Some rules for polydimensional squeezing

NASA Technical Reports Server (NTRS)

Manko, Vladimir I.

1994-01-01

The review of the following results is presented: For mixed state light of N-mode electromagnetic field described by Wigner function which has generic Gaussian form, the photon distribution function is obtained and expressed explicitly in terms of Hermite polynomials of 2N-variables. The momenta of this distribution are calculated and expressed as functions of matrix invariants of the dispersion matrix. The role of new uncertainty relation depending on photon state mixing parameter is elucidated. New sum rules for Hermite polynomials of several variables are found. The photon statistics of polymode even and odd coherent light and squeezed polymode Schroedinger cat light is given explicitly. Photon distribution for polymode squeezed number states expressed in terms of multivariable Hermite polynomials is discussed.

Effect of Critical Displacement Parameter on Slip Regime at Subduction Fault

NASA Astrophysics Data System (ADS)

Muldashev, Iskander; Sobolev, Stephan

2016-04-01

It is widely accepted that for the simple fault models value of critical displacement parameter (Dc) in Ruina-Dietrich's rate-and-state friction law is responsible for the transition from stick-slip regime at low Dc to non-seismic creep regime at large Dc. However, neither the value of "transition" Dc parameter nor the character of the transition is known for the realistic subduction zone setting. Here we investigate effect of Dc on regime of slip at subduction faults for two setups, generic model similar to simple shear elastic slider under quasistatic loading and full subduction model with appropriate geometry, stress and temperature distribution similar to the setting at the site of the Great Chile Earthquake of 1960. In our modeling we use finite element numerical technique that employs non-linear elasto-visco-plastic rheology in the entire model domain with rate-and-state plasticity within the fault zone. The model generates spontaneous earthquake sequence. Adaptive time-step integration procedure varies time step from 40 seconds at instability (earthquake), and gradually increases it to 5 years during postseismic relaxation. The technique allows observing the effect of Dc on period, magnitude of earthquakes through the cycles. We demonstrate that our modeling results for the generic model are consistent with the previous theoretical and numeric modeling results. For the full subduction model we obtain transition from non-seismic creep to stick-slip regime at Dc about 20 cm. We will demonstrate and discuss the features of the transition regimes in both generic and realistic subduction models.

Stretched exponential distributions in nature and economy: ``fat tails'' with characteristic scales

NASA Astrophysics Data System (ADS)

Laherrère, J.; Sornette, D.

1998-04-01

To account quantitatively for many reported "natural" fat tail distributions in Nature and Economy, we propose the stretched exponential family as a complement to the often used power law distributions. It has many advantages, among which to be economical with only two adjustable parameters with clear physical interpretation. Furthermore, it derives from a simple and generic mechanism in terms of multiplicative processes. We show that stretched exponentials describe very well the distributions of radio and light emissions from galaxies, of US GOM OCS oilfield reserve sizes, of World, US and French agglomeration sizes, of country population sizes, of daily Forex US-Mark and Franc-Mark price variations, of Vostok (near the south pole) temperature variations over the last 400 000 years, of the Raup-Sepkoski's kill curve and of citations of the most cited physicists in the world. We also discuss its potential for the distribution of earthquake sizes and fault displacements. We suggest physical interpretations of the parameters and provide a short toolkit of the statistical properties of the stretched exponentials. We also provide a comparison with other distributions, such as the shifted linear fractal, the log-normal and the recently introduced parabolic fractal distributions.

Do generics offer significant savings to the UK National Health Service?

PubMed

Kanavos, Panos

2007-01-01

The UK has traditionally had strong proxy demand-side measures favouring generic drug use, including prescribing guidance, financial incentives and encouraging generic prescribing. At distribution level, pharmacies are paid a salary for their dispensing work, based on volume dispensed, and procure generic products on the basis of discounts given to them by manufacturers or wholesalers. The supply-side has been subject to price regulation, and the recent requirement for manufacturers/wholesalers to report prices net of discounts to the DoH, indicate that reimbursed prices for generics may be higher than commodity level. To investigate the level of discounts off the Drug Tariff Price made available to pharmacies and, determine whether the NHS could have a better deal than currently from generic drug purchasing. Data on net prices were acquired for different presentations of 12 generic molecules selected across different therapeutic categories and included in the 50 most selling generic prescription only products in the UK in the first quarter of 2005. For these products, 31 out of a possible 34 presentations (90%) were surveyed. The data sources were price lists of three leading full-line wholesalers (one national, two regional), out of a possible 11 full-line wholesalers (27.2%), and three leading generic drug manufacturers, out of a possible 15 manufacturers (20%). Generic prescribing in the selected molecules was 94.6%, above the national average of 80%, and the total net ingredient cost (NIC) was 675 million pounds, of which 607.5 million pounds (90%) was generic. In 20 of the product presentations reviewed (64.5%), maximum discounts exceeded 60%, whereas in seven (22.6%) maximum discounts ranged between 50 and 60% off the Drug Tariff Price. Reimbursed prices for leading generic molecules are significantly higher than their pharmacy acquisition cost. The NHS is reimbursing generics at too high prices and a significant proportion of the reimbursed price accrues to the distribution chain in a fashion that resembles an indirect subsidy. The NHS can improve efficiency as well as increase savings, by purchasing generics closer to their market price. This would require changes in the way pharmacies are reimbursed, for instance, by changing the way the clawback is calculated, or altogether abolishing discounts and introducing a fixed dispensing fee; it could also mean introducing transparency in the determination of Drug Tariff prices by the relevant stakeholders. As the cost per generic script is, in the majority of cases, below the dispensing fee, the current reimbursement system for generics results in a re-distribution from patients and the NHS to the retail distribution chain.

Advanced ADA Workshop Held in Biloxi, Mississippi on 24-27 January 1989

DTIC Science & Technology

1989-01-27

Software Engineering (Break at 2:30j 6:30-8:00 Keesler AFB Reception Officers’ Club WEDNESDAY - 25 JANIJ1APY 9:00-12:00 Bldc 1002 Generics (Break at 10...TextIO.FileType: -- NO! procedure Wrong; -- problem is FileType is limited private Object Parameters A More Useful Example generic Control -Block : in out... control the precision used Float Type Parameters An Example generic type FloatType is digits <>; function Sqrt(X : FloatType) return FloatType

Universal inverse power-law distribution for temperature and rainfall in the UK region

NASA Astrophysics Data System (ADS)

Selvam, A. M.

2014-06-01

Meteorological parameters, such as temperature, rainfall, pressure, etc., exhibit selfsimilar space-time fractal fluctuations generic to dynamical systems in nature such as fluid flows, spread of forest fires, earthquakes, etc. The power spectra of fractal fluctuations display inverse power-law form signifying long-range correlations. A general systems theory model predicts universal inverse power-law form incorporating the golden mean for the fractal fluctuations. The model predicted distribution was compared with observed distribution of fractal fluctuations of all size scales (small, large and extreme values) in the historic month-wise temperature (maximum and minimum) and total rainfall for the four stations Oxford, Armagh, Durham and Stornoway in the UK region, for data periods ranging from 92 years to 160 years. For each parameter, the two cumulative probability distributions, namely cmax and cmin starting from respectively maximum and minimum data value were used. The results of the study show that (i) temperature distributions (maximum and minimum) follow model predicted distribution except for Stornowy, minimum temperature cmin. (ii) Rainfall distribution for cmin follow model predicted distribution for all the four stations. (iii) Rainfall distribution for cmax follows model predicted distribution for the two stations Armagh and Stornoway. The present study suggests that fractal fluctuations result from the superimposition of eddy continuum fluctuations.

New best estimates for radionuclide solid-liquid distribution coefficients in soils. Part 2: naturally occurring radionuclides.

PubMed

Vandenhove, H; Gil-García, C; Rigol, A; Vidal, M

2009-09-01

Predicting the transfer of radionuclides in the environment for normal release, accidental, disposal or remediation scenarios in order to assess exposure requires the availability of an important number of generic parameter values. One of the key parameters in environmental assessment is the solid liquid distribution coefficient, K(d), which is used to predict radionuclide-soil interaction and subsequent radionuclide transport in the soil column. This article presents a review of K(d) values for uranium, radium, lead, polonium and thorium based on an extensive literature survey, including recent publications. The K(d) estimates were presented per soil groups defined by their texture and organic matter content (Sand, Loam, Clay and Organic), although the texture class seemed not to significantly affect K(d). Where relevant, other K(d) classification systems are proposed and correlations with soil parameters are highlighted. The K(d) values obtained in this compilation are compared with earlier review data.

Freezing lines of colloidal Yukawa spheres. II. Local structure and characteristic lengths

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gapinski, Jacek, E-mail: gapinski@amu.edu.pl; Patkowski, Adam; NanoBioMedical Center, A. Mickiewicz University, Umultowska 85, 61-614 Poznań

Using the Rogers-Young (RY) integral equation scheme for the static pair correlation functions combined with the liquid-phase Hansen-Verlet freezing rule, we study the generic behavior of the radial distribution function and static structure factor of monodisperse charge-stabilized suspensions with Yukawa-type repulsive particle interactions at freezing. In a related article, labeled Paper I [J. Gapinski, G. Nägele, and A. Patkowski, J. Chem. Phys. 136, 024507 (2012)], this hybrid method was used to determine two-parameter freezing lines for experimentally controllable parameters, characteristic of suspensions of charged silica spheres in dimethylformamide. A universal scaling of the RY radial distribution function maximum is shownmore » to apply to the liquid-bcc and liquid-fcc segments of the universal freezing line. A thorough analysis is made of the behavior of characteristic distances and wavenumbers, next-neighbor particle coordination numbers, osmotic compressibility factor, and the Ravaché-Mountain-Streett minimum-maximum radial distribution function ratio.« less

Impact of Reactor Operating Parameters on Cask Reactivity in BWR Burnup Credit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ilas, Germina; Betzler, Benjamin R; Ade, Brian J

This paper discusses the effect of reactor operating parameters used in fuel depletion calculations on spent fuel cask reactivity, with relevance for boiling-water reactor (BWR) burnup credit (BUC) applications. Assessments that used generic BWR fuel assembly and spent fuel cask configurations are presented. The considered operating parameters, which were independently varied in the depletion simulations for the assembly, included fuel temperature, bypass water density, specific power, and operating history. Different operating history scenarios were considered for the assembly depletion to determine the effect of relative power distribution during the irradiation cycles, as well as the downtime between cycles. Depletion, decay,more » and criticality simulations were performed using computer codes and associated nuclear data within the SCALE code system. Results quantifying the dependence of cask reactivity on the assembly depletion parameters are presented herein.« less

GENERIC VERIFICATION PROTOCOL: DISTRIBUTED GENERATION AND COMBINED HEAT AND POWER FIELD TESTING PROTOCOL

EPA Science Inventory

This report is a generic verification protocol by which EPA’s Environmental Technology Verification program tests newly developed equipment for distributed generation of electric power, usually micro-turbine generators and internal combustion engine generators. The protocol will ...

Space platform utilities distribution study

NASA Technical Reports Server (NTRS)

Lefever, A. E.

1980-01-01

Generic concepts for the installation of power data and thermal fluid distribution lines on large space platforms were discussed. Connections with central utility subsystem modules and pallet interfaces were also considered. Three system concept study platforms were used as basepoints for the detail development. The tradeoff of high voltage low voltage power distribution and the impact of fiber optics as a data distribution mechanism were analyzed. Thermal expansion and temperature control of utility lines and ducts were considered. Technology developments required for implementation of the generic distribution concepts were identified.

Optimization design and laser damage threshold analysis of pulse compression multilayer dielectric gratings

NASA Astrophysics Data System (ADS)

Fan, Shuwei; Bai, Liang; Chen, Nana

2016-08-01

As one of the key elements of high-power laser systems, the pulse compression multilayer dielectric grating is required for broader band, higher diffraction efficiency and higher damage threshold. In this paper, the multilayer dielectric film and the multilayer dielectric gratings(MDG) were designed by eigen matrix and optimized with the help of generic algorithm and rigorous coupled wave method. The reflectivity was close to 100% and the bandwith were over 250nm, twice compared to the unoptimized film structure. The simulation software of standing wave field distribution within MDG was developed and the electric field of the MDG was calculated. And the key parameters which affected the electric field distribution were also studied.

Integrated hydraulic and organophosphate pesticide injection simulations for enhancing event detection in water distribution systems.

PubMed

Schwartz, Rafi; Lahav, Ori; Ostfeld, Avi

2014-10-15

As a complementary step towards solving the general event detection problem of water distribution systems, injection of the organophosphate pesticides, chlorpyrifos (CP) and parathion (PA), were simulated at various locations within example networks and hydraulic parameters were calculated over 24-h duration. The uniqueness of this study is that the chemical reactions and byproducts of the contaminants' oxidation were also simulated, as well as other indicative water quality parameters such as alkalinity, acidity, pH and the total concentration of free chlorine species. The information on the change in water quality parameters induced by the contaminant injection may facilitate on-line detection of an actual event involving this specific substance and pave the way to development of a generic methodology for detecting events involving introduction of pesticides into water distribution systems. Simulation of the contaminant injection was performed at several nodes within two different networks. For each injection, concentrations of the relevant contaminants' mother and daughter species, free chlorine species and water quality parameters, were simulated at nodes downstream of the injection location. The results indicate that injection of these substances can be detected at certain conditions by a very rapid drop in Cl2, functioning as the indicative parameter, as well as a drop in alkalinity concentration and a small decrease in pH, both functioning as supporting parameters, whose usage may reduce false positive alarms. Copyright © 2014 Elsevier Ltd. All rights reserved.

Developing competitive and sustainable Polish generic medicines market.

PubMed

Simoens, Steven

2009-10-01

To descriptively analyze the policy environment surrounding the Polish generic medicines retail market. The policy analysis was based on an international literature review. Also, a simulation exercise was carried out to compute potential savings from substituting generic for originator medicines in Poland using IMS Health pharmaceutical intelligence data. Poland has a mature, high-volume, low-value generic medicines market, primarily driven by the establishment of the reference price at the price of the cheapest medicine in combination with pricing regulation and the low level of medicine prices. The practice of discounting in the distribution chain implies that the National Health Fund and patients do not capture the potential savings from a generic medicines market where companies compete on price. This high-volume market has benefited in the past from the limited availability of originator medicines and a short data exclusivity period, even though there are no incentives for physicians to prescribe generic medicines and a financial disincentive for pharmacists to dispense generic medicines. Increased generic substitution would be expected to reduce public expenditure on originator medicines by 21%. To develop a competitive and sustainable market, Poland needs to consider moving away from competition by discount to competition by price. This could be achieved by replacing maximum distribution margins by fixed margins. Also, Poland may wish to raise reference prices as a temporary measure to boost market entry for medicine classes with few generic medicines.

Exact solution of the XXX Gaudin model with generic open boundaries

NASA Astrophysics Data System (ADS)

Hao, Kun; Cao, Junpeng; Yang, Tao; Yang, Wen-Li

2015-03-01

The XXX Gaudin model with generic integrable open boundaries specified by the most general non-diagonal reflecting matrices is studied. Besides the inhomogeneous parameters, the associated Gaudin operators have six free parameters which break the U(1) -symmetry. With the help of the off-diagonal Bethe ansatz, we successfully obtained the eigenvalues of these Gaudin operators and the corresponding Bethe ansatz equations.

Electrodynamic parameters in the nighttime sector during auroral substorms

NASA Technical Reports Server (NTRS)

Fujii, R.; Hoffman, R. A.; Anderson, P. C.; Craven, J. D.; Sugiura, M.; Frank, L. A.; Maynard, N. C.

1994-01-01

The characteristics of the large-scale electrodynamic parameters, field-aligned currents (FACs), electric fields, and electron precipitation, which are associated with auroral substorm events in the nighttime sector, have been obtained through a unique analysis which places the ionospheric measurements of these parameters into the context of a generic substorm determined from global auroral images. A generic bulge-type auroral emission region has been deduced from auroral images taken by the Dynamics Explorer 1 (DE 1) satellite during a number of isolated substorms, and the form has been divided into six sectors, based on the peculiar emission characteristics in each sector: west of bulge, surge horn, surge, middle surge, eastern bulge, and east of bulge. By comparing the location of passes of the Dynamics Explorer 2 (DE 2) satellite to the simultaneously obtained auroral images, each pass is placed onto the generic aurora. The organization of DE 2 data in this way has systematically clarified peculiar characteristics in the electrodynamic parameters. An upward net current mainly appears in the surge, with little net current in the surge horn and the west of bulge. The downward net current is distributed over wide longitudinal regions from the eastern bulge to the east of bulge. Near the poleward boundary of the expanding auroral bulge, a pair of oppositely directed FAC sheets is observed, with the downward FAC on the poleward side. This downward FAC and most of the upward FAC in the surge and the middle surge are assoc iated with narrow, intense antisunwqard convection, corresponding to an equatorward directed spikelike electric field. This pair of currents decreases in amplitude and latitudinal width toward dusk in the surge and the west of bulge, and the region 1 and 2 FACs become embedded in the sunward convection region. The upward FAC region associated with the spikelike field on the poleward edge of the bulge coincides well with intense electron precipitation and aurora appearing in this western and poleward protion of the bulge. The convection reversal is sharp in the west of bulge and surge horn sectors, and near the high-latitude boundary of the upward region 1, with a near stagnation region often extending over a large interval of latitude. In the eastern bulge and east of bulge sectors, the region 1 and 2 FACs are located in the sunward convection region, while a spikelike electric field occasionally appears poleward of the aurora but usually not associated with a pair of FAC sheets. In the eastern bulge, magnetic field data show complicated FAC distributions which correspond to current segments and filamentary currents.

A 3D generic inverse dynamic method using wrench notation and quaternion algebra.

PubMed

Dumas, R; Aissaoui, R; de Guise, J A

2004-06-01

In the literature, conventional 3D inverse dynamic models are limited in three aspects related to inverse dynamic notation, body segment parameters and kinematic formalism. First, conventional notation yields separate computations of the forces and moments with successive coordinate system transformations. Secondly, the way conventional body segment parameters are defined is based on the assumption that the inertia tensor is principal and the centre of mass is located between the proximal and distal ends. Thirdly, the conventional kinematic formalism uses Euler or Cardanic angles that are sequence-dependent and suffer from singularities. In order to overcome these limitations, this paper presents a new generic method for inverse dynamics. This generic method is based on wrench notation for inverse dynamics, a general definition of body segment parameters and quaternion algebra for the kinematic formalism.

Effect of platykurtic and leptokurtic distributions in the random-field Ising model: mean-field approach.

PubMed

Duarte Queirós, Sílvio M; Crokidakis, Nuno; Soares-Pinto, Diogo O

2009-07-01

The influence of the tail features of the local magnetic field probability density function (PDF) on the ferromagnetic Ising model is studied in the limit of infinite range interactions. Specifically, we assign a quenched random field whose value is in accordance with a generic distribution that bears platykurtic and leptokurtic distributions depending on a single parameter tau<3 to each site. For tau<5/3, such distributions, which are basically Student-t and r distribution extended for all plausible real degrees of freedom, present a finite standard deviation, if not the distribution has got the same asymptotic power-law behavior as a alpha-stable Lévy distribution with alpha=(3-tau)/(tau-1). For every value of tau, at specific temperature and width of the distribution, the system undergoes a continuous phase transition. Strikingly, we impart the emergence of an inflexion point in the temperature-PDF width phase diagrams for distributions broader than the Cauchy-Lorentz (tau=2) which is accompanied with a divergent free energy per spin (at zero temperature).

Checking distributional assumptions for pharmacokinetic summary statistics based on simulations with compartmental models.

PubMed

Shen, Meiyu; Russek-Cohen, Estelle; Slud, Eric V

2016-08-12

Bioequivalence (BE) studies are an essential part of the evaluation of generic drugs. The most common in vivo BE study design is the two-period two-treatment crossover design. AUC (area under the concentration-time curve) and Cmax (maximum concentration) are obtained from the observed concentration-time profiles for each subject from each treatment under each sequence. In the BE evaluation of pharmacokinetic crossover studies, the normality of the univariate response variable, e.g. log(AUC) 1 or log(Cmax), is often assumed in the literature without much evidence. Therefore, we investigate the distributional assumption of the normality of response variables, log(AUC) and log(Cmax), by simulating concentration-time profiles from two-stage pharmacokinetic models (commonly used in pharmacokinetic research) for a wide range of pharmacokinetic parameters and measurement error structures. Our simulations show that, under reasonable distributional assumptions on the pharmacokinetic parameters, log(AUC) has heavy tails and log(Cmax) is skewed. Sensitivity analyses are conducted to investigate how the distribution of the standardized log(AUC) (or the standardized log(Cmax)) for a large number of simulated subjects deviates from normality if distributions of errors in the pharmacokinetic model for plasma concentrations deviate from normality and if the plasma concentration can be described by different compartmental models.

Developing Competitive and Sustainable Polish Generic Medicines Market

PubMed Central

Simoens, Steven

2009-01-01

Aim To descriptively analyze the policy environment surrounding the Polish generic medicines retail market. Method The policy analysis was based on an international literature review. Also, a simulation exercise was carried out to compute potential savings from substituting generic for originator medicines in Poland using IMS Health pharmaceutical intelligence data. Results Poland has a mature, high-volume, low-value generic medicines market, primarily driven by the establishment of the reference price at the price of the cheapest medicine in combination with pricing regulation and the low level of medicine prices. The practice of discounting in the distribution chain implies that the National Health Fund and patients do not capture the potential savings from a generic medicines market where companies compete on price. This high-volume market has benefited in the past from the limited availability of originator medicines and a short data exclusivity period, even though there are no incentives for physicians to prescribe generic medicines and a financial disincentive for pharmacists to dispense generic medicines. Increased generic substitution would be expected to reduce public expenditure on originator medicines by 21%. Conclusion To develop a competitive and sustainable market, Poland needs to consider moving away from competition by discount to competition by price. This could be achieved by replacing maximum distribution margins by fixed margins. Also, Poland may wish to raise reference prices as a temporary measure to boost market entry for medicine classes with few generic medicines. PMID:19839067

Bioequivalence of generic and branded amoxicillin capsules in healthy human volunteers

PubMed Central

Pathak, Priyanka; Pandit, Vijaya A.; Dhande, Priti P.

2017-01-01

CONTEXT: The Medical Council of India urges doctors to prescribe generic drugs as far as possible. The Indian Medical Association had responded earlier saying that it requires guarantees on the quality of generic forms of drugs. Although no published scientific reports are available on the issue of therapeutic inequivalence, unconfirmed clinician accounts and newspaper reports of therapeutic inequivalence exist. AIM: This study was planned to ascertain whether bioequivalence of branded and generic amoxicillin capsule is comparable. SETTINGS AND DESIGN: An open-label, randomized, single-dose, two-treatment, two-sequence, two-period crossover oral bioequivalence study was conducted in 12 healthy, adult human subjects under fasting condition. MATERIALS AND METHODS: Serum samples, collected at 8 time points, were analyzed by a validated ultraviolet spectrophotometer method. Pharmacokinetic (PK) parameters such as area under the curve (AUC)0–t, AUC0–∞, Cmax, and Tmax were determined along with time above minimum inhibitory concentration (MIC). STATISTICAL ANALYSIS USED: The log-transformed PK parameters (Cmax, AUC0–t, AUC0–∞) were analyzed using a Two One-Sided Test ANOVA in SAS for each parameter. Tmax and MIC were analyzed by Wilcoxon rank-sum test in GraphPad Prism. RESULTS: Geometric mean ratio of Cmax fell within bioequivalence criteria. The upper and lower confidence limits of both AUC0–t and AUC0–∞ geometric mean ratio fell below bioequivalence criteria. Time above MIC of generic preparation was significantly lower than that of branded version. CONCLUSIONS: The generic capsule was not bioequivalent to the branded amoxicillin capsule. PMID:28706331

Development and validation of a generic finite element vehicle buck model for the analysis of driver rib fractures in real life nearside oblique frontal crashes.

PubMed

Iraeus, Johan; Lindquist, Mats

2016-10-01

Frontal crashes still account for approximately half of all fatalities in passenger cars, despite several decades of crash-related research. For serious injuries in this crash mode, several authors have listed the thorax as the most important. Computer simulation provides an effective tool to study crashes and evaluate injury mechanisms, and using stochastic input data, whole populations of crashes can be studied. The aim of this study was to develop a generic buck model and to validate this model on a population of real-life frontal crashes in terms of the risk of rib fracture. The study was conducted in four phases. In the first phase, real-life validation data were derived by analyzing NASS/CDS data to find the relationship between injury risk and crash parameters. In addition, available statistical distributions for the parameters were collected. In the second phase, a generic parameterized finite element (FE) model of a vehicle interior was developed based on laser scans from the A2MAC1 database. In the third phase, model parameters that could not be found in the literature were estimated using reverse engineering based on NCAP tests. Finally, in the fourth phase, the stochastic FE model was used to simulate a population of real-life crashes, and the result was compared to the validation data from phase one. The stochastic FE simulation model overestimates the risk of rib fracture, more for young occupants and less for senior occupants. However, if the effect of underestimation of rib fractures in the NASS/CDS material is accounted for using statistical simulations, the risk of rib fracture based on the stochastic FE model matches the risk based on the NASS/CDS data for senior occupants. The current version of the stochastic model can be used to evaluate new safety measures using a population of frontal crashes for senior occupants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Whirling and stability of flywheel systems, part I: Derivation of combined and lumped parameter models

NASA Astrophysics Data System (ADS)

Ramanujam, G.; Bert, C. W.

1983-06-01

The objective of this paper is to provide a theoretical foundation to predict many aspects of dynamic behavior of flywheel systems when spin-tested with a quill shaft support and driven by an air turbine. Theoretical analyses for the following are presented: (1) determination of natural frequencies (or for brevity critical speeds of various orders), (2) Routh-type stability analysis to determine the stability limits (i.e., the speed range within which small perturbations attenuate rather than cause catastrophic failure), and (3) forced whirling analysis to estimate the response of major components of the system to flywheel mass eccentricity and initial tilt. For the first and third kinds of analyses, two different mathematical models of the generic system are investigated. One is a seven-degree-of-freedom lumped parameter analysis, while the other is a combined distributed and lumped parameter analysis.

Probabilistic Radiological Performance Assessment Modeling and Uncertainty

NASA Astrophysics Data System (ADS)

Tauxe, J.

2004-12-01

A generic probabilistic radiological Performance Assessment (PA) model is presented. The model, built using the GoldSim systems simulation software platform, concerns contaminant transport and dose estimation in support of decision making with uncertainty. Both the U.S. Nuclear Regulatory Commission (NRC) and the U.S. Department of Energy (DOE) require assessments of potential future risk to human receptors of disposal of LLW. Commercially operated LLW disposal facilities are licensed by the NRC (or agreement states), and the DOE operates such facilities for disposal of DOE-generated LLW. The type of PA model presented is probabilistic in nature, and hence reflects the current state of knowledge about the site by using probability distributions to capture what is expected (central tendency or average) and the uncertainty (e.g., standard deviation) associated with input parameters, and propagating through the model to arrive at output distributions that reflect expected performance and the overall uncertainty in the system. Estimates of contaminant release rates, concentrations in environmental media, and resulting doses to human receptors well into the future are made by running the model in Monte Carlo fashion, with each realization representing a possible combination of input parameter values. Statistical summaries of the results can be compared to regulatory performance objectives, and decision makers are better informed of the inherently uncertain aspects of the model which supports their decision-making. While this information may make some regulators uncomfortable, they must realize that uncertainties which were hidden in a deterministic analysis are revealed in a probabilistic analysis, and the chance of making a correct decision is now known rather than hoped for. The model includes many typical features and processes that would be part of a PA, but is entirely fictitious. This does not represent any particular site and is meant to be a generic example. A practitioner could, however, start with this model as a GoldSim template and, by adding site specific features and parameter values (distributions), use this model as a starting point for a real model to be used in real decision making.

Generic Schemes for Single-Molecule Kinetics. 2: Information Content of the Poisson Indicator.

PubMed

Avila, Thomas R; Piephoff, D Evan; Cao, Jianshu

2017-08-24

Recently, we described a pathway analysis technique (paper 1) for analyzing generic schemes for single-molecule kinetics based upon the first-passage time distribution. Here, we employ this method to derive expressions for the Poisson indicator, a normalized measure of stochastic variation (essentially equivalent to the Fano factor and Mandel's Q parameter), for various renewal (i.e., memoryless) enzymatic reactions. We examine its dependence on substrate concentration, without assuming all steps follow Poissonian kinetics. Based upon fitting to the functional forms of the first two waiting time moments, we show that, to second order, the non-Poissonian kinetics are generally underdetermined but can be specified in certain scenarios. For an enzymatic reaction with an arbitrary intermediate topology, we identify a generic minimum of the Poisson indicator as a function of substrate concentration, which can be used to tune substrate concentration to the stochastic fluctuations and to estimate the largest number of underlying consecutive links in a turnover cycle. We identify a local maximum of the Poisson indicator (with respect to substrate concentration) for a renewal process as a signature of competitive binding, either between a substrate and an inhibitor or between multiple substrates. Our analysis explores the rich connections between Poisson indicator measurements and microscopic kinetic mechanisms.

GENERIC VERIFICATION PROTOCOL FOR AQUEOUS CLEANER RECYCLING TECHNOLOGIES

EPA Science Inventory

This generic verification protocol has been structured based on a format developed for ETV-MF projects. This document describes the intended approach and explain plans for testing with respect to areas such as test methodology, procedures, parameters, and instrumentation. Also ...

Predicting the Ability of Marine Mammal Populations to Compensate for Behavioral Disturbances

DTIC Science & Technology

2014-09-30

1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Predicting the Ability of Marine Mammal Populations to...determine the ability of marine mammal populations to respond to behavioral disturbances. These tools are to be generic and applicable in a wide range...scale consequences. OBJECTIVES • Develop simple, generic measures that allow the estimation of marine mammal populations and individuals to

Supersonic aerodynamic characteristics of an advanced F-16 derivative aircraft configuration

NASA Technical Reports Server (NTRS)

Fox, Mike C.; Forrest, Dana K.

1993-01-01

A supersonic wind tunnel investigation was conducted in the NASA Langley Unitary Plan Wind Tunnel on an advanced derivative configuration of the United States Air Force F-16 fighter. Longitudinal and lateral directional force and moment data were obtained at Mach numbers of 1.60 to 2.16 to evaluate basic performance parameters and control effectiveness. The aerodynamic characteristics for the F-16 derivative model were compared with the data obtained for the F-16C model and also with a previously tested generic wing model that features an identical plan form shape and similar twist distribution.

A comparative analysis of generics markets in five European countries.

PubMed

Garattini, L; Tediosi, F

2000-04-01

A generic medicine is a faithful copy of a mature drug--no longer under patent marketed with the chemical name of the active ingredient. This article analyses generics markets in five European countries: France, Germany Italy, The Netherlands and the U.K. The study investigate all the main issues--patent, approval to market, pricing and reimbursement, prescription and distribution--which affect the life cycle of a pharmaceutical product. The situation in the five countries varied widely. Because of European harmonization, patent legislation and approval procedures no longer affect much the development of generics. Only national legislation on patent protection approved before the EU directive came into force still plays a role. Approval differences seem to be due mainly to common practice, rather than to the regulations themselves. None of the countries have an efficient public information system on patent expiry. Generics have had more success in countries with more flexible pricing policies. Reimbursement has not yet been used widely to discriminate between generics and proprietary drugs. Financial incentives are based more on physicians' prescribing behaviour than on pharmacists. The freedom of pharmacy ownership and the consequent possibility of dispensing pharmaceuticals through different channels affects dramatically the structure of generics markets. A free market of wholesalers and retailers can enhance a comparative market, through horizontal and vertical integration all along the distribution chain. Such an environment has stimulate the success of unbranded generics by delegating strong purchasing power to distributors.

Pharmaceutical quality of generic isotretinoin products, compared with Roaccutane.

PubMed

Taylor, Peter W; Keenan, Michael H J

2006-03-01

Isotretinoin is the drug of choice for the management of severe recalcitrant nodular acne. Several generic products are available. However, their pharmaceutical quality, in particular particle size distribution, which may affect safety and efficacy is unknown. Hence, prescribing of some generic products may be problematic. To assess the pharmaceutical quality of 14 generic isotretinoin products compared with Roaccutane (F. Hoffmann-La Roche Ltd). Tests were performed according to Roche standard procedures, European and US pharmacopoeia specifications. Tests included isotretinoin content, identity and amount of impurities and degradation products, effect of accelerated shelf-life studies on stability, particle size distribution and composition of non-active ingredients. The 14 isotretinoin products differed by 30-fold in median particle size and showed variation in their non-active ingredients. The average isotretinoin content of Acnotin and Acne-Tretin fell outside the 95-105% Roche specifications. Following accelerated shelf-life tests, only four products retained isotretinoin content within Roche specifications, whilst Acne-Tretin (the only powder formulation) lost 72.5% isotretinoin content. Two generic products exceeded the +/- 2% specification (Ph. Eur.) and a further three exceeded the +/- 1% (USP) for tretinoin content, eight exceeded the 2.54% specification for total impurities and six contained >or= 5 unknown impurities. Isotretinoin-5.6-epoxide content exceeded the 1.04% specification in five generic products. Thirteen generic products failed to match Roaccutane in one or more tests and 11 failed in three or more tests. It cannot be assumed that all generic isotretinoin products are as therapeutically effective or safe as Roaccutane.

An open, object-based modeling approach for simulating subsurface heterogeneity

NASA Astrophysics Data System (ADS)

Bennett, J.; Ross, M.; Haslauer, C. P.; Cirpka, O. A.

2017-12-01

Characterization of subsurface heterogeneity with respect to hydraulic and geochemical properties is critical in hydrogeology as their spatial distribution controls groundwater flow and solute transport. Many approaches of characterizing subsurface heterogeneity do not account for well-established geological concepts about the deposition of the aquifer materials; those that do (i.e. process-based methods) often require forcing parameters that are difficult to derive from site observations. We have developed a new method for simulating subsurface heterogeneity that honors concepts of sequence stratigraphy, resolves fine-scale heterogeneity and anisotropy of distributed parameters, and resembles observed sedimentary deposits. The method implements a multi-scale hierarchical facies modeling framework based on architectural element analysis, with larger features composed of smaller sub-units. The Hydrogeological Virtual Reality simulator (HYVR) simulates distributed parameter models using an object-based approach. Input parameters are derived from observations of stratigraphic morphology in sequence type-sections. Simulation outputs can be used for generic simulations of groundwater flow and solute transport, and for the generation of three-dimensional training images needed in applications of multiple-point geostatistics. The HYVR algorithm is flexible and easy to customize. The algorithm was written in the open-source programming language Python, and is intended to form a code base for hydrogeological researchers, as well as a platform that can be further developed to suit investigators' individual needs. This presentation will encompass the conceptual background and computational methods of the HYVR algorithm, the derivation of input parameters from site characterization, and the results of groundwater flow and solute transport simulations in different depositional settings.

A suite of models to support the quantitative assessment of spread in pest risk analysis.

PubMed

Robinet, Christelle; Kehlenbeck, Hella; Kriticos, Darren J; Baker, Richard H A; Battisti, Andrea; Brunel, Sarah; Dupin, Maxime; Eyre, Dominic; Faccoli, Massimo; Ilieva, Zhenya; Kenis, Marc; Knight, Jon; Reynaud, Philippe; Yart, Annie; van der Werf, Wopke

2012-01-01

Pest Risk Analyses (PRAs) are conducted worldwide to decide whether and how exotic plant pests should be regulated to prevent invasion. There is an increasing demand for science-based risk mapping in PRA. Spread plays a key role in determining the potential distribution of pests, but there is no suitable spread modelling tool available for pest risk analysts. Existing models are species specific, biologically and technically complex, and data hungry. Here we present a set of four simple and generic spread models that can be parameterised with limited data. Simulations with these models generate maps of the potential expansion of an invasive species at continental scale. The models have one to three biological parameters. They differ in whether they treat spatial processes implicitly or explicitly, and in whether they consider pest density or pest presence/absence only. The four models represent four complementary perspectives on the process of invasion and, because they have different initial conditions, they can be considered as alternative scenarios. All models take into account habitat distribution and climate. We present an application of each of the four models to the western corn rootworm, Diabrotica virgifera virgifera, using historic data on its spread in Europe. Further tests as proof of concept were conducted with a broad range of taxa (insects, nematodes, plants, and plant pathogens). Pest risk analysts, the intended model users, found the model outputs to be generally credible and useful. The estimation of parameters from data requires insights into population dynamics theory, and this requires guidance. If used appropriately, these generic spread models provide a transparent and objective tool for evaluating the potential spread of pests in PRAs. Further work is needed to validate models, build familiarity in the user community and create a database of species parameters to help realize their potential in PRA practice.

A Suite of Models to Support the Quantitative Assessment of Spread in Pest Risk Analysis

PubMed Central

Robinet, Christelle; Kehlenbeck, Hella; Kriticos, Darren J.; Baker, Richard H. A.; Battisti, Andrea; Brunel, Sarah; Dupin, Maxime; Eyre, Dominic; Faccoli, Massimo; Ilieva, Zhenya; Kenis, Marc; Knight, Jon; Reynaud, Philippe; Yart, Annie; van der Werf, Wopke

2012-01-01

Pest Risk Analyses (PRAs) are conducted worldwide to decide whether and how exotic plant pests should be regulated to prevent invasion. There is an increasing demand for science-based risk mapping in PRA. Spread plays a key role in determining the potential distribution of pests, but there is no suitable spread modelling tool available for pest risk analysts. Existing models are species specific, biologically and technically complex, and data hungry. Here we present a set of four simple and generic spread models that can be parameterised with limited data. Simulations with these models generate maps of the potential expansion of an invasive species at continental scale. The models have one to three biological parameters. They differ in whether they treat spatial processes implicitly or explicitly, and in whether they consider pest density or pest presence/absence only. The four models represent four complementary perspectives on the process of invasion and, because they have different initial conditions, they can be considered as alternative scenarios. All models take into account habitat distribution and climate. We present an application of each of the four models to the western corn rootworm, Diabrotica virgifera virgifera, using historic data on its spread in Europe. Further tests as proof of concept were conducted with a broad range of taxa (insects, nematodes, plants, and plant pathogens). Pest risk analysts, the intended model users, found the model outputs to be generally credible and useful. The estimation of parameters from data requires insights into population dynamics theory, and this requires guidance. If used appropriately, these generic spread models provide a transparent and objective tool for evaluating the potential spread of pests in PRAs. Further work is needed to validate models, build familiarity in the user community and create a database of species parameters to help realize their potential in PRA practice. PMID:23056174

Sensitivity of estimated muscle force in forward simulation of normal walking

PubMed Central

Xiao, Ming; Higginson, Jill

2009-01-01

Generic muscle parameters are often used in muscle-driven simulations of human movement estimate individual muscle forces and function. The results may not be valid since muscle properties vary from subject to subject. This study investigated the effect of using generic parameters in a muscle-driven forward simulation on muscle force estimation. We generated a normal walking simulation in OpenSim and examined the sensitivity of individual muscle to perturbations in muscle parameters, including the number of muscles, maximum isometric force, optimal fiber length and tendon slack length. We found that when changing the number muscles included in the model, only magnitude of the estimated muscle forces was affected. Our results also suggest it is especially important to use accurate values of tendon slack length and optimal fiber length for ankle plantarflexors and knee extensors. Changes in force production one muscle were typically compensated for by changes in force production by muscles in the same functional muscle group, or the antagonistic muscle group. Conclusions regarding muscle function based on simulations with generic musculoskeletal parameters should be interpreted with caution. PMID:20498485

An oil fraction neural sensor developed using electrical capacitance tomography sensor data.

PubMed

Zainal-Mokhtar, Khursiah; Mohamad-Saleh, Junita

2013-08-26

This paper presents novel research on the development of a generic intelligent oil fraction sensor based on Electrical Capacitance Tomography (ECT) data. An artificial Neural Network (ANN) has been employed as the intelligent system to sense and estimate oil fractions from the cross-sections of two-component flows comprising oil and gas in a pipeline. Previous works only focused on estimating the oil fraction in the pipeline based on fixed ECT sensor parameters. With fixed ECT design sensors, an oil fraction neural sensor can be trained to deal with ECT data based on the particular sensor parameters, hence the neural sensor is not generic. This work focuses on development of a generic neural oil fraction sensor based on training a Multi-Layer Perceptron (MLP) ANN with various ECT sensor parameters. On average, the proposed oil fraction neural sensor has shown to be able to give a mean absolute error of 3.05% for various ECT sensor sizes.

An Oil Fraction Neural Sensor Developed Using Electrical capacitance Tomography Sensor Data

PubMed Central

Zainal-Mokhtar, Khursiah; Mohamad-Saleh, Junita

2013-01-01

This paper presents novel research on the development of a generic intelligent oil fraction sensor based on Electrical capacitance Tomography (ECT) data. An artificial Neural Network (ANN) has been employed as the intelligent system to sense and estimate oil fractions from the cross-sections of two-component flows comprising oil and gas in a pipeline. Previous works only focused on estimating the oil fraction in the pipeline based on fixed ECT sensor parameters. With fixed ECT design sensors, an oil fraction neural sensor can be trained to deal with ECT data based on the particular sensor parameters, hence the neural sensor is not generic. This work focuses on development of a generic neural oil fraction sensor based on training a Multi-Layer Perceptron (MLP) ANN with various ECT sensor parameters. On average, the proposed oil fraction neural sensor has shown to be able to give a mean absolute error of 3.05% for various ECT sensor sizes. PMID:24064598

Distributive justice and the introduction of generic medicines.

PubMed

Rego, Guilhermina; Brandão, Cristina; Melo, Helena; Nunes, Rui

2002-01-01

All countries face the issue of choice in healthcare. Allocation of healthcare resources is clearly associated with the concept of distributive justice and to the existence of a right to healthcare. Nevertheless, there is still the question of whether this right should include all types of healthcare services or if it should be limited to selected types. It follows that choices must be made, priorities must be set and that efficiency of healthcare services should be maximum. Distributive justice aims at ensuring that everyone has access to necessary care based on the substantive ethical principles of equity and solidarity. Resource allocation is paramount in public policy particularly with regards pharmacoeconomics. The objective of this study is to determine the leading issues regarding the marketing and trade of generic medicines analysing the reasons why there are huge disparities between European countries with regards generic drugs acceptance by practitioners. Distributive justice aims at ensuring that everyone has access to reasonable care based on the ethical principles of equity and solidarity. However, universality implies always choice in access and efficiency in delivery. It follows that resource allocation is instrumental in public policy particularly with regards pharmacoeconomics. The acceptance of distributive justice as a new ethical paradigm for professional ethics implies that as long as the best interest of the patient is not at stake physicians should regard the use of generic drugs as a valid instrument to promote the efficiency of the system and therefore as a way to facilitate citizen's global access to healthcare.

Parametric study of the dynamic JWL-EOS for detonation products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Urtiew, P.A.; Hayes, B.

1990-03-01

The JWL equation of state describing the adiabatic expansion of detonation products is revisited to complete the description of the principal eigenvalue, to reset the secondary eigenvalue to produce a well-behaved adiabatic gamma profile, and to normalize the characteristic equation of state in terms of conventional parameters having a clear experimental interpretation. This is accomplished by interjecting a dynamic flow condition concerning the value of the relative specific volume when the particle velocity of the detonation products is zero. In addition, a set of generic parameters based on the statistical distribution of the primary explosives making up the available datamore » base is presented. Unlike theoretical and statistical mechanical models, the adiabatic gamma function for these materials is seen to have a positive initial slope in accord with experimental findings. 10 refs., 4 figs.« less

Analysis of Large-scale Anisotropy of Ultra-high Energy Cosmic Rays in HiRes Data

NASA Astrophysics Data System (ADS)

Abbasi, R. U.; Abu-Zayyad, T.; Allen, M.; Amann, J. F.; Archbold, G.; Belov, K.; Belz, J. W.; Bergman, D. R.; Blake, S. A.; Brusova, O. A.; Burt, G. W.; Cannon, C.; Cao, Z.; Deng, W.; Fedorova, Y.; Findlay, J.; Finley, C. B.; Gray, R. C.; Hanlon, W. F.; Hoffman, C. M.; Holzscheiter, M. H.; Hughes, G.; Hüntemeyer, P.; Ivanov, D.; Jones, B. F.; Jui, C. C. H.; Kim, K.; Kirn, M. A.; Koers, H.; Loh, E. C.; Maestas, M. M.; Manago, N.; Marek, L. J.; Martens, K.; Matthews, J. A. J.; Matthews, J. N.; Moore, S. A.; O'Neill, A.; Painter, C. A.; Perera, L.; Reil, K.; Riehle, R.; Roberts, M. D.; Rodriguez, D.; Sasaki, M.; Schnetzer, S. R.; Scott, L. M.; Sinnis, G.; Smith, J. D.; Sokolsky, P.; Song, C.; Springer, R. W.; Stokes, B. T.; Stratton, S. R.; Thomas, J. R.; Thomas, S. B.; Thomson, G. B.; Tinyakov, P.; Tupa, D.; Wiencke, L. R.; Zech, A.; Zhang, X.; High Resolution Fly's Eye Collaboration

2010-04-01

Stereo data collected by the HiRes experiment over a six-year period are examined for large-scale anisotropy related to the inhomogeneous distribution of matter in the nearby universe. We consider the generic case of small cosmic-ray deflections and a large number of sources tracing the matter distribution. In this matter tracer model the expected cosmic-ray flux depends essentially on a single free parameter, the typical deflection angle θ s . We find that the HiRes data with threshold energies of 40 EeV and 57 EeV are incompatible with the matter tracer model at a 95% confidence level unless θ s > 10° and are compatible with an isotropic flux. The data set above 10 EeV is compatible with both the matter tracer model and an isotropic flux.

Probabilistic Flexural Fatigue in Plain and Fiber-Reinforced Concrete

PubMed Central

Ríos, José D.

2017-01-01

The objective of this work is two-fold. First, we attempt to fit the experimental data on the flexural fatigue of plain and fiber-reinforced concrete with a probabilistic model (Saucedo, Yu, Medeiros, Zhang and Ruiz, Int. J. Fatigue, 2013, 48, 308–318). This model was validated for compressive fatigue at various loading frequencies, but not for flexural fatigue. Since the model is probabilistic, it is not necessarily related to the specific mechanism of fatigue damage, but rather generically explains the fatigue distribution in concrete (plain or reinforced with fibers) for damage under compression, tension or flexion. In this work, more than 100 series of flexural fatigue tests in the literature are fit with excellent results. Since the distribution of monotonic tests was not available in the majority of cases, a two-step procedure is established to estimate the model parameters based solely on fatigue tests. The coefficient of regression was more than 0.90 except for particular cases where not all tests were strictly performed under the same loading conditions, which confirms the applicability of the model to flexural fatigue data analysis. Moreover, the model parameters are closely related to fatigue performance, which demonstrates the predictive capacity of the model. For instance, the scale parameter is related to flexural strength, which improves with the addition of fibers. Similarly, fiber increases the scattering of fatigue life, which is reflected by the decreasing shape parameter. PMID:28773123

Probabilistic Flexural Fatigue in Plain and Fiber-Reinforced Concrete.

PubMed

Ríos, José D; Cifuentes, Héctor; Yu, Rena C; Ruiz, Gonzalo

2017-07-07

The objective of this work is two-fold. First, we attempt to fit the experimental data on the flexural fatigue of plain and fiber-reinforced concrete with a probabilistic model (Saucedo, Yu, Medeiros, Zhang and Ruiz, Int. J. Fatigue, 2013, 48, 308-318). This model was validated for compressive fatigue at various loading frequencies, but not for flexural fatigue. Since the model is probabilistic, it is not necessarily related to the specific mechanism of fatigue damage, but rather generically explains the fatigue distribution in concrete (plain or reinforced with fibers) for damage under compression, tension or flexion. In this work, more than 100 series of flexural fatigue tests in the literature are fit with excellent results. Since the distribution of monotonic tests was not available in the majority of cases, a two-step procedure is established to estimate the model parameters based solely on fatigue tests. The coefficient of regression was more than 0.90 except for particular cases where not all tests were strictly performed under the same loading conditions, which confirms the applicability of the model to flexural fatigue data analysis. Moreover, the model parameters are closely related to fatigue performance, which demonstrates the predictive capacity of the model. For instance, the scale parameter is related to flexural strength, which improves with the addition of fibers. Similarly, fiber increases the scattering of fatigue life, which is reflected by the decreasing shape parameter.

Buckling Behavior of Long Anisotropic Plates Subjected to Fully Restrained Thermal Expansion

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

2003-01-01

An approach for synthesizing buckling results and behavior for thin, balanced and unbalanced symmetric laminates that are subjected to uniform heating or cooling and which are fully-restrained against thermal expansion or contraction is presented. This approach uses a nondimensional analysis for infinitely long, flexurally anisotropic plates that are subjected to combined mechanical loads and is based on useful nondimensional parameters. In addition, stiffness-weighted laminate thermal-expansion parameters are derived and used to determine critical temperature changes in terms of physically intuitive mechanical buckling coefficients. The effects of membrane orthotropy and anisotropy are included. Many results are presented for some common laminates that are intended to facilitate a structural designer's transition to the use of the generic buckling design curves that are presented in the paper. Several generic buckling design curves are presented that provide physical insight into buckling response and provide useful design data. Examples are presented that demonstrate the use of generic design curves. The analysis approach and generic results indicate the effects and characteristics of laminate thermal expansion, membrane orthotropy and anisotropy, and flexural orthotropy and anisotropy in a very general, unifying manner.

Distributed parameter modeling of repeated truss structures

NASA Technical Reports Server (NTRS)

Wang, Han-Ching

1994-01-01

A new approach to find homogeneous models for beam-like repeated flexible structures is proposed which conceptually involves two steps. The first step involves the approximation of 3-D non-homogeneous model by a 1-D periodic beam model. The structure is modeled as a 3-D non-homogeneous continuum. The displacement field is approximated by Taylor series expansion. Then, the cross sectional mass and stiffness matrices are obtained by energy equivalence using their additive properties. Due to the repeated nature of the flexible bodies, the mass, and stiffness matrices are also periodic. This procedure is systematic and requires less dynamics detail. The first step involves the homogenization from a 1-D periodic beam model to a 1-D homogeneous beam model. The periodic beam model is homogenized into an equivalent homogeneous beam model using the additive property of compliance along the generic axis. The major departure from previous approaches in literature is using compliance instead of stiffness in homogenization. An obvious justification is that the stiffness is additive at each cross section but not along the generic axis. The homogenized model preserves many properties of the original periodic model.

Interval Estimation of Seismic Hazard Parameters

NASA Astrophysics Data System (ADS)

Orlecka-Sikora, Beata; Lasocki, Stanislaw

2017-03-01

The paper considers Poisson temporal occurrence of earthquakes and presents a way to integrate uncertainties of the estimates of mean activity rate and magnitude cumulative distribution function in the interval estimation of the most widely used seismic hazard functions, such as the exceedance probability and the mean return period. The proposed algorithm can be used either when the Gutenberg-Richter model of magnitude distribution is accepted or when the nonparametric estimation is in use. When the Gutenberg-Richter model of magnitude distribution is used the interval estimation of its parameters is based on the asymptotic normality of the maximum likelihood estimator. When the nonparametric kernel estimation of magnitude distribution is used, we propose the iterated bias corrected and accelerated method for interval estimation based on the smoothed bootstrap and second-order bootstrap samples. The changes resulted from the integrated approach in the interval estimation of the seismic hazard functions with respect to the approach, which neglects the uncertainty of the mean activity rate estimates have been studied using Monte Carlo simulations and two real dataset examples. The results indicate that the uncertainty of mean activity rate affects significantly the interval estimates of hazard functions only when the product of activity rate and the time period, for which the hazard is estimated, is no more than 5.0. When this product becomes greater than 5.0, the impact of the uncertainty of cumulative distribution function of magnitude dominates the impact of the uncertainty of mean activity rate in the aggregated uncertainty of the hazard functions. Following, the interval estimates with and without inclusion of the uncertainty of mean activity rate converge. The presented algorithm is generic and can be applied also to capture the propagation of uncertainty of estimates, which are parameters of a multiparameter function, onto this function.

Baseline Computational Fluid Dynamics Methodology for Longitudinal-Mode Liquid-Propellant Rocket Combustion Instability

NASA Technical Reports Server (NTRS)

Litchford, R. J.

2005-01-01

A computational method for the analysis of longitudinal-mode liquid rocket combustion instability has been developed based on the unsteady, quasi-one-dimensional Euler equations where the combustion process source terms were introduced through the incorporation of a two-zone, linearized representation: (1) A two-parameter collapsed combustion zone at the injector face, and (2) a two-parameter distributed combustion zone based on a Lagrangian treatment of the propellant spray. The unsteady Euler equations in inhomogeneous form retain full hyperbolicity and are integrated implicitly in time using second-order, high-resolution, characteristic-based, flux-differencing spatial discretization with Roe-averaging of the Jacobian matrix. This method was initially validated against an analytical solution for nonreacting, isentropic duct acoustics with specified admittances at the inflow and outflow boundaries. For small amplitude perturbations, numerical predictions for the amplification coefficient and oscillation period were found to compare favorably with predictions from linearized small-disturbance theory as long as the grid exceeded a critical density (100 nodes/wavelength). The numerical methodology was then exercised on a generic combustor configuration using both collapsed and distributed combustion zone models with a short nozzle admittance approximation for the outflow boundary. In these cases, the response parameters were varied to determine stability limits defining resonant coupling onset.

Identification of intestinal loss of a drug through physiologically based pharmacokinetic simulation of plasma concentration-time profiles.

