EXADS - EXPERT SYSTEM FOR AUTOMATED DESIGN SYNTHESIS

NASA Technical Reports Server (NTRS)

Rogers, J. L.

1994-01-01

The expert system called EXADS was developed to aid users of the Automated Design Synthesis (ADS) general purpose optimization program. Because of the general purpose nature of ADS, it is difficult for a nonexpert to select the best choice of strategy, optimizer, and one-dimensional search options from the one hundred or so combinations that are available. EXADS aids engineers in determining the best combination based on their knowledge of the problem and the expert knowledge previously stored by experts who developed ADS. EXADS is a customized application of the AESOP artificial intelligence program (the general version of AESOP is available separately from COSMIC. The ADS program is also available from COSMIC.) The expert system consists of two main components. The knowledge base contains about 200 rules and is divided into three categories: constrained, unconstrained, and constrained treated as unconstrained. The EXADS inference engine is rule-based and makes decisions about a particular situation using hypotheses (potential solutions), rules, and answers to questions drawn from the rule base. EXADS is backward-chaining, that is, it works from hypothesis to facts. The rule base was compiled from sources such as literature searches, ADS documentation, and engineer surveys. EXADS will accept answers such as yes, no, maybe, likely, and don't know, or a certainty factor ranging from 0 to 10. When any hypothesis reaches a confidence level of 90% or more, it is deemed as the best choice and displayed to the user. If no hypothesis is confirmed, the user can examine explanations of why the hypotheses failed to reach the 90% level. The IBM PC version of EXADS is written in IQ-LISP for execution under DOS 2.0 or higher with a central memory requirement of approximately 512K of 8 bit bytes. This program was developed in 1986.

Implementation of the Automated Numerical Model Performance Metrics System

DTIC Science & Technology

2011-09-26

question. As of this writing, the DSRC IBM AIX machines DaVinci and Pascal, and the Cray XT Einstein all use the PBS batch queuing system for...3.3). 12 Appendix A – General Automation System This system provides general purpose tools and a general way to automatically run

Multiphasic Health Testing in the Clinic Setting

PubMed Central

LaDou, Joseph

1971-01-01

The economy of automated multiphasic health testing (amht) activities patterned after the high-volume Kaiser program can be realized in low-volume settings. amht units have been operated at daily volumes of 20 patients in three separate clinical environments. These programs have displayed economics entirely compatible with cost figures published by the established high-volume centers. This experience, plus the expanding capability of small, general purpose, digital computers (minicomputers) indicates that a group of six or more physicians generating 20 laboratory appraisals per day can economically justify a completely automated multiphasic health testing facility. This system would reside in the clinic or hospital where it is used and can be configured to do analyses such as electrocardiography and generate laboratory reports, and communicate with large computer systems in university medical centers. Experience indicates that the most effective means of implementing these benefits of automation is to make them directly available to the medical community with the physician playing the central role. Economic justification of a dedicated computer through low-volume health testing then allows, as a side benefit, automation of administrative as well as other diagnostic activities—for example, patient billing, computer-aided diagnosis, and computer-aided therapeutics. PMID:4935771

MYRaf: A new Approach with IRAF for Astronomical Photometric Reduction

NASA Astrophysics Data System (ADS)

Kilic, Y.; Shameoni Niaei, M.; Özeren, F. F.; Yesilyaprak, C.

2016-12-01

In this study, the design and some developments of MYRaf software for astronomical photometric reduction are presented. MYRaf software is an easy to use, reliable, and has a fast IRAF aperture photometry GUI tools. MYRaf software is an important step for the automated software process of robotic telescopes, and uses IRAF, PyRAF, matplotlib, ginga, alipy, and Sextractor with the general-purpose and high-level programming language Python and uses the QT framework.

75 FR 7641 - Self-Regulatory Organizations; The Depository Trust Company; Notice of Filing of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-22

... Fast Automated Securities Transfer Program February 5, 2010. Pursuant to Section 19(b)(1) of the... American Depositary Receipts (``ADRs'') that are a part of DTC's Fast Automated Securities Transfer Program (``FAST''). II. Self-Regulatory Organization's Statement of the Purpose of, and Statutory Basis for, the...

Industrial Technology Modernization Program. Project 28. Automation of Receiving, Receiving Inspection and Stores

DTIC Science & Technology

1987-06-15

001 GENERAL DYNAMICS 00 FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM Phase 2 Final Project Repc t JUNG 0 ?7 PROJECT 28 AUTOMATION...DYNAMICS FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM Phase 2 Final Project Report PROJECT 28 AUTOMATION OF RECEIVING, RECEIVING...13 6 PROJECT ASSUMPTIONS 20 7 PRELIMINARY/FINAL DESIGN AND FINDINGS 21 8 SYSTEM/EQUIPMENT/MACHINING SPECIFICATIONS 37 9 VENDOR/ INDUSTRY ANALYSIS

Design Automation Using Script Languages. High-Level CAD Templates in Non-Parametric Programs

NASA Astrophysics Data System (ADS)

Moreno, R.; Bazán, A. M.

2017-10-01

The main purpose of this work is to study the advantages offered by the application of traditional techniques of technical drawing in processes for automation of the design, with non-parametric CAD programs, provided with scripting languages. Given that an example drawing can be solved with traditional step-by-step detailed procedures, is possible to do the same with CAD applications and to generalize it later, incorporating references. In today’s modern CAD applications, there are striking absences of solutions for building engineering: oblique projections (military and cavalier), 3D modelling of complex stairs, roofs, furniture, and so on. The use of geometric references (using variables in script languages) and their incorporation into high-level CAD templates allows the automation of processes. Instead of repeatedly creating similar designs or modifying their data, users should be able to use these templates to generate future variations of the same design. This paper presents the automation process of several complex drawing examples based on CAD script files aided with parametric geometry calculation tools. The proposed method allows us to solve complex geometry designs not currently incorporated in the current CAD applications and to subsequently create other new derivatives without user intervention. Automation in the generation of complex designs not only saves time but also increases the quality of the presentations and reduces the possibility of human errors.

ICECAP: an integrated, general-purpose, automation-assisted IC50/EC50 assay platform.

PubMed

Li, Ming; Chou, Judy; King, Kristopher W; Jing, Jing; Wei, Dong; Yang, Liyu

2015-02-01

IC50 and EC50 values are commonly used to evaluate drug potency. Mass spectrometry (MS)-centric bioanalytical and biomarker labs are now conducting IC50/EC50 assays, which, if done manually, are tedious and error-prone. Existing bioanalytical sample preparation automation systems cannot meet IC50/EC50 assay throughput demand. A general-purpose, automation-assisted IC50/EC50 assay platform was developed to automate the calculations of spiking solutions and the matrix solutions preparation scheme, the actual spiking and matrix solutions preparations, as well as the flexible sample extraction procedures after incubation. In addition, the platform also automates the data extraction, nonlinear regression curve fitting, computation of IC50/EC50 values, graphing, and reporting. The automation-assisted IC50/EC50 assay platform can process the whole class of assays of varying assay conditions. In each run, the system can handle up to 32 compounds and up to 10 concentration levels per compound, and it greatly improves IC50/EC50 assay experimental productivity and data processing efficiency. © 2014 Society for Laboratory Automation and Screening.

AutoStitcher: An Automated Program for Efficient and Robust Reconstruction of Digitized Whole Histological Sections from Tissue Fragments

NASA Astrophysics Data System (ADS)

Penzias, Gregory; Janowczyk, Andrew; Singanamalli, Asha; Rusu, Mirabela; Shih, Natalie; Feldman, Michael; Stricker, Phillip D.; Delprado, Warick; Tiwari, Sarita; Böhm, Maret; Haynes, Anne-Maree; Ponsky, Lee; Viswanath, Satish; Madabhushi, Anant

2016-07-01

In applications involving large tissue specimens that have been sectioned into smaller tissue fragments, manual reconstruction of a “pseudo whole-mount” histological section (PWMHS) can facilitate (a) pathological disease annotation, and (b) image registration and correlation with radiological images. We have previously presented a program called HistoStitcher, which allows for more efficient manual reconstruction than general purpose image editing tools (such as Photoshop). However HistoStitcher is still manual and hence can be laborious and subjective, especially when doing large cohort studies. In this work we present AutoStitcher, a novel automated algorithm for reconstructing PWMHSs from digitized tissue fragments. AutoStitcher reconstructs (“stitches”) a PWMHS from a set of 4 fragments by optimizing a novel cost function that is domain-inspired to ensure (i) alignment of similar tissue regions, and (ii) contiguity of the prostate boundary. The algorithm achieves computational efficiency by performing reconstruction in a multi-resolution hierarchy. Automated PWMHS reconstruction results (via AutoStitcher) were quantitatively and qualitatively compared to manual reconstructions obtained via HistoStitcher for 113 prostate pathology sections. Distances between corresponding fiducials placed on each of the automated and manual reconstruction results were between 2.7%-3.2%, reflecting their excellent visual similarity.

The Impact of Sampling Approach on Population Invariance in Automated Scoring of Essays. Research Report. ETS RR-13-18

ERIC Educational Resources Information Center

Zhang, Mo

2013-01-01

Many testing programs use automated scoring to grade essays. One issue in automated essay scoring that has not been examined adequately is population invariance and its causes. The primary purpose of this study was to investigate the impact of sampling in model calibration on population invariance of automated scores. This study analyzed scores…

32 CFR 989.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Acquisition Programs and Major Automated Information System Acquisition Programs. 1 To comply with NEPA and... ANALYSIS PROCESS (EIAP) § 989.1 Purpose. (a) This part implements the Air Force Environmental Impact Analysis Process (EIAP) and provides procedures for environmental impact analysis both within the United...

7 CFR 1902.1 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Office grant program managers. (i) Automated systems referred to in this instruction refers to the loan accounting systems; e.g., Program Loan Accounting System, Automated Multi-Housing Accounting System, and Dedicated Loan Origination System, from which loan and grant disbursements are ordered. (j) This subpart...

NASA Tech Briefs, August 2007

NASA Technical Reports Server (NTRS)

2007-01-01

Topics include: Program Merges SAR Data on Terrain and Vegetation Heights; Using G(exp 4)FETs as a Data Router for In-Plane Crossing of Signal Paths; Two Algorithms for Processing Electronic Nose Data; Radiation-Tolerant Dual Data Bus; General-Purpose Front End for Real-Time Data Processing; Nanocomposite Photoelectrochemical Cells; Ultracapacitor-Powered Cordless Drill, Cumulative Timers for Microprocessors; Photocatalytic/Magnetic Composite Particles; Separation and Sealing of a Sample Container Using Brazing; Automated Aerial Refueling Hitches a Ride on AFF; Cobra Probes Containing Replaceable Thermocouples; High-Speed Noninvasive Eye-Tracking System; Detergent-Specific Membrane Protein Crystallization Screens; Evaporation-Cooled Protective Suits for Firefighters; Plasmonic Antenna Coupling for QWIPs; Electronic Tongue Containing Redox and Conductivity Sensors; Improved Heat-Stress Algorithm; A Method of Partly Automated Testing of Software; Rover Wheel-Actuated Tool Interface; and Second-Generation Electronic Nose.

Laboratory automation of high-quality and efficient ligand-binding assays for biotherapeutic drug development.

PubMed

Wang, Jin; Patel, Vimal; Burns, Daniel; Laycock, John; Pandya, Kinnari; Tsoi, Jennifer; DeSilva, Binodh; Ma, Mark; Lee, Jean

2013-07-01

Regulated bioanalytical laboratories that run ligand-binding assays in support of biotherapeutics development face ever-increasing demand to support more projects with increased efficiency. Laboratory automation is a tool that has the potential to improve both quality and efficiency in a bioanalytical laboratory. The success of laboratory automation requires thoughtful evaluation of program needs and fit-for-purpose strategies, followed by pragmatic implementation plans and continuous user support. In this article, we present the development of fit-for-purpose automation of total walk-away and flexible modular modes. We shared the sustaining experience of vendor collaboration and team work to educate, promote and track the use of automation. The implementation of laboratory automation improves assay performance, data quality, process efficiency and method transfer to CRO in a regulated bioanalytical laboratory environment.

An Internet-based program for depressive symptoms using human and automated support: a randomized controlled trial

PubMed Central

Mira, Adriana; Bretón-López, Juana; García-Palacios, Azucena; Quero, Soledad; Baños, Rosa María; Botella, Cristina

2017-01-01

Purpose The purpose of this study was to analyze the efficacy of an Internet-based program for depressive symptoms using automated support by information and communication technologies (ICTs) and human support. Patients and methods An Internet-based program was used to teach adaptive ways to cope with depressive symptoms and daily problems. A total of 124 participants who were experiencing at least one stressful event that caused interference in their lives, many of whom had clinically significant depressive symptoms, were randomly assigned into either an intervention group with ICT support (automated mobile phone messages, automated emails, and continued feedback through the program); an intervention group with ICT support plus human support (brief weekly support phone call without clinical content); or a waiting-list control. At pre-, post-, and 12-month follow-up, they completed depression, anxiety, positive and negative effect, and perceived stress measures. Results were analyzed using both intention-to-treat and completers data. The majority were women (67.7%), with a mean age of 35.6 years (standard deviation =9.7). Results The analysis showed that the two intervention groups improved significantly pre- to posttreatment, compared with the control group. Furthermore, improvements were maintained at the 12-month follow-up. Adherence and satisfaction with the program was high in both conditions. Conclusion The Internet-based program was effective and well accepted, with and without human support, showing that ICT-based automated support may be useful. It is essential to continue to study other ICT strategies for providing support. PMID:28408833

Using Meta Analysis Techniques to Assess the Safety Effect of Red Light Running Cameras

DOT National Transportation Integrated Search

2002-02-01

Automated enforcement programs, including automated systems that are used to enforce red light running violations, have recently come under scrutiny regarding their value in terms of improving safety, their primary purpose. One of the major hurdles t...

Space station automation study: Autonomous systems and assembly, volume 2

NASA Technical Reports Server (NTRS)

Bradford, K. Z.

1984-01-01

This final report, prepared by Martin Marietta Denver Aerospace, provides the technical results of their input to the Space Station Automation Study, the purpose of which is to develop informed technical guidance in the use of autonomous systems to implement space station functions, many of which can be programmed in advance and are well suited for automated systems.

Integrated data systems : a summary report.

DOT National Transportation Integrated Search

1975-01-01

The purpose of this report is to provide a general outline of the automated data systems work under way at the Research Council. Included is a discussion of file contents, automated procedures, and outputs provided. In addition, a time schedule for i...

Hands-On TAROT: Intercontinental Use of the TAROT for Education and Public Outreach

NASA Astrophysics Data System (ADS)

Boër, M.; Thiébaut, C.; Klotz, A.; Buchholtz, G.; Melchior, A.-L.; Pennypaker, C.; Isaac, M.; Ebisuzaki, T.

The TAROT telescope has for primary goal the search for the prompt optical counterpart of cosmic Gamma-Ray Bursts. It is a completely autonomous 25cm telescope installed near Nice (France), able to point to any location of the sky within 1-2 seconds. The control, scheduling, and data processing activities are completely automated. In addition to its un-manned modes, we added recently the possibility to control the telescope remotely, as a request of the ``Hands-On Universe'' (HOU) program of using automatic telescopes for education and public outreach. To this purpose we developed a simple control interface. A webcam was installed to visualize the telescope. Access to the data is possible through a web interface. The images can be processed by the HOU software, a program specially suited for use within the classroom. We used these feature during the open days of the University of California Berkeley and the Astronomy Festival of Fleurance (France). We plan regular use for an astronomy course of the Museum of Tokyo, as well as for French schools. Not only does Hands-On TAROT gives the general public access to professional astronomy, it is also a more general tool to demonstrate the use of a complex automated system, the techniques of data processing and automation. Last but not least, through the use of telescopes located in many countries over the globe, a powerful and genuine cooperation between teachers and children from various countries is promoted, with a clear educational goal.

Automatic selection of dynamic data partitioning schemes for distributed memory multicomputers

NASA Technical Reports Server (NTRS)

Palermo, Daniel J.; Banerjee, Prithviraj

1995-01-01

For distributed memory multicomputers such as the Intel Paragon, the IBM SP-2, the NCUBE/2, and the Thinking Machines CM-5, the quality of the data partitioning for a given application is crucial to obtaining high performance. This task has traditionally been the user's responsibility, but in recent years much effort has been directed to automating the selection of data partitioning schemes. Several researchers have proposed systems that are able to produce data distributions that remain in effect for the entire execution of an application. For complex programs, however, such static data distributions may be insufficient to obtain acceptable performance. The selection of distributions that dynamically change over the course of a program's execution adds another dimension to the data partitioning problem. In this paper, we present a technique that can be used to automatically determine which partitionings are most beneficial over specific sections of a program while taking into account the added overhead of performing redistribution. This system is being built as part of the PARADIGM (PARAllelizing compiler for DIstributed memory General-purpose Multicomputers) project at the University of Illinois. The complete system will provide a fully automated means to parallelize programs written in a serial programming model obtaining high performance on a wide range of distributed-memory multicomputers.

An ultraviolet-visible spectrophotometer automation system. Part 3: Program documentation

NASA Astrophysics Data System (ADS)

Roth, G. S.; Teuschler, J. M.; Budde, W. L.

1982-07-01

The Ultraviolet-Visible Spectrophotometer (UVVIS) automation system accomplishes 'on-line' spectrophotometric quality assurance determinations, report generations, plot generations and data reduction for chlorophyll or color analysis. This system also has the capability to process manually entered data for the analysis of chlorophyll or color. For each program of the UVVIS system, this document contains a program description, flowchart, variable dictionary, code listing, and symbol cross-reference table. Also included are descriptions of file structures and of routines common to all automated analyses. The programs are written in Data General extended BASIC, Revision 4.3, under the RDOS operating systems, Revision 6.2. The BASIC code has been enhanced for real-time data acquisition, which is accomplished by CALLS to assembly language subroutines. Two other related publications are 'An Ultraviolet-Visible Spectrophotometer Automation System - Part I Functional Specifications,' and 'An Ultraviolet-Visible Spectrophotometer Automation System - Part II User's Guide.'

Reliability of an Automated High-Resolution Manometry Analysis Program across Expert Users, Novice Users, and Speech-Language Pathologists

ERIC Educational Resources Information Center

Jones, Corinne A.; Hoffman, Matthew R.; Geng, Zhixian; Abdelhalim, Suzan M.; Jiang, Jack J.; McCulloch, Timothy M.

2014-01-01

Purpose: The purpose of this study was to investigate inter- and intrarater reliability among expert users, novice users, and speech-language pathologists with a semiautomated high-resolution manometry analysis program. We hypothesized that all users would have high intrarater reliability and high interrater reliability. Method: Three expert…

A Study of the Effects of Automation on the Nature of the Work of the Draftsman in Industry, and the Innovative Programs of Instruction for Automated Drafting in Selected Junior Colleges in California to be Used for Curricular Revision. Final Report.

ERIC Educational Resources Information Center

Husung, William T., Jr.

Visits to 35 industries and professional offices throughout California and interviews of 219 draftsmen and supervisors were conducted to determine: (1) the effects of automation on the needs of industry for draftsmen with general versus specialized training, and (2) the curricular revisions in vocational drafting programs in junior colleges to…

Who Will Manage the Automated Office of the Future?

ERIC Educational Resources Information Center

Hershey, Gerald L.; And Others

1981-01-01

Discusses the need for program development in the area of general office administration. Outlines the role of personnel administrators in the selection, training, and development of managers. Three university programs relating to general office administration are described. (RC)

Welding--Trade or Profession?

ERIC Educational Resources Information Center

Albright, C. E.; Smith, Kenneth

2006-01-01

This article discusses a collaborative program between schools with the purpose of training and providing advanced education in welding. Modern manufacturing is turning to automation to increase productivity, but it can be a great challenge to program robots and other computer-controlled welding and joining systems. Computer programming and…

Features of commercial computer software systems for medical examiners and coroners.

PubMed

Hanzlick, R L; Parrish, R G; Ing, R

1993-12-01

There are many ways of automating medical examiner and coroner offices, one of which is to purchase commercial software products specifically designed for death investigation. We surveyed four companies that offer such products and requested information regarding each company and its hardware, software, operating systems, peripheral devices, applications, networking options, programming language, querying capability, coding systems, prices, customer support, and number and size of offices using the product. Although the four products (CME2, ForenCIS, InQuest, and Medical Examiner's Software System) are similar in many respects and each can be installed on personal computers, there are differences among the products with regard to cost, applications, and the other features. Death investigators interested in office automation should explore these products to determine the usefulness of each in comparison with the others and in comparison with general-purpose, off-the-shelf databases and software adaptable to death investigation needs.

Automated Test Assembly Using lp_Solve Version 5.5 in R

ERIC Educational Resources Information Center

Diao, Qi; van der Linden, Wim J.

2011-01-01

This article reviews the use of the software program lp_solve version 5.5 for solving mixed-integer automated test assembly (ATA) problems. The program is freely available under Lesser General Public License 2 (LGPL2). It can be called from the statistical language R using the lpSolveAPI interface. Three empirical problems are presented to…

12 CFR 517.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., expert witnesses, customized training, relocation services, information systems technology (computer systems, database management, software and office automation), or micrographic services; or in support of...-Owned Businesses Outreach Program (Outreach Program) is to ensure that firms owned and operated by...

12 CFR 517.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., expert witnesses, customized training, relocation services, information systems technology (computer systems, database management, software and office automation), or micrographic services; or in support of...-Owned Businesses Outreach Program (Outreach Program) is to ensure that firms owned and operated by...

12 CFR 517.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., expert witnesses, customized training, relocation services, information systems technology (computer systems, database management, software and office automation), or micrographic services; or in support of...-Owned Businesses Outreach Program (Outreach Program) is to ensure that firms owned and operated by...

An Automated Self-Learning Quantification System to Identify Visible Areas in Capsule Endoscopy Images.

PubMed

Hashimoto, Shinichi; Ogihara, Hiroyuki; Suenaga, Masato; Fujita, Yusuke; Terai, Shuji; Hamamoto, Yoshihiko; Sakaida, Isao

2017-08-01

Visibility in capsule endoscopic images is presently evaluated through intermittent analysis of frames selected by a physician. It is thus subjective and not quantitative. A method to automatically quantify the visibility on capsule endoscopic images has not been reported. Generally, when designing automated image recognition programs, physicians must provide a training image; this process is called supervised learning. We aimed to develop a novel automated self-learning quantification system to identify visible areas on capsule endoscopic images. The technique was developed using 200 capsule endoscopic images retrospectively selected from each of three patients. The rate of detection of visible areas on capsule endoscopic images between a supervised learning program, using training images labeled by a physician, and our novel automated self-learning program, using unlabeled training images without intervention by a physician, was compared. The rate of detection of visible areas was equivalent for the supervised learning program and for our automatic self-learning program. The visible areas automatically identified by self-learning program correlated to the areas identified by an experienced physician. We developed a novel self-learning automated program to identify visible areas in capsule endoscopic images.

Automated sizing of large structures by mixed optimization methods

NASA Technical Reports Server (NTRS)

Sobieszczanski, J.; Loendorf, D.

1973-01-01

A procedure for automating the sizing of wing-fuselage airframes was developed and implemented in the form of an operational program. The program combines fully stressed design to determine an overall material distribution with mass-strength and mathematical programming methods to design structural details accounting for realistic design constraints. The practicality and efficiency of the procedure is demonstrated for transport aircraft configurations. The methodology is sufficiently general to be applicable to other large and complex structures.

Advancing automation and robotics technology for the space station and the US economy

NASA Technical Reports Server (NTRS)

Cohen, A.

1985-01-01

In response to Public Law 98-371, dated July 18, 1984, the NASA Advanced Technology Advisory Committee has studied automation and rebotics for use in the space station. The Executive Overview, Volume 1 presents the major findings of the study and recommends to NASA principles for advancing automation and robotics technologies for the benefit of the space station and of the U.S. economy in general. As a result of its study, the Advanced Technology Advisory Committee believes that a key element of technology for the space station is extensive use of advanced general-purpose automation and robotics. These systems could provide the United States with important new methods of generating and exploiting space knowledge in commercial enterprises and thereby help preserve U.S. leadership in space.

Preparing for High Technology: Model Programs in the USA. Research and Development Series No. 258.

ERIC Educational Resources Information Center

Doty, Charles R.

This publication identifies exemplary programs and human resources in the automated manufacturing technologies. Its purpose is to assist vocational education program planners and curriculum specialists in updating programs and staff skills to prepare for high technology. Chapter 1 is an introduction. Chapter 2 describes the seven U.S. Secretary of…

Computing and Office Automation: Changing Variables.

ERIC Educational Resources Information Center

Staman, E. Michael

1981-01-01

Trends in computing and office automation and their applications, including planning, institutional research, and general administrative support in higher education, are discussed. Changing aspects of information processing and an increasingly larger user community are considered. The computing literacy cycle may involve programming, analysis, use…

Operations management system advanced automation: Fault detection isolation and recovery prototyping

NASA Technical Reports Server (NTRS)

Hanson, Matt

1990-01-01

The purpose of this project is to address the global fault detection, isolation and recovery (FDIR) requirements for Operation's Management System (OMS) automation within the Space Station Freedom program. This shall be accomplished by developing a selected FDIR prototype for the Space Station Freedom distributed processing systems. The prototype shall be based on advanced automation methodologies in addition to traditional software methods to meet the requirements for automation. A secondary objective is to expand the scope of the prototyping to encompass multiple aspects of station-wide fault management (SWFM) as discussed in OMS requirements documentation.

77 FR 18869 - Cable Statutory License: Specialty Station List

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

.... Sandros, Deputy General Counsel, Copyright GC/I&R, P.O. Box 70400, Southwest Station, Washington, DC 20024... television broadcast station that generally carries foreign-language, religious, and/or automated programming... Office attesting to the fact that the station's programming comports with the 1981 FCC definition, and...

Design and Stress Analysis of Low-Noise Adjusted Bearing Contact Spiral Bevel Gears

NASA Technical Reports Server (NTRS)

Fuentes, A.; Litvin, F. L.; Mullins, B. R.; Woods, R.; Handschuh, R. F.; Lewicki, David G.

2002-01-01

An integrated computerized approach for design and stress analysis of low-noise spiral bevel gear drives with adjusted bearing contact is proposed. The procedure of computations is an iterative process that requires four separate procedures and provide: (a) a parabolic function of transmission errors that is able to reduce the effect of errors of alignment on noise and vibration, and (b) reduction of the shift of bearing contact caused by misalignment. Application of finite element analysis enables us to determine the contact and bending stresses and investigate the formation of the bearing contact. The design of finite element models and boundary conditions is automated and does not require intermediate CAD computer programs for application of general purpose computer program for finite element analysis.

Automated Explanation for Educational Applications.

ERIC Educational Resources Information Center

Suthers, Daniel D.

1991-01-01

Artificial intelligence techniques available for generating explanations for teaching purposes are surveyed, and the way in which they are combined in a computer program that provides explanations is described. The program responds to questions in the physical sciences. Potential contributions of this technology to computer-based education are…

QUARTERLY TECHNICAL PROGRESS REPORT, JULY, AUGUST, SEPTEMBER 1966.

DTIC Science & Technology

Contents: Circuit research program; Hardware systems research; Software systems research program; Numerical methods, computer arithmetic and...artificial languages; Library automation; Illiac II service , use, and program development; IBM service , use, and program development; Problem specifications; Switching theory and logical design; General laboratory information.

Automated segmentation of foveal avascular zone in fundus fluorescein angiography.

PubMed

Zheng, Yalin; Gandhi, Jagdeep Singh; Stangos, Alexandros N; Campa, Claudio; Broadbent, Deborah M; Harding, Simon P

2010-07-01

PURPOSE. To describe and evaluate the performance of a computerized automated segmentation technique for use in quantification of the foveal avascular zone (FAZ). METHODS. A computerized technique for automated segmentation of the FAZ using images from fundus fluorescein angiography (FFA) was applied to 26 transit-phase images obtained from patients with various grades of diabetic retinopathy. The area containing the FAZ zone was first extracted from the original image and smoothed by a Gaussian kernel (sigma = 1.5). An initializing contour was manually placed inside the FAZ of the smoothed image and iteratively moved by the segmentation program toward the FAZ boundary. Five tests with different initializing curves were run on each of 26 images to assess reproducibility. The accuracy of the program was also validated by comparing results obtained by the program with the FAZ boundaries manually delineated by medical retina specialists. Interobserver performance was then evaluated by comparing delineations from two of the experts. RESULTS. One-way analysis of variance indicated that the disparities between different tests were not statistically significant, signifying excellent reproducibility for the computer program. There was a statistically significant linear correlation between the results obtained by automation and manual delineations by experts. CONCLUSIONS. This automated segmentation program can produce highly reproducible results that are comparable to those made by clinical experts. It has the potential to assist in the detection and management of foveal ischemia and to be integrated into automated grading systems.

Automated Literature Searches for Longitudinal Tracking of Cancer Research Training Program Graduates.

PubMed

Padilla, Luz A; Desmond, Renee A; Brooks, C Michael; Waterbor, John W

2018-06-01

A key outcome measure of cancer research training programs is the number of cancer-related peer-reviewed publications after training. Because program graduates do not routinely report their publications, staff must periodically conduct electronic literature searches on each graduate. The purpose of this study is to compare findings of an innovative computer-based automated search program versus repeated manual literature searches to identify post-training peer-reviewed publications. In late 2014, manual searches for publications by former R25 students identified 232 cancer-related articles published by 112 of 543 program graduates. In 2016, a research assistant was instructed in performing Scopus literature searches for comparison with individual PubMed searches on our 543 program graduates. Through 2014, Scopus found 304 cancer publications, 220 of that had been retrieved manually plus an additional 84 papers. However, Scopus missed 12 publications found manually. Together, both methods found 316 publications. The automated method found 96.2 % of the 316 publications while individual searches found only 73.4 %. An automated search method such as using the Scopus database is a key tool for conducting comprehensive literature searches, but it must be supplemented with periodic manual searches to find the initial publications of program graduates. A time-saving feature of Scopus is the periodic automatic alerts of new publications. Although a training period is needed and initial costs can be high, an automated search method is worthwhile due to its high sensitivity and efficiency in the long term.

75 FR 21264 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-23

... Defense. A0030-22 AMC System name: Army Food Management Information System Records System location.... 9397, as amended. Purpose(s): The Army Food Management Information System will be used to automate the...: Supervisor, Army Food Management Information System, Program Manager, 401 First Street, Suite 157, Fort Lee...

Advancing automation and robotics technology for the Space Station and for the US economy. Volume 1: Executive overview

NASA Technical Reports Server (NTRS)

1985-01-01

In response to Public Law 98-371, dated July 18, 1984, the NASA Advanced Technology Advisory Committee has studied automation and robotics for use in the Space Station. The Executive Overview, Volume 1 presents the major findings of the study and recommends to NASA principles for advancing automation and robotics technologies for the benefit of the Space Station and of the U.S. economy in general. As a result of its study, the Advanced Technology Advisory Committee believes that a key element of technology for the Space Station is extensive use of advanced general-purpose automation and robotics. These systems could provide the United States with important new methods of generating and exploiting space knowledge in commercial enterprises and thereby help preserve U.S. leadership in space.

The standard calibration instrument automation system for the atomic absorption spectrophotometer. Part 3: Program documentation

NASA Astrophysics Data System (ADS)

Ryan, D. P.; Roth, G. S.

1982-04-01

Complete documentation of the 15 programs and 11 data files of the EPA Atomic Absorption Instrument Automation System is presented. The system incorporates the following major features: (1) multipoint calibration using first, second, or third degree regression or linear interpolation, (2) timely quality control assessments for spiked samples, duplicates, laboratory control standards, reagent blanks, and instrument check standards, (3) reagent blank subtraction, and (4) plotting of calibration curves and raw data peaks. The programs of this system are written in Data General Extended BASIC, Revision 4.3, as enhanced for multi-user, real-time data acquisition. They run in a Data General Nova 840 minicomputer under the operating system RDOS, Revision 6.2. There is a functional description, a symbol definitions table, a functional flowchart, a program listing, and a symbol cross reference table for each program. The structure of every data file is also detailed.

Manned Systems Utilization Analysis. Study 2.1: Space Servicing Pilot Program Study. [for automated payloads

NASA Technical Reports Server (NTRS)

Wolfe, R. R.

1975-01-01

Space servicing automated payloads was studied for potential cost benefits for future payload operations. Background information is provided on space servicing in general, and on a pilot flight test program in particular. An fight test is recommended to demonstrate space servicing. An overall program plan is provided which builds upon the pilot program through an interim servicing capability. A multipayload servicing concept for the time when the full capability tug becomes operational is presented. The space test program is specifically designed to provide low-cost booster vehicles and a flight test platform for several experiments on a single flight.

Evolutionary and biological metaphors for engineering design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jakiela, M.

1994-12-31

Since computing became generally available, there has been strong interest in using computers to assist and automate engineering design processes. Specifically, for design optimization and automation, nonlinear programming and artificial intelligence techniques have been extensively studied. New computational techniques, based upon the natural processes of evolution, adaptation, and learing, are showing promise because of their generality and robustness. This presentation will describe the use of two such techniques, genetic algorithms and classifier systems, for a variety of engineering design problems. Structural topology optimization, meshing, and general engineering optimization are shown as example applications.

Applying Standard Interfaces to a Process-Control Language

NASA Technical Reports Server (NTRS)

Berthold, Richard T.

2005-01-01

A method of applying open-operating-system standard interfaces to the NASA User Interface Language (UIL) has been devised. UIL is a computing language that can be used in monitoring and controlling automated processes: for example, the Timeliner computer program, written in UIL, is a general-purpose software system for monitoring and controlling sequences of automated tasks in a target system. In providing the major elements of connectivity between UIL and the target system, the present method offers advantages over the prior method. Most notably, unlike in the prior method, the software description of the target system can be made independent of the applicable compiler software and need not be linked to the applicable executable compiler image. Also unlike in the prior method, it is not necessary to recompile the source code and relink the source code to a new executable compiler image. Abstraction of the description of the target system to a data file can be defined easily, with intuitive syntax, and knowledge of the source-code language is not needed for the definition.

Toward designing for trust in database automation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duez, P. P.; Jamieson, G. A.

