Boundary-layer equations in generalized curvilinear coordinates
NASA Technical Reports Server (NTRS)
Panaras, Argyris G.
1987-01-01
A set of higher-order boundary-layer equations is derived valid for three-dimensional compressible flows. The equations are written in a generalized curvilinear coordinate system, in which the surface coordinates are nonorthogonal; the third axis is restricted to be normal to the surface. Also, higher-order viscous terms which are retained depend on the surface curvature of the body. Thus, the equations are suitable for the calculation of the boundary layer about arbitrary vehicles. As a starting point, the Navier-Stokes equations are derived in a tensorian notation. Then by means of an order-of-magnitude analysis, the boundary-layer equations are developed. To provide an interface between the analytical partial differentiation notation and the compact tensor notation, a brief review of the most essential theorems of the tensor analysis related to the equations of the fluid dynamics is given. Many useful quantities, such as the contravariant and the covariant metrics and the physical velocity components, are written in both notations.
Recent Updates to the CFD General Notation System (CGNS)
NASA Technical Reports Server (NTRS)
Rumsey, Christopher L.; Wedan, Bruce; Hauser, Thomas; Poinot, Marc
2012-01-01
The CFD General Notation System (CGNS) - a general, portable, and extensible standard for the storage and retrieval of computational fluid dynamics (CFD) analysis data has been in existence for more than a decade (Version 1.0 was released in May 1998). Both structured and unstructured CFD data are covered by the standard, and CGNS can be easily extended to cover any sort of data imaginable, while retaining backward compatibility with existing CGNS data files and software. Although originally designed for CFD, it is readily extendable to any field of computational analysis. In early 2011, CGNS Version 3.1 was released, which added significant capabilities. This paper describes these recent enhancements and highlights the continued usefulness of the CGNS methodology.
A 3D generic inverse dynamic method using wrench notation and quaternion algebra.
Dumas, R; Aissaoui, R; de Guise, J A
2004-06-01
In the literature, conventional 3D inverse dynamic models are limited in three aspects related to inverse dynamic notation, body segment parameters and kinematic formalism. First, conventional notation yields separate computations of the forces and moments with successive coordinate system transformations. Secondly, the way conventional body segment parameters are defined is based on the assumption that the inertia tensor is principal and the centre of mass is located between the proximal and distal ends. Thirdly, the conventional kinematic formalism uses Euler or Cardanic angles that are sequence-dependent and suffer from singularities. In order to overcome these limitations, this paper presents a new generic method for inverse dynamics. This generic method is based on wrench notation for inverse dynamics, a general definition of body segment parameters and quaternion algebra for the kinematic formalism.
The Astronomy Workshop: Scientific Notation and Solar System Visualizer
NASA Astrophysics Data System (ADS)
Deming, Grace; Hamilton, D.; Hayes-Gehrke, M.
2008-09-01
The Astronomy Workshop (http://janus.astro.umd.edu) is a collection of interactive World Wide Web tools that were developed under the direction of Doug Hamilton for use in undergraduate classes and by the general public. The philosophy of the site is to foster student interest in astronomy by exploiting their fascination with computers and the internet. We have expanded the "Scientific Notation” tool from simply converting decimal numbers into and out of scientific notation to adding, subtracting, multiplying, and dividing numbers expressed in scientific notation. Students practice these skills and when confident they may complete a quiz. In addition, there are suggestions on how instructors may use the site to encourage students to practice these basic skills. The Solar System Visualizer animates orbits of planets, moons, and rings to scale. Extrasolar planetary systems are also featured. This research was sponsored by NASA EPO grant NNG06GGF99G.
Alternatives to Traditional Notation.
ERIC Educational Resources Information Center
Gaare, Mark
1997-01-01
Provides a introduction and overview to alternative music notation systems. Describes guitar tablature, accordion tablature, klavarskribo (a keyboard notational system developed by Cornelius Pot, a Dutch engineer), and the digital piano roll. Briefly discusses the history of notation reform and current efforts. Includes examples from scores. (MJP)
The relativistic equations of stellar structure and evolution
NASA Technical Reports Server (NTRS)
Thorne, K. S.
1975-01-01
The general relativistic equations of stellar structure and evolution are reformulated in a notation which makes easy contact with Newtonian theory. A general relativistic version of the mixing-length formalism for convection is presented. It is argued that in work on spherical systems, general relativity theorists have identified the wrong quantity as total mass-energy inside radius r.
Speechant: A Vowel Notation System to Teach English Pronunciation
ERIC Educational Resources Information Center
dos Reis, Jorge; Hazan, Valerie
2012-01-01
This paper introduces a new vowel notation system aimed at aiding the teaching of English pronunciation. This notation system, designed as an enhancement to orthographic text, was designed to use concepts borrowed from the representation of musical notes and is also linked to the acoustic characteristics of vowel sounds. Vowel timbre is…
Using Design Principles to Consider Representation of the Hand in Some Notation Systems
ERIC Educational Resources Information Center
Hochgesang, Julie A.
2014-01-01
Linguists have long recognized the descriptive limitations of Stokoe notation, currently the most commonly used system for phonetic or phonological transcription, but continue using it because of its widespread influence (e.g., Siedlecki and Bonvillian, 2000). With the emergence of newer notation systems, the field will benefit from a discussion…
NASA Technical Reports Server (NTRS)
Sirlin, Samuel W.
1993-01-01
Eight-page report describes systems of notation used most commonly to represent tensors of various ranks, with emphasis on tensors in Cartesian coordinate systems. Serves as introductory or refresher text for scientists, engineers, and others familiar with basic concepts of coordinate systems, vectors, and partial derivatives. Indicial tensor, vector, dyadic, and matrix notations, and relationships among them described.
The Moon System Adapted for Musical Notation.
ERIC Educational Resources Information Center
Jackson, Michael
1987-01-01
A means is presented for using William Moon's embossed symbols to represent musical notation for blind individuals, as an alternative to braille notation. The proposed system includes pitch symbols, octave indicators, duration symbols, accidentals, key signatures, rests, stress symbols, ornaments, and other symbols. (Author/JDD)
Representing object oriented specifications and designs with extended data flow notations
NASA Technical Reports Server (NTRS)
Buser, Jon Franklin; Ward, Paul T.
1988-01-01
The issue of using extended data flow notations to document object oriented designs and specifications is discussed. Extended data flow notations, for the purposes here, refer to notations that are based on the rules of Yourdon/DeMarco data flow analysis. The extensions include additional notation for representing real-time systems as well as some proposed extensions specific to object oriented development. Some advantages of data flow notations are stated. How data flow diagrams are used to represent software objects are investigated. Some problem areas with regard to using data flow notations for object oriented development are noted. Some initial solutions to these problems are proposed.
ERIC Educational Resources Information Center
Hochgesang, Julie A.
2013-01-01
In my dissertation, I examine four notation systems used to represent hand configurations in child acquisition of signed languages. Linguists have long recognized the descriptive limitations of Stokoe notation, currently the most commonly used system for phonetic or phonological transcription, but continue using it because of its widespread…
Linking Different Cultures by Computers: A Study of Computer-Assisted Music Notation Instruction.
ERIC Educational Resources Information Center
Chen, Steve Shihong; Dennis, J. Richard
1993-01-01
Describes a study that investigated the feasibility of using computers to teach music notation systems to Chinese students, as well as to help Western educators study Chinese music and its number notation system. Topics discussed include students' learning sequences; HyperCard software; hypermedia and graphic hypertext indexing; and the…
ERIC Educational Resources Information Center
Khosh-khui, Abolghasem
This study investigates the degree of relationship between scientific and technical subject headings and their corresponding class notations in the Dewey Decimal (DDC) and Library of Congress Classification (LCC) systems. The degree of association between a subject heading and its corresponding class of notation or notations is measured by…
Helping System Engineers Bridge the Peaks
NASA Technical Reports Server (NTRS)
Rungta, Neha; Tkachuk, Oksana; Person, Suzette; Biatek, Jason; Whalen, Michael W.; Castle, Joseph; Castle, JosephGundy-Burlet, Karen
2014-01-01
In our experience at NASA, system engineers generally follow the Twin Peaks approach when developing safety-critical systems. However, iterations between the peaks require considerable manual, and in some cases duplicate, effort. A significant part of the manual effort stems from the fact that requirements are written in English natural language rather than a formal notation. In this work, we propose an approach that enables system engineers to leverage formal requirements and automated test generation to streamline iterations, effectively "bridging the peaks". The key to the approach is a formal language notation that a) system engineers are comfortable with, b) is supported by a family of automated V&V tools, and c) is semantically rich enough to describe the requirements of interest. We believe the combination of formalizing requirements and providing tool support to automate the iterations will lead to a more efficient Twin Peaks implementation at NASA.
ERIC Educational Resources Information Center
Skapski, George J.
As an innovative aid to the study of music, recordings were made of musical performances and later synchronized with musical notations. To make the structures of the music more readily visible, and after experimenting with the use of staff notation, the author-developed "Nota-Graph" notation system was used. In this notation, there are…
A Proposal of a Color Music Notation System on a Single Melody for Music Beginners
ERIC Educational Resources Information Center
Kuo, Yi-Ting; Chuang, Ming-Chuen
2013-01-01
Music teachers often encounter obstructions in teaching beginners in music reading. Conventional notational symbols require beginners to spend significant amount of time in memorizing, which discourages learning at early stage. This article proposes a newly-developed color music notation system that may improve the recognition of the staff and the…
Recombinative Generalization: An Exploratory Study in Musical Reading
Perez, William Ferreira; de Rose, Julio C
2010-01-01
The present study aimed to extend the findings of recombinative generalization research in alphabetical reading and spelling to the context of musical reading. One participant was taught to respond discriminatively to six two-note sequences, choosing the corresponding notation on the staff in the presence of each sequence. When novel three- and four-note sequences were presented, she selected the corresponding notation. These results suggest the generality of previous research to the context of musical teaching. PMID:22477462
The British Sign Language Variant of Stokoe Notation: Report on a Type-Design Project.
ERIC Educational Resources Information Center
Thoutenhoofd, Ernst
2003-01-01
Explores the outcome of a publicly-funded research project titled "Redesign of the British Sign Language (BSL) Notation System with a New Font for Use in ICT." The aim of the project was to redesign the British Sign Language variant of Stokoe notation for practical use in information technology systems and software, such as lexical…
Layered Systems Engineering Engines
NASA Technical Reports Server (NTRS)
Breidenthal, Julian C.; Overman, Marvin J.
2009-01-01
A notation is described for depicting the relationships between multiple, contemporaneous systems engineering efforts undertaken within a multi-layer system-of-systems hierarchy. We combined the concepts of remoteness of activity from the end customer, depiction of activity on a timeline, and data flow to create a new kind of diagram which we call a "Layered Vee Diagram." This notation is an advance over previous notations because it is able to be simultaneously precise about activity, level of granularity, product exchanges, and timing; these advances provide systems engineering managers a significantly improved ability to express and understand the relationships between many systems engineering efforts. Using the new notation, we obtain a key insight into the relationship between project duration and the strategy selected for chaining the systems engineering effort between layers, as well as insights into the costs, opportunities, and risks associated with alternate chaining strategies.
NASA Technical Reports Server (NTRS)
Thorne, K. S.; Zytkow, A. N.
1976-01-01
The general relativistic equations of stellar structure and evolution are reformulated in a notation which makes easy contact with Newtonian theory. Also, a general relativistic version of the mixing-length formalism for convection is presented. Finally, it is argued that in previous work on spherical systems general relativity theorists have identified the wrong quantity as "total mass-energy inside radius r."
Gap-minimal systems of notations and the constructible hierarchy
NASA Technical Reports Server (NTRS)
Lucian, M. L.
1972-01-01
If a constructibly countable ordinal alpha is a gap ordinal, then the order type of the set of index ordinals smaller than alpha is exactly alpha. The gap ordinals are the only points of discontinuity of a certain ordinal-valued function. The notion of gap minimality for well ordered systems of notations is defined, and the existence of gap-minimal systems of notations of arbitrarily large constructibly countable length is established.
Abstract numeric relations and the visual structure of algebra.
Landy, David; Brookes, David; Smout, Ryan
2014-09-01
Formal algebras are among the most powerful and general mechanisms for expressing quantitative relational statements; yet, even university engineering students, who are relatively proficient with algebraic manipulation, struggle with and often fail to correctly deploy basic aspects of algebraic notation (Clement, 1982). In the cognitive tradition, it has often been assumed that skilled users of these formalisms treat situations in terms of semantic properties encoded in an abstract syntax that governs the use of notation without particular regard to the details of the physical structure of the equation itself (Anderson, 2005; Hegarty, Mayer, & Monk, 1995). We explore how the notational structure of verbal descriptions or algebraic equations (e.g., the spatial proximity of certain words or the visual alignment of numbers and symbols in an equation) plays a role in the process of interpreting or constructing symbolic equations. We propose in particular that construction processes involve an alignment of notational structures across representation systems, biasing reasoners toward the selection of formal notations that maintain the visuospatial structure of source representations. For example, in the statement "There are 5 elephants for every 3 rhinoceroses," the spatial proximity of 5 and elephants and 3 and rhinoceroses will bias reasoners to write the incorrect expression 5E = 3R, because that expression maintains the spatial relationships encoded in the source representation. In 3 experiments, participants constructed equations with given structure, based on story problems with a variety of phrasings. We demonstrate how the notational alignment approach accounts naturally for a variety of previously reported phenomena in equation construction and successfully predicts error patterns that are not accounted for by prior explanations, such as the left to right transcription heuristic.
Integrated mobility measurement and notation system
NASA Technical Reports Server (NTRS)
Roebuck, J. A., Jr.
1967-01-01
System for description of movements and positions facilitates design of space suits with more mobility. This measurement and notation system gives concise and unequivocal descriptions, compatible with engineering analysis and applicable to specific needs.
Clause, Sentence, and Discourse Patterns in Selected Languages of Nepal: Part I, General Approach.
ERIC Educational Resources Information Center
Hale, Austin
This volume, the first in a series of four on the languages of Nepal, contains the following papers: "Toward the Systematization of Display Grammar,""Clause Patterns in Kham,""Tentative Systemic Organization of Nepali Sentences,""Maithili Sentences,""Notation for Simultaneous Representation of…
Rojo, Marcial García; Rolón, Elvira; Calahorra, Luis; García, Felix Oscar; Sánchez, Rosario Paloma; Ruiz, Francisco; Ballester, Nieves; Armenteros, María; Rodríguez, Teresa; Espartero, Rafael Martín
2008-07-15
Process orientation is one of the essential elements of quality management systems, including those in use in healthcare. Business processes in hospitals are very complex and variable. BPMN (Business Process Modelling Notation) is a user-oriented language specifically designed for the modelling of business (organizational) processes. Previous experiences of the use of this notation in the processes modelling within the Pathology in Spain or another country are not known. We present our experience in the elaboration of the conceptual models of Pathology processes, as part of a global programmed surgical patient process, using BPMN. With the objective of analyzing the use of BPMN notation in real cases, a multidisciplinary work group was created, including software engineers from the Dep. of Technologies and Information Systems from the University of Castilla-La Mancha and health professionals and administrative staff from the Hospital General de Ciudad Real. The work in collaboration was carried out in six phases: informative meetings, intensive training, process selection, definition of the work method, process describing by hospital experts, and process modelling. The modelling of the processes of Anatomic Pathology is presented using BPMN. The presented subprocesses are those corresponding to the surgical pathology examination of the samples coming from operating theatre, including the planning and realization of frozen studies. The modelling of Anatomic Pathology subprocesses has allowed the creation of an understandable graphical model, where management and improvements are more easily implemented by health professionals.
Rojo, Marcial García; Rolón, Elvira; Calahorra, Luis; García, Felix Óscar; Sánchez, Rosario Paloma; Ruiz, Francisco; Ballester, Nieves; Armenteros, María; Rodríguez, Teresa; Espartero, Rafael Martín
2008-01-01
Background Process orientation is one of the essential elements of quality management systems, including those in use in healthcare. Business processes in hospitals are very complex and variable. BPMN (Business Process Modelling Notation) is a user-oriented language specifically designed for the modelling of business (organizational) processes. Previous experiences of the use of this notation in the processes modelling within the Pathology in Spain or another country are not known. We present our experience in the elaboration of the conceptual models of Pathology processes, as part of a global programmed surgical patient process, using BPMN. Methods With the objective of analyzing the use of BPMN notation in real cases, a multidisciplinary work group was created, including software engineers from the Dep. of Technologies and Information Systems from the University of Castilla-La Mancha and health professionals and administrative staff from the Hospital General de Ciudad Real. The work in collaboration was carried out in six phases: informative meetings, intensive training, process selection, definition of the work method, process describing by hospital experts, and process modelling. Results The modelling of the processes of Anatomic Pathology is presented using BPMN. The presented subprocesses are those corresponding to the surgical pathology examination of the samples coming from operating theatre, including the planning and realization of frozen studies. Conclusion The modelling of Anatomic Pathology subprocesses has allowed the creation of an understandable graphical model, where management and improvements are more easily implemented by health professionals. PMID:18673511
Wavefront Curvature Sensing from Image Projections
2006-09-01
entrance pupil. The generalized pupil function, denoted P, provides a basic 1-7 mathematical model for the optical �eld at the system pupil: P(x; y...pupil or aperture radius, RP , may be included in Zernike functions and windowing functions to give the notation more generality . Given some ...promises a much faster read out time from the CCD along with some amount of information useful for estimating pupil phase. A General Image Projection
18 CFR 3a.31 - Classification markings and special notations.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Classification markings and special notations. 3a.31 Section 3a.31 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION Classification...
18 CFR 3a.31 - Classification markings and special notations.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Classification markings and special notations. 3a.31 Section 3a.31 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION Classification...
18 CFR 3a.31 - Classification markings and special notations.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Classification markings and special notations. 3a.31 Section 3a.31 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION Classification...
Wiemuth, M; Junger, D; Leitritz, M A; Neumann, J; Neumuth, T; Burgert, O
2017-08-01
Medical processes can be modeled using different methods and notations. Currently used modeling systems like Business Process Model and Notation (BPMN) are not capable of describing the highly flexible and variable medical processes in sufficient detail. We combined two modeling systems, Business Process Management (BPM) and Adaptive Case Management (ACM), to be able to model non-deterministic medical processes. We used the new Standards Case Management Model and Notation (CMMN) and Decision Management Notation (DMN). First, we explain how CMMN, DMN and BPMN could be used to model non-deterministic medical processes. We applied this methodology to model 79 cataract operations provided by University Hospital Leipzig, Germany, and four cataract operations provided by University Eye Hospital Tuebingen, Germany. Our model consists of 85 tasks and about 20 decisions in BPMN. We were able to expand the system with more complex situations that might appear during an intervention. An effective modeling of the cataract intervention is possible using the combination of BPM and ACM. The combination gives the possibility to depict complex processes with complex decisions. This combination allows a significant advantage for modeling perioperative processes.
Requirements Modeling with the Aspect-oriented User Requirements Notation (AoURN): A Case Study
NASA Astrophysics Data System (ADS)
Mussbacher, Gunter; Amyot, Daniel; Araújo, João; Moreira, Ana
The User Requirements Notation (URN) is a recent ITU-T standard that supports requirements engineering activities. The Aspect-oriented URN (AoURN) adds aspect-oriented concepts to URN, creating a unified framework that allows for scenario-based, goal-oriented, and aspect-oriented modeling. AoURN is applied to the car crash crisis management system (CCCMS), modeling its functional and non-functional requirements (NFRs). AoURN generally models all use cases, NFRs, and stakeholders as individual concerns and provides general guidelines for concern identification. AoURN handles interactions between concerns, capturing their dependencies and conflicts as well as the resolutions. We present a qualitative comparison of aspect-oriented techniques for scenario-based and goal-oriented requirements engineering. An evaluation carried out based on the metrics adapted from literature and a task-based evaluation suggest that AoURN models are more scalable than URN models and exhibit better modularity, reusability, and maintainability.
A Diagrammatic Language for Biochemical Networks
NASA Astrophysics Data System (ADS)
Maimon, Ron
2002-03-01
I present a diagrammatic language for representing the structure of biochemical networks. The language is designed to represent modular structure in a computational fasion, with composition of reactions replacing functional composition. This notation is used to represent arbitrarily large networks efficiently. The notation finds its most natural use in representing biological interaction networks, but it is a general computing language appropriate to any naturally occuring computation. Unlike lambda-calculus, or text-derived languages, it does not impose a tree-structure on the diagrams, and so is more effective at representing biological fucntion than competing notations.
Knowledge representation for commonality
NASA Technical Reports Server (NTRS)
Yeager, Dorian P.
1990-01-01
Domain-specific knowledge necessary for commonality analysis falls into two general classes: commonality constraints and costing information. Notations for encoding such knowledge should be powerful and flexible and should appeal to the domain expert. The notations employed by the Commonality Analysis Problem Solver (CAPS) analysis tool are described. Examples are given to illustrate the main concepts.
2009-12-01
Business Process Modeling BPMN Business Process Modeling Notation SoA Service-oriented Architecture UML Unified Modeling Language CSP...system developers. Supporting technologies include Business Process Modeling Notation ( BPMN ), Unified Modeling Language (UML), model-driven architecture
Children's note taking as a mnemonic tool.
Eskritt, Michelle; McLeod, Kellie
2008-09-01
When given the opportunity to take notes in memory tasks, children sometimes make notes that are not useful. The current study examined the role that task constraints might play in the production of nonmnemonic notes. In Experiment 1, children played one easy and one difficult memory game twice, once with the opportunity to make notes and once without that opportunity. More children produced functional notations for the easier task than for the more difficult task, and their notations were beneficial to memory performance. Experiment 2 found that the majority of children who at first made nonmnemonic notations were able to produce functional notations with minimal training, and there was no significant difference in notation quality or memory performance between spontaneous and trained note takers. Experiment 3 revealed that the majority of children could transfer their training to a novel task. The results suggest that children's production of nonmnemonic notes may be due in part to a lack of knowledge regarding what task information is important to represent or how to represent it in their notes rather than to an inability to make functional notes in general.
Theory I: A Comprehensive Approach to Theory Through Ear Training, Music: 5636.18.
ERIC Educational Resources Information Center
Blum, Jesse
This Quinmester, 9-week course of study, is an aural approach to theory through sight singing and dictation techniques employing the moveable "Do" and number systems, interspersed with an outline approach to general music history. It is designed for students acquainted with staff notation and exposed to keyboard or to instrumental or…
A systematic investigation of the link between rational number processing and algebra ability.
Hurst, Michelle; Cordes, Sara
2018-02-01
Recent research suggests that fraction understanding is predictive of algebra ability; however, the relative contributions of various aspects of rational number knowledge are unclear. Furthermore, whether this relationship is notation-dependent or rather relies upon a general understanding of rational numbers (independent of notation) is an open question. In this study, college students completed a rational number magnitude task, procedural arithmetic tasks in fraction and decimal notation, and an algebra assessment. Using these tasks, we measured three different aspects of rational number ability in both fraction and decimal notation: (1) acuity of underlying magnitude representations, (2) fluency with which symbols are mapped to the underlying magnitudes, and (3) fluency with arithmetic procedures. Analyses reveal that when looking at the measures of magnitude understanding, the relationship between adults' rational number magnitude performance and algebra ability is dependent upon notation. However, once performance on arithmetic measures is included in the relationship, individual measures of magnitude understanding are no longer unique predictors of algebra performance. Furthermore, when including all measures simultaneously, results revealed that arithmetic fluency in both fraction and decimal notation each uniquely predicted algebra ability. Findings are the first to demonstrate a relationship between rational number understanding and algebra ability in adults while providing a clearer picture of the nature of this relationship. © 2017 The British Psychological Society.
Japanese Children's Understanding of Notational Systems
ERIC Educational Resources Information Center
Takahashi, Noboru
2012-01-01
This study examined Japanese children's understanding of two Japanese notational systems: "hiragana" and "kanji". In three experiments, 126 3- to 6-year-olds were asked to name words written in hiragana or kanji as they appeared with different pictures. Consistent with Bialystok ("Journal of Experimental Child…
Assessing Resource Value and Relationships Between Objectives in Effects-Based Operations
2006-03-01
terms of a set of desired end states for the campaign’s system of systems . Value theory was used to identify the resource’s value in terms of the direct...2-1 2.3. System of Systems Analysis (SoSA) Definitions and Notation .................. 2-6 2.4. Mathematical Notation to...Describe an Enemy System ............................... 2-7 2.5. Weighting Techniques
"Why not stoichiometry" versus "stoichiometry--why not?" Part I: General context.
Michałowska-Kaczmarczyk, Anna Maria; Asuero, Agustin G; Michałowski, Tadeusz
2015-01-01
The elementary concepts involved with stoichiometry are considered from different viewpoints. Some examples of approximate calculations made according to the stoichiometric scheme are indicated, and correct resolution of the problems involved is presented. The principles of balancing chemical equations, based on their apparent similarities with algebraic equations, are criticized. The review concerns some peculiarities inherent in chemical reaction notation and its use (and abuse) in stoichiometric calculations that provide inconsistent results for various reasons. This "conventional" approach to stoichiometry is put in context with the generalized approach to electrolytic systems (GATES) established by Michałowski. The article contains a number of proposals that could potentially be taken into account and included in the next edition of the Orange Book. Notation of ions used in this article is not, deliberately, in accordance with actual IUPAC requirements in this respect. This article is intended to be provocative with the hope that some critical debate around the important topics treated should be generated and creatively expanded in the scientific community.
Semantics of Inheritance and Attributions in the Description System Omega. Revision.
1982-01-01
criticized either for being too general or too inflexible. General deductive procedures for predicate logic easily go out of control. There have been a...6 and 7. Section 8 is concerned with a discussion of attributions: the language is extended by introducing syntactic notations for four different...for valid formulas of the theory. The models prorided earlier are usefulL in this stage for providing a guideline and a criterion for suitability of
Kumarapeli, Pushpa; de Lusignan, Simon; Koczan, Phil; Jones, Beryl; Sheeler, Ian
2007-01-01
UK general practice is universally computerised, with computers used in the consulting room at the point of care. Practices use a range of different brands of computer system, which have developed organically to meet the needs of general practitioners and health service managers. Unified Modelling Language (UML) is a standard modelling and specification notation widely used in software engineering. To examine the feasibility of UML notation to compare the impact of different brands of general practice computer system on the clinical consultation. Multi-channel video recordings of simulated consultation sessions were recorded on three different clinical computer systems in common use (EMIS, iSOFT Synergy and IPS Vision). User action recorder software recorded time logs of keyboard and mouse use, and pattern recognition software captured non-verbal communication. The outputs of these were used to create UML class and sequence diagrams for each consultation. We compared 'definition of the presenting problem' and 'prescribing', as these tasks were present in all the consultations analysed. Class diagrams identified the entities involved in the clinical consultation. Sequence diagrams identified common elements of the consultation (such as prescribing) and enabled comparisons to be made between the different brands of computer system. The clinician and computer system interaction varied greatly between the different brands. UML sequence diagrams are useful in identifying common tasks in the clinical consultation, and for contrasting the impact of the different brands of computer system on the clinical consultation. Further research is needed to see if patterns demonstrated in this pilot study are consistently displayed.
ACORNS: A Tool for the Visualisation and Modelling of Atypical Development
ERIC Educational Resources Information Center
Moore, D. G.; George, R.
2011-01-01
Across many academic disciplines visualisation and notation systems are used for modelling data and developing theory, but in child development visual models are not widely used; yet researchers and students of developmental difficulties may benefit from a visualisation and notation system which can clearly map developmental outcomes and…
Uribe, Gustavo A; Blobel, Bernd; López, Diego M; Schulz, Stefan
2015-01-01
Chronic diseases such as Type 2 Diabetes Mellitus (T2DM) constitute a big burden to the global health economy. T2DM Care Management requires a multi-disciplinary and multi-organizational approach. Because of different languages and terminologies, education, experiences, skills, etc., such an approach establishes a special interoperability challenge. The solution is a flexible, scalable, business-controlled, adaptive, knowledge-based, intelligent system following a systems-oriented, architecture-centric, ontology-based and policy-driven approach. The architecture of real systems is described, using the basics and principles of the Generic Component Model (GCM). For representing the functional aspects of a system the Business Process Modeling Notation (BPMN) is used. The system architecture obtained is presented using a GCM graphical notation, class diagrams and BPMN diagrams. The architecture-centric approach considers the compositional nature of the real world system and its functionalities, guarantees coherence, and provides right inferences. The level of generality provided in this paper facilitates use case specific adaptations of the system. By that way, intelligent, adaptive and interoperable T2DM care systems can be derived from the presented model as presented in another publication.
NASA Technical Reports Server (NTRS)
Rumsey, Christopher L.; Poirier, Diane M. A.; Bush, Robert H.; Towne, Charles E.
2001-01-01
The CFD General Notation System (CGNS) was developed to be a self-descriptive, machine-independent standard for storing CFD aerodynamic data. This guide aids users in the implementation of CGNS. It is intended as a tutorial on the usage of the CGNS mid-level library routines for reading and writing grid and flow solution datasets for both structured and unstructured methodologies.
Conversion of KEGG metabolic pathways to SBGN maps including automatic layout
2013-01-01
Background Biologists make frequent use of databases containing large and complex biological networks. One popular database is the Kyoto Encyclopedia of Genes and Genomes (KEGG) which uses its own graphical representation and manual layout for pathways. While some general drawing conventions exist for biological networks, arbitrary graphical representations are very common. Recently, a new standard has been established for displaying biological processes, the Systems Biology Graphical Notation (SBGN), which aims to unify the look of such maps. Ideally, online repositories such as KEGG would automatically provide networks in a variety of notations including SBGN. Unfortunately, this is non‐trivial, since converting between notations may add, remove or otherwise alter map elements so that the existing layout cannot be simply reused. Results Here we describe a methodology for automatic translation of KEGG metabolic pathways into the SBGN format. We infer important properties of the KEGG layout and treat these as layout constraints that are maintained during the conversion to SBGN maps. Conclusions This allows for the drawing and layout conventions of SBGN to be followed while creating maps that are still recognizably the original KEGG pathways. This article details the steps in this process and provides examples of the final result. PMID:23953132
Understanding Charts and Graphs.
1987-07-28
34notational.* English, then, is obviously not a notational system because ambiguous words or sentences are possible, whereas musical notion is notational...how lines and regions are detected and organized; these principles grow out of discoveries about human visual information processing. A syntactic...themselves name other colors (e.g., the word "red" is printed in blue ink; this is known as the OStroop effecto ). Similarly, if "left" and "right" are
NASA Astrophysics Data System (ADS)
Ham, Ji-Young; Lee, Joongul
2017-03-01
We calculate the Chern-Simons invariants of the hyperbolic orbifolds of the knot with Conway's notation C(2n, 3) using the Schläfli formula for the generalized Chern-Simons function on the family of C(2n, 3) cone-manifold structures. We present the concrete and explicit formula of them. We apply the general instructions of Hilden, Lozano, and Montesinos-Amilibia and extend the Ham and Lee's methods. As an application, we calculate the Chern-Simons invariants of cyclic coverings of the hyperbolic C(2n, 3) orbifolds.
Optimization of coupled systems: A critical overview of approaches
NASA Technical Reports Server (NTRS)
Balling, R. J.; Sobieszczanski-Sobieski, J.
1994-01-01
A unified overview is given of problem formulation approaches for the optimization of multidisciplinary coupled systems. The overview includes six fundamental approaches upon which a large number of variations may be made. Consistent approach names and a compact approach notation are given. The approaches are formulated to apply to general nonhierarchic systems. The approaches are compared both from a computational viewpoint and a managerial viewpoint. Opportunities for parallelism of both computation and manpower resources are discussed. Recommendations regarding the need for future research are advanced.
Barnes-Burroughs, Kathryn; Anderson, Edward E; Hughes, Thomas; Lan, William Y; Dent, Karl; Arnold, Sue; Dolter, Gerald; McNeil, Kathy
2007-11-01
The purpose of this investigation was to ascertain the pedagogical viability of computer-generated melodic contour mapping systems in the classical singing studio, as perceived by their resulting effect (if any) on vocal timbre when a singer's head and neck remained in a normal singing posture. The evaluation of data gathered during the course of the study indicates that the development of consistent vocal timbre produced by the classical singing student may be enhanced through visual/kinesthetic response to melodic contour inversion mapping, as it balances the singer's perception of melodic intervals in standard musical notation. Unexpectedly, it was discovered that the system, in its natural melodic contour mode, may also be useful for teaching a student to sing a consistent legato line. The results of the study also suggest that the continued development of this new technology for the general teaching studio, designed to address standard musical notation and a singer's visual/kinesthetic response to it, may indeed be useful.
Elmarakeby, Haitham; Arefiyan, Mostafa; Myers, Elijah; Li, Song; Grene, Ruth; Heath, Lenwood S
2017-12-01
The Beacon Editor is a cross-platform desktop application for the creation and modification of signal transduction pathways using the Systems Biology Graphical Notation Activity Flow (SBGN-AF) language. Prompted by biologists' requests for enhancements, the Beacon Editor includes numerous powerful features for the benefit of creation and presentation.
Structural Features of Algebraic Quantum Notations
ERIC Educational Resources Information Center
Gire, Elizabeth; Price, Edward
2015-01-01
The formalism of quantum mechanics includes a rich collection of representations for describing quantum systems, including functions, graphs, matrices, histograms of probabilities, and Dirac notation. The varied features of these representations affect how computations are performed. For example, identifying probabilities of measurement outcomes…
African Oral Tradition Literacy.
ERIC Educational Resources Information Center
Green, Doris
1985-01-01
Presents the basic principles of two systems for notating African music and dance: Labanotation (created to record and analyze movements) and Greenotation (created to notate musical instruments of Africa and to parallel Labanotation whereby both music and dance are incorporated into one integrated score). (KH)
ProForma: A Standard Proteoform Notation
DOE Office of Scientific and Technical Information (OSTI.GOV)
LeDuc, Richard D.; Schwämmle, Veit; Shortreed, Michael R.
The Consortium for Top-Down Proteomics (CTDP) proposes a standardized notation, ProForma, for writing the sequence of fully characterized proteoforms. ProForma provides a means to communicate any proteoform by writing the amino acid sequence using standard one-letter notation and specifying modifications or unidentified mass shifts within brackets following certain amino acids. The notation is unambiguous, human readable, and can easily be parsed and written by bioinformatic tools. This system uses seven rules and supports a wide range of possible use cases, ensuring compatibility and reproducibility of proteoform annotations. Standardizing proteoform sequences will simplify storage, comparison, and reanalysis of proteomic studies, andmore » the Consortium welcomes input and contributions from the research community on the continued design and maintenance of this standard.« less
Development of a Notational Analysis System for Selected Soccer Skills of a Women's College Team
ERIC Educational Resources Information Center
Thomas, Camille; Fellingham, Gilbert; Vehrs, Pat
2009-01-01
The purposes of this study were to develop a notational system to evaluate passing, dribbling, first touch, and individual defensive skills as they relate to success during women's soccer games and to develop a statistical model to weigh the importance of each skill on creating scoring opportunities. Sequences of skills in ten games of a National…
Multi-Rate Digital Control Systems with Simulation Applications. Volume I. Technical Report
1980-09-01
108 45. A Pseudo Differentiation Configuration ........................ 110 46. Bode Plot, Pseudo Differentiation ...symbolically in Fig. 7a and for 11 x 2 in Fig. 7b. (* notation on x2is used here to indicate an "unconven- tional" sampling operation.) 115 TXi ,A! T...the general multi-rate/multiple-order open-loop system of Fig. 21 have a sine wave input. In Fig 2L, = (GIRj) (114) CT/N = [GGRt]T/N ( 115 ) where a, B
A new formal graphic language for the representation of complex energy distribution systems
NASA Astrophysics Data System (ADS)
Benes, E.; Viehboeck, F. P.
A schematic notation system for the representation in design and analysis of multi-component heating systems is presented. This graphic language is clear and rigorous and allows quick changes between two basic levels of abstraction, as shown by two examples: a swimming pool with combined solar/electric heating system and the low temperature heating system of the Institute of Molecular Biology in Salzburg, Austria. The notation's 'energy path graphs' are more adequate for judging the relative merits of alternative system configurations than commonly used simplified installation schemes.
Formal Requirements-Based Programming for Complex Systems
NASA Technical Reports Server (NTRS)
Rash, James L.; Hinchey, Michael G.; Rouff, Christopher A.; Gracanin, Denis
2005-01-01
Computer science as a field has not yet produced a general method to mechanically transform complex computer system requirements into a provably equivalent implementation. Such a method would be one major step towards dealing with complexity in computing, yet it remains the elusive holy grail of system development. Currently available tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The gap that such tools and methods leave unfilled is that the formal models cannot be proven to be equivalent to the system requirements as originated by the customer For the classes of complex systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations. While other techniques are available, this method is unique in offering full mathematical tractability while using notations and techniques that are well known and well trusted. We illustrate the application of the method to an example procedure from the Hubble Robotic Servicing Mission currently under study and preliminary formulation at NASA Goddard Space Flight Center.
ERIC Educational Resources Information Center
Sheridan, Susan Rich
2005-01-01
A model of human language requires a theory of meaningful marks. Humans are the only species who use marks to think. A theory of marks identifies children's scribbles as significant behavior, while hypothesizing the importance of notational systems to hominid brain evolution. By recognizing the importance of children's scribbles and drawings in…
General Rotorcraft Aeromechanical Stability Program (GRASP) - Theory Manual
1990-10-01
the A basis. Two symbols frequently encountered in vector operations that use index notation are the Kronecker delta eij and the Levi - Civita epsilon...Blade root cutout fijk Levi - Civita epsilon permutation symbol 0 pretwist angle 0’ pretwist per unit length (d;) Oi Tait-Bryan angles K~i moment strains...the components of the identity tensor in a Cartesian coordinate system, while the Levi Civita epsilon consists of components of the permutation
Doğramac, Sera N; Watsford, Mark L; Murphy, Aron J
2011-03-01
Subjective notational analysis can be used to track players and analyse movement patterns during match-play of team sports such as futsal. The purpose of this study was to establish the validity and reliability of the Event Recorder for subjective notational analysis. A course was designed, replicating ten minutes of futsal match-play movement patterns, where ten participants undertook the course. The course allowed a comparison of data derived from subjective notational analysis, to the known distances of the course, and to GPS data. The study analysed six locomotor activity categories, focusing on total distance covered, total duration of activities and total frequency of activities. The values between the known measurements and the Event Recorder were similar, whereas the majority of significant differences were found between the Event Recorder and GPS values. The reliability of subjective notational analysis was established with all ten participants being analysed on two occasions, as well as analysing five random futsal players twice during match-play. Subjective notational analysis is a valid and reliable method of tracking player movements, and may be a preferred and more effective method than GPS, particularly for indoor sports such as futsal, and field sports where short distances and changes in direction are observed.
Developing Systems of Notation as a Trace of Reasoning
ERIC Educational Resources Information Center
Tillema, Erik; Hackenberg, Amy
2011-01-01
In this paper, we engage in a thought experiment about how students might notate their reasoning for composing fractions multiplicatively (taking a fraction of a fraction and determining its size in relation to the whole). In the thought experiment we differentiate between two levels of a fraction composition scheme, which have been identified in…
A Multimodal Neural Network Recruited by Expertise with Musical Notation
ERIC Educational Resources Information Center
Wong, Yetta Kwailing; Gauthier, Isabel
2010-01-01
Prior neuroimaging work on visual perceptual expertise has focused on changes in the visual system, ignoring possible effects of acquiring expert visual skills in nonvisual areas. We investigated expertise for reading musical notation, a skill likely to be associated with multimodal abilities. We compared brain activity in music-reading experts…
Raising the Degree of Service-Orientation of a SOA-based Software System: A Case Study
2009-12-01
protocols, as well as executable processes that can be compiled into runtime scripts” [2] The Business Process Modeling Notation ( BPMN ) provides a...Notation ( BPMN ) 1.2. Jan. 2009. URL: http://www.omg.org/spec/ BPMN /1.2/ [25] .NET Framework Developer Center. .NET Remoting Overview. 2003. URL: http
Examination of Modeling Languages to Allow Quantitative Analysis for Model-Based Systems Engineering
2014-06-01
x THIS PAGE INTENTIONALLY LEFT BLANK xi LIST OF ACRONYMS AND ABBREVIATIONS BOM Base Object Model BPMN Business Process Model & Notation DOD...SysML. There are many variants such as the Unified Profile for DODAF/MODAF (UPDM) and Business Process Model & Notation ( BPMN ) that have origins in
HRT-UML: a design method for hard real-time systems based on the UML notation
NASA Astrophysics Data System (ADS)
D'Alessandro, Massimo; Mazzini, Silvia; di Natale, Marco; Lipari, Giuseppe
2002-07-01
The Hard Real-Time-Unified Modelling Language (HRT-UML) method aims at providing a comprehensive solution to the modeling of Hard Real Time systems. The experience shows that the design of Hard Real-Time systems needs methodologies suitable for the modeling and analysis of aspects related to time, schedulability and performance. In the context of the European Aerospace community a reference method for design is Hierarchical Object Oriented Design (HOOD) and in particular its extension for the modeling of hard real time systems, Hard Real-Time-Hierarchical Object Oriented Design (HRT-HOOD), recommended by the European Space Agency (ESA) for the development of on-board systems. On the other hand in recent years the Unified Modelling Language (UML) has been gaining a very large acceptance in a wide range of domains, all over the world, becoming a de-facto international standard. Tool vendors are very active in this potentially big market. In the Aerospace domain the common opinion is that UML, as a general notation, is not suitable for Hard Real Time systems, even if its importance is recognized as a standard and as a technological trend in the near future. These considerations suggest the possibility of replacing the HRT-HOOD method with a customized version of UML, that incorporates the advantages of both standards and complements the weak points. This approach has the clear advantage of making HRT-HOOD converge on a more powerful and expressive modeling notation. The paper identifies a mapping of the HRT-HOOD semantics into the UML one, and proposes a UML extension profile, that we call HRT-UML, based on the UML standard extension mechanisms, to fully represent HRT-HOOD design concepts. Finally it discusses the relationships between our profile and the UML profile for schedulability, performance and time, adopted by OMG in November 2001.
Challenging assumptions of notational transparency: the case of vectors in engineering mathematics
NASA Astrophysics Data System (ADS)
Craig, Tracy S.
2017-11-01
The notation for vector analysis has a contentious nineteenth century history, with many different notations describing the same or similar concepts competing for use. While the twentieth century has seen a great deal of unification in vector analysis notation, variation still remains. In this paper, the two primary notations used for expressing the components of a vector are discussed in historical and current context. Popular mathematical texts use the two notations as if they are transparent and interchangeable. In this research project, engineering students' proficiency at vector analysis was assessed and the data were analyzed using the Rasch measurement method. Results indicate that the students found items expressed in unit vector notation more difficult than those expressed in parenthesis notation. The expert experience of notation as transparent and unproblematically symbolic of underlying processes independent of notation is shown to contrast with the student experience where the less familiar notation is experienced as harder to work with.
Semantically-Rigorous Systems Engineering Modeling Using Sysml and OWL
NASA Technical Reports Server (NTRS)
Jenkins, J. Steven; Rouquette, Nicolas F.
2012-01-01
The Systems Modeling Language (SysML) has found wide acceptance as a standard graphical notation for the domain of systems engineering. SysML subsets and extends the Unified Modeling Language (UML) to define conventions for expressing structural, behavioral, and analytical elements, and relationships among them. SysML-enabled modeling tools are available from multiple providers, and have been used for diverse projects in military aerospace, scientific exploration, and civil engineering. The Web Ontology Language (OWL) has found wide acceptance as a standard notation for knowledge representation. OWL-enabled modeling tools are available from multiple providers, as well as auxiliary assets such as reasoners and application programming interface libraries, etc. OWL has been applied to diverse projects in a wide array of fields. While the emphasis in SysML is on notation, SysML inherits (from UML) a semantic foundation that provides for limited reasoning and analysis. UML's partial formalization (FUML), however, does not cover the full semantics of SysML, which is a substantial impediment to developing high confidence in the soundness of any conclusions drawn therefrom. OWL, by contrast, was developed from the beginning on formal logical principles, and consequently provides strong support for verification of consistency and satisfiability, extraction of entailments, conjunctive query answering, etc. This emphasis on formal logic is counterbalanced by the absence of any graphical notation conventions in the OWL standards. Consequently, OWL has had only limited adoption in systems engineering. The complementary strengths and weaknesses of SysML and OWL motivate an interest in combining them in such a way that we can benefit from the attractive graphical notation of SysML and the formal reasoning of OWL. This paper describes an approach to achieving that combination.
Japanese children's understanding of notational systems.
Takahashi, Noboru
2012-12-01
This study examined Japanese children's understanding of two Japanese notational systems: hiragana and kanji. In three experiments, 126 3- to 6-year-olds were asked to name words written in hiragana or kanji as they appeared with different pictures. Consistent with Bialystok (Journal of Experimental Child Psychology, 2000, Vol. 76, pp. 173-189), 3- and 4-year-olds' identification of written words varied according to the picture with which they appeared, and older children named the words with different pictures more accurately. The 4-year-olds who could read words written in hiragana but could not read words written in kanji named both hiragana words and kanji words with different pictures more accurately than those who could not read hiragana and kanji words. The interrelationship between the symbol-sound relationships and the symbol-referent relationships of notational systems is discussed. Copyright © 2012 Elsevier Inc. All rights reserved.
A decoupled recursive approach for constrained flexible multibody system dynamics
NASA Technical Reports Server (NTRS)
Lai, Hao-Jan; Kim, Sung-Soo; Haug, Edward J.; Bae, Dae-Sung
1989-01-01
A variational-vector calculus approach is employed to derive a recursive formulation for dynamic analysis of flexible multibody systems. Kinematic relationships for adjacent flexible bodies are derived in a companion paper, using a state vector notation that represents translational and rotational components simultaneously. Cartesian generalized coordinates are assigned for all body and joint reference frames, to explicitly formulate deformation kinematics under small deformation kinematics and an efficient flexible dynamics recursive algorithm is developed. Dynamic analysis of a closed loop robot is performed to illustrate efficiency of the algorithm.
Respiratory protective device design using control system techniques
NASA Technical Reports Server (NTRS)
Burgess, W. A.; Yankovich, D.
1972-01-01
The feasibility of a control system analysis approach to provide a design base for respiratory protective devices is considered. A system design approach requires that all functions and components of the system be mathematically identified in a model of the RPD. The mathematical notations describe the operation of the components as closely as possible. The individual component mathematical descriptions are then combined to describe the complete RPD. Finally, analysis of the mathematical notation by control system theory is used to derive compensating component values that force the system to operate in a stable and predictable manner.
Diagrams and Math Notation in E-Learning: Growing Pains of a New Generation
ERIC Educational Resources Information Center
Smith, Glenn Gordon; Ferguson, David
2004-01-01
Current e-learning environments are ill-suited to college mathematics. Instructors/students struggle to post diagrams and math notation. A new generation of math-friendly e-learning tools, including WebEQ, bundled with Blackboard 6, and NetTutor's Whiteboard, address these problems. This paper compares these two systems using criteria for ideal…
ERIC Educational Resources Information Center
Higgins, William R.
1987-01-01
Reviews a dissertation in which the problems of real-time pitch detection by computer were studied in an attempt to develop a learning tool for sightsinging students. Specialized hardware and software were developed to discriminate aural pitches and to display them in real-time using standard notation. (BSR)
A Non-technical User-Oriented Display Notation for XACML Conditions
NASA Astrophysics Data System (ADS)
Stepien, Bernard; Felty, Amy; Matwin, Stan
Ideally, access control to resources in complex IT systems ought to be handled by business decision makers who own a given resource (e.g., the pay and benefits section of an organization should decide and manage the access rules to the payroll system). To make this happen, the security and database communities need to develop vendor-independent access management tools, useable by decision makers, rather than technical personnel detached from a given business function. We have developed and implemented such tool, based on XACML. The XACML is an important emerging tool for managing complex access control applications. As a formal notation, based on an XML schema representing the grammar of a given application, XACML is precise and non-ambiguous. But this very property puts it out of reach of non-technical users. We propose a new notation for displaying and editing XACML rules that is independent of XML, and we develop an editor for it. Our notation combines a tree representation of logical expressions with an accessible natural language layer. Our early experience indicates that such rules can be grasped by non-technical users wishing to develop and control rules for accessing their own resources.
Mise en Scene: Conversion of Scenarios to CSP Traces for the Requirements-to-Design-to-Code Project
NASA Technical Reports Server (NTRS)
Carter. John D.; Gardner, William B.; Rash, James L.; Hinchey, Michael G.
2007-01-01
The "Requirements-to-Design-to-Code" (R2D2C) project at NASA's Goddard Space Flight Center is based on deriving a formal specification expressed in Communicating Sequential Processes (CSP) notation from system requirements supplied in the form of CSP traces. The traces, in turn, are to be extracted from scenarios, a user-friendly medium often used to describe the required behavior of computer systems under development. This work, called Mise en Scene, defines a new scenario medium (Scenario Notation Language, SNL) suitable for control-dominated systems, coupled with a two-stage process for automatic translation of scenarios to a new trace medium (Trace Notation Language, TNL) that encompasses CSP traces. Mise en Scene is offered as an initial solution to the problem of the scenarios-to-traces "D2" phase of R2D2C. A survey of the "scenario" concept and some case studies are also provided.