PubMed

Peters, Sheila Annie

2008-01-01

Despite recent advances in understanding of the role of the gut as a metabolizing organ, recognition of gut wall metabolism and/or other factors contributing to intestinal loss of a compound has been a challenging task due to the lack of well characterized methods to distinguish it from first-pass hepatic extraction. The implications of identifying intestinal loss of a compound in drug discovery and development can be enormous. Physiologically based pharmacokinetic (PBPK) simulations of pharmacokinetic profiles provide a simple, reliable and cost-effective way to understand the mechanisms underlying pharmacokinetic processes. The purpose of this article is to demonstrate the application of PBPK simulations in bringing to light intestinal loss of orally administered drugs, using two example compounds: verapamil and an in-house compound that is no longer in development (referred to as compound A in this article). A generic PBPK model, built in-house using MATLAB software and incorporating absorption, metabolism, distribution, biliary and renal elimination models, was employed for simulation of concentration-time profiles. Modulation of intrinsic hepatic clearance and tissue distribution parameters in the generic PBPK model was done to achieve a good fit to the observed intravenous pharmacokinetic profiles of the compounds studied. These optimized clearance and distribution parameters are expected to be invariant across different routes of administration, as long as the kinetics are linear, and were therefore employed to simulate the oral profiles of the compounds. For compounds with reasonably good solubility and permeability, an area under the concentration-time curve for the simulated oral profile that far exceeded the observed would indicate some kind of loss in the intestine. PBPK simulations applied to compound A showed substantial loss of the compound in the gastrointestinal tract in humans but not in rats. This accounted for the lower bioavailability of the compound in humans than in rats. PBPK simulations of verapamil identified gut wall metabolism, well established in the literature, and showed large interspecies differences with respect to both gut wall metabolism and drug-induced delays in gastric emptying. Mechanistic insights provided by PBPK simulations can be very valuable in answering vital questions in drug discovery and development. However, such applications of PBPK models are limited by the lack of accurate inputs for clearance and distribution. This article demonstrates a successful application of PBPK simulations to identify and quantify intestinal loss of two model compounds in rats and humans. The limitation of inaccurate inputs for the clearance and distribution parameters was overcome by optimizing these parameters through fitting intravenous profiles. The study also demonstrated that the large interspecies differences associated with gut wall metabolism and gastric emptying, evident for the compounds studied, make animal model extrapolations to humans unreliable. It is therefore important to do PBPK simulations of human pharmacokinetic profiles to understand the relevance of intestinal loss of a compound in humans.

Digoxin: use pattern in Estonia and bioavailability of the local market leader.

PubMed

Pähkla, R; Irs, A; Oselin, K; Rootslane, L

1999-10-01

In comparison with neighbouring Scandinavian countries, the use of digoxin in Estonia is high. The present study was carried out to determine the use pattern of digoxin in Estonia and bioavailability of the local market leader preparation in comparison with Lanoxin. Drug use data were evaluated from the annual reports of wholesale companies. For the bioequivalence study, a single-blind cross-over randomised two-way single-dose comparative bioavailability study was performed using 14 healthy volunteers. Digoxin concentrations in serum samples and urine were measured by chemiluminescent competitive immunoassay. The use of digoxin in Estonia has increased by 35% during the period 1994-97. The steady market leader was the local generic drug. No statistically significant differences were found in any pharmacokinetic parameter between the generic preparation and Lanoxin. All parameters showed considerable variability. The total amount of drug excreted was the parameter with lowest inter- individual variation. The present study indicates that the generic digoxin preparation studied is bioequivalent to Lanoxin. The increasing use of digoxin in Estonia is not caused by low bioavailability of the local market leader but by therapeutic traditions.

Automatic control system generation for robot design validation

NASA Technical Reports Server (NTRS)

Bacon, James A. (Inventor); English, James D. (Inventor)

2012-01-01

The specification and drawings present a new method, system and software product for and apparatus for generating a robotic validation system for a robot design. The robotic validation system for the robot design of a robotic system is automatically generated by converting a robot design into a generic robotic description using a predetermined format, then generating a control system from the generic robotic description and finally updating robot design parameters of the robotic system with an analysis tool using both the generic robot description and the control system.

[General awareness and use of generic medication among citizens of Tubarão, state of Santa Catarina, Brazil].

PubMed

Blatt, Carine Raquel; Trauthman, Silvana Cristina; Schmidt, Edegar Henrique; Marchesan, Samuel; da Silva, Luana May; Martins, João Luiz

2012-01-01

Although generic medication has been introduced in the country to offer an accessible alternative to brand-name medication, it represents only 14% of sales in number of units within the pharmaceutical market. The aim of this work was to research the level of awareness and the use of generic products among residents of the municipality of Tubarão, State of Santa Catarina, Brazil. A transversal study was carried out with a sample of 234 interviewees, distributed among municipal areas. With regard to use, the majority of those interviewed had used generic medication, and half of them had at least one such product in their home. To verify awareness of different types of medication, pictures with the generic, brand name and similar packaging for paracetamol and atenolol were shown and 91% were able to identify all products correctly. To be of higher economic standing, already having used generic products, believing that the generic medication has the same effect as the brand name medication, finding generic products in drugstores easily and being accustomed to buy generic products, were factors that were positively associated with the correct identification.

Architectural Optimization of Digital Libraries

NASA Technical Reports Server (NTRS)

Biser, Aileen O.

1998-01-01

This work investigates performance and scaling issues relevant to large scale distributed digital libraries. Presently, performance and scaling studies focus on specific implementations of production or prototype digital libraries. Although useful information is gained to aid these designers and other researchers with insights to performance and scaling issues, the broader issues relevant to very large scale distributed libraries are not addressed. Specifically, no current studies look at the extreme or worst case possibilities in digital library implementations. A survey of digital library research issues is presented. Scaling and performance issues are mentioned frequently in the digital library literature but are generally not the focus of much of the current research. In this thesis a model for a Generic Distributed Digital Library (GDDL) and nine cases of typical user activities are defined. This model is used to facilitate some basic analysis of scaling issues. Specifically, the calculation of Internet traffic generated for different configurations of the study parameters and an estimate of the future bandwidth needed for a large scale distributed digital library implementation. This analysis demonstrates the potential impact a future distributed digital library implementation would have on the Internet traffic load and raises questions concerning the architecture decisions being made for future distributed digital library designs.

Generic Raman-based calibration models enabling real-time monitoring of cell culture bioreactors.

PubMed

Mehdizadeh, Hamidreza; Lauri, David; Karry, Krizia M; Moshgbar, Mojgan; Procopio-Melino, Renee; Drapeau, Denis

2015-01-01

Raman-based multivariate calibration models have been developed for real-time in situ monitoring of multiple process parameters within cell culture bioreactors. Developed models are generic, in the sense that they are applicable to various products, media, and cell lines based on Chinese Hamster Ovarian (CHO) host cells, and are scalable to large pilot and manufacturing scales. Several batches using different CHO-based cell lines and corresponding proprietary media and process conditions have been used to generate calibration datasets, and models have been validated using independent datasets from separate batch runs. All models have been validated to be generic and capable of predicting process parameters with acceptable accuracy. The developed models allow monitoring multiple key bioprocess metabolic variables, and hence can be utilized as an important enabling tool for Quality by Design approaches which are strongly supported by the U.S. Food and Drug Administration. © 2015 American Institute of Chemical Engineers.

Freeze-in through portals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blennow, Mattias; Fernandez-Martínez, Enrique; Zaldívar, Bryan, E-mail: emb@kth.se, E-mail: enrique.fernandez-martinez@uam.es, E-mail: b.zaldivar.m@csic.es

2014-01-01

The popular freeze-out paradigm for Dark Matter (DM) production, relies on DM-baryon couplings of the order of the weak interactions. However, different search strategies for DM have failed to provide a conclusive evidence of such (non-gravitational) interactions, while greatly reducing the parameter space of many representative models. This motivates the study of alternative mechanisms for DM genesis. In the freeze-in framework, the DM is slowly populated from the thermal bath while never reaching equilibrium. In this work, we analyse in detail the possibility of producing a frozen-in DM via a mediator particle which acts as a portal. We give analyticalmore » estimates of different freeze-in regimes and support them with full numerical analyses, taking into account the proper distribution functions of bath particles. Finally, we constrain the parameter space of generic models by requiring agreement with DM relic abundance observations.« less

Social judgment theory based model on opinion formation, polarization and evolution

NASA Astrophysics Data System (ADS)

Chau, H. F.; Wong, C. Y.; Chow, F. K.; Fung, Chi-Hang Fred

2014-12-01

The dynamical origin of opinion polarization in the real world is an interesting topic that physical scientists may help to understand. To properly model the dynamics, the theory must be fully compatible with findings by social psychologists on microscopic opinion change. Here we introduce a generic model of opinion formation with homogeneous agents based on the well-known social judgment theory in social psychology by extending a similar model proposed by Jager and Amblard. The agents’ opinions will eventually cluster around extreme and/or moderate opinions forming three phases in a two-dimensional parameter space that describes the microscopic opinion response of the agents. The dynamics of this model can be qualitatively understood by mean-field analysis. More importantly, first-order phase transition in opinion distribution is observed by evolving the system under a slow change in the system parameters, showing that punctuated equilibria in public opinion can occur even in a fully connected social network.

Autonomic Management in a Distributed Storage System

NASA Astrophysics Data System (ADS)

Tauber, Markus

2010-07-01

This thesis investigates the application of autonomic management to a distributed storage system. Effects on performance and resource consumption were measured in experiments, which were carried out in a local area test-bed. The experiments were conducted with components of one specific distributed storage system, but seek to be applicable to a wide range of such systems, in particular those exposed to varying conditions. The perceived characteristics of distributed storage systems depend on their configuration parameters and on various dynamic conditions. For a given set of conditions, one specific configuration may be better than another with respect to measures such as resource consumption and performance. Here, configuration parameter values were set dynamically and the results compared with a static configuration. It was hypothesised that under non-changing conditions this would allow the system to converge on a configuration that was more suitable than any that could be set a priori. Furthermore, the system could react to a change in conditions by adopting a more appropriate configuration. Autonomic management was applied to the peer-to-peer (P2P) and data retrieval components of ASA, a distributed storage system. The effects were measured experimentally for various workload and churn patterns. The management policies and mechanisms were implemented using a generic autonomic management framework developed during this work. The experimental evaluations of autonomic management show promising results, and suggest several future research topics. The findings of this thesis could be exploited in building other distributed storage systems that focus on harnessing storage on user workstations, since these are particularly likely to be exposed to varying, unpredictable conditions.

Locking of length scales in two-band superconductors

DOE PAGES

Ichioka, M.; Kogan, Vladimir G.; Schmalian, J.

2017-02-21

Here, a model of a clean two-band s-wave superconductor with cylindrical Fermi surfaces, different Fermi velocities v 1,2, and a general 2×2 coupling matrix V αβ is used to study the order parameter distribution in vortex lattices. The Eilenberger weak coupling formalism is used to calculate numerically the spatial distributions of the pairing amplitudes Δ 1 and Δ 2 of the two bands for vortices parallel to the Fermi cylinders. For generic values of the interband coupling V 12, it is shown that, independently of the couplings V αβ, of the ratio v 1/v 2, of the temperature, and themore » applied field, the length scales of spatial variation of Δ 1 and of Δ 2 are the same within the accuracy of our calculations. The only exception from this single length-scale behavior is found for V 12 << V 11, i.e., for nearly decoupled bands.« less

ANALYSIS OF LARGE-SCALE ANISOTROPY OF ULTRA-HIGH ENERGY COSMIC RAYS IN HiRes DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abbasi, R. U.; Abu-Zayyad, T.; Allen, M.

2010-04-10

Stereo data collected by the HiRes experiment over a six-year period are examined for large-scale anisotropy related to the inhomogeneous distribution of matter in the nearby universe. We consider the generic case of small cosmic-ray deflections and a large number of sources tracing the matter distribution. In this matter tracer model the expected cosmic-ray flux depends essentially on a single free parameter, the typical deflection angle {theta} {sub s}. We find that the HiRes data with threshold energies of 40 EeV and 57 EeV are incompatible with the matter tracer model at a 95% confidence level unless {theta} {sub s}more » > 10 deg. and are compatible with an isotropic flux. The data set above 10 EeV is compatible with both the matter tracer model and an isotropic flux.« less

Structure and haemostatic effects of generic versions of enoxaparin available for clinical use in Brazil: similarity to the original drug.

PubMed

Glauser, Bianca F; Vairo, Bruno C; Oliveira, Stephan-Nicollas M C G; Cinelli, Leonardo P; Pereira, Mariana S; Mourão, Paulo A S

2012-02-01

Patent protection for enoxaparin has expired. Generic preparations are developed and approved for clinical use in different countries. However, there is still skepticism about the possibility of making an exact copy of the original drug due to the complex processes involved in generating low-molecular-weight heparins. We have undertaken a careful analysis of generic versions of enoxaparin available for clinical use in Brazil. Thirty-three batches of active ingredient and 70 of the final pharmaceutical product were obtained from six different suppliers. They were analysed for their chemical composition, molecular size distribution, in vitro anticoagulant activity and pharmacological effects on animal models of experimental thrombosis and bleeding. Clearly, the generic versions of enoxaparin available for clinical use in Brazil are similar to the original drug. Only three out of 33 batches of active ingredient from one supplier showed differences in molecular size distribution, resulting from a low percentage of tetrasaccharide or the presence of a minor component eluted as monosaccharide. Three out of 70 batches of the final pharmaceutical products contained lower amounts of the active ingredient than that declared by the suppliers. Our results suggest that the generic versions of enoxaparin are a viable therapeutic option, but their use requires strict regulations to ensure accurate standards.

Top-quark pairs at high invariant mass: a model-independent discriminator of new physics at the Large Hadron Collider.

PubMed

Barger, Vernon; Han, Tao; Walker, Devin G E

2008-01-25

We study top-quark pair production to probe new physics at the CERN Large Hadron Collider. We propose reconstruction methods for tt[over] semileptonic events and use them to reconstruct the tt[over] invariant mass. The angular distribution of top quarks in their c.m. frame can determine the spin and production subprocess for each new physics resonance. Forward-backward asymmetry and CP-odd variables can be constructed to further delineate the nature of new physics. We parametrize the new resonances with a few generic parameters and show high invariant mass top pair production may provide an early indicator for new physics beyond the standard model.

The Practices of Students' Generic Skills among Economics Students at National University of Indonesia

ERIC Educational Resources Information Center

Hadiyanto; Suratno

2015-01-01

This study aimed to examine students' generic skills practices (communication, IT, numeracy, learning how to learn, problem solving, working with others, and subject-specific competencies) at National University of Indonesia (UI). Survey design with quantitative method was applied in this study. Questionnaires were distributed to 355 students at…

Generic-distributed framework for cloud services marketplace based on unified ontology.

PubMed

Hasan, Samer; Valli Kumari, V

2017-11-01

Cloud computing is a pattern for delivering ubiquitous and on demand computing resources based on pay-as-you-use financial model. Typically, cloud providers advertise cloud service descriptions in various formats on the Internet. On the other hand, cloud consumers use available search engines (Google and Yahoo) to explore cloud service descriptions and find the adequate service. Unfortunately, general purpose search engines are not designed to provide a small and complete set of results, which makes the process a big challenge. This paper presents a generic-distrusted framework for cloud services marketplace to automate cloud services discovery and selection process, and remove the barriers between service providers and consumers. Additionally, this work implements two instances of generic framework by adopting two different matching algorithms; namely dominant and recessive attributes algorithm borrowed from gene science and semantic similarity algorithm based on unified cloud service ontology. Finally, this paper presents unified cloud services ontology and models the real-life cloud services according to the proposed ontology. To the best of the authors' knowledge, this is the first attempt to build a cloud services marketplace where cloud providers and cloud consumers can trend cloud services as utilities. In comparison with existing work, semantic approach reduced the execution time by 20% and maintained the same values for all other parameters. On the other hand, dominant and recessive attributes approach reduced the execution time by 57% but showed lower value for recall.

Experimental Aspects in Beam Characterization

NASA Astrophysics Data System (ADS)

Sona, Alberto

2004-08-01

Beam characterization is the pre-requisite of any research exploiting light beams, especially in cases involving laser beams. One can rely on the beam parameters provided by the manufacturer but often they are inadequate and/or not sufficient for the experimental data analysis. The full characterization of a laser beam can require the determination of many parameters (about ten for a generic beam); however for symmetrical beams the significant ones can reduce to only to a few. The characterization can be performed with the accuracy requested by the application and limited to the relevant parameters. The main parameters of interest will be defined and the measurement procedures and equipment will be discussed. The ISO standards consider the following parameters mainly of interest for industrial applications: 1) Beam widths, divergence angle and beam propagation ratio. 2) Power, energy density distribution 3) Parameters for stigmatic and simple astigmatic beams 4) Parameters for general astigmatic beams 5) Geometrical laser beams classification and propagation 6) Power, energy and temporal characteristics 7) Beam positional stability 8) Beam polarization 9) Spectral characteristics 10) Shape of a laser wavefront: Phase distribution All the above points will be briefly discussed as regards the experimental problems involved. Special attention will be given to the methods for measuring the intensity distribution and to the related instrumentation to derive the Beam propagation ratio, the Beam Quality factor M2 or the Beam Parameters Product. Examples of the parameters relevance for specific applications will be given. Depending on the spectral range, specific detectors are used: CCD cameras with detector arrays in the visible and near infrared, thermocameras with a single detector and scanning system for the medium and far IR. The major problems in data collection and processing will be discussed. Another new and not yet fully investigated area is the characterization of laser beam by wavefront measuring instruments. One possible approach is the use of self-referencing interferometers such as the point diffraction interferometers. Alternatively wavefront gradient measuring instruments can be used such as the Hartmann-Shack sensors. Wavefront intensity and phase joint distributions can now be measured at the same time. This can provide in addition new methods to derive the modal content. A short review of the experimental problems in this area still looking for a practical solution will be given. Note from Publisher: This article contains the abstract and references only.

Buckling Behavior of Long Anisotropic Plates Subjected to Fully Restrained Thermal Expansion

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

2001-01-01

An approach for synthesizing buckling results and behavior for thin balanced and unbalanced symmetric laminates that are subjected to uniform heating or cooling and fully restrained against thermal expansion or contraction is presented. This approach uses a nondimensional analysis for infinitely long, flexurally anisotropic plates that are subjected to combined mechanical loads and is based on useful nondimensional parameters. In addition, stiffness-weighted laminate thermal-expansion parameters are derived that are used to determine critical temperatures in terms of physically intuitive mechanical buckling coefficients, and the effects of membrane orthotropy and membrane anisotropy are included. Many results are presented for some common laminates that are intended to facilitate a structural designer's transition to the use of the generic buckling design curves that are presented in the paper. Several generic buckling design curves are presented that provide physical insight into the buckling response in addition to providing useful design data. Examples are presented that demonstrate the use of the generic design curves. The analysis approach and generic results indicate the effects and characteristics of laminate thermal expansion, membrane orthotropy and anisotropy, and flexural orthotropy and anisotropy in a very general and unifying manner.

Acquisition system for the "EMSO Generic Instrument Module" (EGIM) and analysis of the data obtained during its first deployment at OBSEA site (Spain)

NASA Astrophysics Data System (ADS)

Garcia, Oscar; Mihai Toma, Daniel; Dañobeitia, Juanjo; del Rio, Joaquin; Bartolome, Rafael; Martínez, Enoc; Nogueras, Marc; Bghiel, Ikram; Lanteri, Nadine; Rolin, Jean Francois; Beranzoli, Laura; Favali, Paolo

2017-04-01

The EMSODEV project (EMSO implementation and operation: DEVelopment of instrument module) is an Horizon-2020 UE project whose overall objective is the operation of eleven seafloor observatories and four test sites. These infrastructures are distributed throughout European seas, from the Arctic across the Atlantic and the Mediterranean to the Black Sea, and are managed by the European consortium EMSO-ERIC (European Research Infrastructure Consortium) with the participation of 8 European countries and other associated partners. Recently, we have implemented a Generic Sensor Module (EGIM) within the EMSO-ERIC distributed marine research infrastructure. EGIM is able to operate on any EMSO observatory node, mooring line, seabed station, cabled or non-cabled and surface buoy. The main role of EGIM is to measure homogeneously a set of core variables using the same hardware, sensor references, qualification methods, calibration methods, data format and access, maintenance procedures in several European ocean locations. The EGIM module acquires a wide range of ocean parameters in a long-term consistent, accurate and comparable manner from disciplines such as biology, geology, chemistry, physics, engineering, and computer science, from polar to subtropical environments, through the water column down to the deep sea. Our work includes developing standard-compliant generic software for Sensor Web Enablement (SWE) on EGIM and to perform the first onshore and offshore test bench, to support the sensors data acquisition on a new interoperable EGIM system. EGIM in its turn is linked to an acquisition drives processes, a centralized Sensor Observation Service (SOS) server and a laboratory monitor system (LabMonitor) that records events and alarms during acquisition. The measurements recorded along EMSO NODES are essential to accurately respond to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards. This presentation shows the first EGIM deployment and the SWE infrastructure, developed to manage the data acquisition from the underwater sensors and their insertion to the SOS interface.

Generics market in Greece: the pharmaceutical industry's beliefs.

PubMed

Geitona, Mary; Zavras, Dimitrios; Hatzikou, Magda; Kyriopoulos, John

2006-11-01

The aim of this study was to investigate the beliefs and perspectives of the pharmaceutical industry on generic medication in Greece. Questionnaires were mailed to all 58 members of the Hellenic Association of Pharmaceutical Companies from November 2002 to February 2003. The response rate was 52%, namely 30 questionnaires were completed and returned. The questionnaire requested information on companies' involvement in generics, their opinion on generics' characteristics and on public policies affecting the demand and supply of generic medication. A descriptive analysis of the outcomes, that is percentage comparison through binomial tests and Fisher tests, was performed. According to our findings, 43% of the respondents were involved in the production and distribution of generics and the mean period of their involvement was 12 years. The majority of the respondents were in favor of their companies' involvement in generics, despite the relatively small market share of generics in Greece; 9.7% of total pharmaceutical market in 2003. Bearing in mind that in Greece the promotion of generics is not encouraged, pharmaceutical companies believe that the mandatory introduction of bioequivalence studies is an indirect promotional strategy towards generics. Additionally, the majority declared that their main competitive advantages are their safety, efficacy and effectiveness as well as their economic benefit to the society. Finally, the respondents expressed their preference for the introduction of pharmacoeconomic submissions for drugs' reimbursement by social insurance funds.

A period-doubling cascade precedes chaos for planar maps.

PubMed

Sander, Evelyn; Yorke, James A

2013-09-01

A period-doubling cascade is often seen in numerical studies of those smooth (one-parameter families of) maps for which as the parameter is varied, the map transitions from one without chaos to one with chaos. Our emphasis in this paper is on establishing the existence of such a cascade for many maps with phase space dimension 2. We use continuation methods to show the following: under certain general assumptions, if at one parameter there are only finitely many periodic orbits, and at another parameter value there is chaos, then between those two parameter values there must be a cascade. We investigate only families that are generic in the sense that all periodic orbit bifurcations are generic. Our method of proof in showing there is one cascade is to show there must be infinitely many cascades. We discuss in detail two-dimensional families like those which arise as a time-2π maps for the Duffing equation and the forced damped pendulum equation.

From LCAs to simplified models: a generic methodology applied to wind power electricity.

PubMed

Padey, Pierryves; Girard, Robin; le Boulch, Denis; Blanc, Isabelle

2013-02-05

This study presents a generic methodology to produce simplified models able to provide a comprehensive life cycle impact assessment of energy pathways. The methodology relies on the application of global sensitivity analysis to identify key parameters explaining the impact variability of systems over their life cycle. Simplified models are built upon the identification of such key parameters. The methodology is applied to one energy pathway: onshore wind turbines of medium size considering a large sample of possible configurations representative of European conditions. Among several technological, geographical, and methodological parameters, we identified the turbine load factor and the wind turbine lifetime as the most influent parameters. Greenhouse Gas (GHG) performances have been plotted as a function of these key parameters identified. Using these curves, GHG performances of a specific wind turbine can be estimated, thus avoiding the undertaking of an extensive Life Cycle Assessment (LCA). This methodology should be useful for decisions makers, providing them a robust but simple support tool for assessing the environmental performance of energy systems.

The generic unfolding of a codimension-two connection to a two-fold singularity of planar Filippov systems

NASA Astrophysics Data System (ADS)

Novaes, Douglas D.; Teixeira, Marco A.; Zeli, Iris O.

2018-05-01

Generic bifurcation theory was classically well developed for smooth differential systems, establishing results for k-parameter families of planar vector fields. In the present study we focus on a qualitative analysis of 2-parameter families, , of planar Filippov systems assuming that Z 0,0 presents a codimension-two minimal set. Such object, named elementary simple two-fold cycle, is characterized by a regular trajectory connecting a visible two-fold singularity to itself, for which the second derivative of the first return map is nonvanishing. We analyzed the codimension-two scenario through the exhibition of its bifurcation diagram.

Discovery of Neopanorpa chillcotti Byers (Mecoptera: Panorpidae) from Tibet, China, with discussion of its generic status.

PubMed

Wang, Meng; Hua, Bao-Zhen

2017-02-15

Neopanorpa chillcotti Byers, 1971 was originally described from Kathmandu in Nepal and is now found to be distributed in Gyirong, Tibet in China. The species is redescribed and illustrated based on new material from China and Nepal. The generic status of this species is briefly discussed.

Spatio-Temporal Analysis of Urban Acoustic Environments with Binaural Psycho-Acoustical Considerations for IoT-Based Applications.

PubMed

Segura-Garcia, Jaume; Navarro-Ruiz, Juan Miguel; Perez-Solano, Juan J; Montoya-Belmonte, Jose; Felici-Castell, Santiago; Cobos, Maximo; Torres-Aranda, Ana M

2018-02-26

Sound pleasantness or annoyance perceived in urban soundscapes is a major concern in environmental acoustics. Binaural psychoacoustic parameters are helpful to describe generic acoustic environments, as it is stated within the ISO 12913 framework. In this paper, the application of a Wireless Acoustic Sensor Network (WASN) to evaluate the spatial distribution and the evolution of urban acoustic environments is described. Two experiments are presented using an indoor and an outdoor deployment of a WASN with several nodes using an Internet of Things (IoT) environment to collect audio data and calculate meaningful parameters such as the sound pressure level, binaural loudness and binaural sharpness. A chunk of audio is recorded in each node periodically with a microphone array and the binaural rendering is conducted by exploiting the estimated directional characteristics of the incoming sound by means of DOA estimation. Each node computes the parameters in a different location and sends the values to a cloud-based broker structure that allows spatial statistical analysis through Kriging techniques. A cross-validation analysis is also performed to confirm the usefulness of the proposed system.

Distribution pattern of public transport passenger in Yogyakarta, Indonesia

NASA Astrophysics Data System (ADS)

Narendra, Alfa; Malkhamah, Siti; Sopha, Bertha Maya

2018-03-01

The arrival and departure distribution pattern of Trans Jogja bus passenger is one of the fundamental model for simulation. The purpose of this paper is to build models of passengers flows. This research used passengers data from January to May 2014. There is no policy that change the operation system affecting the nature of this pattern nowadays. The roads, buses, land uses, schedule, and people are relatively still the same. The data then categorized based on the direction, days, and location. Moreover, each category was fitted into some well-known discrete distributions. Those distributions are compared based on its AIC value and BIC. The chosen distribution model has the smallest AIC and BIC value and the negative binomial distribution found has the smallest AIC and BIC value. Probability mass function (PMF) plots of those models were compared to draw generic model from each categorical negative binomial distribution models. The value of accepted generic negative binomial distribution is 0.7064 and 1.4504 of mu. The minimum and maximum passenger vector value of distribution are is 0 and 41.

Generic features of the wealth distribution in ideal-gas-like markets.

PubMed

Mohanty, P K

2006-07-01

We provide an exact solution to the ideal-gas-like models studied in econophysics to understand the microscopic origin of Pareto law. In these classes of models the key ingredient necessary for having a self-organized scale-free steady-state distribution is the trading or collision rule where agents or particles save a definite fraction of their wealth or energy and invest the rest for trading. Using a Gibbs ensemble approach we could obtain the exact distribution of wealth in this model. Moreover we show that in this model (a) good savers are always rich and (b) every agent poor or rich invests the same amount for trading. Nonlinear trading rules could alter the generic scenario observed here.

Biogeographical Evidences Help Revealing the Origin of Hainan Island

PubMed Central

Zhu, Hua

2016-01-01

Both the continental or island origin of Hainan, and the Indo-Malaysian or East Asian affinity of its flora, are debatable. In this study, 196 families, 1283 genera and 3894 species of Hainan plants were recognized. Patterns of seed plant distribution were quantified at the generic and the family levels. The floras of Vietnam, and the adjacent Guangxi and Guangdong provinces of mainland China, were compared with Hainan. The results showed that the flora of Hainan Island is dominated by families and genera with tropical distributions. Among its floristic elements, tropical Asian distributions make up 23.85% of the total flora, while East Asian distributions contribute only 3.74%. There are only 7 genera and c. 10% of species endemic to Hainan Island. The Hainan flora has strong similarities to the flora of Vietnam at the family and the generic levels, and also to the flora of Guangxi, but less with the adjacent Guangdong province. The main conclusions are: Hainan’s flora is tropical in nature with a strongly tropical Asian affinity, and it has very low endemism at the generic and species levels, which implies a continental origin. We conjecture that Hainan Island could have been adjacent to northern Vietnam and the Guangxi at least in Eocene. This suggestion is supported by palaeobotanical, palaeomagnetic and volcanism studies. PMID:27055236

Branded versus generic clopidogrel in cardiovascular diseases: a systematic review.

PubMed

Caldeira, Daniel; Fernandes, Ricardo M; Costa, João; David, Cláudio; Sampaio, Cristina; Ferreira, Joaquim J

2013-04-01

In the United States, patent for branded Plavix has recently expired. Some studies have compared branded and generic clopidogrel in terms of pharmacokinetic parameters in healthy volunteers, but data on patients and clinical outcomes are scarce. We aimed to review efficacy and safety data from studies comparing Plavix with generic clopidogrel in patients with cardiovascular disease. Electronic databases were searched (from inception to May 2012) for prospective studies evaluating branded versus generic clopidogrel in patients with cardiovascular diseases. Studies' characteristics and data estimates were retrieved. Pooled risk ratio (RR) and 95% confidence intervals (95% CIs) were estimated through a random-effects model. Three studies evaluating 760 patients were included: 2 randomized controlled trials and 1 cohort study. The RR for major cardiovascular events was 1.01 (95% CI, 0.67-1.52). Incidence of adverse events was similar between Plavix and generic (RR 0.85; 95% CI, 0.49-1.48). The risks of mortality, bleeding, and drug discontinuation were also not different between groups. There are a limited number of studies comparing Plavix and generic clopidogrel in patients with cardiovascular diseases and reporting hard clinical end points. The available evidence is therefore limited and does not support the existence of differences in efficacy or safety between branded and generic clopidogrel.

Transcriptional dynamics with time-dependent reaction rates

NASA Astrophysics Data System (ADS)

Nandi, Shubhendu; Ghosh, Anandamohan

2015-02-01

Transcription is the first step in the process of gene regulation that controls cell response to varying environmental conditions. Transcription is a stochastic process, involving synthesis and degradation of mRNAs, that can be modeled as a birth-death process. We consider a generic stochastic model, where the fluctuating environment is encoded in the time-dependent reaction rates. We obtain an exact analytical expression for the mRNA probability distribution and are able to analyze the response for arbitrary time-dependent protocols. Our analytical results and stochastic simulations confirm that the transcriptional machinery primarily act as a low-pass filter. We also show that depending on the system parameters, the mRNA levels in a cell population can show synchronous/asynchronous fluctuations and can deviate from Poisson statistics.

Genericness of inflation in isotropic loop quantum cosmology.

PubMed

Date, Ghanashyam; Hossain, Golam Mortuza

2005-01-14

Nonperturbative corrections from loop quantum cosmology (LQC) to the scalar matter sector are already known to imply inflation. We prove that the LQC modified scalar field generates exponential inflation in the small scale factor regime, for all positive definite potentials, independent of initial conditions and independent of ambiguity parameters. For positive semidefinite potentials it is always possible to choose, without fine-tuning, a value of one of the ambiguity parameters such that exponential inflation results, provided zeros of the potential are approached at most as a power law in the scale factor. In conjunction with the generic occurrence of bounce at small volumes, particle horizon is absent, thus eliminating the horizon problem of the standard big bang model.

Pharmaceutical Equivalence of Distributed Generic Antiretroviral (ARV) in Asian Settings: The Cross-Sectional Surveillance Study - PEDA Study.

PubMed

Sapsirisavat, Vorapot; Vongsutilers, Vorasit; Thammajaruk, Narukjaporn; Pussadee, Kanitta; Riyaten, Prakit; Kerr, Stephen; Avihingsanon, Anchalee; Phanuphak, Praphan; Ruxrungtham, Kiat

2016-01-01

Ensuring that medicines meet quality standards is mandatory for ensuring safety and efficacy. There have been occasional reports of substandard generic medicines, especially in resource-limiting settings where policies to control quality may be less rigorous. As HIV treatment in Thailand depends mostly on affordable generic antiretrovirals (ARV), we performed quality assurance testing of several generic ARV available from different sources in Thailand and a source from Vietnam. We sampled Tenofovir 300mg, Efavirenz 600mg and Lopinavir/ritonavir 200/50mg from 10 primary hospitals randomly selected from those participating in the National AIDS Program, 2 non-government organization ARV clinics, and 3 private drug stores. Quality of ARV was analyzed by blinded investigators at the Faculty of Pharmaceutical Science, Chulalongkorn University. The analysis included an identification test for drug molecules, a chemical composition assay to quantitate the active ingredients, a uniformity of mass test and a dissolution test to assess in-vitro drug release. Comparisons were made against the standards described in the WHO international pharmacopeia. A total of 42 batches of ARV from 15 sources were sampled from January-March 2015. Among those generics, 23, 17, 1, and 1 were Thai-made, Indian-made, Vietnamese-made and Chinese-made, respectively. All sampled products, regardless of manufacturers or sources, met the International Pharmacopeia standards for composition assay, mass uniformity and dissolution. Although local regulations restrict ARV supply to hospitals and clinics, samples of ARV could be bought from private drug stores even without formal prescription. Sampled generic ARVs distributed within Thailand and 1 Vietnamese pharmacy showed consistent quality. However some products were illegally supplied without prescription, highlighting the importance of dispensing ARV for treatment or prevention in facilities where continuity along the HIV treatment and care cascade is available.

Buckling Behavior of Long Anisotropic Plates Subjected to Elastically Restrained Thermal Expansion

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

2002-01-01

An approach for synthesizing buckling results for, and behavior of, thin balanced and unbalanced symmetric laminates that are subjected to uniform heating or cooling and elastically restrained against thermal expansion or contraction is presented. This approach uses a nondimensional analysis for infinitely long, flexurally anisotropic plates that are subjected to combined mechanical loads and is based on useful nondimensional parameters. In addition, stiffness-weighted laminate thermal-expansion parameters and compliance coefficients are derived that are used to determine critical temperatures in terms of physically intuitive mechanical-buckling coefficients. The effects of membrane orthotropy and membrane anisotropy are included in the general formulation. Many results are presented for some common laminates that are intended to facilitate a structural designer's transition to the use of generic buckling design curves. Several curves that illustrate the fundamental parameters used in the analysis are presented, for nine contemporary material systems, that provide physical insight into the buckling response in addition to providing useful design data. Examples are presented that demonstrate the use of generic design curves. The analysis approach and generic results indicate the effects and characteristics of elastically restrained laminate thermal expansion or contraction, membrane orthotropy and anisotropy, and flexural orthotropy and anisotropy in a very general and unifying manner.

A Generic System-Level Framework for Self-Serve Health Monitoring System through Internet of Things (IoT).

PubMed

Ahmed, Mobyen Uddin; Björkman, Mats; Lindén, Maria

2015-01-01

Sensor data are traveling from sensors to a remote server, data is analyzed remotely in a distributed manner, and health status of a user is presented in real-time. This paper presents a generic system-level framework for a self-served health monitoring system through the Internet of Things (IoT) to facilities an efficient sensor data management.

Lightweight filter architecture for energy efficient mobile vehicle localization based on a distributed acoustic sensor network.

PubMed

Kim, Keonwook

2013-08-23

The generic properties of an acoustic signal provide numerous benefits for localization by applying energy-based methods over a deployed wireless sensor network (WSN). However, the signal generated by a stationary target utilizes a significant amount of bandwidth and power in the system without providing further position information. For vehicle localization, this paper proposes a novel proximity velocity vector estimator (PVVE) node architecture in order to capture the energy from a moving vehicle and reject the signal from motionless automobiles around the WSN node. A cascade structure between analog envelope detector and digital exponential smoothing filter presents the velocity vector-sensitive output with low analog circuit and digital computation complexity. The optimal parameters in the exponential smoothing filter are obtained by analytical and mathematical methods for maximum variation over the vehicle speed. For stationary targets, the derived simulation based on the acoustic field parameters demonstrates that the system significantly reduces the communication requirements with low complexity and can be expected to extend the operation time considerably.

Contamination of packaged food by substances migrating from a direct-contact plastic layer: Assessment using a generic quantitative household scale methodology.

PubMed

Vitrac, Olivier; Challe, Blandine; Leblanc, Jean-Charles; Feigenbaum, Alexandre

2007-01-01

The contamination risk in 12 packaged foods by substances released from the plastic contact layer has been evaluated using a novel modeling technique, which predicts the migration that accounts for (i) possible variations in the time of contact between foodstuffs and packaging and (ii) uncertainty in physico-chemical parameters used to predict migration. Contamination data, which are subject to variability and uncertainty, are derived through a stochastic resolution of transport equations, which control the migration into food. Distributions of contact times between packaging materials and foodstuffs were reconstructed from the volumes and frequencies of purchases of a given panel of 6422 households, making assumptions about household storage behaviour. The risk of contamination of the packaged foods was estimated for styrene (a monomer found in polystyrene yogurt pots) and 2,6-di-tert-butyl-4-hydroxytoluene (a representative of the widely used phenolic antioxidants). The results are analysed and discussed regarding sensitivity of the model to the set parameters and chosen assumptions.

Reconstruction of color biomedical images by means of quaternion generic Jacobi-Fourier moments in the framework of polar pixels

PubMed Central

Camacho-Bello, César; Padilla-Vivanco, Alfonso; Toxqui-Quitl, Carina; Báez-Rojas, José Javier

2016-01-01

Abstract. A detailed analysis of the quaternion generic Jacobi-Fourier moments (QGJFMs) for color image description is presented. In order to reach numerical stability, a recursive approach is used during the computation of the generic Jacobi radial polynomials. Moreover, a search criterion is performed to establish the best values for the parameters α and β of the radial Jacobi polynomial families. Additionally, a polar pixel approach is taken into account to increase the numerical accuracy in the calculation of the QGJFMs. To prove the mathematical theory, some color images from optical microscopy and human retina are used. Experiments and results about color image reconstruction are presented. PMID:27014716

Mission specification for three generic mission classes

NASA Technical Reports Server (NTRS)

1979-01-01

Mission specifications for three generic mission classes are generated to provide a baseline for definition and analysis of data acquisition platform system concepts. The mission specifications define compatible groupings of sensors that satisfy specific earth resources and environmental mission objectives. The driving force behind the definition of sensor groupings is mission need; platform and space transportation system constraints are of secondary importance. The three generic mission classes are: (1) low earth orbit sun-synchronous; (2) geosynchronous; and (3) non-sun-synchronous, nongeosynchronous. These missions are chosen to provide a variety of sensor complements and implementation concepts. Each mission specification relates mission categories, mission objectives, measured parameters, and candidate sensors to orbits and coverage, operations compatibility, and platform fleet size.

Knowledge, attitudes, and practices of community pharmacists on generic medicines in Qatar.

PubMed

Awaisu, Ahmed; Kheir, Nadir; Ibrahim, Mohamed Izham Mohamed; El-Hajj, Maguy; Hazi, Huda; Khudair, Nada; Barazi, Raja

2014-04-01

The practice of generic medicines prescribing, dispensing and substitution in developing countries has been controversial among healthcare professionals, particularly due to issues on quality, safety and efficacy. These controversies are as a result of inter-country differences in policies and laws as well as individualized knowledge and attitudes of pharmacists pertaining to generic medicines. This study primarily aims to assess the knowledge, attitudes, and practices of community pharmacists in Qatar towards generic medicines. Community pharmacy settings throughout the State of Qatar. A cross-sectional study using a pretested paper-based survey was conducted among a random sample of community pharmacists in Qatar. The data were analyzed using IBM-SPSS(®) version 20. Both descriptive and inferential statistical analyses were applied. Knowledge, attitudes, and practices of generic medicines pertaining to regulatory standards, safety, efficacy, quality, and future policies. Results A total of 160 surveys were distributed to community pharmacists of which 118 were returned (response rate, 74 %). The mean total score of generic medicines knowledge among the pharmacists was 6.8 ± 1.6 (maximum possible score was 10). Years of practice as well as place of obtaining academic degree did not influence knowledge score. Approximately 72 % of the pharmacists supported generic substitution for brand name drugs in all cases where a generic medicine is available and the majority (93 %) agreed that pharmacists should be given generic substitution right. Nearly 61 % of the pharmacists considered lack of proven bioequivalence to original brands as an important barrier for selecting generic medicines and 55 % rated "lack of policy for directing the practice of generic medicine" as an important barrier. In order to enhance the quality use of and to promote the practice of generic medicines in Qatar, an educational program should be implemented. A national generic medicine policy and guidelines are warranted in the State of Qatar.

Comparing generic and innovator drugs: a review of 12 years of bioequivalence data from the United States Food and Drug Administration.

PubMed

Davit, Barbara M; Nwakama, Patrick E; Buehler, Gary J; Conner, Dale P; Haidar, Sam H; Patel, Devvrat T; Yang, Yongsheng; Yu, Lawrence X; Woodcock, Janet

2009-10-01

In the US, manufacturers seeking approval to market a generic drug product must submit data demonstrating that the generic formulation provides the same rate and extent of absorption as (ie, is bioequivalent to) the innovator drug product. Thus, most orally administered generic drug products in the US are approved based on results of one or more clinical bioequivalence studies. To evaluate how well the bioequivalence measures of generic drugs approved in the US over a 12-year period compare with those of their corresponding innovator counterparts. This retrospective analysis compared the generic and innovator bioequivalence measures from 2070 single-dose clinical bioequivalence studies of orally administered generic drug products approved by the Food and Drug Administration (FDA) from 1996 to 2007 (12 y). Bioequivalence measures evaluated were drug peak plasma concentration (C(max)) and area under the plasma drug concentration versus time curve (AUC), representing drug rate and extent of absorption, respectively. The generic/innovator C(max) and AUC geometric mean ratios (GMRs) were determined from each of the bioequivalence studies, which used from 12 to 170 subjects. The GMRs from the 2070 studies were averaged. In addition, the distribution of differences between generic means and innovator means was determined for both C(max) and AUC. The mean +/- SD of the GMRs from the 2070 studies was 1.00 +/- 0.06 for C(max) and 1.00 +/- 0.04 for AUC. The average difference in C(max) and AUC between generic and innovator products was 4.35% and 3.56%, respectively. In addition, in nearly 98% of the bioequivalence studies conducted during this period, the generic product AUC differed from that of the innovator product by less than 10%. The criteria used to evaluate generic drug bioequivalence studies support the FDA's objective of approving generic drug formulations that are therapeutically equivalent to their innovator counterparts.

Scramjet mixing establishment times for a pulse facility

NASA Technical Reports Server (NTRS)

Rogers, R. Clayton; Weidner, Elizabeth H.

1991-01-01

A numerical simulation of the temporally developing flow through a generic scramjet combustor duct is presented for stagnation conditions typical of flight at Mach 13 as produced by a shock tunnel pulse facility. The particular focus is to examine the start up transients and to determine the time required for certain flow parameters to become established. The calculations were made with a Navier-Stokes solver SPARK with temporally relaxing inflow conditions derived from operation of the T4 shock tunnel at the University of Queensland in Australia. Calculations at nominal steady inflow conditions were made for comparison. The generic combustor geometry includes the injection of hydrogen fuel from the base of a centrally located strut. In both cases, the flow was assumed laminar and fuel combustion was not included. The establishment process is presented for viscous parameters in the boundary layer and for parameters related to the fuel mixing.

Replica and extreme-value analysis of the Jarzynski free-energy estimator

NASA Astrophysics Data System (ADS)

Palassini, Matteo; Ritort, Felix

2008-03-01

We analyze the Jarzynski estimator of free-energy differences from nonequilibrium work measurements. By a simple mapping onto Derrida's Random Energy Model, we obtain a scaling limit for the expectation of the bias of the estimator. We then derive analytical approximations in three different regimes of the scaling parameter x = log(N)/W, where N is the number of measurements and W the mean dissipated work. Our approach is valid for a generic distribution of the dissipated work, and is based on a replica symmetry breaking scheme for x >> 1, the asymptotic theory of extreme value statistics for x << 1, and a direct approach for x near one. The combination of the three analytic approximations describes well Monte Carlo data for the expectation value of the estimator, for a wide range of values of N, from N=1 to large N, and for different work distributions. Based on these results, we introduce improved free-energy estimators and discuss the application to the analysis of experimental data.

Integrating GLL-Weibull Distribution Within a Bayesian Framework for Life Prediction of Shape Memory Alloy Spring Undergoing Thermo-mechanical Fatigue

NASA Astrophysics Data System (ADS)

Kundu, Pradeep; Nath, Tameshwer; Palani, I. A.; Lad, Bhupesh K.

2018-06-01

The present paper tackles an important but unmapped problem of the reliability estimations of smart materials. First, an experimental setup is developed for accelerated life testing of the shape memory alloy (SMA) springs. Generalized log-linear Weibull (GLL-Weibull) distribution-based novel approach is then developed for SMA spring life estimation. Applied stimulus (voltage), elongation and cycles of operation are used as inputs for the life prediction model. The values of the parameter coefficients of the model provide better interpretability compared to artificial intelligence based life prediction approaches. In addition, the model also considers the effect of operating conditions, making it generic for a range of the operating conditions. Moreover, a Bayesian framework is used to continuously update the prediction with the actual degradation value of the springs, thereby reducing the uncertainty in the data and improving the prediction accuracy. In addition, the deterioration of material with number of cycles is also investigated using thermogravimetric analysis and scanning electron microscopy.

Stickiness in Hamiltonian systems: From sharply divided to hierarchical phase space

NASA Astrophysics Data System (ADS)

Altmann, Eduardo G.; Motter, Adilson E.; Kantz, Holger

2006-02-01

We investigate the dynamics of chaotic trajectories in simple yet physically important Hamiltonian systems with nonhierarchical borders between regular and chaotic regions with positive measures. We show that the stickiness to the border of the regular regions in systems with such a sharply divided phase space occurs through one-parameter families of marginally unstable periodic orbits and is characterized by an exponent γ=2 for the asymptotic power-law decay of the distribution of recurrence times. Generic perturbations lead to systems with hierarchical phase space, where the stickiness is apparently enhanced due to the presence of infinitely many regular islands and Cantori. In this case, we show that the distribution of recurrence times can be composed of a sum of exponentials or a sum of power laws, depending on the relative contribution of the primary and secondary structures of the hierarchy. Numerical verification of our main results are provided for area-preserving maps, mushroom billiards, and the newly defined magnetic mushroom billiards.

Segregating animals in naturalistic surroundings: interaction of color distributions and mechanisms.

PubMed

Jansen, Michael; Giesel, Martin; Zaidi, Qasim

2016-03-01

Humans have been shown to rapidly detect animals in naturalistic scenes, but the role of color in this task is unclear. We first analyze the color information contained in a large number of images of salient and camouflaged animals in generic backgrounds. We found that color distributions of most animals and of their immediate backgrounds were oriented along other than the cardinal directions of color space. In addition, the maximum distances between animals and background distributions also tended to be along noncardinal directions, suggesting a role for higher-order cortical color mechanisms whose preferred axes are distributed widely in color space. We measured temporal thresholds for segmenting animal color distributions from background distributions in the absence of spatial cues. Combined over all observers and all images in our sample, thresholds for segmenting isoluminant projections of these distributions were lower than for segmenting the original distributions and considerably lower than for segmenting achromatic projections. Color information is thus likely to be useful in segregating animals in generic views, i.e., views not purposely chosen by the photographer to enhance the visibility of the animal. However, a comparison of thresholds with distances between distributions failed to reveal any advantage conferred by higher-order color mechanisms.

Is it ethical to prescribe generic immunosuppressive drugs to renal transplant patients?

PubMed

Allard, Julie; Fortin, Marie-Chantal

2014-01-01

This review was conducted to determine the ethical acceptability of prescribing generic immunosuppressive drugs to renal transplant patients. The literature search was conducted using Pubmed and Google Scholar. The use of generic immunosuppressive drugs (ISDs) in transplantation is a controversial topic. There is a consensus among transplant societies that clinical data is lacking and that caution should be exercised. The reluctance to use generic ISDs in organ transplantation is partly related to the fact that most are "critical dose drugs", and that either low dosing or overdosing could have serious adverse consequences for both patients and society (i.e., the loss of scarce organs). In this paper, we examine the various ethical issues involved such as distributive justice, physician duties, risks versus benefits, conflict of interest, informed consent, and logistical and economic issues. Our analysis was limited by the paucity of clinical data on generic ISDs and the absence of health economics studies to quantify the benefits of prescribing generic ISDs. Our study led us to conclude that it would be ethical to prescribe generic ISDs provided certain conditions were met. These include regulatory safeguards to minimize the risks of substitution; education of patients; and further clinical and health economics studies to better inform clinicians, patients and society of the risks and costs related to drug substitution.

Dosimetric characteristics of electron beams produced by a mobile accelerator for IORT.

PubMed

Pimpinella, M; Mihailescu, D; Guerra, A S; Laitano, R F

2007-10-21

Energy and angular distributions of electron beams with different energies were simulated by Monte Carlo calculations. These beams were generated by the NOVAC7 system (Hitesys, Italy), a mobile electron accelerator specifically dedicated to intra-operative radiation therapy (IORT). The electron beam simulations were verified by comparing the measured dose distributions with the corresponding calculated distributions. As expected, a considerable difference was observed in the energy and angular distributions between the IORT beams studied in the present work and the electron beams produced by conventional accelerators for non-IORT applications. It was also found that significant differences exist between the IORT beams used in this work and other IORT beams with different collimation systems. For example, the contribution from the scattered electrons to the total dose was found to be up to 15% higher in the NOVAC7 beams. The water-to-air stopping power ratios of the IORT beams used in this work were calculated on the basis of the beam energy distributions obtained by the Monte Carlo simulations. These calculated stopping power ratios, s(w,air), were compared with the corresponding s(w,air) values recommended by the TRS-381 and TRS-398 IAEA dosimetry protocols in order to estimate the deviations between a dosimetry based on generic parameters and a dosimetry based on parameters specifically obtained for the actual IORT beams. The deviations in the s(w,air) values were found to be as large as up to about 1%. Therefore, we recommend that a preliminary analysis should always be made when dealing with IORT beams in order to assess to what extent the possible differences in the s(w,air) values have to be accounted for or may be neglected on the basis of the specific accuracy needed in clinical dosimetry.

Combined structures-controls optimization of lattice trusses

NASA Technical Reports Server (NTRS)

Balakrishnan, A. V.

1991-01-01

The role that distributed parameter model can play in CSI is demonstrated, in particular in combined structures controls optimization problems of importance in preliminary design. Closed form solutions can be obtained for performance criteria such as rms attitude error, making possible analytical solutions of the optimization problem. This is in contrast to the need for numerical computer solution involving the inversion of large matrices in traditional finite element model (FEM) use. Another advantage of the analytic solution is that it can provide much needed insight into phenomena that can otherwise be obscured or difficult to discern from numerical computer results. As a compromise in level of complexity between a toy lab model and a real space structure, the lattice truss used in the EPS (Earth Pointing Satellite) was chosen. The optimization problem chosen is a generic one: of minimizing the structure mass subject to a specified stability margin and to a specified upper bond on the rms attitude error, using a co-located controller and sensors. Standard FEM treating each bar as a truss element is used, while the continuum model is anisotropic Timoshenko beam model. Performance criteria are derived for each model, except that for the distributed parameter model, explicit closed form solutions was obtained. Numerical results obtained by the two model show complete agreement.

The MODIS reprojection tool

USGS Publications Warehouse

Dwyer, John L.; Schmidt, Gail L.; Qu, J.J.; Gao, W.; Kafatos, M.; Murphy , R.E.; Salomonson, V.V.

2006-01-01

The MODIS Reprojection Tool (MRT) is designed to help individuals work with MODIS Level-2G, Level-3, and Level-4 land data products. These products are referenced to a global tiling scheme in which each tile is approximately 10° latitude by 10° longitude and non-overlapping (Fig. 9.1). If desired, the user may reproject only selected portions of the product (spatial or parameter subsetting). The software may also be used to convert MODIS products to file formats (generic binary and GeoTIFF) that are more readily compatible with existing software packages. The MODIS land products distributed by the Land Processes Distributed Active Archive Center (LP DAAC) are in the Hierarchical Data Format - Earth Observing System (HDF-EOS), developed by the National Center for Supercomputing Applications at the University of Illinois at Urbana Champaign for the NASA EOS Program. Each HDF-EOS file is comprised of one or more science data sets (SDSs) corresponding to geophysical or biophysical parameters. Metadata are embedded in the HDF file as well as contained in a .met file that is associated with each HDF-EOS file. The MRT supports 8-bit, 16-bit, and 32-bit integer data (both signed and unsigned), as well as 32-bit float data. The data type of the output is the same as the data type of each corresponding input SDS.

3D characterization of the fracture network in a deformed chalk reservoir analogue: The Lagerdorf case

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koestler, A.G.; Reksten, K.

1994-12-31

Quantitative descriptions of the 3D fracture networks in terms of connectivity, fracture types, fracture surface roughness and flow characteristics are necessary for reservoir evaluation, management, and enhanced oil recovery programs of fractured reservoirs. For a period of 2 years, a research project focused on an analogue to fractured chalk reservoirs excellently exposed near Laegerdorf, NW Germany. Upper Cretaceous chalk has been uplifted and deformed by an underlying salt diapir, and is now exploited for the cement industry. In the production wall of a quarry, the fracture network of the deformed chalk was characterized and mapped at different scales. The wallmore » was scraped off as chalk exploitation proceeded, continuously revealing new sections through the faulted and fractured chalk body. A 230 m long part of the 35m high production wall was investigated during its recess of 25m. The large amount of fracture data were analyzed with respect to parameters such as fracture density distribution, orientation- and length distribution, and in terms of the representativity of data sets collected from restricted rock volumes. This 3D description and analysis of a fracture network revealed quantitative generic parameters of importance for modeling chalk reservoirs with less data and lower data quality.« less

Generic instabilities in a fluid membrane coupled to a thin layer of ordered active polar fluid.

PubMed

Sarkar, Niladri; Basu, Abhik

2013-08-01

We develop an effective two-dimensional coarse-grained description for the coupled system of a planar fluid membrane anchored to a thin layer of polar ordered active fluid below. The macroscopic orientation of the active fluid layer is assumed to be perpendicular to the attached membrane. We demonstrate that activity or nonequilibrium drive of the active fluid makes such a system generically linearly unstable for either signature of a model parameter [Formula: see text] [Formula: see text] that characterises the strength of activity. Depending upon boundary conditions and within a range of the model parameters, underdamped propagating waves may be present in our model. We discuss the phenomenological significance of our results.