Appropriate reliance on system automation is imperative for safe and productive work, especially in safety-critical systems. It is unsafe to rely on automation beyond its designed use; conversely, it can be both unproductive and unsafe to manually perform tasks that are better relegated to automated tools. Operator trust in automated tools mediates reliance, and trust appears to affect how operators use technology. As automated agents become more complex, the question of trust in automation is increasingly important. In order to achieve proper use of automation, we must engender an appropriate degree of trust that is sensitive to changes in operatingmore » functions and context. In this paper, we present research concerning trust in automation in the domain of automated tools for relational databases. Lee and See have provided models of trust in automation. One model developed by Lee and See identifies three key categories of information about the automation that lie along a continuum of attributional abstraction. Purpose-, process-and performance-related information serve, both individually and through inferences between them, to describe automation in such a way as to engender r properly-calibrated trust. Thus, one can look at information from different levels of attributional abstraction as a general requirements analysis for information key to appropriate trust in automation. The model of information necessary to engender appropriate trust in automation [1] is a general one. Although it describes categories of information, it does not provide insight on how to determine the specific information elements required for a given automated tool. We have applied the Abstraction Hierarchy (AH) to this problem in the domain of relational databases. The AH serves as a formal description of the automation at several levels of abstraction, ranging from a very abstract purpose-oriented description to a more concrete description of the resources involved in the automated process. The connection between an AH for an automated tool and a list of information elements at the three levels of attributional abstraction is then direct, providing a method for satisfying information requirements for appropriate trust in automation. In this paper, we will present our method for developing specific information requirements for an automated tool, based on a formal analysis of that tool and the models presented by Lee and See. We will show an example of the application of the AH to automation, in the domain of relational database automation, and the resulting set of specific information elements for appropriate trust in the automated tool. Finally, we will comment on the applicability of this approach to the domain of nuclear plant instrumentation. (authors)« less

Opportunities for Automated Demand Response in California’s Dairy Processing Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Homan, Gregory K.; Aghajanzadeh, Arian; McKane, Aimee

During periods of peak electrical demand on the energy grid or when there is a shortage of supply, the stability of the grid may be compromised or the cost of supplying electricity may rise dramatically, respectively. Demand response programs are designed to mitigate the severity of these problems and improve reliability by reducing the demand on the grid during such critical times. In 2010, the Demand Response Research Center convened a group of industry experts to suggest potential industries that would be good demand response program candidates for further review. The dairy industry was suggested due to the perception thatmore » the industry had suitable flexibility and automatic controls in place. The purpose of this report is to provide an initial description of the industry with regard to demand response potential, specifically automated demand response. This report qualitatively describes the potential for participation in demand response and automated demand response by dairy processing facilities in California, as well as barriers to widespread participation. The report first describes the magnitude, timing, location, purpose, and manner of energy use. Typical process equipment and controls are discussed, as well as common impediments to participation in demand response and automated demand response programs. Two case studies of demand response at dairy facilities in California and across the country are reviewed. Finally, recommendations are made for future research that can enhance the understanding of demand response potential in this industry.« less

Automated Analysis of Counselor Style and Effects: The Development and Evaluation of Methods and Materials to Assess the Stylistic Accuracy and Outcome Effectiveness of Counselor Verbal Behavior. Final Report.

ERIC Educational Resources Information Center

Pepyne, Edward W.

This project attempts to develop, evaluate and implement methods and materials for the automated analysis of the stylistic characteristics of counselor verbal behavior and its effects on client verbal behavior within the counseling interview. To achieve this purpose, the project designed a system of computer programs, the DISCOURSE ANALYSIS…

A Comparison of Genetic Programming Variants for Hyper-Heuristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Sean

Modern society is faced with ever more complex problems, many of which can be formulated as generate-and-test optimization problems. General-purpose optimization algorithms are not well suited for real-world scenarios where many instances of the same problem class need to be repeatedly and efficiently solved, such as routing vehicles over highways with constantly changing traffic flows, because they are not targeted to a particular scenario. Hyper-heuristics automate the design of algorithms to create a custom algorithm for a particular scenario. Hyper-heuristics typically employ Genetic Programming (GP) and this project has investigated the relationship between the choice of GP and performance inmore » Hyper-heuristics. Results are presented demonstrating the existence of problems for which there is a statistically significant performance differential between the use of different types of GP.« less

Automation pilot

NASA Technical Reports Server (NTRS)

1983-01-01

An important concept of the Action Information Management System (AIMS) approach is to evaluate office automation technology in the context of hands on use by technical program managers in the conduct of human acceptance difficulties which may accompany the transition to a significantly changing work environment. The improved productivity and communications which result from application of office automation technology are already well established for general office environments, but benefits unique to NASA are anticipated and these will be explored in detail.

Computer program CDCID: an automated quality control program using CDC update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singer, G.L.; Aguilar, F.

1984-04-01

A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. Themore » computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program.« less

General-Purpose Serial Interface For Remote Control

NASA Technical Reports Server (NTRS)

Busquets, Anthony M.; Gupton, Lawrence E.

1990-01-01

Computer controls remote television camera. General-purpose controller developed to serve as interface between host computer and pan/tilt/zoom/focus functions on series of automated video cameras. Interface port based on 8251 programmable communications-interface circuit configured for tristated outputs, and connects controller system to any host computer with RS-232 input/output (I/O) port. Accepts byte-coded data from host, compares them with prestored codes in read-only memory (ROM), and closes or opens appropriate switches. Six output ports control opening and closing of as many as 48 switches. Operator controls remote television camera by speaking commands, in system including general-purpose controller.

Kinematic synthesis of adjustable robotic mechanisms

NASA Astrophysics Data System (ADS)

Chuenchom, Thatchai

1993-01-01

Conventional hard automation, such as a linkage-based or a cam-driven system, provides high speed capability and repeatability but not the flexibility required in many industrial applications. The conventional mechanisms, that are typically single-degree-of-freedom systems, are being increasingly replaced by multi-degree-of-freedom multi-actuators driven by logic controllers. Although this new trend in sophistication provides greatly enhanced flexibility, there are many instances where the flexibility needs are exaggerated and the associated complexity is unnecessary. Traditional mechanism-based hard automation, on the other hand, neither can fulfill multi-task requirements nor are cost-effective mainly due to lack of methods and tools to design-in flexibility. This dissertation attempts to bridge this technological gap by developing Adjustable Robotic Mechanisms (ARM's) or 'programmable mechanisms' as a middle ground between high speed hard automation and expensive serial jointed-arm robots. This research introduces the concept of adjustable robotic mechanisms towards cost-effective manufacturing automation. A generalized analytical synthesis technique has been developed to support the computational design of ARM's that lays the theoretical foundation for synthesis of adjustable mechanisms. The synthesis method developed in this dissertation, called generalized adjustable dyad and triad synthesis, advances the well-known Burmester theory in kinematics to a new level. While this method provides planar solutions, a novel patented scheme is utilized for converting prescribed three-dimensional motion specifications into sets of planar projections. This provides an analytical and a computational tool for designing adjustable mechanisms that satisfy multiple sets of three-dimensional motion specifications. Several design issues were addressed, including adjustable parameter identification, branching defect, and mechanical errors. An efficient mathematical scheme for identification of adjustable member was also developed. The analytical synthesis techniques developed in this dissertation were successfully implemented in a graphic-intensive user-friendly computer program. A physical prototype of a general purpose adjustable robotic mechanism has been constructed to serve as a proof-of-concept model.

75 FR 71473 - Self-Regulatory Organizations; the Depository Trust Company; Notice of Filing of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-23

... the Requirement To Maintain a Balance Certificate in the Fast Automated Securities Transfer Program... custody a balance certificate. II. Self-Regulatory Organization's Statement of the Purpose of, and... Proposed Rule Change Under DTC's FAST program, DTC leaves securities in the form of balance certificates in...

Inventorying national forest resources...for planning-programing-budgeting system

Treesearch

Miles R. Hill; Elliot L. Amidon

1968-01-01

New systems for analyzing resource management problems, such as Planning-Programing-Budgeting, will require automated procedures to collect and assemble resource inventory data. A computer - oriented system called Map Information Assembly and Display System developed for this purpose was tested on a National Forest in California. It provided information on eight forest...

Meshing of a Spiral Bevel Gearset with 3D Finite Element Analysis

NASA Technical Reports Server (NTRS)

Bibel, George D.; Handschuh, Robert

1996-01-01

Recent advances in spiral bevel gear geometry and finite element technology make it practical to conduct a structural analysis and analytically roll the gearset through mesh. With the advent of user specific programming linked to 3D solid modelers and mesh generators, model generation has become greatly automated. Contact algorithms available in general purpose finite element codes eliminate the need for the use and alignment of gap elements. Once the gearset is placed in mesh, user subroutines attached to the FE code easily roll the gearset through mesh. The method is described in detail. Preliminary results for a gearset segment showing the progression of the contact lineload is given as the gears roll through mesh.

Automatic specification of reliability models for fault-tolerant computers

NASA Technical Reports Server (NTRS)

Liceaga, Carlos A.; Siewiorek, Daniel P.

1993-01-01

The calculation of reliability measures using Markov models is required for life-critical processor-memory-switch structures that have standby redundancy or that are subject to transient or intermittent faults or repair. The task of specifying these models is tedious and prone to human error because of the large number of states and transitions required in any reasonable system. Therefore, model specification is a major analysis bottleneck, and model verification is a major validation problem. The general unfamiliarity of computer architects with Markov modeling techniques further increases the necessity of automating the model specification. Automation requires a general system description language (SDL). For practicality, this SDL should also provide a high level of abstraction and be easy to learn and use. The first attempt to define and implement an SDL with those characteristics is presented. A program named Automated Reliability Modeling (ARM) was constructed as a research vehicle. The ARM program uses a graphical interface as its SDL, and it outputs a Markov reliability model specification formulated for direct use by programs that generate and evaluate the model.

NextGen Technologies on the FAA's Standard Terminal Automation Replacement System

NASA Technical Reports Server (NTRS)

Witzberger, Kevin; Swenson, Harry; Martin, Lynne; Lin, Melody; Cheng, Jinn-Hwei

2014-01-01

This paper describes the integration, evaluation, and results from a high-fidelity human-in-the-loop (HITL) simulation of key NASA Air Traffic Management Technology Demonstration - 1 (ATD- 1) technologies implemented in an enhanced version of the FAA's Standard Terminal Automation Replacement System (STARS) platform. These ATD-1 technologies include: (1) a NASA enhanced version of the FAA's Time-Based Flow Management, (2) a NASA ground-based automation technology known as controller-managed spacing (CMS), and (3) a NASA advanced avionics airborne technology known as flight-deck interval management (FIM). These ATD-1 technologies have been extensively tested in large-scale HITL simulations using general-purpose workstations to study air transportation technologies. These general purpose workstations perform multiple functions and are collectively referred to as the Multi-Aircraft Control System (MACS). Researchers at NASA Ames Research Center and Raytheon collaborated to augment the STARS platform by including CMS and FIM advisory tools to validate the feasibility of integrating these automation enhancements into the current FAA automation infrastructure. NASA Ames acquired three STARS terminal controller workstations, and then integrated the ATD-1 technologies. HITL simulations were conducted to evaluate the ATD-1 technologies when using the STARS platform. These results were compared with the results obtained when the ATD-1 technologies were tested in the MACS environment. Results collected from the numerical data show acceptably minor differences, and, together with the subjective controller questionnaires showing a trend towards preferring STARS, validate the ATD-1/STARS integration.

34 CFR 303.1 - Purpose of the early intervention program for infants and toddlers with disabilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Purpose of the early intervention program for infants... EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS WITH DISABILITIES General Purpose, Eligibility, and Other General Provisions § 303.1 Purpose of the early intervention program for infants and...

34 CFR 303.1 - Purpose of the early intervention program for infants and toddlers with disabilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true Purpose of the early intervention program for infants... EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS WITH DISABILITIES General Purpose, Eligibility, and Other General Provisions § 303.1 Purpose of the early intervention program for infants and...

Structural Embeddings: Mechanization with Method

NASA Technical Reports Server (NTRS)

Munoz, Cesar; Rushby, John

1999-01-01

The most powerful tools for analysis of formal specifications are general-purpose theorem provers and model checkers, but these tools provide scant methodological support. Conversely, those approaches that do provide a well-developed method generally have less powerful automation. It is natural, therefore, to try to combine the better-developed methods with the more powerful general-purpose tools. An obstacle is that the methods and the tools often employ very different logics. We argue that methods are separable from their logics and are largely concerned with the structure and organization of specifications. We, propose a technique called structural embedding that allows the structural elements of a method to be supported by a general-purpose tool, while substituting the logic of the tool for that of the method. We have found this technique quite effective and we provide some examples of its application. We also suggest how general-purpose systems could be restructured to support this activity better.

R2R--software to speed the depiction of aesthetic consensus RNA secondary structures.

PubMed

Weinberg, Zasha; Breaker, Ronald R

2011-01-04

With continuing identification of novel structured noncoding RNAs, there is an increasing need to create schematic diagrams showing the consensus features of these molecules. RNA structural diagrams are typically made either with general-purpose drawing programs like Adobe Illustrator, or with automated or interactive programs specific to RNA. Unfortunately, the use of applications like Illustrator is extremely time consuming, while existing RNA-specific programs produce figures that are useful, but usually not of the same aesthetic quality as those produced at great cost in Illustrator. Additionally, most existing RNA-specific applications are designed for drawing single RNA molecules, not consensus diagrams. We created R2R, a computer program that facilitates the generation of aesthetic and readable drawings of RNA consensus diagrams in a fraction of the time required with general-purpose drawing programs. Since the inference of a consensus RNA structure typically requires a multiple-sequence alignment, the R2R user annotates the alignment with commands directing the layout and annotation of the RNA. R2R creates SVG or PDF output that can be imported into Adobe Illustrator, Inkscape or CorelDRAW. R2R can be used to create consensus sequence and secondary structure models for novel RNA structures or to revise models when new representatives for known RNA classes become available. Although R2R does not currently have a graphical user interface, it has proven useful in our efforts to create 100 schematic models of distinct noncoding RNA classes. R2R makes it possible to obtain high-quality drawings of the consensus sequence and structural models of many diverse RNA structures with a more practical amount of effort. R2R software is available at http://breaker.research.yale.edu/R2R and as an Additional file.

7 CFR 1902.1 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... accounting systems; e.g., Program Loan Accounting System, Automated Multi-Housing Accounting System, and... Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... SUPERVISED BANK ACCOUNTS Supervised Bank Accounts of Loan, Grant, and Other Funds § 1902.1 General. This...

7 CFR 1902.1 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... accounting systems; e.g., Program Loan Accounting System, Automated Multi-Housing Accounting System, and... of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... SUPERVISED BANK ACCOUNTS Supervised Bank Accounts of Loan, Grant, and Other Funds § 1902.1 General. This...

7 CFR 1902.1 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... accounting systems; e.g., Program Loan Accounting System, Automated Multi-Housing Accounting System, and... Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... SUPERVISED BANK ACCOUNTS Supervised Bank Accounts of Loan, Grant, and Other Funds § 1902.1 General. This...

7 CFR 1902.1 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

... accounting systems; e.g., Program Loan Accounting System, Automated Multi-Housing Accounting System, and... Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... SUPERVISED BANK ACCOUNTS Supervised Bank Accounts of Loan, Grant, and Other Funds § 1902.1 General. This...

A General Tool for Evaluating High-Contrast Coronagraphic Telescope Performance Error Budgets

NASA Technical Reports Server (NTRS)

Marchen, Luis F.; Shaklan, Stuart B.

2009-01-01

This paper describes a general purpose Coronagraph Performance Error Budget (CPEB) tool that we have developed under the NASA Exoplanet Exploration Program. The CPEB automates many of the key steps required to evaluate the scattered starlight contrast in the dark hole of a space-based coronagraph. It operates in 3 steps: first, a CodeV or Zemax prescription is converted into a MACOS optical prescription. Second, a Matlab program calls ray-trace code that generates linear beam-walk and aberration sensitivity matrices for motions of the optical elements and line-of-sight pointing, with and without controlled coarse and fine-steering mirrors. Third, the sensitivity matrices are imported by macros into Excel 2007 where the error budget is created. Once created, the user specifies the quality of each optic from a predefined set of PSDs. The spreadsheet creates a nominal set of thermal and jitter motions and combines them with the sensitivity matrices to generate an error budget for the system. The user can easily modify the motion allocations to perform trade studies.

ETE: a python Environment for Tree Exploration.

PubMed

Huerta-Cepas, Jaime; Dopazo, Joaquín; Gabaldón, Toni

2010-01-13

Many bioinformatics analyses, ranging from gene clustering to phylogenetics, produce hierarchical trees as their main result. These are used to represent the relationships among different biological entities, thus facilitating their analysis and interpretation. A number of standalone programs are available that focus on tree visualization or that perform specific analyses on them. However, such applications are rarely suitable for large-scale surveys, in which a higher level of automation is required. Currently, many genome-wide analyses rely on tree-like data representation and hence there is a growing need for scalable tools to handle tree structures at large scale. Here we present the Environment for Tree Exploration (ETE), a python programming toolkit that assists in the automated manipulation, analysis and visualization of hierarchical trees. ETE libraries provide a broad set of tree handling options as well as specific methods to analyze phylogenetic and clustering trees. Among other features, ETE allows for the independent analysis of tree partitions, has support for the extended newick format, provides an integrated node annotation system and permits to link trees to external data such as multiple sequence alignments or numerical arrays. In addition, ETE implements a number of built-in analytical tools, including phylogeny-based orthology prediction and cluster validation techniques. Finally, ETE's programmable tree drawing engine can be used to automate the graphical rendering of trees with customized node-specific visualizations. ETE provides a complete set of methods to manipulate tree data structures that extends current functionality in other bioinformatic toolkits of a more general purpose. ETE is free software and can be downloaded from http://ete.cgenomics.org.

ETE: a python Environment for Tree Exploration

PubMed Central

2010-01-01

Background Many bioinformatics analyses, ranging from gene clustering to phylogenetics, produce hierarchical trees as their main result. These are used to represent the relationships among different biological entities, thus facilitating their analysis and interpretation. A number of standalone programs are available that focus on tree visualization or that perform specific analyses on them. However, such applications are rarely suitable for large-scale surveys, in which a higher level of automation is required. Currently, many genome-wide analyses rely on tree-like data representation and hence there is a growing need for scalable tools to handle tree structures at large scale. Results Here we present the Environment for Tree Exploration (ETE), a python programming toolkit that assists in the automated manipulation, analysis and visualization of hierarchical trees. ETE libraries provide a broad set of tree handling options as well as specific methods to analyze phylogenetic and clustering trees. Among other features, ETE allows for the independent analysis of tree partitions, has support for the extended newick format, provides an integrated node annotation system and permits to link trees to external data such as multiple sequence alignments or numerical arrays. In addition, ETE implements a number of built-in analytical tools, including phylogeny-based orthology prediction and cluster validation techniques. Finally, ETE's programmable tree drawing engine can be used to automate the graphical rendering of trees with customized node-specific visualizations. Conclusions ETE provides a complete set of methods to manipulate tree data structures that extends current functionality in other bioinformatic toolkits of a more general purpose. ETE is free software and can be downloaded from http://ete.cgenomics.org. PMID:20070885

Extraction of CT dose information from DICOM metadata: automated Matlab-based approach.

PubMed

Dave, Jaydev K; Gingold, Eric L

2013-01-01

The purpose of this study was to extract exposure parameters and dose-relevant indexes of CT examinations from information embedded in DICOM metadata. DICOM dose report files were identified and retrieved from a PACS. An automated software program was used to extract from these files information from the structured elements in the DICOM metadata relevant to exposure. Extracting information from DICOM metadata eliminated potential errors inherent in techniques based on optical character recognition, yielding 100% accuracy.

Second AIAA/NASA USAF Symposium on Automation, Robotics and Advanced Computing for the National Space Program

NASA Technical Reports Server (NTRS)

Myers, Dale

1987-01-01

An introduction is given to NASA goals in the development of automation (expert systems) and robotics technologies in the Space Station program. Artificial intelligence (AI) has been identified as a means to lowering ground support costs. Telerobotics will enhance space assembly, servicing and repair capabilities, and will be used for an estimated half of the necessary EVA tasks. The general principles guiding NASA in the design, development, ground-testing, interactions with industry and construction of the Space Station component systems are summarized. The telerobotics program has progressed to a point where a telerobot servicer is a firm component of the first Space Station element launch, to support assembly, maintenance and servicing of the Station. The University of Wisconsin has been selected for the establishment of a Center for the Commercial Development of Space, specializing in space automation and robotics.

Automation of a DXA-based finite element tool for clinical assessment of hip fracture risk.

PubMed

Luo, Yunhua; Ahmed, Sharif; Leslie, William D

2018-03-01

Finite element analysis of medical images is a promising tool for assessing hip fracture risk. Although a number of finite element models have been developed for this purpose, none of them have been routinely used in clinic. The main reason is that the computer programs that implement the finite element models have not been completely automated, and heavy training is required before clinicians can effectively use them. By using information embedded in clinical dual energy X-ray absorptiometry (DXA), we completely automated a DXA-based finite element (FE) model that we previously developed for predicting hip fracture risk. The automated FE tool can be run as a standalone computer program with the subject's raw hip DXA image as input. The automated FE tool had greatly improved short-term precision compared with the semi-automated version. To validate the automated FE tool, a clinical cohort consisting of 100 prior hip fracture cases and 300 matched controls was obtained from a local community clinical center. Both the automated FE tool and femoral bone mineral density (BMD) were applied to discriminate the fracture cases from the controls. Femoral BMD is the gold standard reference recommended by the World Health Organization for screening osteoporosis and for assessing hip fracture risk. The accuracy was measured by the area under ROC curve (AUC) and odds ratio (OR). Compared with femoral BMD (AUC = 0.71, OR = 2.07), the automated FE tool had a considerably improved accuracy (AUC = 0.78, OR = 2.61 at the trochanter). This work made a large step toward applying our DXA-based FE model as a routine clinical tool for the assessment of hip fracture risk. Furthermore, the automated computer program can be embedded into a web-site as an internet application. Copyright © 2017 Elsevier B.V. All rights reserved.

ICEG2D: An Integrated Software Package for Automated Prediction of Flow Fields for Single-Element Airfoils with Ice Accretion

NASA Technical Reports Server (NTRS)

Thompson, David S.; Soni, Bharat K.

2000-01-01

An integrated software package, ICEG2D, was developed to automate computational fluid dynamics (CFD) simulations for single-element airfoils with ice accretion. ICEG2D is designed to automatically perform three primary functions: (1) generating a grid-ready, surface definition based on the geometrical characteristics of the iced airfoil surface, (2) generating a high-quality grid using the generated surface point distribution, and (3) generating the input and restart files needed to run the general purpose CFD solver NPARC. ICEG2D can be executed in batch mode using a script file or in an interactive mode by entering directives from a command line. This report summarizes activities completed in the first year of a three-year research and development program to address issues related to CFD simulations for aircraft components with ice accretion. Specifically, this document describes the technology employed in the software, the installation procedure, and a description of the operation of the software package. Validation of the geometry and grid generation modules of ICEG2D is also discussed.

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

40 CFR 72.1 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... REGULATION Acid Rain Program General Provisions § 72.1 Purpose and scope. (a) Purpose. The purpose of this... affected sources and affected units under the Acid Rain Program, pursuant to title IV of the Clean Air Act... regulations under this part set forth certain generally applicable provisions under the Acid Rain Program. The...

7 CFR 226.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 226.1 Section 226.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM General § 226.1 General purpose and scope. This part announces the...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false General purpose and scope. 225.1 Section 225.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations...

Fault management for data systems

NASA Technical Reports Server (NTRS)

Boyd, Mark A.; Iverson, David L.; Patterson-Hine, F. Ann

1993-01-01

Issues related to automating the process of fault management (fault diagnosis and response) for data management systems are considered. Substantial benefits are to be gained by successful automation of this process, particularly for large, complex systems. The use of graph-based models to develop a computer assisted fault management system is advocated. The general problem is described and the motivation behind choosing graph-based models over other approaches for developing fault diagnosis computer programs is outlined. Some existing work in the area of graph-based fault diagnosis is reviewed, and a new fault management method which was developed from existing methods is offered. Our method is applied to an automatic telescope system intended as a prototype for future lunar telescope programs. Finally, an application of our method to general data management systems is described.

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

7 CFR 227.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NUTRITION EDUCATION AND TRAINING PROGRAM General § 227.1 General purpose and scope. The purpose of these regulations is to implement section 19 of the Child Nutrition Act...

Evaluating space station applications of automation and robotics technologies from a human productivity point of view

NASA Technical Reports Server (NTRS)

Bard, J. F.

1986-01-01

The role that automation, robotics, and artificial intelligence will play in Space Station operations is now beginning to take shape. Although there is only limited data on the precise nature of the payoffs that these technologies are likely to afford there is a general consensus that, at a minimum, the following benefits will be realized: increased responsiveness to innovation, lower operating costs, and reduction of exposure to hazards. Nevertheless, the question arises as to how much automation can be justified with the technical and economic constraints of the program? The purpose of this paper is to present a methodology which can be used to evaluate and rank different approaches to automating the functions and tasks planned for the Space Station. Special attention is given to the impact of advanced automation on human productivity. The methodology employed is based on the Analytic Hierarchy Process. This permits the introduction of individual judgements to resolve the confict that normally arises when incomparable criteria underly the selection process. Because of the large number of factors involved in the model, the overall problem is decomposed into four subproblems individually focusing on human productivity, economics, design, and operations, respectively. The results from each are then combined to yield the final rankings. To demonstrate the methodology, an example is developed based on the selection of an on-orbit assembly system. Five alternatives for performing this task are identified, ranging from an astronaut working in space, to a dexterous manipulator with sensory feedback. Computational results are presented along with their implications. A final parametric analysis shows that the outcome is locally insensitive to all but complete reversals in preference.

Automated data extraction from general practice records in an Australian setting: trends in influenza-like illness in sentinel general practices and emergency departments.

PubMed

Liljeqvist, Gösta T H; Staff, Michael; Puech, Michele; Blom, Hans; Torvaldsen, Siranda

2011-06-06

Influenza intelligence in New South Wales (NSW), Australia is derived mainly from emergency department (ED) presentations and hospital and intensive care admissions, which represent only a portion of influenza-like illness (ILI) in the population. A substantial amount of the remaining data lies hidden in general practice (GP) records. Previous attempts in Australia to gather ILI data from GPs have given them extra work. We explored the possibility of applying automated data extraction from GP records in sentinel surveillance in an Australian setting.The two research questions asked in designing the study were: Can syndromic ILI data be extracted automatically from routine GP data? How do ILI trends in sentinel general practice compare with ILI trends in EDs? We adapted a software program already capable of automated data extraction to identify records of patients with ILI in routine electronic GP records in two of the most commonly used commercial programs. This tool was applied in sentinel sites to gather retrospective data for May-October 2007-2009 and in real-time for the same interval in 2010. The data were compared with that provided by the Public Health Real-time Emergency Department Surveillance System (PHREDSS) and with ED data for the same periods. The GP surveillance tool identified seasonal trends in ILI both retrospectively and in near real-time. The curve of seasonal ILI was more responsive and less volatile than that of PHREDSS on a local area level. The number of weekly ILI presentations ranged from 8 to 128 at GP sites and from 0 to 18 in EDs in non-pandemic years. Automated data extraction from routine GP records offers a means to gather data without introducing any additional work for the practitioner. Adding this method to current surveillance programs will enhance their ability to monitor ILI and to detect early warning signals of new ILI events.

Determination of $sup 241$Am in soil using an automated nuclear radiation measurement laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engstrom, D.E.; White, M.G.; Dunaway, P.B.

The recent completion of REECo's Automated Laboratory and associated software systems has provided a significant increase in capability while reducing manpower requirements. The system is designed to perform gamma spectrum analyses on the large numbers of samples required by the current Nevada Applied Ecology Group (NAEG) and Plutonium Distribution Inventory Program (PDIP) soil sampling programs while maintaining sufficient sensitivities as defined by earlier investigations of the same type. The hardware and systems are generally described in this paper, with emphasis being placed on spectrum reduction and the calibration procedures used for soil samples. (auth)

Medical Signal-Conditioning and Data-Interface System

NASA Technical Reports Server (NTRS)

Braun, Jeffrey; Jacobus, charles; Booth, Scott; Suarez, Michael; Smith, Derek; Hartnagle, Jeffrey; LePrell, Glenn

2006-01-01

A general-purpose portable, wearable electronic signal-conditioning and data-interface system is being developed for medical applications. The system can acquire multiple physiological signals (e.g., electrocardiographic, electroencephalographic, and electromyographic signals) from sensors on the wearer s body, digitize those signals that are received in analog form, preprocess the resulting data, and transmit the data to one or more remote location(s) via a radiocommunication link and/or the Internet. The system includes a computer running data-object-oriented software that can be programmed to configure the system to accept almost any analog or digital input signals from medical devices. The computing hardware and software implement a general-purpose data-routing-and-encapsulation architecture that supports tagging of input data and routing the data in a standardized way through the Internet and other modern packet-switching networks to one or more computer(s) for review by physicians. The architecture supports multiple-site buffering of data for redundancy and reliability, and supports both real-time and slower-than-real-time collection, routing, and viewing of signal data. Routing and viewing stations support insertion of automated analysis routines to aid in encoding, analysis, viewing, and diagnosis.

Documentation of the runqual module for ADDAMS: Comparison of predicted runoff water quality with standards. Environmental effects of dredging. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schroeder, P.R.; Gibson, A.C.; Dardeau, E.A.

This technical note has a twofold purpose: to describe a technique for comparing the predicted quality of surface runoff from confined dredged material disposal areas with applicable water quality standards and to document a computer program called RUNQUAL, written for that purpose as a part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

7 CFR 220.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM § 220.1 General purpose and scope. This part... initiate, maintain, or expand nonprofit breakfast programs in schools. [Amdt. 25, 41 FR 34758, Aug. 17...

7 CFR 220.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SCHOOL BREAKFAST PROGRAM § 220.1 General purpose and scope. This part... initiate, maintain, or expand nonprofit breakfast programs in schools. [Amdt. 25, 41 FR 34758, Aug. 17...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 249.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SENIOR FARMERS' MARKET NUTRITION PROGRAM (SFMNP) General § 249.1 General... carry out the Senior Farmers' Market Nutrition Program (SFMNP). The purposes of the SFMNP are to: (1...

7 CFR 248.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS WIC FARMERS' MARKET NUTRITION PROGRAM (FMNP) General § 248.1 General... out the WIC Farmers' Market Nutrition Program. The dual purposes of the FMNP are: (a) To provide...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations under which the Secretary will administer a Summer Food Service... nonprofit food service programs for children during the summer months and at other approved times. The...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations under which the Secretary will administer a Summer Food Service... nonprofit food service programs for children during the summer months and at other approved times. The...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations under which the Secretary will administer a Summer Food Service... nonprofit food service programs for children during the summer months and at other approved times. The...

7 CFR 225.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AGRICULTURE CHILD NUTRITION PROGRAMS SUMMER FOOD SERVICE PROGRAM General § 225.1 General purpose and scope. This part establishes the regulations under which the Secretary will administer a Summer Food Service... nonprofit food service programs for children during the summer months and at other approved times. The...

Automated a complex computer aided design concept generated using macros programming

NASA Astrophysics Data System (ADS)

Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

2013-12-01

Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

CORSS: Cylinder Optimization of Rings, Skin, and Stringers

NASA Technical Reports Server (NTRS)

Finckenor, J.; Rogers, P.; Otte, N.

1994-01-01

Launch vehicle designs typically make extensive use of cylindrical skin stringer construction. Structural analysis methods are well developed for preliminary design of this type of construction. This report describes an automated, iterative method to obtain a minimum weight preliminary design. Structural optimization has been researched extensively, and various programs have been written for this purpose. Their complexity and ease of use depends on their generality, the failure modes considered, the methodology used, and the rigor of the analysis performed. This computer program employs closed-form solutions from a variety of well-known structural analysis references and joins them with a commercially available numerical optimizer called the 'Design Optimization Tool' (DOT). Any ring and stringer stiffened shell structure of isotropic materials that has beam type loading can be analyzed. Plasticity effects are not included. It performs a more limited analysis than programs such as PANDA, but it provides an easy and useful preliminary design tool for a large class of structures. This report briefly describes the optimization theory, outlines the development and use of the program, and describes the analysis techniques that are used. Examples of program input and output, as well as the listing of the analysis routines, are included.

Automated optimization techniques for aircraft synthesis

NASA Technical Reports Server (NTRS)

Vanderplaats, G. N.

1976-01-01

Application of numerical optimization techniques to automated conceptual aircraft design is examined. These methods are shown to be a general and efficient way to obtain quantitative information for evaluating alternative new vehicle projects. Fully automated design is compared with traditional point design methods and time and resource requirements for automated design are given. The NASA Ames Research Center aircraft synthesis program (ACSYNT) is described with special attention to calculation of the weight of a vehicle to fly a specified mission. The ACSYNT procedures for automatically obtaining sensitivity of the design (aircraft weight, performance and cost) to various vehicle, mission, and material technology parameters are presented. Examples are used to demonstrate the efficient application of these techniques.

Robot graphic simulation testbed

NASA Technical Reports Server (NTRS)

Cook, George E.; Sztipanovits, Janos; Biegl, Csaba; Karsai, Gabor; Springfield, James F.

1991-01-01

The objective of this research was twofold. First, the basic capabilities of ROBOSIM (graphical simulation system) were improved and extended by taking advantage of advanced graphic workstation technology and artificial intelligence programming techniques. Second, the scope of the graphic simulation testbed was extended to include general problems of Space Station automation. Hardware support for 3-D graphics and high processing performance make high resolution solid modeling, collision detection, and simulation of structural dynamics computationally feasible. The Space Station is a complex system with many interacting subsystems. Design and testing of automation concepts demand modeling of the affected processes, their interactions, and that of the proposed control systems. The automation testbed was designed to facilitate studies in Space Station automation concepts.

7 CFR 226.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM General § 226.1 General purpose and... Child and Adult Care Food Program. Section 17 of the National School Lunch Act, as amended, authorizes...

7 CFR 215.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.1 General purpose and scope. This... Program for Children, under the Child Nutrition Act of 1966, as amended, and sets forth the general...

7 CFR 215.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.1 General purpose and scope. This... Program for Children, under the Child Nutrition Act of 1966, as amended, and sets forth the general...

7 CFR 215.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.1 General purpose and scope. This... Program for Children, under the Child Nutrition Act of 1966, as amended, and sets forth the general...

7 CFR 226.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM General § 226.1 General purpose and... Child and Adult Care Food Program. Section 17 of the National School Lunch Act, as amended, authorizes...

7 CFR 215.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.1 General purpose and scope. This... Program for Children, under the Child Nutrition Act of 1966, as amended, and sets forth the general...

7 CFR 215.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS SPECIAL MILK PROGRAM FOR CHILDREN § 215.1 General purpose and scope. This... Program for Children, under the Child Nutrition Act of 1966, as amended, and sets forth the general...

7 CFR 226.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM General § 226.1 General purpose and... Child and Adult Care Food Program. Section 17 of the National School Lunch Act, as amended, authorizes...

7 CFR 226.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS CHILD AND ADULT CARE FOOD PROGRAM General § 226.1 General purpose and... Child and Adult Care Food Program. Section 17 of the National School Lunch Act, as amended, authorizes...

