40 CFR 721.11 - Applicability determination when the specific chemical identity is confidential.

Code of Federal Regulations, 2012 CFR

2012-07-01

... specific chemical identity is confidential. 721.11 Section 721.11 Protection of Environment ENVIRONMENTAL... General Provisions § 721.11 Applicability determination when the specific chemical identity is...: SNUR Bonafide submissions. (1) The specific chemical identity of the chemical substance that the person...

40 CFR 721.11 - Applicability determination when the specific chemical identity is confidential.

Code of Federal Regulations, 2013 CFR

2013-07-01

... specific chemical identity is confidential. 721.11 Section 721.11 Protection of Environment ENVIRONMENTAL... General Provisions § 721.11 Applicability determination when the specific chemical identity is...: SNUR Bonafide submissions. (1) The specific chemical identity of the chemical substance that the person...

40 CFR 721.11 - Applicability determination when the specific chemical identity is confidential.

Code of Federal Regulations, 2014 CFR

2014-07-01

... specific chemical identity is confidential. 721.11 Section 721.11 Protection of Environment ENVIRONMENTAL... General Provisions § 721.11 Applicability determination when the specific chemical identity is...: SNUR Bonafide submissions. (1) The specific chemical identity of the chemical substance that the person...

40 CFR 721.11 - Applicability determination when the specific chemical identity is confidential.

Code of Federal Regulations, 2011 CFR

2011-07-01

... specific chemical identity is confidential. 721.11 Section 721.11 Protection of Environment ENVIRONMENTAL... General Provisions § 721.11 Applicability determination when the specific chemical identity is...: SNUR Bonafide submissions. (1) The specific chemical identity of the chemical substance that the person...

Hanford Facility Dangerous Waste Permit Application for T Plant Complex

DOE Office of Scientific and Technical Information (OSTI.GOV)

BARNES, B.M.

2002-09-01

The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, operating treatment, storage, and/or disposal units, such as the T Plant Complex (this document, DOE/RL-95-36). Both the General Information and Unit-Specific portions of the Hanford Facility Dangerous Waste Permit Application address the content of the Part B permit application guidance prepared by the Washington State Department of Ecology (Ecology 1996) and the U.S. Environmental Protection Agencymore » (40 Code of Federal Regulations 270), with additional information needs defined by the Hazardous and Solid Waste Amendments and revisions of Washington Administrative Code 173-303. For ease of reference, the Washington State Department of Ecology alpha-numeric section identifiers from the permit application guidance documentation (Ecology 1996) follow, in brackets, the chapter headings and subheadings. A checklist indicating where information is contained in the T Plant Complex permit application documentation, in relation to the Washington State Department of Ecology guidance, is located in the Contents Section. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (e.g., the glossary provided in the General Information Portion). Wherever appropriate, the T Plant Complex permit application documentation makes cross-reference to the General Information Portion, rather than duplicating text.« less

Constructing a Prototype: Realizing a Scholarship of Practice in General Education

ERIC Educational Resources Information Center

Wells, Cynthia A.

2017-01-01

This chapter will construct a prototype of a scholarship of practice through specific application to general education. The chapter includes specific illustrations and potential challenges for such an endeavor.

10 CFR 30.33 - General requirements for issuance of specific licenses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false General requirements for issuance of specific licenses. 30.33 Section 30.33 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC... other benefits against environmental costs and considering available alternatives, that the action...

10 CFR 30.33 - General requirements for issuance of specific licenses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false General requirements for issuance of specific licenses. 30.33 Section 30.33 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC... other benefits against environmental costs and considering available alternatives, that the action...

49 CFR 178.345 - General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles. 178.345 Section 178.345 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS...

49 CFR 178.345 - General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles. 178.345 Section 178.345 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS...

49 CFR 179.300 - General specifications applicable to multi-unit tank car tanks designed to be removed from car...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false General specifications applicable to multi-unit tank car tanks designed to be removed from car structure for filling and emptying (Classes DOT-106A and 110AW). 179.300 Section 179.300 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...

49 CFR 178.345 - General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles. 178.345 Section 178.345 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS...

Study of small turbofan engines applicable to general-aviation aircraft

NASA Technical Reports Server (NTRS)

Merrill, G. L.; Burnett, G. A.; Alsworth, C. C.

1973-01-01

The applicability of small turbofan engines to general aviation aircraft is discussed. The engine and engine/airplane performance, weight, size, and cost interrelationships are examined. The effects of specific engine noise constraints are evaluated. The factors inhibiting the use of turbofan engines in general aviation aircraft are identified.

10 CFR 1016.6 - Specific waivers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Specific waivers. 1016.6 Section 1016.6 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) SAFEGUARDING OF RESTRICTED DATA General Provisions § 1016.6 Specific waivers. DOE may, upon application of any interested party, grant such waivers from the requirements of...

10 CFR 1016.6 - Specific waivers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Specific waivers. 1016.6 Section 1016.6 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) SAFEGUARDING OF RESTRICTED DATA General Provisions § 1016.6 Specific waivers. DOE may, upon application of any interested party, grant such waivers from the requirements of...

Golf Instruction. An Application of Schmidt's Generalized Motor Program.

ERIC Educational Resources Information Center

Asbell, Ann C.

1989-01-01

This article describes how application of the generalized motor program, conceptualized by Schmidt, can yield consistent and effective results when teaching students the golf swing. Specific teaching suggestions are given and a brief discussion of the applicability of this program to tennis and swimming is included. (JAH)

10 CFR 30.33 - General requirements for issuance of specific licenses.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false General requirements for issuance of specific licenses. 30.33 Section 30.33 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC..., and other benefits against environmental costs and considering available alternatives, that the action...

10 CFR 30.33 - General requirements for issuance of specific licenses.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false General requirements for issuance of specific licenses. 30.33 Section 30.33 Energy NUCLEAR REGULATORY COMMISSION RULES OF GENERAL APPLICABILITY TO DOMESTIC... benefits against environmental costs and considering available alternatives, that the action called for is...

Improved specifications for hydraulic cement concrete : final report.

DOT National Transportation Integrated Search

1983-01-01

This is the final report of a study of the application of statistical concepts to specifications for hydraulic cement concrete as used in highway facilities. It reviews the general problems associated with the application of statistical techniques to...

25 CFR 547.5 - What are the rules of interpretation and of general application for this part?

Code of Federal Regulations, 2012 CFR

2012-04-01

... GAMES § 547.5 What are the rules of interpretation and of general application for this part? (a) Minimum... manufacturer's design and operating specifications. (f) No Limitation of Technology. This part should not be...

25 CFR 547.5 - What are the rules of interpretation and of general application for this part?

Code of Federal Regulations, 2011 CFR

2011-04-01

... GAMES § 547.5 What are the rules of interpretation and of general application for this part? (a) Minimum... manufacturer's design and operating specifications. (f) No Limitation of Technology. This part should not be...

44 CFR 206.400 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

44 CFR 206.400 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... standards of safety, decency, and sanitation and in conformity with applicable codes, specifications and standards. (b) Applicable codes, specifications, and standards shall include any disaster resistant building code that meets the minimum requirements of the National Flood Insurance Program (NFIP) as well as...

Miami-Dade Community College: Applications at the Wolfson Campus.

ERIC Educational Resources Information Center

Padron, Eduardo J.; Levitt, Ted

1995-01-01

Reviews the Miami-Dade Community College (MDCC) general education program, focusing on the program's specific applications at MDCC's Wolfson Campus. Indicates that general education at the Campus involves education in environmental issues, social studies, humanities, multicultural awareness, the cultivation of individual responsibility, and…

Preparation guide for class B software specification documents

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1979-01-01

General conceptual requirements and specific application rules and procedures are provided for the production of software specification documents in conformance with deep space network software standards and class B standards. Class B documentation is identified as the appropriate level applicable to implementation, sustaining engineering, and operational uses by qualified personnel. Special characteristics of class B documents are defined.

5 CFR 2638.501 - In general.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Executive Agency Employees § 2638.501 In general. (a) Authority. The Director of the Office of Government... remedial action with respect to individual employees to bring about compliance with applicable ethics... penalty as well as any statute made applicable to a specific agency that mandates or proscribes conduct...

300 Area waste acid treatment system closure plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

LUKE, S.N.

1999-05-17

The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOERL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion includes closure plan documentation submitted for individual, treatment, storage, and/or disposal units undergoing closure, such as the 300 Area Waste Acid Treatment System. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (e.g., the glossary provided in the General Information Portion). Whenever appropriate, 300 Area Waste Acid Treatment System documentation makes cross-reference to themore » General Information Portion, rather than duplicating text. This 300 Area Waste Acid Treatment System Closure Plan (Revision 2) includes a Hanford Facility Dangerous Waste Permit Application, Part A, Form 3. Information provided in this closure plan is current as of April 1999.« less

18 CFR 367.81 - Maintenance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... maintenance work. A list of work operations applicable generally to service company property is included in paragraph (d) of this section. Other work operations applicable to specific classes of property are listed... repairs which have been made. (3) Work performed specifically for the purpose of preventing failure...

22 CFR 125.4 - Exemptions of general applicability.

Code of Federal Regulations, 2012 CFR

2012-04-01

... boundaries of a “Build-to-Print” data package; (2) Build/Design-to-Specification. “Build/Design-to... THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.4 Exemptions of general applicability. (a) The following exemptions apply to exports of technical data for which approval is not needed...

22 CFR 125.4 - Exemptions of general applicability.

Code of Federal Regulations, 2013 CFR

2013-04-01

... boundaries of a “Build-to-Print” data package; (2) Build/Design-to-Specification. “Build/Design-to... THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.4 Exemptions of general applicability. (a) The following exemptions apply to exports of technical data for which approval is not needed...

22 CFR 125.4 - Exemptions of general applicability.

Code of Federal Regulations, 2011 CFR

2011-04-01

... boundaries of a “Build-to-Print” data package; (2) Build/Design-to-Specification. “Build/Design-to... THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.4 Exemptions of general applicability. (a) The following exemptions apply to exports of technical data for which approval is not needed...

22 CFR 125.4 - Exemptions of general applicability.

Code of Federal Regulations, 2014 CFR

2014-04-01

... boundaries of a “Build-to-Print” data package; (2) Build/Design-to-Specification. “Build/Design-to... THE EXPORT OF TECHNICAL DATA AND CLASSIFIED DEFENSE ARTICLES § 125.4 Exemptions of general applicability. (a) The following exemptions apply to exports of technical data for which approval is not needed...

Hanford facility dangerous waste permit application, PUREX storage tunnels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haas, C. R.

1997-09-08

The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, `operating` treatment, storage, and/or disposal units, such as the PUREX Storage Tunnels (this document, DOE/RL-90-24).

Land Application of Wastes: An Educational Program. Design Procedures for Land Application of Wastes - Module 6, Objectives, Script and Figures.

ERIC Educational Resources Information Center

Clarkson, W. W.; And Others

The purpose of this module is to develop a general procedure to decide the feasibility of land application as a waste management alternative, given a specific problem situation. This information provides a framework within which to apply the information presented in all other modules in the program. An outline of the general procedure followed in…

37 CFR 1.77 - Arrangement of application elements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Arrangement of application..., DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions Specification § 1.77 Arrangement of application elements. (a) The elements of the application, if applicable, should...

10 CFR 40.32 - General requirements for issuance of specific licenses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false General requirements for issuance of specific licenses. 40.32 Section 40.32 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF SOURCE MATERIAL License... applicant is qualified by reason of training and experience to use the source material for the purpose...

42 CFR 441.202 - General rule.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES Abortions § 441.202 General rule. FFP is not available in expenditures for an abortion unless the conditions specified in...

42 CFR 441.202 - General rule.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES Abortions § 441.202 General rule. FFP is not available in expenditures for an abortion unless the conditions specified in...

42 CFR 441.202 - General rule.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES Abortions § 441.202 General rule. FFP is not available in expenditures for an abortion unless the conditions specified in...

42 CFR 441.202 - General rule.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES Abortions § 441.202 General rule. FFP is not available in expenditures for an abortion unless the conditions specified in...

42 CFR 441.202 - General rule.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES Abortions § 441.202 General rule. FFP is not available in expenditures for an abortion unless the conditions specified in...

Automatic Dynamic Aircraft Modeler (ADAM) for the Computer Program NASTRAN

NASA Technical Reports Server (NTRS)

Griffis, H.

1985-01-01

Large general purpose finite element programs require users to develop large quantities of input data. General purpose pre-processors are used to decrease the effort required to develop structural models. Further reduction of effort can be achieved by specific application pre-processors. Automatic Dynamic Aircraft Modeler (ADAM) is one such application specific pre-processor. General purpose pre-processors use points, lines and surfaces to describe geometric shapes. Specifying that ADAM is used only for aircraft structures allows generic structural sections, wing boxes and bodies, to be pre-defined. Hence with only gross dimensions, thicknesses, material properties and pre-defined boundary conditions a complete model of an aircraft can be created.

49 CFR 179.400 - General specification applicable to cryogenic liquid tank car tanks.

Code of Federal Regulations, 2010 CFR

2010-10-01

... liquid tank car tanks. 179.400 Section 179.400 Transportation Other Regulations Relating to... MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specification for Cryogenic Liquid Tank Car Tanks and... liquid tank car tanks. ...

40 CFR 403.19 - Provisions of specific applicability to the Owatonna Waste Water Treatment Facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GENERAL PRETREATMENT REGULATIONS FOR EXISTING AND NEW SOURCES OF POLLUTION § 403.19 Provisions of specific applicability to the... Noncompliance subject to the publication requirement in § 403.8(f)(2)(vii) at the Minnesota Pollution Control...

Sixth NASTRAN (R) Users' Colloquium

NASA Technical Reports Server (NTRS)

1977-01-01

Papers are presented on NASTRAN programming, and substructuring methods, as well as on fluids and thermal applications. Specific applications and capabilities of NASTRAN were also delineated along with general auxiliary programs.

Space Qualification Test of a-Silicon Solar Cell Modules

NASA Technical Reports Server (NTRS)

Kim, Q.; Lawton, R. A.; Manion, S. J.; Okuno, J. O.; Ruiz, R. P.; Vu, D. T.; Kayali, S. A.; Jeffrey, F. R.

1997-01-01

The basic requirement of solar cell modules for space applications are generally described in MIL-S-83576 for the specific needs of the USAF. However, the specifications of solar cells intended for use on space terrestrial applications are not well defined. Therefore this qualification test effort was concentrated on critical areas specific to the microseismometer probe which is intended to be included in the Mars microprobe programs.

An Interface for Specifying Rigid-Body Motions for CFD Applications

NASA Technical Reports Server (NTRS)

Murman, Scott M.; Chan, William; Aftosmis, Michael; Meakin, Robert L.; Kwak, Dochan (Technical Monitor)

2003-01-01

An interface for specifying rigid-body motions for CFD applications is presented. This interface provides a means of describing a component hierarchy in a geometric configuration, as well as the motion (prescribed or six-degree-of-freedom) associated with any component. The interface consists of a general set of datatypes, along with rules for their interaction, and is designed to be flexible in order to evolve as future needs dictate. The specification is currently implemented with an XML file format which is portable across platforms and applications. The motion specification is capable of describing general rigid body motions, and eliminates the need to write and compile new code within the application software for each dynamic configuration, allowing client software to automate dynamic simulations. The interface is integrated with a GUI tool which allows rigid body motions to be prescribed and verified interactively, promoting access to non-expert users. Illustrative examples, as well as the raw XML source of the file specifications, are included.

Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coenenberg, J.G.

1997-08-15

The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, `operating` treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit applicationmore » guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than duplicating text. 38 39 Information provided in this Liquid Effluent Retention Facility and 40 200 Area Effluent Treatment Facility permit application documentation is 41 current as of June 1, 1997.« less

46 CFR 98.01-1 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK General § 98.01-1 Applicability. (a... the dangerous cargoes specifically noted in this part. (b) [Reserved] (c) The regulations for barges...

Hybrid rocket propulsion

NASA Technical Reports Server (NTRS)

Holzman, Allen L.

1993-01-01

Topics addressed are: (1) comparison of the theoretical impulses; (2) comparison of the density-specific impulses; (3) general propulsion system features comparison; (4) hybrid systems, booster applications; and (5) hybrid systems, upper stage propulsion applications.

46 CFR 160.026-1 - Applicable specifications and standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Water, Emergency Drinking (In...) General. The following specifications and standard, of the issue in effect on the date emergency drinking water is packed, form a part of this subpart: (1) Military specifications: MIL-L-7178—Lacquer; cellulose...

46 CFR 160.026-1 - Applicable specifications and standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Water, Emergency Drinking (In...) General. The following specifications and standard, of the issue in effect on the date emergency drinking water is packed, form a part of this subpart: (1) Military specifications: MIL-L-7178—Lacquer; cellulose...

46 CFR 160.026-1 - Applicable specifications and standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Water, Emergency Drinking (In...) General. The following specifications and standard, of the issue in effect on the date emergency drinking water is packed, form a part of this subpart: (1) Military specifications: MIL-L-7178—Lacquer; cellulose...

46 CFR 160.026-1 - Applicable specifications and standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Water, Emergency Drinking (In...) General. The following specifications and standard, of the issue in effect on the date emergency drinking water is packed, form a part of this subpart: (1) Military specifications: MIL-L-7178—Lacquer; cellulose...

45 CFR 170.101 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY General Provisions § 170.101 Applicability. The standards...

45 CFR 170.101 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY General Provisions § 170.101 Applicability. The standards...

45 CFR 170.101 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY General Provisions § 170.101 Applicability. The standards...

45 CFR 170.101 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY General Provisions § 170.101 Applicability. The standards...

45 CFR 170.101 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Welfare Department of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY General Provisions § 170.101 Applicability. The standards...

28 CFR 31.300 - General.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 1 2014-07-01 2014-07-01 false General. 31.300 Section 31.300 Judicial Administration DEPARTMENT OF JUSTICE OJJDP GRANT PROGRAMS Formula Grants Juvenile Justice Act Requirements § 31.300 General. This subpart sets forth specific JJDP Act requirements for application and receipt of...

28 CFR 31.300 - General.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 1 2011-07-01 2011-07-01 false General. 31.300 Section 31.300 Judicial Administration DEPARTMENT OF JUSTICE OJJDP GRANT PROGRAMS Formula Grants Juvenile Justice Act Requirements § 31.300 General. This subpart sets forth specific JJDP Act requirements for application and receipt of...

28 CFR 31.300 - General.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 1 2012-07-01 2012-07-01 false General. 31.300 Section 31.300 Judicial Administration DEPARTMENT OF JUSTICE OJJDP GRANT PROGRAMS Formula Grants Juvenile Justice Act Requirements § 31.300 General. This subpart sets forth specific JJDP Act requirements for application and receipt of...

28 CFR 31.300 - General.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false General. 31.300 Section 31.300 Judicial Administration DEPARTMENT OF JUSTICE OJJDP GRANT PROGRAMS Formula Grants Juvenile Justice Act Requirements § 31.300 General. This subpart sets forth specific JJDP Act requirements for application and receipt of...

28 CFR 31.300 - General.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 1 2013-07-01 2013-07-01 false General. 31.300 Section 31.300 Judicial Administration DEPARTMENT OF JUSTICE OJJDP GRANT PROGRAMS Formula Grants Juvenile Justice Act Requirements § 31.300 General. This subpart sets forth specific JJDP Act requirements for application and receipt of...

MO-E-12A-01: Quantitative Imaging: Techniques, Applications, and Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, E; Jeraj, R; McNitt-Gray, M

The first symposium in the Quantitative Imaging Track focused on the introduction of quantitative imaging (QI) by illustrating the potential of QI in diagnostic and therapeutic applications in research and patient care, highlighting key challenges in implementation of such QI applications, and reviewing QI efforts of selected national and international agencies and organizations, including the FDA, NCI, NIST, and RSNA. This second QI symposium will focus more specifically on the techniques, applications, and challenges of QI. The first talk of the session will focus on modalityagnostic challenges of QI, beginning with challenges of the development and implementation of QI applicationsmore » in single-center, single-vendor settings and progressing to the challenges encountered in the most general setting of multi-center, multi-vendor settings. The subsequent three talks will focus on specific QI challenges and opportunities in the modalityspecific settings of CT, PET/CT, and MR. Each talk will provide information on modality-specific QI techniques, applications, and challenges, including current efforts focused on solutions to such challenges. Learning Objectives: Understand key general challenges of QI application development and implementation, regardless of modality. Understand selected QI techniques and applications in CT, PET/CT, and MR. Understand challenges, and potential solutions for such challenges, for the applications presented for each modality.« less

10 CFR 420.33 - Application requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Application requirements. 420.33 Section 420.33 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Implementation of Special Projects Financial... general and special project activity-specific requirements for applications for special projects financial...

10 CFR 420.33 - Application requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Application requirements. 420.33 Section 420.33 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Implementation of Special Projects Financial... general and special project activity-specific requirements for applications for special projects financial...

10 CFR 420.33 - Application requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Application requirements. 420.33 Section 420.33 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Implementation of Special Projects Financial... general and special project activity-specific requirements for applications for special projects financial...

10 CFR 420.33 - Application requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Application requirements. 420.33 Section 420.33 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Implementation of Special Projects Financial... general and special project activity-specific requirements for applications for special projects financial...

10 CFR 420.33 - Application requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Application requirements. 420.33 Section 420.33 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Implementation of Special Projects Financial... general and special project activity-specific requirements for applications for special projects financial...

40 CFR 92.123 - Test procedure; general requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... designed to determine the brake specific emissions of hydrocarbons (HC, total or non-methane as applicable... of calculating brake specific emissions. (v) The engine may be equipped with a production type...

40 CFR 92.123 - Test procedure; general requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... designed to determine the brake specific emissions of hydrocarbons (HC, total or non-methane as applicable... of calculating brake specific emissions. (v) The engine may be equipped with a production type...

40 CFR 92.123 - Test procedure; general requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... designed to determine the brake specific emissions of hydrocarbons (HC, total or non-methane as applicable... of calculating brake specific emissions. (v) The engine may be equipped with a production type...

40 CFR 92.123 - Test procedure; general requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... designed to determine the brake specific emissions of hydrocarbons (HC, total or non-methane as applicable... of calculating brake specific emissions. (v) The engine may be equipped with a production type...

49 CFR 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., intermediate bulk containers, multi-unit tank car tanks, portable tanks, or tank cars. Cargo tank motor vehicle... specification cargo tank motor vehicles. 178.320 Section 178.320 Transportation Other Regulations Relating to... MATERIALS REGULATIONS SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle...

49 CFR 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., intermediate bulk containers, multi-unit tank car tanks, portable tanks, or tank cars. Cargo tank motor vehicle... specification cargo tank motor vehicles. 178.320 Section 178.320 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation...

49 CFR 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., intermediate bulk containers, multi-unit tank car tanks, portable tanks, or tank cars. Cargo tank motor vehicle... specification cargo tank motor vehicles. 178.320 Section 178.320 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation...

49 CFR 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., intermediate bulk containers, multi-unit tank car tanks, portable tanks, or tank cars. Cargo tank motor vehicle... specification cargo tank motor vehicles. 178.320 Section 178.320 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation...

49 CFR 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., intermediate bulk containers, multi-unit tank car tanks, portable tanks, or tank cars. Cargo tank motor vehicle... specification cargo tank motor vehicles. 178.320 Section 178.320 Transportation Other Regulations Relating to... (CONTINUED) SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation...

14 CFR 65.101 - Eligibility requirements: General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Administrator and is specifically designed to qualify the applicant for the job on which the applicant is to be...) This section does not apply to the issuance of a repairman certificate (experimental aircraft builder...

14 CFR 65.101 - Eligibility requirements: General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Administrator and is specifically designed to qualify the applicant for the job on which the applicant is to be...) This section does not apply to the issuance of a repairman certificate (experimental aircraft builder...

14 CFR 65.101 - Eligibility requirements: General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Administrator and is specifically designed to qualify the applicant for the job on which the applicant is to be...) This section does not apply to the issuance of a repairman certificate (experimental aircraft builder...

14 CFR 211.10 - Filing specifications.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) ECONOMIC REGULATIONS APPLICATIONS FOR PERMITS TO FOREIGN AIR CARRIERS General Requirements § 211.10 Filing... in § 302.3 of this chapter as to execution, number of copies, and formal specifications of papers. (b...

10 CFR 37.11 - Specific exemptions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... sources, ion-exchange resins, or activated material that weighs less than 2,000 kg (4,409 lbs) is not... General Provisions § 37.11 Specific exemptions. (a) The Commission may, upon application of any interested...

10 CFR Appendix B to Subpart D of... - Categorical Exclusions Applicable to Specific Agency Actions

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Categorical Exclusions Applicable to Specific Agency Actions B Appendix B to Subpart D of Part 1021 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES Typical Classes of Actions Pt. 1021, Subpt. D, App. B Appendix B to Subpart D of Part 1021...

10 CFR Appendix B to Subpart D of... - Categorical Exclusions Applicable to Specific Agency Actions

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Categorical Exclusions Applicable to Specific Agency Actions B Appendix B to Subpart D of Part 1021 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES Typical Classes of Actions Pt. 1021, Subpt. D, App. B Appendix B to Subpart D of Part 1021...

10 CFR Appendix B to Subpart D of... - Categorical Exclusions Applicable to Specific Agency Actions

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Categorical Exclusions Applicable to Specific Agency Actions B Appendix B to Subpart D of Part 1021 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) NATIONAL ENVIRONMENTAL POLICY ACT IMPLEMENTING PROCEDURES Typical Classes of Actions Pt. 1021, Subpt. D, App. B Appendix B to Subpart D of Part 1021...

18 CFR 401.39 - Form of submission of projects not requiring prior approval by State or Federal agencies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... applicable; (2) General map showing specific location and dimension of a structural project, or specific...-structural project; (5) Written report of the applicant's engineer showing the proposed plan of operation of a structural project; (6) Map of any lands to be acquired or occupied; (7) Estimate of the cost of...

Ninth NASTRAN (R) Users' Colloquium

NASA Technical Reports Server (NTRS)

1980-01-01

The general application of finite element methodology and the specific application of NASTRAN to a wide variety of static and dynamic structural problems is addressed. Comparison with other approaches and new methods of analysis with nastran are included.

10 CFR 76.23 - Specific exemptions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Specific exemptions. 76.23 Section 76.23 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS General Provisions § 76.23 Specific exemptions. The Commission may, upon its own initiative or upon application of the Corporation...

10 CFR 76.23 - Specific exemptions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Specific exemptions. 76.23 Section 76.23 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS General Provisions § 76.23 Specific exemptions. The Commission may, upon its own initiative or upon application of the Corporation...

10 CFR 76.23 - Specific exemptions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Specific exemptions. 76.23 Section 76.23 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS General Provisions § 76.23 Specific exemptions. The Commission may, upon its own initiative or upon application of the Corporation...

10 CFR 76.23 - Specific exemptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Specific exemptions. 76.23 Section 76.23 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS General Provisions § 76.23 Specific exemptions. The Commission may, upon its own initiative or upon application of the Corporation...

10 CFR 76.23 - Specific exemptions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Specific exemptions. 76.23 Section 76.23 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS General Provisions § 76.23 Specific exemptions. The Commission may, upon its own initiative or upon application of the Corporation...

Preliminary vibration, acoustic, and shock design and test criteria for components on the Lightweight External Tank (LWT)

NASA Technical Reports Server (NTRS)

1981-01-01

The Space Shuttle LWT is divided into zones and subzones. Zones are designated primarily to assist in determining the applicable specifications. A subzone (general Specification) is available for use when the location of the component is known but component design and weight are not well defined. When the location, weight, and mounting configuration of the component are known, specifications for appropriate subzone weight ranges are available. Along with the specifications are vibration, acoustic, shock, transportation, handling, and acceptance test requirements and procedures. A method of selecting applicable vibration, acoustic, and shock specifications is presented.

From General Game Descriptions to a Market Specification Language for General Trading Agents

NASA Astrophysics Data System (ADS)

Thielscher, Michael; Zhang, Dongmo

The idea behind General Game Playing is to build systems that, instead of being programmed for one specific task, are intelligent and flexible enough to negotiate an unknown environment solely on the basis of the rules which govern it. In this paper, we argue that this principle has the great potential to bring to a new level artificially intelligent systems in other application areas as well. Our specific interest lies in General Trading Agents, which are able to understand the rules of unknown markets and then to actively participate in them without human intervention. To this end, we extend the general Game Description Language into a language that allows to formally describe arbitrary markets in such a way that these specifications can be automatically processed by a computer. We present both syntax and a transition-based semantics for this Market Specification Language and illustrate its expressive power by presenting axiomatizations of several well-known auction types.

The Role of the Programmable Calculator in the Medical Environment

PubMed Central

Winner, P.; Moller, J.

1981-01-01

A general approach to the establishment of programmable calculators as tools in health care is presented. We will discuss capabilities, applicability, disadvantages and future trends. Also the specific applicability to Creatinine Clearance programs is given

40 CFR 211.101 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... regulation, unless they are made inapplicable by product-specific regulations. ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING General Provisions § 211.101 Applicability. The provisions of subpart A apply to all products for...

CRISPR-Cas in Medicinal Chemistry: Applications and Regulatory Concerns.

PubMed

Duardo-Sanchez, Aliuska

2017-01-01

A rapid search in scientific publication's databases shows how the use of CRISPR-Cas genome editions' technique has considerably expanded, and its growing importance, in modern molecular biology. Just in pub-med platform, the search of the term gives more than 3000 results. Specifically, in Drug Discovery, Medicinal Chemistry and Chemical Biology in general CRISPR method may have multiple applications. Some of these applications are: resistance-selection studies of antimalarial lead organic compounds; investigation of druggability; development of animal models for chemical compounds testing, etc. In this paper, we offer a review of the most relevant scientific literature illustrated with specific examples of application of CRISPR technique to medicinal chemistry and chemical biology. We also present a general overview of the main legal and ethical trends regarding this method of genome editing. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

49 CFR 179.100 - General specifications applicable to pressure tank car tanks.

Code of Federal Regulations, 2014 CFR

2014-10-01

... car tanks. 179.100 Section 179.100 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120...

49 CFR 179.300 - General specifications applicable to multi-unit tank car tanks designed to be removed from car...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 110AW). 179.300 Section 179.300 Transportation Other Regulations Relating to Transportation PIPELINE AND... SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.300...

Architecture of autonomous systems

NASA Technical Reports Server (NTRS)

Dikshit, Piyush; Guimaraes, Katia; Ramamurthy, Maya; Agrawala, Ashok; Larsen, Ronald L.

1986-01-01

Automation of Space Station functions and activities, particularly those involving robotic capabilities with interactive or supervisory human control, is a complex, multi-disciplinary systems design problem. A wide variety of applications using autonomous control can be found in the literature, but none of them seem to address the problem in general. All of them are designed with a specific application in mind. In this report, an abstract model is described which unifies the key concepts underlying the design of automated systems such as those studied by the aerospace contractors. The model has been kept as general as possible. The attempt is to capture all the key components of autonomous systems. With a little effort, it should be possible to map the functions of any specific autonomous system application to the model presented here.

Architecture of autonomous systems

NASA Technical Reports Server (NTRS)

Dikshit, Piyush; Guimaraes, Katia; Ramamurthy, Maya; Agrawala, Ashok; Larsen, Ronald L.

1989-01-01

Automation of Space Station functions and activities, particularly those involving robotic capabilities with interactive or supervisory human control, is a complex, multi-disciplinary systems design problem. A wide variety of applications using autonomous control can be found in the literature, but none of them seem to address the problem in general. All of them are designed with a specific application in mind. In this report, an abstract model is described which unifies the key concepts underlying the design of automated systems such as those studied by the aerospace contractors. The model has been kept as general as possible. The attempt is to capture all the key components of autonomous systems. With a little effort, it should be possible to map the functions of any specific autonomous system application to the model presented here.

46 CFR 15.801 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Computations § 15.801 General. The OCMI will determine the specific manning levels for vessels required to have... properly manning vessels in accordance with the applicable laws, regulations, and international conventions...

46 CFR 15.801 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Computations § 15.801 General. The OCMI will determine the specific manning levels for vessels required to have... properly manning vessels in accordance with the applicable laws, regulations, and international conventions...

46 CFR 15.801 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Computations § 15.801 General. The OCMI will determine the specific manning levels for vessels required to have... properly manning vessels in accordance with the applicable laws, regulations, and international conventions...

46 CFR 15.801 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Computations § 15.801 General. The OCMI will determine the specific manning levels for vessels required to have... properly manning vessels in accordance with the applicable laws, regulations, and international conventions...

46 CFR 15.801 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Computations § 15.801 General. The OCMI will determine the specific manning levels for vessels required to have... properly manning vessels in accordance with the applicable laws, regulations, and international conventions...

Meta-tools for software development and knowledge acquisition

NASA Technical Reports Server (NTRS)

Eriksson, Henrik; Musen, Mark A.

1992-01-01

The effectiveness of tools that provide support for software development is highly dependent on the match between the tools and their task. Knowledge-acquisition (KA) tools constitute a class of development tools targeted at knowledge-based systems. Generally, KA tools that are custom-tailored for particular application domains are more effective than are general KA tools that cover a large class of domains. The high cost of custom-tailoring KA tools manually has encouraged researchers to develop meta-tools for KA tools. Current research issues in meta-tools for knowledge acquisition are the specification styles, or meta-views, for target KA tools used, and the relationships between the specification entered in the meta-tool and other specifications for the target program under development. We examine different types of meta-views and meta-tools. Our current project is to provide meta-tools that produce KA tools from multiple specification sources--for instance, from a task analysis of the target application.

Application of a Micro Computer-Based Management Information System to Improve the USAF Service Reporting Process

DTIC Science & Technology

1990-09-01

I. Introduction .......................................... 1 General Issue .................................. 1 Specific Research Problem...viii APPLICATION OF A MICRO COMPUTER-BASED MANAGEMENT INFORMATION SYSTEM TO IMPROVE THE USAF SERVICE REPORTING PROCESS I. Introduction General Issue...continued Transfer MIP Responsibility ,KNT WETSS0GEFORM UNCLASSIFIED 904 JAUG 19: iRR iRRl UUUUI HOWE271652_ D- FF:MCH INFO: NONE E. iUCH DATA DEF: NONE F

49 CFR 179.200 - General specifications applicable to non-pressure tank car tanks (Class DOT-111).

Code of Federal Regulations, 2010 CFR

2010-10-01

... tank car tanks (Class DOT-111). 179.200 Section 179.200 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes...

49 CFR 179.200 - General specifications applicable to non-pressure tank car tanks (Class DOT-111).

Code of Federal Regulations, 2013 CFR

2013-10-01

... tank car tanks (Class DOT-111). 179.200 Section 179.200 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW...

