Thermometer use among Mexican immigrant mothers in California.

PubMed

Schwartz, N; Guendelman, S; English, P

1997-11-01

A community-based household survey was utilized to assess the relationship between thermometer use, home treatment and utilization of health care services. Using a cross-sectional design, the study surveyed 688 low income Mexican origin mothers of children between the ages of 8 and 16 months in San Diego County. Mothers were asked how they determine that their child has fever and how often they use a thermometer. Nearly 40% of low income Mexican mothers interviewed in San Diego county never used a thermometer for determining childhood fever. Approximately two-thirds (64.7%) relied either primarily or exclusively on embodied methods such as visual observation or touch to determine fever in their child. A multivariate logistic regression analysis determined that low education and a separated or divorced marital status decreased the odds of thermometer use, whereas regular contact with the health care system doubled the likelihood of thermometer use. Mothers who relied on embodied methods were more likely to use over-the-counter medications than those who relied on thermometers; however, no significant differences were found between groups using other methods of home treatment. Fever determination modalities can be used to screen for lack of access to care and to provide for other health care needs in a culturally appropriate manner. While clinicians' expectations may include parental experience with temperature taking, current pediatric literature questions the need for home-based thermometer use. Possible alternatives to the traditional rectal thermometer might include digital thermometers and color coded thermometer strips.

A silicon nanowire heater and thermometer

NASA Astrophysics Data System (ADS)

Zhao, Xingyan; Dan, Yaping

2017-07-01

In the thermal conductivity measurements of thermoelectric materials, heaters and thermometers made of the same semiconducting materials under test, forming a homogeneous system, will significantly simplify fabrication and integration. In this work, we demonstrate a high-performance heater and thermometer made of single silicon nanowires (SiNWs). The SiNWs are patterned out of a silicon-on-insulator wafer by CMOS-compatible fabrication processes. The electronic properties of the nanowires are characterized by four-probe and low temperature Hall effect measurements. The I-V curves of the nanowires are linear at small voltage bias. The temperature dependence of the nanowire resistance allows the nanowire to be used as a highly sensitive thermometer. At high voltage bias, the I-V curves of the nanowire become nonlinear due to the effect of Joule heating. The temperature of the nanowire heater can be accurately monitored by the nanowire itself as a thermometer.

Infrared Thermometers

ERIC Educational Resources Information Center

Schaefers, John

2006-01-01

An infrared (IR) thermometer lab offers the opportunity to give science students a chance to measure surface temperatures, utilizing off-the-shelf technology. Potential areas of study include astronomy (exoplanets), electromagnetic spectrum, chemistry, evaporation rates, anatomy, crystal formation, and water or liquids. This article presents one…

Usability evaluation of the digital anger thermometer app.

PubMed

Mattson, Donald C

2017-09-01

The digital anger thermometer is a prototype for a mobile application (app) for use with adults in anger management treatment. The digital anger thermometer incorporates standards of software development in addition to anger management resources from the Substance Abuse and Mental Health Services Administration. The digital anger thermometer underwent a usability study conducted by five expert reviewers. The results indicate that it is easy to learn, efficient, and ergonomically sound. However, it does not offer support features or user-error tolerance. The digital anger thermometer prototype requires additional usability studies and comparative research in order for it to become an actual mental health app.

Assessing the appropriateness of information on childhood fever in thermometer package leaflets: a systematic audit of thermometers available in the UK.

PubMed

Hernandez, Jose; Nicholson, Brian D; Thompson, Matthew

2015-06-01

Thermometers are found in most parents' homes, but little is known about the quality and accuracy of the information they provide, nor its consistency with current guidelines for managing fever. To compare information included with commonly available thermometers with National Institute for Health and Care Excellence (NICE) guidance for management of feverish illness in children. Systematic thermometer sampling from UK retailers between February 2013 and May 2013. Information was extracted from device packaging and leaflets on details and type of thermometer, instructions for use, normal ranges, and fever thresholds cited. This was compared with key parental recommendations from the 2013 NICE guidance on feverish illness in children. Associations were explored between cost of device and level of information. There were 123 thermometers identified (ranging from £0.99 to £69.99), none of which made explicit reference to NICE guidance. Most (n = 81, 65.9%) recommended use at a body site consistent with NICE guidance, but only 17 (13.8%) defined fever using the correct threshold (≥38.0°C), and few (n = 12, 9.8%) included advice on fever management, of which four suggested actions not advised by NICE. There was no association between thermometer cost and provision of information consistent with NICE guidance. Parents and caregivers have access to a large number of thermometers, yet they lack evidence-based information about fever detection and management, and in some cases contain misleading information. This represents a missed opportunity to disseminate best practices from guidelines for management of fever in children, and thermometer manufacturers are urged to include information consistent with current guidance. © British Journal of General Practice 2015.

Time's Up, Turkey--Pop-Up Thermometers

ERIC Educational Resources Information Center

Moyer, Richard; Everett, Susan

2009-01-01

Meat thermometers can be awkward to use in terms of placement and avoidance of bones. Because of these problems, each year 30 million Thanksgiving turkeys have a built-in thermometer that pops up when the turkey is properly cooked. Turkey timers are an example of how engineering solved a common, everyday problem. The following 5E learning cycle…

Accuracy of tympanic and infrared skin thermometers in children.

PubMed

Paes, B F; Vermeulen, K; Brohet, R M; van der Ploeg, T; de Winter, J P

2010-12-01

Rectal measurement is considered a gold standard in many healthcare systems for body temperature measurement in children. Although this method has several disadvantages, an ideal alternative thermometer has not yet been introduced. However tympanic and infrared skin thermometers are potential alternatives. A prospective cohort study was performed including 100 children between 0 and 18 years of age admitted to the general paediatric ward of Spaarne Hospital in The Netherlands between January and March 2009. The objectives of this study are to evaluate the accuracy of tympanic and two types of infrared skin thermometers (Beurer and Thermofocus) compared to rectal measurement and furthermore to evaluate the influence of different variables on temperature measurements. Compared to rectal measurement (37.56°C), the mean temperatures of the tympanic (37.29°C), Beurer (36.79°C) and Thermofocus (37.30°C) thermometers differed significantly (p<0.001). Mean and SD of differences between rectal temperature and temperature measured with these alternative devices varied significantly (p<0.001). Sensitivity, specificity, positive and negative predictive values for detecting rectal fever measured with the tympanic, Beurer and Thermofocus thermometers are unacceptable, especially for the Beurer thermometer. This difference in temperature between rectal and the alternative thermometers remained after stratification on gender, age, skin colour and otoscopic abnormalities. In this study the authors demonstrated that the tympanic, Beurer and Thermofocus thermometers cannot reliably predict rectal temperature. Therefore the authors do not advise replacement of rectal measurement as the gold standard for detecting fever in children by one of these devices. When rectal measurement is not used, the infrared skin thermometers appear to perform less well than tympanic measurements.

NIST-NRC Comparison of Total Immersion Liquid-in-Glass Thermometers

NASA Astrophysics Data System (ADS)

Hill, K. D.; Gee, D. J.; Cross, C. D.; Strouse, G. F.

2009-02-01

The use of liquid-in-glass (LIG) thermometers is described in many documentary standards in the fields of environmental testing, material testing, and material transfer. Many national metrology institutes, including the National Institute of Standards and Technology (NIST) and the National Research Council of Canada (NRC), list calibration services for these thermometers among the Calibration Measurement Capabilities of Appendix C of the BIPM Key Comparison Database. NIST and NRC arranged a bilateral comparison of a set of total-immersion ASTM-type LIG thermometers to validate their uncertainty claims. Two each of ASTM thermometer types 62C through 69C were calibrated at NIST and at NRC at four temperatures distributed over the range appropriate to each thermometer, in addition to the ice point. Collectively, the thermometers span a temperature range of - 38 °C to 305 °C. In total, 160 measurements (80 pairs) comprise the comparison data set. Pair-wise differences ( T NIST- T NRC) were formed for each thermometer at each temperature. For 8 of the 80 pairs (10 %), the differences exceed the k = 2 combined uncertainties. These results support the claimed capabilities of NIST and NRC for the calibration of LIG thermometers.

Report On Design And Preliminary Data Of Halden In-Pile Creep Rig

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terrani, Kurt A; Karlsen, T. M.; Yamamoto, Yukinori

2015-09-01

A set of in-pile creep tests is ongoing in the Halden reactor on ORNL’s candidate accident tolerant fuel cladding materials. These tests are meant to provide essential material property information that is needed for an informed analysis of these fuel concepts under normal operating conditions. These tests provide detailed information regarding swelling, thermal creep, and irradiation creep rates of these materials. The results to date have been compared with the limited set of information available in literature that is form irradiation tests in other reactors or out-of-pile tests. Most of the results are in good agreement with prior literature, exceptmore » for irradiation creep rate of SiC. To elucidate the difference between the HFIR and Halden test results continued testing is necessary. The tests describe in this progress report are ongoing and will continue for at least another year.« less

Evaluation of industrial platinum resistance thermometers

NASA Technical Reports Server (NTRS)

Daryabeigi, Kamran; Dillontownes, Lawrence A.; Alderfer, David W.

1987-01-01

The calibration and stability of four surface temperature measuring industrial platinum resistance thermometers for use in the temperature range -120 C to 160 C was investigated. It was found that the calibration formulation of the International Practical Temperature Scale of 1968 provided the most accurate calibration. It was also found that all the resistance thermometers suffered from varying degrees of instability and hysteresis.

Intravenous fluid temperature management by infrared thermometer.

PubMed

Lapostolle, Frédéric; Catineau, Jean; Le Toumelin, Philippe; Proust, Clément; Garrigue, Bruno; Galinski, Michel; Adnet, Frédéric

2006-03-01

The management of intravenous (IV) fluid temperature is a daily challenge in critical care, anesthesiology, and emergency medicine. Infusion of IV fluids at the right temperature partly influences clinical outcomes of critically ill patients. Nowadays, intravenous fluid temperature is poorly managed, as no suitable device is routinely available. Infrared (IR) thermometers have been recently developed for industrial, personal, or medical purposes. The aim of this study was to evaluate the accuracy of an IR thermometer in measuring temperature of warmed and cooled infusion fluids in fluid bags. This study compared temperatures simultaneously recorded by an infrared thermometer and a temperature sensor. Temperatures of warmed (41 degrees C) and cooled (4 degrees C) infusion fluids in fluid bags were recorded by 2 independent operators every minute until IV bags' temperature reached ambient temperature. The relation curve was established with 576 measures. Temperature measures performed with an IR thermometer were perfectly linear and perfectly correlated with the reference method (R(2) = 0.995, P < 10(-5)). Infrared thermometers are efficient to measure IV fluid bag temperature in the range of temperatures used in clinical practice. As these devices are easy to use and inexpensive, they could be largely used in critical care, anesthesiology, or emergency medicine.

21 CFR 880.2910 - Clinical electronic thermometer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Clinical electronic thermometer. 880.2910 Section... Monitoring Devices § 880.2910 Clinical electronic thermometer. (a) Identification. A clinical electronic... with an electronic signal amplification, conditioning, and display unit. The transducer may be in a...

21 CFR 880.2910 - Clinical electronic thermometer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Clinical electronic thermometer. 880.2910 Section... Monitoring Devices § 880.2910 Clinical electronic thermometer. (a) Identification. A clinical electronic... with an electronic signal amplification, conditioning, and display unit. The transducer may be in a...

21 CFR 880.2910 - Clinical electronic thermometer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Clinical electronic thermometer. 880.2910 Section... Monitoring Devices § 880.2910 Clinical electronic thermometer. (a) Identification. A clinical electronic... with an electronic signal amplification, conditioning, and display unit. The transducer may be in a...

21 CFR 880.2910 - Clinical electronic thermometer.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Clinical electronic thermometer. 880.2910 Section... Monitoring Devices § 880.2910 Clinical electronic thermometer. (a) Identification. A clinical electronic... with an electronic signal amplification, conditioning, and display unit. The transducer may be in a...

21 CFR 880.2910 - Clinical electronic thermometer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Clinical electronic thermometer. 880.2910 Section... Monitoring Devices § 880.2910 Clinical electronic thermometer. (a) Identification. A clinical electronic... with an electronic signal amplification, conditioning, and display unit. The transducer may be in a...

Superconducting gamma and fast-neutron spectrometers with high energy resolution

DOEpatents

Friedrich, Stephan; , Niedermayr, Thomas R.; Labov, Simon E.

2008-11-04

Superconducting Gamma-ray and fast-neutron spectrometers with very high energy resolution operated at very low temperatures are provided. The sensor consists of a bulk absorber and a superconducting thermometer weakly coupled to a cold reservoir, and determines the energy of the incident particle from the rise in temperature upon absorption. A superconducting film operated at the transition between its superconducting and its normal state is used as the thermometer, and sensor operation at reservoir temperatures around 0.1 K reduces thermal fluctuations and thus enables very high energy resolution. Depending on the choice of absorber material, the spectrometer can be configured either as a Gamma-spectrometer or as a fast-neutron spectrometer.

Germanium Resistance Thermometer For Subkelvin Temperatures

NASA Technical Reports Server (NTRS)

Castles, Stephen H.

1993-01-01

Improved germanium resistance thermometer measures temperatures as small as 0.01 K accurately. Design provides large area for electrical connections (to reduce electrical gradients and increase sensitivity to changes in temperatures) and large heat sink (to minimize resistance heating). Gold pads on top and bottom of germanium crystal distribute electrical current and flow of heat nearly uniformly across crystal. Less expensive than magnetic thermometers or superconducting quantum interference devices (SQUID's) otherwise used.

Comparative Study of Two InGaAs-Based Reference Radiation Thermometers

NASA Astrophysics Data System (ADS)

Nasibov, H.; Diril, A.; Pehlivan, O.; Kalemci, M.

2017-07-01

More than one decade ago, an InGaAs detector-based transfer standard infrared radiation thermometer working in the temperature range from 150 {^{circ }}\\hbox {C} to 1100 {^{circ }}\\hbox {C} was built at TUBITAK UME in the scope of collaboration with IMGC (INRIM since 2006). During this timescale, the radiation thermometer was used for the dissemination of the radiation temperature scale below the silver fixed-point temperature. Recently, a new radiation thermometer with the same design but with different spectral responsivity was constructed and employed in the laboratory. In this work, we present the comparative study of these thermometers. Furthermore, the paper describes the measurement results of the thermometer's main characteristics such as the size-of-source effect, spectral responsivity, gain ratio, and linearity. Besides, both thermometers were calibrated at the freezing temperatures of indium, tin, zinc, aluminum, and copper reference fixed-point blackbodies. The main study is focused on the impact of the spectral responsivity of thermometers on the interpolation parameters of the Sakuma-Hattori equation. Furthermore, the calibration results and the uncertainty sources are discussed in this paper.

Measurement of body temperature by use of auricular thermometers versus rectal thermometers in dogs with otitis externa.

PubMed

González, A Michelle; Mann, F A; Preziosi, Diane E; Meadows, Richard L; Wagner-Mann, Colette C

2002-08-01

To compare measurements of body temperature obtained with auricular thermometers versus rectal thermometers in dogs with otitis externa. Prospective study. 100 client-owned dogs: 50 with and 50 without clinical evidence of otitis externa. Dogs were evaluated for the presence of otitis externa on the basis of clinical signs, otoscopic examination, and cytologic evaluation of ear exudate. Auricular and rectal temperatures were obtained simultaneously in all dogs prior to and following ear examination. There was a high correlation between auricular and rectal temperatures in dogs with otitis externa both prior to and after ear manipulation. Significant differences were not detected in temperature measurements among dogs with different degrees of otitis externa. Auricular temperature readings obtained by use of an auricular thermometer in dogs with otitis externa are accurate measurements of body temperature, compared with rectal temperature measurements. Temperature measurements are reliable before and after examination of the ear canal.

Measuring Systems for Thermometer Calibration in Low-Temperature Range

NASA Astrophysics Data System (ADS)

Szmyrka-Grzebyk, A.; Lipiński, L.; Manuszkiewicz, H.; Kowal, A.; Grykałowska, A.; Jancewicz, D.

2011-12-01

The national temperature standard for the low-temperature range between 13.8033 K and 273.16 K has been established in Poland at the Institute of Low Temperature and Structure Research (INTiBS). The standard consists of sealed cells for realization of six fixed points of the International Temperature Scale of 1990 (ITS-90) in the low-temperature range, an adiabatic cryostat and Isotech water and mercury triple-point baths, capsule standard resistance thermometers (CSPRT), and AC and DC bridges with standard resistors for thermometers resistance measurements. INTiBS calibrates CSPRTs at the low-temperature fixed points with uncertainties less than 1 mK. In lower temperature range—between 2.5 K and about 25 K — rhodium-iron (RhFe) resistance thermometers are calibrated by comparison with a standard which participated in the EURAMET.T-K1.1 comparison. INTiBS offers a calibration service for industrial platinum resistance thermometers and for digital thermometers between 77 K and 273 K. These types of thermometers may be calibrated at INTiBS also in a higher temperature range up to 550°C. The Laboratory of Temperature Standard at INTiBS acquired an accreditation from the Polish Centre for Accreditation. A management system according to EN ISO/IEC 17025:2005 was established at the Laboratory and presented on EURAMET QSM Forum.

21 CFR 880.2900 - Clinical color change thermometer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Clinical color change thermometer. 880.2900... Monitoring Devices § 880.2900 Clinical color change thermometer. (a) Identification. A clinical color change... end of a plastic or metal strip. Body heat causes a stable color change in the heat sensitive...

Galileo Chain Thermometer

ERIC Educational Resources Information Center

Ucke, C.; Schlichting, H. J.

2017-01-01

This relatively rare thermometer has a rather unusual display: lower temperatures are located at the top of the scale, higher ones at the bottom. A sphere on a chain floats in a suitable liquid, sinking at high temperatures when the density of the liquid decreases and rising in the increased density at low temperatures. With reasonable effort and…

A Miniature Palladium-Iron Thermometer for Temperatures Down to 0.05 K

NASA Technical Reports Server (NTRS)

Tuttle, Jim; DiPirro, Michael; Canavan, Ed; Shirron, Peter; Kunes, Evan; Hait, Tom; Krebs, Carolyn (Technical Monitor)

2001-01-01

Magnetic thermometers are appealing at temperatures below about 0.1 Kelvin, because the avoid the noise self-heating problems associated with resistive thermometers. In practical, metallic dilute electronic thermometers add the advantages of chemical stability, high thermal conductivity, and easy in heat sinking work we describe a palladium-iron thermometer which was designed to be small and conveniently packaged and optimized for use at temperatures down to 0.05 Kelvin. The device showed Curie-Weiss behavior above about 0.06 Kelvin, and we achieve 41 nK/ square root of z temperature resolution at a temperature of 49 mK. We describe the design and operation of this thermometers and present the test results.

Sapphire Whispering Gallery Thermometer

NASA Astrophysics Data System (ADS)

Strouse, G. F.

2007-12-01

An innovative sapphire whispering gallery thermometer (SWGT) is being explored at the National Institute of Standards and Technology (NIST) as a potential replacement for a standard platinum resistance thermometer (SPRT) for industrial applications that require measurement uncertainties of ≤ 10 mK. The NIST SWGT uses a synthetic sapphire monocrystalline disk configured as a uniaxial, dielectric resonator with whispering gallery modes between 14 GHz and 20 GHz and with Q-factors as large as 90,000. The prototype SWGT stability at the ice melting point (0°C) is ≤ 1 mK with a frequency resolution equivalent to 0.05 mK. The prototype SWGT measurement uncertainty ( k= 1) is 10 mK from 0°C to 100°C for all five resonance modes studied. These results for the SWGT approach the capabilities of industrial resistance thermometers. The SWGT promises greatly increased resistance to mechanical shock relative to SPRTs, over the range from -196°C to 500°C while retaining the low uncertainties needed by secondary calibration laboratories. The temperature sensitivity of the SWGT depends upon a well-defined property (the refractive index at microwave frequencies) and the thermal expansion of a pure material. Therefore, it is expected that SWGTs can be calibrated over a wide temperature range using a reference function, along with deviations measured at a few fixed points. This article reports the prototype SWGT stability, resolution, repeatability, and the temperature dependence of five whispering gallery resonance frequencies in the range from 0°C to 100°C.

A Non-Mercury Thermometer Alternative for Use in Older Melting Point Apparatuses

ERIC Educational Resources Information Center

Ongley, Lois K.; Kern, Clayton S.; Woods, Barry W.

2008-01-01

The State of Maine seeks to eliminate most mercury use. This includes removing mercury thermometers from secondary schools and discouraging Hg use in other educational institutions. Alternatives to mercury thermometers in chemical laboratory work include non-mercury thermometers, temperature probes, and thermocouples. In organic chemistry mercury…

Validation of Calculations in a Digital Thermometer Firmware

NASA Astrophysics Data System (ADS)

Batagelj, V.; Miklavec, A.; Bojkovski, J.

2014-04-01

State-of-the-art digital thermometers are arguably remarkable measurement instruments, measuring outputs from resistance thermometers and/or thermocouples. Not only that they can readily achieve measuring accuracies in the parts-per-million range, but they also incorporate sophisticated algorithms for the transformation calculation of the measured resistance or voltage to temperature. These algorithms often include high-order polynomials, exponentials and logarithms, and must be performed using both standard coefficients and particular calibration coefficients. The numerical accuracy of these calculations and the associated uncertainty component must be much better than the accuracy of the raw measurement in order to be negligible in the total measurement uncertainty. In order for the end-user to gain confidence in these calculations as well as to conform to formal requirements of ISO/IEC 17025 and other standards, a way of validation of these numerical procedures performed in the firmware of the instrument is required. A software architecture which allows a simple validation of internal measuring instrument calculations is suggested. The digital thermometer should be able to expose all its internal calculation functions to the communication interface, so the end-user can compare the results of the internal measuring instrument calculation with reference results. The method can be regarded as a variation of the black-box software validation. Validation results on a thermometer prototype with implemented validation ability show that the calculation error of basic arithmetic operations is within the expected rounding error. For conversion functions, the calculation error is at least ten times smaller than the thermometer effective resolution for the particular probe type.

Thermometers and thermobarometers in granitic systems

USGS Publications Warehouse

Anderson, J.L.; Barth, A.P.; Wooden, J.L.; Mazdab, F.; ,

2008-01-01

The ability to determine the thermal and barometric history during crystallization and emplacement of granitic plutons has been enhanced by several new calibrations applicable to granitic mineral assemblages. Other existing calibrations for granitic plutons have continued to be popular and fairly robust. Recent advances include the trace element thermometers Ti-in-quartz, Ti-in-zircon, and Zr-in-sphene (titanite), which need to be further evaluated on the roles of reduced activities due to lack of a saturating phase, the effect of pressure dependence (particularly for the Ti-in-zircon thermometer), and how resistive these thermometers are to subsolidus reequilibration. As zircon and sphene are also hosts to radiogenic isotopes, these minerals potentially also provide new insights into the temperature - time history of magmas. When used in conjunction with pressure-sensitive mineral equilibria in the same rocks, a complete assessment of the P-T-t (pressure-temperature-time) path is possible given that the mineralogy of plutons can reflect crystallization over a range of pressure and temperature during ascent and emplacement and that many intrusions are now seen as forming over several millions of years during the protracted history of batholith construction. Accessory mineral saturation thermometers, such as those for zircon, apatite, and allanite, provide a different and powerful perspective, specifically that of the temperature of the onset of crystallization of these minerals, which can allow an estimate of the range of temperature between the liquidus and solidus of a given pluton. In assessment of the depth of crystallization and emplacement of granitic plutons, the Al-in-hornblende remains popular for metaluminous granites when appropriately corrected for temperature. For peraluminous granites, potential new calibrations exist for the assemblages bearing garnet, biotite, plagioclase, muscovite, and quartz. Other thermometers, based on oxygen abundance, and

27 CFR 30.23 - Use of precision hydrometers and thermometers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... hydrometers and thermometers. 30.23 Section 30.23 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO... Use of precision hydrometers and thermometers. Care should be exercised to obtain accurate hydrometer... entire quantity. The hydrometers should be kept clean and free of any oily substance. Immediately before...

[Application of self-developed moxibustion thermometer in experiment teaching].

PubMed

Zhang, Jing; Sun, Yan; Zhang, Yongchen; Lu, Yan

2017-04-12

In order to improve the teaching quality of moxibustion experiment, a moxibustion thermometer was self-developed to monitor the real-time and continuous data of moxibustion temperature at different time points during the experiment. After teacher's explanation and demonstration of experiment process, the students used the moxibustion thermometer to monitor the change of temperature data and extended the experiment design. In the process of experiment class, the students found the temperature of the object tested increased rapidly, arrived at the highest temperature and slowly reduced. In addition, with learned knowledge, the students were able to design the feasible experiment scheme. The self-developed moxibustion thermometer operates smoothly in actual teaching, with stable experiment data and less experiment error, which obtained satisfactory teaching effect.

DNA nanostructure-based fluorescence thermometer with silver nanoclusters.

PubMed

Bu, Congcong; Mu, Lixuan; Cao, XIngxing; Chen, Min; She, Guangwei; Shi, Wensheng

2018-04-27

Linking the fluorescent silver nanoclusters (AgNCs) and guanine-rich（G-rich）DNA chains by the thermal sensitive DNA stem-loop at teminal 5' and 3', DNA nanostructure-based fluorescence thermometers were fabricated. The variations of the temperature alter the distance between AgNCs and G-rich DNA chain, which could affect the interaction between them. As a result, the intensity of fluorescence emission from AgNCs at 636 nm can be sensitively modulated. It was found that such red emission is more sensitive to the temperature comparing with its intrinsic green emission at 543 nm, and sensitivity of -3.6%/℃ was achieved. Varying the melting temperature of the DNA stem-loop could readily adjust the response temperature range of thermometers. Novel DNA nanostructure-based fluorescence thermometers in this work could be anticipated to measure the temperature of biological system, even a single cell. © 2018 IOP Publishing Ltd.

High speed infrared radiation thermometer, system, and method

DOEpatents

Markham, James R.

2002-01-01

The high-speed radiation thermometer has an infrared measurement wavelength band that is matched to the infrared wavelength band of near-blackbody emittance of ceramic components and ceramic thermal barrier coatings used in turbine engines. It is comprised of a long wavelength infrared detector, a signal amplifier, an analog-to-digital converter, an optical system to collect radiation from the target, an optical filter, and an integral reference signal to maintain a calibrated response. A megahertz range electronic data acquisition system is connected to the radiation detector to operate on raw data obtained. Because the thermometer operates optimally at 8 to 12 .mu.m, where emittance is near-blackbody for ceramics, interferences to measurements performed in turbine engines are minimized. The method and apparatus are optimized to enable mapping of surface temperatures on fast moving ceramic elements, and the thermometer can provide microsecond response, with inherent self-diagnostic and calibration-correction features.

DNA nanostructure-based fluorescence thermometer with silver nanoclusters

NASA Astrophysics Data System (ADS)

Bu, Congcong; Mu, Lixuan; Cao, Xingxing; Chen, Min; She, Guangwei; Shi, Wensheng

2018-07-01

DNA nanostructure-based fluorescence thermometers were fabricated by linking fluorescent silver nanoclusters (AgNCs) and guanine-rich（G-rich）DNA chains via a thermally sensitive DNA stem-loop at terminals 5‧ and 3‧. Variations of temperature alter the distance between the AgNCs and G-rich DNA chain, affecting the interaction between them. As a result, the intensity of fluorescence emission from the AgNCs at 636 nm can be sensitively modulated. It was found that the intensity of such red emission is more temperature sensitive than the equivalent green emission at 543 nm; sensitivity of ‑3.6%/°C was achieved. Through variation of the melting temperature of the DNA stem-loop, the response temperature range of the thermometers could be readily adjusted. Novel DNA nanostructure-based fluorescence thermometers as described in this work are anticipated to be able to measure the temperature of biological systems at small scales—even a single cell.

Eliminating Mercury Thermometers from the Lab.

ERIC Educational Resources Information Center

Everett, T. Stephen

1997-01-01

Compares the precision, accuracy, and response of a cooking probe to a standard mercury thermometer in side-by-side heating in temperature baths, simple and fractional distillations, and melting point determination. (DDR)

Thermal Conductivity and Liquid Crystal Thermometers.

ERIC Educational Resources Information Center

Edge, R. D., Ed.

1993-01-01

Describes using stock liquid crystal postcards as inexpensive classroom thermometers. Also suggests using these postcards as a good visual temperature indicator for classroom demonstrations such as temperature gradients. One such activity is provided. (MVL)

Size-of-source Effect in Infrared Thermometers with Direct Reading of Temperature

NASA Astrophysics Data System (ADS)

Manoi, A.; Saunders, P.

2017-07-01

The size-of-source effect (SSE) for six infrared (IR) thermometers with direct reading of temperature was measured in this work. The alternative direct method for SSE determination, where the aperture size is fixed and the measurement distance is varied, was used in this study. The experimental equivalence between the usual and the alternative direct methods is presented. The magnitudes of the SSE for different types of IR thermometers were investigated. The maxima of the SSE were found to be up to 5 %, 8 %, and 28 % for focusable, closed-focus, and open-focus thermometers, respectively. At 275°C, an SSE of 28 % corresponds to 52°C, indicating the severe effect on the accuracy of this type of IR thermometer. A method to realize the calibration conditions used by the manufacturer, in terms of aperture size and measurement distance, is discussed and validated by experimental results. This study would be of benefit to users in choosing the best IR thermometer to match their work and for calibration laboratories in selecting the technique most suitable for determining the SSE.

Novel MEMS-based thermometer with low power consumption for health-monitoring network application

NASA Astrophysics Data System (ADS)

Zhang, Y.; Ikehara, T.; Lu, J.; Kobayashi, T.; Ichiki, M.; Itoh, T.; Maeda, R.

2007-12-01

We proposed one novel MEMS-based thermometer with low power-consumption for animal/human health-monitoring network application. The novel MEMS-based thermometer was consisted of triple-beam bimorph arrays so that it could work in a continuous temperature range. Neither continuous electric supply nor A/D converter interface is required by the novel thermometer owing to the well-known deflection of bimaterials cantilever upon temperature changes. The triple-beam structure also facilitated the novel thermometer with excellent fabrication feasibility by conventional microfabrication technology. The parameters of the triple-beam bimorph arrays were determined by finite element analysis with ANSYS program. Low stress Au and Mo metal films were used as top and bottom layer, respectively. The deflection of the triple-beam bimorphs were measured on a home-made heating stage by a confocal scanning laser microscopy. The novel bimorphs had temperature responses similar to traditional single-beam bimorphs. Initial bend of the prepared triple-beam bimorphs were dominantly determined by their side beams. The sensitivity of the novel thermometer was as high as 0.1°C. Experimental results showed that the novel thermometer is attractive for network sensing applications where the power capacity is limited.

Optical Sensors for Monitoring Gamma and Neutron Radiation

NASA Technical Reports Server (NTRS)

Boyd, Clark D.

2011-01-01

For safety and efficiency, nuclear reactors must be carefully monitored to provide feedback that enables the fission rate to be held at a constant target level via adjustments in the position of neutron-absorbing rods and moderating coolant flow rates. For automated reactor control, the monitoring system should provide calibrated analog or digital output. The sensors must survive and produce reliable output with minimal drift for at least one to two years, for replacement only during refueling. Small sensor size is preferred to enable more sensors to be placed in the core for more detailed characterization of the local fission rate and fuel consumption, since local deviations from the norm tend to amplify themselves. Currently, reactors are monitored by local power range meters (LPRMs) based on the neutron flux or gamma thermometers based on the gamma flux. LPRMs tend to be bulky, while gamma thermometers are subject to unwanted drift. Both electronic reactor sensors are plagued by electrical noise induced by ionizing radiation near the reactor core. A fiber optic sensor system was developed that is capable of tracking thermal neutron fluence and gamma flux in order to monitor nuclear reactor fission rates. The system provides near-real-time feedback from small- profile probes that are not sensitive to electromagnetic noise. The key novel feature is the practical design of fiber optic radiation sensors. The use of an actinoid element to monitor neutron flux in fiber optic EFPI (extrinsic Fabry-Perot interferometric) sensors is a new use of material. The materials and structure used in the sensor construction can be adjusted to result in a sensor that is sensitive to just thermal, gamma, or neutron stimulus, or any combination of the three. The tested design showed low sensitivity to thermal and gamma stimuli and high sensitivity to neutrons, with a fast response time.

The Infrared Thermometer in School Science: Teaching Physics with Modern Technologies

ERIC Educational Resources Information Center

Girwidz, Raimund; Ireson, Gren

2011-01-01

Infrared thermometers measure temperature from a distance, using the infrared radiation emitted by all objects. These so-called non-contact thermometers make a wide variety of temperature measurement and monitoring activities accessible to school-age students. Portable hand-held sensors also enable new or simplified investigations to be carried…

Make Your Own Digital Thermometer!

ERIC Educational Resources Information Center

Sorey, Timothy; Willard, Teri; Kim, Bom

2010-01-01

In the hands-on, guided-inquiry lesson presented in this article, high school students create, calibrate, and apply an affordable scientific-grade instrument (Lapp and Cyrus 2000). In just four class periods, they build a homemade integrated circuit (IC) digital thermometer, apply a math model to calibrate their instrument, and ask a researchable…

Application of radio frequency based digital thermometer for real-time monitoring of dairy cattle rectal temperature

PubMed Central

Debnath, Tridib; Bera, Santanu; Deb, Suman; Pal, Prasenjit; Debbarma, Nibash; Haldar, Avijit

2017-01-01

Aim: Dairy cattle health monitoring program becomes vital for detecting the febrile conditions to prevent the outbreak of the animal diseases as well as ensuring the fitness of the animals that are directly affecting the health of the consumers. The aim of this study was to validate real-time rectal temperature (RT) data of radio frequency based digital (RFD) thermometer with RT data of mercury bulb (MB) thermometer in dairy cattle. Materials and Methods: Two experiments were conducted. In experiment I, six female Jersey crossbred cattle with a mean (±standard error of the mean) body weight of 534.83±13.90 kg at the age of 12±0.52 years were used to record RT for 2 h on empty stomach and 2 h after feeding at 0, 30, 60, 90, and 120 min using a RFD thermometer as well as a MB thermometer. In experiment II, six female Jersey crossbred cattle were further used to record RT for 2 h before exercise and 2 h after exercise at 0, 30, 60, 90, and 120 min. Two-way repeated measures analysis of variance with post hoc comparisons by Bonferroni test was done. Results: Real-time RT data recorded by RFD thermometer as well as MB thermometer did not differ (p>0.05) before and after feeding/exercise. An increase (p<0.05) in RT after feeding/exercise in experimental crossbred cattle was recorded by both RFD thermometer and MB thermometer. Conclusion: The results obtained in the present study suggest that the body temperature recordings from RFD thermometer would be acceptable and thus RFD thermometer could work well for monitoring real-time RT in cattle. PMID:29062193

Application of radio frequency based digital thermometer for real-time monitoring of dairy cattle rectal temperature.

PubMed

Debnath, Tridib; Bera, Santanu; Deb, Suman; Pal, Prasenjit; Debbarma, Nibash; Haldar, Avijit

2017-09-01

Dairy cattle health monitoring program becomes vital for detecting the febrile conditions to prevent the outbreak of the animal diseases as well as ensuring the fitness of the animals that are directly affecting the health of the consumers. The aim of this study was to validate real-time rectal temperature (RT) data of radio frequency based digital (RFD) thermometer with RT data of mercury bulb (MB) thermometer in dairy cattle. Two experiments were conducted. In experiment I, six female Jersey crossbred cattle with a mean (±standard error of the mean) body weight of 534.83±13.90 kg at the age of 12±0.52 years were used to record RT for 2 h on empty stomach and 2 h after feeding at 0, 30, 60, 90, and 120 min using a RFD thermometer as well as a MB thermometer. In experiment II, six female Jersey crossbred cattle were further used to record RT for 2 h before exercise and 2 h after exercise at 0, 30, 60, 90, and 120 min. Two-way repeated measures analysis of variance with post hoc comparisons by Bonferroni test was done. Real-time RT data recorded by RFD thermometer as well as MB thermometer did not differ (p>0.05) before and after feeding/exercise. An increase (p<0.05) in RT after feeding/exercise in experimental crossbred cattle was recorded by both RFD thermometer and MB thermometer. The results obtained in the present study suggest that the body temperature recordings from RFD thermometer would be acceptable and thus RFD thermometer could work well for monitoring real-time RT in cattle.

The aluminum-in-olivine thermometer for mantle peridotites - Experimental versus empirical calibration and potential applications

NASA Astrophysics Data System (ADS)

Bussweiler, Y.; Brey, G. P.; Pearson, D. G.; Stachel, T.; Stern, R. A.; Hardman, M. F.; Kjarsgaard, B. A.; Jackson, S. E.

2017-02-01

This study provides an experimental calibration of the empirical Al-in-olivine thermometer for mantle peridotites proposed by De Hoog et al. (2010). We report Al concentrations measured by secondary ion mass spectrometry (SIMS) in olivines produced in the original high-pressure, high-temperature, four-phase lherzolite experiments by Brey et al. (1990). These reversed experiments were used for the calibration of the two-pyroxene thermometer and Al-in-orthopyroxene barometer by Brey and Köhler (1990). The experimental conditions of the runs investigated here range from 28 to 60 kbar and 1000 to 1300 °C. Olivine compositions from this range of experiments have Al concentrations that are consistent, within analytical uncertainties, with those predicted by the empirical calibration of the Al-in-olivine thermometer for mantle peridotites. Fitting the experimental data to a thermometer equation, using the least squares method, results in the expression: This version of the Al-in-olivine thermometer appears to be applicable to garnet peridotites (lherzolites and harzburgites) well outside the range of experimental conditions investigated here. However, the thermometer is not applicable to spinel-bearing peridotites. We provide new trace element criteria to distinguish between olivine from garnet-, garnet-spinel-, and spinel-facies peridotites. The estimated accuracy of the thermometer is ± 20 °C. Thus, the thermometer could serve as a useful tool in settings where two-pyroxene thermometry cannot be applied, such as garnet harzburgites and single inclusions in diamond.

A comparison of temporal artery thermometers with internal blood monitors to measure body temperature during hemodialysis.

PubMed

Lunney, Meaghan; Tonelli, Bronwyn; Lewis, Rachel; Wiebe, Natasha; Thomas, Chandra; MacRae, Jennifer; Tonelli, Marcello

2018-06-14

Thermometers that measure core (internal) body temperature are the gold standard for monitoring temperature. Despite that most modern hemodialysis machines are equipped with an internal blood monitor that measures core body temperature, current practice is to use peripheral thermometers. A better understanding of how peripheral thermometers compare with the dialysis machine thermometer may help guide practice. The study followed a prospective cross-sectional design. Hemodialysis patients were recruited from 2 sites in Calgary, Alberta (April - June 2017). Body temperatures were obtained from peripheral (temporal artery) and dialysis machine thermometers concurrently. Paired t-tests, Bland-Altman plots, and quantile-quantile plots were used to compare measurements from the two devices and to explore potential factors affecting temperature in hemodialysis patients. The mean body temperature of 94 hemodialysis patients measured using the temporal artery thermometer (36.7 °C) was significantly different than the dialysis machine thermometer (36.4 °C); p < 0.001. The mean difference (0.27 °C) appeared to be consistent across average temperature (range: 35.8-37.3 °C). Temperature measured by the temporal artery thermometer was statistically and clinically higher than that measured by the dialysis machine thermometer. Using the dialysis machine to monitor body temperature may result in more accurate readings and is likely to reduce the purchasing and maintenance costs associated with manual temperature readings, as well as easing the workload for dialysis staff.

THE DYNAMIC RESPONSE OF THERMOMETER-WELL ASSEMBLIES.

DTIC Science & Technology

parameter models of the thermometric system were constructed and gave acceptable agreement with the experimental results. These models can be used to predict the dynamic behavior of any similar thermometer system. (Author)

Blackbody for metrological control of ear thermometers

NASA Astrophysics Data System (ADS)

Cárdenas-García, D.; Méndez-Lango, E.

2013-09-01

Body temperature is an important parameter in medical practice, and most of health diagnoses are made based upon measured temperature values. Non-contact measurements are attractive to both patients and physicians, and ear thermometers (ET) are part of the set of infrared thermometers for medical applications. ETs sense the tympanic membrane temperature which best represents body temperature. They take advantage of the natural high effective emissivity cavity that is formed as radiation source. To calibrate or to check the performance of ETs, we designed a high-emissivity spherical cavity as a blackbody source which can be placed in a dry block oven. Although the blackbody cavity can have any shape, we decided to build it spherical because its effective emissivity can be easily calculated in a closed form. The cavity is made of Aluminum to take advantage of its high thermal conductivity while its inner side is covered with a black paint to increase the cavity effective emissivity. Based on paint emissivity measurements and the geometrical shape, we calculated that the cavity has an effective emissivity higher than 0.999. Blackbody temperature is measured with a calibrated contact thermometer placed inside the bottom wall of the cavity. We present the design of the cavity, the experimental setup, and results of three commercial ETs compared with this cavity.

Tympanic thermometer performance validation by use of a body-temperature fixed point blackbody

NASA Astrophysics Data System (ADS)

Machin, Graham; Simpson, Robert

2003-04-01

The use of infrared tympanic thermometers within the medical community (and more generically in the public domain) has recently grown rapidly, displacing more traditional forms of thermometry such as mercury-in-glass. Besides the obvious health concerns over mercury the increase in the use of tympanic thermometers is related to a number of factors such as their speed and relatively non-invasive method of operation. The calibration and testing of such devices is covered by a number of international standards (ASTM1, prEN2, JIS3) which specify the design of calibration blackbodies. However these calibration sources are impractical for day-to-day in-situ validation purposes. In addition several studies (e.g. Modell et al4, Craig et al5) have thrown doubt on the accuracy of tympanic thermometers in clinical use. With this in mind the NPL is developing a practical, portable and robust primary reference fixed point source for tympanic thermometer validation. The aim of this simple device is to give the clinician a rapid way of validating the performance of their tympanic thermometer, enabling the detection of mal-functioning thermometers and giving confidence in the measurement to the clinician (and patient!) at point of use. The reference fixed point operates at a temperature of 36.3 °C (97.3 °F) with a repeatability of approximately +/- 20 mK. The fixed-point design has taken into consideration the optical characteristics of tympanic thermometers enabling wide-angled field of view devices to be successfully tested. The overall uncertainty of the device is estimated to be is less than 0.1°C. The paper gives a description of the fixed point, its design and construction as well as the results to date of validation tests.

Demonstrating the Temperature Dependence of Density via Construction of a Galilean Thermometer

ERIC Educational Resources Information Center

Priest, Marie A.; Padgett, Lea W.; Padgett, Clifford W.

2011-01-01

A method for the construction of a Galilean thermometer out of common chemistry glassware is described. Students in a first-semester physical chemistry (thermodynamics) class can construct the Galilean thermometer as an investigation of the thermal expansivity of liquids and the temperature dependence of density. This is an excellent first…

Comparison of infrared thermometer with thermocouple for monitoring skin temperature.

PubMed

Matsukawa, T; Ozaki, M; Nishiyama, T; Imamura, M; Kumazawa, T

2000-02-01

To test the hypothesis that the infrared thermometer (Genius) is comparably useful with thermocouples that are routinely used for skin temperature monitoring. Prospective, controlled, not blinded study. Operating room of a university hospital. Ten healthy male volunteers. Volunteers were minimally clothed and were initially warmed by a forced air warmer until they became vasodilated at the finger and the foot for approximately 30 mins. Subsequently, they were kept in the room with no blanket. Skin temperatures were measured continuously with the Mon-a-Therm thermocouple and were also measured with the Genius thermometer just before and after the warming and subsequently every 10 mins for 70 mins. Forearm and finger-tip skin temperatures and skin-surface temperature gradients (from arm to finger and from calf to toe) measured by the Genius thermometer were compared with those measured by the Mon-a-Therm thermocouple using linear regression and Bland and Altman statistics. Forearm temperature and finger-tip temperature ranged from approximately 31 degrees to approximately 36.5 degrees C (87.8-97.7 degrees F) and approximately 22.5 degrees to approximately 36 degrees C (72.5-96.8 degrees F), respectively. Gradients (from arm to finger and from calf to toe) ranged from approximately -3 degrees to approximately 10 degrees C (26.6-50.0 degrees F) and approximately -3 degrees to approximately 11 degrees C (26.6-51.8 degrees F), respectively. Correlations between the temperatures measured by the Genius thermometer and those by the Mon-a-Therm thermocouple were similar and reliable. The correlation coefficients were as follows: 0.78 at forearm, 0.97 at finger-tip, and 0.97 at skin-surface temperature gradients. The infrared thermometer with a special probe is useful to measure the change of skin-surface temperatures and to evaluate the severity of shock in patients.

The use of infrared ear thermometers in pediatric and family practice offices.

PubMed

Silverman, B G; Daley, W R; Rubin, J D

1998-01-01

To describe the use of infrared (IR) ear thermometers in pediatric and family practice offices. The authors mailed a questionnaire to 350 randomly selected members of the American Academy of Pediatrics and to 355 randomly selected members of the American Academy of Family Physicians. Of respondents in clinical practice, 78% had used IR ear thermometers at least once in the past; 65% of pediatricians and 64% of family practice physicians were current users. Seventeen percent of pediatric offices and 18% of family practice offices that had used IR ear thermometers had discontinued use, most citing inaccuracy or lack of staff trust in the device. Pediatric offices were less likely than family practice offices to use the device in well neonates and sick neonates and more likely to use it in sick children. Advantages cited included rapid readings, ease of use, and accuracy. Seventy-five percent of current users reported at least one problem, including low readings and lack of staff trust. IR ear thermometers are widely used in pediatric and family practice offices. Some offices limit use of these devices to older children and adults, and most of the offices surveyed report using other devices as a check on the accuracy of IR thermometers. Statements by professional organizations that provide user guidelines and establish appropriate age cut-offs would be helpful.

Radiation Requirements and Testing of Cryogenic Thermometers for the Ilc

NASA Astrophysics Data System (ADS)

Barnett, T.; Filippov, Yu. P.; Filippova, E. Yu.; Mokhov, N. V.; Nakao, N.; Klebaner, A. L.; Korenev, S. A.; Theilacker, J. C.; Trenikhina, J.; Vaziri, K.

2008-03-01

Large quantity of cryogenic temperature sensors will be used for operation of the International Linear Collider (ILC). Most of them will be subject to high radiation doses during the accelerator lifetime. Understanding of particle energy spectra, accumulated radiation dose in thermometers and its impact on performance are vital in establishing technical specification of cryogenic thermometry for the ILC. Realistic MARS15 computer simulations were performed to understand the ILC radiation environment. Simulation results were used to establish radiation dose requirements for commercially available cryogenic thermometers. Two types of thermometers, Cernox® and TVO, were calibrated prior to irradiation using different technique. The sensors were subjected then to up to 200 kGy electron beam irradiation with kinetic energy of 5 MeV, a representative of the situation at the ILC operation. A post-irradiation behavior of the sensors was studied. The paper describes the MARS15 model, simulation results, cryogenic test set-up, irradiation tests, and cryogenic test results.

Silicon-based Coulomb blockade thermometer with Schottky barriers

NASA Astrophysics Data System (ADS)

Tuboltsev, V.; Savin, A.; Rogozin, V. D.; Räisänen, J.

2014-04-01

A hybrid Coulomb blockade thermometer (CBT) in form of an array of intermittent aluminum and silicon islands connected in series via tunnel junctions was fabricated on a thin silicon-on-insulator (SOI) film. Tunnel barriers in the micrometer size junctions were formed by metal-semiconductor Schottky contacts between aluminium electrodes and heavily doped silicon. Differential conductance through the array vs. bias voltage was found to exhibit characteristic features of competing thermal and charging effects enabling absolute temperature measurements over the range of ˜65 to ˜500 mK. The CBT performance implying the primary nature of the thermometer demonstrated for rather trivial architecture attempted in this work paves a route for introduction of Coulomb blockade thermometry into well-developed contemporary SOI technology.

Calibration of Radiation Thermometers up to : Effective Emissivity of the Source

NASA Astrophysics Data System (ADS)

Kozlova, O.; Briaudeau, S.; Rongione, L.; Bourson, F.; Guimier, S.; Kosmalski, S.; Sadli, M.

2015-08-01

The growing demand of industry for traceable temperature measurements up to encourages improvement of calibration techniques for industrial-type radiation thermometers in this temperature range. High-temperature fixed points can be used at such high temperatures, but due to the small diameter of apertures of their cavities (3 mm), they are not adapted for the large field-of-views commonly featured by this kind of radiation thermometers. At LNE-Cnam, a Thermo Gauge furnace of 25.4 mm source aperture diameter is used as a comparison source to calibrate customers' instruments against a reference radiation thermometer calibrated according to the ITS-90 with the lowest uncertainties achievable in the Laboratory. But the furnace blackbody radiator exhibits a large temperature gradient that degrades its effective emissivity, and increases the calibration uncertainty due to the lack of information on the working spectral band of the industrial radiation thermometer. In order to estimate the corrections to apply, the temperature distribution (radial and on-axis) of the Thermo Gauge furnace blackbody radiator was characterized and the effective emissivity of the Thermo Gauge cavity was determined by three different methods. Because of this investigation, the corrections due to different fields of view and due to the different spectral bands of the reference pyrometer and the customer's pyrometer were obtained and the uncertainties on these corrections were evaluated.

Towards a practical Johnson noise thermometer for long-term measurements in harsh environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenen, Adam; Pearce, Jonathan; Cruickshank, David

The impact of mechanical and chemical changes in conventional sensors such as thermocouples and resistance thermometers can be avoided by instead using temperature sensors based on fundamental thermometry. A prime example of this is Johnson noise thermometry, which is based on measurement of the fluctuations in the voltage of a resistor arising from thermal motion of charge carriers - i.e. the 'Johnson noise'. A Johnson noise thermometer never needs calibration and is insensitive to the condition of the sensor material. It is therefore ideally suited to long-term temperature measurements in harsh environments, such as nuclear reactor coolant circuits, in-pile measurements,more » nuclear waste management and storage, and severe accident monitoring. There have been a number of previous attempts to develop a Johnson noise thermometer for the nuclear industry, but none have reached commercial exploitation because of technical problems in practical implementation. The main challenge is to extract the tiny Johnson noise signal from ambient electrical noise influences, both from the internal amplification electronics, and from external electrical noise sources. Recent advances in electronics technology and digital signal processing techniques have opened up new possibilities for developing a viable, practical Johnson noise thermometer. We describe a project funded by the UK Technology Strategy Board (now Innovate UK) 'Developing the nuclear supply chain' call, currently underway, to develop a practical Johnson noise thermometer that makes use of innovative electronics for ultralow noise amplification and signal processing. The new electronics technology has the potential to help overcome the problems encountered with previous attempts at constructing a practical Johnson noise thermometer. An outline of the new developments is presented, together with an overview of the current status of the project. (authors)« less

Measurement time and statistics for a noise thermometer with a synthetic-noise reference

NASA Astrophysics Data System (ADS)

White, D. R.; Benz, S. P.; Labenski, J. R.; Nam, S. W.; Qu, J. F.; Rogalla, H.; Tew, W. L.

2008-08-01

This paper describes methods for reducing the statistical uncertainty in measurements made by noise thermometers using digital cross-correlators and, in particular, for thermometers using pseudo-random noise for the reference signal. First, a discrete-frequency expression for the correlation bandwidth for conventional noise thermometers is derived. It is shown how an alternative frequency-domain computation can be used to eliminate the spectral response of the correlator and increase the correlation bandwidth. The corresponding expressions for the uncertainty in the measurement of pseudo-random noise in the presence of uncorrelated thermal noise are then derived. The measurement uncertainty in this case is less than that for true thermal-noise measurements. For pseudo-random sources generating a frequency comb, an additional small reduction in uncertainty is possible, but at the cost of increasing the thermometer's sensitivity to non-linearity errors. A procedure is described for allocating integration times to further reduce the total uncertainty in temperature measurements. Finally, an important systematic error arising from the calculation of ratios of statistical variables is described.

Simulation Studies to Explore Biodegradation in Water-Sediment Systems: From OECD 308 to OECD 309.

