investigated by batch experiments. The sorption kinetics followed a pseudo-second-order model. The nitrogen-containing functional groups of PANI promoted Re(VII) sorption. The PANI/Ti(HPO4)2 exhibited excellent maximum sorption capacity to Re(VII) (47.62 mg g(-1)), which was superior to that of PANI (10.75 mg g(-1)) and much higher than that of many other sorbents. The sorption isotherms of Re(VII) can be well fitted with the Langmuir model. Re(VII) sorption decreased with increasing solution pH at pH > 4.0, which implied that Re(VII) sorption on PANI/Ti(HPO4)2 might be attributed to the outer-sphere complexation between amine and imine groups on the surface of PANI/Ti(HPO4)2 and Re(VII). This study implies that the hybrid material of PANI/Ti(HPO4)2 can be regarded as a potential sorbent to remove Re(VII) and its analogues from large volumes of aqueous solutions.

  18. Uremia Alters HDL Composition and Function

    PubMed Central

    Holzer, Michael; Birner-Gruenberger, Ruth; Stojakovic, Tatjana; El-Gamal, Dalia; Binder, Veronika; Wadsack, Christian; Heinemann, Akos

    2011-01-01

    Functional impairment of HDL may contribute to the excess cardiovascular mortality experienced by patients with renal disease, but the effect of advanced renal disease on the composition and function of HDL is not well understood. Here, we used mass spectrometry and biochemical analyses to study alterations in the proteome and lipid composition of HDL isolated from patients on maintenance hemodialysis. We identified a significant increase in the amount of acute phase protein serum amyloid A1, albumin, lipoprotein-associated phospholipase A2, and apoC-III composing uremic HDL. Furthermore, uremic HDL contained reduced phospholipid and increased triglyceride and lysophospholipid. With regard to function, these changes impaired the ability of uremic HDL to promote cholesterol efflux from macrophages. In summary, the altered composition of HDL in renal disease seems to inhibit its cardioprotective properties. Assessing HDL composition and function in renal disease may help identify patients at increased risk for cardiovascular disease. PMID:21804091

  19. Effect of halide-mixing on the switching behaviors of organic-inorganic hybrid perovskite memory

    NASA Astrophysics Data System (ADS)

    Hwang, Bohee; Gu, Chungwan; Lee, Donghwa; Lee, Jang-Sik

    2017-03-01

    Mixed halide perovskite materials are actively researched for solar cells with high efficiency. Their hysteresis which originates from the movement of defects make perovskite a candidate for resistive switching memory devices. We demonstrate the resistive switching device based on mixed-halide organic-inorganic hybrid perovskite CH3NH3PbI3-xBrx (x = 0, 1, 2, 3). Solvent engineering is used to deposit the homogeneous CH3NH3PbI3-xBrx layer on the indium-tin oxide-coated glass substrates. The memory device based on CH3NH3PbI3-xBrx exhibits write endurance and long retention, which indicate reproducible and reliable memory properties. According to the increase in Br contents in CH3NH3PbI3-xBrx the set electric field required to make the device from low resistance state to high resistance state decreases. This result is in accord with the theoretical calculation of migration barriers, that is the barrier to ionic migration in perovskites is found to be lower for Br- (0.23 eV) than for I- (0.29-0.30 eV). The resistive switching may be the result of halide vacancy defects and formation of conductive filaments under electric field in the mixed perovskite layer. It is observed that enhancement in operating voltage can be achieved by controlling the halide contents in the film.

  20. Photoluminescence Mechanism and Photocatalytic Activity of Organic-Inorganic Hybrid Materials Formed by Sequential Vapor Infiltration.

    PubMed

    Akyildiz, Halil I; Stano, Kelly L; Roberts, Adam T; Everitt, Henry O; Jur, Jesse S

    2016-05-03

    Organic-inorganic hybrid materials formed by sequential vapor infiltration (SVI) of trimethylaluminum into polyester fibers are demonstrated, and the photoluminescence of the fibers is evaluated using a combined UV-vis and photoluminescence excitation (PLE) spectroscopy approach. The optical activity of the modified fibers depends on infiltration thermal processing conditions and is attributed to the reaction mechanisms taking place at different temperatures. At low temperatures a single excitation band and dual emission bands are observed, while, at high temperatures, two distinct absorption bands and one emission band are observed, suggesting that the physical and chemical structure of the resulting hybrid material depends on the SVI temperature. Along with enhancing the photoluminescence intensity of the PET fibers, the internal quantum efficiency also increased to 5-fold from ∼4-5% to ∼24%. SVI processing also improved the photocatalytic activity of the fibers, as demonstrated by photodeposition of Ag and Au metal particles out of an aqueous metal salt solution onto fiber surfaces via UVA light exposure. Toward applications in flexible electronics, well-defined patterning of the metallic materials is achieved by using light masking and focused laser rastering approaches.

  1. Ordered Layered Organic-Inorganic of 4-Chlorophenoxyacetate-Zinc Layered Hydroxide Nanohybrid

    SciTech Connect

    Hussein, Mohd Zobir; Nazarudin, Nor Farhana binti; Sarijo, Siti Halimah; Yarmo, Mohd Ambar

    2011-03-30

    Ordered layered organic-inorganic nanostructure composed of zinc layered hydroxide-4-chlorophenoxy acetate (ZLH-4CPA) was prepared by reaction of an organic anion, 4-chlorophenoxy acetate (4CPA) with ZnO under aqueous environment. The concentration of 4CPA was found to be a controlling factor in determining the formation of phase pure, well ordered nanolayered hybrid material. At lower concentration of 4CPA (0.05 M), a mixed phase was observed in which ZnO co-existed with the nanohybrid. At 0.01 M, a pure phase is obtained with high crystallinity but a well ordered nanolayered structure is lacking. A pure phase, well ordered nanolayered hybrid can be clearly observed at 0.2 M 4CPA. ZnO shows well defined grain structure of various sizes at nanometer scale range. Direct reaction between ZnO and 4CPA under aqueous environment resulted in the formation of 4CPA-ZLH nanohybrid with flake-like fibrous structure. On heating at 500 deg. C for 5 h under atmospheric condition, the nanohybrid was transformed back to well defined grain structure, as previously observed for the starting materials, ZnO. This shows that the nanohybrid has ''memory effect'' property. Well ordered nanolayered hybrid with up to 5 harmonics, from which the average basal spacing of 19.03 A of the material was deduced, showing long range order of the layer packing.

  2. 'Green' biocompatible organic-inorganic hybrid electrospun nanofibers for potential biomedical applications.

    PubMed

    Manjumeena, R; Elakkiya, T; Duraibabu, D; Feroze Ahamed, A; Kalaichelvan, P T; Venkatesan, R

    2015-02-01

    Gold nanoparticles were prepared by green route using Couroupita guianensis leaves extract. The green synthesized gold nanoparticles exhibited maximum absorbance at 526 nm in the ultraviolet spectrum. By incorporating the green synthesized gold nanoparticles in poly(vinyl alcohol) matrix, unique green organic-inorganic hybrid nanofibers (poly (vinyl alcohol : )-gold nanoparticles) were developed by electrospinning. Contact angle measurements showed that the prepared poly (vinyl alcohol)-gold nanoparticles were found to be highly hydrophilic. The crystallinity of gold nanoparticles was analyzed using XRD. The synthesized gold nanoparticles and poly (vinyl alcohol)-gold nanoparticles were characterized using high-resolution transmission electron microscope, Fourier transform-infrared spectroscopy and energy-dispersive analysis of X-ray. The ultimate aim of the present work is to achieve optimum antibacterial, antifungal, biocompatibility and antiproliferative activities at a very low loading of gold nanoparticles. Vero cell lines showed a maximum of 90% cell viability on incubation with the prepared poly (vinyl alcohol)-gold nanoparticles. MCF 7 and HeLa cell lines proliferated only to 8% and 9%, respectively, on incubation with the poly (vinyl alcohol)-gold nanoparticles, and also exhibited good antibacterial and antifungal activities against test pathogenic bacterial and fungal strains. Thus, the poly (vinyl alcohol)-gold nanoparticles could be used for dual applications such as antimicrobial, anticancer treatment besides being highly biocompatible. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  3. [Development and evaluation of fertilizers cemented and coated with organic-inorganic materials].

    PubMed

    Xiao, Qiang; Wang, Jia-Chen; Zuo, Qiang; Zhang, Lin; Liu, Bao-Cun; Zhao, Tong-Ke; Zou, Guo-Yuan; Xu, Qiu-Ming

    2010-01-01

    Four kinds of organic-inorganic cementing and coating materials were prepared by a coating method using water as the solvent, and the corresponding cemented and coated fertilizers (B2, PS, F2, and F2F) were produced by disc pelletizer. The tests on the properties of these fertilizers showed that the granulation rate, compression strength, and film-forming rate were B2 > PS > F2 > F2F. Soil column leaching experiment showed that the curve of accumulated nitrogen-dissolving rate was the gentlest for B2. In 48 days, the accumulated nitrogen-dissolving rate was in the order of B2, 54.65% < PS, 56.16% < F2, 59.47%, < F2F, 63.12%. Field experiment showed that compared with the same application amount of NPK, all the test fertilizers had better effects on corn yield, among which, B2 was the best, with the corn yield and fertilizer use efficiency increased by 19.72% and 20.30%, respectively. The yield-increasing effect of other test fertilizers was in the order of PS > F2 > F2F.

  4. In situ formation of organic-inorganic hybrid nanostructures for photovoltaic applications.

    PubMed

    Wood, Sebastian; Garnett, Oliver; Tokmoldin, Nurlan; Tsoi, Wing C; Haque, Saif A; Kim, Ji-Seon

    2014-01-01

    The performance of hybrid (organic-inorganic) photovoltaic devices is critically dependent on the thin film morphology. This work studies the film formation process using the in situ thermal decomposition of a soluble precursor to form a well-distributed network of CdS nanoparticles within a poly(3-hexylthiophene) (P3HT) polymer matrix. Resonant Raman spectroscopy is used to probe the formation of the inorganic nanoparticles and the corresponding changes in the molecular order of the polymer. We find that the CdS precursor decomposes rapidly upon heating to 160 °C, but that this has a disruptive effect on the P3HT. The extent of this disruption can be controlled by adjusting the annealing temperature, and nanowire aggregates of P3HT are found to have increased susceptibility. Atomic force microscopy reveals that at high temperatures (>200 °C), cracks form in the film, resulting in a 'plateau'-like microstructure. In order to retain the preferable 'granular' microstructure and to control the molecular disruption, low decomposition temperatures are needed. This work identifies a particular problem for optimising the hybrid thin film morphology and shows how it can be partially overcome.

  5. Synthesis and characterization of four organic-inorganic salts: sulfates of 2-aminopyridinium derivatives.

    PubMed

    Bednarchuk, Tamara J; Kinzhybalo, Vasyl; Pietraszko, Adam

    2016-11-01

    Hybrid materials, fabricated by the combination of inorganic and organic components, have potential applications in chemistry and are endowed with the advantages of both building elements. There are several types of intermolecular interactions present in these hybrid compounds, including electrostatic forces, π-π stacking and hydrogen-bonding interactions, the latter playing an important role in the construction of three-dimensional architectures and stabilizing supramolecular crystal structures. Analysis of the intermolecular interactions and their influence on packing modes therefore requires focused scientific attention. Four new organic-inorganic salts, namely 2-amino-4-methyl-3-nitropyridinium hydrogen sulfate, C6H8N3O2(+)·HSO4(-), bis(2-amino-4-methyl-3-nitropyridinium) sulfate, 2C6H8N3O2(+)·SO4(2-), 2-amino-3-methylpyridinium hydrogen sulfate, C6H9N2(+)·HSO4(-), and bis(2-amino-3-methylpyridinium) sulfate monohydrate, 2C6H9N2(+)·SO4(2-)·H2O, have been synthesized and characterized by X-ray diffraction. The crystal structures are stabilized by intra- and intermolecular hydrogen bonds, as well as by weak π-π stacking and lp-π (lp is lone pair) interactions. Hirshfeld surface analysis was employed in order to study intermolecular interactions.

  6. Enhanced power efficiency of ZnO based organic/inorganic solar cells by surface modification

    NASA Astrophysics Data System (ADS)

    Tang, Shuangshuang; Tang, Ning; Meng, Xiuqing; Huang, Shihua; Hao, Yafei

    2016-09-01

    We present series of strategies to enhance efficiency of ZnO nanorods based organic/inorganic solar cells with spin-coated P3HT:PCBM blend as active layer. The performance of the as-fabricated devices is improved by controlling the size of ZnO nanorods, annealing temperature and time of active layer, surface modification of ZnO with PSBTBT. Optimized device of ITO/ZnO nanorod/P3HT:PCBM/Ag device with PSBTBT surface modification and air exposure reaches an efficiency of 2.02% with a short-circuit current density, open-circuit voltage and fill factor of 13.23 mA cm-2, 0.547 V and 28%, respectively, under AM 1.5 irradiation of 100 mW m-2, the increase in efficiency is 7-fold of the PSBTBT surface modified ITO/ZnO nanorods/P3HT:PCBM/Ag device compared with the unmodified one, which is own to the increased interface contact, expanded light absorption, tailored band alignment attributed to PSBTBT. We found exposure to air and surface modification is crucial to improve the device performance, and we discussed the mechanisms that affect the performance of the devices in detail.

  7. Flexible single-layer ionic organic-inorganic frameworks towards precise nano-size separation

    NASA Astrophysics Data System (ADS)

    Yue, Liang; Wang, Shan; Zhou, Ding; Zhang, Hao; Li, Bao; Wu, Lixin

    2016-02-01

    Consecutive two-dimensional frameworks comprised of molecular or cluster building blocks in large area represent ideal candidates for membranes sieving molecules and nano-objects, but challenges still remain in methodology and practical preparation. Here we exploit a new strategy to build soft single-layer ionic organic-inorganic frameworks via electrostatic interaction without preferential binding direction in water. Upon consideration of steric effect and additional interaction, polyanionic clusters as connection nodes and cationic pseudorotaxanes acting as bridging monomers connect with each other to form a single-layer ionic self-assembled framework with 1.4 nm layer thickness. Such soft supramolecular polymer frameworks possess uniform and adjustable ortho-tetragonal nanoporous structure in pore size of 3.4-4.1 nm and exhibit greatly convenient solution processability. The stable membranes maintaining uniform porous structure demonstrate precisely size-selective separation of semiconductor quantum dots within 0.1 nm of accuracy and may hold promise for practical applications in selective transport, molecular separation and dialysis systems.

  8. Influence of TiO2 nanostructures on the optical absorption of organic-inorganic perovskite

    NASA Astrophysics Data System (ADS)

    Liu, Zongyi; Ye, Mao; Ostrowski, Michel; Yi, Ya Sha

    2016-04-01

    This work aims to reveal the strong influence of TiO2 nanostructures on the light absorption property of TiO2 and perovskite mixture. Three TiO2 nanostructures, i.e., nanoparticles (S1), ultrapure nanorods (S2), and ultrasmall nanorods (S3), were studied: S1 was selected as a baseline; S2 and S3 were synthesized from S1 by using modified hydrothermal processes. Mesoporous TiO2 thin films were spin-coated from solutions containing these TiO2 nanorods and nanoparticles (S1 as baseline). Organic-inorganic hybrid perovskite CH3NH3PbI3 was then incorporated into these mesoporous TiO2 thin films. Optical absorption results showed that the perovskite mixture with ultrasmall TiO2 nanostructures (S3) has significantly higher optical absorption coefficient. Finite-difference time domain models were built based on three distinct nanostructures of TiO2 and CH3NH3PbI3 mixtures fabricated (S1 to S3) to understand their optical absorption properties. Our work is promising to fabricate TiO2 nanostructures, as a backbone structure, for a series of applications including photovoltaics and photodetection.

  9. Organic/inorganic interfaced field-effect transistor properties with a novel organic semiconducting material

    NASA Astrophysics Data System (ADS)

    Demir, Ahmet; Atahan, Alparslan; Bağcı, Sadık; Aslan, Metin; Saif Islam, M.

    2016-01-01

    A novel 1,3,4-oxadiazole-substituted benzo[b]triphenylene was synthesized by three-step synthetic procedure and OFET device design was successfully designed after theoretical calculations made using Gaussian software. For investigating the field-effect properties of designed organic electronic device, a SiO2 (300 nm) was thermally grown on p-Si wafer at 1000 °C as a dielectric layer and gate, source and drain contacts have been deposited using Au metal with physical vapour deposition. 1,3,4-Oxadiazole-substituted benzo[b]triphenylene was spin coated on the source and drain electrodes of our device, forming organic/inorganic interfaced field-effect transistors. Surface morphology and thin film properties were investigated using AFM. All electrical measurements were done in air ambient. The device showed a typical p-type channel behaviour with increasing negative gate bias voltage values. Our results have surprisingly shown that the saturation regime of this device has high mobility (μFET), excellent on/off ratio (Ion/Ioff), high transconductance (gm) and a small threshold voltage (VTh). The values of μFET, Ion/Ioff, gm and VTh were found as 5.02 cm2/Vs, 0.7 × 103, 5.64 μS/mm and 1.37 V, respectively. These values show that our novel organic material could be a potential candidate for organic electronic device applications in the future.

  10. Spin-polarized exciton quantum beating in hybrid organic-inorganic perovskites

    NASA Astrophysics Data System (ADS)

    Odenthal, Patrick; Talmadge, William; Gundlach, Nathan; Wang, Ruizhi; Zhang, Chuang; Sun, Dali; Yu, Zhi-Gang; Valy Vardeny, Z.; Li, Yan S.

    2017-09-01

    Hybrid organic-inorganic perovskites have emerged as a new class of semiconductors that exhibit excellent performance as active layers in photovoltaic solar cells. These compounds are also highly promising materials for the field of spintronics due to their large and tunable spin-orbit coupling, spin-dependent optical selection rules, and their predicted electrically tunable Rashba spin splitting. Here we demonstrate the optical orientation of excitons and optical detection of spin-polarized exciton quantum beating in polycrystalline films of the hybrid perovskite CH3NH3PbClxI3-x. Time-resolved Faraday rotation measurement in zero magnetic field reveals unexpectedly long spin lifetimes exceeding 1 ns at 4 K, despite the large spin-orbit couplings of the heavy lead and iodine atoms. The quantum beating of exciton states in transverse magnetic fields shows two distinct frequencies, corresponding to two g-factors of 2.63 and -0.33, which we assign to electrons and holes, respectively. These results provide a basic picture of the exciton states in hybrid perovskites, and suggest they hold potential for spintronic applications.

  11. Lead-free Organic-Inorganic Hybrid Perovskites for Photovoltaic Applications: Recent Advances and Perspectives.

    PubMed

    Shi, Zejiao; Guo, Jia; Chen, Yonghua; Li, Qi; Pan, Yufeng; Zhang, Haijuan; Xia, Yingdong; Huang, Wei

    2017-02-03

    Organic-inorganic hybrid halide perovskites (e.g., MAPbI3 ) have recently emerged as novel active materials for photovoltaic applications with power conversion efficiency over 22%. Conventional perovskite solar cells (PSCs); however, suffer the issue that lead is toxic to the environment and organisms for a long time and is hard to excrete from the body. Therefore, it is imperative to find environmentally-friendly metal ions to replace lead for the further development of PSCs. Previous work has demonstrated that Sn, Ge, Cu, Bi, and Sb ions could be used as alternative ions in perovskite configurations to form a new environmentally-friendly lead-free perovskite structure. Here, we review recent progress on lead-free PSCs in terms of the theoretical insight and experimental explorations of the crystal structure of lead-free perovskite, thin film deposition, and device performance. We also discuss the importance of obtaining further understanding of the fundamental properties of lead-free hybrid perovskites, especially those related to photophysics.

  12. Organic-inorganic hybrid thin film solar cells using conducting polymer and gold nanoparticles

    NASA Astrophysics Data System (ADS)

    Hwan Jung, Hyung; Ho Kim, Dong; Su Kim, Chang; Bae, Tae-Sung; Bum Chung, Kwun; Yoon Ryu, Seung

    2013-05-01

    We employed poly(styrenesulfonate)-doped poly (3,4-ethylenedioxythiophene) (PEDOT:PSS) as a p-layer on textured fluorine-tin-oxide (FTO) glass in pin-type hydrogenated amorphous silicon solar cells (a-Si:H SCs). An amorphous tungsten oxide (WO3) layer and gold nanoparticles (Au-NPs) 10 nm in size were included to prevent the degradation and to increase short-circuit current by the Plasmon effect, respectively, between the PEDOT:PSS and intrinsic-Si layer. The energy band between PEDOT:PSS and WO3 was meaningfully adjusted by Au-NPs. The p-type PEDOT:PSS layer in these organic-inorganic hybrid a-Si:H SCs results in an increased conversion efficiency from ˜2.42% to ˜5.49% and an increased open-circuit voltage from ˜0.29 V to ˜0.56 V. PEDOT:PSS on textured FTO glass is sufficiently showing that it can replace the p-type Si layer in pin-type a-Si:H SCs.

  13. Relationship Between Interfacial Strength and Materials Properties in Hybrid Organic/Inorganic Nanomaterials

    NASA Astrophysics Data System (ADS)

    Snyder, Chad; Richardson, Mickey; Zhou, Jing; Holmes, Gale; Karim, Alamgir; D'Souza, Nandika

    2008-03-01

    Thermal interface materials (TIM's) are critical to the semiconductor electronics industry for heat dissipation, a potential show-stopper for future technology nodes. Essentially, an epoxy nanocomposite, TIMs suffer from a series of typical nanocomposite limitations including heat conduction in nanoscale inclusions, nanoparticle dispersion, void formation with thermal cycling, and interfacial resistance between the matrix and filler. It is postulated that the interfacial adhesion between the matrix and nanofiller is at the root cause of many of these difficulties, however, few techniques exist to characterize this critical property. Compounding this are the overall difficulties associated with characterizing these materials in their ultimate applications, i.e., thin films. To this end, a novel series of organic/inorganic hybrid nanostructured materials based on layered double hydroxides in epoxy matrices were designed as a test bed to develop the measurement techniques needed to elucidate the relationship between the material structure and dynamics and the ultimate materials properties. Initial results are presented based on characterization by mechanical, dielectric, and thermal spectroscopies.

  14. Reduced energy offset via substitutional doping for efficient organic/inorganic hybrid solar cells.

    PubMed

    Jin, Xiao; Sun, Weifu; Zhang, Qin; Ruan, Kelian; Cheng, Yuanyuan; Xu, Haijiao; Xu, Zhongyuan; Li, Qinghua

    2015-06-01

    Charge carrier transport in bulk heterojunction that is central to the device performance of solar cells is sensitively dependent on the energy level alignment of acceptor and donor. However, the effect of energy level regulation induced by nickel ions on the primary photoexcited electron transfer and the performance of P3HT/TiO2 hybrid solar cells remains being poorly understood and rarely studied. Here we demonstrate that the introduction of the versatile nickel ions into TiO2 nanocrystals can significantly elevate the conduction and valence band energy levels of the acceptor, thus resulting in a remarkable reduction of energy level offset between the conduction band of acceptor and lowest unoccupied molecular orbital of donor. By applying transient photoluminescence and femtosecond transient absorption spectroscopies, we demonstrate that the electron transfer becomes more competitive after incorporating nickel ions. In particular, the electron transfer life time is shortened from 30.2 to 16.7 ps, i.e., more than 44% faster than pure TiO2 acceptor, thus leading to a notable increase of power conversion efficiency in organic/inorganic hybrid solar cells. This work underscores the promising virtue of engineering the reduction of 'excess' energy offset to accelerate electron transport and demonstrates the potential of nickel ions in applications of solar energy conversion and photon detectors.

  15. Anti-EGFR antibody conjugated organic-inorganic hybrid lipid nanovesicles selectively target tumor cells.

    PubMed

    Leung, Siu Ling; Zha, Zhengbao; Cohn, Celine; Dai, Zhifei; Wu, Xiaoyi

    2014-09-01

    Chemical conjugation of anti-epidermal growth factor receptor monoclonal antibodies (anti-EGFR mAbs) to organic-inorganic hybrid liposomal immunocerasomes via maleimide-thiol coupling chemistry is explored as a mechanism for selectively targeting cancer cells. The cellular uptake and internalization of immunocerasomes are investigated in A431 cells that express an abnormally high level of EGFR, DU145 cells that overexpress EGFR, and HL-60 cells that are used as a negative control. The internalization study reveals a strong correlation between the receptor-mediated endocytosis of immunocerasomes and the membrane expression of EGFR. Further, free anti-EGFR mAbs and immunocerasomes conjugated with anti-EGFR mAbs at nanomolar doses display similar anti-proliferative effects on A431 cells. Additionally, serum proteins greatly reduce the cellular uptake of cerasomes that is mediated by non-specific receptors, but have no adverse effects on the specific EGFR-mediated delivery of immunocerasomes to A431 cells.

  16. A van der Waals pn heterojunction with organic/inorganic semiconductors

    SciTech Connect

    He, Daowei; Yang, Ziyi; Wu, Bing; Xu, Bingchen; Zhang, Yuhan; Li, Yun; Shi, Yi E-mail: xrwang@nju.edu.cn; Wang, Xinran E-mail: xrwang@nju.edu.cn; Pan, Yiming; Wang, Baigeng; Nan, Haiyan; Luo, Xiaoguang; Ni, Zhenhua; Gu, Shuai; Zhu, Jia; Chai, Yang

    2015-11-02

    van der Waals (vdW) heterojunctions formed by two-dimensional (2D) materials have attracted tremendous attention due to their excellent electrical/optical properties and device applications. However, current 2D heterojunctions are largely limited to atomic crystals, and hybrid organic/inorganic structures are rarely explored. Here, we fabricate the hybrid 2D heterostructures with p-type dioctylbenzothienobenzothiophene (C{sub 8}-BTBT) and n-type MoS{sub 2}. We find that few-layer C{sub 8}-BTBT molecular crystals can be grown on monolayer MoS{sub 2} by vdW epitaxy, with pristine interface and controllable thickness down to monolayer. The operation of the C{sub 8}-BTBT/MoS{sub 2} vertical heterojunction devices is highly tunable by bias and gate voltages between three different regimes: interfacial recombination, tunneling, and blocking. The pn junction shows diode-like behavior with rectifying ratio up to 10{sup 5} at the room temperature. Our devices also exhibit photovoltaic responses with a power conversion efficiency of 0.31% and a photoresponsivity of 22 mA/W. With wide material combinations, such hybrid 2D structures will offer possibilities for opto-electronic devices that are not possible from individual constituents.

