Sample records for gantry cranes top

  1. 29 CFR 1926.1438 - Overhead & gantry cranes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Overhead & gantry cranes. 1926.1438 Section 1926.1438 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1438 Overhead & gantry cranes. (a) Permanently installed overhead and gantry cranes. The requirements of § 1910...

  2. 78 FR 68477 - Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ...] Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of... requirements specified in the Standard on Overhead and Gantry Cranes (29 CFR 1910.179). DATES: Comments must be... information (29 U.S.C. 657). The paperwork provisions of the Standard on Overhead and Gantry Cranes specify...

  3. 75 FR 44288 - Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-28

    ...] Overhead and Gantry Cranes; Extension of the Office of Management and Budget's (OMB) Approval of... requirements specified in the Standard on Overhead and Gantry Cranes (29 CFR 1910.179). DATES: Comments must be... requirements for: Marking the rated load of cranes; preparing certification records to verify the inspection of...

  4. Modelling safety of gantry crane operations using Petri nets.

    PubMed

    Singh, Karmveer; Raj, Navneet; Sahu, S K; Behera, R K; Sarkar, Sobhan; Maiti, J

    2017-03-01

    Being a powerful tool in modelling industrial and service operations, Petri net (PN) has been extremely used in different domains, but its application in safety study is limited. In this study, we model the gantry crane operations used for industrial activities using generalized stochastic PNs. The complete cycle of operations of the gantry crane is split into three parts namely inspection and loading, movement of load, and unloading of load. PN models are developed for all three parts and the whole system as well. The developed PN models have captured the safety issues through reachability tree. The hazardous states are identified and how they ultimately lead to some unwanted accidents is demonstrated. The possibility of falling of load and failure of hook, sling, attachment and hoist rope are identified. Possible suggestions based on the study are presented for redesign of the system. For example, mechanical stoppage of operations in case of loosely connected load, and warning system for use of wrong buttons is tested using modified models.

  5. 63. Photograph of line drawing. SITE PLAN OF GANTRY CRANE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    63. Photograph of line drawing. SITE PLAN OF GANTRY CRANE TRACKS AND 20,000 POUND MOTOR TEST AND LAUNCH FACILITY ('BLAST PIT'), OCTOBER 1946 - White Sands Missile Range, V-2 Rocket Facilities, Near Headquarters Area, White Sands, Dona Ana County, NM

  6. The control system of synchronous movement of the gantry crane supports

    NASA Astrophysics Data System (ADS)

    Odnokopylov, I. G.; Gneushev, V. V.; Galtseva, O. V.; Natalinova, N. M.; Li, J.; Serebryakov, D. I.

    2017-01-01

    The paper presents study findings on synchronization of the gantry crane support movement. Asynchrony moving speed bearings may lead to an emergency mode at the natural rate of deformed metal structure alignment. The use of separate control of asynchronous motors with the vector control method allows synchronizing the movement speed of crane supports and achieving a balance between the motors. Simulation results of various control systems are described. Recommendations regarding the system further application are given.

  7. 21. V2 GANTRY, LAUNCH COMPLEX 33: VIEW OF CRANE WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. V-2 GANTRY, LAUNCH COMPLEX 33: VIEW OF CRANE WITH BLAST PIT OF 20,000 POUND MOTOR TEST AND LAUNCH FACILITY, IN FOREGROUND, LOOKING WEST - White Sands Missile Range, V-2 Rocket Facilities, Near Headquarters Area, White Sands, Dona Ana County, NM

  8. Motion control of a gantry crane with a container

    NASA Astrophysics Data System (ADS)

    Shugailo, T. S.; Yushkov, M. P.

    2018-05-01

    The transportation of a container by a gantry crane in a given time from one point of space to another is considered. The system is at rest at the end of the motion. A maximum admissible speed is taken into account. The control force is found using either the Pontryagin maximum principle or the generalized Gauss principle. The advantages of the second method over the first one is demonstrated.

  9. Dynamic modelling of a double-pendulum gantry crane system incorporating payload

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ismail, R. M. T. Raja; Ahmad, M. A.; Ramli, M. S.

    The natural sway of crane payloads is detrimental to safe and efficient operation. Under certain conditions, the problem is complicated when the payloads create a double pendulum effect. This paper presents dynamic modelling of a double-pendulum gantry crane system based on closed-form equations of motion. The Lagrangian method is used to derive the dynamic model of the system. A dynamic model of the system incorporating payload is developed and the effects of payload on the response of the system are discussed. Extensive results that validate the theoretical derivation are presented in the time and frequency domains.

  10. ASME Nuclear Crane Standards for Enhanced Crane Safety and Increased Profit

    NASA Astrophysics Data System (ADS)

    Parkhurst, Stephen N.

    2000-01-01

    The ASME NOG-1 standard, 'Rules for Construction of Overhead and Gantry Cranes', covers top running cranes for nuclear facilities; with the ASME NUM-1 standard, 'Rules for Construction of Cranes, Monorails, and Hoists', covering the single girder, underhung, wall and jib cranes, as well as the monorails and hoists. These two ASME nuclear crane standards provide criteria for designing, inspecting and testing overhead handling equipment with enhanced safety to meet the 'defense-in-depth' approach of the United States Nuclear Regulatory Commission (USNRC) documents NUREG 0554 and NUREG 0612. In addition to providing designs for enhanced safety, the ASME nuclear crane standards provide a basis for purchasing overhead handling equipment with standard safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities. The ASME NOG-1 and ASME NUM-1 standards not only provide enhanced safety for handling a critical load, but also increase profit by minimizing the possibility of load drops, by reducing cumbersome operating restrictions, and by providing the foundation for a sound licensing position. The ASME nuclear crane standards can also increase profit by providing the designs and information to help ensure that the right standard equipment is purchased. Additionally, the ASME nuclear crane standards can increase profit by providing designs and information to help address current issues, such as the qualification of nuclear plant cranes for making 'planned engineered lifts' for steam generator replacement and decommissioning.

  11. Rail Mounted Gantry Crane Scheduling Optimization in Railway Container Terminal Based on Hybrid Handling Mode

    PubMed Central

    Zhu, Xiaoning

    2014-01-01

    Rail mounted gantry crane (RMGC) scheduling is important in reducing makespan of handling operation and improving container handling efficiency. In this paper, we present an RMGC scheduling optimization model, whose objective is to determine an optimization handling sequence in order to minimize RMGC idle load time in handling tasks. An ant colony optimization is proposed to obtain near optimal solutions. Computational experiments on a specific railway container terminal are conducted to illustrate the proposed model and solution algorithm. The results show that the proposed method is effective in reducing the idle load time of RMGC. PMID:25538768

  12. Operator control systems and methods for swing-free gantry-style cranes

    DOEpatents

    Feddema, J.T.; Petterson, B.J.; Robinett, R.D. III

    1998-07-28

    A system and method are disclosed for eliminating swing motions in gantry-style cranes while subject to operator control. The present invention comprises an infinite impulse response (IIR) filter and a proportional-integral (PI) feedback controller. The IIR filter receives input signals (commanded velocity or acceleration) from an operator input device and transforms them into output signals in such a fashion that the resulting motion is swing free (i.e., end-point swinging prevented). The parameters of the IIR filter are updated in real time using measurements from a hoist cable length encoder. The PI feedback controller compensates for modeling errors and external disturbances, such as wind or perturbations caused by collision with objects. The PI feedback controller operates on cable swing angle measurements provided by a cable angle sensor. The present invention adjusts acceleration and deceleration to eliminate oscillations. An especially important feature of the present invention is that it compensates for variable-length cable motions from multiple cables attached to a suspended payload. 10 figs.

  13. Operator control systems and methods for swing-free gantry-style cranes

    DOEpatents

    Feddema, John T.; Petterson, Ben J.; Robinett, III, Rush D.

    1998-01-01

    A system and method for eliminating swing motions in gantry-style cranes while subject to operator control is presented. The present invention comprises an infinite impulse response ("IIR") filter and a proportional-integral ("PI") feedback controller (50). The IIR filter receives input signals (46) (commanded velocity or acceleration) from an operator input device (45) and transforms them into output signals (47) in such a fashion that the resulting motion is swing free (i.e., end-point swinging prevented). The parameters of the IIR filter are updated in real time using measurements from a hoist cable length encoder (25). The PI feedback controller compensates for modeling errors and external disturbances, such as wind or perturbations caused by collision with objects. The PI feedback controller operates on cable swing angle measurements provided by a cable angle sensor (27). The present invention adjusts acceleration and deceleration to eliminate oscillations. An especially important feature of the present invention is that it compensates for variable-length cable motions from multiple cables attached to a suspended payload.

  14. 29 CFR 1910.179 - Overhead and gantry cranes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... adequately guarded or isolated. (40) Fail-safe means a provision designed to automatically stop or safely... shall be capable of maintaining safe lowering speeds of rated loads. (ii) The control braking means... the crane operator. (viii) Automatic cranes shall be so designed that all motions shall fail-safe if...

  15. Crane 55 at Drydock No. 2. View includes entire bone. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Crane 55 at Drydock No. 2. View includes entire bone. Building 43 is in background - Puget Sound Naval Shipyard, Portal Gantry Crane No. 55, Central Industrial Area, Farragut Avenue, Bremerton, Kitsap County, WA

  16. Dynamic analysis and control PID path of a model type gantry crane

    NASA Astrophysics Data System (ADS)

    Ospina-Henao, P. A.; López-Suspes, Framsol

    2017-06-01

    This paper presents an alternate form for the dynamic modelling of a mechanical system that simulates in real life a gantry crane type, using Euler’s classical mechanics and Lagrange formalism, which allows find the equations of motion that our model describe. Moreover, it has a basic model design system using the SolidWorks software, based on the material and dimensions of the model provides some physical variables necessary for modelling. In order to verify the theoretical results obtained, a contrast was made between solutions obtained by simulation in SimMechanics-Matlab and Euler-Lagrange equations system, has been solved through Matlab libraries for solving equation’s systems of the type and order obtained. The force is determined, but not as exerted by the spring, as this will be the control variable. The objective is to bring the mass of the pendulum from one point to another with a specified distance without the oscillation from it, so that, the answer is overdamped. This article includes an analysis of PID control in which the equations of motion of Euler-Lagrange are rewritten in the state space, once there, they were implemented in Simulink to get the natural response of the system to a step input in F and then draw the desired trajectories.

  17. 8. VIEW OF GANTRY ROOM, POWERHOUSE, SHOWING 25TON WHITING MOVABLE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. VIEW OF GANTRY ROOM, POWERHOUSE, SHOWING 25-TON WHITING MOVABLE CRANE AND BRIDGE - Nine Mile Hydroelectric Development, Powerhouse, State Highway 291 along Spokane River, Nine Mile Falls, Spokane County, WA

  18. Proposed technique for vertical alignment of a crane's cable

    NASA Technical Reports Server (NTRS)

    Gera, J., Jr.

    1969-01-01

    Proposed vertical alignment technique senses the attitude of a cranes cable and displays any deviation from the vertical. The system consists of a detector assembly fixed to the boom and a display scope located in the cabin. It has potential application with either fixed-boom cranes or gantries.

  19. Motion control of nonlinear gantry crane system via priority-based fitness scheme in firefly algorithm

    NASA Astrophysics Data System (ADS)

    Jaafar, Hazriq Izzuan; Latif, Norfaneysa Abd; Kassim, Anuar Mohamed; Abidin, Amar Faiz Zainal; Hussien, Sharifah Yuslinda Syed; Aras, Mohd Shahrieel Mohd

    2015-05-01

    Advanced manufacturing technology made Gantry Crane System (GCS) is one of the suitable heavy machinery transporters and frequently employed in handling with huge materials. The interconnection of trolley movement and payload oscillation has a technical impact which needs to be considered. Once the trolley moves to the desired position with high speed, this will induce undesirable's payload oscillation. This frequent unavoidable load swing causes an efficiency drop, load damages and even accidents. In this paper, a new control strategy of Firefly Algorithm (FA) will be developed to obtain five optimal controller parameters (PID and PD) via Priority-based Fitness Scheme (PFS). Combinations of these five parameters are utilized for controlling trolley movement and minimizing the angle of payload oscillation. This PFS is prioritized based on steady-state error (SSE), overshoot (OS) and settling time (Ts) according to the needs and circumstances. Lagrange equation will be chosen for modeling and simulation will be conducted by using related software. Simulation results show that the proposed control strategy is efficient to control the trolley movement to the desired position and minimize the angle of payload oscillation.

  20. Designing Crane Controls with Applied Mechanical and Electrical Safety Features

    NASA Technical Reports Server (NTRS)

    Lytle, Bradford P.; Walczak, Thomas A.

    2002-01-01

    The use of overhead traveling bridge cranes in many varied applications is common practice. In particular, the use of cranes in the nuclear, military, commercial, aerospace, and other industries can involve safety critical situations. Considerations for Human Injury or Casualty, Loss of Assets, Endangering the Environment, or Economic Reduction must be addressed. Traditionally, in order to achieve additional safety in these applications, mechanical systems have been augmented with a variety of devices. These devices assure that a mechanical component failure shall reduce the risk of a catastrophic loss of the correct and/or safe load carrying capability. ASME NOG-1-1998, (Rules for Construction of Overhead and Gantry Cranes, Top Running Bridge, and Multiple Girder), provides design standards for cranes in safety critical areas. Over and above the minimum safety requirements of todays design standards, users struggle with obtaining a higher degree of reliability through more precise functional specifications while attempting to provide "smart" safety systems. Electrical control systems also may be equipped with protective devices similar to the mechanical design features. Demands for improvement of the cranes "control system" is often recognized, but difficult to quantify for this traditionally "mechanically" oriented market. Finite details for each operation must be examined and understood. As an example, load drift (or small motions) at close tolerances can be unacceptable (and considered critical). To meet these high functional demands encoders and other devices are independently added to control systems to provide motion and velocity feedback to the control drive. This paper will examine the implementation of Programmable Electronic Systems (PES). PES is a term this paper will use to describe any control system utilizing any programmable electronic device such as Programmable Logic Controllers (PLC), or an Adjustable Frequency Drive (AID) 'smart' programmable

  1. Rotating shielded crane system

    DOEpatents

    Commander, John C.

    1988-01-01

    A rotating, radiation shielded crane system for use in a high radiation test cell, comprises a radiation shielding wall, a cylindrical ceiling made of radiation shielding material and a rotatable crane disposed above the ceiling. The ceiling rests on an annular ledge intergrally attached to the inner surface of the shielding wall. Removable plugs in the ceiling provide access for the crane from the top of the ceiling into the test cell. A seal is provided at the interface between the inner surface of the shielding wall and the ceiling.

  2. NASA safety standard for lifting devices and equipment

    NASA Astrophysics Data System (ADS)

    1990-09-01

    NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

  3. NASA safety standard for lifting devices and equipment

    NASA Technical Reports Server (NTRS)

    1990-01-01

    NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

  4. FOUNDRY LANDSCAPE LOOKING WESTNORTHWEST FROM MALLEABLE STOCK YARD CRANE, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FOUNDRY LANDSCAPE LOOKING WEST-NORTHWEST FROM MALLEABLE STOCK YARD CRANE, SHOWING CRANE MOTOR AND MALLEABLE CUPOLAS WITH OPEN TOPS AND EMISSION RECOVERY DUCTS. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  5. View southwest of 350ton crane, showing one of four castings ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View southwest of 350-ton crane, showing one of four castings which support a stationary, tapered steel girder structure called a "tower". This tower is located within an outer rotating framework designated as the "pintle" of the 350-ton crane. The whole crane pivots around bearing at the top of this tapered support tower. - Naval Base Philadelphia-Philadelphia Naval Shipyard, 350-Ton Hammerhead Crane, League Island, Philadelphia, Philadelphia County, PA

  6. Achromatic and uncoupled medical gantry

    DOEpatents

    Tsoupas, Nicholaos [Center Moriches, NY; Kayran, Dmitry [Rocky Point, NY; Litvinenko, Vladimir [Mt. Sinai, NY; MacKay, William W [Wading River, NY

    2011-11-22

    A medical gantry that focus the beam from the beginning of the gantry to the exit of the gantry independent of the rotation angle of the gantry by keeping the beam achromatic and uncoupled, thus, avoiding the use of collimators or rotators, or additional equipment to control the beam divergence, which may cause beam intensity loss or additional time in irradiation of the patient, or disadvantageously increase the overall gantry size inapplicable for the use in the medical treatment facility.

  7. View of LADEE's Gantry!

    NASA Image and Video Library

    2013-09-07

    This image shows an evening view gantry at Pad 0B at the Mid-Atlantic Regional Spaceport, at NASA's Wallops Flight Facility in Wallops Island, Va., on Sept. 4, 2013. In this photograph, the gantry surrounds the Minotaur V rocket that will launch NASA LADEE. The gantry is now removed and the Minotaur is getting ready to launch LADEE at 11:27 p.m. EDT tonight. Image credit: NASA Wallops/Patrick Black

  8. MA-9 ASTRONAUT COOPER LOOKS OVER MERCURY SPACECRAFT FAITH 7 FROM INSIDE LC 14 GANTRY

    NASA Technical Reports Server (NTRS)

    1963-01-01

    Pilot and spacecraft - Astronaut L. Gordon Cooper, wearing his Mercury pressure suit, looks over the spacecraft which he named ''Faith 7'' at the top of the Pad 14 gantry at Cape Canaveral. Cooper is prime pilot for the MA-9 mission.

  9. Preparation for Retrievals from Sellafield Legacy Ponds Installation of the Gantry Refurbishment System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ellison, M.

    2008-07-01

    Retrieval of sludge and fuel from the First Generation Magnox Fuel Storage Pond, and its safe long term storage is one of the NDA's top priorities in the UK clean up programme. The plant is currently undergoing a series of major modifications in preparation for the retrievals operations. The most visible example of these modifications is the Gantry Refurbishment System (GRS), a major work platform which has recently been lifted onto the pond long travel girders used by the Skip Handler. This paper describes the design, manufacture, works test, and site installation of this major piece of equipment. The installationmore » lift, involving the use of an 800Te crane was one of the largest lifts undertaken at Sellafield. The GRS is a mobile platform structure which is designed to be pushed or pulled along the long travel girders by the Skip Handler. Its principle function is to provide a safe and shielded working platform from which to undertake refurbishment of the Skip Handler long travel girders and support structure. The potential hazards and consequences resulting from the modification were fully understood and controls were put in place to ensure that the risk of carrying out the work was as low as reasonably practicable. The work was authorised by the NII, Sellafield Nuclear Safety Committee and an independent readiness review panel. Despite less than perfect weather in the run up to the lift, the GRS was successfully and safely lifted onto the pond on 18 October 2006, the culmination of three years of planning, engineering and construction. (authors)« less

  10. Gantry for medical particle therapy facility

    DOEpatents

    Trbojevic, Dejan

    2013-04-23

    A particle therapy gantry for delivering a particle beam to a patient includes a beam tube having a curvature defining a particle beam path and a plurality of superconducting, variable field magnets sequentially arranged along the beam tube for guiding the particle beam along the particle path. In a method for delivering a particle beam to a patient through a gantry, a particle beam is guided by a plurality of variable field magnets sequentially arranged along a beam tube of the gantry and the beam is alternately focused and defocused with alternately arranged focusing and defocusing variable field magnets.

  11. Gantry for medical particle therapy facility

    DOEpatents

    Trbojevic, Dejan [Wading River, NY

    2012-05-08

    A particle therapy gantry for delivering a particle beam to a patient includes a beam tube having a curvature defining a particle beam path and a plurality of fixed field magnets sequentially arranged along the beam tube for guiding the particle beam along the particle path. In a method for delivering a particle beam to a patient through a gantry, a particle beam is guided by a plurality of fixed field magnets sequentially arranged along a beam tube of the gantry and the beam is alternately focused and defocused with alternately arranged focusing and defocusing fixed field magnets.

  12. Lunar crane system

    NASA Technical Reports Server (NTRS)

    Mikulas, Martin M., Jr.

    1991-01-01

    In many lunar construction scenarios, mechanical cranes in some form will be indispensible in moving large masses around with various degrees of fine positioning. While thorough experience exists in the use of terrestrial cranes new thinking is required about the design of cranes to be used in extraterrestrial construction. The primary driving force for this new thinking is the need to automate the crane system so that space cranes can be operated as telerobotic machines with a large number of automatic capabilities. This is true because in extraterrestrial construction human resources will need to be critically rationed. The design problems of mechanisms and control systems for a lunar crane must deal with at least two areas of performance. First, the automated crane must be capable of maneuvering a large mass, so that when the mass arrives at the target position there are only small vibrations. Secondly, any residue vibrations must be automatically damped out and a fine positioning must be achieved. For extraterrestrial use there are additional challenges to a crane design - for example, to design a crane system so that it can be transformed for other construction uses. This initial project in crane design does not address such additional issues, although they may be the subject of future CSC research. To date the Center has designed and analyzed many mechanisms. The fundamental problem of trade-offs between passively stabilizing the load and actively controlling the load by actuators was extensively studied. The capability of 3D dynamics modeling now exists for such studies. A scaled model of a lunar crane was set up and it has been most fruitful in providing basic understanding of lunar cranes. Due to an interesting scaling match-up, this scaled model exhibits the load vibration frequencies one would expect in the real lunar case. Using the analytical results achieved to date, a laboratory crane system is now being developed as a test bed for verifying a wide

  13. 84. GRINDING ROOM, LOOKING EAST. NOTE OVERHEAD BRIDGE CRANE RIDING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    84. GRINDING ROOM, LOOKING EAST. NOTE OVERHEAD BRIDGE CRANE RIDING ON STEEL RAILS SUPPORTED BY WOODEN BEAMS AND CYCLONE CLASSIFIER IN CENTER. AT RIGHT IS TOP PORTION OF FLASH FLOTATION CELL. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  14. Coccidia of whooping cranes

    USGS Publications Warehouse

    Forrester, Donald J.; Carpenter, J.W.; Blankinship, D.R.

    1978-01-01

    Coccidial oocysts were observed in 6 of 19 fecal samples from free-ranging whooping cranes (Grus americana) and 4 of 16 samples from captive whooping cranes. Eimeria gruis occurred in four free-ranging whooping cranes and E. reichenowi in two free-ranging and two captive whooping cranes. Fecal samples from two captive cranes contained oocysts of Isospora lacazei which was considered a spurious parasite. Oocysts of both species of Eimeria were prevalent in fecal samples collected from three free-ranging Canadian sandhill cranes (G. canadensis rowani) from whooping crane wintering grounds in Texas. These coccidia were prevalent also in fecal samples from 14 sandhill cranes (of 4 subspecies) maintained in captivity at the Patuxent Wildlife Research Center in Maryland.

  15. An isocenter estimation tool for proton gantry alignment

    NASA Astrophysics Data System (ADS)

    Hansen, Peter; Hu, Dongming

    2017-12-01

    A novel tool has been developed to automate the process of locating the isocenter, center of rotation, and sphere of confusion of a proton therapy gantry. The tool uses a Radian laser tracker to estimate how the coordinate frame of the front-end beam-line components changes as the gantry rotates. The coordinate frames serve as an empirical model of gantry flexing. Using this model, the alignment of the front and back-end beam-line components can be chosen to minimize the sphere of confusion, improving the overall beam positioning accuracy of the gantry. This alignment can be performed without the beam active, improving the efficiency of installing new systems at customer sites.

  16. VIEW OF PDP TANK TOP, LEVEL 0’, WITH LTR TANK ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF PDP TANK TOP, LEVEL 0’, WITH LTR TANK TOP ON LEFT, LOOKING NORTHEAST. CRANE AND VERTICAL HOISTING ELEMENTS AT TOP - Physics Assembly Laboratory, Area A/M, Savannah River Site, Aiken, Aiken County, SC

  17. Automated gantry-type stitching system

    NASA Technical Reports Server (NTRS)

    Thrash, Patrick J. (Inventor); Miller, Jeffrey L. (Inventor); Pallas, Kenneth G. (Inventor); Trank, Robert C. (Inventor); Fox, Rhoda (Inventor); Korte, Mike (Inventor); Codos, Richard (Inventor); Korolev, Aleksandr (Inventor); Collan, William (Inventor)

    1999-01-01

    A stitching system includes a gantry that is movable along a material support table. Mounted to the gantry are a plurality of stitching heads and bobbins. The stitching heads are individually controllable in a z-direction, and the bobbins are individually controllable in the z-direction. Each stitching head is paired with a bobbin. Each pair of stitching heads and the bobbins is controlled synchronously in the z-direction. The stitching system is well-suited for stitching preforms of aircraft wing covers and other preforms having variable thickness and compound, contoured three-dimensional surfaces.

  18. Overhead Crane Computer Model

    NASA Astrophysics Data System (ADS)

    Enin, S. S.; Omelchenko, E. Y.; Fomin, N. V.; Beliy, A. V.

    2018-03-01

    The paper has a description of a computer model of an overhead crane system. The designed overhead crane system consists of hoisting, trolley and crane mechanisms as well as a payload two-axis system. With the help of the differential equation of specified mechanisms movement derived through Lagrange equation of the II kind, it is possible to build an overhead crane computer model. The computer model was obtained using Matlab software. Transients of coordinate, linear speed and motor torque of trolley and crane mechanism systems were simulated. In addition, transients of payload swaying were obtained with respect to the vertical axis. A trajectory of the trolley mechanism with simultaneous operation with the crane mechanism is represented in the paper as well as a two-axis trajectory of payload. The designed computer model of an overhead crane is a great means for studying positioning control and anti-sway control systems.

  19. Allozyme evidence for crane systematics and polymorphisms within populations of Sandhill, Sarus, Siberian and Whooping Cranes

    USGS Publications Warehouse

    Dessauer, H.C.; Gee, G.F.; Rogers, J.S.

    1992-01-01

    Electrophoretic analysis of proteins yielded evidence on the relationships of species of cranes and on genetic diversity within populations of some species. Diversity within the Greater Sandhill crane and a Florida population of the Florida Sandhill crane was similar to that of most other vertebrates, but diversity was low in the Mississippi Sandhill crane, in the Okefenokee population of the Florida Sandhill crane, and within the Siberian and Sarus cranes. Diversity was surprisingly high among whooping cranes, whose number dropped to less than 25 early in this century. Phylogenetic analysis, using both character state and distance algorithms, yielded highly concordant trees for the 15 species. The African crowned cranes (Balearica) were widely divergent from all other cranes. Species of Anthropoides, Bugeranus, and Grus clustered closely but sorted into two lineages: a Whooper Group consisted of the whooping, common, hooded, black-necked, white-naped, and red-crowned cranes of genus Grus; and a Sandhill Group included the Sandhill, Siberian, Sarus, and Brolga cranes of genus Grus, the wattled crane of genus Bugeranus, and the Demoiselle and blue cranes of genus Anthropoides.

  20. Recent progress of a superconducting rotating-gantry for carbon-ion radiotherapy

    NASA Astrophysics Data System (ADS)

    Iwata, Y.; Fujimoto, T.; Matsuba, S.; Fujita, T.; Sato, S.; Furukawa, T.; Hara, Y.; Mizushima, K.; Saraya, Y.; Tansho, R.; Saotome, N.; Shirai, T.; Noda, K.

    2017-09-01

    A superconducting rotating-gantry for carbon-ion radiotherapy was developed. This isocentric rotating gantry can transport carbon ions having the maximum kinetic energy of E = 430 MeV/u to an isocenter with irradiation angles of over ±180°, and is further capable of performing three-dimensional raster-scanning irradiation. By using combined-function superconducting magnets, we could design a compact rotating gantry for carbon-ion radiotherapy. Construction of the gantry structure began since early 2014, and the installation of the entire gantry system to the Heavy Ion Medical Accelerator in Chiba (HIMAC) complex was completed by the end of September, 2015. Beam tuning subsequently began since October, 2015, and carbon ions, as accelerated by the HIMAC upper synchrotron, having kinetic energies of between E = 430-48 MeV/u were successfully transported with the rotating gantry to the isocenter. The size and shape of the beam spots at the isocenter is being tuned over various combinations of the beam energies and the gantry angle. We will present the recent progress as well as the current status of the superconducting rotating-gantry.

  1. 46 CFR 108.601 - Crane design.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST... Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed in accordance with the American Petroleum Institute Specification for Offshore Cranes, API Spec. 2C, Second...

  2. 46 CFR 108.601 - Crane design.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST... Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed in accordance with the American Petroleum Institute Specification for Offshore Cranes, API Spec. 2C, Second...

  3. 77 FR 67568 - Regulated Navigation Area; East River, Flushing and Gowanus Bays, and Red Hook and Buttermilk...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-13

    ... necessitate that all mariners navigate at a safe speed within the RNA, as the barge and gantry crane and.... SUMMARY: The Coast Guard is temporarily establishing a regulated navigation area (RNA) comprising all... prohibit vessel traffic within the RNA to accommodate the load-out and transit of four gantry cranes that...

  4. Cryopreservation of crane semen

    USGS Publications Warehouse

    Gee, G.F.; Harris, James

    1991-01-01

    The method for the cryopreservation of crane semen at Patuxent Wildlife Research Center is described in detail. Cryopreservation is useful for the long-term storage of crane semen and for specialized propagation needs. A 50% fertility rate from most sandhill cranes, Grus canadensis, inseminated with frozen-thawed semen can be expected. Additional research should improve the fertility rate and determine how applicable the technique is to other crane species.

  5. 46 CFR 108.601 - Crane design.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed in accordance with the American Petroleum...

  6. 46 CFR 108.601 - Crane design.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Crane design. 108.601 Section 108.601 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Cranes Cranes § 108.601 Crane design. (a) Each crane and crane foundation on a unit must be designed in accordance with the American Petroleum...

  7. Crane reproductive physiology and conservation

    USGS Publications Warehouse

    Gee, G.F.

    1983-01-01

    Some unique features of crane reproduction, management, and conservation are described. Because cranes are sexually monomorphic, sexing is difficult and must be accomplished using behavior, laparoscopy, cloacal examination, genetic techniques, or fecal steroid analysis. Although husbandry techniques for cranes are similar to those used with other nondomestic birds, a number of basic characteristics, such as extreme aggressiveness, imprinting by the crane chick on man, a delayed molt in the immature crane, delayed sexual maturity, and infertility, pose special problems for the propagator. Artificial insemination is a practical solution to crane infertility. Vigorous captive management and propagation efforts must become increasingly important if several endangered crane species are to survive the continuing decline in wild populations. The ultimate goal is the restoration of suitable habitat and sustainable native populations.

  8. 46 CFR 126.130 - Cranes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Cranes. 126.130 Section 126.130 Shipping COAST GUARD... § 126.130 Cranes. (a) Except as provided by paragraph (b) of this section, cranes, if installed, must... chapter. (b) The manufacturer of a crane may have tests and inspections conducted in compliance with § 107...

  9. 46 CFR 126.130 - Cranes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cranes. 126.130 Section 126.130 Shipping COAST GUARD... § 126.130 Cranes. (a) Except as provided by paragraph (b) of this section, cranes, if installed, must... chapter. (b) The manufacturer of a crane may have tests and inspections conducted in compliance with § 107...

  10. Emittance matching of a slow extracted beam for a rotating gantry

    NASA Astrophysics Data System (ADS)

    Fujimoto, T.; Iwata, Y.; Matsuba, S.; Fujita, T.; Sato, S.; Shirai, T.; Noda, K.

    2017-09-01

    The introduction of a heavy-ion rotating gantry is in progress at the Heavy Ion Medical Accelerator in Chiba (HIMAC) for realizing high-precision cancer therapy using heavy ions. A scanning irradiation method will be applied to this gantry course with 48-430 MeV/u beam energy. In the rotating gantry, the horizontal and vertical beam parameters are coupled by its rotation. To maintain a circular spot shape at the isocenter irrespective of the gantry angle, achieving symmetric phase space distribution of the horizontal and vertical beam at the entrance of the rotating gantry is necessary. Therefore, compensating the horizontal and vertical emittance is necessary. We consider using a thin scatterer method to compensate the emittance. After considering the optical design for emittance matching, the scatterer device is located in the high-energy beam transport line. In the beam commissioning, we confirm that the symmetrical spot shape is obtained at the isocenter without depending on the gantry angle.

  11. Evaluation of the enteric microflora of captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis).

    PubMed

    Hoar, Bryanne M; Whiteside, Douglas P; Ward, Linda; Douglas Inglis, G; Morck, Douglas W

    2007-03-01

    The enteric flora of captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis) has not been well described, despite its potential importance in the understanding of both the normal condition of the intestinal physiology of these animals and the altered colonization within disease states in these birds. Nineteen whooping cranes and 23 sandhill cranes housed currently at the Calgary Zoo or its affiliated Devonian Wildlife Conservation Centre (DWCC) in Calgary, Alberta were sampled from October 2004-February 2005 by collecting aerobic and anaerobic cloacal swabs from each bird. There were seven major groupings of bacteria isolated from both species of crane. Gram-positive cocci, coliforms, and gram-negative bacilli were the most prevalent types of bacteria isolated for both crane species, with Escherichia coli, Enterococcus faecalis, and Streptococcus Group D, not Enterococcus the bacterial species isolated most commonly. There was a significant difference in the average number of isolates per individual between the two crane species but no differences between age or gender categories within crane species. Campylobacter sp. were isolated from five whooping cranes. The potential zoonotic pathogen Campylobacter jejuni was isolated from one whooping crane and C. upsaliensis was isolated from a second. Three other isolates were unspeciated members of the Campylobacter genus and likely belong to a species undescribed previously. The evaluation of the enteric cloacal flora of whooping cranes and sandhill cranes illustrates that differences exist between these two closely related crane species, and highlights the potential implications these differences may have for current practices involving captive wildlife. Zoo Biol 0:1-13, 2007. (c) 2007 Wiley-Liss, Inc.

  12. Beam commissioning of a superconducting rotating-gantry for carbon-ion radiotherapy

    NASA Astrophysics Data System (ADS)

    Iwata, Y.; Fujimoto, T.; Matsuba, S.; Fujita, T.; Sato, S.; Furukawa, T.; Hara, Y.; Mizushima, K.; Saraya, Y.; Tansho, R.; Saotome, N.; Shirai, T.; Noda, K.

    2016-10-01

    A superconducting rotating-gantry for carbon-ion radiotherapy was developed. This isocentric gantry can transport carbon ions having kinetic energies of between E=430 and 48 MeV/u to an isocenter over an angle of ±180°, and is further capable of performing three-dimensional raster-scanning irradiation. Construction of the entire rotating-gantry system was completed by the end of September 2015. Prior to beam commissioning, phase-space distributions of extracted carbon beams from the synchrotron were deduced by using an empirical method. In this method, phase-space distributions at the extraction channel of the synchrotron were modeled with 8 parameters, and the best parameters were determined so as to minimize a difference between the calculated and measured beam profiles by using a simplex method. Based on the phase-space distributions, beam optics through the beam-transport lines as well as the rotating gantry were designed. Since horizontal and vertical beam emittances, as extracted slowly from the synchrotron, generally differ with each other, a horizontal-vertical beam coupling would occur when the gantry rotates. Thus, the size and shape of beam spots at the isocenter should vary depending on the gantry angle. To compensate for the difference in the emittances, we employed a method to utilize multiple Coulomb scattering of the beam particles by a thin scatterer. Having compensated for the emittances and designed beam optics through the rotating gantry, beam commissioning over various combinations of gantry angles and beam energies was performed. By finely tuning the superconducting quadrupoles of the rotating gantry, we could successfully obtain the designed beam quality, which satisfies the requirements of scanning irradiation.

  13. Haemosporida prevalence and diversity are similar in endangered wild whooping cranes (Grus americana) and sympatric sandhill cranes (Grus canadensis).

    PubMed

    Bertram, Miranda R; Hamer, Gabriel L; Hartup, Barry K; Snowden, Karen F; Medeiros, Matthew C; Hamer, Sarah A

    2017-04-01

    The population growth of endangered whooping cranes (Grus americana) is not consistent with species recovery goals, and the impact of parasite infection on whooping crane populations is largely unknown. Disease ecology and epidemiology research of endangered species is often hindered by limited ability to conduct invasive sampling on the target taxa. Accordingly, we hypothesized that sandhill cranes (Grus canadensis) would be a useful surrogate species to investigate the health impacts of Haemosporida infection in whooping cranes. Our goal was to compare the prevalence and diversity of Haemosporida infection between whooping cranes and sandhill cranes. We detected an overall infection prevalence of 83·6% (n = 61) in whooping cranes and 59·6% (n = 47) and 63·6 (n = 22) in two sympatric sandhill crane populations captured in Texas. Prevalence was significantly lower in allopatric sandhill cranes captured in New Mexico (12·1%, n = 33). Haemoproteus antigonis was the most abundant haemoparasite in cranes, present in 57·4% of whooping cranes and 39·2% of sandhill cranes; Plasmodium and Leucocytozoon were present at significantly lower levels. The high prevalence of Haemosporida in whooping cranes and sympatric sandhill cranes, with shared parasite lineages between the two species, supports sandhill cranes as a surrogate species for understanding health threats to endangered whooping cranes.

  14. SU-E-T-195: Gantry Angle Dependency of MLC Leaf Position Error

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ju, S; Hong, C; Kim, M

    Purpose: The aim of this study was to investigate the gantry angle dependency of the multileaf collimator (MLC) leaf position error. Methods: An automatic MLC quality assurance system (AutoMLCQA) was developed to evaluate the gantry angle dependency of the MLC leaf position error using an electronic portal imaging device (EPID). To eliminate the EPID position error due to gantry rotation, we designed a reference maker (RM) that could be inserted into the wedge mount. After setting up the EPID, a reference image was taken of the RM using an open field. Next, an EPID-based picket-fence test (PFT) was performed withoutmore » the RM. These procedures were repeated at every 45° intervals of the gantry angle. A total of eight reference images and PFT image sets were analyzed using in-house software. The average MLC leaf position error was calculated at five pickets (-10, -5, 0, 5, and 10 cm) in accordance with general PFT guidelines using in-house software. This test was carried out for four linear accelerators. Results: The average MLC leaf position errors were within the set criterion of <1 mm (actual errors ranged from -0.7 to 0.8 mm) for all gantry angles, but significant gantry angle dependency was observed in all machines. The error was smaller at a gantry angle of 0° but increased toward the positive direction with gantry angle increments in the clockwise direction. The error reached a maximum value at a gantry angle of 90° and then gradually decreased until 180°. In the counter-clockwise rotation of the gantry, the same pattern of error was observed but the error increased in the negative direction. Conclusion: The AutoMLCQA system was useful to evaluate the MLC leaf position error for various gantry angles without the EPID position error. The Gantry angle dependency should be considered during MLC leaf position error analysis.« less

  15. VMAT linear accelerator commissioning and quality assurance: dose control and gantry speed tests

    PubMed Central

    Rowshanfarzad, Pejman; Greer, Peter B.

    2016-01-01

    In VMAT treatment delivery the ability of the linear accelerator (linac) to accurately control dose versus gantry angle is critical to delivering the plan correctly. A new VMAT test delivery was developed to specifically test the dose versus gantry angle with the full range of allowed gantry speeds and dose rates. The gantry‐mounted IBA MatriXX with attached inclinometer was used in movie mode to measure the instantaneous relative dose versus gantry angle during the plan every 0.54 s. The results were compared to the expected relative dose at each gantry angle calculated from the plan. The same dataset was also used to compare the instantaneous gantry speeds throughout the delivery compared to the expected gantry speeds from the plan. Measurements performed across four linacs generally show agreement between measurement and plan to within 1.5% in the constant dose rate regions and dose rate modulation within 0.1 s of the plan. Instantaneous gantry speed was measured to be within 0.11∘/s of the plan (1 SD). An error in one linac was detected in that the nominal gantry speed was incorrectly calibrated. This test provides a practical method to quality‐assure critical aspects of VMAT delivery including dose versus gantry angle and gantry speed control. The method can be performed with any detector that can acquire time‐resolved dosimetric information that can be synchronized with a measurement of gantry angle. The test fulfils several of the aims of the recent Netherlands Commission on Radiation Dosimetry (NCS) Report 24, which provides recommendations for comprehensive VMAT quality assurance. PACS number(s): 87.55.Qr PMID:27167282

  16. Techniques for rearing and releasing nonmigratory cranes: Lessons from the Mississippi Sandhill Crane program

    USGS Publications Warehouse

    Ellis, D.H.; Olsen, Glenn H.; Gee, G.F.; Nicolich, Jane M.; O'Malley, K.E.; Nagendran, Meenakshi; Hereford, Scott G.; Range, P.; Harper, W.T.; Ingram, R.P.; Smith, D.G.

    1992-01-01

    Captive-reared Mississippi sandhill cranes (Grus canadensis pulla) reared at the Patuxent Wildlife Research Center (Patuxent) have been released at the Mississippi Sandhill Crane National Wildlife Refuge (MSCNWR) since 1981. Of 131 birds released through December 1990, 103 were reared by foster parents. The remaining 28 were experimentally hand-reared in 1989 and 1990. After refining release procedures, parent-reared birds have integrated into the wild flock, many have survived, and some have bred. Releases of hand-reared cranes elsewhere in the 1970's were largely unsuccessful, at least in part due to the lack of a lengthy acclimation period. A new hand-rearing protocol holds promise in producing release-worthy birds. The technique employs some features first used in the 1960's (e.g., a costume for the human caretaker and model crane heads used to train chicks to feed). In the mid-1980's, the following features were added: (1) the costumed caretaker was given a visor and feathers, (2) a taxidermic crane head or a hand puppet was held or suspended from the ceiling for use in stimulating chicks to feed, (3) a taxidermic mount of a brooding crane supplied warmth, (4) a full-sized live crane was maintained in an adjacent pen and in visual contact with neonatal young to provide an imprinting model, and (5) a small group of adult (or subadult) cranes was penned adjacent to the outdoor chick pens to provide socialization models. Recent releases of Mississippi sandhill cranes hand-reared according to this protocol and released in Mississippi have had high first-year survival rates. The now-operational technique holds promise for producing large numbers of release-worthy birds.

  17. Mycotoxin-induced disease in captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis)

    USGS Publications Warehouse

    Olsen, Glenn H.; Carpenter, J.W.; Gee, G.F.; Thomas, N.J.; Dein, F.J.

    1995-01-01

    In 1987, an epizootic in cranes at the Patuxent Wildlife Research Center, Laurel, Maryland, USA, caused illness in 80% of 300 captive whooping cranes (Grus americana) and sandhill cranes (Grus canadensis) and death of 15 of these cranes. Gross pathology findings were inconclusive and consisted of dehydration, atrophy of fat, renal insufficiency, and small spleens. Extensive testing resulted in isolation of Fusarium sp. mold from constituents of the grain-based diet. Low levels of two mycotoxins, T2 (1-2 ppm) and deoxynivalenol (0.4 ppm), were isolated from the pelleted feed.

  18. Space spider crane

    NASA Technical Reports Server (NTRS)

    Macconochie, Ian O. (Inventor); Mikulas, Martin M., Jr. (Inventor); Pennington, Jack E. (Inventor); Kinkead, Rebecca L. (Inventor); Bryan, Charles F., Jr. (Inventor)

    1988-01-01

    A space spider crane for the movement, placement, and or assembly of various components on or in the vicinity of a space structure is described. As permanent space structures are utilized by the space program, a means will be required to transport cargo and perform various repair tasks. A space spider crane comprising a small central body with attached manipulators and legs fulfills this requirement. The manipulators may be equipped with constant pressure gripping end effectors or tools to accomplish various repair tasks. The legs are also equipped with constant pressure gripping end effectors to grip the space structure. Control of the space spider crane may be achieved either by computer software or a remotely situated human operator, who maintains visual contact via television cameras mounted on the space spider crane. One possible walking program consists of a parallel motion walking program whereby the small central body alternatively leans forward and backward relative to end effectors.

  19. Head-bobbing behavior in walking whooping cranes (Grus americana) and sandhill cranes (Grus canadensis)

    USGS Publications Warehouse

    Cronin, Thomas W.; Kinloch, Matthew R.; Olsen, Glenn H.

    2007-01-01

    Head-bobbing is a common and characteristic behavior of walking birds. While the activity could have a relatively minor biomechanical function, for balance and stabilization of gait, head-bobbing is thought to be primarily a visual behavior in which fixation of gaze alternates with a forward movement that generates visual flow. We studied head-bobbing in locomoting whooping cranes (Grus americana) and sandhill cranes (Grus canadensis), using food strewn on the ground to motivate them to walk or run. When the cranes walked, head-bobbing proceeded in a four-step sequence that was closely linked to the stepping cycle. The time available for gaze stabilization decreased with travel speed, and running cranes did not head-bob at all. As a crane extended its bill towards the ground for food, it also exhibited a series of short head-bobs that were not associated with forward travel. Head-bobbing is a flexible behavior that varies with gait and with visual search, most notably as the cranes prepare to strike with the bill.

  20. CRANE POSITIONING APPARATUS

    DOEpatents

    Landsiedel, F.W.; Wolff, H.

    1960-06-28

    An apparatus is described for automatically accomplishing the final accurate horizontal positioning of a crane after the latter has been placed to within 1/8 in. of its selected position. For this purpose there is provided a tiltable member on the crane mast for lowering into contact with a stationary probe. Misalignment of the tiltable member, with respect to the probe as the member is lowered, causes tilting of the latter to actuate appropriate switches that energize motors for bringing the mast into proper position. When properly aligned the member is not tilted and a central switch is actuated to indicate the final alignment of the crane.

  1. Opportunistically collected data reveal habitat selection by migrating Whooping Cranes in the U.S. Northern Plains

    USGS Publications Warehouse

    Niemuth, Neil D.; Ryba, Adam J.; Pearse, Aaron T.; Kvas, Susan M.; Brandt, David; Wangler, Brian; Austin, Jane; Carlisle, Martha J.

    2018-01-01

    The Whooping Crane (Grus americana) is a federally endangered species in the United States and Canada that relies on wetland, grassland, and cropland habitat during its long migration between wintering grounds in coastal Texas, USA, and breeding sites in Alberta and Northwest Territories, Canada. We combined opportunistic Whooping Crane sightings with landscape data to identify correlates of Whooping Crane occurrence along the migration corridor in North Dakota and South Dakota, USA. Whooping Cranes selected landscapes characterized by diverse wetland communities and upland foraging opportunities. Model performance substantially improved when variables related to detection were included, emphasizing the importance of accounting for biases associated with detection and reporting of birds in opportunistic datasets. We created a predictive map showing relative probability of occurrence across the study region by applying our model to GIS data layers; validation using independent, unbiased locations from birds equipped with platform transmitting terminals indicated that our final model adequately predicted habitat use by migrant Whooping Cranes. The probability map demonstrated that existing conservation efforts have protected much top-tier Whooping Crane habitat, especially in the portions of North Dakota and South Dakota that lie east of the Missouri River. Our results can support species recovery by informing prioritization for acquisition and restoration of landscapes that provide safe roosting and foraging habitats. Our results can also guide the siting of structures such as wind towers and electrical transmission and distribution lines, which pose a strike and mortality risk to migrating Whooping Cranes.

  2. Inclusion body disease of cranes: comparison of pathologic findings in cranes with acquired vs. experimentally induced disease

    USGS Publications Warehouse

    Schuh, J.C.; Sileo, L.; Siegfried, Lynne M.; Yuill, Thomas M.

    1986-01-01

    Inclusion body disease of cranes was the cause of death in 17 immature and mature cranes of 5 different species in Wisconsin. A herpesvirus of unknown origin was the apparent cause. An isolate of this herpesvirus was used to experimentally infect 3 species of cranes. Macroscopic and microscopic lesions associated with naturally acquired and experimentally induced disease were essentially identical. Multifocal hepatic and splenic necrosis was found in all cranes evaluated. Necrosis of the gastrointestinal tract, thymus, and bursa of Fabricius also was seen in some of the cranes. Eosinophilic intranuclear inclusion bodies often were commonly associated with hepatic lesions, sometimes with the splenic lesions, and rarely with the thymic or gastrointestinal tract lesions. The lesions of this inclusion body disease were similar to those reported for cranes in Austria from which a crane herpesvirus was isolated.

  3. Population sizes and group characteristics of Siberian Crane (Leucogeranus leucogeranus) and Hooded Crane (Grus monacha) in Poyang Lake Wetland

    PubMed Central

    SHAO, Ming-Qin; GUO, Hong; JIANG, Jian-Hong

    2014-01-01

    Both the Siberian Crane (Leucogeranus leucogeranus) and Hooded Crane (Grus monacha) have limited population sizes and are considered endangered by domestic Chinese and international agencies. To document the current size of their respective populations and characterize their groups, between October 2012 and April 2013 we undertook fieldwork at four nature reserve areas within the Poyang Lake wetlands. We divided Poyanghu National Nature Reserve (PYH) into the Wucheng (PWC) and Hengfeng areas (PHF), because each are each located in different counties. Our fieldwork showed that the Siberian Crane occurred mainly in PYH (364 in the PHF, 158 in the PWC) and the Nanjishan Wetland National Nature Reserve (NJS, with 200 individuals). The Hooded Crane was mainly distributed in PYH (302 in the PHF and 154 in the PWC). Family groups accounted for more than 50% of the total number of groups among both species, with Hooded Cranes forming more family groups than Siberian Cranes. Typically, these groups were formed of two adults with one offspring (Siberian Crane), and two adults with two offspring (Hooded Crane), with the mean family group size of the Siberian Crane and Hooded Crane being respectively 2.65±0.53 (n=43) and 3.09±0.86 (n=47) individuals per group. The mean collective group size of the Siberian Crane and Hooded Crane included 28.09±24.94 (n=23) and 28.94±27.97 (n=16) individuals per group, respectively, with the proportion of juveniles among Hooded Cranes being more than double that seen among the Siberian Cranes. PMID:25297076

  4. Vertebral formula in red-crowned crane (Grus japonensis) and hooded crane (Grus monacha).

    PubMed

    Hiraga, Takeo; Sakamoto, Haruka; Nishikawa, Sayaka; Muneuchi, Ippei; Ueda, Hiromi; Inoue, Masako; Shimura, Ryoji; Uebayashi, Akiko; Yasuda, Nobuhiro; Momose, Kunikazu; Masatomi, Hiroyuki; Teraoka, Hiroki

    2014-04-01

    Red-crowned cranes (Grus japonensis) are distributed separately in the east Eurasian Continent (continental population) and in Hokkaido, Japan (island population). The island population is sedentary in eastern Hokkaido and has increased from a very small number of cranes to over 1,300, thus giving rise to the problem of poor genetic diversity. While, Hooded cranes (Grus monacha), which migrate from the east Eurasian Continent and winter mainly in Izumi, Kagoshima Prefecture, Japan, are about eight-time larger than the island population of Red-crowned cranes. We collected whole bodies of these two species, found dead or moribund in eastern Hokkaido and in Izumi, and observed skeletons with focus on vertebral formula. Numbers of cervical vertebrae (Cs), thoracic vertebrae (Ts), vertebrae composing the synsacrum (Sa) and free coccygeal vertebrae (free Cos) in 22 Red-crowned cranes were 17 or 18, 9-11, 13 or 14 and 7 or 8, respectively. Total number of vertebrae was 47, 48 or 49, and the vertebral formula was divided into three types including 9 sub-types. Numbers of Cs, Ts, vertebrae composing the Sa and free Cos in 25 Hooded cranes were 17 or 18, 9 or 10, 12-14 and 6-8, respectively. Total number of vertebrae was 46, 47, 48 or 49, and the vertebral formula was divided into four types including 14 sub-types. Our findings clearly showed various numerical vertebral patterns in both crane species; however, these variations in the vertebral formula may be unrelated to the genetic diversity.

  5. Vertebral Formula in Red-Crowned Crane (Grus japonensis) and Hooded Crane (Grus monacha)

    PubMed Central

    HIRAGA, Takeo; SAKAMOTO, Haruka; NISHIKAWA, Sayaka; MUNEUCHI, Ippei; UEDA, Hiromi; INOUE, Masako; SHIMURA, Ryoji; UEBAYASHI, Akiko; YASUDA, Nobuhiro; MOMOSE, Kunikazu; MASATOMI, Hiroyuki; TERAOKA, Hiroki

    2013-01-01

    ABSTRACT Red-crowned cranes (Grus japonensis) are distributed separately in the east Eurasian Continent (continental population) and in Hokkaido, Japan (island population). The island population is sedentary in eastern Hokkaido and has increased from a very small number of cranes to over 1,300, thus giving rise to the problem of poor genetic diversity. While, Hooded cranes (Grus monacha), which migrate from the east Eurasian Continent and winter mainly in Izumi, Kagoshima Prefecture, Japan, are about eight-time larger than the island population of Red-crowned cranes. We collected whole bodies of these two species, found dead or moribund in eastern Hokkaido and in Izumi, and observed skeletons with focus on vertebral formula. Numbers of cervical vertebrae (Cs), thoracic vertebrae (Ts), vertebrae composing the synsacrum (Sa) and free coccygeal vertebrae (free Cos) in 22 Red-crowned cranes were 17 or 18, 9–11, 13 or 14 and 7 or 8, respectively. Total number of vertebrae was 47, 48 or 49, and the vertebral formula was divided into three types including 9 sub-types. Numbers of Cs, Ts, vertebrae composing the Sa and free Cos in 25 Hooded cranes were 17 or 18, 9 or 10, 12–14 and 6–8, respectively. Total number of vertebrae was 46, 47, 48 or 49, and the vertebral formula was divided into four types including 14 sub-types. Our findings clearly showed various numerical vertebral patterns in both crane species; however, these variations in the vertebral formula may be unrelated to the genetic diversity. PMID:24334828

  6. Modeling sandhill crane population dynamics

    USGS Publications Warehouse

    Johnson, D.H.