PubMed

Shrestha, Prasit; Junker, Thomas; Fenner, Kathrin; Hahn, Stefan; Honti, Mark; Bakkour, Rani; Diaz, Cecilia; Hennecke, Dieter

2016-07-05

Studies according to OECD 308 and OECD 309 are performed to simulate the biodegradation of chemicals in water-sediment systems in support of persistence assessment and exposure modeling. However, several shortcomings of OECD 308 have been identified that hamper data evaluation and interpretation, and its relation to OECD 309 is still unclear. The present study systematically compares OECD 308 and OECD 309 and two variants thereof to derive recommendations on how to experimentally address any shortcomings and improve data for persistence and risk assessment. To this end, four (14)C-labeled compounds with different biodegradation and sorption behavior were tested across standard OECD 308 and 309 test systems and two modified versions thereof. The well-degradable compounds showed slow equilibration and the least mineralization in OECD 308, whereas the modified systems provided the highest degree of mineralization. Different lines of evidence suggest that this was due to increased oxygenation of the sediment in the modified systems. Particularly for rapidly degrading compounds, non-extractable residue formation was in line with degradation and did not follow the sediment-water ratio. For the two more slowly degrading compounds, sorption in OECD 309 (standard and modified) increased with time beyond levels proposed by equilibrium partitioning, which could be attributed to the grinding of the sediment through the stirring of the sediment suspension. Overall, the large differences in degradation observed across the four test systems suggest that refined specifications in test guidelines are required to reduce variability in test outcomes. At the same time, the amount of sediment and its degree of oxygenation emerged as drivers across all test systems. This suggests that a unified description of the systems was possible and would pave the way toward a more consistent consideration of degradation in the water-sediment systems across different exposure situations and

27 CFR 30.22 - Hydrometers and thermometers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Hydrometers and... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS GAUGING MANUAL Gauging Instruments § 30.22 Hydrometers and thermometers. The hydrometers used are graduated to read the proof of aqueous alcoholic solutions at 60 degrees...

High level gamma radiation effects on Cernox™ cryogenic temperature sensors

NASA Astrophysics Data System (ADS)

Courts, S. S.

2017-12-01

Cryogenic temperature sensors are used in high energy particle colliders to monitor the temperatures of superconducting magnets, superconducting RF cavities, and cryogen infrastructure. While not intentional, these components are irradiated by leakage radiation during operation of the collider. A common type of cryogenic thermometer used in these applications is the Cernox™ resistance thermometer (CxRT) manufactured by Lake Shore Cryotronics, Inc. This work examines the radiation-induced calibration offsets on CxRT models CX-1050-SD-HT and CX-1080-SD-HT resulting from exposure to very high levels of gamma radiation. Samples from two different wafers of each of the two models tested were subjected to a gamma radiation dose ranging from 10 kGy to 5 MGy. Data were analysed in terms of the temperature-equivalent resistance change between pre- and post-irradiation calibrations. The data show that the resistance of these devices decreased following irradiation resulting in positive temperature offsets across the 1.4 K to 330 K temperature range. Variations in response were observed between wafers of the same CxRT model. Overall, the offsets increased with increasing temperature and increasing gamma radiation dose. At 1.8 K, the average offset increased from 0 mK to +13 mK as total dose increased from 10 kGy to 5 MGy. At 4.2 K, the average offset increased from +4 mK to +33 mK as total dose increased from 10 kGy to 5 MGy. Equivalent temperature offset data are presented over the 1.4 K to 330 K temperature range by CxRT model, wafer, and total gamma dose.

Calibration and tests of commercial wireless infrared thermometers

USDA-ARS?s Scientific Manuscript database

Applications of infrared thermometers (IRTs) in large agricultural fields require wireless data transmission, and IRT target temperature should have minimal sensitivity to internal detector temperature. To meet these objectives, a prototype wireless IRT system was developed at USDA Agricultural Rese...

Development of a 300 L Calibration Bath for Oceanographic Thermometers

NASA Astrophysics Data System (ADS)

Baba, S.; Yamazawa, K.; Nakano, T.; Saito, I.; Tamba, J.; Wakimoto, T.; Katoh, K.

2017-11-01

The Japan Agency for Marine-Earth Science and Technology (JAMSTEC) has been developing a 300 L calibration bath to calibrate 24 oceanographic thermometers (OT) simultaneously and thereby reduce the calibration work load necessary to service more than 180 OT every year. This study investigated characteristics of the developed 300 L calibration bath using a SBE 3plus thermometer produced by an OT manufacturer. We also used 11 thermistor thermometers that were calibrated to be traceable to the international temperature scale of 1990 (ITS-90) within 1 mK of standard uncertainty through collaboration of JAMSTEC and NMIJ/AIST. Results show that the time stability of temperature of the developed bath was within ± 1 mK. Furthermore, the temperature uniformity was ± 1.3 mK. The expanded uncertainty (k=2) components for the characteristics of the developed 300 L calibration bath were estimated as 2.9 mK, which is much less than the value of 10 mK: the required specification for uncertainty of calibration for the OT. These results demonstrated the utility of this 300 L calibration bath as a device for use with a new calibration system.

Promoting Inclusive Chemistry Teaching by Developing an Accessible Thermometer for Students with Visual Disabilities

ERIC Educational Resources Information Center

Vitoriano, Felipe A.; Teles, Vânia L. G.; Rizzatti, Ivanise M.; Pesssoa de Lima, Régia C.

2016-01-01

This work discusses the construction and evaluation of a digital thermometer especially designed to be operated by people with visual disabilities. The accessibility thermometer can be used as an educational tool in practical activities in classes for sighted and visually impaired students, with the aim of helping those with special needs gain…

New blackbody standard for the evaluation and calibration of tympanic ear thermometers at the NPL, United Kingdom

NASA Astrophysics Data System (ADS)

McEvoy, Helen C.; Simpson, Robert; Machin, Graham

2004-04-01

The use of infrared tympanic thermometers for monitoring patient health is widespread. However, studies into the performance of these thermometers have questioned their accuracy and repeatability. To give users confidence in these devices, and to provide credibility in the measurements, it is necessary for them to be tested using an accredited, standard blackbody source, with a calibration traceable to the International Temperature Scale of 1990 (ITS-90). To address this need the National Physical Laboratory (NPL), UK, has recently set up a primary ear thermometer calibration (PET-C) source for the evaluation and calibration of tympanic (ear) thermometers over the range from 15 °C to 45 °C. The overall uncertainty of the PET-C source is estimated to be +/- 0.04 °C at k = 2. The PET-C source meets the requirements of the European Standard EN 12470-5: 2003 Clinical thermometers. It consists of a high emissivity blackbody cavity immersed in a bath of stirred liquid. The temperature of the blackbody is determined using an ITS-90 calibrated platinum resistance thermometer inserted close to the rear of the cavity. The temperature stability and uniformity of the PET-C source was evaluated and its performance validated. This paper provides a description of the PET-C along with the results of the validation measurements. To further confirm the performance of the PET-C source it was compared to the standard ear thermometer calibration sources of the National Metrology Institute of Japan (NMIJ), Japan and the Physikalisch-Technische Bundesanstalt (PTB), Germany. The results of this comparison will also be briefly discussed. The PET-C source extends the capability for testing ear thermometers offered by the NPL body temperature fixed-point source, described previously. An update on the progress with the commercialisation of the fixed-point source will be given.

Using an Infrared Thermometer for Solar Pyranometry

ERIC Educational Resources Information Center

Fiedler, B. H.

2011-01-01

The simple hand-held infrared thermometer can be used to measure the temperature of surfaces of different reflectivity exposed to sunlight and wind. From four temperature measurements of black and white panels in windy and wind-sheltered conditions, together with the two wind speed measurements, both the flux of incident solar radiation and the…

OECD in Figures, 2008

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2008

2008-01-01

"OECD in Figures" is a primary statistical source for key data on OECD countries, ranging from economic growth and employment to inflation, trade and environment. Information is presented in tabular form for: (1) Demography and Health; (2) Economy; (3) Energy; (4) Labour; (5) Science and Technology; (6) Environment; (7) Education; (8)…

OECD Reviews of School Resources: Czech Republic 2016. OECD Reviews of School Resources

ERIC Educational Resources Information Center

Shewbridge, Claire; Herczynski, Jan; Radinger, Thomas; Sonnemann, Julie

2016-01-01

The effective use of school resources is a policy priority across OECD countries. The "OECD Reviews of School Resources" explore how resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. The series considers four types of resources: financial resources, such as…

Development of a sapphire fiber thermometer using two wavelength bands

NASA Astrophysics Data System (ADS)

Ye, Linhua; Shen, Yonghang

1996-09-01

This paper reports the development of a sapphire ((alpha) - Al2O3) single crystal optical fiber thermometer using two wavelength bands. A thin film of precious metal or ceramic deposited onto one end of the sapphire fiber forms a mini-radiation cavity. The other end of the sapphire fiber is coupled to a low-loss silica fiber. Radiation from the small cavity is transmitted along the silica fiber into a photodetection system which consists of a lens, beam splitter, two interference filters (820 nm and 940 nm center wavelength, 30 nm bandwidth) and two silicon photocells. The temperature measurement is based on the detection of radiation from the small cavity. The sapphire fiber (0.25 - 1.0 mm diameter, 100 - 450 mm length) was grown by the laser heated pedestal growth (LHPG) methods. Transmission loss in the sapphire fiber was experimentally measured. Theoretical analysis shows the apparent emittance of the small cavity with a length to diameter (L/D) ratio greater than eight is a constant value near to one, so the small cavity can be considered as a small black-body cavity. Using the developed sapphire fiber temperature sensor, we have built a sapphire fiber thermometer based on a 8098 single-chip microcomputer system. It was calibrated at some known stable temperature point and uses the fundamental radiation law to extrapolate to other temperatures. By taking the ratio of the optical power at two wavelengths, errors due to changes in the system, such as emissivity and transmission losses, can be canceled out. The thermometer has an operating temperature range of 800 to 1900 degrees Celsius, and an accuracy of 0.2% at 1000 degrees Celsius. There are a number of applications of the thermometer both in science and industry.

Development of an Inductively Coupled Thermometer for a Cryogenic Half-Wave Plate

NASA Astrophysics Data System (ADS)

Madurowicz, Alexander; Kusaka, Akito

2017-01-01

The current state of Cosmic Microwave Background (CMB) research has focused much attention on the measurement of polarization. In an effort to modulate the CMB polarization while also minimizing photon noise due to thermal emission, we are developing a sapphire half-wave plate (HWP) cooled to 50 K rotating at 2 Hz on a superconducting magnetic levitating bearing. In order to measure the temperature of the rotor without making physical contact, we designed an inductively coupled cryogenic thermometer. The complex impedance of the circuit has a resonant peak when driven around 1 MHz. The width of this resonance is dependent on the value of the resistor, which varies with temperature and functions as a thermometer once calibrated. In this talk, we will present results from stationary measurements of this impedance and discuss the temperature accuracy of this thermometer, as well as a preliminary circuit design to measure this impedance during the HWP rotation.

Education Today 2013: The OECD Perspective

ERIC Educational Resources Information Center

OECD Publishing (NJ3), 2012

2012-01-01

What does the OECD have to say about the state of education today? What are the main OECD messages on early childhood education, teacher policies and tertiary education? What about student performance, educational spending and equity in education? OECD work on these important education topics and others have been brought together in a single…

Measuring Total Column Water Vapor by Pointing an Infrared Thermometer at the Sky

NASA Technical Reports Server (NTRS)

Mims, Forrest M., III; Chambers, Lin H.; Brooks, David R.

2011-01-01

A 2-year study affirms that the temperature (Tz) indicated by an inexpensive ($20 to $60) IR thermometer pointed at the cloud-free zenith sky provides an approximate indication of the total column water vapor (precipitable water or PW). PW was measured by a MICROTOPS II sun photometer. The coefficient of correlation (r2) of the PW and Tz was 0.90, and the rms difference was 3.2 mm. A comparison of the Tz data with the PW provided by a GPS site 31 km NNE yielded an r2 of 0.79, and an rms difference of 5.8 mm. An expanded study compared Tz from eight IR thermometers with PW at various times during the day and night from 17 May to 18 October 2010, mainly at the Texas site and 10 days at Hawaii's Mauna Loa Observatory (MLO). The best results of this comparison were provided by two IR thermometers models that yielded an r2 of 0.96 and an rms difference with the PW of 2.7 mm. The results of both the ongoing 2-year study and the 5-month instrument comparison show that IR thermometers can measure PW with an accuracy (rms difference/mean PW) approaching 10%, the accuracy typically ascribed to sun photometers.

Preliminary Results of a New Type of Non-Hazardous Liquid-Filled Precision Glass Thermometer

NASA Astrophysics Data System (ADS)

Miller, Charles J.; Emory, Deanne Miller

2003-09-01

Miller & Weber, Inc. has developed several liquids that, when used properly, will perform as mercury in a liquid-in-glass thermometer. These liquids are non-hazardous per OSHA standards, non-toxic per EPA standards and biodegradable. This paper discusses the research, development and testing accomplished before bringing the finished thermometers, marketed under the brand name PerformaTherm®, to market.

21 CFR 880.2900 - Clinical color change thermometer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Clinical color change thermometer. 880.2900 Section 880.2900 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use...

21 CFR 880.2900 - Clinical color change thermometer.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Clinical color change thermometer. 880.2900 Section 880.2900 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use...

21 CFR 880.2900 - Clinical color change thermometer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Clinical color change thermometer. 880.2900 Section 880.2900 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use...

21 CFR 880.2900 - Clinical color change thermometer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Clinical color change thermometer. 880.2900 Section 880.2900 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use...

Intestinal obstruction due to migration of a thermometer from bladder to abdominal cavity: a case report.

PubMed

Nie, Jing; Zhang, Bo; Duan, Yan-Chao; Hu, Yue-Hua; Gao, Xin-Ying; Gong, Jian; Cheng, Ming; Li, Yan-Qing

2014-03-07

Intraperitoneal foreign bodies such as retained surgical instruments can cause intestinal obstruction. However, intestinal obstruction due to transmural migration of foreign bodies has rarely been reported. Here, we report a case of intestinal obstruction due to a clinical thermometer which migrated from the bladder into the abdominal cavity. A 45-year-old man was admitted to our hospital with a one-year history of recurrent lower abdominal cramps. Two days before admission, the abdominal cramps aggravated. Intestinal obstruction was confirmed with upright abdominal radiography and computerized tomography scan which showed dilation of the small intestines and a thermometer in the abdominal cavity. Then laparotomy was performed. A scar was observed at the fundus of the bladder and a thermometer was adhering to the small bowels and mesentery which resulted in intestinal obstruction. Abdominal cramps were eliminated and defecation and flatus recovered soon after removal of the thermometer.

Compact and low-cost fiber optic thermometer

NASA Astrophysics Data System (ADS)

Sun, Mei H.

1997-06-01

Commercial fiberoptic thermometers have been available for a number of years. The early products were unreliable and high in price. However, the continuing effort in the development of new sensing techniques along with the breakthroughs made in many areas of optoelectronics in recent years have made the production of cost competitive and reliable systems feasible. A fluorescence decay time based system has been demonstrated to successfully meet both cost and performance requirements for various medical applications. A very critical element to the success of this low cost and compact fiberoptic thermometer is the fluorescent sensor material. The very high quantum efficiency, the operating wavelengths, and the temperature sensitivity helped significantly in simplifying the design requirements for the optics and the electronics. The one to eight channel unit contains one to eight modules of a simple optical assembly: an LED light source, a small lens, and a filter are housed in an injection molded plastic container. Both the electronics and the optics reside on a small printed circuit board of approximately 6 inches by 3 inches. This system can be packaged as a stand alone unit or embedded in original manufacturer equipment.

APMP Scale Comparison with Three Radiation Thermometers and Six Fixed-Point Blackbodies

NASA Astrophysics Data System (ADS)

Yamada, Y.; Shimizu, Y.; Ishii, J.

2015-08-01

New Asia Pacific Metrology Programme (APMP) comparisons of radiation thermometry standards, APMP TS-11, and -12, have recently been initiated. These new APMP comparisons cover the temperature range from to . Three radiation thermometers with central wavelengths of 1.6 , 0.9 , and 0.65 are the transfer devices for the radiation thermometer scale comparison conducted in the so-called star configuration. In parallel, a compact fixed-point blackbody furnace that houses six types of fixed-point cells of In, Sn, Zn, Al, Ag, and Cu is circulated, again in a star-type comparison, to substantiate fixed-point calibration capabilities. Twelve APMP national metrology institutes are taking part in this endeavor, in which the National Metrology Institute of Japan acts as the pilot. In this article, the comparison scheme is described with emphasis on the features of the transfer devices, i.e., the radiation thermometers and the fixed-point blackbodies. Results of preliminary evaluations of the performance and characteristic of these instruments as well as the evaluation method of the comparison results are presented.

RuO2 Thermometer for Ultra-Low Temperatures

NASA Technical Reports Server (NTRS)

Hait, Thomas; Shirron, Peter J.; DiPirro, Michael

2009-01-01

A small, high-resolution, low-power thermometer has been developed for use in ultra-low temperatures that uses multiple RuO2 chip resistors. The use of commercially available thick-film RuO2 chip resistors for measuring cryogenic temperatures is well known due to their low cost, long-term stability, and large resistance change.

Evaluation of Small-Sized Platinum Resistance Thermometers with ITS-90 Characteristics

NASA Astrophysics Data System (ADS)

Yamazawa, K.; Anso, K.; Widiatmo, J. V.; Tamba, J.; Arai, M.

2011-12-01

Many platinum resistance thermometers (PRTs) are applied for high precision temperature measurements in industry. Most of the applications use PRTs that follow the industrial standard of PRTs, IEC 60751. However, recently, some applications, such as measurements of the temperature distribution within equipments, require a more precise temperature scale at the 0.01 °C level. In this article the evaluation of remarkably small-sized PRTs that have temperature-resistance characteristics very close to that of standard PRTs of the International Temperature Scale of 1990 (ITS-90) is reported. Two types of the sensing element were tested, one is 1.2 mm in diameter and 10 mm long, the other is 0.8 mm and 8 mm. The resistance of the sensor is 100 Ω at the triple-point-of-water temperature. The resistance ratio at the Ga melting-point temperature of the sensing elements exceeds 1.11807. To verify the closeness of the temperature-resistance characteristics, comparison measurements up to 157 °C were employed. A pressure-controlled water heat-pipe furnace was used for the comparison measurement. Characteristics of 19 thermometers with these small-sized sensing elements were evaluated. The deviation from the temperature measured using a standard PRT used as a reference thermometer in the comparison was remarkably small, when we apply the same interpolating function for the ITS-90 sub-range to these small thermometers. Results including the stability of the PRTs and the uncertainty evaluation of the comparison measurements, and the comparison results showing the small deviation from the ITS-90 temperature-resistance characteristics are reported. The development of such a PRT might be a good solution for applications such as temperature measurements of small objects or temperature distribution measurements that need the ITS-90 temperature scale.

Optimization of the R-SQUID noise thermometer

NASA Astrophysics Data System (ADS)

Seppä, Heikki

1986-02-01

The Josephson junction can be used to convert voltage into frequency and thus it can be used to convert voltage fluctuations generated by Johnson noise in a resistor into frequency fluctuations. As a consequence, the temperature of the resistor can be defined by measuring the variance of the frequency fluctuations. Unfortunately, the absolute determination of temperature by this approach is disturbed by several undesirable effects: a rolloff introduced by the bandwidth of the postdetection filter, additional noise caused by rf amplifiers, and a mixed noise effect caused by the nonlinearity of the Josephson junction together with rf noise in the tank circuit. Furthermore, the variance is a statistical quantity and therefore the limited number of frequency counts produces inaccuracy in a temperature measurement. In this work the total inaccuracy of the noise thermometer is analyzed and the optimal choice of the parameters is derived. A practical way to find the optimal conditions for the Josephson junction noise thermometer is discussed. The inspection shows that under the optimal conditions the total error is dependent only on the temperature under determination, the equivalent noise temperature of the preamplifier, the bias frequency of the SQUID, and the total time used for the measurement.

OECD Educationtoday Crisis Survey 2010: The Impact of the Economic Recession and Fiscal Crisis on Education in OECD Countries. OECD Education Working Papers, No. 56

ERIC Educational Resources Information Center

Damme, Dirk V.; Karkkainen, Kiira

2011-01-01

The Organisation for Economic Cooperation and Development (OECD) Directorate for Education surveyed the impact of the economic recession on education for the first time in June 2009. Responses were received from seventeen OECD member countries, the Flemish Community of Belgian and two Canadian provinces. The results of the survey reflect the…

Electronic Thermometer Readings

NASA Technical Reports Server (NTRS)

2001-01-01

NASA Stennis' adaptive predictive algorithm for electronic thermometers uses sample readings during the initial rise in temperature and applies an algorithm that accurately and rapidly predicts the steady state temperature. The final steady state temperature of an object can be calculated based on the second-order logarithm of the temperature signals acquired by the sensor and predetermined variables from the sensor characteristics. These variables are calculated during tests of the sensor. Once the variables are determined, relatively little data acquisition and data processing time by the algorithm is required to provide a near-accurate approximation of the final temperature. This reduces the delay in the steady state response time of a temperature sensor. This advanced algorithm can be implemented in existing software or hardware with an erasable programmable read-only memory (EPROM). The capability for easy integration eliminates the expense of developing a whole new system that offers the benefits provided by NASA Stennis' technology.

Structure and mechanism of a molecular rheostat, an RNA thermometer that modulates immune evasion by Neisseria meningitidis

PubMed Central

Barnwal, Ravi Pratap; Loh, Edmund; Godin, Katherine S.; Yip, Jordan; Lavender, Hayley; Tang, Christoph M.; Varani, Gabriele

2016-01-01

Neisseria meningitidis causes bacterial meningitis and septicemia. It evades the host complement system by upregulating expression of immune evasion factors in response to changes in temperature. RNA thermometers within mRNAs control expression of bacterial immune evasion factors, including CssA, in the 5′-untranslated region of the operon for capsule biosynthesis. We dissect the molecular mechanisms of thermoregulation and report the structure of the CssA thermometer. We show that the RNA thermometer acts as a rheostat, whose stability is optimized to respond in a small temperature range around 37°C as occur within the upper airways during infection. Small increases in temperature gradually open up the structure to allow progressively increased access to the ribosome binding site. Even small changes in stability induced by mutations of imperfect base pairs, as in naturally occurring polymorphisms, shift the thermometer response outside of the desired temperature range, suggesting that its activity could be modulated by pharmacological intervention. PMID:27369378

Resistance thermometer has linear resistance-temperature coefficient at low temperatures

NASA Technical Reports Server (NTRS)

Kuzyk, W.

1966-01-01

Resistance thermometer incorporating a germanium resistance element with a platinum resistance element in a wheatstone bridge circuit has a linear temperature-resistance coefficient over a range from approximately minus 140 deg C to approximately minus 253 deg C.

Electrical and Infrared Optical Properties of Vanadium Oxide Semiconducting Thin-Film Thermometers

NASA Astrophysics Data System (ADS)

Zia, Muhammad Fakhar; Abdel-Rahman, Mohamed; Alduraibi, Mohammad; Ilahi, Bouraoui; Awad, Ehab; Majzoub, Sohaib

2017-10-01

A synthesis method has been developed for preparation of vanadium oxide thermometer thin film for microbolometer application. The structure presented is a 95-nm thin film prepared by sputter-depositing nine alternating multilayer thin films of vanadium pentoxide (V2O5) with thickness of 15 nm and vanadium with thickness of 5 nm followed by postdeposition annealing at 300°C in nitrogen (N2) and oxygen (O2) atmospheres. The resulting vanadium oxide (V x O y ) thermometer thin films exhibited temperature coefficient of resistance (TCR) of -3.55%/°C with room-temperature resistivity of 2.68 Ω cm for structures annealed in N2 atmosphere, and TCR of -3.06%/°C with room-temperature resistivity of 0.84 Ω cm for structures annealed in O2 atmosphere. Furthermore, optical measurements of N2- and O2-annealed samples were performed by Fourier-transform infrared ellipsometry to determine their dispersion curves, refractive index ( n), and extinction coefficient ( k) at wavelength from 7000 nm to 14,000 nm. The results indicate the possibility of applying the developed materials in thermometers for microbolometers.

Integration of Immigrants in OECD Countries: Do Policies Matter? OECD Economics Department Working Papers, No. 564

ERIC Educational Resources Information Center

Causa, Orsetta; Jean, Sebastien

2007-01-01

This working paper assesses the ease of immigrants' integration in OECD labour markets by estimating how an immigration background influences the probability of being active or employed and the expected hourly earnings, for given individual characteristics. Applying the same methodology to comparable data across twelve OECD countries, immigrants…

Ratiometric near infrared luminescent thermometer based on lanthanide metal-organic frameworks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue, Dan; Zhang, Jun; Zhao, Dian

2016-09-15

A near infrared luminescent MOFs thermometer (Nd{sub 0.676}Yb{sub 0.324}BTC) was prepared via a simple solvothermal method using Ln{sup 3+} (Ln=Nd, Yb) ions and 1, 3, 5-benznenetricarboxylic acid (H{sub 3}BTC), and characterized by PXRD, TGA, ICP, and photoluminescence (PL) spectrum. These results indicate that the Nd{sub 0.676}Yb{sub 0.324}BTC displays high relative sensitivity and excellent repeatability in the physiological temperature range (288–323 K), and the maximum relative sensitivity is determined to be 1.187% K{sup −1} at 323 K. These NIR luminescent MOFs may have potential applications in physiological temperature sensing. - Graphical abstract: A near infrared luminescent MOFs thermometer (Nd{sub 0.054}Yb{sub 0.946}BTCmore » ) displays high relative sensitivity and excellent repeatability in the physiological temperature range (288–323 K). Display Omitted - Highlights: • A ratiometric near infrared luminescent MOFs thermometer (Nd{sub 0.676}Yb{sub 0.324}BTC) was prepared via a simple solvothermal method. • The maximum relative sensitivity of Nd{sub 0.676}Yb{sub 0.324}BTC is determined to be 1.187% K{sup −1} at 323 K. • Nd{sub 0.676}Yb{sub 0.324}BTC showed excellent repeatability in the physiological temperature range (288–323 K).« less

27 CFR 30.22 - Hydrometers and thermometers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 105 to 125 0.2° N 125 to 145 0.2° P 145 to 165 0.2° Q 165 to 185 0.2° R 185 to 206 0.2° Thermometers are designated by type according to range of degrees Fahrenheit and are provided in ranges and subdivisions of degrees as follows: Type Range Subdivision Pencil type 10° to 100° 1° V-back 10° to 100° 1...

Ingestible Thermometer Pill Aids Athletes in Beating the Heat

NASA Technical Reports Server (NTRS)

2006-01-01

Developed by Goddard Space Flight Center and the Johns Hopkins University Applied Physics Laboratory to monitor the core body temperature of astronauts during space flight, the ingestible "thermometer pill" has a silicone-coated exterior, with a microbattery, a quartz crystal temperature sensor, a space-aged telemetry system, and microminiaturized circuitry on the interior.

Corrections on the Thermometer Reading in an Air Stream

NASA Technical Reports Server (NTRS)

Van Der Maas, H J; Wynia, S

1940-01-01

A method is described for checking a correction formula, based partly on theoretical considerations, for adiabatic compression and friction in flight tests and determining the value of the constant. It is necessary to apply a threefold correction to each thermometer reading. They are a correction for adiabatic compression, friction and for time lag.

The OECD expert meeting on ecotoxicology and environmental fate--towards the development of improved OECD guidelines for the testing of nanomaterials.

PubMed

Kühnel, Dana; Nickel, Carmen

2014-02-15

On behalf of the OECD Working Party on Manufactured Nanomaterials (WPMN) an expert meeting on ecotoxicology and environmental fate of nanomaterials (NMs) took place in January 2013 in Berlin. At this meeting experts from science, industry and regulatory bodies discussed the applicability of OECD test guidelines (TGs) for chemicals to nanomaterials. The objective was to discuss the current state of the relevant science and provide recommendations to the OECD WPMN on (1) the need for updating current OECD TGs and the need for developing new ones specific to nanomaterials; and (2) guidance needed for the appropriate and valid testing of environmental fate and ecotoxicity endpoints for NMs. Experts at the workshop agreed that the majority of the OECD TG for chemicals were generally applicable for the testing of NM, with the exception of TG 105 (water solubility) and 106 (adsorption-desorption). Additionally, the workshop also highlighted considerations when conducting OECD chemical TG on nanomaterials (e.g., sample preparation, dispersion, analysis, dosimetry and characterisation). These considerations will lead to the future development of proposals for new TG and guidance documents (GDs) to ensure that OECD TG give meaningful, repeatable, and accurate results when used for nanomaterials. This report provides a short overview of topics discussed during the meeting and the main outcomes. A more detailed report of the workshop will become available through the OECD, however, due to the urgency of having OECD TG relevant for nanomaterials, this brief report is being shared with the scientific community through this communication. Copyright © 2013. Published by Elsevier B.V.

Health Expenditure Trends in OECD Countries, 1990-2001

PubMed Central

Huber, Manfred; Orosz, Eva

2003-01-01

This article presents data on health care spending for 30 OECD countries from OECD Health Data 2003, the latest edition of OECD's annual data collection on health systems across industrialized countries. OECD data show health care expenditures as a proportion of gross domestic product at an all-time high, due to both increased expenditures and overall economic slowdown. The article discusses similarities and differences across countries in how health care expenditures are funded and how the health care dollar is spent among types of services. PMID:14997690

The gallium melting-point standard: its role in manufacture and quality control of electronic thermometers for the clinical laboratory.

PubMed

Sostman, H E

1977-01-01

I discuss the traceability of calibration of electronic thermometers to thermometric constants of nature or to the National Bureau of Standards, form a manufacturer's basic standards through the manufacturing process to the user's laboratory. Useful electrical temperature sensors, their advantages, and means for resolving their disadvantages are described. I summarize our development of a cell for realizing the melting phase equilibrium of pure gallium (at 29.770 degrees C) as a thermometer calibration fixed point, and enumerate its advantages in the routine calibration verification of electrical thermometers in the clinical chemistry laboratory.

Time-lapse and slow-motion tracking of temperature changes: response time of a thermometer

NASA Astrophysics Data System (ADS)

Moggio, L.; Onorato, P.; Gratton, L. M.; Oss, S.

2017-03-01

We propose the use of a smartphone based time-lapse and slow-motion video techniques together with tracking analysis as valuable tools for investigating thermal processes such as the response time of a thermometer. The two simple experimental activities presented here, suitable also for high school and undergraduate students, allow one to measure in a simple yet rigorous way the response time of an alcohol thermometer and show its critical dependence on the properties of the surrounding environment giving insight into instrument characteristics, heat transfer and thermal equilibrium concepts.

The OECD Fish Testing Framework Project

EPA Science Inventory

OECD Project 2.30 on a Fish Testing Framework was initiated in mid-2009, with the United States as the lead country. The objectives of the project are to review the regulatory needs and data requirements for fish testing and review the currency of existing OECD Test Guidelines. ...

Genetically encoded ratiometric fluorescent thermometer with wide range and rapid response

PubMed Central

Nakano, Masahiro; Arai, Yoshiyuki; Kotera, Ippei; Okabe, Kohki; Kamei, Yasuhiro; Nagai, Takeharu

2017-01-01

Temperature is a fundamental physical parameter that plays an important role in biological reactions and events. Although thermometers developed previously have been used to investigate several important phenomena, such as heterogeneous temperature distribution in a single living cell and heat generation in mitochondria, the development of a thermometer with a sensitivity over a wide temperature range and rapid response is still desired to quantify temperature change in not only homeotherms but also poikilotherms from the cellular level to in vivo. To overcome the weaknesses of the conventional thermometers, such as a limitation of applicable species and a low temporal resolution, owing to the narrow temperature range of sensitivity and the thermometry method, respectively, we developed a genetically encoded ratiometric fluorescent temperature indicator, gTEMP, by using two fluorescent proteins with different temperature sensitivities. Our thermometric method enabled a fast tracking of the temperature change with a time resolution of 50 ms. We used this method to observe the spatiotemporal temperature change between the cytoplasm and nucleus in cells, and quantified thermogenesis from the mitochondria matrix in a single living cell after stimulation with carbonyl cyanide 4-(trifluoromethoxy)phenylhydrazone, which was an uncoupler of oxidative phosphorylation. Moreover, exploiting the wide temperature range of sensitivity from 5°C to 50°C of gTEMP, we monitored the temperature in a living medaka embryo for 15 hours and showed the feasibility of in vivo thermometry in various living species. PMID:28212432

Characteristics of a liquid-helium-free calibration apparatus for cryogenic thermometers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shimazaki, T.

2013-09-11

Closed-cycle Joule-Thomson (JT) cryocoolers have been developed at National Metrology Institute of Japan (NMIJ)/National Institute of Advanced Industrial Science and Technology (AIST) with the aim of realizing a liquid-helium-free calibration apparatus for cryogenic thermometers between 0.65 K and 25 K. The latest JT cryocooler at NMIJ/AIST consists of a {sup 3}He JT cooling circuit and a pulse tube mechanical refrigerator. The characteristics of the apparatus including a residual gas analysis of the JT cooling circuit are presented in this paper. Currently the initial cool-down is performed using a heat-exchange gas. It normally takes about 30 h to reduce the temperaturemore » from room temperature to 5 K at the thermometer comparison block of the apparatus. The correct timing of the removal of the heatexchange gas is important for the efficient operation of the apparatus. Incomplete removal of the heat-exchange gas induces excess heat load on the apparatus and thermal disturbances. Some examples of abrupt temperature bursts are discussed in this paper. Mechanical refrigerators generate cyclic mechanical vibrations, and precision resistance thermometers are usually very sensitive to a mechanical vibration. The measured vibration level of the developed apparatus is reported. The damage to the apparatus due to the magnitude 9.0 earthquake on March 11, 2011, and possible countermeasures in the case of future earthquakes are also discussed.« less

Evaluation of a Teaching Kit for Family and Consumer Science Classrooms: Motivating Students to Use a Food Thermometer with Small Cuts of Meat

ERIC Educational Resources Information Center

Edwards, Zena; Edlefsen, Miriam; Hillers, Virginia; McCurdy, Sandra M.

2005-01-01

The U.S. Dept. of Agriculture recommends use of food thermometers to safely cook small cuts of meat, yet most consumers do not use them. Consumers lack knowledge about how and why to use food thermometers with small cuts of meat. Opportunities exist for family and consumer science classes to provide education about thermometers to adolescents, who…

School Evaluation: Current Practices in OECD Countries and a Literature Review. OECD Education Working Papers, No. 42

ERIC Educational Resources Information Center

Faubert, Violaine

2009-01-01

This paper examines the current academic and policy literatures concerning school evaluation in primary and secondary education within the OECD countries. First, it provides a typology of the existing systems of school evaluation across the OECD. It encompasses the diverse criteria and instruments commonly used to carry out schools evaluation, as…

OECD Reviews of School Resources: Kazakhstan

ERIC Educational Resources Information Center

Pons, Anna; Amoroso, Jeremie; Herczynski, Jan; Kheyfets, Igor; Lockheed, Marlaine; Santiago, Paulo

2015-01-01

This joint OECD-World Bank report for Kazakhstan forms part of the OECD Review of Policies to Improve the Effectiveness of Resource Use in Schools. The purpose of the Review is to explore how resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. School resources are…

Health Expenditure Trends in OECD Countries, 1970-1997

PubMed Central

Huber, Manfred

1999-01-01

This article provides an overview of current trends in health expenditures in 29 OECD countries and recent revisions of OECD health accounts. U.S. health expenditures are compared with those of other OECD countries. The interactions of cost-containment measures with changes in the public-private mix of financing and in the composition of health care spending are discussed. PMID:11481789

Preliminary Results on New Prototypes of Precision Rh-0.5at%Fe Resistance Thermometers of Chinese Production

NASA Astrophysics Data System (ADS)

Pavese, F.; Szmyrka-Grzebyk, A.; Lipinski, L.; Manuszkiewicz, H.; Qiu, Ping; Zhang, Jin Tao; Lin, Peng; Li, Xing Wei

2008-02-01

Given the practical impossibility of obtaining new precision Rh-0.5at%Fe resistance thermometers in recent years, the possible re-starting of the production of such thermometers in Yunnan (China) was explored by Istituto Nazionale di Ricerca Metrologica (INRIM). Ten prototypes of the new production were made available in early 2006. The paper reports the preliminary data from the testing performed to date on these prototypes at National Institute of Metrology (NIM) and Instytut Niskich Temperatur i Badan Strukturalnych (INTiBS). Although a problem with the alloy composition was detected, the reproducibility results on thermal cycling are very encouraging. Resistance-temperature ( R- T) characteristics below 30 K, though not identical with those of similar thermometers formerly available from Tinsley and VNIIFTRI, are still suitable for accurate metrology.

Thermodynamics and historical relevance of a jetting thermometer made of Chinese zisha ceramic

NASA Astrophysics Data System (ADS)

Lee, Vincent; Attinger, Daniel

2016-07-01

Following a recent trend of scientific studies on artwork, we study here the thermodynamics of a thermometer made of zisha ceramic, related to the Chinese tea culture. The thermometer represents a boy who “urinates” shortly after hot water is poured onto his head. Long jetting distance is said to indicate that the water temperature is hot enough to brew tea. Here, a thermodynamic model describes the jetting phenomenon of that pee-pee boy. The study demonstrates how thermal expansion of an interior air pocket causes jetting. A thermodynamic potential is shown to define maximum jetting velocity. Seven optimization criteria to maximize jetting distance are provided, including two dimensionless numbers. Predicted jetting distances, jet durations, and temperatures agree very well with infrared and optical measurements. Specifically, the study confirms that jetting distances are sensitive enough to measure water temperature in the context of tea brewing. Optimization results show that longer jets are produced by large individuals, with low body mass index, with a boyhood of medium size inclined at an angle π/4. The study ends by considering the possibility that ceramic jetting artifacts like the pee-pee boy might have been the first thermometers known to mankind, before Galileo Galilei’s thermoscope.

Thermodynamics and historical relevance of a jetting thermometer made of Chinese zisha ceramic

PubMed Central

Lee, Vincent; Attinger, Daniel

2016-01-01

Following a recent trend of scientific studies on artwork, we study here the thermodynamics of a thermometer made of zisha ceramic, related to the Chinese tea culture. The thermometer represents a boy who “urinates” shortly after hot water is poured onto his head. Long jetting distance is said to indicate that the water temperature is hot enough to brew tea. Here, a thermodynamic model describes the jetting phenomenon of that pee-pee boy. The study demonstrates how thermal expansion of an interior air pocket causes jetting. A thermodynamic potential is shown to define maximum jetting velocity. Seven optimization criteria to maximize jetting distance are provided, including two dimensionless numbers. Predicted jetting distances, jet durations, and temperatures agree very well with infrared and optical measurements. Specifically, the study confirms that jetting distances are sensitive enough to measure water temperature in the context of tea brewing. Optimization results show that longer jets are produced by large individuals, with low body mass index, with a boyhood of medium size inclined at an angle π/4. The study ends by considering the possibility that ceramic jetting artifacts like the pee-pee boy might have been the first thermometers known to mankind, before Galileo Galilei’s thermoscope. PMID:27431925

Input Correlations for Irradiation Creep of FeCrAl and SiC Based on In-Pile Halden Test Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terrani, K. A.; Karlsen, T. M.; Yamamoto, Yukinori

2016-05-01

Swelling and creep behavior of wrought FeCrAl alloys and CVD-SiC, two candidate accident tolerant fuel cladding materials, are being examined using in-pile tests at the Halden reactor. The outcome of these tests are material property correlations that are inputs into fuel performance analysis tools. The results are discussed and compared with what is available in literature from irradiation experiments in other reactors or out-of-pile tests. Specific recommendation on what correlations should be used for swelling, thermal, and irradiation creep for each material are provided in this document.

Evaluation of platinum resistance thermometers

NASA Technical Reports Server (NTRS)

Daryabeigi, Kamran; Dillon-Townes, Lawrence A.

1988-01-01

An evaluation procedure for the characterization of industrial platinum resistance thermometers (PRTs) for use in the temperature range -120 to 160 C was investigated. This evaluation procedure consisted of calibration, thermal stability and hysteresis testing of four surface measuring PRTs. Five different calibration schemes were investigated for these sensors. The IPTS-68 formulation produced the most accurate result, yielding average sensor systematic error of 0.02 C and random error of 0.1 C. The sensors were checked for thermal stability by successive and thermal cycling between room temperature, 160 C, and boiling point of nitrogen. All the PRTs suffered from instability and hysteresis. The applicability of the self-heating technique as an in situ method for checking the calibration of PRTs located inside wind tunnels was investigated.

Development of a Standard Platinum Resistance Thermometer for Use up to the Copper Point

NASA Astrophysics Data System (ADS)

Tavener, J. P.

2015-08-01

The international temperature scale of 1990 defines temperatures in the range from 13.8 K to 1234.93 K () using a standard platinum resistance thermometer (SPRT) as an interpolating instrument. For temperatures above , the current designs of an SPRT require extreme care to avoid contamination, especially by metallic impurities, which can cause rapid and irreversible drift. This study investigates the performance of a new design of a high-temperature SPRT with the aim of improving the stability of the SPRTs and extending their temperature range. The prototype SPRTs have an alumina sheath, a sapphire support for the sensing element, which are aspirated with dry air and operated with a dc bias voltage to suppress the diffusion of metal-ion contaminants. Three prototype thermometers were exposed to temperatures near or above the copper freezing point, , for total exposure times in excess of 500 h and exhibited drifts in the triple-point resistance of less than 10 mK. The new design eliminates some of the problems associated with fused-silica sheaths and sensor-support structures and is a viable option for a high-accuracy thermometer for temperatures approaching.

Evaluation of the Use of Optical Fiber Thermometers for Thermal Control of the Quench Module Insert

NASA Technical Reports Server (NTRS)

Jones, Matthew R.; Farmer, Jeffrey T.; Breeding, Shawn P.

2001-01-01

Issues regarding the use of optical fiber thermometers to control heater settings in a microgravity vacuum furnace are addressed. It is desirable to use these probes in environments such as the International Space Station, because they can be operated without re-calibration for extended periods. However, the analysis presented in this paper shows that temperature readings obtained using optical fiber thermometers can be corrupted by emissions from the fiber when extended portions of the probe are exposed to elevated temperatures.

Evaluation of the Use of Optical Fiber Thermometers for Thermal Control of the Quench Module Insert

NASA Technical Reports Server (NTRS)

Jones, Matthew R.; Farmer, Jeffrey T.; Breeding, Shawn P.

1999-01-01

Issues regarding the use of optical fiber thermometers to control heater settings in a microgravity vacuum furnace are addressed. It is desirable to use these probes in environments such as the International Space Station, because they can be operated without re-calibration for extended periods. However, the analysis presented in this paper shows that temperature readings obtained using optical fiber thermometers are corrupted due to emissions from the fiber when extended portions of the probe are exposed to elevated temperatures.

Room temperature, very sensitive thermometer using a doubly clamped microelectromechanical beam resonator for bolometer applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Y., E-mail: zhangya@iis.u-tokyo.ac.jp; Watanabe, Y.; Hosono, S.

We propose a room temperature, all electrical driving and detecting, very sensitive thermometer structure using a microelectromechanical (MEMS) resonator for bolometer applications. We have fabricated a GaAs doubly clamped MEMS beam resonator whose oscillation can be excited and detected by the piezoelectric effect. When a heating power is applied to a NiCr film deposited on the MEMS beam surface, internal thermal stress is generated in the beam, leading to a reduction in the resonance frequency. The present device detects the shift in the resonance frequency caused by heating and works as a very sensitive thermometer. When the resonator was drivenmore » by a voltage slightly below the threshold for the nonlinear, hysteretic oscillation, the thermometer showed a voltage responsivity of about 3300 V/W, while keeping a low noise spectral density of about 60 nV/Hz{sup 1/2}, demonstrating a noise equivalent power of <20 pW/Hz{sup 1/2} even at room temperature. The observed effect can be used for realizing high-sensitivity terahertz bolometers for room-temperature operation.« less

Evaluation of structural and thermophysical effects on the measurement accuracy of deep body thermometers based on dual-heat-flux method.

PubMed

Huang, Ming; Tamura, Toshiyo; Chen, Wenxi; Kanaya, Shigehiko

2015-01-01

To help pave a path toward the practical use of continuous unconstrained noninvasive deep body temperature measurement, this study aims to evaluate the structural and thermophysical effects on measurement accuracy for the dual-heat-flux method (DHFM). By considering the thermometer's height, radius, conductivity, density and specific heat as variables affecting the accuracy of DHFM measurement, we investigated the relationship between those variables and accuracy using 3-D models based on finite element method. The results of our simulation study show that accuracy is proportional to the radius but inversely proportional to the thickness of the thermometer when the radius is less than 30.0mm, and is also inversely proportional to the heat conductivity of the heat insulator inside the thermometer. The insights from this study would help to build a guideline for design, fabrication and optimization of DHFM-based thermometers, as well as their practical use. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Virtual Instrument Panel and Serial Interface for the Parr 1672 Thermometer

ERIC Educational Resources Information Center

Salter, Gail; Range, Kevin; Salter, Carl

2005-01-01

The various features of a Visual Basic Program, which implements the 1672 Parr thermometer are described. The program permits remote control of the calorimetry experiment and also provides control for the flow of data and for file storage.

The free electron gas primary thermometer using an ordinary bipolar junction transistor approaches ppm accuracy.

PubMed

Mimila-Arroyo, J

2017-06-01

In this paper, it is demonstrated that the free electron gas primary thermometer based on a bipolar junction transistor is able to provide the temperature with an accuracy of a few parts per million. Its simple functioning principle exploits the behavior of the collector current when properly biased to extract the temperature. Using general purpose silicon transistors at the water triple point (273.16 K) and gallium melting point (302.9146), an accuracy of a few parts per million has been reached, constituting the simplest and the easiest to operate primary thermometer, that might be considered even for the redefinition of Kelvin.

The free electron gas primary thermometer using an ordinary bipolar junction transistor approaches ppm accuracy

NASA Astrophysics Data System (ADS)

Mimila-Arroyo, J.

2017-06-01

In this paper, it is demonstrated that the free electron gas primary thermometer based on a bipolar junction transistor is able to provide the temperature with an accuracy of a few parts per million. Its simple functioning principle exploits the behavior of the collector current when properly biased to extract the temperature. Using general purpose silicon transistors at the water triple point (273.16 K) and gallium melting point (302.9146), an accuracy of a few parts per million has been reached, constituting the simplest and the easiest to operate primary thermometer, that might be considered even for the redefinition of Kelvin.

Response time correlations for platinum resistance thermometers

NASA Technical Reports Server (NTRS)

Pandey, D. K.; Ash, R. L.; Dillon-Townes, L. A.

1985-01-01

The 'plunge method' recommended by ASTM has been used to determine the time constant of 100-ohm platinum resistance thermometers (PRT) considered for use in the National Transonic Facility. It is shown that the response time of ventilated PRT can be correlated with the reciprocal of the heat transfer coefficient in a given field. Universal correlations are established for the 100- and 1000-ohm PRT with uncertainties of 20 and 30 percent, respectively. The correlations are found to be consistent with the uncertainty involved in heat transfer correlations available in the literature and are recommended for use in flowing liquids and gases.

Education at a Glance 2008: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2008

2008-01-01

Across OECD countries, governments are seeking policies to make education more effective while searching for additional resources to meet the increasing demand for education. The 2008 edition of "Education at a Glance: OECD Indicators" enables countries to see themselves in the light of other countries' performance. It provides a rich,…

Education at a Glance 2011: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2011

2011-01-01

Across OECD (Organisation for Economic Cooperation and Development) countries, governments are having to work with shrinking public budgets while designing policies to make education more effective and responsive to growing demand. The 2011 edition of "Education at a Glance: OECD Indicators" enables countries to see themselves in the light of…

Education at a Glance 2010: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2010

2010-01-01

Across OECD countries, governments are seeking policies to make education more effective while searching for additional resources to meet the increasing demand for education. The 2010 edition of "Education at a Glance: OECD Indicators" enables countries to see themselves in the light of other countries' performance. It provides a rich, comparable…

Education at a Glance 2009: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2009

2009-01-01

Across OECD countries, governments are seeking policies to make education more effective while searching for additional resources to meet the increasing demand for education. The 2009 edition of "Education at a Glance: OECD Indicators" enables countries to see themselves in the light of other countries' performance. It provides a rich,…

The OECD and Global Governance in Education

ERIC Educational Resources Information Center

Sellar, Sam; Lingard, Bob

2013-01-01

This review essay discusses the history, evolution and development of the Organisation for Economic Co-operation and Development (OECD) and traces the growing impact of its education work. The essay is in four main sections. The first discusses Carrol and Kellow's "The OECD: A Study of Organizational Adaptation" (Edward Elgar) and…

Employment Patterns in OECD Countries: Reassessing the Role of Policies and Institutions. OECD Economics Department Working Papers No. 486

ERIC Educational Resources Information Center

Bassanini, Andrea; Duval, Romain

2006-01-01

This paper explores the impact of policies and institutions on employment and unemployment of OECD countries in the past decades. Reduced-form unemployment equations, consistent with standard wage setting/price-setting models, are estimated using cross-country/time-series data from 21 OECD countries over the period 1982-2003. In the…

The evaluation of a clinical thermometer for measuring developer temperature in automatic film processors.

PubMed

Wilson, W B; Haus, A G; Nierman, C; Lillie, R; Batz, T; Moore, R

1993-01-01

In medical imaging, the temperature of the developer solution in the film processor affects film speed (radiation dose), film contrast, and film base plus fog. The National Council on Radiation Protection and Measurement (NCRP) Report 99 on Quality Assurance, and the American College of Radiology (ACR) Mammography Quality Control Manual for Radiologic Technologists, indicate that the developer temperature should be within +/- 0.5 degree F (+/- 0.3 degree C) of that recommended by the manufacturer for the specific film/developer combination being used. The accuracy and repeatability of the thermometer is most important. This paper describes the requirements of a thermometer for measuring the temperature of the developer solution and suggests an inexpensive but accurate device for doing so.

Education at a Glance 2013: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing, 2013

2013-01-01

"Education at a Glance: OECD Indicators" is the authoritative source for accurate and relevant information on the state of education around the world. It provides data on the structure, finances, and performance of education systems in more than 40 countries, including OECD members and G20 partners. Featuring more than 100 charts, 200…

Education at a Glance 2014: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing, 2014

2014-01-01

"Education at a Glance: OECD Indicators" is the authoritative source for accurate and relevant information on the state of education around the world. It provides data on the structure, finances, and performance of education systems in the OECD's 34 member countries, as well as a number of partner countries. In the 2014 edition, new…

21st Century Skills and Competences for New Millennium Learners in OECD Countries. OECD Education Working Papers, No. 41

ERIC Educational Resources Information Center

Ananiadou, Katerina; Claro, Magdalean

2009-01-01

This paper discusses issues related to the teaching and assessment of 21st century skills and competencies in OECD countries drawing on the findings of a questionnaire study and other relevant background material such as white papers or curriculum documents. Although all OECD countries were invited to participate in the questionnaire survey,…

A High-Resolution Thermometer for the Range 0.75-1.0 K

NASA Technical Reports Server (NTRS)

Panek, J.; Nash, A.; Larson, M.; Mulders, N.

1999-01-01

We report on a new high-resolution thermometer (HRT) for use near the tricritical point in 3He-4He mixtures. It is based on an existing HRT design that uses a DC-SQUID to detect the magnetization of a paramagnetic sensing element.

Education at a Glance 2012: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing (NJ3), 2012

2012-01-01

"Education at a Glance: OECD Indicators" is the authoritative source for accurate and relevant information on the state of education around the world. It provides data on the structure, finances, and performance of education systems in the OECD's 34 member countries, as well as a number of non-member G20 nations. Featuring more than 140…

Optical Fiber Thermometer Based on Fiber Bragg Gratings

NASA Astrophysics Data System (ADS)

Rosli, Ekbal Bin; Mohd. Noor, Uzer

2018-03-01

Fiber Bragg grating has generated much interest in use as sensors to measure strain, temperature, and other physical parameters. It also the most common component used to develop this sensor with the advantages of simple, intrinsic sensing elements, electrically passive operation, EMI immunity, high sensitivity, compact size and potentially low cost [6]. This paper reports the design of an optical fiber thermometer based on fiber Bragg gratings. The system was developed for detecting temperature and strain by monitoring the shift of Bragg wavelength. The shifting of Bragg wavelength is used to indicate the temperature and strain due to the change in the surrounding temperature and strain. When the temperature and strain reach the exact wavelength level of the system, the temperature and strain value will display on the Arduino liquid crystal display (LCD). The optical fiber will provide the broadband light source and after passing the FBG the Bragg wavelength into the optical spectrum analyzer (OSA). The system is based on FBG as a physical quantity sensor. The temperatures measured is taken from the water bath and that of the strain is provided by amount of slotted mass used. The outcome of this project is to characterize the Bragg wavelength shifting from the fiber Bragg grating output. As the conclusion, this project provides an efficient optical fiber thermometer in measuring temperature and strain in order to replace the use of conventional electrical instruments.

