The importance of emotional intelligence and meaning in life in psycho-oncology.

PubMed

Teques, Andreia Pereira; Carrera, Glória Bueno; Ribeiro, José Pais; Teques, Pedro; Ramón, Ginés Llorca

2016-03-01

Cancer was considered the disease of the 20th century, and the management, treatment, and adaptation of patients to general wellbeing were worldwide concerns. Emotional intelligence has frequently been associated with wellbeing and considered one important factor to optimal human functioning. The purpose of the present study was to test the differences regarding the relationship between emotional intelligence, purpose in life, and satisfaction with life between cancer and healthy people. This model was tested using structural path analysis in two independent samples. First, in a general Portuguese population without chronic disease, 214 participants (nmale  = 41, nfemale  = 173; Mage  = 53). Second, in 202 patients with cancer (nmale  = 40, nfemale  = 162; Mage  = 58.65). A two-step methodology was used to test the research hypothesis. First, a confirmatory factor analysis supported the measurement model. All factors also show reliability, convergent, and discriminate validity. Second, the path coefficients for each model indicate that the proposed relationships differ significantly according to the groups. The perception capacities of emotional intelligence were more related to satisfaction with life and purpose in life in oncologic patients than in the general population without chronic disease, specifically emotional understanding and regulation. Likewise, the relationship between purpose in life and satisfaction with life in oncologic patients was significantly higher than for the general population. The current findings thus suggest that emotional intelligence and purpose in life are potential components to promoting satisfaction in life in healthy people and more so in oncologic patients. Copyright © 2015 John Wiley & Sons, Ltd.

User's guide for a general purpose dam-break flood simulation model (K-634)

USGS Publications Warehouse

Land, Larry F.

1981-01-01

An existing computer program for simulating dam-break floods for forecast purposes has been modified with an emphasis on general purpose applications. The original model was formulated, developed and documented by the National Weather Service. This model is based on the complete flow equations and uses a nonlinear implicit finite-difference numerical method. The first phase of the simulation routes a flood wave through the reservoir and computes an outflow hydrograph which is the sum of the flow through the dam 's structures and the gradually developing breach. The second phase routes this outflow hydrograph through the stream which may be nonprismatic and have segments with subcritical or supercritical flow. The results are discharge and stage hydrographs at the dam as well as all of the computational nodes in the channel. From these hydrographs, peak discharge and stage profiles are tabulated. (USGS)

Modeling Piezoelectric Stack Actuators for Control of Micromanipulation

NASA Technical Reports Server (NTRS)

Goldfarb, Michael; Celanovic, Nikola

1997-01-01

A nonlinear lumped-parameter model of a piezoelectric stack actuator has been developed to describe actuator behavior for purposes of control system analysis and design, and, in particular, for microrobotic applications requiring accurate position and/or force control. In formulating this model, the authors propose a generalized Maxwell resistive capacitor as a lumped-parameter causal representation of rate-independent hysteresis. Model formulation is validated by comparing results of numerical simulations to experimental data. Validation is followed by a discussion of model implications for purposes of actuator control.

Suggesting a General ESP Model for Adult Learners

ERIC Educational Resources Information Center

Al-Jumaily, Samir

2011-01-01

The study suggests a general model that could guarantee the cooperation between teachers and their students to overcome the difficulties encountered in ESP learning. It tries to join together different perspectives in the research of adult education, specifically in the teaching of English for Specific Purposes. It also provides some sort of trust…

A simulation model for forecasting downhill ski participation

Treesearch

Daniel J. Stynes; Daniel M. Spotts

1980-01-01

The purpose of this paper is to describe progress in the development of a general computer simulation model to forecast future levels of outdoor recreation participation. The model is applied and tested for downhill skiing in Michigan.

Analyzing longitudinal data with the linear mixed models procedure in SPSS.

PubMed

West, Brady T

2009-09-01

Many applied researchers analyzing longitudinal data share a common misconception: that specialized statistical software is necessary to fit hierarchical linear models (also known as linear mixed models [LMMs], or multilevel models) to longitudinal data sets. Although several specialized statistical software programs of high quality are available that allow researchers to fit these models to longitudinal data sets (e.g., HLM), rapid advances in general purpose statistical software packages have recently enabled analysts to fit these same models when using preferred packages that also enable other more common analyses. One of these general purpose statistical packages is SPSS, which includes a very flexible and powerful procedure for fitting LMMs to longitudinal data sets with continuous outcomes. This article aims to present readers with a practical discussion of how to analyze longitudinal data using the LMMs procedure in the SPSS statistical software package.

Sustainable Leadership and the Implication for the General Further Education College Sector

ERIC Educational Resources Information Center

Lambert, Steve

2011-01-01

The purpose of this article is to review the models of sustainable leadership which are currently available in the compulsory sector to establish whether the models are appropriate for post-compulsory education, and in particular for general further education colleges. Due to the complexities of the environment in which further education colleges…

A generalized ingrowth model for the northeastern United States

Treesearch

Linda S. Gribko; Donald E. Hilt; Mary Ann Fajvan

1995-01-01

Ingrowth, the number of trees that periodically grow into the smallest inventoried diameter class, has long been recognized as a basic element of multicohort or, uneven-aged, stand development. However, very little information is available to aid forest managers in the estimation of ingrowth. The purpose of this study was to develop a generalized ingrowth model for the...

Implementation of the Automated Numerical Model Performance Metrics System

DTIC Science & Technology

2011-09-26

question. As of this writing, the DSRC IBM AIX machines DaVinci and Pascal, and the Cray XT Einstein all use the PBS batch queuing system for...3.3). 12 Appendix A – General Automation System This system provides general purpose tools and a general way to automatically run

A GENERAL SIMULATION MODEL FOR INFORMATION SYSTEMS: A REPORT ON A MODELLING CONCEPT

DTIC Science & Technology

The report is concerned with the design of large-scale management information systems (MIS). A special design methodology was created, along with a design model to complement it. The purpose of the paper is to present the model.

Comparison of Einstein-Boltzmann solvers for testing general relativity

NASA Astrophysics Data System (ADS)

Bellini, E.; Barreira, A.; Frusciante, N.; Hu, B.; Peirone, S.; Raveri, M.; Zumalacárregui, M.; Avilez-Lopez, A.; Ballardini, M.; Battye, R. A.; Bolliet, B.; Calabrese, E.; Dirian, Y.; Ferreira, P. G.; Finelli, F.; Huang, Z.; Ivanov, M. M.; Lesgourgues, J.; Li, B.; Lima, N. A.; Pace, F.; Paoletti, D.; Sawicki, I.; Silvestri, A.; Skordis, C.; Umiltà, C.; Vernizzi, F.

2018-01-01

We compare Einstein-Boltzmann solvers that include modifications to general relativity and find that, for a wide range of models and parameters, they agree to a high level of precision. We look at three general purpose codes that primarily model general scalar-tensor theories, three codes that model Jordan-Brans-Dicke (JBD) gravity, a code that models f (R ) gravity, a code that models covariant Galileons, a code that models Hořava-Lifschitz gravity, and two codes that model nonlocal models of gravity. Comparing predictions of the angular power spectrum of the cosmic microwave background and the power spectrum of dark matter for a suite of different models, we find agreement at the subpercent level. This means that this suite of Einstein-Boltzmann solvers is now sufficiently accurate for precision constraints on cosmological and gravitational parameters.

Automatic liver segmentation in computed tomography using general-purpose shape modeling methods.

PubMed

Spinczyk, Dominik; Krasoń, Agata

2018-05-29

Liver segmentation in computed tomography is required in many clinical applications. The segmentation methods used can be classified according to a number of criteria. One important criterion for method selection is the shape representation of the segmented organ. The aim of the work is automatic liver segmentation using general purpose shape modeling methods. As part of the research, methods based on shape information at various levels of advancement were used. The single atlas based segmentation method was used as the simplest shape-based method. This method is derived from a single atlas using the deformable free-form deformation of the control point curves. Subsequently, the classic and modified Active Shape Model (ASM) was used, using medium body shape models. As the most advanced and main method generalized statistical shape models, Gaussian Process Morphable Models was used, which are based on multi-dimensional Gaussian distributions of the shape deformation field. Mutual information and sum os square distance were used as similarity measures. The poorest results were obtained for the single atlas method. For the ASM method in 10 analyzed cases for seven test images, the Dice coefficient was above 55[Formula: see text], of which for three of them the coefficient was over 70[Formula: see text], which placed the method in second place. The best results were obtained for the method of generalized statistical distribution of the deformation field. The DICE coefficient for this method was 88.5[Formula: see text] CONCLUSIONS: This value of 88.5 [Formula: see text] Dice coefficient can be explained by the use of general-purpose shape modeling methods with a large variance of the shape of the modeled object-the liver and limitations on the size of our training data set, which was limited to 10 cases. The obtained results in presented fully automatic method are comparable with dedicated methods for liver segmentation. In addition, the deforamtion features of the model can be modeled mathematically by using various kernel functions, which allows to segment the liver on a comparable level using a smaller learning set.

Grain Size and Parameter Recovery with TIMSS and the General Diagnostic Model

ERIC Educational Resources Information Center

Skaggs, Gary; Wilkins, Jesse L. M.; Hein, Serge F.

2016-01-01

The purpose of this study was to explore the degree of grain size of the attributes and the sample sizes that can support accurate parameter recovery with the General Diagnostic Model (GDM) for a large-scale international assessment. In this resampling study, bootstrap samples were obtained from the 2003 Grade 8 TIMSS in Mathematics at varying…

Development of Structural Components of Future Technicians' Professional Competencies during Their Studies of General Disciplines in College

ERIC Educational Resources Information Center

Kopilov, Sergey N.; Dorozhkin, Evgenij M.; Tarasyuk, Olga V.; Osipova, Irina V.; Lazareva, Natalia V.

2016-01-01

The relevance of the problem stems from the necessity to develop and implement the formation model for structural components of future technicians' professional competencies during their studies of general professional disciplines. The purpose of the article is to carry out a theoretical study, to develop and approbate a model that forms the…

Generalized Maintenance Trainer Simulator: Development of Hardware and Software. Final Report.

ERIC Educational Resources Information Center

Towne, Douglas M.; Munro, Allen

A general purpose maintenance trainer, which has the potential to simulate a wide variety of electronic equipments without hardware changes or new computer programs, has been developed and field tested by the Navy. Based on a previous laboratory model, the Generalized Maintenance Trainer Simulator (GMTS) is a relatively low cost trainer that…

Implementation and Research on the Operational Use of the Mesoscale Prediction Model COAMPS in Poland

DTIC Science & Technology

2007-09-30

COAMPS model. Bogumil Jakubiak, University of Warsaw – participated in EGU General Assembly , Vienna Austria 15-20 April 2007 giving one oral and two...conditional forecast (background) error probability density function using an ensemble of the model forecast to generate background error statistics...COAMPS system on ICM machines at Warsaw University for the purpose of providing operational support to the general public using the ICM meteorological

VEEP - Vehicle Economy, Emissions, and Performance program

NASA Technical Reports Server (NTRS)

Heimburger, D. A.; Metcalfe, M. A.

1977-01-01

VEEP is a general-purpose discrete event simulation program being developed to study the performance, fuel economy, and exhaust emissions of a vehicle modeled as a collection of its separate components. It is written in SIMSCRIPT II.5. The purpose of this paper is to present the design methodology, describe the simulation model and its components, and summarize the preliminary results. Topics include chief programmer team concepts, the SDDL design language, program portability, user-oriented design, the program's user command syntax, the simulation procedure, and model validation.

16 CFR 1212.13 - Certification tests.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Certification tests. 1212.13 Section 1212.13... STANDARD FOR MULTI-PURPOSE LIGHTERS Certification Requirements § 1212.13 Certification tests. (a) General... include: (A) Qualification tests, which must be performed on surrogates of each model of multi-purpose...

Optimization of atmospheric transport models on HPC platforms

NASA Astrophysics Data System (ADS)

de la Cruz, Raúl; Folch, Arnau; Farré, Pau; Cabezas, Javier; Navarro, Nacho; Cela, José María

2016-12-01

The performance and scalability of atmospheric transport models on high performance computing environments is often far from optimal for multiple reasons including, for example, sequential input and output, synchronous communications, work unbalance, memory access latency or lack of task overlapping. We investigate how different software optimizations and porting to non general-purpose hardware architectures improve code scalability and execution times considering, as an example, the FALL3D volcanic ash transport model. To this purpose, we implement the FALL3D model equations in the WARIS framework, a software designed from scratch to solve in a parallel and efficient way different geoscience problems on a wide variety of architectures. In addition, we consider further improvements in WARIS such as hybrid MPI-OMP parallelization, spatial blocking, auto-tuning and thread affinity. Considering all these aspects together, the FALL3D execution times for a realistic test case running on general-purpose cluster architectures (Intel Sandy Bridge) decrease by a factor between 7 and 40 depending on the grid resolution. Finally, we port the application to Intel Xeon Phi (MIC) and NVIDIA GPUs (CUDA) accelerator-based architectures and compare performance, cost and power consumption on all the architectures. Implications on time-constrained operational model configurations are discussed.

The architecture of Newton, a general-purpose dynamics simulator

NASA Technical Reports Server (NTRS)

Cremer, James F.; Stewart, A. James

1989-01-01

The architecture for Newton, a general-purpose system for simulating the dynamics of complex physical objects, is described. The system automatically formulates and analyzes equations of motion, and performs automatic modification of this system equations when necessitated by changes in kinematic relationships between objects. Impact and temporary contact are handled, although only using simple models. User-directed influence of simulations is achieved using Newton's module, which can be used to experiment with the control of many-degree-of-freedom articulated objects.

The Topp-Leone generalized Rayleigh cure rate model and its application

NASA Astrophysics Data System (ADS)

Nanthaprut, Pimwarat; Bodhisuwan, Winai; Patummasut, Mena

2017-11-01

Cure rate model is one of the survival analysis when model consider a proportion of the censored data. In clinical trials, the data represent time to recurrence of event or death of patients are used to improve the efficiency of treatments. Each dataset can be separated into two groups: censored and uncensored data. In this work, the new mixture cure rate model is introduced based on the Topp-Leone generalized Rayleigh distribution. The Bayesian approach is employed to estimate its parameters. In addition, a breast cancer dataset is analyzed for model illustration purpose. According to the deviance information criterion, the Topp-Leone generalized Rayleigh cure rate model shows better result than the Weibull and exponential cure rate models.

General Nonlinear Ferroelectric Model v. Beta

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dong, Wen; Robbins, Josh

2017-03-14

The purpose of this software is to function as a generalized ferroelectric material model. The material model is designed to work with existing finite element packages by providing updated information on material properties that are nonlinear and dependent on loading history. The two major nonlinear phenomena this model captures are domain-switching and phase transformation. The software itself does not contain potentially sensitive material information and instead provides a framework for different physical phenomena observed within ferroelectric materials. The model is calibrated to a specific ferroelectric material through input parameters provided by the user.

A Moderate Constructivist E-Learning Instructional Model Evaluated on Computer Specialists

ERIC Educational Resources Information Center

Alonso, Fernando; Manrique, Daniel; Vines, Jose M.

2009-01-01

This paper presents a novel instructional model for e-learning and an evaluation study to determine the effectiveness of this model for teaching Java language programming to information technology specialists working for the Spanish Public Administration. This is a general-purpose model that combines objectivist and constructivist learning…

Historical Development of Simulation Models of Recreation Use

Treesearch

Jan W. van Wagtendonk; David N. Cole

2005-01-01

The potential utility of modeling as a park and wilderness management tool has been recognized for decades. Romesburg (1974) explored how mathematical decision modeling could be used to improve decisions about regulation of wilderness use. Cesario (1975) described a computer simulation modeling approach that utilized GPSS (General Purpose Systems Simulator), a...

[Diagnostic rationalism. Views of general practitioners on fibromyalgia].

PubMed

Daehli, B

1993-09-20

Clinical practice is characterized by having to make numerous important decisions, including the diagnosis. In this study, general practitioners were asked to agree or to disagree with statements of fibromyalgia. The main purpose was to test the usefulness of two well-known models for decision-making when studying diagnosis in cases of uncertainty and scepticism. The results show that the models are inadequate to explain the decisions.

An Integrated Solution for Performing Thermo-fluid Conjugate Analysis

NASA Technical Reports Server (NTRS)

Kornberg, Oren

2009-01-01

A method has been developed which integrates a fluid flow analyzer and a thermal analyzer to produce both steady state and transient results of 1-D, 2-D, and 3-D analysis models. The Generalized Fluid System Simulation Program (GFSSP) is a one dimensional, general purpose fluid analysis code which computes pressures and flow distributions in complex fluid networks. The MSC Systems Improved Numerical Differencing Analyzer (MSC.SINDA) is a one dimensional general purpose thermal analyzer that solves network representations of thermal systems. Both GFSSP and MSC.SINDA have graphical user interfaces which are used to build the respective model and prepare it for analysis. The SINDA/GFSSP Conjugate Integrator (SGCI) is a formbase graphical integration program used to set input parameters for the conjugate analyses and run the models. The contents of this paper describes SGCI and its thermo-fluids conjugate analysis techniques and capabilities by presenting results from some example models including the cryogenic chill down of a copper pipe, a bar between two walls in a fluid stream, and a solid plate creating a phase change in a flowing fluid.

Verification and Validation of a Three-Dimensional Generalized Composite Material Model

NASA Technical Reports Server (NTRS)

Hoffarth, Canio; Harrington, Joseph; Subramaniam, D. Rajan; Goldberg, Robert K.; Carney, Kelly S.; DuBois, Paul; Blankenhorn, Gunther

2014-01-01

A general purpose orthotropic elasto-plastic computational constitutive material model has been developed to improve predictions of the response of composites subjected to high velocity impact. The three-dimensional orthotropic elasto-plastic composite material model is being implemented initially for solid elements in LS-DYNA as MAT213. In order to accurately represent the response of a composite, experimental stress-strain curves are utilized as input, allowing for a more general material model that can be used on a variety of composite applications. The theoretical details are discussed in a companion paper. This paper documents the implementation, verification and qualitative validation of the material model using the T800- F3900 fiber/resin composite material.

Verification and Validation of a Three-Dimensional Generalized Composite Material Model

NASA Technical Reports Server (NTRS)

Hoffarth, Canio; Harrington, Joseph; Rajan, Subramaniam D.; Goldberg, Robert K.; Carney, Kelly S.; DuBois, Paul; Blankenhorn, Gunther

2015-01-01

A general purpose orthotropic elasto-plastic computational constitutive material model has been developed to improve predictions of the response of composites subjected to high velocity impact. The three-dimensional orthotropic elasto-plastic composite material model is being implemented initially for solid elements in LS-DYNA as MAT213. In order to accurately represent the response of a composite, experimental stress-strain curves are utilized as input, allowing for a more general material model that can be used on a variety of composite applications. The theoretical details are discussed in a companion paper. This paper documents the implementation, verification and qualitative validation of the material model using the T800-F3900 fiber/resin composite material

Apprenticeships Should Work for Women Too!

ERIC Educational Resources Information Center

Simon, Linda; Clarke, Kira

2016-01-01

Purpose: The purpose of this paper is to explore some of the issues affecting successful employment outcomes for young women in male-dominated careers, focusing on those generally accessed via a traditional Australian apprenticeship model. Current patterns of participation in trades-based fields of education and training reinforce the highly…

In-Class Purposes of Flipped Mathematics Educators

ERIC Educational Resources Information Center

Eisenhut, Lindsay A.; Taylor, Cynthia E.

2015-01-01

This paper provides empirical findings from a study that examined how three grade 7-12 flipped mathematics educators utilized class time when implementing a flipped learning model. Additionally, the researchers investigated the educators' purposes for various in-class tasks as well as their general use of class time. The data revealed flipped…

Sinda/Fluint Stratfied Tank Modeling

NASA Technical Reports Server (NTRS)

Sakowski, Barbara A.

2014-01-01

A general purpose SINDA/FLUINT (S/F) stratified tank model was created and used to simulate the Ksite1 LH2 liquid self-pressurization tests as well as axial jet mixing within the liquid region of the tank. The S/F model employed the use of stratified layers, i.e. S/F lumps, in the vapor ullage as well as in the liquid region. The model was constructed to analyze a general purpose stratified tank that could incorporate the following features: Multiple or singular lumps in the liquid and vapor regions of the tank, Real gases (also mixtures) and compressible liquids, Venting, pressurizing, and draining, Condensation and evaporation/boiling, Wall heat transfer, Elliptical, cylindrical, and spherical tank geometries. Extensive user logic was used to allow for tailoring of the above features to specific cases. Most of the code input for a specific case could be done through the Registers Data Block.

University Students' Meta-Modelling Knowledge

ERIC Educational Resources Information Center

Krell, Moritz; Krüger, Dirk

2017-01-01

Background: As one part of scientific meta-knowledge, students' meta-modelling knowledge should be promoted on different educational levels such as primary school, secondary school and university. This study focuses on the assessment of university students' meta-modelling knowledge using a paper-pencil questionnaire. Purpose: The general purpose…

Exploring Conceptual Frameworks of Models of Atomic Structures and Periodic Variations, Chemical Bonding, and Molecular Shape and Polarity: A Comparison of Undergraduate General Chemistry Students with High and Low Levels of Content Knowledge

ERIC Educational Resources Information Center

Wang, Chia-Yu; Barrow, Lloyd H.

2013-01-01

The purpose of the study was to explore students' conceptual frameworks of models of atomic structure and periodic variations, chemical bonding, and molecular shape and polarity, and how these conceptual frameworks influence their quality of explanations and ability to shift among chemical representations. This study employed a purposeful sampling…

Bayesian Analysis of Multidimensional Item Response Theory Models: A Discussion and Illustration of Three Response Style Models

ERIC Educational Resources Information Center

Leventhal, Brian C.; Stone, Clement A.

2018-01-01

Interest in Bayesian analysis of item response theory (IRT) models has grown tremendously due to the appeal of the paradigm among psychometricians, advantages of these methods when analyzing complex models, and availability of general-purpose software. Possible models include models which reflect multidimensionality due to designed test structure,…

Mathematical modeling of a Ti:sapphire solid-state laser

NASA Technical Reports Server (NTRS)

Swetits, John J.

1987-01-01

The project initiated a study of a mathematical model of a tunable Ti:sapphire solid-state laser. A general mathematical model was developed for the purpose of identifying design parameters which will optimize the system, and serve as a useful predictor of the system's behavior.

HexSim - A general purpose framework for spatially-explicit, individual-based modeling

EPA Science Inventory

HexSim is a framework for constructing spatially-explicit, individual-based computer models designed for simulating terrestrial wildlife population dynamics and interactions. HexSim is useful for a broad set of modeling applications. This talk will focus on a subset of those ap...

CIRCAL-2 - General-purpose on-line circuit design.

NASA Technical Reports Server (NTRS)

Dertouzos, M. L.; Jessel, G. P.; Stinger, J. R.

1972-01-01

CIRCAL-2 is a second-generation general-purpose on-line circuit-design program with the following main features: (1) multiple-analysis capability; (2) uniform and general data structures for handling text editing, network representations, and output results, regardless of analysis; (3) special techniques and structures for minimizing and controlling user-program interaction; (4) use of functionals for the description of hysteresis and heat effects; and (5) ability to define optimization procedures that 'replace' the user. The paper discusses the organization of CIRCAL-2, the aforementioned main features, and their consequences, such as a set of network elements and models general enough for most analyses and a set of functions tailored to circuit-design requirements. The presentation is descriptive, concentrating on conceptual rather than on program implementation details.

A Large Scale, High Resolution Agent-Based Insurgency Model

DTIC Science & Technology

2013-09-30

CUDA) is NVIDIA Corporation’s software development model for General Purpose Programming on Graphics Processing Units (GPGPU) ( NVIDIA Corporation ...Conference. Argonne National Laboratory, Argonne, IL, October, 2005. NVIDIA Corporation . NVIDIA CUDA Programming Guide 2.0 [Online]. NVIDIA Corporation

49 CFR 579.11 - Reporting responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... to the general business practices of the office in which such determination is made, and the office... NHTSA. For purposes of this paragraph, this period is determined by reference to the general business... reported such determination or notification of determination to NHTSA in a report that identified the model...

Reliability of Next Generation Power Electronics Packaging Under Concurrent Vibration, Thermal and High Power Loads

DTIC Science & Technology

2008-02-01

combined thermal g effect and initial current field. The model is implemented using Abaqus user element subroutine and verified against the experimental...Finite Element Formulation The proposed model is implemented with ABAQUS general purpose finite element program using thermal -displacement analysis...option. ABAQUS and other commercially available finite element codes do not have the capability to solve general electromigration problem directly. Thermal

The Achievement Impact of the Inclusion Model on the Standardized Test Scores of General Education Students

ERIC Educational Resources Information Center

Garrett-Rainey, Syrena

2014-01-01

The purpose of this study was to compare the achievement of general education students within regular education classes to the achievement of general education students in inclusion/co-teach classes to determine whether there was a significant difference in the achievement between the two groups. The school district's inclusion/co-teach model…

Factor Scores, Structure and Communality Coefficients: A Primer

ERIC Educational Resources Information Center

Odum, Mary

2011-01-01

(Purpose) The purpose of this paper is to present an easy-to-understand primer on three important concepts of factor analysis: Factor scores, structure coefficients, and communality coefficients. Given that statistical analyses are a part of a global general linear model (GLM), and utilize weights as an integral part of analyses (Thompson, 2006;…

Educational Approaches to Entrepreneurship in Higher Education: A View from the Swedish Horizon

ERIC Educational Resources Information Center

Hoppe, Magnus; Westerberg, Mats; Leffler, Eva

2017-01-01

Purpose: The purpose of this paper is to present and develop models of educational approaches to entrepreneurship that can provide complementary analytical structures to better study, enact and reflect upon the role of entrepreneurship in higher education. Design/methodology/approach A general framework for entrepreneurship education is developed…

Flow for Exercise Adherence: Testing an Intrinsic Model of Health Behavior

ERIC Educational Resources Information Center

Petosa, R. Lingyak; Holtz, Brian

2013-01-01

Background: Health behavior theory generally does not include intrinsic motivation as a determinate of health practices. Purpose: The purpose of this study was to test the flow theory of exercise adherence. Flow theory posits that exercise can be intrinsically rewarding if the experiences of self/time transcendence and control/mastery are achieved…

Using Appreciative Intelligence for Ice-Breaking: A New Design

ERIC Educational Resources Information Center

Verma, Neena; Pathak, Anil Anand

2011-01-01

Purpose: The purpose of this paper is to highlight the importance of applying appreciative intelligence and appreciative inquiry concepts to design a possibly new model of ice-breaking, which is strengths-based and very often used in any training in general and team building training in particular. Design/methodology/approach: The design has…

Inclusion in Physical Education: From the Medical Model to Social Constructionism

ERIC Educational Resources Information Center

Grenier, Michelle

2007-01-01

The purpose of this discussion is to explore assumptions that have informed constructions of disability and to challenge these as socially constituted judgments that influence the way teachers think and act in general physical education. A secondary purpose is to introduce social constructionism as a discourse that potentially reshapes…

[Treatment of generalized anxiety disorder in terms of cognitive behavioral].

PubMed

Kamrowska, Anna; Gmitrowicz, Agnieszka

2016-02-01

Risk of generalized anxiety disorder (GAD) within life is estimated at 2.6-5.1%. Amongst etiological factors that affect the development of the disorder are: biological and psychological problems, including cognitive models. There are known several cognitive models: metacognitive, Borkovec'c model and the model developed in Quebec. Key cognitive contents that occur with generalized anxiety disorder are focused on two aspects: metacognitive beliefs and intolerance of uncertainty. A primary purpose of cognitive-behavioural therapy (CBT) is the modification of dysfunctional beliefs about worry. Cognitive behavioural therapy is effective in reducing anxiety, makes it easier to operate in the professional sphere and improves the quality of life. © 2016 MEDPRESS.

Systems, Purposes, Images, Plans: A Communication Model.

ERIC Educational Resources Information Center

Hildum, Donald C.

A definition and a general description of communication that makes use of the insights of linguistics and psychology are presented in this paper, along with a conceptual model of communication that incorporates a systems approach. Following a lengthy discussion of the components required for a communication exchange, the systems approach model is…

Data Modeling for Preservice Teachers and Everyone Else

ERIC Educational Resources Information Center

Petrosino, Anthony J.; Mann, Michele J.

2018-01-01

Although data modeling, the employment of statistical reasoning for the purpose of investigating questions about the world, is central to both mathematics and science, it is rarely emphasized in K-16 instruction. The current work focuses on developing thinking about data modeling with undergraduates in general and preservice teachers in…

Pedagogical View of Model Metabolic Cycles

ERIC Educational Resources Information Center

García-Herrero, Victor; Sillero, Antonio

2015-01-01

The main purpose of this study was to present a simplified view of model metabolic cycles. Although the models have been elaborated with the "Mathematica" Program, and using a system of differential equations, the main conclusions were presented in a rather intuitive way, easily understandable by students of general courses of…

Strings in General Music: An Experience with Multiple Sequencing

ERIC Educational Resources Information Center

Martin, Jeffrey

2012-01-01

Instrumental performance that approximates real-world models is one way in which a general music curriculum can encourage high levels of engagement and potential for lifelong musical activity. Although guitars, keyboards, and various folk instruments are useful for this purpose, orchestral instruments can also provide significant solo and ensemble…

General Education: Curriculum. A Capstone Course.

ERIC Educational Resources Information Center

Bunker Hill Community Coll., Boston, MA.

Prepared by the General Education (GE) Review Steering Committee of Massachusetts' Bunker Hill Community College in 1991, this guide provides a model of a Capstone course, a component of the College's newly developed GE Cornerstone Curriculum. Chapter 1 reviews the purpose of Capstone, a mandatory interdisciplinary course designed to integrate the…

Developing Concepts and Generalizations in Secondary Social Studies Programs.

ERIC Educational Resources Information Center

Murray, C. Kenneth

1978-01-01

The purpose of this paper is to explore techniques for helping students to develop concepts and generalizations. The author presents three models (Taba, DeCecco, and Fenton) for concept development, and concludes with a discussion of the taxonomy approach, the single concept technique, and the paragraph technique. (KC)

A general model for estimating lower extremity inertial properties of individuals with transtibial amputation.

PubMed

Ferris, Abbie E; Smith, Jeremy D; Heise, Gary D; Hinrichs, Richard N; Martin, Philip E

2017-03-21

Lower extremity joint moment magnitudes during swing are dependent on the inertial properties of the prosthesis and residual limb of individuals with transtibial amputation (TTA). Often, intact limb inertial properties (INTACT) are used for prosthetic limb values in an inverse dynamics model even though these values overestimate the amputated limb's inertial properties. The purpose of this study was to use subject-specific (SPECIFIC) measures of prosthesis inertial properties to generate a general model (GENERAL) for estimating TTA prosthesis inertial properties. Subject-specific mass, center of mass, and moment of inertia were determined for the shank and foot segments of the prosthesis (n=11) using an oscillation technique and reaction board. The GENERAL model was derived from the means of the SPECIFIC model. Mass and segment lengths are required GENERAL model inputs. Comparisons of segment inertial properties and joint moments during walking were made using three inertial models (unique sample; n=9): (1) SPECIFIC, (2) GENERAL, and (3) INTACT. Prosthetic shank inertial properties were significantly smaller with the SPECIFIC and GENERAL model than the INTACT model, but the SPECIFIC and GENERAL model did not statistically differ. Peak knee and hip joint moments during swing were significantly smaller for the SPECIFIC and GENERAL model compared with the INTACT model and were not significantly different between SPECIFIC and GENERAL models. When subject-specific measures are unavailable, using the GENERAL model produces a better estimate of prosthetic side inertial properties resulting in more accurate joint moment measurements for individuals with TTA than the INTACT model. Copyright © 2017 Elsevier Ltd. All rights reserved.

General Purpose Data-Driven Online System Health Monitoring with Applications to Space Operations

NASA Technical Reports Server (NTRS)

Iverson, David L.; Spirkovska, Lilly; Schwabacher, Mark

2010-01-01

Modern space transportation and ground support system designs are becoming increasingly sophisticated and complex. Determining the health state of these systems using traditional parameter limit checking, or model-based or rule-based methods is becoming more difficult as the number of sensors and component interactions grows. Data-driven monitoring techniques have been developed to address these issues by analyzing system operations data to automatically characterize normal system behavior. System health can be monitored by comparing real-time operating data with these nominal characterizations, providing detection of anomalous data signatures indicative of system faults, failures, or precursors of significant failures. The Inductive Monitoring System (IMS) is a general purpose, data-driven system health monitoring software tool that has been successfully applied to several aerospace applications and is under evaluation for anomaly detection in vehicle and ground equipment for next generation launch systems. After an introduction to IMS application development, we discuss these NASA online monitoring applications, including the integration of IMS with complementary model-based and rule-based methods. Although the examples presented in this paper are from space operations applications, IMS is a general-purpose health-monitoring tool that is also applicable to power generation and transmission system monitoring.

THREE-DIMENSIONAL NAPL FATE AND TRANSPORT MODEL

EPA Science Inventory

We have added several new and significant capabilities to UTCHEM to make it into a general-purpose NAPL simulator. The simulator is now capable of modeling transient and steady-state three-dimensional flow and mass transport in the groundwater (saturated) and vadose (unsaturated...

Language acquisition is model-based rather than model-free.

PubMed

Wang, Felix Hao; Mintz, Toben H

2016-01-01

Christiansen & Chater (C&C) propose that learning language is learning to process language. However, we believe that the general-purpose prediction mechanism they propose is insufficient to account for many phenomena in language acquisition. We argue from theoretical considerations and empirical evidence that many acquisition tasks are model-based, and that different acquisition tasks require different, specialized models.

Summary of photovoltaic system performance models

NASA Technical Reports Server (NTRS)

Smith, J. H.; Reiter, L. J.

1984-01-01

A detailed overview of photovoltaics (PV) performance modeling capabilities developed for analyzing PV system and component design and policy issues is provided. A set of 10 performance models are selected which span a representative range of capabilities from generalized first order calculations to highly specialized electrical network simulations. A set of performance modeling topics and characteristics is defined and used to examine some of the major issues associated with photovoltaic performance modeling. Each of the models is described in the context of these topics and characteristics to assess its purpose, approach, and level of detail. The issues are discussed in terms of the range of model capabilities available and summarized in tabular form for quick reference. The models are grouped into categories to illustrate their purposes and perspectives.