49 CFR 179.200 - General specifications applicable to non-pressure tank car tanks (Class DOT-111).

Code of Federal Regulations, 2014 CFR

2014-10-01

... tank car tanks (Class DOT-111). 179.200 Section 179.200 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW...

46 CFR 76.01-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false General. 76.01-1 Section 76.01-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Application § 76.01-1 General. (a) The provisions of this part shall apply to all vessels except as specifically noted in this...

Outer planet entry probe system study. Volume 1: Summary

NASA Technical Reports Server (NTRS)

1972-01-01

General mission considerations and science prospectus, which are of a general nature that applies to several or all planetary applications, are presented. Five probe systems are defined: nominal Jupiter probe system, and Jupiter probe-dedicated alternative probe system, Jupiter spacecraft radiation-compatible alternative probe system, Saturn probe system, and Saturn probe applicability for Uranus. Parametric analysis is summarized for mission analysis of a general nature, and then for specific missions to Jupiter, Saturn, Uranus, and Neptune. The program is also discussed from the hardware availability viewpoint and the aspect of commonality.

Fourteenth NASTRAN (R) Users' Colloquium

NASA Technical Reports Server (NTRS)

1986-01-01

The proceedings of a colloquium are presented along with technical papers contributed during the conference. Reviewed are general applications of finite element methodology and the specific application of the NASA Structural Analysis System, NASTRAN, to a variety of static and dynamic sturctural problems.

Thermophysical Properties of 60-NITINOL for Mechanical Component Applications

NASA Technical Reports Server (NTRS)

Stanford, Malcolm K.

2012-01-01

The linear thermal expansion coefficient, specific heat capacity, electrical resistivity and thermal conductivity of 60- NITINOL were studied over a range of temperatures representing the operating environment of an oil-lubricated bearing. The behavior of this material appears to follow wellestablished theories applicable to either metal alloys, in general, or to intermetallic compounds, more specifically and the measured data were found to be comparable to those for conventional bearing alloys.

Advanced Spectral Modeling Development

DTIC Science & Technology

1992-09-14

above, the AFGL line-by-line code already possesses many of the attributes desired of a generally applicable transmittance/radiance simulation code, it...transmittance calculations, (b) perform generalized multiple scattering calculations, (c) calculate both heating and dissociative fluxes, (d) provide...This report is subdivided into task specific subsections. The following section describes our general approach to address these technical issues (Section

Musite, a tool for global prediction of general and kinase-specific phosphorylation sites.

PubMed

Gao, Jianjiong; Thelen, Jay J; Dunker, A Keith; Xu, Dong

2010-12-01

Reversible protein phosphorylation is one of the most pervasive post-translational modifications, regulating diverse cellular processes in various organisms. High throughput experimental studies using mass spectrometry have identified many phosphorylation sites, primarily from eukaryotes. However, the vast majority of phosphorylation sites remain undiscovered, even in well studied systems. Because mass spectrometry-based experimental approaches for identifying phosphorylation events are costly, time-consuming, and biased toward abundant proteins and proteotypic peptides, in silico prediction of phosphorylation sites is potentially a useful alternative strategy for whole proteome annotation. Because of various limitations, current phosphorylation site prediction tools were not well designed for comprehensive assessment of proteomes. Here, we present a novel software tool, Musite, specifically designed for large scale predictions of both general and kinase-specific phosphorylation sites. We collected phosphoproteomics data in multiple organisms from several reliable sources and used them to train prediction models by a comprehensive machine-learning approach that integrates local sequence similarities to known phosphorylation sites, protein disorder scores, and amino acid frequencies. Application of Musite on several proteomes yielded tens of thousands of phosphorylation site predictions at a high stringency level. Cross-validation tests show that Musite achieves some improvement over existing tools in predicting general phosphorylation sites, and it is at least comparable with those for predicting kinase-specific phosphorylation sites. In Musite V1.0, we have trained general prediction models for six organisms and kinase-specific prediction models for 13 kinases or kinase families. Although the current pretrained models were not correlated with any particular cellular conditions, Musite provides a unique functionality for training customized prediction models (including condition-specific models) from users' own data. In addition, with its easily extensible open source application programming interface, Musite is aimed at being an open platform for community-based development of machine learning-based phosphorylation site prediction applications. Musite is available at http://musite.sourceforge.net/.

Geologic and geophysical maps of the El Casco 7.5′ quadrangle, Riverside County, southern California, with accompanying geologic-map database

USGS Publications Warehouse

Matti, J.C.; Morton, D.M.; Langenheim, V.E.

2015-01-01

Geologic information contained in the El Casco database is general-purpose data applicable to land-related investigations in the earth and biological sciences. The term “general-purpose” means that all geologic-feature classes have minimal information content adequate to characterize their general geologic characteristics and to interpret their general geologic history. However, no single feature class has enough information to definitively characterize its properties and origin. For this reason the database cannot be used for site-specific geologic evaluations, although it can be used to plan and guide investigations at the site-specific level.

Library-Specific Microcomputer Software.

ERIC Educational Resources Information Center

Levert, Virginia M.

1985-01-01

Discusses number and type of microcomputer software programs useful to libraries and types of hardware on which they run, as identified by Nolan Information Management Services. Highlights include general application programs, applications designed to support library technical processes, producers of library software, and choosing among options.…

Information Practices and User Interfaces: Student Use of an iOS Application in Special Education

ERIC Educational Resources Information Center

Demmans Epp, Carrie; McEwen, Rhonda; Campigotto, Rachelle; Moffatt, Karyn

2016-01-01

A framework connecting concepts from user interface design with those from information studies is applied in a study that integrated a location-aware mobile application into two special education classes at different schools; this application had two support modes (one general and one location specific). The five-month study revealed several…

SPIRAL-SPRITE: a rapid single point MRI technique for application to porous media.

PubMed

Szomolanyi, P; Goodyear, D; Balcom, B; Matheson, D

2001-01-01

This study presents the application of a new, rapid, single point MRI technique which samples k space with spiral trajectories. The general principles of the technique are outlined along with application to porous concrete samples, solid pharmaceutical tablets and gas phase imaging. Each sample was chosen to highlight specific features of the method.

Authentic Assessment in Physical Education: A Case Study of Game Sense Pedagogy

ERIC Educational Resources Information Center

Georgakis, Steve; Wilson, Rachel; Evans, John Robert

2015-01-01

The use and promotion of the term authentic assessment (AA) in the literature and among physical education (PE) practitioners is widespread. However, the meaning and application of this concept are misunderstood, in education generally, in its application to PE, and in its application to specific pedagogical approaches within PE, such as Game…

7 CFR 2502.1 - Applicability of regulations.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF AGRICULTURE AGRICULTURAL CAREER AND EMPLOYMENT (ACE) GRANTS PROGRAM General Information § 2502.1 Applicability of regulations. (a) This part contains program-specific definitions for the ACE Grants Program. (b) Subpart B establishes the criteria to be used in determining eligibility for an ACE...

7 CFR 2502.1 - Applicability of regulations.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., DEPARTMENT OF AGRICULTURE AGRICULTURAL CAREER AND EMPLOYMENT (ACE) GRANTS PROGRAM General Information § 2502.1 Applicability of regulations. (a) This part contains program-specific definitions for the ACE Grants Program. (b) Subpart B establishes the criteria to be used in determining eligibility for an ACE...

7 CFR 2502.1 - Applicability of regulations.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF AGRICULTURE AGRICULTURAL CAREER AND EMPLOYMENT (ACE) GRANTS PROGRAM General Information § 2502.1 Applicability of regulations. (a) This part contains program-specific definitions for the ACE Grants Program. (b) Subpart B establishes the criteria to be used in determining eligibility for an ACE...

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT VII, AUTOMATIC TRANSMISSIONS--ALLISON, TORQUMATIC SERIES 5960 AND 6060 (PART I).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF SPECIFIC MODELS OF AUTOMATIC TRANSMISSIONS USED ON DIESEL POWERED VEHICLES. TOPICS ARE (1) GENERAL SPECIFICATION DATA, (2) OPTIONS FOR VARIOUS APPLICATIONS, (3) ROAD TEST INSTRUCTIONS, (4) IDENTIFICATION AND SPECIFICATION DATA, (5) ALLISON…

49 CFR 179.220 - General specifications applicable to nonpressure tank car tanks consisting of an inner container...

Code of Federal Regulations, 2012 CFR

2012-10-01

... tank car tanks consisting of an inner container supported within an outer shell (class DOT-115). 179... AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.220...

Electronic Noses for Environmental Monitoring Applications

PubMed Central

Capelli, Laura; Sironi, Selena; Rosso, Renato Del

2014-01-01

Electronic nose applications in environmental monitoring are nowadays of great interest, because of the instruments' proven capability of recognizing and discriminating between a variety of different gases and odors using just a small number of sensors. Such applications in the environmental field include analysis of parameters relating to environmental quality, process control, and verification of efficiency of odor control systems. This article reviews the findings of recent scientific studies in this field, with particular focus on the abovementioned applications. In general, these studies prove that electronic noses are mostly suitable for the different applications reported, especially if the instruments are specifically developed and fine-tuned. As a general rule, literature studies also discuss the critical aspects connected with the different possible uses, as well as research regarding the development of effective solutions. However, currently the main limit to the diffusion of electronic noses as environmental monitoring tools is their complexity and the lack of specific regulation for their standardization, as their use entails a large number of degrees of freedom, regarding for instance the training and the data processing procedures. PMID:25347583

9 CFR 50.2 - Applicability of this subpart; cooperation with States.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ANIMALS DESTROYED BECAUSE OF TUBERCULOSIS General Indemnity § 50.2 Applicability of this subpart... the destruction of animals because of tuberculosis, except as specifically provided in subpart B of... tuberculosis and pays Federal indemnities for the destruction of cattle, bison, captive cervids, or swine...

37 CFR 1.76 - Application data sheet.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 37 Patents, Trademarks, and Copyrights 1 2014-07-01 2014-07-01 false Application data sheet. 1.76 Section 1.76 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions Specification § 1.76...

Iowa Supplement...For Commercial Applicators. IC-427.

ERIC Educational Resources Information Center

Iowa State Univ. of Science and Technology, Ames. Cooperative Extension Service.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The text outlines the procedures to be followed for certification. Additionally, a general overview of important data such as toxicity of pesticides, poison control centers, record keeping, equipment maintenance and liability is…

9 CFR 50.2 - Applicability of this subpart; cooperation with States.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ANIMALS DESTROYED BECAUSE OF TUBERCULOSIS General Indemnity § 50.2 Applicability of this subpart... the destruction of animals because of tuberculosis, except as specifically provided in subpart B of... tuberculosis and pays Federal indemnities for the destruction of cattle, bison, captive cervids, or swine...

9 CFR 50.2 - Applicability of this subpart; cooperation with States.

Code of Federal Regulations, 2013 CFR

2013-01-01

... ANIMALS DESTROYED BECAUSE OF TUBERCULOSIS General Indemnity § 50.2 Applicability of this subpart... the destruction of animals because of tuberculosis, except as specifically provided in subpart B of... tuberculosis and pays Federal indemnities for the destruction of cattle, bison, captive cervids, or swine...

9 CFR 50.2 - Applicability of this subpart; cooperation with States.

Code of Federal Regulations, 2014 CFR

2014-01-01

... ANIMALS DESTROYED BECAUSE OF TUBERCULOSIS General Indemnity § 50.2 Applicability of this subpart... the destruction of animals because of tuberculosis, except as specifically provided in subpart B of... tuberculosis and pays Federal indemnities for the destruction of cattle, bison, captive cervids, or swine...

9 CFR 50.2 - Applicability of this subpart; cooperation with States.

Code of Federal Regulations, 2012 CFR

2012-01-01

... ANIMALS DESTROYED BECAUSE OF TUBERCULOSIS General Indemnity § 50.2 Applicability of this subpart... the destruction of animals because of tuberculosis, except as specifically provided in subpart B of... tuberculosis and pays Federal indemnities for the destruction of cattle, bison, captive cervids, or swine...

24 CFR 5.2005 - VAWA protections.

Code of Federal Regulations, 2011 CFR

2011-04-01

... GENERAL HUD PROGRAM REQUIREMENTS; WAIVERS Protection for Victims of Domestic Violence, Dating Violence, or... applicable, must include a description of specific protections afforded to the victims of domestic violence... not be denied on the basis that the applicant is or has been a victim of domestic violence, dating...

47 CFR 1.720 - General pleading requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., Applications, Tariffs, and Reports Involving Common Carriers Formal Complaints § 1.720 General pleading... rendered on the merits of the complaint. (h) Specific reference shall be made to any tariff provision relied on in support of a claim or defense. Copies of relevant tariffs or relevant portions of tariffs...

14 CFR 302.11 - Motions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Motions. 302.11 Section 302.11 Aeronautics... REGULATIONS RULES OF PRACTICE IN PROCEEDINGS Rules of General Applicability § 302.11 Motions. (a) Generally... otherwise specifically provided for in this part shall be by motion. If an administrative law judge is...

14 CFR 302.11 - Motions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Motions. 302.11 Section 302.11 Aeronautics... REGULATIONS RULES OF PRACTICE IN PROCEEDINGS Rules of General Applicability § 302.11 Motions. (a) Generally... otherwise specifically provided for in this part shall be by motion. If an administrative law judge is...

Safety Guide for Health Occupations Programs.

ERIC Educational Resources Information Center

Illinois State Board of Vocational Education and Rehabilitation, Springfield. Div. of Vocational and Technical Education.

The handbook is intended to be utilized by health occupations teachers as supplementary instructional materials for a unit on safety. The document contains general safety rules applicable to hospitals and other health care institutions. Outlined are general rules for fire safety and office and clerical safety and more specific rules for the…

The 120V 20A PWM switch for applications in high power distribution

NASA Astrophysics Data System (ADS)

Borelli, V.; Nimal, W.

1989-08-01

A 20A/120VDC (voltage direct current) PWM (Pulse Width Modulation) Solid State Power Controller (SSPC) developed under ESA contract to be used in the power distribution system of Columbus is described. The general characteristics are discussed and the project specification defined. The benefits of a PWM solution over a more conventional approach, for the specific application considered are presented. An introduction to the SSPC characteristics and a functional description are presented.

mREST Interface Specification

NASA Technical Reports Server (NTRS)

McCartney, Patrick; MacLean, John

2012-01-01

mREST is an implementation of the REST architecture specific to the management and sharing of data in a system of logical elements. The purpose of this document is to clearly define the mREST interface protocol. The interface protocol covers all of the interaction between mREST clients and mREST servers. System-level requirements are not specifically addressed. In an mREST system, there are typically some backend interfaces between a Logical System Element (LSE) and the associated hardware/software system. For example, a network camera LSE would have a backend interface to the camera itself. These interfaces are specific to each type of LSE and are not covered in this document. There are also frontend interfaces that may exist in certain mREST manager applications. For example, an electronic procedure execution application may have a specialized interface for configuring the procedures. This interface would be application specific and outside of this document scope. mREST is intended to be a generic protocol which can be used in a wide variety of applications. A few scenarios are discussed to provide additional clarity but, in general, application-specific implementations of mREST are not specifically addressed. In short, this document is intended to provide all of the information necessary for an application developer to create mREST interface agents. This includes both mREST clients (mREST manager applications) and mREST servers (logical system elements, or LSEs).

Iowa Commercial Pesticide Applicator Manual, Category 7A: General and Household Pest Control. CS-19. Category 7B: Termite Control, CS-20. Category 7C: Food Industry Pest Control, CS-21. Category 7D: Community Insect Control, CS-22.

ERIC Educational Resources Information Center

Stockdale, Harold J., Ed.; And Others

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The first section discusses general and household pest control and is concerned with parasitic pests and man, stored product pests, and irritating vertebrates. Section two is devoted to identifying and controlling structural pests such…

10 CFR 52.0 - Scope; applicability of 10 CFR Chapter I provisions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Scope; applicability of 10 CFR Chapter I provisions. 52.0... NUCLEAR POWER PLANTS General Provisions § 52.0 Scope; applicability of 10 CFR Chapter I provisions. (a... provisions in 10 CFR 52.4. (b) Unless otherwise specifically provided for in this part, the regulations in 10...

Methods to estimate total forest biomass for extensive forest inventories: applications in the northeastern U.S.

Treesearch

Eric H. Wharton; Douglas M. Griffith

1993-01-01

Presents methods for synthesizing information from existing biomass literature when making biomass assessments over extensive geographic areas, such as for a state or region. Described are general applications to the northeastern United States, and specific applications to Ohio. Tables of appropriate regression equations and the tree and shrub species to which these...

Perfection and complexity in the lower Brazos River

NASA Astrophysics Data System (ADS)

Phillips, Jonathan D.

2007-11-01

The "perfect landscape" concept is based on the notion that any specific geomorphic system represents the combined, interacting effects of a set of generally applicable global laws and a set of geographically and historically contingent local controls. Because the joint probability of any specific combination of local and global controls is low, and the local controls are inherently idiosyncratic, the probability of existence of any given landscape is vanishingly small. A perfect landscape approach to geomorphic complexity views landscapes as circumstantial, contingent outcomes of deterministic laws operating in a specific environmental and historical context. Thus, explaining evolution of complex landscapes requires the integration of global and local approaches. Because perfection in this sense is the most important and pervasive form of complexity, the study of geomorphic complexity is not restricted to nonlinear dynamics, self-organization, or any other aspects of complexity theory. Beyond what can be achieved via complexity theory, the details of historical and geographic contexts must be addressed. One way to approach this is via synoptic analyses, where the relevant global laws are applied in specific situational contexts. A study of non-acute tributary junctions in the lower Brazos River, Texas illustrates this strategy. The application of generalizations about tributary junction angles, and of relevant theories, does not explain the unexpectedly high occurrence or the specific instances of barbed or straight junctions in the study area. At least five different causes for the development of straight or obtuse junction angles are evident in the lower Brazos. The dominant mechanism, however, is associated with river bank erosion and lateral channel migration which encroaches on upstream-oriented reaches of meandering tributaries. Because the tributaries are generally strongly incised in response to Holocene incision of the Brazos, the junctions are not readily reoriented to the expected acute angle. The findings are interpreted in the context of nonlinear divergent evolution, geographical and historical contingency, synoptic frameworks for generalizing results, and applicability of the dominant processes concept in geomorphology.

18 CFR 157.6 - Applications; general requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... provide the title of the pamphlet and indicate its availability at the Commission's Internet address; (iii... applicant, including a local or toll-free phone number and a name of a specific person to contact who is... the Commission's Internet address and the telephone number for the Commission's Office of External...

18 CFR 157.6 - Applications; general requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... provide the title of the pamphlet and indicate its availability at the Commission's Internet address; (iii... applicant, including a local or toll-free phone number and a name of a specific person to contact who is... the Commission's Internet address and the telephone number for the Commission's Office of External...

18 CFR 157.6 - Applications; general requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... provide the title of the pamphlet and indicate its availability at the Commission's Internet address; (iii... applicant, including a local or toll-free phone number and a name of a specific person to contact who is... the Commission's Internet address and the telephone number for the Commission's Office of External...

18 CFR 157.6 - Applications; general requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... provide the title of the pamphlet and indicate its availability at the Commission's Internet address; (iii... applicant, including a local or toll-free phone number and a name of a specific person to contact who is... the Commission's Internet address and the telephone number for the Commission's Office of External...

15 CFR 971.202 - Statement of technological experience and capabilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) General. The application must contain information sufficient to demonstrate to the Administrator pursuant... program set out in the applicant's commercial recovery plan. (b) Specific. In particular, the information... possesses, or to which it can demonstrate access [see § 971.200(e)]. The information must include: (1) A...

15 CFR 971.202 - Statement of technological experience and capabilities.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) General. The application must contain information sufficient to demonstrate to the Administrator pursuant... program set out in the applicant's commercial recovery plan. (b) Specific. In particular, the information... possesses, or to which it can demonstrate access [see § 971.200(e)]. The information must include: (1) A...

Sixteenth NASTRAN (R) Users' Colloquium

NASA Technical Reports Server (NTRS)

1988-01-01

These are the proceedings of the Sixteenth NASTRAN Users' Colloquium held in Arlington, Virginia from 25 to 29 April, 1988. Technical papers contributed by participants review general application of finite element methodology and the specific application of the NASA Structural Analysis System (NASTRAN) to a variety of static and dynamic structural problems.

21 CFR 312.47 - Meetings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... resources permit. The general principle underlying the conduct of such meetings is that there should be free...) “End-of-Phase 2” meetings and meetings held before submission of a marketing application. At specific... meetings held near completion of Phase 3 and before submission of a marketing application (“pre-NDA...

Infrastructure for Rapid Development of Java GUI Programs

NASA Technical Reports Server (NTRS)

Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

2006-01-01

The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

49 CFR 179.300 - General specifications applicable to multi-unit tank car tanks designed to be removed from car...

Code of Federal Regulations, 2012 CFR

2012-10-01

... tank car tanks designed to be removed from car structure for filling and emptying (Classes DOT-106A and...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.300...

49 CFR 179.300 - General specifications applicable to multi-unit tank car tanks designed to be removed from car...

Code of Federal Regulations, 2011 CFR

2011-10-01

... tank car tanks designed to be removed from car structure for filling and emptying (Classes DOT-106A and...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW) § 179.300...

24 CFR 35.105 - Effective dates.

Code of Federal Regulations, 2010 CFR

2010-04-01

... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint... further information on the application of the effective date to specific programs. Before September 15...

43 CFR 419.3 - What general principles govern implementation of the TROA?

Code of Federal Regulations, 2010 CFR

2010-10-01

... conflict with those specific provisions, the specific TROA provisions control. Operations should meet all... reservoir recreation levels as described in Article Nine of the TROA. (d) Comply with applicable flood control requirements for Prosser Creek, Stampede, Boca, and Martis Creek Reservoirs. (e) Comply with all...

Single-Stranded DNA Aptamers against Pathogens and Toxins: Identification and Biosensing Applications

PubMed Central

Hong, Ka Lok

2015-01-01

Molecular recognition elements (MREs) can be short sequences of single-stranded DNA, RNA, small peptides, or antibody fragments. They can bind to user-defined targets with high affinity and specificity. There has been an increasing interest in the identification and application of nucleic acid molecular recognition elements, commonly known as aptamers, since they were first described in 1990 by the Gold and Szostak laboratories. A large number of target specific nucleic acids MREs and their applications are currently in the literature. This review first describes the general methodologies used in identifying single-stranded DNA (ssDNA) aptamers. It then summarizes advancements in the identification and biosensing application of ssDNA aptamers specific for bacteria, viruses, their associated molecules, and selected chemical toxins. Lastly, an overview of the basic principles of ssDNA aptamer-based biosensors is discussed. PMID:26199940

24 CFR 570.400 - General.

Code of Federal Regulations, 2013 CFR

2013-04-01

... this subpart, except to the extent that they are specifically modified or augmented by the contents of... for discretionary assistance—(1) Review components. An application for assistance under this subpart...

24 CFR 570.400 - General.

Code of Federal Regulations, 2014 CFR

2014-04-01

... this subpart, except to the extent that they are specifically modified or augmented by the contents of... for discretionary assistance—(1) Review components. An application for assistance under this subpart...

24 CFR 570.400 - General.

Code of Federal Regulations, 2012 CFR

2012-04-01

... this subpart, except to the extent that they are specifically modified or augmented by the contents of... for discretionary assistance—(1) Review components. An application for assistance under this subpart...

Differences in perceptual learning transfer as a function of training task.

PubMed

Green, C Shawn; Kattner, Florian; Siegel, Max H; Kersten, Daniel; Schrater, Paul R

2015-01-01

A growing body of research--including results from behavioral psychology, human structural and functional imaging, single-cell recordings in nonhuman primates, and computational modeling--suggests that perceptual learning effects are best understood as a change in the ability of higher-level integration or association areas to read out sensory information in the service of particular decisions. Work in this vein has argued that, depending on the training experience, the "rules" for this read-out can either be applicable to new contexts (thus engendering learning generalization) or can apply only to the exact training context (thus resulting in learning specificity). Here we contrast learning tasks designed to promote either stimulus-specific or stimulus-general rules. Specifically, we compare learning transfer across visual orientation following training on three different tasks: an orientation categorization task (which permits an orientation-specific learning solution), an orientation estimation task (which requires an orientation-general learning solution), and an orientation categorization task in which the relevant category boundary shifts on every trial (which lies somewhere between the two tasks above). While the simple orientation-categorization training task resulted in orientation-specific learning, the estimation and moving categorization tasks resulted in significant orientation learning generalization. The general framework tested here--that task specificity or generality can be predicted via an examination of the optimal learning solution--may be useful in building future training paradigms with certain desired outcomes.

Connector interchangeability

NASA Technical Reports Server (NTRS)

Berilla, T.

1972-01-01

The application is discussed of the general rules of ANSI Y14.5 in designing connectors for interchangeability, and lowering costs. The general rules are applied to actural connector designs, and existing specifications are identified that (1) reject better quality products than those accepted, (2) accept products which should be rejected, and (3) impose unnecessary, nonfunctional costly requirements.

10 CFR 32.71 - Manufacture and distribution of byproduct material for certain in vitro clinical or laboratory...

Code of Federal Regulations, 2010 CFR

2010-01-01

... certain in vitro clinical or laboratory testing under general license. 32.71 Section 32.71 Energy NUCLEAR... certain in vitro clinical or laboratory testing under general license. An application for a specific... only by physicians, veterinarians in the practice of veterinary medicine, clinical laboratories or...

A Visual Programming Methodology for Tactical Aircrew Scheduling and Other Applications

DTIC Science & Technology

1991-12-01

prgramming methodology and environment of a user-specific application remains with and is delivered as part of the application, then there is another factor...animation is useful, not only for scheduling applications, but as a general prgramming methodology. Of course, there are a number of improvements...possible using Excel because there is nothing to prevent access to cells. However, it is easy to imagine a spreadsheet which can support the

Design guidelines for use of adhesives in hybrid microcircuits. [for electronic equipment in space applications

NASA Technical Reports Server (NTRS)

Caruso, S. V.; Perkins, K. L.; Licari, J. J.

1973-01-01

Although it is generally accepted that the use of adhesives in the assembly of hybrid microcircuits offers advantages over other bonding methods, there currently does not exist a set of guidelines for the selection of adhesives which will insure that hybrid microcircuits assembled with them will meet the long use-life, high-reliability requirements of electronic equipment for space applications. This study was directed to the identification of the properties of electrically insulative adhesives that potentially could cause problems in such an application, and to the development of evaluation tests to quantify these properties and thus form the basis for establishing suitable guidelines and, ultimately, specifications. Bond strength, outgassing after cure, and corrosivity were selected for detailed attention since they are considered to be especially critical. Introductory discussion includes enumeration and brief comments on the properties of adhesives considered to be important for the proposed application, a general review of polymeric types of adhesives, and identification of the major types of adhesives commercially available and specifically designed for microelectronic use. The specific tests developed to evaluate bond strength, outgassing after cure, and corrosivity are discussed in detail, and comparative results obtained for selected adhesives representative of the major types are given.

Quality Control Analysis of Selected Aspects of Programs Administered by the Bureau of Student Financial Assistance. Task 1 and Quality Control Sample; Error-Prone Modeling Analysis Plan.

ERIC Educational Resources Information Center

Saavedra, Pedro; And Others

Parameters and procedures for developing an error-prone model (EPM) to predict financial aid applicants who are likely to misreport on Basic Educational Opportunity Grant (BEOG) applications are introduced. Specifications to adapt these general parameters to secondary data analysis of the Validation, Edits, and Applications Processing Systems…

75 FR 3735 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-22

... Request; Medicated Feed Mill License Application AGENCY: Food and Drug Administration, HHS. ACTION: Notice... collection of information to OMB for review and clearance. Medicated Feed Mill License Application--(OMB... for the approval of specific medicated feed with a general licensing system for feed mills. Before...

10 CFR 30.33 - General requirements for issuance of specific licenses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and minimize danger to life or property; (3) The applicant is qualified by training and experience to... life or property; (4) The applicant satisfies any special requirements contained in parts 32 through 36... for the conduct of any activity which the NRC determines will significantly affect the quality of the...

40 CFR 152.99 - Petitions to cancel registration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... purportedly has failed to satisfy. (a) Grounds for petition. (1) If an applicant has offered to pay compensation to an original data submitter of a study (either specifically or by filing a general offer to pay... decision, and describe how the applicant has failed to comply with the decision. (2) When no offer to pay...

17 CFR 12.308 - Motions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Motions. 12.308 Section 12.308... Applicable to Formal Decisional Proceedings § 12.308 Motions. (a) In general. An application for a form of relief not otherwise specifically provided for in this subpart E shall be made by a motion, which shall...

17 CFR 12.308 - Motions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Motions. 12.308 Section 12.308... Applicable to Formal Decisional Proceedings § 12.308 Motions. (a) In general. An application for a form of relief not otherwise specifically provided for in this subpart E shall be made by a motion, which shall...

ASIC For Complex Fixed-Point Arithmetic

NASA Technical Reports Server (NTRS)

Petilli, Stephen G.; Grimm, Michael J.; Olson, Erlend M.

1995-01-01

Application-specific integrated circuit (ASIC) performs 24-bit, fixed-point arithmetic operations on arrays of complex-valued input data. High-performance, wide-band arithmetic logic unit (ALU) designed for use in computing fast Fourier transforms (FFTs) and for performing ditigal filtering functions. Other applications include general computations involved in analysis of spectra and digital signal processing.

A Framework for Applying History and Philosophy of Science to Science Education.

ERIC Educational Resources Information Center

Duschl, Richard A.

Interest in the application of the history and philosophy of science to science education raises important questions about the effect such considerations will have on educational practice. In this paper, the application emphasizes concepts related to theory testing and theory development specifically and to the growth of knowledge generally. This…

33 CFR 320.4 - General policies for evaluating permit applications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... specific factor may be given great weight on one proposal, while it may not be present or as important on... will ask the Governor to express his views or to designate one state agency to represent the official... are designed for safety, non-Federal applicants may be required to demonstrate that the structures...

33 CFR 320.4 - General policies for evaluating permit applications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... specific factor may be given great weight on one proposal, while it may not be present or as important on... will ask the Governor to express his views or to designate one state agency to represent the official... are designed for safety, non-Federal applicants may be required to demonstrate that the structures...

33 CFR 320.4 - General policies for evaluating permit applications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... specific factor may be given great weight on one proposal, while it may not be present or as important on... will ask the Governor to express his views or to designate one state agency to represent the official... are designed for safety, non-Federal applicants may be required to demonstrate that the structures...

Software Requirements Specification for an Ammunition Management System

DTIC Science & Technology

1986-09-01

thesis takes the form of a software requirements specification. Such a specification, according to Pressman [Ref. 7], establishes a complete...defined by Pressman , is depicted in Figure 1.1. 11 Figure 1.1 Generalized Software Life Cycle The common thread which binds the various phases together...application of software engineering principles requires an established methodology. This methodology, according to Pressman [Ref. 8:p. 151 is an

7 CFR 1437.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... value loss and other specific commodities, see the applicable subpart and section of this part. For..., as determined by CCC. Good farming practices means the cultural practices generally used for the crop...

Design and Development of "The Reading Biographer": An Application of Function Specific Assessment.

ERIC Educational Resources Information Center

Hanson, Ralph A.; Siegel, Donna Farrell

The general features of function-specific assessment are described and illustrated via a discussion of the design and development of "The Reading Biographer," an instrument for assessing experiences and activities of students (from early childhood through high school) that affect their reading achievement as high school seniors. The…

Installation and Assembly, Electrical Ground Support Equipment (GSE), Specification for

NASA Technical Reports Server (NTRS)

Denson, Erik C.

2014-01-01

This specification covers the general workmanship requirements and procedures for the complete installation and assembly of electrical ground support equipment (EGSE) such as terminal distributors, junction boxes, conduit and fittings, cable trays and accessories, interconnecting cables (including routing requirements), motor-control equipment, and necessary hardware as specified by the applicable contract and drawings.

40 CFR 53.50 - General provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the specific tests that must be carried out and the test results, evidence, documentation, and other... specifications set forth in appendix L or O, respectively, of part 50 of this chapter as well as additional requirements specified in this subpart E. Some or all of these tests may also be applicable to a candidate...

Generalized Information Architecture for Managing Requirements in IBM?s Rational DOORS(r) Application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aragon, Kathryn M.; Eaton, Shelley M.; McCornack, Marjorie Turner

When a requirements engineering effort fails to meet expectations, often times the requirements management tool is blamed. Working with numerous project teams at Sandia National Laboratories over the last fifteen years has shown us that the tool is rarely the culprit; usually it is the lack of a viable information architecture with well- designed processes to support requirements engineering. This document illustrates design concepts with rationale, as well as a proven information architecture to structure and manage information in support of requirements engineering activities for any size or type of project. This generalized information architecture is specific to IBM's Rationalmore » DOORS (Dynamic Object Oriented Requirements System) software application, which is the requirements management tool in Sandia's CEE (Common Engineering Environment). This generalized information architecture can be used as presented or as a foundation for designing a tailored information architecture for project-specific needs. It may also be tailored for another software tool. Version 1.0 4 November 201« less

Exploiting chaos for applications.

PubMed

Ditto, William L; Sinha, Sudeshna

2015-09-01

We discuss how understanding the nature of chaotic dynamics allows us to control these systems. A controlled chaotic system can then serve as a versatile pattern generator that can be used for a range of application. Specifically, we will discuss the application of controlled chaos to the design of novel computational paradigms. Thus, we present an illustrative research arc, starting with ideas of control, based on the general understanding of chaos, moving over to applications that influence the course of building better devices.

Automation of data acquisition in electron crystallography.

PubMed

Cheng, Anchi

2013-01-01

General considerations for using automation software for acquiring high-resolution images of 2D crystals under low-dose conditions are presented. Protocol modifications specific to this application in Leginon are provided.

On the estimation variance for the specific Euler-Poincaré characteristic of random networks.

PubMed

Tscheschel, A; Stoyan, D

2003-07-01

The specific Euler number is an important topological characteristic in many applications. It is considered here for the case of random networks, which may appear in microscopy either as primary objects of investigation or as secondary objects describing in an approximate way other structures such as, for example, porous media. For random networks there is a simple and natural estimator of the specific Euler number. For its estimation variance, a simple Poisson approximation is given. It is based on the general exact formula for the estimation variance. In two examples of quite different nature and topology application of the formulas is demonstrated.

Assessment of the State of the Art of Flight Control Technologies as Applicable to Adverse Conditions

NASA Technical Reports Server (NTRS)

Reveley, Mary s.; Briggs, Jeffrey L.; Leone, Karen M.; Kurtoglu, Tolga; Withrow, Colleen A.