  17. Ag-In-Zn-S quantum dots for hybrid organic-inorganic solar cells

    NASA Astrophysics Data System (ADS)

    Kim, Eung-min; Ruankham, Pipat; Lee, Jae-hyeong; Hachiya, Kan; Sagawa, Takashi

    2016-02-01

    Quantum dots of (AgIn)xZn2(1-x)S2 (x = 0.6, 0.8, and 1.0) capped by oleylamine were prepared and applied for hybrid organic-inorganic solar cells consisting of glass-indium-tin-oxide/ZnO/(AgIn)xZn2(1-x)S2/poly(3-hexylthiophene)/MoO3/Ag. The short-circuit current density (Jsc) and open-circuit voltage (Voc) of the hybrid solar cells were measured, and we found a low power conversion efficiency (PCE) below 0.1%. From the incident photon-to-current efficiency (IPCE) profiles of the hybrid devices, there is no marked photocurrent generation from 350 to 700 nm, which is ascribed to the absorption region of (AgIn)xZn2(1-x)S2. To improve the photovoltaic performance, ligand substitution from oleylamine to pyridine was performed. The PCE of the hybrid cell using the pyridine-capped (AgIn)xZn2(1-x)S2 was improved twofold in terms of both Jsc and Voc as compared with that of the oleylamine-capped one. In particular, from the IPCE measurements, a remarkable (more than doubled) enhancement of photocurrent generation from 400 to 450 nm was observed with the pyridine-substituted nanoparticles.

  18. [Responses of rice-wheat rotation system in south Jiangsu to organic-inorganic compound fertilizers].

    PubMed

    Tian, Heng-Da; Zhang, Li; Zhang, Jian-Chao; Wang, Qiu-Jun; Xu, Da-Bing; Yibati, Halihashi; Xu, Jia-Le; Huang, Qi-Wei

    2011-11-01

    In 2006-2007, a field trial was conducted to study the effects of applying three kinds of organic-inorganic compound fertilizers [rapeseed cake compost plus inorganic fertilizers (RCC), pig manure compost plus inorganic fertilizers (PMC), and Chinese medicine residues plus inorganic fertilizers (CMC)] on the crop growth and nitrogen (N) use efficiency of rice-wheat rotation system in South Jiangsu. Grain yield of wheat and rice in the different fertilization treatments was significantly higher than the control (no fertilization). In treatments RCC, PMC and CMC, the wheat yield was 13.1%, 32.2% and 39.3% lower than that of the NPK compound fertilizer (CF, 6760 kg x hm(-2)), respectively, but the rice yield (8504-9449 kg x hm(-2)) was significantly higher than that (7919 kg x hm(-2)) of CF, with an increment of 7.4%-19.3%. In wheat season, the aboveground dry mass, N accumulation, and N use efficiency in treatments RCC, PMC, and CMC were lower than those of CF, but in rice season, these parameters were significantly higher than or as the same as CF. In sum, all the test three compound fertilizers had positive effects on the rice yield and its nitrogen use efficiency in the rice-wheat rotation system, being most significant for RCC.

  19. Synthesis of organic-inorganic hybrid azobenzene materials for the preparation of nanofibers by electrospinning

    NASA Astrophysics Data System (ADS)

    Bućko, Aleksandra; Zielińska, Sonia; Ortyl, Ewelina; Larkowska, Maria; Barille, Regis

    2014-12-01

    The new photochromic hybrid materials containing different mole fractions of highly photoactive 4-[(E)-[4-[ethyl(2-hydroxyethyl)amino]phenyl]azo]-N-(4-methylpyrimidin-2-yl)benzenesulfonamide (SMERe) were prepared by a low temperature sol-gel process. The guest-host systems with triethoxyphenylsilane matrix were obtained. These materials were used to form thin transparent films by a spin-coating technique. Then the ability of thin hybrid films to reversible trans-cis photoisomerization under illumination was investigated using ellipsometry and UV-Vis spectroscopy. The reversible changes of refractive index of the films under illumination were in the range of 0.005-0.056. The maximum absorption of these materials was located at 462-486 nm. Moreover, the organic-inorganic azobenzene materials were used to form nanofibers by electrospinning using various parameters of the process. The microstructure of electrospun fibers depended on sols properties (e.g. concentration and viscosity of the sols) and process conditions (e.g. the applied voltage, temperature or type of the collector) at ambient conditions. The morphology of obtained nanofibers was analyzed by an optical microscopy and scanning electron microscopy. In most instances, the beadless fibers were obtained. The wettability of the surface of electrospun fibers deposited on glass substrates was investigated.

  20. Field-effect transistors with vacuum-deposited organic-inorganic perovskite films as semiconductor channels

    NASA Astrophysics Data System (ADS)

    Matsushima, Toshinori; Yasuda, Takeshi; Fujita, Katsuhiko; Adachi, Chihaya

    2016-12-01

    Films of the organic-inorganic layered perovskite (C6H5C2H4NH3)2SnI4 were vacuum-deposited on substrates heated at various temperatures (Tsub) to investigate the influence of Tsub on their film quality and transistor performance (hole mobilities, threshold voltages, and current on/off ratios). Appropriate substrate heating at Tsub = 60 °C during vacuum deposition led to better-developed perovskite films with larger grains. These films exhibited the best transistor performance in comparison with films fabricated at the other Tsub. The transistor performance was further enhanced by reducing perovskite semiconductor thickness (t) because of a reduction of bulk resistance in a top-contact/bottom-gate transistor structure. By utilizing the optimized Tsub of 60 °C and t of 31 nm, we obtained the most improved hole mobility of 0.78 ± 0.24 cm2/V s, about 5000 times the hole mobilities of our initial transistors fabricated at Tsub = 24 °C and t = 50 nm.

  1. Organic-inorganic perovskite plasmonic nanowire lasers with a low threshold and a good thermal stability.

    PubMed

    Yu, Haichao; Ren, Kuankuan; Wu, Qiang; Wang, Jian; Lin, Jie; Wang, Zhijie; Xu, Jingjun; Oulton, Rupert F; Qu, Shengchun; Jin, Peng

    2016-12-01

    Plasmonic nanolasers have ushered in a paradigm of deep sub-wavelength coherent optical sources with ultrafast dynamics that exploit the strong confinement capabilities of metals. Although these devices are usually associated with higher thresholds due to absorption in metals, the high gain inorganic II-VI and III-V semiconductor materials have allowed the realization of plasmonic nanolasers operating under ambient conditions. In this work, we introduce single-crystalline lead halide perovskite (CH3NH3PbI3) nanowires as an organic-inorganic semiconducting gain material to the plasmonic laser community. We demonstrate plasmonic laser action using a hybrid geometry whereby the perovskite nanowires are placed on a silver substrate with an insulating spacer layer. We report relatively low threshold operation under ambient conditions (13.5 μJ cm(-2)), and the devices work well even at temperatures up to 43.6 °C. The demonstration highlights the high optical gain achievable in perovskite materials and thus provides a solution to high gain materials for plasmonic devices.

  2. Recombination Kinetics in Organic-Inorganic Perovskites: Excitons, Free Charge, and Subgap States

    NASA Astrophysics Data System (ADS)

    Stranks, Samuel D.; Burlakov, Victor M.; Leijtens, Tomas; Ball, James M.; Goriely, Alain; Snaith, Henry J.

    2014-09-01

    Organic-inorganic perovskites are attracting increasing attention for their use in high-performance solar cells. Nevertheless, a detailed understanding of charge generation, interplay of excitons and free charge carriers, and recombination pathways, crucial for further device improvement, remains incomplete. Here, we present an analytical model describing both equilibrium properties of free charge carriers and excitons in the presence of electronic subgap trap states and their time evolution after photoexcitation in CH3NH3PbI3-xClx. At low fluences the charge-trapping pathways limit the photoluminescence quantum efficiency, whereas at high fluences the traps are predominantly filled and recombination of the photogenerated species is dominated by efficient radiative processes. We show experimentally that the photoluminescence quantum efficiency approaches 100% at low temperatures and at high fluences, as predicted by our model. Our approach provides a theoretical framework to understand the fundamental physics of perovskite semiconductors and to help in designing and enhancing the material for improved optoelectronic device operation.

  3. Mechanism of charge recombination in organic-inorganic hybrid perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Yang, Wenchao; Yao, Yao; Wu, Chang-Qin; organic Group Team

    2015-03-01

    In the recent popular organic-inorganic hybrid perovskite solar cells, the slowness of the charge recombination processes is found to be a key factor for contributing to their high efficiencies and open circuit voltages, but the underlying mechanism remains unclear. In this work we study the recombination mechanism in perovskite solar cells and its roles on determining the device performance. Based on macroscopic device model simulations, the recombination resistances (Rrec) under different applied voltages are calculated to characterize the recombination mechanism, and the current density-voltage (J - V) curves are simulated to describe the device performance under at the same time. Through comparison with the impedance spectroscopy (IS) extracted Rrec data, it is found that bimolecular recombination (BR) is the dominant recombination process in the whole applied voltage regime and can determine the open circuit voltage, while the trap-assisted SRH monomolecular recombination (MR) is only important if the trap density is high or the BR rate is significantly reduced. The different electron injection barriers at the contact can induce different patterns for the Rrec- V characteristics. Under the cases of increased band gap or decreased BR rate, the Rrec's are enhanced which leads to high open circuit voltages. We are grateful to the support from the state key laboratory of surface physics, Fudan University.

  4. Low-Dimensional Organic-Inorganic Halide Perovskite: Structure, Properties, and Applications.

    PubMed

    Misra, Ravi K; Cohen, Bat-El; Iagher, Lior; Etgar, Lioz

    2017-07-13

    Three-dimensional (3 D) perovskite has attracted a lot of attention owing to its success in photovoltaic (PV) solar cells. However, one of its major crucial issues lies in its stability, which has limited its commercialization. An important property of organic-inorganic perovskite is the possibility of forming a layered material by using long organic cations that do not fit into the octahedral cage. These long organic cations act as a "barrier" that "caps" 3 D perovskite to form the layered material. Controlling the number of perovskite layers could provide a confined structure with chemical and physical properties that are different from those of 3 D perovskite. This opens up a whole new batch of interesting materials with huge potential for optoelectronic applications. This Minireview presents the synthesis, properties, and structural orientation of low-dimensional perovskite. It also discusses the progress of low-dimensional perovskite in PV solar cells, which, to date, have performance comparable to that of 3 D perovskite but with enhanced stability. Finally, the use of low-dimensional perovskite in light-emitting diodes (LEDs) and photodetectors is discussed. The low-dimensional perovskites are promising candidates for LED devices, mainly because of their high radiative recombination as a result of the confined low-dimensional quantum well. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Optical Description of Mesostructured Organic-Inorganic Halide Perovskite Solar Cells.

    PubMed

    Anaya, Miguel; Lozano, Gabriel; Calvo, Mauricio E; Zhang, Wei; Johnston, Michael B; Snaith, Henry J; Míguez, Hernán

    2015-01-02

    Herein we describe both theoretically and experimentally the optical response of solution-processed organic-inorganic halide perovskite solar cells based on mesostructured scaffolds. We develop a rigorous theoretical model using a method based on the propagation of waves in layered media, which allows visualizing the way in which light is spatially distributed across the device and serves to quantify the fraction of light absorbed by each medium comprising the cell. The discrimination between productive and parasitic absorption yields an accurate determination of the internal quantum efficiency. State-of-the-art devices integrating mesoporous scaffolds infiltrated with perovskite are manufactured and characterized to support the calculations. This combined experimental and theoretical analysis provides a rational understanding of the optical behavior of perovskite cells and can be beneficial for the judicious design of devices with improved performance. Notably, our model justifies the presence of a solid perovskite capping layer in all of the highest efficiency perovskite solar cells based on thinner mesoporous scaffolds.

  6. Electroluminescent devices using a layered organic-inorganic perovskite structure as emitter

    NASA Astrophysics Data System (ADS)

    Coelle, Michael; Bruetting, Wolfgang; Schwoerer, Markus; Yahiro, Masayuki; Tsutsui, Tetsuo

    2001-02-01

    Self-organizing layered perovskite compounds like (formula available in paper) naturally form a dielectric quantum-well structure in which semiconducting PbI4 layers and organic (C6H5C2H4NH3) layers are alternately piled up. Due to their low- dimensional semiconductor nature they exhibit a strong absorption and sharp photoluminescence from the exciton band. In electroluminescent devices pure green emission peaking at 520 nm with a very narrow half-width of about 10 nm has been reported. As the organic-inorganic layered structure has promising properties for EL-devices, we investigated two- and three layer structures using this perovskite as emitter material in combination with additional hole and electron injection layers. To get more insight into electrical properties and electroluminescence- mechanisms of this material, temperature dependent current- voltage-luminance characteristics have been measured, showing an increasing onset-voltage for current flow from 2.6 V at room temperature to about 8.8 V at 80 K. Electroluminescence is detected at temperatures below 150 K with onset voltages of about 13 V. At liquid nitrogen temperature efficiencies of (formula available in paper) are obtained.

  7. Ionic behavior of organic-inorganic metal halide perovskite based metal-oxide-semiconductor capacitors.

    PubMed

    Wang, Yucheng; Zhang, Yuming; Pang, Tiqiang; Xu, Jie; Hu, Ziyang; Zhu, Yuejin; Tang, Xiaoyan; Luan, Suzhen; Jia, Renxu

    2017-05-24

    Organic-inorganic metal halide perovskites are promising semiconductors for optoelectronic applications. Despite the achievements in device performance, the electrical properties of perovskites have stagnated. Ion migration is speculated to be the main contributing factor for the many unusual electrical phenomena in perovskite-based devices. Here, to understand the intrinsic electrical behavior of perovskites, we constructed metal-oxide-semiconductor (MOS) capacitors based on perovskite films and performed capacitance-voltage (C-V) and current-voltage (I-V) measurements of the capacitors. The results provide direct evidence for the mixed ionic-electronic transport behavior within perovskite films. In the dark, there is electrical hysteresis in both the C-V and I-V curves because the mobile negative ions take part in charge transport despite frequency modulation. However, under illumination, the large amount of photoexcited free carriers screens the influence of the mobile ions with a low concentration, which is responsible for the normal C-V properties. Validation of ion migration for the gate-control ability of MOS capacitors is also helpful for the investigation of perovskite MOS transistors and other gate-control photovoltaic devices.

  8. Self-assembled organic-inorganic hybrid glucoamylase nanoflowers with enhanced activity and stability.

    PubMed

    Nadar, Shamraja S; Gawas, Sarita D; Rathod, Virendra K

    2016-11-01

    An organic-inorganic hybrid glucoamylase nanoflower was prepared in single pot by simple, facile and highly efficient method. The stepwise formation of enzyme-embedded hybrid nanoflowers and influence of experimental parameters viz. pH of solution mixture, enzyme and copper ion concentration on the activity of prepared hybrid nanoflowers were systematically investigated. The self-assembled hybrid glucoamylase nanoflowers were synthesized by mixing aqueous solution of copper sulphate (200mM) with PBS (pH 7.5, 5mM) containing glucoamylase (1mg/mL) in 24h at room temperature. These prepared nanoflowers were further characterized by FT-IR, SEM and XRD. The hybrid nanoflowers exhibited 204% enhanced activity recovery and two folds improvement in thermal stability in terms of half-life (in the range of 50-70°C) with respect to the free form. The hybrid glucoamylase nanoflowers retained 70% residual activity after eight successive cycles indicating their excellent durability. Additionally, the nanoflowers retained up to 91% residual activity upto 25 days of storage. Moreover, the conformational changes occurred in glucoamylase structure after preparing hybrid nanoflowers were evaluated by FT-IR spectroscopy data tools.

  9. Investigation of organic, inorganic and synthetic adsorbents for the pretreatment of landfill leachate.

    PubMed

    Shahriari, H; Fernandes, L; Tezel, F H

    2008-05-01

    An investigation into the use of organic, inorganic and synthetic adsorbents for the pretreatment of landfill leachate, generated by the City of Ottawa Trail Road Landfill, was carried out. The purpose of this project was to reduce the concentration of contaminants in order to meet the local Sewer Use By-Laws, prior to transporting the leachate from the generating site to the local municipal sewage treatment plant, and thereby reducing the disposal fees. Peat moss, compost, clinoptilolite, basalt and two types of activated carbon (DSR-A and F400) were investigated to determine the adsorption capacity for contaminants from leachate. Kinetic studies were also performed. The results based on batch adsorption isotherms show that peat moss has the highest adsorption capacity for boron (B) and barium (Ba), compared with the other adsorbents. Also peat moss has good removals of Total Kjeldahl Nitrogen (TKN), Total Organic Carbon (TOC), and benzene, toluene, ethylbenzene and xylene (BTEX), but these are lower than the removals obtained with activated carbon. Because of its relatively low cost and higher adsorption of B and Ba, peat moss was selected as the filter media for the column studies. The treated leachate was tested for B, Ba, TKN, carbonaceous biological oxygen demand (CBOD5) and hydrogen sulfide (H2S). The breakthrough curves for B and Ba showed the effectiveness of peat moss in removing these contaminants.

  10. Cellular morphology of organic-inorganic hybrid foams based on alkali alumino-silicate matrix

    SciTech Connect

    Verdolotti, Letizia; Capasso, Ilaria; Lavorgna, Marino; Liguori, Barbara; Caputo, Domenico; Iannace, Salvatore

    2014-05-15

    Organic-inorganic hybrid foams based on an alkali alumino-silicate matrix were prepared by using different foaming methods. Initially, the synthesis of an inorganic matrix by using aluminosilicate particles, activated through a sodium silicate solution, was performed at room temperature. Subsequently the viscous paste was foamed by using three different methods. In the first method, gaseous hydrogen produced by the oxidization of Si powder in an alkaline media, was used as blowing agent to generate gas bubbles in the paste. In the second method, the porous structure was generated by mixing the paste with a “meringue” type of foam previously prepared by whipping, under vigorous stirring, a water solution containing vegetal proteins as surfactants. In the third method, a combination of these two methods was employed. The foamed systems were consolidated for 24 hours at 40°C and then characterized by FTIR, X-Ray diffraction, scanning electron microscopy (SEM) and compression tests. Low density foams (∼500 Kg/m{sup 3}) with good cellular structure and mechanical properties were obtained by combining the “meringue” approach with the use of the chemical blowing agent based on Si.

  11. Spontaneous Assembly of an Organic-Inorganic Nucleic Acid Z-DNA Double-Helix Structure.

    PubMed

    Kulikov, Vladislav; Johnson, Naomi A B; Surman, Andrew J; Hutin, Marie; Kelly, Sharon M; Hezwani, Mohammed; Long, De-Liang; Meyer, Gerd; Cronin, Leroy

    2017-01-19

    Herein, we report a hybrid polyoxometalate organic-inorganic compound, Na2 [(HGMP)2 Mo5 O15 ]⋅7 H2 O (1; where GMP=guanosine monophosphate), which spontaneously assembles into a structure with dimensions that are strikingly similar to those of the naturally occurring left-handed Z-form of DNA. The helical parameters in the crystal structure of the new compound, such as rise per turn and helical twist per dimer, are nearly identical to this DNA conformation, allowing a close comparison of the two structures. Solution circular dichroism studies show that compound 1 also forms extended secondary structures in solution. Gel electrophoresis studies demonstrate the formation of non-covalent adducts with natural plasmids. Thus we show a route by which simple hybrid inorganic-organic monomers, such as compound 1, can spontaneously assemble into a double helix without the need for a covalently connected linear sequence of nucleic acid base pairs. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Domain-dependent electronic structure and optical absorption property in hybrid organic-inorganic perovskite.

    PubMed

    Meng, Xiang; Zhang, Ruifeng; Fu, Zhongheng; Zhang, Qianfan

    2016-10-05

    Hybrid organic-inorganic perovskites, represented by materials in the CH3NH3PbI3 series, have become one of the most promising materials for solar cells with a high power conversion efficiency and low cost. The ordered Pb-I cage in such hybrid perovskites can induce the polarized cations to form a variety of polarization domains with long-range order, which will lead to the formation of specific atomic conformations or metastable crystalline phases, unique electronic band structures and optical absorption properties. Such domain-dependent characteristics play a critical role in the phase transition and service stability of such solar cells, and also open up the opportunity of tuning their electronic structure. In the present study, we systematically investigate the band structures and optical absorption properties of different electronically ordered domains in CH3NH3PbI3. By comparing different perovskites containing various cations, we have clarified the important influence of cation polarization on domain-dependent properties. Our results provide not only a possible pathway for the manipulation of band structure by applying an external field, but also a novel scheme for improving the performance and stability of hybrid perovskites.

  13. Simple orientational control over cylindrical organic-inorganic block copolymer domains for etch mask applications.

    SciTech Connect

    Ramanathan, M.; Nettleton, E.; Darling, S. B.

    2009-02-01

    Bottom-up patterning methodologies, predicated on chemical self-assembly, have the potential to transcend limitations associated with more traditional lithographies. By controlling the domain orientation of a cylinder-forming organic-inorganic block copolymer, poly(styrene-block-ferrocenyldimethylsilane), it is possible to straightforwardly fabricate massive arrays of either nanoscale dots or wires out of a film composed of a wide variety of materials. In the work reported here, orientational control is achieved by manipulating the polymer film thickness in concert with the annealing treatment. For films much thinner than the equilibrium periodicity of the microdomains, the cylinders spontaneously orient themselves perpendicular to the substrate. Films with thickness close to the equilibrium periodicity exhibit the more common in-plane orientation following thermal annealing. Solvent annealing leads to an in-plane orientation for the full range of film thicknesses studied. As a demonstration of the effectiveness of this method, semiconductor substrates were patterned with arrays of posts and wires, respectively, using the same starting polymeric material as the etch mask. Compatibility of this polymer with various substrate materials is also demonstrated.

  14. Photochromic dynamics of organic-inorganic hybrids supported on transparent and flexible recycled PET

    NASA Astrophysics Data System (ADS)

    Cruz, R. P.; Nalin, M.; Ribeiro, S. J. L.; Molina, C.

    2017-04-01

    Organic-inorganic hybrids (OIH) synthesized by sol gel process containing phosphotungstic acid (PWA) entrapped have been attracted much attention for ultraviolet sensitive materials. However, the limitations for practical photochromic application of these materials are the poor interaction with flexible polymer substrates such as Poly(ethyleneterephthalate) (PET) and also photo response under ultraviolet radiation. This paper describes the use of the d-ureasil HOI, based on siliceous network grafted through linkages to both ends of polymer chain containing 2.5 poly(oxyethylene) units with PWA entrapped prepared as films on recycled PET. Films were characterized by IR-ATR, XRD, TG/DTG, UV-Vis and Contact angle. XRD patterns showed that both pristine hybrid matrix and those containing PWA are amorphous. IR showed that PWA structure is preserved in the matrix and interactions between them occur by intermolecular forces. Films are thermally stable up to 325 °C and contact angle of 25.1° showed a good wettability between substrate and hybrid matrix. Furthermore, films showed fast photochromic response after 1 min of ultraviolet exposure time. The bleaching process revealed that the relaxation process is dependent of the temperature and the activation energy of 47.2 kJ mol-1 was determined. The properties of these films make them potential candidates for applications in flexible photochromic materials.

  15. Cellular morphology of organic-inorganic hybrid foams based on alkali alumino-silicate matrix

    NASA Astrophysics Data System (ADS)

    Verdolotti, Letizia; Liguori, Barbara; Capasso, Ilaria; Caputo, Domenico; Lavorgna, Marino; Iannace, Salvatore

    2014-05-01

    Organic-inorganic hybrid foams based on an alkali alumino-silicate matrix were prepared by using different foaming methods. Initially, the synthesis of an inorganic matrix by using aluminosilicate particles, activated through a sodium silicate solution, was performed at room temperature. Subsequently the viscous paste was foamed by using three different methods. In the first method, gaseous hydrogen produced by the oxidization of Si powder in an alkaline media, was used as blowing agent to generate gas bubbles in the paste. In the second method, the porous structure was generated by mixing the paste with a "meringue" type of foam previously prepared by whipping, under vigorous stirring, a water solution containing vegetal proteins as surfactants. In the third method, a combination of these two methods was employed. The foamed systems were consolidated for 24 hours at 40°C and then characterized by FTIR, X-Ray diffraction, scanning electron microscopy (SEM) and compression tests. Low density foams (˜500 Kg/m3) with good cellular structure and mechanical properties were obtained by combining the "meringue" approach with the use of the chemical blowing agent based on Si.

  16. Organic-inorganic interface-induced multi-fluorescence of MgO nanocrystal clusters and their applications in cellular imaging.

    PubMed

    Xie, Shuifen; Bao, Shixiong; Ouyang, Junjie; Zhou, Xi; Kuang, Qin; Xie, Zhaoxiong; Zheng, Lansun

    2014-04-25

    Surface functionalization of inorganic nanomaterials through chemical binding of organic ligands on the surface unsaturated atoms, forming unique organic-inorganic interfaces, is a powerful approach for creating special functions for inorganic nanomaterials. Herein, we report the synthesis of hierarchical MgO nanocrystal clusters (NCs) with an organic-inorganic interface induced multi-fluorescence and their application as new alternative labels for cellular imaging. The synthetic method was established by a dissolution and regrowth process with the assistance of carboxylic acid, in which the as-prepared MgO NCs were modified with carboxylic groups at the coordinatively unsaturated atoms of the surface. By introducing acetic acid to partially replace oleic acid in the reaction, the optical absorption of the produced MgO NCs was progressively engineered from the UV to the visible region. Importantly, with wider and continuous absorption profile, those MgO NCs presented bright and tunable multicolor emissions from blue-violet to green and yellow, with the highest absolute quantum yield up to (33±1) %. The overlap for the energy levels of the inorganic-organic interface and low-coordinated states stimulated a unique fluorescence resonance energy transfer phenomenon. Considering the potential application in cellular imaging, such multi-fluorescent MgO NCs were further encapsulated with a silica shell to improve the water solubility and stability. As expected, the as-formed MgO@SiO2 NCs possessed great biocompatibility and high performance in cellular imaging. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Fabrication of advanced organic-inorganic nanocomposite coatings for biomedical applications by electrodeposition

    NASA Astrophysics Data System (ADS)

    Pang, Xin

    advanced biomedical implants. For further functionalization of the HA-chitosan composite coating, Ag and CaSiO3 have been incorporated into the coating. Novel HA--Ag--chitosan and HA-CaSiO3-chitosan nanocomposite coatings have been deposited as monolayers, laminates, and coatings of graded composition. The obtained results can be used for the development of biocompatible antimicrobial coatings with controlled Ag+ release rate, and nanocomposite coatings with enhanced bioactivity.

