Science.gov

Sample records for gen iv materials

  1. Gen IV Materials Handbook Implementation Plan

    SciTech Connect

    Rittenhouse, P.; Ren, W.

    2005-03-29

    A Gen IV Materials Handbook is being developed to provide an authoritative single source of highly qualified structural materials information and materials properties data for use in design and analyses of all Generation IV Reactor Systems. The Handbook will be responsive to the needs expressed by all of the principal government, national laboratory, and private company stakeholders of Gen IV Reactor Systems. The Gen IV Materials Handbook Implementation Plan provided here addresses the purpose, rationale, attributes, and benefits of the Handbook and will detail its content, format, quality assurance, applicability, and access. Structural materials, both metallic and ceramic, for all Gen IV reactor types currently supported by the Department of Energy (DOE) will be included in the Gen IV Materials Handbook. However, initial emphasis will be on materials for the Very High Temperature Reactor (VHTR). Descriptive information (e.g., chemical composition and applicable technical specifications and codes) will be provided for each material along with an extensive presentation of mechanical and physical property data including consideration of temperature, irradiation, environment, etc. effects on properties. Access to the Gen IV Materials Handbook will be internet-based with appropriate levels of control. Information and data in the Handbook will be configured to allow search by material classes, specific materials, specific information or property class, specific property, data parameters, and individual data points identified with materials parameters, test conditions, and data source. Details on all of these as well as proposed applicability and consideration of data quality classes are provided in the Implementation Plan. Website development for the Handbook is divided into six phases including (1) detailed product analysis and specification, (2) simulation and design, (3) implementation and testing, (4) product release, (5) project/product evaluation, and (6) product

  2. Gen IV Materials Handbook Functionalities and Operation

    SciTech Connect

    Ren, Weiju

    2009-12-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  3. New Materials for NGNP/Gen IV

    SciTech Connect

    Robert W. Swindeman; Douglas L. Marriott

    2009-12-18

    The bounding conditions were briefly summarized for the Next Generation Nuclear Plant (NGNP) that is the leading candidate in the Department of Energy Generation IV reactor program. Metallic materials essential to the successful development and proof of concept for the NGNP were identified. The literature bearing on the materials technology for high-temperature gas-cooled reactors was reviewed with emphasis on the needs identified for the NGNP. Several materials were identified for a more thorough study of their databases and behavioral features relative to the requirements ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NH.

  4. Modelling of advanced structural materials for GEN IV reactors

    NASA Astrophysics Data System (ADS)

    Samaras, M.; Hoffelner, W.; Victoria, M.

    2007-09-01

    The choice of suitable materials and the assessment of long-term materials damage are key issues that need to be addressed for the safe and reliable performance of nuclear power plants. Operating conditions such as high temperatures, irradiation and a corrosive environment degrade materials properties, posing the risk of very expensive or even catastrophic plant damage. Materials scientists are faced with the scientific challenge to determine the long-term damage evolution of materials under service exposure in advanced plants. A higher confidence in life-time assessments of these materials requires an understanding of the related physical phenomena on a range of scales from the microscopic level of single defect damage effects all the way up to macroscopic effects. To overcome lengthy and expensive trial-and-error experiments, the multiscale modelling of materials behaviour is a promising tool, bringing new insights into the fundamental understanding of basic mechanisms. This paper presents the multiscale modelling methodology which is taking root internationally to address the issues of advanced structural materials for Gen IV reactors.

  5. Critical Issues on Materials for Gen-IV Reactors

    SciTech Connect

    Caro, M; Marian, J; Martinez, E; Erhart, P

    2009-02-27

    Within the LDRD on 'Critical Issues on Materials for Gen-IV Reactors' basic thermodynamics of the Fe-Cr alloy and accurate atomistic modeling were used to help develop the capability to predict hardening, swelling and embrittlement using the paradigm of Multiscale Materials Modeling. Approaches at atomistic and mesoscale levels were linked to build-up the first steps in an integrated modeling platform that seeks to relate in a near-term effort dislocation dynamics to polycrystal plasticity. The requirements originated in the reactor systems under consideration today for future sources of nuclear energy. These requirements are beyond the present day performance of nuclear materials and calls for the development of new, high temperature, radiation resistant materials. Fe-Cr alloys with 9-12% Cr content are the base matrix of advanced ferritic/martensitic (FM) steels envisaged as fuel cladding and structural components of Gen-IV reactors. Predictive tools are needed to calculate structural and mechanical properties of these steels. This project represents a contribution in that direction. The synergy between the continuous progress of parallel computing and the spectacular advances in the theoretical framework that describes materials have lead to a significant advance in our comprehension of materials properties and their mechanical behavior. We took this progress to our advantage and within this LDRD were able to provide a detailed physical understanding of iron-chromium alloys microstructural behavior. By combining ab-initio simulations, many-body interatomic potential development, and mesoscale dislocation dynamics we were able to describe their microstructure evolution. For the first time in the case of Fe-Cr alloys, atomistic and mesoscale were merged and the first steps taken towards incorporating ordering and precipitation effects into dislocation dynamics (DD) simulations. Molecular dynamics (MD) studies of the transport of self-interstitial, vacancy and

  6. Gen IV Materials Handbook Beta Release for Structural and Functional Evaluation

    SciTech Connect

    Ren, Weiju; Luttrell, Claire

    2006-09-12

    Development of the Gen IV Materials Handbook is briefly summarized up to date. Current status of the Handbook website construction is described. The developed Handbook components and access control of the beta version are discussed for the present evaluation release. Detailed instructions and examples are given to provide guidance for evaluators to browse the constructed parts and use all the currently developed functionalities of the Handbook in evaluation.

  7. Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

    NASA Astrophysics Data System (ADS)

    Murty, K. L.; Charit, I.

    2008-12-01

    Generation-IV reactor design concepts envisioned thus far cater toward a common goal of providing safer, longer lasting, proliferation-resistant and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-IV reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses and extremely corrosive environment, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This paper presents a summary of various Gen-IV reactor concepts, with emphasis on the structural materials issues depending on the specific application areas. This paper also discusses the challenges involved in using the existing materials under both service and off-normal conditions. Tasks become increasingly complex due to the operation of various fundamental phenomena like radiation-induced segregation, radiation-enhanced diffusion, precipitation, interactions between impurity elements and radiation-produced defects, swelling, helium generation and so forth. Further, high temperature capability (e.g. creep properties) of these materials is a critical, performance-limiting factor. It is demonstrated that novel alloy and microstructural design approaches coupled with new materials processing and fabrication techniques may mitigate the challenges, and the optimum system performance may be achieved under much demanding conditions.

  8. Gen IV Materials Handbook Functionalities and Operation (4A) Handbook Version 4.0

    SciTech Connect

    Ren, Weiju

    2013-09-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  9. Gen IV Materials Handbook Functionalities and Operation (2B) Handbook Version 2.0

    SciTech Connect

    Ren, Weiju

    2011-08-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  10. Millimeter-Wave Thermal Analysis Development and Application to GEN IV Reactor Materials

    SciTech Connect

    Wosko, Paul; Sundram, S. K.

    2012-10-16

    New millimeter-wave thermal analysis instrumentation has been developed and studied for characterization of materials required for diverse fuel and structural needs in high temperature reactor environments such as the Next Generation Nuclear Plant (NGNP). A two-receiver 137 GHz system with orthogonal polarizations for anisotropic resolution of material properties has been implemented at MIT. The system was tested with graphite and silicon carbide specimens at temperatures up to 1300 ºC inside an electric furnace. The analytic and hardware basis for active millimeter-wave radiometry of reactor materials at high temperature has been established. Real-time, non contact measurement sensitivity to anisotropic surface emissivity and submillimeter surface displacement was demonstrated. The 137 GHz emissivity of reactor grade graphite (NBG17) from SGL Group was found to be low, ~ 5 %, in the 500 – 1200 °C range and increases by a factor of 2 to 4 with small linear grooves simulating fracturing. The low graphite emissivity would make millimeter-wave active radiometry a sensitive diagnostic of graphite changes due to environmentally induced stress fracturing, swelling, or corrosion. The silicon carbide tested from Ortek, Inc. was found to have a much higher emissivity at 137 GHz of ~90% Thin coatings of silicon carbide on reactor grade graphite supplied by SGL Group were found to be mostly transparent to millimeter-waves, increasing the 137 GHz emissivity of the coated reactor grade graphite to about ~14% at 1250 ºC.

  11. A Virtual Reality Framework to Optimize Design, Operation and Refueling of GEN-IV Reactors.

    SciTech Connect

    Rizwan-uddin; Nick Karancevic; Stefano Markidis; Joel Dixon; Cheng Luo; Jared Reynolds

    2008-04-23

    many GEN-IV candidate designs are currently under investigation. Technical issues related to material, safety and economics are being addressed at research laboratories, industry and in academia. After safety, economic feasibility is likely to be the most important crterion in the success of GEN-IV design(s). Lessons learned from the designers and operators of GEN-II (and GEN-III) reactors must play a vital role in achieving both safety and economic feasibility goals.

  12. The web-enabled database of JRC-EC, a useful tool for managing European Gen IV materials data

    NASA Astrophysics Data System (ADS)

    Over, H. H.; Dietz, W.

    2008-06-01

    Materials and document databases are important tools to conserve knowledge and experimental materials data of European R&D projects. A web-enabled application guarantees a fast access to these data. In combination with analysis tools the experimental data are used for e.g. mechanical design, construction and lifetime predictions of complex components. The effective and efficient handling of large amounts of generic and detailed materials data with regard to properties related to e.g. fabrication processes, joining techniques, irradiation or aging is one of the basic elements of data management within ongoing nuclear safety and design related European research projects and networks. The paper describes the structure and functionality of Mat-DB and gives examples how these tools can be used for the management and evaluation of materials data of European (national or multi-national) R&D activities or future reactor types such as the EURATOM FP7 Generation IV reactor types or the heavy liquid metals cooled reactor.

  13. GEN IV reactors: Where we are, where we should go

    SciTech Connect

    Locatelli, G.; Mancini, M.; Todeschini, N.

    2012-07-01

    GEN IV power plants represent the mid-long term option of the nuclear sector. International literature proposes many papers and reports dealing with these reactors, but there is an evident difference of type and shape of information making impossible each kind of detailed comparison. Moreover, authors are often strongly involved in some particular design; this creates many difficulties in their super-partes position. Therefore it is necessary to put order in the most relevant information to understand strengths and weaknesses of each design and derive an overview useful for technicians and policy makers. This paper presents the state-of the art for GEN IV nuclear reactors providing a comprehensive literature review of the different designs with a relate taxonomy. It presents the more relevant references, data, advantages, disadvantages and barriers to the adoptions. In order to promote an efficient and wide adoption of GEN IV reactors the paper provides the pre-conditions that must be accomplished, enabling factors promoting the implementation and barriers limiting the extent and intensity of its implementation. It concludes outlying the state of the art of the most important R and D areas and the future achievements that must be accomplished for a wide adoption of these technologies. (authors)

  14. Nuclear Data Needs for the Assessment of Gen IV Systems

    NASA Astrophysics Data System (ADS)

    Rimpault, Gerald

    2006-04-01

    Four of the six nuclear systems identified by the Gen-IV international forum are relying in fast reactors. The high performance required from these future FR's calls for very innovative core characteristics compared with conventional fast reactor designs, which in turns give rise to new challenges for the available neutronics methods and data. The ERANOS “formulaire” was developed for reliable, precise and efficient calculations of sodium-cooled fast neutron reactor cores. Such a “formulaire” enables the prediction of all the neutronic quantities of interest for reactor design, operation and safety studies, along with their corresponding uncertainties. Given its achievement in terms of accuracy for existing sodium cooled reactors, the way the ERANOS “formulaire” has been designed should be looked as an example for developing similar tools for GENIV fast cores. The methodology for defining nuclear data needs is briefly covered. Target accuracies for GEN-IV neutronic characteristics is an important point to start with. The covariance data is of significant importance for quantifying the needs and evaluators should provide them with their nuclear data. Hence, nuclear data requests should be associated to uncertainty values. Integral experiments have a complementary role to differential measurements for meeting some nuclear data needs (for instance Pu239 fission). High Priority Level Requests should include those nuclides accessible with current differential measurement technology and should include less important nuclides A list of potential requests is existing, quantifying their uncertainties remain a significant effort particularly when looking at fuel cycle quantities.

  15. Microstructure stability of candidate stainless steels for Gen-IV SCWR fuel cladding application

    NASA Astrophysics Data System (ADS)

    Li, Jian; Zheng, W.; Penttilä, S.; Liu, P.; Woo, O. T.; Guzonas, D.

    2014-11-01

    In the past few years, significant progress has been made in materials selection for Gen-IV SCWR fuel cladding applications. Current studies indicate that austenite stainless steels such as 310H are promising candidates for in-core applications. Alloys in this group are promising for their corrosion resistance, SCC resistance, high temperature mechanical properties and creep resistance at temperatures up to 700 °C. However, one under-studied area of this alloy is the long-term microstructure stability under the proposed reactor operating condition. Unstable microstructure not only results in embrittlement but also has the potential to reduce their resistance to corrosion or stress-corrosion cracking. In this study, stainless steels 310H and 304H were tested for their SCWR corrosion resistance and microstructure stability.

  16. Phase Stability under Irradiation of Precipitates and Solid Solutions in Model ALloys and in ODS Alloys Relevant for Gen IV

    SciTech Connect

    Arthur T. Motta; Robert C. Birtcher

    2007-10-17

    The overall objective of this program is to investigate the irradiation-altered phase stability of oxide precipitates in ODS steels and of model alloy solid solutions of associated systems. This information can be used to determine whether the favorable mechanical propertiies of these steels are maintained under irradiation, thus addressing one of the main materials research issues for this class of steels as identified by the GenIV working groups. The research program will also create fundamental understanding of the irradiation precipitation/dissolution problem by studying a "model" system in which the variables can be controlled and their effects understood individually.

  17. Thermal stability study for candidate stainless steels of GEN IV reactors

    NASA Astrophysics Data System (ADS)

    Simeg Veternikova, J.; Degmova, J.; Pekarcikova, M.; Simko, F.; Petriska, M.; Skarba, M.; Mikula, P.; Pupala, M.

    2016-11-01

    Candidate stainless steels for GEN IV reactors were investigated in term of thermal and corrosion stability at high temperatures. New austenitic steel (NF 709), austenitic ODS steel (ODS 316) and two ferritic ODS steels (MA 956 and MA 957) were exposed to around 1000 °C in inert argon atmosphere at pressure of ∼8 MPa. The steels were further studied in a light of vacancy defects presence by positron annihilation spectroscopy and their thermal resistance was confronted to classic AISI steels. The thermal strain supported a creation of oxide layers observed by scanning electron microscopy (SEM).

  18. Irradiation effects in oxide dispersion strengthened (ODS) Ni-base alloys for Gen. IV nuclear reactors

    NASA Astrophysics Data System (ADS)

    Oono, Naoko; Ukai, Shigeharu; Kondo, Sosuke; Hashitomi, Okinobu; Kimura, Akihiko

    2015-10-01

    Oxide particle dispersion strengthened (ODS) Ni-base alloys are irradiated by using simulation technique (Fe/He dual-ion irradiation) to investigate the reliability to Gen. IV high-temperature reactors. The fine oxide particles with less than 10 nm in average size and approximately 8.0 × 1022 m-3 in number density remained after 101 dpa irradiation. The tiny helium bubbles were inside grains, not at grain-boundaries; it is advantageous effect of oxide particles which trap the helium atoms at the particle-matrix interface. Ni-base ODS alloys demonstrated their great ability to overcome He embrittlement.

  19. Progress reports for Gen IV sodium fast reactor activities FY 2007.

    SciTech Connect

    Cahalan, J. E.; Tentner, A. M.; Nuclear Engineering Division

    2007-10-04

    for prevention of progression into severe accident conditions (prevention of core melting) or for mitigation of severe accident consequences (mitigation of the impact of core melting to protect public health and safety). Because design measures for severe accident prevention and mitigation are beyond the normal design basis, established regulatory guidelines and codes do not provide explicit identification of the design performance requirements for severe accident accommodation. The treatment of severe accidents is one of the key issues of R&D plans for the Gen IV systems in general, and for the Sodium Fast Reactor (SFR) in particular. Despite the lack of an unambiguous definition of safety approach applicable for severe accidents, there is an emerging consensus on the need for their consideration for the design. The US SFR program and Argonne National Laboratory (ANL) in particular have actively studied the potential scenarios and consequences of Hypothetical Core Disruptive Accidents (HCDA) for SFRs with oxide fuel during the Fast Flux Test Facility (FFTF) and Clinch River Breeder Reactor Plant (CRBRP) programs in the 70s and 80s. Later, the focus of the US SFR safety R&D activities shifted to the prevention of all HCDAs through passive safety features of the SFRs with metal fuel in the Integral Fast Reactor (IFR) program, and the study of severe accident consequences was de-emphasized. The goal of this paper is to provide an overview of the current SFR safety approach and the role of severe accidents in Japan and France, in preparation for an expected and more active collaboration in this area between the US, Japan, and France.

  20. Decay Heat Removal in GEN IV Gas-Cooled Fast Reactors

    DOE PAGESBeta

    Cheng, Lap-Yan; Wei, Thomas Y. C.

    2009-01-01

    The safety goal of the current designs of advanced high-temperature thermal gas-cooled reactors (HTRs) is that no core meltdown would occur in a depressurization event with a combination of concurrent safety system failures. This study focused on the analysis of passive decay heat removal (DHR) in a GEN IV direct-cycle gas-cooled fast reactor (GFR) which is based on the technology developments of the HTRs. Given the different criteria and design characteristics of the GFR, an approach different from that taken for the HTRs for passive DHR would have to be explored. Different design options based on maintaining core flow weremore » evaluated by performing transient analysis of a depressurization accident using the system code RELAP5-3D. The study also reviewed the conceptual design of autonomous systems for shutdown decay heat removal and recommends that future work in this area should be focused on the potential for Brayton cycle DHRs.« less

  1. Emergency Decay Heat Removal in a GEN-IV Gas-Cooled Fast Reactor

    SciTech Connect

    Cheng, Lap Y.; Ludewig, Hans; Jo, Jae

    2006-07-01

    A series of transient analyses using the system code RELAP5-3d has been performed to confirm the efficacy of a proposed hybrid active/passive combination approach to the decay heat removal for an advanced 2400 MWt GEN-IV gas-cooled fast reactor. The accident sequence of interest is a station blackout simultaneous with a small break (10 sq.inch/0.645 m{sup 2}) in the reactor vessel. The analyses cover the three phases of decay heat removal in a depressurization accident: (1) forced flow cooling by the power conversion unit (PCU) coast down, (2) active forced flow cooling by a battery powered blower, and (3) passive cooling by natural circulation. The blower is part of an emergency cooling system (ECS) that by design is to sustain passive decay heat removal via natural circulation cooling 24 hours after shutdown. The RELAP5 model includes the helium-cooled reactor, the ECS (primary and secondary side), the PCU with all the rotating machinery (turbine and compressors) and the heat transfer components (recuperator, pre-cooler and inter-cooler), and the guard containment that surrounds the reactor and the PCU. The transient analysis has demonstrated the effectiveness of passive decay heat removal by natural circulation cooling when the guard containment pressure is maintained at or above 800 kPa. (authors)

  2. Generation IV Reactors Integrated Materials Technology Program Plan: Focus on Very High Temperature Reactor Materials

    SciTech Connect

    Corwin, William R; Burchell, Timothy D; Katoh, Yutai; McGreevy, Timothy E; Nanstad, Randy K; Ren, Weiju; Snead, Lance Lewis; Wilson, Dane F

    2008-08-01

    Since 2002, the Department of Energy's (DOE's) Generation IV Nuclear Energy Systems (Gen IV) Program has addressed the research and development (R&D) necessary to support next-generation nuclear energy systems. The six most promising systems identified for next-generation nuclear energy are described within this roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor-SCWR and the Very High Temperature Reactor-VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor-GFR, the Lead-cooled Fast Reactor-LFR, and the Sodium-cooled Fast Reactor-SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides and may provide an alternative to accelerator-driven systems. At the inception of DOE's Gen IV program, it was decided to significantly pursue five of the six concepts identified in the Gen IV roadmap to determine which of them was most appropriate to meet the needs of future U.S. nuclear power generation. In particular, evaluation of the highly efficient thermal SCWR and VHTR reactors was initiated primarily for energy production, and evaluation of the three fast reactor concepts, SFR, LFR, and GFR, was begun to assess viability for both energy production and their potential contribution to closing the fuel cycle. Within the Gen IV Program itself, only the VHTR class of reactors was selected for continued development. Hence, this document will address the multiple activities under the Gen IV program that contribute to the development of the VHTR. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of the structural

  3. Flexible Fuel Cycle Initiative for the Harmonized Deployment of Gen-IV Reactors

    NASA Astrophysics Data System (ADS)

    Fukasawa, Tetsuo; Yamashita, Junichi; Hoshino, Kuniyoshi; Fujimura, Koji; Sasahira, Akira

    Generation IV type fast reactors (FR) are expected to be commercially deployed instead of light water reactors (LWR) from around 2050. Replacement of LWR to FR needs flexibility due to uncertain factors such as FR deployment rate which affects the FR fuel (Pu) supply amount from LWR spent fuel reprocessing and the capacity of related facilities. If the FR deployment rate is as currently planned, more Pu must be prepared by expanding LWR reprocessing. If the FR deployment rate decreases, LWR reprocessing must be reduced to avoid excess Pu. To cope with this issue we proposed the innovative system called Flexible Fuel Cycle Initiative (FFCI) that has integral reprocessing for LWR and FR spent fuels. LWR reprocessing in FFCI only carries out about 90% U recovery and residual material with Pu, U (˜5%), minor actinides (MA) and fission products (FP) goes to FR reprocessing for the planned FR deployment rate. For any decrease in the FR deployment rate temporary storage will be used. Coexistence of Pu/U with MA and FP until just before Pu/U usage in the FR provides high proliferation resistance. Preliminary evaluation revealed that FFCI can reduce the LWR reprocessing capacity and LWR spent fuel storage amount compared with current plan (reference system) if the FR deployment rate decreases. Several FR deployment scenarios and countermeasures such as FFCI were investigated.

  4. Alternative Approaches to Group IV Thermoelectric Materials

    NASA Astrophysics Data System (ADS)

    Snedaker, Matthew Loren

    In the pursuit of energy efficiency, there is a demand for systems capable of recovering waste heat. A temperature gradient across a thermoelectric material results in the thermal diffusion of charge carriers from the hot side to the cold side, giving rise to a voltage that can be used to convert waste heat to electricity. Silicon germanium (SiGe) alloys are the standard materials used for thermoelectric generators at high temperatures. We report an alternative method for preparing p-type Si1- xGex alloys from a boron-doped silica-germania nanocomposite. This is the first demonstration of the thermoelectric properties of SiGe-based thermoelectrics prepared at temperatures below the alloy's melting point through a magnesiothermic reduction of the (SiO 2)1-x(GeO2) x. We observe a thermoelectric power factor that is competitive with the literature record for the conventionally prepared SiGe. The large grain size in our hot pressed SiGe limits the thermoelectric figure of merit to 0.5 at 800°C for an optimally doped p-type Si80Ge 20 alloy. A phosphorus-doped oxide can yield n-type Si1- xGex; however, the current processing method introduces a background boron content that compensates ~10% of the donor impurities and limits the thermoelectric power factor. Spark plasma sintering of the nano-Si1-xGe x yields a heterogeneous alloy with thermal conductivity lower than that of the hot pressed homogeneous alloy due to a reduction in the average crystallite size. Magnesiothermic reduction in the presence of molten salts allows some control over crystallite growth and the extent of Si-Ge alloying.

  5. Updated Generation IV Reactors Integrated Materials Technology Program Plan, Revision 2

    SciTech Connect

    Corwin, William R; Burchell, Timothy D; Halsey, William; Hayner, George; Katoh, Yutai; Klett, James William; McGreevy, Timothy E; Nanstad, Randy K; Ren, Weiju; Snead, Lance Lewis; Stoller, Roger E; Wilson, Dane F

    2005-12-01

    The Department of Energy's (DOE's) Generation IV Nuclear Energy Systems Program will address the research and development (R&D) necessary to support next-generation nuclear energy systems. Such R&D will be guided by the technology roadmap developed for the Generation IV International Forum (GIF) over two years with the participation of over 100 experts from the GIF countries. The roadmap evaluated over 100 future systems proposed by researchers around the world. The scope of the R&D described in the roadmap covers the six most promising Generation IV systems. The effort ended in December 2002 with the issue of the final Generation IV Technology Roadmap [1.1]. The six most promising systems identified for next generation nuclear energy are described within the roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor - SCWR and the Very High Temperature Reactor - VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor - GFR, the Lead-cooled Fast Reactor - LFR, and the Sodium-cooled Fast Reactor - SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides, and may provide an alternative to accelerator-driven systems. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of the structural materials needed to ensure their safe and reliable operation. Accordingly, DOE has identified materials as one of the focus areas for Gen IV technology development.

  6. Foreign Trip Report MATGEN-IV Sep 24- Oct 26, 2007

    SciTech Connect

    de Caro, M S

    2007-10-30

    Gen-IV activities in France, Japan and US focus on the development of new structural materials for Gen-IV nuclear reactors. Oxide dispersion strengthened (ODS) F/M steels have raised considerable interest in nuclear applications. Promising collaborations can be established seeking fundamental knowledge of relevant Gen-IV ODS steel properties (see attached travel report on MATGEN- IV 'Materials for Generation IV Nuclear Reactors'). Major highlights refer to results on future Ferritic/Martensitic steel cladding candidates (relevant to Gen-IV materials properties for LFR Materials Program) and on thermodynamic and mechanic behavior of metallic FeCr binary alloys, base matrix for future candidate steels (for the LLNL-LDRD project on Critical Issues on Materials for Gen-IV Reactors).

  7. Tritium Sequestration in Gen IV NGNP Gas Stream via Proton Conducting Ceramic Pumps

    SciTech Connect

    Chen, Fanglin Frank; Adams, Thad M.; Brinkman, Kyle; Reifsnider, Kenneth

    2011-09-30

    Several types of high-temperature proton conductors based on SrCeO3 and BaCeO3 have been systematically investigated in this project for tritium separation in NGNP applications. One obstacle for the field application is the chemical stability issues in the presence of steam and CO2 for these proton conductors. Several strategies to overcome such issues have been evaluated, including A site doping and B site co-doping method for perovskite-structured proton conductors. Novel zirconium-free proton conductors have also been developed with improved electrical conductivity and enhanced chemical stability. Novel catalytic materials for the proton-conducting separation membranes have been investigated. A tubular geometry proton-conducting membrane has been developed for the proton separation membranes. Total dose rate estimated from tritium decay (beta emission) under realistic membrane operating conditions, combined with electron irradiation experiments, indicates that proton ceramic materials possess the appropriate radiation stability for this application.

  8. The evaluation of the pyrochemistry for the treatment of Gen IV nuclear fuels Inert matrix chlorination studies in the gas phase or molten chloride salts

    NASA Astrophysics Data System (ADS)

    Bourg, S.; Péron, F.; Lacquement, J.

    2007-01-01

    The structure of the fuels for the future Gen IV nuclear reactors will be totally different from those of PWR, especially for the GFR concept including a closed cycle. In these reactors, fissile materials (carbides or nitrides of actinides) should be surrounded by an inert matrix. In order to build a reprocessing process scheme, the behavior of the potential inert matrices (silicon carbide, titanium nitride, and zirconium carbide and nitride) was studied by hydro- and pyrometallurgy. This paper deals with the chlorination results at high temperature by pyrometallurgy. For the first time, the reactivity of the matrix towards chlorine gas was assessed in the gas phase. TiN, ZrN and ZrC are very reactive from 400 °C whereas it is necessary to be over 900 °C for SiC to be as fast. In molten chloride melts, the bubbling of chlorine gas is less efficient than in gas phase but it is possible to attack the matrices. Electrochemical methods were also used to dissolve the refractory materials, leading to promising results with TiN, ZrN and ZrC. The massive SiC samples used were not conductive enough to be studied and in this case specific SiC-coated carbon electrodes were used. The key point of these studies was to find a method to separate the matrix compounds from the fissile material in order to link the head to the core of the process (electrochemical separation or liquid-liquid reductive extraction in the case of a pyrochemical reprocessing).

  9. Fusion-fission hybrids for nuclear waste transmutation : a synergistic step between Gen-IV fission and fusion reactors.

    SciTech Connect

    Olson, Craig Lee; Mehlhorn, Thomas Alan; Cipiti, Benjamin B.; Rochau, Gary Eugene

    2007-09-01

    Energy demand and GDP per capita are strongly correlated, while public concern over the role of energy in climate change is growing. Nuclear power plants produce 16% of world electricity demands without greenhouse gases. Generation-IV advanced nuclear energy systems are being designed to be safe and economical. Minimizing the handling and storage of nuclear waste is important. NIF and ITER are bringing sustainable fusion energy closer, but a significant gap in fusion technology development remains. Fusion-fission hybrids could be a synergistic step to a pure fusion economy and act as a technology bridge. We discuss how a pulsed power-driven Z-pinch hybrid system producing only 20 MW of fusion yield can drive a sub-critical transuranic blanket that transmutes 1280 kg of actinide wastes per year and produces 3000 MW. These results are applicable to other inertial and magnetic fusion energy systems. A hybrid system could be introduced somewhat sooner because of the modest fusion yield requirements and can provide both a safe alternative to fast reactors for nuclear waste transmutation and a maturation path for fusion technology. The development and demonstration of advanced materials that withstand high-temperature, high-irradiation environments is a fundamental technology issue that is common to both fusion-fission hybrids and Generation-IV reactors.

  10. A Qualitative Assessment of Diversion Scenarios for an Example Sodium Fast Reactor Using the GEN IV PR&PP Methodology

    SciTech Connect

    Zentner, Michael D.; Coles, Garill A.; Therios, Ike

    2012-01-20

    FAST REACTORS;NUCLEAR ENERGY;NUCLEAR MATERIALS MANAGEMENT;PROLIFERATION;SAFEGUARDS;THEFT; A working group was created in 2002 by the Generation IV International Forum (GIF) for the purpose of developing an internationally accepted methodology for assessing the Proliferation Resistance of a nuclear energy system (NES) and its individual elements. A two year case study is being performed by the experts group using this methodology to assess the proliferation resistance of a hypothetical NES called the Example Sodium Fast Reactor (ESFR). This work demonstrates how the PR and PP methodology can be used to provide important information at various levels of details to NES designers, safeguard administrators and decision makers. The study analyzes the response of the complete ESFR nuclear energy system to different proliferation and theft strategies. The challenges considered include concealed diversion, concealed misuse and 'break out' strategies. This paper describes the work done in performing a qualitative assessment of concealed diversion scenarios from the ESFR.

  11. An EBSD investigation on flow localization and microstructure evolution of 316L stainless steel for Gen IV reactor applications

    NASA Astrophysics Data System (ADS)

    Wu, Xianglin; Pan, Xiao; Mabon, James C.; Li, Meimei; Stubbins, James F.

    2007-09-01

    Type 316L stainless steel has been selected as a candidate structural material in a series of current accelerator driven systems and Generation IV reactor conceptual designs. The material is sensitive to irradiation damage in the temperature range of 150-400 °C: even low levels of irradiation exposure, as small as 0.1 dpa, can cause severe loss of ductility during tensile loading. This process, where the plastic flow becomes highly localized resulting in extremely low overall ductility, is referred as flow localization. The process controlling this confined flow is related to the difference between the yield and ultimate tensile strengths such that large irradiation-induced increases in the yield strength result in very limited plastic flow leading to necking after very small levels of uniform elongation. In this study, the microstructural evolution controlling flow localization is examined. It is found that twinning is an important deformation mechanism at lower temperatures since it promotes the strain hardening process. At higher temperatures, twinning becomes energetically impossible since the activation of twinning is determined by the critical twinning stress, which increases rapidly with temperature. Mechanical twinning and dislocation-based planar slip are competing mechanisms for plastic deformation.

  12. Analysis of cadmium in undissolved anode materials of Mark-IV electro-refiner

    SciTech Connect

    Yoo, Tae-Sic; Fredrickson, G.L.; Vaden, D.; Westphal, B.

    2013-07-01

    The Mark-IV electro-refiner (Mk-IV ER) is a unit process in the FCF (Fuel Conditioning Facility), which is primarily assigned to treating the used driver fuels. Mk-IV ER contains an electrolyte/molten cadmium system for refining uranium electrochemically. Typically, the anode of the Mk-IV ER consists of the chopped sodium-bonded metallic driver fuels, which have been primarily U-10Zr binary fuels. Chemical analysis of the residual anode materials after electrorefining indicates that a small amount of cadmium is removed from the Mk-IV ER along with the undissolved anode materials. Investigation of chemical analysis data indicates that the amount of cadmium in the undissolved anode materials is strongly correlated with the anode rotation speeds and the residence time of the anode in the Mk-IV ER. Discussions are given to explain the prescribed correlation. (authors)

  13. Analysis of Cadmium in Undissolved Anode Materials of Mark-IV Electrorefiner

    SciTech Connect

    Tae-Sic Yoo; Guy L. Fredrickson; DeeEarl Vaden; Brian R. Westphal

    2013-10-01

    The Mark-IV electrorefiner (Mk-IV ER) contains an electrolyte/molten cadmium system for refining uranium electrochemically. Typically, the anode of the Mk-IV ER consists of the chopped sodium-bonded metallic driver fuels, which have been primarily U-10Zr binary fuels. Chemical analysis of the residual anode materials after electrorefining indicates that a small amount of cadmium is removed from the Mk-IV ER along with the undissolved anode materials. Investigation of chemical analysis data indicates that the amount of cadmium in the undissolved anode materials is strongly correlated with the anode rotation speeds and the residence time of the anode in the Mk-IV ER. Discussions are given to explain the prescribed correlation.

  14. Plumbing Specialist IV & V, 3-23. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    These military-developed curriculum materials consist of a course description, course chart, plan of instruction, lesson plans, study guides, and workbooks for use in training plumbing specialists IV and V. Covered in the course blocks are fixtures and appurtenances and utility equipment. Block IV on fixtures and appurtenances deals with…

  15. End of Project Report. Volume IV, Center Instructional Material.

    ERIC Educational Resources Information Center

    Maine Township Diagnostic and Remedial Learning Center, Park Ridge, IL.

    Reported are the results of an inservice diagnostic demonstration center for children with learning problems. Information is provided on testing materials, referral interviews, a survey of reading disabilities, an instructional materials listing, a professional bibliography, descriptions of remediation material, and a parent survey. Also included…

  16. Core IV Materials for Metropolitan Agriculture/Horticulture Programs.

    ERIC Educational Resources Information Center

    Hemp, Paul; And Others

    This core curriculum guide consists of materials for use in presenting a 13-unit vocational agriculture course geared toward high school students living in metropolitan areas. Addressed in the individual units of the course are the following topics: employment in agricultural occupations, supervised occupational experience, leadership in…

  17. Multi-scale approach to the modeling of fission gas discharge during hypothetical loss-of-flow accident in gen-IV sodium fast reactor

    SciTech Connect

    Behafarid, F.; Shaver, D. R.; Bolotnov, I. A.; Jansen, K. E.; Antal, S. P.; Podowski, M. Z.

    2012-07-01

    The required technological and safety standards for future Gen IV Reactors can only be achieved if advanced simulation capabilities become available, which combine high performance computing with the necessary level of modeling detail and high accuracy of predictions. The purpose of this paper is to present new results of multi-scale three-dimensional (3D) simulations of the inter-related phenomena, which occur as a result of fuel element heat-up and cladding failure, including the injection of a jet of gaseous fission products into a partially blocked Sodium Fast Reactor (SFR) coolant channel, and gas/molten sodium transport along the coolant channels. The computational approach to the analysis of the overall accident scenario is based on using two different inter-communicating computational multiphase fluid dynamics (CMFD) codes: a CFD code, PHASTA, and a RANS code, NPHASE-CMFD. Using the geometry and time history of cladding failure and the gas injection rate, direct numerical simulations (DNS), combined with the Level Set method, of two-phase turbulent flow have been performed by the PHASTA code. The model allows one to track the evolution of gas/liquid interfaces at a centimeter scale. The simulated phenomena include the formation and breakup of the jet of fission products injected into the liquid sodium coolant. The PHASTA outflow has been averaged over time to obtain mean phasic velocities and volumetric concentrations, as well as the liquid turbulent kinetic energy and turbulence dissipation rate, all of which have served as the input to the core-scale simulations using the NPHASE-CMFD code. A sliding window time averaging has been used to capture mean flow parameters for transient cases. The results presented in the paper include testing and validation of the proposed models, as well the predictions of fission-gas/liquid-sodium transport along a multi-rod fuel assembly of SFR during a partial loss-of-flow accident. (authors)

  18. Hydrogen-bond Specific Materials Modification in Group IV Semiconductors

    SciTech Connect

    Tolk, Norman H.; Feldman, L. C.; Luepke, G.

    2015-09-14

    Executive summary Semiconductor dielectric crystals consist of two fundamental components: lattice atoms and electrons. The former component provides a crystalline structure that can be disrupted by various defects or the presence of an interface, or by transient oscillations known as phonons. The latter component produces an energetic structure that is responsible for the optical and electronic properties of the material, and can be perturbed by lattice defects or by photo-excitation. Over the period of this project, August 15, 1999 to March 31, 2015, a persistent theme has been the elucidation of the fundamental role of defects arising from the presence of radiation damage, impurities (in particular, hydrogen), localized strain or some combination of all three. As our research effort developed and evolved, we have experienced a few title changes, which reflected this evolution. Throughout the project, ultrafast lasers usually in a pump-probe configuration provided the ideal means to perturb and study semiconductor crystals by both forms of excitation, vibrational (phonon) and electronic (photon). Moreover, we have found in the course of this research that there are many interesting and relevant scientific questions that may be explored when phonon and photon excitations are controlled separately. Our early goals were to explore the dynamics of bond-selective vibrational excitation of hydrogen from point defects and impurities in crystalline and amorphous solids, initiating an investigation into the behavior of hydrogen isotopes utilizing a variety of ultrafast characterization techniques, principally transient bleaching spectroscopy to experimentally obtain vibrational lifetimes. The initiative could be divided into three related areas: (a) investigation of the change in electronic structure of solids due to the presence of hydrogen defect centers, (b) dynamical studies of hydrogen in materials and (c) characterization and stability of metastable hydrogen

  19. Me and My Environment. Unit IV: Transfer and Cycling of Materials in My Environment.

    ERIC Educational Resources Information Center

    Biological Sciences Curriculum Study, Boulder, CO.

    Presented is the experimental edition of Unit IV: Transfer and Cycling of Materials in My Environment, which consists of 29 life science curriculum activities intended for the 13-to-15-year-old educable mentally retarded child. The curriculum guide is being used in the final field test prior to revision. Stressed throughout the program are…

  20. Project NECESSITIES, Phase III. Volume IV: Teaching Materials for Kindergarten and First Grade.

    ERIC Educational Resources Information Center

    Abt Associates, Inc., Cambridge, MA.

    Phase III, Volume IV, Part A of Project NECESSITIES consists of 10 activities intended for kindergarten-aged American Indian (including Eskimo) children. Some of the supplementary materials needed to teach these activities ("Symbol Formation" and "An Animal Alphabet") are appended. The unit, entitled Learning to Communicate, begins with non-verbal…

  1. Use of temporary filling material for index fabrication in Class IV resin composite restoration.

    PubMed

    Kim, Kun-Young; Kim, Sun-Young; Kim, Duck-Su; Choi, Kyoung-Kyu

    2013-05-01

    When a patient with a fractured anterior tooth visits the clinic, clinician has to restore the tooth esthetically and quickly. For esthetic resin restoration, clinician can use 'Natural Layering technique' and an index for palatal wall may be needed. In this case report, we introduce pre-restoration index technique on a Class IV defect, in which a temporary filling material is used for easy restoration. Chair-side index fabrication for Class IV restoration is convenient and makes a single-visit treatment possible.

  2. Type IV kerogens as analogues for organic macromolecular materials in aqueously altered carbonaceous chondrites.

    PubMed

    Matthewman, Richard; Martins, Zita; Sephton, Mark A

    2013-04-01

    Understanding the processes involved in the evolution of organic matter in the early Solar System requires extensive experimental work. The scientifically valuable carbonaceous chondrites are principal targets for organic analyses, but these meteorites are rare. Meteoritic analog materials available in larger quantities, on which experiments can be performed, would be highly beneficial. The bulk of the organic inventory of carbonaceous chondrites is made up of solvent-insoluble macromolecular material. This high-molecular-weight entity provides a record of thermal and aqueous parent-body alteration of precursor organic structures present at the birth of the Solar System. To identify an effective analogue for this macromolecular material, we analyzed a series of terrestrial kerogens by pyrolysis-gas chromatography-mass spectrometry. Type I and II kerogens are unsuitable analogues owing to their highly aliphatic nature. Type III kerogens show some similarities to meteoritic macromolecular materials but display a substantial biological heritage. Type IV kerogens, in this study derived from Mesozoic paleosols and produced by the reworking and oxidation of organic matter, represent an effective analogue. Some isomeric differences exist between meteoritic macromolecular materials and type IV kerogens, and stepped pyrolysis indicates variations in thermal stability. In addition to being a suitable material for novel experimentation, type IV kerogens also have the potential to aid in the optimization of instruments for deployment on Mars. PMID:23551239

  3. Structural and thermochemical Aspects of (III-V)IV3 Material Assembly from First Principles

    NASA Astrophysics Data System (ADS)

    Chizmeshya, Andrew; Kouvetakis, John

    2014-03-01

    Alloys with (III-V)-(IV) compositions, including Si3(AlP), Si5-2y(AlP)y, Si3Al(As1-xNx), Si5-2yAl(P1-xNx)y and Ge5-2y(InP)y and have recently been synthesized as mono-crystalline films on Si substrates, using a synthesis route specifically designed to avoid phase separation between the III-V and IV constituents. Molecular ``building blocks'' containing group-V-centered III-V-IV3 cores, formed via interactions of group-III atoms and reactive silyly/germyl hydride precursors of desired composition (e.g, P(SiH3)3 , P(GeH3)3 , etc), assemble to form stable, covalent, diamond-like materials with the inherent tetrahedral symmetry and composition of the III-V-IV3 units. The resulting systems may provide access to a broad range of new semiconductor systems with extended optoelectronic properties, provided that the required molecular sources are available, the thermodynamic processes are viable, and the resulting alloy composition can be tuned to lattice-match the growth substrate. Molecular/solid-state simulations are used to identify promising synthetic pathways and guide the epitaxial creation of new (III-V)-(IV) materials. The thermodynamics of gas phase synthesis reactions, energetic stability of the alloys, and their epitaxial/chemical compatibility with the substrate are combined to form a global figure of merit. The latter corroborates the synthesis of known systems and predicts that formation of GaPSi3/Si(100), GaAsSi3/SiGe(100), AlPGe3/Ge(100) and InAsSi3/Ge(100) may also be favorable. Supported by NSF-DMR under SusChEM award #1309090.

  4. A programmable high voltage electrical switching analyzer for I-V characterization of phase change materials

    NASA Astrophysics Data System (ADS)

    Bhanu Prashanth, S. B.; Asokan, S.

    2007-07-01

    Ovonic Phase-Change Materials have found a renewed interest in the recent times owing to their applications in Non-Volatile Random Access Memories. In the present work, a cost-effective high voltage electrical switching analyzer has been developed to enable investigations on the I-V characteristics and electrical switching of bulk solids, which are necessary for identifying suitable materials for memory and other applications such as power control. The developed set up mainly consists of a PC based programmable High Voltage DC Power Supply which acts as an excitation source and a high speed Digital Storage Oscilloscope. For flexible control options, a Graphical User Interface has also been developed using LabVIEW-6i to control the excitation source through the analog outputs of a data acquisition card. Options are made in the system to sweep the output voltage from 45 to 1750 V or the output current in the range 0-45 mA with resolutions of 1.5 V & 5 or 50 μA at variable rates. I-V characteristics and switching behavior of the sample material are instantaneously acquired on the storage oscilloscope and transferred to PC for post processing. The system can be used to investigate a broad range of materials and some typical results are presented to illustrate the capability of the system developed. The closed-loop stability of the system has also been confirmed by frequency response plots.

  5. High-efficient thermoelectric materials: The case of orthorhombic IV-VI compounds.

    PubMed

    Ding, Guangqian; Gao, Guoying; Yao, Kailun

    2015-01-01

    Improving the thermoelectric efficiency is one of the greatest challenges in materials science. The recent discovery of excellent thermoelectric performance in simple orthorhombic SnSe crystal offers new promise in this prospect [Zhao et al. Nature 508, 373 (2014)]. By calculating the thermoelectric properties of orthorhombic IV-VI compounds GeS,GeSe,SnS, and SnSe based on the first-principles combined with the Boltzmann transport theory, we show that the Seebeck coefficient, electrical conductivity, and thermal conductivity of orthorhombic SnSe are in agreement with the recent experiment. Importantly, GeS, GeSe, and SnS exhibit comparative thermoelectric performance compared to SnSe. Especially, the Seebeck coefficients of GeS, GeSe, and SnS are even larger than that of SnSe under the studied carrier concentration and temperature region. We also use the Cahill's model to estimate the lattice thermal conductivities at the room temperature. The large Seebeck coefficients, high power factors, and low thermal conductivities make these four orthorhombic IV-VI compounds promising candidates for high-efficient thermoelectric materials.

  6. High-efficient thermoelectric materials: The case of orthorhombic IV-VI compounds

    PubMed Central

    Ding, Guangqian; Gao, Guoying; Yao, Kailun

    2015-01-01

    Improving the thermoelectric efficiency is one of the greatest challenges in materials science. The recent discovery of excellent thermoelectric performance in simple orthorhombic SnSe crystal offers new promise in this prospect [Zhao et al. Nature 508, 373 (2014)]. By calculating the thermoelectric properties of orthorhombic IV-VI compounds GeS,GeSe,SnS, and SnSe based on the first-principles combined with the Boltzmann transport theory, we show that the Seebeck coefficient, electrical conductivity, and thermal conductivity of orthorhombic SnSe are in agreement with the recent experiment. Importantly, GeS, GeSe, and SnS exhibit comparative thermoelectric performance compared to SnSe. Especially, the Seebeck coefficients of GeS, GeSe, and SnS are even larger than that of SnSe under the studied carrier concentration and temperature region. We also use the Cahill's model to estimate the lattice thermal conductivities at the room temperature. The large Seebeck coefficients, high power factors, and low thermal conductivities make these four orthorhombic IV-VI compounds promising candidates for high-efficient thermoelectric materials. PMID:26045338

  7. PREFACE: Workshop on `The Physics of Group IV Materials', 7 10 April 2003, Exeter

    NASA Astrophysics Data System (ADS)

    Evans-Freeman, Jan, Dr; Mainwood, Alison, Dr

    2003-10-01

    This special issue contains a collection of papers presented at the workshop entitled `The Physics of Group IV Materials' held in Exeter on 7-10 April 2003. The workshop was sponsored by the two EPSRC-funded Research Networks on `Defects in Silicon and Si/Ge' and `Diamond and Diamond-Like Carbon'. It was attended by about 100 delegates, most of them students and postdoctoral researchers from the UK, who heard 17 invited talks from speakers prominent in their fields from all over the world. Eight additional oral presentations selected from the contributed papers and 36 posters were presented at the workshop. The discussions were very illuminating, and we hope that the workshop fulfilled its objective in informing quite a wide, and generally young, audience about the very diverse and excellent current research work on Group IV materials. We would like to thank the local organizers, Professor Bob Jones and his students James Adey and Stephen Sque, for the smooth running of the workshop. We would like to thank the editorial committee: Dr David Carey, Professor Paul Coleman, Professor Phillip John, Dr Mark Newton and Professor Arthur Willoughby for their help with the selection of papers for the workshop and with the proceedings.

  8. Structure and properties of phosphorene-like IV-VI 2D materials

    NASA Astrophysics Data System (ADS)

    Ma, Zhinan; Wang, Bo; Ou, Liangkai; Zhang, Yan; Zhang, Xu; Zhou, Zhen

    2016-10-01

    Because of the excellent physical and chemical properties of phosphorene, phosphorene and phosphorene-like materials have attracted extensive attention. Since phosphorus belongs to group V, some group IV-VI compounds could also form phosphorene-like configurations. In this work, GeO, SnO, GeS, and SnS monolayers were constructed to investigate the structural and electronic properties by employing first-principles computations. Phonon spectra suggest that these monolayers are dynamically stable and could be realized in experiments. These monolayers are all semiconductors with the band gaps of 2.26 ∼ 4.13 eV. Based on the monolayers, GeO, SnO, GeS, and SnS bilayers were also constructed. The band gaps of these bilayers are smaller than those of the corresponding monolayers. Moreover, the optical properties of these monolayers and bilayers were calculated, and the results indicate that the SnO, GeS and SnS bilayers exhibit obvious optical absorption in the visible spectrum. All the results suggest that phosphorene-like IV-VI materials are promising candidates for electronic and optical devices.

  9. Structure and properties of phosphorene-like IV-VI 2D materials.

    PubMed

    Ma, Zhinan; Wang, Bo; Ou, Liangkai; Zhang, Yan; Zhang, Xu; Zhou, Zhen

    2016-10-14

    Because of the excellent physical and chemical properties of phosphorene, phosphorene and phosphorene-like materials have attracted extensive attention. Since phosphorus belongs to group V, some group IV-VI compounds could also form phosphorene-like configurations. In this work, GeO, SnO, GeS, and SnS monolayers were constructed to investigate the structural and electronic properties by employing first-principles computations. Phonon spectra suggest that these monolayers are dynamically stable and could be realized in experiments. These monolayers are all semiconductors with the band gaps of 2.26 ∼ 4.13 eV. Based on the monolayers, GeO, SnO, GeS, and SnS bilayers were also constructed. The band gaps of these bilayers are smaller than those of the corresponding monolayers. Moreover, the optical properties of these monolayers and bilayers were calculated, and the results indicate that the SnO, GeS and SnS bilayers exhibit obvious optical absorption in the visible spectrum. All the results suggest that phosphorene-like IV-VI materials are promising candidates for electronic and optical devices.

  10. Structure and properties of phosphorene-like IV-VI 2D materials.

    PubMed

    Ma, Zhinan; Wang, Bo; Ou, Liangkai; Zhang, Yan; Zhang, Xu; Zhou, Zhen

    2016-10-14

    Because of the excellent physical and chemical properties of phosphorene, phosphorene and phosphorene-like materials have attracted extensive attention. Since phosphorus belongs to group V, some group IV-VI compounds could also form phosphorene-like configurations. In this work, GeO, SnO, GeS, and SnS monolayers were constructed to investigate the structural and electronic properties by employing first-principles computations. Phonon spectra suggest that these monolayers are dynamically stable and could be realized in experiments. These monolayers are all semiconductors with the band gaps of 2.26 ∼ 4.13 eV. Based on the monolayers, GeO, SnO, GeS, and SnS bilayers were also constructed. The band gaps of these bilayers are smaller than those of the corresponding monolayers. Moreover, the optical properties of these monolayers and bilayers were calculated, and the results indicate that the SnO, GeS and SnS bilayers exhibit obvious optical absorption in the visible spectrum. All the results suggest that phosphorene-like IV-VI materials are promising candidates for electronic and optical devices. PMID:27608201

  11. Preparation of Zeolite-like Pillared Metal(IV) Phosphate Materials

    NASA Astrophysics Data System (ADS)

    González, J. Santamaría.; Jiménez-López, A.; Lara, María. Martínez

    1995-12-01

    It is possible to obtain mixed aminopropyl sil-aluminum sesquioxanes by simultaneous hydrolysis of (3-aminopropyl)triethoxysilane and aluminum (III) diisopropoxide-2,4-pentanedionate with the stoichiometric amount of water in methanol. These oligomers are intercalated in a M(IV)-phosphate in which the number of POH groups are controlled substituting POH groups by phenyl phosphonates. The zeolite-like pillared materials obtained after thermal treatment at 600°C have high surface areas (up to 126 m 2 g -1) and high total acidity (up to 2.11 mmol of NH 3 desorbed between 100-500°C). XPS reveals that Al has tetrahedral coordination in these materials.

  12. Ground-Based Tests of Spacecraft Polymeric Materials under OXY-GEN Plasma-Beam

    NASA Astrophysics Data System (ADS)

    Chernik, Vladimir; Novikov, Lev; Gaidar, Anna

    2016-07-01

    Spacecraft LEO mission is accompanied by destruction of polymeric material surface under influence of atomic oxygen flow. Sources of molecular, plasma and ion beams are used for the accelerated ground-based tests of spacecraft materials. In the work application of oxygen plasma accelerator of a duoplasmatron type is described. Plasma particles have been accelerated up to average speed of 13-16 km/s. Influence of such beam on materials leads to more intensive destruction of polymers than in LEO. This fact allows to execute tests in the accelerated time scale by a method of an effective fluence. Special measures were given to decrease a concentration of both gaseous and electrode material impurities in the oxygen beam. In the work the results of simulative tests of spacecraft materials and experiments on LEO are considered. Comparison of plasma beam simulation with LEO data has shown conformity for structures of a number of polymeric materials. The relative erosion yields (normalized with respect to polyimide) of the tested materials are shown practically equal to those in LEO. The obtained results give grounds for using the plasma-generation mode with ion energies of 20-30 eV to accelerated testing of spacecraft materials for long -term LEO missions.

  13. Structure and magnetism in novel group IV element-based magnetic materials

    SciTech Connect

    Tsui, Frank

    2013-08-14

    The project is to investigate structure, magnetism and spin dependent states of novel group IV element-based magnetic thin films and heterostructures as a function of composition and epitaxial constraints. The materials systems of interest are Si-compatible epitaxial films and heterostructures of Si/Ge-based magnetic ternary alloys grown by non-equilibrium molecular beam epitaxy (MBE) techniques, specifically doped magnetic semiconductors (DMS) and half-metallic Heusler alloys. Systematic structural, chemical, magnetic, and electrical measurements are carried out, using x-ray microbeam techniques, magnetotunneling spectroscopy and microscopy, and magnetotransport. The work is aimed at elucidating the nature and interplay between structure, chemical order, magnetism, and spin-dependent states in these novel materials, at developing materials and techniques to realize and control fully spin polarized states, and at exploring fundamental processes that stabilize the epitaxial magnetic nanostructures and control the electronic and magnetic states in these complex materials. Combinatorial approach provides the means for the systematic studies, and the complex nature of the work necessitates this approach.

  14. Modeling of thorium (IV) ions adsorption onto a novel adsorbent material silicon dioxide nano-balls using response surface methodology.

    PubMed

    Kaynar, Ümit H; Şabikoğlu, Israfil; Kaynar, Sermin Çam; Eral, Meral

    2016-09-01

    The silicon dioxide nano-balls (nano-SiO2) were prepared for the adsorption of thorium (IV) ions from aqueous solution. The synthesized silicon dioxide nano-balls were characterized by Scanning Electron Microscopy/Energy Dispersive X-ray, X-ray Diffraction, Fourier Transform Infrared and BET surface area measurement spectroscopy. The effects of pH, concentration, temperature and the solid-liquid ratio on the adsorption of thorium by nano-balls were optimized using central composite design of response surface methodology. The interaction between four variables was studied and modelled. Furthermore, the statistical analysis of the results was done. Analysis of variance revealed that all of the single effects found statistically significant on the sorption of Th(IV). Probability F-values (F=4.64-14) and correlation coefficients (R(2)=0.99 for Th(IV)) indicate that model fit the experimental data well. The ability of this material to remove Th(IV) from aqueous solution was characterized by Langmuir, Freunlinch and Temkin adsorption isotherms. The adsorption capacity of thorium (IV) achieved 188.2mgg(-1). Thermodynamic parameters were determined and discussed. The batch adsorption condition with respect to interfering ions was tested. The results indicated that silicon dioxide nano-balls were suitable as sorbent material for adsorption and recovery of Th(IV) ions from aqueous solutions. PMID:27451112

  15. Modeling of thorium (IV) ions adsorption onto a novel adsorbent material silicon dioxide nano-balls using response surface methodology.

    PubMed

    Kaynar, Ümit H; Şabikoğlu, Israfil; Kaynar, Sermin Çam; Eral, Meral

    2016-09-01

    The silicon dioxide nano-balls (nano-SiO2) were prepared for the adsorption of thorium (IV) ions from aqueous solution. The synthesized silicon dioxide nano-balls were characterized by Scanning Electron Microscopy/Energy Dispersive X-ray, X-ray Diffraction, Fourier Transform Infrared and BET surface area measurement spectroscopy. The effects of pH, concentration, temperature and the solid-liquid ratio on the adsorption of thorium by nano-balls were optimized using central composite design of response surface methodology. The interaction between four variables was studied and modelled. Furthermore, the statistical analysis of the results was done. Analysis of variance revealed that all of the single effects found statistically significant on the sorption of Th(IV). Probability F-values (F=4.64-14) and correlation coefficients (R(2)=0.99 for Th(IV)) indicate that model fit the experimental data well. The ability of this material to remove Th(IV) from aqueous solution was characterized by Langmuir, Freunlinch and Temkin adsorption isotherms. The adsorption capacity of thorium (IV) achieved 188.2mgg(-1). Thermodynamic parameters were determined and discussed. The batch adsorption condition with respect to interfering ions was tested. The results indicated that silicon dioxide nano-balls were suitable as sorbent material for adsorption and recovery of Th(IV) ions from aqueous solutions.

  16. Graphene challengers: silicene, germanene and stanene, group IV elemental synthetic electronic materials

    NASA Astrophysics Data System (ADS)

    Le Lay, Guy

    Silicene, germanene and stanene, graphene's group IV elemental cousins, have attracted considerable interest since the birth of silicene in 2012. These novel synthetic two-dimensional (2D) Si, Ge and Sn allotropes are artificially created in situ under ultra high vacuum, since, at variance with graphene, which descents from graphite, they have no parent crystal in nature. They are considered as promising candidates for ultimate scaling of nanoelectronic devices. Indeed, the recent fabrication of the first silicene field effect transistors with ambipolar characteristics operating at room temperature demonstrates their potential as emerging 2D electronic materials. In this invited talk, I will present the archetype 3x3 silicene phase formed on a silver (111) substrate, its sister phases and the growth of multilayer silicene, which hosts Dirac fermions and which is stable in ambient air, protected by its ultra-thin native oxide. The recent synthesis of single layer germanene and stanene, near room temperature 2D topological insulators will be also presented, while multilayer germanene will be further addressed. Challenging graphene, silicene, germanene and stanene, which are directly compatible with the current semiconductor industry, could lead to the development of a new class of low energy consumption nanoelectronic devices.

  17. Materials testing at the Hanna IV in situ coal gasification site

    SciTech Connect

    Keefer, D W; Scoonover, T M

    1980-01-01

    Candidate structural alloy specimens were exposed for about 800 hours to the direct product gas stream from the Hanna IV underground coal gasification experiment. When the specimens were removed from the line, they were coated with a high-sulfur deposit from the product gas. A chemical analysis and the physical appearance of the coatings suggest that they are mixtures of condensed hydrocarbons, coal char, coal ash, and mineral particles from the overburden. Attack on the specimens was primarily corrosion rather than erosion. Mean penetration rates expressed in millimetres per year (mm/y) were calculated from weight loss data. Microscopic examination revealed areas of rather severe local attack on all alloys tested. There was no consistent difference in the amount of material removed from specimens with welds and those without welds. All specimens exposed at 45/sup 0/ to the product gas flow had surface dents from impacting particles, while parallel specimens had none. Energy-dispersive X-ray and Auger electron spectra indicate that the few particles of deposits and/or corrosion products still clinging to the specimen surfaces after cleaning were oxides, rather than sulfides, with significant contents of aluminum and silicon in addition to iron.

  18. Evaluation of Different Disinfactants on Dimensional Accuracy and Surface Quality of Type IV Gypsum Casts Retrieved from Elastomeric Impression Materials

    PubMed Central

    Pal, P K; Kamble, Suresh S; Chaurasia, Ranjitkumar Rampratap; Chaurasia, Vishwajit Rampratap; Tiwari, Samarth; Bansal, Deepak

    2014-01-01

    Background: The present study was done to evaluate the dimensional stability and surface quality of Type IV gypsum casts retrieved from disinfected elastomeric impression materials. Materials and Methods: In an in vitro study contaminated impression material with known bacterial species was disinfected with disinfectants followed by culturing the swab sample to assess reduction in level of bacterial colony. Changes in surface detail reproduction of impression were assessed fallowing disinfection. Results: All the three disinfectants used in the study produced a 100% reduction in colony forming units of the test organisms. Conclusion: All the three disinfectants produced complete disinfection, and didn’t cause any deterioration in surface detail reproduction. How to cite the article: Pal PK, Kamble SS, Chaurasia RR, Chaurasia VR, Tiwari S, Bansal D. Evaluation of dimensional stability and surface quality of type IV gypsum casts retrieved from disinfected elastomeric impression materials. J Int Oral Health 2014;6(3):77-81. PMID:25083038

  19. First principles calculation of material properties of group IV elements and III-V compounds

    NASA Astrophysics Data System (ADS)

    Malone, Brad Dean

    This thesis presents first principles calculations on the properties of group IV elements and group III-V compounds. It includes investigations into what structure a material is likely to form in, and given that structure, what are its electronic, optical, and lattice dynamical properties as well as what are the properties of defects that might be introduced into the sample. The thesis is divided as follows: • Chapter 1 contains some of the conceptual foundations used in the present work. These involve the major approximations which allow us to approach the problem of systems with huge numbers of interacting electrons and atomic cores. • Then, in Chapter 2, we discuss one of the major limitations to the DFT formalism introduced in Chapter 1, namely its inability to predict the quasiparticle spectra of materials and in particular the band gap of a semiconductor. We introduce a Green's function approach to the electron self-energy Sigma known as the GW approximation and use it to compute the quasiparticle band structures of a number of group IV and III-V semiconductors. • In Chapter 3 we present a first-principles study of a number of high-pressure metastable phases of Si with tetrahedral bonding. The phases studied include all experimentally determined phases that result from decompression from the metallic beta-Sn phase, specifically the BC8 (Si-III), hexagonal diamond (Si-IV), and R8 (Si-XII). In addition to these, we also study the hypothetical ST12 structure found upon decompression from beta-Sn in germanium. • Our attention is then turned to the first principles calculations of optical properties in Chapter 4. The Bethe-Salpeter equation is then solved to obtain the optical spectrum of this material including electron-hole interactions. The calculated optical spectrum is compared with experimental data for other forms of silicon commonly used in photovoltaic devices, namely the cubic, polycrystalline, and amorphous forms. • In Chapter 5 we present

  20. Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR & GEN IV

    SciTech Connect

    William J. O’Donnell; Donald S. Griffin

    2007-05-07

    The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

  1. Direct band gaps in group IV-VI monolayer materials: Binary counterparts of phosphorene

    NASA Astrophysics Data System (ADS)

    Kamal, C.; Chakrabarti, Aparna; Ezawa, Motohiko

    2016-03-01

    We perform systematic investigation on the geometric, energetic, and electronic properties of group IV-VI binary monolayers (XY ), which are the counterparts of phosphorene, by employing density functional theory based electronic structure calculations. For this purpose, we choose the binary systems X Y consisting of equal numbers of group IV (X = C, Si, Ge, Sn) and group VI elements (Y = O, S, Se, Te) in three geometrical configurations, the puckered, buckled and planar structures. The results of binding energy calculations show that all the binary systems studied are energetically stable. It is observed that, the puckered structure, similar to that of phosphorene, is the energetically most stable geometric configuration. Moreover, the binding energies of buckled configuration are very close to those of the puckered configuration. Our results of electronic band structure predict that puckered SiO and CSe are direct band semiconductors with gaps of 1.449 and 0.905 eV, respectively. Band structure of CSe closely resembles that of phosphorene. Remaining group IV-VI binary monolayers in the puckered configuration and all the buckled monolayers are also semiconductors, but with indirect band gaps. Importantly, we find that the difference between indirect and direct band gaps is very small for many puckered monolayers. Thus there is a possibility of making these systems undergo transition from indirect to direct band gap semiconducting state by a suitable external influence. Indeed, we show in the present work that seven binary monolayers, namely, SnS, SiSe, GeSe, SnSe, SiTe, GeTe, and SnTe become direct band gap semiconductors when they are subjected to a small mechanical strain (≤3 % ). This makes nine out of sixteen binary monolayers studied in the present work direct band gap semiconductors. Thus there is a possibility of utilizing these binary counterparts of phosphorene in future light-emitting diodes and solar cells.