2010-01-01

Literature from academia, industry, and other Government agencies was surveyed to assess the state of the art in current Integrated Resilient Aircraft Control (IRAC) aircraft technologies. Over 100 papers from 25 conferences from the time period 2004 to 2009 were reviewed. An assessment of the general state of the art in adaptive flight control is summarized first, followed by an assessment of the state of the art as applicable to 13 identified adverse conditions. Specific areas addressed in the general assessment include flight control when compensating for damage or reduced performance, retrofit software upgrades to flight controllers, flight control through engine response, and finally test and validation of new adaptive controllers. The state-of-the-art assessment applicable to the adverse conditions include technologies not specifically related to flight control, but may serve as inputs to a future flight control algorithm. This study illustrates existing gaps and opportunities for additional research by the NASA IRAC Project

Adding Temporal Characteristics to Geographical Schemata and Instances: A General Framework

NASA Astrophysics Data System (ADS)

Ota, Morishige

2018-05-01

This paper proposes the temporal general feature model (TGFM) as a meta-model for application schemata representing changes of real-world phenomena. It is not very easy to determine history directly from the current application schemata, even if the revision notes are attached to the specification. To solve this problem, the rules for description of the succession between previous and posterior components are added to the general feature model, thus resulting in TGFM. After discussing the concepts associated with the new model, simple examples of application schemata are presented as instances of TGFM. Descriptors for changing properties, the succession of changing properties in moving features, and the succession of features and associations are introduced. The modeling methods proposed in this paper will contribute to the acquisition of consistent and reliable temporal geospatial data.

Electronic Excitation in Molecular Collisions: Structural, Dynamic and Kinetic Considerations.

DTIC Science & Technology

1981-08-01

electronically excited species are examined. The problem is studied both in general terms (i.e., the development of the required theoretical framework ) and in application to specific systems. (Author)

Electronic Excitation in Molecular Collisions: Structural, Dynamic and Kinetic Considerations.

DTIC Science & Technology

1980-09-01

electronically excited species are examined. The problem is studied both in general terms (i.e., the development of the required theoretical framework ) and in application to specific systems. (Author)

Electronic Excitation in Molecular Collisions: Structural, Dynamic and Kinetic Considerations.

DTIC Science & Technology

1979-09-01

electronically excited species are examined. The problem is studied both in general terms (i.e., the development of the required theoretical framework ) and in application to specific systems. (Author)

Electronic Excitation in Molecular Collisions: Structural, Dynamic and Kinetic Considerations.

DTIC Science & Technology

electronically excited specied are examined. The problem is studied both in general terms (i.e., the development of the required theoretical framework ) and in application to specific systems. (Author)

17 CFR 200.13 - Executive Director.

Code of Federal Regulations, 2010 CFR

2010-04-01

... AND ETHICS; AND INFORMATION AND REQUESTS Organization and Program Management General Organization... procurement regulations, enters into contracts, designates contracting officers, and makes procurement...-specific application of performance measures, procurement reforms, personnel reductions, financial...

Remote sensing of snow and ice.

USGS Publications Warehouse

Meier, M.F.

1980-01-01

Active and passive sensors operating in the visible, near infrared, thermal infrared, and microwave wavelengths are described in regard to general applications and in regard to specific USA or USSR satellites. -from Author

26 CFR 1.663(a)-1 - Special rules applicable to sections 661 and 662; exclusions; gifts, bequests, etc.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; exclusions; gifts, bequests, etc. (a) In general. A gift or bequest of a specific sum of money or of specific property, which is required by the specific terms of the will or trust instrument and is properly paid or... trust instrument the gift or bequest is to be paid or credited to the recipient in more than three...

Protein Crystallization: Specific Phenomena and General Insights on Crystallization Kinetics

NASA Technical Reports Server (NTRS)

Rosenberger, F.

1998-01-01

Experimental and simulation studies of the nucleation and growth kinetics of proteins have revealed phenomena that are specific for macromolecular crystallization, and others that provide a more detailed understanding of solution crystallization in general. The more specific phenomena, which include metastable liquid-liquid phase separations and gelation prior to solid nucleation, are due to the small ratio of the intermolecular interaction-range to the size of molecules involved. The apparently more generally applicable mechanisms include the cascade-like formation of macrosteps, as an intrinsic morphological instability that roots in the coupled bulk transport and nonlinear interface kinetics in systems with mixed growth rate control. Analyses of this nonlinear response provide (a) criteria for the choice of bulk transport conditions to minimize structural defect formation, and (b) indications that the "slow" protein crystallization kinetics stems from the mutual retardation of growth steps.

User's manual for MMLE3, a general FORTRAN program for maximum likelihood parameter estimation

NASA Technical Reports Server (NTRS)

Maine, R. E.; Iliff, K. W.

1980-01-01

A user's manual for the FORTRAN IV computer program MMLE3 is described. It is a maximum likelihood parameter estimation program capable of handling general bilinear dynamic equations of arbitrary order with measurement noise and/or state noise (process noise). The theory and use of the program is described. The basic MMLE3 program is quite general and, therefore, applicable to a wide variety of problems. The basic program can interact with a set of user written problem specific routines to simplify the use of the program on specific systems. A set of user routines for the aircraft stability and control derivative estimation problem is provided with the program.

Cultural Viewpoint Metaphors Guiding the Collaborative Strategies Design of a Multitouch Tabletop Game for People with Autism

ERIC Educational Resources Information Center

Silva, Greis F. Mireya; Salgado, Luciana Cardoso de Castro; Suplino, Maryse; Raposo, Alberto Barbosa

2014-01-01

Collaborative multitouch applications have been designed to support social interaction and collaboration skills in people with mild autism. However, this kind of application generally is not designed specifically for people with severe autism. We have proposed a set of collaborative strategies to manipulate the elements in the interface aiming to…

77 FR 27321 - Takes of Marine Mammals Incidental to Specified Activities; Taking Marine Mammals Incidental to...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

... deemed the application complete. The September 12, 2011, application is the one available for public... and analyses that are generally not repeated in this document. Only in cases where descriptions or... does not intend to address each one specifically in the responses to comments. All of the public...

The General Concept of Benchmarking and Its Application in Higher Education in Europe

ERIC Educational Resources Information Center

Nazarko, Joanicjusz; Kuzmicz, Katarzyna Anna; Szubzda-Prutis, Elzbieta; Urban, Joanna

2009-01-01

The purposes of this paper are twofold: a presentation of the theoretical basis of benchmarking and a discussion on practical benchmarking applications. Benchmarking is also analyzed as a productivity accelerator. The authors study benchmarking usage in the private and public sectors with due consideration of the specificities of the two areas.…

A context-adaptable approach to clinical guidelines.

PubMed

Terenziani, Paolo; Montani, Stefania; Bottrighi, Alessio; Torchio, Mauro; Molino, Gianpaolo; Correndo, Gianluca

2004-01-01

One of the most relevant obstacles to the use and dissemination of clinical guidelines is the gap between the generality of guidelines (as defined, e.g., by physicians' committees) and the peculiarities of the specific context of application. In particular, general guidelines do not take into account the fact that the tools needed for laboratory and instrumental investigations might be unavailable at a given hospital. Moreover, computer-based guideline managers must also be integrated with the Hospital Information System (HIS), and usually different DBMS are adopted by different hospitals. The GLARE (Guideline Acquisition, Representation and Execution) system addresses these issues by providing a facility for automatic resource-based adaptation of guidelines to the specific context of application, and by providing a modular architecture in which only limited and well-localised changes are needed to integrate the system with the HIS at hand.

Perceptual load in sport and the heuristic value of the perceptual load paradigm in examining expertise-related perceptual-cognitive adaptations.

PubMed

Furley, Philip; Memmert, Daniel; Schmid, Simone

2013-03-01

In two experiments, we transferred perceptual load theory to the dynamic field of team sports and tested the predictions derived from the theory using a novel task and stimuli. We tested a group of college students (N = 33) and a group of expert team sport players (N = 32) on a general perceptual load task and a complex, soccer-specific perceptual load task in order to extend the understanding of the applicability of perceptual load theory and further investigate whether distractor interference may differ between the groups, as the sport-specific processing task may not exhaust the processing capacity of the expert participants. In both, the general and the specific task, the pattern of results supported perceptual load theory and demonstrates that the predictions of the theory also transfer to more complex, unstructured situations. Further, perceptual load was the only determinant of distractor processing, as we neither found expertise effects in the general perceptual load task nor the sport-specific task. We discuss the heuristic utility of using response-competition paradigms for studying both general and domain-specific perceptual-cognitive adaptations.

Water resources by orbital remote sensing: Examples of applications

NASA Technical Reports Server (NTRS)

Martini, P. R. (Principal Investigator)

1984-01-01

Selected applications of orbital remote sensing to water resources undertaken by INPE are described. General specifications of Earth application satellites and technical characteristics of LANDSAT 1, 2, 3, and 4 subsystems are described. Spatial, temporal and spectral image attributes of water as well as methods of image analysis for applications to water resources are discussed. Selected examples are referred to flood monitoring, analysis of water suspended sediments, spatial distribution of pollutants, inventory of surface water bodies and mapping of alluvial aquifers.

Dimensions for hearing-impaired mobile application usability model

NASA Astrophysics Data System (ADS)

Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily; Omar, Mohd Adan

2017-10-01

This paper discuss on the dimensions that has been derived for the hearing-impaired mobile applications usability model. General usability model consist of general dimension for evaluating mobile application however requirements for the hearing-impaired are overlooked and often scanted. This led towards mobile application developed for the hearing-impaired are left unused. It is also apparent that these usability models do not consider accessibility dimensions according to the requirement of the special users. This complicates the work of usability practitioners as well as academician that practices research usability when application are developed for the specific user needs. To overcome this issue, dimension chosen for the hearing-impaired are ensured to be align with the real need of the hearing-impaired mobile application. Besides literature studies, requirements for the hearing-impaired mobile application have been identified through interview conducted with hearing-impaired mobile application users that were recorded as video outputs and analyzed using Nvivo. Finally total of 6 out of 15 dimensions gathered are chosen for the proposed model and presented.

Self-Ordered Titanium Dioxide Nanotube Arrays: Anodic Synthesis and Their Photo/Electro-Catalytic Applications

PubMed Central

Smith, York R.; Ray, Rupashree S.; Carlson, Krista; Sarma, Biplab; Misra, Mano

2013-01-01

Metal oxide nanotubes have become a widely investigated material, more specifically, self-organized titania nanotube arrays synthesized by electrochemical anodization. As a highly investigated material with a wide gamut of applications, the majority of published literature focuses on the solar-based applications of this material. The scope of this review summarizes some of the recent advances made using metal oxide nanotube arrays formed via anodization in solar-based applications. A general methodology for theoretical modeling of titania surfaces in solar applications is also presented. PMID:28811415

40 CFR 1066.20 - Units of measure and overview of calculations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... POLLUTION CONTROLS VEHICLE-TESTING PROCEDURES Applicability and General Provisions § 1066.20 Units of..., repeatability, linearity, or noise specification. See 40 CFR 1065.1001 for the definition of tolerance. In this...

Advanced Manufacturing Processes in the Motor Vehicle Industry

DOT National Transportation Integrated Search

1983-05-01

Advanced manufacturing processes, which include a range of automation and management techniques, are aiding U.S. motor vehicle manufacturers to reduce vehicle costs. This report discusses these techniques in general and their specific applications in...

22 CFR 171.14 - Fees to be charged-general.

Code of Federal Regulations, 2011 CFR

2011-04-01

... searching for records responsive to a FOIA request and operator/programmer salary attributable to the search... applicability of a specific exemption to a particular record or portion of a record. (c) Duplication of records...

76 FR 16614 - Magnuson-Stevens Act Provisions; General Provisions for Domestic Fisheries; Application for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... gear-specific fish possession restrictions for the purpose of collecting fishery dependent catch data and biological samples that is being conducted by the Northeast Fisheries Science Center's (NEFSC...

Structural Embeddings: Mechanization with Method

NASA Technical Reports Server (NTRS)

Munoz, Cesar; Rushby, John

1999-01-01

The most powerful tools for analysis of formal specifications are general-purpose theorem provers and model checkers, but these tools provide scant methodological support. Conversely, those approaches that do provide a well-developed method generally have less powerful automation. It is natural, therefore, to try to combine the better-developed methods with the more powerful general-purpose tools. An obstacle is that the methods and the tools often employ very different logics. We argue that methods are separable from their logics and are largely concerned with the structure and organization of specifications. We, propose a technique called structural embedding that allows the structural elements of a method to be supported by a general-purpose tool, while substituting the logic of the tool for that of the method. We have found this technique quite effective and we provide some examples of its application. We also suggest how general-purpose systems could be restructured to support this activity better.

Human Rights and Private Ordering in Virtual Worlds

NASA Astrophysics Data System (ADS)

Oosterbaan, Olivier

This paper explores the application of human rights in (persistent) virtual world environments. The paper begins with describing a number of elements that most virtual environments share and that are relevant for the application of human rights in such a setting; and by describing in a general nature the application of human rights between private individuals. The paper then continues by discussing the application in virtual environments of two universally recognized human rights, namely freedom of expression, and freedom from discrimination. As these specific rights are discussed, a number of more general conclusions on the application of human rights in virtual environments are drawn. The first general conclusion being that, because virtual worlds are private environments, participants are subject to private ordering. The second general conclusion being that participants and non-participants alike have to accept at times that in-world expressions are to an extent private speech. The third general conclusion is that, where participants represent themselves in-world, other participants cannot assume that such in-world representation share the characteristics of the human player; and that where virtual environments contain game elements, participants and non-participants alike should not take everything that happens in the virtual environment at face value or literally, which does however not amount to having to accept a higher level of infringement on their rights for things that happen in such an environment.

Survey of application of radiation to preparative chemistry

NASA Technical Reports Server (NTRS)

Philipp, W. H.

1973-01-01

The use of radiation for preparative chemistry in liquid solutions is investigated. General principles are presented and preparations involving reduction, oxidation, polymerization, and decomposition are given. The use of various solvents, water, other inorganic liquids and organic liquids for this purpose is discussed. Finally, a commentary is made on some specific applications where radiation chemistry as a preparative technique may be useful.

The Applications of Computers in Education in Developing Countries--with Specific Reference to the Cost-Effectiveness of Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Lai, Kwok-Wing

Designed to examine the application and cost-effectiveness of computer-assisted instruction (CAI) for secondary education in developing countries, this document is divided into eight chapters. A general introduction defines the research problem, describes the research methodology, and provides definitions of key terms used throughout the paper.…

Script-like attachment representations in dreams containing current romantic partners.

PubMed

Selterman, Dylan; Apetroaia, Adela; Waters, Everett

2012-01-01

Recent research has demonstrated parallels between romantic attachment styles and general dream content. The current study examined partner-specific attachment representations alongside dreams that contained significant others. The general prediction was that dreams would follow the "secure base script," and a general correspondence would emerge between secure attachment cognitions in waking life and in dreams. Sixty-one undergraduate student participants in committed dating relationships of six months duration or longer completed the Secure Base Script Narrative Assessment at Time 1, and then completed a dream diary for 14 consecutive days. Blind coders scored dreams that contained significant others using the same criteria for secure base content in laboratory narratives. Results revealed a significant association between relationship-specific attachment security and the degree to which dreams about romantic partners followed the secure base script. The findings illuminate our understanding of mental representations with regards to specific attachment figures. Implications for attachment theory and clinical applications are discussed.

Hanford facility dangerous waste permit application, general information portion. Revision 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sonnichsen, J.C.

1997-08-21

For purposes of the Hanford facility dangerous waste permit application, the US Department of Energy`s contractors are identified as ``co-operators`` and sign in that capacity (refer to Condition I.A.2. of the Dangerous Waste Portion of the Hanford Facility Resource Conservation and Recovery Act Permit). Any identification of these contractors as an ``operator`` elsewhere in the application is not meant to conflict with the contractors` designation as co-operators but rather is based on the contractors` contractual status with the U.S. Department of Energy, Richland Operations Office. The Dangerous Waste Portion of the initial Hanford Facility Resource Conservation and Recovery Act Permit,more » which incorporated five treatment, storage, and/or disposal units, was based on information submitted in the Hanford Facility Dangerous Waste Permit Application and in closure plan and closure/postclosure plan documentation. During 1995, the Dangerous Waste Portion was modified twice to incorporate another eight treatment, storage, and/or disposal units; during 1996, the Dangerous Waste Portion was modified once to incorporate another five treatment, storage, and/or disposal units. The permit modification process will be used at least annually to incorporate additional treatment, storage, and/or disposal units as permitting documentation for these units is finalized. The units to be included in annual modifications are specified in a schedule contained in the Dangerous Waste Portion of the Hanford Facility Resource Conservation and Recovery Act Permit. Treatment, storage, and/or disposal units will remain in interim status until incorporated into the Permit. The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (this document, DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to individual operating treatment, storage, and/or disposal units for which Part B permit application documentation has been, or is anticipated to be, submitted. Documentation for treatment, storage, and/or disposal units undergoing closure, or for units that are, or are anticipated to be, dispositioned through other options, will continue to be submitted by the Permittees in accordance with the provisions of the Hanford Federal Facility Agreement and Consent Order. However, the scope of the General Information Portion includes information that could be used to discuss operating units, units undergoing closure, or units being dispositioned through other options. Both the General Information and Unit-Specific portions of the Hanford Facility Dangerous Waste Permit Application address the contents of the Part B permit application guidance documentation prepared by the Washington State Department of Ecology and the U.S. Environmental Protection Agency, with additional information needs defined by revisions of Washington Administrative Code 173-303 and by the Hazardous and Solid Waste Amendments. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (i.e., either operating units, units undergoing closure, or units being dispositioned through other options).« less

Effective color design for displays

NASA Astrophysics Data System (ADS)

MacDonald, Lindsay W.

2002-06-01

Visual communication is a key aspect of human-computer interaction, which contributes to the satisfaction of user and application needs. For effective design of presentations on computer displays, color should be used in conjunction with the other visual variables. The general needs of graphic user interfaces are discussed, followed by five specific tasks with differing criteria for display color specification - advertising, text, information, visualization and imaging.

Site-specific management of cotton root rot using airborne and high resolution satellite imagery and variable rate technology

USDA-ARS?s Scientific Manuscript database

Cotton root rot is a century-old cotton disease that can now be effectively controlled with Topguard Terra Fungicide. As this disease tends to occur in the same general areas within fields in recurring years, site-specific application of the fungicide only to the infested areas can be more effective...

BioVapor Model Evaluation

EPA Science Inventory

General background on modeling and specifics of modeling vapor intrusion are given. Three classical model applications are described and related to the problem of petroleum vapor intrusion. These indicate the need for model calibration and uncertainty analysis. Evaluation of Bi...

User applications unique to mobile satellites

NASA Technical Reports Server (NTRS)

Castiel, David

1990-01-01

As AMSC enters the market with its mobile satellite services, it faces a sophisticated user group that has already experimented with a wide range of communications services, including cellular radio and Ku-band satellite messaging. AMSC's challenge is to define applications unique to the capabilities of its dedicated L band satellite and consistent with the provisions outlined in its FCC license. Through a carefully researched approach to its three main markets (aeronautical, land mobile, and maritime) AMSC is discovering a wellspring of interest in corporate and general aviation, trucking companies, pipeline monitoring and control companies, maritime management firms, telecommunications companies, and government agencies. A general overview is provided of AMSC's FCC license and corporate history, and the specific applications unique to each user group is discussed.

43 CFR 429.26 - When may Reclamation reduce or waive costs or fees?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false When may Reclamation reduce or waive costs... the value of the use ✓ ✓ ✓ (3) The use will benefit the general public with no specific entity or... ✓ ✓ ✓ (5) Applicant is a non-profit or educational entity and the use provides a general public benefit...

General medicine and surgery for dental practitioners: part 2. Medical emergencies in dental practice: the drug box, equipment and basic principles of management.

PubMed

Greenwood, M; Meechan, J G

2014-06-13

Dental practitioners need knowledge of the diagnosis and management of medical emergencies. This paper deals with the general aspects of emergency treatment including basic management principles which are applicable to all emergencies. The next paper in this series, part 3, deals with more specific aspects of medical emergency management.

Task-Specific Ionic Liquids for Mars Exploration (Green Chemistry for a Red Planet)

NASA Technical Reports Server (NTRS)

Karr, L. J.; Curreri, P. A.; Paley, M. S.; Kaukler, W. F.; Marone, M. J.

2012-01-01

Ionic Liquids (ILs) are organic salts with low melting points that are liquid at or near room temperature. The combinations of available ions and task-specific molecular designability make them suitable for a huge variety of tasks. Because of their low flammability, low vapor pressure, and stability in harsh environments (extreme temperatures, hard vacuum) they are generally much safer and "greener" than conventional chemicals and are thus suitable for a wide range of applications that support NASA exploration goals. This presentation describes several of the ongoing applications that are being developed at MSFC.

A protocol for better design, application, and communication of population viability analyses.

PubMed

Pe'er, Guy; Matsinos, Yiannis G; Johst, Karin; Franz, Kamila W; Turlure, Camille; Radchuk, Viktoriia; Malinowska, Agnieszka H; Curtis, Janelle M R; Naujokaitis-Lewis, Ilona; Wintle, Brendan A; Henle, Klaus

2013-08-01

Population viability analyses (PVAs) contribute to conservation theory, policy, and management. Most PVAs focus on single species within a given landscape and address a specific problem. This specificity often is reflected in the organization of published PVA descriptions. Many lack structure, making them difficult to understand, assess, repeat, or use for drawing generalizations across PVA studies. In an assessment comparing published PVAs and existing guidelines, we found that model selection was rarely justified; important parameters remained neglected or their implementation was described vaguely; limited details were given on parameter ranges, sensitivity analysis, and scenarios; and results were often reported too inconsistently to enable repeatability and comparability. Although many guidelines exist on how to design and implement reliable PVAs and standards exist for documenting and communicating ecological models in general, there is a lack of organized guidelines for designing, applying, and communicating PVAs that account for their diversity of structures and contents. To fill this gap, we integrated published guidelines and recommendations for PVA design and application, protocols for documenting ecological models in general and individual-based models in particular, and our collective experience in developing, applying, and reviewing PVAs. We devised a comprehensive protocol for the design, application, and communication of PVAs (DAC-PVA), which has 3 primary elements. The first defines what a useful PVA is; the second element provides a workflow for the design and application of a useful PVA and highlights important aspects that need to be considered during these processes; and the third element focuses on communication of PVAs to ensure clarity, comprehensiveness, repeatability, and comparability. Thereby, DAC-PVA should strengthen the credibility and relevance of PVAs for policy and management, and improve the capacity to generalize PVA findings across studies. © 2013 Society for Conservation Biology.

A study on specific heat capacities of Li-ion cell components and their influence on thermal management

NASA Astrophysics Data System (ADS)

Loges, André; Herberger, Sabrina; Seegert, Philipp; Wetzel, Thomas

2016-12-01

Thermal models of Li-ion cells on various geometrical scales and with various complexity have been developed in the past to account for the temperature dependent behaviour of Li-ion cells. These models require accurate data on thermal material properties to offer reliable validation and interpretation of the results. In this context a thorough study on the specific heat capacities of Li-ion cells starting from raw materials and electrode coatings to representative unit cells of jelly rolls/electrode stacks with lumped values was conducted. The specific heat capacity is reported as a function of temperature and state of charge (SOC). Seven Li-ion cells from different manufactures with different cell chemistry, application and design were considered and generally applicable correlations were developed. A 2D thermal model of an automotive Li-ion cell for plug-in hybrid electric vehicle (PHEV) application illustrates the influence of specific heat capacity on the effectivity of cooling concepts and the temperature development of Li-ion cells.

Crystallization of glass-forming liquids: Specific surface energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmelzer, Jürn W. P., E-mail: juern-w.schmelzer@uni-rostock.de; Abyzov, Alexander S.

2016-08-14

A generalization of the Stefan-Skapski-Turnbull relation for the melt-crystal specific interfacial energy is developed in terms of the generalized Gibbs approach extending its standard formulation to thermodynamic non-equilibrium states. With respect to crystal nucleation, this relation is required in order to determine the parameters of the critical crystal clusters being a prerequisite for the computation of the work of critical cluster formation. As one of its consequences, a relation for the dependence of the specific surface energy of critical clusters on temperature and pressure is derived applicable for small and moderate deviations from liquid-crystal macroscopic equilibrium states. Employing the Stefan-Skapski-Turnbullmore » relation, general expressions for the size and the work of formation of critical crystal clusters are formulated. The resulting expressions are much more complex as compared to the respective relations obtained via the classical Gibbs theory. Latter relations are retained as limiting cases of these more general expressions for moderate undercoolings. By this reason, the formulated, here, general relations for the specification of the critical cluster size and the work of critical cluster formation give a key for an appropriate interpretation of a variety of crystallization phenomena occurring at large undercoolings which cannot be understood in terms of the Gibbs’ classical treatment.« less

A general way for quantitative magnetic measurement by transmitted electrons

NASA Astrophysics Data System (ADS)

Song, Dongsheng; Li, Gen; Cai, Jianwang; Zhu, Jing

2016-01-01

EMCD (electron magnetic circular dichroism) technique opens a new door to explore magnetic properties by transmitted electrons. The recently developed site-specific EMCD technique makes it possible to obtain rich magnetic information from the Fe atoms sited at nonequivalent crystallographic planes in NiFe2O4, however it is based on a critical demand for the crystallographic structure of the testing sample. Here, we have further improved and tested the method for quantitative site-specific magnetic measurement applicable for more complex crystallographic structure by using the effective dynamical diffraction effects (general routine for selecting proper diffraction conditions, making use of the asymmetry of dynamical diffraction for design of experimental geometry and quantitative measurement, etc), and taken yttrium iron garnet (Y3Fe5O12, YIG) with more complex crystallographic structure as an example to demonstrate its applicability. As a result, the intrinsic magnetic circular dichroism signals, spin and orbital magnetic moment of iron with site-specific are quantitatively determined. The method will further promote the development of quantitative magnetic measurement with high spatial resolution by transmitted electrons.

Thermal infrared remote sensing of surface features for renewable resource applications

NASA Technical Reports Server (NTRS)

Welker, J. E.

1981-01-01

The subjects of infrared remote sensing of surface features for renewable resource applications is reviewed with respect to the basic physical concepts involved at the Earth's surface and up through the atmosphere, as well as the historical development of satellite systems which produce such data at increasingly greater spatial resolution. With this general background in hand, the growth of a variety of specific renewable resource applications using the developing thermal infrared technology are discussed, including data from HCMM investigators. Recommendations are made for continued growth in this field of applications.

Applications and requirements for real-time simulators in ground-test facilities

NASA Technical Reports Server (NTRS)

Arpasi, Dale J.; Blech, Richard A.

1986-01-01

This report relates simulator functions and capabilities to the operation of ground test facilities, in general. The potential benefits of having a simulator are described to aid in the selection of desired applications for a specific facility. Configuration options for integrating a simulator into the facility control system are discussed, and a logical approach to configuration selection based on desired applications is presented. The functional and data path requirements to support selected applications and configurations are defined. Finally, practical considerations for implementation (i.e., available hardware and costs) are discussed.

Information about the Catalog of Federal Domestic Assistance and EPA Programs

EPA Pesticide Factsheets

The primary purpose of the Catalog is to assist potential applicants in identifying programs which meet their specific objectives & to provide general information on Federal assistance programs. In 1977 Congress passed the Federal Program Information Act.

10 CFR 600.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES General § 600.1 Purpose. This part implements... procedures applicable to the award and administration of grants, cooperative agreements, and technology investment agreements. The specific guidance for technology investment agreements is contained in part 603...

EVALUATION OF SOLID SORBENTS FOR WATER SAMPLING

EPA Science Inventory

The report describes a systematic evaluation of the applicability of macroreticular resins for general and compound-specific sampling of organics. The first portion is an extensive review of current pertinent literature concerned with the use of macroreticular resins for sampling...

Naturalistic driving data for the analysis of car-following models.

DOT National Transportation Integrated Search

2013-02-01

The first research effort investigates the general application of naturalistic driving data to the modeling of car-following behavior. The driver-specific data available from naturalistic driving studies provides a unique perspective from which to te...

Programming Language Software For Graphics Applications

NASA Technical Reports Server (NTRS)

Beckman, Brian C.

1993-01-01

New approach reduces repetitive development of features common to different applications. High-level programming language and interactive environment with access to graphical hardware and software created by adding graphical commands and other constructs to standardized, general-purpose programming language, "Scheme". Designed for use in developing other software incorporating interactive computer-graphics capabilities into application programs. Provides alternative to programming entire applications in C or FORTRAN, specifically ameliorating design and implementation of complex control and data structures typifying applications with interactive graphics. Enables experimental programming and rapid development of prototype software, and yields high-level programs serving as executable versions of software-design documentation.

Sensors, Volume 4, Thermal Sensors

NASA Astrophysics Data System (ADS)

Scholz, Jorg; Ricolfi, Teresio

1996-12-01

'Sensors' is the first self-contained series to deal with the whole area of sensors. It describes general aspects, technical and physical fundamentals, construction, function, applications and developments of the various types of sensors. This volume describes the construction and applicational aspects of thermal sensors while presenting a rigorous treatment of the underlying physical principles. It provides a unique overview of the various categories of sensors as well as of specific groups, e.g. temperature sensors (resistance thermometers, thermocouples, and radiation thermometers), noise and acoustic thermometers, heat-flow and mass-flow sensors. Specific facettes of applications are presented by specialists from different fields including process control, automotive technology and cryogenics. This volume is an indispensable reference work and text book for both specialists and newcomers, researchers and developers.

40 CFR 152.95 - Citation of all studies in the Agency's files pertinent to a specific data requirement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROCEDURES Procedures To Ensure Protection of Data Submitters' Rights § 152.95 Citation of all studies in the... requirement. The applicant who selects this cite-all option must submit to the Agency: (a) A general offer to... may be limited to apply only to data pertinent to the specific data requirement(s) for which the cite...

Design concepts for a composite door frame system for general automotive applications

NASA Technical Reports Server (NTRS)

Tauber, J. A.

1976-01-01

Conceptual design, manufacturing process, and costs are explored to determine the feasibility of replacing present steel parts in automotive door structures with various composite materials. The problems of conforming to present anti-intrusion specifications with advanced materials are examined and discussed. Modest weight reductions, at competitive costs, were identified for the utilization of specific composite materials in automotive door structures.

VLSI synthesis of digital application specific neural networks

NASA Technical Reports Server (NTRS)

Beagles, Grant; Winters, Kel

1991-01-01

Neural networks tend to fall into two general categories: (1) software simulations, or (2) custom hardware that must be trained. The scope of this project is the merger of these two classifications into a system whereby a software model of a network is trained to perform a specific task and the results used to synthesize a standard cell realization of the network using automated tools.

Proceedings of the Open Sessions of the Workshop on Imaging Trackers and Autonomous Acquisition Applications for Missile Guidance Held at Redstone Arsenal, Alabama on 19-20 November 1979

DTIC Science & Technology

1979-11-01

a generalized cooccurrence matrix. Describing image texture is an important problem in the design of image understanding systems . Applications as...display system design optimization and video signal processing. Based on a study by Southern Research Institute , a number of options were identified...Specification for Target Acquisition Designation System (U), RFP # AMC-DP-AAH-H4020, i2 Apr 77. 4. Terminal Homing Applications of Solid State Image

Robust integration schemes for generalized viscoplasticity with internal-state variables. Part 2: Algorithmic developments and implementation

NASA Technical Reports Server (NTRS)

Li, Wei; Saleeb, Atef F.

1995-01-01

This two-part report is concerned with the development of a general framework for the implicit time-stepping integrators for the flow and evolution equations in generalized viscoplastic models. The primary goal is to present a complete theoretical formulation, and to address in detail the algorithmic and numerical analysis aspects involved in its finite element implementation, as well as to critically assess the numerical performance of the developed schemes in a comprehensive set of test cases. On the theoretical side, the general framework is developed on the basis of the unconditionally-stable, backward-Euler difference scheme as a starting point. Its mathematical structure is of sufficient generality to allow a unified treatment of different classes of viscoplastic models with internal variables. In particular, two specific models of this type, which are representative of the present start-of-art in metal viscoplasticity, are considered in applications reported here; i.e., fully associative (GVIPS) and non-associative (NAV) models. The matrix forms developed for both these models are directly applicable for both initially isotropic and anisotropic materials, in general (three-dimensional) situations as well as subspace applications (i.e., plane stress/strain, axisymmetric, generalized plane stress in shells). On the computational side, issues related to efficiency and robustness are emphasized in developing the (local) interative algorithm. In particular, closed-form expressions for residual vectors and (consistent) material tangent stiffness arrays are given explicitly for both GVIPS and NAV models, with their maximum sizes 'optimized' to depend only on the number of independent stress components (but independent of the number of viscoplastic internal state parameters). Significant robustness of the local iterative solution is provided by complementing the basic Newton-Raphson scheme with a line-search strategy for convergence. In the present second part of the report, we focus on the specific details of the numerical schemes, and associated computer algorithms, for the finite-element implementation of GVIPS and NAV models.

Bibliography. College and University Business Administration.

ERIC Educational Resources Information Center

National Association of College and University Business Officers, Washington, DC.

This regularly-updated bibliography is organized by chapter and is generally limited to publications that have specific application to colleges and universities. The chapters include: business administration in higher education; institutional planning; management information systems and data processing; risk management and insurance;…

Budget Anthropology: A Unit Sampler.

ERIC Educational Resources Information Center

Fraker, G. Alan

Creative and inexpensive teaching suggestions for high school anthropology courses are presented. They are chosen specifically for programs which cannot afford expensive curriculum materials. All activities demonstrate the application of universal anthropological principles to the American society. Seven areas which reflect the general functions…

19 CFR 123.73 - Application to participate.

Code of Federal Regulations, 2010 CFR

2010-04-01

... number(s), conveyance-specific identifying markings, e.g., vehicle identification numbers (VINs), and any... information: (a) General business identification and site condition information. The name and address of the... individual LBCIP-authorized drivers; (c) Conveyance identification information. A listing of the conveyances...

Information about Federal Assistance Listings and the Catalog of Federal Domestic Assistance

EPA Pesticide Factsheets

The primary purpose of the Catalog is to assist potential applicants in identifying programs which meet their specific objectives & to provide general information on Federal assistance programs. In 1977 Congress passed the Federal Program Information Act.

Microcomputers in Geography.

ERIC Educational Resources Information Center

Snaden, James N.; And Others

Geographers in the United States rely heavily on microcomputers. They employ microcomputers to enhance three general categories of tasks: word processing and other productivity needs, geographic instruction, and discipline-specific applications. Word processing and desktop publishing continue to be the primary uses of microcomputers by…

40 CFR 600.001-86 - General applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (b)(1) Manufacturers that produce only electric vehicles are exempt from the requirement of this subpart, except with regard to the requirements in those sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide production (excluding electric vehicle production) of less than...

