Telecommuters: the work force of the future.

PubMed

Yancer, D A; Moe, J K

1995-01-01

Telecommuters are the work force of the future. The dawning of the information age, with its explosion of telecommunication technology, presents new opportunities for healthcare agencies to extend their borders far beyond traditional physical boundaries. The virtual workplace can become a reality and position healthcare agencies to be geographically dispersed throughout their community. The authors describe a pioneering effort to use telecommunications to retain a valuable employee and create a healthcare agency's first virtual workplace. Strategies for success in telecommuting also are provided from both the telecommuter's and the manager's viewpoints.

Tech Prep II: Implementation Final Report.

ERIC Educational Resources Information Center

Brown, Jane A.

This document contains the final progress report on a tech prep implementation project and the Work Force Challenge 2000 Report developed during the project. The final report lists these major accomplishments: approximately 1,500 educators in grades K-12 were provided information concerning future global issues in the work force and the effects in…

Women, Work and the Future. Workforce 2000.

ERIC Educational Resources Information Center

Watson, Jennifer

The first section of this fact sheet reports that: from 1989 through the year 2000, two out of three new entrants into the work force will be women; in 1988, two-thirds of all women with children under 18 were in the work force; nearly 90 percent of jobs created between now and 2000 will be in the service sector; and part-time or temporary…

The Future of Work: Some Prospects and Perspectives. A Compilation.

ERIC Educational Resources Information Center

Cho, DaeYeon; Imel, Susan

The question of what the future of work in the United States will be is examined in this publication using current information on trends and issues related to work, the economy, and the labor force. The compilation intended to give an overview of selected aspects of the topic and provide information about other resources. In the first section,…

Jobs for the Future. An AFL-CIO View. Publication Number 179.

ERIC Educational Resources Information Center

Donahue, Thomas R.

The employment crisis will not be caused by a less male, less white, and less English-speaking labor force. The future employment crisis will be, as always, on the supply side of the labor market. The number of new jobs does not match the number of people entering the work force. Jobs have been lost in manufacturing, while jobs in services have…

Dental work force strategies during a period of change and uncertainty.

PubMed

Brown, L J

2001-12-01

Both supply and demand influence the ability of the dental work force to adequately and efficiently provide dental care to a U.S. population growing in size and diversity. Major changes are occurring on both sides of the dental care market. Among factors shaping the demand for dental care are changing disease patterns, shifting population demographics, the extent and features of third-party payment, and growth of the economy and the population. The capacity of the dental work force to provide care is influenced by enhancements of productivity and numbers of dental health personnel, as well as their demographic and practice characteristics. The full impact of these changes is difficult to predict. The dentist-to-population ratio does not reflect all the factors that must be considered to develop an effective dental work force policy. Nationally, the dental work force is likely to be adequate for the next several years, but regional work force imbalances appear to exist and may get worse. Against this backdrop of change and uncertainty, future dental work force strategies should strive for short-term responsiveness while avoiding long-term inflexibility. Trends in the work force must be continually monitored. Thorough analysis is required, and action should be taken when necessary.

The 21st Century at Work: Forces Shaping the Future Workforce and Workplace in the United States. Summary

ERIC Educational Resources Information Center

Karoly, Lynn A.; Panis, Constantijn W. A.

2004-01-01

What are the forces that will continue to shape the U.S. workforce and workplace over the next 10 to 15 years? With such inevitabilities as the proliferation and acceleration of technology worldwide, will more individuals work at home, will more businesses outsource their noncore functions -- and with what consequences? Answering such questions…

The 21st Century at Work: Forces Shaping the Future Workforce and Workplace in the United States

ERIC Educational Resources Information Center

Karoly, Lynn A.; Panis, Constantijn W. A.

2004-01-01

What are the forces that will continue to shape the U.S. workforce and workplace over the next 10 to 15 years? With such inevitabilities as the proliferation and acceleration of technology worldwide, will more individuals work at home, will more businesses outsource their noncore functions -- and with what consequences? Answering such questions…

Assessing differences in hours worked between male and female dentists: an analysis of cross-sectional national survey data from 1979 through 1999.

PubMed

Walton, Surrey M; Byck, Gayle R; Cooksey, Judith A; Kaste, Linda M

2004-05-01

Women are increasingly entering the dental work force. This study examines the impact of sex, age and other demographic characteristics on dentists' work force participation and on hours worked from 1979 through 1999. The study drew on cross-sectional data on dentists (4,209 men and 354 women) from national population surveys conducted by the U.S. Bureau of Labor Statistics from 1979 through 1999. The authors used descriptive statistics and regression analyses to examine sex differences in work force participation and in hours worked across age, as well as other factors. Work force participation was high for both men and women. Men worked more hours and worked part time less frequently; they worked more than 42 hours per week more frequently. Older dentists worked fewer hours, with a larger impact of age seen among men. Having children had a significantly greater effect on the number of hours worked per week among female dentists than among male dentists. There were significant differences in dentists' hours worked by sex and by age. The consistency of the results with past studies suggests these differences will hold in the near future. Women's entry into the dental work force has been significant and has helped maintain the supply of dentists. Sex differences in the work force should be considered in evaluating the supply of dentists and related work force policy.

Jobs: Ohio's Future. Creating a High Performance Workforce for Ohio. A Comprehensive Workforce Development Strategy Developed by the Governor's Human Resources Advisory Council. Revised.

ERIC Educational Resources Information Center

Ohio State Bureau of Employment Services, Columbus.

For a competitive advantage, Ohio must be sensitive to three national trends that will reshape its work force: the growing gap between the skill requirements of jobs and workers' capabilities, the slow growth of the labor force, and demands of a global economy. The future competitiveness of Ohio's economy will depend on its capacity to support the…

Arranged Marriages: Relationships Between Regular and Irregular Forces, During the Early American Revolutionary War in Monmouth County, New Jersey

DTIC Science & Technology

2013-12-10

like an arranged marriage, regular and irregular forces can make the best of the situation and make it work , or hold onto preconceived notions and let...ultimately failed. In contrast, the rebels found a way to make the arrangement work . This monograph begins with a discussion of irregular units as a...it concludes with a few insights to consider when approaching future relationships. The difficulty and necessity of building positive working

United States Air Force Posture Statement 2004

DTIC Science & Technology

2004-05-24

warfighting effort from planning to execution. Air, ground, maritime, and space forces worked together at the same time for the same objectives, not merely...nation, the growing nexus of radicalism and technology. As we continue our work in Afghanistan and Iraq, we stand ready to respond to flashpoints...their potential application in future threats, the mere maintenance of our aging aircraft and space systems will not suffice. Simply stated, our

Public Service through the State Government Workforce: Meeting the Challenge of Change. Executive Summary.

ERIC Educational Resources Information Center

State Univ. of New York, Albany. Nelson A. Rockefeller Inst. of Government.

This report summarizes the findings of a New York State task force that studied the public work force of the state with a focus on preparing these workers for the future. Discussion of the task force was organized along four major topics of concern: recruiting, retention, and compensation; management style; education, training, and retraining; and…

Educating for the Future.

ERIC Educational Resources Information Center

Carlisle, E. R.

1988-01-01

Recent economic data suggest that trends occurring in the U.S. and other global economies will force even greater changes upon our educational system. To help educators prepare students for tomorrow's work force, this article discusses and clarifies some current developments in technology, job and education requirements, and U.S. productivity…

Work in America: The Decade Ahead. Work in America Institute Series.

ERIC Educational Resources Information Center

Kerr, Clark, Ed.; Rosow, Jerome M., Ed.

The results of three national symposia held in New York, Chicago, and San Francisco by the Work in America Institute involving more than 300 leaders from industry, qovernment, labor, communications, and education are summarized in this volume dealing with the work force of the future and the emerging work environment. Changes reported that affect…

The Mechanization of Work.

ERIC Educational Resources Information Center

Ginzberg, Eli

1982-01-01

Discusses how mechanization of work has been treated by economists, what its effect has been on the past U.S. economy, and what its future effect is likely to be. Emphasizes the impact of mechanization on the shifting structure and character of the labor force and evolution of the work environment. (Author/JN)

Telecommuters: The Stay-at-home Work Force of the Future.

ERIC Educational Resources Information Center

Eder, Peter F.

1983-01-01

Much of the work in the coming information society will be done by teleworkers who stay home and "commute" to work via telecommunications. Technological problems, societal barriers, and marketing problems--three issues which determine growth and spread of teleworking--are discussed. A scenario for teleworking is described. (NW)

Acquainting Future Office Employees with Productivity-Improvement Techniques.

ERIC Educational Resources Information Center

Quible, Zane K.

1982-01-01

Examines factors affecting productivity (government regulations, energy costs, decline in the work ethic, capital investment, number of service workers, work force characteristics, management practices, and unions), and techniques to improve productivity (employee involvement, job structure, communication, flexitime, employee upgrading, incentive…

Psychosocial Working Conditions and Cognitive Complaints among Swedish Employees

PubMed Central

Stenfors, Cecilia U. D.; Magnusson Hanson, Linda; Oxenstierna, Gabriel; Theorell, Töres; Nilsson, Lars-Göran

2013-01-01

Background Cognitive complaints involving problems with concentration, memory, decision-making and thinking are relatively common in the work force. The sensitivity of both subjective and objective cognitive functioning to common psychiatric conditions, stress levels and to cognitive load makes it plausible that psychosocial working conditions play a role in cognitive complaints. Thus, this study aimed to test the associations between psychosocial work factors and cognitive complaints in nationally representative samples of the Swedish work force. Cross-sectional (n = 9751) and prospective (n = 3644; two time points two years apart) sequential multiple regression analyses were run, adjusting for general confounders, depressive- and sleeping problems. Additional prospective analyses were run adjusting for baseline cognitive complaints. Cross-sectional results High quantitative demands, information and communication technology (ICT) demands, underqualification and conflicts were positively associated with cognitive complaints, while social support, good resources at work and overqualification were negatively associated with cognitive complaints in all models. Skill discretion and decision authority were weakly associated with cognitive complaints. Conflicts were more strongly associated with cognitive complaints in women than in men, after adjustment for general confounders. Prospective results Quantitative job demands, ICT demands and underqualification were positively associated with future cognitive complaints in all models, including when adjusted for baseline cognitive complaints. Decision authority was weakly positively associated with future cognitive complaints, only after adjustment for depressive- and sleeping problems respectively. Social support was negatively associated with future cognitive complaints after adjustment for general confounders and baseline cognitive complaints. Skill discretion and resources were negatively associated with future cognitive complaints after adjustment for general confounders. The associations between quantitative demands and future cognitive complaints were stronger in women. Discussion/Conclusions The findings indicate that psychosocial working conditions should be taken into account when considering cognitive complaints among employees. PMID:23560101

Future Changes: Implications for Arizona's Universities.

ERIC Educational Resources Information Center

Caldwell, Roger L.

One of the working papers in the final report of the Arizona Board of Regents' Task Force on Excellence, Efficiency and Competitiveness, this document focuses (in Part I) on the summary, conclusions, and recommendations of future changes and their relationship to the Arizona Universities; and, (in Part II) provides background materials for…

QDR Analysis: Lessons Learned and Future Directions Mini- Symposium

DTIC Science & Technology

1999-07-02

Bob Sheldon, Mr. Ted Smyth, COL BJ. Thornburg, LTC Mark Youngren, Mr. Clayton Thomas , FS and Dr. Jerry Kotchka. 23 OVERVIEW * Working Group Insights...DAG, "Air Force QDR Analysis" "* CAPT T. J. Gregory, The Joint Staff, J8, "The Baseline Engagement Force Study" Working Group 6, Littoral Warfare...FAX: (703)-751-8171 Email: None Email: morsvpa@aol.com COL Thomas L. Allen MAJ Steven M Aviles AFSAA/CC US Army Concepts Analysis Agency 1570 Air

Family medical leave. An employee benefit for working caregivers of elderly family members.

PubMed

Carruth, A K; Booth, D

1991-09-01

Future trends include a decrease in the number of adult children, an increase in the number of individuals over age 65, single parent families, working women, and individuals with no health care insurance. As more women with multiple roles and responsibilities enter and continue as part of the work force, employers recognize the need for support of family issues. Currently many employers lack initiative to make these needed changes. The occupational health nurses' role in relation to future policy for working caregivers includes assessment of how employment and caregiving impact work performance, job satisfaction, and health; and participation in defining public policy issues.

Perspectives on the '90s. Outlook Report.

ERIC Educational Resources Information Center

Sadowske, P. Sue, Ed.; Adrian, Judith G., Ed.

This report on forces influencing the future is designed to define the challenges that lie ahead and to help individuals develop plans to meet these challenges. It is based on the work of a team of "environmental scanners" who reviewed media, books, and academic research and discussed current issues with a variety of people to explore forces at…

Future Skill Needs in Europe: Critical Labour Force Trends. Cedefop Research Paper. No 59

ERIC Educational Resources Information Center

Cedefop - European Centre for the Development of Vocational Training, 2016

2016-01-01

The European labour market is challenged by changes in the demographic composition of the labour force and increasing work complexities and processes. Skills forecasting makes useful contribution to decisions by policy-makers, experts and individuals. In this publication, Cedefop presents the latest results of skills supply and demand forecasts.…

Toward a New Definition of Employability. Report by the North Central Indiana Workforce Literacy Task Force.

ERIC Educational Resources Information Center

Center for Remediation Design, Washington, DC.

The North Central Indiana Workplace Literacy Initiative seeks to develop a curriculum management system addressing work force literacy needs and a coordinated human resource investment system meeting individual economic self-sufficiency needs and labor market needs. The workplace of the future will contain six key changes: employers will require…

Roles and challenges of the health information management educator: a national HIM faculty survey.

PubMed

Houser, Shannon H; Tesch, Linde; Hart-Hester, Susan; Dixon-Lee, Claire

2009-01-01

Health information technology initiatives created the framework for a national health information infrastructure that concomitantly fostered a need to build intellectual capacity within our current and future health information management (HIM) work force. Results from the 2008 HIM Educator Survey are discussed. Developed for voluntary electronic participation, the survey comprised a series of questions about educators' professional interests and responsibilities. Summary data from the 402 respondents are provided and highlight areas such as academic rank, teaching status, salary range, levels of interest in various issues, and use of virtual learning tools. Data from this survey provide insights into the concerns and challenges many HIM educators face in today's training institutions and suggest implications for future directions in work force training and professional development within the HIM field.

Report on Wisconsin Quality of Workforce Initiatives.

ERIC Educational Resources Information Center

Technical Education: Pathway to the Future, 1991

1991-01-01

This newsletter updates the reader on the latest Wisconsin initiatives to build tomorrow's work force through education, training, and cooperative ventures with business and industry. "Executive Cabinet for a Quality Workforce Defines Pathways to the Future" (Dwight York) discusses major reports related to the work of the executive…

Worklife expectancies of fixed-term Finnish employees in 1997-2006.

PubMed

Nurminen, Markku

2008-04-01

Fixed-term employment is prevalent in the Finnish labor force. This form of employment contract is marked by fragmentary work periods, demands for flexibility in workhours, and concern for multiple insecurities. A nonpermanent employee may also incur adverse health consequences. Yet there exist no exact statistics on the duration of fixed-term employment. This paper estimated the future duration of the time that a Finn is expected to be engaged in irregular work. Multistate regression modeling and stochastic analysis were applied to aggregated data from surveys conducted among the labor force by Statistics Finland in 1997-2006. In 2006, a Finnish male was expected to work a total of 3.8 years in fixed-term employment, combined over consecutive or separate time spans; this time amounts to 8% of his remaining work career from entry into the work force until final retirement. For a woman the expectancy was greater, 6.5 years or 13%. For the age interval 20-29 years, the total was 16% for men and 23% for women. The type and duration of employment is influenced by security factors and economic cycles, both of which affect men and women differently. Over the past decade, fixed-term employment increased consistently in the female labor contingent, and it was more pronounced during economic slowdowns. This labor market development calls for standards for flexibility and guarantees for security in the fragmented future worklives of fixed-term employees.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rich, B.L.

Measurements of beta and/or nonpenetrating exposure results is complicated and past techniques and capabilities have resulted in significant inaccuracies in recorded results. Current developments have resulted in increased capabilities which make the results more accurate and should result in less total exposure to the work force. Continued development of works in progress should provide equivalent future improvements.

Social Work Continuing Education: Current Issues and Future Direction

ERIC Educational Resources Information Center

Kurzman, Paul A.

2016-01-01

Continuing education is arising as an area of rapid growth and increased attention in the social work profession. Conceptually, the impetus and focus are on the promotion of the principles of lifelong learning and professional replenishment; but pragmatically, the driving force has been the virtually universal requirement of continuing education…

Work and retirement among a cohort of older men in the United States, 1966-1983.

PubMed

Hayward, M D; Grady, W R

1990-08-01

Multivariate increment-decrement working life tables are estimated for a cohort of older men in the United States for the period 1966-1983. The approach taken allows multiple processes to be simultaneously incorporated into a single model, resulting in a more realistic portrayal of a cohort's late-life labor force behavior. In addition, because the life table model is developed from multivariate hazard equations, we identify the effects of sociodemographic characteristics on the potentially complex process by which the labor force career is ended. In contrast to the assumed homogeneity of previous working life table analyses, the present study shows marked differences in labor force mobility and working and nonworking life expectancy according to occupation, class of worker, education, race, and marital status. We briefly discuss the implications of these findings for inequities of access to retirement, private and public pension consumption, and future changes in the retirement process.

WORKING AND CARING: THE SIMULTANEOUS DECISION OF LABOR FORCE PARTICIPATION AND INFORMAL ELDERLY AND CHILD SUPPORT ACT IVITIES IN MEXICO*

PubMed Central

van Gameren, Edwin; Velandia Naranjo, Durfari

2016-01-01

We analyze factors determining women’s decisions to participate in the labor market and provide elderly care and nonfinancial support to their (grand)children. We use data from the Mexican Health and Aging Study, a survey of people aged 50 and over, applying a three-equation, reduced-form SUR model. Results suggest that care needs are the driving force behind caregiving activities. Traditional roles also appear to be relevant in the labor force participation decision: women with a closer labor market connection when they were young are more likely to work. Simulations of demographic changes illustrate potential effects for future caregiving and participation rates. PMID:26924883

Innovations in Practice: An Examination of Technological Impacts in the Field

ERIC Educational Resources Information Center

Angus, Jim

2012-01-01

Technological innovation is sweeping the world into an unimaginable future. These forces are affecting all aspects of how people live and work. What will be the role of museums and museum educators in this future? This article surveys some of the technologies that have profoundly affected museums and museum education and poses some questions: what…

Professional Motivation Formation of Future Specialists under the Conditions of Regional Educational Complex

ERIC Educational Resources Information Center

Kargina, Elena Mikhaylovna

2015-01-01

Motivation plays the leading role in the organization of the personality structure. It is a driving force of the activity. Motivation accounts for the behavior and activity and has a great impact on professional self-determination and person's satisfaction with the work. The problem of professional motivation formation of a future specialist is…

The Work Ability of Hong Kong Construction Workers in Relation to Individual and Work-Related Factors.

PubMed

Ng, Jacky Y K; Chan, Alan H S

2018-05-14

The shortage in Hong Kong of construction workers is expected to worsen in future due to the aging population and increasing construction activity. Construction work is dangerous and to help reduce the premature loss of construction workers due to work-related disabilities, this study measured the work ability of 420 Hong Kong construction workers with a Work Ability Index (WAI) which can be used to predict present and future work performance. Given the importance of WAI, in this study the effects of individual and work-related factors on WAI were examined to develop and validate a WAI model to predict how individual and work-related factors affect work ability. The findings will be useful for formulating a pragmatic intervention program to improve the work ability of construction workers and keep them in the work force.

Reading for Learning: Literacy Supports for 21st-Century Work

ERIC Educational Resources Information Center

Gomez, Louis M.; Gomez, Kimberley

2007-01-01

The U.S. work force is changing. Professional and related occupations and service occupations will be the fastest-growing sectors for the foreseeable future. Both demand strong communication skills for sharing complex ideas across diverse communities. In addition, the 21st-century economy will require its members to think creatively and critically…

Faces and Future of the Nonmetro Workforce.

ERIC Educational Resources Information Center

Swanson, Linda L.; Butler, Margaret A.

Due largely to outmigration of young people, the nonmetropolitan United States has a lower proportion of people in the prime working ages of 20-44 than do metropolitan areas. Discouraged workers and high levels of work-preventing disabilities have contributed to lower rates of nonmetropolitan labor force participation for each age group between 20…

Working for America. Career Schools: A Tremendous Resource for Employers.

ERIC Educational Resources Information Center

Career Education, 1992

1992-01-01

Discusses industries that are vital to the nation's economy and the numbers of skilled workers they will need to keep moving ahead. Industries profiled are aviation, automotive, allied health, trucking, paralegal, electronics, and computer-aided drafting. Also looks at proprietary schools that are educating the work force of the future. (JOW)

Young Adult Couples Transitioning to Work: The Intersection of Career and Relationship

ERIC Educational Resources Information Center

Domene, Jose F.; Nee, Jessica J.; Cavanaugh, Ashley K.; McLelland, Serita; Stewart, Becky; Stephenson, Michelle; Kauffman, Bradley; Tse, Christopher K.; Young, Richard A.

2012-01-01

Contextual action theory was used to frame an exploratory qualitative study of young adult couples' experiences of transitioning from post-secondary education into the labor force, addressing the specific research question ''What kinds of projects for future work and life together do young adult couples jointly construct and pursue as they…

Why and Whither Hypersonics Research in the US Air Force

DTIC Science & Technology

2000-12-01

of strong interest in high supersonic and hypersonic flight. Actual flight achievements—notably the first supersonic flight by the XS - 1 on 14...Air Force is sponsoring Future Strike Aircraft studies with Boeing, Lockheed Martin, and Northrop Grumman . Under these studies, subsonic, supersonic...SMC/XRD) MSE Technology Applications, Inc. Northrop Grumman Air Combat Systems Orbital Sciences Corporation Boeing Phantom Works 18 May 2000

A biomechanical assessment of isometric handgrip force and fatigue at different anatomical positions.

PubMed

Alkurdi, Ziad D; Dweiri, Yazan M

2010-05-01

The present work examined the handgrip force at different anatomical positions for both hands. Anthropometrics, handgrip force, and fatigue were obtained from a representative sample of 20 males randomly selected from the German Jordanian University students. The hand dynamometer first was calibrated with respect to the volunteer's maximal grip strength, and he was then asked to squeeze maximally until the grip force decreased to 50% of its maximal due to fatigue; this test was performed for both hands at different anatomical positions with 2 min of rest for recovery of muscle function. The results showed differences in the handgrip force between subjects of the same anatomical positions and for the different anatomical positions, differences in the time for 50% of the force maximal for both right hand and left hand, higher time required to achieve 50% of maximal handgrip force for the nondominant hand, and maximal handgrip force was obtained when arm adduction with 90 degrees forward at the elbow joint. Recommendations for future work are to measure fatigue time at different percentages, 25%, 50%, 60%, and 75% of maximal force and to investigate the factors affecting handgrip force over a larger sample.

Shaping Graduate Education's Future: Implications of Demographic Shifts for the 21st Century.

ERIC Educational Resources Information Center

Brazziel, William F.

Due to demographic changes and trends now in progress graduate education delivery systems for students, teachers, and support providers will all be different in the future. Demographics will be the engine of change and the change itself will come rapidly as countries take steps to maintain and expand competitive skills in their work forces. There…

InDemand: Careers in Science, Technology, Engineering, and Math. Issue 5

ERIC Educational Resources Information Center

Career Voyages, 2006

2006-01-01

The gateway to a successful future is not so much knowing your intended career path today but in keeping an open and curious mind about the information you are learning now in your classes and how it relates to potential career opportunities for the future--whether entering the work force after high school, college or advanced studies. This issue…

Stakeholder Views on Attributes of Scientific Literacy Important for Future Citizens and Employees--A Delphi Study

ERIC Educational Resources Information Center

Post, Aveliis; Rannikmae, Miia; Holbrook, Jack

2011-01-01

This study is based on the creation of a theoretical tool for determining competencies and knowledge in science education which stakeholders value as necessary for students to become productive members of the future work force as well as responsible citizens. Stakeholders' opinions (N = 85) were gathered from persons in different walks of life by…

Owning the program technical baseline for future space systems acquisition: program technical baseline tracking tool

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.; Hant, James J.; Kizer, Justin R.; Min, Inki A.; Siedlak, Dennis J. L.; Yoh, James

2017-05-01

The U.S. Air Force (USAF) has recognized the needs for owning the program and technical knowledge within the Air Force concerning the systems being acquired to ensure success. This paper extends the previous work done by the authors [1-2] on the "Resilient Program Technical Baseline Framework for Future Space Systems" and "Portfolio Decision Support Tool (PDST)" to the development and implementation of the Program and Technical Baseline (PTB) Tracking Tool (PTBTL) for the DOD acquisition life cycle. The paper describes the "simplified" PTB tracking model with a focus on the preaward phases and discusses how to implement this model in PDST.

The Work Ability of Hong Kong Construction Workers in Relation to Individual and Work-Related Factors

PubMed Central

Ng, Jacky Y. K.

2018-01-01

The shortage in Hong Kong of construction workers is expected to worsen in future due to the aging population and increasing construction activity. Construction work is dangerous and to help reduce the premature loss of construction workers due to work-related disabilities, this study measured the work ability of 420 Hong Kong construction workers with a Work Ability Index (WAI) which can be used to predict present and future work performance. Given the importance of WAI, in this study the effects of individual and work-related factors on WAI were examined to develop and validate a WAI model to predict how individual and work-related factors affect work ability. The findings will be useful for formulating a pragmatic intervention program to improve the work ability of construction workers and keep them in the work force. PMID:29758018

What is the prevalence of and associations with forced labour experiences among male migrants from Dolakha, Nepal? Findings from a cross-sectional study of returnee migrants

PubMed Central

Mak, Joelle; Abramsky, Tanya; Sijapati, Bandita; Kiss, Ligia; Zimmerman, Cathy

2017-01-01

Objectives Growing numbers of people are migrating outside their country for work, and many experience precarious conditions, which have been linked to poor physical and mental health. While international dialogue on human trafficking, forced labour and slavery increases, prevalence data of such experiences remain limited. Methods Men from Dolakha, Nepal, who had ever migrated outside of Nepal for work were interviewed on their experiences, from predeparture to return (n=194). Forced labour was assessed among those who returned within the past 10 years (n=140) using the International Labour Organization's forced labour dimensions: (1) unfree recruitment; (2) work and life under duress; and (3) impossibility to leave employer. Forced labour is positive if any one of the dimensions is positive. Results Participants had worked in India (34%), Malaysia (34%) and the Gulf Cooperation Council countries (29%), working in factories (29%), as labourers/porters (15%) or in skilled employment (12%). Among more recent returnees (n=140), 44% experienced unfree recruitment, 71% work and life under duress and 14% impossibility to leave employer. Overall, 73% experienced forced labour during their most recent labour migration. Forced labour was more prevalent among those who had taken loans for their migration (PR 1.23) and slightly less prevalent among those who had migrated more than once (PR 0.87); however the proportion of those who experienced forced labour was still high (67%). Age, destination and duration of stay were associated with only certain dimensions of forced labour. Conclusion Forced labour experiences were common during recruitment and at destination. Migrant workers need better advice on assessing agencies and brokers, and on accessing services at destinations. As labour migration from Nepal is not likely to reduce in the near future, interventions and policies at both source and destinations need to better address the challenges migrants face so they can achieve safer outcomes. PMID:28801409

Race for resources: continuing struggles over minerals and fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanzer, M.

1980-01-01

Analyzing the mineral crisis within the historical context of the workings of the international capitalist system is necessary since capitalism spawned the industrial revolution, which in turn led to the vast expansion of mineral use. The analysis begins with the multinational companies that dominate the international mineral industry because they are generally the leading forces in the struggle for control of mineral resources and profits. The focus is twofold: (1) on those minerals that are important as economic inputs and in money value, including the metals copper, bauxite, nickel, and iron ore; and (2) to a lesser extent, on themore » fuels. The emphasis is on the current picture and likely changes in the future. Case studies illustrate some of the major forces at work. Crucial problem areas of the future will include the roles of technology, the Third World, and socialist countries. 26 references, 24 tables.« less

The Role of the School District toward Preparing Students for the 21st Century

ERIC Educational Resources Information Center

Aguilar-Torres, Gloria

2010-01-01

This dissertation reflects the outcomes of a small school district that is successfully incorporating 21st century skills with the demands set forth by our current educational policy, No Child Left Behind. Considerations regarding globalization, future work force and work skills, definition of 21st century skills, supporting 21st century skills in…

The risk/safety assessment of transgenic crops: the transportability of data.

PubMed

Kearns, Peter; Dagallier, Bertrand; Suwabe, Kazuyuki

2014-12-01

This paper presents the activities and publications of Organisation for Economic Co-operation and Developments (OECD's) Working Group on Harmonisation of Regulatory Oversight in Biotechnology and the Task Force for the Safety of Novel Foods and Feeds. The main outputs of the work are the Series of "consensus documents" of the respective groups. These documents compile information which is intended to be used by those involved in the business of risk/safety assessment. These documents are one means of ensuring the transportability of data amongst authorities. An increasing trend in both the Working Group and Task Force is to consider crop species which are relevant to tropical regions and therefore to countries that are not necessarily members of the OECD. For example, the Working Group has recently published a consensus document on bananas and plantains while the Task Force has published a document on cassava. This trend towards crops of greater interest in the tropics is likely to continue into the future.

Early Claiming of Social Security Benefits and Labor Supply Behavior of Older Americans.

PubMed

Benítez-Silva, Hugo; Heiland, Frank

2008-12-01

The labor supply incentives provided by the early retirement rules of the United States Social Security Old Age benefits program are of growing importance as the Normal Retirement Age (NRA) increases to 67, and the labor force participation of Older Americans starts to increase. These incentives allow individuals who claim benefits before the NRA but continue to work, or return to the labor force, to increase their future rate of benefit pay by having benefits withheld. Since the adjustment of the benefit rate takes place only after the NRA is reached, benefits received before the NRA can become actuarially unfair for those who continue to work after claiming. Consistent with these incentives, estimates from bivariate models of the monthly labor force exit and claiming hazards using data from the Health and Retirement Study indicate that early claimers who do not withdraw from the labor force around the time they claim are increasingly likely to stay in the labor force.

Early Claiming of Social Security Benefits and Labor Supply Behavior of Older Americans†

PubMed Central

Benítez-Silva, Hugo; Heiland, Frank

2010-01-01

The labor supply incentives provided by the early retirement rules of the United States Social Security Old Age benefits program are of growing importance as the Normal Retirement Age (NRA) increases to 67, and the labor force participation of Older Americans starts to increase. These incentives allow individuals who claim benefits before the NRA but continue to work, or return to the labor force, to increase their future rate of benefit pay by having benefits withheld. Since the adjustment of the benefit rate takes place only after the NRA is reached, benefits received before the NRA can become actuarially unfair for those who continue to work after claiming. Consistent with these incentives, estimates from bivariate models of the monthly labor force exit and claiming hazards using data from the Health and Retirement Study indicate that early claimers who do not withdraw from the labor force around the time they claim are increasingly likely to stay in the labor force. PMID:20811509

Validating Future Force Performance Measures (Army Class): Concluding Analyses

DTIC Science & Technology

2016-06-01

32 Table 3.10. Descriptive Statistics and Intercorrelations for LV Final Predictor Factor Scores...55 Table 4.7. Descriptive Statistics for Analysis Criteria...Soldier attrition and performance: Dependability (Non- Delinquency ), Adjustment, Physical Conditioning, Leadership, Work Orientation, and Agreeableness

Sea level rise from the Greenland Ice Sheet during the Eemian interglacial: Review of previous work with focus on the surface mass balance

NASA Astrophysics Data System (ADS)

Plach, Andreas; Hestnes Nisancioglu, Kerim

2016-04-01

The contribution from the Greenland Ice Sheet (GIS) to the global sea level rise during the Eemian interglacial (about 125,000 year ago) was the focus of many studies in the past. A main reason for the interest in this period is the considerable warmer climate during the Eemian which is often seen as an equivalent for possible future climate conditions. Simulated sea level rise during the Eemian can therefore be used to better understand a possible future sea level rise. The most recent assessment report of the Intergovernmental Panel on Climate Change (IPCC AR5) gives an overview of several studies and discusses the possible implications for a future sea level rise. The report also reveals the big differences between these studies in terms of simulated GIS extent and corresponding sea level rise. The present study gives a more exhaustive review of previous work discussing sea level rise from the GIS during the Eemian interglacial. The smallest extents of the GIS simulated by various authors are shown and summarized. A focus is thereby given to the methods used to calculate the surface mass balance. A hypothesis of the present work is that the varying results of the previous studies can largely be explained due to the various methods used to calculate the surface mass balance. In addition, as a first step for future work, the surface mass balance of the GIS for a proxy-data derived forcing ("index method") and a direct forcing with a General Circulation Model (GCM) are shown and discussed.

Biospheric feedback effects in a synchronously coupled model of human and Earth systems

NASA Astrophysics Data System (ADS)

Thornton, P. E.; Calvin, K. V.; Jones, A. D.; Di Vittorio, A. V.; Bond-Lamberty, B. P.; Chini, L. P.; Shi, X.; Mao, J.; Collins, W. D.; Edmonds, J.; Hurtt, G. C.

2017-12-01

Fossil fuel combustion and land-use change are the two largest contributors to industrial-era increases in atmospheric CO2 concentration. Projections of these are thus fundamental inputs for coupled Earth system models (ESMs) used to estimate the physical and biological consequences of future climate system forcing. While historical datasets are available to inform past and current climate analyses, assessments of future climate change have relied on projections of energy and land use from energy economic models, constrained by assumptions about future policy, land-use patterns, and socio-economic development trajectories. In this work we show that the climatic impacts on land ecosystems drives significant feedbacks in energy, agriculture, land-use, and carbon cycle projections for the 21st century. We find that exposure of human appropriated land ecosystem productivity to biospheric change results in reductions of land area used for crops; increases in managed forest area and carbon stocks; decreases in global crop prices; and reduction in fossil fuel emissions for a low-mid range forcing scenario. Land ecosystem response to increased carbon dioxide concentration, increased anthropogenic nitrogen deposition, and changes in temperature and precipitation all play a role. The feedbacks between climate-induced biospheric change and human system forcings to the climate system demonstrated in this work are handled inconsistently, or excluded altogether, in the one-way asynchronous coupling of energy economic models to ESMs used to date.

Future United States Role in European Security

DTIC Science & Technology

1992-08-26

MONITORING ORGANIZATION REPORT NUMBER(S) 6a. NAME OF PERFORMING ORGANIZATION 6b. OFFICE SYMBOL 7a. NAME OF MONITORING ORGANIZATION US Army War College (if...necessary and identify by block number) FIELD GROUP SUB- GROUP 19, ABSTRACT (Continue on reverse if necessary and identify by block number) See reverse...concerning these forces: Of course, they used NATO rules of engagement and worked to NATO standards. They had trained together as NATO forces and

High Seas Buffer: The Taiwan Patrol Force, 1950-1979

DTIC Science & Technology

2012-04-01

NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval War College...Center for Naval Warfare Studies,686 Cushing Road,Newport,RI,02841 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND...forces performing their lawful functions in that area. He declared, “The determination of the future status of Formosa must await the restoration

Acoustic sensors on small robots for the urban environment

NASA Astrophysics Data System (ADS)

Young, Stuart H.; Scanlon, Michael V.

2005-05-01

As the Army transforms to the Future Force, particular attention must be paid to operations in Complex and Urban Terrain. Because our adversaries realize that we don't have battlefield dominance in the urban environment, and because population growth and migration to urban environments is still on the increase, our adversaries will continue to draw us into operations in the urban environment. The Army Research Laboratory (ARL) is developing technology to equip our soldiers for the urban operations of the future. Sophisticated small robotic platforms with diverse sensor suites will be an integral part of the Future Force, and must be able to collaborate not only amongst themselves but also with their manned partners. The use of acoustic sensors on robotic platforms, as shown in this paper, will greatly aid the soldiers of the future force in performing numerous types of missions including Reconnaissance, Surveillance, and Target Acquisition (RSTA) by providing situational awareness, particularly to the dismounted soldier operating in the urban environment. The work conducted by the Army Research Laboratory, discussed in this paper will be transitioned to the FCS-Small Unattended Ground Vehicle (SUGV) program and FFW. The Army Research Laboratory is already working with these programs to ensure a feasible migration path. This paper focuses on four areas relating to acoustic sensing on robots for the urban environment as demonstrated at the DoD Horizontal Fusion Portfolio"s Warriors Edge (WE) Quantum Leap II (QL II) demonstration at Ft Benning, GA in August, 2004: small (man-portable) robot detection, mule-sized robot detection, sensor fusion across multiple platforms, and soldier/robot team interaction.

Feature: Special Needs.

ERIC Educational Resources Information Center

Flores, Miguel R.; And Others

1993-01-01

Includes "Filling in the Cracks" (Flores) about an intarsia class for at-risk students; "Closing the Gap--Women in Technology" (Husher) about summer camps for junior high girls; "Work Force of the Future--Multi-Ethnic, Multicultural" (Hall) about vocational education for culturally diverse students;…

Perception of force and stiffness in the presence of low-frequency haptic noise

PubMed Central

Gurari, Netta; Okamura, Allison M.; Kuchenbecker, Katherine J.

2017-01-01

Objective This work lays the foundation for future research on quantitative modeling of human stiffness perception. Our goal was to develop a method by which a human’s ability to perceive suprathreshold haptic force stimuli and haptic stiffness stimuli can be affected by adding haptic noise. Methods Five human participants performed a same-different task with a one-degree-of-freedom force-feedback device. Participants used the right index finger to actively interact with variations of force (∼5 and ∼8 N) and stiffness (∼290 N/m) stimuli that included one of four scaled amounts of haptically rendered noise (None, Low, Medium, High). The haptic noise was zero-mean Gaussian white noise that was low-pass filtered with a 2 Hz cut-off frequency; the resulting low-frequency signal was added to the force rendered while the participant interacted with the force and stiffness stimuli. Results We found that the precision with which participants could identify the magnitude of both the force and stiffness stimuli was affected by the magnitude of the low-frequency haptically rendered noise added to the haptic stimulus, as well as the magnitude of the haptic stimulus itself. The Weber fraction strongly correlated with the standard deviation of the low-frequency haptic noise with a Pearson product-moment correlation coefficient of ρ > 0.83. The mean standard deviation of the low-frequency haptic noise in the haptic stimuli ranged from 0.184 N to 1.111 N across the four haptically rendered noise levels, and the corresponding mean Weber fractions spanned between 0.042 and 0.101. Conclusions The human ability to perceive both suprathreshold haptic force and stiffness stimuli degrades in the presence of added low-frequency haptic noise. Future work can use the reported methods to investigate how force perception and stiffness perception may relate, with possible applications in haptic watermarking and in the assessment of the functionality of peripheral pathways in individuals with haptic impairments. PMID:28575068

The Impact of Technology on the Work Force.

ERIC Educational Resources Information Center

Braden, Paul V.

1988-01-01

Examines factors affecting the nation's present and future workforce: rapid technological advancements; other nations' use of advanced technologies and industrial targeting strategies; demographic factors; and changing values in the workplace. Sees needs for lifelong skills retraining, efforts to ensure industrial competitiveness, new…

[Medical support of Russian Armed Forces: the results and perspectives].

PubMed

Shappo, V V

2008-01-01

The results of work of the Russian Federation Armed Forces medical service obtained in 2007 were summarized and the main problems of its activities in the current year and the very near future were determined. So the work at defining medical support as a type of Army and Navy support was began. The most important task of medical service in 2008 is realization of the Armed Forces medical support conception and goal-oriented program "The improvement of Russian Federation Armed Forces medical support in 2008-2012", the formation of two-level system of personnel's medical support. During the task realization the medical units and institutions are reorganized into federal state institutions. The RF DM Main Military Medical Headquarters works at significant improvement of war and military service veterans' medical attendance. The departmental program "Development of material and technical basis of military medical institutions for 2001-2010" is successfully realized. The measures to optimize the assignment of graduates from military medical higher schools are carried out. The tasks to improve the research work were outlined. The new principles of organization of military medical service control and work will be based on centralization of planning and decentralization of decision implementation, the possibility of military medical units to carry it out taking into account the common intention, safe feedback in order to make the work of army and navy medical specialists more effective in any conditions.

Precision GPS ephemerides and baselines

NASA Technical Reports Server (NTRS)

1991-01-01

Based on the research, the area of precise ephemerides for GPS satellites, the following observations can be made pertaining to the status and future work needed regarding orbit accuracy. There are several aspects which need to be addressed in discussing determination of precise orbits, such as force models, kinematic models, measurement models, data reduction/estimation methods, etc. Although each one of these aspects was studied at CSR in research efforts, only points pertaining to the force modeling aspect are addressed.

What is the prevalence of and associations with forced labour experiences among male migrants from Dolakha, Nepal? Findings from a cross-sectional study of returnee migrants.

PubMed

Mak, Joelle; Abramsky, Tanya; Sijapati, Bandita; Kiss, Ligia; Zimmerman, Cathy

2017-08-11

Growing numbers of people are migrating outside their country for work, and many experience precarious conditions, which have been linked to poor physical and mental health. While international dialogue on human trafficking, forced labour and slavery increases, prevalence data of such experiences remain limited. Men from Dolakha, Nepal, who had ever migrated outside of Nepal for work were interviewed on their experiences, from predeparture to return (n=194). Forced labour was assessed among those who returned within the past 10 years (n=140) using the International Labour Organization's forced labour dimensions: (1) unfree recruitment ; (2) work and life under duress ; and (3) impossibility to leave employer . Forced labour is positive if any one of the dimensions is positive. Participants had worked in India (34%), Malaysia (34%) and the Gulf Cooperation Council countries (29%), working in factories (29%), as labourers/porters (15%) or in skilled employment (12%). Among more recent returnees (n=140), 44% experienced unfree recruitment , 71% work and life under duress and 14% impossibility to leave employer . Overall, 73% experienced forced labour during their most recent labour migration.Forced labour was more prevalent among those who had taken loans for their migration (PR 1.23) and slightly less prevalent among those who had migrated more than once (PR 0.87); however the proportion of those who experienced forced labour was still high (67%). Age, destination and duration of stay were associated with only certain dimensions of forced labour. Forced labour experiences were common during recruitment and at destination. Migrant workers need better advice on assessing agencies and brokers, and on accessing services at destinations. As labour migration from Nepal is not likely to reduce in the near future, interventions and policies at both source and destinations need to better address the challenges migrants face so they can achieve safer outcomes. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

AGU's new task force on scientific ethics and integrity begins work

NASA Astrophysics Data System (ADS)

Gleick, Peter; Townsend, Randy

2011-11-01

In support of the new strategic plan, AGU has established a new task force to review, evaluate, and update the Union's policies on scientific misconduct and the process for investigating and responding to allegations of possible misconduct by AGU members. As noted by AGU president Michael McPhaden, "AGU can only realize its vision of `collaboratively advancing and communicating science and its power to ensure a sustainable future' if we have the trust of the public and policy makers. That trust is earned by maintaining the highest standards of scientific integrity in all that we do. The work of the Task Force on Scientific Ethics is essential for defining norms of professional conduct that all our members can aspire to and that demonstrate AGU's unwavering commitment to excellence in Earth and space science."

Non-invasive current and voltage imaging techniques for integrated circuits using scanning probe microscopy. Final report, LDRD Project FY93 and FY94

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, A.N.; Cole, E.I. Jr.; Tangyunyong, Paiboon

This report describes the first practical, non-invasive technique for detecting and imaging currents internal to operating integrated circuits (ICs). This technique is based on magnetic force microscopy and was developed under Sandia National Laboratories` LDRD (Laboratory Directed Research and Development) program during FY 93 and FY 94. LDRD funds were also used to explore a related technique, charge force microscopy, for voltage probing of ICs. This report describes the technical work performed under this LDRD as well as the outcomes of the project in terms of publications and awards, intellectual property and licensing, synergistic work, potential future work, hiring ofmore » additional permanent staff, and benefits to DOE`s defense programs (DP).« less

CONTACT: An Air Force technical report on military satellite control technology

NASA Astrophysics Data System (ADS)

Weakley, Christopher K.

1993-07-01

This technical report focuses on Military Satellite Control Technologies and their application to the Air Force Satellite Control Network (AFSCN). This report is a compilation of articles that provide an overview of the AFSCN and the Advanced Technology Program, and discusses relevant technical issues and developments applicable to the AFSCN. Among the topics covered are articles on Future Technology Projections; Future AFSCN Topologies; Modeling of the AFSCN; Wide Area Communications Technology Evolution; Automating AFSCN Resource Scheduling; Health & Status Monitoring at Remote Tracking Stations; Software Metrics and Tools for Measuring AFSCN Software Performance; Human-Computer Interface Working Group; Trusted Systems Workshop; and the University Technical Interaction Program. In addition, Key Technology Area points of contact are listed in the report.

Molecular Force Spectroscopy on Cells

NASA Astrophysics Data System (ADS)

Liu, Baoyu; Chen, Wei; Zhu, Cheng

2015-04-01

Molecular force spectroscopy has become a powerful tool to study how mechanics regulates biology, especially the mechanical regulation of molecular interactions and its impact on cellular functions. This force-driven methodology has uncovered a wealth of new information of the physical chemistry of molecular bonds for various biological systems. The new concepts, qualitative and quantitative measures describing bond behavior under force, and structural bases underlying these phenomena have substantially advanced our fundamental understanding of the inner workings of biological systems from the nanoscale (molecule) to the microscale (cell), elucidated basic molecular mechanisms of a wide range of important biological processes, and provided opportunities for engineering applications. Here, we review major force spectroscopic assays, conceptual developments of mechanically regulated kinetics of molecular interactions, and their biological relevance. We also present current challenges and highlight future directions.

Using the method of dominant incorrect answers with the FCI test to diagnose misconceptions held by first year college students

NASA Astrophysics Data System (ADS)

Bani-Salameh, Hisham N.

2017-01-01

We started this work with the goal of detecting misconceptions held by our students about force and motion. A total of 341 students participated in this study by taking the force concept inventory (FCI) test both before and after receiving instructions about force or motion. The data from this study were analysed using different statistical techniques with results from frequencies and the dominant incorrect answer reported in this paper. All misconceptions reported in the original paper of the designers of the FCI test (Hestenes et al 1992 Phys. Teach. 30 141-58) were examined and the results are reported. Only pre test results are reported in this paper leaving post data for future work. We used the modified version of the FCI containing 30 questions and therefore used the revised list of misconceptions. Problems with impetus and active force are among the most dominant ones found with the full list reported in this paper.

Anthropometry as a predictor of high speed performance.

PubMed

Caruso, J F; Ramey, E; Hastings, L P; Monda, J K; Coday, M A; McLagan, J; Drummond, J

2009-07-01

To assess anthropometry as a predictor of high-speed performance, subjects performed four seated knee- and hip-extension workouts with their left leg on an inertial exercise trainer (Impulse Technologies, Newnan GA). Workouts, done exclusively in either the tonic or phasic contractile mode, entailed two one-minute sets separated by a 90-second rest period and yielded three performance variables: peak force, average force and work. Subjects provided the following anthropometric data: height, weight, body mass index, as well as total, upper and lower left leg lengths. Via multiple regression, anthropometry attempted to predict the variance per performance variable. Anthropometry explained a modest (R2=0.27-0.43) yet significant degree of variance from inertial exercise trainer workouts. Anthropometry was a better predictor of peak force variance from phasic workouts, while it accounted for a significant degree of average force and work variance solely from tonic workouts. Future research should identify variables that account for the unexplained variance from high-speed exercise performance.

Investigation of free-forced convection flows in cavity-type receivers. Final yearly report, 1979-1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphrey, J.A.C.

1982-01-01

A summary is provided of the first of three years of experimental and theoretical research on free-forced convection flows in cavity-type solar receivers. New experimental and theoretical results are presented and discussed. The implication of these findings, with respect to the future thrust of the research program, is clarified as well as is possible at the present time. Following various related conclusions a summary and tentative schedule of work projected for year two of research are presented.

Air Force Reusable Booster System A Quick-look, Design Focused Modeling and Cost Analysis Study

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2011-01-01

Presents work supporting the Air force Reusable Booster System (RBS) - A Cost Study with Goals as follows: Support US launch systems decision makers, esp. in regards to the research, technology and demonstration investments required for reusable systems to succeed. Encourage operable directions in Reusable Booster / Launch Vehicle Systems technology choices, system design and product and process developments. Perform a quick-look cost study, while developing a cost model for more refined future analysis.

2011 Agile (Scrum) Workshop Held in Baltimore, Maryland on November 14-15, 2011

DTIC Science & Technology

2011-11-15

have success- fully implemented Agile Development within DoD. SUSI MCKEE OC2IS Program Manager, U.S. Air Force Susana V. McKee has 25 years of DoD T...AGILE WILL WORK IN DOD: THREE EXAMPLES u Ms. Kelly Goshorn, Patriot Excalibur (PEX) Program Manager, U.S. Air Force u Ms. Susi McKee, Operational...OPS PEX Team: Internal •Devs/SMEs/Testers •Architecture Committee •Etc. none Future implementation, not Current release Big R/ Little r I n

Using RAND’s Military Career Model To Evaluate The Impact Of Institutional Requirements On The Air Force Space Officer Career Field

DTIC Science & Technology

2017-01-01

Using RAND’s Military Career Model to Evaluate the Impact of Institutional Requirements on the Air Force Space Officer Career Field...Military Career Model (MCM), a detailed personnel simulation model, to evaluate the impact of changes to IRs on the space officer (13S) career field. The...as well. We recommend that future work evaluate the impact of IRs on multiple career fields to determine which career fields have the most to gain

Ancient Wisdom, Applied Knowledge for a Sustainable Future

NASA Astrophysics Data System (ADS)

Peterson, K.; Philippe, R. Elde; Dardar, T. M. Elde

2017-12-01

Ancient wisdom informs traditional knowledges that guide Indigenous communities on how to interact with the world. These knowledges and the ancient wisdom have been the life-giving forces that have prevented the complete genocide of Indigenous peoples, and is also the wisdom that is rejuvenating ancient ways that will take the world into a future that embraces the seventh generation philosophy.. Western scientists and agency representatives are learning from the work and wisdom of Native Americans. This presentation will share the ways in which the representatives of two Tribes along the coast of Louisiana have been helping to educate and apply their work with Western scientists.

US Air Force perspective on validated NDE - Past, present, and future

NASA Astrophysics Data System (ADS)

Lindgren, Eric A.

2016-02-01

The concept of inspection has accompanied aviation since the work of the Wright Brothers. Inspection for both initial quality/materials acceptance and readiness for flight have been coupled with US Air Force (USAF) since its inception as the US Army Signal Corps. Initial nondestructive evaluation work expanded beyond visual inspection to include radiography and magnetic particle in the 1920's and 1930's as air frames transitioned to metal and engines used higher strength steels. Within the USAF Research and Development community, a Nondestructive Test Section was stood up in 1952 and the Nondestructive Evaluation Branch (NDE) was established in 1974. In 2012 the name was changed to the Materials State Awareness Branch. This name change reflects the evolution from a primary focus on inspections for damage and defects in materials to the characterization of the underlying materials structure that governs properties of the materials of interest for Air Force applications.

The American Academic Profession.

ERIC Educational Resources Information Center

Graubard, Stephen R., Ed.