Software Products for Temperature Data Reduction of Platinum Resistance Thermometers (PRT)

NASA Technical Reports Server (NTRS)

Sherrod, Jerry K.

1998-01-01

The main objective of this project is to create user-friendly personal computer (PC) software for reduction/analysis of platinum resistance thermometer (PRT) data. Software products were designed and created to help users of PRT data with the tasks of using the Callendar-Van Dusen method. Sample runs are illustrated in this report.

Tuned-circuit dual-mode Johnson noise thermometers

NASA Astrophysics Data System (ADS)

Shepard, R. L.; Carroll, R. M.; Falter, D. D.; Blalock, T. V.; Roberts, M. J.

1992-02-01

Dual-mode Johnson noise and direct current (DC) resistance thermometers can be used in control systems where prompt indications of temperature changes and long-term accuracy are needed. Such a thermometer is being developed for the SP-100 space nuclear electric power system that requires temperature measurement at 1400 K in space for 10 years, of which 7 are expected to be at full reactor power. Several direct coupled and transformer coupled, tuned resistance inductance capacitance (RLC) circuits that produce a single, continuous voltage signal were evaluated for noise temperature measurement. The simple direct coupled RLC circuit selected provides a mean squared noise voltage that depends only on the capacitance used and the temperature of the sensor, and it is independent of the value of or changes in the sensor resistance. These circuits provide a noise signal with long term accuracy but require integrating noise signals for a finite length of time. The four wire resistor for the noise temperature sensor allows simultaneous DC resistance measurements to be made that provide a prompt, continuous temperature indication signal. The DC current mode is employed continuously, and a noise voltage measurement is made periodically to correct the temperature indication. The differential noise voltage preamplifier used substantially reduces electromagnetic interference (EMI) in the system. A sensor has been tested that should provide good performance (+/- 1 percent accuracy) and long-term (10 year) reliability in space environments. Accurate noise temperature measurements were made at temperatures above 1300 K, where significant insulator shunting occurs, even though shunting does affect the dc resistance measurements and makes the system more susceptible to EMI.

Stability of some epoxy-encapsulated diode thermometers

NASA Technical Reports Server (NTRS)

Mangum, B. W.; Evans, G. A., Jr.

1986-01-01

The stability upon thermal cycling and handling of ten small, epoxy-encapsulated silicon diode thermometers at six temperatures in the range from liquid nitrogen temperatures to about 60 C. The nominal temperatures of measurement were -196, -78, 0, 20, 40, and 60 C, as measured on the International Practical Temperature Scale of 1968. Diodes were to be thermally cycled 15 to 20 times. Since NASA anticipates that the uncertainty in their temperature measurements will be + or - 50 mK, uncertainties as large as + or - 10 mK in the measurements of the evaluaton can be accommodated without deleteriously affecting the value of the results of the investigation.

Reliability of an infrared forehead skin thermometer for core temperature measurements.

PubMed

Kistemaker, J A; Den Hartog, E A; Daanen, H A M

2006-01-01

The SensorTouch thermometer performs an infrared measurement of the skin temperature above the Superficial Temporal Artery (STA). This study evaluates the validity and the accuracy of the SensorTouch thermometer. Two experiments were performed in which the body temperature was measured with a rectal sensor, with an oesophageal sensor and with the SensorTouch. After entering a warm chamber the SensorTouch underestimated the core temperature during the first 10 minutes. After that, the SensorTouch was not significantly different from the core temperature, with an average difference of 0.5 degrees C (SD 0.5 degrees C) in the first study and 0.3 degrees C (SD 0.2 degrees C) in the second study. The largest differences between the SensorTouch and the core temperature existed 15 minutes after the start of the exercise. During this period the SensorTouch was significantly higher than the core temperature. The SensorTouch did not provide reliable values of the body temperature during periods of increasing body temperature, but the SensorTouch might work under stable conditions.

Assessing the accuracy of globe thermometer method in predicting outdoor mean radiant temperature under Malaysia tropical microclimate

NASA Astrophysics Data System (ADS)

Khrit, N. G.; Alghoul, M. A.; Sopian, K.; Lahimer, A. A.; Elayeb, O. K.

2017-11-01

Assessing outdoor human thermal comfort and urban climate quality require experimental investigation of microclimatic conditions and their variations in open urban spaces. For this, it is essential to provide quantitative information on air temperature, humidity, wind velocity and mean radiant temperature. These parameters can be quantified directly except mean radiant temperature (Tmrt). The most accurate method to quantify Tmrt is integral radiation measurements (3-D shortwave and long-wave) which require using expensive radiometer instruments. To overcome this limitation the well-known globe thermometer method was suggested to calculate Tmrt. The aim of this study was to assess the possibility of using indoor globe thermometer method in predicting outdoor mean radiant temperature under Malaysia tropical microclimate. Globe thermometer method using small and large sizes of black-painted copper globes (50mm, 150mm) were used to estimate Tmrt and compare it with the reference Tmrt estimated by integral radiation method. The results revealed that the globe thermometer method considerably overestimated Tmrt during the middle of the day and slightly underestimated it in the morning and late evening. The difference between the two methods was obvious when the amount of incoming solar radiation was high. The results also showed that the effect of globe size on the estimated Tmrt is mostly small. Though, the estimated Tmrt by the small globe showed a relatively large amount of scattering caused by rapid changes in radiation and wind speed.

In-situ technique for checking the calibration of platinum resistance thermometers

NASA Technical Reports Server (NTRS)

Daryabeigi, Kamran; Dillon-Townes, Lawrence A.

1987-01-01

The applicability of the self-heating technique for checking the calibration of platinum resistance thermometers located inside wind tunnels was investigated. This technique is based on a steady state measurement of resistance increase versus joule heating. This method was found to be undesirable, mainly because of the fluctuations of flow variables during any wind tunnel testing.

Correlation of Handheld Infrared Skin Thermometer and Infrared Videothermography Device for Measurement of Corneal Temperature.

PubMed

Oztas, Zafer; Barut Selver, Ozlem; Akkin, Cezmi; Canturk, Ecem; Afrashi, Filiz

2016-05-01

In our study, we aimed to investigate the correlation of handheld infrared skin thermometer and videothermography device for the measurement of corneal temperature. Forty healthy individuals (80 eyes) were enrolled to the study. Participants underwent a detailed ophthalmologic examination and medical history review for excluding any ocular and systemic diseases. The measurements of the central corneal temperature were performed in a room having constant temperature, humidity, and brightness levels. To avoid any variability, all the temperature measurements were performed in the same examination room by a single examiner. The temperature was measured with a handheld infrared skin thermometer (MEDISANA, FTN) from the corneal surface. The same instrument was also used to measure the subjects' body temperature. Moreover, the subjects underwent the corneal temperature measurement by a noncontact videothermography device (Optris PI 450; Optris GmbH). The male to female ratio was 19:21 among the subjects. The mean age was 25.1±4.7 years. The mean body temperature was 36.93±0.33°C. The mean corneal temperatures measured by the handheld infrared skin thermometer and the ocular videothermography device were 36.94±0.28°C and 35.61±0.61°C, respectively (P<0.01). The mean temperature difference was 1.34±0.57°C, with a 95% confidence interval. There was a moderate correlation between the corneal temperatures measured by the 2 devices in the right, the left eyes, and both eyes, respectively (P=0.450, 0.539, 0.490). Handheld infrared skin thermometers can be used for the evaluation of the corneal temperature. These devices may provide a simple, practical, and cheaper way to detect the corneal temperature, and the widely performed corneal temperature measurements may afford us to understand the temperature variability in numerous ocular conditions in a better way.

Tympanic ear thermometer assessment of body temperature among patients with cognitive disturbances. An acceptable and ethically desirable alternative?

PubMed

Aadal, Lena; Fog, Lisbet; Pedersen, Asger Roer

2016-12-01

Investigation of a possible relation between body temperature measurements by the current generation of tympanic ear and rectal thermometers. In Denmark, a national guideline recommends the rectal measurement. Subsequently, the rectal thermometers and tympanic ear devices are the most frequently used and first choice in Danish hospital wards. Cognitive changes constitute challenges with cooperating in rectal temperature assessments. With regard to diagnosing, ethics, safety and the patients' dignity, the tympanic ear thermometer might comprise a desirable alternative to rectal noninvasive measurement of body temperature during in-hospital-based neurorehabilitation. A prospective, descriptive cohort study. Consecutive inclusion of 27 patients. Linear regression models were used to analyse 284 simultaneous temperature measurements. Ethical approval for this study was granted by the Danish Data Protection Agency, and the study was completed in accordance with the Helsinki Declaration 2008. About 284 simultaneous rectal and ear temperature measurements on 27 patients were analysed. The patient-wise variability of measured temperatures was significantly higher for the ear measurements. Patient-wise linear regressions for the 25 patients with at least three pairs of simultaneous ear and rectal temperature measurements showed large interpatient variability of the association. A linear relationship between the rectal body temperature assessment and the temperature assessment employing the tympanic thermometer is weak. Both measuring methods reflect variance in temperature, but ear measurements showed larger variation. © 2016 Nordic College of Caring Science.

Performance of Different Light Sources for the Absolute Calibration of Radiation Thermometers

NASA Astrophysics Data System (ADS)

Martín, M. J.; Mantilla, J. M.; del Campo, D.; Hernanz, M. L.; Pons, A.; Campos, J.

2017-09-01

The evolving mise en pratique for the definition of the kelvin (MeP-K) [1, 2] will, in its forthcoming edition, encourage the realization and dissemination of the thermodynamic temperature either directly (primary thermometry) or indirectly (relative primary thermometry) via fixed points with assigned reference thermodynamic temperatures. In the last years, the Centro Español de Metrología (CEM), in collaboration with the Instituto de Óptica of Consejo Superior de Investigaciones Científicas (IO-CSIC), has developed several setups for absolute calibration of standard radiation thermometers using the radiance method to allow CEM the direct dissemination of the thermodynamic temperature and the assignment of the thermodynamic temperatures to several fixed points. Different calibration facilities based on a monochromator and/or a laser and an integrating sphere have been developed to calibrate CEM's standard radiation thermometers (KE-LP2 and KE-LP4) and filter radiometer (FIRA2). This system is based on the one described in [3] placed in IO-CSIC. Different light sources have been tried and tested for measuring absolute spectral radiance responsivity: a Xe-Hg 500 W lamp, a supercontinuum laser NKT SuperK-EXR20 and a diode laser emitting at 6473 nm with a typical maximum power of 120 mW. Their advantages and disadvantages have been studied such as sensitivity to interferences generated by the laser inside the filter, flux stability generated by the radiant sources and so forth. This paper describes the setups used, the uncertainty budgets and the results obtained for the absolute temperatures of Cu, Co-C, Pt-C and Re-C fixed points, measured with the three thermometers with central wavelengths around 650 nm.

A Cell-Targeted Non-Cytotoxic Fluorescent Nanogel Thermometer Created with an Imidazolium-Containing Cationic Radical Initiator.

PubMed

Uchiyama, Seiichi; Tsuji, Toshikazu; Kawamoto, Kyoko; Okano, Kentaro; Fukatsu, Eiko; Noro, Takahiro; Ikado, Kumiko; Yamada, Sayuri; Shibata, Yuka; Hayashi, Teruyuki; Inada, Noriko; Kato, Masaru; Koizumi, Hideki; Tokuyama, Hidetoshi

2018-05-04

A cationic fluorescent nanogel thermometer based on thermo-responsive N-isopropylacrylamide and environment-sensitive benzothiadiazole was developed with a new azo compound bearing imidazolium rings as the first cationic radical initiator. This cationic fluorescent nanogel thermometer showed an excellent ability to enter live mammalian cells in a short incubation period (10 min), a high sensitivity to temperature variations in live cells (temperature resolution of 0.02-0.84 °C in the range 20-40 °C), and remarkable non-cytotoxicity, which permitted ordinary cell proliferation and even differentiation of primary cultured cells. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Dual-mode self-validating resistance/Johnson noise thermometer system

DOEpatents

Shepard, Robert L.; Blalock, Theron V.; Roberts, Michael J.

1993-01-01

A dual-mode Johnson noise and DC resistance thermometer capable of use in control systems where prompt indications of temperature changes and long term accuracy are needed. A resistance-inductance-capacitance (RLC) tuned circuit produces a continuous voltage signal for Johnson noise temperature measurement. The RLC circuit provides a mean-squared noise voltage that depends only on the capacitance used and the temperature of the sensor. The sensor has four leads for simultaneous coupling to a noise signal processor and to a DC resistance signal processor.

OECD Maximum Residue Limit Calculator

EPA Pesticide Factsheets

With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.

Sonic Thermometer for High-Altitude Balloons

NASA Technical Reports Server (NTRS)

Bognar, John

2012-01-01

The sonic thermometer is a specialized application of well-known sonic anemometer technology. Adaptations have been made to the circuit, including the addition of supporting sensors, which enable its use in the high-altitude environment and in non-air gas mixtures. There is a need to measure gas temperatures inside and outside of superpressure balloons that are flown at high altitudes. These measurements will allow the performance of the balloon to be modeled more accurately, leading to better flight performance. Small thermistors (solid-state temperature sensors) have been used for this general purpose, and for temperature measurements on radiosondes. A disadvantage to thermistors and other physical (as distinct from sonic) temperature sensors is that they are subject to solar heating errors when they are exposed to the Sun, and this leads to issues with their use in a very high-altitude environment

An International Intercomparison of Argon Triple Point Calibration Facilities, Accommodating Long-stem Thermometers

NASA Astrophysics Data System (ADS)

Bloembergen, P.; Bonnier, G.; Ronsin, H.

1990-01-01

Argon triple point calibration facilities have been compared among eight laboratories with one transfer system, employing local long-stem standard platinum resistance thermometers. The apparatus intercompared, included a sealed cell and its associated cryostat. As is evidenced by the results of long-term investigations, previously performed at the INM, cells of the type employed may show a triple-point temperature, which is stable within the reproducibility of the measurements (simeq0,1 mK) over a period of about 10 years. At each laboratory the mean difference between the Argon triple-point temperature of the transfer cell (t) and the local cell (i) has been determined, using a standard resistance thermometer previously calibrated at the fixed points, according to the IPTS-68; associated repeatabilities are typically of the order of 0,1 mK. The reproducibility attained by measuring the mean difference in different laboratories, using cells of the same type and origin (INM), amounts to 0,4 mK.

Science, Technology and Society--An Authentic Exploration of IR Thermometers Application in Schools

ERIC Educational Resources Information Center

Tse, Isaac Pak Hoi; Leung, Winston Kwok Kuen; Chan, Shing Yi

2004-01-01

"Science, Technology and Society" was identified an essential strand in the new Science Education curriculum guide. Shortly after the severe acute respiratory syndrome (SARS) threat to Hong Kong technical dealers introduced Infrared non-contact thermometers as a solution for schools to measure body temperature for a large number of…

Tackling Nurse Shortages in OECD Countries. OECD Health Working Papers, No. 19

ERIC Educational Resources Information Center

Simoens, Steven; Villeneuve, Mike; Hurst, Jeremy

2005-01-01

There are reports of current nurse shortages in all but a few OECD countries. With further increases in demand for nurses expected and nurse workforce ageing predicted to reduce the supply of nurses, shortages are likely to persist or even increase in the future, unless action is taken to increase flows into and reduce flows out of the workforce…

OECD Reviews of School Resources: Uruguay 2016

ERIC Educational Resources Information Center

Santiago, Paulo; Ávalos, Beatrice; Burn, Tracey; Morduchowicz, Alejandro; Radinger, Thomas

2016-01-01

The effective use of school resources is a policy priority across OECD countries. The "OECD Reviews of School Resources" explore how resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. The series considers four types of resources: financial resources, such as…

On-and-off chip cooling of a Coulomb blockade thermometer down to 2.8 mK

NASA Astrophysics Data System (ADS)

Palma, M.; Scheller, C. P.; Maradan, D.; Feshchenko, A. V.; Meschke, M.; Zumbühl, D. M.

2017-12-01

Cooling nanoelectronic devices below 10 mK is a great challenge since thermal conductivities become very small, thus creating a pronounced sensitivity to heat leaks. Here, we overcome these difficulties by using adiabatic demagnetization of both the electronic leads and the large metallic islands of a Coulomb blockade thermometer. This reduces the external heat leak through the leads and also provides on-chip refrigeration, together cooling the thermometer down to 2.8 ± 0.1 mK. We present a thermal model which gives a good qualitative account and suggests that the main limitation is heating due to pulse tube vibrations. With better decoupling, temperatures below 1 mK should be within reach, thus opening the door for μK nanoelectronics.

Ferromagnetic-Insulator-Based Superconducting Junctions as Sensitive Electron Thermometers

NASA Astrophysics Data System (ADS)

Giazotto, F.; Solinas, P.; Braggio, A.; Bergeret, F. S.

2015-10-01

We present an exhaustive theoretical analysis of charge and thermoelectric transport in a normal-metal-ferromagnetic-insulator-superconductor junction and explore the possibility of its use as a sensitive thermometer. We investigate the transfer functions and the intrinsic noise performance for different measurement configurations. A common feature of all configurations is that the best temperature-noise performance is obtained in the nonlinear temperature regime for a structure based on an Europium chalcogenide ferromagnetic insulator in contact with a superconducting Al film structure. For an open-circuit configuration, although the maximal intrinsic temperature sensitivity can achieve 10 nK Hz-1 /2 , a realistic amplifying chain will reduce the sensitivity up to 10 μ K Hz-1 /2 . To overcome this limitation, we propose a measurement scheme in a closed-circuit configuration based on state-of-the-art superconducting-quantum-interference-device detection technology in an inductive setup. In such a case, we show that temperature-noise can be as low as 35 nK Hz-1 /2 . We also discuss a temperature-to-frequency converter where the obtained thermovoltage developed over a Josephson junction operated in the dissipative regime is converted into a high-frequency signal. We predict that the structure can generate frequencies up to approximately 120 GHz and transfer functions up to 200 GHz /K at around 1 K. If operated as an electron thermometer, the device may provide temperature-noise lower than 35 nK Hz-1 /2 thereby being potentially attractive for radiation-sensing applications.

Clinical accuracy of non-contact infrared thermometer from umbilical region in children: A new side.

PubMed

Apa, Hurşit; Gözmen, Salih; Keskin-Gözmen, Şükran; Aslan, Fatma; Bayram, Nuri; Devrim, İlker

2016-01-01

Measurement from axillary site with digital thermometer has been accepted as the most accurate method. But this method is time consuming. Tympanic and forehead measurements are often used but don't always seem to be more appropriate. Another site, umbilical region, could be an alternative site. This study aims to compare the measurements with axillary digital thermometer and non-contact infrared thermometers at sites from umbilicus and forehead to determine whether umbilical site could be used accurately in children. For each method, 2,048 measurements in total were performed. Using axillary method as gold standard, with a cut-off temperature of 38oC, the sensitivities and specificities, positive and negative predictive values of umbilical and forehead temperatures and area under the ROC curve were determined in non obese children. There was a significant positive correlation between axillary and umbilical temperatures with a correlation coefficient of 0.78. The average difference between the mean of both axillary and umbilical temperatures was -0.47 ± 0.65°C. The Bland-Altman plot showed good accuracy with only 2.5 % of the readings falling outside the 95% level of confidence. Umbilical measurements showed sensitivity of 71.7% and specificity of 95.8%. The area under the ROC curve was 0.93. The easy application may lead noncontact measurements from umbilicus site to be the preferable method for health care providers, but agreement limits mentioned in this study should be considered.

Education and Obesity in Four OECD Countries. OECD Education Working Papers, No. 39

ERIC Educational Resources Information Center

Sassi, Franco; Devaux, Marion; Church, Jody; Cecchini, Michele; Borgonovi, Francesca

2009-01-01

An epidemic of obesity has been developing in virtually all OECD countries over the last 30 years. Existing evidence provides strong suggestions that such epidemic has affected certain social groups more than others. In particular, education appears to be associated with a lower likelihood of obesity, especially among women. A range of analyses of…

Shifting Themes in OECD Country Reviews of Higher Education

ERIC Educational Resources Information Center

Hunter, Carrie P.

2013-01-01

There have been changes in the political economy since the 1980s, and the Organization for Economic Cooperation and Development (OECD) has changed as well. Scholars have noted shifts in OECD discourse in some policy fields since that time: shifts away from what might be called classic neoliberal perspectives. This paper reflects on the changes in…

Report on AFRIMETS supplementary comparison: platinum resistance thermometer and digital thermometer calibrations against ITS-90 over the range -50 °C to 450 °C (AFRIMETS.T-S1)

NASA Astrophysics Data System (ADS)

Liedberg, Hans; Abdelaziz, Yasser; Tesfaye, Fitsum; Egadwa, Wilson; Norranim, Uthai; Rwashana, Simon; Kagoma, Alphonce; Ziagi, Adam; Kwong, Christian Ng Ha; Madeleine, Gilbert

2017-01-01

A Regional Metrology Organization (RMO) supplementary comparison of platinum resistance thermometer and digital thermometer (AFRIMETS.T-S1) was carried out by the National Metrology Institute of South Africa (NMISA), National Institute for Standards Egypt (NIS), National Metrology Institute of Ethiopia (NMIE), Kenya Bureau of Standards (KEBS), National Institute of Metrology Thailand (NIMT), Uganda National Bureau of Standards (UNBS), Tanzania Bureau of Standards (TBS), Mauritius Standards Bureau (MSB) and Seychelles Bureau of Standards (SBS) between March 2008 and October 2010. The temperature range of the inter comparison is -50 °C to 450 °C. The results of this comparison are reported here, along with descriptions of the Artefacts and devices used during measurement. This report also presents the uncertainty budget. The results are analysed and normalized error (En) values are reported. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCT, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Evaluation tests of platinum resistance thermometers for a cryogenic wind tunnel application

NASA Technical Reports Server (NTRS)

Germain, E. F.; Compton, E. C.

1984-01-01

Thirty-one commercially designed platinum resistance thermometers were evaluated for applicability to stagnation temperature measurements between -190 C and +65 C in the Langley Research Center's National Transonic Facility. Evaluation tests included X-ray shadowgraphs, calibrations before and after aging, and time constant measurements. Two wire-wound low thermal mass probes of a conventional design were chosen as most suitable for this cryogenic wind tunnel application.

Dual-sensing porphyrin-containing copolymer nanosensor as full-spectrum colorimeter and ultra-sensitive thermometer.

PubMed

Yan, Qiang; Yuan, Jinying; Kang, Yan; Cai, Zhinan; Zhou, Lilin; Yin, Yingwu

2010-04-28

A porphyrin-containing copolymer has dual-sensing in response to metal ions and temperature as a novel nanosensor. Triggered by ions, the sensor exhibits full-color tunable behavior as a cationic detector and colorimeter. Responding to temperature, the sensor displays an "isothermal" thermochromic point as an ultra-sensitive thermometer.

Harmonizing and Optimizing Fish Testing Methods: The OECD Framework Project

EPA Science Inventory

The Organisation for Economic Cooperation and Development (OECD) serves a key role in the international harmonization of testing of a wide variety of chemicals. An integrated fish testing framework project was initiated in mid-2009 through the OECD with the US as the lead country...

Does healthcare financing converge? Evidence from eight OECD countries.

PubMed

Chen, Wen-Yi

2013-12-01

This study investigated the convergence of healthcare financing across eight OECD countries during 1960-2009 for the first time. The panel stationary test incorporating both shapes of multiple structural breaks (i.e., sharp drifts and smooth transition shifts) and cross-sectional dependence was used to provide reliable evidence of convergence in healthcare financing. Our results suggested that the public share of total healthcare financing in eight OECD countries has exhibited signs of convergence towards that of the US. The convergence of healthcare financing not only reflected a decline in the share of public healthcare financing in these eight OECD countries but also exhibited an upward trend in the share of public healthcare financing in the US over the period of 1960-2009.

The OECD Fish Testing Framework Project: Summary of Workshop Recommendations

EPA Science Inventory

An integrated Fish Testing Framework was initiated in mid-2009 as OECD Project 2.30 with the United States as the lead country. The objectives of the project were to review the regulatory needs and data requirements for fish testing and review the currency of existing OECD Test ...

OECD, "Key Competencies" and the New Challenges of Educational Inequality

ERIC Educational Resources Information Center

Takayama, Keita

2013-01-01

In this paper, I develop a critique of the Organization for Economic Cooperation and Development (OECD)-based lifelong learning policy discourse with a particular focus on "key competencies" (KCs) and its equity implications for school curricular policies. First, I review the discussion of KCs in the writings by the OECD-affiliated…

Accuracy of infrared thermometers in very low birth weight infants and impact on newborn behavioural states.

PubMed

Jarvis, Melanie; Guy, Katelyn J; König, Kai

2013-06-01

To study the impact on newborn behavioural states and accuracy of three infrared thermometers compared with digital axillary thermometer measurements in very low birth weight infants. Single-centre prospective observational study. Preterm infants born <1500-g birth weight were eligible. Infants were observed for pre-measurement behaviour state using a five-point neonatal behaviour observation tool. One infrared temperature was taken from each of the devices, followed by an axillary measurement. Further behaviour-state observations were recorded following infrared and axillary measurements. One hundred measurements were collected from each infrared device among a cohort of 42 very low birth weight infants. Only one infrared device showed satisfactory agreement with bias -0.071 (95% limits of agreement -0.68 to 0.54). The other two devices demonstrated poor agreement: bias -1.34; 95% limits of agreement -2.62 to -0.5 and bias -0.56; 95% limits of agreement -1.38 to 0.25. Neonatal behavioural scores showed only minimal changes when infrared measurements were performed but increased significantly following axillary measurements. The difference between the two modalities was statistically significant with a mean increase of 1.44 points following axillary measurements (95% confidence interval 1.21 to 1.67, P < 0.001). Temperature measurements taken with infrared thermometers demonstrated less disruption to preterm infants' behavioural state, however accuracy of devices varied. © 2013 The Authors. Journal of Paediatrics and Child Health © 2013 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

Time-Lapse and Slow-Motion Tracking of Temperature Changes: Response Time of a Thermometer

ERIC Educational Resources Information Center

Moggio, L.; Onorato, P.; Gratton, L. M.; Oss, S.

2017-01-01

We propose the use of a smartphone based time-lapse and slow-motion video techniques together with tracking analysis as valuable tools for investigating thermal processes such as the response time of a thermometer. The two simple experimental activities presented here, suitable also for high school and undergraduate students, allow one to measure…

The Supply of Physician Services in OECD Countries. OECD Health Working Papers, No. 21

ERIC Educational Resources Information Center

Simoens, Steven; Hurst, Jeremy

2006-01-01

The delivery of an appropriate quantity and quality of health care in an efficient way requires, among other things, matching the supply with the demand for the services of physicians, over time. Such matching has led to very different levels of physicians per million population across OECD countries--because of variations, among other things,…

Final report on SIM.T-S5: comparison of the calibration of 100 Ω platinum resistance thermometers

NASA Astrophysics Data System (ADS)

del Campo, D.; García, S.; Velasquez, A.; Medrano, J. A.; Solano, A.; Torres, H. E.

2015-01-01

An International Comparison on industrial Platinum Resistance Thermometers (PRTs) among the National Metrology Institutes (NMIs) of Spain, Panama, Honduras, El Salvador, Costa Rica and Nicaragua began in 2013 and was successfully completed in 2014. Two PRTs were circulated (hand carried) and compared in the range from -38.8 °C up to 250 °C. The Centro Español de Metrología (Spanish NMI), CEM, acted as the pilot laboratory providing the reference value of the comparison. The thermometers have shown an acceptable behavior throughout the comparison, therefore the results can be considered valid for comparing the measurement capabilities of the participant laboratories. The equivalence between the participant laboratories in the calibration of platinum resistance thermometers by comparison in the range from -38,8 °C up to 250 °C has been demonstrated in almost all cases. This report presents the results of this comparison and provides detailed information of the measurements performed by the participating laboratories. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCT, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Performance and Characterization of Magnetic Penetration Thermometer Devices for X-Ray Spectroscopy

NASA Technical Reports Server (NTRS)

Porst, J. -P.; Adams, J. S.; Bandler, S. R.; Balvin, M.; Busch, S. E.; Denis, K. L.; Kelly, D.; Nagler, P.; Sadleir, J. E.; Seidel, G. M.;

Equity Index in the School Systems of Selected OECD Countries

ERIC Educational Resources Information Center

Ozmusul, Mustafa

2013-01-01

The purpose of this study is to analysis the equity in the school systems of selected OECD countries. For this purpose, the international data for selected OECD countries was analyzed in terms of four dimensions of equity as learning equity, school resource equity, participating in education, and digital equity. When analyzing data, the equity…

Inequality in OECD countries.

PubMed

Thévenot, Celine

2017-08-01

This article recalls the state of play of inequality levels and trends in OECD countries, with a special focus on Nordic countries. It sheds light on explaining the drivers of the rise in inequality and its economic consequences. It addresses in particular the issue of redistribution through taxes and transfers. It concludes with an overview of policy packages that should be considered to address the issue of rising inequalities.

Implementing Inclusive Education. OECD Proceedings.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

This document contains 25 papers presented at 1993 and 1995 conferences convened as part of a 7-year international project concerned with the integration of children with special educational needs into mainstream schools. The papers are: (1) "The OECD Project: Integrating Students with Special Needs into Mainstream Schools" (Peter Evans and Don…

High-Temperature Thermometer Using Cr-Doped GdAlO3 Broadband Luminescence

NASA Technical Reports Server (NTRS)

Eldridge, Jeffrey; Chambers, Matthew

2011-01-01

A new concept has been developed for a high-temperature luminescence-based optical thermometer that both shows the desired temperature sensitivity in the upper temperature range of present state-of-the-art luminescence thermometers (above 1,300 C), while maintaining substantial stronger luminescence signal intensity that will allow these optical thermometers to operate in the presence of the high thermal background radiation typical of industrial applications. This objective is attained by using a Cr-doped GdAlO3 (Cr:GdAlO3) sensor with an orthorhombic perovskite structure, resulting in broadband luminescence that remains strong at high temperature due to the favorable electron energy level spacing of Cr:GdAlO3. The Cr:GdAlO3 temperature (and pressure) sensor can be incorporated into, or applied onto, a component s surface when a non-contact surface temperature measurement is desired, or alternatively, the temperature sensor can be attached to the end of a fiber-optic probe that can then be positioned at the location where the temperature measurement is desired. In the case of the fiber-optic probe, both the pulsed excitation and the luminescence emission travel through the fiber-optic light guide. In either case, a pulsed light source provides excitation of the luminescence, and the broadband luminescence emission is collected. Real-time temperature measurements are obtain ed using a least-squares fitting algorithm that determines the luminescence decay time, which has a known temperature dependence established by calibration. Due to the broad absorption and emission bands for Cr:GdAlO3, there is considerable flexibility in the choice of excitation wavelength and emission wavelength detection bands. The strategic choice of the GdAlO3 host is based on its high crystal field, phase stability, and distorted symmetry at the Cr3+ occupation sites. The use of the broadband emission for temperature sensing at high temperatures is a key feature of the invention and is

A melting-point-of gallium apparatus for thermometer calibration.

PubMed

Sostman, H E; Manley, K A

1978-08-01

We have investigated the equilibrium melting point of gallium as a temperature fixed-point at which to calibrate small thermistor thermometers, such as those used to measure temperature in enzyme reaction analysis and other temperature-dependent biological assays. We have determined that the melting temperature of "6N" (99.999% pure) gallium is 29.770 +/- 0.002 degrees C, and that the constant-temperature plateau can be prolonged for several hours. We have designed a simple automated apparatus that exploits this phenomenon and that permits routine calibration verification of thermistor temperature probes throughout the laboratory day. We describe the physics of the gallium melt, and the design and use of the apparatus.

Synthesis of OECD work on environment and transport and survey of related OECD, IEA and ECMT activities

DOT National Transportation Integrated Search

2000-04-17

This document includes two related papers. The first, The Background and Synthesis Report, presents an overview of key conclusions and findings that can be derived from recent work by the Organisation for Economic Co-operation and Development (OECD) ...

Utilization rates of hip arthroplasty in OECD countries.

PubMed

Pabinger, C; Geissler, A

2014-06-01

Hip arthroplasty and revision surgery is growing exponentially in OECD countries, but rates vary between countries. We extracted economic data and utilization rates data about hip arthroplasty done in OECD countries between 1990 and 2011. Absolute number of implantations and compound annual growth rates were computed per 100,000 population and for patients aged 65 years old and over and for patients aged 64 years and younger. In the majority of OECD countries, there has been a significant increase in the utilization of total hip arthroplasty in the last 10 years, but rates vary to a great extent: In the United States, Switzerland, and Germany the utilization rate exceeds 200/100,000 population whereas in Spain and Mexico rates are 102 and 8, respectively. There is a strong correlation between gross domestic product (GDP) and health care expenditures per capita with utilization rate. Utilization rates in all age groups have continued to rise up to present day. A seven fold higher growth rate was seen in patients aged 64 years and younger as compared to older patients. We observed a 38-fold variation in the utilization of hip arthroplasty among OECD countries, correlating with GDP and health care expenditures. Over recent years, there has been an increase in the utilization rate in most countries. This was particularly evident in the younger patients. Due to increasing life expectancy and the disproportionally high use of arthroplasty in younger patients we expect an exponential increase of revision rate in the future. Copyright © 2014 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Adults, Computers and Problem Solving: "What's the Problem?" OECD Skills Studies

ERIC Educational Resources Information Center

Chung, Ji Eun; Elliott, Stuart

2015-01-01

The "OECD Skills Studies" series aims to provide a strategic approach to skills policies. It presents OECD internationally comparable indicators and policy analysis covering issues such as: quality of education and curricula; transitions from school to work; vocational education and training (VET); employment and unemployment; innovative…

Fever detection in under 5 children in a tertiary health facility using the infrared tympanic thermometer in the oral mode.

PubMed

Edelu, Benedict O; Ojinnaka, Ngozi C; Ikefuna, Anthony N

2011-01-22

Monitoring of body temperature is an important clinical procedure in the care of sick children, especially the under-5 children, as many disease conditions present with fever. The oral mercury-in-glass thermometer which has relatively good accuracy cannot be used in children less than 5 years because it requires their cooperation. This study was aimed at using the infrared tympanic thermometer (IRTT) in oral mode to measure temperature in febrile and afebrile children less than 5 years. Rectal and tympanic temperatures were measured consecutively in 400 febrile and 400 afebrile under-5 children matched for age, using the mercury-in-glass thermometer and the IRTT in oral mode respectively. In the febrile children, the mean tympanic temperature was 38.6 ± 0.9°C, while the mean rectal temperature was 39.0 ± 0.8°C. In the afebrile group, the mean tympanic temperature was 37.0 ± 0.4°C, while the mean rectal temperature was 37.4 ± 0.3°C. The mean difference between rectal and tympanic temperatures in both groups was statistically significant. There was good correlation between the two temperatures. The tympanic thermometer used in the oral mode had a sensitivity of 87.3% and a specificity of 96.5%. The IRTT (oral mode) may not be reliable in estimating 'core' body temperature in children under the age of five years, but with a fairly good sensitivity and specificity, as well as its other advantages such as short duration of measurement, convenience and safety, it is a useful instrument for screening children with fever in a busy setup.

The OECD and the Expansion of PISA: New Global Modes of Governance in Education

ERIC Educational Resources Information Center

Sellar, Sam; Lingard, Bob

2014-01-01

This paper examines the expansion of the OECD's Programme for International Student Assessment (PISA) and associated growth in the influence of the OECD's education work. PISA has become one of the OECD's most successful "products" and has both strengthened the role of the Directorate for Education within the organization and enhanced…

Too Eager to Comply? OECD Education Policies and the Finnish Response

ERIC Educational Resources Information Center

Rinne, Risto; Kallo, Johanna; Hokka, Sanna

2004-01-01

The Organisation for Economic Cooperation and Development (OECD) has strongly influenced European education policy and the entire global neo-liberally toned discourse that nowadays prevails in the implementation of national education policy and educational reforms. The educational policy governance of the OECD is based on overall and supranational…

Measurement station for interim inspections of Lightbridge metallic fuel rods at the Halden Boiling Water Reactor

NASA Astrophysics Data System (ADS)

Hartmann, C.; Totemeier, A.; Holcombe, S.; Liverud, J.; Limi, M.; Hansen, J. E.; Navestad, E. AB(; )

2018-01-01

Lightbridge Corporation has developed a new Uranium-Zirconium based metallic fuel. The fuel rods aremanufactured via a co-extrusion process, and are characterized by their multi-lobed (cruciform-shaped) cross section. The fuel rods are also helically-twisted in the axial direction. Two experimental fuel assemblies, each containing four Lightbridge fuel rods, are scheduled to be irradiated in the Halden Boiling Water Reactor (HBWR) starting in 2018. In addition to on-line monitoring of fuel rod elongation and critical assembly conditions (e.g. power, flow rates, coolant temperatures, etc.) during the irradiation, several key parameters of the fuel will be measured out-of-core during interim inspections. An inspection measurement station for use in the irradiated fuel handling compartment at the HBWR has therefore been developed for this purpose. The multi-lobed cladding cross section combined with the spiral shape of the Lightbridge metallic fuel rods requires a high-precision guiding system to ensure good position repeatability combined with low-friction guiding. The measurement station is equipped with a combination of instruments and equipment supplied from third-party vendors and instruments and equipment developed at Institute for Energy Technology (IFE). Two sets of floating linear voltage differential transformer (LVDT) pairs are used to measure swelling and diameter changes between the lobes and the valleys over the length of the fuel rods. Eddy current probes are used to measure the thickness of oxide layers in the valleys and on the lobe tips and also to detect possible surface cracks/pores. The measurement station also accommodates gamma scans. Additionally, an eddy-current probe has been developed at IFE specifically to detect potential gaps or discontinuities in the bonding layer between the metallic fuel and the Zirconium alloy cladding. Potential gaps in the bonding layer will be hidden behind a 0.5-1.0 mm thick cladding wall. It has therefore been

Education Today 2009: The OECD Perspective

ERIC Educational Resources Information Center

OECD Publishing (NJ3), 2009

2009-01-01

This book presents OECD's main messages regarding the current state of education. Organised into nine sections, this report examines early childhood, schooling, transitions beyond initial education, higher education, adult education, lifelong learning, outcomes and returns, equity, and innovation. Each section offers both key findings and…

Nano-Fabrication Methods for Micro-Miniature Optical Thermometers Suited to High Temperatures and Harsh Environments

NASA Astrophysics Data System (ADS)

DePew, K. A.; Ma, C.; Schiffbauer, J. D.; Wang, J.; Dong, B.; Lally, E.; Wang, A.

2012-12-01

The Center for Photonics Technology (CPT) at Virginia Tech is engaged in cutting edge research of fiber optic sensing technologies. One current research area is the design of fiber optic temperature sensors for harsh environments. Fiber optic temperature sensing offers significant advantages over electronic sensing in terms of size and insensitivity to harsh environmental conditions and electromagnetic interference. In the field, fiber optic thermometers have been used in recent snow cover studies as well as fluvial temperature profiling projects. The extended capabilities of CPT optical sensors open further possibilities for application in additional geologic realms requiring high temperature sensing in corrosive environments. Significant strides have been made in developing single-crystal sapphire based fiber optic sensing elements for high temperature environments which are otherwise difficult to instrument. Utilization of strain insensitive designs and optical sapphire materials allow for thermometers capable of operation above 1500°C with reduced sensitivity to chemical corrosion and mechanical interference. Current efforts in fabrication techniques are reducing the footprint of temperature sensors below the millimeter scale while maintaining high resolution and operating range. The FEI Helios 600 NanoLab workstation at the Virginia Tech Institute for Critical Technologies and Applied Science has been employed, providing the capabilities necessary to reduce the footprint of sensing elements to the dimensions of standard optical communication fiber using a Ga+ focused ion beam (FIB). The capability of semi-distributed multi-point sensing can also be accomplished at this scale using similar FIB milling techniques. The fiber optic thermometer designs resulting from these methods are compact, lightweight, and able to provide remote sensing without need for electrical power at the measurement point. These traits make them an ideal sensing platform for laboratory

Utilization rates of knee-arthroplasty in OECD countries.

PubMed

Pabinger, C; Lothaller, H; Geissler, A

2015-10-01

The number of knee arthroplasties and the prevalence of obesity are increasing exponentially. To date there have been no published reviews on utilization rates of knee arthroplasty in OECD countries. We analysed economic, medical and population data relating to knee arthroplasty surgeries performed in OECD countries. Gross domestic product (GDP), health expenditures, obesity prevalence, knee arthroplasty utilization rates and growth in knee arthroplasty rates per 100,000 population were assessed for total population, for patients aged 65 years and over, and patients aged 64 years and younger. Obesity prevalence and utilization of knee arthroplasty have increased significantly in the past. The mean utilization rate of knee arthroplasty was 150 (22-235) cases per 100,000 total population in 2011. The strongest annual increase (7%) occurred in patients 64 years and under. Differences between individual countries can be explained by economic and medical patterns, with countries with higher medical expenditures and obesity prevalence having significantly higher utilization rates. Countries with lower utilization rates have significantly higher growth in utilization rates. The future demand for knee prostheses will increase x-fold by 2030, with exact rates dependant upon economic, social and medical factors. We observed a 10-fold variation in the utilization of knee arthroplasty among OECD countries. A significant and strong correlation of GDP, health expenditures and obesity prevalence with utilization of knee arthroplasty was found. Patients aged 64 years and younger show a two-fold higher growth rate in knee arthroplasty compared to the older population. This trend could result in a four-fold demand for knee arthroplasty in OECD countries by 2030. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Cross-correlation limit of a SQUID-based noise thermometer of the pMFFT type

NASA Astrophysics Data System (ADS)

Kirste, A.; Engert, J.

2018-03-01

The primary magnetic field fluctuation thermometer (pMFFT) is a SQUID-based noise thermometer for temperatures below 1 K, which complies with metrological requirements. It combines two signal channels in order to apply the cross-correlation technique, but it requires statistically independent noise signals for proper operation. In order to check the limit of the cross-correlation readout, we have performed zero measurements in the millikelvin range in a setup that is identical to the pMFFT, except for the removed temperature sensor. We examined the influence of different parameters such as SQUID working point or flux-lock loop parameters on the minimum cross-correlation signal down to 24 mK and below 100 kHz. Depending on the configuration, typical minimum SQUID-referred cross-power spectral densities of 1.5 × 10‑15 Φ _0^2/Hz or even smaller values were observed. For the pMFFT, considering its thermal noise spectrum, these flux densities correspond to a device noise temperature of ≤2.5 µK, thereby ensuring a negligible uncertainty contribution at the lower end of the PLTS-2000 (0.9 mK).

Revision of OECD Guidelines for Genotoxicity Testing: Current Status and Next Steps

EPA Science Inventory

Over the past 30 years, assays have been developed to evaluate chemical genotoxicity. OECD Genotoxicity Test Guidelines (TG) describe assay procedures for regulatory safety testing. Since the last OECD TG revision (1997), there has been tremendous scientific and technological pro...

Classification of Educational Systems in OECD Member Countries: Canada, Greece, Yugoslavia.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

The present volume is one of a series intended to provide a comparative view of the educational systems of member countries of the Organisation for Economic Cooperation and Development (OECD). The purpose of the series is to assist OECD member countries in the development of their educational statistics and to provide a basis for the collection of…

Fiscal Rules and the Composition of Government Expenditures in OECD Countries

ERIC Educational Resources Information Center

Dahan, Momi; Strawczynski, Michel

2013-01-01

Since the 1990s many OECD countries have adopted fiscal rules. After the adoption of these rules, the ratio of social transfers to government consumption substantially declined, and it recovered following the global economic crisis. Using a sample of 22 OECD countries, we found a negative effect of fiscal rules on the ratio of social transfers to…

Teacher Evaluation: Current Practices in OECD Countries and a Literature Review. OECD Education Working Papers, No. 23

ERIC Educational Resources Information Center

Isore, Marlene

2009-01-01

This paper discusses the most relevant issues concerning teacher evaluation in primary and secondary education by reviewing the recent literature and analysing current practices within the OECD countries. First, it provides a conceptual framework highlighting key features of teacher evaluation schemes. In particular, it emphasises the importance…

Sensitivity and specificity of the Distress Impact Thermometer for the detection of psychological distress among CRC survivors.

PubMed

Craike, Melinda J; Livingston, Patricia M; Warne, Charles

2011-01-01

This study assessed the relative screening performance of the Distress Impact Thermometer (DIT) and cutoff levels with the established clinical case threshold of the Hospital Anxiety and Depression Scale (HADS) among a sample of colorectal cancer (CRC) survivors. Fifty-nine CRC survivors completed the DIT, HADS, and provided demographic information at baseline, and 45 of these patients completed the same measures at follow-up, giving a total of 104 participant data. Receiver operating characteristic (ROC) analysis was performed to determine the accuracy of the DIT compared to the HADS, with a cutoff score ≥8 on each HADS subscale (depression and anxiety) and ≥15 on the HADS total scale used to identify patients with psychological distress. The sample comprised slightly more males (63%) than females, with an average age of 59 years (SD = 9.53) and ranging from 33 to 77 years. The optimum DT cutoff score of ≥5 yielded a sensitivity of 60% and specificity of 86.1%; the area under the curve was 0.771 (95% confidence interval [CI] [0.646, 0.896]). For the depression subscale, the DT performed better on specificity than sensitivity, however the opposite was true for the anxiety subscale. The addition of an impact thermometer did not enhance screening performance. The results of this study provide support for a DT score of ≥5 for detecting psychological distress among CRC survivors and do not support the addition of an impact thermometer. The use of the DT might underestimate depression but overestimate anxiety.

Adjusting health expenditure for military spending and interest payment: Israel and the OECD countries.

PubMed

Shmueli, Amir; Israeli, Avi

2013-02-20

Compared to OECD countries, Israel has a remarkably low percentage of GDP and of government expenditure spent on health, which are not reflected in worse national outcomes. Israel is also characterized by a relatively high share of GDP spent on security expenses and payment of public debt. To determine to what extent differences between Israel and the OECD countries in security expenses and payment of the public debt might account for the gaps in the percentage of GDP and of government expenditures spent on health. We compare the percentages of GDP and of government expenditures spent on health in the OECD countries with the respective percentages when using primary civilian GDP and government expenditures (i.e., when security expenses and interest payment are deducted). We compared Israel with the OECD average and examined the ranking of the OECD countries under the two measures over time. While as a percentage of GDP, the national expenditure on health in Israel was well below the average of the OECD countries, as a percentage of primary civilian GDP it was above the average until 2003 and below the average thereafter. When the OECD countries were ranked according to decreasing percent of GDP and of government expenditure spent on health, adjusting for security and debt payment expenditures changed the Israeli rank from 23rd to 17th and from 27th to 25th, respectively. Adjusting for security expenditures and interest payment, Israel's low spending on health as a percentage of GDP and as a percentage of government's spending increases and is closer to the OECD average. Further analysis should explore the effect of additional population and macroeconomic differences on the remaining gaps.

Budgeting and Accounting in OECD Education Systems: A Literature Review. OECD Education Working Papers, No. 128

ERIC Educational Resources Information Center

Fakharzadeh, Tala

2016-01-01

Recent demographic, economic and political trends have drawn attention to the issue of effectiveness and efficiency in the use of resources in the education sector. In the context of the renewed interest for the optimisation of resource use, this paper attempts to review the literature on budgeting and accounting in OECD education systems. The…

Ratiometric near infrared luminescent thermometer based on lanthanide metal-organic frameworks

NASA Astrophysics Data System (ADS)

Yue, Dan; Zhang, Jun; Zhao, Dian; Lian, Xiusheng; Cui, Yuanjing; Yang, Yu; Qian, Guodong

2016-09-01

A near infrared luminescent MOFs thermometer (Nd0.676Yb0.324BTC) was prepared via a simple solvothermal method using Ln3+ (Ln=Nd, Yb) ions and 1, 3, 5-benznenetricarboxylic acid (H3BTC), and characterized by PXRD, TGA, ICP, and photoluminescence (PL) spectrum. These results indicate that the Nd0.676Yb0.324BTC displays high relative sensitivity and excellent repeatability in the physiological temperature range (288-323 K), and the maximum relative sensitivity is determined to be 1.187% K-1 at 323 K. These NIR luminescent MOFs may have potential applications in physiological temperature sensing.

An evaluation of a zero-heat-flux cutaneous thermometer in cardiac surgical patients.

PubMed

Eshraghi, Yashar; Nasr, Vivian; Parra-Sanchez, Ivan; Van Duren, Albert; Botham, Mark; Santoscoy, Thomas; Sessler, Daniel I

2014-09-01

Although core temperature can be measured invasively, there are currently no widely available, reliable, noninvasive thermometers for its measurement. We thus compared a prototype zero-heat-flux thermometer with simultaneous measurements from a pulmonary artery catheter. Specifically, we tested the hypothesis that zero-heat-flux temperatures are sufficiently accurate for routine clinical use. Core temperature was measured from the thermistor of a standard pulmonary artery catheter and with a prototype zero-heat-flux deep-tissue thermometer in 105 patients having nonemergent cardiac surgery. Zero-heat-flux probes were positioned on the lateral forehead and lateral neck. Skin surface temperature probes were attached to the forehead just adjacent to the zero-heat-flux probe. Temperatures were recorded at 1-minute intervals, excluding the period of cardiopulmonary bypass, and for the first 4 postoperative hours. Zero-heat-flux and pulmonary artery temperatures were compared with bias analysis; differences exceeding 0.5°C were considered to be potentially clinically important. The mean duration in the operating room was 279 ± 75 minutes, and the mean cross-clamp time was 118 ± 50 minutes. All subjects were monitored for an additional 4 hours in the intensive care unit. The average overall difference between forehead zero-heat-flux and pulmonary artery temperatures (i.e., forehead minus pulmonary artery) was -0.23°C (95% limits of agreement of ±0.82); 78% of the differences were ≤0.5°C. The average intraoperative temperature difference was -0.08°C (95% limits of agreement of ±0.88); 84% of the differences were ≤0.5°C. The average postoperative difference was -0.32°C (95% limits of agreement of ±0.75); 84% of the differences were ≤0.5°C. Bias and precision values for neck site were similar to the forehead values. Uncorrected forehead skin temperature showed an increasing negative bias as core temperature decreased. Core temperature can be noninvasively

Parent-Child Agreement Using the Spence Children's Anxiety Scale and a Thermometer in Children with Autism Spectrum Disorder

PubMed Central

May, T.; Cornish, K.; Rinehart, N. J.

2015-01-01

Children with Autism Spectrum Disorder (ASD) experience high anxiety which often prompts clinical referral and requires intervention. This study aimed to compare parent and child reports on the Spence Children's Anxiety Scale (SCAS) and a child-reported “worry thermometer” in 88 children aged 8–13 years, 44 with ASD and 44 age, gender, and perceptual IQ matched typically developing children. There were no gender differences in child report on the SCAS and worry thermometers. Results indicated generally good correlations between parent and child self-reported SCAS symptoms for typically developing children but poor agreement in parent-child ASD dyads. The worry thermometer child-report did not reflect child or parent reports on the SCAS. Findings suggest 8–13-year-old children with ASD may have difficulties accurately reporting their anxiety levels. The clinical implications were discussed. PMID:25922765

Impact, regulation and health policy implications of physician migration in OECD countries

PubMed Central

Forcier, Mélanie Bourassa; Simoens, Steven; Giuffrida, Antonio

2004-01-01

Background In the face of rising demand for medical services due to ageing populations, physician migration flows are increasingly affecting the supply of physicians in Organisation for Economic Co-operation and development (OECD) countries. This paper offers an integrated perspective on the impact of physician migration on home and host countries and discusses international regulation and policy approaches governing physician migration. Methods Information about migration flows, international regulation and policies governing physician migration were derived from two questionnaires sent to OECD countries, a secondary analysis of EUROSTAT Labour Force Surveys, a literature review and official policy documents of OECD countries. Results OECD countries increasingly perceive immigration of foreign physicians as a way of sustaining their physician workforce. As a result, countries have entered into international agreements regulating physician migration, although their success has been limited due to the imposition of licensing requirements and the protection of vested interests by domestic physicians. OECD countries have therefore adopted specific policies designed to stimulate the immigration of foreign physicians, whilst minimising its negative impact on the home country. Measures promoting immigration have included international recruitment campaigns, less strict immigration requirements and arrangements that foster shared learning between health care systems. Policies restricting the societal costs of physician emigration from developing countries such as good practice guidelines and taxes on host countries have not yet produced their expected effect or in some cases have not been established at all. Conclusions Although OECD countries generally favour long-term policies of national self-sufficiency to sustain their physician workforce, such policies usually co-exist with short-term or medium-term policies to attract foreign physicians. As this is likely to

Method for in-situ restoration of plantinum resistance thermometer calibration

DOEpatents

Carroll, Radford M.