Lattice QCD exploration of parton pseudo-distribution functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orginos, Kostas; Radyushkin, Anatoly; Karpie, Joseph

Here, we demonstrate a new method of extracting parton distributions from lattice calculations. The starting idea is to treat the generic equal-time matrix elementmore » $${\\cal M} (Pz_3, z_3^2)$$ as a function of the Ioffe time $$\

Lattice QCD exploration of parton pseudo-distribution functions

DOE PAGES

Orginos, Kostas; Radyushkin, Anatoly; Karpie, Joseph; ...

2017-11-08

Here, we demonstrate a new method of extracting parton distributions from lattice calculations. The starting idea is to treat the generic equal-time matrix elementmore » $${\\cal M} (Pz_3, z_3^2)$$ as a function of the Ioffe time $$\

Pharmaceutical quality of seven generic Levodopa/Benserazide products compared with original Madopar® / Prolopa®.

PubMed

Gasser, Urs E; Fischer, Anton; Timmermans, Jan P; Arnet, Isabelle

2013-04-23

By definition, a generic product is considered interchangeable with the innovator brand product. Controversy exists about interchangeability, and attention is predominantly directed to contaminants. In particular for chronic, degenerative conditions such as in Parkinson's disease (PD) generic substitution remains debated among physicians, patients and pharmacists. The objective of this study was to compare the pharmaceutical quality of seven generic levodopa/benserazide hydrochloride combination products marketed in Germany with the original product (Madopar® / Prolopa® 125, Roche, Switzerland) in order to evaluate the potential impact of Madopar® generics versus branded products for PD patients and clinicians. Madopar® / Prolopa® 125 tablets and capsules were used as reference material. The generic products tested (all 100 mg/25 mg formulations) included four tablet and three capsule formulations. Colour, appearance of powder (capsules), disintegration and dissolution, mass of tablets and fill mass of capsules, content, identity and amounts of impurities were assessed along with standard physical and chemical laboratory tests developed and routinely practiced at Roche facilities. Results were compared to the original "shelf-life" specifications in use by Roche. Each of the seven generic products had one or two parameters outside the specifications. Deviations for the active ingredients ranged from +8.4% (benserazide) to -7.6% (levodopa) in two tablet formulations. Degradation products were measured in marked excess (+26.5%) in one capsule formulation. Disintegration time and dissolution for levodopa and benserazide hydrochloride at 30 min were within specifications for all seven generic samples analysed, however with some outliers. Deviations for the active ingredients may go unnoticed by a new user of the generic product, but may entail clinical consequences when switching from original to generic during a long-term therapy. Degradation products may pose a safety concern. Our results should prompt caution when prescribing a generic of Madopar®/Prolopa®, and also invite to further investigations in view of a more comprehensive approach, both pharmaceutical and clinical.

Two-component Jaffe models with a central black hole - I. The spherical case

NASA Astrophysics Data System (ADS)

Ciotti, Luca; Ziaee Lorzad, Azadeh

2018-02-01

Dynamical properties of spherically symmetric galaxy models where both the stellar and total mass density distributions are described by the Jaffe (1983) profile (with different scalelengths and masses) are presented. The orbital structure of the stellar component is described by Osipkov-Merritt anisotropy, and a black hole (BH) is added at the centre of the galaxy; the dark matter halo is isotropic. First, the conditions required to have a nowhere negative and monotonically decreasing dark matter halo density profile are derived. We then show that the phase-space distribution function can be recovered by using the Lambert-Euler W function, while in absence of the central BH only elementary functions appears in the integrand of the inversion formula. The minimum value of the anisotropy radius for consistency is derived in terms of the galaxy parameters. The Jeans equations for the stellar component are solved analytically, and the projected velocity dispersion at the centre and at large radii are also obtained analytically for generic values of the anisotropy radius. Finally, the relevant global quantities entering the Virial Theorem are computed analytically, and the fiducial anisotropy limit required to prevent the onset of Radial Orbit Instability is determined as a function of the galaxy parameters. The presented models, even though highly idealized, represent a substantial generalization of the models presented in Ciotti, and can be useful as starting point for more advanced modelling, the dynamics and the mass distribution of elliptical galaxies.

Thermalization near Integrability in a Dipolar Quantum Newton's Cradle

NASA Astrophysics Data System (ADS)

Tang, Yijun; Kao, Wil; Li, Kuan-Yu; Seo, Sangwon; Mallayya, Krishnanand; Rigol, Marcos; Gopalakrishnan, Sarang; Lev, Benjamin L.

2018-04-01

Isolated quantum many-body systems with integrable dynamics generically do not thermalize when taken far from equilibrium. As one perturbs such systems away from the integrable point, thermalization sets in, but the nature of the crossover from integrable to thermalizing behavior is an unresolved and actively discussed question. We explore this question by studying the dynamics of the momentum distribution function in a dipolar quantum Newton's cradle consisting of highly magnetic dysprosium atoms. This is accomplished by creating the first one-dimensional Bose gas with strong magnetic dipole-dipole interactions. These interactions provide tunability of both the strength of the integrability-breaking perturbation and the nature of the near-integrable dynamics. We provide the first experimental evidence that thermalization close to a strongly interacting integrable point occurs in two steps: prethermalization followed by near-exponential thermalization. Exact numerical calculations on a two-rung lattice model yield a similar two-timescale process, suggesting that this is generic in strongly interacting near-integrable models. Moreover, the measured thermalization rate is consistent with a parameter-free theoretical estimate, based on identifying the types of collisions that dominate thermalization. By providing tunability between regimes of integrable and nonintegrable dynamics, our work sheds light on the mechanisms by which isolated quantum many-body systems thermalize and on the temporal structure of the onset of thermalization.

Is generic rifaximin still a poorly absorbed antibiotic? A comparison of branded and generic formulations in healthy volunteers.

PubMed

Blandizzi, Corrado; Viscomi, Giuseppe Claudio; Marzo, Antonio; Scarpignato, Carmelo

2014-07-01

Rifaximin is an antibiotic, locally acting in the gastrointestinal tract, which may exist in different crystal as well as amorphous forms. The branded rifaximin formulation contains the polymorph rifaximin-α, whose systemic bioavailability is very limited. This study was performed to compare the pharmacokinetics of this formulation with that of a generic product, whose composition in terms of solid state forms of the active pharmaceutical ingredient was found to be different. Two tablets (2×200mg) of branded and generic formulations were given to 24 healthy volunteers of either sex, according to a single-blind, randomized, two-treatment, single-dose, two-period, cross-over design. Plasma and urinary samples were collected at preset times (for 24h or 48h, respectively) after dosing, and assayed for rifaximin concentrations by high-performance liquid chromatography-mass spectrometry. Rifaximin plasma and urine concentration-time profiles showed relevant differences when generic and branded rifaximin were compared. Most pharmacokinetic parameters were significantly higher after administration of generic rifaximin than after rifaximin-α. In particular, the differences for Cmax, AUC and cumulative urinary excretion between the generic formulation and the branded product ranged from 165% to 345%. The few adverse events recorded were not serious and not related to study medications. The results of the present investigation demonstrate different systemic bioavailability of generic and branded formulations of rifaximin. As a consequence, the therapeutic results obtained with rifaximin-α should not be translated sic et simpliciter to the generic formulations of rifaximin, which do not claim containing only rifaximin-α and will display significantly higher systemic absorption in both health and disease. Copyright © 2014 Elsevier Ltd. All rights reserved.

Inter-Individual Variability in High-Throughput Risk ...

EPA Pesticide Factsheets

We incorporate realistic human variability into an open-source high-throughput (HT) toxicokinetics (TK) modeling framework for use in a next-generation risk prioritization approach. Risk prioritization involves rapid triage of thousands of environmental chemicals, most which have little or no existing TK data. Chemicals are prioritized based on model estimates of hazard and exposure, to decide which chemicals should be first in line for further study. Hazard may be estimated with in vitro HT screening assays, e.g., U.S. EPA’s ToxCast program. Bioactive ToxCast concentrations can be extrapolated to doses that produce equivalent concentrations in body tissues using a reverse TK approach in which generic TK models are parameterized with 1) chemical-specific parameters derived from in vitro measurements and predicted from chemical structure; and 2) with physiological parameters for a virtual population. Here we draw physiological parameters from realistic estimates of distributions of demographic and anthropometric quantities in the modern U.S. population, based on the most recent CDC NHANES data. A Monte Carlo approach, accounting for the correlation structure in physiological parameters, is used to estimate ToxCast equivalent doses for the most sensitive portion of the population. To quantify risk, ToxCast equivalent doses are compared to estimates of exposure rates based on Bayesian inferences drawn from NHANES urinary analyte biomonitoring data. The inclusion

Forecasting the (un)productivity of the 2014 M 6.0 South Napa aftershock sequence

USGS Publications Warehouse

Llenos, Andrea L.; Michael, Andrew J.

2017-01-01

The 24 August 2014 Mw 6.0 South Napa mainshock produced fewer aftershocks than expected for a California earthquake of its magnitude. In the first 4.5 days, only 59 M≥1.8 aftershocks occurred, the largest of which was an M 3.9 that happened a little over two days after the mainshock. We investigate the aftershock productivity of the South Napa sequence and compare it with other M≥5.5 California strike‐slip mainshock–aftershock sequences. While the productivity of the South Napa sequence is among the lowest, northern California mainshocks generally have fewer aftershocks than mainshocks further south, although the productivities vary widely in both regions. An epidemic‐type aftershock sequence (ETAS) model (Ogata, 1988) fit to Napa seismicity from 1980 to 23 August 2014 fits the sequence well and suggests that low‐productivity sequences are typical of this area. Utilizing regional variations in productivity could improve operational earthquake forecasting (OEF) by improving the model used immediately after the mainshock. We show this by comparing the daily rate of M≥2 aftershocks to forecasts made with the generic California model (Reasenberg and Jones, 1989; hereafter, RJ89), RJ89 models with productivity updated daily, a generic California ETAS model, an ETAS model based on premainshock seismicity, and ETAS models updated daily following the mainshock. RJ89 models for which only the productivity is updated provide better forecasts than the generic RJ89 California model, and the Napa‐specific ETAS models forecast the aftershock rates more accurately than either generic model. Therefore, forecasts that use localized initial parameters and that rapidly update the productivity may be better for OEF than using a generic model and/or updating all parameters.

European Multidisciplinary seafloor and the Observatory of the water column for Development; The setup of an interoperable Generic Sensor Module

NASA Astrophysics Data System (ADS)

Danobeitia, J.; Oscar, G.; Bartolomé, R.; Sorribas, J.; Del Rio, J.; Cadena, J.; Toma, D. M.; Bghiel, I.; Martinez, E.; Bardaji, R.; Piera, J.; Favali, P.; Beranzoli, L.; Rolin, J. F.; Moreau, B.; Andriani, P.; Lykousis, V.; Hernandez Brito, J.; Ruhl, H.; Gillooly, M.; Terrinha, P.; Radulescu, V.; O'Neill, N.; Best, M.; Marinaro, G.

2016-12-01

European Multidisciplinary seafloor and the Observatory of the water column for Development (EMSODEV) is a Horizon-2020 UE project whose overall objective is the operationalization of eleven marine observatories and four test sites distributed throughout Europe, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. The whole infrastructure is managed by the European consortium EMSO-ERIC (European Research Infrastructure Consortium) with the participation of 8 European countries and other partner countries. Now, we are implementing a Generic Sensor Module (EGIM) within the EMSO ERIC distributed marine research infrastructure. Our involvement is mainly on developing standard-compliant generic software for Sensor Web Enablement (SWE) on EGIM device. The main goal of this development is to support the sensors data acquisition on a new interoperable EGIM system. The EGIM software structure is made up of one acquisition layer located between the recorded data at EGIM module and the data management services. Therefore, two main interfaces are implemented: first, assuring the EGIM hardware acquisition and second allowing push and pull data from data management layer (Sensor Web Enable standard compliant). All software components used are Open source licensed and has been configured to manage different roles on the whole system (52º North SOS Server, Zabbix Monitoring System). The acquisition data module has been implemented with the aim to join all components for EGIM data acquisition and server fulfilling SOS standards interface. The system is already achieved awaiting for the first laboratory bench test and shallow water test connection to the OBSEA node, offshore Vilanova I la Geltrú (Barcelona, Spain). The EGIM module will record a wide range of ocean parameters in a long-term consistent, accurate and comparable manner from disciplines such as biology, geology, chemistry, physics, engineering, and computer science, from polar to subtropical environments, through the water column down to the deep sea. The measurements recorded along EMSO NODES are critical to respond accurately to the social and scientific challenges such as climate change, changes in marine ecosystems, and marine hazards.

Spatio-Temporal Analysis of Urban Acoustic Environments with Binaural Psycho-Acoustical Considerations for IoT-Based Applications

PubMed Central

Montoya-Belmonte, Jose; Cobos, Maximo; Torres-Aranda, Ana M.

2018-01-01

Sound pleasantness or annoyance perceived in urban soundscapes is a major concern in environmental acoustics. Binaural psychoacoustic parameters are helpful to describe generic acoustic environments, as it is stated within the ISO 12913 framework. In this paper, the application of a Wireless Acoustic Sensor Network (WASN) to evaluate the spatial distribution and the evolution of urban acoustic environments is described. Two experiments are presented using an indoor and an outdoor deployment of a WASN with several nodes using an Internet of Things (IoT) environment to collect audio data and calculate meaningful parameters such as the sound pressure level, binaural loudness and binaural sharpness. A chunk of audio is recorded in each node periodically with a microphone array and the binaural rendering is conducted by exploiting the estimated directional characteristics of the incoming sound by means of DOA estimation. Each node computes the parameters in a different location and sends the values to a cloud-based broker structure that allows spatial statistical analysis through Kriging techniques. A cross-validation analysis is also performed to confirm the usefulness of the proposed system. PMID:29495407

Approximate Pressure Distribution in an Accelerating Launch-Vehicle Fuel Tank

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

2010-01-01

A detailed derivation of the equations governing the pressure in a generic liquid-fuel launch vehicle tank subjected to uniformly accelerated motion is presented. The equations obtained are then for the Space Shuttle Superlightweight Liquid-Oxygen Tank at approximately 70 seconds into flight. This generic derivation is applicable to any fuel tank in the form of a surface of revolution and should be useful in the design of future launch vehicles

A generic implementation of replica exchange with solute tempering (REST2) algorithm in NAMD for complex biophysical simulations

NASA Astrophysics Data System (ADS)

Jo, Sunhwan; Jiang, Wei

2015-12-01

Replica Exchange with Solute Tempering (REST2) is a powerful sampling enhancement algorithm of molecular dynamics (MD) in that it needs significantly smaller number of replicas but achieves higher sampling efficiency relative to standard temperature exchange algorithm. In this paper, we extend the applicability of REST2 for quantitative biophysical simulations through a robust and generic implementation in greatly scalable MD software NAMD. The rescaling procedure of force field parameters controlling REST2 "hot region" is implemented into NAMD at the source code level. A user can conveniently select hot region through VMD and write the selection information into a PDB file. The rescaling keyword/parameter is written in NAMD Tcl script interface that enables an on-the-fly simulation parameter change. Our implementation of REST2 is within communication-enabled Tcl script built on top of Charm++, thus communication overhead of an exchange attempt is vanishingly small. Such a generic implementation facilitates seamless cooperation between REST2 and other modules of NAMD to provide enhanced sampling for complex biomolecular simulations. Three challenging applications including native REST2 simulation for peptide folding-unfolding transition, free energy perturbation/REST2 for absolute binding affinity of protein-ligand complex and umbrella sampling/REST2 Hamiltonian exchange for free energy landscape calculation were carried out on IBM Blue Gene/Q supercomputer to demonstrate efficacy of REST2 based on the present implementation.

Identifying the optimal spatially and temporally invariant root distribution for a semiarid environment

NASA Astrophysics Data System (ADS)

Sivandran, Gajan; Bras, Rafael L.

2012-12-01

In semiarid regions, the rooting strategies employed by vegetation can be critical to its survival. Arid regions are characterized by high variability in the arrival of rainfall, and species found in these areas have adapted mechanisms to ensure the capture of this scarce resource. Vegetation roots have strong control over this partitioning, and assuming a static root profile, predetermine the manner in which this partitioning is undertaken.A coupled, dynamic vegetation and hydrologic model, tRIBS + VEGGIE, was used to explore the role of vertical root distribution on hydrologic fluxes. Point-scale simulations were carried out using two spatially and temporally invariant rooting schemes: uniform: a one-parameter model and logistic: a two-parameter model. The simulations were forced with a stochastic climate generator calibrated to weather stations and rain gauges in the semiarid Walnut Gulch Experimental Watershed (WGEW) in Arizona. A series of simulations were undertaken exploring the parameter space of both rooting schemes and the optimal root distribution for the simulation, which was defined as the root distribution with the maximum mean transpiration over a 100-yr period, and this was identified. This optimal root profile was determined for five generic soil textures and two plant-functional types (PFTs) to illustrate the role of soil texture on the partitioning of moisture at the land surface. The simulation results illustrate the strong control soil texture has on the partitioning of rainfall and consequently the depth of the optimal rooting profile. High-conductivity soils resulted in the deepest optimal rooting profile with land surface moisture fluxes dominated by transpiration. As we move toward the lower conductivity end of the soil spectrum, a shallowing of the optimal rooting profile is observed and evaporation gradually becomes the dominate flux from the land surface. This study offers a methodology through which local plant, soil, and climate can be accounted for in the parameterization of rooting profiles in semiarid regions.

A comparison of generic drug prices in seven European countries: a methodological analysis.

PubMed

Wouters, Olivier J; Kanavos, Panos G

2017-03-31

Policymakers and researchers frequently compare the prices of medicines between countries. Such comparisons often serve as barometers of how pricing and reimbursement policies are performing. The aim of this study was to examine methodological challenges to comparing generic drug prices. We calculated all commonly used price indices based on 2013 IMS Health data on sales of 3156 generic drugs in seven European countries. There were large differences in generic drug prices between countries. However, the results varied depending on the choice of index, base country, unit of volume, method of currency conversion, and therapeutic category. The results also differed depending on whether one looked at the prices charged by manufacturers or those charged by pharmacists. Price indices are a useful statistical approach for comparing drug prices across countries, but researchers and policymakers should interpret price indices with caution given their limitations. Price-index results are highly sensitive to the choice of method and sample. More research is needed to determine the drivers of price differences between countries. The data suggest that some governments should aim to reduce distribution costs for generic drugs.

Reliability and validity of functional health status and health-related quality of life questionnaires in children with recurrent acute otitis media

PubMed Central

Brouwer, Carole N. M.; Schilder, Anne G. M.; van Stel, Henk F.; Rovers, Maroeska M.; Veenhoven, Reinier H.; Grobbee, Diederick E.; Sanders, Elisabeth A. M.

2007-01-01

In this study the reliability and validity of generic and disease-specific questionnaires has been assessed focusing on responsiveness. This is part of a study on the effects of recurrent acute otitis media (rAOM) on functional health status (FHS) and health-related quality of life (HRQoL) in 383 children with rAOM participating in a randomized clinical trial. The following generic questionnaires were studied: 1. RAND general health rating index, 2. Functional Status Questionnaire (FSQ Generic and FSQ Specific), 3. TNO-AZL Infant Quality of Life (TAIQOL), and the following disease-specific questionnaires: 1. Otitis Media-6 (OM-6), 2. Numerical rating scales (NRS) for child and caregiver (NRS Child and NRS Caregiver), and 3. a new Family Functioning Questionnaire (FFQ). Reliability was good to excellent (Cronbach’s α range 0.80–0.90, intraclass correlation coefficient range 0.76–0.93). Moderate to strong correlations were found between the questionnaires as well as between questionnaires and relevant clinical indicators (r = 0.29–0.49), demonstrating construct validity. Discriminant validity for children with few versus frequent episodes of acute otitis media per year was good for most questionnaires (P < 0.004) but poor for the otitis media-related subscales of the TAIQOL (P = 0.10–0.97) and both NRS (P = 0.22 and 0.48). Except for the TAIQOL subscales, change scores were significant (P < 0.003) for generic and disease-specific questionnaires. Effect sizes were somewhat higher for disease-specific compared to generic questionnaires (0.55–0.95 versus 0.32–0.60) except for the TAIQOL subscales, which showed very poor sensitivity to change. Anchor-based methods resulted in a somewhat larger range of estimates of MCID than distribution-based methods. Combining distribution-based and anchor-based methods resulted in similar ranges for the minimally clinical important differences for generic and disease-specific questionnaires: 2–15 points on a 0–100 scale. Apart from the generic TAIQOL subscales, both generic and disease-specific questionnaires used in this study showed good psychometric qualities and responsiveness for use in clinical studies on children with rAOM. PMID:17668290

The behaviour of resonances in Hecke triangular billiards under deformation

NASA Astrophysics Data System (ADS)

Howard, P. J.; O'Mahony, P. F.

2007-08-01

The right-hand boundary of Artin's billiard on the Poincaré half-plane is continuously deformed to generate a class of chaotic billiards which includes fundamental domains of the Hecke groups Γ(2, n) at certain values of the deformation parameter. The quantum scattering problem in these open chaotic billiards is described and the distributions of both real and imaginary parts of the resonant eigenvalues are investigated. The transitions to arithmetic chaos in the cases n ∈ {4, 6} are closely examined and the explicit analytic form for the scattering matrix is given together with the Fourier coefficients for the scattered wavefunction. The n = 4 and 6 cases have an additional set of regular equally spaced resonances compared to Artin's billiard (n = 3). For a general deformation, a numerical procedure is presented which generates the resonance eigenvalues and the evolution of the eigenvalues is followed as the boundary is varied continuously which leads to dramatic changes in their distribution. For deformations away from the non-generic arithmetic cases, including that of the tiling Hecke triangular billiard n = 5, the distributions of the positions and widths of the resonances are consistent with the predictions of a random matrix theory.

Novel methodology for pharmaceutical expenditure forecast.

PubMed

Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

The value appreciation of new drugs across countries today features a disruption that is making the historical data that are used for forecasting pharmaceutical expenditure poorly reliable. Forecasting methods rarely addressed uncertainty. The objective of this project was to propose a methodology to perform pharmaceutical expenditure forecasting that integrates expected policy changes and uncertainty (developed for the European Commission as the 'EU Pharmaceutical expenditure forecast'; see http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). 1) Identification of all pharmaceuticals going off-patent and new branded medicinal products over a 5-year forecasting period in seven European Union (EU) Member States. 2) Development of a model to estimate direct and indirect impacts (based on health policies and clinical experts) on savings of generics and biosimilars. Inputs were originator sales value, patent expiry date, time to launch after marketing authorization, price discount, penetration rate, time to peak sales, and impact on brand price. 3) Development of a model for new drugs, which estimated sales progression in a competitive environment. Clinical expected benefits as well as commercial potential were assessed for each product by clinical experts. Inputs were development phase, marketing authorization dates, orphan condition, market size, and competitors. 4) Separate analysis of the budget impact of products going off-patent and new drugs according to several perspectives, distribution chains, and outcomes. 5) Addressing uncertainty surrounding estimations via deterministic and probabilistic sensitivity analysis. This methodology has proven to be effective by 1) identifying the main parameters impacting the variations in pharmaceutical expenditure forecasting across countries: generics discounts and penetration, brand price after patent loss, reimbursement rate, the penetration of biosimilars and discount price, distribution chains, and the time to reach peak sales for new drugs; 2) estimating the statistical distribution of the budget impact; and 3) testing different pricing and reimbursement policy decisions on health expenditures. This methodology was independent of historical data and appeared to be highly flexible and adapted to test robustness and provide probabilistic analysis to support policy decision making.

Load-Flow in Multiphase Distribution Networks: Existence, Uniqueness, Non-Singularity, and Linear Models

DOE PAGES

Bernstein, Andrey; Wang, Cong; Dall'Anese, Emiliano; ...

2018-01-01

This paper considers unbalanced multiphase distribution systems with generic topology and different load models, and extends the Z-bus iterative load-flow algorithm based on a fixed-point interpretation of the AC load-flow equations. Explicit conditions for existence and uniqueness of load-flow solutions are presented. These conditions also guarantee convergence of the load-flow algorithm to the unique solution. The proposed methodology is applicable to generic systems featuring (i) wye connections; (ii) ungrounded delta connections; (iii) a combination of wye-connected and delta-connected sources/loads; and, (iv) a combination of line-to-line and line-to-grounded-neutral devices at the secondary of distribution transformers. Further, a sufficient condition for themore » non-singularity of the load-flow Jacobian is proposed. Finally, linear load-flow models are derived, and their approximation accuracy is analyzed. Theoretical results are corroborated through experiments on IEEE test feeders.« less

Power-Laws and Scaling in Finance: Empirical Evidence and Simple Models

NASA Astrophysics Data System (ADS)

Bouchaud, Jean-Philippe

We discuss several models that may explain the origin of power-law distributions and power-law correlations in financial time series. From an empirical point of view, the exponents describing the tails of the price increments distribution and the decay of the volatility correlations are rather robust and suggest universality. However, many of the models that appear naturally (for example, to account for the distribution of wealth) contain some multiplicative noise, which generically leads to non universal exponents. Recent progress in the empirical study of the volatility suggests that the volatility results from some sort of multiplicative cascade. A convincing `microscopic' (i.e. trader based) model that explains this observation is however not yet available. We discuss a rather generic mechanism for long-ranged volatility correlations based on the idea that agents constantly switch between active and inactive strategies depending on their relative performance.

Load-Flow in Multiphase Distribution Networks: Existence, Uniqueness, Non-Singularity, and Linear Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernstein, Andrey; Wang, Cong; Dall'Anese, Emiliano

This paper considers unbalanced multiphase distribution systems with generic topology and different load models, and extends the Z-bus iterative load-flow algorithm based on a fixed-point interpretation of the AC load-flow equations. Explicit conditions for existence and uniqueness of load-flow solutions are presented. These conditions also guarantee convergence of the load-flow algorithm to the unique solution. The proposed methodology is applicable to generic systems featuring (i) wye connections; (ii) ungrounded delta connections; (iii) a combination of wye-connected and delta-connected sources/loads; and, (iv) a combination of line-to-line and line-to-grounded-neutral devices at the secondary of distribution transformers. Further, a sufficient condition for themore » non-singularity of the load-flow Jacobian is proposed. Finally, linear load-flow models are derived, and their approximation accuracy is analyzed. Theoretical results are corroborated through experiments on IEEE test feeders.« less

Generic superweak chaos induced by Hall effect

NASA Astrophysics Data System (ADS)

Ben-Harush, Moti; Dana, Itzhack

2016-05-01

We introduce and study the "kicked Hall system" (KHS), i.e., charged particles periodically kicked in the presence of uniform magnetic (B ) and electric (E ) fields that are perpendicular to each other and to the kicking direction. We show that for resonant values of B and E and in the weak-chaos regime of sufficiently small nonintegrability parameter κ (the kicking strength), there exists a generic family of periodic kicking potentials for which the Hall effect from B and E significantly suppresses the weak chaos, replacing it by "superweak" chaos (SWC). This means that the system behaves as if the kicking strength were κ2 rather than κ . For E =0 , SWC is known to be a classical fingerprint of quantum antiresonance, but it occurs under much less generic conditions, in particular only for very special kicking potentials. Manifestations of SWC are a decrease in the instability of periodic orbits and a narrowing of the chaotic layers, relative to the ordinary weak-chaos case. Also, for global SWC, taking place on an infinite "stochastic web" in phase space, the chaotic diffusion on the web is much slower than the weak-chaos one. Thus, the Hall effect can be relatively stabilizing for small κ . In some special cases, the effect is shown to cause ballistic motion for almost all parameter values. The generic global SWC on stochastic webs in the KHS appears to be the two-dimensional closest analog to the Arnol'd web in higher dimensional systems.

The Spatial Vision Tree: A Generic Pattern Recognition Engine- Scientific Foundations, Design Principles, and Preliminary Tree Design

NASA Technical Reports Server (NTRS)

Rahman, Zia-ur; Jobson, Daniel J.; Woodell, Glenn A.

2010-01-01

New foundational ideas are used to define a novel approach to generic visual pattern recognition. These ideas proceed from the starting point of the intrinsic equivalence of noise reduction and pattern recognition when noise reduction is taken to its theoretical limit of explicit matched filtering. This led us to think of the logical extension of sparse coding using basis function transforms for both de-noising and pattern recognition to the full pattern specificity of a lexicon of matched filter pattern templates. A key hypothesis is that such a lexicon can be constructed and is, in fact, a generic visual alphabet of spatial vision. Hence it provides a tractable solution for the design of a generic pattern recognition engine. Here we present the key scientific ideas, the basic design principles which emerge from these ideas, and a preliminary design of the Spatial Vision Tree (SVT). The latter is based upon a cryptographic approach whereby we measure a large aggregate estimate of the frequency of occurrence (FOO) for each pattern. These distributions are employed together with Hamming distance criteria to design a two-tier tree. Then using information theory, these same FOO distributions are used to define a precise method for pattern representation. Finally the experimental performance of the preliminary SVT on computer generated test images and complex natural images is assessed.

Critical attributes of transdermal drug delivery system (TDDS)--a generic product development review.

PubMed

Ruby, P K; Pathak, Shriram M; Aggarwal, Deepika

2014-11-01

Bioequivalence testing of transdermal drug delivery systems (TDDS) has always been a subject of high concern for generic companies due to the formulation complexity and the fact that they are subtle to even minor manufacturing differences and hence should be clearly qualified in terms of quality, safety and efficacy. In recent times bioequivalence testing of transdermal patches has gained a global attention and many regulatory authorities worldwide have issued recommendations to set specific framework for demonstrating equivalence between two products. These current regulatory procedures demand a complete characterization of the generic formulation in terms of its physicochemical sameness, pharmacokinetics disposition, residual content and/or skin irritation/sensitization testing with respect to the reference formulation. This paper intends to highlight critical in vitro tests in assessing the therapeutic equivalence of products and also outlines their valuable applications in generic product success. Understanding these critical in vitro parameters can probably help to decode the complex bioequivalence outcomes, directing the generic companies to optimize the formulation design in reduced time intervals. It is difficult to summarize a common platform which covers all possible transdermal products; hence few case studies based on this approach has been presented in this review.

A portable MPI-based parallel vector template library

NASA Technical Reports Server (NTRS)

Sheffler, Thomas J.

1995-01-01

This paper discusses the design and implementation of a polymorphic collection library for distributed address-space parallel computers. The library provides a data-parallel programming model for C++ by providing three main components: a single generic collection class, generic algorithms over collections, and generic algebraic combining functions. Collection elements are the fourth component of a program written using the library and may be either of the built-in types of C or of user-defined types. Many ideas are borrowed from the Standard Template Library (STL) of C++, although a restricted programming model is proposed because of the distributed address-space memory model assumed. Whereas the STL provides standard collections and implementations of algorithms for uniprocessors, this paper advocates standardizing interfaces that may be customized for different parallel computers. Just as the STL attempts to increase programmer productivity through code reuse, a similar standard for parallel computers could provide programmers with a standard set of algorithms portable across many different architectures. The efficacy of this approach is verified by examining performance data collected from an initial implementation of the library running on an IBM SP-2 and an Intel Paragon.

A Portable MPI-Based Parallel Vector Template Library

NASA Technical Reports Server (NTRS)

Sheffler, Thomas J.

1995-01-01

This paper discusses the design and implementation of a polymorphic collection library for distributed address-space parallel computers. The library provides a data-parallel programming model for C + + by providing three main components: a single generic collection class, generic algorithms over collections, and generic algebraic combining functions. Collection elements are the fourth component of a program written using the library and may be either of the built-in types of c or of user-defined types. Many ideas are borrowed from the Standard Template Library (STL) of C++, although a restricted programming model is proposed because of the distributed address-space memory model assumed. Whereas the STL provides standard collections and implementations of algorithms for uniprocessors, this paper advocates standardizing interfaces that may be customized for different parallel computers. Just as the STL attempts to increase programmer productivity through code reuse, a similar standard for parallel computers could provide programmers with a standard set of algorithms portable across many different architectures. The efficacy of this approach is verified by examining performance data collected from an initial implementation of the library running on an IBM SP-2 and an Intel Paragon.

17 CFR 242.101 - Activities by distribution participants.

Code of Federal Regulations, 2014 CFR

2014-04-01

... section: (1) Research. The publication or dissemination of any information, opinion, or recommendation, if... the distribution participant; or (2) Investment grade nonconvertible and asset-backed securities....15c3-1 of this chapter, in one of its generic rating categories that signifies investment grade; or (3...

Active and passive surveillance of enoxaparin generics: a case study relevant to biosimilars.

PubMed

Grampp, Gustavo; Bonafede, Machaon; Felix, Thomas; Li, Edward; Malecki, Michael; Sprafka, J Michael

2015-03-01

This retrospective analysis assessed the capability of active and passive safety surveillance systems to track product-specific safety events in the USA for branded and generic enoxaparin, a complex injectable subject to immune-related and other adverse events (AEs). Analysis of heparin-induced thrombocytopenia (HIT) incidence was performed on benefit claims for commercial and Medicare supplemental-insured individuals newly treated with enoxaparin under pharmacy benefit (1 January 2009 - 30 June 2012). Additionally, spontaneous reports from the FDA AE Reporting System were reviewed to identify incidence and attribution of enoxaparin-related reports to specific manufacturers. Specific, dispensed products were identifiable from National Drug Codes only in pharmacy-benefit databases, permitting sensitive comparison of HIT incidence in nearly a third of patients treated with brand or generic enoxaparin. After originator medicine's loss of exclusivity, only 5% of spontaneous reports were processed by generic manufacturers; reports attributable to specific generics were approximately ninefold lower than expected based on market share. Claims data were useful for active surveillance of enoxaparin generics dispensed under pharmacy benefits but not for products administered under medical benefits. These findings suggest that the current spontaneous reporting system will not distinguish product-specific safety signals for products distributed by multiple manufacturers, including biosimilars.

Cohesive stress heterogeneities and the transition from intrinsic ductility to brittleness

NASA Astrophysics Data System (ADS)

Tanguy, D.

2017-11-01

The influence of nanoscale cavities on the fracture of the Σ 33 {554 }[110 ] symmetrical tilt grain boundary is studied by atomistic simulations. The crack crystallography is chosen such that dislocation emission is easy. A transition from a ductile behavior of the tip to a brittle one is obtained for a dense (coverage beyond 15% and intercavity spacing smaller than 4 nm) distribution of small cavities (sizes in-between 1 and 2 nm). The results are in good agreement with recent experiments from the literature. Even at the highest coverage, the character of the crack is highly sensitive to the initial position of the tip and a mixture of ductile and brittle responses is found. This complexity is beyond the usual criterion based on the drop of the work of separation with the amount of damage in the structure. It is shown that a heterogeneous cohesive zone model, with parameters extracted from the simulations and enriched with a criterion for plasticity, can explain the simulations and reproduce the transition. Additional simulations show that outside this range of small sizes and dense packing, which gives essentially a two-dimensional response (either crack opening or infinite straight dislocation emission), dislocation half-loops appear for intercavity spacing starting at about 4 nm. They constitute, together with regions of low coverage/small cavities, efficient obstacles to brittle cracking. These results could be guidelines to designing interfaces more resistant to solute embrittlement, in general. The cohesive zone model is generic. Furthermore, the {554} single crystal was used to determine to which extent the results depend on the details of the core structure versus the cavity distribution. These elements show that the conclusions reached have a generic character.

Sodium ferric gluconate (SFG) in complex with sucrose for IV infusion: bioequivalence of a new generic product with the branded product in healthy volunteers.

PubMed

Baribeault, David

2011-08-01

Parenteral sodium ferric gluconate in complex (Ferrlecit [branded SFG]) is used to treat patients with iron deficiency anemia undergoing chronic hemodialysis and receiving supplemental epoetin. This comparative pharmacokinetic study (GeneraMedix, Inc., Study 17909) evaluates whether the recently approved generic product Nulecit (generic SFG) and the branded product Ferrlecit (branded SFG) are bioequivalent. In this open-label study, 240 healthy volunteers in a fasting state were assigned randomly to a single 10-min intravenous (IV) infusion of 125 mg of generic or branded SFG. Total and transferrin-bound iron concentrations were determined for the 36-h period after infusion and corrected for pretreatment levels. Maximum concentration (Cmax) and area under the concentration-time curve of 0 to 36 h (AUC[0-36]) were compared between the two products. Demonstration of bioequivalence required that the 90% confidence intervals of each parameter evaluated for generic SFG were within 80% to 125% of the corresponding values for branded SFG. Uncorrected and baseline-corrected mean serum concentrations of total serum iron during the 36-h assessment period were similar for generic and branded SFG. For total serum iron, the geometric mean ratios of corrected Cmax and AUC[0-36] were 100%. For transferrin-bound iron, the geometric mean ratios were 87% for corrected Cmax and 92% for corrected AUC[0-36]. All associated 90% confidence intervals were within the range of 80% to 125%. A new generic SFG in complex for IV infusion is bioequivalent to the branded SFG in complex for IV infusion. The generic SFG is AB rated by the FDA and considered therapeutically equivalent to the branded product.

Pharmaceutical quality of seven generic Levodopa/Benserazide products compared with original Madopar® / Prolopa®

PubMed Central

2013-01-01

Background By definition, a generic product is considered interchangeable with the innovator brand product. Controversy exists about interchangeability, and attention is predominantly directed to contaminants. In particular for chronic, degenerative conditions such as in Parkinson’s disease (PD) generic substitution remains debated among physicians, patients and pharmacists. The objective of this study was to compare the pharmaceutical quality of seven generic levodopa/benserazide hydrochloride combination products marketed in Germany with the original product (Madopar® / Prolopa® 125, Roche, Switzerland) in order to evaluate the potential impact of Madopar® generics versus branded products for PD patients and clinicians. Methods Madopar® / Prolopa® 125 tablets and capsules were used as reference material. The generic products tested (all 100 mg/25 mg formulations) included four tablet and three capsule formulations. Colour, appearance of powder (capsules), disintegration and dissolution, mass of tablets and fill mass of capsules, content, identity and amounts of impurities were assessed along with standard physical and chemical laboratory tests developed and routinely practiced at Roche facilities. Results were compared to the original “shelf-life” specifications in use by Roche. Results Each of the seven generic products had one or two parameters outside the specifications. Deviations for the active ingredients ranged from +8.4% (benserazide) to −7.6% (levodopa) in two tablet formulations. Degradation products were measured in marked excess (+26.5%) in one capsule formulation. Disintegration time and dissolution for levodopa and benserazide hydrochloride at 30 min were within specifications for all seven generic samples analysed, however with some outliers. Conclusions Deviations for the active ingredients may go unnoticed by a new user of the generic product, but may entail clinical consequences when switching from original to generic during a long-term therapy. Degradation products may pose a safety concern. Our results should prompt caution when prescribing a generic of Madopar®/Prolopa®, and also invite to further investigations in view of a more comprehensive approach, both pharmaceutical and clinical. PMID:23617953

A distributed telerobotics construction set

NASA Technical Reports Server (NTRS)

Wise, James D.

1994-01-01

During the course of our research on distributed telerobotic systems, we have assembled a collection of generic, reusable software modules and an infrastructure for connecting them to form a variety of telerobotic configurations. This paper describes the structure of this 'Telerobotics Construction Set' and lists some of the components which comprise it.

Lightweight Filter Architecture for Energy Efficient Mobile Vehicle Localization Based on a Distributed Acoustic Sensor Network

PubMed Central

Kim, Keonwook

2013-01-01

The generic properties of an acoustic signal provide numerous benefits for localization by applying energy-based methods over a deployed wireless sensor network (WSN). However, the signal generated by a stationary target utilizes a significant amount of bandwidth and power in the system without providing further position information. For vehicle localization, this paper proposes a novel proximity velocity vector estimator (PVVE) node architecture in order to capture the energy from a moving vehicle and reject the signal from motionless automobiles around the WSN node. A cascade structure between analog envelope detector and digital exponential smoothing filter presents the velocity vector-sensitive output with low analog circuit and digital computation complexity. The optimal parameters in the exponential smoothing filter are obtained by analytical and mathematical methods for maximum variation over the vehicle speed. For stationary targets, the derived simulation based on the acoustic field parameters demonstrates that the system significantly reduces the communication requirements with low complexity and can be expected to extend the operation time considerably. PMID:23979482

Terrestrial photovoltaic cell process testing

NASA Technical Reports Server (NTRS)

Burger, D. R.

1985-01-01

The paper examines critical test parameters, criteria for selecting appropriate tests, and the use of statistical controls and test patterns to enhance PV-cell process test results. The coverage of critical test parameters is evaluated by examining available test methods and then screening these methods by considering the ability to measure those critical parameters which are most affected by the generic process, the cost of the test equipment and test performance, and the feasibility for process testing.

Terrestrial photovoltaic cell process testing

NASA Astrophysics Data System (ADS)

Burger, D. R.

The paper examines critical test parameters, criteria for selecting appropriate tests, and the use of statistical controls and test patterns to enhance PV-cell process test results. The coverage of critical test parameters is evaluated by examining available test methods and then screening these methods by considering the ability to measure those critical parameters which are most affected by the generic process, the cost of the test equipment and test performance, and the feasibility for process testing.

Energy use in the marine transportation industry. Task II. Efficiency improvements. Draft report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-06-02

Research and development areas that hold promise for maritime energy conservation are identified and evaluated. The methodology used in the evaluation of potential research areas and results, conclusions, and recommendations are presented. Fifteen programs are identified in four generic technologies and these are discussed in detail in appendices A-D. The areas are: main propulsion plants, propulsors, hydrodynamics, and vessel operations. Fuels are discussed briefly in appendix E. Additional information is presented on the generic US flag baseline operational and cost parameters; a sample output model is presented. (MCW)

Pressurization and expulsion of cryogenic liquids: Generic requirements for a low gravity experiment

NASA Technical Reports Server (NTRS)

Vandresar, Neil T.; Stochl, Robert J.

1991-01-01

Requirements are presented for an experiment designed to obtain data for the pressurization and expulsion of a cryogenic supply tank in a low gravity environment. These requirements are of a generic nature and applicable to any cryogenic fluid of interest, condensible or non-condensible pressurants, and various low gravity test platforms such as the Space Shuttle or a free-flyer. Background information, the thermophysical process, preliminary analytical modeling, and experimental requirements are discussed. Key parameters, measurements, hardware requirements, procedures, a test matrix, and data analysis are outlined.

Essential equivalence of the general equation for the nonequilibrium reversible-irreversible coupling (GENERIC) and steepest-entropy-ascent models of dissipation for nonequilibrium thermodynamics.

PubMed

Montefusco, Alberto; Consonni, Francesco; Beretta, Gian Paolo

2015-04-01

By reformulating the steepest-entropy-ascent (SEA) dynamical model for nonequilibrium thermodynamics in the mathematical language of differential geometry, we compare it with the primitive formulation of the general equation for the nonequilibrium reversible-irreversible coupling (GENERIC) model and discuss the main technical differences of the two approaches. In both dynamical models the description of dissipation is of the "entropy-gradient" type. SEA focuses only on the dissipative, i.e., entropy generating, component of the time evolution, chooses a sub-Riemannian metric tensor as dissipative structure, and uses the local entropy density field as potential. GENERIC emphasizes the coupling between the dissipative and nondissipative components of the time evolution, chooses two compatible degenerate structures (Poisson and degenerate co-Riemannian), and uses the global energy and entropy functionals as potentials. As an illustration, we rewrite the known GENERIC formulation of the Boltzmann equation in terms of the square root of the distribution function adopted by the SEA formulation. We then provide a formal proof that in more general frameworks, whenever all degeneracies in the GENERIC framework are related to conservation laws, the SEA and GENERIC models of the dissipative component of the dynamics are essentially interchangeable, provided of course they assume the same kinematics. As part of the discussion, we note that equipping the dissipative structure of GENERIC with the Leibniz identity makes it automatically SEA on metric leaves.

Using a Second-Price Auction to set Military Retention Bonus Levels: An Application to the Australian Army

DTIC Science & Technology

2008-03-01

and do not reflect the official policy or position of the Department of Defense or the U.S. Government. 12a. DISTRIBUTION / AVAILABILITY STATEMENT...auction is used to set salaries levels in a generic labor market scenario. The experimental results support the literature: a second-price auction...analyses an experiment where a sealed-bid, second-price auction is used to set salaries levels in a generic labor market scenario. The experimental

Complexity of generic biochemical circuits: topology versus strength of interactions.

PubMed

Tikhonov, Mikhail; Bialek, William

2016-12-06

The historical focus on network topology as a determinant of biological function is still largely maintained today, illustrated by the rise of structure-only approaches to network analysis. However, biochemical circuits and genetic regulatory networks are defined both by their topology and by a multitude of continuously adjustable parameters, such as the strength of interactions between nodes, also recognized as important. Here we present a class of simple perceptron-based Boolean models within which comparing the relative importance of topology versus interaction strengths becomes a quantitatively well-posed problem. We quantify the intuition that for generic networks, optimization of interaction strengths is a crucial ingredient of achieving high complexity, defined here as the number of fixed points the network can accommodate. We propose a new methodology for characterizing the relative role of parameter optimization for topologies of a given class.

Utilization and costs of HIV antiretroviral drugs in Europe during the last ten years: Impact of generic antiretroviral drugs on cost reduction.

PubMed

Rwagitinywa, Joseph; Sommet, Agnès; Palmaro, Aurore; Montastruc, Jean-Louis; Lapeyre-Mestre, Maryse

2018-03-01

Simulation studies showed that generic antiretroviral (ARV) drug utilization could lead to significant cost reduction of HIV treatment in developed world. This study aimed to quantify ARV utilization and costs in European countries between 2006 and 2015. We also assessed the impact of generic ARV drug utilization on cost reduction in real-life. ARV drug utilization in 14 European countries (France, Italy, Germany, Denmark, Netherlands, Norway, Sweden, Finland, Iceland, Croatia, Czech Republic, Estonia, Latvia, and Lithuania) were analysed using defined daily dose (DDD)/1000 inhabitants/year. ARV drug cost was estimated in million euro/year and euro/1000 inhabitants/year. The impact of generics on cost reduction was assessed in three countries: France, Denmark, and Czech Republic, using four parameters: expected savings, observed savings, brand price-reduction savings and overall savings. Between 2006 and 2015, median ARV drug utilization increased from 234 DDDs per 1000 inhabitants per year (IQR 124-388) to 385 (229-670). The median cost increased from €3751/1000 inhabitants/year (1109-4681) to €9158 (3269-10,646). Between 2013 and 2015, overall savings of €0.9, €1.6, and €33.7 million were respectively observed in Denmark, Czech Republic, and France. Overall savings observed in real-life from generic ARV drugs in Denmark were related to high rate of low-price generic utilization, contrarily to France and Czech Republic where these were more related to brand price-reduction than generic utilization itself. Copyright © 2018 Elsevier B.V. All rights reserved.

Superthermal photon bunching in terms of simple probability distributions

NASA Astrophysics Data System (ADS)

Lettau, T.; Leymann, H. A. M.; Melcher, B.; Wiersig, J.

2018-05-01

We analyze the second-order photon autocorrelation function g(2 ) with respect to the photon probability distribution and discuss the generic features of a distribution that results in superthermal photon bunching [g(2 )(0 ) >2 ]. Superthermal photon bunching has been reported for a number of optical microcavity systems that exhibit processes such as superradiance or mode competition. We show that a superthermal photon number distribution cannot be constructed from the principle of maximum entropy if only the intensity and the second-order autocorrelation are given. However, for bimodal systems, an unbiased superthermal distribution can be constructed from second-order correlations and the intensities alone. Our findings suggest modeling superthermal single-mode distributions by a mixture of a thermal and a lasinglike state and thus reveal a generic mechanism in the photon probability distribution responsible for creating superthermal photon bunching. We relate our general considerations to a physical system, i.e., a (single-emitter) bimodal laser, and show that its statistics can be approximated and understood within our proposed model. Furthermore, the excellent agreement of the statistics of the bimodal laser and our model reveals that the bimodal laser is an ideal source of bunched photons, in the sense that it can generate statistics that contain no other features but the superthermal bunching.

Resonance-induced multimodal body-size distributions in ecosystems

PubMed Central

Lampert, Adam; Tlusty, Tsvi

2013-01-01

The size of an organism reflects its metabolic rate, growth rate, mortality, and other important characteristics; therefore, the distribution of body size is a major determinant of ecosystem structure and function. Body-size distributions often are multimodal, with several peaks of abundant sizes, and previous studies suggest that this is the outcome of niche separation: species from distinct peaks avoid competition by consuming different resources, which results in selection of different sizes in each niche. However, this cannot explain many ecosystems with several peaks competing over the same niche. Here, we suggest an alternative, generic mechanism underlying multimodal size distributions, by showing that the size-dependent tradeoff between reproduction and resource utilization entails an inherent resonance that may induce multiple peaks, all competing over the same niche. Our theory is well fitted to empirical data in various ecosystems, in which both model and measurements show a multimodal, periodically peaked distribution at larger sizes, followed by a smooth tail at smaller sizes. Moreover, we show a universal pattern of size distributions, manifested in the collapse of data from ecosystems of different scales: phytoplankton in a lake, metazoans in a stream, and arthropods in forests. The demonstrated resonance mechanism is generic, suggesting that multimodal distributions of numerous ecological characters emerge from the interplay between local competition and global migration. PMID:23248320

An Approximate Solution and Master Curves for Buckling of Symmetrically Laminated Composite Cylinders

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

2013-01-01

Nondimensional linear-bifurcation buckling equations for balanced, symmetrically laminated cylinders with negligible shell-wall anisotropies and subjected to uniform axial compression loads are presented. These equations are solved exactly for the practical case of simply supported ends. Nondimensional quantities are used to characterize the buckling behavior that consist of a stiffness-weighted length-to-radius parameter, a stiffness-weighted shell-thinness parameter, a shell-wall nonhomogeneity parameter, two orthotropy parameters, and a nondimensional buckling load. Ranges for the nondimensional parameters are established that encompass a wide range of laminated-wall constructions and numerous generic plots of nondimensional buckling load versus a stiffness-weighted length-to-radius ratio are presented for various combinations of the other parameters. These plots are expected to include many practical cases of interest to designers. Additionally, these plots show how the parameter values affect the distribution and size of the festoons forming each response curve and how they affect the attenuation of each response curve to the corresponding solution for an infinitely long cylinder. To aid in preliminary design studies, approximate formulas for the nondimensional buckling load are derived, and validated against the corresponding exact solution, that give the attenuated buckling response of an infinitely long cylinder in terms of the nondimensional parameters presented herein. A relatively small number of "master curves" are identified that give a nondimensional measure of the buckling load of an infinitely long cylinder as a function of the orthotropy and wall inhomogeneity parameters. These curves reduce greatly the complexity of the design-variable space as compared to representations that use dimensional quantities as design variables. As a result of their inherent simplicity, these master curves are anticipated to be useful in the ongoing development of buckling-design technology.

Enhanced Representation of Soil NO Emissions in the Community Multiscale Air Quality (CMAQ) Model Version 5.0.2

NASA Technical Reports Server (NTRS)

Rasool, Quazi Z.; Zhang, Rui; Lash, Benjamin; Cohan, Daniel S.; Cooter, Ellen J.; Bash, Jesse O.; Lamsal, Lok N.

2016-01-01

Modeling of soil nitric oxide (NO) emissions is highly uncertain and may misrepresent its spatial and temporal distribution. This study builds upon a recently introduced parameterization to improve the timing and spatial distribution of soil NO emission estimates in the Community Multiscale Air Quality (CMAQ) model. The parameterization considers soil parameters, meteorology, land use, and mineral nitrogen (N) availability to estimate NO emissions. We incorporate daily year-specific fertilizer data from the Environmental Policy Integrated Climate (EPIC) agricultural model to replace the annual generic data of the initial parameterization, and use a 12km resolution soil biome map over the continental USA. CMAQ modeling for July 2011 shows slight differences in model performance in simulating fine particulate matter and ozone from Interagency Monitoring of Protected Visual Environments (IMPROVE) and Clean Air Status and Trends Network (CASTNET) sites and NO2 columns from Ozone Monitoring Instrument (OMI) satellite retrievals. We also simulate how the change in soil NO emissions scheme affects the expected O3 response to projected emissions reductions.

Path-integral formalism for stochastic resetting: Exactly solved examples and shortcuts to confinement

NASA Astrophysics Data System (ADS)

Roldán, Édgar; Gupta, Shamik

2017-08-01

We study the dynamics of overdamped Brownian particles diffusing in conservative force fields and undergoing stochastic resetting to a given location at a generic space-dependent rate of resetting. We present a systematic approach involving path integrals and elements of renewal theory that allows us to derive analytical expressions for a variety of statistics of the dynamics such as (i) the propagator prior to first reset, (ii) the distribution of the first-reset time, and (iii) the spatial distribution of the particle at long times. We apply our approach to several representative and hitherto unexplored examples of resetting dynamics. A particularly interesting example for which we find analytical expressions for the statistics of resetting is that of a Brownian particle trapped in a harmonic potential with a rate of resetting that depends on the instantaneous energy of the particle. We find that using energy-dependent resetting processes is more effective in achieving spatial confinement of Brownian particles on a faster time scale than performing quenches of parameters of the harmonic potential.

On the Coupling Time of the Heat-Bath Process for the Fortuin-Kasteleyn Random-Cluster Model

NASA Astrophysics Data System (ADS)

Collevecchio, Andrea; Elçi, Eren Metin; Garoni, Timothy M.; Weigel, Martin

2018-01-01

We consider the coupling from the past implementation of the random-cluster heat-bath process, and study its random running time, or coupling time. We focus on hypercubic lattices embedded on tori, in dimensions one to three, with cluster fugacity at least one. We make a number of conjectures regarding the asymptotic behaviour of the coupling time, motivated by rigorous results in one dimension and Monte Carlo simulations in dimensions two and three. Amongst our findings, we observe that, for generic parameter values, the distribution of the appropriately standardized coupling time converges to a Gumbel distribution, and that the standard deviation of the coupling time is asymptotic to an explicit universal constant multiple of the relaxation time. Perhaps surprisingly, we observe these results to hold both off criticality, where the coupling time closely mimics the coupon collector's problem, and also at the critical point, provided the cluster fugacity is below the value at which the transition becomes discontinuous. Finally, we consider analogous questions for the single-spin Ising heat-bath process.

Effects of ultrasound on polymeric foam porosity.