  2. Stability and electronic structure of two-dimensional allotropes of group-IV materials

    NASA Astrophysics Data System (ADS)

    Matusalem, Filipe; Marques, Marcelo; Teles, Lara K.; Bechstedt, Friedhelm

    2015-07-01

    We study six different two-dimensional (2D) allotropes of carbon, silicon, germanium, and tin by means of the ab initio density functional theory for the ground state and approximate methods to calculate their electronic structures, including quasiparticle effects. Four of the investigated allotropes are based on dumbbell geometries, one on a kagome lattice, and one on the graphenelike hexagonal structure for comparison. Concerning carbon, our calculations of the cohesive energies clearly show that the hexagonal structure (graphene) is most stable. However, in the case of Si and Ge, the dumbbell structures, particularly the large honeycomb dumbbell (LHD) geometries, are energetically favored compared to the s p2/s p3 -bonded hexagonal lattice (i.e., silicene and germanene). The main reason for this is the opening of a band gap in the honeycomb dumbbell arrangements. The LHD sheet crystals represent indirect semiconductors with a K →Γ gap of about 0.5 eV. In the Sn case we predict the MoS2-like symmetry to be more stable, in contrast to the stanene and LHD geometries predicted in literature. Our results for freestanding group-IV layers shine new light on recent experimental studies of group-IV overlayers on various substrates.

  3. Air-Cooled Stack Freeze Tolerance Freeze Failure Modes and Freeze Tolerance Strategies for GenDriveTM Material Handling Application Systems and Stacks Final Scientific Report

    SciTech Connect

    Hancock, David, W.

    2012-02-14

    Air-cooled stack technology offers the potential for a simpler system architecture (versus liquid-cooled) for applications below 4 kilowatts. The combined cooling and cathode air allows for a reduction in part count and hence a lower cost solution. However, efficient heat rejection challenges escalate as power and ambient temperature increase. For applications in ambient temperatures below freezing, the air-cooled approach has additional challenges associated with not overcooling the fuel cell stack. The focus of this project was freeze tolerance while maintaining all other stack and system requirements. Through this project, Plug Power advanced the state of the art in technology for air-cooled PEM fuel cell stacks and related GenDrive material handling application fuel cell systems. This was accomplished through a collaborative work plan to improve freeze tolerance and mitigate freeze-thaw effect failure modes within innovative material handling equipment fuel cell systems designed for use in freezer forklift applications. Freeze tolerance remains an area where additional research and understanding can help fuel cells to become commercially viable. This project evaluated both stack level and system level solutions to improve fuel cell stack freeze tolerance. At this time, the most cost effective solutions are at the system level. The freeze mitigation strategies developed over the course of this project could be used to drive fuel cell commercialization. The fuel cell system studied in this project was Plug Power's commercially available GenDrive platform providing battery replacement for equipment in the material handling industry. The fuel cell stacks were Ballard's commercially available FCvelocity 9SSL (9SSL) liquid-cooled PEM fuel cell stack and FCvelocity 1020ACS (Mk1020) air-cooled PEM fuel cell stack.

  4. Multiscale Modeling of the Deformation of Advanced Ferritic Steels for Generation IV Nuclear Energy

    SciTech Connect

    Nasr M. Ghoniem; Nick Kioussis

    2009-04-18

    The objective of this project is to use the multi-scale modeling of materials (MMM) approach to develop an improved understanding of the effects of neutron irradiation on the mechanical properties of high-temperature structural materials that are being developed or proposed for Gen IV applications. In particular, the research focuses on advanced ferritic/ martensitic steels to enable operation up to 650-700°C, compared to the current 550°C limit on high-temperature steels.

  5. Zirconium(IV) Phosphonate-Phosphates as Efficient Ion-Exchange Materials.

    PubMed

    Silbernagel, Rita; Martin, Caroline H; Clearfield, Abraham

    2016-02-15

    Layered metal phosphonate-phosphate hybrid materials are known to be ion-exchange materials. Hybrids with zirconium metal centers were synthesized at varying phosphonate-phosphate ratios in order to explore the function and charge preference. The zirconium hybrid materials were found to have a range of applicable uses with preference for highly charged ions (3+) over lower charged ions (1+ and 2+). The addition of a large excess of phosphate altered the selectivity, and these materials were able to remove all ions from solution regardless of charge. In this paper, we describe newly synthesized compounds that are simple to prepare, reproducible, stable, and offer a variety of separation schemes.

  6. Compatibility of refrigerants and lubricants with motor materials under retrofit conditions. Final report, Volume IV - pictures

    SciTech Connect

    Doerr, R.G.; Waite, T.D.

    1996-10-01

    Compatibility tests were conducted on motor materials to determine if exposure to the original refrigerant/mineral oil would affect compatibility of the motor materials after retrofit to the alternative refrigerant/lubricant. The motor materials were exposed at elevated temperature to the original refrigerant and mineral oil for 500 hours, followed by exposure to the alternative refrigerant and lubricant for 500 hours. Measurements were also taken after 168 and 336 hours. As a control, some samples were exposed to the original refrigerant/mineral oil for a total of 1000 hours.

  7. Effect of immobilized collagen type IV on biological properties of endothelial cells for the enhanced endothelialization of synthetic vascular graft materials.

    PubMed

    Heo, Yunhoe; Shin, Young Min; Lee, Yu Bin; Lim, Youn Mook; Shin, Heungsoo

    2015-10-01

    Regeneration of healthy endothelium onto vascular graft materials is imperative for prevention of intimal hyperplasia and thrombogenesis. In this study, we investigated the effect of collagen type IV (COL-IV) immobilized onto electrospun nanofibers on modulation of endothelial cell (EC) function, as a potential signal to rapid endothelialization of vascular grafts. COL-IV is assembled in basement membrane underneath intimal layer and regulates morphogenesis of blood vessels. For immobilization of COL-IV, poly(l-lactic acid) (PLLA) nanofibers (PL) were prepared as a model vascular graft substrate, onto which acrylic acid (AAc) was then grafted by using gamma-ray irradiation. AAc graft was dependent on irradiation doses and AAc concentrations, which allowed us to select the condition of 5% (v/v) AAc and 10 kGy for further conjugation of COL-IV. COL-IV immobilization was proportionally controlled as a function of its concentration. Atomic force microscope (AFM) analysis qualitatively supported immobilization of COL-IV, demonstrating increase in root mean square roughness of the PL from 665.37 ± 13.20 nm to 1440.74 ± 33.24. However, the Young's modulus of nanofibers was retained as approximately 1 MPa, regardless of surface modification. The number of ECs attached on the nanofibers with immobilized COL-IV was significantly increased by 5 times (1052 ± 138 cells/mm(2)) from pristine PL (234 ± 41 cells/mm(2)). In addition, the effect of immobilized COL-IV was profound for enhancing proliferation and up-regulation of markers implicated in rapid endothelialization. Collectively, our results suggest that COL-IV immobilized onto electrospun PLLA nanofibers may serve as a promising instructive cue used in vascular graft materials.

  8. Effect of immobilized collagen type IV on biological properties of endothelial cells for the enhanced endothelialization of synthetic vascular graft materials.

    PubMed

    Heo, Yunhoe; Shin, Young Min; Lee, Yu Bin; Lim, Youn Mook; Shin, Heungsoo

    2015-10-01

    Regeneration of healthy endothelium onto vascular graft materials is imperative for prevention of intimal hyperplasia and thrombogenesis. In this study, we investigated the effect of collagen type IV (COL-IV) immobilized onto electrospun nanofibers on modulation of endothelial cell (EC) function, as a potential signal to rapid endothelialization of vascular grafts. COL-IV is assembled in basement membrane underneath intimal layer and regulates morphogenesis of blood vessels. For immobilization of COL-IV, poly(l-lactic acid) (PLLA) nanofibers (PL) were prepared as a model vascular graft substrate, onto which acrylic acid (AAc) was then grafted by using gamma-ray irradiation. AAc graft was dependent on irradiation doses and AAc concentrations, which allowed us to select the condition of 5% (v/v) AAc and 10 kGy for further conjugation of COL-IV. COL-IV immobilization was proportionally controlled as a function of its concentration. Atomic force microscope (AFM) analysis qualitatively supported immobilization of COL-IV, demonstrating increase in root mean square roughness of the PL from 665.37 ± 13.20 nm to 1440.74 ± 33.24. However, the Young's modulus of nanofibers was retained as approximately 1 MPa, regardless of surface modification. The number of ECs attached on the nanofibers with immobilized COL-IV was significantly increased by 5 times (1052 ± 138 cells/mm(2)) from pristine PL (234 ± 41 cells/mm(2)). In addition, the effect of immobilized COL-IV was profound for enhancing proliferation and up-regulation of markers implicated in rapid endothelialization. Collectively, our results suggest that COL-IV immobilized onto electrospun PLLA nanofibers may serve as a promising instructive cue used in vascular graft materials. PMID:26196092

  9. L-Lactide Ring-Opening Polymerization with Tris(acetylacetonate)Titanium(IV) for Renewable Material.

    PubMed

    Kim, Da Hee; Yoo, Ji Yun; Ko, Young Soo

    2016-05-01

    A new Ti-type of catalyst for L-lactide polymerization was synthesized by reaction of titanium(IV) isopropoxide (TTIP) with acetylacetone (AA). Moreover, PLA was prepared by the bulk ring-opening polymerization using synthesized Ti catalyst. Polymerization behaviors were examined depending on monomer/catalyst molar ratio, polymerization temperature and time. The structure of synthesized catalysts was verified with FT-IR and 1H NMR and the properties of poly(L-lactide) (PLLA) were examined by GPC, DSC and FT-IR. There existed about 30 minutes of induction time at the monomer/catalyst molar ratio of 300. The molecular weight (MW) increased as monomer/catalyst molar ratio increased. The MW increased almost linearly as polymerization progressed. Increasing polymerization temperature increased the molecular weight of PLLA as well as monomer/catalyst molar ratio. The melting point (T(m)) of polymers was in the range of 142 to 167 degrees C. Lower T(m) was expected to be resulted from relatively lower molecular weight. PMID:27483787

  10. DOE/NNSA perspective safeguard by design: GEN III/III+ light water reactors and beyond

    SciTech Connect

    Pan, Paul Y

    2010-12-10

    An overview of key issues relevant to safeguards by design (SBD) for GEN III/IV nuclear reactors is provided. Lessons learned from construction of typical GEN III+ water reactors with respect to SBD are highlighted. Details of SBD for safeguards guidance development for GEN III/III+ light water reactors are developed and reported. This paper also identifies technical challenges to extend SBD including proliferation resistance methodologies to other GEN III/III+ reactors (except HWRs) and GEN IV reactors because of their immaturity in designs.

  11. Electronic Principles IV, 7-8. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This fourth of 10 blocks of student and teacher materials for a secondary/postsecondary level course in electronic principles comprises one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. Prerequisites are the previous blocks. This block on…

  12. Use of electron-trapping materials in optical signal processing. IV - Parallel incoherent image subtraction

    NASA Astrophysics Data System (ADS)

    Jutamulia, Suganda; Storti, George M.; Seiderman, William; Lindmayer, Joseph; Gregory, Don A.

    1993-02-01

    The application of electron trapping (ET) materials to parallel incoherent image subtraction over a wide dynamic range is examined in detail. A new incoherent image-subtraction technique based on ET materials is presented which can be applied to automation for microcircuit manufacture and inspection and potentially to data compression for videophones, teleconferencing, and high-definition TV. It is suggested that a high-quality ET thin-film could be coupled directly with a CCD chip to perform real-time image subtraction between two simultaneous scenes or subsequent frames. The advantages of the ET-based technique over the incoherent image-subtraction technique based on two liquid-crystal light valves include absence of coherent noise, high resolution, high space-bandwidth product, high speed, and cost effectiveness.

  13. A novel coating of type IV collagen and hyaluronic acid on stent material-titanium for promoting smooth muscle cell contractile phenotype.

    PubMed

    Li, Jingan; Zhang, Kun; Chen, Huiqing; Liu, Tao; Yang, Ping; Zhao, Yuancong; Huang, Nan

    2014-05-01

    The method of stent implantation is currently considered an effective means of treating atherosclerosis. However, implanting of cardiovascular stent often leads to intimal breakage and hyperplasia. The phenomenon that vascular smooth muscle cells (SMCs) transform from contractile to synthetic phenotype becomes a serious obstacle to intimal recovery. To improve how SMCs transform from a synthetic to contractile phenotype, a technique of coimmobilization was used to form type IV collagen (CoIV) and hyaluronic acid (HA) coating on the widely used stent material, titanium (Ti). In this work, several bio-functional coatings made of CoIV/HA mixtures in different ratios were fabricated on the Ti surface. The quantitative characterization of CoIV showed that introducing HA could enhance the amount of the immobilized CoIV on the alkali activated Ti (TiOH) surface. The immunofluorescence staining results of myosin heavy chain (MHC) and DAPI showed that the coating of CoIV/HA in ratios of 200 μg/ml (M200) and 500 μg/ml (M500) also could promote SMCs expressing more contractile phenotype compared with TiOH/CoIV control samples, while the AO/PI staining results indicated that SMCs on the M200 and M500 samples showed less apoptosis ratio. Thus, we hope that this study can provide more helpful exploration and application for promoting the SMC contractile phenotype on the cardiovascular stents. PMID:24656374

  14. Epitaxial Development of Advanced Group IV Materials and High Performance Optical Devices for Applications in Silicon-photonics and Photovoltaics

    NASA Astrophysics Data System (ADS)

    Beeler, Richard

    Group IV alloy films exhibit the ability to tune both band structure and lattice parameters and have recently attracted attention for their potential applications in Si-photonics and photovoltaics. In this work, several new approaches to produce these alloys directly on Si(100) and Ge(100) wafers are developed. For photovoltaics, use of Ge-buffered Si(100) wafers as a low cost platform for epitaxy of In1-xGaxAs layers was explored. The results indicate that this approach has promise for transitioning from bulk Ge platforms to virtual substrates for a significant cost reduction. The electrical and optical properties of Ge and Ge1-ySn y layers produced using several different techniques were explored via fabrication of high performance heterostructure photodiodes. First, a new CVD approach to Ge-like materials was developed in which germanium is alloyed with very small amounts of tin. These alloys exhibited no significant difference in their structural properties or band gap compared to pure Ge, however superior photo response and reduced dark currents were observed from fabricated devices relative to pure Ge on Si reference diodes. Additionally, pure Ge/Si(100) photodiodes were fabricated using layers grown via reactions of Ge4H 10 on Si(100) and found to exhibit low dark current densities with high collection efficiencies. Ge1-x-ySixSny materials represent the newest member of group IV alloy family. The ability to decouple the lattice constant and the band gap in this system has led to strong interest both for strain/confinement layers in quantum well structures, and as the possible "missing" 1 eV junction in multijunction photovoltaics. Recent progress in this field has allowed for the first time growth, fabrication and measurement of novel photodiodes based on Ge1-x-ySixSn y. This work presents the material, electrical and optical properties of Ge1-x-ySixSny layers and photodiodes grown directly on Ge and Si wafers using two different synthetic approaches. A

  15. X-ray Analysis of Erbium Doping in Group IV Nanocrystalline Materials

    NASA Astrophysics Data System (ADS)

    Meulenberg, Robert

    2005-03-01

    We have produced erbium-doped germanium nanoparticles using a new two cell physical vapor deposition system. Doped nanoparticles are fabricated using two methods: 1) by co-evaporation of Er and Ge and 2) by Er deposition on the surface of undoped Ge nanoparticles. Using elemental specific x-ray techniques [x-ray absorption (XAS) and photoemission (PES) spectroscopy], we are able to monitor band edge shifts as a function of both particle size and Er concentration. In addition, we have used XAS and PES to probe the chemical environment of Er in Ge nanoparticles. We find that large Er/Ge ratios lead to strong spectroscopic signatures in the core level PES spectra. Lower Er/Ge ratios show very little effects in the core level spectra; however, the valence band density of states is altered which allows PES to probe dilute concentrations of Er in Ge nanoparticles. Impact of Er doping on the Ge nanoparticle electronic structure will be discussed. This work was supported by the Division of Materials Sciences, Office of Basic Energy Science, and performed under the auspices of the U. S. DOE by LLNL under contract No. W-7405-ENG-48.

  16. FutureGen Project Report

    SciTech Connect

    Cabe, Jim; Elliott, Mike

    2010-09-30

    This report summarizes the comprehensive siting, permitting, engineering, design, and costing activities completed by the FutureGen Industrial Alliance, the Department of Energy, and associated supporting subcontractors to develop a first of a kind near zero emissions integrated gasification combined cycle power plant and carbon capture and storage project (IGCC-CCS). With the goal to design, build, and reliably operate the first IGCC-CCS facility, FutureGen would have been the lowest emitting pulverized coal power plant in the world, while providing a timely and relevant basis for coal combustion power plants deploying carbon capture in the future. The content of this report summarizes key findings and results of applicable project evaluations; modeling, design, and engineering assessments; cost estimate reports; and schedule and risk mitigation from initiation of the FutureGen project through final flow sheet analyses including capital and operating reports completed under DOE award DE-FE0000587. This project report necessarily builds upon previously completed siting, design, and development work executed under DOE award DE-FC26- 06NT4207 which included the siting process; environmental permitting, compliance, and mitigation under the National Environmental Policy Act; and development of conceptual and design basis documentation for the FutureGen plant. For completeness, the report includes as attachments the siting and design basis documents, as well as the source documentation for the following: • Site evaluation and selection process and environmental characterization • Underground Injection Control (UIC) Permit Application including well design and subsurface modeling • FutureGen IGCC-CCS Design Basis Document • Process evaluations and technology selection via Illinois Clean Coal Review Board Technical Report • Process flow diagrams and heat/material balance for slurry-fed gasifier configuration • Process flow diagrams and heat/material balance

  17. Me and My Environment, Unit IV: Transfer and Cycling of Materials in My Environment, Experimental Edition 1973-74.

    ERIC Educational Resources Information Center

    Biological Sciences Curriculum Study, Boulder, CO.

    The experimental 1973-74 edition of Unit IV consists of 28 life science curriculum activities for 13- to 16-year-old educable mentally handicapped children. The role of the teacher in continuing field trials is noted and environmental themes and elements, inquiry skills, problem solving skills, and applicational behaviors and attitudes are…

  18. Using GenBank.

    PubMed

    Sayers, Eric W; Karsch-Mizrachi, Ilene

    2016-01-01

    GenBank(®) is a comprehensive database of publicly available DNA sequences for 300,000 named organisms, more than 110,000 within the embryophyta, obtained through submissions from individual laboratories and batch submissions from large-scale sequencing projects. Daily data exchange with the European Nucleotide Archive (ENA) in Europe and the DNA Data Bank of Japan ensures worldwide coverage. GenBank is accessible through the NCBI Entrez retrieval system that integrates data from the major DNA and protein sequence databases with taxonomy, genome, mapping, protein structure and domain information, as well as the biomedical journal literature in PubMed. BLAST provides sequence similarity searches of GenBank and other sequence databases. Complete bimonthly releases and daily updates of the GenBank database are available by FTP. GenBank usage scenarios ranging from local analyses of the data available via FTP to online analyses supported by the NCBI web-based tools are discussed. To access GenBank and its related retrieval and analysis services, go to the NCBI home page at www.ncbi.nlm.nih.gov . PMID:26519398

  19. Derivation of residual radioactive material guidelines for 13 radionuclides present in Operable Unit IV at Brookhaven National Laboratory, Upton, New York

    SciTech Connect

    Faillace, E.; Nimmagadda, M.; Yu, C.

    1994-12-01

    Residual radioactive material guidelines for 13 radionuclides (americium-241; cobalt-60; cesium-137; europium-152, -154, and -155; plutonium-238, -239, and -240; strontium-90; and uranium-234, -235, and -238) were derived for Operable Unit (OU) IV at Brookhaven National Laboratory. This site has been identified for remedial action under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980, as amended by the Superfund Amendments and Reauthorization Act of 1986. Single-nuclide guidelines were derived on the basis of the requirement that the 50-year committed effective dose equivalent to a hypothetical individual who lives or works in the immediate vicinity of OU IV should not exceed a dose constraint of 30 mrem/yr following remedial action for the current use and plausible future use scenarios or a dose limit of 100 mrem/yr for plausible but less likely future use scenarios. The US Department of Energy (DOE) residual radioactive material guideline computer code, RESRAD, was used in this evaluation; RESRAD implements the methodology described in the DOE manual for determining residual radioactive material guidelines. Four potential scenarios were considered; each assumed that, for a period of 1,000 years following remedial action, the site would be used without radiological restrictions. The four scenarios varied with regard to the type of site use, time spent at the site, and sources of food consumed.

  20. Asteroids IV

    NASA Astrophysics Data System (ADS)

    Michel, Patrick; DeMeo, Francesca E.; Bottke, William F.

    Asteroids are fascinating worlds. Considered the building blocks of our planets, many of the authors of this book have devoted their scientific careers to exploring them with the tools of our trade: ground- and spacebased observations, in situ space missions, and studies that run the gamut from theoretical modeling efforts to laboratory work. Like fossils for paleontologists, or DNA for geneticists, they allow us to construct a veritable time machine and provide us with tantalizing glimpses of the earliest nature of our solar system. By investigating them, we can probe what our home system was like before life or even the planets existed. The origin and evolution of life on our planet is also intertwined with asteroids in a different way. It is believed that impacts on the primordial Earth may have delivered the basic components for life, with biology favoring attributes that could more easily survive the aftermath of such energetic events. In this fashion, asteroids may have banished many probable avenues for life to relative obscurity. Similarly, they may have also prevented our biosphere from becoming more complex until more recent eras. The full tale of asteroid impacts on the history of our world, and how human life managed to emerge from myriad possibilities, has yet to be fully told. The hazard posed by asteroid impacts to our civilization is low but singular. The design of efficient mitigation strategies strongly relies on asteroid detection by our ground- and spacebased surveys as well as knowledge of their physical properties. A more positive motivation for asteroid discovery is that the proximity of some asteroids to Earth may allow future astronauts to harvest their water and rare mineral resources for use in exploration. A key goal of asteroid science is therefore to learn how humans and robotic probes can interact with asteroids (and extract their materials) in an efficient way. We expect that these adventures may be commonplace in the future

  1. Asteroids IV

    NASA Astrophysics Data System (ADS)

    Michel, Patrick; DeMeo, Francesca E.; Bottke, William F.

    Asteroids are fascinating worlds. Considered the building blocks of our planets, many of the authors of this book have devoted their scientific careers to exploring them with the tools of our trade: ground- and spacebased observations, in situ space missions, and studies that run the gamut from theoretical modeling efforts to laboratory work. Like fossils for paleontologists, or DNA for geneticists, they allow us to construct a veritable time machine and provide us with tantalizing glimpses of the earliest nature of our solar system. By investigating them, we can probe what our home system was like before life or even the planets existed. The origin and evolution of life on our planet is also intertwined with asteroids in a different way. It is believed that impacts on the primordial Earth may have delivered the basic components for life, with biology favoring attributes that could more easily survive the aftermath of such energetic events. In this fashion, asteroids may have banished many probable avenues for life to relative obscurity. Similarly, they may have also prevented our biosphere from becoming more complex until more recent eras. The full tale of asteroid impacts on the history of our world, and how human life managed to emerge from myriad possibilities, has yet to be fully told. The hazard posed by asteroid impacts to our civilization is low but singular. The design of efficient mitigation strategies strongly relies on asteroid detection by our ground- and spacebased surveys as well as knowledge of their physical properties. A more positive motivation for asteroid discovery is that the proximity of some asteroids to Earth may allow future astronauts to harvest their water and rare mineral resources for use in exploration. A key goal of asteroid science is therefore to learn how humans and robotic probes can interact with asteroids (and extract their materials) in an efficient way. We expect that these adventures may be commonplace in the future

  2. GenBank.

    PubMed

    Benson, D A; Boguski, M; Lipman, D J; Ostell, J

    1994-09-01

    The GenBank sequence database continues to expand its data coverage, quality control, annotation content and retrieval services for the scientific community. Besides handling direct submissions of sequence data from authors, GenBank also incorporates DNA sequences from all available public sources; an integrated retrieval system, known as Entrez, also makes available data from the major protein sequence and structural databases, and from U.S. and European patents. MIDLINE abstracts from published articles describing the sequences are also included as an additional source of biological annotation for sequence entries. GenBank supports distribution of the data via FTP, CD-ROM, and E-mail servers. Network server-client programs provide access to an integrated database for literature retrieval and sequence similarity searching. PMID:7937042

  3. Mechanisms Governing the Creep Behavior of High Temperature Alloys for Generation IV Nuclear Energy Systems

    SciTech Connect

    Vasudevan, Vijay; Carroll, Laura; Sham, Sam

    2015-04-06

    This research project, which includes collaborators from INL and ORNL, focuses on the study of alloy 617 and alloy 800H that are candidates for applications as intermediate heat exchangers in GEN IV nuclear reactors, with an emphasis on the effects of grain size, grain boundaries and second phases on the creep properties; the mechanisms of dislocation creep, diffusional creep and cavitation; the onset of tertiary creep; and theoretical modeling for long-term predictions of materials behavior and for high temperature alloy design.

  4. Welding IV.

    ERIC Educational Resources Information Center

    Allegheny County Community Coll., Pittsburgh, PA.

    Instructional objectives and performance requirements are outlined in this course guide for Welding IV, a competency-based course in advanced arc welding offered at the Community College of Allegheny County to provide students with proficiency in: (1) single vee groove welding using code specifications established by the American Welding Society…

  5. IVS Organization

    NASA Technical Reports Server (NTRS)

    2004-01-01

    International VLBI Service (IVS) is an international collaboration of organizations which operate or support Very Long Baseline Interferometry (VLBI) components. The goals are: To provide a service to support geodetic, geophysical and astrometric research and operational activities. To promote research and development activities in all aspects of the geodetic and astrometric VLBI technique. To interact with the community of users of VLBI products and to integrate VLBI into a global Earth observing system.

  6. Crystal chemistry of uranium (V) and plutonium (IV) in a titanate ceramic for disposition of surplus fissile material

    NASA Astrophysics Data System (ADS)

    Fortner, J. A.; Kropf, A. J.; Finch, R. J.; Bakel, A. J.; Hash, M. C.; Chamberlain, D. B.

    2002-07-01

    We report X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine-structure (EXAFS) spectra for the plutonium LIII and uranium LIII edges in titanate pyrochlore ceramic. The titanate ceramics studied are of the type proposed to serve as a matrix for the immobilization of surplus fissile materials. The samples studied contain approximately 10 wt% fissile plutonium and 20 wt% natural uranium, and are representative of material within the planned production envelope. Based upon natural analogue models, it had been previously assumed that both uranium and plutonium would occupy the calcium site in the pyrochlore crystal structure. While the XANES and EXAFS signals from the plutonium LIII are consistent with this substitution into the calcium site within pyrochlore, the uranium XANES is characteristic of pentavalent uranium. Furthermore, the EXAFS signal from the uranium has a distinct oxygen coordination shell at 2.07 Å and a total oxygen coordination of about 6, which is inconsistent with the calcium site. These combined EXAFS and XANES results provide the first evidence of substantial pentavalent uranium in an octahedral site in pyrochlore. This may also explain the copious nucleation of rutile (TiO 2) precipitates commonly observed in these materials as uranium displaces titanium from the octahedral sites.

  7. Sodium fast reactor evaluation: Core materials

    NASA Astrophysics Data System (ADS)

    Cheon, Jin Sik; Lee, Chan Bock; Lee, Byoung Oon; Raison, J. P.; Mizuno, T.; Delage, F.; Carmack, J.

    2009-07-01

    In the framework of the Generation IV Sodium Fast Reactor (SFR) Program the Advanced Fuel Project has conducted an evaluation of the available fuel systems supporting future sodium cooled fast reactors. In this paper the status of available and developmental materials for SFR core cladding and duct applications is reviewed. To satisfy the Generation IV SFR fuel requirements, an advanced cladding needs to be developed. The candidate cladding materials are austenitic steels, ferritic/martensitic (F/M) steels, and oxide dispersion strengthened (ODS) steels. A large amount of irradiation testing is required, and the compatibility of cladding with TRU-loaded fuel at high temperatures and high burnup must be investigated. The more promising F/M steels (compared to HT9) might be able to meet the dose requirements of over 200 dpa for ducts in the GEN-IV SFR systems.

  8. Advanced Non-Destructive Assessment Technology to Determine the Aging of Silicon Containing Materials for Generation IV Nuclear Reactors

    NASA Astrophysics Data System (ADS)

    Koenig, T. W.; Olson, D. L.; Mishra, B.; King, J. C.; Fletcher, J.; Gerstenberger, L.; Lawrence, S.; Martin, A.; Mejia, C.; Meyer, M. K.; Kennedy, R.; Hu, L.; Kohse, G.; Terry, J.

    2011-06-01

    To create an in-situ, real-time method of monitoring neutron damage within a nuclear reactor core, irradiated silicon carbide samples are examined to correlate measurable variations in the material properties with neutron fluence levels experienced by the silicon carbide (SiC) during the irradiation process. The reaction by which phosphorus doping via thermal neutrons occurs in the silicon carbide samples is known to increase electron carrier density. A number of techniques are used to probe the properties of the SiC, including ultrasonic and Hall coefficient measurements, as well as high frequency impedance analysis. Gamma spectroscopy is also used to examine residual radioactivity resulting from irradiation activation of elements in the samples. Hall coefficient measurements produce the expected trend of increasing carrier concentration with higher fluence levels, while high frequency impedance analysis shows an increase in sample impedance with increasing fluence.

  9. Status of materials handbooks for particle accelerator and nuclear reactor applications

    NASA Astrophysics Data System (ADS)

    Maloy, Stuart; Rogers, Berylene; Ren, Weiju; Rittenhouse, Philip

    2008-06-01

    In support of research and development for accelerator applications, a materials handbook was developed in August of 1998 funded by the Accelerator Production of Tritium Project. This handbook, presently called Advanced Fuel Cycle Initiative ( AFCI) Materials Handbook, Materials Data for Particle Accelerator Applications, has just issued Revision 5 and contains detailed information showing the effects of irradiation on many properties for a wide variety of materials. Development of a web-accessible materials database for Generation IV Reactor Programs has been ongoing for about three years. This handbook provides a single authoritative source for qualified materials data applicable to all Generation IV reactor concepts. A beta version of this Gen IV Materials Handbook has been completed and is presently under evaluation.

  10. Growth and optical properties of novel doped and undoped group IV materials based on silicon, germanium, and tin

    NASA Astrophysics Data System (ADS)

    Cook, Candi S.

    The development of a new class of semiconductors in the silicon-germanium-tin system, based on novel deuterium-stabilized tin hydrides epitaxially grown on silicon substrates, provides a new low-temperature chemical vapor deposition route to a broad range of highly metastable compositions and structures that cannot be obtained by other methods. This research focuses on the continued synthesis, characterization, and performance evaluation of Ge1-xSn x binary and Ge1-x-ySixSny ternary semiconductors. The Ge1-xSnx alloys are grown as thin films directly on Si(100) via ultrahigh vacuum chemical vapor deposition (UHV-CVD) reactions of gaseous SnD4 and Ge2H6. The alloys display random diamond-cubic monocrystalline structures and unique morphological and optical properties such as atomically flat surfaces and tunable bandgaps. The large lattice mismatch of the layers and the Si substrates is accommodated by Lomer edge dislocations located at the interface. In this study a detailed determination of the Ge1- xSnx alloys optical properties is conducted via spectroscopic ellipsometry. The materials display a Ge like band gap structure with critical point energies (E 1, E1+Delta, E0, E2) that decrease monotonically with increasing Sn content from 1-20 at.%. Another aspect of this research is the use of the Ge1-xSnx alloys as buffer layers to grow Ge1-x-ySixSny ternaries. The ternaries demonstrate good crystallinity with low defect densities. Deep ultraviolet spectroscopic ellipsometry analysis of the materials yields dielectric functions consistent with crystalline alloys of cubic symmetry. The primary focus of this study is the growth of n-type doped Ge 1-xSnx alloys via in situ reactions of SnD4/Ge 2H6 with appropriate concentrations of the newly prepared As(GeH3)3 single source hydride. The thin films demonstrate excellent microstructural quality and high doping concentrations (10 19). The levels of activated As atoms incorporated in the Ge-Sn lattice are determined by

  11. Synthesis of Ge1-xSnx alloys by ion implantation and pulsed laser melting: Towards a group IV direct bandgap material

    NASA Astrophysics Data System (ADS)

    Tran, Tuan T.; Pastor, David; Gandhi, Hemi H.; Smillie, Lachlan A.; Akey, Austin J.; Aziz, Michael J.; Williams, J. S.

    2016-05-01

    The germanium-tin (Ge1-xSnx) material system is expected to be a direct bandgap group IV semiconductor at a Sn content of 6.5 - 11 at . % . Such Sn concentrations can be realized by non-equilibrium deposition techniques such as molecular beam epitaxy or chemical vapour deposition. In this report, the combination of ion implantation and pulsed laser melting is demonstrated to be an alternative promising method to produce a highly Sn concentrated alloy with a good crystal quality. The structural properties of the alloys such as soluble Sn concentration, strain distribution, and crystal quality have been characterized by Rutherford backscattering spectrometry, Raman spectroscopy, x ray diffraction, and transmission electron microscopy. It is shown that it is possible to produce a high quality alloy with up to 6.2 at . % Sn . The optical properties and electronic band structure have been studied by spectroscopic ellipsometry. The introduction of substitutional Sn into Ge is shown to either induce a splitting between light and heavy hole subbands or lower the conduction band at the Γ valley. Limitations and possible solutions to introducing higher Sn content into Ge that is sufficient for a direct bandgap transition are also discussed.

  12. DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS

    SciTech Connect

    William E. Kastenberg; Edward Blandford; Lance Kim

    2009-03-31

    This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public.

  13. Synthesis, characterization and analytical application of nano-composite cation-exchange material, poly-o-toluidine Ce(IV) phosphate: Its application in making Cd(II) ion selective membrane electrode

    NASA Astrophysics Data System (ADS)

    Khan, Asif Ali; Akhtar, Tabassum

    2011-03-01

    An organic-inorganic composite, poly-o-toluidine Ce(IV) phosphate was chemically synthesized by mixing ortho-toluidine into the gel of Ce(IV) phosphate in different mixing volume ratios. Effect of eluant concentration, elution behavior and pH-titration studies were carried out to understand the ion-exchange capabilities. The physico-chemical properties of the material were determined using AAS, CHN elemental analysis, UV-VIS spectrophotometry, FTIR, SEM/EDX, TGA-DTA, TEM (Transmission electron microscopy), XRD and SEM studies. The distribution studies revealed that the cation-exchange material is highly selective for Cd(II). Due to selective nature of the cation-exchanger, ion selective membrane electrode was fabricated for the determination of Cd(ІІ) ions in solutions. The analytical utility of this electrode was established by employing it as an indicator electrode in electrometric titrations.

  14. Nuclear Concrete Materials Database Phase I Development

    SciTech Connect

    Ren, Weiju; Naus, Dan J

    2012-05-01

    The FY 2011 accomplishments in Phase I development of the Nuclear Concrete Materials Database to support the Light Water Reactor Sustainability Program are summarized. The database has been developed using the ORNL materials database infrastructure established for the Gen IV Materials Handbook to achieve cost reduction and development efficiency. In this Phase I development, the database has been successfully designed and constructed to manage documents in the Portable Document Format generated from the Structural Materials Handbook that contains nuclear concrete materials data and related information. The completion of the Phase I database has established a solid foundation for Phase II development, in which a digital database will be designed and constructed to manage nuclear concrete materials data in various digitized formats to facilitate electronic and mathematical processing for analysis, modeling, and design applications.

  15. Interoperability of Materials Database Systems in Support of Nuclear Energy Development and Potential Applications for Fuel Cell Material Selection

    SciTech Connect

    Lin, Lianshan; Austin, Timothy; Ren, Weiju

    2015-01-01

    Materials database interoperability has been of great interest in recent years for information exchange in support of research and development (R&D). In response to data and knowledge sharing needs of the GenIV International Forum (GIF) for global collaboration in nuclear energy R&D, the European Commission JRC Institute for Energy and Transport (JRC-IET) and the Oak Ridge National Laboratory (ORNL) have established a materials database interoperability project that develops techniques for automated materials data exchange between systems hosted at the two institutes MatDB Online at JRC IET and the Gen IV Materials Handbook at ORNL, respectively. The work to enable automated exchange of data between the two systems leverages the XML data import and export functionalities of both systems in combination with recently developed standards for engineering materials data. The preliminary results of data communication between the two systems have demonstrated the feasibility and efficiency of materials database interoperability, which constructs an interoperation framework that can be seamlessly integrated into the high-throughput First Principles material databases and thus advance the discovery of novel materials in fuel cell applications.

  16. Interoperability of Materials Database Systems in Support of Nuclear Energy Development and Potential Applications for Fuel Cell Material Selection

    DOE PAGESBeta

    Lin, Lianshan; Austin, Timothy; Ren, Weiju

    2015-01-01

    Materials database interoperability has been of great interest in recent years for information exchange in support of research and development (R&D). In response to data and knowledge sharing needs of the GenIV International Forum (GIF) for global collaboration in nuclear energy R&D, the European Commission JRC Institute for Energy and Transport (JRC-IET) and the Oak Ridge National Laboratory (ORNL) have established a materials database interoperability project that develops techniques for automated materials data exchange between systems hosted at the two institutes MatDB Online at JRC IET and the Gen IV Materials Handbook at ORNL, respectively. The work to enable automatedmore » exchange of data between the two systems leverages the XML data import and export functionalities of both systems in combination with recently developed standards for engineering materials data. The preliminary results of data communication between the two systems have demonstrated the feasibility and efficiency of materials database interoperability, which constructs an interoperation framework that can be seamlessly integrated into the high-throughput First Principles material databases and thus advance the discovery of novel materials in fuel cell applications.« less

  17. Technical Appendices to the National Day Care Study: Background Materials. Final Report of the National Day Care Study. Volume IV-A.

    ERIC Educational Resources Information Center

    Ruopp, Richard; And Others

    This final report of the National Day Care Study (NDCS), Volume IV-A, contains three papers that help to set a context for interpreting overall study results. "Research Issues in Day Care, A Focused Review of the Literature" focuses on effects of group care and regulatable characteristics of the day care environment. The second paper, "Case…

  18. LFR Demonstrator Materials Viability

    SciTech Connect

    Caro, M

    2006-08-02

    Interest in fast reactor development has increased with the Department of Energy's introduction of the Global Nuclear Energy Partnership (GNEP) [1]. The GNEP program plans development of a sodium cooled Advanced Burner Reactor (ABR) that can be used to reduce the amount spent LWR fuel in storage and the number of high level waste sites needed for expansion of nuclear power throughout the world over the 21st century. In addition, the program proposes to make nuclear power more available while reducing the proliferation concerns by revising policies and technology for control of weapons useable materials. This would be accomplished with establishment of new institutional arrangements based on selective siting of reprocessing, enrichment and waste disposal facilities. The program would also implement development of small reactors suitable for use in developing countries or remote regions with small power grids. Over the past several years, under the Department of Energy (DOE) NERI and GEN IV programs research has been conducted on small lead cooled reactors. The Small Secure Transportable Autonomous Reactor (SSTAR) [2] is the most recent version of this type of reactor and research is continuing on it in the GEN IV program in parallel with GNEP. SSTAR is a small (10MWe-100MWe) reactor that is fueled once for life. It complements the GNEP program very well in that it serves one of the world markets not currently addressed by large reactors and its development requirements are similar to those for the ABRs. In particular, the fuel and structural materials for these fast spectrum reactors share common thermal and neutron environments. The coolants, sodium in ABR and lead or lead-bismuth eutectic (LBE) in SSTAR, are the major developmental difference. This report discusses the status of structural materials for fast reactor core and primary system components and selected aspects of their development.

  19. 25 Years of GenBank

    MedlinePlus

    ... of this page please turn Javascript on. Unique DNA database has helped advance scientific discoveries worldwide Since ... GenBank? Basically, GenBank is the biggest database of DNA in the world. Deoxyribonucleic acid (DNA) is the ...

  20. Mapping from GenBank to MEDLINE.

    PubMed Central

    Bicknell, E J; Rada, R; Davidson, S; Stander, R

    1988-01-01

    GenBank has been based largely on literature that provides nucleic acid sequences. To find additional literature that is relevant to a given sequence, a search of MEDLINE can prove helpful. This paper documents some of the similarities between GenBank and MEDLINE that facilitate retrieval of documents from MEDLINE. In particular, techniques and examples are presented which take GenBank information and lead to MEDLINE information that supplements the GenBank information. PMID:3281141

  1. Intelligent Virtual Station (IVS)

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Intelligent Virtual Station (IVS) is enabling the integration of design, training, and operations capabilities into an intelligent virtual station for the International Space Station (ISS). A viewgraph of the IVS Remote Server is presented.

  2. Ovarian Cancer Stage IV

    MedlinePlus

    ... hyphen, e.g. -historical Searches are case-insensitive Ovarian Cancer Stage IV Add to My Pictures View /Download : ... 1200x1335 View Download Large: 2400x2670 View Download Title: Ovarian Cancer Stage IV Description: Drawing of stage IV shows ...

  3. Summary of CPAS Gen II Parachute Analysis

    NASA Technical Reports Server (NTRS)

    Morris, Aaron L.; Bledsoe, Kristin J.; Fraire, Usbaldo, Jr.; Moore, James W.; Olson, Leah M.; Ray, Eric

    2011-01-01

    The Orion spacecraft is currently under development by NASA and Lockheed Martin. Like Apollo, Orion will use a series of parachutes to slow its descent and splashdown safely. The Orion parachute system, known as the CEV Parachute Assembly System (CPAS), is being designed by NASA, the Engineering and Science Contract Group (ESCG), and Airborne Systems. The first generation (Gen I) of CPAS testing consisted of thirteen tests and was executed in the 2007-2008 timeframe. The Gen I tests provided an initial understanding of the CPAS parachutes. Knowledge gained from Gen I testing was used to plan the second generation of testing (Gen II). Gen II consisted of six tests: three singleparachute tests, designated as Main Development Tests, and three Cluster Development Tests. Gen II required a more thorough investigation into parachute performance than Gen I. Higher fidelity instrumentation, enhanced analysis methods and tools, and advanced test techniques were developed. The results of the Gen II test series are being incorporated into the CPAS design. Further testing and refinement of the design and model of parachute performance will occur during the upcoming third generation of testing (Gen III). This paper will provide an overview of the developments in CPAS analysis following the end of Gen I, including descriptions of new tools and techniques as well as overviews of the Gen II tests.

  4. Tuning of the critical temperature in iron(II) spin-crossover materials based on bridging polycyanidometallates: pentacyanidonitrosylferrate(II) and hexacyanidoplatinate(IV).

    PubMed

    Herchel, Radovan; Trávníček, Zdeněk; Zbořil, Radek

    2011-12-19

    The reactions of iron(II) sulfate, 4-amino-3,5-di-2-pyridyl-4H-1,2,4-triazole (abpt), and pentacyanidonitrosylferrate(II) or hexacyanidoplatinate(IV) resulted in the formation of one-dimensional iron(II) spin-crossover compounds [Fe(abpt)(2)(μ-Fe(CN)(5)(NO))](n) (1) and [Fe(abpt)(2)(μ-Pt(CN)(6))](n) (2) with the spin-transition critical temperature near or above room temperature accompanied by thermochromism. Furthermore, it has been proven that the critical temperature T(c) is influenced by the type of dianionic polycyanidometallate within the series of discussed systems, and it changes in the sequence of [Fe(CN)(5)(NO)](2-) < [Pt(CN)(6))](2-) < [Ni(CN)(4))](2-) ≈ [Pd(CN)(4))](2-) ≈ [Pt(CN)(4))](2-). PMID:22098426

  5. From AWE-GEN to AWE-GEN-2d: a high spatial and temporal resolution weather generator

    NASA Astrophysics Data System (ADS)

    Peleg, Nadav; Fatichi, Simone; Paschalis, Athanasios; Molnar, Peter; Burlando, Paolo

    2016-04-01

    A new weather generator, AWE-GEN-2d (Advanced WEather GENerator for 2-Dimension grid) is developed following the philosophy of combining physical and stochastic approaches to simulate meteorological variables at high spatial and temporal resolution (e.g. 2 km x 2 km and 5 min for precipitation and cloud cover and 100 m x 100 m and 1 h for other variables variable (temperature, solar radiation, vapor pressure, atmospheric pressure and near-surface wind). The model is suitable to investigate the impacts of climate variability, temporal and spatial resolutions of forcing on hydrological, ecological, agricultural and geomorphological impacts studies. Using appropriate parameterization the model can be used in the context of climate change. Here we present the model technical structure of AWE-GEN-2d, which is a substantial evolution of four preceding models (i) the hourly-point scale Advanced WEather GENerator (AWE-GEN) presented by Fatichi et al. (2011, Adv. Water Resour.) (ii) the Space-Time Realizations of Areal Precipitation (STREAP) model introduced by Paschalis et al. (2013, Water Resour. Res.), (iii) the High-Resolution Synoptically conditioned Weather Generator developed by Peleg and Morin (2014, Water Resour. Res.), and (iv) the Wind-field Interpolation by Non Divergent Schemes presented by Burlando et al. (2007, Boundary-Layer Meteorol.). The AWE-GEN-2d is relatively parsimonious in terms of computational demand and allows generating many stochastic realizations of current and projected climates in an efficient way. An example of model application and testing is presented with reference to a case study in the Wallis region, a complex orography terrain in the Swiss Alps.

  6. Aircraft Environmental System Mechanic, 2-9. Block IV--Utility Systems and Flight Line Maintenance. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This publication contains a teaching guide and student instructional materials for conducting a high school or adult vocational education course to train persons to perform duties as an aircraft environmental systems mechanic. The instructional design for this course is self-paced and/or small group-paced. Instructor materials contained in the…

  7. Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement IV (1980).

    ERIC Educational Resources Information Center

    Environmental Protection Agency, Columbus, OH.

    Presented are abstracts and indexes to selected print and non-print materials related to wastewater treatment and water quality education. Also included are procedures to illustrate how instructors and curriculum developers in the water quality control field can locate instructional materials to meet very general or highly specific requirements in…

  8. Energy levels and lifetimes of Nd IV, Pm IV, Sm IV, and Eu IV

    SciTech Connect

    Dzuba, V. A.; Safronova, U. I.; Johnson, W. R.

    2003-09-01

    To address the shortage of experimental data for electron spectra of triply ionized rare-earth elements we have calculated energy levels and lifetimes of 4f{sup n+1} and 4f{sup n}5d configurations of Nd IV (n=2), Pm IV (n=3), Sm IV (n=4), and Eu IV (n=5) using Hartree-Fock and configuration-interaction methods. To control the accuracy of our calculations we also performed similar calculations for Pr III, Nd III, and Sm III, for which experimental data are available. The results are important, in particular, for physics of magnetic garnets.

  9. In situ chemical oxidation of contaminated groundwater by persulfate: decomposition by Fe(III)- and Mn(IV)-containing oxides and aquifer materials.

    PubMed

    Liu, Haizhou; Bruton, Thomas A; Doyle, Fiona M; Sedlak, David L

    2014-09-01

    Persulfate (S2O8(2-)) is being used increasingly for in situ chemical oxidation (ISCO) of organic contaminants in groundwater, despite an incomplete understanding of the mechanism through which it is converted into reactive species. In particular, the decomposition of persulfate by naturally occurring mineral surfaces has not been studied in detail. To gain insight into the reaction rates and mechanism of persulfate decomposition in the subsurface, and to identify possible approaches for improving its efficacy, the decomposition of persulfate was investigated in the presence of pure metal oxides, clays, and representative aquifer solids collected from field sites in the presence and absence of benzene. Under conditions typical of groundwater, Fe(III)- and Mn(IV)-oxides catalytically converted persulfate into sulfate radical (SO4(•-)) and hydroxyl radical (HO(•)) over time scales of several weeks at rates that were 2-20 times faster than those observed in metal-free systems. Amorphous ferrihydrite was the most reactive iron mineral with respect to persulfate decomposition, with reaction rates proportional to solid mass and surface area. As a result of radical chain reactions, the rate of persulfate decomposition increased by as much as 100 times when benzene concentrations exceeded 0.1 mM. Due to its relatively slow rate of decomposition in the subsurface, it can be advantageous to inject persulfate into groundwater, allowing it to migrate to zones of low hydraulic conductivity where clays, metal oxides, and contaminants will accelerate its conversion into reactive oxidants.

  10. Facile Routes to Th(IV), U(IV), and Np(IV) Phosphites and Phosphates

    SciTech Connect

    Villa, Eric M.; Wang, Shuao; Alekseev, Evgeny V.; Depmeier, Wulf; Albrecht-Schmitt, Thomas E.

    2011-08-05

    Three actinide(IV) phosphites and a NpIV phosphate, AnIV(HPO₃)₂(H₂O)₂ (An = Th, U, Np) and Cs[Np(H1.5PO₄)(PO₄)]₂, respectively, were synthesized using mild hydrothermal conditions. The first three phases are isotypic and were obtained using similar reaction conditions. Cs[Np(H1.5PO₄)(PO₄)]₂ was synthesized using an analogous method to that of Np(HPO₃)₂(H₂O)₂. However, this fourth phase is quite different in comparison to the other phases in both composition and structure. The structure of Cs[Np(H1.5PO₄)(PO₄)]₂ is constructed from double layers of neptunium(IV) phosphate with caesium cations in the interlayer region. In contrast, An(HPO₃)₂(H₂O)₂ (An = Th, U, Np) form dense 3D networks. The actinide contraction is detected in variety of metrics obtained from single-crystal X-ray diffraction data. Changes in the oxidation state of the neptunium starting materials yield different products.

  11. Using PLATO IV.

    ERIC Educational Resources Information Center

    Meller, David V.

    This beginning reference manual describes PLATO IV hardware for prospective users and provides an introduction to PLATO for new authors. The PLATO terminal is described in detail in Chapter 1. Chapter 2 provides a block diagram of the PLATO IV system. Procedures for getting on line are described in Chapter 3, and Chapter 4 provides references to…

  12. Structural materials issues for the next generation fission reactors

    NASA Astrophysics Data System (ADS)

    Chant, I.; Murty, K. L.

    2010-09-01

    Generation-IV reactor design concepts envisioned thus far cater to a common goal of providing safer, longer lasting, proliferation-resistant, and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-W reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses, and extremely corrosive environments, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This article addresses the material requirements for these advanced fission reactor types, specifically addressing structural materials issues depending on the specific application areas.

  13. Emissivity of Candidate Materials for VHTR Applicationbs: Role of Oxidation and Surface Modification Treatments

    SciTech Connect

    Sridharan, Kumar; Allen, Todd; Anderson, Mark; Cao, Guoping; Kulcinski, Gerald

    2011-07-25

    The Generation IV (GEN IV) Nuclear Energy Systems Initiative was instituted by the Department of Energy (DOE) with the goal of researching and developing technologies and materials necessary for various types of future reactors. These GEN IV reactors will employ advanced fuel cycles, passive safety systems, and other innovative systems, leading to significant differences between these future reactors and current water-cooled reactors. The leading candidate for the Next Generation Nuclear Plant (NGNP) to be built at Idaho National Lab (INL) in the United States is the Very High Temperature Reactor (VHTR). Due to the high operating temperatures of the VHTR, the Reactor Pressure Vessel (RPV) will partially rely on heat transfer by radiation for cooling. Heat expulsion by radiation will become all the more important during high temperature excursions during off-normal accident scenarios. Radiant power is dictated by emissivity, a material property. The NGNP Materials Research and Development Program Plan [1] has identified emissivity and the effects of high temperature oxide formation on emissivity as an area of research towards the development of the VHTR.

  14. A More Perfect Union: The American Government. Materials for Using American Issues Forum in the American History Classroom, Topic IV, Part II.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

    This booklet presents a set of secondary-level classroom strategies for examining American history in light of the issues identified by the American Issues Forum. Emphasis is on examination of the role and actions of the President of the United States. These materials, called modules, form Part II of the topic, "A More Perfect Union: The American…

  15. IV treatment at home

    MedlinePlus

    ... home; PICC line - home; Infusion therapy - home; Home health care - IV treatment ... Often, home health care nurses will come to your home to give you the medicine. Sometimes, a family member, a friend, or ...

  16. GCF Mark IV development

    NASA Technical Reports Server (NTRS)

    Mortensen, L. O.

    1982-01-01

    The Mark IV ground communication facility (GCF) as it is implemented to support the network consolidation program is reviewed. Changes in the GCF are made in the area of increased capacity. Common carrier circuits are the medium for data transfer. The message multiplexing in the Mark IV era differs from the Mark III era, in that all multiplexing is done in a GCF computer under GCF software control, which is similar to the multiplexing currently done in the high speed data subsystem.

  17. Fuel, Structural Material and Coolant for an Advanced Fast Micro-Reactor

    NASA Astrophysics Data System (ADS)

    Do Nascimento, J. A.; Duimarães, L. N. F.; Ono, S.

    The use of nuclear reactors in space, seabed or other Earth hostile environment in the future is a vision that some Brazilian nuclear researchers share. Currently, the USA, a leader in space exploration, has as long-term objectives the establishment of a permanent Moon base and to launch a manned mission to Mars. A nuclear micro-reactor is the power source chosen to provide energy for life support, electricity for systems, in these missions. A strategy to develop an advanced micro-reactor technologies may consider the current fast reactor technologies as back-up and the development of advanced fuel, structural and coolant materials. The next generation reactors (GEN-IV) for terrestrial applications will operate with high output temperature to allow advanced conversion cycle, such as Brayton, and hydrogen production, among others. The development of an advanced fast micro-reactor may create a synergy between the GEN-IV and space reactor technologies. Considering a set of basic requirements and materials properties this paper discusses the choice of advanced fuel, structural and coolant materials for a fast micro-reactor. The chosen candidate materials are: nitride, oxide as back-up, for fuel, lead, tin and gallium for coolant, ferritic MA-ODS and Mo alloys for core structures. The next step will be the neutronic and burnup evaluation of core concepts with this set of materials.

  18. Evaluation of Operation and Effects of Title IV Expenditures in Utah. Final Report, Volume 1.

    ERIC Educational Resources Information Center

    Wasatch Inst. for Research and Evaluation, Logan, UT.

    Summarizing the second year of a 3-year evaluation project, this nine-chapter report focuses on three Utah programs under Title IV of the Elementary and Secondary Education Act. The first program, Title IV-Part B (IV-B), provides funds for local education agency (LEA) purchases of educational materials and equipment; the second, Title IV-Part C…

  19. Interplanetary Type IV Bursts

    NASA Astrophysics Data System (ADS)

    Hillaris, A.; Bouratzis, C.; Nindos, A.

    2016-08-01

    We study the characteristics of moving type IV radio bursts that extend to hectometric wavelengths (interplanetary type IV or type {IV}_{{IP}} bursts) and their relationship with energetic phenomena on the Sun. Our dataset comprises 48 interplanetary type IV bursts observed with the Radio and Plasma Wave Investigation (WAVES) instrument onboard Wind in the 13.825 MHz - 20 kHz frequency range. The dynamic spectra of the Radio Solar Telescope Network (RSTN), the Nançay Decametric Array (DAM), the Appareil de Routine pour le Traitement et l' Enregistrement Magnetique de l' Information Spectral (ARTEMIS-IV), the Culgoora, Hiraso, and the Institute of Terrestrial Magnetism, Ionosphere and Radio Wave Propagation (IZMIRAN) Radio Spectrographs were used to track the evolution of the events in the low corona. These were supplemented with soft X-ray (SXR) flux-measurements from the Geostationary Operational Environmental Satellite (GOES) and coronal mass ejections (CME) data from the Large Angle and Spectroscopic Coronagraph (LASCO) onboard the Solar and Heliospheric Observatory (SOHO). Positional information of the coronal bursts was obtained by the Nançay Radioheliograph (NRH). We examined the relationship of the type IV events with coronal radio bursts, CMEs, and SXR flares. The majority of the events (45) were characterized as compact, their duration was on average 106 minutes. This type of events was, mostly, associated with M- and X-class flares (40 out of 45) and fast CMEs, 32 of these events had CMEs faster than 1000 km s^{-1}. Furthermore, in 43 compact events the CME was possibly subjected to reduced aerodynamic drag as it was propagating in the wake of a previous CME. A minority (three) of long-lived type {IV}_{{IP}} bursts was detected, with durations from 960 minutes to 115 hours. These events are referred to as extended or long duration and appear to replenish their energetic electron content, possibly from electrons escaping from the corresponding coronal

  20. AutoGen Version 5.0

    NASA Technical Reports Server (NTRS)

    Gladden, Roy E.; Khanampornpan, Teerapat; Fisher, Forest W.

    2010-01-01

    Version 5.0 of the AutoGen software has been released. Previous versions, variously denoted Autogen and autogen, were reported in two articles: Automated Sequence Generation Process and Software (NPO-30746), Software Tech Briefs (Special Supplement to NASA Tech Briefs), September 2007, page 30, and Autogen Version 2.0 (NPO- 41501), NASA Tech Briefs, Vol. 31, No. 10 (October 2007), page 58. To recapitulate: AutoGen (now signifying automatic sequence generation ) automates the generation of sequences of commands in a standard format for uplink to spacecraft. AutoGen requires fewer workers than are needed for older manual sequence-generation processes, and greatly reduces sequence-generation times. The sequences are embodied in spacecraft activity sequence files (SASFs). AutoGen automates generation of SASFs by use of another previously reported program called APGEN. AutoGen encodes knowledge of different mission phases and of how the resultant commands must differ among the phases. AutoGen also provides means for customizing sequences through use of configuration files. The approach followed in developing AutoGen has involved encoding the behaviors of a system into a model and encoding algorithms for context-sensitive customizations of the modeled behaviors. This version of AutoGen addressed the MRO (Mars Reconnaissance Orbiter) primary science phase (PSP) mission phase. On previous Mars missions this phase has more commonly been referred to as mapping phase. This version addressed the unique aspects of sequencing orbital operations and specifically the mission specific adaptation of orbital operations for MRO. This version also includes capabilities for MRO s role in Mars relay support for UHF relay communications with the MER rovers and the Phoenix lander.

  1. PLATO IV Accountancy Index.

    ERIC Educational Resources Information Center

    Pondy, Dorothy, Comp.

    The catalog was compiled to assist instructors in planning community college and university curricula using the 48 computer-assisted accountancy lessons available on PLATO IV (Programmed Logic for Automatic Teaching Operation) for first semester accounting courses. It contains information on lesson access, lists of acceptable abbreviations for…

  2. The PLATO IV Architecture.

    ERIC Educational Resources Information Center

    Stifle, Jack

    The PLATO IV computer-based instructional system consists of a large scale centrally located CDC 6400 computer and a large number of remote student terminals. This is a brief and general description of the proposed input/output hardware necessary to interface the student terminals with the computer's central processing unit (CPU) using available…

  3. IVS Technology Coordinator Report

    NASA Technical Reports Server (NTRS)

    Whitney, Alan

    2013-01-01

    This report of the Technology Coordinator includes the following: 1) continued work to implement the new VLBI2010 system, 2) the 1st International VLBI Technology Workshop, 3) a VLBI Digital- Backend Intercomparison Workshop, 4) DiFX software correlator development for geodetic VLBI, 5) a review of progress towards global VLBI standards, and 6) a welcome to new IVS Technology Coordinator Bill Petrachenko.

  4. Day Camp Manual: Program. Book IV.

    ERIC Educational Resources Information Center

    Babcock, William

    Book IV in a 5-book day camp manual discusses the camp program. Section I describes the organization, definition, and elements essential to successful day camp programs. Section II, which addresses the benefits and special considerations of mass programs, includes rainy day contingencies, materials to have on hand, and activity suggestions.…

  5. Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Task 5 Report: Generation IV Reactor Virtual Mockup Proof-of-Principle Study

    SciTech Connect

    Timothy Shaw; Anthony Baratta; Vaughn Whisker

    2005-02-28

    Task 5 report is part of a 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. Created a virtual mockup of PBMR reactor cavity and discussed applications of virtual mockup technology to improve Gen IV design review, construction planning, and maintenance planning.

  6. Unleashing Gen Y: Marketing Mars to Millennials

    NASA Technical Reports Server (NTRS)

    Leahy, Bart D.; Hidalgo, Loretta; Kloberdanz, Cassie

    2007-01-01

    Space advocates need to engage Generation Y (born 1977-1999).This outreach is necessary to recruit the next generation of scientists and engineers to explore Mars. Space advocates in the non-profit, private, and government sectors need to use a combination of technical communication, marketing, and politics, to develop messages that resonate with Gen Y. Until now, space messages have been generated by and for college-educated white males; Gen Y is much more diverse, including as much as one third minorities. Young women, too, need to be reached. My research has shown that messages emphasizing technology, fun, humor, and opportunity are the best means of reaching the Gen Y audience of 60 million (US population is 300 million). The important things space advocates must avoid are talking down to this generation, making false promises, or expecting them to "wait their turn" before they can participate. This is the MTV generation! We need to find ways of engaging Gen Y now to build a future where human beings can live and work on the planet Mars. In addition to the messages themselves, advocates need to keep up with Gen Y' s social networking and use of iPods, cell phones, and the Internet. NASA and space advocacy groups can use these tools for "viral marketing," where young people share targeted space-related information via cell phones or the Internet because they like it. Overall, Gen Y is a socially dynamic and media-savvy group; advocates' space messages need to be sincere, creative, and placed in locations where Gen Y lives. Mars messages must be memorable!

  7. FORTRAN IV Digital Filter Design Programs. Digital Systems Education Project.

    ERIC Educational Resources Information Center

    Reuss, E.; And Others

    The goals of the Digital Systems Education Project (DISE) include the development and distribution of educational/instructional materials in the digital systems area. Toward that end, this document contains three reports: (1) A FORTRAN IV Design Program for Low-Pass Butterworth and Chebychev Digital Filters; (2) A FORTRAN IV Design Program for…

  8. Enhanced Design Alternative IV

    SciTech Connect

    N. E. Kramer

    1999-05-18

    This report evaluates Enhanced Design Alternative (EDA) IV as part of the second phase of the License Application Design Selection (LADS) effort. The EDA IV concept was compared to the VA reference design using criteria from the ''Design Input Request for LADS Phase II EDA Evaluations'' (CRWMS M&O 1999b) and (CRWMS M&O 1999f). Briefly, the EDA IV concept arranges the waste packages close together in an emplacement configuration known as ''line load''. Continuous pre-closure ventilation keeps the waste packages from exceeding the 350 C cladding and 200 C (4.3.13) drift wall temperature limits. This EDA concept keeps relatively high, uniform emplacement drift temperatures (post-closure) to drive water away from the repository and thus dry out the pillars between emplacement drifts. The waste package is shielded to permit human access to emplacement drifts and includes an integral filler inside the package to reduce the amount of water that can contact the waste form. Closure of the repository is desired 50 years after first waste is emplaced. Both backfill and a drip shields will be emplaced at closure to improve post-closure performance.

  9. A sputnik IV saga

    NASA Astrophysics Data System (ADS)

    Lundquist, Charles A.

    2009-12-01

    The Sputnik IV launch occurred on May 15, 1960. On May 19, an attempt to deorbit a 'space cabin' failed and the cabin went into a higher orbit. The orbit of the cabin was monitored and Moonwatch volunteer satellite tracking teams were alerted to watch for the vehicle demise. On September 5, 1962, several team members from Milwaukee, Wisconsin made observations starting at 4:49 a.m. of a fireball following the predicted orbit of Sputnik IV. Requests went out to report any objects found under the fireball path. An early morning police patrol in Manitowoc had noticed a metal object on a street and had moved it to the curb. Later the officers recovered the object and had it dropped off at the Milwaukee Journal. The Moonwarch team got the object and reported the situation to Moonwatch Headquarters at the Smithsonian Astrophysical Observatory. A team member flew to Cambridge with the object. It was a solid, 9.49 kg piece of steel with a slag-like layer attached to it. Subsequent analyses showed that it contained radioactive nuclei produced by cosmic ray exposure in space. The scientists at the Observatory quickly recognized that measurements of its induced radioactivity could serve as a calibration for similar measurements of recently fallen nickel-iron meteorites. Concurrently, the Observatory directorate informed government agencies that a fragment from Sputnik IV had been recovered. Coincidently, a debate in the UN Committee on Peaceful Uses of Outer Space involved the issue of liability for damage caused by falling satellite fragments. On September 12, the Observatory delivered the bulk of the fragment to the US Delegation to the UN. Two days later, the fragment was used by US Ambassador Francis Plimpton as an exhibit that the time had come to agree on liability for damage from satellite debris. He offered the Sputnik IV fragment to USSR Ambassador P.D. Morozov, who refused the offer. On October 23, Drs. Alla Massevitch and E.K. Federov of the USSR visited the

  10. LIFE Materials: Phase Formation and Transformations in Transmutation Fuel Materials for the LIFE Engine Part I - Path Forward Volume 3

    SciTech Connect

    Turchi, P A; Kaufman, L; Fluss, M

    2008-12-19

    The current specifications of the LLNL fusion-fission hybrid proposal, namely LIFE, impose severe constraints on materials, and in particular on the nuclear fissile or fertile nuclear fuel and its immediate environment. This constitutes the focus of the present report with special emphasis on phase formation and phase transformations of the transmutation fuel and their consequences on particle and pebble thermal, chemical, and mechanical integrities. We first review the work that has been done in recent years to improve materials properties under the Gen-IV project, and with in particular applications to HTGR and MSR, and also under GNEP and AFCI in the USA. Our goal is to assess the nuclear fuel options that currently exist together with their issues. Among the options, it is worth mentioning TRISO, IMF, and molten salts. The later option will not be discussed in details since an entire report (Volume 8 - Molten-salt Fuels) is dedicated to it. Then, in a second part, with the specific LIFE specifications in mind, the various fuel options with their most critical issues are revisited with a path forward for each of them in terms of research, both experimental and theoretical. Since LIFE is applicable to very high burn-up of various fuels, distinctions will be made depending on the mission, i.e., energy production or incineration. Finally a few conclusions are drawn in terms of the specific needs for integrated materials modeling and the in depth knowledge on time-evolution thermo-chemistry that controls and drastically affects the performance of the nuclear materials and their immediate environment. Although LIFE demands materials that very likely have not yet been fully optimized, the challenges are not insurmountable, and a well concerted experimental-modeling effort should lead to dramatic advances that should well serve other fission programs such as Gen-IV, GNEP, AFCI as well as the international fusion program, ITER.