    1979-01-01

    The impact of sport hunting on the Central Flyway population of sandhill cranes (Grus canadensis) has been a subject of controversy for several years. A recent study (Buller 1979) presented new and important information on sandhill crane population dynamics. The present report is intended to incorporate that and other information into a mathematical model for the purpose of assessing the long-range impact of hunting on the population of sandhill cranes.The model is a simple deterministic system that embodies density-dependent rates of survival and recruitment. The model employs four kinds of data: (1) spring population size of sandhill cranes, estimated from aerial surveys to be between 250,000 and 400,000 birds; (2) age composition in fall, estimated for 1974-76 to be 11.3% young; (3) annual harvest of cranes, estimated from a variety of sources to be about 5 to 7% of the spring population; and (4) age composition of harvested cranes, which was difficult to estimate but suggests that immatures were 2 to 4 times as vulnerable to hunting as adults.Because the true nature of sandhill crane population dynamics remains so poorly understood, it was necessary to try numerous (768 in all) combinations of survival and recruitment functions, and focus on the relatively few (37) that yielded population sizes and age structures comparable to those extant in the real population. Hunting was then applied to those simulated populations. In all combinations, hunting resulted in a lower asymptotic crane population, the decline ranging from 5 to 54%. The median decline was 22%, which suggests that a hunted sandhill crane population might be about three-fourths as large as it would be if left unhunted. Results apply to the aggregate of the three subspecies in the Central Flyway; individual subspecies or populations could be affected to a greater or lesser degree.

  7. ANTI-SWING CRANE

    DOEpatents

    Goertz, R.C.

    1957-09-17

    A device that reduces or eliminntes the swing of an object being transported by a traveling crane is described. The supporting cable of the crane extends through a guide and follower positioned below the crane by an electric motor and follow-up circuit. The swing or horizontal motion of the cable is detected by the follower, and a signal is generated that will cause the motor to move the follower in opposition to the motion of the swing thus having a dampening effect on the pendulum action of the supported body. This improvement is particularly valuable when the supported load may be so radioactive that a person could not manually stop the swing.

  8. 13. TOP OF STATIC TEST TOWER VIEW OF STEEL TRUSS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. TOP OF STATIC TEST TOWER VIEW OF STEEL TRUSS STRUCTURE AND OVERHEAD CRANE. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  9. Book review: A chorus of cranes: The cranes of North America and the world

    USGS Publications Warehouse

    Pearse, Aaron T.

    2017-01-01

    Cranes (Gruidae) are widely distributed throughout the world, have lived on Earth for several million years, and currently reside on five continents. Archaeological evidence and historical references suggest that humans have interacted with and been captivated by cranes for many thousands of years (e.g., Leslie 1988, Muellner 1990). A glimpse of our reverence for these birds can be found in A Chorus of Cranes by Paul A. Johnsgard, with photographs by Thomas D. Mangelsen. Many species of cranes are currently identified as threatened or endangered, and their future will likely rest in the hands of humans; this book presents their plight and some of the measures that have been taken to conserve them. Dr. Johnsgard, an emeritus professor at the University of Nebraska-Lincoln, is a prolific writer, having written more than 60 books in ornithology and other topics. This book serves as the latest update of previous efforts concerning crane biology, conservation, and management. A review without making comparisons to his past works is difficult, yet this assessment will primarily focus on the content of the current book, with little reference to past endeavors.A Chorus of Cranes: The Cranes of North America and the World by Paul A. Johnsgard. 2015. University Press of Colorado, Boulder, CO, USA. x + 208 pp., 38 color photographs, 41 figures. ISBN 978-1-60732-436-2. $23.95 (Ebook). ISBN 978-1-60732-436-9.

  10. Mortality of Mississippi Sandhill Crane chicks

    USGS Publications Warehouse

    Olsen, Glenn H.

    2004-01-01

    Mississippi sandhill cranes (Grus canadensis pulla) are a highly endangered species that live in the wild in 1 county in Mississippi. As part of a large effort to restore these endangered cranes, we are conducting a project to look at the causes of mortality in crane chicks on the Mississippi Sandhill Crane National Wildlife Refuge in Gautier, MS, USA. This includes surgically implanting miniature radio transmitters in crane chicks to gather data on mortality. This article describes some of the practical difficulties in conducting this type of project in a savannah and swamp location along the Gulf Coast of the USA.

  11. Disseminated visceral coccidiosis in sandhill cranes

    USGS Publications Warehouse

    Carpenter, J.W.; Novilla, M.N.; Fayer, R.; Iverson, G.C.

    1984-01-01

    Disseminated visceral coccidiosis (DVC) caused by Eimeria spp was first recognized as a disease entity in captive sandhill cranes (Grus canadensis) and whooping cranes (G americana) at the Patuxent Wildlife Research Center. Because cranes produced at the Center are reintroduced to the wild to augment wild populations, studies involving both experimentally induced and natural infections were initiated to determine the potential or actual occurrence of DVC in wild Gruidae. Nine sandhill cranes dosed orally with eimerian oocysts of wild origin developed lesions characteristic of DVC. Extraintestinal granulomas associated with developing schizonts were found in 6 birds. Similar lesions were observed in wild sandhill cranes throughout parts of midwestern United States, Alaska, and Saskatchewan. These studies revealed the wide geographic distribution and the high frequency of occurrence of DVC in wild cranes.

  12. Design of Conduction-cooled HTS Coils for a Rotating Gantry

    NASA Astrophysics Data System (ADS)

    Takayama, Shigeki; Koyanagi, Kei; Yamaguchi, Akiko; Tasaki, Kenji; Kurusu, Tsutomu; Ishii, Yusuke; Amemiya, Naoyuki; Ogitsu, Toru; Noda, Koji

    Carbon ion cancer therapy is becoming more widespread due to its high curative effects and low burden on patients. Carbon ions are delivered to patients through electromagnets on a rotating gantry.A rotating gantry is attractive because it allows carbon ions to irradiate a tumor from any direction without changing the posture of the patient. On the other hand, because of the high magnetic rigidity of carbon ions, the weight of a rotating gantry for carbon cancer therapy is about three times higher than one for proton cancer therapy, according to our estimation. The use of high-temperature superconducting (HTS) magnets has been considered for reducing the size of the rotating gantry for carbon cancer therapy. The target weight is 200 t or less,which is equivalent to the weight of a typical rotating gantry for proton cancer therapy.In this study, the magnet layout of the rotating gantry and the superconducting magnets were designed from the viewpoint of beam optics.When applying high-temperature superconductors to accelerator magnets, there are some issues that should be considered, for example, the influence of tape magnetization and manufacturing accuracy on the field quality, the thermal stability of the conduction-cooled HTS coils under an alternating magnetic field, and methods to protect the coils from thermal runaway caused by an anomalous thermal input such as that due to beam loss. First, the thermal stability of the conduction-cooled HTS coils was simulated numerically, and the thermal runaway current was calculated in a static situation.

  13. SU-E-T-130: Are Proton Gantries Needed? An Analysis of 4332 Patient Proton Gantry Treatment Plans From the Past 10 Years

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yan, S; Lu, H; Flanz, J

    2015-06-15

    Purpose: To ascertain the necessity of a proton gantry, as compared to the feasibility of using a horizontal fixed proton beam-line for treatment with advanced technology. Methods: To calculate the percentage of patients that can be treated with a horizontal fixed beam-line instead of a gantry, we analyze the distributions of beam orientations of our proton gantry patients treated over the past 10 years. We identify three horizontal fixed beam geometries (FIXED, BEND and MOVE) with the patient in lying and/or sitting positions. The FIXED geometry includes only table/chair rotations and translations. In BEND, the beam can be bent up/downmore » for up to 20 degrees. MOVE allows for patient head/body angle adjustment. Based on the analysis, we select eight patients whose plan involves beams which are still challenging to achieve with a horizontal fixed beam. These beams are removed in the pencil beam scanning (PBS) plan optimized for the fixed beam-line (PBS-fix). We generate non-coplanar PBS-gantry plans for comparison, and perform a robustness analysis. Results: The percentage of patients with head-and-neck/brain tumors that can be treated with horizontal fixed beam is 44% in FIXED, 70% in 20-degrees BEND, and 100% in 90-degrees MOVE. For torso regions, 99% of the patients can be treated in 20-degree BEND. The target coverage is more homogeneous with PBS-fix plans compared to the clinical scattering treatment plans. The PBS-fix plans reduce the mean dose to organs-at-risk by a factor of 1.1–28.5. PBS-gantry plans are as good as PBS-fix plans, sometimes marginally better. Conclusion: The majority of the beam orientations can be realized with a horizontal fixed beam-line. Challenging non-coplanar beams can be eliminated with PBS delivery. Clinical implementation of the proposed fixed beam-line requires use of robotic patient positioning, further developments in immobilization, and image guidance. However, our results suggest that fixed beam-lines can be as

  14. Impacts of gantry angle dependent scanning beam properties on proton PBS treatment

    NASA Astrophysics Data System (ADS)

    Lin, Yuting; Clasie, Benjamin; Lu, Hsiao-Ming; Flanz, Jacob; Shen, Tim; Jee, Kyung-Wook

    2017-01-01

    While proton beam models in treatment planning systems are generally assumed invariant with respect to the beam deliveries at different gantry angles. Physical properties of scanning pencil beams can change. The gantry angle dependent properties include the delivered charge to the monitor unit chamber, the spot position and the spot shape. The aim of this study is to investigate the extent of the changes and their dosimetric impacts using historical pencil beam scanning (PBS) treatment data. Online beam delivery records at the time of the patient-specific qualify assurance were retrospectively collected for a total of 34 PBS fields from 28 patients treated at our institution. For each field, proton beam properties at two different gantry angles (the planned and zero gantry angles) were extracted by a newly-developed machine log analysis method and used to reconstruct the delivered dose distributions in the cubic water phantom geometry. The reconstructed doses at the two different angles and a planar dose measurement by a 2D ion-chamber array were compared and the dosimetric impacts of the gantry angle dependency were accessed by a 3D γ-index analysis. In addition, the pencil beam spot size was independently characterized as a function of the gantry angle and the beam energy. The dosimetric effects of the perturbed beam shape were also investigated. Comparisons of spot-by-spot beam positions between both gantry angles show a mean deviation of 0.4 and 0.7 mm and a standard deviation of 0.3 and 0.6 mm for x and y directions, respectively. The delivered giga-protons per spot show a percent mean difference and a standard deviation of 0.01% and 0.3%, respectively, from each planned spot weight. These small deviations lead to an excellent agreement in dose comparisons with an average γ passing rate of 99.1%. When each calculation for both planned and zero gantry angles was compared to the measurement, a high correlation in γ values was also observed, also

  15. Development of a compact superconducting rotating-gantry for heavy-ion therapy

    PubMed Central

    Iwata, Yoshiyuki; Noda, K.; Murakami, T.; Shirai, T.; Furukawa, T.; Fujita, T.; Mori, S.; Sato, S.; Mizushima, K.; Shouda, K.; Fujimoto, T.; Arai, H.; Ogitsu, T.; Obana, T.; Amemiya, N.; Orikasa, T.; Takami, S.; Takayama, S.

    2014-01-01

    An isocentric superconducting rotating-gantry for heavy-ion therapy is being developed [ 1]. This rotating gantry can transport heavy ions having 430 MeV/u to an isocenter with irradiation angles of over ±180°, and is further capable of performing fast raster-scanning irradiation [ 2]. A layout of the beam-transport line for the compact rotating-gantry is presented in Fig. 1. The rotating gantry has 10 superconducting magnets (BM01-10), a pair of the scanning magnets (SCM-X and SCM-Y) and two pairs of beam profile- monitor and steering magnets (ST01-02 and PRN01-02). For BM01-BM06 and BM09-BM10, the combined-function superconducting magnets are employed. Further, these superconducting magnets are designed for fast slewing of the magnetic field to follow the multiple flattop operation of the synchrotron [ 3]. The use of the combined-function superconducting magnets with optimized beam optics allows a compact gantry design with a large scan size at the isocenter; the length and the radius of the gantry will be to be ∼13 and 5.5 m, respectively, which are comparable to those for the existing proton gantries. Furthermore, the maximum scan size at the isocenter is calculated to be as large as ∼200 mm square for heavy-ion beams at the maximum energy of 430 MeV/u. All of the superconducting magnets were designed, and their magnetic fields were calculated using the Opera-3d code [ 4]. With the calculated magnetic fields, beam-tracking simulations were made. The simulation results agreed well with those of the linear beam-optics calculation, proving validity of the final design for the superconducting magnets. The five out of 10 superconducting magnets, as well as the model magnet were currently manufactured. With these magnets, rotation tests, magnetic field measurements and fast slewing tests were conducted. However, we did not observe any significant temperature increase, which may cause a quench problem. Further, results of the magnetic field measurements roughly

  16. Human Factors Engineering Guidelines for Overhead Cranes

    NASA Technical Reports Server (NTRS)

    Chandler, Faith; Delgado, H. (Technical Monitor)

    2001-01-01

    This guideline provides standards for overhead crane cabs that can be applied to the design and modification of crane cabs to reduce the potential for human error due to design. This guideline serves as an aid during the development of a specification for purchases of cranes or for an engineering support request for crane design modification. It aids human factors engineers in evaluating existing cranes during accident investigations or safety reviews.

  17. SU-E-P-45: An Analytical Formula for Deriving Mechanical Iso-Center of Rotational Gantry Treatment Unit Rotational Gantry Treatment Unit

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ding, X; Bues, M

    2015-06-15

    Purpose: To present an analytical formula for deriving mechanical isocenter (MIC) of a rotational gantry treatment unit. The input data to the formula is obtained by a custom-made device. The formula has been implemented and used in an operational proton therapy facility since 2005. Methods: The custom made device consisted of 3 mutually perpendicular dial indicators and 5 clinometers, to obtain displacement data and gantry angle data simultaneously. During measurement, a steel sphere was affixed to the patient couch, and the device was attached to the snout rotating with the gantry. The displacement data and angle data were obtained simultaneouslymore » at angular increments of less than 1 degree. The analytical formula took the displacement and angle as input and derived the positions of dial indicator tips (DIT) position in room-fixed coordinate system. The formula derivation presupposes trigonometry and 3-dimentional coordinate transformations. Due to the symmetry properties of the defining equations, the DIT position can be solved for analytically without using mathematical approximations. We define the mean of all points in the DIT trajectory as the MIC. The formula was implemented in computer code, which has been employed during acceptance test, commissioning, as well as routine QA practice in an operational proton facility since 2005. Results: It took one minute for the custom-made device to acquire the measurement data for a full gantry rotation. The DIT trajectory and MIS are instantaneously available after the measurement. The MIC Result agrees well with vendor’s Result, which came from a different measurement setup, as well as different data analysis algorithm. Conclusion: An analytical formula for deriving mechanical isocenter was developed and validated. The formula is considered to be absolutely accurate mathematically. Be analyzing measured data of radial displacements as function of gantry angle, the formula calculates the MI position in room

  18. Use of a helicopter to capture flighted cranes

    USGS Publications Warehouse

    Ellis, D.H.; Hjertaas, D.; Johns, B.W.; Urbanek, R.P.

    1998-01-01

    Using a helicopter, we pursued 12 sandhill cranes (Grus canadensis) and captured 6. In forested habitat, cranes could be forced down, but we were unable to deploy the pursuit team, so cranes could not be captured. In open habitat, every crane we pursued was captured. Target cranes were forced to the ground in 0.3-14 minutes. Adjusting pursuit distance (50-150 m) was essential in promoting fatigue and in preventing escape of target cranes.

  19. Reliability Modeling of Double Beam Bridge Crane

    NASA Astrophysics Data System (ADS)

    Han, Zhu; Tong, Yifei; Luan, Jiahui; Xiangdong, Li

    2018-05-01

    This paper briefly described the structure of double beam bridge crane and the basic parameters of double beam bridge crane are defined. According to the structure and system division of double beam bridge crane, the reliability architecture of double beam bridge crane system is proposed, and the reliability mathematical model is constructed.

  20. Nonhunting mortality in sandhill cranes

    USGS Publications Warehouse

    Windingstad, R.M.

    1988-01-01

    Records of 170 sandhill cranes (Grus canadensis) necropsied at the National Wildlife Health Research Center, Wisconsin, from 1976 through 1985 were reviewed as representative samples to determine causes of nonhunting mortality in the mid-continent and Rocky Mountain populations of sandhill cranes. Avian cholera, avian botulism, and ingestion of mycotoxins were leading causes of nonhunting mortality. Hailstorms, lightning, lead poisoning, predation, avian tuberculosis, and collisions with power lines also killed cranes.

  1. 46 CFR 109.521 - Cranes: General.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

  2. 46 CFR 109.521 - Cranes: General.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

  3. 46 CFR 109.521 - Cranes: General.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

  4. 46 CFR 109.521 - Cranes: General.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

  5. 46 CFR 109.521 - Cranes: General.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Cranes: General. 109.521 Section 109.521 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes... maintained in accordance with the API Recommended Practice for Operation and Maintenance of Offshore Cranes...

  6. The African Crane Database (1978-2014): Records of three threatened crane species (Family: Gruidae) from southern and eastern Africa

    PubMed Central

    Smith, Tanya; Page-Nicholson, Samantha; Gibbons, Bradley; Jones, M. Genevieve W.; van Niekerk, Mark; Botha, Bronwyn; Oliver, Kirsten; McCann, Kevin

    2016-01-01

    Abstract Background The International Crane Foundation (ICF) / Endangered Wildlife Trust’s (EWT) African Crane Conservation Programme has recorded 26 403 crane sightings in its database from 1978 to 2014. This sightings collection is currently ongoing and records are continuously added to the database by the EWT field staff, ICF/EWT Partnership staff, various partner organizations and private individuals. The dataset has two peak collection periods: 1994-1996 and 2008-2012. The dataset collection spans five African countries: Kenya, Rwanda, South Africa, Uganda and Zambia; 98% of the data were collected in South Africa. Georeferencing of the dataset was verified before publication of the data. The dataset contains data on three African crane species: Blue Crane Anthropoides paradiseus, Grey Crowned Crane Balearica regulorum and Wattled Crane Bugeranus carunculatus. The Blue and Wattled Cranes are classified by the IUCN Red List of Threatened Species as Vulnerable and the Grey Crowned Crane as Endangered. New information This is the single most comprehensive dataset published on African Crane species that adds new information about the distribution of these three threatened species. We hope this will further aid conservation authorities to monitor and protect these species. The dataset continues to grow and especially to expand in geographic coverage into new countries in Africa and new sites within countries. The dataset can be freely accessed through the Global Biodiversity Information Facility data portal. PMID:27956850

  7. The African Crane Database (1978-2014): Records of three threatened crane species (Family: Gruidae) from southern and eastern Africa.

    PubMed

    Smith, Tanya; Page-Nicholson, Samantha; Morrison, Kerryn; Gibbons, Bradley; Jones, M Genevieve W; van Niekerk, Mark; Botha, Bronwyn; Oliver, Kirsten; McCann, Kevin; Roxburgh, Lizanne

    2016-01-01

    The International Crane Foundation (ICF) / Endangered Wildlife Trust's (EWT) African Crane Conservation Programme has recorded 26 403 crane sightings in its database from 1978 to 2014. This sightings collection is currently ongoing and records are continuously added to the database by the EWT field staff, ICF/EWT Partnership staff, various partner organizations and private individuals. The dataset has two peak collection periods: 1994-1996 and 2008-2012. The dataset collection spans five African countries: Kenya, Rwanda, South Africa, Uganda and Zambia; 98% of the data were collected in South Africa. Georeferencing of the dataset was verified before publication of the data. The dataset contains data on three African crane species: Blue Crane Anthropoides paradiseus , Grey Crowned Crane Balearica regulorum and Wattled Crane Bugeranus carunculatus . The Blue and Wattled Cranes are classified by the IUCN Red List of Threatened Species as Vulnerable and the Grey Crowned Crane as Endangered. This is the single most comprehensive dataset published on African Crane species that adds new information about the distribution of these three threatened species. We hope this will further aid conservation authorities to monitor and protect these species. The dataset continues to grow and especially to expand in geographic coverage into new countries in Africa and new sites within countries. The dataset can be freely accessed through the Global Biodiversity Information Facility data portal.

  8. Performing a Large-Scale Modal Test on the B2 Stand Crane at NASA's Stennis Space Center

    NASA Technical Reports Server (NTRS)

    Stasiunas, Eric C.; Parks, Russel A.; Sontag, Brendan D.

    2018-01-01

    A modal test of NASA's Space Launch System (SLS) Core Stage is scheduled to occur at the Stennis Space Center B2 test stand. A derrick crane with a 150-ft long boom, located at the top of the stand, will be used to suspend the Core Stage in order to achieve defined boundary conditions. During this suspended modal test, it is expected that dynamic coupling will occur between the crane and the Core Stage. Therefore, a separate modal test was performed on the B2 crane itself, in order to evaluate the varying dynamic characteristics and correlate math models of the crane. Performing a modal test on such a massive structure was challenging and required creative test setup and procedures, including implementing both AC and DC accelerometers, and performing both classical hammer and operational modal analysis. This paper describes the logistics required to perform this large-scale test, as well as details of the test setup, the modal test methods used, and an overview and application of the results.

  9. Performing a Large-Scale Modal Test on the B2 Stand Crane at NASA's Stennis Space Center

    NASA Technical Reports Server (NTRS)

    Stasiunas, Eric C.; Parks, Russel A.

    2018-01-01

    A modal test of NASA’s Space Launch System (SLS) Core Stage is scheduled to occur prior to propulsion system verification testing at the Stennis Space Center B2 test stand. A derrick crane with a 180-ft long boom, located at the top of the stand, will be used to suspend the Core Stage in order to achieve defined boundary conditions. During this suspended modal test, it is expected that dynamic coupling will occur between the crane and the Core Stage. Therefore, a separate modal test was performed on the B2 crane itself, in order to evaluate the varying dynamic characteristics and correlate math models of the crane. Performing a modal test on such a massive structure was challenging and required creative test setup and procedures, including implementing both AC and DC accelerometers, and performing both classical hammer and operational modal analysis. This paper describes the logistics required to perform this large-scale test, as well as details of the test setup, the modal test methods used, and an overview of the results.

  10. Do Bat Gantries and Underpasses Help Bats Cross Roads Safely?

    PubMed Central

    Berthinussen, Anna; Altringham, John

    2012-01-01

    Major roads can reduce bat abundance and diversity over considerable distances. To mitigate against these effects and comply with environmental law, many European countries install bridges, gantries or underpasses to make roads permeable and safer to cross. However, through lack of appropriate monitoring, there is little evidence to support their effectiveness. Three underpasses and four bat gantries were investigated in northern England. Echolocation call recordings and observations were used to determine the number of bats using underpasses in preference to crossing the road above, and the height at which bats crossed. At gantries, proximity to the gantry and height of crossing bats were measured. Data were compared to those from adjacent, severed commuting routes that had no crossing structure. At one underpass 96% of bats flew through it in preference to crossing the road. This underpass was located on a pre-construction commuting route that allowed bats to pass without changing flight height or direction. At two underpasses attempts to divert bats from their original commuting routes were unsuccessful and bats crossed the road at the height of passing vehicles. Underpasses have the potential to allow bats to cross roads safely if built on pre-construction commuting routes. Bat gantries were ineffective and used by a very small proportion of bats, even up to nine years after construction. Most bats near gantries crossed roads along severed, pre-construction commuting routes at heights that put them in the path of vehicles. Crossing height was strongly correlated with verge height, suggesting that elevated verges may have some value in mitigation, but increased flight height may be at the cost of reduced permeability. Green bridges should be explored as an alternative form of mitigation. Robust monitoring is essential to assess objectively the case for mitigation and to ensure effective mitigation. PMID:22719941

  11. 29 CFR 1926.1440 - Sideboom cranes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Sideboom cranes. 1926.1440 Section 1926.1440 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1440 Sideboom cranes. (a) The provisions of this standard apply, except § 1926.1402 (Ground conditions), § 1926...

  12. 46 CFR 109.439 - Crane certificates.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Crane certificates. 109.439 Section 109.439 Shipping... Reports, Notifications, and Records Records § 109.439 Crane certificates. The master or person in charge shall insure that the following certificates and records for each crane are maintained on the unit: (a...

  13. 46 CFR 109.439 - Crane certificates.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane certificates. 109.439 Section 109.439 Shipping... Reports, Notifications, and Records Records § 109.439 Crane certificates. The master or person in charge shall insure that the following certificates and records for each crane are maintained on the unit: (a...

  14. Head stabilization in whooping cranes

    USGS Publications Warehouse

    Kinloch, M.R.; Cronin, T.W.; Olsen, Glenn H.; Chavez-Ramirez, Felipe

    2005-01-01

    The whooping crane (Grus americana) is the tallest bird in North America, yet not much is known about its visual ecology. How these birds overcome their unusual height to identify, locate, track, and capture prey items is not well understood. There have been many studies on head and eye stabilization in large wading birds (herons and egrets), but the pattern of head movement and stabilization during foraging is unclear. Patterns of head movement and stabilization during walking were examined in whooping cranes at Patuxent Wildlife Research Center, Laurel, Maryland USA. Four whooping cranes (1 male and 3 females) were videotaped for this study. All birds were already acclimated to the presence of people and to food rewards. Whooping cranes were videotaped using both digital and Hi-8 Sony video cameras (Sony Corporation, 7-35 Kitashinagawa, 6-Chome, Shinagawa-ku, Tokyo, Japan), placed on a tripod and set at bird height in the cranes' home pens. The cranes were videotaped repeatedly, at different locations in the pens and while walking (or running) at different speeds. Rewards (meal worms, smelt, crickets and corn) were used to entice the cranes to walk across the camera's view plane. The resulting videotape was analyzed at the University of Maryland at Baltimore County. Briefly, we used a computerized reduced graphic model of a crane superimposed over each frame of analyzed tape segments by means of a custom written program (T. W. Cronin, using C++) with the ability to combine video and computer graphic input. The speed of the birds in analyzed segments ranged from 0.30 m/s to 2.64 m/s, and the proportion of time the head was stabilized ranged from 79% to 0%, respectively. The speed at which the proportion reached 0% was 1.83 m/s. The analyses suggest that the proportion of time the head is stable decreases as speed of the bird increases. In all cases, birds were able to reach their target prey with little difficulty. Thus when cranes are walking searching for food

  15. Lunar crane hook

    NASA Technical Reports Server (NTRS)

    Cash, John Wilson, III; Cone, Alan E.; Garolera, Frank J.; German, David; Lindabury, David Peter; Luckado, Marshall Cleveland; Murphey, Craig; Rowell, John Bryan; Wilkinson, Brad

    1988-01-01

    The base and ball hook system is an attachment that is designed to be used on the lunar surface as an improved alternative to the common crane hook and eye system. The design proposed uses an omni-directional ball hook and base to overcome the design problems associated with a conventional crane hook. The base and ball hook is not sensitive to cable twist which would render a robotic lunar crane useless since there is little atmospheric resistance to dampen the motion of an oscillating member. The symmetric characteristics of the ball hook and base eliminates manual placement of the ball hook into the base; commonly associated with the typical hook and eye stem. The major advantage of the base and ball hook system is it's ease of couple and uncouple modes that are advantages during unmanned robotic lunar missions.

  16. Crane and Excavator Operator.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on crane and excavator operation is designed to enable the crane and excavator operator to perform his/her duties more proficiently. Introductory materials include specific information for MCI students, a course introduction, and a study guide…

  17. Molecular characterization of crane Coccidia, Eimeria gruis and E. reichenowi, found in feces of migratory cranes.

    PubMed

    Matsubayashi, Makoto; Takami, Kazutoshi; Abe, Niichiro; Kimata, Isao; Tani, Hiroyuki; Sasai, Kazumi; Baba, Eiichiroh

    2005-08-01

    Eimeria gruis and E. reichenowi have lethal pathogenicity to a number of species of cranes. These parasites develop at multiple organs or tissues in infected cranes, thus lacking the specificity of infection sites shown by other Eimeria spp. in spite of morphologic similarity. To date, there have been many reports of crane Eimeria infections, however, genetic examinations of these parasites have never been published. In the present study, we isolated oocysts of E. gruis and E. reichenowi from crane feces at a wintering area in Japan. By phylogenic analysis, we first demonstrated that partial sequences of the isolates formed their own cluster, located separately from other Eimeria spp.

  18. Cranes and Crops: Investigating Farmer Tolerances toward Crop Damage by Threatened Blue Cranes (Anthropoides paradiseus) in the Western Cape, South Africa.

    PubMed

    van Velden, Julia L; Smith, Tanya; Ryan, Peter G

    2016-12-01

    The Western Cape population of Blue Cranes (Anthropoides paradiseus) in South Africa is of great importance as the largest population throughout its range. However, Blue Cranes are strongly associated with agricultural lands in the Western Cape, and therefore may come into conflict with farmers who perceive them as damaging to crops. We investigated the viability of this population by exploring farmer attitudes toward crane damage in two regions of the Western Cape, the Swartland and Overberg, using semi-structured interviews. Perceptions of cranes differed widely between regions: farmers in the Swartland perceived crane flocks to be particularly damaging to the feed crop sweet lupin (65 % of farmers reported some level of damage by cranes), and 40 % of these farmers perceived cranes as more problematic than other common bird pests. Farmers in the Overberg did not perceive cranes as highly damaging, although there was concern about cranes eating feed at sheep troughs. Farmers who had experienced large flocks on their farms and farmers who ranked cranes as more problematic than other bird pests more often perceived cranes to be damaging to their livelihoods. Biographical variables and crop profiles could not be related to the perception of damage, indicating the complexity of this human-wildlife conflict. Farmers' need for management alternatives was related to the perceived severity of damage. These results highlight the need for location-specific management solutions to crop damage by cranes, and contribute to the management of this vulnerable species.

  19. Cranes and Crops: Investigating Farmer Tolerances toward Crop Damage by Threatened Blue Cranes ( Anthropoides paradiseus) in the Western Cape, South Africa

    NASA Astrophysics Data System (ADS)

    van Velden, Julia L.; Smith, Tanya; Ryan, Peter G.

    2016-12-01

    The Western Cape population of Blue Cranes ( Anthropoides paradiseus) in South Africa is of great importance as the largest population throughout its range. However, Blue Cranes are strongly associated with agricultural lands in the Western Cape, and therefore may come into conflict with farmers who perceive them as damaging to crops. We investigated the viability of this population by exploring farmer attitudes toward crane damage in two regions of the Western Cape, the Swartland and Overberg, using semi-structured interviews. Perceptions of cranes differed widely between regions: farmers in the Swartland perceived crane flocks to be particularly damaging to the feed crop sweet lupin (65 % of farmers reported some level of damage by cranes), and 40 % of these farmers perceived cranes as more problematic than other common bird pests. Farmers in the Overberg did not perceive cranes as highly damaging, although there was concern about cranes eating feed at sheep troughs. Farmers who had experienced large flocks on their farms and farmers who ranked cranes as more problematic than other bird pests more often perceived cranes to be damaging to their livelihoods. Biographical variables and crop profiles could not be related to the perception of damage, indicating the complexity of this human-wildlife conflict. Farmers' need for management alternatives was related to the perceived severity of damage. These results highlight the need for location-specific management solutions to crop damage by cranes, and contribute to the management of this vulnerable species.

  20. Contamination Status of Seven Elements in Hooded Cranes Wintering in South-West Kyushu, Japan: Comparison with Red-Crowned Cranes in Hokkaido, Japan.

    PubMed

    Teraoka, Hiroki; Miyagi, Hasumi; Haraguchi, Yuko; Takase, Kozo; Kitazawa, Takio; Noda, Jun

    2018-05-31

    The hooded crane is designated as an endangered species. The cranes breed primarily in wetlands in southeast Russia and China in summer. Most of the hooded crane population winters in the Izumi plain in Japan. It is difficult to know the contamination status of their habitat because of their vast breeding area. We determined the levels of Cd, Pb, As, (total) Hg, Se, Zn, and Cu in the liver, kidney, and muscle of hooded cranes that were found dead in Izumi in the periods 2003-2006 and 2014-2015 compared with the levels in red-crowned cranes in Hokkaido, Japan, as the only cranes in which these elements had been studied extensively. There were no notable differences between levels of the seven elements in the two periods. Overall, tissue levels of the elements examined in hooded cranes were comparable to those in red-crowned cranes except for Hg and Se. Tissue levels of Hg and Se were clearly lower in hooded cranes than in red-crowned cranes that were found dead from 2000. One lead poisoning case was confirmed. The results suggest that Hooded cranes wintering in Izumi are not extensively contaminated with the seven elements examined.

  1. Disseminated visceral coccidiosis in whooping cranes

    USGS Publications Warehouse

    Carpenter, J.W.; Spraker, T.R.; Novilla, M.N.

    1980-01-01

    Three 13- to 18-day-old whooping cranes (Grus americana) and a 9-year-old whooping crane died in outdoor pens at the Patuxent Wildlife Research Center. The deaths were associated with an overwhelming systemic infection by an intracellular protozoan parasite, which resulted in enteritis, granulomatous bronchopneumonia, hepatitis, splenitis, and myocarditis. The clinical, histopathologic, and electron microscopic findings were similar to those in sandhill cranes (Grus canadensis) at the Patuxent Center found to be infected with Eimeria reichenowi and E gruis. Since these eimerian species also parasitize wild whooping cranes, this parasite might be an important pathogenic agent for this species.

  2. Genome sizes of cranes (Aves: Gruiformes).

    PubMed

    Rasch, Ellen M

    2006-12-01

    The DNA content of blood cell nuclei of 15 species of cranes was determined by Feulgen-DNA cytophotometry. Genome sizes agree with values reported elsewhere for several crane species analyzed by flow cytometry. Males have more DNA per cell than females in several species. A karyotype where 2n = 80 is reported for a male greater sandhill crane. Copyright 2006 Wiley-Liss, Inc.

  3. SU-D-201-01: Attenuation of PET/CT Gantries with 511 KeV Photons

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Busse, N

    2015-06-15

    Purpose: PET shielding requires the use of large amounts of lead because of the penetrating nature of 511 keV photons. While the uptake rooms generally require the thickest lead, the scan room often requires substantial shielding. Attenuation by the PET/CT gantry is normally assumed to be zero, but may be significant in directions perpendicular to the scanner axis. Methods: A 5 mL tube was filled with between 14.7 and 20.5 mCi of F-18 and inserted into a phantom (70 cm NEMA PET Scatter Phantom). Exposure rates were recorded at several distances and 15° intervals with a pressurized ionization chamber (Ludlummore » 9DP) both with the phantom outside the gantry and centered in the CT and PET acquisition positions. These measurements were repeated with three scanners: Siemens Biograph TruePoint 6, GE Optima 560, and Philips Gemini 64. Measurements were decay corrected and normalized to exposure rates outside the gantry to calculate percent transmission. Results: Between 45° to 135° (measured from the patient bed at 0°), average transmission was about 20% for GE, 35% for Philips, and 30% for Siemens. The CT gantry was roughly twice as attenuating as the PET gantry at 90° for all three manufacturers, with about 10% transmission through the CT gantry and 20% through the PET gantry. Conclusion: The Philips system is a split-gantry and therefore has a narrower angle of substantial attenuation. For the GE and Siemens systems, which are single-gantry design, transmission was relatively constant once the angle was sufficient to block line-of-sight from the phantom. While the patient may spend a greater fraction of time at the PET position of the scanner, transmission characteristics of the two components are similar enough to be treated collectively. For shielding angles between 45° and 135°, a reasonably conservative assumption would be to assume gantry transmission of 50%.« less

  4. View northnorthwest of turret shed (building 56), at right of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View north-northwest of turret shed (building 56), at right of photograph. Electrical and electronics facility (building 1000) located south of drydock no. 2. The gantry crane and its supporting structure (left foreground) was used to load assembled gun turrets onto barges moored in the barge basin under the gantry structure. After loading on a crane on pier 4 and lifted into positioned on a battleship or cruiser. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Drydock No. 2, League Island, Philadelphia, Philadelphia County, PA

  5. A novel beam optics concept in a particle therapy gantry utilizing the advantages of superconducting magnets.

    PubMed

    Gerbershagen, Alexander; Meer, David; Schippers, Jacobus Maarten; Seidel, Mike

    2016-09-01

    A first order design of the beam optics of a superconducting proton therapy gantry beam is presented. The possibilities of superconducting magnets with respect to the beam optics such as strong fields, large apertures and superposition of different multipole fields have been exploited for novel concepts in a gantry. Since various techniques used in existing gantries have been used in our first design steps, some examples of the existing superconducting gantry designs are described and the necessary requirements of such a gantry are explained. The study of a gantry beam optics design is based on superconducting combined function magnets. The simulations have been performed in first order with the conventional beam transport codes. The superposition of strong dipole and quadrupole fields generated by superconducting magnets enables the introduction of locally achromatic bending sections without increasing the gantry size. A rigorous implementation of such beam optics concepts into the proposed gantry design dramatically increases the momentum acceptance compared to gantries with normal conducting magnets. In our design this large acceptance has been exploited by the implementation of a degrader within the gantry and a potential possibility to use the same magnetic field for all energies used in a treatment, so that the superconducting magnets do not have to vary their fields during a treatment. This also enables very fast beam energy changes, which is beneficial for spreading the Bragg peak over the thickness of the tumor. The results show an improvement of its momentum acceptance. Large momentum acceptance in the gantry creates a possibility to implement faster dose application techniques. Copyright © 2016. Published by Elsevier GmbH.

  6. SU-F-T-177: Impacts of Gantry Angle Dependent Scanning Beam Properties for Proton Treatment

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lin, Y; Clasie, B; Lu, H

    Purpose: In pencil beam scanning (PBS), the delivered spot MU, position and size are slightly different at different gantry angles. We investigated the level of delivery uncertainty at different gantry angles through a log file analysis. Methods: 34 PBS fields covering full 360 degrees gantry angle spread were collected retrospectively from 28 patients treated at our institution. All fields were delivered at zero gantry angle and the prescribed gantry angle, and measured at isocenter with the MatriXX 2D array detector at the prescribed gantry angle. The machine log files were analyzed to extract the delivered MU per spot and themore » beam position from the strip ionization chambers in the treatment nozzle. The beam size was separately measured as a function of gantry angle and beam energy. Using this information, the dose was calculated in a water phantom at both gantry angles and compared to the measurement using the 3D γ-index at 2mm/2%. Results: The spot-by-spot difference between the beam position in the log files from the delivery at the two gantry angles has a mean of 0.3 and 0.4 mm and a standard deviation of 0.6 and 0.7 mm for × and y directions, respectively. Similarly, the spot-by-spot difference between the MU in the log files from the delivery at the two gantry angles has a mean 0.01% and a standard deviation of 0.7%. These small deviations lead to an excellent agreement in dose calculations with an average γ pass rate for all fields being approximately 99.7%. When each calculation is compared to the measurement, a high correlation in γ was also found. Conclusion: Using machine logs files, we verified that PBS beam delivery at different gantry angles are sufficiently small and the planned spot position and MU. This study brings us one step closer to simplifying our patient-specific QA.« less

  7. Crane cabins' interior space multivariate anthropometric modeling.

    PubMed

    Essdai, Ahmed; Spasojević Brkić, Vesna K; Golubović, Tamara; Brkić, Aleksandar; Popović, Vladimir

    2018-01-01

    Previous research has shown that today's crane cabins fail to meet the needs of a large proportion of operators. Performance and financial losses and effects on safety should not be overlooked as well. The first aim of this survey is to model the crane cabin interior space using up-to-date crane operator anthropometric data and to compare the multivariate and univariate method anthropometric models. The second aim of the paper is to define the crane cabin interior space dimensions that enable anthropometric convenience. To facilitate the cabin design, the anthropometric dimensions of 64 crane operators in the first sample and 19 more in the second sample were collected in Serbia. The multivariate anthropometric models, spanning 95% of the population on the basis of a set of 8 anthropometric dimensions, have been developed. The percentile method was also used on the same set of data. The dimensions of the interior space, necessary for the accommodation of the crane operator, are 1174×1080×1865 mm. The percentiles results for the 5th and 95th model are within the obtained dimensions. The results of this study may prove useful to crane cabin designers in eliminating anthropometric inconsistencies and improving the health of operators, but can also aid in improving the safety, performance and financial results of the companies where crane cabins operate.

  8. Control strategies for crane systems: A comprehensive review

    NASA Astrophysics Data System (ADS)

    Ramli, Liyana; Mohamed, Z.; Abdullahi, Auwalu M.; Jaafar, H. I.; Lazim, Izzuddin M.

    2017-10-01

    Crane systems are tremendously utilised in numerous heavy load transportation industries, and therefore, the control of crane systems is a well-established research field. As the last review paper was published more than a decade ago, there is a lack of collected and organised information regarding the latest and the newest updates on control strategies for crane control systems. Hence, this paper presents a comprehensive review of crane control strategies discussing the latest research works during the years from 2000 to 2016. Various crane types and control issues are highlighted, followed by the main focus of this paper, an extensive review of the control schemes for diverse types of crane systems that have been carried out in the 21st century. A brief review on modelling of single-pendulum and double-pendulum crane systems is also given. In addition, anti-sway control systems for industrial cranes that are available on the market is described. This paper summarises most of the related work and also pays a special focus on research trends regarding the control of crane systems that have been previously published in the literature. It is envisaged that this review paper will be helpful to new researchers when identifying research directions for this particular area of interest.

  9. Evaluating the four-dimensional cone beam computed tomography with varying gantry rotation speed

    PubMed Central

    Maria Das, K J; Mohamed Ali, Shajahan; Agarwal, Arpita; Mishra, Surendra P; Kumar, Shaleen

    2016-01-01

    Objective: The purpose of this work was to evaluate the four-dimensional cone beam CT (4DCBCT) imaging with different gantry rotation speed. Methods: All the 4DCBCT image acquisitions were carried out in Elekta XVI Symmetry™ system (Elekta AB, Stockholm, Sweden). A dynamic thorax phantom with tumour mimicking inserts of diameter 1, 2 and 3 cm was programmed to simulate the respiratory motion (4 s) of the target. 4DCBCT images were acquired with different gantry rotation speeds (36°, 50°, 75°, 100°, 150° and 200° min−1). Owing to the technical limitation of 4DCBCT system, average cone beam CT (CBCT) images derived from the 10 phases of 4DCBCT were used for the internal target volume (ITV) contouring. ITVs obtained from average CBCT were compared with the four-dimensional CT (4DCT). In addition, the image quality of 4DCBCT was also evaluated for various gantry rotation speeds using Catphan® 600 (The Phantom Laboratory Inc., Salem, NY). Results: Compared to 4DCT, the average CBCT underestimated the ITV. The ITV deviation increased with increasing gantry speed (−10.8% vs −17.8% for 36° and 200° min−1 in 3-cm target) and decreasing target size (−17.8% vs −26.8% for target diameter 3 and 1 cm in 200° min−1). Similarly, the image quality indicators such as spatial resolution, contrast-to-noise ratio and uniformity also degraded with increasing gantry rotation speed. Conclusion: The impact of gantry rotation speed has to be considered when using 4DCBCT for ITV definition. The phantom study demonstrated that 4DCBCT with slow gantry rotation showed better image quality and less ITV deviation. Advances in knowledge: Usually, the gantry rotation period of Elekta 4DCBCT system is kept constant at 4 min (50° min−1) for acquisition, and any attempt of decreasing/increasing the acquisition duration requires careful investigation. In this study, the 4DCBCT images with different gantry rotation speed were evaluated. PMID:26916281

  10. 46 CFR 109.525 - Cranes: Working loads.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

  11. 46 CFR 109.525 - Cranes: Working loads.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

  12. 46 CFR 109.525 - Cranes: Working loads.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

  13. 46 CFR 109.525 - Cranes: Working loads.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

  14. 46 CFR 109.525 - Cranes: Working loads.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Cranes: Working loads. 109.525 Section 109.525 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Cranes § 109.525 Cranes: Working loads. The master or person in charge shall ensure that tables...

  15. Efficacy of eastern encephalitis immunization in whooping cranes

    USGS Publications Warehouse

    Olsen, Glenn H.; Turell, M.J.; Pagac, B.B.

    1997-01-01

    An epizootic of eastern equine encephalitis (EEE) at the Patuxent Wildlife Research Center (PWRC), Laurel, Maryland (USA), in 1989 provided an opportunity to determine if EEE immunization protected whooping cranes (Grus americana). Based on seroconversion of 31 % of sympatric hatch-year sandhill cranes, Grus canadensis, and a previous 35% case fatality rate in whooping cranes, 17 (37%) of the 46 susceptible whooping cranes should have been exposed to virus and six should have died. As there were no deaths in these birds, the EEE vaccination program appeared to be efficacious in this whooping crane population.

  16. 46 CFR 109.437 - Crane record book.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

  17. 46 CFR 109.437 - Crane record book.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

  18. 46 CFR 109.437 - Crane record book.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

  19. 46 CFR 109.437 - Crane record book.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

  20. 46 CFR 109.437 - Crane record book.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Crane record book. 109.437 Section 109.437 Shipping... Reports, Notifications, and Records Records § 109.437 Crane record book. The master or person in charge shall ensure that the following are maintained in a crane record book: (a) Descriptive information which...

  1. Natural fertility in whooping cranes and Mississippi sandhill cranes at Patuxent Wildlife Research Center

    USGS Publications Warehouse

    Nicolich, Jane M.; Gee, G.F.; Ellis, D.H.; Hereford, Scott G.

    2001-01-01

    The first fertile whooping crane (Grus americana; WC) egg produced through natural breeding at Patuxent Wildlife Research Center (Patuxent) was laid in 1991. Prior to that time, all fertile whooping crane eggs were the result of artificial insemination. Since 1991, eight different whooping crane pairs at Patuxent have produced fertile eggs through natural breeding. Mean fertility averages over years for each pair range from 40% to 93%. Fertility rates for each pair also vary greatly between years, from 0% to 100% but the causes of the variance are unknown. Experiences with natural fertility in Mississippi sandhill cranes (G. canadensis pulla; MSC) have been similar. Annual natural fertility rates averaged from 21% to 89% and fertility averages for each of 7 pairs also varied greatly between years. Rearing methods have not determined success in natural breeding for either species. Both hand-reared and parent-reared pairs have been fertile. Wing condition, however, has been an important factor affecting natural fertility. Becausce artificial insemination (AI) generally results in higher fertility rates than natural breeding, Al should continue for some pairs.

  2. Host–parasite behavioral interactions in a recently introduced, whooping crane population

    USGS Publications Warehouse

    King, Richard S.; McKann, Patrick C.; Gray, Brian R.; Putnam, Michael S.

    2015-01-01

    The whooping crane Grus americana has a long conservation history, but despite multiple attempts across North America, introduction success is lacking. Recently introduced, captively reared whooping cranes have had periods of poor reproductive performance in central Wisconsin that sometimes coincided with black fly (Diptera: Simuliidae) emergences. Sandhill crane Grus canadensis reproductive performance in central Wisconsin is approximately double that of whooping cranes. We used comfort behaviors as a measure of black fly harassment to infer whether behavioral differences existed between nesting sandhill cranes and nesting whooping cranes and between successful and unsuccessful whooping crane pairs. To further explore the interaction between black flies and incubating whooping cranes, we examined differences in behaviors between incubating birds and their off-nest mates. Compared to their off-nest mates, incubating whooping cranes exhibited elevated comfort behaviors, suggesting a bird at a nest may experience greater harassment from black flies. Sandhill cranes had elevated head-flicks over whooping cranes. Whooping cranes exhibited more head-rubs than sandhill cranes, and successful whooping crane pairs had elevated head-rubs over pairs that deserted their nests. Behavioral differences between sandhill cranes and whooping cranes as well as differences in reproductive performance, could be explained by exposure to local breeding conditions. Whereas sandhill cranes have nested in the area for hundreds, if not thousands, of years, whooping cranes were only recently introduced to the area. Behavioral differences between the species as well as those between successful and unsuccessful whooping crane pairs could also be explained by the effect of captive exposure, which could affect all whooping crane introductions.

  3. Use of ultralight aircraft for introducing migratory crane populations

    USGS Publications Warehouse

    Clegg, K.R.; Lewis, J.C.; Ellis, D.H.; Urbanek, Richard P.; Stahlecker, Dale

    1997-01-01

    Objectives were to determine if captive-reared cranes could be led behind an ultralight aircraft (UL) along a migration route and, if after release on a wintering area, they would integrate with wild cranes and migrate north in spring to their natal area without assistance. Greater sandhill cranes (Grus canadensis tabida) were used as the research surrogate for whooping cranes (Grus americana). In 1995, the senior author raised 15 cranes to fledging and trained them to respond to his vocal imitation of a sandhill crane brood call. Chicks learned to follow him as he walked, drove an all-terrain vehicle (ATV), or piloted an UL. The caretakers were not in crane costumes. Cranes were tame but allowed to roam at will without accompanying humans part of the day and were penned at night. Daily excursions provided exposure to habitats, foods, and predators the birds would encounter after release into the wild. In mid-October 1995, 11 radio-tagged cranes were led in migration from Grade, Idaho to Bosque del Apache National Wildlife Refuge (BdANWR), central New Mexico, and released near wild wintering sandhill cranes. The 1,204km migration took 11 days, including 1 day when the aircraft were grounded due to a winter storm. Hazards encountered enroute included mountainous terrain, turbulent air, and attacks by gold eagles (Aquila chrysaetos). On the wintering ground, hazards included crane hunters and coyotes (Canis latrans). Within 2 days after release at the BdANWR wintering site, the research cranes were associating with and imitating the behavior of wild cranes. The 4 surviving birds migrated north in spring 1996 and at the time of this writing 2 were within 53 km of their natal area in Idaho.

  4. Inclusion body disease of cranes

    USGS Publications Warehouse

    Docherty, D.E.

    1999-01-01

    In March 1978, a previously unidentified herpesvirus was isolated at the National Wildlife Health Center (NWHC) from a die-off of captive cranes housed at the International Crane Foundation (ICF) in Baraboo, Wisconsin. Serological testing of this virus against other previously isolated avian herpesviruses does not result in cross-reactions, thereby supporting this agent’s status as a distinctly new virus. The NWHC assigned the descriptive name, “inclusion body disease of cranes” (IBDC) to this disease when reporting the outbreak in the scientific literature, because the disease is characterized by microscopic inclusions in cell nuclei throughout the liver and spleen.Very little is known about how this disease is transmitted. As with duck plague and avian cholera, outbreaks are thought to be initiated by disease carriers within a population of birds. The disease likely spreads by direct contact between infected birds and other susceptible birds and by contact with a virus-contaminated environment. Findings of antibody in sera of cranes bled nearly 3 years before the deaths at ICF indicates that the IBDC virus can be maintained in a captive crane population for at least 2 years and 8 months without causing mortality. The IBDC virus has been isolated from the cloaca of antibody-positive cranes, which indicates the potential for fecal shedding of the virus.

  5. Detection and correction for EPID and gantry sag during arc delivery using cine EPID imaging

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rowshanfarzad, Pejman; Sabet, Mahsheed; O'Connor, Daryl J.

    2012-02-15

    Purpose: Electronic portal imaging devices (EPIDs) have been studied and used for pretreatment and in-vivo dosimetry applications for many years. The application of EPIDs for dosimetry in arc treatments requires accurate characterization of the mechanical sag of the EPID and gantry during rotation. Several studies have investigated the effects of gravity on the sag of these systems but each have limitations. In this study, an easy experiment setup and accurate algorithm have been introduced to characterize and correct for the effect of EPID and gantry sag during arc delivery. Methods: Three metallic ball bearings were used as markers in themore » beam: two of them fixed to the gantry head and the third positioned at the isocenter. EPID images were acquired during a 360 deg. gantry rotation in cine imaging mode. The markers were tracked in EPID images and a robust in-house developed MATLAB code was used to analyse the images and find the EPID sag in three directions as well as the EPID + gantry sag by comparison to the reference gantry zero image. The algorithm results were then tested against independent methods. The method was applied to compare the effect in clockwise and counter clockwise gantry rotations and different source-to-detector distances (SDDs). The results were monitored for one linear accelerator over a course of 15 months and six other linear-accelerators from two treatment centers were also investigated using this method. The generalized shift patterns were derived from the data and used in an image registration algorithm to correct for the effect of the mechanical sag in the system. The Gamma evaluation (3%, 3 mm) technique was used to investigate the improvement in alignment of cine EPID images of a fixed field, by comparing both individual images and the sum of images in a series with the reference gantry zero image. Results: The mechanical sag during gantry rotation was dependent on the gantry angle and was larger in the in-plane direction

  6. Book review: Sandhill and whooping cranes: Ancient voices over America's wetlands

    USGS Publications Warehouse

    Austin, Jane E.

    2011-01-01

    Paul Johnsgard has long been captivated by wild cranes and their unique vocalizations, courtship dances, and wide-ranging migrations. As a scientist and an admirer, Johnsgard has watched their migrations and behaviors for decades as hundreds of thousands of cranes staged each spring by the central Platte River, not far from his home in Lincoln, Nebraska. As an artist, he has skilfully captured their courtship dances and other behaviours in his exceptional line drawings. And, as an author, he has written extensively on their ecology in three earlier books: Cranes of the World (1983), Those of the Gray Wind: the Sandhill Crane (1986), and Crane Music: a Natural History of Cranes (1991). Much has happened relative to North American cranes in the 20 years since Johnsgard published Crane Music, including increased crane abundance in many areas and the completion of multiple studies on crane ecology and conservation. This new crane book serves as an update to Crane Music and provides the reader with many useful resources for observing and learning about cranes.