  18. Nanostructured organic/inorganic semicondutor photovoltaics: Investigation on morphology and optoelectronics performance

    NASA Astrophysics Data System (ADS)

    Wanninayake, Aruna Pushpa Kumara

    Organic solar cell is a promising technology because of the versatility of organic materials in terms of tunability of their electrical and optical properties. In addition, their relative insensitivity to film imperfections potentially allows for very low-cost high-throughput roll-to-roll processing. However, the power conversion efficiency of organic solar cell is still limited and needs to be improved in order to be competitive with grid parity. This work is focused on the design and characterization of a new organic/inorganic hybrid device to enhance the efficiency factors of bilayer organic solar cells such as: light absorption, exciton diffusion, exciton dissociation, charge transportation and charge collection at the electrodes. In a hybrid solar cell operation, external quantum efficiency is determined by these five factors. The external quantum efficiency has linear relationship to the power conversation efficiency via short circuit current density. Bulk heterojunction (BHJ) PSCs benefit from a homogeneous donor-acceptor (D-A) contact interface compared to their inorganic counterpart. A homogenous D-A interface offers a longer free path for charge carriers, resulting in a longer diffusional pathway and a larger coulomb interaction between electrons and holes. This is triggered by the low dielectric constant of organic semiconductors. Among various conventional donor-acceptor structures, poly(3-hexylthiophene)/[6,6]-phenyl-C70-butyric acid methyl ester (P3HT/PCBM) mixture is the most promising and ideal donor-acceptor pair due to their unique properties. In order to take benefits from both organic and inorganic materials, inorganic nanoparticles are incorporated in this donor-acceptor polymer structure. Light trapping enhances light absorption and increases efficiencies with thinner device structure. In this study, copper oxide nanoparticles are used in the P3HT/PC70BM active layer to optimize the optical absorption properties in the blend. In addition, zinc

  19. Fundamental understanding of the synthesis and tribological behavior of organic-inorganic nanoparticles

    NASA Astrophysics Data System (ADS)

    Verma, Arpana

    The objective of this doctoral research is to design, synthesize, and test an advanced lubricant additive using novel active nanostructures of inorganic layered solid lubricant particles (MoS2), integrated and encapsulated with organic molecules, namely triglycerides and phospholipids, respectively. It was hypothesized that this combination can uniquely respond under severe boundary lubrication conditions (where high frictional losses exist). These organic-inorganic nanoparticles were synthesized using a top-down nanomanufacturing process, commonly known as high-energy ball milling or mechanical milling. It was performed in the presence of ambient air followed by organic molecules (triglycerides) to produce nanoparticles with controlled morphologies and surface properties. SEM, particle size analysis, and XRD showed a particle size reduction up to 100 nm and a grain size of 6 nm. TEM showed that after air milling for 48 hrs, agglomerated clusters of quasi-spherical nanoparticles of MoS2 were formed. HRTEM shows that the inter-planar defects and milling assisted shearing between the platelets caused the resultant curling of the planes, forming these unique nanostructures. Further milling of these clusters for 48 hrs in an organic medium (triglycerides) produced mono-dispersed quasi-spherical nanoparticles (<100 nm size). Surface analysis showed the presence of hydrocarbons, COO- molecules on the deagglomerated nanoparticles indicating a chemisorbed capping layer. A capping layer was also confirmed by zeta potential analysis. Tribological studies using pin-on-disk and four-ball tests showed that this novel active material can significantly reduce friction and wear. The coefficient of friction was reduced in pin-on-disk from 0.15 to 0.04 when these nanoparticles were mixed with the base oil. Similarly, in four-ball tests, significant reduction in coefficient of friction (0.06-0.07) and wear (0.47 mm) reduction were observed. To understand the underlying mechanism of

  20. Hybrid organic-inorganic heterojunction solar cells with 12% efficiency by utilizing flexible film-silicon with a hierarchical surface.

    PubMed

    Thiyagu, Subramani; Hsueh, Chen-Chih; Liu, Chien-Ting; Syu, Hong-Jhang; Lin, Tzu-Ching; Lin, Ching-Fuh

    2014-03-21

    This paper reports an organic-inorganic hybrid solar cell with a hierarchical surface composed of high density silicon nanoholes and micro-desert textures. High-efficiency organic-inorganic hybrid solar cell Si/PEDOT-PSS with a hierarchical surface, showing a power conversion efficiency of 12%. The structure provides excellent light absorption over 97% for the spectral range of 300 to 1100 nm with a thickness of 60 μm due to internal multiple reflections caused by subwavelength features of high density silicon nanoholes and micro-desert textures. In addition, from the angle of incidence (AOI) observed, even at the large angle of 75°, the reflectance value still exhibits less than 1%. With the advantage of very thin silicon material and inexpensive processing, hybrid silicon/polymer solar cells are promising for various applications and thus could be an economically feasible alternative energy solution in the future.

  1. Multicolor Emission from Poly(p-Phenylene)/Nanoporous ZnMnO Organic-Inorganic Hybrid Light-Emitting Diode.

    PubMed

    Lee, Sejoon; Lee, Youngmin; Kim, Deuk Young; Panin, Gennady N

    2016-12-28

    The voltage-tunable multicolor emission was realized in a poly(p-phenylene)/nanoporous ZnMnO organic-inorganic hybrid light-emitting diode. Red, green, and blue (RGB) colors sequentially appeared with increasing magnitude of the bias voltage (i.e., R → RG → RGB with V↑). At a higher voltage (>2.4 V), eventually, the device emitted the visible light with a mixture of colors including RGB. These unique features may move us a step closer to the application of organic-inorganic hybrid solid-state lighting devices for the full-color display and/or the electrical-to-optical data converter for multivalue electronic signal processes. In-depth analyses on electrical and optical properties are presented, and voltage-controllable multicolor-emission mechanisms are discussed.

  2. Organic/Inorganic Nano-hybrids with High Dielectric Constant for Organic Thin Film Transistor Applications.

    PubMed

    Yu, Yang-Yen; Jiang, Ai-Hua; Lee, Wen-Ya

    2016-12-01

    The organic material soluble polyimide (PI) and organic-inorganic hybrid PI-barium titanate (BaTiO3) nanoparticle dielectric materials (IBX, where X is the concentration of BaTiO3 nanoparticles in a PI matrix) were successfully synthesized through a sol-gel process. The effects of various BaTiO3 contents on the hybrid film performance and performance optimization were investigated. Furthermore, pentacene-based organic thin film transistors (OTFTs) with PI-BaTiO3/polymethylmethacrylate or cyclic olefin copolymer (COC)-modified gate dielectrics were fabricated and examined. The hybrid materials showed effective dispersion of BaTiO3 nanoparticles in the PI matrix and favorable thermal properties. X-ray diffraction patterns revealed that the BaTiO3 nanoparticles had a perovskite structure. The hybrid films exhibited high formability and planarity. The IBX hybrid dielectric films exhibited tunable insulating properties such as the dielectric constant value and capacitance in ranges of 4.0-8.6 and 9.2-17.5 nF cm(-2), respectively. Adding the modified layer caused the decrease of dielectric constant values and capacitances. The modified dielectric layer without cross-linking displayed a hydrophobic surface. The electrical characteristics of the pentacene-based OTFTs were enhanced after the surface modification. The optimal condition for the dielectric layer was 10 wt% hybrid film with the COC-modified layer; moreover, the device exhibited a threshold voltage of 0.12 V, field-effect mobility of 4.32 × 10(-1) cm(2) V(-1) s(-1), and on/off current of 8.4 × 10(7).

  3. Effect of halide-mixing on the switching behaviors of organic-inorganic hybrid perovskite memory

    PubMed Central

    Hwang, Bohee; Gu, Chungwan; Lee, Donghwa; Lee, Jang-Sik

    2017-01-01

    Mixed halide perovskite materials are actively researched for solar cells with high efficiency. Their hysteresis which originates from the movement of defects make perovskite a candidate for resistive switching memory devices. We demonstrate the resistive switching device based on mixed-halide organic-inorganic hybrid perovskite CH3NH3PbI3−xBrx (x = 0, 1, 2, 3). Solvent engineering is used to deposit the homogeneous CH3NH3PbI3−xBrx layer on the indium-tin oxide-coated glass substrates. The memory device based on CH3NH3PbI3−xBrx exhibits write endurance and long retention, which indicate reproducible and reliable memory properties. According to the increase in Br contents in CH3NH3PbI3−xBrx the set electric field required to make the device from low resistance state to high resistance state decreases. This result is in accord with the theoretical calculation of migration barriers, that is the barrier to ionic migration in perovskites is found to be lower for Br− (0.23 eV) than for I− (0.29–0.30 eV). The resistive switching may be the result of halide vacancy defects and formation of conductive filaments under electric field in the mixed perovskite layer. It is observed that enhancement in operating voltage can be achieved by controlling the halide contents in the film. PMID:28272547

  4. Assessment of potable water quality including organic, inorganic, and trace metal concentrations.

    PubMed

    Nahar, Mst Shamsun; Zhang, Jing

    2012-02-01

    The quality of drinking water (tap, ground, and spring) in Toyama Prefecture, Japan was assessed by studying quality indicators including major ions, total carbon, and trace metal levels. The physicochemical properties of the water tested were different depending on the water source. Major ion concentrations (Ca(2+), K(+), Si(4+), Mg(2+), Na(+), SO(4)(2-), HCO(3)(-), NO(3)(-), and Cl(-)) were determined by ion chromatography, and the results were used to generate Stiff diagrams in order to visually identify different water masses. Major ion concentrations were higher in ground water than in spring and tap water. The relationship between alkaline metals (Na(+) and K(+)), alkaline-earth metals (Ca(2+) and Mg(2+)), and HCO(3)(-) showed little difference between deep and shallow ground water. Toyama ground, spring, and tap water were all the same type of water mass, called Ca-HCO(3). The calculated total dissolved solid values were below 300 mg/L for all water sources and met World Health Organization (WHO) water quality guidelines. Trace levels of As, Cd, Cr, Co, Cu, Fe, Pb, Mn, Mo, Ni, V, Zn, Sr, and Hg were detected in ground, spring, and tap water sources using inductively coupled plasma atomic emission spectrometry, and their levels were below WHO and Japanese water quality standard limits. Volatile organic carbon compounds were quantified by headspace gas chromatography-mass spectrometry, and the measured concentrations met WHO and Japanese water quality guidelines. Total trihalomethanes (THMs) were the major contaminant detected in all natural drinking water sources, but the concentration was highest in tap water (37.27 ± 0.05 μg/L). Notably, THMs concentrations reached up to 1.1 ± 0.05 μg/L in deep ground water. The proposed model gives an accurate description of the organic, inorganic, and trace heavy metal indicators studied here and may be used in natural clean water quality management.

  5. Organic/Inorganic Nano-hybrids with High Dielectric Constant for Organic Thin Film Transistor Applications

    NASA Astrophysics Data System (ADS)

    Yu, Yang-Yen; Jiang, Ai-Hua; Lee, Wen-Ya

    2016-11-01

    The organic material soluble polyimide (PI) and organic-inorganic hybrid PI-barium titanate (BaTiO3) nanoparticle dielectric materials (IBX, where X is the concentration of BaTiO3 nanoparticles in a PI matrix) were successfully synthesized through a sol-gel process. The effects of various BaTiO3 contents on the hybrid film performance and performance optimization were investigated. Furthermore, pentacene-based organic thin film transistors (OTFTs) with PI-BaTiO3/polymethylmethacrylate or cyclic olefin copolymer (COC)-modified gate dielectrics were fabricated and examined. The hybrid materials showed effective dispersion of BaTiO3 nanoparticles in the PI matrix and favorable thermal properties. X-ray diffraction patterns revealed that the BaTiO3 nanoparticles had a perovskite structure. The hybrid films exhibited high formability and planarity. The IBX hybrid dielectric films exhibited tunable insulating properties such as the dielectric constant value and capacitance in ranges of 4.0-8.6 and 9.2-17.5 nF cm-2, respectively. Adding the modified layer caused the decrease of dielectric constant values and capacitances. The modified dielectric layer without cross-linking displayed a hydrophobic surface. The electrical characteristics of the pentacene-based OTFTs were enhanced after the surface modification. The optimal condition for the dielectric layer was 10 wt% hybrid film with the COC-modified layer; moreover, the device exhibited a threshold voltage of 0.12 V, field-effect mobility of 4.32 × 10-1 cm2 V-1 s-1, and on/off current of 8.4 × 107.

  6. Understanding and eliminating non-radiative decay in organic-inorganic perovskites (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Stranks, Samuel D.; de Quilettes, Dane

    2016-09-01

    Organic-inorganic perovskites such as CH3NH3PbI3 are highly promising materials for a variety of optoelectronic applications, with certified power conversion efficiencies in solar cells already exceeding 21% and promising applications in light-emitting diodes, lasers and photodetectors also emerging. A key enabling property of the perovskites is their high photoluminescence quantum efficiency, suggesting that these materials could in principle approach the thermodynamic device efficiency limits in which all recombination is radiative. However, non-radiative recombination sites are present which vary heterogeneously from grain to grain and limit device performance. Here, I will present results where we probe the local photophysics of neat CH3NH3PbI3 perovskite films using confocal photoluminescence (PL) measurements and correlate the observations with the local chemistry of the grains using energy-dispersive X-ray spectroscopy (EDX) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). We investigate the connection between grains that are bright or dark in emission and the local Pb:I ratios at the surface and through the grains. We also examine how the photophysics, local chemistry and non-radiative decay pathways change slowly over time under illumination. Our results reveal a "photo-induced cleaning" arising from a redistribution of iodide content in the films, giving strong evidence for photo-induced ion migration. These slow transient effects appear to be related to anomalous hysteresis phenomena observed in full solar cells. I will discuss how immobilizing ions, reducing trap densities and achieving homogenous stoichiometries could suppress hysteresis effects and lead to devices approaching the efficiency limits.

  7. Organic-inorganic random copolymers from methacrylate-terminated poly(ethylene oxide) with 3-methacryloxypropylheptaphenyl polyhedral oligomeric silsesquioxane: synthesis via RAFT polymerization and self-assembly behavior.

    PubMed

    Wei, Kun; Li, Lei; Zheng, Sixun; Wang, Ge; Liang, Qi

    2014-01-14

    In this contribution, we report the synthesis of organic-inorganic random polymers from methacrylate-terminated poly(ethylene oxide) (MAPEO) (Mn = 950) and 3-methacryloxypropylheptaphenyl polyhedral oligomeric silsesquioxane (MAPOSS) macromers via reversible addition-fragmentation chain transfer (RAFT) polymerization with 4-cyano-4-(thiobenzoylthio) valeric acid (CTBTVA) as the chain transfer agent. The organic-inorganic random copolymers were characterized by means of (1)H NMR spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The results of GPC indicate that the polymerizations were carried out in a controlled fashion. Transmission electron microscopy (TEM) showed that the organic-inorganic random copolymers in bulk were microphase-separated and the POSS microdomains were formed via POSS-POSS interactions. In aqueous solutions the organic-inorganic random copolymers were capable of self-assembling into spherical nanoobjects as evidenced by transmission electron microscopy (TEM) and dynamic laser scattering (DLS). The self-assembly behavior of the organic-inorganic random copolymers was also found to occur in the mixtures with the precursors of epoxy. The nanostructures were further fixed via subsequent curing reaction and thus the organic-inorganic nanocomposites were obtained. The formation of nanophases in epoxy thermosets was confirmed by transmission electron microscopy (TEM) and dynamic mechanical thermal analysis (DMTA). The organic-inorganic nanocomposites displayed the enhanced surface hydrophobicity as evidenced by surface contact angle measurements.

  8. Hybrid organic-inorganic heterojunction solar cells with 12% efficiency by utilizing flexible film-silicon with a hierarchical surface

    NASA Astrophysics Data System (ADS)

    Thiyagu, Subramani; Hsueh, Chen-Chih; Liu, Chien-Ting; Syu, Hong-Jhang; Lin, Tzu-Ching; Lin, Ching-Fuh

    2014-02-01

    This paper reports an organic-inorganic hybrid solar cell with a hierarchical surface composed of high density silicon nanoholes and micro-desert textures. High-efficiency organic-inorganic hybrid solar cell Si/PEDOT-PSS with a hierarchical surface, showing a power conversion efficiency of 12%. The structure provides excellent light absorption over 97% for the spectral range of 300 to 1100 nm with a thickness of 60 μm due to internal multiple reflections caused by subwavelength features of high density silicon nanoholes and micro-desert textures. In addition, from the angle of incidence (AOI) observed, even at the large angle of 75°, the reflectance value still exhibits less than 1%. With the advantage of very thin silicon material and inexpensive processing, hybrid silicon/polymer solar cells are promising for various applications and thus could be an economically feasible alternative energy solution in the future.This paper reports an organic-inorganic hybrid solar cell with a hierarchical surface composed of high density silicon nanoholes and micro-desert textures. High-efficiency organic-inorganic hybrid solar cell Si/PEDOT-PSS with a hierarchical surface, showing a power conversion efficiency of 12%. The structure provides excellent light absorption over 97% for the spectral range of 300 to 1100 nm with a thickness of 60 μm due to internal multiple reflections caused by subwavelength features of high density silicon nanoholes and micro-desert textures. In addition, from the angle of incidence (AOI) observed, even at the large angle of 75°, the reflectance value still exhibits less than 1%. With the advantage of very thin silicon material and inexpensive processing, hybrid silicon/polymer solar cells are promising for various applications and thus could be an economically feasible alternative energy solution in the future. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr06323b

  9. Improvement in open circuit voltage of MEHPPV-FeS2 nanoparticle based organic inorganic hybrid solar cell

    NASA Astrophysics Data System (ADS)

    Layek, Animesh; Middya, Somnath; Ray, Partha Pratim

    2013-02-01

    In this study we have synthesized high quality FeS2 nanoparticles by solvothermal route and was applied as semiconducting acceptor in MEHPPV:FeS2 nanoparticle based organic inorganic hybrid solar cells. The open circuit voltage improved from 0.64V to 0.72V of the device due to modification of band gap of donor material by introducing nanoparticles.

  10. Defect states at organic-inorganic interfaces: Insight from first principles calculations for pentaerythritol tetranitrate on MgO surface

    NASA Astrophysics Data System (ADS)

    Tsyshevsky, Roman V.; Rashkeev, Sergey N.; Kuklja, Maija M.

    2015-07-01

    Light-responsive organic-inorganic interfaces offer experimental opportunities that are otherwise difficult to achieve. Since laser light can be manipulated very precisely, it becomes possible to engineer selective, predictive, and highly controlled interface properties. Photochemistry of organic-inorganic energetic interfaces is a rapidly emerging research field in which energy absorption and interface stability mechanisms have yet to be established. To explore the interaction of the laser irradiation with molecular materials, we performed first principle calculations of a prototype organic-inorganic interface between a nitroester (pentaerythritol tetranitrate, PETN, C5H8N4O12) and a magnesium oxide (MgO) surface. We found that the light absorption is defined by the band alignment between interface components and interfacial charge transfer coupled with electronic states in the band gap, generated by oxide surface defects. Hence the choice of an oxide substrate and its morphology makes the optical absorption tunable and governs both the energy accumulation and energy release at the interface. The obtained results offer a possible consistent interpretation of experiments on selective laser initiation of energetic materials, which reported that the presence of metal oxide additives triggered the photoinitiation by excitation energy much lower than the band gap. We suggest that PETN photodecomposition is catalyzed by oxygen vacancies (F0 centers) at the MgO surface. Our conclusions predict ways for a complete separation of thermo- and photo-stimulated interface chemistry of molecular materials, which is imperative for highly controllable fast decomposition and was not attainable before. The methodology described here can be applied to any type of molecular material/wide band gap dielectric interfaces. It provides a solid basis for novel design and targeted improvements of organic-inorganic interfaces with desired properties that promise to enable vastly new concepts

  11. Organic-inorganic hybrid polymer electrolytes based on polyether diamine, alkoxysilane, and trichlorotriazine: Synthesis, characterization, and electrochemical applications

    NASA Astrophysics Data System (ADS)

    Saikia, Diganta; Wu, Cheng-Gang; Fang, Jason; Tsai, Li-Duan; Kao, Hsien-Ming

    2014-12-01

    A new type of highly conductive organic-inorganic hybrid polymer electrolytes has been synthesized by the reaction of poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) bis(2-aminopropyl ether), 2,4,6-trichloro-1,3,5-triazine and alkoxysilane precursor 3-(glycidyloxypropyl)trimethoxysilane, followed by doping of LiClO4. The 13C and 29Si solid-sate NMR results confirm the successful synthesis of the organic-inorganic hybrid structure. The solid hybrid electrolyte thus obtained exhibits a maximum ionic conductivity of 1.6 × 10-4 S cm-1 at 30 °C, which is the highest among the organic-inorganic hybrid electrolytes. The hybrid electrolytes are electrochemically stable up to 4.2 V. The prototype electrochromic device with such a solid hybrid electrolyte demonstrates a good coloration efficiency value of 183 cm2 C-1 with a cycle life over 200 cycles. For the lithium-ion battery test, the salt free solid hybrid membrane is swelled with a LiPF6-containing electrolyte solution to reach an acceptable ionic conductivity value of 6.5 × 10-3 S cm-1 at 30 °C. The battery cell carries an initial discharge capacity of 100 mAh g-1 at 0.2C-rate and a coulombic efficiency of about 95% up to 30 cycles without the sign of cell failure. The present organic-inorganic hybrid electrolytes hold promise for applications in electrochromic devices and lithium ion batteries.

  12. Low-cost, high-efficiency organic/inorganic hetero-junction hybrid solar cells for next generation photovoltaic device

    NASA Astrophysics Data System (ADS)

    Pudasaini, P. R.; Ayon, A. A.

    2013-12-01

    Organic/inorganic hybrid structures are considered innovative alternatives for the next generation of low-cost photovoltaic devices because they combine advantages of the purely organic and inorganic versions. Here, we report an efficient hybrid solar cell based on sub-wavelength silicon nanotexturization in combination with the spin-coating of poly (3,4-ethylene-dioxythiophene):polystyrenesulfonate (PEDOT:PSS). The described devices were analyzed by collecting current-voltage and capacitance-voltage measurements in order to explore the organic/inorganic heterojunction properties. ALD deposited ultrathin aluminium oxide was used as a junction passivation layer between the nanotextured silicon surface and the organic polymer. The measured interface defect density of the device was observed to decrease with the inclusion of an ultrathin Al2O3 passivation layer leading to an improved electrical performance. This effect is thought to be ascribed to the suppression of charge recombination at the organic/inorganic interface. A maximum power conversion efficiency in excess of 10% has been achieved for the optimized geometry of the device, in spite of lacking an antireflection layer or back surface field enhancement schemes.

  13. Temperature and exposure dependence of hybrid organic-inorganic layer formation by sequential vapor infiltration into polymer fibers.

    PubMed

    Akyildiz, Halil I; Padbury, Richard P; Parsons, Gregory N; Jur, Jesse S

    2012-11-06

    The characteristic processing behavior for growth of a conformal nanoscale hybrid organic-inorganic modification to polyamide 6 (PA6) by sequential vapor infiltration (SVI) is demonstrated. The SVI process is a materials growth technique by which exposure of organometallic vapors to a polymeric material promotes the formation of a hybrid organic-inorganic modification at the near surface region of the polymer. This work investigates the SVI exposure temperature and cycling times of sequential exposures of trimethylaluminum (TMA) on PA6 fiber mats. The result of TMA exposure is the preferential subsurface organic-inorganic growth by diffusion into the polymer and reaction with the carbonyl in PA6. Mass gain, infrared spectroscopy, and transmission electron microscopy analysis indicate enhanced materials growth and uniformity at lower processing temperatures. The inverse relationship between mass gain and exposure temperature is explained by the formation of a hybrid layer that prevents the diffusion of TMA into the polymer to react with the PA6 upon subsequent exposure cycles. As few as 10 SVI exposure cycles are observed to saturate the growth, yielding a modified thickness of ∼75 nm and mass increase of ∼14 wt %. Removal of the inherent PA6 moisture content reduces the mass gain by ∼4 wt % at low temperature exposures. The ability to understand the characteristic growth process is critical for the development of the hybrid materials fabrication and modification techniques.

  14. Toward High-Performance Organic-Inorganic Hybrid Solar Cells: Bringing Conjugated Polymers and Inorganic Nanocrystals in Close Contact.

    PubMed

    He, Ming; Qiu, Feng; Lin, Zhiqun

    2013-06-06

    Organic-inorganic hybrid solar cells composed of conjugated polymers (CPs) and inorganic nanocrystal (NC) semiconductors have garnered considerable attention as a potential alternative to traditional silicon solar cells due to the capacity of producing high-efficiency solar energy in a cost-effective manner. The combination of advantageous characteristics of CPs and NCs enables the construction of nanostructured high-performance, lightweight, flexible, large-area, and low-cost hybrid solar cells. However, it remains a grand challenge to control the film morphology and interfacial structure of such organic/inorganic semiconductor blends on the nanoscale. In this Perspective, we highlight the strategies of implementing close contact between CPs and NCs by tailoring the colloidal synthesis, the coordination reaction, and the chemical modification of CPs. As such, they offer promising opportunities for rationally controlling the phase separation between electron-donating CPs and electron-accepting NCs, increasing the interfacial areas between them, enhancing their electronic interaction, and thus substantially promoting the photovoltaic performance of the resulting organic-inorganic hybrid solar cells.

  15. Oligomer functionalized nanotubes and composites formed therewith

    DOEpatents

    Zettl, Alexander K; Sainsbury, Toby; Frechet, Jean M.J.

    2014-03-18

    Disclosed herein is a sequential functionalization methodology for the covalent modification of nanotubes with between one and four repeat units of a polymer. Covalent attachment of oligomer units to the surface of nanotubes results in oligomer units forming an organic sheath around the nanotubes, polymer-functionalized-nanotubes (P-NTs). P-NTs possess chemical functionality identical to that of the functionalizing polymer, and thus provide nanoscale scaffolds which may be readily dispersed within a monomer solution and participate in the polymerization reaction to form a polymer-nanotube/polymer composite. Formation of polymer in the presence of P-NTs leads to a uniform dispersion of nanotubes within the polymer matrix, in contrast to aggregated masses of nanotubes in the case of pristine-NTs. The covalent attachment of oligomeric units to the surface of nanotubes represents the formation of a functional nanoscale building block which can be readily dispersed and integrated within the polymer to form a novel composite material.

  16. Computation of liquid-liquid equilibria and phase stabilities: implications for RH-dependent gas/particle partitioning of organic-inorganic aerosols

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Peter, T.; Seinfeld, J. H.