1989-01-01

A method is provided for in-situ restoration of platinum resistance thermometers (PRT's) that have undergone surface oxide contamination and/or strain-related damage causing decalibration. The method, which may be automated using a programmed computer control arrangement, consists of applying a dc heating current to the resistive sensing element of the PRT of sufficient magnitude to heat the element to an annealing temperature and maintaining the temperature for a specified period to restore the element to a stress-free calibration condition. The process anneals the sensing element of the PRT without subjecting the entire PRT assembly to the annealing temperature and may be used in the periodic maintenance of installed PRT's.

Method for in-situ restoration of platinum resistance thermometer calibration

DOEpatents

Carroll, R.M.

1987-10-23

A method is provided for in-situ restoration of platinum resistance thermometers (PRT's) that have undergone surface oxide contamination and/or stain-related damage causing decalibration. The method, which may be automated using a programmed computer control arrangement, consists of applying a dc heating current to the resistive sensing element of the PRT of sufficient magnitude to heat the element to an annealing temperature and maintaining the temperature for a specified period to restore the element to a stress-free calibration condition. The process anneals the sensing element of the PRT without subjecting the entire PRT assembly to the annealing temperature and may be used in the periodic maintenance of installed PRT's. 1 fig.

Use of infrared emission detection thermometer in Chinese neonates.

PubMed

Ng, D K; Liu, Y S; Ho, J C

1999-07-01

To evaluate the reproducibility of Thermoscan, an infrared emission detection ear thermometer, and to establish the normal reference range of ear temperature in Chinese neonates. Neonates were recruited from the inpatients population with exclusion of those suffering from infections. Forty-nine neonates were recruited with 1,115 temperature taking sessions. Mean left ear temperature was 36.64 degrees C +/- 0.35 degree C. Mean right ear temperature was 36.64 degrees C +/- 0.37 degree C. Clinical repeatability for left and right ear was 0.17 degree C and 0.17 degree C, respectively. Thermoscan produced reproducible results in Chinese neonates. The normal range of ear temperature for Chinese neonates is 35 degrees C to 37 degrees C. Ear temperature > 37.8 degrees C should be regarded as fever.

Adjusting health expenditure for military spending and interest payment: Israel and the OECD countries

PubMed Central

2013-01-01

Background Compared to OECD countries, Israel has a remarkably low percentage of GDP and of government expenditure spent on health, which are not reflected in worse national outcomes. Israel is also characterized by a relatively high share of GDP spent on security expenses and payment of public debt. Objectives To determine to what extent differences between Israel and the OECD countries in security expenses and payment of the public debt might account for the gaps in the percentage of GDP and of government expenditures spent on health. Methods We compare the percentages of GDP and of government expenditures spent on health in the OECD countries with the respective percentages when using primary civilian GDP and government expenditures (i.e., when security expenses and interest payment are deducted). We compared Israel with the OECD average and examined the ranking of the OECD countries under the two measures over time. Results While as a percentage of GDP, the national expenditure on health in Israel was well below the average of the OECD countries, as a percentage of primary civilian GDP it was above the average until 2003 and below the average thereafter. When the OECD countries were ranked according to decreasing percent of GDP and of government expenditure spent on health, adjusting for security and debt payment expenditures changed the Israeli rank from 23rd to 17th and from 27th to 25th, respectively. Conclusions Adjusting for security expenditures and interest payment, Israel's low spending on health as a percentage of GDP and as a percentage of government's spending increases and is closer to the OECD average. Further analysis should explore the effect of additional population and macroeconomic differences on the remaining gaps. PMID:23425013

Decomposing Achievement Gaps among OECD Countries

ERIC Educational Resources Information Center

Zhang, Liang; Lee, Kristen A.

2011-01-01

In this study, we use decomposition methods on PISA 2006 data to compare student academic performance across OECD countries. We first establish an empirical model to explain the variation in academic performance across individuals, and then use the Oaxaca-Blinder decomposition method to decompose the achievement gap between each of the OECD…

Benchmarking health IT among OECD countries: better data for better policy

PubMed Central

Adler-Milstein, Julia; Ronchi, Elettra; Cohen, Genna R; Winn, Laura A Pannella; Jha, Ashish K

2014-01-01

Objective To develop benchmark measures of health information and communication technology (ICT) use to facilitate cross-country comparisons and learning. Materials and methods The effort is led by the Organisation for Economic Co-operation and Development (OECD). Approaches to definition and measurement within four ICT domains were compared across seven OECD countries in order to identify functionalities in each domain. These informed a set of functionality-based benchmark measures, which were refined in collaboration with representatives from more than 20 OECD and non-OECD countries. We report on progress to date and remaining work to enable countries to begin to collect benchmark data. Results The four benchmarking domains include provider-centric electronic record, patient-centric electronic record, health information exchange, and tele-health. There was broad agreement on functionalities in the provider-centric electronic record domain (eg, entry of core patient data, decision support), and less agreement in the other three domains in which country representatives worked to select benchmark functionalities. Discussion Many countries are working to implement ICTs to improve healthcare system performance. Although many countries are looking to others as potential models, the lack of consistent terminology and approach has made cross-national comparisons and learning difficult. Conclusions As countries develop and implement strategies to increase the use of ICTs to promote health goals, there is a historic opportunity to enable cross-country learning. To facilitate this learning and reduce the chances that individual countries flounder, a common understanding of health ICT adoption and use is needed. The OECD-led benchmarking process is a crucial step towards achieving this. PMID:23721983

Benchmarking health IT among OECD countries: better data for better policy.

PubMed

Adler-Milstein, Julia; Ronchi, Elettra; Cohen, Genna R; Winn, Laura A Pannella; Jha, Ashish K

2014-01-01

To develop benchmark measures of health information and communication technology (ICT) use to facilitate cross-country comparisons and learning. The effort is led by the Organisation for Economic Co-operation and Development (OECD). Approaches to definition and measurement within four ICT domains were compared across seven OECD countries in order to identify functionalities in each domain. These informed a set of functionality-based benchmark measures, which were refined in collaboration with representatives from more than 20 OECD and non-OECD countries. We report on progress to date and remaining work to enable countries to begin to collect benchmark data. The four benchmarking domains include provider-centric electronic record, patient-centric electronic record, health information exchange, and tele-health. There was broad agreement on functionalities in the provider-centric electronic record domain (eg, entry of core patient data, decision support), and less agreement in the other three domains in which country representatives worked to select benchmark functionalities. Many countries are working to implement ICTs to improve healthcare system performance. Although many countries are looking to others as potential models, the lack of consistent terminology and approach has made cross-national comparisons and learning difficult. As countries develop and implement strategies to increase the use of ICTs to promote health goals, there is a historic opportunity to enable cross-country learning. To facilitate this learning and reduce the chances that individual countries flounder, a common understanding of health ICT adoption and use is needed. The OECD-led benchmarking process is a crucial step towards achieving this.

Labour Market Performance, Income Inequality and Poverty in OECD Countries. OECD Economics Department Working Papers, No. 500

ERIC Educational Resources Information Center

Burniaux, Jean-Marc; Padrini, Flavio; Brandt, Nicola

2006-01-01

There have been concerns that employment-enhancing reforms along the lines of the 1994 OECD Jobs Strategy could inadvertently lead to increased income inequality and poverty. This paper focuses on the impact of institutions and redistributive policies on inequality and poverty with the view of assessing whether a trade-off between better labour…

Policy Coherence towards East Asia: Development Challenges for OECD Countries. OECD Development Centre Policy Brief No. 26

ERIC Educational Resources Information Center

Fukasaku, K.; Kawai, M.; Plummer, M. G.; Trzeciak-Duval, A.

2005-01-01

Coherence issues drawn from specific country and regional cases can provide the most concrete information on the development implications of OECD-country policies. A first regional case study focused on East Asia, with financial support from the Policy Research Institute of the Japanese Ministry of Finance. The links between the region's…

Student Learning Time: A Literature Review. OECD Education Working Papers, No. 127

ERIC Educational Resources Information Center

Gromada, Anna; Shewbridge, Claire

2016-01-01

This paper examines student learning time as a key educational resource. It presents an overview of how different OECD countries allocate instruction time. It also develops a model to understand the effective use of allocated instruction time and examines how different OECD countries compare on this. The paper confirms the value of sufficient…

Energy Use and Carbon Emissions: Non-OECD Countries

EIA Publications

1994-01-01

Presents world energy use and carbon emissions patterns, with particular emphasis on the non-OECD (Organization for Economic Cooperation and Development) countries (including the current and former centrally planned economies).

OECD Reviews of School Resources: Lithuania

ERIC Educational Resources Information Center

Shewbridge, Claire; Godfrey, Katrina; Hermann, Zoltán; Nusche, Deborah

2016-01-01

This report for Lithuania forms part of the OECD Review of Policies to Improve the Effectiveness of Resource Use in Schools. The purpose of the review is to explore how school resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. School resources are understood in a broad…

OECD Work on Future Educational Environments

ERIC Educational Resources Information Center

Theisens, Henno; Benavides, Francisco; Dumont, Hanna

2008-01-01

Designing school buildings to respond to change is not a new idea. But perhaps what is different today is the kind and degree of change which we have to anticipate. The OECD is carrying out projects that can help in the planning and design of future educational facilities--exploring trends in education and studying innovative learning…

OECD Reviews of School Resources: Estonia

ERIC Educational Resources Information Center

Santiago, Paulo; Levitas, Anthony; Radó, Péter; Shewbridge, Claire

2016-01-01

This report for Estonia forms part of the OECD Review of Policies to Improve the Effectiveness of Resource Use in Schools. The purpose of the review is to explore how school resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. School resources are understood in a broad way,…

OECD Skills Outlook 2013: First Results from the Survey of Adult Skills

ERIC Educational Resources Information Center

OECD Publishing, 2013

2013-01-01

This first "OECD Skills Outlook" presents the initial results of the Survey of Adult Skills (PIAAC), which evaluates the skills of adults in 22 OECD member countries and two partner countries. The PIAAC survey was designed to provide insights into the availability of some key skills and how they are used at work and at home through the…

A Framework for Monitoring Transition Systems. OECD Education Working Papers, No. 20

ERIC Educational Resources Information Center

van der Velden, Rolf K.; Wolbers, Maarten H.

2008-01-01

With its publication of the Thematic Review on the Transition from Initial Education to Working Life in 2000, OECD has laid the foundation for the development of indicators regarding the transition from education to work. One of the core activities of OECD's Network B in 2005 and 2006 was to further develop these indicators by establishing a…

Changing the Subject: The Challenge to Teacher Professionalism of Innovation in OECD Countries.

ERIC Educational Resources Information Center

Olson, John; James, Edwyn; Lang, Manfred

The Organization for Economic Cooperation and Development (OECD) study, "Innovations in Science, Mathematics and Technology Education" (SMTE), documents 23 projects aimed at enhancing the appeal of science, mathematics, and technology education. The projects began in 13 OECD countries that believed that curricula must be more…

Performance of Magnetic Penetration Thermometers for X-Ray Astronomy

NASA Technical Reports Server (NTRS)

Nagler, P. C.; Adams, J. S.; Balvin, M. A.; Bandler, S. R.; Denis, K. L.; Hsieh, W. T.; Kelly, D. P.; Porst, J. P.; Sadleir, J. E.; Seidel, G. M.;

Income inequality and obesity prevalence among OECD countries.

PubMed

Su, Dejun; Esqueda, Omar A; Li, Lifeng; Pagán, José A

2012-07-01

Using recent pooled data from the World Health Organization Global Infobase and the World Factbook compiled by the Central Intelligence Agency of the United States, this study assesses the relation between income inequality and obesity prevalence among 31 OECD countries through a series of bivariate and multivariate linear regressions. The United States and Mexico well lead OECD countries in both obesity prevalence and income inequality. A sensitivity analysis suggests that the inclusion or exclusion of these two extreme cases can fundamentally change the findings. When the two countries are included, the results reveal a positive correlation between income inequality and obesity prevalence. This correlation is more salient among females than among males. Income inequality alone is associated with 16% and 35% of the variations in male and female obesity rates, respectively, across OECD countries in 2010. Higher levels of income inequality in the 2005-2010 period were associated with a more rapid increase in obesity prevalence from 2002 to 2010. These associations, however, virtually disappear when the US and Mexico have been excluded from the analysis. Findings from this study underscore the importance of assessing the impact of extreme cases on the relation between income inequality and health outcomes. The potential pathways from income inequality to the alarmingly high rates of obesity in the cases of the US and Mexico warrant further research.

Educating Students with Special Needs: A Comparison of Inclusion Practices in OECD Countries

ERIC Educational Resources Information Center

Evans, Peter

2004-01-01

This article describes the differences and similarities among some OECD (Organisation for Economic Co-operation and Development) countries in educating special needs students. Although there are large differences in the type of provision made, when the process of inclusion is examined, there are more similarities than differences. OECD countries…

Bridging across OECD 308 and 309 Data in Search of a Robust Biotransformation Indicator.

PubMed

Honti, Mark; Hahn, Stefan; Hennecke, Dieter; Junker, Thomas; Shrestha, Prasit; Fenner, Kathrin

2016-07-05

The OECD guidelines 308 and 309 define simulation tests aimed at assessing biotransformation of chemicals in water-sediment systems. They should serve the estimation of persistence indicators for hazard assessment and half-lives for exposure modeling. Although dissipation half-lives of the parent compound are directly extractable from OECD 308 data, they are system-specific and mix up phase transfer with biotransformation. In contrast, aerobic biotransformation half-lives should be easier to extract from OECD 309 experiments with suspended sediments. Therefore, there is scope for OECD 309 tests with suspended sediment to serve as a proxy for degradation in the aerobic phase of the more complicated OECD 308 test, but that correspondence has remained untested so far. Our aim was to find a way to extract biotransformation rate constants that are universally valid across variants of water-sediment systems and, hence, provide a more general description of the compound's behavior in the environment. We developed a unified model that was able to simulate four experimental types (two variants of OECD 308 and two variants of OECD 309) for three compounds by using a biomass-corrected, generalized aerobic biotransformation parameter (k'bio). We used Bayesian calibration and uncertainty assessment to calibrate the models for individual experimental types separately and for combinations of experimental types. The results suggested that k'bio was a generally valid parameter for quantifying biotransformation across systems. However, its uncertainty remained significant when calibrated on individual systems alone. Using at least two different experimental types for the calibration of k'bio increased its robustness by clearly separating degradation from the phase-transfer processes taking place in the individual systems. Overall, k'bio has the potential to serve as a system-independent descriptor of aerobic biotransformation at the water-sediment interface that is equally and

Revision of the OECD Genetox Test Guidelines

EPA Science Inventory

The OECD Test Guidelines (TG) on genetic toxicology were initially prepared and adopted between 1981 and 1986. In 1997 the most commonly used guidelines were updated, and the in vivo UDS test (TG 486) was added. More recently, in 2010 and 2011, two new guidelines were adopted: th...

OECD Skills Strategy Diagnostic Report: Italy 2017

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

Skills demands are increasing and changing rapidly everywhere, as advanced economies adapt to globalisation, technological change and ageing. Yet Italy is struggling more than other advanced economies to make the transition towards a thriving and dynamic skills-based society. The Organisation for Economic Cooperation and Development (OECD) Skills…

Education at a Glance 2015: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing, 2015

2015-01-01

"Education at a Glance: OECD Indicators" is the authoritative source for accurate information on the state of education around the world. It provides data on the output of educational institutions; the impact of learning across countries; the financial and human resources invested in education; access, participation and progression in…

Application of Monte Carlo Method for Evaluation of Uncertainties of ITS-90 by Standard Platinum Resistance Thermometer

NASA Astrophysics Data System (ADS)

Palenčár, Rudolf; Sopkuliak, Peter; Palenčár, Jakub; Ďuriš, Stanislav; Suroviak, Emil; Halaj, Martin

2017-06-01

Evaluation of uncertainties of the temperature measurement by standard platinum resistance thermometer calibrated at the defining fixed points according to ITS-90 is a problem that can be solved in different ways. The paper presents a procedure based on the propagation of distributions using the Monte Carlo method. The procedure employs generation of pseudo-random numbers for the input variables of resistances at the defining fixed points, supposing the multivariate Gaussian distribution for input quantities. This allows taking into account the correlations among resistances at the defining fixed points. Assumption of Gaussian probability density function is acceptable, with respect to the several sources of uncertainties of resistances. In the case of uncorrelated resistances at the defining fixed points, the method is applicable to any probability density function. Validation of the law of propagation of uncertainty using the Monte Carlo method is presented on the example of specific data for 25 Ω standard platinum resistance thermometer in the temperature range from 0 to 660 °C. Using this example, we demonstrate suitability of the method by validation of its results.

Changing Patterns of Finance in Higher Education. Country Study: Japan. OECD Educational Monographs.

ERIC Educational Resources Information Center

Kaneko, Motohisa

This report is one in a series of country studies prepared in the framework of the Organisation for Economic Cooperation and Development (OECD) Education Committee activity on changing patterns of finance in higher education. In order to contribute to the OECD activity from the Japanese perspective, the Research Institute for Higher Education at…

The OECD and the Local: PISA-Based Test for Schools in the USA

ERIC Educational Resources Information Center

Rutkowski, David

2015-01-01

The Organization for Economic Cooperation and Development (OECD) has recently piloted the Program for International Student Assessment (PISA)-based Test for Schools in the USA. In this paper, I contend that by connecting directly with local school boards this new initiative has the potential to further promote the OECD's educational agenda in…

PISA for Schools: Topological Rationality and New Spaces of the OECD's Global Educational

ERIC Educational Resources Information Center

Lewis, Steven; Sellar, Sam; Lingard, Bob

2016-01-01

This article examines the OECD's new PISA-based Test for Schools ("PISA for Schools") program. PISA for Schools is part of the expanding education work of the OECD, building upon main PISA to enable school-to-schooling system comparisons. We examine the development of PISA for Schools, the nature of the instrument, and some initial…

Sphygmomanometers and thermometers as potential fomites of Staphylococcus haemolyticus: biofilm formation in the presence of antibiotics.

PubMed

Sued, Bruna Pinto Ribeiro; Pereira, Paula Marcele Afonso; Faria, Yuri Vieira; Ramos, Juliana Nunes; Binatti, Vanessa Batista; Santos, Kátia Regina Netto Dos; Seabra, Sérgio Henrique; Hirata, Raphael; Vieira, Verônica Viana; Mattos-Guaraldi, Ana Luíza; Pereira, José Augusto Adler

2017-03-01

The association between Staphylococcus haemolyticus and severe nosocomial infections is increasing. However, the extent to which fomites contribute to the dissemination of this pathogen through patients and hospital wards remains unknown. In the present study, sphygmomanometers and thermometers were evaluated as potential fomites of oxacillin-resistant S. haemolyticus (ORSH). The influence of oxacillin and vancomycin on biofilm formation by ORSH strains isolated from fomites was also investigated. The presence of ORSH on swabs taken from fomite surfaces in a Brazilian hospital was assessed using standard microbiological procedures. Antibiotic susceptibility profiles were determined by the disk diffusion method, and clonal distribution was assessed in pulsed-field gel electrophoresis (PFGE) assays. Minimum inhibitory concentrations (MICs) of oxacillin and vancomycin were evaluated via the broth microdilution method. Polymerase chain reaction (PCR) assays were performed to detect the mecA and icaAD genes. ORSH strains grown in media containing 1/4 MIC of vancomycin or oxacillin were investigated for slime production and biofilm formation on glass, polystyrene and polyurethane catheter surfaces. ORSH strains comprising five distinct PFGE types were isolated from sphygmomanometers (n = 5) and a thermometer (n = 1) used in intensive care units and surgical wards. ORSH strains isolated from fomites showed susceptibility to only linezolid and vancomycin and were characterised as multi-drug resistant (MDR). Slime production, biofilm formation and the survival of sessile bacteria differed and were independent of the presence of the icaAD and mecA genes, PFGE type and subtype. Vancomycin and oxacillin did not inhibit biofilm formation by vancomycin-susceptible ORSH strains on abiotic surfaces, including on the catheter surface. Enhanced biofilm formation was observed in some situations. Moreover, a sub-lethal dose of vancomycin induced biofilm formation by an ORSH strain on

Sphygmomanometers and thermometers as potential fomites of Staphylococcus haemolyticus: biofilm formation in the presence of antibiotics

PubMed Central

Sued, Bruna Pinto Ribeiro; Pereira, Paula Marcele Afonso; Faria, Yuri Vieira; Ramos, Juliana Nunes; Binatti, Vanessa Batista; dos Santos, Kátia Regina Netto; Seabra, Sérgio Henrique; Hirata, Raphael; Vieira, Verônica Viana; Mattos-Guaraldi, Ana Luíza; Pereira, José Augusto Adler

2017-01-01

BACKGROUND The association between Staphylococcus haemolyticus and severe nosocomial infections is increasing. However, the extent to which fomites contribute to the dissemination of this pathogen through patients and hospital wards remains unknown. OBJECTIVES In the present study, sphygmomanometers and thermometers were evaluated as potential fomites of oxacillin-resistant S. haemolyticus (ORSH). The influence of oxacillin and vancomycin on biofilm formation by ORSH strains isolated from fomites was also investigated. METHODS The presence of ORSH on swabs taken from fomite surfaces in a Brazilian hospital was assessed using standard microbiological procedures. Antibiotic susceptibility profiles were determined by the disk diffusion method, and clonal distribution was assessed in pulsed-field gel electrophoresis (PFGE) assays. Minimum inhibitory concentrations (MICs) of oxacillin and vancomycin were evaluated via the broth microdilution method. Polymerase chain reaction (PCR) assays were performed to detect the mecA and icaAD genes. ORSH strains grown in media containing 1/4 MIC of vancomycin or oxacillin were investigated for slime production and biofilm formation on glass, polystyrene and polyurethane catheter surfaces. FINDINGS ORSH strains comprising five distinct PFGE types were isolated from sphygmomanometers (n = 5) and a thermometer (n = 1) used in intensive care units and surgical wards. ORSH strains isolated from fomites showed susceptibility to only linezolid and vancomycin and were characterised as multi-drug resistant (MDR). Slime production, biofilm formation and the survival of sessile bacteria differed and were independent of the presence of the icaAD and mecA genes, PFGE type and subtype. Vancomycin and oxacillin did not inhibit biofilm formation by vancomycin-susceptible ORSH strains on abiotic surfaces, including on the catheter surface. Enhanced biofilm formation was observed in some situations. Moreover, a sub-lethal dose of vancomycin induced

Education at a Glance 2017: OECD Indicators

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

"Education at a Glance: OECD Indicators" is the authoritative source for information on the state of education around the world. With more than 125 charts and 145 tables included in the publication and much more data available on the educational database, "Education at a Glance 2017" provides key information on the output of…

OECD Work on Technology and Education: Innovative Learning Environments as an Integrating Framework

ERIC Educational Resources Information Center

Istance, David; Kools, Marco

2013-01-01

This article presents in summary a selection of the work conducted by OECD in the field of technology and education, which has been an on-going focus of OECD work since the 1980s. Recently, much of this has been under the heading of "New Millennium Learners", but it has also included the widening of student achievement surveys towards…

School-to-Work Transitions in the OECD: Do Education Systems Make a Difference?

ERIC Educational Resources Information Center

Karmel, Tom

2017-01-01

High unemployment among the young is a concern in many OECD countries. A key issue for policy makers is whether the education system has a role to play in assisting the transition from education to work or whether economic issues dominate. This paper uses OECD country-level data to see whether the structure of countries' education systems,…

Reporting and use of the OECD Health Care Quality Indicators at national and regional level in 15 countries.

PubMed

Rotar, Alexandru M; van den Berg, Michael J; Kringos, Dionne S; Klazinga, Niek S

2016-06-01

OECD member states are involved since 2003 in a project coordinated by the OECD on Health Care Quality Indicators (HCQI). All OECD countries are biennially requested by the OECD to deliver national data on the quality indicators for international benchmarking purposes. Currently, there is no knowledge whether the OECD HCQI information is used by the countries themselves for healthcare system accountability and improvement purposes. The objective of the study is to explore the reporting and use of OECD HCQI in OECD member-states. Data were collected through a questionnaire sent to all OECD member-states containing factual questions on the reporting on all OECD HCQ-indicators. Responses were received between June and December 2014. In this timeframe, two reminders were sent to the participants. The work progress was presented during HCQI Meetings in November 2014 and May 2015. Fifteen countries reported to have a total of 163 reports in which one or more HCQIs were reported. One hundred and sixteen were national and 47 were regional reports. Forty-nine reports had a general system focus, 80 were disease specific, 10 referred to a specific type of care setting, 22 were thematic and 2 were a combination of two (disease specific for a particular type of care and thematic for a specific type of care). Most reports were from Canada: 49. All 15 countries use one or more OECD indicators. The OECD quality indicators have acquired a clear place in national and regional monitoring activities. Some indicators are reported more often than others. These differences partly reflect differences between healthcare systems. Whereas some indicators have become very common, such as cancer care indicators, others, such as mental healthcare and patient experience indicators are relatively new and require some more time to be adopted more widely. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights

Convergence and determinants of health expenditures in OECD countries.

PubMed

Nghiem, Son Hong; Connelly, Luke Brian

2017-08-17

This study examines the trend and determinants of health expenditures in OECD countries over the 1975-2004 period. Based on recent developments in the economic growth literature we propose and test the hypothesis that health care expenditures in countries of similar economic development level may converge. We hypothesise that the main drivers for growth in health care costs include: aging population, technological progress and health insurance. The results reveal no evidence that health expenditures among OECD countries converge. Nevertheless, there is evidence of convergence among three sub-groups of countries. We found that the main driver of health expenditure is technological progress. Our results also suggest that health care is a (national) necessity, not a luxury good as some other studies in this field have found.

OECD Reviews of School Resources: Austria 2016

ERIC Educational Resources Information Center

Nusche, Deborah; Radinger, Thomas; Busemeyer, Marius R.; Theisens, Henno

2016-01-01

This report for Austria forms part of the Organisation for Economic Cooperation and Development (OECD) Review of Policies to Improve the Effectiveness of Resource Use in Schools. The purpose of the review is to explore how school resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school…

Education at OECD: Recent Themes and Recommendations

ERIC Educational Resources Information Center

Istance, David

2011-01-01

The aim of this article is to provide an introduction to the work of OECD in the field of education through its recent projects and reports. It makes no pretence to be exhaustive. It relies heavily on published results of international reviews and comparisons where relatively clear messages have been identified, rather than single country…

Local lymph node assay: how testing laboratories apply OECD TG 429 for REACH purposes.

PubMed

Rovida, Costanza

2011-01-01

The Local Lymph Node Assay (LLNA) is the official method for assessing the allergic contact dermatitis potential of chemicals for the purposes of REACH regulation. The LLNA went through a validation process that allowed the delineation of a robust protocol for performing new tests. The OECD accepted this method in 2002 and published OECD TG 429. The European Chemical Agency (ECHA) recently published data that were submitted in the registration dossiers of chemicals. This database was analysed to determine how testing laboratories apply OECD TG 429. This analysis comes after a detailed analysis of four full study reports that were also prepared for REACH purposes. Although the majority of the tests are fully compliant with OECD TG 429, some showed major deviations, and a number of others used more animals than necessary. This suggests that in vivo tests need to be planned more carefully and consciously to obtain meaningful results with the minimum animal number necessary.

Financial impact of the GFC: health care spending across the OECD.

PubMed

Morgan, David; Astolfi, Roberto

2015-01-01

Since the onset of the global financial crisis (GFC), health spending has slowed markedly or fallen in many OECD countries after years of continuous growth. However, health spending patterns across the 34 countries of the OECD have been affected to varying degrees. This article examines in more detail the observed downturn in health expenditure growth, analysing which countries and which sectors of health spending have been most affected. In addition, using more recent preliminary data for a subset of countries, this article tries to shed light on the prospects for health spending trends. Given that public sources account for around three-quarters of total spending on health on average across the OECD, and, in an overall context of managing public deficits, the article focuses on the specific areas of public spending that have been most affected. This study also tries to link the observed trends with some of the main policy measures and instruments put in place by countries. The investigation finds that while nearly all OECD countries have seen health spending growth decrease since 2009, there is wide variation as to the extent of the slowdown, with some countries outside of Europe continuing to see significant growth in health spending. While all sectors of spending appear to have been affected, initial analysis appears to show the greatest decreases has been experienced in pharmaceutical spending and in areas of public health and prevention.

Association between economic fluctuations and road mortality in OECD countries.

PubMed

Chen, Gang

2014-08-01

Using longitudinal data from 32 Organization for Economic Co-operation and Development (OECD) countries (1970-2010), this article investigates association between annual variations in road mortality and the economic fluctuations. Two regression models (fixed-effects and random-coefficients) were adopted for estimation. The cross-country data analyses suggested that road mortality is pro-cyclical and that the cyclicality is symmetric. Based on data from 32 OECD countries, an increase of on average 1% in economic growth is associated with a 1.1% increase in road mortality, and vice versa. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Digital Broadband Content: Digital Content Strategies and policies. OECD Digital Economy Papers, No. 119

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2006

2006-01-01

The development of digital content raises new issues as rapid technological developments challenge existing business models and government policies. This OECD study identifies and discusses six groups of business and public policy issues and illustrates these with existing and potential OECD Digital Content Strategies and Policies: (1) Innovation…

Adult Basic Skills in OECD Countries: Policy Issues and a Research Agenda. OECD/NCAL International Paper IP94-01.

ERIC Educational Resources Information Center

Stern, David; Tuijnman, Albert

In light of the transition from a labor- to a knowledge-intensive economic system, member countries of the Organization for Economic Cooperation and Development (OECD) seem to have little choice but to increase the efficient allocation of both the quality and flow of knowledge and literacy skills. To reduce risks and counter the factors that…

OECD Reviews of School Resources: Slovak Republic

ERIC Educational Resources Information Center

Santiago, Paulo; Halász, Gábor; Levacic, Rosalind; Shewbridge, Claire

2016-01-01

This report for the Slovak Republic forms part of the OECD Review of Policies to Improve the Effectiveness of Resource Use in Schools. The purpose of the Review is to explore how school resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. School resources are understood in…

Improved estimates of Belgian private health expenditure can give important lessons to other OECD countries.

PubMed

Calcoen, Piet; Moens, Dirk; Verlinden, Pieter; van de Ven, Wynand P M M; Pacolet, Jozef

2015-03-01

OECD Health Data are a well-known source for detailed information about health expenditure. These data enable us to analyze health policy issues over time and in comparison with other countries. However, current official Belgian estimates of private expenditure (as published in the OECD Health Data) have proven not to be reliable. We distinguish four potential major sources of problems with estimating private health spending: interpretation of definitions, formulation of assumptions, missing or incomplete data and incorrect data. Using alternative sources of billing information, we have reached more accurate estimates of private and out-of-pocket expenditure. For Belgium we found differences of more than 100% between our estimates and the official Belgian estimates of private health expenditure (as published in the OECD Health Data). For instance, according to OECD Health Data private expenditure on hospitals in Belgium amounts to €3.1 billion, while according to our alternative calculations these expenses represent only €1.1 billion. Total private expenditure differs only 1%, but this is a mere coincidence. This exercise may be of interest to other OECD countries looking to improve their estimates of private expenditure on health. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Bloch-Nordsieck thermometers: one-loop exponentiation in finite temperature QED

NASA Astrophysics Data System (ADS)

Gupta, Sourendu; Indumathi, D.; Mathews, Prakash; Ravindran, V.

1996-02-01

We study the scattering of hard external particles in a heat bath in a real-time formalism for finite temperature QED. We investigate the distribution of the 4-momentum difference of initial and final hard particles in a fully covariant manner when the scale of the process, Q, is much larger than the temperature, T. Our computations are valid for all T subject to this constraint. We exponentiate the leading infra-red term at one-loop order through a resummation of soft (thermal) photon emissions and absorptions. For T > 0, we find that tensor structures arise which are not present at T = 0. These cant' thermal signatures. As a result, external particles can serve as thermometers introduced into the heat bath. We investigate the phase space origin of log( Q/ m) and log ( Q/ T) teens.

Measurement of body temperature in 300 dogs with a novel noncontact infrared thermometer on the cornea in comparison to a standard rectal digital thermometer.

PubMed

Kreissl, Hannah; Neiger, Reto

2015-01-01

To assess the accuracy of obtaining body temperatures in dogs with a noncontact infrared thermometer (NCIT) on the cornea compared with a rectal digital thermometer (RDT). Prospective single center study. University teaching hospital. Three hundred dogs presented with low, normal, or high body temperatures. Three body temperature readings were measured by an RDT and by an NCIT on the cornea of the left eye by 2 investigators (experienced and inexperienced). Results obtained by the 2 methods were compared. Median body temperature measured by the experienced investigator with the RDT and the NCIT were 38.3°C (range 35.5°C-41.1°C; 95% CI: 38.2-38.4°C) and 37.7°C (35.9°C-40.1°C; 95% CI: 37.7°C-37.9°C), respectively. Measurement of RDT as well as of NCIT correlated well between both investigators (rRDT = 0.94; rNCIT = 0.82; respectively, P < 0.001 for both methods). Mean RDT and NCIT-temperature correlated poorly (r = 0.43; P < 0.001) when taken by the experienced investigator and even less by the nonexperienced investigator (r = 0.38; P < 0.001). Repeatability of the NCIT revealed an unsatisfactory value (0.24°C) compared to RDT measurement (0.12°C). Agreement between both devices in measuring low, normal, and high values, calculated by Cohens-Kappa, was unsatisfactory (к = 0.201; P < 0.001). Calculating the receiver operating characteristic curve to determine the best threshold for fever (defined as RDT temperature >39.0°C) showed an area under the curve of 0.76. Mean discomfort score was significantly lower using NCIT compared to RDT measurement (P < 0.001). There was poor agreement between body temperatures obtained by RDT and NCIT. The corneal NCIT measurement tends to underrecognize hypothermic and hyperthermic conditions. Although the use of the NCIT yields faster results and is significantly more comfortable for the dog than the RDT measurement, it cannot be recommended in dogs at this time. © Veterinary Emergency and Critical Care Society 2015.

A comparison of absolute calibrations of a radiation thermometer based on a monochromator and a tunable source

NASA Astrophysics Data System (ADS)

Keawprasert, T.; Anhalt, K.; Taubert, D. R.; Sperling, A.; Schuster, M.; Nevas, S.

2013-09-01

An LP3 radiation thermometer was absolutely calibrated at a newly developed monochromator-based set-up and the TUneable Lasers in Photometry (TULIP) facility of PTB in the wavelength range from 400 nm to 1100 nm. At both facilities, the spectral radiation of the respective sources irradiates an integrating sphere, thus generating uniform radiance across its precision aperture. The spectral irradiance of the integrating sphere is determined via an effective area of a precision aperture and a Si trap detector, traceable to the primary cryogenic radiometer of PTB. Due to the limited output power from the monochromator, the absolute calibration was performed with the measurement uncertainty of 0.17 % (k = 1), while the respective uncertainty at the TULIP facility is 0.14 %. Calibration results obtained by the two facilities were compared in terms of spectral radiance responsivity, effective wavelength and integral responsivity. It was found that the measurement results in integral responsivity at the both facilities are in agreement within the expanded uncertainty (k = 2). To verify the calibration accuracy, the absolutely calibrated radiation thermometer was used to measure the thermodynamic freezing temperatures of the PTB gold fixed-point blackbody.

Deaths from international terrorism compared with road crash deaths in OECD countries.

PubMed

Wilson, N; Thomson, G

2005-12-01

To estimate the relative number of deaths in member countries of the Organisation for Economic Co-operation and Development (OECD) from international terrorism and road crashes. Data on deaths from international terrorism (US State Department database) were collated (1994-2003) and compared to the road injury deaths (year 2000 and 2001 data) from the OECD International Road Transport Accident Database. In the 29 OECD countries for which comparable data were available, the annual average death rate from road injury was approximately 390 times that from international terrorism. The ratio of annual road to international terrorism deaths (averaged over 10 years) was lowest for the United States at 142 times. In 2001, road crash deaths in the US were equal to those from a September 11 attack every 26 days. There is a large difference in the magnitude of these two causes of deaths from injury. Policy makers need to be aware of this when allocating resources to preventing these two avoidable causes of mortality.

Forecasting Crude Oil Spot Price Using OECD Petroleum Inventory Levels

EIA Publications

2003-01-01

This paper presents a short-term monthly forecasting model of West Texas Intermediate crude oil spot price using Organization for Economic Cooperation and Development (OECD) petroleum inventory levels.

The Wage Premium on Tertiary Education: New Estimates for 21 OECD Countries Countries. OECD Economics Department Working Papers, No. 589

ERIC Educational Resources Information Center

Strauss, Hubert; de la Maisonneuve, Christine

2007-01-01

This paper presents cross-section estimates of gross hourly wage premia on tertiary education. They are based on a unified framework for 21 OECD countries from the 1990s to the early 2000s and use international household surveys to maximise international comparability. The results of the "augmented" Mincerian wage equations point to an…

Summary of BISON Development and Validation Activities - NEAMS FY16 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williamson, R. L.; Pastore, G.; Gamble, K. A.

This summary report contains an overview of work performed under the work package en- titled “FY2016 NEAMS INL-Engineering Scale Fuel Performance (BISON)” A first chapter identifies the specific FY-16 milestones, providing a basic description of the associated work and references to related detailed documentation. Where applicable, a representative technical result is provided. A second chapter summarizes major additional accomplishments, which in- clude: 1) publication of a journal article on solution verification and validation of BISON for LWR fuel, 2) publication of a journal article on 3D Missing Pellet Surface (MPS) analysis of BWR fuel, 3) use of BISON to designmore » a unique 3D MPS validation experiment for future in- stallation in the Halden research reactor, 4) participation in an OECD benchmark on Pellet Clad Mechanical Interaction (PCMI), 5) participation in an OECD benchmark on Reactivity Insertion Accident (RIA) analysis, 6) participation in an OECD activity on uncertainity quantification and sensitivity analysis in nuclear fuel modeling and 7) major improvements to BISON’s fission gas behavior models. A final chapter outlines FY-17 future work.« less

Non-University Sectors and the Provision of Higher Education in OECD Countries: Problematics of Articulation.

ERIC Educational Resources Information Center

Campbell, Malcolm B.

This paper identifies issues currently arising in efforts to coordinate public policy concerning competing sectors of postsecondary education in the Organisation for Economic Cooperation and Development Countries (OECD). It is presented as a result of the OECD's advisement that these industrialized countries need to further strengthen education…

OECD Reviews of Integrity in Education: Ukraine 2017

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

Education in Ukraine is marked by integrity violations from early childhood education and care through postgraduate study. In the past decade policy makers and civic organisations have made progress in addressing these challenges. However, much remains to be done. "OECD Reviews of Integrity in Education: Ukraine 2017" aims to support…

Comparison between auricular and standard rectal thermometers for the measurement of body temperature in dogs

PubMed Central

Sousa, Marlos G.; Carareto, Roberta; Pereira-Junior, Valdo A.; Aquino, Monally C.C.

2011-01-01

Although the rectal mucosa remains the traditional site for measuring body temperature in dogs, an increasing number of clinicians have been using auricular temperature to estimate core body temperature. In this study, 88 mature healthy dogs had body temperatures measured with auricular and rectal thermometers. The mean temperature and confidence intervals were similar for each method, but Bland-Altman plots showed high biases and limits of agreement unacceptable for clinical purposes. The results indicate that auricular and rectal temperatures should not be interpreted interchangeably. PMID:21731094

Comparison between auricular and standard rectal thermometers for the measurement of body temperature in dogs.

PubMed

Sousa, Marlos G; Carareto, Roberta; Pereira-Junior, Valdo A; Aquino, Monally C C

2011-04-01

Although the rectal mucosa remains the traditional site for measuring body temperature in dogs, an increasing number of clinicians have been using auricular temperature to estimate core body temperature. In this study, 88 mature healthy dogs had body temperatures measured with auricular and rectal thermometers. The mean temperature and confidence intervals were similar for each method, but Bland-Altman plots showed high biases and limits of agreement unacceptable for clinical purposes. The results indicate that auricular and rectal temperatures should not be interpreted interchangeably.

Tobacco control and the dental profession. A survey of the Organisation for Economic Co-operation and Development (OECD) national dental associations.

PubMed

Beaglehole, Rob H; Tsakos, Georgios; Watt, Richard G

2005-10-01

To explore the current role played by national dental associations (NDAs) in tobacco control and to assess relevant policy initiatives across OECD countries. A self-complete questionnaire survey. Chief Executive Officers of NDAs of OECD countries. A response rate of 74% was achieved. An overview of tobacco control policies from OECD member states was obtained. Half of the NDAs reported that they had a policy on tobacco control. Furthermore, a minority of OECD countries appear to have tobacco control guidelines that specifically include reference to the role of dental professionals. Dentists are able to prescribe nicotine replacement therapy (NRT) in less than a third of OECD member states. In a small number of OECD countries there was funding available to encourage dentists to become more actively involved in tobacco control activities. Undergraduate training focusing on tobacco control is not universally provided across all OECD countries. There is an urgent need to put tobacco control initiatives on the oral health policy agenda of NDAs across the OECD. A range of policy opportunities exist to facilitate greater involvement of the dental profession in tobacco control activities.

Electronic clinical predictive thermometer using logarithm for temperature prediction

NASA Technical Reports Server (NTRS)

Cambridge, Vivien J. (Inventor); Koger, Thomas L. (Inventor); Nail, William L. (Inventor); Diaz, Patrick (Inventor)

1998-01-01

A thermometer that rapidly predicts body temperature based on the temperature signals received from a temperature sensing probe when it comes into contact with the body. The logarithms of the differences between the temperature signals in a selected time frame are determined. A line is fit through the logarithms and the slope of the line is used as a system time constant in predicting the final temperature of the body. The time constant in conjunction with predetermined additional constants are used to compute the predicted temperature. Data quality in the time frame is monitored and if unacceptable, a different time frame of temperature signals is selected for use in prediction. The processor switches to a monitor mode if data quality over a limited number of time frames is unacceptable. Determining the start time on which the measurement time frame for prediction is based is performed by summing the second derivatives of temperature signals over time frames. When the sum of second derivatives in a particular time frame exceeds a threshold, the start time is established.

The OECD Member Countries--1984 Edition--20th Year.

ERIC Educational Resources Information Center

OECD Observer, 1984

1984-01-01

Lists Organization for Economic Co-operation and Development (OECD) member countries with corresponding data on: area; agricultural area; population; labor force; unemployment rate; civilian employment; gross domestic produce; currency; imports; exports; consumer prices; industrial production change for 1983; infant mortality; public expenditure…

Fabrication of a mini multi-fixed-point cell for the calibration of industrial platinum resistance thermometers

NASA Astrophysics Data System (ADS)

Ragay-Enot, Monalisa; Lee, Young Hee; Kim, Yong-Gyoo

2017-07-01

A mini multi-fixed-point cell (length 118 mm, diameter 33 mm) containing three materials (In-Zn eutectic (mass fraction 3.8% Zn), Sn and Pb) in a single crucible was designed and fabricated for the easy and economical fixed-point calibration of industrial platinum resistance thermometers (IPRTs) for use in industrial temperature measurements. The melting and freezing behaviors of the metals were investigated and the phase transition temperatures were determined using a commercial dry-block calibrator. Results showed that the melting plateaus are generally easy to realize and are reproducible, flatter and of longer duration. On the other hand, the freezing process is generally difficult, especially for Sn, due to the high supercooling required to initiate freezing. The observed melting temperatures at optimum set conditions were 143.11 °C (In-Zn), 231.70 °C (Sn) and 327.15 °C (Pb) with expanded uncertainties (k  = 2) of 0.12 °C, 0.10 °C and 0.13 °C, respectively. This multi-fixed-point cell can be treated as a sole reference temperature-generating system. Based on the results, the realization of melting points of the mini multi-fixed-point cell can be recommended for the direct calibration of IPRTs in industrial applications without the need for a reference thermometer.

Unemployment and prostate cancer mortality in the OECD, 1990-2009.

PubMed

Maruthappu, Mahiben; Watkins, Johnathan; Taylor, Abigail; Williams, Callum; Ali, Raghib; Zeltner, Thomas; Atun, Rifat

2015-01-01

The global economic downturn has been associated with increased unemployment in many countries. Insights into the impact of unemployment on specific health conditions remain limited. We determined the association between unemployment and prostate cancer mortality in members of the Organisation for Economic Co-operation and Development (OECD). We used multivariate regression analysis to assess the association between changes in unemployment and prostate cancer mortality in OECD member states between 1990 and 2009. Country-specific differences in healthcare infrastructure, population structure, and population size were controlled for and lag analyses conducted. Several robustness checks were also performed. Time trend analyses were used to predict the number of excess deaths from prostate cancer following the 2008 global recession. Between 1990 and 2009, a 1% rise in unemployment was associated with an increase in prostate cancer mortality. Lag analysis showed a continued increase in mortality years after unemployment rises. The association between unemployment and prostate cancer mortality remained significant in robustness checks with 46 controls. Eight of the 21 OECD countries for which a time trend analysis was conducted, exhibited an estimated excess of prostate cancer deaths in at least one of 2008, 2009, or 2010, based on 2000-2007 trends. Rises in unemployment are associated with significant increases in prostate cancer mortality. Initiatives that bolster employment may help to minimise prostate cancer mortality during times of economic hardship.

An Emerging Knowledge-Based Economy in China? Indicators from OECD Databases. OECD Science, Technology and Industry Working Papers, 2004/4

ERIC Educational Resources Information Center

Criscuolo, Chiara; Martin, Ralf

2004-01-01

The main objective of this Working Paper is to show a set of indicators on the knowledge-based economy for China, mainly compiled from databases within EAS, although data from databases maintained by other parts of the OECD are included as well. These indicators are put in context by comparison with data for the United States, Japan and the EU (or…

Tympanic, Infrared Skin, and Temporal Artery Scan Thermometers Compared with Rectal Measurement in Children: A Real-Life Assessment

PubMed Central

Allegaert, Karel; Casteels, Kristina; van Gorp, Ilse; Bogaert, Guy

2014-01-01

Introduction Body temperature measurement in children is of clinical relevance. Although rectal measurement is the gold standard, less invasive tools have become available. We aimed to describe the accuracy of tympanic, infrared skin, or temporal artery scan thermometers compared with rectal measurement to reflect core temperature. Methods Rectal (Filac 3000; Covidien, Mechelen, Belgium), tympanic (AccuSystem Genius2 Typmanic Infrared Ear Thermometer, Covidien, Mechelen, Belgium), temporal artery scan (Exergen, Exergen Corp, Watertown, Massachusetts), and infrared (ThermoFlash Contactless Medical Electronic Thermometer, Visiomedlab, Paris, France) body temperature measurements were randomly performed and readings were collected once. Temperature readings were described as median and range, and observations were compared with rectal temperature readings (using Wilcoxon, Bland-Altman, sensitivity, and specificity tests). The child’s comfort was assessed by the child, parent, and nurse (using Likert scales) and ease of use was assessed by nurses (using visual analog scale). Results Based on observations in 294 (median age = 3.2 years, range = 0.02–17 years) children, the mean difference was 0.49°C (tympanic scan; P < 0.0001), 0.34°C (infrared skin scan; P < 0.0001), and 0°C (temporal artery scan; P = 0.9288), respectively, when compared with rectal temperature readings. Based on visual inspection of Bland-Altman plots, all tools overestimated the temperature at lower body temperature and underestimated the temperature at higher body temperature, resulting in a sensitivity of 22% to 41% and a specificity of 98% to 100% for rectal temperatures above 38°C. The Likert scale scores and the visual analog scale scores for rectal measurement were only slightly higher when compared with the other methods. Conclusions All noninvasive techniques underperformed compared with rectal measurement. The temporal artery scan deviations were smallest, but all noninvasive

A Comparative Study of Suicide Rates among 10–19-Year-Olds in 29 OECD Countries

PubMed Central

Roh, Beop-Rae; Jung, Eun Hee; Hong, Hyun Ju

2018-01-01

Objective This study had two main objectives: to compare current suicide rates in OECD countries among 10–19-year-olds and to identify patterns of suicide rates based on age, gender and time. Furthermore we investigated the main dimensions that contributed to the variation in child and adolescent suicide rates across countries. Methods We combined the WHO mortality data and the population data released by OECD to calculate the suicide rates in 29 OECD countries. A self-organizing map (SOM), k-means clustering analysis, and multi-dimensional scaling were used to classify countries based on similarities in suicide rate structure and to identify the important dimensions accounting for differences among groups. Results We identified significant differences in suicide rates depending on age, sex, country, and time period. Late adolescence and male gender were universal risk factors for suicide, and we observed a general trend of declining suicide rates in OECD countries. The SOM analysis yielded eight types of countries. Most countries showed gender gaps in suicide rates of similar magnitudes; however, there were outliers in which the gender gap was particularly large or small. Conclusion Significant variation exists with respect to suicide rates and their associated gender gaps in OECD countries. PMID:29486551

Early Childhood Education and Care Policy in the United States of America. OECD Country Note.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

This paper is the result of an intensive case study by an Organisation for Economic Cooperation and Development (OECD) review team, whose purpose was to investigate early childhood education and care (ECEC) in the United States, 1 of 12 countries participating in the OECD review between 1998 and 2000. The paper draws on information provided by a…

Health Workforce and International Migration: Can New Zealand Compete? OECD Health Working Papers No. 33

ERIC Educational Resources Information Center

Zurn, Pascal; Dumont, Jean-Christophe

2008-01-01

This paper examines health workforce and migration policies in New Zealand, with a special focus on the international recruitment of doctors and nurses. The health workforce in New Zealand, as in all OECD countries, plays a central role in the health system. Nonetheless, maybe more than for any other OECD country, the health workforce in New…

A microfluidic thermometer: Precise temperature measurements in microliter- and nanoliter-scale volumes

PubMed Central

McKenzie, Brittney A.

2017-01-01

Measuring the temperature of a sample is a fundamental need in many biological and chemical processes. When the volume of the sample is on the microliter or nanoliter scale (e.g., cells, microorganisms, precious samples, or samples in microfluidic devices), accurate measurement of the sample temperature becomes challenging. In this work, we demonstrate a technique for accurately determining the temperature of microliter volumes using a simple 3D-printed microfluidic chip. We accomplish this by first filling “microfluidic thermometer” channels on the chip with substances with precisely known freezing/melting points. We then use a thermoelectric cooler to create a stable and linear temperature gradient along these channels within a measurement region on the chip. A custom software tool (available as online Supporting Information) is then used to find the locations of solid-liquid interfaces in the thermometer channels; these locations have known temperatures equal to the freezing/melting points of the substances in the channels. The software then uses the locations of these interfaces to calculate the temperature at any desired point within the measurement region. Using this approach, the temperature of any microliter-scale on-chip sample can be measured with an uncertainty of about a quarter of a degree Celsius. As a proof-of-concept, we use this technique to measure the unknown freezing point of a 50 microliter volume of solution and demonstrate its feasibility on a 400 nanoliter sample. Additionally, this technique can be used to measure the temperature of any on-chip sample, not just near-zero-Celsius freezing points. We demonstrate this by using an oil that solidifies near room temperature (coconut oil) in a microfluidic thermometer to measure on-chip temperatures well above zero Celsius. By providing a low-cost and simple way to accurately measure temperatures in small volumes, this technique should find applications in both research and educational

Golden Relics & Historical Standards: How the OECD is Expanding Global Education Governance through PISA for Development

ERIC Educational Resources Information Center

Addey, Camilla

2017-01-01

Setting this paper against the backdrop of scholarly research on recent changes in the OECD's approach and workings in education, I analyse how the OECD has reinforced its infrastructural and epistemological global governance through the Programme for International Student Assessment (PISA) for Development (PISA-D). Drawing on qualitative data,…

Validation in Support of Internationally Harmonised OECD Test Guidelines for Assessing the Safety of Chemicals.