ERIC Educational Resources Information Center
Ruder, Suzanne M.; Straumanis, Andrei R.
2009-01-01
A critical stage in the process of developing a conceptual understanding of organic chemistry is learning to use curved arrow notation. From this stems the ability to predict reaction products and mechanisms beyond the realm of memorization. Since evaluation (i.e., testing) is known to be a key driver of student learning, it follows that a new…
A Formal Messaging Notation for Alaskan Aviation Data
NASA Technical Reports Server (NTRS)
Rios, Joseph L.
2015-01-01
Data exchange is an increasingly important aspect of the National Airspace System. While many data communication channels have become more capable of sending and receiving data at higher throughput rates, there is still a need to use communication channels efficiently with limited throughput. The limitation can be based on technological issues, financial considerations, or both. This paper provides a complete description of several important aviation weather data in Abstract Syntax Notation format. By doing so, data providers can take advantage of Abstract Syntax Notation's ability to encode data in a highly compressed format. When data such as pilot weather reports, surface weather observations, and various weather predictions are compressed in such a manner, it allows for the efficient use of throughput-limited communication channels. This paper provides details on the Abstract Syntax Notation One (ASN.1) implementation for Alaskan aviation data, and demonstrates its use on real-world aviation weather data samples as Alaska has sparse terrestrial data infrastructure and data are often sent via relatively costly satellite channels.
A clocking discipline for two-phase digital integrated circuits
NASA Astrophysics Data System (ADS)
Noice, D. C.
1983-09-01
Sooner or later a designer of digital circuits must face the problem of timing verification so he can avoid errors caused by clock skew, critical races, and hazards. Unlike previous verification methods, such as timing simulation and timing analysis, the approach presented here guarantees correct operation despite uncertainty about delays in the circuit. The result is a clocking discipline that deals with timing abstractions only. It is not based on delay calculations; it is only concerned with the correct, synchronous operation at some clock rate. Accordingly, it may be used earlier in the design cycle, which is particularly important to integrated circuit designs. The clocking discipline consists of a notation of clocking types, and composition rules for using the types. Together, the notation and rules define a formal theory of two phase clocking. The notation defines the names and exact characteristics for different signals that are used in a two phase digital system. The notation makes it possible to develop rules for propagating the clocking types through particular circuits.
31 CFR 360.56 - General instructions and liability.
Code of Federal Regulations, 2010 CFR
2010-07-01
... transaction form, to establish his or her identity in accordance with Department of the Treasury instructions and identification guidelines; (2) Place a notation on the back of the bond or on the appropriate...
The N-BOD2 user's and programmer's manual
NASA Technical Reports Server (NTRS)
Frisch, H. P.
1978-01-01
A general purpose digital computer program was developed and designed to aid in the analysis of spacecraft attitude dynamics. The program provides the analyst with the capability of automatically deriving and numerically solving the equations of motion of any system that can be modeled as a topological tree of coupled rigid bodies, flexible bodies, point masses, and symmetrical momentum wheels. Two modes of output are available. The composite system equations of motion may be outputted on a line printer in a symbolic form that may be easily translated into common vector-dyadic notation, or the composite system equations of motion may be solved numerically and any desirable set of system state variables outputted as a function of time.
Controlling Threats to Nuclear Security: A Hollistic Model
1997-06-01
learned . However, it may also be critical to consider the ability of the people recruited to work together as a team--trust, loyalty, and commitment...material from container Replace container Restore to original condition /sealsr etc.) Detection shield Transp ,ort medium (container) Provide cover for...is no special terminology or notation to be learned ; the model uses whatever terminology and notation is appropriate to the system being analyzed
31 CFR 353.56 - General instructions and liability.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Public Debt transaction form, to establish his or her identity in accordance with Department of the Treasury instructions and identification guidelines; (2) Place a notation on the back of the bond or on the...
The Mental Representation of Music Notation: Notational Audiation
ERIC Educational Resources Information Center
Brodsky, Warren; Kessler, Yoav; Rubinstein, Bat-Sheva; Ginsborg, Jane; Henik, Avishai
2008-01-01
This study investigated the mental representation of music notation. Notational audiation is the ability to internally "hear" the music one is reading before physically hearing it performed on an instrument. In earlier studies, the authors claimed that this process engages music imagery contingent on subvocal silent singing. This study refines the…
The psychoacoustics of musical articulation
NASA Astrophysics Data System (ADS)
Spiegelberg, Scott Charles
This dissertation develops psychoacoustical definitions of notated articulations, the necessary first step in articulation research. This research can be useful to theorists interested in timbre analysis, the psychology of performance, analysis and performance, the psychology of style differentiation, and performance pedagogy. An explanation of wavelet transforms precedes the development of new techniques for analyzing transient sounds. A history of timbre perception research reveals the inadequacies of current sound segmentation models, resulting in the creation of a new model, the Pitch/Amplitude/Centroid Trajectory (PACT) model of sound segmentation. The new analysis techniques and PACT model are used to analyze recordings of performers playing a melodic fragment in a series of notated articulations. Statistical tests showed that the performers generally agreed on the interpretation of five different articulation groups. A cognitive test of articulation similarity, using musicians and non-musicians as participants, revealed a close correlation between similarity judgments and physical attributes, though additional unknown factors are clearly present. A second psychological test explored the perceptual salience of articulation notation, by asking musically-trained participants to match stimuli to the same notations the performers used. The participants also marked verbal descriptors for each articulation, such as short/long, sharp/dull, loud/soft, harsh/gentle, and normal/extreme. These results were matched against the results of Chapters Five and Six, providing an overall interpretation of the psychoacoustics of articulation.
Special report writer: A flexible information management system. Documentation and user's manual
NASA Technical Reports Server (NTRS)
Greene, W. A.
1976-01-01
A special report writer (SSR) was developed which performs multiple correlations on files containing several data hierarchies. Output reports are specified in a simple notation, readily learned by persons having limited familarity with ADP. The SRR system can be adopted by other NASA installations while the basic techniques themselves are compatible with the information management needs of a wide range of organizations. Specifically, the program lends itself to generalization and can be readily adapted for other file management purposes. Extensive details on the characteristics of the SRR program are presented along with a full explanation of the system for those contemplating its application to other data bases. The complete COBOL program and documentation are available.
NASA Astrophysics Data System (ADS)
Skersys, Tomas; Butleris, Rimantas; Kapocius, Kestutis
2013-10-01
Approaches for the analysis and specification of business vocabularies and rules are very relevant topics in both Business Process Management and Information Systems Development disciplines. However, in common practice of Information Systems Development, the Business modeling activities still are of mostly empiric nature. In this paper, basic aspects of the approach for business vocabularies' semi-automated extraction from business process models are presented. The approach is based on novel business modeling-level OMG standards "Business Process Model and Notation" (BPMN) and "Semantics for Business Vocabularies and Business Rules" (SBVR), thus contributing to OMG's vision about Model-Driven Architecture (MDA) and to model-driven development in general.
Using music[al] knowledge to represent expressions of emotions.
Alexander, Stewart C; Garner, David Kirkland; Somoroff, Matthew; Gramling, David J; Norton, Sally A; Gramling, Robert
2015-11-01
Being able to identify expressions of emotion is crucial to effective clinical communication research. However, traditional linguistic coding systems often cannot represent emotions that are expressed nonlexically or phonologically (i.e., not through words themselves but through vocal pitch, speed/rhythm/tempo, and volume). Using audio recording of a palliative care consultation in the natural hospital setting, two experienced music scholars employed Western musical notation, as well as the graphic realization of a digital audio program (Piano roll visualization), to visually represent the sonic features of conversation where a patient has an emotional "choke" moment. Western musical notation showed the ways that changes in pitch and rate correspond to the patient's emotion: rising sharply in intensity before slowly fading away. Piano roll visualization is a helpful supplement. Using musical notation to illustrate palliative care conversations in the hospital setting can render visible for analysis several aspects of emotional expression that researchers otherwise experience as intuitive or subjective. Various forms and formats of musical notation techniques and sonic visualization technologies should be considered as fruitful and complementary alternatives to traditional coding tools in clinical communications research. Musical notation offers opportunity for both researchers and learners to "see" how communication evolves in clinical encounters, particularly where the lexical and phonological features of interpersonal communication are concordant and discordant with one another. Copyright © 2015. Published by Elsevier Ireland Ltd.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-27
... notation is used for substances identified as causing or contributing to allergic contact dermatitis (ACD... CONTACT: G. Scott Dotson, NIOSH, Robert A Taft Laboratories, MS-C32, 4676 Columbia Parkway, Cincinnati, OH... chemical contact with the skin. This strategy involves the assignment of multiple skin notations for...
ERIC Educational Resources Information Center
Heiland, Teresa L.
2015-01-01
Four undergraduate dance majors learned Motif Notation and Labanotation using a second-language acquisition, playful, constructivist approach to learning notation literacy in order to learn and dance the "Parsons Etude." Qualitative outcomes were gathered from student journals and pre- and post-tests that assessed for levels of improved…
Sound Foundations: Organic Approaches to Learning Notation in Beginning Band
ERIC Educational Resources Information Center
West, Chad
2016-01-01
By starting with a foundation of sound before sight, we can help our students learn notation organically in a way that honors the natural process. This article describes five organic approaches to learning notation in beginning band: (1) iconic notation, (2) point and play, (3) student lead-sheet, (4) modeling, and (5) kid dictation. While…
Effect of Color-Coded Notation on Music Achievement of Elementary Instrumental Students.
ERIC Educational Resources Information Center
Rogers, George L.
1991-01-01
Presents results of a study of color-coded notation to teach music reading to instrumental students. Finds no clear evidence that color-coded notation enhances achievement on performing by memory, sight-reading, or note naming. Suggests that some students depended on the color-coding and were unable to read uncolored notation well. (DK)
ERIC Educational Resources Information Center
Maines, Laina L.; Bruch, Martha D.
2012-01-01
General chemistry students often have difficulty writing balanced equations and performing stoichiometry calculations for precipitation reactions, in part because of difficulty understanding the symbolic notation used to represent chemical reactions. We have developed a problem-based experiment to improve student learning of these concepts, and…
NASA Astrophysics Data System (ADS)
Weinberg, Steven
2015-09-01
Preface; Notation; 1. Historical introduction; 2. Particle states in a central potential; 3. General principles of quantum mechanics; 4. Spin; 5. Approximations for energy eigenstates; 6. Approximations for time-dependent problems; 7. Potential scattering; 8. General scattering theory; 9. The canonical formalism; 10. Charged particles in electromagnetic fields; 11. The quantum theory of radiation; 12. Entanglement; Author index; Subject index.
Functional specifications of the annular suspension pointing system, appendix A
NASA Technical Reports Server (NTRS)
Edwards, B.
1980-01-01
The Annular Suspension Pointing System is described. The Design Realization, Evaluation and Modelling (DREAM) system, and its design description technique, the DREAM Design Notation (DDN) is employed.
Notation system and overlay diagrams for the analysis of paced electrocardiograms.
Bernstein, A D; Parsonnet, V
1983-01-01
With the advent of adaptive dual-chamber pacing, the interaction between the pacemaker and the heart is becoming increasingly complex and the interpretation of paced electrocardiograms more difficult. We have developed a set of notation conventions for use in teaching and rhythm-strip analysis. Easily-drawn symbols delineate successful, unsuccessful, and inhibited pacing and sensing events as well as refractory and blanking periods. Another application is to generate movable transparent overlays after programming a pacemaker, to be used in interpreting subsequent rhythm strips.
[Polar and non polar notations of refraction].
Touzeau, O; Gaujoux, T; Costantini, E; Borderie, V; Laroche, L
2010-01-01
Refraction can be expressed by four polar notations which correspond to four different combinations of spherical or cylindrical lenses. Conventional expressions of refraction (plus and minus cylinder notation) are described by sphere, cylinder, and axis. In the plus cylinder notation, the axis visualizes the most powerful meridian. The axis usually corresponds to the bow tie axis in curvature maps. Plus cylinder notation is also valuable for all relaxing procedures (i.e., selective suture ablation, arcuate keratotomy, etc.). In the cross-cylinder notation, two orthogonal cylinders can describe (without the sphere component) the actual refraction of both the principal meridians. This notation must be made before performing the vertex calculation. Using an association of a Jackson cross-cylinder and a spherical equivalent, refraction can be broken down into two pure components: astigmatism and sphere. All polar notations of refraction may perfectly characterize a single refraction but are not suitable for statistical analysis, which requires nonpolar expression. After doubling the axis, a rectangular projection breaks down the Jackson cross-cylinder, which has a polar axis, into two Jackson cross-cylinders on the 0 degrees /90 degrees and 45 degrees /135 degrees axis. This procedure results in the loss of the directional nature of the data. Refraction can be written in a nonpolar notation by three rectangular coordinates (x,y,z), which can also represent the spherocylinder by one point in a dioptric space. These three independent (orthogonal) variables have a concrete optical significance: a spherical component, a direct/inverse (WTR/ATR) component, and an oblique component of the astigmatism. Finally, nonpolar notations are useful for statistical analysis and graphical representation of refraction. Copyright (c) 2009 Elsevier Masson SAS. All rights reserved.
Hurst, Michelle A; Cordes, Sara
2018-04-01
Fraction and decimal concepts are notoriously difficult for children to learn yet are a major component of elementary and middle school math curriculum and an important prerequisite for higher order mathematics (i.e., algebra). Thus, recently there has been a push to understand how children think about rational number magnitudes in order to understand how to promote rational number understanding. However, prior work investigating these questions has focused almost exclusively on fraction notation, overlooking the open questions of how children integrate rational number magnitudes presented in distinct notations (i.e., fractions, decimals, and whole numbers) and whether understanding of these distinct notations may independently contribute to pre-algebra ability. In the current study, we investigated rational number magnitude and arithmetic performance in both fraction and decimal notation in fourth- to seventh-grade children. We then explored how these measures of rational number ability predicted pre-algebra ability. Results reveal that children do represent the magnitudes of fractions and decimals as falling within a single numerical continuum and that, despite greater experience with fraction notation, children are more accurate when processing decimal notation than when processing fraction notation. Regression analyses revealed that both magnitude and arithmetic performance predicted pre-algebra ability, but magnitude understanding may be particularly unique and depend on notation. The educational implications of differences between children in the current study and previous work with adults are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.
Using argument notation to engineer biological simulations with increased confidence
Alden, Kieran; Andrews, Paul S.; Polack, Fiona A. C.; Veiga-Fernandes, Henrique; Coles, Mark C.; Timmis, Jon
2015-01-01
The application of computational and mathematical modelling to explore the mechanics of biological systems is becoming prevalent. To significantly impact biological research, notably in developing novel therapeutics, it is critical that the model adequately represents the captured system. Confidence in adopting in silico approaches can be improved by applying a structured argumentation approach, alongside model development and results analysis. We propose an approach based on argumentation from safety-critical systems engineering, where a system is subjected to a stringent analysis of compliance against identified criteria. We show its use in examining the biological information upon which a model is based, identifying model strengths, highlighting areas requiring additional biological experimentation and providing documentation to support model publication. We demonstrate our use of structured argumentation in the development of a model of lymphoid tissue formation, specifically Peyer's Patches. The argumentation structure is captured using Artoo (www.york.ac.uk/ycil/software/artoo), our Web-based tool for constructing fitness-for-purpose arguments, using a notation based on the safety-critical goal structuring notation. We show how argumentation helps in making the design and structured analysis of a model transparent, capturing the reasoning behind the inclusion or exclusion of each biological feature and recording assumptions, as well as pointing to evidence supporting model-derived conclusions. PMID:25589574
Using argument notation to engineer biological simulations with increased confidence.
Alden, Kieran; Andrews, Paul S; Polack, Fiona A C; Veiga-Fernandes, Henrique; Coles, Mark C; Timmis, Jon
2015-03-06
The application of computational and mathematical modelling to explore the mechanics of biological systems is becoming prevalent. To significantly impact biological research, notably in developing novel therapeutics, it is critical that the model adequately represents the captured system. Confidence in adopting in silico approaches can be improved by applying a structured argumentation approach, alongside model development and results analysis. We propose an approach based on argumentation from safety-critical systems engineering, where a system is subjected to a stringent analysis of compliance against identified criteria. We show its use in examining the biological information upon which a model is based, identifying model strengths, highlighting areas requiring additional biological experimentation and providing documentation to support model publication. We demonstrate our use of structured argumentation in the development of a model of lymphoid tissue formation, specifically Peyer's Patches. The argumentation structure is captured using Artoo (www.york.ac.uk/ycil/software/artoo), our Web-based tool for constructing fitness-for-purpose arguments, using a notation based on the safety-critical goal structuring notation. We show how argumentation helps in making the design and structured analysis of a model transparent, capturing the reasoning behind the inclusion or exclusion of each biological feature and recording assumptions, as well as pointing to evidence supporting model-derived conclusions.
18 CFR 3a.31 - Classification markings and special notations.
Code of Federal Regulations, 2011 CFR
2011-04-01
... unit taking the action. When classification changes are made, the classification markings themselves... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Classification markings... REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION Classification...
Theory of buckling and post-buckling behavior of elastic structures
NASA Technical Reports Server (NTRS)
Budiansky, B.
1974-01-01
The present paper provides a unified, general presentation of the basic theory of the buckling and post-buckling behavior of elastic structures in a form suitable for application to a wide variety of special problems. The notation of functional analysis is used for this purpose. Before the general analysis, simple conceptual models are used to elucidate the basic concepts of bifurcation buckling, snap buckling, imperfection sensitivity, load-shortening relations, and stability. The energy approach, the virtual-work approach, and mode interaction are discussed. The derivations and results are applicable to continua and finite-dimensional systems. The virtual-work and energy approaches are given separate treatments, but their equivalence is made explicit. The basic concepts of stability occupy a secondary position in the present approach.
Suggested notation conventions for rotational seismology
Evans, J.R.
2009-01-01
We note substantial inconsistency among authors discussing rotational motions observed with inertial seismic sensors (and much more so in the broader topic of rotational phenomena). Working from physics and other precedents, we propose standard terminology and a preferred reference frame for inertial sensors (Fig. 1) that may be consistently used in discussions of both finite and infinitesimal observed rotational and translational motions in seismology and earthquake engineering. The scope of this article is limited to observations because there are significant differences in the analysis of finite and infinitesimal rotations, though such discussions should remain compatible with those presented here where possible. We recommend the general use of the notation conventions presented in this tutorial, and we recommend that any deviations or alternatives be explicitly defined.
NASA Astrophysics Data System (ADS)
Marshman, Emily; Singh, Chandralekha
2017-07-01
The expectation value of an observable is an important concept in quantum mechanics since measurement outcomes are, in general, probabilistic and we only have information about the probability distribution of measurement outcomes in a given quantum state of a system. However, we find that upper-level undergraduate and PhD students in physics have both conceptual and procedural difficulties when determining the expectation value of a physical observable in a given quantum state in terms of the eigenstates and eigenvalues of the corresponding operator, especially when using Dirac notation. Here we first describe the difficulties that these students have with determining the expectation value of an observable in Dirac notation. We then discuss how the difficulties found via student responses to written surveys and individual interviews were used as a guide in the development of a quantum interactive learning tutorial (QuILT) to help students develop a good grasp of the expectation value. The QuILT strives to help students integrate conceptual understanding and procedural skills to develop a coherent understanding of the expectation value. We discuss the effectiveness of the QuILT in helping students learn this concept from in-class evaluations.
Kaur, Gagan Deep
2017-05-01
The design process in Kashmiri carpet weaving is distributed over a number of actors and artifacts and is mediated by a weaving notation called talim. The script encodes entire design in practice-specific symbols. This encoded script is decoded and interpreted via design-specific conventions by weavers to weave the design embedded in it. The cognitive properties of this notational system are described in the paper employing cognitive dimensions (CDs) framework of Green (People and computers, Cambridge University Press, Cambridge, 1989) and Blackwell et al. (Cognitive technology: instruments of mind-CT 2001, LNAI 2117, Springer, Berlin, 2001). After introduction to the practice, the design process is described in 'The design process' section which includes coding and decoding of talim. In 'Cognitive dimensions of talim' section, after briefly discussing CDs framework, the specific cognitive dimensions possessed by talim are described in detail.
28 CFR 51.50 - Records concerning submissions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Records concerning submissions. 51.50... concerning submissions. (a) Section 5 files: The Attorney General shall maintain a section 5 file for each... reports, data provided on magnetic media, notations concerning conferences with the submitting authority...
Application of symbolic computations to the constitutive modeling of structural materials
NASA Technical Reports Server (NTRS)
Arnold, Steven M.; Tan, H. Q.; Dong, X.
1990-01-01
In applications involving elevated temperatures, the derivation of mathematical expressions (constitutive equations) describing the material behavior can be quite time consuming, involved and error-prone. Therefore intelligent application of symbolic systems to faciliate this tedious process can be of significant benefit. Presented here is a problem oriented, self contained symbolic expert system, named SDICE, which is capable of efficiently deriving potential based constitutive models in analytical form. This package, running under DOE MACSYMA, has the following features: (1) potential differentiation (chain rule), (2) tensor computations (utilizing index notation) including both algebraic and calculus; (3) efficient solution of sparse systems of equations; (4) automatic expression substitution and simplification; (5) back substitution of invariant and tensorial relations; (6) the ability to form the Jacobian and Hessian matrix; and (7) a relational data base. Limited aspects of invariant theory were also incorporated into SDICE due to the utilization of potentials as a starting point and the desire for these potentials to be frame invariant (objective). The uniqueness of SDICE resides in its ability to manipulate expressions in a general yet pre-defined order and simplify expressions so as to limit expression growth. Results are displayed, when applicable, utilizing index notation. SDICE was designed to aid and complement the human constitutive model developer. A number of examples are utilized to illustrate the various features contained within SDICE. It is expected that this symbolic package can and will provide a significant incentive to the development of new constitutive theories.
1989-06-01
field width, it will be padded on the left (or right, if the left adjustment indicator has been given) to make up the field width. The padding character...is blank (space) normally, and zero if the field width was specified with a leading zero (this zero does not imply an octal field width). 25 " a...unsigned octal notation (without a leading zero ). ’x The argument is coverted to unsigned hexadecimal notation (without a leading Ox). * u The argument is
Generalized Least Squares Estimators in the Analysis of Covariance Structures.
ERIC Educational Resources Information Center
Browne, Michael W.
This paper concerns situations in which a p x p covariance matrix is a function of an unknown q x 1 parameter vector y-sub-o. Notation is defined in the second section, and some algebraic results used in subsequent sections are given. Section 3 deals with asymptotic properties of generalized least squares (G.L.S.) estimators of y-sub-o. Section 4…
Crystallographic and Spectroscopic Symmetry Notations.
ERIC Educational Resources Information Center
Sharma, B. D.
1982-01-01
Compares Schoenflies and Hermann-Mauguin notations of symmetry. Although the former (used by spectroscopists) and latter (used by crystallographers) both describe the same symmetry, there are distinct differences in the manner of description which may lead to confusion in correlating the two notations. (Author/JN)
Service Oriented Architecture for Coast Guard Command and Control
2007-03-01
Operations BPEL4WS The Business Process Execution Language for Web Services BPMN Business Process Modeling Notation CASP Computer Aided Search Planning...Business Process Modeling Notation ( BPMN ) provides a standardized graphical notation for drawing business processes in a workflow. Software tools
2011-01-01
Background The Molecular Interaction Map (MIM) notation offers a standard set of symbols and rules on their usage for the depiction of cellular signaling network diagrams. Such diagrams are essential for disseminating biological information in a concise manner. A lack of software tools for the notation restricts wider usage of the notation. Development of software is facilitated by a more detailed specification regarding software requirements than has previously existed for the MIM notation. Results A formal implementation of the MIM notation was developed based on a core set of previously defined glyphs. This implementation provides a detailed specification of the properties of the elements of the MIM notation. Building upon this specification, a machine-readable format is provided as a standardized mechanism for the storage and exchange of MIM diagrams. This new format is accompanied by a Java-based application programming interface to help software developers to integrate MIM support into software projects. A validation mechanism is also provided to determine whether MIM datasets are in accordance with syntax rules provided by the new specification. Conclusions The work presented here provides key foundational components to promote software development for the MIM notation. These components will speed up the development of interoperable tools supporting the MIM notation and will aid in the translation of data stored in MIM diagrams to other standardized formats. Several projects utilizing this implementation of the notation are outlined herein. The MIM specification is available as an additional file to this publication. Source code, libraries, documentation, and examples are available at http://discover.nci.nih.gov/mim. PMID:21586134
Luna, Augustin; Karac, Evrim I; Sunshine, Margot; Chang, Lucas; Nussinov, Ruth; Aladjem, Mirit I; Kohn, Kurt W
2011-05-17
The Molecular Interaction Map (MIM) notation offers a standard set of symbols and rules on their usage for the depiction of cellular signaling network diagrams. Such diagrams are essential for disseminating biological information in a concise manner. A lack of software tools for the notation restricts wider usage of the notation. Development of software is facilitated by a more detailed specification regarding software requirements than has previously existed for the MIM notation. A formal implementation of the MIM notation was developed based on a core set of previously defined glyphs. This implementation provides a detailed specification of the properties of the elements of the MIM notation. Building upon this specification, a machine-readable format is provided as a standardized mechanism for the storage and exchange of MIM diagrams. This new format is accompanied by a Java-based application programming interface to help software developers to integrate MIM support into software projects. A validation mechanism is also provided to determine whether MIM datasets are in accordance with syntax rules provided by the new specification. The work presented here provides key foundational components to promote software development for the MIM notation. These components will speed up the development of interoperable tools supporting the MIM notation and will aid in the translation of data stored in MIM diagrams to other standardized formats. Several projects utilizing this implementation of the notation are outlined herein. The MIM specification is available as an additional file to this publication. Source code, libraries, documentation, and examples are available at http://discover.nci.nih.gov/mim.
The practical and pedagogical advantages of an ambigraphic nucleic acid notation.
Rozak, David A
2006-01-01
The universally applied IUPAC notation for nucleic acids was adopted primarily to facilitate the mental association of G, A, T, C, and the related ambiguity characters with the bases they represent. However it is possible to create a notation that offers greater support for the basic manipulations and analyses to which genetic sequences frequently are subjected. By designing a nucleic acid notation around ambigrams, it is possible to simplify the frequently applied process of reverse complementation and aid the visualization of palindromes. The ambigraphic notation presented here also uses common orthographic features such as stems and loops to highlight guanine and cytosine rich regions, support the derivation of ambiguity characters, and aid educators in teaching the fundamentals of molecular genetics.
NASA Astrophysics Data System (ADS)
Marshman, Emily; Singh, Chandralekha
2018-01-01
In quantum mechanics, for every physical observable, there is a corresponding Hermitian operator. According to the most common interpretation of quantum mechanics, measurement of an observable collapses the quantum state into one of the possible eigenstates of the operator and the corresponding eigenvalue is measured. Since Dirac notation is an elegant notation that is commonly used in upper-level quantum mechanics, it is important that students learn to express quantum operators corresponding to observables in Dirac notation in order to apply the quantum formalism effectively in diverse situations. Here we focus on an investigation that suggests that, even though Dirac notation is used extensively, many advanced undergraduate and PhD students in physics have difficulty expressing the identity operator and other Hermitian operators corresponding to physical observables in Dirac notation. We first describe the difficulties students have with expressing the identity operator and a generic Hermitian operator corresponding to an observable in Dirac notation. We then discuss how the difficulties found via written surveys and individual interviews were used as a guide in the development of a quantum interactive learning tutorial (QuILT) to help students develop a good grasp of these concepts. The QuILT strives to help students become proficient in expressing the identity operator and a generic Hermitian operator corresponding to an observable in Dirac notation. We also discuss the effectiveness of the QuILT based on in-class evaluations.
Notation Confusion of Symmetry Species for Molecules with Several Large-Amplitude Internal Motions
NASA Astrophysics Data System (ADS)
Groner, P.
2011-06-01
The Mulliken convention has become the standard notation for symmetry species (irreducible representations) of point groups for quasi-rigid molecules. No such convention exists for symmetry species of symmetry groups for semi-rigid or non-rigid molecules with large amplitude internal motions (LAMs). As a result, we have a situation where we create notations in a do-it-yourself fashion or adopt them from the literature, sometimes even without proper reference to its derivation or to the character table on which it is based. This may be just a nuisance for those who are comfortable enough with group theory and molecular symmetry groups to figure "it" out, but it represents a real problem for everybody else. The notation confusion is illustrated with examples from the literature (both old and new) on molecules with two or more LAMs. Most authors use the notation introduced by Myers and Wilson for molecules such as acetone or propane. No universal notation is in use for molecules with two methyl groups but lower overall symmetry. For example, the notation G_1_8 is used for one of these groups. As it turns out, different people use the same notation for different groups. This presentation is an attempt to bring some light into the dark and to combat confusion with a call for an anti-confusion convention. R. S. Mulliken, Phys. Rev. 43, 279 (1933). R. J. Myers, E. B. Wilson, J. Chem. Phys. 33, 186 (1960).
Gebuis, Titia; Herfs, Inkeri K; Kenemans, J Leon; de Haan, Edward H F; van der Smagt, Maarten J
2009-11-01
Infants can visually detect changes in numerosity, which suggests that a (non-symbolic) numerosity system is already present early in life. This non-symbolic system is hypothesized to serve as the basis for the later acquired symbolic system. Little is known about the processes underlying the transition from the non-symbolic to symbolic code. In the current study we investigated the development of automatization of symbolic number processing in children from second (6.0 years) and fourth grade (8.0 years) and adults using a symbolic and non-symbolic size congruency task and event-related potentials (ERPs) as a measure. The comparison between symbolic and non-symbolic size congruency effects (SCEs) allowed us to disentangle processes necessary to perform the task from processes specific to numerosity notation. In contrast to previous studies, second graders already revealed a behavioral symbolic SCE similar to that of adults. In addition, the behavioral SCE increased for symbolic and decreased for non-symbolic notation with increasing age. For all age groups, the ERP data showed that the two magnitudes interfered at a level before selective activation of the response system, for both notations. However, only for the second graders distinct processes were recruited to perform the symbolic size comparison task. This shift in recruited processes for the symbolic task only might reflect the functional specialization of the parietal cortex.
Are Arabic and Verbal Numbers Processed in Different Ways?
ERIC Educational Resources Information Center
Kadosh, Roi Cohen; Henik, Avishai; Rubinsten, Orly
2008-01-01
Four experiments were conducted in order to examine effects of notation--Arabic and verbal numbers--on relevant and irrelevant numerical processing. In Experiment 1, notation interacted with the numerical distance effect, and irrelevant physical size affected numerical processing (i.e., size congruity effect) for both notations but to a lesser…
Scientific Notation Watercolor
ERIC Educational Resources Information Center
Linford, Kyle; Oltman, Kathleen; Daisey, Peggy
2016-01-01
(Purpose) The purpose of this paper is to describe visual literacy, an adapted version of Visual Thinking Strategy (VTS), and an art-integrated middle school mathematics lesson about scientific notation. The intent of this lesson was to provide students with a real life use of scientific notation and exponents, and to motivate them to apply their…
A Notation for Rapid Specification of Information Visualization
ERIC Educational Resources Information Center
Lee, Sang Yun
2013-01-01
This thesis describes a notation for rapid specification of information visualization, which can be used as a theoretical framework of integrating various types of information visualization, and its applications at a conceptual level. The notation is devised to codify the major characteristics of data/visual structures in conventionally-used…
Symbolic, Nonsymbolic and Conceptual: An Across-Notation Study on the Space Mapping of Numerals.
Zhang, Yu; You, Xuqun; Zhu, Rongjuan
2016-07-01
Previous studies suggested that there are interconnections between two numeral modalities of symbolic notation and nonsymbolic notation (array of dots), differences and similarities of the processing, and representation of the two modalities have both been found in previous research. However, whether there are differences between the spatial representation and numeral-space mapping of the two numeral modalities of symbolic notation and nonsymbolic notation is still uninvestigated. The present study aims to examine whether there are differences between the spatial representation and numeral-space mapping of the two numeral modalities of symbolic notation and nonsymbolic notation; especially how zero, as both a symbolic magnitude numeral and a nonsymbolic conceptual numeral, mapping onto space; and if the mapping happens automatically at an early stage of the numeral information processing. Results of the two experiments demonstrate that the low-level processing of symbolic numerals including zero and nonsymbolic numerals except zero can mapping onto space, whereas the low-level processing of nonsymbolic zero as a semantic conceptual numeral cannot mapping onto space, which indicating the specialty of zero in the numeral domain. The present study indicates that the processing of non-semantic numerals can mapping onto space, whereas semantic conceptual numerals cannot mapping onto space. © The Author(s) 2016.
Disciplinary Notations: Where Do We Go from Here?
ERIC Educational Resources Information Center
Wold-McCormick, Kristi
2018-01-01
Few higher education topics have garnered as much interest in recent years as behavioral misconduct and disciplinary notifications. Academic, student affairs, and enrollment management professionals along with legislators and the general public have all had an interest in and voice on these issues. An American Association of Collegiate Registrars…
Abstract Numeric Relations and the Visual Structure of Algebra
ERIC Educational Resources Information Center
Landy, David; Brookes, David; Smout, Ryan
2014-01-01
Formal algebras are among the most powerful and general mechanisms for expressing quantitative relational statements; yet, even university engineering students, who are relatively proficient with algebraic manipulation, struggle with and often fail to correctly deploy basic aspects of algebraic notation (Clement, 1982). In the cognitive tradition,…
ERIC Educational Resources Information Center
Girill, T. R.
1972-01-01
The Boyle-Mariotte gas law was formulated in terms of pneumatic springs," subsumed by Hooke under his own stress-strain relation, and generally regarded as a law of elasticity. The subsequent development of Boyle's principle and elasticity provide thought-provoking test cases for Kuhn's notations of paradigm and puzzle solving in physics.…
Music Learning in Your School Computer Lab.
ERIC Educational Resources Information Center
Reese, Sam
1998-01-01
States that a growing number of schools are installing general computer labs equipped to use notation, accompaniment, and sequencing software independent of MIDI keyboards. Discusses (1) how to configure the software without MIDI keyboards or external sound modules, (2) using the actual MIDI software, (3) inexpensive enhancements, and (4) the…
NASA Technical Reports Server (NTRS)
Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.
2005-01-01
A general-purpose method to mechanically transform system requirements into a probably equivalent model has yet to appeal: Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including sensor networks and autonomous systems. Currently available tools and methods that start with a formal model of a system and mechanically produce a probably equivalent implementation are valuable but not su8cient. The "gap" unfilled by such tools and methods is that their. formal models cannot be proven to be equivalent to the system requirements as originated by the customel: For the classes of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a probably equivalent formal model that can be used as the basis for code generation and other transformations.
Modeling biochemical transformation processes and information processing with Narrator.
Mandel, Johannes J; Fuss, Hendrik; Palfreyman, Niall M; Dubitzky, Werner
2007-03-27
Software tools that model and simulate the dynamics of biological processes and systems are becoming increasingly important. Some of these tools offer sophisticated graphical user interfaces (GUIs), which greatly enhance their acceptance by users. Such GUIs are based on symbolic or graphical notations used to describe, interact and communicate the developed models. Typically, these graphical notations are geared towards conventional biochemical pathway diagrams. They permit the user to represent the transport and transformation of chemical species and to define inhibitory and stimulatory dependencies. A critical weakness of existing tools is their lack of supporting an integrative representation of transport, transformation as well as biological information processing. Narrator is a software tool facilitating the development and simulation of biological systems as Co-dependence models. The Co-dependence Methodology complements the representation of species transport and transformation together with an explicit mechanism to express biological information processing. Thus, Co-dependence models explicitly capture, for instance, signal processing structures and the influence of exogenous factors or events affecting certain parts of a biological system or process. This combined set of features provides the system biologist with a powerful tool to describe and explore the dynamics of life phenomena. Narrator's GUI is based on an expressive graphical notation which forms an integral part of the Co-dependence Methodology. Behind the user-friendly GUI, Narrator hides a flexible feature which makes it relatively easy to map models defined via the graphical notation to mathematical formalisms and languages such as ordinary differential equations, the Systems Biology Markup Language or Gillespie's direct method. This powerful feature facilitates reuse, interoperability and conceptual model development. Narrator is a flexible and intuitive systems biology tool. It is specifically intended for users aiming to construct and simulate dynamic models of biology without recourse to extensive mathematical detail. Its design facilitates mappings to different formal languages and frameworks. The combined set of features makes Narrator unique among tools of its kind. Narrator is implemented as Java software program and available as open-source from http://www.narrator-tool.org.
Modeling biochemical transformation processes and information processing with Narrator
Mandel, Johannes J; Fuß, Hendrik; Palfreyman, Niall M; Dubitzky, Werner
2007-01-01
Background Software tools that model and simulate the dynamics of biological processes and systems are becoming increasingly important. Some of these tools offer sophisticated graphical user interfaces (GUIs), which greatly enhance their acceptance by users. Such GUIs are based on symbolic or graphical notations used to describe, interact and communicate the developed models. Typically, these graphical notations are geared towards conventional biochemical pathway diagrams. They permit the user to represent the transport and transformation of chemical species and to define inhibitory and stimulatory dependencies. A critical weakness of existing tools is their lack of supporting an integrative representation of transport, transformation as well as biological information processing. Results Narrator is a software tool facilitating the development and simulation of biological systems as Co-dependence models. The Co-dependence Methodology complements the representation of species transport and transformation together with an explicit mechanism to express biological information processing. Thus, Co-dependence models explicitly capture, for instance, signal processing structures and the influence of exogenous factors or events affecting certain parts of a biological system or process. This combined set of features provides the system biologist with a powerful tool to describe and explore the dynamics of life phenomena. Narrator's GUI is based on an expressive graphical notation which forms an integral part of the Co-dependence Methodology. Behind the user-friendly GUI, Narrator hides a flexible feature which makes it relatively easy to map models defined via the graphical notation to mathematical formalisms and languages such as ordinary differential equations, the Systems Biology Markup Language or Gillespie's direct method. This powerful feature facilitates reuse, interoperability and conceptual model development. Conclusion Narrator is a flexible and intuitive systems biology tool. It is specifically intended for users aiming to construct and simulate dynamic models of biology without recourse to extensive mathematical detail. Its design facilitates mappings to different formal languages and frameworks. The combined set of features makes Narrator unique among tools of its kind. Narrator is implemented as Java software program and available as open-source from . PMID:17389034
Requirements to Design to Code: Towards a Fully Formal Approach to Automatic Code Generation
NASA Technical Reports Server (NTRS)
Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.
2004-01-01
A general-purpose method to mechanically transform system requirements into a provably equivalent model has yet to appear. Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including sensor networks and autonomous systems. Currently available tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The gap that current tools and methods leave unfilled is that their formal models cannot be proven to be equivalent to the system requirements as originated by the customer. For the classes of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations.
Using Graphical Notations to Assess Children's Experiencing of Simple and Complex Musical Fragments
ERIC Educational Resources Information Center
Verschaffel, Lieven; Reybrouck, Mark; Janssens, Marjan; Van Dooren, Wim
2010-01-01
The aim of this study was to analyze children's graphical notations as external representations of their experiencing when listening to simple sonic stimuli and complex musical fragments. More specifically, we assessed the impact of four factors on children's notations: age, musical background, complexity of the fragment, and most salient…
Music-Notation Searching and Digital Libraries.
ERIC Educational Resources Information Center
Byrd, Donald
Almost all work on music information retrieval to date has concentrated on music in the audio and event (normally MIDI) domains. However, music in the form of notation, especially Conventional Music Notation (CMN), is of much interest to musically trained persons, both amateurs and professionals, and searching CMN has great value for digital music…
Skin notation in the context of workplace exposure standards
DOE Office of Scientific and Technical Information (OSTI.GOV)
Scansetti, G.; Piolatto, G.; Rubino, G.F.
1988-01-01
In the establishment of workplace exposure standards, the potential for cutaneous absorption is taken into consideration through the addition of skin notation to the relevant substance. In the TLVs Documentation (ACGIH, 1986) dermal lethal dose to 50% (LD50) or human data are the bases for the assignment of skin notation to 91 of 168 substances. For the other substances, the skin attribution seems to be based on undocumented statements in 24 (14.5%), skin effects in 13 (8%), and analogy in 7 (4%), while in the remaining 33 (20%) any reference is lacking as to the basis for notation of themore » cutaneous route of entry. Furthermore, since the established cut-off value of 2 g/kg is sometimes bypassed when a notation is added or omitted, the use of dermal LD50 is perplexing. Given the relevance of the skin notation for the validation of threshold limit values (TLVs) in the workplace, a full examination and citation of all available scientific data are recommended when establishing the TLV of substances absorbable through the skin.« less
Rational-number comparison across notation: Fractions, decimals, and whole numbers.
Hurst, Michelle; Cordes, Sara
2016-02-01
Although fractions, decimals, and whole numbers can be used to represent the same rational-number values, it is unclear whether adults conceive of these rational-number magnitudes as lying along the same ordered mental continuum. In the current study, we investigated whether adults' processing of rational-number magnitudes in fraction, decimal, and whole-number notation show systematic ratio-dependent responding characteristic of an integrated mental continuum. Both reaction time (RT) and eye-tracking data from a number-magnitude comparison task revealed ratio-dependent performance when adults compared the relative magnitudes of rational numbers, both within the same notation (e.g., fractions vs. fractions) and across different notations (e.g., fractions vs. decimals), pointing to an integrated mental continuum for rational numbers across notation types. In addition, eye-tracking analyses provided evidence of an implicit whole-number bias when we compared values in fraction notation, and individual differences in this whole-number bias were related to the individual's performance on a fraction arithmetic task. Implications of our results for both cognitive development research and math education are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
A graphical language for reliability model generation
NASA Technical Reports Server (NTRS)
Howell, Sandra V.; Bavuso, Salvatore J.; Haley, Pamela J.
1990-01-01
A graphical interface capability of the hybrid automated reliability predictor (HARP) is described. The graphics-oriented (GO) module provides the user with a graphical language for modeling system failure modes through the selection of various fault tree gates, including sequence dependency gates, or by a Markov chain. With this graphical input language, a fault tree becomes a convenient notation for describing a system. In accounting for any sequence dependencies, HARP converts the fault-tree notation to a complex stochastic process that is reduced to a Markov chain which it can then solve for system reliability. The graphics capability is available for use on an IBM-compatible PC, a Sun, and a VAX workstation. The GO module is written in the C programming language and uses the Graphical Kernel System (GKS) standard for graphics implementation. The PC, VAX, and Sun versions of the HARP GO module are currently in beta-testing.
19 CFR 125.34 - Countersigning of documents and notation of bad order or discrepancy.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 19 Customs Duties 1 2010-04-01 2010-04-01 false Countersigning of documents and notation of bad... and Receipt § 125.34 Countersigning of documents and notation of bad order or discrepancy. When a... and shall note thereon any bad order or discrepancy. When available, the importing carrier's tally...
From Depiction to Notation: How Children Use Symbols to Represent Objects and Events
ERIC Educational Resources Information Center
Eskritt, Michelle; Olson, David
2012-01-01
The purpose of the present study was to explore children's understanding of external symbols by examining the relationship between children's production and comprehension of graphic notations and verbal messages. Fifty-six children between the ages of 5 and 7 years were asked to produce both notations and a spoken message relaying to their…
Teaching Movable "Du": Guidelines for Developing Enrhythmic Reading Skills
ERIC Educational Resources Information Center
Dalby, Bruce
2015-01-01
Reading music notation with fluency is a complex skill requiring well-founded instruction by the music teacher and diligent practice on the part of the learner. The task is complicated by the fact that there are multiple ways to notate a given rhythm. Beginning music students typically have their first encounter with enrhythmic notation when they…
Evaluation of PROforma as a language for implementing medical guidelines in a practical context
Sutton, David R; Taylor, Paul; Earle, Kenneth
2006-01-01
Background PROforma is one of several languages that allow clinical guidelines to be expressed in a computer-interpretable manner. How these languages should be compared, and what requirements they should meet, are questions that are being actively addressed by a community of interested researchers. Methods We have developed a system to allow hypertensive patients to be monitored and assessed without visiting their GPs (except in the most urgent cases). Blood pressure measurements are performed at the patients' pharmacies and a web-based system, created using PROforma, makes recommendations for continued monitoring, and/or changes in medication. The recommendations and measurements are transmitted electronically to a practitioner with authority to issue and change prescriptions. We evaluated the use of PROforma during the knowledge acquisition, analysis, design and implementation of this system. The analysis focuses on the logical adequacy, heuristic power, notational convenience, and explanation support provided by the PROforma language. Results PROforma proved adequate as a language for the implementation of the clinical reasoning required by this project. However a lack of notational convenience led us to use UML activity diagrams, rather than PROforma process descriptions, to create the models that were used during the knowledge acquisition and analysis phases of the project. These UML diagrams were translated into PROforma during the implementation of the project. Conclusion The experience accumulated during this study highlighted the importance of structure preserving design, that is to say that the models used in the design and implementation of a knowledge-based system should be structurally similar to those created during knowledge acquisition and analysis. Ideally the same language should be used for all of these models. This means that great importance has to be attached to the notational convenience of these languages, by which we mean the ease with which they can be read, written, and understood by human beings. The importance of notational convenience arises from the fact that a language used during knowledge acquisition and analysis must be intelligible to the potential users of a system, and to the domain experts who provide the knowledge that will be used in its construction. PMID:16597341
Evaluation of PROforma as a language for implementing medical guidelines in a practical context.
Sutton, David R; Taylor, Paul; Earle, Kenneth
2006-04-05
PROforma is one of several languages that allow clinical guidelines to be expressed in a computer-interpretable manner. How these languages should be compared, and what requirements they should meet, are questions that are being actively addressed by a community of interested researchers. We have developed a system to allow hypertensive patients to be monitored and assessed without visiting their GPs (except in the most urgent cases). Blood pressure measurements are performed at the patients' pharmacies and a web-based system, created using PROforma, makes recommendations for continued monitoring, and/or changes in medication. The recommendations and measurements are transmitted electronically to a practitioner with authority to issue and change prescriptions. We evaluated the use of PROforma during the knowledge acquisition, analysis, design and implementation of this system. The analysis focuses on the logical adequacy, heuristic power, notational convenience, and explanation support provided by the PROforma language. PROforma proved adequate as a language for the implementation of the clinical reasoning required by this project. However a lack of notational convenience led us to use UML activity diagrams, rather than PROforma process descriptions, to create the models that were used during the knowledge acquisition and analysis phases of the project. These UML diagrams were translated into PROforma during the implementation of the project. The experience accumulated during this study highlighted the importance of structure preserving design, that is to say that the models used in the design and implementation of a knowledge-based system should be structurally similar to those created during knowledge acquisition and analysis. Ideally the same language should be used for all of these models. This means that great importance has to be attached to the notational convenience of these languages, by which we mean the ease with which they can be read, written, and understood by human beings. The importance of notational convenience arises from the fact that a language used during knowledge acquisition and analysis must be intelligible to the potential users of a system, and to the domain experts who provide the knowledge that will be used in its construction.
17 CFR 270.0-2 - General requirements of papers and applications.
Code of Federal Regulations, 2014 CFR
2014-04-01
... necessary to authorize the undersigned to execute and file such instrument has been taken. The undersigned... may be present) by handwritten, typed, printed, or other legible form of notation from the facing page of the document through the last page of that document and any exhibits or attachments thereto...
17 CFR 270.0-2 - General requirements of papers and applications.
Code of Federal Regulations, 2013 CFR
2013-04-01
... necessary to authorize the undersigned to execute and file such instrument has been taken. The undersigned... may be present) by handwritten, typed, printed, or other legible form of notation from the facing page of the document through the last page of that document and any exhibits or attachments thereto...
Applying Modeling Tools to Ground System Procedures
NASA Technical Reports Server (NTRS)
Di Pasquale, Peter
2012-01-01
As part of a long-term effort to revitalize the Ground Systems (GS) Engineering Section practices, Systems Modeling Language (SysML) and Business Process Model and Notation (BPMN) have been used to model existing GS products and the procedures GS engineers use to produce them.
ERIC Educational Resources Information Center
Elyagutu, Dilek Cantekin; Hazar, Muhsin
2017-01-01
In this research, Movement Notation (Laban) and Traditional Method in Folk dance Teaching were compared in terms of learning success. Movement notation group (n = 14) and Traditional group (n = 14) consisting of students from the S.U. State Conservatory Turkish Folk Dance Department were formed. During the 14-week-long study, the symbols of the…
ERIC Educational Resources Information Center
Hewitt, Dave
2014-01-01
This article analyzes the use of the software Grid Algebra with a mixed ability class of 21 nine-to-ten-year-old students who worked with complex formal notation involving all four arithmetic operations. Unlike many other models to support learning, Grid Algebra has formal notation ever present and allows students to "look through" that…
Writing about Music: The Selection and Arrangement of Notation in Jazz Students' Written Texts
ERIC Educational Resources Information Center
Martin, Jodie L.