  7. A Historical Analysis of Crane Mishaps at Kennedy Space Center

    NASA Technical Reports Server (NTRS)

    Wolfe, Crystal

    2014-01-01

    Cranes and hoists are widely used in many areas. Crane accidents and handling mishaps are responsible for injuries, costly equipment damage, and program delays. Most crane accidents are caused by preventable factors. Understanding these factors is critical when designing cranes and preparing lift plans. Analysis of previous accidents provides insight into current recommendations for crane safety. Cranes and hoists are used throughout Kennedy Space Center to lift everything from machine components to critical flight hardware. Unless they are trained crane operators, most NASA employees and contractors do not need to undergo specialized crane training and may not understand the safety issues surrounding the use of cranes and hoists. A single accident with a crane or hoist can injure or kill people, cause severe equipment damage, and delay or terminate a program. Handling mishaps can also have a significant impact on the program. Simple mistakes like bouncing or jarring a load, or moving the crane down when it should go up, can damage fragile flight hardware and cause major delays in processing. Hazardous commodities (high pressure gas, hypergolic propellants, and solid rocket motors) can cause life safety concerns for the workers performing the lifting operations. Most crane accidents are preventable with the correct training and understanding of potential hazards. Designing the crane with human factors taken into account can prevent many accidents. Engineers are also responsible for preparing lift plans where understanding the safety issues can prevent or mitigate potential accidents. Cranes are widely used across many areas of KSC. Failure of these cranes often leads to injury, high damage costs, and significant delays in program objectives. Following a basic set of principles and procedures during design, fabrication, testing, regular use, and maintenance can significantly minimize many of these failures. As the accident analysis shows, load drops are often caused

  8. High gantry for lifting and handling

    NASA Technical Reports Server (NTRS)

    Kerley, J. J., Jr.; Tereniak, W. T.

    1977-01-01

    Standard gantry has been inexpensively modified with standard pipes to allow lifting of heavy loads to distances between 14 and 30 ft. Addition of air mounts permits extensive and sensitive equipment to be moved smoothly and safely over smooth or moderately rough surfaces. Unit has been tested at 6000 pounds without yielding.

  9. Sandhill crane with baby

    NASA Technical Reports Server (NTRS)

    2000-01-01

    A Sandhill Crane searches for food with its still-fuzzy fledgling by its side. The two, along with another adult crane, have been seen wandering the grassy areas in the KSC Launch Complex 39 area. Sandhill cranes range from Siberia, Alaska and Arctic islands to Michigan, Minnesota and California; from Florida to Texas. They prefer large freshwater marshes, prairie ponds and marshy tundra. KSC shares a boundary with the Merritt Island National Wildlife Refuge, which encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects.

  10. Protein electrophoresis in cranes with presumed insect bite.

    PubMed

    Hartup, Barry K; Schroeder, Carrie A

    2006-06-01

    Serum protein electrophoresis (SPE) has emerged as a potentially valuable diagnostic tool in avian medicine; yet, there is limited information regarding SPE in cranes. Since 2000, 20 cases of unilateral periocular or facial soft tissue swelling, blepharitis, feather loss, and ocular or nasal discharge attributed to insect bite hypersensitivity were observed in cranes from a captive breeding center. SPE may be useful for evaluating these lesions. The aim of this study was to characterize the inflammatory response in cranes with hypersensitivity reactions using SPE. Serum samples from 7 cranes diagnosed with hypersensitivity reactions were submitted to a diagnostic laboratory for agarose gel electrophoresis. Results were compared to those in control serum samples obtained from the same cranes during routine physical examination, when they were clinically healthy. Total protein and a- and g-globulin concentrations were significantly increased and albumin/globulin ratios were significantly decreased in serum samples from cranes with hypersensitivity lesions compared with control samples. Using SPE, we documented changes in protein fraction concentrations in cranes with clinical signs of hypersensitivity. The increase in alpha- and gamma-globulin concentrations suggested inflammation and antigenic stimulation, consistent with a Type I hypersensitivity reaction.

  11. Design and Test Results of Superconducting Magnet for Heavy-Ion Rotating Gantry

    NASA Astrophysics Data System (ADS)

    Takayama, S.; Koyanagi, K.; Miyazaki, H.; Takami, S.; Orikasa, T.; Ishii, Y.; Kurusu, T.; Iwata, Y.; Noda, K.; Obana, T.; Suzuki, K.; Ogitsu, T.; Amemiya, N.

    2017-07-01

    Heavy-ion radiotherapy has a high curative effect in cancer treatment and also can reduce the burden on patients. These advantages have been generally recognized. Furthermore, a rotating gantry can irradiate a tumor with ions from any direction without changing the position of the patient. This can reduce the physical dose on normal cells, and is thus commonly used in proton radiotherapy. However, because of the high magnetic rigidity of carbon ions, the weight of the rotating gantry for heavy-ion therapy is about three-times heavier than those used for proton cancer therapy, according to our estimation. To overcome this issue, we developed a small and lightweight rotating gantry in collaboration with the National Institute of Radiological Sciences (NIRS). The compact rotating gantry was composed of ten low-temperature superconducting (LTS) magnets that were designed from the viewpoint of beam optics. These LTS magnets have a surface-winding coil-structure and provide both dipole and quadrupole fields. The maximum dipole and quadrupole magnetic field of the magnets were 2.88 T and 9.3 T/m, respectively. The rotating gantry was installed at NIRS, and beam commissioning is in progress to achieve the required beam quality. In the three years since 2013, in a project supported by the Ministry of Economy, Trade and Industry (METI) and the Japan Agency for Medical Research and Development (AMED), we have been developing high-temperature superconducting (HTS) magnets with the aim of a further size reduction of the rotating gantry. To develop fundamental technologies for designing and fabricating HTS magnets, a model magnet was manufactured. The model magnet was composed of 24 saddle-shaped HTS coils and generated a magnetic field of 1.2 T. In the presentation, recent progress in this research will be reported.

  12. Research on carrying capacity of hydrostatic slideway on heavy-duty gantry CNC machine

    NASA Astrophysics Data System (ADS)

    Cui, Chao; Guo, Tieneng; Wang, Yijie; Dai, Qin

    2017-05-01

    Hydrostatic slideway is a key part in the heavy-duty gantry CNC machine, which supports the total weight of the gantry and moves smoothly along the table. Therefore, the oil film between sliding rails plays an important role on the carrying capacity and precision of machine. In this paper, the oil film in no friction is simulated with three-dimensional CFD. The carrying capacity of heavy hydrostatic slideway, pressure and velocity characteristic of the flow field are analyzed. The simulation result is verified through comparing with the experimental data obtained from the heavy-duty gantry machine. For the requirement of engineering, the oil film carrying capacity is analyzed with simplified theoretical method. The precision of the simplified method is evaluated and the effectiveness is verified with the experimental data. The simplified calculation method is provided for designing oil pad on heavy-duty gantry CNC machine hydrostatic slideway.

  13. 30 CFR 57.16014 - Operator-carrying overhead cranes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Operator-carrying overhead cranes. 57.16014 Section 57.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

  14. 30 CFR 56.16014 - Operator-carrying overhead cranes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Operator-carrying overhead cranes. 56.16014 Section 56.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

  15. 30 CFR 56.16014 - Operator-carrying overhead cranes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Operator-carrying overhead cranes. 56.16014 Section 56.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

  16. 30 CFR 57.16014 - Operator-carrying overhead cranes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Operator-carrying overhead cranes. 57.16014 Section 57.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

  17. Efficacy of eastern equine encephalitis immunization in whooping cranes.

    PubMed

    Olsen, G H; Turell, M J; Pagac, B B

    1997-04-01

    An epizootic of eastern equine encephalitis (EEE) at the Patuxent Wildlife Research Center (PWRC), Laurel, Maryland (USA), in 1989 provided an opportunity to determine if EEE immunization protected whooping cranes (Grus americana). Based on seroconversion of 31% of sympatric hatch-year sandhill cranes, Grus canadensis, and a previous 35% case fatality rate in whooping cranes, 17 (37%) of the 46 susceptible whooping cranes should have been exposed to virus and six should have died. As there were no deaths in these birds, the EEE vaccination program appeared to be efficacious in this whooping crane population.

  18. Gantries and dose delivery systems

    NASA Astrophysics Data System (ADS)

    Meer, David; Psoroulas, Serena

    2015-06-01

    Particle therapy is a field in remarkable development, with the goal of increasing the number of indications which could benefit from such treatments and the access to the therapy. The therapeutic usage of a particle beam defines the technical requirements of all the elements of the therapy chain: we summarize the main characteristics of accelerators, the beam line, the treatment room, the integrated therapy and imaging systems used in particle therapy. Aiming at a higher flexibility in the choice of treatments, an increasing number of centers around the world have chosen to equip their treatment rooms with gantries, rotating beam line structures that allow a complete flexibility in the choice of the treatment angle. We review the current designs. A particle therapy gantry though is a quite expensive structure, and future development will increasingly consider reducing the cost and the footprint. Increasing the number of indications also means development in the delivery techniques and solving some of the issues which traditionally affected particle therapy, for example the precision of the delivery in presence of motion and the large penumbras for low depths. We show the current strategies in these fields, focusing on pencil beam scanning (PBS), and give some hints about future developments.

  19. Whooping crane titers to eastern equine encephalitis vaccinations

    USGS Publications Warehouse

    Olsen, Glenn H.; Kolski, E.; Hatfield, J.S.; Docherty, D.E.; Chavez-Ramirez, Felipe

    2005-01-01

    In 1984 an epizootic of eastern equine encephalitis (EEE) virus killed 7 of 39 (18%) whooping cranes in captivity at the Patuxent Wildlife Research Center in Laurel, Maryland, USA. Since that time whooping cranes have been vaccinated with a human EEE vaccine. This vaccine was unavailable for several years, necessitating use of an equine vaccine in the cranes. This study compared the antibody titers measured for three years using the human vaccine with those measured for two years using the equine form. Whooping cranes developed similarly elevated titers in one year using the human vaccine and both years using the equine vaccine. However, in two years where the human vaccine was used, the whooping cranes developed significantly lower titers compared to other years.

  20. Counter-balanced, multiple cable construction crane

    NASA Astrophysics Data System (ADS)

    Mikulas, Martin M., Jr.; Yang, Li-Farn

    1991-11-01

    The invention is a counter-balanced, multiple cable construction crane. The apparatus for hoisting payloads comprises a crane having a lifting means, the lifting means comprising an end effector means and three suspension means or cables. One end of each cable attaches to a different winding means located on the lifting means, and the other end of each cable attaches to a different point on the end effector, such that the three cables have a theoretical point of convergence with this point corresponding to the center of mass of the payload. Three controls command rotation of the winding means to a predetermined position. Accordingly, the crane provides precise and autonomous positioning of the payload without human guidance. The crane further comprises a counter-balancing means. Two controls position the counter-balancing means to offset the overturning moment which arises during the lifting of heavy payloads.

  1. Counter-balanced, multiple cable construction crane

    NASA Astrophysics Data System (ADS)

    Mikulas, Martin M., Jr.; Yang, Li-Farn

    1993-10-01

    The invention is a counter-balanced, multiple cable construction crane. The apparatus for hoisting payloads comprises a crane having a lifting means, the lifting means comprising an end effector means and three suspension means or cables. One end of each cable attaches to a different winding means located on the lifting means, and the other end of each cable attaches to a different point on the end effector, such that the three cables have a theoretical point of convergence with this point corresponding to the center of mass of the payload. Three controls command rotation of the winding means to a predetermined position. Accordingly, the crane provides precise and autonomous positioning of the payload without human guidance. The crane further comprises a counter-balancing means. Two controls position the counter-balancing means to offset the overturning moment which arises during the lifting of heavy payloads.

  2. Counter-balanced, multiple cable construction crane

    NASA Technical Reports Server (NTRS)

    Mikulas, Martin M., Jr. (Inventor); Yang, Li-Farn (Inventor)

    1993-01-01

    The invention is a counter-balanced, multiple cable construction crane. The apparatus for hoisting payloads comprises a crane having a lifting means, the lifting means comprising an end effector means and three suspension means or cables. One end of each cable attaches to a different winding means located on the lifting means, and the other end of each cable attaches to a different point on the end effector, such that the three cables have a theoretical point of convergence with this point corresponding to the center of mass of the payload. Three controls command rotation of the winding means to a predetermined position. Accordingly, the crane provides precise and autonomous positioning of the payload without human guidance. The crane further comprises a counter-balancing means. Two controls position the counter-balancing means to offset the overturning moment which arises during the lifting of heavy payloads.

  3. Cranes, hoists, and rigging. A safety training manual

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stinnett, L.

    The handling equipment discussed in this manual is the type that lifts, lowers, and locates (positions) heavy material - cranes and hoists. The crane/hoist family of equipment may be as small as a single pulley/rope system handling several pounds, or as large as a marine crane system that recently (1985) hoisted a 5005-metric ton oil drilling rig from a barge and placed it on the seabed of England's North Atlantic offshore oil field. An equivalent ''pick'' would be a 6-ft-high solid pine board, 360 ft long and 160 ft wide (the dimensions of a football field). The capacity of themore » cranes and hoists at Sandia National Laboratories in Albuquerque (SNLA) fits somewhere within the first 2% of the marine pick or lift described above. SNLA has several mobile cranes and more than 500 other types of cranes and hoists located in more than 100 buildings. The Department of Energy (DOE) and SNL have safety policies and directives that require the operators of heavy equipment to be trained and authorized. The Cranes, Hoists, and Rigging Safety Training Program, sponsored by the SNLA Safety Department, is an effort to fulfill those safety policy requirements. This manual will be used as a safety training aid and will be issued as a reference document for supervisors, operators, inspectors, and service personnel who use cranes or hoists during their regular duties.« less

  4. The bile acid composition of crane gallbladder bile

    USGS Publications Warehouse

    Serafin, J.A.

    1983-01-01

    1. The biliary bile acids of the whooping crane (Grus americana) and the Florida sandhill crane (G. canadensis pratensis) have been examined.2. Cholic acid (CA), chenodeoxycholic acid (CDOCA) and lithocholic acid were found in bile from both species of these North American cranes.3. CDOCA and CA were the primary bile acids in both species, together constituting 70% or more of the bile acids by weight.4. The primary bile acids of cranes appear to be the same as those that have been identified in other avian species.

  5. Timing of spring surveys for midcontinent sandhill cranes

    USGS Publications Warehouse

    Pearse, Aaron T.; Krapu, Gary L.; Brandt, David A.; Sargeant, Glen A.

    2015-01-01

    The U.S. Fish and Wildlife Service has used spring aerial surveys to estimate numbers of migrating sandhill cranes (Grus canadensis) staging in the Platte River Valley of Nebraska, USA. Resulting estimates index the abundance of the midcontinent sandhill crane population and inform harvest management decisions. However, annual changes in the index have exceeded biologically plausible changes in population size (>50% of surveys between 1982 and 2013 indicate >±20% change), raising questions about nuisance variation due to factors such as migration chronology. We used locations of cranes marked with very-high-frequency transmitters to estimate migration chronology (i.e., proportions of cranes present within the Platte River Valley). We also used roadside surveys to determine the percentage of cranes staging at the Platte River Valley but outside of the survey area when surveys occur. During March 2001–2007, an average of 86% (71–94%; SD = 7%) of marked cranes were present along the Platte River during scheduled survey dates, and 0–11% of cranes that were present along the Platte River were not within the survey boundaries. Timing of the annual survey generally corresponded with presence of the greatest proportion of marked cranes and with least inter-annual variation; consequently, accuracy of estimates could not have been improved by surveying on different dates. Conducting the survey earlier would miss birds not yet arriving at the staging site; whereas, a later date would occur at a time when a larger portion of birds may have already departed the staging site and when a greater proportion of birds occurred outside of the surveyed area. Index values used to monitor midcontinent sandhill crane abundance vary annually, in part, due to annual variation in migration chronology and to spatial distribution of cranes in the Platte River Valley; therefore, managers should interpret survey results cautiously, with awareness of a continuing need to identify and

  6. 29 CFR 1926.1432 - Multiple-crane/derrick lifts-supplemental requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Multiple-crane/derrick lifts-supplemental requirements... Cranes and Derricks in Construction § 1926.1432 Multiple-crane/derrick lifts—supplemental requirements... implementation. (1) The multiple-crane/derrick lift must be directed by a person who meets the criteria for both...

  7. Distribution and migration chronology of Eastern population sandhill cranes

    USGS Publications Warehouse

    Fronczak, David L.; Andersen, David; Hanna, Everett E.; Cooper, Thomas R.

    2017-01-01

    The Eastern Population (EP) of greater sandhill cranes (Antigone canadensis tabida; cranes) is expanding in size and geographic range. Little information exists regarding the geographic extent of breeding, migration, and wintering ranges, migration chronology, or use of staging areas for cranes in the EP. To obtain these data, we attached solar global positioning system (GPS) platform transmitting terminals (PTTs) to 42 sandhill cranes and monitored daily locations from December 2009 through August 2014. On average, tagged cranes settled in summer areas during late‐March in Minnesota (7%), Wisconsin (29%), Michigan, USA (21%), and Ontario, Canada (38%) and arrived at their winter terminus beginning mid‐December in Indiana (15%), Kentucky (3%), Tennessee (45%), Georgia (5%), and Florida (32%). Cranes initiated spring migration beginning mid‐February to their respective summer areas on routes similar to those used during fall migration. Twenty‐five marked cranes returned to the same summer area after a second spring migration, of which 19 (76%) settled <3 km from the estimated mean center of the summer area of the previous year. During the 2010–2012 United States Fish and Wildlife Service (USFWS) Cooperative Fall Abundance Survey for cranes in the EP, we estimated that approximately 29–31% of cranes that summered in both Wisconsin and the Lower Peninsula of Michigan were not in areas included in the survey. The information we collected on crane movements provides insight into distribution and migration chronology that will aid in assessment of the current USFWS fall survey. In addition, information on specific use sites can assist state and federal managers to identify and protect key staging and winter areas particularly during current and future recreational harvest seasons.

  8. Isolation of a sex-linked DNA sequence in cranes.

    PubMed

    Duan, W; Fuerst, P A

    2001-01-01

    A female-specific DNA fragment (CSL-W; crane sex-linked DNA on W chromosome) was cloned from female whooping cranes (Grus americana). From the nucleotide sequence of CSL-W, a set of polymerase chain reaction (PCR) primers was identified which amplify a 227-230 bp female-specific fragment from all existing crane species and some other noncrane species. A duplicated versions of the DNA segment, which is found to have a larger size (231-235 bp) than CSL-W in both sexes, was also identified, and was designated CSL-NW (crane sex-linked DNA on non-W chromosome). The nucleotide similarity between the sequences of CSL-W and CSL-NW from whooping cranes was 86.3%. The CSL primers do not amplify any sequence from mammalian DNA, limiting the potential for contamination from human sources. Using the CSL primers in combination with a quick DNA extraction method allows the noninvasive identification of crane gender in less than 10 h. A test of the methodology was carried out on fully developed body feathers from 18 captive cranes and resulted in 100% successful identification.

  9. Vitamin E in cranes: reference ranges and nutrient interactions

    USGS Publications Warehouse

    Dierenfeld, Ellen S.; Sheppard, C.D.; Langenberg, J.; Mirande, C.; Spratt, J.; Dein, F.J.

    1993-01-01

    Fat soluble vitamins E and A (quantified as alpha-tocopherol and all-trans retinol, respectively) were measured in plasma samples from 274 captive cranes from four institutions and five free-ranging birds. Ages ranged from 4 mo to 80 yr, and all 15 crane species were represented. Captive cranes had a mean +/- standard error (SE) of 6.57 +/- 0.82 micrograms/ml alpha-tocopherol; migrating greater sandhill cranes (Grus canadenis tabida) had a plasma concentration of 3.71 +/- 0.22 micrograms/ml. Sex and age differences were not significant, but crane species that evolved in temperate habitats had higher circulating levels of alpha-tocopherol than tropical or subtropical species. Mean +/- SE retinol values were 0.69 +/- 0.05 micrograms/ml in captive cranes, and 0.66 +/- 0.08 micrograms/ml in free-ranging cranes; values did not differ significantly by sex, age, or species. Dietary vitamin E concentrations were significantly correlated with plasma alpha-tocopherol levels in a logarithmic relationship. Dietary selenium at 0.5 mg/kg was associated with decreased circulating alpha-tocopherol concentrations.

  10. 46 CFR 107.258 - Crane certification.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

  11. 46 CFR 107.258 - Crane certification.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

  12. 46 CFR 107.258 - Crane certification.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

  13. 46 CFR 107.258 - Crane certification.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

  14. 46 CFR 107.258 - Crane certification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane certification. 107.258 Section 107.258 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.258 Crane certification. (a) The Coast Guard may accept current...

  15. SU-F-T-207: Does the Greater Flexibility of Pencil Beam Scanning Reduce the Need for a Proton Gantry?

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yan, S; Depauw, N; Flanz, J

    2016-06-15

    Purpose: Gantry-less proton treatment facility could lower the capital cost of proton therapy. This study investigates the dosimetric feasibility of using only coplanar pencil beam scanning (PBS) beams for those patients who had beam angles that would not have been deliverable without the gantry. Those coplanar beams are implemented on gantry-less horizontal beam-line with patients in sitting or standing positions. Methods: We have selected ten patients (seven head-and-neck, one thoracic, one abdominal and one pelvic case) with clinically delivered double scattering (DS) or PBS treatment plans with beam angles that were challenging to achieve without a gantry. After removing thesemore » beams angles, PBS plans were optimized for gantry-less intensity modulated proton therapy (IMPT) or single field optimization (SFO) with multi-criteria optimization (MCO). For head-and-neck patients who were treated by DS, we generated PBS plans with non-coplanar beams for comparison. Dose-volume-histograms (DVHs), target homogeneity index (HI), mean dose, D-2 and D-98 were reported. Robustness analysis was performed with ±2.5 mm setup errors and ±3.5% range uncertainties for three head-and-neck patients. Results: PBS-gantry-less plans provided more homogenous target coverage and significant improvements on organs-at-risk (OARs) sparing, compared to passive scattering treatments with a gantry. The PBS gantry-less treatments reduced the HI for target coverage by 1.3% to 47.2%, except for a suprasellar patient and a liver patient. The PBS-gantry-less plans reduced the D-mean of OARs by 3.6% to 67.4%. The PBS-gantry plans had similar target coverage and only marginal improvements on OAR sparing as compared to the PBS-gantry-less plans. These two PBS plans also had similar robustness relative to range uncertainties and setup errors. Conclusion: The gantry-less plans have with less mean dose to OARs and more homogeneous target coverage. Although the PBS-gantry plans have slightly

  16. Molecular Characterization of Bacterial Populations in Sandhill Crane Feces

    EPA Science Inventory

    Sandhill cranes have the potential to be important seasonal sources of waterborne fecal bacteria; however, it is currently not possible to measure the extent of crane fecal pollution in potentially impacted areas as there are no available crane-specific assays. This is in part d...

  17. Avian tuberculosis and salmonellosis in a whooping crane (Grus americana)

    USGS Publications Warehouse

    Stroud, R.K.; Thoen, C.O.; Duncan, R.M.

    1986-01-01

    The whooping crane has been the subject of intensive scientific study and management because it is an endangered species and has high public interest. Programs have been developed to identify critical habitat, to increase production through captive breeding, and in recent years, to use sandhill cranes (Grus canadensis) as surrogate parents in establishing new populations of wild whooping cranes. Only a few reports describing diseases and parasites in wild whooping cranes appear in the literature because opportunities to secure specimens are limited for this rare, protected bird (for review, see Carpenter and Derrickson, In Proc. International Crane Workshop of 1983, Bharatur, India, in press). Avian tuberculosis and concurrent salmonellosis in a wild whooping crane are described in this case report.

  18. Testing a West Nile virus vaccine in sandhill cranes (Grus canadensis)

    USGS Publications Warehouse

    Olsen, Glenn H.; Miller, K.; Docherty, D.; Sileo, L.; Chavez-Ramirez, Felipe

    2005-01-01

    Eight sandhill cranes (Grus canadensis) were vaccinated with a commercial equine West Nile virus vaccine (Fort Dodge Animal Health, Fort Dodge, Iowa, USA) at the USGS Patuxent Wildlife Research Center, Laurel, Maryland, USA. Three doses of the vaccine were given, the first dose (day 0) was followed by a second 21 days later and the third dose 7 days after the second day 28 after the first dose). All doses were 0.50 ml. In addition, 5 sandhill cranes were given injections of similar amounts of sterile water on the same schedule. Blood for complete blood counts, serum chemistries, and serological testing was collected at weekly intervals. Ten weeks after the first injection of the vaccine and 6 weeks after the last of the 3 injections of the vaccine, the cranes were shipped to the USGS National Wildlife Heath Center, Madison, Wisconsin, USA. After a two-week adjustment period, 11 of these cranes were injected intramuscularly with one mosquito dose of West Nile virus. Two of the vaccinated cranes were not challenged and acted as uninfected controls. One week post challenge the only abnormal findings were slight weight loss (average 6% loss since the time of challenge with West Nile virus) and elevated white blood cell counts (heterophilic leukocytosis). There were no deaths and no clinically ill cranes (unvaccinated or vaccinated cranes) among the 11 challenged birds. All cranes were euthanized 6 weeks post challenge, and necropsies were performed. Pre-challenge titers showed no titer response to the vaccinations. However, when challenged, vaccinated cranes developed titers more quickly (within 7-10 days), and were viremic and shed virus via the cloaca for a shorter period of time than the unvaccinated cranes (2-7 days for vaccinated cranes versus 2-10 days for unvaccinated cranes). No remarkable lesions were noted in any of the cranes during the necropsy examinations. Histopathological findings are available for only four of the cranes at this time. Three of those

  19. Hematological and serum chemistry norms for sandhill and whooping cranes

    USGS Publications Warehouse

    Olsen, Glenn H.; Hendricks, M.M.; Dressler, L.E.

    2001-01-01

    The normal values used as a diagnostic tool and for comparison of cranes were established in the early 1970's. In that early study, no effort was made to look at factors such as age, sex, or subspecies. In addition, during the early study disease problems (primarily disseminated visceral coccidiosis) and nutritional problems were undiagnosed and uncontrolled. For 2 years during the annual health examinations of cranes at the USGS Patuxent Wildlife Research Center (Patuxent), we collected blood from healthy cranes for analysis. We found significant differences between the values reported from the 1970's and the values seen in this study for 8 blood parameters for Florida sandhill cranes (Grus canadensis pratensis), 6 blood parameters for greater sandhill cranes (G. c. tabida), and 6 blood parameters for whooping cranes (Grus americana). In addition, there were significant differences for some hematology and serum chemistry values based on the age of the cranes.

  20. 29 CFR 1918.55 - Cranes (See also § 1918.11).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) Operator's station. (1) Cranes with missing, broken, cracked, scratched, or dirty glass (or equivalent...) Unattended cranes. When cranes are left unattended between work periods, § 1918.66(b) (4)(i) through (v...

  1. 29 CFR 1918.55 - Cranes (See also § 1918.11).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) Operator's station. (1) Cranes with missing, broken, cracked, scratched, or dirty glass (or equivalent...) Unattended cranes. When cranes are left unattended between work periods, § 1918.66(b) (4)(i) through (v...

  2. 29 CFR 1918.55 - Cranes (See also § 1918.11).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) Operator's station. (1) Cranes with missing, broken, cracked, scratched, or dirty glass (or equivalent...) Unattended cranes. When cranes are left unattended between work periods, § 1918.66(b) (4)(i) through (v...

  3. 3. AERIAL VIEW OF MOBILE LAUNCHER. ON TOP OF LUT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. AERIAL VIEW OF MOBILE LAUNCHER. ON TOP OF LUT SITS A 25 TON HAMMERHEAD CRANE. STRUCTURE ON LEFT SIDE OF LAUNCH PLATFORM IS KNOWN AS A 'MILK STOOL' AND ALLOWS A SATURN 1B ROCKET TO BE USED IN PLACE OF THE SATURN V ROCKET. - Mobile Launcher One, Kennedy Space Center, Titusville, Brevard County, FL

  4. 33 CFR 150.555 - How must cranes be maintained?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false How must cranes be maintained? 150.555 Section 150.555 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Operations § 150.555 How must cranes be maintained? Cranes must be operated, maintained, and tested in...

  5. 33 CFR 150.555 - How must cranes be maintained?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How must cranes be maintained? 150.555 Section 150.555 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Operations § 150.555 How must cranes be maintained? Cranes must be operated, maintained, and tested in...

  6. 29 CFR 1910.180 - Crawler locomotive and truck cranes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

  7. 29 CFR 1910.180 - Crawler locomotive and truck cranes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

  8. 29 CFR 1910.180 - Crawler locomotive and truck cranes.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

  9. 29 CFR 1910.180 - Crawler locomotive and truck cranes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

  10. 29 CFR 1910.180 - Crawler locomotive and truck cranes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... readily available. (iv) No cranes shall be rerated in excess of the original load ratings unless such...) No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e... limited to freely suspended loads. Cranes shall not be used for dragging loads sideways. (v) No hoisting...

  11. Capture of sandhill cranes using alpha-chloralose.

    PubMed

    Hayes, Matthew A; Hartup, Barry K; Pittman, Jeanne M; Barzen, Jeb A

    2003-10-01

    From 1990-2001, we made 188 successful captures of 166 different greater sandhill cranes (Grus canadensis tabida) through experimental use of alpha-chloralose (AC). Most captures took place during September (72.3%; n = 136), followed by August (14.9%; n = 28), and October (12.8%; n = 24). Territorial pairs were captured more successfully than family groups. Overall morbidity (6.4%) and mortality (4.3%) were lower than most other capture techniques for sandhill cranes. Exertional myopathy (EM) was the most common complication observed using AC (3.7%). Sedation level (chi5(2) = 25.9, P < 0.01) and month of capture (chi2(2) = 12.3, P < 0.01) were both associated with the presence of EM in cranes captured with AC. A logistic regression model suggests lighter sedation and the months of August and October are potential risk factors for EM in sandhill cranes captured with AC in Wisconsin (USA).

  12. Clinical pathology results from cranes with experimental West Nile Virus infection

    USGS Publications Warehouse

    Olsen, Glenn H.

    2011-01-01

    Sandhill cranes (Grus canadensis) were vaccinated for and then challenged with West Nile virus. Resulting titers demonstrated protection in the vaccinated-challenged cranes as compared to the unvaccinated-challenged cranes. Clinical pathology results showed challenged cranes, whether vaccinated or not, had a decrease in their hematocrits and an elevation of 2.5-fold in their white blood cell counts as compared to unchallenged control sandhill cranes. No differences were apparent in the differential counts of heterophils and lymphocytes.

  13. Fecal corticosterone reflects serum corticosterone in Florida sandhill cranes.

    PubMed

    Ludders, J W; Langenberg, J A; Czekala, N M; Erb, H N

    2001-07-01

    Florida sandhill cranes (Grus canadensis pratensis) were conditioned to confinement 6 hr/day for 7 days. On day 8, each bird's jugular vein was catheterized, blood samples were drawn, and each crane was confined for 6 hr. Using a randomized, restricted cross-over design, cranes were injected intravenously with either 0.9% NaCl solution or ACTH (cosyntropin; Cortrosyn; 0.25 mg). During the 6 hr of confinement, fecal samples (feces and urine) were collected from each of five cranes immediately after defecation. Individual fecal samples were collected approximately at hourly intervals and assayed for corticosterone. We showed previously that serum corticosterone did not vary significantly following saline injection, but peaked significantly 60 min after ACTH injection. Maximal fecal corticosterone concentrations (ng/g) were greater (P < 0.10; median 1087 ng/g) following ACTH stimulation compared to maximal fecal corticosterone concentrations at the end of acclimation (day 7; median 176) and following saline treatment (median 541). In cranes under controlled conditions, fecal corticosterone concentration reflects serum corticosterone levels, fecal corticosterone, Grus canadensis pratensis, sandhill cranes, serum corticosterone levels.

  14. 77 FR 73265 - Airworthiness Directives; Erickson Air-Crane Incorporated Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-10

    ... Airworthiness Directives; Erickson Air-Crane Incorporated Helicopters AGENCY: Federal Aviation Administration... Erickson Air-Crane Incorporated (Erickson) Model S-64F helicopters. This AD requires inspecting for... service information identified in this AD, contact Erickson Air-Crane Incorporated, ATTN: Chris Erickson...

  15. Alternating-gradient canted cosine theta superconducting magnets for future compact proton gantries

    DOE PAGES

    Wan, Weishi; Brouwer, Lucas; Caspi, Shlomo; ...

    2015-10-23

    We present a design of superconducting magnets, optimized for application in a gantry for proton therapy. We have introduced a new magnet design concept, called an alternating-gradient canted cosine theta (AG-CCT) concept, which is compatible with an achromatic layout. This layout allows a large momentum acceptance. The 15 cm radius of the bore aperture enables the application of pencil beam scanning in front of the SC-magnet. The optical and dynamic performance of a gantry based on these magnets has been analyzed using the fields derived (via Biot-Savart law) from the actual windings of the AG-CCT combined with the full equationsmore » of motion. The results show that with appropriate higher order correction, a large 3D volume can be rapidly scanned with little beam shape distortion. A very big advantage is that all this can be done while keeping the AG-CCT fields fixed. This reduces the need for fast field ramping of the superconducting magnets between the successive beam energies used for the scanning in depth and it is important for medical application since this reduces the technical risk (e.g., a quench) associated with fast field changes in superconducting magnets. For proton gantries the corresponding superconducting magnet system holds promise of dramatic reduction in weight. For heavier ion gantries there may furthermore be a significant reduction in size.« less

  16. Alternating-gradient canted cosine theta superconducting magnets for future compact proton gantries

    NASA Astrophysics Data System (ADS)

    Wan, Weishi; Brouwer, Lucas; Caspi, Shlomo; Prestemon, Soren; Gerbershagen, Alexander; Schippers, Jacobus Maarten; Robin, David

    2015-10-01

    We present a design of superconducting magnets, optimized for application in a gantry for proton therapy. We have introduced a new magnet design concept, called an alternating-gradient canted cosine theta (AG-CCT) concept, which is compatible with an achromatic layout. This layout allows a large momentum acceptance. The 15 cm radius of the bore aperture enables the application of pencil beam scanning in front of the SC-magnet. The optical and dynamic performance of a gantry based on these magnets has been analyzed using the fields derived (via Biot-Savart law) from the actual windings of the AG-CCT combined with the full equations of motion. The results show that with appropriate higher order correction, a large 3D volume can be rapidly scanned with little beam shape distortion. A very big advantage is that all this can be done while keeping the AG-CCT fields fixed. This reduces the need for fast field ramping of the superconducting magnets between the successive beam energies used for the scanning in depth and it is important for medical application since this reduces the technical risk (e.g., a quench) associated with fast field changes in superconducting magnets. For proton gantries the corresponding superconducting magnet system holds promise of dramatic reduction in weight. For heavier ion gantries there may furthermore be a significant reduction in size.

  17. SU-E-J-213: Imaging and Treatment Isocenter Verification of a Gantry Mounted Proton Therapy System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Price, S; Goddu, S; Rankine, L

    2014-06-01

    Purpose: The Mevion proton therapy machine is the first to feature a gantry mounted sychro-cyclotron. In addition, the system utilizes a 6D motion couch and kV imaging for precise proton therapy. To quantify coincidence between these systems, isocentricity tests were performed based on kV imaging alignment using radiochromic film. Methods: The 100 ton gantry and 6D robotic couch can rotate 190° around isocenter to provide necessary beam angles for treatment. The kV sources and detector panels are deployed as needed to acquire orthogonal portals. Gantry and couch mechanical isocenter were tested using star-shots and radiochromic-film (RCF). Using kV imaging, themore » star-shot phantom was aligned to an embedded fiducial and the isocenter was marked on RCF with a pinprick. The couch and gantry stars were performed by irradiating films at every 45° and 30°, respectively. A proton beam with a range and modulation-width of 18 cm was used. A Winston-Lutz test was also performed at the same gantry and couch rotations using a custom jig holding RCF and a tungsten ball placed at isocenter. A 2 cm diameter circular aperture was used for the irradiation. Results: The couch star-shot indicated a minimum tangent circle of 0.6 mm, with a 0.9 mm offset from the manually marked isocenter. The gantry star-shot showed a 0.6 mm minimum tangent circle with a 0.5 mm offset from the pinprick. The Winston Lutz test performed for gantry rotation showed a maximum deviation from center of 0.5 mm. Conclusion: Based on star-shots and Winston-Lutz tests, the proton gantry and 6D couch isocentricity are within 1 mm. In this study, we have shown that the methods commonly utilized for Linac characterization can be applied to proton therapy. This revolutionary proton therapy system possesses excellent agreement between the mechanical and radiation isocenter, providing highly precise treatment.« less

  18. Feeding ecology of sandhill cranes during spring migration in Nebraska

    USGS Publications Warehouse

    Reinecke, K.J.; Krapu, G.L.

    1986-01-01

    We studied the food habits of midcontinent sandhill cranes (Grus canadensis) during spring 1978 and 1979 at their primary staging area along the Platte River and compared population food and foraging habitat requirements with availability. Crane diets varied among the 3 principal foraging habitats, but not between sexes, ages, or years. Cranes feeding in cornfields ate >99% corn (total dry wt); those feeding in native grasslands and alfalfa fields consumed 79-99% invertebrates. The composite diet of cranes was 97% corn and 3% invertebrates, including 2% earthworms, 0.5% snails, and 0.5% insects. Presumably, corn provided energy, whereas invertebrates from grasslands and alfalfa fields provided supplemental nutrients to compensate for protein and calcium deficiencies in corn. The mean density of waste corn decreased (P 50%. Management by burning, haying, and grazing is compatible with crane use of grasslands, and reduced-till farming could benefit cranes by increasing invertebrate populations.

  19. 29 CFR 1919.71 - Unit proof test and examination of cranes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Unit proof test and examination of cranes. 1919.71 Section... § 1919.71 Unit proof test and examination of cranes. (a) Unit proof tests of cranes shall be carried out at the following times: (1) In the cases of new cranes, before initial use and every 4 years...

  20. 29 CFR 1919.71 - Unit proof test and examination of cranes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Unit proof test and examination of cranes. 1919.71 Section... § 1919.71 Unit proof test and examination of cranes. (a) Unit proof tests of cranes shall be carried out at the following times: (1) In the cases of new cranes, before initial use and every 4 years...

  1. A fuzzy-logic antiswing controller for three-dimensional overhead cranes.

    PubMed

    Cho, Sung-Kun; Lee, Ho-Hoon

    2002-04-01

    In this paper, a new fuzzy antiswing control scheme is proposed for a three-dimensional overhead crane. The proposed control consists of a position servo control and a fuzzy-logic control. The position servo control is used to control crane position and rope length, and the fuzzy-logic control is used to suppress load swing. The proposed control guarantees not only prompt suppression of load swing but also accurate control of crane position and rope length for simultaneous travel, traverse, and hoisting motions of the crane. Furthermore, the proposed control provides practical gain tuning criteria for easy application. The effectiveness of the proposed control is shown by experiments with a three-dimensional prototype overhead crane.

  2. 29 CFR 1926.6 - Incorporation by reference.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-mail: [email protected]; Web site: http://www.asme.org/: (1) ASME B30.2-2005, Overhead and Gantry....1501(a). (2) ANSI B30.2.0-1967, Safety Code for Overhead and Gantry Cranes, approved May 4, 1967, IBR..., Washington, DC 20210. (2) The Regional and Field Offices of the Occupational Safety and Health Administration...

  3. [Production of interspecies hybrid of cranes by artificial insemination with frozen semen].

    PubMed

    Maksudov, G Iu; Panchenko, V G

    2002-01-01

    Studies of artificial insemination of cranes and cryoconservation of their semen have been carried out in the nursery of rare species at the Oka Biosphere Reserve for many years. The criterion of successful cryoconservation of the semen is the obtaining of fertilized eggs after artificial insemination by the thawed semen. An experiment is described on artificial insemination of females of the white-naped crane Grus vipio by the frozen-thawed semen of the Siberian white crane G. leucogeranus after one-year storage of semen in liquid nitrogen. As a result, an interspecific hybrid of cranes was obtained, which confirmed the possibility of producing a bank of cryoconserved crane semen. The use of the white-naped crane females was due to the absence of conspecific males and unavailability of Siberian white crane females. Problems of artificial insemination and cryoconservation of semen of rare crane species are discussed.

  4. Whooping crane recovery plan

    USGS Publications Warehouse

    Olsen, David L.; Blankenship, David R.; Irby, Harold D.; Erickson, Ray C.; Lock, Ross; Drewien, Roderick C.; Smith, Lawrence S.; Derrickson, Scott R.

    1980-01-01

    This plan has been prepared under the authority of the Endangered Species Act of 1973 and subsequent amendments. The Plan is designed to provide decision makers with an orderly set of events which, if carried out to a successful completion, will result in changing the status of the species from the endangered to the threatened level. It must be recognized that this Plan has been prepared 40 years after attempts to preserve the species began. As such, it covers events that have taken place, that are taking place, and that need to take place. The Plan, therefore, not only compiles in one place all whooping crane management and research efforts which are underway, but also proposes additional efforts needed for the recovery of the whooping crane. The Plan also establishes funding evels, time schedules, and priorities for each management and research effort.The Plan is organized into three parts. the first part includes an account of the whooping crane's history, biology, present status, and the factors believed to have resulted in its endangered status. Also included in this part is a synopsis of research and management activities that have taken place through 1978.The second part is a step-down pan wherein all existing and needed research and management efforts are organized into an orderly set of events. The prime objective is to move the whooping crane to non-endangered status. Minimum requirements for the attainment of this objective are the increase of the historical Wood Buffalo-Aransas population to at least 40 nesting pairs and the establishment of at least two additional, separate, and self-sustaining populations consisting of at least 20 nesting pairs each.the third part identifies the responsibility, time schedule, and cost for each element of the step-down plan.

  5. Promoting wildness in sandhill cranes conditioned to follow an ultralight aircraft

    USGS Publications Warehouse

    Duff, J.W.; Lishman, W.A.; Clark, D.A.; Gee, G.F.; Sprague, D.T.; Ellis, D.H.

    2001-01-01

    During the 1998 field season, we developed and tested a new protocol to teach sandhill cranes (Grus canadensis) to follow ultralight aircraft yet avoid humans. Although successful in teaching the cranes a migration route, our previous migration (1997) resulted in birds that were overly tame and sought association with humans. For this study, 16 sandhill cranes were costume-reared at USGS Patuxent Wildlife Research Center and transported to Ontario shortly before fledging. After the birds learned to follow the aircraft, 14 were transported to an isolated wintering site in South Carolina, 1300 km south of the training area. Twelve arrived safely. Eleven of 12 birds survived the winter. All of these 11 cranes moved north to Cape Hatteras in early May. Thereafter, 6 of the cranes were captured and translocated to northern New York state. The remaining 5 returned to South Carolina, autumn 1999. Prior to capture, although the cranes sometimes allowed humans to approach them, none of the cranes approached buildings or humans.

  6. 77 FR 49722 - Cranes and Derricks in Construction: Demolition and Underground Construction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-17

    ... cranes rule, OSHA prepared a final economic analysis (FEA) as required by the Occupational Safety and... construction work involving demolition. The FEA for the final cranes standard, which included all cranes, crane... were technologically and economically feasible. Because the FEA drew these conclusions from...

  7. 29 CFR 1918.55 - Cranes (See also § 1918.11).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) Operator's station. (1) Cranes with missing, broken, cracked, scratched, or dirty glass (or equivalent... shall not be used except in an emergency or during non-cargo handling operations such as stowing cranes... shall not be used if control levers operate with excessive friction or excessive play. (6) When cranes...

  8. Pulmonary lesions in disseminated visceral coccidiosis of sandhill and whooping cranes

    USGS Publications Warehouse

    Novilla, M.N.; Carpenter, J.W.; Jeffers, T.K.; White, S.L.

    1989-01-01

    Fifty cranes, consisting of 46 sandhill (Grus canadensis) and four whooping cranes (Grus americana), were studied. Eighteen sandhill cranes and the four whooping cranes were naturally infected with disseminated visceral coccidiosis (DVC). The remaining sandhill cranes were chicks experimentally infected with oocysts of Eimeria reichenowi and/or E. gruis; five chicks served as controls. There were no clinical signs attributed to respiratory infection. Necropsy of naturally infected adult birds revealed nodules in many organs, including the lung, air sacs, trachea and nares. Artificially infected sandhill cranes and the whooping crane chicks that died from DVC had congestion and consolidated areas in the lung with frothy fluid in the airways. Grossly visible nodules were observed from 10 days postinoculation. Granulomatous pneumonia and tracheitis were observed with light microscopy. Lesions were associated with merogonic and gametogonic stages of eimerian coccidia. Granulomas and granulomatous foci contained parasitized large mononuclear cells. Merogonic stages were seen in lymphoid cells by ultrastructural examination. Oocysts were observed in the trachea and bronchial mucosa and admixed with exudate in the airways, indicating that crane eimerians can complete their life cycle at these sites. Of the few eimeriid coccidia that have extraintestinal stages of development in birds and mammals, only the species in cranes complete their life cycle in both the digestive and respiratory tracts.

  9. The one-by-one method for releasing cranes

    USGS Publications Warehouse

    Ellis, D.H.; Mummert, D.P.; Urbanek, R.P.; Kinloch, M.; Mellon, C.; Dolbeare, T.; Ossi, D.P.

    2001-01-01

    Although the trend for the past 2 decades has been toward releasing naive groups of juveniles after a lengthy acclimation period, in 5 separate releases (1996-2000) we tested the idea that naive juvenile greater sandhill cranes (Grus canadensis tabida) would survive better if released singly into a wild flock of predator-wary birds than if left as a group, inexperienced at foraging and ill prepared to avoiding predators. We released 3 groups of hand-reared juveniles (n = 12 [1996]; n = 8 [1998], n = 12 [1999]) into a wild flock of sandhill cranes (ca 300 birds) on wintering grounds near Gila Bend, Arizona. Another 8 parent-reared colts were released into a small group (4) of subadult greater sandhill cranes (survivors of the 1996 trucking experiment [Ellis, et al. 1997; Ellis et al. 2001, Mummert et al. 2001]) in northcentral Arizona. Another 8 juveniles, costume-reared from hatching, were released into wild sandhill crane flocks in central Wisconsin at autumn staging areas. In all of these tests, cranes were released 1 or 2 at a time, either at the periphery of a wild flock or at a known roost site. Most birds were released in daylight at a foraging area, but because this was a pilot project, we tried a variety of methods. We released a few individuals at odd times (e.g., midnight) and in odd ways (e.g., by flushing a release crane as a wild flock passed overhead). A few birds were initially left stranded after we placed them at ephemeral roosts that had been used recently, but not subsequent to our visit. However, once we made the necessary adjustments, and regardless of release time or situation, all of our cranes very quickly joined their adoptive flocks. We experienced excellent survival, including 100% survival for all 8 of our parent-reared fledgling colts released on the summering ground and followed until they disappeared at the time of migration. Further, all (32) hand-reared birds released on the wintering grounds survived the winter. Also all 8 of the

  10. Use of an inactivated eastern equine encephalitis virus vaccine in cranes

    USGS Publications Warehouse

    Carpenter, J.W.; Dein, F.J.; Clark, G.G.; Watts, D.M.; Crabbs, C.L.

    1986-01-01

    An unprecedented outbreak of fatal eastern equine encephalitis (EEE) virus occurred during the late summer and fall of 1984 in endangered whooping cranes (Grus americana) at the Patuxent Wildlife Research Center, Laurel, Maryland. As part of efforts to prevent future epizootics of EEE. studies were conducted to evaluate the antibody response of cranes following vaccination with a formalin-inactivated EEE virus vaccine. Viral specific neutralizing antibody was elicited in sandhill cranes (Grus canadensis) and whooping cranes following 1M inoculation with the vaccine. Among the 1M-inoculated cranes, peak antibody titers of 1:80 on days 30 to 60 had waned to undetectable levels by days 90 to 120. Although the initial titers were not increased by the first booster dose, the duration of the antibody was extended considerably. Whooping cranes, receiving vaccine 6 months after their first vaccination, developed titers of 1:80 to 1:320 by day 30. At 45 days after the final vaccination, these titers had dropped to 1:10 to 1:160. Cranes with preexisting EEE virus antibody, apparently reflecting natural infection, exhibited an anamnestic response indicated by a rapid increase and sustained high antibody titer. Even though EEE virus vaccine induced neutralizing antibody and produced no adverse side effects, further studies will be required to assess the significance of this response as a strategy for protecting whooping cranes against natural EEE virus infection. The loss of captive whooping cranes to the EEE virus presented a previously unrecognized risk and obstacle to recovery of this species. Not only was, there a setback in the captive breeding and reintroduction program for the whooping crane, but, because of the susceptibility of the species to the EEE virus. establishment of additional crane populations may be more complicated than initially envisioned. However, through continued surveillance, serological monitoring, and vaccination activities, we are confident that

  11. SU-F-T-430: Validation of IBEAM Evo Couch Top for Different Relative Electron Density (RED) Combination During Photon Beam Dose Calculation in Monaco− Treatment Planning System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Manigandan, D; Kumar, M; Mohandas, P

    Purpose: Validation of iBEAM™ evo couch-top for different relative electron density (RED) combination during photon beam dose calculation in Monaco− TPS. Methods: The iBEAM™ evo couch-top has two layers:outer carbon fiber (CF) and inner foam core (FC). To study the beam intensity attenuation of couch-top, measured doses were compared with doses calculated for different REDs. Measurements were performed in solid water phantom with PTW-0.125cc ion-chamber positioned at center of the phantom with 5.3cm thickness slabs placed above and below the chamber. Similarly, in TPS, iBEAM™ evo couch-top was simulated and doses were calculated for different RED combinations (0.2CF-0.2FC, 0.4CF-0.2FC, 0.6CF-0.2FC,more » 0.8CF-0.2FC, and 1.0CF-0.2FC) by using Monte Carlo dose calculation algorithm in Monaco TPS (V5.1). Doses were measured for every 10 degree gantry angle separation, 10×10cm{sup 2} field size and 6MV photons. Then, attenuation is defined as the ratio of output at posterior gantry angle to output of its opposed anterior gantry angle (e.g.225°/45°). output fluctuation with different gantry angle was within ±0.21%. To confirm above results, dose-planes were measured for five pelvic VMAT plans (360°arc) in PTW two-dimensional array and compared with different calculated dose-planes of above-mentioned couch REDs. Gamma pass rates<1.00) were analyzed for 3%/2mm criteria. Results: Measured and calculated attenuation was in good agreement for the RED combination of 0.2CF-0.2FC and difference was within ±0.515%. However, other density combination showed difference of ±0.9841%, ±1.667%, ±2.9241% and ±2.8832% for 0.4CF-0.2FC, 0.6CF-0.2FC, 0.8CF-0.2FC, and 1.0CF-0.2FC, respectively. Maximum couch-top attenuation was observed at 110°–120° and 240°–250° and decreases linearly as the gantry angle approaches 180°. Moreover, gamma pass rate confirmed the above results and showed maximum pass rate of 96.23% for 0.2CF-0.2FC, whereas others were 95.72%, 95

  12. Golden Eagle predation on experimental Sandhill and Whooping Cranes

    USGS Publications Warehouse

    Ellis, D.H.; Clegg, K.R.; Lewis, J.C.; Spaulding, E.

    1999-01-01

    There are very few published records of Golden Eagles preying upon cranes, especially in North America. During our experiments to lead cranes on migration behind motorized craft in the western United States, we experienced 15 attacks (four fatal) and believe many more attacks would have occurred (and more would have been fatal) without human intervention. We recognize eagle predation as an important risk to cranes especially during migration.

  13. View northnortheast of drydock no. 2 and its portal cranes. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View north-northeast of drydock no. 2 and its portal cranes. Main crane, 50 long tons capacity/maximum height 118 "2", is at left; whip crane, 53 long tons capacity maximum height 173 "8" is at center; auxiliary crane, 15 long tons capacity/maximum height 161 "0" is at right. Building at left is the turret shed. The vessel at the lower right of the photograph is a receiving ship formerly used for processing and temporary housing of naval personnel. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Drydock No. 2, League Island, Philadelphia, Philadelphia County, PA

  14. Analysis and testing of a space crane articulating joint testbed

    NASA Technical Reports Server (NTRS)

    Sutter, Thomas R.; Wu, K. Chauncey

    1992-01-01

    The topics are presented in viewgraph form and include: space crane concept with mobile base; mechanical versus structural articulating joint; articulating joint test bed and reference truss; static and dynamic characterization completed for space crane reference truss configuration; improved linear actuators reduce articulating joint test bed backlash; 1-DOF space crane slew maneuver; boom 2 tip transient response finite element dynamic model; boom 2 tip transient response shear-corrected component modes torque driver profile; peak root member force vs. slew time torque driver profile; and open loop control of space crane motion.

  15. [Peracute mortality in common cranes (Grus grus)].

    PubMed

    Prange, H; Jonas, K; Gottschalk, C; Discher, U; Ribbeck, E; Mewes, W

    2000-01-01

    Out of a nonbreeding group of cranes, 10 birds died peracutely at the end of April 1998. The pathological investigation showed changes in the intestine, liver and kidneys caused probably by an intoxication; but corresponding analyses did not result in a specified poison. The proof of E. coli, Cl. perfringens and Campylobacter jejuni is to be interpreted as a subordinate result. 7 of 8 cranes had a low to high infestation with endoparasites (Porrocaeum spp., Eimeria pusilla, Echinostoma spp.). 5 of 8 birds showed leaness, possibly as a result of the migration exertion. Further on, the analysis results of a 9th crane found at another place are included in this paper.

  16. Compendium of crane behavior. Part 1: Individual (nonsocial) behavior

    USGS Publications Warehouse

    Ellis, D.H.; Archibald, George W.; Swengel, S.R.; Kepler, C.B.; Harris, James

    1991-01-01

    This paper provides the organizational framework, nomenclature, and abbreviated descriptions for all conspicuous nonsocial behavioral units for all 15 species of crane. We present eight generalized functional classes of behavior. These classes include about 90 discrete motor patterns that constitute the nonsocial repertoire of all cranes. We present this compendium to facilitate information exchanges among students of crane behavior and to encourage interest in future detailed studies of the descriptive ethology of each species.

  17. 29 CFR 1918.55 - Cranes (See also § 1918.11).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Cranes (See also § 1918.11). 1918.55 Section 1918.55 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Vessel's Cargo Handling Gear § 1918.55 Cranes (See also § 1918.11). The following requirements shall apply to the use of cranes forming part of a vessel's...