PubMed

Gourmelon, Anne; Delrue, Nathalie

Ten years elapsed since the OECD published the Guidance document on the validation and international regulatory acceptance of test methods for hazard assessment. Much experience has been gained since then in validation centres, in countries and at the OECD on a variety of test methods that were subjected to validation studies. This chapter reviews validation principles and highlights common features that appear to be important for further regulatory acceptance across studies. Existing OECD-agreed validation principles will most likely generally remain relevant and applicable to address challenges associated with the validation of future test methods. Some adaptations may be needed to take into account the level of technique introduced in test systems, but demonstration of relevance and reliability will continue to play a central role as pre-requisite for the regulatory acceptance. Demonstration of relevance will become more challenging for test methods that form part of a set of predictive tools and methods, and that do not stand alone. OECD is keen on ensuring that while these concepts evolve, countries can continue to rely on valid methods and harmonised approaches for an efficient testing and assessment of chemicals.

ICTs and Gender. OECD Digital Economy Papers, No. 129

ERIC Educational Resources Information Center

van Welsum, Desiree; Montagnier, Pierre

2007-01-01

This document provides an overview of the gender distribution of ICT and ICT-related employment in OECD countries, and ICT employment patterns are contrasted with overall employment to highlight differences. The authors discuss participation in ICT-related education and training, and differences in ICT access and use by gender. Overall,…

EPA's Role with the Organization for Economic Cooperation and Development (OECD)

EPA Pesticide Factsheets

The Organization for Economic Cooperation and Development (OECD) brings together the governments of countries committed to democracy and the market economy from around the world to support sustainable economic growth.

Family policies in OECD countries: a comparative analysis.

PubMed

Thévenon, Olivier

2011-01-01

This article discusses the diversity of family policy models in 28 OECD countries in terms of the balance between their different objectives and the mix of instruments adopted to implement the policies. Cross-country policy differences are investigated by applying a principal component analysis to comprehensive country-level data from the OECD Family database covering variables such as parental leave conditions, childcare service provision, and financial support to families. The results find persistent differences in the family policy patterns embedded in different contexts of work-family "outcomes." Country classifications of family policy packages only partially corroborate categorizations in earlier studies, owing to considerable within-group heterogeneity and the presence of group outliers. The Nordic countries outdistance the others with comprehensive support to working parents with very young children. Anglo-Saxon countries provide much less support for working parents with very young children, and financial support is targeted on low-income and large families and focuses on preschool and early elementary education. Continental and Eastern European countries form a more heterogeneous group, while the support received by families in Southern Europe and in Asian countries is much lower in all its dimensions.

Five types of OECD healthcare systems: empirical results of a deductive classification.

PubMed

Böhm, Katharina; Schmid, Achim; Götze, Ralf; Landwehr, Claudia; Rothgang, Heinz

2013-12-01

This article classifies 30 OECD healthcare systems according to a deductively generated typology by Rothgang and Wendt [1]. This typology distinguishes three core dimensions of the healthcare system: regulation, financing, and service provision, and three types of actors: state, societal, and private actors. We argue that there is a hierarchical relationship between the three dimensions, led by regulation, followed by financing and finally service provision, where the superior dimension restricts the nature of the subordinate dimensions. This hierarchy rule limits the number of theoretically plausible types to ten. To test our argument, we classify 30 OECD healthcare systems, mainly using OECD Health Data and WHO country reports. The classification results in five system types: the National Health Service, the National Health Insurance, the Social Health Insurance, the Etatist Social Health Insurance, and the Private Health System. All five types belong to the group of healthcare system types considered theoretically plausible. Merely Slovenia does not comply with our assumption of a hierarchy among dimensions and typical actors due to its singular transformation history. Crown Copyright © 2013. Published by Elsevier Ireland Ltd. All rights reserved.

A Field Assessment of a Prototype Meter for Measuring the Wet-Bulb Globe-Thermometer Index

PubMed Central

Walters, J. D.

1968-01-01

A prototype electronic instrument for the direct measurement of the wet-bulb globe-thermometer index is described. An assessment is made of its accuracy, as compared with W.B.G.T. indices calculated from conventional thermometric data, and a comparison is made between W.B.G.T. values read from the meter and effective or corrected effective temperatures derived from separate thermometric and air velocity recording instruments in the same climates. The instrument proved to be reliable and accurate over a wide range of climates and is a useful self-contained device for use in habitability surveys and similar investigations. Images PMID:5663429

Z{gamma}{gamma}{gamma} {yields} 0 Processes in SANC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bardin, D. Yu., E-mail: bardin@nu.jinr.ru; Kalinovskaya, L. V., E-mail: kalinov@nu.jinr.ru; Uglov, E. D., E-mail: corner@nu.jinr.ru

2013-11-15

We describe the analytic and numerical evaluation of the {gamma}{gamma} {yields} {gamma}Z process cross section and the Z {yields} {gamma}{gamma}{gamma} decay rate within the SANC system multi-channel approach at the one-loop accuracy level with all masses taken into account. The corresponding package for numeric calculations is presented. For checking of the results' correctness we make a comparison with the other independent calculations.

OECD Reviews of School Resources: Flemish Community of Belgium

ERIC Educational Resources Information Center

Nusche, Deborah; Miron, Gary; Santiago, Paulo; Teese, Richard

2015-01-01

This report for the Flemish Community of Belgium forms part of the Organisation for Economic Cooperation and Development (OECD) Review of Policies to Improve the Effectiveness of Resource Use in Schools and explores how resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education.…

Taxation and Skills. OECD Tax Policy Studies. No. 24

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

This Tax Policy Study on Taxation and Skills examines how tax policy can encourage skills development in OECD countries. This study also assesses the returns to tertiary and adult education and examines how these returns are shared between governments and students. The study builds indicators that examine incentives for individuals and governments…

Financial Inequity in Basic Education in Selected OECD Countries

ERIC Educational Resources Information Center

Zhang, Yu; Mizunoya, Suguru; You, You; Tsang, Mun

2011-01-01

This is a study of financial disparities in primary and secondary education in OECD countries that have a relatively large population and a school finance system with decentralized features. These countries include the United States, Britain, Australia, Spain, Canada, and Japan. There are two major research questions: What are the trends in…

OECD Reviews of Evaluation and Assessment in Education: Australia

ERIC Educational Resources Information Center

Santiago, Paulo; Donaldson, Graham; Herman, Joan; Shewbridge, Claire

2011-01-01

This report for Australia forms part of the Organisation for Economic Cooperation and Development (OECD) Review on Evaluation and Assessment Frameworks for Improving School Outcomes. The purpose of the Review is to explore how systems of evaluation and assessment can be used to improve the quality, equity and efficiency of school education. The…

Child and Family: Demographic Developments in the OECD Countries.

ERIC Educational Resources Information Center

Le Bras, Herve

This study of early childhood and the family in member countries of the Organisation for Economic Co-Operation and Development (OECD) employs two statistical approaches to the problem of providing an accurate picture of modern conditions of family life. A classical demographic approach to population studies is initially used, then is critiqued,…

Sneaky Gamma-Rays: Using Gravitational Lensing to Avoid Gamma-Gamma-Absorption

NASA Astrophysics Data System (ADS)

Boettcher, Markus; Barnacka, Anna

2014-08-01

It has recently been suggested that gravitational lensing studies of gamma-ray blazars might be a promising avenue to probe the location of the gamma-ray emitting region in blazars. Motivated by these prospects, we have investigated potential gamma-gamma absorption signatures of intervening lenses in the very-high-energy gamma-ray emission from lensedblazars. We considered intervening galaxies and individual stars within these galaxies. We find that the collective radiation field of galaxies acting as sources of macrolensing are not expected to lead to significant gamma-gamma absorption. Individual stars within intervening galaxies could, in principle, cause a significant opacity to gamma-gamma absorption for VHE gamma-rays if the impact parameter (the distance of closest approach of the gamma-ray to the center of the star) is small enough. However, we find that the curvature of the photon path due to gravitational lensing will cause gamma-ray photons to maintain a sufficiently large distance from such stars to avoid significant gamma-gamma absorption. This re-inforces the prospect of gravitational-lensing studies of gamma-ray blazars without interference due to gamma-gamma absorption due to the lensing objects.

Bilateral Comparison of Blackbodies for Clinical Infrared Ear Thermometers between NIMT and NMIJ

NASA Astrophysics Data System (ADS)

Manoi, A.; Norranim, U.; Kaneko, Y.; Ishii, J.

2014-04-01

This article describes the results of the bilateral comparison of blackbodies for infrared ear thermometers (IRETs) between the National Institute of Metrology (Thailand), NIMT, and the National Metrology Institute of Japan (NMIJ). The purpose of this comparison was to ensure consistency of the national radiance temperature scales for IRETs maintained by NIMT and NMIJ. Results of the measurements indicate differences in radiance temperature within 10 mK with a maximum measurement uncertainty of 64 mK. The equivalence of the radiance temperature scales realized by both NIMT and NMIJ in the range of 35 C to 42 C for IRET calibration is indicated. The results of this bilateral comparison can be used in terms of quality assurance and validation of calibration.

Unemployment and prostate cancer mortality in the OECD, 1990–2009

PubMed Central

Maruthappu, Mahiben; Watkins, Johnathan; Taylor, Abigail; Williams, Callum; Ali, Raghib; Zeltner, Thomas; Atun, Rifat

2015-01-01

The global economic downturn has been associated with increased unemployment in many countries. Insights into the impact of unemployment on specific health conditions remain limited. We determined the association between unemployment and prostate cancer mortality in members of the Organisation for Economic Co-operation and Development (OECD). We used multivariate regression analysis to assess the association between changes in unemployment and prostate cancer mortality in OECD member states between 1990 and 2009. Country-specific differences in healthcare infrastructure, population structure, and population size were controlled for and lag analyses conducted. Several robustness checks were also performed. Time trend analyses were used to predict the number of excess deaths from prostate cancer following the 2008 global recession. Between 1990 and 2009, a 1% rise in unemployment was associated with an increase in prostate cancer mortality. Lag analysis showed a continued increase in mortality years after unemployment rises. The association between unemployment and prostate cancer mortality remained significant in robustness checks with 46 controls. Eight of the 21 OECD countries for which a time trend analysis was conducted, exhibited an estimated excess of prostate cancer deaths in at least one of 2008, 2009, or 2010, based on 2000–2007 trends. Rises in unemployment are associated with significant increases in prostate cancer mortality. Initiatives that bolster employment may help to minimise prostate cancer mortality during times of economic hardship. PMID:26045715

Income-related inequalities and inequities in health care services utilisation in 18 selected OECD countries.

PubMed

Devaux, Marion

2015-01-01

A key policy objective in OECD countries is to achieve adequate access to health care for all people on the basis of need. Previous studies have shown that there are inequities in health care services utilisation (HCSU) in the OECD area. In recent years, measures have been taken to enhance health care access. This paper re-examines income-related inequities in doctor visits among 18 selected OECD countries, updating previous results for 12 countries with 2006-2009 data, and including six new countries. Inequalities in preventive care services are also considered for the first time. The indirect standardisation procedure is used to estimate the need-adjusted HCSU and concentration indexes are derived to gauge inequalities and inequities. Overall, inequities in HCSU remain present in OECD countries. In most countries, for the same health care needs, people with higher incomes are more likely to consult a doctor than those with lower incomes. Pro-rich inequalities in dental visits and cancer screening uptake are also found in nearly all countries, although the magnitude of these varies among countries. These findings suggest that further monitoring of inequalities is essential in order to assess whether country policy objectives are achieved on a regular basis.

A 6-bit 4 GS/s pseudo-thermometer segmented CMOS DAC

NASA Astrophysics Data System (ADS)

Yijun, Song; Wenyuan, Li

2014-06-01

A 6-bit 4 GS/s, high-speed and power-efficient DAC for ultra-high-speed transceivers in 60 GHz band millimeter wave technology is presented. A novel pseudo-thermometer architecture is proposed to realize a good compromise between the fast conversion speed and the chip area. Symmetrical and compact floor planning and layout techniques including tree-like routing, cross-quading and common-centroid method are adopted to guarantee the chip is fully functional up to near-Nyquist frequency in a standard 0.18 μm CMOS process. Post simulation results corroborate the feasibility of the designed DAC, which canperform good static and dynamic linearity without calibration. DNL errors and INL errors can be controlled within ±0.28 LSB and ±0.26 LSB, respectively. SFDR at 4 GHz clock frequency for a 1.9 GHz near-Nyquist sinusoidal output signal is 40.83 dB and the power dissipation is less than 37 mW.

Governing Schooling through "What Works": The OECD's PISA for Schools

ERIC Educational Resources Information Center

Lewis, Steven

2017-01-01

This paper explores Programme for International Student Assessment (PISA) for Schools, a local variant of the Organisation for Economic Cooperation and Development (OECD's) influential PISA that not only assesses an individual school's performance in reading, mathematics and science against international schooling systems, but also promotes 17…

Comparing the OECD's and Norway's Orientation to Equity in Their Teacher Education Policies--Teacher Autonomy under Attack?

ERIC Educational Resources Information Center

Haugen, Cecilie Ronning

2013-01-01

More and more nations are losing the ability to control their education systems. OECD is an important premise provider for educational policymaking championing a neoliberal agenda. With the aim to investigate the impact the OECD may have on national policymaking, this paper compares their recent teacher education policies with those of Norway. The…

A comparative study on accuracy of liquid crystal forehead, digital electronic axillary, infrared tympanic with glass-mercury rectal thermometer in infants and young children.

PubMed

Kongpanichkul, A; Bunjongpak, S

2000-09-01

This study was carried out to assess the accuracy of three devices namely, liquid crystal forehead, digital electronic axillary and infrared tympanic thermometer, using a glass-mercury rectal thermometer as the control. The subjects were two hundred children aged 0-48 months. The mean rectal temperature was 38.0 +/- 0.91 degrees C; forehead, 37.83 +/- 0.94 degrees C; tympanic, 37.77 +/- 0.95 degrees C, and axillary, 37.71 +/- 0.86 degrees C. Compared to the rectal temperature, all values were significantly lower (p < 0.05). Forehead, tympanic and axillary temperature differed from rectal temperature by at least 0.5 degrees C in 33.33 per cent, 23.5 per cent and 31.5 per cent of subjects, and at least 1 degrees C in 22 per cent, 1 per cent and 6 per cent of subjects respectively. Accuracy in detection of fever was 79 per cent for forehead, 85.5 per cent for tympanic and 84 per cent for axillary thermometry. Sensitivity of the three devices was 67-83 per cent in detection of fever and 64-77 per cent in detection of high fever. Tympanic thermometry had the best performance while forehead thermometry had the poorest. After using revised diagnostic threshold temperature by ROC curves, sensitivity of each device improved but accuracy was nearly the same. It is concluded that the three devices are not suitable as a substitute for a glass-mercury rectal thermometer in assessment of fever in infants and young children.

Extension of the TRANSURANUS burnup model to heavy water reactor conditions

NASA Astrophysics Data System (ADS)

Lassmann, K.; Walker, C. T.; van de Laar, J.

1998-06-01

The extension of the light water reactor burnup equations of the TRANSURANUS code to heavy water reactor conditions is described. Existing models for the fission of 235U and the buildup of plutonium in a heavy water reactor are evaluated. In order to overcome the limitations of the frequently used RADAR model at high burnup, a new model is presented. After verification against data for the radial distributions of Xe, Cs, Nd and Pu from electron probe microanalysis, the model is used to analyse the formation of the high burnup structure in a heavy water reactor. The new model allows the analysis of light water reactor fuel rod designs at high burnup in the OECD Halden Heavy Water Reactor.

The influence of the spectral emissivity of flat-plate calibrators on the calibration of IR thermometers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cárdenas-García, D.; Méndez-Lango, E.

Flat Calibrators (FC) are an option for calibration of infrared thermometers (IT) with a fixed large target. FCs are neither blackbodies, nor gray-bodies; their spectral emissivity is lower than one and depends on wavelength. Nevertheless they are used as gray-bodies with a nominal emissivity value. FCs can be calibrated radiometrically using as reference a calibrated IR thermometer (RT). If an FC will be used to calibrate ITs that work in the same spectral range as the RT then its calibration is straightforward: the actual FC spectral emissivity is not required. This result is valid for any given fixed emissivity assessedmore » to the FC. On the other hand, when the RT working spectral range does not match with that of the ITs to be calibrated with the FC then it is required to know the FC spectral emissivity as part of the calibration process. For this purpose, at CENAM, we developed an experimental setup to measure spectral emissivity in the infrared spectral range, based on a Fourier transform infrared spectrometer. Not all laboratories have emissivity measurement capability in the appropriate wavelength and temperature ranges to obtain the spectral emissivity. Thus, we present an estimation of the error introduced when the spectral range of the RT used to calibrate an FC and the spectral ranges of the ITs to be calibrated with the FC do not match. Some examples are developed for the cases when RT and IT spectral ranges are [8,13] μm and [8,14] μm respectively.« less

The Z {yields} cc-bar {yields} {gamma}{gamma}*, Z {yields} bb-bar {yields} {gamma}{gamma}* triangle diagrams and the Z {yields} {gamma}{psi}, Z {yields} {gamma}Y decays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Achasov, N. N., E-mail: achasov@math.nsc.ru

2011-03-15

The approach to the Z {yields} {gamma}{psi} and Z {yields} {gamma}Y decay study is presented in detail, based on the sum rules for the Z {yields} cc-bar {yields} {gamma}{gamma}* and Z {yields} bb-bar {yields} {gamma}{gamma}* amplitudes and their derivatives. The branching ratios of the Z {yields} {gamma}{psi} and Z {yields} {gamma}Y decays are calculated for different hypotheses on saturation of the sum rules. The lower bounds of {Sigma}{sub {psi}} BR(Z {yields} {gamma}{psi}) = 1.95 Multiplication-Sign 10{sup -7} and {Sigma}{sub {upsilon}} BR(Z {yields} {gamma}Y) = 7.23 Multiplication-Sign 10{sup -7} are found. Deviations from the lower bounds are discussed, including the possibilitymore » of BR(Z {yields} {gamma}J/{psi}(1S)) {approx} BR(Z {yields} {gamma}Y(1S)) {approx} 10{sup -6}, that could be probably measured in LHC. The angular distributions in the Z {yields} {gamma}{psi} and Z {yields} {gamma}Y decays are also calculated.« less

More for less: Analysis of the performance of avian acute oral guideline OECD 223 from empirical data.

PubMed

Edwards, Peter J; Leopold, Annegaaike; Beavers, Joann B; Springer, Timothy A; Chapman, Peter; Maynard, Samuel K; Hubbard, Patrick

2017-09-01

Since the publication of the Organisation for Economic Co-operation and Development (OECD) avian acute oral guideline, OECD 223, empirical data have become available to compare the performance of OECD 223 with statistical simulations used to validate this guideline and with empirical data for US Environmental Protection Agency Office of Chemical Safety and Pollution Prevention (USEPA OCSPP) guideline OCSPP 850.2100. Empirical studies comprised 244 for Northern bobwhite, of which 73 were dose-response tests and 171 were limit tests. Of the dose-response tests, 26 were conducted to OECD 223 (using 3-4 stages) and 33 to OCSPP 850.2100 (using the single 50-bird design). Data were collected from 5 avian testing laboratories from studies performed between 2006 and 2013. The success with which the LD50 and slope could be determined was 100% and 96% for OECD 223 (mean 26 birds per test) and 100% and 51% for OCSPP 850.2100 (mean 50 birds per test). This was consistent with the statistical simulations. Control mortality across all species and designs amounted to 0.26% (n = 2655) with only single mortalities occurring in any 1 study and <1% for any 1 species. The simulations used to validate the OECD 223 design showed that control mortality up to 1% will have no observable impact on the performance. The distribution of time to death for Northern bobwhite, zebra finch, and canary were obtained from 90, 29, and 17 studies, and mortalities appeared within 3 d for 71%, 95%, and 91% of birds tested, respectively. Integr Environ Assess Manag 2017;13:906-914. © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Productivity changes in OECD healthcare systems: bias-corrected Malmquist productivity approach.

PubMed

Kim, Younhee; Oh, Dong-Hyun; Kang, Minah

2016-10-01

This study evaluates productivity changes in the healthcare systems of 30 Organization for Economic Co-operation and Development (OECD) countries over the 2002-2012 periods. The bootstrapped Malmquist approach is used to estimate bias-corrected indices of healthcare performance in productivity, efficiency and technology by modifying the original distance functions. Two inputs (health expenditure and school life expectancy) and two outputs (life expectancy at birth and infant mortality rate) are used to calculate productivity growth. There are no perceptible trends in productivity changes over the 2002-2012 periods, but positive productivity improvement has been noticed for most OECD countries. The result also informs considerable variations in annual productivity scores across the countries. Average annual productivity growth is evenly yielded by efficiency and technical changes, but both changes run somewhat differently across the years. The results of this study assert that policy reforms in OECD countries have improved productivity growth in healthcare systems over the past decade. Countries that lag behind in productivity growth should benchmark peer countries' practices to increase performance by prioritizing an achievable trajectory based on socioeconomic conditions. For example, relatively inefficient countries in this study indicate higher income inequality, corresponding to inequality and health outcomes studies. Although income inequality and globalization are not direct measures to estimate healthcare productivity in this study, these issues could be latent factors to explain cross-country healthcare productivity for future research. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Adaptation of the fish juvenile growth test (OECD TG 215, 2000) to the marine species Dicentrarchus labrax.

PubMed

Tornambè, A; Manfra, L; Canepa, S; Oteri, F; Martuccio, G; Cicero, A M; Magaletti, E

2018-02-01

The OECD TG 215 method (2000) (C.14 method of EC Regulation 440/2008) was developed on the rainbow trout (Oncorynchus mykiss) to assess chronic toxicity (28d) of chemicals on fish juveniles. It contemplates to use other well documented species identifying suitable conditions to evaluate their growth. OECD proposes the European sea bass (Dicentrarchus labrax, L. 1758) as Mediterranean species among vertebrates recommended in the OECD guidelines for the toxicity testing of chemicals. In this context, our study is aimed to proposing the adaptation of the growth test (OECD TG 215, 2000) to D. labrax. For this purpose toxicity tests were performed with sodium dodecyl sulfate, a reference toxicant commonly used in fish toxicity assays. The main aspects of the testing procedure were reviewed: fish size (weight), environmental conditions, dilution water type, experimental design, loading rate and stocking density, feeding (food type and ration), test validity criteria. The experience gained from growth tests with the sea bass allows to promote its inclusion among the species to be used for the C.14 method. Copyright © 2016. Published by Elsevier Inc.

Returns to ICT Skills. OECD Education Working Papers, No. 134

ERIC Educational Resources Information Center

Falck, Oliver; Heimisch, Alexandra; Wiederhold, Simon

2016-01-01

How important is mastering information and communication technologies (ICT) in modern labour markets? We present the first evidence on this question, drawing on unique data that provide internationally comparable information on ICT skills in 19 countries from the OECD Programme for the International Assessment of Adult Competencies (PIAAC). Our…

Radioactivity Levels and Gamma-Ray Dose Rate in Soil Samples from Kohistan (Pakistan) Using Gamma-Ray Spectrometry

NASA Astrophysics Data System (ADS)

Hasan, M. Khan; Ismail, M.; K., Khan; Akhter, P.

2011-01-01

The analysis of naturally occurring radionuclides (226Ra, 232Th and 40K) and an anthropogenic radionuclide 137Cs is carried out in some soil samples collected from Kohistan district of N.W.F.P. (Pakistan), using gamma-ray spectrometry. The gamma spectrometry is operated using a high purity Germanium (HPGe) detector coupled with a computer based high resolution multi channel analyzer. The specific activity in soil ranges from 24.72 to 78.48Bq·kg-1 for 226Ra, 21.73 to 75.28Bq·kg-1 for 232Th, 7.06 to 14.9Bq·kg-1 for 137Cs and 298.46 to 570.77Bq·kg-1 for 40K with the mean values of 42.11, 43.27, 9.5 and 418.27Bq·kg-1, respectively. The radium equivalent activity in all the soil samples is lower than the safe limit set in the OECD report (370Bq·kg-1). Man-made radionuclide 137Cs is also present in detectable amount in all soil samples. Presence of 137Cs indicates that the samples in this remote area also receive some fallout from nuclear accident in Chernobyl power plant in 1986. The internal and external hazard indices have the mean values of 0.48 and 0.37 respectively. Absorbed dose rates and effective dose equivalents are also determined for the samples. The concentration of radionuclides found in the soil samples during the present study is nominal and does not pose any potential health hazard to the general public.

Skills for the 21st Century: Findings and Policy Lessons from the OECD Survey of Adult Skills. OECD Education Working Papers, No. 166

ERIC Educational Resources Information Center

Martin, John P.

2018-01-01

The OECD Survey of Adult Skills is the jewel in the crown of its Programme for the International Assessment of Adult Competencies (PIAAC). This paper argues that the findings and policy lessons from the project to date justify the high hopes which were placed in PIAAC when detailed planning for the project began in 2003. First, it presents a brief…

EURAMET key comparison no. EURAMET.T-K1: realisations of the ITS-90 from 2.6 K to 24.5561 K, using rhodium-iron resistance thermometers

NASA Astrophysics Data System (ADS)

Gaiser, Christof; Fellmuth, Bernd; Steur, Peter; Szmyrka-Grzebyk, Anna; Manuszkiewicz, Henryk; Lipinski, Leszek; Peruzzi, Andrea; Rusby, Richard; Head, David

2017-01-01

In the temperature range from 0.65 K to 24.5561 K, the ITS-90 is defined by specified vapour-pressure equations for 3He and 4He and interpolation equations for a constant-volume gas thermometer using 3He or 4He. The definitions are given in sections 3.1 and 3.2 of the ITS-90 text, and methods for realising the scale in this range are outlined in chapters 4 and 5 of the Guide to the Realization of the ITS-90 (formerly Supplementary Information for the ITS-90). Direct realisations of the ITS-90 by these methods require relatively sophisticated apparatus and time-consuming experiments, and consequently they are rarely carried out. The situation is acceptable in practice only because rhodium-iron resistance thermometers (RIRTs) are available that, once calibrated, are able to maintain their calibrations reliably for long periods of time. They are the practical thermometers on which realisations of the ITS-90 are most accurately maintained, disseminated and compared. The key comparison EURAMET.T-K1 is therefore a comparison of calibrated RIRTs. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCT, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

OECD/NEA study on the economics of the long-term operation of nuclear power plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lokhov, A.; Cameron, R.

2012-07-01

The OECD Nuclear Energy Agency (NEA) established the Ad hoc expert group on the Economics of Long-term Operation (LTO) of Nuclear Power Plants. The primary aim of this group is to collect and analyse technical and economic data on the upgrade and lifetime extension experience in OECD countries, and to assess the likely applications for future extensions. This paper describes the key elements of the methodology of economic assessment of LTO and initial findings for selected NEA member countries. (authors)

Recurrent Education: Policy and Development in OECD Member Countries. Japan.

ERIC Educational Resources Information Center

Moro-oka, Kazufusa

The report on recurrent education in Japan is one of a series describing continuation education in OECD member countries. Intended as a means of liberating individuals from the education-work-leisure-retirement sequence, recurrent education provides freedom to mix and alternate these phases of life within the limits of the socially possible.…

Commentary on the OECD's Programme for International Student Assessment 2012

ERIC Educational Resources Information Center

Froese-Germain, Bernie

2013-01-01

Every three years the focus of the international education community shifts to the release of the Programme for International Student Assessment (PISA) study conducted by the Organisation for Economic Co-operation and Development (OECD). No other international study of education commands as much attention as PISA. In an age of intense global…

Recurrent Education: Policy and Development in OECD Member Countries. Denmark.

ERIC Educational Resources Information Center

Hansen, Berrit

The report on recurrent education in Denmark is one of a series describing continuation education in OECD member countries. Intended as a means of liberating individuals from the education-work-leisure-retirement sequence, recurrent education provides freedom to mix and alternate these phases of life within the limits of the socially possible.…

Review of achievements of the OECD Working Party on Manufactured Nanomaterials' Testing and Assessment Programme. From exploratory testing to test guidelines.

PubMed

Rasmussen, Kirsten; González, Mar; Kearns, Peter; Sintes, Juan Riego; Rossi, François; Sayre, Phil

2016-02-01

This paper charts the almost ten years of history of OECD's work on nanosafety, during which the programme of the OECD on the Testing and Assessment of Manufactured Nanomaterials covered the testing of eleven nanomaterials for about 59 end-points addressing physical-chemical properties, mammalian and environmental toxicity, environmental fate and material safety. An overview of the materials tested, the test methods applied and the discussions regarding the applicability of the OECD test guidelines, which are recognised methods for regulatory testing of chemicals, are given. The results indicate that many existing OECD test guidelines are suitable for nanomaterials and consequently, hazard data collected using such guidelines will fall under OECD's system of Mutual Acceptance of Data (MAD) which is a legally binding instrument to facilitate the international acceptance of information for the regulatory safety assessment of chemicals. At the same time, some OECD test guidelines and guidance documents need to be adapted to address nanomaterials while new test guidelines and guidance documents may be needed to address endpoints that are more relevant to nanomaterials. This paper presents examples of areas where test guidelines or guidance for nanomaterials are under development. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Promoting the 3Rs to enhance the OECD fish toxicity testing framework.

PubMed

Hutchinson, Thomas H; Wheeler, James R; Gourmelon, Anne; Burden, Natalie

2016-04-01

Fish toxicity testing has been conducted since the 1860's in order to help define safe levels of chemical contaminants in lakes, rivers and coastal waters. The historical emphasis on acute lethality testing of chemicals has more recently focussed on long term sublethal effects of chemicals on fish and their prey species. Fish toxicity testing is now embedded in much environment legislation on chemical safety while it is recognized that animal use should be Replaced, Reduced and Refined (the 3Rs) where possible. The OECD Fish Toxicity Testing Framework provides a useful structure with which to address the needs of environmental safety assessment whilst implementing the 3Rs. This commentary aims to promote the implementation of the recommendations of the OECD Fish Toxicity Testing Framework. Copyright © 2016 Elsevier Inc. All rights reserved.

Compensation for effects of ambient temperature on rare-earth doped fiber optic thermometer

NASA Technical Reports Server (NTRS)

Adamovsky, G.; Sotomayor, J. L.; Krasowski, M. J.; Eustace, J. G.

1989-01-01

Variations in ambient temperature have a negative effect on the performance of any fiber optic sensing system. A change in ambient temperature may alter the design parameters of fiber optic cables, connectors, sources, detectors, and other fiber optic components and eventually the performance of the entire system. The thermal stability of components is especially important in a system which employs intensity modulated sensors. Several referencing schemes have been developed to account for the variable losses that occur within the system. However, none of these conventional compensating techniques can be used to stabilize the thermal drift of the light source in a system based on the spectral properties of the sensor material. The compensation for changes in ambient temperature becomes especially important in fiber optic thermometers doped with rare earths. Different approaches to solving this problem are searched and analyzed.

Compensation for effects of ambient temperature on rare-earth doped fiber optic thermometer

NASA Technical Reports Server (NTRS)

Adamovsky, G.; Sotomayor, J. L.; Krasowski, M. J.; Eustace, J. G.

1990-01-01

Variations in ambient temperature have a negative effect on the performance of any fiber optic sensing system. A change in ambient temperature may alter the design parameters of fiber optic cables, connectors, sources, detectors, and other fiber optic components and eventually the performance of the entire system. The thermal stability of components is especially important in a system which employs intensity modulated sensors. Several referencing schemes have been developed to account for the variable losses that occur within the system. However, none of these conventional compensating techniques can be used to stabilize the thermal drift of the light source in a system based on the spectral properties of the sensor material. The compensation for changes in ambient temperature becomes especially important in fiber optic thermometers doped with rare earths. Different approaches to solving this problem are searched and analyzed.

Towards actionable international comparisons of health system performance: expert revision of the OECD framework and quality indicators.

PubMed

Carinci, F; Van Gool, K; Mainz, J; Veillard, J; Pichora, E C; Januel, J M; Arispe, I; Kim, S M; Klazinga, N S

2015-04-01

To review and update the conceptual framework, indicator content and research priorities of the Organisation for Economic Cooperation and Development's (OECD) Health Care Quality Indicators (HCQI) project, after a decade of collaborative work. A structured assessment was carried out using a modified Delphi approach, followed by a consensus meeting, to assess the suite of HCQI for international comparisons, agree on revisions to the original framework and set priorities for research and development. International group of countries participating to OECD projects. Members of the OECD HCQI expert group. A reference matrix, based on a revised performance framework, was used to map and assess all seventy HCQI routinely calculated by the OECD expert group. A total of 21 indicators were agreed to be excluded, due to the following concerns: (i) relevance, (ii) international comparability, particularly where heterogeneous coding practices might induce bias, (iii) feasibility, when the number of countries able to report was limited and the added value did not justify sustained effort and (iv) actionability, for indicators that were unlikely to improve on the basis of targeted policy interventions. The revised OECD framework for HCQI represents a new milestone of a long-standing international collaboration among a group of countries committed to building common ground for performance measurement. The expert group believes that the continuation of this work is paramount to provide decision makers with a validated toolbox to directly act on quality improvement strategies. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

The redistributive effect of health care finance in twelve OECD countries.

PubMed

van Doorslaer, E; Wagstaff, A; van der Burg, H; Christiansen, T; Citoni, G; Di Biase, R; Gerdtham, U G; Gerfin, M; Gross, L; Häkinnen, U; John, J; Johnson, P; Klavus, J; Lachaud, C; Lauritsen, J; Leu, R; Nolan, B; Pereira, J; Propper, C; Puffer, F; Rochaix, L; Schellhorn, M; Sundberg, G; Winkelhake, O

1999-06-01

The OECD countries finance their health care through a mixture of taxes, social insurance contributions, private insurance premiums and out-of-pocket payments. The various payment sources have very different implications for both vertical and horizontal equity and on redistributive effect which is a function of both. This paper presents results on the income redistribution consequences of the health care financing mixes adopted in twelve OECD countries by decomposing the overall income redistributive effect into a progressivity, horizontal inequity and reranking component. The general finding of this study is that the vertical effect is much more important than horizontal inequity and reranking in determining the overall redistributive effect but that their relative importance varies by source of payment. Public finance sources tend to have small positive redistributive effects and less differential treatment while private financing sources generally have (larger) negative redistributive effects which are to a substantial degree caused by differential treatment.

Human Capital: How What You Know Shapes Your Life. OECD Insights

ERIC Educational Resources Information Center

Keeley, Brian

2007-01-01

This first book in the new OECD Insights Series examines the increasing economic and social importance of human capital--our education, skills, competencies, and knowledge. As economies in developed countries shift away from manufacturing, economic success for individuals and national economies is increasingly reliant on the quality of human…

Robust Platinum Resistor Thermometer (PRT) Sensors and Reliable Bonding for Space Missions

NASA Technical Reports Server (NTRS)

Cucullu, Gordy C., III; Mikhaylov, Rebecca; Rajeshuni, Ramesham; Petkov, Mihail; Hills, David; Uribe, Jose; Okuno, James; De Los Santos, Greg

2013-01-01

Platinum resistance thermometers (PRTs) provide accurate temperature measurements over a wide temperature range and are used extensively on space missions due to their simplicity and linearity. A standard on spacecraft, PRTs are used to provide precision temperature control and vehicle health assessment. This paper reviews the extensive reliability testing of platinum resistor thermometer sensors (PRTs) and bonding methods used on the Mars Science Laboratory (MSL) mission and for the upcoming Soil Moisture Active Passive (SMAP) mission. During the Mars Exploration Rover (MER) mission, several key, JPL-packaged PRTs failed on those rovers prior to and within 1-Sol of landing due to thermally induced stresses. Similar failures can be traced back to other JPL missions dating back thirty years. As a result, MSL sought out a PRT more forgiving to the packaging configurations used at JPL, and extensively tested the Honeywell HRTS-5760-B-U-0-12 sensor to successfully demonstrate suitable robustness to thermal cycling. Specifically, this PRT was cycled 2,000 times, simulating three Martian winters and summers. The PRTs were bonded to six substrate materials (Aluminum 7050, treated Magnesium AZ231-B, Stainless Steel 304, Albemet, Titanium 6AL4V, and G-10), using four different aerospace adhesives--two epoxies and two silicones--that conformed to MSL's low out-gassing requirements. An additional epoxy was tested in a shorter environmental cycling test, when the need for a different temperature range adhesive was necessary for mobility and actuator hardware late in the fabrication process. All of this testing, along with electrostatic discharge (ESD) and destructive part analyses, demonstrate that this PRT is highly robust, and not subject to the failure of PRTs on previous missions. While there were two PRTs that failed during fabrication, to date there have been no in-flight PRT failures on MSL, including those on the Curiosity rover. Since MSL, the sensor has gone through

Robust Platinum Resistor Thermometer (PRT) Sensors and Reliable Bonding for Space Missions

NASA Technical Reports Server (NTRS)

Cucullu, Gordy C. III; Mikhaylov, Rebecca; Ramesham, Rajeshuni; Petkov, Mihail; Hills, David; Uribe, Jose; Okuno, James; De Los Santos, Greg

2013-01-01

Platinum resistance thermometers (PRTs) provide accurate temperature measurements over a wide temperature range and are used extensively on space missions due to their simplicity and linearity. A standard on spacecraft, PRTs are used to provide precision temperature control and vehicle health assessment. This paper reviews the extensive reliability testing of platinum resistor thermometer sensors (PRTs) and bonding methods used on the Mars Science Laboratory (MSL) mission and for the upcoming Soil Moisture Active Passive (SMAP) mission. During the Mars Exploration Rover (MER) mission, several key, JPL-packaged PRTs failed on those rovers prior to and within 1-Sol of landing due to thermally induced stresses. Similar failures can be traced back to other JPL missions dating back thirty years. As a result, MSL sought out a PRT more forgiving to the packaging configurations used at JPL, and extensively tested the Honeywell HRTS-5760-B-U-0-12 sensor to successfully demonstrate suitable robustness to thermal cycling. Specifically, this PRT was cycled 2,000 times, simulating three Martian winters and summers. The PRTs were bonded to six substrate materials (Aluminum 7050, treated Magnesium AZ231-B, Stainless Steel 304, Albemet, Titanium 6AL4V, and G-10), using four different aerospace adhesives--two epoxies and two silicones--that conformed to MSL's low out-gassing requirements. An additional epoxy was tested in a shorter environmental cycling test, when the need for a different temperature range adhesive was necessary for mobility and actuator hardware late in the fabrication process. All of this testing, along with electrostatic discharge (ESD) and destructive part analyses, demonstrate that this PRT is highly robust, and not subject to the failure of PRTs on previous missions. While there were two PRTs that failed during fabrication, to date there have been no in-flight PRT failures on MSL, including those on the Curiosity rover. Since MSL, the sensor has gone through

Identifying positively deviant elderly medical wards using routinely collected NHS Safety Thermometer data: an observational study

PubMed Central

Taylor, Natalie; Kellar, Ian; Pye, Victoria; Mohammed, Mohammed A; Lawton, Rebecca

2018-01-01

Objective The positive deviance approach seeks to identify and learn from exceptional performers. Although a framework exists to apply positive deviance within healthcare organisations, there is limited guidance to support its implementation. The approach has also rarely explored exceptional performance on broad outcomes, been implemented at ward level, or applied within the UK. This study develops and critically appraises a pragmatic method for identifying positively deviant wards using a routinely collected, broad measure of patient safety. Design A two-phased observational study was conducted. During phase 1, cross-sectional and temporal analyses of Safety Thermometer data were conducted to identify a discrete group of positively deviant wards that consistently demonstrated exceptional levels of safety. A group of matched comparison wards with above average performances were also identified. During phase 2, multidisciplinary staff and patients on the positively deviant and comparison wards completed surveys to explore whether their perceptions of safety supported the identification of positively deviant wards. Setting 34 elderly medical wards within a northern region of England, UK. Participants Multidisciplinary staff (n=161) and patients (n=188) clustered within nine positively deviant and comparison wards. Results Phase 1: A combination of analyses identified five positively deviant wards that performed best in the region, outperformed their organisation and performed consistently well over 12 months. Five above average matched comparator wards were also identified. Phase 2: Staff and patient perceptions of safety generally supported the identification of positively deviant wards using Safety Thermometer data, although patient perceptions of safety were less concordant with the routinely collected data. Conclusions This study tentatively supports a pragmatic method of using routinely collected data to identify positively deviant elderly medical wards; however

Anticonvulsant properties of alpha, gamma, and alpha, gamma-substituted gamma-butyrolactones.

PubMed

Klunk, W E; Covey, D F; Ferrendelli, J A

1982-09-01

Derivatives of gamma-butyrolactone (GBL) substituted on the alpha- and/or gamma-positions were synthesized and tested for their effects on behavior in mice, on the electroencephalographs and blood pressure of paralyzed-ventilated guinea pigs, and on electrical activity of incubated hippocampal slices. Several compounds, including alpha-ethyl-alpha-methyl GBL (alpha-EMGBL), alpha, alpha-dimethyl GBL, alpha, gamma-diethyl-alpha, gamma-dimethyl GBL, and gamma-ethyl-gamma-methyl GBL, prevented seizures induced by pentylenetetrazol, beta-ethyl-beta-methyl-gamma-butyrolactone (beta-EMGBL), picrotoxin, or all three compounds in mice and guinea pigs but had no effect on seizures induced by maximal electroshock or bicuculline. Neither gamma-hydroxybutyrate (GHB) nor alpha-isopropylidine GBL had any anticonvulsant activity. The anticonvulsant alpha-substituted compounds had a potent hypotensive effect and antagonized the hypertensive effect of beta-EMGBL, alpha-EMGBL was tested in incubated hippocampal slices and was found to depress basal activity and antagonize excitation induced by beta-EMGBL. These results demonstrate that alpha-alkyl-substituted GBL and, to a lesser extent, gamma-substituted derivatives are anticonvulsant agents and that their effects are strikingly different from those of GHB or beta-alkyl-substituted GBLs, which are epileptogenic. Possibly beta- and alpha-substituted GBLs act at the same site as agonists and antagonists, respectively.

AN OVERVIEW OF OECD AND EPA/ORD ACTIVITIES RELATED TO AMPHIBIAN TESTING

EPA Science Inventory

There has been significant recent activity related to testing amphibians in a regulatory setting. Much of this has emanated from interest by the US Environmental Protection Agency (EPA) and the Office of Economic Cooperation and Development (OECD) in utilizing amphibians in scree...

Supporting Entrepreneurship and Innovation in Higher Education in Poland. OECD Skills Studies

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

This report presents evidence-based analysis on Poland's higher education transformation process towards an innovative, interconnected and multidisciplinary entrepreneurial system, designed to empower its students and staff to demonstrate enterprise, innovation and creativity in teaching, research and societal engagement. Using the OECD-European…

Supporting Entrepreneurship and Innovation in Higher Education in Ireland. OECD Skills Studies

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

This report presents evidence-based analysis on Ireland's higher education transformation process towards an innovative, interconnected and multidisciplinary entrepreneurial system, designed to empower its students and staff to demonstrate enterprise, innovation and creativity in teaching, research and societal engagement. Using the OECD-European…

[The changing role of the state in health care systems in OECD countries--research questions, research design and first results].

PubMed

Helmert, U; Cacace, M; Grimmeisen, S; Wendt, C; Rothgang, H

2005-02-01

In the framework of the DFG-Research-Unit 597 "Transformation of the State" is Project C3 investigating the change of the role of the state in health care systems in OECD-countries between 1970 and 2000. The primary research hypothesis is, that a tendency of convergence exists regarding the role of the state for the three main dimensions of health care systems, namely service provision, financing and regulation. This is carried out firstly based on a quantitative oriented analysis for 23 OECD-countries, utilising the data set "OECD Health Data 2002", and secondly with qualitative oriented country-studies for England, Germany and the U.S. Findings for the qualitative country-studies give some hints of convergence regarding the "private-public-mix" between the health system types "social insurance" (Germany), "national health system" (England), and "market oriented health system" (USA). First quantitative results concerning the changing role of the state in relation to the health care systems in OECD-countries provide evidence for a convergence process between these states in the financing dimension. For the dependent variable "total health care costs in % of gross domestic product" a trend of convergence is observed for the members states of the European Union (n = 12), while in the remaining Non-EU countries (n = 11) a trend of divergence is identified. For the same parameter we found a convergence for OECD-countries of the type "national health system" (n = 14). For OECD-countries of the type "social insurance" (n = 8) this convergence process is observed only for the time period 1970 - 1980. Some results confirm the hypothesis of the "growth to limits" (Flora). But it appears to us that in future other significant factors like globalisation processes, the increasing potentials of the medical technology and demographic changes may play an important role for the overall health budget and specific needs of the population in the OECD-states.

Response time correlations for platinum resistance thermometers in flowing fluids

NASA Technical Reports Server (NTRS)

Pandey, D. K.; Ash, R. L.

1985-01-01

The thermal response of two types of Platinum Resistance Thermometers (PRT's), which are being considered for use in the National Transonic Wind Tunnel Facility, were studied. Response time correlations for each PRT, in flowing water, oil and air, were established separately. A universal correlation, tau WOA = 2.0 + 1264, 9/h, for a Hy-Cal Sensor (with a reference resistance of 100 ohm) within an error of 20% was established while the universal correlation for the Rosemount Sensor (with a reference resistance of 1000 ohm), tau OA = 0.122 + 1105.6/h, was found with a maximum percentage error of 30%. The correlation for the Rosemount Sensor was based on air and oil data only which is certainly not sufficient to make a correlation applicable to every condition. Therefore, the correlation needs more data to be gathered in different fluids. Also, it is necessary to state that the calculation of the parameter, h, was based on the available heat transfer correlations, whose accuracies are already reported in literature uncertain within 20-30%. Therefore, the universal response constant correlations established here for the Hy-Cal and Rosemount sensors are consistent with the uncertainty in the input data and are recommended for future use in flowing liquids and gases.

Deaths from international terrorism compared with road crash deaths in OECD countries

PubMed Central

Wilson, N; Thomson, G

2005-01-01

Methods: Data on deaths from international terrorism (US State Department database) were collated (1994–2003) and compared to the road injury deaths (year 2000 and 2001 data) from the OECD International Road Transport Accident Database. Results: In the 29 OECD countries for which comparable data were available, the annual average death rate from road injury was approximately 390 times that from international terrorism. The ratio of annual road to international terrorism deaths (averaged over 10 years) was lowest for the United States at 142 times. In 2001, road crash deaths in the US were equal to those from a September 11 attack every 26 days. Conclusions: There is a large difference in the magnitude of these two causes of deaths from injury. Policy makers need to be aware of this when allocating resources to preventing these two avoidable causes of mortality. PMID:16326764

Inhalation toxicity studies: OECD guidelines in relation to REACH and scientific developments.

PubMed

Arts, Josje H E; Muijser, H; Jonker, D; van de Sandt, J J M; Bos, P M J; Feron, V J

2008-06-01

The OECD Health Effects Test Guidelines (TGs) provide guidance concerning the use of methods for the identification and characterization of hazards from chemical substances. These TGs are largely based on tests in routine use for many years and are known to yield information relevant to various types of toxicity. They have proven their value in practice and will remain of paramount importance for decades to come. However, the TGs describe mostly animal assays, and there is an increasingly strong urge to reduce animal testing on ethical grounds. In addition, assessment procedures are generally considered too slow and too rigid, which has resulted in elaborate testing of a relatively small number of chemicals, while virtually nothing is known about the vast majority of compounds. The major objectives of Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) are to improve the knowledge about the properties and use of chemicals and to speed up the procedure of risk assessment. The REACH text contains information requirements that can be met by OECD TGs but REACH also provides rules for adaptation of the standard testing regime. Also, various components of "Intelligent Testing Strategies" are described in order to limit animal testing. This paper briefly describes the OECD TGs for inhalation toxicity studies, including those in preparation, and their role in future hazard identification. This will be discussed in relation to the evaluation of the safety of thousands of chemicals in a relatively short period of time and scientific developments, including the use of alternatives to animal testing.

IMHE-Info. OECD Programme on Institutional Management in Higher Education, December 2007

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2007

2007-01-01

IMHE-Info is the newsletter published by the Institutional Management in Higher Education (IMHE) programme. This issue includes: (1) How Do Rankings Impact on Higher Education?; and (2) OECD International Assessment of Higher Education Outcomes. IMHE News, publications of interest and upcoming events are included.

Magnetic Thermometer: Thermal effect on the Agglomeration of Magnetic Nanoparticles by Magnetic field

NASA Astrophysics Data System (ADS)

Jin, Daeseong; Kim, Hackjin

2018-03-01

We have investigated the agglomeration of magnetite nanoparticles in the aqueous solution under magnetic field by measuring temporal change of magnetic weight. The magnetic weight corresponds to the force due to the magnetization of magnetic materials. Superparamagnetic magnetite nanoparticles are synthesized and used in this work. When the aqueous solution of magnetite nanoparticle is placed under magnetic field, the magnetic weight of the sample jumps instantaneously by Neel and Brown mechanisms and thereafter increases steadily following a stretched exponential function as the nanoparticles agglomerate, which results from the distribution of energy barriers involved in the dynamics. Thermal motions of nanoparticles in the agglomerate perturb the ordered structure of the agglomerate to reduce the magnetic weight. Fluctuation of the structural order of the agglomerate by temperature change is much faster than the formation of agglomerate and explained well with the Boltzmann distribution, which suggests that the magnetic weight of the agglomerate works as a magnetic thermometer.

Optical Probe of the Superconducting Normal Mixed State in a Magnetic Penetration Thermometer

NASA Technical Reports Server (NTRS)

Stevenson, T. R.; Balvin, M. A.; Bandler, S. R.; Denis, K. L.; Lee, S. -J.; Nagler, P. C.; Smith, S. J.

2016-01-01

Using ultraviolet photon pulses, we have probed the internal behavior of a molybdenum-gold Magnetic Penetration Thermometer (MPT) that we designed for x-ray microcalorimetry. In this low-temperature detector, the diamagnetic response of a superconducting MoAu bilayer is used to sense temperature changes in response to absorbed photons. We have previously described an approximate model that explains the high responsivity of the detector to temperature changes as a consequence of a Meissner transition of the molybdenum-gold film in the magnetic field applied by the superconducting circuit used to bias the detector. We compare measurements of MPT heat capacity and thermal conductance, derived from UV photon pulse data, to our model predictions for the thermodynamic properties of the sensor and for the electron cooling obtained by quasiparticle recombination. Our data on electron cooling power is also relevant to the operation of other superconducting detectors, such as Microwave Kinetic Inductance Detectors.

OECD Handbook for Internationally Comparative Education Statistics: Concepts, Standards, Definitions and Classifications

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

For well over two decades, the OECD has developed and published a broad range of comparative indicators published yearly in the flagship publication "Education at a Glance." These provide insights into the functioning of education systems, such as the participation and progress through education, the human and financial resources…

Fathers’ Leave and Fathers’ Involvement: Evidence from Four OECD Countries

PubMed Central

Huerta, Maria C.; Adema, Willem; Baxter, Jennifer; Han, Wen-Jui; Lausten, Mette; Lee, RaeHyuck; Waldfogel, Jane

2016-01-01

In recent years, several OECD countries have taken steps to promote policies encouraging fathers to spend more time caring for young children, thereby promoting a more gender equal division of care work. Evidence, mainly for the United States and United Kingdom, has shown fathers taking some time off work around childbirth are more likely to be involved in childcare related activities than fathers who do not take time off. This paper conducts a first cross-national analysis on the association between fathers’ leave taking and fathers’ involvement when children are young. It uses birth cohort data of children born around 2000 from four OECD countries: Australia, Denmark, the United Kingdom and the United States. Results show that the majority of fathers take time off around childbirth independent of the leave policies in place. In all countries, except Denmark, important socio-economic differences between fathers who take leave and those who do not are observed. In addition, fathers who take leave, especially those taking two weeks or more, are more likely to carry out childcare related activities when children are young. This study adds to the evidence that suggests that parental leave for fathers is positively associated with subsequent paternal involvement. PMID:28479865

A systematic review of medical practice variation in OECD countries.