    2010-08-01

    Semivolatile organic and inorganic aerosol species partition between the gas and aerosol particle phases to maintain thermodynamic equilibrium. Liquid-liquid phase separation into an organic-rich and an aqueous electrolyte phase can occur in the aerosol as a result of the salting-out effect. Such liquid-liquid equilibria (LLE) affect the gas/particle partitioning of the different semivolatile compounds and might significantly alter both particle mass and composition as compared to a one-phase particle. We present a new liquid-liquid equilibrium and gas/particle partitioning model, using as a basis the group-contribution model AIOMFAC (Zuend et al., 2008). This model allows the reliable computation of the liquid-liquid coexistence curve (binodal), corresponding tie-lines, the limit of stability/metastability (spinodal), and further thermodynamic properties of multicomponent systems. Calculations for ternary and multicomponent alcohol/polyol-water-salt mixtures suggest that LLE are a prevalent feature of organic-inorganic aerosol systems. A six-component polyol-water-ammonium sulphate system is used to simulate effects of relative humidity (RH) and the presence of liquid-liquid phase separation on the gas/particle partitioning. RH, salt concentration, and hydrophilicity (water-solubility) are identified as key features in defining the region of a miscibility gap and govern the extent to which compound partitioning is affected by changes in RH. The model predicts that liquid-liquid phase separation can lead to either an increase or decrease in total particulate mass, depending on the overall composition of a system and the particle water content, which is related to the hydrophilicity of the different organic and inorganic compounds. Neglecting non-ideality and liquid-liquid phase separations by assuming an ideal mixture leads to an overestimation of the total particulate mass by up to 30% for the composition and RH range considered in the six-component system

  17. Computation of liquid-liquid equilibria and phase stabilities: implications for RH-dependent gas/particle partitioning of organic-inorganic aerosols

    NASA Astrophysics Data System (ADS)

    Zuend, A.; Marcolli, C.; Peter, T.; Seinfeld, J. H.

    2010-05-01

    Semivolatile organic and inorganic aerosol species partition between the gas and aerosol particle phases to maintain thermodynamic equilibrium. Liquid-liquid phase separation into an organic-rich and an aqueous electrolyte phase can occur in the aerosol as a result of the salting-out effect. Such liquid-liquid equilibria (LLE) affect the gas/particle partitioning of the different semivolatile compounds and might significantly alter both particle mass and composition as compared to a one-phase particle. We present a new liquid-liquid equilibrium and gas/particle partitioning model, using as a basis the group-contribution model AIOMFAC (Zuend et al., 2008). This model allows the reliable computation of the liquid-liquid coexistence curve (binodal), corresponding tie-lines, the limit of stability/metastability (spinodal), and further thermodynamic properties of the phase diagram. Calculations for ternary and multicomponent alcohol/polyol-water-salt mixtures suggest that LLE are a prevalent feature of organic-inorganic aerosol systems. A six-component polyol-water-ammonium sulphate system is used to simulate effects of relative humidity (RH) and the presence of liquid-liquid phase separation on the gas/particle partitioning. RH, salt concentration, and hydrophilicity (water-solubility) are identified as key features in defining the region of a miscibility gap and govern the extent to which compound partitioning is affected by changes in RH. The model predicts that liquid-liquid phase separation can lead to either an increase or decrease in total particulate mass, depending on the overall composition of a system and the particle water content, which is related to the hydrophilicity of the different organic and inorganic compounds. Neglecting non-ideality and liquid-liquid phase separations by assuming an ideal mixture leads to an overestimation of the total particulate mass by up to 30% for the composition and RH range considered in the six-component system simulation

  18. Synthesis and Properties of Cellulose-Functionalized POSS-SiO2/TiO2 Hybrid Composites.

    PubMed

    Hong, Gwang-Wook; Ramesh, Sivalingam; Kim, Joo-Hyung; Kim, Hyeon-Ju; Lee, Ho-Saeng

    2015-10-01

    The mechanical, thermal, optical, electrical and morphological properties of cellulose, an excellent natural biomaterial, can be improved by organic-inorganic hybrid composite methods. Based on the pristine properties of cellulose, the preparation of cellulose-metal oxide hybrid nanocomposites using a dispersion process of nanoparticles into the cellulose host matrix by traditional methods, has limitations. Recently, the functionalized cellulose-polymer-based materials were considered to be an important class of high-performance materials, providing the synthesis of various functional hybrid nanocomposites using a sol-gel method. Transparent cellulose-POSS-amine-silica/titania hybrids were prepared by an in-situ sol-gel process in the presence of γ-aminopropyltrimethoxylsilane (γ-APTES). The methodology involves the formation of covalent bonding between the cellulose-POSS amine and SiO2/TiO2 hybrid nanocomposite material. An analysis of the synthesized hybrid material by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, differential thermal calorimetry, scanning electron microscopy, and transmission electron microscopy indicated that the silica/titania nanoparticles were bonded covalently and dispersed uniformly into the cellulose-POSS amine matrix. In addition, biological properties of the cellulose-POSS-silica/titania hybrid material were examined using an antimicrobial test against pathogenic bacteria, such as Bacillus cereus (F481072) and E. coli (ATCC35150) for the bacterial effect.

  19. Single-crystalline organic-inorganic layered cobalt hydroxide nanofibers: facile synthesis, characterization, and reversible water-induced structural conversion.

    PubMed

    Guo, Xiaodi; Wang, Lianying; Yue, Shuang; Wang, Dongyang; Lu, Yanluo; Song, Yufei; He, Jing

    2014-12-15

    New pink organic-inorganic layered cobalt hydroxide nanofibers intercalated with benzoate ions [Co(OH)(C6H5COO)·H2O] have been synthesized by using cobalt nitrate and sodium benzoate as reactants in water with no addition of organic solvent or surfactant. The high-purity nanofibers are single-crystalline in nature and very uniform in size with a diameter of about 100 nm and variable lengths over a wide range from 200 μm down to 2 μm by simply adjusting reactant concentrations. The as-synthesized products are well-characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), fast Fourier transforms (FFT), X-ray diffraction (XRD), energy dispersive X-ray spectra (EDX), X-ray photoelectron spectra (XPS), elemental analysis (EA), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), and UV-vis diffuse reflectance spectra (UV-vis). Our results demonstrate that the structure consists of octahedral cobalt layers and the benzoate anions, which are arranged in a bilayer due to the π-π stacking of small aromatics. The carboxylate groups of benzoate anions are coordinated to Co(II) ions in a strong bridging mode, which is the driving force for the anisotropic growth of nanofibers. When NaOH is added during the synthesis, green irregular shaped platelets are obtained, in which the carboxylate groups of benzoate anions are coordinated to the Co(II) ions in a unidentate fashion. Interestingly, the nanofibers exhibit a reversible transformation of the coordination geometry of the Co(II) ions between octahedral and pseudotetrahedral with a concomitant color change between pink and blue, which involves the loss and reuptake of unusual weakly coordinated water molecules without destroying the structure. This work offers a facile, cost-effective, and green strategy to rationally design and synthesize functional nanomaterials for future applications in catalysis, magnetism

  20. Characteristics of oxidative homolytic alkylation of imidazoles and organic-inorganic hybrid extended networks from large aromatic building blocks

    NASA Astrophysics Data System (ADS)

    Li, Kunhao

    The discovery of the dramatic in vitro antimalarial activity of 2-iodo-L-histidine and 2-fluoro-L-histidine, as well as their in vivo limitations, has prompted a systematic search for novel 2-substituted imidazoles and bioimidazoles as agents against human malaria. Previous research has shown that the regioselective alkyl free radical substitution on imidazoles and bioimidazoles could serve as a simple and efficient route to a wide variety of 2-alkylimidazoles. In this research, this methodology was successfully extended to include alkyl radicals substituted with various functional groups such as amide or ester. While this novel methodology should be of some synthetic utility when tertiary radicals are used, poorer yields are usually encountered in the cases of primary radicals. In the second part of this dissertation, a series of novel ligands containing multiple ortho-bis(organothio) groups were synthesized and their coordination and network forming properties were studied in the context of crystalline organic-inorganic hybrid extended networks. For the syntheses of HRTTs [2,3,6,7,10,11-hexakis(alkylthio)triphenylenes], a simpler, safer and higher yielding one-pot process was developed. Quenching the hexa-anions (formed when sodium methylthiolate was refluxed with hexabromotriphenylene) with alkyl halides or acid chlorides afforded HRTTs. This newly developed process was also successfully expanded to the pyrene system. In the syntheses of unsymmetrically substituted triphenlyenes, it was shown for the first time that the oxidative cyclization process is applicable to thioether containing systems, pointing to a novel strategy for the preparation of this type of unsymmetrically substituted triphenlyenes. Treating these novel ligands with various metal salts [i.e. bismuth(III) chloride and bismuth(III) bromide] under carefully controlled conditions resulted in a series of air-stable semiconductive coordination networks. Their single crystal structures were

  1. Electronic, structural and chemical effects of charge-transfer at organic/inorganic interfaces

    NASA Astrophysics Data System (ADS)

    Otero, R.; Vázquez de Parga, A. L.; Gallego, J. M.

    2017-07-01

    reactivity of the adsorbates. The aim of this review is to start drawing general conclusions and developing new concepts which will help the scientific community to proceed more efficiently towards the understanding of organic/inorganic interfaces in the strong interaction limit, where charge-transfer effects must be taken into consideration.

  2. Universality of composite functions of periodic zeta functions

    SciTech Connect

    Laurincikas, Antanas P

    2012-11-30

    In the paper, we prove the universality, in the sense of Voronin, for some classes of composite functions F({zeta}(s;a)), where the function {zeta}(s;a) is defined by a Dirichlet series with periodic multiplicative coefficients. We also study the universality of functions of the form F({zeta}(s;a{sub 1}),...,{zeta}(s;a{sub r})). For example, it follows from general theorems that every linear combination of derivatives of the function {zeta}(s;a) and every linear combination of the functions {zeta}(s;a{sub 1}),...,{zeta}(s;a{sub r}) are universal. Bibliography: 18 titles.

  3. Organic-Inorganic Hybrid Ternary Bulk Heterojunction of Nanostructured Perovskite-Low Bandgap Polymer-PCBM for Improved Efficiency of Organic Solar Cells.

    PubMed

    Jeong, Hanbin; Lee, Jae Kwan

    2015-12-30

    A new organic-inorganic ternary bulk heterojunction (TBHJ) hybrid configuration comprised of nanostructured (CH3)3NHPbI3 (MAPbI3) perovskite-low bandgap PCPDTBT-PCBM was investigated. Well-organized TBHJ films were readily prepared by sequential spin-casting of sparsely covered MAPbI3 nano dots and PCPDTBT-PCBM bulk heterojunction (BHJ) composites on ITO/PEDOT:PSS substrates. The TBHJ hybrid device configuration comprising diiooctane (DIO) treated MAPbI3 perovskite nano dots and a PCPDTBT-PCBM BHJ composite processed with DIO additive exhibited excellent performances. The DIO additive played a key role in developing perovskite structures of MAPbI3 nano dots and induced the (110) directional crystallinity growth of longitudinal constructive morphologies such as nano rods. The improved photocurrent and fill factor compared to those of conventional BHJ devices led to an increase in efficiency of ∼28%. This improved photovoltaic performance originated from the higher quantum efficiencies contributed by the charge transfer from nanostructured MAPbI3 perovskite to PCBM. These TBHJs composed of nanostructured MAPbI3 perovskite, PCPDTBT, and PCBM also facilitated the exciton dissociation in the multi-BHJ system between MAPbI3 perovskite, PCPDTBT, and PCBM.

  4. Synthesis and characterization of a new layered organic-inorganic hybrid nickel(II) 1,4:5,8-naphthalenediimide bis-phosphonate, exhibiting canted antiferromagnetism, with T{sub c}{approx}21 K

    SciTech Connect

    Bauer, Elvira M. Bellitto, Carlo; Gomez Garcia, Carlos J. Righini, Guido

    2008-05-15

    A new Ni(II) layered hybrid organic-inorganic compound of formula Ni{sub 2}[(NDI-BP)(H{sub 2}O){sub 2}].2H{sub 2}O has been prepared in very mild conditions from N,N'-bis(2-phosphonoethyl)napthalene-1,4:5,8-tetracarboximide (NDI-BP ligand) and NiCl{sub 2}. The X-ray powder structure characterization of the title compound suggests a pillared layered organic-inorganic hybrid structure. The distance between the organic and inorganic layers has been found to be 17.8 A. The inorganic layers consist of corner sharing [NiO{sub 5}(H{sub 2}O)] octahedra and they are pillared by the diphosphonate groups. DC and AC magnetic measurements as a function of temperature and field indicate the presence of 2D antiferromagnetic exchange interactions between the nearest-neighbor Ni(II) ions below 100 K. A long-range magnetic ordering at T{sub c}{approx}21 K has been established and is attributed to the presence of spin canting. AC magnetic measurements as a function of temperature at different frequencies confirm the occurrence of the magnetic ordering temperature at T=21 K and the presence of a slight structural disorder in the title compound. - Graphical abstract: A new layered hybrid organic-inorganic Ni(II) N,N'-bis(2-phosphonoethyl)-naphthalene 1,4:5,8 tetracarboxydiimide complex has been synthesized and characterized. Magnetic measurements as a function of temperature and at different fields show that the compound is magnetically ordered below T{sub c}{approx}21 K.

  5. Dialysis Modalities and HDL Composition and Function

    PubMed Central

    Holzer, Michael; Schilcher, Gernot; Curcic, Sanja; Trieb, Markus; Ljubojevic, Senka; Stojakovic, Tatjana; Scharnagl, Hubert; Kopecky, Chantal M.; Rosenkranz, Alexander R.; Heinemann, Akos

    2015-01-01

    Lipid abnormalities may have an effect on clinical outcomes of patients on dialysis. Recent studies have indicated that HDL dysfunction is a hallmark of ESRD. In this study, we compared HDL composition and metrics of HDL functionality in patients undergoing hemodialysis (HD) or peritoneal dialysis (PD) with those in healthy controls. We detected a marked suppression of several metrics of HDL functionality in patients on HD or PD. Compositional analysis revealed that HDL from both dialysis groups shifted toward a more proinflammatory phenotype with profound alterations in the lipid moiety and protein composition. With regard to function, cholesterol efflux and anti-inflammatory and antiapoptotic functions seemed to be more severely suppressed in patients on HD, whereas HDL-associated paraoxonase activity was lowest in patients on PD. Quantification of enzyme activities involved in HDL metabolism suggested that HDL particle maturation and remodeling are altered in patients on HD or PD. In summary, our study provides mechanistic insights into the formation of dysfunctional HDL in patients with ESRD who are on HD or PD. PMID:25745027

  6. Functionally Graded Nanophase Beryllium/Carbon Composites

    NASA Technical Reports Server (NTRS)

    Choi, Michael K.

    2003-01-01

    Beryllium, beryllium alloys, beryllium carbide, and carbon are the ingredients of a class of nanophase Be/Be2C/C composite materials that can be formulated and functionally graded to suit a variety of applications. In a typical case, such a composite consists of a first layer of either pure beryllium or a beryllium alloy, a second layer of B2C, and a third layer of nanophase sintered carbon derived from fullerenes and nanotubes. The three layers are interconnected through interpenetrating spongelike structures. These Be/Be2C/C composite materials are similar to Co/WC/diamond functionally graded composite materials, except that (1) W and Co are replaced by Be and alloys thereof and (2) diamond is replaced by sintered carbon derived from fullerenes and nanotubes. (Optionally, one could form a Be/Be2C/diamond composite.) Because Be is lighter than W and Co, the present Be/Be2C/C composites weigh less than do the corresponding Co/WC/diamond composites. The nanophase carbon is almost as hard as diamond. WC/Co is the toughest material. It is widely used for drilling, digging, and machining. However, the fact that W is a heavy element (that is, has high atomic mass and mass density) makes W unattractive for applications in which weight is a severe disadvantage. Be is the lightest tough element, but its toughness is less than that of WC/Co alloy. Be strengthened by nanophase carbon is much tougher than pure or alloy Be. The nanophase carbon has an unsurpassed strength-to-weight ratio. The Be/Be2C/C composite materials are especially attractive for terrestrial and aerospace applications in which there are requirements for light weight along with the high strength and toughness of the denser Co/WC/diamond materials. These materials could be incorporated into diverse components, including cutting tools, bearings, rocket nozzles, and shields. Moreover, because Be and C are effective as neutron moderators, Be/Be2C/C composites could be attractive for some nuclear applications.

  7. Antibacterial activity of plastics coated with silver-doped organic-inorganic hybrid coatings prepared by sol-gel processes.

    PubMed

    Marini, M; De Niederhausern, S; Iseppi, R; Bondi, M; Sabia, C; Toselli, M; Pilati, F

    2007-04-01

    Silver-doped organic-inorganic hybrid coatings were prepared starting from tetraethoxysilane- and triethoxysilane-terminated poly(ethylene glycol)-block-polyethylene by the sol-gel process. They were applied as a thin layer (0.6-1.1 microm) to polyethylene (PE) and poly(vinyl chloride) (PVC) films and the antibacterial activity of the coated films was tested against Gram-negative (Escherichia coli ATCC 25922) and Gram-positive (Staphylococcus aureus ATCC 6538) bacteria. The effect of several factors (such as organic-inorganic ratio, type of catalyst, time of post-curing, silver ion concentration, etc.) was investigated. Measurements at different contact times showed a rapid decrease of the viable count for both tested strains. The highest antibacterial activity [more than 6 log reduction within 6 h starting from 106 colony-forming units (cfu) mL-1] was obtained for samples with an organic-inorganic weight ratio of 80:20 and 5 wt % silver salt with respect to the coating. For the coatings prepared by an acid-catalyzed process, a high level of permanence of the antibacterial activity of the coated films was demonstrated by repeatedly washing the samples in warm water or by immersion in physiological saline solution at 37 degrees C for 3 days. The release of silver ions per square meter of coating is very similar to that previously observed for polyamides filled with metallic silver nanoparticles; however, when compared on the basis of Ag content, the concentration of silver ions released from the coating is much higher than that released from 1 mm thick specimens of polyamide (PA) filled with silver nanoparticles. Transparency and good adhesion of the coating to PE and PVC plastic substrates without any previous surface treatment are further interesting features.

  8. A stable organic-inorganic hybrid layer protected lithium metal anode for long-cycle lithium-oxygen batteries

    NASA Astrophysics Data System (ADS)

    Zhu, Jinhui; Yang, Jun; Zhou, Jingjing; Zhang, Tao; Li, Lei; Wang, Jiulin; Nuli, Yanna

    2017-10-01

    A stable organic-inorganic hybrid layer (OIHL) is direct fabricated on lithium metal surface by the interfacial reaction of lithium metal foil with 1-chlorodecane and oxygen/carbon dioxide mixed gas. This favorable OIHL is approximately 30 μm thick and consists of lithium alkyl carbonate and lithium chloride. The lithium-oxygen batteries with OIHL protected lithium metal anode exhibit longer cycle life (340 cycles) than those with bare lithium metal anode (50 cycles). This desirable performance can be ascribed to the robust OIHL which prevents the growth of lithium dendrites and the corrosion of lithium metal.

  9. Research Update: Hybrid organic-inorganic perovskite (HOIP) thin films and solar cells by vapor phase reaction

    NASA Astrophysics Data System (ADS)

    Shen, Po-Shen; Chiang, Yu-Hsien; Li, Ming-Hsien; Guo, Tzung-Fang; Chen, Peter

    2016-09-01

    With the rapid progress in deposition techniques for hybrid organic-inorganic perovskite (HOIP) thin films, this new class of photovoltaic (PV) technology has achieved material quality and power conversion efficiency comparable to those established technologies. Among the various techniques for HOIP thin films preparation, vapor based deposition technique is considered as a promising alternative process to substitute solution spin-coating method for large-area or scale-up preparation. This technique provides some unique benefits for high-quality perovskite crystallization, which are discussed in this research update.

  10. Multi-enzyme co-embedded organic-inorganic hybrid nanoflowers: synthesis and application as a colorimetric sensor

    NASA Astrophysics Data System (ADS)

    Sun, Jiayu; Ge, Jiechao; Liu, Weimin; Lan, Minhua; Zhang, Hongyan; Wang, Pengfei; Wang, Yanming; Niu, Zhongwei

    2013-12-01

    This study reports a facile method for the synthesis of multi-enzyme co-embedded organic-inorganic hybrid nanoflowers, using glucose oxidase (GOx) and horseradish peroxidase (HRP) as the organic components, and Cu3(PO4)2.3H2O as the inorganic component. The synthesized nanoflowers enable the combination of a two-enzyme cascade reaction in one step, in which the GOx component of the nanoflowers oxidizes glucose to generate H2O2, which then reacts with the adjacent HRP component on the nanoflowers to oxidize the chromogenic substrates, resulting in an apparent color change. Given the close proximity of the two enzyme components in a single nanoflower, this novel sensor greatly reduces the diffusion and decomposition of H2O2, and greatly enhances the sensitivity of glucose detection. Thus, the obtained multi-enzyme co-embedded organic-inorganic hybrid nanoflowers can be unquestionably used as highly sensitive colorimetric sensors for the detection of glucose. Notably, this work presents a very facile route for the synthesis of multi-enzyme co-embedded nanomaterials for the simultaneous catalysis of multi-step cascade enzymatic reactions. Furthermore, it has great potential for application in biotechnology, and biomedical and environmental chemistry.This study reports a facile method for the synthesis of multi-enzyme co-embedded organic-inorganic hybrid nanoflowers, using glucose oxidase (GOx) and horseradish peroxidase (HRP) as the organic components, and Cu3(PO4)2.3H2O as the inorganic component. The synthesized nanoflowers enable the combination of a two-enzyme cascade reaction in one step, in which the GOx component of the nanoflowers oxidizes glucose to generate H2O2, which then reacts with the adjacent HRP component on the nanoflowers to oxidize the chromogenic substrates, resulting in an apparent color change. Given the close proximity of the two enzyme components in a single nanoflower, this novel sensor greatly reduces the diffusion and decomposition of H2O2

  11. Nanofiber Composite Membranes for Alkaline Fuel Cells: Generation of Compositional, Morphological, and Functional Property Relationships

    DTIC Science & Technology

    2015-12-01

    Approved for Public Release; Distribution Unlimited Final Report: Nanofiber Composite Membranes for Alkaline Fuel Cells: Generation of Compositional...Nanofiber Composite Membranes for Alkaline Fuel Cells: Generation of Compositional, Morphological, and Functional Property Relationships...and carefully measured compositions and nanofiber morphologies. From these membranes, fundamental structure/function relationships will be generated

  12. High-Efficiency Phosphorescent Hybrid Organic-Inorganic Light-Emitting Diodes Using a Solution-Processed Small-Molecule Emissive Layer.

    PubMed

    Fan, Changjun; Lei, Yong; Liu, Zhen; Wang, Ruixue; Lei, Yanlian; Li, Guoqing; Xiong, Zuhong; Yang, Xiaohui

    2015-09-23

    The morphology and optical and electrical properties of solution-processed and vacuum-deposited 4,4',4″-tris(carbazol-9-yl)triphenylamine (TCTA):2,2'-(1,3-phenylene)bis[5-(4-tert-butylphenyl)-1,3,4-oxadiazole] (OXD-7) composite films are investigated. All of the films exhibit smooth and pinhole-free morphology, while the evaporated films possess enhanced carrier-transport properties compared to solution-processed ones. The close correlation between the carrier-transport feature and the packing density of the film is established. High-efficiency monochromatic and white phosphorescent hybrid organic-inorganic light-emitting diodes with solution-processed small-molecule emissive layers are reported: the maximum external quantum efficiencies of blue, yellow, and red devices are 18.9, 14.6, and 10.2%, respectively; white devices show a maximum luminance efficiency of 40 cd A(-1) and a power efficiency of 20.8 lm W(-1) at 1000 cd m(-2). The efficiencies of blue, red, and white devices represent significant improvement over previously reported values.

  13. Preparation of organic-inorganic hybrid silica monolith with octyl and sulfonic acid groups for capillary electrochromatograhpy and application in determination of theophylline and caffeine in beverage.

    PubMed

    Chen, Ming-Luan; Zheng, Ming-Ming; Feng, Yu-Qi

    2010-05-21

    An organic-inorganic hybrid silica monolithic column with octyl and sulfonic acid groups has been prepared by sol-gel technique for capillary electrochromatograhpy. The structure of hybrid monolith was optimized by changing the composition of tetraethoxysilane (TEOS), octyltriethoxysilane (C(8)-TEOS) and 3-mercaptopropyltrimethoxysilane (MPTMS) in the mixture of precursors. Then, the obtained hybrid monolith was oxidized using hydrogen peroxide (30%, w/w) to yield sulfonic acid groups. The sulfonic acid group, which served as strong cation-exchanger, dominated the charge on the surface of the capillary column and generated stable electroosmotic flow (EOF) in a wide range of pH. The monolithic column was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and elemental analysis (EA), and the performance of column was evaluated in detail by separating different kinds of compounds with column efficiency up to 155,000 plates/m for thiourea. In addition, this monolithic column was also applied in the analysis of theophylline (TP) and caffeine (CA) in beverages. The detection limits were 0.39 and 0.48 microg/mL for theophylline and caffeine, respectively. The method reproducibility was tested by evaluating the intra- and inter-day precisions, and relative standard deviations of less than 3.9 and 8.4%, respectively, were obtained. Recoveries of compounds from spiked beverage samples ranged from 87.2 to 105.2%. 2010 Elsevier B.V. All rights reserved.

  14. Synthesis, Multinuclear NMR Characterization and Dynamic Property of Organic-Inorganic Hybrid Electrolyte Membrane Based on Alkoxysilane and Poly(oxyalkylene) Diamine.

    PubMed

    Saikia, Diganta; Pan, Yu-Chi; Kao, Hsien-Ming

    2012-06-13

    Organic-inorganic hybrid electrolyte membranes based on poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) bis(2-aminopropyl ether) complexed with LiClO4 via the co-condensation of tetraethoxysilane (TEOS) and 3-(triethoxysilyl)propyl isocyanate have been prepared and characterized. A variety of techniques such as differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, alternating current (AC) impedance and solid-state nuclear magnetic resonance (NMR) spectroscopy are performed to elucidate the relationship between the structural and dynamic properties of the hybrid electrolyte and the ion mobility. A VTF (Vogel-Tamman-Fulcher)-like temperature dependence of ionic conductivity is observed for all the compositions studied, implying that the diffusion of charge carriers is assisted by the segmental motions of the polymer chains. A maximum ionic conductivity value of 5.3 × 10-5 Scm-1 is obtained at 30 °C. Solid-state NMR results provide a microscopic view of the effects of salt concentrations on the dynamic behavior of the polymer chains.

  15. Preparation of hybrid organic-inorganic mesoporous silicas applied to mercury removal from aqueous media: Influence of the synthesis route on adsorption capacity and efficiency.