2018-01-01
Music notation is intrinsic in the composition and performance of Western art music and also in its analysis and research. The process of writing about music remains underexplored, in particular how excerpts of music notation are selected and arranged in a written text, and how that text describes and contextualises the excerpts. This article…
Community of Interest Engagement Process Plan
2012-02-09
and input from Subject Matter Experts (SMEs), as shown in the far left of Figure 2. The team may prepare a Business Process Model Notation ( BPMN ) 22...22 Business Process Modeling Notation ( BPMN ) is a method of illustrating business processes in the form of a...Community of Interest Engagement Plan Joint Planning and Development Office 21 10. Acronyms BPMN Business Process Modeling Notation COI
The Cooperate Assistive Teamwork Environment for Software Description Languages.
Groenda, Henning; Seifermann, Stephan; Müller, Karin; Jaworek, Gerhard
2015-01-01
Versatile description languages such as the Unified Modeling Language (UML) are commonly used in software engineering across different application domains in theory and practice. They often use graphical notations and leverage visual memory for expressing complex relations. Those notations are hard to access for people with visual impairment and impede their smooth inclusion in an engineering team. Existing approaches provide textual notations but require manual synchronization between the notations. This paper presents requirements for an accessible and language-aware team work environment as well as our plan for the assistive implementation of Cooperate. An industrial software engineering team consisting of people with and without visual impairment will evaluate the implementation.
BPMN, Toolsets, and Methodology: A Case Study of Business Process Management in Higher Education
NASA Astrophysics Data System (ADS)
Barn, Balbir S.; Oussena, Samia
This chapter describes ongoing action research which is exploring the use of BPMN and a specific toolset - Intalio Designer to capture the “as is” essential process model of part of an overarching large business process within higher education. The chapter contends that understanding the efficacy of the BPMN notation and the notational elements to use is not enough. Instead, the effectiveness of a notation is determined by the notation, the toolset that is being used, and methodological consideration. The chapter presents some of the challenges that are faced in attempting to develop computation independent models in BPMN using toolsets such as Intalio Designer™.
A Flexible, Extensible Online Testing System for Mathematics
ERIC Educational Resources Information Center
Passmore, Tim; Brookshaw, Leigh; Butler, Harry
2011-01-01
An online testing system developed for entry-skills testing of first-year university students in algebra and calculus is described. The system combines the open-source computer algebra system "Maxima" with computer scripts to parse student answers, which are entered using standard mathematical notation and conventions. The answers can…
Mission Assurance in a Distributed Environment
2009-06-01
Notation ( BPMN ) – Graphical representation of business processes in a workflow • Unified Modeling Language (UML) – Use standard UML diagrams to model the system – Component, sequence, activity diagrams
Loya, Salvador Rodriguez; Kawamoto, Kensaku; Chatwin, Chris; Huser, Vojtech
2014-12-01
The use of a service-oriented architecture (SOA) has been identified as a promising approach for improving health care by facilitating reliable clinical decision support (CDS). A review of the literature through October 2013 identified 44 articles on this topic. The review suggests that SOA related technologies such as Business Process Model and Notation (BPMN) and Service Component Architecture (SCA) have not been generally adopted to impact health IT systems' performance for better care solutions. Additionally, technologies such as Enterprise Service Bus (ESB) and architectural approaches like Service Choreography have not been generally exploited among researchers and developers. Based on the experience of other industries and our observation of the evolution of SOA, we found that the greater use of these approaches have the potential to significantly impact SOA implementations for CDS.
Electronic Warfare and Radar Systems Engineering Handbook
1999-04-01
EWRL Electronic Warfare Reprogrammable ELNOT Emitter Library Notation Library (USN) EM Electromagnetic EWSI EW Systems Integration E-Mail Electronic...ram air turbine (RAT) propellers used to power aircraft pods, helicopter rotor blades, and protruding surfaces of automobile hubcaps will all provide
Ricketts, D N J; Scott, B J J; Ali, A; Chadwick, R G; Murray, C A; Radford, J R; Saunders, W P
2003-10-11
A peer review study was carried out to assess the written communication between consultants and specialist registrars in restorative dentistry with the referring general dental practitioners. Seven people took part in the study and each presented referral and reply letters for five patients whom they had seen for consultation. The referral letters were used for information only and were not used in the peer review process. Each participant inspected the referral and reply letters from the other six participants. The reply letters were anonymously peer reviewed by using a proforma containing agreed criteria in relation to appropriate factors to include in the reply letter. The reviewer also ranked the letter in relation to overall quality on a 1-10 point scale. It was found that the participants' letters generally conformed positively with the agreed criteria although there were some differences between individuals. There were particular problems identified in relation to tooth notation. Reply letters commonly used different forms of tooth notation to the referring practitioners. The ranking of the letters generally indicated that the participants' replies were judged to be favourable by their peers. There may be scope for continuing this study in relation to peer review by other groups of professionals, in particular practitioners in primary dental care.
49 CFR 1242.05 - Operating expense account number notation.
Code of Federal Regulations, 2010 CFR
2010-10-01
... expense categories are utilized. The categories are: salaries and wages (account 11-XX-XX); material, tools, supplies, fuels and lubricants (account 21-XX-XX); purchased services (accounts 31-XX-XX to 41-XX-XX, inclusive); and general (accounts 61-XX-XX to 65-XX-XX, inclusive, 51-XX-XX, 52-XX-XX, 53-XX-XX...
Theories of Notation and Polar Motion I,
1980-12-01
relative motions such as ocean currents and winds, as we shall do. For the consideration of such effects see (Munk and Macdonald, 1960, p. 123; Lambeck...n)e ,uite general and niot irestricted to a solid body. In Fact, we na~it also in toe Poi ncar model . The equation K 12-1:: no;s the exponencial
Academic Music: Music Instruction to Engage Third-Grade Students in Learning Basic Fraction Concepts
ERIC Educational Resources Information Center
Courey, Susan Joan; Balogh, Endre; Siker, Jody Rebecca; Paik, Jae
2012-01-01
This study examined the effects of an academic music intervention on conceptual understanding of music notation, fraction symbols, fraction size, and equivalency of third graders from a multicultural, mixed socio-economic public school setting. Students (N = 67) were assigned by class to their general education mathematics program or to receive…
NASA Technical Reports Server (NTRS)
Warren, W. H., Jr.
1982-01-01
The contents and format of the machine-readable version of the cataloque distributed by the Astronomical Data Center are described. Coding for the various scales and abbreviations used in the catalogue are tabulated and certain revisions to the machine version made to improve storage efficiency and notation are discussed.
Communication Problems in Requirements Engineering: A Field Study
NASA Technical Reports Server (NTRS)
Al-Rawas, Amer; Easterbrook, Steve
1996-01-01
The requirements engineering phase of software development projects is characterized by the intensity and importance of communication activities. During this phase, the various stakeholders must be able to communicate their requirements to the analysts, and the analysts need to be able to communicate the specifications they generate back to the stakeholders for validation. This paper describes a field investigation into the problems of communication between disparate communities involved in the requirements specification activities. The results of this study are discussed in terms of their relation to three major communication barriers: (1) ineffectiveness of the current communication channels; (2) restrictions on expressiveness imposed by notations; and (3) social and organizational barriers. The results confirm that organizational and social issues have great influence on the effectiveness of communication. They also show that in general, end-users find the notations used by software practitioners to model their requirements difficult to understand and validate.
2014-01-01
Background Ambiscript is a graphically-designed nucleic acid notation that uses symbol symmetries to support sequence complementation, highlight biologically-relevant palindromes, and facilitate the analysis of consensus sequences. Although the original Ambiscript notation was designed to easily represent consensus sequences for multiple sequence alignments, the notation’s black-on-white ambiguity characters are unable to reflect the statistical distribution of nucleotides found at each position. We now propose a color-augmented ambigraphic notation to encode the frequency of positional polymorphisms in these consensus sequences. Results We have implemented this color-coding approach by creating an Adobe Flash® application ( http://www.ambiscript.org) that shades and colors modified Ambiscript characters according to the prevalence of the encoded nucleotide at each position in the alignment. The resulting graphic helps viewers perceive biologically-relevant patterns in multiple sequence alignments by uniquely combining color, shading, and character symmetries to highlight palindromes and inverted repeats in conserved DNA motifs. Conclusion Juxtaposing an intuitive color scheme over the deliberate character symmetries of an ambigraphic nucleic acid notation yields a highly-functional nucleic acid notation that maximizes information content and successfully embodies key principles of graphic excellence put forth by the statistician and graphic design theorist, Edward Tufte. PMID:24447494
A UML profile for the OBO relation ontology.
Guardia, Gabriela D A; Vêncio, Ricardo Z N; de Farias, Cléver R G
2012-01-01
Ontologies have increasingly been used in the biomedical domain, which has prompted the emergence of different initiatives to facilitate their development and integration. The Open Biological and Biomedical Ontologies (OBO) Foundry consortium provides a repository of life-science ontologies, which are developed according to a set of shared principles. This consortium has developed an ontology called OBO Relation Ontology aiming at standardizing the different types of biological entity classes and associated relationships. Since ontologies are primarily intended to be used by humans, the use of graphical notations for ontology development facilitates the capture, comprehension and communication of knowledge between its users. However, OBO Foundry ontologies are captured and represented basically using text-based notations. The Unified Modeling Language (UML) provides a standard and widely-used graphical notation for modeling computer systems. UML provides a well-defined set of modeling elements, which can be extended using a built-in extension mechanism named Profile. Thus, this work aims at developing a UML profile for the OBO Relation Ontology to provide a domain-specific set of modeling elements that can be used to create standard UML-based ontologies in the biomedical domain.
An investigation of modelling and design for software service applications.
Anjum, Maria; Budgen, David
2017-01-01
Software services offer the opportunity to use a component-based approach for the design of applications. However, this needs a deeper understanding of how to develop service-based applications in a systematic manner, and of the set of properties that need to be included in the 'design model'. We have used a realistic application to explore systematically how service-based designs can be created and described. We first identified the key properties of an SOA (service oriented architecture) and then undertook a single-case case study to explore its use in the development of a design for a large-scale application in energy engineering, modelling this with existing notations wherever possible. We evaluated the resulting design model using two walkthroughs with both domain and application experts. We were able to successfully develop a design model around the ten properties identified, and to describe it by adapting existing design notations. A component-based approach to designing such systems does appear to be feasible. However, it needs the assistance of a more integrated set of notations for describing the resulting design model.
An investigation of modelling and design for software service applications
2017-01-01
Software services offer the opportunity to use a component-based approach for the design of applications. However, this needs a deeper understanding of how to develop service-based applications in a systematic manner, and of the set of properties that need to be included in the ‘design model’. We have used a realistic application to explore systematically how service-based designs can be created and described. We first identified the key properties of an SOA (service oriented architecture) and then undertook a single-case case study to explore its use in the development of a design for a large-scale application in energy engineering, modelling this with existing notations wherever possible. We evaluated the resulting design model using two walkthroughs with both domain and application experts. We were able to successfully develop a design model around the ten properties identified, and to describe it by adapting existing design notations. A component-based approach to designing such systems does appear to be feasible. However, it needs the assistance of a more integrated set of notations for describing the resulting design model. PMID:28489905
When intelligence is in control
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bellman, K.L.
Each time a discipline redefines itself, I look at it as a sign of growth, because often such redefinition means that there is new theory, new methods, or new {open_quotes}disciples{close_quote} from other disciplines who are stretching, enlarging, and deepening the field. Such is the case with semiotics. Deeply entwined with the concepts of {open_quotes}intelligent systems{close_quotes}, {open_quotes}intelligent control{close_quotes}, and complex systems theory, semiotics struggles to develop representations, notations (systems of representations), and models (functionally-oriented sets of related representations) to study systems that may or may not be usefully described as employing representations, notations, and models themselves. That last, of course, ismore » the main problem that semiotics faces. Semiotics, like psychology, philosophy, or any other self-referential discipline, is burdened by the eye attempting to study the eye or the mind studying the mind, or more to the point here, the modeler studying the modeling acts of others.« less
Requirements to Design to Code: Towards a Fully Formal Approach to Automatic Code Generation
NASA Technical Reports Server (NTRS)
Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.
2005-01-01
A general-purpose method to mechanically transform system requirements into a provably equivalent model has yet to appear. Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including distributed software systems, sensor networks, robot operation, complex scripts for spacecraft integration and testing, and autonomous systems. Currently available tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The gap that current tools and methods leave unfilled is that their formal models cannot be proven to be equivalent to the system requirements as originated by the customer. For the classes of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations.
Requirements to Design to Code: Towards a Fully Formal Approach to Automatic Code Generation
NASA Technical Reports Server (NTRS)
Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.
2005-01-01
A general-purpose method to mechanically transform system requirements into a provably equivalent model has yet to appear. Such a method represents a necessary step toward high-dependability system engineering for numerous possible application domains, including distributed software systems, sensor networks, robot operation, complex scripts for spacecraft integration and testing, and autonomous systems. Currently available tools and methods that start with a formal model of a: system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The "gap" that current tools and methods leave unfilled is that their formal models cannot be proven to be equivalent to the system requirements as originated by the customer. For the ciasses of systems whose behavior can be described as a finite (but significant) set of scenarios, we offer a method for mechanically transforming requirements (expressed in restricted natural language, or in other appropriate graphical notations) into a provably equivalent formal model that can be used as the basis for code generation and other transformations.
A Formal Approach to Requirements-Based Programming
NASA Technical Reports Server (NTRS)
Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.
2005-01-01
No significant general-purpose method is currently available to mechanically transform system requirements into a provably equivalent model. The widespread use of such a method represents a necessary step toward high-dependability system engineering for numerous application domains. Current tools and methods that start with a formal model of a system and mechanically produce a provably equivalent implementation are valuable but not sufficient. The "gap" unfilled by such tools and methods is that the formal models cannot be proven to be equivalent to the requirements. We offer a method for mechanically transforming requirements into a provably equivalent formal model that can be used as the basis for code generation and other transformations. This method is unique in offering full mathematical tractability while using notations and techniques that are well known and well trusted. Finally, we describe further application areas we are investigating for use of the approach.
Lambda: A Mathematica package for operator product expansions in vertex algebras
NASA Astrophysics Data System (ADS)
Ekstrand, Joel
2011-02-01
We give an introduction to the Mathematica package Lambda, designed for calculating λ-brackets in both vertex algebras, and in SUSY vertex algebras. This is equivalent to calculating operator product expansions in two-dimensional conformal field theory. The syntax of λ-brackets is reviewed, and some simple examples are shown, both in component notation, and in N=1 superfield notation. Program summaryProgram title: Lambda Catalogue identifier: AEHF_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHF_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 18 087 No. of bytes in distributed program, including test data, etc.: 131 812 Distribution format: tar.gz Programming language: Mathematica Computer: See specifications for running Mathematica V7 or above. Operating system: See specifications for running Mathematica V7 or above. RAM: Varies greatly depending on calculation to be performed. Classification: 4.2, 5, 11.1. Nature of problem: Calculate operator product expansions (OPEs) of composite fields in 2d conformal field theory. Solution method: Implementation of the algebraic formulation of OPEs given by vertex algebras, and especially by λ-brackets. Running time: Varies greatly depending on calculation requested. The example notebook provided takes about 3 s to run.
Instance-Based Question Answering
2006-12-01
answer clustering, composition, and scoring. Moreover, with the effort dedicated to improving monolingual system performance, system parameters are...text collections: document type, manual or automatic annotations (if any), and stylistic and notational differences in technical terms. Monolingual ...forum in which cross language retrieval systems and question answering systems are tested for various Eu- ropean languages. The CLEF QA monolingual task
Number word structure in first and second language influences arithmetic skills
Prior, Anat; Katz, Michal; Mahajna, Islam; Rubinsten, Orly
2015-01-01
Languages differ in how they represent numerical information, and specifically whether the verbal notation of numbers follows the same order as the symbolic notation (in non-inverted languages, e.g., Hebrew, “25, twenty-five”) or whether the two notations diverge (in inverted languages, e.g., Arabic, “25, five-and-twenty”). We examined how the structure of number–words affects how arithmetic operations are processed by bilingual speakers of an inverted and a non-inverted language. We examined Arabic–Hebrew bilinguals’ performance in the first language, L1 (inverted) and in the second language, L2 (non-inverted). Their performance was compared to that of Hebrew L1 speakers, who do not speak an inverted language. Participants judged the accuracy of addition problems presented aurally in L1, aurally in L2 or in visual symbolic notation. Problems were presented such that they matched or did not match the structure of number words in the language. Arabic–Hebrew bilinguals demonstrated both flexibility in processing and adaptation to the language of aural–verbal presentation – they were more accurate for the inverted order of presentation in Arabic, but more accurate for non-inverted order of presentation in Hebrew, thus exhibiting the same pattern found for native Hebrew speakers. In addition, whereas native Hebrew speakers preferred the non-inverted order in visual symbolic presentation as well, the Arabic–Hebrew bilinguals showed enhanced flexibility, without a significant preference for one order over the other, in either speed or accuracy. These findings suggest that arithmetic processing is sensitive to the linguistic representations of number words. Moreover, bilinguals exposed to inverted and non-inverted languages showed influence of both systems, and enhanced flexibility in processing. Thus, the L1 does not seem to have exclusive power in shaping numerical mental representations, but rather the system remains open to influences from a later learned L2. PMID:25852591
Abstract for 1999 Rational Software User Conference
NASA Technical Reports Server (NTRS)
Dunphy, Julia; Rouquette, Nicolas; Feather, Martin; Tung, Yu-Wen
1999-01-01
We develop spacecraft fault-protection software at NASA/JPL. Challenges exemplified by our task: 1) high-quality systems - need for extensive validation & verification; 2) multi-disciplinary context - involves experts from diverse areas; 3) embedded systems - must adapt to external practices, notations, etc.; and 4) development pressures - NASA's mandate of "better, faster, cheaper".
Goal Structuring Notation in a Radiation Hardening Assurance Case for COTS-Based Spacecraft
NASA Technical Reports Server (NTRS)
Witulski, A.; Austin, R.; Evans, J.; Mahadevan, N.; Karsai, G.; Sierawski, B.; LaBel, K.; Reed, R.
2016-01-01
The attached presentation is a summary of how mission assurance is supported by model-based representations of spacecraft systems that can define sub-system functionality and interfacing, reliability parameters, as well as detailing a new paradigm for assurance, a model-centric and not document-centric process.
Hallucinations of musical notation.
Sacks, Oliver
2013-07-01
Hallucinations of musical notation may occur in a variety of conditions, including Charles Bonnet syndrome, Parkinson's disease, fever, intoxications, hypnagogic and hypnopompic states. Eight cases are described here, and their possible cerebral mechanisms discussed.
Graphical workstation capability for reliability modeling
NASA Technical Reports Server (NTRS)
Bavuso, Salvatore J.; Koppen, Sandra V.; Haley, Pamela J.
1992-01-01
In addition to computational capabilities, software tools for estimating the reliability of fault-tolerant digital computer systems must also provide a means of interfacing with the user. Described here is the new graphical interface capability of the hybrid automated reliability predictor (HARP), a software package that implements advanced reliability modeling techniques. The graphics oriented (GO) module provides the user with a graphical language for modeling system failure modes through the selection of various fault-tree gates, including sequence-dependency gates, or by a Markov chain. By using this graphical input language, a fault tree becomes a convenient notation for describing a system. In accounting for any sequence dependencies, HARP converts the fault-tree notation to a complex stochastic process that is reduced to a Markov chain, which it can then solve for system reliability. The graphics capability is available for use on an IBM-compatible PC, a Sun, and a VAX workstation. The GO module is written in the C programming language and uses the graphical kernal system (GKS) standard for graphics implementation. The PC, VAX, and Sun versions of the HARP GO module are currently in beta-testing stages.
DeWolf, Melissa; Bassok, Miriam; Holyoak, Keith J
2015-02-01
The standard number system includes several distinct types of notations, which differ conceptually and afford different procedures. Among notations for rational numbers, the bipartite format of fractions (a/b) enables them to represent 2-dimensional relations between sets of discrete (i.e., countable) elements (e.g., red marbles/all marbles). In contrast, the format of decimals is inherently 1-dimensional, expressing a continuous-valued magnitude (i.e., proportion) but not a 2-dimensional relation between sets of countable elements. Experiment 1 showed that college students indeed view these 2-number notations as conceptually distinct. In a task that did not involve mathematical calculations, participants showed a strong preference to represent partitioned displays of discrete objects with fractions and partitioned displays of continuous masses with decimals. Experiment 2 provided evidence that people are better able to identify and evaluate ratio relationships using fractions than decimals, especially for discrete (or discretized) quantities. Experiments 3 and 4 found a similar pattern of performance for a more complex analogical reasoning task. When solving relational reasoning problems based on discrete or discretized quantities, fractions yielded greater accuracy than decimals; in contrast, when quantities were continuous, accuracy was lower for both symbolic notations. Whereas previous research has established that decimals are more effective than fractions in supporting magnitude comparisons, the present study reveals that fractions are relatively advantageous in supporting relational reasoning with discrete (or discretized) concepts. These findings provide an explanation for the effectiveness of natural frequency formats in supporting some types of reasoning, and have implications for teaching of rational numbers.
Mathematical formula recognition using graph grammar
NASA Astrophysics Data System (ADS)
Lavirotte, Stephane; Pottier, Loic
1998-04-01
This paper describes current results of Ofr, a system for extracting and understanding mathematical expressions in documents. Such a tool could be really useful to be able to re-use knowledge in scientific books which are not available in electronic form. We currently also study use of this system for direct input of formulas with a graphical tablet for computer algebra system softwares. Existing solutions for mathematical recognition have problems to analyze 2D expressions like vectors and matrices. This is because they often try to use extended classical grammar to analyze formulas, relatively to baseline. But a lot of mathematical notations do not respect rules for such a parsing and that is the reason why they fail to extend text parsing technic. We investigate graph grammar and graph rewriting as a solution to recognize 2D mathematical notations. Graph grammar provide a powerful formalism to describe structural manipulations of multi-dimensional data. The main two problems to solve are ambiguities between rules of grammar and construction of graph.
"Interactive Classification Technology"
NASA Technical Reports Server (NTRS)
deBessonet, Cary
1999-01-01
The investigators are upgrading a knowledge representation language called SL (Symbolic Language) and an automated reasoning system called SMS (Symbolic Manipulation System) to enable the technologies to be used in automated reasoning and interactive classification systems. The overall goals of the project are: a) the enhancement of the representation language SL to accommodate multiple perspectives and a wider range of meaning; b) the development of a sufficient set of operators to enable the interpreter of SL to handle representations of basic cognitive acts; and c) the development of a default inference scheme to operate over SL notation as it is encoded. As to particular goals the first-year work plan focused on inferencing and.representation issues, including: 1) the development of higher level cognitive/ classification functions and conceptual models for use in inferencing and decision making; 2) the specification of a more detailed scheme of defaults and the enrichment of SL notation to accommodate the scheme; and 3) the adoption of additional perspectives for inferencing.
Yong, Chin W
2016-08-22
DL_F Notation is an easy-to-understand, standardized atom typesetting expression for molecular simulations for a range of organic force field (FF) schemes such as OPLSAA, PCFF, and CVFF. It is implemented within DL_FIELD, a software program that facilitates the setting up of molecular FF models for DL_POLY molecular dynamics simulation software. By making use of the Notation, a single core conversion module (the DL_F conversion Engine) implemented within DL_FIELD can be used to analyze a molecular structure and determine the types of atoms for a given FF scheme. Users only need to provide the molecular input structure in a simple xyz format and DL_FIELD can produce the necessary force field file for DL_POLY automatically. In commensurate with the development concept of DL_FIELD, which placed emphasis on robustness and user friendliness, the Engine provides a single-step solution to setup complex FF models. This allows users to switch from one of the above-mentioned FF seamlessly to another while at the same time provides a consistent atom typing that is expressed in a natural chemical sense.
Yagahara, Ayako; Tsuji, Shintaro; Hukuda, Akihisa; Nishimoto, Naoki; Ogasawara, Katsuhiko
2016-03-01
The purpose of this study is to investigate the differences in the notation of technical terms and their meanings among three terminologies in Japanese radiology-related societies. The three terminologies compared in this study were "radiological technology terminology" and its supplement published by the Japan Society of Radiological Technology, "medical physics terminology" published by the Japan Society of Medical Physics, and "electric radiation terminology" published by the Japan Radiological Society. Terms were entered into spreadsheets and classified into the following three categories: Japanese notation, English notation, and meanings. In the English notation, terms were matched to character strings in the three terminologies and were extracted and compared. The Japanese notations were compared among three terminologies, and the difference between the meanings of the two terminologies radiological technology terminology and electric radiation terminology were compared. There were a total of 14,982 terms in the three terminologies. In English character strings, 2,735 terms were matched to more than two terminologies, with 801 of these terms matched to all the three terminologies. Of those terms in English character strings matched to three terminologies, 752 matched to Japanese character strings. Of the terms in English character strings matched to two terminologies, 1,240 matched to Japanese character strings. With regard to the meanings category, eight terms had mismatched meanings between the two terminologies. For these terms, there were common concepts between two different meaning terms, and it was considered that the derived concepts were described based on domain.
The Emerging Importance of Business Process Standards in the Federal Government
2006-02-23
delivers enough value for its commercialization into the general industry. Today, we are seeing standards such as SOA, BPMN and BPEL hit that...Process Modeling Notation ( BPMN ) and the Business Process Execution Language (BPEL). BPMN provides a standard representation for capturing and...execution. The combination of BPMN and BPEL offers organizations the potential to standardize processes in a distributed environment, enabling
Modelling operations and security of cloud systems using Z-notation and Chinese Wall security policy
NASA Astrophysics Data System (ADS)
Basu, Srijita; Sengupta, Anirban; Mazumdar, Chandan
2016-11-01
Enterprises are increasingly using cloud computing for hosting their applications. Availability of fast Internet and cheap bandwidth are causing greater number of people to use cloud-based services. This has the advantage of lower cost and minimum maintenance. However, ensuring security of user data and proper management of cloud infrastructure remain major areas of concern. Existing techniques are either too complex, or fail to properly represent the actual cloud scenario. This article presents a formal cloud model using the constructs of Z-notation. Principles of the Chinese Wall security policy have been applied to design secure cloud-specific operations. The proposed methodology will enable users to safely host their services, as well as process sensitive data, on cloud.
Vinogradov makes notation on pad in the SM during Expedition 13
2006-04-19
ISS013-E-08185 (19 April 2006) --- Cosmonaut Pavel V. Vinogradov, Expedition 13 commander representing Russia's Federal Space Agency, takes notes while using a communication system in the Zvezda Service Module of the International Space Station.
1994-01-01
torque general nature. We then provide in section 3 a precise at a particular joint of a robot arm , and x the set of an- statement of a specific...sampling Y according to first need to introduce some terminology and to define P(ylx). In the robot arm example described above, it a number of...mathematical objects. A summary of the would mean that one could move the robot arm into most common notations and definitions used in this pa- ’Note that
Pitch Systems and Curwen Hand Signs: A Review of Literature
ERIC Educational Resources Information Center
Frey-Clark, Marta
2017-01-01
Learning to sing from notation is a complex task, and accurately performing pitches without an external reference can be particularly challenging. As such, the use of mnemonic devices to reinforce tonal relationships is a long-standing practice among musicians. Chief among these mnemonic devices are pitch syllable systems and Curwen hand signs.…
Analysis of musical expression in audio signals
NASA Astrophysics Data System (ADS)
Dixon, Simon
2003-01-01
In western art music, composers communicate their work to performers via a standard notation which specificies the musical pitches and relative timings of notes. This notation may also include some higher level information such as variations in the dynamics, tempo and timing. Famous performers are characterised by their expressive interpretation, the ability to convey structural and emotive information within the given framework. The majority of work on audio content analysis focusses on retrieving score-level information; this paper reports on the extraction of parameters describing the performance, a task which requires a much higher degree of accuracy. Two systems are presented: BeatRoot, an off-line beat tracking system which finds the times of musical beats and tracks changes in tempo throughout a performance, and the Performance Worm, a system which provides a real-time visualisation of the two most important expressive dimensions, tempo and dynamics. Both of these systems are being used to process data for a large-scale study of musical expression in classical and romantic piano performance, which uses artificial intelligence (machine learning) techniques to discover fundamental patterns or principles governing expressive performance.
Systems Biology Graphical Notation: Entity Relationship language Level 1 Version 2.
Sorokin, Anatoly; Le Novère, Nicolas; Luna, Augustin; Czauderna, Tobias; Demir, Emek; Haw, Robin; Mi, Huaiyu; Moodie, Stuart; Schreiber, Falk; Villéger, Alice
2015-09-04
The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Entity Relationship language (ER) represents biological entities and their interactions and relationships within a network. SBGN ER focuses on all potential relationships between entities without considering temporal aspects. The nodes (elements) describe biological entities, such as proteins and complexes. The edges (connections) provide descriptions of interactions and relationships (or influences), e.g., complex formation, stimulation and inhibition. Among all three languages of SBGN, ER is the closest to protein interaction networks in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.
Twenty-five years of sport performance research in the Journal of Sports Sciences.
Nevill, Alan; Atkinson, Greg; Hughes, Mike
2008-02-15
In this historical review covering the past 25 years, we reflect on the content of manuscripts relevant to the Sport Performance section of the Journal of Sports Sciences. Due to the wide diversity of sport performance research, the remit of the Sport Performance section has been broad and includes mathematical and statistical evaluation of competitive sports performances, match- and notation-analysis, talent identification, training and selection or team organization. In addition, due to the academic interests of its section editors, they adopted a quality-assurance role for the Sport Performance section, invariably communicated through key editorials that subsequently shaped the editorial policy of the Journal. Key high-impact manuscripts are discussed, providing readers with some insight into what might lead an article to become a citation "classic". Finally, landmark articles in the areas of "science and football" and "notation analysis" are highlighted, providing further insight into how such articles have contributed to the development of sport performance research in general and the Journal of Sports Sciences in particular.
Safety Case Notations: Alternatives for the Non-Graphically Inclined?
NASA Technical Reports Server (NTRS)
Holloway, C. M.
2008-01-01
This working paper presents preliminary ideas of five possible text-based notations for representing safety cases, which may be easier for non-graphically inclined people to use and understand than the currently popular graphics-based representations.
The role of line junctions in object recognition: The case of reading musical notation.
Wong, Yetta Kwailing; Wong, Alan C-N
2018-04-30
Previous work has shown that line junctions are informative features for visual perception of objects, letters, and words. However, the sources of such sensitivity and their generalizability to other object categories are largely unclear. We addressed these questions by studying perceptual expertise in reading musical notation, a domain in which individuals with different levels of expertise are readily available. We observed that removing line junctions created by the contact between musical notes and staff lines selectively impaired recognition performance in experts and intermediate readers, but not in novices. The degree of performance impairment was predicted by individual fluency in reading musical notation. Our findings suggest that line junctions provide diagnostic information about object identity across various categories, including musical notation. However, human sensitivity to line junctions does not readily transfer from familiar to unfamiliar object categories, and has to be acquired through perceptual experience with the specific objects.
A comparison of BPMN 2.0 with other notations for manufacturing processes
NASA Astrophysics Data System (ADS)
García-Domínguez, A.; Marcos, Mariano; Medina, I.
2012-04-01
In order to study their current practices and improve on them, manufacturing firms need to view their processes from several viewpoints at various abstraction levels. Several notations have been developed for this purpose, such as Value Stream Mappings or IDEF models. More recently, the BPMN 2.0 standard from the Object Management Group has been proposed for modeling business processes. A process organizes several activities (manual or automatic) into a single higher-level entity, which can be reused elsewhere in the organization. Its potential for standardizing business interactions is well-known, but there is little work on using BPMN 2.0 to model manufacturing processes. In this work some of the previous notations are outlined and BPMN 2.0 is positioned among them after discussing it in more depth. Some guidelines on using BPMN 2.0 for manufacturing are offered, and its advantages and disadvantages in comparison with the other notations are presented.
How Do Students Misunderstand Number Representations?
ERIC Educational Resources Information Center
Herman, Geoffrey L.; Zilles, Craig; Loui, Michael C.
2011-01-01
We used both student interviews and diagnostic testing to reveal students' misconceptions about number representations in computing systems. This article reveals that students who have passed an undergraduate level computer organization course still possess surprising misconceptions about positional notations, two's complement representation, and…
A Theatre Movement Bibliography, 1978 Edition.
ERIC Educational Resources Information Center
Norris, Lynne
Reference materials that deal with various aspects of theater movement are grouped in this partially annotated bibliography under the following headings: anatomy, kinesiology, and physiology; combat and martial arts; integrated approaches to movement; mime; miscellaneous acting and movement approaches; movement notations systems; movement…
ERIC Educational Resources Information Center
Tesler, Lawrence G.
1984-01-01
Discusses the nature of programing languages, considering the features of BASIC, LOGO, PASCAL, COBOL, FORTH, APL, and LISP. Also discusses machine/assembly codes, the operation of a compiler, and trends in the evolution of programing languages (including interest in notational systems called object-oriented languages). (JN)
NASA Technical Reports Server (NTRS)
Schmidt, R. F.
1984-01-01
An analytical/numerical approach to identifying and correcting the aberrations introduced by a general displacement of the feed from the focal point of a single offset paraboloid antenna used in deployable radiometer systems is developed. A 15 meter reflector with 18 meter focal length is assumed for the analysis, which considers far field radiation pattern quality, focal region fields, and aberrations appearing in the aperture plane. The latter are obtained by ray tracing in the transmit mode and are expressed in terms of optical notation. Attention is given to the physical restraints imposed on corrective elements by real microwave systems and to the intermediate near field aspects of the problem in three dimensions. The subject of wave fronts and caustics in the receive mode is introduced for comparative purposes. Several specific examples are given for aberration reduction at eight beamwidths of scan at a frequency of 1.414 GHz.
Implementation of Kane's Method for a Spacecraft Composed of Multiple Rigid Bodies
NASA Technical Reports Server (NTRS)
Stoneking, Eric T.
2013-01-01
Equations of motion are derived for a general spacecraft composed of rigid bodies connected via rotary (spherical or gimballed) joints in a tree topology. Several supporting concepts are developed in depth. Basis dyads aid in the transition from basis-free vector equations to component-wise equations. Joint partials allow abstraction of 1-DOF, 2-DOF, 3-DOF gimballed and spherical rotational joints to a common notation. The basic building block consisting of an "inner" body and an "outer" body connected by a joint enables efficient organization of arbitrary tree structures. Kane's equation is recast in a form which facilitates systematic assembly of large systems of equations, and exposes a relationship of Kane's equation to Newton and Euler's equations which is obscured by the usual presentation. The resulting system of dynamic equations is of minimum dimension, and is suitable for numerical solution by computer. Implementation is ·discussed, and illustrative simulation results are presented.
Hand-waving and interpretive dance: an introductory course on tensor networks
NASA Astrophysics Data System (ADS)
Bridgeman, Jacob C.; Chubb, Christopher T.
2017-06-01
The curse of dimensionality associated with the Hilbert space of spin systems provides a significant obstruction to the study of condensed matter systems. Tensor networks have proven an important tool in attempting to overcome this difficulty in both the numerical and analytic regimes. These notes form the basis for a seven lecture course, introducing the basics of a range of common tensor networks and algorithms. In particular, we cover: introductory tensor network notation, applications to quantum information, basic properties of matrix product states, a classification of quantum phases using tensor networks, algorithms for finding matrix product states, basic properties of projected entangled pair states, and multiscale entanglement renormalisation ansatz states. The lectures are intended to be generally accessible, although the relevance of many of the examples may be lost on students without a background in many-body physics/quantum information. For each lecture, several problems are given, with worked solutions in an ancillary file.
Non-Gaussian and Multivariate Noise Models for Signal Detection.
1982-09-01
follow, some of the basic results of asymptotic "theory are presented. both to make the notation clear. and to give some i ~ background for the...densities are considered within a detection framework. The discussions include specific examples and also some general methods of density generation ...densities generated by a memoryless, nonlinear transformation of a correlated, Gaussian source is discussed in some detail. A member of this class has the
40 CFR 60.431 - Definitions and notations.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...
40 CFR 60.431 - Definitions and notations.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...
40 CFR 60.431 - Definitions and notations.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...
40 CFR 60.431 - Definitions and notations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...
40 CFR 60.431 - Definitions and notations.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Definitions and notations. 60.431 Section 60.431 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS..., package inserts, book jackets, market circulars, magazine inserts, and shopping news, Newspapers, magazine...
Assurance Arguments for the Non-Graphically-Inclined: Two Approaches
NASA Technical Reports Server (NTRS)
Heavner, Emily; Holloway, C. Michael
2017-01-01
We introduce and discuss two approaches to presenting assurance arguments. One approach is based on a monograph structure, while the other is based on a tabular structure. In today's research and academic setting, assurance cases often use a graphical notation; however for people who are not graphically inclined, these notations can be difficult to read. This document proposes, outlines, explains, and presents examples of two non-graphical assurance argument notations that may be appropriate for non-graphically-inclined readers and also provide argument writers with freedom to add details and manipulate an argument in multiple ways.
Löwenkamp, Christian; Eloka, Owino; Schiller, Florian; Kao, Chung-Shan; Wu, Chaohua; Gao, Xiaorong; Franz, Volker H.
2016-01-01
The SNARC effect refers to an association of numbers and spatial properties of responses that is commonly thought to be amodal and independent of stimulus notation. We tested for a horizontal SNARC effect using Arabic digits, simple-form Chinese characters and Chinese hand signs in participants from Mainland China. We found a horizontal SNARC effect in all notations. This is the first time that a horizontal SNARC effect has been demonstrated in Chinese characters and Chinese hand signs. We tested for the SNARC effect in two experiments (parity judgement and magnitude judgement). The parity judgement task yielded clear, consistent SNARC effects in all notations, whereas results were more mixed in magnitude judgement. Both Chinese characters and Chinese hand signs are represented non-symbolically for low numbers and symbolically for higher numbers, allowing us to contrast within the same notation the effects of heavily learned non-symbolic vs. symbolic representation on the processing of numbers. In addition to finding a horizontal SNARC effect, we also found a robust numerical distance effect in all notations. This is particularly interesting as it persisted when participants reported using purely visual features to solve the task, thereby suggesting that numbers were processed semantically even when the task could be solved without the semantic information. PMID:27684956
The Misuse of the Circle Notation to Represent Aromatic Rings.
ERIC Educational Resources Information Center
Belloli, Robert C.
1983-01-01
Discusses the confusion and erroneous conclusions that can result from the overuse and misuse of the circle notation to represent aromaticity in polycylic aromatic hydrocarbons. Includes nature of the problem, textbook treatment, and a possible compromise method of representation. (Author/JN)
Integrated resource scheduling in a distributed scheduling environment
NASA Technical Reports Server (NTRS)
Zoch, David; Hall, Gardiner
1988-01-01
The Space Station era presents a highly-complex multi-mission planning and scheduling environment exercised over a highly distributed system. In order to automate the scheduling process, customers require a mechanism for communicating their scheduling requirements to NASA. A request language that a remotely-located customer can use to specify his scheduling requirements to a NASA scheduler, thus automating the customer-scheduler interface, is described. This notation, Flexible Envelope-Request Notation (FERN), allows the user to completely specify his scheduling requirements such as resource usage, temporal constraints, and scheduling preferences and options. The FERN also contains mechanisms for representing schedule and resource availability information, which are used in the inter-scheduler inconsistency resolution process. Additionally, a scheduler is described that can accept these requests, process them, generate schedules, and return schedule and resource availability information to the requester. The Request-Oriented Scheduling Engine (ROSE) was designed to function either as an independent scheduler or as a scheduling element in a network of schedulers. When used in a network of schedulers, each ROSE communicates schedule and resource usage information to other schedulers via the FERN notation, enabling inconsistencies to be resolved between schedulers. Individual ROSE schedules are created by viewing the problem as a constraint satisfaction problem with a heuristically guided search strategy.
MaROS Strategic Relay Planning and Coordination Interfaces
NASA Technical Reports Server (NTRS)
Allard, Daniel A.
2010-01-01
The Mars Relay Operations Service (MaROS) is designed to provide planning and analysis tools in support of ongoing Mars Network relay operations. Strategic relay planning requires coordination between lander and orbiter mission ground data system (GDS) teams to schedule and execute relay communications passes. MaROS centralizes this process, correlating all data relevant to relay coordination to provide a cohesive picture of the relay state. Service users interact with the system through thin-layer command line and web user interface client applications. Users provide and utilize data such as lander view periods of orbiters, Deep Space Network (DSN) antenna tracks, and reports of relay pass performance. Users upload and download relevant relay data via formally defined and documented file structures including some described in Extensible Markup Language (XML). Clients interface with the system via an http-based Representational State Transfer (ReST) pattern using Javascript Object Notation (JSON) formats. This paper will provide a general overview of the service architecture and detail the software interfaces and considerations for interface design.
Transfer function of analog fiber-optic systems driven by Fabry-Perot lasers: comment
NASA Astrophysics Data System (ADS)
Gyula, Veszely
2006-10-01
A bad notation makes difficult the understanding of the paper of Capmany et al. [J. Opt. Soc. Am. B22, 2099 (2005)]. The reason is that the real time function and the complex time function run into one another.
19 CFR 141.90 - Notation of tariff classification and value on invoice.
Code of Federal Regulations, 2013 CFR
2013-04-01
.... (d) Importer's notations in blue or black ink. Except when invoice line data are linked to an entry... the invoice by the importer or customs broker must be in blue or black ink. [T.D. 73-175, 38 FR 17447...
19 CFR 141.90 - Notation of tariff classification and value on invoice.
Code of Federal Regulations, 2012 CFR
2012-04-01
.... (d) Importer's notations in blue or black ink. Except when invoice line data are linked to an entry... the invoice by the importer or customs broker must be in blue or black ink. [T.D. 73-175, 38 FR 17447...
19 CFR 141.90 - Notation of tariff classification and value on invoice.
Code of Federal Regulations, 2011 CFR
2011-04-01
.... (d) Importer's notations in blue or black ink. Except when invoice line data are linked to an entry... the invoice by the importer or customs broker must be in blue or black ink. [T.D. 73-175, 38 FR 17447...
19 CFR 141.90 - Notation of tariff classification and value on invoice.
Code of Federal Regulations, 2014 CFR
2014-04-01
.... (d) Importer's notations in blue or black ink. Except when invoice line data are linked to an entry... the invoice by the importer or customs broker must be in blue or black ink. [T.D. 73-175, 38 FR 17447...
7 CFR 27.69 - Classification review; notations on certificate.
Code of Federal Regulations, 2011 CFR
2011-01-01
... review of classification is made after the issuance of a cotton class certificate, the results of the... 7 Agriculture 2 2011-01-01 2011-01-01 false Classification review; notations on certificate. 27.69... CONTAINER REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Classification...
Solving Constraint-Satisfaction Problems In Prolog Language
NASA Technical Reports Server (NTRS)
Nachtsheim, Philip R.
1991-01-01
Technique for solution of constraint-satisfaction problems uses definite-clause grammars of Prolog computer language. Exploits fact that grammar-rule notation viewed as "state-change notation". Facilitates development of dynamic representation performing informed as well as blind searches. Applicable to design, scheduling, and planning problems.
Using Games To Teach Chemistry: An Annotated Bibliography
NASA Astrophysics Data System (ADS)
Russell, Jeanne V.
1999-04-01
A list of published or marketed games based on a chemistry motif is presented. Each game is listed according to its level, subject matter, and title. A bibliographic notation and a short description are given for each game. For Introductory/High School/General Chemistry, 45 games are listed under the subjects General Knowledge; Elements & Atomic Structure (not Symbols); Nomenclature, Formulas, & Equation Writing; Chemical Reactions: Solutions & Solubilities; and Other Subjects. Seventeen games are listed under Organic Chemistry and 4 games under Other Chemistry Games. Computer games designed for outdated computers (PDP-11, TRS-80, and Apple II) are not included.
Notation for human immunogobulin subclasses.
Kunkel, H G; Fahey, J L; Franklin, E C; Osserman, E F; Terry, W D
1966-01-01
After consultation between immunologists from a number of countries a nomenclature for human immunoglobulins was proposed in 1964 and was published in the Bulletin of the World Health Organization.(1) However, that proposed scheme of notation, which has already gained wide acceptance, left several specialized areas of nomenclature still to be resolved; one of these was the subclasses of immunoglobulins. Some of the research workers most closely concerned with the problem have now agreed upon a unified scheme for the notation of the human immunoglobulin subclasses, and, in particular, of the immunoglobulin G subclass, for which two different nomenclatorial schemes have been followed in recent years. Their proposals are given below.
RAFCON: A Graphical Tool for Engineering Complex, Robotic Tasks
2016-10-09
Robotic tasks are becoming increasingly complex, and with this also the robotic systems. This requires new tools to manage this complexity and to...execution of robotic tasks, called RAFCON. These tasks are described in hierarchical state machines supporting concurrency. A formal notation of this concept
RT-25: Requirements Management for Net-Centric Enterprises. Phase 1
2011-04-28
software systems. These include Business Process Modeling Notation ( BPMN ) (White and Miers 2008) and Business Process Execution Language (BPEL) (Sarang...Engineering with SysML/UML: Modeling, Analysis, Design, Morgan Kaufmann/The OMG Press. White, S. A. and D. Miers (2008). BPMN Modeling and Reference
ERIC Educational Resources Information Center
Stenton, Anthony
2013-01-01
The CNRS-financed authoring system SWANS (Synchronised Web Authoring Notation System), now used in several CercleS centres, was developed by teams from four laboratories as a personalised learning tool for the purpose of making available knowledge about lexical stress patterns and mother-tongue interference in L2 speech production--helping…
2008-09-01
SEP) is a comprehensive , iterative and recursive problem solving process, applied sequentially top-down by integrated teams. It transforms needs...central integrated design repository. It includes a comprehensive behavior modeling notation to understand the dynamics of a design. CORE is a MBSE...37 F. DYNAMIC POSITIONING..........................................................................38 G. FIREFIGHTING
Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.
Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice
2015-09-04
The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.
Inequalities, assessment and computer algebra
NASA Astrophysics Data System (ADS)
Sangwin, Christopher J.
2015-01-01
The goal of this paper is to examine single variable real inequalities that arise as tutorial problems and to examine the extent to which current computer algebra systems (CAS) can (1) automatically solve such problems and (2) determine whether students' own answers to such problems are correct. We review how inequalities arise in contemporary curricula. We consider the formal mathematical processes by which such inequalities are solved, and we consider the notation and syntax through which solutions are expressed. We review the extent to which current CAS can accurately solve these inequalities, and the form given to the solutions by the designers of this software. Finally, we discuss the functionality needed to deal with students' answers, i.e. to establish equivalence (or otherwise) of expressions representing unions of intervals. We find that while contemporary CAS accurately solve inequalities there is a wide variety of notation used.
An on-line system for hand-printed input
NASA Technical Reports Server (NTRS)
Williams, T. G.; Bebb, J.
1971-01-01
The capability of graphic input/output systems is described. Topics considered are a character recognizer and dictionary building program, an initial flow chart element input program, and a system entitled The Assistant Mathematician, which uses ordinary mathematics to specify numeric computation. All three parts are necessary to allow a user to carry on a mathematical dialogue with the computer in the language and notation of his discipline or problem domain.
Cognitive Load Theory and Music Instruction
ERIC Educational Resources Information Center
Owens, Paul; Sweller, John
2008-01-01
In two experiments, the principles of cognitive load theory were applied to the design of alternatives to conventional music instruction hypothesised to facilitate learning. Experiment 1 demonstrated that spatial integration of visual text and musical notation, and dual-modal delivery of auditory text and musical notation, were superior to the…
Orderedness and Stratificational "and" Nodes.
ERIC Educational Resources Information Center
Herrick, Earl M.
It is possible to apply Lamb's stratificational theory and analysis to English graphonomy, but additional notation devices must be used to explain particular graphemes and their characteristics. The author presents cases where Lamb's notation is inadequate. In those cases, he devises new means for performing the analysis. The result of this…
Evaluation of the U.S. Army’s Aids Education Program
1992-03-25
34 scaiac (contlinad) Initial Factor Notd : N. Preatation flatbed : Varimax Notation NedjiM Prai Factor Pattern Notated Factor Pattern Factor StrUCture...material, the graphics contained in this appendix may be reproduced in the form of slides, or enlarged, laminated and bound together for use as a flip
Using Baroque Techniques to Teach Improvisation in Your Classroom
ERIC Educational Resources Information Center
Yoo, Hyesoo
2015-01-01
Before our current notation system was widely adopted by musicians, improvisation was a key component of music throughout the Western world. One of the fundamental elements of the baroque style, namely, using improvised embellishment, offered musicians great artist liberty. During the baroque period, improvisation spread across Europe and beyond.…
Music Learning: Greater than the Sum of Its Parts.
ERIC Educational Resources Information Center
Zentz, Donald M.