PubMed

Corallo, Ashley N; Croxford, Ruth; Goodman, David C; Bryan, Elisabeth L; Srivastava, Divya; Stukel, Therese A

2014-01-01

Major variations in medical practice have been documented internationally. Variations raise questions about the quality, equity, and efficiency of resource allocation and use, and have important implications for health care and health policy. To perform a systematic review of the peer-reviewed literature on medical practice variations in OECD countries. We searched MEDLINE to find publications on medical practice variations in OECD countries published between 2000 and 2011. We present an overview of the characteristics of published studies as well as the magnitude of variations for select high impact conditions. A total of 836 studies were included. Consistent with the gray literature, there were large variations across regions, hospitals and physician practices for almost every condition and procedure studied. Many studies focused on high-impact conditions, but very few looked at the causes or outcomes of medical practice variations. While there were an overwhelming number of publications on medical practice variations the coverage was broad and not often based on a theoretical construct. Future studies should focus on conditions and procedures that are clinically important, policy relevant, resource intensive, and have high levels of public awareness. Further study of the causes and consequences of variations is important. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The OECD and Educational Policy Reform: International Surveys, Governance, and Policy Evidence

ERIC Educational Resources Information Center

Volante, Louis; Fazio, Xavier; Ritzen, Jo

2017-01-01

Over the past 50 years, the Organisation for Economic Cooperation and Development (OECD) has increasingly influenced the nature and scope of education policies in primary, secondary, and tertiary sectors around the world. Policy suggestions in these sectors primarily stem from the results of their various international surveys such as the…

Starting Strong 2017: Key OECD Indicators on Early Childhood Education and Care

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

Early childhood education and care (ECEC) can help lay the foundations for future skills development, well-being and learning. Having timely, reliable and comparable international information is essential to help countries improve their ECEC services and systems. For over 15 years, the OECD has been conducting policy analysis and gathering new…

Educational Differentiation Policies and the Performance of Disadvantaged Students across OECD Countries

ERIC Educational Resources Information Center

Castejón, Alba; Zancajo, Adrián

2015-01-01

This article focuses on analysing the effect of educational differentiation policies of OECD educational systems on socioeconomically disadvantaged students, based on data from PISA 2009. The analysis is conducted on the basis of a definition of two subgroups of disadvantaged students: those that achieve high scores, and those obtaining scores…

Strengthening Innovation in the Netherlands: Making Better Use of Knowledge Creation in Innovation Activities. OECD Economics Department Working Papers, No. 479

ERIC Educational Resources Information Center

Carey, David; Ernst, Ekkehard; Oyomopito, Rebecca; Theisens, Jelte

2006-01-01

Strengthening the innovation system in the Netherlands is a priority for raising productivity growth, which has been relatively weak in recent years. Knowledge creation in the Netherlands is strong -- scientific publications per capita are the sixth highest in the OECD -- but innovation activity is only around the average for OECD countries…

Monoterpene 'thermometer' of tropical forest-atmosphere response to climate warming.

PubMed

Jardine, Kolby J; Jardine, Angela B; Holm, Jennifer A; Lombardozzi, Danica L; Negron-Juarez, Robinson I; Martin, Scot T; Beller, Harry R; Gimenez, Bruno O; Higuchi, Niro; Chambers, Jeffrey Q

2017-03-01

Tropical forests absorb large amounts of atmospheric CO 2 through photosynthesis but elevated temperatures suppress this absorption and promote monoterpene emissions. Using 13 CO 2 labeling, here we show that monoterpene emissions from tropical leaves derive from recent photosynthesis and demonstrate distinct temperature optima for five groups (Groups 1-5), potentially corresponding to different enzymatic temperature-dependent reaction mechanisms within β-ocimene synthases. As diurnal and seasonal leaf temperatures increased during the Amazonian 2015 El Niño event, leaf and landscape monoterpene emissions showed strong linear enrichments of β-ocimenes (+4.4% °C -1 ) at the expense of other monoterpene isomers. The observed inverse temperature response of α-pinene (-0.8% °C -1 ), typically assumed to be the dominant monoterpene with moderate reactivity, was not accurately simulated by current global emission models. Given that β-ocimenes are highly reactive with respect to both atmospheric and biological oxidants, the results suggest that highly reactive β-ocimenes may play important roles in the thermotolerance of photosynthesis by functioning as effective antioxidants within plants and as efficient atmospheric precursors of secondary organic aerosols. Thus, monoterpene composition may represent a new sensitive 'thermometer' of leaf oxidative stress and atmospheric reactivity, and therefore a new tool in future studies of warming impacts on tropical biosphere-atmosphere carbon-cycle feedbacks. © 2016 John Wiley & Sons Ltd.

In vitro genotoxicity testing strategy for nanomaterials and the adaptation of current OECD guidelines

PubMed Central

Doak, S.H.; Manshian, B.; Jenkins, G.J.S.; Singh, N.

2012-01-01

There is a pressing requirement to define a hazard identification and risk management strategy for nanomaterials due to the rapid growth in the nanotechnology industry and their promise of life-style revolutions through the development of wide-ranging nano-containing consumer products. Consequently, a battery of well defined and appropriate in vitro assays to assess a number of genotoxicity endpoints is required to minimise extensive and costly in vivo testing. However, the validity of the established protocols in current OECD recognised genotoxicity assays for nanomaterials is currently being questioned. In this report, we therefore consider the in vitro OECD genotoxicity test battery including the Ames, micronucleus and HPRT forward mutation assays, and their potential role in the safety assessment of nanomaterial induced DNA damage in vitro. PMID:21971291

Rebuilding Schools after the Wenchuan Earthquake: China Visits OECD, Italy and Turkey

ERIC Educational Resources Information Center

CELE Exchange, 2009

2009-01-01

As the reconstruction efforts continue in China in the wake of the Great Wenchuan earthquake in May 2008, the China Development Research Foundation, with the support of the OECD Centre for Effective Learning Environments, organised an International Training Programme on the Post-Earthquake Reconstruction of Public Facilities from 1 to 11 December…

Impacts of informal caregiver availability on long-term care expenditures in OECD countries.

PubMed

Yoo, Byung-Kwang; Bhattacharya, Jay; McDonald, Kathryn M; Garber, Alan M

2004-12-01

To quantify the effects of informal caregiver availability and public funding on formal long-term care (LTC) expenditures in developed countries. Secondary data were acquired for 15 Organization for Economic Cooperation and Development (OECD) countries from 1970 to 2000. Secondary data analysis, applying fixed- and random-effects models to time-series cross-sectional data. Outcome variables are inpatient or home heath LTC expenditures. Key explanatory variables are measures of the availability of informal caregivers, generosity in public funding for formal LTC, and the proportion of the elderly population in the total population. Aggregated macro data were obtained from OECD Health Data, United Nations Demographic Yearbooks, and U.S. Census Bureau International Data Base. Most of the 15 OECD countries experienced growth in LTC expenditures over the study period. The availability of a spouse caregiver, measured by male-to-female ratio among the elderly, is associated with a $28,840 (1995 U.S. dollars) annual reduction in formal LTC expenditure per additional elderly male. Availability of an adult child caregiver, measured by female labor force participation and full-time/part-time status shift, is associated with a reduction of $310 to $3,830 in LTC expenditures. These impacts on LTC expenditure vary across countries and across time within a country. The availability of an informal caregiver, particularly a spouse caregiver, is among the most important factors explaining variation in LTC expenditure growth. Long-term care policies should take into account behavioral responses: decreased public funding in LTC may lead working women to leave the labor force to provide more informal care.

A Retrospective Performance Assessment of the Developmental Neurotoxicity Study in Support of OECD Test Guideline 426

PubMed Central

Makris, Susan L.; Raffaele, Kathleen; Allen, Sandra; Bowers, Wayne J.; Hass, Ulla; Alleva, Enrico; Calamandrei, Gemma; Sheets, Larry; Amcoff, Patric; Delrue, Nathalie; Crofton, Kevin M.

2009-01-01

Objective We conducted a review of the history and performance of developmental neurotoxicity (DNT) testing in support of the finalization and implementation of Organisation of Economic Co-operation and Development (OECD) DNT test guideline 426 (TG 426). Information sources and analysis In this review we summarize extensive scientific efforts that form the foundation for this testing paradigm, including basic neurotoxicology research, interlaboratory collaborative studies, expert workshops, and validation studies, and we address the relevance, applicability, and use of the DNT study in risk assessment. Conclusions The OECD DNT guideline represents the best available science for assessing the potential for DNT in human health risk assessment, and data generated with this protocol are relevant and reliable for the assessment of these end points. The test methods used have been subjected to an extensive history of international validation, peer review, and evaluation, which is contained in the public record. The reproducibility, reliability, and sensitivity of these methods have been demonstrated, using a wide variety of test substances, in accordance with OECD guidance on the validation and international acceptance of new or updated test methods for hazard characterization. Multiple independent, expert scientific peer reviews affirm these conclusions. PMID:19165382

A Comparative Evaluation of Pisa 2003-2006 Results in Reading Literacy Skills: An Example of Top-Five OECD Countries and Turkey

ERIC Educational Resources Information Center

Aydin, Ayhan; Erdagf, Coskun; Tas, Nuray

2011-01-01

In this study it is aimed to describe and evaluate comparatively the reading literacy exam results, the finance of education and schools, and socio-cultural status of parents in Turkey and the top-five OECD countries, Finland, Korea, Canada, Australia, New Zealand respectively, in the light reports and publications by OECD regarding PISA 2003 and…

gamma-Hexachlorocyclohexane (gamma-HCH)

Integrated Risk Information System (IRIS)

gamma - Hexachlorocyclohexane ( gamma - HCH ) ; CASRN 58 - 89 - 9 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Asse

Convergence of Educational Attainment Levels in the OECD: More Data, More Problems?

ERIC Educational Resources Information Center

Crespo Cuaresma, Jesus

2006-01-01

This note shows that the dynamics of the dispersion of educational attainment across OECD countries in the period 1960-1990 differ enormously depending on the dataset used, as do the results of the test of significance in the change of the cross-country standard deviation of schooling years between subperiods. The three datasets studied (the…

Identifying positively deviant elderly medical wards using routinely collected NHS Safety Thermometer data: an observational study.

PubMed

Baxter, Ruth; Taylor, Natalie; Kellar, Ian; Pye, Victoria; Mohammed, Mohammed A; Lawton, Rebecca

2018-02-16

The positive deviance approach seeks to identify and learn from exceptional performers. Although a framework exists to apply positive deviance within healthcare organisations, there is limited guidance to support its implementation. The approach has also rarely explored exceptional performance on broad outcomes, been implemented at ward level, or applied within the UK. This study develops and critically appraises a pragmatic method for identifying positively deviant wards using a routinely collected, broad measure of patient safety. A two-phased observational study was conducted. During phase 1, cross-sectional and temporal analyses of Safety Thermometer data were conducted to identify a discrete group of positively deviant wards that consistently demonstrated exceptional levels of safety. A group of matched comparison wards with above average performances were also identified. During phase 2, multidisciplinary staff and patients on the positively deviant and comparison wards completed surveys to explore whether their perceptions of safety supported the identification of positively deviant wards. 34 elderly medical wards within a northern region of England, UK. Multidisciplinary staff (n=161) and patients (n=188) clustered within nine positively deviant and comparison wards. Phase 1: A combination of analyses identified five positively deviant wards that performed best in the region, outperformed their organisation and performed consistently well over 12 months. Five above average matched comparator wards were also identified. Phase 2: Staff and patient perceptions of safety generally supported the identification of positively deviant wards using Safety Thermometer data, although patient perceptions of safety were less concordant with the routinely collected data. This study tentatively supports a pragmatic method of using routinely collected data to identify positively deviant elderly medical wards; however, it also highlights the various challenges that are faced

Selective Shielding of Bone Marrow: An Approach to Protecting Humans from External Gamma Radiation.

PubMed

Waterman, Gideon; Kase, Kenneth; Orion, Itzhak; Broisman, Andrey; Milstein, Oren

2017-09-01

The current feasibility of protecting emergency responders through bone marrow selective shielding is highlighted in the recent OECD/NEA report on severe accident management. Until recently, there was no effective personal protection from externally penetrating gamma radiation. In Chernobyl, first-responders wore makeshift lead sheeting, whereas in Fukushima protective equipment from gamma radiation was not available. Older protective solutions that use thin layers of shielding over large body surfaces are ineffective for energetic gamma radiation. Acute exposures may result in Acute Radiation Syndrome where the survival-limiting factor up to 10 Gy uniform, homogeneous exposure is irreversible bone marrow damage. Protracted, lower exposures may result in malignancies of which bone marrow is especially susceptible, being compounded by leukemia's short latency time. This highlights the importance of shielding bone marrow for preventing both deterministic and stochastic effects. Due to the extraordinary regenerative potential of hematopoietic stem cells, to effectively prevent the deterministic effects of bone marrow exposure, it is sufficient to protect only a small fraction of this tissue. This biological principle allows for a new class of equipment providing unprecedented attenuation of radiation to select marrow-rich regions, deferring the hematopoietic sub-syndrome of Acute Radiation Syndrome to much higher doses. As approximately half of the body's active bone marrow resides within the pelvis region, shielding this area holds great promise for preventing the deterministic effects of bone marrow exposure and concomitantly reducing stochastic effects. The efficacy of a device that selectively shields this region and other radiosensitive organs in the abdominal area is shown here.

Unidentified Gamma-Ray Sources: Hunting Gamma-Ray Blazars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Massaro, F.; D'Abrusco, R.; Tosti, G.

2012-04-02

One of the main scientific objectives of the ongoing Fermi mission is unveiling the nature of the unidentified {gamma}-ray sources (UGSs). Despite the large improvements of Fermi in the localization of {gamma}-ray sources with respect to the past {gamma}-ray missions, about one third of the Fermi-detected objects are still not associated to low energy counterparts. Recently, using the Wide-field Infrared Survey Explorer (WISE) survey, we discovered that blazars, the rarest class of Active Galactic Nuclei and the largest population of {gamma}-ray sources, can be recognized and separated from other extragalactic sources on the basis of their infrared (IR) colors. Basedmore » on this result, we designed an association method for the {gamma}-ray sources to recognize if there is a blazar candidate within the positional uncertainty region of a generic {gamma}-ray source. With this new IR diagnostic tool, we searched for {gamma}-ray blazar candidates associated to the UGS sample of the second Fermi {gamma}-ray catalog (2FGL). We found that our method associates at least one {gamma}-ray blazar candidate as a counterpart each of 156 out of 313 UGSs analyzed. These new low-energy candidates have the same IR properties as the blazars associated to {gamma}-ray sources in the 2FGL catalog.« less

UNIDENTIFIED {gamma}-RAY SOURCES: HUNTING {gamma}-RAY BLAZARS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Massaro, F.; Ajello, M.; D'Abrusco, R.

2012-06-10

One of the main scientific objectives of the ongoing Fermi mission is unveiling the nature of unidentified {gamma}-ray sources (UGSs). Despite the major improvements of Fermi in the localization of {gamma}-ray sources with respect to the past {gamma}-ray missions, about one-third of the Fermi-detected objects are still not associated with low-energy counterparts. Recently, using the Wide-field Infrared Survey Explorer survey, we discovered that blazars, the rarest class of active galactic nuclei and the largest population of {gamma}-ray sources, can be recognized and separated from other extragalactic sources on the basis of their infrared (IR) colors. Based on this result, wemore » designed an association method for the {gamma}-ray sources to recognize if there is a blazar candidate within the positional uncertainty region of a generic {gamma}-ray source. With this new IR diagnostic tool, we searched for {gamma}-ray blazar candidates associated with the UGS sample of the second Fermi {gamma}-ray LAT catalog (2FGL). We found that our method associates at least one {gamma}-ray blazar candidate as a counterpart to each of 156 out of 313 UGSs analyzed. These new low-energy candidates have the same IR properties as the blazars associated with {gamma}-ray sources in the 2FGL catalog.« less

The Legitimation of OECD's Global Educational Governance: Examining PISA and AHELO Test Production

ERIC Educational Resources Information Center

Morgan, Clara; Shahjahan, Riyad A.

2014-01-01

Although international student assessments and the role of international organisations (IOs) in governing education via an evidence-based educational policy discourse are of growing interest to educational researchers, few have explored the complex ways in which an IO, such as the OECD, gains considerable influence in governing education during…

Patterns of Parental Involvement in Selected OECD Countries: Cross-National Analyses of PISA

ERIC Educational Resources Information Center

Hartas, Dimitra

2015-01-01

Using data from the Programme for International Student Assessment (PISA), patterns of parental involvement were examined in selected OECD countries. The findings showed that, irrespective of educational qualifications, parents were frequently involved in their children's learning at the start of primary school and at age 15. Cross-national…

Alternative Test Methods for Developmental Neurotoxicity: A History and Path Forward (OECD EFSA workshop)

EPA Science Inventory

Exposure to environmental contaminants is well documented to adversely impact the development of the nervous system. However, the time, animal and resource intensive EPA and OECD testing guideline methods for developmental neurotoxicity (DNT) are not a viable solution to characte...

Impacts of Informal Caregiver Availability on Long-term Care Expenditures in OECD Countries

PubMed Central

Yoo, Byung-Kwang; Bhattacharya, Jay; McDonald, Kathryn M; Garber, Alan M

2004-01-01

Objective To quantify the effects of informal caregiver availability and public funding on formal long-term care (LTC) expenditures in developed countries. Data Source/Study Setting Secondary data were acquired for 15 Organization for Economic Cooperation and Development (OECD) countries from 1970 to 2000. Study Design Secondary data analysis, applying fixed- and random-effects models to time-series cross-sectional data. Outcome variables are inpatient or home heath LTC expenditures. Key explanatory variables are measures of the availability of informal caregivers, generosity in public funding for formal LTC, and the proportion of the elderly population in the total population. Data Collection/Extraction Method Aggregated macro data were obtained from OECD Health Data, United Nations Demographic Yearbooks, and U.S. Census Bureau International Data Base. Principal Findings Most of the 15 OECD countries experienced growth in LTC expenditures over the study period. The availability of a spouse caregiver, measured by male-to-female ratio among the elderly, is associated with a $28,840 (1995 U.S. dollars) annual reduction in formal LTC expenditure per additional elderly male. Availability of an adult child caregiver, measured by female labor force participation and full-time/part-time status shift, is associated with a reduction of $310 to $3,830 in LTC expenditures. These impacts on LTC expenditure vary across countries and across time within a country. Conclusions The availability of an informal caregiver, particularly a spouse caregiver, is among the most important factors explaining variation in LTC expenditure growth. Long-term care policies should take into account behavioral responses: decreased public funding in LTC may lead working women to leave the labor force to provide more informal care. PMID:15544640

Measuring User-Created Content: Implications for the ICT Access and Use by Households and Individuals Surveys. OECD Digital Economy Papers, No. 139

ERIC Educational Resources Information Center

van Beuzekom, Brigitte

2008-01-01

This paper reviews recent measurement work on User-Created Content (UCC) undertaken in OECD countries. It shows that UCC is emerging as a significant area of economic and social activity worthy of consideration for official measurement and discusses the implications for the OECD Model Survey on ICT Access and Use by Households and Individuals.…

Growth kinetics of gamma-prime precipitates in a directionally solidified eutectic, gamma/gamma-prime-delta

NASA Technical Reports Server (NTRS)

Tewari, S. N.

1976-01-01

A directionally solidified eutectic alloy (DSEA), of those viewed as potential candidates for the next generation of aircraft gas turbine blade materials, is studied for the gamma-prime growth kinetics, in the system Ni-Nb-Cr-Al, specifically: Ni-20 w/o Nb-6 w/o Cr-2.5 w/o Al gamma/gamma-prime-delta DSEA. Heat treatment, polishing and etching, and preparation for electron micrography are described, and the size distribution of gamma-prime phase following various anneals is plotted, along with gamma-prime growth kinetics in this specific DSEA, and the cube of gamma-prime particle size vs anneal time. Activation energies and coarsening kinetics are studied.

The neutron-gamma Feynman variance to mean approach: Gamma detection and total neutron-gamma detection (theory and practice)

NASA Astrophysics Data System (ADS)

Chernikova, Dina; Axell, Kåre; Avdic, Senada; Pázsit, Imre; Nordlund, Anders; Allard, Stefan

2015-05-01

Two versions of the neutron-gamma variance to mean (Feynman-alpha method or Feynman-Y function) formula for either gamma detection only or total neutron-gamma detection, respectively, are derived and compared in this paper. The new formulas have particular importance for detectors of either gamma photons or detectors sensitive to both neutron and gamma radiation. If applied to a plastic or liquid scintillation detector, the total neutron-gamma detection Feynman-Y expression corresponds to a situation where no discrimination is made between neutrons and gamma particles. The gamma variance to mean formulas are useful when a detector of only gamma radiation is used or when working with a combined neutron-gamma detector at high count rates. The theoretical derivation is based on the Chapman-Kolmogorov equation with the inclusion of general reactions and corresponding intensities for neutrons and gammas, but with the inclusion of prompt reactions only. A one energy group approximation is considered. The comparison of the two different theories is made by using reaction intensities obtained in MCNPX simulations with a simplified geometry for two scintillation detectors and a 252Cf-source. In addition, the variance to mean ratios, neutron, gamma and total neutron-gamma are evaluated experimentally for a weak 252Cf neutron-gamma source, a 137Cs random gamma source and a 22Na correlated gamma source. Due to the focus being on the possibility of using neutron-gamma variance to mean theories for both reactor and safeguards applications, we limited the present study to the general analytical expressions for Feynman-alpha formulas.

ICT in Initial Teacher Training: Research Review. OECD Education Working Papers, No. 38

ERIC Educational Resources Information Center

Enochsson, Ann-Britt; Rizza, Caroline

2009-01-01

This research review reports on articles presenting empirical research in the area of how teacher-training institutions work on preparing future teachers for the integration of information and communication technologies (ICT) in their future classrooms. It was conducted mainly in English and French and covers research in 11 OECD-countries during…

International Migration, Deindustrialization and Union Decline in 16 Affluent OECD Countries, 1962-1997

ERIC Educational Resources Information Center

Lee, Cheol-Sung

2005-01-01

This article, using unbalanced panel data on 16 affluent OECD countries, tests the effects of diverse aspects of globalization and deindustrialization on unionization trends. In contrast to the recent studies focusing on the conditional role of labor market institutions, this study underlines the role of two structural factors in transforming…

PROGRESS IN THE OECD WORK ON ENDOCRINE DISRUPTORS TESTING AND ASSESSMENT FOR ENVIRONMENTAL SPECIES

EPA Science Inventory

The OECD Special Activity on endocrine disruptors testing and assessment (EDTA) started in 1996 at the request of member countries and industry with the objective to develop test methods for the detection and characterization of endocrine disrupting chemicals. The purpose of the ...

In vitro OECD test methods applied to screen the estrogenic effect of chemicals, used in Korea.

PubMed

Lee, Hee-Seok; Park, Eun-Jung; Han, Songyi; Oh, Gyeong-Yong; Kim, Min-Hee; Kang, Hui-Seung; Suh, Jin-Hyang; Oh, Jae-Ho; Lee, Kwang-Soo; Hwang, Myung-Sil; Moon, Guiim; Hong, Jin-Hwan; Hwang, In-Gyun

2016-09-01

In this study, 27 chemicals found in household products, which became an issue in Korea were screened for the agonistoc and antagonistic effects against human estrogen receptor using official Organization for Economic Cooperation and Development (OECD) in vitro assays, STTA assay using ERα-HeLa-9903 cell line and BG1Luc ER TA assay. In the case of human ER agonist screening by two assays, all tested chemicals did not show agonist effect against ER. In ER antagonist test by BG1Luc ER TA assay, five surfactants α-dodecyl-ω-hydroxypoly(oxyethylene), alcohols C16-18 ethoxylated, nonylphenol, ethoxylated, 3,6,9,12,15,18,21-heptaoxatritriacontan-1-ol, and α-dodecyl-ω-hydroxypoly(oxy-1,2-ethanediyl)) were found to exhibit weak antagonistic activities. The agonist/antagonist effects against human estrogen receptor of various chemicals, used in Korea by OECD test guideline are reported in this study. These results indicated that two OECD in vitro assays will can be applied in Korea by screening of agonistic/antagonistic effects against human ER of various chemicals. Copyright © 2016 Elsevier Ltd. All rights reserved.

Skills Matter: Further Results from the Survey of Adult Skills. OECD Skills Studies

ERIC Educational Resources Information Center

Kankaraš, Miloš; Montt, Guillermo; Paccagnella, Marco; Quintini, Glenda; Thorn, William

2016-01-01

In the wake of the technological revolution that began in the last decades of the 20th century, labour market demand for information-processing and other high-level cognitive and interpersonal skills is growing substantially. The "Survey of Adult Skills," a product of the OECD Programme for the International Assessment of Adult…

Very high-energy gamma rays from gamma-ray bursts.

PubMed

Chadwick, Paula M

2007-05-15

Very high-energy (VHE) gamma-ray astronomy has undergone a transformation in the last few years, with telescopes of unprecedented sensitivity having greatly expanded the source catalogue. Such progress makes the detection of a gamma-ray burst at the highest energies much more likely than previously. This paper describes the facilities currently operating and their chances for detecting gamma-ray bursts, and reviews predictions for VHE gamma-ray emission from gamma-ray bursts. Results to date are summarized.

Social inequalities in obesity and overweight in 11 OECD countries.

PubMed

Devaux, Marion; Sassi, Franco

2013-06-01

Evidence of inequalities in obesity and overweight is available mostly from national studies. This article provides a broad international comparison of inequalities by education level and socio-economic status, in men and women and over time. Data from national health surveys of 11 OECD countries were used. The size of inequalities was assessed on the basis of absolute and relative inequality indexes. A regression-analysis approach was used to assess differences between social groups in trends over time. Of the countries examined, USA and England had the highest rates of obesity and overweight. Large social inequalities were consistently detected in all countries, especially in women. Absolute inequalities were largest in Hungary and Spain with a difference of 11.6 and 10% in obesity rates in men, and 18.3 and 18.9% in women, respectively, across the education spectrum. Relative inequalities were largest in France and Sweden with poorly educated men 3.2 and 2.8 times as likely to be obese as men with the highest education (18 and 17 times for women in Spain and Korea, respectively). Pro-poor inequalities in overweight were observed for men in USA, Canada, Korea, Hungary, Australia and England. Inequalities remained virtually stable during the last 15 years, with only small variations in England, Korea, Italy and France. Large and persistent social inequalities in obesity and overweight by education level and socio-economic status exist in OECD countries. These are consistently larger in women than in men.

How Technology Changes Demands for Human Skills. OECD Education Working Papers, No. 45

ERIC Educational Resources Information Center

Levy, Frank

2010-01-01

This paper places the competencies to be measured by the OECD's Programme for the International Assessment of Adult Competencies (PIAAC) in the context of the technological developments which are reshaping the nature of the workplace and work in the 21st century. The largest technological force currently shaping work is the computer. Computers are…

Public Health Adaptation to Climate Change in OECD Countries

PubMed Central

Austin, Stephanie E.; Biesbroek, Robbert; Berrang-Ford, Lea; Ford, James D.; Parker, Stephen; Fleury, Manon D.

2016-01-01

Climate change is a major challenge facing public health. National governments play a key role in public health adaptation to climate change, but there are competing views on what responsibilities and obligations this will—or should—include in different nations. This study aims to: (1) examine how national-level public health adaptation is occurring in Organization for Economic Cooperation and Development (OECD) countries; (2) examine the roles national governments are taking in public health adaptation; and (3) critically appraise three key governance dimensions of national-level health adaptation—cross-sectoral collaboration, vertical coordination and national health adaptation planning—and identify practical examples suited to different contexts. We systematically reviewed publicly available public health adaptation to climate change documents and webpages by national governments in ten OECD countries using systematic web searches, assessment of self-reporting, and content analysis. Our findings suggest national governments are primarily addressing infectious disease and heat-related risks posed by climate change, typically emphasizing capacity building or information-based groundwork initiatives. We find national governments are taking a variety of approaches to public health adaptation to climate change that do not follow expected convergence and divergence by governance structure. We discuss practical options for incorporating cross-sectoral collaboration, vertical coordination and national health adaptation planning into a variety of contexts and identify leaders national governments can look to to inform their public health adaptation planning. Following the adoption of the Paris Agreement and subsequent increased momentum for adaptation, research tracking adaptation is needed to define what health adaptation looks like in practice, reveal insights that can be taken up across states and sectors, and ensure policy orientated learning. PMID:27618074

Public Health Adaptation to Climate Change in OECD Countries.

PubMed

Austin, Stephanie E; Biesbroek, Robbert; Berrang-Ford, Lea; Ford, James D; Parker, Stephen; Fleury, Manon D

2016-09-07

Climate change is a major challenge facing public health. National governments play a key role in public health adaptation to climate change, but there are competing views on what responsibilities and obligations this will-or should-include in different nations. This study aims to: (1) examine how national-level public health adaptation is occurring in Organization for Economic Cooperation and Development (OECD) countries; (2) examine the roles national governments are taking in public health adaptation; and (3) critically appraise three key governance dimensions of national-level health adaptation-cross-sectoral collaboration, vertical coordination and national health adaptation planning-and identify practical examples suited to different contexts. We systematically reviewed publicly available public health adaptation to climate change documents and webpages by national governments in ten OECD countries using systematic web searches, assessment of self-reporting, and content analysis. Our findings suggest national governments are primarily addressing infectious disease and heat-related risks posed by climate change, typically emphasizing capacity building or information-based groundwork initiatives. We find national governments are taking a variety of approaches to public health adaptation to climate change that do not follow expected convergence and divergence by governance structure. We discuss practical options for incorporating cross-sectoral collaboration, vertical coordination and national health adaptation planning into a variety of contexts and identify leaders national governments can look to to inform their public health adaptation planning. Following the adoption of the Paris Agreement and subsequent increased momentum for adaptation, research tracking adaptation is needed to define what health adaptation looks like in practice, reveal insights that can be taken up across states and sectors, and ensure policy orientated learning.

New Approaches in International Guidelines for Genetic Toxicology Assays: Latest Updates on OECD Guidelines

EPA Science Inventory

In March 2010, the 22nd meeting of the Working Group of National Coordinators of the OECD Test Guidelines Programme (WNT) approved a project for updating the Test Guidelines on genotoxicity, with Canada, the Netherlands, France and the USA identified as lead countries for this wo...

Coloniality and a Global Testing Regime in Higher Education: Unpacking the OECD's AHELO Initiative

ERIC Educational Resources Information Center

Shahjahan, Riyad A.

2013-01-01

The Organization for Economic Cooperation and Development (OECD) is currently engaging in a worldwide feasibility study entitled International Assessment of Higher Education Learning Outcomes (AHELO). This feasibility study seeks to develop measures that would assess student learning outcomes that would be valid across different languages,…

Superconducting Effects in Optimization of Magnetic Penetration Thermometers for X-ray Microcalorimeters

NASA Technical Reports Server (NTRS)

Stevenson, Thomas R.; Balvin, M. A.; Denis, K. L.; Hsieh, W.-T.; Sadleir, J. E.; Bandler, Simon E.; Busch, Sarah E.; Merrell, W.; Kelly, Daniel P.; Nagler, Peter C.;

New prompt fission gamma-ray spectral data from 239Pu(nth, f) in response to a high priority request from OECD Nuclear Energy Agency

NASA Astrophysics Data System (ADS)

Gatera, Angélique; Belgya, Tamás; Geerts, Wouter; Göök, Alf; Hambsch, Franz-Josef; Lebois, Matthieu; Maróti, Boglárka; Oberstedt, Stephan; Oberstedt, Andreas; Postelt, Frederik; Qi, Liqiang; Szentmiklósi, Laszló; Vidali, Marzio; Zeiser, Fabio

2017-09-01

Benchmark reactor calculations have revealed an underestimation of γ-heat following fission of up to 28%. To improve the modelling of new nuclear reactors, the OECD/NEA initiated a nuclear data High Priority Request List (HPRL) entry for the major isotopes (235U, 239Pu). In response to that HPRL entry, we executed a dedicated measurement program on prompt fission γ-rays employing state-of-the-art lanthanum bromide (LaBr3) detectors with superior timing and good energy resolution. Our new results from 252Cf(sf), 235U(nth,f) and 241Pu(nth,f) provide prompt fission γ-ray spectra characteristics : average number of photons per fission, average total energy per fission and mean photon energy; all within 2% of uncertainty. We present preliminary results on 239Pu(nth,f), recently measured at the Budapest Neutron Centre and supported by the CHANDA Trans-national Access Activity, as well as discussing our different published results in comparison to the historical data and what it says about the discrepancy observed in the benchmark calculations.

Measuring the Impacts of ICT Using Official Statistics. OECD Digital Economy Papers, No. 136

ERIC Educational Resources Information Center

Roberts, Sheridan

2008-01-01

This paper describes the findings of an OECD project examining ICT impact measurement and analyses based on official statistics. Both economic and social impacts are covered and some results are presented. It attempts to place ICT impacts measurement into an Information Society conceptual framework, provides some suggestions for standardising…

High-resolution, large dynamic range fiber-optic thermometer with cascaded Fabry-Perot cavities.

PubMed

Liu, Guigen; Sheng, Qiwen; Hou, Weilin; Han, Ming

2016-11-01

The paradox between a large dynamic range and a high resolution commonly exists in nearly all kinds of sensors. Here, we propose a fiber-optic thermometer based on dual Fabry-Perot interferometers (FPIs) made from the same material (silicon), but with different cavity lengths, which enables unambiguous recognition of the dense fringes associated with the thick FPI over the free-spectral range determined by the thin FPI. Therefore, the sensor combines the large dynamic range of the thin FPI and the high resolution of the thick FPI. To verify this new concept, a sensor with one 200 μm thick silicon FPI cascaded by another 10 μm thick silicon FPI was fabricated. A temperature range of -50°C to 130°C and a resolution of 6.8×10^-3°C were demonstrated using a simple average wavelength tracking demodulation. Compared to a sensor with only the thick silicon FPI, the dynamic range of the hybrid sensor was more than 10 times larger. Compared to a sensor with only the thin silicon FPI, the resolution of the hybrid sensor was more than 18 times higher.

Mobility of coated and uncoated TiO2 nanomaterials in soil columns--Applicability of the tests methods of OECD TG 312 and 106 for nanomaterials.

PubMed

Nickel, Carmen; Gabsch, Stephan; Hellack, Bryan; Nogowski, Andre; Babick, Frank; Stintz, Michael; Kuhlbusch, Thomas A J

2015-07-01

Nanomaterials are commonly used in everyday life products and during their life cycle they can be released into the environment. Soils and sediments are estimated as significant sinks for those nanomaterials. To investigate and assess the behaviour of nanomaterials in soils and sediments standardized test methods are needed. In this study the applicability of two existing international standardized test guidelines for the testing of nanomaterials, OECD TG 106 "Adsorption/Desorption using a Bath Equilibrium Method" and the OECD TG 312 "Leaching in Soil Columns", were investigated. For the study one coated and two uncoated TiO2 nanomaterials were used, respectively. The results indicate that the OECD TG 106 is not applicable for nanomaterials. However, the test method according to OECD TG 312 was found to be applicable if nano-specific adaptations are applied. The mobility investigations of the OECD TG 312 indicated a material-dependent mobility of the nanomaterials, which in some cases may lead to an accumulation in the upper soil layers. Whereas no significant transport was observed for the uncoated materials for the double-coated material (coating with dimethicone and aluminiumoxide) a significant transport was detected and attributed to the coating. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Challenge to Improve High-Temperature Platinum Resistance Thermometer

NASA Astrophysics Data System (ADS)

Tanaka, Y.; Widiatmo, J. V.; Harada, K.; Kobayashi, T.; Yamazawa, K.

2017-05-01

High-temperature standard platinum resistance thermometers (HTSPRTs) are used to interpolate the international temperature scale of 1990 (ITS-90), especially for temperatures between the aluminum and the silver points. For this, long-term stability of the HTSPRT is essential. CHINO R800-3L type SPRT, which has a nominal resistance at the triple point of water (TPW) around 0.25 Ω , is the one developed earlier for the interpolation of the ITS-90 at this temperature range. Further development to this previous model has been carried out for the purpose of improving the thermal stability. The improvement was focused on reducing the effect coming from the difference in thermal expansion between platinum wire and the quartz frame on which the platinum wire is installed. New HTSPRTs were made by CHINO Corporation. Some series of tests were carried out at CHINO and at NMIJ. Initial tests after the HTSPRT fabrication were done at CHINO, where thermal cycles between 500°C and 980°C were applied to the HTSPRTs to see change in the resistances at the TPW (R_{TPW}) and at the gallium point (R_{Ga}). Repeated resistance measurements at the silver point (R_{Ag}) were performed after completing the thermal cycling test. Before and after every measurement at silver point, R_{TPW} was measured, while before and after every two silver point realization R_{Ga} were measured. After completing this test, the HTSPRTs were transported to NMIJ, where the same repeated measurements at the silver point were done at NMIJ. These were then repeated at CHINO and at NMIJ upon repeated transportation among the institutes, to evaluate some effect due to transportation. This paper reports the details of the above-mentioned tests, the results and the analysis.

IRTAD Special Report : the availability of seat belt wearing data in OECD member countries, 1995

DOT National Transportation Integrated Search

1997-03-01

This reports surveys the availability of seat belt wearing data in OECD Member countries. The injury-reducing effect of seat belts is estimated to be around 50 per cent for fatal and serious injuries. Seat belts are most effective in frontal and roll...

Skills Development for the Knowledge Economy in Asia: Some Conclusions from the OECD Experience

ERIC Educational Resources Information Center

Martinez-Fernandez, Cristina; Weyman, Tamara

2014-01-01

The development of a knowledge-based economy relies greatly on developing the skills and education needed for inclusive and sustainable development so that growth will reach all parts of the society. Addressing skills development for all is challenging for all OECD countries; Asian economies are working towards developing integrated pathways of…

Innovative Research-Based Approaches to Learning and Teaching. OECD Education Working Papers, No. 79

ERIC Educational Resources Information Center

van den Broek, Gesa Sonja Elsa

2012-01-01

Building on an earlier 2008 summary prepared for OECD by Marlene Scardamalia and Carl Bereiter, this paper by Gesa S. E. van den Broek provides a more extensive discussion of approaches described as "research based innovation." "Fostering Communities of Learning" is a constructivist approach in which teachers help students discover important…

Improving Education Outcomes in the Slovak Republic. OECD Economics Department Working Papers, No. 578

ERIC Educational Resources Information Center

Carey, David

2007-01-01

Improving education outcomes is vital for achieving convergence with GDP per capita levels in Western European countries and for reducing income inequality. While some education outcomes are favourable, such as the low secondary-school drop-out rate, others have room for improvement: education achievement is below the OECD average and strongly…

An Exploration of Differences in Mathematics Attainment among Immigrant Pupils in 18 OECD Countries

ERIC Educational Resources Information Center

Shapira, Marina

2012-01-01

This article presents findings from a comparative study of sources of educational disadvantage of immigrant children across 18 OECD countries, which is based the data from the 2006 Programme for International Student Assessment (PISA). The findings show that disadvantaged family background and lack of host-country-specific cultural capital account…

Educational Equity in Spain and Norway: A Comparative Analysis of Two OECD Country Notes

ERIC Educational Resources Information Center

Haugen, Cecilie Ronning

2011-01-01

This article undertakes a comparative study of the Organization for Economic Co-operation and Development's (OECD) thematic reviews on "equity in education" for Spain and Norway. The author investigates whether there may be a similar orientation to equity expressed in the two reviews and discusses how social stratification may occur…

Meeting Materials for OECD Expert Meeting on Categorization of Manufactured Nanomaterials on September 17-19, 2014

EPA Pesticide Factsheets

Here are materials for the OECD Working Party on Nanomanufactured Materials Expert Meeting on Categorization of Nanomaterials (developing nanomaterial categories) took place on September 17-19, 2014 in Washington, D.C hosted by U.S. EPA.

Machines that Go 'Ping': Medical Technology and Health Expenditures in OECD Countries.

PubMed

Willemé, Peter; Dumont, Michel

2015-08-01

Technology is believed to be a major determinant of increasing health spending. The main difficulty to quantify its effect is to find suitable proxies to measure medical technological innovation. This paper's main contribution is the use of data on approved medical devices and drugs to proxy for medical technology. The effects of these variables on total real per capita health spending are estimated using a panel model for 18 Organisation for Economic Co-operation and Development (OECD) countries covering the period 1981-2012. The results confirm the substantial cost-increasing effect of medical technology, which accounts for almost 50% of the explained historical growth of spending. Despite the overall net positive effect of technology, the effect of two subgroups of approvals on expenditure is significantly negative. These subgroups can be thought of as representing 'incremental medical innovation', whereas the positive effects are related to radically innovative pharmaceutical products and devices. A separate time series model was estimated for the USA because the FDA approval data in fact only apply to the USA, while they serve as proxies for the other OECD countries. Our empirical model includes an indicator of obesity, and estimations confirm the substantial contribution of this lifestyle variable to health spending growth in the countries studied. Copyright © 2014 John Wiley & Sons, Ltd.

Determinants of branded prescription medicine prices in OECD countries.

PubMed

Kanavos, Panos G; Vandoros, Sotiris

2011-07-01

This paper investigates the determinants of the prices of branded prescription medicines across different regulatory settings and health care systems, taking into account their launch date, patent status, market dynamics and the regulatory context in which they diffuse. By using volume-weighted price indices, this paper analyzes price levels for a basket of prescription medicines and their differences in 15 OECD countries, including the United States and key European countries, the impact of distribution margins and generic entry on public prices and to what extent innovation, by means of introducing newer classes of medicines, contributes to price formation across countries. In doing so, the paper seeks to understand the factors that contribute to the existing differences in prices across countries, whether at an ex-factory or a retail level. The evidence shows that retail prices for branded prescription medicines in the United States are higher than those in key European and other OECD countries, but not as high as widely thought. Large differences in prices are mainly observed at an ex-factory level, but these are not the prices that consumers and payers pay. Cross-country differences in retail prices are actually not as high as expected and, when controlling for exchange rates, these differences can be even smaller. Product age has a significant effect on prices in all settings after having controlled for other factors. Price convergence is observed across countries for newer prescription medicines compared with older medicines. There is no evidence that originator brand prices fall after generic entry in the United States, a phenomenon known as the 'generics paradox'. Finally, distribution and taxes are important determinants of retail prices in several of the study countries. To the extent that remuneration of the distribution chain and taxation are directly and proportionately linked to product prices this is likely to persist over time.

Gamma-sky.net: Portal to the gamma-ray sky

NASA Astrophysics Data System (ADS)

Voruganti, Arjun; Deil, Christoph; Donath, Axel; King, Johannes

2017-01-01

http://gamma-sky.net is a novel interactive website designed for exploring the gamma-ray sky. The Map View portion of the site is powered by the Aladin Lite sky atlas, providing a scalable survey image tesselated onto a three-dimensional sphere. The map allows for interactive pan and zoom navigation as well as search queries by sky position or object name. The default image overlay shows the gamma-ray sky observed by the Fermi-LAT gamma-ray space telescope. Other survey images (e.g. Planck microwave images in low/high frequency bands, ROSAT X-ray image) are available for comparison with the gamma-ray data. Sources from major gamma-ray source catalogs of interest (Fermi-LAT 2FHL, 3FGL and a TeV source catalog) are overlaid over the sky map as markers. Clicking on a given source shows basic information in a popup, and detailed pages for every source are available via the Catalog View component of the website, including information such as source classification, spectrum and light-curve plots, and literature references. We intend for gamma-sky.net to be applicable for both professional astronomers as well as the general public. The website started in early June 2016 and is being developed as an open-source, open data project on GitHub (https://github.com/gammapy/gamma-sky). We plan to extend it to display more gamma-ray and multi-wavelength data. Feedback and contributions are very welcome!

Adult Literacy in OECD Countries: Technical Report on the First International Adult Literacy Survey.

ERIC Educational Resources Information Center

Murray, T. Scott; Kirsch, Irwin S.; Jenkins, Lynn B.

In December 1995, the Organisation for Economic Co-Operation and Development (OECD) and Statistics Canada jointly published the results of the first International Adult Literacy Survey (IALS). For this survey, representative samples of adults aged 16 to 65 were interviewed and tested in their homes in Canada, France, Germany, the Netherlands,…

The Funding of School Education: Connecting Resources and Learning. OECD Reviews of School Resources

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

This report on the funding of school education constitutes the first in a series of thematic comparative reports bringing together findings from the OECD School Resources Review. School systems have limited financial resources with which to pursue their objectives and the design of school funding policies plays a key role in ensuring that…

[The impact of the economic crisis on health systems of OECD countries].

PubMed

Paris, Valérie

2014-10-01

This paper describes measures adopted by OECD countries in the health sector in response to the economic crisis which began in 2008: increase and diversification of revenues collected for health, increases in user charges, reductions in staff, salaries and prices of health goods and services; and policies aiming to increase health systems efficiency. It then reviews the impact of these policies on health spending trends. © 2014 médecine/sciences – Inserm.

Selecting indicators for patient safety at the health system level in OECD countries.

PubMed

McLoughlin, Vivienne; Millar, John; Mattke, Soeren; Franca, Margarida; Jonsson, Pia Maria; Somekh, David; Bates, David

2006-09-01

Concerns about patient safety have arisen with growing documentation of the extent and nature of harm. Yet there are no robust and meaningful data that can be used internationally to assess the extent of the problem and considerable methodological difficulties. This article describes a project undertaken as part of the Organization for Economic Cooperation and Development (OECD) Quality Indicator Project, which aimed at developing an initial set of patient safety indicators. Patient safety indicators from OECD countries were identified and then rated against three principal criteria: importance to patient safety, scientific soundness, and potential feasibility. Although some countries are developing multi-source monitoring systems, these are not yet mature enough for international exchange. This project reviewed routine data collections as a starting point. Of an initial set of 59 candidate indicators identified, 21 were selected which cover known areas of harm to patients. This project is an important initial step towards defining a usable set of patient safety indicators that will allow comparisons to be made internationally and will support mutual learning and quality improvement in health care. Measures of harm should be complemented over time with measures of effective improvement factors.

GBD-2010 overestimates deaths from road injuries in OECD countries: new methods perform poorly.

PubMed

Bhalla, Kavi; Harrison, James E

2015-10-01

We assessed the quality of Global Burden of Disease-2010 (GBD-2010) estimates of road injury deaths by comparing with government statistics for Organisation for Economic Co-operation and Development (OECD) countries that report to the International Road Traffic Accident Database (IRTAD). We obtained tabulated data for 25 OECD countries that report to IRTAD and also report vital registration (VR) data to WHO. We collated VR deaths corresponding to the GBD-2010 road injury definition and estimated 'traffic', 'non-traffic' and 'unspecified whether traffic or non-traffic' components. We estimated national road injury deaths by redistributing partially specified causes of death, as was done by GBD until this was replaced by more complex methods in GBD-2010. GBD-2010 estimates of road injury deaths exceeded IRTAD by 45% overall. IRTAD values fell below the GBD-2010 95% uncertainty interval in all but three countries. Mismatch of conceptual scope accounted for about 8% of this discrepancy, 5% was because GBD-2010 included cases other than road traffic and 3% because GBD-2010 (unlike IRTAD) includes deaths >30 days after injury. Pro rata distribution of partially specified causes in VR data gave estimates that were 18% higher than IRTAD but closer than GBD-2010 estimates for all but two countries. Cases in VR data specified as road injury gave estimates closer to IRTAD. GBD-2010 road injury mortality estimates are substantially higher than the road death toll in OECD countries. The discrepancy is not explained by wider scope of the GBD road injury construct nor by undercounting by IRTAD. GBD-2010 likely attributed substantially more deaths with partially specified causes to road injuries than is appropriate. © The Author 2015; all rights reserved. Published by Oxford University Press on behalf of the International Epidemiological Association.

Fiscal rules, powerful levers for controlling the health budget? Evidence from 32 OECD countries.

PubMed

Schakel, Herman Christiaan; Wu, Erilia Hao; Jeurissen, Patrick

2018-03-01

Publicly funded healthcare forms an intricate part of government spending in most Organisation for Economic Co-operation and Development (OECD) countries, because of its reliance on entitlements and dedicated revenue streams. The impact of budgetary rules and procedures on publicly funded health care might thus be different from other spending categories. In this study we focus on the potential of fiscal rules to contain these costs and their design features. We assess the relationship between fiscal rules and the level of public health care expenditure of 32 (OECD) countries between 1985 and 2014. Our dataset consists of health care expenditure data of the OECD and data on fiscal rules of the International Monetary Fund (IMF) for that same period. Through a multivariate regression analysis, we estimate the association between fiscal rules and its subcategories and inflation adjusted public health care expenditure. We control for population, Gross Domestic Product (GDP), debt and whether countries received an IMF bailout for the specific period. In all our regressions we include country and year fixed effects. The presence of a fiscal rule on average is associated with a 3 % reduction of public health care expenditure. Supranational balanced budget rules are associated with some 8 % lower expenditure. Health service provision-oriented countries with more passive purchasing structures seem less capable of containing costs through fiscal rules. Fiscal rules demonstrate lagged effectiveness; the potential for expenditure reduction increases after one and two years of fiscal rule implementation. Finally, we find evidence that fiscal frameworks that incorporate multi-year expenditure ceilings show additional potential for cost control. Our study shows that there seems a clear relationship between the potential of fiscal rules and budgeting health expenses. Using fiscal rules to contain the level of health care expenditure can thus be a necessary precondition for

Resonance production in. gamma gamma. collisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renard, F.M.

1983-04-01

The processes ..gamma gamma.. ..-->.. hadrons can be depicted as follows. One photon creates a q anti q pair which starts to evolve; the other photon can either (A) make its own q anti q pair and the (q anti q q anti q) system continue to evolve or (B) interact with the quarks of the first pair and lead to a modified (q anti q) system in interaction with C = +1 quantum numbers. A review of the recent theoretical activity concerning resonance production and related problems is given under the following headings: hadronic C = +1 spectroscopy (qmore » anti q, qq anti q anti q, q anti q g, gg, ggg bound states and mixing effects); exclusive ..gamma gamma.. processes (generalities, unitarized Born method, VDM and QCD); total cross section (soft and hard contributions); q/sup 2/ dependence of soft processes (soft/hard separation, 1/sup +- +/ resonances); and polarization effects. (WHK)« less

Summary of the June 2009 Educationtoday Crisis Survey: Initial Reflections on the Impact of the Economic Crisis on Education. OECD Education Working Papers, No. 43

ERIC Educational Resources Information Center

Karkkainen, Kiira

2010-01-01

This paper provides initial reflections on the impact of the economic crisis on education across the Organisation for Economic Cooperation and Development (OECD) area by analysing the OECD educationtoday crisis survey responses of June 2009. It first looks at the impact of the crisis on education demand and participation, after which the focus…

Development and experimental qualification of a calculation scheme for the evaluation of gamma heating in experimental reactors. Application to MARIA and Jules Horowitz (JHR) MTR Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarchalski, M.; Pytel, K.; Wroblewska, M.

2015-07-01

Precise computational determination of nuclear heating which consists predominantly of gamma heating (more than 80 %) is one of the challenges in material testing reactor exploitation. Due to sophisticated construction and conditions of experimental programs planned in JHR it became essential to use most accurate and precise gamma heating model. Before the JHR starts to operate, gamma heating evaluation methods need to be developed and qualified in other experimental reactor facilities. This is done inter alia using OSIRIS, MINERVE or EOLE research reactors in France. Furthermore, MARIA - Polish material testing reactor - has been chosen to contribute to themore » qualification of gamma heating calculation schemes/tools. This reactor has some characteristics close to those of JHR (beryllium usage, fuel element geometry). To evaluate gamma heating in JHR and MARIA reactors, both simulation tools and experimental program have been developed and performed. For gamma heating simulation, new calculation scheme and gamma heating model of MARIA have been carried out using TRIPOLI4 and APOLLO2 codes. Calculation outcome has been verified by comparison to experimental measurements in MARIA reactor. To have more precise calculation results, model of MARIA in TRIPOLI4 has been made using the whole geometry of the core. This has been done for the first time in the history of MARIA reactor and was complex due to cut cone shape of all its elements. Material composition of burnt fuel elements has been implemented from APOLLO2 calculations. An experiment for nuclear heating measurements and calculation verification has been done in September 2014. This involved neutron, photon and nuclear heating measurements at selected locations in MARIA reactor using in particular Rh SPND, Ag SPND, Ionization Chamber (all three from CEA), KAROLINA calorimeter (NCBJ) and Gamma Thermometer (CEA/SCK CEN). Measurements were done in forty points using four channels. Maximal nuclear heating

More Health Expenditure, Better Economic Performance? Empirical Evidence From OECD Countries.