A Chemical Containment Model for the General Purpose Work Station

NASA Technical Reports Server (NTRS)

Flippen, Alexis A.; Schmidt, Gregory K.

1994-01-01

Contamination control is a critical safety requirement imposed on experiments flying on board the Spacelab. The General Purpose Work Station, a Spacelab support facility used for life sciences space flight experiments, is designed to remove volatile compounds from its internal airpath and thereby minimize contamination of the Spacelab. This is accomplished through the use of a large, multi-stage filter known as the Trace Contaminant Control System. Many experiments planned for the Spacelab require the use of toxic, volatile fixatives in order to preserve specimens prior to postflight analysis. The NASA-Ames Research Center SLS-2 payload, in particular, necessitated the use of several toxic, volatile compounds in order to accomplish the many inflight experiment objectives of this mission. A model was developed based on earlier theories and calculations which provides conservative predictions of the resultant concentrations of these compounds given various spill scenarios. This paper describes the development and application of this model.

A Multilevel Study of Students' Motivations of Studying Accounting: Implications for Employers

ERIC Educational Resources Information Center

Law, Philip; Yuen, Desmond

2012-01-01

Purpose: The purpose of this study is to examine the influence of factors affecting students' choice of accounting as a study major in Hong Kong. Design/methodology/approach: Multinomial logistic regression and Hierarchical Generalized Linear Modeling (HGLM) are used to analyze the survey data for the level one and level two data, which is the…

Bringing MapReduce Closer To Data With Active Drives

NASA Astrophysics Data System (ADS)

Golpayegani, N.; Prathapan, S.; Warmka, R.; Wyatt, B.; Halem, M.; Trantham, J. D.; Markey, C. A.

2017-12-01

Moving computation closer to the data location has been a much theorized improvement to computation for decades. The increase in processor performance, the decrease in processor size and power requirement combined with the increase in data intensive computing has created a push to move computation as close to data as possible. We will show the next logical step in this evolution in computing: moving computation directly to storage. Hypothetical systems, known as Active Drives, have been proposed as early as 1998. These Active Drives would have a general-purpose CPU on each disk allowing for computations to be performed on them without the need to transfer the data to the computer over the system bus or via a network. We will utilize Seagate's Active Drives to perform general purpose parallel computing using the MapReduce programming model directly on each drive. We will detail how the MapReduce programming model can be adapted to the Active Drive compute model to perform general purpose computing with comparable results to traditional MapReduce computations performed via Hadoop. We will show how an Active Drive based approach significantly reduces the amount of data leaving the drive when performing several common algorithms: subsetting and gridding. We will show that an Active Drive based design significantly improves data transfer speeds into and out of drives compared to Hadoop's HDFS while at the same time keeping comparable compute speeds as Hadoop.

Multiphase, multicomponent phase behavior prediction

NASA Astrophysics Data System (ADS)

Dadmohammadi, Younas

Accurate prediction of phase behavior of fluid mixtures in the chemical industry is essential for designing and operating a multitude of processes. Reliable generalized predictions of phase equilibrium properties, such as pressure, temperature, and phase compositions offer an attractive alternative to costly and time consuming experimental measurements. The main purpose of this work was to assess the efficacy of recently generalized activity coefficient models based on binary experimental data to (a) predict binary and ternary vapor-liquid equilibrium systems, and (b) characterize liquid-liquid equilibrium systems. These studies were completed using a diverse binary VLE database consisting of 916 binary and 86 ternary systems involving 140 compounds belonging to 31 chemical classes. Specifically the following tasks were undertaken: First, a comprehensive assessment of the two common approaches (gamma-phi (gamma-ϕ) and phi-phi (ϕ-ϕ)) used for determining the phase behavior of vapor-liquid equilibrium systems is presented. Both the representation and predictive capabilities of these two approaches were examined, as delineated form internal and external consistency tests of 916 binary systems. For the purpose, the universal quasi-chemical (UNIQUAC) model and the Peng-Robinson (PR) equation of state (EOS) were used in this assessment. Second, the efficacy of recently developed generalized UNIQUAC and the nonrandom two-liquid (NRTL) for predicting multicomponent VLE systems were investigated. Third, the abilities of recently modified NRTL model (mNRTL2 and mNRTL1) to characterize liquid-liquid equilibria (LLE) phase conditions and attributes, including phase stability, miscibility, and consolute point coordinates, were assessed. The results of this work indicate that the ϕ-ϕ approach represents the binary VLE systems considered within three times the error of the gamma-ϕ approach. A similar trend was observed for the for the generalized model predictions using quantitative structure-property parameter generalizations (QSPR). For ternary systems, where all three constituent binary systems were available, the NRTL-QSPR, UNIQUAC-QSPR, and UNIFAC-6 models produce comparable accuracy. For systems where at least one constituent binary is missing, the UNIFAC-6 model produces larger errors than the QSPR generalized models. In general, the LLE characterization results indicate the accuracy of the modified models in reproducing the findings of the original NRTL model.

An Approach to Average Modeling and Simulation of Switch-Mode Systems

ERIC Educational Resources Information Center

Abramovitz, A.

2011-01-01

This paper suggests a pedagogical approach to teaching the subject of average modeling of PWM switch-mode power electronics systems through simulation by general-purpose electronic circuit simulators. The paper discusses the derivation of PSPICE/ORCAD-compatible average models of the switch-mode power stages, their software implementation, and…

Structural Model for Antisocial Behavior: Generalization to Single-Mother Families.

ERIC Educational Resources Information Center

Baldwin, David V.; Skinner, Martie L.

1989-01-01

The purpose of this study was to replicate the "basic training" structural model in Patterson's (1982) coercion theory, extending its scope to single-mother families with younger (six- to eight-year-old) boys. Significance of the successful replication was seen to lie in implications for the generalizability of the model across family…

A Platform for Learning Internet of Things

ERIC Educational Resources Information Center

Bogdanovic, Zorica; Simic, Konstantin; Milutinovic, Miloš; Radenkovic, Božidar; Despotovic-Zrakic, Marijana

2014-01-01

This paper presents a model for conducting Internet of Things (IoT) classes based on a web-service oriented cloud platform. The goal of the designed model is to provide university students with knowledge about IoT concepts, possibilities, and business models, and allow them to develop basic system prototypes using general-purpose microdevices and…

Methodical Approaches to Teaching of Computer Modeling in Computer Science Course

ERIC Educational Resources Information Center

Rakhimzhanova, B. Lyazzat; Issabayeva, N. Darazha; Khakimova, Tiyshtik; Bolyskhanova, J. Madina

2015-01-01

The purpose of this study was to justify of the formation technique of representation of modeling methodology at computer science lessons. The necessity of studying computer modeling is that the current trends of strengthening of general education and worldview functions of computer science define the necessity of additional research of the…

Design of RISC Processor Using VHDL and Cadence

NASA Astrophysics Data System (ADS)

Moslehpour, Saeid; Puliroju, Chandrasekhar; Abu-Aisheh, Akram

The project deals about development of a basic RISC processor. The processor is designed with basic architecture consisting of internal modules like clock generator, memory, program counter, instruction register, accumulator, arithmetic and logic unit and decoder. This processor is mainly used for simple general purpose like arithmetic operations and which can be further developed for general purpose processor by increasing the size of the instruction register. The processor is designed in VHDL by using Xilinx 8.1i version. The present project also serves as an application of the knowledge gained from past studies of the PSPICE program. The study will show how PSPICE can be used to simplify massive complex circuits designed in VHDL Synthesis. The purpose of the project is to explore the designed RISC model piece by piece, examine and understand the Input/ Output pins, and to show how the VHDL synthesis code can be converted to a simplified PSPICE model. The project will also serve as a collection of various research materials about the pieces of the circuit.

Validation of catchment models for predicting land-use and climate change impacts. 1. Method

NASA Astrophysics Data System (ADS)

Ewen, J.; Parkin, G.

1996-02-01

Computer simulation models are increasingly being proposed as tools capable of giving water resource managers accurate predictions of the impact of changes in land-use and climate. Previous validation testing of catchment models is reviewed, and it is concluded that the methods used do not clearly test a model's fitness for such a purpose. A new generally applicable method is proposed. This involves the direct testing of fitness for purpose, uses established scientific techniques, and may be implemented within a quality assured programme of work. The new method is applied in Part 2 of this study (Parkin et al., J. Hydrol., 175:595-613, 1996).

Generalized math model for simulation of high-altitude balloon systems

NASA Technical Reports Server (NTRS)

Nigro, N. J.; Elkouh, A. F.; Hinton, D. E.; Yang, J. K.

1985-01-01

Balloon systems have proved to be a cost-effective means for conducting research experiments (e.g., infrared astronomy) in the earth's atmosphere. The purpose of this paper is to present a generalized mathematical model that can be used to simulate the motion of these systems once they have attained float altitude. The resulting form of the model is such that the pendulation and spin motions of the system are uncoupled and can be analyzed independently. The model is evaluated by comparing the simulation results with data obtained from an actual balloon system flown by NASA.

Efficient polarimetric BRDF model.

PubMed

Renhorn, Ingmar G E; Hallberg, Tomas; Boreman, Glenn D

2015-11-30

The purpose of the present manuscript is to present a polarimetric bidirectional reflectance distribution function (BRDF) model suitable for hyperspectral and polarimetric signature modelling. The model is based on a further development of a previously published four-parameter model that has been generalized in order to account for different types of surface structures (generalized Gaussian distribution). A generalization of the Lambertian diffuse model is presented. The pBRDF-functions are normalized using numerical integration. Using directional-hemispherical reflectance (DHR) measurements, three of the four basic parameters can be determined for any wavelength. This simplifies considerably the development of multispectral polarimetric BRDF applications. The scattering parameter has to be determined from at least one BRDF measurement. The model deals with linear polarized radiation; and in similarity with e.g. the facet model depolarization is not included. The model is very general and can inherently model extreme surfaces such as mirrors and Lambertian surfaces. The complex mixture of sources is described by the sum of two basic models, a generalized Gaussian/Fresnel model and a generalized Lambertian model. Although the physics inspired model has some ad hoc features, the predictive power of the model is impressive over a wide range of angles and scattering magnitudes. The model has been applied successfully to painted surfaces, both dull and glossy and also on metallic bead blasted surfaces. The simple and efficient model should be attractive for polarimetric simulations and polarimetric remote sensing.

Training in Methods in Computational Neuroscience

DTIC Science & Technology

1992-08-29

in Tritonia. Roger Traub Models with realistic neurons , with an emphasis on large-scale modeling of epileptic phenomena in hippocampus. Rodolpho...Cell Model Plan: 1) Convert some of my simulations from NEURON to GENESIS (and thus learn GENESIS). 2) Develop a realistic inhibtory model . 3) Further...General Hospital, MA Course Project: Membrane Properties of a Neostriatal Neuron and Dopamine Modulation The purpose of my project was to model the

Extending the Diffuse Layer Model of Surface Acidity Behavior: III. Estimating Bound Site Activity Coefficients

EPA Science Inventory

Although detailed thermodynamic analyses of the 2-pK diffuse layer surface complexation model generally specify bound site activity coefficients for the purpose of accounting for those non-ideal excess free energies contributing to bound site electrochemical potentials, in applic...

MOUSE (MODULAR ORIENTED UNCERTAINTY SYSTEM): A COMPUTERIZED UNCERTAINTY ANALYSIS SYSTEM (FOR MICRO- COMPUTERS)

EPA Science Inventory

Environmental engineering calculations involving uncertainties; either in the model itself or in the data, are far beyond the capabilities of conventional analysis for any but the simplest of models. There exist a number of general-purpose computer simulation languages, using Mon...

A Note on the Equivalence between Observed and Expected Information Functions with Polytomous IRT Models

ERIC Educational Resources Information Center

Magis, David

2015-01-01

The purpose of this note is to study the equivalence of observed and expected (Fisher) information functions with polytomous item response theory (IRT) models. It is established that observed and expected information functions are equivalent for the class of divide-by-total models (including partial credit, generalized partial credit, rating…

Epistemology and the Curriculum: The Bio-Ecocultural Cognitive Spiral as Model.

ERIC Educational Resources Information Center

Gagne, Raymond C.

Described is a curriculum theory and construction within an epistemological model whose specific purpose is to serve as a general guide to the Amerindian peoples (Indians and Inuit) in their search for solutions to the problem of cultural survival. The model is also meant to have universal application, especially where there are cultures in…

Simulation Framework for Teaching in Modeling and Simulation Areas

ERIC Educational Resources Information Center

De Giusti, Marisa Raquel; Lira, Ariel Jorge; Villarreal, Gonzalo Lujan

2008-01-01

Simulation is the process of executing a model that describes a system with enough detail; this model has its entities, an internal state, some input and output variables and a list of processes bound to these variables. Teaching a simulation language such as general purpose simulation system (GPSS) is always a challenge, because of the way it…

Installation to Production of a Large-Scale General Purpose Graphics Processing Unit (GPGPU) Cluster at the U.S. Army Research Laboratory: Thufir

DTIC Science & Technology

2014-09-01

semiempirical and ray-optical models. For example, the semiempirical COST-Walfisch- Ikegami model (3) estimates the received power predominantly on the...Books: Philadelphia, PA, 1965. 2. Rick, T .; Mathur, R. Fast Edge-Diffraction-Based Radio Wave Propagation Model for Graphics Hardware. Proceedings of

A primer for biomedical scientists on how to execute model II linear regression analysis.

PubMed

Ludbrook, John

2012-04-01

1. There are two very different ways of executing linear regression analysis. One is Model I, when the x-values are fixed by the experimenter. The other is Model II, in which the x-values are free to vary and are subject to error. 2. I have received numerous complaints from biomedical scientists that they have great difficulty in executing Model II linear regression analysis. This may explain the results of a Google Scholar search, which showed that the authors of articles in journals of physiology, pharmacology and biochemistry rarely use Model II regression analysis. 3. I repeat my previous arguments in favour of using least products linear regression analysis for Model II regressions. I review three methods for executing ordinary least products (OLP) and weighted least products (WLP) regression analysis: (i) scientific calculator and/or computer spreadsheet; (ii) specific purpose computer programs; and (iii) general purpose computer programs. 4. Using a scientific calculator and/or computer spreadsheet, it is easy to obtain correct values for OLP slope and intercept, but the corresponding 95% confidence intervals (CI) are inaccurate. 5. Using specific purpose computer programs, the freeware computer program smatr gives the correct OLP regression coefficients and obtains 95% CI by bootstrapping. In addition, smatr can be used to compare the slopes of OLP lines. 6. When using general purpose computer programs, I recommend the commercial programs systat and Statistica for those who regularly undertake linear regression analysis and I give step-by-step instructions in the Supplementary Information as to how to use loss functions. © 2011 The Author. Clinical and Experimental Pharmacology and Physiology. © 2011 Blackwell Publishing Asia Pty Ltd.

The Impact of the University Students' Level of Alienation on Their Perception of General Satistaction

ERIC Educational Resources Information Center

Kaçire, Ilhan

2016-01-01

The purpose of this study is to investigate the impact of university students' level of alienation on their general satisfaction. The study was carried out using rational screening model. The total participants of this study were 551 Dicle University students, studying at Medical, Technology, and Ziya Gökalp Education Faculty departments. The…

Determination of Educational Needs and Self-Efficacy Perceptions of Special Education Teachers

ERIC Educational Resources Information Center

Ozcan, Deniz; Uzunboylu, Huseyin

2017-01-01

The purpose of this study is to analyse the need for curriculum development of special education teachers who work at special education centres and schools with resource rooms with regard to different variables and determine their perceptions of self-efficacy. In this study, a general survey model was employed that allows a general opinion about…

Problem-Based Learning in Web-Based Science Classroom.

ERIC Educational Resources Information Center

Kim, Heeyoung; Chung, Ji-Sook; Kim, Younghoon

The purpose of this paper is to discuss how general problem-based learning (PBL) models and social-constructivist perspectives are applied to the design and development of a Web-based science program, which emphasizes inquiry-based learning for fifth grade students. The paper also deals with the general features and learning process of a Web-based…

Teaching Behavioral Modeling and Simulation Techniques for Power Electronics Courses

ERIC Educational Resources Information Center

Abramovitz, A.

2011-01-01

This paper suggests a pedagogical approach to teaching the subject of behavioral modeling of switch-mode power electronics systems through simulation by general-purpose electronic circuit simulators. The methodology is oriented toward electrical engineering (EE) students at the undergraduate level, enrolled in courses such as "Power…

Investigating Island Evolution: A Galapagos-Based Lesson Using the 5E Instructional Model.

ERIC Educational Resources Information Center

DeFina, Anthony V.

2002-01-01

Introduces an inquiry-based lesson plan on evolution and the Galapagos Islands. Uses the 5E instructional model which includes phases of engagement, exploration, explanation, elaboration, and evaluation. Includes information on species for exploration and elaboration purposes, and a general rubric for student evaluation. (YDS)

A Storytelling Learning Model for Legal Education

ERIC Educational Resources Information Center

Capuano, Nicola; De Maio, Carmen; Gaeta, Angelo; Mangione, Giuseppina Rita; Salerno, Saverio; Fratesi, Eleonora

2014-01-01

The purpose of this paper is to describe a learning model based on "Storytelling" and its application in the context of legal education helping build challenging training resources that explain, to common citizens with little or no background about legal topics, concepts related to "Legal Mediation" in general and in specific…

A nurse-led model of chronic disease management in general practice: Patients' perspectives.

PubMed

Young, Jacqueline; Eley, Diann; Patterson, Elizabeth; Turner, Catherine

2016-12-01

Evidence suggests that current models of chronic disease management within general practice are not effective in meeting the needs of the community. The objective of this article is to examine patients' perceptions of a nurse-led collaborative model of care trialled in three general practices in Australia. This article reports on the second phase of a mixed-methods study in which semi-structured interviews with purposively selected patients were conducted to elicit information about their perceptions of nurse-led care. Three themes emerged from the data - time, ambiance and dimensions of the nurse role. The results suggest that general practice nurses had a positive impact on patients' ability to manage their chronic disease. This infers that there is scope for general practice nurses to expand their role in chronic disease management to assist patients to better self-manage their chronic diseases.

A generalized interval fuzzy mixed integer programming model for a multimodal transportation problem under uncertainty

NASA Astrophysics Data System (ADS)

Tian, Wenli; Cao, Chengxuan

2017-03-01

A generalized interval fuzzy mixed integer programming model is proposed for the multimodal freight transportation problem under uncertainty, in which the optimal mode of transport and the optimal amount of each type of freight transported through each path need to be decided. For practical purposes, three mathematical methods, i.e. the interval ranking method, fuzzy linear programming method and linear weighted summation method, are applied to obtain equivalents of constraints and parameters, and then a fuzzy expected value model is presented. A heuristic algorithm based on a greedy criterion and the linear relaxation algorithm are designed to solve the model.

Indoor Semi-volatile Organic Compounds (i-SVOC) Version 1.0

EPA Pesticide Factsheets

i-SVOC Version 1.0 is a general-purpose software application for dynamic modeling of the emission, transport, sorption, and distribution of semi-volatile organic compounds (SVOCs) in indoor environments.

Comparison of body composition between fashion models and women in general

PubMed Central

Park, Sunhee

2017-01-01

[Purpose] The present study compared the physical characteristics and body composition of professional fashion models and women in general, utilizing the skinfold test. [Methods] The research sample consisted of 90 professional fashion models presently active in Korea and 100 females in the general population, all selected through convenience sampling. Measurement was done following standardized methods and procedures set by the International Society for the Advancement of Kinanthropometry. Body density (mg/ mm) and body fat (%) were measured at the biceps, triceps, subscapular, and suprailiac areas. [Results] The results showed that the biceps, triceps, subscapular, and suprailiac areas of professional fashion models were significantly thinner than those of women in general (p<.001), and that their waist size was also significantly smaller (p<.001). However, hip circumference showed no significant difference. Body mass index, waist-to-hip ratio, and body fat (%) in professional fashion models were significantly lower than those in women in general (p<.001), while the body density in professional fashion models was significantly greater (p<.001). [Conclusion] Body density in professional fashion models is higher, due to taller stature, than in women in general. Moreover, there is an effort on the part of fashion models to lose weight in order to maintain a thin body and a low weight for occupational reasons. PMID:29370670

Testing and Analytical Modeling for Purging Process of a Cryogenic Line

NASA Technical Reports Server (NTRS)

Hedayat, A.; Mazurkivich, P. V.; Nelson, M. A.; Majumdar, A. K.

2015-01-01

To gain confidence in developing analytical models of the purging process for the cryogenic main propulsion systems of upper stage, two test series were conducted. Test article, a 3.35m long with the diameter of 20 cm incline line, was filled with liquid (LH2)or gaseous hydrogen (GH2) and then purged with gaseous helium (GHe). Total of 10 tests were conducted. Influences of GHe flow rates and initial temperatures were evaluated. Generalized Fluid System Simulation Program (GFSSP), an in-house general-purpose fluid system analyzer, was utilized to model and simulate selective tests.

No-reference image quality assessment based on natural scene statistics and gradient magnitude similarity

NASA Astrophysics Data System (ADS)

Jia, Huizhen; Sun, Quansen; Ji, Zexuan; Wang, Tonghan; Chen, Qiang

2014-11-01

The goal of no-reference/blind image quality assessment (NR-IQA) is to devise a perceptual model that can accurately predict the quality of a distorted image as human opinions, in which feature extraction is an important issue. However, the features used in the state-of-the-art "general purpose" NR-IQA algorithms are usually natural scene statistics (NSS) based or are perceptually relevant; therefore, the performance of these models is limited. To further improve the performance of NR-IQA, we propose a general purpose NR-IQA algorithm which combines NSS-based features with perceptually relevant features. The new method extracts features in both the spatial and gradient domains. In the spatial domain, we extract the point-wise statistics for single pixel values which are characterized by a generalized Gaussian distribution model to form the underlying features. In the gradient domain, statistical features based on neighboring gradient magnitude similarity are extracted. Then a mapping is learned to predict quality scores using a support vector regression. The experimental results on the benchmark image databases demonstrate that the proposed algorithm correlates highly with human judgments of quality and leads to significant performance improvements over state-of-the-art methods.

Investigating the Digital Addiction Level of the University Students According to Their Purposes for Using Digital Tools

ERIC Educational Resources Information Center

Kesici, Ahmet; Tunç, Nazenin Fidan

2018-01-01

This study was carried out to investigate the digital addiction (DA) level of the university students according to their purposes for using digital tools. 527 students studying at the faculties of education of Erzincan, Dicle, and Siirt Universities participated this study in which general survey model was used. A form was used to reveal for which…

An overview of longitudinal data analysis methods for neurological research.

PubMed

Locascio, Joseph J; Atri, Alireza

2011-01-01

The purpose of this article is to provide a concise, broad and readily accessible overview of longitudinal data analysis methods, aimed to be a practical guide for clinical investigators in neurology. In general, we advise that older, traditional methods, including (1) simple regression of the dependent variable on a time measure, (2) analyzing a single summary subject level number that indexes changes for each subject and (3) a general linear model approach with a fixed-subject effect, should be reserved for quick, simple or preliminary analyses. We advocate the general use of mixed-random and fixed-effect regression models for analyses of most longitudinal clinical studies. Under restrictive situations or to provide validation, we recommend: (1) repeated-measure analysis of covariance (ANCOVA), (2) ANCOVA for two time points, (3) generalized estimating equations and (4) latent growth curve/structural equation models.

Response to Intervention vs. Severe Discrepancy Model: Identification of Students with Specific Learning Disabilities

ERIC Educational Resources Information Center

Armendariz, Gina; Jung, Adrian

2016-01-01

The purpose of this study was to investigate the perceptions of educators on the acceptance of either the Response to Intervention (RTI) model or the Severe Discrepancy (SD) model in the identification of students with a SLD. The study consisted of 160 general education (GE) teachers and 119 special education (SPED) teachers. The study used a…

Examining Teacher Mental Models for the Implementation of a STEM-Focused Curriculum Paradigm in Engineering and Technology Education

ERIC Educational Resources Information Center

Kerr, Janel M.

2013-01-01

The purpose of this study was to explore the role of mental models in Idaho's Engineering and Technology Education teachers' in decision making when faced with major curriculum changes. Senge (1990) defined mental models as, "deeply ingrained assumptions, generalizations, or even pictures or images that influence how we understand the world…

Efficient Simulation of Secondary Fluorescence Via NIST DTSA-II Monte Carlo.

PubMed

Ritchie, Nicholas W M

2017-06-01

Secondary fluorescence, the final term in the familiar matrix correction triumvirate Z·A·F, is the most challenging for Monte Carlo models to simulate. In fact, only two implementations of Monte Carlo models commonly used to simulate electron probe X-ray spectra can calculate secondary fluorescence-PENEPMA and NIST DTSA-II a (DTSA-II is discussed herein). These two models share many physical models but there are some important differences in the way each implements X-ray emission including secondary fluorescence. PENEPMA is based on PENELOPE, a general purpose software package for simulation of both relativistic and subrelativistic electron/positron interactions with matter. On the other hand, NIST DTSA-II was designed exclusively for simulation of X-ray spectra generated by subrelativistic electrons. NIST DTSA-II uses variance reduction techniques unsuited to general purpose code. These optimizations help NIST DTSA-II to be orders of magnitude more computationally efficient while retaining detector position sensitivity. Simulations execute in minutes rather than hours and can model differences that result from detector position. Both PENEPMA and NIST DTSA-II are capable of handling complex sample geometries and we will demonstrate that both are of similar accuracy when modeling experimental secondary fluorescence data from the literature.

A qualitative study of patient experiences of Type 2 Diabetes care delivered comparatively by General Practice Nurses and Medical Practitioners.

PubMed

Boyle, Eileen; Saunders, Rosemary; Drury, Vicki

2016-07-01

To explore patient experiences of type 2 diabetes mellitus care delivered by general practice nurses in collaboration with the general practitioner. Australian general practice nurses are expanding their role in multidisciplinary type 2 diabetes care with limited research on patient perceptions of care provision within this collaborative model. Qualitative interpretive. Purposeful sampling was used to invite the patients (n = 10). Data were collected from semi-structured face-to-face interviews. Braun and Clarke's () inductive coding thematic analysis process was used to interpret the data. All participants experienced their General Practice Nurse consultation as a clinical assessment for their General Practitioner. While they appreciated the extra time with the General Practice Nurse, they were unsure of the purpose of the consultation beyond clinical assessment. They described the ongoing challenge of living with T2DM and identified a need for additional information and advice. The results suggest that the model of general practice nurse type 2 diabetes care has an important role to play in the delivery of effective ongoing care of patients. However, this role requires further development to ensure that it is understood by the patients as a role that not only conducts clinical assessments but also provides relevant education and self-management support as part of a collaborative approach to care delivery with General Practitioners. The findings are relevant to primary health care clinicians providing diabetes care to inform more relevant supportive care by general practice nurses. © 2016 John Wiley & Sons Ltd.

High Precision Thermal, Structural and Optical Analysis of an External Occulter Using a Common Model and the General Purpose Multi-Physics Analysis Tool Cielo

NASA Technical Reports Server (NTRS)

Hoff, Claus; Cady, Eric; Chainyk, Mike; Kissil, Andrew; Levine, Marie; Moore, Greg

2011-01-01

The efficient simulation of multidisciplinary thermo-opto-mechanical effects in precision deployable systems has for years been limited by numerical toolsets that do not necessarily share the same finite element basis, level of mesh discretization, data formats, or compute platforms. Cielo, a general purpose integrated modeling tool funded by the Jet Propulsion Laboratory and the Exoplanet Exploration Program, addresses shortcomings in the current state of the art via features that enable the use of a single, common model for thermal, structural and optical aberration analysis, producing results of greater accuracy, without the need for results interpolation or mapping. This paper will highlight some of these advances, and will demonstrate them within the context of detailed external occulter analyses, focusing on in-plane deformations of the petal edges for both steady-state and transient conditions, with subsequent optical performance metrics including intensity distributions at the pupil and image plane.

Trends in Programming Languages for Neuroscience Simulations

PubMed Central

Davison, Andrew P.; Hines, Michael L.; Muller, Eilif

2009-01-01

Neuroscience simulators allow scientists to express models in terms of biological concepts, without having to concern themselves with low-level computational details of their implementation. The expressiveness, power and ease-of-use of the simulator interface is critical in efficiently and accurately translating ideas into a working simulation. We review long-term trends in the development of programmable simulator interfaces, and examine the benefits of moving from proprietary, domain-specific languages to modern dynamic general-purpose languages, in particular Python, which provide neuroscientists with an interactive and expressive simulation development environment and easy access to state-of-the-art general-purpose tools for scientific computing. PMID:20198154

Trends in programming languages for neuroscience simulations.

PubMed

Davison, Andrew P; Hines, Michael L; Muller, Eilif

2009-01-01

Neuroscience simulators allow scientists to express models in terms of biological concepts, without having to concern themselves with low-level computational details of their implementation. The expressiveness, power and ease-of-use of the simulator interface is critical in efficiently and accurately translating ideas into a working simulation. We review long-term trends in the development of programmable simulator interfaces, and examine the benefits of moving from proprietary, domain-specific languages to modern dynamic general-purpose languages, in particular Python, which provide neuroscientists with an interactive and expressive simulation development environment and easy access to state-of-the-art general-purpose tools for scientific computing.

Multi-Population Invariance with Dichotomous Measures: Combining Multi-Group and MIMIC Methodologies in Evaluating the General Aptitude Test in the Arabic Language

ERIC Educational Resources Information Center

Sideridis, Georgios D.; Tsaousis, Ioannis; Al-harbi, Khaleel A.

2015-01-01

The purpose of the present study was to extend the model of measurement invariance by simultaneously estimating invariance across multiple populations in the dichotomous instrument case using multi-group confirmatory factor analytic and multiple indicator multiple causes (MIMIC) methodologies. Using the Arabic version of the General Aptitude Test…

[Relationships between suicide attitudes and perception of life purpose and meaning of life in college students].

PubMed

Xie, Xingli; Zou, Bing; Huang, Zhongyan

2012-10-01

To investigate the suicide attitudes of college students and analyze the impact of the perception of life purpose and meaning of life on their suicide attitudes using structural equation modeling. A total of 1050 college students were tested by Suicide Attitude Questionnaire (QSA), Purpose in Life test (PIL) and Chinese version of Meaning of Life questionnaire (C-MLQ). A theoretical model was established for confirming the influence of the purpose in life and meaning in life on suicide attitudes of the college students. The college students had generally a negative attitude towards suicide. The female students tended to show more objective attitudes towards suicide and the students from rural areas had a stronger attitude against euthanasia.The meanings and purposes in life were closely correlated with the attitudes towards suicide, and the structural equation modeling well fitted the data (Χ(2)/df=1.924, GFI=0.936, AGFI=0.915, NFI=0.937, CFI=0.940, and RMSEA=0.045). The perception of meaning and purposes in life had a direct predictive value on the suicide attitude of the college students, and the presumptions derived from the theoretical model were strongly supported by structural equation modeling. The perceptions in meanings in life and purposes in livelihood have important influence on the suicide attitudes of college students, and intervention with effective life education should be administered to guide the suicide attitude of the college students.

The Complex Nature of Opening Reference Questions

ERIC Educational Resources Information Center

Eichman, Thomas Lee

1978-01-01

The purpose of this study is to review communication theory models and some of the literature from philosophy and linguistics in an attempt to supply a rational explanation for the generality of opening reference questions. (Author)

Modelling Question Difficulty in an A Level Physics Examination

ERIC Educational Resources Information Center

Crisp, Victoria; Grayson, Rebecca

2013-01-01

"Item difficulty modelling" is a technique used for a number of purposes such as to support future item development, to explore validity in relation to the constructs that influence difficulty and to predict the difficulty of items. This research attempted to explore the factors influencing question difficulty in a general qualification…

Using Mathematics, Mathematical Applications, Mathematical Modelling, and Mathematical Literacy: A Theoretical Study

ERIC Educational Resources Information Center

Mumcu, Hayal Yavuz

2016-01-01

The purpose of this theoretical study is to explore the relationships between the concepts of using mathematics in the daily life, mathematical applications, mathematical modelling, and mathematical literacy. As these concepts are generally taken as independent concepts in the related literature, they are confused with each other and it becomes…

Views of Educators about Organic School Which Is an Alternative Model in Education

ERIC Educational Resources Information Center

Turan, Mehmet; Caliskan, Emir Feridun

2018-01-01

The purpose of this research is to identify the general opinions of the educators on the Organic School Model (education inspectors, academicians, school administrators, primary and preschool teachers). The research was designed within the framework of qualitative research approach and phenomenology method, which is one of the qualitative research…

Modeling the Time-Varying Nature of Student Exceptionality Classification on Achievement Growth

ERIC Educational Resources Information Center

Nese, Joseph F. T.; Stevens, Joseph J.; Schulte, Ann C.; Tindal, Gerald; Elliott, Stephen N.

2017-01-01

Our purpose was to examine different approaches to modeling the time-varying nature of exceptionality classification. Using longitudinal data from one state's mathematics achievement test for 28,829 students in Grades 3 to 8, we describe the reclassification rate within special education and between general and special education, and compare four…

An Analysis of Context-Aware Data Models for Smart Cities: Towards Fiware and Etsi Cim Emerging Data Model

NASA Astrophysics Data System (ADS)

Jara, A. J.; Bocchi, Y.; Fernandez, D.; Molina, G.; Gomez, A.

2017-09-01

Smart Cities requires the support of context-aware and enriched semantic descriptions to support a scalable and cross-domain development of smart applications. For example, nowadays general purpose sensors such as crowd monitoring (counting people in an area), environmental information (pollution, air quality, temperature, humidity, noise) etc. can be used in multiple solutions with different objectives. For that reason, a data model that offers advanced capabilities for the description of context is required. This paper presents an overview of the available technologies for this purpose and how it is being addressed by the Open and Agile Smart Cities principles and FIWARE platform through the data models defined by the ETSI ISG Context Information Management (ETSI CIM).

Appliance Servicing Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents the standard appliance servicing technician curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard…

IFEMS, an Interactive Finite Element Modeling System Using a CAD/CAM System

NASA Technical Reports Server (NTRS)

Mckellip, S.; Schuman, T.; Lauer, S.