1992-01-01
Discusses that Gestalt principles are especially well suited to teaching music. Identifies the laws of proximity, similarity, common direction, and simplicity in the notation system. Suggests that music teachers use these principles by following a logical progression to teach students to improve musical skills, solve problems, and think in…
Will We Soon Have a Geostationary Microwave Sounder and What Can We Do with It?
NASA Technical Reports Server (NTRS)
Lambrigtsen, Bjorn
2008-01-01
This slide presentation reviews the Geostationary Microwave Sounder (GEO/MW). GEO/MW applications include weather forecasting, hurricane diagnostics, rain, tropospheric wind profiling, and climate research. The presentation also includes information on prototype development, system tests, the notational PATH mission, and data products.
John Curwen: Teaching the Tonic Sol-Fa Method 1816-1880.
ERIC Educational Resources Information Center
Zinar, Ruth
1983-01-01
John Curwen made many contributions to music education. He taught singing through the sound of tones before students learned notation, originated a widely used system of hand signals for the tones of the scale, and emphasized a feeling for the basic beat underlying the durations of tones. (CS)
Problem Solving Under Time-Constraints.
ERIC Educational Resources Information Center
Richardson, Michael; Hunt, Earl
A model of how automated and controlled processing can be mixed in computer simulations of problem solving is proposed. It is based on previous work by Hunt and Lansman (1983), who developed a model of problem solving that could reproduce the data obtained with several attention and performance paradigms, extending production-system notation to…
1996-09-01
Generalized Likelihood Ratio (GLR) and voting techniques. The third class consisted of multiple hypothesis filter detectors, specifically the MMAE. The...vector version, versus a tensor if we use the matrix version of the power spectral density estimate. Using this notation, we will derive an...as MATLAB , have an intrinsic sample covariance computation available, which makes this method quite easy to implement. In practice, the mean for the
Trees, B-series and G-symplectic methods
NASA Astrophysics Data System (ADS)
Butcher, J. C.
2017-07-01
The order conditions for Runge-Kutta methods are intimately connected with the graphs known as rooted trees. The conditions can be expressed in terms of Taylor expansions written as weighted sums of elementary differentials, that is as B-series. Polish notation provides a unifying structure for representing many of the quantities appearing in this theory. Applications include the analysis of general linear methods with special reference to G-symplectic methods. A new order 6 method has recently been constructed.
A review and critique of some models used in competing risk analysis.
Gail, M
1975-03-01
We have introduced a notation which allows one to define competing risk models easily and to examine underlying assumptions. We have treated the actuarial model for competing risk in detail, comparing it with other models and giving useful variance formulae both for the case when times of death are available and for the case when they are not. The generality of these methods is illustrated by an example treating two dependent competing risks.
VEST: Abstract Vector Calculus Simplification in Mathematica
DOE Office of Scientific and Technical Information (OSTI.GOV)
J. Squire, J. Burby and H. Qin
2013-03-12
We present a new package, VEST (Vector Einstein Summation Tools), that performs abstract vector calculus computations in Mathematica. Through the use of index notation, VEST is able to reduce scalar and vector expressions of a very general type using a systematic canonicalization procedure. In addition, utilizing properties of the Levi-Civita symbol, the program can derive types of multi-term vector identities that are not recognized by canonicalization, subsequently applying these to simplify large expressions. In a companion paper [1], we employ VEST in the automation of the calculation of Lagrangians for the single particle guiding center system in plasma physics, amore » computation which illustrates its ability to handle very large expressions. VEST has been designed to be simple and intuitive to use, both for basic checking of work and more involved computations. __________________________________________________« less
VEST: Abstract vector calculus simplification in Mathematica
NASA Astrophysics Data System (ADS)
Squire, J.; Burby, J.; Qin, H.
2014-01-01
We present a new package, VEST (Vector Einstein Summation Tools), that performs abstract vector calculus computations in Mathematica. Through the use of index notation, VEST is able to reduce three-dimensional scalar and vector expressions of a very general type to a well defined standard form. In addition, utilizing properties of the Levi-Civita symbol, the program can derive types of multi-term vector identities that are not recognized by reduction, subsequently applying these to simplify large expressions. In a companion paper Burby et al. (2013) [12], we employ VEST in the automation of the calculation of high-order Lagrangians for the single particle guiding center system in plasma physics, a computation which illustrates its ability to handle very large expressions. VEST has been designed to be simple and intuitive to use, both for basic checking of work and more involved computations.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-22
... used for substances identified as causing or contributing to allergic contact dermatitis (ACD) or other..., 4676 Columbia Parkway, Cincinnati, Ohio 45226. FOR FURTHER INFORMATION CONTACT: Naomi Hudson, NIOSH... professionals, employers, and other interested parties in protecting workers from chemical contact with the skin...
Effects of Music Notation Reinforcement on Aural Memory for Melodies
ERIC Educational Resources Information Center
Buonviri, Nathan
2015-01-01
The purpose of this study was to investigate effects of music notation reinforcement on aural memory for melodies. Participants were 41 undergraduate and graduate music majors in a within-subjects design. Experimental trials tested melodic memory through a sequence of target melodies, distraction melodies, and matched and unmatched answer choices.…
Symbolic Notations and Students' Achievements in Algebra
ERIC Educational Resources Information Center
Peter, Ebiendele E.; Olaoye, Adetunji A.
2013-01-01
This study focuses on symbolic notations and its impact on students' achievement in Algebra. The main reason for this study rests on the observation from personal and professional experiences on students' increasing hatred for Algebra. One hundred and fifty (150) Senior Secondary School Students (SSS) from Ojo Local Education District, Ojo, Lagos,…
Avoiding Communication in Dense Linear Algebra
2013-08-16
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.1 Asymptotic Notation . . . . . . . . . . . . . . . . . . . . . . . . . . . 6...and parallelizing Strassen’s matrix multiplication algorithm (Chapter 11). 6 Chapter 2 Preliminaries 2.1 Notation and Definitions In this section we...between computations and algo- rithms). The following definition is based on [56]: Definition 2.1. A classical algorithm in linear algebra is one that
Articulated Multimedia Physics, Lesson 3, The Arithmetic of Scientific Notation.
ERIC Educational Resources Information Center
New York Inst. of Tech., Old Westbury.
As the third lesson of the Articulated Multimedia Physics Course, instructional materials are presented in this study guide. An introductory description is given for scientific notation methods. The subject content is provided in scrambled form, and the use of matrix transparencies is required for students to control their learning process.…
Ichi, Ni, 3, 4: Neural Representation of Kana, Kanji, and Arabic Numbers in Native Japanese Speakers
ERIC Educational Resources Information Center
Coderre, Emily L.; Filippi, Christopher G.; Newhouse, Paul A.; Dumas, Julie A.
2009-01-01
The Japanese language represents numbers in kana digit words (a syllabic notation), kanji numbers and Arabic numbers (logographic notations). Kanji and Arabic numbers have previously shown similar patterns of numerical processing, and because of their shared logographic properties may exhibit similar brain areas of numerical representation. Kana…
New Bouncing Curved Arrow Technique for the Depiction of Organic Mechanisms
ERIC Educational Resources Information Center
Straumanis, Andrei R.; Ruder, Suzanne M.
2009-01-01
Many students fail to develop a conceptual understanding of organic chemistry. Evidence suggests this failure goes hand-in-hand with a failure to grasp the techniques, meaning, and usefulness of curved arrow notation. Use of curved arrow notation to illustrate electrophilic addition appears to be a critical juncture in student understanding.…
ERIC Educational Resources Information Center
Williams, Donald F.; Glasser, David
1991-01-01
Introduces and develops mathematical notation to assist undergraduate students in overcoming conceptual difficulties involving the underlying mathematics of state functions, which tend to be different from functions encountered by students in previous mathematical courses, because of the need to manipulate special types of partial derivatives and…
Semantic Processing in the Production of Numerals across Notations
ERIC Educational Resources Information Center
Herrera, Amparo; Macizo, Pedro
2012-01-01
In the present work, we conducted a series of experiments to explore the processing stages required to name numerals presented in different notations. To this end, we used the semantic blocking paradigm previously used in psycholinguist studies. We found a facilitative effect of the semantic blocked context relative to the mixed context for Arabic…
Perceptions of Schooling, Pedagogy and Notation in the Lives of Visually-Impaired Musicians
ERIC Educational Resources Information Center
Baker, David; Green, Lucy
2016-01-01
This article discusses findings on schooling, pedagogy and notation in the life-experiences of amateur and professional visually-impaired musicians/music teachers, and the professional experiences of sighted music teachers who work with visually-impaired learners. The study formed part of a broader UK Arts and Humanities Research Council funded…
43 CFR 3815.8 - Notation required in application for patent; conditions required in patent.
Code of Federal Regulations, 2012 CFR
2012-10-01
... patent; conditions required in patent. 3815.8 Section 3815.8 Public Lands: Interior Regulations Relating... Notation required in application for patent; conditions required in patent. (a) Every application for patent for any minerals located subject to this Act must bear on its face, before being executed by the...
43 CFR 3815.8 - Notation required in application for patent; conditions required in patent.
Code of Federal Regulations, 2011 CFR
2011-10-01
... patent; conditions required in patent. 3815.8 Section 3815.8 Public Lands: Interior Regulations Relating... Notation required in application for patent; conditions required in patent. (a) Every application for patent for any minerals located subject to this Act must bear on its face, before being executed by the...
43 CFR 3815.8 - Notation required in application for patent; conditions required in patent.
Code of Federal Regulations, 2014 CFR
2014-10-01
... patent; conditions required in patent. 3815.8 Section 3815.8 Public Lands: Interior Regulations Relating... Notation required in application for patent; conditions required in patent. (a) Every application for patent for any minerals located subject to this Act must bear on its face, before being executed by the...
43 CFR 3815.8 - Notation required in application for patent; conditions required in patent.
Code of Federal Regulations, 2013 CFR
2013-10-01
... patent; conditions required in patent. 3815.8 Section 3815.8 Public Lands: Interior Regulations Relating... Notation required in application for patent; conditions required in patent. (a) Every application for patent for any minerals located subject to this Act must bear on its face, before being executed by the...
Guitar Scales in Music Notation and Tablature Diagrams.
ERIC Educational Resources Information Center
Hammer, Petra
This study guide was designed to help high school students learn the basic skills in classical guitar playing, technique, fingerboard knowledge, and musicianship. The introduction describes how to read the music notation that is presented in traditional music form and also in tablature diagrams showing finger positioning in the guitar neck.…
A virtual data language and system for scientific workflow management in data grid environments
NASA Astrophysics Data System (ADS)
Zhao, Yong
With advances in scientific instrumentation and simulation, scientific data is growing fast in both size and analysis complexity. So-called Data Grids aim to provide high performance, distributed data analysis infrastructure for data- intensive sciences, where scientists distributed worldwide need to extract information from large collections of data, and to share both data products and the resources needed to produce and store them. However, the description, composition, and execution of even logically simple scientific workflows are often complicated by the need to deal with "messy" issues like heterogeneous storage formats and ad-hoc file system structures. We show how these difficulties can be overcome via a typed workflow notation called virtual data language, within which issues of physical representation are cleanly separated from logical typing, and by the implementation of this notation within the context of a powerful virtual data system that supports distributed execution. The resulting language and system are capable of expressing complex workflows in a simple compact form, enacting those workflows in distributed environments, monitoring and recording the execution processes, and tracing the derivation history of data products. We describe the motivation, design, implementation, and evaluation of the virtual data language and system, and the application of the virtual data paradigm in various science disciplines, including astronomy, cognitive neuroscience.
Computational Methods for Control and Estimation of Distributed System
1988-08-01
prey example. [1987, August] Estimation of Nonlinearities in Parabolic Models for Growth, Predation and Dispersal of Populations. S a ON A VARIATIONAL ...NOTATION 17. COSATI CODES 18. SUBJECT TERMS (Continue on reverse if necessary and identify by block number) FIELD GROUP SUB-GROUP 19. ABSTRACT (Continue...techniques for infinite dimensional systems. (v) Control and stabilization of visco-elastic structures. (vi) Approximation in delay and Volterra type
Neubert, Sebastian; Göde, Bernd; Gu, Xiangyu; Stoll, Norbert; Thurow, Kerstin
2017-04-01
Modern business process management (BPM) is increasingly interesting for laboratory automation. End-to-end workflow automation and improved top-level systems integration for information technology (IT) and automation systems are especially prominent objectives. With the ISO Standard Business Process Model and Notation (BPMN) 2.X, a system-independent and interdisciplinary accepted graphical process control notation is provided, allowing process analysis, while also being executable. The transfer of BPM solutions to structured laboratory automation places novel demands, for example, concerning the real-time-critical process and systems integration. The article discusses the potential of laboratory execution systems (LESs) for an easier implementation of the business process management system (BPMS) in hierarchical laboratory automation. In particular, complex application scenarios, including long process chains based on, for example, several distributed automation islands and mobile laboratory robots for a material transport, are difficult to handle in BPMSs. The presented approach deals with the displacement of workflow control tasks into life science specialized LESs, the reduction of numerous different interfaces between BPMSs and subsystems, and the simplification of complex process modelings. Thus, the integration effort for complex laboratory workflows can be significantly reduced for strictly structured automation solutions. An example application, consisting of a mixture of manual and automated subprocesses, is demonstrated by the presented BPMS-LES approach.
MacRae, Jayden; Love, Tom; Baker, Michael G; Dowell, Anthony; Carnachan, Matthew; Stubbe, Maria; McBain, Lynn
2015-10-06
We designed and validated a rule-based expert system to identify influenza like illness (ILI) from routinely recorded general practice clinical narrative to aid a larger retrospective research study into the impact of the 2009 influenza pandemic in New Zealand. Rules were assessed using pattern matching heuristics on routine clinical narrative. The system was trained using data from 623 clinical encounters and validated using a clinical expert as a gold standard against a mutually exclusive set of 901 records. We calculated a 98.2 % specificity and 90.2 % sensitivity across an ILI incidence of 12.4 % measured against clinical expert classification. Peak problem list identification of ILI by clinical coding in any month was 9.2 % of all detected ILI presentations. Our system addressed an unusual problem domain for clinical narrative classification; using notational, unstructured, clinician entered information in a community care setting. It performed well compared with other approaches and domains. It has potential applications in real-time surveillance of disease, and in assisted problem list coding for clinicians. Our system identified ILI presentation with sufficient accuracy for use at a population level in the wider research study. The peak coding of 9.2 % illustrated the need for automated coding of unstructured narrative in our study.
Mincarone, Pierpaolo; Leo, Carlo Giacomo; Trujillo-Martín, Maria Del Mar; Manson, Jan; Guarino, Roberto; Ponzini, Giuseppe; Sabina, Saverio
2018-04-01
The importance of working toward quality improvement in healthcare implies an increasing interest in analysing, understanding and optimizing process logic and sequences of activities embedded in healthcare processes. Their graphical representation promotes faster learning, higher retention and better compliance. The study identifies standardized graphical languages and notations applied to patient care processes and investigates their usefulness in the healthcare setting. Peer-reviewed literature up to 19 May 2016. Information complemented by a questionnaire sent to the authors of selected studies. Systematic review conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. Five authors extracted results of selected studies. Ten articles met the inclusion criteria. One notation and language for healthcare process modelling were identified with an application to patient care processes: Business Process Model and Notation and Unified Modeling Language™. One of the authors of every selected study completed the questionnaire. Users' comprehensibility and facilitation of inter-professional analysis of processes have been recognized, in the filled in questionnaires, as major strengths for process modelling in healthcare. Both the notation and the language could increase the clarity of presentation thanks to their visual properties, the capacity of easily managing macro and micro scenarios, the possibility of clearly and precisely representing the process logic. Both could increase guidelines/pathways applicability by representing complex scenarios through charts and algorithms hence contributing to reduce unjustified practice variations which negatively impact on quality of care and patient safety.
DEVS Unified Process for Web-Centric Development and Testing of System of Systems
2008-05-20
gathering from the user. Further, methodologies have been developed to generate DEVS models from BPMN /BPEL-based and message-based requirement specifications...27] 3. BPMN /BPEL based system specifications: Business Process Modeling Notation ( BPMN ) [bpm] or Business Process Execution Language (BPEL) provide a...information is stored in .wsdl and .bpel files for BPEL but in proprietary format for BPMN . 4. DoDAF-based requirement specifications: Department of
Nonlinear Conservation Laws and Finite Volume Methods
NASA Astrophysics Data System (ADS)
Leveque, Randall J.
Introduction Software Notation Classification of Differential Equations Derivation of Conservation Laws The Euler Equations of Gas Dynamics Dissipative Fluxes Source Terms Radiative Transfer and Isothermal Equations Multi-dimensional Conservation Laws The Shock Tube Problem Mathematical Theory of Hyperbolic Systems Scalar Equations Linear Hyperbolic Systems Nonlinear Systems The Riemann Problem for the Euler Equations Numerical Methods in One Dimension Finite Difference Theory Finite Volume Methods Importance of Conservation Form - Incorrect Shock Speeds Numerical Flux Functions Godunov's Method Approximate Riemann Solvers High-Resolution Methods Other Approaches Boundary Conditions Source Terms and Fractional Steps Unsplit Methods Fractional Step Methods General Formulation of Fractional Step Methods Stiff Source Terms Quasi-stationary Flow and Gravity Multi-dimensional Problems Dimensional Splitting Multi-dimensional Finite Volume Methods Grids and Adaptive Refinement Computational Difficulties Low-Density Flows Discrete Shocks and Viscous Profiles Start-Up Errors Wall Heating Slow-Moving Shocks Grid Orientation Effects Grid-Aligned Shocks Magnetohydrodynamics The MHD Equations One-Dimensional MHD Solving the Riemann Problem Nonstrict Hyperbolicity Stiffness The Divergence of B Riemann Problems in Multi-dimensional MHD Staggered Grids The 8-Wave Riemann Solver Relativistic Hydrodynamics Conservation Laws in Spacetime The Continuity Equation The 4-Momentum of a Particle The Stress-Energy Tensor Finite Volume Methods Multi-dimensional Relativistic Flow Gravitation and General Relativity References
Graphical User Interface for an Observing Control System for the UK Infrared Telescope
NASA Astrophysics Data System (ADS)
Tan, M.; Bridger, A.; Wright, G. S.; Adamson, A. J.; Currie, M. J.; Economou, F.
A Graphical user interface for the observing control system of UK Infrared Telescope has been developed as a part of the ORAC (Observatory Reduction and Acquisition Control) Project. We analyzed and designed the system using the Unified Modelling Language (UML) with the CASE tool Rational Rose 98. The system has been implemented in a modular way with Java packages using Swing and RMI. This system is component-based with pluggability. Object orientation concepts and UML notations have been applied throughout the development.
Kupczewska-Dobecka, Małgorzata; Jakubowski, Marek; Czerczak, Sławomir
2010-09-01
Our objectives included calculating the permeability coefficient and dermal penetration rates (flux value) for 112 chemicals with occupational exposure limits (OELs) according to the LFER (linear free-energy relationship) model developed using published methods. We also attempted to assign skin notations based on each chemical's molecular structure. There are many studies available where formulae for coefficients of permeability from saturated aqueous solutions (K(p)) have been related to physicochemical characteristics of chemicals. The LFER model is based on the solvation equation, which contains five main descriptors predicted from chemical structure: solute excess molar refractivity, dipolarity/polarisability, summation hydrogen bond acidity and basicity, and the McGowan characteristic volume. Descriptor values, available for about 5000 compounds in the Pharma Algorithms Database were used to calculate permeability coefficients. Dermal penetration rate was estimated as a ratio of permeability coefficient and concentration of chemical in saturated aqueous solution. Finally, estimated dermal penetration rates were used to assign the skin notation to chemicals. Defined critical fluxes defined from the literature were recommended as reference values for skin notation. The application of Abraham descriptors predicted from chemical structure and LFER analysis in calculation of permeability coefficients and flux values for chemicals with OELs was successful. Comparison of calculated K(p) values with data obtained earlier from other models showed that LFER predictions were comparable to those obtained by some previously published models, but the differences were much more significant for others. It seems reasonable to conclude that skin should not be characterised as a simple lipophilic barrier alone. Both lipophilic and polar pathways of permeation exist across the stratum corneum. It is feasible to predict skin notation on the basis of the LFER and other published models; from among 112 chemicals 94 (84%) should have the skin notation in the OEL list based on the LFER calculations. The skin notation had been estimated by other published models for almost 94% of the chemicals. Twenty-nine (25.8%) chemicals were identified to have significant absorption and 65 (58%) the potential for dermal toxicity. We found major differences between alternative published analytical models and their ability to determine whether particular chemicals were potentially dermotoxic. Copyright © 2010 Elsevier B.V. All rights reserved.
Experience with abstract notation one
NASA Technical Reports Server (NTRS)
Harvey, James D.; Weaver, Alfred C.
1990-01-01
The development of computer science has produced a vast number of machine architectures, programming languages, and compiler technologies. The cross product of these three characteristics defines the spectrum of previous and present data representation methodologies. With regard to computer networks, the uniqueness of these methodologies presents an obstacle when disparate host environments are to be interconnected. Interoperability within a heterogeneous network relies upon the establishment of data representation commonality. The International Standards Organization (ISO) is currently developing the abstract syntax notation one standard (ASN.1) and the basic encoding rules standard (BER) that collectively address this problem. When used within the presentation layer of the open systems interconnection reference model, these two standards provide the data representation commonality required to facilitate interoperability. The details of a compiler that was built to automate the use of ASN.1 and BER are described. From this experience, insights into both standards are given and potential problems relating to this development effort are discussed.
Tensor methodology and computational geometry in direct computational experiments in fluid mechanics
NASA Astrophysics Data System (ADS)
Degtyarev, Alexander; Khramushin, Vasily; Shichkina, Julia
2017-07-01
The paper considers a generalized functional and algorithmic construction of direct computational experiments in fluid dynamics. Notation of tensor mathematics is naturally embedded in the finite - element operation in the construction of numerical schemes. Large fluid particle, which have a finite size, its own weight, internal displacement and deformation is considered as an elementary computing object. Tensor representation of computational objects becomes strait linear and uniquely approximation of elementary volumes and fluid particles inside them. The proposed approach allows the use of explicit numerical scheme, which is an important condition for increasing the efficiency of the algorithms developed by numerical procedures with natural parallelism. It is shown that advantages of the proposed approach are achieved among them by considering representation of large particles of a continuous medium motion in dual coordinate systems and computing operations in the projections of these two coordinate systems with direct and inverse transformations. So new method for mathematical representation and synthesis of computational experiment based on large particle method is proposed.
ERIC Educational Resources Information Center
Blanton, Maria; Brizuela, Bárbara M.; Gardiner, Angela Murphy; Sawrey, Katie; Newman-Owens, Ashley
2017-01-01
Recent research suggests that children in elementary grades have some facility with variable and variable notation in ways that warrant closer attention. We report here on an empirically developed progression in first-grade children's thinking about these concepts in functional relationships. Using learning trajectories research as a framework for…
Glossing for Improved Comprehension: Progress and Prospect.
ERIC Educational Resources Information Center
Otto, Wayne; Hayes, Bernie
The terms gloss and glossing are being used to designate and describe the systematic use of marginal notes and other extra-text notations to direct readers' attention while they read. Gloss notations may serve as an aid to direct students to content areas of text and to levels of understanding that make optimal use of their current--and sometimes…
ERIC Educational Resources Information Center
Elkoshi, Rivka
2007-01-01
Facing the ambiguous status of in-school music literacy, this follow-up eight-year study aims to touch on the effects of traditional staff notation (SN) learning on student's intuitive symbolizing behavior and musical perception. Subjects were 47 second-graders attending a religious Jewish school in Israel. One "pre-literate" meeting, in…
2017-06-01
11 Table 1 Notation for fabric and ensemble resistances . .......................................... 13 Thermal manikin...Table 1 Notation for fabric and ensemble resistances .................................................. 13 Table 2 Weight reduction of CB garment...samples were tested on a Sweating Guarded Hot Plate (SGHP) to measure fabric thermal and evaporative resistance , respectively. The ensembles were tested
Reading a Note, Reading a Mind: Children's Notating Skills and Understanding of Mind
ERIC Educational Resources Information Center
Leyva, Diana; Hopson, Sarah; Nichols, Ashley
2012-01-01
Are children's understanding of mental states (understanding of mind) related to their notating skills, that is, their ability to produce and read written marks to convey information about objects and number? Fifty-three preschoolers and kindergarteners were presented with a dictation task where they produced some written marks and were later…
ERIC Educational Resources Information Center
Kell, Clare; Sweet, John
2017-01-01
This paper shows how peer observation of learning and teaching (POLT) discussions can be augmented through the use of a dynamic visual notation that makes visible for interpretation, elements of teacher-learner and learner-earner nonverbal interactions. Making visible the nonverbal, physical, spatial and kinesics (eye-based) elements of…
The Use of Force Notation to Detect Students' Misconceptions: Mutual Interactions Case
ERIC Educational Resources Information Center
Serhane, Ahcene; Zeghdaoui, Abdelhamid; Debiache, Mehdi
2017-01-01
Using a conventional notation for representing forces on diagrams, students were presented with questions on the interaction between two objects. The results show that complete understanding of Newton's Third Law of Motion is quite rare, and that some problems relate to misunderstanding which force acts on each body. The use of the terms…
Preserving Musicality through Pictures: A Linguistic Pathway to Conventional Notation
ERIC Educational Resources Information Center
Nordquist, Alice L.
2016-01-01
The natural musicality so often present in children's singing can begin to fade as the focus of a lesson shifts to the process of reading and writing conventional notation symbols. Approaching the study of music from a linguistic perspective preserves the pace and flow that is inherent in spoken language and song. SongWorks teaching practices…
19 CFR 141.90 - Notation of tariff classification and value on invoice.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 19 Customs Duties 2 2010-04-01 2010-04-01 false Notation of tariff classification and value on... classification and value on invoice. (a) [Reserved] (b) Classification and rate of duty. The importer or customs... invoice value which have been made to arrive at the aggregate entered value. In addition, the entered unit...
Children's Invented Notations and Verbal Responses to a Piano Work by Claude Debussy
ERIC Educational Resources Information Center
Elkoshi, Rivka
2015-01-01
This study considers the way children listen to classical music composed for them and the effect of age on their spontaneous invented notations and verbal responses. The musical selection is a piano piece for children by Claude Debussy:"'Jimbo's Lullaby" from "Children's Corner". Two hundred and nine children 4-9.5-years-old…
Children's Use of Variables and Variable Notation to Represent Their Algebraic Ideas
ERIC Educational Resources Information Center
Brizuela, Bárbara M.; Blanton, Maria; Sawrey, Katharine; Newman-Owens, Ashley; Murphy Gardiner, Angela
2015-01-01
In this article, we analyze a first grade classroom episode and individual interviews with students who participated in that classroom event to provide evidence of the variety of understandings about variable and variable notation held by first grade children approximately six years of age. Our findings illustrate that given the opportunity,…
NASA Astrophysics Data System (ADS)
Nordström, Jan; Ghasemi, Fatemeh
2018-05-01
A few notational errors were recently discovered in the above publication. The notation used in the note is valid for fluxes of the form fL (u) =AL u ,fR (v) =AR v where AL =AR is m × m constant symmetric matrix.
Towards a Script-Based Representation Language for Educational Films.
ERIC Educational Resources Information Center
Parkes, Alan P.
1987-01-01
Discusses aspects of the syntax and semantics of film, and presents a scenario for the use of film by intelligent computer assisted instruction (ICAI) systems. An outline of a representation language for educational films on videodisc is presented, and an appendix provides conceptual graphs that explain notations used in examples. (Author/LRW)
Research in Review: Building Foundations for Spatial Literacy in Early Childhood
ERIC Educational Resources Information Center
Golbeck, Susan L.
2005-01-01
Words are only one way of symbolizing ideas. Numbers, pictures, graphs, maps, diagrams, photographs, and other means are also used to convey information. Researchers refer to notational systems such as graphs, diagrams, and maps as "inscriptions." Inscriptions are tools that help people to perceive and to talk about spatial worlds. Spatial…
Demonstration and Research Program for Teaching Young String Players. Final Report.
ERIC Educational Resources Information Center
Yarborough, William
This report explains a system for rapidly training beginning students in the technical aspects of playing a stringed instrument. The program also affords them a well-rounded, basic knowledge of music. A "numerical" method of notation and concentrated muscular exercises greatly speeded the technical learning process. The daily coordination of ear…
Clock Work: How Tools for Time Mediate Problem Solving and Reveal Understanding
ERIC Educational Resources Information Center
Earnest, Darrell
2017-01-01
This article reports on elementary students' understanding of time in the context of common classroom manipulatives and notational systems. Students in Grades 2 (n = 72) and 4 (n = 72) participated in problem-solving interviews involving different clocks. Quantitative results revealed that students' performances were significantly different as a…
ERIC Educational Resources Information Center
Bureau of Naval Personnel, Washington, DC.
The module covers series circuits which contain both resistive and reactive components and methods of solving these circuits for current, voltage, impedance, and phase angle. The module is divided into six lessons: voltage and impedance in AC (alternating current) series circuits, vector computations, rectangular and polar notation, variational…
29 CFR 1910.111 - Storage and handling of anhydrous ammonia.
Code of Federal Regulations, 2011 CFR
2011-07-01
... in paragraphs (c), (f), (g), and (h) of this section shall be constructed and tested in accordance...), (f), (g), and (h) of this section shall be marked as specified in the following: (a) With a notation...: Container and system nameplate. Above ground: Container. (h) With marking indicating the maximum level to...
29 CFR 1910.111 - Storage and handling of anhydrous ammonia.
Code of Federal Regulations, 2010 CFR
2010-07-01
... in paragraphs (c), (f), (g), and (h) of this section shall be constructed and tested in accordance...), (f), (g), and (h) of this section shall be marked as specified in the following: (a) With a notation...: Container and system nameplate. Above ground: Container. (h) With marking indicating the maximum level to...
78 FR 58295 - Commission Information Collection Activities (FERC-725A); Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-23
... submitting the information collection FERC-725A, Mandatory Reliability Standards for the Bulk Power System... collection analysis associated with its approval of Reliability Standard EOP-004-2, in an order published in... solicitation and is making this notation in its submission to OMB. \\1\\ North American Electric Reliability Corp...
"A Reason to Write": Exploring Writing Epistemologies in Two Contexts
ERIC Educational Resources Information Center
Pahl, Kate
2012-01-01
This article argues that it is important to take account of children's epistemologies of writing when exploring writing ecologies in homes and communities. Writing as more broadly defined by children and young people might include different forms of notation, inscription systems and decoration of objects in the home. Drawing on two research…
Perspectives on object manipulation and action grammar for percussive actions in primates
Hayashi, Misato
2015-01-01
The skill of object manipulation is a common feature of primates including humans, although there are species-typical patterns of manipulation. Object manipulation can be used as a comparative scale of cognitive development, focusing on its complexity. Nut cracking in chimpanzees has the highest hierarchical complexity of tool use reported in non-human primates. An analysis of the patterns of object manipulation in naive chimpanzees after nut-cracking demonstrations revealed the cause of difficulties in learning nut-cracking behaviour. Various types of behaviours exhibited within a nut-cracking context can be examined in terms of the application of problem-solving strategies, focusing on their basis in causal understanding or insightful intentionality. Captive chimpanzees also exhibit complex forms of combinatory manipulation, which is the precursor of tool use. A new notation system of object manipulation was invented to assess grammatical rules in manipulative actions. The notation system of action grammar enabled direct comparisons to be made between primates including humans in a variety of object-manipulation tasks, including percussive-tool use. PMID:26483528
Perspectives on object manipulation and action grammar for percussive actions in primates.
Hayashi, Misato
2015-11-19
The skill of object manipulation is a common feature of primates including humans, although there are species-typical patterns of manipulation. Object manipulation can be used as a comparative scale of cognitive development, focusing on its complexity. Nut cracking in chimpanzees has the highest hierarchical complexity of tool use reported in non-human primates. An analysis of the patterns of object manipulation in naive chimpanzees after nut-cracking demonstrations revealed the cause of difficulties in learning nut-cracking behaviour. Various types of behaviours exhibited within a nut-cracking context can be examined in terms of the application of problem-solving strategies, focusing on their basis in causal understanding or insightful intentionality. Captive chimpanzees also exhibit complex forms of combinatory manipulation, which is the precursor of tool use. A new notation system of object manipulation was invented to assess grammatical rules in manipulative actions. The notation system of action grammar enabled direct comparisons to be made between primates including humans in a variety of object-manipulation tasks, including percussive-tool use. © 2015 The Author(s).
A comprehensive map of the mTOR signaling network
Caron, Etienne; Ghosh, Samik; Matsuoka, Yukiko; Ashton-Beaucage, Dariel; Therrien, Marc; Lemieux, Sébastien; Perreault, Claude; Roux, Philippe P; Kitano, Hiroaki
2010-01-01
The mammalian target of rapamycin (mTOR) is a central regulator of cell growth and proliferation. mTOR signaling is frequently dysregulated in oncogenic cells, and thus an attractive target for anticancer therapy. Using CellDesigner, a modeling support software for graphical notation, we present herein a comprehensive map of the mTOR signaling network, which includes 964 species connected by 777 reactions. The map complies with both the systems biology markup language (SBML) and graphical notation (SBGN) for computational analysis and graphical representation, respectively. As captured in the mTOR map, we review and discuss our current understanding of the mTOR signaling network and highlight the impact of mTOR feedback and crosstalk regulations on drug-based cancer therapy. This map is available on the Payao platform, a Web 2.0 based community-wide interactive process for creating more accurate and information-rich databases. Thus, this comprehensive map of the mTOR network will serve as a tool to facilitate systems-level study of up-to-date mTOR network components and signaling events toward the discovery of novel regulatory processes and therapeutic strategies for cancer. PMID:21179025
A Physicist's view on Chopin's Études
NASA Astrophysics Data System (ADS)
Blasone, Massimo
2017-07-01
We propose the use of specific dynamical processes and more in general of ideas from Physics to model the evolution in time of musical structures. We apply this approach to two Études by F. Chopin, namely Op.10 n.3 and Op.25 n.1, proposing some original description based on concepts of symmetry breaking/restoration and quantum coherence, which could be useful for interpretation. In this analysis, we take advantage of colored musical scores, obtained by implementing Scriabin's color code for sounds to musical notation.
A General Model of Production: Theory and Application
1984-01-01
It may be verified that X2 , - (o.1) and y2a, -,O and thus dearly the nets {x2,), LA ,,) satisfy the conditions of Proposition (3.4.6) but violate the...and (4-1d) are identical. This example shows thai, two See ,ao La a a oWBO Y=1921. >........................... *’*** . . . 89 /00- aa b (a) Detailed...intensities. 4.3.1. Constructing the Domain of the Aggregate Operating Intensity L_., A represent an aggregate activity. As notation, let EA min El, LA
A signal-flow-graph approach to on-line gradient calculation.
Campolucci, P; Uncini, A; Piazza, F
2000-08-01
A large class of nonlinear dynamic adaptive systems such as dynamic recurrent neural networks can be effectively represented by signal flow graphs (SFGs). By this method, complex systems are described as a general connection of many simple components, each of them implementing a simple one-input, one-output transformation, as in an electrical circuit. Even if graph representations are popular in the neural network community, they are often used for qualitative description rather than for rigorous representation and computational purposes. In this article, a method for both on-line and batch-backward gradient computation of a system output or cost function with respect to system parameters is derived by the SFG representation theory and its known properties. The system can be any causal, in general nonlinear and time-variant, dynamic system represented by an SFG, in particular any feedforward, time-delay, or recurrent neural network. In this work, we use discrete-time notation, but the same theory holds for the continuous-time case. The gradient is obtained in a straightforward way by the analysis of two SFGs, the original one and its adjoint (obtained from the first by simple transformations), without the complex chain rule expansions of derivatives usually employed. This method can be used for sensitivity analysis and for learning both off-line and on-line. On-line learning is particularly important since it is required by many real applications, such as digital signal processing, system identification and control, channel equalization, and predistortion.
ERIC Educational Resources Information Center
Watson, Kevin E.
2010-01-01
The purpose of the present study was to investigate the effects of aural versus notated pedagogical materials on achievement and self-efficacy in instrumental jazz improvisation performance. A secondary purpose of this study was to investigate how achievement and self-efficacy may be related to selected experience variables. The sample for the…
ERIC Educational Resources Information Center
Al-Dor, Nira
2006-01-01
The objective of this study is to present "The Spiral Model for the Development of Coordination" (SMDC), a learning model that reflects the complexity and possibilities embodied in the learning of movement notation Eshkol-Wachman (EWMN), an Israeli invention. This model constituted the infrastructure for a comprehensive study that examined the…
Code of Federal Regulations, 2010 CFR
2010-04-01
...) any third-party communication notations required to be placed pursuant to § 301.6110-4(a) on the face... a written determination on which a third-party communication notation has been placed pursuant to... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Notice and time requirements; actions to...
Cognitive Development of Applying the Chain Rule through Three Worlds of Mathematics
ERIC Educational Resources Information Center
Kabael, Tangul Uygur
2010-01-01
The derivative of a composite function, taken with the chain rule is one of the important notions in calculus. This paper describes a study conducted in Turkey that shows that the chain rule was given with the formula in function notation and/or the Leibniz notation without relating these formulas to life-related problem situations in the…
NASA Technical Reports Server (NTRS)
Kolecki, Joseph C.
2005-01-01
Tensor analysis is one of the more abstruse, even if one of the more useful, higher math subjects enjoined by students of physics and engineering. It is abstruse because of the intellectual gap that exists between where most physics and engineering mathematics leave off and where tensor analysis traditionally begins. It is useful because of its great generality, computational power, and compact, easy to use, notation. This paper bridges the intellectual gap. It is divided into three parts: algebra, calculus, and relativity. Algebra: In tensor analysis, coordinate independent quantities are sought for applications in physics and engineering. Coordinate independence means that the quantities have such coordinate transformations as to leave them invariant relative to a particular observer s coordinate system. Calculus: Non-zero base vector derivatives contribute terms to dynamical equations that correspond to pseudoaccelerations in accelerated coordinate systems and to curvature or gravity in relativity. These derivatives have a specific general form in tensor analysis. Relativity: Spacetime has an intrinsic geometry. Light is the tool for investigating that geometry. Since the observed geometry of spacetime cannot be made to match the classical geometry of Euclid, Einstein applied another more general geometry differential geometry. The merger of differential geometry and cosmology was accomplished in the theory of relativity. In relativity, gravity is equivalent to curvature.
Complexity VIII. Ontology of closure in complex systems: The C* hypothesis and the O° notation
NASA Astrophysics Data System (ADS)
Chandler, Jerry LR
1999-03-01
Closure is a common characteristic of mathematical, natural and socio-cultural systems. Whether one is describing a graph, a molecule, a cell, a human, or a nation state, closure is implicitly understood. An objective of this paper is to continue a construction of a systematic framework for closure which is sufficient for future quantitative transdisciplinary investigations. A further objective is to extend the Birkhoff-von Neumann criterion for quantum systems to complex natural objects. The C* hypothesis is being constructed to be consistent with algebraic category theory (Ehresmann and Vanbremeersch, 1987, 1997, Chandler, 1990, 1991, Chandler, Ehresmann and Vanbremeersch, 1996). Five aspects of closure will be used to construct a framework for categories of complex systems: 1. Truth functions in mathematics and the natural sciences 2. Systematic descriptions in the mks and O° notations 3. Organizational structures in hierarchical scientific languages 4. Transitive organizational pathways in the causal structures of complex behaviors 5. Composing additive, multiplicative and exponential operations in complex systems Truth functions can be formal or objective or subjective, depending on the complexity of the system and on our capability to represent the fine structure of the system symbolically, observationally or descriptively. "Complete" material representations of the fine structure of a system may allow truth functions to be created over sets of one to one correspondences. Less complete descriptions can support less stringent truth functions based on coherence or subjective judgments. The role of human values in creating and perpetuating truth functions can be placed in context of the degree of fine structure in the system's description. The organization of complex systems are hypothesized to be categorizable into degrees relative to one another, thereby creating an ordering relationship. This ordering relationship is denoted by the symbols: O°1, O°2,O°3... For example, for material systems, an ordering relation such as particles, atoms, molecules, cells, tissues, organs, individuals and social groups might be assigned to classify observations for medical purposes. The C* hypothesis asserts that any complex system can be described in terms of four enumerable concepts: closure, conformation, concatenation and cyclicity. Mappings between objects are constructed within a notation for organization. Causality is organized within C* as pathways of relationships in time. The notation of organizational degrees is used to distinguish a directionality for causality: 1. bottom-up (energy flows) 2. top-down (control processes or dominating variables), 3. outside — inward (ecoment on organism) and 4. inside — outward (organism on ecoment). Closures are asserted to emerge from evolutionary cooperation. It is asserted that truth functions emerged from the necessity of an organism to identify ecoments where life can prosper. For example, basic truth functions of mathematics (operations of addition, multiplication and exponentiation) are made operationally consistent within the biochemical operations of sustaining exponential cellular growth. These fundamental mathematical functions can provide a logical basis (in conjunction with conservation rules) for a construction of complex material categories at higher degrees of organization. It is remarked that these simple functions suggests a biochemical origin for the intuitionistic philosophy of mathematics. The emergence and success of mathematics is conjectured to result from the need to acquire a consistent basis for communication among individuals seeking to cooperate socially. This suggests a cultural closure over a collection of individual closures.
Clinical examination & record-keeping: Part 2: History taking.
Hadden, A M
2017-12-15
This article is the second part of a BDJ series of Practice papers on the subject of clinical examination and related record keeping. The series is taken from the Faculty of General Dental Practice UK (FGDP[UK]) 2016 Good Practice Guidelines book on this topic, edited by A. M. Hadden. This particular article discusses history taking, where information may be gathered prior to the patient seeing the clinician or, in some cases, this may be carried out chairside by the individual. The information gathered can include a medical history, socio-behavioural history, and patient anxiety levels. It is important to note that throughout this article (and the BDJ series and associated FGDP[UK] book), the specific guidelines will be marked as follows: A: Aspirational, B: Basic, C: Conditional. Further information about this guideline notation system is provided in Part 1 of this series ( 2017; 223: 765-768).
BASIC MATHEMATICS I FOR THE SECONDARY SCHOOLS.
ERIC Educational Resources Information Center
MCCARTHY, CHARLES T.; AND OTHERS
THE COURSE IS GEARED TO MEET THE NEEDS OF STUDENTS ENTERING SENIOR HIGH SCHOOL WITH A MATHEMATICS ACHIEVEMENT LEVEL BELOW SIXTH GRADE. SINCE TWO PRINCIPAL CAUSES OF SERIOUS DEFICIENCIES IN ARITHMETIC ARE A LACK OF UNDERSTANDING OF THE DECIMAL SYSTEM OF NOTATION AND A LACK OF KNOWLEDGE OF THE BASIC FUNDAMENTALS OF ARITHMETIC, BASIC CONCEPTS MUST BE…
ERIC Educational Resources Information Center
Dania, Aspasia; Tyrovola, Vasiliki; Koutsouba, Maria
2017-01-01
The aim of this paper is to present the design and evaluate the impact of a Laban Notation-based method for Teaching Dance (LANTD) on novice dancers' performance, in the case of Greek traditional dance. In this research, traditional dance is conceived in its "second existence" as a kind of presentational activity performed outside its…
Goal Structured Notation in a Radiation Hardening Safety Case for COTS-Based Spacecraft
NASA Technical Reports Server (NTRS)
Witulski, Arthur; Austin, Rebekah; Reed, Robert; Karsai, Gabor; Mahadevan, Nag; Sierawski, Brian; Evans, John; LaBel, Ken
2016-01-01
A systematic approach is presented to constructing a radiation assurance case using Goal Structured Notation (GSN) for spacecraft containing COTS parts. The GSN paradigm is applied to an SRAM single-event upset experiment board designed to fly on a CubeSat November 2016. Construction of a radiation assurance case without use of hardened parts or extensive radiation testing is discussed.
M&S Journal. Volume 8, Issue 2, Summer 2013
2013-01-01
Modeling Notation ( BPMN ) [White and Miers, 2008], and the integration of the modeling notation with executable simulation engines [Anupindi 2005...activities and the supporting IT in BPMN and use that to compute MOE for a mission instance. Requirements for Modeling Missions To understand the...representation versus impact computation tradeoffs we selected BPMN , along with some proposed extensions to represent information dependencies, as the
1985-10-01
Stevie Wonder "] @begin[address] Mr. Stevie Wonder 111 Super Street...enthusiastic president for your Stevie Wonder Fan Club, you know you can call on me. @end[body] Yours forever, Ms. Fan Ardent @begin[notations] FA/fa cc: @tMr...Peter Allen @\\Ms. Aretha Franklin Enc. "A Groupie’s View of Stevie Wonder " @end[notations] -7 55 October 31, 1981 Mr. Stevie Wonder 111
Representation and presentation of requirements knowledge
NASA Technical Reports Server (NTRS)
Johnson, W. L.; Feather, Martin S.; Harris, David R.
1992-01-01
An approach to representation and presentation of knowledge used in the ARIES, an experimental requirements/specification environment, is described. The approach applies the notion of a representation architecture to the domain of software engineering and incorporates a strong coupling to a transformation system. It is characterized by a single highly expressive underlying representation, interfaced simultaneously to multiple presentations, each with notations of differing degrees of expressivity. This enables analysts to use multiple languages for describing systems and have these descriptions yield a single consistent model of the system.
2014-03-31
BPMN ). This is when the...to a model-‐centric approach. The AGM was developed using the iGrafx6 tool with BPMN [12... BPMN notation as shown in Figure 14. It provides a time-‐sequenced perspective on the process
Factorizable Upwind Schemes: The Triangular Unstructured Grid Formulation
NASA Technical Reports Server (NTRS)
Sidilkover, David; Nielsen, Eric J.
2001-01-01
The upwind factorizable schemes for the equations of fluid were introduced recently. They facilitate achieving the Textbook Multigrid Efficiency (TME) and are expected also to result in the solvers of unparalleled robustness. The approach itself is very general. Therefore, it may well become a general framework for the large-scale, Computational Fluid Dynamics. In this paper we outline the triangular grid formulation of the factorizable schemes. The derivation is based on the fact that the factorizable schemes can be expressed entirely using vector notation. without explicitly mentioning a particular coordinate frame. We, describe the resulting discrete scheme in detail and present some computational results verifying the basic properties of the scheme/solver.
NASA Astrophysics Data System (ADS)
Hamilton, D. P.; Asbury, M. L.
1999-12-01
The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed and maintained at the University of Maryland for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: Animated Orbits of Planets and Moons: The orbits of the nine planets and 63 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of explosion, crater size, and magnitude of the ``planetquake'' generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Scale of the Universe: Travel away from the Earth at a chosen speed and see how long it takes to reach other planets, stars and galaxies. This tool helps students visualize astronomical distances in an intuitive way. Scientific Notation: Students are interactively guided through conversions between scientific notation and regular numbers. Orbital Simulations: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. Astronomy Workshop Bulletin Board: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by NSF.
NASA Astrophysics Data System (ADS)
Hamilton, D. P.; Asbury, M. L.
2000-05-01
The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed and maintained at the University of Maryland for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: ANIMATED ORBITS OF PLANETS AND MOONS: The orbits of the nine planets and 63 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. SOLAR SYSTEM COLLISIONS: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of explosion, crater size, and magnitude of the ``planetquake'' generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). SCALE OF THE UNIVERSE: Travel away from the Earth at a chosen speed and see how long it takes to reach other planets, stars and galaxies. This tool helps students visualize astronomical distances in an intuitive way. SCIENTIFIC NOTATION: Students are interactively guided through conversions between scientific notation and regular numbers. ORBITAL SIMULATIONS: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. ASTRONOMY WORKSHOP BULLETIN BOARD: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by NSF.
NASA Astrophysics Data System (ADS)
Hamilton, D. P.; Asbury, M. L.
1999-09-01
The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed and maintained at the University of Maryland for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: Animated Orbits of Planets and Moons: The orbits of the nine planets and 63 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of explosion, crater size, and magnitude of the ``planetquake'' generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Scale of the Universe: Travel away from the Earth at a chosen speed and see how long it takes to reach other planets, stars and galaxies. This tool helps students visualize astronomical distances in an intuitive way. Scientific Notation: Students are interactively guided through conversions between scientific notation and regular numbers. Orbital Simulations: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. Astronomy Workshop Bulletin Board: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by NSF.
Gorman Ng, Melanie; Milon, Antoine; Vernez, David; Lavoué, Jérôme
2016-04-01
Occupational hygiene practitioners typically assess the risk posed by occupational exposure by comparing exposure measurements to regulatory occupational exposure limits (OELs). In most jurisdictions, OELs are only available for exposure by the inhalation pathway. Skin notations are used to indicate substances for which dermal exposure may lead to health effects. However, these notations are either present or absent and provide no indication of acceptable levels of exposure. Furthermore, the methodology and framework for assigning skin notation differ widely across jurisdictions resulting in inconsistencies in the substances that carry notations. The UPERCUT tool was developed in response to these limitations. It helps occupational health stakeholders to assess the hazard associated with dermal exposure to chemicals. UPERCUT integrates dermal quantitative structure-activity relationships (QSARs) and toxicological data to provide users with a skin hazard index called the dermal hazard ratio (DHR) for the substance and scenario of interest. The DHR is the ratio between the estimated 'received' dose and the 'acceptable' dose. The 'received' dose is estimated using physico-chemical data and information on the exposure scenario provided by the user (body parts exposure and exposure duration), and the 'acceptable' dose is estimated using inhalation OELs and toxicological data. The uncertainty surrounding the DHR is estimated with Monte Carlo simulation. Additional information on the selected substances includes intrinsic skin permeation potential of the substance and the existence of skin notations. UPERCUT is the only available tool that estimates the absorbed dose and compares this to an acceptable dose. In the absence of dermal OELs it provides a systematic and simple approach for screening dermal exposure scenarios for 1686 substances. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.