This collection focuses on the forces that have worked together to create the U.S. system of higher education. Contributors consider the development of the university system, the present role of the university, and the future of higher education. The chapters are: (1) "How the Academic Profession Is Changing" (Arthur Levine); (2) "Small Worlds,…

Training Implications for Our Graying Work Force.

ERIC Educational Resources Information Center

Clark, Susan K.

1994-01-01

Discusses future increases in the number of older employees in the workforce; outlines physiological changes in vision, hearing, and memory that are known to occur as part of the aging process; and suggests training adaptations to diminish or eliminate the adverse consequences of these changes in a learning environment. (LRW)

Class of 1994, Annual Report: NH Technical Colleges and Institute and NH Police Standards and Training.

ERIC Educational Resources Information Center

New Hampshire State Dept. of Postsecondary Technical Education, Concord.

This 1994 annual report for the New Hampshire Technical Colleges and Institute System (NHTC&IS) includes information on enrollments, outcomes, job placement, average salaries, transfer institutions, work force training, the Police Academy, finances, future directions, and governance. Introductory material highlights the following…

Making Assets out of Tomorrow's Elderly.

ERIC Educational Resources Information Center

Chen, Yung-Ping

1987-01-01

Uses concept of equivalent retirement ages to explain old age dependency ratio. Asserts that a future larger, able aging population could continue to work, compensating for the smaller, younger labor force. Economic growth as the foundation of economic security is emphasized as a means of lessening cost of caring for society's dependents.…

The Digital Workforce: Update, August 2000 [and] The Digital Work Force: State Data & Rankings, September 2000.

ERIC Educational Resources Information Center

Sargent, John

The Office of Technology Policy analyzed Bureau of Labor Statistics' growth projections for the core occupational classifications of IT (information technology) workers to assess future demand in the United States. Classifications studied were computer engineers, systems analysts, computer programmers, database administrators, computer support…

Hierarchical atom type definitions and extensible all-atom force fields.

PubMed

Jin, Zhao; Yang, Chunwei; Cao, Fenglei; Li, Feng; Jing, Zhifeng; Chen, Long; Shen, Zhe; Xin, Liang; Tong, Sijia; Sun, Huai

2016-03-15

The extensibility of force field is a key to solve the missing parameter problem commonly found in force field applications. The extensibility of conventional force fields is traditionally managed in the parameterization procedure, which becomes impractical as the coverage of the force field increases above a threshold. A hierarchical atom-type definition (HAD) scheme is proposed to make extensible atom type definitions, which ensures that the force field developed based on the definitions are extensible. To demonstrate how HAD works and to prepare a foundation for future developments, two general force fields based on AMBER and DFF functional forms are parameterized for common organic molecules. The force field parameters are derived from the same set of quantum mechanical data and experimental liquid data using an automated parameterization tool, and validated by calculating molecular and liquid properties. The hydration free energies are calculated successfully by introducing a polarization scaling factor to the dispersion term between the solvent and solute molecules. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

The MJO-SSW Teleconnection: Interaction Between MJO-Forced Waves and the Midlatitude Jet

NASA Astrophysics Data System (ADS)

Kang, Wanying; Tziperman, Eli

2018-05-01

The Madden-Julian Oscillation (MJO) was shown to affect both present-day sudden stratospheric warming (SSW) events in the Arctic and their future frequency under global warming scenarios, with implications to the Arctic Oscillation and midlatitude extreme weather. This work uses a dry dynamic core model to understand the dependence of SSW frequency on the amplitude and longitudinal range of the MJO, motivated by the prediction that the MJO will strengthen and broaden its longitudinal range in a warmer climate. We focus on the response of the midlatitude jets and the corresponding generated stationary waves, which are shown to dominate the response of SSW events to MJO forcing. Momentum budget analysis of a large ensemble of spinup simulations suggests that the climatological jet response is driven by the MJO-forced meridional eddy momentum transport. The results suggest that the trends in both MJO amplitude and longitudinal range are important for the prediction of the midlatitude jet response and for the prediction of SSWs in a future climate.

The Future of Military Graduate Medical Education

DTIC Science & Technology

1992-01-08

Army alone is the country’s largest comprehensive Health Maintenance Organization(HMO). Over the past 45 years, this work force, balancing the competing...that have to be balanced to protect national priorities. As always, costs and budgets will play a major role in determining what is maintained and...a slightly different way. For instance, the Navy generally requires all its medical officers to do some general medical officer work before going on

A Priori Calculations of Thermodynamic Functions

DTIC Science & Technology

1991-12-01

Ten closes this work with a brief summary and offers suggestions for improving the model and for future research. S CHAPTER TWO In this chapter, we...we must first define the theoretical model . The molecules studied in this work contain up to 10 non- hydrogen atoms and, in general, are not...is given by equation (2-31) for two different geometries or two different theoretical models . Equation (2-31) shows the error in the force constant has

The Changing Situation of Workers and Their Unions. A Report by the AFL-CIO Committee on the Evolution of Work.

ERIC Educational Resources Information Center

American Federation of Labor and Congress of Industrial Organizations, Washington, DC.

This report reviews the changing role of labor unions in the United States today and proposes actions to increase union membership and strength in the future. The report is organized in 10 sections. The first section describes changes in the work force, especially during the 1960s and 1970s. It is followed by sections describing (1) the failure of…

Overcoming parochialism: interdisciplinary training of the generalist team.

PubMed

Benson, J A

1997-01-01

The work force that will staff most health care systems of the future will include a complex array of professionals working together in teams. The traditional inpatient model of patient care has been only multidisciplinary--nurses, medical social workers, dietitians, pharmacists, and physicians, all interested in each patient, but with divided responsibilities, training formats, and faculties--whereas interdisciplinary teams openly share decision making, expectations for care, goals for the team, and mutual respect.

A model of involvement in work-related learning and development activity: the effects of individual, situational, motivational, and age variables.

PubMed

Maurer, Todd J; Weiss, Elizabeth M; Barbeite, Francisco G

2003-08-01

Eight hundred employees from across the U.S. work force participated in a detailed 13-month longitudinal study of involvement in learning and development activities. A new model was posited and tested in which the hypothesized sequence was as follows: worker age --> individual and situational antecedents --> perceived benefits of participation and self-efficacy for development --> attitudes toward development --> intentions to participate --> participation. The results depict a person who is oriented toward employee development as having participated in development activities before, perceiving themselves as possessing qualities needed for learning, having social support for development at work and outside of work, being job involved, having insight into his or her career, and believing in the need for development, in his or her ability to develop skills and to receive intrinsic benefits from participating. Given the aging work force, a detailed treatment of age differences in development is presented. Implications for new ideas in practice and future research are discussed.

The Hospital of the Future. Megatrends, Driving Forces, Barriers to Implementation, Overarching Perspectives, Major Trends into the Future, Implications for TATRC And Specific Recommendations for Action

DTIC Science & Technology

2008-10-01

Healthcare Systems Will Be Those That Work With Data/Info In New Ways • Artificial Intelligence Will Come to the Fore o Effectively Acquire...Education • Artificial Intelligence Will Assist in o History and Physical Examination o Imaging Selection via algorithms o Test Selection via algorithms...medical language into a simulation model based upon artificial intelligence , and • the content verification and validation of the cognitive

Aircraft Modifications: Assessing the Current State of Air Force Aircraft Modifications and the Implications for Future Military Capability

DTIC Science & Technology

2007-01-25

Air, Space , and Cyberspace." Introduction 3 group production lots together into ’spirals’ or ’increments’. These groupings, as well as an increased...important reference point for this work. The analysis of the modification process presented in this reserach , however, does help shed light on the...planning efforts. Chapter 7- The Future of Aircraft Modifications "Strategy is the art of making use of time and space . I am less concerned about the

Conference-EC-US Task Force Joint US-EU Workshop on Metabolomics and Environmental Biotechnology

DOE Office of Scientific and Technical Information (OSTI.GOV)

PI: Lily Y. Young

2009-06-04

Since 1990, the EC-US Task Force on Biotechnology Research has been coordinating transatlantic efforts to guide and exploit the ongoing revolution in biotechnology and the life sciences. The Task Force was established in June 1990 by the European Commission and the White House Office of Science and Technology Policy. The Task Force has acted as an effective forum for discussion, coordination, and development of new ideas for the last 18 years. Task Force members are European Commission and US Government science and technology administrators who meet annually to enhance communication across the Atlantic, and to encourage collaborative research. Through sponsoringmore » workshops, and other activities, the Task Force also brings together scientific leaders and early career researchers from both sides of the Atlantic to forecast research challenges and opportunities and to promote better links between researchers. Over the years, by keeping a focus on the future of science, the Task Force has played a key role in establishing a diverse range of emerging scientific fields, including biodiversity research, neuroinformatics, genomics, nanobiotechnology, neonatal immunology, transkingdom molecular biology, biologically-based fuels, and environmental biotechnology. The EC-US Task Force has sponsored a number of Working Groups on topics of mutual transatlantic interest. The idea to create a Working Group on Environmental Biotechnology research was discussed in the Task Force meeting of October 1993. The EC-US Working Group on Environmental Biotechnology set as its mission 'To train the next generation of leaders in environmental biotechnology in the United States and the European Union to work collaboratively across the Atlantic.' Since 1995, the Working Group supported three kinds of activities, all of which focus one early career scientists: (1) Workshops on the use of molecular methods and genomics in environmental biotechnology; (2) Short courses with theoretical, laboratory and field elements; and (3) Short term exchange fellowships. The short term exchange fellowships were created to enable young scientists to develop collaborations with colleagues across the Atlantic and to learn a new skill or expertise in the area of environmental biotechnology.« less

Investigating biomolecular recognition at the cell surface using atomic force microscopy.

PubMed

Wang, Congzhou; Yadavalli, Vamsi K

2014-05-01

Probing the interaction forces that drive biomolecular recognition on cell surfaces is essential for understanding diverse biological processes. Force spectroscopy has been a widely used dynamic analytical technique, allowing measurement of such interactions at the molecular and cellular level. The capabilities of working under near physiological environments, combined with excellent force and lateral resolution make atomic force microscopy (AFM)-based force spectroscopy a powerful approach to measure biomolecular interaction forces not only on non-biological substrates, but also on soft, dynamic cell surfaces. Over the last few years, AFM-based force spectroscopy has provided biophysical insight into how biomolecules on cell surfaces interact with each other and induce relevant biological processes. In this review, we focus on describing the technique of force spectroscopy using the AFM, specifically in the context of probing cell surfaces. We summarize recent progress in understanding the recognition and interactions between macromolecules that may be found at cell surfaces from a force spectroscopy perspective. We further discuss the challenges and future prospects of the application of this versatile technique. Copyright © 2014 Elsevier Ltd. All rights reserved.

Bioinformatics: indispensable, yet hidden in plain sight?

PubMed

Bartlett, Andrew; Penders, Bart; Lewis, Jamie

2017-06-21

Bioinformatics has multitudinous identities, organisational alignments and disciplinary links. This variety allows bioinformaticians and bioinformatic work to contribute to much (if not most) of life science research in profound ways. The multitude of bioinformatic work also translates into a multitude of credit-distribution arrangements, apparently dismissing that work. We report on the epistemic and social arrangements that characterise the relationship between bioinformatics and life science. We describe, in sociological terms, the character, power and future of bioinformatic work. The character of bioinformatic work is such that its cultural, institutional and technical structures allow for it to be black-boxed easily. The result is that bioinformatic expertise and contributions travel easily and quickly, yet remain largely uncredited. The power of bioinformatic work is shaped by its dependency on life science work, which combined with the black-boxed character of bioinformatic expertise further contributes to situating bioinformatics on the periphery of the life sciences. Finally, the imagined futures of bioinformatic work suggest that bioinformatics will become ever more indispensable without necessarily becoming more visible, forcing bioinformaticians into difficult professional and career choices. Bioinformatic expertise and labour is epistemically central but often institutionally peripheral. In part, this is a result of the ways in which the character, power distribution and potential futures of bioinformatics are constituted. However, alternative paths can be imagined.

Solubility of NaCl in water by molecular simulation revisited.

PubMed

Aragones, J L; Sanz, E; Vega, C

2012-06-28

In this paper, the solubility of NaCl in water is evaluated by using computer simulations for three different force fields. The condition of chemical equilibrium (i.e., equal chemical potential of the salt in the solid and in the solution) is obtained at room temperature and pressure to determine the solubility of the salt. We used the same methodology that was described in our previous work [E. Sanz and C. Vega, J. Chem. Phys. 126, 014507 (2007)] although several modifications were introduced to improve the accuracy of the calculations. It is found that the predictions of the solubility are quite sensitive to the details of the force field used. Certain force fields underestimate the experimental solubility of NaCl in water by a factor of four, whereas the predictions of other force fields are within 20% of the experimental value. Direct coexistence molecular dynamic simulations were also performed to determine the solubility of the salt. Reasonable agreement was found between the solubility obtained from free energy calculations and that obtained from direct coexistence simulations. This work shows that the evaluation of the solubility of salts in water can now be performed in computer simulations. The solubility depends on the ion-ion, ion-water, and water-water interactions. For this reason, the prediction of the solubility can be quite useful in future work to develop force fields for ions in water.

How will precipitation change in extratropical cyclones as the planet warms? Insights from a large initial condition climate model ensemble

NASA Astrophysics Data System (ADS)

Yettella, Vineel; Kay, Jennifer E.

2017-09-01

The extratropical precipitation response to global warming is investigated within a 30-member initial condition climate model ensemble. As in observations, modeled cyclonic precipitation contributes a large fraction of extratropical precipitation, especially over the ocean and in the winter hemisphere. When compared to present day, the ensemble projects increased cyclone-associated precipitation under twenty-first century business-as-usual greenhouse gas forcing. While the cyclone-associated precipitation response is weaker in the near-future (2016-2035) than in the far-future (2081-2100), both future periods have similar patterns of response. Though cyclone frequency changes are important regionally, most of the increased cyclone-associated precipitation results from increased within-cyclone precipitation. Consistent with this result, cyclone-centric composites show statistically significant precipitation increases in all cyclone sectors. Decomposition into thermodynamic (mean cyclone water vapor path) and dynamic (mean cyclone wind speed) contributions shows that thermodynamics explains 92 and 95% of the near-future and far-future within-cyclone precipitation increases respectively. Surprisingly, the influence of dynamics on future cyclonic precipitation changes is negligible. In addition, the forced response exceeds internal variability in both future time periods. Overall, this work suggests that future cyclonic precipitation changes will result primarily from increased moisture availability in a warmer world, with secondary contributions from changes in cyclone frequency and cyclone dynamics.

Optimizing Protein-Protein van der Waals Interactions for the AMBER ff9x/ff12 Force Field.

PubMed

Chapman, Dail E; Steck, Jonathan K; Nerenberg, Paul S

2014-01-14

The quality of molecular dynamics (MD) simulations relies heavily on the accuracy of the underlying force field. In recent years, considerable effort has been put into developing more accurate dihedral angle potentials for MD force fields, but relatively little work has focused on the nonbonded parameters, many of which are two decades old. In this work, we assess the accuracy of protein-protein van der Waals interactions in the AMBER ff9x/ff12 force field. Across a test set of 44 neat organic liquids containing the moieties present in proteins, we find root-mean-square (RMS) errors of 1.26 kcal/mol in enthalpy of vaporization and 0.36 g/cm(3) in liquid densities. We then optimize the van der Waals radii and well depths for all of the relevant atom types using these observables, which lowers the RMS errors in enthalpy of vaporization and liquid density of our validation set to 0.59 kcal/mol (53% reduction) and 0.019 g/cm(3) (46% reduction), respectively. Limitations in our parameter optimization were evident for certain atom types, however, and we discuss the implications of these observations for future force field development.

CAM/LIFTER forces and friction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabbey, D.J.; Lee, J.; Patterson, D.J.

1992-02-01

This report details the procedures used to measure the cam/lifter forces and friction. The present effort employed a Cummins LTA-10, and focuses on measurements and dynamic modeling of the injector train. The program was sponsored by the US Department of Energy in support of advanced diesel engine technology. The injector train was instrumented to record the instantaneous roller speed, roller pin friction torque, pushrod force, injector link force and cam speed. These measurements, together with lift profiles for pushrod and injector link displacement, enabled the friction work loss in the injector train to be determined. Other significant design criteria suchmore » as camshaft roller follower slippage and maximum loads on components were also determined. Future efforts will concentrate on the dynamic model, with tests run as required for correlation.« less

Beyond-proximity-force-approximation Casimir force between two spheres at finite temperature

NASA Astrophysics Data System (ADS)

Bimonte, Giuseppe

2018-04-01

A recent experiment [J. L. Garrett, D. A. T. Somers, and J. N. Munday, Phys. Rev. Lett. 120, 040401 (2018), 10.1103/PhysRevLett.120.040401] measured for the first time the gradient of the Casimir force between two gold spheres at room temperature. The theoretical analysis of the data was carried out using the standard proximity force approximation (PFA). A fit of the data, using a parametrization of the force valid for the sphere-plate geometry, was used by the authors to place a bound on deviations from PFA. Motivated by this work, we compute the Casimir force between two gold spheres at finite temperature. The semianalytic formula for the Casimir force that we construct is valid for all separations, and can be easily used to interpret future experiments in both the sphere-plate and sphere-sphere configurations. We describe the correct parametrization of the corrections to PFA for two spheres that should be used in data analysis.

Challenges and Opportunities in Adult Education.

ERIC Educational Resources Information Center

Brand, Betsy

Literacy and work force preparedness are two of the most important issues facing education today. Findings of nationwide studies show that reading and writing performance of students is inadequate. One of every eight current workers reads at the fourth-grade level or lower. The nation's economic future will be determined by the quality and…

3 CFR - Establishing a Task Force on Skills for America's Future

Code of Federal Regulations, 2011 CFR

2011-01-01

... of promising approaches to improving the skills of our Nation's workers. By coordinating the work of... of the past. We therefore must develop innovative strategies to train more Americans with the skills... in every part of the country, from rural communities to urban centers. Therefore, I am establishing a...

The Digital Work Force: Building Infotech Skills at the Speed of Innovation.

ERIC Educational Resources Information Center

Meares, Carol Ann; Sargent, John F., Jr.

This report is the product of an effort by the Office of Technology Policy to assess current and future needs for information technology (IT) workers through a comprehensive information-gathering project that included the following three activities: (1) nationwide regional meetings that included discussions with industry executives,…

Small Wars 2.0: A Working Paper on Land Force Planning After Iraq and Afghanistan

DTIC Science & Technology

2011-02-01

official examination of future ground combat demands that look genetically distinct from those undertaken in the name of the WoT. The concept of...under the worst-case rubric but for very different reasons. The latter are small wars. However, that by no means aptly describes their size

More Gender Diversity Will Mean Better Science

ERIC Educational Resources Information Center

Rosser, Sue V.

2012-01-01

As more women choose careers in the sciences, the stakes are higher than ever before. Having women in key decision-making positions in the scientific and technological work force is critical to the future of society. Successful senior female scientists serve as a prime source of leadership for top academic administrative positions. A more diverse…

Vocational Education at the Crossroads.

ERIC Educational Resources Information Center

Merkel-Keller, Claudia

The United States faces stiff global competition in the marketplace of the future as other countries such as Germany, Japan, and the nations of the Pacific rim produce better products with a more skilled work force. Germany and Japan spend far more resources on job training for their youth than does the United States, especially on training…

Delivering Sustainable Practice? A Case Study of the Scottish Active Schools Programme

ERIC Educational Resources Information Center

Reid, Gavin

2009-01-01

Since 1999, concerns about Scotland's future health and economic performance have profoundly impacted on the new Scottish Executive. Research highlighting an obesity crisis facing young Scots has, together with the work of Scotland's Physical Activity Task Force and Physical Education Review Group, encouraged the education of all young Scots to be…

Getting Ready for the Real World: Student Perspectives on Bringing Industry Collaboration into the Classroom

ERIC Educational Resources Information Center

Marcketti, Sara B.; Karpova, Elena

2014-01-01

Learning through industry collaborations is critical in decreasing the gap between the real world and the academic environment. Working on challenges drawn from industry can increase students' knowledge and future employability, thus enhancing labor force preparation. This study explored students' perceptions (n = 110) of the benefits…

Globalization and the Business Schools: Toward Business and World-Sustainable Leadership

ERIC Educational Resources Information Center

Dieck-Assad, María de Lourdes

2013-01-01

Globalization is a force that produces deep changes in business and society. Business schools face great challenges and opportunities in educating future leaders who can work across countries and cultures. This article presents some strategic issues regarding the type of education that business schools should offer from a global perspective, aimed…

Forced Folds and Craters of Elevation in the Afar

NASA Astrophysics Data System (ADS)

Hetherington, Rachel; Mussetti, Giulio; Hagos, Miruts; Deering, Chad; Corti, Giacomo; Magee, Craig; Ian, Bastow; van Wyk de Vries, Benjamin; Marques, Alvaro

2015-04-01

Uplifts caused by magma intrusion have been observed and mapped since the pioneering work of von Buch two hundred years ago. Von Buch's "Craters of elevation theory", developed in the Auvergne and Canaries, was, unfortunately, discredited and mostly forgotten until recent work has shown that the forced folds mapped in seismic sections in sedimentary basins are the same type of feature. Also, these magmatic bulges are being found on an increasing number of volcanoes. The Danakil region of Ethiopia contains a superb range of forced folds with craters of elevation, which we have mapped using Google Earth and other satellite imagery, and some ground truthing. This preliminary work provides a geological map that is inspired from the 1970 Barberi and Vallet map, and which sets out in detail the structure and lava flow units of this area. We describe the main structures of each uplift, and suggest a preliminary general structural evolutionary pattern that provides a model for future research. This work has been untertaken by a group from multiple universities sharing interpretations and data in an open format. We aim to continue this work to study these superb geological features. Their superb nature and preservation is such that we would also press for them to be made a geoheritage reserve of global importance: Either a Geopark or a World Heritage site.

Pediatrics in the year 2020 and beyond: preparing for plausible futures.

PubMed

Starmer, Amy J; Duby, John C; Slaw, Kenneth M; Edwards, Anne; Leslie, Laurel K

2010-11-01

Although the future of pediatrics is uncertain, the organizations that lead pediatrics, and the professionals who practice within it, have embraced the notion that the pediatric community must anticipate and lead change to ultimately improve the health of children and adolescents. In an attempt to proactively prepare for a variety of conceivable futures, the board of directors of the American Academy of Pediatrics established the Vision of Pediatrics 2020 Task Force in 2008. This group was charged to think broadly about the future of pediatrics, to gather input on key trends that are influencing the future, to create likely scenarios of the future, and to recommend strategies to best prepare pediatric clinicians and pediatric organizations for a range of potential futures. The work of this task force led to the development of 8 "megatrends" that were identified as highly likely to have a profound influence on the future of pediatrics. A separate list of "wild-card" scenarios was created of trends with the potential to have a substantial influence but are less likely to occur. The process of scenario-planning was used to consider the effects of the 8 megatrends on pediatrics in the year 2020 and beyond. Consideration of these possible scenarios affords the opportunity to determine potential future pediatric needs, to identify potential solutions to address those needs, and, ultimately, to proactively prepare the profession to thrive if these or other future scenarios become realities.

Leadership Seminar 1989: Workforce 2000. Proceedings of the American Association of Community and Junior Colleges' and St. Petersburg Junior College's Annual Leadership Seminar (2nd, Grand Rapids, Michigan, October 26-27, 1989).

ERIC Educational Resources Information Center

Kuttler, Carl M., Jr.; And Others

In October 1989, St. Petersburg Junior College and the American Association of Community and Junior Colleges sponsored a seminar on strategies that community and junior colleges can use in working with business and industry to meet America's future work force needs. The proceedings of the seminar contains the text of presentations by nine…

Occupational Education in the Large Five Cities. Statement before the New York State Assembly Education Committee (Albany, New York, March 2, 1988). Capsule Report 88-11-CR-A.

ERIC Educational Resources Information Center

Sobol, Thomas

This document reports the policy statement of the President of the University of the State of New York regarding vocational education in the five largest cities in the state. The statement provides background on how changes in the economy and the organization of work will affect the skills needed by the work force of the future. It also indicates…

Vocational Psychology: Agency, Equity, and Well-Being.

PubMed

Brown, Steven D; Lent, Robert W

2016-01-01

The present review organizes the vocational psychology literature published between 2007 and 2014 into three overarching themes: Promoting (a) agency in career development, (b) equity in the work force, and (c) well-being in work and educational settings. Research on career adaptability, self-efficacy beliefs, and work volition is reviewed in the agency section, with the goal of delineating variables that promote or constrain the exercise of personal agency in academic and occupational pursuits. The equity theme covers research on social class and race/ethnicity in career development; entry and retention of women and people of color in science, technology, engineering, and math (STEM) fields; and the career service needs of survivors of domestic violence and of criminal offenders. The goal was to explore how greater equity in the work force could be promoted for these groups. In the well-being section, we review research on hedonic (work, educational, and life satisfaction) and eudaimonic (career calling, meaning, engagement, and commitment) variables, with the goal of understanding how well-being might be promoted at school and at work. Future research needs related to each theme are also discussed.

Developing a musculoskeletal model of the primate skull: predicting muscle activations, bite force, and joint reaction forces using multibody dynamics analysis and advanced optimisation methods.

PubMed

Shi, Junfen; Curtis, Neil; Fitton, Laura C; O'Higgins, Paul; Fagan, Michael J

2012-10-07

An accurate, dynamic, functional model of the skull that can be used to predict muscle forces, bite forces, and joint reaction forces would have many uses across a broad range of disciplines. One major issue however with musculoskeletal analyses is that of muscle activation pattern indeterminacy. A very large number of possible muscle force combinations will satisfy a particular functional task. This makes predicting physiological muscle recruitment patterns difficult. Here we describe in detail the process of development of a complex multibody computer model of a primate skull (Macaca fascicularis), that aims to predict muscle recruitment patterns during biting. Using optimisation criteria based on minimisation of muscle stress we predict working to balancing side muscle force ratios, peak bite forces, and joint reaction forces during unilateral biting. Validation of such models is problematic; however we have shown comparable working to balancing muscle activity and TMJ reaction ratios during biting to those observed in vivo and that peak predicted bite forces compare well to published experimental data. To our knowledge the complexity of the musculoskeletal model is greater than any previously reported for a primate. This complexity, when compared to more simple representations provides more nuanced insights into the functioning of masticatory muscles. Thus, we have shown muscle activity to vary throughout individual muscle groups, which enables them to function optimally during specific masticatory tasks. This model will be utilised in future studies into the functioning of the masticatory apparatus. Copyright © 2012 Elsevier Ltd. All rights reserved.

Stability considerations for magnetic suspension systems using electromagnets mounted in a planar array

NASA Technical Reports Server (NTRS)

Groom, Nelson J.; Britcher, Colin P.

1991-01-01

Mathematical models of a 5, 6, 7, and 8 coil large gap magnetic suspension system (MSDS) are presented. Some of the topics covered include: force and torque equations, reduction of state-space form, natural modes, origins of modes, effect of rotation in azimuth (yaw), future work, and n-coil ring conclusions.

Poland's Education and Training: Boosting and Adapting Human Capital. OECD Economics Department Working Papers, No. 495

ERIC Educational Resources Information Center

O'Brien, Paul; Paczynski, Wojciech

2006-01-01

An effective system of education and training is important for both social and economic reasons. Its role in the Polish economy is to provide the current and future labour force with skills to facilitate both continuing productivity growth and reallocation of resources as structural adjustment proceeds. Important reforms to decentralise primary…

National Renewable Energy Laboratory To Reduce Staff

Science.gov Websites

employees. The reduction will occur in two phases. The first phase will be a Voluntary Separation Program to partners in industry and universities," said NREL Director Dr. Charles Gay. "Congressional budget mitigation of future staff reductions. NREL's work force reductions will be guided by a plan submitted to the

Invest in Children Today for a Work Force Tomorrow.

ERIC Educational Resources Information Center

Penning, Nick

1989-01-01

To confront the growing proportion of disadvantaged children amidst the shrinking pool of future workers, Jule Sugarman (Washington State Secretary of Social and Health Services) has proposed a Children's Trust to fund existing and new programs for children. The program would be funded by a .3 percent payroll tax for both employers and employees.…

Building Public-Private Partnerships To Improve Vocational Education in Illinois.

ERIC Educational Resources Information Center

Sheets, Robert G.; And Others

The Illinois Council on Vocational Education (ICoVE) launched a statewide study in 1990 to understand the perspectives of business and labor on what vocational education can do to prepare the work force with the skills necessary for the future. The study was designed to build new public-private partnerships. It included a survey of businesses and…

Understanding China's Demographic Dividends and Labor Issue

ERIC Educational Resources Information Center

Peng, Xizhe

2013-01-01

One of the major concerns about the one-child policy is its negative impact on the current and future labor force in China. People have talked about the Lewis Turning Point and the end of demographic dividends. Some of these arguments, however, can be misleading. The working-age population (ages 15 to 59) can be treated as the potential labor…

Better Benefits: Reforming Teacher Pensions for a Changing Work Force. Education Sector Reports

ERIC Educational Resources Information Center

Aldeman, Chad; Rotherham, Andrew J.

2010-01-01

Policymakers are beginning to take note of the fiscal problems in teacher retirement systems. States have recently taken action by raising retirement ages, lowering benefit payments, and reducing cost-of-living adjustments. These are small steps toward shoring up the system to help ensure that it remains sustainable in the future. But the problems…

Workforce Development for Communities in Crisis and Transition: A Case Study of the Windward Islands.

ERIC Educational Resources Information Center

Whittington, L. Alfons

The Windward Islands (Dominica, Grenada, St. Lucia, and St. Vincent and the Grenadines) have taken several approaches to educate the work force and prepare for the technology-driven society of the future. These approaches include government initiatives, such as the governments' commitment to primary education and more recently to secondary…

CAM/LIFTER forces and friction. Final report, September 15, 1988--November 30, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabbey, D.J.; Lee, J.; Patterson, D.J.

1992-02-01

This report details the procedures used to measure the cam/lifter forces and friction. The present effort employed a Cummins LTA-10, and focuses on measurements and dynamic modeling of the injector train. The program was sponsored by the US Department of Energy in support of advanced diesel engine technology. The injector train was instrumented to record the instantaneous roller speed, roller pin friction torque, pushrod force, injector link force and cam speed. These measurements, together with lift profiles for pushrod and injector link displacement, enabled the friction work loss in the injector train to be determined. Other significant design criteria suchmore » as camshaft roller follower slippage and maximum loads on components were also determined. Future efforts will concentrate on the dynamic model, with tests run as required for correlation.« less

The Effect of Increasing Mass upon Locomotion

NASA Technical Reports Server (NTRS)

DeWitt, John; Hagan, Donald

2007-01-01

The purpose of this investigation was to determine if increasing body mass while maintaining bodyweight would affect ground reaction forces and joint kinetics during walking and running. It was hypothesized that performing gait with increased mass while maintaining body weight would result in greater ground reaction forces, and would affect the net joint torques and work at the ankle, knee and hip when compared to gait with normal mass and bodyweight. Vertical ground reaction force was measured for ten subjects (5M/5F) during walking (1.34 m/s) and running (3.13 m/s) on a treadmill. Subjects completed one minute of locomotion at normal mass and bodyweight and at four added mass (AM) conditions (10%, 20%, 30% and 40% of body mass) in random order. Three-dimensional joint position data were collected via videography. Walking and running were analyzed separately. The addition of mass resulted in several effects. Peak impact forces and loading rates increased during walking, but decreased during running. Peak propulsive forces decreased during walking and did not change during running. Stride time increased and hip extensor angular impulse and positive work increased as mass was added for both styles of locomotion. Work increased at a greater rate during running than walking. The adaptations to additional mass that occur during walking are different than during running. Increasing mass during exercise in microgravity may be beneficial to increasing ground reaction forces during walking and strengthening hip musculature during both walking and running. Future study in true microgravity is required to determine if the adaptations found would be similar in a weightless environment.

Department of the Air Force. FY 1995 Budget Estimates. Military Construction and Family Housing

DTIC Science & Technology

1994-02-01

monorail lift systems and provide AFFF fire protection system, and elevators. Renovate engineering and work areas; provide new air make-up unit and...135,0U0 SY 1,200 880-212 AFFF FIRE SUPPRESSION SYSTEM LS 800 FOR FUEL CELL TOTAL: 10,450 9b. Future Projects: Typical Planned Next Three Years: 111...PROTECT 2 EA 3,600 PH II & AFFF PUMPS/RESERVOIR TOTAL: 27,900 9b. Future Projects: Typical Planned Next Three Years: 442-758 WAREHOUSE 107,000 SF

Comparison of measured and calculated forces on the RE-1000 free-piston Stirling engine displacer

NASA Technical Reports Server (NTRS)

Schreiber, Jeffrey G.

1987-01-01

The NASA Lewis Research Center has tested a 1 kW free-piston Stirling engine at the NASA Lewis test facilities. The tests performed over the past several years on the RE-1000 single cylinder engine are known as the sensitivity tests. This report presents an analysis of some of the data published in the sensitivity test report. A basic investigation into the measured forces acting on the unconstrained displacer of the engine is presented. These measured forces are then correlated with the values predicted by the NASA Lewis Stirling engine computer simulation. The results of the investigation are presented in the form of phasor diagrams. Possible future work resulting from this investigation is outlined.

Science and Sandy: Lessons Learned

NASA Astrophysics Data System (ADS)

Werner, K.

2013-12-01

Following Hurricane Sandy's impact on the mid-Atlantic region, President Obama established a Task Force to '...ensure that the Federal Government continues to provide appropriate resources to support affected State, local, and tribal communities to improve the region's resilience, health, and prosperity by building for the future.' The author was detailed from NOAA to the Task Force between January and June 2013. As the Task Force and others began to take stock of the region's needs and develop plans to address them, many diverse approaches emerged from different areas of expertise including: infrastructure, management and construction, housing, public health, and others. Decision making in this environment was complex with many interests and variables to consider and balance. Although often relevant, science and technical expertise was not always at the forefront of this process. This talk describes the author's experience with the Sandy Task Force focusing on organizing scientific expertise to support the work of the Task Force. This includes a description of federal activity supporting Sandy recovery efforts, the role of the Task Force, and lessons learned from developing a science support function within the Task Force.

Combined impacts of current and future dust deposition and regional warming on Colorado River Basin snow dynamics and hydrology

USGS Publications Warehouse

Deems, Jeffrey S.; Painter, Thomas H.; Barsugli, Joseph J.; Belnap, Jayne; Udall, Bradley

2013-01-01

The Colorado River provides water to 40 million people in seven western states and two countries and to 5.5 million irrigated acres. The river has long been overallocated. Climate models project runoff losses of 5–20% from the basin by mid-21st century due to human-induced climate change. Recent work has shown that decreased snow albedo from anthropogenic dust loading to the CO mountains shortens the duration of snow cover by several weeks relative to conditions prior to western expansion of the US in the mid-1800s, and advances peak runoff at Lees Ferry, Arizona, by an average of 3 weeks. Increases in evapotranspiration from earlier exposure of soils and germination of plants have been estimated to decrease annual runoff by more than 1.0 billion cubic meters, or ~5% of the annual average. This prior work was based on observed dust loadings during 2005–2008; however, 2009 and 2010 saw unprecedented levels of dust loading on snowpacks in the Upper Colorado River Basin (UCRB), being on the order of 5 times the 2005–2008 loading. Building on our prior work, we developed a new snow albedo decay parameterization based on observations in 2009/10 to mimic the radiative forcing of extreme dust deposition. We convolve low, moderate, and extreme dust/snow albedos with both historic climate forcing and two future climate scenarios via a delta method perturbation of historic records. Compared to moderate dust, extreme dust absorbs 2× to 4× the solar radiation, and shifts peak snowmelt an additional 3 weeks earlier to a total of 6 weeks earlier than pre-disturbance. The extreme dust scenario reduces annual flow volume an additional 1% (6% compared to pre-disturbance), a smaller difference than from low to moderate dust scenarios due to melt season shifting into a season of lower evaporative demand. The sensitivity of flow timing to dust radiative forcing of snow albedo is maintained under future climate scenarios, but the sensitivity of flow volume reductions decreases with increased climate forcing. These results have implications for water management and suggest that dust abatement efforts could be an important component of any climate adaptation strategies in the UCRB.

The United States Air Force Reserve Officer Training Corps: Looking to the Future

DTIC Science & Technology

1991-03-04

Brigadier General Robin G. Tornow Commandant, Air Force ROTC (Note 25) Over the years, Air Force ROTC has developed many strong points. Paramount among...maintaining a leaner and more capable force for the future. Brigadier General Robin G. Tornow Commandant, Air Force ROTC (Note 35) This alternative

Labor of love. A model for planning human resource needs.

PubMed

Brady, F J

1989-01-01

Typically, the annual budgeting process is the hospital's only attempt to forecast human resource requirements. In times of rapid change, this traditional ad hoc approach is incapable of satisfying either the Catholic hospital's ethical obligations as an employer or its responsibilities to provide healthcare to the poor and suffering. Assumptions about future activity, including volume projections on admissions, patient days, and other services, influence the budgeting process to a large degree. Because the amount of work to be done and the number of employees required to do it are related, changes in demand for service immediately and directly affect staffing requirements. A hospital cannot achieve ethical human resource management or provide high-quality healthcare if inadequate planning forces management into a cycle of crisis-coping--reacting to this year's nursing shortage with a major recruiting effort and next year's financial crunch with a traumatic reduction in force. The human resource planning approach outlined here helps the hospital meet legitimate business needs while satisfying its ethical obligations. The model has four phases and covers a charge to the planning committee; committee appointments; announcements; the establishment of ground rules, focus, and task forces; and the work of each task force.

Using FutureForce Nebraska to Shape Manufacturing Curriculum

ERIC Educational Resources Information Center

Glenn, Tony

2007-01-01

Nebraska, like most states in the U.S., is facing a critical shortage of skilled and employable workers. Business and industry want to grow in Nebraska and realize the road to ensuring success is a workforce possessing updated knowledge and skills that support the use of new technologies, as well as a necessary work ethic to be a dependable and…

Business and the Future of Education. Sequoia Action Brief #1.

ERIC Educational Resources Information Center

Hawkins, Robert B., Jr.

Many entry level employees do not have the skills to become productive members of the work force. The nationwide decline in educational performance is documented by functional illiteracy among 13 percent of white 17-year-olds, and 42 percent of black 17-year-olds; a decline in the national average scores on the Scholastic Aptitude Test (SAT); and…

The Discovery of the Future: The Ways Science Fiction Developed. Miscellaneous Publication 13.

ERIC Educational Resources Information Center

Gunn, James

This booklet discusses the development of science fiction, tracing its origins to the time of the industrial revolution. Many of the people of this time realized that life was changing and would continue to change, that there were new forces at work in the world, and that humankind should exercise some forethought about the direction in which…

Educational Needs, Aspirations, and Expectations for Young People in Michigan. Latinos in Michigan. LM-03

ERIC Educational Resources Information Center

Kayitsinga, Jean; Villarruel, Francisco A.; Tanner, Paul E., Jr.

2008-01-01

In today's changing economy and global competition, the demand for a better educated workforce has been increasing. Since the 1970's, new structures of work have emerged that require a highly skilled labor force. What do Michigan residents think about future educational needs of young people? What level of education do they expect their children…

Building the Stock of College-Educated Labor. NBER Working Paper No. 11604

ERIC Educational Resources Information Center

Dynarski, Susan

2005-01-01

Half of college students drop out before completing a degree. These low rates of college completion among young people should be viewed in the context of slow future growth in the educated labor force, as the well-educated baby boomers retire and new workers are drawn from populations with historically low education levels. This paper establishes…

America's Secret Educational Weapon: Community Colleges

ERIC Educational Resources Information Center

Magrath, C. Peter

2008-01-01

The U.S. has a powerful weapon in its educational arsenal: its community colleges. Yet these institutions, according to the author, are so often overlooked in discussions of the future of U.S. society and the U.S. work force that they might as well be deemed "top secret." More than 1,200 community colleges enroll some 47% of all undergraduates.…

Workforce Development: Building Statewide Systems. Issue Paper No. 2. Investing in People Project.

ERIC Educational Resources Information Center

McCarthy, Karin; Lashman, Rebekah

This report is the product of a project called Investing in People, in which the National Conference of Legislatures and Jobs for the Future helped five states as they tried to develop and implement work force preparation and training strategies to meet the challenge of a competitive global economy. The report is organized in six sections. The…

Building Bridges for Innovation in Ageing: Synergies between Action Groups of the EIP on AHA.

PubMed

Bousquet, J; Bewick, M; Cano, A; Eklund, P; Fico, G; Goswami, N; Guldemond, N A; Henderson, D; Hinkema, M J; Liotta, G; Mair, A; Molloy, W; Monaco, A; Monsonis-Paya, I; Nizinska, A; Papadopoulos, H; Pavlickova, A; Pecorelli, S; Prados-Torres, A; Roller-Wirnsberger, R E; Somekh, D; Vera-Muñoz, C; Visser, F; Farrell, J; Malva, J; Andersen Ranberg, K; Camuzat, T; Carriazo, A M; Crooks, G; Gutter, Z; Iaccarino, G; Manuel de Keenoy, E; Moda, G; Rodriguez-Mañas, L; Vontetsianos, T; Abreu, C; Alonso, J; Alonso-Bouzon, C; Ankri, J; Arredondo, M T; Avolio, F; Bedbrook, A; Białoszewski, A Z; Blain, H; Bourret, R; Cabrera-Umpierrez, M F; Catala, A; O'Caoimh, R; Cesari, M; Chavannes, N H; Correia-da-Sousa, J; Dedeu, T; Ferrando, M; Ferri, M; Fokkens, W J; Garcia-Lizana, F; Guérin, O; Hellings, P W; Haahtela, T; Illario, M; Inzerilli, M C; Lodrup Carlsen, K C; Kardas, P; Keil, T; Maggio, M; Mendez-Zorrilla, A; Menditto, E; Mercier, J; Michel, J P; Murray, R; Nogues, M; O'Byrne-Maguire, I; Pappa, D; Parent, A S; Pastorino, M; Robalo-Cordeiro, C; Samolinski, B; Siciliano, P; Teixeira, A M; Tsartara, S I; Valiulis, A; Vandenplas, O; Vasankari, T; Vellas, B; Vollenbroek-Hutten, M; Wickman, M; Yorgancioglu, A; Zuberbier, T; Barbagallo, M; Canonica, G W; Klimek, L; Maggi, S; Aberer, W; Akdis, C; Adcock, I M; Agache, I; Albera, C; Alonso-Trujillo, F; Angel Guarcia, M; Annesi-Maesano, I; Apostolo, J; Arshad, S H; Attalin, V; Avignon, A; Bachert, C; Baroni, I; Bel, E; Benson, M; Bescos, C; Blasi, F; Barbara, C; Bergmann, K C; Bernard, P L; Bonini, S; Bousquet, P J; Branchini, B; Brightling, C E; Bruguière, V; Bunu, C; Bush, A; Caimmi, D P; Calderon, M A; Canovas, G; Cardona, V; Carlsen, K H; Cesario, A; Chkhartishvili, E; Chiron, R; Chivato, T; Chung, K F; d'Angelantonio, M; De Carlo, G; Cholley, D; Chorin, F; Combe, B; Compas, B; Costa, D J; Costa, E; Coste, O; Coupet, A-L; Crepaldi, G; Custovic, A; Dahl, R; Dahlen, S E; Demoly, P; Devillier, P; Didier, A; Dinh-Xuan, A T; Djukanovic, R; Dokic, D; Du Toit, G; Dubakiene, R; Dupeyron, A; Emuzyte, R; Fiocchi, A; Wagner, A; Fletcher, M; Fonseca, J; Fougère, B; Gamkrelidze, A; Garces, G; Garcia-Aymeric, J; Garcia-Zapirain, B; Gemicioğlu, B; Gouder, C; Hellquist-Dahl, B; Hermosilla-Gimeno, I; Héve, D; Holland, C; Humbert, M; Hyland, M; Johnston, S L; Just, J; Jutel, M; Kaidashev, I P; Khaitov, M; Kalayci, O; Kalyoncu, A F; Keijser, W; Kerstjens, H; Knezović, J; Kowalski, M; Koppelman, G H; Kotska, T; Kovac, M; Kull, I; Kuna, P; Kvedariene, V; Lepore, V; MacNee, W; Maggio, M; Magnan, A; Majer, I; Manning, P; Marcucci, M; Marti, T; Masoli, M; Melen, E; Miculinic, N; Mihaltan, F; Milenkovic, B; Millot-Keurinck, J; Mlinarić, H; Momas, I; Montefort, S; Morais-Almeida, M; Moreno-Casbas, T; Mösges, R; Mullol, J; Nadif, R; Nalin, M; Navarro-Pardo, E; Nekam, K; Ninot, G; Paccard, D; Pais, S; Palummeri, E; Panzner, P; Papadopoulos, N K; Papanikolaou, C; Passalacqua, G; Pastor, E; Perrot, M; Plavec, D; Popov, T A; Postma, D S; Price, D; Raffort, N; Reuzeau, J C; Robine, J M; Rodenas, F; Robusto, F; Roche, N; Romano, A; Romano, V; Rosado-Pinto, J; Roubille, F; Ruiz, F; Ryan, D; Salcedo, T; Schmid-Grendelmeier, P; Schulz, H; Schunemann, H J; Serrano, E; Sheikh, A; Shields, M; Siafakas, N; Scichilone, N; Siciliano, P; Skrindo, I; Smit, H A; Sourdet, S; Sousa-Costa, E; Spranger, O; Sooronbaev, T; Sruk, V; Sterk, P J; Todo-Bom, A; Touchon, J; Tramontano, D; Triggiani, M; Tsartara, S I; Valero, A L; Valovirta, E; van Ganse, E; van Hage, M; van den Berge, M; Vandenplas, O; Ventura, M T; Vergara, I; Vezzani, G; Vidal, D; Viegi, G; Wagemann, M; Whalley, B; Wickman, M; Wilson, N; Yiallouros, P K; Žagar, M; Zaidi, A; Zidarn, M; Hoogerwerf, E J; Usero, J; Zuffada, R; Senn, A; de Oliveira-Alves, B

2017-01-01

The Strategic Implementation Plan of the European Innovation Partnership on Active and Healthy Ageing (EIP on AHA) proposed six Action Groups. After almost three years of activity, many achievements have been obtained through commitments or collaborative work of the Action Groups. However, they have often worked in silos and, consequently, synergies between Action Groups have been proposed to strengthen the triple win of the EIP on AHA. The paper presents the methodology and current status of the Task Force on EIP on AHA synergies. Synergies are in line with the Action Groups' new Renovated Action Plan (2016-2018) to ensure that their future objectives are coherent and fully connected. The outcomes and impact of synergies are using the Monitoring and Assessment Framework for the EIP on AHA (MAFEIP). Eight proposals for synergies have been approved by the Task Force: Five cross-cutting synergies which can be used for all current and future synergies as they consider overarching domains (appropriate polypharmacy, citizen empowerment, teaching and coaching on AHA, deployment of synergies to EU regions, Responsible Research and Innovation), and three cross-cutting synergies focussing on current Action Group activities (falls, frailty, integrated care and chronic respiratory diseases).

Plan for conducting an international machine tool task force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, G.P.; McClure, E.R.; Schuman, J.F.

1978-08-28

The basic objectives of the Machine Tool Task Force (MTTF) are to characterize and summarize the state of the art of cutting machine tool technology and to identify promising areas of future R and D. These goals will be accomplished with a series of multidisciplinary teams of prominent experts and individuals experienced in the specialized technologies of machine tools or in the management of machine tool operations. Experts will be drawn from all areas of the machine tool community: machine tool users or buyer organizations, builders, and R and D establishments including universities and government laboratories, both domestic and foreign.more » A plan for accomplishing this task is presented. The area of machine tool technology has been divided into about two dozen technology subjects on which teams of one or more experts will work. These teams are, in turn, organized into four principal working groups dealing, respectively, with machine tool accuracy, mechanics, control, and management systems/utilization. Details are presented on specific subjects to be covered, the organization of the Task Force and its four working groups, and the basic approach to determining the state of the art of technology and the future directions of this technology. The planned review procedure, the potential benefits, our management approach, and the schedule, as well as the key participating personnel and their background are discussed. The initial meeting of MTTF members will be held at a plenary session on October 16 and 17, 1978, in Scottsdale, AZ. The MTTF study will culminate in a conference on September 1, 1980, in Chicago, IL, immediately preceeding the 1980 International Machine Tool Show. At this time, our results will be released to the public; a series of reports will be published in late 1980.« less

Senior Leader Perspective on the Air Force Nuclear Enterprise: Todays Issues and the Future

DTIC Science & Technology

2016-09-15

SENIOR LEADER PERSPECTIVE ON THE AIR FORCE NUCLEAR ENTERPRISE: TODAY’S ISSUES AND THE FUTURE GRADUATE RESEARCH PAPER Matthew D. Boone...States. AFIT-ENS-MS-16-S-028 SENIOR LEADER PERSPECTIVE ON THE AIR FORCE NUCLEAR ENTERPRISE: TODAY’S ISSUES AND THE FUTURE GRADUATE... ISSUES AND THE FUTURE Matthew D. Boone, BS, MA Major, USAF Committee Membership: Robert E. Overstreet, Lt Col, USAF, PhD

A multi-scale ensemble-based framework for forecasting compound coastal-riverine flooding: The Hackensack-Passaic watershed and Newark Bay

NASA Astrophysics Data System (ADS)

Saleh, F.; Ramaswamy, V.; Wang, Y.; Georgas, N.; Blumberg, A.; Pullen, J.

2017-12-01

Estuarine regions can experience compound impacts from coastal storm surge and riverine flooding. The challenges in forecasting flooding in such areas are multi-faceted due to uncertainties associated with meteorological drivers and interactions between hydrological and coastal processes. The objective of this work is to evaluate how uncertainties from meteorological predictions propagate through an ensemble-based flood prediction framework and translate into uncertainties in simulated inundation extents. A multi-scale framework, consisting of hydrologic, coastal and hydrodynamic models, was used to simulate two extreme flood events at the confluence of the Passaic and Hackensack rivers and Newark Bay. The events were Hurricane Irene (2011), a combination of inland flooding and coastal storm surge, and Hurricane Sandy (2012) where coastal storm surge was the dominant component. The hydrodynamic component of the framework was first forced with measured streamflow and ocean water level data to establish baseline inundation extents with the best available forcing data. The coastal and hydrologic models were then forced with meteorological predictions from 21 ensemble members of the Global Ensemble Forecast System (GEFS) to retrospectively represent potential future conditions up to 96 hours prior to the events. Inundation extents produced by the hydrodynamic model, forced with the 95th percentile of the ensemble-based coastal and hydrologic boundary conditions, were in good agreement with baseline conditions for both events. The USGS reanalysis of Hurricane Sandy inundation extents was encapsulated between the 50th and 95th percentile of the forecasted inundation extents, and that of Hurricane Irene was similar but with caveats associated with data availability and reliability. This work highlights the importance of accounting for meteorological uncertainty to represent a range of possible future inundation extents at high resolution (∼m).

Reproducing Quantum Probability Distributions at the Speed of Classical Dynamics: A New Approach for Developing Force-Field Functors.

PubMed

Sundar, Vikram; Gelbwaser-Klimovsky, David; Aspuru-Guzik, Alán

2018-04-05

Modeling nuclear quantum effects is required for accurate molecular dynamics (MD) simulations of molecules. The community has paid special attention to water and other biomolecules that show hydrogen bonding. Standard methods of modeling nuclear quantum effects like Ring Polymer Molecular Dynamics (RPMD) are computationally costlier than running classical trajectories. A force-field functor (FFF) is an alternative method that computes an effective force field that replicates quantum properties of the original force field. In this work, we propose an efficient method of computing FFF using the Wigner-Kirkwood expansion. As a test case, we calculate a range of thermodynamic properties of Neon, obtaining the same level of accuracy as RPMD, but with the shorter runtime of classical simulations. By modifying existing MD programs, the proposed method could be used in the future to increase the efficiency and accuracy of MD simulations involving water and proteins.

Recommendations of the wwPDB NMR Validation Task Force

PubMed Central

Montelione, Gaetano T.; Nilges, Michael; Bax, Ad; Güntert, Peter; Herrmann, Torsten; Richardson, Jane S.; Schwieters, Charles; Vranken, Wim F.; Vuister, Geerten W.; Wishart, David S.; Berman, Helen M.; Kleywegt, Gerard J.; Markley, John L.

2013-01-01

As methods for analysis of biomolecular structure and dynamics using nuclear magnetic resonance spectroscopy (NMR) continue to advance, the resulting 3D structures, chemical shifts, and other NMR data are broadly impacting biology, chemistry, and medicine. Structure model assessment is a critical area of NMR methods development, and is an essential component of the process of making these structures accessible and useful to the wider scientific community. For these reasons, the Worldwide Protein Data Bank (wwPDB) has convened an NMR Validation Task Force (NMR-VTF) to work with the wwPDB partners in developing metrics and policies for biomolecular NMR data harvesting, structure representation, and structure quality assessment. This paper summarizes the recommendations of the NMR-VTF, and lays the groundwork for future work in developing standards and metrics for biomolecular NMR structure quality assessment. PMID:24010715

Introduction to the IEEE International Symposium on Applications of Ferroelectrics and International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials.

PubMed

Ye, Zuo-Guang; Tan, Xiaoli; Bokov, Alexei A

2012-09-01

The 20th IEEE International Symposium on Applications of Ferroelectrics (ISAF) was held on July 24-27, 2011, in Vancouver, British Columbia, Canada, jointly with the International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials (PFM). Over a period of four days, approximately 400 scientists, engineers, and students from around the world presented their work and discussed the latest developments in the field of ferroelectrics, related materials, and their applications. It is particularly encouraging to see that a large number of students (115) were attracted to the joint conference and presented high-quality research works. This trend is not only important to this conference series, but more importantly, it is vital to the future of the ferroelectrics field.

Can feedback analysis be used to uncover the physical origin of climate sensitivity and efficacy differences?

NASA Astrophysics Data System (ADS)

Rieger, Vanessa S.; Dietmüller, Simone; Ponater, Michael

2017-10-01

Different strengths and types of radiative forcings cause variations in the climate sensitivities and efficacies. To relate these changes to their physical origin, this study tests whether a feedback analysis is a suitable approach. For this end, we apply the partial radiative perturbation method. Combining the forward and backward calculation turns out to be indispensable to ensure the additivity of feedbacks and to yield a closed forcing-feedback-balance at top of the atmosphere. For a set of CO2-forced simulations, the climate sensitivity changes with increasing forcing. The albedo, cloud and combined water vapour and lapse rate feedback are found to be responsible for the variations in the climate sensitivity. An O3-forced simulation (induced by enhanced NOx and CO surface emissions) causes a smaller efficacy than a CO2-forced simulation with a similar magnitude of forcing. We find that the Planck, albedo and most likely the cloud feedback are responsible for this effect. Reducing the radiative forcing impedes the statistical separability of feedbacks. We additionally discuss formal inconsistencies between the common ways of comparing climate sensitivities and feedbacks. Moreover, methodical recommendations for future work are given.

Global mega forces: Implications for the future of natural resources

Treesearch

George H. Kubik

2012-01-01

The purpose of this paper is to provide an overview of leading global mega forces and their importance to the future of natural resource decisionmaking, policy development, and operation. Global mega forces are defined as a combination of major trends, preferences, and probabilities that come together to produce the potential for future high-impact outcomes. These...

A qualitative and quantitative survey of Forensic Medical Examiner workload in the Northumbria Police Force area October 2002-January 2003.

PubMed

Roberts, Geoffrey; Roberts, John; Patton, Hugh Fergus; Patton, Michelle; Megson, Kenneth; Murphy, Rob

2006-01-01

This force-wide study in the Northumbria Police area provides an audit of the quality and quantity of work carried out by Forensic Medical Examiners (FMEs) over a three month period. Approximately 25% of all arrests during the period of the audit resulted in a request for FME assessment of the detainee. About 79% of consultations were performed to establish fitness to detain, in which over 30% of detainees were intoxicated and over 40% addicted to drugs and/or alcohol. Over 30% of those queried for fitness to detain also required advice and occasionally prescription for medication, both for the management of addiction and the treatment of chronic illness. In comparison to prior work this study found lower rates of mental illness in alcohol and drug dependent populations (13% and 6%, respectively). It is hoped this study will provide information in respect of the specific competencies not only required by future FMEs but also nurses working with detainees within the custody suites.

[Perspectives of work, age, health, and labor market participation in Germany].

PubMed

Hasselhorn, H M; Rauch, A

2013-03-01

The German population is aging and shrinking. This will have a significant impact on the labor market, because labor supply will start to shrink. Consequently, there is a need to develop additional labor market resources. In this setting, a crucial issue is the health and employment of the older working population. This article discusses--on the basis of nine articles in this special issue--the health of the working population in the context of work, age, and labor participation. It shows the diversity of morbidity in the work force in general and particularly in older age, and it identifies older labor force groups with good health and those with bad health. The latter shows that "working while having a bad state of health" is today's reality. Labor market participation is less dependent on health than on the "work ability" and/or the "motivation to work" of older workers. The employment dynamics of an aging population will be a key issue in future political debate. A reliable knowledge base is needed for proper discussion, judgment, and action in the economic, political, and social fields. Current research is often focused on subtopics or on subgroups; however, a network of all the related scientific disciplines and the establishment of new comprehensive research approaches are needed in this area.

Objective Force Disciplines: Making Army Transformation a Reality

DTIC Science & Technology

2002-05-01

Managing Oneself ” as it relates to “knowledge workers” and the new demands of the individual within an organization.30 Drucker goes on by identifying...necessary for organizations to succeed in the future. In his recent work, Management Challenges for the 21st Century, Drucker describes the concept of...experience, 29 Senge, The Fifth Discipline, p. 141. 30 Drucker , Peter F., Management Challenges for the

Pathfinder. Volume 9, Number 1, January/February 2011

DTIC Science & Technology

2011-02-01

that users can access global foundation, imagery, product and activity layers online whenever and wherever they need to, much the way we access data...Professional Development Strengthening mission performance starts with an expert, diverse and collaborative global work force that rapidly shifts and...universities. The RAND study addressed two broad ques- tions: How future global development and trends result in new operational demands being placed on

Future Of Privatized Warfare

DTIC Science & Technology

2016-05-26

5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Eric M. Peterson, Major, U.S. Air Force 5d. PROJECT NUMBER 5e. TASK NUMBER...Henry A. Arnold III, COL, IN Accepted this 26th day of May 2016 by: ___________________________________, Director, Graduate Degree Programs Robert...determination or copyright permission has been obtained for the inclusion of pictures, maps, graphics, and any other works incorporated into this

University Government in Nazi Germany: The Example of Hamburg. Yale Higher Education Program Working Paper.

ERIC Educational Resources Information Center

Giles, Geoffrey J.

Many apologies have been made for the part the German universities played in the Third Reich. The general stigma of having failed the people as intellectual leaders clung to the German academics for a long time. Their contention of helplessness before the forces of National Socialism gave rise to fears of similar weakness in the future. Although…

Information and Communication Technology to Facilitate Learning for Students in the Health Professions: Current Uses, Gaps, and Future Directions

ERIC Educational Resources Information Center

Costello, Ellen; Corcoran, Mary; Barnett, Jacqueline S.; Birkmeier, Marisa; Cohn, Rhea; Ekmekci, Ozgur; Falk, Nancy L.; Harrod, Thomas; Herrmann, Debra; Robinson, Sean; Walker, Bryan

2014-01-01

Changes in the U.S. Healthcare System along with the need for institutions of higher education to prepare a work force ready to address the challenges of today and tomorrow have highlighted the need to incorporate technology in its broadest sense as part of the student learning experience. In health professional education, this becomes challenging…

Residential Segregation by Race in U.S. Metropolitan Areas: An Analysis Across Cities and Over Time.

ERIC Educational Resources Information Center

Schnare, Ann B.

There is a need to understand more clearly the forces that work to generate and maintain a segregated housing market. There is also a need to formulate statistical measures of segregation, so that developments in future years can be assessed against the past. This report was designed with these two objectives in mind. The analysis is primarily…

Army Contracting Command Workforce Model Analysis

DTIC Science & Technology

2012-02-09

Empresas in Madrid. His Air Force contracting experience includes F-22 Fighter, C-17 Cargo Transport , and a contingency deployment as director of Joint...and the University of Maryland (University College). He has also conducted visiting seminars at American University in Cairo and Instituto de ...the long total process times that are sometimes involved in weapon system contracting, such an assessment may equate to a de facto future work

A Correction Equation for Jump Height Measured Using the Just Jump System.

PubMed

McMahon, John J; Jones, Paul A; Comfort, Paul

2016-05-01

To determine the concurrent validity and reliability of the popular Just Jump system (JJS) for determining jump height and, if necessary, provide a correction equation for future reference. Eighteen male college athletes performed 3 bilateral countermovement jumps (CMJs) on 2 JJSs (alternative method) that were placed on top of a force platform (criterion method). Two JJSs were used to establish consistency between systems. Jump height was calculated from flight time obtained from the JJS and force platform. Intraclass correlation coefficients (ICCs) demonstrated excellent within-session reliability of the CMJ height measurement derived from both the JJS (ICC = .96, P < .001) and the force platform (ICC = .96, P < .001). Dependent t tests revealed that the JJS yielded a significantly greater CMJ jump height (0.46 ± 0.09 m vs 0.33 ± 0.08 m) than the force platform (P < .001, Cohen d = 1.39, power = 1.00). There was, however, an excellent relationship between CMJ heights derived from the JJS and force platform (r = .998, P < .001, power = 1.00), with a coefficient of determination (R2) of .995. Therefore, the following correction equation was produced: Criterion jump height = (0.8747 × alternative jump height) - 0.0666. The JJS provides a reliable but overestimated measure of jump height. It is suggested, therefore, that practitioners who use the JJS as part of future work apply the correction equation presented in this study to resultant jump-height values.

Intensified ENSO-Driven Precipitation Teleconnections in the Future

NASA Astrophysics Data System (ADS)

Bonfils, C.; Santer, B. D.; Phillips, T. J.; Marvel, K.; Leung, L. R.; Doutriaux, C.

2014-12-01

The El Niño-Southern Oscillation (ENSO) is an important driver of regional hydroclimate variability through far-reaching teleconnections. Most climate models project an increase in the frequency of extreme El Niño events under increased greenhouse-gas (GHG) forcing. However, it is unclear how other aspects of ENSO and ENSO-driven teleconnections will evolve in the future. Here, we identify in 20th century sea-surface temperature (SST) observations a time-invariant ENSO-like (ENSOL) pattern that is largely uncontaminated by GHG forcing. We use this pattern to investigate the future precipitation (P) response to ENSO-like SST anomalies. Models that better capture observed ENSOL characteristics produce P teleconnection patterns that are in better accord with observations and more stationary in the 21st century. We decompose the future P response to ENSOL into the sum of three terms: (1) the change in P mean state, (2) the historical P response to ENSOL, and (3) a future enhancement in the P response to ENSOL. In many regions, this last term can aggravate the P extremes associated with ENSO variability. This simple decomposition allows us to identify regions likely to experience ENSOL-induced P changes that are without precedent in the current climate. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Technology and the Future of Healthcare

PubMed Central

Thimbleby, Harold

2013-01-01

Healthcare changes dramatically because of technological developments, from anesthetics and antibiotics to magnetic resonance imaging scanners and radiotherapy. Future technological innovation is going to keep transforming healthcare, yet while technologies (new drugs and treatments, new devices, new social media support for healthcare, etc) will drive innovation, human factors will remain one of the stable limitations of breakthroughs. No predictions can satisfy everybody; instead, this article explores fragments of the future to see how to think more clearly about how to get where we want to go. Significance for public health Technology drives healthcare more than any other force, and in the future it will continue to develop in dramatic ways. While we can glimpse and debate the details of future trends in healthcare, we need to be clear about the drivers so we can align with them and actively work to ensure the best outcomes for society as a whole. PMID:25170499

Force Structure: Better Information Needed to Support Air Force A-10 and Other Future Divestment Decisions

DTIC Science & Technology

2016-08-01

estimate should have a standardized structure that breaks costs into discrete elements with sufficient detail to ensure that cost elements are...FORCE STRUCTURE Better Information Needed to Support Air Force A-10 and Other Future Divestment Decisions Report...Accountability Office Highlights of GAO-16-816, a report to congressional committees August 2016 FORCE STRUCTURE Better Information Needed to Support

Agricultural work exposures and pulmonary function among hired farm workers in California (the MICASA study).

PubMed

Rodriquez, Erik J; Stoecklin-Marois, Maria T; Bennett, Deborah H; Tancredi, Daniel J; Schenker, Marc B

2014-01-01

Despite California's dependence on hired farm labor, scarce research has been conducted on the respiratory health of hired farm workers. Agricultural exposures to inorganic and organic dusts can adversely affect an individual's respiratory health and differ by farm type and job task. The purpose of the present analysis was to examine associations between agricultural work exposures and pulmonary function among 450 California farm workers. Data were collected as part of the Mexican Immigration to California: Agricultural Safety and Acculturation (MICASA) study, a prospective cohort study examining occupational risk factors and health of hired farm worker families in Mendota, California. Time-weighted self-reported average (TWSRA) dust scores were calculated from assessments of past-12-month agricultural work history. Other dust exposure indicator variables included months worked in agriculture in the past 12 months and years worked in agriculture. Multiple linear regression modeled FEV1 (forced expiratory volume in 1 second), FEF(25-75%) (forced midexpiratory flow rate), FVC (forced vital capacity), FEV6, FEV1/FVC, and FEV1/FEV6 separately. Seventy-six percent of participants had worked in agriculture in the past year. In models conducted for crops and tasks separately, high TWSRA dust score was associated with better FEV6. Crop and task models showed associations between greater months worked in agriculture in the past year and better FEV1, FEF(25-75%), and FEV6. Both models also found greater years worked in agriculture to be associated with worse FEV1/FEV6. Results were generally in the opposite direction as expected given past research but not uncommon. Future research should investigate relationships between pulmonary function and agricultural dust exposure over a lifetime and changes in pulmonary function over time.

The Relative Contribution of Ankle Moment and Trailing Limb Angle to Propulsive Force during Gait

PubMed Central

Hsiao, HaoYuan; Knarr, Brian A.; Higginson, Jill S.; Binder-Macleod, Stuart A.

2014-01-01

A major factor for increasing walking speed is the ability to increase propulsive force. Although propulsive force has been shown to be related to ankle moment and trailing limb angle, the relative contribution of each factor to propulsive force has never been determined. The primary purpose of this study was to quantify the relative contribution of ankle moment and trailing limb angle to propulsive force for able-bodied individuals walking at different speeds. Twenty able-bodied individuals walked at their self-selected and 120% of self-selected walking speed on the treadmill. Kinematic data were collected using an 8-camera motion-capture system. A model describing the relationship between ankle moment, trailing limb angle and propulsive force was obtained through quasi-static analysis. Our main findings were that ankle moment and trailing limb angle each contributes linearly to propulsive force, and that the change in trailing limb angle contributes almost as twice as much as the change in ankle moment to the increase in propulsive force during speed modulation for able-bodied individuals. Able-bodied individuals preferentially modulate trailing limb angle more than ankle moment to increase propulsive force. Future work will determine if this control strategy can be applied to individuals poststroke. PMID:25498289

Vibration control by limiting the maximum axial forces in space trusses

NASA Technical Reports Server (NTRS)

Chawla, Vikas; Utku, Senol; Wada, Ben K.

1993-01-01

Proposed here is a method of vibration control based on limiting the maximum axial forces in the active members of an adaptive truss. The actuators simulate elastic rigid-plastic behavior and consume the vibrational energy as work. The method is applicable to both statically determinate as well as indeterminate truss structures. However, for energy efficient control of statistically indeterminate trusses extra actuators may be provided on the redundant bars. An energy formulation relating the various control parameters is derived to get an estimate of the control time. Since the simulation of elastic rigid-plastic behavior requires a piecewise linear control law, a general analytical solution is not possible. Numerical simulation by step-by-step integration is performed to simulate the control of an example truss structure. The problems of application to statically indeterminate trusses and optimal actuator placement are identified for future work.

Multi-scale mechanics of granular solids from grain-resolved X-ray measurements

NASA Astrophysics Data System (ADS)

Hurley, R. C.; Hall, S. A.; Wright, J. P.

2017-11-01

This work discusses an experimental technique for studying the mechanics of three-dimensional (3D) granular solids. The approach combines 3D X-ray diffraction and X-ray computed tomography to measure grain-resolved strains, kinematics and contact fabric in the bulk of a granular solid, from which continuum strains, grain stresses, interparticle forces and coarse-grained elasto-plastic moduli can be determined. We demonstrate the experimental approach and analysis of selected results on a sample of 1099 stiff, frictional grains undergoing multiple uniaxial compression cycles. We investigate the inter-particle force network, elasto-plastic moduli and associated length scales, reversibility of mechanical responses during cyclic loading, the statistics of microscopic responses and microstructure-property relationships. This work serves to highlight both the fundamental insight into granular mechanics that is furnished by combined X-ray measurements and describes future directions in the field of granular materials that can be pursued with such approaches.

Varying the forcing scale in low Prandtl number dynamos

NASA Astrophysics Data System (ADS)

Brandenburg, A.; Haugen, N. E. L.; Li, Xiang-Yu; Subramanian, K.

2018-06-01

Small-scale dynamos are expected to operate in all astrophysical fluids that are turbulent and electrically conducting, for example the interstellar medium, stellar interiors, and accretion disks, where they may also be affected by or competing with large-scale dynamos. However, the possibility of small-scale dynamos being excited at small and intermediate ratios of viscosity to magnetic diffusivity (the magnetic Prandtl number) has been debated, and the possibility of them depending on the large-scale forcing wavenumber has been raised. Here we show, using four values of the forcing wavenumber, that the small-scale dynamo does not depend on the scale-separation between the size of the simulation domain and the integral scale of the turbulence, i.e., the forcing scale. Moreover, the spectral bottleneck in turbulence, which has been implied as being responsible for raising the excitation conditions of small-scale dynamos, is found to be invariant under changing the forcing wavenumber. However, when forcing at the lowest few wavenumbers, the effective forcing wavenumber that enters in the definition of the magnetic Reynolds number is found to be about twice the minimum wavenumber of the domain. Our work is relevant to future studies of small-scale dynamos, of which several applications are being discussed.

Effects of Type and Strength of Force Feedback on Movement Time in a Target Selection Task

NASA Technical Reports Server (NTRS)

Rorie, Robert Conrad; Vu, Kim-Phuong L.; Marayong, Panadda; Robles, Jose; Strybel, Thomas Z.; Battiste, Vernol

2013-01-01

Future cockpits will likely include new onboard technologies, such as cockpit displays of traffic information, to help support future flight deck roles and responsibilities. These new technologies may benefit from multimodal feedback to aid pilot information processing. The current study investigated the effects of multiple levels of force feedback on operator performance in an aviation task. Participants were presented with two different types of force feedback (gravitational and spring force feedback) for a discrete targeting task, with multiple levels of gain examined for each force feedback type. Approach time and time in target were recorded. Results suggested that the two highest levels of gravitational force significantly reduced approach times relative to the lowest level of gravitational force. Spring force level only affected time in target. Implications of these findings for the design of future cockpit displays will be discussed.

Numerical Exact Ab Initio Four-Nucleon Scattering Calculations: from Dream to Reality

NASA Astrophysics Data System (ADS)

Fonseca, A. C.; Deltuva, A.

2017-03-01

In the present manuscript we review the work of the last ten years on the pursuit to obtain numerical exact solutions of the four-nucleon scattering problem using the most advanced force models that fit two nucleon data up to pion production threshold with a χ ^2 per data point approximately one, together with the Coulomb interaction between protons; three- and four-nucleon forces are also included in the framework of a meson exchange potential model where NN couples to NΔ. Failure to describe the world data on four-nucleon scattering observables in the framework of a non relativistic scattering approach falls necessarily on the force models one uses. Four-nucleon observables pose very clear challenges, particular in the low energy region where there are a number of resonances whose position and width needs to be dynamically generated by the nucleon-nucleon (NN) interactions one uses. In addition, our calculations constitute the most advance piece of work where observables for all four-nucleon reactions involving isospin I=0, I=0 coupled to I=1 and isospin I=1 initial states are calculated at energies both below and above breakup threshold. We also present a very extensive comparison between calculated results and data for cross sections and spin observables. Therefore the present work reveals both the shortcomings and successes of some of the present NN force models in describing four-nucleon data and serve as a benchmark for future developments.

Sensitivity of Hydrologic Extremes to Spatial Resolution of Meteorological Forcings: A Case Study of the Conterminous United States

NASA Astrophysics Data System (ADS)

Kao, S. C.; Naz, B. S.; Gangrade, S.; Ashfaq, M.; Rastogi, D.

2016-12-01

The magnitude and frequency of hydroclimate extremes are projected to increase in the conterminous United States (CONUS) with significant implications for future water resource planning and flood risk management. Nevertheless, apart from the change of natural environment, the choice of model spatial resolution could also artificially influence the features of simulated extremes. To better understand how the spatial resolution of meteorological forcings may affect hydroclimate projections, we test the runoff sensitivity using the Variable Infiltration Capacity (VIC) model that was calibrated for each CONUS 8-digit hydrologic unit (HUC8) at 1/24° ( 4km) grid resolution. The 1980-2012 gridded Daymet and PRISM meteorological observations are used to conduct the 1/24° resolution control simulation. Comparative simulations are achieved by smoothing the 1/24° forcing into 1/12° and 1/8° resolutions which are then used to drive the VIC model for the CONUS. In addition, we also test how the simulated high and low runoff conditions would react to change in precipitation (±10%) and temperature (+1°C). The results are further analyzed for various types of hydroclimate extremes across different watersheds in the CONUS. This work helps us understand the sensitivity of simulated runoff to different spatial resolutions of climate forcings and also its sensitivity to different watershed sizes and characteristics of extreme events in the future climate conditions.

Micromanipulation and microfabrication for optical microrobotics

NASA Astrophysics Data System (ADS)

Palima, Darwin; Bañas, Andrew Rafael; Vizsnyiczai, Gaszton; Kelemen, Lóránd; Aabo, Thomas; Ormos, Pál.; Glückstad, Jesper

2012-10-01

Robotics can use optics feedback in vision-based control of intelligent robotic guidance systems. With light's miniscule momentum, shrinking robots down to the microscale regime creates opportunities for exploiting optical forces and torques in microrobotic actuation and control. Indeed, the literature on optical trapping and micromanipulation attests to the possibilities for optical microrobotics. This work presents an optical microrobotics perspective on the optical microfabrication and micromanipulation work that we performed. We designed different three-dimensional microstructures and fabricated them by two-photon polymerization. These microstructures were then handled using our biophotonics workstation (BWS) for proof-of-principle demonstrations of optical actuation, akin to 6DOF actuation of robotic micromanipulators. Furthermore, we also show an example of dynamic behavior of the trapped microstructure that can be achieved when using static traps in the BWS. This can be generalized, in the future, towards a structural shaping optimization strategy for optimally controlling microstructures to complement approaches based on lightshaping. We also show that light channeled to microfabricated, free-standing waveguides can be used not only to redirect light for targeted delivery of optical energy but can also for targeted delivery of optical force, which can serve to further extend the manipulation arms in optical robotics. Moreover, light deflection with waveguide also creates a recoil force on the waveguide, which can be exploited for controlling the optical force.

Running on Empty: The Development of Helicopter Aerial Refueling and Implications for Future USAF Combat Rescue Capabilities

DTIC Science & Technology

1997-03-01

Haiti, Somalia, Liberia, and Bosnia. The future appears very busy for Air Force rescue units as well. According to ?Strategic Assessment 1996?Instruments...13 COMTEMPORARY ROLE OF AIR REFUELING IN US AIR FORCE SEARCH AND RESCUE...places such as Haiti, Somalia, Liberia, and Bosnia. The future appears very busy for Air Force rescue units as well. According to “Strategic Assessment

Army Warfighter Information NetworkTactical Increment 2 Procurement Quantity Not Supported for Future Army Forces (REDACTED)

DTIC Science & Technology

2016-03-01

organization, working together as one professional team, recognized as leaders in our field. For more information about whistleblower protection, please...USE ONLY FOR OFFICIAL USE ONLY Whistleblower Protection U.S. Department of Defense The Whistleblower Protection Enhancement Act of 2012 requires the...Inspector General to designate a Whistleblower Protection Ombudsman to educate agency employees about prohibitions on retaliation, and rights and

Land Combat Systems

DTIC Science & Technology

2002-01-01

systems many key automation and robotic technologies necessary for the autonomous operations desired of future systems. GDLS is in charge of the AAAV...TITLE AND SUBTITLE 2002 Industry Studies: Land Combat Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6 . AUTHOR(S) 5d...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) The Industrial College of the Armed Forces

Annual Report to the President and the Congress

DTIC Science & Technology

1993-01-01

Cold War, when any crisis might have raised the possibility of immediate, global conflict with a heavily-armed adversary. In contrast, today’s...continue to be an important factor in inducing nations to work together to cope with crisis and to resist or defeat aggression. A general interest in...deterrence and defense, for- ward presence, crisis response, and reconstitution. These elements guide the plans for our future force posture and

Meeting Competence Needs in the Hotel and Catering Industry Now and in the Future. Research Report 1992.

ERIC Educational Resources Information Center

Walker, Anne, Ed.; Hayter, Roy, Ed.

The hotel and catering industry in the United Kingdom is estimated to have employed 2,392,000 people in 1990--about 9 percent of the total work force in employment in the country. These figures came from a major study into the skills needs of the hotel and catering industry in relation to the current provision of vocational education. Data are…

Future Job Openings: Australia in the Knowledge Economy. Project 2000-02: Changing Skill Requirements in the Australian Labour Force in a Knowledge Economy. Working Paper.

ERIC Educational Resources Information Center

Shah, Chandra; Burke, Gerald

Forecasts of Australian labor market growth, net replacement needs, and net job openings to 2006 are presented using the nine-way grouping of occupations described by (Maglen and Shah, 1999). Analysis is based on classifying occupations by whether they are advantaged by globalization and technological change, relatively insulated, or vulnerable.…

Fundamental dynamics: Past, present and the future — like CP violation and EDMs

NASA Astrophysics Data System (ADS)

Bigi, Ikaros I.

2015-04-01

Working with Kolya Uraltsev was a real 'marvel' for me in general, but in particular about CP and T violation, QCD and its impact on transitions in heavy flavor hadrons and EDMs. The goal was — and still is — to define fundamental parameters for dynamics, how to measure them and compare SM forces with New Dynamics using the best tools including our brains. The correlations of them with accurate data were crucial for Kolya. Here is a review of CP asymmetries in B, D and τ decays, the impact of perturbative and non-perturbative QCD, about EDMs till 2013 — and for the future.

Force-detected nuclear magnetic resonance: recent advances and future challenges.

PubMed

Poggio, M; Degen, C L

2010-08-27

We review recent efforts to detect small numbers of nuclear spins using magnetic resonance force microscopy. Magnetic resonance force microscopy (MRFM) is a scanning probe technique that relies on the mechanical measurement of the weak magnetic force between a microscopic magnet and the magnetic moments in a sample. Spurred by the recent progress in fabricating ultrasensitive force detectors, MRFM has rapidly improved its capability over the last decade. Today it boasts a spin sensitivity that surpasses conventional, inductive nuclear magnetic resonance detectors by about eight orders of magnitude. In this review we touch on the origins of this technique and focus on its recent application to nanoscale nuclear spin ensembles, in particular on the imaging of nanoscale objects with a three-dimensional (3D) spatial resolution better than 10 nm. We consider the experimental advances driving this work and highlight the underlying physical principles and limitations of the method. Finally, we discuss the challenges that must be met in order to advance the technique towards single nuclear spin sensitivity-and perhaps-to 3D microscopy of molecules with atomic resolution.

Imaging and Force Recognition of Single Molecular Behaviors Using Atomic Force Microscopy

PubMed Central

Li, Mi; Dang, Dan; Liu, Lianqing; Xi, Ning; Wang, Yuechao

2017-01-01

The advent of atomic force microscopy (AFM) has provided a powerful tool for investigating the behaviors of single native biological molecules under physiological conditions. AFM can not only image the conformational changes of single biological molecules at work with sub-nanometer resolution, but also sense the specific interactions of individual molecular pair with piconewton force sensitivity. In the past decade, the performance of AFM has been greatly improved, which makes it widely used in biology to address diverse biomedical issues. Characterizing the behaviors of single molecules by AFM provides considerable novel insights into the underlying mechanisms guiding life activities, contributing much to cell and molecular biology. In this article, we review the recent developments of AFM studies in single-molecule assay. The related techniques involved in AFM single-molecule assay were firstly presented, and then the progress in several aspects (including molecular imaging, molecular mechanics, molecular recognition, and molecular activities on cell surface) was summarized. The challenges and future directions were also discussed. PMID:28117741

Life on streets.

PubMed

Tiwari, Poornima

2007-03-01

Millions of children leave home in hope of finding a more tolerable life. The study tries to find out the kind of life they lead once out on the streets. Cross-sectional study of all street boys admitted to a Child Observation Home in New Delhi during specified 6 months. Questions regarding various aspects of survival on streets were asked. Majority are forced to work in informal sector for survival with earnings well below the minimum wages. To escape from the exploitation and hardships, many begin abusing substances. The street experience leads to hopelessness for the future and suicidal tendencies. After circumstances at home force these kids to escape, they are caught up in yet another world of exploitation, hunger, violence and abuse.

Report of Combat Consumption Modeling Improvement Panel.

DTIC Science & Technology

1980-07-01

within a static frame- work , and so may require the use of a dynamic approach. 5. Navy Methodologies ( Less Risk) Like the Air Force, the Navy uses a...mda~id iw Cumr MOAN3 70 C 620 Ib9 Umplmmut d6 Um. IN PWmAN d WM A PaW dme adn hiSses by Onbs ds dmu~m. p.1Mm d6 tga agmey. UNCLASSIFIED lecumV...by ,the panel to be important, in detail. In many areas, the panel believes that the caveats and recommendations for future work presented In the DoD

The Labor Shortage--Poverty and Educational Aspects. Hearings on Examining Alternatives Available in Coping with a Projected Labor Shortage in the Future while Facing a Poverty Surplus and Educational Gaps in the Work Force before the Committee on Labor and Human Resources. United States Senate, One Hundred First Congress, First Session (January 26 and 27, 1989).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Labor and Human Resources.

This document comprises hearings on the poverty and educational aspects of the labor shortage. Twenty witnesses testified, including Secretary of the U.S. Department of Labor Elizabeth Dole, Secretary of the U.S. Department of Education Lauro F. Cavazos, legislators, program administrators, and three working mothers. Testimony included the…

Strategic Planning for the Air Force. Leveraging Business Planning Insights to Create Future Value

DTIC Science & Technology

1998-01-01

Strategic Planning for the Air Force Leveraging Business Planning Insights to Create Future Value DEBORAH L. WESTPHAL, RICHARD SZAFRANSKI...SUBTITLE Strategic Planning for the Air Force. Leveraging Business Planning Insights to Create Future Value 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...can be so, unless leaders and planners are willing to think in the boundary between order and chaos. Long-Range Planning, Strategic Thinking, or

Communicating with New and Existing Markets. A Task Force of Howard Community College's 1998-1999 Commission on the Future.

ERIC Educational Resources Information Center

Howard Community Coll., Columbia, MD.

This is a report from a task force formed by Howard Community College (Maryland) to examine existing and future markets. The task force also explored ways to use marketing strategies to attract potential customers to the college. The task force recommends that the college use its strengths to attract customers, such as its commitment to open…

Wind energy resource modelling in Portugal and its future large-scale alteration due to anthropogenic induced climate changes =

NASA Astrophysics Data System (ADS)

Carvalho, David Joao da Silva

The high dependence of Portugal from foreign energy sources (mainly fossil fuels), together with the international commitments assumed by Portugal and the national strategy in terms of energy policy, as well as resources sustainability and climate change issues, inevitably force Portugal to invest in its energetic self-sufficiency. The 20/20/20 Strategy defined by the European Union defines that in 2020 60% of the total electricity consumption must come from renewable energy sources. Wind energy is currently a major source of electricity generation in Portugal, producing about 23% of the national total electricity consumption in 2013. The National Energy Strategy 2020 (ENE2020), which aims to ensure the national compliance of the European Strategy 20/20/20, states that about half of this 60% target will be provided by wind energy. This work aims to implement and optimise a numerical weather prediction model in the simulation and modelling of the wind energy resource in Portugal, both in offshore and onshore areas. The numerical model optimisation consisted in the determination of which initial and boundary conditions and planetary boundary layer physical parameterizations options provide wind power flux (or energy density), wind speed and direction simulations closest to in situ measured wind data. Specifically for offshore areas, it is also intended to evaluate if the numerical model, once optimised, is able to produce power flux, wind speed and direction simulations more consistent with in situ measured data than wind measurements collected by satellites. This work also aims to study and analyse possible impacts that anthropogenic climate changes may have on the future wind energetic resource in Europe. The results show that the ECMWF reanalysis ERA-Interim are those that, among all the forcing databases currently available to drive numerical weather prediction models, allow wind power flux, wind speed and direction simulations more consistent with in situ wind measurements. It was also found that the Pleim-Xiu and ACM2 planetary boundary layer parameterizations are the ones that showed the best performance in terms of wind power flux, wind speed and direction simulations. This model optimisation allowed a significant reduction of the wind power flux, wind speed and direction simulations errors and, specifically for offshore areas, wind power flux, wind speed and direction simulations more consistent with in situ wind measurements than data obtained from satellites, which is a very valuable and interesting achievement. This work also revealed that future anthropogenic climate changes can negatively impact future European wind energy resource, due to tendencies towards a reduction in future wind speeds especially by the end of the current century and under stronger radiative forcing conditions.

The labor force of the future.

PubMed

Norwood, J L

1987-07-01

In the decades ahead, the US labor force will reflect changes in the industrial structure, with declines in some manufacturing industries and expansion in service industries. The services sector is so diverse that the jobs within it cannot be categorized as either high wage or low wage. The service-producing sector employs 85% of professional specialty workers in the US. In general, information on compensation trends indicates that greater increases in compensation have occurred for workers in service-producing as opposed to goods-producing industries. The increase in service sector jobs has created opportunities for women to enter the labor force and, at present, 5 out of 6 women work in this sector compared to fewer than 2 out of 3 men. Productivity growth rates in the service-producing industries vary substantially and are strongly affected by the business cycle. Central to employment opportunities in the years ahead will be the effect of new technology. To date, the aggregate effect of new technology has been increased employment and higher living standards. Although retraining programs should be in place, the scenario of a huge technology-created labor surplus seems unlikely. In fact, a more likely problem is a shortage of labor resulting from earlier labor force withdrawal and demographic aging of the population. Those in the 25-54-year age group will represent a larger share of the labor force in the years ahead. In addition, blacks are expected to account for 20% of the labor force growth in the next decade. Finally, given increasing labor force participation rates among mothers, employers may have to provide more flexible work schedules, assistance with day care, and more attractive benefits packages.

Success in Kashmir: a positive trend in civil-military integration during humanitarian assistance operations.

PubMed

Thompson, Wiley C

2010-01-01

The modern cast of disaster relief actors includes host nations, non-governmental organisations, private volunteer organisations, military organisations and others. Each group, civilian or military, has valuable skills and experiences critical to disaster relief work. The goal of this paper is to supplement the study of civil-military relief efforts with contemporary anecdotal experience. The paper examines the interaction between US military forces and other disaster relief actors during the 2005 Kashmir earthquake relief effort. The author uses direct observations made while working in Pakistan to contrast the relationships and activities from that effort with other accounts in prevailing scholarly disaster literature and military doctrine. Finally, this paper suggests that the Kashmir model of integration, coordination and transparency of intent creates a framework in which future humanitarian assistance operations could be successfully executed. Recommendations to improve civil-military interaction in future relief efforts will also be addressed.

ANNETTE Project: Contributing to The Nuclearization of Fusion

NASA Astrophysics Data System (ADS)

Ambrosini, W.; Cizelj, L.; Dieguez Porras, P.; Jaspers, R.; Noterdaeme, J.; Scheffer, M.; Schoenfelder, C.

2018-01-01

The ANNETTE Project (Advanced Networking for Nuclear Education and Training and Transfer of Expertise) is well underway, and one of its work packages addresses the design, development and implementation of nuclear fusion training. A systematic approach is used that leads to the development of new training courses, based on identified nuclear competences needs of the work force of (future) fusion reactors and on the current availability of suitable training courses. From interaction with stakeholders involved in the ITER design and construction or the JET D-T campaign, it became clear that the lack of nuclear safety culture awareness already has an impact on current projects. Through the collaboration between the European education networks in fission (ENEN) and fusion (FuseNet) in the ANNETTE project, this project is well positioned to support the development of nuclear competences for ongoing and future fusion projects. Thereby it will make a clear contribution to the realization of fusion energy.

An Analysis of Information Structure and Optimal Transfer Pricing decision Rules for Decentralized Firms

DTIC Science & Technology

1980-12-01

Inventories and Work Force, Prentice-Hall, Englewood Cliffs, New Jersey (1960). Horngren , C. T. Cost Accounting : A Managerial Emphasis, Fourth Edition...achieved/received by virtue of AFIT performing the research. Can you estimate what this research would have cost if it had been accomplished under...future potential, or other value of this research. Please use the bottom part of this questionnaire for your statement( s ). NAME GRADE POSITION

Jordanian National Security and the Future of Middle East Stability

DTIC Science & Technology

2008-01-01

East. This analysis should be especially useful to U.S. strategic leaders as they seek to address the complicated interplay of factors related to...explosion.185 The internationally known film director, Moustapha Akkad, along with his daughter, was also killed at the Radisson SAS hotel.186...236 The U.S. Marine Corps works with the Jordanian military in Exercise Infinite Moonlight and U.S. Special Forces conduct Exercise Early Victor

Science in 60 – Simulating Flames Helps Tame Future Wildfires

ScienceCinema

Lin, Rod

2018-01-16

FIRETEC presents a new way of studying fire and learning how to better manage and cope with it. The model provides additional scientific input for decisions by policymakers working in land management, water resources and energy. The team hopes it will eventually assist fire and fuel management operations. This research is done in partnership with the USDA Forest Service, Air Force Wildland Fire Center, INRA and Canadian Forest Service.

The Future of Air Force Motion Imagery Exploitation: Lessons from the Commercial World

DTIC Science & Technology

2012-01-01

works during the filming of the show, the primary exception 14 Although not the first of its kind, the breakthrough program for this genre on U.S...recent genre of popular television pro- gramming that relies on the unscripted performances of people who are not professional actors (the cast...reality television production crews; such moments, from which the genre derives its name, are often prominently featured in reality television

Evaluating MEDEVAC Force Structure Requirements Using an Updated Army Scenario, Total Army Analysis Admission Data, Monte Carlo Simulation, and Theater Structure.

PubMed

Fulton, Lawrence; Kerr, Bernie; Inglis, James M; Brooks, Matthew; Bastian, Nathaniel D

2015-07-01

In this study, we re-evaluate air ambulance requirements (rules of allocation) and planning considerations based on an Army-approved, Theater Army Analysis scenario. A previous study using workload only estimated a requirement of 0.4 to 0.6 aircraft per admission, a significant bolus over existence-based rules. In this updated study, we estimate requirements for Phase III (major combat operations) using a simulation grounded in previously published work and Phase IV (stability operations) based on four rules of allocation: unit existence rules, workload factors, theater structure (geography), and manual input. This study improves upon previous work by including the new air ambulance mission requirements of Department of Defense 51001.1, Roles and Functions of the Services, by expanding the analysis over two phases, and by considering unit rotation requirements known as Army Force Generation based on Department of Defense policy. The recommendations of this study are intended to inform future planning factors and already provided decision support to the Army Aviation Branch in determining force structure requirements. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

Low-power circuits design for the wireless force measurement system of the total knee arthroplasty.

PubMed

Chen, Hong; Liu, Ming; Wan, Weiyi; Jia, Chen; Zhang, Chun; Wang, Zihua

2010-01-01

This paper proposes a novel wireless force measurement system for the Total Knee Arthroplasty (TKA) to improve the ligament balancing procedure during TKA. The force measurement system is comprised of a Wireless Force Measurement Spacer (WFMS) and the display part. They communicate with each other by the Radio Frequency (RF) signal. The WFMS is designed to measure the force between the WFMS and the femoral component of the artificial implants and to transmit the force data wirelessly by a low power transceiver. The display part demonstrates the force data in 3D images in real time. The WFMS composes of a sensors array, a Universal Transducer Interfaces (UTIs) array, a low-power sub-threshold microprocessor and a transceiver. The sub-threshold 8-bit microprocessor is taped out with 0.18 microm CMOS technology. The testing results of the microprocessor show that the leakage power of 46nW and the dynamic power of 385nW@165kHz are achieved with the operating voltage of 350 mV. The test results of the system are given and the errors of the system are analyzed. The results verified the reliability of the system. The future work is to design the microprocessor and a lower power transceiver within a single chip.

Alternative Futures and Army Force Planning. Implications for the Future Force Era

DTIC Science & Technology

2005-01-01

narcotraffickers had to establish coca fields in other Latin American countries like Bolivia and Peru , build processing labs in remote areas of the Amazon basin...emergence of Al Qaeda as a potent worldwide force, both the scope and the duration of the war on terrorism remain un- certain, as does the level of...future. Our hypothesis was that a drastic downturn in any one of the development variables would drag the remaining four at least into the medium category

Race/ethnicity and sex in U.S. occupations, 1970-2010: Implications for research, practice, and policy.

PubMed

Byars-Winston, Angela; Fouad, Nadya; Wen, Yao

2015-04-01

We used census data on the civilian non-institutional adult population to analyze trends in labor force participation by race/ethnicity and sex in U.S. occupations from 1970 to 2010 in decennial periods. We examined these data for the main effects and interactions of race/ethnicity and sex across the total labor market and within 35 detailed occupations. Results from a log-linear analysis revealed that, as a whole (across race/ethnicity), more women participated in the labor force from 1970 to 2010. The proportions of working racial/ethnic minorities to both the population and the people in the labor force increased across all decades except for Black men. Although White (Caucasian) men continuously comprised the largest racial/ethnic-sex group working across five decades in absolute numbers, their percentage of the total working population declined from 1970 (54%) to 2010 (37%). In our analyses of 35 occupations, significant sex differences within racial/ethnic groups emerged. Overall, with some exceptions, Asian men and women and White women were more likely to be absorbed into occupations typically associated with professional status whereas Black, Hispanic, and American Indian men and women were more likely to be absorbed into occupations typically associated with low skill, low wages, and low status. Implications for the role of psychologists in future research, practice, and policy are discussed.

Race/ethnicity and sex in U.S. occupations, 1970–2010: Implications for research, practice, and policy

PubMed Central

Byars-Winston, Angela; Fouad, Nadya; Wen, Yao

2015-01-01

We used census data on the civilian non-institutional adult population to analyze trends in labor force participation by race/ethnicity and sex in U.S. occupations from 1970 to 2010 in decennial periods. We examined these data for the main effects and interactions of race/ethnicity and sex across the total labor market and within 35 detailed occupations. Results from a log-linear analysis revealed that, as a whole (across race/ethnicity), more women participated in the labor force from 1970 to 2010. The proportions of working racial/ethnic minorities to both the population and the people in the labor force increased across all decades except for Black men. Although White (Caucasian) men continuously comprised the largest racial/ethnic–sex group working across five decades in absolute numbers, their percentage of the total working population declined from 1970 (54%) to 2010 (37%). In our analyses of 35 occupations, significant sex differences within racial/ethnic groups emerged. Overall, with some exceptions, Asian men and women and White women were more likely to be absorbed into occupations typically associated with professional status whereas Black, Hispanic, and American Indian men and women were more likely to be absorbed into occupations typically associated with low skill, low wages, and low status. Implications for the role of psychologists in future research, practice, and policy are discussed. PMID:25937638

Validity and reliability of a controlled pneumatic resistance exercise device.

PubMed

Paulus, David C; Reynolds, Michael C; Schilling, Brian K

2008-01-01

During the concentric portion of the free-weight squat exercise, accelerating the mass from rest results in a fluctuation in ground reaction force. It is characterized by an initial period of force greater than the load while accelerating from rest followed by a period of force lower than the external load during negative acceleration. During the deceleration phase, less force is exerted and muscles are loaded sub-optimally. Thus, using a reduced inertia form of resistance such as pneumatics has the capability to minimize these inertial effects as well as control the force in real time to maximize the force exerted over the exercise cycle. To improve the system response of a preliminary design, a squat device was designed with a reduced mass barbell and two smaller pneumatic cylinders. The resistance was controlled by regulating cylinder pressure such that it is capable of adjusting force within a repetition to maximize force exerted during the lift. The resistance force production of the machine was statically validated with the input voltage and output force R2 =0.9997 for at four increments of the range of motion, and the intraclass correlation coefficient (ICC) between trials at the different heights equaled 0.999. The slew rate at three forces was 749.3 N/s +/- 252.3. Dynamic human subject testing showed the desired input force correlated with average and peak ground reaction force with R2 = 0.9981 and R2 = 0.9315, respectively. The ICC between desired force and average and peak ground reaction force was 0.963. Thus, the system is able to deliver constant levels of static and dynamic force with validity and reliability. Future work will be required to develop the control strategy required for real-time control, and performance testing is required to determine its efficacy.

Women in the Labor Force: Trends, Consequences, and Policy Implications.

ERIC Educational Resources Information Center

Musewicz, John; And Others

In this paper changes in labor force participation for women in North Carolina are examined and projected into the future. The projections demonstrate that the number of employed females, especially mothers, will be much greater in the future than at present. Thus, the issues related to female labor force participation will be even more salient in…

Early warning of climate tipping points

NASA Astrophysics Data System (ADS)

Lenton, Timothy M.

2011-07-01

A climate 'tipping point' occurs when a small change in forcing triggers a strongly nonlinear response in the internal dynamics of part of the climate system, qualitatively changing its future state. Human-induced climate change could push several large-scale 'tipping elements' past a tipping point. Candidates include irreversible melt of the Greenland ice sheet, dieback of the Amazon rainforest and shift of the West African monsoon. Recent assessments give an increased probability of future tipping events, and the corresponding impacts are estimated to be large, making them significant risks. Recent work shows that early warning of an approaching climate tipping point is possible in principle, and could have considerable value in reducing the risk that they pose.

Sexual harassment at work place: are you safe?

PubMed

Naveed, Anila; Tharani, Ambreen; Alwani, Nasreen

2010-01-01

In today's world women are increasingly participating in the realm of work force, yet they are facing many obstacles in their way. Sexual harassment is one of those obstacles. Sexual harassment at work place is prevalent in every society. It could happen to anyone but women are the targeted victims. Sexual harassment is considered as a traumatic event and the victim may end up in having physical and mental sufferings that hinders a person to work effectively. At an organisational level this may result in decrease work effectiveness, decreased work productivity, high absenteeism, high turnover, and low staff morale. Hence there is a need that, organisations and government should look seriously into this matter. Proper education and training programs should be developed to deal with these issues. The goal must be both to deal with sexual harassment incidents effectively and to prevent the occurrence of future incidents.

Working memory and proverb comprehension in adolescents with traumatic brain injury: a preliminary investigation.

PubMed

Moran, Catherine A; Nippold, Marilyn A; Gillon, Gail T

2006-04-01

This study investigated the relationship between working memory and comprehension of low-familiarity proverbs in adolescents with traumatic brain injury (TBI). Ten adolescents, aged 12-21 years who had suffered a TBI prior to the age of 10 years and 10 individually age-matched peers with typical development participated in the study. The participants listened to short paragraphs containing a proverb and interpreted the meaning of the proverb using a forced-choice task. In addition, participants engaged in a task that evaluated working memory ability. Analysis revealed that individuals with TBI differed from their non-injured peers in their understanding of proverbs. In addition, working memory capacity influenced performance for all participants. The importance of considering working memory when evaluating figurative language comprehension in adolescents with TBI is highlighted. Implications for future research, particularly with regard to varying working memory and task demands, are considered.

Changes of glaciers in the Andes of Chile and priorities for future work.

PubMed

Pellicciotti, F; Ragettli, S; Carenzo, M; McPhee, J

2014-09-15

Glaciers in the Andes of Chile seem to be shrinking and possibly loosing mass, but the number and types of studies conducted, constrained mainly by data availability, are not sufficient to provide a synopsis of glacier changes for the past or future or explain in an explicit way causes of the observed changes. In this paper, we provide a systematic review of changes in glaciers for the entire country, followed by a discussion of the studies that have provided evidence of such changes. We identify a missing type of work in distributed, physically-oriented modelling studies that are needed to bridge the gap between the numerous remote sensing studies and the specific, point scale works focused on process understanding. We use an advanced mass balance model applied to one of the best monitored glaciers in the region to investigate four main research issues that should be addressed in modelling studies for a sound assessment of glacier changes: 1) the use of physically-based models of glacier ablation (energy balance models) versus more empirical models (enhanced temperature index approaches); 2) the importance of the correct extrapolation of air temperature forcing on glaciers and in high elevation areas and the large uncertainty in model outputs associated with it; 3) the role played by snow gravitational redistribution; and 4) the uncertainty associated with future climate scenarios. We quantify differences in model outputs associated with each of these choices, and conclude with suggestions for future work directions. © 2013 Elsevier B.V. All rights reserved.

A proposed experimental search for chameleons using asymmetric parallel plates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burrage, Clare; Copeland, Edmund J.; Stevenson, James A., E-mail: Clare.Burrage@nottingham.ac.uk, E-mail: ed.copeland@nottingham.ac.uk, E-mail: james.stevenson@nottingham.ac.uk

2016-08-01

Light scalar fields coupled to matter are a common consequence of theories of dark energy and attempts to solve the cosmological constant problem. The chameleon screening mechanism is commonly invoked in order to suppress the fifth forces mediated by these scalars, sufficiently to avoid current experimental constraints, without fine tuning. The force is suppressed dynamically by allowing the mass of the scalar to vary with the local density. Recently it has been shown that near future cold atoms experiments using atom-interferometry have the ability to access a large proportion of the chameleon parameter space. In this work we demonstrate howmore » experiments utilising asymmetric parallel plates can push deeper into the remaining parameter space available to the chameleon.« less

Fractional Stochastic Differential Equations Satisfying Fluctuation-Dissipation Theorem

NASA Astrophysics Data System (ADS)

Li, Lei; Liu, Jian-Guo; Lu, Jianfeng

2017-10-01

We propose in this work a fractional stochastic differential equation (FSDE) model consistent with the over-damped limit of the generalized Langevin equation model. As a result of the `fluctuation-dissipation theorem', the differential equations driven by fractional Brownian noise to model memory effects should be paired with Caputo derivatives, and this FSDE model should be understood in an integral form. We establish the existence of strong solutions for such equations and discuss the ergodicity and convergence to Gibbs measure. In the linear forcing regime, we show rigorously the algebraic convergence to Gibbs measure when the `fluctuation-dissipation theorem' is satisfied, and this verifies that satisfying `fluctuation-dissipation theorem' indeed leads to the correct physical behavior. We further discuss possible approaches to analyze the ergodicity and convergence to Gibbs measure in the nonlinear forcing regime, while leave the rigorous analysis for future works. The FSDE model proposed is suitable for systems in contact with heat bath with power-law kernel and subdiffusion behaviors.

Biogeographic and ecological regulation of disease: Prevalence of Sin Nombre virus in island mice is related to island area, precipitation, and predator richness

USGS Publications Warehouse

Orrock, John L.; Allan, Brian F.; Drost, Charles A.

2011-01-01

The relative roles of top-down and bottom-up forces in affecting disease prevalence in wild hosts is important for understanding disease dynamics and human disease risk. We found that the prevalence of Sin Nombre virus (SNV), the agent of a severe disease in humans (hantavirus pulmonary syndrome), in island deer mice from the eight California Channel Islands was greater with increased precipitation (a measure of productivity), greater island area, and fewer species of rodent predators. In finding a strong signal of the ecological forces affecting SNV prevalence, our work highlights the need for future work to understand the relative importance of average rodent density, population fluctuations, behavior, and specialist predators as they affect SNV prevalence. In addition to illustrating the importance of both bottom-up and top-down limitation of disease prevalence, our results suggest that predator richness may have important bearing on the risk of exposure to animal-borne diseases that affect humans.

High Performance Computing and Enabling Technologies for Nano and Bio Systems and Interfaces

DTIC Science & Technology

2014-12-12

data analysis of protein – aptamer interaction systems were developed. All research investigations contributed to the research education , and training...achieved a 3.5 GPA to 4.0 (4.0 max scale): Number of graduating undergraduates funded by a DoD funded Center of Excellence grant for Education , Research...Research, education and training of future US work force in such nano- bio systems have significant potential for advancement in medical and health

Sequestration: Comprehensive and Updated Cost Savings Would Better Inform DOD Decision Makers If Future Civilian Furloughs Occur

DTIC Science & Technology

2014-06-01

except from the furlough based upon prioritized needs, such as evening shift supervisors within its nursing department. Also, the Public Works...Center described a decline in morale within the Army inpatient nursing staff because the Air Force excepted its inpatient nursing staff from furlough...Army Surgeon General made a statement that, during 2013, 2,700 Army civilian medical doctors, nurses , and other health workers left their jobs for

Integration and Utilization of Distinctive Faith Group Chaplains within the United States Air Force Chaplaincy.

DTIC Science & Technology

1986-05-01

17 Seventh - day Adventist .... ............. 18 Unitarians ....... ................... 19 V FUTURE UTILIZATION AND INTEGRATION OF DISTINCTIVE FAITH... Seventh - day Adventists , said: "I feel I have had tle opportunity to be fully integrated into the work of the chaplaincy." 4 Indicating the need to be...highlight this point. Chaplain, Captain Randon N. Hesgard, Seventh - day Adventists , states: "The concepts I had to sort out were the use of robes, the

Recent developments in dimensional nanometrology using AFMs

NASA Astrophysics Data System (ADS)

Yacoot, Andrew; Koenders, Ludger

2011-12-01

Scanning probe microscopes, in particular the atomic force microscope (AFM), have developed into sophisticated instruments that, throughout the world, are no longer used just for imaging, but for quantitative measurements. A role of the national measurement institutes has been to provide traceable metrology for these instruments. This paper presents a brief overview as to how this has been achieved, highlights the future requirements for metrology to support developments in AFM technology and describes work in progress to meet this need.

A novel 3D-printed mechanical actuator using centrifugal force for magnetic resonance elastography.

PubMed

Neumann, Wiebke; Schad, Lothar R; Zollner, Frank G

2017-07-01

Magnetic resonance elastography (MRE) is a technique for the quantification of tissue stiffness during MR examinations. It requires consistent methods for mechanical shear wave induction to the region of interest in the human body to reliably quantify elastic properties of soft tissues. This work proposes a novel 3D-printed mechanical actuator using the principle of centrifugal force for wave induction. The driver consists of a 3D-printed turbine vibrator powered by compressed air (located inside the scanner room) and an active driver controlling the pressure of inflowing air (placed outside the scanner room). The generated force of the proposed actuator increases for higher actuation frequencies as opposed to conventionally used air cushions. There, the displacement amplitude decreases with increasing actuation frequency resulting in a smaller signal-to-noise ratio. An initial phantom study is presented which demonstrates the feasibility of the actuator for MRE. The wave-actuation frequency was regulated in a range between 15 Hz and 60 Hz for force measurements and proved sufficiently stable (± 0.3 Hz) for any given nominal frequency. The generated forces depend on the weight of the eccentric unbalance within the turbine and ranged between 0.67 N to 2.70 N (for 15 Hz) and 3.09 N to 7.77 N (for 60 Hz). Therefore, the generated force of the presented actuator increases with rotational speed of the turbine and offers an elegant solution for sufficiently large wave actuation at higher frequencies. In future work, we will investigate an optimal ratio of the weight of unbalance to the size of turbine for appropriately large but tolerable wave actuation for a given nominal frequency.

Identification of Occupational Areas for Indiana's Future. Final Report of the Technology Forecasting Task Force.

ERIC Educational Resources Information Center

Indiana State Commission on Vocational and Technical Education, Indianapolis.

A task force representing the Indiana private sector was convened for two purposes: to (1) identify the impact of technology on required worker skills, the labor market, and the vocational education, training, and employment system; and (2) identify occupational areas that should be future growth areas for the state. Task force members reviewed…

An Army Force Structure for the Future

DTIC Science & Technology

1992-03-31

realization: deterring aggression; ensuring access to foreign markets , energy, mineral resources, the oceans, and space; maintaining stable regional...establish the optimum organisational mix for independent and highly flexible operational-level activity." 7 Two factors are driving this structural change...armored forces; and optimizing the force mix of the three. However, before describing the specific changes needed to shape the future Army, a delineation

A Finite-Element Method Model of Soft Tissue Response to Impulsive Acoustic Radiation Force

PubMed Central

Palmeri, Mark L.; Sharma, Amy C.; Bouchard, Richard R.; Nightingale, Roger W.; Nightingale, Kathryn R

2010-01-01

Several groups are studying acoustic radiation force and its ability to image the mechanical properties of tissue. Acoustic radiation force impulse (ARFI) imaging is one modality using standard diagnostic ultrasound scanners to generate localized, impulsive, acoustic radiation forces in tissue. The dynamic response of tissue is measured via conventional ultrasonic speckle-tracking methods and provides information about the mechanical properties of tissue. A finite-element method (FEM) model has been developed that simulates the dynamic response of tissues, with and without spherical inclusions, to an impulsive acoustic radiation force excitation from a linear array transducer. These FEM models were validated with calibrated phantoms. Shear wave speed, and therefore elasticity, dictates tissue relaxation following ARFI excitation, but Poisson’s ratio and density do not significantly alter tissue relaxation rates. Increased acoustic attenuation in tissue increases the relative amount of tissue displacement in the near field compared with the focal depth, but relaxation rates are not altered. Applications of this model include improving image quality, and distilling material and structural information from tissue’s dynamic response to ARFI excitation. Future work on these models includes incorporation of viscous material properties and modeling the ultrasonic tracking of displaced scatterers. PMID:16382621

In pursuit of photo-induced magnetic and chiral microscopy

NASA Astrophysics Data System (ADS)

Zeng, Jinwei; Kamandi, Mohammad; Darvishzadeh-Varcheie, Mahsa; Albooyeh, Mohammad; Veysi, Mehdi; Guclu, Caner; Hanifeh, Mina; Rajaei, Mohsen; Potma, Eric O.; Wickramasinghe, H. Kumar; Capolino, Filippo

2018-06-01

Light-matter interactions enable the perception of specimen properties such as its shape and dimensions by measuring the subtle differences carried by an illuminating beam after interacting with the sample. However, major obstacles arise when the relevant properties of the specimen are weakly coupled to the incident beam, for example when measuring optical magnetism and chirality. To address this challenge we propose the idea of detecting such weakly-coupled properties of matter through the photo-induced force, aiming at developing photo-induced magnetic or chiral force microscopy. Here we review our pursuit consisting of the following steps: (1) Development of a theoretical blueprint of a magnetic nanoprobe to detect a magnetic dipole oscillating at an optical frequency when illuminated by an azimuthally polarized beam via the photo-induced magnetic force; (2) Conducting an experimental study using an azimuthally polarized beam to probe the near fields and axial magnetism of a Si disk magnetic nanoprobe, based on photo-induced force microscopy; (3) Extending the concept of force microscopy to probe chirality at the nanoscale, enabling enantiomeric detection of chiral molecules. Finally, we discuss difficulties and how they could be overcome, as well as our plans for future work. Invited Paper

Development of a Refined Space Vehicle Rollout Forcing Function

NASA Technical Reports Server (NTRS)

James, George; Tucker, Jon-Michael; Valle, Gerard; Grady, Robert; Schliesing, John; Fahling, James; Emory, Benjamin; Armand, Sasan

2016-01-01

For several decades, American manned spaceflight vehicles and the associated launch platforms have been transported from final assembly to the launch pad via a pre-launch phase called rollout. The rollout environment is rich with forced harmonics and higher order effects can be used for extracting structural dynamics information. To enable this utilization, processing tools are needed to move from measured and analytical data to dynamic metrics such as transfer functions, mode shapes, modal frequencies, and damping. This paper covers the range of systems and tests that are available to estimate rollout forcing functions for the Space Launch System (SLS). The specific information covered in this paper includes: the different definitions of rollout forcing functions; the operational and developmental data sets that are available; the suite of analytical processes that are currently in-place or in-development; and the plans and future work underway to solve two immediate problems related to rollout forcing functions. Problem 1 involves estimating enforced accelerations to drive finite element models for developing design requirements for the SLS class of launch vehicles. Problem 2 involves processing rollout measured data in near real time to understand structural dynamics properties of a specific vehicle and the class to which it belongs.

The Future in the Making. Current Issues in Higher Education 1973.

ERIC Educational Resources Information Center

Vermilye, Dyckman W., Ed.

The future of higher education is in the making, and the control of that future is of immediate concern to all educators. The chapters in this book describe the political, economic, technological, moral, and social forces influencing the direction of higher education today, and show how these forces can be more effectively harnessed. In examining…

Challenges faced by ice sheet projections: lessons from the SeaRISE effort

NASA Astrophysics Data System (ADS)

Nowicki, S.

2013-12-01

Projecting the future evolution of the Greenland and Antarctic ice sheets is a problem of enormous societal importance, as ice sheet influence our future sea levels. This crucial issue is however a non trivial task, as demonstrated by the Sea level Response to Ice Sheet Evolution (SeaRISE) effort: prescribing simple external forcings to a group of ice sheet models results in a spread in responses. Understanding the source of the diversity in the model results is therefore crucial in order to reduce the uncertainty in the projection. Just as in any future climate simulation, the analysis presented here demonstrates that the model spread in the SeaRISE effort is due to a number of factors. First is the problem of obtaining an initial configuration for the projection. The two commonly used methods, interglacial spin-up or data assimilation, have both advantages and drawbacks, and will affect the determination of fields that cannot be measured (such as basal slipperiness). Second is the uncertainty in actual observations, which includes but is not limited to surface mass balance, basal topography, ice thickness, and surface velocities. An additional issue with these observations is that they can be transient quantities which are not measured at the same time, but ice sheet models require them to be simultaneous. Third is the uncertainty in the models' physics and discretization, which is limited by our understanding (or lack of understanding) of crucial processes that often occur at subgrid scale relative to the resolution used by continental ice sheet models, and thus require parameterization. Grounding line migration and sliding laws are such an example. Fourth is the determination of the future forcing scenarios and their implementation as the external forcing. Unfortunately, as demonstrated in this analysis, all ice sheet models face these limitations to some degree, so that it is extremely difficult to identify a set of models and projections that should be trusted in preference to others. One model might be more suitable for assessing the impact of a warmer atmosphere because of its initialization procedure, but its deficiencies in capturing grounding line migration, for example, might make its projections for oceanic forcing unreliable. More work is thus required to evaluate individual ice sheet models' skills in projection, but this crucial and challenging task is left for future studies.

2017 Annual Meeting of the American College of Radiology-Moreton Lecture: Forecasting the Futures of Radiology.

PubMed

Bauer, Jeffrey C

2017-12-01

The traditional forces of change in health care are no longer working as they did in the past. Political gridlock has destroyed Washington's ability to create sensible policy for reforming the medical marketplace, creating chaos for providers. Fortunately, chaos creates opportunity. The idea of creating one's future has never been more relevant and necessary. Predicting-the science of extrapolating future values from historical data-is not a valid method for looking ahead when causal relationships that explained change in the past are themselves being redefined (the current situation). Forecasting-the art of estimating probabilities of possibilities-is the appropriate method for anticipating futures when causality is being redefined. With its focus on identifying a range of possibilities, forecasting identifies many different outcomes that are simultaneously possible for radiology. Health care's new climate is being shaped by four defining trends: 1) revolution in biological science that is shifting caregivers' mission from acute care to disease management; 2) proliferation of information and communications technologies that are transforming the way care is delivered; 3) end of economic growth in the medical marketplace that is reshaping demand for care; and 4) political dysfunction that forces caregivers and their business partners to develop successful futures on their own. Radiology 3.0 is nicely aligned with the transformational trends. Staying focused on implementing Radiology 3.0 is supported as the optimal strategy for creating the profession's futures. Diagnostic convergence, establishing a unified diagnostic science with laboratory medicine, is proposed as a complementary initiative. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

ARV robotic technologies (ART): a risk reduction effort for future unmanned systems

NASA Astrophysics Data System (ADS)

Jaster, Jeffrey F.

2006-05-01

The Army's ARV (Armed Robotic Vehicle) Robotic Technologies (ART) program is working on the development of various technological thrusts for use in the robotic forces of the future. The ART program will develop, integrate and demonstrate the technology required to advance the maneuver technologies (i.e., perception, mobility, tactical behaviors) and increase the survivability of unmanned platforms for the future force while focusing on reducing the soldiers' burden by providing an increase in vehicle autonomy coinciding with a decrease in the total number user interventions required to control the unmanned assets. This program will advance the state of the art in perception technologies to provide the unmanned platform an increasingly accurate view of the terrain that surrounds it; while developing tactical/mission behavior technologies to provide the Unmanned Ground Vehicle (UGV) the capability to maneuver tactically, in conjunction with the manned systems in an autonomous mode. The ART testbed will be integrated with the advanced technology software and associated hardware developed under this effort, and incorporate appropriate mission modules (e.g. RSTA sensors, MILES, etc.) to support Warfighter experiments and evaluations (virtual and field) in a military significant environment (open/rolling and complex/urban terrain). The outcome of these experiments as well as other lessons learned through out the program life cycle will be used to reduce the current risks that are identified for the future UGV systems that will be developed under the Future Combat Systems (FCS) program, including the early integration of an FCS-like autonomous navigation system onto a tracked skid steer platform.

Resistive thrust production can be as crucial as added mass mechanisms for inertial undulatory swimmers

NASA Astrophysics Data System (ADS)

Piñeirua, M.; Godoy-Diana, R.; Thiria, B.

2015-08-01

In this Rapid Communication, we address a crucial point regarding the description of moderate to high Reynolds numbers aquatic swimmers. For decades, swimming animals have been classified in two different families of propulsive mechanisms based on the Reynolds number: the resistive swimmers, using local friction to produce the necessary thrust force for locomotion at low Reynolds number, and the reactive swimmers, lying in the high Reynolds range, and using added mass acceleration (described by perfect fluid theory). However, inertial swimmers are also systems that dissipate energy, due to their finite size, therefore involving strong resistive contributions, even for high Reynolds numbers. Using a complete model for the hydrodynamic forces, involving both reactive and resistive contributions, we revisit here the physical mechanisms responsible for the thrust production of such swimmers. We show, for instance, that the resistive part of the force balance is as crucial as added mass effects in the modeling of the thrust force, especially for elongated species. The conclusions brought by this work may have significant contributions to the understanding of complex swimming mechanisms, especially for the future design of artificial swimmers.

A force-controllable macro-micro manipulator and its application to medical robots

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.; Uecker, Darrin R.; Wang, Yulun

1994-01-01

This paper describes an 8-degrees-of-freedom macro-micro robot. This robot is capable of performing tasks that require accurate force control, such as polishing, finishing, grinding, deburring, and cleaning. The design of the macro-micro mechanism, the control algorithms, and the hardware/software implementation of the algorithms are described in this paper. Initial experimental results are reported. In addition, this paper includes a discussion of medical surgery and the role that force control may play. We introduce a new class of robotic systems collectively called Robotic Enhancement Technology (RET). RET systems introduce the combination of robotic manipulation with human control to perform manipulation tasks beyond the individual capability of either human or machine. The RET class of robotic systems offers new challenges in mechanism design, control-law development, and man/machine interface design. We believe force-controllable mechanisms such as the macro-micro structure we have developed are a necessary part of RET. Work in progress in the area of RET systems and their application to minimally invasive surgery is presented, along with future research directions.

[Demography and labor shortage. Future challenges of labor market policy].

PubMed

Fuchs, J

2013-03-01

For demographic reasons, the German labor force will decrease dramatically and it will be much older on average. However, labor demand, especially for qualified workers, is expected to remain high. This paper focuses on the possibilities of expanding the labor force by increasing the participation rates of women and older persons. Herein, the change in the labor force is decomposed with respect to population and labor participation and, moreover, the effects of higher participation rates are simulated. The decomposition and simulation scenarios are based on data published by the Institute for Employment Research. The analysis clearly reveals that the effect of a considerably higher labor participation of women and older workers will disappear over time when the working-age population shrinks more and more. In addition, individuals who are currently unemployed or out of the labor force are not skilled enough. Since it seems difficult to get more qualified workers in the short and even in the medium term, improving the conditions for women and older people to take up jobs should be tackled soon. This includes investments in education and health care.

The future population and the future labour force.

PubMed

Young, C

1994-01-01

"The combination of two recent publications by the Australian Bureau of Statistics (ABS) provides a useful insight into feasible future trends in the population, the labour force and dependency ratios. In addition, earlier ABS census data and its regular publications from the Labour Force Surveys clarify the historical trends in the relative number of dependants and nondependants. These various sources of data are brought together in this paper.... Official population projections...highlight the fact that the combination of annual zero net migration and 10 per cent below replacement fertility would not produce an immediate decline in Australia's population.... The conventional labour-force dependency ratio suggests that the dependency situation in Australia in 2041 will be no worse than it was in the early 1980s." excerpt

The Future of the Skilled Labor Force: New England's Supply of Recent College Graduates

ERIC Educational Resources Information Center

Sasser, Alicia C.

2009-01-01

One of New England's greatest assets is its skilled labor force, which has historically been an engine of economic growth in the region. But the skilled labor force of the future is growing more slowly in New England than in the rest of the United States. Since 2000, the population of "recent college graduates"--individuals ages 22 to 27…

Junior doctors' working hours: perspectives on the reforms.

PubMed

Wilkinson, Carol

2008-06-01

The European Working Time Directive for junior doctors came into force in Britain in August 2004. The reforms themselves have been a long time in development and implementation since the inception and debates regarding the New Deal, to the current formations under health and safety legislation. This study, undertaken within a hospital trust setting in England, provides an insight into the perspectives of doctors, nurses and human resources managers in relation to the European Working Time Directive. Critical consideration is given to the impact of the reforms upon the National Health Service and more specifically to daily working relationships at the point of implementation. The results demonstrate some ambivalence towards the reforms because of the major shift in culture for the professions per se, but also for the future of health-care delivery where there are considerable tensions.

Longitudinal associations of experiences of adversity and socioeconomic disadvantage during childhood with labour force participation and exit in later adulthood.

PubMed

Fahy, A E; Stansfeld, S A; Smuk, M; Lain, D; van der Horst, M; Vickerstaff, S; Clark, C

2017-06-01

The Extending Working Lives (EWL) agenda seeks to sustain employment up to and beyond traditional retirement ages. This study examined the potential role of childhood factors in shaping labour force participation and exit among older adults, with a view to informing proactive interventions early in the life-course to enhance individuals' future capacity for extending their working lives. Childhood adversity and socioeconomic disadvantage have previously been linked to ill-health across the life-span and sickness benefit in early adulthood. This study builds upon previous research by examining associations between childhood adversity and self-reported labour force participation among older adults (aged 55). Data was from the National Child Development Study - a prospective cohort of all English, Scottish, & Welsh births in one week in 1958. There was evidence for associations between childhood adversity and increased risk of permanent sickness at 55 years - which were largely sustained after adjustment for educational disengagement and adulthood factors (mental/physical health, qualifications, socioeconomic disadvantage). Specifically, children who were abused or neglected were more likely to be permanently sick at 55 years. In addition, among males, those in care, those experiencing illness in the home, and those experiencing two or more childhood adversities were more likely to be permanently sick at 55 years. Childhood factors were also associated with part-time employment and retirement at 55 years. Severe childhood adversities may represent important distal predictors of labour force exit at 55 years, particularly via permanent sickness. Notably, some adversities show associations among males only, which may inform interventions designed to extend working lives. Copyright © 2017 Elsevier Ltd. All rights reserved.

Regional-Scale Forcing and Feedbacks from Alternative Scenarios of Global-Scale Land Use Change

NASA Astrophysics Data System (ADS)

Jones, A. D.; Chini, L. P.; Collins, W.; Janetos, A. C.; Mao, J.; Shi, X.; Thomson, A. M.; Torn, M. S.

2011-12-01

Future patterns of land use change depend critically on the degree to which terrestrial carbon management strategies, such as biological carbon sequestration and biofuels, are utilized in order to mitigate global climate change. Furthermore, land use change associated with terrestrial carbon management induces biogeophysical changes to surface energy budgets that perturb climate at regional and possibly global scales, activating different feedback processes depending on the nature and location of the land use change. As a first step in a broader effort to create an integrated earth system model, we examine two scenarios of future anthropogenic activity generated by the Global Change Assessment Model (GCAM) within the full-coupled Community Earth System Model (CESM). Each scenario stabilizes radiative forcing from greenhouse gases and aerosols at 4.5 W/m^2. In the first, stabilization is achieved through a universal carbon tax that values terrestrial carbon equally with fossil carbon, leading to modest afforestation globally and low biofuel utilization. In the second scenario, stabilization is achieved with a tax on fossil fuel and industrial carbon alone. In this case, biofuel utilization increases dramatically and crop area expands to claim approximately 50% of forest cover globally. By design, these scenarios exhibit identical climate forcing from atmospheric constituents. Thus, differences among them can be attributed to the biogeophysical effects of land use change. In addition, we utilize offline radiative transfer and offline land model simulations to identify forcing and feedback mechanisms operating in different regions. We find that boreal deforestation has a strong climatic signature due to significant albedo change coupled with a regional-scale water vapor feedback. Tropical deforestation, on the other hand, has more subtle effects on climate. Globally, the two scenarios yield warming trends over the 21st century that differ by 0.5 degrees Celsius. This work demonstrates the importance of land use in shaping future patterns of climate change, both globally and regionally.

Joint Operating Environment: The Joint Force in a Contested and Disordered World

DTIC Science & Technology

2016-07-14

spilling over borders, and creating wide-ranging international problems. The future of Science, Technology, and Engineering will see others reaching...10 Science, Technology, and Engineering and the Future Joint Force ..........................................15 Summary... Engineering – may lead to new and challenging conditions that will redefine the security environment of 2035.  Section 2: Contexts of Future Conflict

Future Directions of Nonlinear Dynamics in PhysicaL and Biological Systems,

DTIC Science & Technology

1992-01-01

ACKNOWLEDGEMENT This work has been supported in part by the Air Force Office of Scientific Research through Grant No. AFOSR-89-0510 and by NWSC, Crane ...Biological Systemr Edied by PL. Cbhsius et a., Plenu= Press, New York, 1993 121 with the stress tensor (TMm,) having components TMrm ` SYM nNtnN + I...transparent. This also implies that Nt= N, - N where N = N1=1 is the usual boson number operator. It is worth stressing that the notion of q-hermiticity

Lac Qui Parle Flood Control Project Master Plan for Public Use Development and Resource Management.

DTIC Science & Technology

1980-08-01

the project area is the disposal of dead carp. Minnesota fishing regulations prohibit fishermen from returning rough fish to lakes or rivers after...in trash cans. Unless the dead fish are removed virtually daily, they begin to decompose and smell. Due to current work- force constraints, the Corps...is unable to remove the dead fish as often as it would like. No easy solution to this problem is apparent. 6.25 Potential for Future Development The

French MALE UAV Program

DTIC Science & Technology

2003-09-02

ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) MoD- France 8...1French Air Force MINISTÈRE DE LA DÉFENSE 1 SIDM CONOPS 2 FAF IMAGERY ARCHITECTURE 3 FUTURE FRENCH MALE UAV PROGRAM FRENCH MALE UAV PROGRAM Report...2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE French Male UAV Program 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

Design Optimization of Systems Governed by Partial Differential Equations. Phase 1

DTIC Science & Technology

1989-03-01

DIFFERENTIAL EQUATIONS" SUBMITTED TO: AIR FORCE OFFICE OF SCIENTIFIC RESEARCH AFOSR/NM ATTN: Major James Crowley BUILDING 410, ROOM 209 BOLLING AFB, DC 20332...of his algorithms called DELIGHT. We consider this work to be of signal importance for the future of all engineer- ing design optimization. Prof...to be set up in a subroutine, which would be called by the optimization code. We then intended to pursue a slow and orderly progression of the problem

Navy CG(X) Cruiser Program: Background, Oversight Issues, and Options for Congress

DTIC Science & Technology

2009-12-22

and Options for Congress 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e . TASK NUMBER 5f. WORK...press report (Katherine McIntire Peters, “Navy’s Top Officer Sees Lessons in Shipbuilding Program Failures,” GovernmentExecutive.com, September 24, 2008...changes would have led to a bigger problem—a future surface combatant force that was both unaffordable and poorly aligned with projected mission needs

United States Air Force Summer Research Program 1991. Graduate Student Research Program (GSRP) Reports. Volume 7. Phillips Laboratory, Civil Engineering Laboratory

DTIC Science & Technology

1992-01-09

community and should form an impetus for future work in this rapidly developing field. SUMMARY A powerful experimental technique, that of X-ray...appropriate solar radiation absorption properties must be mixed with the hydrogen. Studies have been made which show the alkali metals to be powerful ...deposition of carbon. The treated substrates were placed in a tube furnace through which an acetylene-hydrogen or propane-hydrogen mixture flowed

“Hidden” threats to science education

NASA Astrophysics Data System (ADS)

Huntoon, J. E.; Buchanan, R.; Buhr, S. M.; Kirst, S.; Newton, S.; Van Norden, W.

2012-04-01

Many readers of Eos are involved with education. Most would agree that what happens at precollege levels will ultimately affect the geoscience profession; after all, future scientists are today's precollege students. While a growing number of scientists are working to improve the quality of precollege programs, only a few are addressing what we term the "hidden" threats to science education. Hidden threats have nothing to do with scientific content; rather, they result from social, political, and bureaucratic forces operating within and outside of schools and universities.

Why companies should intervene: a case study of the costs of HIV / AIDS to employers. Economic impact: Southern Africa.

PubMed

Greener, R

1998-04-01

5 member companies of the Botswana Business Coalition on AIDS (BBCA) in the manufacturing, transport, distribution, and finance sectors participated in a pilot study of the impact of HIV/AIDS upon companies in Botswana. The study was conducted on behalf of the Botswana National Task Force on AIDS in the Workplace, and involved both management and employee teams from the participating companies. While HIV is usually not spread in the course of work, company characteristics such as having a mobile, well-paid work force, poor housing, or a high community HIV prevalence may increase employees' susceptibility to contracting and transmitting HIV. Companies' susceptibility to the impact of the HIV/AIDS epidemic was assessed through interviews with management and employees. The transport sector was at highest risk, while the finance sector was at lowest risk. Assessing the HIV/AIDS impact, lost labor time due to sick leave, the costs of other benefits, future HIV/AIDS cases and health costs, and regional comparisons of the HIV/AIDS impact are considered. The most significant HIV/AIDS-related cost to the businesses in this study is the cost of lost work time due to employee illness.

Climate Change Detection and Attribution of Infrared Spectrum Measurements

NASA Technical Reports Server (NTRS)

Phojanamongkolkij, Nipa; Parker, Peter A.; Mlynczak, Martin G.

2012-01-01

Climate change occurs when the Earth's energy budget changes due to natural or possibly anthropogenic forcings. These forcings cause the climate system to adjust resulting in a new climate state that is warmer or cooler than the original. The key question is how to detect and attribute climate change. The inference of infrared spectral signatures of climate change has been discussed in the literature for nearly 30 years. Pioneering work in the 1980s noted that distinct spectral signatures would be evident in changes in the infrared radiance emitted by the Earth and its atmosphere, and that these could be observed from orbiting satellites. Since then, a number of other studies have advanced the concepts of spectral signatures of climate change. Today the concept of using spectral signatures to identify and attribute atmospheric composition change is firmly accepted and is the foundation of the Climate Absolute Radiance and Refractivity Observatory (CLARREO) satellite mission being developed at NASA. In this work, we will present an overview of the current climate change detection concept using climate model calculations as surrogates for climate change. Any future research work improving the methodology to achieve this concept will be valuable to our society.

Transonic and supersonic ground effect aerodynamics

NASA Astrophysics Data System (ADS)

Doig, G.

2014-08-01

A review of recent and historical work in the field of transonic and supersonic ground effect aerodynamics has been conducted, focussing on applied research on wings and aircraft, present and future ground transportation, projectiles, rocket sleds and other related bodies which travel in close ground proximity in the compressible regime. Methods for ground testing are described and evaluated, noting that wind tunnel testing is best performed with a symmetry model in the absence of a moving ground; sled or rail testing is ultimately preferable, though considerably more expensive. Findings are reported on shock-related ground influence on aerodynamic forces and moments in and accelerating through the transonic regime - where force reversals and the early onset of local supersonic flow is prevalent - as well as more predictable behaviours in fully supersonic to hypersonic ground effect flows.

The future is no longer what it used to be. Managing health telematics projects.

PubMed

Demeester, M; Beuscart, R

1997-09-01

Future used to mean global progress and convergence of science and technology and society. Today, we observe the decoupling of the two poles of knowledge formation and application (i.e. science and technology, and culture and society, respectively) and also fierce confrontation between them. The key issue to reconcile the two poles is to re-invent the link between them. The new future lies in the development of mental and technical capacities for change and the creation of new forms of solidarity. We propose, as a general attitude, to reactivate and develop the four principles of efficacy-effectiveness-efficiency, hospitality, responsibility and pertinence. Translated into driving forces for the development of health care telematic projects, they amount to the acceptance of and capacity for enterprise-wide solutions, hospitality and capacity to acquire outside knowledge, self-managed, multi-functional team work spirit, reengineering mentality to achieve pertinent technico-cultural solutions.

Silicon-Germanium Fast Packet Switch Developed for Communications Satellites

NASA Technical Reports Server (NTRS)

Quintana, Jorge A.

1999-01-01

Emerging multimedia applications and future satellite systems will require high-speed switching networks to accommodate high data-rate traffic among thousands of potential users. This will require advanced switching devices to enable communication between satellites. The NASA Lewis Research Center has been working closely with industry to develop a state-of-the-art fast packet switch (FPS) to fulfill this requirement. Recently, the Satellite Industry Task Force identified the need for high-capacity onboard processing switching components as one of the "grand challenges" for the satellite industry in the 21st century. In response to this challenge, future generations of onboard processing satellites will require low power and low mass components to enable transmission of services in the 100 gigabit (1011 bits) per second (Gbps) range.

The Road to Information Dominance: "System of Systems" Concept for the United States Armed Forces.

DTIC Science & Technology

1998-04-06

information dominance through the U.S. Armed Forces "System of Systems" concept. It addresses and analyzes current and future strategic implications and requirements for U.S. warfighting communications and information systems. It proposes a more flexible, reliable, responsive, robust and survivable high capacity throughput communications and "bitways" system to support future force projection operations for the Force and/or Army After Next. Lastly, it concludes with a suggested methodology to implement the "System of Systems" concept to enable

14th International Congress on Antiphospholipid Antibodies Task Force Report on Catastrophic Antiphospholipid Syndrome.

PubMed

Cervera, Ricard; Rodríguez-Pintó, Ignasi; Colafrancesco, Serena; Conti, Fabrizio; Valesini, Guido; Rosário, Cristina; Agmon-Levin, Nancy; Shoenfeld, Yehuda; Ferrão, Claudia; Faria, Raquel; Vasconcelos, Carlos; Signorelli, Flavio; Espinosa, Gerard

2014-07-01

The 'Task Force on Catastrophic Antiphospholipid Syndrome (CAPS)' was developed on the occasion of the 14th International Congress on Antiphospholipid Antibodies. The objectives of this Task Force were to assess the current knowledge on pathogenesis, clinical and laboratory features, diagnosis and classification, precipitating factors and treatment of this condition in order to address recommendations for future research. This article summarizes the studies analyzed by the Task Force, its recommendations and the future research agenda. Copyright © 2014 Elsevier B.V. All rights reserved.

Love of Science Began at Early Age for Air Force Captain | DoDLive

Science.gov Websites

advice: "I emphasize early math, as much math as you can take." So what does the future hold avoidance technologies program, Capt. Heather Stickney, Force of the Future, math, science, STEM, Wright

Military duty: risk factor for preterm labor? A review.

PubMed

McNeary, A M; Lomenick, T S

2000-08-01

The female military population represents a high-risk group for preterm labor and other adverse pregnancy outcomes. As the number of women entering the armed forces continues to increase, concerns regarding the effects of military service on pregnancy must persist. Although active duty females have access to prenatal care and maintain consistent follow-up, previous research has noted a 5-fold increase in preterm labor compared with civilian working women. Hospitalization and loss of work attributable to pregnancy complications directly affect productivity and mission accomplishment; therefore, it is crucial to identify those at risk to institute measures that will prevent such occurrences and decrease time away from work. This article provides a review of the existing literature concerning preterm labor in military women, comparisons with the civilian population, and recommendations for future research.

MP-Pic simulation of CFB riser with EMMS-based drag model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, F.; Song, F.; Benyahia, S.

2012-01-01

MP-PIC (multi-phase particle in cell) method combined with the EMMS (energy minimization multi- scale) drag force model was implemented with the open source program MFIX to simulate the gas–solid flows in CFB (circulatingfluidizedbed) risers. Calculated solid flux by the EMMS drag agrees well with the experimental value; while the traditional homogeneous drag over-predicts this value. EMMS drag force model can also predict the macro-and meso-scale structures. Quantitative comparison of the results by the EMMS drag force model and the experimental measurements show high accuracy of the model. The effects of the number of particles per parcel and wall conditions onmore » the simulation results have also been investigated in the paper. This work proved that MP-PIC combined with the EMMS drag model can successfully simulate the fluidized flows in CFB risers and it serves as a candidate to realize real-time simulation of industrial processes in the future.« less

Parenting work and autism trajectories of care.

PubMed

Singh, Jennifer S

2016-09-01

This study investigates the work and care associated with raising a child with disabilities in the United States. Based on in-depth interviews with parents who have a child with autism, it develops the notion of parenting work and trajectories of care to investigate how parents navigate and coordinate the challenges of getting an autism diagnosis, obtaining educational services, and re-contextualising the possibilities for the future. I argue that parents embody a complex mix of love, hope, and responsibility in parenting work and trajectories of care that expands temporal and social elements of illness work and trajectories initially developed by Anselm Strauss and colleagues. This type of parenting work changes over time and is influenced by social structural forces and relationships in which the care takes place. The re-articulation of these analytic tools also begins to untangle the intricate mix of both medical and social models of disability that parents embrace and continuously negotiate. This study demonstrates how parents accept the medical model of disability by seeking and pushing for a clinical autism diagnosis and subsequent treatments, while at the same time challenge the limits placed on their children by providing them with opportunities, possible futures, and a sense of personhood. A Virtual Abstract of this paper can be accessed at: https://www.youtube.com/watch?v=x0UmGvpcjeQ. © 2016 Foundation for the Sociology of Health & Illness.

Nursing Education Transformation: Promising Practices in Academic Progression.

PubMed

Gorski, Mary Sue; Farmer, Patricia D; Sroczynski, Maureen; Close, Liz; Wortock, Jean M

2015-09-01

Health care has changed over the past decade; yet, nursing education has not kept pace with social and scientific advances. The Institute of Medicine report, The Future of Nursing: Leading Change, Advancing Health, called for a more highly educated nursing work-force and an improved nursing education system. Since the release of that report, the Future of Nursing: Campaign for Action, supported by the Robert Wood Johnson Foundation, AARP, and the AARP Foundation, has worked with nursing education leaders to better understand existing and evolving nursing education structures. Through a consensus-building process, four overarching promising practice models, with an emphasis on seamless academic progression, emerged to advance the goals of education transformation. Key nurse educators and other stakeholders refined those models through a series of meetings, collaborative partnerships, and focused projects that were held across the United States. This article summarizes that process and provides a description of the models, challenges, common themes, recommendations, and progress to date. Copyright 2015, SLACK Incorporated.

REDUCTIONS WITHOUT REGRET: DEFINING THE NEEDED CAPABILITIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swegle, J.; Tincher, D.

This is the second of three papers (in addition to an introductory summary) aimed at providing a framework for evaluating future reductions or modifications of the U.S. nuclear force, first by considering previous instances in which nuclear-force capabilities were eliminated; second by looking forward into at least the foreseeable future at the features of global and regional deterrence (recognizing that new weapon systems currently projected will have expected lifetimes stretching beyond our ability to predict the future); and third by providing examples of past or possible undesirable outcomes in the shaping of the future nuclear force, as well as somemore » closing thoughts for the future. This paper begins with a discussion of the current nuclear force and the plans and procurement programs for the modernization of that force. Current weapon systems and warheads were conceived and built decades ago, and procurement programs have begun for the modernization or replacement of major elements of the nuclear force: the heavy bomber, the air-launched cruise missile, the ICBMs, and the ballistic-missile submarines. In addition, the Nuclear Weapons Council has approved a new framework for nuclear-warhead life extension not fully fleshed out yet that aims to reduce the current number of nuclear explosives from seven to five, the so-called 3+2 vision. This vision includes three interoperable warheads for both ICBMs and SLBMs (thus eliminating one backup weapon) and two warheads for aircraft delivery (one gravity bomb and one cruise-missile, eliminating a second backup gravity bomb). This paper also includes a discussion of the current and near-term nuclear-deterrence mission, both global and regional, and offers some observations on future of the strategic deterrence mission and the challenges of regional and extended nuclear deterrence.« less

Is American business working for the poor?

PubMed

Bane, M J; Ellwood, D T

1991-01-01

At first glance, poverty seems to have little to do with business. When most people--managers included--think about poverty, they assume that people are poor because they are isolated from the mainstream economy, not productive participants in it. But according to Harvard University professors Mary Jo Bane and David Ellwood, this is a misleading image of the true face of poverty in the United States today. Most poor adults--and a full 90% of poor children--live in families where work is the norm, not the exception. Poor people often work or want to work. But at the low-wage end of the American economy, having a job is no guarantee of avoiding poverty. Poverty is a business issue, then, because the American poor are part of the American work force. And this poses a problem for managers. In a more competitive and fast-changing economic environment, the performance of companies increasingly depends on the capabilities of their employees. In response to this human-resource challenge, more and more managers are embracing the language of "empowerment". And yet how can low-wage employees believe empowerment when their experience of work is, quite literally, impoverishment? It is unlikely that American companies can create the work force of the future with the poverty policies of the past. Fortunately, there are some simple policy mechanisms that can assist the working poor without putting an undue burden on business. Enacting them, however, requires managers to see poverty policy as one part of a national human-resource strategy that links the strategic concerns of companies to a broad social agenda.

Looking to the Future of the Air Force Nuclear Enterprise

DTIC Science & Technology

2016-09-01

DISTRIBUTION UNLIMITED. The views expressed in this thesis are those of the author and do not reflect the...take to move to the future. This thesis seeks to answer the following question: Examining the Air Force Nuclear Enterprise from its inception in

The New Work Force. Trends and Issues Alerts.

ERIC Educational Resources Information Center

Imel, Susan

During the last years of this century, the work force will grow more slowly, becoming older, more female, and more disadvantaged. An increasing number of minority groups and immigrants will enter the work force. Despite public demands for reform, education lags behind in preparing youth for employment. The changing work force has many implications…

Contributions of different bias-correction methods and reference meteorological forcing data sets to uncertainty in projected temperature and precipitation extremes

NASA Astrophysics Data System (ADS)

Iizumi, Toshichika; Takikawa, Hiroki; Hirabayashi, Yukiko; Hanasaki, Naota; Nishimori, Motoki

2017-08-01

The use of different bias-correction methods and global retrospective meteorological forcing data sets as the reference climatology in the bias correction of general circulation model (GCM) daily data is a known source of uncertainty in projected climate extremes and their impacts. Despite their importance, limited attention has been given to these uncertainty sources. We compare 27 projected temperature and precipitation indices over 22 regions of the world (including the global land area) in the near (2021-2060) and distant future (2061-2100), calculated using four Representative Concentration Pathways (RCPs), five GCMs, two bias-correction methods, and three reference forcing data sets. To widen the variety of forcing data sets, we developed a new forcing data set, S14FD, and incorporated it into this study. The results show that S14FD is more accurate than other forcing data sets in representing the observed temperature and precipitation extremes in recent decades (1961-2000 and 1979-2008). The use of different bias-correction methods and forcing data sets contributes more to the total uncertainty in the projected precipitation index values in both the near and distant future than the use of different GCMs and RCPs. However, GCM appears to be the most dominant uncertainty source for projected temperature index values in the near future, and RCP is the most dominant source in the distant future. Our findings encourage climate risk assessments, especially those related to precipitation extremes, to employ multiple bias-correction methods and forcing data sets in addition to using different GCMs and RCPs.

The Future of Indigenous Security Force Training: Considerations for the Joint Operational Commander

DTIC Science & Technology

2007-11-06

FINAL 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE The Future of Indigenous Security Force Training: 5a. CONTRACT NUMBER...focus on indigenous security force training and development (ISFTD) is unique to OIF or if it foreshadows a requirement that must be addressed in...operational plans using ad hoc capabilities. This research paper seeks to demonstrate that the U.S. military has an increased need to train indigenous

[Impact and forecasting of hepatitis A immunization in French armed forces, 1990-2004].

PubMed

Richard, V; Haus, R; Verret, C; Molinier, S; Hugard, L; Nicand, E; Spiegel, A; Buisson, Y

2006-10-01

Hepatitis A is a public health problem specially for migrants or travellers from industrialized countries with a low hepatitis A endemic level. French armed forces adopted an immunization strategy which first targeted overseas forces and subsequently was extended to all armed forces. In this work we studied the impact of this policy. Epidemiological surveillance data from 1990 to 2004 was analyzed by Poisson regression and exponential models of decrease used to forecast future rates. From the 826 cases of hepatitis A reported during the study period, 266 (32.2%) occurred in overseas forces and 560 (67.8%) in forces stationed in France. Three periods could be identified in the decline of annual incidence: before 1994, with an average rate of 23.2 per 100,000; from 1994 to 1998: 10.2; and after 1998: 1.2 for all French armed forces. For overseas armed forces, the average rate was 117 per 100,000 before 1994 and 17.1 from 1994 to 1998 (p<0.001). For armed forces stationed in France, the average rate was 12.2 per 100,000 before 1998 and 0.9 after (p<0.001). For overseas armed forces, models clearly described the declining incidence subsequent to targeted immunization in 1995 and for armed forces stationed in France, the decline with generalized immunization starting in 1998. The impact of immunization against hepatitis A virus was significant both in an overseas population and in a population staying in France where the risk level can be considered low due to the low endemic rate in France. These results suggest that immunization should be proposed not only for travellers but also for the general population based on real knowledge of the situation and cost-effectiveness analyses.

Climate Simulations of Past, Present and Future

NASA Technical Reports Server (NTRS)

Hansen, James E.

1999-01-01

The forcings that drive long-term climate change are not known with an accuracy sufficient to define future climate change. Anthropogenic greenhouse gases (GHGs), which are well measured, cause a strong positive (warming) forcing. But other, poorly measured, anthropogenic forcings, especially changes of atmospheric aerosols, clouds, and land-use patterns, cause a negative forcing that tends to offset greenhouse warming. One consequence of this partial balance is that the natural forcing due to solar irradiance changes may play a larger role in long-term climate change than inferred from comparison with GHGs alone. Current trends in GHG climate forcings are smaller than in popular "business as usual" or 1% per year CO2 growth scenarios. The summary implication is a paradigm change for long-term climate projections: uncertainties in climate forcings have supplanted global climate sensitivity as the predominant issue.

A future without health? Health dimension in global scenario studies.

PubMed Central

Martens, Pim; Huynen, Maud

2003-01-01

This paper reviews the health dimension and sociocultural, economic, and ecological determinants of health in existing global scenario studies. Not even half of the 31 scenarios reviewed gave a good description of future health developments and the different scenario studies did not handle health in a consistent way. Most of the global driving forces of health are addressed adequately in the selected scenarios, however, and it therefore would have been possible to describe the future developments in health as an outcome of these multiple driving forces. To provide examples on how future health can be incorporated in existing scenarios, we linked the sociocultural, economic, and environmental developments described in three sets of scenarios (special report on emission scenarios (SRES), global environmental outlook-3 (GEO3), and world water scenarios (WWS)) to three potential, but imaginary, health futures ("age of emerging infectious diseases", "age of medical technology", and "age of sustained health"). This paper provides useful insights into how to deal with future health in scenarios and shows that a comprehensive picture of future health evolves when all important driving forces and pressures are taken into account. PMID:14997242

IMAGE: Simulation for Understanding Complex Situations and Increasing Future Force Agility

DTIC Science & Technology

2008-12-01

IMAGE: SIMULATION FOR UNDERSTANDING COMPLEX SITUATIONS AND INCREASING FUTURE FORCE AGILITY Michel Lizotte, François Bernier, Marielle Mokhtari ...Valcartier TM, 2008. [Bernier et al., 2007] Bernier, F., Boivin, E., DuCharme, M., Lizotte, M., Mokhtari , M., Pestov, I., and Pous- sart, D., Selection

Occupational health and safety issues among nurses in the Philippines.

PubMed

de Castro, A B; Cabrera, Suzanne L; Gee, Gilbert C; Fujishiro, Kaori; Tagalog, Eularito A

2009-04-01

Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety.

The effect of alternative work arrangements on women's well-being: a demand-control model.

PubMed

Kelloway, E K; Gottlieb, B H

1998-01-01

The growth of women's participation in the labor force and evidence of the conflict they experience between job and family demands have spurred many employers to introduce alternative work arrangements such as flextime, job sharing, and telecommuting. Drawing on data gained from a sample of women (N = 998) in two large Canadian organizations, this study evaluates two mediational models of the impact of alternative work arrangements on women's stress and family role competence. Specifically, it tests and finds support for the hypotheses that (a) work arrangements involving scheduling flexibility (telecommuting and flextime) promote these aspects of women's well-being by increasing their perceived control over their time, and (b) arrangements involving reduced hours of employment (part-time employment and job sharing) promote well-being by reducing perceived job overload. Discussion of these findings centers on their implications for employed women, their employers, and future research.

Breast cancer treatment and work disability: patient perspectives.

PubMed

Tiedtke, Corine; Dierckx de Casterlé, Bernadette; de Rijk, Angelique; Christiaens, Marie-Rose; Donceel, Peter

2011-12-01

Most female breast cancer patients are forced to interrupt their professional activities during treatment. Qualitative research was carried out to assess women's experiences of being work disabled because of breast cancer. In-depth interviews were analyzed to understand patient's experiences and to gain more insight in their perspectives on living with breast cancer. We identified a 'three-experience model': (1) disruption, with the feeling of irreparable loss, despair and no hope for the future; (2) episode, an unpleasant and inconvenient period, after which life continues as before; and/or (3) meaningful period, during which new life priorities' are set. The different experiences will require different types of support, especially concerning communication around disability and returning to work. Our findings highlight the need of an individual approach of the management of work disability for breast cancer patients. Copyright © 2011 Elsevier Ltd. All rights reserved.

Occupational Health and Safety Issues Among Nurses in the Philippines

PubMed Central

de Castro, A. B.; Cabrera, Suzanne L.; Gee, Gilbert C.; Fujishiro, Kaori; Tagalog, Eularito A.

2009-01-01

Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety. PMID:19438081

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

48 CFR 252.223-7004 - Drug-free work force.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Drug-free work force. 252... Provisions And Clauses 252.223-7004 Drug-free work force. As prescribed in 223.570-2, use the following clause: Drug-Free Work Force (SEP 1988) (a) Definitions. (1) Employee in a sensitive position, as used in...

40 CFR 35.936-14 - Force account work.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Force account work. 35.936-14 Section... Force account work. (a) A grantee must secure the project officer's prior written approval for use of the force account method for (1) any step 1 or step 2 work in excess of $10,000; (2) any sewer...

Unfolding DNA condensates produced by DNA-like charged depletants: A force spectroscopy study

NASA Astrophysics Data System (ADS)

Lima, C. H. M.; Rocha, M. S.; Ramos, E. B.

2017-02-01

In this work, we have measured, by means of optical tweezers, forces acting on depletion-induced DNA condensates due to the presence of the DNA-like charged protein bovine serum albumin (BSA). The stretching and unfolding measurements performed on the semi-flexible DNA chain reveal (1) the softening of the uncondensed DNA contour length and (2) a mechanical behavior strikingly different from those previously observed: the force-extension curves of BSA-induced DNA condensates lack the "saw-tooth" pattern and applied external forces as high as ≈80 pN are unable to fully unfold the condensed DNA contour length. This last mechanical experimental finding is in agreement with force-induced "unpacking" detailed Langevin dynamics simulations recently performed by Cortini et al. on model rod-like shaped condensates. Furthermore, a simple thermodynamics analysis of the unfolding process has enabled us to estimate the free energy involved in the DNA condensation: the estimated depletion-induced interactions vary linearly with both the condensed DNA contour length and the BSA concentration, in agreement with the analytical and numerical analysis performed on model DNA condensates. We hope that future additional experiments can decide whether the rod-like morphology is the actual one we are dealing with (e.g. pulling experiments coupled with super-resolution fluorescence microscopy).

Magnetic Actuator Modelling for Rotating Machinery Analysis

NASA Astrophysics Data System (ADS)

Mendes, Ricardo Ugliara; de Castro, Hélio Fiori; Cavalca, Kátia Lucchesi; Ferreira, Luiz Otávio Saraiva

Rotating machines have a wide range of application such as airplanes, factories, laboratories and power plants. Lately, with computer aid design, shafts finite element models including bearings, discs, seals and couplings have been developed, allowing the prediction of the machine behavior. In order to keep confidence during operation, it is necessary to monitor these systems, trying to predict future failures. One of the most applied technique for this purpose is the modal analysis. It consists of applying a perturbation force into the system and then to measure its response. However, there is a difficulty that brings limitations to the excitation of systems with rotating shafts when using impact hammers or shakers, once due to friction, undesired tangential forces and noise can be present in the measurements. Therefore, the study of a non-contact technique of external excitation becomes of high interest. In this sense, the present work deals with the study and development of a finite element model for rotating machines using a magnetic actuator as an external excitation source. This work also brings numerical simulations where the magnetic actuator was used to obtain the frequency response function of the rotating system.

Mechanical pressure and momentum conservation in dry active matter

NASA Astrophysics Data System (ADS)

Fily, Y.; Kafri, Y.; Solon, A. P.; Tailleur, J.; Turner, A.

2018-01-01

We relate the breakdown of equations of states (EOS) for the mechanical pressure of generic dry active systems to the lack of momentum conservation in such systems. We show how net sources and sinks of momentum arise generically close to confining walls. These typically depend on the interactions of the container with the particles, which makes the mechanical pressure a container-dependent quantity. We show that an EOS is recovered if the dynamics of the propulsive forces of the particles are decoupled from other degrees of freedom and lead to an apolar bulk steady-state. This recovery of an EOS stems from the mean steady-state active force density being the divergence of the flux of ‘active impulse’, an observable which measures the mean momentum particles will receive from the substrate in the future. ), which features invited work from the best early-career researchers working within the scope of J. Phys. A. This project is part of the Journal of Physics series’ 50th anniversary celebrations in 2017. Julien Tailleur was selected by the Editorial Board of J. Phys. A as an Emerging Talent.

Comparing the risk of work-related injuries between immigrants to Canada and Canadian-born labour market participants.

PubMed

Smith, P M; Mustard, C A

2009-06-01

To examine the burden of work-related injuries among immigrants to Canada compared to Canadian-born labour force participants. Using data from the 2003 and 2005 Canadian Community Health Surveys (n = 99,115), two nationally representative population samples, we examined the risk of self-reported, activity limiting work-related injuries among immigrants with varying time periods since arrival in Canada. Models were adjusted for hours of work in the last 12 months as well as various demographic and work-related variables. Immigrant men in their first 5 years in Canada reported lower rates of activity limiting injuries compared to Canadian-born respondents. Surprisingly, the percentage of injuries that required medical attention was much higher among recent immigrants compared to Canadian-born respondents, resulting in an increased risk of activity limiting injuries requiring medical attention among immigrant men compared to Canadian-born labour force participants. No excess risk was found among female immigrants compared to Canadian-born female labour market participants. Immigrant men in their first 5 years in Canada are at increased risk of work-related injuries that require medical attention. A similar risk is not present among immigrant women. Further, given differences in the number of activity limiting injuries requiring medical attention across immigrant groups, we believe this excess risk among immigrant men may be underestimated in the current data source. Future research should attempt to fully capture the barriers faced by immigrants in obtaining safe employment, the number of injuries that are sustained by immigrants while working, and the consequences of these injuries.

Force and Conductance Spectroscopy of Single Molecule Junctions

NASA Astrophysics Data System (ADS)

Frei, Michael

Investigation of mechanical properties of single molecule junctions is crucial to develop an understanding and enable control of single molecular junctions. This work presents an experimental and analytical approach that enables the statistical evaluation of force and simultaneous conductance data of metallic atomic point contacts and molecular junctions. A conductive atomic force microscope based break junction technique is developed to form single molecular junctions and collect conductance and force data simultaneously. Improvements of the optical components have been achieved through the use of a super-luminescent diode, enabling tremendous increases in force resolution. An experimental procedure to collect data for various molecular junctions has been developed and includes deposition, calibration, and analysis methods. For the statistical analysis of force, novel approaches based on two dimensional histograms and a direct force identification method are presented. The two dimensional method allows for an unbiased evaluation of force events that are identified using corresponding conductance signatures. This is not always possible however, and in these situations, the force based identification of junction rearrangement events is an attractive alternative method. This combined experimental and analytical approach is then applied to three studies: First, the impact of molecular backbones to the mechanical behavior of single molecule junctions is investigated and it is found that junctions formed with identical linkers but different backbone structure result in junctions with varying breaking forces. All molecules used show a clear molecular signature and force data can be evaluated using the 2D method. Second, the effects of the linker group used to attach molecules to gold electrodes are investigated. A study of four alkane molecules with different linkers finds a drastic difference in the evolution of donor-acceptor and covalently bonded molecules respectively. In fact, the covalent bond is found to significantly distort the metal electrode rearrangement such that junction rearrangement events can no longer be identified with a clean and well defined conductance signature. For this case, the force based identification process is used. Third, results for break junction measurements with different metals are presented. It is found that silver and palladium junctions rupture with forces different from those of gold contacts. In the case of silver experiments in ambient conditions, we can also identify oxygen impurities in the silver contact formation process, leading to force and conductance measurements of silver-oxygen structures. For the future, this work provides an experimental and analytical foundation that will enable insights into single molecule systems not previously accessible.

Design of a resistive exercise device for use on the Space Shuttle

NASA Technical Reports Server (NTRS)

Carlson, Dennis L.; Durrani, Mohammed; Redilla, Christi L.

1992-01-01

The National Aeronautics and Space Administration in conjunction with the Universities Space Research Association sponsored the design of a Resistive Exercise Device (RED) for use on the Space Shuttle. The device must enable the astronauts to perform a number of exercises to prevent skeletal muscle atrophy and neuromuscular deconditioning in microgravity environments. The RED must fit the requirements for limited volume and weight and must provide a means of restraint during exercise. The design team divided the functions of the device into three major groups: methods of supplying force, methods of adjusting force, and methods of transmitting the force to the user. After analyzing the three main functions of the RED and developing alternatives for each, the design team used a comparative decision process to choose the most feasible components for the overall design. The design team selected the constant force spring alternative for further embodiment. The device consists of an array of different sized constant force springs which can be pinned in different combinations to produce the required output forces. The force is transmitted by means of a shaft and gear system. The final report is divided into four sections. An introduction section discusses the sponsor background, problem background and requirements of the device. The second section covers the alternative designs for each of the main functions. The design solution and pertinent calculations comprises the third section. The final section contains design conclusions and recommendations including topics of future work.

Work Force Information and Career-Technical Education. In Brief: Fast Facts for Policy and Practice No. 10.

ERIC Educational Resources Information Center

Sommers, Dixie

To prepare young people and adults for labor market success, career-technical education (CTE) practitioners must know how to find and use work force information. Recent federal legislation, including the Workforce Investment Act of 1998, underscores the importance of work force education. The nationwide work force information system makes data on…

A socioecological analysis of the determinants of national public health nutrition work force capacity: Australia as a case study.

PubMed

Hughes, Roger

2006-01-01

This article uses a socioecological analytical approach to assess the capacity of the public health nutrition work force in Australia as a prelude to work force development strategy planning. It demonstrates how the socioecological model can be used to assess and inform the development of the infrastructure required for effective public health nutrition effort. An interpretive case study method was used involving triangular analysis of quantitative and qualitative data from multiple sources including semistructured interviews with advanced-level practitioners, literature review, a cross-sectional national work force survey, and position description audit and consensus development using a Delphi study. The findings of this analysis indicate that the Australian public health nutrition work force's capacity to effectively address priority nutrition issues is limited by determinants that can be categorized as relating to human resource infrastructure, organizational and policy environments, intelligence access and use, practice improvement and learning systems, and work force preparation. This socioecological analysis supports an intelligence-based focus for work force development effort in Australia and a conceptual framework for work force capacity assessment with potential applications in other countries.

Target: Alcohol Abuse in the Hard-to-Reach Work Force. Ideas and Resources for Responding to Problems of the Hard-to-Reach Work Force.

ERIC Educational Resources Information Center

Informatics, Inc., Rockville, MD.

This guide is designed as a source of ideas and information for individuals and organizations interested in occupational alcoholism programs for the hard-to-reach work force. Following a brief overview of the problem and a report on progress in occupational alcoholism programming, a working definition of the hard-to-reach work force is offered;…

Force production and time-averaged flow structure around thin, non-slender delta wings

NASA Astrophysics Data System (ADS)

Tu, Han; Green, Melissa

2017-11-01

Experimental force measurement and time-averaged three dimensional flow visualization of low Reynolds number baseline cases have been carried out on a steady flat plate delta wing. Current data will serve as steady reference for future unsteady flow and actuation cases. The comprehensive study will compare force production in highly unsteady environments, which is necessary to consider in unmanned combat aerial vehicle (UCAV) control strategies. Force measurements are carried out at angles of attack 10, 15, 20, 25 and 30 degrees. The coefficient of drag increases with angle of attack, while the coefficient of lift reaches a maximum value at 20 degrees. Time-averaged flow visualization conducted at angles of attack of 20, 25 and 30 degrees shows vortices with larger magnitude that persist farther into wake are generated at higher angles of attack. These results compare analogously with similar steady baseline experiment results of high Reynolds number conducted by collaborators. This work was supported by the Office of Naval Research under ONR Award No. N00014-16-1-2732. We also acknowledge the collaborative support of Dr. David Rival and Mr. Matthew Marzanek at Queen's University.

Development and testing of a unique carousel wind tunnel to experimentally determine the effect of gravity and the interparticle force on the physics of wind-blown particles

NASA Technical Reports Server (NTRS)

Leach, R. N.; Greeley, Ronald; White, Bruce R.; Iversen, James D.

1987-01-01

In the study of planetary aeolian processes the effect of gravity is not readily modeled. Gravity appears in the equations of particle motion along with the interparticle forces but the two are not separable. A wind tunnel that perimits multiphase flow experiments with wind blown particles at variable gravity was built and experiments were conducted at reduced gravity. The equations of particle motion initiation (saltation threshold) with variable gravity were experimentally verified and the interparticle force was separated. A uniquely design Carousel Wind Tunnel (CWT) allows for the long flow distance in a small sized tunnel since the test section if a continuous loop and develops the required turbulent boundary layer. A prototype model of the tunnel where only the inner drum rotates was built and tested in the KC-135 Weightless Wonder 4 zero-g aircraft. Future work includes further experiments with walnut shell in the KC-135 which sharply graded particles of widely varying median sizes including very small particles to see how interparticle force varies with particle size, and also experiments with other aeolian material.

The International Reference Ionosphere Today and in the Future

NASA Technical Reports Server (NTRS)

Bilitza, Dieter; McKinnell, Lee-Ane; Reinisch, Bodo; Fuller-Rowell,Tim

2010-01-01

The international reference ionosphere (IRI) is the internationally recognized and recommended standard for the specification of plasma parameters in Earth's ionosphere. It describes monthly averages of electron density, electron temperature, ion temperature, ion composition, and several additional parameters in the altitude range from 60 to 1,500 km. A joint working group of the Committee on Space Research (COSPAR) and the International Union of Radio Science (URSI) is in charge of developing and improving the IRI model. As requested by COSPAR and URSI, IRI is an empirical model being based on most of the available and reliable data sources for the ionospheric plasma. The paper describes the latest version of the model and reviews efforts towards future improvements, including the development of new global models for the F2 peak density and height, and a new approach to describe the electron density in the topside and plasmasphere. Our emphasis will be on the electron density because it is the IRI parameter most relevant to geodetic techniques and studies. Annual IRI meetings are the main venue for the discussion of IRI activities, future improvements, and additions to the model. A new special IRI task force activity is focusing on the development of a real-time IRI (RT-IRI) by combining data assimilation techniques with the IRI model. A first RT-IRI task force meeting was held in 2009 in Colorado Springs. We will review the outcome of this meeting and the plans for the future. The IRI homepage is at http://www.IRI.gsfc.nasa.gov

Energetic costs of producing muscle work and force in a cyclical human bouncing task

PubMed Central

Kuo, Arthur D.

2011-01-01

Muscles expend energy to perform active work during locomotion, but they may also expend significant energy to produce force, for example when tendons perform much of the work passively. The relative contributions of work and force to overall energy expenditure are unknown. We therefore measured the mechanics and energetics of a cyclical bouncing task, designed to control for work and force. We hypothesized that near bouncing resonance, little work would be performed actively by muscle, but the cyclical production of force would cost substantial metabolic energy. Human subjects (n = 9) bounced vertically about the ankles at inversely proportional frequencies (1–4 Hz) and amplitudes (15–4 mm), such that the overall rate of work performed on the body remained approximately constant (0.30 ± 0.06 W/kg), but the forces varied considerably. We used parameter identification to estimate series elasticity of the triceps surae tendon, as well as the work performed actively by muscle and passively by tendon. Net metabolic energy expenditure for bouncing at 1 Hz was 1.15 ± 0.31 W/kg, attributable mainly to active muscle work with an efficiency of 24 ± 3%. But at 3 Hz (near resonance), most of the work was performed passively, so that active muscle work could account for only 40% of the net metabolic rate of 0.76 ± 0.28 W/kg. Near resonance, a cost for cyclical force that increased with both amplitude and frequency of force accounted for at least as much of the total energy expenditure as a cost for work. Series elasticity reduces the need for active work, but energy must still be expended for force production. PMID:21212245

BUILDING TRIBAL CAPABILITIES IN ENERGY RESOURCE TRIBES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mary Lopez

2003-04-01

The CERT Tribal Internship Program is part of the education and training opportunities provided by CERT to accelerate the development of American Indian technical professionals available to serve Tribes and expand the pool of these professionals. Tribes are severely impacted by the inadequate number of Indian professionals available to serve and facilitate Tribal participation and support of the energy future of Tribes,and subsequently the energy future of the nation. By providing interns with hands-on work experience in their field of study two goals are accomplished: (1) the intern is provided opportunities for professional enhancement; and (2) The pool of Indianmore » professionals available to meet the needs of Tribal government and Tribal communities in general is increased. As of January 17, 2003, Lance M Wyatt successfully completed his internship with the Interagency Working Group on Environmental Justice on the Task Force that specifically focuses their work on Tribal nations. While working as an intern with the National Transportation Program, Albuquerque operations, Jacqueline Agnew received an offer to work for the Alaska Native Health Board in Anchorage, Alaska. This was an opportunity that Ms. Agnew did not feel she could afford to forego and she left her internship position in February 2003. At present, CERT is in the process of finding another qualified individual to replace the internship position vacated by Ms. Agnew. Mr. Wyatt's and Ms. Agnew's final comments are given.« less

Calibrating the system dynamics of LISA Pathfinder

NASA Astrophysics Data System (ADS)

Armano, M.; Audley, H.; Baird, J.; Binetruy, P.; Born, M.; Bortoluzzi, D.; Castelli, E.; Cavalleri, A.; Cesarini, A.; Cruise, A. M.; Danzmann, K.; de Deus Silva, M.; Diepholz, I.; Dixon, G.; Dolesi, R.; Ferraioli, L.; Ferroni, V.; Fitzsimons, E. D.; Freschi, M.; Gesa, L.; Gibert, F.; Giardini, D.; Giusteri, R.; Grimani, C.; Grzymisch, J.; Harrison, I.; Heinzel, G.; Hewitson, M.; Hollington, D.; Hoyland, D.; Hueller, M.; Inchauspé, H.; Jennrich, O.; Jetzer, P.; Karnesis, N.; Kaune, B.; Korsakova, N.; Killow, C. J.; Lobo, J. A.; Lloro, I.; Liu, L.; López-Zaragoza, J. P.; Maarschalkerweerd, R.; Mance, D.; Meshksar, N.; Martín, V.; Martin-Polo, L.; Martino, J.; Martin-Porqueras, F.; Mateos, I.; McNamara, P. W.; Mendes, J.; Mendes, L.; Nofrarias, M.; Paczkowski, S.; Perreur-Lloyd, M.; Petiteau, A.; Pivato, P.; Plagnol, E.; Ramos-Castro, J.; Reiche, J.; Robertson, D. I.; Rivas, F.; Russano, G.; Slutsky, J.; Sopuerta, C. F.; Sumner, T.; Texier, D.; Thorpe, J. I.; Vetrugno, D.; Vitale, S.; Wanner, G.; Ward, H.; Wass, P.; Weber, W. J.; Wissel, L.; Wittchen, A.; Zweifel, P.

2018-06-01

LISA Pathfinder (LPF) was a European Space Agency mission with the aim to test key technologies for future space-borne gravitational-wave observatories like LISA. The main scientific goal of LPF was to demonstrate measurements of differential acceleration between free-falling test masses at the sub-femto-g level, and to understand the residual acceleration in terms of a physical model of stray forces, and displacement readout noise. A key step toward reaching the LPF goals was the correct calibration of the dynamics of LPF, which was a three-body system composed by two test-masses enclosed in a single spacecraft, and subject to control laws for system stability. In this work, we report on the calibration procedures adopted to calculate the residual differential stray force per unit mass acting on the two test-masses in their nominal positions. The physical parameters of the adopted dynamical model are presented, together with their role on LPF performance. The analysis and results of these experiments show that the dynamics of the system was accurately modeled and the dynamical parameters were stationary throughout the mission. Finally, the impact and importance of calibrating system dynamics for future space-based gravitational wave observatories is discussed.

Impacts of the Convention on Long-range Transboundary Air Pollution on air quality in Europe.

PubMed

Bull, Keith; Johansson, Matti; Krzyzanowski, Michal

2008-01-01

The Convention on Long-range Transboundary Air Pollution has been one of the main ways of protecting the environment in Europe from air pollution. This convention has successfully bridged different political systems even through times of political change, and is a prime example of what can be achieved through intergovernmental cooperation. Through creating an effective framework for controlling and reducing the damage to human health and the environment from transboundary air pollution, this convention has proved successful. This article considers the development of the convention and its work on adverse air pollution effects, in particular on activities related to quantifying effects on human health as carried out by the convention's joint (with WHO) Task Force on the Health Effects of Air Pollution (Task Force on Health), and concludes with some indications of the convention's future priorities.

Accounting for radiative forcing from albedo change in future global land-use scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Andrew D.; Calvin, Katherine V.; Collins, William D.

2015-08-01

We demonstrate the effectiveness of a new method for quantifying radiative forcing from land use and land cover change (LULCC) within an integrated assessment model, the Global Change Assessment Model (GCAM). The method relies on geographically differentiated estimates of radiative forcing from albedo change associated with major land cover transitions derived from the Community Earth System Model. We find that conversion of 1 km² of woody vegetation (forest and shrublands) to non-woody vegetation (crops and grassland) yields between 0 and –0.71 nW/m² of globally averaged radiative forcing determined by the vegetation characteristics, snow dynamics, and atmospheric radiation environment characteristic withinmore » each of 151 regions we consider globally. Across a set of scenarios designed to span a range of potential future LULCC, we find LULCC forcing ranging from –0.06 to –0.29 W/m² by 2070 depending on assumptions regarding future crop yield growth and whether climate policy favors afforestation or bioenergy crops. Inclusion of this previously uncounted forcing in the policy targets driving future climate mitigation efforts leads to changes in fossil fuel emissions on the order of 1.5 PgC/yr by 2070 for a climate forcing limit of 4.5 Wm –2, corresponding to a 12–67 % change in fossil fuel emissions depending on the scenario. Scenarios with significant afforestation must compensate for albedo-induced warming through additional emissions reductions, and scenarios with significant deforestation need not mitigate as aggressively due to albedo-induced cooling. In all scenarios considered, inclusion of albedo forcing in policy targets increases forest and shrub cover globally.« less

Ontogeny of aerodynamics in mallards: comparative performance and developmental implications.

PubMed

Dial, Terry R; Heers, Ashley M; Tobalske, Bret W

2012-11-01

Wing morphology correlates with flight performance and ecology among adult birds, yet the impact of wing development on aerodynamic capacity is not well understood. Recent work using chukar partridge (Alectoris chukar), a precocial flier, indicates that peak coefficients of lift and drag (C(L) and C(D)) and lift-to-drag ratio (C(L):C(D)) increase throughout ontogeny and that these patterns correspond with changes in feather microstructure. To begin to place these results in a comparative context that includes variation in life-history strategy, we used a propeller and force-plate model to study aerodynamic force production across a developmental series of the altricial-flying mallard (Anas platyrhynchos). We observed the same trend in mallards as reported for chukar in that coefficients of vertical (C(V)) and horizontal force (C(H)) and C(V):C(H) ratio increased with age, and that measures of gross-wing morphology (aspect ratio, camber and porosity) in mallards did not account for intraspecific trends in force production. Rather, feather microstructure (feather unfurling, rachis width, feather asymmetry and barbule overlap) all were positively correlated with peak C(V):C(H). Throughout ontogeny, mallard primary feathers became stiffer and less transmissive to air at both macroscale (between individual feathers) and microscale (between barbs/barbules/barbicels) levels. Differences between species were manifest primarily as heterochrony of aerodynamic force development. Chukar wings generated measurable aerodynamic forces early (<8 days), and improved gradually throughout a 100 day ontogenetic period. Mallard wings exhibited delayed aerodynamic force production until just prior to fledging (day 60), and showed dramatic improvement within a condensed 2-week period. These differences in timing may be related to mechanisms of escape used by juveniles, with mallards swimming to safety and chukar flap-running up slopes to take refuge. Future comparative work should test whether the need for early onset of aerodynamic force production in the chukar, compared with delayed, but rapid, change in the mallard wing, leads to a limited repertoire of flight behavior in adult chukar compared with mallards.

Psychological and educational factors: better predictors of work status than FEV1 in adults with cystic fibrosis.

PubMed

Burker, Eileen J; Sedway, Jan; Carone, Stacia

2004-11-01

Now that more individuals with cystic fibrosis (CF) are living into adulthood, vocational attainment is an increasingly important consideration. Work is a key factor in quality of life. The purpose of the present paper was to evaluate the factors that are associated with work status in 183 adults with CF. Approximately half of the participants were working at the time of evaluation, an impressive figure given that the mean forced expired volume in 1 sec (FEV1) was 31.9%. The average number of hours worked was 32.7 hr/week. The majority of individuals were employed in professional, technical, or managerial occupations (accounting, teaching, law, or social work). A third were employed in clerical and sales occupations, and the remaining individuals were employed in a wide range of other occupations (hotel manager, undercover shopper, artist, or dental technician). Interestingly, FEV1 and age did not differentiate between subjects who were working and those who were not. Individuals who were working had significantly lower depression scores and a higher educational level than those who were not working. Future research is needed to determine whether it is the increased socialization and the resulting social support that may come from a work environment, or a reduction in financial stress because of better income and health benefits that helps to explain this difference. Alternatively, work may serve as a distraction from the symptoms of CF. It is likely that those with higher educational levels had more professional jobs that were more easily modified as health declined. Future research needs to assess how career choices are made, and what factors into a patient's decision to keep working. (c) 2004 Wiley-Liss, Inc.

Satellite Communications Using Commercial Protocols

NASA Technical Reports Server (NTRS)

Ivancic, William D.; Griner, James H.; Dimond, Robert; Frantz, Brian D.; Kachmar, Brian; Shell, Dan

2000-01-01

NASA Glenn Research Center has been working with industry, academia, and other government agencies in assessing commercial communications protocols for satellite and space-based applications. In addition, NASA Glenn has been developing and advocating new satellite-friendly modifications to existing communications protocol standards. This paper summarizes recent research into the applicability of various commercial standard protocols for use over satellite and space- based communications networks as well as expectations for future protocol development. It serves as a reference point from which the detailed work can be readily accessed. Areas that will be addressed include asynchronous-transfer-mode quality of service; completed and ongoing work of the Internet Engineering Task Force; data-link-layer protocol development for unidirectional link routing; and protocols for aeronautical applications, including mobile Internet protocol routing for wireless/mobile hosts and the aeronautical telecommunications network protocol.

Length and Dimensional Measurements at NIST

PubMed Central

Swyt, Dennis A.

2001-01-01

This paper discusses the past, present, and future of length and dimensional measurements at NIST. It covers the evolution of the SI unit of length through its three definitions and the evolution of NBS-NIST dimensional measurement from early linescales and gage blocks to a future of atom-based dimensional standards. Current capabilities include dimensional measurements over a range of fourteen orders of magnitude. Uncertainties of measurements on different types of material artifacts range down to 7×10−8 m at 1 m and 8 picometers (pm) at 300 pm. Current work deals with a broad range of areas of dimensional metrology. These include: large-scale coordinate systems; complex form; microform; surface finish; two-dimensional grids; optical, scanning-electron, atomic-force, and scanning-tunneling microscopies; atomic-scale displacement; and atom-based artifacts. PMID:27500015

What We Talk About When We Talk About Drought: Tree-ring Perspectives on Model-Data Comparisons in Hydroclimate Research

NASA Astrophysics Data System (ADS)

Cook, B.; Anchukaitis, K. J.

2017-12-01

Comparative analyses of paleoclimate reconstructions and climate model simulations can provide valuable insights into past and future climate events. Conducting meaningful and quantitative comparisons, however, can be difficult for a variety of reasons. Here, we use tree-ring based hydroclimate reconstructions to discuss some best practices for paleoclimate-model comparisons, highlighting recent studies that have successfully used this approach. These analyses have improved our understanding of the Medieval-era megadroughts, ocean forcing of large scale drought patterns, and even climate change contributions to future drought risk. Additional work is needed, however, to better reconcile and formalize uncertainties across observed, modeled, and reconstructed variables. In this regard, process based forward models of proxy-systems will likely be a critical tool moving forward.

[Research progresses on ergonomics assessment and measurement methods for push-pull behavior].

PubMed

Zhao, Yan; Li, Dongxu; Guo, Shengpeng

2011-10-01

Pushing and pulling (P&P) is a common operating mode of operator's physical works, and plays an important role in evaluation of human behavior health and operation performance. At present, there are many research methods of P&P, and this article is a state-of-art review of the classification of P&P research methods, the various impact factors in P&P program, technical details of internal/external P&P force measurement and evaluation, the limitation of current research methods and the future developments in the ergonomics field.

The Iraq War: Learning from the Past, Adapting to the Present, and Planning for the Future

DTIC Science & Technology

2007-02-01

derive a template for victory from any single campaign or national approach. 4 DEFINING TERMS A public fed a steady diet of suicide bombings and...appointment), Sir Gerald Templer, insisted that committees meet at least once a day, if only for “a whiskey and soda .”27 The system worked well in Malaya and...allowed the insurgency to take root, making it far more difficult to eradicate. Even when U.S. forces became aware of the danger , they had great

Officials mark Landsat fortieth anniversary with look toward the future

NASA Astrophysics Data System (ADS)

Showstack, Randy

2012-07-01

With the first Landsat satellite having launched 40 years ago and the Landsat Data Continuity Mission (LDCM) on track to launch from Vandenberg Air Force Base, Calif., on 11 February 2013, officials from several U.S. federal science agencies took stock of some of the accomplishments of Landsat (the world's longest running Earth-observing satellite program), announced new tools for scientists working with Landsat data, and discussed some of the challenges facing the program during a 23 July briefing at the Newseum in Washington, D. C.

Autonomous System for MISSE Temperature Measurements

NASA Technical Reports Server (NTRS)

Harvey, G. A.; Lash, T. J.; Kinard, W. H.; Bull, K.; deGeest, F.

2001-01-01

The Materials International Space Station Experiment (MISSE) is scheduled to be deployed during the summer of 2001. This experiment is a cooperative endeavor by NASA-LaRC, NASA-GRC, NASA MSFC, NASA-JSC, the Materials Laboratory at the Air Force Research Laboratory, and the Boeing Phantom Works. The objective of the experiment is to evaluate performance, stability, and long term survivability of materials and components planned for use by NASA and DOD on future LEO, synchronous orbit, and interplanetary space missions. Temperature is an important parameter in the evaluation of space environmental effects on materials.

Competitiveness and the Quality of the American Work Force. Hearings before the Subcommittee on Education and Health of the Joint Economic Committee. Congress of the United States, One Hundredth Congress, First Session (October 29, November 10, 19, and December 3, 1987). Part 2.

ERIC Educational Resources Information Center

Joint Economic Committee, Washington, DC.

These four hearings examine the United States educational system and consider its redesign with an eye toward the skill needs of the future. The goal of the hearings is to develop a comprehensive legislative agenda to enable the next Congress and the next administration to take the necessary steps to provide U.S. industries with adequately trained…

One Size Fits All Assessment of the National Space based Intelligence, Surveillance, and Reconnaissance Strategy

DTIC Science & Technology

2010-06-01

segregation. By reframing the problem to focus on competition’s impacts and by assessing the admissibility of solutions in the context of system...community and the joint force commanders. I believe this approach is posing problems , and those problems are going to get worse as we look to the... problems ” which will only “get worse as we look to the future?”14 This work began as an effort to assess the extent to which the current national overhead

Nanophotonic implementation of optoelectrowetting for microdroplet actuation

NASA Astrophysics Data System (ADS)

Collier, Christopher M.; Hill, Kyle A.; DeWachter, Mark A.; Huizing, Alexander M.; Holzman, Jonathan F.

2015-02-01

The development and ultimate operation of a nanocomposite high-aspect-ratio photoinjection (HARP) device is presented in this work. The device makes use of a nanocomposite material as the optically active layer and the device achieves a large optical penetration depth with a high aspect ratio which provides a strong actuation force far away from the point of photoinjection. The nanocomposite material can be continuously illuminated and the position of the microdroplets can, therefore, be controlled to diffraction limited resolution. The nanocomposite HARP device shows great potential for future on-chip applications.

Task Force on Workplace Violence: Part I. The assessment.

PubMed

Carroll, V

1997-06-01

Prevention is key in dealing with workplace violence. Assessment, open communication within the workplace, well-designed policies, and adequate staff training form the framework for an effective violence reduction plan. Nurses offer invaluable resources to each other, their patients. and their workplace. Through effective planning and problem-solving, we can collaborate with other disciplines to enhance the future of health care and provide for a safer workplace. Just as we are advocates for safe and quality health care for our patients, we must also be champions for creating a safe work environment for ourselves.

Energy plan, 1981

NASA Astrophysics Data System (ADS)

1981-12-01

The planning procedures for the energy program and policy guidelines for energy planning are presented. Future changes in marginal costs and directions indicated for economically efficient pricing are assessed. The aim of the conservation program is to close the gap between the amounts of conservation which is rationally cost effective and that projected to occur anyway through normal market forces. An overview of energy demand and proposed plans for energy supply are given. Liquid fuels have priority although work on coal receives new emphasis. A better program on energy demand and management is suggested.

A fingertip force prediction model for grasp patterns characterised from the chaotic behaviour of EEG.

PubMed

Roy, Rinku; Sikdar, Debdeep; Mahadevappa, Manjunatha; Kumar, C S

2018-05-19

A stable grasp is attained through appropriate hand preshaping and precise fingertip forces. Here, we have proposed a method to decode grasp patterns from motor imagery and subsequent fingertip force estimation model with a slippage avoidance strategy. We have developed a feature-based classification of electroencephalography (EEG) associated with imagination of the grasping postures. Chaotic behaviour of EEG for different grasping patterns has been utilised to capture the dynamics of associated motor activities. We have computed correlation dimension (CD) as the feature and classified with "one against one" multiclass support vector machine (SVM) to discriminate between different grasping patterns. The result of the analysis showed varying classification accuracies at different subband levels. Broad categories of grasping patterns, namely, power grasp and precision grasp, were classified at a 96.0% accuracy rate in the alpha subband. Furthermore, power grasp subtypes were classified with an accuracy of 97.2% in the upper beta subband, whereas precision grasp subtypes showed relatively lower 75.0% accuracy in the alpha subband. Following assessment of fingertip force distributions while grasping, a nonlinear autoregressive (NAR) model with proper prediction of fingertip forces was proposed for each grasp pattern. A slippage detection strategy has been incorporated with automatic recalibration of the regripping force. Intention of each grasp pattern associated with corresponding fingertip force model was virtualised in this work. This integrated system can be utilised as the control strategy for prosthetic hand in the future. The model to virtualise motor imagery based fingertip force prediction with inherent slippage correction for different grasp types ᅟ.

Alternative Futures: United States Air Force Security Police in the Twenty-First Century

DTIC Science & Technology

1988-04-01

34What policies should today’s Air Force leadership be pursuing to prepare for tomorrow’s combat support and security police roles?’ The monograph...Further, it addresses the capability of the Air Force to respond to its future combat support and security police missions and their integration into the...security police organizations. His most recent assignments were as the deputy commander of a combat support group and the commander of a security police

Strengthening Sustainability and Resiliency of a Future Force, Phase 1. FY2010-2011 Summer Study

DTIC Science & Technology

2011-03-01

Resiliency of a Future Force: Phase I Interim Report - 48 Please Enter Custom Water factor adjustments below: m Unit Level* (Gat/Ptisan/ Dti ...cost of mov- ing the consumables in terms of the assets required to move the commodity and the security Intra Theater Resupply: 4 Legs Army...Expeditionary Force-Logistics ResupplyDetails Legl Leg 2 Leg 3 Leg 4 Resupply Trip Legs Super FOB (Div)to Base Camp (bde) Base Camp (Bde) to FOB (Bn

The Relationship of Curriculum to School District Organization.

ERIC Educational Resources Information Center

Turner, Harold E.

This paper attempts to place in perspective the necessary relationships between school district organization and the curriculum in today's society. In the first part of the presentation, the author describes some of the forces currently affecting the curriculum and those forces likely to continue making an impact in the future. Future needs…

Maintaining the All Volunteer Army to Meet Future Land Force Challenges

DTIC Science & Technology

2009-03-25

NIC ) Global Trends report5, or the source documents for the Army’s most recently published strategy forecast the future security environment and how the...Forces and others conducting combat operations against Al Qaeda.”32 Tom Ricks later quotes Stephen Biddle , an occasional advisor to General Petreaus – he

The Borderlands and climate change: Chapter 10 in United States-Mexican Borderlands: Facing tomorrow's challenges through USGS science

USGS Publications Warehouse

Fitzpatrick, Joan; Gray, Floyd; Dubiel, Russell; Langman, Jeff; Moring, J. Bruce; Norman, Laura M.; Page, William R.; Parcher, Jean W.

2013-01-01

The prediction of global climate change in response to both natural forces and human activity is one of the defining issues of our times. The unprecedented observational capacity of modern earth-orbiting satellites coupled with the development of robust computational representations (models) of the Earth’s weather and climate systems afford us the opportunity to observe and investigate how these systems work now, how they have worked in the past, and how they will work in the future when forced in specific ways. In the most recent report on global climate change by the Intergovernmental Panel on Climate Change (IPCC; Solomon and others, 2007), analyses using multiple climate models support recent observations that the Earth’s climate is changing in response to a combination of natural and human-induced causes. These changes will be significant in the United States–Mexican border region, where the process of climate change affects all of the Borderlands challenge themes discussed in the preceding chapters. The dual possibilities of both significantly-changed climate and increasing variability in climate make it challenging to take full measure of the potential effects because the Borderlands already experience a high degree of interannual variability and climatological extremes.

Improving plasma actuator performance at low pressure, and an analysis of the pointing capabilities of cubeSats using Plasmonic Force Propulsion (PFP) thrusters

NASA Astrophysics Data System (ADS)

Friz, Paul Daniel

This thesis details the work done on two unrelated projects, plasma actuators, an aerodynamic flow control device, and Plasmonic Force Propulsion (PFP) thrusters, a space propulsion system for small satellites. The first half of the thesis is a paper published in the International Journal of Flow Control on plasma actuators. In this paper the thrust and power consumption of plasma actuators with varying geometries was studied at varying pressure. It was found that actuators with longer buried electrodes produce the most thrust over all and that they substantially improved thrust at low pressure. In particular actuators with 75 mm buried electrodes produced 26% more thrust overall and 34% more thrust at low pressure than the standard 15 mm design. The second half details work done modeling small satellite attitude and reaction control systems in order to compare the use of Plasmonic Force Propulsion thrusters with other state of the art reaction control systems. The model uses bang bang control algorithms and assumes the worst case scenario solar radiation pressure is the only disturbing force. It was found that the estimated 50-500 nN of thrust produced by PFP thrusters would allow the spacecraft which use them extremely high pointing and positioning accuracies (<10-9 degrees and 3 pm). PFP thrusters still face many developmental challenges such as increasing specific impulse which require more research, however, they have great potential to be an enabling technology for future NASA missions such as the Laser Interferometer Space Antenna, and The Stellar Imager.

Biotechnology for the Environment, A Report on the Joint United States - European Union Celebration of a Decade of Environmental Biotechnology Exchange Activities for Early Career Scientists, Project ID: 0011751

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joseph M. Suflita

2006-09-30

The joint EU-US Task Force on Environmental Biotechnology held a workshop entitled, 'A Celebration of a Decade of Environmental Biotechnology Exchange Activities' on October 17, 2005 in Brussels, Belgium. This was a fitting venue since Brussels was where the EU-US transatlantic initiative originated. The workshop brought together former trainees who are currently active in the field of environmental biotechnology in order to (1) assess the impact of the past training activities; (2) to promote further collaborations; and (3) to highlight working group and task force activities in this field. Presentations by the early career scientists filled the meeting day (seemore » Appendix I and II for meeting agenda and abstract book, respectively). Task Force members chaired the various sessions. An additional poster session provided an opportunity for more intensive scientific exchange. The day culminated with a formal dinner and gathering of all participants. Agencies supporting the activities included DOE, USDA and NSF. Funds received from the DOE were exhausted and USDA and NSF allowed the Task Force to use unexpended monies (via no cost extensions) to facilitate future fellowship exchange activities. Over the past ten years, there has been a high level of sensitivity for working collaboratively with European colleagues. This philosophy simply pervades each and every activity of the EU-US Task Force. Realistically, this means that there is a careful balance between the US and EU participation in all functions. The Brussels 'Celebration' workshop was no exception. The organizers anticipated funding more former U.S. trainees than actually attended the workshop and raised the necessary funds to accomplish this goal. However, the number of U.S. attendees needed to be tempered since the financial resources for our EU counterparts proved more difficult to obtain. In order to maintain the scholarly and political balance on the program of events, fewer U.S. attendees were invited. Details of the expenditure of DOE funds are provided in the Table 1. As indicated in the original proposal, funds were used to support both past trainees (Treves, Leigh, Buchan, Bender, Perez-Jimenez, Becker, and Methe) as well as Task Force members (Zylstra, Suflita, Wall). The general assessment by the trainees was that the past Task Force activities were crucial to their development as scientists. The prevailing feeling was that they wished that more individuals could profit from similar experiences. There was also a high degree of enthusiasm for the trainees to get involved in some way with the Task Force activities. That is, the celebration lead to the organization of our former trainees to serve in an advisory capacity for future endeavors. In addition, the gathering served as an opportunity to plan for another two week environmental biotechnology course at Rutgers.« less

ESPR uroradiology task force and ESUR Paediatric Work Group--Imaging recommendations in paediatric uroradiology, part VI: childhood renal biopsy and imaging of neonatal and infant genital tract. Minutes from the task force session at the annual ESPR Meeting 2012 in Athens on childhood renal biopsy and imaging neonatal genitalia.

PubMed

Riccabona, Michael; Lobo, Maria Luisa; Willi, Ulrich; Avni, Fred; Damasio, Beatrice; Ording-Mueller, Lil-Sofie; Blickman, Johan; Darge, Kassa; Papadopoulou, Frederika; Vivier, Pierre-Hugues

2014-04-01

The European Society of Paediatric Radiology Uroradiology Task Force and the ESUR Paediatric Work Group jointly publish guidelines for paediatric urogenital imaging. Two yet unaddressed topics involving patient safety and imaging load are addressed in this paper: renal biopsy in childhood and imaging of the neonatal genital tract, particularly in girls. Based on our thorough review of literature and variable practice in multiple centers, procedural recommendations are proposed on how to perform renal biopsy in children and how to approach the genital tract in (female) neonates. These are statements by consensus due to lack of sufficient evidence-based data. The procedural recommendation on renal biopsy in childhood aims at improving patient safety and reducing the number of unsuccessful passes and/or biopsy-related complications. The recommendation for an imaging algorithm in the assessment of the neonatal genital tract focuses on the potential of ultrasonography to reduce the need for more invasive or radiating imaging, however, with additional fluoroscopy or MRI to be used in selected cases. Adherence to these recommendations will allow comparable data and evidence to be generated for future adaptation of imaging strategies in paediatric uroradiology.

Analysis of injury patterns and roles of care in US and Israel militaries during recent conflicts: Two are better than one.

PubMed

Antebi, Ben; Benov, Avi; Mann-Salinas, Elizabeth A; Le, Tuan D; Cancio, Leopoldo C; Wenke, Joseph C; Paran, Haim; Yitzhak, Avraham; Tarif, Bader; Gross, Kirby R; Dagan, David; Glassberg, Elon

2016-11-01

As new conflicts emerge and enemies evolve, military medical organizations worldwide must adopt the "lessons learned." In this study, we describe roles of care (ROCs) deployed and injuries sustained by both US and Israeli militaries during recent conflicts. The purpose of this collaborative work is facilitate exchange of medical data among allied forces in order to advance military medicine and facilitate strategic readiness for future military engagements that may involve less predictable situations of evacuation and care, such as prolonged field care. This retrospective study was conducted for the periods of 2003 to 2014 from data retrieved from the Department of Defense Trauma Registry and the Israel Defense Force (IDF) Trauma Registry. Comparative analyses included ROC capabilities, casualties who died of wounds, as well as mechanism of injury, anatomical wound distribution, and Injury Severity Score of US and IDF casualties during recent conflicts. Although concept of ROCs was similar among militaries, the IDF supports increased capabilities at point of injury and Role 1 including the presence of physicians, but with limited deployment of other ROCs; conversely, the US maintains fewer capabilities at Role 1 but utilized the entire spectrum of care, including extensive deployment of Roles 2/2+, during recent conflicts. Casualties from US forces (n = 19,005) and IDF (n = 2,637) exhibited significant differences in patterns of injury with higher proportions of casualties who died of wounds in the US forces (4%) compared with the IDF (0.6%). As these data suggest deployed ROCs and injury patterns of US and Israeli militaries were both conflict and system specific. We envision that identification of discordant factors and common medical strategies of the two militaries will enable strategic readiness for future conflicts as well as foster further collaboration among allied forces with the overarching universal goal of eliminating preventable death on the battlefield.

The role of intrinsic muscle mechanics in the neuromuscular control of stable running in the guinea fowl

PubMed Central

Daley, Monica A; Voloshina, Alexandra; Biewener, Andrew A

2009-01-01

Here we investigate the interplay between intrinsic mechanical and neural factors in muscle contractile performance during running, which has been less studied than during walking. We report in vivo recordings of the gastrocnemius muscle of the guinea fowl (Numida meleagris), during the response and recovery from an unexpected drop in terrain. Previous studies on leg and joint mechanics following this perturbation suggested that distal leg extensor muscles play a key role in stabilisation. Here, we test this through direct recordings of gastrocnemius fascicle length (using sonomicrometry), muscle–tendon force (using buckle transducers), and activity (using indwelling EMG). Muscle recordings were analysed from the stride just before to the second stride following the perturbation. The gastrocnemius exhibits altered force and work output in the perturbed and first recovery strides. Muscle work correlates strongly with leg posture at the time of ground contact. When the leg is more extended in the drop step, net gastrocnemius work decreases (−5.2 J kg−1versus control), and when the leg is more flexed in the step back up, it increases (+9.8 J kg−1versus control). The muscle's work output is inherently stabilising because it pushes the body back toward its pre-perturbation (level running) speed and leg posture. Gastrocnemius length and force return to level running means by the second stride following the perturbation. EMG intensity differs significantly from level running only in the first recovery stride following the perturbation, not within the perturbed stride. The findings suggest that intrinsic mechanical factors contribute substantially to the initial changes in muscle force and work. The statistical results suggest that a history-dependent effect, shortening deactivation, may be an important factor in the intrinsic mechanical changes, in addition to instantaneous force–velocity and force–length effects. This finding suggests the potential need to incorporate history-dependent muscle properties into neuromechanical simulations of running, particularly if high muscle strains are involved and stability characteristics are important. Future work should test whether a Hill or modified Hill type model provides adequate prediction in such conditions. Interpreted in light of previous studies on walking, the findings support the concept of speed-dependent roles of reflex feedback. PMID:19359369

3 CFR - White House Task Force on Middle-Class Working Families

Code of Federal Regulations, 2010 CFR

2010-01-01

... 3 The President 1 2010-01-01 2010-01-01 false White House Task Force on Middle-Class Working... Task Force on Middle-Class Working Families Memorandum for the Heads of Executive Departments and... times. To these ends, I hereby direct the following: Section 1. White House Task Force on Middle-Class...

Surface structure and stability of partially hydroxylated silica surfaces

DOE PAGES

Rimsza, J. M.; Jones, R. E.; Criscenti, L. J.

2017-04-04

Surface energies of silicates influence crack propagation during brittle fracture and decrease with surface relaxation caused by annealing and hydroxylation. Molecular-level simulations are particularly suited for the investigation of surface processes. In this work, classical MD simulations of silica surfaces are performed with two force fields (ClayFF and ReaxFF) to investigate the effect of force field reactivity on surface structure and energy as a function of surface hydroxylation. An unhydroxylated fracture surface energy of 5.1 J/m 2 is calculated with the ClayFF force field, and 2.0 J/m 2 is calculated for the ReaxFF force field. The ClayFF surface energies aremore » consistent with the experimental results from double cantilever beam fracture tests (4.5 J/m 2), whereas ReaxFF underestimated these surface energies. Surface relaxation via annealing and hydroxylation was performed by creating a low-energy equilibrium surface. Annealing condensed neighboring siloxane bonds increased the surface connectivity, and decreased the surface energies by 0.2 J/m 2 for ClayFF and 0.8 J/m 2 for ReaxFF. Posthydroxylation surface energies decreased further to 4.6 J/m 2 with the ClayFF force field and to 0.2 J/m 2 with the ReaxFF force field. Experimental equilibrium surface energies are ~0.35 J/m 2, consistent with the ReaxFF force field. Although neither force field was capable of replicating both the fracture and equilibrium surface energies reported from experiment, each was consistent with one of these conditions. Furthermore, future computational investigations that rely on accurate surface energy values should consider the surface state of the system and select the appropriate force field.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rimsza, J. M.; Jones, R. E.; Criscenti, L. J.

Surface energies of silicates influence crack propagation during brittle fracture and decrease with surface relaxation caused by annealing and hydroxylation. Molecular-level simulations are particularly suited for the investigation of surface processes. In this work, classical MD simulations of silica surfaces are performed with two force fields (ClayFF and ReaxFF) to investigate the effect of force field reactivity on surface structure and energy as a function of surface hydroxylation. An unhydroxylated fracture surface energy of 5.1 J/m 2 is calculated with the ClayFF force field, and 2.0 J/m 2 is calculated for the ReaxFF force field. The ClayFF surface energies aremore » consistent with the experimental results from double cantilever beam fracture tests (4.5 J/m 2), whereas ReaxFF underestimated these surface energies. Surface relaxation via annealing and hydroxylation was performed by creating a low-energy equilibrium surface. Annealing condensed neighboring siloxane bonds increased the surface connectivity, and decreased the surface energies by 0.2 J/m 2 for ClayFF and 0.8 J/m 2 for ReaxFF. Posthydroxylation surface energies decreased further to 4.6 J/m 2 with the ClayFF force field and to 0.2 J/m 2 with the ReaxFF force field. Experimental equilibrium surface energies are ~0.35 J/m 2, consistent with the ReaxFF force field. Although neither force field was capable of replicating both the fracture and equilibrium surface energies reported from experiment, each was consistent with one of these conditions. Furthermore, future computational investigations that rely on accurate surface energy values should consider the surface state of the system and select the appropriate force field.« less

The worker of the future. A system outlines the competencies its employees will need.

PubMed

Hill, K; Meyer, B

1998-01-01

In 1993, Sisters of Mercy Health System-St. Louis (SMHS), having asked itself what kind of employees it would need in the twenty-first century, established a Worker of the Future Task Force to develop tentative answers. The task force began by making projections concerning healthcare, studying the strategic plans of SMHS's members, and surveying its employees. It learned that the system should help workers see how change could benefit them. Next, the task force studied the cultural history of the Sisters of Mercy, developing from it Six Guiding Principles for the evaluation of employee performance. From these principles, the task force derived Twelve Competencies that SMHS will seek in future workers. In 1995 the system's education leaders, with the aid of an internal training organization, decided to develop 17 training modules based on these guiding principles and competencies. Since then, more than 85 SMHS employees have been trained to help coworkers develop customer service skills and other competencies. SMHS has also incorporated the competencies in its job descriptions and performance evaluations, added the Worker of the Future curriculum to its orientation program for new employees, and is currently developing Worker of the Future training sessions for human resources personnel who interview prospective employees.

Grasp Assist Device with Automatic Mode Control Logic

NASA Technical Reports Server (NTRS)

Laske, Evan (Inventor); Davis, Donald R. (Inventor); Ihrke, Chris A. (Inventor)

2018-01-01

A system includes a glove, sensors, actuator assemblies, and controller. The sensors include load sensors which measure an actual grasping force and attitude sensors which determine a glove attitude. The actuator assembly provides a grasp assist force to the glove. Respective locations of work cells in the work environment and permitted work tasks for each work cell are programmed into the controller. The controller detects the glove location and attitude. A work task is selected by the controller for the location. The controller calculates a required grasp assist force using measured actual grasping forces from the load sensors. The required grasp assist force is applied via the glove using the actuator assembly to thereby assist the operator in performing the identified work task.

State Workforce Policy Initiative.

ERIC Educational Resources Information Center

Public/Private Ventures, Philadelphia, PA.

Surging demand for workers, growing income inequality, and passage of welfare reforms have made work force development one of the United States' key national concerns. Public/Private Ventures has been working with various states to design work force development strategies that seek to address the concerns of many work force development specialists…

Cyberspace Human Capital: Building a Cadre Today to Win Tomorrows War

DTIC Science & Technology

2016-04-28

sustainable and flexible framework that manages and develops a cyberspace cadre, today and into the future. This professional paper examines USAF and DoD...future conflicts, USAF leadership must develop a sustainable and flexible framework that manages and develops cyberspace cadre...international security and stability. CYBERSPACE FORCE MANAGEMENT ACCESSIONS RETENTION INSTITUTIONAL STRUCTURE FORCE DEVELOPMENT EDUCATION TRAINING

Intergovernmental Panel on Climate Change (IPCC)\\, Working Group 1, 1994: Modelling Results Relating Future Atmospheric CO2 Concentrations to Industrial Emissions (DB1009)

DOE Data Explorer

Enting, I. G.; Wigley, M. L.; Heimann, M.

1995-01-01

This database contains the results of various projections of the relation between future CO2 concentrations and future industrial emissions. These projections were contributed by groups from a number of countries as part of the scientific assessment for the report, "Radiative Forcing of Climate Change" (1994), issued by Working Group 1 of the Intergovernmental Panel on Climate Change. There were three types of calculations: (1) forward projections, calculating the atmospheric CO2 concentrations resulting from specified emissions scenarios; (2) inverse calculations, determining the emission rates that would be required to achieve stabilization of CO2 concentrations via specified pathways; (3) impulse response function calculations, required for determining Global Warming Potentials. The projections were extrapolations of global carbon cycle models from pre-industrial times (starting at 1765) to 2100 or 2200 A.D. There were two aspects to the exercise: (1) an assessment of the uncertainty due to uncertainties regarding the current carbon budget, and (2) an assessment of the uncertainties arising from differences between models. To separate these effects, a set of standard conditions was used to explore inter-model differences and then a series of sensitivity studies was used to explore the consequences of current uncertainties in the carbon cycle.

Assessment of a Wearable Force- and Electromyography Device and Comparison of the Related Signals for Myocontrol

PubMed Central

Connan, Mathilde; Ruiz Ramírez, Eduardo; Vodermayer, Bernhard; Castellini, Claudio

2016-01-01

In the frame of assistive robotics, multi-finger prosthetic hand/wrists have recently appeared, offering an increasing level of dexterity; however, in practice their control is limited to a few hand grips and still unreliable, with the effect that pattern recognition has not yet appeared in the clinical environment. According to the scientific community, one of the keys to improve the situation is multi-modal sensing, i.e., using diverse sensor modalities to interpret the subject's intent and improve the reliability and safety of the control system in daily life activities. In this work, we first describe and test a novel wireless, wearable force- and electromyography device; through an experiment conducted on ten intact subjects, we then compare the obtained signals both qualitatively and quantitatively, highlighting their advantages and disadvantages. Our results indicate that force-myography yields signals which are more stable across time during whenever a pattern is held, than those obtained by electromyography. We speculate that fusion of the two modalities might be advantageous to improve the reliability of myocontrol in the near future. PMID:27909406

Development of a Phasor Diagram Creator to Visualize the Piston and Displacer Forces in an Advanced Stirling Convertor

NASA Technical Reports Server (NTRS)

Saha, Dipanjan; Lewandowski, Edward J.

2013-01-01

The steady-state, nearly sinusoidal behavior of the components in a free-piston Stirling engine allows for visualization of the forces in the system using phasor diagrams. Based on Newton's second law, F = ma, any phasor diagrams modeling a given component in a system should close if all of the acting forces have been considered. Since the Advanced Stirling Radioisotope Generator (ASRG), currently being developed for future NASA deep space missions, is made up of such nearly sinusoidally oscillating components, its phasor diagrams would also be expected to close. A graphical user interface (GUI) has been written in MATLAB (MathWorks), which takes user input data, passes it to Sage (Gedeon Associates), a one-dimensional thermodynamic modeling program used to model the Stirling convertor, runs Sage, and then automatically plots the phasor diagrams. Using this software tool, the effect of varying different Sage inputs on the phasor diagrams was determined. The parameters varied were piston amplitude, hot-end temperature, cold-end temperature, operating frequency, and displacer spring constant. These phasor diagrams offer useful insight into convertor operation and performance.

Sample and design considerations in post-disaster mental health needs assessment tracking surveys

PubMed Central

Kessler, Ronald C.; Keane, Terence M.; Ursano, Robert J.; Mokdad, Ali; Zaslavsky, Alan M.

2009-01-01

Although needs assessment surveys are carried out after many large natural and man-made disasters, synthesis of findings across these surveys and disaster situations about patterns and correlates of need is hampered by inconsistencies in study designs and measures. Recognizing this problem, the US Substance Abuse and Mental Health Services Administration (SAMHSA) assembled a task force in 2004 to develop a model study design and interview schedule for use in post-disaster needs assessment surveys. The US National Institute of Mental Health subsequently approved a plan to establish a center to implement post-disaster mental health needs assessment surveys in the future using an integrated series of measures and designs of the sort proposed by the SAMHSA task force. A wide range of measurement, design, and analysis issues will arise in developing this center. Given that the least widely discussed of these issues concerns study design, the current report focuses on the most important sampling and design issues proposed for this center based on our experiences with the SAMHSA task force, subsequent Katrina surveys, and earlier work in other disaster situations. PMID:19035440

The distribution of physiotherapists in ontario: understanding the market drivers.

PubMed

Holyoke, Paul; Verrier, Molly C; Landry, Michel D; Deber, Raisa B

2012-01-01

To understand the factors that affect the distribution of physiotherapists in Ontario by examining three potential influences in the multi-payer physiotherapy (PT) market: population need, critical mass (related to academic health science centres [AHSCs]), and market forces. Physiotherapist density and distribution were calculated from 2003 and 2005 College of Physiotherapists of Ontario registration data. Physiotherapists' workplaces were classified as not-for-profit (NFP) hospitals, other NFP, or for-profit (FP), and their locations were classified by census division (CD) types (cities and counties). Physiotherapist density varied significantly and distribution was neither uniformly responsive to population need, nor driven primarily by market forces. The largest factor was an AHSC in a CD; physiotherapists locate disproportionately in NFP hospitals in AHSCs rather than in the growing FP sector. While some patterns can be discerned in the distribution and densities of physiotherapists across Ontario, further work needs to be done to identify why population need and market forces appear to be less influential, and why CDs with AHSCs are so attractive to physiotherapists. With this additional information, it may be possible to identify ways to influence uneven distribution in the future.

An Aerodynamic Assessment of Micro-Drag Generators (MDGs)

NASA Technical Reports Server (NTRS)

Bauer, Steven X. S.

1998-01-01

Commercial transports as well as fighter aircraft of the future are being designed with very low drag (friction and pressure). Concurrently, commuter airports are being built or envisioned to be built in the centers of metropolitan areas where shorter runways and/or reduced noise footprints on takeoff and landing are required. These requirements and the fact that drag is lower on new vehicles than on older aircraft have resulted in vehicles that require a large amount of braking force (from landing-gear brakes, spoilers, high-lift flaps, thrust reversers, etc.). Micro-drag generators (MDGs) were envisioned to create a uniformly distributed drag force along a vehicle by forcing the flow to separate on the aft-facing surface of a series of deployable devices, thus, generating drag. The devices are intended to work at any speed and for any type of vehicle (aircraft, ground vehicles, sea-faring vehicles). MDGs were applied to a general aviation wing and a representative fuselage shape and tested in two subsonic wind tunnels. The results showed increases in drag of 2 to 6 times that of a "clean" configuration.

A Transient Initialization Routine of the Community Ice Sheet Model for the Greenland Ice Sheet

NASA Astrophysics Data System (ADS)

van der Laan, Larissa; van den Broeke, Michiel; Noël, Brice; van de Wal, Roderik

2017-04-01

The Community Ice Sheet Model (CISM) is to be applied in future simulations of the Greenland Ice Sheet under a range of climate change scenarios, determining the sensitivity of the ice sheet to individual climatic forcings. In order to achieve reliable results regarding ice sheet stability and assess the probability of future occurrence of tipping points, a realistic initial ice sheet geometry is essential. The current work describes and evaluates the development of a transient initialization routine, using NGRIP 18O isotope data to create a temperature anomaly field. Based on the latter, surface mass balance components runoff and precipitation are perturbed for the past 125k years. The precipitation and runoff fields originate from a downscaled 1 km resolution version of the regional climate model RACMO2.3 for the period 1961-1990. The result of the initialization routine is a present-day ice sheet with a transient memory of the last glacial-interglacial cycle, which will serve as the future runs' initial condition.

Racial and ethnic differences in the retirement prospects of divorced women in the Baby Boom and Generation X cohorts.

PubMed

Butrica, Barbara A; Smith, Karen E

2012-01-01

Blacks, Hispanics, and divorced women have historically experienced double-digit poverty rates in retirement, and divorce and other demographic trends will increase their representation in future retiree populations. For these reasons, we might expect an increase in the proportion of economically vulnerable divorced women in the future. This article uses the Social Security Administration's Modeling Income in the Near Term (version 6) to describe the likely characteristics, work experience, Social Security benefit status, and economic well-being of future divorced women at age 70 by race and ethnicity. Factors associated with higher retirement incomes include having a college degree; having a strong history of labor force attachment; receiving Social Security benefits; and having pensions, retirement accounts, or assets, regardless of race and ethnicity. However, because divorced black and Hispanic women are less likely than divorced white women to have these attributes, income sources, or assets, their projected average retirement incomes are lower than those of divorced white women.

Agricultural Work Force Households: How Much Do They Depend on Farming? Background for Agricultural Policy. Agriculture Information Bulletin Number 547.

ERIC Educational Resources Information Center

Cox, E. Jane; Oliveira, Victor J.

According to data from the 1985 Agricultural Work Force Survey, over 13.5 million of the 17.6 million agricultural work force household members (77 percent) lived in households headed by a farm worker. Some farm workers worked on the farm as their primary job, whereas others primarily worked off the farm. Farm work was an occasional form of…

Sensing power transfer between the human body and the environment.

PubMed

Veltink, Peter H; Kortier, Henk; Schepers, H Martin

2009-06-01

The power transferred between the human body and the environment at any time and the work performed are important quantities to be estimated when evaluating and optimizing the physical interaction between the human body and the environment in sports, physical labor, and rehabilitation. It is the objective of the current paper to present a concept for estimating power transfer between the human body and the environment during free motions and using sensors at the interface, not requiring measurement systems in the environment, and to experimentally demonstrate this principle. Mass and spring loads were moved by hand over a fixed height difference via varying free movement trajectories. Kinematic and kinetic quantities were measured in the handle between the hand and the load. 3-D force and moments were measured using a 6 DOF force/moment sensor module, 3-D movement was measured using 3-D accelerometers and angular velocity sensors. The orientation was estimated from the angular velocity, using the initial orientation as a begin condition. The accelerometer signals were expressed in global coordinates using this orientation information. Velocity was estimated by integrating acceleration in global coordinates, obtained by adding gravitational acceleration to the accelerometer signals. Zero start and end velocities were used as begin and end conditions. Power was calculated as the sum of the inner products of velocity and force and of angular velocity and moment, and work was estimated by integrating power over time. The estimated performed work was compared to the potential energy difference corresponding to the change in height of the loads and appeared to be accurate within 4% for varying movements with net displacements and varying loads (mass and spring). The principle of estimating power transfer demonstrated in this paper can be used in future interfaces between the human body and the environment instrumented with body-mounted miniature 3-D force and acceleration sensors.

Obesity-related differences in neural correlates of force control.

PubMed

Mehta, Ranjana K; Shortz, Ashley E

2014-01-01

Greater body segment mass due to obesity has shown to impair gross and fine motor functions and reduce balance control. While recent studies suggest that obesity may be linked with altered brain functions involved in fine motor tasks, this association is not well investigated. The purpose of this study was to examine the neural correlates of motor performance in non-obese and obese adults during force control of two upper extremity muscles. Nine non-obese and eight obese young adults performed intermittent handgrip and elbow flexion exertions at 30% of their respective muscle strengths for 4 min. Functional near infrared spectroscopy was employed to measure neural activity in the prefrontal cortex bilaterally, joint steadiness was computed using force fluctuations, and ratings of perceived exertions (RPEs) were obtained to assess perceived effort. Obesity was associated with higher force fluctuations and lower prefrontal cortex activation during handgrip exertions, while RPE scores remained similar across both groups. No obesity-related differences in neural activity, force fluctuation, or RPE scores were observed during elbow flexion exertions. The study is one of the first to examine obesity-related differences on prefrontal cortex activation during force control of the upper extremity musculature. The study findings indicate that the neural correlates of motor activity in the obese may be muscle-specific. Future work is warranted to extend the investigation to monitoring multiple motor-function related cortical regions and examining obesity differences with different task parameters (e.g., longer duration, increased precision demands, larger muscles, etc.).

Exploration of Two Training Paradigms Using Forced Induced Weight Shifting With the Tethered Pelvic Assist Device to Reduce Asymmetry in Individuals After Stroke: Case Reports.

PubMed

Bishop, Lauri; Khan, Moiz; Martelli, Dario; Quinn, Lori; Stein, Joel; Agrawal, Sunil

2017-10-01

Many robotic devices in rehabilitation incorporate an assist-as-needed haptic guidance paradigm to promote training. This error reduction model, while beneficial for skill acquisition, could be detrimental for long-term retention. Error augmentation (EA) models have been explored as alternatives. A robotic Tethered Pelvic Assist Device has been developed to study force application to the pelvis on gait and was used here to induce weight shift onto the paretic (error reduction) or nonparetic (error augmentation) limb during treadmill training. The purpose of these case reports is to examine effects of training with these two paradigms to reduce load force asymmetry during gait in two individuals after stroke (>6 mos). Participants presented with baseline gait asymmetry, although independent community ambulators. Participants underwent 1-hr trainings for 3 days using either the error reduction or error augmentation model. Outcomes included the Borg rating of perceived exertion scale for treatment tolerance and measures of force and stance symmetry. Both participants tolerated training. Force symmetry (measured on treadmill) improved from pretraining to posttraining (36.58% and 14.64% gains), however, with limited transfer to overground gait measures (stance symmetry gains of 9.74% and 16.21%). Training with the Tethered Pelvic Assist Device device proved feasible to improve force symmetry on the treadmill irrespective of training model. Future work should consider methods to increase transfer to overground gait.

Knowledge Management - A Necessity For The Training Of Future Specialists Of The Sustainable Entreprises

NASA Astrophysics Data System (ADS)

Rotaru, Ionela Magdalena

2015-09-01

The world we are living in is shaped by what is a reality for years already: globalisation of economy. The lack of borders makes the impact that technology has on society to be a major one. The virtual world so accessible today is not just about new markets, access to cheaper work force, work online but also fierce competition. The common denominator of most efforts in the area of industry is performance. Limits continuously moving willingness to pay for products that delineate the performance delivered be the same range. Here too we can see the role of the education. For example, Landes shows that both knowledge and know-how are the ones that determine how well off societies are. The education of engineers is therefore critical to every nation to ensure the prosperity of its citizens. This paper here intends to approach the educational process of the engineering specific area of knowledge from the management perspective. The training process becomes sustainable in accordance with the requirements of the future: trained specialists for sustainable enterprises.

40 CFR 35.936-14 - Force account work.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Force account work. 35.936-14 Section... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.936-14 Force account work. (a) A grantee must secure the project officer's prior written approval for use of...

Diversity in the Work Force. The Highlight Zone: Research @ Work No. 4.

ERIC Educational Resources Information Center

Wentling, Rose Mary

A literature review was conducted to identify critical work force diversity issues in today's changing workplace and identify ways organizations and career and technical education (CTE) practitioners can increase work force diversity. A broad, all-inclusive definition of diversity was developed that focuses on how diversity affects individuals and…

Part-time careers in academic internal medicine: a report from the association of specialty professors part-time careers task force on behalf of the alliance for academic internal medicine.

PubMed

Linzer, Mark; Warde, Carole; Alexander, R Wayne; Demarco, Deborah M; Haupt, Allison; Hicks, Leroi; Kutner, Jean; Mangione, Carol M; Mechaber, Hilit; Rentz, Meridith; Riley, Joanne; Schuster, Barbara; Solomon, Glen D; Volberding, Paul; Ibrahim, Tod

2009-10-01

To establish guidelines for more effectively incorporating part-time faculty into departments of internal medicine, a task force was convened in early 2007 by the Association of Specialty Professors. The task force used informal surveys, current literature, and consensus building among members of the Alliance for Academic Internal Medicine to produce a consensus statement and a series of recommendations. The task force agreed that part-time faculty could enrich a department of medicine, enhance workforce flexibility, and provide high-quality research, patient care, and education in a cost-effective manner. The task force provided a series of detailed steps for operationalizing part-time practice; to do so, key issues were addressed, such as fixed costs, malpractice insurance, space, cross-coverage, mentoring, career development, productivity targets, and flexible scheduling. Recommendations included (1) increasing respect for work-family balance, (2) allowing flexible time as well as part-time employment, (3) directly addressing negative perceptions about part-time faculty, (4) developing policies to allow flexibility in academic advancement, (5) considering part-time faculty as candidates for leadership positions, (6) encouraging granting agencies, including the National Institutes of Health and Veterans Administration, to consider part-time faculty as eligible for research career development awards, and (7) supporting future research in "best practices" for incorporating part-time faculty into academic departments of medicine.

Flight Testing an Iced Business Jet for Flight Simulation Model Validation

NASA Technical Reports Server (NTRS)

Ratvasky, Thomas P.; Barnhart, Billy P.; Lee, Sam; Cooper, Jon

2007-01-01

A flight test of a business jet aircraft with various ice accretions was performed to obtain data to validate flight simulation models developed through wind tunnel tests. Three types of ice accretions were tested: pre-activation roughness, runback shapes that form downstream of the thermal wing ice protection system, and a wing ice protection system failure shape. The high fidelity flight simulation models of this business jet aircraft were validated using a software tool called "Overdrive." Through comparisons of flight-extracted aerodynamic forces and moments to simulation-predicted forces and moments, the simulation models were successfully validated. Only minor adjustments in the simulation database were required to obtain adequate match, signifying the process used to develop the simulation models was successful. The simulation models were implemented in the NASA Ice Contamination Effects Flight Training Device (ICEFTD) to enable company pilots to evaluate flight characteristics of the simulation models. By and large, the pilots confirmed good similarities in the flight characteristics when compared to the real airplane. However, pilots noted pitch up tendencies at stall with the flaps extended that were not representative of the airplane and identified some differences in pilot forces. The elevator hinge moment model and implementation of the control forces on the ICEFTD were identified as a driver in the pitch ups and control force issues, and will be an area for future work.

Performance of Inductors Attached to a Galvanizing Bath

NASA Astrophysics Data System (ADS)

Zhou, Xinping; Yuan, Shuo; Liu, Chi; Yang, Peng; Qian, Chaoqun; Song, Bao

2013-12-01

By taking a galvanizing bath with inductors from an Iron and Steel Co., Ltd as an example, the distributions of Lorentz force and generated heat in the inductor are simulated. As a result, the zinc flow and the temperature distribution driven by the Lorentz force and the generated heat in the inductor of a galvanizing bath are simulated numerically, and their characteristics are analyzed. The relationship of the surface-weighted average velocity at the outlet and the temperature difference between the inlet and the outlet and the effective power for the inductor is studied. Results show that with an increase in effective power for the inductor, the surface-weighted average velocity at the outlet and the temperature difference between the inlet and the outlet increase gradually. We envisage this work to lay a foundation for the study of the performance of the galvanizing bath in future.

Hydrophobic potential of mean force as a solvation function for protein structure prediction.

PubMed

Lin, Matthew S; Fawzi, Nicolas Lux; Head-Gordon, Teresa

2007-06-01

We have developed a solvation function that combines a Generalized Born model for polarization of protein charge by the high dielectric solvent, with a hydrophobic potential of mean force (HPMF) as a model for hydrophobic interaction, to aid in the discrimination of native structures from other misfolded states in protein structure prediction. We find that our energy function outperforms other reported scoring functions in terms of correct native ranking for 91% of proteins and low Z scores for a variety of decoy sets, including the challenging Rosetta decoys. This work shows that the stabilizing effect of hydrophobic exposure to aqueous solvent that defines the HPMF hydration physics is an apparent improvement over solvent-accessible surface area models that penalize hydrophobic exposure. Decoys generated by thermal sampling around the native-state basin reveal a potentially important role for side-chain entropy in the future development of even more accurate free energy surfaces.

Biological Soft Robotics.

PubMed

Feinberg, Adam W

2015-01-01

In nature, nanometer-scale molecular motors are used to generate force within cells for diverse processes from transcription and transport to muscle contraction. This adaptability and scalability across wide temporal, spatial, and force regimes have spurred the development of biological soft robotic systems that seek to mimic and extend these capabilities. This review describes how molecular motors are hierarchically organized into larger-scale structures in order to provide a basic understanding of how these systems work in nature and the complexity and functionality we hope to replicate in biological soft robotics. These span the subcellular scale to macroscale, and this article focuses on the integration of biological components with synthetic materials, coupled with bioinspired robotic design. Key examples include nanoscale molecular motor-powered actuators, microscale bacteria-controlled devices, and macroscale muscle-powered robots that grasp, walk, and swim. Finally, the current challenges and future opportunities in the field are addressed.

KSC-2013-3223

NASA Image and Video Library

2013-08-06

CAPE CANAVERAL, Fla. – In Hangar N at Cape Canaveral Air Force Station, ceramic materials are positioned for Advanced Partial Angle Computed Tomography testing. The activity is part of work performed by PaR Systems, Inc. under a partnership agreement with NASA. NASA's Kennedy Space Center in Florida recently established a partnership agreement with PaR Systems, Inc. of Shoreview, Minn., for operation of the Hangar N facility and its nondestructive testing and evaluation equipment. As the spaceport transitions from a historically government-only launch facility to a multi-user spaceport for both federal and commercial customers, partnerships between the space agency and other organizations will be a key element in that effort. Hangar N is located at Cape Canaveral Air Force Station adjacent to Kennedy and houses a unique inventory of test and evaluation equipment and the capability for current and future mission spaceflight support. Photo credit: NASA/ Dimitri Gerondidakis

Evaluation of knee joint forces during kneeling work with different kneepads.

PubMed

Xu, Hang; Jampala, Sree; Bloswick, Donald; Zhao, Jie; Merryweather, Andrew

2017-01-01

The main purpose of this study is to determine knee joint forces resulting from kneeling work with and without kneepads to quantify how different kneepads redistribute force. Eleven healthy males simulated a tile setting task to different locations during six kneepad states (five different kneepad types and without kneepad). Peak and average forces on the anatomical landmarks of both knees were obtained by custom force sensors. The results revealed that kneepad design can significantly modify the forces on the knee joint through redistribution. The Professional Gel design was preferred among the five tested kneepads which was confirmed with both force measurements and participants' responses. The extreme reaching locations induced significantly higher joint forces on left knee or right knee depending on task. The conclusion of this study is that a properly selected kneepad for specific tasks and a more neutral working posture can modify the force distribution on the knees and likely decrease the risk of knee disorders from kneeling work. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Informal Economy: Recent Trends, Future Directions.

PubMed

Chen, Martha Alter

2016-08-01

Informal employment represents more than half of nonagricultural employment in most developing regions, contributes to the overall economy, and provides pathways to reduction of poverty and inequality. Support to the informal economy should include the expansion of occupational health and safety to include informal workers, based on an analysis of their work places and work risks. The paper presents main schools of thought and argues for a holistic understanding of the different segments of the informal work force and for policies and interventions tailored to the needs and constraints of these different segments. The paper recommends a policy approach which seeks to extend social protection, including occupational health and safety services, to informal workers, and to increase the productivity of informal enterprises and informal workers through an enabling environment and support services. The paper calls for a new paradigm of a hybrid economy which would value and integrate the informal economy alongside the formal economies. © The Author(s) 2016.

Flywheel Energy Storage System Suspended by Hybrid Magnetic Bearing

NASA Astrophysics Data System (ADS)

Owusu-Ansah, Prince; Hu, Yefa; Misbawu, Adam

This work presents a prototype flywheel energy storage system (FESS) suspended by hybrid magnetic bearing (HMB) rotating at a speed of 20000rpm with a maximum storage power capacity of 30W with a maximum tip speed of 300m/s. The design presented is an improvement of most existing FESS, as the design incorporates a unique feature in that the upper and the lower rotor and stator core are tapered which enhances larger thrust and much lower radial force to be exerted on the system. Without any adverse effect being experienced by the model. The work also focuses on the description of developing a prototype FESS suspended by HMB using solid works as a basis of developing in the nearer future a more improved FESS suspended by HMB capable of injecting the ever increasing high energy demand situation in the 21st century and beyond.

A Survey of Telecommunications Technology. Part I. President's Task Force on Communications Policy. Staff Paper One, Part I.

ERIC Educational Resources Information Center

Rostow, Eugene V.

A staff paper submitted to the President's Task Force on Communications Policy surveys the range of present and future innovations in communications techniques, assesses their feasibility and costs, and projects the rate and manner in which they will be deployed in the future. In general, the many technological possibilities--including…

The Joint Force in a Contested and Disordered World

DTIC Science & Technology

2016-07-14

environment. Next, Section 2 explores how the intersection and interaction of these changes might impact the character of war in the future. Finally, Section...ideas about how changes to conflict and war might impact the capabilities and operational approaches required by the future Joint Force. These...1 Colin Gray, Another Bloody Century, (2005), p. 43. 2 challenges that will impact the

Mapping the Future: Optimizing Joint Geospatial Engineering Support

DTIC Science & Technology

2006-05-16

Environment. Maxwell Air Force Base, AL.: Air University, 1990. Babbage , Ross and Desmond Ball. Geographic Information Systems: Defence Applications...Joint Pub 4-04. Washington, DC: 27 September 2001. Wertz, Charles J. The Data Dictionary, Concepts and Uses. Wellesley, MA: QED Information...Force Defense Mapping for Future Operations, Washington, DC: September 1995, 1-7. 18 Charles J. Wertz, The Data Dictionary, Concepts and Uses

Women and the family of the future.

PubMed

Quimby, C H

1994-02-01

The complexities of current societal trends impose a daunting challenge to providers of maternal child health services. Demographers, anthropologists, sociologists, policy makers, and health care providers struggle to grasp the multiple issues in an effort to create useful strategies for the 21st century. The 1990s have been labeled the decade of women's health. Legislative and policy efforts have focused new and much-needed attention on women as recipients and providers of health care. The realities of mothers in the work force, the epidemic of adolescent pregnancy, the swelling ranks of women and children in poverty, the increasing number of women with acquired immune deficiency syndrome, the new advances in reproductive technology, and the effect of population and immigration trends greatly influence the childbearing client of the future and create enormous pressures for critical problem solving.

Application of Human-Autonomy Teaming (HAT) Patterns to Reduced Crew Operations (RCO)

NASA Technical Reports Server (NTRS)

Shively, R. Jay; Brandt, Summer L.; Lachter, Joel; Matessa, Mike; Sadler, Garrett; Battiste, Henri

2016-01-01

As part of the Air Force - NASA Bi-Annual Research Council Meeting, slides will be presented on recent Reduced Crew Operations (RCO) work. Unmanned aerial systems, robotics, advanced cockpits, and air traffic management are all examples of domains that are seeing dramatic increases in automation. While automation may take on some tasks previously performed by humans, humans will still be required, for the foreseeable future, to remain in the system. The collaboration with humans and these increasingly autonomous systems will begin to resemble cooperation between teammates, rather than simple task allocation. It is critical to understand this human-autonomy teaming (HAT) to optimize these systems in the future. One methodology to understand HAT is by identifying recurring patterns of HAT that have similar characteristics and solutions. A methodology for identifying HAT patterns to an advanced cockpit project is discussed.

Growing the Idaho economy : moving into the future.

DOT National Transportation Integrated Search

2010-08-13

A report on transportation and the possible future economy of the State of Idaho from 2010 to 2030, including : current assets to leverage, driving forces shaping the future, long-range economic opportunities for Idaho including : four future scenari...

Observed differences in upper extremity forces, muscle efforts, postures, velocities and accelerations across computer activities in a field study of office workers.

PubMed

Bruno Garza, J L; Eijckelhof, B H W; Johnson, P W; Raina, S M; Rynell, P W; Huysmans, M A; van Dieën, J H; van der Beek, A J; Blatter, B M; Dennerlein, J T

2012-01-01

This study, a part of the PRedicting Occupational biomechanics in OFfice workers (PROOF) study, investigated whether there are differences in field-measured forces, muscle efforts, postures, velocities and accelerations across computer activities. These parameters were measured continuously for 120 office workers performing their own work for two hours each. There were differences in nearly all forces, muscle efforts, postures, velocities and accelerations across keyboard, mouse and idle activities. Keyboard activities showed a 50% increase in the median right trapezius muscle effort when compared to mouse activities. Median shoulder rotation changed from 25 degrees internal rotation during keyboard use to 15 degrees external rotation during mouse use. Only keyboard use was associated with median ulnar deviations greater than 5 degrees. Idle activities led to the greatest variability observed in all muscle efforts and postures measured. In future studies, measurements of computer activities could be used to provide information on the physical exposures experienced during computer use. Practitioner Summary: Computer users may develop musculoskeletal disorders due to their force, muscle effort, posture and wrist velocity and acceleration exposures during computer use. We report that many physical exposures are different across computer activities. This information may be used to estimate physical exposures based on patterns of computer activities over time.

Buckling of a beam extruded into highly viscous fluid

NASA Astrophysics Data System (ADS)

Gosselin, F. P.; Neetzow, P.; Paak, M.

2014-11-01

Inspired by microscopic Paramecia which use trichocyst extrusion to propel themselves away from thermal aggression, we propose a macroscopic experiment to study the stability of a slender beam extruded in a highly viscous fluid. Piano wires were extruded axially at constant speed in a tank filled with corn syrup. The force necessary to extrude the wire was measured to increase linearly at first until the compressive viscous force causes the wire to buckle. A numerical model, coupling a lengthening elastica formulation with resistive-force theory, predicts a similar behavior. The model is used to study the dynamics at large time when the beam is highly deformed. It is found that at large time, a large deformation regime exists in which the force necessary to extrude the beam at constant speed becomes constant and length independent. With a proper dimensional analysis, the beam can be shown to buckle at a critical length based on the extrusion speed, the bending rigidity, and the dynamic viscosity of the fluid. Hypothesizing that the trichocysts of Paramecia must be sized to maximize their thrust per unit volume as well as avoid buckling instabilities, we predict that their bending rigidity must be about 3 ×10-9N μ m2 . The verification of this prediction is left for future work.

Photoinduced work function changes by isomerization of a densely packed azobenzene-based SAM on Au: a joint experimental and theoretical study.

PubMed

Crivillers, N; Liscio, A; Di Stasio, F; Van Dyck, C; Osella, S; Cornil, D; Mian, S; Lazzerini, G M; Fenwick, O; Orgiu, E; Reinders, F; Braun, S; Fahlman, M; Mayor, M; Cornil, J; Palermo, V; Cacialli, F; Samorì, P

2011-08-28

Responsive monolayers are key building blocks for future applications in organic and molecular electronics in particular because they hold potential for tuning the physico-chemical properties of interfaces, including their energetics. Here we study a photochromic SAM based on a conjugated azobenzene derivative and its influence on the gold work function (Φ(Au)) when chemisorbed on its surface. In particular we show that the Φ(Au) can be modulated with external stimuli by controlling the azobenzene trans/cis isomerization process. This phenomenon is characterized experimentally by four different techniques, kelvin probe, kelvin probe force microscopy, electroabsorption spectroscopy and ultraviolet photoelectron spectroscopy. The use of different techniques implies exposing the SAM to different measurement conditions and different preparation methods, which, remarkably, do not alter the observed work function change (Φ(trans)-Φ(cis)). Theoretical calculations provided a complementary insight crucial to attain a deeper knowledge on the origin of the work function photo-modulation.

KSC-2011-5119

NASA Image and Video Library

2011-07-07

CAPE CANAVERAL, Fla. -- Kennedy Space Center Director Bob Cabana, left, Mark Sirangelo, head of Sierra Nevada Space Systems (SNSS) of Sparks, Nev., and NASA Administrator Charlie Bolden pose for a photo after signing a Space Act Agreement that will offer the company technical capabilities from Kennedy's uniquely skilled work force. Kennedy will help Sierra Nevada with the ground operations support of its lifting body reusable spacecraft called "Dream Chaser," which resembles a smaller version of the space shuttle orbiter. The spacecraft would carry as many as seven astronauts to the space station. Through the new agreement, Kennedy's work force will use its experience of processing the shuttle fleet for 30 years to help Sierra Nevada define and execute Dream Chaser's launch preparations and post-landing activities. In 2010 and 2011, Sierra Nevada was awarded grants as part of the initiative to stimulate the private sector in developing and demonstrating human spaceflight capabilities for NASA's Commercial Crew Program. The goal of the program, which is based in Florida at Kennedy, is to facilitate the development of a U.S. commercial crew space transportation capability by achieving safe, reliable and cost-effective access to and from the space station and future low Earth orbit destinations. Photo credit: NASA/Jim Grossmann

The Other Quiet Professionals: Lessons for Future Cyber Forces from the Evolution of Special Forces

DTIC Science & Technology

2014-01-01

Special Forces, Rangers, civil affairs, and psychological operations units—under the new command. Furthermore, the army provided Special Forces with...and 10th Special Forces (Airborne) groups; the 4th Psychological Operations Group, 96th Civil Affairs Battalion; the 75th Ranger Regiment; the 160th...and reserve psychological operations and civil affairs units. Similarly, the Navy sought to withhold U.S. Naval Special Warfare forces, arguing that

U.S. Department of Energy, Illness and Injury Surveillance Program, Worker Health Summary, 1995-2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

The Department of Energy’s (DOE) Illness and Injury Surveillance Program has created an opportunity to assess illness and injury rates and patterns among workers at participating sites for well over a decade. The Worker Health Summary introduces an additional perspective on worker health with the introduction of analyses comparing the experience of sites in different program offices and a focus on time trends covering a decade of worker illness and injury experience. These analyses by program office suggest that illness and injury patterns among National Nuclear Security Administration (NNSA) workers diverge in many ways from those seen among Environmental Managementmore » (EM) and Science workers for reasons not yet understood. These differences will receive further investigation in future special focus studies, as will other findings of interest. With the time depth now available in our data, the Worker Health Summary reveals an additional nuance in worker health trends: changing health patterns in a specialized and skilled but aging work force. Older workers are becoming an increasing percentage of the work force, and their absence rates for diseases such as diabetes and hypertension are increasing as well. The impact of these emerging health issues, if properly addressed, can be managed to maintain or even enhance worker health and productivity. Prevention strategies designed to reduce the toll of these health conditions appear warranted, and this report gives us an indication of where to focus them. The analyses that follow reflect the Illness and Injury Surveillance Program’s continued commitment to apply a public health perspective in protecting the health of DOE’s work force.« less

The Potential Radiative Forcing of Global Land Use and Land Cover Change Activities

NASA Astrophysics Data System (ADS)

Ward, D. S.; Mahowald, N. M.; Kloster, S.

2014-12-01

Given the expected increase in pressure on land resources over the next century, there is a need to understand the total impacts of activities associated with land use and land cover change (LULCC). Here we quantify these impacts using the radiative forcing metric, including forcings from changes in long-lived greenhouse gases, tropospheric ozone, aerosol effects, and land surface albedo. We estimate radiative forcings from the different agents for historical LULCC and for six future projections using simulations from the National Center for Atmospheric Research Community Land Model and Community Atmosphere Models and additional offline analyses. When all forcing agents are considered together we show that 45% (+30%, -20%) of the present-day (2010) anthropogenic radiative forcing can be attributed to LULCC. Changes in the emission of non-CO2 greenhouse gases and aerosols from LULCC enhance the total LULCC radiative forcing by a factor of 2 to 3 with respect to the forcing from CO2 alone. In contrast, the non-CO2 forcings from fossil fuel burning are roughly neutral, due largely to the negative (cooling) impact of aerosols from these sources. We partition the global LULCC radiative forcing into three major sources: direct modification of land cover (e.g. deforestation), agricultural activities, and fire regime changes. Contributions from deforestation and agriculture are roughly equal in the present day, while changes to wildfire activity impose a small negative forcing globally. In 2100, deforestation activities comprise the majority of the LULCC radiative forcing for all projections except one (Representative Concentration Pathway (RCP) 4.5). This suggests that realistic scenarios of future forest area change are essential for projecting the contribution of LULCC to climate change. However, the commonly used RCP land cover change projections all include decreases in global deforestation rates over the next 85 years. To place an upper bound on the potential radiative forcing from LULCC we create a 'worst-case scenario" in which all arable land is converted to agriculture by the year 2100. This scenario leads to a total radiative forcing of 4.3 Wm-2 (+/- 1 Wm-2) suggesting that well thought-out land policy is needed to minimize future increases in global anthropogenic radiative forcing.

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

48 CFR 223.570 - Drug-free work force.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Drug-free work force. 223.570 Section 223.570 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Drug-Free Workplace 223.570 Drug-free work force. ...

Space Tracking and Surveillance System (STSS) Cryogenic Technology Efforts and Needs

NASA Astrophysics Data System (ADS)

Kolb, I. L.; Curran, D. G. T.; Lee, C. S.

2004-06-01

The Missile Defense Agency's (MDA) STSS program, the former Space Based Infrared Systems (SBIRS) Low, has been actively supporting and working to advance space-borne cryocooler technology through efforts with the Air Force Research Lab (AFRL) and Small Business Innovation Research (SBIR) program. The envisioned infrared satellite system requires high efficiency, low power, and low weight cooling in a range of temperature and cooling loads below 120K for reliable 10-year operation to meet mission needs. This paper describes cryocooler efforts previously and currently supported by STSS and the possible future cryogenic requirements for later technology insertion.

The influence of ethics on leadership.

PubMed

Kraemer, A M

1995-05-01

Value driven ethical leadership is needed today. The housekeeping field employs a diverse work force, and managers must develop and empower workers to attain organization goals. As managers, we must understand and develop our personal value structures that affect our decision making. This paper reviews Lawrence Kohlberg's study of moral behavior and how those stages are relevant to ethical management practices. It also addresses ways to overcome some obstacles in understanding and dealing with personal values that may threaten moral and ethical practices. Mature ethical principles and good communication are the foundation for and foster strong leadership for the future.

Exploring the Integration of Computational Modeling in the ASU Modeling Curriculum

NASA Astrophysics Data System (ADS)

Schatz, Michael; Aiken, John; Burk, John; Caballero, Marcos; Douglas, Scott; Thoms, Brian

2012-03-01

We describe the implementation of computational modeling in a ninth grade classroom in the context of the Arizona Modeling Instruction physics curriculum. Using a high-level programming environment (VPython), students develop computational models to predict the motion of objects under a variety of physical situations (e.g., constant net force), to simulate real world phenomenon (e.g., car crash), and to visualize abstract quantities (e.g., acceleration). We discuss how VPython allows students to utilize all four structures that describe a model as given by the ASU Modeling Instruction curriculum. Implications for future work will also be discussed.

Well-Being With Soul: Science in Pursuit of Human Potential.

PubMed

Ryff, Carol D

2018-03-01

This essay examines core contributions of a model of psychological well-being that has had widespread scientific impact. It drew on distant formulations to identify new dimensions and measures for assessing what it means to be well. Key themes among the more than 750 studies using the model are sketched, followed by reflections about why there has been so much interest in this eudaimonic approach to well-being. A final section looks to the future, proposing new directions to illuminate the forces that work against the realization of human potential as well as those that nurture human flourishing and self-realization.

United States Air Force Summer Research Program 1991. Graduate Student Research Program (GSRP) Reports. Volume 8. Rome Laboratory, Arnold Engineering Development Center, F. J. Seiler Research Laboratory

DTIC Science & Technology

1992-01-09

and reliability and it concludes with a discussion of possible applications to the IMS prototype design. 1-2 AcknowledQements I would like to thank the...technologies and procedures such as cut-vertex set analysis, the results of which may lead to future applications of this work in network management. 1... mathematically as follows. If the distance between the atoms of the surface is d and the wave is scattered it an angle 9 (measured from the surface

Strategies for treatment of dystonia.

PubMed

Dressler, Dirk; Altenmueller, Eckart; Bhidayasiri, Roongroj; Bohlega, Saeed; Chana, Pedro; Chung, Tae Mo; Frucht, Steven; Garcia-Ruiz, Pedro J; Kaelin, Alain; Kaji, Ryuji; Kanovsky, Petr; Laskawi, Rainer; Micheli, Federico; Orlova, Olga; Relja, Maja; Rosales, Raymond; Slawek, Jaroslaw; Timerbaeva, Sofia; Warner, Thomas T; Saberi, Fereshte Adib

2016-03-01

Treatment of dystonias is generally symptomatic. To produce sufficient therapy effects, therefore, frequently a multimodal and interdisciplinary therapeutic approach becomes necessary, combining botulinum toxin therapy, deep brain stimulation, oral antidystonic drugs, adjuvant drugs and rehabilitation therapy including physiotherapy, occupational therapy, re-training, speech therapy, psychotherapy and sociotherapy. This review presents the recommendations of the IAB-Interdisciplinary Working Group for Movement Disorders Special Task Force on Interdisciplinary Treatment of Dystonia. It reviews the different therapeutic modalities and outlines a strategy to adapt them to the dystonia localisation and severity of the individual patient. Hints to emerging and future therapies will be given.

Internal Aspects of the Skill Transfer of Manual Assembly Work

ERIC Educational Resources Information Center

Doyo, Daisuke

2009-01-01

In manual assembly work, parts are often assembled by applying force with a simple tool or by hand. A worker thus needs control the force he or she applies in working, as an appropriate level of force is requisite for minimizing work failures and improving efficiency. The object of this study is to clarify the relationship between the level of…

Employment in Perspective: Women in the Labor Force. Third Quarter 1988. Report 758.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

The female share of the older work force has nearly doubled since 1950. In 1987, the 6.2 million women aged 55 and over in the labor force constituted 4 of every 10 older workers. Because young women today have a stronger work attachment than did their mothers and grandmothers, the female share of the older work force is likely to continue to…

Joint Operating Environment 2035: The Joint Force in a Contested and Disordered World

DTIC Science & Technology

2016-07-14

environment. Next, Section 2 explores how the intersection and interaction of these changes might impact the character of war in the future. Finally, Section...ideas about how changes to conflict and war might impact the capabilities and operational approaches required by the future Joint Force. These...1 Colin Gray, Another Bloody Century, (2005), p. 43. 2 challenges that will impact the

Air Force Smart Bases

DTIC Science & Technology

2017-10-19

the future. Then to design an information and data architecture to enable many use cases for further mission experimentation and acquisition strategy...development. A key feature of the future of smart cities (or, in our case , smart bases) is that citizen engagement with one another and with their...cybersecurity on Air Force installations. Participants The design sprint brought in over 30 participants from across the military and industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freifeld, Barry M.; Oldenburg, Curtis M.; Jordan, Preston

Introduction Motivation The 2015-2016 Aliso Canyon/Porter Ranch natural gas well blowout emitted approximately 100,000 tonnes of natural gas (mostly methane, CH 4) over four months. The blowout impacted thousands of nearby residents, who were displaced from their homes. The high visibility of the event has led to increased scrutiny of the safety of natural gas storage at the Aliso Canyon facility, as well as broader concern for natural gas storage integrity throughout the country. Federal Review of Well Integrity In April of 2016, the U.S. Department of Energy (DOE), in conjunction with the U.S. Department of Transportation (DOT) through themore » Pipeline and Hazardous Materials Safety Administration (PHMSA), announced the formation of a new Interagency Task Force on Natural Gas Storage Safety. The Task Force enlisted a group of scientists and engineers at the DOE National Laboratories to review the state of well integrity in natural gas storage in the U.S. The overarching objective of the review is to gather, analyze, catalogue, and disseminate information and findings that can lead to improved natural gas storage safety and security and thus reduce the risk of future events. The “Protecting our Infrastructure of Pipelines and Enhancing Safety Act of 2016’’ or the ‘‘PIPES Act of 2016,’’which was signed into law on June 22, 2016, created an Aliso Canyon Natural Gas Leak Task Force led by the Secretary of Energy and consisting of representatives from the DOT, Environmental Protection Agency (EPA), Department of Health and Human Services, Federal Energy Regulatory Commission (FERC), Department of Commerce and the Department of Interior. The Task Force was asked to perform an analysis of the Aliso Canyon event and make recommendations on preventing similar incidents in the future. The PIPES Act also required that DOT/PHMSA promulgate minimum safety standards for underground storage that would take effect within two years. Background on the DOE National Laboratories Well Integrity Work Group One of the primary areas that the Task Force is studying is integrity of natural gas wells at storage facilities. The DOE Office of Fossil Energy (FE) took the lead in this area and asked scientists and engineers from the National Energy Technology Laboratory (NETL), Lawrence Livermore National Laboratory (LLNL), Sandia National Laboratories (SNL), and Lawrence Berkeley National Laboratory (LBNL)) to form a Work Group to address this area. This Work Group is an expansion of the original “Lab Team” comprising scientists and engineers from SNL, LLNL, and LBNL which was formed to support the State of California’s response to the Aliso Canyon incident and operated under the Governor of California’s Aliso Canyon Emergency Order (1/6/2016). The Lab Team played a key role in advising the State of California’s Department of Conservation (DOC) in its oversight of SoCalGas during and after the incident.« less

Exploration of the utility of military man in space in the year 2025

NASA Astrophysics Data System (ADS)

Hansen, Daniel L.

1992-03-01

It is absolutely essential for the well being of today's space forces as well as the future space forces of 2025, that DOD develop manned advanced technology space systems in lieu of or in addition to unmannned systems to effectively utilize mulitary man's compelling and aggressive warfighting abilities to accomplish the critical wartime mission elements of space control and force application. National space policy, military space doctrine and common all dictate they should do so if space superiority during future, inevitable conflict with enemy space forces is the paramount objective. Deploying military man in space will provide that space superiority and he will finally become the 'center of gravity' of the U.S. space program.

Defining climate change scenario characteristics with a phase space of cumulative primary energy and carbon intensity

NASA Astrophysics Data System (ADS)

Ritchie, Justin; Dowlatabadi, Hadi

2018-02-01

Climate change modeling relies on projections of future greenhouse gas emissions and other phenomena leading to changes in planetary radiative forcing. Scenarios of socio-technical development consistent with end-of-century forcing levels are commonly produced by integrated assessment models. However, outlooks for forcing from fossil energy combustion can also be presented and defined in terms of two essential components: total energy use this century and the carbon intensity of that energy. This formulation allows a phase space diagram to succinctly describe a broad range of possible outcomes for carbon emissions from the future energy system. In the following paper, we demonstrate this phase space method with the Representative Concentration Pathways (RCPs) as used in the Intergovernmental Panel on Climate Change (IPCC) Fifth Assessment Report (AR5). The resulting RCP phase space is applied to map IPCC Working Group III (WGIII) reference case ‘no policy’ scenarios. Once these scenarios are described as coordinates in the phase space, data mining techniques can readily distill their core features. Accordingly, we conduct a k-means cluster analysis to distinguish the shared outlooks of these scenarios for oil, gas and coal resource use. As a whole, the AR5 database depicts a transition toward re-carbonization, where a world without climate policy inevitably leads to an energy supply with increasing carbon intensity. This orientation runs counter to the experienced ‘dynamics as usual’ of gradual decarbonization, suggesting climate change targets outlined in the Paris Accord are more readily achievable than projected to date.

Representing agriculture in Earth System Models: Approaches and priorities for development

NASA Astrophysics Data System (ADS)

McDermid, S. S.; Mearns, L. O.; Ruane, A. C.

2017-09-01

Earth System Model (ESM) advances now enable improved representations of spatially and temporally varying anthropogenic climate forcings. One critical forcing is global agriculture, which is now extensive in land-use and intensive in management, owing to 20th century development trends. Agriculture and food systems now contribute nearly 30% of global greenhouse gas emissions and require copious inputs and resources, such as fertilizer, water, and land. Much uncertainty remains in quantifying important agriculture-climate interactions, including surface moisture and energy balances and biogeochemical cycling. Despite these externalities and uncertainties, agriculture is increasingly being leveraged to function as a net sink of anthropogenic carbon, and there is much emphasis on future sustainable intensification. Given its significance as a major environmental and climate forcing, there now exist a variety of approaches to represent agriculture in ESMs. These approaches are reviewed herein, and range from idealized representations of agricultural extent to the development of coupled climate-crop models that capture dynamic feedbacks. We highlight the robust agriculture-climate interactions and responses identified by these modeling efforts, as well as existing uncertainties and model limitations. To this end, coordinated and benchmarking assessments of land-use-climate feedbacks can be leveraged for further improvements in ESM's agricultural representations. We suggest key areas for continued model development, including incorporating irrigation and biogeochemical cycling in particular. Last, we pose several critical research questions to guide future work. Our review focuses on ESM representations of climate-surface interactions over managed agricultural lands, rather than on ESMs as an estimation tool for crop yields and productivity.

Classification of Chronic Obstructive Pulmonary Disease (COPD) according to the new Global Initiative for Chronic Obstructive Lung Disease (GOLD) 2017: Comparison with GOLD 2011.

PubMed

Marçôa, Raquel; Rodrigues, Daniela Marta; Dias, Margarida; Ladeira, Inês; Vaz, Ana Paula; Lima, Ricardo; Guimarães, Miguel

2018-02-01

Chronic Obstructive Pulmonary Disease (COPD) is a major cause of morbidity and mortality worldwide. The Global Initiative for Chronic Obstructive Lung Disease (GOLD) project has been working to improve awareness, prevention and management of this disease. The aim of this study is to evaluate how COPD patients are reclassified by the 2017 GOLD system (versus GOLD 2011), to calculate the level of agreement between these two classifications in allocation to categories and to compare the performance of each classification to predict future exacerbations. Two-hundred COPD patients (>40 years, post bronchodilator forced expiratory volume in one second/forced vital capacity<0.7) followed in pulmonology consultation were recruited into this prospective multicentric study. Approximately half of the patients classified as GOLD D [2011] changed to GOLD B [2017]. The extent of agreement between GOLD 2011 and GOLD 2017 was moderate (Cohen's Kappa = 0.511; p < 0.001) and the ability to predict exacerbations was similar (69.7% and 67.6%, respectively). GOLD B [2017] exacerbated 17% more than GOLD B [2011] and had a lower percent predicted post bronchodilator forced expiratory volume in one second (FEV1). GOLD B [2017] turned to be the predominant category, more heterogeneous and with a higher risk of exacerbation versus GOLD B [2011]. Physicians should be cautious in assessing the GOLD B [2017] patients. The assessment of patients should always be personalized. More studies are needed to evaluate the impact of the 2017 reclassification in predicting outcomes such as future exacerbations and mortality.

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

14 CFR 151.51 - Performance of construction work: Sponsor force account.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Performance of construction work: Sponsor force account. 151.51 Section 151.51 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Development Projects § 151.51 Performance of construction work: Sponsor force account. (a) Before undertaking...

Honeywell's Working Parents Task Force. Final Report and Recommendations.

ERIC Educational Resources Information Center

Honeywell, Inc., Minneapolis, Minn.

This publication provides a summary of the Honeywell Working Parent Task Force's recommendations on how to solve problems experienced by working parents. The Task Force consisted of three committees: the Employment Practices Committee (EPC); the Parent Education Committee (PEC); and the Child Care Facilities Committee (CCFC). After examining a…

Workforce Education: Issues for the New Century.

ERIC Educational Resources Information Center

Pautler, Albert J., Jr.

This paper is intended to guide small groups of vocational educators in discussions regarding work force education issues for the next century. The following work force issues are suggested: the aging work force; vocational education's role in reforming K-12 education; distance education for technical education programs; the labor shortages…

78 FR 67132 - GPS Satellite Simulator Control Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Space and Missile Systems Center, Global Positioning Systems (GPS) Directorate, Air Force... Control Working Group (SSCWG) meeting on 6 December 2013 from 0900-1300 PST at Los Angeles Air Force Base...

The Combined Arms Maneuver-Force and the Stability and Support-Force: A Dual Force Concept to Meet the Challenges of Future Operations

DTIC Science & Technology

2013-06-13

allowing rapid response to unforeseen crises. This includes sending forces to assist in the disaster relief operations after the October 2005 earthquake...a need for other capabilities. PACOM was able to provide disaster relief support to Japan immediately after their epic triple disaster in eastern...

Back to the Future: Does History Support the Expeditionary Air Force Concept?

DTIC Science & Technology

2000-04-01

Operations Forces 550, “Agile Combat Support,” Mr. Ron Orr, USAF/IL, 2 Feb 00. 4 Davis, pg. 11. 5 Toulmin , H.A., Jr., Air Service, American...John A., “The Expeditionary Air Force Takes Shape,” Air Force Magazine, Vol. 80, No. 6, June 1997. Toulmin , H.A., Jr., Air Service, American

Operation Watchtower: The Battle for Guadalcanal -- A Foundation for Future USAF Expeditionary Aerospace Force (EAF) Logistics Transformation

DTIC Science & Technology

2000-01-01

1 Colonel Dave Gillett , “Operation Allied Force After-Action,” lecture presented at...Force Commander, Rear Admiral Leigh Noyes, Carrier Forces Commander, and Rear Admiral John McCain, Shore-Based Aircraft Commander. The sole Marine...17 John Miller Jr. Guadalcanal: The First Offensive (Washington D.C.: Center of

Key drivers of ozone change and its radiative forcing over the 21st century

NASA Astrophysics Data System (ADS)

Iglesias-Suarez, Fernando; Kinnison, Douglas E.; Rap, Alexandru; Maycock, Amanda C.; Wild, Oliver; Young, Paul J.

2018-05-01

Over the 21st century changes in both tropospheric and stratospheric ozone are likely to have important consequences for the Earth's radiative balance. In this study, we investigate the radiative forcing from future ozone changes using the Community Earth System Model (CESM1), with the Whole Atmosphere Community Climate Model (WACCM), and including fully coupled radiation and chemistry schemes. Using year 2100 conditions from the Representative Concentration Pathway 8.5 (RCP8.5) scenario, we quantify the individual contributions to ozone radiative forcing of (1) climate change, (2) reduced concentrations of ozone depleting substances (ODSs), and (3) methane increases. We calculate future ozone radiative forcings and their standard error (SE; associated with inter-annual variability of ozone) relative to year 2000 of (1) 33 ± 104 m Wm-2, (2) 163 ± 109 m Wm-2, and (3) 238 ± 113 m Wm-2 due to climate change, ODSs, and methane, respectively. Our best estimate of net ozone forcing in this set of simulations is 430 ± 130 m Wm-2 relative to year 2000 and 760 ± 230 m Wm-2 relative to year 1750, with the 95 % confidence interval given by ±30 %. We find that the overall long-term tropospheric ozone forcing from methane chemistry-climate feedbacks related to OH and methane lifetime is relatively small (46 m Wm-2). Ozone radiative forcing associated with climate change and stratospheric ozone recovery are robust with regard to background climate conditions, even though the ozone response is sensitive to both changes in atmospheric composition and climate. Changes in stratospheric-produced ozone account for ˜ 50 % of the overall radiative forcing for the 2000-2100 period in this set of simulations, highlighting the key role of the stratosphere in determining future ozone radiative forcing.

Protecting Future Biodiversity via Re-allocation of Future Land-use Change Patterns

NASA Astrophysics Data System (ADS)

Chini, L. P.; Hurtt, G. C.; Jantz, S.; Brooks, T.; Leon, C.; Waldhoff, S.; Edmonds, J.

2013-12-01

Future scenarios, such as the Representative Concentration Pathways (RCPs), are typically designed to meet a radiative forcing target while also producing enough food and energy for a growing population. In the assessment process, impacts of these scenarios for other important variables such as biodiversity loss are considered 'downstream', after the future climate has been simulated within Earth System Models. However, the direct land-use impacts associated with future scenarios often have as much impact on these issues as the changing climate; in addition, many different patterns of land-use can result in the same radiative forcing target. In the case of biodiversity loss, one of the greatest contributors to species extinction is the loss of habitat such as primary forest, which is a direct result of land-use change decisions. By considering issues such as the preservation of future biodiversity 'up-front' in the scenario process, we can design a scenario that not only meets a radiative forcing target and feeds a growing planet, but also preserves as much habitat as possible through careful spatial allocation of future land-use change. Our Global Land-use Model (GLM) is used to provide 'harmonized' land-use data for the RCP process. GLM preserves as much information as possible from the Integrated Assessment Models (IAMs) while spatially allocating regional IAM land-use change data, ensuring a continuous transition from historical to future land-use states, and producing annual, gridded (0.5°×0.5°), fractional land-use states and all associated transitions. In this presentation we will present results from new GLM simulations in which land-use change decisions are constrained to meet the mutual goals of protecting important eco-regions (e.g. biodiversity hotspots) from future land-use change, providing enough food and fiber for a growing planet, and remaining consistent with the radiative forcing targets of the future scenarios. Trade-offs between agricultural demand and biodiversity protection were needed in some scenarios, but by constraining the land-use decisions to protect future biodiversity, an estimated 10-25% of species could be saved from loss between 2005 and 2100 (Jantz et al. 2013, in prep).

The Detection and Attribution Model Intercomparison Project (DAMIP v1.0) contribution to CMIP6

NASA Astrophysics Data System (ADS)

Gillett, Nathan P.; Shiogama, Hideo; Funke, Bernd; Hegerl, Gabriele; Knutti, Reto; Matthes, Katja; Santer, Benjamin D.; Stone, Daithi; Tebaldi, Claudia

2016-10-01

Detection and attribution (D&A) simulations were important components of CMIP5 and underpinned the climate change detection and attribution assessments of the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. The primary goals of the Detection and Attribution Model Intercomparison Project (DAMIP) are to facilitate improved estimation of the contributions of anthropogenic and natural forcing changes to observed global warming as well as to observed global and regional changes in other climate variables; to contribute to the estimation of how historical emissions have altered and are altering contemporary climate risk; and to facilitate improved observationally constrained projections of future climate change. D&A studies typically require unforced control simulations and historical simulations including all major anthropogenic and natural forcings. Such simulations will be carried out as part of the DECK and the CMIP6 historical simulation. In addition D&A studies require simulations covering the historical period driven by individual forcings or subsets of forcings only: such simulations are proposed here. Key novel features of the experimental design presented here include firstly new historical simulations with aerosols-only, stratospheric-ozone-only, CO2-only, solar-only, and volcanic-only forcing, facilitating an improved estimation of the climate response to individual forcing, secondly future single forcing experiments, allowing observationally constrained projections of future climate change, and thirdly an experimental design which allows models with and without coupled atmospheric chemistry to be compared on an equal footing.

SU-D-213AB-06: Surface Texture and Insertion Speed Effect on Needle Friction.

PubMed

Abdullah, A; Golecki, C; Barnett, A; Moore, J

2012-06-01

High frictional forces between the needle surface and tissue cause tissue deflection which hinders accurate needle placement for procedures such as brachytherapy and needle biopsy. Accurate needle placement isimportant to maximize procedure efficacy. This work investigates how needle surface roughness and insertion speed affect the frictional forcebetween a needle and tissue. A friction experiment was conducted to measure the force of friction between bovine liver and three 11 gauge needles having Ra surface roughness of 3.43, 1.33, and 0.2 μm. Each of the three needles were mounted on a linear slide and were advanced and retracted through bovine liver at speeds of 50, 100, 150, and 200 mm/s for a total of 12 trials. In each trial the needle was advanced and retracted in 10 cycles producing a steady state insertion force and a steady state retraction force for each cycle. A force sensor connecting the needle to the linear slide recorded the resistance force of the needle sliding through the liver. The liver was mounted in a box with a pneumatic cylinder which compressed the liver sample by 11.65 kPa. The roughest needle (Ra = 3.43 μm) on average produced 68, 73, 74, and 73% lower friction force than the smoothest needle (Ra = 0.2 μm) for the speeds of 50, 100, 150, and 200mm/s, respectively. The second roughest needle (Ra = 1.33 μm) on average produced 25, 45, 60 and 64% lower friction force than the smoothest needle (Ra = 0.2 μm) for the speeds of 50, 100, 150, and 200 mm/s, respectively. Rougher needle surface texture and higher insertion speed reduced frictional forces between the tissue and the needle. Future studies will examine how frictional forces can be modeled and predicted given surface texture and insertion speed. © 2012 American Association of Physicists in Medicine.

Workplace Outcomes in Work-Disability Prevention Research: A Review with Recommendations for Future Research.

PubMed

Young, Amanda E; Viikari-Juntura, Eira; Boot, Cécile R L; Chan, Chetwyn; de Porras, David Gimeno Ruiz; Linton, Steven J

2016-12-01

Introduction Outcome assessment is a central issue in work disability prevention research. The goal of this paper was to (1) ascertain the most salient workplace outcomes; (2) evaluate the congruence between business and science perspectives; (3) illustrate new perspectives on assessing longitudinal outcomes; and (4) provide recommendations for advancing outcome evaluation in this area of research. Methods The authors participated in a year-long collaboration that culminated in a sponsored 3-day conference, "Improving Research of Employer Practices to Prevent Disability", held October 14-16, 2015, in Hopkinton, MA, USA. The collaboration included a topical review of the literature, group conference calls to identify key areas and challenges, drafting of initial documents, review of industry publications, and a conference presentation that included feedback from peer researchers and a question/answer session with a special panel of knowledge experts with direct employer experience. Results Numerous workplace work-disability prevention outcome measures were identified. Analysis indicated that their applicability varied depending on the type of work disability the worker was experiencing. For those who were working, but with health-related work limitations (Type 1), predominant outcomes were measures of productivity, presenteeism, and work-related limitations. For those who were off work due to a health condition (Type 2), predominant outcomes were measures of time off work, supervisor/employee interactions, and return-to-work (RTW) preparation. For those who had returned to work (Type 3), predominant outcomes were measures of presenteeism, time until RTW, percentage of work resumption, employment characteristics, stigma, work engagement, co-worker interactions, and sustained or durable RTW. For those who had withdrawn from the labor force (Type 4), predominant outcomes were cost and vocational status. Discussion Currently available measures provide a good basis to use more consistent outcomes in disability prevention in the future. The research area would also benefit from more involvement of employers as stakeholders, and multilevel conceptualizations of disability outcomes.

The Changing Work Force. Trends and Issues Alerts.

ERIC Educational Resources Information Center

Lankard, Bettina A.

Economic pressures, work force diversity, and advances in technology are changing the nature of work and organizational policy and management. A predicted decline in the annual growth in gross national product is expected to trigger a slowdown in the labor force, especially in occupations that employ workers with only a high school education.…

[Fact Sheets on Working Women].

ERIC Educational Resources Information Center

National Commission on Working Women, Washington, DC.

These four fact sheets address a number of issues relating to women in the work force. The first, "An Overview of Women in the Work Force," offers a look at the numbers of women in the labor force, the occupational categories represented by women workers, women in professional and nonprofessional occupations, and women in nontraditional…

Sickness absence and sickness attendance--what people with neck or back pain think.

PubMed

Hansson, Margareta; Boström, Carina; Harms-Ringdahl, Karin

2006-05-01

This study explores the decision of 33 men and women to be sick-listed from work for neck pain or low-back pain. Qualitative interviews with the subjects, who lived in a city or a sparsely populated area of Sweden, were tape-recorded, transcribed and analysed in the interpretive tradition by the three authors. New, intense and threatening pain quickly made persons report sick. For other pain, sickness absence, its timing and duration, were negotiated on the basis of the subjects' self-image, work-duty norms, organisational and extra-organisational work factors. Thirty-one people aimed to return to work, but spine-related pain was a hindrance. Five strategies to avoid, delay or shorten sickness absence were identified. Concepts of the illness flexibility model well described how the workers balanced the factors driving them from work and those forcing them or attracting them to remain. The conclusion is that reporting sick is neither undertaken lightly nor for short-term reasons only. Instead, personal history and anticipated future, spine-related pain, workplace and labour market factors are also important considerations.

Total Force Restructuring Under Sequestration and Austere Budget Reductions

DTIC Science & Technology

2013-03-01

jointly released guidance on January 16, 2013 that addresses near-term expenditure reductions in an attempt to mitigate future risks .9 Guidance...implication for the Army is that the 6 force structure decisions are still forthcoming and will bear much risk directly related to future levels of...their benefits and risks . The alternatives are also underpinned by assumptions that are designed to enhance their scope and not provide limitations

Exercise BANYAN TREE II, 8-16 March 1960

DTIC Science & Technology

1960-04-23

confirmed that a composite air strike force was available for deployment to this command. c. At this time, participation in Banyan Tree II by Latin...participate in future exercises conducted in this area. b. That desired composition of forces for future exercises be determined sufficiently early to...channel ( VHP ) radio relay system was established between the Canal Zone and Rio Hato. Ter- minals were installed on Flamenco Island, Canal Zone and

Modulation of post-movement beta rebound by contraction force and rate of force development.

PubMed

Fry, Adam; Mullinger, Karen J; O'Neill, George C; Barratt, Eleanor L; Morris, Peter G; Bauer, Markus; Folland, Jonathan P; Brookes, Matthew J

2016-07-01

Movement induced modulation of the beta rhythm is one of the most robust neural oscillatory phenomena in the brain. In the preparation and execution phases of movement, a loss in beta amplitude is observed [movement related beta decrease (MRBD)]. This is followed by a rebound above baseline on movement cessation [post movement beta rebound (PMBR)]. These effects have been measured widely, and recent work suggests that they may have significant importance. Specifically, they have potential to form the basis of biomarkers for disease, and have been used in neuroscience applications ranging from brain computer interfaces to markers of neural plasticity. However, despite the robust nature of both MRBD and PMBR, the phenomena themselves are poorly understood. In this study, we characterise MRBD and PMBR during a carefully controlled isometric wrist flexion paradigm, isolating two fundamental movement parameters; force output, and the rate of force development (RFD). Our results show that neither altered force output nor RFD has a significant effect on MRBD. In contrast, PMBR was altered by both parameters. Higher force output results in greater PMBR amplitude, and greater RFD results in a PMBR which is higher in amplitude and shorter in duration. These findings demonstrate that careful control of movement parameters can systematically change PMBR. Further, for temporally protracted movements, the PMBR can be over 7 s in duration. This means accurate control of movement and judicious selection of paradigm parameters are critical in future clinical and basic neuroscientific studies of sensorimotor beta oscillations. Hum Brain Mapp 37:2493-2511, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Experimental Investigation of the Effect of the Driving Voltage of an Electroadhesion Actuator.

PubMed

Koh, Keng Huat; Sreekumar, M; Ponnambalam, S G

2014-06-25

This paper investigates the effect of driving voltage on the attachment force of an electroadhesion actuator, as the existing literature on the saturation of the adhesive force at a higher electric field is incomplete. A new type of electroadhesion actuator using normally available materials, such as aluminum foil, PVC tape and a silicone rubber sheet used for keyboard protection, has been developed with a simple layered structure that is capable of developing adhesive force consistently. The developed actuator is subjected to the experiment for the evaluation of various test surfaces; aluminum, brick, ceramic, concrete and glass. The driving high voltage is varied in steps to determine the characteristics of the output holding force. Results show a quadratic relation between F (adhesion force) and V (driving voltage) within the 2 kV range. After this range, the F - V responses consistently show a saturation trend at high electric fields. Next, the concept of the leakage current that can occur in the dielectric material and the corona discharge through air has been introduced. Results show that the voltage level, which corresponds to the beginning of the supply current, matches well with the beginning of the force saturation. With the confirmation of this hypothesis, a working model for electroadhesion actuation is proposed. Based on the experimental results, it is proposed that such a kind of actuator can be driven within a range of optimum high voltage to remain electrically efficient. This practice is recommended for the future design, development and characterization of electroadhesion actuators for robotic applications.

Experimental Investigation of the Effect of the Driving Voltage of an Electroadhesion Actuator

PubMed Central

Koh, Keng Huat; Sreekumar, M.; Ponnambalam, S. G.

2014-01-01

This paper investigates the effect of driving voltage on the attachment force of an electroadhesion actuator, as the existing literature on the saturation of the adhesive force at a higher electric field is incomplete. A new type of electroadhesion actuator using normally available materials, such as aluminum foil, PVC tape and a silicone rubber sheet used for keyboard protection, has been developed with a simple layered structure that is capable of developing adhesive force consistently. The developed actuator is subjected to the experiment for the evaluation of various test surfaces; aluminum, brick, ceramic, concrete and glass. The driving high voltage is varied in steps to determine the characteristics of the output holding force. Results show a quadratic relation between F (adhesion force) and V (driving voltage) within the 2 kV range. After this range, the F-V responses consistently show a saturation trend at high electric fields. Next, the concept of the leakage current that can occur in the dielectric material and the corona discharge through air has been introduced. Results show that the voltage level, which corresponds to the beginning of the supply current, matches well with the beginning of the force saturation. With the confirmation of this hypothesis, a working model for electroadhesion actuation is proposed. Based on the experimental results, it is proposed that such a kind of actuator can be driven within a range of optimum high voltage to remain electrically efficient. This practice is recommended for the future design, development and characterization of electroadhesion actuators for robotic applications. PMID:28788114

The impact of working technique on physical loads - an exposure profile among newspaper editors.

PubMed

Lindegård, A; Wahlström, J; Hagberg, M; Hansson, G-A; Jonsson, P; Wigaeus Tornqvist, E

2003-05-15

The aim of this study was to investigate the possible associations between working technique, sex, symptoms and level of physical load in VDU-work. A study group of 32 employees in the editing department of a daily newspaper answered a questionnaire, about physical working conditions and symptoms from the neck and the upper extremities. Muscular load, wrist positions and computer mouse forces were measured. Working technique was assessed from an observation protocol for computer work. In addition ratings of perceived exertion and overall comfort were collected. The results showed that subjects classified as having a good working technique worked with less muscular load in the forearm (extensor carpi ulnaris p=0.03) and in the trapezius muscle on the mouse operating side (p=0.02) compared to subjects classified as having a poor working technique. Moreover there were no differences in gap frequency (number of episodes when muscle activity is below 2.5% of a reference contraction) or muscular rest (total duration of gaps) between the two working technique groups. Women in this study used more force (mean force p=0.006, peak force p=0.02) expressed as % MVC than the men when operating the computer mouse. No major differences were shown in muscular load, wrist postures, perceived exertion or perceived comfort between men and women or between cases and symptom free subjects. In conclusion a good working technique was associated with reduced muscular load in the forearm muscles and in the trapezius muscle on the mouse operating side. Moreover women used more force (mean force and peak force) than men when operating the click button (left button) of the computer mouse.

Reduced muscle fiber force production and disrupted myofibril architecture in patients with chronic rotator cuff tears.

PubMed

Mendias, Christopher L; Roche, Stuart M; Harning, Julie A; Davis, Max E; Lynch, Evan B; Sibilsky Enselman, Elizabeth R; Jacobson, Jon A; Claflin, Dennis R; Calve, Sarah; Bedi, Asheesh

2015-01-01

A persistent atrophy of muscle fibers and an accumulation of fat, collectively referred to as fatty degeneration, commonly occur in patients with chronic rotator cuff tears. The etiology of fatty degeneration and function of the residual rotator cuff musculature have not been well characterized in humans. We hypothesized that muscles from patients with chronic rotator cuff tears have reduced muscle fiber force production, disordered myofibrils, and an accumulation of fat vacuoles. The contractility of muscle fibers from biopsy specimens of supraspinatus muscles of 13 patients with chronic full-thickness posterosuperior rotator cuff tears was measured and compared with data from healthy vastus lateralis muscle fibers. Correlations between muscle fiber contractility, American Shoulder and Elbow Surgeons (ASES) scores, and tear size were analyzed. Histology and electron microscopy were also performed. Torn supraspinatus muscles had a 30% reduction in maximum isometric force production and a 29% reduction in normalized force compared with controls. Normalized supraspinatus fiber force positively correlated with ASES score and negatively correlated with tear size. Disordered sarcomeres were noted, along with an accumulation of lipid-laden macrophages in the extracellular matrix surrounding supraspinatus muscle fibers. Patients with chronic supraspinatus tears have significant reductions in muscle fiber force production. Force production also correlates with ASES scores and tear size. The structural and functional muscle dysfunction of the residual muscle fibers is independent of the additional area taken up by fibrotic tissue. This work may help establish future therapies to restore muscle function after the repair of chronically torn rotator cuff muscles. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

NASA Astrophysics Data System (ADS)

Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

2017-09-01

The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

Effects of wide step walking on swing phase hip muscle forces and spatio-temporal gait parameters.

PubMed

Bajelan, Soheil; Nagano, Hanatsu; Sparrow, Tony; Begg, Rezaul K

2017-07-01

Human walking can be viewed essentially as a continuum of anterior balance loss followed by a step that re-stabilizes balance. To secure balance an extended base of support can be assistive but healthy young adults tend to walk with relatively narrower steps compared to vulnerable populations (e.g. older adults and patients). It was, therefore, hypothesized that wide step walking may enhance dynamic balance at the cost of disturbed optimum coupling of muscle functions, leading to additional muscle work and associated reduction of gait economy. Young healthy adults may select relatively narrow steps for a more efficient gait. The current study focused on the effects of wide step walking on hip abductor and adductor muscles and spatio-temporal gait parameters. To this end, lower body kinematic data and ground reaction forces were obtained using an Optotrak motion capture system and AMTI force plates, respectively, while AnyBody software was employed for muscle force simulation. A single step of four healthy young male adults was captured during preferred walking and wide step walking. Based on preferred walking data, two parallel lines were drawn on the walkway to indicate 50% larger step width and participants targeted the lines with their heels as they walked. In addition to step width that defined walking conditions, other spatio-temporal gait parameters including step length, double support time and single support time were obtained. Average hip muscle forces during swing were modeled. Results showed that in wide step walking step length increased, Gluteus Minimus muscles were more active while Gracilis and Adductor Longus revealed considerably reduced forces. In conclusion, greater use of abductors and loss of adductor forces were found in wide step walking. Further validation is needed in future studies involving older adults and other pathological populations.

Defining Conditions for the Use of Persistent Surveillance

DTIC Science & Technology

2009-12-01

as hard as the Air Force has worked the North Dakota and Ohio delegations,’ says Colonel Charles Bartlett, head of a special Air Force task force on...UAVs…While Richard Shelby , the Republican senator from Alabama, is concerned about the impact on Redstone Arsenal, which manages much of the Army’s...UAV work, Byron Dorgan, the North Dakota Democratic senator, wants to attract more work for Grand Forks Air Force base, partly to make up for the

Following aptamer-ricin specific binding by single molecule recognition and force spectroscopy measurements

USDA-ARS?s Scientific Manuscript database

The atomic force microscope (AFM) recognition and dynamic force spectroscopy (DFS) experiments provide both morphology and interaction information of the aptamer and protein, which can be used for the future study on the thermodynamics and kinetics properties of ricin-aptamer/antibody interactions. ...

Current and Emerging Forces Impacting Special Education.

ERIC Educational Resources Information Center

Yates, James R.

Using the methodology of force field analysis, the paper develops possible futures for special education based on current trends. Demographic forces impacting special education include age changes, ethnicity changes, the needs of emerging language minorities, specific change in the youth population, environmental factors and the incidence of…

New Labor Force Projections to 1990. Special Labor Force Report 197.

ERIC Educational Resources Information Center

Fullerton, Howard N., Jr.; Flaim, Paul O.

Prepared as part of the Bureau of Labor Statistics' periodic reassessment of its projections of the future growth trends of the various sectors of the American economy, new labor force projections to 1990 are presented based on trends in labor force participation as observed through 1975 and on the most recent population projections of the U.S.…

The food production and consumption balance in sub-Saharan Africa under different SSPs, from 2010 to 2050

NASA Astrophysics Data System (ADS)

Wada, Y.; Luan, Y.; Fischer, G.; Sun, L.; Shi, P.

2015-12-01

Forcing with the population growth and consequently increasing food requirement, food security in sub-Saharan Africa is one of the most emergent and challenging issues. The purposes of this work are 1) what's the future food requirement and their food security status in each sub-Saharan African countries? What is the distance from current and future food security status, corresponding to the food requirement, to the targeted food security status? 2) To what extent Sub-Saharan countries could meet their present and future food requirement, and whether they have potential to improve their food insecurity status on currently cultivated land? 3) Whether or, if there have, how the pressures on land resources from meeting the food requirements? To figure those questions out, we firstly use socio-economic pathways datasets, and historical food diet pattern classification to forecast the 2010-2050 food commodity and feed calories demand per country. A new food security indicator, which considered the influences of both the food energy and quality intake, was used to evaluate the food insecurity status and the distances to different targeted statuses of the specific country. The latest Global Agro-Ecological Zones (GAEZ) databases were used to estimate the current and future crop yield gap and crop potential production. For current to future scenario analysis, we considered population growth, dietary change, climate change, agricultural input level, and target food security status. Then the balance of food requirement with the current and potential crop production was analyzed for different scenarios. Land requirements were calculated for meeting those food requirements, and the pressures on land resources are evaluated. Our works are hoping to provide scientific-based evidences for policy recommendations for local government to tackle food insecurity problems in Sub-Saharan Africa.

Modeling the energetic and exergetic self-sustainability of societies with different structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sciubba, E.

1995-06-01

The paper examines global energy and exergy flows in various models of organized human societies: from primitive tribal organizations to teocratic/aristocratic societies, to the present industrial (and post-industrial) society, to possible future highly robotized or central control social organizations. The analysis focuses on the very general chain of technological processes connected to the extraction, conversion, distribution and final use of the real energetic content of natural resources (i.e., their exergy): the biological food chain is also considered, albeit in a very simplified and humankind sense. It is argued that, to sustain this chain of processes, it is necessary to usemore » a substantial portion of the final-use energy flow, and to employ a large portion of the total work force sustained by this end-use energy. It is shown that if these quantities can be related to the total exergy flow rate (from the source) and to the total available work force, then this functional relationship takes different forms in different types of society. The procedure is very general: each type of societal organization is reduced to a simple model for which energy and exergy flow diagrams are calculated, under certain well-defined assumptions, which restrain both the exchanges among the functional groups which constitute the model, and the exchanges with the environment. The results can be quantified using some assumptions/projections about energy consumption levels for different stages of technological development which are available in the literature; the procedure is applied to some models of primitive and pre-industrial societies, to the present industrial/post-industrial society, and to a hypothetical model of a future, high-technology society.« less

Implementing an X-ray validation pipeline for the Protein Data Bank

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gore, Swanand; Velankar, Sameer; Kleywegt, Gerard J., E-mail: gerard@ebi.ac.uk

2012-04-01

The implementation of a validation pipeline, based on community recommendations, for future depositions of X-ray crystal structures in the Protein Data Bank is described. There is an increasing realisation that the quality of the biomacromolecular structures deposited in the Protein Data Bank (PDB) archive needs to be assessed critically using established and powerful validation methods. The Worldwide Protein Data Bank (wwPDB) organization has convened several Validation Task Forces (VTFs) to advise on the methods and standards that should be used to validate all of the entries already in the PDB as well as all structures that will be deposited inmore » the future. The recommendations of the X-ray VTF are currently being implemented in a software pipeline. Here, ongoing work on this pipeline is briefly described as well as ways in which validation-related information could be presented to users of structural data.« less

Statistics of work performed on a forced quantum oscillator.

PubMed

Talkner, Peter; Burada, P Sekhar; Hänggi, Peter

2008-07-01

Various aspects of the statistics of work performed by an external classical force on a quantum mechanical system are elucidated for a driven harmonic oscillator. In this special case two parameters are introduced that are sufficient to completely characterize the force protocol. Explicit results for the characteristic function of work and the corresponding probability distribution are provided and discussed for three different types of initial states of the oscillator: microcanonical, canonical, and coherent states. Depending on the choice of the initial state the probability distributions of the performed work may greatly differ. This result in particular also holds true for identical force protocols. General fluctuation and work theorems holding for microcanonical and canonical initial states are confirmed.

Mitigated-force carriage for high magnetic field environments

DOEpatents

Ludtka, Gerard M.; Ludtka, Gail M.; Wilgen, John B.; Murphy, Bart L.

2015-05-19

A carriage for high magnetic field environments includes a plurality of work-piece separators disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla for supporting and separating a plurality of work-pieces by a preselected, essentially equal spacing, so that, as a first work-piece is inserted into the magnetic field, a second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

Development of a tuned interfacial force field parameter set for the simulation of protein adsorption to silica glass.

PubMed

Snyder, James A; Abramyan, Tigran; Yancey, Jeremy A; Thyparambil, Aby A; Wei, Yang; Stuart, Steven J; Latour, Robert A

2012-12-01

Adsorption free energies for eight host-guest peptides (TGTG-X-GTGT, with X = N, D, G, K, F, T, W, and V) on two different silica surfaces [quartz (100) and silica glass] were calculated using umbrella sampling and replica exchange molecular dynamics and compared with experimental values determined by atomic force microscopy. Using the CHARMM force field, adsorption free energies were found to be overestimated (i.e., too strongly adsorbing) by about 5-9 kcal/mol compared to the experimental data for both types of silica surfaces. Peptide adsorption behavior for the silica glass surface was then adjusted using a modified version of the CHARMM program, which we call dual force-field CHARMM, which allows separate sets of nonbonded parameters (i.e., partial charge and Lennard-Jones parameters) to be used to represent intra-phase and inter-phase interactions within a given molecular system. Using this program, interfacial force field (IFF) parameters for the peptide-silica glass systems were corrected to obtain adsorption free energies within about 0.5 kcal/mol of their respective experimental values, while IFF tuning for the quartz (100) surface remains for future work. The tuned IFF parameter set for silica glass will subsequently be used for simulations of protein adsorption behavior on silica glass with greater confidence in the balance between relative adsorption affinities of amino acid residues and the aqueous solution for the silica glass surface.

Development of a Tuned Interfacial Force Field Parameter Set for the Simulation of Protein Adsorption to Silica Glass

PubMed Central

Snyder, James A.; Abramyan, Tigran; Yancey, Jeremy A.; Thyparambil, Aby A.; Wei, Yang; Stuart, Steven J.; Latour, Robert A.

2012-01-01

Adsorption free energies for eight host–guest peptides (TGTG-X-GTGT, with X = N, D, G, K, F, T, W, and V) on two different silica surfaces [quartz (100) and silica glass] were calculated using umbrella sampling and replica exchange molecular dynamics and compared with experimental values determined by atomic force microscopy. Using the CHARMM force field, adsorption free energies were found to be overestimated (i.e., too strongly adsorbing) by about 5–9 kcal/mol compared to the experimental data for both types of silica surfaces. Peptide adsorption behavior for the silica glass surface was then adjusted using a modified version of the CHARMM program, which we call dual force-field CHARMM, which allows separate sets of nonbonded parameters (i.e., partial charge and Lennard-Jones parameters) to be used to represent intra-phase and inter-phase interactions within a given molecular system. Using this program, interfacial force field (IFF) parameters for the peptide-silica glass systems were corrected to obtain adsorption free energies within about 0.5 kcal/mol of their respective experimental values, while IFF tuning for the quartz (100) surface remains for future work. The tuned IFF parameter set for silica glass will subsequently be used for simulations of protein adsorption behavior on silica glass with greater confidence in the balance between relative adsorption affinities of amino acid residues and the aqueous solution for the silica glass surface. PMID:22941539

Forced Response Analysis of a Fan with Boundary Layer Inlet Distortion

NASA Technical Reports Server (NTRS)

Bakhle, Milind A.; Reddy, T. S. R.; Coroneos, Rula M.

2014-01-01

Boundary layer ingesting propulsion systems have the potential to significantly reduce fuel burn for future generations of commercial aircraft, but these systems must be designed to overcome the challenge of high dynamic stresses in fan blades due to forced response. High dynamic stresses can lead to high cycle fatigue failures. High-fidelity computational analysis of the fan aeromechanics is integral to an ongoing effort to design a boundary layer ingesting inlet and fan for a wind-tunnel test. An unsteady flow solution from a Reynoldsaveraged Navier Stokes analysis of a coupled inlet-fan system is used to calculate blade unsteady loading and assess forced response of the fan to distorted inflow. Conducted prior to the mechanical design of a fan, the initial forced response analyses performed in this study provide an early look at the levels of dynamic stresses that are likely to be encountered. For the boundary layer ingesting inlet, the distortion contains strong engine order excitations that act simultaneously. The combined effect of these harmonics was considered in the calculation of the forced response stresses. Together, static and dynamic stresses can provide the information necessary to evaluate whether the blades are likely to fail due to high cycle fatigue. Based on the analyses done, the overspeed condition is likely to result in the smallest stress margin in terms of the mean and alternating stresses. Additional work is ongoing to expand the analyses to off-design conditions, on-resonance conditions, and to include more detailed modeling of the blade structure.

Tracking an atmospheric river in a warmer climate: from water vapor to economic impacts

NASA Astrophysics Data System (ADS)

Dominguez, Francina; Dall'erba, Sandy; Huang, Shuyi; Avelino, Andre; Mehran, Ali; Hu, Huancui; Schmidt, Arthur; Schick, Lawrence; Lettenmaier, Dennis

2018-03-01

Atmospheric rivers (ARs) account for more than 75 % of heavy precipitation events and nearly all of the extreme flooding events along the Olympic Mountains and western Cascade Mountains of western Washington state. In a warmer climate, ARs in this region are projected to become more frequent and intense, primarily due to increases in atmospheric water vapor. However, it is unclear how the changes in water vapor transport will affect regional flooding and associated economic impacts. In this work we present an integrated modeling system to quantify the atmospheric-hydrologic-hydraulic and economic impacts of the December 2007 AR event that impacted the Chehalis River basin in western Washington. We use the modeling system to project impacts under a hypothetical scenario in which the same December 2007 event occurs in a warmer climate. This method allows us to incorporate different types of uncertainty, including (a) alternative future radiative forcings, (b) different responses of the climate system to future radiative forcings and (c) different responses of the surface hydrologic system. In the warming scenario, AR integrated vapor transport increases; however, these changes do not translate into generalized increases in precipitation throughout the basin. The changes in precipitation translate into spatially heterogeneous changes in sub-basin runoff and increased streamflow along the entire Chehalis main stem. Economic losses due to stock damages increase moderately, but losses in terms of business interruption are significant. Our integrated modeling tool provides communities in the Chehalis region with a range of possible future physical and economic impacts associated with AR flooding.

Increased future ice discharge from Antarctica owing to higher snowfall

NASA Astrophysics Data System (ADS)

Winkelmann, Ricarda; Levermann, Anders; Martin, Maria A.; Frieler, Katja

2013-04-01

Anthropogenic climate change is likely to cause continuing global sea-level rise, but some processes within the Earth system may mitigate the magnitude of the projected effect. Regional and global climate models simulate enhanced snowfall over Antarctica, which would provide a direct offset of the future contribution to global sea level rise from cryospheric mass loss and ocean expansion. Uncertainties exist in modelled snowfall, but even larger uncertainties exist in the potential changes of dynamic ice discharge from Antarctica. Here we show that snowfall and discharge are not independent, but that future ice discharge will increase by up to three times as a result of additional snowfall under global warming. Our results, based on an ice-sheet model forced by climate simulations through to the end of 2500, show that the enhanced discharge effect exceeds the effect of surface warming as well as that of basal ice-shelf melting, and is due to the difference in surface elevation change caused by snowfall on grounded versus floating ice. Although different underlying forcings drive ice loss from basal melting versus increased snowfall, similar ice dynamical processes are nonetheless at work in both; therefore results are relatively independent of the specific representation of the transition zone. In an ensemble of simulations designed to capture ice-physics uncertainty, the additional dynamic ice loss along the coastline compensates between 30 and 65 per cent of the ice gain due to enhanced snowfall over the entire continent. This results in a dynamic ice loss of up to 1.25 metres in the year 2500 for the strongest warming scenario.

Drought events in the Czech Republic: past, present, future

NASA Astrophysics Data System (ADS)

Brázdil, Rudolf; Trnka, Miroslav; Mikšovský, Jiří; Tolasz, Radim; Dobrovolný, Petr; Řezníčková, Ladislava; Dolák, Lukáš

2017-04-01

Droughts are, together with floods, the most important natural extremes in the Czech Republic. In the last c. 20 years even some irregular alternations of years with severe droughts on the one hand (2000, 2003, 2007, 2011-2012, 2014-2015) and severe floods on the other (1997, 1998, 2002, 2005, 2009, 2010, 2013), reflecting greater variability of the water cycle, can be observed. Great attention devoted to the study of past, present and future of droughts in the Czech Republic in a few last years allowed to obtain basic knowledge related to long-term spatial-temporal variability of droughts, combining dendrochronological, documentary and instrumental data, synoptic causes and climate forcings of droughts, case studies of important drought anomalies with significant social-economic consequences (like drought of 1947), impacts of droughts in agriculture, forestry or water management, and future droughts according to model estimates. Basic results obtained are summarised and documented by several typical examples. Such level of drought knowledge became a basis for formulation of the new research project, trying to analyse the climate forcings and triggers involved in the occurrence, course and severity of drought events in the Czech Republic in the context of Central Europe and explanations of their physical mechanisms, based on a 515-year series of drought indices reconstructed from documentary and instrumental data. Presentation of this new project for 2017-2019 is included in the second part of the paper. (This work was supported by Czech Science Foundation, project no. 17-10026S "Drought events in the Czech Republic and their causes".)

Neogeomorphology, prediction, and the anthropic landscape

NASA Astrophysics Data System (ADS)

Haff, P. K.

The surface of the earth is undergoing profound change due to human impact. By some measures the level of human impact is comparable to the effects of major classical geomorphic processes such as fluvial sediment transport. This change is occurring rapidly, has no geologic precedent, and may represent an irreversible transition to a new and novel landscape with which we have no experience. For these reasons prediction of future landscape evolution will be of increasing importance. The combination of physical and social forces that drive modern landscape change represents the Anthropic Force. Neogeomorphology is the study of the Anthropic Force and its present and likely future effects on the landscape. Unique properties associated with the Anthropic Force include consciousness, intention and design. These properties support the occurrence of nonclassical geomorphic phenomena, such as landscape planning, engineering, and management. The occurrence of short time-scale phenomena induced by anthropic landscape change, the direct effects of this change on society, and the ability to anticipate and intentionally influence the future trajectory of the global landscape underscore the importance of prediction in a neogeomorphic world.

America’s Army: The Strength of the Nation. 2010 Army Posture Statement

DTIC Science & Technology

2010-02-19

Task Force ARFORGEN Army Force Generation AFRICOM Africa Command AMAP Army Medical Action Plan AMC Army Material Command APS Army Prepositioned Stocks ...Facilities EBCT Evaluation Brigade Combat Team EOD Explosive Ordnance Disposal ES2 Every Soldier a Sensor ETF Enterprise Task Force FCS Future Combat

Task Force 1. Report of the Task Force on Patient Expectations, Core Values, Reintegration, and the New Model of Family Medicine

PubMed Central

Green, Larry A.; Graham, Robert; Bagley, Bruce; Kilo, Charles M.; Spann, Stephen J.; Bogdewic, Stephen P.; Swanson, John

2004-01-01

BACKGROUND To lay the groundwork for the development of a comprehensive strategy to transform and renew the specialty of family medicine, this Future of Family Medicine task force was charged with identifying the core values of family medicine, developing proposals to reform family medicine to meet consumer expectations, and determining systems of care to be delivered by family medicine in the future. METHODS A diverse, multidisciplinary task force representing a broad spectrum of perspectives and expertise analyzed and discussed published literature; findings from surveys, interviews, and focus groups compiled by research firms contracted to the Future of Family Medicine project; and analyses from The Robert Graham Center, professional societies in the United States and abroad, and others. Through meetings, conference calls, and writing, and revision of a series of subcommittee reports, the entire task force reached consensus on its conclusions and recommendations. These were reviewed by an external panel of experts and revisions were made accordingly. MAJOR FINDINGS After delivering on its promise to reverse the decline of general practice in the United States, family medicine and the nation face additional challenges to assure all people receive care that is safe, effective, patient-centered, timely, efficient, and equitable. Challenges the discipline needs to address to improve family physicians’ ability to make important further contributions include developing a broader, more accurate understanding of the specialty among the public and other health professionals, addressing the wide scope and variance in practice types within family medicine, winning respect for the specialty in academic circles, making family medicine a more attractive career option, and dealing with the perception that family medicine is not solidly grounded in science and technology. The task force set forth a proposed identity statement for family medicine, a basket of services that should be reliably provided in family medicine practices, and an itemization of key attributes and core values that define the specialty. It also proposed and described a New Model of family medicine for people of all ages and both genders that emphasizes patient-centered, evidence-based, whole-person care provided through a multidisciplinary team approach in settings that reduce barriers to access and use advanced information systems and other new technologies. The task force recommended a time of active experimentation to redesign the work and workplace of family physicians; the development of revised financial models for family medicine, and a national resource to provide assistance to individual practices moving to New Model practice; and cooperation with others pursuing the transformation of frontline medicine to better serve the public. CONCLUSIONS Unless there are changes in the broader health care system and within the specialty, the position of family medicine in the United States will be untenable in a 10- to 20-year time frame. Even within the constraints of today’s flawed health care system, there are major opportunities for family physicians to realize improved results for patients and economic success. A period of aggressive experimentation and redevelopment of family medicine is needed now. The future success of the discipline and its impact on public well-being depends in large measure on family medicine’s ability to rearticulate its vision and competencies in a fashion that has greater resonance with the public while substantially revising the organization and processes by which care is delivered. When accomplished, family physicians will achieve more fully the aspirations articulated by the specialty’s core values and contribute to the solution of the nation’s serious health care problems.

Experimental estimation of energy absorption during heel strike in human barefoot walking.

PubMed

Baines, Patricia M; Schwab, A L; van Soest, A J

2018-01-01

Metabolic energy expenditure during human gait is poorly understood. Mechanical energy loss during heel strike contributes to this energy expenditure. Previous work has estimated the energy absorption during heel strike as 0.8 J using an effective foot mass model. The aim of our study is to investigate the possibility of determining the energy absorption by more directly estimating the work done by the ground reaction force, the force-integral method. Concurrently another aim is to compare this method of direct determination of work to the method of an effective foot mass model. Participants of our experimental study were asked to walk barefoot at preferred speed. Ground reaction force and lower leg kinematics were collected at high sampling frequency (3000 Hz; 1295 Hz), with tight synchronization. The work done by the ground reaction force is 3.8 J, estimated by integrating this force over the foot-ankle deformation. The effective mass model is improved by dropping the assumption that foot-ankle deformation is maximal at the instant of the impact force peak. On theoretical grounds it is clear that in the presence of substantial damping that peak force and peak deformation do not occur simultaneously. The energy absorption results, due the vertical force only, corresponding to the force-integral method is similar to the results of the improved application of the effective mass model (2.7 J; 2.5 J). However the total work done by the ground reaction force calculated by the force-integral method is significantly higher than that of the vertical component alone. We conclude that direct estimation of the work done by the ground reaction force is possible and preferable over the use of the effective foot mass model. Assuming that energy absorbed is lost, the mechanical energy loss of heel strike is around 3.8 J for preferred walking speeds (≈ 1.3 m/s), which contributes to about 15-20% of the overall metabolic cost of transport.

Functional Inference of Complex Anatomical Tendinous Networks at a Macroscopic Scale via Sparse Experimentation

PubMed Central

Saxena, Anupam; Lipson, Hod; Valero-Cuevas, Francisco J.

2012-01-01

In systems and computational biology, much effort is devoted to functional identification of systems and networks at the molecular-or cellular scale. However, similarly important networks exist at anatomical scales such as the tendon network of human fingers: the complex array of collagen fibers that transmits and distributes muscle forces to finger joints. This network is critical to the versatility of the human hand, and its function has been debated since at least the 16th century. Here, we experimentally infer the structure (both topology and parameter values) of this network through sparse interrogation with force inputs. A population of models representing this structure co-evolves in simulation with a population of informative future force inputs via the predator-prey estimation-exploration algorithm. Model fitness depends on their ability to explain experimental data, while the fitness of future force inputs depends on causing maximal functional discrepancy among current models. We validate our approach by inferring two known synthetic Latex networks, and one anatomical tendon network harvested from a cadaver's middle finger. We find that functionally similar but structurally diverse models can exist within a narrow range of the training set and cross-validation errors. For the Latex networks, models with low training set error [<4%] and resembling the known network have the smallest cross-validation errors [∼5%]. The low training set [<4%] and cross validation [<7.2%] errors for models for the cadaveric specimen demonstrate what, to our knowledge, is the first experimental inference of the functional structure of complex anatomical networks. This work expands current bioinformatics inference approaches by demonstrating that sparse, yet informative interrogation of biological specimens holds significant computational advantages in accurate and efficient inference over random testing, or assuming model topology and only inferring parameters values. These findings also hold clues to both our evolutionary history and the development of versatile machines. PMID:23144601

Functional inference of complex anatomical tendinous networks at a macroscopic scale via sparse experimentation.

PubMed

Saxena, Anupam; Lipson, Hod; Valero-Cuevas, Francisco J

2012-01-01

In systems and computational biology, much effort is devoted to functional identification of systems and networks at the molecular-or cellular scale. However, similarly important networks exist at anatomical scales such as the tendon network of human fingers: the complex array of collagen fibers that transmits and distributes muscle forces to finger joints. This network is critical to the versatility of the human hand, and its function has been debated since at least the 16(th) century. Here, we experimentally infer the structure (both topology and parameter values) of this network through sparse interrogation with force inputs. A population of models representing this structure co-evolves in simulation with a population of informative future force inputs via the predator-prey estimation-exploration algorithm. Model fitness depends on their ability to explain experimental data, while the fitness of future force inputs depends on causing maximal functional discrepancy among current models. We validate our approach by inferring two known synthetic Latex networks, and one anatomical tendon network harvested from a cadaver's middle finger. We find that functionally similar but structurally diverse models can exist within a narrow range of the training set and cross-validation errors. For the Latex networks, models with low training set error [<4%] and resembling the known network have the smallest cross-validation errors [∼5%]. The low training set [<4%] and cross validation [<7.2%] errors for models for the cadaveric specimen demonstrate what, to our knowledge, is the first experimental inference of the functional structure of complex anatomical networks. This work expands current bioinformatics inference approaches by demonstrating that sparse, yet informative interrogation of biological specimens holds significant computational advantages in accurate and efficient inference over random testing, or assuming model topology and only inferring parameters values. These findings also hold clues to both our evolutionary history and the development of versatile machines.

Report of the Fermilab ILC Citizens' Task Force

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Fermi National Accelerator Laboratory convened the ILC Citizens' Task Force to provide guidance and advice to the laboratory to ensure that community concerns and ideas are included in all public aspects of planning and design for a proposed future accelerator, the International Linear Collider. In this report, the members of the Task Force describe the process they used to gather and analyze information on all aspects of the proposed accelerator and its potential location at Fermilab in northern Illinois. They present the conclusions and recommendations they reached as a result of the learning process and their subsequent discussions and deliberations.more » While the Task Force was charged to provide guidance on the ILC, it became clear during the process that the high cost of the proposed accelerator made a near-term start for the project at Fermilab unlikely. Nevertheless, based on a year of extensive learning and dialogue, the Task Force developed a series of recommendations for Fermilab to consider as the laboratory develops all successor projects to the Tevatron. The Task Force recognizes that bringing a next-generation particle physics project to Fermilab will require both a large international effort and the support of the local community. While the Task Force developed its recommendations in response to the parameters of a future ILC, the principles they set forth apply directly to any large project that may be conceived at Fermilab, or at other laboratories, in the future. With this report, the Task Force fulfills its task of guiding Fermilab from the perspective of the local community on how to move forward with a large-scale project while building positive relationships with surrounding communities. The report summarizes the benefits, concerns and potential impacts of bringing a large-scale scientific project to northern Illinois.« less

Work and power outputs determined from pedalling and flywheel friction forces during brief maximal exertion on a cycle ergometer.

PubMed

Hibi, N; Fujinaga, H; Ishii, K

1996-01-01

Work and power outputs during short-term, maximal exertion on a friction loaded cycle ergometer are usually calculated from the friction force applied to the flywheel. The inertia of the flywheel is sometimes taken into consideration, but the effects of internal resistances and other factors have been ignored. The purpose of this study was to estimate their effects by comparing work or power output determined from the force exerted on the pedals (pedalling force) with work or power output determined from the friction force and the moment of inertia of the rotational parts. A group of 22 male college students accelerated a cycle ergometer as rapidly as possible for 3 s. The total work output determined from the pedalling force (TWp) was significantly greater than that calculated from the friction force and the moment of inertia (TWf). Power output determined from the pedalling force during each pedal stroke (SPp) was also significantly greater than that calculated from the friction force and the moment of inertia. Percentage difference (% diff), defined by % diff = ¿(TWp - TWf)/TWf¿ x 100, ranged from 16.8% to 49.3% with a mean value of 30.8 (SD 9.1)%. It was observed that % diff values were higher in subjects with greater TWp or greater maximal SPp. These results would indicate that internal resistances and other factors, such as the deformation of the chain and the vibrations of the entire system, may have significant effects on the measurements of work and power outputs. The effects appear to depend on the magnitudes of pedalling force and pedal velocity.

Work in America: Implications for Families. Hearing before the Select Committee on Children, Youth, and Families. House of Representatives, Ninety-Ninth Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Select Committee on Children, Youth, and Families.

This hearing explored the value of work, and how changes in the economy and the composition of the work force have affected families. Witnesses (1) reported data on such topics as the kinds of jobs currently available, women's participation in the work force, unemployment, and labor force growth over the next decade; (2) argued that the economy is…

Injury risk curves for the skeletal knee-thigh-hip complex for knee-impact loading.

PubMed

Rupp, Jonathan D; Flannagan, Carol A C; Kuppa, Shashi M

2010-01-01

Injury risk curves for the skeletal knee-thigh-hip (KTH) relate peak force applied to the anterior aspect of the flexed knee, the primary source of KTH injury in frontal motor-vehicle crashes, to the probability of skeletal KTH injury. Previous KTH injury risk curves have been developed from analyses of peak knee-impact force data from studies where knees of whole cadavers were impacted. However, these risk curves either neglect the effects of occupant gender, stature, and mass on KTH fracture force, or account for them using scaling factors derived from dimensional analysis without empirical support. A large amount of experimental data on the knee-impact forces associated with KTH fracture are now available, making it possible to estimate the effects of subject characteristics on skeletal KTH injury risk by statistically analyzing empirical data. Eleven studies were identified in the biomechanical literature in which the flexed knees of whole cadavers were impacted. From these, peak knee-impact force data and the associated subject characteristics were reanalyzed using survival analysis with a lognormal distribution. Results of this analysis indicate that the relationship between peak knee-impact force and the probability of KTH fracture is a function of age, total body mass, and whether the surface that loads the knee is rigid. Comparisons between injury risk curves for the midsize adult male and small adult female crash test dummies defined in previous studies and new risk curves for these sizes of occupants developed in this study suggest that previous injury risk curves generally overestimate the likelihood of KTH fracture at a given peak knee-impact force. Future work should focus on defining the relationships between impact force at the human knee and peak axial compressive forces measured by load cells in the crash test dummy KTH complex so that these new risk curves can be used with ATDs.

"Martinizing" the Variational Implicit Solvent Method (VISM): Solvation Free Energy for Coarse-Grained Proteins.

PubMed

Ricci, Clarisse G; Li, Bo; Cheng, Li-Tien; Dzubiella, Joachim; McCammon, J Andrew

2017-07-13

Solvation is a fundamental driving force in many biological processes including biomolecular recognition and self-assembly, not to mention protein folding, dynamics, and function. The variational implicit solvent method (VISM) is a theoretical tool currently developed and optimized to estimate solvation free energies for systems of very complex topology, such as biomolecules. VISM's theoretical framework makes it unique because it couples hydrophobic, van der Waals, and electrostatic interactions as a functional of the solvation interface. By minimizing this functional, VISM produces the solvation interface as an output of the theory. In this work, we push VISM to larger scale applications by combining it with coarse-grained solute Hamiltonians adapted from the MARTINI framework, a well-established mesoscale force field for modeling large-scale biomolecule assemblies. We show how MARTINI-VISM ( M VISM) compares with atomistic VISM ( A VISM) for a small set of proteins differing in size, shape, and charge distribution. We also demonstrate M VISM's suitability to study the solvation properties of an interesting encounter complex, barnase-barstar. The promising results suggest that coarse-graining the protein with the MARTINI force field is indeed a valuable step to broaden VISM's and MARTINI's applications in the near future.