Anxiety Online—A Virtual Clinic: Preliminary Outcomes Following Completion of Five Fully Automated Treatment Programs for Anxiety Disorders and Symptoms

PubMed Central

Meyer, Denny; Austin, David William; Kyrios, Michael

2011-01-01

Background The development of e-mental health interventions to treat or prevent mental illness and to enhance wellbeing has risen rapidly over the past decade. This development assists the public in sidestepping some of the obstacles that are often encountered when trying to access traditional face-to-face mental health care services. Objective The objective of our study was to investigate the posttreatment effectiveness of five fully automated self-help cognitive behavior e-therapy programs for generalized anxiety disorder (GAD), panic disorder with or without agoraphobia (PD/A), obsessive–compulsive disorder (OCD), posttraumatic stress disorder (PTSD), and social anxiety disorder (SAD) offered to the international public via Anxiety Online, an open-access full-service virtual psychology clinic for anxiety disorders. Methods We used a naturalistic participant choice, quasi-experimental design to evaluate each of the five Anxiety Online fully automated self-help e-therapy programs. Participants were required to have at least subclinical levels of one of the anxiety disorders to be offered the associated disorder-specific fully automated self-help e-therapy program. These programs are offered free of charge via Anxiety Online. Results A total of 225 people self-selected one of the five e-therapy programs (GAD, n = 88; SAD, n = 50; PD/A, n = 40; PTSD, n = 30; OCD, n = 17) and completed their 12-week posttreatment assessment. Significant improvements were found on 21/25 measures across the five fully automated self-help programs. At postassessment we observed significant reductions on all five anxiety disorder clinical disorder severity ratings (Cohen d range 0.72–1.22), increased confidence in managing one’s own mental health care (Cohen d range 0.70–1.17), and decreases in the total number of clinical diagnoses (except for the PD/A program, where a positive trend was found) (Cohen d range 0.45–1.08). In addition, we found significant improvements in quality of life for the GAD, OCD, PTSD, and SAD e-therapy programs (Cohen d range 0.11–0.96) and significant reductions relating to general psychological distress levels for the GAD, PD/A, and PTSD e-therapy programs (Cohen d range 0.23–1.16). Overall, treatment satisfaction was good across all five e-therapy programs, and posttreatment assessment completers reported using their e-therapy program an average of 395.60 (SD 272.2) minutes over the 12-week treatment period. Conclusions Overall, all five fully automated self-help e-therapy programs appear to be delivering promising high-quality outcomes; however, the results require replication. Trial Registration Australian and New Zealand Clinical Trials Registry ACTRN121611000704998; http://www.anzctr.org.au/trial_view.aspx?ID=336143 (Archived by WebCite at http://www.webcitation.org/618r3wvOG) PMID:22057287

41 CFR 60-741.40 - General purpose and applicability of the affirmative action program requirement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 41 Public Contracts and Property Management 1 2014-07-01 2014-07-01 false General purpose and... Property Management Other Provisions Relating to Public Contracts OFFICE OF FEDERAL CONTRACT COMPLIANCE... requirement. (a) General purpose. An affirmative action program is a management tool designed to ensure equal...

76 FR 69288 - Cable Statutory License: Specialty Station List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

..., Copyright GC/I&R, P.O. Box 70400, Southwest Station, Washington, DC 20024. Telephone: (202) 707-8380... generally carries foreign-language, religious, and/or automated programming in one-third of the hours of an... the station to file an affidavit with the Office attesting to the fact that the station's programming...

A semi-automated measurement technique for the assessment of radiolucency.

PubMed

Pegg, E C; Kendrick, B J L; Pandit, H G; Gill, H S; Murray, D W

2014-07-06

The assessment of radiolucency around an implant is qualitative, poorly defined and has low agreement between clinicians. Accurate and repeatable assessment of radiolucency is essential to prevent misdiagnosis, minimize cases of unnecessary revision, and to correctly monitor and treat patients at risk of loosening and implant failure. The purpose of this study was to examine whether a semi-automated imaging algorithm could improve repeatability and enable quantitative assessment of radiolucency. Six surgeons assessed 38 radiographs of knees after unicompartmental knee arthroplasty for radiolucency, and results were compared with assessments made by the semi-automated program. Large variation was found between the surgeon results, with total agreement in only 9.4% of zones and a kappa value of 0.602; whereas the automated program had total agreement in 81.6% of zones and a kappa value of 0.802. The software had a 'fair to excellent' prediction of the presence or the absence of radiolucency, where the area under the curve of the receiver operating characteristic curves was 0.82 on average. The software predicted radiolucency equally well for cemented and cementless implants (p = 0.996). The identification of radiolucency using an automated method is feasible and these results indicate that it could aid the definition and quantification of radiolucency.

Acquisition-Management Program

NASA Technical Reports Server (NTRS)

Avery, Don E.; Vann, A. Vernon; Jones, Richard H.; Rew, William E.

1987-01-01

NASA Acquisition Management Subsystem (AMS) program integrated NASA-wide standard automated-procurement-system program developed in 1985. Designed to provide each NASA installation with procurement data-base concept with on-line terminals for managing, tracking, reporting, and controlling contractual actions and associated procurement data. Subsystem provides control, status, and reporting for various procurement areas. Purpose of standardization is to decrease costs of procurement and operation of automatic data processing; increases procurement productivity; furnishes accurate, on-line management information and improves customer support. Written in the ADABAS NATURAL.

Industrial Technology Modernization Program. Project 20. Consolidation and Automation of Material and Tool Storage. Phase 2

DTIC Science & Technology

1987-06-15

GENERAL DYNAMICS FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY00 N MODERNIZATION PROGRAM Phase 2 Final Project Report DT C JUNO 7 1989J1K PROJECT 20...CLASSIFICATION O THIS PAGE All other editions are obsolete. unclassified Honeywell JUNE 15, 1987 GENERAL DYNAMICS FORT WORTH DIVISION INDUSTRIAL ...SYSTEMIEQUIPMENT/MACHINING SPECIFICATIONS 33 9 VENDOR/ INDUSTRY ANALYSIS FINDING 39 10 MIS REQUIREMENTS/IMPROVEMENTS 45 11 COST BENEFIT ANALYSIS 48 12 IMPLEMENTATION

40 CFR 195.1 - Purpose and applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS RADON PROFICIENCY PROGRAMS General Provisions § 195.1 Purpose and applicability. (a) Purpose. The... following programs: The National Radon Measurement Proficiency (RMP) Program, the individual proficiency component of the RMP Program, and the National Radon Contractor Proficiency (RCP) Program. (b) Applicability...

40 CFR 195.1 - Purpose and applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROGRAMS RADON PROFICIENCY PROGRAMS General Provisions § 195.1 Purpose and applicability. (a) Purpose. The... following programs: The National Radon Measurement Proficiency (RMP) Program, the individual proficiency component of the RMP Program, and the National Radon Contractor Proficiency (RCP) Program. (b) Applicability...

Synthesizing Certified Code

NASA Technical Reports Server (NTRS)

Whalen, Michael; Schumann, Johann; Fischer, Bernd

2002-01-01

Code certification is a lightweight approach to demonstrate software quality on a formal level. Its basic idea is to require producers to provide formal proofs that their code satisfies certain quality properties. These proofs serve as certificates which can be checked independently. Since code certification uses the same underlying technology as program verification, it also requires many detailed annotations (e.g., loop invariants) to make the proofs possible. However, manually adding theses annotations to the code is time-consuming and error-prone. We address this problem by combining code certification with automatic program synthesis. We propose an approach to generate simultaneously, from a high-level specification, code and all annotations required to certify generated code. Here, we describe a certification extension of AUTOBAYES, a synthesis tool which automatically generates complex data analysis programs from compact specifications. AUTOBAYES contains sufficient high-level domain knowledge to generate detailed annotations. This allows us to use a general-purpose verification condition generator to produce a set of proof obligations in first-order logic. The obligations are then discharged using the automated theorem E-SETHEO. We demonstrate our approach by certifying operator safety for a generated iterative data classification program without manual annotation of the code.

R2R - software to speed the depiction of aesthetic consensus RNA secondary structures

PubMed Central

2011-01-01

Background With continuing identification of novel structured noncoding RNAs, there is an increasing need to create schematic diagrams showing the consensus features of these molecules. RNA structural diagrams are typically made either with general-purpose drawing programs like Adobe Illustrator, or with automated or interactive programs specific to RNA. Unfortunately, the use of applications like Illustrator is extremely time consuming, while existing RNA-specific programs produce figures that are useful, but usually not of the same aesthetic quality as those produced at great cost in Illustrator. Additionally, most existing RNA-specific applications are designed for drawing single RNA molecules, not consensus diagrams. Results We created R2R, a computer program that facilitates the generation of aesthetic and readable drawings of RNA consensus diagrams in a fraction of the time required with general-purpose drawing programs. Since the inference of a consensus RNA structure typically requires a multiple-sequence alignment, the R2R user annotates the alignment with commands directing the layout and annotation of the RNA. R2R creates SVG or PDF output that can be imported into Adobe Illustrator, Inkscape or CorelDRAW. R2R can be used to create consensus sequence and secondary structure models for novel RNA structures or to revise models when new representatives for known RNA classes become available. Although R2R does not currently have a graphical user interface, it has proven useful in our efforts to create 100 schematic models of distinct noncoding RNA classes. Conclusions R2R makes it possible to obtain high-quality drawings of the consensus sequence and structural models of many diverse RNA structures with a more practical amount of effort. R2R software is available at http://breaker.research.yale.edu/R2R and as an Additional file. PMID:21205310

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 1: HARP introduction and user's guide

NASA Technical Reports Server (NTRS)

Bavuso, Salvatore J.; Rothmann, Elizabeth; Dugan, Joanne Bechta; Trivedi, Kishor S.; Mittal, Nitin; Boyd, Mark A.; Geist, Robert M.; Smotherman, Mark D.

1994-01-01

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed to be compatible with most computing platforms and operating systems, and some programs have been beta tested, within the aerospace community for over 8 years. Volume 1 provides an introduction to the HARP program. Comprehensive information on HARP mathematical models can be found in the references.

Working Notes from the 1992 AAAI Workshop on Automating Software Design. Theme: Domain Specific Software Design

NASA Technical Reports Server (NTRS)

Keller, Richard M. (Editor); Barstow, David; Lowry, Michael R.; Tong, Christopher H.

1992-01-01

The goal of this workshop is to identify different architectural approaches to building domain-specific software design systems and to explore issues unique to domain-specific (vs. general-purpose) software design. Some general issues that cut across the particular software design domain include: (1) knowledge representation, acquisition, and maintenance; (2) specialized software design techniques; and (3) user interaction and user interface.

Operator modeling in commerical aviation: Cognitive models, intelligent displays, and pilot's assistants

NASA Technical Reports Server (NTRS)

Govindaraj, T.; Mitchell, C. M.

1994-01-01

One of the goals of the National Aviation Safety/Automation program is to address the issue of human-centered automation in the cockpit. Human-centered automation is automation that, in the cockpit, enhances or assists the crew rather than replacing them. The Georgia Tech research program focused on this general theme, with emphasis on designing a computer-based pilot's assistant, intelligent (i.e, context-sensitive) displays, and an intelligent tutoring system for understanding and operating the autoflight system. In particular, the aids and displays were designed to enhance the crew's situational awareness of the current state of the automated flight systems and to assist the crew's situational awareness of the current state of the automated flight systems and to assist the crew in coordinating the autoflight system resources. The activities of this grant included: (1) an OFMspert to understand pilot navigation activities in a 727 class aircraft; (2) an extension of OFMspert to understand mode control in a glass cockpit, Georgia Tech Crew Activity Tracking System (GT-CATS); (3) the design of a training system to teach pilots about the vertical navigation portion of the flight management system -VNAV Tutor; and (4) a proof-of-concept display, using existing display technology, to facilitate mode awareness, particularly in situations in which controlled flight into terrain (CFIT) is a potential.

Vote Stuffing Control in IPTV-based Recommender Systems

NASA Astrophysics Data System (ADS)

Bhatt, Rajen

Vote stuffing is a general problem in the functioning of the content rating-based recommender systems. Currently IPTV viewers browse various contents based on the program ratings. In this paper, we propose a fuzzy clustering-based approach to remove the effects of vote stuffing and consider only the genuine ratings for the programs over multiple genres. The approach requires only one authentic rating, which is generally available from recommendation system administrators or program broadcasters. The entire process is automated using fuzzy c-means clustering. Computational experiments performed over one real-world program rating database shows that the proposed approach is very efficient for controlling vote stuffing.

Automated Hypothesis Tests and Standard Errors for Nonstandard Problems with Description of Computer Package: A Draft.

ERIC Educational Resources Information Center

Lord, Frederic M.; Stocking, Martha

A general Computer program is described that will compute asymptotic standard errors and carry out significance tests for an endless variety of (standard and) nonstandard large-sample statistical problems, without requiring the statistician to derive asymptotic standard error formulas. The program assumes that the observations have a multinormal…

Users guide to E859 phoswich analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Costales, J.B.

1992-11-30

In this memo the authors describe the analysis path used to transform the phoswich data from raw data banks into cross sections suitable for publication. The primary purpose of this memo is not to document each analysis step in great detail but rather to point the reader to the fortran code used and to point out the essential features of the analysis path. A flow chart which summarizes the various steps performed to massage the data from beginning to end is given. In general, each step corresponds to a fortran program which was written to perform that particular task. Themore » automation of the data analysis has been kept purposefully minimal in order to ensure the highest quality of the final product. However, tools have been developed which ease the non--automated steps. There are two major parallel routes for the data analysis: data reduction and acceptance determination using detailed GEANT Monte Carlo simulations. In this memo, the authors will first describe the data reduction up to the point where PHAD banks (Pass 1-like banks) are created. They the will describe the steps taken in the GEANT Monte Carlo route. Note that a detailed memo describing the methodology of the acceptance corrections has already been written. Therefore the discussion of the acceptance determination will be kept to a minimum and the reader will be referred to the other memo for further details. Finally, they will describe the cross section formation process and how final spectra are extracted.« less

General Medical Surveillance Program

NASA Technical Reports Server (NTRS)

1993-01-01

Background on the General Medical Surveillance Program at LeRC is presented. The purpose of the General Medical Surveillance Program at LeRC is outlined, and the specifics of the program are discussed.

Computer program for the automated attendance accounting system

NASA Technical Reports Server (NTRS)

Poulson, P.; Rasmusson, C.

1971-01-01

The automated attendance accounting system (AAAS) was developed under the auspices of the Space Technology Applications Program. The task is basically the adaptation of a small digital computer, coupled with specially developed pushbutton terminals located in school classrooms and offices for the purpose of taking daily attendance, maintaining complete attendance records, and producing partial and summary reports. Especially developed for high schools, the system is intended to relieve both teachers and office personnel from the time-consuming and dreary task of recording and analyzing the myriad classroom attendance data collected throughout the semester. In addition, since many school district budgets are related to student attendance, the increase in accounting accuracy is expected to augment district income. A major component of this system is the real-time AAAS software system, which is described.

Which Do Students Prefer to Evaluate Their Essays: Peers or Computer Program

ERIC Educational Resources Information Center

Lai, Yi-hsiu

2010-01-01

The purpose of this study was to investigate problems and potentials of new technologies in English writing education. The effectiveness of automated writing evaluation (AWE) ("MY Access") and of peer evaluation (PE) was compared. Twenty-two English as a foreign language (EFL) learners in Taiwan participated in this study. They submitted…

A Virtual Environment for Process Management. A Step by Step Implementation

ERIC Educational Resources Information Center

Mayer, Sergio Valenzuela

2003-01-01

In this paper it is presented a virtual organizational environment, conceived with the integration of three computer programs: a manufacturing simulation package, an automation of businesses processes (workflows), and business intelligence (Balanced Scorecard) software. It was created as a supporting tool for teaching IE, its purpose is to give…

DESAP 1: A structural design program with stress and displacement constraints. Volume 1: Theoretical and user's manual

NASA Technical Reports Server (NTRS)

Kiusalaas, J.; Reddy, G. B.

1977-01-01

A finite element program is presented for computer-automated, minimum weight design of elastic structures with constraints on stresses (including local instability criteria) and displacements. Volume 1 of the report contains the theoretical and user's manual of the program. Sample problems and the listing of the program are included in Volumes 2 and 3. The element subroutines are organized so as to facilitate additions and changes by the user. As a result, a relatively minor programming effort would be required to make DESAP 1 into a special purpose program to handle the user's specific design requirements and failure criteria.

Evolution paths for advanced automation

NASA Technical Reports Server (NTRS)

Healey, Kathleen J.

1990-01-01

As Space Station Freedom (SSF) evolves, increased automation and autonomy will be required to meet Space Station Freedom Program (SSFP) objectives. As a precursor to the use of advanced automation within the SSFP, especially if it is to be used on SSF (e.g., to automate the operation of the flight systems), the underlying technologies will need to be elevated to a high level of readiness to ensure safe and effective operations. Ground facilities supporting the development of these flight systems -- from research and development laboratories through formal hardware and software development environments -- will be responsible for achieving these levels of technology readiness. These facilities will need to evolve support the general evolution of the SSFP. This evolution will include support for increasing the use of advanced automation. The SSF Advanced Development Program has funded a study to define evolution paths for advanced automaton within the SSFP's ground-based facilities which will enable, promote, and accelerate the appropriate use of advanced automation on-board SSF. The current capability of the test beds and facilities, such as the Software Support Environment, with regard to advanced automation, has been assessed and their desired evolutionary capabilities have been defined. Plans and guidelines for achieving this necessary capability have been constructed. The approach taken has combined indepth interviews of test beds personnel at all SSF Work Package centers with awareness of relevant state-of-the-art technology and technology insertion methodologies. Key recommendations from the study include advocating a NASA-wide task force for advanced automation, and the creation of software prototype transition environments to facilitate the incorporation of advanced automation in the SSFP.

14 CFR 120.103 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND OPERATORS FOR COMPENSATION OR HIRE: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Drug Testing Program Requirements § 120.103 General. (a) Purpose. The purpose of this subpart is to... ensure that drug testing programs conducted pursuant to 14 CFR parts 65, 91, 121, and 135 comply with the...

14 CFR 120.103 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND OPERATORS FOR COMPENSATION OR HIRE: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Drug Testing Program Requirements § 120.103 General. (a) Purpose. The purpose of this subpart is to... ensure that drug testing programs conducted pursuant to 14 CFR parts 65, 91, 121, and 135 comply with the...

14 CFR 120.103 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND OPERATORS FOR COMPENSATION OR HIRE: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Drug Testing Program Requirements § 120.103 General. (a) Purpose. The purpose of this subpart is to... ensure that drug testing programs conducted pursuant to 14 CFR parts 65, 91, 121, and 135 comply with the...

14 CFR 120.103 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND OPERATORS FOR COMPENSATION OR HIRE: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Drug Testing Program Requirements § 120.103 General. (a) Purpose. The purpose of this subpart is to... ensure that drug testing programs conducted pursuant to 14 CFR parts 65, 91, 121, and 135 comply with the...

Optimization-based interactive segmentation interface for multiregion problems

PubMed Central

Baxter, John S. H.; Rajchl, Martin; Peters, Terry M.; Chen, Elvis C. S.

2016-01-01

Abstract. Interactive segmentation is becoming of increasing interest to the medical imaging community in that it combines the positive aspects of both manual and automated segmentation. However, general-purpose tools have been lacking in terms of segmenting multiple regions simultaneously with a high degree of coupling between groups of labels. Hierarchical max-flow segmentation has taken advantage of this coupling for individual applications, but until recently, these algorithms were constrained to a particular hierarchy and could not be considered general-purpose. In a generalized form, the hierarchy for any given segmentation problem is specified in run-time, allowing different hierarchies to be quickly explored. We present an interactive segmentation interface, which uses generalized hierarchical max-flow for optimization-based multiregion segmentation guided by user-defined seeds. Applications in cardiac and neonatal brain segmentation are given as example applications of its generality. PMID:27335892

An Attempt of Formalizing the Selection Parameters for Settlements Generalization in Small-Scales

NASA Astrophysics Data System (ADS)

Karsznia, Izabela

2014-12-01

The paper covers one of the most important problems concerning context-sensitive settlement selection for the purpose of the small-scale maps. So far, no formal parameters for small-scale settlements generalization have been specified, hence the problem seems to be an important and innovative challenge. It is also crucial from the practical point of view as it is necessary to develop appropriate generalization algorithms for the purpose of the General Geographic Objects Database generalization which is the essential Spatial Data Infrastructure component in Poland. The author proposes and verifies quantitative generalization parameters for the purpose of the settlement selection process in small-scale maps. The selection of settlements was carried out in two research areas - in Lower Silesia and Łódź Province. Based on the conducted analysis appropriate contextual-sensitive settlements selection parameters have been defined. Particular effort has been made to develop a methodology of quantitative settlements selection which would be useful in the automation processes and that would make it possible to keep specifics of generalized objects unchanged.

Poster - 09: A MATLAB-based Program for Automated Quality Assurance of a Prostate Brachytherapy Ultrasound System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poon, Justin; Sabondjian, Eric; Sankreacha, Raxa

Purpose: A robust Quality Assurance (QA) program is essential for prostate brachytherapy ultrasound systems due to the importance of imaging accuracy during treatment and planning. Task Group 128 of the American Association of Physicists in Medicine has recommended a set of QA tests covering grayscale visibility, depth of penetration, axial and lateral resolution, distance measurement, area measurement, volume measurement, and template/electronic grid alignment. Making manual measurements on the ultrasound system can be slow and inaccurate, so a MATLAB program was developed for automation of the described tests. Methods: Test images were acquired using a BK Medical Flex Focus 400 ultrasoundmore » scanner and 8848 transducer with the CIRS Brachytherapy QA Phantom – Model 045A. For each test, the program automatically segments the inputted image(s), makes the appropriate measurements, and indicates if the test passed or failed. The program was tested by analyzing two sets of images, where the measurements from the first set were used as baseline values. Results: The program successfully analyzed the images for each test and determined if any action limits were exceeded. All tests passed – the measurements made by the program were consistent and met the requirements outlined by Task Group 128. Conclusions: The MATLAB program we have developed can be used for automated QA of an ultrasound system for prostate brachytherapy. The GUI provides a user-friendly way to analyze images without the need for any manual measurement, potentially removing intra- and inter-user variability for more consistent results.« less

SIG: a general-purpose signal processing program. User's manual. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lager, D.; Azevedo, S.

1985-05-09

SIG is a general-purpose signal processing, analysis, and display program. Its main purpose is to perform manipulations on time-domain and frequenccy-domain signals. The manual contains a complete description of the SIG program from the user's stand-point. A brief exercise in using SIG is shown. Complete descriptions are given of each command in the SIG core. General information about the SIG structure, command processor, and graphics options are provided. An example usage of SIG for solving a problem is developed, and error message formats are briefly discussed. (LEW)

7 CFR 210.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM General § 210.1 General purpose and scope... is declared to be the policy of Congress, as a measure of national security, to safeguard the health...

7 CFR 210.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM General § 210.1 General purpose and scope... is declared to be the policy of Congress, as a measure of national security, to safeguard the health...

7 CFR 210.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM General § 210.1 General purpose and scope... is declared to be the policy of Congress, as a measure of national security, to safeguard the health...

7 CFR 210.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM General § 210.1 General purpose and scope... is declared to be the policy of Congress, as a measure of national security, to safeguard the health...

7 CFR 210.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM General § 210.1 General purpose and scope... is declared to be the policy of Congress, as a measure of national security, to safeguard the health...

24 CFR 257.1 - Purpose of program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... DEVELOPMENT MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES HOPE FOR HOMEOWNERS PROGRAM HOPE for Homeowners Program-General Requirements § 257.1 Purpose of program. The HOPE for...

EpHLA: an innovative and user-friendly software automating the HLAMatchmaker algorithm for antibody analysis.

PubMed

Sousa, Luiz Cláudio Demes da Mata; Filho, Herton Luiz Alves Sales; Von Glehn, Cristina de Queiroz Carrascosa; da Silva, Adalberto Socorro; Neto, Pedro de Alcântara dos Santos; de Castro, José Adail Fonseca; do Monte, Semíramis Jamil Hadad

2011-12-01

The global challenge for solid organ transplantation programs is to distribute organs to the highly sensitized recipients. The purpose of this work is to describe and test the functionality of the EpHLA software, a program that automates the analysis of acceptable and unacceptable HLA epitopes on the basis of the HLAMatchmaker algorithm. HLAMatchmaker considers small configurations of polymorphic residues referred to as eplets as essential components of HLA-epitopes. Currently, the analyses require the creation of temporary files and the manual cut and paste of laboratory tests results between electronic spreadsheets, which is time-consuming and prone to administrative errors. The EpHLA software was developed in Object Pascal programming language and uses the HLAMatchmaker algorithm to generate histocompatibility reports. The automated generation of reports requires the integration of files containing the results of laboratory tests (HLA typing, anti-HLA antibody signature) and public data banks (NMDP, IMGT). The integration and the access to this data were accomplished by means of the framework called eDAFramework. The eDAFramework was developed in Object Pascal and PHP and it provides data access functionalities for software developed in these languages. The tool functionality was successfully tested in comparison to actual, manually derived reports of patients from a renal transplantation program with related donors. We successfully developed software, which enables the automated definition of the epitope specificities of HLA antibodies. This new tool will benefit the management of recipient/donor pairs selection for highly sensitized patients. Copyright © 2011 Elsevier B.V. All rights reserved.

Extended System Operations Studies for Automated Guideway Transit Systems : Procedure for the Analysis of Representative AGT Deployments

DOT National Transportation Integrated Search

1981-12-01

The purpose of this report is to present a general procedure for using the SOS software to analyze AGT systems. Data to aid the analyst in specifying input information, required as input to the software, are summarized in the appendices. The data are...

34 CFR 303.1 - Purpose of the early intervention program for infants and toddlers with disabilities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false Purpose of the early intervention program for infants... EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS WITH DISABILITIES General Purpose and Applicable Regulations § 303.1 Purpose of the early intervention program for infants and toddlers with...

34 CFR 303.1 - Purpose of the early intervention program for infants and toddlers with disabilities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 2 2013-07-01 2013-07-01 false Purpose of the early intervention program for infants... EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS WITH DISABILITIES General Purpose and Applicable Regulations § 303.1 Purpose of the early intervention program for infants and toddlers with...

34 CFR 303.1 - Purpose of the early intervention program for infants and toddlers with disabilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true Purpose of the early intervention program for infants... EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS WITH DISABILITIES General Purpose and Applicable Regulations § 303.1 Purpose of the early intervention program for infants and toddlers with...

MVRTA Charge-A-Ride Program : Credit Card Fare Post-Payment in Haverhill, MA.

DOT National Transportation Integrated Search

1988-03-01

This report presents an evaluation of a demonstration of automated fare collection using on-board credit card readers and recorders on general revenue service buses in Haverhill, Massachusetts. The demonstration project employed a credit card system ...

Why people download the freeware AIDA v4.3a diabetes software program: a proof-of-concept semi-automated analysis.

PubMed

Lehmann, Eldon D

2003-01-01

AIDA is a diabetes-computing program freely available at www.2aida.org on the Web. The software is intended to serve as an educational support tool and can be used by anyone who has an interest in diabetes, whether they be patients, relatives, health-care professionals, or students. In previous "Diabetes Information Technology & WebWatch" columns various indicators of usage of the AIDA program have been reviewed, and various comments from users of the software have been documented. The purpose of this column is to overview a proof-of-concept semi-automated analysis about why people are downloading the latest version of the AIDA educational diabetes program. AIDA permits the interactive simulation of plasma insulin and blood glucose profiles for teaching, demonstration, self-learning, and research purposes. It has been made freely available, without charge, on the Internet as a noncommercial contribution to continuing diabetes education. Since its launch in 1996 over 300,000 visits have been logged at the main AIDA Website-www.2aida.org-and over 60,000 copies of the AIDA program have been downloaded free-of-charge. This column documents the results of a semi-automated analysis of comments left by Website visitors while they were downloading the AIDA software, before they had a chance to use the program. The Internet-based survey methodology and semi-automated analysis were both found to be robust and reliable. Over a 5-month period (from October 3, 2001 to February 28, 2002) 400 responses were received. During the corresponding period 1,770 actual visits were made to the Website survey page-giving a response rate to this proof-of-concept study of 22.6%. Responses were received from participants in over 54 countries-with nearly half of these (n = 194; 48.5%) originating from the United States, United Kingdom, and Canada; 208 responses (52.0%) were received from patients with diabetes, 50 (12.5%) from doctors, 49 (12.3%) from relatives of patients, with fewer responses from students, diabetes educators, nurses, pharmacists, and other end users. The semi-automated analysis adopted for this study has re-affirmed the feasibility of using the Internet to obtain free-text comments, at no real cost, from a substantial number of medical software downloaders/users. The survey has also offered some insight into why members of the public continue to turn to the Internet for medical information. Furthermore it has provided useful information about why people are actually downloading the AIDA v4.3a interactive educational "virtual diabetes patient" simulator.

From LAMP to Koha: Case Study of the Pakistan Legislative Assembly Libraries

ERIC Educational Resources Information Center

Shafi-Ullah, Farasat; Qutab, Saima

2012-01-01

Purpose: This paper aims to elaborate the library data migration process from LAMP (Library Automation Management Program) to the open source software Koha's (2.2.8 Windows based) Pakistani flavour PakLAG-Koha in six legislative assembly libraries of Pakistan. Design/methodology/approach: The paper explains different steps of the data migration…

Generalized Fluid System Simulation Program (GFSSP) Version 6 - General Purpose Thermo-Fluid Network Analysis Software

NASA Technical Reports Server (NTRS)

Majumdar, Alok; Leclair, Andre; Moore, Ric; Schallhorn, Paul

2011-01-01

GFSSP stands for Generalized Fluid System Simulation Program. It is a general-purpose computer program to compute pressure, temperature and flow distribution in a flow network. GFSSP calculates pressure, temperature, and concentrations at nodes and calculates flow rates through branches. It was primarily developed to analyze Internal Flow Analysis of a Turbopump Transient Flow Analysis of a Propulsion System. GFSSP development started in 1994 with an objective to provide a generalized and easy to use flow analysis tool for thermo-fluid systems.

Opportunities for Automated Demand Response in California Agricultural Irrigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olsen, Daniel; Aghajanzadeh, Arian; McKane, Aimee

Pumping water for agricultural irrigation represents a significant share of California’s annual electricity use and peak demand. It also represents a large source of potential flexibility, as farms possess a form of storage in their wetted soil. By carefully modifying their irrigation schedules, growers can participate in demand response without adverse effects on their crops. This report describes the potential for participation in demand response and automated demand response by agricultural irrigators in California, as well as barriers to widespread participation. The report first describes the magnitude, timing, location, purpose, and manner of energy use in California. Typical on-­farm controlsmore » are discussed, as well as common impediments to participation in demand response and automated demand response programs. Case studies of demand response programs in California and across the country are reviewed, and their results along with overall California demand estimates are used to estimate statewide demand response potential. Finally, recommendations are made for future research that can enhance the understanding of demand response potential in this industry.« less

AN INTERACTIVE INQUIRER.

ERIC Educational Resources Information Center

STONE, PHILIP J.

AUTOMATED LANGUAGE PROCESSING (CONTENT ANALYSIS) IS ENGAGED IN NEW VENTURES IN COMPUTER DIALOG AS A RESULT OF NEW TECHNIQUES IN CATEGORIZING RESPONSES. A COMPUTER "NEED-ACHIEVEMENT" SCORING SYSTEM HAS BEEN DEVELOPED. A SET OF COMPUTER PROGRAMS, LABELED "THE GENERAL INQUIRER," WILL SCORE COMPUTER INPUTS WITH RESPONSES FED FROM…

Automation Applications in an Advanced Air Traffic Management System : Volume 1. Summary.

DOT National Transportation Integrated Search

1974-08-01

The Advanced Air Traffic Management System (AATMS) program is a long-range investigation of new concepts and techniques for controlling air traffic and providing services to the growing number of commercial, military, and general aviation users of th...

7 CFR 3430.601 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

...-GENERAL AWARD ADMINISTRATIVE PROVISIONS Beginning Farmer and Rancher Development Program § 3430.601 Purpose. The purpose of the Beginning Farmer and Rancher Development Program (BFRDP) is to establish a beginning farmer and rancher development program that provides local and regional training, education...

7 CFR 3430.901 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE COMPETITIVE AND NONCOMPETITIVE NON-FORMULA FEDERAL ASSISTANCE PROGRAMS-GENERAL AWARD ADMINISTRATIVE PROVISIONS New Era Rural Technology Competitive Grants Program § 3430.901 Purpose. The purpose of this program is...

Behavioral Scientists (AFSC 2675), Scientific Managers (AFSC 26169), and Related Specialties.

DTIC Science & Technology

1984-12-01

mitroliche only h : hard copy only A ,ceoo For DTI5 ?RA1 . ." ),, " k -. A’t ’ . .. " " ." , ’ - % ° ’ -" .. . , .. -. • . . . -. . . . - " . TABLE OF...FUNCTIONS 22 K APPLICATIONS OF RESEARCH L MANAGING RESEARCH OR APPLICATIONS PROGRAMS 14 M ORGANIZATIONAL IMPROVEMENT FUNCTIONS it N ACADEMIC INSTRUCTOR...time ratings for each task. For the purpose of organizing individual jobs into similar types of work, an automated job clustering program was used. This

Defense Enterprise Accounting and Management System-Increment 1 (DEAMS Inc 1)

DTIC Science & Technology

2016-03-01

information accurately and in conformance with Generally Accepted Accounting Principles , to comply with Congressional requirements of the Chief Financial ...2016 Major Automated Information System Annual Report Defense Enterprise Accounting and Management System-Increment 1 (DEAMS Inc 1) Defense...Phone: 937-257-2714 Fax: DSN Phone: 787-2714 DSN Fax: Date Assigned: August 17, 2015 Program Information Program Name Defense Enterprise Accounting

38 CFR 1.891 - Purpose of program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Purpose of program. 1.891 Section 1.891 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS GENERAL PROVISIONS Part-Time Career Employment Program § 1.891 Purpose of program. Many individuals in society possess...

78 FR 66039 - Modification of National Customs Automation Program Test Concerning Automated Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... Customs Automation Program Test Concerning Automated Commercial Environment (ACE) Cargo Release (Formerly... Simplified Entry functionality in the Automated Commercial Environment (ACE). Originally, the test was known...) test concerning Automated Commercial Environment (ACE) Simplified Entry (SE test) functionality is...

DORMAN computer program (study 2.5). Volume 1: Executive summary. [development of data bank for computerized information storage of NASA programs

NASA Technical Reports Server (NTRS)

Stricker, L. T.

1973-01-01

The DORCA Applications study has been directed at development of a data bank management computer program identified as DORMAN. Because of the size of the DORCA data files and the manipulations required on that data to support analyses with the DORCA program, automated data techniques to replace time-consuming manual input generation are required. The Dynamic Operations Requirements and Cost Analysis (DORCA) program was developed for use by NASA in planning future space programs. Both programs are designed for implementation on the UNIVAC 1108 computing system. The purpose of this Executive Summary Report is to define for the NASA management the basic functions of the DORMAN program and its capabilities.