    PubMed

    Pérez-Quintanilla, Damián; Sánchez, Alfredo; Sierra, Isabel

    2016-06-15

    New hybrid organic-inorganic mesoporous silicas were prepared by employing three different synthesis routes and mercury adsorption studies were done in aqueous media using the batch technique. The organic ligands employed for the functionalization were derivatives of 2-mercaptopyrimidine or 2-mercaptothiazoline, and the synthesis pathways used were post-synthesis, post-synthesis with surface ion-imprinting and co-condensation with ion-imprinting. The incorporation of functional groups and the presence of ordered mesopores in the organosilicas was confirmed by XRD, TEM and SEM, nitrogen adsorption-desorption isotherms, (13)C MAS-NMR, (29)Si MAS-NMR, elemental and thermogravimetric analysis. The highest adsorption capacity and selectivity observed was for the material functionalized with 2-mercaptothiazoline ligand by means the co-condensation with ion-imprinting route (1.03 mmol g(-1) at pH 6). The prepared material could be potential sorbent for the extraction of this heavy metal from environmental and drinking waters.

  16. Evidence of organic-inorganic interactions during thermal maturation of vitrinite: Constraints from hydrothermal experiments

    SciTech Connect

    Eglinton, L.B.; Ong, Yea-Ling; Seewald, J.S.

    1996-10-01

    A series of hydrothermal experiments were conducted to determine the role of aqueous fluid chemistry during the development of vitrinite reflectance in subsurface environments. Samples of Wyodak Coal (90% vitrinite) and unconsolidated sediment from Middle Valley, northern Juan de Fuca Ridge were heated at 225 to 375{degrees}C at 350 bars with a variety of fluid compositions of varying pH, fS{sub 2} and redox. The n-alkane and aromatic hydrocarbon distributions in generated bitumen and loss of phenols in residual vitrinite were monitored in all experiments to allow correlation of chemical transformations with the development of vitrinite reflectance. The results suggest that vitrinite maturation is enhanced by increased levels of dissolved sulfur species in intermediate oxidation states. Theoretical calculations indicate that the absolute abundance and relative distribution of dissolved sulfur species are sensitive functions of fluid pH and redox. These results may account for some commonly observed fluctuations in vitrinite maturation and suggest that kinetic models used to predict the evolution of vitrinite reflectance may need to account for subsurface chemical environments in addition to time and temperature.

  17. Multi-enzyme co-embedded organic-inorganic hybrid nanoflowers: synthesis and application as a colorimetric sensor.

    PubMed

    Sun, Jiayu; Ge, Jiechao; Liu, Weimin; Lan, Minhua; Zhang, Hongyan; Wang, Pengfei; Wang, Yanming; Niu, Zhongwei

    2014-01-07

    This study reports a facile method for the synthesis of multi-enzyme co-embedded organic-inorganic hybrid nanoflowers, using glucose oxidase (GOx) and horseradish peroxidase (HRP) as the organic components, and Cu3(PO4)2 · 3H2O as the inorganic component. The synthesized nanoflowers enable the combination of a two-enzyme cascade reaction in one step, in which the GOx component of the nanoflowers oxidizes glucose to generate H2O2, which then reacts with the adjacent HRP component on the nanoflowers to oxidize the chromogenic substrates, resulting in an apparent color change. Given the close proximity of the two enzyme components in a single nanoflower, this novel sensor greatly reduces the diffusion and decomposition of H2O2, and greatly enhances the sensitivity of glucose detection. Thus, the obtained multi-enzyme co-embedded organic-inorganic hybrid nanoflowers can be unquestionably used as highly sensitive colorimetric sensors for the detection of glucose. Notably, this work presents a very facile route for the synthesis of multi-enzyme co-embedded nanomaterials for the simultaneous catalysis of multi-step cascade enzymatic reactions. Furthermore, it has great potential for application in biotechnology, and biomedical and environmental chemistry.

  18. Quasiparticle band gap of organic-inorganic hybrid perovskites: Crystal structure, spin-orbit coupling, and self-energy effects

    NASA Astrophysics Data System (ADS)

    Gao, Weiwei; Gao, Xiang; Abtew, Tesfaye A.; Sun, Yi-Yang; Zhang, Shengbai; Zhang, Peihong

    2016-02-01

    The quasiparticle band gap is one of the most important materials properties for photovoltaic applications. Often the band gap of a photovoltaic material is determined (and can be controlled) by various factors, complicating predictive materials optimization. An in-depth understanding of how these factors affect the size of the gap will provide valuable guidance for new materials discovery. Here we report a comprehensive investigation on the band gap formation mechanism in organic-inorganic hybrid perovskites by decoupling various contributing factors which ultimately determine their electronic structure and quasiparticle band gap. Major factors, namely, quasiparticle self-energy, spin-orbit coupling, and structural distortions due to the presence of organic molecules, and their influences on the quasiparticle band structure of organic-inorganic hybrid perovskites are illustrated. We find that although methylammonium cations do not contribute directly to the electronic states near band edges, they play an important role in defining the band gap by introducing structural distortions and controlling the overall lattice constants. The spin-orbit coupling effects drastically reduce the electron and hole effective masses in these systems, which is beneficial for high carrier mobilities and small exciton binding energies.

  19. Organic-inorganic hybrid superhydrophobic surfaces using methyltriethoxysilane and tetraethoxysilane sol-gel derived materials in emulsion

    NASA Astrophysics Data System (ADS)

    Wen, Xiu-Fang; Wang, Kun; Pi, Pi-Hui; Yang, Jin-Xin; Cai, Zhi-Qi; Zhang, Li-juan; Qian, Yu; Yang, Zhuo-Ru; Zheng, Da-feng; Cheng, Jiang

    2011-11-01

    By applying alkaline-catalyzed co-hydrolysis and copolycondensation reactions of tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) in organic siloxane modified polyacrylate emulsion (OSPA emulsion), we are able to demonstrate the potential for developing a sol-gel derived organic-inorganic hybrid emulsion for a superhydrophobic surface research. TEOS and MTES derived sol-gel moieties can be designed for a physical roughness and hydrophobic characteristic (Si-CH3) of the hybrid superhydrophobic surface, while OSPA emulsion can be endowed for good film-forming property. The effect of formulation parameters on superhydrophobicity and film-forming property was analyzed. The water contact angle (WCA) on the sol-gel derived hybrid film is determined to be 156°, and the contact angle hysteresis is 5° by keeping the mole ratio of TEOS:MTES:C2H5OH:NH3·H2O:AMP-95 at 1:4:30:10:0.63 and the mass percentage of OSPA emulsion at 25%. The nanoparticle-based silica rough surface is observed as the mole ratio of MTES/TEOS at 4:1. The sol-gel derived organic-inorganic hybrid emulsion shows remarkable film-forming property when the mole ratio of MTES/TEOS reaches or exceeds 4:1. With the primer coating, the performance of superhydrophobic film achieve actual use standard. It reveals that this new procedure is an effective shortcut to obtain a superhydrophobic surface with potential applications.

  20. High performance organic-inorganic perovskite-optocoupler based on low-voltage and fast response perovskite compound photodetector

    PubMed Central

    Li, Dong; Dong, Guifang; Li, Wenzhe; Wang, Liduo

    2015-01-01

    Organic-inorganic hybrid photodetectors attract considerable attention because they can combine the advantages of both organic and inorganic systems. Here, a perovskite compound with a broad absorption spectrum and high power conversion efficiency is used as a photosensitive layer in an organic/inorganic hybrid heterojunction photodetector with a high and fast response. The high sensitivity exceeding 104 is obtained at bias of 0–4 V. Using a tandem organic light-emitting diode (OLED) as the light source, we fabricated an optocoupler device. The optocoupler achieved a maximum photoresponsivity of 1.0 A W−1 at 341.3 μWcm−2 at an input voltage of 6 V. The device also exhibits rapid response times of τrise ~ 20 μs and τfall ~ 17 μs; as well as a high current transfer ratio (CTR) of 28.2%. After applying an amplification circuit, the CTR of the optocoupler increases to 263.3%, which is comparable with that of commercial inorganic optocouplers. The developed hybrid optocoupler thus shows great promise for use in photonics. PMID:25600830

  1. Functionalization of Artificial Freestanding Composite Nanomembranes

    PubMed Central

    Jakšić, Zoran; Matovic, Jovan

    2010-01-01

    Artificial nanomembranes may be defined as synthetic freestanding structures with a thickness below 100 nm and a very large aspect ratio, of at least a few orders of magnitude. Being quasi-2D, they exhibit a host of unusual properties useful for various applications in energy harvesting, sensing, optics, plasmonics, biomedicine, etc. We review the main approaches to nanomembrane functionalization through nanocompositing, which ensures performance far superior to that of simple nanomembranes. These approaches include lamination (stacking of nanometer-thin strata of different materials), introduction of nanoparticle fillers into the nanomembrane scaffold, nanomembrane surface sculpting and modification through patterning (including formation of nanohole arrays and introduction of ion channels similar in function to those in biological nanomembranes). We also present some of our original results related to functionalization of metal matrix composite nanomembranes.

  2. Optical properties and ab initio study on the hybrid organic-inorganic material [(CH 3) 2NH 2] 3[BiI 6

    NASA Astrophysics Data System (ADS)

    Samet, A.; Ahmed, A. Ben; Mlayah, A.; Boughzala, H.; Hlil, E. K.; Abid, Y.

    2010-08-01

    The tri (dimetylammonium) hexa-iodobismuthate of general formula [(CH 3) 2NH 2] 3[BiI 6] is an organic-inorganic hybrid material. The crystal lattice is composed of discrete [BiI 6] anions surrounded by dimethylamine cations. The X-ray diffraction pattern was obtained and indexed on the basis of rhombohedra unit cell with the R3¯ space group. Room temperature IR and Raman spectra of the title compound were recorded and analyzed. Semi-empirical Parameter Model three (PM3) method as well as density functional theory (DFT) calculations have been performed to derive the equilibrium geometry, vibrational wave numbers and a prediction of IR and Raman spectral activities. In this compound the bands corresponding to the cation vibrational modes show that the symmetry of these cations is distorted and they are strongly hydrogen bonded to the respective anions. The frontier molecular orbital and the energy gap between the highest occupied molecular orbital (HOMO) and the lowest un-occupied molecular orbital (LUMO) were calculated with time dependent density functional theory (TD-DFT). The results show good consistent with the experiment and confirm the contribution of metal orbital to the HOMO-LUMO boundary.

  3. Photoluminescent properties of novel rare earth organic-inorganic nanocomposite with TiO2 modified silica via double crosslinking units.

    PubMed

    Zhao, Yan; Yan, Bing

    2012-01-01

    A series of novel organic/inorganic rare earth (europium, terbium) hybrid materials through the coordination bond and covalent bond are synthesized and form an inorganic Si-O-Si by the sol-gel process. Mercapto-functionalized 4-mercaptobenzoic acid (MBA-Si) is obtained by using MBA and 3-(triethoxysilyl)-propyl isocyanate (TESPIC) as an organic bridge molecule, and then the carboxyl group of the precursor MBA-Si is used to modify the titanium dioxide, so as to sensitize the luminescence of rare earth ions. CdS-TiO(2) is added to observe the influence of photoluminescence. 3-mercaptopropyltrimethoxysilane (MPS) is also used to modify the CdS quantum dot and obtain MPS functionalized MPS-CdS nanocomposite. These multicomponent hybrids with double cross-linking siloxane (MBA-Si) covalently bonding MPS-CdS are characterized. Subsequently, 1,10-phenanthroline (Phen) and 2,2,-bipyridyl (Bipy) as the assistant ligands together with water molecules are introduced into the rare earth hybrid system. The FT-IR, X-ray diffraction, UV-Vis, thermogravimetry and especially the photoluminescence properties of them are studied in detail. © 2011 Wiley Periodicals, Inc. Photochemistry and Photobiology © 2011 The American Society of Photobiology.

  4. Origin of unusual bandgap shift and dual emission in organic-inorganic lead halide perovskites.

    PubMed

    Dar, M Ibrahim; Jacopin, Gwénolé; Meloni, Simone; Mattoni, Alessandro; Arora, Neha; Boziki, Ariadni; Zakeeruddin, Shaik Mohammed; Rothlisberger, Ursula; Grätzel, Michael

    2016-10-01

    Emission characteristics of metal halide perovskites play a key role in the current widespread investigations into their potential uses in optoelectronics and photonics. However, a fundamental understanding of the molecular origin of the unusual blueshift of the bandgap and dual emission in perovskites is still lacking. In this direction, we investigated the extraordinary photoluminescence behavior of three representatives of this important class of photonic materials, that is, CH3NH3PbI3, CH3NH3PbBr3, and CH(NH2)2PbBr3, which emerged from our thorough studies of the effects of temperature on their bandgap and emission decay dynamics using time-integrated and time-resolved photoluminescence spectroscopy. The low-temperature (<100 K) photoluminescence of CH3NH3PbI3 and CH3NH3PbBr3 reveals two distinct emission peaks, whereas that of CH(NH2)2PbBr3 shows a single emission peak. Furthermore, irrespective of perovskite composition, the bandgap exhibits an unusual blueshift by raising the temperature from 15 to 300 K. Density functional theory and classical molecular dynamics simulations allow for assigning the additional photoluminescence peak to the presence of molecularly disordered orthorhombic domains and also rationalize that the unusual blueshift of the bandgap with increasing temperature is due to the stabilization of the valence band maximum. Our findings provide new insights into the salient emission properties of perovskite materials, which define their performance in solar cells and light-emitting devices.

  5. Origin of unusual bandgap shift and dual emission in organic-inorganic lead halide perovskites

    PubMed Central

    Dar, M. Ibrahim; Jacopin, Gwénolé; Meloni, Simone; Mattoni, Alessandro; Arora, Neha; Boziki, Ariadni; Zakeeruddin, Shaik Mohammed; Rothlisberger, Ursula; Grätzel, Michael

    2016-01-01

    Emission characteristics of metal halide perovskites play a key role in the current widespread investigations into their potential uses in optoelectronics and photonics. However, a fundamental understanding of the molecular origin of the unusual blueshift of the bandgap and dual emission in perovskites is still lacking. In this direction, we investigated the extraordinary photoluminescence behavior of three representatives of this important class of photonic materials, that is, CH3NH3PbI3, CH3NH3PbBr3, and CH(NH2)2PbBr3, which emerged from our thorough studies of the effects of temperature on their bandgap and emission decay dynamics using time-integrated and time-resolved photoluminescence spectroscopy. The low-temperature (<100 K) photoluminescence of CH3NH3PbI3 and CH3NH3PbBr3 reveals two distinct emission peaks, whereas that of CH(NH2)2PbBr3 shows a single emission peak. Furthermore, irrespective of perovskite composition, the bandgap exhibits an unusual blueshift by raising the temperature from 15 to 300 K. Density functional theory and classical molecular dynamics simulations allow for assigning the additional photoluminescence peak to the presence of molecularly disordered orthorhombic domains and also rationalize that the unusual blueshift of the bandgap with increasing temperature is due to the stabilization of the valence band maximum. Our findings provide new insights into the salient emission properties of perovskite materials, which define their performance in solar cells and light-emitting devices. PMID:27819049

  6. Organic-inorganic hybrid compounds containing polyhedral oligomeric silsesquioxane for conservation of stone heritage.

    PubMed

    Son, Seunghwan; Won, Jongok; Kim, Jeong-Jin; Jang, Yun Deuk; Kang, Yong Soo; Kim, Sa Dug

    2009-02-01

    Alkoxysilane solutions based on tetraethoxysilane (TEOS) have been widely used for the consolidation of decaying heritage stone surfaces. TEOS-based products polymerize within the porous structure of the decaying stone, significantly increasing the cohesion of the grains of stone components. However, they suffer from practical drawbacks, such as crack formation of the gel during the drying phase due to the developing capillary force and dense gel fractures left inside of the stone. In this study, a TEOS-based stone consolidant containing functional (3-glycidoxypropyl)trimethoxysilane (GPTMS) and polyhedral oligomeric silsesquioxane (POSS) has been prepared in order to reduce gel crack formation during the drying phase. The addition of nanometer-sized POSS and/or GPTMS having a flexible segment reduces the capillary force developed during solvent evaporation. The properties of the TEOS/GPTMS/POSS composite solutions were compared with those of commercial products (Wacker OH and Unil sandsteinfestiger OH 1:1). The gelation time was similar to that of commercial consolidants, and the TEOS/GPTMS/POSS solution was stable over a period of up to 6 months. The addition of POSS and GPTMS provided a crack-free gel, while the gel from the commercial consolidants exhibited cracks after drying. The surface hydrophobicity of the treated decayed granite increased with the addition of POSS and GPTMS, and it was higher than that of the commercial product, implying the possibility of POSS and GPTMS as barriers to the penetration of water. This result implies that the TEOS/GPTMS/POSS solution showed a high suitability for the consolidation of granite heritage.

  7. A new type of organic-inorganic hybrid NLO-phore with large off-diagonal first hyperpolarizability tensors: a two-dimensional approach.

    PubMed

    Muhammad, Shabbir; Xu, Hongliang; Su, Zhongmin; Fukuda, Kotaro; Kishi, Ryohei; Shigeta, Yasuteru; Nakano, Masayoshi

    2013-11-14

    We report a novel type of organic-inorganic hybrid material with rare two-dimensional nonlinear optical (NLO) properties. The density functional theory (DFT) calculations combined with the finite-field (FF) method show that the designed molecules (6,9 organo-derivatives of B10H14) could carry the characteristic NLO properties of both organic and inorganic materials. Interestingly, due to their unique V-shaped structures, they have large off-diagonal first hyperpolarizability tensors or nonlinear anisotropy, which is an advantage in their practical applications over conventional donor-π-acceptor (D-π-A) NLO-phores. The systematic substitutions of terminal donor/acceptor groups as well as the extension of π-conjugation along the V-shape in these derivatives have been evaluated to guide a purpose-oriented synthesis of NLO material. All the systems in the present study have been categorized into Set-I and Set-II with D-π-A-π-D and A-π-D-π-A configurations, respectively. These designed derivatives show large amplitudes of βz values. For example, systems 3N (6,9-[(N=C=Ph-NO2)2]-B10H12) and 4N (6,9-[((N=C=Ph)2-NO2)2]-B10H12) have βz amplitudes as large as 34.16 and 276.91 × 10(3) a.u. which are 380 and 3000 times larger than those of a typical NLO molecule of urea, respectively. Remarkably, the substitution of nitrogen atoms with 6,9 hydrogen atoms in decaborane is shown to cause a lone pair back donation to vacant p orbitals of 6,9 boron atoms of the decaborane basket. This p orbital overlapping verticalizes the V-arms of the decaborane derivatives and boosts their nonlinear anisotropies due to their larger off-diagonal tensor components. The nonlinear anisotropy values are significantly larger, ranging from 1 (minimum in system 1) to 31.90 (maximum in system 3A) due to their unique V-shape. Comparison of their efficiencies with standard molecules demonstrates that our designed organic-inorganic hybrid molecules have significant potential as excellent

  8. (CH3 NH3 )2 PdCl4 : A Compound with Two-Dimensional Organic-Inorganic Layered Perovskite Structure.

    PubMed

    Huang, Tang Jiao; Thiang, Zhang Xian; Yin, Xuesong; Tang, Chunhua; Qi, Guojun; Gong, Hao

    2016-02-01

    The synthesis of previously unknown perovskite (CH3 NH3 )2 PdCl4 is reported. Despite using an organic cation with the smallest possible alkyl group, a 2D organic-inorganic layered Pd-based perovskites was still formed. This demonstrates that Pd-based 2D perovskites can be obtained even if the size of the organic cation is below the size limit predicted by the Goldschmidt tolerance-factor formula. The (CH3 NH3 )2 PdCl4 phase has a bulk resistivity of 1.4 Ω cm, a direct optical gap of 2.22 eV, and an absorption coefficient on the order of 10(4)  cm(-1) . XRD measurements suggest that the compound is moderately stable in air, an important advantage over several existing organic-inorganic perovskites that are prone to phase degradation problems when exposed to the atmosphere. Given the recent interest in organic-inorganic perovskites, the synthesis of this new Pd-based organic-inorganic perovskite may be helpful in the preparation and understanding of other organic-inorganic perovskites. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Layered and Pb-Free Organic-Inorganic Perovskite Materials for Ultraviolet Photoresponse: (010)-Oriented (CH3NH3)2MnCl4 Thin Film.

    PubMed

    Nie, Zhonghao; Yin, Jie; Zhou, Huawei; Chai, Ning; Chen, Baoli; Zhang, Yingtian; Qu, Konggang; Shen, Guodong; Ma, Huiyan; Li, Yuchao; Zhao, Jinsheng; Zhang, Xianxi

    2016-10-07

    Organic-inorganic lead perovskite materials show impressive performance in photovoltaics, photodetectors, light-emitting diodes, lasers, sensors, medical imaging devices, and other applications. Although organic-inorganic lead perovskites have shown good performance in numerous fields, they contain toxic Pb, which is expected to cause environmental pollution in future large-scale applications. Thus, the photoelectric properties of Pb-free organic-inorganic perovskite materials should be developed and studied. In this paper, we report on the photoresponse of Pb-free organic-inorganic hybrid manganese perovskite (CH3NH3)2MnCl4. To the best of our knowledge, this study demonstrates the first time that organic-inorganic hybrid manganese perovskites are used for this type of application. We found that the solution-processed MA2MnCl4 thin film tends to be oriented along the b-axis direction on the TiO2 surface. The evident photoresponse of the FTO/TiO2/MA2MnCl4/carbon electrode devices was observed under 10-30 Hz flashlight frequencies and a 330 nm light beam. This simple, green, and low-cost photoresponsive device is beneficial for the future industrial production of optical recorders and optical memory devices.

  10. Designing added functions in engineered cementitious composites

    NASA Astrophysics Data System (ADS)

    Yang, En-Hua

    In this dissertation, a new and systematic material design approach is developed for ECC with added functions through material microstructures linkage to composite macroscopic behavior. The thesis research embodies theoretical development by building on previous ECC micromechanical models, and experimental investigations into three specific new versions of ECC with added functions aimed at addressing societal demands of our built infrastructure. Specifically, the theoretical study includes three important ECC modeling elements: Steady-state crack propagation analyses and simulation, predictive accuracy of the fiber bridging constitutive model, and development of the rate-dependent strain-hardening criteria. The first element establishes the steady-state cracking criterion as a fundamental requirement for multiple cracking behavior in brittle matrix composites. The second element improves the accuracy of crack-width prediction in ECC. The third element establishes the micromechanics basis for impact-resistant ECC design. Three new ECCs with added functions were developed and experimentally verified in this thesis research through the enhanced theoretical framework. A green ECC incorporating a large volume of industrial waste was demonstrated to possess reduced crack width and drying shrinkage. The self-healing ECC designed with tight crack width was demonstrated to recover transport and mechanical properties after microcrack damage when exposed to wet and dry cycles. The impact-resistant ECC was demonstrated to retain tensile ductility with increased strength under moderately high strain-rate loading. These new versions of ECC with added functions are expected to contribute greatly to enhancing the sustainability, durability, and safety of civil infrastructure built with ECC. This research establishes the effectiveness of micromechanics-based design and material ingredient tailoring for ECC with added new attributes but without losing its basic tensile ductile

  11. Neutron powder diffraction study of the layer organic-inorganic hybrid iron(II) methylphosphonate-hydrate, Fe[(CD 3PO 3)(D 2O)

    NASA Astrophysics Data System (ADS)

    Léone, Philippe; Bellitto, Carlo; Bauer, Elvira M.; Righini, Guido; André, Gilles; Bourée, Françoise

    2008-11-01

    The crystal and magnetic structures of the hybrid organic-inorganic layer compound Fe[(CD 3PO 3)(D 2O)] have been studied by neutron powder diffraction as a function of temperature down to 1.5 K. The neutron diffraction pattern recorded at 200 K shows that the fully deuterated compound crystallizes in one of the two known forms of the undeuterated Fe[(CH 3PO 3)(H 2O)]. The crystal structure is orthorhombic, space group Pmn2 1, with the following unit-cell parameters: a=5.7095(1) Å, b=8.8053(3) Å and c=4.7987(1) Å; Z=2. The crystal structure remains unchanged on cooling from 200 to 1.5 K. Moreover, at low temperature, Fe[(CD 3PO 3)(D 2O)] shows a commensurate magnetic structure ( k=(0,0,0)). As revealed by bulk susceptibility measurements on Fe[(CH 3PO 3)(H 2O)], the magnetic structure corresponds to a canted antiferromagnet with a critical temperature TN=25 K. Neutron powder diffraction reveals that below TN=23.5 K the iron magnetic moments in Fe[(CD 3PO 3)(D 2O)] are antiferromagnetically coupled and oriented along the b-axis, perpendicular to the inorganic layers. No ferromagnetic component is observable in the neutron powder diffraction experiment, due to its too small value (<0.1 μB).

  12. Controllable growth of conducting polymers shell for constructing high-quality organic/inorganic core/shell nanostructures and their optical-electrochemical properties.

    PubMed

    Xia, Xinhui; Chao, Dongliang; Qi, Xiaoying; Xiong, Qinqin; Zhang, Yongqi; Tu, Jiangping; Zhang, Hua; Fan, Hong Jin

    2013-09-11

    High-quality metal oxide/conducting polymer (CP) heterostructured nanoarrays are fabricated by controllable electrochemical polymerization of CP shells on preformed metal oxides nanostructures for both electrochromic and electrochemical energy storage applications. Coaxial and branched CP shells can be obtained on different backbones (nanowire, nanorod, and nanoflake) simply by controlling the electrodeposition time. "Solvophobic" and "electrostatic" interactions are proposed to account for the preferential growth of CP along metal oxides to form core/shell heterostructures. The coaxial TiO2/polyaniline core/shell nanorod arrays exhibit remarkable electrochromic performance with rich color changes, fast optical modulation, and superior cycling stability. In addition, the Co3O4/polyaniline core/shell nanowire arrays are evaluated as an anode material of Li ion battery and exhibit enhanced electrochemical property with higher and more stable capacity than the bare Co3O4 nanowires electrode. These unique organic-inorganic heterostructures with synergy pave the way for developing new functional materials with enhanced properties or new applications.

  13. Zero-dipole molecular organic cations in mixed organic-inorganic halide perovskites: possible chemical solution for the reported anomalous hysteresis in the current-voltage curve measurements.