  18. A sociogram for the cranes of the world.

    PubMed

    Ellis, D H; Swengel, S R; Archibald, G W; Kepler, C B

    1998-05-01

    The behavioral repertoire for the world's 15 species of cranes includes over 100 behavioral acts with clear social significance. Each species performs at least 60 discrete social postures, vocalizations, displays, and activities. Because all but a handful of the stereotyped social displays are common to all species, the presence or absence of social displays was useful only to a limited degree in comparing the relatedness of established crane taxonomic groups. However, the breadth of the repertoire for each species and for the family Gruidae tentatively places cranes at the apex of social complexity (at least for stereotyped displays) in the animal world.

  19. A sociogram for the cranes of the world

    USGS Publications Warehouse

    Ellis, D.H.; Swengel, S.R.; Archibald, George W.; Kepler, C.B.

    1998-01-01

    The behavioral repertoire for the world's 15 species of cranes includes over 100 behavioral acts with clear social significance. Each species performs at least 60 discrete social postures, vocalizations, displays, and activities. Because all but a handful of the stereotyped social displays are common to all species, the presence or absence of social displays was useful only to a limited degree in comparing the relatedness of established crane taxonomic groups. However, the breadth of the repertoire for each species and for the family Gruidae tentatively places cranes at the apex of social complexity (at least for stereotyped displays) in the animal world.

  20. [Genetic passportization and identification of Siberian cranes (Grus leucogeranus Pallas) in captivity].

    PubMed

    Mudrik, E A; Kashentseva, T A; Gamburg, E A; Politov, D V

    2014-01-01

    The genetic diversity of the founders of an artificial population of the Siberian crane Grus leucogeranus Pallas (rare species of cranes) was characterized using 10 microsatellite loci. It was established that the allelic diversity (on average, 5.9 alleles per locus) and genic (H(o) = 0.739) diversity of the Siberian crane is rather high and comparable with the estimations for natural populations of different crane species. Genetic passportization of the birds (119 individuals) from the register of the Siberian crane International Studbook was carried out at the initial stage. The efficiency of genetic passportization for individual identification, identification of the origin, paternity analysis, and exclusion of inbreeding was demonstrated in Siberian cranes under natural mating and artificial insemination. Cases of natural reproduction in pairs of Siberian cranes imprinted to the human and continuous storage of spermatozoa in the female reproductive ducts were registered.

  1. On the selection of gantry and collimator angles for isocenter localization using Winston-Lutz tests.

    PubMed

    Du, Weiliang; Johnson, Jennifer L; Jiang, Wei; Kudchadker, Rajat J

    2016-01-08

    In Winston-Lutz (WL) tests, the isocenter of a linear accelerator (linac) is determined as the intersection of radiation central axes (CAX) from multiple gantry, collimator, and couch angles. It is well known that the CAX can wobble due to mechanical imperfections of the linac. Previous studies suggested that the wobble varies with gantry and collimator angles. Therefore, the isocenter determined in the WL tests has a profound dependence on the gantry and collimator angles at which CAX are sampled. In this study, we evaluated the systematic and random errors in the iso-centers determined with different CAX sampling schemes. Digital WL tests were performed on six linacs. For each WL test, 63 CAX were sampled at nine gantry angles and seven collimator angles. Subsets of these data were used to simulate the effects of various CAX sampling schemes. An isocenter was calculated from each subset of CAX and compared against the reference isocenter, which was calculated from 48 opposing CAX. The differences between the calculated isocenters and the reference isocenters ranged from 0 to 0.8 mm. The differences diminished to less than 0.2 mm when 24 or more CAX were sampled. Isocenters determined with collimator 0° were vertically lower than those determined with collimator 90° and 270°. Isocenter localization errors in the longitudinal direction (along the axis of gantry rotation) showed a strong dependence on the collimator angle selected. The errors in all directions were significantly reduced when opposing collimator angles and opposing gantry angles were employed. The isocenter localization errors were less than 0.2 mm with the common CAX sampling scheme, which used four cardinal gantry angles and two opposing collimator angles. Reproducibility stud-ies on one linac showed that the mean and maximum variations of CAX during the WL tests were 0.053 mm and 0.30 mm, respectively. The maximal variation in the resulting isocenters was 0.068 mm if 48 CAX were used, or 0

  2. Infectious and parasitic diseases of cranes: Principles of treatment and prevention

    USGS Publications Warehouse

    Carpenter, James W.; Derrickson, Scott R.; Archibald, George W.; Pasquier, Roger F.

    1987-01-01

    Little is known of the incidence and pathogenic effects of infectious and parasitic diseases in the world's 15 crane species. in addition to being a primary cause of crane morality, diseases increase the susceptibility of an animal to depredation, malnutrition, accidents, and other mortality factors and reduces its chances of survival during times of stress. Although the treatment and control of diseases of wild cranes is difficult, the management of captive cranes is becoming more and more successful through the use of intensive husbandry, preventative medicine, and parasite control programs. this paper describes some of the infectious and parasitic diseases of wild and captive cranes and outlines management principles for their control, especially in confinement.

  3. Observation of sandhill cranes' (Grus canadensis) flight behavior in heavy fog

    USGS Publications Warehouse

    Kirsch, Eileen M.; Wellik, Mike J.; Suarez, Manuel J.; Diehl, Robert H.; Lutes, Jim; Woyczik, Wendy; Krapfl, Jon; Sojda, Richard S.

    2015-01-01

    The behaviors of birds flying in low visibility conditions remain poorly understood. We had the opportunity to monitor Sandhill Cranes (Grus canadensis) flying in heavy fog with very low visibility during a comprehensive landscape use study of refuging cranes in the Horicon Marsh in southeastern Wisconsin. As part of the study, we recorded flight patterns of cranes with a portable marine radar at various locations and times of day, and visually counted cranes as they departed the roost in the morning. We compared flight patterns during a fog event with those recorded during clear conditions. In good visibility, cranes usually departed the night roost shortly after sunrise and flew in relatively straight paths toward foraging areas. In fog, cranes departed the roost later in the day, did not venture far from the roost, engaged in significantly more circling flight, and returned to the roost site rather than proceeding to foraging areas. We also noted that compared to mornings with good visibility, cranes flying in fog called more frequently than usual. The only time in this 2-year study that observers heard young of the year calling was during the fog event. The observed behavior of cranes circling and lingering in an area while flying in poor visibility conditions suggests that such situations may increase chances of colliding with natural or anthropogenic obstacles in the vicinity.

  4. A records system for a captive crane flock

    USGS Publications Warehouse

    Ellis, D.H.; Hartman, L.; Hereford, Scott G.; McMillen, J.L.; Harris, James

    1991-01-01

    Crane record keeping systems have been evolving at the Patuxent Wildlife Research Center (PWRC) since 1966 and at the International Crane Foundation (ICF) since 1974. The system we present here, a hybrid of the two systems, has been reorganized to promote easy access of information and to limit redundancy.

  5. 46 CFR 107.259 - Crane inspection and testing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

  6. 46 CFR 107.259 - Crane inspection and testing.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

  7. 46 CFR 107.259 - Crane inspection and testing.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

  8. 46 CFR 107.259 - Crane inspection and testing.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

  9. 46 CFR 107.259 - Crane inspection and testing.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane inspection and testing. 107.259 Section 107.259 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS....I.) Recommended Practice for Operation and Maintenance of Offshore Cranes, API RP 2D, First Edition...

  10. Karyotype and identification of sex in two endangered crane species

    USGS Publications Warehouse

    Goodpasture, C.; Seluja, G.; Gee, G.; Wood, Don A.

    1992-01-01

    A laboratory procedure for sex identification of monomorphic birds was developed using modern cytological methods of detecting chromosome abnormalities in human amniotic fluid samples. A pin feather is taken from a pre-fledging bird for tissue culture and karyotype analysis. Through this method, the sex was identified and the karyotype described of the whooping crane (Grus americana) and the Mississippi sandhill crane (G. canadensis pulla). Giemsa-stained karyotypes of these species showed an identical chromosome constitution with 2n = 78 + 2. However, differences in the amount of centromeric heterochromatin were observed in the Mississippi sandhill crane when compared to the whooping crane C-banded karyotype.

  11. The influence of diet composition upon growth and development of sandhill cranes

    USGS Publications Warehouse

    Serafin, J.A.

    1982-01-01

    Experiments were conducted to evaluate the effect of protein, metabolizable energy, and sulfur amino acid content of five diets upon growth and development of captive Florida Sandhill Crane (Grus canadensis pratensis) and Greater Sandhill Crane (G. c. tabida) chicks raised under controlled conditions. A high protein (32%) diet resulted in faster growth than that obtained when a lower protein (24%) ration was supplied. Florida Sandhill Crane chicks fed a diet containing 2,160 kcal/kg grew significantly slower than chicks fed a ration containing 2,830 kcal/kg. Reducing the sulfur amino acid content of a ration containing 24% protein from 0.88% to 0.73% significantly slowed the growth of young cranes. A 17% incidence of leg disorders and a 25% incidence of wing abnormalities occurred between 7 and 28 days of age among Greater Sandhill Cranes fed a high protein diet. Florida Sandhill Cranes grew slower than Greater Sandhill Cranes irrespective of the type of ration they were provided and did not develop leg or wing abnormalities. Abnormalities invariably developed only in the most rapidly growing Greater Sandhill Cranes. Diets that promoted slower growth reduced the incidence of abnormalities. A ration formulated to contain a low (0.73%) sulfur amino acid level appeared to be the most suitable for slowing growth rates of captive-reared Sandhill Cranes and reducing the risk of abnormaiwing or leg development.

  12. Crane-Load Contact Sensor

    NASA Technical Reports Server (NTRS)

    Youngquist, Robert; Mata, Carlos; Cox, Robert

    2005-01-01

    An electronic instrument has been developed as a prototype of a portable crane-load contact sensor. Such a sensor could be helpful in an application in which the load rests on a base in a horizontal position determined by vertical alignment pins (see Figure 1). If the crane is not positioned to lift the load precisely vertically, then the load can be expected to swing once it has been lifted clear of the pins. If the load is especially heavy, large, and/or fragile, it could hurt workers and/or damage itself and nearby objects. By indicating whether the load remains in contact with the pins when it has been lifted a fraction of the length of the pins, the crane-load contact sensor helps the crane operator determine whether it is safe to lift the load clear of the pins: If there is contact, then the load is resting against the sides of the pins and, hence, it may not be safe to lift; if contact is occasionally broken, then the load is probably not resting against the pins, so it should be safe to lift. It is assumed that the load and base, or at least the pins and the surfaces of the alignment holes in the load, are electrically conductive, so the instrument can use electrical contact to indicate mechanical contact. However, DC resistance cannot be used as an indicator of contact for the following reasons: The load and the base are both electrically grounded through cables (the load is grounded through the lifting cable of the crane) to prevent discharge of static electricity. In other words, the DC resistance between the load and the pins is always low, as though they were always in direct contact. Therefore, instead of DC resistance, the instrument utilizes the AC electrical impedance between the pins and the load. The signal frequency used in the measurement is high enough (.1 MHz) that the impedance contributed by the cables and the electrical ground network of the building in which the crane and the base are situated is significantly greater than the contact

  13. 46 CFR 107.309 - Crane plans and information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

  14. 46 CFR 107.309 - Crane plans and information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

  15. 46 CFR 107.309 - Crane plans and information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

  16. 46 CFR 107.309 - Crane plans and information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

  17. 46 CFR 107.309 - Crane plans and information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Crane plans and information. 107.309 Section 107.309 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Plan Approval § 107.309 Crane plans and information. (a) Three copies of each of...

  18. 29 CFR 1919.72 - Annual examination of cranes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Annual examination of cranes. 1919.72 Section 1919.72 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... examination of cranes. (a) In any year in which no quadrennial unit proof test is required, an examination...

  19. 29 CFR 1919.72 - Annual examination of cranes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Annual examination of cranes. 1919.72 Section 1919.72 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... examination of cranes. (a) In any year in which no quadrennial unit proof test is required, an examination...

  20. Suspected fusariomycotoxicosis in sandhill cranes (Grus canadensis): clinical and pathological findings.

    USGS Publications Warehouse

    Roffe, Thomas J.; Stroud, Richard K.; Windingstad, Ronald M.

    1989-01-01

    In 1985 and 1986, large-scale natural die-offs of sandhill cranes in Texas were attributed to fusariomycotoxicosis. These birds demonstrated a progressive loss of motor control to the neck, wings, and legs. Based on necropsy and/or histopathology of 31 cranes, the most common lesions involved skeletal muscle and included hemorrhages, granulomatous myositis, thrombosis, and vascular degeneration. Serum chemistry results revealed that levels of creatinine kinase, aspartate aminotransferase, and alanine aminotransferase were above published normals. However, only alanine aminotransferase was higher in clinically affected cranes than in normal cranes collected from the same area.

  1. Sandhill crane roost selection, human disturbance, and forage resources

    USGS Publications Warehouse

    Pearse, Aaron T.; Krapu, Gary; Brandt, David

    2017-01-01

    Sites used for roosting represent a key habitat requirement for many species of birds because availability and quality of roost sites can influence individual fitness. Birds select roost sites based on numerous factors, requirements, and motivations, and selection of roosts can be dynamic in time and space because of various ecological and environmental influences. For sandhill cranes (Antigone canadensis) at their main spring-staging area along the Platte River in south-central Nebraska, USA, past investigations of roosting cranes focused on physical channel characteristics related to perceived security as motivating roost distribution. We used 6,310 roost sites selected by 313 sandhill cranes over 5 spring migration seasons (2003–2007) to quantify resource selection functions of roost sites on the central Platte River using a discrete choice analysis. Sandhill cranes generally showed stronger selection for wider channels with shorter bank vegetation situated farther from potential human disturbance features such as roads, bridges, and dwellings. Furthermore, selection for roost sites with preferable physical characteristics (wide channels with short bank vegetation) was more resilient to nearby disturbance features than more narrow channels with taller bank vegetation. The amount of cornfields surrounding sandhill crane roost sites positively influenced relative probability of use but only for more narrow channels < 100 m and those with shorter bank vegetation. We confirmed key resource features that sandhill cranes selected at river channels along the Platte River, and after incorporating spatial variation due to human disturbance, our understanding of roost site selection was more robust, providing insights on how disturbance may interact with physical habitat features. Managers can use information on roost-site selection when developing plans to increase probability of crane use at existing roost sites and to identify new areas for potential use if

  2. SU-G-TeP2-04: Comprehensive Machine Isocenter Evaluation with Separation of Gantry, Collimator, and Table Variables

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hancock, S; Clements, C; Hyer, D

    2016-06-15

    Purpose: To develop and demonstrate application of a method that characterizes deviation of linac x-ray beams from the centroid of the volumetric radiation isocenter as a function of gantry, collimator, and table variables. Methods: A set of Winston-Lutz ball-bearing images was used to determine the gantry radiation isocenter as the midrange of deviation values resulting from gantry and collimator rotation. Also determined were displacement of table axis from gantry isocenter and recommended table axis adjustment. The method, previously reported, has been extended to include the effect of collimator walkout by obtaining measurements with 0 and 180 degree collimator rotation formore » each gantry angle. Twelve images were used to characterize the volumetric isocenter for the full range of available gantry, collimator, and table rotations. Results: Three Varian True Beam, two Elekta Infinity and four Versa HD linacs at five institutions were tested using identical methodology. Varian linacs exhibited substantially less deviation due to head sag than Elekta linacs (0.4 mm vs. 1.2 mm on average). One linac from each manufacturer had additional isocenter deviation of 0.3 to 0.4 mm due to jaw instability with gantry and collimator rotation. For all linacs, the achievable isocenter tolerance was dependent on adjustment of collimator position offset, transverse position steering, and alignment of the table axis with gantry isocenter, facilitated by these test results. The pattern and magnitude of table axis wobble vs. table angle was reproducible and unique to each machine. Conclusion: This new method provides a comprehensive set of isocenter deviation values including all variables. It effectively facilitates minimization of deviation between beam center and target (ball-bearing) position. This method was used to quantify the effect of jaw instability on isocenter deviation and to identify the offending jaw. The test is suitable for incorporation into a routine machine

  3. Pendulation control system and method for rotary boom cranes

    DOEpatents

    Robinett, III, Rush D.; Groom, Kenneth N.; Feddema, John T.; Parker, Gordon G.

    2002-01-01

    A command shaping control system and method for rotary boom cranes provides a way to reduce payload pendulation caused by real-time input signals, from either operator command or automated crane maneuvers. The method can take input commands and can apply a command shaping filter to reduce contributors to payload pendulation due to rotation, elevation, and hoisting movements in order to control crane response and reduce tangential and radial payload pendulation. A filter can be applied to a pendulation excitation frequency to reduce residual radial pendulation and tangential pendulation amplitudes.

  4. 30 CFR 57.16015 - Work or travel on overhead crane bridges.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Work or travel on overhead crane bridges. 57... MINES Materials Storage and Handling § 57.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with...

  5. 30 CFR 56.16015 - Work or travel on overhead crane bridges.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Work or travel on overhead crane bridges. 56... Materials Storage and Handling § 56.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with substantial...

  6. 30 CFR 57.16015 - Work or travel on overhead crane bridges.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Work or travel on overhead crane bridges. 57... MINES Materials Storage and Handling § 57.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with...

  7. 30 CFR 56.16015 - Work or travel on overhead crane bridges.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Work or travel on overhead crane bridges. 56... Materials Storage and Handling § 56.16015 Work or travel on overhead crane bridges. No person shall work from or travel on the bridge of an overhead crane unless the bridge is provided with substantial...

  8. Comparative assessment of anti-sway control strategy for tower crane system

    NASA Astrophysics Data System (ADS)

    Samin, Reza Ezuan; Mohamed, Zaharuddin

    2017-09-01

    Tower crane is also known as rotary crane and widely used in constructions due to limited human capability to carry the various types of load at the construction site. In general crane is used for the purpose of loading and unloading heavy material from one place to another. However, in order to transfer the material in minimum time from one location to another, swaying of the payload will occur. Hence, this research presents the investigation of tower crane system which mainly focusing on the swaying angle of the payload by implementing conventional and intelligent controllers. Its mathematical modeling is developed using the Newton's Second Law and simulation is done within the MATLAB/Simulink environment. Simulation results are presented in cart trajectory capability and payload sway angle reduction. A comparative assessment between conventional controller and intelligent controller for the tower crane system are presented and discussed. Furthermore, the effect of various rope length and payload mass of the tower crane system to the performance of trajectory capability and sway angle reduction are also presented and discussed.

  9. The Influence of Gantry Geometry on Aliasing and Other Geometry Dependent Errors

    NASA Astrophysics Data System (ADS)

    Joseph, Peter M.

    1980-06-01

    At least three gantry geometries are widely used in medical CT scanners: (1) rotate-translate, (2) rotating detectors, (3) stationary detectors. There are significant geometrical differences between these designs, especially regarding (a) the region of space scanned by any given detector and (b) the sample density of rays which scan the patient. It is imperative to distinguish between "views" and "rays" in analyzing this situation. In particular, views are defined by the x-ray source in type 2 and by the detector in type 3 gantries. It is known that ray dependent errors are generally much more important than view dependent errors. It is shown that spatial resolution is primarily limited by the spacing between rays in any view, while the number of ray samples per beam width determines the extent of aliasing artifacts. Rotating detector gantries are especially susceptible to aliasing effects. It is shown that aliasing effects can distort the point spread function in a way that is highly dependent on the position of the point in the scanned field. Such effects can cause anomalies in the MTF functions as derived from points in machines with significant aliasing problems.

  10. Anthropometric assessment of crane cabins and recommendations for design: A case study.

    PubMed

    Zunjic, Aleksandar; Brkic, Vesna Spasojevic; Klarin, Milivoj; Brkic, Aleksandar; Krstic, Dragan

    2015-01-01

    Work of crane operators is very difficult and demanding. Therefore, it is very important that the cabin of a crane be designed on the basis of relevant anthropometric data. However, it is very difficult to find a research that considers anthropometric convenience of crane cabins. From the theoretical viewpoint, it is important to perceive and to classify effects of the anthropometric incompatibility of crane cabins. Globally, the objective is to consider the anthropometric convenience of existing crane cabins, and possibilities for improvements of their design from the ergonomic point of view. In this regard, it is significant to detect constraints that impede or hinder the work of the crane operators, which could be overcome with certain anthropometric solutions. The main objective is to examine whether and to what extent is justifiable to use anthropometric data that are obtained on the basis of general (national) population, during designing the crane cabins. For the assessment of existing crane cabins and the work of operators, four methods were used: observation of the work of the operators and design solutions of the cabins, the checklist approach, interviewing of operators and the experimental research based on obtaining the data on the population of crane operators. Results of the analysis based on the method of observation, analysis based on the application of the checklist, as well as interviewing of the operators indicate that certain construction constraints of the components in the cabins are the main reasons of reduced visibility and improper working postures of operators. All this has caused the emergence of continuous musculoskeletal loading of the crane operators. The results of the anthropometric research that were obtained on the population of crane operators in this case study suggest that there is a statistically significant difference, when compared data of this population of workers with anthropometric data from the general population

  11. Pathology and pathogenesis of disseminated visceral coccidiosis in cranes.

    PubMed

    Novilla, Meliton N; Carpenter, James W

    2004-06-01

    Disseminated visceral coccidiosis (DVC) caused by Eimeria spp. was recognized as a disease entity in captive sandhill cranes (Grus canadensis) and whooping cranes (Grus americana) in the late 1970s. While most avian species of Eimeria inhabit the intestinal tract of its host, the crane eimerians, Eimeria reichenowi and Eimeria gruis, invade and multiply systemically and complete their development in both digestive and respiratory tracts. In DVC, cranes, especially chicks, may succumb to acute infections resulting in hepatitis, bronchopneumonia, myocarditis, splenitis, and enteritis. Cranes may also develop chronic, subclinical infections characterized by granulomatous nodules in various organs and tissues. This paper reviews the pathology and pathogenicity of natural and experimental DVC in sandhill and whooping cranes. Naturally infected birds appeared clinically normal, but progressive weakness, emaciation, greenish diarrhea, and recumbency before death were observed in birds administered doses > or = 10 x 10(3) sporulated oocysts per os. At necropsy, naturally infected birds had nodules in the mucosa of the oral cavity and the esophagus, and in thoracic and abdominal viscera. Experimentally infected birds necropsied less than 7 days after infection (a.i.) had no gross lesions. Birds examined later had hepatosplenomegaly, liver mottling, lung congestion and consolidation with frothy fluid in airways, and turgid intestinal tracts with hyperemic mucosa. From 28 days a.i., grossly visible granulomatous nodules were seen in the esophagus, heart, liver, cloaca, and eyelids. By light microscopy, the basic host response was a granulomatous inflammation with non-suppurative vasculitis affecting many organs and tissues. With time, multifocal aggregates of mononuclear cells, many laden with asexual coccidial stages, increased in size and number. Widespread merogony resulted in morbidity and death, particularly in birds administered 20 x 10(3) sporulated oocysts

  12. Iatrogenic salt poisoning in captive sandhill cranes

    USGS Publications Warehouse

    Franson, J.C.; Sileo, L.; Fleming, W.J.

    1981-01-01

    Salt poisoning developed in captive sandhill cranes (Grus canadensis) when sea salt was added to normal drinking water to produce a sodium chloride concentration of 1%. Two of 18 cranes died and 2 were euthanatized when moribund. Muscle weakness, paresis, dyspnea, and depression were observed. Brain and serum sodium, serum uric acid,:and plasma osmolality values were abnormally high. Lesions were those of visceral gout, renal tubular necrosis, nephrosis, and skeletal muscle.necrosis.

  13. Annual survival rate estimate of satellite transmitter–marked eastern population greater sandhill cranes

    USGS Publications Warehouse

    Fronczak, David L.; Andersen, David E.; Hanna, Everett E.; Cooper, Thomas R.

    2015-01-01

    Several surveys have documented the increasing population size and geographic distribution of Eastern Population greater sandhill cranes Grus canadensis tabida since the 1960s. Sport hunting of this population of sandhill cranes started in 2012 following the provisions of the Eastern Population Sandhill Crane Management Plan. However, there are currently no published estimates of Eastern Population sandhill crane survival rate that can be used to inform harvest management. As part of two studies of Eastern Population sandhill crane migration, we deployed solar-powered global positioning system platform transmitting terminals on Eastern Population sandhill cranes (n  =  42) at key concentration areas from 2009 to 2012. We estimated an annual survival rate for Eastern Population sandhill cranes from data resulting from monitoring these cranes by using the known-fates model in the MARK program. Estimated annual survival rate for adult Eastern Population sandhill cranes was 0.950 (95% confidence interval  =  0.885–0.979) during December 2009–August 2014. All fatalities (n  =  5) occurred after spring migration in late spring and early summer. We were unable to determine cause of death for crane fatalities in our study. Our survival rate estimate will be useful when combined with other population parameters such as the population index derived from the U.S. Fish and Wildlife Service fall survey, harvest, and recruitment rates to assess the effects of harvest on population size and trend and evaluate the effectiveness of management strategies.

  14. Conceptual design of a multiple cable crane for planetary surface operations

    NASA Technical Reports Server (NTRS)

    Mikulas, Martin M., Jr.; Yang, Li-Farn

    1991-01-01

    A preliminary design study is presented of a mobile crane suitable for conducting remote, automated construction operations on planetary surfaces. A cursory study was made of earth based mobile cranes and the needs for major improvements were identified. Current earth based cranes have a single cable supporting the payload, and precision positioning is accomplished by the use of construction workers controlling the payload by the use of tethers. For remote, autonomous operations on planetary surfaces it will be necessary to perform the precision operations without the use of humans. To accomplish this the payload must be stabilized relative to the crane. One approach for accomplishing this is to suspend the payload on multiple cable. A 3-cable suspension system crane concept is discussed. An analysis of the natural frequency of the system is presented which verifies the legitimacy of the concept.

  15. Fusarium mycotoxins from peanuts suspected as a cause of sandhill crane mortality

    USGS Publications Warehouse

    Windingstad, R.M.; Cole, R.J.; Nelson, P.E.; Roffe, T.J.; George, R.R.; Dorner, J.W.

    1989-01-01

    An estimated 9,500 sandhill cranes (Grus canadensis) died in Gaines County, Texas and Roosevelt County, New Mexico between 1982 and 1987. The predominant clinical sign observed in sick cranes was their inability to hold their heads erect, both while standing and flying. Multiple muscle hemorrhages and submandibular edema were the most common lesions seen at necropsy. Mycotoxins produced by Fusarium sp. growing during cold, wet weather on peanuts left in the field after harvest, the predominant foods of the dead cranes at the time of these mortality events, were identified as the most likely cause of this mortality. Rendering moldy peanuts inaccessible to the cranes by conventional tillage resulted in reduced crane mortality in these areas.

  16. Development and Evaluation of a Quantitative PCR Assay Targeting Sandhill Crane (Grus canadensis) Fecal Pollution

    PubMed Central

    Ryu, Hodon; Lu, Jingrang; Vogel, Jason; Elk, Michael; Chávez-Ramírez, Felipe; Ashbolt, Nicholas

    2012-01-01

    While the microbial water quality in the Platte River is seasonally impacted by excreta from migrating cranes, there are no methods available to study crane fecal contamination. Here we characterized microbial populations in crane feces using phylogenetic analysis of 16S rRNA gene fecal clone libraries. Using these sequences, a novel crane quantitative PCR (Crane1) assay was developed, and its applicability as a microbial source tracking (MST) assay was evaluated by determining its host specificity and detection ability in environmental waters. Bacteria from crane excreta were dominated by bacilli and proteobacteria, with a notable paucity of sequences homologous to Bacteroidetes and Clostridia. The Crane1 marker targeted a dominant clade of unclassified Lactobacillales sequences closely related to Catellicoccus marimammalium. The host distribution of the Crane1 marker was relatively high, being positive for 69% (66/96) of the crane excreta samples tested. The assay also showed high host specificity, with 95% of the nontarget fecal samples (i.e., n = 553; 20 different free-range hosts) being negative. Of the presumed crane-impacted water samples (n = 16), 88% were positive for the Crane1 assay, whereas none of the water samples not impacted by cranes were positive (n = 165). Bayesian statistical models of the Crane1 MST marker demonstrated high confidence in detecting true-positive signals and a low probability of false-negative signals from environmental water samples. Altogether, these data suggest that the newly developed marker could be used in environmental monitoring studies to study crane fecal pollution dynamics. PMID:22492437

  17. Habitat preferences and conservation threats to Black-necked Cranes wintering in Bhutan.

    PubMed

    Namgay, Rinchen; Wangchuk, Sangay

    2016-01-01

    Black-necked Crane (Grus nigricollis) is a vulnerable Red list species whose populations are declining. However, little is known about Black-necked Cranes' habitat requirements or the causes of their population decline. We identified Black-necked Cranes' winter roost and foraging preferences of Black-necked Cranes in Bhutan during the winter of 2013-2014. Black-necked Cranes' roosts were recorded using Garmin GPSmap 60CSx, while foraging preferences and threats to the birds were identified based on a survey of household heads (n = 107) residing within a 3 km radius of roost sites. We grouped the threats identified by the communities into four major categories, viz. biological, social, political and natural threats based on the relevance. Of the four major threats, communities residing within the roosting and foraging habitat of the Black-necked Crane reported biological threat as major. Biological threats as reported by communities include loss of habitat, food shortage and competition from other animals. We recommend the present roosting areas be designated as part of the conservation areas for Black-necked Crane wintering in Bumthang district. In addition to preserving these areas, government should also encourage farming in foraging habitats of Black-necked Crane, because they mainly feed on barley, wheat, paddy, potatoes and buckwheat, besides roots, tubers and insects in the wetlands.

  18. FOUNDRY LANDSCAPE LOOKING SOUTHWEST FROM MALLEABLE STOCK YARD CRANE SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FOUNDRY LANDSCAPE LOOKING SOUTHWEST FROM MALLEABLE STOCK YARD CRANE SHOWING CRANE RAILS, GREY IRON CUPOLA AND EMISSION RECOVERY SYSTEM. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  19. Mortality of globally threatened Sarus cranes Grus antigon from monocrotophos poisoning in India.

    PubMed

    Pain, D J; Gargi, R; Cunningham, A A; Jones, A; Prakash, V

    2004-06-29

    Globally threatened Sarus cranes Grus antigon are resident at Keoladeo National Park World Heritage site and the surrounding area near Bharatpur, Western Rajasthan, India. In winter, they are joined by c. 200 wintering common cranes Grus grus. On 23 November 2000, 15 Sarus cranes and three common cranes were found dead in a field adjacent to the park, where wheat seed had been sown the previous day. Chemical analyses of seed samples from the field and the cranes' alimentary tract contents identified residues of the organophosphate insecticide monocrotophos. Monocrotophos concentrations of 0.8 and 1.8 ppm were found in wheat samples, and 0.2-0.74 ppm (x=0.33) in the alimentary tract contents of five of the seven cranes examined. No other organophosphate or organochlorine pesticides were detected. We conclude that the cranes died from monocrotophos poisoning after eating treated seed. We discuss similar incidents of avian mortality, and recommend that measures be taken to reduce these. Copryright 2003 Elsevier B.V.

  20. Analysis of frame structure of medium and small truck crane

    NASA Astrophysics Data System (ADS)

    Cao, Fuyi; Li, Jinlong; Cui, Mengkai

    2018-03-01

    Truck crane is an important part of hoisting machinery. Frame, as the support component of the quality of truck crane, determines the safety of crane jib load and the rationality of structural design. In this paper, the truck crane frame is a box structure, the three-dimensional model is established in CATIA software, and imported into Hyperworks software for finite element analysis. On the base of doing constraints and loads for the finite element model of the frame, the finite element static analysis is carried out. And the static stress test verifies whether the finite element model and the frame structure design are reasonable; then the free modal analysis of the frame and the analysis of the first 8 - order modal vibration deformation are carried out. The analysis results show that the maximum stress value of the frame is greater than the yield limit value of the material, and the low-order modal value is close to the excitation frequency value, which needs to be improved to provide theoretical reference for the structural design of the truck crane frame.

  1. 76 FR 66617 - Airworthiness Directives; Erickson Air-Crane Incorporated Model S-64F Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-27

    ... Airworthiness Directives; Erickson Air-Crane Incorporated Model S-64F Helicopters AGENCY: Federal Aviation... the Erickson Air-Crane (Erickson Air-Crane) Model S-64F helicopters. The amendment requires, at..., contact Erickson Air-Crane Incorporated, 3100 Willow Springs Road, P.O. Box 3247, Central Point, OR 97502...

  2. Fatal injuries in the United States construction industry involving cranes 1984-1994.

    PubMed

    Suruda, A; Liu, D; Egger, M; Lillquist, D

    1999-12-01

    There is little published information concerning the epidemiology of injuries in the construction industry involving cranes other than for electrical injury from power line contact. For the 11-year period of 1984 through 1994, the US Occupational Safety and Health Administration (OSHA) investigated 502 deaths in 479 incidents involving cranes in the construction industry. Electrocution was the largest category, with 198 deaths (39%) reported. Other major categories were assembly/dismantling (58 deaths, 12%), boom buckling (41 deaths, 8%), crane upset/overturn (37 deaths, 7%), and rigging failure (36 deaths, 7%). The majority of the deaths during assembly/dismantling involved removal of the boom pins from lattice boom cranes. Only 34% of the construction firms employing the fatally injured workers had ever been inspected by OSHA. OSHA cited the employer for safety violations in 436 deaths (83%). Additional worker training, increased OSHA inspections, and crane inspection programs could prevent many crane-related deaths.

  3. Hydrological Modelling for Siberian Crane Grus Leucogeranus Stopover Sites in Northeast China

    PubMed Central

    Jiang, Haibo; He, Chunguang; Sheng, Lianxi; Tang, Zhanhui; Wen, Yang; Yan, Tingting; Zou, Changlin

    2015-01-01

    Habitat loss is one of the key factors underlying the decline of many waterbird species, including Siberian Crane (Grus leucogeranus), a threatened species worldwide. Wetlands are the primary stopover for many waterbirds and restoration of these wetlands involves both hydrological restoration and water resource management. To protect the stopover sites of Siberian Cranes, we collected Siberian Crane stopover numbers, meteorological and hydrological data, and remote sensing data from 2008 to 2011 in Momoge National Nature Reserve, one of the largest wetlands in northeastern China. A model was developed to estimate the suitability of Siberian Crane stopover sites. According to our results, the most suitable daily water level for Siberian Cranes between 2008 and 2012 occurred in the spring of 2008 and in the Scirpus planiculmis growing season and autumn of 2010. We suggest a season-dependent water management strategy in order to provide suitable conditions at Siberian Crane stopover sites. PMID:25874552

  4. Sandhill cranes browse for food near VAB

    NASA Technical Reports Server (NTRS)

    2000-01-01

    A family of sandhill cranes searches for food on the grounds near the Vehicle Assembly Building. The cranes have been a constant sight in the Launch Complex 39 area during the month of May. Sandhill cranes range from Siberia, Alaska and Arctic islands to Michigan, Minnesota and California; from Florida to Texas. They prefer large freshwater marshes, prairie ponds and marshy tundra. KSC shares a boundary with the Merritt Island National Wildlife Refuge, which encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects.

  5. Characterization of gizzards and grits of wild cranes found dead at Izumi Plain in Japan

    PubMed Central

    UEGOMORI, Mima; HARAGUCHI, Yuko; OBI, Takeshi; TAKASE, Kozo

    2018-01-01

    We analyzed the gizzards, and grits retained in the gizzards of 41 cranes that migrated to the Izumi Plain during the winter of 2015/2016 and died there, either due to accident or disease. These included 31 Hooded Cranes (Grus monacha) and 10 White-naped Cranes (G. vipio). We determined body weight, gizzard weight, total grit weight and number per gizzard, and size, shape, and surface roundness of the grits. Average gizzard weights were 92.4 g for Hooded Cranes and 97.1 g for White-naped Cranes, and gizzard weight positively correlated with body weight in both species. Average total grit weights per gizzard were 19.7 g in Hooded Cranes and 25.7 g in White-naped Cranes, and were significantly higher in the latter. Average percentages of body weight to grit weight were 0.8% in Hooded Cranes and 0.5% in White-naped Cranes. Average grit number per gizzard was 693.5 in Hooded Cranes and 924.2 in White-naped Cranes, and were significantly higher in the latter. The average grit size was 2.8 mm in both species. No differences were found in the shape and surface roundness of grits between the two species. To the best of our knowledge, this is the first study on the grits retained in the gizzards of Hooded and White-naped Cranes. PMID:29503349

  6. Characterization of gizzards and grits of wild cranes found dead at Izumi Plain in Japan.

    PubMed

    Uegomori, Mima; Haraguchi, Yuko; Obi, Takeshi; Takase, Kozo

    2018-04-18

    We analyzed the gizzards, and grits retained in the gizzards of 41 cranes that migrated to the Izumi Plain during the winter of 2015/2016 and died there, either due to accident or disease. These included 31 Hooded Cranes (Grus monacha) and 10 White-naped Cranes (G. vipio). We determined body weight, gizzard weight, total grit weight and number per gizzard, and size, shape, and surface roundness of the grits. Average gizzard weights were 92.4 g for Hooded Cranes and 97.1 g for White-naped Cranes, and gizzard weight positively correlated with body weight in both species. Average total grit weights per gizzard were 19.7 g in Hooded Cranes and 25.7 g in White-naped Cranes, and were significantly higher in the latter. Average percentages of body weight to grit weight were 0.8% in Hooded Cranes and 0.5% in White-naped Cranes. Average grit number per gizzard was 693.5 in Hooded Cranes and 924.2 in White-naped Cranes, and were significantly higher in the latter. The average grit size was 2.8 mm in both species. No differences were found in the shape and surface roundness of grits between the two species. To the best of our knowledge, this is the first study on the grits retained in the gizzards of Hooded and White-naped Cranes.

  7. Fusarium spp. recovered from waste peanuts associated with sandhill crane mortality

    USGS Publications Warehouse

    Nelson, P.E.; Cole, R.J.; Tousson, T.A.; Dorner, J.W.; Windingstad, R.M.

    1990-01-01

    Approximately 5000 sandhill cranes (Grus canadensis ) died from undetermined causes in Gains County, Texas, 1985, and an additional 200 died in 1986. Prominent clinical signs were the inability of many sick cranes to hold their necks horizontal and the neck, head, and legs sometimes drooped perpendicularly during flight. Approximately 95% of the dead cranes' gizzards contained peanuts. Culturing of peanuts, shells, soil and soil debris from fields in which sandhill cranes died showed that Fusarium species were the fungi most frequently isolated and eight species were recovered from these substrates. Fusarium compactum, F. solani , and F. equiseti were the only species recovered from all substrates cultured from both fields.

  8. Development of a MPPC-based prototype gantry for future MRI-PET scanners

    NASA Astrophysics Data System (ADS)

    Kurei, Y.; Kataoka, J.; Kato, T.; Fujita, T.; Ohshima, T.; Taya, T.; Yamamoto, S.

    2014-12-01

    We have developed a high spatial resolution, compact Positron Emission Tomography (PET) module designed for small animals and intended for use in magnetic resonance imaging (MRI) systems. This module consists of large-area, 4 × 4 ch MPPC arrays (S11830-3344MF; Hamamatsu Photonics K.K.) optically coupled with Ce-doped (Lu,Y)2(SiO4)O (Ce:LYSO) scintillators fabricated into 16 × 16 matrices of 0.5 × 0.5 mm2 pixels. We set the temperature sensor (LM73CIMK-0; National Semiconductor Corp.) at the rear of the MPPC acceptance surface, and apply optimum voltage to maintain the gain. The eight MPPC-based PET modules and coincidence circuits were assembled into a gantry arranged in a ring 90 mm in diameter to form the MPPC-based PET system. We have developed two types PET gantry: one made of non-magnetic metal and the other made of acrylonitrile butadiene styrene (ABS) resins. The PET gantry was positioned around the RF coil of the 4.7 T MRI system. We took an image of a point }22Na source under fast spin echo (FSE) and gradient echo (GE), in order to measure the interference between the MPPC-based PET and MRI. The spatial resolution of PET imaging in a transaxial plane of about 1 mm (FWHM) was achieved in all cases. Operating with PET made of ABS has no effect on MR images, while operating with PET made of non-magnetic metal has a significant detrimental effect on MR images. This paper describes our quantitative evaluations of PET images and MR images, and presents a more advanced version of the gantry for future MRI/DOI-PET systems.

  9. 77 FR 49741 - Cranes and Derricks in Construction: Demolition and Underground Construction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-17

    ... Analysis When it issued the final cranes rule, OSHA prepared a final economic analysis (FEA) as required by... construction and cranes engaged in construction work involving demolition. The FEA for the final cranes..., found that the requirements of the rule were technologically and economically feasible. Because the FEA...

  10. 50 CFR 20.106 - Seasons, limits, and shooting hours for sandhill cranes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... sandhill cranes. 20.106 Section 20.106 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE..., and Shooting Hours Schedules § 20.106 Seasons, limits, and shooting hours for sandhill cranes. This section provides for the annual hunting of sandhill cranes in designated portions of the 48 contiguous...

  11. 50 CFR 20.106 - Seasons, limits, and shooting hours for sandhill cranes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... sandhill cranes. 20.106 Section 20.106 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE..., and Shooting Hours Schedules § 20.106 Seasons, limits, and shooting hours for sandhill cranes. This section provides for the annual hunting of sandhill cranes in designated portions of the 48 contiguous...

  12. Establishing paternity in Whooping Cranes (Grus americana) by DNA analysis

    USGS Publications Warehouse

    Longmire, Jonathan L.; Gee, George F.; Hardekopf, C.L.; Mark, G.A.

    1992-01-01

    DNA fingerprinting was used to study paternity and genetic variability within a captive flock of Whooping Cranes (Grus americana). Fingerprint patterns for 42 individuals were obtained by digesting genomic crane DNAs with HaeIII followed by electrophoresis, blotting, and hybridization to the M13 minisatellite probe. Despite finding reduced levels of genetic variation in the Whooping Crane due to a population "bottleneck," these polymorphisms were successfully used to determine paternity in six of seven cases of captive propagation where the maternal-offspring relationship was known, but where the sire was unknown. These determinations of paternity are required for effective genetic management of the crane flock. These results also revealed a number of heterozygous minisatellite loci that will be valuable in future assessments of genetic variability in this endangered species.

  13. 18. STATIC TEST TOWER VIEW FROM REMOVABLE LEVEL DOWN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. STATIC TEST TOWER - VIEW FROM REMOVABLE LEVEL DOWN TOWARDS GANTRY CRANE AND THREE TEST CELLS. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  14. A space crane concept for performing on-orbit assembly

    NASA Technical Reports Server (NTRS)

    Dorsey, John T.

    1992-01-01

    The topics are presented in viewgraph form and include: in-space assembly and construction enhances future mission planning flexibility; in-space assembly and construction facility concept; space crane concept with mobile base; fundamental characteristics; space crane research approach; spacecraft component positioning and assembly test-bed; and articulating joint testbed.

  15. COMPUTED TOMOGRAPHIC ANATOMY AND CHARACTERISTICS OF RESPIRATORY ASPERGILLOSIS IN JUVENILE WHOOPING CRANES

    PubMed Central

    Kelley, Cristin; Pinkerton, Marie E.; Hartup, Barry K.

    2015-01-01

    Respiratory diseases are a leading cause of morbidity and mortality in captivity reared, endangered whooping cranes (Grus americana). Objectives of this retrospective, case series, cross‐sectional study were to describe computed tomography (CT) respiratory anatomy in a juvenile whooping crane without respiratory disease, compare CT characteristics with gross pathologic characteristics in a group of juvenile whooping cranes with respiratory aspergillosis, and test associations between the number of CT tracheal bends and bird sex and age. A total of 10 juvenile whooping cranes (one control, nine affected) were included. Seven affected cranes had CT characteristics of unilateral extrapulmonary bronchial occlusion or wall thickening, and seven cranes had luminal occlusion of the intrapulmonary primary or secondary bronchi. Air sac membrane thickening was observed in three cranes in the cranial and caudal thoracic air sacs, and air sac diverticulum opacification was observed in four cranes. Necropsy lesions consisted of severe, subacute to chronic, focally extensive granulomatous pathology of the trachea, primary bronchi, lungs, or air sacs. No false positive CT scan results were documented. Seven instances of false negative CT scan results occurred; six of these consisted of subtle, mild air sacculitis including membrane opacification or thickening, or the presence of small plaques found at necropsy. The number of CT tracheal bends was associated with bird age but not sex. Findings supported the use of CT as a diagnostic test for avian species with respiratory disease and tracheal coiling or elongated tracheae where endoscopic evaluation is impractical. PMID:26592357

  16. Comprehensive and Highly Accurate Measurements of Crane Runways, Profiles and Fastenings

    PubMed Central

    Dennig, Dirk; Bureick, Johannes; Link, Johannes; Diener, Dmitri; Hesse, Christian; Neumann, Ingo

    2017-01-01

    The process of surveying crane runways has been continually refined due to the competitive situation, modern surveying instruments, additional sensors, accessories and evaluation procedures. Guidelines, such as the International Organization for Standardization (ISO) 12488-1, define target values that must be determined by survey. For a crane runway these are for example the span, the position and height of the rails. The process has to be objective and reproducible. However, common processes of surveying crane runways do not meet these requirements sufficiently. The evaluation of the protocols, ideally by an expert, requires many years of experience. Additionally, the recording of crucial parameters, e.g., the wear of the rail, or the condition of the rail fastening and rail joints, is not regulated and for that reason are often not considered during the measurement. To solve this deficit the Advanced Rail Track Inspection System (ARTIS) was developed. ARTIS is used to measure the 3D position of crane rails, the cross-section of the crane rails, joints and, for the first time, the (crane-rail) fastenings. The system consists of a monitoring vehicle and an external tracking sensor. It makes kinematic observations with the tracking sensor from outside the rail run, e.g., the floor of an overhead crane runway, possible. In this paper we present stages of the development process of ARTIS, new target values, calibration of sensors and results of a test measurement. PMID:28505076

  17. GANTRY SIGNAL EAST OF TOWER AT MILEPOST 203.0, LOOKING WEST, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GANTRY SIGNAL EAST OF TOWER AT MILEPOST 203.0, LOOKING WEST, EQUIPPED WITH B&O COLOR-POSITION-LIGHT SIGNAL HEAD FOR WESTBOUND TRAINS. - Baltimore & Ohio Railroad, Z Tower, State Route 46, Keyser, Mineral County, WV

  18. Salmonella enteritidis and Arizona hinshawii isolated from wild sandhill cranes

    USGS Publications Warehouse

    Windingstad, R.M.; Trainer, D.O.; Duncan, R.M.

    1977-01-01

    Salmonella enteritidis serotype Rubislaw and Arizona hinshawii were isolated from cloacal swabs of "healthy" live-trapped sandhill cranes (Grus canadensis tabida) in Indiana and Wisconsin. These respective isolations were the first reported from wild sandhill cranes.

  19. Cost-effectiveness analysis of sandhill crane habitat management

    USGS Publications Warehouse

    Kessler, Andrew C.; Merchant, James W.; Shultz, Steven D.; Allen, Craig R.

    2013-01-01

    Invasive species often threaten native wildlife populations and strain the budgets of agencies charged with wildlife management. We demonstrate the potential of cost-effectiveness analysis to improve the efficiency and value of efforts to enhance sandhill crane (Grus canadensis) roosting habitat. We focus on the central Platte River in Nebraska (USA), a region of international ecological importance for migrating avian species including sandhill cranes. Cost-effectiveness analysis is a valuation process designed to compare alternative actions based on the cost of achieving a pre-determined objective. We estimated costs for removal of invasive vegetation using geographic information system simulations and calculated benefits as the increase in area of sandhill crane roosting habitat. We generated cost effectiveness values for removing invasive vegetation on 7 land parcels and for the entire central Platte River to compare the cost-effectiveness of management at specific sites and for the central Platte River landscape. Median cost effectiveness values for the 7 land parcels evaluated suggest that costs for creating 1 additional hectare of sandhill crane roosting habitat totaled US $1,595. By contrast, we found that creating an additional hectare of sandhill crane roosting habitat could cost as much as US $12,010 for some areas in the central Platte River, indicating substantial cost savings can be achieved by using a cost effectiveness analysis to target specific land parcels for management. Cost-effectiveness analysis, used in conjunction with geographic information systems, can provide decision-makers with a new tool for identifying the most economically efficient allocation of resources to achieve habitat management goals.

  20. 29 CFR 1910.179 - Overhead and gantry cranes.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... percent of rated load speed. (b) The bumper shall be so mounted that there is no direct shear on bolts... overstressed. (v) While any employee is on the load or hook, there shall be no hoisting, lowering, or traveling... tried out under no load. Extreme care shall be exercised; the block shall be “inched” into the limit or...

  1. 29 CFR 1910.179 - Overhead and gantry cranes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... percent of rated load speed. (b) The bumper shall be so mounted that there is no direct shear on bolts... overstressed. (v) While any employee is on the load or hook, there shall be no hoisting, lowering, or traveling... tried out under no load. Extreme care shall be exercised; the block shall be “inched” into the limit or...

  2. 29 CFR 1910.179 - Overhead and gantry cranes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... percent of rated load speed. (b) The bumper shall be so mounted that there is no direct shear on bolts... overstressed. (v) While any employee is on the load or hook, there shall be no hoisting, lowering, or traveling... tried out under no load. Extreme care shall be exercised; the block shall be “inched” into the limit or...

  3. 29 CFR 1910.179 - Overhead and gantry cranes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... percent of rated load speed. (b) The bumper shall be so mounted that there is no direct shear on bolts... overstressed. (v) While any employee is on the load or hook, there shall be no hoisting, lowering, or traveling... tried out under no load. Extreme care shall be exercised; the block shall be “inched” into the limit or...

  4. Large Crawler Crane for new lightning protection system

    NASA Image and Video Library

    2007-10-25

    A large crawler crane traveling long one of the crawlerway tracks makes the turn toward Launch Pad 39B. The crane with its 70-foot boom will be used to construct a new lightning protection system for the Constellation Program and Ares/Orion launches. Pad B will be the site of the first Ares vehicle launch, including Ares I-X which is scheduled for April 2009.

  5. Large Crawler Crane for new lightning protection system

    NASA Image and Video Library

    2007-10-25

    A large crawler crane travels along one of the crawlerway tracks on its way to Launch Pad 39B. The crane with its 70-foot boom will be used to construct a new lightning protection system for the Constellation Program and Ares/Orion launches. Pad B will be the site of the first Ares vehicle launch, including Ares I-X which is scheduled for April 2009.

  6. Large Crawler Crane for new lightning protection system

    NASA Image and Video Library

    2007-10-25

    A large crawler crane moves past the Vehicle Assembly Building on its way to Launch Pad 39B. The crane with its 70-foot boom will be used to construct a new lightning protection system for the Constellation Program and Ares/Orion launches. Pad B will be the site of the first Ares vehicle launch, including Ares I-X which is scheduled for April 2009.

  7. 29 CFR 1919.28 - Unit proof tests-cranes and gear accessory thereto.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Unit proof tests-cranes and gear accessory thereto. 1919.28... Loads; Heat Treatment; Competent Persons § 1919.28 Unit proof tests—cranes and gear accessory thereto. (a) Except as noted in paragraph (e) of this section, cranes and other hoisting machines, together...

  8. Impacts of invasive plants on Sandhill Crane (Grus canadensis) roosting habitat

    USGS Publications Warehouse

    Kessler, Andrew C.; Merchant, James W.; Allen, Craig R.; Shultz, Steven D.

    2011-01-01

    Invasive plants continue to spread in riparian ecosystems, causing both ecological and economic damage. This research investigated the impacts of common reed, purple loosestrife, riparian shrubland, and riparian woodlands on the quality and quantity of sandhill crane roosting habitat in the central Platte River, Nebraska, using a discrete choice model. A more detailed investigation of the impacts of common reed on sandhill crane roosting habitat was performed by forecasting a spread or contraction of this invasive plant. The discrete choice model indicates that riparian woodlands had the largest negative impact on sandhill crane roosting habitat. The forecasting results predict that a contraction of common reed could increase sandhill crane habitat availability by 50%, whereas an expansion could reduce the availability by as much as 250%. This suggests that if the distribution of common reed continues to expand in the central Platte River the availability of sandhill crane roosting habitat would likely be greatly reduced.

  9. 46 CFR 107.260 - Rated load test for cranes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

  10. 46 CFR 107.260 - Rated load test for cranes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

  11. 46 CFR 107.260 - Rated load test for cranes.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

  12. 46 CFR 107.260 - Rated load test for cranes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

  13. 46 CFR 107.260 - Rated load test for cranes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Rated load test for cranes. 107.260 Section 107.260 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.260 Rated load test for cranes. (a) To meet...

  14. Conditioning of sandhill cranes during fall migration

    USGS Publications Warehouse

    Krapu, Gary L.; Johnson, Douglas H.

    1990-01-01

    Body mass of adult female and male sandhill cranes (Grus canadensis) increased an average of 17 and 20%, respectively, from early September to late October on staging areas in central North Dakota and varied by year. Increases in body mass averaged 550 and 681 g among female and male G. c. canadensis, respectively, and 616 and 836 g among female and male G. c. rowani. Adult and juvenile G. c. rowani were lean at arrival, averaging 177 and 83 g of fat, respectively, and fat reserves increased to 677 and 482 g by mid-October. Fat-free dry mass increased by 12% among juveniles, reflecting substantial growth, but remained constant among adults. The importance of fall staging areas as conditioning sites for sandhill cranes, annual variation in body mass, and vulnerability of cranes to habitat loss underscore the need to monitor status of fall staging habitat in the northern plains region and to take steps to maintain suitable habitat where necessary.

  15. Sandhill cranes browse for food near VAB

    NASA Technical Reports Server (NTRS)

    2000-01-01

    While the sandhill crane parents search for food in front of the Vehicle Assembly Building, their still-featherless baby nearby tests its voice. The cranes have been a constant sight in the Launch Complex 39 area during the month of May. Sandhill cranes range from Siberia, Alaska and Arctic islands to Michigan, Minnesota and California; from Florida to Texas. They prefer large freshwater marshes, prairie ponds and marshy tundra. KSC shares a boundary with the Merritt Island National Wildlife Refuge, which encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects.