1980-01-01

A method of coupling a CAD/CAM system with a general purpose finite element mesh generator is described. The three computer programs which make up the interactive finite element graphics system are discussed.

MSC products for the simulation of tire behavior

NASA Technical Reports Server (NTRS)

Muskivitch, John C.

1995-01-01

The modeling of tires and the simulation of tire behavior are complex problems. The MacNeal-Schwendler Corporation (MSC) has a number of finite element analysis products that can be used to address the complexities of tire modeling and simulation. While there are many similarities between the products, each product has a number of capabilities that uniquely enable it to be used for a specific aspect of tire behavior. This paper discusses the following programs: (1) MSC/NASTRAN - general purpose finite element program for linear and nonlinear static and dynamic analysis; (2) MSC/ADAQUS - nonlinear statics and dynamics finite element program; (3) MSC/PATRAN AFEA (Advanced Finite Element Analysis) - general purpose finite element program with a subset of linear and nonlinear static and dynamic analysis capabilities with an integrated version of MSC/PATRAN for pre- and post-processing; and (4) MSC/DYTRAN - nonlinear explicit transient dynamics finite element program.

Explicit robust schemes for implementation of general principal value-based constitutive models

NASA Technical Reports Server (NTRS)

Arnold, S. M.; Saleeb, A. F.; Tan, H. Q.; Zhang, Y.

1993-01-01

The issue of developing effective and robust schemes to implement general hyperelastic constitutive models is addressed. To this end, special purpose functions are used to symbolically derive, evaluate, and automatically generate the associated FORTRAN code for the explicit forms of the corresponding stress function and material tangent stiffness tensors. These explicit forms are valid for the entire deformation range. The analytical form of these explicit expressions is given here for the case in which the strain-energy potential is taken as a nonseparable polynomial function of the principle stretches.

7 CFR 2902.48 - General purpose household cleaners.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PROCUREMENT Designated Items § 2902.48 General purpose household cleaners. (a) Definition. Products designed... procurement preference for qualifying biobased general purpose household cleaners. By that date, Federal... 7 Agriculture 15 2010-01-01 2010-01-01 false General purpose household cleaners. 2902.48 Section...

Testing and Analytical Modeling for Purging Process of a Cryogenic Line

NASA Technical Reports Server (NTRS)

Hedayat, A.; Mazurkivich, P. V.; Nelson, M. A.; Majumdar, A. K.

2015-01-01

To gain confidence in developing analytical models of the purging process for the cryogenic main propulsion systems of upper stage, two test series were conducted. The test article, a 3.35 m long with the diameter of 20 cm incline line, was filled with liquid or gaseous hydrogen and then purged with gaseous helium (GHe). Total of 10 tests were conducted. The influences of GHe flow rates and initial temperatures were evaluated. The Generalized Fluid System Simulation Program (GFSSP), an in-house general-purpose fluid system analyzer computer program, was utilized to model and simulate selective tests. The test procedures, modeling descriptions, and the results are presented in the following sections.

Testing and Analytical Modeling for Purging Process of a Cryogenic Line

NASA Technical Reports Server (NTRS)

Hedayat, A.; Mazurkivich, P. V.; Nelson, M. A.; Majumdar, A. K.

2013-01-01

To gain confidence in developing analytical models of the purging process for the cryogenic main propulsion systems of upper stage, two test series were conducted. The test article, a 3.35 m long with the diameter of 20 cm incline line, was filled with liquid or gaseous hydrogen and then purged with gaseous helium (GHe). Total of 10 tests were conducted. The influences of GHe flow rates and initial temperatures were evaluated. The Generalized Fluid System Simulation Program (GFSSP), an in-house general-purpose fluid system analyzer computer program, was utilized to model and simulate selective tests. The test procedures, modeling descriptions, and the results are presented in the following sections.

No Vent Tank Fill and Transfer Line Chilldown Analysis by Generalized Fluid System Simulation Program (GFSSP)

NASA Technical Reports Server (NTRS)

Majumdar, Alok

2013-01-01

The purpose of the paper is to present the analytical capability developed to model no vent chill and fill of cryogenic tank to support CPST (Cryogenic Propellant Storage and Transfer) program. Generalized Fluid System Simulation Program (GFSSP) was adapted to simulate charge-holdvent method of Tank Chilldown. GFSSP models were developed to simulate chilldown of LH2 tank in K-site Test Facility and numerical predictions were compared with test data. The report also describes the modeling technique of simulating the chilldown of a cryogenic transfer line and GFSSP models were developed to simulate the chilldown of a long transfer line and compared with test data.

An Overview of Longitudinal Data Analysis Methods for Neurological Research

PubMed Central

Locascio, Joseph J.; Atri, Alireza

2011-01-01

The purpose of this article is to provide a concise, broad and readily accessible overview of longitudinal data analysis methods, aimed to be a practical guide for clinical investigators in neurology. In general, we advise that older, traditional methods, including (1) simple regression of the dependent variable on a time measure, (2) analyzing a single summary subject level number that indexes changes for each subject and (3) a general linear model approach with a fixed-subject effect, should be reserved for quick, simple or preliminary analyses. We advocate the general use of mixed-random and fixed-effect regression models for analyses of most longitudinal clinical studies. Under restrictive situations or to provide validation, we recommend: (1) repeated-measure analysis of covariance (ANCOVA), (2) ANCOVA for two time points, (3) generalized estimating equations and (4) latent growth curve/structural equation models. PMID:22203825

78 FR 77662 - Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... (NOA) for General Purpose Warehouse and Information Technology Center Construction (GPW/IT)--Tracy Site.... ACTION: Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center... FR 65300) announcing the publication of the General Purpose Warehouse and Information Technology...

Evaluation of Generalized Performance across Materials When Using Video Technology by Students with Autism Spectrum Disorder and Moderate Intellectual Disability

ERIC Educational Resources Information Center

Mechling, Linda C.; Ayres, Kevin M.; Foster, Ashley L.; Bryant, Kathryn J.

2015-01-01

The purpose of this study was to evaluate the ability of four high school-aged students with a diagnosis of autism spectrum disorder and moderate intellectual disability to generalize performance of skills when using materials different from those presented through video models. An adapted alternating treatments design was used to evaluate student…

GSTAR-SUR Modeling With Calendar Variations And Intervention To Forecast Outflow Of Currencies In Java Indonesia

NASA Astrophysics Data System (ADS)

Akbar, M. S.; Setiawan; Suhartono; Ruchjana, B. N.; Riyadi, M. A. A.

2018-03-01

Ordinary Least Squares (OLS) is general method to estimates Generalized Space Time Autoregressive (GSTAR) parameters. But in some cases, the residuals of GSTAR are correlated between location. If OLS is applied to this case, then the estimators are inefficient. Generalized Least Squares (GLS) is a method used in Seemingly Unrelated Regression (SUR) model. This method estimated parameters of some models with residuals between equations are correlated. Simulation study shows that GSTAR with GLS method for estimating parameters (GSTAR-SUR) is more efficient than GSTAR-OLS method. The purpose of this research is to apply GSTAR-SUR with calendar variation and intervention as exogenous variable (GSTARX-SUR) for forecast outflow of currency in Java, Indonesia. As a result, GSTARX-SUR provides better performance than GSTARX-OLS.

Optimisation of a parallel ocean general circulation model

NASA Astrophysics Data System (ADS)

Beare, M. I.; Stevens, D. P.

1997-10-01

This paper presents the development of a general-purpose parallel ocean circulation model, for use on a wide range of computer platforms, from traditional scalar machines to workstation clusters and massively parallel processors. Parallelism is provided, as a modular option, via high-level message-passing routines, thus hiding the technical intricacies from the user. An initial implementation highlights that the parallel efficiency of the model is adversely affected by a number of factors, for which optimisations are discussed and implemented. The resulting ocean code is portable and, in particular, allows science to be achieved on local workstations that could otherwise only be undertaken on state-of-the-art supercomputers.

General model and control of an n rotor helicopter

NASA Astrophysics Data System (ADS)

Sidea, A. G.; Yding Brogaard, R.; Andersen, N. A.; Ravn, O.

2014-12-01

The purpose of this study was to create a dynamic, nonlinear mathematical model of a multirotor that would be valid for different numbers of rotors. Furthermore, a set of Single Input Single Output (SISO) controllers were implemented for attitude control. Both model and controllers were tested experimentally on a quadcopter. Using the combined model and controllers, simple system simulation and control is possible, by replacing the physical values for the individual systems.

Extracting Spurious Latent Classes in Growth Mixture Modeling with Nonnormal Errors

ERIC Educational Resources Information Center

Guerra-Peña, Kiero; Steinley, Douglas

2016-01-01

Growth mixture modeling is generally used for two purposes: (1) to identify mixtures of normal subgroups and (2) to approximate oddly shaped distributions by a mixture of normal components. Often in applied research this methodology is applied to both of these situations indistinctly: using the same fit statistics and likelihood ratio tests. This…

Designing and Developing a Blended Course: Toward Best Practices for Japanese Learners

ERIC Educational Resources Information Center

Mehran, Parisa; Alizadeh, Mehrasa; Koguchi, Ichiro; Takemura, Haruo

2017-01-01

This paper outlines the iterative stages involved in designing and developing a blended course of English for General Academic Purposes (EGAP) at Osaka University. First, the basic Successive Approximation Model (SAM 1) is introduced as the guiding instructional design model upon which the course was created. Afterward, the stages of design and…

A Biomechanical Modeling Study of the Effects of the Orbicularis Oris Muscle and Jaw Posture on Lip Shape

ERIC Educational Resources Information Center

Stavness, Ian; Nazari, Mohammad Ali; Perrier, Pascal; Demolin, Didier; Payan, Yohan

2013-01-01

Purpose: The authors' general aim is to use biomechanical models of speech articulators to explore how possible variations in anatomical structure contribute to differences in articulatory strategies and phone systems across human populations. Specifically, they investigated 2 issues: (a) the link between lip muscle anatomy and variability in…

The Attributive Theory of Quality: A Model for Quality Measurement in Higher Education.

ERIC Educational Resources Information Center

Afshar, Arash

A theoretical basis for defining and measuring the quality of institutions of higher education, namely for accreditation purposes, is developed. The theory, the Attributive Theory of Quality, is illustrated using a calculation model that is based on general systems theory. The theory postulates that quality only exists in relation to the…

Estimation of Item Parameters and the GEM Algorithm.

ERIC Educational Resources Information Center

Tsutakawa, Robert K.

The models and procedures discussed in this paper are related to those presented in Bock and Aitkin (1981), where they considered the 2-parameter probit model and approximated a normally distributed prior distribution of abilities by a finite and discrete distribution. One purpose of this paper is to clarify the nature of the general EM (GEM)…

Alternative Measurement Paradigms for Measuring Executive Functions: SEM (Formative and Reflective Models) and IRT (Rasch Models)

ERIC Educational Resources Information Center

Engelhard, George, Jr.; Wang, Jue

2014-01-01

The authors of the Focus article pose important questions regarding whether or not performance-based tasks related to executive functioning are best viewed as reflective or formative indicators. Miyake and Friedman (2012) define executive functioning (EF) as "a set of general-purpose control mechanisms, often linked to the prefrontal cortex…

Applying knowledge compilation techniques to model-based reasoning

NASA Technical Reports Server (NTRS)

Keller, Richard M.

1991-01-01

Researchers in the area of knowledge compilation are developing general purpose techniques for improving the efficiency of knowledge-based systems. In this article, an attempt is made to define knowledge compilation, to characterize several classes of knowledge compilation techniques, and to illustrate how some of these techniques can be applied to improve the performance of model-based reasoning systems.

Biotechnology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program quide presents the biotechnology curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard curriculum sequence and lists of…

Evaluation of Planetary Boundary Layer Scheme Sensitivities for the Purpose of Parameter Estimation

EPA Science Inventory

Meteorological model errors caused by imperfect parameterizations generally cannot be overcome simply by optimizing initial and boundary conditions. However, advanced data assimilation methods are capable of extracting significant information about parameterization behavior from ...

Civil Engineering Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents civil engineering technology curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard curriculum sequence and…

Atomicrex—a general purpose tool for the construction of atomic interaction models

NASA Astrophysics Data System (ADS)

Stukowski, Alexander; Fransson, Erik; Mock, Markus; Erhart, Paul

2017-07-01

We introduce atomicrex, an open-source code for constructing interatomic potentials as well as more general types of atomic-scale models. Such effective models are required to simulate extended materials structures comprising many thousands of atoms or more, because electronic structure methods become computationally too expensive at this scale. atomicrex covers a wide range of interatomic potential types and fulfills many needs in atomistic model development. As inputs, it supports experimental property values as well as ab initio energies and forces, to which models can be fitted using various optimization algorithms. The open architecture of atomicrex allows it to be used in custom model development scenarios beyond classical interatomic potentials while thanks to its Python interface it can be readily integrated e.g., with electronic structure calculations or machine learning algorithms.

Fast model updating coupling Bayesian inference and PGD model reduction

NASA Astrophysics Data System (ADS)

Rubio, Paul-Baptiste; Louf, François; Chamoin, Ludovic

2018-04-01

The paper focuses on a coupled Bayesian-Proper Generalized Decomposition (PGD) approach for the real-time identification and updating of numerical models. The purpose is to use the most general case of Bayesian inference theory in order to address inverse problems and to deal with different sources of uncertainties (measurement and model errors, stochastic parameters). In order to do so with a reasonable CPU cost, the idea is to replace the direct model called for Monte-Carlo sampling by a PGD reduced model, and in some cases directly compute the probability density functions from the obtained analytical formulation. This procedure is first applied to a welding control example with the updating of a deterministic parameter. In the second application, the identification of a stochastic parameter is studied through a glued assembly example.

Deictic primitives for general purpose navigation

NASA Technical Reports Server (NTRS)

Crismann, Jill D.

1994-01-01

A visually-based deictic primative used as an elementary command set for general purpose navigation was investigated. It was shown that a simple 'follow your eyes' scenario is sufficient for tracking a moving target. Limitations of velocity, acceleration, and modeling of the response of the mechanical systems were enforced. Realistic paths of the robots were produced during the simulation. Scientists could remotely command a planetary rover to go to a particular rock formation that may be interesting. Similarly an expert at plant maintenance could obtain diagnostic information remotely by using deictic primitives on a mobile are used in the deictic primitives, we could imagine that the exact same control software could be used for all of these applications.

General purpose graphics-processing-unit implementation of cosmological domain wall network evolution.

PubMed

Correia, J R C C C; Martins, C J A P

2017-10-01

Topological defects unavoidably form at symmetry breaking phase transitions in the early universe. To probe the parameter space of theoretical models and set tighter experimental constraints (exploiting the recent advances in astrophysical observations), one requires more and more demanding simulations, and therefore more hardware resources and computation time. Improving the speed and efficiency of existing codes is essential. Here we present a general purpose graphics-processing-unit implementation of the canonical Press-Ryden-Spergel algorithm for the evolution of cosmological domain wall networks. This is ported to the Open Computing Language standard, and as a consequence significant speedups are achieved both in two-dimensional (2D) and 3D simulations.

The Effects of Duration of Exposure to the REAPS Model in Developing Students' General Creativity and Creative Problem Solving in Science

ERIC Educational Resources Information Center

Alhusaini, Abdulnasser Alashaal F.

2016-01-01

The Real Engagement in Active Problem Solving (REAPS) model was developed in 2004 by C. June Maker and colleagues as an intervention for gifted students to develop creative problem solving ability through the use of real-world problems. The primary purpose of this study was to examine the effects of the REAPS model on developing students' general…

An Inexpensive Robotics Laboratory.

ERIC Educational Resources Information Center

Inigo, R. M.; Angulo, J. M.

1985-01-01

Describes the design and implementation of a simple robot manipulator. The manipulator has three degrees of freedom and is controlled by a general purpose microcomputer. The basis for the manipulator (which costs under $100) is a simple working model of a crane. (Author/JN)

Screamer version 4.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spielman, Rick; Struve, Kenneth W.; Kiefer, Mark L.

2017-02-16

Screamer is a special purpose circuit code developed for the design of Pulsed Power systems. It models electrical circuits which have a restricted topology in order to provide a fast-running tool while still allowing configurations general enough for most Pulsed Power system designs

Real-time simulation of a spiking neural network model of the basal ganglia circuitry using general purpose computing on graphics processing units.

PubMed

Igarashi, Jun; Shouno, Osamu; Fukai, Tomoki; Tsujino, Hiroshi

2011-11-01

Real-time simulation of a biologically realistic spiking neural network is necessary for evaluation of its capacity to interact with real environments. However, the real-time simulation of such a neural network is difficult due to its high computational costs that arise from two factors: (1) vast network size and (2) the complicated dynamics of biologically realistic neurons. In order to address these problems, mainly the latter, we chose to use general purpose computing on graphics processing units (GPGPUs) for simulation of such a neural network, taking advantage of the powerful computational capability of a graphics processing unit (GPU). As a target for real-time simulation, we used a model of the basal ganglia that has been developed according to electrophysiological and anatomical knowledge. The model consists of heterogeneous populations of 370 spiking model neurons, including computationally heavy conductance-based models, connected by 11,002 synapses. Simulation of the model has not yet been performed in real-time using a general computing server. By parallelization of the model on the NVIDIA Geforce GTX 280 GPU in data-parallel and task-parallel fashion, faster-than-real-time simulation was robustly realized with only one-third of the GPU's total computational resources. Furthermore, we used the GPU's full computational resources to perform faster-than-real-time simulation of three instances of the basal ganglia model; these instances consisted of 1100 neurons and 33,006 synapses and were synchronized at each calculation step. Finally, we developed software for simultaneous visualization of faster-than-real-time simulation output. These results suggest the potential power of GPGPU techniques in real-time simulation of realistic neural networks. Copyright © 2011 Elsevier Ltd. All rights reserved.

The School Adjustment of Students in Distinct Risk Configurations: Considerations for the Development of Selected and Indicated Interventions

ERIC Educational Resources Information Center

Petrin, Robert A.

2011-01-01

As indicated in papers 2 and 3 of this symposium and in published research from Project REAL, there is clear evidence that the SEALS model has a general positive impact on the school context during the early adolescent years. The purpose of this study was to identify key process factors that support gains to academic outcomes in general, but…

PAN AIR modeling studies. [higher order panel method for aircraft design

NASA Technical Reports Server (NTRS)

Towne, M. C.; Strande, S. M.; Erickson, L. L.; Kroo, I. M.; Enomoto, F. Y.; Carmichael, R. L.; Mcpherson, K. F.

1983-01-01

PAN AIR is a computer program that predicts subsonic or supersonic linear potential flow about arbitrary configurations. The code's versatility and generality afford numerous possibilities for modeling flow problems. Although this generality provides great flexibility, it also means that studies are required to establish the dos and don'ts of modeling. The purpose of this paper is to describe and evaluate a variety of methods for modeling flows with PAN AIR. The areas discussed are effects of panel density, internal flow modeling, forebody modeling in subsonic flow, propeller slipstream modeling, effect of wake length, wing-tail-wake interaction, effect of trailing-edge paneling on the Kutta condition, well- and ill-posed boundary-value problems, and induced-drag calculations. These nine topics address problems that are of practical interest to the users of PAN AIR.

Predicting oropharyngeal tumor volume throughout the course of radiation therapy from pretreatment computed tomography data using general linear models.

PubMed

Yock, Adam D; Rao, Arvind; Dong, Lei; Beadle, Beth M; Garden, Adam S; Kudchadker, Rajat J; Court, Laurence E

2014-05-01

The purpose of this work was to develop and evaluate the accuracy of several predictive models of variation in tumor volume throughout the course of radiation therapy. Nineteen patients with oropharyngeal cancers were imaged daily with CT-on-rails for image-guided alignment per an institutional protocol. The daily volumes of 35 tumors in these 19 patients were determined and used to generate (1) a linear model in which tumor volume changed at a constant rate, (2) a general linear model that utilized the power fit relationship between the daily and initial tumor volumes, and (3) a functional general linear model that identified and exploited the primary modes of variation between time series describing the changing tumor volumes. Primary and nodal tumor volumes were examined separately. The accuracy of these models in predicting daily tumor volumes were compared with those of static and linear reference models using leave-one-out cross-validation. In predicting the daily volume of primary tumors, the general linear model and the functional general linear model were more accurate than the static reference model by 9.9% (range: -11.6%-23.8%) and 14.6% (range: -7.3%-27.5%), respectively, and were more accurate than the linear reference model by 14.2% (range: -6.8%-40.3%) and 13.1% (range: -1.5%-52.5%), respectively. In predicting the daily volume of nodal tumors, only the 14.4% (range: -11.1%-20.5%) improvement in accuracy of the functional general linear model compared to the static reference model was statistically significant. A general linear model and a functional general linear model trained on data from a small population of patients can predict the primary tumor volume throughout the course of radiation therapy with greater accuracy than standard reference models. These more accurate models may increase the prognostic value of information about the tumor garnered from pretreatment computed tomography images and facilitate improved treatment management.

Joint coverage probability in a simulation study on Continuous-Time Markov Chain parameter estimation.

PubMed

Benoit, Julia S; Chan, Wenyaw; Doody, Rachelle S

2015-01-01

Parameter dependency within data sets in simulation studies is common, especially in models such as Continuous-Time Markov Chains (CTMC). Additionally, the literature lacks a comprehensive examination of estimation performance for the likelihood-based general multi-state CTMC. Among studies attempting to assess the estimation, none have accounted for dependency among parameter estimates. The purpose of this research is twofold: 1) to develop a multivariate approach for assessing accuracy and precision for simulation studies 2) to add to the literature a comprehensive examination of the estimation of a general 3-state CTMC model. Simulation studies are conducted to analyze longitudinal data with a trinomial outcome using a CTMC with and without covariates. Measures of performance including bias, component-wise coverage probabilities, and joint coverage probabilities are calculated. An application is presented using Alzheimer's disease caregiver stress levels. Comparisons of joint and component-wise parameter estimates yield conflicting inferential results in simulations from models with and without covariates. In conclusion, caution should be taken when conducting simulation studies aiming to assess performance and choice of inference should properly reflect the purpose of the simulation.

Fifteenth NASTRAN (R) Users' Colloquium

NASA Technical Reports Server (NTRS)

1987-01-01

Numerous applications of the NASA Structural Analysis (NASTRAN) computer program, a general purpose finite element code, are discussed. Additional features that can be added to NASTRAN, interactive plotting of NASTRAN data on microcomputers, mass modeling for bars, the design of wind tunnel models, the analysis of ship structures subjected to underwater explosions, and buckling analysis of radio antennas are among the topics discussed.

The Effectiveness of CBL Model to Improve Analytical Thinking Skills the Students of Sport Science

ERIC Educational Resources Information Center

Sudibyo, Elok; Jatmiko, Budi; Widodo, Wahono

2016-01-01

Sport science undergraduate education, one of which purposes is to produce an analyst in sport. However, generally analytical thinking skills of sport science's students is still relatively very low in the context of sport. This study aimed to describe the effectiveness of Physics Learning Model in Sport Context, Context Based Learning (CBL)…

Contextual Differential Item Functioning: Examining the Validity of Teaching Self-Efficacy Instruments Using Hierarchical Generalized Linear Modeling

ERIC Educational Resources Information Center

Zhao, Jing

2012-01-01

The purpose of the study is to further investigate the validity of instruments used for collecting preservice teachers' perceptions of self-efficacy adapting the three-level IRT model described in Cheong's study (2006). The focus of the present study is to investigate whether the polytomously-scored items on the preservice teachers' self-efficacy…

Comparison and Computational Performance of Tsunami-HySEA and MOST Models for the LANTEX 2013 scenario

NASA Astrophysics Data System (ADS)

González-Vida, Jose M.; Macías, Jorge; Mercado, Aurelio; Ortega, Sergio; Castro, Manuel J.

2017-04-01

Tsunami-HySEA model is used to simulate the Caribbean LANTEX 2013 scenario (LANTEX is the acronym for Large AtlaNtic Tsunami EXercise, which is carried out annually). The numerical simulation of the propagation and inundation phases, is performed with both models but using different mesh resolutions and nested meshes. Some comparisons with the MOST tsunami model available at the University of Puerto Rico (UPR) are made. Both models compare well for propagating tsunami waves in open sea, producing very similar results. In near-shore shallow waters, Tsunami-HySEA should be compared with the inundation version of MOST, since the propagation version of MOST is limited to deeper waters. Regarding the inundation phase, a 1 arc-sec (approximately 30 m) resolution mesh covering all of Puerto Rico, is used, and a three-level nested meshes technique implemented. In the inundation phase, larger differences between model results are observed. Nevertheless, the most striking difference resides in computational time; Tsunami-HySEA is coded using the advantages of GPU architecture, and can produce a 4 h simulation in a 60 arcsec resolution grid for the whole Caribbean Sea in less than 4 min with a single general-purpose GPU and as fast as 11 s with 32 general-purpose GPUs. In the inundation stage with nested meshes, approximately 8 hours of wall clock time is needed for a 2-h simulation in a single GPU (versus more than 2 days for the MOST inundation, running three different parts of the island—West, Center, East—at the same time due to memory limitations in MOST). When domain decomposition techniques are finally implemented by breaking up the computational domain into sub-domains and assigning a GPU to each sub-domain (multi-GPU Tsunami-HySEA version), we show that the wall clock time significantly decreases, allowing high-resolution inundation modelling in very short computational times, reducing, for example, if eight GPUs are used, the wall clock time to around 1 hour. Besides, these computational times are obtained using general-purpose GPU hardware.

An evaluation of the directed flow graph methodology

NASA Technical Reports Server (NTRS)

Snyder, W. E.; Rajala, S. A.

1984-01-01

The applicability of the Directed Graph Methodology (DGM) to the design and analysis of special purpose image and signal processing hardware was evaluated. A special purpose image processing system was designed and described using DGM. The design, suitable for very large scale integration (VLSI) implements a region labeling technique. Two computer chips were designed, both using metal-nitride-oxide-silicon (MNOS) technology, as well as a functional system utilizing those chips to perform real time region labeling. The system is described in terms of DGM primitives. As it is currently implemented, DGM is inappropriate for describing synchronous, tightly coupled, special purpose systems. The nature of the DGM formalism lends itself more readily to modeling networks of general purpose processors.

Simulator study of the stall departure characteristics of a light general aviation airplane with and without a wing-leading-edge modification

NASA Technical Reports Server (NTRS)

Riley, D. R.

1985-01-01

A six-degree-of-freedom nonlinear simulation was developed for a two-place, single-engine, low-wing general aviation airplane for the stall and initial departure regions of flight. Two configurations, one with and one without an outboard wing-leading-edge modification, were modeled. The math models developed are presented simulation predictions and flight-test data for validation purposes and simulation results for the two configurations for various maneuvers and power settings are compared to show the beneficial influence of adding the wing-leading-edge modification.

Simulating spin models on GPU

NASA Astrophysics Data System (ADS)

Weigel, Martin

2011-09-01

Over the last couple of years it has been realized that the vast computational power of graphics processing units (GPUs) could be harvested for purposes other than the video game industry. This power, which at least nominally exceeds that of current CPUs by large factors, results from the relative simplicity of the GPU architectures as compared to CPUs, combined with a large number of parallel processing units on a single chip. To benefit from this setup for general computing purposes, the problems at hand need to be prepared in a way to profit from the inherent parallelism and hierarchical structure of memory accesses. In this contribution I discuss the performance potential for simulating spin models, such as the Ising model, on GPU as compared to conventional simulations on CPU.

Effect of thermal and mechanical parameter’s damage numerical simulation cycling effects on defects in hot metal forming processes

NASA Astrophysics Data System (ADS)

El Amri, Abdelouahid; el yakhloufi Haddou, Mounir; Khamlichi, Abdellatif

2017-10-01

Damage mechanisms in hot metal forming processes are accelerated by mechanical stresses arising during Thermal and mechanical properties variations, because it consists of the materials with different thermal and mechanical loadings and swelling coefficients. In this work, 3D finite element models (FEM) are developed to simulate the effect of Temperature and the stresses on the model development, using a general purpose FE software ABAQUS. Explicit dynamic analysis with coupled Temperature displacement procedure is used for a model. The purpose of this research was to study the thermomechanical damage mechanics in hot forming processes. The important process variables and the main characteristics of various hot forming processes will also be discussed.

Standard Operating Procedure for Using the NAFTA Guidance to Calculate Representative Half-life Values and Characterizing Pesticide Degradation

EPA Pesticide Factsheets

Results of the degradation kinetics project and describes a general approach for calculating and selecting representative half-life values from soil and aquatic transformation studies for risk assessment and exposure modeling purposes.

Organizational Strategies for End-User Computing Support.

ERIC Educational Resources Information Center

Blackmun, Robert R.; And Others

1988-01-01

Effective support for end users of computers has been an important issue in higher education from the first applications of general purpose mainframe computers through minicomputers, microcomputers, and supercomputers. The development of end user support is reviewed and organizational models are examined. (Author/MLW)

Rotating-fluid experiments with an atmospheric general circulation model

NASA Technical Reports Server (NTRS)

Geisler, J. E.; Pitcher, E. J.; Malone, R. C.

1983-01-01

In order to determine features of rotating fluid flow that are dependent on the geometry, rotating annulus-type experiments are carried out with a numerical model in spherical coordinates. Rather than constructing and testing a model expressly for this purpose, it is found expedient to modify an existing general circulation model of the atmosphere by removing the model physics and replacing the lower boundary with a uniform surface. A regime diagram derived from these model experiments is presented; its major features are interpreted and contrasted with the major features of rotating annulus regime diagrams. Within the wave regime, a narrow region is found where one or two zonal wave numbers are dominant. The results reveal no upper symmetric regime; wave activity at low rotation rates is thought to be maintained by barotropic rather than baroclinic processes.

24 CFR 902.1 - Purpose and general description.

Code of Federal Regulations, 2010 CFR

2010-04-01

... URBAN DEVELOPMENT PUBLIC HOUSING ASSESSMENT SYSTEM General Provisions § 902.1 Purpose and general description. (a) Purpose. The purpose of the Public Housing Assessment System (PHAS) is to improve the delivery of services in public housing and enhance trust in the public housing system among public housing...

Towards anatomic scale agent-based modeling with a massively parallel spatially explicit general-purpose model of enteric tissue (SEGMEnT_HPC).

PubMed

Cockrell, Robert Chase; Christley, Scott; Chang, Eugene; An, Gary

2015-01-01

Perhaps the greatest challenge currently facing the biomedical research community is the ability to integrate highly detailed cellular and molecular mechanisms to represent clinical disease states as a pathway to engineer effective therapeutics. This is particularly evident in the representation of organ-level pathophysiology in terms of abnormal tissue structure, which, through histology, remains a mainstay in disease diagnosis and staging. As such, being able to generate anatomic scale simulations is a highly desirable goal. While computational limitations have previously constrained the size and scope of multi-scale computational models, advances in the capacity and availability of high-performance computing (HPC) resources have greatly expanded the ability of computational models of biological systems to achieve anatomic, clinically relevant scale. Diseases of the intestinal tract are exemplary examples of pathophysiological processes that manifest at multiple scales of spatial resolution, with structural abnormalities present at the microscopic, macroscopic and organ-levels. In this paper, we describe a novel, massively parallel computational model of the gut, the Spatially Explicitly General-purpose Model of Enteric Tissue_HPC (SEGMEnT_HPC), which extends an existing model of the gut epithelium, SEGMEnT, in order to create cell-for-cell anatomic scale simulations. We present an example implementation of SEGMEnT_HPC that simulates the pathogenesis of ileal pouchitis, and important clinical entity that affects patients following remedial surgery for ulcerative colitis.

Using Unified Modelling Language (UML) as a process-modelling technique for clinical-research process improvement.

PubMed

Kumarapeli, P; De Lusignan, S; Ellis, T; Jones, B

2007-03-01

The Primary Care Data Quality programme (PCDQ) is a quality-improvement programme which processes routinely collected general practice computer data. Patient data collected from a wide range of different brands of clinical computer systems are aggregated, processed, and fed back to practices in an educational context to improve the quality of care. Process modelling is a well-established approach used to gain understanding and systematic appraisal, and identify areas of improvement of a business process. Unified modelling language (UML) is a general purpose modelling technique used for this purpose. We used UML to appraise the PCDQ process to see if the efficiency and predictability of the process could be improved. Activity analysis and thinking-aloud sessions were used to collect data to generate UML diagrams. The UML model highlighted the sequential nature of the current process as a barrier for efficiency gains. It also identified the uneven distribution of process controls, lack of symmetric communication channels, critical dependencies among processing stages, and failure to implement all the lessons learned in the piloting phase. It also suggested that improved structured reporting at each stage - especially from the pilot phase, parallel processing of data and correctly positioned process controls - should improve the efficiency and predictability of research projects. Process modelling provided a rational basis for the critical appraisal of a clinical data processing system; its potential maybe underutilized within health care.

Applications of large-eddy simulation: Synthesis of neutral boundary layer models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ohmstede, W.D.

The object of this report is to describe progress made towards the application of large-eddy simulation (LES), in particular, to the study of the neutral boundary layer (NBL). The broad purpose of the study is to provide support to the LES project currently underway at LLNL. The specific purpose of this study is to lay the groundwork for the simulation of the SBL through the establishment and implementation of model criteria for the simulation of the NBL. The idealistic NBL is never observed in the atmosphere and therefore has little practical significance. However, it is of considerable theoretical interest formore » several reasons. The report discusses the concept of Rossby-number similarity theory as it applies to the NBL. A particular implementation of the concept is described. Then, the results from prior simulations of the NBL are summarized. Model design criteria for two versions of the Brost LES (BLES) model are discussed. The general guidelines for the development of Version 1 of the Brost model (BV1) were to implement the model with a minimum of modifications which would alter the design criteria as established by Brost. Two major modifications of BLES incorporated into BV1 pertain to the initialization/parameterization of the model and the generalization of the boundary conditions at the air/earth interface. 18 refs., 4 figs.« less

22 CFR 309.1 - General purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

...-tax debts owed to Peace Corps and to the United States. ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true General purpose. 309.1 Section 309.1 Foreign Relations PEACE CORPS DEBT COLLECTION General Provisions § 309.1 General purpose. This part prescribes the...

47 CFR 32.6124 - General purpose computers expense.

Code of Federal Regulations, 2013 CFR

2013-10-01

... is the physical operation of general purpose computers and the maintenance of operating systems. This... UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6124... application systems and databases for general purpose computers. (See also § 32.6720, General and...