  11. PMD IVS Analysis Center

    NASA Technical Reports Server (NTRS)

    Tornatore, Vincenza

    2013-01-01

    The main activities carried out at the PMD (Politecnico di Milano DIIAR) IVS Analysis Center during 2012 are briefly higlighted, and future plans for 2013 are sketched out. We principally continued to process European VLBI sessions using different approaches to evaluate possible differences due to various processing choices. Then VLBI solutions were also compared to the GPS ones as well as the ones calculated at co-located sites. Concerning the observational aspect, several tests were performed to identify the most suitable method to achieve the highest possible accuracy in the determination of GNSS (GLOBAL NAVIGATION SATELLITE SYSTEM) satellite positions using the VLBI technique.

  12. Tools for Designing, Evaluating, and Certifying NextGen Technologies and Procedures: Automation Roles and Responsibilities

    NASA Technical Reports Server (NTRS)

    Kanki, Barbara G.

    2011-01-01

    Barbara Kanki from NASA Ames Research Center will discuss research that focuses on the collaborations between pilots, air traffic controllers and dispatchers that will change in NextGen systems as automation increases and roles and responsibilities change. The approach taken by this NASA Ames team is to build a collaborative systems assessment template (CSAT) based on detailed task descriptions within each system to establish a baseline of the current operations. The collaborative content and context are delineated through the review of regulatory and advisory materials, policies, procedures and documented practices as augmented by field observations and interviews. The CSAT is developed to aid the assessment of key human factors and performance tradeoffs that result from considering different collaborative arrangements under NextGen system changes. In theory, the CSAT product may be applied to any NextGen application (such as Trajectory Based Operations) with specified ground and aircraft capabilities.

  13. Non-destructive research methods applied on materials for the new generation of nuclear reactors

    NASA Astrophysics Data System (ADS)

    Bartošová, I.; Slugeň, V.; Veterníková, J.; Sojak, S.; Petriska, M.; Bouhaddane, A.

    2014-06-01

    The paper is aimed on non-destructive experimental techniques applied on materials for the new generation of nuclear reactors (GEN IV). With the development of these reactors, also materials have to be developed in order to guarantee high standard properties needed for construction. These properties are high temperature resistance, radiation resistance and resistance to other negative effects. Nevertheless the changes in their mechanical properties should be only minimal. Materials, that fulfil these requirements, are analysed in this work. The ferritic-martensitic (FM) steels and ODS steels are studied in details. Microstructural defects, which can occur in structural materials and can be also accumulated during irradiation due to neutron flux or alpha, beta and gamma radiation, were analysed using different spectroscopic methods as positron annihilation spectroscopy and Barkhausen noise, which were applied for measurements of three different FM steels (T91, P91 and E97) as well as one ODS steel (ODS Eurofer).

  14. Surgical research IV.

    PubMed

    Toledo-Pereyra, Luis H

    2010-08-01

    Harvey W. Cushing (1869-1939) is the only surgeon represented in Surgical Research IV and one of the most accomplished American contributors to surgical research in general and to neurological and endocrine surgery research in particular. Other surgical research leaders of the 19th and 20th centuries who preceded Harvey Cushing have been introduced before. First, we highlighted the "importance of medical and surgical research" as the basic elements in the advancement of medicine and surgery could be considered as Surgical Research I. Second, in Surgical Research II, we presented William Beaumont, Samuel Gross, and William Halsted as the most important participants of the first wave of American surgical researchers. Next, in Surgical Research III, we considered surgeon researchers who moved ahead in the field of surgery with their research initiatives at the time, including John B. Murphy, the Mayo Brothers William J. and Charles H. Mayo, and George W. Crile. With Harvey Cushing, we enter an era of surgical research associated with neurosurgery and endocrine surgery as part of Surgical Research IV. PMID:20690841

  15. Division Iv: Stars

    NASA Astrophysics Data System (ADS)

    Corbally, Christopher; D'Antona, Francesca; Spite, Monique; Asplund, Martin; Charbonnel, Corinne; Docobo, Jose Angel; Gray, Richard O.; Piskunov, Nikolai E.

    2012-04-01

    This Division IV was started on a trial basis at the General Assembly in The Hague 1994 and was formally accepted at the Kyoto General Assembly in 1997. Its broad coverage of ``Stars'' is reflected in its relatively large number of Commissions and so of members (1266 in late 2011). Its kindred Division V, ``Variable Stars'', has the same history of its beginning. The thinking at the time was to achieve some kind of balance between the number of members in each of the 12 Divisions. Amid the current discussion of reorganizing the number of Divisions into a more compact form it seems advisable to make this numerical balance less of an issue than the rationalization of the scientific coverage of each Division, so providing more effective interaction within a particular field of astronomy. After all, every star is variable to a certain degree and such variability is becoming an ever more powerful tool to understand the characteristics of every kind of normal and peculiar star. So we may expect, after hearing the reactions of members, that in the restructuring a single Division will result from the current Divisions IV and V.

  16. 78 FR 2390 - CSOLAR IV South, LLC, Wistaria Ranch Solar, LLC, CSOLAR IV West, LLC, CSOLAR IV North, LLC v...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-11

    ... Energy Regulatory Commission CSOLAR IV South, LLC, Wistaria Ranch Solar, LLC, CSOLAR IV West, LLC, CSOLAR IV North, LLC v. California Independent System Operator Corporation; Notice of Complaint Take notice... IV South, LLC, Wistaria Ranch Solar, LLC, CSOLAR IV West, LLC and CSOLAR IV North, LLC...

  17. VIEW OF GEN. LOGAN STATUE LOOKING SOUTHWEST WITH VISTA AS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF GEN. LOGAN STATUE LOOKING SOUTHWEST WITH VISTA AS TO THE GEN. THOMAS STATUE DOWN VERMONT AVENUE AND THE GEN. SCOTT STATUE DOWN RHODE ISLAND AVENUE IN THE BACKGROUND - Logan Circle, Vermont Avenue, Rhode Island Avenue, & Thirteenth Street, Washington, District of Columbia, DC

  18. 77 FR 2342 - Fifth Meeting: RTCA, Next Gen Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... TRANSPORTATION Federal Aviation Administration Fifth Meeting: RTCA, Next Gen Advisory Committee AGENCY: Federal Aviation Administration (FAA), U.S. Department of Transportation (DOT). ACTION: Notice of RTCA, NextGen... RTCA, NextGen Advisory Committee. DATES: The meeting will be held February 3, 2012, from 9:30...

  19. Consistent Multigroup Theory Enabling Accurate Course-Group Simulation of Gen IV Reactors

    SciTech Connect

    Rahnema, Farzad; Haghighat, Alireza; Ougouag, Abderrafi

    2013-11-29

    The objective of this proposal is the development of a consistent multi-group theory that accurately accounts for the energy-angle coupling associated with collapsed-group cross sections. This will allow for coarse-group transport and diffusion theory calculations that exhibit continuous energy accuracy and implicitly treat cross- section resonances. This is of particular importance when considering the highly heterogeneous and optically thin reactor designs within the Next Generation Nuclear Plant (NGNP) framework. In such reactors, ignoring the influence of anisotropy in the angular flux on the collapsed cross section, especially at the interface between core and reflector near which control rods are located, results in inaccurate estimates of the rod worth, a serious safety concern. The scope of this project will include the development and verification of a new multi-group theory enabling high-fidelity transport and diffusion calculations in coarse groups, as well as a methodology for the implementation of this method in existing codes. This will allow for a higher accuracy solution of reactor problems while using fewer groups and will reduce the computational expense. The proposed research represents a fundamental advancement in the understanding and improvement of multi- group theory for reactor analysis.

  20. Optimized, Competitive Supercritical-CO2 Cycle GFR for Gen IV Service

    SciTech Connect

    M.J. Driscoll; P. Hejzlar; G. Apostolakis

    2008-09-08

    An overall plant design was developed for a gas-cooled fast reactor employing a direct supercritical Brayton power conversion system. The most important findings were that (1) the concept could be capital-cost competitive, but startup fuel cycle costs are penalized by the low core power density, specified in large part to satisfy the goal of significatn post-accident passive natural convection cooling; (2) active decay heat removal is preferable as the first line of defense, with passive performance in a backup role; (3) an innovative tube-in-duct fuel assembly, vented to the primpary coolant, appears to be practicable; and (4) use of the S-Co2 GFR to support hydrogen production is a synergistic application, since sufficient energy can be recuperated from the product H2 and 02 to allow the electrolysis cell to run 250 C hotter than the reactor coolant, and the water boilers can be used for reactor decay heat removal. Increasing core poer density is identified as the top priority for future work on GFRs of this type.

  1. VitisGen: accelerating grape cultivar improvement

    Technology Transfer Automated Retrieval System (TEKTRAN)

    VitisGen is a multiple institute collaborative project funded by the USDA SCRI program, with a long term goal to accelerate grape cultivar improvement by using cutting-edge molecular marker technologies, rigorous centralized facilities to characterize traits, and molecular breeding expertise. The ge...

  2. Thermoelectric materials and devices

    NASA Technical Reports Server (NTRS)

    Park, Yeonjoon (Inventor); Choi, Sang H. (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor); Talcott, Noel A. (Inventor)

    2011-01-01

    New thermoelectric materials comprise highly [111]-oriented twinned group IV alloys on the basal plane of trigonal substrates, which exhibit a high thermoelectric figure of merit and good material performance, and devices made with these materials.

  3. dBASE IV basics

    SciTech Connect

    O`Connor, P.

    1994-09-01

    This is a user`s manual for dBASE IV. dBASE IV is a popular software application that can be used on your personal computer to help organize and maintain your database files. It is actually a set of tools with which you can create, organize, select and manipulate data in a simple yet effective manner. dBASE IV offers three methods of working with the product: (1) control center: (2) command line; and (3) programming.

  4. Confirmatory Factor Analysis of the WAIS-IV/WMS-IV

    ERIC Educational Resources Information Center

    Holdnack, James A.; Zhou, Xiaobin; Larrabee, Glenn J.; Millis, Scott R.; Salthouse, Timothy A.

    2011-01-01

    The Wechsler Adult Intelligence Scale-fourth edition (WAIS-IV) and the Wechsler Memory Scale-fourth edition (WMS-IV) were co-developed to be used individually or as a combined battery of tests. The independent factor structure of each of the tests has been identified; however, the combined factor structure has yet to be determined. Confirmatory…

  5. Improving IV-A/IV-D Interface. Trainer Guide.

    ERIC Educational Resources Information Center

    National Inst. for Child Support Enforcement, Chevy Chase, MD.

    Effective interface between the Aid to Families with Dependent Children (IV-A) and the Child Support Enforcement (IV-D) programs is a key factor in assisting families in becoming self-sufficient, reducing welfare expenditures, and enforcing parental responsibility to support their children. Consequently, overcoming the procedural, technological,…

  6. Improving IV-A/IV-D Interface. Handbook.

    ERIC Educational Resources Information Center

    National Inst. for Child Support Enforcement, Chevy Chase, MD.

    Effective interface between the Aid to Families with Dependent Children (IV-A) and the Child Support Enforcement (IV-D) programs is a key factor in assisting families in becoming self-sufficient, reducing welfare expenditures, and enforcing parental responsibility to support their children. Consequently, overcoming the procedural, technological,…

  7. NATIONAL COASTAL CONDITION REPORT IV

    EPA Science Inventory

    The National Coastal Condition Report IV (NCCR IV) is the fourth in a series of environmental assessments of U.S. coastal waters and the Great Lakes. The report includes assessments of all the nation’s estuaries in the contiguous 48 states and Puerto Rico, south-eastern Alaska, ...

  8. Safety Assurance in NextGen

    NASA Technical Reports Server (NTRS)

    HarrisonFleming, Cody; Spencer, Melissa; Leveson, Nancy; Wilkinson, Chris

    2012-01-01

    The generation of minimum operational, safety, performance, and interoperability requirements is an important aspect of safely integrating new NextGen components into the Communication Navigation Surveillance and Air Traffic Management (CNS/ATM) system. These requirements are used as part of the implementation and approval processes. In addition, they provide guidance to determine the levels of design assurance and performance that are needed for each element of the new NextGen procedures, including aircraft, operator, and Air Navigation and Service Provider. Using the enhanced Airborne Traffic Situational Awareness for InTrail Procedure (ATSA-ITP) as an example, this report describes some limitations of the current process used for generating safety requirements and levels of required design assurance. An alternative process is described, as well as the argument for why the alternative can generate more comprehensive requirements and greater safety assurance than the current approach.

  9. GEN3D Ver. 1.37

    SciTech Connect

    2012-01-04

    GEN3D is a three-dimensional mesh generation program. The three-dimensional mesh is generated by mapping a two-dimensional mesh into threedimensions according to one of four types of transformations: translating, rotating, mapping onto a spherical surface, and mapping onto a cylindrical surface. The generated three-dimensional mesh can then be reoriented by offsetting, reflecting about an axis, and revolving about an axis. GEN3D can be used to mesh geometries that are axisymmetric or planar, but, due to three-dimensional loading or boundary conditions, require a three-dimensional finite element mesh and analysis. More importantly, it can be used to mesh complex three-dimensional geometries composed of several sections when the sections can be defined in terms of transformations of two dimensional geometries. The code GJOIN is then used to join the separate sections into a single body. GEN3D reads and writes twodimensional and threedimensional mesh databases in the GENESIS database format; therefore, it is compatible with the preprocessing, postprocessing, and analysis codes used by the Engineering Analysis Department at Sandia National Laboratories, Albuquerque, NM.

  10. GEN3D Ver. 1.37

    2012-01-04

    GEN3D is a three-dimensional mesh generation program. The three-dimensional mesh is generated by mapping a two-dimensional mesh into threedimensions according to one of four types of transformations: translating, rotating, mapping onto a spherical surface, and mapping onto a cylindrical surface. The generated three-dimensional mesh can then be reoriented by offsetting, reflecting about an axis, and revolving about an axis. GEN3D can be used to mesh geometries that are axisymmetric or planar, but, due to three-dimensionalmore » loading or boundary conditions, require a three-dimensional finite element mesh and analysis. More importantly, it can be used to mesh complex three-dimensional geometries composed of several sections when the sections can be defined in terms of transformations of two dimensional geometries. The code GJOIN is then used to join the separate sections into a single body. GEN3D reads and writes twodimensional and threedimensional mesh databases in the GENESIS database format; therefore, it is compatible with the preprocessing, postprocessing, and analysis codes used by the Engineering Analysis Department at Sandia National Laboratories, Albuquerque, NM.« less

  11. Generic classification of the Archiborborinae (Diptera: Sphaeroceridae), with a revision of Antrops Enderlein, Coloantrops gen. nov., Maculantrops gen. nov., Photoantrops gen. nov., and Poecilantrops gen. nov.

    PubMed

    Kits, Joel H; Marshall, Stephen A

    2013-01-01

    The Archiborborinae comprise a diverse clade of flies in the family Sphaeroceridae. We here revise the generic classification, redefining the genus Antrops Enderlein and naming 5 new genera: Boreantrops gen. nov., Coloantrops gen. nov., Maculantrops gen. nov., Photoantrops gen. nov., and Poecilantrops gen. nov. The genus Archiborborus, until recently a paraphyletic assemblage including most of the described species in the subfamily, is treated as a junior synonym of Antrops (syn. nov.) We revise the genera Antrops (53 species, including 40 sp. nov.: Antrops anovariegatus, Antrops aurantifemur, Antrops baeza, Antrops bellavista, Antrops biflavus, Antrops bucki, Antrops carpishensis, Antrops cochabamba, Antrops cochinoca, Antrops coniobaptos, Antrops coroico, Antrops cotopaxi, Antrops didactylos, Antrops diversipennis, Antrops eurus, Antrops fulgiceps, Antrops fuliginosus, Antrops guandera, Antrops guaramacalensis, Antrops inca, Antrops juninensis, Antrops mucarensis, Antrops niger, Antrops papallacta, Antrops pecki, Antrops podocarpus, Antrops quadrilobus, Antrops siberia, Antrops sierrazulensis, Antrops tachira, Antrops tequendama, Antrops tetrastichus, Antrops tumbrensis, Antrops unduavi, Antrops variegatus, Antrops versabilis, Antrops vittatus, Antrops yungas, and Antrops zongo and the following comb. nov.: Antrops annulatus (Richards), Antrops chaetosus (Richards), Antrops femoralis (Blanchard), Antrops hirtus (Bigot), Antrops maculipennis (Duda), Antrops maximus (Richards), Antrops microphthalmus (Richards), Antrops quadrinotus (Bigot), Antrops setosus (Duda), Antrops simplicimanus (Richards), Antrops nitidicollis (Becker), and Antrops orbitalis (Duda)), Coloantrops (1 species: Coloantrops daedalus, sp. nov.), Maculantrops (2 species, Maculantrops hirtipes (Macquart) comb. nov. and Maculantrops altiplanus, sp. nov.), Photoantrops (1 species: Pho-toantrops echinus sp. nov.), and Poecilantrops (10 species: Poecilantrops baorucensis, Poecilantrops boraceiensis

  12. Aqueous complexation of thorium(IV), uranium(IV), neptunium(IV), plutonium(III/IV), and cerium(III/IV) with DTPA.

    PubMed

    Brown, M Alex; Paulenova, Alena; Gelis, Artem V

    2012-07-16

    Aqueous complexation of Th(IV), U(IV), Np(IV), Pu(III/IV), and Ce(III/IV) with DTPA was studied by potentiometry, absorption spectrophotometry, and cyclic voltammetry at 1 M ionic strength and 25 °C. The stability constants for the 1:1 complex of each trivalent and tetravalent metal were calculated. From the potentiometric data, we report stability constant values for Ce(III)DTPA, Ce(III)HDTPA, and Th(IV)DTPA of log β(101) = 20.01 ± 0.02, log β(111) = 22.0 ± 0.2, and log β(101) = 29.6 ± 1, respectively. From the absorption spectrophotometry data, we report stability constant values for U(IV)DTPA, Np(IV)DTPA, and Pu(IV)DTPA of log β(101) = 31.8 ± 0.1, 32.3 ± 0.1, and 33.67 ± 0.02, respectively. From the cyclic voltammetry data, we report stability constant values for Ce(IV) and Pu(III) of log β(101) = 34.04 ± 0.04 and 20.58 ± 0.04, respectively. The values obtained in this work are compared and discussed with respect to the ionic radius of each cationic metal.

  13. Phase Formation and Transformations in Transmutation Fuel Materials for the LIFE Engine Part I - Path Forward

    SciTech Connect

    Turchi, P E; Kaufman, L; Fluss, M J

    2008-11-10

    The current specifications of the LLNL fusion-fission hybrid proposal, namely LIFE, impose severe constraints on materials, and in particular on the nuclear fissile or fertile nuclear fuel and its immediate environment. This constitutes the focus of the present report with special emphasis on phase formation and phase transformations of the transmutation fuel and their consequences on particle and pebble thermal, chemical and mechanical integrities. We first review the work that has been done in recent years to improve materials properties under the Gen-IV project, and with in particular applications to HTGR and MSR, and also under GNEP and AFCI in the USA. Our goal is to assess the nuclear fuel options that currently exist together with their issues. Among the options, it is worth mentioning TRISO, IMF, and molten salts. The later option will not be discussed in details since an entire report is dedicated to it. Then, in a second part, with the specific LIFE specifications in mind, the various fuel options with their most critical issues are revisited with a path forward for each of them in terms of research, both experimental and theoretical. Since LIFE is applicable to very high burn-up of various fuels, distinctions will be made depending on the mission, i.e., energy production or incineration. Finally a few conclusions are drawn in terms of the specific needs for integrated materials modeling and the in depth knowledge on time-evolution thermochemistry that controls and drastically affects the performance of the nuclear materials and their immediate environment. Although LIFE demands materials that very likely have not yet been fully optimized, the challenge are not insurmountable and a well concerted experimental-modeling effort should lead to dramatic advances that should well serve other fission programs such as Gen-IV, GNEP, AFCI as well as the international fusion program, ITER.

  14. Generation-IV Nuclear Energy Systems

    NASA Astrophysics Data System (ADS)

    McFarlane, Harold

    2008-05-01

    Nuclear power technology has evolved through roughly three generations of system designs: a first generation of prototypes and first-of-a-kind units implemented during the period 1950 to 1970; a second generation of industrial power plants built from 1970 to the turn of the century, most of which are still in operation today; and a third generation of evolutionary advanced reactors which began being built by the turn of the 20^th century, usually called Generation III or III+, which incorporate technical lessons learned through more than 12,000 reactor-years of operation. The Generation IV International Forum (GIF) is a cooperative international endeavor to develop advanced nuclear energy systems in response to the social, environmental and economic requirements of the 21^st century. Six Generation IV systems under development by GIF promise to enhance the future contribution and benefits of nuclear energy. All Generation IV systems aim at performance improvement, new applications of nuclear energy, and/or more sustainable approaches to the management of nuclear materials. High-temperature systems offer the possibility of efficient process heat applications and eventually hydrogen production. Enhanced sustainability is achieved primarily through adoption of a closed fuel cycle with reprocessing and recycling of plutonium, uranium and minor actinides using fast reactors. This approach provides significant reduction in waste generation and uranium resource requirements.

  15. Structure of a type IV secretion system.

    PubMed

    Low, Harry H; Gubellini, Francesca; Rivera-Calzada, Angel; Braun, Nathalie; Connery, Sarah; Dujeancourt, Annick; Lu, Fang; Redzej, Adam; Fronzes, Rémi; Orlova, Elena V; Waksman, Gabriel

    2014-04-24

    Bacterial type IV secretion systems translocate virulence factors into eukaryotic cells, distribute genetic material between bacteria and have shown potential as a tool for the genetic modification of human cells. Given the complex choreography of the substrate through the secretion apparatus, the molecular mechanism of the type IV secretion system has proved difficult to dissect in the absence of structural data for the entire machinery. Here we use electron microscopy to reconstruct the type IV secretion system encoded by the Escherichia coli R388 conjugative plasmid. We show that eight proteins assemble in an intricate stoichiometric relationship to form an approximately 3 megadalton nanomachine that spans the entire cell envelope. The structure comprises an outer membrane-associated core complex connected by a central stalk to a substantial inner membrane complex that is dominated by a battery of 12 VirB4 ATPase subunits organized as side-by-side hexameric barrels. Our results show a secretion system with markedly different architecture, and consequently mechanism, to other known bacterial secretion systems. PMID:24670658

  16. Crystal growth, structure, and properties, of a new oxovanadium(IV) phosphate material, [H2en]4[V7P8O35(OH)6(H2O)]·3H2O prepared via a mild one step hydrothermal route

    NASA Astrophysics Data System (ADS)

    Cortese, Anthony J.; Smith, Mark D.; zur Loye, Hans-Conrad

    2016-10-01

    One new oxovanadium(IV) phosphate material, [H2en]4[V7P8O35(OH)6(H2O)]·3H2O was prepared utilizing a one step, mild hydrothermal route involving ethylenediamine as the reducing agent. The compound was structurally characterized by single crystal and powder X-ray diffraction methods and found to crystallize in the monoclinic space group C2/c. The temperature dependence of the magnetic susceptibility of was measured and found to be paramagnetic down to 2 K. The compound was further characterized by IR and UV-Vis spectroscopies.

  17. TidGen Power System Commercialization Project

    SciTech Connect

    Sauer, Christopher R.; McEntee, Jarlath

    2013-12-30

    ORPC Maine, LLC, a wholly-owned subsidiary of Ocean Renewable Power Company, LLC (collectively ORPC), submits this Final Technical Report for the TidGen® Power System Commercialization Project (Project), partially funded by the U.S. Department of Energy (DE-EE0003647). The Project was built and operated in compliance with the Federal Energy Regulatory Commission (FERC) pilot project license (P-12711) and other permits and approvals needed for the Project. This report documents the methodologies, activities and results of the various phases of the Project, including design, engineering, procurement, assembly, installation, operation, licensing, environmental monitoring, retrieval, maintenance and repair. The Project represents a significant achievement for the renewable energy portfolio of the U.S. in general, and for the U.S. marine hydrokinetic (MHK) industry in particular. The stated Project goal was to advance, demonstrate and accelerate deployment and commercialization of ORPC’s tidal-current based hydrokinetic power generation system, including the energy extraction and conversion technology, associated power electronics, and interconnection equipment capable of reliably delivering electricity to the domestic power grid. ORPC achieved this goal by designing, building and operating the TidGen® Power System in 2012 and becoming the first federally licensed hydrokinetic tidal energy project to deliver electricity to a power grid under a power purchase agreement in North America. Located in Cobscook Bay between Eastport and Lubec, Maine, the TidGen® Power System was connected to the Bangor Hydro Electric utility grid at an on-shore station in North Lubec on September 13, 2012. ORPC obtained a FERC pilot project license for the Project on February 12, 2012 and the first Maine Department of Environmental Protection General Permit issued for a tidal energy project on January 31, 2012. In addition, ORPC entered into a 20-year agreement with Bangor Hydro Electric

  18. Materials

    NASA Technical Reports Server (NTRS)

    Glaessgen, Edward H.; Schoeppner, Gregory A.

    2006-01-01

    NASA Langley Research Center has successfully developed an electron beam freeform fabrication (EBF3) process, a rapid metal deposition process that works efficiently with a variety of weldable alloys. The EBF3 process can be used to build a complex, unitized part in a layer-additive fashion, although the more immediate payoff is for use as a manufacturing process for adding details to components fabricated from simplified castings and forgings or plate products. The EBF3 process produces structural metallic parts with strengths comparable to that of wrought product forms and has been demonstrated on aluminum, titanium, and nickel-based alloys to date. The EBF3 process introduces metal wire feedstock into a molten pool that is created and sustained using a focused electron beam in a vacuum environment. Operation in a vacuum ensures a clean process environment and eliminates the need for a consumable shield gas. Advanced metal manufacturing methods such as EBF3 are being explored for fabrication and repair of aerospace structures, offering potential for improvements in cost, weight, and performance to enhance mission success for aircraft, launch vehicles, and spacecraft. Near-term applications of the EBF3 process are most likely to be implemented for cost reduction and lead time reduction through addition of details onto simplified preforms (casting or forging). This is particularly attractive for components with protruding details that would require a significantly large volume of material to be machined away from an oversized forging, offering significant reductions to the buy-to-fly ratio. Future far-term applications promise improved structural efficiency through reduced weight and improved performance by exploiting the layer-additive nature of the EBF3 process to fabricate tailored unitized structures with functionally graded microstructures and compositions.

  19. Back to the FutureGen?

    SciTech Connect

    Buchsbaum, L.

    2009-04-15

    After years of political wrangling, Democrats may green-light the experimental clean coal power plants. The article relates how the project came to be curtailed, how Senator Dick Durbin managed to protect $134 million in funding for FutureGen in Mattoon, and how once Obama was in office a $2 billion line item to fund a 'near zero emissions power plant(s)' was placed in the Senate version of the Stimulus Bill. The final version of the legislation cut the funding to $1 billion for 'fossil energy research and development'. In December 2008 the FutureGen Alliance and the City of Mattoon spent $6.5 billion to purchase the plants eventual 440 acre site. A report by the Government Accountability Office (GAO) said that Bush's inaction may have set back clean coal technology in the US by as much as a decade. If additional funding comes through construction of the plant could start in 2010. 1 fig., 1 photo.

  20. Towards an International Culture: Gen Y Students and SNS?

    ERIC Educational Resources Information Center

    Lichy, Jessica

    2012-01-01

    This article reports the findings of a small-scale investigation into the Internet user behaviour of generation Y (Gen Y) students, with particular reference to social networking sites. The study adds to the literature on cross-cultural Internet user behaviour with specific reference to Gen Y and social networking. It compares how a cohort of…

  1. Hoja informativa de pruebas genéticas

    Cancer.gov

    Trata de pruebas genéticas para riesgos heredados de cáncer; incluye tipos de pruebas, para quién son, explicación y confidencialidad de los resultados. Ofrece información de pruebas genéticas a domicilio o pruebas para el consumidor.

  2. Prognostic factors in stages II/III/IV and stages III/IV endometrioid and serous adenocarcinoma of the endometrium

    PubMed Central

    Mhawech-Fauceglia, P.; Herrmann, R.F.; Kesterson, J.; Izevbaye, I.; Lele, S.; Odunsi, K.

    2016-01-01

    Aims To explore and to compare the outcome of patients diagnosed with stage II/III/IV and stage III/IV endometrioid adenocarcinoma (EAC) with their serous carcinoma (USC) counterparts. Materials and methods A total of 107 patients (73 EAC and 34 USC) were evaluated. For statistical analysis, the following baseline variables were considered for their prognostic value: the patient’s age at presentation, the tumor size, the depth of myometrial invasion (MI), the lympho-vascular involvement (LVI) and the USC and the EAC subtypes (considered as binary variables). Disease free survival (DFS), death of disease (DOD) and overall survival (OS) were assessed using univariate and multiple Cox proportional hazards models. Results In univariate analysis, USC tends to recur more frequently than EAC (p = 0.004), a finding that disappeared in multivariate analysis. Furthermore, tumor histology had no significance in predicting the tumor outcomes. Among all of the prognostic factors and after adjusting for the aforementioned variables, MI ≥50% was the only independent factor in predicting DOD in stages II/III/IV (p = 0.009) and in stages III/IV (p = 0.004). MI was also an independent predictive factor for OS (p = 0.02) and early recurrences in stages III/IV. LVI was the only independent factor in predicting recurrences (p = 0.004) in stages II/III/IV but not in stages III/IV. Conclusion Based on our study, tumor histology was not a significant factor in predicting disease outcome in stages II/III/IV and II/IV. Despite our limited sample size, we believe that our findings provide meaningful insights into the clinical study of endometrial cancer patients which in turn warrants further investigation. PMID:20926229

  3. The Integrated Airport: Building a Successful NextGen Testbed

    ScienceCinema

    Frederick-Recascino, Christina [Embry-Riddle Aeronautical University, Daytona Beach, Florida, United States; Sweigard, Doug [Lockheed Martin Corporation; Lester, Wade [ERAU

    2016-07-12

    This presentation will describe a unique public-private partnership - the Integrated Airport - that was created to engage in research and testing related to NextGen Technology deployment.  NextGen refers to the program that will be initiated to modernize the US National Airspace.  As with any major, multi-decade initiative, such as NextGen, integration of work efforts by multiple partners in the modernization is critical for success.  This talk will focus on the development of the consortium, how the consortium plans for NextGen initiatives, the series of technology demonstrations we have produced and plans for the future of NextGen testing and implementation. 

  4. GenVisR: Genomic Visualizations in R

    PubMed Central

    Skidmore, Zachary L.; Wagner, Alex H.; Lesurf, Robert; Campbell, Katie M.; Kunisaki, Jason; Griffith, Obi L.; Griffith, Malachi

    2016-01-01

    Summary: Visualizing and summarizing data from genomic studies continues to be a challenge. Here, we introduce the GenVisR package to addresses this challenge by providing highly customizable, publication-quality graphics focused on cohort level genome analyses. GenVisR provides a rapid and easy-to-use suite of genomic visualization tools, while maintaining a high degree of flexibility by leveraging the abilities of ggplot2 and Bioconductor. Availability and Implementation: GenVisR is an R package available via Bioconductor (https://bioconductor.org/packages/GenVisR) under GPLv3. Support is available via GitHub (https://github.com/griffithlab/GenVisR/issues) and the Bioconductor support website. Contacts: obigriffith@wustl.edu or mgriffit@wustl.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:27288499

  5. Investigation of a Novel NDE Method for Monitoring Thermomechanical Damage and Microstructure Evolution in Ferritic-Martensitic Steels for Generation IV Nuclear Energy Systems

    SciTech Connect

    Nagy, Peter

    2013-09-30

    The main goal of the proposed project is the development of validated nondestructive evaluation (NDE) techniques for in situ monitoring of ferritic-martensitic steels like Grade 91 9Cr-1Mo, which are candidate materials for Generation IV nuclear energy structural components operating at temperatures up to ~650{degree}C and for steam-generator tubing for sodium-cooled fast reactors. Full assessment of thermomechanical damage requires a clear separation between thermally activated microstructural evolution and creep damage caused by simultaneous mechanical stress. Creep damage can be classified as "negligible" creep without significant plastic strain and "ordinary" creep of the primary, secondary, and tertiary kind that is accompanied by significant plastic deformation and/or cavity nucleation and growth. Under negligible creep conditions of interest in this project, minimal or no plastic strain occurs, and the accumulation of creep damage does not significantly reduce the fatigue life of a structural component so that low-temperature design rules, such as the ASME Section III, Subsection NB, can be applied with confidence. The proposed research project will utilize a multifaceted approach in which the feasibility of electrical conductivity and thermo-electric monitoring methods is researched and coupled with detailed post-thermal/creep exposure characterization of microstructural changes and damage processes using state-of-the-art electron microscopy techniques, with the aim of establishing the most effective nondestructive materials evaluation technique for particular degradation modes in high-temperature alloys that are candidates for use in the Next Generation Nuclear Plant (NGNP) as well as providing the necessary mechanism-based underpinnings for relating the two. Only techniques suitable for practical application in situ will be considered. As the project evolves and results accumulate, we will also study the use of this technique for monitoring other GEN IV

  6. Confirmatory factor analysis of the WAIS-IV/WMS-IV.

    PubMed

    Holdnack, James A; Xiaobin Zhou; Larrabee, Glenn J; Millis, Scott R; Salthouse, Timothy A

    2011-06-01

    The Wechsler Adult Intelligence Scale-fourth edition (WAIS-IV) and the Wechsler Memory Scale-fourth edition (WMS-IV) were co-developed to be used individually or as a combined battery of tests. The independent factor structure of each of the tests has been identified; however, the combined factor structure has yet to be determined. Confirmatory factor analysis was applied to the WAIS-IV/WMS-IV Adult battery (i.e., age 16-69 years) co-norming sample (n = 900) to test 13 measurement models. The results indicated that two models fit the data equally well. One model is a seven-factor solution without a hierarchical general ability factor: Verbal Comprehension, Perceptual Reasoning, Processing Speed, Auditory Working Memory, Visual Working Memory, Auditory Memory, and Visual Memory. The second model is a five-factor model composed of Verbal Comprehension, Perceptual Reasoning, Processing Speed, Working Memory, and Memory with a hierarchical general ability factor. Interpretative implications for each model are discussed.

  7. Life cycle of Schizochytriodinium calani nov. gen. nov. spec., a dinoflagellate parasitizing copepod eggs

    NASA Astrophysics Data System (ADS)

    Elbrächter, Malte

    1988-09-01

    During the Polarstern-cruise ARK IV/2 June 1987, in the Fram Strait, dinophytes parasitizing copepod eggs were observed. In the laboratory on board, vegetative reproduction was documented and re-infection of Calanus glacialis and C. hyperboreus eggs was experimentally established. During food uptake, a primary cyst produces successively several secondary cysts, all separating immediately after formation from the primary cyst. In every one of these free floating secondary cysts up to 256 dinospores are formed by palintomy. Re-infection only occurred after a “maturation time” of at least 2 days after formation of the dinospores. The life cycle is compared to that of other similar parasitic dinophyte genera: Apodinium Chatton, Chytriodinium Chatton, Dissodinium Klebs in Pascher and Myxodinium Cachon, Cachon & Bouquaheux. As the taxon under discussion does not fit in with any species or genus known so far, it is described as Schizochytriodinium calani nov. gen. nov. spec.

  8. NextGen Future Safety Assessment Game

    NASA Technical Reports Server (NTRS)

    Ancel, Ersin; Gheorghe, Adian; Jones, Sharon Monica

    2010-01-01

    The successful implementation of the next generation infrastructure systems requires solid understanding of their technical, social, political and economic aspects along with their interactions. The lack of historical data that relate to the long-term planning of complex systems introduces unique challenges for decision makers and involved stakeholders which in turn result in unsustainable systems. Also, the need to understand the infrastructure at the societal level and capture the interaction between multiple stakeholders becomes important. This paper proposes a methodology in order to develop a holistic approach aiming to provide an alternative subject-matter expert (SME) elicitation and data collection method for future sociotechnical systems. The methodology is adapted to Next Generation Air Transportation System (NextGen) decision making environment in order to demonstrate the benefits of this holistic approach.

  9. NextGen Future Safety Assessment Game

    NASA Technical Reports Server (NTRS)

    Ancel, Ersin; Gheorghe, Adrian; Jones, Sharon Monica

    2011-01-01

    The successful implementation of the next generation infrastructure systems requires solid understanding of their technical, social, political and economic aspects along with their interactions. The lack of historical data that relate to the long-term planning of complex systems introduces unique challenges for decision makers and involved stakeholders which in turn result in unsustainable systems. Also, the need to understand the infrastructure at the societal level and capture the interaction between multiple stakeholders becomes important. This paper proposes a methodology in order to develop a holistic approach aiming to provide an alternative subject-matter expert (SME) elicitation and data collection method for future sociotechnical systems. The methodology is adapted to Next Generation Air Transportation System (NextGen) decision making environment in order to demonstrate the benefits of this holistic approach.

  10. Generation IV Nuclear Energy Systems Construction Cost Reductions through the Use of Virtual Environments - Final Report

    SciTech Connect

    Timothy Shaw; Anthony Baratta; Vaughn Whisker

    2005-02-28

    Final report of 3 year DOE NERI-sponsored effort evaluating immersive virtual reality (CAVE) technology for design review, construction planning, and maintenance planning and training for next generation nuclear power plants. Program covers development of full-scale virtual mockups generated from 3D CAD data presented in a CAVE visualization facility. Mockups applied to design review of AP600/1000, Construction planning for AP 600, and AP 1000 maintenance evaluation. Proof of concept study also performed for GenIV PBMR models.

  11. BJN Awards 2016: IV therapy.

    PubMed

    Rickard, Claire

    2016-07-28

    Claire Rickard Professor of Nursing, National Health and Medical Research Council (NHMRC) Centre of Research Excellence in Nursing, Griffith University, was awarded second place in the BJN Awards 2016 for IV Therapy Nurse of the Year. Here she talks about the she has done to be recognised in this field. PMID:27467655

  12. Phase IV of Drug Development.

    PubMed

    Suvarna, Viraj

    2010-04-01

    Not all Phase IV studies are post-marketing surveillance (PMS) studies but every PMS study is a phase IV study. Phase IV is also an important phase of drug development. In particular, the real world effectiveness of a drug as evaluated in an observational, non-interventional trial in a naturalistic setting which complements the efficacy data that emanates from a pre-marketing randomized controlled trial (RCT). No matter how many patients are studied pre-marketing in a controlled environment, the true safety profile of a drug is characterized only by continuing safety surveillance through a spontaneous adverse event monitoring system and a post-marketing surveillance/non-interventional study. Prevalent practice patterns can generate leads that could result in further evaluation of a new indication via the RCT route or even a signal that may necessitate regulatory action (change in labeling, risk management/minimization action plan). Disease registries are another option as are the large simple hybrid trials. Surveillance of spontaneously reported adverse events continues as long as a product is marketed. And so Phase IV in that sense never ends.

  13. The PLATO IV Communications System.

    ERIC Educational Resources Information Center

    Sherwood, Bruce Arne; Stifle, Jack

    The PLATO IV computer-based educational system contains its own communications hardware and software for operating plasma-panel graphics terminals. Key echoing is performed by the central processing unit: every key pressed at a terminal passes through the entire system before anything appears on the terminal's screen. Each terminal is guaranteed…

  14. The PLATO IV Student Terminal.

    ERIC Educational Resources Information Center

    Stifle, Jack

    This report describes the remote computer terminal designed for student use in the PLATO IV computer-assisted instruction system. The terminal features a plasma display panel, self-contained character and line generators, and the ability to communicate over voice grade telephone circuits. Operating modes and control characters are described in…

  15. Head-Worn Displays for NextGen

    NASA Technical Reports Server (NTRS)

    Bailey, Randall E.; Shelton, Kevin J.; Arthur, J. J.

    2011-01-01

    The operating concepts emerging under the Next Generation air transportation system (NextGen) require new technology and procedures - not only on the ground-side - but also on the flight deck. Flight deck display and decision support technologies are specifically targeted to overcome aircraft safety barriers that might otherwise constrain the full realization of NextGen. One such technology is the very lightweight, unobtrusive head-worn display (HWD). HWDs with an integrated head-tracking system are being researched as they offer significant potential benefit under emerging NextGen operational concepts. Two areas of benefit for NextGen are defined. First, the HWD may be designed to be equivalent to the Head-Up Display (HUD) using Virtual HUD concepts. As such, these operational credits may be provided to significantly more aircraft for which HUD installation is neither practical nor possible. Second, the HWD provides unique display capabilities, such as an unlimited field-of-regard. These capabilities may be integral to emerging NextGen operational concepts, eliminating safety issues which might otherwise constrain the full realization of NextGen. The paper details recent research results, current HWD technology limitations, and future technology development needed to realize HWDs as a enabling technology for NextGen.

  16. RxGen General Optical Model Prescription Generator

    NASA Technical Reports Server (NTRS)

    Sigrist, Norbert

    2012-01-01

    RxGen is a prescription generator for JPL's in-house optical modeling software package called MACOS (Modeling and Analysis for Controlled Optical Systems), which is an expert optical analysis software package focusing on modeling optics on dynamic structures, deformable optics, and controlled optics. The objectives of RxGen are to simplify and automate MACOS prescription generations, reducing errors associated with creating such optical prescriptions, and improving user efficiency without requiring MACOS proficiency. RxGen uses MATLAB (a high-level language and interactive environment developed by MathWorks) as the development and deployment platform, but RxGen can easily be ported to another optical modeling/analysis platform. Running RxGen within the modeling environment has the huge benefit that variations in optical models can be made an integral part of the modeling state. For instance, optical prescription parameters determined as external functional dependencies, optical variations by controlling the in-/exclusion of optical components like sub-systems, and/or controlling the state of all components. Combining the mentioned capabilities and flexibilities with RxGen's optical abstraction layer completely eliminates the hindering aspects for requiring proficiency in writing/editing MACOS prescriptions, allowing users to focus on the modeling aspects of optical systems, i.e., increasing productivity and efficiency. RxGen provides significant enhancements to MACOS and delivers a framework for fast prototyping as well as for developing very complex controlled optical systems.

  17. Christian Ethics. A Teacher Information Bulletin for Division IV.

    ERIC Educational Resources Information Center

    Saskatchewan Dept. of Education, Regina.

    Listed are print and audiovisual materials that support the "Curriculum Guide for Division IV: Christian Ethics" intended for use in grades 10, 11, and 12. The course is designed to help students articulate, reflect upon, and understand what they believe and practice. Cited in this resource manual are textbooks, teacher's guides, supplementary…

  18. Gene expression profiling of RNA extracted from FFPE tissues: NuGEN technologies' whole-transcriptome amplification system.

    PubMed

    Turner, Leah; Heath, Joe Don; Kurn, Nurith

    2011-01-01

    Gene expression profiling of RNA isolated from formalin fixed, paraffin-embedded (FFPE) tissue samples has been historically challenging. Yet FFPE samples are sought-after because of the in-depth retrospective records typically associated with them rendering these samples a valuable resource for translational medicine studies. Extensive degradation, chemical modifications, and cross-linking have made it difficult to isolate RNA of sufficient quality required for large-scale gene expression profiling studies. NuGEN Technologies' WT-Ovation™ FFPE System linearly amplifies RNA from FFPE samples through a robust and simple whole-transcriptome approach using as little as 50 ng total RNA isolated from FFPE samples. The amplified material may be labeled with validated kits and/or protocols from NuGEN for analysis on any of the major gene expression microarray platforms, including: Affymetrix, Agilent, and Illumina gene expression arrays. Results compare well with those obtained using RNA from fresh-frozen samples. RNA quality from FFPE samples varies significantly and neither sample age nor sample size analysis via gel electrophoresis or the Agilent Bioanalyzer system accurately predict materials suitable for amplification. Therefore, NuGEN has validated a correlative qPCR-based analytical method for the RNA derived from FFPE samples which effectively predicts array results. The NuGEN approach enables fast and successful analysis of samples previously thought to be too degraded for gene expression analysis.

  19. Problems associated with the use of urea-formaldehyde foam for residential insulation. Part IV. Relevance of materials standards to problems associated with the use of urea-formaldehyde foam insulation

    SciTech Connect

    Long, K.R.; Schutte, W.C.

    1981-02-01

    The insulation industry is essentially self-regulated; therefore, the question arises as to whether or not increased public regulation would be effective in controlling problems associated with the use of urea-formaldehyde foam as residential insulation. The relevancy of public regulation to controlling problems such as off-gassing of formaldehyde associated with the use of the products through the introduction of materials standards and quality assurance of manufacture and installation is discussed. The use of urea-formaldehyde insulation may be divided into three phases-manufacture, installation, and behavioral phases. The relevance of materials standards and quality assurance for each phase is discussed.

  20. Taxonomy of the Proisotoma complex. V. Sexually dimorphic Ephemerotoma gen. nov. (Collembola: Isotomidae).

    PubMed

    Potapov, Mikhail; Kahrarian, Morteza; Deharveng, Louis; Shayanmehr, Masoumeh

    2015-01-01

    A new genus is proposed based on a new species from Iran, Ephemerotoma skarzynskii gen. et sp. nov., and three known species: E. huadongensis (Chen, 1985) comb. nov., E. multituberculata (Martynova, 1971) comb. nov. and E. porcella (Ellis, 1976) comb. nov. The genus shares the characters of Subisotoma Stach and Proctostephanus Börner and is distributed in southern areas of Eurasia (Eastern Mediterranean, Iran, Tajikistan, China). Ephemerotoma gen. nov. belongs to the Proisotoma-complex and is characterized by a simple maxillary palp, only 4 guards on labial papilla E and 2 prelabral chaetae. Four s-chaetae on Abd.V are arranged in two rows, two anterior and two posterior chaetae. All members of Ephemerotoma gen. nov. are redescribed or discussed based on type or fresh material, and a key to species of the genus is given. Scutisotoma potapovi Xie & Chen, 2008 is considered a synonym of E. huadongensis, while Proisotoma anopolitana is moved to the genus Proctostephanus. Sexual dimorphism is described for three species. PMID:26701434

  1. GenR, an IclR-type regulator, activates and represses the transcription of gen genes involved in 3-hydroxybenzoate and gentisate catabolism in Corynebacterium glutamicum.

    PubMed

    Chao, Hongjun; Zhou, Ning-Yi

    2013-04-01

    The genes required for 3-hydroxybenzoate and gentisate catabolism in Corynebacterium glutamicum are closely clustered in three operons. GenR, an IclR-type regulator, can activate the transcription of genKH and genDFM operons in response to 3-hydroxybenzoate and gentisate, and it can repress its own expression. Footprinting analyses demonstrated that GenR bound to four sites with different affinities. Two GenR-binding sites (DFMn01 and DFMn02) were found to be located between positions --41 and --84 upstream of the --35 and --10 regions of the genDFM promoter, which was involved in positive regulation of genDFM transcription. The GenR binding site R-KHn01 (located between positions --47 and --16) overlapped the --35 region of the genKH promoter sequence and is involved in positive regulation of its transcription. The binding site R-KHn02, at which GenR binds to its own promoter, was found within a footprint extending from position --44 to --67. It appeared to be involved in negative regulation of the activity of the genR promoter. A consensus motif with a 5-bp imperfect palindromic sequence [ATTCC-N(7(5))-GGAAT] was identified among all four GenR binding sites and found to be necessary to GenR regulation through site-directed mutagenesis. The results reveal a new regulatory function of the IclR family in the catabolism of aromatic compounds.

  2. 1. GENERAL VIEW. Statues: Maj. Gen George Meade by Daniel ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. GENERAL VIEW. Statues: Maj. Gen George Meade by Daniel Chester French, south side; Maj. Gen. John Reynolds by Charles Grafly, north side. Equestrian Statues: Maj. Gen George B. McClellan by Edward C. Potter, south side; Maj. Gen Winfield S. Hancock by J.Q.A. Ward, north side. The statue at the base of northern inner pedestal is Richard Smith, a type founder and donor of the Memorial. The niches are filled with eight colossal busts including Union generals, admirals, Pennsylvania governor, Memorial's architects (John T. and James H. Windrim), and executor of Smith's will. The frieze is carved with the names of eighty-four prominent Pennsylvania participants in the Civil War. - Smith Memorial Arch, Philadelphia, Philadelphia County, PA

  3. EPCGen2 Pseudorandom Number Generators: Analysis of J3Gen

    PubMed Central

    Peinado, Alberto; Munilla, Jorge; Fúster-Sabater, Amparo

    2014-01-01

    This paper analyzes the cryptographic security of J3Gen, a promising pseudo random number generator for low-cost passive Radio Frequency Identification (RFID) tags. Although J3Gen has been shown to fulfill the randomness criteria set by the EPCglobal Gen2 standard and is intended for security applications, we describe here two cryptanalytic attacks that question its security claims: (i) a probabilistic attack based on solving linear equation systems; and (ii) a deterministic attack based on the decimation of the output sequence. Numerical results, supported by simulations, show that for the specific recommended values of the configurable parameters, a low number of intercepted output bits are enough to break J3Gen. We then make some recommendations that address these issues. PMID:24721767

  4. EPCGen2 pseudorandom number generators: analysis of J3Gen.

    PubMed

    Peinado, Alberto; Munilla, Jorge; Fúster-Sabater, Amparo

    2014-01-01

    This paper analyzes the cryptographic security of J3Gen, a promising pseudo random number generator for low-cost passive Radio Frequency Identification (RFID) tags. Although J3Gen has been shown to fulfill the randomness criteria set by the EPCglobal Gen2 standard and is intended for security applications, we describe here two cryptanalytic attacks that question its security claims: (i) a probabilistic attack based on solving linear equation systems; and (ii) a deterministic attack based on the decimation of the output sequence. Numerical results, supported by simulations, show that for the specific recommended values of the configurable parameters, a low number of intercepted output bits are enough to break J3Gen. We then make some recommendations that address these issues. PMID:24721767

  5. 98. SWITCH HOUSE MAIN LOBBY, GEN 3 CIRCUIT BREAKER, VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    98. SWITCH HOUSE MAIN LOBBY, GEN 3 CIRCUIT BREAKER, VIEW OF OPPOSITE SIDE FROM HAER No. PA-505-97 - Delaware County Electric Company, Chester Station, Delaware River at South end of Ward Street, Chester, Delaware County, PA

  6. Uranium(IV) Complexation by Natural Organic Matter Controls Speciation in the Subsurface

    NASA Astrophysics Data System (ADS)

    Bone, S.; Dynes, J.; Fendorf, S. E.; Jones, M. E.; Bargar, J.

    2014-12-01

    Uranium contaminates groundwater at many sites throughout the United States. At the aquifer in Rifle, CO, U(IV) has been found to accumulate in natural organic matter (NOM)-rich sediments comprising buried alluvial material. We expect that NOM, which is composed of detrital plant material and microbial biomass and necromass, profoundly influences the speciation of U(IV). Specifically, we hypothesize that NOM forms stable complexes with U(IV) (i.e., "noncrystalline" U(IV)), particularly through organic phosphorus moieties associated with bacteria and exopolymeric substances (EPS). Complexation with NOM can help to explain why noncrystalline U(IV) is more abundant in the subsurface than the mineral uraninite (UO2). The abundance and relative reactivity of non-crystalline U(IV) suggests that it drives U fate and transport in the subsurface. W are examining the reduction of U(VI) and subsequent complexation of U(IV) in model NOM systems comprising homogenized, partially degraded plant material, which is analogous to the detrital plant material abundant in Rifle sediments, and its associated microbial consortia. We employ a suite of spectroscopic (X-ray absorption spectroscopies) and microscopic (scanning transmission X-ray microscopy, scanning electron microscopy, and nano-scale secondary ion mass spectrometry) tools that allow us to identify the number and types of coordinating ligands and the distribution of U with respect to NOM components, including bacterial cells, plant matter and entrained minerals. In preliminary experiments we found that 50 - 100 % of U(VI) was reduced to U(IV) within several days. Furthermore, NOM was observed to sorb both U(VI), as a carbonyl complex, and U(IV), possibly as a phosphoryl complex. Further microscopic analyses are designed to elucidate whether U(IV)-P complexes are associated with bacteria or EPS. Our research suggests a new, more complicated model for U(IV) speciation in subsurface sediments, in which complexation by NOM, as

  7. Biosynthesis of alpha2(IV) and alpha1(IV) chains of collagen IV and interactions with matrix metalloproteinase-9.

    PubMed

    Toth, M; Sado, Y; Ninomiya, Y; Fridman, R

    1999-07-01

    In vitro binding studies with latent matrix metalloproteinase-9 (pro-MMP-9) have revealed the existence of nondisulfide-bonded alpha2(IV) chains on the cell surface capable of forming a high-affinity complex with the enzyme. Here we investigated the biosynthesis and cellular distribution of alpha2(IV) and alpha1(IV) chains in breast epithelial (MCF10A and MDA-MB-231) and fibrosarcoma (HT1080) cells by pulse-chase analysis followed by immunoprecipitation with chain-specific monoclonal antibodies (mAb). These studies showed that whereas the alpha1(IV) chain remained in the intracellular compartment, nondisulfide-bonded alpha2(IV) chains were secreted into the media in a stable form. Consistently, only alpha2(IV) was detected on the cell surface by surface biotinylation or indirect immunofluorescence. In agreement with the pulse-chase analysis, media subjected to co-precipitation experiments with pro-MMP-9 or pro-MMP-9-affinity chromatography followed by immunoblotting with chain-specific mAbs resulted in the detection of alpha2(IV). A preferential secretion of nondisulfide-bonded alpha2(IV) chains was also observed in CHO-K1 cells transiently transfected with full-length mouse alpha2(IV) or alpha (IV) cDNAs. However, a complex of mouse alpha1(IV) with pro-MMP-9 was coprecipitated with exogenous enzyme from lysates of CHO-K1 cells transfected with mouse alpha1(IV), suggesting that under overexpression conditions the enzyme can also interact with the alpha1 (IV) chain. Collectively, these studies further demonstrate the interactions of pro-MMP-9 with collagen IV chains and a unique processing and targeting of nondisulfide-bonded alpha2(IV) chains that may play a role in the surface/matrix association of pro-MMP-9.

  8. A new tardigrade, Mutaparadoxipus duodigifinis gen. nov., sp. nov. (Heterotardigrada: Arthrotardigrada), from the Southeastern United States.

    PubMed

    Gross, Vladimir; Miller, William R; Hochberg, Rick

    2014-07-10

    A new genus and species of Arthrotardigrada is described from Florida, USA based on its unique adhesive pad/claw combinations. Mutaparadoxipus duodigifinis gen. nov., sp. nov., is characterized by well-developed, ventral secondary clavae that are adjacent to the mouth, pointed lateral and caudal alae, seminal receptacles with coiled ducts opening lateral to the gonopore, and all legs with digits bearing proximal adhesive pads. Distal claws are present on digits I-III of legs I-III, but are missing from digit IV. On leg IV, distal claws are present only on digits II & III. A single accessory point is present on claws II & III only. This is the fourth species discovered to date with proximal adhesive pads, increasing support for a clade of adhesive-padded arthrotardigrades, and is likely the sister taxon of Paradoxipus orzeliscoides. The incomplete set of claws may represent an evolutionary step in a progressive loss of claws hypothesized to have occurred within the Halechiniscidae. The subfamily Orzeliscinae is amended as a result.

  9. A new tardigrade, Mutaparadoxipus duodigifinis gen. nov., sp. nov. (Heterotardigrada: Arthrotardigrada), from the Southeastern United States.

    PubMed

    Gross, Vladimir; Miller, William R; Hochberg, Rick

    2014-01-01

    A new genus and species of Arthrotardigrada is described from Florida, USA based on its unique adhesive pad/claw combinations. Mutaparadoxipus duodigifinis gen. nov., sp. nov., is characterized by well-developed, ventral secondary clavae that are adjacent to the mouth, pointed lateral and caudal alae, seminal receptacles with coiled ducts opening lateral to the gonopore, and all legs with digits bearing proximal adhesive pads. Distal claws are present on digits I-III of legs I-III, but are missing from digit IV. On leg IV, distal claws are present only on digits II & III. A single accessory point is present on claws II & III only. This is the fourth species discovered to date with proximal adhesive pads, increasing support for a clade of adhesive-padded arthrotardigrades, and is likely the sister taxon of Paradoxipus orzeliscoides. The incomplete set of claws may represent an evolutionary step in a progressive loss of claws hypothesized to have occurred within the Halechiniscidae. The subfamily Orzeliscinae is amended as a result. PMID:25081448

  10. Skryjelites auritus gen. et sp. nov. and Quasimolites quasimodo gen. et sp. nov.--two new middle Cambrian hyolithids (?Mollusca) from the Czech Republic.

    PubMed

    Valent, Martin; Fatka, Oldřich; Szabad, Michal; Micka, Václav; Marek, Ladislav

    2015-08-28

    Two new endemic genera and species of extinct group of Hyolitha, Skryjelites auritus gen. et sp. nov. and Quasimolites quasimodo gen. et sp. nov. are described and illustrated from the Buchava Formation of the Barrandian area (Czech Republic).

  11. Test Review: Advanced Clinical Solutions for WAIS-IV and WMS-IV

    ERIC Educational Resources Information Center

    Chu, Yiting; Lai, Mark H. C.; Xu, Yining; Zhou, Yuanyuan

    2012-01-01

    The authors review the "Advanced Clinical Solutions for WAIS-IV and WMS-IV". The "Advanced Clinical Solutions (ACS) for the Wechsler Adult Intelligence Scale-Fourth Edition" (WAIS-IV; Wechsler, 2008) and the "Wechsler Memory Scale-Fourth Edition" (WMS-IV; Wechsler, 2009) was published by Pearson in 2009. It is a clinical tool for extending the…

  12. Stage IV-S neuroblastoma. Results with definitive therapy

    SciTech Connect

    Stokes, S.H.; Thomas, P.R.; Perez, C.A.; Vietti, T.J.

    1984-05-15

    The results of management of 14 patients with Stage IV-S neuroblastoma are reported. The treatment policy, although not consistent over this time span, in general used a combination of radiotherapy and chemotherapy or infrequently one modality alone. Twelve of 14 (86%) survived more than 6 years. One patient, with a solitary mediastinal primary tumor, died of rapidly progressive disease at three months. The other death occurred in a 4.5-year-old presenting with hepatomegaly at diagnosis followed by skeletal dissemination 2.5 years later. Thirteen of the patients were younger than 1 year of age. Of the 11 patients that received radiotherapy, 4 experienced mild asymptomatic scoliosis or kyphoscoliosis at 3 to 12 years after initial therapy. A review of the literature indicates that spontaneous regression in this tumor is very frequent; therefore, it is recommended that for the common presentation of massive hepatomegaly in an infant, close observation is warranted, unless life threatening complications occur. However, initial therapeutic intervention may be indicated in those patients with life threatening presentations. This data did not substantiate the necessity for complete surgical excision of the primary tumor, as has been suggested by others.

  13. SEQ-GEN: A comprehensive multimission sequencing system

    NASA Technical Reports Server (NTRS)

    Salcedo, Jose; Starbird, Thomas J.

    1994-01-01

    SEQ-GEN is a user-interactive computer program used to plan and generate a sequence of commands for spacecraft. Desired activities are specified by the user of SEQ-GEN; SEQ-GEN in turn expands these activities, deriving the spacecraft commands necessary to accomplish the desired activities. SEQ-GEN models the effects on the spacecraft of the commands, predicting the state as a function of time, flagging any conflicts and rule violations. These states, conflicts, and violations are viewable both graphically and textually at the user's request. SEQ-GEN also displays the entire sequence graphically, showing each requested activity as a bar on its graphical timeline. SEQ-GEN immediately revalidates the sequence, updating its models and calculations along with its displays based on these changes. Because it has the ability to recalculate spacecraft states immediately, the user is able to perform 'what-if' sessions easily. SEQ-GEN, a multimission tool, is adaptable to any flight project. A flight project writes its adaptation files containing project unique information including in its simplest form, only spacecraft commands. For more involved projects the adaptation files may also contain flight and mission rules, description of the spacecraft and ground models, and the definition of activities. SEQ-GEN operates at whatever level of detail the adaptation files imply. Simple adaptations are straight forward to do. There is, however, no limit to the complexity of activity definitions or of spacecraft models: both may involve unlimited logical decision points. Commands and activities may involve any number of parameters of a wide variety of data types, including integer, float, time, boolean, and character strings. SEQ-GEN will be used by the Mars Pathfinder, Cassini, and VIM (Voyager Interstellar Mission) project in an effort to speed up adaptation time and to keep sequence generation costs down. SEQ-GEN is hosted on UNIX workstations. It uses MOTIF and X for windowing

  14. Benzen and Ethylene Binding to Copper(I)-Ziconium(IV) Chloride Materials: The Crystal Structure and Solid-State Reactivity of ((bz)2Cu)2Zr2Cl10.bz

    SciTech Connect

    Dattelbaum,A.; Martin, J.

    2006-01-01

    The solvothermal reaction of Cu{sub 2}ZrCl{sub 6} and ZrCl{sub 4} in benzene is shown to yield the molecular species ((bz){sub 2}Cu){sub 2}Zr{sub 2}Cl{sub 10} {center_dot} bz(1), which is characterized by single crystal X-ray diffraction. The structure consists of edge-shared dimers of zirconium chloride octahedra whose axial chlorides are bridged by bis-benzene chlorocuprate fragments. The Cu{sub 2}Zr{sub 2} tetramers are linked in the crystal lattice by edge-to-face {pi}-stacking of the coordinated and lattice benzene molecules, as well as benzene-to-chloride hydrogen bonding. Benzene is lost from this material in a stepwise fashion resulting in what are described to be chain, ((bz)Cu){sub 2}Zr{sub 2}Cl{sub 10} (3). The desolvated materials, 2 and 3, reversibly sorb ethylene, as characterized by sorption isotherms, in situ pressure-resolved synchrotron X-ray diffraction and UV/Vis diffuse reflectance spectroscopy.

  15. Nuclear Data Needs for Generation IV Nuclear Energy Systems

    NASA Astrophysics Data System (ADS)

    Rullhusen, Peter

    2006-04-01

    Nuclear data needs for generation IV systems. Future of nuclear energy and the role of nuclear data / P. Finck. Nuclear data needs for generation IV nuclear energy systems-summary of U.S. workshop / T. A. Taiwo, H. S. Khalil. Nuclear data needs for the assessment of gen. IV systems / G. Rimpault. Nuclear data needs for generation IV-lessons from benchmarks / S. C. van der Marck, A. Hogenbirk, M. C. Duijvestijn. Core design issues of the supercritical water fast reactor / M. Mori ... [et al.]. GFR core neutronics studies at CEA / J. C. Bosq ... [et al]. Comparative study on different phonon frequency spectra of graphite in GCR / Young-Sik Cho ... [et al.]. Innovative fuel types for minor actinides transmutation / D. Haas, A. Fernandez, J. Somers. The importance of nuclear data in modeling and designing generation IV fast reactors / K. D. Weaver. The GIF and Mexico-"everything is possible" / C. Arrenondo Sánchez -- Benmarks, sensitivity calculations, uncertainties. Sensitivity of advanced reactor and fuel cycle performance parameters to nuclear data uncertainties / G. Aliberti ... [et al.]. Sensitivity and uncertainty study for thermal molten salt reactors / A. Biduad ... [et al.]. Integral reactor physics benchmarks- The International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPHEP) / J. B. Briggs, D. W. Nigg, E. Sartori. Computer model of an error propagation through micro-campaign of fast neutron gas cooled nuclear reactor / E. Ivanov. Combining differential and integral experiments on [symbol] for reducing uncertainties in nuclear data applications / T. Kawano ... [et al.]. Sensitivity of activation cross sections of the Hafnium, Tanatalum and Tungsten stable isotopes to nuclear reaction mechanisms / V. Avrigeanu ... [et al.]. Generating covariance data with nuclear models / A. J. Koning. Sensitivity of Candu-SCWR reactors physics calculations to nuclear data files / K. S

  16. PREPARATION OF OXOPORPHINATOMANGANESE (IV) COMPLEX

    SciTech Connect

    Willner, I.; Otvos, J.; Calvin, M.