Guaranteed Student Loan Information System Needs a Thorough Redesign to Account for the Expenditure of Billions. Report by the U.S. General Accounting Office.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

The adequacy of the Department of Education's automated information system for the Guaranteed Student Loan Program was assessed. The review conducted by the U.S. General Accounting Office focused on the department's efforts and plans to correct system deficiencies, the reasonableness and propriety of major system costs incurred, and the…

Factors Affecting the Full Use of Library and Information Management Systems by Library Personnel

ERIC Educational Resources Information Center

Skretas, Georgios

2005-01-01

Purpose: To provide a general list of factors that affects and determines the full use of library information management systems (LIMS) by library staff. Design/methodology/approach: The factors, which were identified mainly during participation in the implementation of automation projects in Greece, are listed and briefly analysed in categories…

25 CFR 26.3 - What is the purpose of the Job Placement and Training Program?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is the purpose of the Job Placement and Training... PLACEMENT AND TRAINING PROGRAM General Applicability § 26.3 What is the purpose of the Job Placement and Training Program? The purpose of the Job Placement and Training Program is to assist eligible applicants to...

24 CFR 4001.01 - Purpose of program.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) BOARD OF DIRECTORS OF THE HOPE FOR HOMEOWNERS PROGRAM HOPE FOR HOMEOWNERS PROGRAM HOPE for Homeowners Program-General Requirements § 4001.01 Purpose of program. The HOPE for Homeowners Program is a temporary... avoid foreclosure. The HOPE for Homeowners Program is administered by HUD through FHA. ...

Experimental research control software system

NASA Astrophysics Data System (ADS)

Cohn, I. A.; Kovalenko, A. G.; Vystavkin, A. N.

2014-05-01

A software system, intended for automation of a small scale research, has been developed. The software allows one to control equipment, acquire and process data by means of simple scripts. The main purpose of that development is to increase experiment automation easiness, thus significantly reducing experimental setup automation efforts. In particular, minimal programming skills are required and supervisors have no reviewing troubles. Interactions between scripts and equipment are managed automatically, thus allowing to run multiple scripts simultaneously. Unlike well-known data acquisition commercial software systems, the control is performed by an imperative scripting language. This approach eases complex control and data acquisition algorithms implementation. A modular interface library performs interaction with external interfaces. While most widely used interfaces are already implemented, a simple framework is developed for fast implementations of new software and hardware interfaces. While the software is in continuous development with new features being implemented, it is already used in our laboratory for automation of a helium-3 cryostat control and data acquisition. The software is open source and distributed under Gnu Public License.

Automating tasks in protein structure determination with the clipper python module

PubMed Central

McNicholas, Stuart; Croll, Tristan; Burnley, Tom; Palmer, Colin M.; Hoh, Soon Wen; Jenkins, Huw T.; Dodson, Eleanor

2017-01-01

Abstract Scripting programming languages provide the fastest means of prototyping complex functionality. Those with a syntax and grammar resembling human language also greatly enhance the maintainability of the produced source code. Furthermore, the combination of a powerful, machine‐independent scripting language with binary libraries tailored for each computer architecture allows programs to break free from the tight boundaries of efficiency traditionally associated with scripts. In the present work, we describe how an efficient C++ crystallographic library such as Clipper can be wrapped, adapted and generalized for use in both crystallographic and electron cryo‐microscopy applications, scripted with the Python language. We shall also place an emphasis on best practices in automation, illustrating how this can be achieved with this new Python module. PMID:28901669

Computer-aided linear-circuit design.

NASA Technical Reports Server (NTRS)

Penfield, P.

1971-01-01

Usually computer-aided design (CAD) refers to programs that analyze circuits conceived by the circuit designer. Among the services such programs should perform are direct network synthesis, analysis, optimization of network parameters, formatting, storage of miscellaneous data, and related calculations. The program should be embedded in a general-purpose conversational language such as BASIC, JOSS, or APL. Such a program is MARTHA, a general-purpose linear-circuit analyzer embedded in APL.

Support services for the automative gas turbine project

NASA Technical Reports Server (NTRS)

Golec, T. (Editor)

1981-01-01

Support was provided to DOE and NASA in their efforts to inform industry, the public, and Government on the benefits and purpose of the gas turbine programs through demonstrations and exhibits. Tasks were carried out for maintenance, repair, and retrofit of the experimental gas turbine engines being used by NASA in their gas turbine technology programs and in program demonstrations. Limited support testing was conducted at Chrysler in which data were generated on air bearing rotor shaft dynamics, heavy duty variable sheave rubber belts, high temperature elastomer regenerator drive mounting and graphite regenerator seal friction characteristics.

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation. Appendix B: ROBSIM programmer's guide

NASA Technical Reports Server (NTRS)

Haley, D. C.; Almand, B. J.; Thomas, M. M.; Krauze, L. D.; Gremban, K. D.; Sanborn, J. C.; Kelly, J. H.; Depkovich, T. M.; Wolfe, W. J.; Nguyen, T.

1986-01-01

The purpose of the Robotic Simulation (ROBSIM) program is to provide a broad range of computer capabilities to assist in the design, verification, simulation, and study of robotic systems. ROBSIM is programmed in FORTRAM 77 and implemented on a VAX 11/750 computer using the VMS operating system. The programmer's guide describes the ROBSIM implementation and program logic flow, and the functions and structures of the different subroutines. With the manual and the in-code documentation, an experienced programmer can incorporate additional routines and modify existing ones to add desired capabilities.

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation, appendix B

NASA Technical Reports Server (NTRS)

Haley, D. C.; Almand, B. J.; Thomas, M. M.; Krauze, L. D.; Gremban, K. D.; Sanborn, J. C.; Kelly, J. H.; Depkovich, T. M.

1984-01-01

The purpose of the Robotics Simulation (ROBSIM) program is to provide a broad range of computer capabilities to assist in the design, verification, simulation, and study of robotic systems. ROBSIM is programmed in FORTRAN 77 and implemented on a VAX 11/750 computer using the VMS operating system. This programmer's guide describes the ROBSIM implementation and program logic flow, and the functions and structures of the different subroutines. With this manual and the in-code documentation, and experienced programmer can incorporate additional routines and modify existing ones to add desired capabilities.

Open-Source Assisted Laboratory Automation through Graphical User Interfaces and 3D Printers: Application to Equipment Hyphenation for Higher-Order Data Generation.

PubMed

Siano, Gabriel G; Montemurro, Milagros; Alcaráz, Mirta R; Goicoechea, Héctor C

2017-10-17

Higher-order data generation implies some automation challenges, which are mainly related to the hidden programming languages and electronic details of the equipment. When techniques and/or equipment hyphenation are the key to obtaining higher-order data, the required simultaneous control of them demands funds for new hardware, software, and licenses, in addition to very skilled operators. In this work, we present Design of Inputs-Outputs with Sikuli (DIOS), a free and open-source code program that provides a general framework for the design of automated experimental procedures without prior knowledge of programming or electronics. Basically, instruments and devices are considered as nodes in a network, and every node is associated both with physical and virtual inputs and outputs. Virtual components, such as graphical user interfaces (GUIs) of equipment, are handled by means of image recognition tools provided by Sikuli scripting language, while handling of their physical counterparts is achieved using an adapted open-source three-dimensional (3D) printer. Two previously reported experiments of our research group, related to fluorescence matrices derived from kinetics and high-performance liquid chromatography, were adapted to be carried out in a more automated fashion. Satisfactory results, in terms of analytical performance, were obtained. Similarly, advantages derived from open-source tools assistance could be appreciated, mainly in terms of lesser intervention of operators and cost savings.

Description of the IV + V System Software Package.

ERIC Educational Resources Information Center

Microcomputers for Information Management: An International Journal for Library and Information Services, 1984

1984-01-01

Describes the IV + V System, a software package designed by the Institut fur Maschinelle Dokumentation for the United Nations General Information Programme and UNISIST to support automation of local information and documentation services. Principle program features and functions outlined include input/output, databank, text image, output, and…

76 FR 34246 - Automated Commercial Environment (ACE); Announcement of National Customs Automation Program Test...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-13

... CBP with authority to conduct limited test programs or procedures designed to evaluate planned... aspects of this test, including the design, conduct and implementation of the test, in order to determine... Environment (ACE); Announcement of National Customs Automation Program Test of Automated Procedures for In...

Operations analysis (study 2.1). Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Wolfe, R. R.

1975-01-01

Subjects related to future STS operations concepts were investigated. The majority of effort was directed at assessing the benefits of automated space servicing concepts as related to improvements in payload procurement and shuttle utilization. Another subject was directed at understanding shuttle upper stage software development and recurring costs relative to total program projections. Space serving of automated payloads is addressed by examining the broad spectrum of payload applications with the belief that shared logistic operations will be a major contributor to reduction of future program costs. However, there are certain requirements for support of payload operations, such as availability of the payload, that may place demands upon the shuttle fleet. Because future projections of the NASA Mission Model are only representative of the payload traffic, it is important to recognize that it is the general character of operations that is significant rather than service to any single payload program.

System for Computer Automated Typesetting ((SCAT) of Computer Authored Texts.

DTIC Science & Technology

1980-07-01

95 APPENDIX D - CODE SETS. .. .. .... ...... ..... ....... 101 APPENDIX E - SAMPLE OF PROGRAMMED INSTRUCTION DEMONSTRATING THE USE OF TYPOGRAPHY ...demonstrates the quality of typography available. 1discussion of typesetting in general is beyond the scope of this report. The reader not familiar with...INSTRUCTION DEMONSTRATING THE USE OF TYPOGRAPHY 107 1’p TAEG Report No. 8 PRESENT WEATHER SYMBOLS Symbolic Numbers NWS-AG-A-090 November 1979 This program was

Evaluation of Safety Programs with Respect to the Causes of General Aviation Accidents. Volume I. Technical Report,

DTIC Science & Technology

1980-05-01

65 Physical Impairment 66 Spatial disorientation. 67 Psychological condition. 71 Misused or failed to use flaps. 74 Left aircraft unattended, engine...ARTS III - (Software) (1975) 203 Weather Radar Display System (ASR - 57) 204 ATARS - Automated Terminal Area Radar Service (1974) 205 Instrument Landing...Generated Trauma, Pathological and Psychological Dysfunction accident causes. Collectively, the distribution of safety programs throughout the fault

SU-G-BRB-04: Automated Output Factor Measurements Using Continuous Data Logging for Linac Commissioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, X; Li, S; Zheng, D

Purpose: Linac commissioning is a time consuming and labor intensive process, the streamline of which is highly desirable. In particular, manual measurement of output factors for a variety of field sizes and energy greatly hinders the commissioning efficiency. In this study, automated measurement of output factors was demonstrated as ‘one-click’ using data logging of an electrometer. Methods: Beams to be measured were created in the recording and verifying (R&V) system and configured for continuous delivery. An electrometer with an automatic data logging feature enabled continuous data collection for all fields without human intervention. The electrometer saved data into a spreadsheetmore » every 0.5 seconds. A Matlab program was developed to analyze the excel data to monitor and check the data quality. Results: For each photon energy, output factors were measured for five configurations, including open field and four wedges. Each configuration includes 72 fields sizes, ranging from 4×4 to 20×30 cm{sup 2}. Using automation, it took 50 minutes to complete the measurement of 72 field sizes, in contrast to 80 minutes when using the manual approach. The automation avoided the necessity of redundant Linac status checks between fields as in the manual approach. In fact, the only limiting factor in such automation is Linac overheating. The data collection beams in the R&V system are reusable, and the simplified process is less error-prone. In addition, our Matlab program extracted the output factors faithfully from data logging, and the discrepancy between the automatic and manual measurement is within ±0.3%. For two separate automated measurements 30 days apart, consistency check shows a discrepancy within ±1% for 6MV photon with a 60 degree wedge. Conclusion: Automated output factor measurements can save time by 40% when compared with conventional manual approach. This work laid ground for further improvement for the automation of Linac commissioning.« less

Automated model integration at source code level: An approach for implementing models into the NASA Land Information System

NASA Astrophysics Data System (ADS)

Wang, S.; Peters-Lidard, C. D.; Mocko, D. M.; Kumar, S.; Nearing, G. S.; Arsenault, K. R.; Geiger, J. V.

2014-12-01

Model integration bridges the data flow between modeling frameworks and models. However, models usually do not fit directly into a particular modeling environment, if not designed for it. An example includes implementing different types of models into the NASA Land Information System (LIS), a software framework for land-surface modeling and data assimilation. Model implementation requires scientific knowledge and software expertise and may take a developer months to learn LIS and model software structure. Debugging and testing of the model implementation is also time-consuming due to not fully understanding LIS or the model. This time spent is costly for research and operational projects. To address this issue, an approach has been developed to automate model integration into LIS. With this in mind, a general model interface was designed to retrieve forcing inputs, parameters, and state variables needed by the model and to provide as state variables and outputs to LIS. Every model can be wrapped to comply with the interface, usually with a FORTRAN 90 subroutine. Development efforts need only knowledge of the model and basic programming skills. With such wrappers, the logic is the same for implementing all models. Code templates defined for this general model interface could be re-used with any specific model. Therefore, the model implementation can be done automatically. An automated model implementation toolkit was developed with Microsoft Excel and its built-in VBA language. It allows model specifications in three worksheets and contains FORTRAN 90 code templates in VBA programs. According to the model specification, the toolkit generates data structures and procedures within FORTRAN modules and subroutines, which transfer data between LIS and the model wrapper. Model implementation is standardized, and about 80 - 90% of the development load is reduced. In this presentation, the automated model implementation approach is described along with LIS programming interfaces, the general model interface and five case studies, including a regression model, Noah-MP, FASST, SAC-HTET/SNOW-17, and FLake. These different models vary in complexity with software structure. Also, we will describe how these complexities were overcome through using this approach and results of model benchmarks within LIS.

77 FR 48527 - National Customs Automation Program (NCAP) Test Concerning Automated Commercial Environment (ACE...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... Program (NCAP) Test Concerning Automated Commercial Environment (ACE) Simplified Entry: Modification of... Automated Commercial Environment (ACE). The test's participant selection criteria are modified to reflect... (NCAP) test concerning Automated Commercial Environment (ACE) Simplified Entry functionality (Simplified...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sherman, S.J.

The scope of this document is to define a test plan for the testing of the ASEA 60/2 industrial robot at the Bardons and Oliver (B and O) cut-off lathe in Plant 6. This test plan describes the administrative procedures to be used and the general responsibilities of the Westinghouse Materials Company of Ohio (WMCO) organizations which are most involved in the preparation, coordination, and conduct of the installation, startup, and testing. Any deviations to this procedure will be approved by the test coordinator, Manager, Development, and Plant 6 Supervisor. The purpose of this test is to evaluate the ASEAmore » 60/2 industrial robot to determine the feasibility of implementing a robot at the Bardons and Oliver cut-off lathe in Plant 6 for material handling purposes. This robot will be used as a developmental robot in that it will be installed temporarily at the B and O and then be relocated to another application. The robot will be used for training purposes to familiarize personnel with programming, computer usage, maintenance, and operation of the robot. Radiation exposure reduction of the machine tool operators in Plant 6 will also be determined. Success of the testing will be measured by the amount of radiation exposure reduction and determining the complexity of incorporating automated machinery with the B and O cut-off lathe utilizing a robot.« less

20 CFR 638.100 - General.

Code of Federal Regulations, 2010 CFR

2010-04-01

...' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Purpose and Scope § 638.100 General. (a) Purpose and scope. The... Job Corps program, authorized under title IV-B of the Job Training Partnership Act (Act). Job Corps is...

34 CFR 200.25 - Schoolwide programs in general.

Code of Federal Regulations, 2012 CFR

2012-07-01

... EDUCATION, DEPARTMENT OF EDUCATION TITLE I-IMPROVING THE ACADEMIC ACHIEVEMENT OF THE DISADVANTAGED Improving... in general. (a) Purpose. (1) The purpose of a schoolwide program is to improve academic achievement... related to the State's academic standards under § 200.1. (2) The improved achievement is to result from...

75 FR 28252 - Notice of a Computer Matching Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... GENERAL SERVICES ADMINISTRATION Notice of a Computer Matching Program AGENCY: General Services... providing notice of a proposed computer match. The purpose of this match is to identify individuals who are... providing notice of a proposed computer match. The purpose of this match is to identify individuals who are...

34 CFR 400.1 - What is the purpose of the Vocational and Applied Technology Education Programs?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Technology Education Programs? 400.1 Section 400.1 Education Regulations of the Offices of the Department of... APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.1 What is the purpose of the Vocational and Applied Technology Education Programs? (a) The purpose of the Vocational and Applied Technology Education...

Student Characteristics as Compared to the Community Profile, Fall, 1986. Volume XVI, No. 8.

ERIC Educational Resources Information Center

Flaherty, Toni

In fall 1986, a study was conducted at Illinois' William Rainey Harper College (WRHC) to provide a student profile for general information purposes, to gather data not available on the college's automated student data file, and to analyze WRHC's market outreach. Surveys were mailed to random samples of 500 credit degree students and 300 continuing…

Student Characteristics as Compared to the Community Profile, Fall, 1985. [Research Report Series], Volume XV, No. 11.

ERIC Educational Resources Information Center

Lucas, John A.

In fall 1985, a study was conducted at William Rainey Harper College (WRHC) to provide a student profile for general information purposes, to gather data not available on the college's automated data file, and to analyze WRHC's marketing outreach. Surveys were mailed to random samples of 500 credit degree students and 300 continuing education…

The state agency experience (evaluation/selection of hardware for automated, geo-based information systems)

NASA Technical Reports Server (NTRS)

Campbell, L. F., Jr.

1981-01-01

The purpose and format of a panel session that addressed the procedures by which the hardware components of geographic information systems are evaluated and selected are described. State agencies from Alaska, Colorado, Montana, and Washington were represented and the topic was discussed within the general context of information requirements in land management decision making.

Fully automated calculation of cardiothoracic ratio in digital chest radiographs

NASA Astrophysics Data System (ADS)

Cong, Lin; Jiang, Luan; Chen, Gang; Li, Qiang

2017-03-01

The calculation of Cardiothoracic Ratio (CTR) in digital chest radiographs would be useful for cardiac anomaly assessment and heart enlargement related disease indication. The purpose of this study was to develop and evaluate a fully automated scheme for calculation of CTR in digital chest radiographs. Our automated method consisted of three steps, i.e., lung region localization, lung segmentation, and CTR calculation. We manually annotated the lung boundary with 84 points in 100 digital chest radiographs, and calculated an average lung model for the subsequent work. Firstly, in order to localize the lung region, generalized Hough transform was employed to identify the upper, lower, and outer boundaries of lung by use of Sobel gradient information. The average lung model was aligned to the localized lung region to obtain the initial lung outline. Secondly, we separately applied dynamic programming method to detect the upper, lower, outer and inner boundaries of lungs, and then linked the four boundaries to segment the lungs. Based on the identified outer boundaries of left lung and right lung, we corrected the center and the declination of the original radiography. Finally, CTR was calculated as a ratio of the transverse diameter of the heart to the internal diameter of the chest, based on the segmented lungs. The preliminary results on 106 digital chest radiographs showed that the proposed method could obtain accurate segmentation of lung based on subjective observation, and achieved sensitivity of 88.9% (40 of 45 abnormalities), and specificity of 100% (i.e. 61 of 61 normal) for the identification of heart enlargements.

General purpose simulation system of the data management system for Space Shuttle mission 18

NASA Technical Reports Server (NTRS)

Bengtson, N. M.; Mellichamp, J. M.; Smith, O. C.

1976-01-01

A simulation program for the flow of data through the Data Management System of Spacelab and Space Shuttle was presented. The science, engineering, command and guidance, navigation and control data were included. The programming language used was General Purpose Simulation System V (OS). The science and engineering data flow was modeled from its origin at the experiments and subsystems to transmission from Space Shuttle. Command data flow was modeled from the point of reception onboard and from the CDMS Control Panel to the experiments and subsystems. The GN&C data flow model handled data between the General Purpose Computer and the experiments and subsystems. Mission 18 was the particular flight chosen for simulation. The general structure of the program is presented, followed by a user's manual. Input data required to make runs are discussed followed by identification of the output statistics. The appendices contain a detailed model configuration, program listing and results.

7 CFR 1783.1 - What is the purpose of the Revolving Fund Program?

Code of Federal Regulations, 2010 CFR

2010-01-01

... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) REVOLVING FUNDS FOR FINANCING WATER AND WASTEWATER PROJECTS (REVOLVING FUND PROGRAM) General § 1783.1 What is the purpose of the Revolving Fund Program? This... to capitalize revolving funds for the purpose of providing financing to eligible entities for pre...

24 CFR 982.1 - Programs: purpose and structure.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Programs: purpose and structure. 982.1 Section 982.1 Housing and Urban Development Regulations Relating to Housing and Urban... § 982.1 Programs: purpose and structure. (a) General description. (1) In the HUD Housing Choice Voucher...

78 FR 77427 - Proposed Information Collection; Comment Request; Building for Environmental and Economic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-23

... Commerce, as part of its continuing effort to reduce paperwork and respondent burden, invites the general... of Standards and Technology (NIST) has developed and automated an approach for measuring the life... program to collect data from product manufacturers so that the environmental performance of their products...

An Evaluation of an Automated Approach to Concept-Based Grammar Instruction

ERIC Educational Resources Information Center

Lyddon, Paul A.

2012-01-01

Acquiring sufficient linguistic proficiency to perform competently in academic and professional contexts generally requires substantial study time beyond what most language programs can offer in the classroom. As such, teachers and students alike would benefit considerably from high quality self-access materials promoting independent learning out…

Data Processing for High School Students

ERIC Educational Resources Information Center

Spiegelberg, Emma Jo

1974-01-01

Data processing should be taught at the high school level so students may develop a general understanding and appreciation for the capabilities and the limitations of these automated data processing systems. Card machines, wiring, logic, flowcharting, and Cobol programing are to be taught, with behavioral objectives for each section listed. (SC)

Web Navigation Sequences Automation in Modern Websites

NASA Astrophysics Data System (ADS)

Montoto, Paula; Pan, Alberto; Raposo, Juan; Bellas, Fernando; López, Javier

Most today’s web sources are designed to be used by humans, but they do not provide suitable interfaces for software programs. That is why a growing interest has arisen in so-called web automation applications that are widely used for different purposes such as B2B integration, automated testing of web applications or technology and business watch. Previous proposals assume models for generating and reproducing navigation sequences that are not able to correctly deal with new websites using technologies such as AJAX: on one hand existing systems only allow recording simple navigation actions and, on the other hand, they are unable to detect the end of the effects caused by an user action. In this paper, we propose a set of new techniques to record and execute web navigation sequences able to deal with all the complexity existing in AJAX-based web sites. We also present an exhaustive evaluation of the proposed techniques that shows very promising results.

7 CFR 3430.501 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Regulations of the Department of Agriculture (Continued) NATIONAL INSTITUTE OF FOOD AND AGRICULTURE COMPETITIVE AND NONCOMPETITIVE NON-FORMULA FEDERAL ASSISTANCE PROGRAMS-GENERAL AWARD ADMINISTRATIVE PROVISIONS Integrated Research, Education, and Extension Competitive Grants Program § 3430.501 Purpose. The purpose of...

Pilot factors guidelines for the operational inspection of navigation systems

NASA Technical Reports Server (NTRS)

Sadler, J. F.; Boucek, G. P.

1988-01-01

A computerized human engineered inspection technique is developed for use by FAA inspectors in evaluating the pilot factors aspects of aircraft navigation systems. The short title for this project is Nav Handbook. A menu-driven checklist, computer program and data base (Human Factors Design Criteria) were developed and merged to form a self-contained, portable, human factors inspection checklist tool for use in a laboratory or field setting. The automated checklist is tailored for general aviation navigation systems and can be expanded for use with other aircraft systems, transports or military aircraft. The Nav Handbook inspection concept was demonstrated using a lap-top computer and an Omega/VLF CDU. The program generates standardized inspection reports. Automated checklists for LORAN/C and R NAV were also developed. A Nav Handbook User's Guide is included.

Environmental effects of dredging. Documentation of the efqual module for ADDAMS: Comparison of predicted effluent water quality with standards. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palermo, M.R.; Schroeder, P.R.

This technical note describes a technique for comparison of the predicted quality of effluent discharged from confined dredged material disposal areas with applicable water quality standards. This note also serves as documentation of a computer program called EFQUAL written for that purpose as part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

Best Management Practices (BMP) Monitoring Manual Field Guide: Implementation and Effectiveness for Protection of Water Resources

Treesearch

David Welsch; Roger Ryder; Tim Post

2006-01-01

The specific purpose of the BMP protocol is to create an economical, standardized, and repeatable BMP monitoring process that is completely automated, from data gathering through report generation, in order to provide measured data, ease of use, and compatibility with State BMP programs.The protocol was developed to meet the following needs:? Document the use and...

SU-C-9A-02: Structured Noise Index as An Automated Quality Control for Nuclear Medicine: A Two Year Experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, J; Christianson, O; Samei, E

Purpose: Flood-field uniformity evaluation is an essential element in the assessment of nuclear medicine (NM) gamma cameras. It serves as the central element of the quality control (QC) program, acquired and analyzed on a daily basis prior to clinical imaging. Uniformity images are traditionally analyzed using pixel value-based metrics which often fail to capture subtle structure and patterns caused by changes in gamma camera performance requiring additional visual inspection which is subjective and time demanding. The goal of this project was to develop and implement a robust QC metrology for NM that is effective in identifying non-uniformity issues, reporting issuesmore » in a timely manner for efficient correction prior to clinical involvement, all incorporated into an automated effortless workflow, and to characterize the program over a two year period. Methods: A new quantitative uniformity analysis metric was developed based on 2D noise power spectrum metrology and confirmed based on expert observer visual analysis. The metric, termed Structured Noise Index (SNI) was then integrated into an automated program to analyze, archive, and report on daily NM QC uniformity images. The effectiveness of the program was evaluated over a period of 2 years. Results: The SNI metric successfully identified visually apparent non-uniformities overlooked by the pixel valuebased analysis methods. Implementation of the program has resulted in nonuniformity identification in about 12% of daily flood images. In addition, due to the vigilance of staff response, the percentage of days exceeding trigger value shows a decline over time. Conclusion: The SNI provides a robust quantification of the NM performance of gamma camera uniformity. It operates seamlessly across a fleet of multiple camera models. The automated process provides effective workflow within the NM spectra between physicist, technologist, and clinical engineer. The reliability of this process has made it the preferred platform for NM uniformity analysis.« less

Development of concepts for satellite retrieval devices

NASA Technical Reports Server (NTRS)

Pruett, E. C.; Robertson, K. B., III; Loughead, T. E.

1979-01-01

The teleoperator being developed to augment the Space Transportation System (STS) for satellite placement, retrieval, or servicing at altitudes or orbital planes where it would be impractical to use the shuttle is primarily a general purpose propulsion stage that can be fitted with manipulator arms, automated servicers and satellite retrieval devices for particular missions. Design concepts for a general purpose retrieval device for docking with a satellite to which a grappling fixture has been attached, and for a retrieval device for docking with the Solar Maximum Mission (SMM) spacecraft were defined. The mechanical aspects of these two devices are discussed as well as the crew operations involved and problems created by the requirement for remote control. Drawings for the two retrieval device concepts are included.

Selection and Use of General-Purpose Programming Languages--Overview. Volume 1.

ERIC Educational Resources Information Center

Cugini, John V.

This study presents a review of selection factors for the seven major general-purpose programming languages: Ada, BASIC, C, COBOL, FORTRAN, PASCAL, and PL/I. The factors covered include not only the logical operations within each language, but also the advantages and disadvantages stemming from the current computing environment, e.g., software…

40 CFR 501.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Purpose and scope. 501.1 Section 501.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.1 Purpose and scope. (a) These...

40 CFR 501.1 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Purpose and scope. 501.1 Section 501.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.1 Purpose and scope. (a) These...

40 CFR 501.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Purpose and scope. 501.1 Section 501.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.1 Purpose and scope. (a) These...

40 CFR 501.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Purpose and scope. 501.1 Section 501.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.1 Purpose and scope. (a) These...

40 CFR 501.1 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Purpose and scope. 501.1 Section 501.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Purpose, Scope and General Program Requirements § 501.1 Purpose and scope. (a) These...

34 CFR 361.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SERVICES, DEPARTMENT OF EDUCATION STATE VOCATIONAL REHABILITATION SERVICES PROGRAM General § 361.1 Purpose. Under the State Vocational Rehabilitation Services Program (Program), the Secretary provides grants to...) Designed to assess, plan, develop, and provide vocational rehabilitation services for individuals with...

Construction of a General Purpose Command Language for Use in Computer Dialog.

DTIC Science & Technology

1980-09-01

Page 1 Skeletal Command Action File...............35 2 Sample from Cyber Action File.................36 3 Program MONITOR Structure Chart...return indicates subroutine call and no return Fig 3. Program MONITOR Structure Chart 48 IV. Validation The general purpose command language was...executive control of these functions, in C addition to its role as interpreter. C C The structure , concept, design, and implementation of program C

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 4: HARP Output (HARPO) graphics display user's guide

NASA Technical Reports Server (NTRS)

Sproles, Darrell W.; Bavuso, Salvatore J.

1994-01-01

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical postprocessor program HARPO (HARP Output). HARPO reads ASCII files generated by HARP. It provides an interactive plotting capability that can be used to display alternate model data for trade-off analyses. File data can also be imported to other commercial software programs.

Automated procedure for developing hybrid computer simulations of turbofan engines. Part 1: General description

NASA Technical Reports Server (NTRS)

Szuch, J. R.; Krosel, S. M.; Bruton, W. M.

1982-01-01

A systematic, computer-aided, self-documenting methodology for developing hybrid computer simulations of turbofan engines is presented. The methodology that is pesented makes use of a host program that can run on a large digital computer and a machine-dependent target (hybrid) program. The host program performs all the calculations and data manipulations that are needed to transform user-supplied engine design information to a form suitable for the hybrid computer. The host program also trims the self-contained engine model to match specified design-point information. Part I contains a general discussion of the methodology, describes a test case, and presents comparisons between hybrid simulation and specified engine performance data. Part II, a companion document, contains documentation, in the form of computer printouts, for the test case.

7 CFR 634.1 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AGRICULTURE LONG TERM CONTRACTING RURAL CLEAN WATER PROGRAM General § 634.1 Purpose and scope. (a) The purpose.... Environmental Protection Agency (EPA), to set forth regulations to carry out a Rural Clean Water Program (RCWP) under section 35, Pub. L. 95-217; 91 Stat. 1579; 33 U.S.C. 1288. (b) The Rural Clean Water Program...

7 CFR 634.1 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AGRICULTURE LONG TERM CONTRACTING RURAL CLEAN WATER PROGRAM General § 634.1 Purpose and scope. (a) The purpose.... Environmental Protection Agency (EPA), to set forth regulations to carry out a Rural Clean Water Program (RCWP) under section 35, Pub. L. 95-217; 91 Stat. 1579; 33 U.S.C. 1288. (b) The Rural Clean Water Program...

7 CFR 634.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGRICULTURE LONG TERM CONTRACTING RURAL CLEAN WATER PROGRAM General § 634.1 Purpose and scope. (a) The purpose.... Environmental Protection Agency (EPA), to set forth regulations to carry out a Rural Clean Water Program (RCWP) under section 35, Pub. L. 95-217; 91 Stat. 1579; 33 U.S.C. 1288. (b) The Rural Clean Water Program...

7 CFR 2903.2 - Purpose of the program.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., DEPARTMENT OF AGRICULTURE BIODIESEL FUEL EDUCATION PROGRAM General Information § 2903.2 Purpose of the program. The Biodiesel Fuel Education Program seeks to familiarize public and private vehicle fleet operators, other interested entities, and the public, with the benefits of biodiesel, a relatively new fuel...

7 CFR 2903.2 - Purpose of the program.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF AGRICULTURE BIODIESEL FUEL EDUCATION PROGRAM General Information § 2903.2 Purpose of the program. The Biodiesel Fuel Education Program seeks to familiarize public and private vehicle fleet operators, other interested entities, and the public, with the benefits of biodiesel, a relatively new fuel...

7 CFR 2903.2 - Purpose of the program.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF AGRICULTURE BIODIESEL FUEL EDUCATION PROGRAM General Information § 2903.2 Purpose of the program. The Biodiesel Fuel Education Program seeks to familiarize public and private vehicle fleet operators, other interested entities, and the public, with the benefits of biodiesel, a relatively new fuel...

7 CFR 2903.2 - Purpose of the program.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF AGRICULTURE BIODIESEL FUEL EDUCATION PROGRAM General Information § 2903.2 Purpose of the program. The Biodiesel Fuel Education Program seeks to familiarize public and private vehicle fleet operators, other interested entities, and the public, with the benefits of biodiesel, a relatively new fuel...

7 CFR 2903.2 - Purpose of the program.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE BIODIESEL FUEL EDUCATION PROGRAM General Information § 2903.2 Purpose of the program. The Biodiesel Fuel Education Program seeks to familiarize public and private vehicle fleet operators, other interested entities, and the public, with the benefits of biodiesel, a relatively new fuel...