    PubMed

    Giorgi, Giacomo; Yamashita, Koichi

    2015-11-06

    Starting from a brief description of the main architectures characterizing the novel solar technology of perovskite-based solar cells, we focus our attention on the anomalous hysteresis experimentally found to affect the measurement of the current-voltage curve of such devices. This detrimental effect, associated with slow dynamic reorganization processes, depends on several parameters; among them, the scan rate of the measurements, the architecture of the cell, and the perovskite deposition rate are crucial. Even if a conclusive explanation of the origin of the hysteresis has not been provided so far, several experimental findings ascribe its origin to ionic migration at an applied bias and dielectric polarization that occurs in the perovskite layer. Consistently, a dipole-moment-reduced cation such as formamidinium ion is experimentally reported to quantitatively reduce the hysteresis from perovskite-based devices. By means of a density-functional theory-based set of calculations, we have predicted and characterized guanidinium ion (GA = (+)[C(NH2)3], a zero-dipole moment cation by symmetry)-based organic-inorganic halide perovskite's structural and electronic properties, speculating that such a cation and the alloys it may form with other organic cations can represent a possible chemical solution for the puzzling issue of the hysteresis.

  14. Organic-inorganic compounds with strong nonlinear optical properties based on 2,4,6-trimethylpyridinium and tetrahedral BF4- networks

    NASA Astrophysics Data System (ADS)

    Wojtaś, Maciej; Bil, Andrzej; Jakubas, Ryszard; Gągor, Anna; Pietraszko, Adam; Czupiński, Olaf; Tylczyński, Zbigniew; Isakov, Dmitry

    2011-04-01

    A different organic-inorganic crystal—[2,4,6-trimethylpyridinium][BF4]—of nonlinear optical properties at room temperature was synthesized and characterized. The compound is built up of the organic [2,4,6-trimethylpyridinium] cations incorporated into inorganic, tetrahedral BF4 anions. It crystallizes at room temperature in the polar space group Pmn21, and undergoes three first-order phase transitions at [cooling (heating)] 241 (245) K, 297 (328) K, and 389 (406) K. The lowest temperature ferroic phase transition (ferroelastic; mm2→m type) is related to the significant pyroelectric effect. The compound was studied by single-crystal x-ray diffraction at several temperatures, using thermal (differential scanning calorimetry and thermogravimetric analysis) methods and dielectric spectroscopy. The piezoelectric, pyroelectric, and second-harmonic generation (SHG) properties were determined. Density-functional theory calculations in two stable phases are given. The [2,4,6-trimethylpyridinium][BF4] crystal exhibits a SHG efficiency of 1.7 times that of KDP. The mechanism of structural phase transitions in the title compound is discussed.

  15. Characterization of organic-inorganic hybrid layered perovskite and intercalated compound (n-C12H25NH3)2ZnCl4

    NASA Astrophysics Data System (ADS)

    Abdel-Kader, M. M.; Aboud, A. I.; Gamal, W. M.

    2016-05-01

    We report on some electrical properties and solid-solid phase transitions of organic-inorganic hybrid layered halide perovskite and intercalated compound (n-C12H25NH3)2ZnCl4 which is one member of the long-chain compounds of the series (n-CnH2n+1NH3)2,(n = 8-18). The complex dielectric permittivity ɛ*(ω,T) and the ac conductivity σ (ω,T) were measured as functions of temperature 100 K < T < 390 K and frequency 5 kHz < f < 100 kHz. Moreover, the differential scanning calorimetery and the differential thermal analysis thermograms were performed. The analysis of our data confirms the existence of a structural phase transition at T ≈ (362 ± 2) K, where the compound changes its state from intercalation to non-intercalation with a drastic increase in the c-axis by about 16.4%. The behavior of the frequency-dependent conductivity follows the Jonscher universal power law: σ (ω, T) αῳs(ῳ,T). The mechanism of electrical conduction in the low-temperature phase (phase II) can be described as quantum mechanical tunneling model.

  16. Multifunctional properties of organic-inorganic hybrid nanocomposites based on chitosan derivatives and layered double hydroxides for ocular drug delivery.

    PubMed

    Xu, Tingting; Zhang, Jie; Chi, Huibo; Cao, Feng

    2016-05-01

    To improve the ocular bioavailability of the model drug of pirenoxine sodium (PRN), organic-inorganic hybrid nanocomposites including layered double hydroxides (LDH) and chitosan derivatives (chitosan-glutathione (CG), chitosan-glutathione-valine (CG-V) and chitosan-glutathione-valine-valine (CG-VV)) were designed and characterized. In vivo precorneal retention study on rabbits showed that mean residence time (MRT) and area under the curve (AUC0-6h) of CG-PRN-LDH nanocomposite eye drop was up to 2.1-fold and 6.3-fold higher than those of commercial product, respectively. In vitro corneal penetration on rabbits demonstrated that the cumulative permeation of CG-VV-PRN-LDH nanocomposite dispersion was increased by 5.2 folds compared to that of commercial product, which may be due to the active transport effect of the nanocomposites by peptide transporter-1 (PepT-1). In addition, the ex vivo fluorescence imaging showed that fluorescent intensity of crystalline lens in rabbits was increased after the administration of PRN-LDH, CG-PRN-LDH, CG-V-PRN-LDH and CG-VV-PRN-LDH (in increasing order) nanocomposite eye drop. Finally, in vivo distribution evaluation in ocular tissues of rabbits revealed that AUC0-8h and MRT in crystalline lens exhibited 14.7-fold and 2.2-fold increase in CG-VV-PRN-LDH nanocomposite eye drop group than those of commercial group, respectively. In summary, the organic-inorganic hybrid nanocomposites with multifunctional properties may be a promising ocular drug delivery system to achieve prolonged precorneal retention, better corneal permeability and enhanced ocular bioavailability. Due to several structural and physiological intraocular barriers, drug delivery to the ocular mid-posterior segments still faces great challenges. In this manuscript, organic-inorganic hybrid nanocomposites based on chitosan derivatives and layered double hydroxides (LDH) were designed and constructed. Multifunctional properties of these hybrid nanocomposites were due to

  17. Functionally Graded Metal-Metal Composite Structures

    NASA Technical Reports Server (NTRS)

    Brice, Craig A. (Inventor)

    2017-01-01

    Methods and devices are disclosed for creating a multiple alloy composite structure by forming a three-dimensional arrangement of a first alloy composition in which the three-dimensional arrangement has a substantially open and continuous porosity. The three-dimensional arrangement of the first alloy composition is infused with at least a second alloy composition, where the second alloy composition comprises a shape memory alloy. The three-dimensional arrangement is consolidated into a fully dense solid structure, and the original shape of the second alloy composition is set for reversible transformation. Strain is applied to the fully dense solid structure, which is treated with heat so that the shape memory alloy composition becomes memory activated to recover the original shape. An interwoven composite of the first alloy composition and the memory-activated second alloy composition is thereby formed in the multiple alloy composite structure.

  18. Ti/Au Cathode for Electronic transport material-free organic-inorganic hybrid perovskite solar cells

    PubMed Central

    Shi, Tongfei; Chen, Jian; Zheng, Jianqiang; Li, Xinhua; Zhou, Bukang; Cao, Huaxiang; Wang, Yuqi

    2016-01-01

    We have fabricated organic-inorganic hybrid perovskite solar cell that uses a Ti/Au multilayer as cathode and does not use electron transport materials, and achieved the highest power conversion efficiency close to 13% with high reproducibility and hysteresis-free photocurrent curves. Our cell has a Schottky planar heterojunction structure (ITO/PEDOT:PSS/perovskite/Ti/Au), in which the Ti insertion layer isolate the perovskite and Au layers, thus proving good contact between the Au and perovskite and increasing the cells’ shunt resistance greatly. Moreover, the Ti/Au cathode in direct contact with hybrid perovskite showed no reaction for a long-term exposure to the air, and can provide sufficient protection and avoid the perovskite and PEDOT:PSS layers contact with moisture. Hence, the Ti/Au based devices retain about 70% of their original efficiency after 300 h storage in the ambient environment. PMID:27995951

  19. Ti/Au Cathode for Electronic transport material-free organic-inorganic hybrid perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Shi, Tongfei; Chen, Jian; Zheng, Jianqiang; Li, Xinhua; Zhou, Bukang; Cao, Huaxiang; Wang, Yuqi

    2016-12-01

    We have fabricated organic-inorganic hybrid perovskite solar cell that uses a Ti/Au multilayer as cathode and does not use electron transport materials, and achieved the highest power conversion efficiency close to 13% with high reproducibility and hysteresis-free photocurrent curves. Our cell has a Schottky planar heterojunction structure (ITO/PEDOT:PSS/perovskite/Ti/Au), in which the Ti insertion layer isolate the perovskite and Au layers, thus proving good contact between the Au and perovskite and increasing the cells’ shunt resistance greatly. Moreover, the Ti/Au cathode in direct contact with hybrid perovskite showed no reaction for a long-term exposure to the air, and can provide sufficient protection and avoid the perovskite and PEDOT:PSS layers contact with moisture. Hence, the Ti/Au based devices retain about 70% of their original efficiency after 300 h storage in the ambient environment.

  20. Ultrathin Two-Dimensional Organic-Inorganic Hybrid Perovskite Nanosheets with Bright, Tunable Photoluminescence and High Stability.

    PubMed

    Yang, Shuang; Niu, Wenxin; Wang, An-Liang; Fan, Zhanxi; Chen, Bo; Tan, Chaoliang; Lu, Qipeng; Zhang, Hua

    2017-03-15

    Two-dimensional (2D) organic-inorganic hybrid perovskite nanosheets (NSs) are attracting increasing research interest due to their unique properties and promising applications. Here, for the first time, we report the facile synthesis of single- and few-layer free-standing phenylethylammonium lead halide perovskite NSs, that is, (PEA)2 PbX4 (PEA=C8 H9 NH3 , X=Cl, Br, I). Importantly, their lateral size can be tuned by changing solvents. Moreover, these ultrathin 2D perovskite NSs exhibit highly efficient and tunable photoluminescence, as well as superior stability. Our study provides a simple and general method for the controlled synthesis of 2D perovskite NSs, which may offer a new avenue for their fundamental studies and optoelectronic applications.

  1. Photosensitized reduction of water to hydrogen using novel Maya blue-like organic-inorganic hybrid material.

    PubMed

    Zhang, Xiaojie; Jin, Zhiliang; Li, Yuexiang; Li, Shuben; Lu, Gongxuan

    2009-05-01

    On the basis of the understanding that membranes play an important role in the separation of the intermediate photoproducts in the photosynthetic process, a novel efficient hydrogen evolution system was constructed with Maya blue-like organic-inorganic hybrid material as a photocatalyst, in which palygorskite acts as matrix and Eosin Y as a photosensitizer. Under visible light irradiation (lambda > or = 420 nm), the highest rate of hydrogen evolution and apparent quantum yield are about 3247.2 micromol h(-1) (g Eosin Y)(-1) and 12.5%, respectively. Negatively charged palygorskite particles could control the photosensitized electron-transfer reaction by means of electrostatic interaction. Based on the activities of hydrogen generation and the experimental measurements of UV-vis absorbance and fluorescence, a probable mechanism for photosensitized hydrogen evolution was postulated.

  2. Efficient conversion of furfuryl alcohol into alkyl levulinates catalyzed by an organic-inorganic hybrid solid acid catalyst.

    PubMed

    Zhang, Zehui; Dong, Kun; Zhao, Zongbao Kent

    2011-01-17

    A clean, facile, and environment-friendly catalytic method has been developed for the conversion of furfuryl alcohol into alkyl levulinates making use of the novel solid catalyst methylimidazolebutylsulfate phosphotungstate ([MIMBS]₃PW₁₂O₄₀). The solid catalyst is an organic-inorganic hybrid material, which consists of an organic cation and an inorganic anion. A study for optimizing the reaction conditions such as the reaction time, the temperature and the catalyst loading has been performed. Under optimal conditions, a high n-butyl levulinate yield of up to 93 % is obtained. Furthermore, the kinetics of the reaction pathways and the mechanism for the alcoholysis of furfuryl alcohol are discussed. This method is environmentally benign and economical for the conversion of biomass-based derivatives into fine chemicals.

  3. Ultrasmooth organic-inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells.

    PubMed

    Zhang, Wei; Saliba, Michael; Moore, David T; Pathak, Sandeep K; Hörantner, Maximilian T; Stergiopoulos, Thomas; Stranks, Samuel D; Eperon, Giles E; Alexander-Webber, Jack A; Abate, Antonio; Sadhanala, Aditya; Yao, Shuhua; Chen, Yulin; Friend, Richard H; Estroff, Lara A; Wiesner, Ulrich; Snaith, Henry J

    2015-01-30

    To date, there have been a plethora of reports on different means to fabricate organic-inorganic metal halide perovskite thin films; however, the inorganic starting materials have been limited to halide-based anions. Here we study the role of the anions in the perovskite solution and their influence upon perovskite crystal growth, film formation and device performance. We find that by using a non-halide lead source (lead acetate) instead of lead chloride or iodide, the perovskite crystal growth is much faster, which allows us to obtain ultrasmooth and almost pinhole-free perovskite films by a simple one-step solution coating with only a few minutes annealing. This synthesis leads to improved device performance in planar heterojunction architectures and answers a critical question as to the role of the anion and excess organic component during crystallization. Our work paves the way to tune the crystal growth kinetics by simple chemistry.

  4. Methanol selective fibre-optic gas sensor with a nanoporous thin film of organic-inorganic hybrid multilayers

    NASA Astrophysics Data System (ADS)

    Wang, T.; Okuda, H.; Lee, S.-W.

    2015-07-01

    The development of an evanescent wave optical fibre (EWOF) sensor modified with an organic-inorganic hybrid nanoporous thin film for alcohol vapor detection was demonstrated. The optical fibre with a core diameter of 200 μm was bent into U-shape probe optic fibre to enhance the penetation depth of light transferred into the evanescent filed. The bended region of the fibre was modified with a multilayered thin film of poly(allyamine hydrochloride) and silica nanoparticels, (PAH/SiO2)n, by a layer-by-layer (LbL) film deposition technique, followed by infusion of tetrakis(4- sulfophenyl)porphine, TPPS. The mesoporous film structure showed high sensitivity and selectivity to methanol by the aid of the TPPS infused inside the film. The optical sensor response was reversible and reproducible over many times of exposures to analytes, which was caused by the change in refractive index (RI) of the film.

  5. Photo-triggered molecular release based on auto-degradable polymer-containing organic-inorganic hybrids.

    PubMed

    Okada, Hiroshi; Tanaka, Kazuo; Ohashi, Wataru; Chujo, Yoshiki

    2014-07-01

    The photo-triggered molecular release from the organic-inorganic polymer hybrids is presented in this manuscript. Initially, the preparation of the auto-degradable polymer is explained with the photo-cleavable group at the end of the polymer main-chain. The silica-based dye-loaded hybrids containing these polymers were fabricated. It was found that by UV irradiation, the end capping was removed, and then the auto-degradation occurs through the polymer main-chain. Finally, the molecular release of the loaded dyes was accomplished in various media by the UV irradiation. In particular, it was shown that both of hydrophobic and hydrophilic dyes can be applied in this system.

  6. Dehydrocoupling and Silazane Cleavage Routes to Organic-Inorganic Hybrid Polymers with NBN Units in the Main Chain.

    PubMed

    Lorenz, Thomas; Lik, Artur; Plamper, Felix A; Helten, Holger

    2016-06-13

    Despite the great potential of both π-conjugated organoboron polymers and BN-doped polycyclic aromatic hydrocarbons in organic optoelectronics, our knowledge of conjugated polymers with B-N bonds in their main chain is currently scarce. Herein, the first examples of a new class of organic-inorganic hybrid polymers are presented, which consist of alternating NBN and para-phenylene units. Polycondensation with B-N bond formation provides facile access to soluble materials under mild conditions. The photophysical data for the polymer and molecular model systems of different chain lengths reveal a low extent of π-conjugation across the NBN units, which is supported by DFT calculations. The applicability of the new polymers as macromolecular polyligands is demonstrated by a cross-linking reaction with Zr(IV) .

  7. Effect of organic moieties on the scintillation properties of organic-inorganic layered perovskite-type compounds

    NASA Astrophysics Data System (ADS)

    Kawano, Naoki; Koshimizu, Masanori; Horiai, Akiyoshi; Nishikido, Fumihiko; Haruki, Rie; Kishimoto, Shunji; Shibuya, Kengo; Fujimoto, Yutaka; Yanagida, Takayuki; Asai, Keisuke

    2016-11-01

    The effects of organic moieties on the scintillation properties of organic-inorganic layered perovskite-type compounds have been investigated. Three kinds of single crystals were fabricated, namely, (C4H9NH3)2PbBr4 (C4), (C6H5CH2NH3)2PbBr4 (Ben), and (C6H5C2H4NH3)2PbBr4 (Phe). Among the single crystals, the light output of Phe was found to have the greatest value when exposed to X-ray radiation (67.4 keV). The light output of Phe was 0.62 times that of YAP:Ce. The relative values of the light outputs among the fabricated single crystals under X-ray radiation correlated well with those of the quantum efficiencies and the luminescence intensity under ultraviolet radiation.

  8. Synthesis and structural characterization of inorganic-organic-inorganic hybrids of dipalladium-substituted γ-Keggin silicodecatungstates.

    PubMed

    Hirano, Tomohisa; Uehara, Kazuhiro; Uchida, Sayaka; Hibino, Mitsuhiro; Kamata, Keigo; Mizuno, Noritaka

    2013-03-04

    Three inorganic-organic-inorganic hybrids of dipalladium-substituted γ-Keggin silicodecatungstates with organic linkers of different lengths, TBA8[{(γ-H2SiW10O36Pd2)(O2C(CH2)nCO2)}2] (n = 1 (II), 3 (III), and 5 (IV), TBA = [(n-C4H9)4N](+)), were synthesized by exchange of the acetate ligands in TBA4[γ-H2SiW10O36Pd2(OAc)2] (ITBA) with malonic, glutaric, and pimelic acids, respectively. The X-ray crystallographic analysis of II, IIIA (IIIA: III with DCE, DCE = 1,2-dichloroethane), and IVA (IVA: IV with 10DCE) revealed that the anion parts of II, IIIA, and IVA were inorganic-organic-inorganic hybrids composed of two dipalladium-substituted γ-Keggin silicodecatungstates connected by two dicarboxylate ligands. In the crystal structure of IVA, 10 DCE molecules per polyanion were present in the vicinity of polyanions. Compound IVB (IVB: IV with 0.2DCE) was obtained by the evacuation of IVA. The DCE sorption-desorption isotherms of IVB showed that the amount of DCE sorbed was saturated at 10.5 mol mol(-1), of which the amount was close to that (10 mol mol(-1)) of crystallographically assigned DCE molecules. In the DCE sorption-desorption isotherms, a low-pressure hysteresis was observed probably because of hydrogen-bonding interaction between DCE molecules and polyanions. The powder X-ray diffraction (XRD) pattern of IVA changed with decrease in the relative DCE vapor pressure to form IVC (IVC: IV with 0.7DCE) at P/P0 = 0.0. The in situ powder XRD study showed reversible structure transformation between IVA and IVC driven by the sorption-desorption of DCE.

  9. Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation Of Inorganic Nanoparticles And Organic/Inorganic Hybrid Nanocomposites

    SciTech Connect

    Pate, Ryan; Lantz, Kevin R.; Stiff-Roberts, Adrienne D.; Dhawan, Anuj; Vo-Dinh, Tuan

    2010-10-08

    In this research, resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) has been used to deposit different classes of inorganic nanoparticles, including bare, un-encapsulated ZnO and Au nanoparticles, as well as ligand-encapsulated CdSe colloidal quantum dots (CQDs). RIR-MAPLE has been used for thin-film deposition of different organic/inorganic hybrid nanocomposites using some of these inorganic nanoparticles, including CdSe CQD-poly[2-methoxy-5-(2'-ethylhexyloxy )-1,4-(1-cyanovinylene)phenylene](MEH-CN-PPV) nanocomposites and Au nanoparticle-poly(methyl methacrylate)(PMMA) nanocomposites. The unique contribution of this research is that a technique is demonstrated for the deposition of organic-based thin-films requiring solvents with bond energies that do not have to be resonant with the laser energy. By creating an emulsion of solvent and ice in the target, RIR-MAPLE using a 2.94 {mu}m laser can deposit most material systems because the hydroxyl bonds in the ice component of the emulsion matrix are strongly resonant with the 2.94 {mu}m laser. In this way, the types of materials that can be deposited using RIR-MAPLE has been significantly expanded. Furthermore, materials with different solvent bond energies can be co-deposited without concern for material degradation and without the need to specifically tune the laser energy to each material solvent bond energy, thereby facilitating the realization of organic/inorganic hybrid nanocomposite thin-films. In addition to the structural characterization of the inorganic nanoparticle and hybrid nanocomposite thin-films deposited using this RIR-MAPLE technique, optical characterization is presented to demonstrate the potential of such films for optoelectronic device applications.

  10. Novel functional composites of plasmas and metamaterials

    NASA Astrophysics Data System (ADS)

    Sakai, Osamu

    2012-10-01

    Plasmas, which are fairly frequency-dispersive in their dielectric properties, have tunable and nonlinear features that cannot be achieved using other solids and liquids. Such features on variable complex permittivity can be activated in metamaterial structure; when we combine plasmas with metamaterials which have functional micro-structures leading to designable permeability, we can expect a quite broad range of negative refractive index on its complex plane for electromagnetic waves. Furthermore, if a given electromagnetic wave has sufficient wave amplitude to modulate electron density, such a composite work as a strong nonlinear medium with adjustability through the metamaterial features. Such kinds of arguments are reviewed in our recent reports [1,2]. One of the specific physical properties emerging in plasma metamaterials is an exchange phenomenon between attenuation and phase shift via regulated permeability. Conventional collisional plasmas work simply as attenuators for electromagnetic waves, but superposition of a negative permeability state induces significant phase shift of propagating waves with less attenuation. Another example is simultaneous generation of a high-density plasma with a negative-refractive-index state; we predicted quite strong nonlinear processes with double saddle-node bifurcations during this phenomenon, and verified them in our recent experiments. Such composites of plasmas and metamaterials will provide new scientific opportunities as well as industrial applications.[4pt] [1] O. Sakai et al., Physics of Plasmas, vol. 17 (2010), 123504.[0pt] [2] O. Sakai et al., Plasma Sources Sci. Technol., vol. 21 (2012), 013001.

  11. Enzymatically degradable hybrid organic-inorganic bridged silsesquioxane nanoparticles for in vitro imaging

    NASA Astrophysics Data System (ADS)

    Fatieiev, Y.; Croissant, J. G.; Julfakyan, K.; Deng, L.; Anjum, D. H.; Gurinov, A.; Khashab, N. M.

    2015-09-01

    We describe biodegradable bridged silsesquioxane (BS) composite nanomaterials with an unusually high organic content (ca. 50%) based on oxamide components mimicking amino acid biocleavable groups. Unlike most bulk BS materials, the design of sub-200 nm nearly monodisperse nanoparticles (NPs) was achieved. These enzymatically degradable BS NPs were further tested as promising imaging nanoprobes.We describe biodegradable bridged silsesquioxane (BS) composite nanomaterials with an unusually high organic content (ca. 50%) based on oxamide components mimicking amino acid biocleavable groups. Unlike most bulk BS materials, the design of sub-200 nm nearly monodisperse nanoparticles (NPs) was achieved. These enzymatically degradable BS NPs were further tested as promising imaging nanoprobes. Electronic supplementary information (ESI) available: Detailed synthetic procedure, experimental procedure and Fig. S1-15. See DOI: 10.1039/c5nr03065j

  12. Childhood thyroid function, body composition and cardiovascular function.

    PubMed

    Barjaktarovic, Mirjana; Korevaar, Tim I M; Gaillard, Romy; de Rijke, Yolanda B; Visser, Theo J; Jaddoe, Vincent W V; Peeters, Robin P

    2017-10-01

    The cardiovascular system is a known target for thyroid hormone. Early-life cardiovascular alterations may lead to a higher risk of cardiovascular disease in adulthood. Little is known about the effects of thyroid hormone on cardiovascular function during childhood, including the role of body composition in this association. Population-based prospective cohort of children (n = 4251, median age 6 years, 95% range: 5.7-8.0 years). Thyroid-stimulating hormone (TSH) and free thyroxine (FT4) concentrations were measured to assess thyroid function. Left ventricular (LV) mass was assessed with echocardiography. Arterial stiffness was assessed with carotid-femoral pulse wave velocity (CFPWV). Systolic and diastolic blood pressure (BP) was measured. Body composition was assessed by dual-energy X-ray absorptiometry scan. FT4 was inversely associated with LV mass (P = 0.002), and with lean body mass (P < 0.0001). The association of FT4 with LV mass was partially mediated through variability in lean body mass (55% mediated effect). TSH was inversely associated with LV mass (P = 0.010), predominantly in boys. TSH was positively associated with systolic and diastolic BP (both P < 0.001). FT4 was positively associated with CFPWV and diastolic BP (P < 0.0001, P = 0.008, respectively), and the latter association attenuated after adjustment for CFPWV. At the age of 6 years, higher FT4 is associated with lower LV mass (partially through effects on lean body mass) and with higher arterial stiffness, which may lead to higher BP. Our data also suggest different mechanisms via which TSH and FT4 are associated with cardiovascular function during early childhood. © 2017 European Society of Endocrinology.

  13. Demographic drivers of functional composition dynamics.

    PubMed

    Muscarella, Robert; Lohbeck, Madelon; Martínez-Ramos, Miguel; Poorter, Lourens; Rodríguez-Velázquez, Jorge Enrique; van Breugel, Michiel; Bongers, Frans

    2017-08-20

    Mechanisms of community assembly and ecosystem function are often analyzed using community-weighted mean trait values (CWMs). We present a novel conceptual framework to quantify the contribution of demographic processes (i.e., growth, recruitment, and mortality) to temporal changes in CWMs. We used this framework to analyze mechanisms of secondary succession in wet tropical forests in Mexico. Seed size increased over time, reflecting a trade-off between colonization by small seeds early in succession, to establishment by large seeds later in succession. Specific leaf area (SLA) and leaf phosphorus content decreased over time, reflecting a trade-off between fast growth early in succession vs. high survival late in succession. On average, CWM shifts were driven mainly (70%) by growth of surviving trees that comprise the bulk of standing biomass, then mortality (25%), and weakly by recruitment (5%). Trait shifts of growing and recruiting trees mirrored the CWM trait shifts, and traits of dying trees did not change during succession, indicating that these traits are important for recruitment and growth, but not for mortality, during the first 30 yr of succession. Identifying the demographic drivers of functional composition change links population dynamics to community change, and enhances insights into mechanisms of succession. © 2017 by the Ecological Society of America.