47 CFR 32.6124 - General purpose computers expense.

Code of Federal Regulations, 2014 CFR

2014-10-01

... is the physical operation of general purpose computers and the maintenance of operating systems. This... UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6124... application systems and databases for general purpose computers. (See also § 32.6720, General and...

47 CFR 32.6124 - General purpose computers expense.

Code of Federal Regulations, 2011 CFR

2011-10-01

... is the physical operation of general purpose computers and the maintenance of operating systems. This... UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6124... application systems and databases for general purpose computers. (See also § 32.6720, General and...

47 CFR 32.6124 - General purpose computers expense.

Code of Federal Regulations, 2012 CFR

2012-10-01

... is the physical operation of general purpose computers and the maintenance of operating systems. This... UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6124... application systems and databases for general purpose computers. (See also § 32.6720, General and...

47 CFR 32.6124 - General purpose computers expense.

Code of Federal Regulations, 2010 CFR

2010-10-01

... is the physical operation of general purpose computers and the maintenance of operating systems. This... UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6124... application systems and databases for general purpose computers. (See also § 32.6720, General and...

Modelling of volatility in monetary transmission mechanism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobešová, Anna; Klepáč, Václav; Kolman, Pavel

2015-03-10

The aim of this paper is to compare different approaches to modeling of volatility in monetary transmission mechanism. For this purpose we built time-varying parameter VAR (TVP-VAR) model with stochastic volatility and VAR-DCC-GARCH model with conditional variance. The data from three European countries are included in the analysis: the Czech Republic, Germany and Slovakia. Results show that VAR-DCC-GARCH system captures higher volatility of observed variables but main trends and detected breaks are generally identical in both approaches.

Finite element modelling of non-linear magnetic circuits using Cosmic NASTRAN

NASA Technical Reports Server (NTRS)

Sheerer, T. J.

1986-01-01

The general purpose Finite Element Program COSMIC NASTRAN currently has the ability to model magnetic circuits with constant permeablilities. An approach was developed which, through small modifications to the program, allows modelling of non-linear magnetic devices including soft magnetic materials, permanent magnets and coils. Use of the NASTRAN code resulted in output which can be used for subsequent mechanical analysis using a variation of the same computer model. Test problems were found to produce theoretically verifiable results.

The pricing of credit default swaps under a generalized mixed fractional Brownian motion

NASA Astrophysics Data System (ADS)

He, Xinjiang; Chen, Wenting

2014-06-01

In this paper, we consider the pricing of the CDS (credit default swap) under a GMFBM (generalized mixed fractional Brownian motion) model. As the name suggests, the GMFBM model is indeed a generalization of all the FBM (fractional Brownian motion) models used in the literature, and is proved to be able to effectively capture the long-range dependence of the stock returns. To develop the pricing mechanics of the CDS, we firstly derive a sufficient condition for the market modeled under the GMFBM to be arbitrage free. Then under the risk-neutral assumption, the CDS is fairly priced by investigating the two legs of the cash flow involved. The price we obtained involves elementary functions only, and can be easily implemented for practical purpose. Finally, based on numerical experiments, we analyze quantitatively the impacts of different parameters on the prices of the CDS. Interestingly, in comparison with all the other FBM models documented in the literature, the results produced from the GMFBM model are in a better agreement with those calculated from the classical Black-Scholes model.

Robust estimation of simulated urinary volume from camera images under bathroom illumination.

PubMed

Honda, Chizuru; Bhuiyan, Md Shoaib; Kawanaka, Haruki; Watanabe, Eiichi; Oguri, Koji

2016-08-01

General uroflowmetry method involves the risk of nosocomial infections or time and effort of the recording. Medical institutions, therefore, need to measure voided volume simply and hygienically. Multiple cylindrical model that can estimate the fluid flow rate from the photographed image using camera has been proposed in an earlier study. This study implemented a flow rate estimation by using a general-purpose camera system (Raspberry Pi Camera Module) and the multiple cylindrical model. However, large amounts of noise in extracting liquid region are generated by the variation of the illumination when performing measurements in the bathroom. So the estimation error gets very large. In other words, the specifications of the previous study's camera setup regarding the shutter type and the frame rate was too strict. In this study, we relax the specifications to achieve a flow rate estimation using a general-purpose camera. In order to determine the appropriate approximate curve, we propose a binarizing method using background subtraction at each scanning row and a curve approximation method using RANSAC. Finally, by evaluating the estimation accuracy of our experiment and by comparing it with the earlier study's results, we show the effectiveness of our proposed method for flow rate estimation.

Modeling Creep Processes in Aging Polymers

NASA Astrophysics Data System (ADS)

Olali, N. V.; Voitovich, L. V.; Zazimko, N. N.; Malezhik, M. P.

2016-03-01

The photoelastic method is generalized to creep in hereditary aging materials. Optical-creep curves and mechanical-creep or optical-relaxation curves are used to interpret fringe patterns. For materials with constant Poisson's ratio, it is sufficient to use mechanical- or optical-creep curves for this purpose

A Process Model of L2 Learners' Motivation: From the Perspectives of General Tendency and Individual Differences

ERIC Educational Resources Information Center

Hiromori, Tomohito

2009-01-01

The purpose of this study is to examine a process model of L2 learners' motivation. To investigate the overall process of motivation, the motivation of 148 university students was analyzed. Data were collected on three variables from the pre-decisional phase of motivation (i.e., value, expectancy, and intention) and four variables from the…

Assessing Validity of Measurement in Learning Disabilities Using Hierarchical Generalized Linear Modeling: The Roles of Anxiety and Motivation

ERIC Educational Resources Information Center

Sideridis, Georgios D.

2016-01-01

The purpose of the present studies was to test the hypothesis that the psychometric characteristics of ability scales may be significantly distorted if one accounts for emotional factors during test taking. Specifically, the present studies evaluate the effects of anxiety and motivation on the item difficulties of the Rasch model. In Study 1, the…

The Performance Improvement of the Lagrangian Particle Dispersion Model (LPDM) Using Graphics Processing Unit (GPU) Computing

DTIC Science & Technology

2017-08-01

access to the GPU for general purpose processing .5 CUDA is designed to work easily with multiple programming languages , including Fortran. CUDA is a...Using Graphics Processing Unit (GPU) Computing by Leelinda P Dawson Approved for public release; distribution unlimited...The Performance Improvement of the Lagrangian Particle Dispersion Model (LPDM) Using Graphics Processing Unit (GPU) Computing by Leelinda

Summary Report of the Proceedings of the Annual Model U.N. Seminar (9th, New York, New York, July 8-10, 1988).

ERIC Educational Resources Information Center

United Nations Association of the United States of America, New York, NY.

The purpose of this Model United Nations (UN) seminar for faculty advisors and conference leaders was to provide seminar participants with new and innovative ideas to more effectively simulate the complex UN system. This document summarizes seminar speeches presented by: (1) James Jonah, Assistant U.N. Secretary-General; (2) Frank Pinto,…

Monte Carlo Modeling of the Initial Radiation Emitted by a Nuclear Device in the National Capital Region

DTIC Science & Technology

2013-07-01

also simulated in the models. Data was derived from calculations using the three-dimensional Monte Carlo radiation transport code MCNP (Monte Carlo N...32  B.  MCNP PHYSICS OPTIONS ......................................................................................... 33  C.  HAZUS...input deck’) for the MCNP , Monte Carlo N-Particle, radiation transport code. MCNP is a general-purpose code designed to simulate neutron, photon

LECTURES ON DECISION THEORY,

DTIC Science & Technology

These lecture notes deal with the mathematical theory of decision - making , i.e., wihematical models of situations in which there is a set of...individual and group decision - making as a quantitative science, in contrast with a field such as physics, suggests that mathematical theorizing on...phenomena of decision - making is very much an exploratory enterprise and that ex isting models have limited generality and appli cability. The purpose is to

Evaluating the Service Quality of the Hotel Establishments in Sports Tourism with Regard to the Athletes

ERIC Educational Resources Information Center

Osmanoglu, Hasan; Üzüm, Hanifi

2018-01-01

The purpose of this study was to evaluate the service quality of the hotels which are provided sport tourism by athletes according to some variables. The research was conducted with cross-sectional research method as one of the general survey models and relational screening model. Target group of the study also constituted the sample group. This…

1 CFR 2.1 - Scope and purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Scope and purpose. 2.1 Section 2.1 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER GENERAL GENERAL INFORMATION § 2.1 Scope and purpose. (a) This chapter sets forth the policies, procedures, and delegations under which the...

1 CFR 2.1 - Scope and purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Scope and purpose. 2.1 Section 2.1 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER GENERAL GENERAL INFORMATION § 2.1 Scope and purpose. (a) This chapter sets forth the policies, procedures, and delegations under which the...

1 CFR 2.1 - Scope and purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Scope and purpose. 2.1 Section 2.1 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER GENERAL GENERAL INFORMATION § 2.1 Scope and purpose. (a) This chapter sets forth the policies, procedures, and delegations under which the...

1 CFR 2.1 - Scope and purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Scope and purpose. 2.1 Section 2.1 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER GENERAL GENERAL INFORMATION § 2.1 Scope and purpose. (a) This chapter sets forth the policies, procedures, and delegations under which the...

1 CFR 2.1 - Scope and purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Scope and purpose. 2.1 Section 2.1 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER GENERAL GENERAL INFORMATION § 2.1 Scope and purpose. (a) This chapter sets forth the policies, procedures, and delegations under which the...

Artificial Neural Network versus Linear Models Forecasting Doha Stock Market

NASA Astrophysics Data System (ADS)

Yousif, Adil; Elfaki, Faiz

2017-12-01

The purpose of this study is to determine the instability of Doha stock market and develop forecasting models. Linear time series models are used and compared with a nonlinear Artificial Neural Network (ANN) namely Multilayer Perceptron (MLP) Technique. It aims to establish the best useful model based on daily and monthly data which are collected from Qatar exchange for the period starting from January 2007 to January 2015. Proposed models are for the general index of Qatar stock exchange and also for the usages in other several sectors. With the help of these models, Doha stock market index and other various sectors were predicted. The study was conducted by using various time series techniques to study and analyze data trend in producing appropriate results. After applying several models, such as: Quadratic trend model, double exponential smoothing model, and ARIMA, it was concluded that ARIMA (2,2) was the most suitable linear model for the daily general index. However, ANN model was found to be more accurate than time series models.

Analysis of whisker-toughened CMC structural components using an interactive reliability model

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.; Palko, Joseph L.

1992-01-01

Realizing wider utilization of ceramic matrix composites (CMC) requires the development of advanced structural analysis technologies. This article focuses on the use of interactive reliability models to predict component probability of failure. The deterministic William-Warnke failure criterion serves as theoretical basis for the reliability model presented here. The model has been implemented into a test-bed software program. This computer program has been coupled to a general-purpose finite element program. A simple structural problem is presented to illustrate the reliability model and the computer algorithm.

The stay/switch model describes choice among magnitudes of reinforcers.

PubMed

MacDonall, James S

2008-06-01

The stay/switch model is an alternative to the generalized matching law for describing choice in concurrent procedures. The purpose of the present experiment was to extend this model to choice among magnitudes of reinforcers. Rats were exposed to conditions in which the magnitude of reinforcers (number of food pellets) varied for staying at alternative 1, switching from alternative 1, staying at alternative 2 and switching from alternative 2. A changeover delay was not used. The results showed that the stay/switch model provided a good account of the data overall, and deviations from fits of the generalized matching law to response allocation data were in the direction predicted by the stay/switch model. In addition, comparisons among specific conditions suggested that varying the ratio of obtained reinforcers, as in the generalized matching law, was not necessary to change the response and time allocations. Other comparisons suggested that varying the ratio of obtained reinforcers was not sufficient to change response allocation. Taken together these results provide additional support for the stay/switch model of concurrent choice.

Marketing Distributive Education. Secondary Curriculum Guide.

ERIC Educational Resources Information Center

Holmes, Wally S.; And Others

This curriculum guide is intended to provide vocational teachers, supervisors, administrators, and counselors with a suggested model for organizing a course in general marketing. Discussed first are the philosophy, purpose, and objectives of the course. Second, course admissions and recruitment procedures are outlined. Included in the next three…

General-Purpose Monitoring during Speech Production

ERIC Educational Resources Information Center

Ries, Stephanie; Janssen, Niels; Dufau, Stephane; Alario, F.-Xavier; Burle, Boris

2011-01-01

The concept of "monitoring" refers to our ability to control our actions on-line. Monitoring involved in speech production is often described in psycholinguistic models as an inherent part of the language system. We probed the specificity of speech monitoring in two psycholinguistic experiments where electroencephalographic activities were…

Program to Optimize Simulated Trajectories (POST). Volume 1: Formulation manual

NASA Technical Reports Server (NTRS)

Brauer, G. L.; Cornick, D. E.; Habeger, A. R.; Petersen, F. M.; Stevenson, R.

1975-01-01

A general purpose FORTRAN program for simulating and optimizing point mass trajectories (POST) of aerospace vehicles is described. The equations and the numerical techniques used in the program are documented. Topics discussed include: coordinate systems, planet model, trajectory simulation, auxiliary calculations, and targeting and optimization.

Functional aging in pilots : an examination of a mathematical model based on medical data on general aviation pilots.

DOT National Transportation Integrated Search

1982-06-01

The purpose of this study was to apply mathematical procedures to the Federal Aviation Administration (FAA) pilot medical data to examine the feasibility of devising a linear numbering system such that (1) the cumulative probability distribution func...

Computer and control applications in a vegetable processing plant

USDA-ARS?s Scientific Manuscript database

There are many advantages to the use of computers and control in food industry. Software in the food industry takes 2 forms - general purpose commercial computer software and software for specialized applications, such as drying and thermal processing of foods. Many applied simulation models for d...

Online Learning Programs: Evaluation's Challenging Future

ERIC Educational Resources Information Center

Nord, Derek

2011-01-01

With the vast array of contextual factors, pedagogical approaches, models of implementation, and purposes of education and training related to online learning, educators, learners, and the general public alike are seeking answers regarding utility and effectiveness of online learning. This article identifies and responds to many of the challenges…

Computer Simulation in Social Science.

ERIC Educational Resources Information Center

Garson, G. David

From a base in military models, computer simulation has evolved to provide a wide variety of applications in social science. General purpose simulation packages and languages such as FIRM, DYNAMO, and others have made significant contributions toward policy discussion in the social sciences and have well-documented efficacy in instructional…

7 CFR 226.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 226.1 Section 226.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM General § 226.1 General purpose and scope. This part announces the...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 225.1 Section 225.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations...

[The validation of the parameters for a basic model of a power supply layout for general x-ray diagnostic apparatus].

PubMed

Blinov, N N

2000-01-01

Specifications for the main element of a modern X-ray diagnostic device an X-ray feeder are formulated. There is evidence for choosing its parameters. The new rational routine of X-ray study and the layout of a X-ray room are proposed. Information on the up-to-date commercially manufactured basic medium-frequency general-purpose X-ray feeder "URP-30 SCh Amico" is given.

Proceedings of the Ship Control Systems Symposium (7th) Held in Bath, England on 24-27 September 1981. Volume 2

DTIC Science & Technology

1984-09-27

more effectively structured and transportable simulation program modules and powerful support software, are already in place for current use. The early...incorporates the various limits and conditions described for the major acceleration categories. (14) Speed Loop This module Is executed when the shaft speed...available, high confidence models and modules . A great leverage is gained by using generally available general purpose computers and associated support

Emerging allied dental workforce models: considerations for academic dental institutions.

PubMed

McKinnon, Monette; Luke, Gina; Bresch, Jack; Moss, Myla; Valachovic, Richard W

2007-11-01

The U.S. surgeon general defined the national oral health care crisis in 2001 in Oral Health in America: A Report of the Surgeon General. The report concluded that the public infrastructure for oral health is not sufficient to meet the needs of disadvantaged groups and is disproportionately available depending upon certain racial, ethnic, and socioeconomic factors within the U.S. population. Now, several new workforce models are emerging that attempt to address shortcomings in the oral health care workforce. Access to oral health care is the most critical issue driving these new workforce models. Currently, three midlevel dental workforce models dominate the debate. The purpose of this report is to describe these models and their stage of development to assist the dental education community in preparing for the education of these new providers. The models are 1) the advanced dental hygiene practitioner; 2) the community dental health coordinator; and 3) the dental health aide therapist.

Microscale Obstacle Resolving Air Quality Model Evaluation with the Michelstadt Case

PubMed Central

Rakai, Anikó; Kristóf, Gergely

2013-01-01

Modelling pollutant dispersion in cities is challenging for air quality models as the urban obstacles have an important effect on the flow field and thus the dispersion. Computational Fluid Dynamics (CFD) models with an additional scalar dispersion transport equation are a possible way to resolve the flowfield in the urban canopy and model dispersion taking into consideration the effect of the buildings explicitly. These models need detailed evaluation with the method of verification and validation to gain confidence in their reliability and use them as a regulatory purpose tool in complex urban geometries. This paper shows the performance of an open source general purpose CFD code, OpenFOAM for a complex urban geometry, Michelstadt, which has both flow field and dispersion measurement data. Continuous release dispersion results are discussed to show the strengths and weaknesses of the modelling approach, focusing on the value of the turbulent Schmidt number, which was found to give best statistical metric results with a value of 0.7. PMID:24027450

Microscale obstacle resolving air quality model evaluation with the Michelstadt case.

PubMed

Rakai, Anikó; Kristóf, Gergely

2013-01-01

Modelling pollutant dispersion in cities is challenging for air quality models as the urban obstacles have an important effect on the flow field and thus the dispersion. Computational Fluid Dynamics (CFD) models with an additional scalar dispersion transport equation are a possible way to resolve the flowfield in the urban canopy and model dispersion taking into consideration the effect of the buildings explicitly. These models need detailed evaluation with the method of verification and validation to gain confidence in their reliability and use them as a regulatory purpose tool in complex urban geometries. This paper shows the performance of an open source general purpose CFD code, OpenFOAM for a complex urban geometry, Michelstadt, which has both flow field and dispersion measurement data. Continuous release dispersion results are discussed to show the strengths and weaknesses of the modelling approach, focusing on the value of the turbulent Schmidt number, which was found to give best statistical metric results with a value of 0.7.

Dissolution mechanism of calcium apatites in acids: A review of literature

PubMed Central

Dorozhkin, Sergey V

2012-01-01

Eight dissolution models of calcium apatites (both fluorapatite and hydroxyapatite) in acids were drawn from the published literature, analyzed and discussed. Major limitations and drawbacks of the models were conversed in details. The models were shown to deal with different aspects of apatite dissolution phenomenon and none of them was able to describe the dissolution process in general. Therefore, an attempt to combine the findings obtained by different researchers was performed which resulted in creation of the general description of apatite dissolution in acids. For this purpose, eight dissolution models were assumed to complement each other and provide the correct description of the specific aspects of apatite dissolution. The general description considers all possible dissolution stages involved and points out to some missing and unclear phenomena to be experimentally studied and verified in future. This creates a new methodological approach to investigate reaction mechanisms based on sets of affine data, obtained by various research groups under dissimilar experimental conditions. PMID:25237611

A Steady State and Quasi-Steady Interface Between the Generalized Fluid System Simulation Program and the SINDA/G Thermal Analysis Program

NASA Technical Reports Server (NTRS)

Schallhorn, Paul; Majumdar, Alok; Tiller, Bruce

2001-01-01

A general purpose, one dimensional fluid flow code is currently being interfaced with the thermal analysis program SINDA/G. The flow code, GFSSP, is capable of analyzing steady state and transient flow in a complex network. The flow code is capable of modeling several physical phenomena including compressibility effects, phase changes, body forces (such as gravity and centrifugal) and mixture thermodynamics for multiple species. The addition of GFSSP to SINDA/G provides a significant improvement in convective heat transfer modeling for SINDA/G. The interface development is conducted in multiple phases. This paper describes the first phase of the interface which allows for steady and quasisteady (unsteady solid, steady fluid) conjugate heat transfer modeling.

Frequency Response of Synthetic Vocal Fold Models with Linear and Nonlinear Material Properties

PubMed Central

Shaw, Stephanie M.; Thomson, Scott L.; Dromey, Christopher; Smith, Simeon

2014-01-01

Purpose The purpose of this study was to create synthetic vocal fold models with nonlinear stress-strain properties and to investigate the effect of linear versus nonlinear material properties on fundamental frequency during anterior-posterior stretching. Method Three materially linear and three materially nonlinear models were created and stretched up to 10 mm in 1 mm increments. Phonation onset pressure (Pon) and fundamental frequency (F0) at Pon were recorded for each length. Measurements were repeated as the models were relaxed in 1 mm increments back to their resting lengths, and tensile tests were conducted to determine the stress-strain responses of linear versus nonlinear models. Results Nonlinear models demonstrated a more substantial frequency response than did linear models and a more predictable pattern of F0 increase with respect to increasing length (although range was inconsistent across models). Pon generally increased with increasing vocal fold length for nonlinear models, whereas for linear models, Pon decreased with increasing length. Conclusions Nonlinear synthetic models appear to more accurately represent the human vocal folds than linear models, especially with respect to F0 response. PMID:22271874

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

47 CFR 32.2124 - General purpose computers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false General purpose computers. 32.2124 Section 32.2124 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES UNIFORM... General purpose computers. (a) This account shall include the original cost of computers and peripheral...

32 CFR 644.134 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... buildings, including land incidental thereto, suitable for the general use of Government agencies, including...) Special-purpose space is space in buildings, including land incidental thereto, wholly or predominantly utilized for the special purposes of an agency, and not generally suitable for general-purpose use...

26 CFR 1.355-0 - Outline of sections.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... (b) Independent business purpose. (1) Independent business purpose requirement. (2) Corporate business purpose. (3) Business purpose for distribution. (4) Business purpose as evidence of nondevice. (5... distribution of earnings and profits. (1) In general. (2) Device factors. (i) In general. (ii) Pro rata...

26 CFR 1.355-0 - Outline of sections.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... (b) Independent business purpose. (1) Independent business purpose requirement. (2) Corporate business purpose. (3) Business purpose for distribution. (4) Business purpose as evidence of nondevice. (5... distribution of earnings and profits. (1) In general. (2) Device factors. (i) In general. (ii) Pro rata...

Multiple memory systems as substrates for multiple decision systems

PubMed Central

Doll, Bradley B.; Shohamy, Daphna; Daw, Nathaniel D.

2014-01-01

It has recently become widely appreciated that value-based decision making is supported by multiple computational strategies. In particular, animal and human behavior in learning tasks appears to include habitual responses described by prominent model-free reinforcement learning (RL) theories, but also more deliberative or goal-directed actions that can be characterized by a different class of theories, model-based RL. The latter theories evaluate actions by using a representation of the contingencies of the task (as with a learned map of a spatial maze), called an “internal model.” Given the evidence of behavioral and neural dissociations between these approaches, they are often characterized as dissociable learning systems, though they likely interact and share common mechanisms. In many respects, this division parallels a longstanding dissociation in cognitive neuroscience between multiple memory systems, describing, at the broadest level, separate systems for declarative and procedural learning. Procedural learning has notable parallels with model-free RL: both involve learning of habits and both are known to depend on parts of the striatum. Declarative memory, by contrast, supports memory for single events or episodes and depends on the hippocampus. The hippocampus is thought to support declarative memory by encoding temporal and spatial relations among stimuli and thus is often referred to as a relational memory system. Such relational encoding is likely to play an important role in learning an internal model, the representation that is central to model-based RL. Thus, insofar as the memory systems represent more general-purpose cognitive mechanisms that might subserve performance on many sorts of tasks including decision making, these parallels raise the question whether the multiple decision systems are served by multiple memory systems, such that one dissociation is grounded in the other. Here we investigated the relationship between model-based RL and relational memory by comparing individual differences across behavioral tasks designed to measure either capacity. Human subjects performed two tasks, a learning and generalization task (acquired equivalence) which involves relational encoding and depends on the hippocampus; and a sequential RL task that could be solved by either a model-based or model-free strategy. We assessed the correlation between subjects’ use of flexible, relational memory, as measured by generalization in the acquired equivalence task, and their differential reliance on either RL strategy in the decision task. We observed a significant positive relationship between generalization and model-based, but not model-free, choice strategies. These results are consistent with the hypothesis that model-based RL, like acquired equivalence, relies on a more general-purpose relational memory system. PMID:24846190

Red River Waterway Thermal Studies. Report 2. Thermal Stress Analyses

DTIC Science & Technology

1991-12-01

stress relaxation, q. Shrinkage of the concrete, and . Thermal properties of the concrete including coefficient of thermal expansion , specific heat...Finite-Element Code 12. The thermal stress analyses in this investigation was performed using ABAQUS , a general-purpose, heat-transfer and structural...model (the UMAT 9 subroutine discussed below) may be incorporated as an external subroutine linked to the ABAQUS library. 14. In order to model the

Modern Models of Psychosocial Adaptation to Chronic Illness and Disability as Viewed through the Prism of Lewin's Field Theory: A Comparative Review

ERIC Educational Resources Information Center

Livneh, Hanoch; Bishop, Malachy; Anctil, Tina M.

2014-01-01

Purpose: In this article, we describe how four recent models of psychosocial adaptation to chronic illness and disability (CID) could be fruitfully conceptualized and compared by resorting to the general framework of Lewin's field theory--a theory frequently regarded as a precursor and the primary impetus to the development of the field of…

Computer Simulation in Undergraduate Instruction: A Symposium.

ERIC Educational Resources Information Center

Street, Warren R.; And Others

These symposium papers discuss the instructional use of computers in psychology, with emphasis on computer-produced simulations. The first, by Rich Edwards, briefly outlines LABSIM, a general purpose system of FORTRAN programs which simulate data collection in more than a dozen experimental models in psychology and are designed to train students…

78 FR 7718 - Review of the General Purpose Costing System

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... for switching cars, regardless of car ownership. These costs are referred to as ``switch engine minute... provide the railroad industry and shippers with a standardized costing model; to cost the Board's Car Load... movement. Next, URCS applies ``efficiency adjustments'' to higher-volume movements (multi-car and trainload...

Religious Attendance and Loneliness in Later Life

ERIC Educational Resources Information Center

Rote, Sunshine; Hill, Terrence D.; Ellison, Christopher G.

2013-01-01

Purpose of the Study: Studies show that loneliness is a major risk factor for health issues in later life. Although research suggests that religious involvement can protect against loneliness, explanations for this general pattern are underdeveloped and undertested. In this paper, we propose and test a theoretical model, which suggests that social…

32 CFR 199.18 - Uniform HMO Benefit.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 2 2014-07-01 2014-07-01 false Uniform HMO Benefit. 199.18 Section 199.18... Benefit. (a) In general. There is established a Uniform HMO Benefit. The purpose of the Uniform HMO benefit is to establish a health benefit option modeled on health maintenance organization plans. This...

Teacher Perceptions on School Administrators' Entrepreneurship Skills

ERIC Educational Resources Information Center

Polat, Hakan

2017-01-01

The purpose of this study is to determine school administrators' entrepreneurship skills according to teacher opinions. The general screening model was used in the study. 227 teachers working in the province of Elazig constituted the sample of the study. The data were collected through the "Entrepreneurship Scale". According to the study…

Training Evaluation: An Analysis of the Stakeholders' Evaluation Needs

ERIC Educational Resources Information Center

Guerci, Marco; Vinante, Marco

2011-01-01

Purpose: In recent years, the literature on program evaluation has examined multi-stakeholder evaluation, but training evaluation models and practices have not generally taken this problem into account. The aim of this paper is to fill this gap. Design/methodology/approach: This study identifies intersections between methodologies and approaches…

26 CFR 1.355-0 - Outline of sections.

Code of Federal Regulations, 2014 CFR

2014-04-01

... distributed. (b) Independent business purpose. (1) Independent business purpose requirement. (2) Corporate business purpose. (3) Business purpose for distribution. (4) Business purpose as evidence of nondevice. (5... distribution of earnings and profits. (1) In general. (2) Device factors. (i) In general. (ii) Pro rata...

26 CFR 1.355-0 - Outline of sections.

Code of Federal Regulations, 2013 CFR

2013-04-01

... distributed. (b) Independent business purpose. (1) Independent business purpose requirement. (2) Corporate business purpose. (3) Business purpose for distribution. (4) Business purpose as evidence of nondevice. (5... distribution of earnings and profits. (1) In general. (2) Device factors. (i) In general. (ii) Pro rata...

26 CFR 1.355-0 - Outline of sections.

Code of Federal Regulations, 2012 CFR

2012-04-01

... distributed. (b) Independent business purpose. (1) Independent business purpose requirement. (2) Corporate business purpose. (3) Business purpose for distribution. (4) Business purpose as evidence of nondevice. (5... distribution of earnings and profits. (1) In general. (2) Device factors. (i) In general. (ii) Pro rata...

Cloud immersion building shielding factors for US residential structures.

PubMed

Dickson, E D; Hamby, D M

2014-12-01

This paper presents validated building shielding factors designed for contemporary US housing-stock under an idealized, yet realistic, exposure scenario within a semi-infinite cloud of radioactive material. The building shielding factors are intended for use in emergency planning and level three probabilistic risk assessments for a variety of postulated radiological events in which a realistic assessment is necessary to better understand the potential risks for accident mitigation and emergency response planning. Factors are calculated from detailed computational housing-units models using the general-purpose Monte Carlo N-Particle computational code, MCNP5, and are benchmarked from a series of narrow- and broad-beam measurements analyzing the shielding effectiveness of ten common general-purpose construction materials and ten shielding models representing the primary weather barriers (walls and roofs) of likely US housing-stock. Each model was designed to scale based on common residential construction practices and include, to the extent practical, all structurally significant components important for shielding against ionizing radiation. Calculations were performed for floor-specific locations as well as for computing a weighted-average representative building shielding factor for single- and multi-story detached homes, both with and without basement, as well for single-wide manufactured housing-units.

Optimization of GATE and PHITS Monte Carlo code parameters for uniform scanning proton beam based on simulation with FLUKA general-purpose code

NASA Astrophysics Data System (ADS)

Kurosu, Keita; Takashina, Masaaki; Koizumi, Masahiko; Das, Indra J.; Moskvin, Vadim P.

2014-10-01

Although three general-purpose Monte Carlo (MC) simulation tools: Geant4, FLUKA and PHITS have been used extensively, differences in calculation results have been reported. The major causes are the implementation of the physical model, preset value of the ionization potential or definition of the maximum step size. In order to achieve artifact free MC simulation, an optimized parameters list for each simulation system is required. Several authors have already proposed the optimized lists, but those studies were performed with a simple system such as only a water phantom. Since particle beams have a transport, interaction and electromagnetic processes during beam delivery, establishment of an optimized parameters-list for whole beam delivery system is therefore of major importance. The purpose of this study was to determine the optimized parameters list for GATE and PHITS using proton treatment nozzle computational model. The simulation was performed with the broad scanning proton beam. The influences of the customizing parameters on the percentage depth dose (PDD) profile and the proton range were investigated by comparison with the result of FLUKA, and then the optimal parameters were determined. The PDD profile and the proton range obtained from our optimized parameters list showed different characteristics from the results obtained with simple system. This led to the conclusion that the physical model, particle transport mechanics and different geometry-based descriptions need accurate customization in planning computational experiments for artifact-free MC simulation.

A family of dynamic models for large-eddy simulation

NASA Technical Reports Server (NTRS)

Carati, D.; Jansen, K.; Lund, T.

1995-01-01

Since its first application, the dynamic procedure has been recognized as an effective means to compute rather than prescribe the unknown coefficients that appear in a subgrid-scale model for Large-Eddy Simulation (LES). The dynamic procedure is usually used to determine the nondimensional coefficient in the Smagorinsky (1963) model. In reality the procedure is quite general and it is not limited to the Smagorinsky model by any theoretical or practical constraints. The purpose of this note is to consider a generalized family of dynamic eddy viscosity models that do not necessarily rely on the local equilibrium assumption built into the Smagorinsky model. By invoking an inertial range assumption, it will be shown that the coefficients in the new models need not be nondimensional. This additional degree of freedom allows the use of models that are scaled on traditionally unknown quantities such as the dissipation rate. In certain cases, the dynamic models with dimensional coefficients are simpler to implement, and allow for a 30% reduction in the number of required filtering operations.

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

NASA Technical Reports Server (NTRS)

Arya, V. K.; Kaufman, A.

1989-01-01

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

NASA Technical Reports Server (NTRS)

Arya, V. K.; Kaufman, A.

1987-01-01

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

Towards Anatomic Scale Agent-Based Modeling with a Massively Parallel Spatially Explicit General-Purpose Model of Enteric Tissue (SEGMEnT_HPC)

PubMed Central

Cockrell, Robert Chase; Christley, Scott; Chang, Eugene; An, Gary

2015-01-01

Perhaps the greatest challenge currently facing the biomedical research community is the ability to integrate highly detailed cellular and molecular mechanisms to represent clinical disease states as a pathway to engineer effective therapeutics. This is particularly evident in the representation of organ-level pathophysiology in terms of abnormal tissue structure, which, through histology, remains a mainstay in disease diagnosis and staging. As such, being able to generate anatomic scale simulations is a highly desirable goal. While computational limitations have previously constrained the size and scope of multi-scale computational models, advances in the capacity and availability of high-performance computing (HPC) resources have greatly expanded the ability of computational models of biological systems to achieve anatomic, clinically relevant scale. Diseases of the intestinal tract are exemplary examples of pathophysiological processes that manifest at multiple scales of spatial resolution, with structural abnormalities present at the microscopic, macroscopic and organ-levels. In this paper, we describe a novel, massively parallel computational model of the gut, the Spatially Explicitly General-purpose Model of Enteric Tissue_HPC (SEGMEnT_HPC), which extends an existing model of the gut epithelium, SEGMEnT, in order to create cell-for-cell anatomic scale simulations. We present an example implementation of SEGMEnT_HPC that simulates the pathogenesis of ileal pouchitis, and important clinical entity that affects patients following remedial surgery for ulcerative colitis. PMID:25806784

Variable Complexity Structural Optimization of Shells

NASA Technical Reports Server (NTRS)

Haftka, Raphael T.; Venkataraman, Satchi

1999-01-01

Structural designers today face both opportunities and challenges in a vast array of available analysis and optimization programs. Some programs such as NASTRAN, are very general, permitting the designer to model any structure, to any degree of accuracy, but often at a higher computational cost. Additionally, such general procedures often do not allow easy implementation of all constraints of interest to the designer. Other programs, based on algebraic expressions used by designers one generation ago, have limited applicability for general structures with modem materials. However, when applicable, they provide easy understanding of design decisions trade-off. Finally, designers can also use specialized programs suitable for designing efficiently a subset of structural problems. For example, PASCO and PANDA2 are panel design codes, which calculate response and estimate failure much more efficiently than general-purpose codes, but are narrowly applicable in terms of geometry and loading. Therefore, the problem of optimizing structures based on simultaneous use of several models and computer programs is a subject of considerable interest. The problem of using several levels of models in optimization has been dubbed variable complexity modeling. Work under NASA grant NAG1-2110 has been concerned with the development of variable complexity modeling strategies with special emphasis on response surface techniques. In addition, several modeling issues for the design of shells of revolution were studied.