A novel web informatics approach for automated surveillance of cancer mortality trends✩

PubMed Central

Tourassi, Georgia; Yoon, Hong-Jun; Xu, Songhua

2016-01-01

Cancer surveillance data are collected every year in the United States via the National Program of Cancer Registries (NPCR) and the Surveillance, Epidemiology and End Results (SEER) Program of the National Cancer Institute (NCI). General trends are closely monitored to measure the nation's progress against cancer. The objective of this study was to apply a novel web informatics approach for enabling fully automated monitoring of cancer mortality trends. The approach involves automated collection and text mining of online obituaries to derive the age distribution, geospatial, and temporal trends of cancer deaths in the US. Using breast and lung cancer as examples, we mined 23,850 cancer-related and 413,024 general online obituaries spanning the timeframe 2008–2012. There was high correlation between the web-derived mortality trends and the official surveillance statistics reported by NCI with respect to the age distribution (ρ = 0.981 for breast; ρ = 0.994 for lung), the geospatial distribution (ρ = 0.939 for breast; ρ = 0.881 for lung), and the annual rates of cancer deaths (ρ = 0.661 for breast; ρ = 0.839 for lung). Additional experiments investigated the effect of sample size on the consistency of the web-based findings. Overall, our study findings support web informatics as a promising, cost-effective way to dynamically monitor spatiotemporal cancer mortality trends. PMID:27044930

A novel web informatics approach for automated surveillance of cancer mortality trends

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tourassi, Georgia; Yoon, Hong -Jun; Xu, Songhua

Cancer surveillance data are collected every year in the United States via the National Program of Cancer Registries (NPCR) and the Surveillance, Epidemiology and End Results (SEER) Program of the National Cancer Institute (NCI). General trends are closely monitored to measure the nation’s progress against cancer. The objective of this study was to apply a novel web informatics approach for enabling fully automated monitoring of cancer mortality trends. The approach involves automated collection and text mining of online obituaries to derive the age distribution, geospatial, and temporal trends of cancer deaths in the US. Using breast and lung cancer asmore » examples, we mined 23,850 cancer-related and 413,024 general online obituaries spanning the timeframe 2008–2012. There was high correlation between the web-derived mortality trends and the official surveillance statistics reported by NCI with respect to the age distribution (ρ = 0.981 for breast; ρ = 0.994 for lung), the geospatial distribution (ρ = 0.939 for breast; ρ = 0.881 for lung), and the annual rates of cancer deaths (ρ = 0.661 for breast; ρ = 0.839 for lung). Additional experiments investigated the effect of sample size on the consistency of the web-based findings. Altogether, our study findings support web informatics as a promising, cost-effective way to dynamically monitor spatiotemporal cancer mortality trends.« less

A novel web informatics approach for automated surveillance of cancer mortality trends

DOE PAGES

Tourassi, Georgia; Yoon, Hong -Jun; Xu, Songhua

2016-04-01

Cancer surveillance data are collected every year in the United States via the National Program of Cancer Registries (NPCR) and the Surveillance, Epidemiology and End Results (SEER) Program of the National Cancer Institute (NCI). General trends are closely monitored to measure the nation’s progress against cancer. The objective of this study was to apply a novel web informatics approach for enabling fully automated monitoring of cancer mortality trends. The approach involves automated collection and text mining of online obituaries to derive the age distribution, geospatial, and temporal trends of cancer deaths in the US. Using breast and lung cancer asmore » examples, we mined 23,850 cancer-related and 413,024 general online obituaries spanning the timeframe 2008–2012. There was high correlation between the web-derived mortality trends and the official surveillance statistics reported by NCI with respect to the age distribution (ρ = 0.981 for breast; ρ = 0.994 for lung), the geospatial distribution (ρ = 0.939 for breast; ρ = 0.881 for lung), and the annual rates of cancer deaths (ρ = 0.661 for breast; ρ = 0.839 for lung). Additional experiments investigated the effect of sample size on the consistency of the web-based findings. Altogether, our study findings support web informatics as a promising, cost-effective way to dynamically monitor spatiotemporal cancer mortality trends.« less

Java PathFinder User Guide

NASA Technical Reports Server (NTRS)

Havelund, Klaus

1999-01-01

The JAVA PATHFINDER, JPF, is a translator from a subset of JAVA 1.0 to PROMELA, the programming language of the SPIN model checker. The purpose of JPF is to establish a framework for verification and debugging of JAVA programming based on model checking. The main goal is to automate program verification such that a programmer can apply it in the daily work without the need for a specialist to manually reformulate a program into a different notation in order to analyze the program. The system is especially suited for analyzing multi-threaded JAVA applications, where normal testing usually falls short. The system can find deadlocks and violations of boolean assertions stated by the programmer in a special assertion language. This document explains how to Use JPF.

Automation in the Teaching of Descriptive Geometry and CAD. High-Level CAD Templates Using Script Languages

NASA Astrophysics Data System (ADS)

Moreno, R.; Bazán, A. M.

2017-10-01

The main purpose of this work is to study improvements to the learning method of technical drawing and descriptive geometry through exercises with traditional techniques that are usually solved manually by applying automated processes assisted by high-level CAD templates (HLCts). Given that an exercise with traditional procedures can be solved, detailed step by step in technical drawing and descriptive geometry manuals, CAD applications allow us to do the same and generalize it later, incorporating references. Traditional teachings have become obsolete and current curricula have been relegated. However, they can be applied in certain automation processes. The use of geometric references (using variables in script languages) and their incorporation into HLCts allows the automation of drawing processes. Instead of repeatedly creating similar exercises or modifying data in the same exercises, users should be able to use HLCts to generate future modifications of these exercises. This paper introduces the automation process when generating exercises based on CAD script files, aided by parametric geometry calculation tools. The proposed method allows us to design new exercises without user intervention. The integration of CAD, mathematics, and descriptive geometry facilitates their joint learning. Automation in the generation of exercises not only saves time but also increases the quality of the statements and reduces the possibility of human error.

Posthole Broadband Sensor Emplacement vs. Surface Vaults: Observations of Comparative Noise Performance and Trade-offs

NASA Astrophysics Data System (ADS)

Sweet, J. R.; Beaudoin, B. C.; Barstow, N.; Pfeifer, M.; Anderson, K. R.; Frassetto, A.

2015-12-01

Advances in seismometer design have diversified the range of instruments available for use in temporary field installations. IRIS programs, primarily PASSCAL and the Transportable Array (TA), have helped steer development of these new instruments to meet these evolving needs. PASSCAL operates a small pool of posthole broadband sensors, purpose built for direct burial. Near surface posthole installations are a new, cost effective, and logistically simple technique for broadband emplacement that is an alternative to the vault installations used in portable broadband seismic experiments for nearly 30 years. Direct burial installation is limited to the time and effort required to dig the borehole and emplace the sensor, thus reducing both material costs and time to install. Also, in Alaska, extreme environments and difficult logistics make standard TA tank vaults inappropriate for most sites. TA has developed improved deployment strategies for these environments. There, holes for posthole sensors are hammer- drilled or augered to several meters depth in soil, permafrost, or bedrock and then cased. These emplacement costs are generally less than standard TA vaults. We compare various installation techniques for test cases as well as general deployments of PASSCAL and TA stations. Automated noise performance analyses have been part of the TA throughout its operation, but until recently vault performance for portable installations supported by the PASSCAL program was sparse. In this study, we select a suite of co-located direct burial and surface vault installations and compare their noise performance using probability density functions. Our initial analyses suggest that direct burial sensors have lower noise levels than vault installations on both horizontal and vertical channels across a range of periods spanning <1 s to 100 s. However, most of these initial experiments for PASSCAL were with sensors not purpose built for direct burial and it became obvious that a sensor designed for direct burial was necessary. For the TA, direct emplacement of purpose-built sensors has routinely improved noise levels, particularly beyond about 20 s, by tens of dB. These results suggest that moving towards an instrument pool composed primarily of purpose-built direct burial sensors could yield higher-quality data at lower cost.

15 CFR 2301.1 - Program purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

....1 Commerce and Foreign Trade Regulations Relating to Telecommunications and Information NATIONAL TELECOMMUNICATIONS AND INFORMATION ADMINISTRATION, DEPARTMENT OF COMMERCE PUBLIC TELECOMMUNICATIONS FACILITIES PROGRAM General § 2301.1 Program purposes. Pursuant to section 390 of the Act, (The Communications Act of...

32 CFR 300.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROGRAM DEFENSE LOGISTICS AGENCY FREEDOM OF INFORMATION ACT PROGRAM General Provisions § 300.1 Purpose. This part provides policies and procedures for the Defense Logistics Agency (DLA) implementation of the...

BULGARIAN COMPATIBILITY WITH NATO AIR POWER

DTIC Science & Technology

2016-02-16

speciality: Aviator-Pilot for the Air Force; Civil speciality: Engineer -Pedagogue in Electronics and Automation with Master degree in Aviation... Engineering . During 2003-2005 Lt. Colonel Rusev was a student in Bulgarian ACSC and graduated as a Master in “Command and Control of Air Force...future belonged to the airship , while French Marshal Foch thought that the aircraft could be used for sporting purposes only.1 Bulgarian generals

AIDA and medical courseware.

PubMed

Sollet, P C; de Mol, E J; van Bemmel, J H

1987-01-01

For more than a decade the Department of Medical Informatics has offered one-week training courses on the subject of computer applications in medicine and health care. Since 1983 two courses are given at a rate of one course every two weeks. One course is on programming and problem solving and consists of three modules of increasing complexity in techniques and methods in programming and structured system development. This course focusses on only some aspects of medical informatics: the development of a medical information system, and the problems occurring in the process of automation. These aspects, however, are dealt with in detail. To this end the students are trained in using the programming system MUMPS and the fourth-generation software package AIDA. The second, introductory course is an intensive training on several distinct areas of man-machine interactions. It contains lessons in the fields of communication and recording; storage and retrieval and databases; computation and automation; recognition and diagnosis; and therapy and control. This paper describes the use of AIDA in developing and maintaining lessons for the latter course, and the assistance of AIDA for teaching purposes in the former course.

An Automated and Programed Laboratory for Instruction in the Areas of Speech and Communication. Final Report.

ERIC Educational Resources Information Center

Coleman, Thomas; Langberg, George

An experimental public school speech therapy program is described, which offers automated, programed instruction in sound production and auditory training. The experiment includes self-teaching methods, as well as utilization of paraprofessional personnel under the supervision of a qualified speech therapist. Although the automated program was…

An Integer Programming-Based Generalized Vehicle Routing Approach for Printed Circuit Board Assembly Optimization

ERIC Educational Resources Information Center

Seth, Anupam

2009-01-01

Production planning and scheduling for printed circuit, board assembly has so far defied standard operations research approaches due to the size and complexity of the underlying problems, resulting in unexploited automation flexibility. In this thesis, the increasingly popular collect-and-place machine configuration is studied and the assembly…

Sigma 2 Graphic Display Software Program Description

NASA Technical Reports Server (NTRS)

Johnson, B. T.

1973-01-01

A general purpose, user oriented graphic support package was implemented. A comprehensive description of the two software components comprising this package is given: Display Librarian and Display Controller. These programs have been implemented in FORTRAN on the XDS Sigma 2 Computer Facility. This facility consists of an XDS Sigma 2 general purpose computer coupled to a Computek Display Terminal.

50 CFR 15.21 - General application procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... PLANTS WILD BIRD CONSERVATION ACT Permits and Approval of Cooperative Breeding Programs § 15.21 General... purposes only: Scientific research; zoological breeding or display programs; cooperative breeding programs...) A person wishing to obtain a permit under this subpart or approval of cooperative breeding programs...

50 CFR 15.21 - General application procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... PLANTS WILD BIRD CONSERVATION ACT Permits and Approval of Cooperative Breeding Programs § 15.21 General... purposes only: Scientific research; zoological breeding or display programs; cooperative breeding programs...) A person wishing to obtain a permit under this subpart or approval of cooperative breeding programs...

40 CFR 610.10 - Program purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accumulation. (b) Data generated in an evaluation program by the Administrator of the Environmental Protection... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY RETROFIT DEVICES Test Procedures and Evaluation Criteria General Provisions § 610.10 Program purpose. (a) The...

34 CFR 350.2 - What is the purpose of the Disability and Rehabilitation Research Project and Centers Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What is the purpose of the Disability and..., DEPARTMENT OF EDUCATION DISABILITY AND REHABILITATION RESEARCH PROJECTS AND CENTERS PROGRAM General § 350.2 What is the purpose of the Disability and Rehabilitation Research Project and Centers Program? The...

7 CFR 1703.100 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... RURAL DEVELOPMENT Distance Learning and Telemedicine Loan and Grant Program-General § 1703.100 Purpose. The purpose of the Distance Learning and Telemedicine (DLT) Loan and Grant Program is to encourage and improve telemedicine services and distance learning services in rural areas through the use of...

7 CFR 1703.100 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... RURAL DEVELOPMENT Distance Learning and Telemedicine Loan and Grant Program-General § 1703.100 Purpose. The purpose of the Distance Learning and Telemedicine (DLT) Loan and Grant Program is to encourage and improve telemedicine services and distance learning services in rural areas through the use of...

7 CFR 1703.100 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... RURAL DEVELOPMENT Distance Learning and Telemedicine Loan and Grant Program-General § 1703.100 Purpose. The purpose of the Distance Learning and Telemedicine (DLT) Loan and Grant Program is to encourage and improve telemedicine services and distance learning services in rural areas through the use of...

7 CFR 1703.100 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... RURAL DEVELOPMENT Distance Learning and Telemedicine Loan and Grant Program-General § 1703.100 Purpose. The purpose of the Distance Learning and Telemedicine (DLT) Loan and Grant Program is to encourage and improve telemedicine services and distance learning services in rural areas through the use of...

Chinese-English Automation and Computer Technology Dictionary, Volume 2.

DTIC Science & Technology

1980-08-01

The purpose of the series is to provide rapid reference tools for translators, abstractors, and research analysts concerned with scientific and...tansuo search; searching; 25 exploration; explore: research ; hunting; trace; seek tansuo dianxian tracer wire 26 884 tansuxd . ., heuristic 01 tansuofa...xunwen -v Ij ;I system interrogation 22 xitong yanjiu A f IC system research 23 xitong yinqyong chengxiud -A, i M 1 R N- #1 , system utility program 24

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Aviation Safety Reporting Program... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against...

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Aviation Safety Reporting Program... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against...

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Aviation Safety Reporting Program... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against...

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Aviation Safety Reporting Program... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against...

AAFE RADSCAT data reduction programs user's guide

NASA Technical Reports Server (NTRS)

Claassen, J. P.

1976-01-01

Theory, design and operation of the computer programs which automate the reduction of joint radiometer and scatterometer observations are presented. The programs reduce scatterometer measurements to the normalized scattering coefficient; whereas the radiometer measurements are converted into antenna temperatures. The programs are both investigator and user oriented. Supplementary parameters are provided to aid in the interpretation of the observations. A hierarchy of diagnostics is available to evaluate the operation of the instrument, the conduct of the experiments and the quality of the records. General descriptions of the programs and their data products are also presented. This document therefore serves as a user's guide to the programs and is therefore intended to serve both the experimenter and the program operator.

DORCA computer program. Volume 1: User's guide

NASA Technical Reports Server (NTRS)

Wray, S. T., Jr.

1971-01-01

The Dynamic Operational Requirements and Cost Analysis Program (DORCA) was written to provide a top level analysis tool for NASA. DORCA relies on a man-machine interaction to optimize results based on external criteria. DORCA relies heavily on outside sources to provide cost information and vehicle performance parameters as the program does not determine these quantities but rather uses them. Given data describing missions, vehicles, payloads, containers, space facilities, schedules, cost values and costing procedures, the program computes flight schedules, cargo manifests, vehicle fleet requirements, acquisition schedules and cost summaries. The program is designed to consider the Earth Orbit, Lunar, Interplanetary and Automated Satellite Programs. A general outline of the capabilities of the program are provided.

7 CFR 254.1 - General purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION ADMINISTRATION OF THE FOOD DISTRIBUTION PROGRAM FOR INDIAN HOUSEHOLDS IN OKLAHOMA § 254.1 General purpose. This part sets the requirement under which...

7 CFR 254.1 - General purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION ADMINISTRATION OF THE FOOD DISTRIBUTION PROGRAM FOR INDIAN HOUSEHOLDS IN OKLAHOMA § 254.1 General purpose. This part sets the requirement under which...

A Software Engineering Paradigm for Quick-turnaround Earth Science Data Projects

NASA Astrophysics Data System (ADS)

Moore, K.

2016-12-01

As is generally the case with applied sciences professional and educational programs, the participants of such programs can come from a variety of technical backgrounds. In the NASA DEVELOP National Program, the participants constitute an interdisciplinary set of backgrounds, with varying levels of experience with computer programming. DEVELOP makes use of geographically explicit data sets, and it is necessary to use geographic information systems and geospatial image processing environments. As data sets cover longer time spans and include more complex sets of parameters, automation is becoming an increasingly prevalent feature. Though platforms such as ArcGIS, ERDAS Imagine, and ENVI facilitate the batch-processing of geospatial imagery, these environments are naturally constricting to the user in that they limit him or her to the tools that are available. Users must then turn to "homemade" scripting in more traditional programming languages such as Python, JavaScript, or R, to automate workflows. However, in the context of quick-turnaround projects like those in DEVELOP, the programming learning curve may be prohibitively steep. In this work, we consider how to best design a software development paradigm that addresses two major constants: an arbitrarily experienced programmer and quick-turnaround project timelines.

Automating tasks in protein structure determination with the clipper python module.

PubMed

McNicholas, Stuart; Croll, Tristan; Burnley, Tom; Palmer, Colin M; Hoh, Soon Wen; Jenkins, Huw T; Dodson, Eleanor; Cowtan, Kevin; Agirre, Jon

2018-01-01

Scripting programming languages provide the fastest means of prototyping complex functionality. Those with a syntax and grammar resembling human language also greatly enhance the maintainability of the produced source code. Furthermore, the combination of a powerful, machine-independent scripting language with binary libraries tailored for each computer architecture allows programs to break free from the tight boundaries of efficiency traditionally associated with scripts. In the present work, we describe how an efficient C++ crystallographic library such as Clipper can be wrapped, adapted and generalized for use in both crystallographic and electron cryo-microscopy applications, scripted with the Python language. We shall also place an emphasis on best practices in automation, illustrating how this can be achieved with this new Python module. © 2017 The Authors Protein Science published by Wiley Periodicals, Inc. on behalf of The Protein Society.

A new automated spectral feature extraction method and its application in spectral classification and defective spectra recovery

NASA Astrophysics Data System (ADS)

Wang, Ke; Guo, Ping; Luo, A.-Li

2017-03-01

Spectral feature extraction is a crucial procedure in automated spectral analysis. This procedure starts from the spectral data and produces informative and non-redundant features, facilitating the subsequent automated processing and analysis with machine-learning and data-mining techniques. In this paper, we present a new automated feature extraction method for astronomical spectra, with application in spectral classification and defective spectra recovery. The basic idea of our approach is to train a deep neural network to extract features of spectra with different levels of abstraction in different layers. The deep neural network is trained with a fast layer-wise learning algorithm in an analytical way without any iterative optimization procedure. We evaluate the performance of the proposed scheme on real-world spectral data. The results demonstrate that our method is superior regarding its comprehensive performance, and the computational cost is significantly lower than that for other methods. The proposed method can be regarded as a new valid alternative general-purpose feature extraction method for various tasks in spectral data analysis.

Computer Technology for Industry

NASA Technical Reports Server (NTRS)

1979-01-01

In this age of the computer, more and more business firms are automating their operations for increased efficiency in a great variety of jobs, from simple accounting to managing inventories, from precise machining to analyzing complex structures. In the interest of national productivity, NASA is providing assistance both to longtime computer users and newcomers to automated operations. Through a special technology utilization service, NASA saves industry time and money by making available already developed computer programs which have secondary utility. A computer program is essentially a set of instructions which tells the computer how to produce desired information or effect by drawing upon its stored input. Developing a new program from scratch can be costly and time-consuming. Very often, however, a program developed for one purpose can readily be adapted to a totally different application. To help industry take advantage of existing computer technology, NASA operates the Computer Software Management and Information Center (COSMIC)(registered TradeMark),located at the University of Georgia. COSMIC maintains a large library of computer programs developed for NASA, the Department of Defense, the Department of Energy and other technology-generating agencies of the government. The Center gets a continual flow of software packages, screens them for adaptability to private sector usage, stores them and informs potential customers of their availability.

10 CFR 712.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... HUMAN RELIABILITY PROGRAM Establishment of and Procedures for the Human Reliability Program General Provisions § 712.1 Purpose. This part establishes the policies and procedures for a Human Reliability Program... judgment and reliability may be impaired by physical or mental/personality disorders, alcohol abuse, use of...

40 CFR 610.10 - Program purpose.

Code of Federal Regulations, 2013 CFR

2013-07-01

... DEVICES Test Procedures and Evaluation Criteria General Provisions § 610.10 Program purpose. (a) The... standardized procedures, the performance of various retrofit devices applicable to automobiles for which fuel... statistical analysis of data from vehicle tests, the evaluation program will determine the effects on fuel...

40 CFR 610.10 - Program purpose.

Code of Federal Regulations, 2014 CFR

2014-07-01

... DEVICES Test Procedures and Evaluation Criteria General Provisions § 610.10 Program purpose. (a) The... standardized procedures, the performance of various retrofit devices applicable to automobiles for which fuel... statistical analysis of data from vehicle tests, the evaluation program will determine the effects on fuel...

40 CFR 610.10 - Program purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... DEVICES Test Procedures and Evaluation Criteria General Provisions § 610.10 Program purpose. (a) The... standardized procedures, the performance of various retrofit devices applicable to automobiles for which fuel... statistical analysis of data from vehicle tests, the evaluation program will determine the effects on fuel...

40 CFR 610.10 - Program purpose.

Code of Federal Regulations, 2012 CFR

2012-07-01

... DEVICES Test Procedures and Evaluation Criteria General Provisions § 610.10 Program purpose. (a) The... standardized procedures, the performance of various retrofit devices applicable to automobiles for which fuel... statistical analysis of data from vehicle tests, the evaluation program will determine the effects on fuel...

78 FR 53466 - Modification of Two National Customs Automation Program (NCAP) Tests Concerning Automated...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-29

... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Modification of Two National Customs Automation Program (NCAP) Tests Concerning Automated Commercial Environment (ACE) Document Image System (DIS) and Simplified Entry (SE); Correction AGENCY: U.S. Customs and Border Protection, Department...

reCAPTCHA: human-based character recognition via Web security measures.

PubMed

von Ahn, Luis; Maurer, Benjamin; McMillen, Colin; Abraham, David; Blum, Manuel

2008-09-12

CAPTCHAs (Completely Automated Public Turing test to tell Computers and Humans Apart) are widespread security measures on the World Wide Web that prevent automated programs from abusing online services. They do so by asking humans to perform a task that computers cannot yet perform, such as deciphering distorted characters. Our research explored whether such human effort can be channeled into a useful purpose: helping to digitize old printed material by asking users to decipher scanned words from books that computerized optical character recognition failed to recognize. We showed that this method can transcribe text with a word accuracy exceeding 99%, matching the guarantee of professional human transcribers. Our apparatus is deployed in more than 40,000 Web sites and has transcribed over 440 million words.

Hands-On Universe: A Global Program for Education and Public Outreach in Astronomy

NASA Astrophysics Data System (ADS)

Boër, M.; Thiébaut, C.; Pack, H.; Pennypaker, C.; Isaac, M.; Melchior, A.-L.; Faye, S.; Ebisuzaki, T.

Hands-On Universe (HOU) is an educational program that enables students to investigate the Universe while applying tools and concepts from science, math, and technology. Using the Internet, HOU participants around the world request observations from an automated telescope, download images from a large image archive, and analyze them with the aid of user-friendly image processing software. This program is now in many countries, including the USA, France, Germany, Sweden, Japan, and Australia. A network of telescopes has been established, many of them remotely operated. Students in the classroom are able to make night observations during the day, using a telescope in another country. An archive of images taken on large telescopes is also accessible, as well as resources for teachers. Students deal with real research projects, e.g., the search for asteroids, which resulted in the discovery of a Kuiper Belt object by high-school students. Not only does Hands-On Universe give the general public access to professional astronomy, it also demonstrates the use of a complex automated system, data processing techniques, and automation. Using telescopes located in many countries over the globe, a powerful and genuine cooperation between teachers and children from various countries is promoted, with a clear educational goal.

SolarSoft Web Services

NASA Astrophysics Data System (ADS)

Freeland, S.; Hurlburt, N.

2005-12-01

The SolarSoft system (SSW) is a set of integrated software libraries, databases, and system utilities which provide a common programming and data analysis environment for solar physics. The system includes contributions from a large community base, representing the efforts of many NASA PI team MO&DA teams,spanning many years and multiple NASA and international orbital and ground based missions. The SSW general use libraries include Many hundreds of utilities which are instrument and mission independent. A large subset are also SOLAR independent, such as time conversions, digital detector cleanup, time series analysis, mathematics, image display, WWW server communications and the like. PI teams may draw on these general purpose libraries for analysis and application development while concentrating efforts on instrument specific calibration issues rather than reinvention of general use software. By the same token, PI teams are encouraged to contribute new applications or enhancements to existing utilities which may have more general interest. Recent areas of intense evolution include space weather applications, automated distributed data access and analysis, interfaces with the ongoing Virtual Solar Observatory efforts, and externalization of SolarSoft power through Web Services. We will discuss the current status of SSW web services and demonstrate how this facilitates accessing the underlying power of SolarSoft in more abstract terms. In this context, we will describe the use of SSW services within the Collaborative Sun Earth Connector environment.

Walk-through survey report: Control technology for metal reclamation industries at Exide/General Battery Corporation, Reading, Pennsylvania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, R.M.

1994-03-30

A walk through survey was made at Exide/General Battery Corporation, Reading, Pennsylvania to identify and evaluate control methods to reduce lead exposure. About 20,000 to 25,000 batteries a day were recycled, primarily automobile batteries. Lead and plastic from the batteries were reclaimed. The company used local exhaust ventilation, enclosed ventilated booths, partial enclosures, and automated operations throughout production areas of the site. Various occupational safety and health programs were in place including occupational and safety training, a respiratory protection program, various hygiene programs, and blood lead monitoring programs. These findings will be compared with those from other sites and themore » facility with the lowest lead exposure levels will be examined carefully so that others may be brought in line with the best of standards.« less

An Ada programming support environment

NASA Technical Reports Server (NTRS)

Tyrrill, AL; Chan, A. David

1986-01-01

The toolset of an Ada Programming Support Environment (APSE) being developed at North American Aircraft Operations (NAAO) of Rockwell International, is described. The APSE is resident on three different hosts and must support developments for the hosts and for embedded targets. Tools and developed software must be freely portable between the hosts. The toolset includes the usual editors, compilers, linkers, debuggers, configuration magnagers, and documentation tools. Generally, these are being supplied by the host computer vendors. Other tools, for example, pretty printer, cross referencer, compilation order tool, and management tools were obtained from public-domain sources, are implemented in Ada and are being ported to the hosts. Several tools being implemented in-house are of interest, these include an Ada Design Language processor based on compilable Ada. A Standalone Test Environment Generator facilitates test tool construction and partially automates unit level testing. A Code Auditor/Static Analyzer permits the Ada programs to be evaluated against measures of quality. An Ada Comment Box Generator partially automates generation of header comment boxes.

Automated Program Analysis for Cybersecurity (APAC)

DTIC Science & Technology

2016-07-14

AUTOMATED PROGRAM ANALYSIS FOR CYBERSECURITY (APAC) FIVE DIRECTIONS, INC JULY 2016 FINAL TECHNICAL REPORT APPROVED... CYBERSECURITY (APAC) 5a. CONTRACT NUMBER FA8750-14-C-0050 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 61101E 6. AUTHOR(S) William Arbaugh...AC Team Adversarial Challenge Team, responsible for creating malicious applications APAC Automated Program Analysis for Cybersecurity BAE BAE Systems

78 FR 27984 - Modification of the National Customs Automation Program Test (NCAP) Regarding Reconciliation for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... Customs Automation Program Test (NCAP) Regarding Reconciliation for Filing Certain Post-Importation Claims... Automation Program (NCAP) Reconciliation prototype test to include the filing of post-importation [[Page... notices. DATES: The test is modified to allow Reconciliation of post-importation preferential tariff...

47 CFR 73.4097 - EBS (now EAS) attention signals on automated programing systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false EBS (now EAS) attention signals on automated programing systems. 73.4097 Section 73.4097 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... (now EAS) attention signals on automated programing systems. See Public Notice dated March 1, 1979. 72...

Benchmarks of programming languages for special purposes in the space station

NASA Technical Reports Server (NTRS)

Knoebel, Arthur

1986-01-01

Although Ada is likely to be chosen as the principal programming language for the Space Station, certain needs, such as expert systems and robotics, may be better developed in special languages. The languages, LISP and Prolog, are studied and some benchmarks derived. The mathematical foundations for these languages are reviewed. Likely areas of the space station are sought out where automation and robotics might be applicable. Benchmarks are designed which are functional, mathematical, relational, and expert in nature. The coding will depend on the particular versions of the languages which become available for testing.

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 3: HARP Graphics Oriented (GO) input user's guide

NASA Technical Reports Server (NTRS)

Bavuso, Salvatore J.; Rothmann, Elizabeth; Mittal, Nitin; Koppen, Sandra Howell

1994-01-01

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems, and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical preprocessor Graphics Oriented (GO) program. GO is a graphical user interface for the HARP engine that enables the drawing of reliability/availability models on a monitor. A mouse is used to select fault tree gates or Markov graphical symbols from a menu for drawing.

10 CFR 490.1 - Purpose and Scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Purpose and Scope. 490.1 Section 490.1 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM General Provisions § 490.1 Purpose and Scope. (a) The provisions of this part implement the alternative fuel transportation program...

10 CFR 490.1 - Purpose and Scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Purpose and Scope. 490.1 Section 490.1 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM General Provisions § 490.1 Purpose and Scope. (a) The provisions of this part implement the alternative fuel transportation program...

10 CFR 490.1 - Purpose and Scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Purpose and Scope. 490.1 Section 490.1 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM General Provisions § 490.1 Purpose and Scope. (a) The provisions of this part implement the alternative fuel transportation program...

10 CFR 490.1 - Purpose and Scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Purpose and Scope. 490.1 Section 490.1 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM General Provisions § 490.1 Purpose and Scope. (a) The provisions of this part implement the alternative fuel transportation program...

10 CFR 490.1 - Purpose and Scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Purpose and Scope. 490.1 Section 490.1 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM General Provisions § 490.1 Purpose and Scope. (a) The provisions of this part implement the alternative fuel transportation program...

20 CFR 408.105 - Purpose and administration of the program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Purpose and administration of the program. 408.105 Section 408.105 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Introduction, General Provision and Definitions § 408.105 Purpose and...

20 CFR 408.105 - Purpose and administration of the program.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Purpose and administration of the program. 408.105 Section 408.105 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Introduction, General Provision and Definitions § 408.105 Purpose and...

20 CFR 408.105 - Purpose and administration of the program.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Purpose and administration of the program. 408.105 Section 408.105 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Introduction, General Provision and Definitions § 408.105 Purpose and...

20 CFR 408.105 - Purpose and administration of the program.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Purpose and administration of the program. 408.105 Section 408.105 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Introduction, General Provision and Definitions § 408.105 Purpose and...

20 CFR 408.105 - Purpose and administration of the program.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Purpose and administration of the program. 408.105 Section 408.105 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Introduction, General Provision and Definitions § 408.105 Purpose and...

The ZOG Technology Demonstration Project: A System Evaluation of USS CARL VINSON (CVN 70)

DTIC Science & Technology

1984-12-01

part of a larger project involving development of a wide range of computer technologies, including artifcial intelligence and a long-range computer...shipboard manage- ment, aircraft management, expert systems, menu selection, man- machine interface, artificial intelligence , automation; shipboard It AWM...functions, planning, evaluation, training, hierarchical data bases The objective of this project was to conduct an evaluation of ZOG, a general purpose

Automatic control model of water filling system with Allen Bradley Micrologix 1400 PLC

NASA Astrophysics Data System (ADS)

Harahap, R.; Adyatma, AF; Fahmi, F.

2018-02-01

Programmable Logic Controller or PLC today plays an important role in most industrial control systems. PLC usage can be encountered in almost all fields of industry, not only in the manufacturing world but also on many other things such as elevators in office buildings, hotels hospitals, and others. PLC is an electronic control tool that operates in logic that its programming can be modified with relative ease. As with any controller in general, the PLC processes input signals to further discharge output according to the desired program. PLC usage is very broad because of its high reliability, can be reprogrammed or modified with relative ease, and very helpful in the tracking troubleshooting. One type of existing PLC is Allen Bradley PLC. Allen Bradley PLC program is commonly used in various industries. PLC Allen Bradley (AB) has several types, and one of them is the type of Micrologic 1400. In this study we design a system as a comparison with the conventional system. For that to explore the use of a PLC program which will be supported by a simulator tool, including a program to RSLogic 500, how to programming, monitoring via RSView32, and modification. It is expected to understand the application aspect of operation and programming of this specific PLC and its potential. The purpose of this research is to design water filling automation system by using Allen Bradley Micrologic 1400 type 1766-L32BXB PLC, empowering the use of Allen Bradley Micrologic 1400 PLC and to regulate the desired process to obtain efficiency and effectiveness compared with conventional system arrangement using Relay.

The Opinion of Mr. Justice Douglas in the Case of Robert Gottschalk, Acting Commissioner of Patents, vs. Gary R. Benson and Arthur C. Tabbot, Delivered in the Supreme Court of the United States on November 20, 1972.

ERIC Educational Resources Information Center

Supreme Court of the U. S., Washington, DC.

Respondents filed in the Patent Office an application for an invention which was described as being related to the processing of data by program and more particularly to the programmed conversion of numerical information in general purpose digital computers. The patent sought is on a method of programming a general purpose digital computer to…

Planning Complex Projects Automatically

NASA Technical Reports Server (NTRS)

Henke, Andrea L.; Stottler, Richard H.; Maher, Timothy P.

1995-01-01

Automated Manifest Planner (AMP) computer program applies combination of artificial-intelligence techniques to assist both expert and novice planners, reducing planning time by orders of magnitude. Gives planners flexibility to modify plans and constraints easily, without need for programming expertise. Developed specifically for planning space shuttle missions 5 to 10 years ahead, with modifications, applicable in general to planning other complex projects requiring scheduling of activities depending on other activities and/or timely allocation of resources. Adaptable to variety of complex scheduling problems in manufacturing, transportation, business, architecture, and construction.

General Monte Carlo reliability simulation code including common mode failures and HARP fault/error-handling

NASA Technical Reports Server (NTRS)

Platt, M. E.; Lewis, E. E.; Boehm, F.

1991-01-01

A Monte Carlo Fortran computer program was developed that uses two variance reduction techniques for computing system reliability applicable to solving very large highly reliable fault-tolerant systems. The program is consistent with the hybrid automated reliability predictor (HARP) code which employs behavioral decomposition and complex fault-error handling models. This new capability is called MC-HARP which efficiently solves reliability models with non-constant failures rates (Weibull). Common mode failure modeling is also a specialty.

The value of the Semantic Web in the laboratory.

PubMed

Frey, Jeremy G

2009-06-01

The Semantic Web is beginning to impact on the wider chemical and physical sciences, beyond the earlier adopted bio-informatics. While useful in large-scale data driven science with automated processing, these technologies can also help integrate the work of smaller scale laboratories producing diverse data. The semantics aid the discovery, reliable re-use of data, provide improved provenance and facilitate automated processing by increased resilience to changes in presentation and reduced ambiguity. The Semantic Web, its tools and collections are not yet competitive with well-established solutions to current problems. It is in the reduced cost of instituting solutions to new problems that the versatility of Semantic Web-enabled data and resources will make their mark once the more general-purpose tools are more available.

40 CFR 123.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Purpose and scope. 123.1 Section 123.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS General § 123.1 Purpose and scope. (a) This part specifies the procedures EPA will follow in...

40 CFR 147.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Purpose and scope. 147.1 Section 147.1..., TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS General Provisions § 147.1 Purpose and scope. (a) This part sets forth the applicable Underground Injection Control (UIC) programs for...

40 CFR 147.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Purpose and scope. 147.1 Section 147.1..., TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS General Provisions § 147.1 Purpose and scope. (a) This part sets forth the applicable Underground Injection Control (UIC) programs for...