Professor: A motorized field-based phenotyping cart

USDA-ARS?s Scientific Manuscript database

An easy-to-customize, low-cost, low disturbance, motorized proximal sensing cart for field-based high-throughput phenotyping is described. General dimensions, motor specifications, and a remote operation application are given. The cart, named Professor, supports mounting multiple proximal sensors an...

Normal Genetic Variation, Cognition, and Aging

PubMed Central

Greenwood, P. M.; Parasuraman, Raja

2005-01-01

This article reviews the modulation of cognitive function by normal genetic variation. Although the heritability of “g” is well established, the genes that modulate specific cognitive functions are largely unidentified. Application of the allelic association approach to individual differences in cognition has begun to reveal the effects of single nucleotide polymorphisms on specific and general cognitive functions. This article proposes a framework for relating genotype to cognitive phenotype by considering the effect of genetic variation on the protein product of specific genes within the context of the neural basis of particular cognitive domains. Specificity of effects is considered, from genes controlling part of one receptor type to genes controlling agents of neuronal repair, and evidence is reviewed of cognitive modulation by polymorphisms in dopaminergic and cholinergic receptor genes, dopaminergic enzyme genes, and neurotrophic genes. Although allelic variation in certain genes can be reliably linked to cognition—specifically to components of attention, working memory, and executive function in healthy adults—the specificity, generality, and replicability of the effects are not fully known. PMID:15006290

Atmospheric, Magnetospheric and plasmas in Space (AMPS) spacelab payload definition study; Volume 4: Part 3, Labcraft instrument systems general specification

NASA Technical Reports Server (NTRS)

Keeley, J. T.

1976-01-01

Guidelines and general requirements applicable to the development of instrument flight hardware intended for use on the GSFC Shuttle Scientific Payloads Program are given. Criteria, guidelines, and an organized approach to specifying the appropriate level of requirements for each instrument in order to permit its development at minimum cost while still assuring crew safety, are included. It is recognized that the instruments for these payloads will encompass wide ranges of complexity, cost, development risk, and safety hazards. The flexibility required to adapt the controls, documentation, and verification requirements in accord with the specific instrument is provided.

Integrating a Hypernymic Proposition Interpreter into a Semantic Processor for Biomedical Texts

PubMed Central

Fiszman, Marcelo; Rindflesch, Thomas C.; Kilicoglu, Halil

2003-01-01

Semantic processing provides the potential for producing high quality results in natural language processing (NLP) applications in the biomedical domain. In this paper, we address a specific semantic phenomenon, the hypernymic proposition, and concentrate on integrating the interpretation of such predications into a more general semantic processor in order to improve overall accuracy. A preliminary evaluation assesses the contribution of hypernymic propositions in providing more specific semantic predications and thus improving effectiveness in retrieving treatment propositions in MEDLINE abstracts. Finally, we discuss the generalization of this methodology to additional semantic propositions as well as other types of biomedical texts. PMID:14728170

A review of methods to estimate cause-specific mortality in presence of competing risks

USGS Publications Warehouse

Heisey, Dennis M.; Patterson, Brent R.

2006-01-01

Estimating cause-specific mortality is often of central importance for understanding the dynamics of wildlife populations. Despite such importance, methodology for estimating and analyzing cause-specific mortality has received little attention in wildlife ecology during the past 20 years. The issue of analyzing cause-specific, mutually exclusive events in time is not unique to wildlife. In fact, this general problem has received substantial attention in human biomedical applications within the context of biostatistical survival analysis. Here, we consider cause-specific mortality from a modern biostatistical perspective. This requires carefully defining what we mean by cause-specific mortality and then providing an appropriate hazard-based representation as a competing risks problem. This leads to the general solution of cause-specific mortality as the cumulative incidence function (CIF). We describe the appropriate generalization of the fully nonparametric staggered-entry Kaplan–Meier survival estimator to cause-specific mortality via the nonparametric CIF estimator (NPCIFE), which in many situations offers an attractive alternative to the Heisey–Fuller estimator. An advantage of the NPCIFE is that it lends itself readily to risk factors analysis with standard software for Cox proportional hazards model. The competing risks–based approach also clarifies issues regarding another intuitive but erroneous "cause-specific mortality" estimator based on the Kaplan–Meier survival estimator and commonly seen in the life sciences literature.

IS THERE A DOWNSIDE TO CUSTOMIZING CARE? IMPLICATIONS OF GENERAL AND PATIENT-SPECIFIC TREATMENT STRATEGIES

PubMed Central

Johnson, Paul E.; O’Connor, Patrick J.

2009-01-01

The use of general clinical guidelines versus customization of patient care presents a dilemma for clinicians managing chronic illness. We propose that the performance of customized strategies for the management of chronic illness depends on accurate patient categorization, and inaccurate categorization can lead to worse performance than that achievable using a general clinical guideline. This paper is based on an analysis of a basic utility model differentiating outcomes between the use of general management strategies and customized strategies. Results of the analysis have four implications regarding the design and use of clinical guidelines and customization of care: (1) the balance between the applications of more general strategies versus customization depends on the specificity and accuracy of the strategies; (2) adoption of clinical guidelines may be stifled as the complexity of guidelines increases to account for growing evidence; (3) clinical inertia (i.e. the failure to intensify an indicated treatment) can be a rational response to strategy specificity and the probability of misapplication; and, (4) current clinical guidelines and other decision-support tools may be improved if they accommodate the need for customization of strategies for some patients while providing support for proper categorization of patients. PMID:20367722

A general system for automatic biomedical image segmentation using intensity neighborhoods.

PubMed

Chen, Cheng; Ozolek, John A; Wang, Wei; Rohde, Gustavo K

2011-01-01

Image segmentation is important with applications to several problems in biology and medicine. While extensively researched, generally, current segmentation methods perform adequately in the applications for which they were designed, but often require extensive modifications or calibrations before being used in a different application. We describe an approach that, with few modifications, can be used in a variety of image segmentation problems. The approach is based on a supervised learning strategy that utilizes intensity neighborhoods to assign each pixel in a test image its correct class based on training data. We describe methods for modeling rotations and variations in scales as well as a subset selection for training the classifiers. We show that the performance of our approach in tissue segmentation tasks in magnetic resonance and histopathology microscopy images, as well as nuclei segmentation from fluorescence microscopy images, is similar to or better than several algorithms specifically designed for each of these applications.

Computer vision for general purpose visual inspection: a fuzzy logic approach

NASA Astrophysics Data System (ADS)

Chen, Y. H.

In automatic visual industrial inspection, computer vision systems have been widely used. Such systems are often application specific, and therefore require domain knowledge in order to have a successful implementation. Since visual inspection can be viewed as a decision making process, it is argued that the integration of fuzzy logic analysis and computer vision systems provides a practical approach to general purpose visual inspection applications. This paper describes the development of an integrated fuzzy-rule-based automatic visual inspection system. Domain knowledge about a particular application is represented as a set of fuzzy rules. From the status of predefined fuzzy variables, the set of fuzzy rules are defuzzified to give the inspection results. A practical application where IC marks (often in the forms of English characters and a company logo) inspection is demonstrated, which shows a more consistent result as compared to a conventional thresholding method.

MRI correlates of general intelligence in neurotypical adults.

PubMed

Malpas, Charles B; Genc, Sila; Saling, Michael M; Velakoulis, Dennis; Desmond, Patricia M; O'Brien, Terence J

2016-02-01

There is growing interest in the neurobiological substrate of general intelligence. Psychometric estimates of general intelligence are reduced in a range of neurological disorders, leading to practical application as sensitive, but non-specific, markers of cerebral disorder. This study examined estimates of general intelligence in neurotypical adults using diffusion tensor imaging and resting-state functional connectivity analysis. General intelligence was related to white matter organisation across multiple brain regions, confirming previous work in older healthy adults. We also found that variation in general intelligence was related to a large functional sub-network involving all cortical lobes of the brain. These findings confirm that individual variance in general intelligence is related to diffusely represented brain networks. Copyright © 2015 Elsevier Ltd. All rights reserved.

What’s in a drop? Correlating observations and outcomes to guide macromolecular crystallization experiments

PubMed Central

Luft, Joseph R.; Wolfley, Jennifer R.; Snell, Edward H.

2011-01-01

Observations of crystallization experiments are classified as specific outcomes and integrated through a phase diagram to visualize solubility and thereby direct subsequent experiments. Specific examples are taken from our high-throughput crystallization laboratory which provided a broad scope of data from 20 million crystallization experiments on 12,500 different biological macromolecules. The methods and rationale are broadly and generally applicable in any crystallization laboratory. Through a combination of incomplete factorial sampling of crystallization cocktails, standard outcome classifications, visualization of outcomes as they relate chemically and application of a simple phase diagram approach we demonstrate how to logically design subsequent crystallization experiments. PMID:21643490

7 CFR 959.102 - Communications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Communications. 959.102 Section 959.102 Agriculture... Regulations General § 959.102 Communications. Unless otherwise provided in the order, or by specific direction of the committee, all reports, applications, submittals, requests and communications in connection...

25 CFR 515.12 - Specific exemptions.

Code of Federal Regulations, 2010 CFR

2010-04-01

...), (e)(1) and (f): Indian Gaming Individuals Records System (b) The exemptions under paragraph (a) of... NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR GENERAL PROVISIONS PRIVACY ACT PROCEDURES... employment in an Indian gaming operation, the applicable exemption may be waived by the Commission. (c...

40 CFR 600.301-86 - General applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Manufacturers that produce only electric vehicles are exempt from the requirement of this subpart, except with regard to the requirements in those sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide production (excluding electric vehicle production) of less than 10,000 gasoline...

40 CFR 600.301-08 - General applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide production (excluding electric vehicle production) of less than 10,000 gasoline-fueled and/or diesel powered passenger automobiles and light trucks may optionally comply with the electric vehicle requirements in this subpart. [71...

Metallurgical processing: A compilation

NASA Technical Reports Server (NTRS)

1973-01-01

The items in this compilation, all relating to metallurgical processing, are presented in two sections. The first section includes processes which are general in scope and applicable to a variety of metals or alloys. The second describes the processes that concern specific metals and their alloys.

7 CFR 959.102 - Communications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Communications. 959.102 Section 959.102 Agriculture... Regulations General § 959.102 Communications. Unless otherwise provided in the order, or by specific direction of the committee, all reports, applications, submittals, requests and communications in connection...

7 CFR 959.102 - Communications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Communications. 959.102 Section 959.102 Agriculture... Regulations General § 959.102 Communications. Unless otherwise provided in the order, or by specific direction of the committee, all reports, applications, submittals, requests and communications in connection...

40 CFR 600.301-86 - General applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Manufacturers that produce only electric vehicles are exempt from the requirement of this subpart, except with regard to the requirements in those sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide production (excluding electric vehicle production) of less than 10,000 gasoline...

40 CFR 600.001-93 - General applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Manufacturers that produce only electric vehicles are exempt from the requirement of this subpart, except with regard to the requirements in those sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide production (excluding electric vehicle production) of less than 10,000 gasoline...

SIMULATION MODEL FOR WATERSHED MANAGEMENT PLANNING. VOLUME 2. MODEL USER MANUAL

EPA Science Inventory

This report provides a user manual for the hydrologic, nonpoint source pollution simulation of the generalized planning model for evaluating forest and farming management alternatives. The manual contains an explanation of application of specific code and indicates changes that s...

Ideas for Office Occupations Education.

ERIC Educational Resources Information Center

Alverson, Ruby; And Others

Prepared by South Carolina office occupations teachers, this booklet contains ideas for effective and motivating teaching methods in office occupations courses on the secondary school level. Besides ideas generally applicable, suggestions are included for teaching the following specific subjects: (1) accounting, (2) recordkeeping, (3) cooperative…

Evolutionary and biological metaphors for engineering design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jakiela, M.

1994-12-31

Since computing became generally available, there has been strong interest in using computers to assist and automate engineering design processes. Specifically, for design optimization and automation, nonlinear programming and artificial intelligence techniques have been extensively studied. New computational techniques, based upon the natural processes of evolution, adaptation, and learing, are showing promise because of their generality and robustness. This presentation will describe the use of two such techniques, genetic algorithms and classifier systems, for a variety of engineering design problems. Structural topology optimization, meshing, and general engineering optimization are shown as example applications.

Extraterrestrial applications of solar optics for interior illumination

NASA Technical Reports Server (NTRS)

Eijadi, David A.; Williams, Kyle D.

1992-01-01

Solar optics is a terrestrial technology that has potential extraterrestrial applications. Active solar optics (ASO) and passive solar optics (PSO) are two approaches to the transmission of sunlight to remote interior spaces. Active solar optics is most appropriate for task illumination, while PSO is most appropriate for general illumination. Research into solar optics, motivated by energy conservation, has produced lightweight and low-cost materials, products that have applications to NASA's Controlled Ecological Life Support System (CELSS) program and its lunar base studies. Specifically, prism light guides have great potential in these contexts. Several applications of solar optics to lunar base concepts are illustrated.

Programmer's manual for MMLE3, a general FORTRAN program for maximum likelihood parameter estimation

NASA Technical Reports Server (NTRS)

Maine, R. E.

1981-01-01

The MMLE3 is a maximum likelihood parameter estimation program capable of handling general bilinear dynamic equations of arbitrary order with measurement noise and/or state noise (process noise). The basic MMLE3 program is quite general and, therefore, applicable to a wide variety of problems. The basic program can interact with a set of user written problem specific routines to simplify the use of the program on specific systems. A set of user routines for the aircraft stability and control derivative estimation problem is provided with the program. The implementation of the program on specific computer systems is discussed. The structure of the program is diagrammed, and the function and operation of individual routines is described. Complete listings and reference maps of the routines are included on microfiche as a supplement. Four test cases are discussed; listings of the input cards and program output for the test cases are included on microfiche as a supplement.

Development of heat-storage building materials for passive-solar applications

NASA Astrophysics Data System (ADS)

Fletcher, J. W.

A heat storage building material to be used for passive solar applications and general load leveling within building spaces was developed. Specifically, PCM-filled plastic panels are to be developed as wallboard and ceiling panels. Three PCMs (CaCl2, 6H2O; Na2SO4, 10H2O; LiNO3, 3H2O are to be evaluated for use in the double walled, hollow channeled plastic panels. Laboratory development of the panels will include determination of filling and sealing techniques, behavior of the PCMs, container properties and materials compatibility. Testing will include vapor transmission, thermal cycle, dynamic performance, accelerated life and durability tests. In addition to development and testing, an applications analysis will be performed for specific passive solar applications. Conceptual design of a single family passive solar residence will be prepared and performance evaluated. Screening of the three PCM candidates is essentially complete.

Fatigue Crack Growth Database for Damage Tolerance Analysis

NASA Technical Reports Server (NTRS)

Forman, R. G.; Shivakumar, V.; Cardinal, J. W.; Williams, L. C.; McKeighan, P. C.

2005-01-01

The objective of this project was to begin the process of developing a fatigue crack growth database (FCGD) of metallic materials for use in damage tolerance analysis of aircraft structure. For this initial effort, crack growth rate data in the NASGRO (Registered trademark) database, the United States Air Force Damage Tolerant Design Handbook, and other publicly available sources were examined and used to develop a database that characterizes crack growth behavior for specific applications (materials). The focus of this effort was on materials for general commercial aircraft applications, including large transport airplanes, small transport commuter airplanes, general aviation airplanes, and rotorcraft. The end products of this project are the FCGD software and this report. The specific goal of this effort was to present fatigue crack growth data in three usable formats: (1) NASGRO equation parameters, (2) Walker equation parameters, and (3) tabular data points. The development of this FCGD will begin the process of developing a consistent set of standard fatigue crack growth material properties. It is envisioned that the end product of the process will be a general repository for credible and well-documented fracture properties that may be used as a default standard in damage tolerance analyses.

Integrated HTA-FMEA/FMECA methodology for the evaluation of robotic system in urology and general surgery.

PubMed

Frosini, Francesco; Miniati, Roberto; Grillone, Saverio; Dori, Fabrizio; Gentili, Guido Biffi; Belardinelli, Andrea

2016-11-14

The following study proposes and tests an integrated methodology involving Health Technology Assessment (HTA) and Failure Modes, Effects and Criticality Analysis (FMECA) for the assessment of specific aspects related to robotic surgery involving safety, process and technology. The integrated methodology consists of the application of specific techniques coming from the HTA joined to the aid of the most typical models from reliability engineering such as FMEA/FMECA. The study has also included in-site data collection and interviews to medical personnel. The total number of robotic procedures included in the analysis was 44: 28 for urology and 16 for general surgery. The main outcomes refer to the comparative evaluation between robotic, laparoscopic and open surgery. Risk analysis and mitigation interventions come from FMECA application. The small sample size available for the study represents an important bias, especially for the clinical outcomes reliability. Despite this, the study seems to confirm the better trend for robotics' surgical times with comparison to the open technique as well as confirming the robotics' clinical benefits in urology. More complex situation is observed for general surgery, where robotics' clinical benefits directly measured are the lowest blood transfusion rate.

Generalized Differential Calculus and Applications to Optimization

NASA Astrophysics Data System (ADS)

Rector, Robert Blake Hayden

This thesis contains contributions in three areas: the theory of generalized calculus, numerical algorithms for operations research, and applications of optimization to problems in modern electric power systems. A geometric approach is used to advance the theory and tools used for studying generalized notions of derivatives for nonsmooth functions. These advances specifically pertain to methods for calculating subdifferentials and to expanding our understanding of a certain notion of derivative of set-valued maps, called the coderivative, in infinite dimensions. A strong understanding of the subdifferential is essential for numerical optimization algorithms, which are developed and applied to nonsmooth problems in operations research, including non-convex problems. Finally, an optimization framework is applied to solve a problem in electric power systems involving a smart solar inverter and battery storage system providing energy and ancillary services to the grid.

The Generalized Support Software (GSS) Domain Engineering Process: An Object-Oriented Implementation and Reuse Success at Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Condon, Steven; Hendrick, Robert; Stark, Michael E.; Steger, Warren

1997-01-01

The Flight Dynamics Division (FDD) of NASA's Goddard Space Flight Center (GSFC) recently embarked on a far-reaching revision of its process for developing and maintaining satellite support software. The new process relies on an object-oriented software development method supported by a domain specific library of generalized components. This Generalized Support Software (GSS) Domain Engineering Process is currently in use at the NASA GSFC Software Engineering Laboratory (SEL). The key facets of the GSS process are (1) an architecture for rapid deployment of FDD applications, (2) a reuse asset library for FDD classes, and (3) a paradigm shift from developing software to configuring software for mission support. This paper describes the GSS architecture and process, results of fielding the first applications, lessons learned, and future directions

Worldwide wind/diesel hybrid power system study: Potential applications and technical issues

NASA Astrophysics Data System (ADS)

King, W. R.; Johnson, B. L., III

1991-04-01

The world market potential for wind/diesel hybrid technology is a function of the need for electric power, the availability of sufficient wind resource to support wind/diesel power, and the existence of buyers with the financial means to invest in the technology. This study includes data related to each of these three factors. This study does not address market penetration, which would require analysis of application specific wind/diesel economics. Buyer purchase criteria, which are vital to assessing market penetration, are discussed only generally. Countries were screened for a country-specific market analysis based on indicators of need and wind resource. Both developed countries and less developed countries (LDCs) were screened for wind/diesel market potential. Based on the results of the screening, ten countries showing high market potential were selected for more extensive market analyses. These analyses provide country-specific market data to guide wind/diesel technology developers in making design decisions that will lead to a competitive product. Section 4 presents the country-specific data developed for these analyses, including more extensive wind resource characterization, application-specific market opportunities, business conditions, and energy market characterizations. An attempt was made to identify the potential buyers with ability to pay for wind/diesel technology required to meet the application-specific market opportunities identified for each country. Additionally, the country-specific data are extended to corollary opportunities in countries not covered by the study. Section 2 gives recommendations for wind/diesel research based on the findings of the study.

';Best' Practices for Aggregating Subset Results from Archived Datasets

NASA Astrophysics Data System (ADS)

Baskin, W. E.; Perez, J.

2013-12-01

In response to the exponential growth in science data analysis and visualization capabilities Data Centers have been developing new delivery mechanisms to package and deliver large volumes of aggregated subsets of archived data. New standards are evolving to help data providers and application programmers deal with growing needs of the science community. These standards evolve from the best practices gleaned from new products and capabilities. The NASA Atmospheric Sciences Data Center (ASDC) has developed and deployed production provider-specific search and subset web applications for the CALIPSO, CERES, TES, and MOPITT missions. This presentation explores several use cases that leverage aggregated subset results and examines the standards and formats ASDC developers applied to the delivered files as well as the implementation strategies for subsetting and processing the aggregated products. The following topics will be addressed: - Applications of NetCDF CF conventions to aggregated level 2 satellite subsets - Data-Provider-Specific format requirements vs. generalized standards - Organization of the file structure of aggregated NetCDF subset output - Global Attributes of individual subsetted files vs. aggregated results - Specific applications and framework used for subsetting and delivering derivative data files

49 CFR 178.71 - Specifications for UN pressure receptacles.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) [Reserved] (g) Design and construction requirements for UN refillable seamless steel cylinders. In addition to the general requirements of this section, UN refillable seamless steel cylinders must conform to the following ISO standards, as applicable: (1) ISO 9809-1: Gas cylinders—Refillable seamless steel...

Proceedings of a Meeting on Traceability for Ionizing Radiation Measurements

NASA Astrophysics Data System (ADS)

Heaton, H. T., II

1982-02-01

General concepts for traceability were presented from several perspectives. The national standards for radiation dosimetry, radioactivity measurements, and neutron measurements were described. Specific programs for achieving traceability to the national standards for radiation measurements in medical, occupational, and environmental applications were summarized.

40 CFR 600.301-95 - General applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... produce only electric vehicles are exempt from the requirement of this subpart, except with regard to the requirements in those sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide production (excluding electric vehicle production) of less than 10,000 gasoline-fueled and/or diesel powered...

15 CFR 8.4 - Discrimination prohibited.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1) A...

15 CFR 8.4 - Discrimination prohibited.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1) A...

15 CFR 8.4 - Discrimination prohibited.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1) A...

15 CFR 8.4 - Discrimination prohibited.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Discrimination prohibited. 8.4 Section... General Provisions; Prohibitions: Nondiscrimination Clause; Applicability to Programs § 8.4 Discrimination... discrimination under, any program to which this part applies. (b) Specific discriminatory acts prohibited. (1) A...

Photomultiplier tube reliability study for the HEAO program

NASA Technical Reports Server (NTRS)

Richardson, C.

1974-01-01

Results concerning the research on photomultiplier tubes required for the HEAO program are reported. The general specifications are discussed for providing a series of tests for helping the operational reliability of its application, and for permitting comparison of performance of similar types, from various manufacturers.

Application and Implications of Agent Technology for Librarians.

ERIC Educational Resources Information Center

Nardi, Bonnie A.; O'Day, Vicki L.

1998-01-01

Examines intelligent software agents, presents nine design principles aimed specifically at the technology perspective (to personalize task performance and general principles), and discusses what librarians can do that software agents (agents defined as activity-aware software programs) cannot do. Describes an information ecology that integrates…

40 CFR 600.301-95 - General applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... passenger automobiles and light trucks may optionally comply with the electric vehicle requirements in this... produce only electric vehicles are exempt from the requirement of this subpart, except with regard to the requirements in those sections pertaining specifically to electric vehicles. (2) Manufacturers with worldwide...

Quantitative non-destructive evaluation of composite materials based on ultrasonic wave propagation

NASA Technical Reports Server (NTRS)

Miller, J. G.

1986-01-01

The application and interpretation of specific ultrasonic nondestructive evaluation techniques are studied. The Kramers-Kronig or generalized dispersion relationships are applied to nondestructive techniques. Progress was made on an improved determination of material properties of composites inferred from elastic constant measurements.

A Tentative Application Of Morphological Filters To Time-Varying Images

NASA Astrophysics Data System (ADS)

Billard, D.; Poquillon, B.

1989-03-01

In this paper, morphological filters, which are commonly used to process either 2D or multidimensional static images, are generalized to the analysis of time-varying image sequence. The introduction of the time dimension induces then interesting prop-erties when designing such spatio-temporal morphological filters. In particular, the specification of spatio-temporal structuring ele-ments (equivalent to time-varying spatial structuring elements) can be adjusted according to the temporal variations of the image sequences to be processed : this allows to derive specific morphological transforms to perform noise filtering or moving objects discrimination on dynamic images viewed by a non-stationary sensor. First, a brief introduction to the basic principles underlying morphological filters will be given. Then, a straightforward gener-alization of these principles to time-varying images will be pro-posed. This will lead us to define spatio-temporal opening and closing and to introduce some of their possible applications to process dynamic images. At last, preliminary results obtained us-ing a natural forward looking infrared (FUR) image sequence are presented.

Natural gas applications for hybrid vehicles. Final report, October 1992-July 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bentley, J.M.

1993-08-01

Hybrid vehicle technology holds the potential for improved efficiency and emissions compared with internal combustion (IC) engines and improved range and refueling convenience over electric vehicles. This study evaluated the potential for using natural gas as a hybrid vehicle fuel. Potential regulatory and market drivers were evaluated for hybrids generally and natural gas hybrids in specific. Heat engine options and other configuration issues were investigated to determine efficiency, emissions or other benefits of light- and heavy-duty hybrids. Several hybrid vehicle configurations were evaluated to determine the specific packaging attributes of natural gas in a hybrid configuration. Generally, conventional IC enginesmore » appear adequate for most emissions-sensitive hybrid applications with no great advantage being gained from using turbines or other more advanced heat engines. The largest technology barrier to a near-term hybrid is the weight of available or near-term batteries. Smaller, light-duty hybrid vehicles will be more sensitive to this weight handicap than larger vehicles such as the urban transit bus.« less

Application of physics engines in virtual worlds

NASA Astrophysics Data System (ADS)

Norman, Mark; Taylor, Tim

2002-03-01

Dynamic virtual worlds potentially can provide a much richer and more enjoyable experience than static ones. To realize such worlds, three approaches are commonly used. The first of these, and still widely applied, involves importing traditional animations from a modeling system such as 3D Studio Max. This approach is therefore limited to predefined animation scripts or combinations/blends thereof. The second approach involves the integration of some specific-purpose simulation code, such as car dynamics, and is thus generally limited to one (class of) application(s). The third approach involves the use of general-purpose physics engines, which promise to enable a range of compelling dynamic virtual worlds and to considerably speed up development. By far the largest market today for real-time simulation is computer games, revenues exceeding those of the movie industry. Traditionally, the simulation is produced by game developers in-house for specific titles. However, off-the-shelf middleware physics engines are now available for use in games and related domains. In this paper, we report on our experiences of using middleware physics engines to create a virtual world as an interactive experience, and an advanced scenario where artificial life techniques generate controllers for physically modeled characters.

Lectins and their application to clinical microbiology.

PubMed Central

Slifkin, M; Doyle, R J

1990-01-01

Lectins are generally associated with plant or animal components, selectively bind carbohydrates, and interact with procaryotic and eucaryotic cells. Lectins have various specificities that are associated with their ability to interact with acetylaminocarbohydrates, aminocarbohydrates, sialic acids, hexoses, pentoses, and as other carbohydrates. Microbial surfaces generally contain many of the sugar residues that react with lectins. Lectins are presently used in the clinical laboratory to type blood cells and are used in a wide spectrum of applications, including, in part, as carriers of chemotherapeutic agents, as mitogens, for fractionation of animal cells, and for investigations of cellular surfaces. Numerous studies have shown that lectins can be used to identify rapidly certain microorganisms isolated from a clinical specimen or directly in a clinical specimen. Lectins have been demonstrated to be important diagnostic reagents in the major realms of clinical microbiology. Thus, they have been applied in bacteriology, mycology, mycobacteriology, and virology for the identification and/or differentiation of various microorganisms. Lectins have been used successfully as epidemiologic as well as taxonomic markers of specific microorganisms. Lectins provide the clinical microbiologist with cost-effective and potential diagnostic reagents. This review describes the applications of lectins in clinical microbiology. Images PMID:2200603

Magnetic Resonance Angiography Using Fresh Blood Imaging in Oral and Maxillofacial Regions

PubMed Central

Oda, Masafumi; Tanaka, Tatsurou; Kito, Shinji; Habu, Manabu; Kodama, Masaaki; Kokuryo, Shinya; Miyamoto, Ikuya; Yoshiga, Daigo; Yamauchi, Kensuke; Nogami, Shinnosuke; Wakasugi-Sato, Nao; Matsumoto-Takeda, Shinobu; Ishikawa, Ayataka; Nishida, Ikuko; Saeki, Katsura; Morikawa, Kazumasa; Matsuo, Kou; Seta, Yuji; Yamashita, Yoshihiro; Maki, Kenshi; Tominaga, Kazuhiro; Morimoto, Yasuhiro

2012-01-01

The present paper provides general dentists with an introduction to the clinical applications and significance of magnetic resonance angiography (MRA) in the oral and maxillofacial regions. Specifically, the method and characteristics of MRA are first explained using the relevant MR sequences. Next, clinical applications to the oral and maxillofacial regions, such as identification of hemangiomas and surrounding vessels by MRA, are discussed. Moreover, the clinical significance of MRA for other regions is presented to elucidate future clinical applications of MRA in the oral and maxillofacial regions. PMID:23118751

Performance Analysis of OFDM in Frequency Selective, Slowly Fading Nakagami Channels

DTIC Science & Technology

2001-12-01

starting with some background, then moving into how to generate an OFDM signal, and finally discussing the implementation of OFDM using one specific...application, the IEEE 802.11a standard. The application of some more general communications concepts such as the discrete Fourier transform (DFT...provide orthogonal cover to the sub-carriers, some may argue that the FFT’s complexity makes up for the loss of equalization complexity, however, as Ch

pysimm: A Python Package for Simulation of Molecular Systems

NASA Astrophysics Data System (ADS)

Fortunato, Michael; Colina, Coray

pysimm, short for python simulation interface for molecular modeling, is a python package designed to facilitate the structure generation and simulation of molecular systems through convenient and programmatic access to object-oriented representations of molecular system data. This poster presents core features of pysimm and design philosophies that highlight a generalized methodology for incorporation of third-party software packages through API interfaces. The integration with the LAMMPS simulation package is explained to demonstrate this methodology. pysimm began as a back-end python library that powered a cloud-based application on nanohub.org for amorphous polymer simulation. The extension from a specific application library to general purpose simulation interface is explained. Additionally, this poster highlights the rapid development of new applications to construct polymer chains capable of controlling chain morphology such as molecular weight distribution and monomer composition.

Program for the exploitation of unused NASA patents

NASA Technical Reports Server (NTRS)

Fay, R. J.

1972-01-01

The program to exploit unused NASA patents through the use of a multidisciplinary approach involving faculty students, and research staff is reported. NASA patents were screened for their applicability outside the space program, specific applications were identified, and the technical and commercial feasibility of these applications was established. Also application of this technology by governmental agencies outside the space program was sought. The program was specifically interested in energy absorbing devices such as those developed for lunar soft landings. These energy absorbing devices absorb large amounts of mechanical energy but are, in general, not reusable. Some of these devices can also operate as structural elements until their structural load capacity is exceeded and they become activated as energy absorbers. The capability of these devices to operate as structural elements and as energy absorbing devices makes them candidates for many applications in the fields of transportation and materials handling safety where accidents take a large toll in human injury and property damage.

Protein Engineering for Nicotinamide Coenzyme Specificity in Oxidoreductases: Attempts and Challenges.

PubMed

Chánique, Andrea M; Parra, Loreto P

2018-01-01

Oxidoreductases are ubiquitous enzymes that catalyze an extensive range of chemical reactions with great specificity, efficiency, and selectivity. Most oxidoreductases are nicotinamide cofactor-dependent enzymes with a strong preference for NADP or NAD. Because these coenzymes differ in stability, bioavailability and costs, the enzyme preference for a specific coenzyme is an important issue for practical applications. Different approaches for the manipulation of coenzyme specificity have been reported, with different degrees of success. Here we present various attempts for the switching of nicotinamide coenzyme preference in oxidoreductases by protein engineering. This review covers 103 enzyme engineering studies from 82 articles and evaluates the accomplishments in terms of coenzyme specificity and catalytic efficiency compared to wild type enzymes of different classes. We analyzed different protein engineering strategies and related them with the degree of success in inverting the cofactor specificity. In general, catalytic activity is compromised when coenzyme specificity is reversed, however when switching from NAD to NADP, better results are obtained. In most of the cases, rational strategies were used, predominantly with loop exchange generating the best results. In general, the tendency of removing acidic residues and incorporating basic residues is the strategy of choice when trying to change specificity from NAD to NADP, and vice versa . Computational strategies and algorithms are also covered as helpful tools to guide protein engineering strategies. This mini review aims to give a general introduction to the topic, giving an overview of tools and information to work in protein engineering for the reversal of coenzyme specificity.

Handling qualities criteria for the space shuttle orbiter during the terminal phase of flight

NASA Technical Reports Server (NTRS)

Stapleford, R. L.; Klein, R. H.; Hob, R. H.

1972-01-01

It was found that large portions of the military handling qualities specification are directly applicable. However a number of additional and substitute criteria are recommended for areas not covered or inadequately covered in the military specification. Supporting pilot/vehicle analyses and simulation experiments were conducted and are described. Results are also presented of analytical and simulator evaluations of three specific interim Orbiter designs which provided a test of the proposed handling qualities criteria. The correlations between the analytical and experimental evaluations were generally excellent.

Domain Specific Language Support for Exascale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mellor-Crummey, John

A multi-institutional project known as D-TEC (short for “Domain- specific Technology for Exascale Computing”) set out to explore technologies to support the construction of Domain Specific Languages (DSLs) to map application programs to exascale architectures. DSLs employ automated code transformation to shift the burden of delivering portable performance from application programmers to compilers. Two chief properties contribute: DSLs permit expression at a high level of abstraction so that a programmer’s intent is clear to a compiler and DSL implementations encapsulate human domain-specific optimization knowledge so that a compiler can be smart enough to achieve good results on specific hardware. Domainmore » specificity is what makes these properties possible in a programming language. If leveraging domain specificity is the key to keep exascale software tractable, a corollary is that many different DSLs will be needed to encompass the full range of exascale computing applications; moreover, a single application may well need to use several different DSLs in conjunction. As a result, developing a general toolkit for building domain-specific languages was a key goal for the D-TEC project. Different aspects of the D-TEC research portfolio were the focus of work at each of the partner institutions in the multi-institutional project. D-TEC research and development work at Rice University focused on on three principal topics: understanding how to automate the tuning of code for complex architectures, research and development of the Rosebud DSL engine, and compiler technology to support complex execution platforms. This report provides a summary of the research and development work on the D-TEC project at Rice University.« less

18 CFR 157.6 - Applications; general requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the pamphlet and indicate its availability at the Commission's Internet address; (iii) A description... local or toll-free phone number and a name of a specific person to contact who is knowledgeable about... Internet address and the telephone number for the Commission's Office of External Affairs; and (vi...