Variable Complexity Structural Optimization of Shells

NASA Technical Reports Server (NTRS)

Haftka, Raphael T.; Venkataraman, Satchi

1998-01-01

Structural designers today face both opportunities and challenges in a vast array of available analysis and optimization programs. Some programs such as NASTRAN, are very general, permitting the designer to model any structure, to any degree of accuracy, but often at a higher computational cost. Additionally, such general procedures often do not allow easy implementation of all constraints of interest to the designer. Other programs, based on algebraic expressions used by designers one generation ago, have limited applicability for general structures with modem materials. However, when applicable, they provide easy understanding of design decisions trade-off. Finally, designers can also use specialized programs suitable for designing efficiently a subset of structural problems. For example, PASCO and PANDA2 are panel design codes, which calculate response and estimate failure much more efficiently than general-purpose codes, but are narrowly applicable in terms of geometry and loading. Therefore, the problem of optimizing structures based on simultaneous use of several models and computer programs is a subject of considerable interest. The problem of using several levels of models in optimization has been dubbed variable complexity modeling. Work under NASA grant NAG1-1808 has been concerned with the development of variable complexity modeling strategies with special emphasis on response surface techniques. In addition several modeling issues for the design of shells of revolution were studied.

A senstitivity study of the ground hydrologic model using data generated by an atmospheric general circulation model. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Sun, S. F.

1985-01-01

The Ground Hydrologic Model (GHM) developed for use in an atmospheric general circulation model (GCM) has been refined. A series of sensitivity studies of the new version of the GHM were conducted for the purpose of understanding the role played by various physical parameters in the GHM. The following refinements have been made: (1) the GHM is coupled directly with the planetary boundary layer (PBL); (2) a bulk vegetation layer is added with a more realistic large-scale parameterization; and (3) the infiltration rate is modified. This version GHM has been tested using input data derived from a GCM simulation run for eight North America regions for 45 days. The results are compared with those of the resident GHM in the GCM. The daily average of grid surface temperatures from both models agree reasonably well in phase and magnitude. However, large difference exists in one or two regions on some days. The daily average evapotranspiration is in general 10 to 30% less than the corresponding value given by the resident GHM.

Reply to comment by Fred L. Ogden et al. on "Beyond the SCS-CN method: A theoretical framework for spatially lumped rainfall-runoff response"

NASA Astrophysics Data System (ADS)

Bartlett, M. S.; Parolari, A. J.; McDonnell, J. J.; Porporato, A.

2017-07-01

Though Ogden et al. list several shortcomings of the original SCS-CN method, fit for purpose is a key consideration in hydrological modelling, as shown by the adoption of SCS-CN method in many design standards. The theoretical framework of Bartlett et al. [2016a] reveals a family of semidistributed models, of which the SCS-CN method is just one member. Other members include event-based versions of the Variable Infiltration Capacity (VIC) model and TOPMODEL. This general model allows us to move beyond the limitations of the original SCS-CN method under different rainfall-runoff mechanisms and distributions for soil and rainfall variability. Future research should link this general model approach to different hydrogeographic settings, in line with the call for action proposed by Ogden et al.

Addition of equilibrium air to an upwind Navier-Stokes code and other first steps toward a more generalized flow solver

NASA Technical Reports Server (NTRS)

Rosen, Bruce S.

1991-01-01

An upwind three-dimensional volume Navier-Stokes code is modified to facilitate modeling of complex geometries and flow fields represented by proposed National Aerospace Plane concepts. Code enhancements include an equilibrium air model, a generalized equilibrium gas model and several schemes to simplify treatment of complex geometric configurations. The code is also restructured for inclusion of an arbitrary number of independent and dependent variables. This latter capability is intended for eventual use to incorporate nonequilibrium/chemistry gas models, more sophisticated turbulence and transition models, or other physical phenomena which will require inclusion of additional variables and/or governing equations. Comparisons of computed results with experimental data and results obtained using other methods are presented for code validation purposes. Good correlation is obtained for all of the test cases considered, indicating the success of the current effort.

Process-driven selection of information systems for healthcare

NASA Astrophysics Data System (ADS)

Mills, Stephen F.; Yeh, Raymond T.; Giroir, Brett P.; Tanik, Murat M.

1995-05-01

Integration of networking and data management technologies such as PACS, RIS and HIS into a healthcare enterprise in a clinically acceptable manner is a difficult problem. Data within such a facility are generally managed via a combination of manual hardcopy systems and proprietary, special-purpose data processing systems. Process modeling techniques have been successfully applied to engineering and manufacturing enterprises, but have not generally been applied to service-based enterprises such as healthcare facilities. The use of process modeling techniques can provide guidance for the placement, configuration and usage of PACS and other informatics technologies within the healthcare enterprise, and thus improve the quality of healthcare. Initial process modeling activities conducted within the Pediatric ICU at Children's Medical Center in Dallas, Texas are described. The ongoing development of a full enterprise- level model for the Pediatric ICU is also described.

Introduction to GRASP - General rotorcraft aeromechanical stability program - A modern approach to rotorcraft modeling

NASA Technical Reports Server (NTRS)

Hodges, D. H.; Hopkins, A. S.; Kunz, D. L.; Hinnant, H. E.

1986-01-01

The General Rotorcraft Aeromechanical Stability Program (GRASP), which is a hybrid between finite element programs and spacecraft-oriented multibody programs, is described in terms of its design and capabilities. Numerical results from GRASP are presented and compared with the results from an existing, special-purpose coupled rotor/body aeromechanical stability program and with experimental data of Dowell and Traybar (1975 and 1977) for large deflections of an end-loaded cantilevered beam. The agreement is excellent in both cases.

Investigation of Skylab imagery for regional planning. [New York, New Jersey, and Connecticut

NASA Technical Reports Server (NTRS)

Harting, W. (Principal Investigator)

1975-01-01

The author has identified the following significant results. It is feasible to use earth terrain camera imagery to detect four land uses (vacant land, developed land, streets, and water) for general regional planning purposes. Multispectral imagery is suitable for detecting, mapping, and measuring water bodies as small as two acres. Sufficient information can be extracted to prepare graphic and pictorial representations of the general growth and development patterns, but cannot be incorporated into an inventory file for predictive models.

Consistency of Cluster Analysis for Cognitive Diagnosis: The Reduced Reparameterized Unified Model and the General Diagnostic Model.

PubMed

Chiu, Chia-Yi; Köhn, Hans-Friedrich

2016-09-01

The asymptotic classification theory of cognitive diagnosis (ACTCD) provided the theoretical foundation for using clustering methods that do not rely on a parametric statistical model for assigning examinees to proficiency classes. Like general diagnostic classification models, clustering methods can be useful in situations where the true diagnostic classification model (DCM) underlying the data is unknown and possibly misspecified, or the items of a test conform to a mix of multiple DCMs. Clustering methods can also be an option when fitting advanced and complex DCMs encounters computational difficulties. These can range from the use of excessive CPU times to plain computational infeasibility. However, the propositions of the ACTCD have only been proven for the Deterministic Input Noisy Output "AND" gate (DINA) model and the Deterministic Input Noisy Output "OR" gate (DINO) model. For other DCMs, there does not exist a theoretical justification to use clustering for assigning examinees to proficiency classes. But if clustering is to be used legitimately, then the ACTCD must cover a larger number of DCMs than just the DINA model and the DINO model. Thus, the purpose of this article is to prove the theoretical propositions of the ACTCD for two other important DCMs, the Reduced Reparameterized Unified Model and the General Diagnostic Model.

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

21 CFR 864.4010 - General purpose reagent.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false General purpose reagent. 864.4010 Section 864.4010 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Specimen Preparation Reagents § 864.4010 General purpose...

21 CFR 864.4010 - General purpose reagent.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false General purpose reagent. 864.4010 Section 864.4010 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Specimen Preparation Reagents § 864.4010 General purpose...

21 CFR 864.4010 - General purpose reagent.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false General purpose reagent. 864.4010 Section 864.4010 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Specimen Preparation Reagents § 864.4010 General purpose...

A Correlation-Based Transition Model using Local Variables. Part 1; Model Formation

NASA Technical Reports Server (NTRS)

Menter, F. R.; Langtry, R. B.; Likki, S. R.; Suzen, Y. B.; Huang, P. G.; Volker, S.

2006-01-01

A new correlation-based transition model has been developed, which is based strictly on local variables. As a result, the transition model is compatible with modern computational fluid dynamics (CFD) approaches, such as unstructured grids and massive parallel execution. The model is based on two transport equations, one for intermittency and one for the transition onset criteria in terms of momentum thickness Reynolds number. The proposed transport equations do not attempt to model the physics of the transition process (unlike, e.g., turbulence models) but from a framework for the implementation of correlation-based models into general-purpose CFD methods.

Access Control Model for Sharing Composite Electronic Health Records

NASA Astrophysics Data System (ADS)

Jin, Jing; Ahn, Gail-Joon; Covington, Michael J.; Zhang, Xinwen

The adoption of electronically formatted medical records, so called Electronic Health Records (EHRs), has become extremely important in healthcare systems to enable the exchange of medical information among stakeholders. An EHR generally consists of data with different types and sensitivity degrees which must be selectively shared based on the need-to-know principle. Security mechanisms are required to guarantee that only authorized users have access to specific portions of such critical record for legitimate purposes. In this paper, we propose a novel approach for modelling access control scheme for composite EHRs. Our model formulates the semantics and structural composition of an EHR document, from which we introduce a notion of authorized zones of the composite EHR at different granularity levels, taking into consideration of several important criteria such as data types, intended purposes and information sensitivities.

Application of a Computerized General Purpose Information Management System (SELGEM) to Medically Important Arthropods (Diptera: Culcidae).

DTIC Science & Technology

1980-06-01

COMPUTERIZED GENERAL PURPOSE INFORMATION MANAGEMENT SYSTEM (SELGE.M) TO KEDICALLY IMPORTANT ARTHROPODS (DIPTERA: CULICIDAE) Annual Report Terry L. Erwin June...GENERAL PURPOSE INFORMATION MANAGEMENT SYSTEM Annual--1 September 1979- (SEIGEM) TO MEDICALLY ThWORTANT ARTHROPODS 30 May 1980 (DIPTERA: CULICIDAE) 6

The valuation of the EQ-5D in Portugal.

PubMed

Ferreira, Lara N; Ferreira, Pedro L; Pereira, Luis N; Oppe, Mark

2014-03-01

The EQ-5D is a preference-based measure widely used in cost-utility analysis (CUA). Several countries have conducted surveys to derive value sets, but this was not the case for Portugal. The purpose of this study was to estimate a value set for the EQ-5D for Portugal using the time trade-off (TTO). A representative sample of the Portuguese general population (n = 450) stratified by age and gender valued 24 health states. Face-to-face interviews were conducted by trained interviewers. Each respondent ranked and valued seven health states using the TTO. Several models were estimated at both the individual and aggregated levels to predict health state valuations. Alternative functional forms were considered to account for the skewed distribution of these valuations. The models were analyzed in terms of their coefficients, overall fit and the ability for predicting the TTO values. Random effects models were estimated using generalized least squares and were robust across model specification. The results are generally consistent with other value sets. This research provides the Portuguese EQ-5D value set based on the preferences of the Portuguese general population as measured by the TTO. This value set is recommended for use in CUA conducted in Portugal.

A Correlation-Based Transition Model using Local Variables. Part 2; Test Cases and Industrial Applications

NASA Technical Reports Server (NTRS)

Langtry, R. B.; Menter, F. R.; Likki, S. R.; Suzen, Y. B.; Huang, P. G.; Volker, S.

2006-01-01

A new correlation-based transition model has been developed, which is built strictly on local variables. As a result, the transition model is compatible with modern computational fluid dynamics (CFD) methods using unstructured grids and massive parallel execution. The model is based on two transport equations, one for the intermittency and one for the transition onset criteria in terms of momentum thickness Reynolds number. The proposed transport equations do not attempt to model the physics of the transition process (unlike, e.g., turbulence models), but form a framework for the implementation of correlation-based models into general-purpose CFD methods.

Development and validation of a general purpose linearization program for rigid aircraft models

NASA Technical Reports Server (NTRS)

Duke, E. L.; Antoniewicz, R. F.

1985-01-01

A FORTRAN program that provides the user with a powerful and flexible tool for the linearization of aircraft models is discussed. The program LINEAR numerically determines a linear systems model using nonlinear equations of motion and a user-supplied, nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both the state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model. Also, included in the report is a comparison of linear and nonlinear models for a high performance aircraft.

Training and generalization of affective behavior displayed by youth with autism.

PubMed Central

Gena, A; Krantz, P J; McClannahan, L E; Poulson, C L

1996-01-01

The purpose of this study was to teach contextually appropriate affective behavior to 4 youths with autism. Treatment consisted of modeling, prompting, and reinforcement introduced in a multiple baseline design across response categories of affective behavior. During treatment, verbal praise and tokens were delivered contingent on appropriate affective responding during training trials. Modeling and verbal prompting were used as correction procedures. Each youth received treatment in either three or four response categories. Treatment systematically increased responding within the response categories for all 4 participants, with effects being specific to the affective response categories under treatment. Treatment effects occurred across untrained scenarios, therapists, time, and settings, suggesting that generalization had occurred. PMID:8926222

A general model of the planetary radiation pressure on a satellite with a complex shape

NASA Technical Reports Server (NTRS)

Borderies, Nicole

1990-01-01

The purpose of this paper is to present a general model for the acceleration exerted on a spacecraft by the radiation coming from a planet. Both the solar radiation reflected by the planet and the thermal emission associated with its temperature are considered. The planet albedo and the planet emissive power are expanded in spherical harmonics with respect to an equatorial reference frame attached to the planet. The satellite external surface is assumed to consist of a juxtaposition of planar surfaces. A particular choice of variables allows to reduce the surface integrals over the lit portion of the planet visible to the satellite to one-dimension integrals.

Investigation of Dynamic and Physical Processes in the Upper Troposphere and Lower Stratosphere

NASA Technical Reports Server (NTRS)

Selkirk, Henry B.; Pfister, Leonhard (Technical Monitor)

2002-01-01

Research under this Cooperative Agreement has been funded by several NASA Earth Science programs: the Atmospheric Effects of Radiation Program (AEAP), the Upper Atmospheric Research Program (UARP), and most recently the Atmospheric Chemistry and Modeling Assessment Program (ACMAP). The purpose of the AEAP was to understand the impact of the present and future fleets of conventional jet traffic on the upper troposphere and lower stratosphere, while complementary airborne observations under UARP seek to understand the complex interactions of dynamical and chemical processes that affect the ozone layer. The ACMAP is a more general program of modeling and data analysis in the general area of atmospheric chemistry and dynamics, and the Radiation Sciences program.

Benchmarking electrophysiological models of human atrial myocytes

PubMed Central

Wilhelms, Mathias; Hettmann, Hanne; Maleckar, Mary M.; Koivumäki, Jussi T.; Dössel, Olaf; Seemann, Gunnar

2013-01-01

Mathematical modeling of cardiac electrophysiology is an insightful method to investigate the underlying mechanisms responsible for arrhythmias such as atrial fibrillation (AF). In past years, five models of human atrial electrophysiology with different formulations of ionic currents, and consequently diverging properties, have been published. The aim of this work is to give an overview of strengths and weaknesses of these models depending on the purpose and the general requirements of simulations. Therefore, these models were systematically benchmarked with respect to general mathematical properties and their ability to reproduce certain electrophysiological phenomena, such as action potential (AP) alternans. To assess the models' ability to replicate modified properties of human myocytes and tissue in cardiac disease, electrical remodeling in chronic atrial fibrillation (cAF) was chosen as test case. The healthy and remodeled model variants were compared with experimental results in single-cell, 1D and 2D tissue simulations to investigate AP and restitution properties, as well as the initiation of reentrant circuits. PMID:23316167

Option Fixation: A Cognitive Contributor to Overconfidence

ERIC Educational Resources Information Center

Sieck, Winston R.; Merkle, Edgar C.; Van Zandt, Trisha

2007-01-01

The ASC model of choice and confidence in general knowledge proposes that respondents first Assess the familiarity of presented options, and then use the high-familiarity option as a retrieval cue to Search memory for the purposes of Constructing an explanation about why that high-familiarity option is true. The ASC process implies that…

Catholic High Schools and Their Finances.

ERIC Educational Resources Information Center

Bredeweg, Frank H.

This study presents financial data on Catholic high schools in five enrollment ranges across the country. The two objectives of the study were to acquire general data for national purposes and to develop specific models for managing Catholic high schools. Nine tables of data are available for reference. The first part of this report deals with…

An Educational Tool for Outdoor Education and Environmental Concern

ERIC Educational Resources Information Center

Sandell, Klas; Ohman, Johan

2013-01-01

The purpose of this paper is to suggest an outdoor education model that respects the need to critically discuss the general belief in a causal relationship between experiences of nature, environmentally-friendly attitudes and behavioural change, but that at the same time respects the legitimate claims on the part of outdoor education practice for…

“Skill of Generalized Additive Model to Detect PM2.5 Health Signal in the Presence of Confounding Variables”

EPA Science Inventory

Summary. Measures of health outcomes are collinear with meteorology and air quality, making analysis of connections between human health and air quality difficult. The purpose of this analysis was to determine time scales and periods shared by the variables of interest (and...

The Worker as Proteus: Understanding Occupational Adaptability.

ERIC Educational Resources Information Center

Faddis, Constance R.

The purpose of this paper is to review and synthesize what is known about occupational adaptability and to propose a heuristic model of the process(es) of adaptation in work. Following an introductory chapter, three chapters contain a review of literature that draws from many disciplines and presents an overview of human adaptation in general, as…

Bandura, Ross, and Ross: Observational Learning and the Bobo Doll

ERIC Educational Resources Information Center

Artino, Anthony R., Jr.

2007-01-01

Since the publication of their seminal article entitled, "Transmission of Aggression Through Imitation of Aggressive Models" (Bandura, Ross, & Ross, 1961), the work of Albert Bandura and his co-authors has had an immeasurable impact on the field of psychology, in general, and educational psychology, more specifically. The purpose of this report is…

Contracts, Choice, and Customer Service: Marketization and Public Engagement in Education

ERIC Educational Resources Information Center

Cucchiara, Maia Bloomfield; Gold, Eva; Simon, Elaine

2011-01-01

Background/Context: Market models of school reform are having a major impact on school districts across the country. While scholars have examined many aspects of this process, we know far less about the general effects of marketization on public participation in education and local education politics. Purpose/Objective/Research Question/Focus of…

Design of Education Methods in a Virtual Environment

ERIC Educational Resources Information Center

Yavich, Roman; Starichenko, Boris

2017-01-01

The purpose of the presented article is to review existing approaches to modern training methods design and to create a variant of its technology in virtual educational environments in order to develop general cultural and professional students' competence in pedagogical education. The conceptual modeling of a set of methods for students' training…

Developing a Classroom Management Plan Using a Tiered Approach

ERIC Educational Resources Information Center

Sayeski, Kristin L.; Brown, Monica R.

2011-01-01

In this article, the authors present a response-to-intervention (RTI) framework that both special and general education teachers can use in evaluating existing class structures and developing comprehensive classroom management plans for the purpose of managing challenging behaviors. They applied the concept of a three-tiered model of support at…

41 CFR 109-38.5103 - Motor vehicle utilization standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... are established for DOE as objectives for those motor vehicles operated generally for those purposes for which acquired: (1) Sedans and station wagons, general purpose use—12,000 miles per year. (2) Light trucks (4×2's) and general purpose vehicles, one ton and under (less than 12,500 GVWR)—10,000...

41 CFR 109-38.5103 - Motor vehicle utilization standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... are established for DOE as objectives for those motor vehicles operated generally for those purposes for which acquired: (1) Sedans and station wagons, general purpose use—12,000 miles per year. (2) Light trucks (4×2's) and general purpose vehicles, one ton and under (less than 12,500 GVWR)—10,000...

76 FR 76954 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-09

... Bombs, 1000 BLU-117 2000lb General Purpose Bombs, 600 BLU-109 2000lb Hard Target Penetrator Bombs, and four BDU-50C inert bombs, fuzes, weapons integration, munitions trainers, personnel training and... kits, 3300 BLU-111 500lb General Purpose Bombs, 1000 BLU-117 2000lb General Purpose Bombs, 600 BLU-109...

41 CFR 60-741.40 - General purpose and applicability of the affirmative action program requirement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 41 Public Contracts and Property Management 1 2014-07-01 2014-07-01 false General purpose and... Property Management Other Provisions Relating to Public Contracts OFFICE OF FEDERAL CONTRACT COMPLIANCE... requirement. (a) General purpose. An affirmative action program is a management tool designed to ensure equal...

Application of a Computerized General Purpose Information Management System (SELGEM) (SELf-GEnerating Master) to Medically Important Arthropods (Diptera: Culicidae).

DTIC Science & Technology

1982-07-01

GENERAL PURPOSE INFORMATION MANAGEMENT SYSTEM (SELGEM) TO MEDICALLY 0 IMPORTANT ARTHROPODS (DIPTERA: CULICIDAE) oAnnual Report Terry L. Erwin July...APPLICATION OF A COMPUTERIZED GENERAL PURPOSE Annual Report INFORMATION MANAGEMENT SYSTEM (SELGEM) TO July 1981 to June 1982 MEDICALLY IMPORTANT ARTHROPODS

Tools reference manual for a Requirements Specification Language (RSL), version 2.0

NASA Technical Reports Server (NTRS)

Fisher, Gene L.; Cohen, Gerald C.

1993-01-01

This report describes a general-purpose Requirements Specification Language, RSL. The purpose of RSL is to specify precisely the external structure of a mechanized system and to define requirements that the system must meet. A system can be comprised of a mixture of hardware, software, and human processing elements. RSL is a hybrid of features found in several popular requirements specification languages, such as SADT (Structured Analysis and Design Technique), PSL (Problem Statement Language), and RMF (Requirements Modeling Framework). While languages such as these have useful features for structuring a specification, they generally lack formality. To overcome the deficiencies of informal requirements languages, RSL has constructs for formal mathematical specification. These constructs are similar to those found in formal specification languages such as EHDM (Enhanced Hierarchical Development Methodology), Larch, and OBJ3.

Real-time traffic sign recognition based on a general purpose GPU and deep-learning.

PubMed

Lim, Kwangyong; Hong, Yongwon; Choi, Yeongwoo; Byun, Hyeran

2017-01-01

We present a General Purpose Graphics Processing Unit (GPGPU) based real-time traffic sign detection and recognition method that is robust against illumination changes. There have been many approaches to traffic sign recognition in various research fields; however, previous approaches faced several limitations when under low illumination or wide variance of light conditions. To overcome these drawbacks and improve processing speeds, we propose a method that 1) is robust against illumination changes, 2) uses GPGPU-based real-time traffic sign detection, and 3) performs region detecting and recognition using a hierarchical model. This method produces stable results in low illumination environments. Both detection and hierarchical recognition are performed in real-time, and the proposed method achieves 0.97 F1-score on our collective dataset, which uses the Vienna convention traffic rules (Germany and South Korea).

Development of an integrated BEM approach for hot fluid structure interaction

NASA Technical Reports Server (NTRS)

Dargush, Gary F.; Banerjee, Prasanta K.; Dunn, Michael G.

1988-01-01

Significant progress was made toward the goal of developing a general purpose boundary element method for hot fluid-structure interaction. For the solid phase, a boundary-only formulation was developed and implemented for uncoupled transient thermoelasticity in two dimensions. The elimination of volume discretization not only drastically reduces required modeling effort, but also permits unconstrained variation of the through-the-thickness temperature distribution. Meanwhile, for the fluids, fundamental solutions were derived for transient incompressible and compressible flow in the absence of the convective terms. Boundary element formulations were developed and described. For the incompressible case, the necessary kernal functions, under transient and steady-state conditions, were derived and fully implemented into a general purpose, multi-region boundary element code. Several examples were examined to study the suitability and convergence characteristics of the various algorithms.

Learning coefficient of generalization error in Bayesian estimation and vandermonde matrix-type singularity.

PubMed

Aoyagi, Miki; Nagata, Kenji

2012-06-01

The term algebraic statistics arises from the study of probabilistic models and techniques for statistical inference using methods from algebra and geometry (Sturmfels, 2009 ). The purpose of our study is to consider the generalization error and stochastic complexity in learning theory by using the log-canonical threshold in algebraic geometry. Such thresholds correspond to the main term of the generalization error in Bayesian estimation, which is called a learning coefficient (Watanabe, 2001a , 2001b ). The learning coefficient serves to measure the learning efficiencies in hierarchical learning models. In this letter, we consider learning coefficients for Vandermonde matrix-type singularities, by using a new approach: focusing on the generators of the ideal, which defines singularities. We give tight new bound values of learning coefficients for the Vandermonde matrix-type singularities and the explicit values with certain conditions. By applying our results, we can show the learning coefficients of three-layered neural networks and normal mixture models.

1D-3D hybrid modeling-from multi-compartment models to full resolution models in space and time.

PubMed

Grein, Stephan; Stepniewski, Martin; Reiter, Sebastian; Knodel, Markus M; Queisser, Gillian

2014-01-01

Investigation of cellular and network dynamics in the brain by means of modeling and simulation has evolved into a highly interdisciplinary field, that uses sophisticated modeling and simulation approaches to understand distinct areas of brain function. Depending on the underlying complexity, these models vary in their level of detail, in order to cope with the attached computational cost. Hence for large network simulations, single neurons are typically reduced to time-dependent signal processors, dismissing the spatial aspect of each cell. For single cell or networks with relatively small numbers of neurons, general purpose simulators allow for space and time-dependent simulations of electrical signal processing, based on the cable equation theory. An emerging field in Computational Neuroscience encompasses a new level of detail by incorporating the full three-dimensional morphology of cells and organelles into three-dimensional, space and time-dependent, simulations. While every approach has its advantages and limitations, such as computational cost, integrated and methods-spanning simulation approaches, depending on the network size could establish new ways to investigate the brain. In this paper we present a hybrid simulation approach, that makes use of reduced 1D-models using e.g., the NEURON simulator-which couples to fully resolved models for simulating cellular and sub-cellular dynamics, including the detailed three-dimensional morphology of neurons and organelles. In order to couple 1D- and 3D-simulations, we present a geometry-, membrane potential- and intracellular concentration mapping framework, with which graph- based morphologies, e.g., in the swc- or hoc-format, are mapped to full surface and volume representations of the neuron and computational data from 1D-simulations can be used as boundary conditions for full 3D simulations and vice versa. Thus, established models and data, based on general purpose 1D-simulators, can be directly coupled to the emerging field of fully resolved, highly detailed 3D-modeling approaches. We present the developed general framework for 1D/3D hybrid modeling and apply it to investigate electrically active neurons and their intracellular spatio-temporal calcium dynamics.

A bottom-up evolution of terrestrial ecosystem modeling theory, and ideas toward global vegetation modeling

NASA Technical Reports Server (NTRS)

Running, Steven W.

1992-01-01

A primary purpose of this review is to convey lessons learned in the development of a forest ecosystem modeling approach, from it origins in 1973 as a single-tree water balance model to the current regional applications. The second intent is to use this accumulated experience to offer ideas of how terrestrial ecosystem modeling can be taken to the global scale: earth systems modeling. A logic is suggested where mechanistic ecosystem models are not themselves operated globally, but rather are used to 'calibrate' much simplified models, primarily driven by remote sensing, that could be implemented in a semiautomated way globally, and in principle could interface with atmospheric general circulation models (GCM's).

Introducing DeBRa: a detailed breast model for radiological studies

NASA Astrophysics Data System (ADS)

Ma, Andy K. W.; Gunn, Spencer; Darambara, Dimitra G.

2009-07-01

Currently, x-ray mammography is the method of choice in breast cancer screening programmes. As the mammography technology moves from 2D imaging modalities to 3D, conventional computational phantoms do not have sufficient detail to support the studies of these advanced imaging systems. Studies of these 3D imaging systems call for a realistic and sophisticated computational model of the breast. DeBRa (Detailed Breast model for Radiological studies) is the most advanced, detailed, 3D computational model of the breast developed recently for breast imaging studies. A DeBRa phantom can be constructed to model a compressed breast, as in film/screen, digital mammography and digital breast tomosynthesis studies, or a non-compressed breast as in positron emission mammography and breast CT studies. Both the cranial-caudal and mediolateral oblique views can be modelled. The anatomical details inside the phantom include the lactiferous duct system, the Cooper ligaments and the pectoral muscle. The fibroglandular tissues are also modelled realistically. In addition, abnormalities such as microcalcifications, irregular tumours and spiculated tumours are inserted into the phantom. Existing sophisticated breast models require specialized simulation codes. Unlike its predecessors, DeBRa has elemental compositions and densities incorporated into its voxels including those of the explicitly modelled anatomical structures and the noise-like fibroglandular tissues. The voxel dimensions are specified as needed by any study and the microcalcifications are embedded into the voxels so that the microcalcification sizes are not limited by the voxel dimensions. Therefore, DeBRa works with general-purpose Monte Carlo codes. Furthermore, general-purpose Monte Carlo codes allow different types of imaging modalities and detector characteristics to be simulated with ease. DeBRa is a versatile and multipurpose model specifically designed for both x-ray and γ-ray imaging studies.

An empirical model of diagnostic x-ray attenuation under narrow-beam geometry

PubMed Central

Mathieu, Kelsey B.; Kappadath, S. Cheenu; White, R. Allen; Atkinson, E. Neely; Cody, Dianna D.

2011-01-01

Purpose: The purpose of this study was to develop and validate a mathematical model to describe narrow-beam attenuation of kilovoltage x-ray beams for the intended applications of half-value layer (HVL) and quarter-value layer (QVL) estimations, patient organ shielding, and computer modeling. Methods: An empirical model, which uses the Lambert W function and represents a generalized Lambert-Beer law, was developed. To validate this model, transmission of diagnostic energy x-ray beams was measured over a wide range of attenuator thicknesses [0.49–33.03 mm Al on a computed tomography (CT) scanner, 0.09–1.93 mm Al on two mammography systems, and 0.1–0.45 mm Cu and 0.49–14.87 mm Al using general radiography]. Exposure measurements were acquired under narrow-beam geometry using standard methods, including the appropriate ionization chamber, for each radiographic system. Nonlinear regression was used to find the best-fit curve of the proposed Lambert W model to each measured transmission versus attenuator thickness data set. In addition to validating the Lambert W model, we also assessed the performance of two-point Lambert W interpolation compared to traditional methods for estimating the HVL and QVL [i.e., semilogarithmic (exponential) and linear interpolation]. Results: The Lambert W model was validated for modeling attenuation versus attenuator thickness with respect to the data collected in this study (R2 > 0.99). Furthermore, Lambert W interpolation was more accurate and less sensitive to the choice of interpolation points used to estimate the HVL and∕or QVL than the traditional methods of semilogarithmic and linear interpolation. Conclusions: The proposed Lambert W model accurately describes attenuation of both monoenergetic radiation and (kilovoltage) polyenergetic beams (under narrow-beam geometry). PMID:21928626

An empirical model of diagnostic x-ray attenuation under narrow-beam geometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mathieu, Kelsey B.; Kappadath, S. Cheenu; White, R. Allen

2011-08-15

Purpose: The purpose of this study was to develop and validate a mathematical model to describe narrow-beam attenuation of kilovoltage x-ray beams for the intended applications of half-value layer (HVL) and quarter-value layer (QVL) estimations, patient organ shielding, and computer modeling. Methods: An empirical model, which uses the Lambert W function and represents a generalized Lambert-Beer law, was developed. To validate this model, transmission of diagnostic energy x-ray beams was measured over a wide range of attenuator thicknesses [0.49-33.03 mm Al on a computed tomography (CT) scanner, 0.09-1.93 mm Al on two mammography systems, and 0.1-0.45 mm Cu and 0.49-14.87more » mm Al using general radiography]. Exposure measurements were acquired under narrow-beam geometry using standard methods, including the appropriate ionization chamber, for each radiographic system. Nonlinear regression was used to find the best-fit curve of the proposed Lambert W model to each measured transmission versus attenuator thickness data set. In addition to validating the Lambert W model, we also assessed the performance of two-point Lambert W interpolation compared to traditional methods for estimating the HVL and QVL [i.e., semilogarithmic (exponential) and linear interpolation]. Results: The Lambert W model was validated for modeling attenuation versus attenuator thickness with respect to the data collected in this study (R{sup 2} > 0.99). Furthermore, Lambert W interpolation was more accurate and less sensitive to the choice of interpolation points used to estimate the HVL and/or QVL than the traditional methods of semilogarithmic and linear interpolation. Conclusions: The proposed Lambert W model accurately describes attenuation of both monoenergetic radiation and (kilovoltage) polyenergetic beams (under narrow-beam geometry).« less

Ndarts

NASA Technical Reports Server (NTRS)

Jain, Abhinandan

2011-01-01

Ndarts software provides algorithms for computing quantities associated with the dynamics of articulated, rigid-link, multibody systems. It is designed as a general-purpose dynamics library that can be used for the modeling of robotic platforms, space vehicles, molecular dynamics, and other such applications. The architecture and algorithms in Ndarts are based on the Spatial Operator Algebra (SOA) theory for computational multibody and robot dynamics developed at JPL. It uses minimal, internal coordinate models. The algorithms are low-order, recursive scatter/ gather algorithms. In comparison with the earlier Darts++ software, this version has a more general and cleaner design needed to support a larger class of computational dynamics needs. It includes a frames infrastructure, allows algorithms to operate on subgraphs of the system, and implements lazy and deferred computation for better efficiency. Dynamics modeling modules such as Ndarts are core building blocks of control and simulation software for space, robotic, mechanism, bio-molecular, and material systems modeling.

Generalized Fluid System Simulation Program (GFSSP) - Version 6

NASA Technical Reports Server (NTRS)

Majumdar, Alok; LeClair, Andre; Moore, Ric; Schallhorn, Paul

2015-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependent flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors, flow control valves and external body forces such as gravity and centrifugal. The thermo-fluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the 'point, drag, and click' method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids, and 24 different resistance/source options are provided for modeling momentum sources or sinks in the branches. Users can introduce new physics, non-linear and time-dependent boundary conditions through user-subroutine.

Generalized Fluid System Simulation Program, Version 6.0

NASA Technical Reports Server (NTRS)

Majumdar, A. K.; LeClair, A. C.; Moore, A.; Schallhorn, P. A.

2013-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependant flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors and external body forces such as gravity and centrifugal. The thermo-fluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the 'point, drag, and click' method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids, and 24 different resistance/source options are provided for modeling momentum sources or sinks in the branches. This Technical Memorandum illustrates the application and verification of the code through 25 demonstrated example problems.

Generalized Fluid System Simulation Program, Version 5.0-Educational

NASA Technical Reports Server (NTRS)

Majumdar, A. K.

2011-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependent flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors and external body forces such as gravity and centrifugal. The thermofluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the point, drag and click method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids and 21 different resistance/source options are provided for modeling momentum sources or sinks in the branches. This Technical Memorandum illustrates the application and verification of the code through 12 demonstrated example problems.

77 FR 9899 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-21

... Medium Range Air-to-Air Missiles, 42 GBU-49 Enhanced PAVEWAY II 500 lb Bombs, 200 GBU-54 (2000 lb) Laser Joint Direct Attack Munitions (JDAM) Bombs, 642 BLU-111 (500 lb) General Purpose Bombs, 127 MK-82 (500 lb) General Purpose Bombs, 80 BLU-117 (2000 lb) General Purpose Bombs, 4 MK-84 (2000 lb) Inert...

78 FR 39947 - To Modify Duty-Free Treatment Under the Generalized System of Preferences and for Other Purposes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... Treatment Under the Generalized System of Preferences and for Other Purposes #0; #0; #0; Presidential... Modify Duty-Free Treatment Under the Generalized System of Preferences and for Other Purposes By the... competitive need limitations on the preferential treatment afforded under the GSP to eligible articles. 4...

Identification of aerodynamic models for maneuvering aircraft

NASA Technical Reports Server (NTRS)

Lan, C. Edward; Hu, C. C.

1992-01-01

The method based on Fourier functional analysis and indicial formulation for aerodynamic modeling as proposed by Chin and Lan is extensively examined and improved for the purpose of general applications to realistic airplane configurations. Improvement is made to automate the calculation of model coefficients, and to evaluate more accurately the indicial integral. Test data of large angle-of-attack ranges for two different models, a 70 deg. delta wing and an F-18 model, are used to further verify the applicability of Fourier functional analysis and validate the indicial formulation. The results show that the general expression for harmonic motions throughout a range of k is capable of accurately modeling the nonlinear responses with large phase lag except in the region where an inconsistent hysteresis behavior from one frequency to the other occurs. The results by the indicial formulation indicate that more accurate results can be obtained when the motion starts from a low angle of attack where hysteresis effect is not important.

Stochastic nature of Landsat MSS data

NASA Technical Reports Server (NTRS)

Labovitz, M. L.; Masuoka, E. J.

1987-01-01

A multiple series generalization of the ARIMA models is used to model Landsat MSS scan lines as sequences of vectors, each vector having four elements (bands). The purpose of this work is to investigate if Landsat scan lines can be described by a general multiple series linear stochastic model and if the coefficients of such a model vary as a function of satellite system and target attributes. To accomplish this objective, an exploratory experimental design was set up incorporating six factors, four representing target attributes - location, cloud cover, row (within location), and column (within location) - and two factors representing system attributes - satellite number and detector bank. Each factor was included in the design at two levels and, with two replicates per treatment, 128 scan lines were analyzed. The results of the analysis suggests that a multiple AR(4) model is an adequate representation across all scan lines. Furthermore, the coefficients of the AR(4) model vary with location, particularly changes in physiography (slope regimes), and with percent cloud cover, but are insensitive to changes in system attributes.

Computing Thermal Effects of Cavitation in Cryogenic Liquids

NASA Technical Reports Server (NTRS)

Hosangadi, Ashvin; Ahuja, Vineet; Dash, Sanford M.

2005-01-01

A computer program implements a numerical model of thermal effects of cavitation in cryogenic fluids. The model and program were developed for use in designing and predicting the performances of turbopumps for cryogenic fluids. Prior numerical models used for this purpose do not account for either the variability of properties of cryogenic fluids or the thermal effects (especially, evaporative cooling) involved in cavitation. It is important to account for both because in a cryogenic fluid, the thermal effects of cavitation are substantial, and the cavitation characteristics are altered by coupling between the variable fluid properties and the phase changes involved in cavitation. The present model accounts for both thermal effects and variability of properties by incorporating a generalized representation of the properties of cryogenic fluids into a generalized compressible-fluid formulation for a cavitating pump. The model has been extensively validated for liquid nitrogen and liquid hydrogen. Using the available data on the properties of these fluids, the model has been shown to predict accurate temperature-depression values.

Human Judgment and Decision Making: A Proposed Decision Model Using Sequential Processing

DTIC Science & Technology

1985-08-01

to the issues noted above is called policy capturing ( Szilagyi and Wallace , 1983). 4 The purpose of policy capturing is to develop a decision making...papers have been written on this general subject. A concise overview of this discipline is found in Szilagyi and Wallace (1983). Basically, decision models... Szilagyi , A. and Wallace , H. Organizational Behavior and Performance (3rd Ed.), Scott, Foresman and Company, 1983. Taylor, R. L. and Wilsted, W. D

Design of Low-Cost Impact Reporting System

DTIC Science & Technology

2015-12-01

Single Board Computers (SBC) available. Arduino and Raspberry Pi are very low cost and have huge communities for hardware design. Most of the SBC... Raspberry Pi Model B has a considerably faster processor than the Arduino. Although it provides only approximately 25 General Purpose Input and Output...reporting system must be able to operate on its own power for more than 2 or 3 hours. The Raspberry Pi Model B operates on 5 volts direct current at

MULTI: a shared memory approach to cooperative molecular modeling.

PubMed

Darden, T; Johnson, P; Smith, H

1991-03-01

A general purpose molecular modeling system, MULTI, based on the UNIX shared memory and semaphore facilities for interprocess communication is described. In addition to the normal querying or monitoring of geometric data, MULTI also provides processes for manipulating conformations, and for displaying peptide or nucleic acid ribbons, Connolly surfaces, close nonbonded contacts, crystal-symmetry related images, least-squares superpositions, and so forth. This paper outlines the basic techniques used in MULTI to ensure cooperation among these specialized processes, and then describes how they can work together to provide a flexible modeling environment.

A SCILAB Program for Computing General-Relativistic Models of Rotating Neutron Stars by Implementing Hartle's Perturbation Method

NASA Astrophysics Data System (ADS)

Papasotiriou, P. J.; Geroyannis, V. S.

We implement Hartle's perturbation method to the computation of relativistic rigidly rotating neutron star models. The program has been written in SCILAB (© INRIA ENPC), a matrix-oriented high-level programming language. The numerical method is described in very detail and is applied to many models in slow or fast rotation. We show that, although the method is perturbative, it gives accurate results for all practical purposes and it should prove an efficient tool for computing rapidly rotating pulsars.

The MSFC UNIVAC 1108 EXEC 8 simulation model

NASA Technical Reports Server (NTRS)

Williams, T. G.; Richards, F. M.; Weatherbee, J. E.; Paul, L. K.

1972-01-01

A model is presented which simulates the MSFC Univac 1108 multiprocessor system. The hardware/operating system is described to enable a good statistical measurement of the system behavior. The performance of the 1108 is evaluated by performing twenty-four different experiments designed to locate system bottlenecks and also to test the sensitivity of system throughput with respect to perturbation of the various Exec 8 scheduling algorithms. The model is implemented in the general purpose system simulation language and the techniques described can be used to assist in the design, development, and evaluation of multiprocessor systems.

Parameters estimation using the first passage times method in a jump-diffusion model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khaldi, K., E-mail: kkhaldi@umbb.dz; LIMOSE Laboratory, Boumerdes University, 35000; Meddahi, S., E-mail: samia.meddahi@gmail.com

2016-06-02

The main purposes of this paper are two contributions: (1) it presents a new method, which is the first passage time (FPT method) generalized for all passage times (GPT method), in order to estimate the parameters of stochastic Jump-Diffusion process. (2) it compares in a time series model, share price of gold, the empirical results of the estimation and forecasts obtained with the GPT method and those obtained by the moments method and the FPT method applied to the Merton Jump-Diffusion (MJD) model.

23 CFR 1.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Purpose. 1.1 Section 1.1 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.1 Purpose. The purpose of the regulations in this part is to implement and carry out the provisions of Federal law...

23 CFR 1.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Purpose. 1.1 Section 1.1 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.1 Purpose. The purpose of the regulations in this part is to implement and carry out the provisions of Federal law...

23 CFR 1.1 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Purpose. 1.1 Section 1.1 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.1 Purpose. The purpose of the regulations in this part is to implement and carry out the provisions of Federal law...

23 CFR 1.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Purpose. 1.1 Section 1.1 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.1 Purpose. The purpose of the regulations in this part is to implement and carry out the provisions of Federal law...

10 CFR 1002.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Purpose. 1002.1 Section 1002.1 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) OFFICIAL SEAL AND DISTINGUISHING FLAG General § 1002.1 Purpose. The purpose of this part is to describe the official seal and distinguishing flag of the Department of Energy, and to...

23 CFR 1.1 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Purpose. 1.1 Section 1.1 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.1 Purpose. The purpose of the regulations in this part is to implement and carry out the provisions of Federal law...

Formulation of strongly non-local, non-isothermal dynamics for heterogeneous solids based on the GENERIC with application to phase-field modeling

NASA Astrophysics Data System (ADS)

Hütter, Markus; Svendsen, Bob

2017-12-01

The purpose of the current work is the formulation of models for conservative and non-conservative dynamics in solid systems with the help of the General Equation for the Non-Equilibrium Reversible-Irreversible Coupling (GENERIC: e.g., Grmela and Öttinger, Phys. Rev. E 56(6), 6620 (1997); Öttinger and Grmela, Phys. Rev. E 56(6), 6633 (1997)). In this context, the resulting models are inherently spatially strongly non-local (i.e., functional) and non-isothermal in character. They are applicable in particular to the modeling of phase transitions as well as mass and heat transport in multiphase, multicomponent solids. In the last part of the work, the strongly non-local model formulation is reduced to weakly non-local form with the help of generalized gradient approximation of the energy and entropy functionals. On this basis, the current model formulation is shown to be consistent with and reduce to a recent non-isothermal generalization (Gladkov et al., J. Non-Equilib. Thermodyn. 41(2), 131 (2016)) of the well-known phase-field models of Cahn and Hilliard (J. Chem. Phys. 28(2), 258 (1958)) for conservative dynamics and of Allen and Cahn (Acta Metall. 27(6), 1085 (1979)) for non-conservative dynamics. Finally, the current approach is applied to derive a non-isothermal generalization of a phase-field crystal model for binary alloys (see, e.g., Elder et al., Phys. Rev. B 75(6), 064107 (2007)).

General purpose force doctrine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weltman, J.J.

In contemporary American strategic parlance, the general purpose forces have come to mean those forces intended for conflict situations other than nuclear war with the Soviet Union. As with all military forces, the general purpose forces are powerfully determined by prevailing conceptions of the problems they must meet and by institutional biases as to the proper way to deal with those problems. This paper deals with the strategic problems these forces are intended to meet, the various and often conflicting doctrines and organizational structures which have been generated in order to meet those problems, and the factors which will influencemore » general purpose doctrine and structure in the future. This paper does not attempt to prescribe technological solutions to the needs of the general purpose forces. Rather, it attempts to display the doctrinal and institutional context within which new technologies must operate, and which will largely determine whether these technologies are accepted into the force structure or not.« less

A general-purpose approach to computer-aided dynamic analysis of a flexible helicopter

NASA Technical Reports Server (NTRS)

Agrawal, Om P.

1988-01-01

A general purpose mathematical formulation is described for dynamic analysis of a helicopter consisting of flexible and/or rigid bodies that undergo large translations and rotations. Rigid body and elastic sets of generalized coordinates are used. The rigid body coordinates define the location and the orientation of a body coordinate frame (global frame) with respect to an inertial frame. The elastic coordinates are introduced using a finite element approach in order to model flexible components. The compatibility conditions between two adjacent elements in a flexible body are imposed using a Boolean matrix, whereas the compatibility conditions between two adjacent bodies are imposed using the Lagrange multiplier approach. Since the form of the constraint equations depends upon the type of kinematic joint and involves only the generalized coordinates of the two participating elements, then a library of constraint elements can be developed to impose the kinematic constraint in an automated fashion. For the body constraints, the Lagrange multipliers yield the reaction forces and torques of the bodies at the joints. The virtual work approach is used to derive the equations of motion, which are a system of differential and algebraic equations that are highly nonlinear. The formulation presented is general and is compared with hard-wired formulations commonly used in helicopter analysis.

Wind models for the NSTS ascent trajectory biasing for wind load alleviation

NASA Technical Reports Server (NTRS)

Smith, O. E.; Adelfang, S. I.; Batts, G. W.; Hill, C. K.

1989-01-01

New concepts are presented for aerospace vehicle ascent wind profile biasing. The purpose for wind biasing the ascent trajectory is to provide ascent wind loads relief and thus decrease the probability for launch delays due to wind loads exceeding critical limits. Wind biasing trajectories to the profile of monthly mean winds have been widely used for this purpose. The wind profile models presented give additional alternatives for wind biased trajectories. They are derived from the properties of the bivariate normal probability function using the available wind statistical parameters for the launch site. The analytical expressions are presented to permit generalizations. Specific examples are given to illustrate the procedures. The wind profile models can be used to establish the ascent trajectory steering commands to guide the vehicle through the first stage. For the National Space Transportation System (NSTS) program these steering commands are called I-loads.

Can Data be Organized for Science and Reuse?

NASA Astrophysics Data System (ADS)

Habermann, T.; Shasharina, S.; Jelenak, A.; Fillmore, D. W.

2015-12-01

The Data Life Cycle is an important general concept for thinking about data collection, management, and preservation practices across the geophysical scientific data community. The cycle generally spans the scientific process from ideation, through experimental design, observation collection, data analysis and visualization, publication, archive, distributions and eventual reuse. During the cycle, the data may change through new analyses, presentations, and responsible parties, but, historically, the format and organization of the data have generally remained the same. Data collected as a time series at a point remains as a time series and data collected/calculated as grids remains as grids. BIP is BIP and BSQ is BSQ. In fact, in many large data centers, the native format remains sacrosanct and, in the scientific community, reformatting is avoided because of fear of losing information or introducing data quality problems and irreproducible results. This traditional approach has worked well in areas where data are collected and used for a single purpose throughout the life cycle and domains where comparisons across different data sets are rare and problematic due to conflicting data organizational structures or incomplete documentation. This is not the world we live in today. Reuse for unexpected purposes and data (and model) comparisons are becoming increasingly common (e.g. climate model / observation comparisons). Data sets are preserved for future global investigators that may be unaware of the original project or purpose of the data. Also, it is becoming more common for data to be restructured and reformatted for particular problem or to support a flexible web service. Unfortunately, many of these efforts do not preserve the metadata that, hopefully, accompanies the data in the original format. In this presentation we will discuss alternative approaches to data management that will facilitate data reuse across teams and disciplines.

1D-3D hybrid modeling—from multi-compartment models to full resolution models in space and time

PubMed Central

Grein, Stephan; Stepniewski, Martin; Reiter, Sebastian; Knodel, Markus M.; Queisser, Gillian

2014-01-01

Investigation of cellular and network dynamics in the brain by means of modeling and simulation has evolved into a highly interdisciplinary field, that uses sophisticated modeling and simulation approaches to understand distinct areas of brain function. Depending on the underlying complexity, these models vary in their level of detail, in order to cope with the attached computational cost. Hence for large network simulations, single neurons are typically reduced to time-dependent signal processors, dismissing the spatial aspect of each cell. For single cell or networks with relatively small numbers of neurons, general purpose simulators allow for space and time-dependent simulations of electrical signal processing, based on the cable equation theory. An emerging field in Computational Neuroscience encompasses a new level of detail by incorporating the full three-dimensional morphology of cells and organelles into three-dimensional, space and time-dependent, simulations. While every approach has its advantages and limitations, such as computational cost, integrated and methods-spanning simulation approaches, depending on the network size could establish new ways to investigate the brain. In this paper we present a hybrid simulation approach, that makes use of reduced 1D-models using e.g., the NEURON simulator—which couples to fully resolved models for simulating cellular and sub-cellular dynamics, including the detailed three-dimensional morphology of neurons and organelles. In order to couple 1D- and 3D-simulations, we present a geometry-, membrane potential- and intracellular concentration mapping framework, with which graph- based morphologies, e.g., in the swc- or hoc-format, are mapped to full surface and volume representations of the neuron and computational data from 1D-simulations can be used as boundary conditions for full 3D simulations and vice versa. Thus, established models and data, based on general purpose 1D-simulators, can be directly coupled to the emerging field of fully resolved, highly detailed 3D-modeling approaches. We present the developed general framework for 1D/3D hybrid modeling and apply it to investigate electrically active neurons and their intracellular spatio-temporal calcium dynamics. PMID:25120463

SCNS: a graphical tool for reconstructing executable regulatory networks from single-cell genomic data.

PubMed

Woodhouse, Steven; Piterman, Nir; Wintersteiger, Christoph M; Göttgens, Berthold; Fisher, Jasmin

2018-05-25

Reconstruction of executable mechanistic models from single-cell gene expression data represents a powerful approach to understanding developmental and disease processes. New ambitious efforts like the Human Cell Atlas will soon lead to an explosion of data with potential for uncovering and understanding the regulatory networks which underlie the behaviour of all human cells. In order to take advantage of this data, however, there is a need for general-purpose, user-friendly and efficient computational tools that can be readily used by biologists who do not have specialist computer science knowledge. The Single Cell Network Synthesis toolkit (SCNS) is a general-purpose computational tool for the reconstruction and analysis of executable models from single-cell gene expression data. Through a graphical user interface, SCNS takes single-cell qPCR or RNA-sequencing data taken across a time course, and searches for logical rules that drive transitions from early cell states towards late cell states. Because the resulting reconstructed models are executable, they can be used to make predictions about the effect of specific gene perturbations on the generation of specific lineages. SCNS should be of broad interest to the growing number of researchers working in single-cell genomics and will help further facilitate the generation of valuable mechanistic insights into developmental, homeostatic and disease processes.

Contaminant deposition building shielding factors for US residential structures.

PubMed

Dickson, Elijah; Hamby, David; Eckerman, Keith

2017-10-10

This paper presents validated building shielding factors designed for contemporary US housing-stock under an idealized, yet realistic, exposure scenario from contaminant deposition on the roof and surrounding surfaces. The building shielding factors are intended for use in emergency planning and level three probabilistic risk assessments for a variety of postulated radiological events in which a realistic assessment is necessary to better understand the potential risks for accident mitigation and emergency response planning. Factors are calculated from detailed computational housing-units models using the general-purpose Monte Carlo N-Particle computational code, MCNP5, and are benchmarked from a series of narrow- and broad-beam measurements analyzing the shielding effectiveness of ten common general-purpose construction materials and ten shielding models representing the primary weather barriers (walls and roofs) of likely US housing-stock. Each model was designed to scale based on common residential construction practices and include, to the extent practical, all structurally significant components important for shielding against ionizing radiation. Calculations were performed for floor-specific locations from contaminant deposition on the roof and surrounding ground as well as for computing a weighted-average representative building shielding factor for single- and multi-story detached homes, both with and without basement as well for single-wide manufactured housing-unit. © 2017 IOP Publishing Ltd.

Contaminant deposition building shielding factors for US residential structures.

PubMed

Dickson, E D; Hamby, D M; Eckerman, K F

2015-06-01

This paper presents validated building shielding factors designed for contemporary US housing-stock under an idealized, yet realistic, exposure scenario from contaminant deposition on the roof and surrounding surfaces. The building shielding factors are intended for use in emergency planning and level three probabilistic risk assessments for a variety of postulated radiological events in which a realistic assessment is necessary to better understand the potential risks for accident mitigation and emergency response planning. Factors are calculated from detailed computational housing-units models using the general-purpose Monte Carlo N-Particle computational code, MCNP5, and are benchmarked from a series of narrow- and broad-beam measurements analyzing the shielding effectiveness of ten common general-purpose construction materials and ten shielding models representing the primary weather barriers (walls and roofs) of likely US housing-stock. Each model was designed to scale based on common residential construction practices and include, to the extent practical, all structurally significant components important for shielding against ionizing radiation. Calculations were performed for floor-specific locations from contaminant deposition on the roof and surrounding ground as well as for computing a weighted-average representative building shielding factor for single- and multi-story detached homes, both with and without basement as well for single-wide manufactured housing-unit.

Engine dynamic analysis with general nonlinear finite element codes. Part 2: Bearing element implementation overall numerical characteristics and benchmaking

NASA Technical Reports Server (NTRS)

Padovan, J.; Adams, M.; Fertis, J.; Zeid, I.; Lam, P.

1982-01-01

Finite element codes are used in modelling rotor-bearing-stator structure common to the turbine industry. Engine dynamic simulation is used by developing strategies which enable the use of available finite element codes. benchmarking the elements developed are benchmarked by incorporation into a general purpose code (ADINA); the numerical characteristics of finite element type rotor-bearing-stator simulations are evaluated through the use of various types of explicit/implicit numerical integration operators. Improving the overall numerical efficiency of the procedure is improved.

Development and Clinical Outcomes of a Dialectical Behavior Therapy Clinic

ERIC Educational Resources Information Center

Lajoie, Travis; Sonkiss, Joshua; Rich, Anne

2011-01-01

Objective: The authors describe the first 6 months of a dialectical behavior therapy (DBT) clinic operated by trainees in a general adult psychiatry residency program. The purpose of this report is to provide a model for the creation and maintenance of a formalized resident DBT clinic. Methods: Residents participated in the DBT clinic, attended a…

Self-Efficacy and the Stages and Processes of Change Associated with Adopting and Maintaining Muscular Fitness-Promoting Behaviors

ERIC Educational Resources Information Center

Cardinal, Bradley J.; Kosma, Maria

2004-01-01

The majority of physical activity initiatives have been directed toward promoting cardiorespiratory fitness and general health. Far less attention has been devoted to encouraging or understanding muscular fitness-promoting behaviors. The purpose of this study was to determine if constructs from the Transtheoretical Model, a contemporary behavior…

Open and Distance Education Accreditation Standards Scale: Validity and Reliability Studies

ERIC Educational Resources Information Center

Can, Ertug

2016-01-01

The purpose of this study is to develop, and test the validity and reliability of a scale for the use of researchers to determine the accreditation standards of open and distance education based on the views of administrators, teachers, staff and students. This research was designed according to the general descriptive survey model since it aims…

Marbles: A Means of Introducing Students to Scattering Concepts

ERIC Educational Resources Information Center

Bender, K. M.; Westphal, P. S.; Ramsier, R. D.

2008-01-01

The purpose of this activity is to introduce students to concepts of short-range and long-range scattering, and engage them in using indirect measurements and probabilistic models. The activity uses simple and readily available apparatus, and can be adapted for use with secondary level students as well as those in general physics courses or…

Trading off species protection and timber production in forests managed for multiple objectives

Treesearch

Vladimir Marianov; Stephanie Snyder; Charles ReVelle

2004-01-01

We address a multiobjective forest-management problem that maximizes harvested timber volume and maximizes the protection of species through the selection of protected habitat reserves. As opposed to reserving parcels of the forest for general habitat purposes, as most published works do, the model we present, and its several variants, concentrate on the preservation...

The Effect of Teacher Candidates' Critical Literacy Levels on Their Media Literacy Levels

ERIC Educational Resources Information Center

Semerci, Nuriye; Semerci, Çetin

2017-01-01

The purpose of this study is to determine the effect of teacher candidates' critical literacy levels on their media literacy levels. In the study, general survey model was used. The working group consists of 565 students studying at various departments of Bartin University, Faculty of Education. "Media Literacy Level Determination Scale"…

Experience in the Very Moment of Writing: Reconsidering Walter Benjamin's Theory of Mimesis

ERIC Educational Resources Information Center

Tsuji, Atsuko

2010-01-01

The purpose of this paper is to examine the ateleological moment of learning through imitation. In general, we can learn something new through imitating models we are given, which embody the values of our own society, culture and institutions. This means that imitation is understood in terms of the representation or reproduction of original…

Exposure to Mobbing: Perceptions of Primary School Teachers

ERIC Educational Resources Information Center

Çeliköz, Mine; Çeliköz, Nadir

2017-01-01

The general purpose of the present research is to examine teachers' perceptions of being exposed to Mobbing. The population of the research, in which the screening model is used, consists of teachers working in private and public elementary schools during the 2015-2016 school year. The study group is formed with 305 teachers who were voluntarily…

Assessing tree and stand biomass: a review with examples and critical comparisons

Treesearch

Bernard R. Parresol

1999-01-01

There is considerable interest today in estimating the biomass of trees and forests for both practical forestry issues and scientific purposes. New techniques and procedures are brought together along with the more traditional approaches to estimating woody biomass. General model forms and weighted analysis are reviewed, along with statistics for evaluating and...

Institutional Approach to Establishment of a Structural Model of the Russian Academic Environment Development

ERIC Educational Resources Information Center

Dudin, Mikhail N.; Ivashchenko, Natalia P.; Frolova, ?vgenia ?.; Abashidze, Aslan H.

2017-01-01

The purpose of the present article is to generalize and unify the approaches to improvement of the institutional environment that ensures optimal functioning and sustainable development of the Russian academic sphere. The following conclusions and results have been obtained through presentation of the materials in the article: (1) Improvement of…

National Research Council Dialogue to Assess Progress on NASA's Advanced Modeling, Simulation and Analysis Capability and Systems Engineering Capability Roadmap Development

NASA Technical Reports Server (NTRS)

Aikins, Jan

2005-01-01

Contents include the following: General Background and Introduction of Capability Roadmaps. Agency Objective. Strategic Planning Transformation. Advanced Planning Organizational Roles. Public Involvement in Strategic Planning. Strategic Roadmaps and Schedule. Capability Roadmaps and Schedule. Purpose of NRC Review. Capability Roadmap Development (Progress to Date).

Community College Finance: A Cost Analysis of Community College Expenditures Related to Maintenance and Operations

ERIC Educational Resources Information Center

Collins, Michael T.

2011-01-01

The purpose of this study is to develop a costing model for maintenance and operations expenditures among 16 single-campus California community college districts and assess the impact of a variety of variables including size of student enrollment, physical plant age, acreage, gross square footage, and general obligation facility bonds on district…

17 CFR 147.1 - General policy considerations, purpose and scope of rules relating to open Commission meetings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false General policy considerations, purpose and scope of rules relating to open Commission meetings. 147.1 Section 147.1 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OPEN COMMISSION MEETINGS § 147.1 General policy considerations, purpose and scope of rules...

Microfluidic System Simulation Including the Electro-Viscous Effect

NASA Technical Reports Server (NTRS)

Rojas, Eileen; Chen, C. P.; Majumdar, Alok

2007-01-01

This paper describes a practical approach using a general purpose lumped-parameter computer program, GFSSP (Generalized Fluid System Simulation Program) for calculating flow distribution in a network of micro-channels including electro-viscous effects due to the existence of electrical double layer (EDL). In this study, an empirical formulation for calculating an effective viscosity of ionic solutions based on dimensional analysis is described to account for surface charge and bulk fluid conductivity, which give rise to electro-viscous effect in microfluidics network. Two dimensional slit micro flow data was used to determine the model coefficients. Geometry effect is then included through a Poiseuille number correlation in GFSSP. The bi-power model was used to calculate flow distribution of isotropically etched straight channel and T-junction microflows involving ionic solutions. Performance of the proposed model is assessed against experimental test data.

The integrated manual and automatic control of complex flight systems

NASA Technical Reports Server (NTRS)

Schmidt, David K.

1991-01-01

Research dealt with the general area of optimal flight control synthesis for manned flight vehicles. The work was generic; no specific vehicle was the focus of study. However, the class of vehicles generally considered were those for which high authority, multivariable control systems might be considered, for the purpose of stabilization and the achievement of optimal handling characteristics. Within this scope, the topics of study included several optimal control synthesis techniques, control-theoretic modeling of the human operator in flight control tasks, and the development of possible handling qualities metrics and/or measures of merit. Basic contributions were made in all these topics, including human operator (pilot) models for multi-loop tasks, optimal output feedback flight control synthesis techniques; experimental validations of the methods developed, and fundamental modeling studies of the air-to-air tracking and flared landing tasks.

Integrating and Managing Bim in GIS, Software Review

NASA Astrophysics Data System (ADS)

El Meouche, R.; Rezoug, M.; Hijazi, I.

2013-08-01

Since the advent of Computer-Aided Design (CAD) and Geographical Information System (GIS) tools, project participants have been increasingly leveraging these tools throughout the different phases of a civil infrastructure project. In recent years the number of GIS software that provides tools to enable the integration of Building information in geo context has risen sharply. More and more GIS software are added tools for this purposes and other software projects are regularly extending these tools. However, each software has its different strength and weakness and its purpose of use. This paper provides a thorough review to investigate the software capabilities and clarify its purpose. For this study, Autodesk Revit 2012 i.e. BIM editor software was used to create BIMs. In the first step, three building models were created, the resulted models were converted to BIM format and then the software was used to integrate it. For the evaluation of the software, general characteristics was studied such as the user interface, what formats are supported (import/export), and the way building information are imported.

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

34 CFR 303.1 - Purpose of the early intervention program for infants and toddlers with disabilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Purpose of the early intervention program for infants... EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS WITH DISABILITIES General Purpose, Eligibility, and Other General Provisions § 303.1 Purpose of the early intervention program for infants and...

34 CFR 303.1 - Purpose of the early intervention program for infants and toddlers with disabilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true Purpose of the early intervention program for infants... EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS WITH DISABILITIES General Purpose, Eligibility, and Other General Provisions § 303.1 Purpose of the early intervention program for infants and...

A Framework for the Optimization of Discrete-Event Simulation Models

NASA Technical Reports Server (NTRS)

Joshi, B. D.; Unal, R.; White, N. H.; Morris, W. D.

1996-01-01

With the growing use of computer modeling and simulation, in all aspects of engineering, the scope of traditional optimization has to be extended to include simulation models. Some unique aspects have to be addressed while optimizing via stochastic simulation models. The optimization procedure has to explicitly account for the randomness inherent in the stochastic measures predicted by the model. This paper outlines a general purpose framework for optimization of terminating discrete-event simulation models. The methodology combines a chance constraint approach for problem formulation, together with standard statistical estimation and analyses techniques. The applicability of the optimization framework is illustrated by minimizing the operation and support resources of a launch vehicle, through a simulation model.

Self-learning Monte Carlo method and cumulative update in fermion systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Junwei; Shen, Huitao; Qi, Yang

2017-06-07

In this study, we develop the self-learning Monte Carlo (SLMC) method, a general-purpose numerical method recently introduced to simulate many-body systems, for studying interacting fermion systems. Our method uses a highly efficient update algorithm, which we design and dub “cumulative update”, to generate new candidate configurations in the Markov chain based on a self-learned bosonic effective model. From a general analysis and a numerical study of the double exchange model as an example, we find that the SLMC with cumulative update drastically reduces the computational cost of the simulation, while remaining statistically exact. Remarkably, its computational complexity is far lessmore » than the conventional algorithm with local updates.« less

STARS: An integrated general-purpose finite element structural, aeroelastic, and aeroservoelastic analysis computer program

NASA Technical Reports Server (NTRS)

Gupta, Kajal K.

1991-01-01

The details of an integrated general-purpose finite element structural analysis computer program which is also capable of solving complex multidisciplinary problems is presented. Thus, the SOLIDS module of the program possesses an extensive finite element library suitable for modeling most practical problems and is capable of solving statics, vibration, buckling, and dynamic response problems of complex structures, including spinning ones. The aerodynamic module, AERO, enables computation of unsteady aerodynamic forces for both subsonic and supersonic flow for subsequent flutter and divergence analysis of the structure. The associated aeroservoelastic analysis module, ASE, effects aero-structural-control stability analysis yielding frequency responses as well as damping characteristics of the structure. The program is written in standard FORTRAN to run on a wide variety of computers. Extensive graphics, preprocessing, and postprocessing routines are also available pertaining to a number of terminals.

A high-speed digital signal processor for atmospheric radar, part 7.3A

NASA Technical Reports Server (NTRS)

Brosnahan, J. W.; Woodard, D. M.

1984-01-01

The Model SP-320 device is a monolithic realization of a complex general purpose signal processor, incorporating such features as a 32-bit ALU, a 16-bit x 16-bit combinatorial multiplier, and a 16-bit barrel shifter. The SP-320 is designed to operate as a slave processor to a host general purpose computer in applications such as coherent integration of a radar return signal in multiple ranges, or dedicated FFT processing. Presently available is an I/O module conforming to the Intel Multichannel interface standard; other I/O modules will be designed to meet specific user requirements. The main processor board includes input and output FIFO (First In First Out) memories, both with depths of 4096 W, to permit asynchronous operation between the source of data and the host computer. This design permits burst data rates in excess of 5 MW/s.