Murphy, Alistair P; Duffield, Rob; Kellett, Aaron; Reid, Machar
2014-09-01
To investigate the discrepancy between coach and athlete perceptions of internal load and notational analysis of external load in elite junior tennis. Fourteen elite junior tennis players and 6 international coaches were recruited. Ratings of perceived exertion (RPEs) were recorded for individual drills and whole sessions, along with a rating of mental exertion, coach rating of intended session exertion, and athlete heart rate (HR). Furthermore, total stroke count and unforced-error count were notated using video coding after each session, alongside coach and athlete estimations of shots and errors made. Finally, regression analyses explained the variance in the criterion variables of athlete and coach RPE. Repeated-measures analyses of variance and interclass correlation coefficients revealed that coaches significantly (P < .01) underestimated athlete session RPE, with only moderate correlation (r = .59) demonstrated between coach and athlete. However, athlete drill RPE (P = .14; r = .71) and mental exertion (P = .44; r = .68) were comparable and substantially correlated. No significant differences in estimated stroke count were evident between athlete and coach (P = .21), athlete notational analysis (P = .06), or coach notational analysis (P = .49). Coaches estimated significantly greater unforced errors than either athletes or notational analysis (P < .01). Regression analyses found that 54.5% of variance in coach RPE was explained by intended session exertion and coach drill RPE, while drill RPE and peak HR explained 45.3% of the variance in athlete session RPE. Coaches misinterpreted session RPE but not drill RPE, while inaccurately monitoring error counts. Improved understanding of external- and internal-load monitoring may help coach-athlete relationships in individual sports like tennis avoid maladaptive training.
Analysis, Simulation, and Verification of Knowledge-Based, Rule-Based, and Expert Systems
NASA Technical Reports Server (NTRS)
Hinchey, Mike; Rash, James; Erickson, John; Gracanin, Denis; Rouff, Chris
2010-01-01
Mathematically sound techniques are used to view a knowledge-based system (KBS) as a set of processes executing in parallel and being enabled in response to specific rules being fired. The set of processes can be manipulated, examined, analyzed, and used in a simulation. The tool that embodies this technology may warn developers of errors in their rules, but may also highlight rules (or sets of rules) in the system that are underspecified (or overspecified) and need to be corrected for the KBS to operate as intended. The rules embodied in a KBS specify the allowed situations, events, and/or results of the system they describe. In that sense, they provide a very abstract specification of a system. The system is implemented through the combination of the system specification together with an appropriate inference engine, independent of the algorithm used in that inference engine. Viewing the rule base as a major component of the specification, and choosing an appropriate specification notation to represent it, reveals how additional power can be derived from an approach to the knowledge-base system that involves analysis, simulation, and verification. This innovative approach requires no special knowledge of the rules, and allows a general approach where standardized analysis, verification, simulation, and model checking techniques can be applied to the KBS.
Goal Structuring Notation in a Radiation Hardening Assurance Case for COTS-Based Spacecraft
NASA Technical Reports Server (NTRS)
Witulski, Arthur; Austin, Rebekah; Evans, John; Mahadevan, Nag; Karsai, Gabor; Sierawski, Brian; LaBel, Ken; Reed, Robert; Schrimpf, Ron
2016-01-01
A systematic approach is presented to constructing a radiation assurance case using Goal Structuring Notation (GSN) for spacecraft containing commercial-off-the-shelf (COTS) parts. The GSN paradigm is applied to an SRAM single-event upset experiment board designed to fly on a CubeSat November 2016. Construction of a radiation assurance case without use of hardened parts or extensive radiation testing is discussed.
Creating Royal Australian Navy Standard Operating Procedures using Flow Diagrams
2015-08-01
DST-Group-TR-3137 UNCLASSIFIED Acronyms 4TQ 4TQ Toolkit ABR Australian Book of Reference ADF Australian Defence Force BPMN Business...steps to perform the activity. Object Management Group’s (OMG) Business Process Model and Notation ( BPMN ) [10] is becoming the standard to use when...Department of Defence 10. Object Management Group, Business Process Model and Notation ( BPMN ), version 2.0. 2011, Object Management Group: http
SPS phase control system performance via analytical simulation
NASA Technical Reports Server (NTRS)
Lindsey, W. C.; Kantak, A. V.; Chie, C. M.; Booth, R. W. D.
1979-01-01
A solar power satellite transmission system which incorporates automatic beam forming, steering, and phase control is discussed. The phase control concept centers around the notation of an active retrodirective phased array as a means of pointing the beam to the appropriate spot on Earth. The transmitting antenna (spacetenna) directs the high power beam so that it focuses on the ground-based receiving antenna (rectenna). A combination of analysis and computerized simulation was conducted to determine the far field performance of the reference distribution system, and the beam forming and microwave power generating systems.
An Avatar-Based Italian Sign Language Visualization System
NASA Astrophysics Data System (ADS)
Falletto, Andrea; Prinetto, Paolo; Tiotto, Gabriele
In this paper, we present an experimental system that supports the translation from Italian to Italian Sign Language (ISL) of the deaf and its visualization through a virtual character. Our objective is to develop a complete platform useful for any application and reusable on several platforms including Web, Digital Television and offline text translation. The system relies on a database that stores both a corpus of Italian words and words coded in the ISL notation system. An interface for the insertion of data is implemented, that allows future extensions and integrations.
Approximate solutions to Mathieu's equation
NASA Astrophysics Data System (ADS)
Wilkinson, Samuel A.; Vogt, Nicolas; Golubev, Dmitry S.; Cole, Jared H.
2018-06-01
Mathieu's equation has many applications throughout theoretical physics. It is especially important to the theory of Josephson junctions, where it is equivalent to Schrödinger's equation. Mathieu's equation can be easily solved numerically, however there exists no closed-form analytic solution. Here we collect various approximations which appear throughout the physics and mathematics literature and examine their accuracy and regimes of applicability. Particular attention is paid to quantities relevant to the physics of Josephson junctions, but the arguments and notation are kept general so as to be of use to the broader physics community.
de Bruin, Jeroen S; Adlassnig, Klaus-Peter; Leitich, Harald; Rappelsberger, Andrea
2018-01-01
Evidence-based clinical guidelines have a major positive effect on the physician's decision-making process. Computer-executable clinical guidelines allow for automated guideline marshalling during a clinical diagnostic process, thus improving the decision-making process. Implementation of a digital clinical guideline for the prevention of mother-to-child transmission of hepatitis B as a computerized workflow, thereby separating business logic from medical knowledge and decision-making. We used the Business Process Model and Notation language system Activiti for business logic and workflow modeling. Medical decision-making was performed by an Arden-Syntax-based medical rule engine, which is part of the ARDENSUITE software. We succeeded in creating an electronic clinical workflow for the prevention of mother-to-child transmission of hepatitis B, where institution-specific medical decision-making processes could be adapted without modifying the workflow business logic. Separation of business logic and medical decision-making results in more easily reusable electronic clinical workflows.
VISIBIOweb: visualization and layout services for BioPAX pathway models
Dilek, Alptug; Belviranli, Mehmet E.; Dogrusoz, Ugur
2010-01-01
With recent advancements in techniques for cellular data acquisition, information on cellular processes has been increasing at a dramatic rate. Visualization is critical to analyzing and interpreting complex information; representing cellular processes or pathways is no exception. VISIBIOweb is a free, open-source, web-based pathway visualization and layout service for pathway models in BioPAX format. With VISIBIOweb, one can obtain well-laid-out views of pathway models using the standard notation of the Systems Biology Graphical Notation (SBGN), and can embed such views within one's web pages as desired. Pathway views may be navigated using zoom and scroll tools; pathway object properties, including any external database references available in the data, may be inspected interactively. The automatic layout component of VISIBIOweb may also be accessed programmatically from other tools using Hypertext Transfer Protocol (HTTP). The web site is free and open to all users and there is no login requirement. It is available at: http://visibioweb.patika.org. PMID:20460470
ERIC Educational Resources Information Center
Ellingsen, Ryleigh; Clinton, Elias
2017-01-01
This manuscript reviews the empirical literature of the TouchMath© instructional program. The TouchMath© program is a commercial mathematics series that uses a dot notation system to provide multisensory instruction of computation skills. Using the program, students are taught to solve computational tasks in a multisensory manner that does not…
ERIC Educational Resources Information Center
Stodola, Janet
Written to fulfill the requirements for a University of Minnesota College of Education off-campus Indian education course for public school teachers, this Native American curriculum unit for middle and high school reflects the mathematical achievements of the Maya, Aztec, and Inca Indians. The number systems, notation, and calendar techniques of…
ERIC Educational Resources Information Center
International Phonetic Association.
This guide contains concise information on the International Phonetic Alphabet, a universally agreed system of notation in use for over a century, for the sounds of languages, and guidance on how to use it. The handbook replaces the previous edition, "Principles of the International Phonetic Association," which has not been revised since 1949.…
Teletouch Display Development. Phase 1
1988-07-01
Final FROM Oct 1987 TO Dec 1987 July 1988 68 16. SUPPLEMENTARY NOTATION 17. COSATI CODES 18. SUBJECT TERMS (.Miummmmya i m* r Nod 1ŕ FIELD GROUP SUB...experimental apparatus ............ 26 6. Imperfect transmission of information ........................ 27 A-1. Technological taxonomy of contact...to the teleoperator, remote systems are difficult to field that possess a high degree of dextrous manipulative and haptic abilities. This report
An assessment of DREAM, appendix E
NASA Technical Reports Server (NTRS)
Riddle, W. E.
1980-01-01
The design realization, evaluation and modelling (DREAM) system is evaluated. A short history of the DREAM research project is given as well as the significant characteristics of DREAM as a development environment. The design notation which is the basis for the DREAM system is reviewed, and the development tools envisioned as part of DREAM are discussed. Insights into development environments and their production are presented and used to make suggestions for future work in the area of development environments.
A UML profile for the OBO relation ontology
2012-01-01
Background Ontologies have increasingly been used in the biomedical domain, which has prompted the emergence of different initiatives to facilitate their development and integration. The Open Biological and Biomedical Ontologies (OBO) Foundry consortium provides a repository of life-science ontologies, which are developed according to a set of shared principles. This consortium has developed an ontology called OBO Relation Ontology aiming at standardizing the different types of biological entity classes and associated relationships. Since ontologies are primarily intended to be used by humans, the use of graphical notations for ontology development facilitates the capture, comprehension and communication of knowledge between its users. However, OBO Foundry ontologies are captured and represented basically using text-based notations. The Unified Modeling Language (UML) provides a standard and widely-used graphical notation for modeling computer systems. UML provides a well-defined set of modeling elements, which can be extended using a built-in extension mechanism named Profile. Thus, this work aims at developing a UML profile for the OBO Relation Ontology to provide a domain-specific set of modeling elements that can be used to create standard UML-based ontologies in the biomedical domain. Results We have studied the OBO Relation Ontology, the UML metamodel and the UML profiling mechanism. Based on these studies, we have proposed an extension to the UML metamodel in conformance with the OBO Relation Ontology and we have defined a profile that implements the extended metamodel. Finally, we have applied the proposed UML profile in the development of a number of fragments from different ontologies. Particularly, we have considered the Gene Ontology (GO), the PRotein Ontology (PRO) and the Xenopus Anatomy and Development Ontology (XAO). Conclusions The use of an established and well-known graphical language in the development of biomedical ontologies provides a more intuitive form of capturing and representing knowledge than using only text-based notations. The use of the profile requires the domain expert to reason about the underlying semantics of the concepts and relationships being modeled, which helps preventing the introduction of inconsistencies in an ontology under development and facilitates the identification and correction of errors in an already defined ontology. PMID:23095840
Modelling the Shuttle Remote Manipulator System: Another flexible model
NASA Technical Reports Server (NTRS)
Barhorst, Alan A.
1993-01-01
High fidelity elastic system modeling algorithms are discussed. The particular system studied is the Space Shuttle Remote Manipulator System (RMS) undergoing full articulated motion. The model incorporates flexibility via a methodology the author has been developing. The technique is based in variational principles, so rigorous boundary condition generation and weak formulations for the associated partial differential equations are realized, yet the analyst need not integrate by parts. The methodology is formulated using vector-dyad notation with minimal use of tensor notation, therefore the technique is believed to be affable to practicing engineers. The objectives of this work are as follows: (1) determine the efficacy of the modeling method; and (2) determine if the method affords an analyst advantages in the overall modeling and simulation task. Generated out of necessity were Mathematica algorithms that quasi-automate the modeling procedure and simulation development. The project was divided into sections as follows: (1) model development of a simplified manipulator; (2) model development of the full-freedom RMS including a flexible movable base on a six degree of freedom orbiter (a rigid-body is attached to the manipulator end-effector); (3) simulation development for item 2; and (4) comparison to the currently used model of the flexible RMS in the Structures and Mechanics Division of NASA JSC. At the time of the writing of this report, items 3 and 4 above were not complete.
Systems Biology Graphical Notation: Activity Flow language Level 1 Version 1.2.
Mi, Huaiyu; Schreiber, Falk; Moodie, Stuart; Czauderna, Tobias; Demir, Emek; Haw, Robin; Luna, Augustin; Le Novère, Nicolas; Sorokin, Anatoly; Villéger, Alice
2015-09-04
The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Activity Flow language represents the influences of activities among various entities within a network. Unlike SBGN PD and ER that focus on the entities and their relationships with others, SBGN AF puts the emphasis on the functions (or activities) performed by the entities, and their effects to the functions of the same or other entities. The nodes (elements) describe the biological activities of the entities, such as protein kinase activity, binding activity or receptor activity, which can be easily mapped to Gene Ontology molecular function terms. The edges (connections) provide descriptions of relationships (or influences) between the activities, e.g., positive influence and negative influence. Among all three languages of SBGN, AF is the closest to signaling pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.
Jimenez-Molina, Angel; Gaete-Villegas, Jorge; Fuentes, Javier
2018-06-01
New advances in telemedicine, ubiquitous computing, and artificial intelligence have supported the emergence of more advanced applications and support systems for chronic patients. This trend addresses the important problem of chronic illnesses, highlighted by multiple international organizations as a core issue in future healthcare. Despite the myriad of exciting new developments, each application and system is designed and implemented for specific purposes and lacks the flexibility to support different healthcare concerns. Some of the known problems of such developments are the integration issues between applications and existing healthcare systems, the reusability of technical knowledge in the creation of new and more sophisticated systems and the usage of data gathered from multiple sources in the generation of new knowledge. This paper proposes a framework for the development of chronic disease support systems and applications as an answer to these shortcomings. Through this framework our pursuit is to create a common ground methodology upon which new developments can be created and easily integrated to provide better support to chronic patients, medical staff and other relevant participants. General requirements are inferred for any support system from the primary attention process of chronic patients by the Business Process Management Notation. Numerous technical approaches are proposed to design a general architecture that considers the medical organizational requirements in the treatment of a patient. A framework is presented for any application in support of chronic patients and evaluated by a case study to test the applicability and pertinence of the solution. Copyright © 2018 Elsevier Inc. All rights reserved.
A technique for solving constraint satisfaction problems using Prolog's definite clause grammars
NASA Technical Reports Server (NTRS)
Nachtsheim, Philip R.
1988-01-01
A new technique for solving constraint satisfaction problems using Prolog's definite clause grammars is presented. It exploits the fact that the grammar rule notation can be viewed as a state exchange notation. The novel feature of the technique is that it can perform informed as well as blind search. It provides the Prolog programmer with a new technique for application to a wide range of design, scheduling, and planning problems.
2012-06-01
THIS PAGE INTENTIONALLY LEFT BLANK xv LIST OF ACRONYMS AND ABBREVIATIONS BPM Business Process Model BPMN Business Process Modeling Notation C&A...checking leads to an improvement in the quality and success of enterprise software development. Business Process Modeling Notation ( BPMN ) is an...emerging standard that allows business processes to be captured in a standardized format. BPMN lacks formal semantics which leaves many of its features
Perceptual expertise and top-down expectation of musical notation engages the primary visual cortex.
Wong, Yetta Kwailing; Peng, Cynthia; Fratus, Kristyn N; Woodman, Geoffrey F; Gauthier, Isabel
2014-08-01
Most theories of visual processing propose that object recognition is achieved in higher visual cortex. However, we show that category selectivity for musical notation can be observed in the first ERP component called the C1 (measured 40-60 msec after stimulus onset) with music-reading expertise. Moreover, the C1 note selectivity was observed only when the stimulus category was blocked but not when the stimulus category was randomized. Under blocking, the C1 activity for notes predicted individual music-reading ability, and behavioral judgments of musical stimuli reflected music-reading skill. Our results challenge current theories of object recognition, indicating that the primary visual cortex can be selective for musical notation within the initial feedforward sweep of activity with perceptual expertise and with a testing context that is consistent with the expertise training, such as blocking the stimulus category for music reading.
Olvingson, C; Hallberg, N; Timpka, T; Lindqvist, K
2002-01-01
To evaluate Use Case Maps (UCMs) as a technique for Requirements Engineering (RE) in the development of information systems with functions for spatial analyses in inter-organizational public health settings. In this study, Participatory Action Research (PAR) is used to explore the UCM notation for requirements elicitation and to gather the opinions of the users. The Delphi technique is used to reach consensus in the construction of UCMs. The results show that UCMs can provide a visualization of the system's functionality and in combination with PAR provide a sound basis for gathering requirements in inter-organizational settings. UCMs were found to represent a suitable level for describing the organization and the dynamic flux of information including spatial resolution to all stakeholders. Moreover, by using PAR, the voices of the users and their tacit knowledge is intercepted. Further, UCMs are found useful in generating intuitive requirements by the creation of use cases. With UCMs and PAR it is possible to study the effects of design changes in the general information display and the spatial resolution in the same context. Both requirements on the information system in general and the functions for spatial analyses are possible to elicit when identifying the different responsibilities and the demands on spatial resolution associated to the actions of each administrative unit. However, the development process of UCM is not well documented and needs further investigation and formulation of guidelines.
Using a CLIPS expert system to automatically manage TCP/IP networks and their components
NASA Technical Reports Server (NTRS)
Faul, Ben M.
1991-01-01
A expert system that can directly manage networks components on a Transmission Control Protocol/Internet Protocol (TCP/IP) network is described. Previous expert systems for managing networks have focused on managing network faults after they occur. However, this proactive expert system can monitor and control network components in near real time. The ability to directly manage network elements from the C Language Integrated Production System (CLIPS) is accomplished by the integration of the Simple Network Management Protocol (SNMP) and a Abstract Syntax Notation (ASN) parser into the CLIPS artificial intelligence language.
Hybrid automated reliability predictor integrated work station (HiREL)
NASA Technical Reports Server (NTRS)
Bavuso, Salvatore J.
1991-01-01
The Hybrid Automated Reliability Predictor (HARP) integrated reliability (HiREL) workstation tool system marks another step toward the goal of producing a totally integrated computer aided design (CAD) workstation design capability. Since a reliability engineer must generally graphically represent a reliability model before he can solve it, the use of a graphical input description language increases productivity and decreases the incidence of error. The captured image displayed on a cathode ray tube (CRT) screen serves as a documented copy of the model and provides the data for automatic input to the HARP reliability model solver. The introduction of dependency gates to a fault tree notation allows the modeling of very large fault tolerant system models using a concise and visually recognizable and familiar graphical language. In addition to aiding in the validation of the reliability model, the concise graphical representation presents company management, regulatory agencies, and company customers a means of expressing a complex model that is readily understandable. The graphical postprocessor computer program HARPO (HARP Output) makes it possible for reliability engineers to quickly analyze huge amounts of reliability/availability data to observe trends due to exploratory design changes.
Kuchinke, Wolfgang; Ohmann, Christian; Verheij, Robert A; van Veen, Evert-Ben; Arvanitis, Theodoros N; Taweel, Adel; Delaney, Brendan C
2014-12-01
To develop a model describing core concepts and principles of data flow, data privacy and confidentiality, in a simple and flexible way, using concise process descriptions and a diagrammatic notation applied to research workflow processes. The model should help to generate robust data privacy frameworks for research done with patient data. Based on an exploration of EU legal requirements for data protection and privacy, data access policies, and existing privacy frameworks of research projects, basic concepts and common processes were extracted, described and incorporated into a model with a formal graphical representation and a standardised notation. The Unified Modelling Language (UML) notation was enriched by workflow and own symbols to enable the representation of extended data flow requirements, data privacy and data security requirements, privacy enhancing techniques (PET) and to allow privacy threat analysis for research scenarios. Our model is built upon the concept of three privacy zones (Care Zone, Non-care Zone and Research Zone) containing databases, data transformation operators, such as data linkers and privacy filters. Using these model components, a risk gradient for moving data from a zone of high risk for patient identification to a zone of low risk can be described. The model was applied to the analysis of data flows in several general clinical research use cases and two research scenarios from the TRANSFoRm project (e.g., finding patients for clinical research and linkage of databases). The model was validated by representing research done with the NIVEL Primary Care Database in the Netherlands. The model allows analysis of data privacy and confidentiality issues for research with patient data in a structured way and provides a framework to specify a privacy compliant data flow, to communicate privacy requirements and to identify weak points for an adequate implementation of data privacy. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
Chart of conversion factors: From English to metric system and metric to English system
,
1976-01-01
The conversion factors in the following tables are for conversion of our customary (English) units of measurement to SI*units, and for convenience, reciprocals are shown for converting SI units back to the English system. The first table contains rule-of-thumb figures, useful for "getting the feel" of SI units or mental estimation. The succeeding tables contain factors accurate to 3 or more significant figures. Please refer to known reference volumes for additional accuracy, as well as for factors dealing with other scientific notation involving SI units.
Interactive Classification Technology
NASA Technical Reports Server (NTRS)
deBessonet, Cary
2000-01-01
The investigators upgraded a knowledge representation language called SL (Symbolic Language) and an automated reasoning system called SMS (Symbolic Manipulation System) to enable the more effective use of the technologies in automated reasoning and interactive classification systems. The overall goals of the project were: 1) the enhancement of the representation language SL to accommodate a wider range of meaning; 2) the development of a default inference scheme to operate over SL notation as it is encoded; and 3) the development of an interpreter for SL that would handle representations of some basic cognitive acts and perspectives.
2014-03-31
BPMN ). This is when the MITRE Acquisition Guidance Model (AGM) model effort was...developed using the iGrafx6 tool with BPMN [12]. The AGM provides a high-‐level characterization of...the activities, events and messages using a BPMN notation as shown in Figure 14. It
A Model-Based Diagnosis Framework for Distributed Systems
2002-05-04
of centralized compilation techniques as applied to [6] Marco Cadoli and Francesco M . Donini . A survey several areas, of which diagnosis is one. Our...for doing so than the family for that (1) Vi 1 ... m . Xi E 2V; (2) V ui(Xi[Xi E 1). tree-structured systems. For simplicity of notation, we will that (i...our diagnosis synthesis diagnoses using a likelihood weight ri assigned to each as- algorithm. sumable Ai, i = I, ... m . Using the likelihood algebra
Bisonar Signal Perception and Analysis.
1986-02-14
DC 2033-6448 ELEMENT NO. NO. NO. No. It. TITLE tlfteiude &ca.iI Caiiesionp10--- 61102F I(j7 A4 . Biosonar sig~nal percention and analysis _______J...SUPPLEMENTARY NOTATION. 1.COSATI CODIES 111 ISusi UCT RMS (Con. tue an rverse it moe,~r ai entift by" ftaR -FliL .FlOUP I SUB. on. fiOA4c biosonar ...anatomica *7orrelates of the biosonar system of bats. lie have used a simulated flight system to record signal emissions and to analyze the response
Applying STAMP in Accident Analysis
NASA Technical Reports Server (NTRS)
Leveson, Nancy; Daouk, Mirna; Dulac, Nicolas; Marais, Karen
2003-01-01
Accident models play a critical role in accident investigation and analysis. Most traditional models are based on an underlying chain of events. These models, however, have serious limitations when used for complex, socio-technical systems. Previously, Leveson proposed a new accident model (STAMP) based on system theory. In STAMP, the basic concept is not an event but a constraint. This paper shows how STAMP can be applied to accident analysis using three different views or models of the accident process and proposes a notation for describing this process.
Statecharts Via Process Algebra
NASA Technical Reports Server (NTRS)
Luttgen, Gerald; vonderBeeck, Michael; Cleaveland, Rance
1999-01-01
Statecharts is a visual language for specifying the behavior of reactive systems. The Language extends finite-state machines with concepts of hierarchy, concurrency, and priority. Despite its popularity as a design notation for embedded system, precisely defining its semantics has proved extremely challenging. In this paper, a simple process algebra, called Statecharts Process Language (SPL), is presented, which is expressive enough for encoding Statecharts in a structure-preserving and semantic preserving manner. It is establish that the behavioral relation bisimulation, when applied to SPL, preserves Statecharts semantics
A Knowledge-Based Approach to Language Production
1985-08-01
representation -- the internal structures which the system is generating from. and (3) the choice problem -- how the intricate relationship between the...texts from several different internal representations. One example of the output produced by MUMBLE is the following text, produced from a...brackets. This notation is used to illustrate some templates which are encoded in Ace. The internal representation of these templates is achieved using
ERIC Educational Resources Information Center
Loehr, Abbey M.; Rittle-Johnson, Bethany
2017-01-01
Research has demonstrated that providing labels helps children notice key features of examples. Much less is known about how different labels impact children's ability to make inferences about the structure underlying mathematical notation. We tested the impact of labeling decimals such as 0.34 using formal place-value labels ("3 tenths and 4…
Human Systems Integration Design Environment (HSIDE)
2012-04-09
quality of the resulting HSI products. 15. SUBJECT TERMS HSI , Manning Estimation and Validation , Risk Assessment, I POE, PLM, BPMN , Workflow...business process model in Business Process Modeling Notation ( BPMN ) or the actual workflow template associated with the specific functional area, again...as filtered by the user settings in the high level interface. Figure 3 shows the initial screen which allows the user to select either the BPMN or
Analysis of environmental impact assessment (EIA) system in Turkey.
Coşkun, Aynur Aydın; Turker, Ozhan
2011-04-01
The Environmental Impact Assessment (EIA) System, which embodies the "prevention principle" of the environmental law, is an important tool for environmental protection. This tool has a private importance for Turkey since it is a developing country, and it entered the Turkish law in 1983 with the Environmental Law. Besides, the EIA Regulation, which shows the application principles, became effective in 1993. Because Turkey is a candidate for European Union (EU), the EIA Regulation has been changed due to the EU compliance procedure, and its latest version became valid in 2008. This study aims to emphasize The EIA system in Turkey to supervise the efficiency of this procedure and point the success level. In the introduction part, general EIA concept, its importance, and some notations are mentioned. Following that, the legislation, which builds the EIA system, has been analyzed starting from the 1982 Turkish Constitution. Then, the legislation rules are explained due to the basic steps of the EIA procedure. In order to shed light upon the application, the EIA final decisions given until today, the results, and their distributions to the industries are assessed. In the final part of the study, a SWOT analysis is made to mention the weaknesses, strengths, opportunities, and threats of the EIA system in Turkey.
Kinetic damping in the spectra of the spherical impedance probe
NASA Astrophysics Data System (ADS)
Oberrath, J.
2018-04-01
The impedance probe is a measurement device to measure plasma parameters, such as electron density. It consists of one electrode connected to a network analyzer via a coaxial cable and is immersed into a plasma. A bias potential superposed with an alternating potential is applied to the electrode and the response of the plasma is measured. Its dynamical interaction with the plasma in an electrostatic, kinetic description can be modeled in an abstract notation based on functional analytic methods. These methods provide the opportunity to derive a general solution, which is given as the response function of the probe–plasma system. It is defined by the matrix elements of the resolvent of an appropriate dynamical operator. Based on the general solution, a residual damping for vanishing pressure can be predicted and can only be explained by kinetic effects. In this paper, an explicit response function of the spherical impedance probe is derived. Therefore, the resolvent is determined by its algebraic representation based on an expansion in orthogonal basis functions. This allows one to compute an approximated response function and its corresponding spectra. These spectra show additional damping due to kinetic effects and are in good agreement with former kinetically determined spectra.
Hoarea, Karen J; Millsc, Jane; Francis, Karen
2013-01-01
Graduate nurses in general practice became a feature of New Zealand's health care system in 2008 following an expansion of the New Entrant to Practice Programme. General practice in New Zealand comprises general practitioner business owners who employ nursing and administration staff. Practice nurses are an ageing workforce in New Zealand, it is imperative therefore to attract younger nurses into general practice. This paper reports a section of the findings from a constructivist grounded theory study which examines the use of information by practice nurses in New Zealand. Initially data were collected using the ethnographic technique of observation and field notations in one general practice. Theoretical sensitivity to the value of role models was heightened by this first phase of data collection. A total of eleven practice nurses were interviewed from six general practices. One practice nurse agreed to a second interview; five of the interviewees were new graduate nurses and the other six were experienced practice nurses. The grounded theory constructed from this research was reciprocal role modelling which comprises the following three categories, becoming willing, realising potential and becoming a better practitioner. Graduate nurses and experienced practice nurses enter into a relationship of reciprocal role modelling. Becoming willing, the first core category of this grounded theory features three sub-categories: building respectful relationships, proving yourself and discerning decision making which are reported in this paper. Findings from this study may address the reported phenomenon of 'transition shock' of newly graduated nurses in the work place.
ERIC Educational Resources Information Center
Saktanli, S. Cem
2011-01-01
This experimental study was done to see if using computer supported notation and vocalization program for teaching songs instead of using block flute accompanied song teaching has any significant effect on students' singing behavior. The study group is composed of the 5th, 6th and 7th graders of 2008-2009 educational term in T.O.K.I. Yahya Kemal…
Goal Structuring Notation in a Radiation Hardening Assurance Case for COTS-Based Spacecraft
NASA Technical Reports Server (NTRS)
Witulski, A.; Austin, R.; Evans, J.; Mahadevan, N.; Karsai, G.; Sierawski, B.; LaBel, K.; Reed, R.; Schrimpf, R.
2016-01-01
A systematic approach is presented to constructing a radiation assurance case using Goal Structuring Notation (GSN) for spacecraft containing COTS parts. The GSN paradigm is applied to an SRAM single-event upset experiment board designed to fly on a CubeSat in January 2017. A custom software language for development of a GSN assurance case is under development at Vanderbilt. Construction of a radiation assurance case without use of hardened parts or extensive radiation testing is discussed.
Representation of viruses in the remediated PDB archive
Lawson, Catherine L.; Dutta, Shuchismita; Westbrook, John D.; Henrick, Kim; Berman, Helen M.
2008-01-01
A new scheme has been devised to represent viruses and other biological assemblies with regular noncrystallographic symmetry in the Protein Data Bank (PDB). The scheme describes existing and anticipated PDB entries of this type using generalized descriptions of deposited and experimental coordinate frames, symmetry and frame transformations. A simplified notation has been adopted to express the symmetry generation of assemblies from deposited coordinates and matrix operations describing the required point, helical or crystallographic symmetry. Complete correct information for building full assemblies, subassemblies and crystal asymmetric units of all virus entries is now available in the remediated PDB archive. PMID:18645236
A Generalization of Snell’s Law
1990-06-01
Weinstock [Ref. 2:pp. 20-22]. We know that f(x+h) - f(x) = f’(x)h + higher order terms in h. We apply this to our simplest variational problem by considering...higher order terms . We also define 6J[h] to be the first variation : 8J[h] =f’b (Fy h + Fyh ’)& Setting the first variation equal to zero, and integrating...tC.’~.’’ 82 16. SUPPLEMENTARY NOTATION o r-’ ~ A I~ ~rt~i ra -Ir C’t t.t ) o 17, COSATI CODES 18, SyBJECT TERMS (Continue on reverse if necessary
Data Acquisition and Analysis for Camouflage Design
1981-04-01
were clustered to produce a facsimile of the original scene in 39 49 or 5 average representative colors in CIELAB notation with spectral reflectance...result of the Euclidean clustering or averaging carried out in 1976 CIELAB color space. The size and shape of these domains, along with color, provide...Reflectance Calibration .... ...... 49 Figure O-i CIE 1976 (L*a*b*) Uniform Color Coordinate System (ClELAO) 53 Figure B-2 CIELAB Clustering
Integrated Magneto-Optical Devices for On-Chip Photonic Systems
2017-09-01
reprints for Governmental purposes notwithstanding any copyright notation herein. The views and conclusions contained herein are those of the authors and...Laboratory (AFRL) and the Defense Advanced Research Agency (DARPA) or the U.S. Government. Report contains color . 14. ABSTRACT The objective of this program...Upper Panel: Top- view Optical Micrograph of the First Generation Fabricated Isolator Device and Lower Panel: Layout of MZI and Ring Resonator
The development of a reliable amateur boxing performance analysis template.
Thomson, Edward; Lamb, Kevin; Nicholas, Ceri
2013-01-01
The aim of this study was to devise a valid performance analysis system for the assessment of the movement characteristics associated with competitive amateur boxing and assess its reliability using analysts of varying experience of the sport and performance analysis. Key performance indicators to characterise the demands of an amateur contest (offensive, defensive and feinting) were developed and notated using a computerised notational analysis system. Data were subjected to intra- and inter-observer reliability assessment using median sign tests and calculating the proportion of agreement within predetermined limits of error. For all performance indicators, intra-observer reliability revealed non-significant differences between observations (P > 0.05) and high agreement was established (80-100%) regardless of whether exact or the reference value of ±1 was applied. Inter-observer reliability was less impressive for both analysts (amateur boxer and experienced analyst), with the proportion of agreement ranging from 33-100%. Nonetheless, there was no systematic bias between observations for any indicator (P > 0.05), and the proportion of agreement within the reference range (±1) was 100%. A reliable performance analysis template has been developed for the assessment of amateur boxing performance and is available for use by researchers, coaches and athletes to classify and quantify the movement characteristics of amateur boxing.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1998-01-01
This decision document presents the selected remedial action for Site 5 Landfill Contents and Surface Soil at the Allegany Ballistics Laboratory (ABL), Rocket Center, West Virginia. The major components of the selected remedy are: Deed notation along with property use and limited access restrictions; Installation of a composite CAP-GCL and FMC; Installation of a drainage layer utilizing a geonet; Installation of a passive landfill gas (LFG) venting system; Revegetation of the capped area; Installation of perimeter drainage system; and Post-closure requirements.
QuantumOptics.jl: A Julia framework for simulating open quantum systems
NASA Astrophysics Data System (ADS)
Krämer, Sebastian; Plankensteiner, David; Ostermann, Laurin; Ritsch, Helmut
2018-06-01
We present an open source computational framework geared towards the efficient numerical investigation of open quantum systems written in the Julia programming language. Built exclusively in Julia and based on standard quantum optics notation, the toolbox offers speed comparable to low-level statically typed languages, without compromising on the accessibility and code readability found in dynamic languages. After introducing the framework, we highlight its features and showcase implementations of generic quantum models. Finally, we compare its usability and performance to two well-established and widely used numerical quantum libraries.
The syntax of DRAGOON: Evaluation and recommendations
NASA Technical Reports Server (NTRS)
Holloway, C. Michael
1992-01-01
Several different ways to add linguistic support for object-oriented programming to the Ada programming language have been proposed and developed in recent years. The Distributable Reusable Ada Generated from an Object-Oriented Notation (DRAGOON) language is one such Ada extension. The DRAGOON syntax is described for classes, objects, and inheritance, and the syntax is evaluated against the following five criteria: readability, writeability, lack of ambiguity, ease of translation, and consistency with existing Ada syntax. The evaluation reveals several deficiencies in the notation. A revised syntax that corrects these deficiencies is proposed.
An implementation and analysis of the Abstract Syntax Notation One and the basic encoding rules
NASA Technical Reports Server (NTRS)
Harvey, James D.; Weaver, Alfred C.
1990-01-01
The details of abstract syntax notation one standard (ASN.1) and the basic encoding rules standard (BER) that collectively solve the problem of data transfer across incompatible host environments are presented, and a compiler that was built to automate their use is described. Experiences with this compiler are also discussed which provide a quantitative analysis of the performance costs associated with the application of these standards. An evaluation is offered as to how well suited ASN.1 and BER are in solving the common data representation problem.
Factor Analysis for Spectral Reconnaissance and Situational Understanding
2016-07-11
Number: Xiao Fu 0.40 0.40 1 Sub Contractors (DD882) Names of Faculty Supported Names of Under Graduate students supported Names of Personnel receiving...stationary point of Problem (10). The proof is as follows. For notational convenience, let X = [C, HT , (D′)T ], w = [w1, . . . , wK ] T , and denote g(X,w...10). The proof is as follows. For notational convenience, let X = [C, HT , (D′)T ], w = [w1, . . . , wK ] T , and denote g(X,w) = h(X) + λ K ∑ k=1
Qualitative dynamics semantics for SBGN process description.
Rougny, Adrien; Froidevaux, Christine; Calzone, Laurence; Paulevé, Loïc
2016-06-16
Qualitative dynamics semantics provide a coarse-grain modeling of networks dynamics by abstracting away kinetic parameters. They allow to capture general features of systems dynamics, such as attractors or reachability properties, for which scalable analyses exist. The Systems Biology Graphical Notation Process Description language (SBGN-PD) has become a standard to represent reaction networks. However, no qualitative dynamics semantics taking into account all the main features available in SBGN-PD had been proposed so far. We propose two qualitative dynamics semantics for SBGN-PD reaction networks, namely the general semantics and the stories semantics, that we formalize using asynchronous automata networks. While the general semantics extends standard Boolean semantics of reaction networks by taking into account all the main features of SBGN-PD, the stories semantics allows to model several molecules of a network by a unique variable. The obtained qualitative models can be checked against dynamical properties and therefore validated with respect to biological knowledge. We apply our framework to reason on the qualitative dynamics of a large network (more than 200 nodes) modeling the regulation of the cell cycle by RB/E2F. The proposed semantics provide a direct formalization of SBGN-PD networks in dynamical qualitative models that can be further analyzed using standard tools for discrete models. The dynamics in stories semantics have a lower dimension than the general one and prune multiple behaviors (which can be considered as spurious) by enforcing the mutual exclusiveness between the activity of different nodes of a same story. Overall, the qualitative semantics for SBGN-PD allow to capture efficiently important dynamical features of reaction network models and can be exploited to further refine them.
Timmis, J; Alden, K; Andrews, P; Clark, E; Nellis, A; Naylor, B; Coles, M; Kaye, P
2017-03-01
This tutorial promotes good practice for exploring the rationale of systems pharmacology models. A safety systems engineering inspired notation approach provides much needed rigor and transparency in development and application of models for therapeutic discovery and design of intervention strategies. Structured arguments over a model's development, underpinning biological knowledge, and analyses of model behaviors are constructed to determine the confidence that a model is fit for the purpose for which it will be applied. © 2016 The Authors CPT: Pharmacometrics & Systems Pharmacology published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.
The Effects of Elevator Rate Limiting and Stick Dynamics on Longitudinal Pilot-Induced Oscillations
1997-03-01
systems) were modeled as follows: 1 _ 0.1251Ks in / lb Fe, [0.6 K, , 26 K,] The equation is written in shorthand notation where: [,co] = (S2 + 2 o(s + con2... equation : (5,. , 0.125/K , in / lb Fe [0.6K,, 26K,,] where [c0n] (S2 + 2 (ons + (0n2) (a)= (s + a) The nominal stick, feel system 1, had a damping...System Description The HAVE GRIP stick dynamics (feel system) were modeled by the following equation : _es_ O.12 5 K s in / lb Fes [0.6, 26K j,] The
NASA Technical Reports Server (NTRS)
Shapiro, Bruce E.; Levchenko, Andre; Meyerowitz, Elliot M.; Wold, Barbara J.; Mjolsness, Eric D.
2003-01-01
Cellerator describes single and multi-cellular signal transduction networks (STN) with a compact, optionally palette-driven, arrow-based notation to represent biochemical reactions and transcriptional activation. Multi-compartment systems are represented as graphs with STNs embedded in each node. Interactions include mass-action, enzymatic, allosteric and connectionist models. Reactions are translated into differential equations and can be solved numerically to generate predictive time courses or output as systems of equations that can be read by other programs. Cellerator simulations are fully extensible and portable to any operating system that supports Mathematica, and can be indefinitely nested within larger data structures to produce highly scaleable models.
Integrated Software Development System/Higher Order Software Conceptual Description (ISDS/HOS)
1976-11-01
Structured Flowchart Conventions 270 6.3.5.3 Design Diagram Notation 273 xii HIGHER ORDER SOFTWARE, INC. 843 MASSACHUSETTS AVENUE. CAMBRIDGE, MASSACHUSETTS...associated with the process steps. They also reference other HIPO diagrams as well an non-HIPO documentation such as flowcharts or decision tables of...syntax that is easy to learn and must provide the novice with some prompting to help him avoid classic beginner errors. Desirable editing capabilities
Information Security Considerations for Applications Using Apache Accumulo
2014-09-01
Distributed File System INSCOM United States Army Intelligence and Security Command JPA Java Persistence API JSON JavaScript Object Notation MAC Mandatory... MySQL [13]. BigTable can process 20 petabytes per day [14]. High degree of scalability on commodity hardware. NoSQL databases do not rely on highly...manipulation in relational databases. NoSQL databases each have a unique programming interface that uses a lower level procedural language (e.g., Java
Scheduling and Coordination of Multiple Dynamic Systems.
1979-12-01
Lemna 9. For C (.) defined in (39), .im C (D) -C (D ) exists V DE(.,D) (42) D-D and him4 C(D) C*(D+) exists V DE[D,D). (43) D-D Proof. For any DEi(,D] a...0[t0 ,1 ] where -to - [t,..., tK ’ (151) With this minor abuse of notation, the gradient of C[(t,V1 is to be K found with respect to t ER This
Energy Decay and Boundary Control for Distributed Parameter Systems with Viscoelastic Damping
1989-07-24
for the evolution variational 2 inequality for a rigid-visco-plastic (Bingham) fluid [4, 11-13J. Other work involved numerical and theoretical analysis...dimensional parabolic -elliptic interface problem, submitted to Quart. Appl. Math. 16. W. Desch and R. K. Miller, Exponential Stabilization of Volterra ...17 16. SUPPLEMENTARY NOTATION 17, COSATI CODES 18. SUBJECT TERMS (Continue an revemu of necessay and kdeftOi by block number) FIELD IGROUP ISUB-GROUP
NASA Astrophysics Data System (ADS)
Matuk, Camillia Faye
Visual representations are central to expert scientific thinking. Meanwhile, novices tend toward narrative conceptions of scientific phenomena. Until recently, however, relationships between visual design, narrative thinking, and their impacts on learning science have only been theoretically pursued. This dissertation first synthesizes different disciplinary perspectives, then offers a mixed-methods investigation into interpretations of scientific representations. Finally, it considers design issues associated with narrative and visual imagery, and explores the possibilities of a pedagogical notation to scaffold the understanding of a standard scientific notation. Throughout, I distinguish two categories of visual media by their relation to narrative: Narrative visual media, which convey content via narrative structure, and Conceptual visual media, which convey states of relationships among objects. Given the role of narrative in framing conceptions of scientific phenomena and perceptions of its representations, I suggest that novices are especially prone to construe both kinds of media in narrative terms. To illustrate, I first describe how novices make meaning of the science conveyed in narrative visual media. Vignettes of an undergraduate student's interpretation of a cartoon about natural selection; and of four 13-year olds' readings of a comic book about human papillomavirus infection, together demonstrate conditions under which designed visual narrative elements facilitate or hinder understanding. I next consider the interpretation of conceptual visual media with an example of an expert notation from evolutionary biology, the cladogram. By combining clinical interview methods with experimental design, I show how undergraduate students' narrative theories of evolution frame perceptions of the diagram (Study 1); I demonstrate the flexibility of symbolic meaning, both with the content assumed (Study 2A), and with alternate manners of presenting the diagram (Study 2B); finally, I show the effects of content assumptions on the diagrams students invent of phylogenetic data (Study 3A), and how first inventing a diagram influences later interpretations of the standard notation (Study 3B). Lastly, I describe the prototype design and pilot test of an interactive diagram to scaffold biology students' understanding of this expert scientific notation. Insights from this dissertation inform the design of more pedagogically useful representations that might support students' developing fluency with expert scientific representations.
Population Control of Self-Replicating Systems: Option C
NASA Technical Reports Server (NTRS)
Mccord, R. L.
1983-01-01
From the conception and development of the theory of self-replicating automata by John von Neumann, others have expanded on his theories. In 1980, Georg von Tiesenhausen and Wesley A. Darbro developed a report which is a "first' in presenting the theories in a conceptualized engineering setting. In that report several options involving self-replicating systems are presented. One of the options allows each primary to generate n replicas, one in each sequential time frame after its own generation. Each replica is limited to a maximum of m ancestors. This study involves determining the state vector of the replicas in an efficient manner. The problem is cast in matrix notation, where F = fij is a non-diagonalizable matrix. Any element fij represents the number of elements of type j = (c,d) in time frame k+1 generated from type i = (a,b) in time frame k. It is then shown that the state vector is: bar F(k)=bar F (non-zero) X F sub K = bar F (non-zero) xmx J sub kx m sub-1 where J is a matrix in Jordan form having the same eigenvalues as F. M is a matrix composed of the eigenvectors and the generalized eigenvectors of F.
Ground-State of the Bose-Hubbard Model
NASA Astrophysics Data System (ADS)
Mancini, J. D.; Fessatidis, V.; Bowen, S. P.; Murawski, R. K.; Maly, J.
The Bose-Hubbard Model represents a s simple theoretical model to describe the physics of interacting Boson systems. In particular it has proved to be an effective description of a number of physical systems such as arrays of Josephson arrays as well as dilute alkali gases in optical lattices. Here we wish to study the ground-state of this system using two disparate but related moments calculational schemes: the Lanczos (tridiagonal) method as well as a Generalized moments approach. The Hamiltonian to be studied is given by (in second-quantized notation): H = - t ∑ < i , j > bi†bj +U/2 ∑ ini
NASA Technical Reports Server (NTRS)
Geddes, K. O.
1977-01-01
If a linear ordinary differential equation with polynomial coefficients is converted into integrated form then the formal substitution of a Chebyshev series leads to recurrence equations defining the Chebyshev coefficients of the solution function. An explicit formula is presented for the polynomial coefficients of the integrated form in terms of the polynomial coefficients of the differential form. The symmetries arising from multiplication and integration of Chebyshev polynomials are exploited in deriving a general recurrence equation from which can be derived all of the linear equations defining the Chebyshev coefficients. Procedures for deriving the general recurrence equation are specified in a precise algorithmic notation suitable for translation into any of the languages for symbolic computation. The method is algebraic and it can therefore be applied to differential equations containing indeterminates.
Observations Of General Learning Patterns In An Upper-Level Thermal Physics Course
NASA Astrophysics Data System (ADS)
Meltzer, David E.
2009-11-01
I discuss some observations from using interactive-engagement instructional methods in an upper-level thermal physics course over a two-year period. From the standpoint of the subject matter knowledge of the upper-level students, there was a striking persistence of common learning difficulties previously observed in students enrolled in the introductory course, accompanied, however, by some notable contrasts between the groups. More broadly, I comment on comparisons and contrasts regarding general pedagogical issues among different student sub-populations, for example: differences in the receptivity of lower- and upper-level students to diagrammatic representations; varying receptivity to tutorial-style instructional approach within the upper-level population; and contrasting approaches to learning among physics and engineering sub-populations in the upper-level course with regard to use of symbolic notation, mathematical equations, and readiness to employ verbal explanations.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zemach, Charles; Kurien, Susan
These notes present an account of the Local Wave Vector (LWV) model of a turbulent flow defined throughout physical space. The previously-developed Local Wave Number (LWN) model is taken as a point of departure. Some general properties of turbulent fields and appropriate notation are given first. The LWV model is presently restricted to incompressible flows and the incompressibility assumption is introduced at an early point in the discussion. The assumption that the turbulence is homogeneous is also introduced early on. This assumption can be relaxed by generalizing the space diffusion terms of LWN, but the present discussion is focused onmore » a modeling of homogeneous turbulence.« less
Loya, Salvador Rodriguez; Kawamoto, Kensaku; Chatwin, Chris; Huser, Vojtech
2017-01-01
The use of a service-oriented architecture (SOA) has been identified as a promising approach for improving health care by facilitating reliable clinical decision support (CDS). A review of the literature through October 2013 identified 44 articles on this topic. The review suggests that SOA related technologies such as Business Process Model and Notation (BPMN) and Service Component Architecture (SCA) have not been generally adopted to impact health IT systems’ performance for better care solutions. Additionally, technologies such as Enterprise Service Bus (ESB) and architectural approaches like Service Choreography have not been generally exploited among researchers and developers. Based on the experience of other industries and our observation of the evolution of SOA, we found that the greater use of these approaches have the potential to significantly impact SOA implementations for CDS PMID:25325996
Optical systolic array processor using residue arithmetic
NASA Technical Reports Server (NTRS)
Jackson, J.; Casasent, D.