40 CFR 123.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Purpose and scope. 123.1 Section 123.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS General § 123.1 Purpose and scope. (a) This part specifies the procedures EPA will follow in...

40 CFR 123.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Purpose and scope. 123.1 Section 123.1 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS General § 123.1 Purpose and scope. (a) This part specifies the procedures EPA will follow in...

Not all trust is created equal: dispositional and history-based trust in human-automation interactions.

PubMed

Merritt, Stephanie M; Ilgen, Daniel R

2008-04-01

We provide an empirical demonstration of the importance of attending to human user individual differences in examinations of trust and automation use. Past research has generally supported the notions that machine reliability predicts trust in automation, and trust in turn predicts automation use. However, links between user personality and perceptions of the machine with trust in automation have not been empirically established. On our X-ray screening task, 255 students rated trust and made automation use decisions while visually searching for weapons in X-ray images of luggage. We demonstrate that individual differences affect perceptions of machine characteristics when actual machine characteristics are constant, that perceptions account for 52% of trust variance above the effects of actual characteristics, and that perceptions mediate the effects of actual characteristics on trust. Importantly, we also demonstrate that when administered at different times, the same six trust items reflect two types of trust (dispositional trust and history-based trust) and that these two trust constructs are differentially related to other variables. Interactions were found among user characteristics, machine characteristics, and automation use. Our results suggest that increased specificity in the conceptualization and measurement of trust is required, future researchers should assess user perceptions of machine characteristics in addition to actual machine characteristics, and incorporation of user extraversion and propensity to trust machines can increase prediction of automation use decisions. Potential applications include the design of flexible automation training programs tailored to individuals who differ in systematic ways.

SpikeGUI: software for rapid interictal discharge annotation via template matching and online machine learning.

PubMed

Jing Jin; Dauwels, Justin; Cash, Sydney; Westover, M Brandon

2014-01-01

Detection of interictal discharges is a key element of interpreting EEGs during the diagnosis and management of epilepsy. Because interpretation of clinical EEG data is time-intensive and reliant on experts who are in short supply, there is a great need for automated spike detectors. However, attempts to develop general-purpose spike detectors have so far been severely limited by a lack of expert-annotated data. Huge databases of interictal discharges are therefore in great demand for the development of general-purpose detectors. Detailed manual annotation of interictal discharges is time consuming, which severely limits the willingness of experts to participate. To address such problems, a graphical user interface "SpikeGUI" was developed in our work for the purposes of EEG viewing and rapid interictal discharge annotation. "SpikeGUI" substantially speeds up the task of annotating interictal discharges using a custom-built algorithm based on a combination of template matching and online machine learning techniques. While the algorithm is currently tailored to annotation of interictal epileptiform discharges, it can easily be generalized to other waveforms and signal types.

SpikeGUI: Software for Rapid Interictal Discharge Annotation via Template Matching and Online Machine Learning

PubMed Central

Jin, Jing; Dauwels, Justin; Cash, Sydney; Westover, M. Brandon

2015-01-01

Detection of interictal discharges is a key element of interpreting EEGs during the diagnosis and management of epilepsy. Because interpretation of clinical EEG data is time-intensive and reliant on experts who are in short supply, there is a great need for automated spike detectors. However, attempts to develop general-purpose spike detectors have so far been severely limited by a lack of expert-annotated data. Huge databases of interictal discharges are therefore in great demand for the development of general-purpose detectors. Detailed manual annotation of interictal discharges is time consuming, which severely limits the willingness of experts to participate. To address such problems, a graphical user interface “SpikeGUI” was developed in our work for the purposes of EEG viewing and rapid interictal discharge annotation. “SpikeGUI” substantially speeds up the task of annotating interictal discharges using a custom-built algorithm based on a combination of template matching and online machine learning techniques. While the algorithm is currently tailored to annotation of interictal epileptiform discharges, it can easily be generalized to other waveforms and signal types. PMID:25570976

Social cohesion: The missing factor required for a successful hand hygiene program.

PubMed

Kwok, Yen Lee Angela; Harris, Peter; McLaws, Mary-Louise

2017-03-01

There are limited explorations into hospital staff reactions to automated hand hygiene surveillance or hand hygiene interventions. An automated surveillance system with daily feedback and a behavioral intervention component was trialed in 2 wards in an Australian tertiary teaching hospital. After 9 months, 12 clinicians from each ward were interviewed prior to the completion of the trial to explore satisfaction with the system and behavioral component of nudging each other with a reminder to comply. Only on completion of the trial were transcripts analyzed for themes. Staff from the ward with improved compliance described a socially cohesive team with a well-liked nurse unit manager who accessed daily compliance rates and worked with staff to set goals. This contrasted with the ward without improvement in compliance, whose staff described their great reluctance and discomfort to nudge each other to comply and distrust of the authenticity of the rates established from the automated system. Interventions for improving compliance are more likely to be successful in a ward with a social cohesive team. Patient safety interventions, in the first instance, may benefit from purposeful selection of wards with cohesive teams and skilled leaders who can transform clinicians into early adopters of the program. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

An Investigation of Joint Service Acquisition Logistics Issues/Problems and Automated Joint Program Support.

DTIC Science & Technology

1984-09-01

Management Information System (ALMIS) to address them. Literature was surveyed and problems were summarized and developed into a questionnaire. Structured interviews were then conducted with over 100 different Air Force and civilian upper and middle JSAP managers. Many general and specific problems and issues were identified and validated using statistical and qualitative methods. General use of ALMIS to address certain joint service problem areas was confirmed. Potential use and desirable capabilities for ALMIS were also determined. Recommendations for ALMIS

Automated platform for designing multiple robot work cells

NASA Astrophysics Data System (ADS)

Osman, N. S.; Rahman, M. A. A.; Rahman, A. A. Abdul; Kamsani, S. H.; Bali Mohamad, B. M.; Mohamad, E.; Zaini, Z. A.; Rahman, M. F. Ab; Mohamad Hatta, M. N. H.

2017-06-01

Designing the multiple robot work cells is very knowledge-intensive, intricate, and time-consuming process. This paper elaborates the development process of a computer-aided design program for generating the multiple robot work cells which offer a user-friendly interface. The primary purpose of this work is to provide a fast and easy platform for less cost and human involvement with minimum trial and errors adjustments. The automated platform is constructed based on the variant-shaped configuration concept with its mathematical model. A robot work cell layout, system components, and construction procedure of the automated platform are discussed in this paper where integration of these items will be able to automatically provide the optimum robot work cell design according to the information set by the user. This system is implemented on top of CATIA V5 software and utilises its Part Design, Assembly Design, and Macro tool. The current outcomes of this work provide a basis for future investigation in developing a flexible configuration system for the multiple robot work cells.

42 CFR 1002.1 - Scope and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Scope and purpose. 1002.1 Section 1002.1 Public Health OFFICE OF INSPECTOR GENERAL-HEALTH CARE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OIG AUTHORITIES PROGRAM INTEGRITY-STATE-INITIATED EXCLUSIONS FROM MEDICAID General Provisions § 1002.1 Scope and purpose...

7 CFR 253.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Distribution Program and the Food Stamp Program on Indian reservations when such concurrent operation is... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION ADMINISTRATION OF THE FOOD DISTRIBUTION PROGRAM...

7 CFR 253.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Distribution Program and the Food Stamp Program on Indian reservations when such concurrent operation is... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND POLICIES-FOOD DISTRIBUTION ADMINISTRATION OF THE FOOD DISTRIBUTION PROGRAM...

SCTE: An open-source Perl framework for testing equipment control and data acquisition

NASA Astrophysics Data System (ADS)

Mostaço-Guidolin, Luiz C.; Frigori, Rafael B.; Ruchko, Leonid; Galvão, Ricardo M. O.

2012-07-01

SCTE intends to provide a simple, yet powerful, framework for building data acquisition and equipment control systems for experimental Physics, and correlated areas. Via its SCTE::Instrument module, RS-232, USB, and LAN buses are supported, and the intricacies of hardware communication are encapsulated underneath an object oriented abstraction layer. Written in Perl, and using the SCPI protocol, enabled instruments can be easily programmed to perform a wide variety of tasks. While this work presents general aspects of the development of data acquisition systems using the SCTE framework, it is illustrated by particular applications designed for the calibration of several in-house developed devices for power measurement in the tokamak TCABR Alfvén Waves Excitement System. Catalogue identifier: AELZ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AELZ_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License Version 3 No. of lines in distributed program, including test data, etc.: 13 811 No. of bytes in distributed program, including test data, etc.: 743 709 Distribution format: tar.gz Programming language: Perl version 5.10.0 or higher. Computer: PC. SCPI capable digital oscilloscope, with RS-232, USB, or LAN communication ports, null modem, USB, or Ethernet cables Operating system: GNU/Linux (2.6.28-11), should also work on any Unix-based operational system Classification: 4.14 External routines: Perl modules: Device::SerialPort, Term::ANSIColor, Math::GSL, Net::HTTP. Gnuplot 4.0 or higher Nature of problem: Automation of experiments and data acquisition often requires expensive equipment and in-house development of software applications. Nowadays personal computers and test equipment come with fast and easy-to-use communication ports. Instrument vendors often supply application programs capable of controlling such devices, but are very restricted in terms of functionalities. For instance, they are not capable of controlling more than one test equipment at a same time or to automate repetitive tasks. SCTE provides a way of using auxiliary equipment in order to automate experiment procedures at low cost using only free, and open-source operational system and libraries. Solution method: SCTE provides a Perl module that implements RS-232, USB, and LAN communication allowing the use of SCPI capable instruments [1]. Therefore providing a straightforward way of creating automation and data acquisition applications using personal computers and testing instruments [2]. SCPI Consortium, Standard Commands for Programmable Instruments, 1999, http://www.scpiconsortium.org. L.C.B. Mostaço-Guidolin, Determinação da configuração de ondas de Alfvén excitadas no tokamak TCABR, Master's thesis, Universidade de São Paulo (2007), http://www.teses.usp.br/teses/disponiveis/43/43134/tde-23042009-230419/.

34 CFR 674.1 - Purpose and identification of common provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM General Provisions § 674.1 Purpose and identification of common provisions. (a) The Federal Perkins Loan Program provides low-interest... educational costs. (b)(1) The Federal Perkins Loan Program, authorized by title IV-E of the Higher Education...

34 CFR 674.1 - Purpose and identification of common provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM General Provisions § 674.1 Purpose and identification of common provisions. (a) The Federal Perkins Loan Program provides low-interest... educational costs. (b)(1) The Federal Perkins Loan Program, authorized by title IV-E of the Higher Education...

A Automated Tool for Supporting FMEAs of Digital Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue,M.; Chu, T.-L.; Martinez-Guridi, G.

2008-09-07

Although designs of digital systems can be very different from each other, they typically use many of the same types of generic digital components. Determining the impacts of the failure modes of these generic components on a digital system can be used to support development of a reliability model of the system. A novel approach was proposed for such a purpose by decomposing the system into a level of the generic digital components and propagating failure modes to the system level, which generally is time-consuming and difficult to implement. To overcome the associated issues of implementing the proposed FMEA approach,more » an automated tool for a digital feedwater control system (DFWCS) has been developed in this study. The automated FMEA tool is in nature a simulation platform developed by using or recreating the original source code of the different module software interfaced by input and output variables that represent physical signals exchanged between modules, the system, and the controlled process. For any given failure mode, its impacts on associated signals are determined first and the variables that correspond to these signals are modified accordingly by the simulation. Criteria are also developed, as part of the simulation platform, to determine whether the system has lost its automatic control function, which is defined as a system failure in this study. The conceptual development of the automated FMEA support tool can be generalized and applied to support FMEAs for reliability assessment of complex digital systems.« less

Analysis of irradiated U-7wt%Mo dispersion fuel microstructures using automated image processing

DOE PAGES

Collette, R.; King, J.; Buesch, C.; ...

2016-04-01

The High Performance Research Reactor Fuel Development (HPPRFD) program is responsible for developing low enriched uranium (LEU) fuel substitutes for high performance reactors fueled with highly enriched uranium (HEU) that have not yet been converted to LEU. The uranium-molybdenum (U-Mo) fuel system was selected for this effort. In this study, fission gas pore segmentation was performed on U-7wt%Mo dispersion fuel samples at three separate fission densities using an automated image processing interface developed in MATLAB. Pore size distributions were attained that showed both expected and unexpected fission gas behavior. In general, it proved challenging to identify any dominant trends whenmore » comparing fission bubble data across samples from different fuel plates due to varying compositions and fabrication techniques. Here, the results exhibited fair agreement with the fission density vs. porosity correlation developed by the Russian reactor conversion program.« less

Analysis of irradiated U-7wt%Mo dispersion fuel microstructures using automated image processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collette, R.; King, J.; Buesch, C.

The High Performance Research Reactor Fuel Development (HPPRFD) program is responsible for developing low enriched uranium (LEU) fuel substitutes for high performance reactors fueled with highly enriched uranium (HEU) that have not yet been converted to LEU. The uranium-molybdenum (U-Mo) fuel system was selected for this effort. In this study, fission gas pore segmentation was performed on U-7wt%Mo dispersion fuel samples at three separate fission densities using an automated image processing interface developed in MATLAB. Pore size distributions were attained that showed both expected and unexpected fission gas behavior. In general, it proved challenging to identify any dominant trends whenmore » comparing fission bubble data across samples from different fuel plates due to varying compositions and fabrication techniques. Here, the results exhibited fair agreement with the fission density vs. porosity correlation developed by the Russian reactor conversion program.« less

Wet Lab Accelerator: A Web-Based Application Democratizing Laboratory Automation for Synthetic Biology.

PubMed

Bates, Maxwell; Berliner, Aaron J; Lachoff, Joe; Jaschke, Paul R; Groban, Eli S

2017-01-20

Wet Lab Accelerator (WLA) is a cloud-based tool that allows a scientist to conduct biology via robotic control without the need for any programming knowledge. A drag and drop interface provides a convenient and user-friendly method of generating biological protocols. Graphically developed protocols are turned into programmatic instruction lists required to conduct experiments at the cloud laboratory Transcriptic. Prior to the development of WLA, biologists were required to write in a programming language called "Autoprotocol" in order to work with Transcriptic. WLA relies on a new abstraction layer we call "Omniprotocol" to convert the graphical experimental description into lower level Autoprotocol language, which then directs robots at Transcriptic. While WLA has only been tested at Transcriptic, the conversion of graphically laid out experimental steps into Autoprotocol is generic, allowing extension of WLA into other cloud laboratories in the future. WLA hopes to democratize biology by bringing automation to general biologists.

An interactive modular design for computerized photometry in spectrochemical analysis

NASA Technical Reports Server (NTRS)

Bair, V. L.

1980-01-01

A general functional description of totally automatic photometry of emission spectra is not available for an operating environment in which the sample compositions and analysis procedures are low-volume and non-routine. The advantages of using an interactive approach to computer control in such an operating environment are demonstrated. This approach includes modular subroutines selected at multiple-option, menu-style decision points. This style of programming is used to trace elemental determinations, including the automated reading of spectrographic plates produced by a 3.4 m Ebert mount spectrograph using a dc-arc in an argon atmosphere. The simplified control logic and modular subroutine approach facilitates innovative research and program development, yet is easily adapted to routine tasks. Operator confidence and control are increased by the built-in options including degree of automation, amount of intermediate data printed out, amount of user prompting, and multidirectional decision points.

Automated vehicle guidance using discrete reference markers. [road surface steering techniques

NASA Technical Reports Server (NTRS)

Johnston, A. R.; Assefi, T.; Lai, J. Y.

1979-01-01

Techniques for providing steering control for an automated vehicle using discrete reference markers fixed to the road surface are investigated analytically. Either optical or magnetic approaches can be used for the sensor, which generates a measurement of the lateral offset of the vehicle path at each marker to form the basic data for steering control. Possible mechanizations of sensor and controller are outlined. Techniques for handling certain anomalous conditions, such as a missing marker, or loss of acquisition, and special maneuvers, such as u-turns and switching, are briefly discussed. A general analysis of the vehicle dynamics and the discrete control system is presented using the state variable formulation. Noise in both the sensor measurement and in the steering servo are accounted for. An optimal controller is simulated on a general purpose computer, and the resulting plots of vehicle path are presented. Parameters representing a small multipassenger tram were selected, and the simulation runs show response to an erroneous sensor measurement and acquisition following large initial path errors.

Comparison of variability in breast density assessment by BI-RADS category according to the level of experience.

PubMed

Eom, Hye-Joung; Cha, Joo Hee; Kang, Ji-Won; Choi, Woo Jung; Kim, Han Jun; Go, EunChae

2018-05-01

Background Only few studies have assessed variability in the results obtained by the readers with different experience levels in comparison with automated volumetric breast density measurements. Purpose To examine the variations in breast density assessment according to BI-RADS categories among readers with different experience levels and to compare it with the results of automated quantitative measurements. Material and Methods Density assignment was done for 1000 screening mammograms by six readers with three different experience levels (breast-imaging experts, general radiologists, and students). Agreement level between the results obtained by the readers and the Volpara automated volumetric breast density measurements was assessed. The agreement analysis using two categories-non-dense and dense breast tissue-was also performed. Results Intra-reader agreement for experts, general radiologists, and students were almost perfect or substantial (k = 0.74-0.95). The agreement between visual assessments of the breast-imaging experts and volumetric assessments by Volpara was substantial (k = 0.77). The agreement was moderate between the experts and general radiologists (k = 0.67) and slight between the students and Volpara (k = 0.01). The agreement for the two category groups (nondense and dense) was almost perfect between the experts and Volpara (k = 0.83). The agreement was substantial between the experts and general radiologists (k = 0.78). Conclusion We observed similar high agreement levels between visual assessments of breast density performed by radiologists and the volumetric assessments. However, agreement levels were substantially lower for the untrained readers.

Specification and Error Pattern Based Program Monitoring

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Johnson, Scott; Rosu, Grigore; Clancy, Daniel (Technical Monitor)

2001-01-01

We briefly present Java PathExplorer (JPAX), a tool developed at NASA Ames for monitoring the execution of Java programs. JPAX can be used not only during program testing to reveal subtle errors, but also can be applied during operation to survey safety critical systems. The tool facilitates automated instrumentation of a program in order to properly observe its execution. The instrumentation can be either at the bytecode level or at the source level when the source code is available. JPaX is an instance of a more general project, called PathExplorer (PAX), which is a basis for experiments rather than a fixed system, capable of monitoring various programming languages and experimenting with other logics and analysis techniques

48 CFR 719.271-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 719.271-1 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Policies 719.271-1 General. The purpose of this section is to prescribe responsibilities and procedures for carrying out the small business program policy set forth in 219.270, and in...

48 CFR 719.271-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 719.271-1 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Policies 719.271-1 General. The purpose of this section is to prescribe responsibilities and procedures for carrying out the small business program policy set forth in 219.270, and in...

CIRCAL-2 - General-purpose on-line circuit design.

NASA Technical Reports Server (NTRS)

Dertouzos, M. L.; Jessel, G. P.; Stinger, J. R.

1972-01-01

CIRCAL-2 is a second-generation general-purpose on-line circuit-design program with the following main features: (1) multiple-analysis capability; (2) uniform and general data structures for handling text editing, network representations, and output results, regardless of analysis; (3) special techniques and structures for minimizing and controlling user-program interaction; (4) use of functionals for the description of hysteresis and heat effects; and (5) ability to define optimization procedures that 'replace' the user. The paper discusses the organization of CIRCAL-2, the aforementioned main features, and their consequences, such as a set of network elements and models general enough for most analyses and a set of functions tailored to circuit-design requirements. The presentation is descriptive, concentrating on conceptual rather than on program implementation details.

45 CFR 309.145 - What costs are allowable for Tribal IV-D programs carried out under § 309.65(a) of this part?

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (h) Automated data processing computer systems, including: (1) Planning efforts in the identification, evaluation, and selection of an automated data processing computer system solution meeting the program... existing automated data processing computer system to support Tribal IV-D program operations, and...

45 CFR 309.145 - What costs are allowable for Tribal IV-D programs carried out under § 309.65(a) of this part?

Code of Federal Regulations, 2013 CFR

2013-10-01

.... (h) Automated data processing computer systems, including: (1) Planning efforts in the identification, evaluation, and selection of an automated data processing computer system solution meeting the program... existing automated data processing computer system to support Tribal IV-D program operations, and...

45 CFR 309.145 - What costs are allowable for Tribal IV-D programs carried out under § 309.65(a) of this part?

Code of Federal Regulations, 2014 CFR

2014-10-01

.... (h) Automated data processing computer systems, including: (1) Planning efforts in the identification, evaluation, and selection of an automated data processing computer system solution meeting the program... existing automated data processing computer system to support Tribal IV-D program operations, and...

45 CFR 309.145 - What costs are allowable for Tribal IV-D programs carried out under § 309.65(a) of this part?

Code of Federal Regulations, 2012 CFR

2012-10-01

.... (h) Automated data processing computer systems, including: (1) Planning efforts in the identification, evaluation, and selection of an automated data processing computer system solution meeting the program... existing automated data processing computer system to support Tribal IV-D program operations, and...

45 CFR 309.145 - What costs are allowable for Tribal IV-D programs carried out under § 309.65(a) of this part?

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (h) Automated data processing computer systems, including: (1) Planning efforts in the identification, evaluation, and selection of an automated data processing computer system solution meeting the program... existing automated data processing computer system to support Tribal IV-D program operations, and...

24 CFR 990.310 - Purpose-General policy on financial management, monitoring and reporting.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Management Systems, Monitoring, and Reporting § 990.310 Purpose—General policy on financial management, monitoring and reporting. All PHA financial management systems, reporting, and monitoring of program... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Purpose-General policy on financial...

A Program of Physical Education for Vocational Technical Schools of Connecticut.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Bureau of Vocational-Technical Schools.

These recommendations and suggestions are intended as a guide for the development of a well-balanced program of physical education in vocational schools. Introductory materials outline the purpose, aims, and objectives of a physical education program as well as the general philosophy and goals, program goals and their objectives, general policies,…

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aviation Safety Reporting Program... GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against... to the National Aeronautics and Space Administration under the Aviation Safety Reporting Program (or...

General Purpose Electronic Test Equipment (GPETE) Acquisition Considerations for Automated Calibration.

DTIC Science & Technology

1983-06-01

of this repat) U7NCLASSIFIED ISo. OECLASSI PICATION/i DOWNGRADING SCHEDULE IS, OIS? UUTION STATEMENT (fo Sie ftepoe) Approved for public release...26 1. GPETS Initial Outfitt ng (GINO) ..... 26 2. GPETE End Item Replacement (GEIR) * . . 27 D. GINO REQUIREMENTS DETERMINYATION .. . . . 28 E...interval of a sample of 305 GPETE items increased from 8.8 tc 13.6 months. The estimated annual savings resui- ng from this increase was 18.000

45 CFR 79.1 - Basis and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Basis and purpose. 79.1 Section 79.1 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES § 79.1 Basis and purpose. (a) Basis. This part implements the Program Fraud Civil Remedies Act of 1986, Pub. L...

The impact of cockpit automation on crew coordination and communication. Volume 1: Overview, LOFT evaluations, error severity, and questionnaire data

NASA Technical Reports Server (NTRS)

Wiener, Earl L.; Chidester, Thomas R.; Kanki, Barbara G.; Palmer, Everett A.; Curry, Renwick E.; Gregorich, Steven E.

1991-01-01

The purpose was to examine, jointly, cockpit automation and social processes. Automation was varied by the choice of two radically different versions of the DC-9 series aircraft, the traditional DC-9-30, and the glass cockpit derivative, the MD-88. Airline pilot volunteers flew a mission in the simulator for these aircraft. Results show that the performance differences between the crews of the two aircraft were generally small, but where there were differences, they favored the DC-9. There were no criteria on which the MD-88 crews performed better than the DC-9 crews. Furthermore, DC-9 crews rated their own workload as lower than did the MD-88 pilots. There were no significant differences between the two aircraft types with respect to the severity of errors committed during the Line-Oriented Flight Training (LOFT) flight. The attitude questionnaires provided some interesting insights, but failed to distinguish between DC-9 and MD-88 crews.

Visualization for Hyper-Heuristics. Front-End Graphical User Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kroenung, Lauren

Modern society is faced with ever more complex problems, many of which can be formulated as generate-and-test optimization problems. General-purpose optimization algorithms are not well suited for real-world scenarios where many instances of the same problem class need to be repeatedly and efficiently solved because they are not targeted to a particular scenario. Hyper-heuristics automate the design of algorithms to create a custom algorithm for a particular scenario. While such automated design has great advantages, it can often be difficult to understand exactly how a design was derived and why it should be trusted. This project aims to address thesemore » issues of usability by creating an easy-to-use graphical user interface (GUI) for hyper-heuristics to support practitioners, as well as scientific visualization of the produced automated designs. My contributions to this project are exhibited in the user-facing portion of the developed system and the detailed scientific visualizations created from back-end data.« less

Model Checking JAVA Programs Using Java Pathfinder

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Pressburger, Thomas

2000-01-01

This paper describes a translator called JAVA PATHFINDER from JAVA to PROMELA, the "programming language" of the SPIN model checker. The purpose is to establish a framework for verification and debugging of JAVA programs based on model checking. This work should be seen in a broader attempt to make formal methods applicable "in the loop" of programming within NASA's areas such as space, aviation, and robotics. Our main goal is to create automated formal methods such that programmers themselves can apply these in their daily work (in the loop) without the need for specialists to manually reformulate a program into a different notation in order to analyze the program. This work is a continuation of an effort to formally verify, using SPIN, a multi-threaded operating system programmed in Lisp for the Deep-Space 1 spacecraft, and of previous work in applying existing model checkers and theorem provers to real applications.

Laboratory automation in a functional programming language.

PubMed

Runciman, Colin; Clare, Amanda; Harkness, Rob

2014-12-01

After some years of use in academic and research settings, functional languages are starting to enter the mainstream as an alternative to more conventional programming languages. This article explores one way to use Haskell, a functional programming language, in the development of control programs for laboratory automation systems. We give code for an example system, discuss some programming concepts that we need for this example, and demonstrate how the use of functional programming allows us to express and verify properties of the resulting code. © 2014 Society for Laboratory Automation and Screening.

45 CFR 287.5 - What is the purpose and scope of the NEW Program?

Code of Federal Regulations, 2010 CFR

2010-10-01

... NATIVE EMPLOYMENT WORKS (NEW) PROGRAM General NEW Provisions § 287.5 What is the purpose and scope of the... Native organizations, the opportunity to provide work activities and services to their needy clients. ...

The historical development and basis of human factors guidelines for automated systems in aeronautical operations

NASA Technical Reports Server (NTRS)

Ciciora, J. A.; Leonard, S. D.; Johnson, N.; Amell, J.

1984-01-01

In order to derive general design guidelines for automated systems a study was conducted on the utilization and acceptance of existing automated systems as currently employed in several commercial fields. Four principal study area were investigated by means of structured interviews, and in some cases questionnaires. The study areas were aviation, a both scheduled airline and general commercial aviation; process control and factory applications; office automation; and automation in the power industry. The results of over eighty structured interviews were analyzed and responses categoried as various human factors issues for use by both designers and users of automated equipment. These guidelines address such items as general physical features of automated equipment; personnel orientation, acceptance, and training; and both personnel and system reliability.

Grid sensitivity capability for large scale structures

NASA Technical Reports Server (NTRS)

Nagendra, Gopal K.; Wallerstein, David V.

1989-01-01

The considerations and the resultant approach used to implement design sensitivity capability for grids into a large scale, general purpose finite element system (MSC/NASTRAN) are presented. The design variables are grid perturbations with a rather general linking capability. Moreover, shape and sizing variables may be linked together. The design is general enough to facilitate geometric modeling techniques for generating design variable linking schemes in an easy and straightforward manner. Test cases have been run and validated by comparison with the overall finite difference method. The linking of a design sensitivity capability for shape variables in MSC/NASTRAN with an optimizer would give designers a powerful, automated tool to carry out practical optimization design of real life, complicated structures.

DG-AMMOS: a new tool to generate 3d conformation of small molecules using distance geometry and automated molecular mechanics optimization for in silico screening.

PubMed

Lagorce, David; Pencheva, Tania; Villoutreix, Bruno O; Miteva, Maria A

2009-11-13

Discovery of new bioactive molecules that could enter drug discovery programs or that could serve as chemical probes is a very complex and costly endeavor. Structure-based and ligand-based in silico screening approaches are nowadays extensively used to complement experimental screening approaches in order to increase the effectiveness of the process and facilitating the screening of thousands or millions of small molecules against a biomolecular target. Both in silico screening methods require as input a suitable chemical compound collection and most often the 3D structure of the small molecules has to be generated since compounds are usually delivered in 1D SMILES, CANSMILES or in 2D SDF formats. Here, we describe the new open source program DG-AMMOS which allows the generation of the 3D conformation of small molecules using Distance Geometry and their energy minimization via Automated Molecular Mechanics Optimization. The program is validated on the Astex dataset, the ChemBridge Diversity database and on a number of small molecules with known crystal structures extracted from the Cambridge Structural Database. A comparison with the free program Balloon and the well-known commercial program Omega generating the 3D of small molecules is carried out. The results show that the new free program DG-AMMOS is a very efficient 3D structure generator engine. DG-AMMOS provides fast, automated and reliable access to the generation of 3D conformation of small molecules and facilitates the preparation of a compound collection prior to high-throughput virtual screening computations. The validation of DG-AMMOS on several different datasets proves that generated structures are generally of equal quality or sometimes better than structures obtained by other tested methods.

THE INTERACTIVE AUTOMATIC SYNDROME DIAGNOSTIC PROGRAM OF DIGESTIVE SYSTEM DISEASES "ELECTRONIC POLICLINIC".

PubMed

Mishlanov, V Yu; Katkova, A V; Dugina, A A; Kuznetzova, V D; Tepanyan, A T; Zhygulev, A N

The aim of the study was to estimate clinical efficiency of the interactive automatic program of digestive system diseases diagnostics "Electronic policlinic". Material was presented by 22 patients with different gastroenterological diseases (duodenal ulcer, chronical gastritis, chronical pancreatitis) and the comparative group consisted of 20 healthy people. The plan of the research included the interactive questionnaire using diagnostic module digestive system diseases of the digestive system of the automated program "Electronic policlinic" (Certificate No. 2012614202 from 12.05.12) posted on the Internet (http://klinikcity.ru). For the purpose of verification of diagnosis patients underwent fibrogastroduodenoscopy, ultrasound examination of abdominal cavity organs, CT scan, sigmoidoscopy, colonoscopy, barium enema. As the result of the study there were showed that interactive automated system was able to reveal 85,7% of patients with chronical gastritis, duodenal ulcer and chronical pancreatitis and 75% of patients with colonopathy. The specify of diagnostic procedure was 80% in the first case and 100% in the second. Prevalence of digestive system diseases basic symptoms was studied too. The conclusion of the study demonstrated interactive questionnaire good ability in preliminary digestive problem patient examination procedure for individual diagnostic plan making.

Crew-integration and Automation Testbed (CAT)Program Overview and RUX06 Introduction

DTIC Science & Technology

2006-09-20

unlimited Crew-integration and Automation Testbed ( CAT ) Program Overview and RUX06 Introduction 26-27 July 2006 Patrick Nunez, Terry Tierney, Brian Novak...3. DATES COVERED 4. TITLE AND SUBTITLE Crew-integration and Automation Testbed ( CAT )Program Overview and RUX06 Introduction 5a. CONTRACT...Experiment • Capstone CAT experiment – Evaluate effectiveness of CAT program in improving the performance and/or reducing the workload for a mounted

System Operations Studies for Automated Guideway Transit Systems : Discrete Event Simulation Model Programmer's Manual

DOT National Transportation Integrated Search

1982-07-01

In order to examine specific automated guideway transit (AGT) developments and concepts, UMTA undertook a program of studies and technology investigations called Automated Guideway Transit Technology (AGTT) Program. The objectives of one segment of t...

Systems Operations Studies for Automated Guideway Transit Systems : System Availability Model Programmer's Manual

DOT National Transportation Integrated Search

1981-07-01

In order to examine specific automated guideway transit (AGT) developments and concepts, UMTA undertook a program of studies and technology investigations called Automated Guideway Transit Technology (AGTT) Program. The objectives of one segment of t...

Automatic Dynamic Aircraft Modeler (ADAM) for the Computer Program NASTRAN

NASA Technical Reports Server (NTRS)

Griffis, H.

1985-01-01

Large general purpose finite element programs require users to develop large quantities of input data. General purpose pre-processors are used to decrease the effort required to develop structural models. Further reduction of effort can be achieved by specific application pre-processors. Automatic Dynamic Aircraft Modeler (ADAM) is one such application specific pre-processor. General purpose pre-processors use points, lines and surfaces to describe geometric shapes. Specifying that ADAM is used only for aircraft structures allows generic structural sections, wing boxes and bodies, to be pre-defined. Hence with only gross dimensions, thicknesses, material properties and pre-defined boundary conditions a complete model of an aircraft can be created.

10 CFR 300.1 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CLIMATE CHANGE VOLUNTARY GREENHOUSE GAS REPORTING PROGRAM: GENERAL GUIDELINES § 300.1 General. (a) Purpose... under the Climate Leaders or Climate VISION programs to reduce its entity-wide emissions relative to a... (incorporated by reference, see § 300.13) and base its registered reductions on an assessment of annual changes...

10 CFR 300.1 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CLIMATE CHANGE VOLUNTARY GREENHOUSE GAS REPORTING PROGRAM: GENERAL GUIDELINES § 300.1 General. (a) Purpose... under the Climate Leaders or Climate VISION programs to reduce its entity-wide emissions relative to a... (incorporated by reference, see § 300.13) and base its registered reductions on an assessment of annual changes...

10 CFR 300.1 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CLIMATE CHANGE VOLUNTARY GREENHOUSE GAS REPORTING PROGRAM: GENERAL GUIDELINES § 300.1 General. (a) Purpose... under the Climate Leaders or Climate VISION programs to reduce its entity-wide emissions relative to a... (incorporated by reference, see § 300.13) and base its registered reductions on an assessment of annual changes...

10 CFR 300.1 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... CLIMATE CHANGE VOLUNTARY GREENHOUSE GAS REPORTING PROGRAM: GENERAL GUIDELINES § 300.1 General. (a) Purpose... under the Climate Leaders or Climate VISION programs to reduce its entity-wide emissions relative to a... (incorporated by reference, see § 300.13) and base its registered reductions on an assessment of annual changes...

10 CFR 300.1 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... CLIMATE CHANGE VOLUNTARY GREENHOUSE GAS REPORTING PROGRAM: GENERAL GUIDELINES § 300.1 General. (a) Purpose... under the Climate Leaders or Climate VISION programs to reduce its entity-wide emissions relative to a... (incorporated by reference, see § 300.13) and base its registered reductions on an assessment of annual changes...