30 CFR 35.12 - Changes after certification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Changes after certification. 35.12 Section 35..., AND APPROVAL OF MINING PRODUCTS FIRE-RESISTANT HYDRAULIC FLUIDS General Provisions § 35.12 Changes after certification. If an applicant desires to change any specification or characteristic of a...

49 CFR 178.345-14 - Marking.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Specifications for Containers for Motor Vehicle Transportation § 178.345-14 Marking. (a) General. The manufacturer shall certify that each cargo tank motor vehicle has been designed, constructed and tested in....348) cargo tank requirements and, when applicable, with Section VIII of the ASME Code (IBR, see § 171...

Selection of species and sampling areas: The importance of inference

Treesearch

Paul Stephen Corn

2009-01-01

Inductive inference, the process of drawing general conclusions from specific observations, is fundamental to the scientific method. Platt (1964) termed conclusions obtained through rigorous application of the scientific method as "strong inference" and noted the following basic steps: generating alternative hypotheses; devising experiments, the...

The Formal Specification of a Visual display Device: Design and Implementation.

DTIC Science & Technology

1985-06-01

The use of these data structures with their defined operations, give the programmer a very powerful instructions set. Like the DPU code generator in...which any AM hosted machine could faithfully display. 27 In- general , most applications have no need to create images from a data structure representing...formation of standard functional interfaces to these resources. OS’s generally do not provide a functional interface to either the processor or the display2

Image correlation and sampling study

NASA Technical Reports Server (NTRS)

Popp, D. J.; Mccormack, D. S.; Sedwick, J. L.

1972-01-01

The development of analytical approaches for solving image correlation and image sampling of multispectral data is discussed. Relevant multispectral image statistics which are applicable to image correlation and sampling are identified. The general image statistics include intensity mean, variance, amplitude histogram, power spectral density function, and autocorrelation function. The translation problem associated with digital image registration and the analytical means for comparing commonly used correlation techniques are considered. General expressions for determining the reconstruction error for specific image sampling strategies are developed.

Bipolar Nickel-hydrogen Batteries for Aerospace Applications

NASA Technical Reports Server (NTRS)

Koehler, C. W.; Vanommering, G.; Puester, N. H.; Puglisi, V. J.

1984-01-01

A bipolar nickel-hydrogen battery which effectively addresses all key requirements for a spacecraft power system, including long-term reliability and low mass, is discussed. The design of this battery is discussed in the context of system requirements and nickel-hydrogen battery technology in general. To achieve the ultimate goal of an aerospace application of a bipolar Ni-H2 battery several objectives must be met in the design and development of the system. These objectives include: maximization of reliability and life; high specific energy and energy density; reasonable cost of manufacture, test, and integration; and ease in scaling for growth in power requirements. These basic objectives translate into a number of specific design requirements, which are discussed.

Cognitive predictors and age-based adverse impact among business executives.

PubMed

Klein, Rachael M; Dilchert, Stephan; Ones, Deniz S; Dages, Kelly D

2015-09-01

Age differences on measures of general mental ability and specific cognitive abilities were examined in 2 samples of job applicants to executive positions as well as a mix of executive/nonexecutive positions to determine which predictors might lead to age-based adverse impact in making selection and advancement decisions. Generalizability of the pattern of findings was also investigated in 2 samples from the general adult population. Age was negatively related to general mental ability, with older executives scoring lower than younger executives. For specific ability components, the direction and magnitude of age differences depended on the specific ability in question. Older executives scored higher on verbal ability, a measure most often associated with crystallized intelligence. This finding generalized across samples examined in this study. Also, consistent with findings that fluid abilities decline with age, older executives scored somewhat lower on figural reasoning than younger executives, and much lower on a letter series test of inductive reasoning. Other measures of inductive reasoning, such as Raven's Advanced Progressive Matrices, also showed similar age group mean differences across settings. Implications for employee selection and adverse impact on older job candidates are discussed. (c) 2015 APA, all rights reserved).

Addictive Potential of Internet Applications and Differential Correlates of Problematic Use in Internet Gamers versus Generalized Internet Users in a Representative Sample of Adolescents.

PubMed

Rosenkranz, Tabea; Müller, Kai W; Dreier, Michael; Beutel, Manfred E; Wölfling, Klaus

2017-01-01

This paper examines the addictive potential of 8 different Internet applications, distinguishing male and female users. Moreover, differential correlates of problematic use are investigated in Internet gamers (IG) and generalized Internet users (GIU). In a representative sample of 5,667 adolescents aged 12-19 years, use of Internet applications, problematic Internet use, psychopathologic symptoms (emotional problems, hyperactivity/inattention, and psychosomatic complaints), personality (conscientiousness and extraversion), psychosocial correlates (perceived stress and self-efficacy), and coping strategies were assessed. The addictive potential of Internet applications was examined in boys and girls using regression analysis. MANOVAs were conducted to examine differential correlates of problematic Internet use between IG and GIU. Chatting and social networking most strongly predicted problematic Internet use in girls, while gaming was the strongest predictor in boys. Problematic IG exhibited multiple psychosocial problems compared to non-problematic IG. In problematic Internet users, GIU reported even higher psychosocial burden and displayed dysfunctional coping strategies more frequently than gamers. The results extend previous findings on the addictive potential of Internet applications and validate the proposed distinction between specific and generalized problematic Internet use. In addition to Internet gaming disorder, future studies should also focus on other highly addictive Internet applications, that is, chatting or social networking, regarding differential correlates of problematic use. © 2017 S. Karger AG, Basel.

ALARA implementation throughout project life cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haynes, M.J.

1995-03-01

A strength of radiation protection programs generally has been endorsement and application of the ALARA principle. In Ontario Hydro, which currently operates 20 commercial size nuclear units, great strides have been made in the last three decades in reducing occupational radiation exposure per unit of electricity generated. This paper will discuss specific applications of elements of the overall ALARA program which have most contributed to dose reduction as the nuclear program has expanded. This includes such things as management commitment, ALARA application in the design phase and major rehabilitation work, the benefits of the self protection concept, a specific examplemore » of elimination (or reduction) of the source term and the importance of dose targets. Finally, it is concluded that the major opportunities for further improvements may lie in the area of information management.« less

The technology application process as applied to a firefighter's breathing system

NASA Technical Reports Server (NTRS)

Mclaughlan, P. B.

1974-01-01

The FBS Program indicated that applications of advanced technology can result in an improved FBS that will satisfy the requirements defined by municipal fire departments. To accomplish this technology transfer, a substantial commitment of resources over an extended period of time has been required. This program has indicated that the ability of NASA in terms of program management such as requirement definition, system analysis, and industry coordination may play as important a role as specific sources of hardware technology. As a result of the FBS program, a sequence of milestones was passed that may have applications as generalized milestones and objectives for any technical application program.

General Aviation Interior Noise. Part 2; In-Flight Source/Verification

NASA Technical Reports Server (NTRS)

Unruh, James F.; Till, Paul D.; Palumbo, Daniel L. (Technical Monitor)

2002-01-01

The technical approach made use of the Cessna Model 182E aircraft used in the previous effort as a test bed for noise control application. The present phase of the project reports on flight test results during application of various passive noise treatments in an attempt to verify the noise sources and paths for the aircraft. The data presented establishes the level of interior noise control that can be expected for various passive noise control applications within the aircraft cabin. Subsequent testing will address specific testing to demonstrate the technology available to meet a specified level of noise control by application of passive and/or active noise control technology.

Defining a Technical Basis for Comparing and Contrasting Emerging Dynamic Discovery Protocols

DTIC Science & Technology

2001-05-02

UPnP, SLP, Bluetooth , and HAVi • Projected specific UML models for Jini, UPnP, and SLP • Completed a Rapide Model of Jini structure, function, and...narrow application focus but targeting a different application domain. (e.g., HAVi, Salutation Consortium, and Bluetooth Service Discovery) • Sun has...Our General Approach? 1/31/2002 7 Particulars of Our Approach Define a Generic UML Model that Encompasses Jini, UPnP, SLP, HAVi, and Bluetooth

Applying Parallel Processing Techniques to Tether Dynamics Simulation

NASA Technical Reports Server (NTRS)

Wells, B. Earl

1996-01-01

The focus of this research has been to determine the effectiveness of applying parallel processing techniques to a sizable real-world problem, the simulation of the dynamics associated with a tether which connects two objects in low earth orbit, and to explore the degree to which the parallelization process can be automated through the creation of new software tools. The goal has been to utilize this specific application problem as a base to develop more generally applicable techniques.

An approach for access differentiation design in medical distributed applications built on databases.

PubMed

Shoukourian, S K; Vasilyan, A M; Avagyan, A A; Shukurian, A K

1999-01-01

A formalized "top to bottom" design approach was described in [1] for distributed applications built on databases, which were considered as a medium between virtual and real user environments for a specific medical application. Merging different components within a unified distributed application posits new essential problems for software. Particularly protection tools, which are sufficient separately, become deficient during the integration due to specific additional links and relationships not considered formerly. E.g., it is impossible to protect a shared object in the virtual operating room using only DBMS protection tools, if the object is stored as a record in DB tables. The solution of the problem should be found only within the more general application framework. Appropriate tools are absent or unavailable. The present paper suggests a detailed outline of a design and testing toolset for access differentiation systems (ADS) in distributed medical applications which use databases. The appropriate formal model as well as tools for its mapping to a DMBS are suggested. Remote users connected via global networks are considered too.

An Estimating Equations Approach for the LISCOMP Model.

ERIC Educational Resources Information Center

Reboussin, Beth A.; Liang, Kung-Lee

1998-01-01

A quadratic estimating equations approach for the LISCOMP model is proposed that only requires specification of the first two moments. This method is compared with a three-stage generalized least squares approach through a numerical study and application to a study of life events and neurotic illness. (SLD)

Bioluminescent bioreporter integrated circuit devices and methods for detecting ammonia

DOEpatents

Simpson, Michael L [Knoxville, TN; Paulus, Michael J [Knoxville, TN; Sayler, Gary S [Blaine, TN; Applegate, Bruce M [West Lafayette, IN; Ripp, Steven A [Knoxville, TN

2007-04-24

Monolithic bioelectronic devices for the detection of ammonia includes a microorganism that metabolizes ammonia and which harbors a lux gene fused with a heterologous promoter gene stably incorporated into the chromosome of the microorganism and an Optical Application Specific Integrated Circuit (OASIC). The microorganism is generally a bacterium.

29 CFR 780.212 - Hatchery employees working on farms.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Hatchery employees working on farms. 780.212 Section 780... STATEMENTS OF GENERAL POLICY OR INTERPRETATION NOT DIRECTLY RELATED TO REGULATIONS EXEMPTIONS APPLICABLE TO... Agriculture as It Relates to Specific Situations Hatchery Operations § 780.212 Hatchery employees working on...

42 CFR 405.2468 - Allowable costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Allowable costs. 405.2468 Section 405.2468 Public... Allowable costs. (a) Applicability of general Medicare principles. In determining whether and to what extent a specific type or item of cost is allowable, such as interest, depreciation, bad debts and owner...

Model for Characterizing and Creating Certificate Programs in Technology-Specific Areas,

DTIC Science & Technology

1996-05-01

the TOEFL for applicants whose first language is not English. • GRE general and subject test. • Demonstrated competency in <prerequisites for...least 2.75 • English competency as demonstrated by TOEFL • Competence in data structures • Introductory level course in software engineering Course

The Trouble with Legal Ethics.

ERIC Educational Resources Information Center

Simon, William H.

1991-01-01

The conceptions of legal ethics or professional responsibility as (1) disciplinary rules or codes; and (2) as the personal moralities of individual lawyers prevail. However, it is the application of general norms to specific circumstances through complex, creative judgment that is the ethical component of the ideal of legal professionalism. (MSE)

Multidimensional Measurement of Situational Interest in Physical Education: Application of Bifactor Exploratory Structural Equation Modeling

ERIC Educational Resources Information Center

Garn, Alex C.

2017-01-01

Multidimensional measurement is a common theme in motivation research because many constructs are conceptualized as having an overarching general factor (e.g., situational interest) and specific dimensions (e.g., attention demand, challenge, exploration intention, instant enjoyment, novelty). This review addresses current issues associated with…

Hypnosis and Language Learning.

ERIC Educational Resources Information Center

Hammerman, Myrna Lynn

A thorough investiqation is attempted of efforts to apply hypnosis and suggestive learning techniques to education in general and specifically to second language learning. Hypnosis is discussed in terms of its dangers, its definition, and its application. Included in this discussion is a comparison of auto- and hetero-hypnosis, an overview of the…

Interdisciplinary Instructional Reading Strategies: An Applied Application for Business Education

ERIC Educational Resources Information Center

Polkinghorne, Frederick W.; Bland, Zinna L.

2011-01-01

The contemporary workforce requires technical and reading skills (Shanahan & Shanahan, 2008; The Conference Board, Corporate Voices for Working Families, Partnership for 21st Century Skills, Society of Human Resource Management, 2006). Technical skills allow workers to perform specific workforce tasks, while reading skills are generally needed by…

47 CFR 1.734 - Specifications as to pleadings, briefs, and other documents; subscription.

Code of Federal Regulations, 2011 CFR

2011-10-01

... GENERAL PRACTICE AND PROCEDURE Complaints, Applications, Tariffs, and Reports Involving Common Carriers... good faith argument for the extension, modification, or reversal of existing law; and that it is not.... Upon showing of good cause, the Commission may waive the requirements of this paragraph. [53 FR 11855...

48 CFR 53.101 - Requirements for use of forms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... matter applicable to each form is addressed. The specific location of each requirement is identified in... forms. 53.101 Section 53.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS General 53.101 Requirements for use of forms. The requirements for use of...

It Takes a Community

ERIC Educational Resources Information Center

Weasmer, Jerie; Woods, Amelia Mays

2010-01-01

Modifying course plans to accommodate diverse learners seems simple in theory. However, when faced with specific applications, many teachers feel lost. In a school community, they need not feel alone. General classroom teachers have several sources of ongoing support available to help them extend their teaching repertoire to meet their students'…

Threshold exceedance risk assessment in complex space-time systems

NASA Astrophysics Data System (ADS)

Angulo, José M.; Madrid, Ana E.; Romero, José L.

2015-04-01

Environmental and health impact risk assessment studies most often involve analysis and characterization of complex spatio-temporal dynamics. Recent developments in this context are addressed, among other objectives, to proper representation of structural heterogeneities, heavy-tailed processes, long-range dependence, intermittency, scaling behavior, etc. Extremal behaviour related to spatial threshold exceedances can be described in terms of geometrical characteristics and distribution patterns of excursion sets, which are the basis for construction of risk-related quantities, such as in the case of evolutionary study of 'hotspots' and long-term indicators of occurrence of extremal episodes. Derivation of flexible techniques, suitable for both the application under general conditions and the interpretation on singularities, is important for practice. Modern risk theory, a developing discipline motivated by the need to establish solid general mathematical-probabilistic foundations for rigorous definition and characterization of risk measures, has led to the introduction of a variety of classes and families, ranging from some conceptually inspired by specific fields of applications, to some intended to provide generality and flexibility to risk analysts under parametric specifications, etc. Quantile-based risk measures, such as Value-at-Risk (VaR), Average Value-at-Risk (AVaR), and generalization to spectral measures, are of particular interest for assessment under very general conditions. In this work, we study the application of quantile-based risk measures in the spatio-temporal context in relation to certain geometrical characteristics of spatial threshold exceedance sets. In particular, we establish a closed-form relationship between VaR, AVaR, and the expected value of threshold exceedance areas and excess volumes. Conditional simulation allows us, by means of empirical global and local spatial cumulative distributions, the derivation of various statistics of practical interest, and subsequent construction of dynamic risk maps. Further, we study the implementation of static and dynamic spatial deformation under this setup, meaningful, among other aspects, for incorporation of heterogeneities and/or covariate effects, or consideration of external factors for risk measurement. We illustrate this approach though Environment and Health applications. This work is partially supported by grant MTM2012-32666 of the Spanish Ministry of Economy and Competitiveness (co-financed by FEDER).

A Small Acoustic Goniometer for General Purpose Research

PubMed Central

Pook, Michael L.; Loo, Sin Ming

2016-01-01

Understanding acoustic events and monitoring their occurrence is a useful aspect of many research projects. In particular, acoustic goniometry allows researchers to determine the source of an event based solely on the sound it produces. The vast majority of acoustic goniometry research projects used custom hardware targeted to the specific application under test. Unfortunately, due to the wide range of sensing applications, a flexible general purpose hardware/firmware system does not exist for this purpose. This article focuses on the development of such a system which encourages the continued exploration of general purpose hardware/firmware and lowers barriers to research in projects requiring the use of acoustic goniometry. Simulations have been employed to verify system feasibility, and a complete hardware implementation of the acoustic goniometer has been designed and field tested. The results are reported, and suggested areas for improvement and further exploration are discussed. PMID:27136563

Final Report, University Research Program in Robotics (URPR), Nuclear Facilities Clean-up

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tesar, Delbert; Kapoor, Chetan; Pryor, Mitch

This final report describes the research activity at the University of Texas at Austin with application to EM needs at DOE. This research activity is divided in to two major thrusts and contributes to the overall University Research Program in Robotics (URPR) thrust by providing mechanically oriented robotic solutions based on modularity and generalized software. These thrusts are also the core strengths of the UTA program that has a 40-year history in machine development, 30 years specifically devoted to robotics. Since 1975, much of this effort has been to establish the general analytical and design infrastructure for an open (modular)more » architecture of systems with many degrees of freedom that are able to satisfy a broad range of applications for future production machines. This work has coalesced from two principal areas: standardized actuators and generalized software.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kouzes, R.T.; Piilonen, L.; Schreiber, D.

Apple microcomputers have been combined with CAMAC to produce data acquisition systems used for a variety of applications at the Princeton Cyclotron Laboratory. Two specific implementations are discussed: a general one or two parameter MCA system and a specific eleven parameter system. A multiplicity of off-line experiments led to the need for these systems having data manipulation and control ability beyond that of low cost systems available commercially. A serial communications port allows for data transfer to the main computer for more complete analysis.

Modelling uncertainty with generalized credal sets: application to conjunction and decision

NASA Astrophysics Data System (ADS)

Bronevich, Andrey G.; Rozenberg, Igor N.

2018-01-01

To model conflict, non-specificity and contradiction in information, upper and lower generalized credal sets are introduced. Any upper generalized credal set is a convex subset of plausibility measures interpreted as lower probabilities whose bodies of evidence consist of singletons and a certain event. Analogously, contradiction is modelled in the theory of evidence by a belief function that is greater than zero at empty set. Based on generalized credal sets, we extend the conjunctive rule for contradictory sources of information, introduce constructions like natural extension in the theory of imprecise probabilities and show that the model of generalized credal sets coincides with the model of imprecise probabilities if the profile of a generalized credal set consists of probability measures. We give ways how the introduced model can be applied to decision problems.

The CDRH Helix-I: a physical evaluation.

PubMed

Gopal, M K; Cetas, T C

1990-01-01

The use of a resonant helical coil with predominantly axial electric fields for regional hyperthermia in the abdomen and pelvis is addressed. The Helix-I applicator, which consists of a three-turn, 36-cm-long, oval-wound helical coil measuring 60 and 43 cm along its major and minor axes, respectively, is described, and specific absorption rate (SAR) measurements for the device are reported. Measurements of the E-field are also described. Specific absorption patterns for the Helix, determined by transient temperature measurements using a gel phantom, and by E(2)-field scans using a liquid phantom, are in general agreement. The general agreement of electric power intensity distribution, inside and outside the phantom, with corresponding SAR distributions obtained from transient temperature data, ensures reliability of the distribution patterns. The E(2) contours provide a clear picture of hot and cold spots as well as the nature of the general distribution.

Textual Analysis of General Surgery Residency Personal Statements: Topics and Gender Differences.

PubMed

Ostapenko, Laura; Schonhardt-Bailey, Cheryl; Sublette, Jessica Walling; Smink, Douglas S; Osman, Nora Y

Applicants to US general surgery residency training programs submit standardized applications. Applicants use the personal statement to express their individual rationale for a career in surgery. Our research explores common topics and gender differences within the personal statements of general surgery applicants. We analyzed the electronic residency application service personal statements of 578 applicants (containing 3,82,405 words) from Liaison Committee on Medical Education-accredited medical schools to a single ACGME-accredited general surgery program using an automated textual analysis program to identify common topics and gender differences. Using a recursive algorithm, the program identified common words and clusters, grouping them into topic classes, which are internally validated. We identified and labeled 8 statistically significant topic classes through independent review: "my story," "the art of surgery," "clinical vignettes," "why I love surgery," "residency program characteristics," "working as a team," "academics and research," and "global health and policy." Although some classes were common to all applications, we also identified gender-specific differences. Notably, women were significantly more likely than men to be represented within the class of "working as a team." (p < 0.01) Furthermore, men were significantly more likely than women to be represented within the class of "clinical vignettes" (p < 0.01). Applying textual analysis to a national cohort, we identified common narrative topics in the personal statements of aspiring general surgeons, noting differences between the statements of men and women. Women were more likely to discuss surgery as a team endeavor while men were more likely to focus on the details of their surgical experiences. Our work mirrors what has been found in social psychology research on gender-based differences in how men and women communicate their career goals and aspirations in other competitive professional situations. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

An Explicit Linear Filtering Solution for the Optimization of Guidance Systems with Statistical Inputs

NASA Technical Reports Server (NTRS)

Stewart, Elwood C.

1961-01-01

The determination of optimum filtering characteristics for guidance system design is generally a tedious process which cannot usually be carried out in general terms. In this report a simple explicit solution is given which is applicable to many different types of problems. It is shown to be applicable to problems which involve optimization of constant-coefficient guidance systems and time-varying homing type systems for several stationary and nonstationary inputs. The solution is also applicable to off-design performance, that is, the evaluation of system performance for inputs for which the system was not specifically optimized. The solution is given in generalized form in terms of the minimum theoretical error, the optimum transfer functions, and the optimum transient response. The effects of input signal, contaminating noise, and limitations on the response are included. From the results given, it is possible in an interception problem, for example, to rapidly assess the effects on minimum theoretical error of such factors as target noise and missile acceleration. It is also possible to answer important questions regarding the effect of type of target maneuver on optimum performance.

Predicting the optoelectronic properties of nanowire films based on control of length polydispersity

NASA Astrophysics Data System (ADS)

Large, Matthew J.; Burn, Jake; King, Alice A.; Ogilvie, Sean P.; Jurewicz, Izabela; Dalton, Alan B.

2016-05-01

We demonstrate that the optoelectronic properties of percolating thin films of silver nanowires (AgNWs) are predominantly dependent upon the length distribution of the constituent AgNWs. A generalized expression is derived to describe the dependence of both sheet resistance and optical transmission on this distribution. We experimentally validate the relationship using ultrasonication to controllably vary the length distribution. These results have major implications where nanowire-based films are a desirable material for transparent conductor applications; in particular when application-specific performance criteria must be met. It is of particular interest to have a simple method to generalize the properties of bulk films from an understanding of the base material, as this will speed up the optimisation process. It is anticipated that these results may aid in the adoption of nanowire films in industry, for applications such as touch sensors or photovoltaic electrode structures.

Modeling of microjoule and millijoule energy LIDARs with PMT/SiPM/APD detectors: a sensitivity analysis.

PubMed

Agishev, Ravil

2018-05-10

This paper demonstrates a renewed concept and applications of the generalized methodology for atmospheric light detection and ranging (LIDAR) capability prediction as a continuation of a series of our previous works, where the dimensionless parameterization appeared as a tool for comparing systems of a different scale, design, and applications. The modernized concept applied to microscale and milliscale LIDARs with relatively new silicon photomultiplier detectors and traditional photomultiplier tube and avalanche photodiode detectors allowed prediction of the remote sensing instruments' performance and limitations. Such a generalized, uniform, and objective concept is applied for evaluation of the increasingly popular class of limited-energy LIDARs using the best optical detectors, operating on different targets (back-scatter or topographic, static or dynamic) and under intense sky background conditions. It can be used in the LIDAR community to compare different instruments and select the most suitable and effective ones for specific applications.

Immunologic applications of conditional gene modification technology in the mouse.

PubMed

Sharma, Suveena; Zhu, Jinfang

2014-04-02

Since the success of homologous recombination in altering mouse genome and the discovery of Cre-loxP system, the combination of these two breakthroughs has created important applications for studying the immune system in the mouse. Here, we briefly summarize the general principles of this technology and its applications in studying immune cell development and responses; such implications include conditional gene knockout and inducible and/or tissue-specific gene over-expression, as well as lineage fate mapping. We then discuss the pros and cons of a few commonly used Cre-expressing mouse lines for studying lymphocyte development and functions. We also raise several general issues, such as efficiency of gene deletion, leaky activity of Cre, and Cre toxicity, all of which may have profound impacts on data interpretation. Finally, we selectively list some useful links to the Web sites as valuable mouse resources. Copyright © 2014 John Wiley & Sons, Inc.

Feasibility study for a numerical aerodynamic simulation facility. Volume 2: Hardware specifications/descriptions

NASA Technical Reports Server (NTRS)

Green, F. M.; Resnick, D. R.

1979-01-01

An FMP (Flow Model Processor) was designed for use in the Numerical Aerodynamic Simulation Facility (NASF). The NASF was developed to simulate fluid flow over three-dimensional bodies in wind tunnel environments and in free space. The facility is applicable to studying aerodynamic and aircraft body designs. The following general topics are discussed in this volume: (1) FMP functional computer specifications; (2) FMP instruction specification; (3) standard product system components; (4) loosely coupled network (LCN) specifications/description; and (5) three appendices: performance of trunk allocation contention elimination (trace) method, LCN channel protocol and proposed LCN unified second level protocol.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buechler, Elizabeth D.; Pallin, Simon B.; Boudreaux, Philip R.

The indoor air temperature and relative humidity in residential buildings significantly affect material moisture durability, HVAC system performance, and occupant comfort. Therefore, indoor climate data is generally required to define boundary conditions in numerical models that evaluate envelope durability and equipment performance. However, indoor climate data obtained from field studies is influenced by weather, occupant behavior and internal loads, and is generally unrepresentative of the residential building stock. Likewise, whole-building simulation models typically neglect stochastic variables and yield deterministic results that are applicable to only a single home in a specific climate. The

Solar Occultation Retrieval Algorithm Development

NASA Technical Reports Server (NTRS)

Lumpe, Jerry D.

2004-01-01

This effort addresses the comparison and validation of currently operational solar occultation retrieval algorithms, and the development of generalized algorithms for future application to multiple platforms. initial development of generalized forward model algorithms capable of simulating transmission data from of the POAM II/III and SAGE II/III instruments. Work in the 2" quarter will focus on: completion of forward model algorithms, including accurate spectral characteristics for all instruments, and comparison of simulated transmission data with actual level 1 instrument data for specific occultation events.

Variance composition, measurement invariance by gender, and construct validity of the Femininity Ideology Scale-Short Form.

PubMed

Levant, Ronald F; Alto, Kathleen M; McKelvey, Daniel K; Richmond, Katherine A; McDermott, Ryon C

2017-11-01

The current study extended prior work on the Femininity Ideology Scale (FIS), a multidimensional measure of traditional femininity ideology (TFI), in several ways. First, we conducted exploratory factor and bifactor analyses, which revealed a general TFI factor and 3 specific factors: dependence/deference, purity, and emotionality/traditional roles. Second, based on these results we developed the 12-item FIS-Short Form (FIS-SF). Third, we assessed the FIS-SF using confirmatory factor analysis on a separate sample, finding that the items loaded on the general factor and 3 specific factors as hypothesized, and that the bifactor model fit better than common factors and unidimensional models. Fourth, model-based reliability estimates tentatively support the use of raw scores to represent the general TFI factor and the emotionality/traditional roles specific factor, but the other 2 specific factors are best measured using SEM or by ipsatizing their scores. Fifth, we assessed measurement invariance across 2 gender groups, finding evidence for configural invariance for all factors, and for partial metric invariance for the specific factors. Sixth, we found evidence for the convergent construct validity of the FIS-SF general factor and the emotionality/traditional roles specific factors by examining relationships with the latent variables of several constructs in the nomological network. The results are discussed in relationship to prior literature, future research directions, applications to counseling practice, and limitations. Data (N = 1,472, 907 women, 565 men, 530 people of color) were from community and college participants who responded to an online survey. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Self-Tuning of Design Variables for Generalized Predictive Control

NASA Technical Reports Server (NTRS)

Lin, Chaung; Juang, Jer-Nan

2000-01-01

Three techniques are introduced to determine the order and control weighting for the design of a generalized predictive controller. These techniques are based on the application of fuzzy logic, genetic algorithms, and simulated annealing to conduct an optimal search on specific performance indexes or objective functions. Fuzzy logic is found to be feasible for real-time and on-line implementation due to its smooth and quick convergence. On the other hand, genetic algorithms and simulated annealing are applicable for initial estimation of the model order and control weighting, and final fine-tuning within a small region of the solution space, Several numerical simulations for a multiple-input and multiple-output system are given to illustrate the techniques developed in this paper.

Application of time dependent Green's function method to scattering of elastic waves in anisotropic solids

NASA Astrophysics Data System (ADS)

Tewary, Vinod K.; Fortunko, Christopher M.

The present, time-dependent 3D Green's function method resembles that used to study the propagation of elastic waves in a general, anisotropic half-space in the lattice dynamics of crystals. The method is used to calculate the scattering amplitude of elastic waves from a discontinuity in the half-space; exact results are obtained for 3D pulse propagation in a general, anisotropic half-space that contains either an interior point or a planar scatterer. The results thus obtained are applicable in the design of ultrasonic scattering experiments, especially as an aid in the definition of the spatial and time-domain transducer responses that can maximize detection reliability for specific categories of flaws in highly anisotropic materials.

The role of HiPPI switches in mass storage systems: A five year prospective

NASA Technical Reports Server (NTRS)

Gilbert, T. A.

1992-01-01

New standards are evolving which provide the foundation for novel multi-gigabit per second data communication structures. The lowest layer protocols are so generalized that they encourage a wide range of application. Specifically, the ANSI High Performance Parallel Interface (HiPPI) is being applied to computer peripheral attachment as well as general data communication networks. This paper introduces the HiPPI standards suite and technology products which incorporate the standards. The use of simple HiPPI crosspoint switches to build potentially complex extended 'fabrics' is discussed in detail. Several near term applications of the HiPPI technology are briefly described with additional attention to storage systems. Finally, some related standards are mentioned which may further expand the concepts above.

The role of HiPPI switches in mass storage systems: A five year prospective

NASA Technical Reports Server (NTRS)

Gilbert, T. A.

1991-01-01

New standards are evolving which provide the foundation for multi-gigabit per second data communication structures. The lowest layer protocols are so generalized that they encourage a wide range of application. Specifically, the ANSI High Performance Parallel Interface (HiPPI) is being applied to computer peripheral attachment as well as general data communication networks. The HiPPI Standards suite and technology products which incorporate the standards are introduced. The use of simple HiPPI crosspoint switches to build potentially complex extended 'fabrics' is discussed in detail. Several near term applications of the HiPPI technology are briefly described with additional attention to storage systems. Finally, some related standards are mentioned which may further expand the concepts above.

TEMPS-A[p] temperament profile related to professional choice: A study in 1548 applicants to become a cadet officer in the Italian air force.

PubMed

Maremmani, Icro; Dell'Osso, Liliana; Rovai, Luca; Pacini, Matteo; Arduino, Gualberto; Montagnari, Antonio; Abbenante, Domenico; Maremmani, Angelo G I; Giulio, Perugi; Akiskal, Kareen; Akiskal, Hagop

2010-08-01

Temperaments have been described with respect to their adaptive roles. Thus, depressive traits seem to increase sensitivity to suffering, cyclothymic traits appear relevant to creativity, and hyperthymic traits have been implicated in territoriality and leadership and more generally in active pursuits. The temperaments of 1548 candidates applying to become a cadet officer in the Italian air force, who had taken the 2005 entrance examination, were compared with deviant and non-deviant peers. At a psychological level, we also compared those who had applied to become a cadet officer with other applicants who had failed in a previous entrance examination and with applicants who had passed or failed to pass the specific psychological entrance examination. Applicants who took the entrance examination are more hyperthymic than their peers, regardless of any concurrent psychosocial deviance (i.e. drug addiction). The specificity of this correlation is confirmed by the fact that applicants who made a second attempt to pass the entrance examination after an initial failure were more hyperthymic than first-time applicants. Similarly, success in specific psychological admission tests is related to the same temperamental profiles, since those who prove to be psychologically fit are more hyperthymic. The inverse relationship emerges from an examination of other temperamental scales, which are better represented in controls (non-applicants), or other applicants making their first attempt at admission, or those who were excluded due to psychological flaws. In the present study, extremely high scores on the hyperthymic scale combined with extremely low ones in the cyclothymic scale seem to correspond to the specific temperament profile and to the highest likelihood of success in those applying to become a cadet officer in the Italian air force. Copyright 2010 Elsevier B.V. All rights reserved.

Introduction to Remote Sensing Image Registration

NASA Technical Reports Server (NTRS)

Le Moigne, Jacqueline

2017-01-01

For many applications, accurate and fast image registration of large amounts of multi-source data is the first necessary step before subsequent processing and integration. Image registration is defined by several steps and each step can be approached by various methods which all present diverse advantages and drawbacks depending on the type of data, the type of applications, the a prior information known about the data and the type of accuracy that is required. This paper will first present a general overview of remote sensing image registration and then will go over a few specific methods and their applications

Protein Engineering for Nicotinamide Coenzyme Specificity in Oxidoreductases: Attempts and Challenges

PubMed Central

Chánique, Andrea M.; Parra, Loreto P.