  16. Changes of mercury contamination in red-crowned cranes, Grus japonensis, in East Hokkaido, Japan.

    PubMed

    Teraoka, Hiroki; Tagami, Yukari; Kudo, Moe; Miura, Yoshiaki; Okamoto, Erika; Matsumoto, Fumio; Koga, Kimiya; Uebayashi, Akiko; Shimura, Ryoji; Inoue, Masako; Momose, Kunikazu; Masatomi, Hiroyuki; Kitazawa, Takio; Hiraga, Takeo; Subramanian, Annamalai

    2012-07-01

    Red-crowned cranes (Grus japonensis) are native to eastern Hokkaido (island population), in contrast to the mainland, which migrates between the Amur River basin and eastern China-Korea peninsula. During the 1990s we found that Red-crowned cranes in Hokkaido were highly contaminated with mercury: however, the source was unknown. We investigated the time trend of mercury contamination in Red-crowned cranes. Total mercury levels in the livers and kidneys from cranes dead in the 2000s were lower than those dead in the 1990s. Feather is a major pathway of mercury excretion for many bird species and is used as an indicator of blood mercury level during feather growth. As internal organs from the specimens collected before 1988 were not available, we analyzed the flight feather shavings from stuffed Red-crowned cranes dead in 1959-1987 and found that the mercury level of feathers from cranes dead in the 1960s and 1970s was not more than those from the cranes dead in the 2000s. These results suggest that mercury contamination in Red-crowned cranes in Hokkaido decreased temporally during the 1990s-2000s. This indicates the possible occurrence of some mercury pollution in Red-crowned cranes' habitat in this region in the 1990s or before.

  17. Habitat-dependent changes in vigilance behaviour of Red-crowned Crane influenced by wildlife tourism.

    PubMed

    Li, Donglai; Liu, Yu; Sun, Xinghai; Lloyd, Huw; Zhu, Shuyu; Zhang, Shuyan; Wan, Dongmei; Zhang, Zhengwang

    2017-11-30

    The Endangered Red-crowned Crane (Grus japonensis) is one of the most culturally iconic and sought-after species by wildlife tourists. Here we investigate how the presence of tourists influence the vigilance behaviour of cranes foraging in Suaeda salsa salt marshes and S. salsa/Phragmites australis mosaic habitat in the Yellow River Delta, China. We found that both the frequency and duration of crane vigilance significantly increased in the presence of wildlife tourists. Increased frequency in crane vigilance only occurred in the much taller S. salsa/P. australis mosaic vegetation whereas the duration of vigilance showed no significant difference between the two habitats. Crane vigilance declined with increasing distance from wildlife tourists in the two habitats, with a minimum distance of disturbance triggering a high degree of vigilance by cranes identified at 300 m. The presence of wildlife tourists may represent a form of disturbance to foraging cranes but is habitat dependent. Taller P. australis vegetation serves primarily as a visual obstruction for cranes, causing them to increase the frequency of vigilance behaviour. Our findings have important implications for the conservation of the migratory red-crowned crane population that winters in the Yellow River Delta and can help inform visitor management.

  18. TU-CD-304-04: Scanning Field Total Body Irradiation Using Dynamic Arc with Variable Dose Rate and Gantry Speed

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yi, B; Xu, H; Mutaf, Y

    2015-06-15

    Purpose: Enable a scanning field total body irradiation (TBI) technique, using dynamic arcs, which is biologically equivalent to a moving couch TBI. Methods: Patient is treated slightly above the floor and the treatment field scans across the patient by a moving gantry. MLC positions change during gantry motion to keep same field opening at the level of the treatment plane (170 cm). This is done to mimic the same geometry as the moving couch TBI technique which has been used in our institution for over 10 years. The dose rate and the gantry speed are determined considering a constant speedmore » of the moving field, variations in SSD and slanted depths resulting from oblique gantry angles. An Eclipse (Varian) planning system is commissioned to accommodate the extended SSD. The dosimetric foundations of the technique have been thoroughly investigated using phantom measurements. Results: Dose uniformity better than 2% across 180 cm length at 10cm depth is achieved by moving the gantry from −55 to +55 deg. Treatment range can be extended by increasing gantry range. No device such as a gravity-oriented compensator is needed to achieve a uniform dose. It is feasible to modify the dose distribution by adjusting the dose rate at each gantry angle to compensate for body thickness differences. Total treatment time for 2 Gy AP/PA fields is 40–50 minutes excluding patient set up time, at the machine dose rate of 100 MU/min. Conclusion: This novel yet transportable moving field technique enables TBI treatment in a small treatment room with less program development preparation than other techniques. Treatment length can be extended per need, and. MLC-based thickness compensation and partial lung blocking are also possible.« less

  19. MO-FG-202-04: Gantry-Resolved Linac QA for VMAT: A Comprehensive and Efficient System Using An Electronic Portal Imaging Device

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zwan, B J; University of Newcastle, Newcastle, NSW; Barnes, M

    2016-06-15

    Purpose: To automate gantry-resolved linear accelerator (linac) quality assurance (QA) for volumetric modulated arc therapy (VMAT) using an electronic portal imaging device (EPID). Methods: A QA system for VMAT was developed that uses an EPID, frame-grabber assembly and in-house developed image processing software. The system relies solely on the analysis of EPID image frames acquired without the presence of a phantom. Images were acquired at 8.41 frames per second using a frame grabber and ancillary acquisition computer. Each image frame was tagged with a gantry angle from the linac’s on-board gantry angle encoder. Arc-dynamic QA plans were designed to assessmore » the performance of each individual linac component during VMAT. By analysing each image frame acquired during the QA deliveries the following eight machine performance characteristics were measured as a function of gantry angle: MLC positional accuracy, MLC speed constancy, MLC acceleration constancy, MLC-gantry synchronisation, beam profile constancy, dose rate constancy, gantry speed constancy, dose-gantry angle synchronisation and mechanical sag. All tests were performed on a Varian iX linear accelerator equipped with a 120 leaf Millennium MLC and an aS1000 EPID (Varian Medical Systems, Palo Alto, CA, USA). Results: Machine performance parameters were measured as a function of gantry angle using EPID imaging and compared to machine log files and the treatment plan. Data acquisition is currently underway at 3 centres, incorporating 7 treatment units, at 2 weekly measurement intervals. Conclusion: The proposed system can be applied for streamlined linac QA and commissioning for VMAT. The set of test plans developed can be used to assess the performance of each individual components of the treatment machine during VMAT deliveries as a function of gantry angle. The methodology does not require the setup of any additional phantom or measurement equipment and the analysis is fully automated to allow

  20. Pencil beam characteristics of the next-generation proton scanning gantry of PSI: design issues and initial commissioning results

    NASA Astrophysics Data System (ADS)

    Pedroni, E.; Meer, D.; Bula, C.; Safai, S.; Zenklusen, S.

    2011-07-01

    In this paper we report on the main design features, on the realization process and on selected first results of the initial commissioning of the new Gantry 2 of PSI for the delivery of proton therapy with new advanced pencil beam scanning techniques. We present briefly the characteristics of the new gantry system with main emphasis on the beam optics, on the characterization of the pencil beam used for scanning and on the performance of the scanning system. The idea is to give an overview of the major components of the whole system. The main long-term technical goal of the new equipment of Gantry 2 is to expand the use of pencil beam scanning to the whole spectrum of clinical indications including moving targets. We report here on the initial experience and problems encountered in the development of the system with selected preliminary results of the ongoing commissioning of Gantry 2.

  1. Mortality of captive whooping cranes caused by eastern equine encephalitis virus.

    PubMed

    Dein, F J; Carpenter, J W; Clark, G G; Montali, R J; Crabbs, C L; Tsai, T F; Docherty, D E

    1986-11-01

    Of 39 captive whooping cranes (Grus americana), 7 died during a 7-week period (Sept 17 through Nov 4, 1984) at the Patuxent Wildlife Research Center, Laurel, Md. Before their deaths, 4 cranes did not develop clinical signs, whereas the other 3 cranes were lethargic and ataxic, with high aspartate transaminase, gamma-glutamyl transferase, and lactic acid dehydrogenase activities, and high uric acid concentrations. Necropsies indicated that the birds had ascites, intestinal mucosal discoloration, fat depletion, hepatomegaly, splenomegaly, and visceral gout. Microscopically, extensive necrosis and inflammation were seen in many visceral organs; the CNS was not affected. Eastern equine encephalitis (EEE) virus was isolated from specimens of the livers, kidneys, lungs, brains, and intestines of 4 of the 7 birds that died, and EEE virus-neutralizing antibody was detected in 14 (44%) of the 32 surviving birds. Other infectious or toxic agents were not found. Morbidity or mortality was not detected in 240 sandhill cranes (Grus canadensis) interspersed among the whooping cranes; however, 13 of the 32 sandhill cranes evaluated had EEE virus-neutralizing antibody. Of the 41 wild birds evaluated in the area, 3 (4%) had EEE virus-neutralizing antibody. Immature Culiseta melanura (the most probable mosquito vector) were found in scattered foci 5 km from the research center.

  2. Mortality of captive whooping cranes caused by eastern equine encephalitis virus

    USGS Publications Warehouse

    Dein, F.J.; Carpenter, J.W.; Clark, G.G.; Montali, R.J.; Crabbs, C.L.; Tsai, T.F.; Docherty, D.E.

    1986-01-01

    Of 39 captive whooping cranes (Grus americana), 7 died during a 7-week period (Sept 17 through Nov 4, 1984) at the Patuxent Wildlife Research Center, Laurel, Md. Before their deaths, 4 cranes did not develop clinical signs, whereas the other 3 cranes were lethargic and ataxic, with high aspartate transaminase, gamma-glutamyl transferase, and lactic acid dehydrogenase activities, and high uric acid concentrations. Necropsies indicated that the birds had ascites, intestinal mucosal discoloration, fat depletion, hepatomegaly, splenomegaly, and visceral gout. Microscopically, extensive necrosis and inflammation were seen in many visceral organs; the CNS was not affected. Eastern equine encephalitis (EEE) virus was isolated from specimens of the livers, kidneys, lungs, brains, and intestines of 4 of the 7 birds that died, and EEE virus-neutralizing antibody was detected in 14 (44%) of the 32 surviving birds. Other infectious or toxic agents were not found. Morbidity or mortality was not detected in 240 sandhill cranes (Grus canadensis) interspersed among the whooping cranes; however, 13 of the 32 sandhill cranes evaluated had EEE virus-neutralizing antibody. Of the 41 wild birds evaluated in the area, 3 (4%) had EEE virus-neutralizing antibody. Immature Culiseta melanura (the most probable mosquito vector) were found in scattered foci 5 km from the research center.

  3. Food consumption and retention time in captive whooping cranes (Grus americana)

    USGS Publications Warehouse

    Nelson, J.T.; Gee, G.F.; Slack, R.D.

    1997-01-01

    Food consumption, digesta retention time, and food preference were measured for captive whooping cranes fed pelleted diets. The basal commercial diet was compared to four mixtures containing 70% basal and 30% of one of four important winter foods for the whooping crane: blue crab (Callinectes sapidus), wolfberry fruit (Lycium carolinianurn), live oak acorn (Quercus virginiana), or common Rangia clam (Rangia cuneata). Because captive birds would not eat whole foods, we were prevented from direct food preference tests. Food passed through the gut rapidly, with almost complete elimination within 7 hr. There was some indication that retention time was shorter for the low fiber and high ash and calcium clam diet. Cranes ate less wolfberry feed (g/day) than the other feeds, and all birds ate less wolfberry feed on the day it was first fed, compared to basal diet the previous day. Birds ate more low energy feed than high energy feed. Due to combined effects of low energy content, lower metabolizable energy coefficients, and reduced feed consumption, less energy was assimilated for study diets than basal diet. Apparent shorter retention times for some diets con-taming whooping crane foods may partly explain lower digestibilities and metabolizable energy of winter whooping crane foods compared to commercial crane diet.

  4. 20. GENERAL VIEW OF CONSTRUCTION LOOKING NORTHEAST SHOWING THE CONSTRUCTION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. GENERAL VIEW OF CONSTRUCTION LOOKING NORTHEAST SHOWING THE CONSTRUCTION BRIDGE, GANTRY CRANE AND STRUCTURAL PIERS. - Wilson Dam & Hydroelectric Plant, Spanning Tennessee River at Wilson Dam Road (Route 133), Muscle Shoals, Colbert County, AL

  5. Results of an experiment to lead cranes on migration behind motorized ground vehicles

    USGS Publications Warehouse

    Ellis, D.H.; Clauss, B.; Watanabe, T.; Mykut, R.C.; Kinloch, M.; Ellis, Catherine H.; Urbanek, Richard P.; Stahlecker, Dale W.

    1997-01-01

    Ten greater sandhill cranes (Grus canadensis tabida), trained to enter and ride in a specially equipped truck, were transported at 80? days of age from their rearing site at Patuxent Wildlife Research Center (Patuxent), Maryland, to a reintroduction site located within the species? former breeding range in northern Arizona. After 5 additional weeks of training, these juvenile cranes were led south ca 600 km to a wintering area on the Arizona/Mexico border. Nine of the 10 survived the trek, 495 km of which was flown, although only a few cranes flew every stage of the route. Their longest flight was 77 km. Major problems during the migration were power line collisions (three, one fatal), eagle attacks (none fatal), and overheating (when air temperatures exceeded ca 25?C). All cranes that entered training quickly learned to follow the truck, and their tenacity when following under unfavorable conditions (e.g., poor light, extreme dust, or heat) showed that cranes could consistently be led over long distances. We cannot predict if the cranes will retrace their route unassisted when adults, but 2 cranes returned 130 km to the starting point of the migration after the flock was scattered by an eagle during our migration south. Three other cranes were recovered 55 km from the attack site and on course toward the starting point.

  6. Head-bobbing behavior in foraging Whooping Cranes

    USGS Publications Warehouse

    Cronin, T.; Kinloch, M.; Olsen, Glenn H.

    2006-01-01

    Many species of cursorial birds 'head-bob', that is, they alternately thrust the head forward, then hold it stiII as they walk. Such a motion stabilizes visual fields intermittently and could be critical for visual search; yet the time available for stabilization vs. forward thrust varies with walking speed. Whooping Cranes (Grus americana) are extremely tall birds that visually search the ground for seeds, berries, and small prey. We examined head movements in unrestrained Whooping Cranes using digital video subsequently analyzed with a computer graphical overlay. When foraging, the cranes walk at speeds that allow the head to be held still for at least 50% of the time. This behavior is thought to balance the two needs for covering as much ground as possible and for maximizing the time for visual fixation of the ground in the search for prey. Our results strongly suggest that in cranes, and probably many other bird species, visual fixation of the ground is required for object detection and identification. The thrust phase of the head-bobbing cycle is probably also important for vision. As the head moves forward, the movement generates visual flow and motion parallax, providing visual cues for distances and the relative locations of objects. The eyes commonly change their point of fixation when the head is moving too, suggesting that they remain visually competent throughout the entire cycle of thrust and stabilization.

  7. Sway control method and system for rotary cranes

    DOEpatents

    Robinett, R.D.; Parker, G.G.; Feddema, J.T.; Dohrmann, C.R.; Petterson, B.J.

    1999-06-01

    Methods and apparatuses are disclosed for reducing the oscillatory motion of rotary crane payloads during operator-commanded or computer-controlled maneuvers. An Input-shaping filter receives input signals from multiple operator input devices and converts them into output signals readable by the crane controller to dampen the payload tangential and radial sway associated with rotation of the jib. The input signals are characterized by a hub rotation trajectory [gamma](t), which includes a jib angular acceleration [gamma], a trolley acceleration x, and a load-line length velocity L. The system state variables are characterized by a tangential rotation angle [theta](t) and a radial rotation angle [phi](t) of the load-line. The coupled equations of motion governing the filter are non-linear and configuration-dependent. In one embodiment, a filter is provided between the operator and the crane for filtering undesired frequencies from the angular [gamma] and trolley x velocities to suppress payload oscillation. In another embodiment, crane commands are computer generated and controlled to suppress vibration of the payload using a postulated asymmetrical shape for the acceleration profiles of the jib, which profiles are uniquely determined by a set of parameters (including the acceleration pulse amplitude and the duration and coast time between pulses), or a dynamic programming approach. 25 figs.

  8. Sway control method and system for rotary cranes

    DOEpatents

    Robinett, Rush D.; Parker, Gordon G.; Feddema, John T.; Dohrmann, Clark R.; Petterson, Ben J.

    1999-01-01

    Methods and apparatuses for reducing the oscillatory motion of rotary crane payloads during operator-commanded or computer-controlled maneuvers. An Input-shaping filter receives input signals from multiple operator input devices and converts them into output signals readable by the crane controller to dampen the payload tangential and radial sway associated with rotation of the jib. The input signals are characterized by a hub rotation trajectory .gamma.(t), which includes a jib angular acceleration .gamma., a trolley acceleration x, and a load-line length velocity L. The system state variables are characterized by a tangential rotation angle .theta.(t) and a radial rotation angle .phi.(t) of the load-line. The coupled equations of motion governing the filter are non-linear and configuration-dependent. In one embodiment, a filter is provided between the operator and the crane for filtering undesired frequencies from the angular .gamma. and trolley x velocities to suppress payload oscillation. In another embodiment, crane commands are computer generated and controlled to suppress vibration of the payload using a postulated asymmetrical shape for the acceleration profiles of the jib, which profiles are uniquely determined by a set of parameters (including the acceleration pulse amplitude and the duration and coast time between pulses), or a dynamic programming approach.

  9. Comparison of Serum Protein Electrophoresis Values in Wild and Captive Whooping Cranes ( Grus americana ).

    PubMed

    Hausmann, Jennifer C; Cray, Carolyn; Hartup, Barry K

    2015-09-01

    Protein electrophoresis of serum samples from endangered, wild whooping cranes ( Grus americana ) was performed to help assess the health of the only self-sustaining, migratory population in North America. Serum samples from wild adult cranes (n = 22) were taken at Aransas National Wildlife Refuge, Texas, USA during winter. Wild juvenile cranes (n = 26) were sampled at Wood Buffalo National Park, Northwest Territories, Canada, in midsummer. All captive crane samples were acquired from the International Crane Foundation, Baraboo, WI, USA. Captive adult cranes (n = 30) were sampled during annual examinations, and archived serum samples from captive juvenile cranes (n = 19) were selected to match the estimated age of wild juveniles. Wild juveniles had significantly lower concentrations of all protein fractions than wild adults, except for prealbumin and γ globulins. All protein fraction concentrations for wild juveniles were significantly lower compared with captive juveniles, except for prealbumin and γ globulins, which were higher. Wild adults had significantly greater γ globulin concentrations than captive adults. Captive juveniles had significantly lower prealbumin and albumin concentrations and albumin : globulin ratios than captive adults. The higher γ globulin concentrations in wild versus captive cranes are likely because of increased antigenic exposure and immune stimulation. Protein fraction concentrations vary significantly with age and natural history in this species. Reference intervals for serum protein electrophoresis results from captive adult whooping cranes are provided in this study.

  10. Population recovery of the Whooping Crane with emphasis on reintroduction efforts: Past and future

    USGS Publications Warehouse

    Ellis, D.H.; Lewis, J.C.; Gee, G.F.; Smith, D.G.

    1992-01-01

    The U.S. Fish and Wildlife Service (USFWS) began building a captive whooping crane (Grus americana) colony at Patuxent Wildlife Research Center (Patuxent), Maryland, in 1966. From 1976 to 1984, 73 eggs from this colony and 216 eggs from Wood Buffalo National Park (Wood Buffalo), Canada, nests were placed in sandhill crane (G. canadensis) nests at Grays Lake National Wildlife Refuge (Grays Lake), Idaho, the site of the first whooping crane reintroduction attempt. Although 84 chicks fledged from the 289 eggs, the egg transfer program has been discontinued because of inordinately high mortality (only ca. 13 birds remain in the wild in 1991) and lack of breeding in survivors. In recent decades new methods have emerged for introducing captive-produced offspring to the wild. Surrogate studies with sandhill cranes, particularly the endangered Mississippi sandhill cranes (G. c. pulla), have shown that young cranes, raised either by captive, conspecific foster parents, or by costumed humans and in close association with live cranes and lifelike crane taxidermic dummies, have high post-release survival rates. These techniques will likely be used in future whooping crane reintroduction programs. Current recovery objectives for the whooping crane include expansion of the 2 captive colonies, establishment of a third captive colony in Canada, and reintroduction of 2 additional wild populations. The Kissimmee Prairie in central Florida has been selected for the next release experiment. Evaluation of this site began in 1984, and risk assessment is expected to begin in 1992 with the transfer and monitoring of a group of captive-reared, juvenile whooping cranes. These 'tests of the environment' will, if results are favorable, be followed by a full-scale reintroduction effort of at least 20 birds/year beginning in 1994 or 1995.

  11. Parental development of eimerian coccidia in sandhill and whooping cranes

    USGS Publications Warehouse

    Novilla, M.N.; Carpenter, J.W.; Spraker, T.R.; Jeffers, T.K.

    1981-01-01

    In contrast with isosporoid species of coccidia that have established extraintestinal phases of development, the eimeriids, except for a few species, generally have been considered inhabitants of the intestinal tract. Eimeria infection in sandhill cranes (Grus canadensis) and whooping cranes (G. americana) may result in disseminated visceral coccidiosis. Nodules were observed in the oral cavity of 33% (n = 95) of the G. canadensis at the Patuxent Wildlife Research Center (PWRC) in Laurel, MD. Necropsy of six of the afflicted cranes revealed granulomatous nodules in many tissues and organs. Histologic studies disclosed protozoan organisms morphologically resembling schizonts in the granulomas, and endogenous stages of coccidia were present in the intestines of four birds. Fecalysis of three of four sandhill cranes yielded oocysts of E. reichenowi and E. gruis. Only E. reichenowi-type oocysts were recovered from a dead whooping crane sample. Domestic broiler chicks each intubated with about 1 times 106 pooled sporulated oocysts of E. reichenowi and E. gruis were not infected. Exposure of six incubator-hatched and hand-reared sandhill crane chicks to oocysts artificially (two chicks) and naturally (four chicks) resulted in typical infection of intestinal epithelium with invasion of subepithelial tissues extending to the muscular layer and widespread extraintestinal development. Asexual and sexual stages occurred primarily in macrophages in the liver, spleen, heart, and lung. In the lung, oocysts were found in bronchial exudate and epithelial lining cells. Six of ten G. canadensis chicks, one adult G. americana, and three of five G. americana chicks that died naturally at PWRC had disseminated visceral coccidiosis.

  12. Serum corticosterone response to adrenocorticotropic hormone stimulation in Florida sandhill cranes.

    PubMed

    Ludders, J W; Langenberg, J A; Czekala, N M; Erb, H N; McCormick, H

    1998-10-01

    Florida sandhill cranes (Grus canadensis pratensis) were conditioned to confinement in an enclosure for 7 days, 6 hr a day. On day 8, cranes were catheterized and then confined in an enclosure. Venous blood (2 ml) was collected through the catheter and an attached IV line immediately before (-60 min) and 60 min after (0 min) confinement. Using a randomization table and a restricted cross-over experimental design, cranes were injected intravenously with either saline (control) or adrenocorticotropic hormone (ACTH; cosyntropin, Cortrosyn; 0.25 mg). At 30, 60, 120, 180, 240 and 300 min after injection, blood samples were collected and assayed for corticosterone. The cranes receiving ACTH increased their serum corticosterone concentrations as much as fivefold above baseline concentrations. Serum corticosterone concentrations remained significantly elevated for approximately 60 min after ACTH stimulation. Physical restraint and catheterization caused an increase in serum corticosterone almost comparable to that induced by ACTH stimulation. In cranes injected with saline, serum corticosterone decreased within 1 hr after physical restraint and catheterization, and remained at lower levels throughout the remaining 5 hr of confinement.

  13. Large Crawler Crane for new lightning protection system

    NASA Image and Video Library

    2007-10-25

    A large crawler crane arrives at the turn basin at the Launch Complex 39 Area on NASA's Kennedy Space Center. The crane with its 70-foot boom will be moved to Launch Pad 39B and used to construct a new lightning protection system for the Constellation Program and Ares/Orion launches. Pad B will be the site of the first Ares vehicle launch, including Ares I-X which is scheduled for April 2009.

  14. 29 CFR 1926.1437 - Floating cranes/derricks and land cranes/derricks on barges.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... (1) An anti two-block device is required only when hoisting personnel or hoisting over an occupied... secured. (iv) The vessel/flotation device is watertight based on the condition of the chain lockers..., strapping the crane/derrick to the vessel/flotation device with chains, or other methods of physical...

  15. 29 CFR 1926.1437 - Floating cranes/derricks and land cranes/derricks on barges.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... (1) An anti two-block device is required only when hoisting personnel or hoisting over an occupied... secured. (iv) The vessel/flotation device is watertight based on the condition of the chain lockers..., strapping the crane/derrick to the vessel/flotation device with chains, or other methods of physical...

  16. 29 CFR 1926.1437 - Floating cranes/derricks and land cranes/derricks on barges.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... (1) An anti two-block device is required only when hoisting personnel or hoisting over an occupied... secured. (iv) The vessel/flotation device is watertight based on the condition of the chain lockers..., strapping the crane/derrick to the vessel/flotation device with chains, or other methods of physical...

  17. 29 CFR 1926.1437 - Floating cranes/derricks and land cranes/derricks on barges.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... (1) An anti two-block device is required only when hoisting personnel or hoisting over an occupied... secured. (iv) The vessel/flotation device is watertight based on the condition of the chain lockers..., strapping the crane/derrick to the vessel/flotation device with chains, or other methods of physical...

  18. Wintering Sandhill Crane exposure to wind energy development in the central and southern Great Plains, USA

    USGS Publications Warehouse

    Pearse, Aaron T.; Brandt, David; Krapu, Gary

    2016-01-01

    Numerous wind energy projects have been constructed in the central and southern Great Plains, USA, the main wintering area for midcontinental Sandhill Cranes (Grus canadensis). In an initial assessment of the potential risks of wind towers to cranes, we estimated spatial overlap, investigated potential avoidance behavior, and determined the habitat associations of cranes. We used data from cranes marked with platform transmitting terminals (PTTs) with and without global positioning system (GPS) capabilities. We estimated the wintering distributions of PTT-marked cranes prior to the construction of wind towers, which we compared with current tower locations. Based on this analysis, we found 7% spatial overlap between the distributions of cranes and towers. When we looked at individually marked cranes, we found that 52% would have occurred within 10 km of a tower at some point during winter. Using data from cranes marked after tower construction, we found a potential indication of avoidance behavior, whereby GPS-marked cranes generally used areas slightly more distant from existing wind towers than would be expected by chance. Results from a habitat selection model suggested that distances between crane locations and towers may have been driven more by habitat selection than by avoidance, as most wind towers were constructed in locations not often selected by wintering cranes. Our findings of modest regional overlap and that few towers have been placed in preferred crane habitat suggest that the current distribution of wind towers may be of low risk to the continued persistence of wintering midcontinental Sandhill Cranes in the central and southern Great Plains.

  19. VIEW OF CRANE LOADING AND UNLOADING AREA OF FUEL STORAGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF CRANE LOADING AND UNLOADING AREA OF FUEL STORAGE BUILDING (CPP-603). PHOTO TAKEN LOOKING NORTH. INL PHOTO NUMBER HD-54-17-4. Mike Crane, Photographer, 8/2005 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  20. VIEW OF CRANE LOADING AND UNLOADING AREA OF FUEL STORAGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF CRANE LOADING AND UNLOADING AREA OF FUEL STORAGE BUILDING (CPP-603). PHOTO TAKEN LOOKING SOUTH. INL PHOTO NUMBER HD-54-17-1. Mike Crane, Photographer, 8/2005 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  1. STOCK YARD LOOKING SOUTHEAST SHOWING OVERHEAD YARD CRANE RAIL, THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STOCK YARD LOOKING SOUTHEAST SHOWING OVERHEAD YARD CRANE RAIL, THE MALLEABLE CUPOLAS AND EMISSION RECOVERY SYSTEM, OLD SHED ROOF THAT COVERED THE EARLIER MALLEABLE CUPOLA CHARGING CRANE, MALLEABLE FOUNDRY, AND POLLUTION CONTROL BAGHOUSE. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  2. COMPUTED TOMOGRAPHIC ANATOMY AND CHARACTERISTICS OF RESPIRATORY ASPERGILLOSIS IN JUVENILE WHOOPING CRANES.

    PubMed

    Schwarz, Tobias; Kelley, Cristin; Pinkerton, Marie E; Hartup, Barry K

    2016-01-01

    Respiratory diseases are a leading cause of morbidity and mortality in captivity reared, endangered whooping cranes (Grus americana). Objectives of this retrospective, case series, cross-sectional study were to describe computed tomography (CT) respiratory anatomy in a juvenile whooping crane without respiratory disease, compare CT characteristics with gross pathologic characteristics in a group of juvenile whooping cranes with respiratory aspergillosis, and test associations between the number of CT tracheal bends and bird sex and age. A total of 10 juvenile whooping cranes (one control, nine affected) were included. Seven affected cranes had CT characteristics of unilateral extrapulmonary bronchial occlusion or wall thickening, and seven cranes had luminal occlusion of the intrapulmonary primary or secondary bronchi. Air sac membrane thickening was observed in three cranes in the cranial and caudal thoracic air sacs, and air sac diverticulum opacification was observed in four cranes. Necropsy lesions consisted of severe, subacute to chronic, focally extensive granulomatous pathology of the trachea, primary bronchi, lungs, or air sacs. No false positive CT scan results were documented. Seven instances of false negative CT scan results occurred; six of these consisted of subtle, mild air sacculitis including membrane opacification or thickening, or the presence of small plaques found at necropsy. The number of CT tracheal bends was associated with bird age but not sex. Findings supported the use of CT as a diagnostic test for avian species with respiratory disease and tracheal coiling or elongated tracheae where endoscopic evaluation is impractical. © 2015 The Authors. Veterinary Radiology & Ultrasound published by Wiley Periodicals, Inc. on behalf of American College of Veterinary Radiology.

  3. 75 FR 68429 - Cranes and Derricks in Construction; Approval of Information Collection Requirements

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-08

    .... OSHA-2007-0066] RIN 1218-AC01 Cranes and Derricks in Construction; Approval of Information Collection... requirements. SUMMARY: On August 9, 2010, OSHA published a final rule revising the Cranes and Derricks Standard... necessary to protect employees during the use of cranes and derricks in construction. That final standard...

  4. Migration patterns and movements of sandhill cranes wintering in central and southwestern Louisiana

    USGS Publications Warehouse

    King, Sammy L.; Pierce, Aaron R.; Hersey, Kent R.; Winstead, Nicholas; Hartup, Barry K.

    2010-01-01

    In this study we trapped wintering sandhill cranes (Grus canadensis) in Louisiana and fitted them with satellite transmitters to determine their migration routes. Four of the 6 sandhill cranes with validated locations and a terminus point used the Central Flyway for spring migration; 2 of these 4 (the only 2 for which we have data) also used the Central Flyway for fall migration. Two of the 6 birds used the Mississippi Flyway for spring migration. The results of this study suggest that reintroduced whooping cranes (G. americana) that intermix and migrate with sandhill cranes that winter in Louisiana may enter the Central Flyway. In addition, the Mississippi Flyway is a viable option to use as a migration route for whooping cranes if they are reintroduced in Louisiana.

  5. Design and implementation of the ESL compact range underhung bridge crane

    NASA Technical Reports Server (NTRS)

    Shamansky, H. T.; Dominek, A. K.; Burnside, W. D.

    1987-01-01

    As the indoor compact range technology has continued to increase, the need to handle larger and heavier targets has also increased. This need for target lifting and handling prompted the feasibility study of the use of an underhung bridge crane to be installed in the ESL (ElectroScience Laboratory, Ohio State University) compact range. This report documents both the design of the underhung bridge crane that was installed and the implementation of the design in the actual installation of the crane.

  6. Decision analysis for conservation breeding: Maximizing production for reintroduction of whooping cranes

    USGS Publications Warehouse

    Smith, Des H.V.; Converse, Sarah J.; Gibson, Keith; Moehrenschlager, Axel; Link, William A.; Olsen, Glenn H.; Maguire, Kelly

    2011-01-01

    Captive breeding is key to management of severely endangered species, but maximizing captive production can be challenging because of poor knowledge of species breeding biology and the complexity of evaluating different management options. In the face of uncertainty and complexity, decision-analytic approaches can be used to identify optimal management options for maximizing captive production. Building decision-analytic models requires iterations of model conception, data analysis, model building and evaluation, identification of remaining uncertainty, further research and monitoring to reduce uncertainty, and integration of new data into the model. We initiated such a process to maximize captive production of the whooping crane (Grus americana), the world's most endangered crane, which is managed through captive breeding and reintroduction. We collected 15 years of captive breeding data from 3 institutions and used Bayesian analysis and model selection to identify predictors of whooping crane hatching success. The strongest predictor, and that with clear management relevance, was incubation environment. The incubation period of whooping crane eggs is split across two environments: crane nests and artificial incubators. Although artificial incubators are useful for allowing breeding pairs to produce multiple clutches, our results indicate that crane incubation is most effective at promoting hatching success. Hatching probability increased the longer an egg spent in a crane nest, from 40% hatching probability for eggs receiving 1 day of crane incubation to 95% for those receiving 30 days (time incubated in each environment varied independently of total incubation period). Because birds will lay fewer eggs when they are incubating longer, a tradeoff exists between the number of clutches produced and egg hatching probability. We developed a decision-analytic model that estimated 16 to be the optimal number of days of crane incubation needed to maximize the number of

  7. Pathogenicity of West Nile virus and response to vaccination in sandhill cranes (Grus canadensis) using a killed vaccine.

    PubMed

    Olsen, Glenn H; Miller, Kimberli J; Docherty, Douglas E; Bochsler, Valerie S; Sileo, Louis

    2009-06-01

    West Nile virus was introduced into the United States in the vicinity of New York, New York, USA in 1999. The virus has since killed large numbers of birds nationwide, especially, but not limited to, crows (Corvus brachyrhinchos). One sandhill crane (Grus canadensis) at the Bridgeport Zoo (Bridgeport, Connecticut, USA) reportedly died from West Nile virus, so sandhill cranes and endangered whooping cranes (Grus americana), both in the wild and in captive breeding colonies at United States Geological Service (USGS) Patuxent Wildlife Research Center (Laurel, Maryland, USA) were considered at risk. A killed vaccine in sandhill cranes was evaluated by vaccinating and then challenging these cranes with live West Nile virus. No sandhill cranes inoculated with the killed vaccine developed significant titers when compared with unvaccinated controls. No sandhill cranes inoculated with the vaccine and challenged with the virus died from West Nile virus infection. In addition, no unvaccinated challenged sandhill cranes died. However, 2 days postchallenge, vaccinated cranes had significantly less viremia (P < 0.05) than unvaccinated cranes. Seven days postchallenge vaccinated cranes had significantly less cloacal shedding of the virus (P < 0.05) than unvaccinated cranes and significantly less weight loss (P < 0.05) as compared with unvaccinated cranes. Vaccinated sandhill cranes developed significantly higher titers 14 days postchallenge and were viremic for shorter periods of time after challenge than unvaccinated individuals. Unvaccinated challenged cranes had glial cell aggregates in both the brain and brain stem areas, and this was not observed in vaccinated challenged cranes or in vaccinated unchallenged cranes.

  8. Pathogenicity of West Nile virus and response to vaccination in sandhill cranes (Grus canadensis) using a killed vaccine

    USGS Publications Warehouse

    Olsen, Glenn H.; Miller, Kimberli J.; Docherty, Douglas E.; Shearn-Bochsler, Valerie I.; Sileo, Louis

    2009-01-01

    West Nile virus was introduced into the United States in the vicinity of New York, New York, USA in 1999. The virus has since killed large numbers of birds nationwide, especially, but not limited to, crows (Corvus brachyrhinchos). One sandhill crane (Grus canadensis) at the Bridgeport Zoo (Bridgeport, Connecticut, USA) reportedly died from West Nile virus, so sandhill cranes and endangered whooping cranes (Grus americana), both in the wild and in captive breeding colonies at United States Geological Service (USGS) Patuxent Wildlife Research Center (Laurel, Maryland, USA) were considered at risk. A killed vaccine in sandhill cranes was evaluated by vaccinating and then challenging these cranes with live West Nile virus. No sandhill cranes inoculated with the killed vaccine developed significant titers when compared with unvaccinated controls. No sandhill cranes inoculated with the vaccine and challenged with the virus died from West Nile virus infection. In addition, no unvaccinated challenged sandhill cranes died. However, 2 days postchallenge, vaccinated cranes had significantly less viremia (P < 0.05) than unvaccinated cranes. Seven days postchallenge vaccinated cranes had significantly less cloacal shedding of the virus (P < 0.05) than unvaccinated cranes and significantly less weight loss (P < 0.05) as compared with unvaccinated cranes. Vaccinated sandhill cranes developed significantly higher titers 14 days postchallenge and were viremic for shorter periods of time after challenge than unvaccinated individuals. Unvaccinated challenged cranes had glial cell aggregates in both the brain and brain stem areas, and this was not observed in vaccinated challenged cranes or in vaccinated unchallenged cranes.

  9. 22. V2 GANTRY, LAUNCH COMPLEX 33: GENERAL VIEW, LOOKING WEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. V-2 GANTRY, LAUNCH COMPLEX 33: GENERAL VIEW, LOOKING WEST AND UPWARD FROM APRON OF BLAST PIT, 20,000 POUND MOTOR TEST AND LAUNCH FACILITY - White Sands Missile Range, V-2 Rocket Facilities, Near Headquarters Area, White Sands, Dona Ana County, NM

  10. Conflicts between sandhill cranes and farmers in the western United States: evolving issues and solutions

    USGS Publications Warehouse

    Austin, Jane E.

    2012-01-01

    The main conflicts between Sandhill Cranes (Grus canadensis) and farmers in western United States occur in the Rocky Mountain region during migration and wintering periods. Most crop damage by cranes occurs in mature wheat (Triticum aestivum) and barley (Hordeum vulgare), young shoots of alfalfa (Medicago sativa) and cereal grains, chilies (Capsicum annuum), and silage corn (Zea mays). Damage is related to proximity of crop fields to roost sites and timing of crane concentrations relative to crop maturity or vulnerability. The evolution of conflicts between farmers and cranes and current solutions are described for two areas of the Rocky Mountains used by staging, migrating, or wintering cranes: Grays Lake, Idaho, and the Middle Rio Grande Valley, New Mexico. In both areas, conflicts with growing crane populations were aggravated by losses of wetlands and cropland, proximity of crops to roosts and other wetland areas, changing crop types and practices, and increasing urbanization. At Grays Lake, fall-staging cranes damaged barley fields near an important breeding refuge as well as fields 15-50 km away. In the Middle Rio Grande Valley, migrating and wintering cranes damaged young alfalfa fields, chilies, and silage corn. Solutions in both areas have been addressed through cooperative efforts among federal and state agencies, that manage wetlands and croplands to increase food availability and carrying capacity on public lands, provide hazing programs for private landowners, and strategically target crane hunting to problem areas. Sustaining the success of these programs will be challenging. Areas important to Sandhill Cranes in the western United Sates experience continued loss of habitat and food resources due to urbanization, changes in agricultural crops and practices, and water-use conflicts, which threaten the abilities of both public and private landowners to manage wetlands and croplands for cranes. Conservation of habitats and water resources are important

  11. Massport Air Emission Reduction Efforts and Community Enhancement Projects

    EPA Pesticide Factsheets

    This page describes efforts at Massport to reduce their emissions, including their Clean Truck Replacement program at Conley Terminal, their rubber tire gantry crane repower, idle and truck trip reductions, park creation, and dedicated freight corridor.

  12. Large Crawler Crane for new lightning protection system

    NASA Image and Video Library

    2007-10-25

    A large crawler crane begins moving away from the turn basin at the Launch Complex 39 Area on NASA's Kennedy Space Center. The crane with its 70-foot boom will be moved to Launch Pad 39B and used to construct a new lightning protection system for the Constellation Program and Ares/Orion launches. Pad B will be the site of the first Ares vehicle launch, including Ares I-X which is scheduled for April 2009.

  13. Agricultural producers' perceptions of sandhill cranes in the San Luis Valley of Colorado

    USGS Publications Warehouse

    Laubhan, M.K.; Gammonley, J.H.

    2001-01-01

    Management for migratory birds at an ecosystem scale requires forming cooperative partnerships with the private sector. To be effective, however, wildlife managers must understand the economic and social attitudes of private landowners to ensure that strategies involving stakeholders are viable and can be implemented. We documented attitudes of farmers in the San Luis Valley (SLV) of Colorado toward Rocky Mountain Population greater sandhill cranes (Grus canadensis tabida) using a self administered, mail-back survey. Overall response rate was 46.7%. Viewing sandhill cranes in the SLV was considered somewhat important or important by 78.6% of respondents. In contrast, only 62.1% of respondents indicated that viewing sandhill cranes was somewhat important or important on their own land. Farmers' attitudes toward viewing sandhill cranes on their own property were related (P=0.02) to perceived conflicts with crop production. The extent of crane use (P=0.04) was the only variable we tested that predicted whether conflicts were reported. Our results suggest that partnerships between farmers and natural resource agencies concerned with management of sandhill cranes may be viable. However, the role of farmers in any proposed management strategy must be examined carefully because there may be an upper limit of crane use on private land that farmers will tolerate.

  14. Changes in agriculture and abundance of snow geese affect carrying capacity of sandhill cranes in Nebraska

    USGS Publications Warehouse

    Pearse, A.T.; Krapu, G.L.; Brandt, D.A.; Kinzel, P.J.

    2010-01-01

    The central Platte River valley (CPRV) in Nebraska, USA, is a key spring-staging area for approximately 80 of the midcontinent population of sandhill cranes (Grus canadensis; hereafter cranes). Evidence that staging cranes acquired less lipid reserves during the 1990s compared to the late 1970s and increases in use of the CPRV by snow geese (Chen caerulescens) prompted us to investigate availability of waste corn and quantify spatial and temporal patterns of crane and waterfowl use of the region. We developed a predictive model to assess impacts of changes in availability of corn and snow goose abundance under past, present, and potential future conditions. Over a hypothetical 60-day staging period, predicted energy demand of cranes and waterfowl increased 87 between the late 1970s and 19982007, primarily because peak abundances of snow geese increased by 650,000 and cranes by 110,000. Compared to spring 1979, corn available when cranes arrived was 20 less in 1998 and 68 less in 1999; consequently, the area of cornfields required to meet crane needs increased from 14,464 ha in 1979 to 32,751 ha in 1998 and 90,559 ha in 1999. Using a pooled estimate of 88 kg/ha from springs 19981999 and 20052007, the area of cornfields needed to supply food requirements of cranes and waterfowl increased to 65,587 ha and was greatest in the eastern region of the CPRV, where an estimated 54 of cranes, 47 of Canada geese (Branta canadensis), 45 of greater white-fronted geese (Anser albifrons), and 46 of snow geese occurred during ground surveys. We estimated that a future reduction of 25 in available corn or cornfields would increase daily foraging flight distances of cranes by 2738. Crane use and ability of cranes to store lipid reserves in the CPRV could be reduced substantially if flight distance required to locate adequate corn exceeded a physiological maximum distance cranes could fly in search of food. Options to increase carrying capacity for cranes include increasing

  15. Dynamic loads during failure risk assessment of bridge crane structures

    NASA Astrophysics Data System (ADS)

    Gorynin, A. D.; Antsev, V. Yu; Shaforost, A. N.

    2018-03-01

    The paper presents the method of failure risk assessment associated with a bridge crane metal structure at the design stage. It also justifies the necessity of taking into account dynamic loads with regard to the operational cycle of a bridge crane during failure risk assessment of its metal structure.

  16. The National Shipbuilding Research Program, 1990 Ship Production Symposium

    DTIC Science & Technology

    1990-08-01

    deck, sides and bottom Shear stresses which may be important for certain classes of vessels, are not accounted for in this study. The net sectional...and the superstructure. The highly pre-outfitted blocks then can be transferred to the dry dock by a gantry crane . After integrating the blocks into...manager. 2A-2-3 Examples of cost centres are: Plate Production Unit Pre-outfitting Hull Construction Ship Outfitting (Weapons Compartments) Berth Cranes

  17. View of main hoist wire rope drum and brakes, open ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of main hoist wire rope drum and brakes, open contact boards are in view at the far right wall - Puget Sound Naval Shipyard, Portal Gantry Crane No. 42, Pier 5, Farragut Avenue, Bremerton, Kitsap County, WA

  18. PERSPECTIVE VIEW LOOKING SOUTHEAST OF THE SATURN I TEST. NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PERSPECTIVE VIEW LOOKING SOUTHEAST OF THE SATURN I TEST. NOTE THE GANTRY CRANE USED TO MANEUVER ROCKETS INTO THE TEST STAND. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  19. 12. FLOOR 2; STONE CRANE IN PLACE FOR ROCK STONES; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. FLOOR 2; STONE CRANE IN PLACE FOR ROCK STONES; STONE CRANE HAS OAK SPAR, JIB AND BRACE, METAL SCREW, IRON YOKE AND DOGS; IRON PINS FIT THROUGH HOLES IN DOGS INTO HOLES DRILLED IN RUNNER STONE - Hook Windmill, North Main Street at Pantigo Road, East Hampton, Suffolk County, NY

  20. Coyote and the Crane--A Legend of the Yakimas.

    ERIC Educational Resources Information Center

    George, Larry

    Written in plain terms, printed in large type, and accompanied by illustrations, this legend of the Yakima Indians tells of how the crane came to be; it is the story of how Coyote turns a man into a crane because the man would not share his catch of fish. "In the old days people shared things. It was our way of life. If a person was hungry…

  1. Effects of extended photoperiod on sandhill crane reproduction

    USGS Publications Warehouse

    Gee, G.F.; Pendleton, G.W.; Wood, Don A.

    1992-01-01

    Photoperiod studies were conducted with greater sandhill cranes (Grus canadensis tabida) from 1969 to 1972 and from 1982 to 1987 at the Patuxent Wildlife Research Center, Maryland. When housed indoors and exposed to long photoperiods, males produced semen during winter. When exposed to artificially extended photoperiods during spring in outdoor pens, females apparently laid earlier in the year and laid more eggs than they would have without the added light. Cranes did not exhibit any signs of photorefractory response to extended photoperiods.

  2. Load reduction test method of similarity theory and BP neural networks of large cranes

    NASA Astrophysics Data System (ADS)

    Yang, Ruigang; Duan, Zhibin; Lu, Yi; Wang, Lei; Xu, Gening

    2016-01-01

    Static load tests are an important means of supervising and detecting a crane's lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes.

  3. Geographic distribution of the mid-continent population of sandhill cranes and related management applications

    USGS Publications Warehouse

    Krapu, Gary L.; Brandt, David A.; Jones, Kenneth L.; Johnson, Douglas H.

    2011-01-01

    The Mid-continent Population (MCP) of sandhill cranes (Grus canadensis) is widely hunted in North America and is separated into the Gulf Coast Subpopulation and Western Subpopulation for management purposes. Effective harvest management of the MCP requires detailed knowledge of breeding distribution of subspecies and subpopulations, chronology of their use of fall staging areas and wintering grounds, and exposure to and harvest from hunting. To address these information needs, we tagged 153 sandhill cranes with Platform Transmitting Terminals (PTTs) during 22 February–12 April 1998–2003 in the Central and North Platte River valleys of south-central Nebraska. We monitored PTT-tagged sandhill cranes, hereafter tagged cranes, from their arrival to departure from breeding grounds, during their fall migration, and throughout winter using the Argos satellite tracking system. The tracking effort yielded 74,041 useable locations over 49,350 tag days; median duration of tracking of individual cranes was 352 days and 73 cranes were tracked >12 months. Genetic sequencing of mitochondrial DNA (mtDNA) from blood samples taken from each of our random sample of tagged cranes indicated 64% were G. c. canadensis and 34% were Grus canadensis tabida. Tagged cranes during the breeding season settled in northern temperate, subarctic, and arctic North America (U.S. [23%, n = 35], Canada [57%, n = 87]) and arctic regions of northeast Asia (Russia [20%, n = 31]). Distribution of tagged cranes by breeding affiliation was as follows: Western Alaska–Siberia (WA–S, 42 ± 4% [SE]), northern Canada–Nunavut (NC–N, 21 ± 4%), west-central Canada–Alaska (WC–A, 23 ± 4%) and East-central Canada–Minnesota (EC–M, 14 ± 3%). All tagged cranes returned to the same breeding affiliation used during the previous year with a median distance of 1.60 km (range: 0.08–7.7 km, n = 53) separating sites used in year 1 and year 2. Fall staging occurred

  4. Features and perspectives of automatized construction crane-manipulators

    NASA Astrophysics Data System (ADS)

    Stepanov, Mikhail A.; Ilukhin, Peter A.

    2018-03-01

    Modern construction industry still has a high percentage of manual labor, and the greatest prospects of improving the construction process are lying in the field of automatization. In this article automatized construction manipulator-cranes are being studied in order to achieve the most rational design scheme. This is done through formulating a list of general conditions necessary for such cranes and a set of specialized kinematical conditions. A variety of kinematical schemes is evaluated via these conditions, and some are taken for further dynamical analisys. The comparative dynamical analisys of taken schemes was made and the most rational scheme was defined. Therefore a basis for a more complex and practical research of manipulator-cranes design is given and ways to implement them on practical level can now be calculated properly. Also, the perspectives of implementation of automated control systems and informational networks on construction sites in order to boost the quality of construction works, safety of labour and ecological safety are shown.

  5. 75 FR 56487 - Airworthiness Directives; Erickson Air-Crane Incorporated Model S-64F Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-16

    ...-0909; Directorate Identifier 2010-SW-026-AD] RIN 2120-AA64 Airworthiness Directives; Erickson Air-Crane... rulemaking (NPRM). SUMMARY: This document proposes adopting a new airworthiness directive (AD) for Erickson Air-Crane Incorporated (Erickson Air-Crane) Model S- 64F helicopters. The AD would require, at...

  6. 76 FR 75450 - Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-02

    ...-AA00 Safety Zone; Container Crane Relocation, Cooper and Wando Rivers, Charleston, SC AGENCY: Coast... moving safety zone around a barge transporting two container cranes on the Cooper and Wando Rivers during... from hazards associated with transporting the large cranes by barge. Persons and vessels are prohibited...

  7. Antibody response of sandhill and whooping cranes to an eastern equine encephalitis virus vaccine

    USGS Publications Warehouse

    Clark, G.G.; Dein, F.J.; Crabbs, C.L.; Carpenter, J.W.; Watts, D.M.

    1987-01-01

    As a possible strategy to protect whooping cranes (Grus americana) from fatal eastern equine encephalitis (EEE) viral infection, studies were conducted to determine the immune response of this species and sandhill cranes (Grus canadensis) to a formalin-inactivated EEE viral vaccine. Viral-specific neutralizing antibody was elicited in both species after intramuscular (IM) vaccination. Subcutaneous and intravenous routes of vaccination failed to elicit detectable antibody in sandhill cranes. Among the IM vaccinated cranes, the immune response was characterized by nondetectable or low antibody titers that waned rapidly following primary exposure to the vaccine. However, one or more booster doses consistently elicited detectable antibody and/or increased antibody titers in the whooping cranes. In contrast, cranes with pre-existing EEE viral antibody, apparently induced by natural infection, exhibited a rapid increase and sustained high-antibody titers. Even though EEE virus vaccine induced neutralizing antibody and produced no adverse side effects, further studies will be required to determine the protective efficacy of the antibody.

  8. SU-G-BRB-09: Kompeito-Shot: Development of a Novel Verification System for 3D Beam Alignment Including the Sag of Gantry Head

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tsuneda, M; Nishio, T; Saito, A

    Purpose: High accuracy of beam axis is required for high-precision radiation therapy. It is impossible to quantitatively and directly evaluate the sagging effect of the gantry head using current methods (star-shot and Winston-Lutz tests) when the gantry head sags under the weight of MLC and X-Y jaws. We introduce a novel method “Kompeito-shot (3D star-shot)” for the verification of 3D beam alignment (3D isocentricity). This method enables direct measurement of the sagging effect. We developed the system and examined the concept of this system. Methods: The system composed of a plastic scintillator (PS), a truncated cone-shaped mirror, a plane mirrormore » and a CCD camera. Two types of PS were compared. One consisted of a column PS (Co system), the other consisted of a column PS inserted into a barrel PS with shading film in between (Co-Ba system). The system was irradiated with a 6-MV photon beam and the scintillation light was measured using the CCD camera through the mirror system. The gantry angle was set from 270 to 300 degrees to mimic the sagging of the gantry head for evaluating the accuracy of the system. The distance between a center of PS and entrance / exit points were calculated to analyze the gantry angle. And, the calculated gantry angle and the irradiated gantry angle were compared. Results: We compared the measured image of Co system and that of Co-Ba system. Entrance and exit areas were visualized clearly. The histogram showing the difference between the calculated gantry angle and the irradiated gantry angle was fitted with a Gaussian function. Mean and standard deviation of Co-Ba system were smaller than that of Co system by one order of magnitude. Conclusion: We developed the Kompeito-shot system and evaluated the accuracy of the system. The basic concept works for the verification of 3D isocentricity.« less

  9. High precision tracking control of a servo gantry with dynamic friction compensation.

    PubMed

    Zhang, Yangming; Yan, Peng; Zhang, Zhen

    2016-05-01

    This paper is concerned with the tracking control problem of a voice coil motor (VCM) actuated servo gantry system. By utilizing an adaptive control technique combined with a sliding mode approach, an adaptive sliding mode control (ASMC) law with friction compensation scheme is proposed in presence of both frictions and external disturbances. Based on the LuGre dynamic friction model, a dual-observer structure is used to estimate the unmeasurable friction state, and an adaptive control law is synthesized to effectively handle the unknown friction model parameters as well as the bound of the disturbances. Moreover, the proposed control law is also implemented on a VCM servo gantry system for motion tracking. Simulations and experimental results demonstrate good tracking performance, which outperform traditional control approaches. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  10. Invariant-Based Inverse Engineering of Crane Control Parameters

    NASA Astrophysics Data System (ADS)

    González-Resines, S.; Guéry-Odelin, D.; Tobalina, A.; Lizuain, I.; Torrontegui, E.; Muga, J. G.