Using Entanglement to Measure Temperatures and Frequencies of Individual Normal Modes in a Strongly Coupled 2D Plasma of Be+

NASA Astrophysics Data System (ADS)

Sawyer, Brian; Britton, Joseph; Keith, Adam; Wang, C.-C. Joseph; Freericks, James; Bollinger, John

2013-10-01

Confined non-neutral plasmas of ions in the regime of strong coupling serve as a platform for studying a diverse range of phenomena including: dense astrophysical matter, quantum computation/simulation, dynamical decoupling, and precision measurements. We describe a method of simultaneously detecting and measuring the temperature of transverse plasma modes in two-dimensional crystals of cold 9Be+ confined within a Penning trap. We employ a spin-dependent optical dipole force (ODF) generated from off-resonant laser beams to directly excite plasma modes transverse to the crystal plane of ~ 100 ions. Extremely small mode excitations (~ 1 nm) may be detected through spin-motion entanglement induced by an ODF as small as 10 yN , and even the shortest-wavelength (~ 20 μm) modes are excited and detected through the spin dependence of the force. This mode-specific thermometry has facilitated characterization and mitigation of ion heating sources in this system. Future work may include sub-yN force detection, spectroscopy/thermometry of the more complex in-plane oscillations, and implementation/confirmation of sub-Doppler cooling. The authors acknowledge support from the DARPA-OLE program.

The health sciences librarian in medical education: a vital pathways project task force.

PubMed

Schwartz, Diane G; Blobaum, Paul M; Shipman, Jean P; Markwell, Linda Garr; Marshall, Joanne Gard

2009-10-01

The Medical Education Task Force of the Task Force on Vital Pathways for Hospital Librarians reviewed current and future roles of health sciences librarians in medical education at the graduate and undergraduate levels and worked with national organizations to integrate library services, education, and staff into the requirements for training medical students and residents. Standards for medical education accreditation programs were studied, and a literature search was conducted on the topic of the role of the health sciences librarian in medical education. Expectations for library and information services in current standards were documented, and a draft standard prepared. A comprehensive bibliography on the role of the health sciences librarian in medical education was completed, and an analysis of the services provided by health sciences librarians was created. An essential role and responsibility of the health sciences librarian will be to provide the health care professional with the skills needed to access, manage, and use library and information resources effectively. Validation and recognition of the health sciences librarian's contributions to medical education by accrediting agencies will be critical. The opportunity lies in health sciences librarians embracing the diverse roles that can be served in this vital activity, regardless of accrediting agency mandates.

Territorial problems relating to the structure of employment in terms of sex.

PubMed

Kotliar, A

1971-10-01

Future development plans in Russia should take into account the fact that the employment opportunities which exist in a specific geographical area will exert an influence on the sex ratios in the population of that area, and the sex ratios, in turn, will affect reproductive capacity of that population. When development schemes, in a particular region, create a demand primarily for a type of labor traditionally associated with only one sex, the demographic structure will adjust to this demand. For example, in Kameshkovo, light industry predominates and generally women fulfill the labor requirements in this type of enterprise. The labor demand for women has resulted in a disproportionate sex ratio in the community; there are 154 women/100 men. Sometimes the demographic structure will resist the pressures created by the labor demands and individuals will, instead of migrating, seek employment in fields traditionally associated with the opposite sex. In cities located in the Vladimir and Ivanovo regions textile industries, traditionally associated with a female labor force, predominant, and these textile industries employ a higher proportion of men than textile industries located in other regions. In areas where heavy industry predominates, the number of men employed exceeds the number of employed women, and wages are high enough so that only one spouse must work; women may then devote more time to family matters and this is reflected in the higher birth rates associated with these areas. In areas where light industry predominates, more women are employed and wages are lower. Generally both spouses must work and as a result birth rates are lower. Future development plans should attempt to create an equal demand for the labor of both sexes. Ideal sex ratios for the population and for the labor force were calculated. Tables depict 1) % of employed workers by sex for selected cities and industries; 2) proportion of women employed, birth rate, and natural increases by territorial units; 3) sex ratios in the labor force and the population by type of industry for 7 regions; and 4) size of city by sex ratio.

Mitigated-force carriage for high magnetic field environments

DOEpatents

Ludtka, Gerard M; Ludtka, Gail M; Wilgen, John B; Murphy, Bart L

2014-05-20

A carriage for high magnetic field environments includes a first work-piece holding means for holding a first work-piece, the first work-piece holding means being disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla. The first work-piece holding means is further disposed in operable connection with a second work-piece holding means for holding a second work-piece so that, as the first work-piece is inserted into the magnetic field, the second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

WHAT IS AN AFFORDABLE STRATEGY FOR RECAPITALIZING THE AIR FORCE OF THE FUTURE

DTIC Science & Technology

2016-01-01

so aerodynamically unsound it required computers to control it, or otherwise it would crash. Many of its pilots unofficially called it the “wobbly...seeing combat would be financially unsound . In addition the costs to maintain the LO material over the life of the aircraft further increases these...AIR WAR COLLEGE AIR UNIVERSITY WHAT IS AN AFFORDABLE STRATEGY FOR RECAPITALIZING THE AIR FORCE OF THE FUTURE? Thesis: Significant savings

Sharpening the Tip of the Spear: Preparing Special Forces Detachment Commanders for the Future

DTIC Science & Technology

2008-05-19

Persian Farsi, Korean, and Thai ) is 24 weeks long. Soldiers must successfully pass the Defense Language Proficiency Test (DLPT) by demonstrating...Brief (Fort Bragg, NC: 2007), 2. 29 real world GWOT project in coordination with one of the Theatre Special Operation Commands (TSOC).89 Weeks 13...Forces (JSOTF) with parallel major general Division commanders within theatre ? A second suggestion for future research begins with the question

Recent and Future Enhancements in NDI for Aircraft Structures (Postprint)

DTIC Science & Technology

2015-11-01

driven life management to a damage tolerance approach similar to the current USAF method to ensure the integrity of metallic structure . Much of this...Service Inspection Flaw Assumptions for Metallic Structures , Air Force Structures Bulletin, 23 May 2013. [9] Forsyth, D.S., et.al., “The Air Force...AFRL-RX-WP-JA-2016-0028 RECENT AND FUTURE ENHANCEMENTS IN NDI FOR AIRCRAFT STRUCTURES (POSTPRINT) Eric A. Lindgren, John Brausch, and

Challenges of Enterprise Wide AM for Air Force Sustainment

DTIC Science & Technology

2016-12-01

December 2016 Naguy is chief of the Air Force Life Cycle Management Center’s Product Support Engineering Division at Wright Patterson Air Force Base in...today and into the future. To truly capitalize on the full potential of AM, the Air Force Life Cycle Management Center (AFLCMC) in close collabora...approach for material standards and quality include un- derstanding powder characteristics, developing an enterprise material characterization

External Forces Affecting Higher Education. NACUBO Professional File. Vol. 7, No. 5.

ERIC Educational Resources Information Center

Bailey, Stephen K.

Out of the many external forces that influence college campuses, there are four that have had (or are likely to have) a major impact on the fortunes of higher education. The ways in which college and university officials and friends react to these forces can make an enormous difference to the future of higher education. The forces are: (1) Federal…

The Total Library *

PubMed Central

Annan, Gertrude L.

1968-01-01

Changing functions and techniques of today's libraries have led to questioning the very substance of the library of the future. Ralph Shaw points out that the total library must be “a living force for the enrichment of mankind.” The Medical Research Library of Brooklyn at its very inauguration is uniquely prepared and equipped to work toward that goal. It imaginatively serves the needs of the immediate area by generous sharing of resources, use of its computerized program, and participation in a state-wide system. The large collection of the Academy of Medicine of Brooklyn offers thousands of volumes for the historian, both great works as highlights of medical achievements and more modest contributions of both early and recent date. The total library must serve as an intellectual resource, as well as a mechanism for the rapid transfer of current information. PMID:5644795

Tax reform, population ageing and the changing labour supply behaviour of married women.

PubMed

Apps, P

1991-01-01

"The burden of financing retirement incomes in an ageing population is predicted to rise sharply in future decades. This paper investigates the effects of reforms to the Australian tax-benefit system involving a greater reliance on proportional taxation for raising revenue and a more targeted welfare system for cutting government expenditure, in order to reduce expected budget deficits. Estimates of changes in net incomes and hours of work suggest that reforms of this kind shift the tax burden to lower and middle income households with a second earner and that they can have counter-productive labour supply effects. The study explores the impact of projected increases in female work force participation and illustrates the importance of shifts in the labour supply of married women in predicting the fiscal effects of demographic change." excerpt

Precipitation Organization in a Warmer Climate

NASA Astrophysics Data System (ADS)

Rickenbach, T. M.; Nieto Ferreira, R.; Nissenbaum, M.

2014-12-01

This study will investigate changes in precipitation organization in a warmer climate using the Weather Research and Forecasting (WRF) model and CMIP-5 ensemble climate simulations. This work builds from an existing four-year NEXRAD radar-based precipitation climatology over the southeastern U.S. that uses a simple two-category framework of precipitation organization based on instantaneous precipitating feature size. The first category - mesoscale precipitation features (MPF) - dominates winter precipitation and is linked to the more predictable large-scale forcing provided by the extratropical cyclones. In contrast, the second category - isolated precipitation - dominates the summer season precipitation in the southern coastal and inland regions but is linked to less predictable mesoscale circulations and to local thermodynamics more crudely represented in climate models. Most climate modeling studies suggest that an accelerated water cycle in a warmer world will lead to an overall increase in precipitation, but few studies have addressed how precipitation organization may change regionally. To address this, WRF will simulate representative wintertime and summertime precipitation events in the Southeast US under the current and future climate. These events will be simulated in an environment resembling the future climate of the 2090s using the pseudo-global warming (PGW) approach based on an ensemble of temperature projections. The working hypothesis is that the higher water vapor content in the future simulation will result in an increase in the number of isolated convective systems, while MPFs will be more intense and longer-lasting. In the context of the seasonal climatology of MPF and isolated precipitation, these results have implications for assessing the predictability of future regional precipitation in the southeastern U.S.

Canadian pediatric gastroenterology workforce: Current status, concerns and future projections

PubMed Central

Morinville, Véronique; Drouin, Éric; Lévesque, Dominique; Espinosa, Victor M; Jacobson, Kevan

2007-01-01

BACKGROUND: There is concern that the Canadian pediatric gastroenterology workforce is inadequate to meet health care demands of the pediatric population. The Canadian Association of Gastroenterology Pediatric Committee performed a survey to determine characteristics and future plans of the Canadian pediatric gastroenterology workforce and trainees. METHODS: Estimates of total and pediatric populations were obtained from the 2001 Census of Population, Statistics Canada (with estimates to July 1, 2005). Data on Canadian pediatric gastroenterologists, including clinical full-time equivalents, sex, work interests, opinions on workforce adequacy, retirement plans, fellowship training programs and future employment plans of fellows, were gathered through e-mail surveys and telephone correspondence in 2005 and 2006. RESULTS: Canada had an estimated population of 32,270,507 in 2005 (6,967,853 people aged zero to 17 years). The pediatric gastroenterology workforce was estimated at 9.2 specialists per million children. Women accounted for 50% of the workforce. Physician to pediatric population ratios varied, with Alberta demonstrating the highest and Saskatchewan the lowest ratios (1:69,404 versus 1:240,950, respectively). Between 1998 and 2005, Canadian pediatric gastroenterology fellowship programs trained 65 fellows (65% international trainees). Twenty-two fellows (34%) entered the Canadian workforce. CONCLUSIONS: The survey highlights the variable and overall low numbers of pediatric gastroenterologists across Canada, an increasingly female workforce, a greater percentage of part-time physicians and a small cohort of Canadian trainees. In conjunction with high projected retirement rates, greater demands on the work-force and desires to partake in nonclinical activities, there is concern for an increasing shortage of pediatric gastroenterologists in Canada in future years. PMID:17948136

Elementary Particle Physics and High Energy Phenomena: Final Report for FY2010-13

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cumalat, John P.; de Alwis, Senarath P.; DeGrand, Thomas A.

2013-06-27

The work under this grant consists of experimental, theoretical, and phenomenological research on the fundamental properties of high energy subnuclear particles. The work is conducted at the University of Colorado, the European Organization for Nuclear Research (CERN), the Japan Proton Accelerator Research Complex (J-PARC), Fermi National Accelerator Laboratory (FNAL), SLAC National Accelerator Laboratory (SLAC), Los Alamos National Laboratory (LANL), and other facilities, employing neutrino-beam experiments, test beams of various particles, and proton-proton collider experiments. It emphasizes mass generation and symmetry-breaking, neutrino oscillations, bottom particle production and decay, detector development, supergravity, supersymmetry, superstrings, quantum chromodynamics, nonequilibrium statistical mechanics, cosmology, phase transitions,more » lattice gauge theory, and anomaly-free theories. The goals are to improve our understanding of the basic building blocks of matter and their interactions. Data from the Large Hadron Collider at CERN have revealed new interactions responsible for particle mass, and perhaps will lead to a more unified picture of the forces among elementary material constituents. To this end our research includes searches for manifestations of theories such as supersymmetry and new gauge bosons, as well as the production and decay of heavy-flavored quarks. Our current work at J-PARC, and future work at new facilities currently under conceptual design, investigate the specifics of how the neutrinos change flavor. The research is integrated with the training of students at all university levels, benefiting both the manpower and intellectual base for future technologies.« less

Labor Force

ERIC Educational Resources Information Center

Occupational Outlook Quarterly, 2012

2012-01-01

The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

Flextime: A Modified Work Force Scheduling Technique for Selected Headquarters Air Force Logistics Command Organizations.

ERIC Educational Resources Information Center

Kimzey, Reed T.; Prince, Samuel M. O.

The thesis discusses the advantages and disadvantages of one work force scheduling technique--flextime. The authors were interested in determining if a flextime schedule could be put into effect in a governmental organization such as Headquarters Air Force Logistics Command (AFLC). The study objectives were to determine the feasibility,…

Return to contingency: developing a coherent strategy for future R2E/R3 land medical capabilities.

PubMed

Ingram, Mike; Mahan, J

2015-03-01

Key to deploying forces in the future will be the provision of a rapidly deployable Deployed Hospital Capability. Developing this capability has been the focus of 34 Field Hospital and 2nd Medical Brigade over the last 18 months and this paper describes a personal account of this development work to date. Future contingent Deployed Hospital Capability must meet the requirements of Defence; that is to be rapidly deployable delivering a hospital standard of care. The excellence seen in clinical delivery on recent operations is intensive; in personnel, equipment, infrastructure and sustainment. The challenge in developing a coherent capability has been in balancing the clinical capability and capacity against strategic load in light of recent advances in battlefield medicine. This paper explores the issues encountered and solutions found to date in reconstituting a Very High Readiness Deployed Hospital Capability. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

The Total Force: Cultural Considerations for the Future of the Total Force Integration

DTIC Science & Technology

2017-03-31

force. In order to achieve a new TFI culture the Air Force must make a plan, and provide the education , tools, and road map; to cultivate a new set of...Force leadership; and taught holistically at all levels, ranks; and in every professional military education institution. 3 Part I...complex than transferring assets and improving individual units. Cohen’s principles spoke to a need for a cultural transformation . Today’s TFI concept

Protocol and the post-human performativity of security techniques.

PubMed

O'Grady, Nathaniel

2016-07-01

This article explores the deployment of exercises by the United Kingdom Fire and Rescue Service. Exercises stage, simulate and act out potential future emergencies and in so doing help the Fire and Rescue Service prepare for future emergencies. Specifically, exercises operate to assess and develop protocol; sets of guidelines which plan out the actions undertaken by the Fire and Rescue Service in responding to a fire. In the article I outline and assess the forms of knowledge and technologies, what I call the 'aesthetic forces', by which the exercise makes present and imagines future emergencies. By critically engaging with Karen Barad's notion of post-human performativity, I argue that exercises provide a site where such forces can entangle with one another; creating a bricolage through which future emergencies are evoked sensually and representatively, ultimately making it possible to experience emergencies in the present. This understanding of exercises allows also for critical appraisal of protocol both as phenomena that are produced through the enmeshing of different aesthetic forces and as devices which premise the operation of the security apparatus on contingency.

Multilevel dynamic systems affecting introduction of HIV/STI prevention innovations among Chinese women in sex work establishments.

PubMed

Weeks, Margaret R; Li, Jianghong; Liao, Susu; Zhang, Qingning; Dunn, Jennifer; Wang, Yanhong; Jiang, Jingmei

2013-10-01

Social and public health scientists are increasingly interested in applying system dynamics theory to improve understanding and to harness the forces of change within complex, multilevel systems that affect community intervention implementation, effects, and sustainability. Building a system dynamics model based on ethnographic case study has the advantage of using empirically documented contextual factors and processes of change in a real-world and real-time setting that can then be tested in the same and other settings. System dynamics modeling offers great promise for addressing persistent problems like HIV and other sexually transmitted epidemics, particularly in complex rapidly developing countries such as China. We generated a system dynamics model of a multilevel intervention we conducted to promote female condoms for HIV/sexually transmitted infection (STI) prevention among Chinese women in sex work establishments. The model reflects factors and forces affecting the study's intervention, implementation, and effects. To build this conceptual model, we drew on our experiences and findings from this intensive, longitudinal mixed-ethnographic and quantitative four-town comparative case study (2007-2012) of the sex work establishments, the intervention conducted in them, and factors likely to explain variation in process and outcomes in the four towns. Multiple feedback loops in the sex work establishments, women's social networks, and the health organization responsible for implementing HIV/STI interventions in each town and at the town level directly or indirectly influenced the female condom intervention. We present the conceptual system dynamics model and discuss how further testing in this and other settings can inform future community interventions to reduce HIV and STIs.

Multilevel Dynamic Systems Affecting Introduction of HIV/STI Prevention Innovations among Chinese Women in Sex-work Establishments

PubMed Central

Weeks, Margaret R.; Li, Jianghong; Liao, Susu; Zhang, Qingning; Dunn, Jennifer; Wang, Yanhong; Jiang, Jingmei

2015-01-01

Social and public health scientists are increasingly interested in applying system dynamics theory to improve understanding and to harness the forces of change within complex, multilevel systems that affect community intervention implementation, effects, and sustainability. Building a system dynamics model based on ethnographic case study has the advantage of using empirically documented contextual factors and processes of change in a real world and real time setting that can then be tested in the same and other settings. System dynamics modeling offers great promise for addressing persistent problems like HIV and other sexually transmitted epidemics, particularly in complex rapidly developing countries like China. We generated a system dynamics model of a multilevel intervention we conducted to promote female condoms (FC) for HIV/STI prevention among Chinese women in sex-work establishments. The model reflects factors and forces affecting the study’s intervention implementation and effects. To build this conceptual model, we drew on our experiences and findings from this intensive, longitudinal mixed ethnographic and quantitative four-town comparative case study (2007–2012) of the sex-work establishments, the intervention conducted in them, and factors likely to explain variation in process and outcomes in the four towns. Multiple feedback loops in the sex-work establishments, women’s social networks, and the health organization responsible for implementing HIV/STI interventions in each town and at the town level directly or indirectly influenced the FC intervention. We present the conceptual system dynamics model and discuss how further testing in this and other settings can inform future community interventions to reduce HIV and STIs. PMID:24084394

(Extreme) Core-collapse Supernova Simulations

NASA Astrophysics Data System (ADS)

Mösta, Philipp

2017-01-01

In this talk I will present recent progress on modeling core-collapse supernovae with massively parallel simulations on the largest supercomputers available. I will discuss the unique challenges in both input physics and computational modeling that come with a problem involving all four fundamental forces and relativistic effects and will highlight recent breakthroughs overcoming these challenges in full 3D simulations. I will pay particular attention to how these simulations can be used to reveal the engines driving some of the most extreme explosions and conclude by discussing what remains to be done in simulation work to maximize what we can learn from current and future time-domain astronomy transient surveys.

[Day care and female employment in Mexico: descriptive evidence and policy considerations].

PubMed

Knaul, F; Parker, S

1996-01-01

"This paper analyzes the supply and organization of public day care in Mexico and presents a series of considerations as to the formulation of future policy. The research concentrates on the evolution of public policies to provide day care to working women in the formal sector through the Mexican Social Security Institute (IMSS). Data on the evolution of female labor force participation, changes in family structure, the supply of day care and patterns of child care arrangements, suggest that access to formal facilities falls short of demand.... Innovative policies for the reorganization and expansion of the provision of day care are presently under consideration." (EXCERPT)

DESIGN AND CONSTRUCTION OF A FORCE-REFLECTING TELEOPERATION SYSTEM

DOE Office of Scientific and Technical Information (OSTI.GOV)

M.A. Ebadian, Ph.D.

1999-01-01

For certain applications, such as space servicing, undersea operations, and hazardous material handling tasks in nuclear reactors, the environments can be uncertain, complex, and hazardous. Lives may be in danger if humans were to work under these conditions. As a result, a man-machine system--a teleoperator system--has been developed to work in these types of environments. In a typical teleoperator system, the actual system operates at a remote site; the operator located away from this system usually receives visual information from a video image and/or graphical animation on the computer screen. Additional feedback, such as aural and force information, can significantlymore » enhance performance of the system. Force reflection is a type of feedback in which forces experienced by the remote manipulator are fed back to the manual controller. Various control methods have been proposed for implementation on a teleoperator system. In order to examine different control schemes, a one Degree-Of-Freedom (DOF) Force-Reflecting Manual Controller (FRMC) is constructed and integrated into a PC. The system parameters are identified and constructed as a mathematical model. The Proportional-Integral-Derivative (PID) and fuzzy logic controllers are developed and tested experimentally. Numerical simulation results obtained from the mathematical model are compared with those of experimental data for both types of controllers. In addition, the concept of a telesensation system is introduced. A telesensation system is an advanced teleoperator system that attempts to provide the operator with sensory feedback. In this context, a telesensation system integrates the use of a Virtual Reality (VR) unit, FRMC, and Graphical User Interface (GUI). The VR unit is used to provide the operator with a 3-D visual effect. Various commercial VR units are reviewed and features compared for use in a telesensation system. As for the FRMC, the conceptual design of a 3-DOF FRMC is developed in an effort to make the system portable, compact, and lightweight. A variety of design alternatives are presented and evaluated. Finally, a GUI software package is developed to interface with several teleoperation unit components. These components include an industrial robot, electric motor, encoder, force/torque sensor, and CCD camera. The software includes features such as position scaling, force scaling, and rereferencing and is intended to provide a sound basis for the development of a multi-DOF FRMC system in the future.« less

Surface forcing of non-stand-replacing fires in Siberian larch forests

NASA Astrophysics Data System (ADS)

Chen, Dong; Loboda, Tatiana V.

2018-04-01

Wildfires are the dominant disturbance agent in the Siberian larch forests. Extensive low- to mediate-intensity non-stand-replacing fires are a notable property of fire regime in these forests. Recent large scale studies of these fires have focused mostly on their impacts on carbon budget; however, their potential impacts on energy budget through post-fire albedo changes have not been considered. This study quantifies the post-fire surface forcing for Siberian larch forests that experienced non-stand-replacing fires between 2001 and 2012 using the full record of MODIS MCD43A3 albedo product and a burned area product developed specifically for the Russian forests. Despite a large variability, the mean effect of non-stand-replacing fires imposed through albedo is a negative forcing which lasts for at least 14 years. However, the magnitude of the forcing is much smaller than that imposed by stand-replacing fires, highlighting the importance of differentiating between the two fire types in the studies involving the fire impacts in the region. The results of this study also show that MODIS-based summer differenced normalized burn ratio (dNBR) provides a reliable metric for differentiating non-stand-replacing from stand-replacing fires with an overall accuracy of 88%, which is of considerable importance for future work on modeling post-fire energy budget and carbon budget in the region.

What drives innovation in renewable energy technology? Evidence based on patent counts

NASA Astrophysics Data System (ADS)

McCormick, Jesse

America's future economic growth and international competitiveness depend on our capacity to innovate, particularly in emerging global markets. This paper analyzes the forces that drive innovation in one such market, renewable energy technologies, utilizing the theory of induced technological innovation. Specifically, this paper operationalizes the determinants of innovation to consist of: 1) private market forces, 2) public policy that influences price and market size, and 3) public policy that catalyzes R&D investment. Analysis is conducted using a negative binomial regression to determine which of the three foundational determinants has the greatest impact on renewable energy innovation. In so doing this paper builds off of work conducted by Johnstone et al. (2010). Innovation is measured using European Patent Office data on a panel of 24 countries spanning the period from 1978-2005. The implications of this study are straightforward; policies, not market forces, are responsible for driving innovation in renewable energy technologies. Market-oriented policies are effective for mature technologies, particularly hydro, and to a lesser extent wind and solar power. R&D-oriented policy is effective for a broader technology set. In short, the United States needs a comprehensive policy environment to support renewable energy innovation; market forces alone will not provide the pace and breadth of innovations needed. That environment can and should be strategically targeted, however, to effectively allocate scare resources.

Wind Forced Variability in Eddy Formation, Eddy Shedding, and the Separation of the East Australian Current

NASA Astrophysics Data System (ADS)

Bull, Christopher Y. S.; Kiss, Andrew E.; Jourdain, Nicolas C.; England, Matthew H.; van Sebille, Erik

2017-12-01

The East Australian Current (EAC), like many other subtropical western boundary currents, is believed to be penetrating further poleward in recent decades. Previous observational and model studies have used steady state dynamics to relate changes in the westerly winds to changes in the separation behavior of the EAC. As yet, little work has been undertaken on the impact of forcing variability on the EAC and Tasman Sea circulation. Here using an eddy-permitting regional ocean model, we present a suite of simulations forced by the same time-mean fields, but with different atmospheric and remote ocean variability. These eddy-permitting results demonstrate the nonlinear response of the EAC to variable, nonstationary inhomogeneous forcing. These simulations show an EAC with high intrinsic variability and stochastic eddy shedding. We show that wind stress variability on time scales shorter than 56 days leads to increases in eddy shedding rates and southward eddy propagation, producing an increased transport and southward reach of the mean EAC extension. We adopt an energetics framework that shows the EAC extension changes to be coincident with an increase in offshore, upstream eddy variance (via increased barotropic instability) and increase in subsurface mean kinetic energy along the length of the EAC. The response of EAC separation to regional variable wind stress has important implications for both past and future climate change studies.

Air pollution control and decreasing new particle formation lead to strong climate warming

NASA Astrophysics Data System (ADS)

Makkonen, R.; Asmi, A.; Kerminen, V.-M.; Boy, M.; Arneth, A.; Hari, P.; Kulmala, M.

2011-09-01

The number of cloud droplets determines several climatically relevant cloud properties. A major cause for the high uncertainty in the indirect aerosol forcing is the availability of cloud condensation nuclei (CCN), which in turn is highly sensitive to atmospheric new particle formation. Here we present the effect of new particle formation on anthropogenic aerosol forcing in present-day (year 2000) and future (year 2100) conditions. The total aerosol forcing (-1.61 W m-2 in year 2000) is simulated to be greatly reduced in the future, to -0.23 W m-2, mainly due to decrease in SO2 emissions and resulting decrease in new particle formation. With the total aerosol forcing decreasing in response to air pollution control measures taking effect, warming from increased greenhouse gas concentrations can potentially increase at a very rapid rate.

Novel applications of the temporal kernel method: Historical and future radiative forcing

NASA Astrophysics Data System (ADS)

Portmann, R. W.; Larson, E.; Solomon, S.; Murphy, D. M.

2017-12-01

We present a new estimate of the historical radiative forcing derived from the observed global mean surface temperature and a model derived kernel function. Current estimates of historical radiative forcing are usually derived from climate models. Despite large variability in these models, the multi-model mean tends to do a reasonable job of representing the Earth system and climate. One method of diagnosing the transient radiative forcing in these models requires model output of top of the atmosphere radiative imbalance and global mean temperature anomaly. It is difficult to apply this method to historical observations due to the lack of TOA radiative measurements before CERES. We apply the temporal kernel method (TKM) of calculating radiative forcing to the historical global mean temperature anomaly. This novel approach is compared against the current regression based methods using model outputs and shown to produce consistent forcing estimates giving confidence in the forcing derived from the historical temperature record. The derived TKM radiative forcing provides an estimate of the forcing time series that the average climate model needs to produce the observed temperature record. This forcing time series is found to be in good overall agreement with previous estimates but includes significant differences that will be discussed. The historical anthropogenic aerosol forcing is estimated as a residual from the TKM and found to be consistent with earlier moderate forcing estimates. In addition, this method is applied to future temperature projections to estimate the radiative forcing required to achieve those temperature goals, such as those set in the Paris agreement.

2001: Things to come.

PubMed

Apuzzo, M L; Liu, C Y

2001-10-01

THIS ARTICLE DISCUSSES elements in the definition of modernity and emerging futurism in neurological surgery. In particular, it describes evolution, discovery, and paradigm shifts in the field and forces responsible for their realization. It analyzes the cyclical reinvention of the discipline experienced during the past generation and attempts to identify apertures to the near and more remote future. Subsequently, it focuses on forces and discovery in computational science, imaging, molecular science, biomedical engineering, and information processing as they relate to the theme of minimalism that is evident in the field. These areas are explained in the light of future possibilities offered by the emerging field of nanotechnology with molecular engineering.

Is the bronchodilator test an useful tool to measure asthma control?

PubMed

Ferrer Galván, Marta; Javier Alvarez Gutiérrez, Francisco; Romero Falcón, Auxiliadora; Romero Romero, Beatriz; Sáez, Antonia; Medina Gallardo, Juan Francisco

2017-05-01

Asthma control includes the control of symptoms and future risk. We sought to evaluate the usefulness of the degree of spirometric reversibility of the forced expiratory volume in one second (FEV 1 ) as the target parameter of control. Patients with bronchial asthma were followed up for one year. The clinical, functional, inflammatory and control parameters of the asthma were collected. The area under the curve (AUC) was estimated to establish the cutoff point of the post-bronchodilator FEV 1 reversibility in relation to non-control asthma. In the univariate analysis, the differences between groups were studied based on the degree of estimated reversibility. Factors with a significance <0.1 were included in the multivariate analysis by binary logistic regression. A total of 407 patients with a mean age of 38.1 ± 16.7 years were included. When the patients were grouped into controlled and non-controlled groups, compared with post-bronchodilator FEV 1 reversibility, the cutoff point obtained for the non-controlled group was ≥10% (sensitivity: 65.8%, specificity: 48.4%, positive predictive value: 69.5%, and AUC: 0.619 [0.533-0.700], p < 0.01). In the year-long follow-up of this group (post-bronchodilator FEV 1 ≥10), an increased use of relief medication was observed, along with a significantly progressive drop in post-bronchodilator FEV 1 and post-bronchodilator FEV 1 /FVC (forced expiratory volume in one second/forced vital capacity). Spirometric reversibility can be useful in assessing control in asthmatic patients and can predict future risk parameters. The cutoff point related to the non-control of asthma found in our work was ≥10%. Copyright © 2017 Elsevier Ltd. All rights reserved.

Women of Hispanic Origin in the Labor Force. Facts on Working Women No. 89-1 = La mujer de origen hispano en la fuerza laboral. Facts on Working Women Num. 89-1S.

ERIC Educational Resources Information Center

Women's Bureau (DOL), Washington, DC.

Data on Hispanic women in the labor force between 1978 and 1988 show the following: (1) 6.5 percent of the women in the work force in 1988 were of Hispanic origin (3.6 million); (2) the median age of Hispanic women was 26.1 years, 2-5 years younger than Black or White women; (3) 66 percent of Hispanic women participate in the labor force, a higher…

Army Special Operations Forces Professional Military Education for the Future

DTIC Science & Technology

2010-06-01

generations have done. Jean Piaget (1896–1980) Swiss cognitive psychologist CG: Hey DCO, you’re never going to believe this; come in here and shut...have a “think tank” branch responsible for developing Special Operations theory and pushing it out to the entire SOCOM community, as well as the...COVERED Master’s Thesis 4. TITLE AND SUBTITLE Army Special Operations Forces Professional Military Education for the Future 6. AUTHOR( S ) Bradford M

DOD (USAF) turbulence accidents and incidents

NASA Technical Reports Server (NTRS)

Miller, Douglas

1987-01-01

A summary of Air Force turbulence related mishaps for the last ten years of Air Force mishaps is presented from a perspective of where it has been, where it is now, and where it is going. In addition to accounts of major mishaps, a summary of what actions were taken to preclude future similar mishaps is presented. Also, a discussion of some of the things being done now and being planned for the future to prevent turbulence related mishaps is presented.

Navigating the Repeal of Don’t Ask, Don’t Tell

DTIC Science & Technology

2011-03-24

different categories, except for non-heterosexuals. They serve in the U.S. Armed Forces now and they will continue to serve in the future. Legal ...categories, except for non-heterosexuals. They serve in the U.S. Armed Forces now and they will continue to serve in the future. Legal integration... homosexuals . This shortlist can be boiled down to sex, race, religion, ethnicity, age and sexual orientation. Over the years, the U.S. military

New developments in aluminum for aircraft and automobiles

NASA Technical Reports Server (NTRS)

Petit, Jocelyn I.

1994-01-01

A common bond for the aircraft and automobile industry is the need for cost-efficient, lightweight structures such as provided by aluminum based materials. The topics are presented in viewgraph form and cover the following: new developments in aluminum for aircraft and automobiles; forces shaping future automotive materials needs; aluminum strength/weakness versus competitive materials; evolution of aluminum aerospace alloys; forces shaping future aircraft materials needs; fiber/metal structural laminates; and property requirements for jetliner and military transport applications.

Defense Science Board Task Force on The Manufacturing Technology Program: A Key to Affordably Equipping the Future Force

DTIC Science & Technology

2006-02-01

technology for cost and risk reduction of products, software, and processes; long-term, multi-Service needs; and disruptive technologies , both...initiatives and for disruptive technologies , the Office of the Secretary of Defense (OSD) can better promote the importance and value of the program...multi- Service programs, research in “ disruptive ” technologies , and SBIR programs. Balance current, near term, and future needs as well as small and

Air Force Leadership Study: The Need for Deliberate Development

DTIC Science & Technology

2012-02-01

Skills, 1. For future military operating environment studies, see Stephen J . Zaccaro, Richard J . Klimoski, and Lisa A. Boyce, The Changing U.S...fresh-voice -2176107.html. 13. Stephen J . Hagel et al., The Future of Global US Air Force Basing 2010– 2040, unpublished manuscript (Maxwell AFB, AL...it included the senior commanders of Amer- ica’s primary allies. Marshall’s simple calculus was Conner’s and, now, Eisenhower’s: If the United States

Activation Energy

NASA Technical Reports Server (NTRS)

Gadeken, Owen

2002-01-01

Teaming is so common in today's project management environment that most of us assume it comes naturally. We further assume that when presented with meaningful and challenging work, project teams will naturally engage in productive activity to complete their tasks. This assumption is expressed in the simple (but false) equation: Team + Work = Teamwork. Although this equation appears simple and straightforward, it is far from true for most project organizations whose reality is a complex web of institutional norms based on individual achievement and rewards. This is illustrated by the very first successful team experience from my early Air Force career. As a young lieutenant, I was sent to Squadron Officer School, which was the first in the series of Air Force professional military education courses I was required to complete during my career. We were immediately formed into teams of twelve officers. Much of the course featured competition between these teams. As the most junior member of my team, I quickly observed the tremendous pressure to show individual leadership capability. At one point early in the course, almost everyone in our group was vying to become the team leader. This conflict was so intense that it caused us to fail miserably in our first outdoor team building exercise. We spent so much time fighting over leadership that we were unable to complete any of the events on the outdoor obstacle course. This complete lack of success was so disheartening to me that I gave our team little hope for future success. What followed was a very intense period of bickering, conflict, and even shouting matches as our dysfunctional team tried to cope with our early failures and find some way to succeed. British physician and researcher Wilfred Bion (Experiences in Groups, 1961) discovered that there are powerful psychological forces inherent in all groups that divert from accomplishing their primary tasks. To overcome these restraining forces and use the potential power of the team, greater emphasis must be placed on establishing and maintaining group cohesiveness. This relationship is expressed in the revised (true) mathematical equation: Team + Work (on the Team) = Teamwork.

Ergonomics/Human factors needs of an ageing workforce in the manufacturing sector.

PubMed

W Stedmon, Alex; Howells, Hannah; R Wilson, John; Dianat, Iman

2012-01-01

As the effects of demographic transition are realised around the world, many in-dustrial societies are facing the effects of a baby boom generation, increased life expectancies, decreased birth rates and recent changes to retirement legislation with the result that older work¬ers are set to comprise a greater proportion of the labour force. This paper reviews the evidence for the physical and cognitive factors that characterise an ageing workforce in manufacturing. From an ergonomics and human factors (E/HF) pers¬pective, characteristics of manufacturing tasks and the effects of ageing provide an insight into how the industry will have to adapt to support the user needs of the older worker in the future. The approach taken is drawn from Ilmarinen's framework of age, experience, and work performance, from which specific E/HF issues are explored. There would appear to potential to support physical decline in older workers within manufacturing jobs through increased mechanisation and automation; however, those factors associated with cognitive human factors are less clear. Increased mechanisation and automation can place greater loads and demands on the older worker where cognitive decline is more subtle and varied between workers. Using historical and contemporary findings and the relationship between age, experience, and work performance is redrawn to include both cognitive skills and physical attributes to provide recommendations for future job design and worker needs.

Ergonomics/Human Factors Needs of an Ageing Workforce in the Manufacturing Sector

PubMed Central

W. Stedmon, Alex; Howells, Hannah; R. Wilson, John; Dianat, Iman

2012-01-01

Background: As the effects of demographic transition are realised around the world, many in-dustrial societies are facing the effects of a baby boom generation, increased life expectancies, decreased birth rates and recent changes to retirement legislation with the result that older work¬ers are set to comprise a greater proportion of the labour force. Methods: This paper reviews the evidence for the physical and cognitive factors that characterise an ageing workforce in manufacturing. From an ergonomics and human factors (E/HF) pers¬pective, characteristics of manufacturing tasks and the effects of ageing provide an insight into how the industry will have to adapt to support the user needs of the older worker in the future. The approach taken is drawn from Ilmarinen’s framework of age, experience, and work performance, from which specific E/HF issues are explored. Results: There would appear to potential to support physical decline in older workers within manufacturing jobs through increased mechanisation and automation; however, those factors associated with cognitive human factors are less clear. Increased mechanisation and automation can place greater loads and demands on the older worker where cognitive decline is more subtle and varied between workers. Conclusion: Using historical and contemporary findings and the relationship between age, experience, and work performance is redrawn to include both cognitive skills and physical attributes to provide recommendations for future job design and worker needs. PMID:24688925

The Prediction of the Work of Friction Force on the Arbitrary Path

ERIC Educational Resources Information Center

Matehkolaee, Mehdi Jafari; Majidian, Kourosh

2013-01-01

In this paper we have calculated the work of friction force on the arbitrary path. In our method didn't use from energy conservative conceptions any way. The distinction of this procedure is that at least do decrease measurement on the path once. Thus we can forecast the amount of work of friction force without information about speed of…

Three-dimensional computer model for the atmospheric general circulation experiment

NASA Technical Reports Server (NTRS)

Roberts, G. O.

1984-01-01

An efficient, flexible, three-dimensional, hydrodynamic, computer code has been developed for a spherical cap geometry. The code will be used to simulate NASA's Atmospheric General Circulation Experiment (AGCE). The AGCE is a spherical, baroclinic experiment which will model the large-scale dynamics of our atmosphere; it has been proposed to NASA for future Spacelab flights. In the AGCE a radial dielectric body force will simulate gravity, with hot fluid tending to move outwards. In order that this force be dominant, the AGCE must be operated in a low gravity environment such as Spacelab. The full potential of the AGCE will only be realized by working in conjunction with an accurate computer model. Proposed experimental parameter settings will be checked first using model runs. Then actual experimental results will be compared with the model predictions. This interaction between experiment and theory will be very valuable in determining the nature of the AGCE flows and hence their relationship to analytical theories and actual atmospheric dynamics.

Molecular Dynamics Simulations of Intrinsically Disordered Proteins: On the Accuracy of the TIP4P-D Water Model and the Representativeness of Protein Disorder Models.

PubMed

Henriques, João; Skepö, Marie

2016-07-12

Here, we first present a follow-up to a previous work by our group on the problematic of molecular dynamics simulations of intrinsically disordered proteins (IDPs) [ Henriques et al. J. Chem. Theory Comput. 2015 , 11 , 3420 - 3431 ], using the recently developed TIP4P-D water model. When used in conjunction with the standard AMBER ff99SB-ILDN force field and applied to the simulation of Histatin 5, our IDP model, we obtain results which are in excellent agreement with the best performing IDP-suitable force field from the earlier study and with experiment. We then assess the representativeness of the IDP models used in these and similar studies, finding that most are too short in comparison to the average IDP and contain a bias toward hydrophilic amino acid residues. Moreover, several key order- and disorder-promoting residues are also found to be misrepresented. It seems appropriate for future studies to address these issues.

First-order aerodynamic and aeroelastic behavior of a single-blade installation setup

NASA Astrophysics Data System (ADS)

Gaunaa, M.; Bergami, L.; Guntur, S.; Zahle, F.

2014-06-01

Limitations on the wind speed at which blade installation can be performed bears important financial consequences. The installation cost of a wind farm could be significantly reduced by increasing the wind speed at which blade mounting operations can be carried out. This work characterizes the first-order aerodynamic and aeroelastic behavior of a single blade installation system, where the blade is grabbed by a yoke, which is lifted by the crane and stabilized by two taglines. A simple engineering model is formulated to describe the aerodynamic forcing on the blade subject to turbulent wind of arbitrary direction. The model is coupled with a schematic aeroelastic representation of the taglines system, which returns the minimum line tension required to compensate for the aerodynamic forcing. The simplified models are in excellent agreement with the aeroelastic code HAWC2, and provide a solid basis for future design of an upgraded single blade installation system able to operate at higher wind speeds.

Dilemmas and controversies within civilian and military organizations in the execution of humanitarian aid in Iraq: a review.

PubMed

Morton, Melinda J; Burnham, Gilbert M

2010-01-01

Civilian humanitarian assistance organizations and military forces are working in a similar direction in many humanitarian operations around the world. However, tensions exist over the role of the military in such operations. The purpose of this article is to review cultural perspectives of civilian and military actors and to discuss recent developments in civil-military humanitarian collaboration in the provision of health services in Iraq for guiding such collaborative efforts in postconflict and other settings in future. Optimal collaborative efforts are most likely to be achieved through the following tenets: defining appropriate roles for military forces at the beginning of humanitarian operations (optimally the provision of transportation, logistical coordination, and security), promoting development of ongoing relationships between civilian and military agencies, establishment of humanitarian aid training programs for Department of Defense personnel, and the need for the military to develop and use quantitative aid impact indicators for assuring quality and effectiveness of humanitarian aid.

KSC-2009-1594

NASA Image and Video Library

2009-02-09

VANDENBERG AIR FORCE BASE, Calif. -- Workers check the movement of the fairing at right toward NASA's Orbiting Carbon Observatory, or OCO, at left, to complete installation. The work is being done in Building 1032 of Vandenberg Air Force Base in California. The fairing is a molded structure that fits flush with the outside surface of the rocket and forms an aerodynamically smooth nose cone, protecting the spacecraft during launch and ascent. The spacecraft is scheduled for launch aboard Orbital Sciences' Taurus XL rocket on Feb. 23 from Vandenberg. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. This improved understanding will enable more reliable forecasts of future changes in the abundance and distribution of CO2 in the atmosphere and the effect that these changes may have on the Earth's climate. Photo credit: NASA/Robert Hargreaves Jr., VAFB

KSC-2009-1595

NASA Image and Video Library

2009-02-09

VANDENBERG AIR FORCE BASE, Calif. -- Workers secure the installation of the fairing around NASA's Orbiting Carbon Observatory, or OCO. The work is being done in Building 1032 of Vandenberg Air Force Base in California. The fairing is a molded structure that fits flush with the outside surface of the rocket and forms an aerodynamically smooth nose cone, protecting the spacecraft during launch and ascent. The spacecraft is scheduled for launch aboard Orbital Sciences' Taurus XL rocket on Feb. 23 from Vandenberg. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. This improved understanding will enable more reliable forecasts of future changes in the abundance and distribution of CO2 in the atmosphere and the effect that these changes may have on the Earth's climate. Photo credit: NASA/Robert Hargreaves Jr., VAFB

KSC-2009-1591

NASA Image and Video Library

2009-02-09

VANDENBERG AIR FORCE BASE, Calif. -- At left, the second half of the fairing is moved toward NASA's Orbiting Carbon Observatory, or OCO, at right, for installation. The work is being done in Building 1032 of Vandenberg Air Force Base in California. The fairing is a molded structure that fits flush with the outside surface of the rocket and forms an aerodynamically smooth nose cone, protecting the spacecraft during launch and ascent. The spacecraft is scheduled for launch aboard Orbital Sciences' Taurus XL rocket on Feb. 23 from Vandenberg. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. This improved understanding will enable more reliable forecasts of future changes in the abundance and distribution of CO2 in the atmosphere and the effect that these changes may have on the Earth's climate. Photo credit: NASA/Robert Hargreaves Jr., VAFB

KSC-2009-1593

NASA Image and Video Library

2009-02-09

VANDENBERG AIR FORCE BASE, Calif. -- – Workers check the movement of the fairing at right toward NASA's Orbiting Carbon Observatory, or OCO, at left, to complete installation. The work is being done in Building 1032 of Vandenberg Air Force Base in California. The fairing is a molded structure that fits flush with the outside surface of the rocket and forms an aerodynamically smooth nose cone, protecting the spacecraft during launch and ascent. The spacecraft is scheduled for launch aboard Orbital Sciences' Taurus XL rocket on Feb. 23 from Vandenberg. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. This improved understanding will enable more reliable forecasts of future changes in the abundance and distribution of CO2 in the atmosphere and the effect that these changes may have on the Earth's climate. Photo credit: NASA/Robert Hargreaves Jr., VAFB

KSC-2009-1592

NASA Image and Video Library

2009-02-09

VANDENBERG AIR FORCE BASE, Calif. -- The second half of the fairing, at right, is moved closer to NASA's Orbiting Carbon Observatory, or OCO, at left, to complete installation. The work is being done in Building 1032 of Vandenberg Air Force Base in California. The fairing is a molded structure that fits flush with the outside surface of the rocket and forms an aerodynamically smooth nose cone, protecting the spacecraft during launch and ascent. The spacecraft is scheduled for launch aboard Orbital Sciences' Taurus XL rocket on Feb. 23 from Vandenberg. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. This improved understanding will enable more reliable forecasts of future changes in the abundance and distribution of CO2 in the atmosphere and the effect that these changes may have on the Earth's climate. Photo credit: NASA/Robert Hargreaves Jr., VAFB

The Yarkovsky and YORP Effects

NASA Astrophysics Data System (ADS)

Vokrouhlický, D.; Bottke, W. F.; Chesley, S. R.; Scheeres, D. J.; Statler, T. S.

The Yarkovsky effect describes a small but significant force that affects the orbital motion of meteoroids and asteroids smaller than 30-40 km in diameter. It is caused by sunlight; when these bodies heat up in the Sun, they eventually reradiate the energy away in the thermal waveband, which in turn creates a tiny thrust. This recoil acceleration is much weaker than solar and planetary gravitational forces, but it can produce measurable orbital changes over decades and substantial orbital effects over millions to billions of years. The same physical phenomenon also creates a thermal torque that, complemented by a torque produced by scattered sunlight, can modify the rotation rates and obliquities of small bodies as well. This rotational variant has been coined the Yarkovsky-O'Keefe-Radzievskii-Paddack (YORP) effect. During the past decade or so, the Yarkovsky and YORP effects have been used to explore and potentially resolve a number of unsolved mysteries in planetary science dealing with small bodies. Here we review the main results to date, and preview the goals for future work.

Rotary-Atomizer Electric Power Generator

NASA Astrophysics Data System (ADS)

Nguyen, Trieu; Tran, Tuan; de Boer, Hans; van den Berg, Albert; Eijkel, Jan C. T.

2015-03-01

We report experimental and theoretical results on a ballistic energy-conversion method based on a rotary atomizer working with a droplet acceleration-deceleration cycle. In a rotary atomizer, liquid is fed onto the center of a rotating flat surface, where it spreads out under the action of the centrifugal force and creates "atomized" droplets at its edge. The advantage of using a rotary atomizer is that the centrifugal force exerted on the fluid on a smooth, large surface is not only a robust form of acceleration, as it avoids clogging, but also easily allows high throughput, and produces high electrical power. We successfully demonstrate an output power of 4.9 mW and a high voltage up to 3120 V. At present, the efficiency of the system is still low (0.14%). However, the conversion mechanism of the system is fully interpreted in this paper, permitting a conceptual understanding of system operation and providing a roadmap for system optimization. This observation will open up a road for building power-generation systems in the near future.

Canine Supply for Physical Security: An Analysis of the Royal Australian Air Force Military Working Dog Program

DTIC Science & Technology

2016-03-01

PHYSICAL SECURITY: AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM by Mark W. Powell March 2016 Thesis...AN ANALYSIS OF THE ROYAL AUSTRALIAN AIR FORCE MILITARY WORKING DOG PROGRAM 5. FUNDING NUMBERS 6. AUTHOR(S) Mark W. Powell 7. PERFORMING...increased demand on its physical security elements. Its military working dog (MWD) workforce is required to meet an inventory of 204 by end of year 2023 as

Climate Implications of the Heterogeneity of Anthropogenic Aerosol Forcing

NASA Astrophysics Data System (ADS)

Persad, Geeta Gayatri

Short-lived anthropogenic aerosols are concentrated in regions of high human activity, where they interact with radiation and clouds, causing horizontally heterogeneous radiative forcing between polluted and unpolluted regions. Aerosols can absorb shortwave energy in the atmosphere, but deplete it at the surface, producing opposite radiative perturbations between the surface and atmosphere. This thesis investigates climate and policy implications of this horizontal and vertical heterogeneity of anthropogenic aerosol forcing, employing the Geophysical Fluid Dynamics Laboratory's AM2.1 and AM3 models, both at a global scale and using East Asia as a regional case study. The degree of difference between spatial patterns of climate change due to heterogeneous aerosol forcing versus homogeneous greenhouse gas forcing deeply impacts the detection, attribution, and prediction of regional climate change. This dissertation addresses a gap in current understanding of these two forcings' response pattern development, using AM2.1 historical forcing simulations. The results indicate that fast atmospheric and land-surface processes alone substantially homogenize the global pattern of surface energy flux response to heterogeneous aerosol forcing. Aerosols' vertical redistribution of energy significantly impacts regional climate, but is incompletely understood. It is newly identified here, via observations and historical and idealized forcing simulations, that increased aerosol-driven atmospheric absorption may explain half of East Asia's recent surface insolation decline. Further, aerosols' surface and atmospheric effects counteract each other regionally---atmospheric heating enhances summer monsoon circulation, while surface dimming suppresses it---but absorbing aerosols' combined effects reduce summer monsoon rainfall. This thesis constitutes the first vertical decomposition of aerosols' impacts in this high-emissions region and elucidates the monsoonal response to aerosols' surface versus atmospheric forcing. Future aerosol emissions patterns will affect the distribution of regional climate impacts. This dissertation interrogates how international trade affects existing assumptions about East Asia's future black carbon aerosol emissions, using integrated assessment modeling, emissions and economic data, and AM3 simulations. Exports emerge as a uniquely large and potentially growing source of Chinese black carbon emissions that could impede projected regional emissions reductions, with substantial climate and health consequences. The findings encourage greater emissions projection sophistication and illustrate how societal decisions may influence future aerosol forcing heterogeneity.