PubMed

Torres-Sanchez, C; Corney, J R

2008-04-01

A variety of materials require functionally graded cellular microstructures whose porosity is engineered to meet specific applications (e.g. mimic bone structure for orthopaedic applications; fulfil mechanical, thermal or acoustic constraints in structural foamed components, etc.). Although a huge variety of foams can be manufactured with homogenous porosity, there are no generic processes for controlling the distribution of porosity within the resulting matrix. Motivated by the desire to create a flexible process for engineering heterogeneous foams, the authors have investigated how ultrasound, applied during the formation of a polyurethane foam, affects its cellular structure. The experimental results demonstrated how the parameters of ultrasound exposure (i.e. frequency and applied power) influenced the volume and distribution of pores within the final polyurethane matrix: the data demonstrates that porosity (i.e. volume fraction) varies in direct proportion to both the acoustic pressure and frequency of the ultrasound signal. The effects of ultrasound on porosity demonstrated by this work offer the prospect of a manufacturing process that can adjust the cellular geometry of foam and hence ensure that the resulting characteristics match the functional requirements.

Inferring transit time distributions from atmospheric tracer data: Assessment of the predictive capacities of Lumped Parameter Models on a 3D crystalline aquifer model

NASA Astrophysics Data System (ADS)

Marçais, J.; de Dreuzy, J.-R.; Ginn, T. R.; Rousseau-Gueutin, P.; Leray, S.

2015-06-01

While central in groundwater resources and contaminant fate, Transit Time Distributions (TTDs) are never directly accessible from field measurements but always deduced from a combination of tracer data and more or less involved models. We evaluate the predictive capabilities of approximate distributions (Lumped Parameter Models abbreviated as LPMs) instead of fully developed aquifer models. We develop a generic assessment methodology based on synthetic aquifer models to establish references for observable quantities as tracer concentrations and prediction targets as groundwater renewal times. Candidate LPMs are calibrated on the observable tracer concentrations and used to infer renewal time predictions, which are compared with the reference ones. This methodology is applied to the produced crystalline aquifer of Plœmeur (Brittany, France) where flows leak through a micaschists aquitard to reach a sloping aquifer where they radially converge to the producing well, issuing broad rather than multi-modal TTDs. One, two and three parameters LPMs were calibrated to a corresponding number of simulated reference anthropogenic tracer concentrations (CFC-11, 85Kr and SF6). Extensive statistical analysis over the aquifer shows that a good fit of the anthropogenic tracer concentrations is neither a necessary nor a sufficient condition to reach acceptable predictive capability. Prediction accuracy is however strongly conditioned by the use of a priori relevant LPMs. Only adequate LPM shapes yield unbiased estimations. In the case of Plœmeur, relevant LPMs should have two parameters to capture the mean and the standard deviation of the residence times and cover the first few decades [0; 50 years]. Inverse Gaussian and shifted exponential performed equally well for the wide variety of the reference TTDs from strongly peaked in recharge zones where flows are diverging to broadly distributed in more converging zones. When using two sufficiently different atmospheric tracers like CFC-11 and 85Kr, groundwater renewal time predictions are accurate at 1-5 years for estimating mean transit times of some decades (10-50 years). 1-parameter LPMs calibrated on a single atmospheric tracer lead to substantially larger errors of the order of 10 years, while 3-parameter LPMs calibrated with a third atmospheric tracers (SF6) do not improve the prediction capabilities. Based on a specific site, this study highlights the high predictive capacities of two atmospheric tracers on the same time range with sufficiently different atmospheric concentration chronicles.

Generic solar photovoltaic system dynamic simulation model specification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ellis, Abraham; Behnke, Michael Robert; Elliott, Ryan Thomas

This document is intended to serve as a specification for generic solar photovoltaic (PV) system positive-sequence dynamic models to be implemented by software developers and approved by the WECC MVWG for use in bulk system dynamic simulations in accordance with NERC MOD standards. Two specific dynamic models are included in the scope of this document. The first, a Central Station PV System model, is intended to capture the most important dynamic characteristics of large scale (> 10 MW) PV systems with a central Point of Interconnection (POI) at the transmission level. The second, a Distributed PV System model, is intendedmore » to represent an aggregation of smaller, distribution-connected systems that comprise a portion of a composite load that might be modeled at a transmission load bus.« less

Generalized susceptibilities and Landau parameters for anisotropic Fermi liquids

NASA Astrophysics Data System (ADS)

Rodríguez-Ponte, P.; Cabra, D.; Grandi, N.

2015-05-01

We study Fermi liquids (FLs) with a Fermi surface that lacks continuous rotational invariance and in the presence of an arbitrary quartic interaction. We obtain the expressions of the generalized static susceptibilities that measure the linear response of a generic order parameter to a perturbation of the Hamiltonian. We apply our formulae to the spin and charge susceptibilities. Based on the resulting expressions, we make a proposal for the definition of the Landau parameters in nonisotropic FL.

Uptake and localization mechanisms of fluorescent and colored lipid probes. Part 2. QSAR models that predict localization of fluorescent probes used to identify ("specifically stain") various biomembranes and membranous organelles.

PubMed

Horobin, R W; Stockert, J C; Rashid-Doubell, F

2015-05-01

We discuss a variety of biological targets including generic biomembranes and the membranes of the endoplasmic reticulum, endosomes/lysosomes, Golgi body, mitochondria (outer and inner membranes) and the plasma membrane of usual fluidity. For each target, we discuss the access of probes to the target membrane, probe uptake into the membrane and the mechanism of selectivity of the probe uptake. A statement of the QSAR decision rule that describes the required physicochemical features of probes that enable selective staining also is provided, followed by comments on exceptions and limits. Examples of probes typically used to demonstrate each target structure are noted and decision rule tabulations are provided for probes that localize in particular targets; these tabulations show distribution of probes in the conceptual space defined by the relevant structure parameters ("parameter space"). Some general implications and limitations of the QSAR models for probe targeting are discussed including the roles of certain cell and protocol factors that play significant roles in lipid staining. A case example illustrates the predictive ability of QSAR models. Key limiting values of the head group hydrophilicity parameter associated with membrane-probe interactions are discussed in an appendix.

Some design constraints required for the assembly of software components: The incorporation of atomic abstract types into generically structured abstract types

NASA Technical Reports Server (NTRS)

Johnson, Charles S.

1986-01-01

It is nearly axiomatic, that to take the greatest advantage of the useful features available in a development system, and to avoid the negative interactions of those features, requires the exercise of a design methodology which constrains their use. A major design support feature of the Ada language is abstraction: for data, functions processes, resources, and system elements in general. Atomic abstract types can be created in packages defining those private types and all of the overloaded operators, functions, and hidden data required for their use in an application. Generically structured abstract types can be created in generic packages defining those structured private types, as buildups from the user-defined data types which are input as parameters. A study is made of the design constraints required for software incorporating either atomic or generically structured abstract types, if the integration of software components based on them is to be subsequently performed. The impact of these techniques on the reusability of software and the creation of project-specific software support environments is also discussed.

A randomized, crossover pharmacokinetic study comparing generic tacrolimus vs. the reference formulation in subpopulations of kidney transplant patients.

PubMed

Bloom, R D; Trofe-Clark, J; Wiland, A; Alloway, R R

2013-01-01

An exploratory, post hoc analysis was performed using data from a prospective, multicenter, open-label, randomized, two-period (14 d per period), two-sequence, crossover, steady-state pharmacokinetic study comparing generic tacrolimus (Sandoz) vs. reference tacrolimus in stable renal transplant patients receiving their pre-study twice-daily dose. Pharmacokinetic parameters were compared in 68 patients according to gender, African American ethnicity, the presence or absence of diabetes, and use of steroids. The ratios of tacrolimus AUC0-12 h , Cmax , and C12 with generic vs. reference tacrolimus were calculated using the geometric mean (GM) of dose-normalized values at days 14 and 28. Mean (SD) tacrolimus dose at baseline was 5.7 (4.2) mg/d. There were no consistent differences in dose-normalized AUC0-12 h , C12 , Cmax, or tmax between the generic and reference preparations within subpopulations. The 90% confidence intervals (CI) for the ratios of dose-normalized AUC0-12 h and C12 with generic vs. reference tacrolimus were within 80-125% for all subpopulations, as were 90% CIs for Cmax other than for females, African Americans, and non-diabetics, which is not unexpected given the wide variability of tacrolimus Cmax and the small subpopulation sizes. These exploratory results suggest that this generic tacrolimus preparation would be expected to offer comparable bioavailability to the reference drug in these patient subpopulations. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Differentiating low-molecular-weight heparins based on chemical, biological, and pharmacologic properties: implications for the development of generic versions of low-molecular-weight heparins.

PubMed

Jeske, Walter P; Walenga, Jeanine M; Hoppensteadt, Debra A; Vandenberg, Curtis; Brubaker, Aleah; Adiguzel, Cafer; Bakhos, Mamdouh; Fareed, Jawed

2008-02-01

Low-molecular-weight heparins (LMWHs) are polypharmacologic drugs used to treat thrombotic and cardiovascular disorders. These drugs are manufactured using different chemical and enzymatic methods, resulting in products with distinct chemical and pharmacologic profiles. Generic LMWHs have been introduced in Asia and South America, and several generic suppliers are seeking regulatory approval in the United States and the European Union. For simple small-molecule drugs, generic drugs have the same chemical structure, potency, and bioavailability as the innovator drug. Applying this definition to complex biological products such as the LMWHs has proved difficult. One major issue is defining appropriate criteria to demonstrate bioequivalence; pharmacopoeial specifications alone appear to be inadequate. Whereas available generic versions of LMWHs exhibit similar molecular and pharmacopoeial profiles, marked differences in their biological and pharmacologic behavior have been noted. Preliminary studies have demonstrated differences in terms of anti-Xa activity and tissue factor pathway inhibitor release after subcutaneous administration, as well as antiplatelet and profibrinolytic effects. The current data emphasize the need to consider multiple functional parameters when defining bioequivalence of biologic drugs with complex structures and activities and also underscore the importance of further pharmacologic studies involving animal models and human clinical trials. The U.S. Food and Drug Administration and the European Medicine Evaluation Agency are currently developing guidelines for the acceptance of biosimilar agents including LMWHs. Until such guidelines are complete, generic interchange may not be feasible.

Buckling Behavior of Long Anisotropic Plates Subjected to Elastically Restrained Thermal Expansion and Contraction

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

2004-01-01

An approach for synthesizing buckling results for thin balanced and unbalanced symmetric laminates that are subjected to uniform heating or cooling and elastically restrained against thermal expansion or contraction is presented. This approach uses a nondimensional analysis for infinitely long, flexural anisotropic plates that are subjected to combined mechanical loads. In addition, stiffness-weighted laminate thermal-expansion parameters and compliance coefficients are derived that are used to determine critical temperatures in terms of physically intuitive mechanical-buckling coefficients. Many results are presented for some common laminates that are intended to facilitate a structural designer s transition to the use of the generic buckling design curves. Several curves that illustrate the fundamental parameters used in the analysis are presented, for nine contemporary material systems, that provide physical insight into the buckling response in addition to providing useful design data. Examples are presented that demonstrate the use of the generic design curves.

Methodology for the systems engineering process. Volume 2: Technical parameters

NASA Technical Reports Server (NTRS)

Nelson, J. H.

1972-01-01

A scheme based on starting the logic networks from the development and mission factors that are of primary concern in an aerospace system is described. This approach required identifying the primary states (design, design verification, premission, mission, postmission), identifying the attributes within each state (performance capability, survival, evaluation, operation, etc), and then developing the generic relationships of variables for each branch. To illustrate this concept, a system was used that involved a launch vehicle and payload for an earth orbit mission. Examination showed that this example was sufficient to illustrate the concept. A more complicated mission would follow the same basic approach, but would have more extensive sets of generic trees and more correlation points between branches. It has been shown that in each system state (production, test, and use), a logic could be developed to order and classify the parameters involved in the translation from general requirements to specific requirements for system elements.

Application of an Unstructured Grid Navier-Stokes Solver to a Generic Helicopter Boby: Comparison of Unstructured Grid Results with Structured Grid Results and Experimental Results

NASA Technical Reports Server (NTRS)

Mineck, Raymond E.

1999-01-01

An unstructured-grid Navier-Stokes solver was used to predict the surface pressure distribution, the off-body flow field, the surface flow pattern, and integrated lift and drag coefficients on the ROBIN configuration (a generic helicopter) without a rotor at four angles of attack. The results are compared to those predicted by two structured- grid Navier-Stokes solvers and to experimental surface pressure distributions. The surface pressure distributions from the unstructured-grid Navier-Stokes solver are in good agreement with the results from the structured-grid Navier-Stokes solvers. Agreement with the experimental pressure coefficients is good over the forward portion of the body. However, agreement is poor on the lower portion of the mid-section of the body. Comparison of the predicted surface flow patterns showed similar regions of separated flow. Predicted lift and drag coefficients were in fair agreement with each other.

Loading relativistic Maxwell distributions in particle simulations

NASA Astrophysics Data System (ADS)

Zenitani, Seiji

2015-04-01

Numerical algorithms to load relativistic Maxwell distributions in particle-in-cell (PIC) and Monte-Carlo simulations are presented. For stationary relativistic Maxwellian, the inverse transform method and the Sobol algorithm are reviewed. To boost particles to obtain relativistic shifted-Maxwellian, two rejection methods are proposed in a physically transparent manner. Their acceptance efficiencies are ≈50 % for generic cases and 100% for symmetric distributions. They can be combined with arbitrary base algorithms.

Low Concentration of Salmonella enterica and Generic Escherichia coli in Farm Ponds and Irrigation Distribution Systems Used for Mixed Produce Production in Southern Georgia.

PubMed

Antaki, Elizabeth M; Vellidis, George; Harris, Casey; Aminabadi, Peiman; Levy, Karen; Jay-Russell, Michele T

2016-10-01

Studies have shown that irrigation water can be a vector for pathogenic bacteria. Due to this, the Food Safety Modernization Act's (FSMA) produce safety rule requires that agricultural water directly applied to produce be safe and of adequate sanitary quality for use, which may pose a challenge for some farmers. The purpose of this research was to assess the presence and concentration of Salmonella and generic Escherichia coli in irrigation water from distribution systems in a mixed produce production region of southern Georgia. Water samples were collected during three growing seasons at three farms irrigating crops with surface water (Pond 1, Pond 2) or groundwater (Well) during 2012-2013. Salmonella and generic E. coli populations were monitored by culture and Most Probable Number (MPN). Confirmed isolates were characterized by pulsed-field gel electrophoresis and serotyping. In Pond 1, Salmonella was detected in 2/21 surface, 5/26 subsurface, 10/50 center pivot, and 0/16 solid set sprinkler head water samples. In Pond 2, Salmonella was detected in 2/18 surface, 1/18 subsurface, 6/36 drip line start, and 8/36 drip line end water samples. Twenty-six well pumps and 64 associated drip line water samples were negative. The overall mean Salmonella concentration for positive water samples was 0.03 MPN/100 mL (range <0.0011-1.8 MPN/100 mL). Nine Salmonella serovars comprising 22 pulsotypes were identified. Identical serovars and subtypes were found three times on the same day and location: Pond 1-Pivot-Cantaloupe (serovar Rubislaw), Pond 1-Pivot-Peanut (serovar Saintpaul), and Pond 2-Drip Line Start-Drip Line End-Yellow Squash (serovar III_16z10:e,n,x,z15). Generic E. coli was detected in water from both farm ponds and irrigation distribution systems, but the concentrations met FSMA microbial water quality criteria. The results from this study will allow producers in southern Georgia to better understand how potential pathogens move through irrigation distribution systems.

User's Guide for the Agricultural Non-Point Source (AGNPS) Pollution Model Data Generator

USGS Publications Warehouse

Finn, Michael P.; Scheidt, Douglas J.; Jaromack, Gregory M.

2003-01-01

BACKGROUND Throughout this user guide, we refer to datasets that we used in conjunction with developing of this software for supporting cartographic research and producing the datasets to conduct research. However, this software can be used with these datasets or with more 'generic' versions of data of the appropriate type. For example, throughout the guide, we refer to national land cover data (NLCD) and digital elevation model (DEM) data from the U.S. Geological Survey (USGS) at a 30-m resolution, but any digital terrain model or land cover data at any appropriate resolution will produce results. Another key point to keep in mind is to use a consistent data resolution for all the datasets per model run. The U.S. Department of Agriculture (USDA) developed the Agricultural Nonpoint Source (AGNPS) pollution model of watershed hydrology in response to the complex problem of managing nonpoint sources of pollution. AGNPS simulates the behavior of runoff, sediment, and nutrient transport from watersheds that have agriculture as their prime use. The model operates on a cell basis and is a distributed parameter, event-based model. The model requires 22 input parameters. Output parameters are grouped primarily by hydrology, sediment, and chemical output (Young and others, 1995.) Elevation, land cover, and soil are the base data from which to extract the 22 input parameters required by the AGNPS. For automatic parameter extraction, follow the general process described in this guide of extraction from the geospatial data through the AGNPS Data Generator to generate input parameters required by the pollution model (Finn and others, 2002.)

Technology-enhanced Interactive Teaching of Marginal, Joint and Conditional Probabilities: The Special Case of Bivariate Normal Distribution

PubMed Central

Dinov, Ivo D.; Kamino, Scott; Bhakhrani, Bilal; Christou, Nicolas

2014-01-01

Summary Data analysis requires subtle probability reasoning to answer questions like What is the chance of event A occurring, given that event B was observed? This generic question arises in discussions of many intriguing scientific questions such as What is the probability that an adolescent weighs between 120 and 140 pounds given that they are of average height? and What is the probability of (monetary) inflation exceeding 4% and housing price index below 110? To address such problems, learning some applied, theoretical or cross-disciplinary probability concepts is necessary. Teaching such courses can be improved by utilizing modern information technology resources. Students’ understanding of multivariate distributions, conditional probabilities, correlation and causation can be significantly strengthened by employing interactive web-based science educational resources. Independent of the type of a probability course (e.g. majors, minors or service probability course, rigorous measure-theoretic, applied or statistics course) student motivation, learning experiences and knowledge retention may be enhanced by blending modern technological tools within the classical conceptual pedagogical models. We have designed, implemented and disseminated a portable open-source web-application for teaching multivariate distributions, marginal, joint and conditional probabilities using the special case of bivariate Normal distribution. A real adolescent height and weight dataset is used to demonstrate the classroom utilization of the new web-application to address problems of parameter estimation, univariate and multivariate inference. PMID:25419016

A synchrotron-based local computed tomography combined with data-constrained modelling approach for quantitative analysis of anthracite coal microstructure

PubMed Central

Chen, Wen Hao; Yang, Sam Y. S.; Xiao, Ti Qiao; Mayo, Sherry C.; Wang, Yu Dan; Wang, Hai Peng

2014-01-01

Quantifying three-dimensional spatial distributions of pores and material compositions in samples is a key materials characterization challenge, particularly in samples where compositions are distributed across a range of length scales, and where such compositions have similar X-ray absorption properties, such as in coal. Consequently, obtaining detailed information within sub-regions of a multi-length-scale sample by conventional approaches may not provide the resolution and level of detail one might desire. Herein, an approach for quantitative high-definition determination of material compositions from X-ray local computed tomography combined with a data-constrained modelling method is proposed. The approach is capable of dramatically improving the spatial resolution and enabling finer details within a region of interest of a sample larger than the field of view to be revealed than by using conventional techniques. A coal sample containing distributions of porosity and several mineral compositions is employed to demonstrate the approach. The optimal experimental parameters are pre-analyzed. The quantitative results demonstrated that the approach can reveal significantly finer details of compositional distributions in the sample region of interest. The elevated spatial resolution is crucial for coal-bed methane reservoir evaluation and understanding the transformation of the minerals during coal processing. The method is generic and can be applied for three-dimensional compositional characterization of other materials. PMID:24763649

Technology-enhanced Interactive Teaching of Marginal, Joint and Conditional Probabilities: The Special Case of Bivariate Normal Distribution.

PubMed

Dinov, Ivo D; Kamino, Scott; Bhakhrani, Bilal; Christou, Nicolas

2013-01-01

Data analysis requires subtle probability reasoning to answer questions like What is the chance of event A occurring, given that event B was observed? This generic question arises in discussions of many intriguing scientific questions such as What is the probability that an adolescent weighs between 120 and 140 pounds given that they are of average height? and What is the probability of (monetary) inflation exceeding 4% and housing price index below 110? To address such problems, learning some applied, theoretical or cross-disciplinary probability concepts is necessary. Teaching such courses can be improved by utilizing modern information technology resources. Students' understanding of multivariate distributions, conditional probabilities, correlation and causation can be significantly strengthened by employing interactive web-based science educational resources. Independent of the type of a probability course (e.g. majors, minors or service probability course, rigorous measure-theoretic, applied or statistics course) student motivation, learning experiences and knowledge retention may be enhanced by blending modern technological tools within the classical conceptual pedagogical models. We have designed, implemented and disseminated a portable open-source web-application for teaching multivariate distributions, marginal, joint and conditional probabilities using the special case of bivariate Normal distribution. A real adolescent height and weight dataset is used to demonstrate the classroom utilization of the new web-application to address problems of parameter estimation, univariate and multivariate inference.

Conceptual framework for model-based analysis of residence time distribution in twin-screw granulation.

PubMed

Kumar, Ashish; Vercruysse, Jurgen; Vanhoorne, Valérie; Toiviainen, Maunu; Panouillot, Pierre-Emmanuel; Juuti, Mikko; Vervaet, Chris; Remon, Jean Paul; Gernaey, Krist V; De Beer, Thomas; Nopens, Ingmar

2015-04-25

Twin-screw granulation is a promising continuous alternative for traditional batchwise wet granulation processes. The twin-screw granulator (TSG) screws consist of transport and kneading element modules. Therefore, the granulation to a large extent is governed by the residence time distribution within each module where different granulation rate processes dominate over others. Currently, experimental data is used to determine the residence time distributions. In this study, a conceptual model based on classical chemical engineering methods is proposed to better understand and simulate the residence time distribution in a TSG. The experimental data were compared with the proposed most suitable conceptual model to estimate the parameters of the model and to analyse and predict the effects of changes in number of kneading discs and their stagger angle, screw speed and powder feed rate on residence time. The study established that the kneading block in the screw configuration acts as a plug-flow zone inside the granulator. Furthermore, it was found that a balance between the throughput force and conveying rate is required to obtain a good axial mixing inside the twin-screw granulator. Although the granulation behaviour is different for other excipients, the experimental data collection and modelling methods applied in this study are generic and can be adapted to other excipients. Copyright © 2015 Elsevier B.V. All rights reserved.

Data mining spacecraft telemetry: towards generic solutions to automatic health monitoring and status characterisation

NASA Astrophysics Data System (ADS)

Royer, P.; De Ridder, J.; Vandenbussche, B.; Regibo, S.; Huygen, R.; De Meester, W.; Evans, D. J.; Martinez, J.; Korte-Stapff, M.

2016-07-01

We present the first results of a study aimed at finding new and efficient ways to automatically process spacecraft telemetry for automatic health monitoring. The goal is to reduce the load on the flight control team while extending the "checkability" to the entire telemetry database, and provide efficient, robust and more accurate detection of anomalies in near real time. We present a set of effective methods to (a) detect outliers in the telemetry or in its statistical properties, (b) uncover and visualise special properties of the telemetry and (c) detect new behavior. Our results are structured around two main families of solutions. For parameters visiting a restricted set of signal values, i.e. all status parameters and about one third of all the others, we focus on a transition analysis, exploiting properties of Poincare plots. For parameters with an arbitrarily high number of possible signal values, we describe the statistical properties of the signal via its Kernel Density Estimate. We demonstrate that this allows for a generic and dynamic approach of the soft-limit definition. Thanks to a much more accurate description of the signal and of its time evolution, we are more sensitive and more responsive to outliers than the traditional checks against hard limits. Our methods were validated on two years of Venus Express telemetry. They are generic for assisting in health monitoring of any complex system with large amounts of diagnostic sensor data. Not only spacecraft systems but also present-day astronomical observatories can benefit from them.

Benchmarks for Expected Annual Academic Growth for Students in the Bottom Quartile of the Normative Distribution

ERIC Educational Resources Information Center

Scammacca, Nancy K.; Fall, Anna-Mária; Roberts, Greg

2015-01-01

Effect sizes are commonly reported for the results of educational interventions. However, researchers struggle with interpreting their magnitude in a way that transcends generic guidelines. Effect sizes can be interpreted in a meaningful context by benchmarking them against typical growth for students in the normative distribution. Such benchmarks…

Backscattering enhancement for Marshall-Palmer distributed rains for a W-band nadir-pointing radar with a finite beam width

NASA Technical Reports Server (NTRS)

Kobayashi, Satoru; Tanelli, Simone; Im, Eastwood; Oguchi, Tomohiro

2005-01-01

In this paper, we expand the previous theory to be applied to a generic drop size distribution with spheroidal raindrops including spherical raindrops. Results will be used to discuss the multiple scattering effects on the backscatter measurements acquired by a W-band nadir-pointing radar.

Investigation of an alternative generic model for predicting pharmacokinetic changes during physiological stress.

PubMed

Peng, Henry T; Edginton, Andrea N; Cheung, Bob

2013-10-01

Physiologically based pharmacokinetic models were developed using MATLAB Simulink® and PK-Sim®. We compared the capability and usefulness of these two models by simulating pharmacokinetic changes of midazolam under exercise and heat stress to verify the usefulness of MATLAB Simulink® as a generic PBPK modeling software. Although both models show good agreement with experimental data obtained under resting condition, their predictions of pharmacokinetics changes are less accurate in the stressful conditions. However, MATLAB Simulink® may be more flexible to include physiologically based processes such as oral absorption and simulate various stress parameters such as stress intensity, duration and timing of drug administration to improve model performance. Further work will be conducted to modify algorithms in our generic model developed using MATLAB Simulink® and to investigate pharmacokinetics under other physiological stress such as trauma. © The Author(s) 2013.

Generic Stellarator-like Magnetic Fusion Reactor

NASA Astrophysics Data System (ADS)

Sheffield, John; Spong, Donald

2015-11-01

The Generic Magnetic Fusion Reactor paper, published in 1985, has been updated, reflecting the improved science and technology base in the magnetic fusion program. Key changes beyond inflation are driven by important benchmark numbers for technologies and costs from ITER construction, and the use of a more conservative neutron wall flux and fluence in modern fusion reactor designs. In this paper the generic approach is applied to a catalyzed D-D stellarator-like reactor. It is shown that an interesting power plant might be possible if the following parameters could be achieved for a reference reactor: R/ < a > ~ 4 , confinement factor, fren = 0.9-1.15, < β > ~ 8 . 0 -11.5 %, Zeff ~ 1.45 plus a relativistic temperature correction, fraction of fast ions lost ~ 0.07, Bm ~ 14-16 T, and R ~ 18-24 m. J. Sheffield was supported under ORNL subcontract 4000088999 with the University of Tennessee.

Perceptions of the quality of generic medicines: implications for trust in public services within the local health system in Tumkur, India.

PubMed

Aivalli, Praveen Kumar; Elias, Maya Annie; Pati, Manoj Kumar; Bhanuprakash, Srinath; Munegowda, Chikkagollahalli; Shroff, Zubin Cyrus; Srinivas, Prashanth N

2017-01-01

Generic medicines are an important policy option to reduce out-of-pocket expenditure on medicines. However, negative perceptions of their quality affect utilisation and raise issues of confidence and trust in medicines and health services. The aim of the study was to test the quality of generic and branded medicines and explain negative perceptions towards generic medicines. The study was part of a larger study on access to medicines. Information on various quality parameters was collected for branded medicines and branded and unbranded generic versions of the same medicines from government and private pharmacies in Karnataka in Southern India. To assess perceptions related to quality and drivers of preferred point of care (public vs private), focus group discussions were conducted with diabetes and hypertension patients, health workers and private pharmacists. The results of the quality tests were assessed and thematic analysis was conducted on the qualitative data to develop a conceptual framework to explain perceptions of medicine and care quality in the local health system. The generic and branded variants of the medicines tested were of comparable quality. Contrary to the quality test results, patients' and health workers' perceptions of quality were largely in favour of branded medicines. Negative perceptions of medicine quality along with other drivers contribute towards choosing more expensive medicines in the private sector. Trust in the health system emerged as an underlying central theme that explained and drove choice of medicines and providers within the local health system. Negative perceptions of generic medicines and preferential promotion of branded medicines over generics by pharmaceutical companies could influence prescriber behaviour and affect trust in healthcare provided in public services. To succeed, access to medicines programmes need to systematically invest in information on quality of medicines and develop strategies to build trust in healthcare offered in government health services.

Perceptions of the quality of generic medicines: implications for trust in public services within the local health system in Tumkur, India

PubMed Central

Aivalli, Praveen Kumar; Elias, Maya Annie; Pati, Manoj Kumar; Bhanuprakash, Srinath; Munegowda, Chikkagollahalli; Shroff, Zubin Cyrus

2017-01-01

Introduction Generic medicines are an important policy option to reduce out-of-pocket expenditure on medicines. However, negative perceptions of their quality affect utilisation and raise issues of confidence and trust in medicines and health services. The aim of the study was to test the quality of generic and branded medicines and explain negative perceptions towards generic medicines. Methods The study was part of a larger study on access to medicines. Information on various quality parameters was collected for branded medicines and branded and unbranded generic versions of the same medicines from government and private pharmacies in Karnataka in Southern India. To assess perceptions related to quality and drivers of preferred point of care (public vs private), focus group discussions were conducted with diabetes and hypertension patients, health workers and private pharmacists. The results of the quality tests were assessed and thematic analysis was conducted on the qualitative data to develop a conceptual framework to explain perceptions of medicine and care quality in the local health system. Results The generic and branded variants of the medicines tested were of comparable quality. Contrary to the quality test results, patients’ and health workers’ perceptions of quality were largely in favour of branded medicines. Negative perceptions of medicine quality along with other drivers contribute towards choosing more expensive medicines in the private sector. Trust in the health system emerged as an underlying central theme that explained and drove choice of medicines and providers within the local health system. Conclusion Negative perceptions of generic medicines and preferential promotion of branded medicines over generics by pharmaceutical companies could influence prescriber behaviour and affect trust in healthcare provided in public services. To succeed, access to medicines programmes need to systematically invest in information on quality of medicines and develop strategies to build trust in healthcare offered in government health services. PMID:29531844

A comprehensive study on regulatory requirements for development and filing of generic drugs globally

PubMed Central

Handoo, Shweta; Arora, Vandana; Khera, Deepak; Nandi, Prafulla Kumar; Sahu, Susanta Kumar

2012-01-01

The regulatory requirements of various countries of the world vary from each other. Therefore, it is challenging for the companies to develop a single drug which can be simultaneously submitted in all the countries for approval. The regulatory strategy for product development is essentially to be established before commencement of developmental work in order to avoid major surprises after submission of the application. The role of the regulatory authorities is to ensure the quality, safety, and efficacy of all medicines in circulation in their country. It not only includes the process of regulating and monitoring the drugs but also the process of manufacturing, distribution, and promotion of it. One of the primary challenges for regulatory authority is to ensure that the pharmaceutical products are developed as per the regulatory requirement of that country. This process involves the assessment of critical parameters during product development. PMID:23373001

Nonlinear finite amplitude torsional vibrations of cantilevers in viscous fluids

NASA Astrophysics Data System (ADS)

Aureli, Matteo; Pagano, Christopher; Porfiri, Maurizio

2012-06-01

In this paper, we study torsional vibrations of cantilever beams undergoing moderately large oscillations within a quiescent viscous fluid. The structure is modeled as an Euler-Bernoulli beam, with thin rectangular cross section, under base excitation. The distributed hydrodynamic loading experienced by the vibrating structure is described through a complex-valued hydrodynamic function which incorporates added mass and fluid damping elicited by moderately large rotations. We conduct a parametric study on the two dimensional computational fluid dynamics of a pitching rigid lamina, representative of a generic beam cross section, to investigate the dependence of the hydrodynamic function on the governing flow parameters. As the frequency and amplitude of the oscillation increase, vortex shedding and convection phenomena increase, thus resulting into nonlinear hydrodynamic damping. We derive a handleable nonlinear correction to the classical hydrodynamic function developed for small amplitude torsional vibrations for use in a reduced order nonlinear modal model and we validate theoretical results against experimental findings.

Accurate description of charge transport in organic field effect transistors using an experimentally extracted density of states

NASA Astrophysics Data System (ADS)

Roelofs, W. S. C.; Mathijssen, S. G. J.; Janssen, R. A. J.; de Leeuw, D. M.; Kemerink, M.

2012-02-01

The width and shape of the density of states (DOS) are key parameters to describe the charge transport of organic semiconductors. Here we extract the DOS using scanning Kelvin probe microscopy on a self-assembled monolayer field effect transistor (SAMFET). The semiconductor is only a single monolayer which has allowed extraction of the DOS over a wide energy range, pushing the methodology to its fundamental limit. The measured DOS consists of an exponential distribution of deep states with additional localized states on top. The charge transport has been calculated in a generic variable range-hopping model that allows any DOS as input. We show that with the experimentally extracted DOS an excellent agreement between measured and calculated transfer curves is obtained. This shows that detailed knowledge of the density of states is a prerequisite to consistently describe the transfer characteristics of organic field effect transistors.

Advances in Modal Analysis Using a Robust and Multiscale Method

NASA Astrophysics Data System (ADS)

Picard, Cécile; Frisson, Christian; Faure, François; Drettakis, George; Kry, Paul G.

2010-12-01

This paper presents a new approach to modal synthesis for rendering sounds of virtual objects. We propose a generic method that preserves sound variety across the surface of an object at different scales of resolution and for a variety of complex geometries. The technique performs automatic voxelization of a surface model and automatic tuning of the parameters of hexahedral finite elements, based on the distribution of material in each cell. The voxelization is performed using a sparse regular grid embedding of the object, which permits the construction of plausible lower resolution approximations of the modal model. We can compute the audible impulse response of a variety of objects. Our solution is robust and can handle nonmanifold geometries that include both volumetric and surface parts. We present a system which allows us to manipulate and tune sounding objects in an appropriate way for games, training simulations, and other interactive virtual environments.

Comparative Evaluation of U.S. Brand and Generic Intravenous Sodium Ferric Gluconate Complex in Sucrose Injection: Biodistribution after Intravenous Dosing in Rats

PubMed Central

Beekman, Christopher R.; Matta, Murali K.; Thomas, Christopher D.; Mohammad, Adil; Stewart, Sharron; Xu, Lin; Chockalingam, Ashok; Shea, Katherine; Sun, Dajun; Jiang, Wenlei; Patel, Vikram; Rouse, Rodney

2017-01-01

Relative biodistribution of FDA-approved innovator and generic sodium ferric gluconate (SFG) drug products was investigated to identify differences in tissue distribution of iron after intravenous dosing to rats. Three equal cohorts of 42 male Sprague-Dawley rats were created with each cohort receiving one of three treatments: (1) the innovator SFG product dosed intravenously at a concentration of 40 mg/kg; (2) the generic SFG product dosed intravenously at a concentration of 40 mg/kg; (3) saline dosed intravenously at equivalent volume to SFG products. Sampling time points were 15 min, 1 h, 8 h, 1 week, two weeks, four weeks, and six weeks post-treatment. Six rats from each group were sacrificed at each time point. Serum, femoral bone marrow, lungs, brain, heart, kidneys, liver, and spleen were harvested and evaluated for total iron concentration by ICP-MS. The ICP-MS analytical method was validated with linearity, range, accuracy, and precision. Results were determined for mean iron concentrations (µg/g) and mean total iron (whole tissue) content (µg/tissue) for each tissue of all groups at each time point. A percent of total distribution to each tissue was calculated for both products. At any given time point, the overall percent iron concentration distribution did not vary between the two SFG drugs by more than 7% in any tissue. Overall, this study demonstrated similar tissue biodistribution for the two SFG products in the examined tissues. PMID:29283393

Efficient probabilistic inference in generic neural networks trained with non-probabilistic feedback.

PubMed

Orhan, A Emin; Ma, Wei Ji

2017-07-26

Animals perform near-optimal probabilistic inference in a wide range of psychophysical tasks. Probabilistic inference requires trial-to-trial representation of the uncertainties associated with task variables and subsequent use of this representation. Previous work has implemented such computations using neural networks with hand-crafted and task-dependent operations. We show that generic neural networks trained with a simple error-based learning rule perform near-optimal probabilistic inference in nine common psychophysical tasks. In a probabilistic categorization task, error-based learning in a generic network simultaneously explains a monkey's learning curve and the evolution of qualitative aspects of its choice behavior. In all tasks, the number of neurons required for a given level of performance grows sublinearly with the input population size, a substantial improvement on previous implementations of probabilistic inference. The trained networks develop a novel sparsity-based probabilistic population code. Our results suggest that probabilistic inference emerges naturally in generic neural networks trained with error-based learning rules.Behavioural tasks often require probability distributions to be inferred about task specific variables. Here, the authors demonstrate that generic neural networks can be trained using a simple error-based learning rule to perform such probabilistic computations efficiently without any need for task specific operations.

Security of Distributed-Phase-Reference Quantum Key Distribution

NASA Astrophysics Data System (ADS)

Moroder, Tobias; Curty, Marcos; Lim, Charles Ci Wen; Thinh, Le Phuc; Zbinden, Hugo; Gisin, Nicolas

2012-12-01

Distributed-phase-reference quantum key distribution stands out for its easy implementation with present day technology. For many years, a full security proof of these schemes in a realistic setting has been elusive. We solve this long-standing problem and present a generic method to prove the security of such protocols against general attacks. To illustrate our result, we provide lower bounds on the key generation rate of a variant of the coherent-one-way quantum key distribution protocol. In contrast to standard predictions, it appears to scale quadratically with the system transmittance.

Generic Data Pipelining Using ORAC-DR

NASA Astrophysics Data System (ADS)

Allan, Alasdair; Jenness, Tim; Economou, Frossie; Currie, Malcolm J.; Bly, Martin J.

A generic data reduction pipeline is, perhaps, the holy grail for data reduction software. We present work which sets us firmly on the path towards this goal. ORAC-DR is an online data reduction pipeline written by the Joint Astronomy Center (JAC) and the UK Astronomy Technology Center (ATC) and distributed as part of the Starlink Software collection (SSC). It is intended to run with a minimum of observer interaction, and is able to handle data from many different instruments, including SCUBA, CGS4, UFTI, IRCAM and Michelle, with support for IRIS2 and UIST under development. Recent work by Starlink in collaboration with the JAC has resulted in an increase in the pipeline's flexibility, opening up the possibility that it could be used for truly generic data reduction for data from any imaging, and eventually spectroscopic, detector.

Coupling a distributed hydrological model with detailed forest structural information for large-scale global change impact assessment

NASA Astrophysics Data System (ADS)

Eisner, Stephanie; Huang, Shaochun; Majasalmi, Titta; Bright, Ryan; Astrup, Rasmus; Beldring, Stein

2017-04-01

Forests are recognized for their decisive effect on landscape water balance with structural forest characteristics as stand density or species composition determining energy partitioning and dominant flow paths. However, spatial and temporal variability in forest structure is often poorly represented in hydrological modeling frameworks, in particular in regional to large scale hydrological modeling and impact analysis. As a common practice, prescribed land cover classes (including different generic forest types) are linked to parameter values derived from literature, or parameters are determined by calibration. While national forest inventory (NFI) data provide comprehensive, detailed information on hydrologically relevant forest characteristics, their potential to inform hydrological simulation over larger spatial domains is rarely exploited. In this study we present a modeling framework that couples the distributed hydrological model HBV with forest structural information derived from the Norwegian NFI and multi-source remote sensing data. The modeling framework, set up for the entire of continental Norway at 1 km spatial resolution, is explicitly designed to study the combined and isolated impacts of climate change, forest management and land use change on hydrological fluxes. We use a forest classification system based on forest structure rather than biomes which allows to implicitly account for impacts of forest management on forest structural attributes. In the hydrological model, different forest classes are represented by three parameters: leaf area index (LAI), mean tree height and surface albedo. Seasonal cycles of LAI and surface albedo are dynamically simulated to make the framework applicable under climate change conditions. Based on a hindcast for the pilot regions Nord-Trøndelag and Sør-Trøndelag, we show how forest management has affected regional hydrological fluxes during the second half of the 20th century as contrasted to climate variability.

Numerical relativity waveform surrogate model for generically precessing binary black hole mergers

NASA Astrophysics Data System (ADS)

Blackman, Jonathan; Field, Scott E.; Scheel, Mark A.; Galley, Chad R.; Ott, Christian D.; Boyle, Michael; Kidder, Lawrence E.; Pfeiffer, Harald P.; Szilágyi, Béla

2017-07-01

A generic, noneccentric binary black hole (BBH) system emits gravitational waves (GWs) that are completely described by seven intrinsic parameters: the black hole spin vectors and the ratio of their masses. Simulating a BBH coalescence by solving Einstein's equations numerically is computationally expensive, requiring days to months of computing resources for a single set of parameter values. Since theoretical predictions of the GWs are often needed for many different source parameters, a fast and accurate model is essential. We present the first surrogate model for GWs from the coalescence of BBHs including all seven dimensions of the intrinsic noneccentric parameter space. The surrogate model, which we call NRSur7dq2, is built from the results of 744 numerical relativity simulations. NRSur7dq2 covers spin magnitudes up to 0.8 and mass ratios up to 2, includes all ℓ≤4 modes, begins about 20 orbits before merger, and can be evaluated in ˜50 ms . We find the largest NRSur7dq2 errors to be comparable to the largest errors in the numerical relativity simulations, and more than an order of magnitude smaller than the errors of other waveform models. Our model, and more broadly the methods developed here, will enable studies that were not previously possible when using highly accurate waveforms, such as parameter inference and tests of general relativity with GW observations.

Generic reclassification and species boundaries in the rediscovered freshwater mussel ‘Quadrula’ mitchelli (Simpson in Dall, 1896)

USGS Publications Warehouse

Pfeiffer, John M.; Johnson, Nathan A.; Randklev, Charles R.; Howells, Robert G.; Williams, James D.

2016-01-01

The Central Texas endemic freshwater mussel, Quadrula mitchelli (Simpson in Dall, 1896), had been presumed extinct until relict populations were recently rediscovered. To help guide ongoing and future conservation efforts focused on Q. mitchelli we set out to resolve several uncertainties regarding its evolutionary history, specifically its unknown generic position and untested species boundaries. We designed a molecular matrix consisting of two loci (cytochrome c oxidase subunit I and internal transcribed spacer I) and 57 terminal taxa to test the generic position of Q. mitchelli using Bayesian inference and maximum likelihood phylogenetic reconstruction. We also employed two Bayesian species validation methods to test five a priori species models (i.e. hypotheses of species delimitation). Our study is the first to test the generic position of Q.mitchelli and we found robust support for its inclusion in the genusFusconaia. Accordingly, we introduce the binomial, Fusconaia mitchelli comb. nov., to accurately represent the systematic position of the species. We resolved F. mitchelli individuals in two well supported and divergent clades that were generally distinguished as distinct species using Bayesian species validation methods, although alternative hypotheses of species delineation were also supported. Despite strong evidence of genetic isolation within F. mitchelli, we do not advocate for species-level status of the two clades as they are allopatrically distributed and no morphological, behavioral, or ecological characters are known to distinguish them. These results are discussed in the context of the systematics, distribution, and conservation ofF. mitchelli.

Comparison of bioavailability between the most available generic tablet formulation containing artemether and lumefantrine on the Tanzanian market and the innovator's product.

PubMed

Minzi, Omary M S; Marealle, Ignace A; Shekalaghe, Seif; Juma, Omar; Ngaimisi, Eliford; Chemba, Mwajuma; Rutaihwa, Mastidia; Abdulla, Salim; Sasi, Philip

2013-05-30

Existence of anti-malarial generic drugs with low bioavailability marketed on sub-Saharan Africa raises a concern on patients achieving therapeutic concentrations after intake of such products. This work compared bioavailability of one generic tablet formulation with innovator's product. Both were fixed dose combination tablet formulations containing artemether and lumefantrine. The study was conducted in Dar Es Salaam, Tanzania, in which a survey of the most abundant generic containing artemether-lumefantrine tablet formulation was carried out in retail pharmacies. The most widely available generic (Artefan®, Ajanta Pharma Ltd, Maharashtra, India) was sampled for bioavailability comparison with Coartem® (Novartis Pharma, Basel, Switzerland)--the innovator's product. A randomized, two-treatment cross-over study was conducted in 18 healthy Tanzanian black male volunteers. Each volunteer received Artefan® (test) and Coartem® (as reference) formulation separated by 42 days of drug-free washout period. Serial blood samples were collected up to 168 hours after oral administration of a single dose of each treatment. Quantitation of lumefantrine plasma levels was done using HPLC with UV detection. Bioequivalence of the two products was assessed in accordance with the US Food and Drug Authority (FDA) guidelines. The most widely available generic in pharmacies was Artefan® from India. All eighteen enrolled volunteers completed the study and both test and reference tablet formulations were well tolerated. It was possible to quantify lumefantrine alone, therefore, the pharmacokinetic parameters reported herein are for lumefantrine. The geometric mean ratios for Cmax, AUC0-t and AUC0-∞ were 84% in all cases and within FDA recommended bioequivalence limits of 80%-125%, but the 90% confidence intervals were outside FDA recommended limits (CI 49-143%, 53-137%, 52-135% respectively). There were no statistical significant differences between the two formulations with regard to PK parameters (P > 0.05). Although the ratios of AUCs and Cmax were within the acceptable FDA range, bioequivalence between Artefan® and Coartem® tablet formulations was not demonstrated due to failure to comply with the FDA 90% confidence interval criteria. Based on the observed total drug exposure (AUCs), Artefan® is likely to produce a similar therapeutic response as Coartem®.

Is switching from brand name to generic formulations of phenobarbital associated with loss of antiepileptic efficacy?: a pharmacokinetic study with two oral formulations (Luminal(®) vet, Phenoleptil(®)) in dogs.

PubMed

Bankstahl, Marion; Bankstahl, Jens P; Löscher, Wolfgang

2013-10-09

In human medicine, adverse outcomes associated with switching between bioequivalent brand name and generic antiepileptic drug products is a subject of concern among clinicians. In veterinary medicine, epilepsy in dogs is usually treated with phenobarbital, either with the standard brand name formulation Luminal(®) or the veterinary products Luminal(®) vet and the generic formulation Phenoleptil(®). Luminal(®) and Luminal(®) vet are identical 100 mg tablet formulations, while Phenoleptil(®) is available in the form of 12.5 and 50 mg tablets. Following approval of Phenoleptil(®) for treatment of canine epilepsy, it was repeatedly reported by clinicians and dog owners that switching from Luminal(®) (human tablets) to Phenoleptil(®) in epileptic dogs, which were controlled by treatment with Luminal(®), induced recurrence of seizures. In the present study, we compared bioavailability of phenobarbital after single dose administration of Luminal(®) vet vs. Phenoleptil(®) with a crossover design in 8 healthy Beagle dogs. Both drugs were administered at a dose of 100 mg/dog, resulting in 8 mg/kg phenobarbital on average. Peak plasma concentrations (Cmax) following Luminal(®) vet vs. Phenoleptil(®) were about the same in most dogs (10.9 ± 0.92 vs. 10.5 ± 0.77 μg/ml), and only one dog showed noticeable lower concentrations after Phenoleptil(®) vs. Luminal(®) vet. Elimination half-life was about 50 h (50.3 ± 3.1 vs. 52.9 ± 2.8 h) without differences between the formulations. The relative bioavailability of the two products (Phenoleptil(®) vs. Luminal(®) vet.) was 0.98 ± 0.031, indicating that both formulations resulted in about the same bioavailability. Overall, the two formulations did not differ significantly with respect to pharmacokinetic parameters when mean group parameters were compared. Thus, the reasons for the anecdotal reports, if true, that switching from the brand to the generic formulation of phenobarbital may lead to recurrence of seizures are obviously not related to a generally lower bioavailability of the generic formulation, although single dogs may exhibit lower plasma levels after the generic formulation that could be clinically meaningful.

Is switching from brand name to generic formulations of phenobarbital associated with loss of antiepileptic efficacy?: a pharmacokinetic study with two oral formulations (Luminal® vet, Phenoleptil®) in dogs

PubMed Central

2013-01-01

Background In human medicine, adverse outcomes associated with switching between bioequivalent brand name and generic antiepileptic drug products is a subject of concern among clinicians. In veterinary medicine, epilepsy in dogs is usually treated with phenobarbital, either with the standard brand name formulation Luminal® or the veterinary products Luminal® vet and the generic formulation Phenoleptil®. Luminal® and Luminal® vet are identical 100 mg tablet formulations, while Phenoleptil® is available in the form of 12.5 and 50 mg tablets. Following approval of Phenoleptil® for treatment of canine epilepsy, it was repeatedly reported by clinicians and dog owners that switching from Luminal® (human tablets) to Phenoleptil® in epileptic dogs, which were controlled by treatment with Luminal®, induced recurrence of seizures. In the present study, we compared bioavailability of phenobarbital after single dose administration of Luminal® vet vs. Phenoleptil® with a crossover design in 8 healthy Beagle dogs. Both drugs were administered at a dose of 100 mg/dog, resulting in 8 mg/kg phenobarbital on average. Results Peak plasma concentrations (Cmax) following Luminal® vet vs. Phenoleptil® were about the same in most dogs (10.9 ± 0.92 vs. 10.5 ± 0.77 μg/ml), and only one dog showed noticeable lower concentrations after Phenoleptil® vs. Luminal® vet. Elimination half-life was about 50 h (50.3 ± 3.1 vs. 52.9 ± 2.8 h) without differences between the formulations. The relative bioavailability of the two products (Phenoleptil® vs. Luminal® vet.) was 0.98 ± 0.031, indicating that both formulations resulted in about the same bioavailability. Conclusions Overall, the two formulations did not differ significantly with respect to pharmacokinetic parameters when mean group parameters were compared. Thus, the reasons for the anecdotal reports, if true, that switching from the brand to the generic formulation of phenobarbital may lead to recurrence of seizures are obviously not related to a generally lower bioavailability of the generic formulation, although single dogs may exhibit lower plasma levels after the generic formulation that could be clinically meaningful. PMID:24107313

Pharmaceutical expenditure forecast model to support health policy decision making.

PubMed

Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

With constant incentives for healthcare payers to contain their pharmaceutical budgets, modelling policy decision impact became critical. The objective of this project was to test the impact of various policy decisions on pharmaceutical budget (developed for the European Commission for the project 'European Union (EU) Pharmaceutical expenditure forecast' - http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). A model was built to assess policy scenarios' impact on the pharmaceutical budgets of seven member states of the EU, namely France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. The following scenarios were tested: expanding the UK policies to EU, changing time to market access, modifying generic price and penetration, shifting the distribution chain of biosimilars (retail/hospital). Applying the UK policy resulted in dramatic savings for Germany (10 times the base case forecast) and substantial additional savings for France and Portugal (2 and 4 times the base case forecast, respectively). Delaying time to market was found be to a very powerful tool to reduce pharmaceutical expenditure. Applying the EU transparency directive (6-month process for pricing and reimbursement) increased pharmaceutical expenditure for all countries (from 1.1 to 4 times the base case forecast), except in Germany (additional savings). Decreasing the price of generics and boosting the penetration rate, as well as shifting distribution of biosimilars through hospital chain were also key methods to reduce pharmaceutical expenditure. Change in the level of reimbursement rate to 100% in all countries led to an important increase in the pharmaceutical budget. Forecasting pharmaceutical expenditure is a critical exercise to inform policy decision makers. The most important leverages identified by the model on pharmaceutical budget were driven by generic and biosimilar prices, penetration rate, and distribution. Reducing, even slightly, the prices of generics had a major impact on savings. However, very aggressive pricing of generic and biosimilar products might make this market unattractive and can be counterproductive. Worth noting, delaying time to access innovative products was also identified as an effective leverage to increase savings but might not be a desirable policy for breakthrough products. Increasing patient financial contributions, either directly or indirectly via their private insurances, is a more likely scenario rather than expanding the national pharmaceutical expenditure coverage.

Pharmaceutical expenditure forecast model to support health policy decision making

PubMed Central

Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

Background and objective With constant incentives for healthcare payers to contain their pharmaceutical budgets, modelling policy decision impact became critical. The objective of this project was to test the impact of various policy decisions on pharmaceutical budget (developed for the European Commission for the project ‘European Union (EU) Pharmaceutical expenditure forecast’ – http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). Methods A model was built to assess policy scenarios’ impact on the pharmaceutical budgets of seven member states of the EU, namely France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. The following scenarios were tested: expanding the UK policies to EU, changing time to market access, modifying generic price and penetration, shifting the distribution chain of biosimilars (retail/hospital). Results Applying the UK policy resulted in dramatic savings for Germany (10 times the base case forecast) and substantial additional savings for France and Portugal (2 and 4 times the base case forecast, respectively). Delaying time to market was found be to a very powerful tool to reduce pharmaceutical expenditure. Applying the EU transparency directive (6-month process for pricing and reimbursement) increased pharmaceutical expenditure for all countries (from 1.1 to 4 times the base case forecast), except in Germany (additional savings). Decreasing the price of generics and boosting the penetration rate, as well as shifting distribution of biosimilars through hospital chain were also key methods to reduce pharmaceutical expenditure. Change in the level of reimbursement rate to 100% in all countries led to an important increase in the pharmaceutical budget. Conclusions Forecasting pharmaceutical expenditure is a critical exercise to inform policy decision makers. The most important leverages identified by the model on pharmaceutical budget were driven by generic and biosimilar prices, penetration rate, and distribution. Reducing, even slightly, the prices of generics had a major impact on savings. However, very aggressive pricing of generic and biosimilar products might make this market unattractive and can be counterproductive. Worth noting, delaying time to access innovative products was also identified as an effective leverage to increase savings but might not be a desirable policy for breakthrough products. Increasing patient financial contributions, either directly or indirectly via their private insurances, is a more likely scenario rather than expanding the national pharmaceutical expenditure coverage. PMID:27226830

Assessment of knowledge and perceptions toward generic medicines among basic science undergraduate medical students at Aruba.