2018-01-01

Oxidoreductases are ubiquitous enzymes that catalyze an extensive range of chemical reactions with great specificity, efficiency, and selectivity. Most oxidoreductases are nicotinamide cofactor-dependent enzymes with a strong preference for NADP or NAD. Because these coenzymes differ in stability, bioavailability and costs, the enzyme preference for a specific coenzyme is an important issue for practical applications. Different approaches for the manipulation of coenzyme specificity have been reported, with different degrees of success. Here we present various attempts for the switching of nicotinamide coenzyme preference in oxidoreductases by protein engineering. This review covers 103 enzyme engineering studies from 82 articles and evaluates the accomplishments in terms of coenzyme specificity and catalytic efficiency compared to wild type enzymes of different classes. We analyzed different protein engineering strategies and related them with the degree of success in inverting the cofactor specificity. In general, catalytic activity is compromised when coenzyme specificity is reversed, however when switching from NAD to NADP, better results are obtained. In most of the cases, rational strategies were used, predominantly with loop exchange generating the best results. In general, the tendency of removing acidic residues and incorporating basic residues is the strategy of choice when trying to change specificity from NAD to NADP, and vice versa. Computational strategies and algorithms are also covered as helpful tools to guide protein engineering strategies. This mini review aims to give a general introduction to the topic, giving an overview of tools and information to work in protein engineering for the reversal of coenzyme specificity. PMID:29491854

Application of bacteriophages in post-harvest control of human pathogenic and food spoiling bacteria.

PubMed

Pérez Pulido, Rubén; Grande Burgos, Maria José; Gálvez, Antonio; Lucas López, Rosario

2016-10-01

Bacteriophages have attracted great attention for application in food biopreservation. Lytic bacteriophages specific for human pathogenic bacteria can be isolated from natural sources such as animal feces or industrial wastes where the target bacteria inhabit. Lytic bacteriophages have been tested in different food systems for inactivation of main food-borne pathogens including Listeria monocytogenes, Staphylococcus aureus, Escherichia coli O157:H7, Salmonella enterica, Shigella spp., Campylobacter jejuni and Cronobacter sakazkii, and also for control of spoilage bacteria. Application of lytic bacteriophages could selectively control host populations of concern without interfering with the remaining food microbiota. Bacteriophages could also be applied for inactivation of bacteria attached to food contact surfaces or grown as biofilms. Bacteriophages may receive a generally recognized as safe status based on their lack of toxicity and other detrimental effects to human health. Phage preparations specific for L. monocytogenes, E. coli O157:H7 and S. enterica serotypes have been commercialized and approved for application in foods or as part of surface decontamination protocols. Phage endolysins have a broader host specificity compared to lytic bacteriophages. Cloned endolysins could be used as natural preservatives, singly or in combination with other antimicrobials such as bacteriocins.

Use of multicriteria analysis (MCA) for sustainable hydropower planning and management.

PubMed

Vassoney, Erica; Mammoliti Mochet, Andrea; Comoglio, Claudio

2017-07-01

Multicriteria analysis (MCA) is a decision-making tool applied to a wide range of environmental management problems, including renewable energy planning and management. An interesting field of application of MCA is the evaluation and analysis of the conflicting aspects of hydropower (HP) exploitation, affecting the three pillars of sustainability and involving several different stakeholders. The present study was aimed at reviewing the state of the art of MCA applications to sustainable hydropower production and related decision-making problems, based on a detailed analysis of the scientific papers published over the last 15 years on this topic. The papers were analysed and compared, focusing on the specific features of the MCA methods applied in the described case studies, highlighting the general aspects of the MCA application (purpose, spatial scale, software used, stakeholders, etc.) and the specific operational/technical features of the selected MCA technique (methodology, criteria, evaluation, approach, sensitivity, etc.). Some specific limitations of the analysed case studies were identified and a set of "quality indexes" of an exhaustive MCA application were suggested as potential improvements for more effectively support decision-making processes in sustainable HP planning and management problems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Silicon micromachined vibrating gyroscopes

NASA Astrophysics Data System (ADS)

Voss, Ralf

1997-09-01

This work gives an overview of silicon micromachined vibrating gyroscopes. Market perspectives and fields of application are pointed out. The advantage of using silicon micromachining is discussed and estimations of the desired performance, especially for automobiles are given. The general principle of vibrating gyroscopes is explained. Vibrating silicon gyroscopes can be divided into seven classes. for each class the characteristic principle is presented and examples are given. Finally a specific sensor, based on a tuning fork for automotive applications with a sensitivity of 250(mu) V/degrees is described in detail.

Context-aware system design

NASA Astrophysics Data System (ADS)

Chan, Christine S.; Ostertag, Michael H.; Akyürek, Alper Sinan; Šimunić Rosing, Tajana

2017-05-01

The Internet of Things envisions a web-connected infrastructure of billions of sensors and actuation devices. However, the current state-of-the-art presents another reality: monolithic end-to-end applications tightly coupled to a limited set of sensors and actuators. Growing such applications with new devices or behaviors, or extending the existing infrastructure with new applications, involves redesign and redeployment. We instead propose a modular approach to these applications, breaking them into an equivalent set of functional units (context engines) whose input/output transformations are driven by general-purpose machine learning, demonstrating an improvement in compute redundancy and computational complexity with minimal impact on accuracy. In conjunction with formal data specifications, or ontologies, we can replace application-specific implementations with a composition of context engines that use common statistical learning to generate output, thus improving context reuse. We implement interconnected context-aware applications using our approach, extracting user context from sensors in both healthcare and grid applications. We compare our infrastructure to single-stage monolithic implementations with single-point communications between sensor nodes and the cloud servers, demonstrating a reduction in combined system energy by 22-45%, and multiplying the battery lifetime of power-constrained devices by at least 22x, with easy deployment across different architectures and devices.

Designing multifunctional quantum dots for bioimaging, detection, and drug delivery

PubMed Central

Zrazhevskiy, Pavel; Sena, Mark; Gao, Xiaohu

2011-01-01

The emerging field of bionanotechnology aims at revolutionizing biomedical research and clinical practice via introduction of nanoparticle-based tools, expanding capabilities of existing investigative, diagnostic, and therapeutic techniques as well as creating novel instruments and approaches for addressing challenges faced by medicine. Quantum dots (QDs), semiconductor nanoparticles with unique photo-physical properties, have become one of the dominant classes of imaging probes as well as universal platforms for engineering of multifunctional nanodevices. Possessing versatile surface chemistry and superior optical features, QDs have found initial use in a variety of in vitro and in vivo applications. However, careful engineering of QD probes guided by application-specific design criteria is becoming increasingly important for successful transition of this technology from proof-of-concept studies towards real-life clinical applications. This review outlines the major design principles and criteria, from general ones to application-specific, governing the engineering of novel QD probes satisfying the increasing demands and requirements of nanomedicine and discusses the future directions of QD-focused bionanotechnology research (critical review, 201 references). PMID:20697629

Portable Diagnostics Technology Assessment for Space Missions. Part 1; General Technology Capabilities for NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Nelson, Emily S.; Chait, Arnon

2010-01-01

The changes in the scope of NASA s mission in the coming decade are profound and demand nimble, yet insightful, responses. On-board clinical and environmental diagnostics must be available for both mid-term lunar and long-term Mars exploration missions in an environment marked by scarce resources. Miniaturization has become an obvious focus. Despite solid achievements in lab-based devices, broad-based, robust tools for application in the field are not yet on the market. The confluence of rapid, wide-ranging technology evolution and internal planning needs are the impetus behind this work. This report presents an analytical tool for the ongoing evaluation of promising technology platforms based on mission- and application-specific attributes. It is not meant to assess specific devices, but rather to provide objective guidelines for a rational down-select of general categories of technology platforms. In this study, we have employed our expertise in the microgravity operation of fluidic devices, laboratory diagnostics for space applications, and terrestrial research in biochip development. A rating of the current state of technology development is presented using the present tool. Two mission scenarios are also investigated: a 30-day lunar mission using proven, tested technology in 5 years; and a 2- to 3-year mission to Mars in 10 to 15 years.

Occupational health and safety regulations in the dairy industry.

PubMed

Reed, Sue; Douphrate, David I; Lundqvist, Peter; Jarvie, Paul; McLean, Gillian; Koehncke, Niels; Colosio, Claudio; Singh, Tanusha

2013-01-01

The application of occupational health and safety (OHS) legislation in the dairy industry varies throughout the world. Generally there is no specific OHS legislation that applies to the dairy industry and mostly in countries the current OHS legislation applies to all workplaces with specific guidelines that apply to agricultural industries. The main difference between countries is in the application of OHS legislation specifically in relation to the size of the farms. In the USA, the OHS legislation, and therefore enforcement, does not, in most cases, apply to farms with less than 11 employees, whereas in other countries there is no minimum number of employees and in some cases such as the United Kingdom and Australia it covers all people who work on the farm. The other area of difference is in the use and publication of guidelines for the industry; some countries have a wide range of guidelines whereas other counties have few. Generally, this relates to the jurisdiction of the OHS legislation, which in several countries is not at a national level such as USA, Canada, and Australia. The main principal of OHS legislation is that all workplaces, including dairy farms, should be a safe and healthy place to work, and does not vary significantly between the countries reviewed even those with prescriptive legislation.

Block 4 solar cell module design and test specification for residential applications

NASA Technical Reports Server (NTRS)

1978-01-01

Near-term design, qualification and acceptance requirements are provided for terrestrial solar cell modules suitable for incorporation in photovoltaic power sources (2 kW to 10 kW) applied to single family residential installations. Requirement levels and recommended design limits for selected performance criteria are specified for modules intended principally for rooftop installations. Modules satisfying the requirements of this specification fall into one of two categories, residential panel or residential shingle, both meeting general performance requirements plus additional category peculiar constraints.

The programming language HAL: A specification

NASA Technical Reports Server (NTRS)

1971-01-01

HAL accomplishes three significant objectives: (1) increased readability, through the use of a natural two-dimensional mathematical format; (2) increased reliability, by providing for selective recognition of common data and subroutines, and by incorporating specific data-protect features; (3) real-time control facility, by including a comprehensive set of real-time control commands and signal conditions. Although HAL is designed primarily for programming on-board computers, it is general enough to meet nearly all the needs in the production, verification and support of aerospace, and other real-time applications.

Development of standardized specifications for screening space level integrated circuits and semiconductors

NASA Technical Reports Server (NTRS)

1984-01-01

Standardized methods are established for screening of JAN B microcircuits and JANTXV semiconductor components for space mission or other critical applications when JAN S devices are not available. General specifications are provided which outline the DPA (destructive physical analysis), environmental, electrical, and data requirements for screening of various component technologies. This standard was developed for Air Force Space Division, and is available for use by other DOD agencies, NASA, and space systems contractors for establishing common screening methods for electronic components.

Mobile Application Removes Societal Barriers to P4 Medicine.

PubMed

Michel, J-P

2017-01-01

The overlap between one innovative paradigm (P4 medicine: predictive, personalized, participatory and preventive) and another (a new definition of "Healthy ageing") is fertile ground for new technologies; a new mobile application (app) that could broaden our scientific knowledge of the ageing process and help us to better analyse the impact of possible interventions in slowing the ageing decline. A novel mobile application is here presented as a game including questions and tests will allow in 10 minutes the assessment of the following domains: robustness, flexibility (lower muscle strength), balance, mental and memory complaints, semantic memory and visual retention. This game is completed by specific measurements, which could allow establishing precise information on functional and cognitive abilities. A global evaluation precedes advice and different types of exercises. The repetition of the tests and measures will allow a long follow up of the individual performances which could be shared (on specific request) with family members and general practitioners.

Automated interferometric alignment system for paraboloidal mirrors

DOEpatents

Maxey, L. Curtis

1993-01-01

A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aigning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront.

Automated interferometric alignment system for paraboloidal mirrors

DOEpatents

Maxey, L.C.

1993-09-28

A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aligning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront. 14 figures.

Results of Long Term Life Tests of Large Scale Lithium-Ion Cells

NASA Astrophysics Data System (ADS)

Inoue, Takefumi; Imamura, Nobutaka; Miyanaga, Naozumi; Yoshida, Hiroaki; Komada, Kanemi

2008-09-01

High energy density Li-ion cells have been introduced to latest satellites and another space usage. We have started development of large scale Li-ion cells for space applications in 1997. The chemical design was fixed in 1999.It is very important to confirm life performance to apply satellite applications because it requires long mission life such as 15 years for GEO and 5 to 7 years for LEO. Therefore we started life test at various conditions. And the tests have reached 8 to 9 years in actual calendar time. Semi - accelerated GEO tests which gives both calendar and cycle loss have been reached 42 season that corresponds 21 years in orbit. The specific energy range is 120 - 130 Wh/kg at EOL. According to the test results, we have confirmed that our Li-ion cell meets general requirements for space application such as GEO and LEO with quite high specific energy.

Acoustooptic linear algebra processors - Architectures, algorithms, and applications

NASA Technical Reports Server (NTRS)

Casasent, D.

1984-01-01

Architectures, algorithms, and applications for systolic processors are described with attention to the realization of parallel algorithms on various optical systolic array processors. Systolic processors for matrices with special structure and matrices of general structure, and the realization of matrix-vector, matrix-matrix, and triple-matrix products and such architectures are described. Parallel algorithms for direct and indirect solutions to systems of linear algebraic equations and their implementation on optical systolic processors are detailed with attention to the pipelining and flow of data and operations. Parallel algorithms and their optical realization for LU and QR matrix decomposition are specifically detailed. These represent the fundamental operations necessary in the implementation of least squares, eigenvalue, and SVD solutions. Specific applications (e.g., the solution of partial differential equations, adaptive noise cancellation, and optimal control) are described to typify the use of matrix processors in modern advanced signal processing.

10 CFR 2.322 - Special assistants to the presiding officer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Special assistants to the presiding officer. 2.322 Section 2.322 Energy NUCLEAR REGULATORY COMMISSION RULES OF PRACTICE FOR DOMESTIC LICENSING PROCEEDINGS AND ISSUANCE OF ORDERS Rules of General Applicability: Hearing Requests, Petitions To Intervene, Availability of Documents, Selection of Specific Hearin...

CREATING A DECISION CONTEXT FOR COMPARATIVE ANALYSIS AND CONSISTENT APPLICATION OF INHALATION DOSIMETRY MODELS IN CHILDREN'S RISK ASSESSMENT

EPA Science Inventory

Estimation of risks to children from exposure to airborne pollutants is often complicated by the lack of reliable epidemiological data specific to this age group. As a result, risks are generally estimated from extrapolations based on data obtained in other human age groups (e.g....

If a Marketer Teaches Ethics, Is There Still a Sound? The Interdisciplinary Case

ERIC Educational Resources Information Center

Murrow, Jim

2006-01-01

When a marketer teaches general ethics courses, widespread ontological shock can result on campus. A case for positive paradigm expansion of all involved persons in an interdisciplinary environment is made. Suggestions for specific interdisciplinary opportunities and applications are provided. A call for interdisciplinary efforts is made and…

10 CFR 1004.7 - Responses by authorizing officials: Form and content.

Code of Federal Regulations, 2010 CFR

2010-01-01

....7 Section 1004.7 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) FREEDOM OF INFORMATION § 1004.7... this Regulation, the Freedom of Information Act, and where the applicable fees are $15 or less or where... denial, containing a reference to the specific exemption under the Freedom of Information Act authorizing...

7 CFR Exhibit C to Subpart A of... - Guide for Drawings and Specifications

Code of Federal Regulations, 2010 CFR

2010-01-01

... and related facilities and, as applicable, farm housing and farm service buildings. I. General The... buildings or extensive rehabilitation, alterations or additions to existing buildings. Descriptions of work for minor alterations or repairs need pertain only to work to be done and may be in narrative form...

7 CFR Exhibit C to Subpart A of... - Guide for Drawings and Specifications

Code of Federal Regulations, 2011 CFR

2011-01-01

... and related facilities and, as applicable, farm housing and farm service buildings. I. General The... buildings or extensive rehabilitation, alterations or additions to existing buildings. Descriptions of work for minor alterations or repairs need pertain only to work to be done and may be in narrative form...

7 CFR Exhibit C to Subpart A of... - Guide for Drawings and Specifications

Code of Federal Regulations, 2014 CFR

2014-01-01

... and related facilities and, as applicable, farm housing and farm service buildings. I. General The... buildings or extensive rehabilitation, alterations or additions to existing buildings. Descriptions of work for minor alterations or repairs need pertain only to work to be done and may be in narrative form...

7 CFR Exhibit C to Subpart A of... - Guide for Drawings and Specifications

Code of Federal Regulations, 2013 CFR

2013-01-01

... and related facilities and, as applicable, farm housing and farm service buildings. I. General The... buildings or extensive rehabilitation, alterations or additions to existing buildings. Descriptions of work for minor alterations or repairs need pertain only to work to be done and may be in narrative form...

7 CFR Exhibit C to Subpart A of... - Guide for Drawings and Specifications

Code of Federal Regulations, 2012 CFR

2012-01-01

... and related facilities and, as applicable, farm housing and farm service buildings. I. General The... buildings or extensive rehabilitation, alterations or additions to existing buildings. Descriptions of work for minor alterations or repairs need pertain only to work to be done and may be in narrative form...

49 CFR Appendix to Subpart G of... - Required Knowledge and Skills-Sample Guidelines

Code of Federal Regulations, 2010 CFR

2010-10-01

... knowledge and skills tests that it administers to CDL applicants. This appendix closely follows the... discretion provided their CDL program tests for the general areas of knowledge and skill specified in §§ 383.111 and 383.113. Examples of specific knowledge elements (a) Safe operations regulations. Driver...

76 FR 39927 - Order Granting Temporary Exemptions Under the Securities Exchange Act of 1934 in Connection With...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... generally subject to certain antifraud and anti-manipulation provisions under the Exchange Act. This is... specific antifraud and anti-manipulation provisions (including Exchange Act section 10(b)).\\25\\ Accordingly... application of those Exchange Act antifraud and anti-manipulation provisions, as well as Securities Act...

42 CFR 441.11 - Continuation of FFP for institutional services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false Continuation of FFP for institutional services. 441.11 Section 441.11 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES General Provisions § 441.11...

42 CFR 441.11 - Continuation of FFP for institutional services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Continuation of FFP for institutional services. 441.11 Section 441.11 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES General Provisions § 441.11...

42 CFR 441.11 - Continuation of FFP for institutional services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Continuation of FFP for institutional services. 441.11 Section 441.11 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES General Provisions § 441.11...

77 FR 12853 - Draft Guidances Relating to the Development of Biosimilar Products; Public Hearing; Request for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

... Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 51, Rm. 6340, Silver... the review of 351(k) applications and general scientific principles in conducting comparative analyses... specific, on the scientific considerations, Q&A, and quality considerations draft guidances. For example...

MPD thruster application study

NASA Technical Reports Server (NTRS)

1981-01-01

Developmental considerations for the magneto-plasma-dynamic (MPD) thruster are defined. General characteristics of an MPD engine are compared to those of chemical propulsion and ion bombardment engines and performance criteria which are mission specific are examined. Requirements for thruster ground testing facilities are discussed and the utilization of the space shuttle for an orbital flight test is addressed.

Generating Nonnormal Multivariate Data Using Copulas: Applications to SEM

ERIC Educational Resources Information Center

Mair, Patrick; Satorra, Albert; Bentler, Peter M.

2012-01-01

This article develops a procedure based on copulas to simulate multivariate nonnormal data that satisfy a prespecified variance-covariance matrix. The covariance matrix used can comply with a specific moment structure form (e.g., a factor analysis or a general structural equation model). Thus, the method is particularly useful for Monte Carlo…

Reflections on the Elusive Promise of Religious Freedom for the Native American Church.

ERIC Educational Resources Information Center

Moore, Steven C.

1991-01-01

Analyzes the April 1990 Supreme Court decision that a member of a religion may not challenge, under the First Amendment free exercise clause, a generally applicable criminal law that infringes on a specific religious practice. Discusses political and legal implications for the Native American Church and other minority religions. (SV)

76 FR 18801 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses Involving No...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-05

.../petitioner shall provide a brief explanation of the bases for the contention and a concise statement of the.... The fuel rod design bases are established to satisfy the general and specific safety criteria..., ``Primary Containment Isolation Instrumentation,'' by deleting channel check Surveillance Requirement 3.3.6...

Suggestions for Evaluating the Quality of the Army’s Science and Technology Program: The Portfolio and Its Execution

DTIC Science & Technology

2013-01-01

definition of 6.1 research apply. Namely, the work is curiosity work with no specific application in mind. The two extramural categories include...direct interest in relativity and gravitation, cosmology , elementary particles, nuclear physics, astronomy, or astrophysics, since they generally have

47 CFR 15.611 - General technical requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... spectrum by licensed services. These techniques may include adaptive or “notch” filtering, or complete... frequencies below 30 MHz, when a notch filter is used to avoid interference to a specific frequency band, the... below the applicable part 15 limits. (ii) For frequencies above 30 MHz, when a notch filter is used to...

Detection of Misconceptions about Colour and an Experimentally Tested Proposal to Combat Them

ERIC Educational Resources Information Center

Martinez-Borreguero, Guadalupe; Perez-Rodriguez, Angel Luis; Suero-Lopez, Maria Isabel; Pardo-Fernandez, Pedro Jose

2013-01-01

We study the misconceptions about colour that most people hold, determining the general phenomenological laws that govern them. Concept mapping was used to combat the misconceptions which were found in the application of a test specifically designed to determine these misconceptions, while avoiding the possible misleading inductions that could…

Logical Aspects of Question-Answering by Computer.

ERIC Educational Resources Information Center

Kuhns, J. L.

The problem of computerized question-answering is discussed in this paper from the point of view of certain technical, although elementary, notions of logic. Although the work reported herein has general application to the design of information systems, it is specifically motivated by the RAND Relational Data File. This system, for which a…

Animal Traction. Appropriate Technologies for Development. Manual M-12.

ERIC Educational Resources Information Center

Watson, Peter R.

This manual is designed for use by Peace Corps volunteers and agricultural extension personnel working in animal traction development programs. While some of the information contained in the manual is specific to the extension of animal-powered agriculture in Africa, the principles covered are generally applicable wherever the method is being used…

75 FR 75464 - Notice of Public Information Collection(s) Being Reviewed by the Federal Communications...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-03

... type of switch software) to provide payphone specific coding digits for per-call compensation. The... Information; [cir] RF Exposure Information; [cir] Operational Description; [cir] Cover Letters; [cir] Software Defined Radio/Cognitive Radio Files In general, an applicant's submission is as follows: (a) FCC Form 731...

Precautionary Principles: General Definitions and Specific Applications to Genetically Modified Organisms

ERIC Educational Resources Information Center

Lofstedt, Ragnar E.; Fischhoff, Baruch; Fischhoff, Ilya R.

2002-01-01

Precautionary principles have been proposed as a fundamental element of sound risk management. Their advocates see them as guiding action in the face of uncertainty, encouraging the adoption of measures that reduce serious risks to health, safety, and the environment. Their opponents may reject the very idea of precautionary principles, find…

Statistical Modeling of the Individual: Rationale and Application of Multivariate Stationary Time Series Analysis

ERIC Educational Resources Information Center

Hamaker, Ellen L.; Dolan, Conor V.; Molenaar, Peter C. M.

2005-01-01

Results obtained with interindividual techniques in a representative sample of a population are not necessarily generalizable to the individual members of this population. In this article the specific condition is presented that must be satisfied to generalize from the interindividual level to the intraindividual level. A way to investigate…

Theoretical Foundation and Practical Application of a Schematic Approach to College Learning.

ERIC Educational Resources Information Center

Charry, Myrna; Morton, Elaine

To help students organize and integrate new information with past knowledge, college reading teachers can offer students cognitive schemata that sort information into general and specific concepts. Without this ability, students will be unable to comprehend, analyze, synthesize, interpret, or transfer information. In addition, they will be unable…

A human factors methodology for real-time support applications

NASA Technical Reports Server (NTRS)

Murphy, E. D.; Vanbalen, P. M.; Mitchell, C. M.

1983-01-01

A general approach to the human factors (HF) analysis of new or existing projects at NASA/Goddard is delineated. Because the methodology evolved from HF evaluations of the Mission Planning Terminal (MPT) and the Earth Radiation Budget Satellite Mission Operations Room (ERBS MOR), it is directed specifically to the HF analysis of real-time support applications. Major topics included for discussion are the process of establishing a working relationship between the Human Factors Group (HFG) and the project, orientation of HF analysts to the project, human factors analysis and review, and coordination with major cycles of system development. Sub-topics include specific areas for analysis and appropriate HF tools. Management support functions are outlined. References provide a guide to sources of further information.

Coherent light depolarization by multiple scattering media and tissues: some fundamentals and applications

NASA Astrophysics Data System (ADS)

Zimnyakov, Dmitry A.; Tuchin, Valery V.; Yodh, Arjun G.; Mishin, Alexey A.; Peretochkin, Igor S.

1998-04-01

Relationships between decorrelation and depolarization of coherent light scattered by disordered media are examined by using the conception of the photon paths distribution functions. Analysis of behavior of the autocorrelation functions of the scattered field fluctuations and their polarization properties allows us to introduce generalized parameter of scattering media such as specific correlation time. Determination of specific correlation time has been carried out for phantom scattering media (water suspensions of polystyrene spheres). Results of statistical, correlation and polarization analysis of static and dynamic speckle patterns carried out in the experiments with human sclera with artificially controlled optical transmittance are presented. Some possibilities of applications of such polarization- correlation technique for monitoring and visualization of non- single scattering tissue structures are discussed.

The Open System Interconnection as a building block in a health sciences information network.

PubMed Central

Boss, R W

1985-01-01

The interconnection of integrated health sciences library systems with other health sciences computer systems to achieve information networks will require either custom linkages among specific devices or the adoption of standards that all systems support. The most appropriate standards appear to be those being developed under the Open System Interconnection (OSI) reference model, which specifies a set of rules and functions that computers must follow to exchange information. The protocols have been modularized into seven different layers. The lowest three layers are generally available as off-the-shelf interfacing products. The higher layers require special development for particular applications. This paper describes the OSI, its application in health sciences networks, and specific tasks that remain to be undertaken. PMID:4052672

Heat-pump-centered integrated community energy systems: Systems development, Consolidated Natural Gas Service Company

NASA Astrophysics Data System (ADS)

Baker, N. R.; Donakowski, T. D.; Foster, R. B.; Sala, D. L.; Tison, R. R.; Whaley, T. P.; Yudow, B. D.; Swenson, P. F.

1980-01-01

The heat actuated heat pump centered integrated community energy system (HAHP-ICES) is described. The system utilizes a gas fired, engine-driven, heat pump and commercial buildings, and offers several advantages over the more conventional equipment it is intended to supplant. The general nonsite specific application assumes a hypothetical community of one 59,000 cu ft office building and five 24 unit, low rise apartment buildings located in a region with a climate similar to Chicago. Various sensitivity analyses are performed and through which the performance characteristics of the HAHP are explored. The results provided the selection criteria for the site specific application of the HAHP-ICES concept to a real world community. The site-specific community consists of: 42 town houses; five 120 unit, low rise apartment buildings; five 104 unit high rise apartment buildings; one 124,000 cu ft office building; and a single 135,000 cu ft retail building.

Printable Electrochemical Biosensors: A Focus on Screen-Printed Electrodes and Their Application

PubMed Central

Yamanaka, Keiichiro; Vestergaard, Mun’delanji C.; Tamiya, Eiichi

2016-01-01

In this review we present electrochemical biosensor developments, focusing on screen-printed electrodes (SPEs) and their applications. In particular, we discuss how SPEs enable simple integration, and the portability needed for on-field applications. First, we briefly discuss the general concept of biosensors and quickly move on to electrochemical biosensors. Drawing from research undertaken in this area, we cover the development of electrochemical DNA biosensors in great detail. Through specific examples, we describe the fabrication and surface modification of printed electrodes for sensitive and selective detection of targeted DNA sequences, as well as integration with reverse transcription-polymerase chain reaction (RT-PCR). For a more rounded approach, we also touch on electrochemical immunosensors and enzyme-based biosensors. Last, we present some electrochemical devices specifically developed for use with SPEs, including USB-powered compact mini potentiostat. The coupling demonstrates the practical use of printable electrode technologies for application at point-of-use. Although tremendous advances have indeed been made in this area, a few challenges remain. One of the main challenges is application of these technologies for on-field analysis, which involves complicated sample matrices. PMID:27775661

Multi-application controls: Robust nonlinear multivariable aerospace controls applications

NASA Technical Reports Server (NTRS)

Enns, Dale F.; Bugajski, Daniel J.; Carter, John; Antoniewicz, Bob

1994-01-01

This viewgraph presentation describes the general methodology used to apply Honywell's Multi-Application Control (MACH) and the specific application to the F-18 High Angle-of-Attack Research Vehicle (HARV) including piloted simulation handling qualities evaluation. The general steps include insertion of modeling data for geometry and mass properties, aerodynamics, propulsion data and assumptions, requirements and specifications, e.g. definition of control variables, handling qualities, stability margins and statements for bandwidth, control power, priorities, position and rate limits. The specific steps include choice of independent variables for least squares fits to aerodynamic and propulsion data, modifications to the management of the controls with regard to integrator windup and actuation limiting and priorities, e.g. pitch priority over roll, and command limiting to prevent departures and/or undesirable inertial coupling or inability to recover to a stable trim condition. The HARV control problem is characterized by significant nonlinearities and multivariable interactions in the low speed, high angle-of-attack, high angular rate flight regime. Systematic approaches to the control of vehicle motions modeled with coupled nonlinear equations of motion have been developed. This paper will discuss the dynamic inversion approach which explicity accounts for nonlinearities in the control design. Multiple control effectors (including aerodynamic control surfaces and thrust vectoring control) and sensors are used to control the motions of the vehicles in several degrees-of-freedom. Several maneuvers will be used to illustrate performance of MACH in the high angle-of-attack flight regime. Analytical methods for assessing the robust performance of the multivariable control system in the presence of math modeling uncertainty, disturbances, and commands have reached a high level of maturity. The structured singular value (mu) frequency response methodology is presented as a method for analyzing robust performance and the mu-synthesis method will be presented as a method for synthesizing a robust control system. The paper concludes with the author's expectations regarding future applications of robust nonlinear multivariable controls.

Network protocols for real-time applications

NASA Technical Reports Server (NTRS)

Johnson, Marjory J.

1987-01-01

The Fiber Distributed Data Interface (FDDI) and the SAE AE-9B High Speed Ring Bus (HSRB) are emerging standards for high-performance token ring local area networks. FDDI was designed to be a general-purpose high-performance network. HSRB was designed specifically for military real-time applications. A workshop was conducted at NASA Ames Research Center in January, 1987 to compare and contrast these protocols with respect to their ability to support real-time applications. This report summarizes workshop presentations and includes an independent comparison of the two protocols. A conclusion reached at the workshop was that current protocols for the upper layers of the Open Systems Interconnection (OSI) network model are inadequate for real-time applications.

Thin Film Li Ion Microbatteries for NASA Applications

NASA Technical Reports Server (NTRS)

West, W. C.; Ratnakumar, B. V.; Brandon, E.; Blosiu, J. O.; Surampudi, S.

1999-01-01

Rechargeable thin film microbatteries have recently become the topic of widespread research for use in low power applications such as battery-backed CMOS memory, miniaturized implantable medical devices and smart cards. In particular, the Center for Integrated Space Microsystems (CISM) at NASA's Jet Propulsion Laboratory has interest in applying this technology for secondary power systems in miniaturized satellites, microsensors, microactuators and other remote MEMS applications. The general requirements of the microbatteries for these applications are high specific energy, wide range of temperature stability. low self-discharge rate, and flexibility of cell design. The thin film Li ion materials system using LiCoO2(LiPO(x)N(1-x))SnO is expected to fulfill these requirements.

Progress in characterizing the multidimensional color quality properties of white LED light sources

NASA Astrophysics Data System (ADS)

Teunissen, Kees; Hoelen, Christoph

2016-03-01

With the introduction of solid state light sources, the variety in emission spectra is almost unlimited. However, the set of standardized parameters to characterize a white LED light source, such as correlated color temperature (CCT) and CIE general color rendering index (Ra), is known to be limited and insufficient for describing perceived differences between light sources. Several characterization methods have been proposed over the past decades, but their contribution to perceived color quality has not always been validated. To gain more insight in the relevant characteristics of the emission spectra for specific applications, we have conducted a perception experiment to rate the attractiveness of three sets of objects, including fresh food, packaging materials and skin tones. The objects were illuminated with seven different combinations of Red, Green, Blue, Amber and White LEDs, all with the same CCT and illumination level, but with differences in Ra and color saturation. The results show that, in general, object attractiveness does not correlate well with Ra, but shows a positive correlation with saturation increase for two out of three applications. There is no clear relation between saturation and skin tone attractiveness, partly due to differences in preference between males and females. A relative gamut area index (Ga) represents the average change in saturation and a complementary color vector graphic shows the direction and magnitude of chromatic differences for the eight CIE-1974 test-color samples. Together with the CIE general color rendering index (Ra) they provide useful information for designing and optimizing application specific emission spectra.

Index of cyber integrity

NASA Astrophysics Data System (ADS)

Anderson, Gustave

2014-05-01

Unfortunately, there is no metric, nor set of metrics, that are both general enough to encompass all possible types of applications yet specific enough to capture the application and attack specific details. As a result we are left with ad-hoc methods for generating evaluations of the security of our systems. Current state of the art methods for evaluating the security of systems include penetration testing and cyber evaluation tests. For these evaluations, security professionals simulate an attack from malicious outsiders and malicious insiders. These evaluations are very productive and are able to discover potential vulnerabilities resulting from improper system configuration, hardware and software flaws, or operational weaknesses. We therefore propose the index of cyber integrity (ICI), which is modeled after the index of biological integrity (IBI) to provide a holistic measure of the health of a system under test in a cyber-environment. The ICI provides a broad base measure through a collection of application and system specific metrics. In this paper, following the example of the IBI, we demonstrate how a multi-metric index may be used as a holistic measure of the health of a system under test in a cyber-environment.

Preliminary vibration, acoustic, and shock design and test criteria for components on the SRB, ET, and SSME

NASA Technical Reports Server (NTRS)

1976-01-01

Specifications for vibration, acoustic and shock design for components and subassemblies on the External Tank (ET), Solid Rocket Booster (SRB), and Space Shuttle Main Engine (SSME). Included are vibration, acoustic, shock, transportation, handling, and acceptance test requirements and procedures. The space shuttle ET, SRB, and SSME have been divided into zones and subzones. Zones are designated primarily to assist in determining the applicable specifications. A subzone (General Specification) is available for use when the location of the component is known but component design and weight are not well defined. When the location, weight, and mounting configuration of the component are known, specifications for appropriate subzone weight ranges are available. Criteria for some specific components are also presented.

Characteristics of Smartphone Applications for Nutrition Improvement in Community Settings: A Scoping Review1234

PubMed Central

Brimblecombe, Julie; Wycherley, Thomas Philip

2017-01-01

Smartphone applications are increasingly being used to support nutrition improvement in community settings. However, there is a scarcity of practical literature to support researchers and practitioners in choosing or developing health applications. This work maps the features, key content, theoretical approaches, and methods of consumer testing of applications intended for nutrition improvement in community settings. A systematic, scoping review methodology was used to map published, peer-reviewed literature reporting on applications with a specific nutrition-improvement focus intended for use in the community setting. After screening, articles were grouped into 4 categories: dietary self-monitoring trials, nutrition improvement trials, application description articles, and qualitative application development studies. For mapping, studies were also grouped into categories based on the target population and aim of the application or program. Of the 4818 titles identified from the database search, 64 articles were included. The broad categories of features found to be included in applications generally corresponded to different behavior change support strategies common to many classic behavioral change models. Key content of applications generally focused on food composition, with tailored feedback most commonly used to deliver educational content. Consumer testing before application deployment was reported in just over half of the studies. Collaboration between practitioners and application developers promotes an appropriate balance of evidence-based content and functionality. This work provides a unique resource for program development teams and practitioners seeking to use an application for nutrition improvement in community settings. PMID:28298274

Characteristics of Smartphone Applications for Nutrition Improvement in Community Settings: A Scoping Review.

PubMed

Tonkin, Emma; Brimblecombe, Julie; Wycherley, Thomas Philip

2017-03-01

Smartphone applications are increasingly being used to support nutrition improvement in community settings. However, there is a scarcity of practical literature to support researchers and practitioners in choosing or developing health applications. This work maps the features, key content, theoretical approaches, and methods of consumer testing of applications intended for nutrition improvement in community settings. A systematic, scoping review methodology was used to map published, peer-reviewed literature reporting on applications with a specific nutrition-improvement focus intended for use in the community setting. After screening, articles were grouped into 4 categories: dietary self-monitoring trials, nutrition improvement trials, application description articles, and qualitative application development studies. For mapping, studies were also grouped into categories based on the target population and aim of the application or program. Of the 4818 titles identified from the database search, 64 articles were included. The broad categories of features found to be included in applications generally corresponded to different behavior change support strategies common to many classic behavioral change models. Key content of applications generally focused on food composition, with tailored feedback most commonly used to deliver educational content. Consumer testing before application deployment was reported in just over half of the studies. Collaboration between practitioners and application developers promotes an appropriate balance of evidence-based content and functionality. This work provides a unique resource for program development teams and practitioners seeking to use an application for nutrition improvement in community settings. © 2017 American Society for Nutrition.

Investigation of practical applications of H infinity control theory to the design of control systems for large space structures

NASA Technical Reports Server (NTRS)

Irwin, R. Dennis

1988-01-01

The applicability of H infinity control theory to the problems of large space structures (LSS) control was investigated. A complete evaluation to any technique as a candidate for large space structure control involves analytical evaluation, algorithmic evaluation, evaluation via simulation studies, and experimental evaluation. The results of analytical and algorithmic evaluations are documented. The analytical evaluation involves the determination of the appropriateness of the underlying assumptions inherent in the H infinity theory, the determination of the capability of the H infinity theory to achieve the design goals likely to be imposed on an LSS control design, and the identification of any LSS specific simplifications or complications of the theory. The resuls of the analytical evaluation are presented in the form of a tutorial on the subject of H infinity control theory with the LSS control designer in mind. The algorthmic evaluation of H infinity for LSS control pertains to the identification of general, high level algorithms for effecting the application of H infinity to LSS control problems, the identification of specific, numerically reliable algorithms necessary for a computer implementation of the general algorithms, the recommendation of a flexible software system for implementing the H infinity design steps, and ultimately the actual development of the necessary computer codes. Finally, the state of the art in H infinity applications is summarized with a brief outline of the most promising areas of current research.

Immunity to tumour antigens.

PubMed

Li, Geng; Ali, Selman A; McArdle, Stephanie E B; Mian, Shahid; Ahmad, Murrium; Miles, Amanda; Rees, Robert C

2005-01-01

During the last decade, a large number of human tumour antigens have been identified. These antigens are classified as tumour-specific shared antigens, tissue-specific differentiation antigens, overexpressed antigens, tumour antigens resulting from mutations, viral antigens and fusion proteins. Antigens recognised by effectors of immune system are potential targets for antigen-specific cancer immunotherapy. However, most tumour antigens are self-proteins and are generally of low immunogenicity and the immune response elicited towards these tumour antigens is not always effective. Strategies to induce and enhance the tumour antigen-specific response are needed. This review will summarise the approaches to discovery of tumour antigens, the current status of tumour antigens, and their potential application to cancer treatment.

Microengineering in cardiovascular research: new developments and translational applications.

PubMed

Chan, Juliana M; Wong, Keith H K; Richards, Arthur Mark; Drum, Chester L

2015-04-01

Microfluidic, cellular co-cultures that approximate macro-scale biology are important tools for refining the in vitro study of organ-level function and disease. In recent years, advances in technical fabrication and biological integration have provided new insights into biological phenomena, improved diagnostic measurements, and made major steps towards de novo tissue creation. Here we review applications of these technologies specific to the cardiovascular field, emphasizing three general categories of use: reductionist vascular models, tissue-engineered vascular models, and point-of-care diagnostics. With continued progress in the ability to purposefully control microscale environments, the detailed study of both primary and cultured cells may find new relevance in the general cardiovascular research community. © The Author 2015. Published by Oxford University Press on behalf of the European Society of Cardiology.

Statistical detection of patterns in unidimensional distributions by continuous wavelet transforms

NASA Astrophysics Data System (ADS)

Baluev, R. V.

2018-04-01

Objective detection of specific patterns in statistical distributions, like groupings or gaps or abrupt transitions between different subsets, is a task with a rich range of applications in astronomy: Milky Way stellar population analysis, investigations of the exoplanets diversity, Solar System minor bodies statistics, extragalactic studies, etc. We adapt the powerful technique of the wavelet transforms to this generalized task, making a strong emphasis on the assessment of the patterns detection significance. Among other things, our method also involves optimal minimum-noise wavelets and minimum-noise reconstruction of the distribution density function. Based on this development, we construct a self-closed algorithmic pipeline aimed to process statistical samples. It is currently applicable to single-dimensional distributions only, but it is flexible enough to undergo further generalizations and development.

Controllers, observers, and applications thereof

NASA Technical Reports Server (NTRS)

Gao, Zhiqiang (Inventor); Zhou, Wankun (Inventor); Miklosovic, Robert (Inventor); Radke, Aaron (Inventor); Zheng, Qing (Inventor)

2011-01-01

Controller scaling and parameterization are described. Techniques that can be improved by employing the scaling and parameterization include, but are not limited to, controller design, tuning and optimization. The scaling and parameterization methods described here apply to transfer function based controllers, including PID controllers. The parameterization methods also apply to state feedback and state observer based controllers, as well as linear active disturbance rejection (ADRC) controllers. Parameterization simplifies the use of ADRC. A discrete extended state observer (DESO) and a generalized extended state observer (GESO) are described. They improve the performance of the ESO and therefore ADRC. A tracking control algorithm is also described that improves the performance of the ADRC controller. A general algorithm is described for applying ADRC to multi-input multi-output systems. Several specific applications of the control systems and processes are disclosed.

Biological effects of wood ash application to forest and aquatic ecosystems.

PubMed

Aronsson, K Andreas; Ekelund, Nils G A

2004-01-01

The present review aims to summarize current knowledge in the topic of wood ash application to boreal forest and aquatic ecosystems, and the different effects derived from these actions. Much research has been conducted regarding the effects of wood ash application on forest growth. Present studies show that, generally speaking, forest growth can be increased on wood ash-ameliorated peatland rich in nitrogen. On mineral soils, however, no change or even decreased growth have been reported. The effects on ground vegetation are not very clear, as well as the effects on fungi, soil microbes, and soil-decomposing animals. The discrepancies between different studies are for the most part explained by abiotic factors such as variation in fertility among sites, different degrees of stabilization, and wood ash dosage used, and different time scales among different studies. The lack of knowledge in the field of aquatic ecosystems and their response to ash application is an important issue for future research. The few studies conducted have mainly considered changes in water chemistry. The biotoxic effects of ash application can roughly be divided into two categories: primary and secondary. Among the primary effects is toxicity deriving from compounds in the wood ash and cadmium is probably the worst among these. The secondary effects of wood ash are generally due to its alkaline capacity and a release of ions into the soil and soil water, and finally, watercourses and lakes. Given current knowledge, we would recommend site- and wood ash-specific application practices, rather than broad and general guidelines for wood ash application to forests.

Toward General Software Level Silent Data Corruption Detection for Parallel Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berrocal, Eduardo; Bautista-Gomez, Leonardo; Di, Sheng

Silent data corruption (SDC) poses a great challenge for high-performance computing (HPC) applications as we move to extreme-scale systems. Mechanisms have been proposed that are able to detect SDC in HPC applications by using the peculiarities of the data (more specifically, its “smoothness” in time and space) to make predictions. However, these data-analytic solutions are still far from fully protecting applications to a level comparable with more expensive solutions such as full replication. In this work, we propose partial replication to overcome this limitation. More specifically, we have observed that not all processes of an MPI application experience the samemore » level of data variability at exactly the same time. Thus, we can smartly choose and replicate only those processes for which the lightweight data-analytic detectors would perform poorly. In addition, we propose a new evaluation method based on the probability that a corruption will pass unnoticed by a particular detector (instead of just reporting overall single-bit precision and recall). In our experiments, we use four applications dealing with different explosions. Our results indicate that our new approach can protect the MPI applications analyzed with 7–70% less overhead (depending on the application) than that of full duplication with similar detection recall.« less

Combining skin prick, immediate skin application and specific-IgE testing in the diagnosis of peanut allergy in children.

PubMed

Wainstein, Brynn Kevin; Yee, Anthony; Jelley, Donna; Ziegler, Mary; Ziegler, John B

2007-05-01

Previous studies have suggested various diagnostic cut-offs of allergy tests for the diagnosis of clinical peanut allergy in children. There are few data relating to the use of combinations of these tests in children. We aimed to determine the validity of previously reported diagnostic cut-off levels of peanut allergen skin tests and peanut specific-immunoglobulin (Ig) E, as well as the usefulness of combinations of these, for predicting clinical peanut allergy in our Allergy Clinic. Children attending the Allergy Clinic with a positive peanut skin prick test (SPT; n = 84) were included in the study. Immediate skin application food tests (I-SAFT) using 1 g of peanut butter (positive if any wheals were detected at 15 min), peanut specific-IgE levels and open-label peanut food challenges were performed. Fifty-two of 85 peanut challenges were positive. Skin prick test specificity was 67% at >or=8 mm and 100% at >or=15 mm. The I-SAFT was 82% specific. A peanut specific-IgE level of 0.37 kU/l was 98% sensitive but 33% specific. A level of 10 kU/l was 100% specific. Combinations of a SPT of >or=8 mm with a positive I-SAFT and a peanut specific-IgE >or=0.37 kU/l were 88% specific with a sensitivity of 38%. Using challenge outcomes as the standard, available in vitro and in vivo diagnostic tests for peanut allergy have poor sensitivity and specificity and combining them does not significantly improve their clinical usefulness. Previously described diagnostic cut-off levels do not have general applicability. Allergy practitioners may need to interpret results of allergy tests in the context of their own practices.

Functional specifications for AI software tools for electric power applications. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faught, W.S.

1985-08-01

The principle barrier to the introduction of artificial intelligence (AI) technology to the electric power industry has not been a lack of interest or appropriate problems, for the industry abounds in both. Like most others, however, the electric power industry lacks the personnel - knowledge engineers - with the special combination of training and skills AI programming demands. Conversely, very few AI specialists are conversant with electric power industry problems and applications. The recent availability of sophisticated AI programming environments is doing much to alleviate this shortage. These products provide a set of powerful and usable software tools that enablemore » even non-AI scientists to rapidly develop AI applications. The purpose of this project was to develop functional specifications for programming tools that, when integrated with existing general-purpose knowledge engineering tools, would expedite the production of AI applications for the electric power industry. Twelve potential applications, representative of major problem domains within the nuclear power industry, were analyzed in order to identify those tools that would be of greatest value in application development. Eight tools were specified, including facilities for power plant modeling, data base inquiry, simulation and machine-machine interface.« less

Specific detection of biomolecules in physiological solutions using graphene transistor biosensors

PubMed Central

Gao, Ning; Gao, Teng; Yang, Xiao; Dai, Xiaochuan; Zhou, Wei; Zhang, Anqi; Lieber, Charles M.

2016-01-01

Nanomaterial-based field-effect transistor (FET) sensors are capable of label-free real-time chemical and biological detection with high sensitivity and spatial resolution, although direct measurements in high–ionic-strength physiological solutions remain challenging due to the Debye screening effect. Recently, we demonstrated a general strategy to overcome this challenge by incorporating a biomolecule-permeable polymer layer on the surface of silicon nanowire FET sensors. The permeable polymer layer can increase the effective screening length immediately adjacent to the device surface and thereby enable real-time detection of biomolecules in high–ionic-strength solutions. Here, we describe studies demonstrating both the generality of this concept and application to specific protein detection using graphene FET sensors. Concentration-dependent measurements made with polyethylene glycol (PEG)-modified graphene devices exhibited real-time reversible detection of prostate specific antigen (PSA) from 1 to 1,000 nM in 100 mM phosphate buffer. In addition, comodification of graphene devices with PEG and DNA aptamers yielded specific irreversible binding and detection of PSA in pH 7.4 1x PBS solutions, whereas control experiments with proteins that do not bind to the aptamer showed smaller reversible signals. In addition, the active aptamer receptor of the modified graphene devices could be regenerated to yield multiuse selective PSA sensing under physiological conditions. The current work presents an important concept toward the application of nanomaterial-based FET sensors for biochemical sensing in physiological environments and thus could lead to powerful tools for basic research and healthcare. PMID:27930344

Specific detection of biomolecules in physiological solutions using graphene transistor biosensors.

PubMed

Gao, Ning; Gao, Teng; Yang, Xiao; Dai, Xiaochuan; Zhou, Wei; Zhang, Anqi; Lieber, Charles M

2016-12-20

Nanomaterial-based field-effect transistor (FET) sensors are capable of label-free real-time chemical and biological detection with high sensitivity and spatial resolution, although direct measurements in high-ionic-strength physiological solutions remain challenging due to the Debye screening effect. Recently, we demonstrated a general strategy to overcome this challenge by incorporating a biomolecule-permeable polymer layer on the surface of silicon nanowire FET sensors. The permeable polymer layer can increase the effective screening length immediately adjacent to the device surface and thereby enable real-time detection of biomolecules in high-ionic-strength solutions. Here, we describe studies demonstrating both the generality of this concept and application to specific protein detection using graphene FET sensors. Concentration-dependent measurements made with polyethylene glycol (PEG)-modified graphene devices exhibited real-time reversible detection of prostate specific antigen (PSA) from 1 to 1,000 nM in 100 mM phosphate buffer. In addition, comodification of graphene devices with PEG and DNA aptamers yielded specific irreversible binding and detection of PSA in pH 7.4 1x PBS solutions, whereas control experiments with proteins that do not bind to the aptamer showed smaller reversible signals. In addition, the active aptamer receptor of the modified graphene devices could be regenerated to yield multiuse selective PSA sensing under physiological conditions. The current work presents an important concept toward the application of nanomaterial-based FET sensors for biochemical sensing in physiological environments and thus could lead to powerful tools for basic research and healthcare.

Women’s Sexuality: Behaviors, Responses, and Individual Differences

PubMed Central

Andersen, Barbara L.; Cyranowski, Jill M.

2009-01-01

Classic and contemporary approaches to the assessment of female sexuality are discussed. General approaches, assessment strategies, and models of female sexuality are organized within the conceptual domains of sexual behaviors, sexual responses (desire, excitement, orgasm, and resolution), and individual differences, including general and sex-specific personality models. Where applicable, important trends and relationships are highlighted in the literature with both existing reports and previously unpublished data. The present conceptual overview highlights areas in sexual assessment and model building that are in need of further research and theoretical clarification. PMID:8543712

An improved design method for EPC middleware

NASA Astrophysics Data System (ADS)

Lou, Guohuan; Xu, Ran; Yang, Chunming

2014-04-01

For currently existed problems and difficulties during the small and medium enterprises use EPC (Electronic Product Code) ALE (Application Level Events) specification to achieved middleware, based on the analysis of principle of EPC Middleware, an improved design method for EPC middleware is presented. This method combines the powerful function of MySQL database, uses database to connect reader-writer with upper application system, instead of development of ALE application program interface to achieve a middleware with general function. This structure is simple and easy to implement and maintain. Under this structure, different types of reader-writers added can be configured conveniently and the expandability of the system is improved.

Epistemology and the Curriculum: The Bio-Ecocultural Cognitive Spiral as Model.

ERIC Educational Resources Information Center

Gagne, Raymond C.

Described is a curriculum theory and construction within an epistemological model whose specific purpose is to serve as a general guide to the Amerindian peoples (Indians and Inuit) in their search for solutions to the problem of cultural survival. The model is also meant to have universal application, especially where there are cultures in…

10 CFR 40.32 - General requirements for issuance of specific licenses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... requested in such manner as to protect health and minimize danger to life or property; and (c) The applicant... to life or property; and (d) The issuance of the license will not be inimical to the common defense... which the NRC determines will significantly affect the quality of the environment, the Director, Office...

Atmospheric, Magnetospheric and Plasmas in Space (AMPS) spacelab payload definition study. Volume 3: Interface control documents. Part 3: AMPS payload to instruments ICD

NASA Technical Reports Server (NTRS)

1976-01-01

General physical, functional, and operational interface control requirements for instruments on the first AMPS payload are presented. Interface specifications are included to satisfy ground handling, prelaunch, launch, stowage, operation, and landing activities. Applicable supporting documentation to implement the information is also given.

Integration and Implementation of Web Simulators in Experimental e-Learning: An Application for Capacity Auctions

ERIC Educational Resources Information Center

Otamendi, Francisco Javier; Doncel, Luis Miguel

2013-01-01

Experimental teaching in general, and simulation in particular, have primarily been used in lecture rooms but in the future must also be adapted to e-learning. The integration of web simulators into virtual learning environments, coupled with specific supporting video documentation and the use of videoconference tools, results in robust…

A Classroom Note on the Binomial and Poisson Distributions: Biomedical Examples for Use in Teaching Introductory Statistics

ERIC Educational Resources Information Center

Holland, Bart K.

2006-01-01

A generally-educated individual should have some insight into how decisions are made in the very wide range of fields that employ statistical and probabilistic reasoning. Also, students of introductory probability and statistics are often best motivated by specific applications rather than by theory and mathematical development, because most…

40 CFR Table 1 to Subpart Lll of... - Applicability of General Provisions

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for THC CEMS Temperature and activated carbon injection monitoring data reduction requirements... specification supersedes requirements for THC CEMS. 63.8(f)(1)-(5) Alternative Monitoring Method Yes Additional... requirements for THC CEMS. 63.10(c)(2)-(4) No [Reserved] 63.10(c)(5)-(8) Additional CMS Recordkeeping Yes PS-8A...

Passenger Carrying Submersibles: System Safety Analysis

DTIC Science & Technology

1989-08-01

General Provisions Subpart B Commercial Diving Operations 33 CFR NAVIGATION (As Applicable) Subchapter 0 - Pollution Part 155 Oil Pollution...and Materials: Specifications and Approvals; Subchapter S, Subdivision and Stability; and finally, 33 CFR Subchapter 0, Part 155 Oil Pollution...contamination. Air contamination could also result from inadequate air circulation, loss of temperature/humidity control, or refrigerant or oil leakage

26 CFR 1.148-8 - Small issuer exception to rebate requirement.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Tax Exemption Requirements for State and Local Bonds § 1... taxing powers if it has the power to impose taxes (or to cause another entity to impose taxes) of general... limited to a specific type of tax, provided that the applicability of the tax is not limited to a small...

The Study of Motivation in Library and Information Management Education: Qualitative and Quantitative Research

ERIC Educational Resources Information Center

Perez-Sabater, Carmen; Montero-Fleta, Begona

2012-01-01

The application of new technologies and media has changed the concept of teaching and learning, offering effective and attractive possibilities to the educational system, particularly to the learning of languages in specific contexts. Educators in general will agree on the importance of motivation as a key to success in language acquisition as it…

Selected Ika Proverbs: Their Aesthetics and Contexts of Usage

ERIC Educational Resources Information Center

Egede, Canon Benji

2007-01-01

The thrust of the paper is the contention that, in their general application, proverbs are to be understood as a communal property. In specific terms, however, and as Isidore Okpewho, in African Oral Literature... (1992) affirms, "every proverb must have started its life as the product of the genius of an individual oral artist. But it…

The Psychotherapy of Parenthood: Towards a Formulation and Valuation of Concurrent Work with Parents

ERIC Educational Resources Information Center

Sutton, Adrian; Hughes, Lynette

2005-01-01

This paper explores the process and value of concurrent work with parents when their child is being treated in individual psychotherapy. The position taken is that psychoanalytic understanding generally and the specific formulations presented in this paper have a broader applicability in other aspects and approaches in child and adolescent mental…

The Application of Cognitive Diagnostic Approaches via Neural Network Analysis of Serious Educational Games

ERIC Educational Resources Information Center

Lamb, Richard L.

2013-01-01

Serious Educational Games (SEGs) have been a topic of increased popularity within the educational realm since the early millennia. SEGs are generalized form of Serious Games to mean games for purposes other than entertainment but, that also specifically include training, educational purpose and pedagogy within their design. This rise in popularity…

Investigation of traveler acceptance factors in short haul air carrier operations

NASA Technical Reports Server (NTRS)

Kuhlthau, A. R.; Jacobson, I. D.

1972-01-01

The development of a mathematical model for human reaction to variables involved in transportation systems is discussed. The techniques, activities, and results related to defining certain specific inputs to the model are presented. A general schematic diagram of the problem solution is developed. The application of the model to short haul air carrier operations is examined.

Biomimetics and astronomical X-ray optics

NASA Astrophysics Data System (ADS)

Hudec, R.; Remisova, K.

2017-07-01

Some sea and water animals have strange mirror eyes which have (or might have) potential application in science and technology in general and in X—ray astrophysics in particular. While the principles of mirror eyes of decapods (lobsters, crayfishes) are already applied in space and ground—based imaging experiments, the mirror eyes of specific fishes are still very little investigated.

Molecularly Imprinted Polymers: Present and Future Prospective

PubMed Central

Vasapollo, Giuseppe; Sole, Roberta Del; Mergola, Lucia; Lazzoi, Maria Rosaria; Scardino, Anna; Scorrano, Sonia; Mele, Giuseppe

2011-01-01

Molecular Imprinting Technology (MIT) is a technique to design artificial receptors with a predetermined selectivity and specificity for a given analyte, which can be used as ideal materials in various application fields. Molecularly Imprinted Polymers (MIPs), the polymeric matrices obtained using the imprinting technology, are robust molecular recognition elements able to mimic natural recognition entities, such as antibodies and biological receptors, useful to separate and analyze complicated samples such as biological fluids and environmental samples. The scope of this review is to provide a general overview on MIPs field discussing first general aspects in MIP preparation and then dealing with various application aspects. This review aims to outline the molecularly imprinted process and present a summary of principal application fields of molecularly imprinted polymers, focusing on chemical sensing, separation science, drug delivery and catalysis. Some significant aspects about preparation and application of the molecular imprinting polymers with examples taken from the recent literature will be discussed. Theoretical and experimental parameters for MIPs design in terms of the interaction between template and polymer functionalities will be considered and synthesis methods for the improvement of MIP recognition properties will also be presented. PMID:22016636

Robust integration schemes for generalized viscoplasticity with internal-state variables. Part 1: Theoretical developments and applications

NASA Technical Reports Server (NTRS)

Saleeb, Atef F.; Li, Wei

1995-01-01

This two-part report is concerned with the development of a general framework for the implicit time-stepping integrators for the flow and evolution equations in generalized viscoplastic models. The primary goal is to present a complete theoretical formulation, and to address in detail the algorithmic and numerical analysis aspects involved in its finite element implementation, as well as to critically assess the numerical performance of the developed schemes in a comprehensive set of test cases. On the theoretical side, the general framework is developed on the basis of the unconditionally-stable, backward-Euler difference scheme as a starting point. Its mathematical structure is of sufficient generality to allow a unified treatment of different classes of viscoplastic models with internal variables. In particular, two specific models of this type, which are representative of the present start-of-art in metal viscoplasticity, are considered in applications reported here; i.e., fully associative (GVIPS) and non-associative (NAV) models. The matrix forms developed for both these models are directly applicable for both initially isotropic and anisotropic materials, in general (three-dimensional) situations as well as subspace applications (i.e., plane stress/strain, axisymmetric, generalized plane stress in shells). On the computational side, issues related to efficiency and robustness are emphasized in developing the (local) interative algorithm. In particular, closed-form expressions for residual vectors and (consistent) material tangent stiffness arrays are given explicitly for both GVIPS and NAV models, with their maximum sizes 'optimized' to depend only on the number of independent stress components (but independent of the number of viscoplastic internal state parameters). Significant robustness of the local iterative solution is provided by complementing the basic Newton-Raphson scheme with a line-search strategy for convergence. In the present first part of the report, we focus on the theoretical developments, and discussions of the results of numerical-performance studies using the integration schemes for GVIPS and NAV models.

Investigations into Generalization of Constraint-Based Scheduling Theories with Applications to Space Telescope Observation Scheduling

NASA Technical Reports Server (NTRS)

Muscettola, Nicola; Smith, Steven S.

1996-01-01

This final report summarizes research performed under NASA contract NCC 2-531 toward generalization of constraint-based scheduling theories and techniques for application to space telescope observation scheduling problems. Our work into theories and techniques for solution of this class of problems has led to the development of the Heuristic Scheduling Testbed System (HSTS), a software system for integrated planning and scheduling. Within HSTS, planning and scheduling are treated as two complementary aspects of the more general process of constructing a feasible set of behaviors of a target system. We have validated the HSTS approach by applying it to the generation of observation schedules for the Hubble Space Telescope. This report summarizes the HSTS framework and its application to the Hubble Space Telescope domain. First, the HSTS software architecture is described, indicating (1) how the structure and dynamics of a system is modeled in HSTS, (2) how schedules are represented at multiple levels of abstraction, and (3) the problem solving machinery that is provided. Next, the specific scheduler developed within this software architecture for detailed management of Hubble Space Telescope operations is presented. Finally, experimental performance results are given that confirm the utility and practicality of the approach.

Digital pathology: A systematic evaluation of the patent landscape.

PubMed

Cucoranu, Ioan C; Parwani, Anil V; Vepa, Suryanarayana; Weinstein, Ronald S; Pantanowitz, Liron

2014-01-01

Digital pathology is a relatively new field. Inventors of technology in this field typically file for patents to protect their intellectual property. An understanding of the patent landscape is crucial for companies wishing to secure patent protection and market dominance for their products. To our knowledge, there has been no prior systematic review of patents related to digital pathology. Therefore, the aim of this study was to systematically identify and evaluate United States patents and patent applications related to digital pathology. Issued patents and patent applications related to digital pathology published in the United States Patent and Trademark Office (USPTO) database (www.uspto.gov) (through January 2014) were searched using the Google Patents search engine (Google Inc., Mountain View, California, USA). Keywords and phrases related to digital pathology, whole-slide imaging (WSI), image analysis, and telepathology were used to query the USPTO database. Data were downloaded and analyzed using the Papers application (Mekentosj BV, Aalsmeer, Netherlands). A total of 588 United States patents that pertain to digital pathology were identified. In addition, 228 patent applications were identified, including 155 that were pending, 65 abandoned, and eight rejected. Of the 588 patents granted, 348 (59.18%) were specific to pathology, while 240 (40.82%) included more general patents also usable outside of pathology. There were 70 (21.12%) patents specific to pathology and 57 (23.75%) more general patents that had expired. Over 120 unique entities (individual inventors, academic institutions, and private companies) applied for pathology specific patents. Patents dealt largely with telepathology and image analysis. WSI related patents addressed image acquisition (scanning and focus), quality (z-stacks), management (storage, retrieval, and transmission of WSI files), and viewing (graphical user interface (GUI), workflow, slide navigation and remote control). An increasing number of recent patents focused on computer-aided diagnosis (CAD) and digital consultation networks. In the last 2 decades, there have been an increasing number of patents granted and patent applications filed related to digital pathology. The number of these patents quadrupled during the last decade, and this trend is predicted to intensify based on the number of patent applications already published by the USPTO.

Digital pathology: A systematic evaluation of the patent landscape

PubMed Central

Cucoranu, Ioan C.; Parwani, Anil V.; Vepa, Suryanarayana; Weinstein, Ronald S.; Pantanowitz, Liron

2014-01-01

Introduction: Digital pathology is a relatively new field. Inventors of technology in this field typically file for patents to protect their intellectual property. An understanding of the patent landscape is crucial for companies wishing to secure patent protection and market dominance for their products. To our knowledge, there has been no prior systematic review of patents related to digital pathology. Therefore, the aim of this study was to systematically identify and evaluate United States patents and patent applications related to digital pathology. Materials and Methods: Issued patents and patent applications related to digital pathology published in the United States Patent and Trademark Office (USPTO) database (www.uspto.gov) (through January 2014) were searched using the Google Patents search engine (Google Inc., Mountain View, California, USA). Keywords and phrases related to digital pathology, whole-slide imaging (WSI), image analysis, and telepathology were used to query the USPTO database. Data were downloaded and analyzed using the Papers application (Mekentosj BV, Aalsmeer, Netherlands). Results: A total of 588 United States patents that pertain to digital pathology were identified. In addition, 228 patent applications were identified, including 155 that were pending, 65 abandoned, and eight rejected. Of the 588 patents granted, 348 (59.18%) were specific to pathology, while 240 (40.82%) included more general patents also usable outside of pathology. There were 70 (21.12%) patents specific to pathology and 57 (23.75%) more general patents that had expired. Over 120 unique entities (individual inventors, academic institutions, and private companies) applied for pathology specific patents. Patents dealt largely with telepathology and image analysis. WSI related patents addressed image acquisition (scanning and focus), quality (z-stacks), management (storage, retrieval, and transmission of WSI files), and viewing (graphical user interface (GUI), workflow, slide navigation and remote control). An increasing number of recent patents focused on computer-aided diagnosis (CAD) and digital consultation networks. Conclusion: In the last 2 decades, there have been an increasing number of patents granted and patent applications filed related to digital pathology. The number of these patents quadrupled during the last decade, and this trend is predicted to intensify based on the number of patent applications already published by the USPTO. PMID:25057430

Analysis of the site-specific carbon isotope composition of propane by gas source isotope ratio mass spectrometer

NASA Astrophysics Data System (ADS)

Piasecki, Alison; Sessions, Alex; Lawson, Michael; Ferreira, A. A.; Neto, E. V. Santos; Eiler, John M.

2016-09-01

Site-specific isotope ratio measurements potentially provide valuable information about the formation and degradation of complex molecules-information that is lost in conventional bulk isotopic measurements. Here we discuss the background and possible applications of such measurements, and present a technique for studying the site-specific carbon isotope composition of propane at natural abundance based on mass spectrometric analysis of the intact propane molecule and its fragment ions. We demonstrate the feasibility of this approach through measurements of mixtures of natural propane and propane synthesized with site-specific 13C enrichment, and we document the limits of precision of our technique. We show that mass balance calculations of the bulk δ13C of propane based on our site-specific measurements is generally consistent with independent constraints on bulk δ13C. We further demonstrate the accuracy of the technique, and illustrate one of its simpler applications by documenting the site-specific carbon isotope signature associated with gas phase diffusion of propane, confirming that our measurements conform to the predictions of the kinetic theory of gases. This method can be applied to propane samples of moderate size (tens of micromoles) isolated from natural gases. Thus, it provides a means of studying the site-specific stable isotope systematics of propane at natural isotope abundances on sample sizes that are readily recovered from many natural environments. This method may also serve as a model for future techniques that apply high-resolution mass spectrometry to study the site-specific isotopic distributions of larger organic molecules, with potential applications to biosynthesis, forensics and other geochemical subjects.

Factors that impact nurses' use of electronic mail (e-mail).

PubMed

Hughes, J A; Pakieser, R A

1999-01-01

As electronic applications are used increasingly in healthcare, nurses are being challenged to adopt them. Electronic mail (e-mail) is an electronic tool with general as well as healthcare uses. E-mail use may be an opportunity to learn a tool that requires skills similar to those used in other applications. This study aimed to identify barriers and facilitators that impact nurses' use of e-mail in the workplace. Data for this study were gathered using focus group methodology. Content analysis identified and labeled factors into seven major categories. Specific factors identified were generally consistent with those previously described in the literature as affecting use of computers in general. However, there were several additional factors identified that were not reported in other previous studies: lack of face-to-face communication, individual writing skills, recency of any educational experience, volume of mail received, password integrity, and technical support. Findings from this study provide information for any individual involved in introducing or updating an e-mail system in a healthcare environment.

Integrated Systems Health Management (ISHM) Toolkit

NASA Technical Reports Server (NTRS)

Venkatesh, Meera; Kapadia, Ravi; Walker, Mark; Wilkins, Kim

2013-01-01

A framework of software components has been implemented to facilitate the development of ISHM systems according to a methodology based on Reliability Centered Maintenance (RCM). This framework is collectively referred to as the Toolkit and was developed using General Atomics' Health MAP (TM) technology. The toolkit is intended to provide assistance to software developers of mission-critical system health monitoring applications in the specification, implementation, configuration, and deployment of such applications. In addition to software tools designed to facilitate these objectives, the toolkit also provides direction to software developers in accordance with an ISHM specification and development methodology. The development tools are based on an RCM approach for the development of ISHM systems. This approach focuses on defining, detecting, and predicting the likelihood of system functional failures and their undesirable consequences.

Applications of Formal Methods to Specification and Safety of Avionics Software

NASA Technical Reports Server (NTRS)

Hoover, D. N.; Guaspari, David; Humenn, Polar

1996-01-01

This report treats several topics in applications of formal methods to avionics software development. Most of these topics concern decision tables, an orderly, easy-to-understand format for formally specifying complex choices among alternative courses of action. The topics relating to decision tables include: generalizations fo decision tables that are more concise and support the use of decision tables in a refinement-based formal software development process; a formalism for systems of decision tables with behaviors; an exposition of Parnas tables for users of decision tables; and test coverage criteria and decision tables. We outline features of a revised version of ORA's decision table tool, Tablewise, which will support many of the new ideas described in this report. We also survey formal safety analysis of specifications and software.

Predictors of students' self-reported adoption of a smartphone application for medical education in general practice.