    1980-07-01

    Oxo-manganese-tetraphenylporphyrin (O=Mn{sup IV}-TPP) has been prepared by an oxygen-transfer reaction from iodosylbenzene to MnIITPP and characterized by its i.r. and field desorption mass spectra, which are identical to those of the product obtained by direct oxidation of Mn{sup III}(TPP) in an aqueous medium; it transfers oxygen to triphenylphosphine to produce triphenylphosphine oxide, and it is suggested that similar intermediates are important in oxygen activation by cytochrome P-450 as well as in the photosynthetic evolution of oxygen.

  17. The dependence of C IV broad absorption line properties on accompanying Si IV and Al III absorption: relating quasar-wind ionization levels, kinematics, and column densities

    SciTech Connect

    Filiz Ak, N.; Brandt, W. N.; Schneider, D. P.; Trump, J. R.; Hall, P. B.; Anderson, S. F.; Hamann, F.; Myers, Adam D.; Pâris, I.; Petitjean, P.; Ross, Nicholas P.; Shen, Yue; York, Don

    2014-08-20

    We consider how the profile and multi-year variability properties of a large sample of C IV Broad Absorption Line (BAL) troughs change when BALs from Si IV and/or Al III are present at corresponding velocities, indicating that the line of sight intercepts at least some lower ionization gas. We derive a number of observational results for C IV BALs separated according to the presence or absence of accompanying lower ionization transitions, including measurements of composite profile shapes, equivalent width (EW), characteristic velocities, composite variation profiles, and EW variability. We also measure the correlations between EW and fractional-EW variability for C IV, Si IV, and Al III. Our measurements reveal the basic correlated changes between ionization level, kinematics, and column density expected in accretion-disk wind models; e.g., lines of sight including lower ionization material generally show deeper and broader C IV troughs that have smaller minimum velocities and that are less variable. Many C IV BALs with no accompanying Si IV or Al III BALs may have only mild or no saturation.

  18. Taming Tin(IV) Polyazides.

    PubMed

    Campbell, Rory; Davis, Martin F; Fazakerley, Mathew; Portius, Peter

    2015-12-14

    The first charge-neutral Lewis base adducts of tin(IV) tetraazide, [Sn(N3)4(bpy)], [Sn(N3)4(phen)] and [Sn(N3)4(py)2], and the salt bis{bis(triphenylphosphine)iminium} hexa(azido)stannate [(PPN)2Sn(N3)6] (bpy = 2,2'-bipyridine; phen = 1,10-phenanthroline; py = pyridine; PPN = N(PPh3)2) have been prepared using covalent or ionic azide-transfer reagents and ligand-exchange reactions. The azides were isolated on the 0.3 to 1 g scale and characterized by IR and NMR spectroscopies, microanalytical and thermal methods and their molecular structures determined by single-crystal XRD. All complexes have a distorted octahedral Sn[N]6 coordination geometry and possess greater thermal stability than their Si and Ge homologues. The nitrogen content of the adducts of up to 44% exceed any Sn(IV) compound known hitherto. PMID:26767331

  19. Two New Freshwater Woloszynskioids Asulcocephalium miricentonis gen. et sp. nov. and Leiocephalium pseudosanguineum gen. et sp. nov. (Suessiaceae, Dinophyceae) Lacking an Apical Furrow Apparatus.

    PubMed

    Takahashi, Kazuya; Moestrup, Øjvind; Jordan, Richard W; Iwataki, Mitsunori

    2015-12-01

    Two new woloszynskioid dinoflagellates, Asulcocephalium miricentonis gen. et sp. nov. and Leiocephalium pseudosanguineum gen. et sp. nov., are described from Japanese freshwater ponds on the basis of bright field and fluorescence light microscopy, scanning and transmission electron microscopy, and molecular phylogeny inferred from rDNA sequences. Asulcocephalium miricentonis has a spherical anterior nucleus and chloroplast with a pyrenoid penetrated by the cytoplasm. This species has 9-12 latitudinal series of amphiesmal vesicles (AVs), including an apparently large AV on the right ventral side of the epicone. Leiocephalium pseudosanguineum has a U-shaped nucleus in the epicone and chloroplasts without a pyrenoid. This species has at least 24 latitudinal series of AVs. The characteristic features of both species were brick-like material (type E) in the eyespot and the lack of an apical furrow. These features coincide with those of Polarella glacialis, but the two species differ in cell shape, number and arrangement of AVs, shape of resting cysts, and habitats; i.e., P. glacialis has been reported only from marine cold waters. Molecular phylogeny revealed that A. miricentonis and L. pseudosanguineum were positioned in the Suessiaceae and closely related to Piscinoodinium sp., but their relationship to Polarella and other reported taxa was not supported.

  20. Two New Freshwater Woloszynskioids Asulcocephalium miricentonis gen. et sp. nov. and Leiocephalium pseudosanguineum gen. et sp. nov. (Suessiaceae, Dinophyceae) Lacking an Apical Furrow Apparatus.

    PubMed

    Takahashi, Kazuya; Moestrup, Øjvind; Jordan, Richard W; Iwataki, Mitsunori

    2015-12-01

    Two new woloszynskioid dinoflagellates, Asulcocephalium miricentonis gen. et sp. nov. and Leiocephalium pseudosanguineum gen. et sp. nov., are described from Japanese freshwater ponds on the basis of bright field and fluorescence light microscopy, scanning and transmission electron microscopy, and molecular phylogeny inferred from rDNA sequences. Asulcocephalium miricentonis has a spherical anterior nucleus and chloroplast with a pyrenoid penetrated by the cytoplasm. This species has 9-12 latitudinal series of amphiesmal vesicles (AVs), including an apparently large AV on the right ventral side of the epicone. Leiocephalium pseudosanguineum has a U-shaped nucleus in the epicone and chloroplasts without a pyrenoid. This species has at least 24 latitudinal series of AVs. The characteristic features of both species were brick-like material (type E) in the eyespot and the lack of an apical furrow. These features coincide with those of Polarella glacialis, but the two species differ in cell shape, number and arrangement of AVs, shape of resting cysts, and habitats; i.e., P. glacialis has been reported only from marine cold waters. Molecular phylogeny revealed that A. miricentonis and L. pseudosanguineum were positioned in the Suessiaceae and closely related to Piscinoodinium sp., but their relationship to Polarella and other reported taxa was not supported. PMID:26599726

  1. Synthesis and characterization of II-IV-V(2) semiconductors

    NASA Astrophysics Data System (ADS)

    Wen, Yuan-Chung

    1998-11-01

    The II-IV-V2 chalcopyrite semiconductors are isostructural and isoelectronic analogues of the III-V semiconductors. Like the III-V materials the compounds have potential applications in nonlinear optics, optoelectronics and solar energy conversion. The naturally abundant elements and high absorption coefficients in many of the II-IV-V2's make these materials more attractive for large scale applications. Our study focused on the investigation of the basic electrical and optical properties of a number of II-IV- V2 materials by photoelectrochemical methods and photoluminescence. A variety of single crystals in II-IV- V2 family such as ZnSiAs2, CdSiAs2, CdSiP2, ZnSiP2, CdGeP2, ZnGeP2, and ZnSnP2 have been synthesized by chemical vapor transport (CVT) and Bridgman growth techniques. Intentional doping with S, Se, Al, Ga and In of the crystals resulted in complex behavior. In some systems compensation with intrinsic acceptors was observed and in other systems the change of doping type and controllable doping levels were observed. The bandgap, doping level, band position, quantum yield and current voltage behavior in various electrolytes for many of the II-IV-V2 semiconductors have been determined using photoelectrochemical methods. Hall effect measurements of doping density have been used to compare with values obtained from Mott-Schottky analysis. Frequency and pH dependence of the Mott-Schottky plots were observed. The minority diffusion length of II-IV-V2 calculated from quantum yield and absorption coefficient data at the onset of photocurrent matches well to the prediction from the Gartner Model. Polarization dependent photoluminescence has been used for the study of interband transitions and optical anisotropy in CdSiAs2 and CdSiP2 crystals. The electrode surfaces of CdSiAs2 crystals treated by wet chemical etchants were investigated and characterized by XPS. 31P solid state MAS NMR studies of the II-IV- P2 compounds gave very sharp 31P resonances and revealed

  2. PHASE I MATERIALS PROPERTY DATABASE DEVELOPMENT FOR ASME CODES AND STANDARDS

    SciTech Connect

    Ren, Weiju; Lin, Lianshan

    2013-01-01

    To support the ASME Boiler and Pressure Vessel Codes and Standard (BPVC) in modern information era, development of a web-based materials property database is initiated under the supervision of ASME Committee on Materials. To achieve efficiency, the project heavily draws upon experience from development of the Gen IV Materials Handbook and the Nuclear System Materials Handbook. The effort is divided into two phases. Phase I is planned to deliver a materials data file warehouse that offers a depository for various files containing raw data and background information, and Phase II will provide a relational digital database that provides advanced features facilitating digital data processing and management. Population of the database will start with materials property data for nuclear applications and expand to data covering the entire ASME Code and Standards including the piping codes as the database structure is continuously optimized. The ultimate goal of the effort is to establish a sound cyber infrastructure that support ASME Codes and Standards development and maintenance.

  3. IVS contribution to ITRF2014

    NASA Astrophysics Data System (ADS)

    Bachmann, Sabine; Thaller, Daniela; Roggenbuck, Ole; Lösler, Michael; Messerschmitt, Linda

    2016-07-01

    Every few years the International Terrestrial Reference System (ITRS) Center of the International Earth Rotation and Reference Systems Service (IERS) decides to generate a new version of the International Terrestrial Reference Frame (ITRF). For the upcoming ITRF2014 the official contribution of the International VLBI Service for Geodesy and Astrometry (IVS) comprises 5796 combined sessions in SINEX file format from 1979.6 to 2015.0 containing 158 stations, overall. Nine AC contributions were included in the combination process, using five different software packages. Station coordinate time series of the combined solution show an overall repeatability of 3.3 mm for the north, 4.3 mm for the east and 7.5 mm for the height component over all stations. The minimum repeatabilities are 1.5 mm for north, 2.1 mm for east and 2.9 mm for height. One of the important differences between the IVS contribution to the ITRF2014 and the routine IVS combination is the omission of the correction for non-tidal atmospheric pressure loading (NTAL). Comparisons between the amplitudes of the annual signals derived by the VLBI observations and the annual signals from an NTAL model show that for some stations, NTAL has a high impact on station height variation. For other stations, the effect of NTAL is low. Occasionally other loading effects have a higher influence (e.g. continental water storage loading). External comparisons of the scale parameter between the VTRF2014 (a TRF based on combined VLBI solutions), DTRF2008 (DGFI-TUM realization of ITRS) and ITRF2008 revealed a significant difference in the scale. A scale difference of 0.11 ppb (i.e. 0.7 mm on the Earth's surface) has been detected between the VTRF2014 and the DTRF2008, and a scale difference of 0.44 ppb (i.e. 2.8 mm on the Earth's surface) between the VTRF2014 and ITRF2008. Internal comparisons between the EOP of the combined solution and the individual solutions from the AC contributions show a WRMS in X- and Y-Pole between

  4. GenAnneal: Genetically modified Simulated Annealing

    NASA Astrophysics Data System (ADS)

    Tsoulos, Ioannis G.; Lagaris, Isaac E.

    2006-05-01

    A modification of the standard Simulated Annealing (SA) algorithm is presented for finding the global minimum of a continuous multidimensional, multimodal function. We report results of computational experiments with a set of test functions and we compare to methods of similar structure. The accompanying software accepts objective functions coded both in Fortran 77 and C++. Program summaryTitle of program:GenAnneal Catalogue identifier:ADXI_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXI_v1_0 Program available from: CPC Program Library, Queen's University of Belfast, N. Ireland Computer for which the program is designed and others on which it has been tested: The tool is designed to be portable in all systems running the GNU C++ compiler Installation: University of Ioannina, Greece on Linux based machines Programming language used:GNU-C++, GNU-C, GNU Fortran 77 Memory required to execute with typical data: 200 KB No. of bits in a word: 32 No. of processors used: 1 Has the code been vectorized or parallelized?: No No. of bytes in distributed program, including test data, etc.:84 885 No. of lines in distributed program, including test data, etc.:14 896 Distribution format: tar.gz Nature of physical problem: A multitude of problems in science and engineering are often reduced to minimizing a function of many variables. There are instances that a local optimum does not correspond to the desired physical solution and hence the search for a better solution is required. Local optimization techniques are frequently trapped in local minima. Global optimization is hence the appropriate tool. For example, solving a non-linear system of equations via optimization, employing a "least squares" type of objective, one may encounter many local minima that do not correspond to solutions (i.e. they are far from zero). Typical running time: Depending on the objective function. Method of solution: We modified the process of step selection that the traditional Simulated

  5. Optical and Infrared Interferometry IV

    NASA Astrophysics Data System (ADS)

    Rajagopal, Jayadev K.; Creech-Eakman, Michelle J.; Malbet, Fabien

    2014-08-01

    Optical and IR Interferometry IV at the SPIE 2014 symposium in Montreal had a strong and vibrant program. After initial fears about budget cuts and travel-funding constraints, the Program Committee had to work hard to accommodate as many quality submissions as possible. Innovative, creative and visionary work ensured that the field has progressed well, despite the bleak funding climate felt in the US, Europe and elsewhere. Montreal proved an excellent venue for this, the largest of Interferometry conferences and the only one that brings together practitioners from the world over. Let us summarize a few highlights to convey a glimpse of the excitement that is detailed in the rest of these Proceedings.

  6. Training trust in automation within a NextGen environment

    NASA Astrophysics Data System (ADS)

    Higham, Tiana-Lynn M.

    The projected increase in air traffic density has led to the development of NextGen that is expected to revolutionize the way the NAS is currently functioning. For NextGen to be implemented successfully, it is important to understand the humanautomation relationship within a complex system. Controllers will have to rely on automated tools to successfully manage aircraft in their sector. Increasing human trust in automation can lead to an increase in automation acceptance and its proper use. However, we are not aware of any research studies that have attempted to directly train individuals to trust automation. We report on an attempt to train 8 novice air traffic controllers to trust the automated NextGen tools in a radar internship course. Although the results were not statistically significant, the trend in the data suggests that it may be possible to train trust in automation.

  7. Genes and proteins of Escherichia coli (GenProtEc).

    PubMed

    Riley, M; Space, D B

    1996-01-01

    GenProtEc is a database of Escherichia coli genes and their gene products, classified by type of function and physiological role and with citations to the literature for each. Also present are data on sequence similarities among E.coli proteins with PAM values, percent identity of amino acids, length of alignment and percent aligned. The database is available as a PKZip file by ftp from mbl.edu/pub/ecoli.exe. The program runs under MS-DOS on IMB-compatible machines. GenProtEc can also be accessed through the World Wide Web at URL http://mbl.edu/html/ecoli.html. PMID:8594596

  8. Novel, fiber optic, hybrid pressure and temperature sensor designed for high-temperature gen-IV reactor applications

    SciTech Connect

    Palmer, M. E.; Fielder, R. S.; Davis, M. A.

    2006-07-01

    A novel, fiber optic, hybrid pressure-temperature sensor is presented. The sensor is designed for reliable operation up to 1050 C, and is based on the high-temperature fiber optic sensors already demonstrated during previous work. The novelty of the sensors presented here lies in the fact that pressure and temperature are measured simultaneously with a single fiber and a single transducer. This hybrid approach will enable highly accurate active temperature compensation and sensor self-diagnostics not possible with other platforms. Hybrid pressure and temperature sensors were calibrated by varying both pressure and temperature. Implementing active temperature compensation resulted in a ten-fold reduction in the temperature-dependence of the pressure measurement. Sensors were also tested for operability in a relatively high neutron radiation environment up to 6.9x10{sup 17} n/cm{sup 2}. In addition to harsh environment survivability, fiber optic sensors offer a number of intrinsic advantages for nuclear power applications including small size, immunity to electromagnetic interference, self diagnostics / prognostics, and smart sensor capability. Deploying fiber optic sensors on future nuclear power plant designs would provide a substantial improvement in system health monitoring and safety instrumentation. Additional development is needed, however, before these advantages can be realized. This paper will highlight recent demonstrations of fiber optic sensors in environments relevant to emerging nuclear power plants. Successes and lessons learned will be highlighted. (authors)

  9. Ayumiim Ungipaghaatangi, IV (Stories of Long Ago, IV).

    ERIC Educational Resources Information Center

    Kaneshiro, Vera, Ed.

    This reader contains five traditional stories in St. Lawrence Island Yupik, and is intended for use in advanced levels of reading instruction. The book is part of a series of Siberian Yupik reading materials. (AM)

  10. PREFACE: International Symposium on Vacuum Science & Technology and its Application for Accelerators (IVS 2012)

    NASA Astrophysics Data System (ADS)

    Pandit, V. S.; Pal, Gautam

    2012-11-01

    The Indian Vacuum Society (IVS) was established in 1970 to promote vacuum science and technology in academic, industrial and R&D institutions in India. IVS is a member society of the International Union for Vacuum Science, Technique and Applications (IUVSTA). It has organized International and national symposia, short term courses and workshops on different aspects of Vacuum Science and Technology at regular intervals. So far 27 National symposia, 4 International Symposia and 47 courses have been organized at various locations in India. There has been an active participation from R&D establishments, universities and Indian industries during all these events. In view of the current global situation and emerging trends in vacuum technology, the executive committee of the IVS suggested to us that we organize an International Symposium at the Variable Energy Cyclotron Centre, Kolkata from 15-17 February 2012. At the Variable Energy Cyclotron Centre we have a large number of high vacuum systems used in the K130 Cyclotron and K500 Superconducting Cyclotron. Also a large cryogenic system using LHe plant is in operation for cryopanels and a superconducting magnet for K-500 Cyclotron. The main areas covered at the symposium were the production and measurement of vacuums, leak detection, design and development of large vacuum systems, vacuum metallurgy, vacuum materials and the application of high vacuums in cyclotrons, LINACS and other accelerators. This symposium provided an opportunity for interaction between active researchers and technologists and allowed them to review the current situation, report recent experimental results, share the available expertise and consider the future R&D efforts needed in this area. Keeping the industrial significance of vacuum technology in mind, an exhibition of the vacuum related equipment, accessories, products etc by various suppliers and manufactures was organized alongside the symposium. Participation by a large number of exhibitors

  11. GenR, an IclR-Type Regulator, Activates and Represses the Transcription of gen Genes Involved in 3-Hydroxybenzoate and Gentisate Catabolism in Corynebacterium glutamicum

    PubMed Central

    Chao, Hongjun

    2013-01-01

    The genes required for 3-hydroxybenzoate and gentisate catabolism in Corynebacterium glutamicum are closely clustered in three operons. GenR, an IclR-type regulator, can activate the transcription of genKH and genDFM operons in response to 3-hydroxybenzoate and gentisate, and it can repress its own expression. Footprinting analyses demonstrated that GenR bound to four sites with different affinities. Two GenR-binding sites (DFMn01 and DFMn02) were found to be located between positions −41 and −84 upstream of the −35 and −10 regions of the genDFM promoter, which was involved in positive regulation of genDFM transcription. The GenR binding site R-KHn01 (located between positions −47 and −16) overlapped the −35 region of the genKH promoter sequence and is involved in positive regulation of its transcription. The binding site R-KHn02, at which GenR binds to its own promoter, was found within a footprint extending from position −44 to −67. It appeared to be involved in negative regulation of the activity of the genR promoter. A consensus motif with a 5-bp imperfect palindromic sequence [ATTCC-N7(5)-GGAAT] was identified among all four GenR binding sites and found to be necessary to GenR regulation through site-directed mutagenesis. The results reveal a new regulatory function of the IclR family in the catabolism of aromatic compounds. PMID:23354754

  12. Irradiation-Accelerated Corrosion of Reactor Core Materials. Final Report

    SciTech Connect

    Jiao, Zhujie; Was, Gary; Bartels, David

    2015-04-02

    This project aims to understand how radiation accelerates corrosion of reactor core materials. The combination of high temperature, chemically aggressive coolants, a high radiation flux and mechanical stress poses a major challenge for the life extension of current light water reactors, as well as the success of most all GenIV concepts. Of these four drivers, the combination of radiation and corrosion places the most severe demands on materials, for which an understanding of the fundamental science is simply absent. Only a few experiments have been conducted to understand how corrosion occurs under irradiation, yet the limited data indicates that the effect is large; irradiation causes order of magnitude increases in corrosion rates. Without a firm understanding of the mechanisms by which radiation and corrosion interact in film formation, growth, breakdown and repair, the extension of the current LWR fleet beyond 60 years and the success of advanced nuclear energy systems are questionable. The proposed work will address the process of irradiation-accelerated corrosion that is important to all current and advanced reactor designs, but remains very poorly understood. An improved understanding of the role of irradiation in the corrosion process will provide the community with the tools to develop predictive models for in-reactor corrosion, and to address specific, important forms of corrosion such as irradiation assisted stress corrosion cracking.

  13. 77 FR 54648 - Seventh Meeting: RTCA NextGen Advisory Committee (NAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-05

    ... Federal Aviation Administration Seventh Meeting: RTCA NextGen Advisory Committee (NAC) AGENCY: Federal...Gen Advisory Committee (NAC). SUMMARY: The FAA is issuing this notice to advise the public of the seventh meeting of the RTCA NextGen Advisory Committee (NAC). DATES: The meeting will be held October...

  14. 78 FR 5860 - Eighth Meeting: RTCA Next Gen Advisory Committee (NAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-28

    ... Federal Aviation Administration Eighth Meeting: RTCA Next Gen Advisory Committee (NAC) AGENCY: Federal Aviation Administration (FAA), U.S. Department of Transportation (DOT). ACTION: Notice of RTCA NextGen... meeting of the RTCA NextGen Advisory Committee (NAC). DATES: The meeting will be held February 7,...

  15. 76 FR 22162 - Third Meeting RTCA NextGen Advisory Committee (NAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-20

    ... Federal Aviation Administration Third Meeting RTCA NextGen Advisory Committee (NAC) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: RTCA NextGen Advisory Committee (NAC). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA NextGen Advisory Committee (NAC). DATES:...

  16. 76 FR 54526 - Fourth Meeting RTCA NextGen Advisory Committee (NAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-01

    ... Federal Aviation Administration Fourth Meeting RTCA NextGen Advisory Committee (NAC) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: RTCA NextGen Advisory Committee (NAC). SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA NextGen Advisory Committee (NAC). DATES:...

  17. 78 FR 28940 - Ninth Meeting: RTCA Next Gen Advisory Committee (NAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-16

    ... Federal Aviation Administration Ninth Meeting: RTCA Next Gen Advisory Committee (NAC) AGENCY: Federal Aviation Administration (FAA), U.S. Department of Transportation (DOT). ACTION: Notice of RTCA NextGen... of the RTCA NextGen Advisory Committee (NAC). DATES: The meeting will be held June 4, 2013 from...

  18. IVS Working Group 4: VLBI Data Structures

    NASA Technical Reports Server (NTRS)

    Gipson, John

    2010-01-01

    In 2007 the IVS Directing Board established IVS Working Group 4 on VLBI Data Structures. This note discusses the current VLBI data format, goals for a new format, the history and formation of the Working Group, and a timeline for the development of a new VLBI data format.

  19. CHLORINE ABSORPTION IN S(IV) SOLUTIONS

    EPA Science Inventory

    The report gives results of measurements of the rate of Chlorine (Cl2) absorption into aqueous sulfite/bisulfite -- S(IV) -- solutions at ambient temperature using a highly characterized stirred-cell reactor. The reactor media were 0 to 10 mM S(IV) with pHs of 3.5-8.5. Experiment...

  20. Stark broadening of B IV spectral lines

    NASA Astrophysics Data System (ADS)

    Dimitrijević, Milan S.; Christova, Magdalena; Simić, Zoran; Kovačević, Andjelka; Sahal-Bréchot, Sylvie

    2016-08-01

    Stark broadening parameters for 157 multiplets of helium-like boron (B IV) have been calculated using the impact semiclassical perturbation formalism. Obtained results have been used to investigate the regularities within spectral series. An example of the influence of Stark broadening on B IV lines in DO white dwarfs is given.

  1. Metsahovi Radio Observatory - IVS Network Station

    NASA Technical Reports Server (NTRS)

    Uunila, Minttu; Zubko, Nataliya; Poutanen, Markku; Kallunki, Juha; Kallio, Ulla

    2013-01-01

    In 2012, Metsahovi Radio Observatory together with Finnish Geodetic Institute officially became an IVS Network Station. Eight IVS sessions were observed during the year. Two spacecraft tracking and one EVN X-band experiment were also performed. In 2012, the Metsahovi VLBI equipment was upgraded with a Digital Base Band Converter, a Mark 5B+, a FILA10G, and a FlexBuff.

  2. Spectrosmicroscopic and spectroscopic investigation of U(IV) speciation in model mineral-organic matter assemblages

    NASA Astrophysics Data System (ADS)

    Bone, S.; Dynes, J.; Bargar, J.

    2015-12-01

    Both nanocrystalline uraninite (UO2) and non-crystalline U(IV) occur in anoxic sediments, controlling the fate and transport of U in contaminated aquifers. It is important to distinguish between these forms of U because non-crystalline species are more reactive towards oxidants and aqueous complexing ligands, increasing the likelihood of U re-release into groundwater in the presence of such solutes. Much work has been done to elucidate microbiological and geochemical conditions favoring non-crystalline U(IV) or UO2 formation, primarily in model systems containing a single type of U(VI)-reducing bacterium. Research suggests that microbial biomass, including cell walls and exopolymeric substances (EPS), can adsorb U(IV), likely via phosphoryl groups. Furthermore, conditions that favor EPS formation appear to promote non-crystalline U(IV) formation. Non-crystalline U(IV) formation is also favored in the presence of phosphate. However, U(IV) behavior in complicated systems containing competing U(IV) sorbents has not been studied. Investigations of U(IV) behavior in such systems are needed to understand uranium mobility in natural sediments, which contain multiple sinks for U(IV). We have developed a model system in which the native microbial consortia associated with partially decayed plant roots utilize homogenized root material to facilitate U(VI) reduction during anaerobic incubations. The model is intended to simulate an environment similar to that found in anoxic sediments where buried organic matter drives anaerobic respiration. We use this model to address the following questions: (1) Does U(IV) become associated with organic materials or minerals (or both)? (2) Does U(IV) form complexes with particular ligands, such as P? (3) Is UO2 produced when aqueous U(VI) concentrations are relatively low (~1 μM), which is typical of even contaminated sites? We have found that U(IV) does not form UO2 at low, environmentally relevant U:sorbent ratios. Furthermore

  3. Spectrosmicroscopic and spectroscopic investigation of U(IV) speciation in model mineral-organic matter assemblages

    NASA Astrophysics Data System (ADS)

    Booij, M. J.; Houtenbos, H.; Hoekstra, A. Y. Y.

    2014-12-01

    Both nanocrystalline uraninite (UO2) and non-crystalline U(IV) occur in anoxic sediments, controlling the fate and transport of U in contaminated aquifers. It is important to distinguish between these forms of U because non-crystalline species are more reactive towards oxidants and aqueous complexing ligands, increasing the likelihood of U re-release into groundwater in the presence of such solutes. Much work has been done to elucidate microbiological and geochemical conditions favoring non-crystalline U(IV) or UO2 formation, primarily in model systems containing a single type of U(VI)-reducing bacterium. Research suggests that microbial biomass, including cell walls and exopolymeric substances (EPS), can adsorb U(IV), likely via phosphoryl groups. Furthermore, conditions that favor EPS formation appear to promote non-crystalline U(IV) formation. Non-crystalline U(IV) formation is also favored in the presence of phosphate. However, U(IV) behavior in complicated systems containing competing U(IV) sorbents has not been studied. Investigations of U(IV) behavior in such systems are needed to understand uranium mobility in natural sediments, which contain multiple sinks for U(IV). We have developed a model system in which the native microbial consortia associated with partially decayed plant roots utilize homogenized root material to facilitate U(VI) reduction during anaerobic incubations. The model is intended to simulate an environment similar to that found in anoxic sediments where buried organic matter drives anaerobic respiration. We use this model to address the following questions: (1) Does U(IV) become associated with organic materials or minerals (or both)? (2) Does U(IV) form complexes with particular ligands, such as P? (3) Is UO2 produced when aqueous U(VI) concentrations are relatively low (~1 μM), which is typical of even contaminated sites? We have found that U(IV) does not form UO2 at low, environmentally relevant U:sorbent ratios. Furthermore

  4. Plutonium(IV) precipitates formed in alkaline media in the presence of various anions

    SciTech Connect

    Krot, N.N.; Shilov, V.P.; Yusov, A.B.; Tananaev, I.G.; Grigoriev, M.S.; Garnov, A.Yu.; Perminov, V.P.; Astafurova, L.N.

    1998-09-01

    The tendency of Pu(IV) to hydrolyze and form true solutions, colloid solutions, or insoluble precipitates has been known since the Manhattan Project. Since then, specific studies have been performed to examine in detail the equilibria of Pu(IV) hydrolytic reactions in various media. Great attention also has been paid to the preparation, structure, and properties of Pu(IV) polymers or colloids. These compounds found an important application in sol-gel technology for the preparation of nuclear fuel materials. A most important result of these works was the conclusion that Pu(IV) hydroxide, after some aging, consists of very small PuO{sub 2} crystallites and should therefore be considered to be Pu(IV) hydrous oxide. However, studies of the properties and behavior of solid Pu(IV) hydroxide in complex heterogeneous systems are rare. The primary goal of this investigation was to obtain data on the composition and properties of Pu(IV) hydrous oxide or other compounds formed in alkaline media under different conditions. Such information is important to understand Pu(IV) behavior and the forms of its existence in the Hanford Site alkaline tank waste sludge. This knowledge then may be applied in assessing plutonium criticality hazards in the storage, retrieval, and treatment of Hanford Site tank wastes as well as in understanding its contribution to the transuranic waste inventory (threshold at 100 nCi/g or about 5 {times} 10{sup {minus}6} M) of the separate solution and solid phases.

  5. Meet Mr. and Mrs. Gen X: A New Parent Generation

    ERIC Educational Resources Information Center

    Howe, Neil

    2010-01-01

    Slowly but surely, Generation Xers have been taking over from Baby Boomers as the majority of parents in elementary and secondary education. In the early 1990s, Gen Xers began joining parent-teacher associations in the nation's elementary schools. Around 2005, they became the majority of middle school parents. By the fall of 2008, they took over…

  6. A New Parent Generation: Meet Mr. and Mrs. Gen X

    ERIC Educational Resources Information Center

    Howe, Neil

    2010-01-01

    Slowly but surely, Generation Xers have been taking over from Baby Boomers as the majority of parents in elementary and secondary education. Gen-X parents and Boomer parents belong to two neighboring generations, each possessing its own location in history and its own peer personality. They are similar in some respects, but clearly different in…

  7. Safer Systems: A NextGen Aviation Safety Strategic Goal

    NASA Technical Reports Server (NTRS)

    Darr, Stephen T.; Ricks, Wendell R.; Lemos, Katherine A.

    2008-01-01

    The Joint Planning and Development Office (JPDO), is charged by Congress with developing the concepts and plans for the Next Generation Air Transportation System (NextGen). The National Aviation Safety Strategic Plan (NASSP), developed by the Safety Working Group of the JPDO, focuses on establishing the goals, objectives, and strategies needed to realize the safety objectives of the NextGen Integrated Plan. The three goal areas of the NASSP are Safer Practices, Safer Systems, and Safer Worldwide. Safer Practices emphasizes an integrated, systematic approach to safety risk management through implementation of formalized Safety Management Systems (SMS) that incorporate safety data analysis processes, and the enhancement of methods for ensuring safety is an inherent characteristic of NextGen. Safer Systems emphasizes implementation of safety-enhancing technologies, which will improve safety for human-centered interfaces and enhance the safety of airborne and ground-based systems. Safer Worldwide encourages coordinating the adoption of the safer practices and safer systems technologies, policies and procedures worldwide, such that the maximum level of safety is achieved across air transportation system boundaries. This paper introduces the NASSP and its development, and focuses on the Safer Systems elements of the NASSP, which incorporates three objectives for NextGen systems: 1) provide risk reducing system interfaces, 2) provide safety enhancements for airborne systems, and 3) provide safety enhancements for ground-based systems. The goal of this paper is to expose avionics and air traffic management system developers to NASSP objectives and Safer Systems strategies.

  8. 78 FR 8108 - NextGen Solutions Vendors Guide

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-05

    ... Organization's (ICAO) Aviation System Block Upgrade (ASBU) initiative. The NextGen solutions address the ICAO..., this request seeks responses from (e) the knowledge and service providers who can facilitate these... Efficiency through the initial application of Data Link En-Route (e) Knowledge and service providers...

  9. ORPC RivGen controller performance raw data - Igiugig 2015

    SciTech Connect

    Jarlath McEntee

    2015-12-18

    Contains raw data for operations of Ocean Renewable Power Company (ORPC) RivGen Power System in Igiugig 2015 in Matlab data file format. Two data files capture the data and timestamps for data, including power in, voltage, rotation rate, and velocity.

  10. Synthesis, composition, and ion-exchange behavior of thermally stable Zr(IV) and Ti(IV) arsenophosphates: separation of metal ions

    SciTech Connect

    Varshney, K.G.; Premadas, A.

    1981-01-01

    Two new inorganic ion-exchange materials, Zr(IV) and Ti(IV) arsenophosphates, have been synthesized. They are reproducible in behavior and possess excellent thermal stability. Their tentative structures have been proposed based on pH titrations, thermogravimetry, chemical analysis, ir studies, and other ion-exchange properties. Distribution studies of some metal ions have also been made on the basis of which several useful binary separations have been achieved such as Fe(III) from VO(II), Cu(II), and Zn(II); Pb(II) from Cu(II), Hg(II), and Zn(II); Ti(IV) from UO/sub 2/(II) and Ce(IV); and Mg(II) from Sr(II) and Ba(II).

  11. Construction and Physics program for MICE next step IV

    NASA Astrophysics Data System (ADS)

    Freemire, Ben

    2014-03-01

    The International Muon Ionisation Cooling Experiment is progressing towards full demonstration of the feasibility of this cooling technology decisive for neutrino physics and muon colliders. Its next step IV should provide the first precise measurements of emittances and first evidence of cooling. Spectrometer solenoids, muon trackers and absober-FC (focus coil) modules are being assembled to make this possible in 2015. The physics programme of ionization cooling Step IV measurements will be described in detail, with Li-H and a few other promising absorber materials of different shapes. So will the progress of the hardware. The longer term final step V and step VI complete demonstration measurements being simultaneously prepared (re-acceerating RFCC modules, RF cavities inside their own focusing CC (``coupling'' coils) will also be outlined. Muon Ionisation Cooling Experiment.

  12. AtGEN1 and AtSEND1, Two Paralogs in Arabidopsis, Possess Holliday Junction Resolvase Activity1[W][OPEN

    PubMed Central

    Bauknecht, Markus; Kobbe, Daniela

    2014-01-01

    Holliday junctions (HJs) are physical links between homologous DNA molecules that arise as central intermediary structures during homologous recombination and repair in meiotic and somatic cells. It is necessary for these structures to be resolved to ensure correct chromosome segregation and other functions. In eukaryotes, including plants, homologs of a gene called XPG-like endonuclease1 (GEN1) have been identified that process HJs in a manner analogous to the HJ resolvases of phages, archaea, and bacteria. Here, we report that Arabidopsis (Arabidopsis thaliana), a eukaryotic organism, has two functional GEN1 homologs instead of one. Like all known eukaryotic resolvases, AtGEN1 and Arabidopsis single-strand DNA endonuclease1 both belong to class IV of the Rad2/XPG family of nucleases. Their resolvase activity shares the characteristics of the Escherichia coli radiation and UV sensitive C paradigm for resolvases, which involves resolving HJs by symmetrically oriented incisions in two opposing strands. This leads to ligatable products without the need for further processing. The observation that the sequence context influences the cleavage by the enzymes can be interpreted as a hint for the existence of sequence specificity. The two Arabidopsis paralogs differ in their preferred sequences. The precise cleavage positions observed for the resolution of mobile nicked HJs suggest that these cleavage positions are determined by both the substrate structure and the sequence context at the junction point. PMID:25037209

  13. Surprising Coordination Geometry Differences in Ce(IV)- and Pu(IV)-Maltol Complexes

    SciTech Connect

    Lawrence Berkeley National Laboratory; Raymond, Kenneth; Szigethy, Geza; Xu, Jide; Gorden, Anne E.V.; Teat, Simon J.; Shuh, David K.; Raymond, Kenneth N.

    2008-02-12

    As part of a study to characterize the detailed coordination behavior of Pu(IV), single crystal X-ray diffraction structures have been determined for Pu(IV) and Ce(IV) complexes with the naturally-occurring ligand maltol (3-hydroxy-2-methyl-pyran-4-one) and its derivative bromomaltol (5-bromo-3-hydroxy-2-methyl-pyran-4-one). Although Ce(IV) is generally accepted as a structural analog for Pu(IV), and the maltol complexes of these two metals are isostructural, the corresponding bromomaltol complexes are strikingly different with respect to ligand orientation about the metal ion: All complexes exhibit trigonal dodecahedral coordination geometry but the Ce(IV)-bromomaltol complex displays an uncommon ligand arrangement not mirrored in the Pu(IV) complex, although the two metal species are generally accepted to be structural analogs.

  14. Evaluation of safety and efficacy of NexGen – an ultrathin strut and hybrid cell design cobalt-chromium bare metal stent implanted in a real life patient population – the Polish NexGen Registry

    PubMed Central

    Milewski, Krzysztof; Gąsior, Paweł; Samborski, Stefan; Buszman, Piotr P.; Błachut, Aleksandra; Młodziankowski, Adam; Mendyk, Artur; Król, Marek; Wojakowski, Wojciech; Buszman, Paweł E.

    2016-01-01

    Introduction Despite the dominance of drug-eluting stents in modern interventional cardiology, there is still a niche for bare metal stents. Aim The aim of the Polish NexGen registry was to evaluate the safety and efficacy of a new generation cobalt-chromium NexGen stent in a real life patient population. Material and methods A prospective multi-center registry was conducted in five clinical sites of American Heart of Poland. Three hundred and eighty-three patients who underwent percutaneous coronary intervention (PCI) with NexGen stent implantation were included. Clinical follow-up was performed at 1, 6 and 12 months. Additionally, a group of 42 randomly selected patients underwent control angiography at 6 months (10.96% of study population). The primary endpoint was occurrence of target vessel revascularization (TVR) at 6-month follow-up. Angiographic endpoints included rates of binary restenosis and late lumen loss at 6-month follow-up based on QCA analysis. Multivessel disease was present in more than 70% of patients, and 52.4% of lesions were complex. The main indications for angiography were non-ST elevation acute coronary syndromes (54.8%) and ST elevation myocardial infarction (34.99%). Results At 6-month follow-up 47 (12.7%) patients reached the primary endpoint of TVR. The composite of major acute cardiac event rates at 30-day and 6- and 12-month follow-up was 6.01% (n = 23), 18.5% (n = 69) and 25.21% (n = 92) respectively. Control angiography performed after 6 months showed in-stent late loss of 0.66 ±0.71 mm and a binary restenosis rate of 16.7%. Conclusions Our study showed that PCI with the NexGen stent is safe and effective at 6- and 12-month follow-up. Angiographic results showed a satisfactory restenosis rate and low late lumen loss. PMID:27625684

  15. Evaluation of safety and efficacy of NexGen – an ultrathin strut and hybrid cell design cobalt-chromium bare metal stent implanted in a real life patient population – the Polish NexGen Registry

    PubMed Central

    Milewski, Krzysztof; Gąsior, Paweł; Samborski, Stefan; Buszman, Piotr P.; Błachut, Aleksandra; Młodziankowski, Adam; Mendyk, Artur; Król, Marek; Wojakowski, Wojciech; Buszman, Paweł E.

    2016-01-01

    Introduction Despite the dominance of drug-eluting stents in modern interventional cardiology, there is still a niche for bare metal stents. Aim The aim of the Polish NexGen registry was to evaluate the safety and efficacy of a new generation cobalt-chromium NexGen stent in a real life patient population. Material and methods A prospective multi-center registry was conducted in five clinical sites of American Heart of Poland. Three hundred and eighty-three patients who underwent percutaneous coronary intervention (PCI) with NexGen stent implantation were included. Clinical follow-up was performed at 1, 6 and 12 months. Additionally, a group of 42 randomly selected patients underwent control angiography at 6 months (10.96% of study population). The primary endpoint was occurrence of target vessel revascularization (TVR) at 6-month follow-up. Angiographic endpoints included rates of binary restenosis and late lumen loss at 6-month follow-up based on QCA analysis. Multivessel disease was present in more than 70% of patients, and 52.4% of lesions were complex. The main indications for angiography were non-ST elevation acute coronary syndromes (54.8%) and ST elevation myocardial infarction (34.99%). Results At 6-month follow-up 47 (12.7%) patients reached the primary endpoint of TVR. The composite of major acute cardiac event rates at 30-day and 6- and 12-month follow-up was 6.01% (n = 23), 18.5% (n = 69) and 25.21% (n = 92) respectively. Control angiography performed after 6 months showed in-stent late loss of 0.66 ±0.71 mm and a binary restenosis rate of 16.7%. Conclusions Our study showed that PCI with the NexGen stent is safe and effective at 6- and 12-month follow-up. Angiographic results showed a satisfactory restenosis rate and low late lumen loss.

  16. Peroxiredoxin IV Protects Cells From Radiation-Induced Apoptosis in Head-and-Neck Squamous Cell Carcinoma

    SciTech Connect

    Park, Jung Je; Chang, Hyo Won; Jeong, Eun-Jeong; Roh, Jong-Lyel; Choi, Seung-Ho; Jeon, Sea-Yuong; Ko, Gyung Hyuck; Kim, Sang Yoon

    2009-03-15

    Purpose: Human peroxiredoxins (Prxs) are known as a family of thiol-specific antioxidant enzymes, among which Prx-I and -II play an important role in protecting cells from irradiation-induced cell death. It is not known whether Prx-IV also protects cells from ionizing radiation (IR). Methods and Materials: To evaluate the protective role of Prx-IV in IR, we transfected full-length Prx-IV cDNA into AMC-HN3 cells, which weakly express endogenous Prx-IV, and knocked down the expression of Prx-IV with siRNA methods using AMC-HN7 cells, which express high levels of endogenous Prx-IV. Radiosensitivity profiles in these cells were evaluated using clonogenic assay, FACS analysis, cell viability, and TUNEL assay. Results: Three Prx-IV expressing clones were isolated. Prx-IV regulated intracellular reactive oxygen species (ROS) levels and made cells more resistant to IR-induced apoptosis. Furthermore, the knockdown of Prx-IV with siRNA made cells more sensitive to IR-induced apoptosis. Conclusion: The results of these studies suggest that Prx-IV may play an important role in protecting cells from IR-induced apoptosis in head-and-neck squamous cell carcinoma.

  17. IV&V Project Assessment Process Validation

    NASA Technical Reports Server (NTRS)

    Driskell, Stephen

    2012-01-01

    The Space Launch System (SLS) will launch NASA's Multi-Purpose Crew Vehicle (MPCV). This launch vehicle will provide American launch capability for human exploration and travelling beyond Earth orbit. SLS is designed to be flexible for crew or cargo missions. The first test flight is scheduled for December 2017. The SLS SRR/SDR provided insight into the project development life cycle. NASA IV&V ran the standard Risk Based Assessment and Portfolio Based Risk Assessment to identify analysis tasking for the SLS program. This presentation examines the SLS System Requirements Review/System Definition Review (SRR/SDR), IV&V findings for IV&V process validation correlation to/from the selected IV&V tasking and capabilities. It also provides a reusable IEEE 1012 scorecard for programmatic completeness across the software development life cycle.

  18. Optimizing IV and V for Mature Organizations

    NASA Technical Reports Server (NTRS)

    Fuhman, Christopher

    2003-01-01

    NASA is intending for its future software development agencies to have at least a Level 3 rating in the Carnegie Mellon University Capability Maturity Model (CMM). The CMM has built-in Verification and Validation (V&V) processes that support higher software quality. Independent Verification and Validation (IV&V) of software developed by mature agencies can be therefore more effective than for software developed by less mature organizations. How is Independent V&V different with respect to the maturity of an organization? Knowing a priori the maturity of an organization's processes, how can IV&V planners better identify areas of need choose IV&V activities, etc? The objective of this research is to provide a complementary set of guidelines and criteria to assist the planning of IV&V activities on a project using a priori knowledge of the measurable levels of maturity of the organization developing the software.

  19. The determination of uranium (IV) in apatite

    USGS Publications Warehouse

    Clarke, Roy S.; Altschuler, Zalman S.

    1956-01-01

    Geologic and mineralogic evidence indicate that the uranium present in apatite may proxy for calcium in the mineral structure as U(IV). An experimental investigation was conducted and chemical evidence was obtained that establishes the presence of U(IV) in apatite. The following analytical procedure was developed for the determination of U(IV). Carbonate-fluorapatite is dissolved in cold 1.5M orthophosphoric acid and fluorapatite is dissolved in cold 1.2M hydrochloric acid containing 1.5 g of hydroxylamine hydrochloride per 100 ml. Uranium (IV) is precipitated by cupferron using titanium as a carrier. The uranium in the precipitate is separated by use of the ethyl acetate extraction procedure and determined fluorimetrically. The validity and the limitations of the method have been established by spike experiments.

  20. [Pu(IV) behavior in the serum].

    PubMed

    Surova, Z I

    1984-01-01

    This paper presents the results of studies of the hydrolysis and polymerization of Pu(IV) in blood serum. With nitrite Pu(IV) solutions incubated with blood serum 20-34% of the nuclide were precipitated as hydroxide and 11-36% converted into polymeric forms bound by high molecular weight proteins. For citrate solutions, these values were 3.8 and 3.0%, respectively. PMID:6505160

  1. Advanced Vehicle Concepts and Implications for NextGen

    NASA Technical Reports Server (NTRS)

    Blake, Matt; Smith, Jim; Wright, Ken; Mediavilla Ricky; Kirby, Michelle; Pfaender, Holger; Clarke, John-Paul; Volovoi, Vitali; Dorbian, Christopher; Ashok, Akshay; Reynolds, Tom; Waitz, Ian; Hileman, James; Arunachalam, Sarav; Hedrick, Matt; Vempati, Lakshmi; Laroza, Ryan; denBraven, Wim; Henderson, Jeff

    2010-01-01

    This report presents the results of a major NASA study of advanced vehicle concepts and their implications for the Next Generation Air Transportation System (NextGen). Comprising the efforts of dozens of researchers at multiple institutions, the analyses presented here cover a broad range of topics including business-case development, vehicle design, avionics, procedure design, delay, safety, environmental impacts, and metrics. The study focuses on the following five new vehicle types: Cruise-efficient short takeoff and landing (CESTOL) vehicles Large commercial tiltrotor aircraft (LCTRs) Unmanned aircraft systems (UAS) Very light jets (VLJs) Supersonic transports (SST). The timeframe of the study spans the years 2025-2040, although some analyses are also presented for a 3X scenario that has roughly three times the number of flights as today. Full implementation of NextGen is assumed.

  2. GenNet: A Platform for Hybrid Network Experiments.

    PubMed

    Kispersky, Tilman J; Economo, Michael N; Randeria, Pratik; White, John A

    2011-01-01

    We describe General Network (GenNet), a software plugin for the real time experimental interface (RTXI) dynamic clamp system that allows for straightforward and flexible implementation of hybrid network experiments. This extension to RTXI allows for hybrid networks that contain an arbitrary number of simulated and real neurons, significantly improving upon previous solutions that were limited, particularly by the number of cells supported. The benefits of this system include the ability to rapidly and easily set up and perform scalable experiments with hybrid networks and the ability to scan through ranges of parameters. We present instructions for installing, running and using GenNet for hybrid network experiments and provide several example uses of the system.

  3. Interstellar C IV and Si IV column densities toward early-type stars

    NASA Technical Reports Server (NTRS)

    Bruhweiler, F. C.; Kondo, Y.; Mccluskey, G. E.

    1980-01-01

    Equivalent widths and deduced column densities of Si IV and C IV are examined for 18 early-type close binaries, and physical processes responsible for the origin of these ions in the interstellar medium are investigated. The available C IV/Si IV column density ratios typically lie within a narrow range from 0.8 to 4.5, and there is evidence that the column density of C IV is higher than that of N V along most lines of sight, suggesting that C IV is not formed in the same hot region as O VI. In addition, the existence of regions with a narrowly defined new temperature range around 50,000 deg K is indicated. The detection of the semitorrid gas of Bruhweiler, Kondo, and McCluskey (1978, 1979) is substantiated, and the relation of this gas to the observations of coronal gas in the galactic halo is discussed.

  4. The Status of the Construction of MICE Step IV

    SciTech Connect

    Snopok, P.; Overton, E.

    2014-07-01

    The International Muon Ionization Cooling Experiment will provide the demononstration ionization cooling. The experiment is being built in a series of Steps. Step IV, which consists of a tracking spectrometer upstream and downstream of an absorber/focus-coil module will be completed in early in 2015. In this configuration, the emittance of the muon beam upstream and downstream of the absorbed will be measured precisely allowing the emittance reduction and the factors that determine the ionization-cooling effect to be studied in detail. Each tracking spectrometer consists of a scintillating-fibre tracker placed within a 4 T field provided by the superconducting spectrometer solenoid. The muon beam is transported to the absorber/focus-coil module: a 22 liter volume of liquid hydrogen placed inside a superconducting focusing coil. The properties of lithium hydride, and possibly other absorber materials, will also be studied. All the components of Step IV have been manufactured and integration of the experiment in the MICE Hall at the Rutherford Appleton Laboratory is underway. The construction and performance of Step IV will be described. A full study of ionization cooling will be carried out with Step V of the experiment which will include a short 201 MHz linac module in which beam transport is achieved with a superconducting “coupling-coil”. The status of the preparation of the components of Step V of the experiment will be described briefly.

  5. Technology evaluation: C242-DM1, ImmunoGen Inc.

    PubMed

    Smith, S

    2001-04-01

    C242-DM1 is a tumor-activated immunotoxin under development by GlaxoSmithKline plc (formerly SmithKline Beecham plc), under licence from ImmunoGen Inc, as a potential treatment for colon tumor. It consists of a colon cancer-specific humanized antibody, C242, conjugated to the maytansine derivative DM1. In preclinical studies, C242-DM1 caused complete tumor regression in animal models of both human pancreatic and non-small cell lung cancer (NSCLC) at non-toxic doses. C242-DM1 has also been evaluated in an immunoconjugate combination with J-591 (Cornell University). The J591-DM1 immunoconjugate demonstrated effective, antigen-specific delivery of a highly cytotoxic drug to PSMA-positive Pca cells in vitro and in vivo with low systemic toxicity. Results from studies in monkeys showed that C242-DM1 had no significant toxicity or side effects, when administered at doses higher than those that were previously shown to completely eradicate human colon tumors in mice [271420]. ImmunoGen acquired the right to evaluate, and an option to license, technology related to maytansines from Takeda. In February 1999, ImmunoGen and SmithKline Beecham signed a US $45 million development and commercialization agreement for C242-DM1 [313493]. In August 1997, Immunogen received an SBIR grant to advance development of huC242-DM1 [258356]. EP-00425235, held by ImmunoGen, covers conjugated forms of ansamitocin (maytansine) derivatives. Takeda holds several patents for the production of ansamitocin and its analogs, the first one being JP-53124692. PMID:11338934

  6. Advanced Photon Source Upgrade Project - Materials

    ScienceCinema

    Gibbson, Murray

    2016-07-12

    An upgrade to Advanced Photon Source announced by DOE - http://go.usa.gov/ivZ -- will help scientists break through bottlenecks in materials design in order to develop materials with desirable functions.

  7. Description of Teunomyces gen. nov. for the Candida kruisii clade, Suhomyces gen. nov. for the Candida tanzawaensis clade and Suhomyces kilbournensis sp. nov.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    DNA sequence analysis has shown that species of the Candida kruisii clade and species of the C. tanzawaensis clade represent phylogenetically circumscribed genera, which are described as Teunomyces gen. nov., type species T. kruisii, and Suhomyces gen. nov., type species S. tanzawaensis. Many of the...

  8. The GenABEL Project for statistical genomics

    PubMed Central

    Karssen, Lennart C.; van Duijn, Cornelia M.; Aulchenko, Yurii S.

    2016-01-01

    Development of free/libre open source software is usually done by a community of people with an interest in the tool. For scientific software, however, this is less often the case. Most scientific software is written by only a few authors, often a student working on a thesis. Once the paper describing the tool has been published, the tool is no longer developed further and is left to its own device. Here we describe the broad, multidisciplinary community we formed around a set of tools for statistical genomics. The GenABEL project for statistical omics actively promotes open interdisciplinary development of statistical methodology and its implementation in efficient and user-friendly software under an open source licence. The software tools developed withing the project collectively make up the GenABEL suite, which currently consists of eleven tools. The open framework of the project actively encourages involvement of the community in all stages, from formulation of methodological ideas to application of software to specific data sets. A web forum is used to channel user questions and discussions, further promoting the use of the GenABEL suite. Developer discussions take place on a dedicated mailing list, and development is further supported by robust development practices including use of public version control, code review and continuous integration. Use of this open science model attracts contributions from users and developers outside the “core team”, facilitating agile statistical omics methodology development and fast dissemination. PMID:27347381

  9. PowerGen Plc -- A commercial user of Orimulsion

    SciTech Connect

    Tombs, R.; Jones, A.

    1996-12-31

    PowerGen has been operating two power stations commercially on Orimulsion fuel since 1991. Prior to the conversions, both power stations, Ince and Richborough, experienced low load factors caused by the inconsistent, but on average, high fuel oil prices. Orimulsion provided an opportunity of economic operation at both power stations if it could be proved that the fuel could be burnt safely, efficiently and cleanly. Consequently, a series of trials was organized at both plants and these commenced in 1988. Ince was the first plant to use Orimulsion when single burner trials were conducted with the objective of selecting a suitable burner system for subsequent full boiler trials. Having developed burners which would ensure stable and clean combustion, full scale boiler trials were undertaken at both power stations in 1989. The key objectives of these trials were to establish the impact on the plant of handling and burning the fuel, to define hardware modifications that would be required for commercial operation and for the operators to gain experience with Orimulsion. Following different levels of plant modification at Ince and Richborough Power Stations, judged necessary as a result of the trials, commercial operation was begun. Since late 1991, PowerGen has consumed about 1.3m tonnes of Orimulsion each year. PowerGen has been able to develop a unique knowledge on all aspects of handling and burning Orimulsion. The intent of this paper is to provide an update of their experience under commercial operation.

  10. The GenABEL Project for statistical genomics.

    PubMed

    Karssen, Lennart C; van Duijn, Cornelia M; Aulchenko, Yurii S

    2016-01-01

    Development of free/libre open source software is usually done by a community of people with an interest in the tool. For scientific software, however, this is less often the case. Most scientific software is written by only a few authors, often a student working on a thesis. Once the paper describing the tool has been published, the tool is no longer developed further and is left to its own device. Here we describe the broad, multidisciplinary community we formed around a set of tools for statistical genomics. The GenABEL project for statistical omics actively promotes open interdisciplinary development of statistical methodology and its implementation in efficient and user-friendly software under an open source licence. The software tools developed withing the project collectively make up the GenABEL suite, which currently consists of eleven tools. The open framework of the project actively encourages involvement of the community in all stages, from formulation of methodological ideas to application of software to specific data sets. A web forum is used to channel user questions and discussions, further promoting the use of the GenABEL suite. Developer discussions take place on a dedicated mailing list, and development is further supported by robust development practices including use of public version control, code review and continuous integration. Use of this open science model attracts contributions from users and developers outside the "core team", facilitating agile statistical omics methodology development and fast dissemination.

  11. The GenABEL Project for statistical genomics.

    PubMed

    Karssen, Lennart C; van Duijn, Cornelia M; Aulchenko, Yurii S

    2016-01-01

    Development of free/libre open source software is usually done by a community of people with an interest in the tool. For scientific software, however, this is less often the case. Most scientific software is written by only a few authors, often a student working on a thesis. Once the paper describing the tool has been published, the tool is no longer developed further and is left to its own device. Here we describe the broad, multidisciplinary community we formed around a set of tools for statistical genomics. The GenABEL project for statistical omics actively promotes open interdisciplinary development of statistical methodology and its implementation in efficient and user-friendly software under an open source licence. The software tools developed withing the project collectively make up the GenABEL suite, which currently consists of eleven tools. The open framework of the project actively encourages involvement of the community in all stages, from formulation of methodological ideas to application of software to specific data sets. A web forum is used to channel user questions and discussions, further promoting the use of the GenABEL suite. Developer discussions take place on a dedicated mailing list, and development is further supported by robust development practices including use of public version control, code review and continuous integration. Use of this open science model attracts contributions from users and developers outside the "core team", facilitating agile statistical omics methodology development and fast dissemination. PMID:27347381

  12. Ferroelectricity and Phase Transitions in Monolayer Group-IV Monochalcogenides

    NASA Astrophysics Data System (ADS)

    Fei, Ruixiang; Kang, Wei; Yang, Li

    2016-08-01

    Ferroelectricity usually fades away as materials are thinned down below a critical value. We reveal that the unique ionic-potential anharmonicity can induce spontaneous in-plane electrical polarization and ferroelectricity in monolayer group-IV monochalcogenides M X (M =Ge , Sn; X =S , Se). An effective Hamiltonian has been successfully extracted from the parametrized energy space, making it possible to study the ferroelectric phase transitions in a single-atom layer. The ferroelectricity in these materials is found to be robust and the corresponding Curie temperatures are higher than room temperature, making them promising for realizing ultrathin ferroelectric devices of broad interest. We further provide the phase diagram and predict other potentially two-dimensional ferroelectric materials.

  13. Ferroelectricity and Phase Transitions in Monolayer Group-IV Monochalcogenides.

    PubMed

    Fei, Ruixiang; Kang, Wei; Yang, Li

    2016-08-26

    Ferroelectricity usually fades away as materials are thinned down below a critical value. We reveal that the unique ionic-potential anharmonicity can induce spontaneous in-plane electrical polarization and ferroelectricity in monolayer group-IV monochalcogenides MX (M=Ge, Sn; X=S, Se). An effective Hamiltonian has been successfully extracted from the parametrized energy space, making it possible to study the ferroelectric phase transitions in a single-atom layer. The ferroelectricity in these materials is found to be robust and the corresponding Curie temperatures are higher than room temperature, making them promising for realizing ultrathin ferroelectric devices of broad interest. We further provide the phase diagram and predict other potentially two-dimensional ferroelectric materials. PMID:27610884

  14. Sandrewia, n. gen., a problematical plant from the Lower Permian of Texas and Kansas

    USGS Publications Warehouse

    Mamay, S.H.

    1975-01-01

    Sandrewia, n. gen., monotypified by S. texana, n. sp., is a plant from Lower Permian beds of north-central Texas and east-central Kansas. It is characterized by stout axes with spirally disposed, laxly inserted, petiolate leaves; the laminae are broadly flabelliform with coarse, open venation. The leaves are reminiscent of the vojnovskyalean Nephropsis, of the Permian Petchora Basin, U.S.S.R., but biologic relationships are only speculative because of limited material. However, leaf characteristics render Sandrewia easily identifiable. Its presently limited stratigraphic range, along with floristic associations, indicates it may be a useful guide fossil and supports the author's beliefs regarding important times and places in Paleozoic plant evolution. ?? 1975.

  15. Axis IV--psychosocial and environmental problems--in the DSM-IV.

    PubMed

    Ramirez, A; Ekselius, L; Ramklint, M

    2013-11-01

    The aim of this study was to further explore the properties of axis IV in the Diagnostic and statistical manual of mental disorders, 4th edition (DSM-IV). In a naturalistic cross-sectional design, a group (n = 163) of young (18-25 years old) Swedish psychiatric outpatients was assessed according to DSM-IV. Psychosocial and environmental problems/axis IV were evaluated through structured interviewing by a social worker and by self-assessment on a questionnaire. Reliability between professional assessment and self-assessment of axis IV was examined. Concurrent validity of axis IV was also examined. Reliability between professional and self-assessed axis IV was fair to almost perfect, 0.31-0.83, according to prevalence and bias-adjusted kappa. Categories of psychosocial stress and environmental problems were related to the presence of axis I disorders, co-morbidity, personality disorders and decreasing Global Assessment of Functioning (GAF) values. The revised axis IV according to DSM-IV seems to have concurrent validity, but is still hampered by limited reliability.

  16. A Chiral, Photoluminescent, and Spin-Canted {Cu(I)Re(IV)2}n Branched Chain.

    PubMed

    Martínez-Lillo, José; Armentano, Donatella; Fortea-Pérez, Francisco R; Stiriba, Salah-Eddine; De Munno, Giovanni; Lloret, Francesc; Julve, Miguel; Faus, Juan

    2015-05-18

    A new heteroleptic 1D Cu(I)-Re(IV) coordination polymer of the formula {Cu(I)Re(IV)Cl4(μ-Cl)(μ-pyz)[Re(IV)Cl4(μ-bpym)]}n·nMeNO2 (1; pyz = pyrazine, bpym = 2,2'-bipyrimidine) has been prepared through the Cu(I)-mediated self-assembly of two different Re(IV) metalloligands, namely, [ReCl5(pyz)](-) and [ReCl4(bpym)]. 1 consists of chiral branched chains with an overall rack-type architecture displaying photoemission and magnetic ordering. These results constitute a first step toward making new multifunctional magnetic materials based on mixed 3d-5d molecular systems.

  17. Evaluating SoilGen2 as a tool for projecting soil evolution induced by global change.

    PubMed

    Keyvanshokouhi, Saba; Cornu, Sophie; Samouëlian, Anatja; Finke, Peter

    2016-11-15

    To protect soils against threats, it is necessary to predict the consequences of human activities and global change on their evolution on a ten to hundred year time scale. Mechanistic modelling of soil evolution is then a useful tool. We analysed the ability of the SoilGen model to be used for projections of soil characteristics associated to various soil threats: vertical distributions of <2μm fraction, organic carbon content (OC), bulk density and pH. This analysis took the form of a functional sensitivity analysis in which we varied the initial conditions (parent material properties) and boundary conditions (co-evolution of precipitation and temperature; type and amount of fertilization and tillage as well as duration of agriculture). The simulated scenario variants comprised anthroposequences in Luvisols at two sites with one default scenario, six variants for initial conditions and 12 variants for boundary conditions. The variants reflect the uncertainties to our knowledge of parent material properties or reconstructed boundary conditions. We demonstrated a sensitivity of the model to climate and agricultural practices for all properties. We also conclude that final model results are not significantly affected by the uncertainties of boundary conditions for long simulations runs, although influenced by uncertainties on initial conditions. The best results were for organic carbon, although improvements can be reached through calibration or by incorporating a dynamic vegetation growth module in SoilGen. Results were poor for bulk density due to a fixed-volume assumption in the model, which is not easily modified. The <2μm fraction depth patterns are reasonable but the process of clay new formation needs to be added to obtain the belly shape of the Bt horizon. After calibration for organic carbon under agriculture, the model is suitable for producing soil projections due to global change. PMID:27470670

  18. Pantanalinema gen. nov. and Alkalinema gen. nov.: novel pseudanabaenacean genera (Cyanobacteria) isolated from saline-alkaline lakes.