PubMed

Shankar, P Ravi; Herz, Burton L; Dubey, Arun K; Hassali, Mohamed A

2016-10-01

Use of generic medicines is important to reduce rising health-care costs. Proper knowledge and perception of medical students and doctors toward generic medicines are important. Xavier University School of Medicine in Aruba admits students from the United States, Canada, and other countries to the undergraduate medical (MD) program. The present study was conducted to study the knowledge and perception about generic medicines among basic science MD students. The cross-sectional study was conducted among first to fifth semester students during February 2015. A previously developed instrument was used. Basic demographic information was collected. Respondent's agreement with a set of statements was noted using a Likert-type scale. The calculated total score was compared among subgroups of respondents. One sample Kolmogorov-Smirnov test was used to study the normality of distribution, Independent samples t -test to compare the total score for dichotomous variables, and analysis of variance for others were used for statistical analysis. Fifty-six of the 85 students (65.8%) participated. Around 55% of respondents were between 20 and 25 years of age and of American nationality. Only three respondents (5.3%) provided the correct value of the regulatory bioequivalence limits. The mean total score was 43.41 (maximum 60). There was no significant difference in scores among subgroups. There was a significant knowledge gap with regard to the regulatory bioequivalence limits for generic medicines. Respondents' level of knowledge about other aspects of generic medicines was good but could be improved. Studies among clinical students in the institution and in other Caribbean medical schools are required. Deficiencies were noted and we have strengthened learning about generic medicines during the basic science years.

A hybrid approach to advancing quantitative prediction of tissue distribution of basic drugs in human

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poulin, Patrick, E-mail: patrick-poulin@videotron.ca; Ekins, Sean; Department of Pharmaceutical Sciences, School of Pharmacy, University of Maryland, 20 Penn Street, Baltimore, MD 21201

A general toxicity of basic drugs is related to phospholipidosis in tissues. Therefore, it is essential to predict the tissue distribution of basic drugs to facilitate an initial estimate of that toxicity. The objective of the present study was to further assess the original prediction method that consisted of using the binding to red blood cells measured in vitro for the unbound drug (RBCu) as a surrogate for tissue distribution, by correlating it to unbound tissue:plasma partition coefficients (Kpu) of several tissues, and finally to predict volume of distribution at steady-state (V{sub ss}) in humans under in vivo conditions. Thismore » correlation method demonstrated inaccurate predictions of V{sub ss} for particular basic drugs that did not follow the original correlation principle. Therefore, the novelty of this study is to provide clarity on the actual hypotheses to identify i) the impact of pharmacological mode of action on the generic correlation of RBCu-Kpu, ii) additional mechanisms of tissue distribution for the outlier drugs, iii) molecular features and properties that differentiate compounds as outliers in the original correlation analysis in order to facilitate its applicability domain alongside the properties already used so far, and finally iv) to present a novel and refined correlation method that is superior to what has been previously published for the prediction of human V{sub ss} of basic drugs. Applying a refined correlation method after identifying outliers would facilitate the prediction of more accurate distribution parameters as key inputs used in physiologically based pharmacokinetic (PBPK) and phospholipidosis models.« less

A simple model of bipartite cooperation for ecological and organizational networks.

PubMed

Saavedra, Serguei; Reed-Tsochas, Felix; Uzzi, Brian

2009-01-22

In theoretical ecology, simple stochastic models that satisfy two basic conditions about the distribution of niche values and feeding ranges have proved successful in reproducing the overall structural properties of real food webs, using species richness and connectance as the only input parameters. Recently, more detailed models have incorporated higher levels of constraint in order to reproduce the actual links observed in real food webs. Here, building on previous stochastic models of consumer-resource interactions between species, we propose a highly parsimonious model that can reproduce the overall bipartite structure of cooperative partner-partner interactions, as exemplified by plant-animal mutualistic networks. Our stochastic model of bipartite cooperation uses simple specialization and interaction rules, and only requires three empirical input parameters. We test the bipartite cooperation model on ten large pollination data sets that have been compiled in the literature, and find that it successfully replicates the degree distribution, nestedness and modularity of the empirical networks. These properties are regarded as key to understanding cooperation in mutualistic networks. We also apply our model to an extensive data set of two classes of company engaged in joint production in the garment industry. Using the same metrics, we find that the network of manufacturer-contractor interactions exhibits similar structural patterns to plant-animal pollination networks. This surprising correspondence between ecological and organizational networks suggests that the simple rules of cooperation that generate bipartite networks may be generic, and could prove relevant in many different domains, ranging from biological systems to human society.

Geomechanical Anisotropy and Rock Fabric in Shales

NASA Astrophysics Data System (ADS)

Huffman, K. A.; Connolly, P.; Thornton, D. A.

2017-12-01

Digital rock physics (DRP) is an emerging area of qualitative and quantitative scientific analysis that has been employed on a variety of rock types at various scales to characterize petrophysical, mechanical, and hydraulic rock properties. This contribution presents a generic geomechanically focused DRP workflow involving image segmentation by geomechanical constituents, generation of finite element (FE) meshes, and application of various boundary conditions (i.e. at the edge of the domain and at boundaries of various components such as edges of individual grains). The generic workflow enables use of constituent geological objects and relationships in a computational based approach to address specific questions in a variety of rock types at various scales. Two examples are 1) modeling stress dependent permeability, where it occurs and why it occurs at the grain scale; 2) simulating the path and complexity of primary fractures and matrix damage in materials with minerals or intervals of different mechanical behavior. Geomechanical properties and fabric characterization obtained from 100 micron shale SEM images using the generic DRP workflow are presented. Image segmentation and development of FE simulation composed of relatively simple components (elastic materials, frictional contacts) and boundary conditions enable the determination of bulk static elastic properties. The procedure is repeated for co-located images at pertinent orientations to determine mechanical anisotropy. The static moduli obtained are benchmarked against lab derived measurements since material properties (esp. frictional ones) are poorly constrained at the scale of investigation. Once confidence in the input material parameters is gained, the procedure can be used to characterize more samples (i.e. images) than is possible from rock samples alone. Integration of static elastic properties with grain statistics and geologic (facies) conceptual models derived from core and geophysical logs enables quantification of the impact that variations in rock fabric and grain interactions have on bulk mechanical rock behavior. When considered in terms of the stratigraphic framework of two different shale reservoirs it is found that silica distribution, clay content and orientation play a first order role in mechanical anisotropy.

Examining Food Risk in the Large using a Complex, Networked System-of-sytems Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ambrosiano, John; Newkirk, Ryan; Mc Donald, Mark P

2010-12-03

The food production infrastructure is a highly complex system of systems. Characterizing the risks of intentional contamination in multi-ingredient manufactured foods is extremely challenging because the risks depend on the vulnerabilities of food processing facilities and on the intricacies of the supply-distribution networks that link them. A pure engineering approach to modeling the system is impractical because of the overall system complexity and paucity of data. A methodology is needed to assess food contamination risk 'in the large', based on current, high-level information about manufacturing facilities, corrunodities and markets, that will indicate which food categories are most at risk ofmore » intentional contamination and warrant deeper analysis. The approach begins by decomposing the system for producing a multi-ingredient food into instances of two subsystem archetypes: (1) the relevant manufacturing and processing facilities, and (2) the networked corrunodity flows that link them to each other and consumers. Ingredient manufacturing subsystems are modeled as generic systems dynamics models with distributions of key parameters that span the configurations of real facilities. Networks representing the distribution systems are synthesized from general information about food corrunodities. This is done in a series of steps. First, probability networks representing the aggregated flows of food from manufacturers to wholesalers, retailers, other manufacturers, and direct consumers are inferred from high-level approximate information. This is followed by disaggregation of the general flows into flows connecting 'large' and 'small' categories of manufacturers, wholesalers, retailers, and consumers. Optimization methods are then used to determine the most likely network flows consistent with given data. Vulnerability can be assessed for a potential contamination point using a modified CARVER + Shock model. Once the facility and corrunodity flow models are instantiated, a risk consequence analysis can be performed by injecting contaminant at chosen points in the system and propagating the event through the overarching system to arrive at morbidity and mortality figures. A generic chocolate snack cake model, consisting of fluid milk, liquid eggs, and cocoa, is described as an intended proof of concept for multi-ingredient food systems. We aim for an eventual tool that can be used directly by policy makers and planners.« less

Novel methodology for pharmaceutical expenditure forecast

PubMed Central

Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

Background and objective The value appreciation of new drugs across countries today features a disruption that is making the historical data that are used for forecasting pharmaceutical expenditure poorly reliable. Forecasting methods rarely addressed uncertainty. The objective of this project was to propose a methodology to perform pharmaceutical expenditure forecasting that integrates expected policy changes and uncertainty (developed for the European Commission as the ‘EU Pharmaceutical expenditure forecast’; see http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). Methods 1) Identification of all pharmaceuticals going off-patent and new branded medicinal products over a 5-year forecasting period in seven European Union (EU) Member States. 2) Development of a model to estimate direct and indirect impacts (based on health policies and clinical experts) on savings of generics and biosimilars. Inputs were originator sales value, patent expiry date, time to launch after marketing authorization, price discount, penetration rate, time to peak sales, and impact on brand price. 3) Development of a model for new drugs, which estimated sales progression in a competitive environment. Clinical expected benefits as well as commercial potential were assessed for each product by clinical experts. Inputs were development phase, marketing authorization dates, orphan condition, market size, and competitors. 4) Separate analysis of the budget impact of products going off-patent and new drugs according to several perspectives, distribution chains, and outcomes. 5) Addressing uncertainty surrounding estimations via deterministic and probabilistic sensitivity analysis. Results This methodology has proven to be effective by 1) identifying the main parameters impacting the variations in pharmaceutical expenditure forecasting across countries: generics discounts and penetration, brand price after patent loss, reimbursement rate, the penetration of biosimilars and discount price, distribution chains, and the time to reach peak sales for new drugs; 2) estimating the statistical distribution of the budget impact; and 3) testing different pricing and reimbursement policy decisions on health expenditures. Conclusions This methodology was independent of historical data and appeared to be highly flexible and adapted to test robustness and provide probabilistic analysis to support policy decision making. PMID:27226843

Automatic facial animation parameters extraction in MPEG-4 visual communication

NASA Astrophysics Data System (ADS)

Yang, Chenggen; Gong, Wanwei; Yu, Lu

2002-01-01

Facial Animation Parameters (FAPs) are defined in MPEG-4 to animate a facial object. The algorithm proposed in this paper to extract these FAPs is applied to very low bit-rate video communication, in which the scene is composed of a head-and-shoulder object with complex background. This paper addresses the algorithm to automatically extract all FAPs needed to animate a generic facial model, estimate the 3D motion of head by points. The proposed algorithm extracts human facial region by color segmentation and intra-frame and inter-frame edge detection. Facial structure and edge distribution of facial feature such as vertical and horizontal gradient histograms are used to locate the facial feature region. Parabola and circle deformable templates are employed to fit facial feature and extract a part of FAPs. A special data structure is proposed to describe deformable templates to reduce time consumption for computing energy functions. Another part of FAPs, 3D rigid head motion vectors, are estimated by corresponding-points method. A 3D head wire-frame model provides facial semantic information for selection of proper corresponding points, which helps to increase accuracy of 3D rigid object motion estimation.

Generic isolated horizons in loop quantum gravity

NASA Astrophysics Data System (ADS)

Beetle, Christopher; Engle, Jonathan

2010-12-01

Isolated horizons model equilibrium states of classical black holes. A detailed quantization, starting from a classical phase space restricted to spherically symmetric horizons, exists in the literature and has since been extended to axisymmetry. This paper extends the quantum theory to horizons of arbitrary shape. Surprisingly, the Hilbert space obtained by quantizing the full phase space of all generic horizons with a fixed area is identical to that originally found in spherical symmetry. The entropy of a large horizon remains one-quarter its area, with the Barbero-Immirzi parameter retaining its value from symmetric analyses. These results suggest a reinterpretation of the intrinsic quantum geometry of the horizon surface.

@neurIST - chronic disease management through integration of heterogeneous data and computer-interpretable guideline services.

PubMed

Dunlop, R; Arbona, A; Rajasekaran, H; Lo Iacono, L; Fingberg, J; Summers, P; Benkner, S; Engelbrecht, G; Chiarini, A; Friedrich, C M; Moore, B; Bijlenga, P; Iavindrasana, J; Hose, R D; Frangi, A F

2008-01-01

This paper presents an overview of computerised decision support for clinical practice. The concept of computer-interpretable guidelines is introduced in the context of the @neurIST project, which aims at supporting the research and treatment of asymptomatic unruptured cerebral aneurysms by bringing together heterogeneous data, computing and complex processing services. The architecture is generic enough to adapt it to the treatment of other diseases beyond cerebral aneurysms. The paper reviews the generic requirements of the @neurIST system and presents the innovative work in distributing executable clinical guidelines.

Generic synopsis of the jumping plant-lice (Hemiptera: Sternorrhyncha: Psylloidea) from Colombia.

PubMed

Rendón-Mera, Diana Isabel; Serna, Francisco; Burckhardt, Daniel

2017-11-20

Jumping plant-lice (Hemiptera: Sternorrhyncha: Psylloidea) are a group of phloem-feeding insects with nearly 4000        described species. Previous records from Colombia comprise 19 genera of all eight known families. The revision of material deposited in six Colombian and three foreign museums yielded another nine genera that constitute new country records. Material from 16 departments was examined. Each genus is diagnosed and information is provided on biology, damage and host-plants. Local distribution maps and a generic key for the identification of adults are provided.

Comparison of Aquitaine and Rioja Red Wines: Characterization of Their Phenolic Composition and Evolution from 2000 to 2013.

PubMed

Quaglieri, Cindy; Prieto-Perea, Noelia; Berrueta, Luis Angel; Gallo, Blanca; Rasines-Perea, Zurine; Jourdes, Michael; Teissedre, Pierre-Louis

2017-01-24

Wine chemical analysis was carried out on 194 commercial blended red wines produced by two major wine-growing areas-the Aquitaine (France) and Rioja (Spain) regions-in order to compare the wines of both regions. Anthocyanins and derived pigments, tannins and derivatives were identified and quantified by HPLC-DAD-ESI-MS/MS (high pressure liquid chromatography coupled to diode array detector and mass spectrometry using the electrospray ionization interface). Mean degree of polymerization (mDP) was determined. The influence of the wine-growing region and the predominance of the properties of some grape varieties used are confirmed by the significant differences observed between both regions. Rioja and Bordeaux "generic" (Bordeaux and Bordeaux-Supérieur appellations) red wines showed the highest anthocyanic content and the highest mDP, as these wines are in a majority made from Merlot (Bordeaux "generic") and Tempranillo (Rioja). On the contrary, Bordeaux "specific" regions (Blayais, Médoc, Graves, and Libournais) showed the red wines with the highest total phenolic content and tannin concentration, as the predominant grape variety used is Cabernet Sauvignon. A principal component analysis (PCA) and a hierarchical ascendant classification (HAC) suggesting patterns between the chemical parameters and the distribution of the red wines in three groups were proposed. The comparison of the two wine-growing areas also reveals some similarities between the various grape varieties used. A general effect of a progressive decrease in anthocyanins, anthocyanin-derived pigment and tannins is observed for older wines.

Decentralized and self-centered estimation architecture for formation flying of spacecraft

NASA Technical Reports Server (NTRS)

Kang, B. H.; Hadaegh, F. Y.; Scharf, D. P.; Ke, N. -P.

2001-01-01

Formation estimation methodologies for distributed spacecraft systems are formulated and analyzed. A generic form of the formation estimation problem is described by defining a common hardware configuration, observation graph, and feasible estimation topologies.

Factorial invariance of child self-report across healthy and chronic health condition groups: a confirmatory factor analysis utilizing the PedsQLTM 4.0 Generic Core Scales.

PubMed

Limbers, Christine A; Newman, Daniel A; Varni, James W

2008-07-01

The objective of the present study was to examine the factorial invariance of the PedsQL 4.0 Generic Core Scales for child self-report across 11,433 children ages 5-18 with chronic health conditions and healthy children. Multigroup Confirmatory Factor Analysis was performed specifying a five-factor model. Two multigroup structural equation models, one with constrained parameters and the other with unconstrained parameters, were proposed in order to compare the factor loadings across children with chronic health conditions and healthy children. Metric invariance (i.e., equal factor loadings) was demonstrated based on stability of the Comparative Fit Index (CFI) between the two models, and several additional indices of practical fit including the root mean squared error of approximation, the Non-normed Fit Index, and the Parsimony Normed Fit Index. The findings support an equivalent five-factor structure on the PedsQL 4.0 Generic Core Scales across healthy and chronic health condition groups. These findings suggest that when differences are found across chronic health condition and healthy groups when utilizing the PedsQL, these differences are more likely real differences in self-perceived health-related quality of life, rather than differences in interpretation of the PedsQL items as a function of health status.

Telerobotic system performance measurement - Motivation and methods

NASA Technical Reports Server (NTRS)

Kondraske, George V.; Khoury, George J.

1992-01-01

A systems performance-based strategy for modeling and conducting experiments relevant to the design and performance characterization of telerobotic systems is described. A developmental testbed consisting of a distributed telerobotics network and initial efforts to implement the strategy described is presented. Consideration is given to the general systems performance theory (GSPT) to tackle human performance problems as a basis for: measurement of overall telerobotic system (TRS) performance; task decomposition; development of a generic TRS model; and the characterization of performance of subsystems comprising the generic model. GSPT employs a resource construct to model performance and resource economic principles to govern the interface of systems to tasks. It provides a comprehensive modeling/measurement strategy applicable to complex systems including both human and artificial components. Application is presented within the framework of a distributed telerobotics network as a testbed. Insight into the design of test protocols which elicit application-independent data is described.

SU-E-T-109: An Investigation of Including Variable Relative Biological Effectiveness in Intensity Modulated Proton Therapy Planning Optimization for Head and Neck Cancer Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cao, W; Zaghian, M; Lim, G

2015-06-15

Purpose: The current practice of considering the relative biological effectiveness (RBE) of protons in intensity modulated proton therapy (IMPT) planning is to use a generic RBE value of 1.1. However, RBE is indeed a variable depending on the dose per fraction, the linear energy transfer, tissue parameters, etc. In this study, we investigate the impact of using variable RBE based optimization (vRBE-OPT) on IMPT dose distributions compared by conventional fixed RBE based optimization (fRBE-OPT). Methods: Proton plans of three head and neck cancer patients were included for our study. In order to calculate variable RBE, tissue specific parameters were obtainedmore » from the literature and dose averaged LET values were calculated by Monte Carlo simulations. Biological effects were calculated using the linear quadratic model and they were utilized in the variable RBE based optimization. We used a Polak-Ribiere conjugate gradient algorithm to solve the model. In fixed RBE based optimization, we used conventional physical dose optimization to optimize doses weighted by 1.1. IMPT plans for each patient were optimized by both methods (vRBE-OPT and fRBE-OPT). Both variable and fixed RBE weighted dose distributions were calculated for both methods and compared by dosimetric measures. Results: The variable RBE weighted dose distributions were more homogenous within the targets, compared with the fixed RBE weighted dose distributions for the plans created by vRBE-OPT. We observed that there were noticeable deviations between variable and fixed RBE weighted dose distributions if the plan were optimized by fRBE-OPT. For organs at risk sparing, dose distributions from both methods were comparable. Conclusion: Biological dose based optimization rather than conventional physical dose based optimization in IMPT planning may bring benefit in improved tumor control when evaluating biologically equivalent dose, without sacrificing OAR sparing, for head and neck cancer patients. The research is supported in part by National Institutes of Health Grant No. 2U19CA021239-35.« less

Nondeterministic data base for computerized visual perception

NASA Technical Reports Server (NTRS)

Yakimovsky, Y.

1976-01-01

A description is given of the knowledge representation data base in the perception subsystem of the Mars robot vehicle prototype. Two types of information are stored. The first is generic information that represents general rules that are conformed to by structures in the expected environments. The second kind of information is a specific description of a structure, i.e., the properties and relations of objects in the specific case being analyzed. The generic knowledge is represented so that it can be applied to extract and infer the description of specific structures. The generic model of the rules is substantially a Bayesian representation of the statistics of the environment, which means it is geared to representation of nondeterministic rules relating properties of, and relations between, objects. The description of a specific structure is also nondeterministic in the sense that all properties and relations may take a range of values with an associated probability distribution.

Assessing cadmium exposure risks of vegetables with plant uptake factor and soil property.

PubMed

Yang, Yang; Chang, Andrew C; Wang, Meie; Chen, Weiping; Peng, Chi

2018-07-01

Plant uptake factors (PUFs) are of great importance in human cadmium (Cd) exposure risk assessment while it has been often treated in a generic way. We collected 1077 pairs of vegetable-soil samples from production fields to characterize Cd PUFs and demonstrated their utility in assessing Cd exposure risks to consumers of locally grown vegetables. The Cd PUFs varied with plant species and pH and organic matter content of soils. Once normalized PUFs against soil parameters, the PUFs distributions were log-normal in nature. In this manner, the PUFs were represented by definable probability distributions instead of a deterministic figure. The Cd exposure risks were then assessed using the normalized PUF based on the Monte Carlo simulation algorithm. Factors affecting the extent of Cd exposures were isolated through sensitivity analyses. Normalized PUF would illustrate the outcomes for uncontaminated and slightly contaminated soils. Among the vegetables, lettuce was potentially hazardous for residents due to its high Cd accumulation but low Zn concentration. To protect 95% of the lettuce production from causing excessive Cd exposure risks, pH of soils needed to be 5.9 and above. Copyright © 2018 Elsevier Ltd. All rights reserved.

Sustainable development induction in organizations: a convergence analysis of ISO standards management tools' parameters.

PubMed

Merlin, Fabrício Kurman; Pereira, Vera Lúciaduarte do Valle; Pacheco, Waldemar

2012-01-01

Organizations are part of an environment in which they are pressured to meet society's demands and acting in a sustainable way. In an attempt to meet such demands, organizations make use of various management tools, among which, ISO standards are used. Although there are evidences of contributions provided by these standards, it is questionable whether its parameters converge for a possible induction for sustainable development in organizations. This work presents a theoretical study, designed on structuralism world view, descriptive and deductive method, which aims to analyze the convergence of management tools' parameters in ISO standards. In order to support the analysis, a generic framework for possible convergence was developed, based on systems approach, linking five ISO standards (ISO 9001, ISO 14001, OHSAS 18001, ISO 31000 and ISO 26000) with sustainable development and positioning them according to organization levels (strategic, tactical and operational). The structure was designed based on Brundtland report concept. The analysis was performed exploring the generic framework for possible convergence based on Nadler and Tushman model. The results found the standards can contribute to a possible sustainable development induction in organizations, as long as they meet certain minimum conditions related to its strategic alignment.

Cosmic-ray antiprotons, positrons, and gamma rays from halo dark matter annihilation

NASA Technical Reports Server (NTRS)

Rudaz, S.; Stecker, F. W.

1988-01-01

The subject of cosmic ray antiproton production is reexamined by considering other choices for the nature of the Majorana fermion chi other than the photino considered in a previous article. The calculations are extended to include cosmic-ray positrons and cosmic gamma rays as annihilation products. Taking chi to be a generic higgsino or simply a heavy Majorana neutrino with standard couplings to the Z-zero boson allows the previous interpretation of the cosmic antiproton data to be maintained. In this case also, the annihilation cross section can be calculated independently of unknown particle physics parameters. Whereas the relic density of photinos with the choice of parameters in the previous paper turned out to be only a few percent of the closure density, the corresponding value for Omega in the generic higgsino or Majorana case is about 0.2, in excellent agreement with the value associated with galaxies and one which is sufficient to give the halo mass.

A generic biokinetic model for noble gases with application to radon.

PubMed

Leggett, Rich; Marsh, James; Gregoratto, Demetrio; Blanchardon, Eric

2013-06-01

To facilitate the estimation of radiation doses from intake of radionuclides, the International Commission on Radiological Protection (ICRP) publishes dose coefficients (dose per unit intake) based on reference biokinetic and dosimetric models. The ICRP generally has not provided biokinetic models or dose coefficients for intake of noble gases, but plans to provide such information for (222)Rn and other important radioisotopes of noble gases in a forthcoming series of reports on occupational intake of radionuclides (OIR). This paper proposes a generic biokinetic model framework for noble gases and develops parameter values for radon. The framework is tailored to applications in radiation protection and is consistent with a physiologically based biokinetic modelling scheme adopted for the OIR series. Parameter values for a noble gas are based largely on a blood flow model and physical laws governing transfer of a non-reactive and soluble gas between materials. Model predictions for radon are shown to be consistent with results of controlled studies of its biokinetics in human subjects.

A Generic Method for Distribution and Transfer of ECTS and Other Norm-Referenced Grades within Student Cohorts

ERIC Educational Resources Information Center

Warfvinge, Per

2008-01-01

The ECTS grade transfer scale is an interface grade scale to help European universities, students and employers to understand the level of student achievement. Hence, the ECTS scale can be seen as an interface, transforming local scales to a common system where A-E denote passing grades. By definition, ECTS should distribute the passing students…

Status, Vision, and Challenges of an Intelligent Distributed Engine Control Architecture (Postprint)

DTIC Science & Technology

2007-09-18

TERMS turbine engine control, engine health management, FADEC , Universal FADEC , Distributed Controls, UF, UF Platform, common FADEC , Generic FADEC ...Modular FADEC , Adaptive Control 16. SECURITY CLASSIFICATION OF: 19a. NAME OF RESPONSIBLE PERSON (Monitor) a. REPORT Unclassified b. ABSTRACT...Eventually the Full Authority Digital Electronic Control ( FADEC ) became the norm. Presently, this control system architecture accounts for 15 to 20% of

A Bayesian approach to assessing the uncertainty in estimating bioconcentration factors in earthworms--the example of quinoxyfen.

PubMed

Fragoulis, George; Merli, Annalisa; Reeves, Graham; Meregalli, Giovanna; Stenberg, Kristofer; Tanaka, Taku; Capri, Ettore

2011-06-01

Quinoxyfen is a fungicide of the phenoxyquinoline class used to control powdery mildew, Uncinula necator (Schw.) Burr. Owing to its high persistence and strong sorption in soil, it could represent a risk for soil organisms if they are exposed at ecologically relevant concentrations. The objective of this paper is to predict the bioconcentration factors (BCFs) of quinoxyfen in earthworms, selected as a representative soil organism, and to assess the uncertainty in the estimation of this parameter. Three fields in each of four vineyards in southern and northern Italy were sampled over two successive years. The measured BCFs varied over time, possibly owing to seasonal changes and the consequent changes in behaviour and ecology of earthworms. Quinoxyfen did not accumulate in soil, as the mean soil concentrations at the end of the 2 year monitoring period ranged from 9.16 to 16.0 µg kg⁻¹ dw for the Verona province and from 23.9 to 37.5 µg kg⁻¹ dw for the Taranto province, with up to eight applications per season. To assess the uncertainty of the BCF in earthworms, a probabilistic approach was used, firstly by building with weighted bootstrapping techniques a generic probabilistic density function (PDF) accounting for variability and incompleteness of knowledge. The generic PDF was then used to derive prior distribution functions, which, by application of Bayes' theorem, were updated with the new measurements and a posterior distribution was finally created. The study is a good example of probabilistic risk assessment. The means of mean and SD posterior estimates of log BCFworm (2.06, 0.91) are the 'best estimate values'. Further risk assessment of quinoxyfen and other phenoxyquinoline fungicides and realistic representative scenarios for modelling exercises required for future authorization and post-authorization requirements can now use this value as input. Copyright © 2011 Society of Chemical Industry.

Cost-effectiveness analysis of valsartan versus losartan and the effect of switching.

PubMed

Baker, Timothy M; Goh, Jowern; Johnston, Atholl; Falvey, Heather; Brede, Yvonne; Brown, Ruth E

2012-01-01

Losartan will shortly become generic, and this may encourage switching to the generic drug. However, valsartan was shown in a meta-analysis to be statistically superior in lowering blood pressure (BP) to losartan. This paper examines the costs of treatment with these two drugs and the potential consequences of switching established valsartan patients to generic losartan. A US payer cost-effectiveness model was developed incorporating the risk of cardiovascular disease (CVD) events related to systolic blood pressure (SBP) control comparing valsartan to continual losartan and switching from valsartan to generic losartan. The model, based upon a meta-analysis by Nixon et al. and Framingham equations, included first CVD event costs calculated from US administrative data sets and utility values from published sources. The modeled outcomes were number of CVD events, costs and incremental cost per quality-adjusted life-year (QALY) and life-year (LY). Fewer patients had fatal and non-fatal CVD events with valsartan therapy compared with continual losartan and with patients switched from valsartan to generic losartan. The base-case model results indicated that continued treatment with valsartan had an incremental cost-effectiveness ratio of $27,268 and $25,460 per life year gained, and $32,313 and $30,170 per QALY gained, relative to continual losartan and switching treatments, respectively. Sensitivity analyses found that patient discontinuation post-switching was a sensitive parameter. Including efficacy offsets with lowered adherence or discontinuation resulted in more favorable ratios for valsartan compared to switching therapy. The model does not evaluate post-primary CVD events and considers change in SBP from baseline level as the sole predictor of CVD risk. Valsartan appears to be cost-effective compared to switching to generic losartan and switching to the generic drug does not support a cost offset argument over the longer term. Physicians should continue to consider the needs of individual patient and not cost offsets.

Steady State Bioequivalence of Generic and Innovator Formulations of Stavudine, Lamivudine, and Nevirapine in HIV-Infected Ugandan Adults

PubMed Central

Byakika-Tusiime, Jayne; Chinn, Leslie W.; Oyugi, Jessica H.; Obua, Celestino; Bangsberg, David R.; Kroetz, Deanna L.

2008-01-01

Background Generic antiretroviral therapy is the mainstay of HIV treatment in resource-limited settings, yet there is little evidence confirming the bioequivalence of generic and brand name formulations. We compared the steady-state pharmacokinetics of lamivudine, stavudine and nevirapine in HIV-infected subjects who were receiving a generic formulation (Triomune®) or the corresponding brand formulations (Epivir®, Zerit®, and Viramune®). Methodology/Principal Findings An open-label, randomized, crossover study was carried out in 18 HIV-infected Ugandan subjects stabilized on Triomune-40. Subjects received lamivudine (150 mg), stavudine (40 mg), and nevirapine (200 mg) in either the generic or brand formulation twice a day for 30 days, before switching to the other formulation. At the end of each treatment period, blood samples were collected over 12 h for pharmacokinetic analysis. The main outcome measures were the mean AUC0–12h and Cmax. Bioequivalence was defined as a geometric mean ratio between the generic and brand name within the 90% confidence interval of 0.8–1.25. The geometric mean ratios and the 90% confidence intervals were: stavudine Cmax, 1.3 (0.99–1.71) and AUC0–12h, 1.1 (0.87–1.38); lamivudine Cmax, 0.8 (0.63–0.98) and AUC0–12h, 0.8 (0.65–0.99); and nevirapine Cmax, 1.1 (0.95–1.23) and AUC0–12h, 1.1 (0.95–1.31). The generic formulation was not statistically bioequivalent to the brand formulations during steady state, although exposures were comparable. A mixed random effects model identified about 50% intersubject variability in the pharmacokinetic parameters. Conclusions/Significant Findings These findings provide support for the use of Triomune in resource-limited settings, although identification of the sources of intersubject variability in these populations is critical. PMID:19096711

Nonlinear Landau damping and formation of Bernstein-Greene-Kruskal structures for plasmas with q-nonextensive velocity distributions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raghunathan, M.; Ganesh, R.

2013-03-15

In the past, long-time evolution of an initial perturbation in collisionless Maxwellian plasma (q = 1) has been simulated numerically. The controversy over the nonlinear fate of such electrostatic perturbations was resolved by Manfredi [Phys. Rev. Lett. 79, 2815-2818 (1997)] using long-time simulations up to t=1600{omega}{sub p}{sup -1}. The oscillations were found to continue indefinitely leading to Bernstein-Greene-Kruskal (BGK)-like phase-space vortices (from here on referred as 'BGK structures'). Using a newly developed, high resolution 1D Vlasov-Poisson solver based on piecewise-parabolic method (PPM) advection scheme, we investigate the nonlinear Landau damping in 1D plasma described by toy q-distributions for long times,more » up to t=3000{omega}{sub p}{sup -1}. We show that BGK structures are found only for a certain range of q-values around q = 1. Beyond this window, for the generic parameters, no BGK structures were observed. We observe that for values of q<1 where velocity distributions have long tails, strong Landau damping inhibits the formation of BGK structures. On the other hand, for q>1 where distribution has a sharp fall in velocity, the formation of BGK structures is rendered difficult due to high wave number damping imposed by the steep velocity profile, which had not been previously reported. Wherever relevant, we compare our results with past work.« less

Image irradiance distribution in the 3MI wide field of view polarimeter

NASA Astrophysics Data System (ADS)

Gabrieli, Riccardo; Bartoli, Alessandro; Maiorano, Michele; Bruno, Umberto; Olivieri, Monica; Calamai, Luciano; Manolis, Ilias; Labate, Demetrio

2015-09-01

The Multi-Viewing, Multi-Channel, Multi-Polarisation Imager (3MI) is an imaging radiometer for the ESA/Eumetsat MeteOp-SG programme. Based on the heritage of the POLDER/PARASOL instrument, 3MI is designed to collect global observations of the top-of-atmosphere polarised bi-directional reflectance distribution function in 12 spectral bands, by observing the same target from multiple views using a pushbroom scanning concept. The demanding challenge of the 3MI optical design is represented by the polarisation and image irradiance fall-off (throughput uniformity) requirements. In a generic optical system, the image irradiance fall-off is a function of: target radiance distribution and polarisation, entrance pupil size and optical transmittance variations across the field of view (FOV), distortion and vignetting. In most applications these aspects can be considered as independent; however, when high image irradiance uniformity is required, they have to be considered as linked together. This is particularly true in case of a wide FOV polarimeter as 3MI is. In order to properly account for these aspects, an irradiance fall-off analytical model has been developed in the frame of 3MI Optics Pre-Development (OPD), whose aim is to mitigate any technological risks associated with the 3MI instrument development. It is shown how it is possible to control the image irradiance distribution acting on optical design parameters (e.g. distortion and entrance pupil size variation with FOV). Moreover, the impact of polarisation performances on irradiance fall-off is discussed.

Parameter Estimation for Compact Binaries with Ground-Based Gravitational-Wave Observations Using the LALInference

NASA Technical Reports Server (NTRS)

Veitch, J.; Raymond, V.; Farr, B.; Farr, W.; Graff, P.; Vitale, S.; Aylott, B.; Blackburn, K.; Christensen, N.; Coughlin, M.

2015-01-01

The Advanced LIGO and Advanced Virgo gravitational wave (GW) detectors will begin operation in the coming years, with compact binary coalescence events a likely source for the first detections. The gravitational waveforms emitted directly encode information about the sources, including the masses and spins of the compact objects. Recovering the physical parameters of the sources from the GW observations is a key analysis task. This work describes the LALInference software library for Bayesian parameter estimation of compact binary signals, which builds on several previous methods to provide a well-tested toolkit which has already been used for several studies. We show that our implementation is able to correctly recover the parameters of compact binary signals from simulated data from the advanced GW detectors. We demonstrate this with a detailed comparison on three compact binary systems: a binary neutron star (BNS), a neutron star - black hole binary (NSBH) and a binary black hole (BBH), where we show a cross-comparison of results obtained using three independent sampling algorithms. These systems were analysed with non-spinning, aligned spin and generic spin configurations respectively, showing that consistent results can be obtained even with the full 15-dimensional parameter space of the generic spin configurations. We also demonstrate statistically that the Bayesian credible intervals we recover correspond to frequentist confidence intervals under correct prior assumptions by analysing a set of 100 signals drawn from the prior. We discuss the computational cost of these algorithms, and describe the general and problem-specific sampling techniques we have used to improve the efficiency of sampling the compact binary coalescence (CBC) parameter space.

[Bioequivalence of dermatological topical medicines:the Brazilian scenario and the challenges for health surveillance].

PubMed

Soares, Kelen Carine Costa; Moraes, Marcelo Vogler; Gelfuso, Guilherme Martins; Gratieri, Taís

2015-11-01

The comparative evaluation required for the registration of generic topical medicines in Brazil is conducted by means of a pharmaceutical equivalence study, which merely assesses the physical/chemical and microbiological parameters of the formulations. At the international level, clinical or pharmacodynamic studies are now being required to prove the efficacy and safety of semisolid topical generic formulations. This work presents a comparison of the different requirements for the registration of topical formulations, taking into consideration the various regulatory authorities, and presents a survey of topical medicines registered in Brazil prior to 2013. The survey revealed that in comparison with the USA there were many more copies of these formulations registered in Brazil. This fact, together with the large number of studies in the literature showing the lack of bioequivalence of topical medication, is clear proof of the major importance of the need to realign Brazilian legislation with respect to the technical requirements for the registration of generic and similar medication for dermatological topical application in Brazil.

SEL Ada reuse analysis and representations

NASA Technical Reports Server (NTRS)

Kester, Rush

1990-01-01

Overall, it was revealed that the pattern of Ada reuse has evolved from initial reuse of utility components into reuse of generalized application architectures. Utility components were both domain-independent utilities, such as queues and stacks, and domain-specific utilities, such as those that implement spacecraft orbit and attitude mathematical functions and physics or astronomical models. The level of reuse was significantly increased with the development of a generalized telemetry simulator architecture. The use of Ada generics significantly increased the level of verbatum reuse, which is due to the ability, using Ada generics, to parameterize the aspects of design that are configurable during reuse. A key factor in implementing generalized architectures was the ability to use generic subprogram parameters to tailor parts of the algorithm embedded within the architecture. The use of object oriented design (in which objects model real world entities) significantly improved the modularity for reuse. Encapsulating into packages the data and operations associated with common real world entities creates natural building blocks for reuse.

Big Bang Bifurcation Analysis and Allee Effect in Generic Growth Functions

NASA Astrophysics Data System (ADS)

Leonel Rocha, J.; Taha, Abdel-Kaddous; Fournier-Prunaret, D.

2016-06-01

The main purpose of this work is to study the dynamics and bifurcation properties of generic growth functions, which are defined by the population size functions of the generic growth equation. This family of unimodal maps naturally incorporates a principal focus of ecological and biological research: the Allee effect. The analysis of this kind of extinction phenomenon allows to identify a class of Allee’s functions and characterize the corresponding Allee’s effect region and Allee’s bifurcation curve. The bifurcation analysis is founded on the performance of fold and flip bifurcations. The dynamical behavior is rich with abundant complex bifurcation structures, the big bang bifurcations of the so-called “box-within-a-box” fractal type being the most outstanding. Moreover, these bifurcation cascades converge to different big bang bifurcation curves with distinct kinds of boxes, where for the corresponding parameter values several attractors are associated. To the best of our knowledge, these results represent an original contribution to clarify the big bang bifurcation analysis of continuous 1D maps.

Impact of pharmacy benefit design on prescription drug utilization: a fixed effects analysis of plan sponsor data.

PubMed

Roebuck, M Christopher; Liberman, Joshua N

2009-06-01

To study the impact of various elements of pharmacy benefit design on both the absolute and relative utilization of generics, brands, retail pharmacy, and mail service. Panel data on 1,074 plan sponsors covering 21.6 million individuals over 12 calendar quarters (2005-2007). A retrospective analysis of pharmacy claims. To control for potential endogeneity, linear fixed effects models were estimated for each of six dependent variables: the generic utilization rate, the brand utilization rate, the generic dispensing rate (GDR), the retail pharmacy utilization rate, the mail service utilization rate, and the mail distribution rate. Most member cost-share variables were nonlinearly associated with changes in prescription drug utilization. Marginal effects were generally greater in magnitude for brand out-of-pocket costs than for generic out-of-pocket costs. Time dummies, as well as other pharmacy benefit design elements, also yielded significant results. Prior estimates of the effect of member cost sharing on prescription drug utilization may be biased if complex benefit designs, mail service fulfillment, and unmeasured factors such as pharmaceutical pipelines are not accounted for. Commonly cited relative utilization metrics, such as GDR, may be misleading if not examined alongside absolute prescription drug utilization.

Conditions for l =1 Pomeranchuk instability in a Fermi liquid

NASA Astrophysics Data System (ADS)

Wu, Yi-Ming; Klein, Avraham; Chubukov, Andrey V.

2018-04-01

We perform a microscopic analysis of how the constraints imposed by conservation laws affect q =0 Pomeranchuk instabilities in a Fermi liquid. The conventional view is that these instabilities are determined by the static interaction between low-energy quasiparticles near the Fermi surface, in the limit of vanishing momentum transfer q . The condition for a Pomeranchuk instability is set by Flc (s )=-1 , where Flc (s ) (a Landau parameter) is a properly normalized partial component of the antisymmetrized static interaction F (k ,k +q ;p ,p -q ) in a charge (c) or spin (s) subchannel with angular momentum l . However, it is known that conservation laws for total spin and charge prevent Pomeranchuk instabilities for l =1 spin- and charge-current order parameters. Our study aims to understand whether this holds only for these special forms of l =1 order parameters or is a more generic result. To this end we perform a diagrammatic analysis of spin and charge susceptibilities for charge and spin density order parameters, as well as perturbative calculations to second order in the Hubbard U . We argue that for l =1 spin-current and charge-current order parameters, certain vertex functions, which are determined by high-energy fermions, vanish at Fl=1 c (s )=-1 , preventing a Pomeranchuk instability from taking place. For an order parameter with a generic l =1 form factor, the vertex function is not expressed in terms of Fl=1 c (s ), and a Pomeranchuk instability may occur when F1c (s )=-1 . We argue that for other values of l , a Pomeranchuk instability may occur at Flc (s )=-1 for an order parameter with any form factor.

Spatio-temporal conditional inference and hypothesis tests for neural ensemble spiking precision

PubMed Central

Harrison, Matthew T.; Amarasingham, Asohan; Truccolo, Wilson

2014-01-01

The collective dynamics of neural ensembles create complex spike patterns with many spatial and temporal scales. Understanding the statistical structure of these patterns can help resolve fundamental questions about neural computation and neural dynamics. Spatio-temporal conditional inference (STCI) is introduced here as a semiparametric statistical framework for investigating the nature of precise spiking patterns from collections of neurons that is robust to arbitrarily complex and nonstationary coarse spiking dynamics. The main idea is to focus statistical modeling and inference, not on the full distribution of the data, but rather on families of conditional distributions of precise spiking given different types of coarse spiking. The framework is then used to develop families of hypothesis tests for probing the spatio-temporal precision of spiking patterns. Relationships among different conditional distributions are used to improve multiple hypothesis testing adjustments and to design novel Monte Carlo spike resampling algorithms. Of special note are algorithms that can locally jitter spike times while still preserving the instantaneous peri-stimulus time histogram (PSTH) or the instantaneous total spike count from a group of recorded neurons. The framework can also be used to test whether first-order maximum entropy models with possibly random and time-varying parameters can account for observed patterns of spiking. STCI provides a detailed example of the generic principle of conditional inference, which may be applicable in other areas of neurostatistical analysis. PMID:25380339

Quantum walled Brauer algebra: commuting families, Baxterization, and representations

NASA Astrophysics Data System (ADS)

Semikhatov, A. M.; Tipunin, I. Yu

2017-02-01

For the quantum walled Brauer algebra, we construct its Specht modules and (for generic parameters of the algebra) seminormal modules. The latter construction yields the spectrum of a commuting family of Jucys-Murphy elements. We also propose a Baxterization prescription; it involves representing the quantum walled Brauer algebra in terms of morphisms in a braided monoidal category and introducing parameters into these morphisms, which allows constructing a ‘universal transfer matrix’ that generates commuting elements of the algebra.

40 CFR 86.096-38 - Maintenance instructions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and distributing the information, excluding any research and development costs incurred in designing... available through, for example, generic aftermarket tools, a pass-through device, or inexpensive... dealerships, whichever is earlier. The index shall describe the title of the course or instructional session...

40 CFR 86.1808-01 - Maintenance instructions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and distributing the information, excluding any research and development costs incurred in designing... available through, for example, generic aftermarket tools, a pass-through device, or inexpensive... dealerships, whichever is earlier. The index shall describe the title of the course or instructional session...

Least Squares Approach to the Alignment of the Generic High Precision Tracking System

NASA Astrophysics Data System (ADS)

de Renstrom, Pawel Brückman; Haywood, Stephen

2006-04-01

A least squares method to solve a generic alignment problem of a high granularity tracking system is presented. The algorithm is based on an analytical linear expansion and allows for multiple nested fits, e.g. imposing a common vertex for groups of particle tracks is of particular interest. We present a consistent and complete recipe to impose constraints on either implicit or explicit parameters. The method has been applied to the full simulation of a subset of the ATLAS silicon tracking system. The ultimate goal is to determine ≈35,000 degrees of freedom (DoF's). We present a limited scale exercise exploring various aspects of the solution.

Digit replacement: A generic map for nonlinear dynamical systems.

PubMed

García-Morales, Vladimir

2016-09-01

A simple discontinuous map is proposed as a generic model for nonlinear dynamical systems. The orbit of the map admits exact solutions for wide regions in parameter space and the method employed (digit manipulation) allows the mathematical design of useful signals, such as regular or aperiodic oscillations with specific waveforms, the construction of complex attractors with nontrivial properties as well as the coexistence of different basins of attraction in phase space with different qualitative properties. A detailed analysis of the dynamical behavior of the map suggests how the latter can be used in the modeling of complex nonlinear dynamics including, e.g., aperiodic nonchaotic attractors and the hierarchical deposition of grains of different sizes on a surface.

Generic analysis of kinetically driven inflation

NASA Astrophysics Data System (ADS)

Saitou, Rio

2018-04-01

We perform a model-independent analysis of kinetically driven inflation (KDI) which (partially) includes generalized G-inflation and ghost inflation. We evaluate the background evolution splitting into the inflationary attractor and the perturbation around it. We also consider the quantum fluctuation of the scalar mode with a usual scaling and derive the spectral index, ignoring the contribution from the second-order products of slow-roll parameters. Using these formalisms, we find that within our generic framework the models of KDI which possess the shift symmetry of scalar field cannot create the quantum fluctuation consistent with the observation. Breaking the shift symmetry, we obtain a few essential conditions for viable models of KDI associated with the graceful exit.

Biokinetic data and models for occupational intake of lanthanoids

DOE PAGES

Leggett, Richard Wayne; Ansoborlo, Eric; Bailey, Michael; ...

2014-05-12

The lanthanoid (or lanthanide) chemical elements comprise fifteen elements with atomic numbers 57 (lanthanum) through 71 (lutetium). This paper reviews data related to the biological behavior of these elements in the human body and proposes biokinetic models for application to occupational intake of radio-lanthanoids. Generic (element-independent) absorption rates from the respiratory and alimentary tracts to blood are proposed. The proposed systemic models are largely generic but include some element-specific parameter values to reflect regular changes with ionic radius in certain aspects of the behavior of the lanthanoids. This work was performed within the internal dosimetry task group (INDOS) of Committeemore » 2 of the International Commission on Radiological Protection (ICRP).« less

Mesh Algorithms for PDE with Sieve I: Mesh Distribution

DOE PAGES

Knepley, Matthew G.; Karpeev, Dmitry A.

2009-01-01

We have developed a new programming framework, called Sieve, to support parallel numerical partial differential equation(s) (PDE) algorithms operating over distributed meshes. We have also developed a reference implementation of Sieve in C++ as a library of generic algorithms operating on distributed containers conforming to the Sieve interface. Sieve makes instances of the incidence relation, or arrows, the conceptual first-class objects represented in the containers. Further, generic algorithms acting on this arrow container are systematically used to provide natural geometric operations on the topology and also, through duality, on the data. Finally, coverings and duality are used to encode notmore » only individual meshes, but all types of hierarchies underlying PDE data structures, including multigrid and mesh partitions. In order to demonstrate the usefulness of the framework, we show how the mesh partition data can be represented and manipulated using the same fundamental mechanisms used to represent meshes. We present the complete description of an algorithm to encode a mesh partition and then distribute a mesh, which is independent of the mesh dimension, element shape, or embedding. Moreover, data associated with the mesh can be similarly distributed with exactly the same algorithm. The use of a high level of abstraction within the Sieve leads to several benefits in terms of code reuse, simplicity, and extensibility. We discuss these benefits and compare our approach to other existing mesh libraries.« less

SU-E-T-365: Estimation of Neutron Ambient Dose Equivalents for Radioprotection Exposed Workers in Radiotherapy Facilities Based On Characterization Patient Risk Estimation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irazola, L; Terron, J; Sanchez-Doblado, F

2015-06-15

Purpose: Previous measurements with Bonner spheres{sup 1} showed that normalized neutron spectra are equal for the majority of the existing linacs{sup 2}. This information, in addition to thermal neutron fluences obtained in the characterization procedure{sup 3}3, would allow to estimate neutron doses accidentally received by exposed workers, without the need of an extra experimental measurement. Methods: Monte Carlo (MC) simulations demonstrated that the thermal neutron fluence distribution inside the bunker is quite uniform, as a consequence of multiple scatter in the walls{sup 4}. Although inverse square law is approximately valid for the fast component, a more precise calculation could bemore » obtained with a generic fast fluence distribution map around the linac, from MC simulations{sup 4}. Thus, measurements of thermal neutron fluences performed during the characterization procedure{sup 3}, together with a generic unitary spectra{sup 2}, would allow to estimate the total neutron fluences and H*(10) at any point{sup 5}. As an example, we compared estimations with Bonner sphere measurements{sup 1}, for two points in five facilities: 3 Siemens (15–23 MV), Elekta (15 MV) and Varian (15 MV). Results: Thermal neutron fluences obtained from characterization, are within (0.2–1.6×10{sup 6}) cm−{sup 2}•Gy{sup −1} for the five studied facilities. This implies ambient equivalent doses ranging from (0.27–2.01) mSv/Gy 50 cm far from the isocenter and (0.03–0.26) mSv/Gy at detector location with an average deviation of ±12.1% respect to Bonner measurements. Conclusion: The good results obtained demonstrate that neutron fluence and H*(10) can be estimated based on: (a) characterization procedure established for patient risk estimation in each facility, (b) generic unitary neutron spectrum and (c) generic MC map distribution of the fast component. [1] Radiat. Meas (2010) 45: 1391 – 1397; [2] Phys. Med. Biol (2012) 5 7:6167–6191; [3] Med. Phys (2015) 42:276 - 281. [4] IFMBE (2012) 39: 1245–1248. [5] ICRU Report 57 (1998)« less

Context-dependent effects of noise on echolocation pulse characteristics in free-tailed bats

PubMed Central

Smotherman, Michael S.

2010-01-01

Background noise evokes a similar suite of adaptations in the acoustic structure of communication calls across a diverse range of vertebrates. Echolocating bats may have evolved specialized vocal strategies for echolocating in noise, but also seem to exhibit generic vertebrate responses such as the ubiquitous Lombard response. We wondered how bats balance generic and echolocation-specific vocal responses to noise. To address this question, we first characterized the vocal responses of flying free-tailed bats (Tadarida brasiliensis) to broadband noises varying in amplitude. Secondly, we measured the bats’ responses to band-limited noises that varied in the extent of overlap with their echolocation pulse bandwidth. We hypothesized that the bats’ generic responses to noise would be graded proportionally with noise amplitude, total bandwidth and frequency content, and consequently that more selective responses to band-limited noise such as the jamming avoidance response could be explained by a linear decomposition of the response to broadband noise. Instead, the results showed that both the nature and the magnitude of the vocal responses varied with the acoustic structure of the outgoing pulse as well as non-linearly with noise parameters. We conclude that free-tailed bats utilize separate generic and specialized vocal responses to noise in a context-dependent fashion. PMID:19672604

Distributed Computerized Catalog System

NASA Technical Reports Server (NTRS)

Borgen, Richard L.; Wagner, David A.

1995-01-01

DarkStar Distributed Catalog System describes arbitrary data objects in unified manner, providing end users with versatile, yet simple search mechanism for locating and identifying objects. Provides built-in generic and dynamic graphical user interfaces. Design of system avoids some of problems of standard DBMS, and system provides more flexibility than do conventional relational data bases, or object-oriented data bases. Data-collection lattice partly hierarchical representation of relationships among collections, subcollections, and data objects.

A simple mathematical model of gradual Darwinian evolution: emergence of a Gaussian trait distribution in adaptation along a fitness gradient.

PubMed

Biktashev, Vadim N

2014-04-01

We consider a simple mathematical model of gradual Darwinian evolution in continuous time and continuous trait space, due to intraspecific competition for common resource in an asexually reproducing population in constant environment, while far from evolutionary stable equilibrium. The model admits exact analytical solution. In particular, Gaussian distribution of the trait emerges from generic initial conditions.

Robust control synthesis for uncertain dynamical systems

NASA Technical Reports Server (NTRS)

Byun, Kuk-Whan; Wie, Bong; Sunkel, John

1989-01-01

This paper presents robust control synthesis techniques for uncertain dynamical systems subject to structured parameter perturbation. Both QFT (quantitative feedback theory) and H-infinity control synthesis techniques are investigated. Although most H-infinity-related control techniques are not concerned with the structured parameter perturbation, a new way of incorporating the parameter uncertainty in the robust H-infinity control design is presented. A generic model of uncertain dynamical systems is used to illustrate the design methodologies investigated in this paper. It is shown that, for a certain noncolocated structural control problem, use of both techniques results in nonminimum phase compensation.

Manned Orbital Transfer Vehicle (MOTV). Volume 4: Supporting analysis

NASA Technical Reports Server (NTRS)

Boyland, R. E.; Sherman, S. W.; Morfin, H. W.

1979-01-01

Generic missions were defined to enable potential users to determine the parameters for suggested user projects. Mission modes were identified for providing operation, interfaces, performance, and cost data for studying payloads. Safety requirements for emergencies during various phases of the mission are considered with emphasis on radiation hazards.

Transient performance of fan engine with water ingestion

NASA Technical Reports Server (NTRS)

Murthy, S. N. B.; Mullican, A.

1993-01-01

In a continuing investigation on developing and applying codes for prediction of performance of a turbine jet engine and its components with water ingestion during flight operation, including power settings, and flight altitudes and speed changes, an attempt was made to establish the effects of water ingestion through simulation of a generic high bypass ratio engine with a generic control. In view of the large effects arising in the air compression system and the prediffuser-combustor unit during water ingestion, attention was focused on those effects and the resulting changes in engine performance. Under all conditions of operation, whether ingestion is steady or not, it became evident that water ingestion causes a fan-compressor unit to operate in a time-dependent fashion with periodic features, particularly with respect to the state of water in the span and the film in the casing clearance space, at the exit of the machine. On the other hand, the aerodynamic performance of the unit may be considered as quasi-steady once the distribution of water has attained an equilibrium state with respect to its distribution and motion. For purposes of engine simulation, the performance maps for the generic fan-compressor unit were generated based on the attainment of a quasi-steady state (meaning steady except for long-period variations in performance) during ingestion and operation over a wide enough range of rotational speeds.

[Competition for the promotion of essential generic drugs in Africa].

PubMed

Bruneton, C; Favre, I; Fontaine, D; Maritoux, J; Rey, J L

1999-01-01

in most sub-Saharan countries, an extensive economic crisis coupled with a low level of existing resources has put most pharmaceuticals beyond the reach of the general public. This situation was worsened by the devaluation of the Franc CFA in 1994. The supply of lowprice drugs and the improvement of rational drug use is now a priority. Unfortunately, essential generic drugs are little known and used in Africa. 1. To improve the knowledge of and confidence in essential and generic drugs among providers, prescribers and consumers, through the participation of the general public in an incentive-based, creative competition; 2. To collect locally-adapted promotional material, to be used in the future promotion of essential and generic drugs in Africa. Design, setting and method: a competition was announced in June 1995, via various networks, in French-speaking Africa: the population was invited to create one or several items promoting essential generic drugs. These items included slogans, posters, songs and short plays. Over 550 entries were received before the deadline (15 October 1995), from 22 countries (mostly Sub-Saharan and French-speaking). The entries included 387 slogans, 94 posters, 22 plays, and various (photos, comic strips, songs, poems). 1. Greater awareness of essential generic drugs in Western Africa, through the publicity given to the competition; 2. Selection of a pool of approximately 200 promotional items, produced by the target populations, to be published in a catalog and distributed in African countries; 3. Insights into popular practices and representations of Western medications, and local re-interpretation of the concept. this public competition was effective at achieving three important goals: 1. Dynamic promotion (the competition was the opportunity for school projects, radio talkshows, etc. on generic drugs); 2. Re appropriation of a policy, thanks to a participative approach; 3. Analysis of the population's general comprehension of pharmaceuticals, through analysis of competition entries.

Medicine prices, availability, and affordability in 36 developing and middle-income countries: a secondary analysis.

PubMed

Cameron, A; Ewen, M; Ross-Degnan, D; Ball, D; Laing, R

2009-01-17

WHO and Health Action International (HAI) have developed a standardised method for surveying medicine prices, availability, affordability, and price components in low-income and middle-income countries. Here, we present a secondary analysis of medicine availability in 45 national and subnational surveys done using the WHO/HAI methodology. Data from 45 WHO/HAI surveys in 36 countries were adjusted for inflation or deflation and purchasing power parity. International reference prices from open international procurements for generic products were used as comparators. Results are presented for 15 medicines included in at least 80% of surveys and four individual medicines. Average public sector availability of generic medicines ranged from 29.4% to 54.4% across WHO regions. Median government procurement prices for 15 generic medicines were 1.11 times corresponding international reference prices, although purchasing efficiency ranged from 0.09 to 5.37 times international reference prices. Low procurement prices did not always translate into low patient prices. Private sector patients paid 9-25 times international reference prices for lowest-priced generic products and over 20 times international reference prices for originator products across WHO regions. Treatments for acute and chronic illness were largely unaffordable in many countries. In the private sector, wholesale mark-ups ranged from 2% to 380%, whereas retail mark-ups ranged from 10% to 552%. In countries where value added tax was applied to medicines, the amount charged varied from 4% to 15%. Overall, public and private sector prices for originator and generic medicines were substantially higher than would be expected if purchasing and distribution were efficient and mark-ups were reasonable. Policy options such as promoting generic medicines and alternative financing mechanisms are needed to increase availability, reduce prices, and improve affordability.

A comparative radiological assessment of five European biosphere systems in the context of potential contamination of well water from the hypothetical disposal of radioactive waste.

PubMed

Olyslaegers, G; Zeevaert, T; Pinedo, P; Simon, I; Pröhl, G; Kowe, R; Chen, Q; Mobbs, S; Bergström, U; Hallberg, B; Katona, T; Eged, K; Kanyar, B

2005-12-01

In the framework of the BioMoSA project for the development of biosphere assessment models for radioactive waste disposal the Reference Biosphere Methodology developed in the IAEA programme BIOMASS was applied to five locations, situated in different European countries. Specific biosphere models were applied to assess the hypothetical contamination of a range of agricultural and environmental pathways and the dose to individuals, following contamination of well water. The results of these site-specific models developed by the different BioMoSA partners, and the individual normalised dose to the exposure groups were compared against each other. Ingestion of drinking water, fruit and vegetables were found to be among the most important pathways for almost all radionuclides. Stochastic calculations revealed that consumption habits, transfer factors, irrigation rates and distribution coefficients (Kd(s)) were the most important parameters that influence the end results. Variations in the confidence intervals were found to be higher for sorbing elements (e.g. (36)Cl, (237)Np, (99)Tc, (238)U, (129)I) than for mobile elements (e.g. (226)Ra, (79)Se, (135)Cs, (231)Pa, (239)Pu). The influence of daughter products, for which the distribution into the biosphere was calculated individually, was also shown to be important. This paper gives a brief overview of the deterministic and stochastic modelling results and the parameter sensitivity. A screening methodology was introduced to identify the most important pathways, simplify a generic biosphere tool and refine the existing models.

Postmarketing in vitro/in vivo assessment of fixed dose combination products of first line antiretrovirals.

PubMed

Joshi, A; Esseku, F; Silva, L; Igwilo, C; Oqua, D; Kunle, B; Obodozie, O; Inyang, U; Adeyeye, Moji C

2010-06-01

The purpose of this study was to evaluate the postmarket pharmaceutical equivalence, stability and bioequivalence of generic and innovator fixed dose combination products of lamivudine (3TC) and zidovudine (AZT) 150/300 mg tablets available in Nigeria. An isocratic HPLC-UV method was developed and validated for the quantitative determination of 3TC and AZT in human plasma and pharmaceutical samples. The model independent f(2) similarity factor was used to compare the dissolution profiles of the two products stored at accelerated and long-term stability conditions for 6 months. The f(2) values for 3TC and AZT in both products were found to be greater than 51. Also, the tablets were stable according to the USP potency and drug dissolution criteria with more than 80% of drug dissolution in 30 min indicating the pharmaceutical equivalence of the two products. The 90% confidence interval for the ratios of generic/innovator pharmacokinetic parameters for 3TC/AZT were 73.5-112.6/63.4-95.8 (C(max)); 68.5-105.6/68.0-114.8 (AUC(0-t)); and 64.2-106.2/80.1-120.3 (AUC(0-infinity)) respectively. The pharmacokinetic parameters failed to fully demonstrate bioequivalence between the products. The results underscored the importance of assessing the quality of the combination drug products that would ensure the safety and efficacy of the generic drug products available in the market. (c) 2010 Wiley-Liss, Inc. and the American Pharmacists Association

Generic tags for Mn(ii) and Gd(iii) spin labels for distance measurements in proteins.

PubMed

Yang, Yin; Gong, Yan-Jun; Litvinov, Aleksei; Liu, Hong-Kai; Yang, Feng; Su, Xun-Cheng; Goldfarb, Daniella

2017-10-11

High-affinity chelating tags for Gd(iii) and Mn(ii) ions that provide valuable high-resolution distance restraints for biomolecules were used as spin labels for double electron-electron resonance (DEER) measurements. The availability of a generic tag that can bind both metal ions and provide a narrow and predictable distance distribution for both ions is attractive owing to their different EPR-related characteristics. Herein we introduced two paramagnetic tags, 4PSPyMTA and 4PSPyNPDA, which are conjugated to cysteine residues through a stable thioether bond, forming a short and, depending on the metal ion coordination mode, a rigid tether with the protein. These tags exhibit high affinity for both Mn(ii) and Gd(iii) ions. The DEER performance of the 4PSPyMTA and 4PSPyNPDA tags, in complex with Gd(iii) or Mn(ii), was evaluated for three double cysteine mutants of ubiquitin, and the Gd(iii)-Gd(iii) and Mn(ii)-Mn(ii) distance distributions they generated were compared. All three Gd(iii) complexes of the ubiquitin-PyMTA and ubiquitin-PyNPDA conjugates produced similar and expected distance distributions. In contrast, significant variations in the maxima and widths of the distance distributions were observed for the Mn(ii) analogs. Furthermore, whereas PyNPDA-Gd(iii) and PyNPDA-Mn(ii) delivered similar distance distributions, appreciable differences were observed for two mutants with PyMTA, with the Mn(ii) analog exhibiting a broader distance distribution and shorter distances. ELDOR (electron-electron double resonance)-detected NMR measurements revealed some distribution in the Mn(ii) coordination environment for the protein conjugates of both tags but not for the free tags. The broader distance distributions generated by 4PSPyMTA-Mn(ii), as compared with Gd(iii), were attributed to the distributed location of the Mn(ii) ion within the PyMTA chelate owing to its smaller size and lower coordination number that leave the pyridine nitrogen uncoordinated. Accordingly, in terms of distance resolution, 4PSPyNPDA can serve as an effective generic tag for Gd(iii) and Mn(ii), whereas 4PSPyMTA is efficient for Gd(iii) only. This comparison between Gd(iii) and Mn(ii) suggests that PyMTA model compounds may not predict sufficiently well the performance of PyMTA-Mn(ii) as a tag for high-resolution distance measurements in proteins because the protein environment can influence its coordination mode.

Comparative plasma and tissue distribution of Sun Pharma's generic doxorubicin HCl liposome injection versus Caelyx® (doxorubicin HCl liposome injection) in syngeneic fibrosarcoma-bearing BALB/c mice and Sprague-Dawley rats.

PubMed

Burade, Vinod; Bhowmick, Subhas; Maiti, Kuntal; Zalawadia, Rishit; Jain, Deepak; Rajamannar, Thennati

2017-05-01

The liposomal formulation of doxorubicin [doxorubicin (DXR) hydrochloride (HCl) liposome injection, Caelyx ® ] alters the tissue distribution of DXR as compared with nonliposomal DXR, resulting in an improved benefit-risk profile. We conducted studies in murine models to compare the plasma and tissue distribution of a proposed generic DXR HCl liposome injection developed by Sun Pharmaceuticals Industries Limited (SPIL DXR HCl liposome injection) with Caelyx ® . The plasma and tissue distributions of the SPIL and reference DXR HCl liposome injections were compared in syngeneic fibrosarcoma-bearing BALB/c mice and Sprague-Dawley rats. Different batches and different lots of the same batch of the reference product were also compared with each other. The SPIL and reference DXR HCl liposome injections exhibited generally comparable plasma and tissue distribution profiles in both models. While minor differences were observed between the two products in some tissues, different batches and lots of the reference product also showed some differences in the distribution of various analytes in some tissues. The ratios of estimated free to encapsulated DXR for plasma and tissue were generally comparable between the SPIL and reference DXR HCl liposome injections in both models, indicating similar extents of absorption into the tissues and similar rates of drug release from liposomes. The plasma and tissue distribution profiles of the SPIL and reference DXR HCl liposome injections were shown to be generally comparable. Inconsistencies between the products observed in some tissues were thought to be due to biological variation.

Massive optimal data compression and density estimation for scalable, likelihood-free inference in cosmology

NASA Astrophysics Data System (ADS)

Alsing, Justin; Wandelt, Benjamin; Feeney, Stephen

2018-07-01

Many statistical models in cosmology can be simulated forwards but have intractable likelihood functions. Likelihood-free inference methods allow us to perform Bayesian inference from these models using only forward simulations, free from any likelihood assumptions or approximations. Likelihood-free inference generically involves simulating mock data and comparing to the observed data; this comparison in data space suffers from the curse of dimensionality and requires compression of the data to a small number of summary statistics to be tractable. In this paper, we use massive asymptotically optimal data compression to reduce the dimensionality of the data space to just one number per parameter, providing a natural and optimal framework for summary statistic choice for likelihood-free inference. Secondly, we present the first cosmological application of Density Estimation Likelihood-Free Inference (DELFI), which learns a parametrized model for joint distribution of data and parameters, yielding both the parameter posterior and the model evidence. This approach is conceptually simple, requires less tuning than traditional Approximate Bayesian Computation approaches to likelihood-free inference and can give high-fidelity posteriors from orders of magnitude fewer forward simulations. As an additional bonus, it enables parameter inference and Bayesian model comparison simultaneously. We demonstrate DELFI with massive data compression on an analysis of the joint light-curve analysis supernova data, as a simple validation case study. We show that high-fidelity posterior inference is possible for full-scale cosmological data analyses with as few as ˜104 simulations, with substantial scope for further improvement, demonstrating the scalability of likelihood-free inference to large and complex cosmological data sets.

Generic entry, reformulations and promotion of SSRIs in the US.

PubMed

Huskamp, Haiden A; Donohue, Julie M; Koss, Catherine; Berndt, Ernst R; Frank, Richard G

2008-01-01

Previous research has shown that a manufacturer's promotional strategy for a brand name drug is typically affected by generic entry. However, little is known about how newer strategies to extend patent life, including product reformulation introduction or obtaining approval to market for additional clinical indications, influence promotion. To examine the relationships among promotional expenditures, generic entry, reformulation entry and new indication approval. We used quarterly data on national product-level promotional spending (including expenditures for physician detailing and direct-to-consumer advertising [DTCA], and the retail value of free samples distributed in physician offices) for selective serotonin reuptake inhibitors (SSRIs) over the period 1997-2004. We estimated econometric models of detailing, DTCA and total quarterly promotional expenditures as a function of the timing of generic entry, entry of new product formulations and US FDA approval for new clinical indications for existing medications in the SSRI class. Expenditures by pharmaceutical manufacturers for promotion of antidepressant medications was the main outcome measure. Over the period 1997-2004, there was considerable variation in the composition of promotional expenditures across the SSRIs. Promotional expenditures for the original brand molecule decreased dramatically when a reformulation of the molecule was introduced. Promotional spending (both total and detailing alone) for a specific molecule was generally lower after generic entry than before, although the effect of generic entry on promotional spending appears to be closely linked with the choice of product reformulation strategy pursued by the manufacturer. Detailing expenditures for Paxil were increased after the manufacturer received FDA approval to market the drug for generalized anxiety disorder (GAD), while the likelihood of DTCA outlays for the drug was not changed. In contrast, FDA approval to market Paxil and Zoloft for social anxiety disorder (SAD) did not affect the manufacturers' detailing expenditures but did result in a greater likelihood of DTCA outlays. The introduction of new product formulations appears to be a common strategy for attempting to extend market exclusivity for medications facing impending generic entry. Manufacturers who introduced a reformulation before generic entry shifted most promotion dollars from the original brand to the reformulation long before generic entry, and in some cases manufacturers appeared to target a particular promotion type for a given indication. Given the significant impact that pharmaceutical promotion has on demand for prescription drugs in the US, these findings have important implications for prescription drug spending and public health.

Maximizing the information learned from finite data selects a simple model

NASA Astrophysics Data System (ADS)

Mattingly, Henry H.; Transtrum, Mark K.; Abbott, Michael C.; Machta, Benjamin B.

2018-02-01

We use the language of uninformative Bayesian prior choice to study the selection of appropriately simple effective models. We advocate for the prior which maximizes the mutual information between parameters and predictions, learning as much as possible from limited data. When many parameters are poorly constrained by the available data, we find that this prior puts weight only on boundaries of the parameter space. Thus, it selects a lower-dimensional effective theory in a principled way, ignoring irrelevant parameter directions. In the limit where there are sufficient data to tightly constrain any number of parameters, this reduces to the Jeffreys prior. However, we argue that this limit is pathological when applied to the hyperribbon parameter manifolds generic in science, because it leads to dramatic dependence on effects invisible to experiment.

Geographic information system/watershed model interface

USGS Publications Warehouse

Fisher, Gary T.

1989-01-01

Geographic information systems allow for the interactive analysis of spatial data related to water-resources investigations. A conceptual design for an interface between a geographic information system and a watershed model includes functions for the estimation of model parameter values. Design criteria include ease of use, minimal equipment requirements, a generic data-base management system, and use of a macro language. An application is demonstrated for a 90.1-square-kilometer subbasin of the Patuxent River near Unity, Maryland, that performs automated derivation of watershed parameters for hydrologic modeling.

Dynamics of oscillating relativistic tori around Kerr black holes

NASA Astrophysics Data System (ADS)

Zanotti, Olindo; Font, José A.; Rezzolla, Luciano; Montero, Pedro J.

2005-02-01

We present a comprehensive numerical study of the dynamics of relativistic axisymmetric accretion tori with a power-law distribution of specific angular momentum orbiting in the background space-time of a Kerr black hole. By combining general relativistic hydrodynamics simulations with a linear perturbative approach we investigate the main dynamical properties of these objects over a large parameter space. The astrophysical implications of our results extend and improve two interesting results that have been recently reported in the literature. First, the induced quasi-periodic variation of the mass quadrupole moment makes relativistic tori of nuclear matter densities, as those formed during the last stages of binary neutron star mergers, promising sources of gravitational radiation, potentially detectable by interferometric instruments. Secondly, p-mode oscillations in relativistic tori of low rest-mass densities could be used to explain high-frequency quasi-periodic oscillations observed in X-ray binaries containing a black hole candidate under conditions more generic than those considered so far.

Application and performance of an ML-EM algorithm in NEXT

NASA Astrophysics Data System (ADS)

Simón, A.; Lerche, C.; Monrabal, F.; Gómez-Cadenas, J. J.; Álvarez, V.; Azevedo, C. D. R.; Benlloch-Rodríguez, J. M.; Borges, F. I. G. M.; Botas, A.; Cárcel, S.; Carrión, J. V.; Cebrián, S.; Conde, C. A. N.; Díaz, J.; Diesburg, M.; Escada, J.; Esteve, R.; Felkai, R.; Fernandes, L. M. P.; Ferrario, P.; Ferreira, A. L.; Freitas, E. D. C.; Goldschmidt, A.; González-Díaz, D.; Gutiérrez, R. M.; Hauptman, J.; Henriques, C. A. O.; Hernandez, A. I.; Hernando Morata, J. A.; Herrero, V.; Jones, B. J. P.; Labarga, L.; Laing, A.; Lebrun, P.; Liubarsky, I.; López-March, N.; Losada, M.; Martín-Albo, J.; Martínez-Lema, G.; Martínez, A.; McDonald, A. D.; Monteiro, C. M. B.; Mora, F. J.; Moutinho, L. M.; Muñoz Vidal, J.; Musti, M.; Nebot-Guinot, M.; Novella, P.; Nygren, D. R.; Palmeiro, B.; Para, A.; Pérez, J.; Querol, M.; Renner, J.; Ripoll, L.; Rodríguez, J.; Rogers, L.; Santos, F. P.; dos Santos, J. M. F.; Sofka, C.; Sorel, M.; Stiegler, T.; Toledo, J. F.; Torrent, J.; Tsamalaidze, Z.; Veloso, J. F. C. A.; Webb, R.; White, J. T.; Yahlali, N.

2017-08-01

The goal of the NEXT experiment is the observation of neutrinoless double beta decay in 136Xe using a gaseous xenon TPC with electroluminescent amplification and specialized photodetector arrays for calorimetry and tracking. The NEXT Collaboration is exploring a number of reconstruction algorithms to exploit the full potential of the detector. This paper describes one of them: the Maximum Likelihood Expectation Maximization (ML-EM) method, a generic iterative algorithm to find maximum-likelihood estimates of parameters that has been applied to solve many different types of complex inverse problems. In particular, we discuss a bi-dimensional version of the method in which the photosensor signals integrated over time are used to reconstruct a transverse projection of the event. First results show that, when applied to detector simulation data, the algorithm achieves nearly optimal energy resolution (better than 0.5% FWHM at the Q value of 136Xe) for events distributed over the full active volume of the TPC.

Sensory Optimization by Stochastic Tuning

PubMed Central

Jurica, Peter; Gepshtein, Sergei; Tyukin, Ivan; van Leeuwen, Cees

2013-01-01

Individually, visual neurons are each selective for several aspects of stimulation, such as stimulus location, frequency content, and speed. Collectively, the neurons implement the visual system’s preferential sensitivity to some stimuli over others, manifested in behavioral sensitivity functions. We ask how the individual neurons are coordinated to optimize visual sensitivity. We model synaptic plasticity in a generic neural circuit, and find that stochastic changes in strengths of synaptic connections entail fluctuations in parameters of neural receptive fields. The fluctuations correlate with uncertainty of sensory measurement in individual neurons: the higher the uncertainty the larger the amplitude of fluctuation. We show that this simple relationship is sufficient for the stochastic fluctuations to steer sensitivities of neurons toward a characteristic distribution, from which follows a sensitivity function observed in human psychophysics, and which is predicted by a theory of optimal allocation of receptive fields. The optimal allocation arises in our simulations without supervision or feedback about system performance and independently of coupling between neurons, making the system highly adaptive and sensitive to prevailing stimulation. PMID:24219849

Searching for efficient Markov chain Monte Carlo proposal kernels

PubMed Central

Yang, Ziheng; Rodríguez, Carlos E.

2013-01-01

Markov chain Monte Carlo (MCMC) or the Metropolis–Hastings algorithm is a simulation algorithm that has made modern Bayesian statistical inference possible. Nevertheless, the efficiency of different Metropolis–Hastings proposal kernels has rarely been studied except for the Gaussian proposal. Here we propose a unique class of Bactrian kernels, which avoid proposing values that are very close to the current value, and compare their efficiency with a number of proposals for simulating different target distributions, with efficiency measured by the asymptotic variance of a parameter estimate. The uniform kernel is found to be more efficient than the Gaussian kernel, whereas the Bactrian kernel is even better. When optimal scales are used for both, the Bactrian kernel is at least 50% more efficient than the Gaussian. Implementation in a Bayesian program for molecular clock dating confirms the general applicability of our results to generic MCMC algorithms. Our results refute a previous claim that all proposals had nearly identical performance and will prompt further research into efficient MCMC proposals. PMID:24218600

Multi-variate joint PDF for non-Gaussianities: exact formulation and generic approximations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Verde, Licia; Jimenez, Raul; Alvarez-Gaume, Luis

2013-06-01

We provide an exact expression for the multi-variate joint probability distribution function of non-Gaussian fields primordially arising from local transformations of a Gaussian field. This kind of non-Gaussianity is generated in many models of inflation. We apply our expression to the non-Gaussianity estimation from Cosmic Microwave Background maps and the halo mass function where we obtain analytical expressions. We also provide analytic approximations and their range of validity. For the Cosmic Microwave Background we give a fast way to compute the PDF which is valid up to more than 7σ for f{sub NL} values (both true and sampled) not ruledmore » out by current observations, which consists of expressing the PDF as a combination of bispectrum and trispectrum of the temperature maps. The resulting expression is valid for any kind of non-Gaussianity and is not limited to the local type. The above results may serve as the basis for a fully Bayesian analysis of the non-Gaussianity parameter.« less

Sensitivity analysis of helicopter IMC decelerating steep approach and landing performance to navigation system parameters

NASA Technical Reports Server (NTRS)

Karmali, M. S.; Phatak, A. V.

1982-01-01

Results of a study to investigate, by means of a computer simulation, the performance sensitivity of helicopter IMC DSAL operations as a function of navigation system parameters are presented. A mathematical model representing generically a navigation system is formulated. The scenario simulated consists of a straight in helicopter approach to landing along a 6 deg glideslope. The deceleration magnitude chosen is 03g. The navigation model parameters are varied and the statistics of the total system errors (TSE) computed. These statistics are used to determine the critical navigation system parameters that affect the performance of the closed-loop navigation, guidance and control system of a UH-1H helicopter.

The generic danger and the idiosyncratic support

NASA Astrophysics Data System (ADS)

Temme, Arnaud; Nijp, Jelmer; van der Meij, Marijn; Samia, Jalal; Masselink, Rens

2016-04-01

This contribution argues two main points. First, that generic landscapes used in some modelling studies sometimes have properties or cause simulation results that are unrealistic. Such initially flat or straight-sloped landscapes, sometimes with minor random perturbations, e.g. form the backdrop for ecological simulations of vegetation growth and competition that predict catastrophic shifts. Exploratory results for semi-arid systems suggest that the results based on these generic landscapes are end-members from a distribution of results, rather than an unbiased, typical outcome. Apparently, the desire to avoid idiosyncrasy has unintended consequences. Second, we argue and illustrate that in fact new insights often come from close inspection of idiosyncratic case studies. Our examples from landslide systems, connectivity and soil formation show how a central role for the case study - either in empirical work or to provide model targets - has advanced our understanding. Both points contribute to the conclusion that it is dangerous to forget about annoying, small-scale, idiosyncratic and, indeed, perhaps bad-ass case studies in Earth Sciences.

Savannah River Site generic data base development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanton, C.H.; Eide, S.A.

This report describes the results of a project to improve the generic component failure data base for the Savannah River Site (SRS). A representative list of components and failure modes for SRS risk models was generated by reviewing existing safety analyses and component failure data bases and from suggestions from SRS safety analysts. Then sources of data or failure rate estimates were identified and reviewed for applicability. A major source of information was the Nuclear Computerized Library for Assessing Reactor Reliability, or NUCLARR. This source includes an extensive collection of failure data and failure rate estimates for commercial nuclear powermore » plants. A recent Idaho National Engineering Laboratory report on failure data from the Idaho Chemical Processing Plant was also reviewed. From these and other recent sources, failure data and failure rate estimates were collected for the components and failure modes of interest. This information was aggregated to obtain a recommended generic failure rate distribution (mean and error factor) for each component failure mode.« less

Buckling behavior of long symmetrically laminated plates subjected to combined loadings

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

1992-01-01

A parametric study is presented of the buckling behavior of infinitely long, symmetrically laminated anisotropic plates subjected to combined loadings. The loading conditions considered are axial tension and compression transverse tension and compression, and shear. Results obtained using a special-purpose analysis, well-suited for parametric studies, are presented for clamped and simply supported plates. Moreover, results are presented for some common laminate constructions, and generic buckling design charts are presented for a wide range of parameters. The generic design charts are presented in terms of useful nondimensional parameters, and the dependence of the nondimensional parameters on laminate fiber orientation, stacking sequence, and material properties is discussed. An important finding of the study is that the effects of anisotropy are much more pronounced in shear-loaded plates than in compression-loaded plates. In addition, the effects of anisotropy on plates subjected to combined loadings are generally manifested as a phase shift of self-similar buckling interaction curves. A practical application of this phase shift is that the buckling resistance of long plates can be improved by applying a shear loading with a specific orientation. In all cases considered in the study, the buckling coefficients of infinitely long plates are found to be independent of the bending stiffness ratio (D sub 11/D sub 22)(1/4).

Buckling behavior of long symmetrically laminated plates subjected to combined loads

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

1992-01-01

A parametric study of the buckling behavior of infinitely long symmetrically laminated anisotropic plates subjected to combined loadings is presented. The loading conditions considered are axial tension and compression, transverse tension and compression, and shear. Results obtained using a special purpose analysis, well suited for parametric studies are presented for clamped and simply supported plates. Moreover, results are presented for some common laminate constructions, and generic buckling design charts are presented for a wide range of parameters. The generic design charts are presented in terms of useful nondimensional parameters, and dependence of the nondimensional parameters on laminate fiber orientation, stacking sequence, and material properties is discussed. An important finding of the study is that the effects of anisotropy are much more pronounced in shear-loaded plates than in compression loaded plates. In addition, the effects of anisotropy on plates subjected to combined loadings are generally manifested as a phase shift of self-similar buckling interaction curves. A practical application of this phase shift is the buckling resistance of long plates can be improved by applying a shear loading with a specific orientation. In all cases considered, it is found that the buckling coefficients of infinitely long plates are independent of the bending stiffness ratio (D sub 11/D sub 22) sup 1/4.

Distributed information system architecture for Primary Health Care.

PubMed

Grammatikou, M; Stamatelopoulos, F; Maglaris, B

2000-01-01

We present a distributed architectural framework for Primary Health Care (PHC) Centres. Distribution is handled through the introduction of the Roaming Electronic Health Care Record (R-EHCR) and the use of local caching and incremental update of a global index. The proposed architecture is designed to accommodate a specific PHC workflow model. Finally, we discuss a pilot implementation in progress, which is based on CORBA and web-based user interfaces. However, the conceptual architecture is generic and open to other middleware approaches like the DHE or HL7.

Reinventing the Training Business.

ERIC Educational Resources Information Center

Forman, David C.

2003-01-01

Discusses steps that companies who develop and distribute technology-based training products need to take in order to be more successful, including focusing on the customer; moving away from large, generic courseware libraries; better pricing schemes; commitment to produce learning outcomes; and partnerships with clients to produce documented…

Distinguishability of generic quantum states

NASA Astrophysics Data System (ADS)

Puchała, Zbigniew; Pawela, Łukasz; Życzkowski, Karol

2016-06-01

Properties of random mixed states of dimension N distributed uniformly with respect to the Hilbert-Schmidt measure are investigated. We show that for large N , due to the concentration of measure, the trace distance between two random states tends to a fixed number D ˜=1 /4 +1 /π , which yields the Helstrom bound on their distinguishability. To arrive at this result, we apply free random calculus and derive the symmetrized Marchenko-Pastur distribution, which is shown to describe numerical data for the model of coupled quantum kicked tops. Asymptotic value for the root fidelity between two random states, √{F }=3/4 , can serve as a universal reference value for further theoretical and experimental studies. Analogous results for quantum relative entropy and Chernoff quantity provide other bounds on the distinguishablity of both states in a multiple measurement setup due to the quantum Sanov theorem. We study also mean entropy of coherence of random pure and mixed states and entanglement of a generic mixed state of a bipartite system.

1 / f α noise and generalized diffusion in random Heisenberg spin systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, Kartiek; Demler, Eugene; Martin, Ivar

2015-11-01

We study the “flux-noise” spectrum of random-bond quantum Heisenberg spin systems using a real-space renormalization group (RSRG) procedure that accounts for both the renormalization of the system Hamiltonian and of a generic probe that measures the noise. For spin chains, we find that the dynamical structure factor Sq (f ), at finite wave vector q, exhibits a power-law behavior both at high and low frequencies f , with exponents that are connected to one another and to an anomalous dynamical exponent through relations that differ at T = 0 and T =∞. The low-frequency power-law behavior of the structure factormore » is inherited by any generic probe with a finite bandwidth and is of the form 1/f α with 0.5 < α < 1. An analytical calculation of the structure factor, assuming a limiting distribution of the RG flow parameters (spin size, length, bond strength) confirms numerical findings.More generally, we demonstrate that this form of the structure factor, at high temperatures, is a manifestation of anomalous diffusionwhich directly follows from a generalized spin-diffusion propagator.We also argue that 1/f -noise is intimately connected to many-body-localization at finite temperatures. In two dimensions, the RG procedure is less reliable; however, it becomes convergent for quasi-one-dimensional geometries where we find that one-dimensional 1/f α behavior is recovered at low frequencies; the latter configurations are likely representative of paramagnetic spin networks that produce 1/f α noise in SQUIDs.« less

ACCELERATION OF THERMAL PROTONS BY GENERIC PHENOMENOLOGICAL MECHANISMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petrosian, Vahé; Kang, Byungwoo, E-mail: vahep@stanford.edu, E-mail: redcrux8@stanford.edu

2015-11-01

We investigate heating and acceleration of protons from a thermal gas with a generic diffusion and acceleration model, and subject to Coulomb scattering and energy loss, as was done by Petrosian and East for electrons. As protons gain energy their loss to electrons becomes important. Thus, we need to solve the coupled proton–electron kinetic equation. We numerically solve the coupled Fokker–Planck equations and compute the time evolution of the spectra of both particles. We show that this can lead to a quasi-thermal component plus a high-energy nonthermal tail. We determine the evolution of the nonthermal tail and the quasi-thermal component.more » The results may be used to explore the possibility of inverse bremsstrahlung radiation as a source of hard X-ray emissions from hot sources such as solar flares, accretion disk coronas, and the intracluster medium of galaxy clusters. We find that the emergence of nonthermal protons is accompanied by excessive heating of the entire plasma, unless the turbulence needed for scattering and acceleration is steeper than Kolmogorov and the acceleration parameters, the duration of the acceleration, and/or the initial distributions are significantly fine-tuned. These results severely constrain the feasibility of the nonthermal inverse bremsstrahlung process producing hard X-ray emissions. However, the nonthermal tail may be the seed particles for further re-acceleration to relativistic energies, say by a shock. In the Appendix we present some tests of the integrity of the algorithm used and present a new formula for the energy loss rate due to inelastic proton–proton interactions.« less

Universal dynamical properties preclude standard clustering in a large class of biochemical data.

PubMed

Gomez, Florian; Stoop, Ralph L; Stoop, Ruedi

2014-09-01

Clustering of chemical and biochemical data based on observed features is a central cognitive step in the analysis of chemical substances, in particular in combinatorial chemistry, or of complex biochemical reaction networks. Often, for reasons unknown to the researcher, this step produces disappointing results. Once the sources of the problem are known, improved clustering methods might revitalize the statistical approach of compound and reaction search and analysis. Here, we present a generic mechanism that may be at the origin of many clustering difficulties. The variety of dynamical behaviors that can be exhibited by complex biochemical reactions on variation of the system parameters are fundamental system fingerprints. In parameter space, shrimp-like or swallow-tail structures separate parameter sets that lead to stable periodic dynamical behavior from those leading to irregular behavior. We work out the genericity of this phenomenon and demonstrate novel examples for their occurrence in realistic models of biophysics. Although we elucidate the phenomenon by considering the emergence of periodicity in dependence on system parameters in a low-dimensional parameter space, the conclusions from our simple setting are shown to continue to be valid for features in a higher-dimensional feature space, as long as the feature-generating mechanism is not too extreme and the dimension of this space is not too high compared with the amount of available data. For online versions of super-paramagnetic clustering see http://stoop.ini.uzh.ch/research/clustering. Supplementary data are available at Bioinformatics online. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Towards a generic procedure for the detection of relevant contaminants from waste electric and electronic equipment (WEEE) in plastic food-contact materials: a review and selection of key parameters.

PubMed

Puype, Franky; Samsonek, Jiří; Vilímková, Věra; Kopečková, Šárka; Ratiborská, Andrea; Knoop, Jan; Egelkraut-Holtus, Marion; Ortlieb, Markus; Oppermann, Uwe

2017-10-01

Recently, traces of brominated flame retardants (BFRs) have been detected in black plastic food-contact materials (FCMs), indicating the presence of recycled plastics, mainly coming from waste electric and electronic equipment (WEEE) as BFRs are one of the main additives in electric applications. In order to evaluate efficiently and preliminary in situ the presence of WEEE in plastic FCMs, a generic procedure for the evaluation of WEEE presence in plastic FCMs by using defined parameters having each an associated importance level has been proposed. This can be achieved by combining parameters like overall bromine (Br) and antimony (Sb) content; additive and reactive BFR, rare earth element (REE) and WEEE-relevant elemental content and additionally polymer purity. In most of the cases, the WEEE contamination could be confirmed by combining X-ray fluorescence (XRF) spectrometry and thermal desorption/pyrolysis gas chromatography-mass spectrometry (GC-MS) at first. The Sb and REE content did not give a full confirmation as to the source of contamination, however for Sb the opposite counts: Sb was joined with elevated Br signals. Therefore, Br at first followed by Sb were used as WEEE precursors as both elements are used as synergetic flame-retardant systems. WEEE-specific REEs could be used for small WEEE (sWEEE) confirmation; however, this parameter should be interpreted with care. The polymer purity by Fourier-transform infrared spectrometer (FTIR) and pyrolysis GC-MS in many cases could not confirm WEEE-specific contamination; however, it can be used for purity measurements and for the suspicion of the usage of recycled fractions (WEEE and non-WEEE) as a third-line confirmation. To the best of our knowledge, the addition of WEEE waste to plastic FCMs is illegal; however, due to lack on screening mechanisms, there is still the breakthrough of such articles onto the market, and, therefore, our generic procedure enables the quick and effective screening of suspicious samples.

A Telemetry Browser Built with Java Components

NASA Astrophysics Data System (ADS)

Poupart, E.

In the context of CNES balloon scientific campaigns and telemetry survey field, a generic telemetry processing product, called TelemetryBrowser in the following, was developed reusing COTS, Java Components for most of them. Connection between those components relies on a software architecture based on parameter producers and parameter consumers. The first one transmit parameter values to the second one which has registered to it. All of those producers and consumers can be spread over the network thanks to Corba, and over every kind of workstation thanks to Java. This gives a very powerful mean to adapt to constraints like network bandwidth, or workstations processing or memory. It's also very useful to display and correlate at the same time information coming from multiple and various sources. An important point of this architecture is that the coupling between parameter producers and parameter consumers is reduced to the minimum and that transmission of information on the network is made asynchronously. So, if a parameter consumer goes down or runs slowly, there is no consequence on the other consumers, because producers don't wait for their consumers to finish their data processing before sending it to other consumers. An other interesting point is that parameter producers, also called TelemetryServers in the following are generated nearly automatically starting from a telemetry description using Flavori component. Keywords Java components, Corba, distributed application, OpenORBii, software reuse, COTS, Internet, Flavor. i Flavor (Formal Language for Audio-Visual Object Representation) is an object-oriented media representation language being developed at Columbia University. It is designed as an extension of Java and C++ and simplifies the development of applications that involve a significant media processing component (encoding, decoding, editing, manipulation, etc.) by providing bitstream representation semantics. (flavor.sourceforge.net) ii OpenORB provides a Java implementation of the OMG Corba 2.4.2 specification (openorb.sourceforge.net) 1/16

A cost-utility analysis of drug treatments in patients with HBeAg-positive chronic hepatitis B in Thailand

PubMed Central

2014-01-01

Background Only lamivudine has been included for patients with chronic hepatitis B (CHB) in the National List of Essential Drugs (NLED), a pharmaceutical reimbursement list in Thailand. There have also been no economic evaluation studies of CHB drug treatments conducted in Thailand yet. In order to fill this gap in policy research, the objective of this study was to compare the cost-utility of each drug therapy (Figure 1) with palliative care in patients with HBeAg-positive CHB. Methods A cost-utility analysis using an economic evaluation model was performed to compare each drug treatment for HBeAg-positive CHB patients. A Markov model was used to estimate the relevant costs and health outcomes during a lifetime horizon based on a societal perspective. Direct medical costs, direct non-medical costs, and indirect costs were included, and health outcomes were denoted in life years (LYs) and quality-adjusted life years (QALYs). The results were presented as an incremental cost effectiveness ratio (ICER) in Thai baht (THB) per LY or QALY gained. One-way sensitivity and probabilistic sensitivity analyses were applied to investigate the effects of model parameter uncertainties. Results The ICER values of providing generic lamivudine with the addition of tenofovir when drug resistance occurred, generic lamivudine with the addition of tenofovir based on the road map guideline, and tenofovir monotherapy were -14,000 (USD -467), -8,000 (USD -267) , and -5,000 (USD -167) THB per QALY gained, respectively. However, when taking into account all parameter uncertainties in the model, providing generic lamivudine with the addition of tenofovir when drug resistance occurred (78% and 75%) and tenofovir monotherapy (18% and 24%) would yield higher probabilities of being cost-effective at the societal willingness to pay thresholds of 100,000 (USD 3,333) and 300,000 (USD 10,000) THB per QALY gained in Thailand, respectively. Conclusions Based on the policy recommendations from this study, the Thai government decided to include tenofovir into the NLED in addition to generic lamivudine which is already on the list. Moreover, the results have shown that the preferred treatment regimen involves using generic lamivudine as the first-line drug with tenofovir added if drug resistance occurs in HBeAg-positive CHB patients. PMID:24731689

Vortex lattices and defect-mediated viscosity reduction in active liquids

NASA Astrophysics Data System (ADS)

Slomka, Jonasz; Dunkel, Jorn

2016-11-01

Generic pattern-formation and viscosity-reduction mechanisms in active fluids are investigated using a generalized Navier-Stokes model that captures the experimentally observed bulk vortex dynamics in microbial suspensions. We present exact analytical solutions including stress-free vortex lattices and introduce a computational framework that allows the efficient treatment of previously intractable higher-order shear boundary conditions. Large-scale parameter scans identify the conditions for spontaneous flow symmetry breaking, defect-mediated low-viscosity phases and negative-viscosity states amenable to energy harvesting in confined suspensions. The theory uses only generic assumptions about the symmetries and long-wavelength structure of active stress tensors, suggesting that inviscid phases may be achievable in a broad class of non-equilibrium fluids by tuning confinement geometry and pattern scale selection.

Noisy Oscillations in the Actin Cytoskeleton of Chemotactic Amoeba.

PubMed

Negrete, Jose; Pumir, Alain; Hsu, Hsin-Fang; Westendorf, Christian; Tarantola, Marco; Beta, Carsten; Bodenschatz, Eberhard

2016-09-30

Biological systems with their complex biochemical networks are known to be intrinsically noisy. Here we investigate the dynamics of actin polymerization of amoeboid cells, which are close to the onset of oscillations. We show that the large phenotypic variability in the polymerization dynamics can be accurately captured by a generic nonlinear oscillator model in the presence of noise. We determine the relative role of the noise with a single dimensionless, experimentally accessible parameter, thus providing a quantitative description of the variability in a population of cells. Our approach, which rests on a generic description of a system close to a Hopf bifurcation and includes the effect of noise, can characterize the dynamics of a large class of noisy systems close to an oscillatory instability.

Origami Multistability: From Single Vertices to Metasheets

NASA Astrophysics Data System (ADS)

Waitukaitis, Scott; Menaut, Rémi; Chen, Bryan Gin-ge; van Hecke, Martin

2015-02-01

We show that the simplest building blocks of origami-based materials—rigid, degree-four vertices—are generically multistable. The existence of two distinct branches of folding motion emerging from the flat state suggests at least bistability, but we show how nonlinearities in the folding motions allow generic vertex geometries to have as many as five stable states. In special geometries with collinear folds and symmetry, more branches emerge leading to as many as six stable states. Tuning the fold energy parameters, we show how monostability is also possible. Finally, we show how to program the stability features of a single vertex into a periodic fold tessellation. The resulting metasheets provide a previously unanticipated functionality—tunable and switchable shape and size via multistability.

Dual little strings and their partition functions

NASA Astrophysics Data System (ADS)

Bastian, Brice; Hohenegger, Stefan; Iqbal, Amer; Rey, Soo-Jong

2018-05-01

We study the topological string partition function of a class of toric, double elliptically fibered Calabi-Yau threefolds XN ,M at a generic point in the Kähler moduli space. These manifolds engineer little string theories in five dimensions or lower and are dual to stacks of M5-branes probing a transverse orbifold singularity. Using the refined topological vertex formalism, we explicitly calculate a generic building block which allows us to compute the topological string partition function of XN ,M as a series expansion in different Kähler parameters. Using this result, we give further explicit proof for a duality found previously in the literature, which relates XN ,M˜XN',M' for N M =N'M' and gcd (N ,M )=gcd (N',M') .

Calculation of the attenuation and phase displacement per unit of length due to rain composed of ellipsoidal drops

NASA Technical Reports Server (NTRS)

Maggiori, D.

1981-01-01

All of the phenomena which influence the propagation of radiowaves at frequencies above 10 GHz (attenuation, depolarization, scintillation) can by intensified by parameters directly derived from a solution of individual scatter, naturally in addition to be meteorological elements which characterize the physical medium. The diffusion caused by rainy precipitation was studied using Mie's algorithm for rain composed of spherical drops, and Oguchi's algorithm for rain composed of drops in an ellipsoidal form with axes of rotational symmetry arrange along the vertical line of a generic reference point. Specific phase displacement and attenuation along the principal planes, propagation of radiowaves in generic polarization, and propagation with inclined axes are also considered.

Noisy Oscillations in the Actin Cytoskeleton of Chemotactic Amoeba

NASA Astrophysics Data System (ADS)

Negrete, Jose; Pumir, Alain; Hsu, Hsin-Fang; Westendorf, Christian; Tarantola, Marco; Beta, Carsten; Bodenschatz, Eberhard

2016-09-01

Biological systems with their complex biochemical networks are known to be intrinsically noisy. Here we investigate the dynamics of actin polymerization of amoeboid cells, which are close to the onset of oscillations. We show that the large phenotypic variability in the polymerization dynamics can be accurately captured by a generic nonlinear oscillator model in the presence of noise. We determine the relative role of the noise with a single dimensionless, experimentally accessible parameter, thus providing a quantitative description of the variability in a population of cells. Our approach, which rests on a generic description of a system close to a Hopf bifurcation and includes the effect of noise, can characterize the dynamics of a large class of noisy systems close to an oscillatory instability.

A noncompact Weyl-Einstein-Yang-Mills model: A semiclassical quantum gravity

NASA Astrophysics Data System (ADS)

Dengiz, Suat

2017-08-01

We construct and study perturbative unitarity (i.e., ghost and tachyon analysis) of a 3 + 1-dimensional noncompact Weyl-Einstein-Yang-Mills model. The model describes a local noncompact Weyl's scale plus SU(N) phase invariant Higgs-like field,conformally coupled to a generic Weyl-invariant dynamical background. Here, the Higgs-like sector generates the Weyl's conformal invariance of system. The action does not admit any dimensionful parameter and genuine presence of de Sitter vacuum spontaneously breaks the noncompact gauge symmetry in an analogous manner to the Standard Model Higgs mechanism. As to flat spacetime, the dimensionful parameter is generated within the dimensional transmutation in quantum field theories, and thus the symmetry is radiatively broken through the one-loop Effective Coleman-Weinberg potential. We show that the mere expectation of reducing to Einstein's gravity in the broken phases forbids anti-de Sitter space to be its stable vacua. The model is unitary in de Sitter and flat vacua around which a massless graviton, N2 - 1 massless scalar bosons, N massless Dirac fermions, N2 - 1 Proca-type massive Abelian and non-Abelian vector bosons are generically propagated.

Calibrating the stress-time curve of a combined finite-discrete element method to a Split Hopkinson Pressure Bar experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Osthus, Dave; Godinez, Humberto C.; Rougier, Esteban

We presenmore » t a generic method for automatically calibrating a computer code to an experiment, with uncertainty, for a given “training” set of computer code runs. The calibration technique is general and probabilistic, meaning the calibration uncertainty is represented in the form of a probability distribution. We demonstrate the calibration method by calibrating a combined Finite-Discrete Element Method (FDEM) to a Split Hopkinson Pressure Bar (SHPB) experiment with a granite sample. The probabilistic calibration method combines runs of a FDEM computer simulation for a range of “training” settings and experimental uncertainty to develop a statistical emulator. The process allows for calibration of input parameters and produces output quantities with uncertainty estimates for settings where simulation results are desired. Input calibration and FDEM fitted results are presented. We find that the maximum shear strength σ t max and to a lesser extent maximum tensile strength σ n max govern the behavior of the stress-time curve before and around the peak, while the specific energy in Mode II (shear) E t largely governs the post-peak behavior of the stress-time curve. Good agreement is found between the calibrated FDEM and the SHPB experiment. Interestingly, we find the SHPB experiment to be rather uninformative for calibrating the softening-curve shape parameters (a, b, and c). This work stands as a successful demonstration of how a general probabilistic calibration framework can automatically calibrate FDEM parameters to an experiment.« less

Calibrating the stress-time curve of a combined finite-discrete element method to a Split Hopkinson Pressure Bar experiment

DOE PAGES

Osthus, Dave; Godinez, Humberto C.; Rougier, Esteban; ...

2018-05-01

We presenmore » t a generic method for automatically calibrating a computer code to an experiment, with uncertainty, for a given “training” set of computer code runs. The calibration technique is general and probabilistic, meaning the calibration uncertainty is represented in the form of a probability distribution. We demonstrate the calibration method by calibrating a combined Finite-Discrete Element Method (FDEM) to a Split Hopkinson Pressure Bar (SHPB) experiment with a granite sample. The probabilistic calibration method combines runs of a FDEM computer simulation for a range of “training” settings and experimental uncertainty to develop a statistical emulator. The process allows for calibration of input parameters and produces output quantities with uncertainty estimates for settings where simulation results are desired. Input calibration and FDEM fitted results are presented. We find that the maximum shear strength σ t max and to a lesser extent maximum tensile strength σ n max govern the behavior of the stress-time curve before and around the peak, while the specific energy in Mode II (shear) E t largely governs the post-peak behavior of the stress-time curve. Good agreement is found between the calibrated FDEM and the SHPB experiment. Interestingly, we find the SHPB experiment to be rather uninformative for calibrating the softening-curve shape parameters (a, b, and c). This work stands as a successful demonstration of how a general probabilistic calibration framework can automatically calibrate FDEM parameters to an experiment.« less

Towards quantifying uncertainty in Greenland's contribution to 21st century sea-level rise

NASA Astrophysics Data System (ADS)

Perego, M.; Tezaur, I.; Price, S. F.; Jakeman, J.; Eldred, M.; Salinger, A.; Hoffman, M. J.

2015-12-01

We present recent work towards developing a methodology for quantifying uncertainty in Greenland's 21st century contribution to sea-level rise. While we focus on uncertainties associated with the optimization and calibration of the basal sliding parameter field, the methodology is largely generic and could be applied to other (or multiple) sets of uncertain model parameter fields. The first step in the workflow is the solution of a large-scale, deterministic inverse problem, which minimizes the mismatch between observed and computed surface velocities by optimizing the two-dimensional coefficient field in a linear-friction sliding law. We then expand the deviation in this coefficient field from its estimated "mean" state using a reduced basis of Karhunen-Loeve Expansion (KLE) vectors. A Bayesian calibration is used to determine the optimal coefficient values for this expansion. The prior for the Bayesian calibration can be computed using the Hessian of the deterministic inversion or using an exponential covariance kernel. The posterior distribution is then obtained using Markov Chain Monte Carlo run on an emulator of the forward model. Finally, the uncertainty in the modeled sea-level rise is obtained by performing an ensemble of forward propagation runs. We present and discuss preliminary results obtained using a moderate-resolution model of the Greenland Ice sheet. As demonstrated in previous work, the primary difficulty in applying the complete workflow to realistic, high-resolution problems is that the effective dimension of the parameter space is very large.

Benchmark Problems for Spacecraft Formation Flying Missions

NASA Technical Reports Server (NTRS)

Carpenter, J. Russell; Leitner, Jesse A.; Burns, Richard D.; Folta, David C.

2003-01-01

To provide high-level focus to distributed space system flight dynamics and control research, several benchmark problems are suggested. These problems are not specific to any current or proposed mission, but instead are intended to capture high-level features that would be generic to many similar missions.

Modeling the isotopic evolution of snowpack and snowmelt: Testing a spatially distributed parsimonious approach.

PubMed

Ala-Aho, Pertti; Tetzlaff, Doerthe; McNamara, James P; Laudon, Hjalmar; Kormos, Patrick; Soulsby, Chris

2017-07-01

Use of stable water isotopes has become increasingly popular in quantifying water flow paths and travel times in hydrological systems using tracer-aided modeling. In snow-influenced catchments, snowmelt produces a traceable isotopic signal, which differs from original snowfall isotopic composition because of isotopic fractionation in the snowpack. These fractionation processes in snow are relatively well understood, but representing their spatiotemporal variability in tracer-aided studies remains a challenge. We present a novel, parsimonious modeling method to account for the snowpack isotope fractionation and estimate isotope ratios in snowmelt water in a fully spatially distributed manner. Our model introduces two calibration parameters that alone account for the isotopic fractionation caused by sublimation from interception and ground snow storage, and snowmelt fractionation progressively enriching the snowmelt runoff. The isotope routines are linked to a generic process-based snow interception-accumulation-melt model facilitating simulation of spatially distributed snowmelt runoff. We use a synthetic modeling experiment to demonstrate the functionality of the model algorithms in different landscape locations and under different canopy characteristics. We also provide a proof-of-concept model test and successfully reproduce isotopic ratios in snowmelt runoff sampled with snowmelt lysimeters in two long-term experimental catchment with contrasting winter conditions. To our knowledge, the method is the first such tool to allow estimation of the spatially distributed nature of isotopic fractionation in snowpacks and the resulting isotope ratios in snowmelt runoff. The method can thus provide a useful tool for tracer-aided modeling to better understand the integrated nature of flow, mixing, and transport processes in snow-influenced catchments.

Enhanced representation of soil NO emissions in the ...

EPA Pesticide Factsheets

Modeling of soil nitric oxide (NO) emissions is highly uncertain and may misrepresent its spatial and temporal distribution. This study builds upon a recently introduced parameterization to improve the timing and spatial distribution of soil NO emission estimates in the Community Multiscale Air Quality (CMAQ) model. The parameterization considers soil parameters, meteorology, land use, and mineral nitrogen (N) availability to estimate NO emissions. We incorporate daily year-specific fertilizer data from the Environmental Policy Integrated Climate (EPIC) agricultural model to replace the annual generic data of the initial parameterization, and use a 12 km resolution soil biome map over the continental USA. CMAQ modeling for July 2011 shows slight differences in model performance in simulating fine particulate matter and ozone from Interagency Monitoring of Protected Visual Environments (IMPROVE) and Clean Air Status and Trends Network (CASTNET) sites and NO2 columns from Ozone Monitoring Instrument (OMI) satellite retrievals. We also simulate how the change in soil NO emissions scheme affects the expected O3 response to projected emissions reductions. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and

Probabilistic modeling of the fate of Listeria monocytogenes in diced bacon during the manufacturing process.

PubMed

Billoir, Elise; Denis, Jean-Baptiste; Cammeau, Natalie; Cornu, Marie; Zuliani, Veronique

2011-02-01

To assess the impact of the manufacturing process on the fate of Listeria monocytogenes, we built a generic probabilistic model intended to simulate the successive steps in the process. Contamination evolution was modeled in the appropriate units (breasts, dice, and then packaging units through the successive steps in the process). To calibrate the model, parameter values were estimated from industrial data, from the literature, and based on expert opinion. By means of simulations, the model was explored using a baseline calibration and alternative scenarios, in order to assess the impact of changes in the process and of accidental events. The results are reported as contamination distributions and as the probability that the product will be acceptable with regards to the European regulatory safety criterion. Our results are consistent with data provided by industrial partners and highlight that tumbling is a key step for the distribution of the contamination at the end of the process. Process chain models could provide an important added value for risk assessment models that basically consider only the outputs of the process in their risk mitigation strategies. Moreover, a model calibrated to correspond to a specific plant could be used to optimize surveillance. © 2010 Society for Risk Analysis.

Floor vibration evaluations for medical facilities

NASA Astrophysics Data System (ADS)

Himmel, Chad N.

2003-10-01

The structural floor design for new medical facilities is often selected early in the design phase and in renovation projects, the floor structure already exists. Because the floor structure can often have an influence on the location of vibration sensitive medical equipment and facilities, it is becoming necessary to identify the best locations for equipment and facilities early in the design process. Even though specific criteria for vibration-sensitive uses and equipment may not always be available early in the design phase, it should be possible to determine compatible floor structures for planned vibration-sensitive uses by comparing conceptual layouts with generic floor vibration criteria. Relatively simple evaluations of planned uses and generic criteria, combined with on-site vibration and noise measurements early in design phase, can significantly reduce future design problems and expense. Concepts of evaluation procedures and analyses will be presented in this paper. Generic floor vibration criteria and appropriate parameters to control resonant floor vibration and noise will be discussed for typical medical facilities and medical research facilities. Physical, economic, and logistical limitations that affect implementation will be discussed through case studies.