  14. Atomic structure of metal-halide perovskites from first principles: The chicken-and-egg paradox of the organic-inorganic interaction

    NASA Astrophysics Data System (ADS)

    Li, Jingrui; Rinke, Patrick

    2016-07-01

    We have studied the prototype hybrid organic-inorganic perovskite CH3NH3PbI3 and its three close relatives, CH3NH3SnI3 ,CH3NH3PbCl3 , and CsPbI3, using relativistic density function theory. The long-range van der Waals (vdW) interactions were incorporated into the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional using the Tkatchenko-Scheffler pairwise scheme. Our results reveal that hydrogen bonding, which is well described by the PBE functional, plays a decisive role for the structural parameters of these systems, including the position and orientation of the organic cation as well as the deformation of the inorganic framework. The magnitude of the inorganic-framework deformation depends sensitively on the orientation of the organic cation, and directly influences the stability of the hybrid perovskites. Our results suggest that the organic and the inorganic components complement each other; the low symmetry of the organic cation is the origin of the inorganic-framework deformation, which then aids the overall stabilization of the hybrid perovskite structure. This stabilization is indirectly affected by vdW interactions, which lead to smaller unit-cell volumes than in PBE and therefore modulate the interaction between the organic cation and the inorganic framework. The vdW-induced lattice-constant corrections are system dependent and lead to PBE+vdW lattice constants in good agreement with experiment. Further insight is gained by analyzing the vdW contributions. In all iodide-based hybrid perovskites, the interaction between the organic cation and the iodide anions provides the largest lattice-constant change, followed by iodine-iodine and the organic cation—heavy-metal cation interaction. These corrections follow an almost linear dependence on the lattice constant within the range considered in our study and are therefore approximately additive.

  15. Improving the bioactivity of bioglass/ (PMMA-co-MPMA) organic/inorganic hybrid.

    PubMed

    Ravarian, R; Wei, H; Dehghani, F

    2011-01-01

    Binary system of CaO-SiO(2) glasses enables the apatite formation in simulated body fluid (SBF). However, the presence of phosphate content in SiO(2)-CaO-P(2)O(5) glasses leads to the formation of orthophosphate nanocrystalline nuclei, which facilitates the generation of carbonate hydroxyapatite; this compound is more compatible with natural bone. The brittle and less flexible properties of bioactive glasses are the major obstacle for their application as bone implant. The hybridization of essential constituents of bioactive glasses and glass-ceramics with polymers such as PMMA can improve their poor mechanical properties. The aim of this study was to improve the bioactivity of nanocomposites fabricated from poly(methyl metacrylate) (PMMA) and bioglass for bone implant applications. Bioglass compounds with various phosphate contents were used for the preparation of PMMA/bioglass hybrid matrices. Since the lack of adhesion between the two phases impedes the homogenous composite formation, a silane coupling agent such as 3-(trimethoxysilyl)propyl methacrylates (MPMA) was incorporated into the polymer structure. The effect of addition of MPMA on the molecular structure of composite was investigated. Furthermore, the presence of MPMA in the system improved the homogeneity of sample. Increasing phosphate content in the inorganic segment of hybrid up to 10 mol% resulted in the formation of apatite layer on the surface; hence the hybrid was bioactive and suitable candidate for bone tissue engineering.

  16. Synthesis, neutralization and blocking procedures of organic/inorganic hybrid scaffolds for bone tissue engineering applications.

    PubMed

    Costa, Hermes S; Stancioli, Edel F B; Pereira, Marivalda M; Oréfice, Rodrigo L; Mansur, Herman S

    2009-02-01

    Bioactive glasses (BaG) can bind to human bone tissues and have been used in many biomedical applications for the last 30 years. However they usually are weak and brittle. On the other hand, composites that combine polymers and BaG are of particular interest, since they often show an excellent balance between stiffness and toughness. Bioactive glass-poly(vinyl alcohol) foams to be used in tissue engineering applications were previously developed by our group, using the sol-gel route. Since bioactive glass-polymer composite derived from the sol-gel process cannot be submitted to thermal treatments at high temperatures (above 400 degrees C), they usually have unreacted species that can cause cytotoxicity. This work reports a technique for stabilizing the sol-gel derived bioactive glass/poly(vinyl alcohol) hybrids by using glutaraldehyde (GA), NH(4)OH solutions and a blocking solution containing bovine serum albumin. PVA/BaG/GA hybrids were characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM/EDX) analyses. Moreover, MTT (3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide) biocompatibility and cytotoxicity assays were also conducted. The hybrids exhibited pore size varying from 80 to 820 mum. After treatments, no major changes in the pore structure were observed and high levels of cell viability were obtained.

  17. Gold nanoparticles embedded in organic/inorganic hybrid matrix: electrical and electrochemical behavior (withdrawal notice)

    NASA Astrophysics Data System (ADS)

    Moreira, Sandra D. F. C.; Silva, J. P. B.; Silva, Carlos J. R.; Capan, I.; Gomes, M. J. M.; Costa, Manuel F. M.

    2013-05-01

    Gold nanoparticles (AuNPs) with different diameters, from 3 to 32 nm, were immobilized in amine-alcohol-silicate matrix by mixing a preformed nanoparticle colloid with the precursors of amine-alcohol-silicate (AAs) prior to the solgel transition. These nanocomposites show high optical quality and optical features dictated by the size of the nanoparticle dopants but also present a high degree of flexibility which can largely enhance the range of practical applications. The current-voltage, impedance and capacitance-voltage characteristics of these materials have been measured. The electrochemical and impedimetric results reveal that AuNPs with different sizes give different signals, thus providing useful information that allows the employment of AuNPs in electrochemical biosensors. Capacitance- voltage measurements showed that these composites embedded AuNPs exhibited a large hysteresis window of 2.4V which indicates the possibility of charge storage in the Au nanoparticles embedded AAs hybrids.

  18. Observation and Mediation of the Presence of Metallic Lead in Organic-Inorganic Perovskite Films.

    PubMed

    Sadoughi, Golnaz; Starr, David E; Handick, Evelyn; Stranks, Samuel D; Gorgoi, Mihaela; Wilks, Regan G; Bär, Marcus; Snaith, Henry J

    2015-06-24

    We have employed soft and hard X-ray photoelectron spectroscopies to study the depth-dependent chemical composition of mixed-halide perovskite thin films used in high-performance solar cells. We detect substantial amounts of metallic lead in the perovskite films, which correlate with significant density of states above the valence band maximum. The metallic lead content is higher in the bulk of the perovskite films than at the surface. Using an optimized postanneal process in air, we can reduce the metallic lead content in the perovskite film. This process reduces the amount of metallic lead and a corresponding increase in the photoluminescence quantum efficiency of the perovskite films can be observed. This correlation indicates that metallic lead impurities are likely a key defect whose concentration can be controlled by simple annealing procedures in order to increase the performance for perovskite solar cells.

  19. Synthesis of organic/inorganic hybrid gel with acid activated clay after γ-ray radiation.

    PubMed

    Kim, Donghyun; Lee, Hoik; Sohn, Daewon

    2014-08-01

    A hybrid gel was prepared from acid activated clay (AA clay) and acrylic acid by gamma ray irradiation. Irradiated inorganic particles which have peroxide groups act as initiator because it generates oxide radicals by increasing temperature. Inorganic nanoparticles which are rigid part in hybrid gel also contribute to increase the mechanical property as a crosslinker. We prepared two hybrid gels to compare the effect of acid activated treatment of clay; one is synthesized with raw clay particles and another is synthesized with AA clay particles. The composition and structure of AA clay particles and raw clay particles were confirmed by X-ray diffraction (XRD), X-ray fluorescence instrument and surface area analyzer. And chemical and physical property of hybrid gel with different ratios of acrylic acid and clay particle was tested by Raman spectroscope and universal testing machine (UTM). The synthesized hydrogel with 76% gel contents can elongated approximately 1000% of its original size.

  20. Organic/inorganic nanocomposites, methods of making, and uses as a permeable reactive barrier

    DOEpatents

    Harrup, Mason K.; Stewart, Frederick F.

    2007-05-15

    Nanocomposite materials having a composition including an inorganic constituent, a preformed organic polymer constituent, and a metal ion sequestration constituent are disclosed. The nanocomposites are characterized by being single phase, substantially homogeneous materials wherein the preformed polymer constituent and the inorganic constituent form an interpenetrating network with each other. The inorganic constituent may be an inorganic oxide, such as silicon dioxide, formed by the in situ catalyzed condensation of an inorganic precursor in the presence of the solvated polymer and metal ion sequestration constituent. The polymer constituent may be any hydrophilic polymer capable of forming a type I nanocomposite such as, polyacrylonitrile (PAN), polyethyleneoxide (PEO), polyethylene glycol (PEG), polyvinyl acetate (PVAc), polyvinyl alcohol (PVA), and combinations thereof. Nanocomposite materials of the present invention may be used as permeable reactive barriers (PRBs) to remediate contaminated groundwater. Methods for making nanocomposite materials, PRB systems, and methods of treating groundwater are also disclosed.

  1. A mesoporous hydrogen-bonded organic-inorganic framework bearing the isopolymolybdate [Mo36O112(OH2)16]8-.

    PubMed

    Atencio, Reinaldo; Briceño, Alexander; Galindo, Xacvier

    2005-02-07

    The mesoporous H-bonded organic-inorganic hybrid material is built up from the assembly of the isopolymolybdate [Mo36O112(OH2)16]8- and H2bipy2+, which displays large interconnected cavities and exhibits a reversible water sorption behaviour while maintaining its striking crystal integrity.

  2. Organic-inorganic hybrid materials: nanoparticle containing organogels with myriad applications.

    PubMed

    Peveler, William J; Bear, Joseph C; Southern, Paul; Parkin, Ivan P

    2014-11-28

    The synthesis of hybrid inorganic-organic materials from a single-component organogelator is reported. Varied functional inorganic materials were included and the resultant physico-chemical properties of the gels are presented. These materials are quick, versatile, can be cast into virtually any form, and the nanoparticles are easily reclaimed.

  3. Pervaporation Separation of Water-Ethanol Mixtures Using Organic-Inorganic Nanocomposite Membranes

    EPA Science Inventory

    Preyssler type heteropolyacid viz., H14[NaP5W30O110] incorporated chitosan nanocomposite membranes (NCMs) were prepared by solution casting, characterized using a variety of techniques and employed in the pervaporation separation of water-ethanol mixtures as a function of feed wa...

  4. Pervaporation Separation of Water-Ethanol Mixtures Using Organic-Inorganic Nanocomposite Membranes

    EPA Science Inventory

    Preyssler type heteropolyacid viz., H14[NaP5W30O110] incorporated chitosan nanocomposite membranes (NCMs) were prepared by solution casting, characterized using a variety of techniques and employed in the pervaporation separation of water-ethanol mixtures as a function of feed wa...

  5. Laboratory investigations of mixed organic/inorganic particles: Ice nucleation and optical hygroscopic growth

    NASA Astrophysics Data System (ADS)

    Beaver, Melinda R.

    The interactions of ambient aerosol particles with the atmosphere influence global climate and local visibility. Many of these atmospheric interactions are determined by the chemical composition of the aerosol particles. Ice nucleation in the upper troposphere is influenced and modified by the presence of anthropogenic aerosol particles. Also, interactions between particles and solar radiation are influenced by hygroscopic growth upon humidification. This thesis contains laboratory investigations into the role organic compounds play in ice nucleation and optical hygroscopic growth. Using an aerosol flow tube apparatus, we have studied the effects of aliphatic aldehydes (C3 to C10) and ketones (C 3 and C9) on ice nucleation in sulfuric acid aerosols. No acid-catalyzed reactions were observed under these conditions, and physical uptake was responsible for the organic content of the sulfuric acid aerosols. The physical properties of the organic compounds (primarily the solubility and melting point) were found to play a dominant role in determining the inferred mode of nucleation (homogenous or heterogeneous) and the specific freezing temperatures observed. Overall, very soluble, low-melting organics, such as acetone and propanal, caused a decrease in aerosol ice nucleation temperatures when compared with aqueous sulfuric acid aerosol. In contrast, sulfuric acid particles exposed to organic compounds of eight carbons and greater, of much lower solubility and higher melting temperatures, nucleate ice at temperatures above aqueous sulfuric acid aerosols. Organic compounds of intermediate carbon chain length, C4-C7, (of intermediate solubility and melting temperatures) nucleated ice at the same temperature as aqueous sulfuric acid aerosols. Light extinction by atmospheric particles is strongly dependent on the size, chemical composition, and water content of the aerosol. Since light extinction by particles directly impacts climate and visibility, measurements of

  6. Bifunctionalized organic-inorganic charged nanocomposite membrane for pervaporation dehydration of ethanol.

    PubMed

    Tripathi, Bijay P; Kumar, Mahendra; Saxena, Arunima; Shahi, Vinod K

    2010-06-01

    Chitosan was modified into N-p-carboxy benzyl chitosan (NCBC) by introducing an aromatic ring grafted with acidic -COOH group and highly stable and cross-linked nanostructured NCBC-silica composite membranes were prepared for pervaporation dehydration of water-ethanol mixture. These membranes were tailored to comprise three regions namely: hydrophobic region, highly charged region and selective region, in which weak acidic group (-COOH) was grafted at organic segment while strong acidic group (-SO(3)H) was grafted at inorganic segment to achieve high stability and less swelling in water-ethanol mixture. Cross-linking density and NCBC-silica content in membrane matrix has been systematically optimized to control the nanostructure of the developed polymer matrix for studying the effects of molecular structure on the swelling, and PV performance. Among prepared membranes, nanocomposite membrane with 3h cross-linking time and 90% (w/w) of NCBC-silica content (PCS-3-3) exhibited 1.66×10(-4)cm(3)(STP) cm/cm(2) s cmHg water permeability (P(W)), while 1.35×10(-7) cm(3)(STP) cm/cm(2) s cmHg ethanol permeability (P(EtOH)) of developed membrane and 1231 PV selectivity factor at 30 °C for separating water from 90% (w/w) ethanol mixture.

  7. Bioactive organic-inorganic poly(CLMA-co-HEA)/silica nanocomposites.

    PubMed

    Ivashchenko, Sergiy; Escobar Ivirico, Jorge L; García Cruz, Dunia M; Campillo-Fernández, Alberto; Gallego Ferrer, Gloria; Monleón Pradas, Manuel

    2015-03-01

    A series of novel poly(CLMA-co-HEA)/silica nanocomposites is synthesized from caprolactone 2-(methacryloyloxy)ethyl ester (CLMA) and 2-hydroxyethyl acrylate (HEA) as organic comonomers and the simultaneous sol-gel polymerization of tetraethyloxysilane (TEOS) as silica precursor, in different mass ratios up to a 30 wt% of silica. The nanocomposites are characterized as to their mechanical and thermal properties, water sorption, bioactivity and biocompatibility, reflecting the effect on the organic matrix provided by the silica network formation. The nanocomposites nucleate the growth of hydroxyapatite (HAp) on their surfaces when immersed in the simulated body fluid of the composition used in this work. Proliferation of the MC3T3 osteoblast-like cells on the materials was assessed with the MTS assay showing their biocompatibility. Immunocytochemistry reveals osteocalcin and type I collagen production, indicating that osteoblast differentiation was promoted by the materials, and calcium deposition was confirmed by von Kossa staining. The results indicate that these poly(CLMA-co-HEA)/silica nanocomposites could be a promising biomaterial for bone tissue engineering. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  8. Unraveling the Role of Monovalent Halides in Mixed-Halide Organic-Inorganic Perovskites.

    PubMed

    Deepa, Melepurath; Ramos, F Javier; Shivaprasad, S M; Ahmad, Shahzada

    2016-03-16

    The performance of perovskite solar cells is strongly influenced by the composition and microstructure of the perovskite. A recent approach to improve the power conversion efficiencies utilized mixed-halide perovskites, but the halide ions and their roles were not directly studied. Unraveling their precise location in the perovskite layer is of paramount importance. Here, we investigated four different perovskites by using X-ray photoelectron spectroscopy, and found that among the three studied mixed-halide perovskites, CH3 NH3 Pb(I0.74 Br0.26 )3 and CH3 NH3 PbBr3-x Clx show peaks that unambiguously demonstrate the presence of iodide and bromide in the former, and bromide and chloride in the latter. The CH3 NH3 PbI3-x Clx perovskite shows anomalous behavior, the iodide content far outweighs that of the chloride; a small proportion of chloride, in all likelihood, resides deep within the TiO2 /absorber layer. Our study reveals that there are many distinguishable structural differences between these perovskites, and that these directly impact the photovoltaic performances.

  9. Supramolecular Assembly of Organic-Inorganic Hybrid Polyoxometalate Nanoclusters at Solid-liquid Interface

    NASA Astrophysics Data System (ADS)

    Qi, Na; Jing, Benxin; Zhu, Yingxi

    2013-03-01

    Polyoxometalate (POM) inorganic nanoclusters have recently emerged as building blocks for the design and synthesis of novel functional materials for broad applications ranging from catalysis to nanomedicines. Rather than taking the slow self-assembly of POMs in aqueous solutions, we have investigated the assembly of hybrid Anderson-type Mo-based POMs with organic ligands at a solid surface by Langmuir-Blodgett (LB) deposition and characterized the films by AFM, TEM, and X-ray diffraction. We have observed the formation of well-ordered monolayer or bilayer consisting of periodic arrangement of hybrid POM nanoclusters, showing a strong dependence on substrate chemistry and LB compression pressure. The controlled assembly of hybrid POM nanocluster films by LB deposition could be used as a template with stoichiometric crystalline nanostructure to the programmed assembly of novel multi-functional supramolecular complexes.

  10. New highly fluorescent biolabels based on II VI semiconductor hybrid organic inorganic nanostructures for bioimaging

    NASA Astrophysics Data System (ADS)

    Santos, B. S.; Farias, P. M. A.; Menezes, F. D.; Brasil, A. G., Jr.; Fontes, A.; Romão, L.; Amaral, J. O.; Moura-Neto, V.; Tenório, D. P. L. A.; Cesar, C. L.; Barbosa, L. C.; Ferreira, R.

    2008-11-01

    Semiconductor quantum dots based on II-VI materials may be prepared to develop good biolabeling properties. In this study we present some well-succeeded results related to the preparation, functionalization and bioconjugation of CdY (Y = S, Se and Te) to biological systems (live cells and fixed tissues). These nanostructured materials were prepared using colloidal synthesis in aqueous media resulting nanoparticles with very good optical properties and an excellent resistance to photodegradation.

  11. Protein micropatterning on bifunctional organic-inorganic sol-gel hybrid materials.

    PubMed

    Kim, Woo-Soo; Kim, Min-Gon; Ahn, Jun-Hyeong; Bae, Byeong-Soo; Park, Chan Beum

    2007-04-24

    Active protein micropatterns and microarrays made by selective localization are popular candidates for medical diagnostics, such as biosensors, bioMEMS, and basic protein studies. In this paper, we present a simple fabrication process of thick (approximately 20 microm) protein micropatterning using capillary force lithography with bifunctional sol-gel hybrid materials. Because bifunctional sol-gel hybrid material can have both an amine function for linking with protein and a methacryl function for photocuring, proteins such as streptavidin can be immobilized directly on thick bifunctional sol-gel hybrid micropatterns. Another advantage of the bifunctional sol-gel hybrid materials is the high selective stability of the amine group on bifunctional sol-gel hybrid patterns. Because amine function is regularly contained in each siloxane oligomers, immobilizing sites for streptavidin are widely distributed on the surface of thick hybrid micropatterns. The micropatterning processes of active proteins using efficient bifunctional sol-gel hybrid materials will be useful for the development of future bioengineered systems because they can save several processing steps and reduce costs.

  12. Testing the functional significance of microbial community composition.

    Treesearch

    Michael S. Strickland; Christian Lauber; Noah Fierer; Mark A. Bradford

    2009-01-01

    A critical assumption underlying terrestrial ecosystem models is that soil microbial communities, when placed in a common environment, will function in an identical manner regardless of the composition...

  13. Nb-Ta, Nb-Mo and Nb-V oxides prepared from hybrid organic-inorganic precursors

    SciTech Connect

    Deligne, N.; Bayot, D.; Degand, M.; Devillers, M.

    2007-07-15

    New hybrid organic-inorganic materials based on group 5 elements and a well-defined polymeric matrix have been prepared and used as precursors for Nb-Ta and Nb-Mo mixed oxides. In this non-conventional but easily accessible route to multimetallic oxides, a copolymer of N,N-diallyl-N-hexylamine and maleic acid was synthesised and used as matrix to stabilise inorganic species generated in solution from (NH{sub 4}){sub 6}Mo{sub 7}O{sub 24}.4H{sub 2}O, NH{sub 4}VO{sub 3} (gu){sub 3}[Nb(O{sub 2}){sub 4}] and (gu){sub 3}[Ta(O{sub 2}){sub 4}]. Solid-state studies indicate that the homogeneity of the blends can be kept up to about 0.5 mol Nb{sup V} and Ta{sup V} and 0.25 mol V{sup V} per mol of repeat units of the copolymer. The calcination conditions of these homogeneous hybrid precursors were optimised to produce Nb-Mo, Nb-Ta and Nb-V oxides. While the thermal treatment of the Nb-V hybrid blends led only to a mixture of different phases, the characterisation of the final phases by X-ray diffraction (XRD) proved the formation of pure Nb{sub 2}Mo{sub 3}O{sub 14} and showed that Nb-Ta oxides could be synthesised as single phases corresponding to a continuous series of solid solutions. - Graphical abstract: An alternative route based on hybrid organic-inorganic materials was implemented to synthesise Nb-Ta, Nb-Mo and Nb-V oxides. The hybrid materials were prepared by incorporation of inorganic salts based on Nb{sup V}, Ta{sup V}, V{sup V} and Mo{sup VI} in an organic polymer bearing cationic as well as anionic moieties. A thermal treatment of these hybrid blends has allowed the formation of multimetallic oxides.

  14. Spatial Electron-hole Separation in a One Dimensional Hybrid Organic-Inorganic Lead Iodide.

    PubMed

    Savory, Christopher N; Palgrave, Robert G; Bronstein, Hugo; Scanlon, David O

    2016-02-09

    The increasing efficiency of the inorganic-organic hybrid halides has revolutionised photovoltaic research. Despite this rapid progress, the significant issues of poor stability and toxicity have yet to be suitably overcome. In this article, we use Density Functional Theory to examine (Pb2I6) · (H2DPNDI) · (H2O) · (NMP), an alternative lead-based hybrid inorganic-organic solar absorber based on a photoactive organic cation. Our results demonstrate that optical properties suitable for photovoltaic applications, in addition to spatial electron-hole separation, are possible but efficient charge transport may be a limiting factor.

  15. Organic/inorganic hybrid synaptic transistors gated by proton conducting methylcellulose films

    NASA Astrophysics Data System (ADS)

    Wan, Chang Jin; Zhu, Li Qiang; Wan, Xiang; Shi, Yi; Wan, Qing

    2016-01-01

    The idea of building a brain-inspired cognitive system has been around for several decades. Recently, electric-double-layer transistors gated by ion conducting electrolytes were reported as the promising candidates for synaptic electronics and neuromorphic system. In this letter, indium-zinc-oxide transistors gated by proton conducting methylcellulose electrolyte films were experimentally demonstrated with synaptic plasticity including paired-pulse facilitation and spatiotemporal-correlated dynamic logic. More importantly, a model based on proton-related electric-double-layer modulation and stretched-exponential decay function was proposed, and the theoretical results are in good agreement with the experimentally measured synaptic behaviors.

  16. Organic/inorganic hybrid synaptic transistors gated by proton conducting methylcellulose films

    SciTech Connect

    Wan, Chang Jin; Wan, Qing E-mail: yshi@nju.edu.cn; Zhu, Li Qiang; Wan, Xiang; Shi, Yi E-mail: yshi@nju.edu.cn

    2016-01-25

    The idea of building a brain-inspired cognitive system has been around for several decades. Recently, electric-double-layer transistors gated by ion conducting electrolytes were reported as the promising candidates for synaptic electronics and neuromorphic system. In this letter, indium-zinc-oxide transistors gated by proton conducting methylcellulose electrolyte films were experimentally demonstrated with synaptic plasticity including paired-pulse facilitation and spatiotemporal-correlated dynamic logic. More importantly, a model based on proton-related electric-double-layer modulation and stretched-exponential decay function was proposed, and the theoretical results are in good agreement with the experimentally measured synaptic behaviors.

  17. Functional properties of teff and oat composites

    USDA-ARS?s Scientific Manuscript database

    Teff-oat composites were developed using gluten free teff flour containing essential amino acids and minerals along with oat products containing ß-glucan known for lowering blood cholesterol. Teff-oat composites were evaluated for their pasting and rheological properties by a Rapid Visco Analyzer (R...

  18. Flexible hydrogel-based functional composite materials

    DOEpatents

    Song, Jie; Saiz, Eduardo; Bertozzi, Carolyn R; Tomasia, Antoni P

    2013-10-08

    A composite having a flexible hydrogel polymer formed by mixing an organic phase with an inorganic composition, the organic phase selected from the group consisting of a hydrogel monomer, a crosslinker, a radical initiator, and/or a solvent. A polymerization mixture is formed and polymerized into a desired shape and size.

  19. Computational molecular design of polyhedral oligomeric silsesquioxane based organic-inorganic hybrid semiconductors

    NASA Astrophysics Data System (ADS)

    Qi, Feng

    Cubic silsesquioxanes (T8 SQs), with the formula of [RSiO1.5] 8, enable advanced materials design. In this thesis, a computational materials science framework, including ab initio density functional theory (DFT) calculations, molecular dynamics (MD), and Monte Carlo (MC) simulations, was developed to perform computational molecular design and crystal engineering of silsesquioxane based diacene-SQ and then octa(halogenphenyl)-SQ molecular systems. The goal of this project was to identify novel molecular architectures, a priori, that exhibit targeted self-assembly behaviors and result in materials with improved electronic properties. First, existing force fields, including our in house charge transfer reactive (CTR) force field, and COMPASS, were evaluated for simulating cubic silsesquioxane systems. All force fields reproduced the experimental structure of SQ-based crystals very well. However, only the FLX force field reproduced the experimentally observed vibrational properties and thermodynamic behavior. Next, targeting materials performance, such as high electronic mobility, a series of diacene-SQ molecules were designed and their crystal structures predicted by following the computational molecular design recipe that accounts for transport theory, symmetry relationships, polymorph prediction procedures, and solid state electronic property evaluation methods. Computationally derived diacene-SQ crystals are predicted to exhibit advanced electronic properties, such as very small band gaps and parallel packing of the acene groups in crystal structures, indicating excellent transport properties, as well as improved thermal and mechanical properties. Finally, a series of new small-band gap octa(halogenphenyl)-SQ molecular systems were identified by computationally exploring alternative architectures and functionalization of recently synthesized octa(halogenphenyl)-SQ crystals. These hybrid molecular crystals also feature other unique properties, such as solution

  20. Designing and nanoscale engineering of organic/inorganic electronic materials for organic light-emitting diodes

    NASA Astrophysics Data System (ADS)

    Cui, Ji

    2001-07-01

    Organic light-emitting diodes (OLEDs) have been intensively studied due to their emerging applications in flat panel display technologies. The motivation of the present research has been the desire to (a) explore new routes to OLED functional layers with rigorous control of layer properties; (b) probe the effects of OLED anode-hole transport layer interfacial energetics on charge injection, luminous efficiency; (c) acquire micron-scale multicolor OLED pixels for potential high resolution OLED display application; (d) better understand and further improve charge injection into molecular and macromolecular solids by designing and implementing novel OLED anode materials. In the first part, a spin-coating/siloxane cross-linking approach has been applied to OLED charge transport layers which provides a high throughput route to robust, pinhole-free, adherent thin films with covalently interlinked, glassy structures (Chapter 2). In anode-hole transport layer contact study (Chapter 3), it is shown that integrity of electrode/organic interfacial contact is crucial to the performance and stability of organic light emitting diodes (OLEDs). It is demonstrated that self-assembled or spincoated nm-scale thick silane derived hole transport layer on ITO can effectively prevent de-wetting of the vapor deposited TPD hole transport layers (Chapter 3), leading to significantly enhanced light output (15,000 cd/m2), luminous efficiency (1.2%), and thermal stability (up to 110°C). In applying soft lithography techniques to OLED micro-patterning, we designed and implemented high temperature micro-contact printing, which readily affords pixel features down to 1.0 micron dimensions, and which, by virtue of the length scale-dependent carrier tunneling through SAM structures, affords tenability in luminescence patterns (Chapter 4). To facilitate hole injection at anode side of OLED, MOCVD derived, highly transparent, high work function thin film TCO materials is synthesized and employed as

  1. Strain tuning of ferroelectric polarization in hybrid organic inorganic perovskite compounds.

    PubMed

    Ghosh, Saurabh; Di Sante, Domenico; Stroppa, Alessandro

    2015-11-19

    Metal-organic frameworks (MOFs) are hybrid crystalline compounds comprised of an extended ordered network made up of organic molecules, organic linkers and metal cations. In particular, MOFs with the same topology as inorganic perovskites have been shown to possess interesting properties, e.g., coexistence of ferroelectric and magnetic ordering. Using first-principles density functional theory, we have investigated the effect of strain on the compounds C(NH2)3Cr(HCOO)3 and (CH3CH2NH3)Mn(HCOO)3. Here, we show that compressive strain can substantially increase the ferroelectric polarization by more than 300%, and we discuss the mechanism involved in the strain enhancement of polarization. Our study highlights the complex interplay between strain and organic cations' dipoles and put forward the possibility of tuning of ferroelectric polarization through appropriate thin film growing.

  2. UV/Vis visible optical waveguides fabricated using organic-inorganic nanocomposite layers.

    PubMed

    Simone, Giuseppina; Perozziello, Gerardo

    2011-03-01

    Nanocomposite layers based on silica nanoparticles and a methacrylate matrix are synthesized by a solvent-free process and characterized in order to realize UV/Vis transparent optical waveguides. Chemical functionalization of the silica nanoparticles permits to interface the polymers and the silica. The refractive index, roughness and wettability and the machinability of the layers can be tuned changing the silica nanoparticle concentration and chemical modification of the surface of the nanoparticles. The optical transparency of the layers is affected by the nanoparticles organization between the organic chains, while it increased proportionally with respect to silica concentration. Nanocomposite layers with a concentration of 40 wt% in silica reached UV transparency for a wavelength of 250 nm. UV/Vis transparent waveguides were micromilled through nanocomposite layers and characterized. Propagation losses were measured to be around 1 dB cm(-1) at a wavelength of 350 nm.

  3. Self-organized pattern formation at organic-inorganic interfaces during deposition: Experiment versus modeling

    NASA Astrophysics Data System (ADS)

    Szillat, F.; Mayr, S. G.

    2011-09-01

    Self-organized pattern formation during physical vapor deposition of organic materials onto rough inorganic substrates is characterized by a complex morphological evolution as a function of film thickness. We employ a combined experimental-theoretical study using atomic force microscopy and numerically solved continuum rate equations to address morphological evolution in the model system: poly(bisphenol A carbonate) on polycrystalline Cu. As the key ingredients for pattern formation, (i) curvature and interface potential driven surface diffusion, (ii) deposition noise, and (iii) interface boundary effects are identified. Good agreement of experiments and theory, fitting only the Hamaker constant and diffusivity within narrow physical parameter windows, corroborates the underlying physics and paves the way for computer-assisted interface engineering.

  4. Non-magnetic organic/inorganic spin injector at room temperature

    SciTech Connect

    Mathew, Shinto P.; Mondal, Prakash Chandra; Naaman, Ron; Moshe, Hagay; Mastai, Yitzhak

    2014-12-15

    Spin injection into solid-state devices is commonly performed by use of ferromagnetic metal electrodes. Here, we present a spin injector design without permanent magnet; rather, the spin selectivity is determined by a chiral tunneling barrier. The chiral tunneling barrier is composed of an ultrathin Al{sub 2}O{sub 3} layer that is deposited on top of a chiral self-assembled monolayer (SAM), which consists of cysteine or oligopeptide molecules. The experimentally observed magnetoresistance can be up to 20% at room temperature, and it displays an uncommon asymmetric curve as a function of the applied magnetic field. These findings show that the spin injector transmits only one spin orientation, independent of external magnetic field. The sign of the magnetoresistance depends on the handedness of the molecules in the SAM, which act as a spin filter, and the magnitude of the magnetoresistance depends only weakly on temperature.

  5. Electronic Structure of Organic/Inorganic Interfaces: Insights from First Principles Calculations

    NASA Astrophysics Data System (ADS)

    Segev, Lior

    Electronic devices based on molecules draw a lot of attention in both scientific and industrial activities. Molecules in electronic devices can serve as the heart of the device, featuring versatile physical properties i.e. electronical, optical, magnetic, etc. Molecules can also function as an assist mechanism in which the electronic properties of the underlying material are modified in a predictable fashion according to the molecular monolayer properties. But, the route to applications in both these directions lies in answering fundamental questions related to band offsets between two materials, full electronic structure determination of molecule and substrates, work function modifications, etc. To tackle these questions, we chose to study the interface formed by an alkyl monolayer adsorbed on a Si substrate by utilizing two ab initio methods. First, the density functional theory (DFT) utilizing the local density or the B3LYP approximations for the exchange-correlation potential and, second, the many-body perturbation theory based on the GW approximation. We adapted a "divide and conquer" approach to our system by simulating the infinite counterpart, polyethylene, of our finite alkyl chain to test how the band gap of the two molecules changes when moving from an infinite 1D molecule to a finite length molecule. We find excellent agreement between our GW simulation results for polyethylene and experimental results for the bandstructure, ionization potential and band gap values. From DFT simulations, we analyze the ultra-violet photoelectron spectra (UPS) of odd and even number of carbons alkyl chains and identify the origin of their differences in spectral signature. GW simulations of the full alkyl monolayer/Si(111) system reveal that the projected density of states (DOS) of the upper alkyl chain have an excellent agreement to experimental UPS and inverse-photoemission spectra results. Based on this correspondence, we find the band alignment between the alkyl

  6. Role of surface functionality on the formation of raspberry-like polymer/silica composite particles: Weak acid-base interaction and steric effect

    NASA Astrophysics Data System (ADS)

    Wang, Lan; Song, LinYong; Chao, ZhiYin; Chen, PengPeng; Nie, WangYan; Zhou, YiFeng

    2015-07-01

    The surface functionality of polymer microspheres is the crucial factor to determine the nucleation and growth of silica particles and to construct the organic/inorganic hierarchical structures. The objective of this work was to evaluate the surface functionality and hierarchical morphology relationship via in situ sol-gel reaction. Carboxylic-functionalized poly (styrene-co-maleic anhydride) [P(S-co-MA)], poly(ethylene glycol)-functionalized poly(styrene-co-poly(ethylene glycol) methacrylate) [P(S-co-PEGMA)], and hybrid functionalized poly(styrene-co-maleic anhydride-co-poly(ethylene glycol) methacrylate) [P(S-co-MA-co-PEGMA)] microspheres were synthesized by emulsifier-free polymerization and used as templates. The morphologies of the composite particles were observed by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results showed that core-shell structure was obtained with P(S-co-MA) as templates; raspberry-like structure was observed by using P(S-co-MA-co-PEGMA) as templates; and no silica particles were attached onto the surface of P(S-co-PEGMA) microspheres. These results indicated that the carboxylic groups on the surface formed by hydrolysis of anhydride groups were the determinate factor to control the nucleation of silica nanoparticles, and the PEG chains on the surface can affect the growth of silica particles. In addition, the particulate films were constructed by assembling these composite particles on glass substrates and modified with dodecyltrichlorosilane, the contact angles of water on the dual-sized structured surface were up to 160°.

  7. Photophysical Analysis of the Formation of Organic-Inorganic Trihalide Perovskite Films: Identification and Characterization of Crystal Nucleation and Growth.

    PubMed

    Anaya, Miguel; Galisteo-López, Juan F; Calvo, Mauricio E; López, Cefe; Míguez, Hernán

    2016-02-11

    In this work we demonstrate that the different processes occurring during hybrid organic-inorganic lead iodide perovskite film formation can be identified and analyzed by a combined in situ analysis of their photophysical and structural properties. Our observations indicate that this approach permits unambiguously identifying the crystal nucleation and growth regimes that lead to the final material having a cubic crystallographic phase, which stabilizes to the well-known tetragonal phase upon cooling to room temperature. Strong correlation between the dynamic and static photoemission results and the temperature-dependent X-ray diffraction data allows us to provide a description and to establish an approximate time scale for each one of the stages and their evolution. The combined characterization approach herein explored yields key information about the kinetics of the process, such as the link between the evolution of the defect density during film formation, revealed by a fluctuating photoluminescence quantum yield, and the gradual changes observed in the PbI2-related precursor structure.

  8. A metallocene molecular complex as visible-light absorber for high-voltage organic-inorganic hybrid photovoltaic cells.

    PubMed

    Ishii, Ayumi; Miyasaka, Tsutomu

    2014-04-14

    A thin solid-state dye-sensitized photovoltaic cell is fabricated by composing organic and inorganic heterojunctions in which the visible-light sensitizers are cyclopentadiene derivatives (Cp*) coordinated to a metal oxide, typically TiO2. The coordination bonds of the metallocene molecular complex (Ti-Cp*) create a new LMCT (ligand-to-metal charge transfer) absorption band and induce a rectified charge transfer from the organic ligands to TiO2, leading to photocurrent generation. Photovoltaic junctions are completed by coating crystalline organic molecules (perylene) as a hole-transport layer on the Cp*-coordinated TiO2 surface by using the vapor deposition method. The molecular plane of Cp* on the TiO2 surfaces seems to help the hole-transport layer to form ordered structures, which effectively improve carrier conductivities and minimize interfacial resistance. The organic-inorganic hybrid thin-film photocell with metallocene molecular complexes is capable of generating high open-circuit voltages exceeding 1.2 V. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Organic-inorganic hybrid fluorous monolithic capillary column for selective solid-phase microextraction of perfluorinated persistent organic pollutants.

    PubMed

    Xiong, Xiyue; Yang, Zihui; Huang, Yongbin; Jiang, Linbo; Chen, Yingzhuang; Shen, Yao; Chen, Bo

    2013-03-01

    A novel construction strategy of monolithic capillary column for selectively enriching perfluorinated persistent organic pollutants was proposed. The organic-inorganic hybrid fluorous monolithic capillary column was synthesized by a "one-pot" approach via the polycondensation of γ-methacryloxypropyltrimethoxy-silane, then in situ copolymerization of 1H,1H,7H-dodecafluoroheptyl methacrylate and vinyl group on the precondensed siloxanes. The obtained monolithic columns were systematically characterized. The results demonstrated that the optimal column possessed good mechanical stability and high permeability. The adsorption capacities of the optimized monolithic column for perfluorooctanoic acid and perfluorooctane sulfonate were 0.257 and 0.513 μg/mg, respectively. Adsorption capacities of the monoliths were proved to increasing with increasing the amounts of fluorinated monomers in the fluorous monoliths. Sodium 1-octanesulfonate, as a comparison compound, was hardly adsorbed on the fluorous monolith. In addition, the trace amounts of perfluorooctanoic acid and perfluorooctane sulfonate in water samples can be successfully concentrated about 160 times to their original concentrations by this monolithic column. These results demonstrated that the capacity and selectivity of the affinity fluorous column is high and can be applied to the selective enrichment for the perfluorinated persistent organic pollutants from environmental samples.

  10. Hybrid organic/inorganic copolymers with strongly hydrogen-bond acidic properties for acoustic wave and optical sensors

    SciTech Connect

    Grate, J.W.; Kaganove, S.N.; Patrash, S.J.

    1997-05-01

    Hybrid organic/inorganic polymers have been prepared incorporating fluoroalkyl-substituted bisphenol groups linked using oligosiloxane spacers. These hydrogen-bond acidic materials have glass-to-rubber transition temperatures below room temperature and are excellent sorbents for basic vapors. The physical properties such as viscosity and refractive index can be tuned by varying the length of the oligosiloxane spacers and the molecular weight. In addition, the materials are easily cross-linked to yield solid elastomers. The potential use of these materials for chemical sensing has been demonstrated by applying them to surface acoustic wave devices as thin films and detecting the hydrogen-bond basic vapor dimethyl methylphosphonate with high sensitivity. It has also been demonstrated that one of these materials with suitable viscosity and refractive index can be used to clad silica optical fibers; the cladding was applied to freshly drawn fiber using a fiber drawing tower. These fibers have potential as evanescent wave optical fiber sensors. 38 refs., 2 figs.

  11. Use of cysteine-modified TiO{sub 2} photocatalyst for treatment of combined organic/inorganic wastewaters

    SciTech Connect

    Peters, R.W.; Wu, J.M.; Meshkov, N.; Thurnauer, M.C.; Ostafin, A.G.

    1995-03-01

    The utilization of semiconductor-based photocatalysts, such as titanium dioxide (TiO{sub 2}), for carrying out photochemical reactions to treat water contaminated with organic and inorganic compounds has received considerable attention in recent years. The authors strategy for optimizing the process of photocatalytic reduction of heavy metals on TiO{sub 2} colloids involves modifying the colloid surface. Specific project objectives included: (1) identification and development of potential biomimetic photocatalysts for simultaneous heavy metal recovery and organic destruction; (2) identification of treatment conditions that minimize the residual metal concentration(s) contained in the effluent, even in the presence of complexants and interferences, and development of appropriate scale-up criteria; and (3) determination of system performance, including an economic analysis for comparison with conventional technologies (such as pump-and-treat using metal hydroxide precipitation of ion exchange). The experimental results indicate that simultaneous removal of organic compounds (such as naphthalene) and inorganic compounds (such as lead ions) in aqueous solution can be achieved using a TiO{sub 2} photocatalyst system with UV light. The removal rates of organic and inorganic compounds can be enhanced through surface modification of the TiO{sub 2} photocatalyst using an organic substance such as cysteine. The cysteine-modified TiO{sub 2} photocatalyst enhanced the oxidation rates of organics as well as the reduction rates of heavy metals in the irradiated solution, resulting in improved treatment efficiencies for combined organic/inorganic wastestreams.

  12. Perovskite-Like Organic-Inorganic Hybrid Lead Iodide with a Large Organic Cation Incorporated within the Layers.

    PubMed

    Que, Chen-Jie; Mo, Chong-Jiao; Li, Zhao-Qi; Zhang, Guang-Lin; Zhu, Qin-Yu; Dai, Jie

    2017-03-06

    A great effort has been made to investigate 2D perovskites to improve the stability and controllability in the fabrication of photoelectronic devices. As far as we know, only small organic cations such as methylammonium can incorporate into the multilayered perovskite structure except the cations sandwiched between the inorganic layers. We report here a new layered lead iodide, (H2Aepz)3Pb4I14 (1), where larger organic cations, bis-protonated 2-(2-aminoethyl)pyrazole (Aepz), not only were sandwiched between the inorganic layers but also were incorporated within the perovskite-like PbI layered structure. Another 2D compound, (H2Aepz)PbI4 (2), was also prepared that was a one-layer perovskite. A simple Schottky device was prepared to investigate the photoelectroresponsive properties of the compounds in comparison with that of a typical organic-inorganic hybrid perovskite. In general, the energy gap is decreased with an increase in the perovskite layers, but the band gap of two-layered 1 is larger than that of one-layered 2. The photocurrent densities of the compounds are in the order of 1 < 2 < (CH3NH3)PbI3, which is discussed based on the crystal structures and band energy gaps.

  13. Preparation of a novel hybrid organic-inorganic monolith for the separation of lysozyme by high performance liquid chromatography.

    PubMed

    Bai, Ligai; Liu, Haiyan; Liu, Yankun; Zhang, Xinghua; Yang, Gengliang; Ma, Zhengyue

    2011-01-07

    A novel hybrid organic-inorganic monolith for high performance liquid chromatography (HPLC) was firstly developed by atom transfer radical polymerization (ATRP) by a simple and rapid method, in which vinyl ester resin was used as the monomer, natrium bisulfurosum was used both as organic adjunct and coadunate initiator to alter the activity of the free radical in the process of polymerization and then to control the molecular mass. The conditions of polymerization were optimized. The chemical group of the monolith was assayed by infrared spectra method, the morphology of monolithic material was studied by scanning electron microscopy (SEM) and the pore size distribution was determined by a mercury porosimeter. Finally, the monolith was used to separate lysozyme (Lys) from chicken egg white with good resolution and reproducibility that were obtained in a short time (10 min) by HPLC. In addition, the influences of buffer concentration and pH value on elution have been investigated and the hybrid monolith was used to separate benzene and its homologs from the mixture.

  14. Organic/inorganic hybrid pn-junction between copper phthalocyanine and CdSe quantum dot layers as solar cells

    NASA Astrophysics Data System (ADS)

    Saha, Sudip K.; Guchhait, Asim; Pal, Amlan J.

    2012-08-01

    We have introduced an organic/inorganic hybrid pn-junction for solar cell applications. Layers of II-VI quantum dots and a metal-phthalocyanine in sequence have been used as n- and p-type materials, respectively, to form a junction. The film of quantum dots has been formed through a layer-by-layer process by replacing the long-chain ligands of the nanoparticles in each ultrathin layer or a monolayer with short-chain ones so that interparticle distance becomes small leading to a decrease in resistance of the quantum dot layer. With indium tin oxide and Au as electrodes, we have formed an inverted sandwiched structure. These electrodes formed ohmic contacts with the neighboring materials. From the current-voltage characteristics of the hybrid heterostructure, we have inferred formation of a depletion region at the pn-junction that played a key role in charge separation and correspondingly a photocurrent in the external circuit. For comparison, we have also formed and characterized Schottky devices based on components of the pn-junction keeping the electrode combination same. From capacitance-voltage characteristics, we have observed that the depletion region of the hybrid pn-junction was much wider as compared to that in Schottky devices based on components of the junction.

  15. Optical properties of LaF3:Er,Yb nanoparticle-doped organic-inorganic hybrid material.

    PubMed

    Li, Tong; Zhang, Dan; Chen, Cong; Bo, Shuhui; Zhang, Daming

    2010-03-01

    Oleic acid (OA)-modified LaF3:Er,Yb nanoparticle-doped organic-inorganic hybrid material (OIHM) was prepared. The absorption spectrum and photoluminescence spectrum were analyzed. The full width at half maximum (FWHM) of the photoluminescence spectrum was about 83 nm. The Judd-Ofelt theory was used to analyze the absorption spectrum of Er3+ and obtain the intensity parameters: omega2 = 2.11 x 10(-20) cm2, omega4 = 0.78 x 10(-200 cm2, omega6 = 0.56 x 10(-20)cm2. The line strengths predict spontaneous transition probabilities, and the radiative lifetimes are calculated with the Judd-Ofelt intensity parameters. The calculated radiative lifetime of the excited 4I13/2 state of Er3+ is 13.34 ms. Based on the parameters we calculated, OA-modified LaF3:Er,Yb nanoparticle-doped OIHM is a potential material for polymeric optical waveguide amplifiers.

  16. A Simple Approach for Molecular Controlled Release based on Atomic Layer Deposition Hybridized Organic-Inorganic Layers

    NASA Astrophysics Data System (ADS)

    Boehler, Christian; Güder, Firat; Kücükbayrak, Umut M.; Zacharias, Margit; Asplund, Maria

    2016-01-01

    On-demand release of bioactive substances with high spatial and temporal control offers ground-breaking possibilities in the field of life sciences. However, available strategies for developing such release systems lack the possibility of combining efficient control over release with adequate storage capability in a reasonably compact system. In this study we present a new approach to target this deficiency by the introduction of a hybrid material. This organic-inorganic material was fabricated by atomic layer deposition of ZnO into thin films of polyethylene glycol, forming the carrier matrix for the substance to be released. Sub-surface growth mechanisms during this process converted the liquid polymer into a solid, yet water-soluble, phase. This layer permits extended storage for various substances within a single film of only a few micrometers in thickness, and hence demands minimal space and complexity. Improved control over release of the model substance Fluorescein was achieved by coating the hybrid material with a conducting polymer film. Single dosage and repetitive dispensing from this system was demonstrated. Release was controlled by applying a bias potential of ±0.5 V to the polymer film enabling or respectively suppressing the expulsion of the model drug. In vitro tests showed excellent biocompatibility of the presented system.

  17. Preparation and characterization of superhydrophobic organic-inorganic hybrid cotton fabrics via γ-radiation-induced graft polymerization.

    PubMed

    Gao, Qianhong; Hu, Jiangtao; Li, Rong; Pang, Lijuan; Xing, Zhe; Xu, Lu; Wang, Mouhua; Guo, Xiaojing; Wu, Guozhong

    2016-09-20

    A new kind of non-fluorine-based organic-inorganic hybrid superhydrophobic cotton fabric was successfully prepared by simultaneous radiation-induced graft polymerization of γ-methacryloxypropyl trimethoxy silane (MAPS) and subsequent end-capping modification with hexamethyldisilazane (HMDS). The chemical structure and surface topography of the pristine and modified cotton fabrics were investigated in detail by ATR-FTIR, XPS, (29)Si NMR, SEM and TGA to confirm that the graft reaction and end-capping modification had taken place. The above results demonstrated that the grafting polymerization and following end-capping reaction were completed, and a grafting layer was immobilized onto the surface of the cotton fabric. Surface wettability measurement and oil-water separation showed that the modified cotton surface not only exhibited the superhydrophobicity with a water contact angle of 165°, but also afforded a high efficiency of oil-water separation (96%). In particular, this modified cotton fabric retains superhydrophobicity even after 30 laundering cycles or 400 cycles of abrasion. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Novel Multifunctional Organic-Inorganic Hybrid Curing Agent with High Flame-Retardant Efficiency for Epoxy Resin.

    PubMed

    Tan, Yi; Shao, Zhu-Bao; Chen, Xue-Fang; Long, Jia-Wei; Chen, Li; Wang, Yu-Zhong

    2015-08-19

    A novel multifunctional organic-inorganic hybrid was designed and prepared based on ammonium polyphosphate (APP) by cation exchange with diethylenetriamine (DETA), abbreviated as DETA-APP. Then DETA-APP was used as flame-retardant curing agent for epoxy resin (EP). Curing behavior, including the curing kinetic parameters, was investigated by differential scanning calorimetry (DSC) and X-ray photoelectron spectroscopy (XPS). The flame retardance and burning behavior of DETA-APP cured EP were also evaluated. The limiting oxygen index (LOI) value of DETA-APP/EP was enhanced to 30.5% with only 15 wt % of DETA-APP incorporated; and the UL-94 V-0 rating could be easily passed through with only 10 wt % of the hybrid. Compared with DETA/EP, the peak-heat release rate (PHRR), total heat release (THR), total smoke production (TSP), and peak-smoke production release (SPR) of DETA-APP/EP (15 wt % addition), obtained from cone calorimetry, were dropped by 68.3, 79.3, 79.0, and 30.0%, respectively, suggesting excellent flame-retardant and smoke suppression efficiency. The flame-retardant mechanism of DETA-APP/EP has been investigated comprehensively. The results of all the aforementioned studies distinctly confirmed that DETA-APP was an effective flame-retardant curing agent for EP.

  19. Piezoelectric scattering limited mobility of hybrid organic-inorganic perovskites CH3NH3PbI3

    NASA Astrophysics Data System (ADS)

    Lu, Ying-Bo; Kong, Xianghua; Chen, Xiaobin; Cooke, David G.; Guo, Hong

    2017-02-01

    Carrier mobility is one of the most important parameters for semiconducting materials and their use in optoelectronic devices. Here we report a systematic first principles analysis of the acoustic phonon scattering mechanism that limits the mobility of CH3NH3PbI3 (MAPbI3) perovskites. Due to the unique hybrid organic-inorganic structure, the mechanical, electronic and transport properties are dominated by the same factor, i.e. the weak interatomic bond and the easy rotation of methylammonium (MA) molecules under strain. Both factors make MAPbI3 soft. Rotation of MA molecule induces a transverse shift between Pb and I atoms, resulting in a very low deformation potential and a strong piezoelectricity in MAPbI3. Hence the carrier mobility of pristine MAPbI3 is limited by the piezoelectric scattering, which is consistent to the form of its temperature dependence. Our calculations suggest that in the pristine limit, a high mobility of about several thousand cm2 V‑1 S‑1 is expected for MAPbI3.

  20. A Simple Approach for Molecular Controlled Release based on Atomic Layer Deposition Hybridized Organic-Inorganic Layers

    PubMed Central

    Boehler, Christian; Güder, Firat; Kücükbayrak, Umut M.; Zacharias, Margit; Asplund, Maria

    2016-01-01

    On-demand release of bioactive substances with high spatial and temporal control offers ground-breaking possibilities in the field of life sciences. However, available strategies for developing such release systems lack the possibility of combining efficient control over release with adequate storage capability in a reasonably compact system. In this study we present a new approach to target this deficiency by the introduction of a hybrid material. This organic-inorganic material was fabricated by atomic layer deposition of ZnO into thin films of polyethylene glycol, forming the carrier matrix for the substance to be released. Sub-surface growth mechanisms during this process converted the liquid polymer into a solid, yet water-soluble, phase. This layer permits extended storage for various substances within a single film of only a few micrometers in thickness, and hence demands minimal space and complexity. Improved control over release of the model substance Fluorescein was achieved by coating the hybrid material with a conducting polymer film. Single dosage and repetitive dispensing from this system was demonstrated. Release was controlled by applying a bias potential of ±0.5 V to the polymer film enabling or respectively suppressing the expulsion of the model drug. In vitro tests showed excellent biocompatibility of the presented system. PMID:26791399