SeqFIRE: a web application for automated extraction of indel regions and conserved blocks from protein multiple sequence alignments.

PubMed

Ajawatanawong, Pravech; Atkinson, Gemma C; Watson-Haigh, Nathan S; Mackenzie, Bryony; Baldauf, Sandra L

2012-07-01

Analyses of multiple sequence alignments generally focus on well-defined conserved sequence blocks, while the rest of the alignment is largely ignored or discarded. This is especially true in phylogenomics, where large multigene datasets are produced through automated pipelines. However, some of the most powerful phylogenetic markers have been found in the variable length regions of multiple alignments, particularly insertions/deletions (indels) in protein sequences. We have developed Sequence Feature and Indel Region Extractor (SeqFIRE) to enable the automated identification and extraction of indels from protein sequence alignments. The program can also extract conserved blocks and identify fast evolving sites using a combination of conservation and entropy. All major variables can be adjusted by the user, allowing them to identify the sets of variables most suited to a particular analysis or dataset. Thus, all major tasks in preparing an alignment for further analysis are combined in a single flexible and user-friendly program. The output includes a numbered list of indels, alignments in NEXUS format with indels annotated or removed and indel-only matrices. SeqFIRE is a user-friendly web application, freely available online at www.seqfire.org/.

Rapid access to compound libraries through flow technology: fully automated synthesis of a 3-aminoindolizine library via orthogonal diversification.

PubMed

Lange, Paul P; James, Keith

2012-10-08

A novel methodology for the synthesis of druglike heterocycle libraries has been developed through the use of flow reactor technology. The strategy employs orthogonal modification of a heterocyclic core, which is generated in situ, and was used to construct both a 25-membered library of druglike 3-aminoindolizines, and selected examples of a 100-member virtual library. This general protocol allows a broad range of acylation, alkylation and sulfonamidation reactions to be performed in conjunction with a tandem Sonogashira coupling/cycloisomerization sequence. All three synthetic steps were conducted under full automation in the flow reactor, with no handling or isolation of intermediates, to afford the desired products in good yields. This fully automated, multistep flow approach opens the way to highly efficient generation of druglike heterocyclic systems as part of a lead discovery strategy or within a lead optimization program.

TreeRipper web application: towards a fully automated optical tree recognition software.

PubMed

Hughes, Joseph

2011-05-20

Relationships between species, genes and genomes have been printed as trees for over a century. Whilst this may have been the best format for exchanging and sharing phylogenetic hypotheses during the 20th century, the worldwide web now provides faster and automated ways of transferring and sharing phylogenetic knowledge. However, novel software is needed to defrost these published phylogenies for the 21st century. TreeRipper is a simple website for the fully-automated recognition of multifurcating phylogenetic trees (http://linnaeus.zoology.gla.ac.uk/~jhughes/treeripper/). The program accepts a range of input image formats (PNG, JPG/JPEG or GIF). The underlying command line c++ program follows a number of cleaning steps to detect lines, remove node labels, patch-up broken lines and corners and detect line edges. The edge contour is then determined to detect the branch length, tip label positions and the topology of the tree. Optical Character Recognition (OCR) is used to convert the tip labels into text with the freely available tesseract-ocr software. 32% of images meeting the prerequisites for TreeRipper were successfully recognised, the largest tree had 115 leaves. Despite the diversity of ways phylogenies have been illustrated making the design of a fully automated tree recognition software difficult, TreeRipper is a step towards automating the digitization of past phylogenies. We also provide a dataset of 100 tree images and associated tree files for training and/or benchmarking future software. TreeRipper is an open source project licensed under the GNU General Public Licence v3.

How Do Mobile Phone Diabetes Programs Drive Behavior Change?

PubMed Central

Nundy, Shantanu; Mishra, Anjuli; Hogan, Patrick; Lee, Sang Mee; Solomon, Marla C.; Peek, Monica E.

2015-01-01

Purpose The purpose of this study was to investigate the behavioral effects of a theory-driven, mobile phone–based intervention that combines automated text messaging and remote nursing, using an automated, interactive text messaging system. Methods This was a mixed methods observational cohort study. Study participants were members of the University of Chicago Health Plan (UCHP) who largely reside in a working-class, urban African American community. Surveys were conducted at baseline, 3 months (mid-intervention), and 6 months (postintervention) to test the hypothesis that the intervention would be associated with improvements in self-efficacy, social support, health beliefs, and self-care. In addition, in-depth individual interviews were conducted with 14 participants and then analyzed using the constant comparative method to identify new behavioral constructs affected by the intervention. Results The intervention was associated with improvements in 5 of 6 domains of self-care (medication taking, glucose monitoring, foot care, exercise, and healthy eating) and improvements in 1 or more measures of self-efficacy, social support, and health beliefs (perceived control). Qualitatively, participants reported that knowledge, attitudes, and ownership were also affected by the program. Together these findings were used to construct a new behavioral model. Conclusions This study’s findings challenge the prevailing assumption that mobile phones largely affect behavior change through reminders and support the idea that behaviorally driven mobile health interventions can address multiple behavioral pathways associated with sustained behavior change. PMID:25278512

32 CFR 324.1 - Issuance and purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Program only to establish policy for the Defense Finance and Accounting Service (DFAS) and provide DFAS... PROGRAM DFAS PRIVACY ACT PROGRAM General information § 324.1 Issuance and purpose. The Defense Finance and Accounting Service fully implements the policy and procedures of the Privacy Act and the DoD 5400.11-R 1...

Aviation Safety/Automation Program Conference

NASA Technical Reports Server (NTRS)

Morello, Samuel A. (Compiler)

1990-01-01

The Aviation Safety/Automation Program Conference - 1989 was sponsored by the NASA Langley Research Center on 11 to 12 October 1989. The conference, held at the Sheraton Beach Inn and Conference Center, Virginia Beach, Virginia, was chaired by Samuel A. Morello. The primary objective of the conference was to ensure effective communication and technology transfer by providing a forum for technical interchange of current operational problems and program results to date. The Aviation Safety/Automation Program has as its primary goal to improve the safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers.

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation. Appendix A: ROBSIM user's guide

NASA Technical Reports Server (NTRS)

Haley, D. C.; Almand, B. J.; Thomas, M. M.; Krauze, L. D.; Gremban, K. D.; Sanborn, J. C.; Kelley, J. H.; Depkovich, T. M.; Wolfe, W. J.; Nguyen, T.

1986-01-01

The purpose of the Robotics Simulation Program is to provide a broad range of computer capabilities to assist in the design, verification, simulation, and study of robotics systems. ROBSIM is program in FORTRAN 77 for use on a VAX 11/750 computer under the VMS operating system. This user's guide describes the capabilities of the ROBSIM programs, including the system definition function, the analysis tools function and the postprocessor function. The options a user may encounter with each of these executables are explained in detail and the different program prompts appearing to the user are included. Some useful suggestions concerning the appropriate answers to be given by the user are provided. An example user interactive run in enclosed for each of the main program services, and some of the capabilities are illustrated.

Using Rose and Compass for Authentication

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, G

2009-07-09

Many recent non-proliferation software projects include a software authentication component. In this context, 'authentication' is defined as determining that a software package performs only its intended purpose and performs that purpose correctly and reliably over many years. In addition to visual inspection by knowledgeable computer scientists, automated tools are needed to highlight suspicious code constructs both to aid the visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary, and have limited extensibility. An open-source, extensible tool can be customized to the unique needs of each project. ROSEmore » is an LLNL-developed robust source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C, C++, and FORTRAN. It continues to be extended to support the automated analysis of binaries (x86, ARM, and PowerPC). We continue to extend ROSE to address a number of security specific requirements and apply it to software authentication for non-proliferation projects. We will give an update on the status of our work.« less

Automated Reasoning CICT Program/Intelligent Systems Project ATAC-PRT Review

NASA Technical Reports Server (NTRS)

Morris, Robert; Smith, Ben

2003-01-01

An overview is presented of the Automated Reasoning CICT Program/Intelligent Systems project. Automated reasoning technology will help NASA missions by increasing the amount of science achieved, ensuring safety of spacecraft and surface explorers, and by enabling more robust mission operations.

NASA Systems Autonomy Demonstration Program - A step toward Space Station automation

NASA Technical Reports Server (NTRS)

Starks, S. A.; Rundus, D.; Erickson, W. K.; Healey, K. J.

1987-01-01

This paper addresses a multiyear NASA program, the Systems Autonomy Demonstration Program (SADP), whose main objectives include the development, integration, and demonstration of automation technology in Space Station flight and ground support systems. The role of automation in the Space Station is reviewed, and the main players in SADP and their roles are described. The core research and technology being promoted by SADP are discussed, and a planned 1988 milestone demonstration of the automated monitoring, operation, and control of a complete mission operations subsystem is addressed.

Automated Array Assembly, Phase 2

NASA Technical Reports Server (NTRS)

Daiello, R. V.

1978-01-01

The purpose of the overall program is to establish technological readiness and provide verification for the elements of a manufacturing sequence which would ultimately be suitable for the large-scale production of silicon solar-array modules at a selling price of less than $500/kW. A program and process plan for accomplishing this objective was developed and put into operation. Three junction-formation processes are shown; since cost analysis shows that they do not differ greatly in cost, each should be considered for technical merits and possible future cost reduction. The progress made in the various process steps of the plan is described, and conclusions are presented.

Automating linear accelerator quality assurance.

PubMed

Eckhause, Tobias; Al-Hallaq, Hania; Ritter, Timothy; DeMarco, John; Farrey, Karl; Pawlicki, Todd; Kim, Gwe-Ya; Popple, Richard; Sharma, Vijeshwar; Perez, Mario; Park, SungYong; Booth, Jeremy T; Thorwarth, Ryan; Moran, Jean M

2015-10-01

The purpose of this study was 2-fold. One purpose was to develop an automated, streamlined quality assurance (QA) program for use by multiple centers. The second purpose was to evaluate machine performance over time for multiple centers using linear accelerator (Linac) log files and electronic portal images. The authors sought to evaluate variations in Linac performance to establish as a reference for other centers. The authors developed analytical software tools for a QA program using both log files and electronic portal imaging device (EPID) measurements. The first tool is a general analysis tool which can read and visually represent data in the log file. This tool, which can be used to automatically analyze patient treatment or QA log files, examines the files for Linac deviations which exceed thresholds. The second set of tools consists of a test suite of QA fields, a standard phantom, and software to collect information from the log files on deviations from the expected values. The test suite was designed to focus on the mechanical tests of the Linac to include jaw, MLC, and collimator positions during static, IMRT, and volumetric modulated arc therapy delivery. A consortium of eight institutions delivered the test suite at monthly or weekly intervals on each Linac using a standard phantom. The behavior of various components was analyzed for eight TrueBeam Linacs. For the EPID and trajectory log file analysis, all observed deviations which exceeded established thresholds for Linac behavior resulted in a beam hold off. In the absence of an interlock-triggering event, the maximum observed log file deviations between the expected and actual component positions (such as MLC leaves) varied from less than 1% to 26% of published tolerance thresholds. The maximum and standard deviations of the variations due to gantry sag, collimator angle, jaw position, and MLC positions are presented. Gantry sag among Linacs was 0.336 ± 0.072 mm. The standard deviation in MLC position, as determined by EPID measurements, across the consortium was 0.33 mm for IMRT fields. With respect to the log files, the deviations between expected and actual positions for parameters were small (<0.12 mm) for all Linacs. Considering both log files and EPID measurements, all parameters were well within published tolerance values. Variations in collimator angle, MLC position, and gantry sag were also evaluated for all Linacs. The performance of the TrueBeam Linac model was shown to be consistent based on automated analysis of trajectory log files and EPID images acquired during delivery of a standardized test suite. The results can be compared directly to tolerance thresholds. In addition, sharing of results from standard tests across institutions can facilitate the identification of QA process and Linac changes. These reference values are presented along with the standard deviation for common tests so that the test suite can be used by other centers to evaluate their Linac performance against those in this consortium.

An Automated Medical Information Management System (OpScan-MIMS) in a Clinical Setting

PubMed Central

Margolis, S.; Baker, T.G.; Ritchey, M.G.; Alterescu, S.; Friedman, C.

1981-01-01

This paper describes an automated medical information management system within a clinic setting. The system includes an optically scanned data entry system (OpScan), a generalized, interactive retrieval and storage software system(Medical Information Management System, MIMS) and the use of time-sharing. The system has the advantages of minimal hardware purchase and maintenance, rapid data entry and retrieval, user-created programs, no need for user knowledge of computer language or technology and is cost effective. The OpScan-MIMS system has been operational for approximately 16 months in a sexually transmitted disease clinic. The system's application to medical audit, quality assurance, clinic management and clinical training are demonstrated.

Automated extraction of knowledge for model-based diagnostics

NASA Technical Reports Server (NTRS)

Gonzalez, Avelino J.; Myler, Harley R.; Towhidnejad, Massood; Mckenzie, Frederic D.; Kladke, Robin R.

1990-01-01

The concept of accessing computer aided design (CAD) design databases and extracting a process model automatically is investigated as a possible source for the generation of knowledge bases for model-based reasoning systems. The resulting system, referred to as automated knowledge generation (AKG), uses an object-oriented programming structure and constraint techniques as well as internal database of component descriptions to generate a frame-based structure that describes the model. The procedure has been designed to be general enough to be easily coupled to CAD systems that feature a database capable of providing label and connectivity data from the drawn system. The AKG system is capable of defining knowledge bases in formats required by various model-based reasoning tools.

Interfacing a General Purpose Fluid Network Flow Program with the SINDA/G Thermal Analysis Program

NASA Technical Reports Server (NTRS)

Schallhorn, Paul; Popok, Daniel

1999-01-01

A general purpose, one dimensional fluid flow code is currently being interfaced with the thermal analysis program Systems Improved Numerical Differencing Analyzer/Gaski (SINDA/G). The flow code, Generalized Fluid System Simulation Program (GFSSP), is capable of analyzing steady state and transient flow in a complex network. The flow code is capable of modeling several physical phenomena including compressibility effects, phase changes, body forces (such as gravity and centrifugal) and mixture thermodynamics for multiple species. The addition of GFSSP to SINDA/G provides a significant improvement in convective heat transfer modeling for SINDA/G. The interface development is conducted in multiple phases. This paper describes the first phase of the interface which allows for steady and quasi-steady (unsteady solid, steady fluid) conjugate heat transfer modeling.

Sudden cardiac arrest in schools: the role of the school nurse in AED program implementation.

PubMed

Boudreaux, Sharon; Broussard, Lisa

2012-01-01

A school nurse has many obstacles to overcome when providing emergency care for an age group ranging from four to adulthood. The 21st century school nurse faces the challenges of providing care to medically fragile children at multiple sites, with high student-nurse ratios. The implementation of an Automated External Defibrillation (AED) program can assist the school nurse and staff in providing necessary life-saving services for Sudden Cardiac Arrest (SCA) victims of all ages. The purpose of this article is to describe AED program implementation in a school setting, including the need, essential elements, benefits, and potential concerns related to this vital component of the American Heart Association five-link chain of survival.

Automation and robotics for the National Space Program

NASA Technical Reports Server (NTRS)

1985-01-01

The emphasis on automation and robotics in the augmentation of the human centered systems as it concerns the space station is discussed. How automation and robotics can amplify the capabilities of humans is detailed. A detailed developmental program for the space station is outlined.

15 CFR 295.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Purpose. 295.1 Section 295.1 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General...

15 CFR 295.1 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Purpose. 295.1 Section 295.1 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General...

15 CFR 295.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Purpose. 295.1 Section 295.1 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General...

15 CFR 295.1 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Purpose. 295.1 Section 295.1 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General...

15 CFR 295.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Purpose. 295.1 Section 295.1 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General...

Dielectrophoresis-Based Sample Handling in General-Purpose Programmable Diagnostic Instruments

PubMed Central

Gascoyne, Peter R. C.; Vykoukal, Jody V.

2009-01-01

As the molecular origins of disease are better understood, the need for affordable, rapid, and automated technologies that enable microscale molecular diagnostics has become apparent. Widespread use of microsystems that perform sample preparation and molecular analysis could ensure that the benefits of new biomedical discoveries are realized by a maximum number of people, even those in environments lacking any infrastructure. While progress has been made in developing miniaturized diagnostic systems, samples are generally processed off-device using labor-intensive and time-consuming traditional sample preparation methods. We present the concept of an integrated programmable general-purpose sample analysis processor (GSAP) architecture where raw samples are routed to separation and analysis functional blocks contained within a single device. Several dielectrophoresis-based methods that could serve as the foundation for building GSAP functional blocks are reviewed including methods for cell and particle sorting, cell focusing, cell ac impedance analysis, cell lysis, and the manipulation of molecules and reagent droplets. PMID:19684877

34 CFR 673.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... OF EDUCATION GENERAL PROVISIONS FOR THE FEDERAL PERKINS LOAN PROGRAM, FEDERAL WORK-STUDY PROGRAM, AND... amended (HEA) that participating institutions administer: (a) The Federal Perkins Loan Program, which...

34 CFR 673.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OF EDUCATION GENERAL PROVISIONS FOR THE FEDERAL PERKINS LOAN PROGRAM, FEDERAL WORK-STUDY PROGRAM, AND... amended (HEA) that participating institutions administer: (a) The Federal Perkins Loan Program, which...

Generalized Symbolic Execution for Model Checking and Testing

NASA Technical Reports Server (NTRS)

Khurshid, Sarfraz; Pasareanu, Corina; Visser, Willem; Kofmeyer, David (Technical Monitor)

2003-01-01

Modern software systems, which often are concurrent and manipulate complex data structures must be extremely reliable. We present a novel framework based on symbolic execution, for automated checking of such systems. We provide a two-fold generalization of traditional symbolic execution based approaches: one, we define a program instrumentation, which enables standard model checkers to perform symbolic execution; two, we give a novel symbolic execution algorithm that handles dynamically allocated structures (e.g., lists and trees), method preconditions (e.g., acyclicity of lists), data (e.g., integers and strings) and concurrency. The program instrumentation enables a model checker to automatically explore program heap configurations (using a systematic treatment of aliasing) and manipulate logical formulae on program data values (using a decision procedure). We illustrate two applications of our framework: checking correctness of multi-threaded programs that take inputs from unbounded domains with complex structure and generation of non-isomorphic test inputs that satisfy a testing criterion. Our implementation for Java uses the Java PathFinder model checker.

Plans and Activities for 1990 Decennial Census: Part I. Hearing before the Subcommittee on Census and Population of the Committee on Post Office and Civil Service. House of Representatives. Ninety-Ninth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U. S., Washington, DC. House Committee on Post Office and Civil Service.

This hearing, which is the first of a series of hearings on the 1990 decennial census, focuses on automation activities, pretest preparations, and proposed residency rules. Gene L. Dodaro, associate director of the General Accounting Office, calls on the committee to use special purpose tests to adequately evaluate the following: (1) potential of…

SIG -- The Role of Human-Computer Interaction in Next-Generation Control Rooms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald L. Boring; Jacques Hugo; Christian Richard

2005-04-01

The purpose of this CHI Special Interest Group (SIG) is to facilitate the convergence between human-computer interaction (HCI) and control room design. HCI researchers and practitioners actively need to infuse state-of-the-art interface technology into control rooms to meet usability, safety, and regulatory requirements. This SIG outlines potential HCI contributions to instrumentation and control (I&C) and automation in control rooms as well as to general control room design.

Client - server programs analysis in the EPOCA environment

NASA Astrophysics Data System (ADS)

Donatelli, Susanna; Mazzocca, Nicola; Russo, Stefano

1996-09-01

Client - server processing is a popular paradigm for distributed computing. In the development of client - server programs, the designer has first to ensure that the implementation behaves correctly, in particular that it is deadlock free. Second, he has to guarantee that the program meets predefined performance requirements. This paper addresses the issues in the analysis of client - server programs in EPOCA. EPOCA is a computer-aided software engeneering (CASE) support system that allows the automated construction and analysis of generalized stochastic Petri net (GSPN) models of concurrent applications. The paper describes, on the basis of a realistic case study, how client - server systems are modelled in EPOCA, and the kind of qualitative and quantitative analysis supported by its tools.

20 CFR 402.175 - Fees for providing information and related services for non-program purposes.

Code of Federal Regulations, 2011 CFR

2011-04-01

... related services for non-program purposes. (a) General. Section 1106(c) of the Social Security Act permits... (including costs of duplication) of providing information and related services under section 1106(c) of the... described in paragraph (c) of this section. (c) Fee schedule. Our fee schedule for non-program related...

Automated Analysis of Child Phonetic Production Using Naturalistic Recordings

ERIC Educational Resources Information Center

Xu, Dongxin; Richards, Jeffrey A.; Gilkerson, Jill

2014-01-01

Purpose: Conventional resource-intensive methods for child phonetic development studies are often impractical for sampling and analyzing child vocalizations in sufficient quantity. The purpose of this study was to provide new information on early language development by an automated analysis of child phonetic production using naturalistic…

46 CFR 520.1 - Scope and purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... automated systems by common carriers and conferences in the waterborne foreign commerce of the United States... 46 Shipping 9 2010-10-01 2010-10-01 false Scope and purpose. 520.1 Section 520.1 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN SHIPPING IN FOREIGN COMMERCE CARRIER AUTOMATED TARIFFS...

Space biology initiative program definition review. Trade study 1: Automation costs versus crew utilization

NASA Technical Reports Server (NTRS)

Jackson, L. Neal; Crenshaw, John, Sr.; Hambright, R. N.; Nedungadi, A.; Mcfayden, G. M.; Tsuchida, M. S.

1989-01-01

A significant emphasis upon automation within the Space Biology Initiative hardware appears justified in order to conserve crew labor and crew training effort. Two generic forms of automation were identified: automation of data and information handling and decision making, and the automation of material handling, transfer, and processing. The use of automatic data acquisition, expert systems, robots, and machine vision will increase the volume of experiments and quality of results. The automation described may also influence efforts to miniaturize and modularize the large array of SBI hardware identified to date. The cost and benefit model developed appears to be a useful guideline for SBI equipment specifiers and designers. Additional refinements would enhance the validity of the model. Two NASA automation pilot programs, 'The Principal Investigator in a Box' and 'Rack Mounted Robots' were investigated and found to be quite appropriate for adaptation to the SBI program. There are other in-house NASA efforts that provide technology that may be appropriate for the SBI program. Important data is believed to exist in advanced medical labs throughout the U.S., Japan, and Europe. The information and data processing in medical analysis equipment is highly automated and future trends reveal continued progress in this area. However, automation of material handling and processing has progressed in a limited manner because the medical labs are not affected by the power and space constraints that Space Station medical equipment is faced with. Therefore, NASA's major emphasis in automation will require a lead effort in the automation of material handling to achieve optimal crew utilization.

Program for improved electrical harness documentation and fabrication

NASA Technical Reports Server (NTRS)

1971-01-01

Computer program provides automated print-out of harness interconnection table and automated cross-check of reciprocal pin/connector assignments, and improves accuracy and reliability of final documented data. Programs and corresponding library tapes are successfully and continuously employed on Nimbus spacecraft programs.

Prospective, observational study comparing automated and visual point-of-care urinalysis in general practice

PubMed Central

van Delft, Sanne; Goedhart, Annelijn; Spigt, Mark; van Pinxteren, Bart; de Wit, Niek; Hopstaken, Rogier

2016-01-01

Objective Point-of-care testing (POCT) urinalysis might reduce errors in (subjective) reading, registration and communication of test results, and might also improve diagnostic outcome and optimise patient management. Evidence is lacking. In the present study, we have studied the analytical performance of automated urinalysis and visual urinalysis compared with a reference standard in routine general practice. Setting The study was performed in six general practitioner (GP) group practices in the Netherlands. Automated urinalysis was compared with visual urinalysis in these practices. Reference testing was performed in a primary care laboratory (Saltro, Utrecht, The Netherlands). Primary and secondary outcome measures Analytical performance of automated and visual urinalysis compared with the reference laboratory method was the primary outcome measure, analysed by calculating sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) and Cohen's κ coefficient for agreement. Secondary outcome measure was the user-friendliness of the POCT analyser. Results Automated urinalysis by experienced and routinely trained practice assistants in general practice performs as good as visual urinalysis for nitrite, leucocytes and erythrocytes. Agreement for nitrite is high for automated and visual urinalysis. κ's are 0.824 and 0.803 (ranked as very good and good, respectively). Agreement with the central laboratory reference standard for automated and visual urinalysis for leucocytes is rather poor (0.256 for POCT and 0.197 for visual, respectively, ranked as fair and poor). κ's for erythrocytes are higher: 0.517 (automated) and 0.416 (visual), both ranked as moderate. The Urisys 1100 analyser was easy to use and considered to be not prone to flaws. Conclusions Automated urinalysis performed as good as traditional visual urinalysis on reading of nitrite, leucocytes and erythrocytes in routine general practice. Implementation of automated urinalysis in general practice is justified as automation is expected to reduce human errors in patient identification and transcribing of results. PMID:27503860

Prospective, observational study comparing automated and visual point-of-care urinalysis in general practice.

PubMed

van Delft, Sanne; Goedhart, Annelijn; Spigt, Mark; van Pinxteren, Bart; de Wit, Niek; Hopstaken, Rogier

2016-08-08

Point-of-care testing (POCT) urinalysis might reduce errors in (subjective) reading, registration and communication of test results, and might also improve diagnostic outcome and optimise patient management. Evidence is lacking. In the present study, we have studied the analytical performance of automated urinalysis and visual urinalysis compared with a reference standard in routine general practice. The study was performed in six general practitioner (GP) group practices in the Netherlands. Automated urinalysis was compared with visual urinalysis in these practices. Reference testing was performed in a primary care laboratory (Saltro, Utrecht, The Netherlands). Analytical performance of automated and visual urinalysis compared with the reference laboratory method was the primary outcome measure, analysed by calculating sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) and Cohen's κ coefficient for agreement. Secondary outcome measure was the user-friendliness of the POCT analyser. Automated urinalysis by experienced and routinely trained practice assistants in general practice performs as good as visual urinalysis for nitrite, leucocytes and erythrocytes. Agreement for nitrite is high for automated and visual urinalysis. κ's are 0.824 and 0.803 (ranked as very good and good, respectively). Agreement with the central laboratory reference standard for automated and visual urinalysis for leucocytes is rather poor (0.256 for POCT and 0.197 for visual, respectively, ranked as fair and poor). κ's for erythrocytes are higher: 0.517 (automated) and 0.416 (visual), both ranked as moderate. The Urisys 1100 analyser was easy to use and considered to be not prone to flaws. Automated urinalysis performed as good as traditional visual urinalysis on reading of nitrite, leucocytes and erythrocytes in routine general practice. Implementation of automated urinalysis in general practice is justified as automation is expected to reduce human errors in patient identification and transcribing of results. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

7 CFR 250.1 - General purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Supplemental Food Program, the Special Supplemental Nutrition Program for Women, Infants, and Children, the Food Distribution Programs on Indian Reservations and the assistance of needy persons. ...

Automating the Exchange of Military Personnel Data Among Selected Army Organizations. Volume II. Appendices,

DTIC Science & Technology

1981-06-30

manpower needs as to quantity, quality and timing; all the internal functions of the personnel service are tapped to help meet these ends. Manpower...Program ACOS - Automated Computation of Service ACQ - Acquisition ACSAC - Assistant Chief of Staff for Automation and Comunications ACT - Automated...ARSTAF - Army Staff ARSTAFF - Army Staff ARTEP - Army Training and Evaluation Program ASI - Additional Skill Identifier ASVAB - Armed Services

Routine human-competitive machine intelligence by means of genetic programming

NASA Astrophysics Data System (ADS)

Koza, John R.; Streeter, Matthew J.; Keane, Martin

2004-01-01

Genetic programming is a systematic method for getting computers to automatically solve a problem. Genetic programming starts from a high-level statement of what needs to be done and automatically creates a computer program to solve the problem. The paper demonstrates that genetic programming (1) now routinely delivers high-return human-competitive machine intelligence; (2) is an automated invention machine; (3) can automatically create a general solution to a problem in the form of a parameterized topology; and (4) has delivered a progression of qualitatively more substantial results in synchrony with five approximately order-of-magnitude increases in the expenditure of computer time. Recent results involving the automatic synthesis of the topology and sizing of analog electrical circuits and controllers demonstrate these points.

An automated testing tool for traffic signal controller functionalities.

DOT National Transportation Integrated Search

2010-03-01

The purpose of this project was to develop an automated tool that facilitates testing of traffic controller functionality using controller interface device (CID) technology. Benefits of such automated testers to traffic engineers include reduced test...

A bill to require Comptroller General of the United States reports on the major automated information system programs of the Department of Defense.

THOMAS, 112th Congress

Sen. Coburn, Tom [R-OK

2011-11-01

Senate - 11/01/2011 Read twice and referred to the Committee on Armed Services. (All Actions) Notes: For further action, see H.R.1540, which became Public Law 112-81 on 12/31/2011. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Incorporating energy conservation techniques in the operation of existing LeRC R and D facilities. [energy policy/NASA programs

NASA Technical Reports Server (NTRS)

Nieberding, W. C.

1975-01-01

A general discussion of various methods which can be used to reduce energy consumption is presented. A very brief description of Lewis Research Center facilities is given and the energy reduction methods are discussed relative to them. Some specific examples (ie; automated equipment and data systems) of the implementation of the energy reduction methods are included.

24 CFR 5.306 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... HUD PROGRAM REQUIREMENTS; WAIVERS Pet Ownership for the Elderly or Persons With Disabilities General Requirements § 5.306 Definitions. Common household pet means: (1) For purposes of Housing programs: A... traditionally kept in the home for pleasure rather than for commercial purposes. Common household pet does not...

24 CFR 5.306 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... HUD PROGRAM REQUIREMENTS; WAIVERS Pet Ownership for the Elderly or Persons With Disabilities General Requirements § 5.306 Definitions. Common household pet means: (1) For purposes of Housing programs: A... traditionally kept in the home for pleasure rather than for commercial purposes. Common household pet does not...

24 CFR 5.306 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... HUD PROGRAM REQUIREMENTS; WAIVERS Pet Ownership for the Elderly or Persons With Disabilities General Requirements § 5.306 Definitions. Common household pet means: (1) For purposes of Housing programs: A... traditionally kept in the home for pleasure rather than for commercial purposes. Common household pet does not...

30 CFR 401.1 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-07-01

... GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR STATE WATER RESEARCH INSTITUTE PROGRAM General § 401.1 Purpose. The regulations in this part are issued pursuant to title I of the Water Research Act of 1984 (Pub. L... the Interior to promote a national program of water-resources research. ...

30 CFR 401.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-07-01

... GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR STATE WATER RESEARCH INSTITUTE PROGRAM General § 401.1 Purpose. The regulations in this part are issued pursuant to title I of the Water Research Act of 1984 (Pub. L... the Interior to promote a national program of water-resources research. ...

30 CFR 401.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR STATE WATER RESEARCH INSTITUTE PROGRAM General § 401.1 Purpose. The regulations in this part are issued pursuant to title I of the Water Research Act of 1984 (Pub. L... the Interior to promote a national program of water-resources research. ...

30 CFR 401.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR STATE WATER RESEARCH INSTITUTE PROGRAM General § 401.1 Purpose. The regulations in this part are issued pursuant to title I of the Water Research Act of 1984 (Pub. L... the Interior to promote a national program of water-resources research. ...

30 CFR 401.1 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-07-01

... GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR STATE WATER RESEARCH INSTITUTE PROGRAM General § 401.1 Purpose. The regulations in this part are issued pursuant to title I of the Water Research Act of 1984 (Pub. L... the Interior to promote a national program of water-resources research. ...

34 CFR 691.7 - Institutional participation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... EDUCATION, DEPARTMENT OF EDUCATION ACADEMIC COMPETITIVENESS GRANT (ACG) AND NATIONAL SCIENCE AND MATHEMATICS ACCESS TO RETAIN TALENT GRANT (NATIONAL SMART GRANT) PROGRAMS Scope, Purpose, and General Definitions... defined in § 691.2(d), for purposes of the ACG Program, and that participates in the Federal Pell Grant...

SU-G-BRB-02: An Open-Source Software Analysis Library for Linear Accelerator Quality Assurance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerns, J; Yaldo, D

Purpose: Routine linac quality assurance (QA) tests have become complex enough to require automation of most test analyses. A new data analysis software library was built that allows physicists to automate routine linear accelerator quality assurance tests. The package is open source, code tested, and benchmarked. Methods: Images and data were generated on a TrueBeam linac for the following routine QA tests: VMAT, starshot, CBCT, machine logs, Winston Lutz, and picket fence. The analysis library was built using the general programming language Python. Each test was analyzed with the library algorithms and compared to manual measurements taken at the timemore » of acquisition. Results: VMAT QA results agreed within 0.1% between the library and manual measurements. Machine logs (dynalogs & trajectory logs) were successfully parsed; mechanical axis positions were verified for accuracy and MLC fluence agreed well with EPID measurements. CBCT QA measurements were within 10 HU and 0.2mm where applicable. Winston Lutz isocenter size measurements were within 0.2mm of TrueBeam’s Machine Performance Check. Starshot analysis was within 0.2mm of the Winston Lutz results for the same conditions. Picket fence images with and without a known error showed that the library was capable of detecting MLC offsets within 0.02mm. Conclusion: A new routine QA software library has been benchmarked and is available for use by the community. The library is open-source and extensible for use in larger systems.« less

EON: a component-based approach to automation of protocol-directed therapy.

PubMed Central

Musen, M A; Tu, S W; Das, A K; Shahar, Y

1996-01-01

Provision of automated support for planning protocol-directed therapy requires a computer program to take as input clinical data stored in an electronic patient-record system and to generate as output recommendations for therapeutic interventions and laboratory testing that are defined by applicable protocols. This paper presents a synthesis of research carried out at Stanford University to model the therapy-planning task and to demonstrate a component-based architecture for building protocol-based decision-support systems. We have constructed general-purpose software components that (1) interpret abstract protocol specifications to construct appropriate patient-specific treatment plans; (2) infer from time-stamped patient data higher-level, interval-based, abstract concepts; (3) perform time-oriented queries on a time-oriented patient database; and (4) allow acquisition and maintenance of protocol knowledge in a manner that facilitates efficient processing both by humans and by computers. We have implemented these components in a computer system known as EON. Each of the components has been developed, evaluated, and reported independently. We have evaluated the integration of the components as a composite architecture by implementing T-HELPER, a computer-based patient-record system that uses EON to offer advice regarding the management of patients who are following clinical trial protocols for AIDS or HIV infection. A test of the reuse of the software components in a different clinical domain demonstrated rapid development of a prototype application to support protocol-based care of patients who have breast cancer. PMID:8930854

Fully automated segmentation of left ventricle using dual dynamic programming in cardiac cine MR images

NASA Astrophysics Data System (ADS)

Jiang, Luan; Ling, Shan; Li, Qiang

2016-03-01

Cardiovascular diseases are becoming a leading cause of death all over the world. The cardiac function could be evaluated by global and regional parameters of left ventricle (LV) of the heart. The purpose of this study is to develop and evaluate a fully automated scheme for segmentation of LV in short axis cardiac cine MR images. Our fully automated method consists of three major steps, i.e., LV localization, LV segmentation at end-diastolic phase, and LV segmentation propagation to the other phases. First, the maximum intensity projection image along the time phases of the midventricular slice, located at the center of the image, was calculated to locate the region of interest of LV. Based on the mean intensity of the roughly segmented blood pool in the midventricular slice at each phase, end-diastolic (ED) and end-systolic (ES) phases were determined. Second, the endocardial and epicardial boundaries of LV of each slice at ED phase were synchronously delineated by use of a dual dynamic programming technique. The external costs of the endocardial and epicardial boundaries were defined with the gradient values obtained from the original and enhanced images, respectively. Finally, with the advantages of the continuity of the boundaries of LV across adjacent phases, we propagated the LV segmentation from the ED phase to the other phases by use of dual dynamic programming technique. The preliminary results on 9 clinical cardiac cine MR cases show that the proposed method can obtain accurate segmentation of LV based on subjective evaluation.