    2017-11-01

    By applying invariant-based inverse engineering in the small-oscillation regime, we design the time dependence of the control parameters of an overhead crane (trolley displacement and rope length) to transport a load between two positions at different heights with minimal final-energy excitation for a microcanonical ensemble of initial conditions. The analogy between ion transport in multisegmented traps or neutral-atom transport in moving optical lattices and load manipulation by cranes opens a route for a useful transfer of techniques among very different fields.

  11. Reintroduction medicine: whooping cranes in Wisconsin.

    PubMed

    Keller, Dominique L; Hartup, Barry K

    2013-01-01

    This paper presents veterinary management strategies and diagnostic findings in the reintroduction of the endangered whooping crane (Grus americana). Between 2005 and 2010, 63 (27 male, 36 female) hatchling whooping cranes were assigned to a reintroduction project involving autumn release of costume-reared chicks in Wisconsin. Veterinary care included preventive measures and comprehensive pre-release evaluations to improve fitness and reduce translocation of potential disease agents to native habitats. A total of 44 clinically normal birds were released (70% of assigned individuals). Cases of morbidity were classified according to primary body system affected. Musculoskeletal disorders were described in 57 birds (90%); five birds were removed from the project prior to release (8%), all for abnormalities that prevented normal function. Fourteen birds died or were euthanized prior to release (22%); pre-release mortality was attributed to developmental abnormality, predation, trauma or infectious disease. Chronic respiratory aspergillosis, diagnosed in seven birds (11%), was the most common infectious disease of concern. Predation and trauma were primary causes of post-release mortality; no evidence of infectious disease of captive origin was detected in the study population by the end of 2010. The assessment of data accumulated by this project helped to outline successful health management strategies, as well as identify and mitigate ongoing risks to captive whooping cranes that impede reintroduction efforts and achieving management goals for species recovery. © 2013 Wiley Periodicals, Inc.

  12. 30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What requirements must I follow for cranes and... follow for cranes and other material-handling equipment? (a) All cranes installed on fixed platforms must... Maintenance of Offshore Cranes (API RP 2D), incorporated by reference as specified in 30 CFR 250.198. (b) All...

  13. Heavy metal contamination status of Japanese cranes (Grus japonensis) in east Hokkaido, Japan--extensive mercury pollution.

    PubMed

    Teraoka, Hiroki; Kumagai, Yoshihiro; Iwai, Hisae; Haraguchi, Kensaku; Ohba, Takashi; Nakai, Kunihiko; Satoh, Hiroshi; Sakamoto, Mineshi; Momose, Kunikazu; Masatomi, Hiroyuki; Hiraga, Takeo

    2007-02-01

    Japanese cranes (Grus japonensis) of eastern Hokkaido, Japan, and migrants between the Amur River basin and the eastern China-Korea Peninsula, live around fresh and brackish wetlands. Only a few thousand cranes are confirmed to exist in the world, so they are under threat of extinction. To understand the adverse effects of metal accumulation, we measured concentrations of three heavy metals in the liver, kidney, and muscle of 93 Japanese cranes from Hokkaido. The cranes were classified into six categories according to their sex and three life stages. Cadmium and mercury (Hg: total mercury) showed age-dependent but not sex-dependent accumulation in the liver and kidney. Twenty cranes showed 30 microg/g or higher levels of Hg in dry tissue and five adult cranes had more than 100 microg/g in their livers or kidneys. Cadmium concentrations were generally lower in all samples. Two adult cranes showed extremely high lead levels of more than 30 microg/g in their livers, suggesting lead poisoning. These results have highlighted the widespread and high levels of Hg pollution in Japanese cranes in Hokkaido, Japan.

  14. 78 FR 8985 - Cranes and Derricks in Construction: Revising the Exemption for Digger Derricks

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-07

    .... OSHA-2012-0025] RIN 1218-AC75 Cranes and Derricks in Construction: Revising the Exemption for Digger... November 9, 2012, to broaden the exemption for digger derricks in its construction standard for cranes and... broaden the exemption for digger derricks in its construction standard for cranes and derricks. In those...

  15. Capture myopathy in an endangered sandhill crane (Grus canadensis pulla)

    USGS Publications Warehouse

    Carpenter, J.W.; Thomas, N.J.; Reeves, S.

    1991-01-01

    Despite precautions to protect cranes, a 3-year-old endangered Mississippi sandhill crane (Grus canadensis pulla) was found caught in a leghold trap in Gautier, Mississippi, on 11 November 1987. The bird could have been in the trap for up to 16 hr and was standing and struggling to escape when it was discovered. Serum chemistries of the crane on 12 November revealed elevated lactic dehydrogenase (2,880 IU/L), alanine aminotransferase (ALT) (152 IU/L), and aspartate aminotransferase (AST) (>1,000 IU/L) values. Following surgical amputation of a fractured toe, the bird never attempted to stand and was unable to stand even when manually supported. Radiographic and physical examination of both legs did not reveal any anatomical abnormalities. Despite medical care, including supportive therapy, no improvement was observed in the bird's ability to stand and to support itself, and the bird died on 19 November. Serum chemistries and the postmortem and histopathologic findings were compatible with capture myopathy described in other species. Because of the possible susceptibility of long-legged birds such as the Mississippi sandhill crane to capture myopathy, special care must be taken when trapping, handling, chemically immobilizing, and transporting these species. In addition, precautions must be taken when conducting a predator-control program to ensure that nontarget wildlife are unlikely to encounter traps. Capture myopathy has only rarely been observed in wild birds, and this case represents the first report in a Mississippi sandhill crane.

  16. Motion Planning of Two Stacker Cranes in a Large-Scale Automated Storage/Retrieval System

    NASA Astrophysics Data System (ADS)

    Kung, Yiheng; Kobayashi, Yoshimasa; Higashi, Toshimitsu; Ota, Jun

    We propose a method for reducing the computational time of motion planning for stacker cranes. Most automated storage/retrieval systems (AS/RSs) are only equipped with one stacker crane. However, this is logistically challenging, and greater work efficiency in warehouses, such as those using two stacker cranes, is required. In this paper, a warehouse with two stacker cranes working simultaneously is proposed. Unlike warehouses with only one crane, trajectory planning in those with two cranes is very difficult. Since there are two cranes working together, a proper trajectory must be considered to avoid collision. However, verifying collisions is complicated and requires a considerable amount of computational time. As transport work in AS/RSs occurs randomly, motion planning cannot be conducted in advance. Planning an appropriate trajectory within a restricted duration would be a difficult task. We thereby address the current problem of motion planning requiring extensive calculation time. As a solution, we propose a “free-step” to simplify the procedure of collision verification and reduce the computational time. On the other hand, we proposed a method to reschedule the order of collision verification in order to find an appropriate trajectory in less time. By the proposed method, we reduce the calculation time to less than 1/300 of that achieved in former research.

  17. Asbestos fiber release from the brake pads of overhead industrial cranes.

    PubMed

    Spencer, J W; Plisko, M J; Balzer, J L

    1999-06-01

    The purpose of this evaluation was to determine the actual contribution of airborne asbestos fibers to the work environment from the operation of overhead cranes and hoists that use asbestos composition brake pads. The evaluation was conducted in a working manufacturing facility. Other potential sources of asbestos were accounted for by visual inspection and background air monitoring. An overhead crane assembly comprised of a trolley and two hoists was employed for this study. The crane was operated for two consecutive eight-hour shifts representative of a heavy-duty cycle. Forty-four personal and area air samples were collected during the assessment. Asbestos fibers were analyzed for by phase contrast (NIOSH 7400), and transmission electron (NIOSH 7402) microscopy methods. Eight-hour time-weighted average (TWA) asbestos fiber concentrations ranged from < 0.005 to 0.011 fibers/cc (PCM), and < 0.0026 to < 0.0094 f/cc (TEM). There were no asbestos fibers detected by the TEM method from air samples collected during the operation of the cranes.

  18. A comparison of behavior for two cohorts of captive-reared greater sandhill cranes released in northern Arizona

    USGS Publications Warehouse

    Mummert, D.P.; Chambers, C.L.; Ellis, D.H.

    2001-01-01

    To determine how the behavior of greater sandhill cranes (Grus canadensis tabida) changes according to time of year, time of day, and number of days after release, we observed the activities of 2 groups of captive-reared greater sandhill cranes at Mormon Lake, northern Arizona. The behaviors we compared were alert, loafing, sleeping, foraging, preening, locomotion, and other. We found costume-reared subadult greater sandhill cranes that were established at the study site for a year spent more time foraging and being alert towards predators than parent-reared juvenile greater sandhill cranes that were recently released from captivity. We also found that with time juvenile sandhill cranes were increasingly alert and spent less time loafing. It appeared that captive-reared juvenile sandhill cranes learn behavior important for survival from previously released captive-reared cranes.

  19. Large ORU/ Crane evaluations conducted during first EVA of STS-87 (DTO 671)

    NASA Image and Video Library

    1997-11-25

    STS087-718-073 (19 November ? 5 December 1997) --- On the Space Shuttle Columbia's first ever spacewalk (EVA), astronaut Winston E. Scott works with a simulated battery and 156-pound crane carried onboard for the first time this trip of Columbia. The crane's inclusion and the work with it are part of a continuing preparation effort for future work on the International Space Station (ISS). The ongoing project allows for evaluation of tools and operating methods to be applied to the construction of the ISS. This crane device is designed to aid future spacewalkers in transporting Orbital Replacement Units (ORU), with a mass up to 600 pounds (like the simulated battery pictured here), from translating carts on the exterior of ISS to various worksites on the truss structure. Earlier, astronauts Takao Doi (at the base of the crane, out of frame at right), an international mission specialist representing Japan, and Winston E. Scott had installed the crane in a socket along the middle port side of Columbia's cargo bay for the evaluation. The two began the crane operations, long ago manifest for this mission, after completing a contingency spacewalk to snag the free-flying Spartan 201 and berth it in the payload bay (visible in the background).

  20. Development and Evaluation of a Quantitative PCR Assay Targeting Sandhill Crane (Grus canadensis) Fecal Pollution

    EPA Science Inventory

    While the microbial water quality in the Platte River is seasonally impacted by excreta from migrating cranes, there are no methods available to study crane fecal contamination. Here we characterized microbial populations in crane feces using phylogenetic analysis of 16S rRNA gen...

  1. Measurement and Analysis of the Extreme Physical Shock Environment Experienced by Crane-Mounted Radiation Detection Systems.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Boyd, M; Erchinger, J; Marianno, C

    Potentially, radiation detectors at ports of entry could be mounted on container gantry crane spreaders to monitor cargo containers entering and leaving the country. These detectors would have to withstand the extreme physical environment experienced by these spreaders during normal operations. Physical shock data from the gable ends of a spreader were recorded during the loading and unloading of a cargo ship with two Lansmont SAVER 9X30 units (with padding) and two PCB Piezotronics model 340A50 accelerometers (hard mounted). Physical shocks in the form of rapid acceleration were observed in all accelerometer units with values ranging from 0.20 g’s tomore » 199.99 g’s. The majority of the shocks for all the Lansmont and PCB accelerometers were below 50 g’s. The Lansmont recorded mean shocks of 21.83 ± 13.62 g’s and 24.78 ± 11.49 g’s while the PCB accelerometers experienced mean shocks of 34.39 ± 25.51 g’s and 41.77 ± 22.68 g’s for the landside and waterside units, respectively. Encased detector units with external padding should be designed to withstand at least 200 g’s of acceleration without padding and typical shocks of 30 g’s with padding for mounting on a spreader.« less

  2. Behavior of sandhill cranes harnessed with different satellite transmitters

    USGS Publications Warehouse

    Olsen, Glenn H.; Ellis, D.H.; Landfried, S.E.; Miller, L.H.; Klugman, S.S.; Fuller, M.R.; Vermillion, C.H.

    1992-01-01

    The effectiveness of various attachment methods and designs of platform transmitting terminals (PTT's) was tested on captive sandhill cranes (Grus canadensis) at the Patuxent Wildlife Research Center, Laurel, Maryland, during 1989-91. Combinations of attachment and transmitter designs included neoprene cord harness with batteries separate from the transmitter (2 harness designs), Teflon ribbon harness with batteries incorporated into the transmitter package (4 transmitter models), and a package attached directly to the bird with epoxy glue only. Physical effects seen on cranes wearing PTT's ranged from skin lacerations (caused by rubbing of harness material) to no observed effects (other than feather wear). The most successful harness material and design utilized a Teflon ribbon harness with the 4 ribbon ends from the transmitter forming a neck loop and a body loop joined at the sternum. Time spent by sandhill cranes performing most activities did not change after transmitter attachment using this harness method.

  3. Measurement and Modeling of Job Stress of Electric Overhead Traveling Crane Operators

    PubMed Central

    Krishna, Obilisetty B.; Maiti, Jhareswar; Ray, Pradip K.; Samanta, Biswajit; Mandal, Saptarshi; Sarkar, Sobhan

    2015-01-01

    Background In this study, the measurement of job stress of electric overhead traveling crane operators and quantification of the effects of operator and workplace characteristics on job stress were assessed. Methods Job stress was measured on five subscales: employee empowerment, role overload, role ambiguity, rule violation, and job hazard. The characteristics of the operators that were studied were age, experience, body weight, and body height. The workplace characteristics considered were hours of exposure, cabin type, cabin feature, and crane height. The proposed methodology included administration of a questionnaire survey to 76 electric overhead traveling crane operators followed by analysis using analysis of variance and a classification and regression tree. Results The key findings were: (1) the five subscales can be used to measure job stress; (2) employee empowerment was the most significant factor followed by the role overload; (3) workplace characteristics contributed more towards job stress than operator's characteristics; and (4) of the workplace characteristics, crane height was the major contributor. Conclusion The issues related to crane height and cabin feature can be fixed by providing engineering or foolproof solutions than relying on interventions related to the demographic factors. PMID:26929839

  4. [Effects of habitat fragmentation on nesting site selection of red-crowned crane].

    PubMed

    Wan, Dongmei; Gao, Wei; Wang, Qiuyu; Wang, Haitao; Liu, Mingyu

    2002-05-01

    During April and May of 1985, 1995 and 1998, red-crowned crane's nesting and variation of breeding population quantities in Shuangtaihekou National Natural Reserve in Liaoning, and also the habitat fragmentation there were investigated. Associated with previous data of the reserve, red-crowned crane's nesting habitat had been seriously fragmentated into 91 patches from one integrated reed wetland. The area of the smallest patch was 0.37 km2, and the minimum distance of two nests was 304 m. Compared with records of previous data, the minimum area of nesting habitat reduced by 0.72 km2. However, the breeding population quantities of red-crowned crane had maintained at about 30 pairs for a long period. The red-crowned crane adapted to the changed environment by the ecological adaptation strategy of reducing area of nesting habitat.

  5. A statistical model of operational impacts on the framework of the bridge crane

    NASA Astrophysics Data System (ADS)

    Antsev, V. Yu; Tolokonnikov, A. S.; Gorynin, A. D.; Reutov, A. A.

    2017-02-01

    The technical regulations of the Customs Union demands implementation of the risk analysis of the bridge cranes operation at their design stage. The statistical model has been developed for performance of random calculations of risks, allowing us to model possible operational influences on the bridge crane metal structure in their various combination. The statistical model is practically actualized in the software product automated calculation of risks of failure occurrence of bridge cranes.

  6. Hormonal treatment and flight feather molt in immature Sandhill Cranes

    USGS Publications Warehouse

    Gee, G.F.; Lewis, J.C.

    1982-01-01

    Molt, the production of a new generation of feathers, is a poorly understood physiological phenomenon in nondomestic birds. Often in large birds like geese, flight is restricted by clipping the primary remiges on 1 wing and flight is restored after the molt when the primaries are replaced. A similar technique would be desirable for use with cranes conditioned for release to the native habitat. However, immature sandhill cranes (Grus canadensis) did not appear to replace their primaries annually; therefore, we studied their flight feather molt (from 4 months to 3.5 years of age) and attempted to influence molting. Under natural conditions tail feathers (rectrices) were replaced annually and all secondaries replaced in 2.5-year-old birds. However, replacement of primaries in immature sandhill cranes appears to be a gradual process beginning the 2nd year; about 33% of the original primaries (present at 10 months of age) persisted in the 3.5-year-oId birds. Pulling out the primaries of immature sandhill cranes induces the growth of new primaries, as is true of many other birds. However, the new primaries were incapable of supporting flight, fell out repeatedly, and those that remained were often deformed. Pulling the primaries, under the influence of tranquilizers and anesthetics to relax the feather papillae, also did not induce normal growth of the replacement primaries. Progesterone (including excessively high doses), thyroxine, and follicle stimulating hormone, although effective in inducing feather replacement in domestic poultry, had no effect on crane molt.

  7. Climate change, cranes, and temperate floodplain ecosystems

    USGS Publications Warehouse

    King, Sammy L.

    2010-01-01

    Floodplain ecosystems provide important habitat to cranes globally. Lateral, longitudinal, vertical, and temporal hydrologic connectivity in rivers is essential to maintaining the functions and values of these systems. Agricultural development, flood control, water diversions, dams, and other anthropogenic activities have greatly affected hydrologic connectivity of river systems worldwide and altered the functional capacity of these systems. Although the specific effects of climate change in any given area are unknown, increased intensity and frequency of flooding and droughts and increased air and water temperatures are among many potential effects that can act synergistically with existing human modifications in these systems to create even greater challenges in maintaining ecosystem productivity. In this paper, I review basic hydrologic and geomorphic processes of river systems and use three North American rivers (Guadalupe, Platte, and Rio Grande) that are important to cranes as case studies to illustrate the challenges facing managers tasked with balancing the needs of cranes and people in the face of an uncertain climatic future. Each river system has unique natural and anthropogenic characteristics that will affect conservation strategies. Mitigating the effects of climate change on river systems necessitates an understanding of river/floodplain/landscape linkages, which include people and their laws as well as existing floodplain ecosystem conditions.

  8. Exertional myopathy in whooping cranes (Grus americana) with prognostic guidelines.

    PubMed

    Hanley, Christopher S; Thomas, Nancy J; Paul-Murphy, Joanne; Hartup, Barry K

    2005-09-01

    Exertional myopathy developed in three whooping cranes (Grus americana) secondary to routine capture, handling, and trauma. Presumptive diagnosis of exertional myopathy was based on history of recent capture or trauma, clinical signs, and elevation of aspartate aminotransferase, alanine aminotransferase, creatine kinase, lactate dehydrogenase, and serum potassium. Treatments were attempted in each case, but ultimately were not successful. Gross and microscopic lesions at necropsy confirmed the diagnosis in each case, with the leg musculature most severely affected. Guidelines for determining prognosis of exertional myopathy in cranes have been included based on the analysis of these cases and others in the literature. As treatment is largely unrewarding, prevention remains the key in controlling exertional myopathy. Identification of predisposing factors and proper handling, immobilization, and transportation techniques can help prevent development of exertional myopathy in cranes.

  9. Exertional myopathy in whooping cranes (Grus americana) with prognostic guidlelines

    USGS Publications Warehouse

    Hanley, C.S.; Thomas, N.J.; Paul-Murphy, P.; Hartup, B.K.

    2005-01-01

    Exertional myopathy developed in three whooping cranes (Grus americana) secondary to routine capture, handling, and trauma. Presumptive diagnosis of exertional myopathy was based on history of recent capture or trauma, clinical signs, and elevation of aspartate aminotransferase, alanine aminotransferase, creatine kinase, lactate dehydrogenase, and serum potassium. Treatments were attempted in each case, but ultimately were not successful. Gross and microscopic lesions at necropsy confirmed the diagnosis in each case, with the leg musculature most severely affected. Guidelines for determining prognosis of exertional myopathy in cranes have been included based on the analysis of these cases and others in the literature. As treatment is largely unrewarding, prevention remains the key in controlling exertional myopathy. Identification of predisposing factors and proper handling, immobilization, and transportation techniques can help prevent development of exertional myopathy in cranes.

  10. Seasonal movements and multiscale habitat selection of Whooping Crane (Grus americana) in natural and agricultural wetlands

    USGS Publications Warehouse

    Pickens, Bradley A.; King, Sammy L.; Vasseur, Phillip L.; Zimorski, Sara E.; Selman, Will

    2017-01-01

    Eleven of 15 species of cranes (family: Gruidae) are considered vulnerable or endangered, and the increase of agriculture and aquaculture at the expense of natural wetlands and grasslands is a threat to Gruidae worldwide. A reintroduced population of Whooping Crane (Grus americana) was studied in coastal and agricultural wetlands of Louisiana and Texas, USA. The objectives were to compare Whooping Crane movements across seasons, quantify multiscale habitat selection, and identify seasonal shifts in selection. Whooping Cranes (n = 53) were tracked with satellite transmitters to estimate seasonal core-use areas (50% home range contours) via Brownian bridge movement models and assess habitat selection. Whooping Crane core-use areas (n = 283) ranged from 4.7 to 438.0 km2, and habitat selection changed seasonally as shallow water availability varied. Whooping Crane core-use areas were composed of more fresh marsh in spring/summer, but shifted towards rice and crawfish (Procambarus spp.) aquaculture in the fall/winter. Within core-use areas, aquaculture was most strongly selected, particularly in fall when fresh marsh became unsuitable. Overall, the shifting of Whooping Crane habitat selection over seasons is likely to require large, heterogeneous areas. Whooping Crane use of agricultural and natural wetlands may depend on spatio-temporal dynamics of water depth.

  11. 29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

  12. 29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

  13. 29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

  14. 29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

  15. 29 CFR 1918.66 - Cranes and derricks other than vessel's gear.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... body of the crane and any fixed structure or between parts of the crane. (3) Prohibited usage. (i....g., a computer) providing indications in the cab according to the radius and load at the moment; or... survey (see § 1918.11) and at such additional times as may be recommended by the manufacturer. (iv) When...

  16. Asbestos fiber release from the brake pads of overhead industrial cranes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Spencer, J.W.; Plisko, M.J.; Balzer, J.L.

    The purpose of this evaluation was to determine the actual contribution of airborne asbestos fibers to the work environment from the operation of overhead cranes and hoists that use asbestos composition brake pads. The evaluation was conducted in a working manufacturing facility. Other potential sources of asbestos were accounted for by visual inspection and background air monitoring. An overhead crane assembly comprised of a trolley and two hoists was employed for this study. The crane was operated for two consecutive eight-hour shifts representative of a heavy-duty cycle. Forty-four personal and area air samples were collected during the assessment. Asbestos fibersmore » were analyzed for by phase contrast (NIOSH 7400), and transmission electron (NIOSH 7402) microscopy methods. Eight-hour time-weighted average (TWA) asbestos fiber concentrations ranges from <0.005 to 0.011 fibers/cc (PCM), and <0.0026 to <0.0094f/cc (TEM). There were no asbestos fibers detected by the TEM method from air samples collected during the operation of the cranes.« less

  17. Identification, inheritance, and linkage of B-G-like and MHC class I genes in cranes

    USGS Publications Warehouse

    Jarvi, S.I.; Goto, R.M.; Gee, G.F.; Briles, W.E.; Miller, M.M.

    1999-01-01

    We identified B-G-like genes in the whooping and Florida sandhill cranes and linked them to the major histocompatibility complex (MHC). We evaluated the inheritance of B-G-like genes in families of whooping and Florida sandhill cranes using restriction fragment patterns (RFPs). Two B-G-like genes, designated wcbgl and wcbg2, were located within 8 kb of one another. The fully sequenced wcbg2 gene encodes a B-G IgV-like domain, an additional Ig-like domain, a transmembrane domain, and a single heptad domain typical of '-helical coiled coils. Patterns of restriction fragments in DNA from the whooping crane and from a number of other species indicate that the B-G-like gene families of cranes are large with diverse sequences. Segregation of RFPs in families of Florida sandhill cranes provide evidence for genetic polymorphism in the B-G-like genes. The restriction fragments generally segregated in concert with MHC haplotypes assigned by serological typing and by single stranded conformational polymorphism (SSCP) assays based in the second exon of the crane MHC class I genes. This study supports the concept of a long-term association of polymorphic B-G-like genes with the MHC. It also establishes SSCP as a means for evaluating MHC genetic variability in cranes.

  18. Identification, inheritance, and linkage of B-G-like and MHC class I genes in cranes.

    PubMed

    Jarvi, S I; Goto, R M; Gee, G F; Briles, W E; Miller, M M

    1999-01-01

    We identified B-G-like genes in the whooping and Florida sandhill cranes and linked them to the major histocompatibility complex (MHC). We evaluated the inheritance of B-G-like genes in families of whooping and Florida sandhill cranes using restriction fragment patterns (RFPs). Two B-G-like genes, designated wcbg1 and wcbg2, were located within 8 kb of one another. The fully sequenced wcbg2 gene encodes a B-G IgV-like domain, an additional Ig-like domain, a transmembrane domain, and a single heptad domain typical of alpha-helical coiled coils. Patterns of restriction fragments in DNA from the whooping crane and from a number of other species indicate that the B-G-like gene families of cranes are large with diverse sequences. Segregation of RFPs in families of Florida sandhill cranes provide evidence for genetic polymorphism in the B-G-like genes. The restriction fragments generally segregated in concert with MHC haplotypes assigned by serological typing and by single stranded conformational polymorphism (SSCP) assays based in the second exon of the crane MHC class I genes. This study supports the concept of a long-term association of polymorphic B-G-like genes with the MHC. It also establishes SSCP as a means for evaluating MHC genetic variability in cranes.

  19. Commissioning of a proton gantry equipped with dual x-ray imagers and a robotic patient positioner, and evaluation of the accuracy of single-beam image registration for this system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wang, Ning; Ghebremedhin, Abiel; Patyal, Baldev, E-mail: bpatyal@llu.eduss

    Purpose: To check the accuracy of a gantry equipped with dual x-ray imagers and a robotic patient positioner for proton radiotherapy, and to evaluate the accuracy and feasibility of single-beam registration using the robotic positioner. Methods: One of the proton treatment rooms at their institution was upgraded to include a robotic patient positioner (couch) with 6 degrees of freedom and dual orthogonal kilovoltage x-ray imaging panels. The wander of the proton beam central axis, the wander of the beamline, and the orthogonal image panel crosswires from the gantry isocenter were measured for different gantry angles. The couch movement accuracy andmore » couch wander from the gantry isocenter were measured for couch loadings of 50–300 lb with couch rotations from 0° to ±90°. The combined accuracy of the gantry, couch, and imagers was checked using a custom-made 30 × 30 × 30 cm{sup 3} Styrofoam phantom with beekleys embedded in it. A treatment in this room can be set up and registered at a setup field location, then moved precisely to any other treatment location without requiring additional image registration. The accuracy of the single-beam registration strategy was checked for treatments containing multiple beams with different combinations of gantry angles, couch yaws, and beam locations. Results: The proton beam central axis wander from the gantry isocenter was within 0.5 mm with gantry rotations in both clockwise (CW) and counterclockwise (CCW) directions. The maximum wander of the beamline and orthogonal imager crosswire centers from the gantry isocenter were within 0.5 and 0.8 mm, respectively, with the gantry rotations in CW and CCW directions. Vertical and horizontal couch wanders from the gantry isocenter were within 0.4 and 1.3 mm, respectively, for couch yaw from 0° to ±90°. For a treatment with multiple beams with different gantry angles, couch yaws, and beam locations, the measured displacements of treatment beam locations from the one

  20. Location and agricultural practices influence spring use of harvested cornfields by cranes and geese in Nebraska

    USGS Publications Warehouse

    Anteau, Michael J.; Sherfy, Mark H.; Bishop, Andrew A.

    2011-01-01

    Millions of ducks, geese, and sandhill cranes (Grus canadensis; hereafter cranes) stop in the Central Platte River Valley (CPRV) of Nebraska to store nutrients for migration and reproduction by consuming corn remaining in fields after harvest. We examined factors that influence use of cornfields by cranes and geese (all mid-continent species combined; e.g., Anser, Chen, and Branta spp.) because it is a key step to efficient conservation planning aimed at ensuring that adequate food resources are available to migratory birds stopping in the CPRV. Distance to night-time roost site, segment of the CPRV (west to east), and agricultural practices (post-harvest treatment of cornfields: idle, grazed, mulched, mulched and grazed, and tilled) were the most important and influential variables in our models for geese and cranes. Probability of cornfield use by geese and cranes decreased with increasing distance from the closest potential roosting site. The use of cornfields by geese increased with the density of corn present there during the early migration period, but field use by cranes appeared not to be influenced by early migration corn density. However, probability of cornfield use by cranes did increase with the amount of wet grassland habitat within 4.8 km of the field. Geese were most likely to use fields that were tilled and least likely to use fields that were mulched and grazed. Cranes were most likely to use fields that were mulched and least likely to use fields that were tilled, but grazing appeared not to influence the likelihood of field use by cranes. Geese were more likely to use cornfields in western segments of the CPRV, but cranes were more likely to use cornfields in eastern segments. Our data suggest that managers could favor crane use of fields and reduce direct competition with geese by reducing fall and spring tilling and increasing mulching. Moreover, crane conservation efforts would be most beneficial if they were focused in the eastern portions

  1. Location and agricultural practices influence spring use of harvested cornfields by cranes and geese in Nebraska

    USGS Publications Warehouse

    Anteau, M.J.; Sherfy, M.H.; Bishop, A.A.

    2011-01-01

    Millions of ducks, geese, and sandhill cranes (Grus canadensis; hereafter cranes) stop in the Central Platte River Valley (CPRV) of Nebraska to store nutrients for migration and reproduction by consuming corn remaining in fields after harvest. We examined factors that influence use of cornfields by cranes and geese (all mid-continent species combined; e.g., Anser, Chen, and Branta spp.) because it is a key step to efficient conservation planning aimed at ensuring that adequate food resources are available to migratory birds stopping in the CPRV. Distance to night-time roost site, segment of the CPRV (west to east), and agricultural practices (post-harvest treatment of cornfields: idle, grazed, mulched, mulched and grazed, and tilled) were the most important and influential variables in our models for geese and cranes. Probability of cornfield use by geese and cranes decreased with increasing distance from the closest potential roosting site. The use of cornfields by geese increased with the density of corn present there during the early migration period, but field use by cranes appeared not to be influenced by early migration corn density. However, probability of cornfield use by cranes did increase with the amount of wet grassland habitat within 4.8 km of the field. Geese were most likely to use fields that were tilled and least likely to use fields that were mulched and grazed. Cranes were most likely to use fields that were mulched and least likely to use fields that were tilled, but grazing appeared not to influence the likelihood of field use by cranes. Geese were more likely to use cornfields in western segments of the CPRV, but cranes were more likely to use cornfields in eastern segments. Our data suggest that managers could favor crane use of fields and reduce direct competition with geese by reducing fall and spring tilling and increasing mulching. Moreover, crane conservation efforts would be most beneficial if they were focused in the eastern portions

  2. NSWC Crane Aerospace Cell Test History Database

    NASA Technical Reports Server (NTRS)

    Brown, Harry; Moore, Bruce

    1994-01-01

    The Aerospace Cell Test History Database was developed to provide project engineers and scientists ready access to the data obtained from testing of aerospace cell designs at Naval Surface Warfare Center, Crane Division. The database is intended for use by all aerospace engineers and scientists involved in the design of power systems for satellites. Specifically, the database will provide a tool for project engineers to review the progress of their test at Crane and to have ready access to data for evaluation. Additionally, the database will provide a history of test results that designers can draw upon to answer questions about cell performance under certain test conditions and aid in selection of a cell for a satellite battery. Viewgraphs are included.

  3. 78 FR 36572 - Certain Crawler Cranes and Components Thereof Notice of Receipt of Complaint; Solicitation of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-18

    ... INTERNATIONAL TRADE COMMISSION [Docket No. 2960] Certain Crawler Cranes and Components Thereof... Trade Commission has received a complaint entitled Certain Crawler Cranes and Components Thereof, DN...) of the Commission's Rules of Practice and Procedure filed on behalf of Manitowoc Cranes, LLC on June...

  4. Isolation and characterization of major histocompatibility complex class II B genes in cranes.

    PubMed

    Kohyama, Tetsuo I; Akiyama, Takuya; Nishida, Chizuko; Takami, Kazutoshi; Onuma, Manabu; Momose, Kunikazu; Masuda, Ryuichi

    2015-11-01

    In this study, we isolated and characterized the major histocompatibility complex (MHC) class II B genes in cranes. Genomic sequences spanning exons 1 to 4 were amplified and determined in 13 crane species and three other species closely related to cranes. In all, 55 unique sequences were identified, and at least two polymorphic MHC class II B loci were found in most species. An analysis of sequence polymorphisms showed the signature of positive selection and recombination. A phylogenetic reconstruction based on exon 2 sequences indicated that trans-species polymorphism has persisted for at least 10 million years, whereas phylogenetic analyses of the sequences flanking exon 2 revealed a pattern of concerted evolution. These results suggest that both balancing selection and recombination play important roles in the crane MHC evolution.

  5. Diet Shift and Its Impact on Foraging Behavior of Siberian Crane (Grus Leucogeranus) in Poyang Lake

    PubMed Central

    Jia, Yifei; Jiao, Shengwu; Zhang, Yamian; Zhou, Yan; Lei, Guangchun; Liu, Guanhua

    2013-01-01

    The study of habitat selection and diet has a long history in ecology. This is often used to assess the functional roles of wetland in biodiversity conservation. Shifting habitat and diet may be one of the survival strategies during extremely adverse conditions. Therefore, sudden changes in habitat selection may indicate the deterioration of the habitat quality, and management interventions are necessary. Siberian crane (Grus leucogeranus) became critically endangered due to loss of habitat, and is currently a global conservation focus. Every winter, more than 95% of the species' global population congregates at Poyang Lake, and feeds on tubers of Vallisneria spiralis in shallow water and mudflat habitat. In this study, we reported the first sighting of large numbers of Siberian cranes foraging at wet meadows, where they fed on a different plant, Potentilla limprichtii due to extreme scarcity of their preferred tuber. To understand how well the cranes adapted to such unusual habitat, field surveys to assess the distribution of cranes across different habitats, and food availability in each habitat were carried out in the winter of 2011. Field observations on crane behaviors at different habitats were also conducted. Results show that cranes displayed significantly different behavior patterns when using the wet meadow, compared to the crane's optimal habitat - shallow water and mudflat. Both juveniles and adults spent significantly less time foraging, and more time alerting in meadows than in shallow waters and mudflats. These results indicated that the meadow might be a suboptimal wintering ground for Siberian crane, which helped the cranes survive from extreme unfavorable conditions. To some degree, this finding alleviates the general concern over the fluctuating of its food resources which was caused by hydrological disturbances. However, more studies are needed to assess the consequences of such diet and habitat shift for crane survival. PMID:23823943

  6. Diet Shift and Its Impact on Foraging Behavior of Siberian Crane (Grus Leucogeranus) in Poyang Lake.

    PubMed

    Jia, Yifei; Jiao, Shengwu; Zhang, Yamian; Zhou, Yan; Lei, Guangchun; Liu, Guanhua

    2013-01-01

    The study of habitat selection and diet has a long history in ecology. This is often used to assess the functional roles of wetland in biodiversity conservation. Shifting habitat and diet may be one of the survival strategies during extremely adverse conditions. Therefore, sudden changes in habitat selection may indicate the deterioration of the habitat quality, and management interventions are necessary. Siberian crane (Grus leucogeranus) became critically endangered due to loss of habitat, and is currently a global conservation focus. Every winter, more than 95% of the species' global population congregates at Poyang Lake, and feeds on tubers of Vallisneria spiralis in shallow water and mudflat habitat. In this study, we reported the first sighting of large numbers of Siberian cranes foraging at wet meadows, where they fed on a different plant, Potentilla limprichtii due to extreme scarcity of their preferred tuber. To understand how well the cranes adapted to such unusual habitat, field surveys to assess the distribution of cranes across different habitats, and food availability in each habitat were carried out in the winter of 2011. Field observations on crane behaviors at different habitats were also conducted. Results show that cranes displayed significantly different behavior patterns when using the wet meadow, compared to the crane's optimal habitat - shallow water and mudflat. Both juveniles and adults spent significantly less time foraging, and more time alerting in meadows than in shallow waters and mudflats. These results indicated that the meadow might be a suboptimal wintering ground for Siberian crane, which helped the cranes survive from extreme unfavorable conditions. To some degree, this finding alleviates the general concern over the fluctuating of its food resources which was caused by hydrological disturbances. However, more studies are needed to assess the consequences of such diet and habitat shift for crane survival.

  7. Curiosity Sky Crane Maneuver, Artist Concept

    NASA Image and Video Library

    2011-10-03

    This artist concept shows the sky crane maneuver during the descent of NASA Curiosity rover to the Martian surface. The sheer size of the rover over one ton, or 900 kilograms would preclude it from taking advantage of an airbag-assisted landing.

  8. SU-F-T-264: VMAT QA with 2D Radiation Measuring Equipment Attached to Gantry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fung, A

    2016-06-15

    Purpose: To introduce a method of VMAT QA by 2D measuring device. The 2D device is attached to the gantry throughout measurement duration. This eliminates error caused by the angular dependence of the radiation detectors. Methods: A 2D radiation measuring device was attached to the gantry of linear accelerator. The center of the detector plane was at the isocenter. For each patient plan, two verification plans were created for QA purpose. One was like an ordinary VMAT plan, to be used for radiation delivery. The other is a plan with gantry angle fixed at zero, so the dose distribution asmore » seen by the rotating 2D device. Points above 10% dose threshold were analyzed. Data is in tolerance if it fits within the 3 mm or 3% dose gamma criteria. For each patient, the plan was passed when 95% of all the points in the 2D matrix fit the gamma criteria. The following statistics were calculated: number of patient plans passed, percentage of all points passed, average percentage difference of all points. Results: VMAT QA was performed for patients during one year in our department, and the results were analyzed. All irradiation was with 6 MV photon beam. Each plan has calculated and measured doses compared. After collecting one year’s result, with 81 patient plans analyzed, all (100%) of the plans passed the gamma criteria. Of the points analyzed from all plans, 98.8% of all points passed. Conclusion: This method of attaching a 2D measuring device on the linac gantry proves to be an accurate way for VMAT QA. It is simple to use and low cost, and it eliminates the problem of directional dependence.« less

  9. Research note: The isolation of a herpes virus from captive cranes with an inclusion body disease

    USGS Publications Warehouse

    Docherty, D.E.; Henning, D.J.

    1980-01-01

    A viral agent, identified as a herpesvirus and tentatively called 'inclusion body disease of cranes' (IBDC), was isolated from captive cranes involved in a die-off at the International Crane Foundation near Baraboo, Wisconsin. Preliminary animal susceptibility tests, based on experimental infections, suggested that White Pekin ducklings up to 17 days old and adult coots were susceptible to the IBDC virus whereas 16-day-old White Leghorn chicks and 64-day-old Muscovy ducks were not. No serum antibody to IBDC virus was detected in 95 wild sandhill cranes collected in Wisconsin or Indiana in 1976 and 1977. However, 9 of 11 captive cranes in the affected area at the ICF had antibody to this agent.

  10. Sandhill cranes hunting food at KSC

    NASA Technical Reports Server (NTRS)

    2000-01-01

    A pair of Sandhill Cranes searches for food with their still- fluffy fledgling close by. The trio have been seen wandering the grassy areas in the KSC Launch Complex 39 area. Sandhill cranes range from Siberia, Alaska and Arctic islands to Michigan, Minnesota and California; from Florida to Texas. They prefer large freshwater marshes, prairie ponds and marshy tundra. KSC shares a boundary with the Merritt Island National Wildlife Refuge, which encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects.

  11. Coccidian Parasites and Conservation Implications for the Endangered Whooping Crane (Grus americana)

    PubMed Central

    Bertram, Miranda R.; Hamer, Gabriel L.; Snowden, Karen F.; Hartup, Barry K.; Hamer, Sarah A.

    2015-01-01

    While the population of endangered whooping cranes (Grus americana) has grown from 15 individuals in 1941 to an estimated 304 birds today, the population growth is not sufficient to support a down-listing of the species to threatened status. The degree to which disease may be limiting the population growth of whooping cranes is unknown. One disease of potential concern is caused by two crane-associated Eimeria species: Eimeria gruis and E. reichenowi. Unlike most species of Eimeria, which are localized to the intestinal tract, these crane-associated species may multiply systemically and cause a potentially fatal disease. Using a non-invasive sampling approach, we assessed the prevalence and phenology of Eimeria oocysts in whooping crane fecal samples collected across two winter seasons (November 2012–April 2014) at the Aransas National Wildlife Refuge along the Texas Gulf coast. We also compared the ability of microscopy and PCR to detect Eimeria in fecal samples. Across both years, 26.5% (n = 328) of fecal samples were positive for Eimeria based on microscopy. Although the sensitivity of PCR for detecting Eimeria infections seemed to be less than that of microscopy in the first year of the study (8.9% vs. 29.3%, respectively), an improved DNA extraction protocol resulted in increased sensitivity of PCR relative to microscopy in the second year of the study (27.6% and 20.8%, respectively). The proportion of positive samples did not vary significantly between years or among sampling sites. The proportion of Eimeria positive fecal samples varied with date of collection, but there was no consistent pattern of parasite shedding between the two years. We demonstrate that non-invasive fecal collections combined with PCR and DNA sequencing techniques provides a useful tool for monitoring Eimeria infection in cranes. Understanding the epidemiology of coccidiosis is important for management efforts to increase population growth of the endangered whooping crane. PMID

  12. Behavior comparisons for whooping cranes raised by costumed caregivers and trained for an ultralight-led migration

    USGS Publications Warehouse

    Olsen, Glenn H.; Folk, Martin J.; Nesbitt, Stephen A.

    2008-01-01

    The successful reintroduction program being run by the Whooping Crane Eastern Partnership using whooping cranes (Grus americana) trained to fly behind ultralight aircraft depends on a supply of these trained crane colts each year. The crane colts are hatched from eggs contributed by the various partners and trained to follow costume clad humans and ultralight aircraft at USGS Patuxent Wildlife Research Center, Laurel, Maryland, USA. After several seasons of raising small numbers of crane colts (7-14), we wanted to increase the number of birds being trained, but were restrained by limits in our facilities. By altering the established husbandry and training program to allow the use of a recently modified facility, we have increased the number of colts raised for this release program. However, we did not know whether the new facility and husbandry regime would significantly alter the behavior of the colts. Therefore, we have begun a two year study to determine if there are differences in the behavior of cranes raised by the two methods, and if any of the differences discovered relate directly to whooping crane survival and migration skills in the release program.

  13. 76 FR 16764 - Crane & Company; Notice of Application Tendered for Filing With the Commission and Soliciting...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-25

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13583-001] Crane & Company... c. Date filed: March 9, 2011 d. Applicant: Crane & Company e. Name of Project: Byron Weston... connected to the Crane & Company mill complex. The proposed project is estimated to generate an average of...

  14. 29 CFR 1919.28 - Unit proof tests-cranes and gear accessory thereto.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Unit proof tests-cranes and gear accessory thereto. 1919.28... ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) GEAR CERTIFICATION Certification of Vessels: Tests and Proof Loads; Heat Treatment; Competent Persons § 1919.28 Unit proof tests—cranes and gear accessory thereto...

  15. ETRCF, TRA654, INTERIOR. CAMERA IS ON MAIN FLOOR. NOTE CRANE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR-CF, TRA-654, INTERIOR. CAMERA IS ON MAIN FLOOR. NOTE CRANE HOOKS. ELECTRICAL EQUIPMENT IS PART OF PAST EXPERIMENT. DOOR AT LEFT EDGE OF VIEW LEADS TO REACTOR SERVICE BUILDING, TRA-635. INL NEGATIVE NO. HD24-1-2. Mike Crane, Photographer, ca. 2003 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  16. ETR, TRA642. NORTHSOUTH SECTION, LOOKING WEST. STEELFRAME ROOF, CRANE RAIL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR, TRA-642. NORTH-SOUTH SECTION, LOOKING WEST. STEEL-FRAME ROOF, CRANE RAIL, AND CRANES. COOLANT PIPE TUNNEL LEADING TO REACTOR FROM EAST. (THIS WAS A PRELIMINARY CONCEPT DRAWING.) KAISER ETR-5528-MTR-642-A-4, 11/1955. INL INDEX NO. 532-0642-00-486-100912, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  17. SURVEY OF GROSS AND HISTOPATHOLOGIC FINDINGS IN TWO WINTERING SUBPOPULATIONS OF SANDHILL CRANES ( ANTIGONE CANADENSIS).

    PubMed

    Hensel, Martha; Bertram, Miranda; Rech, Raquel; Hamer, Gabriel L; Hamer, Sarah A

    2018-01-01

    :  Sandhill Cranes ( Antigone canadensis) of the midcontinent population (MCP) and Rocky Mountain population (RMP) are migratory game birds with stable populations that travel between Canada and the southern US and Mexico. In the winters of 2012-14, we performed gross and histologic examinations of 43 hunter-harvested Sandhill Cranes in Texas (MCP) and New Mexico (RMP) to assess the impact of disease on populations. Lesions were significantly more common in the MCP relative to the RMP, likely reflecting differential environmental exposure to pathogens and parasites. Grossly, liver nodules and esophageal granulomas were present in 8-39% of birds. In feces from over half of birds, we found coccidian oocysts with mitochondrial gene sequences identical to those of Eimeria gruis and Eimeria reichenowi previously obtained from sympatric Whooping Cranes ( Grus americana). Over one-quarter of birds had liver and cardiac lesions suggestive of disseminated visceral coccidiosis. We documented proliferative colitis due to Cryptosporidium in a wild Sandhill Crane. Additionally, several endoparasites were found in histologic sections from several cranes, including a bird with respiratory trematodiasis and two birds with Tetrameres sp. in the proventriculus associated with ductal ectasia. In addition to describing lesions and parasites that impact Sandhill Crane health, these pathology data may also be relevant for the conservation of endangered Whooping Cranes using a surrogate species approach.

  18. Large ORU/ Crane evaluations conducted during first EVA of STS-87 (DTO 671)

    NASA Image and Video Library

    1997-11-25

    STS087-718-069 (19 November ? 5 December 1997) --- On the Space Shuttle Columbia's first ever spacewalk (EVA), astronaut Takao Doi works with a 156-pound crane carried onboard for the first time this trip of Columbia. The crane's inclusion and the work with it are part of a continuing preparation effort for future work on the International Space Station (ISS). The ongoing project allows for evaluation of tools and operating methods to be applied to the construction of the Space Station. This crane device is designed to aid future spacewalkers in transporting Orbital Replacement Units (ORU), with a mass up to 600 pounds (like the simulated battery pictured here), from translating carts on the exterior of ISS to various worksites on the truss structure. Earlier Doi, an international mission specialist representing Japan, and astronaut Winston E. Scott had installed the crane in a socket along the middle port side of Columbia's cargo bay for the evaluation. The two began the crane operations, long ago manifest for this mission, after completing a contingency spacewalk to snag the free-flying Spartan 201 and berth it in the payload bay (visible in the background).

  19. Fate of the survivors of the 1995 and 1996 Arizona trucking migrations of costume-reared greater sandhill cranes

    USGS Publications Warehouse

    Mummert, D.P.; Ellis, D.H.; Chambers, C.L.

    2001-01-01

    In 1995 and 1996, we trained 2 groups of costume-reared greater sandhill cranes (Grus canadensis tabida) (10 in 1995, 14 in 1996) to follow a truck. Thereafter we led 10 in 1995 and 12 in 1996 from Garland Prairie, northern Arizona, to the Buenos Aires National Wildlife Refuge, southern Arizona (ca. 620 km). These techniques were being developed to create additional, disjunct populations of the whooping crane (G. americana). The cranes taught the migration route in 1995 did not follow the desired migration route in 1996 but did travel north 140 km along the route in spring 1997. By the summer of 1997, we did not know the locations of any of these birds. Results were better for the 1996 tracking cranes. Between 1997 and 1999 there was a 92% (11 of 12) success rate for the 1996 trucking cranes with known locations flying unassisted from the summering to wintering grounds. Through 1999, 7 of the 12 cranes became lost on flights from the wintering to summering grounds. (Some of the trucking cranes apparently followed wild cranes to or toward breeding grounds.)

  20. Distribution, densities, and ecology of Siberian cranes in the Khroma River region of northern Yakutia in northeastern Russia

    USGS Publications Warehouse

    Bysykatova, Inga P.; Krapu, Gary L.; Germogenov, Nicolai I.; Buhl, Deborah A.; Aborn, David

    2014-01-01

    The Siberian crane (Grus leucogeranus) is the third rarest crane species in the world with a breeding range now centered on 3 core areas and a buffer zone in the arctic of northern Yakutia in northeastern Russia. During 16 July-2 August 2009, we undertook ground surveys within the Khroma River core breeding area, surrounding buffer zone, and lands lying to the west of the known rbeeding range to estimate densities and determine habitat use and social status of Siberian cranes. A total of 142 Siberian cranes were sighted (including 55 pairs) at 54 locations with 32 cranes (including 13 pairs) sighted outside the currently known breeding range in the lower drainages of the Syalakh and Syuryuktyakh Rivers. After adjusting for a probability of detection of 0.484 (95% CI = 0.281-0.833), Siberian crane densities in the Khroma core area and the buffer zone averaged 0.0921 cranes/km2 and 0.0363 cranes/km2, respectively. A majority of cranes (n = 93 [65%]) occurred in complexes of large basin wetlands, with use centered in those having extensive beds of pendant grass (Arctophila fulva). Of the 142 cranes seen, 110 (77%) were paired, 21 (15%) were singles, and 11 (8%) were in groups of 3-5. The Khroma core supports 1 of 2 large concentrations of breeding Siberian cranes remaining in the wild; therefore, we recommend that consideration be given to designating a nature reserve that would encompass the Khroma core, adjacent buffer zone, and lands to the west (including coastal tundra areas along the lower drainages of the Syalah and Syuryuktyah Rivers). Further research is needed to gain additional insight into Siberian crane distribution and numbers on lands beyond the currently delineated western boundary of the Siberian crane breeding range in the Ust-Yana District of northern Yakutia. Important gaps remain in information needed to effectively guide conservation efforts for the Eastern Population, and recent advances in remote tracking technology offer potential

  1. Image movement of the Elekta EPID during gantry rotation: Effects on the verification of dose distributions.

    PubMed

    Köhn, J; Licher, J; Mielke, M; Loutfi-Krauss, B; Blümer, N; Heine, B; Rödel, C; Scherf, C; Ramm, U

    2017-02-01

    The use of Electronic Portal Imaging Devices (EPIDs) to acquire dosimetric information, especially for 3D-back-projection, has been increasingly extended. For a precise back-projection, the accurate knowledge of the movement characteristics of the EPID during gantry rotation is an essential requirement. Measurements were conducted with different alignments of steel balls, which were mounted on the treatment table to avoid secondary effects such as the mechanical sag of gantry or jaws. The image movement of the EPID was determined by comparing the predicted projections of the phantoms with the EPID acquired image. Effects on dosimetric verifications were evaluated by γ-evaluation. The measurement results showed that the shift of the EPID image is larger in Y direction than in X direction. A maximum rotation of 0.3° and nodding of 2.4° of the detector was calculated. Changes in SDD were found up to 10mm. The angles of nodding are overall higher at discrete gantry angles in comparison to images detected for continuous rotation. Using these results we were able to correct the EPID images used for verification measurements. γ-evaluation revealed a significantly improved agreement between planned and measured EPID signal values. The measurement methods and algorithms introduced in this study are simple and comprehensive. Using these methods and algorithms we were able to quantify the major effects on geometrical and dosimetric characteristics. This allows the correction of EPID signal measurements for these effects related to the gantry angle, leading to an improved γ-evaluation for treatment plans. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  2. 30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

  3. 30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

  4. 30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

  5. Effects of captivity and artificial breeding on microbiota in feces of the red-crowned crane (Grus japonensis)

    PubMed Central

    Xie, Yuwei; Xia, Pu; Wang, Hui; Yu, Hongxia; Giesy, John P.; Zhang, Yimin; Mora, Miguel A.; Zhang, Xiaowei

    2016-01-01

    Reintroduction of the threatened red-crowned crane has been unsuccessful. Although gut microbiota correlates with host health, there is little information on gut microbiota of cranes under different conservation strategies. The study examined effects of captivity, artificial breeding and life stage on gut microbiota of red-crown cranes. The gut microbiotas of wild, captive adolescent, captive adult, artificially bred adolescent and artificially bred adult cranes were characterized by next-generation sequencing of 16S rRNA gene amplicons. The gut microbiotas were dominated by three phyla: Firmicutes (62.9%), Proteobacteria (29.9%) and Fusobacteria (9.6%). Bacilli dominated the ‘core’ community consisting of 198 operational taxonomic units (OTUs). Both captivity and artificial breeding influenced the structures and diversities microbiota of the gut. Especially, wild cranes had distinct compositions of gut microbiota from captive and artificially bred cranes. The greatest alpha diversity was found in captive cranes, while wild cranes had the least. According to the results of ordination analysis, influences of captivity and artificial breeding were greater than that of life stage. Overall, captivity and artificial breeding influenced the gut microbiota, potentially due to changes in diet, vaccination, antibiotics and living conditions. Metagenomics can serve as a supplementary non-invasive screening tool for disease control. PMID:27628212

  6. Effects of captivity and artificial breeding on microbiota in feces of the red-crowned crane (Grus japonensis).

    PubMed

    Xie, Yuwei; Xia, Pu; Wang, Hui; Yu, Hongxia; Giesy, John P; Zhang, Yimin; Mora, Miguel A; Zhang, Xiaowei

    2016-09-15

    Reintroduction of the threatened red-crowned crane has been unsuccessful. Although gut microbiota correlates with host health, there is little information on gut microbiota of cranes under different conservation strategies. The study examined effects of captivity, artificial breeding and life stage on gut microbiota of red-crown cranes. The gut microbiotas of wild, captive adolescent, captive adult, artificially bred adolescent and artificially bred adult cranes were characterized by next-generation sequencing of 16S rRNA gene amplicons. The gut microbiotas were dominated by three phyla: Firmicutes (62.9%), Proteobacteria (29.9%) and Fusobacteria (9.6%). Bacilli dominated the 'core' community consisting of 198 operational taxonomic units (OTUs). Both captivity and artificial breeding influenced the structures and diversities microbiota of the gut. Especially, wild cranes had distinct compositions of gut microbiota from captive and artificially bred cranes. The greatest alpha diversity was found in captive cranes, while wild cranes had the least. According to the results of ordination analysis, influences of captivity and artificial breeding were greater than that of life stage. Overall, captivity and artificial breeding influenced the gut microbiota, potentially due to changes in diet, vaccination, antibiotics and living conditions. Metagenomics can serve as a supplementary non-invasive screening tool for disease control.