PubMed

Wang, Fuhmei

2015-01-01

Recent economic downturns have led many countries to reduce health spending dramatically, with the World Health Organization raising concerns over the effects of this, in particular among the poor and vulnerable. With the provision of appropriate health care, the population of a country could have better health, thus strengthening the nation's human capital, which could contribute to economic growth through improved productivity. How much should countries spend on health care? This study aims to estimate the optimal health care expenditure in a growing economy. Applying the experiences of countries from the Organization for Economic Co-Operation and Development (OECD) over the period 1990 to 2009, this research introduces the method of system generalized method of moments (GMM) to derive the design of the estimators of the focal variables. Empirical evidence indicates that when the ratio of health spending to gross domestic product (GDP) is less than the optimal level of 7.55%, increases in health spending effectively lead to better economic performance. Above this, more spending does not equate to better care. The real level of health spending in OECD countries is 5.48% of GDP, with a 1.87% economic growth rate. The question which is posed by this study is a pertinent one, especially in the current context of financially constrained health systems around the world. The analytical results of this work will allow policymakers to better allocate scarce resources to achieve their macroeconomic goals. © The Author(s) 2015.

More Health Expenditure, Better Economic Performance? Empirical Evidence From OECD Countries

PubMed Central

Wang, Fuhmei

2015-01-01

Recent economic downturns have led many countries to reduce health spending dramatically, with the World Health Organization raising concerns over the effects of this, in particular among the poor and vulnerable. With the provision of appropriate health care, the population of a country could have better health, thus strengthening the nation’s human capital, which could contribute to economic growth through improved productivity. How much should countries spend on health care? This study aims to estimate the optimal health care expenditure in a growing economy. Applying the experiences of countries from the Organization for Economic Co-Operation and Development (OECD) over the period 1990 to 2009, this research introduces the method of system generalized method of moments (GMM) to derive the design of the estimators of the focal variables. Empirical evidence indicates that when the ratio of health spending to gross domestic product (GDP) is less than the optimal level of 7.55%, increases in health spending effectively lead to better economic performance. Above this, more spending does not equate to better care. The real level of health spending in OECD countries is 5.48% of GDP, with a 1.87% economic growth rate. The question which is posed by this study is a pertinent one, especially in the current context of financially constrained health systems around the world. The analytical results of this work will allow policymakers to better allocate scarce resources to achieve their macroeconomic goals. PMID:26310501

“A question of balance”: addressing the public health impacts of multinational enterprises in the OECD Guidelines for Multinational Enterprises

PubMed Central

Yang, Joshua S.; McDaniel, Patricia A.; Malone, Ruth E.

2012-01-01

Background The global community is beginning to address non-communicable diseases, but how to increase the accountability of multinational enterprises (MNEs) for the health impacts of their products and practices remains unclear. We examine the Organization for Economic Cooperation and Development’s (OECD) efforts to do so through voluntary MNE guidelines. Methods We developed a historical case study of how the OECD Guidelines for Multinational Enterprises were developed and revised from 1973–2000 through an analysis of publicly available archived OECD and tobacco industry documents. Results The first edition of the Guidelines was a purely economic instrument. Outside pressures and a desire to ward off more stringent regulatory efforts resulted in the addition over time of guidelines related to the environment, consumer interests, sustainable development, and human rights. Conclusion Despite their voluntary nature, the Guidelines can play a role in efforts to help balance the interests of MNEs and public health by providing a starting point for efforts to create binding provisions addressing MNEs’ contributions to disease burden or disease reduction. PMID:23046298

Design of High Resolution Soft X-Ray Microcalorimeters Using Magnetic Penetration Thermometers

NASA Technical Reports Server (NTRS)

Busch. Sarah; Balvin, Manuel; Bandler, Simon; Denis, Kevin; Finkbeiner, Fred; Porst, Jan-Patrick; Sadlier, Jack; Smith, Stephen; Stevenson, Thomas

2012-01-01

We have designed high-resolution soft x-ray microcalorimeters using magnetic penetration thermometers (MPTs) in an array of pixels covering a total of 2 square centimeters to have a resolving power of 300 at energies around 300 eV. This performance is desirable for studying the soft x-ray background from the warm hot intergalactic medium. MPT devices have small sensor heat capacity and high responsivities, which makes them excellent detector technology for attempting to attain sub-eV resolution. We are investigating the feasibility of pixels with absorbers that are 625 x 625 square micrometers, up to 1 x 1 square millimeters in area and 0.35 micrometer thick and thinner. Our tests have shown that suspended gold absorbers 0.35 micrometers thick (RRR = 6.7) are feasible to fabricate. We modeled the thermal diffusion from such thin gold over the size of a 625 x 625 square micrometer absorber, and conclude that the effect of the thermalization on the resolution of a 300 eV photon is an additional approximately 0.2 eV FWHM of broadening. We discuss the thermal effects of small absorber attachment sterns on solid substrate, as well as considerations for multiplexed readout. We will present the progress we have made towards building and testing this soft x-ray detector.

OECD validation of the rodent Hershberger assay using three reference chemicals; 17alpha-methyltestosterone, procymidone, and p,p'-DDE.

PubMed

Shin, Jae-Ho; Moon, Hyun Ju; Kang, Il Hyun; Kim, Tae Sung; Lee, Su Jung; Ahn, Ji Youn; Bae, Hoon; Jeung, Eui Bae; Han, Soon Young

2007-05-01

The rodent Hershberger assay is being validated as an in vivo test method for detecting androgenic or antiandrogenic compounds by the Organization for Economic Cooperation and Development (OECD). As part of the international validation work, we studied 17alpha-methyltestosterone for evaluating androgenic activity, and procymidone and p,p'-DDE for evaluating antiandrogenic activity. Male Sprague-Dawley rats were castrated at postnatal day 42, and only the rats that showed preputial separation were used in this study. Seven days after castration, chemicals were administered daily by gavages to groups of rats for 10 days, as recommended by OECD phase-2 protocol. Administration of 17alpha-methyltestosterone induced increases of weights of accessory sex tissues and glands in a dose-dependent manner. Administration of procymidone and p,p'-DDE produced a dose-dependent decrease of weights of accessory sex tissues and glands in the rats co-treated with testosterone propionate (0.4 mg/kg/day) subcutaneously. Our data strongly suggested that the current protocol of OECD Hershberger assay (phase-2) should be used as a reliable method for the detection of endocrine related toxicity of other chemicals.

An acoustic thermometer for air refractive index estimation in long distance interferometric measurements

NASA Astrophysics Data System (ADS)

Pisani, Marco; Astrua, Milena; Zucco, Massimo

2018-02-01

We present a method to measure the temperature along the path of an optical interferometer based on the propagation of acoustic waves. It exploits the high sensitivity of the speed of sound to air temperature. In particular, it takes advantage of a technique where the generation of acoustic waves is synchronous with the amplitude modulation of a laser source. A photodetector converts the laser light into an electronic signal used as a reference, while the incoming acoustic waves are focused on a microphone and generate the measuring signal. Under this condition, the phase difference between the two signals substantially depends on the temperature of the air volume interposed between the sources and the receivers. A comparison with traditional temperature sensors highlighted the limit of the latter in the case of fast temperature variations and the advantage of a measurement integrated along the optical path instead of a sampling measurement. The capability of the acoustic method to compensate for the interferometric distance measurements due to air temperature variations has been demonstrated to the level of 0.1 °C corresponding to 10-7 on the refractive index of air. We applied the method indoor for distances up to 27 m, outdoor at 78 m and finally tested the acoustic thermometer over a distance of 182 m.

Magnetic Nanoparticle Thermometer: An Investigation of Minimum Error Transmission Path and AC Bias Error

PubMed Central

Du, Zhongzhou; Su, Rijian; Liu, Wenzhong; Huang, Zhixing

2015-01-01

The signal transmission module of a magnetic nanoparticle thermometer (MNPT) was established in this study to analyze the error sources introduced during the signal flow in the hardware system. The underlying error sources that significantly affected the precision of the MNPT were determined through mathematical modeling and simulation. A transfer module path with the minimum error in the hardware system was then proposed through the analysis of the variations of the system error caused by the significant error sources when the signal flew through the signal transmission module. In addition, a system parameter, named the signal-to-AC bias ratio (i.e., the ratio between the signal and AC bias), was identified as a direct determinant of the precision of the measured temperature. The temperature error was below 0.1 K when the signal-to-AC bias ratio was higher than 80 dB, and other system errors were not considered. The temperature error was below 0.1 K in the experiments with a commercial magnetic fluid (Sample SOR-10, Ocean Nanotechnology, Springdale, AR, USA) when the hardware system of the MNPT was designed with the aforementioned method. PMID:25875188

The Position of Turkey among OECD Member and Candidate Countries According to PISA 2009 Results

ERIC Educational Resources Information Center

Acar, Tulin

2012-01-01

The aim of the study is to determine the status of Turkey among OECD (Organisation for Economic Co-operation and Development) members and candidate countries through cluster and discriminant analyses according to PISA (Programme for International Student Assessment) 2009 results. The study includes 475460 fifteen year-old students from 65…

SHORT COMMUNICATION: Correlation between the Resistance Ratios of Platinum Resistance Thermometers at the Melting Point of Gallium and the Triple Point of Mercury

NASA Astrophysics Data System (ADS)

Singh, Y. P.; Maas, H.; Edler, F.; Zaidi, Z. H.

1994-01-01

A set of resistance ratios (W) for platinum resistance thermometers was obtained at the triple point of Hg and the melting point of Ga in order to study their relationship. It was found that using measured values for one of the fixed points, a linear equation will predict the value of the other. These measurements also indicate that the fixed points of Hg and of Ga are inconsistent by about 1,5 mK in the sense that either the melting point of Ga or the triple point of Hg was assigned too high a value on the ITS-90.

Method of incident low-energy gamma-ray direction reconstruction in the GAMMA-400 gamma-ray space telescope

NASA Astrophysics Data System (ADS)

Kheymits, M. D.; Leonov, A. A.; Zverev, V. G.; Galper, A. M.; Arkhangelskaya, I. V.; Arkhangelskiy, A. I.; Suchkov, S. I.; Topchiev, N. P.; Yurkin, Yu T.; Bakaldin, A. V.; Dalkarov, O. D.

2016-02-01

The GAMMA-400 gamma-ray space-based telescope has as its main goals to measure cosmic γ-ray fluxes and the electron-positron cosmic-ray component produced, theoretically, in dark-matter-particles decay or annihilation processes, to search for discrete γ-ray sources and study them in detail, to examine the energy spectra of diffuse γ-rays — both galactic and extragalactic — and to study gamma-ray bursts (GRBs) and γ-rays from the active Sun. Scientific goals of GAMMA-400 telescope require fine angular resolution. The telescope is of a pair-production type. In the converter-tracker, the incident gamma-ray photon converts into electron-positron pair in the tungsten layer and then the tracks are detected by silicon- strip position-sensitive detectors. Multiple scattering processes become a significant obstacle in the incident-gamma direction reconstruction for energies below several gigaelectronvolts. The method of utilising this process to improve the resolution is proposed in the presented work.

Primary and Secondary Education in the United States. OECD Economics Department Working Papers, No. 585

ERIC Educational Resources Information Center

Tulip, Peter; Wurzburg, Gregory

2007-01-01

The average educational attainment of US students is weak by international comparison. For example, mean results of PISA test scores are below the OECD [Organisation for Economic Co-operation and Development] average. This is despite substantial resources devoted to the schooling system. One partial explanation for this is that academic standards,…

Rethinking Universal Service for a Next Generation Network Environment. OECD Digital Economy Papers, No. 113

ERIC Educational Resources Information Center

Xavier, Patrick

2006-01-01

There is a clear need, in view of significant competitive, technological and service changes taking place in the telecommunications sector, to review universal service obligations, their coverage, how they are financed and who is responsible for providing them. In many OECD countries, a primary longer term issue is how to provide universal service…

School Funding Formulas: Review of Main Characteristics and Impacts. OECD Education Working Papers, No. 74

ERIC Educational Resources Information Center

Fazekas, Mihaly

2012-01-01

This study provides a literature review on school funding formulas across OECD countries. It looks at three salient questions from a comparative perspective: i) What kind of school formula funding schemes exist and how are they used, particularly for promoting the needs of socially disadvantaged pupils?; ii) How do school formula funding regimes…

Design and Performance of the GAMMA-400 Gamma-Ray Telescope for Dark Matter Searches

NASA Technical Reports Server (NTRS)

Galper, A.M.; Adriani, O.; Aptekar, R. L.; Arkhangelskaja, I. V.; Arkhangelskiy, A.I.; Boezio, M.; Bonvicini, V.; Boyarchuk, K. A.; Fradkin, M. I.; Gusakov, Yu. V.;

Skilled Voices?: Reflections on Political Participation and Education in Austria. OECD Education Working Papers, No. 11

ERIC Educational Resources Information Center

Walter, Florian; Rosenberger, Sieglinde

2007-01-01

This study, part of OECD/CERI's project on Measuring the Social Outcomes of Learning, investigates the relationship between educational attainment and political participation in Austria. First, a model based on various theoretical considerations is introduced. This incorporates direct educational effects as well as indirect effects that occur…

The OECD PISA Study as a Soft Power in Education? Lessons from Switzerland and the US

ERIC Educational Resources Information Center

Bieber, Tonia; Martens, Kerstin

2011-01-01

Although originally created for economic purposes, the Organisation for Economic Co-Operation and Development (OECD) has increasingly gained weight in education policy in recent years and is now regarded as an international authority in the field, particularly through its "Programme for International Student Assessment" (PISA), which was…

Report to OECD/CERI Policy Group from Pacific Circle Consortium on Phase 1 Activities: 1977-1980.

ERIC Educational Resources Information Center

Connell, Helen; Wells, Marguerite

Established in 1977, the Pacific Circle Consortium is a group of national-level educational research and development agencies from the Organization for Economic Cooperation and Development (OECD) Pacific region countries engaged in cooperative projects intended to improve international understanding and relations. From 1977 to 1980 the Consortium…

The validity of the distress thermometer in prostate cancer populations.

PubMed

Chambers, Suzanne K; Zajdlewicz, Leah; Youlden, Danny R; Holland, Jimmie C; Dunn, Jeff

2014-02-01

The Distress Thermometer (DT) is widely recommended for screening for distress after cancer. However, the validity of the DT in men with prostate cancer and over differing time points from diagnosis has not been well examined. Receiver operating characteristics analyses were used to evaluate the diagnostic accuracy of the DT compared with three commonly used standardised scales in two prospective and one cross-sectional survey of men with prostate cancer (n = 740, 189 and 463, respectively). Comparison scales included the Impact of Event Scale - Revised (IES-R, Study 1), the Hospital Anxiety and Depression Scale (HADS, Study 2) and the Brief Symptom Inventory-18 (BSI-18, Study 3). Study 1: the DT showed good accuracy against the IES-R at all time points (area under curves (AUCs) ranging from 0.84 to 0.88) and sensitivity was high (>85%). Study 2: the DT performed well against both the anxiety and depression subscales for HADS at baseline (AUC = 0.84 and 0.82, respectively), but sensitivity decreased substantially after 12 months. Study 3: validity was high for the anxiety (AUC = 0.90, sensitivity = 90%) and depression (AUC = 0.85, sensitivity = 74%) subscales of the BSI-18 but was poorer for somatization (AUC = 0.67, sensitivity = 52%). A DT cut-off between ≥3 and ≥6 maximised sensitivity and specificity across analyses. The DT is a valid tool to detect cancer-specific distress, anxiety and depression among prostate cancer patients, particularly close to diagnosis. A cut-off of ≥4 may be optimal soon after diagnosis, and for longer-term assessments, ≥3 was supported. © 2013 The Authors. Psycho-Oncology published by John Wiley & Sons, Ltd. © 2013 The Authors. Psycho-Oncology published by John Wiley & Sons, Ltd.

OH 18 cm TRANSITION AS A THERMOMETER FOR MOLECULAR CLOUDS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebisawa, Yuji; Inokuma, Hiroshi; Yamamoto, Satoshi

We have observed the four hyperfine components of the 18 cm OH transition toward the translucent cloud eastward of Heiles Cloud 2 (HCL2E), the cold dark cloud L134N, and the photodissociation region of the ρ-Ophiuchi molecular cloud with the Effelsberg 100 m telescope. We have found intensity anomalies among the hyperfine components in all three regions. In particular, an absorption feature of the 1612 MHz satellite line against the cosmic microwave background has been detected toward HCL2E and two positions of the ρ-Ophiuchi molecular cloud. On the basis of statistical equilibrium calculations, we find that the hyperfine anomalies originate frommore » the non-LTE population of the hyperfine levels, and can be used to determine the kinetic temperature of the gas over a wide range of H{sub 2} densities (10{sup 2}–10{sup 7} cm{sup −3}). Toward the center of HCL2E, the gas kinetic temperature is determined to be 53 ± 1 K, and it increases toward the cloud peripheries (∼60 K). The ortho-to-para ratio of H{sub 2} is determined to be 3.5 ± 0.9 from the averaged spectrum for the eight positions. In L134N, a similar increase of the temperature is also seen toward the periphery. In the ρ-Ophiuchi molecular cloud, the gas kinetic temperature decreases as a function of the distance from the exciting star HD 147889. These results demonstrate a new aspect of the OH 18 cm line that can be used as a good thermometer of molecular cloud envelopes. The OH 18 cm line can be used to trace a new class of warm molecular gas surrounding a molecular cloud, which is not well traced by the emission of CO and its isotopologues.« less

Higher Education and Economic Development in the OECD: Policy Lessons for Other Countries and Regions

ERIC Educational Resources Information Center

Pinheiro, Rómulo; Pillay, Pundy

2016-01-01

This paper sheds light on the role of tertiary or higher education in economic development across two successful OECD case studies: Finland and South Korea. A number of key aspects are discussed, from the nature of the social contract between higher education and the economy to the endogenous characteristics of domestic higher education to the…

Does trade matter for carbon emissions in OECD countries? Evidence from a new trade openness measure.

PubMed

Gozgor, Giray

2017-12-01

This paper analyzes the impacts of the per capita income, the per capita energy consumption, and the trade openness on the level of per capita carbon emissions in the panel dataset of 35 Organization for Economic Cooperation and Development (OECD) countries over the period 1960-2013. Along with the nominal trade openness, the paper uses a different trade openness measure, so called as the "trade potential index" (TPI). To the best of our knowledge, this is the first paper that uses the TPI in the empirical environmental Kuznets curve (EKC) hypothesis literature. The paper finds that the EKC hypothesis is valid and there is an "inverted-U" relationship between the income and the carbon emissions. In addition, the paper observes that there is a positive effect of the energy consumption on the carbon emissions. Furthermore, the results indicate that both trade openness measures are negatively associated with the carbon emissions in the OECD countries in the long run.

Cosmic Gamma-Rays

Science.gov Websites

[Argonne Logo] [DOE Logo] Cosmic Gamma-Rays Home Publications Talks People Students Argonne > ; HEP > Cosmic Gamma-Rays Projects VERITAS Past Projects TrICE What's New CTA Cosmic Gamma-Rays The

Design and Performance of the GAMMA-400 Gamma-Ray Telescope for Dark Matter Searches

NASA Technical Reports Server (NTRS)

Galper, A. M.; Adriani, O.; Aptekar, R. L.; Arkhangelskaja, I. V.; Arkhangelskiy, A. I.; Boezio, M.; Bonvicini, V.; Boyarchuk, K. A.; Fradkin, M. I.; Gusakov, Yu V.;

The OECD as Pivot of the Emerging Global Educational Accountability Regime: How Accountable Are the Accountants?

ERIC Educational Resources Information Center

Meyer, Heinz-Dieter

2014-01-01

Background/Context: PISA has catapulted the OECD- an organization whose mission is the global growth of market economies-to a central role in international education policy making, rivaling and sometimes outdoing the various national governments in influence. While claiming scientific evidence as the basis for the accountability regime it…

INL Results for Phases I and III of the OECD/NEA MHTGR-350 Benchmark

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerhard Strydom; Javier Ortensi; Sonat Sen

2013-09-01

The Idaho National Laboratory (INL) Very High Temperature Reactor (VHTR) Technology Development Office (TDO) Methods Core Simulation group led the construction of the Organization for Economic Cooperation and Development (OECD) Modular High Temperature Reactor (MHTGR) 350 MW benchmark for comparing and evaluating prismatic VHTR analysis codes. The benchmark is sponsored by the OECD's Nuclear Energy Agency (NEA), and the project will yield a set of reference steady-state, transient, and lattice depletion problems that can be used by the Department of Energy (DOE), the Nuclear Regulatory Commission (NRC), and vendors to assess their code suits. The Methods group is responsible formore » defining the benchmark specifications, leading the data collection and comparison activities, and chairing the annual technical workshops. This report summarizes the latest INL results for Phase I (steady state) and Phase III (lattice depletion) of the benchmark. The INSTANT, Pronghorn and RattleSnake codes were used for the standalone core neutronics modeling of Exercise 1, and the results obtained from these codes are compared in Section 4. Exercise 2 of Phase I requires the standalone steady-state thermal fluids modeling of the MHTGR-350 design, and the results for the systems code RELAP5-3D are discussed in Section 5. The coupled neutronics and thermal fluids steady-state solution for Exercise 3 are reported in Section 6, utilizing the newly developed Parallel and Highly Innovative Simulation for INL Code System (PHISICS)/RELAP5-3D code suit. Finally, the lattice depletion models and results obtained for Phase III are compared in Section 7. The MHTGR-350 benchmark proved to be a challenging simulation set of problems to model accurately, and even with the simplifications introduced in the benchmark specification this activity is an important step in the code-to-code verification of modern prismatic VHTR codes. A final OECD/NEA comparison report will compare the Phase I and III

Higher Education R&D and Productivity Growth: An Empirical Study on High-Income OECD Countries

ERIC Educational Resources Information Center

Eid, Ashraf

2012-01-01

This paper is a macro study on higher education R&D and its impact on productivity growth. I measure the social rate of return on higher education R&D in 17 high-income OECD countries using country level data on the percentage of gross expenditure on R&D performed by higher education, business, and government sectors over the period…

Implications of Gamma-Ray Transparency Constraints in Blazars: Minimum Distances and Gamma-Ray Collimation

NASA Technical Reports Server (NTRS)

Becker, Peter A.; Kafatos, Menas

1995-01-01

We develop a general expression for the gamma - gamma absorption coefficient, alpha(sub gamma(gamma)) for gamma-rays propagating in an arbitrary direction at an arbitrary point in space above an X-ray-emitting accretion disk. The X-ray intensity is assumed to vary as a power law in energy and radius between the outer disk radius, R(sub 0), and the inner radius, R(sub ms) which is the radius of marginal stability for a Schwarzschild black hole. We use our result for alpha(sub gamma(gamma)) to calculate the gamma - gamma optical depth, tau(sub gamma(gamma)) for gamma - rays created at height z and propagating at angle Phi relative to the disk axis, and we show that for Phi = 0 and z greater than or approx equal to R(sub 0), tau(sub gamma(gamma)) proportional to Epsilon(sup alpha)z(sup -2(alpha) - 3), where alpha is the X-ray spectral index and Epsilon is the gamma - ray energy. As an application, we use our formalism to compute the minimum distance between the central black hole and the site of production of the gamma-rays detected by EGRET during the 1991 June flare of 3C 279. In order to obtain an upper limit, we assume that all of the X-rays observed contemporaneously by Ginga were emitted by the disk. Our results suggest that the observed gamma - rays may have originated within less than or approx equal to 45 GM/sq c from a black hole of mass greater than or approx equal to 10(exp 9) solar mass, perhaps in active plasma located above the central funnel of the accretion disk. This raises the possibility of establishing a direct connection between the production of the observed gamma - rays and the accretion of material onto the black hole. We also consider the variation of the optical depth as a function of the angle of propagation Phi. Our results indicate that the "focusing" of the gamma - rays along the disk axis due to pair production is strong enough to explain the observed degree of alignment in blazar sources. If the gamma - rays are produced isotropically

Design and performance of the GAMMA-400 gamma-ray telescope for dark matter searches

NASA Astrophysics Data System (ADS)

Galper, A. M.; Adriani, O.; Aptekar, R. L.; Arkhangelskaja, I. V.; Arkhangelskiy, A. I.; Boezio, M.; Bonvicini, V.; Boyarchuk, K. A.; Fradkin, M. I.; Gusakov, Yu. V.; Kaplin, V. A.; Kachanov, V. A.; Kheymits, M. D.; Leonov, A. A.; Longo, F.; Mazets, E. P.; Maestro, P.; Marrocchesi, P.; Mereminskiy, I. A.; Mikhailov, V. V.; Moiseev, A. A.; Mocchiutti, E.; Mori, N.; Moskalenko, I. V.; Naumov, P. Yu.; Papini, P.; Picozza, P.; Rodin, V. G.; Runtso, M. F.; Sparvoli, R.; Spillantini, P.; Suchkov, S. I.; Tavani, M.; Topchiev, N. P.; Vacchi, A.; Vannuccini, E.; Yurkin, Yu. T.; Zampa, N.; Zverev, V. G.; Zirakashvili, V. N.

2013-02-01

The GAMMA-400 gamma-ray telescope is designed to measure the fluxes of gamma-rays and cosmic-ray electrons + positrons, which can be produced by annihilation or decay of the dark matter particles, as well as to survey the celestial sphere in order to study point and extended sources of gamma-rays, measure energy spectra of Galactic and extragalactic diffuse gamma-ray emission, gamma-ray bursts, and gamma-ray emission from the Sun. GAMMA-400 covers the energy range from 100 MeV to 3000 GeV. Its angular resolution is ~0.01° (Eγ > 100 GeV), the energy resolution ~1% (Eγ > 10 GeV), and the proton rejection factor ~106. GAMMA-400 will be installed on the Russian space platform Navigator. The beginning of observations is planned for 2018.

Rebuilding Schools after the Wenchuan Earthquake: China Visits OECD, Italy and Turkey. CELE Exchange 2009/7

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2009

2009-01-01

As the reconstruction efforts continue in China in the wake of the Great Wenchuan earthquake in May 2008, the China Development Research Foundation, with the support of the Organisation for Economic Co-operation and Development (OECD) Centre for Effective Learning Environments, organised an International Training Programme on the Post-Earthquake…

Exploring the Complex Interaction between Governance and Knowledge in Education. OECD Education Working Papers, No. 67

ERIC Educational Resources Information Center

Fazekas, Mihaly; Burns, Tracey

2012-01-01

Governments in all Organisation for Economic Cooperation and Development (OECD) countries are facing the challenge of governing increasingly complex education systems. There is a growing need for governance structures that can handle this complexity and which can provide actors with the knowledge they need to make decisions. This working paper…

School Segregation and Its Effects on Educational Equality and Efficiency in 16 OECD Comprehensive School Systems

ERIC Educational Resources Information Center

Benito, Ricard; Alegre, Miquel Àngel; Gonzàlez-Balletbò, Isaac

2014-01-01

Using PISA data for 16 Western OECD countries having comprehensive school systems, we explore the conditions under which the socioeconomic composition of schools affects educational efficiency and equality, to a greater or lesser extent. First, a multilevel analysis is applied to examine and compare the effect of school socioeconomic composition…

A Literature Review of School Practices to Overcome School Failure. OECD Education Working Papers, No. 68

ERIC Educational Resources Information Center

Faubert, Brenton

2012-01-01

The purpose of this report is to review the body of literature concerned with reducing school failure by improving equity in schools and classrooms. The literature review will be used to inform the Organisation for Economic Cooperation and Development (OECD) Project "Overcoming School Failure: Policies that Work" and hopefully, future educational…

Education in States and Nations: Indicators Comparing U.S. States with the OECD Countries in 1988.

ERIC Educational Resources Information Center

Salganik, Laura Hersh; And Others

This report is based on the first international education indicators produced by the Organization for Economic Co-operation and Development (OECD). The 16 indicators were chosen to take advantage of data available in "Education at a Glance," the most up-to-date set of international educational indicators. Indicators are grouped into…

Design of a temperature measurement and feedback control system based on an improved magnetic nanoparticle thermometer

NASA Astrophysics Data System (ADS)

Du, Zhongzhou; Sun, Yi; Liu, Jie; Su, Rijian; Yang, Ming; Li, Nana; Gan, Yong; Ye, Na

2018-04-01

Magnetic fluid hyperthermia, as a novel cancer treatment, requires precise temperature control at 315 K-319 K (42 °C-46 °C). However, the traditional temperature measurement method cannot obtain the real-time temperature in vivo, resulting in a lack of temperature feedback during the heating process. In this study, the feasibility of temperature measurement and feedback control using magnetic nanoparticles is proposed and demonstrated. This technique could be applied in hyperthermia. Specifically, the triangular-wave temperature measurement method is improved by reconstructing the original magnetization response of magnetic nanoparticles based on a digital phase-sensitive detection algorithm. The standard deviation of the temperature in the magnetic nanoparticle thermometer is about 0.1256 K. In experiments, the temperature fluctuation of the temperature measurement and feedback control system using magnetic nanoparticles is less than 0.5 K at the expected temperature of 315 K. This shows the feasibility of the temperature measurement method for temperature control. The method provides a new solution for temperature measurement and feedback control in hyperthermia.

Persistence assessment of cyclohexyl- and norbornyl-derived ketones and their degradation products in different OECD screening tests.

PubMed

Seyfried, M; van Ginkel, C G; Boschung, A; Miffon, F; Fantini, P; Tissot, E; Baroux, L; Merle, P; Chaintreau, A

2015-07-01

The persistence of synthetic cyclohexyl- and norbornyl-derived ketones was assessed by using OECD 301F and 301D biodegradation tests. While cyclohexyl-derived ketones either reached or came close to the pass level (60%) after 60 d, the corresponding norbornyl derivatives yielded significantly less biodegradation (<40%). By analyzing extracts at 60 d, the key degradation products of four norbornyl derivatives were identified. Consistently, 2-bicyclo[2.2.1]heptane carboxylic acid was found as a principal degradation product with minor quantities of bicyclo[2.2.1]heptan-2-one and 2-bicyclo[2.2.1]heptane acetic acid. When the three degradation products were re-synthesized and tested individually for biodegradability, the former two were found to be ultimately biodegradable after 60 d in OECD 301D tests, thus proving non-persistence. Similarly, 2-bicyclo[2.2.1]heptane acetic acid was found to be degraded significantly, albeit with long lag phases exceeding 60 d in the case of freshwater inoculum, then ultimately reaching the pass level. On the other hand, norbornyl ketones were still only partially biodegradable in the same test. We conclude that despite the potential for ultimate biodegradation of norbornyl-derived ketones, current screening tests yield an incomplete picture of their biodegradability, particularly when applying strict OECD criteria. The appearance of long lag phases when re-testing norbornyl ketone degradation products underlines the importance of extending tests to well beyond 28 and even 60 d in the case of freshwater inocula. Copyright © 2015 Elsevier Ltd. All rights reserved.

How did the economic recession (2008-2010) influence traffic fatalities in OECD-countries?

PubMed

Wegman, Fred; Allsop, Richard; Antoniou, Constantinos; Bergel-Hayat, Ruth; Elvik, Rune; Lassarre, Sylvain; Lloyd, Daryl; Wijnen, Wim

2017-05-01

This paper presents analyses of how the economic recession that started in 2008 has influenced the number of traffic fatalities in OECD countries. Previous studies of the relationship between economic recessions and changes in the number of traffic fatalities are reviewed. Based on these studies, a causal diagram of the relationship between changes of the business cycle and changes in the number of traffic fatalities is proposed. This causal model is tested empirically by means of multivariate analyses and analyses of accident statistics for Great Britain and Sweden. Economic recession, as indicated both by slower growth of, or decline of gross national product, and by increased unemployment is associated with an accelerated decline in the number of traffic fatalities, i.e. a larger decline than the long-term trend that is normal in OECD countries. The principal mechanisms bringing this about are a disproportionate reduction of driving among high-risk drivers, in particular young drivers and a reduction of fatality rate per kilometre of travel, probably attributable to changes in road user behaviour that are only partly observable. The total number of vehicle kilometres of travel did not change very much as a result of the recession. The paper is based on an ITF-report that presents the analyses in greater detail. Copyright © 2017 Elsevier Ltd. All rights reserved.

Increase in neutrophil Fc gamma receptor I expression following interferon gamma treatment in rheumatoid arthritis.

PubMed Central

Goulding, N J; Knight, S M; Godolphin, J L; Guyre, P M

1992-01-01

The therapeutic potential of interferon gamma (IFN gamma) in a number of disease states is still being explored, but progress is hampered by the lack of a suitable measure of in vivo biological activity. To assess the in vivo biological effects of recombinant human IFN gamma (rhIFN gamma), 14 patients were studied in a randomised, prospective, double blind, placebo controlled trial of this cytokine for the treatment of rheumatoid arthritis. The levels of Fc gamma receptors on peripheral blood neutrophils were measured at baseline and after 21 days of once daily, subcutaneous injections of rhIFN gamma or placebo. An induction of neutrophil Fc gamma receptor type I (Fc gamma RI) was seen in the group of patients receiving recombinant human rhIFN gamma but not in those receiving placebo. No change in the expression of Fc gamma RII or Fc gamma RIII was detected. The amount of induction of Fc gamma RI detected on the neutrophils of patients receiving rhIFN gamma did not correlate with clinical measures of response at either 21 days or at the end of the study (24 weeks). No significant clinical responses were observed in the rhIFN gamma group at these times. These data confirm that the reported in vitro effect of IFN gamma on human neutrophil Fc receptor expression can be reproduced in vivo. PMID:1534001

Increase in neutrophil Fc gamma receptor I expression following interferon gamma treatment in rheumatoid arthritis.

PubMed

Goulding, N J; Knight, S M; Godolphin, J L; Guyre, P M

1992-04-01

The therapeutic potential of interferon gamma (IFN gamma) in a number of disease states is still being explored, but progress is hampered by the lack of a suitable measure of in vivo biological activity. To assess the in vivo biological effects of recombinant human IFN gamma (rhIFN gamma), 14 patients were studied in a randomised, prospective, double blind, placebo controlled trial of this cytokine for the treatment of rheumatoid arthritis. The levels of Fc gamma receptors on peripheral blood neutrophils were measured at baseline and after 21 days of once daily, subcutaneous injections of rhIFN gamma or placebo. An induction of neutrophil Fc gamma receptor type I (Fc gamma RI) was seen in the group of patients receiving recombinant human rhIFN gamma but not in those receiving placebo. No change in the expression of Fc gamma RII or Fc gamma RIII was detected. The amount of induction of Fc gamma RI detected on the neutrophils of patients receiving rhIFN gamma did not correlate with clinical measures of response at either 21 days or at the end of the study (24 weeks). No significant clinical responses were observed in the rhIFN gamma group at these times. These data confirm that the reported in vitro effect of IFN gamma on human neutrophil Fc receptor expression can be reproduced in vivo.

Recurrent Education, Policy and Development in OECD Countries: Recurrent Education in the Federal Republic of Germany.

ERIC Educational Resources Information Center

Rudolph, Hedwig; And Others

This report, part of a series on the state of recurrent education in the Organization for Economic Cooperation and Development (OECD) member countries, focuses on recurrent education in West Germany. The West German thrust for continuing adult education has come from business, industry, and the 1969 Labor Promotion Act which publicly funds…

Comparing the Similarities and Differences of PISA 2003 and TIMSS. OECD Education Working Papers, No. 32

ERIC Educational Resources Information Center

Wu, Margaret

2010-01-01

This paper makes an in-depth comparison of the PISA (OECD) and TIMSS (IEA) mathematics assessments conducted in 2003. First, a comparison of survey methodologies is presented, followed by an examination of the mathematics frameworks in the two studies. The methodologies and the frameworks in the two studies form the basis for providing…

Gamma Knife

MedlinePlus

... equipment? How is safety ensured? What is this equipment used for? The Gamma Knife® and its associated ... in size. top of page How does the equipment work? The Gamma Knife® utilizes a technique called ...

Gamma-400 Science Objectives Built on the Current HE Gamma-Ray and CR Results

NASA Technical Reports Server (NTRS)

Moiseev, Alexander; Mitchell, John; Thompson, David

2012-01-01

The main scientific interest of the Russian Gamma-400 team: Observe gamma-rays above approximately 50 GeV with excellent energy and angular resolution with the goals of: (1) Studying the fine spectral structure of the isotropic high-energy gamma-radiation, (2) Attempting to identify the many still-unidentified Fermi-LAT gamma-ray sources. Gamma-400 will likely be the only space-based gamma-ray observatory operating at the end of the decade. In our proposed Gamma-400-LE version, it will substantially improve upon the capabilities of Fermi LAT and AGILE in both LE and HE energy range. Measuring gamma-rays from approx 20 MeV to approx 1 TeV for at least 7 years, Gamma-400-LE will address the topics of dark matter, cosmic ray origin and propagation, neutron stars, flaring pulsars, black holes, AGNs, GRBs, and actively participate in multiwavelength campaigns.

Future Digital Economy: Digital Content Creation, Distribution and Access--Conference Conclusions. OECD Digital Economy Papers No. 118

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2006

2006-01-01

This conference, jointly organised by OECD's Department for Science, Technology and Industry and the Italian Ministry for Innovation and Technology, was attended by approximately 350 representatives from industry, academia and government. Rapporteurs presented summaries in terms of issues and areas where there was agreement and/or convergence…

Trends of Breastfeeding Rate in Korea (1994-2012): Comparison with OECD and Other Countries

PubMed Central

Chung, Sung-Hoon; Kim, Hye-Ryun; Choi, Yong-Sung

2013-01-01

Breastfeeding has numerous benefits both for infants and mothers. WHO, UNICEF, and OECD report the breastfeeding rate (BR) and exclusive breastfeeding rate (EBR) at 3, 4, and 6 months of age for the international comparison. This article investigates the nationwide changes in BR and EBR in Korea from 1994 to 2012. EBR declined from 1994 to 2000, however progressively increased untill 2012. The latest data in 2012 revealed EBRs at 3, 4, and 6 months were 50.0%, 40.5%, and 11.4% respectively. The exclusive formula feeding rate (EFR) was highest in 2000 and gradually declined thereafter. In 2012, the EFRs at 3, 4 and 6 months were 21.7%, 26.5%, and 10.1%. In 2009, the EBRs at 3 and 6 months in the United States were 36.0% and 16.3% compared to 50.0% and 11.4% in Korea. In England, the EBRs were 17% and 12% in 2010. Amongst OECD countries, Hungary ranked highest EBRwith 95%, and Iceland, Norway, Slovak Republic, Australia, New Zealand followed. In conclusion, BRs were lowest in 2000, and there have been remarkable increases in BRs over the past 10 yr in Korea. Although BRs have been increasing, further efforts to increase BRs should be made continuously. PMID:24265518

Genomic sequences of murine gamma B- and gamma C-crystallin-encoding genes: promoter analysis and complete evolutionary pattern of mouse, rat and human gamma-crystallins.

PubMed

Graw, J; Liebstein, A; Pietrowski, D; Schmitt-John, T; Werner, T

1993-12-22

The murine genes, gamma B-cry and gamma C-cry, encoding the gamma B- and gamma C-crystallins, were isolated from a genomic DNA library. The complete nucleotide (nt) sequences of both genes were determined from 661 and 711 bp, respectively, upstream from the first exon to the corresponding polyadenylation sites, comprising more than 2650 and 2890 bp, respectively. The new sequences were compared to the partial cDNA sequences available for the murine gamma B-cry and gamma C-cry, as well as to the corresponding genomic sequences from rat and man, at both the nt and predicted amino acid (aa) sequence levels. In the gamma B-cry promoter region, a canonical CCAAT-box, a TATA-box, putative NF-I and C/EBP sites were detected. An R-repeat is inserted 366 bp upstream from the transcription start point. In contrast, the gamma C-cry promoter does not contain a CCAAT-box, but some other putative binding sites for transcription factors (AP-2, UBP-1, LBP-1) were located by computer analysis. The promoter regions of all six gamma-cry from mouse, rat and human, except human psi gamma F-cry, were analyzed for common sequence elements. A complex sequence element of about 70-80 bp was found in the proximal promoter, which contains a gamma-cry-specific and almost invariant sequence (crygpel) of 14 nt, and ends with the also invariant TATA-box. Within the complex sequence element, a minimum of three further features specific for the gamma A-, gamma B- and gamma D/E/F-cry genes can be defined, at least two of which were recently shown to be functional. In addition to these four sequence elements, a subtype-specific structure of inverted repeats with different-sized spacers can be deduced from the multiple sequence alignment. A phylogenetic analysis based on the promoter region, as well as the complete exon 3 of all gamma-cry from mouse, rat and man, suggests separation of only five gamma-cry subtypes (gamma A-, gamma B-, gamma C-, gamma D- and gamma E/F-cry) prior to species separation.

Predicting diffusion paths and interface motion in gamma/gamma + beta, Ni-Cr-Al diffusion couples

NASA Technical Reports Server (NTRS)

Nesbitt, J. A.; Heckel, R. W.

1987-01-01

A simplified model has been developed to predict Beta recession and diffusion paths in ternary gamma/gamma + beta diffusion couples (gamma:fcc, beta: NiAl structure). The model was tested by predicting beta recession and diffusion paths for four gamma/gamma + beta, Ni-Cr-Al couples annealed for 100 hours at 1200 C. The model predicted beta recession within 20 percent of that measured for each of the couples. The model also predicted shifts in the concentration of the gamma phase at the gamma/gamma + beta interface within 2 at. pct Al and 6 at. pct Cr of that measured in each of the couples. A qualitative explanation based on simple kinetic and mass balance arguments has been given which demonstrates the necessity for diffusion in the two-phase region of certain gamma/gamma + beta, Ni-Cr-Al couples.

Implementation of the OECD principles of good laboratory practice in test facilities complying with a quality system accredited to the ISO/IEC 17025 standard.

PubMed

Feller, Etty

2008-01-01

Laboratories with a quality system accredited to the ISO/IEC 17025 standard have a definite advantage, compared to non-accredited laboratories, when preparing their facilities for the implementation of the principles of good laboratory practice (GLP) of the Organisation for Economic Co-operation and Development (OECD). Accredited laboratories have an established quality system covering the administrative and technical issues specified in the standard. The similarities and differences between the ISO/IEC 17025 standard and the OECD principles of GLP are compared and discussed.

Comparison of gamma-gamma Phase Coarsening Responses of Three Powder Metal Disk Superalloys

NASA Technical Reports Server (NTRS)

Gabb, T. P.; Gayda, J.; Johnson, D. F.; MacKay, R. A.; Rogers, R. B.; Sudbrack, C. K.; Garg, A.; Locci, I. E.; Semiatin, S. L.; Kang, E.

2016-01-01

The phase microstructures of several powder metal (PM) disk superalloys were quantitatively evaluated. Contents, chemistries, and lattice parameters of gamma and gamma strengthening phase were determined for conventionally heat treated Alloy 10, LSHR, and ME3 superalloys, after electrolytic phase extractions. Several of long term heat treatments were then performed, to allow quantification of the precipitation, content, and size distribution of gamma at a long time interval to approximate equilibrium conditions. Additional coarsening heat treatments were performed at multiple temperatures and shorter time intervals, to allow quantification of the precipitation, contents and size distributions of gamma at conditions diverging from equilibrium. Modest differences in gamma and gamma lattice parameters and their mismatch were observed among the alloys, which varied with heat treatment. Yet, gamma coarsening rates were very similar for all three alloys in the heat treatment conditions examined. Alloy 10 had higher gamma dissolution and formation temperatures than LSHR and ME3, but a lower lattice mismatch, which was slightly positive for all three alloys at room temperature. The gamma precipitates of Alloy 10 appeared to remain coherent at higher temperatures than for LSHR and ME3. Higher coarsening rates were observed for gamma precipitates residing along grain boundaries than for those within grains in all three alloys, during slow-moderate quenching from supersolvus solution heat treatments, and during aging at temperatures of 843 C and higher.

Deriving persistence indicators from regulatory water-sediment studies – opportunities and limitations in OECD 308 data.

PubMed

Honti, Mark; Fenner, Kathrin

2015-05-19

The OECD guideline 308 describes a laboratory test method to assess aerobic and anaerobic transformation of organic chemicals in aquatic sediment systems and is an integral part of tiered testing strategies in different legislative frameworks for the environmental risk assessment of chemicals. The results from experiments carried out according to OECD 308 are generally used to derive persistence indicators for hazard assessment or half-lives for exposure assessment. We used Bayesian parameter estimation and system representations of various complexities to systematically assess opportunities and limitations for estimating these indicators from existing data generated according to OECD 308 for 23 pesticides and pharmaceuticals. We found that there is a disparity between the uncertainty and the conceptual robustness of persistence indicators. Disappearance half-lives are directly extractable with limited uncertainty, but they lump degradation and phase transfer information and are not robust against changes in system geometry. Transformation half-lives are less system-specific but require inverse modeling to extract, resulting in considerable uncertainty. Available data were thus insufficient to derive indicators that had both acceptable robustness and uncertainty, which further supports previously voiced concerns about the usability and efficiency of these costly experiments. Despite the limitations of existing data, we suggest the time until 50% of the parent compound has been transformed in the entire system (DegT(50,system)) could still be a useful indicator of persistence in the upper, partially aerobic sediment layer in the context of PBT assessment. This should, however, be accompanied by a mandatory reporting or full standardization of the geometry of the experimental system. We recommend transformation half-lives determined by inverse modeling to be used as input parameters into fate models for exposure assessment, if due consideration is given to their

Innovation in Education. News from the Centre for Educational Research and Innovation OECD Paris. Number 3.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

Brief notices of topics arising during the preceding four months from the Center's continuing program of work on behalf of Member countries of the Organisation for Economic Co-operation and Development (OECD) are given in this news-sheet. CERI's interest and activity focus on three areas: 1) Research into the relations between education and…

Analyzing the Limitations and the Applicability Domain of Water-Sediment Transformation Tests like OECD 308.

PubMed

Ter Horst, Mechteld M S; Koelmans, Albert A

2016-10-04

The assessment of chemical degradation rates from water-sediment experiments like for instance OECD 308 is challenging due to parallel occurrence of processes like degradation, sorption and diffusive transport, at different rates in water and sediment or at their interface. To systematically and quantitatively analyze this limitation, we generated artificial experiment data sets using model simulations and then used these data sets in an inverse modeling exercise to estimate degradation half-lives in water and sediment (DegT50 wat and DegT50 sed ), which then were evaluated against their true values. Results were visualized by chemical space diagrams that identified those substance property combinations for which the OECD 308 test is fundamentally inappropriate. We show that the uncertainty in estimated degradation half-lives in water increases as the process of diffusion to the sediment becomes dominant over degradation in the water. We show that in theory the uncertainty in the estimated DegT50 sed is smaller than the uncertainty in the DegT50 wat . The predictive value of our chemical space diagrams was validated using literature transformation rates and their uncertainties that were inferred from real water-sediment experiments.

[Policies and mental health action plans in OECD: lessons for Quebec?].

PubMed

Thiebaut, Georges-Charles; Farand, Lambert; Fleury, Marie-Josée

2014-01-01

The objectives of this research are: 1) to provide a conceptual framework for analyzing mental health policies; 2) to compare mental health policies across a sample of OECD jurisdictions; 3) to describe configurations of mental health policies; 4) to identify practical implications for the Province of Quebec. This research is a comparative synthetic study of mental health policies. The web sites of the Ministries of health of the thirty-four OECD countries and ten Canadian Provinces were searched for mental health policies proposed within the last fifteen years. Twenty one such policies (with an English or French version) were retrieved, covering thirteen OECD countries, six Canadian Provinces and the WHO. Content analysis was performed based on the categories (differentiation, integration, governance) and sub-categories of the aforementioned conceptual framework. Eight policies that together cover the variations encountered between all policies were used to identify typical configurations. A conceptual framework derived from Parsons' Theory of Social Action posits that social action systems must exhibit a level of internal differentiation that corresponds to the heterogeneity of their external environment and also a level of integration that allows them to remain coherent despite the complexity of their environment. Governance mechanisms help them maintain an equilibrium between differentiation and integration.In terms of differentiation, mental health policies exhibit much variation between the needs and the groups that are prioritized (age, gender, ethnicity, culture, etc.), the types of interventions that are proposed (promotion, prevention, treatment, rehabilitation, etc.), the systemic levels at which interventions take place (society, government as a whole, health care system, organizations, programs, individuals), and the level of specification and scientific basis of proposed interventions. In terms of integration, policies promote various mechanisms

SUPPLEMENTARY COMPARISON: Final report on supplementary comparison APMP-T-S3-03 of industrial platinum resistance and liquid in glass thermometers from -40 °C to 250 °C

NASA Astrophysics Data System (ADS)

Norranim, Uthai; Nguyen, Mong Kim; Ballico, Mark J.

2007-01-01

Industrial thermometers such as industrial platinum resistance thermometers (iprts) and liquid-in-glass thermometers (LIGTs) are widely used in industry. Because Key Comparisons are limited to direct realizations of ITS-90, and not all APMP NMIs have participated in them, the national metrology institutes (NMIs) of Thailand and Australia (NIMT and NIMA) organized an APMP supplementary comparison to support the approval of CMCs (calibration and measurement capabilities) for these laboratories. The comparison, performed in 2003, covered the range from -40.0 °C to 250.0 °C, using IPRTs (Hart Scientific 5626-12-S), total immersion (ASTM 62C, 120C) and partial immersion (ASTM 40C) LIGTs. Ten NMIs from the APMP: KIM-LIPI (Indonesia), ITDI (Philippines), MSL (New Zealand), NBSM (Nepal), NMIA (Australia), NIMT (Thailand), SCL (Hong Kong), SIRIM (Malaysia), SPRING (Singapore) and VMI (Vietnam) were divided into two loops to shorten the circulation time, and these were linked by the two pilot laboratories. This report describes details of the artifacts, the circulation schedule, the measurement procedures, the results submitted by participants, uncertainties and the analysis of the results. Reference values calculated using simple mean, median and weighted mean were consistent with each other, but as the Birge criterion was satisfied, the weighted mean with its lower uncertainty was adopted. The artifacts were found to be stable over the comparison and the results of the loop linking labs consistent, allowing an uncertainty of 2 mK to 4 mK to be achieved for the IPRT reference value and 10 mK to 20 mK for the LIGT reference values. These uncertainties allowed the comparison data to be used to adequately test the uncertainties of all the participant laboratories, and hence to directly support their CMC claims. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database

The gamma-ray observatory

NASA Technical Reports Server (NTRS)

1991-01-01

An overview is given of the Gamma Ray Observatory (GRO) mission. Detection of gamma rays and gamma ray sources, operations using the Space Shuttle, and instruments aboard the GRO, including the Burst and Transient Source Experiment (BATSE), the Oriented Scintillation Spectrometer Experiment (OSSE), the Imaging Compton Telescope (COMPTEL), and the Energetic Gamma Ray Experiment Telescope (EGRET) are among the topics surveyed.

High-frequency gamma oscillations coexist with low-frequency gamma oscillations in the rat visual cortex in vitro.