1983-01-01
The use of residue arithmetic to increase the accuracy and reduce the dynamic range requirements of optical matrix-vector processors is evaluated. It is determined that matrix-vector operations and iterative algorithms can be performed totally in residue notation. A new parallel residue quantizer circuit is developed which significantly improves the performance of the systolic array feedback processor. Results are presented of a computer simulation of this system used to solve a set of three simultaneous equations.
Direct and Inverse Scattering Problem Associated with the Elliptic Sinh-Gordon Equation
1989-11-14
the simple matter of an ambiguity in the quantization of two dimensional Hamiltonian systems, a problem that is easily handled. Our notation is as...siderable evidence has been found in support of a dark- matter fluctuation equations on a background satisfying an expansion hypothesis: suppose the... matter that does porate the case in which one of the fluids is a photon fluid. Of not interact directly with ordinary matter and in particular with
Role of Interfaces and Interphases in the Evolution Mechanics of Material Systems
1992-03-26
K. REIFSNIDER, W. STINCHCOMB, D. DILLARD, R. SWAIN, K. JAYARAMAN, Y. CHlANG J. LESKO, M. ELAHI, Z. GAO, A. RAZVAN Nlatcrials Response Group 92- 12953...1/91 1 26 March 1992 SUPPLEMENTARY NOTATION COSATI CODES 18. SUBJECT TERMS (Continue on reverse if necessary and identify by block number) FIELD GROUP ...SUB- GROUP ABSTRACT (Continue on reverse if necessary and identify by block number) This final report summarizes the activities conducted under this
NASA Astrophysics Data System (ADS)
Tonucci, R. J.; Jacobsen, S. M.; Yen, W. M.
1990-10-01
Using a tunable narrow-band infrared laser, we demonstrate for the first time infrared-fluorescnece line narrowing in the system Ni 2+:MgF 2. High-resolution emission spectra were obtained by pumping the lowest spin-orbit component B 3 ( 3T 2g) (orthorhombic notation with octahedral notation in parentheses) of the 3T 2g multiplet and observing the B 3( 3T 2g)→B 1, A, B 2( 3A 2g) luminescent transitions at low temperature. By tuning the narrow-band laser over the B 3( 3T 2g) band, resonant and non-resonant fluorescence were obtained which narrowed with respect to the inhomogeneously broadened profile, and additional lines were observed. The spectra can be understood in terms of a simultaneous excitation of two different subsets of Ni 2+ ions which have their B 2( 3A 2g)→B 3( 3T 2g) and A( 3A 2g)→B 3( 3T 2g) transitions in resonance with the laser. The A( 3A 2g) and B 1( 3A 2g) spin-orbit components of the ground-state multiplet lie 1.9 cm -1 and 6.5 cm -1 above the B 2( 3A 2g) ground state, respectively, at 2 K.
A Flexible Statechart-to-Model-Checker Translator
NASA Technical Reports Server (NTRS)
Rouquette, Nicolas; Dunphy, Julia; Feather, Martin S.
2000-01-01
Many current-day software design tools offer some variant of statechart notation for system specification. We, like others, have built an automatic translator from (a subset of) statecharts to a model checker, for use to validate behavioral requirements. Our translator is designed to be flexible. This allows us to quickly adjust the translator to variants of statechart semantics, including problem-specific notational conventions that designers employ. Our system demonstration will be of interest to the following two communities: (1) Potential end-users: Our demonstration will show translation from statecharts created in a commercial UML tool (Rational Rose) to Promela, the input language of Holzmann's model checker SPIN. The translation is accomplished automatically. To accommodate the major variants of statechart semantics, our tool offers user-selectable choices among semantic alternatives. Options for customized semantic variants are also made available. The net result is an easy-to-use tool that operates on a wide range of statechart diagrams to automate the pathway to model-checking input. (2) Other researchers: Our translator embodies, in one tool, ideas and approaches drawn from several sources. Solutions to the major challenges of statechart-to-model-checker translation (e.g., determining which transition(s) will fire, handling of concurrent activities) are retired in a uniform, fully mechanized, setting. The way in which the underlying architecture of the translator itself facilitates flexible and customizable translation will also be evident.
Interruption as a test of the user-computer interface
NASA Technical Reports Server (NTRS)
Kreifeldt, J. G.; Mccarthy, M. E.
1981-01-01
In order to study the effects different logic systems might have on interrupted operation, an algebraic calculator and a reverse polish notation calculator were compared when trained users were interrupted during problem entry. The RPN calculator showed markedly superior resistance to interruption effects compared to the AN calculator although no significant differences were found when the users were not interrupted. Causes and possible remedies for interruption effects are speculated. It is proposed that because interruption is such a common occurrence, it be incorporated into comparative evaluation tests of different logic system and control/display system and that interruption resistance be adopted as a specific design criteria for such design.
Methodology for automating software systems
NASA Technical Reports Server (NTRS)
Moseley, Warren
1990-01-01
Applying ITS technology to the shuttle diagnostics would not require the rigor of the Petri Net representation, however it is important in providing the animated simulated portion of the interface and the demands placed on the system to support the training aspects to have a homogeneous and consistent underlying knowledge representation. By keeping the diagnostic rule base, the hardware description, the software description, user profiles, desired behavioral knowledge, and the user interface in the same notation, it is possible to reason about the all of the properties of petri nets, on any selected portion of the simulation. This reasoning provides foundation for utilization of intelligent tutoring systems technology.
Aspect-Oriented Programming is Quantification and Implicit Invocation
NASA Technical Reports Server (NTRS)
Filman, Robert E.; Friedman, Daniel P.; Koga, Dennis (Technical Monitor)
2001-01-01
We propose that the distinguishing characteristic of Aspect-Oriented Programming (AOP) languages is that they allow programming by making quantified programmatic assertions over programs that lack local notation indicating the invocation of these assertions. This suggests that AOP systems can be analyzed with respect to three critical dimensions: the kinds of quantifications allowed, the nature of the interactions that can be asserted, and the mechanism for combining base-level actions with asserted actions. Consequences of this perspective are the recognition that certain systems are not AOP and that some mechanisms are metabolism: they are sufficiently expressive to allow straightforwardly programming an AOP system within them.
Li, Shasha; Nie, Hongchao; Lu, Xudong; Duan, Huilong
2015-02-01
Integration of heterogeneous systems is the key to hospital information construction due to complexity of the healthcare environment. Currently, during the process of healthcare information system integration, people participating in integration project usually communicate by free-format document, which impairs the efficiency and adaptability of integration. A method utilizing business process model and notation (BPMN) to model integration requirement and automatically transforming it to executable integration configuration was proposed in this paper. Based on the method, a tool was developed to model integration requirement and transform it to integration configuration. In addition, an integration case in radiology scenario was used to verify the method.
Monitoring Hitting Load in Tennis Using Inertial Sensors and Machine Learning.
Whiteside, David; Cant, Olivia; Connolly, Molly; Reid, Machar
2017-10-01
Quantifying external workload is fundamental to training prescription in sport. In tennis, global positioning data are imprecise and fail to capture hitting loads. The current gold standard (manual notation) is time intensive and often not possible given players' heavy travel schedules. To develop an automated stroke-classification system to help quantify hitting load in tennis. Nineteen athletes wore an inertial measurement unit (IMU) on their wrist during 66 video-recorded training sessions. Video footage was manually notated such that known shot type (serve, rally forehand, slice forehand, forehand volley, rally backhand, slice backhand, backhand volley, smash, or false positive) was associated with the corresponding IMU data for 28,582 shots. Six types of machine-learning models were then constructed to classify true shot type from the IMU signals. Across 10-fold cross-validation, a cubic-kernel support vector machine classified binned shots (overhead, forehand, or backhand) with an accuracy of 97.4%. A second cubic-kernel support vector machine achieved 93.2% accuracy when classifying all 9 shot types. With a view to monitoring external load, the combination of miniature inertial sensors and machine learning offers a practical and automated method of quantifying shot counts and discriminating shot types in elite tennis players.
Progress in recognizing typeset mathematics
NASA Astrophysics Data System (ADS)
Fateman, Richard J.; Tokuyasu, Taku A.
1996-03-01
Printed mathematics has a number of features which distinguish it from conventional text. These include structure in two dimensions (fractions, exponents, limits), frequent font changes, symbols with variable shape (quotient bars), and substantially differing notational conventions from source to source. When compounded with more generic problems such as noise and merged or broken characters, printed mathematics offers a challenging arena for recognition. Our project was initially driven by the goal of scanning and parsing some 5,000 pages of elaborate mathematics (tables of definite integrals). While our prototype system demonstrates success on translating noise-free typeset equations into Lisp expressions appropriate for further processing, a more semantic top-down approach appears necessary for higher levels of performance. Such an approach may benefit the incorporation of these programs into a more general document processing viewpoint. We intend to release to the public our somewhat refined prototypes as utility programs in the hope that they will be of general use in the construction of custom OCR packages. These utilities are quite fast even as originally prototyped in Lisp, where they may be of particular interest to those working on 'intelligent' optical processing. Some routines have been re-written in C++ as well. Additional programs providing formula recognition and parsing also form a part of this system. It is important however to realize that distinct conflicting grammars are needed to cover variations in contemporary and historical typesetting, and thus a single simple solution is not possible.
Representation of visual symbols in the visual word processing network.
Muayqil, Taim; Davies-Thompson, Jodie; Barton, Jason J S
2015-03-01
Previous studies have shown that word processing involves a predominantly left-sided occipitotemporal network. Words are a form of symbolic representation, in that they are arbitrary perceptual stimuli that represent other objects, actions or concepts. Lesions of parts of the visual word processing network can cause alexia, which can be associated with difficulty processing other types of symbols such as musical notation or road signs. We investigated whether components of the visual word processing network were also activated by other types of symbols. In 16 music-literate subjects, we defined the visual word network using fMRI and examined responses to four symbolic categories: visual words, musical notation, instructive symbols (e.g. traffic signs), and flags and logos. For each category we compared responses not only to scrambled stimuli, but also to similar stimuli that lacked symbolic meaning. The left visual word form area and a homologous right fusiform region responded similarly to all four categories, but equally to both symbolic and non-symbolic equivalents. Greater response to symbolic than non-symbolic stimuli occurred only in the left inferior frontal and middle temporal gyri, but only for words, and in the case of the left inferior frontal gyri, also for musical notation. A whole-brain analysis comparing symbolic versus non-symbolic stimuli revealed a distributed network of inferior temporooccipital and parietal regions that differed for different symbols. The fusiform gyri are involved in processing the form of many symbolic stimuli, but not specifically for stimuli with symbolic content. Selectivity for stimuli with symbolic content only emerges in the visual word network at the level of the middle temporal and inferior frontal gyri, but is specific for words and musical notation. Copyright © 2015 Elsevier Ltd. All rights reserved.
ERIC Educational Resources Information Center
Anderson, R. D.; And Others
This is part one of a two-part SMSG mathematics text for junior high school students. Key ideas emphasized are structure of arithmetic from an algebraic viewpoint, the real number system as a progressing development, and metric and non-metric relations in geometry. Chapter topics include number line and coordinates, equations, scientific notation,…
Laser-Based Diagnostics for Transient Species in Hydrocarbon Flames
1989-12-01
Year , Monek Daey) IS. PAGE COUNT PniIFROM ll/R TO--UR 1 90R 236 16. SUPPLEMENTARY NOTATION 17. COSATI CODES 1S. SUBJECT TERMS (Comnwiu on rewew if...chemical mechanism is to apply species specific diagnostic methods directly to the combustion system of interest. In the past , most optical diagnostic...of the two important radicals HCO and C2H by LIF or absorption methods is several years in the future and will require futher basic studies
Three Object-Oriented enhancement for EPICS
NASA Astrophysics Data System (ADS)
Osberg, E. A.; Dohan, D. A.; Richter, R.; Biggs, R.; Chillara, K.; Wade, D.; Bossom, J.
1994-12-01
In line with our group's intention of producing software using, where possible, Object-Oriented methodologies and techniques in the development of RF control systems, we have undertaken three projects to enhance the EPICS software environment. Two of the projects involve interfaces to EPICs Channel Access from Object-Oriented languages. The third is an enhancement to the EPICS State Notation Language to better support the Shlaer-Mellor Object-Oriented Analysis and Design Methodology. This paper discusses the motivation, approaches, results and future directions of these three projects.
Kinematical Relativistic Corrections for Earth’s Rotation Parameters
2000-03-01
the same notation as in Brumberg et al.(1996) and Brumberg (1997a), i.e. B { barycentric, G { geocentric, V { VLBI, C { ecliptical , Q { equatorial, D...Very approximately PQ = E; PC = 0 @ 1 0 00 cos " sin " 0 sin " cos " 1 A ; (2:2) where E stands for the unit matrix and " is the mean obliquity . This...the Euler angles and their TCG derivatives relating the ITRS and the geocentric ecliptical reference system GRSC in dynamical and kinematical versions
Batch Proving and Proof Scripting in PVS
NASA Technical Reports Server (NTRS)
Munoz, Cesar A.
2007-01-01
The batch execution modes of PVS are powerful, but highly technical, features of the system that are mostly accessible to expert users. This paper presents a PVS tool, called ProofLite, that extends the theorem prover interface with a batch proving utility and a proof scripting notation. ProofLite enables a semi-literate proving style where specification and proof scripts reside in the same file. The goal of ProofLite is to provide batch proving and proof scripting capabilities to regular, non-expert, users of PVS.
1991-05-31
benchmarks ............ .... . .. .. . . .. 220 Appendix G : Source code of the Aquarius Prolog compiler ........ . 224 Chapter I Introduction "You’re given...notation, a tool that is used throughout the compiler’s implementation. Appendix F lists the source code of the C and Prolog benchmarks. Appendix G lists the...source code of the compilcr. 5 "- standard form Prolog / a-sfomadon / head umrvln Convert to tmeikernel Prol g vrans~fonaon 1symbolic execution
NASA Technical Reports Server (NTRS)
Denney, Ewen; Power, John
2003-01-01
We introduce a hierarchical notion of formal proof, useful in the implementation of theorem provers, which we call highproofs. Two alternative definitions are given, motivated by existing notations used in theorem proving research. We define transformations between these two forms of hiproof, develop notions of underlying proof, and give a suitable definition of refinement in order to model incremental proof development. We show that our transformations preserve both underlying proofs and refinement. The relationship of our theory to existing theorem proving systems is discussed, as is its future extension.
Kindlmann, Gordon; Chiw, Charisee; Seltzer, Nicholas; Samuels, Lamont; Reppy, John
2016-01-01
Many algorithms for scientific visualization and image analysis are rooted in the world of continuous scalar, vector, and tensor fields, but are programmed in low-level languages and libraries that obscure their mathematical foundations. Diderot is a parallel domain-specific language that is designed to bridge this semantic gap by providing the programmer with a high-level, mathematical programming notation that allows direct expression of mathematical concepts in code. Furthermore, Diderot provides parallel performance that takes advantage of modern multicore processors and GPUs. The high-level notation allows a concise and natural expression of the algorithms and the parallelism allows efficient execution on real-world datasets.
Music, Mechanism, and the “Sonic Turn” in Physical Diagnosis
Pesic, Peter
2016-01-01
The sonic diagnostic techniques of percussion and mediate auscultation advocated by Leopold von Auenbrugger and R. T. H. Laennec developed within larger musical contexts of practice, notation, and epistemology. Earlier, François-Nicolas Marquet proposed a musical notation of pulse that connected felt pulsation with heard music. Though contemporary vitalists rejected Marquet's work, mechanists such as Albrecht von Haller included it into the larger discourse about the physiological manifestations of bodily fluids and fibers. Educated in that mechanistic physiology, Auenbrugger used musical vocabulary to present his work on thoracic percussion; Laennec's musical experience shaped his exploration of the new timbres involved in mediate auscultation. PMID:26349757
Modeling and simulation of offshore wind farm O&M processes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Joschko, Philip, E-mail: joschko@informatik.uni-hamburg.de; Widok, Andi H., E-mail: a.widok@htw-berlin.de; Appel, Susanne, E-mail: susanne.appel@hs-bremen.de
2015-04-15
This paper describes a holistic approach to operation and maintenance (O&M) processes in the domain of offshore wind farm power generation. The acquisition and process visualization is followed by a risk analysis of all relevant processes. Hereafter, a tool was designed, which is able to model the defined processes in a BPMN 2.0 notation, as well as connect and simulate them. Furthermore, the notation was enriched with new elements, representing other relevant factors that were, to date, only displayable with much higher effort. In that regard a variety of more complex situations were integrated, such as for example new processmore » interactions depending on different weather influences, in which case a stochastic weather generator was combined with the business simulation or other wind farm aspects important to the smooth running of the offshore wind farms. In addition, the choices for different methodologies, such as the simulation framework or the business process notation will be presented and elaborated depending on the impact they had on the development of the approach and the software solution. - Highlights: • Analysis of operation and maintenance processes of offshore wind farms • Process modeling with BPMN 2.0 • Domain-specific simulation tool.« less
Automatic Synthesis of UML Designs from Requirements in an Iterative Process
NASA Technical Reports Server (NTRS)
Schumann, Johann; Whittle, Jon; Clancy, Daniel (Technical Monitor)
2001-01-01
The Unified Modeling Language (UML) is gaining wide popularity for the design of object-oriented systems. UML combines various object-oriented graphical design notations under one common framework. A major factor for the broad acceptance of UML is that it can be conveniently used in a highly iterative, Use Case (or scenario-based) process (although the process is not a part of UML). Here, the (pre-) requirements for the software are specified rather informally as Use Cases and a set of scenarios. A scenario can be seen as an individual trace of a software artifact. Besides first sketches of a class diagram to illustrate the static system breakdown, scenarios are a favorite way of communication with the customer, because scenarios describe concrete interactions between entities and are thus easy to understand. Scenarios with a high level of detail are often expressed as sequence diagrams. Later in the design and implementation stage (elaboration and implementation phases), a design of the system's behavior is often developed as a set of statecharts. From there (and the full-fledged class diagram), actual code development is started. Current commercial UML tools support this phase by providing code generators for class diagrams and statecharts. In practice, it can be observed that the transition from requirements to design to code is a highly iterative process. In this talk, a set of algorithms is presented which perform reasonable synthesis and transformations between different UML notations (sequence diagrams, Object Constraint Language (OCL) constraints, statecharts). More specifically, we will discuss the following transformations: Statechart synthesis, introduction of hierarchy, consistency of modifications, and "design-debugging".
Wavelets and distributed approximating functionals
NASA Astrophysics Data System (ADS)
Wei, G. W.; Kouri, D. J.; Hoffman, D. K.
1998-07-01
A general procedure is proposed for constructing father and mother wavelets that have excellent time-frequency localization and can be used to generate entire wavelet families for use as wavelet transforms. One interesting feature of our father wavelets (scaling functions) is that they belong to a class of generalized delta sequences, which we refer to as distributed approximating functionals (DAFs). We indicate this by the notation wavelet-DAFs. Correspondingly, the mother wavelets generated from these wavelet-DAFs are appropriately called DAF-wavelets. Wavelet-DAFs can be regarded as providing a pointwise (localized) spectral method, which furnishes a bridge between the traditional global methods and local methods for solving partial differential equations. They are shown to provide extremely accurate numerical solutions for a number of nonlinear partial differential equations, including the Korteweg-de Vries (KdV) equation, for which a previous method has encountered difficulties (J. Comput. Phys. 132 (1997) 233).
Tables of Significance Points for the Variance-Weighted Kolmogorov-Smirnov Statistics.
1981-02-19
neN x; 1; ( := 0 for all z Vo0 For the values of a function V: N0 IR we use both notations V(i) and vi " ii Tables of Significance Points for the...satisfying 0 < V0 < 10 and v, < Vi -i ¥i IN,* The following functions define a 4-Sheffer sequence (see (A.12)) for the derivative operator D: d i if x ɘ f(,c...S U(i ) < Ii ¥ Vi l,...,M)IMl 7 i7- 1.2. Recursions. For this section we assume p’ 1 without loss of generality.M With qn-k(x)- x n-k/(n-k)! in (A.13
Universally-Usable Interactive Electronic Physics Instructional And Educational Materials
NASA Astrophysics Data System (ADS)
Gardner, John
2000-03-01
Recent developments of technologies that promote full accessibility of electronic information by future generations of people with print disabilities will be described. ("Print disabilities" include low vision, blindness, and dyslexia.) The guiding philosophy of these developments is that information should be created and transmitted in a form that is as display-independent as possible, and that the user should have maximum freedom over how that information is to be displayed. This philosophy leads to maximum usability by everybody and is, in the long run, the only way to assure truly equal access. Research efforts to be described include access to mathematics and scientific notation and to graphs, tables, charts, diagrams, and general object-oriented graphics.
NASA Technical Reports Server (NTRS)
Tag, I. A.; Lumsdaine, E.
1978-01-01
The general non-linear three-dimensional equation for acoustic potential is derived by using a perturbation technique. The linearized axisymmetric equation is then solved by using a finite element algorithm based on the Galerkin formulation for a harmonic time dependence. The solution is carried out in complex number notation for the acoustic velocity potential. Linear, isoparametric, quadrilateral elements with non-uniform distribution across the duct section are implemented. The resultant global matrix is stored in banded form and solved by using a modified Gauss elimination technique. Sound pressure levels and acoustic velocities are calculated from post element solutions. Different duct geometries are analyzed and compared with experimental results.
NASA Technical Reports Server (NTRS)
Lakin, W. D.
1981-01-01
The use of integrating matrices in solving differential equations associated with rotating beam configurations is examined. In vibration problems, by expressing the equations of motion of the beam in matrix notation, utilizing the integrating matrix as an operator, and applying the boundary conditions, the spatial dependence is removed from the governing partial differential equations and the resulting ordinary differential equations can be cast into standard eigenvalue form. Integrating matrices are derived based on two dimensional rectangular grids with arbitrary grid spacings allowed in one direction. The derivation of higher dimensional integrating matrices is the initial step in the generalization of the integrating matrix methodology to vibration and stability problems involving plates and shells.
Overview of shorthand medical glossary (OMG) study.
Politis, J; Lau, S; Yeoh, J; Brand, C; Russell, D; Liew, D
2015-04-01
Shorthand is commonplace in clinical notation. While many abbreviations are standard and widely accepted, an increasing number are non-standard and/or unrecognisable. We sought to describe the frequency of inappropriate and ambiguous shorthand in discharge summaries. Eighty electronic discharge summaries from the four General Medical Units at the Royal Melbourne Hospital were randomly extracted from the hospital's electronic records. Extraction was stratified by the four units and by the four quarters between July 2012 and June 2013. All abbreviations were assigned into one of four categories according to appropriateness: 1. 'Universally accepted and understood even without context'; 2. 'Understood when in context'; 3. 'Understood but inappropriate and/or ambiguous'; and 4. 'Unknown'. These categories were determined by the authors, which included junior and senior medical staff. The 80 discharge summaries contained 840 different abbreviations used on 6269 occasions. Of all words, 20.1% were abbreviations. Of the 6269 occasions of shorthand, 6.8% were categorised as 'Understood but inappropriate and/or ambiguous' or 'Unknown' (category 3 or 4), equating to 1.4% of all words, and an average of 5.4 words per discharge summary. Abbreviations are common in electronic discharge summaries, occurring at a frequency of one in five words. While the majority of shorthand used seems to be appropriate, the use of inappropriate, ambiguous or unknown shorthand is still frequent. This has implications for safe and effective patient care and highlights the need for better awareness and education regarding use of shorthand in clinical notation. © 2015 Royal Australasian College of Physicians.
Object-oriented integrated approach for the design of scalable ECG systems.
Boskovic, Dusanka; Besic, Ingmar; Avdagic, Zikrija
2009-01-01
The paper presents the implementation of Object-Oriented (OO) integrated approaches to the design of scalable Electro-Cardio-Graph (ECG) Systems. The purpose of this methodology is to preserve real-world structure and relations with the aim to minimize the information loss during the process of modeling, especially for Real-Time (RT) systems. We report on a case study of the design that uses the integration of OO and RT methods and the Unified Modeling Language (UML) standard notation. OO methods identify objects in the real-world domain and use them as fundamental building blocks for the software system. The gained experience based on the strongly defined semantics of the object model is discussed and related problems are analyzed.
Fundamental Principles of Classical Mechanics: a Geometrical Perspectives
NASA Astrophysics Data System (ADS)
Lam, Kai S.
2014-07-01
Classical mechanics is the quantitative study of the laws of motion for oscopic physical systems with mass. The fundamental laws of this subject, known as Newton's Laws of Motion, are expressed in terms of second-order differential equations governing the time evolution of vectors in a so-called configuration space of a system (see Chapter 12). In an elementary setting, these are usually vectors in 3-dimensional Euclidean space, such as position vectors of point particles; but typically they can be vectors in higher dimensional and more abstract spaces. A general knowledge of the mathematical properties of vectors, not only in their most intuitive incarnations as directed arrows in physical space but as elements of abstract linear vector spaces, and those of linear operators (transformations) on vector spaces as well, is then indispensable in laying the groundwork for both the physical and the more advanced mathematical - more precisely topological and geometrical - concepts that will prove to be vital in our subject. In this beginning chapter we will review these properties, and introduce the all-important related notions of dual spaces and tensor products of vector spaces. The notational convention for vectorial and tensorial indices used for the rest of this book (except when otherwise specified) will also be established...
Potential Health Effects Associated with Dermal Exposure to Occupational Chemicals
Anderson, Stacey E; Meade, B Jean
2014-01-01
There are a large number of workers in the United States, spanning a variety of occupational industries and sectors, who are potentially exposed to chemicals that can be absorbed through the skin. Occupational skin exposures can result in numerous diseases that can adversely affect an individual’s health and capacity to perform at work. In general, there are three types of chemical–skin interactions of concern: direct skin effects, immune-mediated skin effects, and systemic effects. While hundreds of chemicals (metals, epoxy and acrylic resins, rubber additives, and chemical intermediates) present in virtually every industry have been identified to cause direct and immune-mediated effects such as contact dermatitis or urticaria, less is known about the number and types of chemicals contributing to systemic effects. In an attempt to raise awareness, skin notation assignments communicate the potential for dermal absorption; however, there is a need for standardization among agencies to communicate an accurate description of occupational hazards. Studies have suggested that exposure to complex mixtures, excessive hand washing, use of hand sanitizers, high frequency of wet work, and environmental or other factors may enhance penetration and stimulate other biological responses altering the outcomes of dermal chemical exposure. Understanding the hazards of dermal exposure is essential for the proper implementation of protective measures to ensure worker safety and health. PMID:25574139
Potential health effects associated with dermal exposure to occupational chemicals.
Anderson, Stacey E; Meade, B Jean
2014-01-01
There are a large number of workers in the United States, spanning a variety of occupational industries and sectors, who are potentially exposed to chemicals that can be absorbed through the skin. Occupational skin exposures can result in numerous diseases that can adversely affect an individual's health and capacity to perform at work. In general, there are three types of chemical-skin interactions of concern: direct skin effects, immune-mediated skin effects, and systemic effects. While hundreds of chemicals (metals, epoxy and acrylic resins, rubber additives, and chemical intermediates) present in virtually every industry have been identified to cause direct and immune-mediated effects such as contact dermatitis or urticaria, less is known about the number and types of chemicals contributing to systemic effects. In an attempt to raise awareness, skin notation assignments communicate the potential for dermal absorption; however, there is a need for standardization among agencies to communicate an accurate description of occupational hazards. Studies have suggested that exposure to complex mixtures, excessive hand washing, use of hand sanitizers, high frequency of wet work, and environmental or other factors may enhance penetration and stimulate other biological responses altering the outcomes of dermal chemical exposure. Understanding the hazards of dermal exposure is essential for the proper implementation of protective measures to ensure worker safety and health.
The dependence of the anisoplanatic Strehl of a compensated beam on the beacon distribution
NASA Astrophysics Data System (ADS)
Stroud, P.
1992-02-01
There are several applications for lasers where the effect of atmospheric turbulence is strong enough to require wavefront compensation, and the compensation can be made by an adaptive optics (AO) system which processes light returned from the target itself. The distribution of the target return light produces limitations to the performance of the AO system. The primary intent of this documentation is to present the new results of an analysis of the anisoplanatic effects arising from target return beacon geometries. It will also lay out the assumptions and steps in the analysis, so that the results can be validated or extended. The intent is to provide a self-consistent notation, simple physical interpretations of the mathematical formulations, and enough detail to reduce the investment of time required to become acquainted or reacquainted with the physics of laser propagation through turbulence, at a level needed to analyze anisoplanatic effects. A general formulation has been developed to calculate the anisoplanatic Strehl of a compensated beam for any beacon distribution and turbulence profile. Numerical calculations are also shown for several beacon geometries and turbulence profiles. The key result is that the spread of the beacon distribution has a much less deleterious effect than does the offset of the beacon centroid from the aimpoint.
Transfer-matrices for series-type microwave antenna circuits. [L-band radiometer
NASA Technical Reports Server (NTRS)
Schmidt, R. F.
1981-01-01
Transfer matrices are developed which permit analysis and computer evaluation of certain series type microwave antenna circuits associated with an L-Band microwave radiometer (LBMR) under investigation at Goddard Space Flight Center. This radiometer is one of several diverse instrument designs to be used for the determination of soil moisture, sea state, salinity, and temperature data. Four port matrix notation is used throughout for the evaluation of LBMR circuits with mismatched couplers and lossy transmission lines. Matrix parameters in examples are predicted on an impedance analysis and an assumption of an array aperture distribution. The notation presented is easily adapted to longer and more varied chains of matrices, and to matrices of larger dimension.
Structured programming: Principles, notation, procedure
NASA Technical Reports Server (NTRS)
JOST
1978-01-01
Structured programs are best represented using a notation which gives a clear representation of the block encapsulation. In this report, a set of symbols which can be used until binding directives are republished is suggested. Structured programming also allows a new method of procedure for design and testing. Programs can be designed top down, that is, they can start at the highest program plane and can penetrate to the lowest plane by step-wise refinements. The testing methodology also is adapted to this procedure. First, the highest program plane is tested, and the programs which are not yet finished in the next lower plane are represented by so-called dummies. They are gradually replaced by the real programs.
Szymaś, J; Gawroński, M
1993-01-01
The composition assumed our experience in creating and using multimedial data base of examination questions and management system, which is used for. This system is implemented on microcomputers compatible with IBM PC and works in network system Net Ware 3.11. The test questions exceeded 2000 until now. The packet consists of the two functionally individual programs: ASSISTANT, which is the administrator for the databases, and EXAMINATOR which is the executive program. This system enables to use text files and add images to each question, which are adjusted to display on standard graphics devices (VGA). Standard format of the notation files enables to elaborate the results in order to estimate the scale of answers and to find correlations between the results.
Towards a Transcription System of Sign Language for 3D Virtual Agents
NASA Astrophysics Data System (ADS)
Do Amaral, Wanessa Machado; de Martino, José Mario
Accessibility is a growing concern in computer science. Since virtual information is mostly presented visually, it may seem that access for deaf people is not an issue. However, for prelingually deaf individuals, those who were deaf since before acquiring and formally learn a language, written information is often of limited accessibility than if presented in signing. Further, for this community, signing is their language of choice, and reading text in a spoken language is akin to using a foreign language. Sign language uses gestures and facial expressions and is widely used by deaf communities. To enabling efficient production of signed content on virtual environment, it is necessary to make written records of signs. Transcription systems have been developed to describe sign languages in written form, but these systems have limitations. Since they were not originally designed with computer animation in mind, in general, the recognition and reproduction of signs in these systems is an easy task only to those who deeply know the system. The aim of this work is to develop a transcription system to provide signed content in virtual environment. To animate a virtual avatar, a transcription system requires explicit enough information, such as movement speed, signs concatenation, sequence of each hold-and-movement and facial expressions, trying to articulate close to reality. Although many important studies in sign languages have been published, the transcription problem remains a challenge. Thus, a notation to describe, store and play signed content in virtual environments offers a multidisciplinary study and research tool, which may help linguistic studies to understand the sign languages structure and grammar.
Effect of formal specifications on program complexity and reliability: An experimental study
NASA Technical Reports Server (NTRS)
Goel, Amrit L.; Sahoo, Swarupa N.
1990-01-01
The results are presented of an experimental study undertaken to assess the improvement in program quality by using formal specifications. Specifications in the Z notation were developed for a simple but realistic antimissile system. These specifications were then used to develop 2 versions in C by 2 programmers. Another set of 3 versions in Ada were independently developed from informal specifications in English. A comparison of the reliability and complexity of the resulting programs suggests the advantages of using formal specifications in terms of number of errors detected and fault avoidance.
Turbulent Flow Validation in the Helios Strand Solver
2014-01-07
usual (̄) notation is omitted for simplicity). The pressure is obtained from the ideal gas equation of state given as: P = (γ−1) [ Et − 1 2 ρ ( u2 + v2...2. SA-RANS System The state vector and flux vectors including those of the SA model equation for three-dimensional flow are explicitly given as: u...number, PrT is the turbulent Prandtl number, and T is the temperature. The ideal gas equation of state , p = ρRT is used to close the equations . IV.A
Application of Modern Control Design Methodologies to a Multi-Segmented Deformable Mirror System
1991-05-23
state matrices, and the state equations are X= Ax + Bu (2.3) y = Cm + Du (2.4) The only dynamics modeled are associated with the six segment phasing...relationship between the L 2 and H2 spaces, the vector H2 norm can be found from the application of Parseval’s Theorem to Equation 3.1, yielding V112...of this minimization problem can be found using Riccati equations {1]. ’With a slight abuse of notation, time domain functions and frequency domain
Representation of viruses in the remediated PDB archive
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lawson, Catherine L., E-mail: cathy.lawson@rutgers.edu; Dutta, Shuchismita; Westbrook, John D.
2008-08-01
A new data model for PDB entries of viruses and other biological assemblies with regular noncrystallographic symmetry is described. A new scheme has been devised to represent viruses and other biological assemblies with regular noncrystallographic symmetry in the Protein Data Bank (PDB). The scheme describes existing and anticipated PDB entries of this type using generalized descriptions of deposited and experimental coordinate frames, symmetry and frame transformations. A simplified notation has been adopted to express the symmetry generation of assemblies from deposited coordinates and matrix operations describing the required point, helical or crystallographic symmetry. Complete correct information for building full assemblies,more » subassemblies and crystal asymmetric units of all virus entries is now available in the remediated PDB archive.« less
Quaternions, Torsion and the Physical Vacuum: Theories of M. Sachs and G. Shipov Compared
NASA Astrophysics Data System (ADS)
Cyganski, David; Page, William S.
Of several developments of unified field theories in the spirit of Einstein's original objective of a fully geometric description of all classical fields as well as quantum mechanics, two are particularly noteworthy. The works of Mendel Sachs and Gennady Shipov stand apart as major life works comprising tens of papers, several monographs and decades of effort. Direct comparison of these theories is hampered however by differences in notation and conceptual view-point. Despite these differences, there are many parallels between the fundamental mathematical structures appearing in each. In this paper we discuss the main tenets of the two approaches and demonstrate that they both give rise to a factorization of the invariant interval of general relativity.
The road plan model: Information model for planning road building activities
NASA Technical Reports Server (NTRS)
Azinhal, Rafaela K.; Moura-Pires, Fernando
1994-01-01
The general building contractor is presented with an information model as an approach for deriving a high-level work plan of construction activities applied to road building. Road construction activities are represented in a Road Plan Model (RPM), which is modeled in the ISO standard STEP/EXPRESS and adopts various concepts from the GARM notation. The integration with the preceding road design stage and the succeeding phase of resource scheduling is discussed within the framework of a Road Construction Model. Construction knowledge is applied to the road design and the terrain model of the surrounding road infrastructure for the instantiation of the RPM. Issues regarding the implementation of a road planner application supporting the RPM are discussed.
SORTEZ: a relational translator for NCBI's ASN.1 database.
Hart, K W; Searls, D B; Overton, G C
1994-07-01
The National Center for Biotechnology Information (NCBI) has created a database collection that includes several protein and nucleic acid sequence databases, a biosequence-specific subset of MEDLINE, as well as value-added information such as links between similar sequences. Information in the NCBI database is modeled in Abstract Syntax Notation 1 (ASN.1) an Open Systems Interconnection protocol designed for the purpose of exchanging structured data between software applications rather than as a data model for database systems. While the NCBI database is distributed with an easy-to-use information retrieval system, ENTREZ, the ASN.1 data model currently lacks an ad hoc query language for general-purpose data access. For that reason, we have developed a software package, SORTEZ, that transforms the ASN.1 database (or other databases with nested data structures) to a relational data model and subsequently to a relational database management system (Sybase) where information can be accessed through the relational query language, SQL. Because the need to transform data from one data model and schema to another arises naturally in several important contexts, including efficient execution of specific applications, access to multiple databases and adaptation to database evolution this work also serves as a practical study of the issues involved in the various stages of database transformation. We show that transformation from the ASN.1 data model to a relational data model can be largely automated, but that schema transformation and data conversion require considerable domain expertise and would greatly benefit from additional support tools.
A New Method for Conceptual Modelling of Information Systems
NASA Astrophysics Data System (ADS)
Gustas, Remigijus; Gustiene, Prima
Service architecture is not necessarily bound to the technical aspects of information system development. It can be defined by using conceptual models that are independent of any implementation technology. Unfortunately, the conventional information system analysis and design methods cover just a part of required modelling notations for engineering of service architectures. They do not provide effective support to maintain semantic integrity between business processes and data. Service orientation is a paradigm that can be applied for conceptual modelling of information systems. The concept of service is rather well understood in different domains. It can be applied equally well for conceptualization of organizational and technical information system components. This chapter concentrates on analysis of the differences between service-oriented modelling and object-oriented modelling. Service-oriented method is used for semantic integration of information system static and dynamic aspects.
DAIDALUS: Detect and Avoid Alerting Logic for Unmanned Systems
NASA Technical Reports Server (NTRS)
Munoz, Cesar; Narkawicz, Anthony; Hagen, George; Upchurch, Jason; Dutle, Aaron; Consiglio, Maria; Chamberlain, James
2015-01-01
This paper presents DAIDALUS (Detect and Avoid Alerting Logic for Unmanned Systems), a reference implementation of a detect and avoid concept intended to support the integration of Unmanned Aircraft Systems into civil airspace. DAIDALUS consists of self-separation and alerting algorithms that provide situational awareness to UAS remote pilots. These algorithms have been formally specified in a mathematical notation and verified for correctness in an interactive theorem prover. The software implementation has been verified against the formal models and validated against multiple stressing cases jointly developed by the US Air Force Research Laboratory, MIT Lincoln Laboratory, and NASA. The DAIDALUS reference implementation is currently under consideration for inclusion in the appendices to the Minimum Operational Performance Standards for Unmanned Aircraft Systems presently being developed by RTCA Special Committee 228.
ERIC Educational Resources Information Center
Wolf, Walter A., Ed.
1978-01-01
Presents teaching notes on the topics of powers of ten notations, physical chemistry projects involving natural products, calorimetry, and solar energy, and learning organic chemistry by playing cards. (SL)
Air Cushion Craft Development. First Revision.
1980-01-01
xix NOTATION ............ ............................... .... xxi ABSTRACT ............ ............................... .i... 1 ...ADMINISTRATIVE INFORMATION ........... ...................... 1 ACKNOWLEDGMENTS ............. ........................... 2 CHAPTER I - INTRODUCTION...481 REFERENCES ............ .............................. ... 491 vi LIST OF FIGURES Page 1 - Air Cushion Graft
The Physics of the B Factories
NASA Astrophysics Data System (ADS)
Bevan, A. J.; Golob, B.; Mannel, Th.; Prell, S.; Yabsley, B. D.; Aihara, H.; Anulli, F.; Arnaud, N.; Aushev, T.; Beneke, M.; Beringer, J.; Bianchi, F.; Bigi, I. I.; Bona, M.; Brambilla, N.; Brodzicka, J.; Chang, P.; Charles, M. J.; Cheng, C. H.; Cheng, H.-Y.; Chistov, R.; Colangelo, P.; Coleman, J. P.; Drutskoy, A.; Druzhinin, V. P.; Eidelman, S.; Eigen, G.; Eisner, A. M.; Faccini, R.; Flood, K. T.; Gambino, P.; Gaz, A.; Gradl, W.; Hayashii, H.; Higuchi, T.; Hulsbergen, W. D.; Hurth, T.; Iijima, T.; Itoh, R.; Jackson, P. D.; Kass, R.; Kolomensky, Yu. G.; Kou, E.; Križan, P.; Kronfeld, A.; Kumano, S.; Kwon, Y. J.; Latham, T. E.; Leith, D. W. G. S.; Lüth, V.; Martinez-Vidal, F.; Meadows, B. T.; Mussa, R.; Nakao, M.; Nishida, S.; Ocariz, J.; Olsen, S. L.; Pakhlov, P.; Pakhlova, G.; Palano, A.; Pich, A.; Playfer, S.; Poluektov, A.; Porter, F. C.; Robertson, S. H.; Roney, J. M.; Roodman, A.; Sakai, Y.; Schwanda, C.; Schwartz, A. J.; Seidl, R.; Sekula, S. J.; Steinhauser, M.; Sumisawa, K.; Swanson, E. S.; Tackmann, F.; Trabelsi, K.; Uehara, S.; Uno, S.; van de Water, R.; Vasseur, G.; Verkerke, W.; Waldi, R.; Wang, M. Z.; Wilson, F. F.; Zupan, J.; Zupanc, A.; Adachi, I.; Albert, J.; Banerjee, Sw.; Bellis, M.; Ben-Haim, E.; Biassoni, P.; Cahn, R. N.; Cartaro, C.; Chauveau, J.; Chen, C.; Chiang, C. C.; Cowan, R.; Dalseno, J.; Davier, M.; Davies, C.; Dingfelder, J. C.; Echenard, B.; Epifanov, D.; Fulsom, B. G.; Gabareen, A. M.; Gary, J. W.; Godang, R.; Graham, M. T.; Hafner, A.; Hamilton, B.; Hartmann, T.; Hayasaka, K.; Hearty, C.; Iwasaki, Y.; Khodjamirian, A.; Kusaka, A.; Kuzmin, A.; Lafferty, G. D.; Lazzaro, A.; Li, J.; Lindemann, D.; Long, O.; Lusiani, A.; Marchiori, G.; Martinelli, M.; Miyabayashi, K.; Mizuk, R.; Mohanty, G. B.; Muller, D. R.; Nakazawa, H.; Ongmongkolkul, P.; Pacetti, S.; Palombo, F.; Pedlar, T. K.; Piilonen, L. E.; Pilloni, A.; Poireau, V.; Prothmann, K.; Pulliam, T.; Rama, M.; Ratcliff, B. N.; Roudeau, P.; Schrenk, S.; Schroeder, T.; Schubert, K. R.; Shen, C. P.; Shwartz, B.; Soffer, A.; Solodov, E. P.; Somov, A.; Starič, M.; Stracka, S.; Telnov, A. V.; Todyshev, K. Yu.; Tsuboyama, T.; Uglov, T.; Vinokurova, A.; Walsh, J. J.; Watanabe, Y.; Won, E.; Wormser, G.; Wright, D. H.; Ye, S.; Zhang, C. C.; Abachi, S.; Abashian, A.; Abe, K.; Abe, N.; Abe, R.; Abe, T.; Abrams, G. S.; Adam, I.; Adamczyk, K.; Adametz, A.; Adye, T.; Agarwal, A.; Ahmed, H.; Ahmed, M.; Ahmed, S.; Ahn, B. S.; Ahn, H. S.; Aitchison, I. J. R.; Akai, K.; Akar, S.; Akatsu, M.; Akemoto, M.; Akhmetshin, R.; Akre, R.; Alam, M. S.; Albert, J. N.; Aleksan, R.; Alexander, J. P.; Alimonti, G.; Allen, M. T.; Allison, J.; Allmendinger, T.; Alsmiller, J. R. G.; Altenburg, D.; Alwyn, K. E.; An, Q.; Anderson, J.; Andreassen, R.; Andreotti, D.; Andreotti, M.; Andress, J. C.; Angelini, C.; Anipko, D.; Anjomshoaa, A.; Anthony, P. L.; Antillon, E. A.; Antonioli, E.; Aoki, K.; Arguin, J. F.; Arinstein, K.; Arisaka, K.; Asai, K.; Asai, M.; Asano, Y.; Asgeirsson, D. J.; Asner, D. M.; Aso, T.; Aspinwall, M. L.; Aston, D.; Atmacan, H.; Aubert, B.; Aulchenko, V.; Ayad, R.; Azemoon, T.; Aziz, T.; Azzolini, V.; Azzopardi, D. E.; Baak, M. A.; Back, J. J.; Bagnasco, S.; Bahinipati, S.; Bailey, D. S.; Bailey, S.; Bailly, P.; van Bakel, N.; Bakich, A. M.; Bala, A.; Balagura, V.; Baldini-Ferroli, R.; Ban, Y.; Banas, E.; Band, H. R.; Banerjee, S.; Baracchini, E.; Barate, R.; Barberio, E.; Barbero, M.; Bard, D. J.; Barillari, T.; Barlow, N. R.; Barlow, R. J.; Barrett, M.; Bartel, W.; Bartelt, J.; Bartoldus, R.; Batignani, G.; Battaglia, M.; Bauer, J. M.; Bay, A.; Beaulieu, M.; Bechtle, P.; Beck, T. W.; Becker, J.; Becla, J.; Bedny, I.; Behari, S.; Behera, P. K.; Behn, E.; Behr, L.; Beigbeder, C.; Beiline, D.; Bell, R.; Bellini, F.; Bellodi, G.; Belous, K.; Benayoun, M.; Benelli, G.; Benitez, J. F.; Benkebil, M.; Berger, N.; Bernabeu, J.; Bernard, D.; Bernet, R.; Bernlochner, F. U.; Berryhill, J. W.; Bertsche, K.; Besson, P.; Best, D. S.; Bettarini, S.; Bettoni, D.; Bhardwaj, V.; Bhimji, W.; Bhuyan, B.; Biagini, M. E.; Biasini, M.; van Bibber, K.; Biesiada, J.; Bingham, I.; Bionta, R. M.; Bischofberger, M.; Bitenc, U.; Bizjak, I.; Blanc, F.; Blaylock, G.; Blinov, V. E.; Bloom, E.; Bloom, P. C.; Blount, N. L.; Blouw, J.; Bly, M.; Blyth, S.; Boeheim, C. T.; Bomben, M.; Bondar, A.; Bondioli, M.; Bonneaud, G. R.; Bonvicini, G.; Booke, M.; Booth, J.; Borean, C.; Borgland, A. W.; Borsato, E.; Bosi, F.; Bosisio, L.; Botov, A. A.; Bougher, J.; Bouldin, K.; Bourgeois, P.; Boutigny, D.; Bowerman, D. A.; Boyarski, A. M.; Boyce, R. F.; Boyd, J. T.; Bozek, A.; Bozzi, C.; Bračko, M.; Brandenburg, G.; Brandt, T.; Brau, B.; Brau, J.; Breon, A. B.; Breton, D.; Brew, C.; Briand, H.; Bright-Thomas, P. G.; Brigljević, V.; Britton, D. I.; Brochard, F.; Broomer, B.; Brose, J.; Browder, T. E.; Brown, C. L.; Brown, C. M.; Brown, D. N.; Browne, M.; Bruinsma, M.; Brunet, S.; Bucci, F.; Buchanan, C.; Buchmueller, O. L.; Bünger, C.; Bugg, W.; Bukin, A. D.; Bula, R.; Bulten, H.; Burchat, P. R.; Burgess, W.; Burke, J. P.; Button-Shafer, J.; Buzykaev, A. R.; Buzzo, A.; Cai, Y.; Calabrese, R.; Calcaterra, A.; Calderini, G.; Camanzi, B.; Campagna, E.; Campagnari, C.; Capra, R.; Carassiti, V.; Carpinelli, M.; Carroll, M.; Casarosa, G.; Casey, B. C. K.; Cason, N. M.; Castelli, G.; Cavallo, N.; Cavoto, G.; Cecchi, A.; Cenci, R.; Cerizza, G.; Cervelli, A.; Ceseracciu, A.; Chai, X.; Chaisanguanthum, K. S.; Chang, M. C.; Chang, Y. H.; Chang, Y. W.; Chao, D. S.; Chao, M.; Chao, Y.; Charles, E.; Chavez, C. A.; Cheaib, R.; Chekelian, V.; Chen, A.; Chen, E.; Chen, G. P.; Chen, H. F.; Chen, J.-H.; Chen, J. C.; Chen, K. F.; Chen, P.; Chen, S.; Chen, W. T.; Chen, X.; Chen, X. R.; Chen, Y. Q.; Cheng, B.; Cheon, B. G.; Chevalier, N.; Chia, Y. M.; Chidzik, S.; Chilikin, K.; Chistiakova, M. V.; Cizeron, R.; Cho, I. S.; Cho, K.; Chobanova, V.; Choi, H. H. F.; Choi, K. S.; Choi, S. K.; Choi, Y.; Choi, Y. K.; Christ, S.; Chu, P. H.; Chun, S.; Chuvikov, A.; Cibinetto, G.; Cinabro, D.; Clark, A. R.; Clark, P. J.; Clarke, C. K.; Claus, R.; Claxton, B.; Clifton, Z. C.; Cochran, J.; Cohen-Tanugi, J.; Cohn, H.; Colberg, T.; Cole, S.; Colecchia, F.; Condurache, C.; Contri, R.; Convert, P.; Convery, M. R.; Cooke, P.; Copty, N.; Cormack, C. M.; Dal Corso, F.; Corwin, L. A.; Cossutti, F.; Cote, D.; Cotta Ramusino, A.; Cottingham, W. N.; Couderc, F.; Coupal, D. P.; Covarelli, R.; Cowan, G.; Craddock, W. W.; Crane, G.; Crawley, H. B.; Cremaldi, L.; Crescente, A.; Cristinziani, M.; Crnkovic, J.; Crosetti, G.; Cuhadar-Donszelmann, T.; Cunha, A.; Curry, S.; D'Orazio, A.; Dû, S.; Dahlinger, G.; Dahmes, B.; Dallapiccola, C.; Danielson, N.; Danilov, M.; Das, A.; Dash, M.; Dasu, S.; Datta, M.; Daudo, F.; Dauncey, P. D.; David, P.; Davis, C. L.; Day, C. T.; De Mori, F.; De Domenico, G.; De Groot, N.; De la Vaissière, C.; de la Vaissière, Ch.; de Lesquen, A.; De Nardo, G.; de Sangro, R.; De Silva, A.; DeBarger, S.; Decker, F. J.; del Amo Sanchez, P.; Del Buono, L.; Del Gamba, V.; del Re, D.; Della Ricca, G.; Denig, A. G.; Derkach, D.; Derrington, I. M.; DeStaebler, H.; Destree, J.; Devmal, S.; Dey, B.; Di Girolamo, B.; Marco, E. Di; Dickopp, M.; Dima, M. O.; Dittrich, S.; Dittongo, S.; Dixon, P.; Dneprovsky, L.; Dohou, F.; Doi, Y.; Doležal, Z.; Doll, D. A.; Donald, M.; Dong, L.; Dong, L. Y.; Dorfan, J.; Dorigo, A.; Dorsten, M. P.; Dowd, R.; Dowdell, J.; Drásal, Z.; Dragic, J.; Drummond, B. W.; Dubitzky, R. S.; Dubois-Felsmann, G. P.; Dubrovin, M. S.; Duh, Y. C.; Duh, Y. T.; Dujmic, D.; Dungel, W.; Dunwoodie, W.; Dutta, D.; Dvoretskii, A.; Dyce, N.; Ebert, M.; Eckhart, E. A.; Ecklund, S.; Eckmann, R.; Eckstein, P.; Edgar, C. L.; Edwards, A. J.; Egede, U.; Eichenbaum, A. M.; Elmer, P.; Emery, S.; Enari, Y.; Enomoto, R.; Erdos, E.; Erickson, R.; Ernst, J. A.; Erwin, R. J.; Escalier, M.; Eschenburg, V.; Eschrich, I.; Esen, S.; Esteve, L.; Evangelisti, F.; Everton, C. W.; Eyges, V.; Fabby, C.; Fabozzi, F.; Fahey, S.; Falbo, M.; Fan, S.; Fang, F.; Fanin, C.; Farbin, A.; Farhat, H.; Fast, J. E.; Feindt, M.; Fella, A.; Feltresi, E.; Ferber, T.; Fernholz, R. E.; Ferrag, S.; Ferrarotto, F.; Ferroni, F.; Field, R. C.; Filippi, A.; Finocchiaro, G.; Fioravanti, E.; Firmino da Costa, J.; Fischer, P.-A.; Fisher, A. S.; Fisher, P. H.; Flacco, C. J.; Flack, R. L.; Flaecher, H. U.; Flanagan, J.; Flanigan, J. M.; Ford, K. E.; Ford, W. T.; Forster, I. J.; Forti, A. C.; Forti, F.; Fortin, D.; Foster, B.; Foulkes, S. D.; Fouque, G.; Fox, J.; Franchini, P.; Franco Sevilla, M.; Franek, B.; Frank, E. D.; Fransham, K. B.; Fratina, S.; Fratini, K.; Frey, A.; Frey, R.; Friedl, M.; Fritsch, M.; Fry, J. R.; Fujii, H.; Fujikawa, M.; Fujita, Y.; Fujiyama, Y.; Fukunaga, C.; Fukushima, M.; Fullwood, J.; Funahashi, Y.; Funakoshi, Y.; Furano, F.; Furman, M.; Furukawa, K.; Futterschneider, H.; Gabathuler, E.; Gabriel, T. A.; Gabyshev, N.; Gaede, F.; Gagliardi, N.; Gaidot, A.; Gaillard, J.-M.; Gaillard, J. R.; Galagedera, S.; Galeazzi, F.; Gallo, F.; Gamba, D.; Gamet, R.; Gan, K. K.; Gandini, P.; Ganguly, S.; Ganzhur, S. F.; Gao, Y. Y.; Gaponenko, I.; Garmash, A.; Garra Tico, J.; Garzia, I.; Gaspero, M.; Gastaldi, F.; Gatto, C.; Gaur, V.; Geddes, N. I.; Geld, T. L.; Genat, J.-F.; George, K. A.; George, M.; George, S.; Georgette, Z.; Gershon, T. J.; Gill, M. S.; Gillard, R.; Gilman, J. D.; Giordano, F.; Giorgi, M. A.; Giraud, P.-F.; Gladney, L.; Glanzman, T.; Glattauer, R.; Go, A.; Goetzen, K.; Goh, Y. M.; Gokhroo, G.; Goldenzweig, P.; Golubev, V. B.; Gopal, G. P.; Gordon, A.; Gorišek, A.; Goriletsky, V. I.; Gorodeisky, R.; Gosset, L.; Gotow, K.; Gowdy, S. J.; Graffin, P.; Grancagnolo, S.; Grauges, E.; Graziani, G.; Green, M. G.; Greene, M. G.; Grenier, G. J.; Grenier, P.; Griessinger, K.; Grillo, A. A.; Grinyov, B. V.; Gritsan, A. V.; Grosdidier, G.; Grosse Perdekamp, M.; Grosso, P.; Grothe, M.; Groysman, Y.; Grünberg, O.; Guido, E.; Guler, H.; Gunawardane, N. J. W.; Guo, Q. H.; Guo, R. S.; Guo, Z. J.; Guttman, N.; Ha, H.; Ha, H. C.; Haas, T.; Haba, J.; Hachtel, J.; Hadavand, H. K.; Hadig, T.; Hagner, C.; Haire, M.; Haitani, F.; Haji, T.; Haller, G.; Halyo, V.; Hamano, K.; Hamasaki, H.; Hamel de Monchenault, G.; Hamilton, J.; Hamilton, R.; Hamon, O.; Han, B. Y.; Han, Y. L.; Hanada, H.; Hanagaki, K.; Handa, F.; Hanson, J. E.; Hanushevsky, A.; Hara, K.; Hara, T.; Harada, Y.; Harrison, P. F.; Harrison, T. J.; Harrop, B.; Hart, A. J.; Hart, P. A.; Hartfiel, B. L.; Harton, J. L.; Haruyama, T.; Hasan, A.; Hasegawa, Y.; Hast, C.; Hastings, N. C.; Hasuko, K.; Hauke, A.; Hawkes, C. M.; Hayashi, K.; Hazumi, M.; Hee, C.; Heenan, E. M.; Heffernan, D.; Held, T.; Henderson, R.; Henderson, S. W.; Hertzbach, S. S.; Hervé, S.; Heß, M.; Heusch, C. A.; Hicheur, A.; Higashi, Y.; Higasino, Y.; Higuchi, I.; Hikita, S.; Hill, E. J.; Himel, T.; Hinz, L.; Hirai, T.; Hirano, H.; Hirschauer, J. F.; Hitlin, D. G.; Hitomi, N.; Hodgkinson, M. C.; Höcker, A.; Hoi, C. T.; Hojo, T.; Hokuue, T.; Hollar, J. J.; Hong, T. M.; Honscheid, K.; Hooberman, B.; Hopkins, D. A.; Horii, Y.; Hoshi, Y.; Hoshina, K.; Hou, S.; Hou, W. S.; Hryn'ova, T.; Hsiung, Y. B.; Hsu, C. L.; Hsu, S. C.; Hu, H.; Hu, T.; Huang, H. C.; Huang, T. J.; Huang, Y. C.; Huard, Z.; Huffer, M. E.; Hufnagel, D.; Hung, T.; Hutchcroft, D. E.; Hyun, H. J.; Ichizawa, S.; Igaki, T.; Igarashi, A.; Igarashi, S.; Igarashi, Y.; Igonkina, O.; Ikado, K.; Ikeda, H.; Ikeda, H.; Ikeda, K.; Ilic, J.; Inami, K.; Innes, W. R.; Inoue, Y.; Ishikawa, A.; Ishino, H.; Itagaki, K.; Itami, S.; Itoh, K.; Ivanchenko, V. N.; Iverson, R.; Iwabuchi, M.; Iwai, G.; Iwai, M.; Iwaida, S.; Iwamoto, M.; Iwasaki, H.; Iwasaki, M.; Iwashita, T.; Izen, J. M.; Jackson, D. J.; Jackson, F.; Jackson, G.; Jackson, P. S.; Jacobsen, R. G.; Jacoby, C.; Jaegle, I.; Jain, V.; Jalocha, P.; Jang, H. K.; Jasper, H.; Jawahery, A.; Jayatilleke, S.; Jen, C. M.; Jensen, F.; Jessop, C. P.; Ji, X. B.; John, M. J. J.; Johnson, D. R.; Johnson, J. R.; Jolly, S.; Jones, M.; Joo, K. K.; Joshi, N.; Joshi, N. J.; Judd, D.; Julius, T.; Kadel, R. W.; Kadyk, J. A.; Kagan, H.; Kagan, R.; Kah, D. H.; Kaiser, S.; Kaji, H.; Kajiwara, S.; Kakuno, H.; Kameshima, T.; Kaminski, J.; Kamitani, T.; Kaneko, J.; Kang, J. H.; Kang, J. S.; Kani, T.; Kapusta, P.; Karbach, T. M.; Karolak, M.; Karyotakis, Y.; Kasami, K.; Katano, G.; Kataoka, S. U.; Katayama, N.; Kato, E.; Kato, Y.; Kawai, H.; Kawai, M.; Kawamura, N.; Kawasaki, T.; Kay, J.; Kay, M.; Kelly, M. P.; Kelsey, M. H.; Kent, N.; Kerth, L. T.; Khan, A.; Khan, H. R.; Kharakh, D.; Kibayashi, A.; Kichimi, H.; Kiesling, C.; Kikuchi, M.; Kikutani, E.; Kim, B. H.; Kim, C. H.; Kim, D. W.; Kim, H.; Kim, H. J.; Kim, H. O.; Kim, H. W.; Kim, J. B.; Kim, J. H.; Kim, K. T.; Kim, M. J.; Kim, P.; Kim, S. K.; Kim, S. M.; Kim, T. H.; Kim, Y. I.; Kim, Y. J.; King, G. J.; Kinoshita, K.; Kirk, A.; Kirkby, D.; Kitayama, I.; Klemetti, M.; Klose, V.; Klucar, J.; Knecht, N. S.; Knoepfel, K. J.; Knowles, D. J.; Ko, B. R.; Kobayashi, N.; Kobayashi, S.; Kobayashi, T.; Kobel, M. J.; Koblitz, S.; Koch, H.; Kocian, M. L.; Kodyš, P.; Koeneke, K.; Kofler, R.; Koike, S.; Koishi, S.; Koiso, H.; Kolb, J. A.; Kolya, S. D.; Kondo, Y.; Konishi, H.; Koppenburg, P.; Koptchev, V. B.; Kordich, T. M. B.; Korol, A. A.; Korotushenko, K.; Korpar, S.; Kouzes, R. T.; Kovalskyi, D.; Kowalewski, R.; Kozakai, Y.; Kozanecki, W.; Kral, J. F.; Krasnykh, A.; Krause, R.; Kravchenko, E. A.; Krebs, J.; Kreisel, A.; Kreps, M.; Krishnamurthy, M.; Kroeger, R.; Kroeger, W.; Krokovny, P.; Kronenbitter, B.; Kroseberg, J.; Kubo, T.; Kuhr, T.; Kukartsev, G.; Kulasiri, R.; Kulikov, A.; Kumar, R.; Kumar, S.; Kumita, T.; Kuniya, T.; Kunze, M.; Kuo, C. C.; Kuo, T.-L.; Kurashiro, H.; Kurihara, E.; Kurita, N.; Kuroki, Y.; Kurup, A.; Kutter, P. E.; Kuznetsova, N.; Kvasnička, P.; Kyberd, P.; Kyeong, S. H.; Lacker, H. M.; Lae, C. K.; Lamanna, E.; Lamsa, J.; Lanceri, L.; Landi, L.; Lang, M. I.; Lange, D. J.; Lange, J. S.; Langenegger, U.; Langer, M.; Lankford, A. J.; Lanni, F.; Laplace, S.; Latour, E.; Lau, Y. P.; Lavin, D. R.; Layter, J.; Lebbolo, H.; LeClerc, C.; Leddig, T.; Leder, G.; Le Diberder, F.; Lee, C. L.; Lee, J.; Lee, J. S.; Lee, M. C.; Lee, M. H.; Lee, M. J.; Lee, S.-J.; Lee, S. E.; Lee, S. H.; Lee, Y. J.; Lees, J. P.; Legendre, M.; Leitgab, M.; Leitner, R.; Leonardi, E.; Leonidopoulos, C.; Lepeltier, V.; Leruste, Ph.; Lesiak, T.; Levi, M. E.; Levy, S. L.; Lewandowski, B.; Lewczuk, M. J.; Lewis, P.; Li, H.; Li, H. B.; Li, S.; Li, X.; Li, Y.; Gioi, L. Li; Libby, J.; Lidbury, J.; Lillard, V.; Lim, C. L.; Limosani, A.; Lin, C. S.; Lin, J. Y.; Lin, S. W.; Lin, Y. S.; Lindquist, B.; Lindsay, C.; Lista, L.; Liu, C.; Liu, F.; Liu, H.; Liu, H. M.; Liu, J.; Liu, R.; Liu, T.; Liu, Y.; Liu, Z. Q.; Liventsev, D.; Lo Vetere, M.; Locke, C. B.; Lockman, W. S.; Di Lodovico, F.; Lombardo, V.; London, G. W.; Lopes Pegna, D.; Lopez, L.; Lopez-March, N.; Lory, J.; LoSecco, J. M.; Lou, X. C.; Louvot, R.; Lu, A.; Lu, C.; Lu, M.; Lu, R. S.; Lueck, T.; Luitz, S.; Lukin, P.; Lund, P.; Luppi, E.; Lutz, A. M.; Lutz, O.; Lynch, G.; Lynch, H. L.; Lyon, A. J.; Lyubinsky, V. R.; MacFarlane, D. B.; Mackay, C.; MacNaughton, J.; Macri, M. M.; Madani, S.; Mader, W. F.; Majewski, S. A.; Majumder, G.; Makida, Y.; Malaescu, B.; Malaguti, R.; Malclés, J.; Mallik, U.; Maly, E.; Mamada, H.; Manabe, A.; Mancinelli, G.; Mandelkern, M.; Mandl, F.; Manfredi, P. F.; Mangeol, D. J. J.; Manoni, E.; Mao, Z. P.; Margoni, M.; Marker, C. E.; Markey, G.; Marks, J.; Marlow, D.; Marques, V.; Marsiske, H.; Martellotti, S.; Martin, E. C.; Martin, J. P.; Martin, L.; Martinez, A. J.; Marzolla, M.; Mass, A.; Masuzawa, M.; Mathieu, A.; Matricon, P.; Matsubara, T.; Matsuda, T.; Matsuda, T.; Matsumoto, H.; Matsumoto, S.; Matsumoto, T.; Matsuo, H.; Mattison, T. S.; Matvienko, D.; Matyja, A.; Mayer, B.; Mazur, M. A.; Mazzoni, M. A.; McCulloch, M.; McDonald, J.; McFall, J. D.; McGrath, P.; McKemey, A. K.; McKenna, J. A.; Mclachlin, S. E.; McMahon, S.; McMahon, T. R.; McOnie, S.; Medvedeva, T.; Melen, R.; Mellado, B.; Menges, W.; Menke, S.; Merchant, A. M.; Merkel, J.; Messner, R.; Metcalfe, S.; Metzler, S.; Meyer, N. T.; Meyer, T. I.; Meyer, W. T.; Michael, A. K.; Michelon, G.; Michizono, S.; Micout, P.; Miftakov, V.; Mihalyi, A.; Mikami, Y.; Milanes, D. A.; Milek, M.; Mimashi, T.; Minamora, J. S.; Mindas, C.; Minutoli, S.; Mir, L. M.; Mishra, K.; Mitaroff, W.; Miyake, H.; Miyashita, T. S.; Miyata, H.; Miyazaki, Y.; Moffitt, L. C.; Mohanty, G. B.; Mohapatra, A.; Mohapatra, A. K.; Mohapatra, D.; Moll, A.; Moloney, G. R.; Mols, J. P.; Mommsen, R. K.; Monge, M. R.; Monorchio, D.; Moore, T. B.; Moorhead, G. F.; Mora de Freitas, P.; Morandin, M.; Morgan, N.; Morgan, S. E.; Morganti, M.; Morganti, S.; Mori, S.; Mori, T.; Morii, M.; Morris, J. P.; Morsani, F.; Morton, G. W.; Moss, L. J.; Mouly, J. P.; Mount, R.; Mueller, J.; Müller-Pfefferkorn, R.; Mugge, M.; Muheim, F.; Muir, A.; Mullin, E.; Munerato, M.; Murakami, A.; Murakami, T.; Muramatsu, N.; Musico, P.; Nagai, I.; Nagamine, T.; Nagasaka, Y.; Nagashima, Y.; Nagayama, S.; Nagel, M.; Naisbit, M. T.; Nakadaira, T.; Nakahama, Y.; Nakajima, M.; Nakajima, T.; Nakamura, I.; Nakamura, T.; Nakamura, T. T.; Nakano, E.; Nakayama, H.; Nam, J. W.; Narita, S.; Narsky, I.; Nash, J. A.; Natkaniec, Z.; Nauenberg, U.; Nayak, M.; Neal, H.; Nedelkovska, E.; Negrini, M.; Neichi, K.; Nelson, D.; Nelson, S.; Neri, N.; Nesom, G.; Neubauer, S.; Newman-Coburn, D.; Ng, C.; Nguyen, X.; Nicholson, H.; Niebuhr, C.; Nief, J. Y.; Niiyama, M.; Nikolich, M. B.; Nisar, N. K.; Nishimura, K.; Nishio, Y.; Nitoh, O.; Nogowski, R.; Noguchi, S.; Nomura, T.; Nordby, M.; Nosochkov, Y.; Novokhatski, A.; Nozaki, S.; Nozaki, T.; Nugent, I. M.; O'Grady, C. P.; O'Neale, S. W.; O'Neill, F. G.; Oberhof, B.; Oddone, P. J.; Ofte, I.; Ogawa, A.; Ogawa, K.; Ogawa, S.; Ogawa, Y.; Ohkubo, R.; Ohmi, K.; Ohnishi, Y.; Ohno, F.; Ohshima, T.; Ohshima, Y.; Ohuchi, N.; Oide, K.; Oishi, N.; Okabe, T.; Okazaki, N.; Okazaki, T.; Okuno, S.; Olaiya, E. O.; Olivas, A.; Olley, P.; Olsen, J.; Ono, S.; Onorato, G.; Onuchin, A. P.; Onuki, Y.; Ooba, T.; Orimoto, T. J.; Oshima, T.; Osipenkov, I. L.; Ostrowicz, W.; Oswald, C.; Otto, S.; Oyang, J.; Oyanguren, A.; Ozaki, H.; Ozcan, V. E.; Paar, H. P.; Padoan, C.; Paick, K.; Palka, H.; Pan, B.; Pan, Y.; Panduro Vazquez, W.; Panetta, J.; Panova, A. I.; Panvini, R. S.; Panzenböck, E.; Paoloni, E.; Paolucci, P.; Pappagallo, M.; Paramesvaran, S.; Park, C. S.; Park, C. W.; Park, H.; Park, H. K.; Park, K. S.; Park, W.; Parry, R. J.; Parslow, N.; Passaggio, S.; Pastore, F. C.; Patel, P. M.; Patrignani, C.; Patteri, P.; Pavel, T.; Pavlovich, J.; Payne, D. J.; Peak, L. S.; Peimer, D. R.; Pelizaeus, M.; Pellegrini, R.; Pelliccioni, M.; Peng, C. C.; Peng, J. C.; Peng, K. C.; Peng, T.; Penichot, Y.; Pennazzi, S.; Pennington, M. R.; Penny, R. C.; Penzkofer, A.; Perazzo, A.; Perez, A.; Perl, M.; Pernicka, M.; Perroud, J.-P.; Peruzzi, I. M.; Pestotnik, R.; Peters, K.; Peters, M.; Petersen, B. A.; Petersen, T. C.; Petigura, E.; Petrak, S.; Petrella, A.; Petrič, M.; Petzold, A.; Pia, M. G.; Piatenko, T.; Piccolo, D.; Piccolo, M.; Piemontese, L.; Piemontese, M.; Pierini, M.; Pierson, S.; Pioppi, M.; Piredda, G.; Pivk, M.; Plaszczynski, S.; Polci, F.; Pompili, A.; Poropat, P.; Posocco, M.; Potter, C. T.; Potter, R. J. L.; Prasad, V.; Prebys, E.; Prencipe, E.; Prendki, J.; Prepost, R.; Prest, M.; Prim, M.; Pripstein, M.; Prudent, X.; Pruvot, S.; Puccio, E. M. T.; Purohit, M. V.; Qi, N. D.; Quinn, H.; Raaf, J.; Rabberman, R.; Raffaelli, F.; Ragghianti, G.; Rahatlou, S.; Rahimi, A. M.; Rahmat, R.; Rakitin, A. Y.; Randle-Conde, A.; Rankin, P.; Rashevskaya, I.; Ratkovsky, S.; Raven, G.; Re, V.; Reep, M.; Regensburger, J. J.; Reidy, J.; Reif, R.; Reisert, B.; Renard, C.; Renga, F.; Ricciardi, S.; Richman, J. D.; Ritchie, J. L.; Ritter, M.; Rivetta, C.; Rizzo, G.; Roat, C.; Robbe, P.; Roberts, D. A.; Robertson, A. I.; Robutti, E.; Rodier, S.; Rodriguez, D. M.; Rodriguez, J. L.; Rodriguez, R.; Roe, N. A.; Röhrken, M.; Roethel, W.; Rolquin, J.; Romanov, L.; Romosan, A.; Ronan, M. T.; Rong, G.; Ronga, F. J.; Roos, L.; Root, N.; Rosen, M.; Rosenberg, E. I.; Rossi, A.; Rostomyan, A.; Rotondo, M.; Roussot, E.; Roy, J.; Rozanska, M.; Rozen, Y.; Rozen, Y.; Rubin, A. E.; Ruddick, W. O.; Ruland, A. M.; Rybicki, K.; Ryd, A.; Ryu, S.; Ryuko, J.; Sabik, S.; Sacco, R.; Saeed, M. A.; Safai Tehrani, F.; Sagawa, H.; Sahoo, H.; Sahu, S.; Saigo, M.; Saito, T.; Saitoh, S.; Sakai, K.; Sakamoto, H.; Sakaue, H.; Saleem, M.; Salnikov, A. A.; Salvati, E.; Salvatore, F.; Samuel, A.; Sanders, D. A.; Sanders, P.; Sandilya, S.; Sandrelli, F.; Sands, W.; Sands, W. R.; Sanpei, M.; Santel, D.; Santelj, L.; Santoro, V.; Santroni, A.; Sanuki, T.; Sarangi, T. R.; Saremi, S.; Sarti, A.; Sasaki, T.; Sasao, N.; Satapathy, M.; Sato, Nobuhiko; Sato, Noriaki; Sato, Y.; Satoyama, N.; Satpathy, A.; Savinov, V.; Savvas, N.; Saxton, O. H.; Sayeed, K.; Schaffner, S. F.; Schalk, T.; Schenk, S.; Schieck, J. R.; Schietinger, T.; Schilling, C. J.; Schindler, R. H.; Schmid, S.; Schmitz, R. E.; Schmuecker, H.; Schneider, O.; Schnell, G.; Schönmeier, P.; Schofield, K. C.; Schott, G.; Schröder, H.; Schram, M.; Schubert, J.; Schümann, J.; Schultz, J.; Schumm, B. A.; Schune, M. H.; Schwanke, U.; Schwarz, H.; Schwiening, J.; Schwierz, R.; Schwitters, R. F.; Sciacca, C.; Sciolla, G.; Scott, I. J.; Seeman, J.; Seiden, A.; Seitz, R.; Seki, T.; Sekiya, A. I.; Semenov, S.; Semmler, D.; Sen, S.; Senyo, K.; Seon, O.; Serbo, V. V.; Serednyakov, S. I.; Serfass, B.; Serra, M.; Serrano, J.; Settai, Y.; Seuster, R.; Sevior, M. E.; Shakhova, K. V.; Shang, L.; Shapkin, M.; Sharma, V.; Shebalin, V.; Shelkov, V. G.; Shen, B. C.; Shen, D. Z.; Shen, Y. T.; Sherwood, D. J.; Shibata, T.; Shibata, T. A.; Shibuya, H.; Shidara, T.; Shimada, K.; Shimoyama, M.; Shinomiya, S.; Shiu, J. G.; Shorthouse, H. W.; Shpilinskaya, L. I.; Sibidanov, A.; Sicard, E.; Sidorov, A.; Sidorov, V.; Siegle, V.; Sigamani, M.; Simani, M. C.; Simard, M.; Simi, G.; Simon, F.; Simonetto, F.; Sinev, N. B.; Singh, H.; Singh, J. B.; Sinha, R.; Sitt, S.; Skovpen, Yu. I.; Sloane, R. J.; Smerkol, P.; Smith, A. J. S.; Smith, D.; Smith, D. S.; Smith, J. G.; Smol, A.; Snoek, H. L.; Snyder, A.; So, R. Y.; Sobie, R. J.; Soderstrom, E.; Soha, A.; Sohn, Y. S.; Sokoloff, M. D.; Sokolov, A.; Solagna, P.; Solovieva, E.; Soni, N.; Sonnek, P.; Sordini, V.; Spaan, B.; Spanier, S. M.; Spencer, E.; Speziali, V.; Spitznagel, M.; Spradlin, P.; Staengle, H.; Stamen, R.; Stanek, M.; Stanič, S.; Stark, J.; Steder, M.; Steininger, H.; Steinke, M.; Stelzer, J.; Stevanato, E.; Stocchi, A.; Stock, R.; Stoeck, H.; Stoker, D. P.; Stroili, R.; Strom, D.; Strother, P.; Strube, J.; Stugu, B.; Stypula, J.; Su, D.; Suda, R.; Sugahara, R.; Sugi, A.; Sugimura, T.; Sugiyama, A.; Suitoh, S.; Sullivan, M. K.; Sumihama, M.; Sumiyoshi, T.; Summers, D. J.; Sun, L.; Sun, S.; Sundermann, J. E.; Sung, H. F.; Susaki, Y.; Sutcliffe, P.; Suzuki, A.; Suzuki, J.; Suzuki, J. I.; Suzuki, K.; Suzuki, S.; Suzuki, S. Y.; Swain, J. E.; Swain, S. K.; T'Jampens, S.; Tabata, M.; Tackmann, K.; Tajima, H.; Tajima, O.; Takahashi, K.; Takahashi, S.; Takahashi, T.; Takasaki, F.; Takayama, T.; Takita, M.; Tamai, K.; Tamponi, U.; Tamura, N.; Tan, N.; Tan, P.; Tanabe, K.; Tanabe, T.; Tanaka, H. A.; Tanaka, J.; Tanaka, M.; Tanaka, S.; Tanaka, Y.; Tanida, K.; Taniguchi, N.; Taras, P.; Tasneem, N.; Tatishvili, G.; Tatomi, T.; Tawada, M.; Taylor, F.; Taylor, G. N.; Taylor, G. P.; Telnov, V. I.; Teodorescu, L.; Ter-Antonyan, R.; Teramoto, Y.; Teytelman, D.; Thérin, G.; Thiebaux, Ch.; Thiessen, D.; Thomas, E. W.; Thompson, J. M.; Thorne, F.; Tian, X. C.; Tibbetts, M.; Tikhomirov, I.; Tinslay, J. S.; Tiozzo, G.; Tisserand, V.; Tocut, V.; Toki, W. H.; Tomassini, E. W.; Tomoto, M.; Tomura, T.; Torassa, E.; Torrence, E.; Tosi, S.; Touramanis, C.; Toussaint, J. C.; Tovey, S. N.; Trapani, P. P.; Treadwell, E.; Triggiani, G.; Trincaz-Duvoid, S.; Trischuk, W.; Troost, D.; Trunov, A.; Tsai, K. L.; Tsai, Y. T.; Tsujita, Y.; Tsukada, K.; Tsukamoto, T.; Tuggle, J. M.; Tumanov, A.; Tung, Y. W.; Turnbull, L.; Turner, J.; Turri, M.; Uchida, K.; Uchida, M.; Uchida, Y.; Ueki, M.; Ueno, K.; Ujiie, N.; Ulmer, K. A.; Unno, Y.; Urquijo, P.; Ushiroda, Y.; Usov, Y.; Usseglio, M.; Usuki, Y.; Uwer, U.; Va'vra, J.; Vahsen, S. E.; Vaitsas, G.; Valassi, A.; Vallazza, E.; Vallereau, A.; Vanhoefer, P.; van Hoek, W. C.; Van Hulse, C.; van Winkle, D.; Varner, G.; Varnes, E. W.; Varvell, K. E.; Vasileiadis, G.; Velikzhanin, Y. S.; Verderi, M.; Versillé, S.; Vervink, K.; Viaud, B.; Vidal, P. B.; Villa, S.; Villanueva-Perez, P.; Vinograd, E. L.; Vitale, L.; Vitug, G. M.; Voß, C.; Voci, C.; Voena, C.; Volk, A.; von Wimmersperg-Toeller, J. H.; Vorobyev, V.; Vossen, A.; Vuagnin, G.; Vuosalo, C. O.; Wacker, K.; Wagner, A. P.; Wagner, D. L.; Wagner, G.; Wagner, M. N.; Wagner, S. R.; Wagoner, D. E.; Walker, D.; Walkowiak, W.; Wallom, D.; Wang, C. C.; Wang, C. H.; Wang, J.; Wang, J. G.; Wang, K.; Wang, L.; Wang, L. L.; Wang, P.; Wang, T. J.; Wang, W. F.; Wang, X. L.; Wang, Y. F.; Wappler, F. R.; Watanabe, M.; Watson, A. T.; Watson, J. E.; Watson, N. K.; Watt, M.; Weatherall, J. H.; Weaver, M.; Weber, T.; Wedd, R.; Wei, J. T.; Weidemann, A. W.; Weinstein, A. J. R.; Wenzel, W. A.; West, C. A.; West, C. G.; West, T. J.; White, E.; White, R. M.; Wicht, J.; Widhalm, L.; Wiechczynski, J.; Wienands, U.; Wilden, L.; Wilder, M.; Williams, D. C.; Williams, G.; Williams, J. C.; Williams, K. M.; Williams, M. I.; Willocq, S. Y.; Wilson, J. R.; Wilson, M. G.; Wilson, R. J.; Winklmeier, F.; Winstrom, L. O.; Winter, M. A.; Wisniewski, W. J.; Wittgen, M.; Wittlin, J.; Wittmer, W.; Wixted, R.; Woch, A.; Wogsland, B. J.; Won, E.; Wong, Q. K.; Wray, B. C.; Wren, A. C.; Wright, D. M.; Wu, C. H.; Wu, J.; Wu, S. L.; Wulsin, H. W.; Xella, S. M.; Xie, Q. L.; Xie, Y.; Xu, Z. Z.; Yéche, Ch.; Yamada, Y.; Yamaga, M.; Yamaguchi, A.; Yamaguchi, H.; Yamaki, T.; Yamamoto, H.; Yamamoto, N.; Yamamoto, R. K.; Yamamoto, S.; Yamanaka, T.; Yamaoka, H.; Yamaoka, J.; Yamaoka, Y.; Yamashita, Y.; Yamauchi, M.; Yan, D. S.; Yan, Y.; Yanai, H.; Yanaka, S.; Yang, H.; Yang, R.; Yang, S.; Yarritu, A. K.; Yashchenko, S.; Yashima, J.; Yasin, Z.; Yasu, Y.; Ye, S. W.; Yeh, P.; Yi, J. I.; Yi, K.; Yi, M.; Yin, Z. W.; Ying, J.; Yocky, G.; Yokoyama, K.; Yokoyama, M.; Yokoyama, T.; Yoshida, K.; Yoshida, M.; Yoshimura, Y.; Young, C. C.; Yu, C. X.; Yu, Z.; Yuan, C. Z.; Yuan, Y.; Yumiceva, F. X.; Yusa, Y.; Yushkov, A. N.; Yuta, H.; Zacek, V.; Zain, S. B.; Zallo, A.; Zambito, S.; Zander, D.; Zang, S. L.; Zanin, D.; Zaslavsky, B. G.; Zeng, Q. L.; Zghiche, A.; Zhang, B.; Zhang, J.; Zhang, J.; Zhang, L.; Zhang, L. M.; Zhang, S. Q.; Zhang, Z. P.; Zhao, H. W.; Zhao, M.; Zhao, Z. G.; Zheng, Y.; Zheng, Y. H.; Zheng, Z. P.; Zhilich, V.; Zhou, P.; Zhu, R. Y.; Zhu, Y. S.; Zhu, Z. M.; Zhulanov, V.; Ziegler, T.; Ziegler, V.; Zioulas, G.; Zisman, M.; Zito, M.; Zürcher, D.; Zwahlen, N.; Zyukova, O.; Živko, T.; Žontar, D.
2014-11-01
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
The odyssey of Orpheus: the evolution of solo singing.
Miller, R
1996-06-01
Notated sacred solo song dates from 1,000 B.C. Early secular song exhibits modest vocal demands of chant-like character. Popular song and liturgical solo song share common origins. Western European secular song notation began in the early Medieval Age. Compositional writing for solo voice took a dramatic turn toward virtuosity about 1600. By the mid-17th century, the modern solo voice emerged. "Classical" solo vocal literature is not static but is constantly evolving, requiring skills far in excess of those of speech or of early solo song literature; this is equally the case with ethnomusicological and popular singing styles. Efficient use of the singing instrument is essential to the healthy accomplishment of all of these literatures.
Music, Mechanism, and the "Sonic Turn" in Physical Diagnosis.
Pesic, Peter
2016-04-01
The sonic diagnostic techniques of percussion and mediate auscultation advocated by Leopold von Auenbrugger and R. T. H. Laennec developed within larger musical contexts of practice, notation, and epistemology. Earlier, François-Nicolas Marquet proposed a musical notation of pulse that connected felt pulsation with heard music. Though contemporary vitalists rejected Marquet's work, mechanists such as Albrecht von Haller included it into the larger discourse about the physiological manifestations of bodily fluids and fibers. Educated in that mechanistic physiology, Auenbrugger used musical vocabulary to present his work on thoracic percussion; Laennec's musical experience shaped his exploration of the new timbres involved in mediate auscultation. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Missonnier, Hélène; Jacques, Alban; Bang, JiSu; Daydé, Jean; Mirleau-Thebaud, Virginie
2017-01-01
In breeding for disease resistance, the magnitude of the genetic response is difficult to appreciate because of environmental stresses that interact with the plant genotype. We discuss herein the fundamental problems in breeding for disease resistance with the aim being to better understand the interactions between plant, pathogen, and spatial patterns. The goal of this study is to fine tune breeding decisions by incorporating spatial patterns of such biotic factors into the definition of disease-occurrence probability. We use a preexisting statistics method based on geostatistics for a descriptive analysis of biotic factors for trial quality control. The plant-population structure used for spatial-pattern analysis consists of two F1-hybrid cultivars, defined as symptomatic and asymptomatic controls with respect to the studied pathogen. The controls are inserted at specific locations to establish a grid arrangement over the field that include the F1-hybrid cultivars under evaluation. We characterize the spatial structure of the pathogen population and of the general plant environment—with undetermined but present abiotic constraints—not by using direct notation such as flower time or rainfall but by using plant behavior (i.e., leaf symptom severity, indirect notation). The analysis indicates areas with higher or lower risk of disease and reveals a correlation between the symptomatic control and the effective level of disease for sunflowers. This result suggests that the pathogen and/or abiotic components are major factors in determining the probability that a plant develops the disease, which could lead to a misinterpretation of plant resistance. PMID:28817567
Missonnier, Hélène; Jacques, Alban; Bang, JiSu; Daydé, Jean; Mirleau-Thebaud, Virginie
2017-01-01
In breeding for disease resistance, the magnitude of the genetic response is difficult to appreciate because of environmental stresses that interact with the plant genotype. We discuss herein the fundamental problems in breeding for disease resistance with the aim being to better understand the interactions between plant, pathogen, and spatial patterns. The goal of this study is to fine tune breeding decisions by incorporating spatial patterns of such biotic factors into the definition of disease-occurrence probability. We use a preexisting statistics method based on geostatistics for a descriptive analysis of biotic factors for trial quality control. The plant-population structure used for spatial-pattern analysis consists of two F1-hybrid cultivars, defined as symptomatic and asymptomatic controls with respect to the studied pathogen. The controls are inserted at specific locations to establish a grid arrangement over the field that include the F1-hybrid cultivars under evaluation. We characterize the spatial structure of the pathogen population and of the general plant environment-with undetermined but present abiotic constraints-not by using direct notation such as flower time or rainfall but by using plant behavior (i.e., leaf symptom severity, indirect notation). The analysis indicates areas with higher or lower risk of disease and reveals a correlation between the symptomatic control and the effective level of disease for sunflowers. This result suggests that the pathogen and/or abiotic components are major factors in determining the probability that a plant develops the disease, which could lead to a misinterpretation of plant resistance.
NASA Astrophysics Data System (ADS)
Dray, T.
2005-10-01
I have had a love/hate relationship with this book ever since it first came out. On the one hand, this is an excellent introduction for mathematicians to the differential geometry underlying general relativity. On the other hand, this is definitely a book for mathematicians. The book's greatest strength is its clear, precise presentation of the basic ideas in differential geometry, combined with equally clear and precise applications to theoretical physics, notably general relativity. But the book's precision is also its greatest weakness; this is not an easy book to read for non-mathematicians, who may not appreciate the notational complexity, some of which is nonstandard. The present edition is very similar to the original, published in 1992. In addition to minor revisions and clarifications of the material, there is now a brief introduction to fibre bundles, and a (very) brief discussion of the gauge theory description of fundamental particles. The index to the symbols used is also a more complete than in the past, but without the descriptive material present in the previous edition. The bulk of the book consists of a careful introduction to tensors and their properties. Tensors are introduced first as linear maps on vector spaces, and only later generalized to tensor fields on manifolds. The differentiation and integration of differential forms is discussed in detail, including Stokes' theorem, Lie differentiation and Hodge duality, and connections, curvature and torsion. To this point, Wasserman's text can be viewed as an expanded version of Bishop and Goldberg's classic text [1], one major difference being Wasserman's inclusion of the pseudo-Riemannian case from the beginning (in particular, when discussing Hodge duality). Whether one prefers Wasserman's approach to Bishop and Goldberg's is largely a matter of taste: Wasserman's treatment is both more complete and more precise, making it easier to check calculations in detail, but occasionally more difficult to remember what one is calculating. An instructor using this text would be well advised to think carefully about which topics to cover, rather than trying to do everything. The remainder of the book contains applications to mechanics, relativity and gauge theory. In each case, better treatments exist elsewhere. However, each such treatment typically introduces its own notation; it is not without some truth that differential geometry is often described as the study of objects under changes of notation. Having several short treatments of these different topics in one place makes it easy for the instructor to choose those he or she wishes to emphasize, while providing a clear transition to more advanced treatments. The presentation does have some idiosyncrasies. The key concept of a derivation is not clearly defined. Some subtleties are referred to in cryptic comments ('This space is too large') which are never explained. The occasionally nonstandard notation is not always easy to follow, although this is a common criticism of introductory texts in differential geometry, which must balance precision with understanding. And appropriate cross references are not always given in sentences of the form 'Recall that ...', which on occasion contained (correct) results which I did not find obvious, and which I could not quickly find explicitly stated in earlier sections. I also have one minor gripe about the publishing format, namely that the outside margins are too small, at only 1 cm; I found this extremely distracting. But all of these criticisms are minor. Wasserman's book would unquestionably be an excellent introduction to tensor analysis for mathematicians, especially those who are interested in the physics applications. The readers of Classical and Quantum Gravity will want to know whether the book is equally suitable as a text for an introductory course in general relativity. At first glance, this text appears to fill a niche in mathematical sophistication between, say, the undergraduate texts by Schutz [2] or d'Inverno [3], which do not require prior background in differential geometry, and the graduate text by Sachs [4], which does. Nonetheless, the answer, unfortunately, is no. I teach a course in general relativity primarily aimed at advanced undergraduate mathematics majors, which is, however, taken by both undergraduate and graduate students in both mathematics and physics; it is the only course in general relativity taught at my university. Each time I teach the course, I struggle to choose an appropriate text. Wasserman's book has frequently been one of the finalists, but I have never quite been willing to inflict it on my physics students, choosing instead to list it as an optional text. (I have been equally unwilling to inflict Hartle's marvellous book [5] on my mathematics students.) My main objection to this book as a relativity text is not, however, due to concern that the mathematical sophistication is too much for undergraduate physics students. Rather, as a mathematical text in relativity, it does not go far enough. The standard applications are here, but just barely. There is a good discussion of the Schwarzschild solution, including applications to solar system tests and its interpretation as a black hole. However, the Kerr solution is barely mentioned, and the Reissner-Nordström solution is conspicuously absent. Similarly, the cosmological implications of the Friedmann-Robertson-Walker solutions are discussed only briefly. And that's it - no further cosmology, no mention of gravitational waves, etc. Fair enough for a mathematics text in tensor analysis, but not enough to permit this book to be used as a standalone relativity text. This is, ultimately, why I have never used this book as a primary text: I want to spend more time doing relativity and less time proving theorems. For a course for mathematicians (only), however, or as a supplementary text filling in some of the missing mathematical details, this book would be an excellent choice. References [1] Bishop R L and Goldberg S I 1980 Tensor Analysis on Manifolds (New York: Dover) [2] Schutz B F 1985 A First Course in General Relativity (Cambridge: Cambridge University Press) [3] d'Inverno R 1991 Introducing Einstein's Relativity (Oxford: Oxford University Press) [4] Sachs R K 1977 General Relativity for Mathematicians (New York: Springer) [5] Hartle J B 2003 Gravity: An Introduction to Einstein's General Relativity (San Francisco: Addison Wesley)
A Survey of Logic Formalisms to Support Mishap Analysis
NASA Technical Reports Server (NTRS)
Johnson, Chris; Holloway, C. M.
2003-01-01
Mishap investigations provide important information about adverse events and near miss incidents. They are intended to help avoid any recurrence of previous failures. Over time, they can also yield statistical information about incident frequencies that helps to detect patterns of failure and can validate risk assessments. However, the increasing complexity of many safety critical systems is posing new challenges for mishap analysis. Similarly, the recognition that many failures have complex, systemic causes has helped to widen the scope of many mishap investigations. These two factors have combined to pose new challenges for the analysis of adverse events. A new generation of formal and semi-formal techniques have been proposed to help investigators address these problems. We introduce the term mishap logics to collectively describe these notations that might be applied to support the analysis of mishaps. The proponents of these notations have argued that they can be used to formally prove that certain events created the necessary and sufficient causes for a mishap to occur. These proofs can be used to reduce the bias that is often perceived to effect the interpretation of adverse events. Others have argued that one cannot use logic formalisms to prove causes in the same way that one might prove propositions or theorems. Such mechanisms cannot accurately capture the wealth of inductive, deductive and statistical forms of inference that investigators must use in their analysis of adverse events. This paper provides an overview of these mishap logics. It also identifies several additional classes of logic that might also be used to support mishap analysis.
NASA Astrophysics Data System (ADS)
Wasser, Avi; Lincoln, Maya
In recent years, both practitioners and applied researchers have become increasingly interested in methods for integrating business process models and enterprise software systems through the deployment of enabling middleware. Integrative BPM research has been mainly focusing on the conversion of workflow notations into enacted application procedures, and less effort has been invested in enhancing the connectivity between design level, non-workflow business process models and related enactment systems such as: ERP, SCM and CRM. This type of integration is useful at several stages of an IT system lifecycle, from design and implementation through change management, upgrades and rollout. The paper presents an integration method that utilizes SOA for connecting business process models with corresponding enterprise software systems. The method is then demonstrated through an Oracle E-Business Suite procurement process and its ERP transactions.
Multi-layered reasoning by means of conceptual fuzzy sets
NASA Technical Reports Server (NTRS)
Takagi, Tomohiro; Imura, Atsushi; Ushida, Hirohide; Yamaguchi, Toru
1993-01-01
The real world consists of a very large number of instances of events and continuous numeric values. On the other hand, people represent and process their knowledge in terms of abstracted concepts derived from generalization of these instances and numeric values. Logic based paradigms for knowledge representation use symbolic processing both for concept representation and inference. Their underlying assumption is that a concept can be defined precisely. However, as this assumption hardly holds for natural concepts, it follows that symbolic processing cannot deal with such concepts. Thus symbolic processing has essential problems from a practical point of view of applications in the real world. In contrast, fuzzy set theory can be viewed as a stronger and more practical notation than formal, logic based theories because it supports both symbolic processing and numeric processing, connecting the logic based world and the real world. In this paper, we propose multi-layered reasoning by using conceptual fuzzy sets (CFS). The general characteristics of CFS are discussed along with upper layer supervision and context dependent processing.
Use of data description languages in the interchange of data
NASA Technical Reports Server (NTRS)
Pignede, M.; Real-Planells, B.; Smith, S. R.
1994-01-01
The Consultative Committee for Space Data Systems (CCSDS) is developing Standards for the interchange of information between systems, including those operating under different environments. The objective is to perform the interchange automatically, i.e. in a computer interpretable manner. One aspect of the concept developed by CCSDS is the use of a separate data description to specify the data being transferred. Using the description, data can then be automatically parsed by the receiving computer. With a suitably expressive Data Description Language (DDL), data formats of arbitrary complexity can be handled. The advantages of this approach are: (1) that the description need only be written and distributed once to all users, and (2) new software does not need to be written for each new format, provided generic tools are available to support writing and interpretation of descriptions and the associated data instances. Consequently, the effort of 'hard coding' each new format is avoided and problems of integrating multiple implementations of a given format by different users are avoided. The approach is applicable in any context where computer parsable description of data could enhance efficiency (e.g. within a spacecraft control system, a data delivery system or an archive). The CCSDS have identified several candidate DDL's: EAST (Extended Ada Subset), TSDN (Transfer Syntax Data Notation) and MADEL (Modified ASN.1 as a Data Description Language -- a DDL based on the Abstract Syntax Notation One - ASN.1 - specified in the ISO/IEC 8824). This paper concentrates on ESA's development of MADEL. ESA have also developed a 'proof of concept' prototype of the required support tools, implemented on a PC under MS-DOS, which has successfully demonstrated the feasibility of the approach, including the capability within an application of retrieving and displaying particular data elements, given its MADEL description (i.e. a data description written in MADEL). This paper outlines the work done to date and assesses the applicability of this modified ASN.1 as a DDL. The feasibility of the approach is illustrated with several examples.
Code of Federal Regulations, 2014 CFR
2014-07-01
... date of birth, Social Security Number. Personal notes. Notations created in paper or electronic form..., whatever the storage media (paper, electronic, etc.) about an individual or his or her education, financial...
Code of Federal Regulations, 2012 CFR
2012-07-01
... date of birth, Social Security Number. Personal notes. Notations created in paper or electronic form..., whatever the storage media (paper, electronic, etc.) about an individual or his or her education, financial...
Code of Federal Regulations, 2010 CFR
2010-07-01
... date of birth, Social Security Number. Personal notes. Notations created in paper or electronic form..., whatever the storage media (paper, electronic, etc.) about an individual or his or her education, financial...
Code of Federal Regulations, 2013 CFR
2013-07-01
... date of birth, Social Security Number. Personal notes. Notations created in paper or electronic form..., whatever the storage media (paper, electronic, etc.) about an individual or his or her education, financial...
Code of Federal Regulations, 2011 CFR
2011-07-01
... date of birth, Social Security Number. Personal notes. Notations created in paper or electronic form..., whatever the storage media (paper, electronic, etc.) about an individual or his or her education, financial...
Using equivalence-based instruction to teach piano skills to college students.
Griffith, Kristin R; Ramos, Amber L; Hill, Kelli E; Miguel, Caio F
2018-04-01
The purpose of the current study was to evaluate the effects of equivalence-based instruction (EBI) on the emergence of basic music reading and piano playing skills. Six female college students learned to identify three musical chord notations given their respective dictated names. Participants also learned to play chords on the piano following the dictated name of the chord, and to play the chords to a song on a keyboard. Results are consistent with past research, in that stimuli became substitutable for each other and acquired a common behavioral function. Data suggest that EBI was an effective and efficient procedure to teach adults to read musical notation, as well as play chords and a song on a piano keyboard. © 2018 Society for the Experimental Analysis of Behavior.
Vos, P G; van Dijk, A; Schomaker, L
1994-01-01
A method of time-series analysis and a time-beating experiment were used to test the structural and perceptual validity of notated metre. Autocorrelation applied to the flow of melodic intervals between notes from thirty fragments of compositions for solo instruments by J S Bach strongly supported the validity of bar length specifications. Time-beating data, obtained with four stimuli from the same set, played in an expressionless mode, and presented under categorically distinct tempos to different subgroups of musically trained subjects, were rather inconsistent with respect to tapped bar lengths. However, taps were most frequently given to the events in the stimuli that corresponded with the first beats according to the score notations. No significant effects of tempo on tapping patterns were observed. The findings are discussed in comparison with other examinations of metre inference from musical compositions.
Flexible End2End Workflow Automation of Hit-Discovery Research.
Holzmüller-Laue, Silke; Göde, Bernd; Thurow, Kerstin
2014-08-01
The article considers a new approach of more complex laboratory automation at the workflow layer. The authors purpose the automation of end2end workflows. The combination of all relevant subprocesses-whether automated or manually performed, independently, and in which organizational unit-results in end2end processes that include all result dependencies. The end2end approach focuses on not only the classical experiments in synthesis or screening, but also on auxiliary processes such as the production and storage of chemicals, cell culturing, and maintenance as well as preparatory activities and analyses of experiments. Furthermore, the connection of control flow and data flow in the same process model leads to reducing of effort of the data transfer between the involved systems, including the necessary data transformations. This end2end laboratory automation can be realized effectively with the modern methods of business process management (BPM). This approach is based on a new standardization of the process-modeling notation Business Process Model and Notation 2.0. In drug discovery, several scientific disciplines act together with manifold modern methods, technologies, and a wide range of automated instruments for the discovery and design of target-based drugs. The article discusses the novel BPM-based automation concept with an implemented example of a high-throughput screening of previously synthesized compound libraries. © 2014 Society for Laboratory Automation and Screening.
Position coding effects in a 2D scenario: the case of musical notation.
Perea, Manuel; García-Chamorro, Cristina; Centelles, Arnau; Jiménez, María
2013-07-01
How does the cognitive system encode the location of objects in a visual scene? In the past decade, this question has attracted much attention in the field of visual-word recognition (e.g., "jugde" is perceptually very close to "judge"). Letter transposition effects have been explained in terms of perceptual uncertainty or shared "open bigrams". In the present study, we focus on note position coding in music reading (i.e., a 2D scenario). The usual way to display music is the staff (i.e., a set of 5 horizontal lines and their resultant 4 spaces). When reading musical notation, it is critical to identify not only each note (temporal duration), but also its pitch (y-axis) and its temporal sequence (x-axis). To examine note position coding, we employed a same-different task in which two briefly and consecutively presented staves contained four notes. The experiment was conducted with experts (musicians) and non-experts (non-musicians). For the "different" trials, the critical conditions involved staves in which two internal notes that were switched vertically, horizontally, or fully transposed--as well as the appropriate control conditions. Results revealed that note position coding was only approximate at the early stages of processing and that this encoding process was modulated by expertise. We examine the implications of these findings for models of object position encoding. Copyright © 2013 Elsevier B.V. All rights reserved.
Payao: a community platform for SBML pathway model curation
Matsuoka, Yukiko; Ghosh, Samik; Kikuchi, Norihiro; Kitano, Hiroaki
2010-01-01
Summary: Payao is a community-based, collaborative web service platform for gene-regulatory and biochemical pathway model curation. The system combines Web 2.0 technologies and online model visualization functions to enable a collaborative community to annotate and curate biological models. Payao reads the models in Systems Biology Markup Language format, displays them with CellDesigner, a process diagram editor, which complies with the Systems Biology Graphical Notation, and provides an interface for model enrichment (adding tags and comments to the models) for the access-controlled community members. Availability and implementation: Freely available for model curation service at http://www.payaologue.org. Web site implemented in Seaser Framework 2.0 with S2Flex2, MySQL 5.0 and Tomcat 5.5, with all major browsers supported. Contact: kitano@sbi.jp PMID:20371497
VizieR Online Data Catalog: Orbits based on speckle interferometry at SOAR (Tokovinin, 2016)
NASA Astrophysics Data System (ADS)
Tokovinin, A.
2017-03-01
This paper presents new or updated orbits for 55 binary systems or subsystems. It is based on speckle interferometric measurements made at the 4.1m Southern Astrophyisical Research (SOAR) telescope combined with archival data collected in the Washington Double Star Catalog (WDS; Mason et al. 2001-2014, Cat. B/wds). Table1 lists the orbital elements and their errors in common notation. Individual observations and residuals are listed in Table2. It contains still unpublished measures made at SOAR in 2016, while some published SOAR measures were reprocessed. Table3 provides additional information. (4 data files).
The Greatest Mathematical Discovery?
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bailey, David H.; Borwein, Jonathan M.
2010-05-12
What mathematical discovery more than 1500 years ago: (1) Is one of the greatest, if not the greatest, single discovery in the field of mathematics? (2) Involved three subtle ideas that eluded the greatest minds of antiquity, even geniuses such as Archimedes? (3) Was fiercely resisted in Europe for hundreds of years after its discovery? (4) Even today, in historical treatments of mathematics, is often dismissed with scant mention, or else is ascribed to the wrong source? Answer: Our modern system of positional decimal notation with zero, together with the basic arithmetic computational schemes, which were discovered in India aboutmore » 500 CE.« less
Running head: What color is it
NASA Technical Reports Server (NTRS)
Young, Andrew T.
1988-01-01
Color vision provides low-resolution spectrophotometric information about candidate materials for planetary surfaces that is comparable in precision to wideband photoelectric photometry, and considerably superior to Voyager TV data. Briefly explained are the basic concepts, teminology, and notation of color science. Also shown is how to convert a reflectance spectrum into a color specification. An Appendix lists a simple computer subroutine to convert spectral reflectance into CIE coordinates, and the text explains how to convert these to a surface color in a standard color atlas. Target and printed Solar System colors are compared to show how accurate are the printed colors.
A perceptual account of symbolic reasoning
Landy, David; Allen, Colin; Zednik, Carlos
2014-01-01
People can be taught to manipulate symbols according to formal mathematical and logical rules. Cognitive scientists have traditionally viewed this capacity—the capacity for symbolic reasoning—as grounded in the ability to internally represent numbers, logical relationships, and mathematical rules in an abstract, amodal fashion. We present an alternative view, portraying symbolic reasoning as a special kind of embodied reasoning in which arithmetic and logical formulae, externally represented as notations, serve as targets for powerful perceptual and sensorimotor systems. Although symbolic reasoning often conforms to abstract mathematical principles, it is typically implemented by perceptual and sensorimotor engagement with concrete environmental structures. PMID:24795662
Fields, Chris
2013-08-01
The theory of computation and category theory both employ arrow-based notations that suggest that the basic metaphor "state changes are like motions" plays a fundamental role in all mathematical reasoning involving formal manipulations. If this is correct, structure-mapping inferences implemented by the pre-motor action planning system can be expected to be involved in solving any mathematics problems not solvable by table lookups and number line manipulations alone. Available functional imaging studies of multi-digit arithmetic, algebra, geometry and calculus problem solving are consistent with this expectation.
Introducing Seismic Tomography with Computational Modeling
NASA Astrophysics Data System (ADS)
Neves, R.; Neves, M. L.; Teodoro, V.
2011-12-01
Learning seismic tomography principles and techniques involves advanced physical and computational knowledge. In depth learning of such computational skills is a difficult cognitive process that requires a strong background in physics, mathematics and computer programming. The corresponding learning environments and pedagogic methodologies should then involve sets of computational modelling activities with computer software systems which allow students the possibility to improve their mathematical or programming knowledge and simultaneously focus on the learning of seismic wave propagation and inverse theory. To reduce the level of cognitive opacity associated with mathematical or programming knowledge, several computer modelling systems have already been developed (Neves & Teodoro, 2010). Among such systems, Modellus is particularly well suited to achieve this goal because it is a domain general environment for explorative and expressive modelling with the following main advantages: 1) an easy and intuitive creation of mathematical models using just standard mathematical notation; 2) the simultaneous exploration of images, tables, graphs and object animations; 3) the attribution of mathematical properties expressed in the models to animated objects; and finally 4) the computation and display of mathematical quantities obtained from the analysis of images and graphs. Here we describe virtual simulations and educational exercises which enable students an easy grasp of the fundamental of seismic tomography. The simulations make the lecture more interactive and allow students the possibility to overcome their lack of advanced mathematical or programming knowledge and focus on the learning of seismological concepts and processes taking advantage of basic scientific computation methods and tools.
ChemCalc: a building block for tomorrow's chemical infrastructure.
Patiny, Luc; Borel, Alain
2013-05-24
Web services, as an aspect of cloud computing, are becoming an important part of the general IT infrastructure, and scientific computing is no exception to this trend. We propose a simple approach to develop chemical Web services, through which servers could expose the essential data manipulation functionality that students and researchers need for chemical calculations. These services return their results as JSON (JavaScript Object Notation) objects, which facilitates their use for Web applications. The ChemCalc project http://www.chemcalc.org demonstrates this approach: we present three Web services related with mass spectrometry, namely isotopic distribution simulation, peptide fragmentation simulation, and molecular formula determination. We also developed a complete Web application based on these three Web services, taking advantage of modern HTML5 and JavaScript libraries (ChemDoodle and jQuery).
NASA Technical Reports Server (NTRS)
Haftka, Raphael T.; Cohen, Gerald A.; Mroz, Zenon
1990-01-01
A uniform variational approach to sensitivity analysis of vibration frequencies and bifurcation loads of nonlinear structures is developed. Two methods of calculating the sensitivities of bifurcation buckling loads and vibration frequencies of nonlinear structures, with respect to stiffness and initial strain parameters, are presented. A direct method requires calculation of derivatives of the prebuckling state with respect to these parameters. An adjoint method bypasses the need for these derivatives by using instead the strain field associated with the second-order postbuckling state. An operator notation is used and the derivation is based on the principle of virtual work. The derivative computations are easily implemented in structural analysis programs. This is demonstrated by examples using a general purpose, finite element program and a shell-of-revolution program.
A Tutorial Review on Fractal Spacetime and Fractional Calculus
NASA Astrophysics Data System (ADS)
He, Ji-Huan
2014-11-01
This tutorial review of fractal-Cantorian spacetime and fractional calculus begins with Leibniz's notation for derivative without limits which can be generalized to discontinuous media like fractal derivative and q-derivative of quantum calculus. Fractal spacetime is used to elucidate some basic properties of fractal which is the foundation of fractional calculus, and El Naschie's mass-energy equation for the dark energy. The variational iteration method is used to introduce the definition of fractional derivatives. Fractal derivative is explained geometrically and q-derivative is motivated by quantum mechanics. Some effective analytical approaches to fractional differential equations, e.g., the variational iteration method, the homotopy perturbation method, the exp-function method, the fractional complex transform, and Yang-Laplace transform, are outlined and the main solution processes are given.
Elastic properties of uniaxial-fiber reinforced composites - General features
NASA Astrophysics Data System (ADS)
Datta, Subhendu; Ledbetter, Hassel; Lei, Ming
The salient features of the elastic properties of uniaxial-fiber-reinforced composites are examined by considering the complete set of elastic constants of composites comprising isotropic uniaxial fibers in an isotropic matrix. Such materials exhibit transverse-isotropic symmetry and five independent elastic constants in Voigt notation: C(11), C(33), C(44), C(66), and C(13). These C(ij) constants are calculated over the entire fiber-volume-fraction range 0.0-1.0, using a scattered-plane-wave ensemple-average model. Some practical elastic constants such as the principal Young moduli and the principal Poisson ratios are considered, and the behavior of these constants is discussed. Also presented are the results for the four principal sound velocities used to study uniaxial-fiber-reinforced composites: v(11), v(33), v(12), and v(13).
Analysis of two-player quantum games in an EPR setting using Clifford's geometric algebra.
Chappell, James M; Iqbal, Azhar; Abbott, Derek
2012-01-01
The framework for playing quantum games in an Einstein-Podolsky-Rosen (EPR) type setting is investigated using the mathematical formalism of geometric algebra (GA). The main advantage of this framework is that the players' strategy sets remain identical to the ones in the classical mixed-strategy version of the game, and hence the quantum game becomes a proper extension of the classical game, avoiding a criticism of other quantum game frameworks. We produce a general solution for two-player games, and as examples, we analyze the games of Prisoners' Dilemma and Stag Hunt in the EPR setting. The use of GA allows a quantum-mechanical analysis without the use of complex numbers or the Dirac Bra-ket notation, and hence is more accessible to the non-physicist.
Analysis of Two-Player Quantum Games in an EPR Setting Using Clifford's Geometric Algebra
Chappell, James M.; Iqbal, Azhar; Abbott, Derek
2012-01-01
The framework for playing quantum games in an Einstein-Podolsky-Rosen (EPR) type setting is investigated using the mathematical formalism of geometric algebra (GA). The main advantage of this framework is that the players' strategy sets remain identical to the ones in the classical mixed-strategy version of the game, and hence the quantum game becomes a proper extension of the classical game, avoiding a criticism of other quantum game frameworks. We produce a general solution for two-player games, and as examples, we analyze the games of Prisoners' Dilemma and Stag Hunt in the EPR setting. The use of GA allows a quantum-mechanical analysis without the use of complex numbers or the Dirac Bra-ket notation, and hence is more accessible to the non-physicist. PMID:22279525
ERIC Educational Resources Information Center
Mathematics Teaching, 1972
1972-01-01
Topics discussed in this column include patterns of inverse multipliers in modular arithmetic; diagrams for product sets, set intersection, and set union; function notation; patterns in the number of partitions of positive integers; and tessellations. (DT)
ERIC Educational Resources Information Center
Wolf, Walter A., Ed.
1977-01-01
Presents a convenient notation for powers of ten and logarithms, a demonstration of the nonstoichiometry of nickel oxide, a simplification for obtaining Russell-Saunders term symbols, and a scheme for biochemistry laboratory experiments. (SL)
Ceroni, Alessio; Dell, Anne; Haslam, Stuart M
2007-08-07
Carbohydrates play a critical role in human diseases and their potential utility as biomarkers for pathological conditions is a major driver for characterization of the glycome. However, the additional complexity of glycans compared to proteins and nucleic acids has slowed the advancement of glycomics in comparison to genomics and proteomics. The branched nature of carbohydrates, the great diversity of their constituents and the numerous alternative symbolic notations, make the input and display of glycans not as straightforward as for example the amino-acid sequence of a protein. Every glycoinformatic tool providing a user interface would benefit from a fast, intuitive, appealing mechanism for input and output of glycan structures in a computer readable format. A software tool for building and displaying glycan structures using a chosen symbolic notation is described here. The "GlycanBuilder" uses an automatic rendering algorithm to draw the saccharide symbols and to place them on the drawing board. The information about the symbolic notation is derived from a configurable graphical model as a set of rules governing the aspect and placement of residues and linkages. The algorithm is able to represent a structure using only few traversals of the tree and is inherently fast. The tool uses an XML format for import and export of encoded structures. The rendering algorithm described here is able to produce high-quality representations of glycan structures in a chosen symbolic notation. The automated rendering process enables the "GlycanBuilder" to be used both as a user-independent component for displaying glycans and as an easy-to-use drawing tool. The "GlycanBuilder" can be integrated in web pages as a Java applet for the visual editing of glycans. The same component is available as a web service to render an encoded structure into a graphical format. Finally, the "GlycanBuilder" can be integrated into other applications to create intuitive and appealing user interfaces: an example is the "GlycoWorkbench", a software tool for assisted annotation of glycan mass spectra. The "GlycanBuilder" represent a flexible, reliable and efficient solution to the problem of input and output of glycan structures in any glycomic tool or database.
NASA Technical Reports Server (NTRS)
Havelund, Klaus
1999-01-01
The JAVA PATHFINDER, JPF, is a translator from a subset of JAVA 1.0 to PROMELA, the programming language of the SPIN model checker. The purpose of JPF is to establish a framework for verification and debugging of JAVA programming based on model checking. The main goal is to automate program verification such that a programmer can apply it in the daily work without the need for a specialist to manually reformulate a program into a different notation in order to analyze the program. The system is especially suited for analyzing multi-threaded JAVA applications, where normal testing usually falls short. The system can find deadlocks and violations of boolean assertions stated by the programmer in a special assertion language. This document explains how to Use JPF.
DISCO: An object-oriented system for music composition and sound design
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kaper, H. G.; Tipei, S.; Wright, J. M.
2000-09-05
This paper describes an object-oriented approach to music composition and sound design. The approach unifies the processes of music making and instrument building by using similar logic, objects, and procedures. The composition modules use an abstract representation of musical data, which can be easily mapped onto different synthesis languages or a traditionally notated score. An abstract base class is used to derive classes on different time scales. Objects can be related to act across time scales, as well as across an entire piece, and relationships between similar objects can replicate traditional music operations or introduce new ones. The DISCO (Digitalmore » Instrument for Sonification and Composition) system is an open-ended work in progress.« less
Atoms and Molecules Interacting with Light
NASA Astrophysics Data System (ADS)
van der Straten, Peter; Metcalf, Harold
2016-02-01
Part I. Atom-Light Interaction: 1. The classical physics pathway; Appendix 1.A. Damping force on an accelerating charge; Appendix 1.B. Hanle effect; Appendix 1.C. Optical tweezers; 2. Interaction of two-level atoms and light; Appendix 2.A. Pauli matrices for motion of the bloch vector; Appendix 2.B. The Ramsey method; Appendix 2.C. Echoes and interferometry; Appendix 2.D. Adiabatic rapid passage; Appendix 2.E Superposition and entanglement; 3. The atom-light interaction; Appendix 3.A. Proof of the oscillator strength theorem; Appendix 3.B. Electromagnetic fields; Appendix 3.C. The dipole approximation; Appendix 3.D. Time resolved fluorescence from multi-level atoms; 4. 'Forbidden' transitions; Appendix 4.A. Higher order approximations; 5. Spontaneous emission; Appendix 5.A. The quantum mechanical harmonic oscillator; Appendix 5.B. Field quantization; Appendix 5.C. Alternative theories to QED; 6. The density matrix; Appendix 6.A. The Liouville-von Neumann equation; Part II. Internal Structure: 7. The hydrogen atom; Appendix 7.A. Center-of-mass motion; Appendix 7.B. Coordinate systems; Appendix 7.C. Commuting operators; Appendix 7.D. Matrix elements of the radial wavefunctions; 8. Fine structure; Appendix 8.A. The Sommerfeld fine-structure constant; Appendix 8.B. Measurements of the fine structure 9. Effects of the nucleus; Appendix 9.A. Interacting magnetic dipoles; Appendix 9.B. Hyperfine structure for two spin =2 particles; Appendix 9.C. The hydrogen maser; 10. The alkali-metal atoms; Appendix 10.A. Quantum defects for the alkalis; Appendix 10.B. Numerov method; 11. Atoms in magnetic fields; Appendix 11.A. The ground state of atomic hydrogen; Appendix 11.B. Positronium; Appendix 11.C. The non-crossing theorem; Appendix 11.D. Passage through an anticrossing: Landau-Zener transitions; 12. Atoms in electric fields; 13. Rydberg atoms; 14. The helium atom; Appendix 14.A. Variational calculations; Appendix 14.B. Detail on the variational calculations of the ground state; 15. The periodic system of the elements; Appendix 15. A paramagnetism; Appendix 15.B. The color of gold; 16. Molecules; Appendix 16.A. Morse potential; 17. Binding in the hydrogen molecule; Appendix 17.A. Confocal elliptical coordinates; Appendix 17.B. One-electron two-center integrals; Appendix 17.C. Electron-electron interaction in molecular hydrogen; 18. Ultra-cold chemistry; Part III. Applications: 19. Optical forces and laser cooling; 20. Confinement of neutral atoms; 21. Bose-Einstein condensation; Appendix 21.A. Distribution functions; Appendix 21.B. Density of states; 22. Cold molecules; 23. Three level systems; Appendix 23.A. General Case for _1 , _2; 24. Fundamental physics; Part IV. Appendices: Appendix A. Notation and definitions; Appendix B. Units and notation; Appendix C. Angular momentum in quantum mechanics; Appendix D. Transition strengths; References; Index.
22 CFR 181.6 - Documentation and certification.
Code of Federal Regulations, 2011 CFR
2011-04-01
... attention of the Assistant Legal Adviser for Treaty Affairs, with the following notation below the enclosure line: FAIM: Please send attached original agreement to L/T on arrival. (c) Where the original texts of...
Differential form representation of stochastic electromagnetic fields
NASA Astrophysics Data System (ADS)
Haider, Michael; Russer, Johannes A.
2017-09-01
In this work, we revisit the theory of stochastic electromagnetic fields using exterior differential forms. We present a short overview as well as a brief introduction to the application of differential forms in electromagnetic theory. Within the framework of exterior calculus we derive equations for the second order moments, describing stochastic electromagnetic fields. Since the resulting objects are continuous quantities in space, a discretization scheme based on the Method of Moments (MoM) is introduced for numerical treatment. The MoM is applied in such a way, that the notation of exterior calculus is maintained while we still arrive at the same set of algebraic equations as obtained for the case of formulating the theory using the traditional notation of vector calculus. We conclude with an analytic calculation of the radiated electric field of two Hertzian dipole, excited by uncorrelated random currents.
Bandelt, Hans-Jürgen; Kloss-Brandstätter, Anita; Richards, Martin B; Yao, Yong-Gang; Logan, Ian
2014-02-01
Since the determination in 1981 of the sequence of the human mitochondrial DNA (mtDNA) genome, the Cambridge Reference Sequence (CRS), has been used as the reference sequence to annotate mtDNA in molecular anthropology, forensic science and medical genetics. The CRS was eventually upgraded to the revised version (rCRS) in 1999. This reference sequence is a convenient device for recording mtDNA variation, although it has often been misunderstood as a wild-type (WT) or consensus sequence by medical geneticists. Recently, there has been a proposal to replace the rCRS with the so-called Reconstructed Sapiens Reference Sequence (RSRS). Even if it had been estimated accurately, the RSRS would be a cumbersome substitute for the rCRS, as the new proposal fuses--and thus confuses--the two distinct concepts of ancestral lineage and reference point for human mtDNA. Instead, we prefer to maintain the rCRS and to report mtDNA profiles by employing the hitherto predominant circumfix style. Tree diagrams could display mutations by using either the profile notation (in conventional short forms where appropriate) or in a root-upwards way with two suffixes indicating ancestral and derived nucleotides. This would guard against misunderstandings about reporting mtDNA variation. It is therefore neither necessary nor sensible to change the present reference sequence, the rCRS, in any way. The proposed switch to RSRS would inevitably lead to notational chaos, mistakes and misinterpretations.
A Concise Introduction to Quantum Mechanics
NASA Astrophysics Data System (ADS)
Swanson, Mark S.
2018-02-01
Assuming a background in basic classical physics, multivariable calculus, and differential equations, A Concise Introduction to Quantum Mechanics provides a self-contained presentation of the mathematics and physics of quantum mechanics. The relevant aspects of classical mechanics and electrodynamics are reviewed, and the basic concepts of wave-particle duality are developed as a logical outgrowth of experiments involving blackbody radiation, the photoelectric effect, and electron diffraction. The Copenhagen interpretation of the wave function and its relation to the particle probability density is presented in conjunction with Fourier analysis and its generalization to function spaces. These concepts are combined to analyze the system consisting of a particle confined to a box, developing the probabilistic interpretation of observations and their associated expectation values. The Schrödinger equation is then derived by using these results and demanding both Galilean invariance of the probability density and Newtonian energy-momentum relations. The general properties of the Schrödinger equation and its solutions are analyzed, and the theory of observables is developed along with the associated Heisenberg uncertainty principle. Basic applications of wave mechanics are made to free wave packet spreading, barrier penetration, the simple harmonic oscillator, the Hydrogen atom, and an electric charge in a uniform magnetic field. In addition, Dirac notation, elements of Hilbert space theory, operator techniques, and matrix algebra are presented and used to analyze coherent states, the linear potential, two state oscillations, and electron diffraction. Applications are made to photon and electron spin and the addition of angular momentum, and direct product multiparticle states are used to formulate both the Pauli exclusion principle and quantum decoherence. The book concludes with an introduction to the rotation group and the general properties of angular momentum.
Earth Reflected Solar Radiation Incident upon an Arbitrarily Oriented Spinning Flat Plate
NASA Technical Reports Server (NTRS)
Cunningham, Fred G.
1963-01-01
A general derivation is given for the earth reflected solar radiation input to a flat plate--a solar cell paddle, for example--which is spinning about an axis coincident with the axis of symmetry of the satellite to which it is affixed. The resulting equations are written for the general case so that arbitrary orientations of the spin axis with respect to the earth-satellite line and arbitrary orientations of the normal to the plate with respect to the spin axis can be treated. No attempt is made to perform the resulting integrations because of the complexity of the equations; nor is there any attempt to delineate the integration limits for the general case. However, the equations governing these limits are given. The appendixes contain: the results, in graphical form, of two representative examples; the general computer program for the calculation is given in Fortran notation; and the results of a calculation of the distribution of albedo energy on the proposed Echo II satellite. The value of the mean solar constant used is 1.395 times 10 (sup 4) ergs per centimeters-squared per second; the mean albedo of the earth is assumed to be 0.34; and the earth is assumed to be a diffuse reflector.
NASA Technical Reports Server (NTRS)
Beebe, R.
1986-01-01
Although the albedo of specific belts and zones varies as a function of time, there is evidence that wind maxima may be fixed in latitude. Before considering a standard notation for wind jets, it is necessary to establish a coordinate system within which the nomenclature would be defined. Traditionally, the BAA has used planetographic latitudes; however, this system is based not only on an accurate determination of the polar diameter but also on the assumption that the equipotential surfaces can be represented by biaxial ellipsoids. The International Astronomical Union strives to adopt unambiguous nomenclature that will be universally acceptable. It is proposed that planetocentric coordinates be utilized and that a standardized value of the ratio of the polar diameter to the equatorial diameter be established for each planet to facilitate transformation into planetographic coordinates.
Formal analysis of imprecise system requirements with Event-B.
Le, Hong Anh; Nakajima, Shin; Truong, Ninh Thuan
2016-01-01
Formal analysis of functional properties of system requirements needs precise descriptions. However, the stakeholders sometimes describe the system with ambiguous, vague or fuzzy terms, hence formal frameworks for modeling and verifying such requirements are desirable. The Fuzzy If-Then rules have been used for imprecise requirements representation, but verifying their functional properties still needs new methods. In this paper, we propose a refinement-based modeling approach for specification and verification of such requirements. First, we introduce a representation of imprecise requirements in the set theory. Then we make use of Event-B refinement providing a set of translation rules from Fuzzy If-Then rules to Event-B notations. After that, we show how to verify both safety and eventuality properties with RODIN/Event-B. Finally, we illustrate the proposed method on the example of Crane Controller.
An expert system for prediction of chemical toxicity
Hickey, James P.; Aldridge, Andrew J.; Passino-Reader, Dora R.; Frank, Anthony M.
1992-01-01
The National Fisheries Research Center- Great Lakes has developed an interactive computer program that uses the structure of an organic molecule to predict its acute toxicity to four aquatic species. The expert system software, written in the muLISP language, identifies the skeletal structures and substituent groups of an organic molecule from a user-supplied standard chemical notation known as a SMILES string, and then generates values for four solvatochromic parameters. Multiple regression equations relate these parameters to the toxicities (expressed as log10LC50s and log10EC50s, along with 95% confidence intervals) for four species. The system is demonstrated by prediction of toxicity for anilide-type pesticides to the fathead minnow (Pimephales promelas). This software is designed for use on an IBM-compatible personal computer by personnel with minimal toxicology background for rapid estimation of chemical toxicity. The system has numerous applications, with much potential for use in the pharmaceutical industry
ERIC Educational Resources Information Center
Lustick, David
1997-01-01
Describes a simple activity that explores and reveals the principles of significant figures and scientific notation using a 500 gram bag of unpopped popcorn. Students must devise a method for determining the number of kernels in the bag. (DDR)
Interactive Courseware Standards
1992-07-01
music industry standard provides data formats and transmission specifications for musical notation. Joint Photographic Experts Group (JPEG). This...has been used in the music industry for several years, especially for electronically programmable keyboards and 16 instruments. The video compression
Code of Federal Regulations, 2010 CFR
2010-07-01
... SCIENCES § 242b.5 Voting. (a) The concurrence of a majority of the Regents present at a meeting shall be... notation voting, by voting on material circulated to Regents individually or serially, or by polling of...
Code of Federal Regulations, 2011 CFR
2011-07-01
... SCIENCES § 242b.5 Voting. (a) The concurrence of a majority of the Regents present at a meeting shall be... notation voting, by voting on material circulated to Regents individually or serially, or by polling of...
Code of Federal Regulations, 2014 CFR
2014-07-01
... SCIENCES § 242b.5 Voting. (a) The concurrence of a majority of the Regents present at a meeting shall be... notation voting, by voting on material circulated to Regents individually or serially, or by polling of...
Code of Federal Regulations, 2012 CFR
2012-07-01
... SCIENCES § 242b.5 Voting. (a) The concurrence of a majority of the Regents present at a meeting shall be... notation voting, by voting on material circulated to Regents individually or serially, or by polling of...
Code of Federal Regulations, 2013 CFR
2013-07-01
... SCIENCES § 242b.5 Voting. (a) The concurrence of a majority of the Regents present at a meeting shall be... notation voting, by voting on material circulated to Regents individually or serially, or by polling of...
A Survey of Models and Algorithms for Social Influence Analysis
NASA Astrophysics Data System (ADS)
Sun, Jimeng; Tang, Jie
Social influence is the behavioral change of a person because of the perceived relationship with other people, organizations and society in general. Social influence has been a widely accepted phenomenon in social networks for decades. Many applications have been built based around the implicit notation of social influence between people, such as marketing, advertisement and recommendations. With the exponential growth of online social network services such as Facebook and Twitter, social influence can for the first time be measured over a large population. In this chapter, we survey the research on social influence analysis with a focus on the computational aspects. First, we present statistical measurements related to social influence. Second, we describe the literature on social similarity and influences. Third, we present the research on social influence maximization which has many practical applications including marketing and advertisement.
AMPHION: Specification-based programming for scientific subroutine libraries
NASA Technical Reports Server (NTRS)
Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Waldinger, Richard; Stickel, Mark
1994-01-01
AMPHION is a knowledge-based software engineering (KBSE) system that guides a user in developing a diagram representing a formal problem specification. It then automatically implements a solution to this specification as a program consisting of calls to subroutines from a library. The diagram provides an intuitive domain oriented notation for creating a specification that also facilitates reuse and modification. AMPHION'S architecture is domain independent. AMPHION is specialized to an application domain by developing a declarative domain theory. Creating a domain theory is an iterative process that currently requires the joint expertise of domain experts and experts in automated formal methods for software development.
Goodman, Dan F M; Brette, Romain
2009-09-01
"Brian" is a simulator for spiking neural networks (http://www.briansimulator.org). The focus is on making the writing of simulation code as quick and easy as possible for the user, and on flexibility: new and non-standard models are no more difficult to define than standard ones. This allows scientists to spend more time on the details of their models, and less on their implementation. Neuron models are defined by writing differential equations in standard mathematical notation, facilitating scientific communication. Brian is written in the Python programming language, and uses vector-based computation to allow for efficient simulations. It is particularly useful for neuroscientific modelling at the systems level, and for teaching computational neuroscience.
IA-Regional-Radio - Social Network for Radio Recommendation
NASA Astrophysics Data System (ADS)
Dziczkowski, Grzegorz; Bougueroua, Lamine; Wegrzyn-Wolska, Katarzyna
This chapter describes the functions of a system proposed for the music hit recommendation from social network data base. This system carries out the automatic collection, evaluation and rating of music reviewers and the possibility for listeners to rate musical hits and recommendations deduced from auditor's profiles in the form of regional Internet radio. First, the system searches and retrieves probable music reviews from the Internet. Subsequently, the system carries out an evaluation and rating of those reviews. From this list of music hits, the system directly allows notation from our application. Finally, the system automatically creates the record list diffused each day depending on the region, the year season, the day hours and the age of listeners. Our system uses linguistics and statistic methods for classifying music opinions and data mining techniques for recommendation part needed for recorded list creation. The principal task is the creation of popular intelligent radio adaptive on auditor's age and region - IA-Regional-Radio.
Evaluation of the Match External Load in Soccer: Methods Comparison.
Castagna, Carlo; Varley, Matthew; Póvoas, Susana C A; D'Ottavio, Stefano
2017-04-01
To test the interchangeability of 2 match-analysis approaches for external-load detection considering arbitrary selected speeds and metabolic power (MP) thresholds in male top-level soccer. Data analyses were performed considering match physical performance of 60 matches (1200 player cases) of randomly selected Spanish, German, and English first-division championship matches (2013-14 season). Match analysis was performed with a validated semiautomated multicamera system operating at 25 Hz. During a match, players covered 10,673 ± 348 m, of which 1778 ± 208 m and 2759 ± 241 m were performed at high intensity, as measured using speed (≥16 km/h, HI) and metabolic power (≥20 W/kg, MPHI) notations. High-intensity notations were nearly perfectly associated (r = .93, P < .0001). A huge method bias (980.63 ± 87.82 m, d = 11.67) was found when considering MPHI and HI. Very large correlations were found between match total distance covered and MPHI (r = .84, P < .0001) and HI (r = .74, P < .0001). Player high-intensity decelerations (≥-2 m/s 2 ) were very largely associated with MPHI (r = .73, P < .0001). The speed and MP methods are highly interchangeable at relative level (magnitude rank) but not absolute level (measure magnitude). The 2 physical match-analysis methods can be independently used to track match external load in elite-level players. However, match-analyst decisions must be based on use of a single method to avoid bias in external-load determination.
10 CFR 1008.17 - Conditions of disclosure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... disclosure is: (1) To officers and employees of the DOE who have a need for the record in the performance of... disseminating a corrected or amended record or notation of a disagreement statement as required by subsection (c...
Towards a Formal Basis for Modular Safety Cases
NASA Technical Reports Server (NTRS)
Denney, Ewen; Pai, Ganesh
2015-01-01
Safety assurance using argument-based safety cases is an accepted best-practice in many safety-critical sectors. Goal Structuring Notation (GSN), which is widely used for presenting safety arguments graphically, provides a notion of modular arguments to support the goal of incremental certification. Despite the efforts at standardization, GSN remains an informal notation whereas the GSN standard contains appreciable ambiguity especially concerning modular extensions. This, in turn, presents challenges when developing tools and methods to intelligently manipulate modular GSN arguments. This paper develops the elements of a theory of modular safety cases, leveraging our previous work on formalizing GSN arguments. Using example argument structures we highlight some ambiguities arising through the existing guidance, present the intuition underlying the theory, clarify syntax, and address modular arguments, contracts, well-formedness and well-scopedness of modules. Based on this theory, we have a preliminary implementation of modular arguments in our toolset, AdvoCATE.
Expressing Intervals in Automated Service Negotiation
NASA Astrophysics Data System (ADS)
Clark, Kassidy P.; Warnier, Martijn; van Splunter, Sander; Brazier, Frances M. T.
During automated negotiation of services between autonomous agents, utility functions are used to evaluate the terms of negotiation. These terms often include intervals of values which are prone to misinterpretation. It is often unclear if an interval embodies a continuum of real numbers or a subset of natural numbers. Furthermore, it is often unclear if an agent is expected to choose only one value, multiple values, a sub-interval or even multiple sub-intervals. Additional semantics are needed to clarify these issues. Normally, these semantics are stored in a domain ontology. However, ontologies are typically domain specific and static in nature. For dynamic environments, in which autonomous agents negotiate resources whose attributes and relationships change rapidly, semantics should be made explicit in the service negotiation. This paper identifies issues that are prone to misinterpretation and proposes a notation for expressing intervals. This notation is illustrated using an example in WS-Agreement.
NASA Technical Reports Server (NTRS)
Milligan, James R.; Dutton, James E.
1993-01-01
In this paper, we have introduced a comprehensive method for enterprise modeling that addresses the three important aspects of how an organization goes about its business. FirstEP includes infrastructure modeling, information modeling, and process modeling notations that are intended to be easy to learn and use. The notations stress the use of straightforward visual languages that are intuitive, syntactically simple, and semantically rich. ProSLCSE will be developed with automated tools and services to facilitate enterprise modeling and process enactment. In the spirit of FirstEP, ProSLCSE tools will also be seductively easy to use. Achieving fully managed, optimized software development and support processes will be long and arduous for most software organizations, and many serious problems will have to be solved along the way. ProSLCSE will provide the ability to document, communicate, and modify existing processes, which is the necessary first step.
Exploring the association between visual perception abilities and reading of musical notation.
Lee, Horng-Yih
2012-06-01
In the reading of music, the acquisition of pitch information depends primarily upon the spatial position of notes as well as upon an individual's spatial processing ability. This study investigated the relationship between the ability to read single notes and visual-spatial ability. Participants with high and low single-note reading abilities were differentiated based upon differences in musical notation-reading abilities and their spatial processing; object recognition abilities were then assessed. It was found that the group with lower note-reading abilities made more errors than did the group with a higher note-reading abilities in the mental rotation task. In contrast, there was no apparent significant difference between the two groups in the object recognition task. These results suggest that note-reading may be related to visual spatial processing abilities, and not to an individual's ability with object recognition.
On the nature of global classification
NASA Technical Reports Server (NTRS)
Wheelis, M. L.; Kandler, O.; Woese, C. R.
1992-01-01
Molecular sequencing technology has brought biology into the era of global (universal) classification. Methodologically and philosophically, global classification differs significantly from traditional, local classification. The need for uniformity requires that higher level taxa be defined on the molecular level in terms of universally homologous functions. A global classification should reflect both principal dimensions of the evolutionary process: genealogical relationship and quality and extent of divergence within a group. The ultimate purpose of a global classification is not simply information storage and retrieval; such a system should also function as an heuristic representation of the evolutionary paradigm that exerts a directing influence on the course of biology. The global system envisioned allows paraphyletic taxa. To retain maximal phylogenetic information in these cases, minor notational amendments in existing taxonomic conventions should be adopted.
Validating agent oriented methodology (AOM) for netlogo modelling and simulation
NASA Astrophysics Data System (ADS)
WaiShiang, Cheah; Nissom, Shane; YeeWai, Sim; Sharbini, Hamizan
2017-10-01
AOM (Agent Oriented Modeling) is a comprehensive and unified agent methodology for agent oriented software development. AOM methodology was proposed to aid developers with the introduction of technique, terminology, notation and guideline during agent systems development. Although AOM methodology is claimed to be capable of developing a complex real world system, its potential is yet to be realized and recognized by the mainstream software community and the adoption of AOM is still at its infancy. Among the reason is that there are not much case studies or success story of AOM. This paper presents two case studies on the adoption of AOM for individual based modelling and simulation. It demonstrate how the AOM is useful for epidemiology study and ecological study. Hence, it further validate the AOM in a qualitative manner.
NASA Technical Reports Server (NTRS)
Arnold, S. M.; Tan, H. Q.; Dong, X.
1989-01-01
Development of new material models for describing the high temperature constitutive behavior of real materials represents an important area of research in engineering disciplines. Derivation of mathematical expressions (constitutive equations) which describe this high temperature material behavior can be quite time consuming, involved and error prone; thus intelligent application of symbolic systems to facilitate this tedious process can be of significant benefit. A computerized procedure (SDICE) capable of efficiently deriving potential based constitutive models, in analytical form is presented. This package, running under MACSYMA, has the following features: partial differentiation, tensor computations, automatic grouping and labeling of common factors, expression substitution and simplification, back substitution of invariant and tensorial relations and a relational data base. Also limited aspects of invariant theory were incorporated into SDICE due to the utilization of potentials as a starting point and the desire for these potentials to be frame invariant (objective). Finally not only calculation of flow and/or evolutionary laws were accomplished but also the determination of history independent nonphysical coefficients in terms of physically measurable parameters, e.g., Young's modulus, was achieved. The uniqueness of SDICE resides in its ability to manipulate expressions in a general yet predefined order and simplify expressions so as to limit expression growth. Results are displayed when applicable utilizing index notation.
39 CFR 221.7 - Postal Service emblem.
Code of Federal Regulations, 2012 CFR
2012-07-01
... and service mark by the U.S. Patent Office. Except for the emblem on official stationery, the emblem must bear one of the following notations: “Reg. U.S. Pat. Off.”, “Registered in U.S. Patent Office”, or...
39 CFR 221.7 - Postal Service emblem.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Service emblem. The Postal Service emblem, which is identical with the seal, is registered as a trademark... must bear one of the following notations: “Reg. U.S. Pat. Off.”, “Registered in U.S. Patent Office”, or...
39 CFR 221.7 - Postal Service emblem.
Code of Federal Regulations, 2013 CFR
2013-07-01
... and service mark by the U.S. Patent Office. Except for the emblem on official stationery, the emblem must bear one of the following notations: “Reg. U.S. Pat. Off.”, “Registered in U.S. Patent Office”, or...
39 CFR 221.7 - Postal Service emblem.
Code of Federal Regulations, 2014 CFR
2014-07-01
... and service mark by the U.S. Patent Office. Except for the emblem on official stationery, the emblem must bear one of the following notations: “Reg. U.S. Pat. Off.”, “Registered in U.S. Patent Office”, or...
39 CFR 221.7 - Postal Service emblem.
Code of Federal Regulations, 2011 CFR
2011-07-01
... and service mark by the U.S. Patent Office. Except for the emblem on official stationery, the emblem must bear one of the following notations: “Reg. U.S. Pat. Off.”, “Registered in U.S. Patent Office”, or...
Quelques problemes poses a la grammaire casuelle (Some Problems Regarding Case Grammar)
ERIC Educational Resources Information Center
Fillmore, Charles J.
1975-01-01
Discusses problems related to case grammar theory, including: the organizations of a case grammar; determination of semantic roles; definition and hierarchy of cases; cause-effect relations; and formalization and notation. (Text is in French.) (AM)
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1998-08-01
An estimated 85% of the installed base of software is a custom application with a production quantity of one. In practice, almost 100% of military software systems are custom software. Paradoxically, the marginal costs of producing additional units are near zero. So why hasn`t the software market, a market with high design costs and low productions costs evolved like other similar custom widget industries, such as automobiles and hardware chips? The military software industry seems immune to market pressures that have motivated a multilevel supply chain structure in other widget industries: design cost recovery, improve quality through specialization, and enablemore » rapid assembly from purchased components. The primary goal of the ComponentWare Consortium (CWC) technology plan was to overcome barriers to building and deploying mission-critical information systems by using verified, reusable software components (Component Ware). The adoption of the ComponentWare infrastructure is predicated upon a critical mass of the leading platform vendors` inevitable adoption of adopting emerging, object-based, distributed computing frameworks--initially CORBA and COM/OLE. The long-range goal of this work is to build and deploy military systems from verified reusable architectures. The promise of component-based applications is to enable developers to snap together new applications by mixing and matching prefabricated software components. A key result of this effort is the concept of reusable software architectures. A second important contribution is the notion that a software architecture is something that can be captured in a formal language and reused across multiple applications. The formalization and reuse of software architectures provide major cost and schedule improvements. The Unified Modeling Language (UML) is fast becoming the industry standard for object-oriented analysis and design notation for object-based systems. However, the lack of a standard real-time distributed object operating system, lack of a standard Computer-Aided Software Environment (CASE) tool notation and lack of a standard CASE tool repository has limited the realization of component software. The approach to fulfilling this need is the software component factory innovation. The factory approach takes advantage of emerging standards such as UML, CORBA, Java and the Internet. The key technical innovation of the software component factory is the ability to assemble and test new system configurations as well as assemble new tools on demand from existing tools and architecture design repositories.« less
The relation of 300-day and 360-day years in the oldest Armenian calendars
NASA Astrophysics Data System (ADS)
Broutian, G. H.
2016-09-01
As we know the two oldest Armenian calendars - the Haykian and Protohaykian calendars have different durations of year. The year in the Haykian calendar consists of 360 days, while the year of Protohaykian calendar has only 300 days. Parallel to the astronomical explanation of this difference another - "ideological" explanation is suggested. These two canonic durations of the year may be developed as a result of comparison of 30-day lunar month and the solar year on the basis of two different calculation systems. The idea of 300-day year was a result of Moon/Sun relation on the basis of decimal system. On the other hand the 360-day year idea was developed as a result of the same relation on the basis of duodecimal notation system. This also means that the conversion from Protohaykian to Haykian calendar must be caused by a serious cultural - religious conversion.
A comprehensive pathway map of epidermal growth factor receptor signaling
Oda, Kanae; Matsuoka, Yukiko; Funahashi, Akira; Kitano, Hiroaki
2005-01-01
The epidermal growth factor receptor (EGFR) signaling pathway is one of the most important pathways that regulate growth, survival, proliferation, and differentiation in mammalian cells. Reflecting this importance, it is one of the best-investigated signaling systems, both experimentally and computationally, and several computational models have been developed for dynamic analysis. A map of molecular interactions of the EGFR signaling system is a valuable resource for research in this area. In this paper, we present a comprehensive pathway map of EGFR signaling and other related pathways. The map reveals that the overall architecture of the pathway is a bow-tie (or hourglass) structure with several feedback loops. The map is created using CellDesigner software that enables us to graphically represent interactions using a well-defined and consistent graphical notation, and to store it in Systems Biology Markup Language (SBML). PMID:16729045
NASA Astrophysics Data System (ADS)
Ehlmann, Bryon K.
Current scientific experiments are often characterized by massive amounts of very complex data and the need for complex data analysis software. Object-oriented database (OODB) systems have the potential of improving the description of the structure and semantics of this data and of integrating the analysis software with the data. This dissertation results from research to enhance OODB functionality and methodology to support scientific databases (SDBs) and, more specifically, to support a nuclear physics experiments database for the Continuous Electron Beam Accelerator Facility (CEBAF). This research to date has identified a number of problems related to the practical application of OODB technology to the conceptual design of the CEBAF experiments database and other SDBs: the lack of a generally accepted OODB design methodology, the lack of a standard OODB model, the lack of a clear conceptual level in existing OODB models, and the limited support in existing OODB systems for many common object relationships inherent in SDBs. To address these problems, the dissertation describes an Object-Relationship Diagram (ORD) and an Object-oriented Database Definition Language (ODDL) that provide tools that allow SDB design and development to proceed systematically and independently of existing OODB systems. These tools define multi-level, conceptual data models for SDB design, which incorporate a simple notation for describing common types of relationships that occur in SDBs. ODDL allows these relationships and other desirable SDB capabilities to be supported by an extended OODB system. A conceptual model of the CEBAF experiments database is presented in terms of ORDs and the ODDL to demonstrate their functionality and use and provide a foundation for future development of experimental nuclear physics software using an OODB approach.
A Scala DSL for RETE-Based Runtime Verification
NASA Technical Reports Server (NTRS)
Havelund, Klaus
2013-01-01
Runtime verification (RV) consists in part of checking execution traces against formalized specifications. Several systems have emerged, most of which support specification notations based on state machines, regular expressions, temporal logic, or grammars. The field of Artificial Intelligence (AI) has for an even longer period of time studied rule-based production systems, which at a closer look appear to be relevant for RV, although seemingly focused on slightly different application domains, such as for example business processes and expert systems. The core algorithm in many of these systems is the Rete algorithm. We have implemented a Rete-based runtime verification system, named LogFire (originally intended for offline log analysis but also applicable to online analysis), as an internal DSL in the Scala programming language, using Scala's support for defining DSLs. This combination appears attractive from a practical point of view. Our contribution is in part conceptual in arguing that such rule-based frameworks originating from AI may be suited for RV.
Code of Federal Regulations, 2014 CFR
2014-07-01
... benefits are precluded by the cited regulations will be stated in the rating. If the evidence is... are not otherwise precluded, the rating will contain a notation reading “Evidence insufficient to...