  7. New summer areas and mixing of two greater sandhill crane populations in the Intermountain West

    USGS Publications Warehouse

    Collins, Daniel P.; Grisham, Blake A.; Conring, Courtenay M.; Knetter, Jeffrey M.; Conway, Warren C.; Carleton, Scott A.; Boggie, Matthew A.

    2016-01-01

    Population delineation throughout the annual life cycle for migratory birds is needed to formulate regional and national management and conservation strategies. Despite being well studied continentally, connectivity of sandhill crane Grus canadensis populations throughout the western portion of their North American range remains poorly described. Our objectives were to 1) use global positioning system satellite transmitter terminals to identify summer distributions for the Lower Colorado River Valley Population of greater sandhill cranes Grus canadensis tabida and 2) determine whether intermingling occurs among any of the western greater sandhill crane populations: Rocky Mountain Population, Lower Colorado River Valley Population, and Central Valley Population. Capture and marking occurred during winter and summer on private lands in California and Idaho as well as on two National Wildlife Refuges: Cibola and Sonny Bono Salton Sea National Wildlife Refuges. A majority of marked greater sandhill cranes summered in what is established Lower Colorado River Valley Population breeding areas in northeastern Nevada and southwestern Idaho. A handful of greater sandhill cranes summered outside of traditional breeding areas in west-central Idaho around Cascade Reservoir near Donnelly and Cascade, Idaho. For example, a greater sandhill crane colt captured near Donnelly in July 2014 survived to winter migration and moved south to areas associated with the Rocky Mountain Population. The integration of the greater sandhill crane colt captured near Donnelly provides the first evidence of potential intermingling between the Lower Colorado River Population and Rocky Mountain Population. We suggest continued marking and banding efforts of all three western populations of greater sandhill cranes will accurately delineate population boundaries and connectivity and inform management decisions for the three populations.

  8. 30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What requirements must I follow for cranes and... Performance Standards § 250.108 What requirements must I follow for cranes and other material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance with American...

  9. 29 CFR 1926.550 - Cranes and derricks.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... design or worksite conditions. (3) Cranes and derricks—(i) Operational criteria. (A) Hoisting of the... platform; and (D) The hoisting system shall be inspected if the load rope is slack to ensure all ropes are...

  10. Stability Assessment as a Criterion of Stabilization of the Movement Trajectory of Mobile Crane Working Elements

    NASA Astrophysics Data System (ADS)

    Kacalak, W.; Budniak, Z.; Majewski, M.

    2018-02-01

    The article presents a stability assessment method of the mobile crane handling system based on the safety indicator values that were accepted as the trajectory optimization criterion. With the use of the mathematical model built and the model built in the integrated CAD/CAE environment, analyses were conducted of the displacements of the mass centre of the crane system, reactions of the outrigger system, stabilizing and overturning torques that act on the crane as well as the safety indicator values for the given movement trajectories of the crane working elements.

  11. Effect of MLC leaf position, collimator rotation angle, and gantry rotation angle errors on intensity-modulated radiotherapy plans for nasopharyngeal carcinoma

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bai, Sen; Li, Guangjun; Wang, Maojie

    The purpose of this study was to investigate the effect of multileaf collimator (MLC) leaf position, collimator rotation angle, and accelerator gantry rotation angle errors on intensity-modulated radiotherapy plans for nasopharyngeal carcinoma. To compare dosimetric differences between the simulating plans and the clinical plans with evaluation parameters, 6 patients with nasopharyngeal carcinoma were selected for simulation of systematic and random MLC leaf position errors, collimator rotation angle errors, and accelerator gantry rotation angle errors. There was a high sensitivity to dose distribution for systematic MLC leaf position errors in response to field size. When the systematic MLC position errors weremore » 0.5, 1, and 2 mm, respectively, the maximum values of the mean dose deviation, observed in parotid glands, were 4.63%, 8.69%, and 18.32%, respectively. The dosimetric effect was comparatively small for systematic MLC shift errors. For random MLC errors up to 2 mm and collimator and gantry rotation angle errors up to 0.5°, the dosimetric effect was negligible. We suggest that quality control be regularly conducted for MLC leaves, so as to ensure that systematic MLC leaf position errors are within 0.5 mm. Because the dosimetric effect of 0.5° collimator and gantry rotation angle errors is negligible, it can be concluded that setting a proper threshold for allowed errors of collimator and gantry rotation angle may increase treatment efficacy and reduce treatment time.« less

  12. Reducing 4DCBCT imaging time and dose: the first implementation of variable gantry speed 4DCBCT on a linear accelerator

    NASA Astrophysics Data System (ADS)

    O'Brien, Ricky T.; Stankovic, Uros; Sonke, Jan-Jakob; Keall, Paul J.

    2017-06-01

    Four dimensional cone beam computed tomography (4DCBCT) uses a constant gantry speed and imaging frequency that are independent of the patient’s breathing rate. Using a technique called respiratory motion guided 4DCBCT (RMG-4DCBCT), we have previously demonstrated that by varying the gantry speed and imaging frequency, in response to changes in the patient’s real-time respiratory signal, the imaging dose can be reduced by 50-70%. RMG-4DCBCT optimally computes a patient specific gantry trajectory to eliminate streaking artefacts and projection clustering that is inherent in 4DCBCT imaging. The gantry trajectory is continuously updated as projection data is acquired and the patient’s breathing changes. The aim of this study was to realise RMG-4DCBCT for the first time on a linear accelerator. To change the gantry speed in real-time a potentiometer under microcontroller control was used to adjust the current supplied to an Elekta Synergy’s gantry motor. A real-time feedback loop was developed on the microcontroller to modulate the gantry speed and projection acquisition in response to the real-time respiratory signal so that either 40, RMG-4DCBCT40, or 60, RMG-4DCBCT60, uniformly spaced projections were acquired in 10 phase bins. Images of the CIRS dynamic Thorax phantom were acquired with sinusoidal breathing periods ranging from 2 s to 8 s together with two breathing traces from lung cancer patients. Image quality was assessed using the contrast to noise ratio (CNR) and edge response width (ERW). For the average patient, with a 3.8 s breathing period, the imaging time and image dose were reduced by 37% and 70% respectively. Across all respiratory rates, RMG-4DCBCT40 had a CNR in the range of 6.5 to 7.5, and RMG-4DCBCT60 had a CNR between 8.7 and 9.7, indicating that RMG-4DCBCT allows consistent and controllable CNR. In comparison, the CNR for conventional 4DCBCT drops from 20.4 to 6.2 as the breathing rate increases from 2 s to 8 s. With RMG-4DCBCT

  13. [Population and distribution of the Siberian crane (Grus leucogeranus) wintering in the Poyang lakes over the past decade].

    PubMed

    Shan, Ji-Hong; Ma, Jian-Zhang; Li, Yan-Kuo; Qian, Fa-Wen; Tu, Xiao-Bin

    2012-08-01

    Using simultaneous land surveys, we monitored the population size and spatial distribution of wintering Siberian cranes at 64 lakes around Poyang Lake between 1998 and 2010. The results showed that 46 lakes were inhabited by wintering cranes, and in 25 of those, the number of wintering cranes accounted for more than 1% of the Siberian cranes' global population. The lakes where over 40.0% of the global population, e.g. 1 280 individuals, included Dachahu Lake in Jiujiang region, and Banghu Lake and Candouhu Lake in the Poyang Lake Nature Reserve. The average yearly population of the wintering Siberian crane in the Poyang lakes was 3 108±849, with the maximum of 4 004 individuals in winter 2002. On the whole, there was no drastic fluctuation, but population numbers have shown considerable fluctuation since 2003. We also found the Poyang Lake Nature Reserve was the major wintering area of the Siberian crane, with over 60% of Siberian cranes wintering in the reserve since 2002 (except in 2006). Most of the inhabited lakes are covered in existing nature reserves, though some lakes outside the reserve were also considerably used by Siberian cranes.

  14. Study of the magnets used for a mobile isocenter carbon ion gantry.

    PubMed

    Moreno, Jhonnatan Osorio; Pullia, Marco G; Priano, Cristiana; Lante, Valeria; Necchi, Monica M; Savazzi, Simone

    2013-07-01

    A conceptual design of a mobile isocenter carbon ion gantry was carried out in the framework of the Particle Training Network for European Radiotherapy (PARTNER) and Union of Light Ion Centres in Europe (ULICE) projects. To validate the magnets used in this gantry, Finite Element Method (FEM) simulations were performed with COMSOL multiphysics; the purpose was to evaluate the magnetic field quality and the influence of additional support structures for correctors, 90° bending dipole and quadrupoles, both in dynamic and static regimes. Due to the low ramp rates, the dynamic effects do not disturb the homogeneity and the magnetic field level. The differences between the stationary field and the corresponding dynamic field after the end of the ramps are in the order of 10(-4); it implies that the magnets can be operated without significant field lag at the nominal ramp rate. However, even in static regime the magnetic length of corrector magnet decreases by 5% when the rotator mechanical structure is considered. The simulations suggest an optimization phase of the correctors in the rotator.

  15. Study of the magnets used for a mobile isocenter carbon ion gantry

    PubMed Central

    Moreno, Jhonnatan Osorio; Pullia, Marco G.; Priano, Cristiana; Lante, Valeria; Necchi, Monica M.; Savazzi, Simone

    2013-01-01

    A conceptual design of a mobile isocenter carbon ion gantry was carried out in the framework of the Particle Training Network for European Radiotherapy (PARTNER) and Union of Light Ion Centres in Europe (ULICE) projects. To validate the magnets used in this gantry, Finite Element Method (FEM) simulations were performed with COMSOL multiphysics; the purpose was to evaluate the magnetic field quality and the influence of additional support structures for correctors, 90° bending dipole and quadrupoles, both in dynamic and static regimes. Due to the low ramp rates, the dynamic effects do not disturb the homogeneity and the magnetic field level. The differences between the stationary field and the corresponding dynamic field after the end of the ramps are in the order of 10–4; it implies that the magnets can be operated without significant field lag at the nominal ramp rate. However, even in static regime the magnetic length of corrector magnet decreases by 5% when the rotator mechanical structure is considered. The simulations suggest an optimization phase of the correctors in the rotator. PMID:23824120

  16. Suitability of Coastal Marshes as Whooping Crane Foraging Habitat in Southwest Louisiana, USA

    USGS Publications Warehouse

    King, Sammy L.; Kang, Sung-Ryong

    2014-01-01

    Foraging habitat conditions (i.e., water depth, prey biomass, digestible energy density) can be a significant predictor of foraging habitat selection by wading birds. Potential foraging habitats of Whooping Cranes (Grus americana) using marshes include ponds and emergent marsh, but the potential prey and energy availability in these habitat types have rarely been studied. In this study, we estimated daily digestible energy density for Whooping Cranes in different marsh and microhabitat types (i.e., pond, flooded emergent marsh). Also, indicator metrics of foraging habitat suitability for Whooping Cranes were developed based on seasonal water depth, prey biomass, and digestible energy density. Seasonal water depth (cm), prey biomass (g wet weight m-2), and digestible energy density (kcal g-1m-2) ranged from 0.0 to 50.2 ± 2.8, 0.0 to 44.8 ± 22.3, and 0.0 to 31.0 ± 15.3, respectively. With the exception of freshwater emergent marsh in summer, all available habitats were capable of supporting one Whooping Crane per 0.1 ha per day. All habitat types in the marshes had relatively higher suitability in spring and summer than in fall and winter. Our study indicates that based on general energy availability, freshwater marshes in the region can support Whooping Cranes in a relatively small area, particularly in spring and summer. In actuality, the spatial density of ponds, the flood depth of the emergent marsh, and the habitat conditions (e.g., vegetation density) between adjacent suitable habitats will constrain suitable habitat and Whooping Crane numbers.

  17. An occurrence of salmonella infection in cranes at the Izumi Plains, Japan.

    PubMed

    Maeda, Y; Tohya, Y; Nakagami, Y; Yamashita, M; Sugimura, T

    2001-08-01

    Ten thousand or more cranes migrate from Siberia and stay at the Izumi Plains, in the northern part of Kagoshima prefecture, Japan, every winter season. Four hundred and twenty samples of cranes feces were obtained 1995 to 1997 and investigated for Salmonella. As a result, twenty-nine of Salmonella strains were isolated. All isolates were determined to be identical, Salmonella Typhimurium (04:i: 1,2). since all of them indicated the same patterns of plasmid profiling and antibiotic sensitive spectrums. The isolates showed a high pathogenicity to chicken, and most of them were isolated in the latter half of the winter season; therefore the cranes were infected with the isolates during the winter season.

  18. 76 FR 55893 - Crane & Company; Notice of Application Accepted for Filing With the Commission, Intent To Waive...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-09

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13583-001] Crane & Company.... Date filed: March 9, 2011. d. Applicant: Crane & Company. e. Name of Project: Byron Weston... new 100-foot-long, 600-volt transmission line connected to the Crane & Company mill complex. The...

  19. Load Weight Classification of The Quayside Container Crane Based On K-Means Clustering Algorithm

    NASA Astrophysics Data System (ADS)

    Zhang, Bingqian; Hu, Xiong; Tang, Gang; Wang, Yide

    2017-07-01

    The precise knowledge of the load weight of each operation of the quayside container crane is important for accurately assessing the service life of the crane. The load weight is directly related to the vibration intensity. Through the study on the vibration of the hoist motor of the crane in radial and axial directions, we can classify the load using K-means clustering algorithm and quantitative statistical analysis. Vibration in radial direction is significantly and positively correlated with that in axial direction by correlation analysis, which means that we can use the data only in one of the directions to carry out the study improving then the efficiency without degrading the accuracy of load classification. The proposed method can well represent the real-time working condition of the crane.

  20. Slew Cranes in Shipyards: A Study

    DTIC Science & Technology

    1985-01-01

    yard in Germany and one in Malaysia , carried out the corrosion preventive shot blasting and repainting recommended by the manufacturers. The general...the guidance of Osha (USA) or VBG-9 (W. Germany) — it is up to. the operator, however, to use the crane safely. In ensuring operator safety, an owner

  1. 75 FR 20005 - Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-16

    ...] Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget's (OMB... Crawler, Locomotive, and Truck Cranes Standard (29 CFR 1910.180). DATES: Comments must be submitted... of each of these requirements is to prevent workers from using unsafe cranes and ropes, thereby...

  2. Diseases of whooping cranes seen during annual migration of the Rocky Mountain flock

    USGS Publications Warehouse

    Snyder, S. Bret; Richard, Michael J.; Drewien, Roderick C.; Thomas, Nancy J.; Thilsted, John P.; Junge, Randall E.

    1991-01-01

    Diagnosis and treatment of ill whooping cranes of the Rocky Mountain flock was provided by a zoological facility. Cases of avian cholera, lead poisoning and avian tuberculosis were encountered. The zoo efforts were an adjunct to the U.S. Fish and Wildlife Service, Whooping Crane Recovery Plan.

  3. A reliability analysis framework with Monte Carlo simulation for weld structure of crane's beam

    NASA Astrophysics Data System (ADS)

    Wang, Kefei; Xu, Hongwei; Qu, Fuzheng; Wang, Xin; Shi, Yanjun

    2018-04-01

    The reliability of the crane product in engineering is the core competitiveness of the product. This paper used Monte Carlo method analyzed the reliability of the weld metal structure of the bridge crane whose limit state function is mathematical expression. Then we obtained the minimum reliable welding feet height value for the welds between cover plate and web plate on main beam in different coefficients of variation. This paper provides a new idea and reference for the growth of the inherent reliability of crane.

  4. Monte Carlo simulation of portal dosimetry on a rectilinear voxel geometry: a variable gantry angle solution.

    PubMed

    Chin, P W; Spezi, E; Lewis, D G

    2003-08-21

    A software solution has been developed to carry out Monte Carlo simulations of portal dosimetry using the BEAMnrc/DOSXYZnrc code at oblique gantry angles. The solution is based on an integrated phantom, whereby the effect of incident beam obliquity was included using geometric transformations. Geometric transformations are accurate within +/- 1 mm and +/- 1 degrees with respect to exact values calculated using trigonometry. An application in portal image prediction of an inhomogeneous phantom demonstrated good agreement with measured data, where the root-mean-square of the difference was under 2% within the field. Thus, we achieved a dose model framework capable of handling arbitrary gantry angles, voxel-by-voxel phantom description and realistic particle transport throughout the geometry.

  5. A two cable, six link boom crane for lunar construction

    NASA Technical Reports Server (NTRS)

    Taylor, Robert M.; Mikulas, Martin M., Jr.; Hedgepeth, John M.

    1993-01-01

    This paper presents the conceptual design and analysis of a modified crane boom and cable suspension which provide contro1 over all six degrees of freedom of a payload. Two cables pass around pulleys to form six links between the payload and boom. A linearization of the pulley mechanics was derived to create finite element models of the system. The models were experimentally verified and used to explore variations of the suspension geometry. Several crane concepts which use the suspension are discussed and illustrated.

  6. A novel verification method using a plastic scintillator imagining system for assessment of gantry sag in radiotherapy.

    PubMed

    Tsuneda, Masato; Nishio, Teiji; Saito, Akito; Tanaka, Sodai; Suzuki, Tatsuhiko; Kawahara, Daisuke; Matsushita, Keiichiro; Nishio, Aya; Ozawa, Shuichi; Karasawa, Kumiko; Nagata, Yasushi

    2018-06-01

    High accuracy of the beam-irradiated position is required for high-precision radiation therapy such as stereotactic body radiation therapy (SBRT), volumetric modulated arc therapy (VMAT), and intensity modulated radiation therapy (IMRT). Users generally perform the verification of the mechanical and radiation isocenters using the star shot test and the Winston Lutz test that allow evaluation of the displacement at the isocenter. However, these methods are unable to evaluate directly and quantitatively the sagging angle that is caused by the weight of the gantry itself along the gantry rotation axis. In addition, the verification of the central axis of the irradiated beam that is not dependent at the isocenter is needed for the mechanical quality assurance of a nonisocentric irradiation technique. In this study, we have developed a prototype system for the verification of three-dimensional (3D) beam alignment and we have verified the system concept for 3D isocentricity. Our system allows detection of the central axis in 3D coordinates and evaluation of the irradiated oblique angle to the gantry rotation axis, i.e., the sagging angle. In order to measure the central axis of the irradiated beam in 3D coordinates, we constructed the prototype verification system consisting of a column-shaped plastic scintillator (CoPS), a truncated cone-shaped mirror (TCsM), and a cooled charged-coupled device (CCD) camera. This verification system was irradiated with 6-MV photon beams and the scintillation light was measured using the CCD camera. The central axis on the axial plane (two-dimensional (2D) central axis) was acquired from the integration of the scintillation light along the major axis of the CoPS, and the central axis in 3D coordinates (3D central axis) was acquired from two curve-shaped profiles which were reflected by the TCsM. We verified the calculation accuracy of the gantry rotation axis, θ z . Additionally, we calculated the 3D central axis and the sagging angle

  7. Are whooping cranes destined for extinction? Climate change imperils recruitment and population growth.

    PubMed

    Butler, Matthew J; Metzger, Kristine L; Harris, Grant M

    2017-04-01

    Identifying climatic drivers of an animal population's vital rates and locating where they operate steers conservation efforts to optimize species recovery. The population growth of endangered whooping cranes ( Grus americana ) hinges on juvenile recruitment. Therefore, we identify climatic drivers (solar activity [sunspots] and weather) of whooping crane recruitment throughout the species' life cycle (breeding, migration, wintering). Our method uses a repeated cross-validated absolute shrinkage and selection operator approach to identify drivers of recruitment. We model effects of climate change on those drivers to predict whooping crane population growth given alternative scenarios of climate change and solar activity. Years with fewer sunspots indicated greater recruitment. Increased precipitation during autumn migration signified less recruitment. On the breeding grounds, fewer days below freezing during winter and more precipitation during breeding suggested less recruitment. We predicted whooping crane recruitment and population growth may fall below long-term averages during all solar cycles when atmospheric CO 2 concentration increases, as expected, to 500 ppm by 2050. Species recovery during a typical solar cycle with 500 ppm may require eight times longer than conditions without climate change and the chance of population decline increases to 31%. Although this whooping crane population is growing and may appear secure, long-term threats imposed by climate change and increased solar activity may jeopardize its persistence. Weather on the breeding grounds likely affects recruitment through hydrological processes and predation risk, whereas precipitation during autumn migration may influence juvenile mortality. Mitigating threats or abating climate change should occur within ≈30 years or this wild population of whooping cranes may begin declining.

  8. Customized overhead cranes for installation of India's largest 3.6m optical telescope at Devasthal, Nainital, India

    NASA Astrophysics Data System (ADS)

    Bangia, Tarun; Yadava, Shobhit; Kumar, Brijesh; Ghanti, A. S.; Hardikar, P. M.

    2016-07-01

    India's largest 3.6 m aperture optical telescope facility has been recently established at Devasthal site by Aryabhatta Research Institute of Observation Sciences (ARIES), an autonomous Institute under Department of Science and Technology, Government of India. The telescope is equipped with active optics and it is designed to be used for seeinglimited observations at visible and near-infrared wavelengths. A steel building with rotating cylindrical steel Dome was erected to house 3.6m telescope and its accessories at hilltop of Devasthal site. Customized cranes were essentially required inside the building as there were space constraints around the telescope building for operating big external heavy duty cranes from outside, transportation constraints in route for bringing heavy weight cranes, altitude of observatory, and sharp bends etc. to site. To meet the challenge of telescope installation from inside the telescope building by lifting components through its hatch, two Single Girder cranes and two Under Slung cranes of 10 MT capacity each were specifically designed and developed. All the four overhead cranes were custom built to achieve the goal of handling telescope mirror and its various components during installation and assembly. Overhead cranes were installed in limited available space inside the building and tested as per IS 3177. Cranes were equipped with many features like VVVFD compatibility, provision for tandem operation, digital load display, anti-collision mechanism, electrical interlocks, radio remote, low hook height and compact carriage etc. for telescope integration at site.

  9. Naval Surface Warfare Center Crane Contracts Awarded Without Competition Were Adequately Justified

    DTIC Science & Technology

    2012-04-24

    Processed Data 13 Use of Technical Assistance 14 Prior Coverage 14 B. Federal Acquisition Regulation Criteria...are operating as intended and to evaluate the effectiveness of the controls. NSWC Crane’s internal controls over their processes for issuing the...consider the problem to be systemic and are not making a recommendation. Processes at NSWC Crane Facilitate Market Research Efforts NSWC Crane

  10. Whooping crane stopover site use intensity within the Great Plains

    USGS Publications Warehouse

    Pearse, Aaron T.; Brandt, David A.; Harrell, Wade C.; Metzger, Kristine L.; Baasch, David M.; Hefley, Trevor J.

    2015-09-23

    Whooping cranes (Grus americana) of the Aransas-Wood Buffalo population migrate twice each year through the Great Plains in North America. Recovery activities for this endangered species include providing adequate places to stop and rest during migration, which are generally referred to as stopover sites. To assist in recovery efforts, initial estimates of stopover site use intensity are presented, which provide opportunity to identify areas across the migration range used more intensively by whooping cranes. We used location data acquired from 58 unique individuals fitted with platform transmitting terminals that collected global position system locations. Radio-tagged birds provided 2,158 stopover sites over 10 migrations and 5 years (2010–14). Using a grid-based approach, we identified 1,095 20-square-kilometer grid cells that contained stopover sites. We categorized occupied grid cells based on density of stopover sites and the amount of time cranes spent in the area. This assessment resulted in four categories of stopover site use: unoccupied, low intensity, core intensity, and extended-use core intensity. Although provisional, this evaluation of stopover site use intensity offers the U.S. Fish and Wildlife Service and partners a tool to identify landscapes that may be of greater conservation significance to migrating whooping cranes. Initially, the tool will be used by the U.S. Fish and Wildlife Service and other interested parties in evaluating the Great Plains Wind Energy Habitat Conservation Plan.

  11. Spherical Pendulum Small Oscillations for Slewing Crane Motion

    PubMed Central

    Perig, Alexander V.; Stadnik, Alexander N.; Deriglazov, Alexander I.

    2014-01-01

    The present paper focuses on the Lagrange mechanics-based description of small oscillations of a spherical pendulum with a uniformly rotating suspension center. The analytical solution of the natural frequencies' problem has been derived for the case of uniform rotation of a crane boom. The payload paths have been found in the inertial reference frame fixed on earth and in the noninertial reference frame, which is connected with the rotating crane boom. The numerical amplitude-frequency characteristics of the relative payload motion have been found. The mechanical interpretation of the terms in Lagrange equations has been outlined. The analytical expression and numerical estimation for cable tension force have been proposed. The numerical computational results, which correlate very accurately with the experimental observations, have been shown. PMID:24526891

  12. The relationship of blue crab abundance to winter mortality of Whooping Cranes

    USGS Publications Warehouse

    Pugesek, Bruce H.; Baldwin, Michael J.; Stehn, Thomas

    2013-01-01

    We sampled blue crab (Callinectes sapidus) numbers in marshes on the Aransas National Wildlife Refuge, Texas from 1998-2006, while simultaneously censusing the wintering population of Whooping Cranes (Grus americana) on the refuge and surrounding habitats. This was done to determine whether mortality of wintering Whooping Cranes was related to the availability of this food source. Yearly variation in crab numbers was high, ranging from a low of 0.1 crabs to a high of 3.4 crabs per 100-m transect section. Significant non-linear increases in both juvenile and adult mortality in relation to decreasing crab abundance was observed. Results suggest that some threshold of crab abundance exists in which Whooping Cranes have higher survival on their wintering grounds.

  13. A structurally adaptive space crane concept for assembling space systems on orbit

    NASA Technical Reports Server (NTRS)

    Dorsey, John T.; Sutter, Thomas R.; Wu, K. C.

    1992-01-01

    A space crane concept is presented which is based on erectable truss hardware to achieve high stiffness and low mass booms and articulating-truss joints which can be assembled on orbit. The hardware is characterized by linear load-deflection response and is structurally predictable. The crane can be reconfigured into different geometries to meet future assembly requirements. Articulating-truss joint concepts with significantly different geometries are analyzed and found to have similar static and dynamic performance, which indicates that criteria other than structural and kinematic performance can be used to select a joint. Passive damping and an open-loop preshaped command input technique greatly enhance the structural damping in the space crane and may preclude the need for an active vibrations suppression system.

  14. Remembering Dick Crane

    NASA Astrophysics Data System (ADS)

    Jossem, E. Leonard

    2007-09-01

    Physicist, polymath, educator, leader, Horace Richard Crane died on April 19, 2007, a few months short of his 100th birthday. Those of us who were fortunate enough to have had him as a friend mourn his loss, but for all of us he leaves a rich and varied legacy of published works that invite reading and rereading. Dick's work as a physicist was recognized in 1966 by his election to the National Academy of Sciences and in 1986 by the award of the President's National Medal of Science: "For the first measurement of the magnetic moment and spin of free electrons and positrons."

  15. Case report: inclusion body disease of cranes: a serological follow-up to the 1978 die-off

    USGS Publications Warehouse

    Docherty, D.E.; Romaine, Renee I.

    1983-01-01

    A herpesvirus was isolated from captive cranes involved in a 1978 die-off. Neutralizing antibody to this virus was detected in this captive population as early as 1975 and consistently thereafter through 1979. Exposure to the virus evidently occurred at least 2 1/2 years before the die-off, without causing any mortality diagnosed as being caused by inclusion body disease of cranes (IBDC). Overcrowding and environmental conditions in 1978 may have contributed to the deaths of certain species of cranes in one area and not in another. Mortality ratios and serological data suggest that crane species vary in their response to IBDC virus.

  16. Evaluation of the major histocompatibility complex (Mhc) in cranes: applications to conservation efforts

    USGS Publications Warehouse

    Jarvi, S.I.; Miller, M.M.; Goto, R.M.; Gee, G.F.; Briles, W.E.

    2001-01-01

    Although there have been heated discussions concerning the relative importance of using Mhc diversity as a basis for selecting breeders in conservation projects, most parties agree that the genetic variability residual in an endangered species should be maintained through genetic management, if at all possible. Substantial evidence exists (particularly in birds) documenting the influences of specific Mhc haplotypes on disease outcome and also that those individuals which are heterozygous for Mhc alleles appear to have an advantage for survival over those that are homozygous. Thus, conservation of genetic variability of the Mhc is likely important for the preservation of fitness, especially in small breeding populations. More than half of the world's crane species are listed as endangered. Members of all 15 known species are represented among breeding animals for captive propagation at the International Crane Foundation (Wisconsin) and the USGS Patuxent Wildlife Research Center (Maryland). Collaborative multi-organization efforts and the availability of extensive pedigree records have allowed the study of Mhc variability in several species of cranes. We have found, for example, that Mhc diversity in the captive Florida sandhill crane (Grus canadensis pratensis) population appears high, whereas in the captive whooping crane (Grus americana), which has undergone a severe 'genetic bottleneck,? both the number of alleles and the levels of heterozygosity appear to be substantially reduced.

  17. Aspergillosis in a red-crowned crane

    USGS Publications Warehouse

    Stroud, R.K.; Duncan, R.M.

    1983-01-01

    An unusual form of pulmonary aspergillosis in a red-crowned crane (Grus japonensis) is described in this report. The major lesion is unique because it closely resembles a lesion referred to as an aspergilloma. An aspergilloma is a single large granulomatous lesion that resembles a tumor and is caused by fungi of the genus Aspergillus.

  18. Whooping crane recovery: Progress through research

    USGS Publications Warehouse

    Carpenter, J.W.; Smith, D.G.

    1988-01-01

    Cooperative efforts of the Canadian Wildlife Service (CWS), U.S. Fish and Wildlife Service (FWS), Wood Buffalo National Park in Canada, and Patuxent Wildlife Research Center have established a captive flock of whooping cranes, and at least two additional wild populations. Efforts have focused on research, habitat protection, law enforcement, and conservation education programs.

  19. The "Crane Problem" in Journalism Historiography.

    ERIC Educational Resources Information Center

    Marmarelli, Ron

    Attempting to correct and amplify the portrayal of Stephen Crane in journalism history, this paper provides an analysis of relevant works in journalism and other disciplines in order to point out the weaknesses in the journalism historiography and to show how they apparently came about. Evidence is presented from the literature of journalism,…

  20. Design of a spreader bar crane-mounted gamma-ray radiation detection system

    NASA Astrophysics Data System (ADS)

    Grypp, Matthew D.; Marianno, Craig M.; Poston, John W.; Hearn, Gentry C.

    2014-04-01

    Over 95% of imports entering the United States from outside North America arrive by sea at 329 ports of entry. These imports are packaged in more than 11 million cargo containers. Radiation portals monitors routinely scan cargo containers leaving port on specially-designed trucks. To accelerate the process, some commercial entities have placed detection systems on the spreader-bar cranes (SBCs) used to offload. Little is known about the radiation background profiles of systems operating on these cranes. To better understand the operational characteristics of these radiation detection systems; a research team from Texas A&M University (TAMU) mounted three thallium-doped sodium iodide [NaI(Tl)] detectors on an SBC at the Domestic Nuclear Detection Office's (DNDO) test track facility at the Port of Tacoma (PoT). These detectors were used to monitor background radiation levels and continuously recorded data during crane operations using a custom-built software package. Count rates and spectral data were recorded for various crane heights over both land and water. The results of this research created a background profile in which count rate was heavily dependent on position demonstrating how detector readings changed in the operational environment.

  1. Reassessment of the Necessity of the Proton Gantry: Analysis of Beam Orientations From 4332 Treatments at the Massachusetts General Hospital Proton Center Over the Past 10 Years

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yan, Susu, E-mail: syan5@mgh.harvard.edu; Lu, Hsiao-Ming; Flanz, Jay

    2016-05-01

    Purpose: To retrospectively analyze the beam approaches used in gantry-based proton treatments, and to reassess the practical advantages of the gantry, compared with beam approaches that are achievable without a gantry, in the context of present-day technology. Methods and Materials: We reviewed the proton therapy plans of 4332 patients treated on gantries at our hospital, delivered by the double scattering technique (n=4228) and, more recently, pencil beam scanning (PBS) (n=104). Beam approaches, relative to the patient frame, were analyzed individually to identify cases that could be treated without a gantry. Three treatment configurations were considered, with the patient in lying position,more » sitting position, or both. The FIXED geometry includes a fixed horizontal portal. The BEND geometry enables a limited vertical inflection of the beam by up to 20°. The MOVE geometry allows for flexibility of the patient head and body setup. Results: The percentage of patients with head and neck tumors that could be treated without a gantry using double scattering was 44% in FIXED, 70% in 20° BEND, and 100% in 90° MOVE. For torso regions, 99% of patients could be treated in 20° BEND. Of 104 PBS treatments, all but 1 could be reproduced with FIXED geometry. The only exception would require a 10° BEND capability. Note here that the PBS treatments were applied to select anatomic sites, including only 2 patients with skull-base tumors. Conclusions: The majority of practical beam approaches can be realized with gantry-less delivery, aided by limited beam bending and patient movements. Practical limitations of the MOVE geometry, and treatments requiring a combination of lying and sitting positions, may lower the percentage of head and neck patients who could be treated without a gantry. Further investigation into planning, immobilization, and imaging is needed to remove the practical limitations and to facilitate proton treatment without a gantry.« less

  2. Disseminated visceral coccidiosis in Eurasian cranes (Grus grus) in the UK.

    PubMed

    O'Brien, M F; Brown, M J; Stidworthy, M F; Peirce, M A; Marshall, R N; Honma, H; Nakai, Y

    2011-02-26

    Clinical disease and mortalities due to disseminated visceral coccidiosis were identified for the first time in a group of captive juvenile Eurasian cranes (Grus grus) in the UK during 2008. Presumptive diagnosis was made from the finding of granulomatous nodules in the liver, spleen and other organs at gross postmortem examination, and confirmed histologically by the presence of intracellular coccidial stages within lesions. The species of coccidian was determined to be Eimeria reichenowi on the basis of faecal oocyst morphology and sequencing of 18S rDNA by PCR. A further outbreak of clinical disease occurred in the same enclosure in 2009, affecting a new group of juvenile Eurasian cranes and demoiselle cranes (Anthropoides virgo) and indicating the persistence of infective oocysts in the environment. Clinical sampling of birds during both years demonstrated positive results from examination of both faecal samples and peripheral blood smears.

  3. A light-weight compact proton gantry design with a novel dose delivery system for broad-energetic laser-accelerated beams

    NASA Astrophysics Data System (ADS)

    Masood, U.; Cowan, T. E.; Enghardt, W.; Hofmann, K. M.; Karsch, L.; Kroll, F.; Schramm, U.; Wilkens, J. J.; Pawelke, J.

    2017-07-01

    Proton beams may provide superior dose-conformity in radiation therapy. However, the large sizes and costs limit the widespread use of proton therapy (PT). The recent progress in proton acceleration via high-power laser systems has made it a compelling alternative to conventional accelerators, as it could potentially reduce the overall size and cost of the PT facilities. However, the laser-accelerated beams exhibit different characteristics than conventionally accelerated beams, i.e. very intense proton bunches with large divergences and broad-energy spectra. For the application of laser-driven beams in PT, new solutions for beam transport, such as beam capture, integrated energy selection, beam shaping and delivery systems are required due to the specific beam parameters. The generation of these beams are limited by the low repetition rate of high-power lasers and this limitation would require alternative solutions for tumour irradiation which can efficiently utilize the available high proton fluence and broad-energy spectra per proton bunch to keep treatment times short. This demands new dose delivery system and irradiation field formation schemes. In this paper, we present a multi-functional light-weight and compact proton gantry design for laser-driven sources based on iron-less pulsed high-field magnets. This achromatic design includes improved beam capturing and energy selection systems, with a novel beam shaping and dose delivery system, so-called ELPIS. ELPIS system utilizes magnetic fields, instead of physical scatterers, for broadening the spot-size of broad-energetic beams while capable of simultaneously scanning them in lateral directions. To investigate the clinical feasibility of this gantry design, we conducted a treatment planning study with a 3D treatment planning system augmented for the pulsed beams with optimizable broad-energetic widths and selectable beam spot sizes. High quality treatment plans could be achieved with such unconventional beam

  4. A light-weight compact proton gantry design with a novel dose delivery system for broad-energetic laser-accelerated beams.

    PubMed

    Masood, U; Cowan, T E; Enghardt, W; Hofmann, K M; Karsch, L; Kroll, F; Schramm, U; Wilkens, J J; Pawelke, J

    2017-07-07

    Proton beams may provide superior dose-conformity in radiation therapy. However, the large sizes and costs limit the widespread use of proton therapy (PT). The recent progress in proton acceleration via high-power laser systems has made it a compelling alternative to conventional accelerators, as it could potentially reduce the overall size and cost of the PT facilities. However, the laser-accelerated beams exhibit different characteristics than conventionally accelerated beams, i.e. very intense proton bunches with large divergences and broad-energy spectra. For the application of laser-driven beams in PT, new solutions for beam transport, such as beam capture, integrated energy selection, beam shaping and delivery systems are required due to the specific beam parameters. The generation of these beams are limited by the low repetition rate of high-power lasers and this limitation would require alternative solutions for tumour irradiation which can efficiently utilize the available high proton fluence and broad-energy spectra per proton bunch to keep treatment times short. This demands new dose delivery system and irradiation field formation schemes. In this paper, we present a multi-functional light-weight and compact proton gantry design for laser-driven sources based on iron-less pulsed high-field magnets. This achromatic design includes improved beam capturing and energy selection systems, with a novel beam shaping and dose delivery system, so-called ELPIS. ELPIS system utilizes magnetic fields, instead of physical scatterers, for broadening the spot-size of broad-energetic beams while capable of simultaneously scanning them in lateral directions. To investigate the clinical feasibility of this gantry design, we conducted a treatment planning study with a 3D treatment planning system augmented for the pulsed beams with optimizable broad-energetic widths and selectable beam spot sizes. High quality treatment plans could be achieved with such unconventional beam

  5. Testing a ground-based canopy model using the wind river canopy crane

    Treesearch

    Robert Van Pelt; Malcolm P. North

    1999-01-01

    A ground-based canopy model that estimates the volume of occupied space in forest canopies was tested using the Wind River Canopy Crane. A total of 126 trees in a 0.25 ha area were measured from the ground and directly from a gondola suspended from the crane. The trees were located in a low elevation, old-growth forest in the southern Washington Cascades. The ground-...

  6. An energy-optimal solution for transportation control of cranes with double pendulum dynamics: Design and experiments

    NASA Astrophysics Data System (ADS)

    Sun, Ning; Wu, Yiming; Chen, He; Fang, Yongchun

    2018-03-01

    Underactuated cranes play an important role in modern industry. Specifically, in most situations of practical applications, crane systems exhibit significant double pendulum characteristics, which makes the control problem quite challenging. Moreover, most existing planners/controllers obtained with standard methods/techniques for double pendulum cranes cannot minimize the energy consumption when fulfilling the transportation tasks. Therefore, from a practical perspective, this paper proposes an energy-optimal solution for transportation control of double pendulum cranes. By applying the presented approach, the transportation objective, including fast trolley positioning and swing elimination, is achieved with minimized energy consumption, and the residual oscillations are suppressed effectively with all the state constrains being satisfied during the entire transportation process. As far as we know, this is the first energy-optimal solution for transportation control of underactuated double pendulum cranes with various state and control constraints. Hardware experimental results are included to verify the effectiveness of the proposed approach, whose superior performance is reflected by being experimentally compared with some comparative controllers.

  7. Peace Crane Project: An Interdisciplinary Approach.

    ERIC Educational Resources Information Center

    LeBert, Linda L.; Calais, Jerry; Cuevas, Phyllis; Fruge', Hugh; Gardiner, Judy Carter; Larmon, Marilyn; Rees, Jocelyn

    To model collaboration and to "practice what we teach," a group of faculty members at McNeese State University in Louisiana developed a college-wide theme based on the book, "Sadako and the Thousand Paper Cranes." This book was selected because of the importance of seeking and achieving peace in a world that is struggling and,…

  8. Sadako and the Thousand Paper Cranes: The Dialogic Narrative in the Educational Act

    ERIC Educational Resources Information Center

    Al-Jafar, Ali A.

    2016-01-01

    This study used the story of "Sadako and the thousand paper cranes" by Coerr (1977) to discover similarities between the events of August 1945 in Hiroshima and the events of August 1990 in Kuwait. The participants in a children's literature class at Kuwait University folded paper cranes and wrote in their journals to answer two…

  9. 46 CFR 109.527 - Cranes: Operator designation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Cranes: Operator designation. 109.527 Section 109.527 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS... familiar with the provisions of the API Recommended Practice for Operation and Maintenance of Offshore...

  10. 46 CFR 109.527 - Cranes: Operator designation.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Cranes: Operator designation. 109.527 Section 109.527 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS... familiar with the provisions of the API Recommended Practice for Operation and Maintenance of Offshore...

  11. 46 CFR 109.527 - Cranes: Operator designation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cranes: Operator designation. 109.527 Section 109.527 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS... familiar with the provisions of the API Recommended Practice for Operation and Maintenance of Offshore...

  12. 46 CFR 109.527 - Cranes: Operator designation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Cranes: Operator designation. 109.527 Section 109.527 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS... familiar with the provisions of the API Recommended Practice for Operation and Maintenance of Offshore...

  13. 46 CFR 109.527 - Cranes: Operator designation.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Cranes: Operator designation. 109.527 Section 109.527 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS... familiar with the provisions of the API Recommended Practice for Operation and Maintenance of Offshore...

  14. 29 CFR 1926.1501 - Cranes and derricks.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... internal combustion engine powered equipment exhausts in enclosed spaces, tests shall be made and recorded... transmitter shall be de-energized or tests shall be made to determine if electrical charge is induced on the..., or locomotive cranes in use shall meet the applicable requirements for design, inspection...

  15. Detector system dose verification comparisons for arc therapy: couch vs. gantry mount

    PubMed Central

    Manikandan, Arjunan; Nandy, Maitreyee; Sureka, Chandra Sekaran; Gossman, Michael S.; Sujatha, Nadendla; Rajendran, Vivek Thirupathur

    2014-01-01

    The aim of this study was to assess the performance of a gantry‐mounted detector system and a couch set detector system using a systematic multileaf collimator positional error manually introduced for volumetric‐modulated arc therapy. Four head and neck and esophagus VMAT plans were evaluated by measurement using an electronic portal imaging device and an ion chamber array. Each plan was copied and duplicated with a 1 mm systematic MLC positional error in the left leaf bank. Direct comparison of measurements for plans with and without the error permitted observational characteristics for quality assurance performance between detectors. A total of 48 different plans were evaluated for this testing. The mean percentage planar dose differences required to satisfy a 95% match between plans with and without the MLCPE were 5.2% ± 0.5% for the chamber array with gantry motion, 8.12% ± 1.04% for the chamber array with a static gantry at 0°, and 10.9% ± 1.4% for the EPID with gantry motion. It was observed that the EPID was less accurate due to overresponse of the MLCPE in the left leaf bank. The EPID always images bank‐A on the ipsilateral side of the detector, whereas for a chamber array or for a patient, that bank changes as it crosses the ‐90° or +90° position. A couch set detector system can reproduce the TPS calculated values most consistently. We recommend it as the most reliable patient specific QA system for MLC position error testing. This research is highlighted by the finding of up to 12.7% dose variation for H/N and esophagus cases for VMAT delivery, where the mere source of error was the stated clinically acceptability of 1 mm MLC position deviation of TG‐142. PACS numbers: 87.56.‐v, 87.55.‐x, 07.57.KP, 29.40.‐n, 85.25.Pb PMID:24892330

  16. [Book review] Return of the Whooping Crane

    USGS Publications Warehouse

    Ellis, D.H.; Smith, D.G.

    1990-01-01

    Fewer than 40 years ago, Life magazine ran an article decrying the plight of Whooping Cranes (Grus americana) on their wintering grounds at Aransas National Wildlife Refuge (Aransas) along the Gulf Coast. The small flock of approximately 20 birds that summered at Wood Buffalo National Park (Wood Buffalo) in Canada and wintered on the Texas coast at Aransas comprised the entire wild population of the species-a population that at the time seemed to be drifting inexorably to- ward extinction. Today, the Aransas/Wood Buffalo flock numbers more than 140 birds, there are more than 30 birds in captivity at the Patuxent Wildlife Research Center (Patuxent), and another 20-plus birds at the International Crane Foundation in Baraboo, Wisconsin. There are also a dozen wild birds in an experimental flock (termed the Rocky Mountain flock by Doughty) that winters at Bosque Del Apache National Wildlife Refuge (NWR) in New Mexico and summers in the mountain valleys centered on Grays Lake NWR in Idaho.

  17. The Barrett-Crane model: asymptotic measure factor

    NASA Astrophysics Data System (ADS)

    Kamiński, Wojciech; Steinhaus, Sebastian

    2014-04-01

    The original spin foam model construction for 4D gravity by Barrett and Crane suffers from a few troubling issues. In the simple examples of the vertex amplitude they can be summarized as the existence of contributions to the asymptotics from non-geometric configurations. Even restricted to geometric contributions the amplitude is not completely worked out. While the phase is known to be the Regge action, the so-called measure factor has remained mysterious for a decade. In the toy model case of the 6j symbol this measure factor has a nice geometric interpretation of V-1/2 leading to speculations that a similar interpretation should be possible also in the 4D case. In this paper we provide the first geometric interpretation of the geometric part of the asymptotic for the spin foam consisting of two glued 4-simplices (decomposition of the 4-sphere) in the Barrett-Crane model in the large internal spin regime.

  18. Lead poisoning in a Mississippi sandhill crane

    USGS Publications Warehouse

    Franson, J. Christian; Hereford, Scott G.

    1994-01-01

    Lead poisoning from the ingestion of spent lead shot is well documented in waterfowl (Sanderson and Bellrose 1986) and has been reported in other wetland (Locke et al. 1991, Windingstad et al. 1984) and upland (Hunter and Rosen 1965, Locke and Bagley 1967) avian species. Ingested fishing weights have been implicated in lead poisoning of Trumpeter Swans (Cygnus buccinator) (Blus et al. 1989), Common Loons (Gavia immer) (Locke et al. 1982, Franson and Cliplef 1992, Pokras and Chafe1 1992), Mute Swans (Cygnus olor) (Birkhead 1982), and Sandhill Cranes (Grus canadensis) (Windingstad et al. 1984). The significance of lead poisoning as a mortality factor in avian species other than waterfowl is probably underestimated (Locke and Friend 1992), and any cause of mortality becomes particularly important in species with small population sizes. We report here the first known case of lead poisoning in a Mississippi Sandhill Crane (Grus canadensis pulla), a critically endangered subspecies.

  19. Fuzzy crane control with sensorless payload deflection feedback for vibration reduction

    NASA Astrophysics Data System (ADS)

    Smoczek, Jaroslaw

    2014-05-01

    Different types of cranes are widely used for shifting cargoes in building sites, shipping yards, container terminals and many manufacturing segments where the problem of fast and precise transferring a payload suspended on the ropes with oscillations reduction is frequently important to enhance the productivity, efficiency and safety. The paper presents the fuzzy logic-based robust feedback anti-sway control system which can be applicable either with or without a sensor of sway angle of a payload. The discrete-time control approach is based on the fuzzy interpolation of the controllers and crane dynamic model's parameters with respect to the varying rope length and mass of a payload. The iterative procedure combining a pole placement method and interval analysis of closed-loop characteristic polynomial coefficients is proposed to design the robust control scheme. The sensorless anti-sway control application developed with using PAC system with RX3i controller was verified on the laboratory scaled overhead crane.

  20. Crane Lowers Aeroshell

    NASA Technical Reports Server (NTRS)

    2003-01-01

    January 31, 2003

    In the Payload Hazardous Servicing Facility, an overhead crane lowers the Mars Exploration Rover (MER) aeroshell toward a rotation stand. Set to launch in 2003, the MER Mission will consist of two identical rovers designed to cover roughly 110 yards (100 meters) each Martian day. Each rover will carry five scientific instruments that will allow it to search for evidence of liquid water that may have been present in the planet's past. The rovers will be identical to each other, but will land at different regions of Mars. The first rover has a launch window opening May 30, and the second rover a window opening June 25, 2003.

  1. Roll and pitch set-up errors during volumetric modulated arc delivery: can adapting gantry and collimator angles compensate?

    PubMed

    Hoffmans-Holtzer, Nienke A; Hoffmans, Daan; Dahele, Max; Slotman, Ben J; Verbakel, Wilko F A R

    2015-03-01

    The purpose of this work was to investigate whether adapting gantry and collimator angles can compensate for roll and pitch setup errors during volumetric modulated arc therapy (VMAT) delivery. Previously delivered clinical plans for locally advanced head-and-neck (H&N) cancer (n = 5), localized prostate cancer (n = 2), and whole brain with simultaneous integrated boost to 5 metastases (WB + 5M, n = 1) were used for this study. Known rigid rotations were introduced in the planning CT scans. To compensate for these, in-house software was used to adapt gantry and collimator angles in the plan. Doses to planning target volumes (PTV) and critical organs at risk (OAR) were calculated with and without compensation and compared with the original clinical plan. Measurements in the sagittal plane in a polystyrene phantom using radiochromic film were compared by gamma (γ) evaluation for 2 H&N cancer patients. For H&N plans, the introduction of 2°-roll and 3°-pitch rotations reduced mean PTV coverage from 98.7 to 96.3%. This improved to 98.1% with gantry and collimator compensation. For prostate plans respective figures were 98.4, 97.5, and 98.4%. For WB + 5M, compensation worked less well, especially for smaller volumes and volumes farther from the isocenter. Mean comparative γ evaluation (3%, 1 mm) between original and pitched plans resulted in 86% γ < 1. The corrected plan restored the mean comparison to 96% γ < 1. Preliminary data suggest that adapting gantry and collimator angles is a promising way to correct roll and pitch set-up errors of < 3° during VMAT for H&N and prostate cancer.

  2. Results of the second (1996) experiment to lead cranes on migration behind a motorized ground vehicle

    USGS Publications Warehouse

    Ellis, D.H.; Clauss, B.; Watanabe, T.; Mykut, R.C.; Shawkey, M.; Mummert, D.P.; Sprague, D.T.; Ellis, Catherine H.; Trahan, F.B.

    2001-01-01

    Fourteen greater sandhill cranes (Grus canadensis tabida) were trained to follow a specially-equipped truck and 12 were led along a ca 620-km route from Camp Navajo in northern Arizona to the Buenos Aires National Wildlife Refuge near the Arizona/Mexico border. Ten survived the trek, 380 km of which were flown, although only a few cranes flew every stage of the route. Major problems during the migration were powerline collisions (ca 15, 2 fatal) and overheating (when air temperatures exceeded ca 25 C). The tenacity of the cranes in following both in 1995 and 1996 under unfavorable conditions (e.g., poor light, extreme dust, or heat) demonstrated that cranes could be led over long distances by motorized vehicles on the ground.

  3. Lester Crane: Getting Approvals After the Fact.

    ERIC Educational Resources Information Center

    Schaub, Mark F.

    1998-01-01

    Presents a case study for use in business communication classes to help students understand and learn both the context and the strategies for communication with business and management. Discusses planning required to do business (selling speciality construction cranes) in the Middle East. Includes some correspondence and two assignments. (SR)

  4. Fecal corticoid monitoring in whooping cranes trained to follow ultralight aircraft

    USGS Publications Warehouse

    Hartup, B.K.; Czekala, Nancy M.; Olsen, Glenn H.; Langenberg, J.A.; Chavez-Ramirez, Felipe

    2005-01-01

    The use of fecal corticoid assays to measure stress in North American cranes has been limited to laboratory validation and a single field project involving reintroduced sandhill cranes (Ludders et aI., 1998, 2001; Hartup et aI., 2004). In 2001, we documented trends in corticoid concentrations among a cohort of ten costume-reared whooping cranes subjected to ultralight aircraft training and migration. All samples were analyzed by a validated corticosterone 1251 radioimmunoassay for determination of corticoid levels. Fecal corticoid concentrations in chicks exhibited a logarithmic decline over the first 14 days after hatching (r = 0.86, p < 0.001). Fecal corticoid concentrations then stabilized at baseline levels (median 68 ng/g, range 17-186 ng/g, n = 116) during the subsequent six weeks of costume-rearing and aircraft habituation in captivity. Fecal corticoid concentrations of eight cranes increased 8-34 fold during shipment in crates to Wisconsin for field training. Increases in fecal corticoid concentrations were positively correlated with age (r = 0.81, p = 0.01), but not body weight (r = 0.44, P = 0.28) at the time of shipping. Fecal corticoid concentrations returned to baseline levels within seven days, and were sustained throughout the remainder of the training period (median 77 ng/g, range 22- 292 ng/g, n=190). Elevations in fecal corticoid concentrations were observed one (p = 0.035) and four days (p = 0.003) following physical examination and placement of leg bands compared to three days prior to the procedures (median 176 ng/g, range 116 - 553 ng/g, n = 19). Fecal corticoid concentrations decreased to pre-procedure levels within seven days. Fecal corticoid concentrations and variation during the 50 day migration period were similar to training levels in Wisconsin, except for a one day increase observed following a violent storm and escape from the temporary holding pen the preceding night (median 243 ng/g, range 228 - 280 ng/g, n = 7). There was an

  5. Design of 6 MeV X-band electron linac for dual-head gantry radiotherapy system

    NASA Astrophysics Data System (ADS)

    Shin, Seung-wook; Lee, Seung-Hyun; Lee, Jong-Chul; Kim, Huisu; Ha, Donghyup; Ghergherehchi, Mitra; Chai, Jongseo; Lee, Byung-no; Chae, Moonsik

    2017-12-01

    A compact 6 MeV electron linac is being developed at Sungkyunkwan University, in collaboration with the Korea atomic energy research institute (KAERI). The linac will be used as an X-ray source for a dual-head gantry radiotherapy system. X-band technology has been employed to satisfy the size requirement of the dual-head gantry radiotherapy machine. Among the several options available, we selected a pi/2-mode, standing-wave, side-coupled cavity. This choice of radiofrequency (RF) cavity design is intended to enhance the shunt impedance of each cavity in the linac. An optimum structure of the RF cavity with a high-performance design was determined by applying a genetic algorithm during the optimization procedure. This paper describes the detailed design process for a single normal RF cavity and the entire structure, including the RF power coupler and coupling cavity, as well as the beam dynamics results.