A Generic Nonlinear Aerodynamic Model for Aircraft

NASA Technical Reports Server (NTRS)

Grauer, Jared A.; Morelli, Eugene A.

2014-01-01

A generic model of the aerodynamic coefficients was developed using wind tunnel databases for eight different aircraft and multivariate orthogonal functions. For each database and each coefficient, models were determined using polynomials expanded about the state and control variables, and an othgonalization procedure. A predicted squared-error criterion was used to automatically select the model terms. Modeling terms picked in at least half of the analyses, which totalled 45 terms, were retained to form the generic nonlinear aerodynamic (GNA) model. Least squares was then used to estimate the model parameters and associated uncertainty that best fit the GNA model to each database. Nonlinear flight simulations were used to demonstrate that the GNA model produces accurate trim solutions, local behavior (modal frequencies and damping ratios), and global dynamic behavior (91% accurate state histories and 80% accurate aerodynamic coefficient histories) under large-amplitude excitation. This compact aerodynamics model can be used to decrease on-board memory storage requirements, quickly change conceptual aircraft models, provide smooth analytical functions for control and optimization applications, and facilitate real-time parametric system identification.

Loading relativistic Maxwell distributions in particle simulations

NASA Astrophysics Data System (ADS)

Zenitani, S.

2015-12-01

In order to study energetic plasma phenomena by using particle-in-cell (PIC) and Monte-Carlo simulations, we need to deal with relativistic velocity distributions in these simulations. However, numerical algorithms to deal with relativistic distributions are not well known. In this contribution, we overview basic algorithms to load relativistic Maxwell distributions in PIC and Monte-Carlo simulations. For stationary relativistic Maxwellian, the inverse transform method and the Sobol algorithm are reviewed. To boost particles to obtain relativistic shifted-Maxwellian, two rejection methods are newly proposed in a physically transparent manner. Their acceptance efficiencies are 􏰅50% for generic cases and 100% for symmetric distributions. They can be combined with arbitrary base algorithms.

Measuring effective temperatures in a generalized Gibbs ensemble

NASA Astrophysics Data System (ADS)

Foini, Laura; Gambassi, Andrea; Konik, Robert; Cugliandolo, Leticia F.

2017-05-01

The local physical properties of an isolated quantum statistical system in the stationary state reached long after a quench are generically described by the Gibbs ensemble, which involves only its Hamiltonian and the temperature as a parameter. If the system is instead integrable, additional quantities conserved by the dynamics intervene in the description of the stationary state. The resulting generalized Gibbs ensemble involves a number of temperature-like parameters, the determination of which is practically difficult. Here we argue that in a number of simple models these parameters can be effectively determined by using fluctuation-dissipation relationships between response and correlation functions of natural observables, quantities which are accessible in experiments.

Postabsorption concentration peaks with brand-name and generic verapamil: a double-blind, crossover study in elderly hypertensive patients.

PubMed

Saseen, J J; Porter, J A; Barnette, D J; Bauman, J L; Zajac, E J; Carter, B L

1997-06-01

The pharmacokinetic actions, bioequivalence, and cardiovascular effects of two verapamil products were studied in a randomized, double-blind, crossover study in eight elderly hypertensive patients (median age, 69.5 years; range, 60-79 years) given brand-name or generic immediate-release verapamil in 120-mg twice-daily doses for 14 days. Blood pressures, heart rates, P-R intervals; and serum concentrations of R-/S-verapamil and norverapamil were measured multiple times in patients during the last day of each therapy. Median blood pressure decreased more with generic verapamil than with the brand-name drug, with the largest difference occurring at 0.5 hours (137/74 mmHg versus 144.5/80.5 mmHg; P = 0.05 and 0.091, respectively). Pharmacokinetic parameters were not different for the two products (P < 0.01). However, the generic product, compared with the brand-name drug, had mean area under the concentration-time curve (time 0 to 12 hours) ratios (90% CI) of 1.09 (0.78-1.52), 1.16 (0.87-1.55) and 1.11 (0.81-1.52) for R-, S-, and total verapamil. Seventy concentration peaks (31 with the brand-name drug, 39 with the generic drug) appeared between 8 and 24 hours. Median percentages of increase of these peaks, compared with those of previous concentrations, were 48.3% and 36.3% for brand-name and generic drugs, respectively. Fifty of the 70 peaks (71%) were associated with a stereospecific concentration peak of norverapamil and, temporally, with meals. Our findings suggest that whereas the two verapamil products may not be bioequivalent by Food and Drug Administration criteria, the observed differences in effects were not clinically significant in this elderly population. Multiple concentration peaks after absorption were observed in all patients with both verapamil products and were perhaps related to enterohepatic recirculation.

On the use of tower-flux measurements to assess the performance of global ecosystem models

NASA Astrophysics Data System (ADS)

El Maayar, M.; Kucharik, C.

2003-04-01

Global ecosystem models are important tools for the study of biospheric processes and their responses to environmental changes. Such models typically translate knowledge, gained from local observations, into estimates of regional or even global outcomes of ecosystem processes. A typical test of ecosystem models consists of comparing their output against tower-flux measurements of land surface-atmosphere exchange of heat and mass. To perform such tests, models are typically run using detailed information on soil properties (texture, carbon content,...) and vegetation structure observed at the experimental site (e.g., vegetation height, vegetation phenology, leaf photosynthetic characteristics,...). In global simulations, however, earth's vegetation is typically represented by a limited number of plant functional types (PFT; group of plant species that have similar physiological and ecological characteristics). For each PFT (e.g., temperate broadleaf trees, boreal conifer evergreen trees,...), which can cover a very large area, a set of typical physiological and physical parameters are assigned. Thus, a legitimate question arises: How does the performance of a global ecosystem model run using detailed site-specific parameters compare with the performance of a less detailed global version where generic parameters are attributed to a group of vegetation species forming a PFT? To answer this question, we used a multiyear dataset, measured at two forest sites with contrasting environments, to compare seasonal and interannual variability of surface-atmosphere exchange of water and carbon predicted by the Integrated BIosphere Simulator-Dynamic Global Vegetation Model. Two types of simulations were, thus, performed: a) Detailed runs: observed vegetation characteristics (leaf area index, vegetation height,...) and soil carbon content, in addition to climate and soil type, are specified for model run; and b) Generic runs: when only observed climates and soil types at the measurement sites are used to run the model. The generic runs were performed for the number of years equal to the current age of the forests, initialized with no vegetation and a soil carbon density equal to zero.

Generic torus canards

NASA Astrophysics Data System (ADS)

Vo, Theodore

2017-10-01

Torus canards are special solutions of fast/slow systems that alternate between attracting and repelling manifolds of limit cycles of the fast subsystem. A relatively new dynamic phenomenon, torus canards have been found in neural applications to mediate the transition from tonic spiking to bursting via amplitude-modulated spiking. In R3, torus canards are degenerate: they require one-parameter families of 2-fast/1-slow systems in order to be observed and even then, they only occur on exponentially thin parameter intervals. The addition of a second slow variable unfolds the torus canard phenomenon, making it generic and robust. That is, torus canards in fast/slow systems with (at least) two slow variables occur on open parameter sets. So far, generic torus canards have only been studied numerically, and their behaviour has been inferred based on averaging and canard theory. This approach, however, has not been rigorously justified since the averaging method breaks down near a fold of periodics, which is exactly where torus canards originate. In this work, we combine techniques from Floquet theory, averaging theory, and geometric singular perturbation theory to show that the average of a torus canard is a folded singularity canard. In so doing, we devise an analytic scheme for the identification and topological classification of torus canards in fast/slow systems with two fast variables and k slow variables, for any positive integer k. We demonstrate the predictive power of our results in a model for intracellular calcium dynamics, where we explain the mechanisms underlying a novel class of elliptic bursting rhythms, called amplitude-modulated bursting, by constructing the torus canard analogues of mixed-mode oscillations. We also make explicit the connection between our results here with prior studies of torus canards and torus canard explosion in R3, and discuss how our methods can be extended to fast/slow systems of arbitrary (finite) dimension.

Regional mapping of depression-focussed groundwater recharge incorporating variable topography, climate, and land use

NASA Astrophysics Data System (ADS)

Pavlovskii, I.; Noorduijn, S. L.; Abrakhimova, P.; Bentley, L. R.; Cey, E. E.; Hayashi, M.

2016-12-01

In the water-deficient setting of the Northern Great Plains (or Prairie Pothole Region, PPR), groundwater recharge constitutes only a small fraction of the water budget, meaning that recharge estimates have a high degree of uncertainty. Additionally, recharge primarily occurs as focussed recharge when small topographical depressions are inundated by surface runoff, typically during spring melt while underlying soils are still frozen. This results in a high spatial and temporal variability of recharge rates, which further complicates their evaluation. As part of a major research project called Groundwater Recharge in the Prairies (GRIP), we have developed a soil water balance model to estimate recharge rates at a scale of a single depression and its catchment (< 10 ha). In the next stage of the GRIP project, the present study investigates the possibility of applying this tool for recharge mapping on a regional scale in the Edmonton-Calgary corridor in Alberta, located in the north-western fringe of the PPR. The entire area (49500 km2) was divided into elements based on the proximity to one of 24 Alberta Agriculture weather stations. For each element, the model was run for a series of generic scenarios consisting of representative land use and depression catchment parameters. The latter were constructed using a high-resolution digital elevation model (DEM). The recharge value for each element was then computed using a weighted average of the generic scenario outputs. The new method has a number of benefits. Use of generic scenarios instead of real depressions dramatically reduces computational cost. Extraction of relevant parameters from DEM accounts for depressions which are only flooded sporadically and thus may be absent from the inventories of wet areas based on satellite images. If extra data on topographical parameters become available, the recharge may be recalculated without repeating the entire workflow.

A Prototype Performance Assessment Model for Generic Deep Borehole Repository for High-Level Nuclear Waste - 12132

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Joon H.; Arnold, Bill W.; Swift, Peter N.

2012-07-01

A deep borehole repository is one of the four geologic disposal system options currently under study by the U.S. DOE to support the development of a long-term strategy for geologic disposal of commercial used nuclear fuel (UNF) and high-level radioactive waste (HLW). The immediate goal of the generic deep borehole repository study is to develop the necessary modeling tools to evaluate and improve the understanding of the repository system response and processes relevant to long-term disposal of UNF and HLW in a deep borehole. A prototype performance assessment model for a generic deep borehole repository has been developed using themore » approach for a mined geological repository. The preliminary results from the simplified deep borehole generic repository performance assessment indicate that soluble, non-sorbing (or weakly sorbing) fission product radionuclides, such as I-129, Se-79 and Cl-36, are the likely major dose contributors, and that the annual radiation doses to hypothetical future humans associated with those releases may be extremely small. While much work needs to be done to validate the model assumptions and parameters, these preliminary results highlight the importance of a robust seal design in assuring long-term isolation, and suggest that deep boreholes may be a viable alternative to mined repositories for disposal of both HLW and UNF. (authors)« less

Comparison of Standard Wind Turbine Models with Vendor Models for Power System Stability Analysis: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honrubia-Escribano, A.; Gomez Lazaro, E.; Jimenez-Buendia, F.

The International Electrotechnical Commission Standard 61400-27-1 was published in February 2015. This standard deals with the development of generic terms and parameters to specify the electrical characteristics of wind turbines. Generic models of very complex technological systems, such as wind turbines, are thus defined based on the four common configurations available in the market. Due to its recent publication, the comparison of the response of generic models with specific vendor models plays a key role in ensuring the widespread use of this standard. This paper compares the response of a specific Gamesa dynamic wind turbine model to the corresponding genericmore » IEC Type III wind turbine model response when the wind turbine is subjected to a three-phase voltage dip. This Type III model represents the doubly-fed induction generator wind turbine, which is not only one of the most commonly sold and installed technologies in the current market but also a complex variable-speed operation implementation. In fact, active and reactive power transients are observed due to the voltage reduction. Special attention is given to the reactive power injection provided by the wind turbine models because it is a requirement of current grid codes. Further, the boundaries of the generic models associated with transient events that cannot be represented exactly are included in the paper.« less

Distribution of a Generic Mission Planning and Scheduling Toolkit for Astronomical Spacecraft

NASA Technical Reports Server (NTRS)

Kleiner, Steven C.

1998-01-01

This 2-year report describes the progress made to date on the project to package and distribute the planning and scheduling toolkit for the SWAS astronomical spacecraft. SWAS was scheduled to be launched on a Pegasus XL vehicle in fall 1995. Three separate failures in the launch vehicle have delayed the SWAS launch. The researchers have used this time to continue developing scheduling algorithms and GUI design. SWAS is expected to be launched this year.

Assessing Impact of Distributions and Dependencies in Analysis of Alternatives of System of Systems: Phase 3

DTIC Science & Technology

2013-12-19

32 3.3 An Approach for Evaluating System-of-Systems Operational Benefits of a...delay of a flight under IMC ............................................... 41 Figure 15: Sensitivity of delay of each of the four segments to...85 Figure 43: Generic SoS node behaviors

A Network Design Architecture for Distribution of Generic Scene Graphs

DTIC Science & Technology

1999-09-01

with UML. Addison Wesley. Deitel, H. and Deitel, P. 1994. C++ How to Program . Prentice Hall. Deitel, H. and Deitel, P. 1998. JAVA How ... to . Program . Prentice.Hall. Eckel, B. 1998. Thinking in JAVA. Prentice Hall. 141 Edwards, J. 1997. 3-Tier Client/Server At Work. John

FAMILY ASILIDAE.

PubMed

Wolff, Marta; Lamas, Carlos José Einicker

2016-06-14

Asilidae is one of the largest Diptera families with more than 7,000 recognized species worldwide. All their species are predators on arthropods, mainly insects. This catalogue presents 71 species distributed in 26 genera, ten tribes or generic groups and four subfamilies. For each species we present the available geographical information and relevant references.

Kmonodium, a Program for the Numerical Solution of the One-Dimensional Schrodinger Equation

ERIC Educational Resources Information Center

Angeli, Celestino; Borini, Stefano; Cimiraglia, Renzo

2005-01-01

A very simple strategy for the solution of the Schrodinger equation of a particle moving in one dimension subjected to a generic potential is presented. This strategy is implemented in a computer program called Kmonodium, which is free and distributed under the General Public License (GPL).

Proceedings of the 1987 conference on tools for the simulation profession

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hawkins, R.; Klukis, K.

1987-01-01

This book covers the proceedings of the 1987 conference on tools for the simulation profession. Some of the topics are: SIMULACT: a generic tool for simulating distributed systems; ESL language simulation of spacecraft batteries; and Trends in global cadmium levels from increased use of fossil fuels.

To Market, To Market--Careers in the Online Industry. . .Fifth in a Series.

ERIC Educational Resources Information Center

Kremin, Michael C.

1985-01-01

Reviews demand for marketing personnel in online industry and provides brief descriptions of generic positions which include information on background and experience needed: vice president of marketing, sales manager, sales representative, advertising manager, product manager, marketing research manager, distribution manager, service manager,…

A Three-Level Analysis of Collaborative Learning in Dual-Interaction Spaces

ERIC Educational Resources Information Center

Lonchamp, Jacques

2009-01-01

CSCL systems which follow the dual-interaction spaces paradigm support the synchronous construction and discussion of shared artifacts by distributed or colocated small groups of learners. The most recent generic dual-interaction space environments, either model based or component based, can be deeply customized by teachers for supporting…

Factorial invariance of child self-report across age subgroups: a confirmatory factor analysis of ages 5 to 16 years utilizing the PedsQL 4.0 Generic Core Scales.

PubMed

Limbers, Christine A; Newman, Daniel A; Varni, James W

2008-01-01

The utilization of health-related quality of life (HRQOL) measurement in an effort to improve pediatric health and well-being and determine the value of health care services has grown dramatically over the past decade. The paradigm shift toward patient-reported outcomes (PROs) in clinical trials has provided the opportunity to emphasize the value and essential need for pediatric patient self-report. In order for HRQOL/PRO comparisons to be meaningful for subgroup analyses, it is essential to demonstrate factorial invariance. This study examined age subgroup factorial invariance of child self-report for ages 5 to 16 years on more than 8,500 children utilizing the PedsQL 4.0 Generic Core Scales. Multigroup Confirmatory Factor Analysis (MGCFA) was performed specifying a five-factor model. Two multigroup structural equation models, one with constrained parameters and the other with unconstrained parameters, were proposed to compare the factor loadings across the age subgroups. Metric invariance (i.e., equal factor loadings) across the age subgroups was demonstrated based on stability of the Comparative Fit Index between the two models, and several additional indices of practical fit including the Root Mean Squared Error of Approximation, the Non-Normed Fit Index, and the Parsimony Normed Fit Index. The findings support an equivalent five-factor structure across the age subgroups. Based on these data, it can be concluded that children across the age subgroups in this study interpreted items on the PedsQL 4.0 Generic Core Scales in a similar manner regardless of their age.

Failure to Treat Life-Threatening Ventricular Tachyarrhythmias in Contemporary Implantable Cardioverter–Defibrillators

PubMed Central

Thøgersen, Anna Margrethe; Larsen, Jacob Moesgaard; Johansen, Jens Brock; Abedin, Moeen

2017-01-01

Background: In clinical trials, manufacturer-specific, strategic programming of implantable cardioverter–defibrillators (ICDs), including faster detection rates, reduces unnecessary therapy but permits therapy for ventricular tachycardia/ventricular fibrillation (VF). Present consensus recommends a generic rate threshold between 185 and 200 beats per minute, which exceeds the rate tested in clinical trials for some manufacturers. In a case series, we sought to determine the relationship between programmed parameters and failure of modern ICDs to treat VF. Methods and Results: We reviewed cases in which normally functioning ICDs failed to deliver timely therapy for VF from April 2015 to January 2017 at 4 institutions. Of 10 ambulatory patients, 5 died from untreated VF, 4 had cardiac arrests requiring external shocks, and 1 was rescued by a delayed ICD shock. VF did not satisfy programmed detection criteria in 9 patients (90%). Seven of these patients had slowest detection rates that were consistent with generic recommendations but not tested in a peer-reviewed trial for their manufacturer’s ICDs. Manufacturer-specific factors interacted with fast detection rates to withhold therapy, including strict VF episode termination rules, enhancements to minimize T-wave oversensing, and features that restrict therapy to regular rhythms in ventricular tachycardia zones. Untreated VF despite recommended programming accounted for 56% of sudden deaths and 11% of all deaths during the study period. Conclusions: Complex and unanticipated interactions between manufacturer-specific features and generic programming can prevent therapy for VF. More data are needed to assess the risks and benefits of translating evidence-based detection parameters from one manufacturer to another. PMID:28916511

Key drivers for market penetration of biosimilars in Europe.

PubMed

Rémuzat, Cécile; Dorey, Julie; Cristeau, Olivier; Ionescu, Dan; Radière, Guerric; Toumi, Mondher

2017-01-01

Background & Objectives : Potential drivers and barriers of biosimilar uptake were mainly analysed through qualitative approaches. The study objective was to conduct a quantitative analysis and identify drivers of biosimilar uptake of all available biosimilars in the European Union (EU). Methods : A three-step process was established to identify key drivers for the uptake of biosimilars in the top 10 EU member states (MS) pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK): (1) literature review to identify incentive policies in place to enhance biosimilars adoption; (2) assessment of biosimilar market dynamics based on database analysis; (3) regression model analysis on price using the following explicative variables: incentive policies; price difference between the biosimilar and the originator product; distribution channel; generic uptake and generic price cut; pharmaceutical expenditure per capita; and market competition. Results : At the study cut-off date, 20 biosimilars were available on the market. Incentive policies applied to biosimilars were found to be heterogeneous across countries, and uptakes of biosimilars were also very heterogeneous between different therapeutic classes and countries. Results from the model demonstrated that incentive policies and the date of first biosimilar market entry were correlated to biosimilar uptake. Pharmaceutical expenditure per capita and the highest generic uptake were inversely correlated with biosimilar uptake. Average generic price discount over originator and the number of biosimilars showed a trend toward statistical significance for correlation with biosimilar uptake, but did not reach the significance threshold. Biosimilar price discount over original biologic price, the number of analogues, and the distribution channel were not correlated with the biosimilar uptake. Conclusions : Understanding drivers of biosimilar uptake becomes a critical issue to inform policy decision-makers. This study showed that incentive policies to enhance uptake remain an important driver of biosimilar penetration, while biosimilar price discounts have no impact. Future research is warranted when the biosimilar market gains maturity.

Key drivers for market penetration of biosimilars in Europe

PubMed Central

Rémuzat, Cécile; Dorey, Julie; Cristeau, Olivier; Ionescu, Dan; Radière, Guerric; Toumi, Mondher

2017-01-01

ABSTRACT Background & Objectives: Potential drivers and barriers of biosimilar uptake were mainly analysed through qualitative approaches. The study objective was to conduct a quantitative analysis and identify drivers of biosimilar uptake of all available biosimilars in the European Union (EU). Methods: A three-step process was established to identify key drivers for the uptake of biosimilars in the top 10 EU member states (MS) pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK): (1) literature review to identify incentive policies in place to enhance biosimilars adoption; (2) assessment of biosimilar market dynamics based on database analysis; (3) regression model analysis on price using the following explicative variables: incentive policies; price difference between the biosimilar and the originator product; distribution channel; generic uptake and generic price cut; pharmaceutical expenditure per capita; and market competition. Results: At the study cut-off date, 20 biosimilars were available on the market. Incentive policies applied to biosimilars were found to be heterogeneous across countries, and uptakes of biosimilars were also very heterogeneous between different therapeutic classes and countries. Results from the model demonstrated that incentive policies and the date of first biosimilar market entry were correlated to biosimilar uptake. Pharmaceutical expenditure per capita and the highest generic uptake were inversely correlated with biosimilar uptake. Average generic price discount over originator and the number of biosimilars showed a trend toward statistical significance for correlation with biosimilar uptake, but did not reach the significance threshold. Biosimilar price discount over original biologic price, the number of analogues, and the distribution channel were not correlated with the biosimilar uptake. Conclusions: Understanding drivers of biosimilar uptake becomes a critical issue to inform policy decision-makers. This study showed that incentive policies to enhance uptake remain an important driver of biosimilar penetration, while biosimilar price discounts have no impact. Future research is warranted when the biosimilar market gains maturity. PMID:28265349

How do ensembles occupy space?

NASA Astrophysics Data System (ADS)

Daffertshofer, A.

2008-04-01

To find an answer to the title question, an attractiveness function between agents and locations is introduced yielding a phenomenological but generic model for the search for optimal distributions of agents over space. Agents can be seen as, e.g., members of biological populations like colonies of bacteria, swarms, and so on. The global attractiveness between agents and locations is maximized causing (self-propelled) `motion' of agents and, eventually, distinct distributions of agents over space. At the same token spontaneous changes or `decisions' are realized via competitions between agents as well as between locations. Hence, the model's solutions can be considered a sequence of decisions of agents during their search for a proper location. Depending on initial conditions both optimal as well as suboptimal configurations can be reached. For the latter early decision-making are important for avoiding possible conflicts: if the proper moment is missed, then only a few agents can find an optimal solution. Indeed, there is a delicate interplay between the values of the attractiveness function and the constraints as can be expressed by distinct terms of a potential function containing different Lagrange parameters. The model should be viewed as a top-down approach as it describes the dynamics of order parameters, i.e. macroscopic variables that reflect affiliations between agents and locations. The dynamics, however, is modified via so-called cost functions that are interpreted in terms of affinity levels. This interpretation can be seen as an original step towards an understanding of the dynamics at the underlying microscopic level. When focusing on the agent, one may say that the dynamics of an order parameter shows the evolution of an agent's intrinsic `map' for solving the problem of space occupation. Importantly, the dynamics does not necessarily distinguish between evolving (or moving) agents and evolving (or moving) locations though agents are more likely to be actors than the locations. Put differently, an order parameter describes an internal map which is linked to the expectation of an agent to find a certain location. Owing to the dynamical representation, we can therefore follow up the change of these maps over time leading from uncertainty to certainty.

KINK AND SAUSAGE MODES IN NONUNIFORM MAGNETIC SLABS WITH CONTINUOUS TRANSVERSE DENSITY DISTRIBUTIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Hui; Li, Bo; Chen, Shao-Xia

2015-11-20

We examine the influence of a continuous density structuring transverse to coronal slabs on the dispersive properties of fundamental standing kink and sausage modes supported therein. We derive generic dispersion relations (DRs) governing linear fast waves in pressureless straight slabs with general transverse density distributions, and focus on cases where the density inhomogeneity takes place in a layer of arbitrary width and in arbitrary form. The physical relevance of the solutions to the DRs is demonstrated by the corresponding time-dependent computations. For all profiles examined, the lowest order kink modes are trapped regardless of longitudinal wavenumber k. A continuous density distribution introducesmore » a difference to their periods of ≲13% when k is the observed range relative to the case where the density profile takes a step function form. Sausage modes and other branches of kink modes are leaky at small k, and their periods and damping times are heavily influenced by how the transverse density profile is prescribed, in particular the length scale. These modes have sufficiently high quality to be observable only for physical parameters representative of flare loops. We conclude that while the simpler DR pertinent to a step function profile can be used for the lowest order kink modes, the detailed information on the transverse density structuring needs to be incorporated into studies of sausage modes and higher order kink modes.« less

Using spatial principles to optimize distributed computing for enabling the physical science discoveries

PubMed Central

Yang, Chaowei; Wu, Huayi; Huang, Qunying; Li, Zhenlong; Li, Jing

2011-01-01

Contemporary physical science studies rely on the effective analyses of geographically dispersed spatial data and simulations of physical phenomena. Single computers and generic high-end computing are not sufficient to process the data for complex physical science analysis and simulations, which can be successfully supported only through distributed computing, best optimized through the application of spatial principles. Spatial computing, the computing aspect of a spatial cyberinfrastructure, refers to a computing paradigm that utilizes spatial principles to optimize distributed computers to catalyze advancements in the physical sciences. Spatial principles govern the interactions between scientific parameters across space and time by providing the spatial connections and constraints to drive the progression of the phenomena. Therefore, spatial computing studies could better position us to leverage spatial principles in simulating physical phenomena and, by extension, advance the physical sciences. Using geospatial science as an example, this paper illustrates through three research examples how spatial computing could (i) enable data intensive science with efficient data/services search, access, and utilization, (ii) facilitate physical science studies with enabling high-performance computing capabilities, and (iii) empower scientists with multidimensional visualization tools to understand observations and simulations. The research examples demonstrate that spatial computing is of critical importance to design computing methods to catalyze physical science studies with better data access, phenomena simulation, and analytical visualization. We envision that spatial computing will become a core technology that drives fundamental physical science advancements in the 21st century. PMID:21444779

Using spatial principles to optimize distributed computing for enabling the physical science discoveries.

PubMed

Yang, Chaowei; Wu, Huayi; Huang, Qunying; Li, Zhenlong; Li, Jing

2011-04-05

Contemporary physical science studies rely on the effective analyses of geographically dispersed spatial data and simulations of physical phenomena. Single computers and generic high-end computing are not sufficient to process the data for complex physical science analysis and simulations, which can be successfully supported only through distributed computing, best optimized through the application of spatial principles. Spatial computing, the computing aspect of a spatial cyberinfrastructure, refers to a computing paradigm that utilizes spatial principles to optimize distributed computers to catalyze advancements in the physical sciences. Spatial principles govern the interactions between scientific parameters across space and time by providing the spatial connections and constraints to drive the progression of the phenomena. Therefore, spatial computing studies could better position us to leverage spatial principles in simulating physical phenomena and, by extension, advance the physical sciences. Using geospatial science as an example, this paper illustrates through three research examples how spatial computing could (i) enable data intensive science with efficient data/services search, access, and utilization, (ii) facilitate physical science studies with enabling high-performance computing capabilities, and (iii) empower scientists with multidimensional visualization tools to understand observations and simulations. The research examples demonstrate that spatial computing is of critical importance to design computing methods to catalyze physical science studies with better data access, phenomena simulation, and analytical visualization. We envision that spatial computing will become a core technology that drives fundamental physical science advancements in the 21st century.

Generic Design Procedures for the Repair of Acoustically Damaged Panels

DTIC Science & Technology

2008-12-01

plate for component 1 h2 Thickness of plate for component 2 h3 Thickness of plate for component 3 h13 Distance from centroid of component 1 to centroid...E1 View AA Simply supported/clamped plate h13 Ly Lx y x d3 d1 y 2a Figure 4: Geometry for constrained layer damping of a simply...dimensions, properties and parameters Physical dimensions (Figure 4) Material properties Key parameters h1, h2 , h3 , h13 , Lx , Ly , 2a E1 , E3 , G2

Perception and attitude of general practitioners regarding generic medicines in Karachi, Pakistan: A questionnaire based study

PubMed Central

Jamshed, Shazia Qasim; Ibrahim, Mohamed Izham Mohamed; Hassali, Mohamed Azmi Ahmad; Masood, Imran; Low, Bee Yean; Shafie, Asrul Akmal; Babar, Zaheer-ud-din

2012-01-01

Objectives: In developing countries out-of-pocket payments (OOP) are as high as 80% of healthcare spending. Generic medicines can be instrumental in reducing this expenditure. The current study is aimed to explore the knowledge, perception, and attitude of general practitioners towards generic medicines in Karachi, Pakistan. Methods: This exploratory, descriptive study was conducted on a sample of 289 randomly selected general practitioners who were dispensing at their private clinics in Karachi, Pakistan. The questionnaires were distributed and collected by hand. Data was entered to SPSS version 17. Fischer’s exact test was applied to see the association between variables. Results: A total of 206 questionnaires were included in the study. A response rate of 71.3% was achieved. Out of 206 respondents, 139 (67.5%) were male while 67 (32.5%) respondents were female. Close to three quaters of the respondents (n= 148; 71.8%) showed correct knowledge about generic medicines being a ‘copy of the brand name medicines’ and ‘interchangeable with brand name medicines’ (n= 148; 71.8%). In terms of safety, the majority of respondents (n=85; 41.26%) incorrectly understood that the generic medicines are less safe than brand name medicines. The total percentage of correct responses was seen in 53% of the respondents. More than half of the respondents agreed that locally manufactured medicines are of the same effectiveness as brand name medicines (n=114; 55.4%). Male practitioners with practice experience of 11-15 years showed positive perception towards the quality of multinational products. The Majority of respondents believed that their prescribing decision is influenced by medical representatives (n=117; 56.8%). More than three-quarters of the respondents expressed their wish to prescribe low cost medicines in their practice (n=157; 76.2%). More than one third of the respondents expressed their uneasiness to prescribe products from all local manufacturers (n=72; 35%). Conclusion: There were gaps identified in the knowledge of respondents. Although good perception and attitude were noted among the respondents, dissemination of information regarding generic medicines may perhaps strengthen generic prescribing. There is a need to introduce ‘Quality by Design’ concept in local manufacturing units. This, in turn, can inculcate confidence in prescribers towards locally manufactured generic medicines. PMID:23093896

Generic Entry, Reformulations, and Promotion of SSRIs

PubMed Central

Donohue, Julie M.; Koss, Catherine; Berndt, Ernst R.; Frank, Richard G.

2009-01-01

Background Previous research has shown that a manufacturer’s promotional strategy for a brand-name drug is typically affected by generic entry. However, little is known about how newer strategies to extend patent life, including product reformulation introduction or obtaining approval to market for additional clinical indications, influence promotion. Objective To examine the relationship between promotional expenditures, generic entry, reformulation entry, and new indication approval. Study Design/Setting We used quarterly data on national product-level promotional spending (including expenditures for physician detailing and direct-to-consumer advertising (DTCA), and the retail value of free samples distributed in physician offices) for selective serotonin reuptake inhibitors (SSRIs) over the period 1997 through 2004. We estimated econometric models of detailing, DTCA, and total quarterly promotional expenditures as a function of the timing of generic entry, entry of new product formulations, and Food and Drug Administration (FDA) approval for new clinical indications for existing medications in the SSRI class. Main Outcome Measure Expenditures by pharmaceutical manufacturers for promotion of antidepressant medications. Results Over the period 1997–2004, there was considerable variation in the composition of promotional expenditures across the SSRIs. Promotional expenditures for the original brand molecule decreased dramatically when a reformulation of the molecule was introduced. Promotional spending (both total and detailing alone) for a specific molecule was generally lower after generic entry than before, although the effect of generic entry on promotional spending appears to be closely linked with the choice of product reformulation strategy pursued by the manufacturer. Detailing expenditures for Paxil were increased after the manufacturer received FDA approval to market the drug for generalized anxiety disorder (GAD), while the likelihood of DTCA outlays for the drug was not changed. In contrast, FDA approval to market Paxil and Zoloft for social anxiety disorder (SAD) did not affect the manufacturers’ detailing expenditures but did result in a greater likelihood of DTCA outlays. Conclusion The introduction of new product formulations appears to be a common strategy for attempting to extend market exclusivity for medications facing impending generic entry. Manufacturers that introduced a reformulation before generic entry shifted most promotion dollars from the original brand to the reformulation long before generic entry, and in some cases manufacturers appeared to target a particular promotion type for a given indication. Given the significant impact pharmaceutical promotion has on demand for prescription drugs, these findings have important implications for prescription drug spending and public health. PMID:18563951

A distributed Clips implementation: dClips

NASA Technical Reports Server (NTRS)

Li, Y. Philip

1993-01-01

A distributed version of the Clips language, dClips, was implemented on top of two existing generic distributed messaging systems to show that: (1) it is easy to create a coarse-grained parallel programming environment out of an existing language if a high level messaging system is used; and (2) the computing model of a parallel programming environment can be changed easily if we change the underlying messaging system. dClips processes were first connected with a simple master-slave model. A client-server model with intercommunicating agents was later implemented. The concept of service broker is being investigated.

Safe uses of Hill's model: an exact comparison with the Adair-Klotz model

PubMed Central

2011-01-01

Background The Hill function and the related Hill model are used frequently to study processes in the living cell. There are very few studies investigating the situations in which the model can be safely used. For example, it has been shown, at the mean field level, that the dose response curve obtained from a Hill model agrees well with the dose response curves obtained from a more complicated Adair-Klotz model, provided that the parameters of the Adair-Klotz model describe strongly cooperative binding. However, it has not been established whether such findings can be extended to other properties and non-mean field (stochastic) versions of the same, or other, models. Results In this work a rather generic quantitative framework for approaching such a problem is suggested. The main idea is to focus on comparing the particle number distribution functions for Hill's and Adair-Klotz's models instead of investigating a particular property (e.g. the dose response curve). The approach is valid for any model that can be mathematically related to the Hill model. The Adair-Klotz model is used to illustrate the technique. One main and two auxiliary similarity measures were introduced to compare the distributions in a quantitative way. Both time dependent and the equilibrium properties of the similarity measures were studied. Conclusions A strongly cooperative Adair-Klotz model can be replaced by a suitable Hill model in such a way that any property computed from the two models, even the one describing stochastic features, is approximately the same. The quantitative analysis showed that boundaries of the regions in the parameter space where the models behave in the same way exhibit a rather rich structure. PMID:21521501

Effect of temperature on the phenology of Chilo partellus (Swinhoe) (Lepidoptera, Crambidae); simulation and visualization of the potential future distribution of C. partellus in Africa under warmer temperatures through the development of life-table parameters.

PubMed

Khadioli, N; Tonnang, Z E H; Muchugu, E; Ong'amo, G; Achia, T; Kipchirchir, I; Kroschel, J; Le Ru, B

2014-12-01

Maize (Zea mays) is a major staple food in Africa. However, maize production is severely reduced by damage caused by feeding lepidopteran pests. In East and Southern Africa, Chilo partellus is one of the most damaging cereal stem borers mainly found in the warmer lowland areas. In this study, it was hypothesized that the future distribution and abundance of C. partellus may be affected greatly by the current global warming. The temperature-dependent population growth potential of C. partellus was studied on artificial diet under laboratory conditions at six constant temperatures (15, 18, 20, 25, 28, 30, 32 and 35 °C), relative humidity of 75±5% and a photoperiod of L12:L12 h. Several non-linear models were fitted to the data to model development time, mortality and reproduction of the insect species. Cohort updating algorithm and rate summation approach were stochastically used for simulating age and stage structure populations and generate life-table parameters. For spatial analysis of the pest risk, three generic risk indices (index of establishment, generation number and activity index) were visualized in the geographical information system component of the advanced Insect Life Cycle modeling (ILCYM) software. To predict the future distribution of C. partellus we used the climate change scenario A1B obtained from WorldClim and CCAFS databases. The maps were compared with available data on the current distribution of C. partellus in Kenya. The results show that the development times of the different stages decreased with increasing temperatures ranging from 18 to 35 °C; at the extreme temperatures, 15 and 38 °C, no egg could hatch and no larvae completed development. The study concludes that C. partellus may potentially expands its range into higher altitude areas, highland tropics and moist transitional regions, with the highest maize potential where the species has not been recorded yet. This has serious implication in terms of food security since these areas produce approximately 80% of the total maize in East Africa.

Hybrid Inflation: Multi-field Dynamics and Cosmological Constraints

NASA Astrophysics Data System (ADS)

Clesse, Sébastien

2011-09-01

The dynamics of hybrid models is usually approximated by the evolution of a scalar field slowly rolling along a nearly flat valley. Inflation ends with a waterfall phase, due to a tachyonic instability. This final phase is usually assumed to be nearly instantaneous. In this thesis, we go beyond these approximations and analyze the exact 2-field dynamics of hybrid models. Several effects are put in evidence: 1) the possible slow-roll violations along the valley induce the non existence of inflation at small field values. Provided super-planckian fields, the scalar spectrum of the original model is red, in agreement with observations. 2) The initial field values are not fine-tuned along the valley but also occupy a considerable part of the field space exterior to it. They form a structure with fractal boundaries. Using bayesian methods, their distribution in the whole parameter space is studied. Natural bounds on the potential parameters are derived. 3) For the original model, inflation is found to continue for more than 60 e-folds along waterfall trajectories in some part of the parameter space. The scalar power spectrum of adiabatic perturbations is modified and is generically red, possibly in agreement with CMB observations. Topological defects are conveniently stretched outside the observable Universe. 4) The analysis of the initial conditions is extended to the case of a closed Universe, in which the initial singularity is replaced by a classical bounce. In the third part of the thesis, we study how the present CMB constraints on the cosmological parameters could be ameliorated with the observation of the 21cm cosmic background, by future giant radio-telescopes. Forecasts are determined for a characteristic Fast Fourier Transform Telescope, by using both Fisher matrix and MCMC methods.

Evaluating Drug Prices, Availability, Affordability, and Price Components: Implications for Access to Drugs in Malaysia

PubMed Central

Babar, Zaheer Ud Din; Ibrahim, Mohamed Izham Mohamed; Singh, Harpal; Bukahri, Nadeem Irfan; Creese, Andrew

2007-01-01

Background Malaysia's stable health care system is facing challenges with increasing medicine costs. To investigate these issues a survey was carried out to evaluate medicine prices, availability, affordability, and the structure of price components. Methods and Findings The methodology developed by the World Health Organization (WHO) and Health Action International (HAI) was used. Price and availability data for 48 medicines was collected from 20 public sector facilities, 32 private sector retail pharmacies and 20 dispensing doctors in four geographical regions of West Malaysia. Medicine prices were compared with international reference prices (IRPs) to obtain a median price ratio. The daily wage of the lowest paid unskilled government worker was used to gauge the affordability of medicines. Price component data were collected throughout the supply chain, and markups, taxes, and other distribution costs were identified. In private pharmacies, innovator brand (IB) prices were 16 times higher than the IRPs, while generics were 6.6 times higher. In dispensing doctor clinics, the figures were 15 times higher for innovator brands and 7.5 for generics. Dispensing doctors applied high markups of 50%–76% for IBs, and up to 316% for generics. Retail pharmacy markups were also high—25%–38% and 100%–140% for IBs and generics, respectively. In the public sector, where medicines are free, availability was low even for medicines on the National Essential Drugs List. For a month's treatment for peptic ulcer disease and hypertension people have to pay about a week's wages in the private sector. Conclusions The free market by definition does not control medicine prices, necessitating price monitoring and control mechanisms. Markups for generic products are greater than for IBs. Reducing the base price without controlling markups may increase profits for retailers and dispensing doctors without reducing the price paid by end users. To increase access and affordability, promotion of generic medicines and improved availability of medicines in the public sector are required. PMID:17388660

Evaluating drug prices, availability, affordability, and price components: implications for access to drugs in Malaysia.

PubMed

Babar, Zaheer Ud Din; Ibrahim, Mohamed Izham Mohamed; Singh, Harpal; Bukahri, Nadeem Irfan; Creese, Andrew

2007-03-27

Malaysia's stable health care system is facing challenges with increasing medicine costs. To investigate these issues a survey was carried out to evaluate medicine prices, availability, affordability, and the structure of price components. The methodology developed by the World Health Organization (WHO) and Health Action International (HAI) was used. Price and availability data for 48 medicines was collected from 20 public sector facilities, 32 private sector retail pharmacies and 20 dispensing doctors in four geographical regions of West Malaysia. Medicine prices were compared with international reference prices (IRPs) to obtain a median price ratio. The daily wage of the lowest paid unskilled government worker was used to gauge the affordability of medicines. Price component data were collected throughout the supply chain, and markups, taxes, and other distribution costs were identified. In private pharmacies, innovator brand (IB) prices were 16 times higher than the IRPs, while generics were 6.6 times higher. In dispensing doctor clinics, the figures were 15 times higher for innovator brands and 7.5 for generics. Dispensing doctors applied high markups of 50%-76% for IBs, and up to 316% for generics. Retail pharmacy markups were also high-25%-38% and 100%-140% for IBs and generics, respectively. In the public sector, where medicines are free, availability was low even for medicines on the National Essential Drugs List. For a month's treatment for peptic ulcer disease and hypertension people have to pay about a week's wages in the private sector. The free market by definition does not control medicine prices, necessitating price monitoring and control mechanisms. Markups for generic products are greater than for IBs. Reducing the base price without controlling markups may increase profits for retailers and dispensing doctors without reducing the price paid by end users. To increase access and affordability, promotion of generic medicines and improved availability of medicines in the public sector are required.

Comparative bioavailability and pharmacokinetics of two oral formulations of flurbiprofen: a single-dose, randomized, open-label, two-period, crossover study in Pakistani subjects.

PubMed

Qayyum, Aisha; Najmi, Muzammil Hasan; Abbas, Mateen

2013-11-01

Comparative bioavailability studies are conducted to establish the bioequivalence of generic formulation with that of branded reference formulation, providing confidence to clinicians to use these products interchangeably. This study was carried out to compare a locally manufactured formulation of flurbiprofen with that of a branded product. Twenty two healthy male adults received a single dose of flurbiprofen (100mg) either generic or branded product according to randomization scheme on each of 2 periods. Blood samples were collected and plasma flurbiprofen concentration was determined by a validated HPLC method. Pharmacokinetic parameters like AUC(0-t), AUC(0-oo), Cmax, Tmax, t½, Vd and clearance were determined. The 90% CI for the ratio of geometric means of test to reference product's pharmacokinetic variables was calculated. Pharmacokinetic parameters for two formulations were comparable. Ratio of means of AUC(0-24), AUC(0-oo) and Cmax for test to reference products and 90% CI for these ratios were within the acceptable range. The p-values calculated by TOST were much less than the specified value (p-0.05). ANOVA gave p-values which were more than the specified value (p-0.05) for sequence, subject, period and formulation. Test formulation of flurbiprofen (tablet Flurso) was found to meet the criteria for bioequivalence to branded product (tablet Ansaid) based on pharmacokinetic parameters.

The development of a post-test diagnostic system for rocket engines

NASA Technical Reports Server (NTRS)

Zakrajsek, June F.

1991-01-01

An effort was undertaken by NASA to develop an automated post-test, post-flight diagnostic system for rocket engines. The automated system is designed to be generic and to automate the rocket engine data review process. A modular, distributed architecture with a generic software core was chosen to meet the design requirements. The diagnostic system is initially being applied to the Space Shuttle Main Engine data review process. The system modules currently under development are the session/message manager, and portions of the applications section, the component analysis section, and the intelligent knowledge server. An overview is presented of a rocket engine data review process, the design requirements and guidelines, the architecture and modules, and the projected benefits of the automated diagnostic system.

Model for macroevolutionary dynamics.

PubMed

Maruvka, Yosef E; Shnerb, Nadav M; Kessler, David A; Ricklefs, Robert E

2013-07-02

The highly skewed distribution of species among genera, although challenging to macroevolutionists, provides an opportunity to understand the dynamics of diversification, including species formation, extinction, and morphological evolution. Early models were based on either the work by Yule [Yule GU (1925) Philos Trans R Soc Lond B Biol Sci 213:21-87], which neglects extinction, or a simple birth-death (speciation-extinction) process. Here, we extend the more recent development of a generic, neutral speciation-extinction (of species)-origination (of genera; SEO) model for macroevolutionary dynamics of taxon diversification. Simulations show that deviations from the homogeneity assumptions in the model can be detected in species-per-genus distributions. The SEO model fits observed species-per-genus distributions well for class-to-kingdom-sized taxonomic groups. The model's predictions for the appearance times (the time of the first existing species) of the taxonomic groups also approximately match estimates based on molecular inference and fossil records. Unlike estimates based on analyses of phylogenetic reconstruction, fitted extinction rates for large clades are close to speciation rates, consistent with high rates of species turnover and the relatively slow change in diversity observed in the fossil record. Finally, the SEO model generally supports the consistency of generic boundaries based on morphological differences between species and provides a comparator for rates of lineage splitting and morphological evolution.

Evolution of the Generic Lock System at Jefferson Lab

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brian Bevins; Yves Roblin

2003-10-13

The Generic Lock system is a software framework that allows highly flexible feedback control of large distributed systems. It allows system operators to implement new feedback loops between arbitrary process variables quickly and with no disturbance to the underlying control system. Several different types of feedback loops are provided and more are being added. This paper describes the further evolution of the system since it was first presented at ICALEPCS 2001 and reports on two years of successful use in accelerator operations. The framework has been enhanced in several key ways. Multiple-input, multiple-output (MIMO) lock types have been added formore » accelerator orbit and energy stabilization. The general purpose Proportional-Integral-Derivative (PID) locks can now be tuned automatically. The generic lock server now makes use of the Proxy IOC (PIOC) developed at Jefferson Lab to allow the locks to be monitored from any EPICS Channel Access aware client. (Previously clients had to be Cdev aware.) The dependency on the Qt XML parser has been replaced with the freely available Xerces DOM parser from the Apache project.« less

A molecular phylogeny of Caraganeae (Leguminosae, Papilionoideae) reveals insights into new generic and infrageneric delimitations

PubMed Central

Duan, Lei; Yang, Xue; Liu, Peiliang; Johnson, Gabriel; Wen, Jun; Chang, Zhaoyang

2016-01-01

Abstract Based on sequence data of nuclear ITS and plastid matK, trnL-F and psbA-trnH markers, the phylogeny of the subtribes Caraganinae and Chesneyinae in tribe Caraganeae was inferred. The results support the monophyly of each of the subtribes. Within subtribes Caraganinae, Calophaca and Halimodendron are herein transferred into Caragana to ensure its generic monophyly. The subtribe Chesneyinae is composed of four well-supported genera: Chesneya, Chesniella, Gueldenstaedtia and Tibetia. Based on phylogenetic, morphological, distributional and habitat type evidence, the genus Chesneya was divided into three monophyletic sections: Chesneya sect. Chesneya, Chesneya sect. Pulvinatae and Chesneya sect. Spinosae. Chesneya macrantha is herein transferred into Chesniella. Spongiocarpella is polyphyletic and its generic rank is not maintained. The position of Chesneya was incongruent in the nuclear ITS and the plastid trees. A paternal chloroplast capture event via introgression is hypothesized for the origin of Chesneya, which is postulated to have involved the common ancestor of Chesniella (♂) and that of the Gueldenstaedtia – Tibetia (GUT) clade (♀) as the parents. PMID:27829801

Intrinsically Disordered Protein Specific Force Field CHARMM36IDPSFF.

PubMed

Liu, Hao; Song, Dong; Lu, Hui; Luo, Ray; Chen, Hai-Feng

2018-05-28

Intrinsically disordered proteins (IDPs) are closely related to various human diseases. Because IDPs lack certain tertiary structure, it is difficult to use X-ray and NMR methods to measure their structures. Therefore, molecular dynamics simulation is a useful tool to study the conformer distribution of IDPs. However, most generic protein force fields were found to be insufficient in simulations of IDPs. Here we report our development for the CHARMM community. Our residue-specific IDP force field (CHARMM36IDPSFF) was developed based on the base generic force field with CMAP corrections of for all 20 naturally occurring amino acids. Multiple tests show that the simulated chemical shifts with the newly developed force field are in quantitative agreement with NMR experiment and are more accurate than the base generic force field. Comparison of J-couplings with previous work shows that CHARMM36IDPSFF and its corresponding base generic force field have their own advantages. In addition, CHARMM36IDPSFF simulations also agree with experiment for SAXS profiles and radii of gyration of IDPs. Detailed analysis shows that CHARMM36IDPSFF can sample more diverse and disordered conformers. These findings confirm that the newly developed force field can improve the balance of accuracy and efficiency for the conformer sampling of IDPs. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Thermal Analysis of a Nuclear Waste Repository in Argillite Host Rock

NASA Astrophysics Data System (ADS)

Hadgu, T.; Gomez, S. P.; Matteo, E. N.

2017-12-01

Disposal of high-level nuclear waste in a geological repository requires analysis of heat distribution as a result of decay heat. Such an analysis supports design of repository layout to define repository footprint as well as provide information of importance to overall design. The analysis is also used in the study of potential migration of radionuclides to the accessible environment. In this study, thermal analysis for high-level waste and spent nuclear fuel in a generic repository in argillite host rock is presented. The thermal analysis utilized both semi-analytical and numerical modeling in the near field of a repository. The semi-analytical method looks at heat transport by conduction in the repository and surroundings. The results of the simulation method are temperature histories at selected radial distances from the waste package. A 3-D thermal-hydrologic numerical model was also conducted to study fluid and heat distribution in the near field. The thermal analysis assumed a generic geological repository at 500 m depth. For the semi-analytical method, a backfilled closed repository was assumed with basic design and material properties. For the thermal-hydrologic numerical method, a repository layout with disposal in horizontal boreholes was assumed. The 3-D modeling domain covers a limited portion of the repository footprint to enable a detailed thermal analysis. A highly refined unstructured mesh was used with increased discretization near heat sources and at intersections of different materials. All simulations considered different parameter values for properties of components of the engineered barrier system (i.e. buffer, disturbed rock zone and the host rock), and different surface storage times. Results of the different modeling cases are presented and include temperature and fluid flow profiles in the near field at different simulation times. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. SAND2017-8295 A.

Pharmacokinetics of experimental pentavalent antimony after intramuscular administration in adult volunteers.

PubMed

Vásquez, Laura; Scorza Dagert, José V; Scorza, José V; Vicuña-Fernández, Nelson; de Peña, Yaneira Petit; López, Sabrina; Bendezú, Herminia; Rojas, Elina; Vásquez, Libia; Pérez, Belén

2006-05-01

Pentavalent antimony (SbV) has demonstrated therapeuticeffectiveness against clinical manifestations of leishmaniasis, an infection caused by Leishmania, a genus of flagellate protozoa comprising parasites of worldwide distribution. Approximately 1.8 million new cases are reported annually. The aim of this study was to assess the pharmacokinetics of the investigational generic SbV, Ulamina (pentachloride of antimony + N-methylglucamine), in healthy adult volunteers. In this study, SbV was administered IM as a single 5-mg/kg dose.Blood samples were collected at 0.25, 0.75, 1, 2, 4, 8, 12, and 24 hours after administration; urine samples were collected at 6-hour intervals during the 24-hour postadministration period. Determination of trivalent antimony, SbV, and total antimony concentrations in blood and urine samples was carried out using atomic absorption spectrometry. Clinical history was reviewed and the subjects were monitored before and after administration of SbV using physical examination, weight, and hepatic- and renal-function studies. The pharmacokinetic parameters calculated were Cmax, Tmax, absorption constant (Ka), elimination constant (Kel), AUC2-24h, AUC0-∞, elimination phase (t½β), volume of distribution (Vd), and urinary excretion rate. Five subjects (3 men, 2 women; mean age, 28 years [range, 18-34 years]) were included in the study. One hour after drug administration the following values were obtained: Cmax, 1.1 μg/mL; Tmax, 1.3 hours; Ka, 1.87 hours; Kel, 0.043 hours; AUC0-24h, 12.26 μg/mL · h; AUC0-∞, 19.84 μg/mL · h; t½β, 17.45 hours; Vd, 6.6 L/kg; and urinary excretion rate, 2.8 μg/h; these were mean values for the entire study group. The single dose was well tolerated by all subjects. The investigational generic SbV, Ulamina, was associated with linearelimination after IM administration of a single 5-mg/kg dose. A 2-compartment pharmacokinetic model was observed in these volunteers; the mean t½β, was 17.45 hours and the mean Vd was 6.6 L/kg.

Exact infinite-time statistics of the Loschmidt echo for a quantum quench.

PubMed

Campos Venuti, Lorenzo; Jacobson, N Tobias; Santra, Siddhartha; Zanardi, Paolo

2011-07-01

The equilibration dynamics of a closed quantum system is encoded in the long-time distribution function of generic observables. In this Letter we consider the Loschmidt echo generalized to finite temperature, and show that we can obtain an exact expression for its long-time distribution for a closed system described by a quantum XY chain following a sudden quench. In the thermodynamic limit the logarithm of the Loschmidt echo becomes normally distributed, whereas for small quenches in the opposite, quasicritical regime, the distribution function acquires a universal double-peaked form indicating poor equilibration. These findings, obtained by a central limit theorem-type result, extend to completely general models in the small-quench regime.

Characterization, parameter estimation, and aircraft response statistics of atmospheric turbulence

NASA Technical Reports Server (NTRS)

Mark, W. D.

1981-01-01

A nonGaussian three component model of atmospheric turbulence is postulated that accounts for readily observable features of turbulence velocity records, their autocorrelation functions, and their spectra. Methods for computing probability density functions and mean exceedance rates of a generic aircraft response variable are developed using nonGaussian turbulence characterizations readily extracted from velocity recordings. A maximum likelihood method is developed for optimal estimation of the integral scale and intensity of records possessing von Karman transverse of longitudinal spectra. Formulas for the variances of such parameter estimates are developed. The maximum likelihood and least-square approaches are combined to yield a method for estimating the autocorrelation function parameters of a two component model for turbulence.