Real-time traffic sign recognition based on a general purpose GPU and deep-learning

PubMed Central

Hong, Yongwon; Choi, Yeongwoo; Byun, Hyeran

2017-01-01

We present a General Purpose Graphics Processing Unit (GPGPU) based real-time traffic sign detection and recognition method that is robust against illumination changes. There have been many approaches to traffic sign recognition in various research fields; however, previous approaches faced several limitations when under low illumination or wide variance of light conditions. To overcome these drawbacks and improve processing speeds, we propose a method that 1) is robust against illumination changes, 2) uses GPGPU-based real-time traffic sign detection, and 3) performs region detecting and recognition using a hierarchical model. This method produces stable results in low illumination environments. Both detection and hierarchical recognition are performed in real-time, and the proposed method achieves 0.97 F1-score on our collective dataset, which uses the Vienna convention traffic rules (Germany and South Korea). PMID:28264011

GPACC program cost work breakdown structure-dictionary. General purpose aft cargo carrier study, volume 3

NASA Technical Reports Server (NTRS)

1985-01-01

The results of detailed cost estimates and economic analysis performed on the updated Model 101 configuration of the general purpose Aft Cargo Carrier (ACC) are given. The objective of this economic analysis is to provide the National Aeronautics and Space Administration (NASA) with information on the economics of using the ACC on the Space Transportation System (STS). The detailed cost estimates for the ACC are presented by a work breakdown structure (WBS) to ensure that all elements of cost are considered in the economic analysis and related subsystem trades. Costs reported by WBS provide NASA with a basis for comparing competing designs and provide detailed cost information that can be used to forecast phase C/D planning for new projects or programs derived from preliminary conceptual design studies. The scope covers all STS and STS/ACC launch vehicle cost impacts for delivering payloads to a 160 NM low Earth orbit (LEO).

Beyond the three-component model of organizational commitment.

PubMed

Solinger, Omar N; van Olffen, Woody; Roe, Robert A

2008-01-01

This article offers a conceptual critique of the three-component model (TCM) of organizational commitment (Allen & Meyer, 1990) and proposes a reconceptualization based on standard attitude theory. The authors use the attitude-behavior model by Eagly and Chaiken (1993) to demonstrate that the TCM combines fundamentally different attitudinal phenomena. They argue that general organizational commitment can best be understood as an attitude regarding the organization, while normative and continuance commitment are attitudes regarding specific forms of behavior (i.e., staying or leaving). The conceptual analysis shows that the TCM fails to qualify as general model of organizational commitment but instead represents a specific model for predicting turnover. The authors suggest that the use of the TCM be restricted to this purpose and that Eagly and Chaiken's model be adopted as a generic commitment model template from which a range of models for predicting specific organizational behaviors can be extracted. Finally, they discuss the definition and measurement of the organizational commitment attitude. Covering the affective, cognitive, and behavioral facets of this attitude helps to enhance construct validity and to differentiate the construct from other constructs. 2008 APA

12 CFR 223.16 - What transactions by a member bank with any person are treated as transactions with an affiliate?

Code of Federal Regulations, 2010 CFR

2010-01-01

... securities from or through an affiliate of the member bank. (4) General purpose credit card transactions. (i... imposed in, a general purpose credit card issued by the member bank to the nonaffiliate. (ii) Definition. “General purpose credit card” means a credit card issued by a member bank that is widely accepted by...

12 CFR 223.16 - What transactions by a member bank with any person are treated as transactions with an affiliate?

Code of Federal Regulations, 2012 CFR

2012-01-01

... securities from or through an affiliate of the member bank. (4) General purpose credit card transactions. (i... imposed in, a general purpose credit card issued by the member bank to the nonaffiliate. (ii) Definition. “General purpose credit card” means a credit card issued by a member bank that is widely accepted by...

12 CFR 223.16 - What transactions by a member bank with any person are treated as transactions with an affiliate?

Code of Federal Regulations, 2013 CFR

2013-01-01

... securities from or through an affiliate of the member bank. (4) General purpose credit card transactions. (i... imposed in, a general purpose credit card issued by the member bank to the nonaffiliate. (ii) Definition. “General purpose credit card” means a credit card issued by a member bank that is widely accepted by...

12 CFR 223.16 - What transactions by a member bank with any person are treated as transactions with an affiliate?

Code of Federal Regulations, 2011 CFR

2011-01-01

... securities from or through an affiliate of the member bank. (4) General purpose credit card transactions. (i... imposed in, a general purpose credit card issued by the member bank to the nonaffiliate. (ii) Definition. “General purpose credit card” means a credit card issued by a member bank that is widely accepted by...

12 CFR 223.16 - What transactions by a member bank with any person are treated as transactions with an affiliate?

Code of Federal Regulations, 2014 CFR

2014-01-01

... securities from or through an affiliate of the member bank. (4) General purpose credit card transactions. (i... imposed in, a general purpose credit card issued by the member bank to the nonaffiliate. (ii) Definition. “General purpose credit card” means a credit card issued by a member bank that is widely accepted by...

Issues in assessing multi-institutional performance of BI-RADS-based CAD systems

NASA Astrophysics Data System (ADS)

Markey, Mia K.; Lo, Joseph Y.

2005-04-01

The purpose of this study was to investigate factors that impact the generalization of breast cancer computer-aided diagnosis (CAD) systems that utilize the Breast Imaging Reporting and Data System (BI-RADS). Data sets from four institutions were analyzed: Duke University Medical Center, University of Pennsylvania Medical Center, Massachusetts General Hospital, and Wake Forest University. The latter two data sets are subsets of the Digital Database for Screening Mammography. Each data set consisted of descriptions of mammographic lesions according to the BI-RADS lexicon, patient age, and pathology status (benign/malignant). Models were developed to predict pathology status from the BI-RADS descriptors and the patient age. Comparisons between the models built on data from the different institutions were made in terms of empirical (non-parametric) receiver operating characteristic (ROC) curves. Results suggest that BI-RADS-based CAD systems focused on specific classes of lesions may be more generally applicable than models that cover several lesion types. However, better generalization was seen in terms of the area under the ROC curve than in the partial area index (>90% sensitivity). Previous studies have illustrated the challenges in translating a BI-RADS-based CAD system from one institution to another. This study provides new insights into possible approaches to improve the generalization of BI-RADS-based CAD systems.

Modeling Two-Phase Flow and Vapor Cycles Using the Generalized Fluid System Simulation Program

NASA Technical Reports Server (NTRS)

Smith, Amanda D.; Majumdar, Alok K.

2017-01-01

This work presents three new applications for the general purpose fluid network solver code GFSSP developed at NASA's Marshall Space Flight Center: (1) cooling tower, (2) vapor-compression refrigeration system, and (3) vapor-expansion power generation system. These systems are widely used across engineering disciplines in a variety of energy systems, and these models expand the capabilities and the use of GFSSP to include fluids and features that are not part of its present set of provided examples. GFSSP provides pressure, temperature, and species concentrations at designated locations, or nodes, within a fluid network based on a finite volume formulation of thermodynamics and conservation laws. This paper describes the theoretical basis for the construction of the models, their implementation in the current GFSSP modeling system, and a brief evaluation of the usefulness of the model results, as well as their applicability toward a broader spectrum of analytical problems in both university teaching and engineering research.

The ARC/INFO geographic information system

NASA Astrophysics Data System (ADS)

Morehouse, Scott

1992-05-01

ARC/INFO is a general-purpose system for processing geographic information. It is based on a relatively simple model of geographic space—the coverage—and contains an extensive set of geoprocessing tools which operate on coverages. ARC/INFO is used in a wide variety of applications areas, including: natural-resource inventory and planning, cadastral database development and mapping, urban and regional planning, and cartography. This paper is an overview of ARC/INFO and discusses the ARC/INFO conceptual architecture, data model, operators, and user interface.

CHARYBDIS: a black hole event generator

NASA Astrophysics Data System (ADS)

Harris, Christopher M.; Richardson, Peter; Webber, Bryan R.

2003-08-01

CHARYBDIS is an event generator which simulates the production and decay of miniature black holes at hadronic colliders as might be possible in certain extra dimension models. It interfaces via the Les Houches accord to general purpose Monte Carlo programs like HERWIG and PYTHIA which then perform the parton evolution and hadronization. The event generator includes the extra-dimensional `grey-body' effects as well as the change in the temperature of the black hole as the decay progresses. Various options for modelling the Planck-scale terminal decay are provided.

Using Advanced Analysis Approaches to Complete Long-Term Evaluations of Natural Attenuation Processes on the Remediation of Dissolved Chlorinated Solvent Contamination

DTIC Science & Technology

2008-10-01

and UTCHEM (Clement et al., 1998). While all four of these software packages use conservation of mass as the basic principle for tracking NAPL...simulate dissolution of a single NAPL component. UTCHEM can be used to simulate dissolution of a multiple NAPL components using either linear or first...parameters. No UTCHEM a/ 3D model, general purpose NAPL simulator. Yes Virulo a/ Probabilistic model for predicting leaching of viruses in unsaturated

Network simulation using the simulation language for alternate modeling (SLAM 2)

NASA Technical Reports Server (NTRS)

Shen, S.; Morris, D. W.

1983-01-01

The simulation language for alternate modeling (SLAM 2) is a general purpose language that combines network, discrete event, and continuous modeling capabilities in a single language system. The efficacy of the system's network modeling is examined and discussed. Examples are given of the symbolism that is used, and an example problem and model are derived. The results are discussed in terms of the ease of programming, special features, and system limitations. The system offers many features which allow rapid model development and provides an informative standardized output. The system also has limitations which may cause undetected errors and misleading reports unless the user is aware of these programming characteristics.

Grid sensitivity capability for large scale structures

NASA Technical Reports Server (NTRS)

Nagendra, Gopal K.; Wallerstein, David V.

1989-01-01

The considerations and the resultant approach used to implement design sensitivity capability for grids into a large scale, general purpose finite element system (MSC/NASTRAN) are presented. The design variables are grid perturbations with a rather general linking capability. Moreover, shape and sizing variables may be linked together. The design is general enough to facilitate geometric modeling techniques for generating design variable linking schemes in an easy and straightforward manner. Test cases have been run and validated by comparison with the overall finite difference method. The linking of a design sensitivity capability for shape variables in MSC/NASTRAN with an optimizer would give designers a powerful, automated tool to carry out practical optimization design of real life, complicated structures.

47 CFR 10.2 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Purpose. 10.2 Section 10.2 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM General Information § 10.2 Purpose. The rules in this part establish the requirements for participation in the voluntary Commercial...

33 CFR 101.100 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MARITIME SECURITY MARITIME SECURITY: GENERAL General § 101.100 Purpose. (a) The purpose of this subchapter is: (1) To implement portions of the maritime security regime required by the Maritime Transportation Security Act of 2002, as...

77 FR 77043 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... MK-84 2000 lb General Purpose Bombs; 1,725 MK-82 500 lb General Purpose Bombs; 1,725 BLU-109 Bombs; 3,450 GBU-39 Small Diameter Bombs; 11,500 FMU-139 Fuses; 11,500 FMU-143 Fuses; and 11,500 FMU-152 Fuses... and 1,725 KMU-572 (GBU-38) for MK-82 warheads); 3,450 MK-84 2000 lb General Purpose Bombs; 1,725 MK-82...

A Study on Design-Oriented Demands of VR via ZMET-QFD Model for Industrial Design Education and Students' Learning

ERIC Educational Resources Information Center

Liang, Yo-Wen; Lee, An-Sheng; Liu, Shuo-Fang

2016-01-01

The difficulty of Virtual Reality application in industrial design education and learning is VR engineers cannot comprehend what the important functions or elements are for students. In addition, a general-purpose VR usually confuses the students and provides neither good manipulation means nor useful toolkits. To solve these problems, the…

Using the Concrete-Representational-Abstract Sequence and the Strategic Instruction Model to Teach Computation to Students with Autism Spectrum Disorders and Developmental Disabilities

ERIC Educational Resources Information Center

Flores, Margaret M.; Hinton, Vanessa M.; Strozier, Shaunita D.

2014-01-01

There is a need for further investigation of evidence-based practices for students with autism spectrum disorders and developmental disabilities leading to students' success within the general education curriculum (Cihak & Foust, 2008; Rockwell, Griffin, & Jones, 2011; Schaefer-Whitby, Travers, & Harnik, 2009). The purpose of this…

Personality, Moral Purpose, and the Leadership of an Education for Sustainable Development

ERIC Educational Resources Information Center

Bottery, Mike; Wright, Nigel; James, Sarah

2012-01-01

This paper describes how two primary head teachers, nationally recognised as role models for the development of an education for sustainable development (ESD) in their schools, manage the implementation of this area. In doing so, it shows how they adopt two very different approaches to ESD and to their job generally, and suggests that whilst there…

Technologies and Reformed-Based Science Instruction: The Examination of a Professional Development Model Focused on Supporting Science Teaching and Learning with Technologies

ERIC Educational Resources Information Center

Campbell, Todd; Longhurst, Max L.; Wang, Shiang-Kwei; Hsu, Hui-Yin; Coster, Dan C.

2015-01-01

While access to computers, other technologies, and cyber-enabled resources that could be leveraged for enhancing student learning in science is increasing, generally it has been found that teachers use technology more for administrative purposes or to support traditional instruction. This use of technology, especially to support traditional…

A Comparison of Two Approaches for Measuring Educational Growth from CTBS and P-ACT+ Scores.

ERIC Educational Resources Information Center

Noble, Julie; Sawyer, Richard

The purpose of the study was to compare two regression-based approaches for measuring educational effectiveness in Tennessee high schools: the mean residual approach (MR), and a more general linear models (LM) approach. Data were obtained from a sample of 1,011 students who were enrolled in 48 high schools, and who had taken the Comprehensive…

Urban and Rural High School Students' Perspectives of Productive Peer Culture for Mathematics Learning

ERIC Educational Resources Information Center

Grant, Melva R.

2014-01-01

The purpose of this study was to determine students' perspectives about productive peer culture (PPC) in general and for mathematics learning. The urban and rural high school students in this study have participated for at least one year in either an Algebra Project Cohort Model (APCM) for daily mathematics instruction and/or worked as mathematics…

Using Testlet Response Theory to Examine Local Dependence in C-Tests

ERIC Educational Resources Information Center

Eckes, Thomas; Baghaei, Purya

2015-01-01

C-tests are gap-filling tests widely used to assess general language proficiency for purposes of placement, screening, or provision of feedback to language learners. C-tests consist of several short texts in which parts of words are missing. We addressed the issue of local dependence in C-tests using an explicit modeling approach based on testlet…

Application of physics engines in virtual worlds

NASA Astrophysics Data System (ADS)

Norman, Mark; Taylor, Tim

2002-03-01

Dynamic virtual worlds potentially can provide a much richer and more enjoyable experience than static ones. To realize such worlds, three approaches are commonly used. The first of these, and still widely applied, involves importing traditional animations from a modeling system such as 3D Studio Max. This approach is therefore limited to predefined animation scripts or combinations/blends thereof. The second approach involves the integration of some specific-purpose simulation code, such as car dynamics, and is thus generally limited to one (class of) application(s). The third approach involves the use of general-purpose physics engines, which promise to enable a range of compelling dynamic virtual worlds and to considerably speed up development. By far the largest market today for real-time simulation is computer games, revenues exceeding those of the movie industry. Traditionally, the simulation is produced by game developers in-house for specific titles. However, off-the-shelf middleware physics engines are now available for use in games and related domains. In this paper, we report on our experiences of using middleware physics engines to create a virtual world as an interactive experience, and an advanced scenario where artificial life techniques generate controllers for physically modeled characters.

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

7 CFR 254.1 - General purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION ADMINISTRATION OF THE FOOD DISTRIBUTION PROGRAM FOR INDIAN HOUSEHOLDS IN OKLAHOMA § 254.1 General purpose. This part sets the requirement under which...

7 CFR 254.1 - General purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION ADMINISTRATION OF THE FOOD DISTRIBUTION PROGRAM FOR INDIAN HOUSEHOLDS IN OKLAHOMA § 254.1 General purpose. This part sets the requirement under which...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

48 CFR 9905.502-60 - Illustrations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for the same purpose: (1) An educational institution normally allocates special test equipment costs directly to contracts. The costs of general purpose test equipment are normally included in the indirect... of general purpose test equipment costs from the indirect cost pool to the contract, in addition to...

44 CFR 10.1 - Background and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Background and purpose. 10.1 Section 10.1 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY GENERAL ENVIRONMENTAL CONSIDERATIONS General § 10.1 Background and purpose. (a) This part...

10 CFR 1016.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Purpose. 1016.1 Section 1016.1 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) SAFEGUARDING OF RESTRICTED DATA General Provisions § 1016.1 Purpose. The regulations in this part establish requirements for the safeguarding of Secret and Confidential Restricted Data...

Challenges in horizontal model integration.

PubMed

Kolczyk, Katrin; Conradi, Carsten

2016-03-11

Systems Biology has motivated dynamic models of important intracellular processes at the pathway level, for example, in signal transduction and cell cycle control. To answer important biomedical questions, however, one has to go beyond the study of isolated pathways towards the joint study of interacting signaling pathways or the joint study of signal transduction and cell cycle control. Thereby the reuse of established models is preferable, as it will generally reduce the modeling effort and increase the acceptance of the combined model in the field. Obtaining a combined model can be challenging, especially if the submodels are large and/or come from different working groups (as is generally the case, when models stored in established repositories are used). To support this task, we describe a semi-automatic workflow based on established software tools. In particular, two frequent challenges are described: identification of the overlap and subsequent (re)parameterization of the integrated model. The reparameterization step is crucial, if the goal is to obtain a model that can reproduce the data explained by the individual models. For demonstration purposes we apply our workflow to integrate two signaling pathways (EGF and NGF) from the BioModels Database.

Spatial modelling of disease using data- and knowledge-driven approaches.

PubMed

Stevens, Kim B; Pfeiffer, Dirk U

2011-09-01

The purpose of spatial modelling in animal and public health is three-fold: describing existing spatial patterns of risk, attempting to understand the biological mechanisms that lead to disease occurrence and predicting what will happen in the medium to long-term future (temporal prediction) or in different geographical areas (spatial prediction). Traditional methods for temporal and spatial predictions include general and generalized linear models (GLM), generalized additive models (GAM) and Bayesian estimation methods. However, such models require both disease presence and absence data which are not always easy to obtain. Novel spatial modelling methods such as maximum entropy (MAXENT) and the genetic algorithm for rule set production (GARP) require only disease presence data and have been used extensively in the fields of ecology and conservation, to model species distribution and habitat suitability. Other methods, such as multicriteria decision analysis (MCDA), use knowledge of the causal factors of disease occurrence to identify areas potentially suitable for disease. In addition to their less restrictive data requirements, some of these novel methods have been shown to outperform traditional statistical methods in predictive ability (Elith et al., 2006). This review paper provides details of some of these novel methods for mapping disease distribution, highlights their advantages and limitations, and identifies studies which have used the methods to model various aspects of disease distribution. Copyright © 2011. Published by Elsevier Ltd.

Solar astrophysics - Ghettosis from, or symbiosis with, stellar and galactic astrophysics

NASA Technical Reports Server (NTRS)

Pecker, J.-C.; Thomas, R. N.

1976-01-01

The purpose of the paper is to show how the solar-stellar symbiotic approach has led to the modeling of a star as a concentration of matter and energy. By 'solar-stellar symbiosis' is meant the philosophy of investigation according to which one asks what change in our general understanding of stellar structure and of stellar spectroscopic diagnostics is required to satisfy both the sun and an unusual star when, for example, some feature of an unusual star is discovered. The evolution of stellar models is traced, from walled, thermodynamic-equilibrium models to de-isolated models featuring transition zones and nonlocal thermodynamic equilibrium.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Platania, P., E-mail: platania@ifp.cnr.it; Figini, L.; Farina, D.

The purpose of this work is the optical modeling and physical performances evaluations of the JT-60SA ECRF launcher system. The beams have been simulated with the electromagnetic code GRASP® and used as input for ECCD calculations performed with the beam tracing code GRAY, capable of modeling propagation, absorption and current drive of an EC Gaussion beam with general astigmatism. Full details of the optical analysis has been taken into account to model the launched beams. Inductive and advanced reference scenarios has been analysed for physical evaluations in the full poloidal and toroidal steering ranges for two slightly different layouts ofmore » the launcher system.« less

Generalized information fusion and visualization using spatial voting and data modeling

NASA Astrophysics Data System (ADS)

Jaenisch, Holger M.; Handley, James W.

2013-05-01

We present a novel and innovative information fusion and visualization framework for multi-source intelligence (multiINT) data using Spatial Voting (SV) and Data Modeling. We describe how different sources of information can be converted into numerical form for further processing downstream, followed by a short description of how this information can be fused using the SV grid. As an illustrative example, we show the modeling of cyberspace as cyber layers for the purpose of tracking cyber personas. Finally we describe a path ahead for creating interactive agile networks through defender customized Cyber-cubes for network configuration and attack visualization.

Investigating the relationship between run-off-the-road crash frequency and traffic flow through different functional forms.

PubMed

Roque, Carlos; Cardoso, João Lourenço

2014-02-01

Crash prediction models play a major role in highway safety analysis. These models can be used for various purposes, such as predicting the number of road crashes or establishing relationships between these crashes and different covariates. However, the appropriate choice for the functional form of these models is generally not discussed in research literature on road safety. In case of run-off-the-road crashes, empirical evidence and logical considerations lead to conclusion that the relationship between expected frequency and traffic flow is not monotonously increasing. Copyright © 2013 Elsevier Ltd. All rights reserved.

Binaural signal detection - Equalization and cancellation theory.

NASA Technical Reports Server (NTRS)

Durlach, N. I.

1972-01-01

The improvement in masked-signal detection afforded by two ears (i.e., binaural unmasking) is explained on the basis of a descriptive model of the processing of binaural stimuli by a system consisting of two bandpass filters, an equalization and cancellation mechanism, and a decision device. The main ideas of the model are initially explained, and a general equation is derived for the purpose of making quantitative predictions. Comparisons are then made between various special cases of this equation and experimental data. Failures of the preliminary model in predicting the data are considered, and possible revisions are discussed.

Empirical comparison study of approximate methods for structure selection in binary graphical models.

PubMed

Viallon, Vivian; Banerjee, Onureena; Jougla, Eric; Rey, Grégoire; Coste, Joel

2014-03-01

Looking for associations among multiple variables is a topical issue in statistics due to the increasing amount of data encountered in biology, medicine, and many other domains involving statistical applications. Graphical models have recently gained popularity for this purpose in the statistical literature. In the binary case, however, exact inference is generally very slow or even intractable because of the form of the so-called log-partition function. In this paper, we review various approximate methods for structure selection in binary graphical models that have recently been proposed in the literature and compare them through an extensive simulation study. We also propose a modification of one existing method, that is shown to achieve good performance and to be generally very fast. We conclude with an application in which we search for associations among causes of death recorded on French death certificates. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Fuzzy branching temporal logic.

PubMed

Moon, Seong-ick; Lee, Kwang H; Lee, Doheon

2004-04-01

Intelligent systems require a systematic way to represent and handle temporal information containing uncertainty. In particular, a logical framework is needed that can represent uncertain temporal information and its relationships with logical formulae. Fuzzy linear temporal logic (FLTL), a generalization of propositional linear temporal logic (PLTL) with fuzzy temporal events and fuzzy temporal states defined on a linear time model, was previously proposed for this purpose. However, many systems are best represented by branching time models in which each state can have more than one possible future path. In this paper, fuzzy branching temporal logic (FBTL) is proposed to address this problem. FBTL adopts and generalizes concurrent tree logic (CTL*), which is a classical branching temporal logic. The temporal model of FBTL is capable of representing fuzzy temporal events and fuzzy temporal states, and the order relation among them is represented as a directed graph. The utility of FBTL is demonstrated using a fuzzy job shop scheduling problem as an example.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayes, W. B.

The general purpose of this project was to provide information that might be of use to biologists who are investigating the effects of effluents on plankton. Although most applicable to non-persistent pollutants, such as thermal effluents, the methodology may be applied in some degree to nondegradable pollutants as well. The purpose of the present study was, therefore, to provide some information about the relative effectiveness of certain representative affinity tests, in circumstances that would be analogous to those encountered in an impact investigation on plankton. In such a study, real data cannot be used, if the purpose is to showmore » the efficiency of a test at detecting groups with known characteristics; artificial data must be employed in which those characteristics are built in. For that reason, a distribution model was to generate the data for computer analysis.« less

Model averaging techniques for quantifying conceptual model uncertainty.

PubMed

Singh, Abhishek; Mishra, Srikanta; Ruskauff, Greg

2010-01-01

In recent years a growing understanding has emerged regarding the need to expand the modeling paradigm to include conceptual model uncertainty for groundwater models. Conceptual model uncertainty is typically addressed by formulating alternative model conceptualizations and assessing their relative likelihoods using statistical model averaging approaches. Several model averaging techniques and likelihood measures have been proposed in the recent literature for this purpose with two broad categories--Monte Carlo-based techniques such as Generalized Likelihood Uncertainty Estimation or GLUE (Beven and Binley 1992) and criterion-based techniques that use metrics such as the Bayesian and Kashyap Information Criteria (e.g., the Maximum Likelihood Bayesian Model Averaging or MLBMA approach proposed by Neuman 2003) and Akaike Information Criterion-based model averaging (AICMA) (Poeter and Anderson 2005). These different techniques can often lead to significantly different relative model weights and ranks because of differences in the underlying statistical assumptions about the nature of model uncertainty. This paper provides a comparative assessment of the four model averaging techniques (GLUE, MLBMA with KIC, MLBMA with BIC, and AIC-based model averaging) mentioned above for the purpose of quantifying the impacts of model uncertainty on groundwater model predictions. Pros and cons of each model averaging technique are examined from a practitioner's perspective using two groundwater modeling case studies. Recommendations are provided regarding the use of these techniques in groundwater modeling practice.

15 CFR 971.100 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS General § 971.100 Purpose. The...

15 CFR 971.100 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS General § 971.100 Purpose. The...

15 CFR 971.100 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS General § 971.100 Purpose. The...

15 CFR 971.100 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS General § 971.100 Purpose. The...

15 CFR 971.100 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS General § 971.100 Purpose. The...

47 CFR 4.1 - Scope, basis and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Scope, basis and purpose. 4.1 Section 4.1 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL DISRUPTIONS TO COMMUNICATIONS General § 4.1 Scope, basis and purpose. In this part, the Federal Communications Commission is setting forth requirements...

47 CFR 4.1 - Scope, basis and purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Scope, basis and purpose. 4.1 Section 4.1 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL DISRUPTIONS TO COMMUNICATIONS General § 4.1 Scope, basis and purpose. In this part, the Federal Communications Commission is setting forth requirements...

42 CFR 456.241 - Purpose and general description.

Code of Federal Regulations, 2011 CFR

2011-10-01

... health care. (b) Medical care evaluation studies— (1) Emphasize identification and analysis of patterns... Ur Plan: Medical Care Evaluation Studies § 456.241 Purpose and general description. (a) The purpose of medical care evaluation studies is to promote the most effective and efficient use of available...

42 CFR 456.241 - Purpose and general description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... health care. (b) Medical care evaluation studies— (1) Emphasize identification and analysis of patterns... Ur Plan: Medical Care Evaluation Studies § 456.241 Purpose and general description. (a) The purpose of medical care evaluation studies is to promote the most effective and efficient use of available...

A hierarchical model of the evolution of human brain specializations

PubMed Central

Barrett, H. Clark

2012-01-01

The study of information-processing adaptations in the brain is controversial, in part because of disputes about the form such adaptations might take. Many psychologists assume that adaptations come in two kinds, specialized and general-purpose. Specialized mechanisms are typically thought of as innate, domain-specific, and isolated from other brain systems, whereas generalized mechanisms are developmentally plastic, domain-general, and interactive. However, if brain mechanisms evolve through processes of descent with modification, they are likely to be heterogeneous, rather than coming in just two kinds. They are likely to be hierarchically organized, with some design features widely shared across brain systems and others specific to particular processes. Also, they are likely to be largely developmentally plastic and interactive with other brain systems, rather than canalized and isolated. This article presents a hierarchical model of brain specialization, reviewing evidence for the model from evolutionary developmental biology, genetics, brain mapping, and comparative studies. Implications for the search for uniquely human traits are discussed, along with ways in which conventional views of modularity in psychology may need to be revised. PMID:22723350

Generalized Fluid System Simulation Program, Version 5.0-Educational. Supplemental Information for NASA/TM-2011-216470. Supplement

NASA Technical Reports Server (NTRS)

Majumdar, A. K.

2011-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependent flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors and external body forces such as gravity and centrifugal. The thermofluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the point, drag and click method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids and 21 different resistance/source options are provided for modeling momentum sources or sinks in the branches. This Technical Memorandum illustrates the application and verification of the code through 12 demonstrated example problems. This supplement gives the input and output data files for the examples.

Dark-energy cosmological models in f(G) gravity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shamir, M. F., E-mail: farasat.shamir@nu.edu.pk

We discuss dark-energy cosmological models in f(G) gravity. For this purpose, a locally rotationally symmetric Bianchi type I cosmological model is considered. First, exact solutions with a well-known form of the f(G) model are explored. One general solution is discussed using a power-law f(G) gravity model and physical quantities are calculated. In particular, Kasner’s universe is recovered and the corresponding f(G) gravity models are reported. Second, the energy conditions for the model under consideration are discussed using graphical analysis. It is concluded that solutions with f(G) = G{sup 5/6} support expansion of universe while those with f(G) = G{sup 1/2}more » do not favor the current expansion.« less

Quantum Chemical Modeling of Enzymatic Reactions: The Case of Decarboxylation.

PubMed

Liao, Rong-Zhen; Yu, Jian-Guo; Himo, Fahmi

2011-05-10

We present a systematic study of the decarboxylation step of the enzyme aspartate decarboxylase with the purpose of assessing the quantum chemical cluster approach for modeling this important class of decarboxylase enzymes. Active site models ranging in size from 27 to 220 atoms are designed, and the barrier and reaction energy of this step are evaluated. To model the enzyme surrounding, homogeneous polarizable medium techniques are used with several dielectric constants. The main conclusion is that when the active site model reaches a certain size, the solvation effects from the surroundings saturate. Similar results have previously been obtained from systematic studies of other classes of enzymes, suggesting that they are of a quite general nature.

Modeling the missile-launch tube problem in DYSCO

NASA Technical Reports Server (NTRS)

Berman, Alex; Gustavson, Bruce A.

1989-01-01

DYSCO is a versatile, general purpose dynamic analysis program which assembles equations and solves dynamics problems. The executive manages a library of technology modules which contain routines that compute the matrix coefficients of the second order ordinary differential equations of the components. The executive performs the coupling of the equations of the components and manages the solution of the coupled equations. Any new component representation may be added to the library if, given the state vector, a FORTRAN program can be written to compute M, C, K, and F. The problem described demonstrates the generality of this statement.

Finite element for rotor/stator interactive forces in general engine dynamic simulation. Part 1: Development of bearing damper element

NASA Technical Reports Server (NTRS)

Adams, M. L.; Padovan, J.; Fertis, D. G.

1980-01-01

A general purpose squeeze-film damper interactive force element was developed, coded into a software package (module) and debugged. This software package was applied to nonliner dynamic analyses of some simple rotor systems. Results for pressure distributions show that the long bearing (end sealed) is a stronger bearing as compared to the short bearing as expected. Results of the nonlinear dynamic analysis, using a four degree of freedom simulation model, showed that the orbit of the rotating shaft increases nonlinearity to fill the bearing clearance as the unbalanced weight increases.

Microengineering in cardiovascular research: new developments and translational applications.

PubMed

Chan, Juliana M; Wong, Keith H K; Richards, Arthur Mark; Drum, Chester L

2015-04-01

Microfluidic, cellular co-cultures that approximate macro-scale biology are important tools for refining the in vitro study of organ-level function and disease. In recent years, advances in technical fabrication and biological integration have provided new insights into biological phenomena, improved diagnostic measurements, and made major steps towards de novo tissue creation. Here we review applications of these technologies specific to the cardiovascular field, emphasizing three general categories of use: reductionist vascular models, tissue-engineered vascular models, and point-of-care diagnostics. With continued progress in the ability to purposefully control microscale environments, the detailed study of both primary and cultured cells may find new relevance in the general cardiovascular research community. © The Author 2015. Published by Oxford University Press on behalf of the European Society of Cardiology.

Development of Integrated Programs for Aerospace-vehicle design (IPAD): Integrated information processing requirements

NASA Technical Reports Server (NTRS)

Southall, J. W.

1979-01-01

The engineering-specified requirements for integrated information processing by means of the Integrated Programs for Aerospace-Vehicle Design (IPAD) system are presented. A data model is described and is based on the design process of a typical aerospace vehicle. General data management requirements are specified for data storage, retrieval, generation, communication, and maintenance. Information management requirements are specified for a two-component data model. In the general portion, data sets are managed as entities, and in the specific portion, data elements and the relationships between elements are managed by the system, allowing user access to individual elements for the purpose of query. Computer program management requirements are specified for support of a computer program library, control of computer programs, and installation of computer programs into IPAD.

PEITH(Θ): perfecting experiments with information theory in Python with GPU support.

PubMed

Dony, Leander; Mackerodt, Jonas; Ward, Scott; Filippi, Sarah; Stumpf, Michael P H; Liepe, Juliane

2018-04-01

Different experiments provide differing levels of information about a biological system. This makes it difficult, a priori, to select one of them beyond mere speculation and/or belief, especially when resources are limited. With the increasing diversity of experimental approaches and general advances in quantitative systems biology, methods that inform us about the information content that a given experiment carries about the question we want to answer, become crucial. PEITH(Θ) is a general purpose, Python framework for experimental design in systems biology. PEITH(Θ) uses Bayesian inference and information theory in order to derive which experiments are most informative in order to estimate all model parameters and/or perform model predictions. https://github.com/MichaelPHStumpf/Peitho. m.stumpf@imperial.ac.uk or juliane.liepe@mpibpc.mpg.de.

Using a generalized linear mixed model approach to explore the role of age, motor proficiency, and cognitive styles in children's reach estimation accuracy.

PubMed

Caçola, Priscila M; Pant, Mohan D

2014-10-01

The purpose was to use a multi-level statistical technique to analyze how children's age, motor proficiency, and cognitive styles interact to affect accuracy on reach estimation tasks via Motor Imagery and Visual Imagery. Results from the Generalized Linear Mixed Model analysis (GLMM) indicated that only the 7-year-old age group had significant random intercepts for both tasks. Motor proficiency predicted accuracy in reach tasks, and cognitive styles (object scale) predicted accuracy in the motor imagery task. GLMM analysis is suitable to explore age and other parameters of development. In this case, it allowed an assessment of motor proficiency interacting with age to shape how children represent, plan, and act on the environment.

1 CFR 455.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Purpose and scope. 455.1 Section 455.1 General Provisions MISCELLANEOUS AGENCIES NATIONAL CAPITAL PLANNING COMMISSION (PRIVACY ACT REGULATIONS) § 455.1 Purpose and scope. These procedures provide the means by which individuals may safeguard their privacy by...

44 CFR 1.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Purpose. 1.1 Section 1.1... GENERAL RULEMAKING; POLICY AND PROCEDURES General § 1.1 Purpose. (a) This part contains the basic policies... procedures for implementation of the Regulatory Flexibility Act which took effect January 1, 1981. (d) A FEMA...

1 CFR 455.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Purpose and scope. 455.1 Section 455.1 General Provisions MISCELLANEOUS AGENCIES NATIONAL CAPITAL PLANNING COMMISSION (PRIVACY ACT REGULATIONS) § 455.1 Purpose and scope. These procedures provide the means by which individuals may safeguard their privacy by...

1 CFR 425.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Purpose and scope. 425.1 Section 425.1 General Provisions MISCELLANEOUS AGENCIES PRESIDENT'S COMMISSION ON WHITE HOUSE FELLOWSHIPS § 425.1 Purpose and scope. This part sets forth the President's Commission on White House Fellowships procedures under the Privacy...

1 CFR 425.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Purpose and scope. 425.1 Section 425.1 General Provisions MISCELLANEOUS AGENCIES PRESIDENT'S COMMISSION ON WHITE HOUSE FELLOWSHIPS § 425.1 Purpose and scope. This part sets forth the President's Commission on White House Fellowships procedures under the Privacy...

47 CFR 13.1 - Basis and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL RADIO OPERATORS General § 13.1 Basis and purpose. (a) Basis. The basis for the rules contained in this part is the Communications Act of 1934, as... purpose of the rules in this part is to prescribe the manner and conditions under which commercial radio...

10 CFR 1009.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Purpose and scope. 1009.1 Section 1009.1 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) GENERAL POLICY FOR PRICING AND CHARGING FOR MATERIALS AND SERVICES SOLD BY DOE § 1009.1 Purpose and scope. (a) This part establishes Department of Energy policy for...

42 CFR 1002.1 - Scope and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Scope and purpose. 1002.1 Section 1002.1 Public Health OFFICE OF INSPECTOR GENERAL-HEALTH CARE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OIG AUTHORITIES PROGRAM INTEGRITY-STATE-INITIATED EXCLUSIONS FROM MEDICAID General Provisions § 1002.1 Scope and purpose...

21 CFR 864.4010 - General purpose reagent.

Code of Federal Regulations, 2010 CFR

2010-04-01

... is used to collect, prepare, and examine specimens from the human body for diagnostic purposes, and... 21 Food and Drugs 8 2010-04-01 2010-04-01 false General purpose reagent. 864.4010 Section 864.4010 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED...

21 CFR 864.4010 - General purpose reagent.

Code of Federal Regulations, 2011 CFR

2011-04-01

... is used to collect, prepare, and examine specimens from the human body for diagnostic purposes, and... 21 Food and Drugs 8 2011-04-01 2011-04-01 false General purpose reagent. 864.4010 Section 864.4010 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED...

43 CFR 3730.0-1 - Purpose; lands open.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Purpose; lands open. 3730.0-1 Section 3730.0-1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND... WITHDRAWALS: GENERAL Public Law 359; Mining in Powersite Withdrawals: General § 3730.0-1 Purpose; lands open...

43 CFR 3730.0-1 - Purpose; lands open.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Purpose; lands open. 3730.0-1 Section 3730.0-1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND... WITHDRAWALS: GENERAL Public Law 359; Mining in Powersite Withdrawals: General § 3730.0-1 Purpose; lands open...

43 CFR 3730.0-1 - Purpose; lands open.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Purpose; lands open. 3730.0-1 Section 3730.0-1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND... WITHDRAWALS: GENERAL Public Law 359; Mining in Powersite Withdrawals: General § 3730.0-1 Purpose; lands open...

43 CFR 3730.0-1 - Purpose; lands open.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Purpose; lands open. 3730.0-1 Section 3730.0-1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND... WITHDRAWALS: GENERAL Public Law 359; Mining in Powersite Withdrawals: General § 3730.0-1 Purpose; lands open...

45 CFR 12.9 - General disposal terms and conditions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... UTILIZATION OF SURPLUS REAL PROPERTY FOR PUBLIC HEALTH PURPOSES § 12.9 General disposal terms and conditions. (a) Surplus real property transfers under this part will be limited to public health purposes... hereof. (b) A transfer of surplus real property for public health purposes is subject to the disapproval...

45 CFR 12.9 - General disposal terms and conditions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... UTILIZATION OF SURPLUS REAL PROPERTY FOR PUBLIC HEALTH PURPOSES § 12.9 General disposal terms and conditions. (a) Surplus real property transfers under this part will be limited to public health purposes... hereof. (b) A transfer of surplus real property for public health purposes is subject to the disapproval...

45 CFR 12.9 - General disposal terms and conditions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... UTILIZATION OF SURPLUS REAL PROPERTY FOR PUBLIC HEALTH PURPOSES § 12.9 General disposal terms and conditions. (a) Surplus real property transfers under this part will be limited to public health purposes... hereof. (b) A transfer of surplus real property for public health purposes is subject to the disapproval...

47 CFR 13.1 - Basis and purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Basis and purpose. 13.1 Section 13.1 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL RADIO OPERATORS General § 13.1 Basis and purpose. (a) Basis. The basis for the rules contained in this part is the Communications Act of 1934, as...

34 CFR 668.161 - Scope and purpose (cash management rules).

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 3 2012-07-01 2012-07-01 false Scope and purpose (cash management rules). 668.161... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STUDENT ASSISTANCE GENERAL PROVISIONS Cash Management § 668.161 Scope and purpose (cash management rules). (a) General. (1) This subpart establishes the rules and...

34 CFR 668.161 - Scope and purpose (cash management rules).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false Scope and purpose (cash management rules). 668.161... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STUDENT ASSISTANCE GENERAL PROVISIONS Cash Management § 668.161 Scope and purpose (cash management rules). (a) General. (1) This subpart establishes the rules and...

34 CFR 668.161 - Scope and purpose (cash management rules).

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 3 2013-07-01 2013-07-01 false Scope and purpose (cash management rules). 668.161... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STUDENT ASSISTANCE GENERAL PROVISIONS Cash Management § 668.161 Scope and purpose (cash management rules). (a) General. (1) This subpart establishes the rules and...

34 CFR 668.161 - Scope and purpose (cash management rules).

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 3 2014-07-01 2014-07-01 false Scope and purpose (cash management rules). 668.161... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STUDENT ASSISTANCE GENERAL PROVISIONS Cash Management § 668.161 Scope and purpose (cash management rules). (a) General. (1) This subpart establishes the rules and...

34 CFR 668.161 - Scope and purpose (cash management rules).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Scope and purpose (cash management rules). 668.161... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION STUDENT ASSISTANCE GENERAL PROVISIONS Cash Management § 668.161 Scope and purpose (cash management rules). (a) General. (1) This subpart establishes the rules and...

18 CFR 3a.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Purpose. 3a.1 Section 3a.1 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION General § 3a.1 Purpose. This part 3a describes the...

18 CFR 3a.1 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Purpose. 3a.1 Section 3a.1 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION General § 3a.1 Purpose. This part 3a describes the...

18 CFR 3a.1 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Purpose. 3a.1 Section 3a.1 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION General § 3a.1 Purpose. This part 3a describes the...

18 CFR 3a.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Purpose. 3a.1 Section 3a.1 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION General § 3a.1 Purpose. This part 3a describes the...

42 CFR 456.141 - Purpose and general description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... care evaluation studies— (1) Emphasize identification and analysis of patterns of patient care; and (2...: Medical Care Evaluation Studies § 456.141 Purpose and general description. (a) The purpose of medical care evaluation studies is to promote the most effective and efficient use of available health facilities and...

42 CFR 456.141 - Purpose and general description.

Code of Federal Regulations, 2011 CFR

2011-10-01

... care evaluation studies— (1) Emphasize identification and analysis of patterns of patient care; and (2...: Medical Care Evaluation Studies § 456.141 Purpose and general description. (a) The purpose of medical care evaluation studies is to promote the most effective and efficient use of available health facilities and...

1 CFR 455.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Purpose and scope. 455.1 Section 455.1 General Provisions MISCELLANEOUS AGENCIES NATIONAL CAPITAL PLANNING COMMISSION (PRIVACY ACT REGULATIONS) § 455.1 Purpose and scope. These procedures provide the means by which individuals may safeguard their privacy by...

44 CFR 1.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 44 Emergency Management and Assistance 1 2014-10-01 2014-10-01 false Purpose. 1.1 Section 1.1... GENERAL RULEMAKING; POLICY AND PROCEDURES General § 1.1 Purpose. (a) This part contains the basic policies... procedures for implementation of the Regulatory Flexibility Act which took effect January 1, 1981. (d) A FEMA...

1 CFR 455.1 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Purpose and scope. 455.1 Section 455.1 General Provisions MISCELLANEOUS AGENCIES NATIONAL CAPITAL PLANNING COMMISSION (PRIVACY ACT REGULATIONS) § 455.1 Purpose and scope. These procedures provide the means by which individuals may safeguard their privacy by...

1 CFR 455.1 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Purpose and scope. 455.1 Section 455.1 General Provisions MISCELLANEOUS AGENCIES NATIONAL CAPITAL PLANNING COMMISSION (PRIVACY ACT REGULATIONS) § 455.1 Purpose and scope. These procedures provide the means by which individuals may safeguard their privacy by...

44 CFR 1.1 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 44 Emergency Management and Assistance 1 2012-10-01 2011-10-01 true Purpose. 1.1 Section 1.1... GENERAL RULEMAKING; POLICY AND PROCEDURES General § 1.1 Purpose. (a) This part contains the basic policies... procedures for implementation of the Regulatory Flexibility Act which took effect January 1, 1981. (d) A FEMA...

44 CFR 1.1 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 44 Emergency Management and Assistance 1 2013-10-01 2013-10-01 false Purpose. 1.1 Section 1.1... GENERAL RULEMAKING; POLICY AND PROCEDURES General § 1.1 Purpose. (a) This part contains the basic policies... procedures for implementation of the Regulatory Flexibility Act which took effect January 1, 1981. (d) A FEMA...

33 CFR 142.81 - Purpose and applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) OUTER CONTINENTAL SHELF ACTIVITIES WORKPLACE SAFETY AND HEALTH General Workplace Conditions § 142.81 Purpose and applicability. This subpart prescribes requirements relating to general working conditions on...

Instrument Systems Analysis and Verification Facility (ISAVF) users guide

NASA Technical Reports Server (NTRS)

Davis, J. F.; Thomason, J. O.; Wolfgang, J. L.

1985-01-01

The ISAVF facility is primarily an interconnected system of computers, special purpose real time hardware, and associated generalized software systems, which will permit the Instrument System Analysts, Design Engineers and Instrument Scientists, to perform trade off studies, specification development, instrument modeling, and verification of the instrument, hardware performance. It is not the intent of the ISAVF to duplicate or replace existing special purpose facilities such as the Code 710 Optical Laboratories or the Code 750 Test and Evaluation facilities. The ISAVF will provide data acquisition and control services for these facilities, as needed, using remote computer stations attached to the main ISAVF computers via dedicated communication lines.

The rational choice model in family decision making at the end of life.

PubMed

Karasz, Alison; Sacajiu, Galit; Kogan, Misha; Watkins, Liza

2010-01-01

Most end-of-life decisions are made by family members. Current ethical guidelines for family decision making are based on a hierarchical model that emphasizes the patient's wishes over his or her best interests. Evidence suggests that the model poorly reflects the strategies and priorities of many families. Researchers observed and recorded 26 decision-making meetings between hospital staff and family members. Semi-structured follow-up interviews were conducted. Transcriptions were analyzed using qualitative techniques. For both staff and families, consideration of a patient's best interests generally took priority over the patient's wishes. Staff generally introduced discussion of the patient's wishes for rhetorical purposes, such as persuasion. Competing moral frameworks, which de-emphasized the salience of patients' autonomy and "right to choose," played a role in family decision making. The priority given to the patients' wishes in the hierarchical model does not reflect the priorities of staff and families in making decisions about end-of-life care.

The Cyber Aggression in Relationships Scale: A New Multidimensional Measure of Technology-Based Intimate Partner Aggression.

PubMed

Watkins, Laura E; Maldonado, Rosalita C; DiLillo, David

2018-07-01

The purpose of this study was to develop and provide initial validation for a measure of adult cyber intimate partner aggression (IPA): the Cyber Aggression in Relationships Scale (CARS). Drawing on recent conceptual models of cyber IPA, items from previous research exploring general cyber aggression and cyber IPA were modified and new items were generated for inclusion in the CARS. Two samples of adults 18 years or older were recruited online. We used item factor analysis to test the factor structure, model fit, and invariance of the measure structure across women and men. Results confirmed that three-factor models for both perpetration and victimization demonstrated good model fit, and that, in general, the CARS measures partner cyber aggression similarly for women and men. The CARS also demonstrated validity through significant associations with in-person IPA, trait anger, and jealousy. Findings suggest the CARS is a useful tool for assessing cyber IPA in both research and clinical settings.

Scaling local species-habitat relations to the larger landscape with a hierarchical spatial count model

USGS Publications Warehouse

Thogmartin, W.E.; Knutson, M.G.

2007-01-01

Much of what is known about avian species-habitat relations has been derived from studies of birds at local scales. It is entirely unclear whether the relations observed at these scales translate to the larger landscape in a predictable linear fashion. We derived habitat models and mapped predicted abundances for three forest bird species of eastern North America using bird counts, environmental variables, and hierarchical models applied at three spatial scales. Our purpose was to understand habitat associations at multiple spatial scales and create predictive abundance maps for purposes of conservation planning at a landscape scale given the constraint that the variables used in this exercise were derived from local-level studies. Our models indicated a substantial influence of landscape context for all species, many of which were counter to reported associations at finer spatial extents. We found land cover composition provided the greatest contribution to the relative explained variance in counts for all three species; spatial structure was second in importance. No single spatial scale dominated any model, indicating that these species are responding to factors at multiple spatial scales. For purposes of conservation planning, areas of predicted high abundance should be investigated to evaluate the conservation potential of the landscape in their general vicinity. In addition, the models and spatial patterns of abundance among species suggest locations where conservation actions may benefit more than one species. ?? 2006 Springer Science+Business Media B.V.

Methods for Trustworthy Design of On-Chip Bus Interconnect for General-Purpose Processors

DTIC Science & Technology

2012-03-01

Technology Andrew Huang, was able to test the security properties of HyperTransport bus protocol on an Xbox [20]. In his research, he was able to...TRUSTWORTHY DESIGN OF ON -CHIP BUS INTERCONNECT FOR GENERAL-PURPOSE PROCESSORS by Jay F. Elson March 2012 Thesis Advisor: Ted Huffmire Second...AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE Methods for Trustworthy Design of On -Chip Bus Interconnect for General-Purpose Processors 5

Numerical Analysis of 2-D and 3-D MHD Flows Relevant to Fusion Applications

DOE PAGES

Khodak, Andrei

2017-08-21

Here, the analysis of many fusion applications such as liquid-metal blankets requires application of computational fluid dynamics (CFD) methods for electrically conductive liquids in geometrically complex regions and in the presence of a strong magnetic field. A current state of the art general purpose CFD code allows modeling of the flow in complex geometric regions, with simultaneous conjugated heat transfer analysis in liquid and surrounding solid parts. Together with a magnetohydrodynamics (MHD) capability, the general purpose CFD code will be a valuable tool for the design and optimization of fusion devices. This paper describes an introduction of MHD capability intomore » the general purpose CFD code CFX, part of the ANSYS Workbench. The code was adapted for MHD problems using a magnetic induction approach. CFX allows introduction of user-defined variables using transport or Poisson equations. For MHD adaptation of the code three additional transport equations were introduced for the components of the magnetic field, in addition to the Poisson equation for electric potential. The Lorentz force is included in the momentum transport equation as a source term. Fusion applications usually involve very strong magnetic fields, with values of the Hartmann number of up to tens of thousands. In this situation a system of MHD equations become very rigid with very large source terms and very strong variable gradients. To increase system robustness, special measures were introduced during the iterative convergence process, such as linearization using source coefficient for momentum equations. The MHD implementation in general purpose CFD code was tested against benchmarks, specifically selected for liquid-metal blanket applications. Results of numerical simulations using present implementation closely match analytical solutions for a Hartmann number of up to 1500 for a 2-D laminar flow in the duct of square cross section, with conducting and nonconducting walls. Results for a 3-D test case are also included.« less

Numerical Analysis of 2-D and 3-D MHD Flows Relevant to Fusion Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khodak, Andrei

Here, the analysis of many fusion applications such as liquid-metal blankets requires application of computational fluid dynamics (CFD) methods for electrically conductive liquids in geometrically complex regions and in the presence of a strong magnetic field. A current state of the art general purpose CFD code allows modeling of the flow in complex geometric regions, with simultaneous conjugated heat transfer analysis in liquid and surrounding solid parts. Together with a magnetohydrodynamics (MHD) capability, the general purpose CFD code will be a valuable tool for the design and optimization of fusion devices. This paper describes an introduction of MHD capability intomore » the general purpose CFD code CFX, part of the ANSYS Workbench. The code was adapted for MHD problems using a magnetic induction approach. CFX allows introduction of user-defined variables using transport or Poisson equations. For MHD adaptation of the code three additional transport equations were introduced for the components of the magnetic field, in addition to the Poisson equation for electric potential. The Lorentz force is included in the momentum transport equation as a source term. Fusion applications usually involve very strong magnetic fields, with values of the Hartmann number of up to tens of thousands. In this situation a system of MHD equations become very rigid with very large source terms and very strong variable gradients. To increase system robustness, special measures were introduced during the iterative convergence process, such as linearization using source coefficient for momentum equations. The MHD implementation in general purpose CFD code was tested against benchmarks, specifically selected for liquid-metal blanket applications. Results of numerical simulations using present implementation closely match analytical solutions for a Hartmann number of up to 1500 for a 2-D laminar flow in the duct of square cross section, with conducting and nonconducting walls. Results for a 3-D test case are also included.« less

The general surgery model: a more appealing and sustainable alternative for the care of trauma patients.

PubMed

Roettger, Richard H; Taylor, Spence M; Youkey, Jerry R; Blackhurst, Dawn W

2005-08-01

The contemporary model of trauma care where dedicated trauma/critical care surgeons exclusively manage trauma patients has become progressively unsustainable. Little objective data, however, is available documenting that a better model exists. From September 2002 through August 2003, the trauma model at a 735-bed level I trauma teaching hospital was changed from the contemporary model to a new one where selected general surgeons with Advanced Trauma Life Support (ATLS) certification covered in-house trauma and emergency surgery call on a rotational basis. As well, each pursued elective practices, admitting all inpatients (trauma, emergent, elective) to a single teaching service (formerly the trauma service). Critical care was managed by a separate group of intensivists. The purpose of this study was to objectively compare the two models. Quantitative, financial, and qualitative data were derived from August 2001 to January 2002 (trauma/critical care model) and compared to August 2003 to January 2004 (general surgery model). During the two periods (trauma/critical care vs general surgery), the mean Revised Trauma Score (7.1 vs 7.2; P = 0.029), the mean Injury Severity Score (ISS) (10.9 vs 10.8; P = 0.84), and the percentage of penetrating trauma (12.5% vs 13.2%; P = 0.79) were similar. Differences (trauma/critical care vs general surgery, % increase/P value) included average daily census (24 vs 54, 225%), cases/attending (262 vs 543, 207%), cases/resident (54 vs 262, 485%), charges/attending (353,811 dollars vs 471,725 dollars, 133%), collections/attending (106,143 dollars vs 165,103 dollars, 156%), number of trauma patients (643 vs 748, 116%), trauma mortality (7.3% vs 4.0%; P = 0.007), trauma mortality with ISS >15 (21.7% vs 12.0%; P = 0.035), trauma complications (33.1% vs 17%; P < 0.001), and ICU morbidity (66.8% vs 43.9%; P < .001). The new general surgery model produced superior financial results and better quantitative surgical experience while exceeding trauma and ICU quality outcomes compared to the former trauma/critical care model. These data objectively support a model such as ours--one that is financially sustainable and more professionally attractive.

WHAT IS A MOMENT ARM? CALCULATING MUSCLE EFFECTIVENESS IN BIOMECHANICAL MODELS USING GENERALIZED COORDINATES

PubMed Central

Seth, Ajay; Delp, Scott L.

2015-01-01

Biomechanics researchers often use multibody models to represent biological systems. However, the mapping from biology to mechanics and back can be problematic. OpenSim is a popular open source tool used for this purpose, mapping between biological specifications and an underlying generalized coordinate multibody system called Simbody. One quantity of interest to biomechanical researchers and clinicians is “muscle moment arm,” a measure of the effectiveness of a muscle at contributing to a particular motion over a range of configurations. OpenSim can automatically calculate these quantities for any muscle once a model has been built. For simple cases, this calculation is the same as the conventional moment arm calculation in mechanical engineering. But a muscle may span several joints (e.g., wrist, neck, back) and may follow a convoluted path over various curved surfaces. A biological joint may require several bodies or even a mechanism to accurately represent in the multibody model (e.g., knee, shoulder). In these situations we need a careful definition of muscle moment arm that is analogous to the mechanical engineering concept, yet generalized to be of use to biomedical researchers. Here we present some biomechanical modeling challenges and how they are resolved in OpenSim and Simbody to yield biologically meaningful muscle moment arms. PMID:25905111

WHAT IS A MOMENT ARM? CALCULATING MUSCLE EFFECTIVENESS IN BIOMECHANICAL MODELS USING GENERALIZED COORDINATES.

PubMed

Sherman, Michael A; Seth, Ajay; Delp, Scott L

2013-08-01

Biomechanics researchers often use multibody models to represent biological systems. However, the mapping from biology to mechanics and back can be problematic. OpenSim is a popular open source tool used for this purpose, mapping between biological specifications and an underlying generalized coordinate multibody system called Simbody. One quantity of interest to biomechanical researchers and clinicians is "muscle moment arm," a measure of the effectiveness of a muscle at contributing to a particular motion over a range of configurations. OpenSim can automatically calculate these quantities for any muscle once a model has been built. For simple cases, this calculation is the same as the conventional moment arm calculation in mechanical engineering. But a muscle may span several joints (e.g., wrist, neck, back) and may follow a convoluted path over various curved surfaces. A biological joint may require several bodies or even a mechanism to accurately represent in the multibody model (e.g., knee, shoulder). In these situations we need a careful definition of muscle moment arm that is analogous to the mechanical engineering concept, yet generalized to be of use to biomedical researchers. Here we present some biomechanical modeling challenges and how they are resolved in OpenSim and Simbody to yield biologically meaningful muscle moment arms.

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

21 CFR 880.6890 - General purpose disinfectants.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false General purpose disinfectants. 880.6890 Section 880.6890 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... topical contact with intact skin. (b) Classification. Class I (general controls). The device is exempt...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations under which the Secretary will administer a Summer Food Service... nonprofit food service programs for children during the summer months and at other approved times. The...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations under which the Secretary will administer a Summer Food Service... nonprofit food service programs for children during the summer months and at other approved times. The...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations under which the Secretary will administer a Summer Food Service... nonprofit food service programs for children during the summer months and at other approved times. The...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations under which the Secretary will administer a Summer Food Service... nonprofit food service programs for children during the summer months and at other approved times. The...

Finite-deformation phase-field chemomechanics for multiphase, multicomponent solids

NASA Astrophysics Data System (ADS)

Svendsen, Bob; Shanthraj, Pratheek; Raabe, Dierk

2018-03-01

The purpose of this work is the development of a framework for the formulation of geometrically non-linear inelastic chemomechanical models for a mixture of multiple chemical components diffusing among multiple transforming solid phases. The focus here is on general model formulation. No specific model or application is pursued in this work. To this end, basic balance and constitutive relations from non-equilibrium thermodynamics and continuum mixture theory are combined with a phase-field-based description of multicomponent solid phases and their interfaces. Solid phase modeling is based in particular on a chemomechanical free energy and stress relaxation via the evolution of phase-specific concentration fields, order-parameter fields (e.g., related to chemical ordering, structural ordering, or defects), and local internal variables. At the mixture level, differences or contrasts in phase composition and phase local deformation in phase interface regions are treated as mixture internal variables. In this context, various phase interface models are considered. In the equilibrium limit, phase contrasts in composition and local deformation in the phase interface region are determined via bulk energy minimization. On the chemical side, the equilibrium limit of the current model formulation reduces to a multicomponent, multiphase, generalization of existing two-phase binary alloy interface equilibrium conditions (e.g., KKS). On the mechanical side, the equilibrium limit of one interface model considered represents a multiphase generalization of Reuss-Sachs conditions from mechanical homogenization theory. Analogously, other interface models considered represent generalizations of interface equilibrium conditions consistent with laminate and sharp-interface theory. In the last part of the work, selected existing models are formulated within the current framework as special cases and discussed in detail.

Multilevel Modeling in Psychosomatic Medicine Research

PubMed Central

Myers, Nicholas D.; Brincks, Ahnalee M.; Ames, Allison J.; Prado, Guillermo J.; Penedo, Frank J.; Benedict, Catherine

2012-01-01

The primary purpose of this manuscript is to provide an overview of multilevel modeling for Psychosomatic Medicine readers and contributors. The manuscript begins with a general introduction to multilevel modeling. Multilevel regression modeling at two-levels is emphasized because of its prevalence in psychosomatic medicine research. Simulated datasets based on some core ideas from the Familias Unidas effectiveness study are used to illustrate key concepts including: communication of model specification, parameter interpretation, sample size and power, and missing data. Input and key output files from Mplus and SAS are provided. A cluster randomized trial with repeated measures (i.e., three-level regression model) is then briefly presented with simulated data based on some core ideas from a cognitive behavioral stress management intervention in prostate cancer. PMID:23107843

General purpose bioamplifier study

NASA Technical Reports Server (NTRS)

1972-01-01

Based on known inputs and outputs, a set of specifications were developed for the major characteristics of a general purpose amplifier for use in the Integrated Medical, Behaviorial, and Laboratory Measurement System.

Attitude Determination Error Analysis System (ADEAS) mathematical specifications document

NASA Technical Reports Server (NTRS)

Nicholson, Mark; Markley, F.; Seidewitz, E.

1988-01-01

The mathematical specifications of Release 4.0 of the Attitude Determination Error Analysis System (ADEAS), which provides a general-purpose linear error analysis capability for various spacecraft attitude geometries and determination processes, are presented. The analytical basis of the system is presented. The analytical basis of the system is presented, and detailed equations are provided for both three-axis-stabilized and spin-stabilized attitude sensor models.

Estimation of the Level of Cognitive Development of a Preschool Child Using the System of Situations with Mathematical Contents

ERIC Educational Resources Information Center

Gorev, Pavel M.; Bichurina, Svetlana Y.; Yakupova, Rufiya M.; Khairova, Irina V.

2016-01-01

Cognitive development of personality can be considered as one of the key directions of preschool education presented in the world practice, where preschool programs are educational ones, and preschool education is the first level of the general education. Thereby the purpose of the research is to create a model of reliable estimation of cognitive…

Contingency, Employment Intentions, and Retention of Vulnerable Low-Wage Workers: An Examination of Nursing Assistants in Nursing Homes

ERIC Educational Resources Information Center

Dill, Janette S.; Morgan, Jennifer Craft; Marshall, Victor W.

2013-01-01

Purpose of the Study: While theories of job turnover generally assume a strong correlation between job satisfaction, intention, and retention, such models may be limited in explaining turnover of low-wage health care workers. Low-wage workers likely have a lower ability to act on their employment intentions or plans due to a lack of resources that…

Examining Teachers' Attitudes and Experiences with Coaching to Inform Research-Based Practice: An Iterative Developmental Design Study

ERIC Educational Resources Information Center

Shernoff, Elisa S.; Lekwa, Adam J.; Reddy, Linda A.; Coccaro, Candace

2017-01-01

The purpose of this qualitative study was to examine teachers' attitudes and experiences with coaching. This study was conducted in advance of a planned randomized controlled trial of a coaching intervention to better align the model with teachers' needs and goals. Thirty-four K-5 general (n = 26), special education (n = 6), and educational…

Applying the Concrete-Semiconcrete-Abstract Instructional Sequence in Model-Based Teaching to Facilitate the Learning of Area and Volume by Students with Mild Intellectual Disability

ERIC Educational Resources Information Center

Hord, Timothy Casey

2012-01-01

In the current educational climate of IDEA 2004 and No Child Left Behind, teachers are required to find methods to give all students, including students with mild intellectual disability, access to the general education curriculum. The purpose of this study was to investigate the effects of instruction integrating the…

Investigation of the Self-Regulated Learning Strategies of Students from the Faculty of Education Using Ordinal Logistic Regression Analysis

ERIC Educational Resources Information Center

Bozpolat, Ebru

2016-01-01

The purpose of this study was to reveal whether the low, medium, and high level self-regulated learning strategies of third year students at the Education Faculty of Cumhuriyet University can be predicted by the variables of gender, academic self-efficacy, and general academic average. The study uses the Relational Screening Model. The dependent…

Special electrical machines: Sources and converters of energy

NASA Astrophysics Data System (ADS)

Bertinov, A. I.; But, D. A.; Miziurin, S. R.; Alievskii, B. L.; Sineva, N. V.

The principles underlying the operation of electromechanical and dynamic energy converters are discussed, along with those for the direct conversion of solar, thermal, and chemical energy into electrical energy. The theory for electromechanical and dynamic converters is formulated using a generalized model for the electromechanical conversion of energy. Particular attention is given to electrical machinery designed for special purposes. Features of superconductor electrical machines are discussed.

Examining the Inseparability of Content Knowledge from LSP Reading Ability: An Approach Combining Bifactor-Multidimensional Item Response Theory and Structural Equation Modeling

ERIC Educational Resources Information Center

Cai, Yuyang; Kunnan, Antony John

2018-01-01

This study examined the separability of domain-general and domain-specific content knowledge from Language for Specific Purposes (LSP) reading ability. A pool of 1,491 nursing students in China participated by responding to a nursing English test and a nursing knowledge test. Primary data analysis involved four steps: (a) conducting a…

A Maximal Graded Exercise Test to Accurately Predict VO2max in 18-65-Year-Old Adults

ERIC Educational Resources Information Center

George, James D.; Bradshaw, Danielle I.; Hyde, Annette; Vehrs, Pat R.; Hager, Ronald L.; Yanowitz, Frank G.

2007-01-01

The purpose of this study was to develop an age-generalized regression model to predict maximal oxygen uptake (VO sub 2 max) based on a maximal treadmill graded exercise test (GXT; George, 1996). Participants (N = 100), ages 18-65 years, reached a maximal level of exertion (mean plus or minus standard deviation [SD]; maximal heart rate [HR sub…

Using a Catholic Model: The Consequences of the Changing Strategic Purpose of Anglican Faith Schools and the Contrasting Interpretations within Liberalism

ERIC Educational Resources Information Center

Johnson, Helen

2003-01-01

Until comparatively recently, the survival and success of Church of England and Roman Catholic schools within the English dual system was not given much attention by liberal commentators. However, the general popularity of faith schools among parents and their particular role within current government policy has encouraged the Church of England to…

An analytical model of leakage neutron equivalent dose for passively-scattered proton radiotherapy and validation with measurements.

PubMed

Schneider, Christopher; Newhauser, Wayne; Farah, Jad

2015-05-18

Exposure to stray neutrons increases the risk of second cancer development after proton therapy. Previously reported analytical models of this exposure were difficult to configure and had not been investigated below 100 MeV proton energy. The purposes of this study were to test an analytical model of neutron equivalent dose per therapeutic absorbed dose  at 75 MeV and to improve the model by reducing the number of configuration parameters and making it continuous in proton energy from 100 to 250 MeV. To develop the analytical model, we used previously published H/D values in water from Monte Carlo simulations of a general-purpose beamline for proton energies from 100 to 250 MeV. We also configured and tested the model on in-air neutron equivalent doses measured for a 75 MeV ocular beamline. Predicted H/D values from the analytical model and Monte Carlo agreed well from 100 to 250 MeV (10% average difference). Predicted H/D values from the analytical model also agreed well with measurements at 75 MeV (15% average difference). The results indicate that analytical models can give fast, reliable calculations of neutron exposure after proton therapy. This ability is absent in treatment planning systems but vital to second cancer risk estimation.

Modeling the Lexical Morphology of Western Handwritten Signatures

PubMed Central

Diaz-Cabrera, Moises; Ferrer, Miguel A.; Morales, Aythami

2015-01-01

A handwritten signature is the final response to a complex cognitive and neuromuscular process which is the result of the learning process. Because of the many factors involved in signing, it is possible to study the signature from many points of view: graphologists, forensic experts, neurologists and computer vision experts have all examined them. Researchers study written signatures for psychiatric, penal, health and automatic verification purposes. As a potentially useful, multi-purpose study, this paper is focused on the lexical morphology of handwritten signatures. This we understand to mean the identification, analysis, and description of the signature structures of a given signer. In this work we analyze different public datasets involving 1533 signers from different Western geographical areas. Some relevant characteristics of signature lexical morphology have been selected, examined in terms of their probability distribution functions and modeled through a General Extreme Value distribution. This study suggests some useful models for multi-disciplinary sciences which depend on handwriting signatures. PMID:25860942

19 CFR 201.202 - Purpose and scope of salary and administrative offset rules.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Purpose and scope of salary and administrative offset rules. 201.202 Section 201.202 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Debt Collection § 201.202 Purpose and scope of salary and administrative...

19 CFR 201.202 - Purpose and scope of salary and administrative offset rules.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Purpose and scope of salary and administrative offset rules. 201.202 Section 201.202 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Debt Collection § 201.202 Purpose and scope of salary and administrative...

19 CFR 201.202 - Purpose and scope of salary and administrative offset rules.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Purpose and scope of salary and administrative offset rules. 201.202 Section 201.202 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Debt Collection § 201.202 Purpose and scope of salary and administrative...