SU-E-T-502: Initial Results of a Comparison of Treatment Plans Produced From Automated Prioritized Planning Method and a Commercial Treatment Planning System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tiwari, P; Chen, Y; Hong, L

2015-06-15

Purpose We developed an automated treatment planning system based on a hierarchical goal programming approach. To demonstrate the feasibility of our method, we report the comparison of prostate treatment plans produced from the automated treatment planning system with those produced by a commercial treatment planning system. Methods In our approach, we prioritized the goals of the optimization, and solved one goal at a time. The purpose of prioritization is to ensure that higher priority dose-volume planning goals are not sacrificed to improve lower priority goals. The algorithm has four steps. The first step optimizes dose to the target structures, whilemore » sparing key sensitive organs from radiation. In the second step, the algorithm finds the best beamlet weight to reduce toxicity risks to normal tissue while holding the objective function achieved in the first step as a constraint, with a small amount of allowed slip. Likewise, the third and fourth steps introduce lower priority normal tissue goals and beam smoothing. We compared with prostate treatment plans from Memorial Sloan Kettering Cancer Center developed using Eclipse, with a prescription dose of 72 Gy. A combination of liear, quadratic, and gEUD objective functions were used with a modified open source solver code (IPOPT). Results Initial plan results on 3 different cases show that the automated planning system is capable of competing or improving on expert-driven eclipse plans. Compared to the Eclipse planning system, the automated system produced up to 26% less mean dose to rectum and 24% less mean dose to bladder while having the same D95 (after matching) to the target. Conclusion We have demonstrated that Pareto optimal treatment plans can be generated automatically without a trial-and-error process. The solver finds an optimal plan for the given patient, as opposed to database-driven approaches that set parameters based on geometry and population modeling.« less

Numerical analysis of stiffened shells of revolution. Volume 2: Users' manual for STAR-02S - shell theory automated for rotational structures - 2 (statics), digital computer program

NASA Technical Reports Server (NTRS)

Svalbonas, V.

1973-01-01

A procedure for the structural analysis of stiffened shells of revolution is presented. A digital computer program based on the Love-Reissner first order shell theory was developed. The computer program can analyze orthotropic thin shells of revolution, subjected to unsymmetric distributed loading or concentrated line loads, as well as thermal strains. The geometrical shapes of the shells which may be analyzed are described. The shell wall cross section can be a sheet, sandwich, or reinforced sheet or sandwich. General stiffness input options are also available.

AVID - A design system for technology studies of advanced transportation concepts. [Aerospace Vehicle Interactive Design

NASA Technical Reports Server (NTRS)

Wilhite, A. W.; Rehder, J. J.

1979-01-01

The basic AVID (Aerospace Vehicle Interactive Design) is a general system for conceptual and preliminary design currently being applied to a broad range of future space transportation and spacecraft vehicle concepts. AVID hardware includes a minicomputer allowing rapid designer interaction. AVID software includes (1) an executive program and communication data base which provide the automated capability to couple individual programs, either individually in an interactive mode or chained together in an automatic sequence mode; and (2) the individual technology and utility programs which provide analysis capability in areas such as graphics, aerodynamics, propulsion, flight performance, weights, sizing, and costs.

41 CFR 102-194.25 - What is an automated Standard or Optional format?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION ADMINISTRATIVE PROGRAMS 194-STANDARD AND OPTIONAL FORMS MANAGEMENT PROGRAM § 102-194.25 What is an automated Standard or... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What is an automated...

Process development for automated solar cell and module production. Task 4: Automated array assembly

NASA Technical Reports Server (NTRS)

Hagerty, J. J.

1981-01-01

Progress in the development of automated solar cell and module production is reported. The unimate robot is programmed for the final 35 cell pattern to be used in the fabrication of the deliverable modules. The mechanical construction of the automated lamination station and final assembly station phases are completed and the first operational testing is underway. The final controlling program is written and optimized. The glass reinforced concrete (GRC) panels to be used for testing and deliverables are in production. Test routines are grouped together and defined to produce the final control program.

Artificial Intelligence Techniques for Automatic Screening of Amblyogenic Factors

PubMed Central

Van Eenwyk, Jonathan; Agah, Arvin; Giangiacomo, Joseph; Cibis, Gerhard

2008-01-01

Purpose To develop a low-cost automated video system to effectively screen children aged 6 months to 6 years for amblyogenic factors. Methods In 1994 one of the authors (G.C.) described video vision development assessment, a digitizable analog video-based system combining Brückner pupil red reflex imaging and eccentric photorefraction to screen young children for amblyogenic factors. The images were analyzed manually with this system. We automated the capture of digital video frames and pupil images and applied computer vision and artificial intelligence to analyze and interpret results. The artificial intelligence systems were evaluated by a tenfold testing method. Results The best system was the decision tree learning approach, which had an accuracy of 77%, compared to the “gold standard” specialist examination with a “refer/do not refer” decision. Criteria for referral were strabismus, including microtropia, and refractive errors and anisometropia considered to be amblyogenic. Eighty-two percent of strabismic individuals were correctly identified. High refractive errors were also correctly identified and referred 90% of the time, as well as significant anisometropia. The program was less correct in identifying more moderate refractive errors, below +5 and less than −7. Conclusions Although we are pursuing a variety of avenues to improve the accuracy of the automated analysis, the program in its present form provides acceptable cost benefits for detecting ambylogenic factors in children aged 6 months to 6 years. PMID:19277222

NASA Systems Autonomy Demonstration Project - Development of Space Station automation technology

NASA Technical Reports Server (NTRS)

Bull, John S.; Brown, Richard; Friedland, Peter; Wong, Carla M.; Bates, William

1987-01-01

A 1984 Congressional expansion of the 1958 National Aeronautics and Space Act mandated that NASA conduct programs, as part of the Space Station program, which will yield the U.S. material benefits, particularly in the areas of advanced automation and robotics systems. Demonstration programs are scheduled for automated systems such as the thermal control, expert system coordination of Station subsystems, and automation of multiple subsystems. The programs focus the R&D efforts and provide a gateway for transfer of technology to industry. The NASA Office of Aeronautics and Space Technology is responsible for directing, funding and evaluating the Systems Autonomy Demonstration Project, which will include simulated interactions between novice personnel and astronauts and several automated, expert subsystems to explore the effectiveness of the man-machine interface being developed. Features and progress on the TEXSYS prototype thermal control system expert system are outlined.

Automating Formative and Summative Feedback for Individualised Assignments

ERIC Educational Resources Information Center

Hamilton, Ian Robert

2009-01-01

Purpose: The purpose of this paper is to report on the rationale behind the use of a unique paper-based individualised accounting assignment, which automated the provision to students of immediate formative and timely summative feedback. Design/methodology/approach: As students worked towards completing their assignment, the package provided…

AUTOMATION--SOME CLASSIFICATION AND MEASUREMENT PROBLEMS. REPRINT NO. 149.

ERIC Educational Resources Information Center

SULTAN, P.E.; PRASOW, P.

THE PURPOSE OF THIS PAPER WAS TO REVIEW HOW "AUTOMATION" IS DEFINED, GIVING CONSIDERATION TO CONVENTIONAL USAGE OF THE TERM AND TO THOSE CONSIDERATIONS WHICH DETERMINE THE CONVENIENCE OR SUITABILITY FOR RESEARCH PURPOSES OF PARTICULAR CATEGORIES OF TECHNICAL CHANGE. AN UNDERLYING ASSUMPTION IS THAT THE ADJUSTMENT DEMANDS IMPOSED BY TECHNOLOGY…

22 CFR 120.30 - The Automated Export System (AES).

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false The Automated Export System (AES). 120.30 Section 120.30 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.30 The Automated Export System (AES). The Automated Export System (AES) is the Department of...

22 CFR 120.30 - The Automated Export System (AES).

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false The Automated Export System (AES). 120.30 Section 120.30 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.30 The Automated Export System (AES). The Automated Export System (AES) is the Department of...

22 CFR 120.30 - The Automated Export System (AES).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false The Automated Export System (AES). 120.30 Section 120.30 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.30 The Automated Export System (AES). The Automated Export System (AES) is the Department of...

22 CFR 120.30 - The Automated Export System (AES).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false The Automated Export System (AES). 120.30 Section 120.30 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.30 The Automated Export System (AES). The Automated Export System (AES) is the Department of...

19 CFR 201.101 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Purpose. 201.101 Section 201.101 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

19 CFR 201.101 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Purpose. 201.101 Section 201.101 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

19 CFR 201.101 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Purpose. 201.101 Section 201.101 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

19 CFR 201.101 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Purpose. 201.101 Section 201.101 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

19 CFR 201.101 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Purpose. 201.101 Section 201.101 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

24 CFR 5.300 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Purpose. 5.300 Section 5.300 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development GENERAL HUD PROGRAM REQUIREMENTS; WAIVERS Pet Ownership for the Elderly or Persons With Disabilities General...

24 CFR 5.300 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Purpose. 5.300 Section 5.300 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development GENERAL HUD PROGRAM REQUIREMENTS; WAIVERS Pet Ownership for the Elderly or Persons With Disabilities General...

24 CFR 5.300 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Purpose. 5.300 Section 5.300 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development GENERAL HUD PROGRAM REQUIREMENTS; WAIVERS Pet Ownership for the Elderly or Persons With Disabilities General...

24 CFR 5.300 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Purpose. 5.300 Section 5.300 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development GENERAL HUD PROGRAM REQUIREMENTS; WAIVERS Pet Ownership for the Elderly or Persons With Disabilities General...

24 CFR 5.300 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Purpose. 5.300 Section 5.300 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development GENERAL HUD PROGRAM REQUIREMENTS; WAIVERS Pet Ownership for the Elderly or Persons With Disabilities General...

The NASA automation and robotics technology program

NASA Technical Reports Server (NTRS)

Holcomb, Lee B.; Montemerlo, Melvin D.

1986-01-01

The development and objectives of the NASA automation and robotics technology program are reviewed. The objectives of the program are to utilize AI and robotics to increase the probability of mission success; decrease the cost of ground control; and increase the capability and flexibility of space operations. There is a need for real-time computational capability; an effective man-machine interface; and techniques to validate automated systems. Current programs in the areas of sensing and perception, task planning and reasoning, control execution, operator interface, and system architecture and integration are described. Programs aimed at demonstrating the capabilities of telerobotics and system autonomy are discussed.

Quality-assurance study of the special - purpose finite-element program - SPECTROM: I. Thermal, thermoelastic, and viscoelastic problems. [Comparison with MARC-CDC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, R.A.

1980-12-01

This comparison study involves a preliminary verification of finite element calculations. The methodology of the comparison study consists of solving four example problems with both the SPECTROM finite element program and the MARC-CDC general purpose finite element program. The results show close agreement for all example problems.

Measuring disorganized speech in schizophrenia: automated analysis explains variance in cognitive deficits beyond clinician-rated scales.

PubMed

Minor, K S; Willits, J A; Marggraf, M P; Jones, M N; Lysaker, P H

2018-04-25

Conveying information cohesively is an essential element of communication that is disrupted in schizophrenia. These disruptions are typically expressed through disorganized symptoms, which have been linked to neurocognitive, social cognitive, and metacognitive deficits. Automated analysis can objectively assess disorganization within sentences, between sentences, and across paragraphs by comparing explicit communication to a large text corpus. Little work in schizophrenia has tested: (1) links between disorganized symptoms measured via automated analysis and neurocognition, social cognition, or metacognition; and (2) if automated analysis explains incremental variance in cognitive processes beyond clinician-rated scales. Disorganization was measured in schizophrenia (n = 81) with Coh-Metrix 3.0, an automated program that calculates basic and complex language indices. Trained staff also assessed neurocognition, social cognition, metacognition, and clinician-rated disorganization. Findings showed that all three cognitive processes were significantly associated with at least one automated index of disorganization. When automated analysis was compared with a clinician-rated scale, it accounted for significant variance in neurocognition and metacognition beyond the clinician-rated measure. When combined, these two methods explained 28-31% of the variance in neurocognition, social cognition, and metacognition. This study illustrated how automated analysis can highlight the specific role of disorganization in neurocognition, social cognition, and metacognition. Generally, those with poor cognition also displayed more disorganization in their speech-making it difficult for listeners to process essential information needed to tie the speaker's ideas together. Our findings showcase how implementing a mixed-methods approach in schizophrenia can explain substantial variance in cognitive processes.

Automated Monitoring of Pipeline Rights-of-Way

NASA Technical Reports Server (NTRS)

Frost, Chard Ritchie

2010-01-01

NASA Ames Research Center and the Pipeline Research Council International, Inc. have partnered in the formation of a research program to identify and develop the key technologies required to enable automated detection of threats to gas and oil transmission and distribution pipelines. This presentation describes the Right-of-way Automated Monitoring (RAM) program and highlights research successes to date, continuing challenges to implementing the RAM objectives, and the program's ongoing work and plans.

Savant Genome Browser 2: visualization and analysis for population-scale genomics.

PubMed

Fiume, Marc; Smith, Eric J M; Brook, Andrew; Strbenac, Dario; Turner, Brian; Mezlini, Aziz M; Robinson, Mark D; Wodak, Shoshana J; Brudno, Michael

2012-07-01

High-throughput sequencing (HTS) technologies are providing an unprecedented capacity for data generation, and there is a corresponding need for efficient data exploration and analysis capabilities. Although most existing tools for HTS data analysis are developed for either automated (e.g. genotyping) or visualization (e.g. genome browsing) purposes, such tools are most powerful when combined. For example, integration of visualization and computation allows users to iteratively refine their analyses by updating computational parameters within the visual framework in real-time. Here we introduce the second version of the Savant Genome Browser, a standalone program for visual and computational analysis of HTS data. Savant substantially improves upon its predecessor and existing tools by introducing innovative visualization modes and navigation interfaces for several genomic datatypes, and synergizing visual and automated analyses in a way that is powerful yet easy even for non-expert users. We also present a number of plugins that were developed by the Savant Community, which demonstrate the power of integrating visual and automated analyses using Savant. The Savant Genome Browser is freely available (open source) at www.savantbrowser.com.

Savant Genome Browser 2: visualization and analysis for population-scale genomics

PubMed Central

Smith, Eric J. M.; Brook, Andrew; Strbenac, Dario; Turner, Brian; Mezlini, Aziz M.; Robinson, Mark D.; Wodak, Shoshana J.; Brudno, Michael

2012-01-01

High-throughput sequencing (HTS) technologies are providing an unprecedented capacity for data generation, and there is a corresponding need for efficient data exploration and analysis capabilities. Although most existing tools for HTS data analysis are developed for either automated (e.g. genotyping) or visualization (e.g. genome browsing) purposes, such tools are most powerful when combined. For example, integration of visualization and computation allows users to iteratively refine their analyses by updating computational parameters within the visual framework in real-time. Here we introduce the second version of the Savant Genome Browser, a standalone program for visual and computational analysis of HTS data. Savant substantially improves upon its predecessor and existing tools by introducing innovative visualization modes and navigation interfaces for several genomic datatypes, and synergizing visual and automated analyses in a way that is powerful yet easy even for non-expert users. We also present a number of plugins that were developed by the Savant Community, which demonstrate the power of integrating visual and automated analyses using Savant. The Savant Genome Browser is freely available (open source) at www.savantbrowser.com. PMID:22638571

Automated image alignment for 2D gel electrophoresis in a high-throughput proteomics pipeline.

PubMed

Dowsey, Andrew W; Dunn, Michael J; Yang, Guang-Zhong

2008-04-01

The quest for high-throughput proteomics has revealed a number of challenges in recent years. Whilst substantial improvements in automated protein separation with liquid chromatography and mass spectrometry (LC/MS), aka 'shotgun' proteomics, have been achieved, large-scale open initiatives such as the Human Proteome Organization (HUPO) Brain Proteome Project have shown that maximal proteome coverage is only possible when LC/MS is complemented by 2D gel electrophoresis (2-DE) studies. Moreover, both separation methods require automated alignment and differential analysis to relieve the bioinformatics bottleneck and so make high-throughput protein biomarker discovery a reality. The purpose of this article is to describe a fully automatic image alignment framework for the integration of 2-DE into a high-throughput differential expression proteomics pipeline. The proposed method is based on robust automated image normalization (RAIN) to circumvent the drawbacks of traditional approaches. These use symbolic representation at the very early stages of the analysis, which introduces persistent errors due to inaccuracies in modelling and alignment. In RAIN, a third-order volume-invariant B-spline model is incorporated into a multi-resolution schema to correct for geometric and expression inhomogeneity at multiple scales. The normalized images can then be compared directly in the image domain for quantitative differential analysis. Through evaluation against an existing state-of-the-art method on real and synthetically warped 2D gels, the proposed analysis framework demonstrates substantial improvements in matching accuracy and differential sensitivity. High-throughput analysis is established through an accelerated GPGPU (general purpose computation on graphics cards) implementation. Supplementary material, software and images used in the validation are available at http://www.proteomegrid.org/rain/.

Automated generation of lattice QCD Feynman rules

NASA Astrophysics Data System (ADS)

Hart, A.; von Hippel, G. M.; Horgan, R. R.; Müller, E. H.

2009-12-01

The derivation of the Feynman rules for lattice perturbation theory from actions and operators is complicated, especially for highly improved actions such as HISQ. This task is, however, both important and particularly suitable for automation. We describe a suite of software to generate and evaluate Feynman rules for a wide range of lattice field theories with gluons and (relativistic and/or heavy) quarks. Our programs are capable of dealing with actions as complicated as (m)NRQCD and HISQ. Automated differentiation methods are used to calculate also the derivatives of Feynman diagrams. Program summaryProgram title: HiPPY, HPsrc Catalogue identifier: AEDX_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDX_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GPLv2 (see Additional comments below) No. of lines in distributed program, including test data, etc.: 513 426 No. of bytes in distributed program, including test data, etc.: 4 893 707 Distribution format: tar.gz Programming language: Python, Fortran95 Computer: HiPPy: Single-processor workstations. HPsrc: Single-processor workstations and MPI-enabled multi-processor systems Operating system: HiPPy: Any for which Python v2.5.x is available. HPsrc: Any for which a standards-compliant Fortran95 compiler is available Has the code been vectorised or parallelised?: Yes RAM: Problem specific, typically less than 1 GB for either code Classification: 4.4, 11.5 Nature of problem: Derivation and use of perturbative Feynman rules for complicated lattice QCD actions. Solution method: An automated expansion method implemented in Python (HiPPy) and code to use expansions to generate Feynman rules in Fortran95 (HPsrc). Restrictions: No general restrictions. Specific restrictions are discussed in the text. Additional comments: The HiPPy and HPsrc codes are released under the second version of the GNU General Public Licence (GPL v2). Therefore anyone is free to use or modify the code for their own calculations. As part of the licensing, we ask that any publications including results from the use of this code or of modifications of it cite Refs. [1,2] as well as this paper. Finally, we also ask that details of these publications, as well as of any bugs or required or useful improvements of this core code, would be communicated to us. Running time: Very problem specific, depending on the complexity of the Feynman rules and the number of integration points. Typically between a few minutes and several weeks. The installation tests provided with the program code take only a few seconds to run. References:A. Hart, G.M. von Hippel, R.R. Horgan, L.C. Storoni, Automatically generating Feynman rules for improved lattice eld theories, J. Comput. Phys. 209 (2005) 340-353, doi:10.1016/j.jcp.2005.03.010, arXiv:hep-lat/0411026. M. Lüscher, P. Weisz, Efficient Numerical Techniques for Perturbative Lattice Gauge Theory Computations, Nucl. Phys. B 266 (1986) 309, doi:10.1016/0550-3213(86)90094-5.

Development of a General-Purpose Analysis System Based on a Programmable Fluid Processor Final Report CRADA No. TC-2027-01

DOE Office of Scientific and Technical Information (OSTI.GOV)

McConaghy, C. F.; Gascoyne, P. R.

The purpose ofthis project was to develop a general-purpose analysis system based on a programmable fluid processor (PFP). The PFP is an array of electrodes surrounded by fluid reservoirs and injectors. Injected droplets of various reagents are manjpulated and combined on the array by Dielectrophoretic (DEP) forces. The goal was to create a small handheld device that could accomplish the tasks currently undertaken by much larger, time consuming, manual manipulation in the lab. The entire effo1t was funded by DARPA under the Bio-Flips program. MD Anderson Cancer Center was the PI for the DARPA effort. The Bio-Flips program was amore » 3- year program that ran from September 2000 to September 2003. The CRADA was somewhat behind the Bi-Flips program running from June 2001 to June 2004 with a no cost extension to September 2004.« less

Line Pilots' Attitudes about and Experience with Flight Deck Automation: Results of an International Survey and Proposed Guidelines

NASA Technical Reports Server (NTRS)

Rudisill, Marianne

1995-01-01

A survey of line pilots' attitudes about flight deck automation was conducted by the Royal Air Force Institute of Aviation Medicine (RAF IAM, Farnborough, UK) under the sponsorship of the United Kingdom s Civil Aviation Authority and in cooperation with IATA (the International Air Transport Association). Survey freehand comments given by pilots operating 13 types of commercial transports across five manufacturers (Airbus, Boeing, British Aerospace, Lockheed, and McDonnell-Douglas) and 57 air carriers/organizations were analyzed by NASA. These data provide a "lessons learned" knowledge base which may be used for the definition of guidelines for flight deck automation and its associated crew interface within the High Speed Research Program. The aircraft chosen for analysis represented a progression of levels of automation sophistication and complexity, from "Basic" types (e.g., B727, DC9), through "Transition" types (e.g., A300, Concorde), to two levels of glass cockpits (e.g., Glass 1: e.g., A310; Glass 2: e.g., B747-400). This paper reports the results of analyses of comments from pilots flying commercial transport types having the highest level of automation sophistication (B757/B767, B747-400, and A320). Comments were decomposed into five categories relating to: (1) general observations with regard to flight deck automation; comments concerning the (2) design and (3) crew understanding of automation and the crew interface; (4) crew operations with automation; and (5) personal factors affecting crew/automation interaction. The goal of these analyses is to contribute to the definition of guidelines which may be used during design of future aircraft flight decks.

Assessment of Automated Analyses of Cell Migration on Flat and Nanostructured Surfaces

PubMed Central

Grădinaru, Cristian; Łopacińska, Joanna M.; Huth, Johannes; Kestler, Hans A.; Flyvbjerg, Henrik; Mølhave, Kristian

2012-01-01

Motility studies of cells often rely on computer software that analyzes time-lapse recorded movies and establishes cell trajectories fully automatically. This raises the question of reproducibility of results, since different programs could yield significantly different results of such automated analysis. The fact that the segmentation routines of such programs are often challenged by nanostructured surfaces makes the question more pertinent. Here we illustrate how it is possible to track cells on bright field microscopy images with image analysis routines implemented in an open-source cell tracking program, PACT (Program for Automated Cell Tracking). We compare the automated motility analysis of three cell tracking programs, PACT, Autozell, and TLA, using the same movies as input for all three programs. We find that different programs track overlapping, but different subsets of cells due to different segmentation methods. Unfortunately, population averages based on such different cell populations, differ significantly in some cases. Thus, results obtained with one software package are not necessarily reproducible by other software. PMID:24688640

Computational methods for fracture analysis of heavy-section steel technology (HSST) pressure vessel experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bass, B.R.; Bryan, R.H.; Bryson, J.W.

This paper summarizes the capabilities and applications of the general-purpose and special-purpose computer programs that have been developed for use in fracture mechanics analyses of HSST pressure vessel experiments. Emphasis is placed on the OCA/USA code, which is designed for analysis of pressurized-thermal-shock (PTS) conditions, and on the ORMGEN/ADINA/ORVIRT system which is used for more general analysis. Fundamental features of these programs are discussed, along with applications to pressure vessel experiments.

Fuzzy Control/Space Station automation

NASA Technical Reports Server (NTRS)

Gersh, Mark

1990-01-01

Viewgraphs on fuzzy control/space station automation are presented. Topics covered include: Space Station Freedom (SSF); SSF evolution; factors pointing to automation & robotics (A&R); astronaut office inputs concerning A&R; flight system automation and ground operations applications; transition definition program; and advanced automation software tools.

Library Automation in Sub Saharan Africa: Case Study of the University of Botswana

ERIC Educational Resources Information Center

Mutula, Stephen Mudogo

2012-01-01

Purpose: This article aims to present experiences and the lessons learned from the University of Botswana (UB) library automation project. The implications of the project for similar libraries planning automation in sub Saharan Africa and beyond are adduced. Design/methodology/approach: The article is a case study of library automation at the…

Automation of Acquisition Records and Routine in the University Library, Newcastle upon Tyne

ERIC Educational Resources Information Center

Line, Maurice B.

2006-01-01

Purpose: Reports on the trial of an automated order routine for the University Library in Newcastle which began in April 1966. Design/methodology/approach: Presents the author's experiences of the manual order processing system, and the impetus for trialling an automated system. The stages of the automated system are described in detail. Findings:…

Automated Scoring of L2 Spoken English with Random Forests

ERIC Educational Resources Information Center

Kobayashi, Yuichiro; Abe, Mariko

2016-01-01

The purpose of the present study is to assess second language (L2) spoken English using automated scoring techniques. Automated scoring aims to classify a large set of learners' oral performance data into a small number of discrete oral proficiency levels. In automated scoring, objectively measurable features such as the frequencies of lexical and…

State of Iowa Scope and Sequence for Vocational Home Economics.

ERIC Educational Resources Information Center

Iowa State Dept. of Public Instruction, Des Moines. Div. of Career Education.

This scope and sequence guide for vocational home economics programs in Iowa discusses the most important dimensions of the program and describes the general purposes of programs along with factors that affect them, both in general and for Iowa specifically. The introductory chapter of the guide sets the context and the mission and also includes a…

Use of ICT in College Libraries in Karnataka, India: A Survey

ERIC Educational Resources Information Center

Kumar, B. T. Sampath; Biradar, B. S.

2010-01-01

Purpose; The purpose of this paper is to examine the use of information communication technology (ICT) in 31 college libraries in Karnataka, India by investigating the ICT infrastructure, current status of library automation, barriers to implementation of library automation and also librarians' attitudes towards the use of ICT.…

Automated Serials Control at the Indian Institutes of Technology: An Overview

ERIC Educational Resources Information Center

Ghosh, Tapas Kumar; Panda, K. C.

2011-01-01

Purpose: The purpose of this paper is to highlight the functional attributes of the automated serials control systems of the libraries in seven Indian Institutes of Technology (IITs) and provide a comparative analysis. Design/methodology/approach: Features of the serials control modules of the library management systems (LMSs) in use in the…

45 CFR 79.1 - Basis and purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Welfare Department of Health and Human Services GENERAL ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES § 79.1 Basis and purpose. (a) Basis. This part implements the Program Fraud Civil Remedies Act of 1986, Pub. L... for imposing civil penalties and assessments against persons who make, submit, or present, or cause to...

45 CFR 79.1 - Basis and purpose.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES § 79.1 Basis and purpose. (a) Basis. This part implements the Program Fraud Civil Remedies Act of 1986, Pub. L... for imposing civil penalties and assessments against persons who make, submit, or present, or cause to...

45 CFR 79.1 - Basis and purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES § 79.1 Basis and purpose. (a) Basis. This part implements the Program Fraud Civil Remedies Act of 1986, Pub. L... for imposing civil penalties and assessments against persons who make, submit, or present, or cause to...

45 CFR 79.1 - Basis and purpose.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES § 79.1 Basis and purpose. (a) Basis. This part implements the Program Fraud Civil Remedies Act of 1986, Pub. L... for imposing civil penalties and assessments against persons who make, submit, or present, or cause to...

10 CFR 851.1 - Scope and purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF ENERGY WORKER SAFETY AND HEALTH PROGRAM General Provisions § 851.1 Scope and purpose. (a) The worker safety and health requirements in this part govern the conduct of contractor activities at DOE sites. (b) This part establishes the: (1) Requirements for a worker safety and health program that...

40 CFR 144.1 - Purpose and scope of part 144.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM General Provisions § 144.1 Purpose and scope of part 144. (a) Contents of part 144. The regulations in this part set forth requirements for the Underground... for which in his judgment a State underground injection control program may be necessary to assure...

40 CFR 144.1 - Purpose and scope of part 144.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM General Provisions § 144.1 Purpose and scope of part 144. (a) Contents of part 144. The regulations in this part set forth requirements for the Underground... for which in his judgment a State underground injection control program may be necessary to assure...

40 CFR 144.1 - Purpose and scope of part 144.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM General Provisions § 144.1 Purpose and scope of part 144. (a) Contents of part 144. The regulations in this part set forth requirements for the Underground... for which in his judgment a State underground injection control program may be necessary to assure...

40 CFR 144.1 - Purpose and scope of part 144.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM General Provisions § 144.1 Purpose and scope of part 144. (a) Contents of part 144. The regulations in this part set forth requirements for the Underground... for which in his judgment a State underground injection control program may be necessary to assure...

Finite element meshing of ANSYS (trademark) solid models

NASA Technical Reports Server (NTRS)

Kelley, F. S.

1987-01-01

A large scale, general purpose finite element computer program, ANSYS, developed and marketed by Swanson Analysis Systems, Inc. is discussed. ANSYS was perhaps the first commercially available program to offer truly interactive finite element model generation. ANSYS's purpose is for solid modeling. This application is briefly discussed and illustrated.

38 CFR 1.891 - Purpose of program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Purpose of program. 1.891 Section 1.891 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS GENERAL PROVISIONS... must finance their own education or vocational training. In view of this, the Department of Veterans...

38 CFR 1.891 - Purpose of program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Purpose of program. 1.891 Section 1.891 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS GENERAL PROVISIONS... must finance their own education or vocational training. In view of this, the Department of Veterans...

38 CFR 1.891 - Purpose of program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Purpose of program. 1.891 Section 1.891 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS GENERAL PROVISIONS... must finance their own education or vocational training. In view of this, the Department of Veterans...

Avionics Maintenance Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents the avionics maintenance technology curriculum for technical institutes in Georgia. The general information section contains the following for both the diploma program and the associate degree program: purpose and objectives; program description, including admissions, typical job titles, and accreditation and…

40 CFR 97.201 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS CAIR SO2 Trading Program General Provisions... Interstate Rule (CAIR) SO2 Trading Program, under section 110 of the Clean Air Act and § 52.36 of this...

Intelligent automated surface grid generation

NASA Technical Reports Server (NTRS)

Yao, Ke-Thia; Gelsey, Andrew

1995-01-01

The goal of our research is to produce a flexible, general grid generator for automated use by other programs, such as numerical optimizers. The current trend in the gridding field is toward interactive gridding. Interactive gridding more readily taps into the spatial reasoning abilities of the human user through the use of a graphical interface with a mouse. However, a sometimes fruitful approach to generating new designs is to apply an optimizer with shape modification operators to improve an initial design. In order for this approach to be useful, the optimizer must be able to automatically grid and evaluate the candidate designs. This paper describes and intelligent gridder that is capable of analyzing the topology of the spatial domain and predicting approximate physical behaviors based on the geometry of the spatial domain to automatically generate grids for computational fluid dynamics simulators. Typically gridding programs are given a partitioning of the spatial domain to assist the gridder. Our gridder is capable of performing this partitioning. This enables the gridder to automatically grid spatial domains of wide range of configurations.

Technology for the Future: In-Space Technology Experiments Program, part 2

NASA Technical Reports Server (NTRS)

Breckenridge, Roger A. (Compiler); Clark, Lenwood G. (Compiler); Willshire, Kelli F. (Compiler); Beck, Sherwin M. (Compiler); Collier, Lisa D. (Compiler)

1991-01-01

The purpose of the Office of Aeronautics and Space Technology (OAST) In-Space Technology Experiments Program In-STEP 1988 Workshop was to identify and prioritize technologies that are critical for future national space programs and require validation in the space environment, and review current NASA (In-Reach) and industry/ university (Out-Reach) experiments. A prioritized list of the critical technology needs was developed for the following eight disciplines: structures; environmental effects; power systems and thermal management; fluid management and propulsion systems; automation and robotics; sensors and information systems; in-space systems; and humans in space. This is part two of two parts and contains the critical technology presentations for the eight theme elements and a summary listing of critical space technology needs for each theme.

Computer Programs For Automated Welding System

NASA Technical Reports Server (NTRS)

Agapakis, John E.

1993-01-01

Computer programs developed for use in controlling automated welding system described in MFS-28578. Together with control computer, computer input and output devices and control sensors and actuators, provide flexible capability for planning and implementation of schemes for automated welding of specific workpieces. Developed according to macro- and task-level programming schemes, which increases productivity and consistency by reducing amount of "teaching" of system by technician. System provides for three-dimensional mathematical modeling of workpieces, work cells, robots, and positioners.

45 CFR 95.631 - Cost identification for purpose of FFP claims.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Cost identification for purpose of FFP claims. 95.631 Section 95.631 Public Welfare Department of Health and Human Services GENERAL ADMINISTRATION GENERAL ADMINISTRATION-GRANT PROGRAMS (PUBLIC ASSISTANCE, MEDICAL ASSISTANCE AND STATE CHILDREN'S HEALTH...

45 CFR 95.631 - Cost identification for purpose of FFP claims.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Cost identification for purpose of FFP claims. 95.631 Section 95.631 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION GENERAL ADMINISTRATION-GRANT PROGRAMS (PUBLIC ASSISTANCE, MEDICAL ASSISTANCE AND STATE CHILDREN'S HEALTH...

45 CFR 95.631 - Cost identification for purpose of FFP claims.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Cost identification for purpose of FFP claims. 95.631 Section 95.631 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION GENERAL ADMINISTRATION-GRANT PROGRAMS (PUBLIC ASSISTANCE, MEDICAL ASSISTANCE AND STATE CHILDREN'S HEALTH...