PubMed

Oke, Olaleke O; Magony, Andor; Anver, Himashi; Ward, Peter D; Jiruska, Premysl; Jefferys, John G R; Vreugdenhil, Martin

2010-04-01

Synchronization of neuronal activity in the visual cortex at low (30-70 Hz) and high gamma band frequencies (> 70 Hz) has been associated with distinct visual processes, but mechanisms underlying high-frequency gamma oscillations remain unknown. In rat visual cortex slices, kainate and carbachol induce high-frequency gamma oscillations (fast-gamma; peak frequency approximately 80 Hz at 37 degrees C) that can coexist with low-frequency gamma oscillations (slow-gamma; peak frequency approximately 50 Hz at 37 degrees C) in the same column. Current-source density analysis showed that fast-gamma was associated with rhythmic current sink-source sequences in layer III and slow-gamma with rhythmic current sink-source sequences in layer V. Fast-gamma and slow-gamma were not phase-locked. Slow-gamma power fluctuations were unrelated to fast-gamma power fluctuations, but were modulated by the phase of theta (3-8 Hz) oscillations generated in the deep layers. Fast-gamma was spatially less coherent than slow-gamma. Fast-gamma and slow-gamma were dependent on gamma-aminobutyric acid (GABA)(A) receptors, alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptors and gap-junctions, their frequencies were reduced by thiopental and were weakly dependent on cycle amplitude. Fast-gamma and slow-gamma power were differentially modulated by thiopental and adenosine A(1) receptor blockade, and their frequencies were differentially modulated by N-methyl-D-aspartate (NMDA) receptors, GluK1 subunit-containing receptors and persistent sodium currents. Our data indicate that fast-gamma and slow-gamma both depend on and are paced by recurrent inhibition, but have distinct pharmacological modulation profiles. The independent co-existence of fast-gamma and slow-gamma allows parallel processing of distinct aspects of vision and visual perception. The visual cortex slice provides a novel in vitro model to study cortical high-frequency gamma oscillations.

A method to describe inelastic gamma field distribution in neutron gamma density logging.

PubMed

Zhang, Feng; Zhang, Quanying; Liu, Juntao; Wang, Xinguang; Wu, He; Jia, Wenbao; Ti, Yongzhou; Qiu, Fei; Zhang, Xiaoyang

2017-11-01

Pulsed neutron gamma density logging (NGD) is of great significance for radioprotection and density measurement in LWD, however, the current methods have difficulty in quantitative calculation and single factor analysis for the inelastic gamma field distribution. In order to clarify the NGD mechanism, a new method is developed to describe the inelastic gamma field distribution. Based on the fast-neutron scattering and gamma attenuation, the inelastic gamma field distribution is characterized by the inelastic scattering cross section, fast-neutron scattering free path, formation density and other parameters. And the contribution of formation parameters on the field distribution is quantitatively analyzed. The results shows the contribution of density attenuation is opposite to that of inelastic scattering cross section and fast-neutron scattering free path. And as the detector-spacing increases, the density attenuation gradually plays a dominant role in the gamma field distribution, which means large detector-spacing is more favorable for the density measurement. Besides, the relationship of density sensitivity and detector spacing was studied according to this gamma field distribution, therefore, the spacing of near and far gamma ray detector is determined. The research provides theoretical guidance for the tool parameter design and density determination of pulsed neutron gamma density logging technique. Copyright © 2017 Elsevier Ltd. All rights reserved.

Suicide rates in European OECD nations converged during the period 1990-2010.

PubMed

Bremberg, Sven G

2017-05-01

The aim of this study was to investigate, with multiple regression analyses, the effect of selected characteristics on the rate of decrease of suicide rates in 21 OECD (Organisation for Economic Co-operation and Development) nations over the period 1990-2010, with initial levels of suicide rates taken into account. The rate of decrease seems mainly (83%) to be determined by the initial suicide rates in 1990. In nations with relatively high initial rates, the rates decreased faster. The suicide rates also converged. The study indicates that beta convergence alone explained most of the cross-national variations.

The gamma cycle.

PubMed

Fries, Pascal; Nikolić, Danko; Singer, Wolf

2007-07-01

Activated neuronal groups typically engage in rhythmic synchronization in the gamma-frequency range (30-100 Hz). Experimental and modeling studies demonstrate that each gamma cycle is framed by synchronized spiking of inhibitory interneurons. Here, we review evidence suggesting that the resulting rhythmic network inhibition interacts with excitatory input to pyramidal cells such that the more excited cells fire earlier in the gamma cycle. Thus, the amplitude of excitatory drive is recoded into phase values of discharges relative to the gamma cycle. This recoding enables transmission and read out of amplitude information within a single gamma cycle without requiring rate integration. Furthermore, variation of phase relations can be exploited to facilitate or inhibit exchange of information between oscillating cell assemblies. The gamma cycle could thus serve as a fundamental computational mechanism for the implementation of a temporal coding scheme that enables fast processing and flexible routing of activity, supporting fast selection and binding of distributed responses. This review is part of the INMED/TINS special issue Physiogenic and pathogenic oscillations: the beauty and the beast, based on presentations at the annual INMED/TINS symposium (http://inmednet.com).

Validation of the OECD reproduction test guideline with the New Zealand mudsnail Potamopyrgus antipodarum using trenbolone and prochloraz.

PubMed

Geiß, Cornelia; Ruppert, Katharina; Askem, Clare; Barroso, Carlos; Faber, Daniel; Ducrot, Virginie; Holbech, Henrik; Hutchinson, Thomas H; Kajankari, Paula; Kinnberg, Karin Lund; Lagadic, Laurent; Matthiessen, Peter; Morris, Steve; Neiman, Maurine; Penttinen, Olli-Pekka; Sanchez-Marin, Paula; Teigeler, Matthias; Weltje, Lennart; Oehlmann, Jörg

2017-04-01

The Organisation for Economic Cooperation and Development (OECD) provides several standard test methods for the environmental hazard assessment of chemicals, mainly based on primary producers, arthropods, and fish. In April 2016, two new test guidelines with two mollusc species representing different reproductive strategies were approved by OECD member countries. One test guideline describes a 28-day reproduction test with the parthenogenetic New Zealand mudsnail Potamopyrgus antipodarum. The main endpoint of the test is reproduction, reflected by the embryo number in the brood pouch per female. The development of a new OECD test guideline involves several phases including inter-laboratory validation studies to demonstrate the robustness of the proposed test design and the reproducibility of the test results. Therefore, a ring test of the reproduction test with P. antipodarum was conducted including eight laboratories with the test substances trenbolone and prochloraz and results are presented here. Most laboratories could meet test validity criteria, thus demonstrating the robustness of the proposed test protocol. Trenbolone did not have an effect on the reproduction of the snails at the tested concentration range (nominal: 10-1000 ng/L). For prochloraz, laboratories produced similar EC 10 and NOEC values, showing the inter-laboratory reproducibility of results. The average EC 10 and NOEC values for reproduction (with coefficient of variation) were 26.2 µg/L (61.7%) and 29.7 µg/L (32.9%), respectively. This ring test shows that the mudsnail reproduction test is a well-suited tool for use in the chronic aquatic hazard and risk assessment of chemicals.

A Platinum-Enriched gamma+gamma' Two-Phase Bond Coat on Ni-Base Superalloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Ying; Pint, Bruce A; Haynes, James A

2005-01-01

Pt-enriched {gamma} + {gamma}{prime} two-phase coating was applied to directionally-solidified Ni-based superalloy Ren{acute e} 142 substrates with three different Hf levels (0.02, 0.76, and 1.37 wt.%). The coating was prepared by electroplating a thin layer of Pt on the superalloy followed by a diffusion treatment. The as-deposited coating exhibited a {gamma} + {gamma}{prime} two-phase microstructure with a major composition of Ni-16Al-18Pt-7Cr-9Co (in at.%) along with some incorporation of refractory elements from the substrates. Cyclic oxidation testing at 1100 C in air indicated improved oxidation resistance of the Ren{acute e} 142 alloys with the Pt-enriched {gamma} + {gamma}{prime} coatings. In addition,more » the oxidation resistance of both uncoated and coated alloys was proportional to the Hf content in the substrate. Compared with the single-phase {beta}-(Ni,Pt)Al coating, slightly higher mass gains and localized spallation were observed on the {gamma} + {gamma}{prime} two-phase coating, which might be due to the segregation of refractory elements and high sulfur levels in these superalloy substrates.« less

Gamma ray transients

NASA Technical Reports Server (NTRS)

Cline, Thomas L.

1987-01-01

The discovery of cosmic gamma ray bursts was made with systems designed at Los Alamos Laboratory for the detection of nuclear explosions beyond the atmosphere. HELIOS-2 was the first gamma ray burst instrument launched; its initial results in 1976, seemed to deepen the mystery around gamma ray transients. Interplanetary spacecraft data were reviewed in terms of explaining the behavior and source of the transients.

Expression of peroxisome proliferator-activated receptor gamma (PPAR-gamma) in canine nasal carcinomas.

PubMed

Paciello, O; Borzacchiello, G; Varricchio, E; Papparella, S

2007-10-01

Peroxisome proliferator-activated receptor gamma (PPAR-gamma) is a ligand-activated transcriptional factor belonging to the steroid receptor superfamily. PPAR-gamma is expressed in multiple normal and neoplastic tissues, such as the breast, colon, lung, ovary and placenta. In addition to adipogenic and anti-inflammatory effects, PPAR-gamma activation has been shown to be anti-proliferative by its differentiation-promoting effect, suggesting that activation of PPAR-gamma may be useful in slowing or arresting the proliferation of de-differentiated tumour cells. In this study, we investigated the expression of PPAR-gamma in normal and neoplastic canine nasal epithelium. Twenty-five samples composed of five normal nasal epithelia and 20 canine nasal carcinomas, were immunohistochemically stained for PPAR-gamma. The specificity of the antibody was verified by Western Blot analysis. Confocal laser scanning microscopical investigation was also performed. In normal epithelium, the staining pattern was cytoplasmic and polarized at the cellular free edge. In carcinomas, the neoplastic cells showed mainly strong cytoplasmatic PPAR-gamma expression; moreover, perinuclear immunoreactivity was also detected and few neoplastic cells exhibited a nuclear positivity. Our results demonstrate different patterns of PPAR-gamma expression in normal canine nasal epithelium when compared with canine nasal carcinoma. The importance of this transcription factor in the pathophysiology of several different tumours has stimulated much research in this field and has opened new opportunities for the treatment of the tumours.

High temperature blackbody BB2000/40 for calibration of radiation thermometers and thermocouple

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ogarev, S. A.; Khlevnoy, B. B.; Samoylov, M. L.

2013-09-11

The cavity-type high temperature blackbody (HTBB) models of BB3200/3500 series are the most spread among metrological institutes worldwide as sources for radiometry and radiation thermometry, due to their ultra high working temperatures, high emissivity and stability. The materials of radiating cavities are graphite, pyrolytic graphite (PG) and their combination. The paper describes BB2000/40 blackbody with graphite-tube cavity that was developed for calibration of radiation thermometers at SCEI (Singapore). The peculiarity of BB2000/40 is a possibility to use it, besides calibration of pyrometers, as an instrument for thermocouples calibration. Operating within the temperature range from 900 °C to 2000 °C, themore » blackbody has a wide cavity opening of 40 mm. Emissivity of the cavity, with PG heater rings replaced partly by graphite elements, was estimated as 0.998 ± 0.0015 in the spectral range from 350 nm to 2000 nm. The uniformity along the cavity axis, accounting for 10 °C, was measured using a B-type thermocouple at 1500 °C. The BB2000/40, if necessary, can be easily modified, by replacing the graphite radiator with a set of PG rings, to be able to reach temperatures as high as 3200 °C. The HTBB utilizes an optical feedback system which allows temperature stabilization within 0.1 °C. This rear-view feedback allows the whole HTBB aperture to be used for measurements.« less

Cloning, sequencing and expression of white rhinoceros (Ceratotherium simum) interferon-gamma (IFN-gamma) and the production of rhinoceros IFN-gamma specific antibodies.

PubMed

Morar, D; Tijhaar, E; Negrea, A; Hendriks, J; van Haarlem, D; Godfroid, J; Michel, A L; Rutten, V P M G

2007-01-15

Bovine tuberculosis (BTB) is endemic in African buffalo (Syncerus caffer) in the Kruger National Park (KNP). In addition to buffalo, Mycobacterium bovis has been found in at least 14 other mammalian species in South Africa, including kudu (Tragelaphus strepsiceros), Chacma baboon (Papio ursinus) and lion (Panthera leo). This has raised concern about the spillover into other potentially susceptible species like rhinoceros, thus jeopardising breeding and relocation projects aiming at the conservation of biodiversity. Hence, procedures to screen for and diagnose BTB in black rhinoceros (Diceros bicornis) and white rhinoceros (Ceratotherium simum) need to be in place. The Interferon-gamma (IFN-gamma) assay is used as a routine diagnostic tool to determine infection of cattle and recently African buffalo, with M. bovis and other mycobacteria. The aim of the present work was to develop reagents to set up a rhinoceros IFN-gamma (RhIFN-gamma) assay. The white rhinoceros IFN-gamma gene was cloned, sequenced and expressed as a mature protein. Amino acid (aa) sequence analysis revealed that RhIFN-gamma shares a homology of 90% with equine IFN-gamma. Monoclonal antibodies, as well as polyclonal chicken antibodies (Yolk Immunoglobulin-IgY) with specificity for recombinant RhIFN-gamma were produced. Using the monoclonals as capture antibodies and the polyclonal IgY for detection, it was shown that recombinant as well as native white rhinoceros IFN-gamma was recognised. This preliminary IFN-gamma enzyme-linked immunosorbent assay (ELISA), has the potential to be developed into a diagnostic assay for M. bovis infection in rhinoceros.

Integrated Approaches to Testing and Assessment: OECD Activities on the Development and Use of Adverse Outcome Pathways and Case Studies.

PubMed

Sakuratani, Yuki; Horie, Masashi; Leinala, Eeva

2018-01-09

The Organisation for Economic Co-operation and Development (OECD) works with member countries and other stakeholders to improve and harmonize chemical assessment methods. In 2012, the OECD Adverse Outcome Pathways (AOPs) Development Programme started. The Programme has published six AOPs thus far and more than 60 AOPs are under various stages of development under the Programme. This article reviews recent OECD activities on the use of AOPs in developing Integrated Approaches to Testing and Assessments (IATAs). The guidance document for the use of AOPs in developing IATA, published in 2016, provides a framework for developing and using IATA and describes how IATA can be based on an AOP. The guidance document on the reporting of defined approaches to be used within IATA, also published in 2016, provides a set of principles for reporting defined approaches to testing and assessment to facilitate their evaluation. In the guidance documents, the AOP concept plays an important role for building IATA approaches in a science-based and transparent way. In 2015, the IATA Case Studies Project was launched to increase experience with the use of IATA and novel hazard methodologies by developing case studies, which constitute examples of predictions that are fit-for-regulatory use. This activity highlights the importance of international collaboration for harmonizing and improving chemical safety assessment methods. © 2018 Nordic Association for the Publication of BCPT (former Nordic Pharmacological Society).

Sensitivity Analysis of OECD Benchmark Tests in BISON

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swiler, Laura Painton; Gamble, Kyle; Schmidt, Rodney C.

2015-09-01

This report summarizes a NEAMS (Nuclear Energy Advanced Modeling and Simulation) project focused on sensitivity analysis of a fuels performance benchmark problem. The benchmark problem was defined by the Uncertainty Analysis in Modeling working group of the Nuclear Science Committee, part of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD ). The benchmark problem involv ed steady - state behavior of a fuel pin in a Pressurized Water Reactor (PWR). The problem was created in the BISON Fuels Performance code. Dakota was used to generate and analyze 300 samples of 17 input parameters defining coremore » boundary conditions, manuf acturing tolerances , and fuel properties. There were 24 responses of interest, including fuel centerline temperatures at a variety of locations and burnup levels, fission gas released, axial elongation of the fuel pin, etc. Pearson and Spearman correlatio n coefficients and Sobol' variance - based indices were used to perform the sensitivity analysis. This report summarizes the process and presents results from this study.« less

Measurements of the $$\\mathrm{ pp \\to W \\gamma\\gamma }$$ and $$\\mathrm{ pp \\to Z \\gamma\\gamma }$$ cross sections and limits on anomalous quartic gauge couplings at $$\\sqrt{s} =$$ 8 TeV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sirunyan, A. M.; Tumasyan, A.; Adam, W.

Here, measurements are presented ofmore » $$ \\mathrm{ W \\gamma\\gamma } $$ and $$ \\mathrm{ Z \\gamma\\gamma } $$ production in proton-proton collisions. Fiducial cross sections are reported based on a data sample corresponding to an integrated luminosity of 19.4 fb$$^{-1}$$ collected with the CMS detector at a center-of-mass energy of 8 TeV. Signal is identified through the $$\\mathrm{ W } \\to \\ell\

Measurements of the $$\\mathrm{ pp \\to W \\gamma\\gamma }$$ and $$\\mathrm{ pp \\to Z \\gamma\\gamma }$$ cross sections and limits on anomalous quartic gauge couplings at $$\\sqrt{s} =$$ 8 TeV

DOE PAGES

Sirunyan, A. M.; Tumasyan, A.; Adam, W.; ...

2017-10-11

Here, measurements are presented ofmore » $$ \\mathrm{ W \\gamma\\gamma } $$ and $$ \\mathrm{ Z \\gamma\\gamma } $$ production in proton-proton collisions. Fiducial cross sections are reported based on a data sample corresponding to an integrated luminosity of 19.4 fb$$^{-1}$$ collected with the CMS detector at a center-of-mass energy of 8 TeV. Signal is identified through the $$\\mathrm{ W } \\to \\ell\

Ti-in-Zircon Thermometer: Preliminary Results

NASA Astrophysics Data System (ADS)

Fu, B.; Cavosie, A. J.; Clechenko, C. C.; Fournelle, J.; Kita, N. T.; Lackey, J.; Page, F.; Wilde, S. A.; Valley, J. W.

2005-12-01

The titanium in zircon thermometer has been applied to 167 zircons from diverse rock types. These rocks include metamorphosed anorthosite and gabbro (1.15 Ga, intrusion age), and unmetamorphosed granitic pegmatite (0.9 Ga) from the Adirondack Highlands; metaluminous and peraluminous granites (114-90 Ma) of the Sierra Nevada Batholith; megacrysts from kimberlite pipes in southern Africa, Brazil, and Siberia; and detrital zircons (4.4-3.9 Ga) of metaconglomerate from Jack Hills, Western Australia. Titanium concentration in zircon was analysed using a CAMECA IMS-1280 ion microprobe (see Page et al., this volume). Spot analyses were correlated to U-Pb SHRIMP pits especially for Adirondack and Jack Hills zircons. The majority of zircons have Ti-content less than 10 ppm. Variability, in excess of analytical precision, within individual zircons is observed in about one-third of crystals. In general, there is no systematic change in Ti from core to rim (identified by cathodoluminescence) of zircons, or with regard to age, U content, Th/U ratio, or U-Pb age concordance for these non-metamict grains. The average temperatures for zircon crystallization in different rock suites using the experimental/empirical calibration of Watson and Harrison (W&H, 2005, Science 308:841), assuming the presence of rutile and quartz, are estimated to be: anorthosite 735±41°C (1SD, n=24; Ti = 10±5 ppm); metagabbro 714±31°C (n=19; Ti = 8±4 ppm); Adirondack pegmatite 500±16°C (n=5; Ti = 0.3±0.1 ppm); metaluminous and peraluminous granites from Sierra Nevada 681±67°C (n=53; Ti = 6±5 ppm) and 613±75°C (n=68; Ti = 3±3 ppm); kimberlite megacrysts 740±64°C (n=169; Ti = 14±13 ppm) (Page et al., this volume); and detrital zircons from Jack Hills metaconglomerate 718±63°C (n=64; Ti = 10±9 ppm). Most of the host rocks contain ilmenite or titanite suggesting that α(TiO2)>0.5, but rutile activity is unknown for megacrysts and detrital zircons. Pegmatite contains no Ti-rich minerals

Basics of Gamma Ray Detection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stinnett, Jacob; Venkataraman, Ram

The objective of this training is to explain the origin of x-rays and gamma rays, gamma ray interactions with matter, detectors and electronics used in gamma ray-spectrometry, and features of a gamma-ray spectrum for nuclear material that is safeguarded.

REPORT ON THE OECD CONFERENCE ON SYSTEM ANALYSIS TECHNIQUES IN EDUCATIONAL PLANNING (PARIS, FRANCE, JANUARY 25-27, 1967).

ERIC Educational Resources Information Center

STOLLER, DAVID S.

AN INTERNATIONAL GROUP FOR THE ORGANIZATION FOR ECONOMIC COOPERATION AND DEVELOPMENT (OECD) MET TO EXCHANGE METHODS OF EDUCATIONAL PLANNING, TECHNIQUES, AND PROGRESS, AND TO DISCUSS MEANS OF MAKING EDUCATION AVAILABLE TO ALL SOCIOECONOMIC LEVELS OF SOCIETY. RAPIDLY EXPANDING INDUSTRIAL, TECHNOLOGICAL, MILITARY, AND ADMINISTRATIVE PROGRAMS IN ALL…

Dynamic gamma knife radiosurgery

NASA Astrophysics Data System (ADS)

Luan, Shuang; Swanson, Nathan; Chen, Zhe; Ma, Lijun

2009-03-01

Gamma knife has been the treatment of choice for various brain tumors and functional disorders. Current gamma knife radiosurgery is planned in a 'ball-packing' approach and delivered in a 'step-and-shoot' manner, i.e. it aims to 'pack' the different sized spherical high-dose volumes (called 'shots') into a tumor volume. We have developed a dynamic scheme for gamma knife radiosurgery based on the concept of 'dose-painting' to take advantage of the new robotic patient positioning system on the latest Gamma Knife C™ and Perfexion™ units. In our scheme, the spherical high dose volume created by the gamma knife unit will be viewed as a 3D spherical 'paintbrush', and treatment planning reduces to finding the best route of this 'paintbrush' to 'paint' a 3D tumor volume. Under our dose-painting concept, gamma knife radiosurgery becomes dynamic, where the patient moves continuously under the robotic positioning system. We have implemented a fully automatic dynamic gamma knife radiosurgery treatment planning system, where the inverse planning problem is solved as a traveling salesman problem combined with constrained least-square optimizations. We have also carried out experimental studies of dynamic gamma knife radiosurgery and showed the following. (1) Dynamic gamma knife radiosurgery is ideally suited for fully automatic inverse planning, where high quality radiosurgery plans can be obtained in minutes of computation. (2) Dynamic radiosurgery plans are more conformal than step-and-shoot plans and can maintain a steep dose gradient (around 13% per mm) between the target tumor volume and the surrounding critical structures. (3) It is possible to prescribe multiple isodose lines with dynamic gamma knife radiosurgery, so that the treatment can cover the periphery of the target volume while escalating the dose for high tumor burden regions. (4) With dynamic gamma knife radiosurgery, one can obtain a family of plans representing a tradeoff between the delivery time and the

Trends and determinants of weight gains among OECD countries: an ecological study.

PubMed

Nghiem, S; Vu, X-B; Barnett, A

2018-06-01

Obesity has become a global issue with abundant evidence to indicate that the prevalence of obesity in many nations has increased over time. The literature also reports a strong association between obesity and economic development, but the trend that obesity growth rates may converge over time has not been examined. We propose a conceptual framework and conduct an ecological analysis on the relationship between economic development and weight gain. We also test the hypothesis that weight gain converges among countries over time and examine determinants of weight gains. This is a longitudinal study of 34 Organisation for Economic Cooperation and Development (OECD) countries in the years 1980-2008 using publicly available data. We apply a dynamic economic growth model to test the hypothesis that the rate of weight gains across countries may converge over time. We also investigate the determinants of weight gains using a longitudinal regression tree analysis. We do not find evidence that the growth rates of body weight across countries converged for all countries. However, there were groups of countries in which the growth rates of body weight converge, with five groups for males and seven groups for females. The predicted growth rates of body weight peak when gross domestic product (GDP) per capita reaches US$47,000 for males and US$37,000 for females in OECD countries. National levels of consumption of sugar, fat and alcohol were the most important contributors to national weight gains. National weight gains follow an inverse U-shape curve with economic development. Excessive calorie intake is the main contributor to weight gains. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Effects of Migration on Sending Countries: What Do We Know? OECD Development Centre Working Paper No. 250

ERIC Educational Resources Information Center

Katseli, Louka T.; Lucas, Robert E. B.; Xenogiani, Theodora

2006-01-01

This report evaluates the evidence on how migration may promote or hinder development in countries of origin, and explores possible win-win solutions for both sending and receiving countries. The analysis of recent OECD data of foreign-born nationals into Europe documents the presence of multiple migration patterns and reveals that the EU lags…

Socialisation, Learning and the OECD's "Reviews of National Policies for Education": The Case of Sweden

ERIC Educational Resources Information Center

Grek, Sotiria

2017-01-01

This paper suggests that the Organisation for Economic Cooperation and Development (OECD) education policy work of the last 20 years has achieved a paradigmatic shift in the thinking and framing of education; however, this process was not exclusively based and dependent upon the cold rationality of numbers. Crucially, as the article will show, it…

International comparisons of health system performance among OECD countries: opportunities and data privacy protection challenges.

PubMed

Oderkirk, Jillian; Ronchi, Elettra; Klazinga, Niek

2013-09-01

Health data constitute a significant resource in most OECD countries that could be used to improve health system performance. Well-intended policies to allay concerns about breaches of confidentiality and to reduce potential misuse of personal health information may be limiting data use. A survey of 20 OECD countries explored the extent to which countries have developed and use personal health data and the reasons why data use may be problematic in some. Countries are divided, with one-half engaged regularly in national data linkage studies to monitor health care quality. Country variation is linked to risk management in granting an exemption to patient consent requirements; in sharing identifiable data among government authorities; and in project approvals and granting access to data. The resources required to comply with data protection requirements is a secondary problem. The sharing of person-level data across borders for international comparisons is rarely reported and there were few examples of studies of health system performance. Laws and policies enabling data sharing and data linkage are needed to strengthen national information infrastructure. To develop international studies comparing health care quality and health system performance, actions are needed to address heterogeneity in data protection practices. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Galactic plane gamma-radiation

NASA Technical Reports Server (NTRS)

Hartman, R. C.; Kniffen, D. A.; Thompson, D. J.; Fichtel, C. E.; Ogelman, H. B.; Tumer, T.; Ozel, M. E.

1979-01-01

Analysis of the SAS 2 data together with the COS B results shows that the distribution of galactic gamma-radiation has several similarities to that of other large-scale tracers of galactic structure. The radiation is primarily confined to a thin disc which exhibits offsets from b = 0 degrees similar to warping at radio frequencies. The principal distinction of the gamma-radiation is a stronger contrast in intensity between the region from 310 to 45 degrees in longitude and the regions away from the center that can be attributed to a variation in cosmic-ray density as a function of position in Galaxy. The diffuse galactic gamma-ray energy spectrum shows no significant variation in direction, and the spectrum seen along the plane is the same as that for the galactic component of the gamma-radiation at high altitudes. The uniformity of the galactic gamma-ray spectrum, the smooth decrease in intensity as a function of altitude, and the absence of any galactic gamma-ray sources at high altitudes indicate a diffuse origin for bulk of the galactic gamma-radiation rather than a collection of localized sources.

Gamma-ray burster recurrence timescales

NASA Technical Reports Server (NTRS)

Schaefer, B. E.; Cline, T. L.

1984-01-01

Three optical transients have been found which are associated with gamma-ray bursters (GRBs). The deduced recurrence timescale for these optical transients (tau sub opt) will depend on the minimum brightness for which a flash would be detected. A detailed analysis using all available data of tau sub opt as a function of E(gamma)/E(opt) is given. For flashes similar to those found in the Harvard archives, the best estimate of tau sub opt is 0.74 years, with a 99% confidence interval from 0.23 years to 4.7 years. It is currently unclear whether the optical transients from GRBs also give rise to gamma-ray events. One way to test this association is to measure the recurrence timescale of gamma-ray events tau sub gamma. A total of 210 gamma-ray error boxes were examined and it was found that the number of observed overlaps is not significantly different from the number expected from chance coincidence. This observation can be used to place limits on tau sub gamma for an assumed luminosity function. It was found that tau sub gamma is approx. 10 yr if bursts are monoenergetic. However, if GRBs have a power law luminosity function with a wide dynamic range, then the limit is tau sub gamma 0.5 yr. Hence, the gamma-ray data do not require tau sub gamma and tau sub opt to be different.

Tuning-AHELO Conceptual Framework of Expected and Desired Learning Outcomes in Economics. OECD Education Working Papers No. 59

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2011

2011-01-01

The Organisation for Economic Cooperation and Development (OECD) Secretariat, at the invitation of the AHELO Group of National Experts, contracted the Tuning Association to undertake initial development work on learning outcomes to be used for valid and reliable assessments of students from diverse institutions and countries. The two disciplines…

Gamma watermarking

DOEpatents

Ishikawa, Muriel Y.; Wood, Lowell L.; Lougheed, Ronald W.; Moody, Kenton J.; Wang, Tzu-Fang

2004-05-25

A covert, gamma-ray "signature" is used as a "watermark" for property identification. This new watermarking technology is based on a unique steganographic or "hidden writing" digital signature, implemented in tiny quantities of gamma-ray-emitting radioisotopic material combinations, generally covertly emplaced on or within an object. This digital signature may be readily recovered at distant future times, by placing a sensitive, high energy-resolution gamma-ray detecting instrument reasonably precisely over the location of the watermark, which location may be known only to the object's owner; however, the signature is concealed from all ordinary detection means because its exceedingly low level of activity is obscured by the natural radiation background (including the gamma radiation naturally emanating from the object itself, from cosmic radiation and material surroundings, from human bodies, etc.). The "watermark" is used in object-tagging for establishing object identity, history or ownership. It thus may serve as an aid to law enforcement officials in identifying stolen property and prosecuting theft thereof. Highly effective, potentially very low cost identification-on demand of items of most all types is thus made possible.

The Gamma-ray Sky with Fermi

NASA Technical Reports Server (NTRS)

Thompson, David

2012-01-01

Gamma rays reveal extreme, nonthermal conditions in the Universe. The Fermi Gamma-ray Space Telescope has been exploring the gamma-ray sky for more than four years, enabling a search for powerful transients like gamma-ray bursts, novae, solar flares, and flaring active galactic nuclei, as well as long-term studies including pulsars, binary systems, supernova remnants, and searches for predicted sources of gamma rays such as dark matter annihilation. Some results include a stringent limit on Lorentz invariance derived from a gamma-ray burst, unexpected gamma-ray variability from the Crab Nebula, a huge gamma-ray structure associated with the center of our galaxy, surprising behavior from some gamma-ray binary systems, and a possible constraint on some WIMP models for dark matter.

Gamma Ray Astronomy

NASA Technical Reports Server (NTRS)

Wu, S. T.

2000-01-01

The project has progressed successfully during this period of performance. The highlights of the Gamma Ray Astronomy teams efforts are: (1) Support daily BATSE data operations, including receipt, archival and dissemination of data, quick-look science analysis, rapid gamma-ray burst and transient monitoring and response efforts, instrument state-of-health monitoring, and instrument commanding and configuration; (2) On-going scientific analysis, including production and maintenance of gamma-ray burst, pulsed source and occultation source catalogs, gamma-ray burst spectroscopy, studies of the properties of pulsars and black holes, and long-term monitoring of hard x-ray sources; (3) Maintenance and continuous improvement of BATSE instrument response and calibration data bases; (4) Investigation of the use of solid state detectors for eventual application and instrument to perform all sky monitoring of X-Ray and Gamma sources with high sensitivity; and (5) Support of BATSE outreach activities, including seminars, colloquia and World Wide Web pages. The highlights of this efforts can be summarized in the publications and presentation list.

A comparative study of biodegradability of a carcinogenic aromatic amine (4,4'-diaminodiphenylmethane) with OECD 301 test methods.

PubMed

Mei, Cheng-Fang; Liu, Yan-Zhen; Long, Wei-Nian; Sun, Guo-Ping; Zeng, Guo-Qu; Xu, Mei-Ying; Luan, Tian-Gang

2015-01-01

4,4'-Diaminodiphenylmethane (MDA) is a widely used compound in industries. Studies on the biodegradability of MDA are necessary for environmental hazard identification and risk assessment. Previous studies have suggested that MDA was not readily biodegradable. In the present study, three batches of biodegradation tests (OECD 301A, B, D and F tests) were performed on MDA in June, August and December of 2012. MDA was found to be readily biodegradable and produced colored intermediates in the 301A, B and F test systems. MDA biodegradation measurements were consistent among the three batches of tests. Differences in the extent of biodegradation determined in different methods originated from different test conditions and assessment endpoints. The 301D test has stringent test conditions and is usually performed on chemicals that are toxic to microorganisms, so the test results obtained from 301D tests are less meaningful for evaluating the biodegradability of MDA. The low MDA biodegradation measurements in the 301B tests compared to the 301A and F tests were due to the assessment method, which did not account for MDA incorporation into biomass in its calculation of CO2 formation rate. The differences in the biodegradation rates, as measured by the different OECD 301 test systems, could also be related to the structure and properties of the chemical. For test substances that can be assessed by all OECD 301 test methods, the highest biodegradation values may be obtained from the 301A and F test methods. This study provides new information to assess the environmental fate in the risk assessment of MDA. Copyright © 2014 Elsevier Inc. All rights reserved.

Gamma ray detector shield

DOEpatents

Ohlinger, R.D.; Humphrey, H.W.

1985-08-26

A gamma ray detector shield comprised of a rigid, lead, cylindrical-shaped vessel having upper and lower portions with an pneumatically driven, sliding top assembly. Disposed inside the lead shield is a gamma ray scintillation crystal detector. Access to the gamma detector is through the sliding top assembly.

Development of the Carers' Alert Thermometer (CAT) to identify family carers struggling with caring for someone dying at home: a mixed method consensus study.

PubMed

Knighting, Katherine; O'Brien, Mary R; Roe, Brenda; Gandy, Rob; Lloyd-Williams, Mari; Nolan, Mike; Jack, Barbara A

2015-05-03

There is an increasing international policy direction to promote home death for dying patients which will impact on the demands placed on family carers. The early identification of carer needs and appropriate intervention can help avoid crisis situations for the carer and avoidable hospital admissions which are reported to be a global concern. The aim of the study was to explore what professionals and carers of patients with cancer and advanced progressive illness, in their last year of life, find burdensome and to develop an alert system for use by non-specialist staff. A mixed-method, multi-phased, consensus study sequentially utilising qualitative and quantitative data to develop and pilot the Carers' Alert Thermometer (CAT). 245 people (117 carers and 128 professionals) participated in the study across a range of health and social care settings in the North West of England (2011-2014). A number of key domains were identified and prioritised by consensus for inclusion in the CAT. The 8 domains fit within two overarching themes of the reported carer experience; the support needed by the carer to provide care and the support needed for the carer's own health and well-being. The resultant CAT is an evidence-based alert thermometer consisting of 10 questions, guidance on the possible actions for each alert and space for an action plan to be jointly agreed by the assessor and carer. Preliminary piloting of the CAT has shown it to be valued, fit for purpose and it can be administered by a range of personnel. The CAT enables the identification of current and potential future needs so a proactive approach can be taken to supporting the carer as their role develops over time, with a view to enhancing their well-being and preventing avoidable hospital admissions; ultimately supporting patient choice to remain in their own home.

How much psychological distress is experienced at home by patients with palliative care needs in Germany? A cross-sectional study using the Distress Thermometer.

PubMed

Küttner, Stefanie; Wüller, Johannes; Pastrana, Tania

2017-04-01

The aims of the present study were (1) to describe the prevalence of psychosocial distress in palliative care patients living at home and the related factors, and (2) to test implementation of the Distress Thermometer (DT) within a home-based palliative care service. Ours was a 15-month prospective study beginning in September of 2013 in western Germany with consecutive patients cared for by a home care palliative care service. The research was implemented during the first visit by the home care team. Patients were excluded if they were under 18 years of age, mentally or physically unable to complete the assessment questionnaires as judged by their healthcare worker, or unable to understand the German language. During the first encounter, the Distress Thermometer (DT), a Problem List (PL), and a structured questionnaire for evaluation were applied and sociodemographic and medical data collected. A total of 103 patients (response rate = 70%; mean age = 67; female = 54%; married = 67%; oncological condition = 91%; Karnofsky Performance Status [KPS] score 0-40 = 34%, 50-70 = 60%, >80 = 6%) were included. The incidence of distress (DT score ≥4) was 89.3% (mean = 6.3 ± 2.5). No statistical association was found between level of distress and sociodemographic or medical factors. The five most reported problems were "fatigue" (90%), "getting around" (84%), "eating" (63%), "bathing/dressing" (60%), and "sleep" (57%). The number of problems reported correlated with level of distress (ρ = 0.34). The DT was comprehensible, and 80% considered its completion as unremarkable, while 14% found it "relieving." A significant proportion of patients treated at home reported symptoms of distress. The most oft-mentioned problems were physical and emotional in nature. The findings of our study highlight the importance of creating new concepts and structures in order to address the psychosocial needs of patients in home care with palliative needs.

Assessment of androgen receptor agonistic/antagonistic effects on 25 chemicals in household applicants by OECD in vitro stably transfected transcriptional activation assays.

PubMed

Lee, Hee-Seok; Park, Eun-Jung; Han, Songyi; Oh, Gyeong-Yong; Kang, Hui-Seung; Suh, Jin-Hyang; Shin, Min-Ki; Oh, Hyun-Suk; Hwang, Myung-Sil; Moon, Guiim; Koh, Young-Ho; Park, Yooheon; Hong, Jin-Hwan; Koo, Yong Eui

2018-01-01

The aim of this study is to assess the androgen receptor (AR) agonistic/antagonistic effects on various chemicals, which are used in household products including cleaning agents and wetted tissues by in vitro OECD test guideline No. 458 (using AR-EcoScreen™ cell line) and the me-too test method (using 22Rv1cell line), which was adopted as OECD project No. 4.99. All chemicals were not determined as AR agonists. However α-dodecyl-ω-hydroxypoly (oxyethylene) and 3-iodo-2-propynyl butylcarbamate have shown a weak AR antagonistic effects with IC 50 values of 2.18 ± 0.12 and 4.26 ± 0.17 μg/ml via binding affinity to AR in only 22Rv1/mouse mammary tumor virus using AR transcriptional activation assay, because of their different cytotoxicity on each applied cell line. This report firstly provides information about agonistic/antagonistic effects against human AR of various chemicals including surfactants and biocides by OECD in vitro stably transfected transcriptional activation assays. However, further in vivo and human model studies are needed to confirm their adverse effects. Copyright © 2017 Elsevier Ltd. All rights reserved.

PISA for Development Technical Strand A: Enhancement of PISA Cognitive Instruments. OECD Education Working Papers, No. 126

ERIC Educational Resources Information Center

Adams, Ray; Cresswell, John

2016-01-01

The OECD is planning to enhance existing PISA assessment instruments in reading, mathematics and science so that they will be more suitable to the context of developing countries. The main purpose of this paper is to identify the main technical issues associated with this aim. The paper reports detailed analysis of the existing PISA item pool and…

Change Management in the Governance of Schooling: The Rise of Experts, Planners, and Statistics in the Early OECD

ERIC Educational Resources Information Center

Tröhler, Daniel

2014-01-01

Background/Context: Based on archival material, the following paper analyzes the political strategies of the early OECD stakeholders in transforming schooling from a cultural to a technological system and how they were in need of standardizing different existing patterns of thoughts or institutional behaviors in the member countries. The European…

A Tuning-AHELO Conceptual Framework of Expected Desired/Learning Outcomes in Engineering. OECD Education Working Papers, Number 60

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2011

2011-01-01

The OECD Secretariat, at the invitation of the AHELO Group of National Experts, contracted the Tuning Association to undertake initial development work on learning outcomes to be used for valid and reliable assessments of students from diverse institutions and countries. The two disciplines selected for the AEHLO Feasibility Study are engineering…

Wetting characteristics and blood clotting on surfaces of copoly(gamma-Benzyl-L-glutamate, gamma-hydroxyethyl-L-glutamine).

PubMed

Yano, E; Komai, T; Kawasaki, T; Kaifu, K; Atsuta, T; Kubo, Y; Fujiwara, Y

1985-09-01

The film surface of poly(gamma-benzyl-L-glutamate) (PBLG) was modified with 2-aminoethanol to enhance its hydrophilicity. Controlling the reaction conditions of PBLG and 2-aminoethanol, various types of copoly(gamma-benzyl-L-glutamate, gamma-hydroxyethyl-L-glutamine) film surfaces were obtained. Surface free energy (gamma sv), the dispersive component of gamma sv (gamma dsv), the nondispersive component of gamma sv (gamma psv), and the interfacial free energy of polymer surface with water (gamma sw), which were obtained by using the contact angle measurement and calculation method proposed by Andrade et al., were changed remarkably by the aminolysis. The gamma sv value increased after 2 h of aminolysis from 48.2 (PBLG) to 65.3 dyn/cm and gradually increased to around 70 dyn/cm after 12 h reaction. (gamma dsv) and (gamma psv) changed from 31.0 and 17.2 dyn/cm (PBLG) to 26.5 and 44.3 dyn/cm, respectively. These parameters of the material surfaces, modified over 12 h reaction, were found to be similar to those of the surfaces of canine aorta, vein, and human fibrin membrane. Blood clotting times on these polymer surfaces were comparatively longer than on siliconized glass surfaces.

Assessment of the lethal and sublethal effects of 20 environmental chemicals in zebrafish embryos and larvae by using OECD TG 212.

PubMed

Horie, Yoshifumi; Yamagishi, Takahiro; Takahashi, Hiroko; Shintaku, Youko; Iguchi, Taisen; Tatarazako, Norihisa

2017-10-01

Fish embryo toxicity tests are used to assess the lethal and sublethal effects of environmental chemicals in aquatic organisms. Previously, we used a short-term toxicity test published by the Organization for Economic Co-operation and Development (test no. 212: Fish, Short-term Toxicity Test on Embryo and Sac-Fry Stages [OECD TG 212]) to assess the lethal and sublethal effects of aniline and several chlorinated anilines in zebrafish embryos and larvae. To expand upon this previous study, we used OECD TG 212 in zebrafish embryos and larvae to assess the lethal and sublethal effects of 20 additional environmental chemicals that included active pharmaceutical ingredients, pesticides, metals, aromatic compounds or chlorinated anilines. Zebrafish embryos (Danio rerio) were exposed to the test chemicals until 8 days post-fertilization. A delayed lethal effect was induced by 16 of the 20 test chemicals, and a positive correlation was found between heart rate turbulence and mortality. We also found that exposure to the test chemicals at concentrations lower than the lethal concentration induced the sublethal effects of edema, body curvature and absence of swim-bladder inflation. In conclusion, the environmental chemicals assessed in the present study induced both lethal and sublethal effects in zebrafish embryos and larvae, as assessed by using OECD TG 212. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Identification and characterization of novel peroxisome proliferator-activated receptor-gamma (PPAR-gamma) transcriptional variants in pig and human.

PubMed

Omi, T; Brenig, B; Spilar Kramer, S; Iwamoto, S; Stranzinger, G; Neuenschwander, S

2005-04-01

The peroxisome proliferator-activated receptor-gamma (PPAR-gamma) is a member of the steroid/thyroid/retinoid receptor superfamily, and is primarily expressed in fat tissue. To date, two major PPAR-gamma isoforms have been identified in pig, PPAR-gamma1 and PPAR-gamma2. Porcine PPAR-gamma1a consists of two leader exons, designated A1 and A2, followed by six exons containing the open reading frame. Here, we report the isolation and characterization of three novel PPAR-gamma1 transcripts. PPAR-gamma1b is derived from exon A1, with exon A2 spliced out. PPAR-gamma1c and PPAR-gamma1d are derived from the new exon, A', containing exon A2 (gamma1c) or without exon A2 (gamma1d). Based on PCR analysis of PAC clones that included sequences from the 5'-untranslated region of the PPAR-gamma gene, the new A' exon is located between the known exons A1 and A2. We also isolated the human homologue to exon A', as well as the two new PPAR-gamma1c and -gamma1d splice variants, from human adipose tissue. Studies of the expression of porcine PPAR-gamma by real time reverse transcription-polymerase chain reaction analysis show that transcripts derived from exon A1 were not expressed at significantly different levels in visceral fat (lamina subserosa) or subcutaneous fat (back fat, inner and outer layer). In contrast, exon A'-derived transcripts were expressed at progressively higher levels in the inner and outer layers of subcutaneous fat than in visceral fat. The same expression pattern was also observed for PPAR-gamma2. We hypothesize that there are three promoters, which differentially regulate PPAR-gamma1 and PPAR-gamma2 gene expression, depending on the specific localization of the fat tissue.

Terrestrial Gamma-Ray Flashes (TGFs)

NASA Technical Reports Server (NTRS)

Fishman, Gerald J.

2010-01-01

This slide presentation reviews the observation of Terrestrial Gamma Ray Flashes (TGFs) by Gamma-Ray Telescopes. These were: (1) BATSE /Compton Observatory, (2) Solar Spectroscopic Imager, (3) AGILE Gamma-ray Telescope, and (4) Gamma-ray Burst Monitor (GBM) on the Fermi Gamma-ray Space Telescope. It contains charts which display the counts over time, a map or the TGFs observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). and a map showing the latitude and longitude of 85 of the TGFs observed by the Fermi GBM.

40 CFR 174.529 - Bacillus thuringiensis modified Cry1Ab protein as identified under OECD Unique Identifier SYN...

Code of Federal Regulations, 2011 CFR

2011-07-01

... protein as identified under OECD Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement... Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement of a tolerance. Residues of... exempt from the requirement of a tolerance when used as a plant-incorporated protectant in cotton; cotton...

40 CFR 174.529 - Bacillus thuringiensis modified Cry1Ab protein as identified under OECD Unique Identifier SYN...

Code of Federal Regulations, 2013 CFR

2013-07-01

... protein as identified under OECD Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement... Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement of a tolerance. Residues of... exempt from the requirement of a tolerance when used as a plant-incorporated protectant in cotton; cotton...

40 CFR 174.529 - Bacillus thuringiensis modified Cry1Ab protein as identified under OECD Unique Identifier SYN...

Code of Federal Regulations, 2014 CFR

2014-07-01

... protein as identified under OECD Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement... Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement of a tolerance. Residues of... exempt from the requirement of a tolerance when used as a plant-incorporated protectant in cotton; cotton...

40 CFR 174.529 - Bacillus thuringiensis modified Cry1Ab protein as identified under OECD Unique Identifier SYN...

Code of Federal Regulations, 2012 CFR

2012-07-01

... protein as identified under OECD Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement... Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement of a tolerance. Residues of... exempt from the requirement of a tolerance when used as a plant-incorporated protectant in cotton; cotton...

40 CFR 174.529 - Bacillus thuringiensis modified Cry1Ab protein as identified under OECD Unique Identifier SYN...

Code of Federal Regulations, 2010 CFR

2010-07-01

... protein as identified under OECD Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement... Unique Identifier SYN-IR67B-1 in cotton; exemption from the requirement of a tolerance. Residues of... exempt from the requirement of a tolerance when used as a plant-incorporated protectant in cotton; cotton...

Gamma ray camera

DOEpatents

Perez-Mendez, Victor

1997-01-01

A gamma ray camera for detecting rays emanating from a radiation source such as an isotope. The gamma ray camera includes a sensor array formed of a visible light crystal for converting incident gamma rays to a plurality of corresponding visible light photons, and a photosensor array responsive to the visible light photons in order to form an electronic image of the radiation therefrom. The photosensor array is adapted to record an integrated amount of charge proportional to the incident gamma rays closest to it, and includes a transparent metallic layer, photodiode consisting of a p-i-n structure formed on one side of the transparent metallic layer, and comprising an upper p-type layer, an intermediate layer and a lower n-type layer. In the preferred mode, the scintillator crystal is composed essentially of a cesium iodide (CsI) crystal preferably doped with a predetermined amount impurity, and the p-type upper intermediate layers and said n-type layer are essentially composed of hydrogenated amorphous silicon (a-Si:H). The gamma ray camera further includes a collimator interposed between the radiation source and the sensor array, and a readout circuit formed on one side of the photosensor array.

OECD's Brief Self-Report Measure of Educational Psychology's Most Useful Affective Constructs: Cross-Cultural, Psychometric Comparisons across 25 Countries

ERIC Educational Resources Information Center

Marsh, Herbert W.; Hau, Kit-Tai; Artelt, Cordula; Baumert, Jurgen; Peschar, Jules L.

2006-01-01

Through a rigorous process of selecting educational psychology's most useful affective constructs, the Organisation for Economic Co-operation and Development (OECD) constructed the Students' Approaches to Learning (SAL) instrument, which requires only 10 min to measure 14 factors that assess self-regulated learning strategies, self-beliefs,…

Formation of gamma'-Ni3Al via the Peritectoid Reaction: gamma plus beta (+Al2O3) equals gamma'(+Al2O3)

NASA Technical Reports Server (NTRS)

Copland, Evan

2008-01-01

The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8 - 32 at.%Al and temperature range T = 1400 - 1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma'-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3) = gamma + beta (+ Al2O3), at 1640 plus or minus 1 K and a liquid composition of 24.8 plus or minus 0.2 at.%Al (at an unknown oxygen content). The {gamma + beta + Al2O3} phase field is stable over the temperature range 1633 - 1640 K, and gamma'-Ni3Al forms via the peritectiod, gamma + beta (+ Al2O3) = gamma'(+ Al2O3), at 1633 plus or minus 1 K. This behavior is inconsistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma'-Ni3Al phase field.

Gamma-ray astrophysics

NASA Technical Reports Server (NTRS)

Stecker, F. W. (Editor); Trombka, J. I. (Editor)

1973-01-01

Conference papers on gamma ray astrophysics are summarized. Data cover the energy region from about 0.3 MeV to a few hundred GeV and theoretical models of production mechanisms that give rise to both galactic and extragalactic gamma rays.

The Gamma-ray Universe through Fermi

NASA Technical Reports Server (NTRS)

Thompson, David J.

2012-01-01

Gamma rays, the most powerful form of light, reveal extreme conditions in the Universe. The Fermi Gamma-ray Space Telescope and its smaller cousin AGILE have been exploring the gamma-ray sky for several years, enabling a search for powerful transients like gamma-ray bursts, novae, solar flares, and flaring active galactic nuclei, as well as long-term studies including pulsars, binary systems, supernova remnants, and searches for predicted sources of gamma rays such as dark matter annihilation. Some results include a stringent limit on Lorentz invariance derived from a gamma-ray burst, unexpected gamma-ray variability from the Crab Nebula, a huge ga.nuna-ray structure associated with the center of our galaxy, surprising behavior from some gamma-ray binary systems, and a possible constraint on some WIMP models for dark matter.

Bilateral Comparison of Mercury and Gallium Fixed-Point Cells Using Standard Platinum Resistance Thermometer

NASA Astrophysics Data System (ADS)

Bojkovski, J.; Veliki, T.; Zvizdić, D.; Drnovšek, J.

2011-08-01

The objective of project EURAMET 1127 (Bilateral comparison of triple point of mercury and melting point of gallium) in the field of thermometry is to compare realization of a triple point of mercury (-38.8344 °C) and melting point of gallium (29.7646 °C) between the Slovenian national laboratory MIRS/UL-FE/LMK and the Croatian national laboratory HMI/FSB-LPM using a long-stem 25 Ω standard platinum resistance thermometer (SPRT). MIRS/UL/FE-LMK participated in a number of intercomparisons on the level of EURAMET. On the other hand, the HMI/LPM-FSB laboratory recently acquired new fixed-point cells which had to be evaluated in the process of intercomparisons. A quartz-sheathed SPRT has been selected and calibrated at HMI/LPM-FSB at the triple point of mercury, the melting point of gallium, and the water triple point. A second set of measurements was made at MIRS/UL/FE-LMK. After its return, the SPRT was again recalibrated at HMI/LPM-FSB. In the comparison, the W value of the SPRT has been used. Results of the bilateral intercomparison confirmed that the new gallium cell of the HMI/LPM-FSB has a value that is within uncertainty limits of both laboratories that participated in the exercise, while the mercury cell experienced problems. After further research, a small leakage in the mercury fixed-point cell has been found.

Topics in gamma ray astronomy

NASA Technical Reports Server (NTRS)

Ramaty, R.; Lingenfelter, R. E.

1986-01-01

Observations of gamma rays from solar flares, gamma ray bursts, the Galactic center, galactic nucleosynthesis, SS433, and Cygnus X-3, and their effects on astrophysical problems are discussed. It is observed that gamma ray spectra from solar flares are applicable to the study of particle acceleration and confinement and the determination of chemical abundances in the solar atmosphere. The gamma ray lines from the compact galactic object SS433 are utilized to examine the acceleration of jets, and analysis of the gamma ray lines of Cygnus X-3 reveal that particles can be accelerated in compact sources to ultrahigh energies.