    PubMed

    Vieira Vaz, Marcelo Gomes Marçal; Genuário, Diego Bonaldo; Andreote, Ana Paula Dini; Malone, Camila Francieli Silva; Sant'Anna, Célia Leite; Barbiero, Laurent; Fiore, Marli Fátima

    2015-01-01

    The genus Leptolyngbya Anagnostidis & Komárek (1988) was described from a set of strains identified as 'LPP-group B'. The morphology within this group is not particularly informative and underestimates the group's genetic diversity. In the present study, two new pseudanabaenacean genera related to Leptolyngbya morphotypes, Pantanalinema gen. nov. and Alkalinema gen. nov., are described under the provisions of the International Code of Nomenclature for Algae, Fungi and Plants, based on a polyphasic approach. Pantanalinema gen. nov. (type species Pantanalinema rosaneae sp. nov.) has sheaths and trichomes with slight gliding motility, which distinguish this genus from Alkalinema gen. nov. (type species Alkalinema pantanalense sp. nov.), which possesses trichomes arranged in an ornate (interwoven) pattern. 16S rRNA gene sequences of strains of Pantanalinema and Alkalinema exhibited low identity to each other (≤91.6 %) and to other sequences from known pseudanabaenacean genera (≤94.3 and 93.7 %, respectively). In a phylogenetic reconstruction, six sequences from strains of Pantanalinema and four from strains of Alkalinema formed two separate and robust clades (99 % bootstrap value), with the genera Oculatella and Phormidesmis, respectively, as the closest related groups. 16S-23S rRNA intergenic spacer sequences and secondary structures of strains of Pantanalinema and Alkalinema did not correspond to any previous descriptions. The strains of Pantanalinema and Alkalinema were able to survive and produce biomass at a range of pH (pH 4-11) and were also able to alter the culture medium to pH values ranging from pH 8.4 to 9.9. These data indicate that cyanobacterial communities in underexplored environments, such as the Pantanal wetlands, are promising sources of novel taxa.

  19. Design of Radiation-Tolerant Structural Alloys for Generation IV Nuclear Energy Systems

    SciTech Connect

    Allen, T.R.; Was, G.S.; Bruemmer, S.M.; Gan, J.; Ukai, S.

    2005-12-28

    The objective of this program is to improve the radiation tolerance of both austenitic and ferritic-martensitic (F-M) alloys projected for use in Generation IV systems. The expected materials limitations of Generation IV components include: creep strength, dimensional stability, and corrosion/stress corrosion compatibility. The material design strategies to be tested fall into three main categories: (1) engineering grain boundaries; (2) alloying, by adding oversized elements to the matrix; and (3) microstructural/nanostructural design, such as adding matrix precipitates. These three design strategies were tested across both austenitic and ferritic-martensitic alloy classes

  20. Rhizonema sequoiae n.gen. n.sp. from Coast Redwood Sequoia sempervirens (D.Don) Endl.

    PubMed

    Del Prado Vera, I C; Lownsbery, B F; Maggenti, A R

    1983-07-01

    Rhizonema sequoiae n.gen, u. sp. is described from the roots of Coast Redwood, Sequoia sempervirens (D. Don) Endl., growing near Lake Lagunitas, Marin County, California. Rhizonema females are annulated over their entire bodies, are wholly embedded in host tissue, and secrete an abundant amount of gel material. Mature females do not form a cyst. The vulva is located on a large posterior terminal cone, and the anus is on the dorsal vulval lip. Esophageal glands of the second-stage larvae fill more than half of the body cavity. Tails of the vermiform males are blunt, and a cloacal tubus is present.

  1. J3Gen: A PRNG for Low-Cost Passive RFID

    PubMed Central

    Melià-Seguí, Joan; Garcia-Alfaro, Joaquin; Herrera-Joancomartí, Jordi

    2013-01-01

    Pseudorandom number generation (PRNG) is the main security tool in low-cost passive radio-frequency identification (RFID) technologies, such as EPC Gen2. We present a lightweight PRNG design for low-cost passive RFID tags, named J3Gen. J3Gen is based on a linear feedback shift register (LFSR) configured with multiple feedback polynomials. The polynomials are alternated during the generation of sequences via a physical source of randomness. J3Gen successfully handles the inherent linearity of LFSR based PRNGs and satisfies the statistical requirements imposed by the EPC Gen2 standard. A hardware implementation of J3Gen is presented and evaluated with regard to different design parameters, defining the key-equivalence security and nonlinearity of the design. The results of a SPICE simulation confirm the power-consumption suitability of the proposal. PMID:23519344

  2. Remarks on Peinado et al.'s Analysis of J3Gen

    PubMed Central

    Garcia-Alfaro, Joaquin; Herrera-Joancomartí, Jordi; Melià-Seguí, Joan

    2015-01-01

    Peinado et al. analyzed the security of the J3Gen pseudorandom number generator proposed by Melià-Seguí et al., and claimed weaknesses regarding its security properties. They also presented a deterministic attack based on the decimation of the J3Gen output sequences. We show that the assumptions made by Peinado et al. are not correct and that the proposed deterministic attack against J3Gen does not hold in practice. PMID:25781510

  3. Measurement of the neutron electric form factor GEn in quasielastic scattering

    SciTech Connect

    Donal Day

    2003-07-15

    We have measured the electric form factor of the neutron, GEn, at two momentum transfers (Q2= 0.5 and Q2= 1.0 GeV/c2) through quasielastic scattering in Jefferson Lab's Hall C. Longitudinally polarized electrons scattered from polarized deuterated ammonia and GEn was extracted from the beam-target asymmetry AVed which, in quasielastic kinematics, is particularly sensitive to GEn and insensitive to MEC and FSI.

  4. 45 CFR 1355.21 - E and IV-B.

    Code of Federal Regulations, 2010 CFR

    1996-10-01

    ... compliance with the Department's regulations listed in 45 CFR 1355.30. (c) The State plans and plan... requirements for titles IV PUBLIC WELFARE Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN.... 1355.21 State plan requirements for titles IV-E and IV-B. (a) The State plans for titles IV-E and...

  5. 40 CFR Appendix IV to Part 266 - Reference Air Concentrations*

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Reference Air Concentrations* IV Appendix IV to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES... MANAGEMENT FACILITIES Pt. 266, App. IV Appendix IV to Part 266—Reference Air Concentrations* Constituent...

  6. 46 CFR Appendix IV to Part 150 - Data Sheet

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Data Sheet IV Appendix IV to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, App. IV Appendix IV to Part 150—Data Sheet EC02FE91.080 EC02FE91.081...

  7. 46 CFR Appendix IV to Part 150 - Data Sheet

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Data Sheet IV Appendix IV to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, App. IV Appendix IV to Part 150—Data Sheet EC02FE91.080 EC02FE91.081...

  8. 46 CFR Appendix IV to Part 150 - Data Sheet

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Data Sheet IV Appendix IV to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, App. IV Appendix IV to Part 150—Data Sheet EC02FE91.080 EC02FE91.081...

  9. 46 CFR Appendix IV to Part 150 - Data Sheet

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Data Sheet IV Appendix IV to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, App. IV Appendix IV to Part 150—Data Sheet EC02FE91.080 EC02FE91.081...

  10. 46 CFR Appendix IV to Part 150 - Data Sheet

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Data Sheet IV Appendix IV to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, App. IV Appendix IV to Part 150—Data Sheet EC02FE91.080 EC02FE91.081...

  11. Ca2+ block and flickering both contribute to the negative slope of the IV curve in BK channels.

    PubMed

    Schroeder, Indra; Thiel, Gerhard; Hansen, Ulf-Peter

    2013-04-01

    Single-channel current-voltage (IV) curves of human large-conductance, voltage- and Ca(2+)-activated K(+) (BK) channels are quite linear in 150 mM KCl. In the presence of Ca(2+) and/or Mg(2+), they show a negative slope conductance at high positive potentials. This is generally explained by a Ca(2+)/Mg(2+) block as by Geng et al. (2013. J. Gen. Physiol. http://dx.doi.org/10.1085/jgp.201210955) in this issue. Here, we basically support this finding but add a refinement: the analysis of the open-channel noise by means of β distributions reveals what would be found if measurements were done with an amplifier of sufficient temporal resolution (10 MHz), namely that the block by 2.5 mM Ca(2+) and 2.5 mM Mg(2+) per se would only cause a saturating curve up to +160 mV. Further bending down requires the involvement of a second process related to flickering in the microsecond range. This flickering is hardly affected by the presence or absence of Ca(2+)/Mg(2+). In contrast to the experiments reported here, previous experiments in BK channels (Schroeder and Hansen. 2007. J. Gen. Physiol. http://dx.doi.org/10.1085/jgp.200709802) showed saturating IV curves already in the absence of Ca(2+)/Mg(2+). The reason for this discrepancy could not be identified so far. However, the flickering component was very similar in the old and new experiments, regardless of the occurrence of noncanonical IV curves. PMID:23530139

  12. Seafloor earthquake measurement system, SEMS IV

    SciTech Connect

    Platzbecker, M.R.; Ehasz, J.P.; Franco, R.J.

    1997-07-01

    Staff of the Telemetry Technology Development Department (2664) have, in support of the U.S. Interior Department Mineral Management Services (MMS), developed and deployed the Seafloor Earthquake Measurement System IV (SEMS IV). The result of this development project is a series of three fully operational seafloor seismic monitor systems located at offshore platforms: Eureka, Grace, and Irene. The instrument probes are embedded from three to seven feet into the seafloor and hardwired to seismic data recorders installed top side at the offshore platforms. The probes and underwater cables were designed to survive the seafloor environment with an operation life of five years. The units have been operational for two years and have produced recordings of several minor earthquakes in that time. Sandia Labs will transfer operation of SEMS IV to MMS contractors in the coming months. 29 figs., 25 tabs.

  13. Synthesis and Properties of Group IV Graphane Analogues

    NASA Astrophysics Data System (ADS)

    Goldberger, Joshua

    Similar to how carbon networks can be sculpted into low-dimensional allotropes such as fullerenes, nanotubes, and graphene with fundamentally different properties, it is possible to create similar ligand terminated sp3-hybridized honeycomb graphane derivatives containing Ge or Sn that feature unique and tunable properties. Here, we will describe our recent success in the creation of hydrogen and organic-terminated group IV graphane analogues, from the topochemical deintercalation of precursor Zintl phases, such as CaGe2. We will discuss how the optical, electronic, and thermal properties of these materials can be systematically controlled by substituting either the surface ligand or via alloying with other Group IV elements. Additionally, we have also developed an epitopotaxial approach for integrating precise thicknesses of germanane layers onto Ge wafers that combines the epitaxial deposition of CaGe2 precursor phases with the topotactic interconversion into the 2D material. Finally, we will describe our recent efforts on the synthesis and crystal structures of Sn-containing graphane alloys in order to access novel topological phenomena predicted to occur in these graphanes.

  14. THE VERSATILE BACTERIAL TYPE IV SECRETION SYSTEMS

    PubMed Central

    Cascales, Eric; Christie, Peter J.

    2013-01-01

    Bacteria use type IV secretion systems for two fundamental objectives related to pathogenesis — genetic exchange and the delivery of effector molecules to eukaryotic target cells. Whereas gene acquisition is an important adaptive mechanism that enables pathogens to cope with a changing environment during invasion of the host, interactions between effector and host molecules can suppress defence mechanisms, facilitate intracellular growth and even induce the synthesis of nutrients that are beneficial to bacterial colonization. Rapid progress has been made towards defining the structures and functions of type IV secretion machines, identifying the effector molecules, and elucidating the mechanisms by which the translocated effectors subvert eukaryotic cellular processes during infection. PMID:15035043

  15. Incommensurate Structure of Phosphorus Phase IV

    SciTech Connect

    Fujihisa, Hiroshi; Gotoh, Yoshito; Yamawaki, Hiroshi; Sakashita, Mami; Takeya, Satoshi; Honda, Kazumasa; Akahama, Yuichi; Kawamura, Haruki; Ohishi, Yasuo

    2007-04-27

    There are six known phases for phosphorus at room temperature under high pressure. Only the structure of phase IV, which exists from 107 GPa to 137 GPa, remains unsolved. We performed a powder x-ray diffraction experiment and a Rietveld analysis and successfully determined its structure to be an incommensurately modulated structure by only 1 site of atomic position. High-pressure phases of halogens and chalcogens have previously been shown to have a similar modulated structure; however, phosphorus phase IV is different from them and was shown to be the third case.

  16. Diluted Magnetic Iv-Vi Compounds

    NASA Astrophysics Data System (ADS)

    Bauer, G.; Pascher, H.

    The following sections are included: * INTRODUCTION * MAGNETIC PROPERTIES * Susceptibility * High Field Magnetization * Spin Glass Phase * Free Carrier Induced Ferromagnetism * Magnetic Properties of Layered IV-VI Diluted Magnetic Semiconductors * CALCULATION OF LANDAU STATES: MEAN FIELD THEORY FOR IV-VI COMPOUNDS * MAGNETOTRANSPORT * OPTICAL INTERBAND TRANSITIONS * Photoluminescence Without Magnetic Field * Magnetooptical Interband Transitions * COHERENT RAMAN SCATTERING * Theory * Classical approach * Nonlinear susceptibility in semiconductors * Experimental Results and Discussion * Results: Pb1-xMnxTe * Results: Pb1-xEuxSe * Effective Electron and Hole g factors * FAR INFRARED SPECTROSCOPY * COMPARISON EXPERIMENT - MOLECULAR FIELD THEORY * Band and Exchange Parameters * Selection Rules * CONCLUSION * ACKNOWLEDGEMENTS * REFERENCES

  17. Self-Organization of Zr(IV) Porphyrinoids on Graphene Oxide Surfaces by Axial Metal Coordination

    PubMed Central

    Jurow, Matthew; Manichev, Viacheslav; Pabon, Cesar; Hageman, Brian; Matolina, Yuliya; Drain, Charles Michael

    2013-01-01

    The protruding oxophilic central metal ion of ZrIV porphyrinoids facilitates axial coordination to the oxygen bearing functional groups on graphene oxide (GO) surfaces to result in new supramolecular photonic materials with high dye loading especially on edges and large defects. The reaction proceeds at room temperature with GO dispersed in tetrahydrofuran and GO films on glass. Since the ZrIV serves as a conduit, the photophysical properties of the dye sensitized GO derive from both the axially bound chromophores and the GO substrate. Self-organization of metalloporphyrinoids on GO mediated by axial coordination of group (IV) metal ions allows for direct sensitization of graphene and graphenic materials without requiring covalent chemistries with poorly conducting linkers. PMID:24007316

  18. Self-organization of Zr(IV) porphyrinoids on graphene oxide surfaces by axial metal coordination.

    PubMed

    Jurow, Matthew; Manichev, Viacheslav; Pabon, Cesar; Hageman, Brian; Matolina, Yuliya; Drain, Charles Michael

    2013-09-16

    The protruding oxophilic central metal ion of Zr(IV) porphyrinoids facilitates axial coordination to the oxygen bearing functional groups on graphene oxide (GO) surfaces to result in new supramolecular photonic materials with high dye loading especially on edges and large defects. The reaction proceeds at room temperature with GO dispersed in tetrahydrofuran and GO films on glass. Since the Zr(IV) serves as a conduit, the photophysical properties of the dye sensitized GO derive from both the axially bound chromophores and the GO substrate. Self-organization of metalloporphyrinoids on GO mediated by axial coordination of group (IV) metal ions allows for direct sensitization of graphene and graphenic materials without requiring covalent chemistries with poorly conducting linkers.

  19. Polarization and valley switching in monolayer group-IV monochalcogenides

    NASA Astrophysics Data System (ADS)

    Hanakata, Paul Z.; Carvalho, Alexandra; Campbell, David K.; Park, Harold S.

    2016-07-01

    Group-IV monochalcogenides are a family of two-dimensional puckered materials with an orthorhombic structure that is comprised of polar layers. In this article, we use first principles calculations to show the multistability of monolayer SnS and GeSe, two prototype materials where the direction of the puckering can be switched by application of tensile stress or electric field. Furthermore, the two inequivalent valleys in momentum space, which are dictated by the puckering orientation, can be excited selectively using linearly polarized light, and this provides an additional tool to identify the polarization direction. Our findings suggest that SnS and GeSe monolayers may have observable ferroelectricity and multistability, with potential applications in information storage.

  20. Meloneis Gen. Nov., a New Epipsammic Genus of Rhaphoneidaceae (Bacillariophyceae)

    PubMed Central

    Louvrou, Ioanna; Danielidis, Daniel B.; Economou-Amilli, Athena

    2012-01-01

    The diatom family Rhaphoneidaceae is characterized by high generic diversity and low species diversity with most genera known to have long stratigraphic ranges. The genera within this family are neritic marine, and mostly epipsammic. A new modern and epipsammic genus, Meloneis gen. nov., is described herein and is compared to all genera within Rhaphoneidaceae and especially to Rhaphoneis Ehrenberg s.l. Within Meloneis three new species and one variety are distinguished and described herein: M. mimallis sp. nov., M. mimallis var. zephyria var. nov., M. akytos sp. nov., and M. gorgis sp. nov. PMID:22442663

  1. Frigitilla gen. nov., a new genus of Amazonian Mutillidae (Hymenoptera).

    PubMed

    Bartholomay, Pedro R; Williams, Kevin A; Luz, David R; Morato, Elder F

    2015-01-01

    Mutilla frigidula Cresson, 1902 was transferred to Tobantilla by Williams et al. (2011), based on morphological similarities with females of that genus. Discovery of the male of this species indicated significant morphological differences from Tobantilla. We therefore erect the genus, Frigitilla gen. nov., for Mutilla frigidula. Herein, we describe the male of F. frigidula (Cresson, 1902), comb. nov., associate it with its host (Trypoxylon spp.), and discuss its relations to other mutillid genera. The impact of collecting method and specimen age on the integumental coloration of specimens is discussed, emphasizing the need to diagnose species on consistent structural features rather than differences in color pattern.

  2. Ultrastructure and 18S rDNA phylogeny of Apoikia lindahlii comb. nov. (Chrysophyceae) and its epibiontic protists, Filos agilis gen. et sp. nov. (Bicosoecida) and Nanos amicus gen. et sp. nov. (Bicosoecida).

    PubMed

    Kim, Eunsoo; Yubuki, Naoji; Leander, Brian S; Graham, Linda E

    2010-04-01

    Three heterotrophic stramenopiles--Apoikia lindahlii comb. nov. (Chrysophyceae), Filos agilis gen. et sp. nov. (Bicosoecida), and Nanos amicus gen. et sp. nov. (Bicosoecida)--were isolated from acidic peat bogs. The biflagellate A. lindahlii forms loose irregular colonies from which swimming cells may detach, and produces extensive mucilaginous material containing bacterial cells. Phylogenetic analyses of small subunit rDNA sequences demonstrated that A. lindahlii branches within the Chrysophyceae. While A. lindahlii is an obligate heterotroph, ultrastructural observations revealed a leukoplast in the perinuclear region. The pico-sized uniflagellates F. agilis and N. amicus were isolated from separate lakes and within the mucilage of A. lindahlii, suggesting their close associations in natural habitats. In SSU rDNA phylogenies, F. agilis and N. amicus were closely related to the bicosoecids Adriamonas, Siluania, Paramonas, and Nerada. While Filos, Nanos, and Siluania are similar in light microscopic features, their SSU rDNA gene sequences differed significantly (>8% differences) and were not monophyletic. Both F. agilis and N. amicus have a cytostome/cytopharynx particle ingestion apparatus. Bacterial cells and material similar to the mucilage of A. lindahlii occurred within the food vacuole of F. agilis and N. amicus. The nature of association between A. lindahlii and its epibiontic bicosoecids is discussed.

  3. Mononuclear nonheme iron(IV)-oxo and manganese(IV)-oxo complexes in oxidation reactions: experimental results prove theoretical prediction.

    PubMed

    Chen, Junying; Cho, Kyung-Bin; Lee, Yong-Min; Kwon, Yoon Hye; Nam, Wonwoo

    2015-08-25

    Reactivities of mononuclear nonheme iron(IV)-oxo and manganese(IV)-oxo complexes bearing a pentadentate N4Py ligand, [M(IV)O(N4Py)](2+) (M = Fe and Mn), are compared in hydrogen atom transfer (HAT) and oxygen atom transfer (OAT) reactions; theoretical and experimental results show that Fe(IV)O is more reactive than Mn(IV)O. The latter is shown to react through excited state reactivity (ESR).

  4. Painlevé IV coherent states

    SciTech Connect

    Bermudez, David; Contreras-Astorga, Alonso; Fernández C, David J.

    2014-11-15

    A simple way to find solutions of the Painlevé IV equation is by identifying Hamiltonian systems with third-order differential ladder operators. Some of these systems can be obtained by applying supersymmetric quantum mechanics (SUSY QM) to the harmonic oscillator. In this work, we will construct families of coherent states for such subset of SUSY partner Hamiltonians which are connected with the Painlevé IV equation. First, these coherent states are built up as eigenstates of the annihilation operator, then as displaced versions of the extremal states, both involving the related third-order ladder operators, and finally as extremal states which are also displaced but now using the so called linearized ladder operators. To each SUSY partner Hamiltonian corresponds two families of coherent states: one inside the infinite subspace associated with the isospectral part of the spectrum and another one in the finite subspace generated by the states created through the SUSY technique. - Highlights: • We use SUSY QM to obtain Hamiltonians with third-order differential ladder operators. • We show that these systems are related with the Painlevé IV equation. • We apply different definitions of coherent states to these Hamiltonians using the third-order ladder operators and some linearized ones. • We construct families of coherent states for such systems, which we called Painlevé IV coherent states.

  5. Intelsat IV-F5 Launch

    NASA Technical Reports Server (NTRS)

    1972-01-01

    An Atlas-Centaur space vehicle lifted off at 5:53 p.m. EDT, June 13, 1972, from Complex 36B carrying an Intelsat Communications Satellite, (Intelsat IV-F5) into Earth orbit. Visible in the foreground is the lighthouse located at Cape Canaveral Air Force Station.

  6. Industrial Waste Landfill IV upgrade package

    SciTech Connect

    Not Available

    1994-03-29

    The Y-12 Plant, K-25 Site, and ORNL are managed by DOE`s Operating Contractor (OC), Martin Marietta Energy Systems, Inc. (Energy Systems) for DOE. Operation associated with the facilities by the Operating Contractor and subcontractors, DOE contractors and the DOE Federal Building result in the generation of industrial solid wastes as well as construction/demolition wastes. Due to the waste streams mentioned, the Y-12 Industrial Waste Landfill IV (IWLF-IV) was developed for the disposal of solid industrial waste in accordance to Rule 1200-1-7, Regulations Governing Solid Waste Processing and Disposal in Tennessee. This revised operating document is a part of a request for modification to the existing Y-12 IWLF-IV to comply with revised regulation (Rule Chapters 1200-1-7-.01 through 1200-1-7-.08) in order to provide future disposal space for the ORR, Subcontractors, and the DOE Federal Building. This revised operating manual also reflects approved modifications that have been made over the years since the original landfill permit approval. The drawings referred to in this manual are included in Drawings section of the package. IWLF-IV is a Tennessee Department of Environmental and Conservation/Division of Solid Waste Management (TDEC/DSWM) Class 11 disposal unit.

  7. Leveraging Information Technology. Track IV: Support Services.

    ERIC Educational Resources Information Center

    CAUSE, Boulder, CO.

    Seven papers from the 1987 CAUSE conference's Track IV, Support Services, are presented. They include: "Application Development Center" (John F. Leydon); "College Information Management System: The Design and Implementation of a Completely Integrated Office Automation and Student Information System" (Karen L. Miselis); "Improving Managerial…

  8. Hunting for new restriction enzymes in GenBank

    SciTech Connect

    Roberts, R.J.

    1997-12-01

    Restriction enzyme genes are hard to identify unless their surrounding sequences are available. This is because the best definition of a restriction enzyme gene is an open reading frame, that looks like nothing else in GenBank, but lies close to a DNA methylase gene. There are other clues too, such as nearby reading frames that code control proteins or the DNA specificity subunits of Type I restriction enzymes. We are developing software that searches the daily updates of GenBank to find candidate restriction enzyme genes. This is being followed by bench experiments to see of the predictions are correct. More than 50 potential new restriction enzymes have been predicted and it is quite remarkable that the density of restriction enzyme genes in microbial DNA is greater than one system per 200 Kb. The software development is emphasizing the graphic presentation of the search results. The approach could be used for other situations where a molecular biologist is interested to find new examples of their favorite genes.

  9. Next gen wavelets down-sampling preserving statistics

    NASA Astrophysics Data System (ADS)

    Szu, Harold; Miao, Lidan; Chanyagon, Pornchai; Cader, Masud

    2007-04-01

    We extend the 2 nd Gen Discrete Wavelet Transform (DWT) of Swelden to the Next Generations (NG) Digital Wavelet Transform (DWT) preserving the statistical salient features. The lossless NG DWT accomplishes the data compression of "wellness baseline profiles (WBP)" of aging population at homes. For medical monitoring system at home fronts we translate the military experience to dual usage of veterans & civilian alike with the following three requirements: (i) Data Compression: The necessary down sampling reduces the immense amount of data of individual WBP from hours to days and to weeks for primary caretakers in terms of moments, e.g. mean value, variance, etc., without the artifacts caused by FFT arbitrary windowing. (ii) Lossless: our new NG_DWT must preserve the original data sets. (iii) Phase Transition: NG_DWT must capture the critical phase transition of the wellness toward the sickness with simultaneous display of local statistical moments. According to the Nyquist sampling theory, assuming a band-limited wellness physiology, we must sample the WBP at least twice per day since it is changing diurnally and seasonally. Since NG_DWT, like the 2 nd Gen, is lossless, we can reconstruct the original time series for the physicians' second looks. This technique of NG_DWT can also help stock market day-traders monitoring the volatility of multiple portfolios without artificial horizon artifacts.

  10. GenDecoder: genetic code prediction for metazoan mitochondria.

    PubMed

    Abascal, Federico; Zardoya, Rafael; Posada, David

    2006-07-01

    Although the majority of the organisms use the same genetic code to translate DNA, several variants have been described in a wide range of organisms, both in nuclear and organellar systems, many of them corresponding to metazoan mitochondria. These variants are usually found by comparative sequence analyses, either conducted manually or with the computer. Basically, when a particular codon in a query-species is linked to positions for which a specific amino acid is consistently found in other species, then that particular codon is expected to translate as that specific amino acid. Importantly, and despite the simplicity of this approach, there are no available tools to help predicting the genetic code of an organism. We present here GenDecoder, a web server for the characterization and prediction of mitochondrial genetic codes in animals. The analysis of automatic predictions for 681 metazoans aimed us to study some properties of the comparative method, in particular, the relationship among sequence conservation, taxonomic sampling and reliability of assignments. Overall, the method is highly precise (99%), although highly divergent organisms such as platyhelminths are more problematic. The GenDecoder web server is freely available from http://darwin.uvigo.es/software/gendecoder.html.

  11. Genetic code prediction for metazoan mitochondria with GenDecoder.

    PubMed

    Abascal, Federico; Zardoya, Rafael; Posada, David

    2009-01-01

    There is a standard genetic code that is used by most organisms, but exceptions exist in which particular codons are translated with a different meaning, i.e., as a different amino acid. The characterization of the genetic code of an organism is hence a key step for properly analyzing and translating its protein-coding genes. Such characterization is particularly important in the case of metazoan mitochondrial genomes for two reasons: first, many variant codes occur in them and second, mitochondrial data is frequently used for evolutionary studies. Variant codes are usually found by comparative sequence analyses. Given a protein alignment, if a particular codon for a given species occurs at positions in which a particular amino acid is frequently found in other species, then the most likely hypothesis is that the codon is translated as that particular amino acid in that species. Previously, we have shown that this method can be very reliable provided that enough taxa and positions are included in the comparisons and have implemented it in the web-ser GenDecoder (http://darwin.uvigo.es/software/gendecoder.html). In this chapter we describe the rationale of the method used by GenDecoder and its usage through worked examples, highlighting the potential problems that can arise during the analysis.

  12. Max Phase Materials And Coatings For High Temperature Heat Transfer Applications

    SciTech Connect

    Martinez-Rodriguez, M.; Garcia-Diaz, B.; Olson, L.; Fuentes, R.; Sindelar, R.

    2015-10-19

    Molten salts have been used as heat transfer fluids in a variety of applications within proposed Gen IV nuclear designs and in advanced power system such as Concentrating Solar Power (CSP). However, operating at elevated temperatures can cause corrosion in many materials. This work developed coating technologies for MAX phase materials on Haynes-230 and characterized the corrosion of the coatings in the presence of commercial MgCl2-KCl molten salt. Cold spraying of Ti2AlC and physical vapor deposition (PVD) of Ti2AlC or Zr2AlC were tested to determine the most effective form of coating MAX phases on structural substrates. Corrosion testing at 850°C for 100 hrs showed that 3.9 μm Ti2AlC by PVD was slightly protective while 117 μm Ti2AlC by cold spray and 3.6 μm Zr2AlC by PVD were completely protective. None of the tests showed decomposition of the coating (Ti or Zr) into the salt

  13. Synthesis of refractory materials

    DOEpatents

    Holt, Joseph B.

    1984-01-01

    Refractory metal nitrides are synthesized during a self-propagating combustion process utilizing a solid source of nitrogren. For this purpose, a metal azide is employed, preferably NaN.sub.3. The azide is combusted with Mg or Ca, and a metal oxide is selected from Groups III-A, IV-A, III-B, IV-B, or a rare earth metal oxide. The mixture of azide, Ca or Mg and metal oxide is heated to the mixture's ignition temperature. At that temperature the mixture is ignited and undergoes self-sustaining combustion until the starter materials are exhausted, producing the metal nitride.

  14. VitisGen on the road: mapping the way to the next generation of grapes

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The USDA-NIFA VitisGen project (Award No. 2011-51181-30635) aims to optimize grape cultivar improvement through the integration of grape breeding, cutting edge genomics technology, precision phenotyping, socioeconomic research, and extension. VitisGen is a five-year project involving 25 co-PIs at 11...

  15. 76 FR 3931 - Second Meeting RTCA NextGen Advisory Committee (NAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-21

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Second Meeting RTCA NextGen Advisory Committee (NAC) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: RTCA NextGen Advisory Committee (NAC). SUMMARY: The FAA...

  16. CottonGen: a genomics, genetics and breeding database for cotton research

    Technology Transfer Automated Retrieval System (TEKTRAN)

    CottonGen (http://www.cottongen.org) is a curated and integrated web-based relational database providing access to publicly available genomic, genetic and breeding data for cotton. CottonGen supercedes CottonDB and the Cotton Marker Database, with enhanced tools for easier data sharing, mining, vis...

  17. Annotations on Mexico's WISC-IV: a validity study.

    PubMed

    Fina, Anthony D; Sánchez-Escobedo, Pedro; Hollingworth, Liz

    2012-01-01

    This project seeks to provide evidence on the internal structure of the Escala Wechsler de Inteligencia para Niños-IV (EWIN-IV; Wechsler, 2007a ) through a confirmatory factor analysis and intercorrelational study. Also provided is information on the adaptation process and other sources of validity evidence in support of the EWIN-IV norms. The standardization data for the EWIN-IV were used for all analyses. The factor loadings and correlational patterns found on the EWIN-IV are comparable to those seen in the American versions of the test. The proposed factor and scoring structure of the EWIN-IV was supported.

  18. Origin and course of the coronary arteries in normal mice and in iv/iv mice

    PubMed Central

    ICARDO, JOSÉ M.; COLVEE, ELVIRA

    2001-01-01

    This paper reports on the origin and distribution of the coronary arteries in normal mice and in mice of the iv/iv strain, which show situs inversus and heterotaxia. The coronary arteries were studied by direct observation of the aortic sinuses with the scanning electron microscope, and by examination of vascular corrosion casts. In the normal mouse, the left and right coronaries (LC, RC) arise from the respective Valsalva sinus and course along the ventricular borders to reach the heart apex. Along this course the coronary arteries give off small branches at perpendicular or acute angles to supply the ventricles. The ventricular septum is supplied by the septal artery, which arises as a main branch from the right coronary. Conus arteries arise from the main coronary trunks, from the septal artery and/or directly from the Valsalva sinus. The vascular casts demonstrate the presence of intercoronary anastomoses. The origin of the coronary arteries was found to be abnormal in 84% of the iv/iv mice. These anomalies included double origin, high take-off, slit-like openings and the presence of a single coronary orifice. These anomalies occurred singly or in any combination, and were independent of heart situs. The septal artery originated from RC in most cases of situs solitus but originated predominantly from LC in situs inversus hearts. Except for this anomalous origin no statistical correlation was found between the coronary anomalies and heart situs or a particular mode of heterotaxia. The coronary anomalies observed in the iv/iv mice are similar to those found in human hearts. Most coronary anomalies appear to be due to defective connections between the aortic root and the developing coronaries. iv/iv mice may therefore constitute a good model to study the development of similar anomalies in the human heart. PMID:11693308

  19. Assessment of Response to Lithium Maintenance Treatment in Bipolar Disorder: A Consortium on Lithium Genetics (ConLiGen) Report

    PubMed Central

    Manchia, Mirko; Adli, Mazda; Akula, Nirmala; Ardau, Raffaella; Aubry, Jean-Michel; Backlund, Lena; Banzato, Claudio EM.; Baune, Bernhard T.; Bellivier, Frank; Bengesser, Susanne; Biernacka, Joanna M.; Brichant-Petitjean, Clara; Bui, Elise; Calkin, Cynthia V.; Cheng, Andrew Tai Ann; Chillotti, Caterina; Cichon, Sven; Clark, Scott; Czerski, Piotr M.; Dantas, Clarissa; Zompo, Maria Del; DePaulo, J. Raymond; Detera-Wadleigh, Sevilla D.; Etain, Bruno; Falkai, Peter; Frisén, Louise; Frye, Mark A.; Fullerton, Jan; Gard, Sébastien; Garnham, Julie; Goes, Fernando S.; Grof, Paul; Gruber, Oliver; Hashimoto, Ryota; Hauser, Joanna; Heilbronner, Urs; Hoban, Rebecca; Hou, Liping; Jamain, Stéphane; Kahn, Jean-Pierre; Kassem, Layla; Kato, Tadafumi; Kelsoe, John R.; Kittel-Schneider, Sarah; Kliwicki, Sebastian; Kuo, Po-Hsiu; Kusumi, Ichiro; Laje, Gonzalo; Lavebratt, Catharina; Leboyer, Marion; Leckband, Susan G.; López Jaramillo, Carlos A.; Maj, Mario; Malafosse, Alain; Martinsson, Lina; Masui, Takuya; Mitchell, Philip B.; Mondimore, Frank; Monteleone, Palmiero; Nallet, Audrey; Neuner, Maria; Novák, Tomás; O’Donovan, Claire; Ösby, Urban; Ozaki, Norio; Perlis, Roy H.; Pfennig, Andrea; Potash, James B.; Reich-Erkelenz, Daniela; Reif, Andreas; Reininghaus, Eva; Richardson, Sara; Rouleau, Guy A.; Rybakowski, Janusz K.; Schalling, Martin; Schofield, Peter R.; Schubert, Oliver K.; Schweizer, Barbara; Seemüller, Florian; Grigoroiu-Serbanescu, Maria; Severino, Giovanni; Seymour, Lisa R.; Slaney, Claire; Smoller, Jordan W.; Squassina, Alessio; Stamm, Thomas; Steele, Jo; Stopkova, Pavla; Tighe, Sarah K.; Tortorella, Alfonso; Turecki, Gustavo; Wray, Naomi R.; Wright, Adam; Zandi, Peter P.; Zilles, David; Bauer, Michael; Rietschel, Marcella; McMahon, Francis J.

    2013-01-01

    Objective The assessment of response to lithium maintenance treatment in bipolar disorder (BD) is complicated by variable length of treatment, unpredictable clinical course, and often inconsistent compliance. Prospective and retrospective methods of assessment of lithium response have been proposed in the literature. In this study we report the key phenotypic measures of the “Retrospective Criteria of Long-Term Treatment Response in Research Subjects with Bipolar Disorder” scale currently used in the Consortium on Lithium Genetics (ConLiGen) study. Materials and Methods Twenty-nine ConLiGen sites took part in a two-stage case-vignette rating procedure to examine inter-rater agreement [Kappa (κ)] and reliability [intra-class correlation coefficient (ICC)] of lithium response. Annotated first-round vignettes and rating guidelines were circulated to expert research clinicians for training purposes between the two stages. Further, we analyzed the distributional properties of the treatment response scores available for 1,308 patients using mixture modeling. Results Substantial and moderate agreement was shown across sites in the first and second sets of vignettes (κ = 0.66 and κ = 0.54, respectively), without significant improvement from training. However, definition of response using the A score as a quantitative trait and selecting cases with B criteria of 4 or less showed an improvement between the two stages (ICC1 = 0.71 and ICC2 = 0.75, respectively). Mixture modeling of score distribution indicated three subpopulations (full responders, partial responders, non responders). Conclusions We identified two definitions of lithium response, one dichotomous and the other continuous, with moderate to substantial inter-rater agreement and reliability. Accurate phenotypic measurement of lithium response is crucial for the ongoing ConLiGen pharmacogenomic study. PMID:23840348

  20. Impeding 99Tc(IV) mobility in novel waste forms

    PubMed Central

    Lee, Mal-Soon; Um, Wooyong; Wang, Guohui; Kruger, Albert A.; Lukens, Wayne W.; Rousseau, Roger; Glezakou, Vassiliki-Alexandra

    2016-01-01

    Technetium (99Tc) is an abundant, long-lived radioactive fission product whose mobility in the subsurface is largely governed by its oxidation state. Tc immobilization is crucial for radioactive waste management and environmental remediation. Tc(IV) incorporation in spinels has been proposed as a novel method to increase Tc retention in glass waste forms during vitrification. However, experiments under high-temperature and oxic conditions show reoxidation of Tc(IV) to volatile pertechnetate, Tc(VII). Here we examine this problem with ab initio molecular dynamics simulations and propose that, at elevated temperatures, doping with first row transition metal can significantly enhance Tc retention in magnetite in the order Co>Zn>Ni. Experiments with doped spinels at 700 °C provide quantitative confirmation of the theoretical predictions in the same order. This work highlights the power of modern, state-of-the-art simulations to provide essential insights and generate theory-inspired design criteria of complex materials at elevated temperatures. PMID:27357121

  1. Group IV nanotube transistors for next generation ubiquitous computing

    NASA Astrophysics Data System (ADS)

    Fahad, Hossain M.; Hussain, Aftab M.; Sevilla Torres, Galo A.; Banerjee, Sanjay K.; Hussain, Muhammad M.

    2014-06-01

    Evolution in transistor technology from increasingly large power consuming single gate planar devices to energy efficient multiple gate non-planar ultra-narrow (< 20 nm) fins has enhanced the scaling trend to facilitate doubling performance. However, this performance gain happens at the expense of arraying multiple devices (fins) per operation bit, due to their ultra-narrow dimensions (width) originated limited number of charges to induce appreciable amount of drive current. Additionally arraying degrades device off-state leakage and increases short channel characteristics, resulting in reduced chip level energy-efficiency. In this paper, a novel nanotube device (NTFET) topology based on conventional group IV (Si, SiGe) channel materials is discussed. This device utilizes a core/shell dual gate strategy to capitalize on the volume-inversion properties of an ultra-thin (< 10 nm) group IV nanotube channel to minimize leakage and short channel effects while maximizing performance in an area-efficient manner. It is also shown that the NTFET is capable of providing a higher output drive performance per unit chip area than an array of gate-all-around nanowires, while maintaining the leakage and short channel characteristics similar to that of a single gate-all-around nanowire, the latter being the most superior in terms of electrostatic gate control. In the age of big data and the multitude of devices contributing to the internet of things, the NTFET offers a new transistor topology alternative with maximum benefits from performance-energy efficiency-functionality perspective.

  2. Impeding 99Tc(IV) mobility in novel waste forms

    NASA Astrophysics Data System (ADS)

    Lee, Mal-Soon; Um, Wooyong; Wang, Guohui; Kruger, Albert A.; Lukens, Wayne W.; Rousseau, Roger; Glezakou, Vassiliki-Alexandra

    2016-06-01

    Technetium (99Tc) is an abundant, long-lived radioactive fission product whose mobility in the subsurface is largely governed by its oxidation state. Tc immobilization is crucial for radioactive waste management and environmental remediation. Tc(IV) incorporation in spinels has been proposed as a novel method to increase Tc retention in glass waste forms during vitrification. However, experiments under high-temperature and oxic conditions show reoxidation of Tc(IV) to volatile pertechnetate, Tc(VII). Here we examine this problem with ab initio molecular dynamics simulations and propose that, at elevated temperatures, doping with first row transition metal can significantly enhance Tc retention in magnetite in the order Co>Zn>Ni. Experiments with doped spinels at 700 °C provide quantitative confirmation of the theoretical predictions in the same order. This work highlights the power of modern, state-of-the-art simulations to provide essential insights and generate theory-inspired design criteria of complex materials at elevated temperatures.

  3. Impeding (99)Tc(IV) mobility in novel waste forms.

    PubMed

    Lee, Mal-Soon; Um, Wooyong; Wang, Guohui; Kruger, Albert A; Lukens, Wayne W; Rousseau, Roger; Glezakou, Vassiliki-Alexandra

    2016-01-01

    Technetium ((99)Tc) is an abundant, long-lived radioactive fission product whose mobility in the subsurface is largely governed by its oxidation state. Tc immobilization is crucial for radioactive waste management and environmental remediation. Tc(IV) incorporation in spinels has been proposed as a novel method to increase Tc retention in glass waste forms during vitrification. However, experiments under high-temperature and oxic conditions show reoxidation of Tc(IV) to volatile pertechnetate, Tc(VII). Here we examine this problem with ab initio molecular dynamics simulations and propose that, at elevated temperatures, doping with first row transition metal can significantly enhance Tc retention in magnetite in the order Co>Zn>Ni. Experiments with doped spinels at 700 °C provide quantitative confirmation of the theoretical predictions in the same order. This work highlights the power of modern, state-of-the-art simulations to provide essential insights and generate theory-inspired design criteria of complex materials at elevated temperatures. PMID:27357121

  4. Coxiella Type IV Secretion and Cellular Microbiology

    PubMed Central

    Voth, Daniel E.; Heinzen, Robert A.

    2009-01-01

    Summary Coxiella burnetii is a wide spread zoonotic bacterial pathogen that causes human Q fever. In vivo, Coxiella displays a tropism for mononuclear phagocytes where it participates in biogenesis of a lysosome-like replication compartment to conduct its obligate intracellular lifestyle. Coxiella actively regulates multiple events during infection, presumably via proteins with effector functions that are delivered to the host cytosol by a Dot/Icm type IV secretion system. Because the organism is currently refractory to genetic manipulation, Coxiella Dot/Icm substrates have been identified using bioinformatics and Legionella pneumophila as a surrogate type IV delivery system. Functional characterization of the biological activity of these effector proteins will dramatically aid our ability to model Coxiella-host cell interactions. PMID:19144560

  5. Optical and dielectric studies on tin(iv) tungstate nanoparticles

    NASA Astrophysics Data System (ADS)

    B, Beena; S, Manoj

    2015-02-01

    Tin(IV) tungstate nanoparticles in the form of disc were synthesized by a novel chemical coprecipitation method. Surface morphology and particle size of the synthesized materials were analysed using Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). SEM image shows disc like appearance of the nanoparticles. The particle size obtained was found to be ~20nm. Optical absorption for this material arises due to O2p → W5d charge transfer in the tungstate structure. The energy band gap determined using optical absorption spectrum shows that it is a direct band gap semiconductor. The extent of disorder determined using Urbach plot was found to be 0.00176 meV. The material showed intrinsic Photoluminescence around 468nm when excited by UV light of 275nm. The variation of dielectric permittivity in the frequency range 316 Hz to 3.16 MHz was studied. The temperature dependence of dielectric permittivity was also studied in the frequency range 10Hz and 32 MHz. The compound exhibit a high dielectric constant at room temperature (ε1>103) for frequencies 10Hz and (ε1 > 105) for frequencies 3.2×107 Hz. It posses lower dielectric loss ie, ~0.1 at 10 Hz to ~3 at 3.2×107 Hz. The material is very attractive for potential application provides its losses can be minimized.

  6. Zodiacal Dust: Measurements by Mariner IV.

    PubMed

    Alexander, W M; McCracken, C W; Bohn, J L

    1965-09-10

    Data from the Mariner IV dust-particle experiment reveal an increase by a factor of 5 in the flux of interplanetary dust particles as the heliocentric distance from the sun increases. There is a variation in the slope of the cumulative flux-mass distribution, with the steepest slope for the distribution occurring between the planets. No enhancement of the flux in the vicinity of Mars was detected.

  7. The IVS data input to ITRF2014

    NASA Astrophysics Data System (ADS)

    Nothnagel, Axel; Alef, Walter; Amagai, Jun; Andersen, Per Helge; Andreeva, Tatiana; Artz, Thomas; Bachmann, Sabine; Barache, Christophe; Baudry, Alain; Bauernfeind, Erhard; Baver, Karen; Beaudoin, Christopher; Behrend, Dirk; Bellanger, Antoine; Berdnikov, Anton; Bergman, Per; Bernhart, Simone; Bertarini, Alessandra; Bianco, Giuseppe; Bielmaier, Ewald; Boboltz, David; Böhm, Johannes; Böhm, Sigrid; Boer, Armin; Bolotin, Sergei; Bougeard, Mireille; Bourda, Geraldine; Buttaccio, Salvo; Cannizzaro, Letizia; Cappallo, Roger; Carlson, Brent; Carter, Merri Sue; Charlot, Patrick; Chen, Chenyu; Chen, Maozheng; Cho, Jungho; Clark, Thomas; Collioud, Arnaud; Colomer, Francisco; Colucci, Giuseppe; Combrinck, Ludwig; Conway, John; Corey, Brian; Curtis, Ronald; Dassing, Reiner; Davis, Maria; de-Vicente, Pablo; De Witt, Aletha; Diakov, Alexey; Dickey, John; Diegel, Irv; Doi, Koichiro; Drewes, Hermann; Dube, Maurice; Elgered, Gunnar; Engelhardt, Gerald; Evangelista, Mark; Fan, Qingyuan; Fedotov, Leonid; Fey, Alan; Figueroa, Ricardo; Fukuzaki, Yoshihiro; Gambis, Daniel; Garcia-Espada, Susana; Gaume, Ralph; Gaylard, Michael; Geiger, Nicole; Gipson, John; Gomez, Frank; Gomez-Gonzalez, Jesus; Gordon, David; Govind, Ramesh; Gubanov, Vadim; Gulyaev, Sergei; Haas, Ruediger; Hall, David; Halsig, Sebastian; Hammargren, Roger; Hase, Hayo; Heinkelmann, Robert; Helldner, Leif; Herrera, Cristian; Himwich, Ed; Hobiger, Thomas; Holst, Christoph; Hong, Xiaoyu; Honma, Mareki; Huang, Xinyong; Hugentobler, Urs; Ichikawa, Ryuichi; Iddink, Andreas; Ihde, Johannes; Ilijin, Gennadiy; Ipatov, Alexander; Ipatova, Irina; Ishihara, Misao; Ivanov, D. V.; Jacobs, Chris; Jike, Takaaki; Johansson, Karl-Ake; Johnson, Heidi; Johnston, Kenneth; Ju, Hyunhee; Karasawa, Masao; Kaufmann, Pierre; Kawabata, Ryoji; Kawaguchi, Noriyuki; Kawai, Eiji; Kaydanovsky, Michael; Kharinov, Mikhail; Kobayashi, Hideyuki; Kokado, Kensuke; Kondo, Tetsuro; Korkin, Edward; Koyama, Yasuhiro; Krasna, Hana; Kronschnabl, Gerhard; Kurdubov, Sergey; Kurihara, Shinobu; Kuroda, Jiro; Kwak, Younghee; La Porta, Laura; Labelle, Ruth; Lamb, Doug; Lambert, Sébastien; Langkaas, Line; Lanotte, Roberto; Lavrov, Alexey; Le Bail, Karine; Leek, Judith; Li, Bing; Li, Huihua; Li, Jinling; Liang, Shiguang; Lindqvist, Michael; Liu, Xiang; Loesler, Michael; Long, Jim; Lonsdale, Colin; Lovell, Jim; Lowe, Stephen; Lucena, Antonio; Luzum, Brian; Ma, Chopo; Ma, Jun; Maccaferri, Giuseppe; Machida, Morito; MacMillan, Dan; Madzak, Matthias; Malkin, Zinovy; Manabe, Seiji; Mantovani, Franco; Mardyshkin, Vyacheslav; Marshalov, Dmitry; Mathiassen, Geir; Matsuzaka, Shigeru; McCarthy, Dennis; Melnikov, Alexey; Michailov, Andrey; Miller, Natalia; Mitchell, Donald; Mora-Diaz, Julian Andres; Mueskens, Arno; Mukai, Yasuko; Nanni, Mauro; Natusch, Tim; Negusini, Monia; Neidhardt, Alexander; Nickola, Marisa; Nicolson, George; Niell, Arthur; Nikitin, Pavel; Nilsson, Tobias; Ning, Tong; Nishikawa, Takashi; Noll, Carey; Nozawa, Kentarou; Ogaja, Clement; Oh, Hongjong; Olofsson, Hans; Opseth, Per Erik; Orfei, Sandro; Pacione, Rosa; Pazamickas, Katherine; Petrachenko, William; Pettersson, Lars; Pino, Pedro; Plank, Lucia; Ploetz, Christian; Poirier, Michael; Poutanen, Markku; Qian, Zhihan; Quick, Jonathan; Rahimov, Ismail; Redmond, Jay; Reid, Brett; Reynolds, John; Richter, Bernd; Rioja, Maria; Romero-Wolf, Andres; Ruszczyk, Chester; Salnikov, Alexander; Sarti, Pierguido; Schatz, Raimund; Scherneck, Hans-Georg; Schiavone, Francesco; Schreiber, Ulrich; Schuh, Harald; Schwarz, Walter; Sciarretta, Cecilia; Searle, Anthony; Sekido, Mamoru; Seitz, Manuela; Shao, Minghui; Shibuya, Kazuo; Shu, Fengchun; Sieber, Moritz; Skjaeveland, Asmund; Skurikhina, Elena; Smolentsev, Sergey; Smythe, Dan; Sousa, Don; Sovers, Ojars; Stanford, Laura; Stanghellini, Carlo; Steppe, Alan; Strand, Rich; Sun, Jing; Surkis, Igor; Takashima, Kazuhiro; Takefuji, Kazuhiro; Takiguchi, Hiroshi; Tamura, Yoshiaki; Tanabe, Tadashi; Tanir, Emine; Tao, An; Tateyama, Claudio; Teke, Kamil; Thomas, Cynthia; Thorandt, Volkmar; Thornton, Bruce; Tierno Ros, Claudia; Titov, Oleg; Titus, Mike; Tomasi, Paolo; Tornatore, Vincenza; Trigilio, Corrado; Trofimov, Dmitriy; Tsutsumi, Masanori; Tuccari, Gino; Tzioumis, Tasso; Ujihara, Hideki; Ullrich, Dieter; Uunila, Minttu; Venturi, Tiziana; Vespe, Francesco; Vityazev, Veniamin; Volvach, Alexandr; Vytnov, Alexander; Wang, Guangli; Wang, Jinqing; Wang, Lingling; Wang, Na; Wang, Shiqiang; Wei, Wenren; Weston, Stuart; Whitney, Alan; Wojdziak, Reiner; Yatskiv, Yaroslav; Yang, Wenjun; Ye, Shuhua; Yi, Sangoh; Yusup, Aili; Zapata, Octavio; Zeitlhoefler, Reinhard; Zhang, Hua; Zhang, Ming; Zhang, Xiuzhong; Zhao, Rongbing; Zheng, Weimin; Zhou, Ruixian; Zubko, Nataliya

    2015-01-01

    Very Long Baseline Interferometry (VLBI) is a primary space-geodetic technique for determining precise coordinates on the Earth, for monitoring the variable Earth rotation and orientation with highest precision, and for deriving many other parameters of the Earth system. The International VLBI Service for Geodesy and Astrometry (IVS, http://ivscc.gsfc.nasa.gov/) is a service of the International Association of Geodesy (IAG) and the International Astronomical Union (IAU). The datasets published here are the results of individual Very Long Baseline Interferometry (VLBI) sessions in the form of normal equations in SINEX 2.0 format (http://www.iers.org/IERS/EN/Organization/AnalysisCoordinator/SinexFormat/sinex.html, the SINEX 2.0 description is attached as pdf) provided by IVS as the input for the next release of the International Terrestrial Reference System (ITRF): ITRF2014. This is a new version of the ITRF2008 release (Bockmann et al., 2009). For each session/ file, the normal equation systems contain elements for the coordinate components of all stations having participated in the respective session as well as for the Earth orientation parameters (x-pole, y-pole, UT1 and its time derivatives plus offset to the IAU2006 precession-nutation components dX, dY (https://www.iau.org/static/resolutions/IAU2006_Resol1.pdf). The terrestrial part is free of datum. The data sets are the result of a weighted combination of the input of several IVS Analysis Centers. The IVS contribution for ITRF2014 is described in Bachmann et al (2015), Schuh and Behrend (2012) provide a general overview on the VLBI method, details on the internal data handling can be found at Behrend (2013).

  8. Genome Sequencing and Analysis Conference IV

    SciTech Connect

    Not Available

    1993-12-31

    J. Craig Venter and C. Thomas Caskey co-chaired Genome Sequencing and Analysis Conference IV held at Hilton Head, South Carolina from September 26--30, 1992. Venter opened the conference by noting that approximately 400 researchers from 16 nations were present four times as many participants as at Genome Sequencing Conference I in 1989. Venter also introduced the Data Fair, a new component of the conference allowing exchange and on-site computer analysis of unpublished sequence data.

  9. In vitro removal of actinide (IV) ions

    DOEpatents

    Weitl, Frederick L.; Raymond, Kenneth N.

    1982-01-01

    A compound of the formula: ##STR1## wherein X is hydrogen or a conventional electron-withdrawing group, particularly --SO.sub.3 H or a salt thereof; n is 2, 3, or 4; m is 2, 3, or 4; and p is 2 or 3. The present compounds are useful as specific sequestering agents for actinide (IV) ions. Also described is a method for the 2,3-dihydroxybenzamidation of azaalkanes.

  10. Growth requirements and fermentation products of Fusobacterium prausnitzii, and a proposal to reclassify it as Faecalibacterium prausnitzii gen. nov., comb. nov.

    PubMed

    Duncan, Sylvia H; Hold, Georgina L; Harmsen, Hermie J M; Stewart, Colin S; Flint, Harry J

    2002-11-01

    Two newly isolated strains of obligately anaerobic bacteria from human faeces are shown here to be related to Fusobacterium prausnitzii, which is regarded as one of the most abundant colonizers of the human colon. These strains, along with Fusobacterium prausnitzii ATCC 27768(T) and 27766, are non-motile and produce butyrate, formate and lactate, but not hydrogen as fermentation products. A new finding is that all four strains produce D-lactate, but not L-lactate. The strains have a requirement for acetate in the growth medium and this may account for the previously reported requirement for rumen fluid. The DNA G+C content of the four strains is 47-57 mol%. Together with phylogenetic analysis based on 16S rRNA sequencing, this establishes that Fusobacterium prausnitzii strains are only distantly related to Fusobacterium sensu stricto and are more closely related to members of Clostridium cluster IV (the Clostridium leptum group). It is proposed that a new genus, Faecalibacterium gen. nov. be created; this genus should include Faecalibacterium prausnitzii gen. nov., comb. nov. ATCC 27768(T) (= NCIMB 13872(T)) (formerly Fusobacterium prausnitzii) as the type species together with ATCC 27766 and the newly isolated strains A2-165 and L2-6.

  11. Type IV Pilin Proteins: Versatile Molecular Modules

    PubMed Central

    Giltner, Carmen L.; Nguyen, Ylan

    2012-01-01

    Summary: Type IV pili (T4P) are multifunctional protein fibers produced on the surfaces of a wide variety of bacteria and archaea. The major subunit of T4P is the type IV pilin, and structurally related proteins are found as components of the type II secretion (T2S) system, where they are called pseudopilins; of DNA uptake/competence systems in both Gram-negative and Gram-positive species; and of flagella, pili, and sugar-binding systems in the archaea. This broad distribution of a single protein family implies both a common evolutionary origin and a highly adaptable functional plan. The type IV pilin is a remarkably versatile architectural module that has been adopted widely for a variety of functions, including motility, attachment to chemically diverse surfaces, electrical conductance, acquisition of DNA, and secretion of a broad range of structurally distinct protein substrates. In this review, we consider recent advances in this research area, from structural revelations to insights into diversity, posttranslational modifications, regulation, and function. PMID:23204365

  12. Expanding the ecological validity of WAIS-IV and WMS-IV with the Texas functional living scale.

    PubMed

    Whipple Drozdick, Lisa; Munro Cullum, C

    2011-06-01

    Assessment of functional status is an important aspect of clinical evaluation. As part of the standardization of the Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV) and Wechsler Memory Scale-Fourth Edition (WMS-IV), participants completed the Texas Functional Living Scale (TFLS), a measure of Instrumental Activities of Daily Living. The relationships between TFLS and WAIS-IV and WMS-IV were examined in both normally developing and clinical samples. In general, the highest correlations were between TFLS and measures of general cognitive ability (WAIS-IV FSIQ [Full Scale IQ] and GAI [General Ability Index]) and working memory (WAIS-IV WMI [Working Memory Index] and WMS-IV VWMI [Visual Working Memory Index]). Across the clinical populations, working memory subtests were generally strongly related to TFLS performance, although this relationship was more consistent with WAIS-IV than WMS-IV. Contrast scaled scores are presented for the TFLS based on WAIS-IV or WMS-IV performance. These scores allow the evaluation of functional abilities within the context of cognitive and memory ability, enhancing and expanding the utility of the WAIS-IV and WMS-IV.

  13. Density diagnostics derived from the O iv and S iv intercombination lines observed by IRIS

    NASA Astrophysics Data System (ADS)

    Polito, V.; Del Zanna, G.; Dudík, J.; Mason, H. E.; Giunta, A.; Reeves, K. K.

    2016-10-01

    The intensity of the O iv 2s2 2p 2P-2s2p24P and S iv 3 s2 3p 2P-3s 3p24 P intercombination lines around 1400 Å observed with the Interface Region Imaging Spectrograph (IRIS) provide a useful tool to diagnose the electron number density (Ne) in the solar transition region plasma. We measure the electron number density in a variety of solar features observed by IRIS, including an active region (AR) loop, plage and brightening, and the ribbon of the 22-June-2015 M 6.5 class flare. By using the emissivity ratios of O iv and S iv lines, we find that our observations are consistent with the emitting plasma being near isothermal (logT[K] ≈ 5) and iso-density (Ne ≈ 1010.6 cm-3) in the AR loop. Moreover, high electron number densities (Ne ≈ 1013 cm-3) are obtained during the impulsive phase of the flare by using the S iv line ratio. We note that the S iv lines provide a higher range of density sensitivity than the O iv lines. Finally, we investigate the effects of high densities (Ne ≳ 1011 cm-3) on the ionization balance. In particular, the fractional ion abundances are found to be shifted towards lower temperatures for high densities compared to the low density case. We also explored the effects of a non-Maxwellian electron distribution on our diagnostic method. The movie associated to Fig. 3 is available at http://www.aanda.org

  14. How Gen Y and Boomers will reshape your agenda.

    PubMed

    Hewlett, Sylvia Ann; Sherbin, Laura; Sumberg, Karen

    2009-01-01

    When it comes to workplace preferences, Generation Y workers closely resemble Baby Boomers. Because these two huge cohorts now coexist in the workforce, their shared values will hold sway in the companies that hire them. The authors, from the Center for Work-Life Policy, conducted two large-scale surveys that reveal those values. Gen Ys and Boomers are eager to contribute to positive social change, and they seek out workplaces where they can do that. They expect flexibility and the option to work remotely, but they also want to connect deeply with colleagues. They believe in employer loyalty but desire to embark on learning odysseys. Innovative firms are responding by crafting reward packages that benefit both generations of workers--and their employers.

  15. Commissioning and Performance Analysis of WhisperGen Stirling Engine

    NASA Astrophysics Data System (ADS)

    Pradip, Prashant Kaliram

    Stirling engine based cogeneration systems have potential to reduce energy consumption and greenhouse gas emission, due to their high cogeneration efficiency and emission control due to steady external combustion. To date, most studies on this unit have focused on performance based on both experimentation and computer models, and lack experimental data for diversified operating ranges. This thesis starts with the commissioning of a WhisperGen Stirling engine with components and instrumentation to evaluate power and thermal performance of the system. Next, a parametric study on primary engine variables, including air, diesel, and coolant flowrate and temperature were carried out to further understand their effect on engine power and efficiency. Then, this trend was validated with the thermodynamic model developed for the energy analysis of a Stirling cycle. Finally, the energy balance of the Stirling engine was compared without and with heat recovery from the engine block and the combustion chamber exhaust.

  16. Clinical Application of Antenatal Genetic Diagnosis of Osteogenesis Imperfecta Type IV

    PubMed Central

    Yuan, Jing; Li, Song; Xu, YeYe; Cong, Lin

    2015-01-01

    Background Clinical analysis and genetic testing of a family with osteogenesis imperfecta type IV were conducted, aiming to discuss antenatal genetic diagnosis of osteogenesis imperfecta type IV. Material/Methods Preliminary genotyping was performed based on clinical characteristics of the family members and then high-throughput sequencing was applied to rapidly and accurately detect the changes in candidate genes. Results Genetic testing of the III5 fetus and other family members revealed missense mutation in c.2746G>A, pGly916Arg in COL1A2 gene coding region and missense and synonymous mutation in COL1A1 gene coding region. Conclusions Application of antenatal genetic diagnosis provides fast and accurate genetic counseling and eugenics suggestions for patients with osteogenesis imperfecta type IV and their families. PMID:25835785

  17. Surgical decision making for stage IV adult acquired flatfoot disorder.

    PubMed

    Peterson, Kyle S; Hyer, Christopher F

    2014-07-01

    Adult acquired flatfoot deformity is a debilitating musculoskeletal condition affecting the lower extremity. Posterior tibial tendon dysfunction (PTTD) is the primary etiology for the development of a flatfoot deformity in an adult. PTTD is classified into 4 stages (with stage IV subdivided into stage IV-A and IV-B). This classification is described in detail in this article.

  18. Surgical decision making for stage IV adult acquired flatfoot disorder.

    PubMed

    Peterson, Kyle S; Hyer, Christopher F

    2014-07-01

    Adult acquired flatfoot deformity is a debilitating musculoskeletal condition affecting the lower extremity. Posterior tibial tendon dysfunction (PTTD) is the primary etiology for the development of a flatfoot deformity in an adult. PTTD is classified into 4 stages (with stage IV subdivided into stage IV-A and IV-B). This classification is described in detail in this article. PMID:24980933

  19. 40 CFR Appendix IV to Part 600 - Reserved

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Reserved IV Appendix IV to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Appendix IV to Part 600...

  20. 29 CFR 4022.63 - Estimated title IV benefit.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Estimated title IV benefit. 4022.63 Section 4022.63 Labor... PAYABLE IN TERMINATED SINGLE-EMPLOYER PLANS Benefit Reductions in Terminating Plans § 4022.63 Estimated... administrator shall determine each participant's estimated title IV benefit. The estimated title IV...

  1. 78 FR 45592 - DeltaPoint Capital IV, LP;

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-29

    ... ADMINISTRATION DeltaPoint Capital IV, LP; Notice Seeking Exemption Under Section 312 of the Small Business Investment Act, Conflicts of Interest Notice is hereby given that DeltaPoint Capital IV, L.P., 45 East Avenue... Business Administration (``SBA'') Rules and Regulations (13 CFR 107.730). DeltaPoint Capital IV,...

  2. IV-VI semiconductor lasers for gas phase biomarker detection

    NASA Astrophysics Data System (ADS)

    McCann, Patrick; Namjou, Khosrow; Roller, Chad; McMillen, Gina; Kamat, Pratyuma

    2007-09-01

    A promising absorption spectroscopy application for mid-IR lasers is exhaled breath analysis where sensitive, selective, and speedy measurement of small gas phase biomarker molecules can be used to diagnose disease and monitor therapies. Many molecules such as nitric oxide, ethane, formaldehyde, acetaldehyde, acetone, carbonyl sulfide, and carbon disulfide have been connected to diseases or conditions such as asthma, oxidative stress, breast cancer, lung cancer, diabetes, organ transplant rejection, and schizophrenia. Measuring these and other, yet to be discovered, biomarker molecules in exhaled breath with mid-IR lasers offers great potential for improving health care since such tests are non-invasive, real-time, and do not require expensive consumables or chemical reagents. Motivated by these potential benefits, mid-IR laser spectrometers equipped with presently available cryogenically-cooled IV-VI lasers mounted in compact Stirling coolers have been developed for clinical research applications. This paper will begin with a description of the development of mid-IR laser instruments and their use in the largest known exhaled breath clinical study ever performed. It will then shift to a description of recent work on the development of new IV-VI semiconductor quantum well materials and laser fabrication methods that offer the promise of low power consumption (i.e. efficient) continuous wave emission at room temperature. Taken together, the demonstration of compelling clinical applications with large market opportunities and the clear identification of a viable pathway to develop low cost mid-IR laser instrumentation can create a renewed focus for future research and development efforts within the mid-IR materials and devices area.

  3. The crystal structure of phase IV of poly(vinylidene fluoride)

    NASA Astrophysics Data System (ADS)

    Bachmann, M.; Gordon, W. L.; Weinhold, S.; Lando, J. B.

    1980-10-01

    The crystal structure of phase IV (polar α or δ phase) poly(vinylidene fluoride) was studied by x-ray diffraction. Oriented phase IV was obtained by orienting phase II (α phase) and then corona poling at approximately 2 MV/cm. The resulting material is a mixture of phases I, II, and IV. Infrared spectra indicate that phase IV has the same chain conformation (TGTG') as phase II. The reflections of phase IV can be indexed to an orthorhombic unit cell with lattice constants similar to the phase II lattice constants, a=0.496 nm, b=0.964 nm, and c (chain axis)=0.462 nm. There are two chains in this unit cell. The two chains pack with the chain dipole moments parallel. Three different ways of packing the chains were investigated: both chains up, one up and one down, and a statistical up-down packing. It was found that to within a 97% confidence level, the chains pack with a statistical up-down packing.

  4. A spectrophotometric study of cerium IV and chromium VI species in nuclear fuel reprocessing process streams

    NASA Astrophysics Data System (ADS)

    Nickson, I. D.; Boxall, C.; Jackson, A.; Whillock, G. O. H.

    2010-03-01

    Nuclear fuel reprocessing schemes such as PUREX and UREX utilise HNO3 media. An understanding of the corrosion of process engineering materials such as stainless steel in such media is a major concern for the nuclear industry. Two key species are cerium and chromium which, as Ce(IV), Cr(VI), may act as corrosion accelerants. An on-line analytical technique for these quantities would be useful for determining the relationship between corrosion rate and [Ce(IV)] and [Cr(VI)]. Consequently, a strategy for simultaneous quantification of Ce(IV), Cr(VI) and Cr(III) in the presence of other ions found in average burn-up Magnox / PWR fuel reprocessing stream (Fe, Mg, Nd, Al) is being developed. This involves simultaneous UV-vis absorbance measurement at 620, 540, 450 nm, wavelengths where Ce and Cr absorb but other ions do not. Mixed solutions of Cr(VI) and Ce(IV) are found to present higher absorbance values at 540 nm than those predicted from absorbances recorded from single component solutions of those ions. This is attributed to the formation of a 3:1 Cr(VI)-Ce(IV) complex and we report on the complexation and UV-visible spectrophotometric characteristics of this species. To the best of our knowledge this is the first experimental study of this complex in aqueous nitric acid solution systems.

  5. Few-layer III-VI and IV-VI 2D semiconductor transistors

    NASA Astrophysics Data System (ADS)

    Sucharitakul, Sukrit; Liu, Mei; Kumar, Rajesh; Sankar, Raman; Chou, Fang C.; Chen, Yit-Tsong; Gao, Xuan

    Since the discovery of atomically thin graphene, a large variety of exfoliable 2D materials have been thoroughly explored for their exotic transport behavior and promises in technological breakthroughs. While most attention on 2D materials beyond graphene is focused on transition metal-dichalcogenides, relatively less attention is paid to layered III-VI and IV-VI semiconductors such as InSe, SnSe etc which bear stronger potential as 2D materials with high electron mobility or thermoelectric figure of merit. We will discuss our recent work on few-layer InSe 2D field effect transistors which exhibit carrier mobility approaching 1000 cm2/Vs and ON-OFF ratio exceeding 107 at room temperature. In addition, the fabrication and device performance of transistors made of mechanically exfoliated multilayer IV-VI semiconductor SnSe and SnSe2 will be discussed.

  6. Annotated Bibliography of Multi-Ethnic Curriculum Materials.

    ERIC Educational Resources Information Center

    Nebraska State Dept. of Education, Lincoln. Div. of Instructional Services.

    This annotated bibliography of multiethnic curriculum materials is distributed by the Title IV Equal Educational Opportunity Project and funded under the Civil Rights Act of 1964. All materials listed are available from the Nebraska Title IV Equal Educational Opportunity Project. Each entry includes the title, author, editor or compiler, copyright…

  7. Mutation and association analysis of GEN1 in breast cancer susceptibility.

    PubMed

    Turnbull, Clare; Hines, Sarah; Renwick, Anthony; Hughes, Deborah; Pernet, David; Elliott, Anna; Seal, Sheila; Warren-Perry, Margaret; Gareth Evans, D; Eccles, Diana; Stratton, Michael R; Rahman, Nazneen

    2010-11-01

    GEN1 was recently identified as a key Holliday junction resolvase involved in homologous recombination. Somatic truncating GEN1 mutations have been reported in two breast cancers. Together these data led to the proposition that GEN1 is a breast cancer predisposition gene. In this article we have formally investigated this hypothesis. We performed full-gene mutational analysis of GEN1 in 176 BRCA1/2-negative familial breast cancer samples and 159 controls. We genotyped six SNPs tagging the 30 common variants in the transcribed region of GEN1 in 3,750 breast cancer cases and 4,907 controls. Mutation analysis revealed one truncating variant, c.2515_2519delAAGTT, which was present in 4% of cases and 4% of controls. We identified control individuals homozygous for the deletion, demonstrating that the last 69 amino acids of GEN1 are dispensable for its function. We identified 17 other variants, but their frequency did not significantly differ between cases and controls. Analysis of 3,750 breast cancer cases and 4,907 controls demonstrated no evidence of significant association with breast cancer for six SNPs tagging the 30 common GEN1 variants. These data indicate that although it also plays a key role in double-strand DNA break repair, GEN1 does not make an appreciable contribution to breast cancer susceptibility by acting as a high- or intermediate-penetrance breast cancer predisposition gene like BRCA1, BRCA2, CHEK2, ATM, BRIP1 and PALB2 and that common GEN1 variants do not act as low-penetrance susceptibility alleles analogous to SNPs in FGFR2. Furthermore, our analyses demonstrate the importance of undertaking appropriate genetic investigations, typically full gene screening in cases and controls together with large-scale case-control association analyses, to evaluate the contribution of genes to cancer susceptibility. PMID:20512659

  8. Mutation and association analysis of GEN1 in breast cancer susceptibility

    PubMed Central

    Turnbull, Clare; Hines, Sarah; Renwick, Anthony; Hughes, Deborah; Pernet, David; Elliott, Anna; Seal, Sheila; Warren-Perry, Margaret; Evans, D. Gareth; Eccles, Diana; Stratton, Michael R.

    2013-01-01

    GEN1 was recently identified as a key Holliday junction resolvase involved in homologous recombination. Somatic truncating GEN1 mutations have been reported in two breast cancers. Together these data led to the proposition that GEN1 is a breast cancer predisposition gene. In this article we have formally investigated this hypothesis. We performed full-gene mutational analysis of GEN1 in 176 BRCA1/2-negative familial breast cancer samples and 159 controls. We genotyped six SNPs tagging the 30 common variants in the transcribed region of GEN1 in 3,750 breast cancer cases and 4,907 controls. Mutation analysis revealed one truncating variant, c.2515_2519del-AAGTT, which was present in 4% of cases and 4% of controls. We identified control individuals homozygous for the deletion, demonstrating that the last 69 amino acids of GEN1 are dispensable for its function. We identified 17 other variants, but their frequency did not significantly differ between cases and controls. Analysis of 3,750 breast cancer cases and 4,907 controls demonstrated no evidence of significant association with breast cancer for six SNPs tagging the 30 common GEN1 variants. These data indicate that although it also plays a key role in double-strand DNA break repair, GEN1 does not make an appreciable contribution to breast cancer susceptibility by acting as a high- or intermediate-penetrance breast cancer predisposition gene like BRCA1, BRCA2, CHEK2, ATM, BRIP1 and PALB2 and that common GEN1 variants do not act as low-penetrance susceptibility alleles analogous to SNPs in FGFR2. Furthermore, our analyses demonstrate the importance of undertaking appropriate genetic investigations, typically full gene screening in cases and controls together with large-scale case–control association analyses, to evaluate the contribution of genes to cancer susceptibility. PMID:20512659

  9. Deferribacter thermophilus gen. nov., sp. nov., a novel thermophilic manganese- and iron-reducing bacterium isolated from a petroleum reservoir.

    PubMed

    Greene, A C; Patel, B K; Sheehy, A J

    1997-04-01

    A thermophilic anaerobic bacterium, designated strain BMAT (T = type strain), was isolated from the production water of Beatrice oil field in the North Sea (United Kingdom). The cells were straight to bent rods (1 to 5 by 0.3 to 0.5 microns) which stained gram negative. Strain BMAT obtained energy from the reduction of manganese (IV), iron(III), and nitrate in the presence of yeast extract, peptone, Casamino Acids, tryptone, hydrogen, malate, acetate, citrate, pyruvate, lactate, succinate, and valerate. The isolate grew optimally at 60 degrees C (temperature range for growth, 50 to 65 degrees C) and in the presence of 2% (wt/vol) NaCl (NaCl range for growth, 0 to 5% [wt/vol]). The DNA base composition was 34 mol% G + C. Phylogenetic analyses of the 16S rRNA gene indicated that strain BMAT is a member of the domain Bacteria. The closest known bacterium is the moderate thermophile Flexistipes sinusarabici (similarity value, 88%). Strain BMAT possesses phenotypic and phylogenetic traits that do not allow its classification as a member of any previously described genus; therefore, we propose that this isolate should be described as a member of a novel species of a new genus, Deferribacter thermophilus gen. nov., sp. nov.

  10. Sciscionella marina gen. nov., sp. nov., a marine actinomycete isolated from a sediment in the northern South China Sea.

    PubMed

    Tian, Xin-Peng; Zhi, Xiao-Yang; Qiu, Yun-Qi; Zhang, Yu-Qin; Tang, Shu-Kun; Xu, Li-Hua; Zhang, Si; Li, Wen-Jun

    2009-02-01

    The taxonomic position of an actinomycete, designated SCSIO 00231(T), isolated from a sediment sample collected from the northern South China Sea, was determined by using a polyphasic approach. The organism formed fragmented substrate hyphae and sparse aerial mycelium on modified ISP 2 medium. Phylogenetic analysis based on the 16S rRNA gene sequence showed that strain SCSIO 00231(T) fell into the family Pseudonocardiaceae, in which it formed a distinct lineage and was loosely associated with Thermocrispum municipale DSM 44069(T), with 93 % similarity. The other closest phylogenetic neighbours were Saccharopolyspora erythraea NRRL 2338(T) (92.6 % similarity) and Amycolatopsis sacchari DSM 44468(T) (93.1 % similarity). The isolate had cell-wall type IV (meso-diaminopimelic acid and whole-cell sugars arabinose, galactose and glucose) and phospholipid type III. The predominant menaquinone was MK-9(H(4)). The G+C content of the genomic DNA was 69 mol%. Based on these data, strain SCSIO 00231(T) can be readily distinguished from previously described organisms and represents a new genus within the family Pseudonocardiaceae. The name Sciscionella gen. nov. is proposed, with the novel species Sciscionella marina sp. nov. The type strain of Sciscionella marina is SCSIO 00231(T) (=KCTC 19433(T) =CCTCC AA208009(T)).

  11. Co-circulation of Peste-des-Petits-Ruminants Virus Asian lineage IV with Lineage II in Nigeria.

    PubMed

    Woma, T Y; Adombi, C M; Yu, D; Qasim, A M M; Sabi, A A; Maurice, N A; Olaiya, O D; Loitsch, A; Bailey, D; Shamaki, D; Dundon, W G; Quan, M

    2016-06-01

    Peste-des-petits-ruminants (PPR), a major small ruminant transboundary animal disease, is endemic in Nigeria. Strains of the causal agent, peste-des-petits-ruminants virus (PPRV), have been differentiated into four genetically distinct lineages based on the partial sequence of the virus nucleoprotein (N) or fusion (F) genes. Peste-des-petits-ruminants virus strains that were identified initially in Africa were grouped into lineages I, II and III and viruses from Asia were classified as lineage IV and referred to as the Asian lineage. Many recent reports indicate that the Asian lineage is now also present in Africa. With this in mind, this study was conducted to reassess the epidemiology of PPRV in Nigeria. A total of 140 clinical samples from 16 sheep and 63 goats with symptoms suggestive of PPR were collected from different states of Nigeria during a four-year period (2010-2013). They were analysed by the amplification of fragments of the N gene. Results for 33 (42%) animals were positive. The phylogenetic analysis of the N gene sequences with those available in GenBank showed that viruses that were detected belong to both lineage II and IV. Based on an analysis of the N gene sequences, the lineage IV isolates grouped into two clades, one being predominant in the north-eastern part of the country and the other found primarily in the southern regions of the country. This study reports the presence of PPRV Asian lineage IV in Nigeria for the first time.

  12. Co-circulation of Peste-des-Petits-Ruminants Virus Asian lineage IV with Lineage II in Nigeria.

    PubMed

    Woma, T Y; Adombi, C M; Yu, D; Qasim, A M M; Sabi, A A; Maurice, N A; Olaiya, O D; Loitsch, A; Bailey, D; Shamaki, D; Dundon, W G; Quan, M

    2016-06-01

    Peste-des-petits-ruminants (PPR), a major small ruminant transboundary animal disease, is endemic in Nigeria. Strains of the causal agent, peste-des-petits-ruminants virus (PPRV), have been differentiated into four genetically distinct lineages based on the partial sequence of the virus nucleoprotein (N) or fusion (F) genes. Peste-des-petits-ruminants virus strains that were identified initially in Africa were grouped into lineages I, II and III and viruses from Asia were classified as lineage IV and referred to as the Asian lineage. Many recent reports indicate that the Asian lineage is now also present in Africa. With this in mind, this study was conducted to reassess the epidemiology of PPRV in Nigeria. A total of 140 clinical samples from 16 sheep and 63 goats with symptoms suggestive of PPR were collected from different states of Nigeria during a four-year period (2010-2013). They were analysed by the amplification of fragments of the N gene. Results for 33 (42%) animals were positive. The phylogenetic analysis of the N gene sequences with those available in GenBank showed that viruses that were detected belong to both lineage II and IV. Based on an analysis of the N gene sequences, the lineage IV isolates grouped into two clades, one being predominant in the north-eastern part of the country and the other found primarily in the southern regions of the country. This study reports the presence of PPRV Asian lineage IV in Nigeria for the first time. PMID:26095085

  13. Multi-PMT Optical Module Designs for IceCube-Gen2

    NASA Astrophysics Data System (ADS)

    Kappes, Alexander

    2016-04-01

    IceCube-Gen2 is the planned next generation neutrino telescope at the South Pole incorporating a high-energy array for neutrino astronomy and a dense array (PINGU) aimed at the determination of the neutrino mass hierarchy. Here, we present alternative designs to IceCube-Gen2's single-PMT baseline optical module which are currently being developed. These designs feature up to 24 smaller photomultipliers and use glass and gel with enhanced UV transparency to increase the number of detected photons and provide additional information. Thereby, they have the potential to significantly enhance the performance of IceCube-Gen2.

  14. Preparation of graphene oxide-manganese dioxide for highly efficient adsorption and separation of Th(IV)/U(VI).

    PubMed

    Pan, Ning; Li, Long; Ding, Jie; Li, Shengke; Wang, Ruibing; Jin, Yongdong; Wang, Xiangke; Xia, Chuanqin

    2016-05-15

    Manganese dioxide decorated graphene oxide (GOM) was prepared via fixation of crystallographic MnO2 (α, γ) on the surface of graphene oxide (GO) and was explored as an adsorbent material for simultaneous removal of thorium/uranium ions from aqueous solutions. In single component systems (Th(IV) or U(VI)), the α-GOM2 (the weight ratio of GO/α-MnO2 of 2) exhibited higher maximum adsorption capacities toward both Th(IV) (497.5mg/g) and U(VI) (185.2 mg/g) than those of GO. In the binary component system (Th(IV)/U(VI)), the saturated adsorption capacity of Th(IV) (408.8 mg/g)/U(VI) (66.8 mg/g) on α-GOM2 was also higher than those on GO. Based on the analysis of various data, it was proposed that the adsorption process may involve four types of molecular interactions including coordination, electrostatic interaction, cation-pi interaction, and Lewis acid-base interaction between Th(IV)/U(VI) and α-GOM2. Finally, the Th(IV)/U(VI) ions on α-GOM2 can be separated by a two-stage desorption process with Na2CO3/EDTA. Those results displayed that the α-GOM2 may be utilized as an potential adsorbent for removing and separating Th(IV)/U(VI) ions from aqueous solutions. PMID:26878706

  15. Impacts of Title IV in Maryland

    SciTech Connect

    Sherwell, J.; Ellis, H.; Corio, L.; Seinfelt, J.

    1995-12-31

    The Maryland Department of Natural Resources` Power Plant Research Program has evaluated the environmental effects of acid deposition on Maryland`s air, land, water (especially the Chesapeake Bay), and human resources since the mid-1980`s. Title IV of the Clean Air Act Amendments of 1990 (CAAA90) has focused much attention on the mandated reductions of nitrogen oxides (NO{sub x}) and sulfur dioxide (SO{sub 2}) to control acid deposition. Baseline data on acidic deposition and air emissions/pollution control for NO{sub x} and SO{sub 2} acquired through PPRP studies have proved useful in evaluating the impacts of Title IV on Maryland power plants and resources. Three example programs are discussed: The first is an evaluation of SO{sub 2} emissions on ecosystems through the use of critical loads--the amount of acid rain that an ecosystem can tolerate without continuing to acidify. Results support the use of broadly based emissions trading scenarios: The second study is an evaluation of the potential for reducing nitrate loading in the Chesapeake Bay by reducing NO{sub x} emissions. Results indicate substantial NO{sub x} emission reductions could offer significant reductions in nitrate deposition to the Bay: The final study is a review of the impacts of Title IV on the Maryland coal industry and the prospects for coal cleaning and advanced combustion technologies. Current results indicate that Maryland coal will meet Phase 2 SO{sub 2} emission standards using advanced combustion techniques, such as fluidized bed technologies, but that additional emissions controls, such as a scrubber would be required in a conventional boiler.

  16. Reconstruction for Type IV Radial Polydactyly.

    PubMed

    Wall, Lindley B; Goldfarb, Charles A

    2015-09-01

    Type IV radial polydactyly represents a thumb with an extra proximal and distal phalanx. Assessment of the thumb for surgical reconstruction includes observing thumb function, evaluating thumb size and stability, and assessing the first web space. Reconstruction includes excision of the smaller thumb, typically the radial thumb, and re-creating thumb stability and alignment by addressing tendon insertion and joint orientation. Although surgical results are satisfying and complications are uncommon, additional surgical intervention may be required over time owing to thumb malalignment or instability.

  17. Onsala Space Observatory: IVS Network Station

    NASA Technical Reports Server (NTRS)

    Haas, Ruediger; Elgered, Gunnar; Loefgren, Johan; Ning, Tong; Scherneck, Hans-Georg

    2013-01-01

    During 2012 we participated in 40 IVS sessions. As in the previous four years, we used the majority of the sessions that involved both Onsala and Tsukuba to do ultra-rapid dUT1 observations together with our colleagues in Tsukuba. We observed one four-station ultra-rapid EOP session together with Tsukuba, Hobart, and HartRAO. We also observed the RadioAstron satellite and several GLONASS satellites using the Onsala 25-m telescope. The highlight in 2012 was that our proposal to the Knut and Alice Wallenberg Foundation to establish a twin-telescope system at Onsala in accordance with the VLBI2010 recommendations was accepted.

  18. Stable kagome lattices from group IV elements

    NASA Astrophysics Data System (ADS)

    Leenaerts, O.; Schoeters, B.; Partoens, B.

    2015-03-01

    A thorough investigation of three-dimensional kagome lattices of group IV elements is performed with first-principles calculations. The investigated kagome lattices of silicon and germanium are found to be of similar stability as the recently proposed carbon kagome lattice. Carbon and silicon kagome lattices are both direct-gap semiconductors but they have qualitatively different electronic band structures. While direct optical transitions between the valence and conduction bands are allowed in the carbon case, no such transitions can be observed for silicon. The kagome lattice of germanium exhibits semimetallic behavior but can be transformed into a semiconductor after compression.

  19. Zirconium(IV)- and hafnium(IV)-catalyzed highly enantioselective epoxidation of homoallylic and bishomoallylic alcohols.

    PubMed

    Li, Zhi; Yamamoto, Hisashi

    2010-06-16

    In this report, zirconium(IV)- and hafnium(IV)-bishydroxamic acid complexes were utilized in the highly enantioselective epoxidation of homoallylic alcohols and bishomoallylic alcohols, which used to be quite difficult substrates for other types of asymmetric epoxidation reactions. The performance of the catalyst was improved by adding polar additive and molecular sieves. For homoallylic alcohols, the reaction could provide epoxy alcohols in up to 83% yield and up to 98% ee, while, for bishomoallylic alcohols, up to 79% yield and 99% ee of epoxy alcohols rather than cyclized tetrahydrofuran compounds could be obtained in most cases.

  20. Alteration of Escherichia coli topoisomerase IV to novobiocin resistance.

    PubMed

    Hardy, Christine D; Cozzarelli, Nicholas R

    2003-03-01

    DNA gyrase and topoisomerase IV (topo IV) are the two essential type II topoisomerases of Escherichia coli. Gyrase is responsible for maintaining negative supercoiling of the bacterial chromosome, whereas topo IV's primary role is in disentangling daughter chromosomes following DNA replication. Coumarins, such as novobiocin, are wide-spectrum antimicrobial agents that primarily interfere with DNA gyrase. In this work we designed an alteration in the ParE subunit of topo IV at a site homologous to that which confers coumarin resistance in gyrase. This parE mutation renders the encoded topo IV approximately 40-fold resistant to inhibition by novobiocin in vitro and imparts a similar resistance to inhibition of topo IV-mediated relaxation of supercoiled DNA in vivo. We conclude that topo IV is a secondary target of novobiocin and that it is very likely to be inhibited by the same mechanism as DNA gyrase.

  1. Report for 2011 from the Bordeaux IVS Analysis Center

    NASA Technical Reports Server (NTRS)

    Charlot, Patrick; Bellanger, Antoine; Bourda, Geraldine; Collioud, Arnaud; Baudry, Alain

    2012-01-01

    This report summarizes the activities of the Bordeaux IVS Analysis Center during the year 2011. The work focused on (i) regular analysis of the IVS-R1 and IVS-R4 sessions with the GINS software package; (ii) systematic VLBI imaging of the RDV sessions and calculation of the corresponding source structure index and compactness values; (iii) imaging of the sources observed during the 2009 International Year of Astronomy IVS observing session; and (iv) continuation of our VLBI observational program to identify optically-bright radio sources suitable for the link with the future Gaia frame. Also of importance is the enhancement of the IVS LiveWeb site which now comprises all IVS sessions back to 2003, allowing one to search past observations for session-specific information (e.g. sources or stations).

  2. Site Environmental Report for Calendar Year 2007. DOE Operations at The Boeing Company, Santa Susana Field Laboratory, Area IV

    SciTech Connect

    Liu, Ning; Rutherford, Phil; Lenox, Art; Blair, Lori; Amar, Ravnesh; Costa, Paul; Galvez, Lydia; Jameson, Blythe; Galvez, Lydia

    2008-09-30

    This Annual Site Environmental Report (ASER) for 2007 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder components. All nuclear work was terminated in 1988; all subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. In May 2007, the D&D operations in Area IV were suspended until DOE completes the SSFL Area IV Environmental Impact Statement (EIS). The environmental monitoring programs were continued throughout the year. Results of the radiological monitoring program for the calendar year 2007 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling. All radioactive wastes are processed for disposal at DOE disposal sites and/or other licensed sites approved by DOE for radioactive waste disposal. No liquid radioactive wastes were released into the environment in 2007.

  3. Kretzoiarctos gen. nov., the oldest member of the giant panda clade.

    PubMed

    Abella, Juan; Alba, David M; Robles, Josep M; Valenciano, Alberto; Rotgers, Cheyenn; Carmona, Raül; Montoya, Plinio; Morales, Jorge

    2012-01-01

    The phylogenetic position of the giant panda, Ailuropoda melanoleuca (Carnivora: Ursidae: Ailuropodinae), has been one of the most hotly debated topics by mammalian biologists and paleontologists during the last century. Based on molecular data, it is currently recognized as a true ursid, sister-taxon of the remaining extant bears, from which it would have diverged by the Early Miocene. However, from a paleobiogeographic and chronological perspective, the origin of the giant panda lineage has remained elusive due to the scarcity of the available Miocene fossil record. Until recently, the genus Ailurarctos from the Late Miocene of China (ca. 8-7 mya) was recognized as the oldest undoubted member of the Ailuropodinae, suggesting that the panda lineage might have originated from an Ursavus ancestor. The role of the purported ailuropodine Agriarctos, from the Miocene of Europe, in the origins of this clade has been generally dismissed due to the paucity of the available material. Here, we describe a new ailuropodine genus, Kretzoiarctos gen. nov., based on remains from two Middle Miocene (ca. 12-11 Ma) Spanish localities. A cladistic analysis of fossil and extant members of the Ursoidea confirms the inclusion of the new genus into the Ailuropodinae. Moreover, Kretzoiarctos precedes in time the previously-known, Late Miocene members of the giant panda clade from Eurasia (Agriarctos and Ailurarctos). The former can be therefore considered the oldest recorded member of the giant panda lineage, which has significant implications for understanding the origins of this clade from a paleobiogeographic viewpoint.

  4. Kretzoiarctos gen. nov., the oldest member of the giant panda clade.

    PubMed

    Abella, Juan; Alba, David M; Robles, Josep M; Valenciano, Alberto; Rotgers, Cheyenn; Carmona, Raül; Montoya, Plinio; Morales, Jorge

    2012-01-01

    The phylogenetic position of the giant panda, Ailuropoda melanoleuca (Carnivora: Ursidae: Ailuropodinae), has been one of the most hotly debated topics by mammalian biologists and paleontologists during the last century. Based on molecular data, it is currently recognized as a true ursid, sister-taxon of the remaining extant bears, from which it would have diverged by the Early Miocene. However, from a paleobiogeographic and chronological perspective, the origin of the giant panda lineage has remained elusive due to the scarcity of the available Miocene fossil record. Until recently, the genus Ailurarctos from the Late Miocene of China (ca. 8-7 mya) was recognized as the oldest undoubted member of the Ailuropodinae, suggesting that the panda lineage might have originated from an Ursavus ancestor. The role of the purported ailuropodine Agriarctos, from the Miocene of Europe, in the origins of this clade has been generally dismissed due to the paucity of the available material. Here, we describe a new ailuropodine genus, Kretzoiarctos gen. nov., based on remains from two Middle Miocene (ca. 12-11 Ma) Spanish localities. A cladistic analysis of fossil and extant members of the Ursoidea confirms the inclusion of the new genus into the Ailuropodinae. Moreover, Kretzoiarctos precedes in time the previously-known, Late Miocene members of the giant panda clade from Eurasia (Agriarctos and Ailurarctos). The former can be therefore considered the oldest recorded member of the giant panda lineage, which has significant implications for understanding the origins of this clade from a paleobiogeographic viewpoint. PMID:23155439

  5. Kretzoiarctos gen. nov., the Oldest Member of the Giant Panda Clade

    PubMed Central

    Abella, Juan; Alba, David M.; Robles, Josep M.; Valenciano, Alberto; Rotgers, Cheyenn; Carmona, Raül; Montoya, Plinio; Morales, Jorge

    2012-01-01

    The phylogenetic position of the giant panda, Ailuropoda melanoleuca (Carnivora: Ursidae: Ailuropodinae), has been one of the most hotly debated topics by mammalian biologists and paleontologists during the last century. Based on molecular data, it is currently recognized as a true ursid, sister-taxon of the remaining extant bears, from which it would have diverged by the Early Miocene. However, from a paleobiogeographic and chronological perspective, the origin of the giant panda lineage has remained elusive due to the scarcity of the available Miocene fossil record. Until recently, the genus Ailurarctos from the Late Miocene of China (ca. 8–7 mya) was recognized as the oldest undoubted member of the Ailuropodinae, suggesting that the panda lineage might have originated from an Ursavus ancestor. The role of the purported ailuropodine Agriarctos, from the Miocene of Europe, in the origins of this clade has been generally dismissed due to the paucity of the available material. Here, we describe a new ailuropodine genus, Kretzoiarctos gen. nov., based on remains from two Middle Miocene (ca. 12–11 Ma) Spanish localities. A cladistic analysis of fossil and extant members of the Ursoidea confirms the inclusion of the new genus into the Ailuropodinae. Moreover, Kretzoiarctos precedes in time the previously-known, Late Miocene members of the giant panda clade from Eurasia (Agriarctos and Ailurarctos). The former can be therefore considered the oldest recorded member of the giant panda lineage, which has significant implications for understanding the origins of this clade from a paleobiogeographic viewpoint. PMID:23155439

  6. Investigating contact toxicity of Geranium and Artemisia essential oils on Bemisia tabaci Gen.

    PubMed Central

    Yarahmadi, Fatemeh; Rajabpour, Ali; Zandi Sohani, Nooshin; Ramezani, Leila

    2013-01-01

    Objective: Sweet potato whitefly, Bemisia tabaci Gen. (B. tabaci), is one of the most important pests of various greenhouse crops in Iran. Nowadays, chemical insecticides are broadly used for control of the pests that causes risk to consumer's health. For the first time, contact toxicity of Pelargonium roseum Andrews and Artemisia sieberi Besser essential oils on B. tabaci and its possible application against the whitefly was evaluated in 2012. Materials and Methods: Essential oil with concentrations of 2500, 1250, 125, and 12 ppm were used. Infested leaves of greenhouse cucumber were treated by mentioned concentrations. After 24 hours, mortality of B. tabaci was recorded and compared after correcting by Abbot's formula. Results: Results showed that all concentrations of the essential oil could significantly reduce population of B. tabaci compared with the control treatment. Phytotoxicity of the treated leaves were recorded after 24, 48, and 72 hours and compared with the control. Concentrations of 2500, 1250, and 125 ppm caused severe phytotoxicity on greenhouse cucumber leaves and therefore are not suitable for greenhouse application. Phytotoxicity of 12 ppm was relatively low. Conclusions: This data implicated suitable protective effects of the essential oils to the pest infestation. Therefore, essential oils distillated from Geranium and Artemisia could be applied to control B. tabaci in greenhouse cucumber at V/V 12 ppm. PMID:25050264

  7. Nicola gen. nov. with redescription of Nicola tetela (Borojevic & Peixinho, 1976) (Porifera: Calcarea: Calcinea: Clathrinida).

    PubMed

    Cóndor-Luján, B; Klautau, M

    2016-04-13

    Guancha tetela was originally described as a species having a peduncle and a skeleton exclusively composed of sagittal triactines. Therefore, according to the most recent phylogeny of Clathrinida, it should be placed in the genus Clathrina. This species was collected on the Northeastern Brazilian coast in 1968 and it was not collected again until 2011 in Curaçao. In this study, we reanalyzed the type material and the new specimens from Curaçao under a morphological-molecular approach. Morphological analysis revealed the presence of tetractines in the skeleton of all the studied specimens, including a slide of the holotype. In the molecular phylogeny G. tetela grouped with genera containing tetractines, but as an independent new lineage, different from all the other genera of Clathrinida. Based on these results, we propose the erection of a new genus, Nicola gen. nov., to include species whose body is composed of tubes without anastomosis nor branches but that run in parallel and coalesce at the apical and basal regions. Moreover, the skeleton is exclusively composed of sagittal triactines and tetractines.

  8. Nicola gen. nov. with redescription of Nicola tetela (Borojevic & Peixinho, 1976) (Porifera: Calcarea: Calcinea: Clathrinida).

    PubMed

    Cóndor-Luján, B; Klautau, M

    2016-01-01

    Guancha tetela was originally described as a species having a peduncle and a skeleton exclusively composed of sagittal triactines. Therefore, according to the most recent phylogeny of Clathrinida, it should be placed in the genus Clathrina. This species was collected on the Northeastern Brazilian coast in 1968 and it was not collected again until 2011 in Curaçao. In this study, we reanalyzed the type material and the new specimens from Curaçao under a morphological-molecular approach. Morphological analysis revealed the presence of tetractines in the skeleton of all the studied specimens, including a slide of the holotype. In the molecular phylogeny G. tetela grouped with genera containing tetractines, but as an independent new lineage, different from all the other genera of Clathrinida. Based on these results, we propose the erection of a new genus, Nicola gen. nov., to include species whose body is composed of tubes without anastomosis nor branches but that run in parallel and coalesce at the apical and basal regions. Moreover, the skeleton is exclusively composed of sagittal triactines and tetractines. PMID:27394730

  9. A new captorhinid reptile, Gansurhinus qingtoushanensis, gen. et sp. nov., from the Permian of China.

    PubMed

    Reisz, Robert R; Liu, Jun; Li, Jin-Ling; Müller, Johannes

    2011-05-01

    Captorhinids, a clade of Paleozoic reptiles, are represented by a rich fossil record that extends from the Late Carboniferous into the Late Permian. Representatives of this clade dispersed from the equatorial regions of Laurasia into the temperate regions of Pangea during the Middle and Late Permian. This rich fossil record shows that there was an evolutionary trend from faunivorous to omnivorous and herbivorous feeding habits within this clade. The discovery of well-preserved captorhinid materials in the Middle Permian of China allows us to determine that the new taxon, Gansurhinus qingtoushanensis, gen. et sp. nov, is a member of Moradisaurinae, a clade of captorhinids with multiple tooth rows arranged in parallel. The presence of this moradisaurine in the Middle Permian of south central Asia leads us to suggest that paleogeographic changes during the Permian, with part of what is today China becoming a large peninsula of Pangea, allowed these early reptiles as well as other terrestrial vertebrates to extend their geographic ranges to this region of the Late Paleozoic supercontinent.

  10. Characterization of Romboutsia ilealis gen. nov., sp. nov., isolated from the gastro-intestinal tract of a rat, and proposal for the reclassification of five closely related members of the genus Clostridium into the genera Romboutsia gen. nov., Intestinibacter gen. nov., Terrisporobacter gen. nov. and Asaccharospora gen. nov.

    PubMed

    Gerritsen, Jacoline; Fuentes, Susana; Grievink, Wieke; van Niftrik, Laura; Tindall, Brian J; Timmerman, Harro M; Rijkers, Ger T; Smidt, Hauke

    2014-05-01

    A Gram-positive staining, rod-shaped, non-motile, spore-forming obligately anaerobic bacterium, designated CRIBT, was isolated from the gastro-intestinal tract of a rat and characterized. The major cellular fatty acids of strain CRIBT were saturated and unsaturated straight-chain C12-C19 fatty acids, with C16:0 being the predominant fatty acid. The polar lipid profile comprised six glycolipids, four phospholipids and one lipid that did not stain with any of the specific spray reagents used. The only quinone was MK-6. The predominating cell-wall sugars were glucose and galactose. The peptidoglycan type of strain CRIBT was A1σ lanthionine-direct. The genomic DNA G+C content of strain CRIBT was 28.1 mol%. On the basis of 16S rRNA gene sequence similarity, strain CRIBT was most closely related to a number of species of the genus Clostridium, including Clostridium lituseburense (97.2%), Clostridium glycolicum (96.2%), Clostridium mayombei (96.2%), Clostridium bartlettii (96.0%) and Clostridium irregulare (95.5%). All these species show very low 16S rRNA gene sequence similarity (<85%) to the type strain of Clostridium butyricum, the type species of the genus Clostridium. DNA-DNA hybridization with closely related reference strains indicated reassociation values below 32%. On the basis of phenotypic and genetic studies, a novel genus, Romboutsia gen. nov., is proposed. The novel isolate CRIBT (=DSM 25109T=NIZO 4048T) is proposed as the type strain of the type species, Romboutsia ilealis gen. nov., sp. nov., of the proposed novel genus. It is proposed that C. lituseburense is transferred to this genus as Romboutsia lituseburensis comb. nov. Furthermore, the reclassification into novel genera is proposed for C. bartlettii, as Intestinibacter bartlettii gen. nov., comb. nov. (type species of the genus), C. glycolicum, as Terrisporobacter glycolicus gen. nov., comb. nov. (type species of the genus), C. mayombei, as Terrisporobacter mayombei gen. nov., comb. nov., and C

  11. Characterization of Romboutsia ilealis gen. nov., sp. nov., isolated from the gastro-intestinal tract of a rat, and proposal for the reclassification of five closely related members of the genus Clostridium into the genera Romboutsia gen. nov., Intestinibacter gen. nov., Terrisporobacter gen. nov. and Asaccharospora gen. nov.

    PubMed

    Gerritsen, Jacoline; Fuentes, Susana; Grievink, Wieke; van Niftrik, Laura; Tindall, Brian J; Timmerman, Harro M; Rijkers, Ger T; Smidt, Hauke

    2014-05-01

    A Gram-positive staining, rod-shaped, non-motile, spore-forming obligately anaerobic bacterium, designated CRIBT, was isolated from the gastro-intestinal tract of a rat and characterized. The major cellular fatty acids of strain CRIBT were saturated and unsaturated straight-chain C12-C19 fatty acids, with C16:0 being the predominant fatty acid. The polar lipid profile comprised six glycolipids, four phospholipids and one lipid that did not stain with any of the specific spray reagents used. The only quinone was MK-6. The predominating cell-wall sugars were glucose and galactose. The peptidoglycan type of strain CRIBT was A1σ lanthionine-direct. The genomic DNA G+C content of strain CRIBT was 28.1 mol%. On the basis of 16S rRNA gene sequence similarity, strain CRIBT was most closely related to a number of species of the genus Clostridium, including Clostridium lituseburense (97.2%), Clostridium glycolicum (96.2%), Clostridium mayombei (96.2%), Clostridium bartlettii (96.0%) and Clostridium irregulare (95.5%). All these species show very low 16S rRNA gene sequence similarity (<85%) to the type strain of Clostridium butyricum, the type species of the genus Clostridium. DNA-DNA hybridization with closely related reference strains indicated reassociation values below 32%. On the basis of phenotypic and genetic studies, a novel genus, Romboutsia gen. nov., is proposed. The novel isolate CRIBT (=DSM 25109T=NIZO 4048T) is proposed as the type strain of the type species, Romboutsia ilealis gen. nov., sp. nov., of the proposed novel genus. It is proposed that C. lituseburense is transferred to this genus as Romboutsia lituseburensis comb. nov. Furthermore, the reclassification into novel genera is proposed for C. bartlettii, as Intestinibacter bartlettii gen. nov., comb. nov. (type species of the genus), C. glycolicum, as Terrisporobacter glycolicus gen. nov., comb. nov. (type species of the genus), C. mayombei, as Terrisporobacter mayombei gen. nov., comb. nov., and C

  12. Atmosphere of Mars: Mariner IV Models Compared.

    PubMed

    Fjeldbo, G; Fjeldbo, W C; Eshleman, V R

    1966-09-23

    Three classes of models for the atmosphere of Mars differ in identifying the main ionospheric layer measured by Mariner IV as being analogous to a terrestrial F(2), F(1), or E layer. At an altitude of several hundred kilometers, the relative atmospheric mass densities for these models (in the order named) are approximately 1, 10(2), and 10(4), and the temperatures are roughly 100 degrees , 200 degrees , and 400 degrees K. Theory and observation are in best agreement for an F, s model, for which photodissociation of CO(2), and diffusive separation result in an atomic-oxygen upper atmosphere, with O(+) being the principal ion in the isothermal topside of the ionosphere. The mesopause temperature minimum would be at or below the freezing point of CO(2), and dry ice particles would be expected to form. However, an F(1) model, with molecular ions in a mixed and warmer upper atmosphere, might result if photodissociation and diffusive separation are markedly less than would be expected from analogy with Earth's upper atmosphere. The E model proposed by Chamberlain and McElroy appears very unlikely; it is not compatible with the measured ionization profile unless rather unlikely assumptions are made about the values, and changes with height, of the effective recombination coefficient and the average ion mass. Moreover our theoretical heat-budget computations for the atmospheric region probed by Mariner IV indicate markedly lower temperatures and temperature gradients than were obtained for the E model. PMID:17749730

  13. Atmosphere of Mars: Mariner IV Models Compared.

    PubMed

    Fjeldbo, G; Fjeldbo, W C; Eshleman, V R

    1966-09-23

    Three classes of models for the atmosphere of Mars differ in identifying the main ionospheric layer measured by Mariner IV as being analogous to a terrestrial F(2), F(1), or E layer. At an altitude of several hundred kilometers, the relative atmospheric mass densities for these models (in the order named) are approximately 1, 10(2), and 10(4), and the temperatures are roughly 100 degrees , 200 degrees , and 400 degrees K. Theory and observation are in best agreement for an F, s model, for which photodissociation of CO(2), and diffusive separation result in an atomic-oxygen upper atmosphere, with O(+) being the principal ion in the isothermal topside of the ionosphere. The mesopause temperature minimum would be at or below the freezing point of CO(2), and dry ice particles would be expected to form. However, an F(1) model, with molecular ions in a mixed and warmer upper atmosphere, might result if photodissociation and diffusive separation are markedly less than would be expected from analogy with Earth's upper atmosphere. The E model proposed by Chamberlain and McElroy appears very unlikely; it is not compatible with the measured ionization profile unless rather unlikely assumptions are made about the values, and changes with height, of the effective recombination coefficient and the average ion mass. Moreover our theoretical heat-budget computations for the atmospheric region probed by Mariner IV indicate markedly lower temperatures and temperature gradients than were obtained for the E model.

  14. Fervidicella metallireducens gen. nov., sp. nov., a thermophilic, anaerobic bacterium from geothermal waters.

    PubMed

    Ogg, Christopher D; Patel, Bharat K C

    2010-06-01

    A strictly anaerobic, thermophilic bacterium, designated strain AeB(T), was isolated from microbial mats colonizing a run-off channel formed by free-flowing thermal water from a bore well (registered number 17263) of the Great Artesian Basin, Australia. Cells of strain AeB(T) were slightly curved rods (2.5-6.0x1.0 mum) that stained Gram-negative and formed spherical terminal to subterminal spores. The strain grew optimally in tryptone-yeast extract-Casamino acids medium at 50 degrees C (range 37-55 degrees C) and pH 7 (range pH 5-9). Strain AeB(T) grew poorly on yeast extract (0.2 %) and tryptone (0.2 %) as sole carbon sources, which were obligately required for growth on other energy sources. Growth of strain AeB(T) increased in the presence of various carbohydrates and amino acids, but not organic acids. End products detected from glucose fermentation were ethanol, acetate, CO2 and H2. In the presence of 0.2 % yeast extract, iron(III), manganese(IV), vanadium(V) and cobalt(III) were reduced, but not sulfate, thiosulfate, sulfite, elemental sulfur, nitrate or nitrite. Iron(III) was also reduced in the presence of tryptone, peptone, Casamino acids and amyl media (Research Achievement), but not starch, xylan, chitin, glycerol, ethanol, pyruvate, benzoate, lactate, acetate, propionate, succinate, glycine, serine, lysine, threonine, arginine, glutamate, valine, leucine, histidine, alanine, aspartate, isoleucine or methionine. Growth was inhibited by chloramphenicol, streptomycin, tetracycline, penicillin, ampicillin and NaCl concentrations >2 %. The DNA G+C content was 35.4+/-1 mol%, as determined by the thermal denaturation method. 16S rRNA gene sequence analysis indicated that strain AeB(T) is a member of the family Clostridiaceae, class Clostridia, phylum 'Firmicutes', and is positioned approximately equidistantly between the genera Sarcina, Anaerobacter, Caloramator and Clostridium (16S rRNA gene similarity values of 87.8-90.9 %). On the basis of 16S rRNA gene

  15. Synthesis and characterization of thorium(IV) and uranium(IV) corrole complexes.

    PubMed

    Ward, Ashleigh L; Buckley, Heather L; Lukens, Wayne W; Arnold, John

    2013-09-18

    The first examples of actinide complexes incorporating corrole ligands are presented. Thorium(IV) and uranium(IV) macrocycles of Mes2(p-OMePh)corrole were synthesized via salt metathesis with the corresponding lithium corrole in remarkably high yields (93% and 83%, respectively). Characterization by single-crystal X-ray diffraction revealed both complexes to be dimeric, having two metal centers bridged via bis(μ-chlorido) linkages. In each case, the corrole ring showed a large distortion from planarity, with the Th(IV) and U(IV) ions residing unusually far (1.403 and 1.330 Å, respectively) from the N4 plane of the ligand. (1)H NMR spectroscopy of both the Th and U dimers revealed dynamic solution behavior. In the case of the diamagnetic thorium corrole, variable-temperature, DOSY (diffusion-ordered) and EXSY (exhange) (1)H NMR spectroscopy was employed and supported that this behavior was due to an intrinsic pseudorotational mode of the corrole ring about the M-M axis. Additionally, the electronic structure of the actinide corroles was assessed using UV-vis spectroscopy, cyclic voltammetry, and variable-temperature magnetic susceptibility. This novel class of macrocyclic complexes provides a rich platform in an underdeveloped area for the study of nonaqueous actinide bonding and reactivity.

  16. Integrated Design and Production Reference Integration with ArchGenXML V1.00

    SciTech Connect

    Barter, R H

    2004-07-20

    ArchGenXML is a tool that allows easy creation of Zope products through the use of Archetypes. The Integrated Design and Production Reference (IDPR) should be highly configurable in order to meet the needs of a diverse engineering community. Ease of configuration is key to the success of IDPR. The purpose of this paper is to describe a method of using a UML diagram editor to configure IDPR through ArchGenXML and Archetypes.

  17. GenIE: an intelligent system for writing genetic counseling patient letters.

    PubMed

    Green, Nancy

    2005-01-01

    We are developing GenIE, a prototype intelligent system to create first drafts of genetic counseling patient letters. GenIE will apply natural language generation techniques to construct the first draft of a letter for subsequent review and editing, if needed, by the genetic counselor. For purposes of knowledge acquisition, we have been analyzing a corpus of patient letters. Based on the corpus analysis we are developing a knowledge base and text generation strategies.

  18. Genes and proteins of Escherichia coli K-12 (GenProtEC).

    PubMed

    Riley, M

    1997-01-01

    GenProtEC is a database of Escherichia coli genes and their gene products, classified by type of function and physiological role and with citations to the literature for each. Also present are data on sequence similarities amongE.coliproteins with PAM values, percent identity of amino acids, length of alignment and percent aligned. GenProtEC can also be accessed through the World Wide Web at URL http://mbl.edu/html/ecoli.html . PMID:9016503

  19. Description of Teunomyces gen. nov. for the Candida kruisii clade, Suhomyces gen. nov. for the Candida tanzawaensis clade and Suhomyces kilbournensis sp. nov.

    PubMed

    Kurtzman, Cletus P; Robnett, Christie J; Blackwell, Meredith

    2016-08-01

    DNA sequence analysis has shown that species of the Candida kruisii clade and species of the C. tanzawaensis clade represent phylogenetically circumscribed genera, which are described as Teunomyces gen. nov., type species T kruisii, and Suhomyces gen. nov., type species S tanzawaensis Many of the species are distributed worldwide and they are often isolated from fungus-feeding insects and their habitats. Included is the description of S. kilbournensis (type strain NRRL Y-17864, CBS 14276), a species found almost exclusively on maize kernels (Zea mays) in IL, USA. PMID:27188882

  20. Sequence analysis of ORF IV RTBV isolated from tungro infected Oryza sativa L. cv Ciherang

    NASA Astrophysics Data System (ADS)

    Hastilestari, Bernadetta Rina; Astuti, Dwi; Estiati, Amy; Nugroho, Satya

    2015-09-01

    The Effort to increase rice production is often constrained by pest and disease such as Tungro. The Tungro disease is caused by the joint infection with two dissimilar viruses; a bacil-form-DNA virus, the Rice tungro bacilliform virus(RTBV) and the spherical RNA virus, Rice tungro spherical virus (RTSV) and transmitted by Green leafhopper (Nephotettix virescens). The symptom of disease is caused by the presence of RTBV. The genome of RTBV consists of four Open reading frames (ORFs) which encode functional proteins. Of the four, ORF IV is unique because it exists only in RTBV. The most efficient method of generating disease resistance plants is to look for natural sources of resistance genes in wild or germplasm and then transfer the gene and the accompanying resistance in cultivated crop varieties. The aim of this study is, therefore, to isolate and analyze of 1170 bp gene of ORF 4 of Tungro virus isolated from an Indonesian rice cultivar, Ciherang (Oryza sativa L. cv Indica). DNA sequencing analysis using BLAST showed 94% similarity with the reference sequence gen bank Acc.M65026.1. The comparisons and mutation analysis of DNA sequences were discussed in this research.

  1. Silica-gel Particles Loaded with an Ionic Liquid for Separation of Zr(IV) Prior to Its Determination by ICP-OES

    PubMed Central

    Marwani, Hadi M.; Alsafrani, Amjad E.; Asiri, Abdullah M.; Rahman, Mohammed M.

    2016-01-01

    A new ionic liquid loaded silica gel amine (SG-APTMS-N,N-EPANTf2) was developed, as an adsorptive material, for selective adsorption and determination of zirconium, Zr(IV), without the need for a chelating intermediate. Based on a selectivity study, the SG-APTMS-N,N-EPANTf2 phase showed a perfect selectivity towards Zr(IV) at pH 4 as compared to other metallic ions, including gold [Au(III)], copper [Cu(II)], cobalt [Co(II)], chromium [Cr(III)], lead [Pb(II)], selenium [Se(IV)] and mercury [Hg(II)] ions. The influence of pH, Zr(IV) concentration, contact time and interfering ions on SG-APTMS-N,N-EPANTf2 uptake for Zr(IV) was evaluated. The presence of incorporated donor atoms in newly synthesized SG-APTMS-N,N-EPANTf2 phase played a significant role in enhancing its uptake capacity of Zr(IV) by 78.64% in contrast to silica gel (activated). The equilibrium and kinetic information of Zr(IV) adsorption onto SG-APTMS-N,N-EPANTf2 were best expressed by Langmuir and pseudo second-order kinetic models, respectively. General co-existing cations did not interfere with the extraction and detection of Zr(IV). Finally, the analytical efficiency of the newly developed method was also confirmed by implementing it for the determination of Zr(IV) in several water samples. PMID:27367692

  2. Silica-gel Particles Loaded with an Ionic Liquid for Separation of Zr(IV) Prior to Its Determination by ICP-OES.

    PubMed

    Marwani, Hadi M; Alsafrani, Amjad E; Asiri, Abdullah M; Rahman, Mohammed M

    2016-01-01

    A new ionic liquid loaded silica gel amine (SG-APTMS-N,N-EPANTf₂) was developed, as an adsorptive material, for selective adsorption and determination of zirconium, Zr(IV), without the need for a chelating intermediate. Based on a selectivity study, the SG-APTMS-N,N-EPANTf₂ phase showed a perfect selectivity towards Zr(IV) at pH 4 as compared to other metallic ions, including gold [Au(III)], copper [Cu(II)], cobalt [Co(II)], chromium [Cr(III)], lead [Pb(II)], selenium [Se(IV)] and mercury [Hg(II)] ions. The influence of pH, Zr(IV) concentration, contact time and interfering ions on SG-APTMS-N,N-EPANTf₂ uptake for Zr(IV) was evaluated. The presence of incorporated donor atoms in newly synthesized SG-APTMS-N,N-EPANTf₂ phase played a significant role in enhancing its uptake capacity of Zr(IV) by 78.64% in contrast to silica gel (activated). The equilibrium and kinetic information of Zr(IV) adsorption onto SG-APTMS-N,N-EPANTf₂ were best expressed by Langmuir and pseudo second-order kinetic models, respectively. General co-existing cations did not interfere with the extraction and detection of Zr(IV). Finally, the analytical efficiency of the newly developed method was also confirmed by implementing it for the determination of Zr(IV) in several water samples. PMID:27367692

  3. Investigation of enhanced hemocompatibility and tissue compatibility associated with multi-functional coating based on hyaluronic acid and Type IV collagen

    PubMed Central

    Li, Jingan; Zhang, Kun; Ma, Wenyong; Wu, Feng; Yang, Ping; He, Zikun; Huang, Nan

    2016-01-01

    The biocompatibility of cardiovascular devices has always been considered crucial for their clinical efficacy. Therefore, a biofunctional coating composed of Type IV collagen (CoIV) and hyaluronan (HA) was previously fabricated onto the titanium (Ti) substrate for the application of promoting vascular smooth muscle cell contractile phenotype and improving surface endothelialization. However, the anti-inflammation property, blood compatibility and in vivo tissue compatibility of the HA/CoIV coating, as paramount consideration of cardiovascular materials surface coating, have not been investigated. Thus, in this study, the three crucial properties of the HA/CoIV coating were tested. The platelet adhesion/activation test and the dynamic whole blood experiment implied that the HA/CoIV coating had better blood compatibility compared with Ti substrate and pure CoIV coating. The macrophage adhesion/activation and inflammatory cytokine release (tumor necrosis factor-alpha and interleukin-1) results indicated that the HA/CoIV coating could significantly improve the anti-inflammation property of the Ti substrate. The in vivo implantation of SD rats for 3 weeks’ results demonstrated that the HA/CoIV coating caused milder tissue response. All these results suggested that the multi-functional HA/CoIV coating possessed good biocompatibility. This research is anticipated to be potentially applied for the surface modification of cardiovascular stents. PMID:27252884

  4. Investigation of enhanced hemocompatibility and tissue compatibility associated with multi-functional coating based on hyaluronic acid and Type IV collagen.

    PubMed

    Li, Jingan; Zhang, Kun; Ma, Wenyong; Wu, Feng; Yang, Ping; He, Zikun; Huang, Nan

    2016-09-01

    The biocompatibility of cardiovascular devices has always been considered crucial for their clinical efficacy. Therefore, a biofunctional coating composed of Type IV collagen (CoIV) and hyaluronan (HA) was previously fabricated onto the titanium (Ti) substrate for the application of promoting vascular smooth muscle cell contractile phenotype and improving surface endothelialization. However, the anti-inflammation property, blood compatibility and in vivo tissue compatibility of the HA/CoIV coating, as paramount consideration of cardiovascular materials surface coating, have not been investigated. Thus, in this study, the three crucial properties of the HA/CoIV coating were tested. The platelet adhesion/activation test and the dynamic whole blood experiment implied that the HA/CoIV coating had better blood compatibility compared with Ti substrate and pure CoIV coating. The macrophage adhesion/activation and inflammatory cytokine release (tumor necrosis factor-alpha and interleukin-1) results indicated that the HA/CoIV coating could significantly improve the anti-inflammation property of the Ti substrate. The in vivo implantation of SD rats for 3 weeks' results demonstrated that the HA/CoIV coating caused milder tissue response. All these results suggested that the multi-functional HA/CoIV coating possessed good biocompatibility. This research is anticipated to be potentially applied for the surface modification of cardiovascular stents. PMID:27252884

  5. Dinghuibacter silviterrae gen. nov., sp. nov., isolated from forest soil.

    PubMed

    Lv, Ying-Ying; Wang, Jia; Chen, Mei-Hong; You, Jia; Qiu, Li-Hong

    2016-04-01

    A novel Gram-stain negative, non-motile, rod-shaped, aerobic bacterial strain, designated DHOA34T, was isolated from forest soil of Dinghushan Biosphere Reserve, Guangdong Province, China. Comparative 16S rRNA gene sequence analysis showed that it exhibited highest similarity with Flavisolibacter ginsengiterrae Gsoil 492T and Flavitalea populi HY-50RT, at 90.89 and 90.83%, respectively. In the neighbour-joining phylogenetic tree based on 16S rRNA gene sequences, DHOA34T formed an independent lineage within the family Chitinophagaceae but was distinct from all recognized species and genera of the family. The major cellular fatty acids of DHOA34T included iso-C15:0, anteiso-C15:0, iso-C17:0 3-OH and summed feature 3 (C16:1ω6c and/or C16:1ω7c). The DNA G+C content was 51.6 mol% and the predominant quinone was menaquinone 7 (MK-7). Flexirubin pigments were produced. The phenotypic, chemotaxonomic and phylogenetic data demonstrate consistently that strain DHOA34T represents a novel species of a new genus in the family Chitinophagaceae, for which the name Dinghuibacter silviterrae gen. nov., sp. nov. is proposed. The type strain of Dinghuibacter silviterrae is DHOA34T (=CGMCC 1.15023T=KCTC 42632T). PMID:26828023

  6. Saccharibacillus sacchari gen. nov., sp. nov., isolated from sugar cane.

    PubMed

    Rivas, Raúl; García-Fraile, Paula; Zurdo-Piñeiro, José Luis; Mateos, Pedro F; Martínez-Molina, Eustoquio; Bedmar, Eulogio J; Sánchez-Raya, Juan; Velázquez, Encarna

    2008-08-01

    A bacterial strain designated GR21T was isolated from apoplastic fluid of Saccharum officinarum (sugar cane). Phylogenetic analysis based on 16S rRNA gene sequences showed that the isolate forms a separate branch within the family 'Paenibacillaceae', with Paenibacillus as the closest related genus. Within this genus, the closest related species is Paenibacillus xylanilyticus, with 93.4 % similarity to the sequence of the type strain. The isolate has Gram-variable, facultatively anaerobic, rod-shaped cells, motile by polar and subpolar flagella. Round, non-ornamented, central or subterminal spores are formed in unswollen sporangia. The strain is catalase-positive and oxidase-negative on nutrient agar medium. Cellulose and aesculin were hydrolysed, whereas xylan, starch and gelatin were not. Growth was supported by many carbohydrates as carbon sources. Strain GR21T displayed a lipid profile consisting of diphosphatidylglycerol, phosphatidylglycerol, an unknown aminophospholipid, two unknown glycolipids and an unknown phosphoglycolipid. MK-7 was the predominant menaquinone and anteiso-C15: 0 was the major fatty acid. The DNA G+C content was 57.8 mol%. Phylogenetic and phenotypic analyses, including assimilation of carbon sources and exoenzyme production commonly used for classification within the family 'Paenibacillaceae', showed that strain GR21T belongs to a new genus within this family, for which the name Saccharibacillus sacchari gen. nov., sp. nov. is proposed. The type strain of Saccharibacillus sacchari is GR21T (=LMG 24085T =DSM 19268T).

  7. Preliminary Investigation of Civil Tiltrotor in NextGen Airspace

    NASA Technical Reports Server (NTRS)

    Young, Larry A.; Salvano, Dan; Wright, Ken; Chung, William; Young, Ray; Miller, David; Paris, Alfanso; Gao, Huina; Cheng, Victor

    2010-01-01

    Presentation intro: Tiltrotor aircraft have long been envisioned as being a potentially viable means of commercial aviation transport. Preliminary results from an ongoing study into the operational and technological considerations of Civil Tiltrotor (CTR) operation in the Next Generation airspace, circa the 2025 time-frame, are presented and discussed. In particular, a fleet of CTR aircraft has been conceptually designed. The performance characteristics of this CTR fleet was subsequently translated into BADA (Base of Aircraft DAta) models that could be used as input to emulate CTR aircraft operations in the ACES and AvTerminal airspace and terminal area simulation tools. A network of nine North-Eastern corridor airports is the focus of the airspace simulation effort; the results from this airport network viII then be extrapolated to provide insights into systemic impact of CTRs on the National Airspace System (NAS). Future work will also be detailed as to attempts to model the systemic effects of noise and emissions from this fleet of new aircraft as well as assess their leveraged impact on public service missions, in time of need, such as major regional/national disaster relief efforts. The ideal outcome of this study is a set of results whereby Next Gen airspace CONOPs can be refined to reflect potential CTR capabilities and, conversely, CTR technology development efforts can be better informed as to key performance requirement thresholds needed to be met in order to successfully introduce these aircraft into civilian aviation operation.

  8. The MAX IV storage ring project.

    PubMed

    Tavares, Pedro F; Leemann, Simon C; Sjöström, Magnus; Andersson, Ake

    2014-09-01

    The MAX IV facility, currently under construction in Lund, Sweden, features two electron storage rings operated at 3 GeV and 1.5 GeV and optimized for the hard X-ray and soft X-ray/VUV spectral ranges, respectively. A 3 GeV linear accelerator serves as a full-energy injector into both rings as well as a driver for a short-pulse facility, in which undulators produce X-ray pulses as short as 100 fs. The 3 GeV ring employs a multibend achromat (MBA) lattice to achieve, in a relatively short circumference of 528 m, a bare lattice emittance of 0.33 nm rad, which reduces to 0.2 nm rad as insertion devices are added. The engineering implementation of the MBA lattice raises several technological problems. The large number of strong magnets per achromat calls for a compact design featuring small-gap combined-function magnets grouped into cells and sharing a common iron yoke. The small apertures lead to a low-conductance vacuum chamber design that relies on the chamber itself as a distributed copper absorber for the heat deposited by synchrotron radiation, while non-evaporable getter (NEG) coating provides for reduced photodesorption yields and distributed pumping. Finally, a low main frequency (100 MHz) is chosen for the RF system yielding long bunches, which are further elongated by passively operated third-harmonic Landau cavities, thus alleviating collective effects, both coherent (e.g. resistive wall instabilities) and incoherent (intrabeam scattering). In this paper, we focus on the MAX IV 3 GeV ring and present the lattice design as well as the engineering solutions to the challenges inherent to such a design. As the first realisation of a light source based on the MBA concept, the MAX IV 3 GeV ring offers an opportunity for validation of concepts that are likely to be essential ingredients of future diffraction-limited light sources. PMID:25177978

  9. The MAX IV storage ring project

    PubMed Central

    Tavares, Pedro F.; Leemann, Simon C.; Sjöström, Magnus; Andersson, Åke

    2014-01-01

    The MAX IV facility, currently under construction in Lund, Sweden, features two electron storage rings operated at 3 GeV and 1.5 GeV and optimized for the hard X-ray and soft X-ray/VUV spectral ranges, respectively. A 3 GeV linear accelerator serves as a full-energy injector into both rings as well as a driver for a short-pulse facility, in which undulators produce X-ray pulses as short as 100 fs. The 3 GeV ring employs a multibend achromat (MBA) lattice to achieve, in a relatively short circumference of 528 m, a bare lattice emittance of 0.33 nm rad, which reduces to 0.2 nm rad as insertion devices are added. The engineering implementation of the MBA lattice raises several technological problems. The large number of strong magnets per achromat calls for a compact design featuring small-gap combined-function magnets grouped into cells and sharing a common iron yoke. The small apertures lead to a low-conductance vacuum chamber design that relies on the chamber itself as a distributed copper absorber for the heat deposited by synchrotron radiation, while non-evaporable getter (NEG) coating provides for reduced photodesorption yields and distributed pumping. Finally, a low main frequency (100 MHz) is chosen for the RF system yielding long bunches, which are further elongated by passively operated third-harmonic Landau cavities, thus alleviating collective effects, both coherent (e.g. resistive wall instabilities) and incoherent (intrabeam scattering). In this paper, we focus on the MAX IV 3 GeV ring and present the lattice design as well as the engineering solutions to the challenges inherent to such a design. As the first realisation of a light source based on the MBA concept, the MAX IV 3 GeV ring offers an opportunity for validation of concepts that are likely to be essential ingredients of future diffraction-limited light sources. PMID:25177978

  10. High Temperature Irradiation Effects in Selected Generation IV Structural Alloys

    SciTech Connect

    Nanstad, Randy K; McClintock, David A; Hoelzer, David T; Tan, Lizhen; Allen, Todd R.

    2009-01-01

    In the Generation IV Materials Program cross-cutting task, irradiation and testing were carried out to address the issue of high temperature irradiation effects with selected current and potential candidate metallic alloys. The materials tested were (1) a high-nickel iron-base alloy (Alloy 800H); (2) a nickel-base alloy (Alloy 617); (3) two advanced nano-structured ferritic alloys (designated 14YWT and 14WT); and (4) a commercial ferritic-martensitic steel (annealed 9Cr-1MoV). Small tensile specimens were irradiated in rabbit capsules in the High-Flux Isotope Reactor at temperatures from about 550 to 700 C and to irradiation doses in the range 1.2 to 1.6 dpa. The Alloy 800H and Alloy 617 exhibited significant hardening after irradiation at 580 C; some hardening occurred at 660 C as well, but the 800H showed extremely low tensile elongations when tested at 700 C. Notably, the grain boundary engineered 800H exhibited even greater hardening at 580 C and retained a high amount of ductility. Irradiation effects on the two nano-structured ferritic alloys and the annealed 9Cr-1MoV were relatively slight at this low dose.

  11. Trans-surgical restoration of extensive Class IV defects in the anterior dentition.

    PubMed

    Fahl, N

    1997-09-01

    Direct bonding is the most commonly utilized treatment for conservative aesthetic restoration of the anterior dentition. Class IV defects require special attention due to their high incidence, particularly in young patients. One of the major challenges for the clinician in treating defects in this category is selecting the appropriate restorative composite resin material that emulates the physical and optical characteristics of dentin and enamel and conceal the fracture line at the tooth/composite interface. Class IV defects with margins violating the biologic width present another concern, since this violation often impedes the attainment of the correct anatomic contours. The learning objective of this article is to describe a technique for achieving a correct integration of the periodontium, the tooth structure, and the restorative composite resin material to achieve a high level of aesthetic excellence. PMID:9743678

  12. Removal of thorium (IV) ions from aqueous solution by a novel nanoporous ZnO: Isotherms, kinetic and thermodynamic studies.

    PubMed

    Kaynar, Ümit H; Ayvacıklı, Mehmet; Hiçsönmez, Ümran; Kaynar, Sermin Çam

    2015-12-01

    The adsorption of thorium (IV) from aqueous solutions onto a novel nanoporous ZnO particles prepared by microwave assisted combustion was studied using batch methods under different experimental conditions. The effect of contact time, solution pH, initial concentration and temperature on adsorption process was studied. The ability of this material to remove Th (IV) from aqueous solution was characterises by Langmuir, Freunlinch and Temkin adsorption isotherms. The adsorption percent and distribution coefficient for nanoporous ZnO powders in optimum conditions were 97% ± 1.02; 8080 L kg(-1)for Th (IV), respectively. Based on the Langmuir model, the maximum adsorption capacity of nanoporous ZnO for Th (IV) was found to be 1500 g kg(-1). Thermodynamic parameters were determined and discussed. The results indicated that nanoporous ZnO was suitable as sorbent material for recovery and adsorption of Th (IV) ions from aqueous solutions. The radioactive Th (VI) in surface water, sea water and waste waters from technologies producing nuclear fuels, mining (uranium and thorium) and laboratories working with radioactive materials (uranium and thorium) can be removed with this nanoporous ZnO.

  13. Multicomponent Analysis of the UV Si IV and C IV Broad Absorption Troughs in BALQSO Spectra: The Examples of J01225 + 1339 and J02287 + 0002

    NASA Astrophysics Data System (ADS)

    Stathopoulos, D.; Danezis, E.; Lyratzi, E.; Antoniou, A.; Tzimeas, D.

    2015-12-01

    Broad Absorption Line QSOs (BALQSOs) are a subtype of radio-quite QSOs that exhibit complex and unusually broad (FWHM ≥ 2,000 km/s) absorption lines. The existence of these lines in BALQSO spectra raises some questions with respect to the properties, the physical conditions and kinematics of the BAL material as well as the morphology of BAL troughs. In this study, taking into consideration the clumpy structure of the AGN outflow winds, we propose a physical model in order to explain the formation of BAL troughs and we give the mathematical description of this model. We also propose a method for analyzing spectroscopically the BAL profiles in the UV region of the electromagnetic spectrum. This method consists of the criteria we set during the fitting process of BAL troughs. The purpose of these criteria is to enable us to determine the exact number of components needed to simulate accurately the BAL troughs and guarantee the uniqueness of the fit. We give an application of the model and the method for Si IV and C IV resonance lines in the case of two BALQSOs. From the analysis, we conclude that the BAL material is in the form of clouds (density enhancements) that move radially and intercept the line-of-sight to the central continuum source. Using our method, we find the number of absorption components needed to simulate the BAL profiles, which means the number of clouds in the line-of-sight. We calculate the velocity shifts, the FWHM and the optical depths of the absorption components of BALs and we propose an internal structure for these clouds. Finally, we give some correlations between the properties of absorption components of Si IV and C IV.

  14. 78 FR 21491 - DeltaPoint Capital IV, L.P., DeltaPoint Capital IV (New York), L.P.; Notice Seeking Exemption...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-10

    ... ADMINISTRATION DeltaPoint Capital IV, L.P., DeltaPoint Capital IV (New York), L.P.; Notice Seeking Exemption... that DeltaPoint Capital IV, L.P. and DeltaPoint Capital IV (New York), L.P., 45 East Avenue, 6th Floor... Business Administration (``SBA'') Rules and Regulations (13 CFR 107.730). DeltaPoint Capital IV,...

  15. SOLAR TRANSITION REGION LINES OBSERVED BY THE INTERFACE REGION IMAGING SPECTROGRAPH: DIAGNOSTICS FOR THE O IV AND Si IV LINES

    SciTech Connect

    Dudík, J.; Del Zanna, G.; Mason, H. E.; Dzifčáková, E.; Golub, L.

    2014-01-01

    The formation of the transition region O IV and Si IV lines observable by the Interface Region Imaging Spectrograph (IRIS) is investigated for both Maxwellian and non-Maxwellian conditions characterized by a κ-distribution exhibiting a high-energy tail. The Si IV lines are formed at lower temperatures than the O IV lines for all κ. In non-Maxwellian situations with lower κ, the contribution functions are shifted to lower temperatures. Combined with the slope of the differential emission measure, it is possible for the Si IV lines to be formed at very different regions of the solar transition region than the O IV lines; possibly close to the solar chromosphere. Such situations might be discernible by IRIS. It is found that photoexcitation can be important for the Si IV lines, but is negligible for the O IV lines. The usefulness of the O IV ratios for density diagnostics independently of κ is investigated and it is found that the O IV 1404.78 Å/1399.77 Å ratio provides a good density diagnostics except for very low T combined with extreme non-Maxwellian situations.

  16. Stroke Mimic Secondary to IV Fentanyl Administration

    PubMed Central

    Uhegwu, Nnamdi; Bashir, Asif; Dababneh, Haitham; Hussain, Mohammed; Misthal, Sara; Mocco, J Duffy

    2015-01-01

    Fentanyl is a potent opioid used commonly in acute care because of its rapid onset and short duration of action. It has fewer side effects when compared with commonly available opioids, such as morphine and hydromorphine. We report an unusual side effect of transient aphasia following fentanyl administration. A 61-year-old female presented for an elective embolization of a periophthalmic artery aneurysm. She developed immediate episodes of aphasia on two separate occasions following administration of intravenous (IV) fentanyl. The high lipid solubility explains the rapid onset of action of fentanyl as it rapidly passes through the blood–brain barrier and through cell membranes. Immediately following the administration of fentanyl, the patient developed aphasia. There were no other clinical or neurological imaging findings that could account for these symptoms. We believe that aphasia may be an unusual side effect of fentanyl, and it is something clinicians should be aware of. PMID:25825627

  17. C1IV:. Gravitational Wave Data Analysis

    NASA Astrophysics Data System (ADS)

    Sathyaprakash, B. S.

    2002-09-01

    Resonant bar detectors are routinely searching for astronomical sources of gravitational waves and to setting upper limits on event rates. Interferometric detectors are beginning to operate at sensitivity levels good enough to set meaningful upper limits and begin astrophysical searches. With the long baseline interferometers scheduled to take data at unprecedented sensitivity levels the next few years will be a very exciting period for gravitational waves. In session C1iv there were talks focusing on gravitational wave searches (Krolak and Sintes), setting upper limits on astrophysical signals (Brady and Whelan), theoretical developments in modelling binary black holes (Iyer), testing general relativity with gravitational wave data (Will) and tools for gravitational wave data analysis (Schutz). There was also a one-hour round-table discussion on setting upper limits chaired by Andersson.

  18. [Vaughan Williams class IV antiarrhythmic drugs].

    PubMed

    Horie, M; Washizuka, T; Ikeguchi, S; Sasayama, S

    1996-08-01

    Vaughan Williams class IV antiarrhythmic drugs have Ca-channel blocking actions. Since L-type Ca-channels play key roles in regulating pulse conduction in atrioventricular node as well as in pathologically-depolarized myocardium, Ca-channel blockers known to modulate this type of Ca-channel (ICa,L) are used as antiarrhythmic agents. ICa,L channels have relatively high threshold potential (-40 mV) to activate and long-opening properties, and are enhanced by beta-adrenergic stimulation. Among three major ICa,L blockers, dihydropyridines such as nifedipine were found to bind to the channel from extracellular side. In contrast, verapamil and diltiazem interact with the channel from the cytoplasmic side, thereby causing rate-dependent block of ICa,L channels. This sideness of pharmacological action of the Ca-channel blockers determines an important therapeutic modality and their indication for tachyarrhythmias.

  19. Classification of amok in DSM-IV.

    PubMed

    Gaw, A C; Bernstein, R L

    1992-08-01

    Culture-bound syndromes have been described worldwide in many individuals and, for certain syndromes, in epidemic proportion, yet these disorders have been classified as rare and exotic conditions warranting minimal attention. Development of the fourth edition of the Diagnostic and Statistical Manual of Mental Disorders and the tenth edition of the International Classification of Diseases offers an opportunity for providing a more sophisticated classification of these phenomena. The authors examine amok, a syndrome first described in Malaysia that consists of homicidal frenzy preceded by a state of brooding and ending with somnolence and amnesia. They discuss the concept of and criteria for a culture-specific disorder and propose that amok be classified as a culture-specific explosive behavioral disorder in DSM-IV.

  20. Stroke Mimic Secondary to IV Fentanyl Administration.

    PubMed

    Uhegwu, Nnamdi; Bashir, Asif; Dababneh, Haitham; Hussain, Mohammed; Misthal, Sara; Mocco, J Duffy

    2015-02-01

    Fentanyl is a potent opioid used commonly in acute care because of its rapid onset and short duration of action. It has fewer side effects when compared with commonly available opioids, such as morphine and hydromorphine. We report an unusual side effect of transient aphasia following fentanyl administration. A 61-year-old female presented for an elective embolization of a periophthalmic artery aneurysm. She developed immediate episodes of aphasia on two separate occasions following administration of intravenous (IV) fentanyl. The high lipid solubility explains the rapid onset of action of fentanyl as it rapidly passes through the blood-brain barrier and through cell membranes. Immediately following the administration of fentanyl, the patient developed aphasia. There were no other clinical or neurological imaging findings that could account for these symptoms. We believe that aphasia may be an unusual side effect of fentanyl, and it is something clinicians should be aware of. PMID:25825627

  1. Ratchet model for type IV pilus retraction

    NASA Astrophysics Data System (ADS)

    Lindén, Martin; Tuohimaa, Tomi; Jonsson, Ann-Beth; Wallin, Mats

    2004-03-01

    Type IV pilus rectraction is required for twitching motility in a wide range of bacteriae, including Neisseria gonorrhoeae, Myxococcus xanthus and Pseudomonas aeruginosa. The mechanism of retraction is believed to be filament disassembly mediated by PilT, a member of the AAA family of motor proteins. Recent laser tweezer measurements of the force-velocity relation of PilT in N. gonorrhoeae, reveal that single PilT complexes generate forces of over 100 pN. We assume that PilT forms a cyclic ATPase surrounding the base of the pilus and formulate a model of retraction in terms of coupled flashing ratchets. We obtain a force-velocity relation by numerical simulation of the model which is in qualitative agreement with the experimental results.

  2. Review of the BCI Competition IV

    PubMed Central

    Tangermann, Michael; Müller, Klaus-Robert; Aertsen, Ad; Birbaumer, Niels; Braun, Christoph; Brunner, Clemens; Leeb, Robert; Mehring, Carsten; Miller, Kai J.; Müller-Putz, Gernot R.; Nolte, Guido; Pfurtscheller, Gert; Preissl, Hubert; Schalk, Gerwin; Schlögl, Alois; Vidaurre, Carmen; Waldert, Stephan; Blankertz, Benjamin

    2012-01-01

    The BCI competition IV stands in the tradition of prior BCI competitions that aim to provide high quality neuroscientific data for open access to the scientific community. As experienced already in prior competitions not only scientists from the narrow field of BCI compete, but scholars with a broad variety of backgrounds and nationalities. They include high specialists as well as students. The goals of all BCI competitions have always been to challenge with respect to novel paradigms and complex data. We report on the following challenges: (1) asynchronous data, (2) synthetic, (3) multi-class continuous data, (4) session-to-session transfer, (5) directionally modulated MEG, (6) finger movements recorded by ECoG. As after past competitions, our hope is that winning entries may enhance the analysis methods of future BCIs. PMID:22811657

  3. Analgesia after Epidural Dexamethasone is Further Enhanced by IV Dipyrone, but Not IV Parecoxibe Following Minor Orthopedic Surgery

    PubMed Central

    Righeti, Claudia CF; Kitayama, Antonio T

    2014-01-01

    Background Epidural administration of dexamethasone has been suggested for pain control after minor orthopedic surgery. This study was conducted to assess its efficacy after such surgery, combined or not to IV dipyrone, IV parecoxibe or their combination. Methods 91 patients were randomly assigned to seven groups. Patients were submitted to spinal bupivacaine anesthesia combined to epidural administration of either 10 ml saline or 10 mg dexamethasone diluted to 10-ml volume. Patients also received 10 ml IV saline or 1 gr dipyrone and/or 40 mg parecoxibe diluted to 10 ml with saline. Control group (CG) received epidural and IV saline. Dexamethasone group (DexG) received epidural dexamethasone and IV saline. Dipyrone group (DipG) received epidural saline and IV dipyrone. Dex-Dip G received epidural dexamethasone and IV dipyrone. Parecoxibe group (ParG) received epidural saline and IV parecoxibe. Dex-ParG received epidural dexamethasone and IV parecoxibe. Finally, Dex-Dip-ParG received epidural dexamethasone and IV dipyrone plus IV parecoxibe. Results The CG expressed 4h of analgesia and sooner requested pain killer. DexG was similar to DipG or ParG or Dex-ParG (7-hours), and they requested less ketoprofen compared to the CG (P < 0.05). However, the Dex-DipG and the Dex-Dip-ParG resulted in longer time to demand pain killer (17-hours) and less ketoprofen consumption in 24-hours (P < 0.002). Adverse effects were similar among groups. Conclusions The analgesia secondary to epidural dexamethasone was enhanced by IV dipyrone, while no effects were observed by the addition of IV parecoxibe. PMID:25317284

  4. Solid Waste Operations Complex W-113: Project cost estimate. Preliminary design report. Volume IV

    SciTech Connect

    1995-01-01

    This document contains Volume IV of the Preliminary Design Report for the Solid Waste Operations Complex W-113 which is the Project Cost Estimate and construction schedule. The estimate was developed based upon Title 1 material take-offs, budgetary equipment quotes and Raytheon historical in-house data. The W-113 project cost estimate and project construction schedule were integrated together to provide a resource loaded project network.

  5. 34 CFR 85.1017 - Title IV, HEA program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (NONPROCUREMENT) Definitions § 85.1017 Title IV, HEA program. A title IV, HEA program includes any program listed in 34 CFR 668.1(c). Authority: E.O. 12549 (3 CFR, 1986 Comp., p.1890: E.O. 12689 (3 CFR, 1989 Comp... 34 Education 1 2010-07-01 2010-07-01 false Title IV, HEA program. 85.1017 Section...

  6. 34 CFR 85.1018 - Title IV, HEA transaction.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (3 CFR, 1986 Comp., p. 189) E.O. 12689 (3 CFR, 1989 Comp., p. 235); 20 U.S.C. 1082, 1094, 1221e-3 and... 34 Education 1 2010-07-01 2010-07-01 false Title IV, HEA transaction. 85.1018 Section 85.1018... (NONPROCUREMENT) Definitions § 85.1018 Title IV, HEA transaction. A title IV, HEA transaction includes: (a)...

  7. Fundamental Understanding of Crack Growth in Structural Components of Generation IV Supercritical Light Water Reactors

    SciTech Connect

    Iouri I. Balachov; Takao Kobayashi; Francis Tanzella; Indira Jayaweera; Palitha Jayaweera; Petri Kinnunen; Martin Bojinov; Timo Saario

    2004-11-17

    This work contributes to the design of safe and economical Generation-IV Super-Critical Water Reactors (SCWRs) by providing a basis for selecting structural materials to ensure the functionality of in-vessel components during the entire service life. During the second year of the project, we completed electrochemical characterization of the oxide film properties and investigation of crack initiation and propagation for candidate structural materials steels under supercritical conditions. We ranked candidate alloys against their susceptibility to environmentally assisted degradation based on the in situ data measure with an SRI-designed controlled distance electrochemistry (CDE) arrangement. A correlation between measurable oxide film properties and susceptibility of austenitic steels to environmentally assisted degradation was observed experimentally. One of the major practical results of the present work is the experimentally proven ability of the economical CDE technique to supply in situ data for ranking candidate structural materials for Generation-IV SCRs. A potential use of the CDE arrangement developed ar SRI for building in situ sensors monitoring water chemistry in the heat transport circuit of Generation-IV SCWRs was evaluated and proved to be feasible.

  8. [History of genetics in Brazil: a view from the Museu da Genética at the Universidade Federal do Rio Grande do Sul].

    PubMed

    Souza, Vanderlei Sebastiao de; Dornelles, Rodrigo Ciconet; Coimbra Junior, Carlos E A; Santos, Ricardo Ventura

    2013-06-01

    This work addresses the context of the creation, as well as the structure and contents, of the Museum of Genetics (Museu da Genética), created in 2011 and located in the Department of Genetics of the Federal University of Rio Grande do Sul (Universidade Federal do Rio Grande do Sul), in Porto Alegre, Brazil. The materials available at the Museum of Genetics are a rich resource for research on the history of genetics in Brazil (and especially the genetics of human populations) beginning with the second half of the twentieth century. Despite the prominence of the field of genetics in Brazil, little research has been done on this topic.

  9. Electronic and magnetic properties of CrGen (15 ⩽ n ⩽ 29) clusters: A DFT study

    NASA Astrophysics Data System (ADS)

    Mahtout, Sofiane; Tariket, Yacine

    2016-06-01

    We report ab initio calculations of electronic and magnetic properties of medium-sized CrGen (15 ⩽ n ⩽ 29) clusters using density functional theory. The encapsulation of Cr atoms within Gen clusters leads to stable Cr encapsulated Gen clusters. The binding energies generally increase while the differences between the highest occupied molecular orbital and lowest unoccupied molecular orbital (HOMO-LUMO gaps) generally decrease with the increasing of cluster size. The clusters of CrGen at size 16, 17, 19, 22, 24 and 29 exhibit high stabilities when compared to their neighbors. This has been discussed in terms of their structures, energies and the effect of the position of doping atom. Doping of Gen clusters with one Cr atom leads to CrGen clusters with magnetic moment depending on the structure of the clusters and the position of Cr atom in the clusters. Moreover, vertical ionization potential, vertical electronic affinity, and chemical hardness are also analyzed.

  10. The occurrence of period IV elements in dinoflagellate chromatin: an X-ray microanalytical study.

    PubMed

    Kearns, L P; Sigee, D C

    1980-12-01

    X-ray microanalysis of unfixed frozen-dried cryosections, and of unfixed cryosections collected by a sucrose drop technique, revealed the presence of Ca, Mn, Fe, Ni, Cu and Zn (Period IV, Periodic Table) in association with the permanently condensed chromosomes of Prorocentrum micans. All of these metals, with the exception of Mn, routinely occurred in the chromatin of cells that had been fixed in glutaraldehyde, ethanol-dehydrated, and resin-embedded. Their detection at high levels in chemically dehydrated chromatin of Prorocentrum micans, and 3 other dinoflagellate species cultured in the laboratory, suggests they are important as bound (insoluble) components of the chromatin. Detailed analysis of the fixed, ethanol-dehydrated material showed that for these particular cultures, each species had its own characteristic mass fraction pattern of chromatin-bound elements which differed markedly from that of the other species. Calculation of relative numbers of atoms from the mass fraction showed that for each species about 40-50 atoms of bound Period IV elements were present per 100 atoms of phosphorus. This is approximately equivalent to one Period IV atom per 2 DNA nucleotides or per base pair. Although considerable variation exists between species in terms of individual element levels, the total number of atoms of Period IV elements relative to phosphorus is remarkably constant. PMID:7194876

  11. Safety and feasibility of radiofrequency ablation for treatment of Bosniak IV renal cysts

    PubMed Central

    de Menezes, Marcos Roberto; Viana, Publio Cesar Cavalcante; Yamanari, Tássia Regina; Reis, Leonardo Oliveira; Nahas, William

    2016-01-01

    ABSTRACT Purpose To describe our initial experience with radiofrequency ablation (RFA) of Bosniak IV renal cysts. Materials and Methods From 2010 to 2014, 154 renal tumor cases were treated with percutaneous thermal ablation, of which 10 cases (6.4%) from nine patients were complex renal cysts and were treated with radiofrequency ablation. Results All complex cysts were classified as Bosniak IV (four women and five men; mean age: 63.6 yrs, range: 33–83 years). One patient had a single kidney. Lesion size ranged from 1.5 to 4.1cm (mean: 2.5cm) and biopsy was performed on four cysts immediately before the procedure, all of which were malignant (two clear cell and two papillary carcinoma). Mean volume reduction of complex cysts was 25% (range: 10–40%). No patients required retreatment with RFA and no immediate or late complications were observed. The follow-up of Bosniak IV cysts had a median of 27 months (interquartile range [IQR], 23 to 38) and no recurrence or significant loss of renal function were observed. Conclusions Mid-term follow-up of the cases in our database suggests that image-guided percutaneous RFA can treat Bosniak IV cysts with very low complication rates and satisfactorily maintain renal function. PMID:27286107

  12. A new crystal phase of ammonium nitrate: a monoclinic distortion of AN-IV

    NASA Astrophysics Data System (ADS)

    Oleynik, Ivan; Steele, Brad

    2015-06-01

    Ammonium nitrate (AN) is a major component of the energetic material ANFO. It is important to understand the high-pressure crystal phases and corresponding phase transitions of AN as its structural polymorphism might affect the energetic performance, including crystal density, detonation velocity and shock initiation of chemical reactions. A new crystal phase of AN is found using first principles evolutionary crystal structure search. It is a monoclinic distortion of phase IV of AN (AN-IV) in the P21/m space group (AN-P21/m). The calculated Raman spectrum of this new phase is consistent with the recently reported experimental Raman spectrum that contains two peaks at high pressures associated with the phase transition. The new phase is calculated to have lower free energy than AN-IV above 11.2 GPa, a pressure close to the experimentally reported phase transition pressure of 17 GPa. The calculated Raman spectra of both AN-P21/m and AN-IV as a function of pressure display good agreement with experiment up to 40 GPa.

  13. Terrilactibacillus laevilacticus gen. nov., sp. nov., isolated from soil.

    PubMed

    Prasirtsak, Budsabathip; Thongchul, Nuttha; Tolieng, Vasana; Tanasupawat, Somboon

    2016-03-01

    A Gram-stain-positive, catalase-positive, facultatively anaerobic, spore-forming, rod-shaped bacterium, strain NK26-11T, was isolated from soil in Thailand. This strain produced d-lactic acid from glucose homofermentatively, and grew at 20-45 °C and pH 5-8.5. The cell-wall peptidoglycan contained meso-diaminopimelic acid. The major respiratory quinone was menaquinone 7 (MK-7), the DNA G+C content was 42.6 mol%, and the major cellular fatty acids were anteiso-C15 : 0 and anteiso-C17 : 0. On the basis of 16S rRNA gene sequences analysis, strain NK26-11T was closely related to Bacillus solimangrovi JCM 18994T (93.89 % 16S rRNA gene sequence similarity), Pullulanibacillus naganoensis LMG 12887T (93.32 %), Sporolactobacillus inulinus NRIC 1133T (92.99 %), Tuberibacillus calidus JCM 13397T (92.98 %) and Thalassobacillus devorans DSM 16966T ( < 90.93 %). Strain NK26-11T could be clearly distinguished from the closely related genera based on phenotypic characteristics and DNA G+C content, and thus represents a novel species of a new genus between the Bacillus and Sporolactobacillus cluster, for which the name Terrilactibacillus laevilacticus gen. nov., sp. nov. is proposed. The type strain of the type species is NK26-11T ( = LMG 27803T = TISTR 2241T = PCU 335T). PMID:26843374

  14. Xanthomarina gelatinilytica gen. nov., sp. nov., isolated from seawater.

    PubMed

    Vaidya, Bhumika; Kumar, Ravinder; Sharma, Gunjan; Srinivas, Tanuku Naga Radha; Kumar, Pinnaka Anil

    2015-11-01

    A novel Gram-stain-negative, rod-shaped, yellow-pigmented, non-sporulating, non-motile bacterium, designated strain AK20T, was isolated from seawater collected from Kochi city, Kerala state, India. Colonies on marine agar were circular, yellow, shiny, translucent, 2-3 mm in diameter, convex and with entire margin. Flexirubin-type pigment was present. The fatty acids were dominated by iso-branched units with a high abundance of iso-C15:0, iso-C15:1 G, iso-C17:0 3-OH, summed feature 3 (C16:1ω7c and/or iso-C15:0 2-OH) and iso-C15:0 3-OH. Polar lipids included phosphatidylethanolamine, two unidentified aminophospholipids, two unidentified phospholipids and four unidentified lipids. Menaquinone 6 (MK-6) was the predominant respiratory quinone. The DNA G+C content of strain AK20T was 38.8 mol%. Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain AK20T was closely related to Formosa spongicola A2T and Bizionia paragorgiae KMM 6029T (pair-wise sequence similarities of 95.9 and 95.7%, respectively), forming a distinct branch within the family Flavobacteriaceae and clustering with the clade comprising species of the genus Bizionia. Based on phenotypic and chemotaxonomic characteristics and phylogenetic analysis, strain AK20T is different from the existing genera in the family Flavobacteriaceae, and is therefore considered to represent a novel species of a new genus, for which the name Xanthomarina gelatinilytica gen. nov., sp. nov. is proposed. The type strain of Xanthomarina gelatinilytica is AK20T ( = MTCC 11705T = JCM 18821T). PMID:26956595

  15. Motiliproteus sediminis gen. nov., sp. nov., isolated from coastal sediment.

    PubMed

    Wang, Zong-Jie; Xie, Zhi-Hong; Wang, Chao; Du, Zong-Jun; Chen, Guan-Jun

    2014-10-01

    A novel Gram-stain-negative, rod-to-spiral-shaped, oxidase- and catalase- positive and facultatively aerobic bacterium, designated HS6(T), was isolated from marine sediment of Yellow Sea, China. It can reduce nitrate to nitrite and grow well in marine broth 2216 (MB, Hope Biol-Technology Co., Ltd) with an optimal temperature for growth of 30-33 °C (range 12-45 °C) and in the presence of 2-3% (w/v) NaCl (range 0.5-7%, w/v). The pH range for growth was pH 6.2-9.0, with an optimum at 6.5-7.0. Phylogenetic analysis based on 16S rRNA gene sequences demonstrated that the novel isolate was 93.3% similar to the type strain of Neptunomonas antarctica, 93.2% to Neptunomonas japonicum and 93.1% to Marinobacterium rhizophilum, the closest cultivated relatives. The polar lipid profile of the novel strain consisted of phosphatidylethanolamine, phosphatidylglycerol and some other unknown lipids. Major cellular fatty acids were summed feature 3 (C(16:1) ω7c/iso-C15:0 2-OH), C(18:1) ω7c and C(16:0) and the main respiratory quinone was Q-8. The DNA G+C content of strain HS6(T) was 61.2 mol%. Based on the phylogenetic, physiological and biochemical characteristics, strain HS6(T) represents a novel genus and species and the name Motiliproteus sediminis gen. nov., sp. nov., is proposed. The type strain is HS6(T) (=ATCC BAA-2613(T)=CICC 10858(T)).

  16. Terrilactibacillus laevilacticus gen. nov., sp. nov., isolated from soil.

    PubMed

    Prasirtsak, Budsabathip; Thongchul, Nuttha; Tolieng, Vasana; Tanasupawat, Somboon

    2016-03-01

    A Gram-stain-positive, catalase-positive, facultatively anaerobic, spore-forming, rod-shaped bacterium, strain NK26-11T, was isolated from soil in Thailand. This strain produced d-lactic acid from glucose homofermentatively, and grew at 20-45 °C and pH 5-8.5. The cell-wall peptidoglycan contained meso-diaminopimelic acid. The major respiratory quinone was menaquinone 7 (MK-7), the DNA G+C content was 42.6 mol%, and the major cellular fatty acids were anteiso-C15 : 0 and anteiso-C17 : 0. On the basis of 16S rRNA gene sequences analysis, strain NK26-11T was closely related to Bacillus solimangrovi JCM 18994T (93.89 % 16S rRNA gene sequence similarity), Pullulanibacillus naganoensis LMG 12887T (93.32 %), Sporolactobacillus inulinus NRIC 1133T (92.99 %), Tuberibacillus calidus JCM 13397T (92.98 %) and Thalassobacillus devorans DSM 16966T ( < 90.93 %). Strain NK26-11T could be clearly distinguished from the closely related genera based on phenotypic characteristics and DNA G+C content, and thus represents a novel species of a new genus between the Bacillus and Sporolactobacillus cluster, for which the name Terrilactibacillus laevilacticus gen. nov., sp. nov. is proposed. The type strain of the type species is NK26-11T ( = LMG 27803T = TISTR 2241T = PCU 335T).

  17. Cutaneous hyalohyphomycosis due to Parengyodontium album gen. et comb. nov.

    PubMed

    Tsang, Chi-Ching; Chan, Jasper F W; Pong, Wai-Mei; Chen, Jonathan H K; Ngan, Antonio H Y; Cheung, Mei; Lai, Christopher K C; Tsang, Dominic N C; Lau, Susanna K P; Woo, Patrick C Y

    2016-10-01

    "Engyodontium album" is an environmental saprobic mould and an emerging opportunistic pathogen able to cause both superficial and systemic infections. In this study, we isolated a mould from the skin lesion biopsy specimen of the right shin in a patient who received renal transplantation for end-stage renal failure with prednisolone, tacrolimus, and azathioprine immunosuppressant therapy. Histology of the skin biopsy showed mild squamous hyperplasia and neutrophilic infiltrate in the epidermis, active chronic inflammation in the dermis, and fat necrosis in the subcutis, with numerous fungal elements within the serum crusts. On Sabouraud glucose agar, the fungus grew as white, cobweb-like, floccose colonies. Microscopically, conidiogenous cells were arranged in whorls of one to seven at wide angles, with zigzag-shaped terminal fertile regions and smooth, hyaline, oval, apiculate conidia. DNA sequencing showed the mould isolate belonged to "E. album" but matrix-assisted laser desorption ionisation-time of flight mass spectrometry (MALDI-TOF MS) failed to identify the isolate. Phylogenetic analyses based on the internal transcribed spacer region, 28S nuclear ribosomal DNA, and β-tubulin gene and MALDI-TOF MS coupled with hierarchical cluster analysis showed that "E. album" is distantly related to other Engyodontium species and should be transferred to a novel genus within the family Cordycipitaceae, for which the name Parengyodontium album gen. et comb. nov. is proposed. Three potential cryptic species within this species complex were also revealed. Antifungal susceptibility testing showed posaconazole and voriconazole had high activities against all clinical P. album isolates and may be better drug options for treating P. album infections.

  18. Marinirhabdus gelatinilytica gen. nov., sp. nov., isolated from seawater.

    PubMed

    Wu, Yue-Hong; Xamxidin, Maripat; Meng, Fan-Xu; Zhang, Xin-Qi; Wang, Chun-Sheng; Tohty, Dilbar; Xu, Xue-Wei

    2016-08-01

    A Gram-stain-negative, aerobic and slightly halophilic bacterium was isolated from the South China Sea, and was subjected to characterization using a polyphasic taxonomic approach. Cells of the isolate, designated NH83T, were non-motile and rod-shaped. On the basis of 16S rRNA gene sequence analysis, strain NH83Twas closely related to members of the genera Aureisphaera (with sequence similarity of 92.9 %), Jejudonia (92.8 %), Marixanthomonas (92.6 %), Altuibacter (92.6 %), Ulvibacter (91.5-91.9 %), Gilvibacter (91.8 %) and Aequorivita (89.6-91.2 %), all of which belong to the family Flavobacteriaceae. Phylogenetic analysis indicated that it represented an independent lineage and its closest relatives belonged to the genus Marixanthomonas. The sole respiratory quinone was MK-6. The major polar lipids were phosphatidylethanolamine, two aminolipids, one aminophospholipid and one unidentified lipid. The principal fatty acids were branched fatty acids, including iso-C15 : 0, iso-C17 : 0 3-OH, iso-C16 : 0, iso-C15 : 1 G and summed feature 3 (iso-C15 : 0 2-OH and/or C16 : 1ω7c). The genomic DNA G+C content was 41.0 mol%. Strain NH83T was positive for hydrolysis of aesculin, gelatin and Tween 60. Phylogenetic distinctiveness and chemotaxonomic differences, together with differential phenotypic properties, revealed that strain NH83T could be differentiated from closely related genera. Therefore, it is proposed that strain NH83T represents a novel species in a new genus, for which the name Marinirhabdus gelatinilytica gen. nov., sp. nov. (type strain NH83T=CGMCC 1.15462T=DSM 101478T) is proposed.

  19. Air Conditioning and Refrigeration Book IV.

    ERIC Educational Resources Information Center

    Eckes, William; Fulkerson, Dan

    This publication is the concluding text in a four-part curriculum for air conditioning and refrigeration. Materials in Book 4 are designed to complement theoretical and functional elements in Books 1-3. Instructional materials in this publication are written in terms of student performance using measurable objectives. The course includes six…

  20. Fine structure histochemical study of the distribution of dipeptidylpeptidase IV (DPP IV) in the meningeal lamellae of the rat.

    PubMed

    Haninec, P; Dubovy, P

    1988-08-15

    DPP IV was localized in the meningeal lamellae of the spinal cord sheaths of the rat by light and electron microscopy. A membrane-bound reaction product of DPP IV was found in the internal, intermediate and external meningeal lamellae which delineated the CSF-filled meningeal spaces. The cells of the marginal glia displayed heterogeneous localization of the reaction product for DPP IV. DPP IV distribution in the spinal cord sheaths suggests its possible participation in the interactions of the meningeal cells with the neuropeptides in cerebrospinal fluid.

  1. A classification system for O-B2 stars based on the Si IV and C IV resonance lines

    NASA Technical Reports Server (NTRS)

    Henize, K. G.; Wray, J. D.; Parsons, S. B.

    1981-01-01

    Low-dispersion ultraviolet spectra from Skylab Experiment S-019 are used to explore the variations of Si IV and C IV line strengths with temperature and luminosity. These considerations lead to a classification system in which the Si/C ratio is used to discriminate luminosity among the O stars and temperature among the O9-B2 stars of lower luminosity. Stars falling in these two regimes may be distinguished either by the presence of C IV emission or on the basis of C IV absorption strength. The log(Si IV/C IV) vs C IV diagram is proposed as a primary tool in such a classification system. The rapid variation in the Si IV/C IV ratio from less than 1/10 at O9 to greater than 10 at B1.5 for luminosity class III-V stars appears to be an especially useful criterion for the temperature classification of stars in this spectral range.

  2. New mono-organotin (IV) dithiocarbamate complexes

    SciTech Connect

    Muthalib, Amirah Faizah Abdul; Baba, Ibrahim

    2014-09-03

    Eighteen new mono-organotin dithiocarbamate compounds derived each nine from methyltin(IV) and phenyltin(IV) reacted using in-situ method with various type of N-dialkylamine together with carbon disulphide with the ratio of 1:3:3. Elemental and gravimetric analysis showed that the general formula of these compounds were RSnCl[S{sub 2}CNR′R″]{sub 2} (R= Ph, CH{sub 3}, R′ = CH{sub 3}, C{sub 2}H{sub 5}, C{sub 7}H{sub 7} and R″ = C{sub 2}H{sub 5}, C{sub 6}H{sub 11}, iC{sub 3}H{sub 7}, C{sub 7}H{sub 7}). These compounds had been characterized by infrared spectroscopy, ultraviolet spectroscopy, {sup 1}H, {sup 13}C NMR spectroscopy and single crystal X-ray crystallography. The infrared spectra of these compounds showed three important peaks indicating the formation of dithiocarbamate compounds, ν(CN), ν(CS) and ν(Sn-S) band which present in the region of 1444–1519, 954–1098 and 318–349 cm{sup −1} respectively. The ultraviolet-visible spectra showed an absorption band for the π - π* transition of NCS group in the range of 253 – 259 nm due to the intramolecular charge transfer of the ligand. The {sup 13}C NMR spectra showed an important shift for δ(N{sup 13}CS{sub 2}) in the range of 196.8 – 201.9 ppm.. Single crystal X-ray diffraction studies showed three new structures with the general formula of PhSnCl[S{sub 2}CN(Et)(i−Pr)]{sub 2}, MeSnCl[S{sub 2}CN(Me)(Cy)]{sub 2} and MeSnCl[S{sub 2}CN(i−Pr)(CH{sub 2}Ph)]{sub 2}. All structures having a distorted octahedral geometry set by CClS{sub 4} donor atom from the two chelating dithiocarbamate ligands.

  3. Site Environmental Report for Calendar Year 2010. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

    SciTech Connect

    Liu, Ning; Rutherford, Phil; Amar, Ravnesh

    2011-09-01

    This Annual Site Environmental Report (ASER) for 2010 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, and all subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2010 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.

  4. Site Environmental Report for Calendar Year 2011. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

    SciTech Connect

    Liu, Ning; Rutherford, Phil; Dassler, David

    2012-09-01

    This Annual Site Environmental Report (ASER) for 2011 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2011 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.

  5. Site Environmental Report For Calendar Year 2012. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

    SciTech Connect

    Liu, Ning; Rutherford, Phil; Dassler, David

    2013-09-01

    This Annual Site Environmental Report (ASER) for 2012 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2012 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.

  6. Site Environmental Report for Calendar Year 2008. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

    SciTech Connect

    Liu, Ning; Rutherford, Phil; Amar, Ravnesh

    2009-09-01

    This Annual Site Environmental Report (ASER) for 2008 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988; all subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. In May 2007, the D&D operations in Area IV were suspended by the DOE. The environmental monitoring programs were continued throughout the year. Results of the radiological monitoring program for the calendar year 2008 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.

  7. Site Environmental Report for Calendar Year 2009. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

    SciTech Connect

    Liu, Ning; Rutherford, Phil; Amar, Ravnesh

    2010-09-01

    This Annual Site Environmental Report (ASER) for 2009 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, and all subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2009 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.

  8. Thermoelectric conversion efficiency in IV-VI semiconductors with reduced thermal conductivity

    NASA Astrophysics Data System (ADS)

    Ishida, Akihiro; Thao, Hoang Thi Xuan; Yamamoto, Hidenari; Kinoshita, Yohei; Ishikiriyama, Mamoru

    2015-10-01

    Mid-temperature thermoelectric conversion efficiencies of the IV-VI materials were calculated under the Boltzmann transport theory of carriers, taking the Seebeck, Peltier, and Thomson effects into account. The conversion efficiency was discussed with respect to the lattice thermal conductivity, keeping other parameters such as Seebeck coefficient and electrical conductivity to the same values. If room temperature lattice thermal conductivity is decreased up to 0.5W/mK, the conversion efficiency of a PbS based material becomes as high as 15% with the temperature difference of 500K between 800K and 300K.

  9. Modified tin(IV) oxide (M/SnO{sub 2} M = Cr, La, Pr, Nd, Sm, Gd) catalysts for the oxidation of carbon monoxide and propane

    SciTech Connect

    Harrison, P.G.; Bailey, C.; Azelee, W.

    1999-08-15

    Materials formed by the incorporation of rare earth cations (M = La, Pr, Nd, Sm, Gd) into tin(IV) oxide using coprecipitation methods show no significant enhancement of catalytic activity toward the oxidation of carbon monoxide or propane over that of tin(IV) oxide itself. For chromium-promoted tin(IV) oxide catalysts, the temperature by which complete conversion of carbon monoxide and propane occurs is dependent on both the Cr:Sn atom ratio in the catalyst and the preparative route by which the chromium is incorporated into the catalyst. As prepared all the materials are hydrous gels comprising very small (<10 nm) particles of tin(IV) oxide over which the modifying metal component appears to be dispersed uniformly. Chromium(VI) oxyanions of the types CrO{sub 4}{sup 2{minus}}, Cr{sub 2}O{sub 7}{sup 2{minus}}, and Cr{sub 3}O{sub 10}{sup 2{minus}} are sorbed on to the surface of the tin(IV) oxide particles in the freshly prepared material derived from aqueous CrO{sub 3} and tin(IV) oxide gel. Prior to calcination the materials are microporous, but significant changes in specific surface area, pore volume, and pore size occur at temperature >673 K. Powder X-ray diffraction and electron microscopy confirm the formation of Cr{sub 2}O{sub 3} on calcination at K.

  10. 32 CFR 2003.4 - Membership (Article IV).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 6 2014-07-01 2014-07-01 false Membership (Article IV). 2003.4 Section 2003.4 National Defense Other Regulations Relating to National Defense INFORMATION SECURITY OVERSIGHT OFFICE...) BYLAWS, RULES, AND APPEAL PROCEDURES Bylaws § 2003.4 Membership (Article IV). (a) Member...

  11. 32 CFR 2003.4 - Membership (Article IV).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 6 2013-07-01 2013-07-01 false Membership (Article IV). 2003.4 Section 2003.4 National Defense Other Regulations Relating to National Defense INFORMATION SECURITY OVERSIGHT OFFICE...) BYLAWS, RULES, AND APPEAL PROCEDURES Bylaws § 2003.4 Membership (Article IV). (a) Member...

  12. CDDIS Data Center Summary for the 2003 IVS Annual Report

    NASA Technical Reports Server (NTRS)

    Noll, Carey

    2004-01-01

    This report summarizes activities during the year 2003 and future plans of the Crustal Dynamics Data Information System (CDDIS) with respect to the International VLBI Service for Geodesy and Astrometry (IVS). Included in this report are background information about the CDDIS, the computer architecture, staffing supporting the system, archive contents, and future plans for the CDDIS within the IVS.

  13. Hepatocellular carcinoma in glycogen storage disease type IV

    PubMed Central

    de Moor, R A; Schweizer, J; van Hoek, B; Wasser, M; Vink, R; Maaswinkel-Mooy, P

    2000-01-01

    A 13 year old patient with juvenile type IV glycogen storage disease died of the complications of hepatocellular carcinoma. To our knowledge this is the first reported case of hepatocellular carcinoma in association with type IV glycogen storage disease.

 PMID:10833181

  14. Reducing Nitrogen Oxide Emissions: 1996 Compliance with Title IV Limits

    EIA Publications

    1998-01-01

    The purpose of this article is to summarize the existing federal nitrogen oxide (Nox) regulations and the 1996 performance of the 239 Title IV generating units. It also reviews the basics of low-Nox burner technology and presents cost and performance data for retrofits at Title IV units.

  15. Equilibrium between Different Coordination Geometries in Oxidovanadium(IV) Complexes

    ERIC Educational Resources Information Center

    Ugone, Valeria; Garribba, Eugenio; Micera, Giovanni; Sanna, Daniele

    2015-01-01

    In this laboratory activity, the equilibrium between square pyramidal and octahedral V(IV)O[superscript 2+] complexes is described. We propose a set of experiments to synthesize and characterize two types of V(IV)O[superscript 2+] complexes. The experiment allows great flexibility and may be effectively used at a variety of levels and the activity…

  16. Area 4 has layer IV in adult primates

    PubMed Central

    García-Cabezas, Miguel Ángel; Barbas, Helen

    2014-01-01

    There are opposing views about the status of layer IV in primary motor cortex (area 4). Cajal described a layer IV in area 4 of adult humans. In contrast, Brodmann found layer IV in development but not in adult primates and called area 4 ‘agranular’. We addressed this issue in rhesus monkeys using the neural marker SMI-32, which labels neurons in lower layer III and upper V, but not in layer IV. SMI-32 delineated a central unlabeled cortical stripe in area 4 that corresponds to layer IV, which was populated with small interneurons also found in layer IV in ‘granular’ areas (such as area 46). We distinguished layer IV interneurons from projection neurons in the layers above and below using cellular criteria. The commonly used term ‘agranular’ for area 4 is also used for the phylogenetically ancient limbic cortices, confusing areas that differ markedly in laminar structure. This issue pertains to the systematic variation in the architecture across cortices, traced from limbic cortices through areas with increasingly more elaborate laminar structure. The principle of systematic variation can be used to predict laminar patterns of connections across cortical systems. This principle places area 4 and agranular anterior cingulate cortices at opposite poles of the graded laminar differentiation of motor cortices. The status of layer IV in area 4 thus pertains to core organizational features of the cortex, its connections and evolution. PMID:24735460

  17. CALIBRATING C-IV-BASED BLACK HOLE MASS ESTIMATORS

    SciTech Connect

    Park, Daeseong; Woo, Jong-Hak; Shin, Jaejin; Denney, Kelly D. E-mail: woo@astro.snu.ac.kr E-mail: kelly@dark-cosmology.dk

    2013-06-20

    We present the single-epoch black hole mass estimators based on the C IV {lambda}1549 broad emission line, using the updated sample of the reverberation-mapped active galactic nuclei and high-quality UV spectra. By performing multi-component spectral fitting analysis, we measure the C IV line widths (FWHM{sub C{sub IV}} and line dispersion, {sigma}{sub C{sub IV}}) and the continuum luminosity at 1350 A (L{sub 1350}) to calibrate the C-IV-based mass estimators. By comparing with the H{beta} reverberation-based masses, we provide new mass estimators with the best-fit relationships, i.e., M{sub BH}{proportional_to}L{sub 1350}{sup 0.50{+-}0.07}{sigma}{sub C{sub IV}{sup 2}} and M{sub BH}{proportional_to}L{sub 1350}{sup 0.52{+-}0.09} FWHM{sub C{sub IV}{sup 0.56{+-}0.48}}. The new C-IV-based mass estimators show significant mass-dependent systematic difference compared to the estimators commonly used in the literature. Using the published Sloan Digital Sky Survey QSO catalog, we show that the black hole mass of high-redshift QSOs decreases on average by {approx}0.25 dex if our recipe is adopted.

  18. CDDIS Data Center Summary for the IVS 2012 Annual Report

    NASA Technical Reports Server (NTRS)

    Noll, Carey

    2013-01-01

    This report summarizes activities during 2012 and future plans of the Crustal Dynamics Data Information System (CDDIS) with respect to the International VLBI Service for Geodesy and Astrometry (IVS). Included in this report are background information about the CDDIS, the computer architecture, staff supporting the system, archive contents, and future plans for the CDDIS within the IVS.

  19. Beyond the DSM-IV: Assumptions, Alternatives, and Alterations

    ERIC Educational Resources Information Center

    Lopez, Shane J.; Edwards, Lisa M.; Pedrotti, Jennifer Teramoto; Prosser, Ellie C.; LaRue, Stephanie; Spalitto, Susan Vehige; Ulven, Jon C.

    2006-01-01

    Current diagnostic processes reflect the limitations and utility of the framework of the "Diagnostic and Statistical Manual of Mental Disorders" (4th ed.; DSM-IV; American Psychiatric Association, 1994). Clinical information in the DSM-IV's 5-axis system almost exclusively focuses on weaknesses and pathology and is summarized in a flawed…

  20. Independent Verification and Validation (IV and V) Criteria

    NASA Technical Reports Server (NTRS)

    McGill, Kenneth

    2000-01-01

    The purpose of this appendix is to establish quantifiable criteria for determining whether IV&V should be applied to a given software development. Since IV&V should begin in the Formulation Subprocess of a project, the process here described is based on metrics which are available before project approval.

  1. Apolipoprotein A-IV: a protein intimately involved in metabolism

    PubMed Central

    Wang, Fei; Kohan, Alison B.; Lo, Chun-Min; Liu, Min; Howles, Philip; Tso, Patrick

    2015-01-01

    The purpose of this review is to summarize our current understanding of the physiological roles of apoA-IV in metabolism, and to underscore the potential for apoA-IV to be a focus for new therapies aimed at the treatment of diabetes and obesity-related disorders. ApoA-IV is primarily synthesized by the small intestine, attached to chylomicrons by enterocytes, and secreted into intestinal lymph during fat absorption. In circulation, apoA-IV is associated with HDL and chylomicron remnants, but a large portion is lipoprotein free. Due to its anti-oxidative and anti-inflammatory properties, and because it can mediate reverse-cholesterol transport, proposed functions of circulating apoA-IV have been related to protection from cardiovascular disease. This review, however, focuses primarily on several properties of apoA-IV that impact other metabolic functions related to food intake, obesity, and diabetes. In addition to participating in triglyceride absorption, apoA-IV can act as an acute satiation factor through both peripheral and central routes of action. It also modulates glucose homeostasis through incretin-like effects on insulin secretion, and by moderating hepatic glucose production. While apoA-IV receptors remain to be conclusively identified, the latter modes of action suggest that this protein holds therapeutic promise for treating metabolic disease. PMID:25640749

  2. CDDIS Data Center Summary for the 2004 IVS Annual Report

    NASA Technical Reports Server (NTRS)

    Noll, Carey

    2005-01-01

    This report summarizes activities during the year 2004 and future plans of the Crustal Dynamics Data Information System (CDDIS) with respect to the International VLBI service for Geodesy and Astrometry (IVS). Included in this report are background information about the CDDIS, the computer architecture, staffing the support system, archive contents, and future plans for the CDDIS within the IVS.

  3. Adsorption of sulfur(IV) oxide by amide sorbents

    SciTech Connect

    Nikandrov, I.S.; Kogtev, S.E.; Kazimirov, O.E.; Pavlova, I.V.

    1994-04-10

    Adsorption of sulfur(IV) oxide by industrial amide plastics has been studied. Sorption capacity of the sorbents studied has been determined under static and dynamic conditions. Physical and chemical interaction has been demonstrated to take place between sulfur(IV) oxide and the sorbent studied.

  4. Analysis and Improvement of a Pseudorandom Number Generator for EPC Gen2 Tags

    NASA Astrophysics Data System (ADS)

    Melia-Segui, J.; Garcia-Alfaro, J.; Herrera-Joancomarti, J.

    The EPC Gen2 is an international standard that proposes the use of Radio Frequency Identification (RFID) in the supply chain. It is designed to balance cost and functionality. The development of Gen2 tags faces, in fact, several challenging constraints such as cost, compatibility regulations, power consumption, and performance requirements. As a consequence, security on board of Gen2 tags is often minimal. It is, indeed, mainly based on the use of on board pseudorandomness. This pseudorandomness is used to blind the communication between readers and tags; and to acknowledge the proper execution of password-protected operations. Gen2 manufacturers are often reluctant to show the design of their pseudorandom generators. Security through obscurity has always been ineffective. Some open designs have also been proposed. Most of them fail, however, to prove their correctness. We analyze a recent proposal presented in the literature and demonstrate that it is, in fact, insecure. We propose an alternative mechanism that fits the Gen2 constraints and satisfies the security requirements.

  5. Human Holliday junction resolvase GEN1 uses a chromodomain for efficient DNA recognition and cleavage

    PubMed Central

    Lee, Shun-Hsiao; Princz, Lissa Nicola; Klügel, Maren Felizitas; Habermann, Bianca; Pfander, Boris; Biertümpfel, Christian

    2015-01-01

    Holliday junctions (HJs) are key DNA intermediates in homologous recombination. They link homologous DNA strands and have to be faithfully removed for proper DNA segregation and genome integrity. Here, we present the crystal structure of human HJ resolvase GEN1 complexed with DNA at 3.0 Å resolution. The GEN1 core is similar to other Rad2/XPG nucleases. However, unlike other members of the superfamily, GEN1 contains a chromodomain as an additional DNA interaction site. Chromodomains are known for their chromatin-targeting function in chromatin remodelers and histone(de)acetylases but they have not previously been found in nucleases. The GEN1 chromodomain directly contacts DNA and its truncation severely hampers GEN1’s catalytic activity. Structure-guided mutations in vitro and in vivo in yeast validated our mechanistic findings. Our study provides the missing structure in the Rad2/XPG family and insights how a well-conserved nuclease core acquires versatility in recognizing diverse substrates for DNA repair and maintenance. DOI: http://dx.doi.org/10.7554/eLife.12256.001 PMID:26682650

  6. Safety Sufficiency for NextGen: Assessment of Selected Existing Safety Methods, Tools, Processes, and Regulations

    NASA Technical Reports Server (NTRS)

    Xu, Xidong; Ulrey, Mike L.; Brown, John A.; Mast, James; Lapis, Mary B.

    2013-01-01

    NextGen is a complex socio-technical system and, in many ways, it is expected to be more complex than the current system. It is vital to assess the safety impact of the NextGen elements (technologies, systems, and procedures) in a rigorous and systematic way and to ensure that they do not compromise safety. In this study, the NextGen elements in the form of Operational Improvements (OIs), Enablers, Research Activities, Development Activities, and Policy Issues were identified. The overall hazard situation in NextGen was outlined; a high-level hazard analysis was conducted with respect to multiple elements in a representative NextGen OI known as OI-0349 (Automation Support for Separation Management); and the hazards resulting from the highly dynamic complexity involved in an OI-0349 scenario were illustrated. A selected but representative set of the existing safety methods, tools, processes, and regulations was then reviewed and analyzed regarding whether they are sufficient to assess safety in the elements of that OI and ensure that safety will not be compromised and whether they might incur intolerably high costs.

  7. Initial Investigation of Operational Concept Elements for NASA's NextGen-Airportal Project Research

    NASA Technical Reports Server (NTRS)

    Lohr, Gary; Lee, Jonathan; Poage, James L.; Tobias, Leonard

    2009-01-01

    The NextGen-Airportal Project is organized into three research focus areas: Safe and Efficient Surface Operations, Coordinated Arrival/Departure Operations Management, and Airportal Transition and Integration Management. The content in this document was derived from an examination of constraints and problems at airports for accommodating future increases in air traffic, and from an examination of capabilities envisioned for NextGen. The concepts are organized around categories of constraints and problems and therefore do not precisely match, but generally reflect, the research focus areas. The concepts provide a framework for defining and coordinating research activities that are, and will be, conducted by the NextGen-Airportal Project. The concepts will help the research activities function as an integrated set focused on future needs for airport operations and will aid aligning the research activities with NextGen key capabilities. The concepts are presented as concept elements with more detailed sub-elements under each concept element. For each concept element, the following topics are discussed: constraints and problems being addressed, benefit descriptions, required technology and infrastructure, and an initial list of potential research topics. Concept content will be updated and more detail added as the research progresses. The concepts are focused on enhancing airportal capacity and efficiency in a timeframe 20 to 25 years in the future, which is similar to NextGen's timeframe.

  8. Conference Report: Masters Forum IV, February 2002

    NASA Technical Reports Server (NTRS)

    Post, Todd

    2002-01-01

    The purpose of the APPL Masters Forum is to bring together some of the best project managers at NASA, as well as those in industry and other government agencies, for 2 1/2 days of knowledge sharing. The project managers come eager to reflect on their project experiences, to learn new things from one another--and to unlearn a few things, too. This was the fourth Masters Forum, and the first one held outside Washington, DC. Fifty participants from across the country came to Dallas at the American Airlines Conference Center, a wonderful facility that was conveniently located by the airport and yet still seemed isolated from the rest of the world. Masters Forum IV was also the first one held during the winter. Previous Masters Forums have been during the summer. Hot, sticky Washington, D.C. in the summer may sound unpleasant, but frankly the popularity of earlier Forums is what led to this annual event becoming a semiannual one.

  9. Isolation of Bacterial Type IV Machine Subassemblies

    PubMed Central

    Sarkar, Mayukh K.; Husnain, Seyyed I.; Jakubowski, Simon J.; Christie, Peter J.

    2012-01-01

    The bacterial type IV secretion systems (T4SSs) deliver DNA and protein substrates to bacterial and eukaryotic target cells generally by a mechanism requiring direct contact between donor and target cells. Recent advances in defining the architectures of T4SSs have been made through isolation of machine sub-assemblies for further biochemical and ultrastructural analysis. Here, we describe a protocol for isolation and characterization of VirB protein complexes from the paradigmatic VirB/VirD4 T4SS of Agrobacterium tumefaciens. This protocol can be adapted for isolation of T4SS subassemblies from other gram-negative bacteria as well as gram-positive bacteria. The biological importance of isolated T4SS subcomplexes can be assessed by assaying for copurification of trapped or cross-linked substrates. This can be achieved with a modified form of the chromatin immunoprecipitation (ChIP) assay termed transfer DNA immunoprecipitation (TrIP). Here, a TrIP protocol is described for recovery of formaldehyde-cross-linked DNA substrate–channel subunit complexes from cells employing T4SSs for conjugative DNA transfer. PMID:23299736

  10. CEM data management for Title IV

    SciTech Connect

    Caiazza, R.; Rengert, D.H.

    1995-12-31

    Niagara Mohawk Power Corporation (NMPC) has developed a data management system to handle Continuous Emissions Monitoring System (CEMS) data collected to meet the requirements of Title IV of the Clean Air Act Amendments of 1990. The NMPC data management system described in this paper has three components: hardware, software, and procedures. The data management system`s hardware consists of computers and the existing wide area network system. The systems includes a Data Acquisition and Handling System (DAHS) computer at each stack, a database server at the corporate offices, a wide area network for data transfer from the DAHS to the server, a CEMS workstation, and PCs connected to the network. The second component of the system is the software. The DAHS uses a program that acquires the data and generates all the required reports. It is the only certified software. Data review, analysis and preparation for submittal is done through commercial software products and programs developed in-house. The last component, procedures, governs the flow of data from the stack to the diskette submitted under the Designated Representative`s signature. This component is included to document that all the data have been reviewed completely.

  11. LSPRAY-IV: A Lagrangian Spray Module

    NASA Technical Reports Server (NTRS)

    Raju, M. S.

    2012-01-01

    LSPRAY-IV is a Lagrangian spray solver developed for application with parallel computing and unstructured grids. It is designed to be massively parallel and could easily be coupled with any existing gas-phase flow and/or Monte Carlo Probability Density Function (PDF) solvers. The solver accommodates the use of an unstructured mesh with mixed elements of either triangular, quadrilateral, and/or tetrahedral type for the gas flow grid representation. It is mainly designed to predict the flow, thermal and transport properties of a rapidly vaporizing spray. Some important research areas covered as a part of the code development are: (1) the extension of combined CFD/scalar-Monte- Carlo-PDF method to spray modeling, (2) the multi-component liquid spray modeling, and (3) the assessment of various atomization models used in spray calculations. The current version contains the extension to the modeling of superheated sprays. The manual provides the user with an understanding of various models involved in the spray formulation, its code structure and solution algorithm, and various other issues related to parallelization and its coupling with other solvers.

  12. Feasibility study on ultralong-cycle operation and material performance for compact liquid metal-cooled fast reactors: a review work

    SciTech Connect

    Tak, Taewoo; Choe, Jiwon; Jeong, Yongjin; Lee, Deokjung; Kim, T. K.; Hong, Ser Gi

    2015-11-01

    This paper reviews the feasibility of ultralong-cycle operation on a compact liquid metal-cooled fast reactor (LMR) firstly by assessing the operation of a long-life fast reactor core and secondly by evaluating material performance in respect to both long-cycle operation and compact-size fast reactor. Many kinds of reactor concepts have been proposed, and LMR and small modular reactor (SMR) are the issued leading technologies for generation four (Gen-IV) reactor system development. The breed-and-burn strategy was proposed as a core burning strategy to operate a long cycle, and it has been evaluated in this paper with two reactor concepts: constant axial shape of neutron flux, nuclide densities, and power shape during life of energy and ultralong cycle fast reactor. In addition, Super-Safe, Small, and Simple and small modular fast reactor, compact LMR concepts, have been simulated to evaluate their long-life operation strategies. For the other practical issues, the materials for fuel, coolant, and structure have been identified and some of them are selected to have their performance optimized specifically for compact LMR with a long-cycle operation. It is believed that this comprehensive review will propose a proper direction for future reactor development and will be followed by the next step research for a complete reactor model with the other reactor components.

  13. Mechanical Properties and Microstructures of the HAZs of 11Cr F/M Steel for Gen-IV Nuclear Power Station

    NASA Astrophysics Data System (ADS)

    Li, Yongkui; Wang, Jian; Lu, Shanping; Rong, Lijian; Li, Dianzhong

    2015-02-01

    The weldability of a newly developed 11Cr ferritic/martensitic (F/M) steel to be used in Pb-Bi liquid cooled ADS for the fourth generation nuclear power station was studied by experiments and numerical simulation. In this work, an appropriate method for obtaining simulated heat-affected zones (HAZs) was developed. HAZs, including CG-HAZ, FG-HAZ, and IC-HAZ, were successfully simulated by Gleeble at heating rates of 209, 176, and 149 °C/s and peak temperatures of 1314, 1138, and 998 °C, respectively. Results of tension and impact tests indicated that the simulated HAZs had much higher strength and poorer toughness than the base metal. The poor toughness is caused by high carbon, silicon contents, and quenched martensitic microstructures. The tempering treatment is necessary for the developed steel before application in nuclear reactor.

  14. Multiaxial Creep-Fatigue and Creep-Ratcheting Failures of Grade 91 and Haynes 230 Alloys Toward Addressing Design Issues of Gen IV Nuclear Power Plants

    SciTech Connect

    Hassan, Tasnim; Lissenden, Cliff; Carroll, Laura

    2015-04-01

    The proposed research will develop systematic sets of uniaxial and multiaxial experimental data at a very high temperature (850-950°C) for Alloy 617. The loading histories to be prescribed in the experiments will induce creep-fatigue and creep-ratcheting failure mechanisms. These experimental responses will be scrutinized in order to quantify the influences of temperature and creep on fatigue and ratcheting failures. A unified constitutive model (UCM) will be developed and validated against these experimental responses. The improved UCM will be incorporated into the widely used finite element commercial software packages ANSYS. The modified ANSYS will be validated so that it can be used for evaluating the very high temperature ASME-NH design-by-analysis methodology for Alloy 617 and thereby addressing the ASME-NH design code issues.

  15. Testing and economical evaluation of U(IV) in Purex

    SciTech Connect

    Hoisington, J.E.; Hsu, T.C.

    1983-01-01

    The use of uranous nitrate, U(IV), as a plutonium reductant in the Purex solvent extraction process could significantly reduce the waste generation at the Savannah River Plant. The current reductant is a ferrous sulfamate (FS)/hydroxylamine nitrate (HAN) mixture. The iron and sulfate in the FS are major contributors to waste generation. The U(IV) reductant oxidizes to U(VI) producing no waste. The Savannah River Laboratory has developed an efficient electrochemical cell for U(IV) production and has demonstrated the effectiveness of U(IV) as a plutonium reductant. Plant tests and economic analyses are currently being conducted to determine the cost effectiveness of U(IV) implementation. The results of recent studies are presented.

  16. An Integrated Safety Assessment Methodology for Generation IV Nuclear Systems

    SciTech Connect

    Timothy J. Leahy

    2010-06-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Early work of the RSWG focused on defining a safety philosophy founded on lessons learned from current and prior generations of nuclear technologies, and on identifying technology characteristics that may help achieve Generation IV safety goals. More recent RSWG work has focused on the definition of an integrated safety assessment methodology for evaluating the safety of Generation IV systems. The methodology, tentatively called ISAM, is an integrated “toolkit” consisting of analytical techniques that are available and matched to appropriate stages of Generation IV system concept development. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time.

  17. Development of Methodologies for IV and V of Neural Networks

    NASA Technical Reports Server (NTRS)

    Taylor, Brian; Darrah, Marjorie

    2003-01-01

    Non-deterministic systems often rely upon neural network (NN) technology to "lean" to manage flight systems under controlled conditions using carefully chosen training sets. How can these adaptive systems be certified to ensure that they will become increasingly efficient and behave appropriately in real-time situations? The bulk of Independent Verification and Validation (IV&V) research of non-deterministic software control systems such as Adaptive Flight Controllers (AFC's) addresses NNs in well-behaved and constrained environments such as simulations and strict process control. However, neither substantive research, nor effective IV&V techniques have been found to address AFC's learning in real-time and adapting to live flight conditions. Adaptive flight control systems offer good extensibility into commercial aviation as well as military aviation and transportation. Consequently, this area of IV&V represents an area of growing interest and urgency. ISR proposes to further the current body of knowledge to meet two objectives: Research the current IV&V methods and assess where these methods may be applied toward a methodology for the V&V of Neural Network; and identify effective methods for IV&V of NNs that learn in real-time, including developing a prototype test bed for IV&V of AFC's. Currently. no practical method exists. lSR will meet these objectives through the tasks identified and described below. First, ISR will conduct a literature review of current IV&V technology. TO do this, ISR will collect the existing body of research on IV&V of non-deterministic systems and neural network. ISR will also develop the framework for disseminating this information through specialized training. This effort will focus on developing NASA's capability to conduct IV&V of neural network systems and to provide training to meet the increasing need for IV&V expertise in such systems.

  18. Mesoporous carbon materials

    SciTech Connect

    Dai, Sheng; Wang, Xiqing

    2012-02-14

    The invention is directed to a method for fabricating a mesoporous carbon material, the method comprising subjecting a precursor composition to a curing step followed by a carbonization step, the precursor composition comprising: (i) a templating component comprised of a block copolymer, (ii) a phenolic compound or material, (iii) a crosslinkable aldehyde component, and (iv) at least 0.5 M concentration of a strong acid having a pKa of or less than -2, wherein said carbonization step comprises heating the precursor composition at a carbonizing temperature for sufficient time to convert the precursor composition to a mesoporous carbon material. The invention is also directed to a mesoporous carbon material having an improved thermal stability, preferably produced according to the above method.

  19. GenMin: An enhanced genetic algorithm for global optimization

    NASA Astrophysics Data System (ADS)

    Tsoulos, Ioannis G.; Lagaris, I. E.

    2008-06-01

    A new method that employs grammatical evolution and a stopping rule for finding the global minimum of a continuous multidimensional, multimodal function is considered. The genetic algorithm used is a hybrid genetic algorithm in conjunction with a local search procedure. We list results from numerical experiments with a series of test functions and we compare with other established global optimization methods. The accompanying software accepts objective functions coded either in Fortran 77 or in C++. Program summaryProgram title: GenMin Catalogue identifier: AEAR_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAR_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 35 810 No. of bytes in distributed program, including test data, etc.: 436 613 Distribution format: tar.gz Programming language: GNU-C++, GNU-C, GNU Fortran 77 Computer: The tool is designed to be portable in all systems running the GNU C++ compiler Operating system: The tool is designed to be portable in all systems running the GNU C++ compiler RAM: 200 KB Word size: 32 bits Classification: 4.9 Nature of problem: A multitude of problems in science and engineering are often reduced to minimizing a function of many variables. There are instances that a local optimum does not correspond to the desired physical solution and hence the search for a better solution is required. Local optimization techniques are frequently trapped in local minima. Global optimization is hence the appropriate tool. For example, solving a nonlinear system of equations via optimization, employing a least squares type of objective, one may encounter many local minima that do not correspond to solutions (i.e. they are far from zero). Solution method: Grammatical evolution and a stopping rule. Running time: Depending on the

  20. NextGen Operations in a Simulated NY Area Airspace

    NASA Technical Reports Server (NTRS)

    Smith, Nancy M.; Parke, Bonny; Lee, Paul; Homola, Jeff; Brasil, Connie; Buckley, Nathan; Cabrall, Chris; Chevalley, Eric; Lin, Cindy; Morey, Susan; Omar, Faisal; Rein-Weston, Daphne; Yoo, Hyo-Sang

    2013-01-01

    A human-in-the-loop simulation conducted in the Airspace Operations Laboratory (AOL) at NASA Ames Research Center explored the feasibility of a Next Generation Air Transportation System (NextGen) solution to address airspace and airport capacity limitations in and around the New York metropolitan area. A week-long study explored the feasibility of a new Optimal Profile Descent (OPD) arrival into the airspace as well as a novel application of a Terminal Area Precision Scheduling and Spacing (TAPSS) enhancement to the Traffic Management Advisor (TMA) arrival scheduling tool to coordinate high volume arrival traffic to intersecting runways. In the simulation, four en route sector controllers and four terminal radar approach control (TRACON) controllers managed traffic inbound to Newark International Airport's primary runway, 22L, and its intersecting overflow runway, 11. TAPSS was used to generate independent arrival schedules for each runway and a traffic management coordinator participant adjusted the arrival schedule for each runway 11 aircraft to follow one of the 22L aircraft. TAPSS also provided controller-managed spacing tools (slot markers with speed advisories and timelines) to assist the TRACON controllers in managing the arrivals that were descending on OPDs. Results showed that the tools significantly decreased the occurrence of runway violations (potential go-arounds) when compared with a Baseline condition with no tools. Further, the combined use of the tools with the new OPD produced a peak arrival rate of over 65 aircraft per hour using instrument flight rules (IFR), exceeding the current maximum arrival rate at Newark Liberty International Airport (EWR) of 52 per hour under visual flight rules (VFR). Although the participants rated the workload as relatively low and acceptable both with and without the tools, they rated the tools as reducing their workload further. Safety and coordination were rated by most participants as acceptable in both

  1. Halopolyspora alba gen. nov., sp. nov., isolated from sediment.

    PubMed

    Lai, Hangxian; Wei, Xiaomin; Jiang, Yingying; Chen, Xiu; Li, Qinyuan; Jiang, Yi; Jiang, Chenglin; Gillerman, Leionid

    2014-08-01

    A novel halophilic, filamentous actinomycete, designated strain AFM 10251(T), was isolated from a sediment sample collected from the Dead Sea, Israel. The isolate grew with 10-35% multi-salts, and did not grow without NaCl or MgCl2. The isolate formed a white aerial mycelium, and long chains of arthrospores with more than 10 spores per chain. The spores were spherical or oval with warty surfaces, and sterile mycelium was present between individual spores. The isolate contained meso-diaminopimelic acid and a small proportion of LL-diaminopimelic acid as cell-wall diamino acids, and galactose and arabinose as whole-cell sugars. The major menaquinone was MK-9(H4). The polar lipids were diphosphatidylglycerol, phosphatidylglycerol, phosphatidylcholine, phosphatidylethanolamine, phosphatidylinositol and three unknown phospholipids. Major fatty acids were iso-C(16 : 0), iso-C(17 : 0), iso-C(15 : 0) and anteiso-C(17 : 0). The DNA G+C content of strain AFM 10251(T) was 66.7 mol%. Phylogenetic analysis based on 16S rRNA gene sequences showed that strain AFM 10251(T) and the genus Actinopolyspora formed a distinct lineage. Analysis of the secondary structures of variable areas of the 16S rRNA gene showed that strain AFM 10251(T) was different from all recognized species of the genus Actinopolyspora and members of the family Pseudonocardiaceae. Analysis of the signature nucleotides of the 16S rRNA gene showed that strain AFM 10251(T) and Actinopolyspora halophila formed a single group, but with base pair differences at positions 127 : 234 and 183 : 194. On the basis of analysis of chemical and molecular characteristics, strain AFM 10251(T) is considered to represent a novel species of a new genus in the family Actinopolysporaceae, for which the name Halopolyspora alba gen. nov., sp. nov. is proposed. The type strain of Halopolyspora alba is AFM 10251(T) ( = DSM 45976(T) = CGMCC 4.7114(T)). PMID:24860112

  2. Phosphorene as a Superior Gas Sensor: Selective Adsorption and Distinct I-V Response.

    PubMed

    Kou, Liangzhi; Frauenheim, Thomas; Chen, Changfeng

    2014-08-01

    Recent reports on the fabrication of phosphorene, that is, mono- or few-layer black phosphorus, have raised exciting prospects of an outstanding two-dimensional (2D) material that exhibits excellent properties for nanodevice applications. Here, we study by first-principles calculations the adsorption of CO, CO2, NH3, NO, and NO2 gas molecules on a monolayer phosphorene. Our results predict superior sensing performance of phosphorene that rivals or even surpasses that of other 2D materials such as graphene and MoS2. We determine the optimal adsorption positions of these molecules on the phosphorene and identify molecular doping, that is, charge transfer between the molecules and phosphorene, as the driving mechanism for the high adsorption strength. We further calculated the current-voltage (I-V) relation using the nonequilibrium Green's function (NEGF) formalism. The transport features show large (1-2 orders of magnitude) anisotropy along different (armchair or zigzag) directions, which is consistent with the anisotropic electronic band structure of phosphorene. Remarkably, the I-V relation exhibits distinct responses with a marked change of the I-V relation along either the armchair or the zigzag directions depending on the type of molecules. Such selectivity and sensitivity to adsorption makes phosphorene a superior gas sensor that promises wide-ranging applications.

  3. Spectrophotometric determination of zirconium(IV) and hafnium(IV) with 1-(2'thiazolylazo)-2-naphthol

    SciTech Connect

    Eshwar, M.C.; Sharma, C.D.

    1987-11-10

    1-(2'-thiazolylazo)-2-naphthol (TAN) reacts with zirconium(IV) and hafnium(IV) in acid media to form sparingly soluble 1:4 red-colored chelates, which are dissolved in 40 and 32% methanol (v/v) respectively. The complex of Hf(IV) is stable only in the presence of sodium dodecylsulfate (0.1%, w/v), which also increases the sensitivity of the system. The Zr(IV)-TAN and Hf(IV)-TAN and Hf(IV)-TAN complexes exhibit maximum absorbance at 600 and 580 nm, obey Beer's law in the concentration ranges 0.04-2.88 and 0.8-2.60 ..mu..g/ml of Zr(IV) and Hf(IV), have molar absorptivities of 5.25 x 10/sup 4/ and 3.43 x 10/sup 4/ liter x mole/sup -1/ x cm/sup -1/, Sandell sensitivities 2.0 and 5.0 ng x cm/sup 12/, and coefficients of variation +/-1.40 and +/-1.06 respectively.

  4. Actinide Corroles: Synthesis and Characterization of Thorium(IV) and Uranium(IV) bis(-chloride) Dimers

    SciTech Connect

    Ward, Ashleigh L.; Buckley, Heather L.; Gryko, Daniel T.; Lukens, Wayne W.; Arnold, John

    2013-12-01

    The first synthesis and structural characterization of actinide corroles is presented. Thorium(IV) and uranium(IV) macrocycles of Mes2(p-OMePh)corrole were synthesised and characterized by single-crystal X-ray diffraction, UV-Visible spectroscopy, variable-temperature 1H NMR, ESI mass spectrometry and cyclic voltammetry.

  5. Expanding the Ecological Validity of WAIS-IV and WMS-IV with the Texas Functional Living Scale

    ERIC Educational Resources Information Center

    Drozdick, Lisa Whipple; Cullum, C. Munro

    2011-01-01

    Assessment of functional status is an important aspect of clinical evaluation. As part of the standardization of the Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV) and Wechsler Memory Scale-Fourth Edition (WMS-IV), participants completed the Texas Functional Living Scale (TFLS), a measure of Instrumental Activities of Daily Living. The…

  6. HIV gp120 vaccine - VaxGen: AIDSVAX, AIDSVAX B/B, AIDSVAX B/E, HIV gp120 vaccine - Genentech, HIV gp120 vaccine AIDSVAX - VaxGen, HIV vaccine AIDSVAX - VaxGen.

    PubMed

    2003-01-01

    VaxGen is developing prophylactic vaccines against HIV-1 consisting of two recombinant gp120 surface proteins from different HIV-1 strains.This profile has been selected from R&D Insight, a pharmaceutical intelligence database produced by Adis International Ltd. The bivalent vaccines [AIDSVAX B/B and AIDSVAX B/E] are being evaluated in two phase III trials. The first multicentre phase III trial of AIDSVAX B/B, was conducted principally in Canada and the US but also at some sites in the Netherlands and Puerto Rico. The trial was completed at the end of 2002. The second phase III trial is being conducted in Thailand with the AIDSVAX B/E vaccine. VaxGen announced in July 2002 that it would be delaying its Biologics License Application (BLA) for AIDSVAX until 2004 to enable the company to fulfil pre-approval manufacturing requirements. AIDSVAX is based on an earlier monovalent gp120 vaccine developed by Genentech that was shown to be safe in humans. VaxGen (formerly Genenvax) was formed as a spin-off company from Genentech with the sole purpose of developing the gp120 vaccine. VaxGen announced in July 2002 that the original License and Supply agreement with Genentech, signed in May 1997, had been amended. Under the revised agreement, Genentech maintains its right to market and sell AIDSVAX in North America, but has relinquished its options to commercialise the vaccine candidate in the rest of the world. Genentech's earlier decision to waive its option to manufacture AIDSVAX has also been formalised in this agreement. Additionally, VaxGen's royalty payments to Genentech for sales to the WHO or UN for underdeveloped nations have also been reduced by up to 50% and Genentech has extended the milestone date associated with VaxGen submitting an NDA. A $US120 million joint venture (Celltrion) has been formed between VaxGen and South Korean investors to manufacture more than 200 million doses of AIDSVAX a year. Celltrion will build and operate two biotechnology manufacturing

  7. Scintigraphy of the salivary glands in Sjögen's syndrome.

    PubMed Central

    Arrago, J P; Rain, J D; Brocheriou, C; Rocher, F

    1987-01-01

    Scintigraphy of the salivary glands with technetium-sodium pertechnetate (99mTc) was undertaken on 320 patients with oral dryness or connective tissue disease using a computer assisted method that gave quantitative results about the major salivary gland function. Compared with clinical and histological data, scintigraphy provides a sensitive method, even though it is not specific, for detecting minimal injuries to salivary glands in patients suspected of having Sjögen's syndrome. Moreover, it might differentiate between the Sjögen-like syndrome and the sequelae of radiotherapy in patients with bone marrow graft. Scintigraphy of the major salivary glands could therefore form part of the routine investigation of patients with Sjögen's syndrome. PMID:2828435

  8. Titanium(IV) and vitamin C: aqueous complexes of a bioactive form of Ti(IV).

    PubMed

    Buettner, Katherine M; Collins, Joseph M; Valentine, Ann M

    2012-10-15

    Ascorbic acid is among the biorelevant ligands that render Ti(IV) stable in aqueous solution. A series of pH-dependent titanium(IV) coordination complexes of L-ascorbic acid is described. Directed by spectropotentiometric methods, important aspects of the aqueous interactions in this system are investigated, including ligand binding mode, pH-dependent metal-ligand stoichiometry, and the importance of metal ion-promoted hydrolysis and the binding of hydroxide. Stability constants are determined for all metal ion-ligand-proton complexes by a process of model optimization and nonlinear least-squares fitting of the combined spectropotentiometric titration data to the log β(MLH) values in the model. A speciation diagram is generated from the set of stability constants described in the model. In the range pH 3-10, the aqueous speciation is characterized by the sequential appearance of the following complexes as a function of added base: Ti(asc)(2)(0) → Ti(asc)(3)(2-) → Ti(asc)(2)(OH)(2)(2-) → Ti(asc)(OH)(4)(2-). These species dominate the speciation at pH < 3, pH 4-5, pH ~ 8, and pH > 10, respectively, with minimum log stability constants (β values) of 25.70, 36.91, 16.43, and -6.91. Results from electrospray mass spectrometry, metal-ligand binding experiments, and kinetics measurements support the speciation, which is characterized by bidentate chelation of the ascorbate dianion to the titanium(IV) ion via proton displacement, and a pH-dependent metal-ligand binding motif of ligand addition followed by metal ion-promoted hydrolysis, stepwise ligand dissociation, and the concomitant binding of hydroxide ion. Additionally, the kinetics of ligand exchange of titanium ascorbate with citrate are reported to understand better the possible fate of titanium ascorbate under biologically relevant conditions.

  9. From yellow to black: dramatic changes between cerium(IV) and plutonium(IV) molybdates.

    PubMed

    Cross, Justin N; Duncan, Patrick M; Villa, Eric M; Polinski, Matthew J; Babo, Jean-Marie; Alekseev, Evgeny V; Booth, Corwin H; Albrecht-Schmitt, Thomas E

    2013-02-20

    Hydrothermal reactions of CeCl(3) and PuCl(3) with MoO(3) and Cs(2)CO(3) yield surprisingly different results. Ce(3)Mo(6)O(24)(H(2)O)(4) crystallizes as bright yellow plates (space group C2/c, a = 12.7337(7) Å, b = 22.1309(16) Å, c = 7.8392(4) Å, β = 96.591(4)°, V = 2194.6(2) Å(3)), whereas CsPu(3)Mo(6)O(24)(H(2)O) crystallizes as semiconducting black-red plates (space group C2/c, a = 12.633(5) Å, b = 21.770(8) Å, c = 7.743(7) Å, β = 96.218(2)°, V = 2117(2) Å(3)). The topologies of the two compounds are similar, with channel structures built from disordered Mo(VI) square pyramids and (RE)O(8) square antiprisms (RE = Ce(IV), Pu(IV)). However, the Pu(IV) compound contains Cs(+) in its channels, while the channels in Ce(3)Mo(6)O(24)(H(2)O)(4) contain water molecules. Disorder and an ambiguous oxidation state of Mo lead to the formula CsPu(3)Mo(6)O(24)(H(2)O), where one Mo site is Mo(V) and the rest are Mo(VI). X-ray absorption near-edge structure (XANES) experiments were performed to investigate the source of the black color of CsPu(3)Mo(6)O(24)(H(2)O). These experiments revealed Pu to be tetravalent, while the strong pre-edge absorption from the distorted molybdate anions leaves the oxidation state ambiguous between Mo(V) and Mo(VI). PMID:23360299

  10. The Crystal and Molecular Structure of Acetatochlorobis(4-methylpyridine)oxovanadium (IV)

    NASA Technical Reports Server (NTRS)

    Schupp, John D.; Hepp, Aloysius F.; Duraj, Stan A.; Richman, Robert M.; Fanwick, Phillip E.; Hakimzadeh, Roshanak (Technical Monitor)

    2001-01-01

    The crystal and molecular structure of the title compound, VOCl(O2CCH3)(4-CH3C5H4N)2, has been determined by single-crystal x-ray diffraction. The material crystallizes in the space group P 1(bar) (#2) with a = 7.822(2), b = 8.023(l), c = 14.841(2) Angstroms, alpha = 99.73(l), beta = 91.41(l), and gamma = 117.13(l). The coordination geometry around the vanadium is a highly distorted octahedron. The molecule is remarkable for being a monomeric oxovanadium (IV) carboxylate. A generalized synthetic strategy is proposed for the preparation of oxovanadium (IV) monomers.

  11. Intercombinations and Allowed Transitions in O IV

    NASA Astrophysics Data System (ADS)

    Brage, Tomas; Judge, P. G.; Brekke, P.

    1996-06-01

    We report on large-scale ab initio multiconfiguration Hartree-Fock calculations for important multiplets including the UV 0.01 multiplet, 2s22p2PJ-2s2p2 4Pj', in O IV. The resulting transition probabilities should be accurate to ±5%-10% for intersystem lines and 1% or better for permitted lines. We present new calculations of line emission coefficients using these transition probabilities and collisional rate coefficients published by Zhang, Graziani, & Pradhan in 1994. We readdress the use of these lines as diagnostics of electron densities, paying particular attention to uncertainties in density determinations. We find (1) the absolute uncertainties in derived densities are difficult to assess, but are at least ±40% controlled by uncertainties in collision strengths; (2) our new calculations bring observed and computed line ratios into better agreement (earlier papers yielding systematically different densities make the agreement worse); (3) there is additional evidence for strong blends in the 1404.8 emission feature, as argued by other authors, and/or evidence for inaccurate laboratory wavelengths; and (4) the computed branching ratios are in good agreement with observed ratios to within observational uncertainties of ±7%. We determine electron densities in a variety of solar features from HRTS data from the first and second flights of this instrument. The derived electron densities vary remarkably little between quiet Sun network and active regions, but resonance line intensities vary dramatically, and we discuss reasons for this. Finally, we discuss how new high-quality data from the SUMER instrument to be flown on Solar and Heliosphereic Observatory (SO HO) could be used to address outstanding problems concerning blends and heating of the solar transition region.

  12. Intermetallic communication in titanium(IV) ferrocenyldiketonates.

    PubMed

    Dulatas, Lea T; Brown, Seth N; Ojomo, Edema; Noll, Bruce C; Cavo, Matthew J; Holt, Paul B; Wopperer, Matthew M

    2009-11-16

    A tetradentate bis(ferrocenyldiketonate) ligand, Fc(2)BobH(2), is prepared via Claisen condensation of acetylferrocene and 2,2'-biphenyldiacetyl chloride, and is metalated with titanium(IV) isopropoxide to give (Fc(2)Bob)Ti(O(i)Pr)(2) in good yield. The isopropoxide groups are replaced with di(4-nitrophenyl)phosphate groups on treatment with the corresponding acid, and with chlorides on treatment with trimethylsilyl chloride. Metathesis with catechol leads to the bis(o-hydroxyphenoxide) complex rather than the chelating catecholate complex. Hydrolysis selectively gives the mu-oxo trimer (Delta,Delta,Delta)/(Lambda,Lambda,Lambda)-{(Fc(2)Bob)Ti(mu-O)}(3). The solid-state structures of the mu-oxo trimer and the bis(o-hydroxyphenoxide) complex show that the ferrocene substituents are oriented proximal to the biphenyl backbone rather than pointed out toward the exogenous groups. The complexes show dramatic changes in color depending on the bound anions, ranging from the red isopropoxide (lambda(max) = 489 nm) to the green bis(di(4-nitrophenyl)phosphate) (lambda(max) = 653 nm). The oxidation potentials of the ferrocenes show modest shifts based on the titanium environment, but the redox potentials of the two ferrocenes are never separated by more than 60 mV. These results and those of density-functional theory (DFT) calculations indicate that the titanium interacts principally with the lowest unoccupied molecular orbital (LUMO) of the ferrocenyldiketonate and very little with its highest occupied molecular orbital (HOMO).

  13. Group IV photonics for the mid infrared

    NASA Astrophysics Data System (ADS)

    Soref, Richard

    2013-02-01

    This paper outlines the challenges and benefits of applying silicon-based photonic techniques in the 2 to 5 μm midinfrared (MIR) wavelength range for chem.-bio-physical sensing, medical diagnostics, industrial process control, environmental monitoring, secure communications, Ladar, active imaging, and high-speed communications at 2 μm. Onchip passive and active components, mostly waveguided, will enable opto-electronic CMOS or BiCMOS integrated "circuits" for system-on-a-chip applications such as spectroscopy and lab-on-a-chip. Volume manufacture in a silicon foundry is expected to yield low-cost (or even disposable) chips with benefits in size-weight-power and ruggedness. This is "long-wavelength optoelectronic integration on silicon" which we call LIOS. Room temperature operation appears feasible, albeit with performance compromises at 4 to 5 μm. In addition to the electronics layer (which may include RF wireless), a 3-D LIOS chip can include several inter-communicating layers utilizing the photonic, plasmonic, photoniccrystal and opto-electro-mechanical technologies. The LIOS challenge can be met by (1) discovering new physics, (2) employing "new" IV and III-V alloys, (3) scaling-up and modifying telecom components, and (4) applying nonlinearoptical wavelength conversion in some cases. This paper presents proposals for MIR chip spectrometers employing frequency-comb and Ge blackbody sources. Active heterostructures employing Si, Ge, SiGe, GeSn and SiGeSn are key for laser diodes, photodetectors, LEDs, switches, amplifiers, and modulators that provide totally monolithic foundry integration, while numerous III-V semiconductor MIR devices within the InGaAsSb and InGaAsP families offer practical hybrid integration on Si PICs. Interband cascade and quantum cascade lasers on Ge waveguides are important in this context.

  14. SIPSMetGen: It's Not Just For Aircraft Data and ECS Anymore.

    NASA Astrophysics Data System (ADS)

    Schwab, M.

    2015-12-01

    The SIPSMetGen utility, developed for the NASA EOSDIS project, under the EED contract, simplified the creation of file level metadata for the ECS System. The utility has been enhanced for ease of use, efficiency, speed and increased flexibility. The SIPSMetGen utility was originally created as a means of generating file level spatial metadata for Operation IceBridge. The first version created only ODL metadata, specific for ingest into ECS. The core strength of the utility was, and continues to be, its ability to take complex shapes and patterns of data collection point clouds from aircraft flights and simplify them to a relatively simple concave hull geo-polygon. It has been found to be a useful and easy to use tool for creating file level metadata for many other missions, both aircraft and satellite. While the original version was useful it had its limitations. In 2014 Raytheon was tasked to make enhancements to SIPSMetGen, this resulted a new version of SIPSMetGen which can create ISO Compliant XML metadata; provides optimization and streamlining of the algorithm for creating the spatial metadata; a quicker runtime with more consistent results; a utility that can be configured to run multi-threaded on systems with multiple processors. The utility comes with a java based graphical user interface to aid in configuration and running of the utility. The enhanced SIPSMetGen allows more diverse data sets to be archived with file level metadata. The advantage of archiving data with file level metadata is that it makes it easier for data users, and scientists to find relevant data. File level metadata unlocks the power of existing archives and metadata repositories such as ECS and CMR and search and discovery utilities like Reverb and Earth Data Search. Current missions now using SIPSMetGen include: Aquarius, Measures, ARISE, and Nimbus.

  15. Collecting and Interpreting Qualitative Materials. Third Edition

    ERIC Educational Resources Information Center

    Denzin, Norman K., Ed.; Lincoln, Yvonna, Ed.

    2007-01-01

    This book is the third volume of the paperback versions of "The SAGE Handbook of Qualitative Research, Third Edition." This portion of the handbook considers the tasks of collecting, analyzing, and interpreting empirical materials, and comprises the Handbook's Parts IV ("Methods of Collecting and Analyzing Empirical Materials") and V ("The Art and…

  16. The soft, fluctuating UVB at z ˜ 6 as traced by C IV, Si IV, and C II

    NASA Astrophysics Data System (ADS)

    Finlator, Kristian; Oppenheimer, B. D.; Davé, Romeel; Zackrisson, E.; Thompson, Robert; Huang, Shuiyao

    2016-07-01

    The sources that drove cosmological reionization left clues regarding their identity in the slope and inhomogeneity of the ultraviolet ionizing background (UVB): bright quasars (QSOs) generate a hard UVB with predominantly large-scale fluctuations while Population II stars generate a softer one with smaller scale fluctuations. Metal absorbers probe the UVB's slope because different ions are sensitive to different energies. Likewise, they probe spatial fluctuations because they originate in regions where a galaxy-driven UVB is harder and more intense. We take a first step towards studying the reionization-epoch UVB's slope and inhomogeneity by comparing observations of 12 metal absorbers at z ˜ 6 versus predictions from a cosmological hydrodynamic simulation using three different UVBs: a soft, spatially inhomogeneous `galaxies+QSOs' UVB; a homogeneous `galaxies+QSOs' UVB, and a `QSOs-only' model. All UVBs reproduce the observed column density distributions of C II, Si IV, and C IV reasonably well although high-column, high-ionization absorbers are underproduced, reflecting numerical limitations. With upper limits treated as detections, only a soft, fluctuating UVB reproduces both the observed Si IV/C IV and C II/C IV distributions. The QSOs-only UVB overpredicts both C IV/C II and C IV/Si IV, indicating that it is too hard. The Haardt & Madau (2012) UVB underpredicts C IV/Si IV, suggesting that it lacks amplifications near galaxies. Hence current observations prefer a soft, fluctuating UVB as expected from a predominantly Population II background although they cannot rule out a harder one. Future observations probing a factor of 2 deeper in metal column density will distinguish between the soft, fluctuating and QSOs-only UVBs.

  17. Hydrolysis of Np(IV) and Pu(IV) and Their Complexation by Aqueous Orthosilicic Acid Si(OH)4

    SciTech Connect

    Yusov, A B.; Fedoseev, A M.; Delegard, Calvin H.

    2004-12-10

    The hydrolysis and interaction of Np(IV) and Pu(IV) with orthosilicic acid, Si(OH)4, were studied in 0.1-1.0 M ionic strength aqueous solutions. Spectrophotometry was used to study these reactions at about 10-4 M Np(IV) and Pu(IV) concentrations. The first hydrolysis constants, Khydr, agree with the majority of earlier spectrophotometric and potentiometric data. The absorption spectra of NpOH3+ and PuOH3+ were obtained by spectral deconvolution. Reasons to explain the overestimation of Khydr obtained by other methods [by extraction of trace amounts of Np(IV) and Pu(IV) and by solubility] are discussed. Formation of the complexes NpOSi(OH)33+ and PuOSi(OH)33+ is demonstrated in the p[H+] range 1.4-2.1 and 0.7-1.4, respectively. Measured values of equilibrium constants of the reaction M4+ + Si(OH)4 ? MOSi(OH)33+ + H+ at ionic strength I=1.0 are log ?1 = 0.41?0.02 and 1.04?0.04, respectively, for Np(IV) and Pu(IV). The stability constants of the NpOSi(OH)33+ and PuOSi(OH)33+ complexes, recalculated to zero ionic strength, are log ?10 = 11.2 and 11.8, respectively. The correlation between Khydr and ?1, as observed for all earlier studied metal ions, also occurs for both Np(IV) and Pu(IV).

  18. Structure activity relationship modelling of milk protein-derived peptides with dipeptidyl peptidase IV (DPP-IV) inhibitory activity.

    PubMed

    Nongonierma, Alice B; FitzGerald, Richard J

    2016-05-01

    Quantitative structure activity type models were developed in an attempt to predict the key features of peptide sequences having dipeptidyl peptidase IV (DPP-IV) inhibitory activity. The models were then employed to help predict the potential of peptides, which are currently reported in the literature to be present in the intestinal tract of humans following milk/dairy product ingestion, to act as inhibitors of DPP-IV. Two models (z- and v-scale) for short (2-5 amino acid residues) bovine milk peptides, behaving as competitive inhibitors of DPP-IV, were developed. The z- and the v-scale models (p<0.05, R(2) of 0.829 and 0.815, respectively) were then applied to 56 milk protein-derived peptides previously reported in the literature to be found in the intestinal tract of humans which possessed a structural feature of DPP-IV inhibitory peptides (P at the N2 position). Ten of these peptides were synthetized and tested for their in vitro DPP-IV inhibitory properties. There was no agreement between the predicted and experimentally determined DPP-IV half maximal inhibitory concentrations (IC50) for the competitive peptide inhibitors. However, the ranking for DPP-IV inhibitory potency of the competitive peptide inhibitors was conserved. Furthermore, potent in vitro DPP-IV inhibitory activity was observed with two peptides, LPVPQ (IC50=43.8±8.8μM) and IPM (IC50=69.5±8.7μM). Peptides present within the gastrointestinal tract of human may have promise for the development of natural DPP-IV inhibitors for the management of serum glucose.

  19. Thermoelectric materials having porosity

    SciTech Connect

    Heremans, Joseph P.; Jaworski, Christopher M.; Jovovic, Vladimir; Harris, Fred

    2014-08-05

    A thermoelectric material and a method of making a thermoelectric material are provided. In certain embodiments, the thermoelectric material comprises at least 10 volume percent porosity. In some embodiments, the thermoelectric material has a zT greater than about 1.2 at a temperature of about 375 K. In some embodiments, the thermoelectric material comprises a topological thermoelectric material. In some embodiments, the thermoelectric material comprises a general composition of (Bi.sub.1-xSb.sub.x).sub.u(Te.sub.1-ySe.sub.y).sub.w, wherein 0.ltoreq.x.ltoreq.1, 0.ltoreq.y.ltoreq.1, 1.8.ltoreq.u.ltoreq.2.2, 2.8.ltoreq.w.ltoreq.3.2. In further embodiments, the thermoelectric material includes a compound having at least one group IV element and at least one group VI element. In certain embodiments, the method includes providing a powder comprising a thermoelectric composition, pressing the powder, and sintering the powder to form the thermoelectric material.

  20. Massilibacterium senegalense gen. nov., sp. nov., a new bacterial genus isolated from the human gut

    PubMed Central

    Tidjani Alou, M.; Rathored, J.; Lagier, J.-C.; Khelaifia, S.; Labas, N.; Sokhna, C.; Diallo, A.; Raoult, D.; Dubourg, G.

    2016-01-01

    Massilibacterium senegalense gen. nov., sp. nov., strain mt8T, is the type strain of Massilibacterium gen. nov., a new genus within the Bacillaceae family. This Gram-negative facultative anaerobic rod was isolated from the gut microbiota of a severely malnourished boy. Its phenotypic description is hereby presented with a complete annotation of its genome sequence. This genome is 5 697 950 bp long and contains 5615 protein-coding genes and 178 RNA genes, among which are 40 rRNA genes. PMID:26933503

  1. 78 FR 49507 - OriGen Energy LLC ; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-14

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission OriGen Energy LLC ; Supplemental Notice That Initial Market-Based Rate...-referenced proceeding of OriGen Energy LLC's application for market-based rate authority, with...

  2. 77 FR 56839 - GenOn Marsh Landing, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-14

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission GenOn Marsh Landing, LLC; Supplemental Notice That Initial Market-Based Rate...-referenced proceeding, of GenOn Marsh Landing, LLC's application for market-based rate authority, with...

  3. 75 FR 80487 - Cambria CoGen Company; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-22

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Cambria CoGen Company; Supplemental Notice That Initial Market- Based Rate... notice in the above-referenced proceeding of Cambria CoGen Company's application for market-based...

  4. 75 FR 35018 - GenConn Energy LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-21

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission GenConn Energy LLC; Supplemental Notice That Initial Market-Based Rate... notice in the above-referenced proceeding of GenConn Energy LLC's application for market-based...

  5. Discourses in Conflict: The Relationship between Gen Y Pre-Service Teachers, Digital Technologies and Lifelong Learning

    ERIC Educational Resources Information Center

    Donnison, Sharn

    2009-01-01

    This paper analyses Gen Y pre-service primary school teachers' conceptualisations of lifelong learning. It is situated within a context of improving the provision and delivery of pre-service teacher education. This paper argues that Gen Y's understanding of lifelong learning has been influenced by their engagements with digital technologies and…

  6. 75 FR 1052 - Terra-Gen Dixie Valley, LLC; TGP Dixie Development Company, LLC; New York Canyon, LLC; Notice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-08

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Terra-Gen Dixie Valley, LLC; TGP Dixie Development Company, LLC; New York Canyon, LLC; Notice of Filing December 30, 2009. Take notice that on December 24, 2009, Terra-Gen...

  7. 78 FR 77670 - AlphaGen Power LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-24

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission AlphaGen Power LLC; Supplemental Notice That Initial Market-Based Rate...-referenced proceeding, of AlphaGen Power LLC's application for market-based rate authority, with...

  8. Complete cDNAs from Brachymyrmex patagonicus (Hymenoptera: Formicidae). --GenBank accession numbers: GU582126-GU582140.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    15 new gene sequences were identified from workers of Brachymyrmex patagonicus, and submitted to the National Center for Biotechnology Information GenBank. GenBank accession numbers are GU582126-GU582140. This information will provide scientists with genetic tools to study the development and the p...

  9. Dissimilatory Fe(III) and Mn(IV) reduction.

    PubMed Central

    Lovley, D R

    1991-01-01

    The oxidation of organic matter coupled to the reduction of Fe(III) or Mn(IV) is one of the most important biogeochemical reactions in aquatic sediments, soils, and groundwater. This process, which may have been the first globally significant mechanism for the oxidation of organic matter to carbon dioxide, plays an important role in the oxidation of natural and contaminant organic compounds in a variety of environments and contributes to other phenomena of widespread significance such as the release of metals and nutrients into water supplies, the magnetization of sediments, and the corrosion of metal. Until recently, much of the Fe(III) and Mn(IV) reduction in sedimentary environments was considered to be the result of nonenzymatic processes. However, microorganisms which can effectively couple the oxidation of organic compounds to the reduction of Fe(III) or Mn(IV) have recently been discovered. With Fe(III) or Mn(IV) as the sole electron acceptor, these organisms can completely oxidize fatty acids, hydrogen, or a variety of monoaromatic compounds. This metabolism provides energy to support growth. Sugars and amino acids can be completely oxidized by the cooperative activity of fermentative microorganisms and hydrogen- and fatty-acid-oxidizing Fe(III) and Mn(IV) reducers. This provides a microbial mechanism for the oxidation of the complex assemblage of sedimentary organic matter in Fe(III)- or Mn(IV)-reducing environments. The available evidence indicates that this enzymatic reduction of Fe(III) or Mn(IV) accounts for most of the oxidation of organic matter coupled to reduction of Fe(III) and Mn(IV) in sedimentary environments. Little is known about the diversity and ecology of the microorganisms responsible for Fe(III) and Mn(IV) reduction, and only preliminary studies have been conducted on the physiology and biochemistry of this process. PMID:1886521

  10. Long-Term IQ Stability Using the WISC-IV and WAIS-IV among a Sample of Special Education Students

    ERIC Educational Resources Information Center

    Spector, Hayley

    2013-01-01

    The present study investigated the stability of scores on the WISC-IV and WAIS-IV over an approximate six-year period. Previous research using older versions of the WISC and WAIS have suggested that these scales demonstrate strong stability of scores. Since research that has compared the stability of scores between the WISC-IV and the WAIS-IV is…

  11. Studies in Mathematics, Volume IV. Geometry.

    ERIC Educational Resources Information Center

    Kutuzov, B. V.

    This book is a translation of a Russian text. The translation is exact, and the language used by the author has not been brought up to date. The volume is probably most useful as a source of supplementary materials for high school mathematics. It is also useful for teachers to broaden their mathematical background. Chapters included in the text…

  12. Construction Cluster Volume IV: [Concrete Work].

    ERIC Educational Resources Information Center

    Pennsylvania State Dept. of Justice, Harrisburg. Bureau of Correction.

    The document is the fourth of a series, to be integrated with a G.E.D. program, containing instructional materials for the construction cluster. The volume focuses on concrete work and consists of 20 instructional units which require a month of study. The units include: (1) uses of concrete and occupational information; (2) soils, drainage, and…

  13. Interdisciplinary Traffic Safety Instructional System: Series IV.

    ERIC Educational Resources Information Center

    Maryland State Dept. of Education, Baltimore.

    Directions and materials for approximately 110 fourth grade level trafic safety learning activities, intended to develop the perceptual skills of young pedestrians and to train fourth grade students in safe conduct on the school bus, on bicycles, in an auto and in the school environment, are provided. Safety concepts and skills are taught through…

  14. Chitinozoan faunas from the Rügen Ordovician (Rügen 5/66 and Binz 1/73 wells), NE Germany.

    PubMed

    Samuelsson, J; Verniers, J; Vecoli, M

    2000-12-01

    The island of Rügen (NE Germany), situated close to the Trans-European Suture Zone (TESZ), in the southern Baltic Sea is underlain by sedimentary rocks of an Early Palaeozoic age, known only from boreholes. The wells, Rügen 5/66 and Binz 1/73, were investigated for their chitinozoan assemblages to improve the earlier biostratigraphic dating (graptolites and acritarchs) and to facilitate comparisons with other chitinozoan assemblages on both sides of the TESZ. In the lower part of the Rügen 5/66 core (3794.7-3615.8m), Lagenochitina destombesi Elaouad-Debbaj is indicative of an early late Tremadoc age. In the upper part of the same well (3287.3-1709.7m), the observed chitinozoan taxa suggest an age spanning the early Llanvirn to the Caradoc. The entire sampled interval of the Binz 1/73 core (5217.6-5041.8m) is interpreted as belonging to the Siphonochitina formosa Biozone (early-early late Abereiddian, corresponding to the early Llanvirn). The chitinozoan data corroborate the earlier suggested biostratigraphic ages, based on acritarchs and graptolites. The chitinozoans from the Binz 1/73 well point to a high latitude provenance of the investigated host sediments at time of deposition.

  15. Ehlers-Danlos Syndrome Type IV with Bilateral Pneumothorax.

    PubMed

    Nakagawa, Hiroaki; Wada, Hiroshi; Hajiro, Takashi; Nagao, Taishi; Ogawa, Emiko; Hatamochi, Atsushi; Tanaka, Toshihiro; Nakano, Yasutaka

    2015-01-01

    A 17-year-old teen was hospitalized with bilateral pneumothorax. After the bilateral lungs were expanded using catheter tubes, he fully recovered and he was discharged from our hospital. He had a history of colon perforation. Ehlers-Danlos syndrome (EDS) was suspected due to the combination of colon perforation and pneumothorax, and EDS type IV was confirmed after a genetic study identified a c.1511g>a mutation in the COL3A1 gene. This is the first report of bilateral pneumothorax caused by EDS type IV. Clinicians should consider EDS type IV in the differential diagnosis for bilateral pneumothorax in conjunction with distinct previous histories and radiological findings.

  16. Spectrophotometric determination of uranium(IV) with Arsenazo III

    SciTech Connect

    Baumann, E.W.

    1980-07-01

    A spectrophotometric procedure was developed for determining U(IV) in the presence of U(VI) by forming a colored complex with Arsenazo III in 4M HCl. The results compare satisfactorily with U(IV) determinations by ceric titration. Total uranium can be determined after reduction of U(VI) with metallic zinc. The concentration range for the absorbance cell solution is 0 to 2 ..mu..g U(IV)/mL. Other tetravalent ions, such as thorium, zirconium, hafnium, plutonium, and neptunium, will interfere.

  17. Purification and characterization of Eikenella corrodens type IV pilin.

    PubMed Central

    Hood, B L; Hirschberg, R

    1995-01-01

    Eikenella corrodens is a gram-negative human pathogen associated with periodontal diseases and soft-tissue infections. Pilin was purified by association-dissociation and fast protein liquid chromatography; it had an apparent molecular mass of about 14.8 kDa and an N-terminal amino acid sequence reflective of type IV pilins. Antibodies to the purified protein reacted with pili on whole cells. This is the first report of purification of type IV pili/pilin from this organism. Other type IV pili are important virulence factors; we are currently investigating the biological role of pili in E. corrodens. PMID:7642307

  18. Safety of i.v. administration of redback spider antivenom.

    PubMed

    Isbister, G K

    2007-12-01

    It is unclear what the risk of allergic reactions is with appropriately given dilute i.v. redback spider antivenom (RBSAV). Ninety-five i.v. administrations of RBSAV referred from January 2001 to November 2006 were reviewed. All patients had local pain, 72% radiating pain, 57% diaphoresis and 39% systemic effects. Four patients (4%) had immediate systemic hypersensitivity reactions: none were severe, one was moderate and three mild. In 32 patients followed up for 2 weeks, three (10%) developed serum sickness. RBSAV given i.v. had a low reaction rate.

  19. Type material in the NCBI Taxonomy Database

    PubMed Central

    Federhen, Scott

    2015-01-01

    Type material is the taxonomic device that ties formal names to the physical specimens that serve as exemplars for the species. For the prokaryotes these are strains submitted to the culture collections; for the eukaryotes they are specimens submitted to museums or herbaria. The NCBI Taxonomy Database (http://www.ncbi.nlm.nih.gov/taxonomy) now includes annotation of type material that we use to flag sequences from type in GenBank and in Genomes. This has important implications for many NCBI resources, some of which are outlined below. PMID:25398905

  20. Development of a High Fidelity System Analysis Code for Generation IV Reactors

    SciTech Connect

    Hongbin Zhang; Vincent Mousseau; Haihua Zhao

    2008-06-01

    Traditional nuclear reactor system analysis codes such as RELAP and TRAC employ an operator split methodology. In this approach, each of the physics (fluid flow, heat conduction and neutron diffusion) is solved separately and the coupling terms are done explicitly. This approach limits accuracy (first order in time at best) and makes the codes slow in running since the explicit coupling imposes stability restrictions on the time step size. These codes have been extensively tested and validated for the existing LWRs. However, for GEN IV nuclear reactor designs which tend to have long lasting transients resulting from passive safety systems, the performance is questionable and modern high fidelity simulation tools will be required. The requirement for accurate predictability is the motivation for a large scale overhaul of all of the models and assumptions in transient nuclear reactor safety simulation software. At INL we have launched an effort with the long term goal of developing a high fidelity system analysis code that employs modern physical models, numerical methods, and computer science for transient safety analysis of GEN IV nuclear reactors. Modern parallel solution algorithms will be employed through utilizing the nonlinear solution software package PETSc developed by Argonne National Laboratory. The physical models to be developed will have physically realistic length scales and time scales. The solution algorithm will be based on the physics-based preconditioned Jacobian-free Newton-Krylov solution methods. In this approach all of the physical models are solved implicitly and simultaneously in a single nonlinear system. This includes the coolant flow, nonlinear heat conduction, neutron kinetics, and thermal radiation, etc. Including modern physical models and accurate space and time discretizations will allow the simulation capability to be second order accurate in space and in time. This paper presents the current status of the development efforts as

  1. PREFACE: Progress in Nonequilibrium Green's Functions IV

    NASA Astrophysics Data System (ADS)

    Bonitz, Michael; Balzer, Karsten

    2010-04-01

    This is the fourth volume1 of articles on the theory of Nonequilibrium Green's functions (NEGF) and their modern application in various fields such as plasma physics, semiconductor physics, molecular electronics and high energy physics. It contains 23 articles written by experts in many-body theory and quantum transport who summarize recent progress in their respective area of research. The articles are based on talks given at the interdisciplinary conference Progress in Nonequilibrium Green's functions IV which was held 17-21 August 2009 at the University of Glasgow, Scotland. This conference continues the tradition of the previous meetings which started in 1999 and which aimed at an informal exchange across field boundaries. The previous meetings and the earlier proceedings proved to be very stimulating not only for young researchers but also for experienced scientists, and we are convinced that this fourth volume will be as successful as the previous ones. As before, this volume includes only extended review-type papers which are written in a way that they are understandable to a broad interdisciplinary audience. All papers published in this volume of Journal of Physics: Conference Series have been peer reviewed through processes administrated by the Editors assuring highest scientific standards. In the review process some papers were substantially revised and improved and some were rejected. This conference would not have been possible without the remarkable work of the local organizing team around John Barker and Scott Roy and the generous financial support from the University of Glasgow and the Deutsche Forschungsgemeinschaft via SFB-Transregio 24. Michael Bonitz and Karsten Balzer Kiel, February 2010 1 The first two volumes are Progress in Nonequilibrium Green's functions, M Bonitz (ed) and Progress in Nonequilibrium Green's functions II, M Bonitz and D Semkat (eds), which were published by World Scientific (Singapore), in 2000 and 2003, respectively (ISBN

  2. Complexes with Tunable Intramolecular Ferrocene to Ti(IV) Electronic Transitions: Models for Solid State Fe(II) to Ti(IV) Charge Transfer.

    PubMed

    Turlington, Michael D; Pienkos, Jared A; Carlton, Elizabeth S; Wroblewski, Karlee N; Myers, Alexis R; Trindle, Carl O; Altun, Zikri; Rack, Jeffrey J; Wagenknecht, Paul S

    2016-03-01

    Iron(II)-to-titanium(IV) metal-to-metal-charge transfer (MMCT) is important in the photosensitization of TiO2 by ferrocyanide, charge transfer in solid-state metal-oxide photocatalysts, and has been invoked to explain the blue color of sapphire, blue kyanite, and some lunar material. Herein, a series of complexes with alkynyl linkages between ferrocene (Fc) and Ti(IV) has been prepared and characterized by UV-vis spectroscopy and electrochemistry. Complexes with two ferrocene substituents include Cp2Ti(C2Fc)2, Cp*2Ti(C2Fc)2, and Cp2Ti(C4Fc)2. Complexes with a single ferrocene utilize a titanocene with a trimethylsilyl derivatized Cp ring, (TMS)Cp, and comprise the complexes (TMS)Cp2Ti(C2Fc)(C2R), where R = C6H5, p-C6H4CF3, and CF3. The complexes are compared to Cp2Ti(C2Ph)2, which lacks the second metal. Cyclic voltammetry for all complexes reveals a reversible Ti(IV/III) reduction wave and an Fe(II/III) oxidation that is irreversible for all complexes except (TMS)Cp2Ti(C2Fc)(C2CF3). All of the complexes with both Fc and Ti show an intense absorption (4000 M(-1)cm(-1) < ε < 8000 M(-1)cm(-1)) between 540 and 630 nm that is absent in complexes lacking a ferrocene donor. The energy of the absorption tracks with the difference between the Ti(IV/III) and Fe(III/II) reduction potentials, shifting to lower energy as the difference in potentials decreases. Reorganization energies, λ, have been determined using band shape analysis (2600 cm(-1) < λ < 5300 cm(-1)) and are in the range observed for other donor-acceptor complexes that have a ferrocene donor. Marcus-Hush-type analysis of the electrochemical and spectroscopic data are consistent with the assignment of the low-energy absorption as a MMCT band. TD-DFT analysis also supports this assignment. Solvatochromism is apparent for the MMCT band of all complexes, there being a bathochromic shift upon increasing polarizability of the solvent. The magnitude of the shift is dependent on both the electron density at Ti(IV

  3. Complexes with Tunable Intramolecular Ferrocene to Ti(IV) Electronic Transitions: Models for Solid State Fe(II) to Ti(IV) Charge Transfer.

    PubMed

    Turlington, Michael D; Pienkos, Jared A; Carlton, Elizabeth S; Wroblewski, Karlee N; Myers, Alexis R; Trindle, Carl O; Altun, Zikri; Rack, Jeffrey J; Wagenknecht, Paul S

    2016-03-01

    Iron(II)-to-titanium(IV) metal-to-metal-charge transfer (MMCT) is important in the photosensitization of TiO2 by ferrocyanide, charge transfer in solid-state metal-oxide photocatalysts, and has been invoked to explain the blue color of sapphire, blue kyanite, and some lunar material. Herein, a series of complexes with alkynyl linkages between ferrocene (Fc) and Ti(IV) has been prepared and characterized by UV-vis spectroscopy and electrochemistry. Complexes with two ferrocene substituents include Cp2Ti(C2Fc)2, Cp*2Ti(C2Fc)2, and Cp2Ti(C4Fc)2. Complexes with a single ferrocene utilize a titanocene with a trimethylsilyl derivatized Cp ring, (TMS)Cp, and comprise the complexes (TMS)Cp2Ti(C2Fc)(C2R), where R = C6H5, p-C6H4CF3, and CF3. The complexes are compared to Cp2Ti(C2Ph)2, which lacks the second metal. Cyclic voltammetry for all complexes reveals a reversible Ti(IV/III) reduction wave and an Fe(II/III) oxidation that is irreversible for all complexes except (TMS)Cp2Ti(C2Fc)(C2CF3). All of the complexes with both Fc and Ti show an intense absorption (4000 M(-1)cm(-1) < ε < 8000 M(-1)cm(-1)) between 540 and 630 nm that is absent in complexes lacking a ferrocene donor. The energy of the absorption tracks with the difference between the Ti(IV/III) and Fe(III/II) reduction potentials, shifting to lower energy as the difference in potentials decreases. Reorganization energies, λ, have been determined using band shape analysis (2600 cm(-1) < λ < 5300 cm(-1)) and are in the range observed for other donor-acceptor complexes that have a ferrocene donor. Marcus-Hush-type analysis of the electrochemical and spectroscopic data are consistent with the assignment of the low-energy absorption as a MMCT band. TD-DFT analysis also supports this assignment. Solvatochromism is apparent for the MMCT band of all complexes, there being a bathochromic shift upon increasing polarizability of the solvent. The magnitude of the shift is dependent on both the electron density at Ti(IV

  4. Lack of negative slope in I-V plots for BK channels at positive potentials in the absence of intracellular blockers.

    PubMed

    Geng, Yanyan; Wang, Xiaoyu; Magleby, Karl L

    2013-04-01

    Large-conductance, voltage- and Ca(2+)-activated K(+) (BK) channels display near linear current-voltage (I-V) plots for voltages between -100 and +100 mV, with an increasing sublinearity for more positive potentials. As is the case for many types of channels, BK channels are blocked at positive potentials by intracellular Ca(2+) and Mg(2+). This fast block progressively reduces single-channel conductance with increasing voltage, giving rise to a negative slope in the I-V plots beyond about +120 mV, depending on the concentration of the blockers. In contrast to these observations of pronounced differences in the magnitudes and shapes of I-V plots in the absence and presence of intracellular blockers, Schroeder and Hansen (2007. J. Gen. Physiol. http://dx.doi.org/10.1085/jgp.200709802) have reported identical I-V plots in the absence and presence of blockers for BK channels, with both plots having reduced conductance and negative slopes, as expected for blockers. Schroeder and Hansen included both Ca(2+) and Mg(2+) in the intracellular solution rather than a single blocker, and they also studied BK channels expressed from α plus β1 subunits, whereas most previous studies used only α subunits. Although it seems unlikely that these experimental differences would account for the differences in findings between previous studies and those of Schroeder and Hansen, we repeated the experiments using BK channels comprised of α plus β1 subunits with joint application of 2.5 mM Ca(2+) plus 2.5 mM Mg(2+), as Schroeder and Hansen did. In contrast to the findings of Schroeder and Hansen of identical I-V plots, we found marked differences in the single-channel I-V plots in the absence and presence of blockers. Consistent with previous studies, we found near linear I-V plots in the absence of blockers and greatly reduced currents and negative slopes in the presence of blockers. Hence, studies of conductance mechanisms for BK channels should exclude intracellular Ca(2+)/Mg(2

  5. Thermo-Acidic Pretreatment of Beach Macroalgae from Rügen to Optimize Biomethane Production—Double Benefit with Simultaneous Bioenergy Production and Improvement of Local Beach and Waste Management

    PubMed Central

    Barbot, Yann Nicolas; Thomsen, Laurenz; Benz, Roland

    2015-01-01

    Eutrophication is a phenomenon which can rapidly generate masses of marine macroalgae, particularly in areas with high nutrient pollution. Washed ashore, this biomass impairs coastal tourism and negatively affects the coastal ecosystem. The present study evaluates the biochemical methane potential (BMP) of a macroalgae mix (Rügen-Mix, RM (RM = Rügen-Mix)) originating from Rügen, Germany. To improve biomethane recovery, thermo-acidic pretreatment was applied to the biomass prior to biomethanation to disintegrate the biomass macrostructure. Acid hydrolysis was successfully triggered with 0.2 M industry-grade HCl at 80 °C for a 2 h period, increasing biomethane recovery by +39%, with a maximum BMP of 121 mL·g−1 volatile solids (VS). To reduce the necessity for input material, HCl was replaced by the acidic waste product flue gas condensate (FGC). Improved performance was achieved by showing an increase in biomethane recovery of +24% and a maximum BMP of 108 mL·g−1 VS. Continuous anaerobic digestion trials of RM were conducted for three hydraulic retention times, showing the feasibility of monodigestion. The biomethane recovery was 60 mL and 65 mL·g−1 VS·d−1 for thermophilic and mesophilic operation, respectively. The quality of biomethanation performance aligned to the composition of the source material which exhibited a low carbon/nitrogen ratio and an increased concentration of sulfur compounds. PMID:26404327

  6. Site Environmental Report for Calendar Year 2013. DOE Operations at The Boeing Company, Santa Susana Field Laboratory, Area IV

    SciTech Connect

    2014-06-30

    This Annual Site Environmental Report (ASER) for 2013 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of the Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2013 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling. Due to the suspension of D&D activities in Area IV, no effluents were released into the atmosphere during 2013. Therefore, the potential radiation dose to the general public through airborne release was zero. Similarly, the radiation dose to an offsite member of the public (maximally exposed individual) due to direct radiation from SSFL is indistinguishable from background. All radioactive wastes are processed for disposal at DOE disposal sites and/or other licensed sites approved by DOE for radioactive waste

  7. Synthesis and regeneration of lead (IV) acetate

    SciTech Connect

    Boyle, T.J.; Al-Shareef, H.N.; Moore, G.J.

    1996-11-01

    Lead acetate [Pb(O{sub 2}CMe){sub 4}] was easily synthesized from a warm solution of Pb{sub 3}O{sub 4}, HO{sub 2}CMe and O(OCMe){sub 2} following literature preparations when the appropriate measures to minimize water contamination were followed. Furthermore, Pb(O{sub 2}CMe){sub 4} which has been decomposed (evidenced by the appearance of a purple color due to oxidation) can be regenerated using a similar preparatory route. Introduction of Pb(O{sub 2}CMe){sub 4} from the two routes outlined above into the IMO process for production of PZT thin films gave films with comparable ferroelectric properties to commercially available Pb(O{sub 2}CMe){sub 4} precursors. However, the freshly synthesized material yields PZT films with better properties compared to the recycled material.

  8. Results From a Parametric Acoustic Liner Experiment Using P and W GEN1 HSR Mixer/Ejector Model

    NASA Technical Reports Server (NTRS)

    Boyd, Kathleen C.; Wolter, John D.

    2004-01-01

    This report documents the results of an acoustic liner test performed using a Gen 1 HSR mixer/ejector model installed on the Jet Exit Rig in the Nozzle Acoustic Test Rig in the Aeroacoustic Propulsion Laboratory or NASA Glenn Research Center. Acoustic liner effectiveness and single-component thrust performance results are discussed. Results from 26 different types of single-degree-of-freedom and bulk material liners are compared with each other and against a hardwall baseline. Design parameters involving all aspects of the facesheet, the backing cavity, and the type of bulk material were varied in order to study the effects of these design features on the acoustic impedance, acoustic effectiveness and on nozzle thrust performance. Overall, the bulk absorber liners are more effective at reducing the jet noise than the single-degree-of-freedom liners. Many of the design parameters had little effect on acoustic effectiveness, such as facesheeet hole diameter and honeycomb cell size. A relatively large variation in the impedance of the bulk absorber in a bulk liner is required to have a significant impact on the noise reduction. The thrust results exhibit a number of consistent trends, supporting the validity of this new addition to the facility. In general, the thrust results indicate that thrust performance benefits from increased facesheet thickness and decreased facesheet porosity.

  9. Hafnium(IV) tetratriflate as a glycosyl fluoride activation reagent.

    PubMed

    Manabe, Shino; Ito, Yukishige

    2013-05-01

    Hafnium(IV) tetratriflate was found to be a good activator of glycosyl fluoride. The protocol was operationally simple and was widely applicable to a variety of substrates in both solid-phase and solution-phase glycosylation reactions.

  10. Mandelazo I as a reagent for Zr(IV) determination

    SciTech Connect

    Rakha, T.H.; Filip, P.; Stefan, N.

    1984-01-01

    A spectrometric study of the reaction of the Zr(IV) ions with Mandelazo I was carried out. Absorption spectra revealed that the maximum absorption of the zirconium compound appears at a wavelength (316 nm) different from the maxima of the reagent (253 and 390 nm). Beer-Lambert law is followed for zirconium concentrations of the order of 8.8 x 10/sup -5/ M (i.e. 8 ..mu..g Zr(IV)/mL). Possible interferences of ions such as Be(II), Cu(II), Zn(II), Al(III), Th(IV), U(VI), Mn(II), Fe(III), Co(II) and Ni(II) were investigated in connection with some masking agents such as SO/sub 4//sup 2 -/ and C/sub 2/O/sub 4//sup 2 -/. Also, the solid state Zr(IV)- Mandelazo I compound was prepared and characterized by nitrogen and thermogravimetric analyses.

  11. History into Drama: The Perspective of "1 Henry IV."

    ERIC Educational Resources Information Center

    Champion, Larry S.

    1978-01-01

    Contrasts Shakespeare's "Henry V" and "Henry IV" series, in which human interaction becomes history, with plays such as "Julius Caesar," which focus on psychological analysis and the internalized protagonist. (MB)

  12. 28. Photocopy of engineering drawing. CASTOR IV MODIFICATIONS LAUNCH COMPLEX ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. Photocopy of engineering drawing. CASTOR IV MODIFICATIONS LAUNCH COMPLEX 17A: LEVEL 1A PLATFORMS-STRUCTURAL, 1973. - Cape Canaveral Air Station, Launch Complex 17, Facility 28416, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  13. 29. Photocopy of engineering drawing. CASTOR IV MODIFICATIONS LAUNCH COMPLEX ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. Photocopy of engineering drawing. CASTOR IV MODIFICATIONS LAUNCH COMPLEX 17A: LEVEL 17A PLATFORMS-STRUCTURAL, 1973. - Cape Canaveral Air Station, Launch Complex 17, Facility 28416, East end of Lighthouse Road, Cape Canaveral, Brevard County, FL

  14. Complexation of Plutonium (IV) with Fluoride at Variable Temperatures

    SciTech Connect

    Xia, Yuanxian; Rao, Linfeng; Friese, Judah I.; Moore, Dean A.; Bachelor, Paula P.

    2010-02-02

    The complexation of Pu(IV) with fluoride at elevated temperatures was studied by solvent extraction technique. A solution of NaBrO3 was used as holding oxidant to maintain the oxidation state of plutonium throughout the experiments. The distribution ratio of Pu(IV) between the organic and aqueous phases was found to decrease as the concentrations of fluoride were increased. Stability constants of the 1:1 and 1:2 Pu(IV)-F- complexes, dominant in the aqueous phase under the experimental conditions, were calculated from the effect of fluoride ions on the distribution ratio. The thermodynamic parameters, including enthalpy and entropy of complexation between Pu(IV) and fluoride at 25 degrees C - 55 degrees C were calculated from the stability constants at different temperatures by using the Van’t Hoff equation.

  15. Report for 2012 from the Bordeaux IVS Analysis Center

    NASA Technical Reports Server (NTRS)

    Charlot, Patrick; Bellanger, Antoine; Bouffet, Romuald; Bourda, Geraldine; Collioud, Arnaud; Baudry, Alain

    2013-01-01

    This report summarizes the activities of the Bordeaux IVS Analysis Center during the year 2012. The work focused on (i) regular analysis of the IVS-R1 and IVS-R4 sessions with the GINS software package; (ii) systematic VLBI imaging of the RDV sessions and calculation of the corresponding source structure index and compactness values; (iii) investigation of the correlation between astrometric position instabilities and source structure variations; and (iv) continuation of our VLBI observational program to identify optically-bright radio sources suitable for the link with the future Gaia frame. Also of importance is the 11th European VLBI Network Symposium, which we organized last October in Bordeaux and which drew much attention from the European and International VLBI communities.

  16. Complexation of Plutonium (IV) With Sulfate At Variable Temperatures

    SciTech Connect

    Y. Xia; J.I. Friese; D.A> Moore; P.P. Bachelor; L. Rao

    2006-10-05

    The complexation of plutonium(IV) with sulfate at variable temperatures has been investigated by solvent extraction method. A NaBrO{sub 3} solution was used as holding oxidant to maintain the plutonium(IV) oxidation state throughout the experiments. The distribution ratio of Pu(IV) between the organic and aqueous phases was found to decrease as the concentrations of sulfate were increased. Stability constants of the 1:1 and 1:2 Pu(IV)-HSO{sub 4}{sup -} complexes, dominant in the aqueous phase, were calculated from the effect of [HSO{sub 4}{sup -}] on the distribution ratio. The enthalpy and entropy of complexation were calculated from the stability constants at different temperatures using the Van't Hoff equation.

  17. A gilled mushroom, Gerontomyces lepidotus gen. et sp. nov. (Basidiomycota: Agaricales), in Baltic amber.

    PubMed

    Poinar, George

    2016-09-01

    A densely scaled small mushroom in Baltic amber is described as Gerontomyces lepidotus gen. et sp. nov. and is characterized by a convex pileus 1.0 mm in diameter, distant to subdistant lamellae with smooth margins and a centrally inserted cylindrical, solid stipe. Its taxonomic placement is uncertain. This is the first mushroom described from Baltic amber. PMID:27567715

  18. Acantholachesilla gen. n. (Psocodea:'Psocoptera': Lachesillidae: Eolachesillinae: Graphocaeciliini) from Valle del Cauca, Colombia.

    PubMed

    Aldrete, Alfonso N García; Manchola, Oscar Fernando Saenz; Obando, Ranulfo González

    2014-06-25

    Acantholachesilla saltoensis gen. et sp. n. is described from Valle del Cauca, Colombia, in the Lachesillidae, tribe Graphocaeciliini (Eolachesillinae). The genus is related to Dagualachesilla and Dagualachesilloides that occur in the same area, differing from them in the male clunial projection, phallosome, and female subgenital plate and gonapophyses.

  19. pGenN, a Gene Normalization Tool for Plant Genes and Proteins in Scientific Literature

    PubMed Central

    Ding, Ruoyao; Arighi, Cecilia N.; Lee, Jung-Youn; Wu, Cathy H.; Vijay-Shanker, K.

    2015-01-01

    Background Automatically detecting gene/protein names in the literature and connecting them to databases records, also known as gene normalization, provides a means to structure the information buried in free-text literature. Gene normalization is critical for improving the coverage of annotation in the databases, and is an essential component of many text mining systems and database curation pipelines. Methods In this manuscript, we describe a gene normalization system specifically tailored for plant species, called pGenN (pivot-based Gene Normalization). The system consists of three steps: dictionary-based gene mention detection, species assignment, and intra species normalization. We have developed new heuristics to improve each of these phases. Results We evaluated the performance of pGenN on an in-house expertly annotated corpus consisting of 104 plant relevant abstracts. Our system achieved an F-value of 88.9% (Precision 90.9% and Recall 87.2%) on this corpus, outperforming state-of-art systems presented in BioCreative III. We have processed over 440,000 plant-related Medline abstracts using pGenN. The gene normalization results are stored in a local database for direct query from the pGenN web interface (proteininformationresource.org/pgenn/). The annotated literature corpus is also publicly available through the PIR text mining portal (proteininformationresource.org/iprolink/). PMID:26258475

  20. Gen Y Recruitment: Understanding Graduate Intentions to Join an Organisation Using the Theory of Planned Behaviour

    ERIC Educational Resources Information Center

    Warmerdam, Amanda; Lewis, Ioni; Banks, Tamara

    2015-01-01

    Purpose: Using the Theory of Planned Behaviour (TPB) framework, the purpose of this paper is to explore whether the standard TPB constructs explained variance in Generation Y (Gen Y) individuals' intentions to join their ideal organisation. Design/methodology/approach: A mixed methods approach was used featuring qualitative and quantitative…