  6. HEMATOLOGY AND BIOCHEMISTRY IN CAPTIVE WHITE-NAPED CRANES (GRUS VIPIO).

    PubMed

    Rayhel, Laura; Aitken-Palmer, Copper; Joyner, Priscilla; Cray, Carolyn; Lizárraga, César Andrés; Ackerman, Betty; Crowe, Chris

    2015-12-01

    In this retrospective study, 36 hematologic and biochemistry samples from white-naped crane (Grus vipio) were analyzed. All birds were housed at a single institution, and samples were obtained between 1990 and 2013. All cranes were healthy at the time of sample collection, and ages ranged from 1 mo to 33 yr old. Cranes below 18 mo old were considered juveniles. Comparisons were made between means for juveniles and adults and for males and females. Significant increases in adults (P < 0.05) were found in the following variables (differences shown in parentheses): packed cell volume (8.3%), mean cell volume (28 fl), monocyte percentage (3.2%), absolute monocyte count (200 × 10³/ml), total solids (1.0 g/dl), albumin (0.5 g/dl), and sodium (3 mM/L). Significant decreases in adults (P < 0.05) were found in phosphorus (1.7 mg/dl), creatine phosphokinase (1,146 U/L), alkaline phosphatase (451 U/L), lactate dehydrogenase (149 U/L), and glucose (25 mg/dl). Results from adult male and female cranes were also compared; calcium levels were higher in females (4.68 mg/dl, P < 0.05). Plasma electrophoresis and radioimmunoassay for bile acids were performed on 25 banked serum or plasma samples; results from juvenile and adult samples were also compared. Significant increases in adult birds were found in total protein (1.2 g/dl, P < 0.05) and in all absolute values for all protein types; however, no difference was found when protein fractions were compared. Bile acids were found to decrease in adults (19.9 μM/L, P < 0.05).

  7. CRANE WINCH MECHANISM, UPPER LEVEL OF HYDROELECTRIC POWER HOUSE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CRANE WINCH MECHANISM, UPPER LEVEL OF HYDROELECTRIC POWER HOUSE - St. Lucie Canal, Lock No. 1, Hydroelectric Power House, St. Lucie, Cross State Canal, Okeechobee Intracoastal Waterway, Stuart, Martin County, FL

  8. Southeast corner with overhead crane in foreground Bureau of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Southeast corner with overhead crane in foreground - Bureau of Mines Boulder City Experimental Station, Titanium Development Plant, Date Street north of U.S. Highway 93, Boulder City, Clark County, NV

  9. Control Measurements of Crane Rails Performed by Terrestrial Laser Scanning

    PubMed Central

    Kregar, Klemen; Možina, Jan; Ambrožič, Tomaž; Kogoj, Dušan; Marjetič, Aleš; Štebe, Gašper; Savšek, Simona

    2017-01-01

    This article presents a method for measuring the geometry of crane rails with terrestrial laser scanning (TLS). Two sets of crane rails were divided into segments, their planes were adjusted, and the characteristic rail lines were defined. We used their profiles to define the positional and altitude deviations of the rails, the span and height difference between the two rails, and we also verified that they complied with the Eurocode 3 standard. We tested the method on crane rails at the hydroelectric power plant in Krško and the thermal power plant in Brestanica. We used two scanning techniques: “pure” TLS (Riegel VZ-400) and “hybrid” TLS (Leica MS50) scanning. This article’s original contribution lies in the detailed presentation of the computations used to define the characteristic lines of the rails without using the numeric procedures from existing software packages. We also analysed the influence of segment length and point density on the rail geometry results, and compared the two laser scanning techniques. We also compared the results obtained by terrestrial laser scanning with the results obtained from the classic polar method, which served as a reference point for its precision. PMID:28726755

  10. Inverse dynamics of adaptive structures used as space cranes

    NASA Technical Reports Server (NTRS)

    Das, S. K.; Utku, S.; Wada, B. K.

    1990-01-01

    As a precursor to the real-time control of fast moving adaptive structures used as space cranes, a formulation is given for the flexibility induced motion relative to the nominal motion (i.e., the motion that assumes no flexibility) and for obtaining the open loop time varying driving forces. An algorithm is proposed for the computation of the relative motion and driving forces. The governing equations are given in matrix form with explicit functional dependencies. A simulator is developed to implement the algorithm on a digital computer. In the formulations, the distributed mass of the crane is lumped by two schemes, vz., 'trapezoidal' lumping and 'Simpson's rule' lumping. The effects of the mass lumping schemes are shown by simulator runs.

  11. Origin of three Red-crowned Cranes Grus japonensis found in northeast Honshu and west Hokkaido, Japan, from 2008 to 2012.

    PubMed

    Miura, Yoshiaki; Shiraishi, Junya; Shiomi, Akira; Kitazawa, Takio; Hiraga, Takeo; Matsumoto, Fumio; Teraoka, Hiroki; Masatomi, Hiroyuki

    2013-01-01

    The Red-crowned Crane Grus japonensis is an endangered species that has two separate breeding populations, one in the Amur River basin and the other in north and east Hokkaido, Japan. So far, only two (Gj1 and Gj2) and seven (Gj3-Gj9) haplotypes in D-loop of mtDNA were identified in Japan and in the continent, respectively. We obtained feathers from three cranes found in northeast Honshu. The crane in Akita in 2008, which also arrived at west Hokkaido, had a novel haplotype (Gj10). Another crane in Akita in 2009 showed a heteroplasmy (Gj7 and a novel type, Gj12). The third crane in Miyagi in 2010 also showed another type, Gj11. These results suggest that three Red-crowned Cranes appeared in Honshu and west Hokkaido were from the continent.

  12. 78 FR 27913 - Revision of Crane Regulation Standards for Mobile Offshore Drilling Units (MODUs), Offshore...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-13

    ...The Coast Guard proposes to revise regulations related to the design, certification, inspection, and testing of cranes. These regulations apply to cranes installed on Mobile Offshore Drilling Units (MODUs), Offshore Supply Vessels (OSVs), and floating Outer Continental Shelf (OCS) facilities. This revision would update industry standards incorporated by reference with more recent versions, which are used by industry and incorporated in Bureau of Safety and Environmental Enforcement regulations. Additionally, the Coast Guard proposes to revise regulations regarding certification, inspection, and testing of cranes by allowing use of additional organizations to act in lieu of Coast Guard marine inspectors.

  13. Subspecies composition of sandhill crane harvest in North Dakota, 1968-94

    USGS Publications Warehouse

    Kendall, W.L.; Johnson, D.H.; Kohn, S.C.; Urbanek, R.P.; Stahlecker, D.W.

    1997-01-01

    North Dakota is a major fall staging area for the Midcontinent Population of sandhill cranes (Grus canadensis), which is composed of three subspecies: the greater (G. c. tabida), Canadian (G. c. rowani), and lesser (G. c. canadensis). The number of cranes killed by hunters in North Dakota averaged 6,793 during 1990-94 seasons, ranking second highest among crane-hunting states. The distribution of harvest among subspecies is important, due to concerns about the poorly known status of these subspecies, especially the greater. We estimated subspecies composition of the harvest in North Dakota using morphometric data collected from field samples of birds harvested since 1968. Subspecies composition varied both spatially (across counties from east to west) and temporally (among 3 periods of distinct harvest regulations and within season). Lessers predominated in the west and Canadians and greaters in the east. For the 1990-94 period we estimated that mortality due to hunting in North Dakota averaged at least 1,085 (18%) greaters, 2,138 (36%) Canadians, and 2,716 (46%) lessers.

  14. Lagrangian approach to the Barrett-Crane spin foam model

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bonzom, Valentin; Laboratoire de Physique, ENS Lyon, CNRS UMR 5672, 46 Allee d'Italie, 69007 Lyon; Livine, Etera R.

    2009-03-15

    We provide the Barrett-Crane spin foam model for quantum gravity with a discrete action principle, consisting in the usual BF term with discretized simplicity constraints which in the continuum turn topological BF theory into gravity. The setting is the same as usually considered in the literature: space-time is cut into 4-simplices, the connection describes how to glue these 4-simplices together and the action is a sum of terms depending on the holonomies around each triangle. We impose the discretized simplicity constraints on disjoint tetrahedra and we show how the Lagrange multipliers distort the parallel transport and the correlations between neighboringmore » simplices. We then construct the discretized BF action using a noncommutative * product between SU(2) plane waves. We show how this naturally leads to the Barrett-Crane model. This clears up the geometrical meaning of the model. We discuss the natural generalization of this action principle and the spin foam models it leads to. We show how the recently introduced spin foam fusion coefficients emerge with a nontrivial measure. In particular, we recover the Engle-Pereira-Rovelli spin foam model by weakening the discretized simplicity constraints. Finally, we identify the two sectors of Plebanski's theory and we give the analog of the Barrett-Crane model in the nongeometric sector.« less

  15. Persistent organic pollutants in red-crowned cranes (Grus japonensis) from Hokkaido, Japan.

    PubMed

    Kakimoto, Kensaku; Akutsu, Kazuhiko; Nagayoshi, Haruna; Konishi, Yoshimasa; Kajimura, Keiji; Tsukue, Naomi; Yoshino, Tomoo; Matsumoto, Fumio; Nakano, Takeshi; Tang, Ning; Hayakawa, Kazuichi; Toriba, Akira

    2018-01-01

    The red-crowned crane (Grus japonensis) from eastern Hokkaido is classified as a Special Natural Monument in Japan. In this study, we determined the concentrations of persistent organic pollutants (POPs) in red-crowned crane muscle tissues (n = 47). Polychlorinated biphenyls (PCBs) had the highest median concentration (240ng/g lipid weight), followed by dichlorodiphenyltrichloroethane and its metabolites (DDTs) (150ng/g lipid weight), chlordane-related compounds (CHLs) (36ng/g lipid weight), hexachlorobenzene (HCB) (16ng/g lipid weight), hexachlorocyclohexanes (HCHs) (4.4ng/g lipid weight), polybrominated diphenyl ethers (PBDEs) (1.8ng/g lipid weight), and finally, Mirex (1.5ng/g lipid weight). Additionally, a positive correlation was found among POP concentrations. No sex differences beyond body parameters were observed. Additionally, red-crowned cranes exhibited a high enantiomeric excess of (+)-alpha-HCH, with enantiomer fractions varying from 0.51 to 0.87 (average: 0.69). Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Sandhill crane abundance and nesting ecology at Grays Lake, Idaho

    USGS Publications Warehouse

    Austin, J.E.; Henry, A.R.; Ball, I.J.

    2007-01-01

    We examined population size and factors influencing nest survival of greater sandhill cranes (Grus canadensis tabida) at Grays Lake National Wildlife Refuge, Idaho, USA, during 1997-2000. Average local population of cranes from late April to early May, 1998-2000, was 735 cranes, 34% higher than that reported for May 1970-1971. We estimated 228 (SE = 30) nests in the basin core (excluding renests), 14% higher than a 1971 estimate. Apparent nest success in our study (x?? = 60%, n = 519 nests) was lower than reported for Grays Lake 30-50 years earlier. Daily survival rates (DSRs) of all nests averaged 0.9707 (41.2%). The best model explaining nest survival included year and water depth and their interaction. Nest survival was highest (DSR = 0.9827) in 1998 compared with other years (0.9698-0.9707). Nest survival changed little relative to water depth in 1998, when flooding was extensive and alternative prey (microtines) irrupted, but declined markedly with lower water levels in 2000, the driest year studied. Hypotheses relating nest survival to vegetation height, land use (idle, summer grazing, fall grazing), and date were not supported. In a before-after-control-impact design using 12 experimental fields, nest survival differed among years but not among management treatments (idle, fall graze, fall burn, and summer-graze-idle rotation), nor was there an interaction between year and treatments. However, DSRs in fall-burn fields declined from 0.9781 in 1997-1998 to 0.9503 in 1999-2000 (posttreatment). Changes in the predator community have likely contributed to declines in nest success since the 1950s and 1970s. Our results did not support earlier concerns about effects of habitat management practices on crane productivity. Nest survival could best be enhanced by managing spring water levels. Managers should continue censuses during late April to evaluate long-term relationships to habitat conditions and management.

  17. SU-E-J-28: Gantry Speed Significantly Affects Image Quality and Imaging Dose for 4D Cone-Beam Computed Tomography On the Varian Edge Platform

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Santoso, A; Song, K; Gardner, S

    Purpose: 4D-CBCT facilitates assessment of tumor motion at treatment position. We investigated the effect of gantry speed on 4D-CBCT image quality and dose using the Varian Edge On-Board Imager (OBI). Methods: A thoracic protocol was designed using a 125 kVp spectrum. Image quality parameters were obtained via 4D acquisition using a Catphan phantom with a gating system. A sinusoidal waveform was executed with a five second period and superior-inferior motion. 4D-CBCT scans were sorted into 4 and 10 phases. Image quality metrics included spatial resolution, contrast-to-noise ratio (CNR), uniformity index (UI), Hounsfield unit (HU) sensitivity, and RMS error (RMSE) ofmore » motion amplitude. Dosimetry was accomplished using Gafchromic XR-QA2 films within a CIRS Thorax phantom. This was placed on the gating phantom using the same motion waveform. Results: High contrast resolution decreased linearly from 5.93 to 4.18 lp/cm, 6.54 to 4.18 lp/cm, and 5.19 to 3.91 lp/cm for averaged, 4 phase, and 10 phase 4DCBCT volumes respectively as gantry speed increased from 1.0 to 6.0 degs/sec. CNRs decreased linearly from 4.80 to 1.82 as the gantry speed increased from 1.0 to 6.0 degs/sec, respectively. No significant variations in UIs, HU sensitivities, or RMSEs were observed with variable gantry speed. Ion chamber measurements compared to film yielded small percent differences in plastic water regions (0.1–9.6%), larger percent differences in lung equivalent regions (7.5–34.8%), and significantly larger percent differences in bone equivalent regions (119.1–137.3%). Ion chamber measurements decreased from 17.29 to 2.89 cGy with increasing gantry speed from 1.0 to 6.0 degs/sec. Conclusion: Maintaining technique factors while changing gantry speed changes the number of projections used for reconstruction. Increasing the number of projections by decreasing gantry speed decreases noise, however, dose is increased. The future of 4DCBCT’s clinical utility relies on further

  18. Varying Land-Use Has an Influence on Wattled and Grey Crowned Cranes' Abundance and Distribution in Driefontein Grasslands Important Bird Area, Zimbabwe.

    PubMed

    Fakarayi, Togarasei; Mashapa, Clayton; Gandiwa, Edson; Kativu, Shakkie

    2016-01-01

    Three species of cranes are distributed widely throughout southern Africa, but little is known about how they respond to the changes in land-use that have occurred in this region. This study assessed habitat preference of the two crane species across land-use categories of the self contained small scale commercial farms of 30 to 40 ha per household (A1), large scale commercial agriculture farms of > 50 ha per household (A2) and Old Resettlement, farms of < 5 ha per household with communal grazing land in Driefontein Grasslands Important Bird Area (IBA), Zimbabwe. The study further explored how selected explanatory (environmental) habitat variables influence crane species abundance. Crane bird counts and data on influencing environmental variables were collected between June and August 2012. Our results show that varying land-use categories had an influence on the abundance and distribution of the Wattled Crane (Bugeranus carunculatus) and the Grey Crowned Crane (Belearica regulorum) across Driefontein Grasslands IBA. The Wattled Crane was widely distributed in the relatively undisturbed A2 farms while the Grey Crowned Crane was associated with the more disturbed land of A1 farms, Old Resettlement and its communal grazing land. Cyperus esculentus and percent (%) bare ground were strong environmental variables best explaining the observed patterns in Wattled Crane abundance across land-use categories. The pattern in Grey Crowned Crane abundance was best explained by soil penetrability, moisture and grass height variables. A holistic sustainable land-use management that takes into account conservation of essential habitats in Driefontein Grasslands IBA is desirable for crane populations and other wetland dependent species that include water birds.

  19. Disseminated visceral coccidiosis in a wild white-naped crane (Grus vipio)

    USGS Publications Warehouse

    Kwon, Y.K.; Jeon, W.J.; Kang, M.I.; Kim, J.-H.; Olsen, Glenn H.

    2006-01-01

    Disseminated visceral coccidiosis (DVC) was unexpectedly recognized in a wild white-naped crane (Grits vipio) killed by phosphamidon insecticide. On gross pathologic examination, widely disseminated white nodules were found on the serosa of the proventriculus, gizzard, and intestine, as well as on the surface and in the parenchyma of liver, spleen, and cardiac muscle. Microscopically, asexual stages of a coccidia were observed in some nodules. However, the species of coccidia could not be determined because no oocysts were found on fecal examination. This is believed to be the first reported case of DVC in a wild white-naped crane infected with Eimeria spp.

  20. Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments.

    PubMed

    Spasojević Brkić, Vesna K; Veljković, Zorica A; Golubović, Tamara; Brkić, Aleksandar Dj; Kosić Šotić, Ivana

    2016-01-01

    Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data and provide additional recommendations for design. In this paper, dimensioning of the crane cabin interior space was carried out using a sample of 64 crane operators' anthropometric measurements, in the Republic of Serbia, by measuring workspace with 10 parameters using nine measured anthropometric data from each crane operator. This paper applies experiments run via full factorial designs using a combined traditional and Taguchi approach. The experiments indicated which design parameters are influenced by which anthropometric measurements and to what degree. The results are expected to be of use for crane cabin designers and should assist them to design a cabin that may lead to less strenuous sitting postures and fatigue for operators, thus improving safety and accident prevention.

  1. Stress Analysis of Boom of Special Mobile Crane for Plain Region in Transmission Line

    NASA Astrophysics Data System (ADS)

    Qin, Jian; Shao, Tao; Chen, Jun; Wan, Jiancheng; Li, Zhonghuan; Jiang, Ming

    2017-10-01

    Basis of the boom force analysis of special mobile crane for plain region in transmission line, the load type of boom design is confirmed. According to the different combinations of boom sections, the composite pattern of the different boom length is obtained to suit the actual conditions of boom overlapping. The large deformation model is employed with FEM to simulate the stress distribution of boom, and the calculation results are checked. The performance curves of rated load with different arm length and different working range are obtained, which ensures the lifting capacity of special mobile crane meeting the requirement of tower erection of transmission line. The proposed FEM of boom of mobile crane would provide certain guiding and reference to the boom design.

  2. 77 FR 27085 - TMI Forest Products, Inc., Crane Creek Division, Morton, WA; Notice of Negative Determination...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-08

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-80,454] TMI Forest Products, Inc., Crane Creek Division, Morton, WA; Notice of Negative Determination Regarding Application for... workers of TMI Forest Products, Inc., Crane Creek Division, Morton, Washington (subject firm). The [[Page...

  3. The NIST SPIDER, A Robot Crane

    PubMed Central

    Albus, James; Bostelman, Roger; Dagalakis, Nicholas

    1992-01-01

    The Robot Systems Division of the National Institute of Standards and Technology has been experimenting for several years with new concepts for robot cranes. These concepts utilize the basic idea of the Stewart Platform parallel link manipulator. The unique feature of the NIST approach is to use cables as the parallel links and to use winches as the actuators. So long as the cables are all in tension, the load is kinematically constrained, and the cables resist perturbing forces and moments with equal stiffness to both positive and negative loads. The result is that the suspended load is constrained with a mechanical stiffness determined by the elasticity of the cables, the suspended weight, and the geometry of the mechanism. Based on these concepts, a revolutionary new type of robot crane, the NIST SPIDER (Stewart Platform Instrumented Drive Environmental Robot) has been developed that can control the position, velocity, and force of tools and heavy machinery in all six degrees of freedom (x, y, z, roll, pitch, and yaw). Depending on what is suspended from its work platform, the SPIDER can perform a variety of tasks. Examples are: cutting, excavating and grading, shaping and finishing, lifting and positioning. A 6 m version of the SPIDER has been built and critical performance characteristics analyzed. PMID:28053439

  4. The NIST SPIDER, A Robot Crane.

    PubMed

    Albus, James; Bostelman, Roger; Dagalakis, Nicholas

    1992-01-01

    The Robot Systems Division of the National Institute of Standards and Technology has been experimenting for several years with new concepts for robot cranes. These concepts utilize the basic idea of the Stewart Platform parallel link manipulator. The unique feature of the NIST approach is to use cables as the parallel links and to use winches as the actuators. So long as the cables are all in tension, the load is kinematically constrained, and the cables resist perturbing forces and moments with equal stiffness to both positive and negative loads. The result is that the suspended load is constrained with a mechanical stiffness determined by the elasticity of the cables, the suspended weight, and the geometry of the mechanism. Based on these concepts, a revolutionary new type of robot crane, the NIST SPIDER (Stewart Platform Instrumented Drive Environmental Robot) has been developed that can control the position, velocity, and force of tools and heavy machinery in all six degrees of freedom ( x, y, z , roll, pitch, and yaw). Depending on what is suspended from its work platform, the SPIDER can perform a variety of tasks. Examples are: cutting, excavating and grading, shaping and finishing, lifting and positioning. A 6 m version of the SPIDER has been built and critical performance characteristics analyzed.

  5. Development of Measurement Device of Working Radius of Crane Based on Single CCD Camera and Laser Range Finder

    NASA Astrophysics Data System (ADS)

    Nara, Shunsuke; Takahashi, Satoru

    In this paper, what we want to do is to develop an observation device to measure the working radius of a crane truck. The device has a single CCD camera, a laser range finder and two AC servo motors. First, in order to measure the working radius, we need to consider algorithm of a crane hook recognition. Then, we attach the cross mark on the crane hook. Namely, instead of the crane hook, we try to recognize the cross mark. Further, for the observation device, we construct PI control system with an extended Kalman filter to track the moving cross mark. Through experiments, we show the usefulness of our device including new control system of mark tracking.

  6. An ergonomics study on compatibility of controls of overhead cranes in a heavy engineering factory in West Bengal.

    PubMed

    Sen, R N; Das, S

    2000-04-01

    Ergonomics studies, on the machine control and the resultant movements of the cabins and the hooks in 51 electric overhead travelling cranes in a heavy engineering factory, showed that control-movement compatibility is absent in most of the cranes. Also, the layout of the groups of controls and the orientations of each of the individual controls with respect to the operators' seats varied from one crane to another. As the operators were shifted from one crane to another every week, there was a high chance of making mistakes during moving the controls, which might have resulted in severe accidents, especially during periods of high workload. A number of low-cost ergonomics solutions have been recommended to minimize these problems.

  7. Predicting and mapping potential Whooping Crane stopover habitat to guide site selection for wind energy projects.

    PubMed

    Belaire, J Amy; Kreakie, Betty J; Keitt, Timothy; Minor, Emily

    2014-04-01

    Migratory stopover habitats are often not part of planning for conservation or new development projects. We identified potential stopover habitats within an avian migratory flyway and demonstrated how this information can guide the site-selection process for new development. We used the random forests modeling approach to map the distribution of predicted stopover habitat for the Whooping Crane (Grus americana), an endangered species whose migratory flyway overlaps with an area where wind energy development is expected to become increasingly important. We then used this information to identify areas for potential wind power development in a U.S. state within the flyway (Nebraska) that minimize conflicts between Whooping Crane stopover habitat and the development of clean, renewable energy sources. Up to 54% of our study area was predicted to be unsuitable as Whooping Crane stopover habitat and could be considered relatively low risk for conflicts between Whooping Cranes and wind energy development. We suggest that this type of analysis be incorporated into the habitat conservation planning process in areas where incidental take permits are being considered for Whooping Cranes or other species of concern. Field surveys should always be conducted prior to construction to verify model predictions and understand baseline conditions. © 2013 Society for Conservation Biology.

  8. Prevalence and genetic characterization of eimeriid coccidia from feces of black-necked cranes, Grus nigricollis.

    PubMed

    Liang, Yu; Zhao, ZiJiao; Hu, JunJie; Esch, Gerald W; Peng, MingChun; Liu, Qiong; Chen, JinQing

    2018-03-01

    Disseminated visceral coccidiosis (DVC) is a widely distributed intestinal and extraintestinal disease of cranes caused by eimeriid coccidia and has lethal pathogenicity to several crane species. Here, feces of 164 black-necked cranes collected in Dashanbao Black-necked Crane National Nature Reserve, China, were examined to determine the prevalence of coccidial oocysts. Of the 164 fecal samples, 76 (46.3%) were positive for oocysts of Eimeria, including E. gruis in 59 (35.9%), E. reichenowi in 52 (31.7%), and E. bosquei in 47 (28.7%) by microscopic observation. Sixty-eight (89.5%) of these positive samples included two or more morphologically identifiable species of Eimeria. The nearly full length 18S rRNA gene (18S rRNA; about 1.8 kb) and partial mitochondrial cytochrome c oxidase I gene (COX1; about 1.3 kb) from oocysts of each morphologically distinct species of Eimeria were amplified, sequenced, and analyzed. BLAST searches using these new 18S rRNA sequences for E. gruis, E. reichenowi, or E. bosquei showed the most similar sequences were those of E. gruis (98.7-99.7% identity), E. reichenowi (97.9-100% identity), or E. gruis (98.6-99.6% identity) isolated from different species of Grus. BLAST searches using the new COX1 sequences for the three species of Eimeria showed that no nucleotide sequences of Eimeria and Isospora coccidia in GenBank have more than 83.0% identity with these species. Identities among the new COX1 sequences were 91.8% for E. gruis and E. reichenowi, 94.5% for E. gruis and E. bosquei, and 91.3% for E. reichenowi and E. bosquei. Phylogenetic analysis based on 18S rRNA or COX1 sequences indicated that Eimeria spp. in black-necked cranes were clustered together with other previously identified Eimeria species from different cranes.

  9. FIRST FLOOR LABORATORY, VIEW TO SOUTH FROM MEZZANINE, TRAVELING CRANE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR LABORATORY, VIEW TO SOUTH FROM MEZZANINE, TRAVELING CRANE IN FOREGROUND - Mines Experiment Station, University of Minnesota, Twin Cities Campus, 56 East River Road, Minneapolis, Hennepin County, MN

  10. Cranes in East Asia; Proceedings of the symposium held in Harbin, People's Republic of China, June 9-18, 1998

    USGS Publications Warehouse

    Johnson, Richard L.; Hongfei, Zou; Stendell, Rey C.

    2001-01-01

    Introductory Remarks (R.C. Stendell): I appreciate the opportunity to be in Harbin and participate in the International Scientific Workshop on Cranes in East Asia. I would like to provide some background information on how this meeting came to be. Almost one year ago, in July 1997, Dr. Kun John of the Seoul National University contacted the U.S. Geological Survey’s Midcontinent Ecological Science Center (MESC) requesting that we host a meeting of scientists from the Republic of Korea (ROK) and the Democratic People’s Republic of Korea (DPRK) to discuss the biology and ecology of cranes on the Korean peninsula. Dr. John and his colleagues expressed concern about three species of cranes that migrate up and down the Korean peninsula and use the Demilitarized Zone. The species of interest are the Red-crowned Crane, White-naped Crane, and the Hooded Crane. The primary question was the conservation of these species in this part of the world. Another concern involved exploring potential economic values and opportunities associated with these species. Richard Johnson, an economist at MESC, assumed responsibility as the primary MESC contact to help bring about this meeting.

  11. 75 FR 47905 - Cranes and Derricks in Construction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-09

    ... guiding a large roof section, being lifted by another crane, into place. Winds gusting to 27 miles per... wind and other adverse weather conditions on the equipment's stability and rated capacity. In addition, Sec. 1926.1431, Hoisting personnel, requires that, when wind speed (sustained or gust) exceeds 20 mph...

  12. [ATP content in cryopreserved sperm of Siberian white cranes Grus leucogeranus (Aves: Gruiformes)].

    PubMed

    Maksudov, G Iu; Erokhin, A S; Nesterenko, O N; Panchenko, V G

    2002-01-01

    ATP contents were studied in the native and cryoconserved sperm of Siberian white cranes Grus leucogeranus using bioluminescence analysis. The ATP content in freshly obtained spermatozoa was 12.7 nmol/10(8) cells. No ATP was found in the seminal plasma. In the process of freezing-thawing, the ATP concentration in the spermatozoa decreased by 30%. The differences in the dynamics of ATP content during cryoconservation of sperm of white cranes and other birds and mammals are discussed.

  13. Spring migration ecology of the mid-continent sandhill crane population with an emphasis on use of the Central Platte River Valley, Nebraska

    USGS Publications Warehouse

    Krapu, Gary L.; Brandt, David A.; Kinzel, Paul J.; Pearse, Aaron T.

    2014-01-01

    We conducted a 10-year study (1998–2007) of the Mid-Continent Population (MCP) of sandhill cranes (Grus canadensis) to identify spring-migration corridors, locations of major stopovers, and migration chronology by crane breeding affiliation (western Alaska–Siberia [WA–S], northern Canada–Nunavut [NC–N], west-central Canada–Alaska [WC–A], and east-central Canada–Minnesota [EC–M]). In the Central Platte River Valley (CPRV) of Nebraska, we evaluated factors influencing staging chronology, food habits, fat storage, and habitat use of sandhill cranes. We compared our findings to results from the Platte River Ecology Study conducted during 1978–1980. We determined spring migration corridors used by the breeding affiliations (designated subpopulations for management purposes) by monitoring 169 cranes marked with platform transmitter terminals (PTTs). We also marked and monitored 456 cranes in the CPRV with very high frequency (VHF) transmitters to evaluate length and pattern of stay, habitat use, and movements. An estimated 42% and 58% of cranes staging in the CPRV were greater sandhill cranes (G. c. tabida) and lesser sandhill cranes (G. c. canadensis), and they stayed for an average of 20 and 25 days (2000–2007), respectively. Cranes from the WA–S, NC–N, WC–A, and EC–M affiliations spent an average of 72, 77, 52, and 53 days, respectively, in spring migration of which 28, 23, 24, and 18 days occurred in the CPRV. The majority of the WA–S subpopulation settled in the CPRV apparently because of inadequate habitat to support more birds upstream, although WA–S cranes accounted for >90% of birds staging in the North Platte River Valley. Crane staging duration in the CPRV was negatively correlated with arrival dates; 92% of cranes stayed >7 days. A program of annual mechanical removal of mature stands of woody growth and seedlings that began in the early 1980s primarily in the main channel of the Platte River has allowed distribution of crane

  14. Remote monitoring of parental incubation conditions in the greater sandhill crane

    USGS Publications Warehouse

    Gee, G.F.; Hatfield, J.; Howey, P.J.

    1995-01-01

    To monitor incubation conditions in nests of greater sandhill cranes, a radiotransmitting egg was built using six temperature sensors, a position sensor, and a light sensor. Sensor readings were received, along with time of observations, and stored in a computer. The egg was used to monitor incubation in nests of six pairs of cranes during 1987 and 1988. Ambient temperature was also measured. Analysis of covariance (ANCOVA) was used to relate highest egg temperature, core egg temperature, and lowest egg temperature to ambient temperature, time since the egg was last turned, and time since the beginning of incubation. Ambient temperature had the greatest effect on egg temperature (P 0.0001), followed by the time since the beginning of incubation and time since the egg was last turned. Pair effect, the class variable in the ANCOVA. was also very significant (P < 0.0001). A nine-term Fourier series was used to estimate the average core egg temperature versus time of day and was found to fit the data well (r2 = 0.94). The Fourier series will be used to run a mechanical incubator to simulate natural incubation conditions for cranes.

  15. FOUNDRY LANDSCAPE LOOKING NORTHWEST FROM MALLEABLE STOCK YARD CRANE SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FOUNDRY LANDSCAPE LOOKING NORTHWEST FROM MALLEABLE STOCK YARD CRANE SHOWING THE MALLEABLE ANNEALING BUILDING AND THE BRASS FOUNDRY. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  16. FOUNDRY LANDSCAPE LOOKING WESTSOUTHWEST FROM MALLEABLE STOCK YARD CRANE SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FOUNDRY LANDSCAPE LOOKING WEST-SOUTHWEST FROM MALLEABLE STOCK YARD CRANE SHOWING SHED ROOF OF OLD MALLEABLE CUPOLA CHARGER. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  17. Control system and method for payload control in mobile platform cranes

    DOEpatents

    Robinett, III, Rush D.; Groom, Kenneth N.; Feddema, John T.; Parker, Gordon G.

    2002-01-01

    A crane control system and method provides a way to generate crane commands responsive to a desired payload motion to achieve substantially pendulation-free actual payload motion. The control system and method apply a motion compensator to maintain a payload in a defined payload configuration relative to an inertial coordinate frame. The control system and method can further comprise a pendulation damper controller to reduce an amount of pendulation between a sensed payload configuration and the defined payload configuration. The control system and method can further comprise a command shaping filter to filter out a residual payload pendulation frequency from the desired payload motion.

  18. MACHINE SHOP, WEST BAY, DETAIL OF COLUMN, BEAM, CRANE RAIL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MACHINE SHOP, WEST BAY, DETAIL OF COLUMN, BEAM, CRANE RAIL, AND TRUSS CONNECTION TO ERECTING SHOP, LOOKING NORTHWEST. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

  19. A complex alloantigen system in Florida sandhill cranes, Grus canadensis pratensis: Evidence for the major histocompatibility (B) system

    USGS Publications Warehouse

    Jarvi, S.I.; Gee, G.F.; Miller, M.M.; Briles, W.E.

    1995-01-01

    The B blood group system constitutes the major histocompatibility complex (Mhc) in birds. The Mhc is a cluster of genes largely devoted to the processing and presentation of antigen. The Mhc is highly polymorphic in many species and, thus, useful in the evaluation of genetic diversity for fitness traits within populations of a variety of animals. Correlations found between particular Mhc haplotypes and resistance to certain diseases emphasize the importance of understanding the functional significance of diversity of the Mhc, particularly in species threatened with extinction. As part of studies focused on genetic diversity in wild birds, serological techniques were used to define a highly polymorphic alloantigen system in seven families of Florida sandhill cranes (Grus canadensis pratensis). The results of analyses with antisera produced within the crane families and with chicken Mhc antigen-specific reagents revealed a single major alloantigen system that is likely the Mhc of the Florida sandhill crane. Preliminary experiments indicate that these crane alloantisera will provide a means of defining .the Mhc in other species of cranes.

  20. Development of remote crane system for use inside small argon hot-cell

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lee, Jong Kwang; Park, Byung Suk; Yu, Seung-Nam

    2013-07-01

    In this paper, we describe the design of a novel crane system for the use in a small argon hot-cell where only a pair of master-slave manipulators (MSM) is available for the remote maintenance of the crane. To increase the remote maintainability in the space-limited environment, we devised a remote actuation mechanism in which electrical parts consisting of a servo-motor, a position sensor, and two limit switches located inside the workspace of the MSM transmit power to the mechanical parts located in the ceiling. Even though the design concept does not provide thoroughly sufficient solution because the mechanical parts aremore » placed out of the MSM's workspace, the durability of mechanical parts can be easily increased if they have a high safety margin. Therefore, the concept may be one of the best solutions for our special crane system. In addition, we developed a servo-control system based on absolute positioning technology; therefore, it is possible for us to perform the given tasks more safely through an automatic operation. (authors)« less

  1. Accurate analysis of prevalence of coccidiosis in individually identified wild cranes in inhabiting and migrating populations in Japan.

    PubMed

    Honma, Hajime; Suyama, Yoshihisa; Watanabe, Yuki; Matsumoto, Fumio; Nakai, Yutaka

    2011-11-01

    Eimeria gruis and E. reichenowi cause coccidiosis, a major parasitic disease of cranes. By non-invasive molecular approaches, we investigated the prevalence and genetic characterization of pathogens in two Japanese crane habitats; one is Hokkaido inhabited by the endangered red-crowned crane, and the other is Izumi in Kyushu where populations that consist mainly of vulnerable hooded and white-naped cranes migrate in winter. The non-invasively collected faecal samples from each wintering population were first subjected to host genomic DNA-targeted analyses to determine the sample origin and avoid sample redundancy. Extremely high prevalence was observed in the Izumi populations (> 90%) compared with the Hokkaido population (18-30%) by examining 470 specimens by microscopy and PCR-based capillary electrophoresis (PCR-CE), using genetic markers in the second internal transcribed spacer (ITS2). Correspondence analysis of PCR-CE data revealed differences in community composition of coccidia between hooded and white-naped cranes. 18S rRNA and ITS2 sequences were determined from single oocysts excreted by red-crowned and hooded cranes. Phylogenetic analysis of 18S rRNA suggested that E. reichenowi was polyphyletic while E. gruis was monophyletic. Together with PCR-CE data, these results indicate different host specificity among the E. reichenowi type. Our data suggest that E. reichenowi comprises multiple species. © 2011 Society for Applied Microbiology and Blackwell Publishing Ltd.

  2. 46. Interior detail of barge crane engine house with machinery. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. Interior detail of barge crane engine house with machinery. Lambert Hoisting Engine Company Winder Powered by A Gray Marine Diesel. - Barbour Boat Works, Tryon Palace Drive, New Bern, Craven County, NC

  3. Successful treatment of capture myopathy in three wild greater sandhill cranes (Grus canadensis tabida).

    PubMed

    Businga, Nancy K; Langenberg, Julie; Carlson, LaVinda

    2007-12-01

    Two adult and 1 juvenile free-flying greater sandhill cranes (Grus canadensis tabida) were diagnosed with capture myopathy after alpha-chloralose baiting and physical capture during a banding and feeding ecologic study. Blood samples were collected for serum biochemical analysis at the time of capture for the 2 adults, and at 24 hours postcapture, at various intervals during treatment, and at the time of release for all 3 birds. Concentrations of creatine kinase, aspartate transaminase, and lactate dehydrogenase were high within 1 hour of capture and peaked approximately 3 days after capture. By days 10-17 after capture, creatine kinase and lactate dehydrogenase concentrations both decreased to within the reference range measured for cranes at capture, but aspartate transaminase concentrations remained 2-5 times higher than the measured reference range. Treatment consisted of corticosteroids, selenium/vitamin E, parenteral fluids, and gavage feedings. Physical therapy consisted of assisting the cranes to stand and walk 2-8 times a day, massaging leg muscles, and moving limbs manually through the range of motion. The adults were released when they were able to stand up independently and were pacing in the pen. The juvenile was released 12 hours after it was able to stand independently but was returned to the pen when it fell and could not rise. It was treated supportively for an additional 3 days and then successfully released. Both adult cranes were observed on their territories with their original mates after release and returned to their territories for the subsequent 8 years, raising chicks most years. After release, the juvenile was observed in a flock of cranes near its natal territory for the next 2 days.

  4. Mortality factors and diseases in free-ranging Eurasian cranes (Grus grus) in Germany.

    PubMed

    Fanke, Jane; Wibbelt, Gudrun; Krone, Oliver

    2011-07-01

    Detailed postmortem examinations were performed on 167 free-ranging Eurasian Cranes (Grus grus) from Germany, collected between September 1998 and December 2008 to evaluate causes of death and diseases. The most common causes of mortality were traumatic injuries (n=105, 62.9%) from collisions with power lines (n=39, 23.4%) and wire fences (n=12, 7.2%). A group of 28 Eurasian Cranes (16.8%) died from organophosphate intoxication. Predation by White-tailed Sea Eagles (Haliaeetus albicilla) and red foxes (Vulpes vulpes) occurred in four cases (2.4%). Pathologic changes due to infectious diseases were associated with Aspergillus spp. (n=7, 4.2%), endoparasites (n=7, 4.2%), avian poxvirus (n=6, 3.6%), Mycobacterium spp. (n=2, 1.2%), and adenovirus infection (n=1, 0.6%). A severe Strigea spp. infection (n=1, 0.6%) and a leiomyosarcoma (n=1, 0.6%) were newly recognized diseases in Eurasian Cranes in this study.

  5. Ergonomic design of crane cabins: a case study from a steel plant in India.

    PubMed

    Ray, Pradip Kumar; Tewari, V K

    2012-01-01

    The study, carried out at the Batch Annealing Furnace (BAF) shop of Cold Rolling Mill (CRM) at an integrated steel plant of India, concerns ergonomic evaluation and redesign of a manually-operated Electrical Overhead Travelling (EOT) crane cabin. The crane cabin is a complex worksystem consisting of the crane operator and twelve specific machine components embedded in a closed workspace. A crane operator has to perform various activities, such as loading and unloading of coils, setting and removal of convector plates, and routine maintenance work. Initially, an operator had to work in standing posture with bent back most of the time. Ergonomically poor design of the chair and the controls, awkward work postures, and insufficient vision angle resulting in musculoskeletal disorders (MSDs) are some of the critical problems observed.. The study, conceived as an industry-academia joint initiative, was undertaken by a design team, the members of which were drawn from both the company concerned and the institute. With the project executed successfully, a number of lessons, such as how to minimize the anthropometric mismatch, how to improve the layout of the components and controls within enclosed workspace, and how to improve work posture minimizing risk of MSDs have been learned.

  6. SU-F-T-414: Mathematical Formulation of Gantry Starting Angle for Right Medial Tangential Arc in Left Intact Partial Breast Irradiation Using Volumetric Modulated Arc Therapy (VMAT)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Giri, U; Sarkar, B; Kaur, H

    Purpose: To choose appropriate gantry starting angle for partial left breast irradiation using volumetric modulated arc therapy (VMAT). Methods: A random patient of left breast carcinoma was selected for this study. The slice which was selected for this mathematical formulation was having maximum breast thickness and maximum medial and lateral tangential distance. After this appropriate isocenter was chosen on that CT slice. The distances between various points were measured by the measuring tool in Monaco 5.00.04. Using the various trigonometric equations, a final equation was derived which shows the relationship between Gantry start angle, isocenter Location and tissue thickness. Results:more » The final equation for gantry start for right medial tangential arc is given asStarting angle = 270°+tan^(−1)(sin(θ)/(x-1/x-2 +cosθ))The above equation was tested for 10 cases and it was found to be appropriate for all the cases. Conclusion: Gantry starting angle for partial arc irradiation depends upon Breast thickness, Distance between Medial and lateral tangent and isocenter location.« less

  7. Quantitative assessment of pair formation behavior in captive whooping cranes (Grus americana)

    USGS Publications Warehouse

    Nelson, J.T.; Small, C.R.; Ellis, D.H.

    1995-01-01

    Instantaneous scan sampling for mean distance and synchronous action patterns and all-occurrence sampling for unison call, dance, strut, and hoover-up behaviors were conducted for five potential whooping crane pairs at Patuxent Environmental Science Center, Laurel. Maryland. Dance, strut, and hoover-up differed among pairs, as did total frequency of social behaviors. It was unclear whether or not total frequency of social behaviors during pair formation can be used as an index for potential breeding success. The relative importance of different action patterns should be used as indices of pair compatibility in captive whooping cranes.

  8. 32. VIEW FROM CATWALK SHOWING ROOF TRUSSES, OVERHEAD CRANE, AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. VIEW FROM CATWALK SHOWING ROOF TRUSSES, OVERHEAD CRANE, AND MISCELLANEOUS STOCK AND PATTERNS-LOOKING SOUTHWEST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

  9. Design for a Crane Metallic Structure Based on Imperialist Competitive Algorithm and Inverse Reliability Strategy

    NASA Astrophysics Data System (ADS)

    Fan, Xiao-Ning; Zhi, Bo

    2017-07-01

    Uncertainties in parameters such as materials, loading, and geometry are inevitable in designing metallic structures for cranes. When considering these uncertainty factors, reliability-based design optimization (RBDO) offers a more reasonable design approach. However, existing RBDO methods for crane metallic structures are prone to low convergence speed and high computational cost. A unilevel RBDO method, combining a discrete imperialist competitive algorithm with an inverse reliability strategy based on the performance measure approach, is developed. Application of the imperialist competitive algorithm at the optimization level significantly improves the convergence speed of this RBDO method. At the reliability analysis level, the inverse reliability strategy is used to determine the feasibility of each probabilistic constraint at each design point by calculating its α-percentile performance, thereby avoiding convergence failure, calculation error, and disproportionate computational effort encountered using conventional moment and simulation methods. Application of the RBDO method to an actual crane structure shows that the developed RBDO realizes a design with the best tradeoff between economy and safety together with about one-third of the convergence speed and the computational cost of the existing method. This paper provides a scientific and effective design approach for the design of metallic structures of cranes.

  10. Size and mass of grit in gizzards of sandhill cranes, tundra swans, and mute swans

    USGS Publications Warehouse

    Franson, J. Christian; Hansen, Scott P.; Duerr, Adam E.; DeStefano, Stephen

    2001-01-01

    Because it has been suggested that waterbirds may ingest lost or discarded lead fishing weights as grit, we examined grit in the gizzards of Sandhill Cranes (Grus canadensis), Tundra Swans (Cygnus columbianus), and Mute Swans (Cygnus olor), three species where individuals have been poisoned by the ingestion of lead fishing weights. The greatest proportion (by mass) of grit in gizzards of Sandhill Cranes consisted of particles with a minimum dimension of 2.36-4.75 mm. Grit particles in swans were much smaller, with the most prevalent (by mass) being 0.6-1.18 mm. The greatest dimension of the largest grit particle found in cranes and swans was 17.4 mm and 14.0 mm, respectively. The U.S. Environmental Protection Agency has proposed a ban on lead fishing weights of ≤25.4 mm in any dimension. Based on the size of grit particles that we found in gizzards of Sandhill Cranes, Mute Swans, and Tundra Swans, we believe it is unlikely that individuals of those species would ingest, as grit, lead fishing weights larger than 25.4 mm in any dimension.

  11. Artificial insemination in captive Whooping Cranes: Results from genetic analyses

    USGS Publications Warehouse

    Jones, K.L.; Nicolich, Jane M.

    2001-01-01

    Artificial insemination has been used frequently in the captive whooping crane (Grus americana) population. In the 1980s, it was necessary at times to inseminate females with semen from several males during the breeding season or with semen from multiple males simultaneously due to unknown sperm viability of the breeding males. The goals of this study were to apply microsatellite DNA profiles to resolve uncertain paternities and to use these results to evaluate the current paternity assignment assumptions used by captive managers. Microsatellite DNA profiles were successful in resolving 20 of 23 paternity questions. When resolved paternities were coupled with data on insemination timing, substantial information was revealed on fertilization timing in captive whooping cranes. Delayed fertilization from inseminations 6+ days pre-oviposition suggests capability of sperm storage.

  12. 3,000 Paper Cranes: Children's Literature for Remedial Readers.

    ERIC Educational Resources Information Center

    Shumaker, Marjorie P.; Shumaker, Ronald C.

    1988-01-01

    Describes how the educational experience of sixth grade remedial readers was revitalized and enriched through a project that grew out of reading "Sadako and the Thousand Paper Cranes." Suggests using "real" books (literature) to liberate remedial students from skill drills and reading games. (NH)

  13. Robotically Assembled Aerospace Structures: Digital Material Assembly using a Gantry-Type Assembler

    NASA Technical Reports Server (NTRS)

    Trinh, Greenfield; Copplestone, Grace; O'Connor, Molly; Hu, Steven; Nowak, Sebastian; Cheung, Kenneth; Jenett, Benjamin; Cellucci, Daniel

    2017-01-01

    This paper evaluates the development of automated assembly techniques for discrete lattice structures using a multi-axis gantry type CNC machine. These lattices are made of discrete components called digital materials. We present the development of a specialized end effector that works in conjunction with the CNC machine to assemble these lattices. With this configuration we are able to place voxels at a rate of 1.5 per minute. The scalability of digital material structures due to the incremental modular assembly is one of its key traits and an important metric of interest. We investigate the build times of a 5x5 beam structure on the scale of 1 meter (325 parts), 10 meters (3,250 parts), and 30 meters (9,750 parts). Utilizing the current configuration with a single end effector, performing serial assembly with a globally fixed feed station at the edge of the build volume, the build time increases according to a scaling law of n4, where n is the build scale. Build times can be reduced significantly by integrating feed systems into the gantry itself, resulting in a scaling law of n3. A completely serial assembly process will encounter time limitations as build scale increases. Automated assembly for digital materials can assemble high performance structures from discrete parts, and techniques such as built in feed systems, parallelization, and optimization of the fastening process will yield much higher throughput.

  14. Robotically Assembled Aerospace Structures: Digital Material Assembly using a Gantry-Type Assembler

    NASA Technical Reports Server (NTRS)

    Trinh, Greenfield; Copplestone, Grace; O'Connor, Molly; Hu, Steven; Nowak, Sebastian; Cheung, Kenneth; Jenett, Benjamin; Cellucci, Daniel

    2017-01-01

    This paper evaluates the development of automated assembly techniques for discrete lattice structures using a multi-axis gantry type CNC machine. These lattices are made of discrete components called "digital materials." We present the development of a specialized end effector that works in conjunction with the CNC machine to assemble these lattices. With this configuration we are able to place voxels at a rate of 1.5 per minute. The scalability of digital material structures due to the incremental modular assembly is one of its key traits and an important metric of interest. We investigate the build times of a 5x5 beam structure on the scale of 1 meter (325 parts), 10 meters (3,250 parts), and 30 meters (9,750 parts). Utilizing the current configuration with a single end effector, performing serial assembly with a globally fixed feed station at the edge of the build volume, the build time increases according to a scaling law of n4, where n is the build scale. Build times can be reduced significantly by integrating feed systems into the gantry itself, resulting in a scaling law of n3. A completely serial assembly process will encounter time limitations as build scale increases. Automated assembly for digital materials can assemble high performance structures from discrete parts, and techniques such as built in feed systems, parallelization, and optimization of the fastening process will yield much higher throughput.

  15. The safety and physiologic effects of the anticoccidial drugs monensin and clazuril in sandhill cranes (Grus canadensis)

    USGS Publications Warehouse

    Carpenter, J.W.; Novilla, M.N.; Hatfield, J.S.

    1992-01-01

    Because crane chick mortality from disseminated visceral coccidiosis (DVC) at the Patuxent Wildlife Research Center increased in 1988, suggesting that the parasite may be developing a resistance to amprolium, a target animal safety study using coccidiostats, monensin and clazuril, was conducted on 27 subadult sandhill cranes.

  16. Microbial water quality during the northern migration of Sandhill Cranes (Grus canadensis) at the central Platte River, Nebraska

    USGS Publications Warehouse

    Moser, Matthew T.

    2014-01-01

    The central Platte River is an important resource in Nebraska. Its water flows among multiple channels and supports numerous beneficial uses such as drinking water, irrigation for agriculture, groundwater recharge, and recreational activities. The central Platte River valley is an important stopover for migratory waterfowl and cranes, such as the Whooping (Grus americana) and Sandhill Cranes (Grus canadensis), in their annual northward traversal of the Central Flyway. Waterfowl, cranes, and other migratory birds moving across international and intercontinental borders may provide long-range transportation for any microbial pathogen they harbor, particularly through the spread of feces. Samples were collected weekly in the study reach from three sites (upstream, middle, and downstream from the roosting locations) during the spring of 2009 and 2010. The samples were analyzed for avian influenza, Escherichia coli, Cryptosporidium, Giardia, Campylobacter, and Legionella. Analysis indicates that several types of fecal indicator bacteria and a range of viral, protozoan, and bacterial pathogens were present in Sandhill Crane excreta. These bacteria and pathogens were present at a significantly higher frequency and densities in water and sediments when the Sandhill Cranes were present, particularly during evening roosts within the Platte River environment.

  17. 1. Distant view of mill ruins with boom crane for ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Distant view of mill ruins with boom crane for unloading sugar cane in foreground, looking W. - Laurel Valley Sugar Plantation, Sugar Mill, 2 miles South of Thibodaux on State Route 308, Thibodaux, Lafourche Parish, LA

  18. 32. SHAW BOX 5 TON CRANE, SANTA ANA RIVER NO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. SHAW BOX 5 TON CRANE, SANTA ANA RIVER NO. 3, JAN. 24, 1977. SCE drawing no. 455678-0. - Santa Ana River Hydroelectric System, SAR-3 Powerhouse, San Bernardino National Forest, Redlands, San Bernardino County, CA

  19. ERECTING/MACHINE SHOP, CRANE ACCESS GANGWAY BETWEEN ERECTING (L) AND MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ERECTING/MACHINE SHOP, CRANE ACCESS GANGWAY BETWEEN ERECTING (L) AND MACHINE (R) SHOPS, LOOKING NORTH. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

  20. Boiler Shop (Bldg. 152) 150ton Morgan bridge crane, looking west ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Boiler Shop (Bldg. 152) 150-ton Morgan bridge crane, looking west - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Boiler Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM