Distribution, densities, and ecology of Siberian cranes in the Khroma River region of northern Yakutia in northeastern Russia

USGS Publications Warehouse

Bysykatova, Inga P.; Krapu, Gary L.; Germogenov, Nicolai I.; Buhl, Deborah A.; Aborn, David

2014-01-01

The Siberian crane (Grus leucogeranus) is the third rarest crane species in the world with a breeding range now centered on 3 core areas and a buffer zone in the arctic of northern Yakutia in northeastern Russia. During 16 July-2 August 2009, we undertook ground surveys within the Khroma River core breeding area, surrounding buffer zone, and lands lying to the west of the known rbeeding range to estimate densities and determine habitat use and social status of Siberian cranes. A total of 142 Siberian cranes were sighted (including 55 pairs) at 54 locations with 32 cranes (including 13 pairs) sighted outside the currently known breeding range in the lower drainages of the Syalakh and Syuryuktyakh Rivers. After adjusting for a probability of detection of 0.484 (95% CI = 0.281-0.833), Siberian crane densities in the Khroma core area and the buffer zone averaged 0.0921 cranes/km2 and 0.0363 cranes/km2, respectively. A majority of cranes (n = 93 [65%]) occurred in complexes of large basin wetlands, with use centered in those having extensive beds of pendant grass (Arctophila fulva). Of the 142 cranes seen, 110 (77%) were paired, 21 (15%) were singles, and 11 (8%) were in groups of 3-5. The Khroma core supports 1 of 2 large concentrations of breeding Siberian cranes remaining in the wild; therefore, we recommend that consideration be given to designating a nature reserve that would encompass the Khroma core, adjacent buffer zone, and lands to the west (including coastal tundra areas along the lower drainages of the Syalah and Syuryuktyah Rivers). Further research is needed to gain additional insight into Siberian crane distribution and numbers on lands beyond the currently delineated western boundary of the Siberian crane breeding range in the Ust-Yana District of northern Yakutia. Important gaps remain in information needed to effectively guide conservation efforts for the Eastern Population, and recent advances in remote tracking technology offer potential

Promethium-147 capacitor.

PubMed

Kavetskiy, A; Yakubova, G; Lin, Q; Chan, D; Yousaf, S M; Bower, K; Robertson, J D; Garnov, A; Meier, D

2009-06-01

Beta particle surface fluxes for tritium, Ni-63, Pm-147, and Sr-90 sources were calculated in this work. High current density was experimentally achieved from Pm-147 oxide in silica-titana glass. A 96 GBq (2.6 Ci) Pm-147 4pi-source with flux efficiency greater than 50% was used for constructing a direct charge capacitor with a polyimide coated collector and vacuum as electrical insulation. The capacitor connected to high resistance (TOmega) loads produced up to 35 kV. Overall conversion efficiency was over 10% (on optimal load).

Low temperature grown ZnO@TiO{sub 2} core shell nanorod arrays for dye sensitized solar cell application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goh, Gregory Kia Liang; Le, Hong Quang, E-mail: lehq@imre.a-star.edu.sg; Huang, Tang Jiao

High aspect ratio ZnO nanorod arrays were synthesized on fluorine-doped tin oxide glasses via a low temperature solution method. By adjusting the growth condition and adding polyethylenimine, ZnO nanorod arrays with tunable length were successfully achieved. The ZnO@TiO{sub 2} core shells structures were realized by a fast growth method of immersion into a (NH{sub 4}){sub 2}·TiF{sub 6} solution. Transmission electron microscopy, X-ray Diffraction and energy dispersive X-ray measurements all confirmed the existence of a titania shell uniformly covering the ZnO nanorod's surface. Results of solar cell testing showed that addition of a TiO{sub 2} shell to the ZnO nanorod significantlymore » increased short circuit current (from 4.2 to 5.2 mA/cm{sup 2}), open circuit voltage (from 0.6 V to 0.8 V) and fill factor (from 42.8% to 73.02%). The overall cell efficiency jumped from 1.1% for bare ZnO nanorod to 3.03% for a ZnO@TiO{sub 2} core shell structured solar cell with a 18–22 nm shell thickness, a nearly threefold increase. - Graphical abstract: The synthesis process of coating TiO{sub 2} shell onto ZnO nanorod core is shown schematically. A thin, uniform, and conformal shell had been grown on the surface of the ZnO core after immersing in the (NH{sub 4}){sub 2}·TiF{sub 6} solution for 5–15 min. - Highlights: • ZnO@TiO{sub 2} core shell nanorod has been grown on FTO substrate using low temperature solution method. • TEM, XRD, EDX results confirmed the existing of titana shell, uniformly covered rod's surface. • TiO{sub 2} shell suppressed recombination, demonstrated significant enhancement in cell's efficiency. • Core shell DSSC's efficiency achieved as high as 3.03%, 3 times higher than that of ZnO nanorods.« less