PubMed

Sandholzer, Maximilian; Deutsch, Tobias; Frese, Thomas; Winter, Alfred

2015-05-21

Smartphones and related applications are increasingly gaining relevance in the healthcare domain. We previously assessed the demands and preferences of medical students towards an application accompanying them during a course on general practice. The current study aims to elucidate the factors associated with adoption of such a technology. Therefore we provided students with a prototype of an application specifically related to their studies in general practice. A total estimation among students participating in a general practice examination at the Leipzig Medical School was conducted in May 2014. Students were asked to answer a structured self-designed questionnaire. Univariable comparisons were made to identify significant differences between those students who reported to have used the application frequently and those who did not. Multivariable binary logistic regression was used to reveal independent predictors of frequent application usage. The response rate was 99.3 % (n = 305/307). The majority (59 %, n = 180/305) were female students. The mean age was 24.5 years and 79.9 % (n = 243/304) owned a smartphone or tablet computer. Regarding the usage of the provided application, 2.3 % (n = 7/303) did not use the app while 68.0 % (n = 206/303) replied to have used it more than five times. Frequent users significantly differed from non-frequent users with regard to being female rather than male, higher mobile device ownership, more frequent exchange about obtaining the course certificate, higher personal interest in new technologies, larger enjoyment of the technology, lower intention to not use smartphone applications in the future, better opinion towards smartphone applications for the profession of a doctor, higher perceived importance of medical applications on the job, higher compatibility of smartphone applications with personal work style, higher perceived relevance of university support and personal benefit of use. Multivariable analysis revealed a set of four variables independently predicting frequent usage: being female, a higher perceived benefit of the supplied application, a higher personal interest in new technologies, and a higher perceived impact of previous experiences on smartphone adoption (Pseudo-R(2)(Nagelkerke) = 0.245). Understanding medical students' adoption of smartphone applications used for educational purposes may provide useful information to guide the implementation process as well as the design of respective applications.

DNA nanotechnology and fluorescence applications.

PubMed

Schlichthaerle, Thomas; Strauss, Maximilian T; Schueder, Florian; Woehrstein, Johannes B; Jungmann, Ralf

2016-06-01

Structural DNA nanotechnology allow researchers to use the unique molecular recognition properties of DNA strands to construct nanoscale objects with almost arbitrary complexity in two and three dimensions. Abstracted as molecular breadboards, DNA nanostructures enable nanometer-precise placement of guest molecules such as proteins, fluorophores, or nanoparticles. These assemblies can be used to study biological phenomena with unprecedented control over number, spacing, and molecular identity. Here, we give a general introduction to structural DNA nanotechnology and more specifically discuss applications of DNA nanostructures in the field of fluorescence and plasmonics. Copyright © 2016 Elsevier Ltd. All rights reserved.

Bayesian Inference in the Modern Design of Experiments

NASA Technical Reports Server (NTRS)

DeLoach, Richard

2008-01-01

This paper provides an elementary tutorial overview of Bayesian inference and its potential for application in aerospace experimentation in general and wind tunnel testing in particular. Bayes Theorem is reviewed and examples are provided to illustrate how it can be applied to objectively revise prior knowledge by incorporating insights subsequently obtained from additional observations, resulting in new (posterior) knowledge that combines information from both sources. A logical merger of Bayesian methods and certain aspects of Response Surface Modeling is explored. Specific applications to wind tunnel testing, computational code validation, and instrumentation calibration are discussed.

Variational transition state theory: theoretical framework and recent developments.

PubMed

Bao, Junwei Lucas; Truhlar, Donald G

2017-12-11

This article reviews the fundamentals of variational transition state theory (VTST), its recent theoretical development, and some modern applications. The theoretical methods reviewed here include multidimensional quantum mechanical tunneling, multistructural VTST (MS-VTST), multi-path VTST (MP-VTST), both reaction-path VTST (RP-VTST) and variable reaction coordinate VTST (VRC-VTST), system-specific quantum Rice-Ramsperger-Kassel theory (SS-QRRK) for predicting pressure-dependent rate constants, and VTST in the solid phase, liquid phase, and enzymes. We also provide some perspectives regarding the general applicability of VTST.

Construction of the TH-GEM detector components for metrology of low energy ionizing radiation

NASA Astrophysics Data System (ADS)

Silva, N. F.; Silva, T. F.; Castro, M. C.; Natal da Luz, H.; Caldas, L. V. E.

2018-03-01

The Gas Electron Multiplier (GEM) detector was originally proposed as a position sensitive detector to determine trajectories of particles prevenient from high-energy collisions. In order to study the potential of TH-GEM type detectors in dosimetric applications for low energy X-rays, specifically for the mammography standard qualities, it was proposed to construct a prototype with characteristics suitable for such use. In this work the general, structural and material parameters applicable to the necessary conditions were defined, establishing the process of construction of the components of a prototype.

Origin of probabilities and their application to the multiverse

NASA Astrophysics Data System (ADS)

Albrecht, Andreas; Phillips, Daniel

2014-12-01

We argue using simple models that all successful practical uses of probabilities originate in quantum fluctuations in the microscopic physical world around us, often propagated to macroscopic scales. Thus we claim there is no physically verified fully classical theory of probability. We comment on the general implications of this view, and specifically question the application of purely classical probabilities to cosmology in cases where key questions are known to have no quantum answer. We argue that the ideas developed here may offer a way out of the notorious measure problems of eternal inflation.

Functional Magnetic Resonance Imaging (fMRI) Neurofeedback: Implementations and Applications

PubMed Central

DEWIPUTRI, Wan Ilma; AUER, Tibor

2013-01-01

Neurofeedback (NFB) allows subjects to learn how to volitionally influence the neuronal activation in the brain by employing real-time neural activity as feedback. NFB has already been performed with electroencephalography (EEG) since the 1970s. Functional MRI (fMRI), offering a higher spatial resolution, has further increased the spatial specificity. In this paper, we briefly outline the general principles behind NFB, the implementation of fMRI-NFB studies, the feasibility of fMRI-NFB, and the application of NFB as a supplementary therapy tool. PMID:24643368

A survey on regenerative surgery performed by Swiss specialists in periodontology with special emphasis on the application of enamel matrix derivatives in infrabony defects.

PubMed

Schröen, Ola; Sahrmann, Philipp; Roos, Malgorzata; Attin, Thomas; Schmidlin, Patrick R

2011-01-01

This survey aimed to evaluate the common practice of regenerative periodontal surgery with special regard to the use of enamel matrix derivatives (EMD, Emdogain® ) by board-certified specialists in periodontology and non-certified, but active members of the Swiss Society of Periodontology (SSP). A cross-sectional postal survey of 533 dentists, representing all members of the SSP practising in Switzerland, was conducted. The questionnaire consisted of three sections, assessing: 1) general personal information regarding the practice setting and education, 2) general questions regarding periodontal surgery practices and 3) specific questions regarding the use of EMD. The information obtained was compared and differences between specialists and non-specialists were calculated. P-values smaller than 5% were considered significant. Sixty-nine percent of the specialists answered the questionnaire, compared to only 37.4% of the non-specialists (overall: 42.4%). In general, specialists performed surgeries more frequently, and presented a significantly higher percentage of EMD users than the non-specialists. The application guidelines were followed in general. Some differences were observed in application and selection criteria. The subjective perception of clinical success varied greatly among clinicians. Residual pockets were reported to be present in approximately one third of the defects after therapy. In conclusion, this survey revealed that EMD was used on a regular basis by dentists performing periodontal therapy. In addition, the answers by both groups generally corresponded well with the current available literature.

An Informative Interpretation of Decision Theory: The Information Theoretic Basis for Signal-to-Noise Ratio and Log Likelihood Ratio

DOE PAGES

Polcari, J.

2013-08-16

The signal processing concept of signal-to-noise ratio (SNR), in its role as a performance measure, is recast within the more general context of information theory, leading to a series of useful insights. Establishing generalized SNR (GSNR) as a rigorous information theoretic measure inherent in any set of observations significantly strengthens its quantitative performance pedigree while simultaneously providing a specific definition under general conditions. This directly leads to consideration of the log likelihood ratio (LLR): first, as the simplest possible information-preserving transformation (i.e., signal processing algorithm) and subsequently, as an absolute, comparable measure of information for any specific observation exemplar. Furthermore,more » the information accounting methodology that results permits practical use of both GSNR and LLR as diagnostic scalar performance measurements, directly comparable across alternative system/algorithm designs, applicable at any tap point within any processing string, in a form that is also comparable with the inherent performance bounds due to information conservation.« less

How does the size and shape of local populations in China compare to general anthropometric surveys currently used for product design?

PubMed

Daniell, Nathan; Fraysse, François; Paul, Gunther

2012-01-01

Anthropometry has long been used for a range of ergonomic applications & product design. Although products are often designed for specific cohorts, anthropometric data are typically sourced from large scale surveys representative of the general population. Additionally, few data are available for emerging markets like China and India. This study measured 80 Chinese males that were representative of a specific cohort targeted for the design of a new product. Thirteen anthropometric measurements were recorded and compared to two large databases that represented a general population, a Chinese database and a Western database. Substantial differences were identified between the Chinese males measured in this study and both databases. The subjects were substantially taller, heavier and broader than subjects in the older Chinese database. However, they were still substantially smaller, lighter and thinner than Western males. Data from current Western anthropometric surveys are unlikely to accurately represent the target population for product designers and manufacturers in emerging markets like China.

A transient laboratory method for determining the hydraulic properties of 'tight' rocks-II. Application

USGS Publications Warehouse

Neuzil, C.E.; Cooley, C.; Silliman, Stephen E.; Bredehoeft, J.D.; Hsieh, P.A.

1981-01-01

In Part I a general analytical solution for the transient pulse test was presented. Part II presents a graphical method for analyzing data from a test to obtain the hydraulic properties of the sample. The general solution depends on both hydraulic conductivity and specific storage and, in theory, analysis of the data can provide values for both of these hydraulic properties. However, in practice, one of two limiting cases may apply in which case it is possible to calculate only hydraulic conductivity or the product of hydraulic conductivity times specific storage. In this paper we examine the conditions when both hydraulic parameters can be calculated. The analyses of data from two tests are presented. In Appendix I the general solution presented in Part I is compared with an earlier analysis, in which compressive storage in the sample is assumed negligible, and the error in calculated hydraulic conductivity due to this simplifying assumption is examined. ?? 1981.

General surgery training in Spain: core curriculum and specific areas of training.

PubMed

Miguelena Bobadilla, José Ma; Morales-García, Dieter; Iturburu Belmonte, Ignacio; Alcázar Montero, José Antonio; Serra Aracil, Xabier; Docobo Durantez, Fernando; López de Cenarruzabeitia, Ignacio; Sanz Sánchez, Mercedes; Hernández Hernández, Juan Ramón

2015-03-01

The royal decree RD 639/2014 has been published, regulating among others, the core curriculum, and specific areas of training (SAT). It is of great interest for the specialty of General and Digestive Surgery (GS and DS). The aim is to expose and clarify the main provisions and reflect on their implications for the practical application of the core curriculum and SAT in the specialty of General and Digestive Surgery, to promote initiatives and regulations. This RD will be a milestone in our specialty that will test the strength of the specialty, if it does not finally culminate in its degradation against the emergence of new surgical specialties. A new stage begins in which the Spanish Association of Surgeons should be involved to define the conceptual basis of GS and DS in the XXI century, and the creation of new SAT to continue to maintain the "essence of our specialty". Copyright © 2014 AEC. Publicado por Elsevier España, S.L.U. All rights reserved.

Reverse Aging of Composite Materials for Aeronautical Applications

NASA Astrophysics Data System (ADS)

lannone, Michele

2008-08-01

Hygro-thermal ageing of polymer matrix composite materials is a major issue for all the aeronautical structures. For carbon-epoxy composites generally used in aeronautical applications the major effect of ageing is the humidity absorption, which induces a plasticization effect, generally decreasing Tg and elastic moduli, and finally design allowables. A thermodynamical and kinetic study has been performed, aimed to establish a program of periodic heating of the composite part, able to reversing the ageing effect by inducing water desorption. The study was founded on a simple model based on Fick's law, coupled with a concept of "relative saturation coefficient" depending on the different temperature of the composite part and the environment. The behaviour of some structures exposed to humidity and "reverse aged" by heating has been virtually tested. The conclusion of the study allowed to issue a specific patent application for aeronautical structures to be designed on the basis of a "humidity free" concept which allows the use of higher design allowables; having as final results lighter composite structures with a simplified certification process.

Learning style preferences of surgical residency applicants.

PubMed

Kim, Roger H; Gilbert, Timothy

2015-09-01

The learning style preferences of general surgery residents have been previously reported; there is evidence that residents who prefer read/write learning styles perform better on the American Board of Surgery In-Training Examination (ABSITE). However, little is known regarding the learning style preferences of applicants to general surgery residency and their impact on educational outcomes. In this study, the preferred learning styles of surgical residency applicants were determined. We hypothesized that applicant rank data are associated with specific learning style preferences. The Fleming VARK learning styles inventory was offered to all general surgery residency applicants that were interviewed at a university hospital-based program. The VARK model categorizes learners as visual (V), aural (A), read/write (R), kinesthetic (K), or multimodal (MM). Responses on the inventory were scored to determine the preferred learning style for each applicant. Applicant data, including United States Medical Licensing Examination (USMLE) scores, class rank, interview score, and overall final applicant ranking, were examined for association with preferred learning styles. Sixty-seven applicants were interviewed. Five applicants were excluded due to not completing the VARK inventory or having incomplete applicant data. The remaining 62 applicants (92%) were included for analysis. Most applicants (57%) had a multimodal preference. Sixty-nine percent of all applicants had some degree of preference for kinesthetic learning. There were statistically significant differences between applicants of different learning styles in terms of USMLE step 1 scores (P = 0.001) and USMLE step 2 clinical knowledge scores (P = 0.01), but not for class ranks (P = 0.27), interview scores (P = 0.20), or final ranks (P = 0.14). Multiple comparison analysis demonstrated that applicants with aural preferences had higher USMLE 1 scores (233.2) than those with kinesthetic (211.8, P = 0.005) or multimodal (214.5, P = 0.008) preferences, whereas applicants with visual preferences had higher USMLE 1 scores (230.0) than those with kinesthetic preferences (P = 0.047). Applicants with aural preferences also had higher USMLE 2 scores (249.6) than those with kinesthetic (227.6, P = 0.006) or multimodal (230.1, P = 0.008) preferences. Most applicants to general surgery residency have a multimodal learning style preference. Learning style preferences are associated with higher USMLE step 1 and step 2 scores, in particular for applicants with aural preferences. Students who performed well in lecture-dominated medical school environments because of their aural preferences could be at a disadvantage in the more independent, reading-focused learning environments of surgical residency. Copyright © 2015 Elsevier Inc. All rights reserved.

Security Analysis of DTN Architecture and Bundle Protocol Specification for Space-Based Networks

NASA Technical Reports Server (NTRS)

Ivancic, William D.

2009-01-01

A Delay-Tolerant Network (DTN) Architecture (Request for Comment, RFC-4838) and Bundle Protocol Specification, RFC-5050, have been proposed for space and terrestrial networks. Additional security specifications have been provided via the Bundle Security Specification (currently a work in progress as an Internet Research Task Force internet-draft) and, for link-layer protocols applicable to Space networks, the Licklider Transport Protocol Security Extensions. This document provides a security analysis of the current DTN RFCs and proposed security related internet drafts with a focus on space-based communication networks, which is a rather restricted subset of DTN networks. Note, the original focus and motivation of DTN work was for the Interplanetary Internet . This document does not address general store-and-forward network overlays, just the current work being done by the Internet Research Task Force (IRTF) and the Consultative Committee for Space Data Systems (CCSDS) Space Internetworking Services Area (SIS) - DTN working group under the DTN and Bundle umbrellas. However, much of the analysis is relevant to general store-and-forward overlays.

GeoSegmenter: A statistically learned Chinese word segmenter for the geoscience domain

NASA Astrophysics Data System (ADS)

Huang, Lan; Du, Youfu; Chen, Gongyang

2015-03-01

Unlike English, the Chinese language has no space between words. Segmenting texts into words, known as the Chinese word segmentation (CWS) problem, thus becomes a fundamental issue for processing Chinese documents and the first step in many text mining applications, including information retrieval, machine translation and knowledge acquisition. However, for the geoscience subject domain, the CWS problem remains unsolved. Although a generic segmenter can be applied to process geoscience documents, they lack the domain specific knowledge and consequently their segmentation accuracy drops dramatically. This motivated us to develop a segmenter specifically for the geoscience subject domain: the GeoSegmenter. We first proposed a generic two-step framework for domain specific CWS. Following this framework, we built GeoSegmenter using conditional random fields, a principled statistical framework for sequence learning. Specifically, GeoSegmenter first identifies general terms by using a generic baseline segmenter. Then it recognises geoscience terms by learning and applying a model that can transform the initial segmentation into the goal segmentation. Empirical experimental results on geoscience documents and benchmark datasets showed that GeoSegmenter could effectively recognise both geoscience terms and general terms.

Photovoltaic tests and applications project

NASA Technical Reports Server (NTRS)

1978-01-01

The activities and accomplishments of the Photovoltaic Tests and Applications Project during the period April 1976 through June 1977 are summarized. Results of efforts to identify potential near-term photovoltaic applications and users are discussed, including the outcome of an extensive survey of Federal government agencies. The status of application experiments is presented. Various general engineering efforts are reported, including the design and construction of a photovoltaic Systems Test Facility. Efforts to develop a high efficiency 10 kVA self-commutated inverter and controller specifically designed for photovoltaic systems are also discussed. The results of a wide variety of activities in the area of photovoltaic measurements and standards are related. Documents generated by the Project during the reporting period are listed in an Appendix.

Space Transportation System Meteorological Expert

NASA Technical Reports Server (NTRS)

Beller, Arthur E.; Stafford, Sue P.

1987-01-01

The STS Meteorological Expert (STSMET) is a long-term project to acquire general Shuttle operational weather forecasting expertise specific to the launch locale, to apply it to Shuttle operational weather forecasting tasks at the Cape Canaveral Forecast Facility, and ultimately to provide an on-line real-time operational aid to the duty forecasters in performing their tasks. Particular attention is given to the development of an approach called scenario-based reasoning, with specific application to summer thunderstorms; this type of reasoning can also be applied to frontal weather phenomena, visibility including fog, and wind shear.

Evaluation of natural language processing systems: Issues and approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guida, G.; Mauri, G.

This paper encompasses two main topics: a broad and general analysis of the issue of performance evaluation of NLP systems and a report on a specific approach developed by the authors and experimented on a sample test case. More precisely, it first presents a brief survey of the major works in the area of NLP systems evaluation. Then, after introducing the notion of the life cycle of an NLP system, it focuses on the concept of performance evaluation and analyzes the scope and the major problems of the investigation. The tools generally used within computer science to assess the qualitymore » of a software system are briefly reviewed, and their applicability to the task of evaluation of NLP systems is discussed. Particular attention is devoted to the concepts of efficiency, correctness, reliability, and adequacy, and how all of them basically fail in capturing the peculiar features of performance evaluation of an NLP system is discussed. Two main approaches to performance evaluation are later introduced; namely, black-box- and model-based, and their most important characteristics are presented. Finally, a specific model for performance evaluation proposed by the authors is illustrated, and the results of an experiment with a sample application are reported. The paper concludes with a discussion on research perspective, open problems, and importance of performance evaluation to industrial applications.« less

Automatic movie skimming with general tempo analysis

NASA Astrophysics Data System (ADS)

Lee, Shih-Hung; Yeh, Chia-Hung; Kuo, C. C. J.

2003-11-01

Story units are extracted by general tempo analysis including tempos analysis including tempos of audio and visual information in this research. Although many schemes have been proposed to successfully segment video data into shots using basic low-level features, how to group shots into meaningful units called story units is still a challenging problem. By focusing on a certain type of video such as sport or news, we can explore models with the specific application domain knowledge. For movie contents, many heuristic rules based on audiovisual clues have been proposed with limited success. We propose a method to extract story units using general tempo analysis. Experimental results are given to demonstrate the feasibility and efficiency of the proposed technique.

Generalizing Backtrack-Free Search: A Framework for Search-Free Constraint Satisfaction

NASA Technical Reports Server (NTRS)

Jonsson, Ari K.; Frank, Jeremy

2000-01-01

Tractable classes of constraint satisfaction problems are of great importance in artificial intelligence. Identifying and taking advantage of such classes can significantly speed up constraint problem solving. In addition, tractable classes are utilized in applications where strict worst-case performance guarantees are required, such as constraint-based plan execution. In this work, we present a formal framework for search-free (backtrack-free) constraint satisfaction. The framework is based on general procedures, rather than specific propagation techniques, and thus generalizes existing techniques in this area. We also relate search-free problem solving to the notion of decision sets and use the result to provide a constructive criterion that is sufficient to guarantee search-free problem solving.

Qualitative and quantitative revaluation of specific learning disabilities: a multicentric study.

PubMed

Operto, Francesca F; Mazza, Roberta; Buttiglione, Maura; Craig, Francesco; Frolli, Alessandro; Pisano, Simone; Margari, Lucia; Coppola, Giangennaro

2018-04-12

Specific learning disabilities are disorders that affect the instrumental skills of academic learning, leaving intact the general intellectual functioning. It is possible to distinguish: dyslexia, dysorthography, dysgraphia, and dyscalculia. The diagnosis is made according to DSMV. The aim of this study is to evaluate the implementation of Law N° 170 following a diagnosis of specific learning disabilities in children and their evolution over time. The sample under examination consists of 75 children, 56 males and 18 females aged 7,8 to 16 years, with a diagnosis of specific learning disabilities; a revaluation was carried outthrough the use of standardized instruments according to age and school attended. A twopart questionnaire was proposed: the first part turned to the parents/carers of the child and the second part turned to the boy himself. The improvement parameter has been linked, through a statistical analysis of univarianza with intelligence quotient, age, application of the law 10 October 2010 n 170, rehabilitative paths and attending afterschool program. Most of the guys are followed at school by the application of the law 170 and, outside school, by attending speech and neuropsychological therapy and after school. Going to investigate the actual use of the measures put in place by the school, it is evident a partial and incomplete application of Law 170. The most suitable measures for these children are pedagogical measures in order to make them integrate with the group class and strengthen their capacities through specific measures provided by a specific legislative decree.

Firewall Traversal for CORBA Applications Using an Implementation of Bidirectional IIOP in MICO

NASA Technical Reports Server (NTRS)

Griffin, Robert I.; Lopez, Isaac (Technical Monitor)

2002-01-01

The Object Management Group (OMG) has added specifications to the General Inter-ORB Protocol (GIOP 1.2), specifically the Internet Inter-ORB Protocol (IIOP 1.2), that allow servers and clients on opposing sides of a firewall to reverse roles and still communicate freely. This addition to the GIOP specifications is referred to as Bidirectional GIOP. The implementation of these specifications as applied to communication over TCP/IP connections is referred to as 'Bidirectional Internet Inter-ORB Protocol' or BiDirIIOP. This paper details the implementation and testing of the BiDirIIOP Specification in an open source ORB, MICO, that did not previously support Bidirectional GIOP. It also provides simple contextual information and a description of the OMG GIOP/IIOP messaging protocols.

Recent progress of task-specific ionic liquids in chiral resolution and extraction of biological samples and metal ions.

PubMed

Wu, Datong; Cai, Pengfei; Zhao, Xiaoyong; Kong, Yong; Pan, Yuanjiang

2018-01-01

Ionic liquids have been functionalized for modern applications. The functional ionic liquids are also called task-specific ionic liquids. Various task-specific ionic liquids with certain groups have been constructed and exploited widely in the field of separation. To take advantage of their properties in separation science, task-specific ionic liquids are generally used in techniques such as liquid-liquid extraction, solid-phase extraction, gas chromatography, high-performance liquid chromatography, and capillary electrophoresis. This review mainly covers original research papers published in the last five years, and we will focus on task-specific ionic liquids as the chiral selectors in chiral resolution and as extractant or sensor for biological samples and metal ion purification. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Slicing AADL Specifications for Model Checking

NASA Technical Reports Server (NTRS)

Odenbrett, Maximilian; Nguyen, Viet Yen; Noll, Thomas

2010-01-01

To combat the state-space explosion problem in model checking larger systems, abstraction techniques can be employed. Here, methods that operate on the system specification before constructing its state space are preferable to those that try to minimize the resulting transition system as they generally reduce peak memory requirements. We sketch a slicing algorithm for system specifications written in (a variant of) the Architecture Analysis and Design Language (AADL). Given a specification and a property to be verified, it automatically removes those parts of the specification that are irrelevant for model checking the property, thus reducing the size of the corresponding transition system. The applicability and effectiveness of our approach is demonstrated by analyzing the state-space reduction for an example, employing a translator from AADL to Promela, the input language of the SPIN model checker.

A quality of service negotiation procedure for distributed multimedia presentational applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hafid, A.; Bochmann, G.V.; Kerherve, B.

Most of current approaches in designing and implementing distributed multimedia (MM) presentational applications, e.g. news-on-demand, have concentrated on the performance of the continuous media file servers in terms of seek time overhead, and real-time disk scheduling; particularly the QoS negotiation mechanisms they provide are used in a rather static manner that is, these mechanisms are restricted to the evaluation of the capacity of certain system components, e.g. file server a priori known to support a specific quality of service (QoS). In contrast to those approaches, we propose a general QoS negotiation framework that supports the dynamic choice of a configurationmore » of system components to support the QoS requirements of the user of a specific application: we consider different possible system configurations and select an optimal one to provide the appropriate QoS support. In this paper we document the design and implementation of a QoS negotiation procedure for distributed MM presentational applications, such as news-on-demand. The negotiation procedure described here is an instantiation of the general framework for QoS negotiation which was developed earlier Our proposal differs in many respect with the negotiation functions provided by existing approaches: (1) the negotiation process uses an optimization approach to find a configuration of system components which supports the user requirements, (2) the negotiation process supports the negotiation of a MM document and not only a single monomedia object, (3) the QoS negotiation takes into account the cost to the user, and (4) the negotiation process may be used to support automatic adaptation to react to QoS degradations, without intervention by the user/application.« less

On the conversion of tritium units to mass fractions for hydrologic applications

USGS Publications Warehouse

Stonestrom, David A.; Andraski, Brian J.; Cooper, Clay A.; Mayers, Charles J.; Michel, Robert L.

2013-01-01

We develop a general equation for converting laboratory-reported tritium levels, expressed either as concentrations (tritium isotope number fractions) or mass-based specific activities, to mass fractions in aqueous systems. Assuming that all tritium is in the form of monotritiated water simplifies the derivation and is shown to be reasonable for most environmental settings encountered in practice. The general equation is nonlinear. For tritium concentrations c less than 4.5×1012 tritium units (TU) - i.e. specific tritium activities11 Bq kg-1 - the mass fraction w of tritiated water is approximated to within 1 part per million by w ≈ c×2.22293×10-18, i.e. the conversion is linear for all practical purposes. Terrestrial abundances serve as a proxy for non-tritium isotopes in the absence of sample-specific data. Variation in the relative abundances of non-tritium isotopes in the terrestrial hydrosphere produces a minimum range for the mantissa of the conversion factor of [2.22287; 2.22300].

Pharmacophore Models and Pharmacophore-Based Virtual Screening: Concepts and Applications Exemplified on Hydroxysteroid Dehydrogenases.

PubMed

Kaserer, Teresa; Beck, Katharina R; Akram, Muhammad; Odermatt, Alex; Schuster, Daniela

2015-12-19

Computational methods are well-established tools in the drug discovery process and can be employed for a variety of tasks. Common applications include lead identification and scaffold hopping, as well as lead optimization by structure-activity relationship analysis and selectivity profiling. In addition, compound-target interactions associated with potentially harmful effects can be identified and investigated. This review focuses on pharmacophore-based virtual screening campaigns specifically addressing the target class of hydroxysteroid dehydrogenases. Many members of this enzyme family are associated with specific pathological conditions, and pharmacological modulation of their activity may represent promising therapeutic strategies. On the other hand, unintended interference with their biological functions, e.g., upon inhibition by xenobiotics, can disrupt steroid hormone-mediated effects, thereby contributing to the development and progression of major diseases. Besides a general introduction to pharmacophore modeling and pharmacophore-based virtual screening, exemplary case studies from the field of short-chain dehydrogenase/reductase (SDR) research are presented. These success stories highlight the suitability of pharmacophore modeling for the various application fields and suggest its application also in futures studies.

SolarSoft Web Services

NASA Astrophysics Data System (ADS)

Freeland, S.; Hurlburt, N.

2005-12-01

The SolarSoft system (SSW) is a set of integrated software libraries, databases, and system utilities which provide a common programming and data analysis environment for solar physics. The system includes contributions from a large community base, representing the efforts of many NASA PI team MO&DA teams,spanning many years and multiple NASA and international orbital and ground based missions. The SSW general use libraries include Many hundreds of utilities which are instrument and mission independent. A large subset are also SOLAR independent, such as time conversions, digital detector cleanup, time series analysis, mathematics, image display, WWW server communications and the like. PI teams may draw on these general purpose libraries for analysis and application development while concentrating efforts on instrument specific calibration issues rather than reinvention of general use software. By the same token, PI teams are encouraged to contribute new applications or enhancements to existing utilities which may have more general interest. Recent areas of intense evolution include space weather applications, automated distributed data access and analysis, interfaces with the ongoing Virtual Solar Observatory efforts, and externalization of SolarSoft power through Web Services. We will discuss the current status of SSW web services and demonstrate how this facilitates accessing the underlying power of SolarSoft in more abstract terms. In this context, we will describe the use of SSW services within the Collaborative Sun Earth Connector environment.

SERA -- An advanced treatment planning system for neutron therapy and BNCT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigg, D.W.; Wemple, C.A.; Wessol, D.E.

1999-09-01

Detailed treatment planning calculations on a patient-specific basis are required for boron neutron capture therapy (BNCT). Two integrated treatment planning systems developed specifically for BNCT have been in clinical use in the United States over the past few years. The MacNCTPLAN BNCT treatment planning system is used in the clinical BNCT trials that are underway at the Massachusetts Institute of Technology. A second system, BNCT{_}rtpe (BNCT radiation therapy planning environment), developed independently by the Idaho national Engineering and Environmental Laboratory (INEEL) in collaboration with Montana State University (MSU), is used for treatment planning in the current series of BNCT clinicalmore » trials for glioblastoma at Brookhaven National Laboratory (BNL). This latter system is also licensed for use at several other BNCT research facilities worldwide. Although the currently available BNCT planning systems have served their purpose well, they suffer from somewhat long computation times (2 to 3 CPU-hours or more per field) relative to standard photon therapy planning software. This is largely due to the need for explicit three-dimensional solutions to the relevant transport equations. The simplifying approximations that work well for photon transport computations are not generally applicable to neutron transport computations. Greater computational speeds for BNCT treatment planning must therefore generally be achieved through the application of improved numerical techniques rather than by simplification of the governing equations. Recent efforts at INEEL and MSU have been directed toward this goal. This has resulted in a new paradigm for this type of calculation and the subsequent creation of the new simulation environment for radiotherapy applications (SERA) treatment planning system for BNCT. SERA is currently in initial clinical testing in connection with the trials at BNL, and it is expected to replace the present BNCT{_}rtpe system upon general release during 1999.« less

Study of flutter related computational procedures for minimum weight structural sizing of advanced aircraft, supplemental data

NASA Technical Reports Server (NTRS)

Oconnell, R. F.; Hassig, H. J.; Radovcich, N. A.

1975-01-01

Computational aspects of (1) flutter optimization (minimization of structural mass subject to specified flutter requirements), (2) methods for solving the flutter equation, and (3) efficient methods for computing generalized aerodynamic force coefficients in the repetitive analysis environment of computer-aided structural design are discussed. Specific areas included: a two-dimensional Regula Falsi approach to solving the generalized flutter equation; method of incremented flutter analysis and its applications; the use of velocity potential influence coefficients in a five-matrix product formulation of the generalized aerodynamic force coefficients; options for computational operations required to generate generalized aerodynamic force coefficients; theoretical considerations related to optimization with one or more flutter constraints; and expressions for derivatives of flutter-related quantities with respect to design variables.

Analysis of pilot control strategy

NASA Technical Reports Server (NTRS)

Heffley, R. K.; Hanson, G. D.; Jewell, W. F.; Clement, W. F.

1983-01-01

Methods for nonintrusive identification of pilot control strategy and task execution dynamics are presented along with examples based on flight data. The specific analysis technique is Nonintrusive Parameter Identification Procedure (NIPIP), which is described in a companion user's guide (NASA CR-170398). Quantification of pilot control strategy and task execution dynamics is discussed in general terms followed by a more detailed description of how NIPIP can be applied. The examples are based on flight data obtained from the NASA F-8 digital fly by wire airplane. These examples involve various piloting tasks and control axes as well as a demonstration of how the dynamics of the aircraft itself are identified using NIPIP. Application of NIPIP to the AFTI/F-16 flight test program is discussed. Recommendations are made for flight test applications in general and refinement of NIPIP to include interactive computer graphics.

Quality in applied science

NASA Astrophysics Data System (ADS)

Sten, T.

1993-12-01

Science is in many senses a special kind of craft and only skilled craftsmen are able to distinguish good work from bad. Due to the variation in approaches, methods and even philosophical basis, it is nearly impossible to derive a general set of quality criteria for scientific work outside specific research traditions. Applied science introduces a new set of quality criteria having to do with the application of results in practical situations and policy making. A scientist doing basic research relates mainly to the scientific community of which he is a member, while in applied contract research the scientist has to consider the impact of his results both for the immediate users and upon interest groups possibly being affected. Application thus raises a whole new set of requirements having to do with business ethics, policy consequences and societal ethics in general.

[Peroral and transdermal application of non-steroidal anti-inflammatory drugs (NSAIDs) for the treatment of regional musculoskeletal pain syndromes].

PubMed

Hodinka, László; Bálint, Géza; Budai, Erika; Géher, Pál; Papp, Renáta; Somogyi, Péter; Szántó, Sándor; Vereckei, Edit

2017-12-01

In this review the available evidences regarding the most frequently applied medication (peroral and transdermal non-steroidal anti-inflammatory agents) for the most frequent musculoskeletal complaints (regional pain syndromes) have been collected for the appropriate medical professionals who are most frequently faced with these conditions (general practitioners, rheumatologists, orthopedics, occupational and sports medicine experts). The special population at risk (with repeated and high energy overuse because of occupational or sport activities) and the pathology of their syndromes are identified. Mode of action, pharmacological properties of the non-steroidal anti-inflammatory drugs and the unwanted effects of their application especially in infants and elderly are highlighted. Recommendations of the general and specific pain management guidelines have been selected and listed in the review. Orv Hetil. 2017; 158(Suppl. 3): 3-30.