Measuring effective temperatures in a generalized Gibbs ensemble

DOE PAGES

Foini, Laura; Gambassi, Andrea; Konik, Robert; ...

2017-05-11

The local physical properties of an isolated quantum statistical system in the stationary state reached long after a quench are generically described by the Gibbs ensemble, which involves only its Hamiltonian and the temperature as a parameter. Additional quantities conserved by the dynamics intervene in the description of the stationary state, if the system is instead integrable. The resulting generalized Gibbs ensemble involves a number of temperature-like parameters, the determination of which is practically difficult. We argue that in a number of simple models these parameters can be effectively determined by using fluctuation-dissipation relationships between response and correlation functions ofmore » natural observables, quantities which are accessible in experiments.« less

Organizing Hazards, Engineering Disasters? Improving the Recognition of Political-Economic Factors in the Creation of Disasters

ERIC Educational Resources Information Center

Freudenburg, William R.; Gramling, Robert; Laska, Shirley; Erikson, Kai T.

2008-01-01

Disaster studies have made important progress in recognizing the unequally distributed consequences of disasters, but there has been less progress in analyzing social factors that help create "natural" disasters. Even well-known patterns of hazard-creation tend to be interpreted generically--as representing "economic development" or…

Monte Carlo Simulation to Estimate Likelihood of Direct Lightning Strikes

NASA Technical Reports Server (NTRS)

Mata, Carlos; Medelius, Pedro

2008-01-01

A software tool has been designed to quantify the lightning exposure at launch sites of the stack at the pads under different configurations. In order to predict lightning strikes to generic structures, this model uses leaders whose origins (in the x-y plane) are obtained from a 2D random, normal distribution.

New generic synonyms in the Palaeotropical genus Urothrips (Thysanoptera: Phlaeothripinae) with one new species from Seychelles.

PubMed

Ulitzka, Manfred R; Mound, Laurence A

2014-01-28

Urothrips kobroi sp. n. is described from Seychelles, and reasons are given for considering Biconothrips Stannard and Coxothrips Bournier as new synonyms of Urothrips Bagnall. This genus now includes nine species, distributed between Africa and Australia, and a key to these species is provided.

Measurements of forces, moments, and pressures on a generic store separating from a box cavity at supersonic speeds

NASA Technical Reports Server (NTRS)

Stallings, Robert L., Jr.; Wilcox, Floyd J., Jr.; Forrest, Dana K.

1991-01-01

An experimental investigation was conducted to measure the forces, moments, and pressure distributions on the generic store separating from a rectangular box cavity contained in a flat plate surface at supersonic speeds. Pressure distributions inside the cavity and oil flow and vapor-screen photographs of the cavity flow field were also obtained. The measurements were obtained for the store separating from a flat plate surface, from two shallow cavities having length to depth ratios (L/h) of 16.778 and 12.073, and from a deep cavity having L/h = 6.730. Measurements for the shallow cavities were obtained both with and without rectangular doors attached to sides of the cavities. The tests were conducted at free stream Mach numbers of 1.69, 2.00 and 2.65 for a free stream Reynolds number per foot of 2 x 10(exp 6). Presented here are a discussion of the results, a complete tabulation of the pressure data, figures of both the pressure and force and moment data, and representative oil flow and vapor screen photographs.

A generic rabies risk assessment tool to support surveillance.

PubMed

Ward, Michael P; Hernández-Jover, Marta

2015-06-01

The continued spread of rabies in Indonesia poses a risk to human and animal populations in the remaining free islands, as well as the neighbouring rabies-free countries of Timor Leste, Papua New Guinea and Australia. Here we describe the development of a generic risk assessment tool which can be used to rapidly determine the vulnerability of rabies-free islands, so that scarce resources can be targeted to surveillance activities and the sensitivity of surveillance systems increased. The tool was developed by integrating information on the historical spread of rabies, anthropological studies, and the opinions of local animal health experts. The resulting tool is based on eight critical parameters that can be estimated from the literature, expert opinion, observational studies and information generated from routine surveillance. In the case study presented, results generated by this tool were most sensitive to the probability that dogs are present on private and fishing boats and it was predicted that rabies-infection (one infected case) might occur in a rabies-free island (upper 95% prediction interval) with a volume of 1000 boats movements. With 25,000 boat movements, the median of the probability distribution would be equal to one infected case, with an upper 95% prediction interval of six infected cases. This tool could also be used at the national-level to guide control and eradication plans. An initial recommendation from this study is to develop a surveillance programme to determine the likelihood that boats transport dogs, for example by port surveillance or regularly conducted surveys of fisherman and passenger ferries. However, the illegal nature of dog transportation from rabies-infected to rabies-free islands is a challenge for developing such surveillance. Copyright © 2014 Elsevier B.V. All rights reserved.

Maxwell Strata and Cut Locus in the Sub-Riemannian Problem on the Engel Group

NASA Astrophysics Data System (ADS)

Ardentov, Andrei A.; Sachkov, Yuri L.

2017-12-01

We consider the nilpotent left-invariant sub-Riemannian structure on the Engel group. This structure gives a fundamental local approximation of a generic rank 2 sub-Riemannian structure on a 4-manifold near a generic point (in particular, of the kinematic models of a car with a trailer). On the other hand, this is the simplest sub-Riemannian structure of step three. We describe the global structure of the cut locus (the set of points where geodesics lose their global optimality), the Maxwell set (the set of points that admit more than one minimizer), and the intersection of the cut locus with the caustic (the set of conjugate points along all geodesics). The group of symmetries of the cut locus is described: it is generated by a one-parameter group of dilations R+ and a discrete group of reflections Z2 × Z2 × Z2. The cut locus admits a stratification with 6 three-dimensional strata, 12 two-dimensional strata, and 2 one-dimensional strata. Three-dimensional strata of the cut locus are Maxwell strata of multiplicity 2 (for each point there are 2 minimizers). Two-dimensional strata of the cut locus consist of conjugate points. Finally, one-dimensional strata are Maxwell strata of infinite multiplicity, they consist of conjugate points as well. Projections of sub-Riemannian geodesics to the 2-dimensional plane of the distribution are Euler elasticae. For each point of the cut locus, we describe the Euler elasticae corresponding to minimizers coming to this point. Finally, we describe the structure of the optimal synthesis, i. e., the set of minimizers for each terminal point in the Engel group.

Perpetual extraction of work from a nonequilibrium dynamical system under Markovian feedback control

NASA Astrophysics Data System (ADS)

Kosugi, Taichi

2013-09-01

By treating both control parameters and dynamical variables as probabilistic variables, we develop a succinct theory of perpetual extraction of work from a generic classical nonequilibrium system subject to a heat bath via repeated measurements under a Markovian feedback control. It is demonstrated that a problem for perpetual extraction of work in a nonequilibrium system is reduced to a problem of Markov chain in the higher-dimensional phase space. We derive a version of the detailed fluctuation theorem, which was originally derived for classical nonequilibrium systems by Horowitz and Vaikuntanathan [Phys. Rev. EPLEEE81539-375510.1103/PhysRevE.82.061120 82, 061120 (2010)], in a form suitable for the analyses of perpetual extraction of work. Since our theory is formulated for generic dynamics of probability distribution function in phase space, its application to a physical system is straightforward. As simple applications of the theory, two exactly solvable models are analyzed. The one is a nonequilibrium two-state system and the other is a particle confined to a one-dimensional harmonic potential in thermal equilibrium. For the former example, it is demonstrated that the observer on the transitory steps to the stationary state can lose energy and that work larger than that achieved in the stationary state can be extracted. For the latter example, it is demonstrated that the optimal protocol for the extraction of work via repeated measurements can differ from that via a single measurement. The validity of our version of the detailed fluctuation theorem, which determines the upper bound of the expected work in the stationary state, is also confirmed for both examples. These observations provide useful insights into exploration for realistic modeling of a machine that extracts work from its environment.

The Generic Short Patient Experiences Questionnaire (GS-PEQ): identification of core items from a survey in Norway

PubMed Central

2011-01-01

Background Questionnaires are commonly used to collect patient, or user, experiences with health care encounters; however, their adaption to specific target groups limits comparison between groups. We present the construction of a generic questionnaire (maximum of ten questions) for user evaluation across a range of health care services. Methods Based on previous testing of six group-specific questionnaires, we first constructed a generic questionnaire with 23 items related to user experiences. All questions included a "not applicable" response option, as well as a follow-up question about the item's importance. Nine user groups from one health trust were surveyed. Seven groups received questionnaires by mail and two by personal distribution. Selection of core questions was based on three criteria: applicability (proportion "not applicable"), importance (mean scores on follow-up questions), and comprehensiveness (content coverage, maximum two items per dimension). Results 1324 questionnaires were returned providing subsample sizes ranging from 52 to 323. Ten questions were excluded because the proportion of "not applicable" responses exceeded 20% in at least one user group. The number of remaining items was reduced to ten by applying the two other criteria. The final short questionnaire included items on outcome (2), clinician services (2), user involvement (2), incorrect treatment (1), information (1), organisation (1), and accessibility (1). Conclusion The Generic Short Patient Experiences Questionnaire (GS-PEQ) is a short, generic set of questions on user experiences with specialist health care that covers important topics for a range of groups. It can be used alone or with other instruments in quality assessment or in research. The psychometric properties and the relevance of the GS-PEQ in other health care settings and countries need further evaluation. PMID:21510871

Determinants of branded prescription medicine prices in OECD countries.

PubMed

Kanavos, Panos G; Vandoros, Sotiris

2011-07-01

This paper investigates the determinants of the prices of branded prescription medicines across different regulatory settings and health care systems, taking into account their launch date, patent status, market dynamics and the regulatory context in which they diffuse. By using volume-weighted price indices, this paper analyzes price levels for a basket of prescription medicines and their differences in 15 OECD countries, including the United States and key European countries, the impact of distribution margins and generic entry on public prices and to what extent innovation, by means of introducing newer classes of medicines, contributes to price formation across countries. In doing so, the paper seeks to understand the factors that contribute to the existing differences in prices across countries, whether at an ex-factory or a retail level. The evidence shows that retail prices for branded prescription medicines in the United States are higher than those in key European and other OECD countries, but not as high as widely thought. Large differences in prices are mainly observed at an ex-factory level, but these are not the prices that consumers and payers pay. Cross-country differences in retail prices are actually not as high as expected and, when controlling for exchange rates, these differences can be even smaller. Product age has a significant effect on prices in all settings after having controlled for other factors. Price convergence is observed across countries for newer prescription medicines compared with older medicines. There is no evidence that originator brand prices fall after generic entry in the United States, a phenomenon known as the 'generics paradox'. Finally, distribution and taxes are important determinants of retail prices in several of the study countries. To the extent that remuneration of the distribution chain and taxation are directly and proportionately linked to product prices this is likely to persist over time.

Generic phylogeny, historical biogeography and character evolution of the cosmopolitan aquatic plant family Hydrocharitaceae.

PubMed

Chen, Ling-Yun; Chen, Jin-Ming; Gituru, Robert Wahiti; Wang, Qing-Feng

2012-03-10

Hydrocharitaceae is a fully aquatic monocot family, consists of 18 genera with approximately 120 species. The family includes both fresh and marine aquatics and exhibits great diversity in form and habit including annual and perennial life histories; submersed, partially submersed and floating leaf habits and linear to orbicular leaf shapes. The family has a cosmopolitan distribution and is well represented in the Tertiary fossil record in Europe. At present, the historical biogeography of the family is not well understood and the generic relationships remain controversial. In this study we investigated the phylogeny and biogeography of Hydrocharitaceae by integrating fossils and DNA sequences from eight genes. We also conducted ancestral state reconstruction for three morphological characters. Phylogenetic analyses produced a phylogeny with most branches strongly supported by bootstrap values greater than 95 and Bayesian posterior probability values of 1.0. Stratiotes is the first diverging lineage with the remaining genera in two clades, one clade consists of Lagarosiphon, Ottelia, Blyxa, Apalanthe, Elodea and Egeria; and the other consists of Hydrocharis-Limnobium, Thalassia, Enhalus, Halophila, Najas, Hydrilla, Vallisneria, Nechamandra and Maidenia. Biogeographic analyses (DIVA, Mesquite) and divergence time estimates (BEAST) resolved the most recent common ancestor of Hydrocharitaceae as being in Asia during the Late Cretaceous and Palaeocene (54.7-72.6 Ma). Dispersals (including long-distance dispersal and migrations through Tethys seaway and land bridges) probably played major roles in the intercontinental distribution of this family. Ancestral state reconstruction suggested that in Hydrocharitaceae evolution of dioecy is bidirectional, viz., from dioecy to hermaphroditism, and from hermaphroditism to dioecy, and that the aerial-submerged leaf habit and short-linear leaf shape are the ancestral states. Our study has shed light on the previously controversial generic phylogeny of Hydrocharitaceae. The study has resolved the historical biogeography of this family and supported dispersal as the most likely explanation for the intercontinental distribution. We have also provided valuable information for understanding the evolution of breeding system and leaf phenotype in aquatic monocots.

Local spectrum analysis of field propagation in an anisotropic medium. Part I. Time-harmonic fields.

PubMed

Tinkelman, Igor; Melamed, Timor

2005-06-01

The phase-space beam summation is a general analytical framework for local analysis and modeling of radiation from extended source distributions. In this formulation, the field is expressed as a superposition of beam propagators that emanate from all points in the source domain and in all directions. In this Part I of a two-part investigation, the theory is extended to include propagation in anisotropic medium characterized by a generic wave-number profile for time-harmonic fields; in a companion paper [J. Opt. Soc. Am. A 22, 1208 (2005)], the theory is extended to time-dependent fields. The propagation characteristics of the beam propagators in a homogeneous anisotropic medium are considered. With use of Gaussian windows for the local processing of either ordinary or extraordinary electromagnetic field distributions, the field is represented by a phase-space spectral distribution in which the propagating elements are Gaussian beams that are formulated by using Gaussian plane-wave spectral distributions over the extended source plane. By applying saddle-point asymptotics, we extract the Gaussian beam phenomenology in the anisotropic environment. The resulting field is parameterized in terms of the spatial evolution of the beam curvature, beam width, etc., which are mapped to local geometrical properties of the generic wave-number profile. The general results are applied to the special case of uniaxial crystal, and it is found that the asymptotics for the Gaussian beam propagators, as well as the physical phenomenology attached, perform remarkably well.

Assessment of behavioral mechanisms maintaining encopresis: Virginia Encopresis-Constipation Apperception Test.

PubMed

Cox, Daniel J; Ritterband, Lee M; Quillian, Warren; Kovatchev, Boris; Morris, James; Sutphen, James; Borowitz, Stephen

2003-09-01

To develop and test a scale for parent and child, evaluating theoretical and clinical parameters relevant to children with encopresis. Encopretic children were hypothesized to have more bowel-specific, but not more generic, psychological problems, as compared with nonsymptomatic control children. In addition, mothers were also believed to be more discerning than children. The Virginia Encopresis-Constipation Apperception Test (VECAT) consists of 9 pairs of bowel-specific and 9 parallel generic drawings. Respondents selected the picture in each pair that best described them/their child. It was administered to encopretic children (N = 87), nonsymptomatic siblings (N = 27), and nonsymptomatic nonsiblings (N = 35). The mothers of all the participants also completed the VECAT. Encopretic children were retested 6 and 12 months posttreatment with Enhanced Toilet Training. The VECAT demonstrated good test-retest reliability and internal consistency. Encopretic children and their mothers reported more bowel-specific, but not more generic, problems. Bowel-specific scores improved significantly posttreatment only for those patients who demonstrated significant symptom improvement. Mothers were significantly more discerning than children. The VECAT is a reliable, valid, discriminating, and sensitive test. Bowel-specific problems appear to best differentiate children with and without encopresis.

Economic Models of Preventive Dentistry for Australian Children and Adolescents: A Systematic Review.

PubMed

Tonmukayakul, Utsana; Sia, Kah-Ling; Gold, Lisa; Hegde, Shalika; de Silva, Andrea M; Moodie, Marj

2015-01-01

To identify economic evaluation models and parameters that could be replicated or adapted to construct a generic model to assess cost-effectiveness of and prioritise a wide range of community-based oral disease prevention programmes in an Australian context. The literature search was conducted using MEDLINE, ERIC, PsycINFO, CINHAL (EBSCOhost), EMBASE (Ovid), CRD, DARE, NHSEED, HTA, all databases in the Cochrane library, Scopus and ScienceDirect databases from their inception to November 2012. Thirty-three articles met the criteria for inclusion in this review (7 were Australian studies, 26 articles were international). Existing models focused primarily on dental caries. Periodontal disease, another common oral health problem, was lacking. Among caries prevention studies, there was an absence of clear evidence showing continuous benefits from primary through to permanent dentition and the long-term effects of oral health promotion. No generic model was identified from previous studies that could be immediately adopted or adapted for our purposes of simulating and prioritising a diverse range of oral health interventions for Australian children and adolescents. Nevertheless, data sources specified in the existing Australian-based models will be useful for developing a generic model for such purposes.

Phase transitions in distributed control systems with multiplicative noise

NASA Astrophysics Data System (ADS)

Allegra, Nicolas; Bamieh, Bassam; Mitra, Partha; Sire, Clément

2018-01-01

Contemporary technological challenges often involve many degrees of freedom in a distributed or networked setting. Three aspects are notable: the variables are usually associated with the nodes of a graph with limited communication resources, hindering centralized control; the communication is subject to noise; and the number of variables can be very large. These three aspects make tools and techniques from statistical physics particularly suitable for the performance analysis of such networked systems in the limit of many variables (analogous to the thermodynamic limit in statistical physics). Perhaps not surprisingly, phase-transition like phenomena appear in these systems, where a sharp change in performance can be observed with a smooth parameter variation, with the change becoming discontinuous or singular in the limit of infinite system size. In this paper, we analyze the so called network consensus problem, prototypical of the above considerations, that has previously been analyzed mostly in the context of additive noise. We show that qualitatively new phase-transition like phenomena appear for this problem in the presence of multiplicative noise. Depending on dimensions, and on the presence or absence of a conservation law, the system performance shows a discontinuous change at a threshold value of the multiplicative noise strength. In the absence of the conservation law, and for graph spectral dimension less than two, the multiplicative noise threshold (the stability margin of the control problem) is zero. This is reminiscent of the absence of robust controllers for certain classes of centralized control problems. Although our study involves a ‘toy’ model, we believe that the qualitative features are generic, with implications for the robust stability of distributed control systems, as well as the effect of roundoff errors and communication noise on distributed algorithms.

Generic revision of the ant subfamily Dorylinae (Hymenoptera, Formicidae)

PubMed Central

Borowiec, Marek L.

2016-01-01

Abstract The generic classification of the ant subfamily Dorylinae is revised, with the aim of facilitating identification of easily-diagnosable monophyletic genera. The new classification is based on recent molecular phylogenetic evidence and a critical reappraisal of doryline morphology. New keys and diagnoses based on workers and males are provided, along with reviews of natural history and phylogenetic relationships, distribution maps, and a list of valid species for each lineage. Twenty-eight genera (27 extant and 1 extinct) are recognized within the subfamily, an increase from 20 in the previous classification scheme. Species classified in the polyphyletic Cerapachys and Sphinctomyrmex prior to this publication are here distributed among 9 and 3 different genera, respectively. Amyrmex and Asphinctanilloides are synonymized under Leptanilloides and the currently recognized subgenera are synonymized for Dorylus. No tribal classification is proposed for the subfamily, but several apparently monophyletic genus-groups are discussed. Valid generic names recognized here include: Acanthostichus (= Ctenopyga), Aenictogiton, Aenictus (= Paraenictus, Typhlatta), Cerapachys (= Ceratopachys), Cheliomyrmex, Chrysapace gen. rev., Cylindromyrmex (= Holcoponera, Hypocylindromyrmex, Metacylindromyrmex), Dorylus (= Alaopone syn. n., Anomma syn. n., Cosmaecetes, Dichthadia syn. n., Rhogmus syn. n., Shuckardia, Sphecomyrmex, Sphegomyrmex, Typhlopone syn. n.), Eburopone gen. n., Eciton (= Camptognatha, Holopone, Mayromyrmex), Eusphinctus gen. rev., Labidus (= Nycteresia, Pseudodichthadia), Leptanilloides (= Amyrmex syn. n., Asphinctanilloides syn. n.), Lioponera gen. rev. (= Neophyracaces syn. n., Phyracaces syn. n.), Lividopone, Neivamyrmex (= Acamatus, Woitkowskia), Neocerapachys gen. n., Nomamyrmex, Ooceraea gen. rev. (= Cysias syn. n.), Parasyscia gen. rev., †Procerapachys, Simopone, Sphinctomyrmex, Syscia gen. rev., Tanipone, Vicinopone, Yunodorylus gen. rev., Zasphinctus gen. rev. (= Aethiopopone syn. n., Nothosphinctus syn. n.). PMID:27559303

LOCALIZATION OF SHORT DURATION GRAVITATIONAL-WAVE TRANSIENTS WITH THE EARLY ADVANCED LIGO AND VIRGO DETECTORS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Essick, Reed; Vitale, Salvatore; Katsavounidis, Erik

2015-02-20

The Laser Interferometer Gravitational wave Observatory (LIGO) and Virgo advanced ground-based gravitational-wave detectors will begin collecting science data in 2015. With first detections expected to follow, it is important to quantify how well generic gravitational-wave transients can be localized on the sky. This is crucial for correctly identifying electromagnetic counterparts as well as understanding gravitational-wave physics and source populations. We present a study of sky localization capabilities for two search and parameter estimation algorithms: coherent WaveBurst, a constrained likelihood algorithm operating in close to real-time, and LALInferenceBurst, a Markov chain Monte Carlo parameter estimation algorithm developed to recover generic transientmore » signals with latency of a few hours. Furthermore, we focus on the first few years of the advanced detector era, when we expect to only have two (2015) and later three (2016) operational detectors, all below design sensitivity. These detector configurations can produce significantly different sky localizations, which we quantify in detail. We observe a clear improvement in localization of the average detected signal when progressing from two-detector to three-detector networks, as expected. Although localization depends on the waveform morphology, approximately 50% of detected signals would be imaged after observing 100-200 deg{sup 2} in 2015 and 60-110 deg{sup 2} in 2016, although knowledge of the waveform can reduce this to as little as 22 deg{sup 2}. This is the first comprehensive study on sky localization capabilities for generic transients of the early network of advanced LIGO and Virgo detectors, including the early LIGO-only two-detector configuration.« less

German dentists' websites on periodontitis have low quality of information.

PubMed

Schwendicke, Falk; Stange, Jörg; Stange, Claudia; Graetz, Christian

2017-08-02

The internet is an increasingly relevant source of health information. We aimed to assess the quality of German dentists' websites on periodontitis, hypothesizing that it was significantly associated with a number of practice-specific parameters. We searched four electronic search engines and included pages which were freely accessible, posted by a dental practice in Germany, and mentioned periodontal disease/therapy. Websites were assessed for (1) technical and functional aspects, (2) generic quality and risk of bias, (3) disease-specific information. For 1 and 2, validated tools (LIDA/DISCERN) were used for assessment. For 3, we developed a criterion catalogue encompassing items on etiologic and prognostic factors for periodontitis, the diagnostic and treatment process, and the generic chance of tooth retention in periodontitis patients. Inter- and intra-rater reliabilities were largely moderate. Generalized linear modeling was used to assess the association between the information quality (measured as % of maximally available scores) and practice-specific characteristics. Seventy-one websites were included. Technical and functional aspects were reported in significantly higher quality (median: 71%, 25/75th percentiles: 67/79%) than all other aspects (p < 0.05). Generic risk of bias and most disease-specific aspects showed significantly lower reporting quality (median range was 0-40%), with poorest reporting for prognostic factors (9;0/27%), diagnostic process (0;0/33%) and chances of tooth retention (0;0/2%). We found none of the practice-specific parameters to have significant impact on the overall quality of the websites. Most German dentists' websites on periodontitis are not fully trustworthy and relevant information are not or insufficiently considered. There is great need to improve the information quality from such websites at least with regards to periodontitis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ovchinnikov, Igor V.

Here, a scenario is proposed, according to which a generic self-organized critical (SOC) system can be looked upon as a Witten-type topological field theory (W-TFT) with spontaneously broken Becchi-Rouet-Stora-Tyutin (BRST) symmetry. One of the conditions for the SOC is the slow driving noise, which unambiguously suggests Stratonovich interpretation of the corresponding stochastic differential equation (SDE). This, in turn, necessitates the use of Parisi-Sourlas-Wu stochastic quantization procedure, which straightforwardly leads to a model with BRST-exact action, i.e., to a W-TFT. In the parameter space of the SDE, there must exist full-dimensional regions where the BRST symmetry is spontaneously broken by instantons,more » which in the context of SOC are essentially avalanches. In these regions, the avalanche-type SOC dynamics is liberated from overwise a rightful dynamics-less W-TFT, and a Goldstone mode of Fadeev-Popov ghosts exists. Goldstinos represent moduli of instantons (avalanches) and being gapless are responsible for the critical avalanche distribution in the low-energy, long-wavelength limit. The above arguments are robust against moderate variations of the SDE's parameters and the criticality is 'self-tuned'. The proposition of this paper suggests that the machinery of W-TFTs may find its applications in many different areas of modern science studying various physical realizations of SOC. It also suggests that there may in principle exist a connection between some SOC's and the concept of topological quantum computing.« less

Malware distributed collection and pre-classification system using honeypot technology

NASA Astrophysics Data System (ADS)

Grégio, André R. A.; Oliveira, Isabela L.; Santos, Rafael D. C.; Cansian, Adriano M.; de Geus, Paulo L.

2009-04-01

Malware has become a major threat in the last years due to the ease of spread through the Internet. Malware detection has become difficult with the use of compression, polymorphic methods and techniques to detect and disable security software. Those and other obfuscation techniques pose a problem for detection and classification schemes that analyze malware behavior. In this paper we propose a distributed architecture to improve malware collection using different honeypot technologies to increase the variety of malware collected. We also present a daemon tool developed to grab malware distributed through spam and a pre-classification technique that uses antivirus technology to separate malware in generic classes.

Chaos in generically coupled phase oscillator networks with nonpairwise interactions.

PubMed

Bick, Christian; Ashwin, Peter; Rodrigues, Ana

2016-09-01

The Kuramoto-Sakaguchi system of coupled phase oscillators, where interaction between oscillators is determined by a single harmonic of phase differences of pairs of oscillators, has very simple emergent dynamics in the case of identical oscillators that are globally coupled: there is a variational structure that means the only attractors are full synchrony (in-phase) or splay phase (rotating wave/full asynchrony) oscillations and the bifurcation between these states is highly degenerate. Here we show that nonpairwise coupling-including three and four-way interactions of the oscillator phases-that appears generically at the next order in normal-form based calculations can give rise to complex emergent dynamics in symmetric phase oscillator networks. In particular, we show that chaos can appear in the smallest possible dimension of four coupled phase oscillators for a range of parameter values.

Chaos in generically coupled phase oscillator networks with nonpairwise interactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bick, Christian; Ashwin, Peter; Rodrigues, Ana

The Kuramoto–Sakaguchi system of coupled phase oscillators, where interaction between oscillators is determined by a single harmonic of phase differences of pairs of oscillators, has very simple emergent dynamics in the case of identical oscillators that are globally coupled: there is a variational structure that means the only attractors are full synchrony (in-phase) or splay phase (rotating wave/full asynchrony) oscillations and the bifurcation between these states is highly degenerate. Here we show that nonpairwise coupling—including three and four-way interactions of the oscillator phases—that appears generically at the next order in normal-form based calculations can give rise to complex emergent dynamicsmore » in symmetric phase oscillator networks. In particular, we show that chaos can appear in the smallest possible dimension of four coupled phase oscillators for a range of parameter values.« less

A black hole with torsion in 5D Lovelock gravity

NASA Astrophysics Data System (ADS)

Cvetković, B.; Simić, D.

2018-03-01

We analyze static spherically symmetric solutions of five dimensional (5D) Lovelock gravity in the first order formulation. In the Riemannian sector, when torsion vanishes, the Boulware–Deser black hole represents a unique static spherically symmetric black hole solution for the generic choice of the Lagrangian parameters. We show that a special choice of the Lagrangian parameters, different from the Lovelock Chern–Simons gravity, leads to the existence of a static black hole solution with torsion, the metric of which is asymptotically anti-de Sitter (AdS). We calculate the conserved charges and thermodynamical quantities of this black hole solution.

Digital robust active control law synthesis for large order flexible structure using parameter optimization

NASA Technical Reports Server (NTRS)

Mukhopadhyay, V.

1988-01-01

A generic procedure for the parameter optimization of a digital control law for a large-order flexible flight vehicle or large space structure modeled as a sampled data system is presented. A linear quadratic Guassian type cost function was minimized, while satisfying a set of constraints on the steady-state rms values of selected design responses, using a constrained optimization technique to meet multiple design requirements. Analytical expressions for the gradients of the cost function and the design constraints on mean square responses with respect to the control law design variables are presented.

Elliptic Painlevé equations from next-nearest-neighbor translations on the E_8^{(1)} lattice

NASA Astrophysics Data System (ADS)

Joshi, Nalini; Nakazono, Nobutaka

2017-07-01

The well known elliptic discrete Painlevé equation of Sakai is constructed by a standard translation on the E_8(1) lattice, given by nearest neighbor vectors. In this paper, we give a new elliptic discrete Painlevé equation obtained by translations along next-nearest-neighbor vectors. This equation is a generic (8-parameter) version of a 2-parameter elliptic difference equation found by reduction from Adler’s partial difference equation, the so-called Q4 equation. We also provide a projective reduction of the well known equation of Sakai.

Mass tracking and material accounting in the integral fast reactor (IFR)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orechwa, Y.; Adams, C.H.; White, A.M.

1991-01-01

This paper reports on the Integral Fast Reactor (IFR) which is a generic advanced liquid metal cooled reactor concept being developed at Argonne National Laboratory. There are a number of technical features of the IFR which contribute to its potential as a next-generation reactor. These are associated with large safety margins with regard to off-normal events involving the heat transport system, and the use of metallic fuel which makes possible the utilization of innovative fuel cycle processes. The latter feature permits fuel cycle closure with compact, low-cost reprocessing facilities, collocated with the reactor plant. These primary features are being demonstratedmore » in the facilities at ANL-West, utilizing Experimental Breeder Reactor II and the associated Fuel Cycle Facility (FCF) as an IFR prototype. The demonstration of this IFR prototype includes the design and implementation of the Mass-tracking System (MTG). In this system, data from the operations of the FCF, including weights and batch-process parameters, are collected and maintained by the MTG running on distributed workstations.« less

Spatial solitons and stability in the one-dimensional and the two-dimensional generalized nonlinear Schrödinger equation with fourth-order diffraction and parity-time-symmetric potentials

NASA Astrophysics Data System (ADS)

Tiofack, C. G. L.; Ndzana, F., II; Mohamadou, A.; Kofane, T. C.

2018-03-01

We investigate the existence and stability of solitons in parity-time (PT )-symmetric optical media characterized by a generic complex hyperbolic refractive index distribution and fourth-order diffraction (FOD). For the linear case, we demonstrate numerically that the FOD parameter can alter the PT -breaking points. For nonlinear cases, the exact analytical expressions of the localized modes are obtained both in one- and two-dimensional nonlinear Schrödinger equations with self-focusing and self-defocusing Kerr nonlinearity. The effect of FOD on the stability structure of these localized modes is discussed with the help of linear stability analysis followed by the direct numerical simulation of the governing equation. Examples of stable and unstable solutions are given. The transverse power flow density associated with these localized modes is also discussed. It is found that the relative strength of the FOD coefficient can utterly change the direction of the power flow, which may be used to control the energy exchange among gain or loss regions.

Sensory optimization by stochastic tuning.

PubMed

Jurica, Peter; Gepshtein, Sergei; Tyukin, Ivan; van Leeuwen, Cees

2013-10-01

Individually, visual neurons are each selective for several aspects of stimulation, such as stimulus location, frequency content, and speed. Collectively, the neurons implement the visual system's preferential sensitivity to some stimuli over others, manifested in behavioral sensitivity functions. We ask how the individual neurons are coordinated to optimize visual sensitivity. We model synaptic plasticity in a generic neural circuit and find that stochastic changes in strengths of synaptic connections entail fluctuations in parameters of neural receptive fields. The fluctuations correlate with uncertainty of sensory measurement in individual neurons: The higher the uncertainty the larger the amplitude of fluctuation. We show that this simple relationship is sufficient for the stochastic fluctuations to steer sensitivities of neurons toward a characteristic distribution, from which follows a sensitivity function observed in human psychophysics and which is predicted by a theory of optimal allocation of receptive fields. The optimal allocation arises in our simulations without supervision or feedback about system performance and independently of coupling between neurons, making the system highly adaptive and sensitive to prevailing stimulation. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Distribution of Bell-inequality violation versus multiparty-quantum-correlation measures

NASA Astrophysics Data System (ADS)

Sharma, Kunal; Das, Tamoghna; Sen (de), Aditi; Sen, Ujjwal

Violation of a Bell inequality guarantees the existence of quantum correlations in a shared quantum state. A pure bipartite quantum state, having nonvanishing quantum correlation, always violates a Bell inequality. Such correspondence is absent for multipartite pure quantum states in the case of multipartite correlation function Bell inequalities with two settings at each site. We establish a connection between the monogamy of Bell-inequality violation and multiparty quantum correlations for shared multisite quantum states. We believe that the relation is generic, as it is true for a number of different multisite measures that are defined from radically different perspectives. Precisely, we quantify the multisite-quantum-correlation content in the states by generalized geometric measure, a genuine multisite entanglement measure, as well as three monogamybased multiparty-quantum-correlation measures, viz., 3-tangle, quantum-discord score, and quantum-work-deficit score. We find that generalized Greenberger-Horne-Zeilinger states and another single-parameter family of states, which we refer to as the special Greenberger-Horne-Zeilinger states, have the status of extremal states in such relations.

Factors affecting economies of scale in combined sewer systems.

PubMed

Maurer, Max; Wolfram, Martin; Anja, Herlyn

2010-01-01

A generic model is introduced that represents the combined sewer infrastructure of a settlement quantitatively. A catchment area module first calculates the length and size distribution of the required sewer pipes on the basis of rain patterns, housing densities and area size. These results are fed into the sewer-cost module in order to estimate the combined sewer costs of the entire catchment area. A detailed analysis of the relevant input parameters for Swiss settlements is used to identify the influence of size on costs. The simulation results confirm that an economy of scale exists for combined sewer systems. This is the result of two main opposing cost factors: (i) increased construction costs for larger sewer systems due to larger pipes and increased rain runoff in larger settlements, and (ii) lower costs due to higher population and building densities in larger towns. In Switzerland, the more or less organically grown settlement structures and limited land availability emphasise the second factor to show an apparent economy of scale. This modelling approach proved to be a powerful tool for understanding the underlying factors affecting the cost structure for water infrastructures.

Distribution of Bell-inequality violation versus multiparty-quantum-correlation measures

NASA Astrophysics Data System (ADS)

Sharma, Kunal; Das, Tamoghna; SenDe, Aditi; Sen, Ujjwal

2016-06-01

Violation of a Bell inequality guarantees the existence of quantum correlations in a shared quantum state. A pure bipartite quantum state, having nonvanishing quantum correlation, always violates a Bell inequality. Such correspondence is absent for multipartite pure quantum states in the case of multipartite correlation function Bell inequalities with two settings at each site. We establish a connection between the monogamy of Bell-inequality violation and multiparty quantum correlations for shared multisite quantum states. We believe that the relation is generic, as it is true for a number of different multisite measures that are defined from radically different perspectives. Precisely, we quantify the multisite-quantum-correlation content in the states by generalized geometric measure, a genuine multisite entanglement measure, as well as three monogamy-based multiparty-quantum-correlation measures, viz., 3-tangle, quantum-discord score, and quantum-work-deficit score. We find that generalized Greenberger-Horne-Zeilinger states and another single-parameter family of states, which we refer to as the special Greenberger-Horne-Zeilinger states, have the status of extremal states in such relations.

Quantum quench in a p+ip superfluid: Winding numbers and topological states far from equilibrium

NASA Astrophysics Data System (ADS)

Foster, Matthew S.; Dzero, Maxim; Gurarie, Victor; Yuzbashyan, Emil A.

2013-09-01

We study the nonadiabatic dynamics of a two-dimensional p+ip superfluid following an instantaneous quantum quench of the BCS coupling constant. The model describes a topological superconductor with a nontrivial BCS (trivial BEC) phase appearing at weak- (strong-) coupling strengths. We extract the exact long-time asymptotics of the order parameter Δ(t) by exploiting the integrability of the classical p-wave Hamiltonian, which we establish via a Lax construction. Three different types of asymptotic behavior can occur depending upon the strength and direction of the interaction quench. We refer to these as the nonequilibrium phases {I, II, III}, characterized as follows. In phase I, the order parameter asymptotes to zero due to dephasing. In phase II, Δ→Δ∞, a nonzero constant. Phase III is characterized by persistent oscillations of Δ(t). For quenches within phases I and II, we determine the topological character of the asymptotic states. We show that two different formulations of the bulk topological winding number, although equivalent in the BCS or BEC ground states, must be regarded as independent out of equilibrium. The first winding number Q characterizes the Anderson pseudospin texture of the initial state; we show that Q is generically conserved. For Q≠0, this leads to the prediction of a “gapless topological” state when Δ asymptotes to zero. The presence or absence of Majorana edge modes in a sample with a boundary is encoded in the second winding number W, which is formulated in terms of the retarded Green's function. We establish that W can change following a quench across the quantum critical point. When the order parameter asymptotes to a nonzero constant, the final value of W is well defined and quantized. We discuss the implications for the (dis)appearance of Majorana edge modes. Finally, we show that the parity of zeros in the bulk out-of-equilibrium Cooper-pair distribution function constitutes a Z2-valued quantum number, which is nonzero whenever W≠Q. The pair distribution can in principle be measured using rf spectroscopy in an ultracold-atom realization, allowing direct experimental detection of the Z2 number. This has the following interesting implication: topological information that is experimentally inaccessible in the bulk ground state can be transferred to an observable distribution function when the system is driven far from equilibrium.

Therapeutic Equivalence Requires Pharmaceutical, Pharmacokinetic, and Pharmacodynamic Identities: True Bioequivalence of a Generic Product of Intravenous Metronidazole

PubMed Central

Agudelo, M.

2012-01-01

Animal models of infection have been used to demonstrate the therapeutic failure of “bioequivalent” generic products, but their applicability for this purpose requires the accurate identification of those products that are truly bioequivalent. Here, we present data comparing one intravenous generic product of metronidazole with the innovator product in a neutropenic mouse thigh anaerobic infection model. Simultaneous experiments allowed comparisons (generic versus innovator) of potency and the concentration of the active pharmaceutical ingredient (API), analytical chemistry (liquid chromatography/mass spectrometry [LC/MS]), in vitro susceptibility testing, single-dose serum pharmacokinetics (PK) in infected mice, and in vivo pharmacodynamics (PD) against Bacteroides fragilis ATCC 25825 in synergy with Escherichia coli SIG-1 in the neutropenic mouse thigh anaerobic infection model. The Hill dose-response model followed by curve-fitting analysis was used to calculate and compare primary and secondary PD parameters. The generic and the innovator products were identical in terms of the concentration and potency of the API, chromatographic and spectrographic profiles, MIC and minimal bactericidal concentrations (MBC) (2.0 mg/liter), and mouse PK. We found no differences between products in bacteriostatic doses (BD) (15 to 22 mg/kg of body weight per day) or the doses needed to kill 1 log (1LKD) (21 to 29 mg/kg per day) or 2 logs (2LKD) (28 to 54 mg/kg per day) of B. fragilis under dosing schedules of every 12 h (q12h), q8h, or q6h. The area under the concentration-time curve over 24 h in the steady state divided by the MIC (AUC/MIC ratio) was the best PD index to predict the antibacterial efficacy of metronidazole (adjusted coefficient of determination [AdjR2] = 84.6%), and its magnitude to reach bacteriostasis in vivo (56.6 ± 5.17 h) or to kill the first (90.8 ± 9.78 h) and second (155.5 ± 22.2 h) logs was the same for both products. Animal models of infection allow a thorough demonstration of the therapeutic equivalence of generic antimicrobials. PMID:22330928

The manufacture of generic replicas of implants for arthroplasty of the hip and knee: is it regulated and will it save money?

PubMed

Atrey, A; Heylen, S; Gosling, O; Porteous, M J L; Haddad, F S

2016-07-01

Joint replacement of the hip and knee remain very satisfactory operations. They are, however, expensive. The actual manufacturing of the implant represents only 30% of the final cost, while sales and marketing represent 40%. Recently, the patents on many well established and successful implants have expired. Companies have started producing and distributing implants that purport to replicate existing implants with good long-term results. The aims of this paper are to assess the legality, the monitoring and cost saving implications of such generic implants. We also assess how this might affect the traditional orthopaedic implant companies. Cite this article: Bone Joint J 2016;98-B:892-900. ©2016 The British Editorial Society of Bone & Joint Surgery.

Loads and Performance Data from a Wind-Tunnel Test of Generic Model Helicopter Rotor Blades

NASA Technical Reports Server (NTRS)

Yeager, William T., Jr.; Wilbur, Matthew L.

2005-01-01

An investigation was conducted in the NASA Langley Transonic Dynamics Tunnel to acquire data for use in assessing the ability of current and future comprehensive analyses to predict helicopter rotating-system and fixed-system vibratory loads. The investigation was conducted with a generic model helicopter rotor system using blades with rectangular planform, no built-in twist, uniform radial distribution of mass and stiffnesses, and a NACA 0012 airfoil section. Rotor performance data, as well as mean and vibratory components of blade bending and torsion moments, fixed-system forces and moments, and pitch link loads were obtained at advance ratios up to 0.35 for various combinations of rotor shaft angle-of-attack and collective pitch. The data are presented without analysis.

Experimental study of a generic high-speed civil transport

NASA Technical Reports Server (NTRS)

Belton, Pamela S.; Campbell, Richard L.

1992-01-01

An experimental study of generic high-speed civil transport was conducted in the NASA Langley 8-ft Transonic Pressure Tunnel. The data base was obtained for the purpose of assessing the accuracy of various levels of computational analysis. Two models differing only in wingtip geometry were tested with and without flow-through nacelles. The baseline model has a curved or crescent wingtip shape, while the second model has a more conventional straight wingtip shape. The study was conducted at Mach numbers from 0.30 to 1.19. Force data were obtained on both the straight wingtip model and the curved wingtip model. Only the curved wingtip model was instrumented for measuring pressures. Selected longitudinal, lateral, and directional data are presented for both models. Selected pressure distributions for the curved wingtip model are also presented.

The Instant Glidein; A generic approach for the late binding of jobs to various resource types

NASA Astrophysics Data System (ADS)

Field, Laurence; Steers, Iain

2017-10-01

High-throughput computing requires resources to be allocated so that jobs can be run. In a highly distributed environment that may be comprised of multiple levels of queueing, it may not be certain where, what and when jobs will run. It is therefore desirable to first acquire the resource before assigning it a job. This late binding approach has been implemented in resources managed by batch systems using the pilot jobs paradigm, with the HTCondor glidein being a reference implementation. For resources that are managed by other means such as the IaaS, alternative approaches for late binding may be required. This contribution describes one such approach, the instant glidein, as a generic method for implementing late binding to various resource types.

Parameter identification for nonlinear aerodynamic systems

NASA Technical Reports Server (NTRS)

Pearson, Allan E.

1990-01-01

Parameter identification for nonlinear aerodynamic systems is examined. It is presumed that the underlying model can be arranged into an input/output (I/O) differential operator equation of a generic form. The algorithm estimation is especially efficient since the equation error can be integrated exactly given any I/O pair to obtain an algebraic function of the parameters. The algorithm for parameter identification was extended to the order determination problem for linear differential system. The degeneracy in a least squares estimate caused by feedback was addressed. A method of frequency analysis for determining the transfer function G(j omega) from transient I/O data was formulated using complex valued Fourier based modulating functions in contrast with the trigonometric modulating functions for the parameter estimation problem. A simulation result of applying the algorithm is given under noise-free conditions for a system with a low pass transfer function.

A New Formulation of the Filter-Error Method for Aerodynamic Parameter Estimation in Turbulence

NASA Technical Reports Server (NTRS)

Grauer, Jared A.; Morelli, Eugene A.

2015-01-01

A new formulation of the filter-error method for estimating aerodynamic parameters in nonlinear aircraft dynamic models during turbulence was developed and demonstrated. The approach uses an estimate of the measurement noise covariance to identify the model parameters, their uncertainties, and the process noise covariance, in a relaxation method analogous to the output-error method. Prior information on the model parameters and uncertainties can be supplied, and a post-estimation correction to the uncertainty was included to account for colored residuals not considered in the theory. No tuning parameters, needing adjustment by the analyst, are used in the estimation. The method was demonstrated in simulation using the NASA Generic Transport Model, then applied to the subscale T-2 jet-engine transport aircraft flight. Modeling results in different levels of turbulence were compared with results from time-domain output error and frequency- domain equation error methods to demonstrate the effectiveness of the approach.

Comparison of Outcomes Following a Switch From a Brand to an Authorized Versus Independent Generic Drug.

PubMed

Hansen, R A; Qian, J; Berg, R L; Linneman, J G; Seoane-Vazquez, E; Dutcher, S; Raofi, S; Page, C D; Peissig, P L

2018-02-01

Authorized generics are identical in formulation to brand drugs, manufactured by the brand company but marketed as a generic. Generics, marketed by generic manufacturers, are required to demonstrate pharmaceutical and bioequivalence to the brand drug, but repetition of clinical trials is not required. This retrospective cohort study compared outcomes for generics and authorized generics, which serves as a generic vs. brand proxy that minimizes bias against generics. For the seven drugs studied between 1999 and 2014, 5,234 unique patients were on brand drugs prior to generic entry and 4,900 (93.6%) switched to a generic. During the 12 months following the brand-to-generic switch, patients using generics vs. authorized generics were similar in terms of outpatient visits, urgent care visits, hospitalizations, and medication discontinuation. The likelihood of emergency department (ED) visits was slightly higher for authorized generics compared with generics. These data suggest that generics were clinically no worse than their proxy brand comparators. © 2017 American Society for Clinical Pharmacology and Therapeutics.

GridPV Toolbox

DOE Office of Scientific and Technical Information (OSTI.GOV)

Broderick, Robert; Quiroz, Jimmy; Grijalva, Santiago

2014-07-15

Matlab Toolbox for simulating the impact of solar energy on the distribution grid. The majority of the functions are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving GridPV Toolbox information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in the OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feeder on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions.

A random matrix approach to credit risk.

PubMed

Münnix, Michael C; Schäfer, Rudi; Guhr, Thomas

2014-01-01

We estimate generic statistical properties of a structural credit risk model by considering an ensemble of correlation matrices. This ensemble is set up by Random Matrix Theory. We demonstrate analytically that the presence of correlations severely limits the effect of diversification in a credit portfolio if the correlations are not identically zero. The existence of correlations alters the tails of the loss distribution considerably, even if their average is zero. Under the assumption of randomly fluctuating correlations, a lower bound for the estimation of the loss distribution is provided.

A Random Matrix Approach to Credit Risk

PubMed Central

Guhr, Thomas

2014-01-01

We estimate generic statistical properties of a structural credit risk model by considering an ensemble of correlation matrices. This ensemble is set up by Random Matrix Theory. We demonstrate analytically that the presence of correlations severely limits the effect of diversification in a credit portfolio if the correlations are not identically zero. The existence of correlations alters the tails of the loss distribution considerably, even if their average is zero. Under the assumption of randomly fluctuating correlations, a lower bound for the estimation of the loss distribution is provided. PMID:24853864

Guidelines for Implementing Advanced Distribution Management Systems-Requirements for DMS Integration with DERMS and Microgrids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jianhui; Chen, Chen; Lu, Xiaonan

2015-08-01

This guideline focuses on the integration of DMS with DERMS and microgrids connected to the distribution grid by defining generic and fundamental design and implementation principles and strategies. It starts by addressing the current status, objectives, and core functionalities of each system, and then discusses the new challenges and the common principles of DMS design and implementation for integration with DERMS and microgrids to realize enhanced grid operation reliability and quality power delivery to consumers while also achieving the maximum energy economics from the DER and microgrid connections.

Common Accounting System for Monitoring the ATLAS Distributed Computing Resources

NASA Astrophysics Data System (ADS)

Karavakis, E.; Andreeva, J.; Campana, S.; Gayazov, S.; Jezequel, S.; Saiz, P.; Sargsyan, L.; Schovancova, J.; Ueda, I.; Atlas Collaboration

2014-06-01

This paper covers in detail a variety of accounting tools used to monitor the utilisation of the available computational and storage resources within the ATLAS Distributed Computing during the first three years of Large Hadron Collider data taking. The Experiment Dashboard provides a set of common accounting tools that combine monitoring information originating from many different information sources; either generic or ATLAS specific. This set of tools provides quality and scalable solutions that are flexible enough to support the constantly evolving requirements of the ATLAS user community.

Statistical thermodynamics of clustered populations.

PubMed

Matsoukas, Themis

2014-08-01

We present a thermodynamic theory for a generic population of M individuals distributed into N groups (clusters). We construct the ensemble of all distributions with fixed M and N, introduce a selection functional that embodies the physics that governs the population, and obtain the distribution that emerges in the scaling limit as the most probable among all distributions consistent with the given physics. We develop the thermodynamics of the ensemble and establish a rigorous mapping to regular thermodynamics. We treat the emergence of a so-called giant component as a formal phase transition and show that the criteria for its emergence are entirely analogous to the equilibrium conditions in molecular systems. We demonstrate the theory by an analytic model and confirm the predictions by Monte Carlo simulation.

Bifurcation Phenomena of Opinion Dynamics in Complex Networks

NASA Astrophysics Data System (ADS)

Guo, Long; Cai, Xu

In this paper, we study the opinion dynamics of Improved Deffuant model (IDM), where the convergence parameter μ is a function of the opposite’s degree K according to the celebrity effect, in small-world network (SWN) and scale-free network (SFN). Generically, the system undergoes a phase transition from the plurality state to the polarization state and to the consensus state as the confidence parameter ɛ increasing. Furthermore, the evolution of the steady opinion s * as a function of ɛ, and the relation between the minority steady opinion s_{*}^{min} and the individual connectivity k also have been analyzed. Our present work shows the crucial role of the confidence parameter and the complex system topology in the opinion dynamics of IDM.

LHC constraints on color octet scalars

NASA Astrophysics Data System (ADS)

Hayreter, Alper; Valencia, German

2017-08-01

We extract constraints on the parameter space of the Manohar and Wise model by comparing the cross sections for dijet, top-pair, dijet-pair, t t ¯t t ¯ and b b ¯b b ¯ productions at the LHC with the strongest available experimental limits from ATLAS or CMS at 8 or 13 TeV. Overall we find mass limits around 1 TeV in the most sensitive regions of parameter space, and lower elsewhere. This is at odds with generic limits for color octet scalars often quoted in the literature where much larger production cross sections are assumed. The constraints that can be placed on coupling constants are typically weaker than those from existing theoretical considerations, with the exception of the parameter ηD.

Optimization of liquid scintillation measurements applied to smears and aqueous samples collected in industrial environments

NASA Astrophysics Data System (ADS)

Chapon, Arnaud; Pigrée, Gilbert; Putmans, Valérie; Rogel, Gwendal

Search for low-energy β contaminations in industrial environments requires using Liquid Scintillation Counting. This indirect measurement method supposes a fine control from sampling to measurement itself. Thus, in this paper, we focus on the definition of a measurement method, as generic as possible, for both smears and aqueous samples' characterization. That includes choice of consumables, sampling methods, optimization of counting parameters and definition of energy windows, using the maximization of a Figure of Merit. Detection limits are then calculated considering these optimized parameters. For this purpose, we used PerkinElmer Tri-Carb counters. Nevertheless, except those relative to some parameters specific to PerkinElmer, most of the results presented here can be extended to other counters.

surrkick: Black-hole kicks from numerical-relativity surrogate models

NASA Astrophysics Data System (ADS)

Gerosa, Davide; Hébert, François; Stein, Leo C.

2018-04-01

surrkick quickly and reliably extract recoils imparted to generic, precessing, black hole binaries. It uses a numerical-relativity surrogate model to obtain the gravitational waveform given a set of binary parameters, and from this waveform directly integrates the gravitational-wave linear momentum flux. This entirely bypasses the need of fitting formulae which are typically used to model black-hole recoils in astrophysical contexts.

Chemical freezeout parameters within generic nonextensive statistics

NASA Astrophysics Data System (ADS)

Tawfik, Abdel; Yassin, Hayam; Abo Elyazeed, Eman R.

2018-06-01

The particle production in relativistic heavy-ion collisions seems to be created in a dynamically disordered system which can be best described by an extended exponential entropy. In distinguishing between the applicability of this and Boltzmann-Gibbs (BG) in generating various particle-ratios, generic (non)extensive statistics is introduced to the hadron resonance gas model. Accordingly, the degree of (non)extensivity is determined by the possible modifications in the phase space. Both BG extensivity and Tsallis nonextensivity are included as very special cases defined by specific values of the equivalence classes (c, d). We found that the particle ratios at energies ranging between 3.8 and 2760 GeV are best reproduced by nonextensive statistics, where c and d range between ˜ 0.9 and ˜ 1 . The present work aims at illustrating that the proposed approach is well capable to manifest the statistical nature of the system on interest. We don't aim at highlighting deeper physical insights. In other words, while the resulting nonextensivity is neither BG nor Tsallis, the freezeout parameters are found very compatible with BG and accordingly with the well-known freezeout phase-diagram, which is in an excellent agreement with recent lattice calculations. We conclude that the particle production is nonextensive but should not necessarily be accompanied by a radical change in the intensive or extensive thermodynamic quantities, such as internal energy and temperature. Only, the two critical exponents defining the equivalence classes (c, d) are the physical parameters characterizing the (non)extensivity.

Testing backreaction effects with observational Hubble parameter data

NASA Astrophysics Data System (ADS)

Cao, Shu-Lei; Teng, Huan-Yu; Wan, Hao-Yi; Yu, Hao-Ran; Zhang, Tong-Jie

2018-02-01

The spatially averaged inhomogeneous Universe includes a kinematical backreaction term Q_{D} that is relate to the averaged spatial Ricci scalar _{D} in the framework of general relativity. Under the assumption that Q_{D} and < R > _{D} obey the scaling laws of the volume scale factor a_{D}, a direct coupling between them with a scaling index n is remarkable. In order to explore the generic properties of a backreaction model for explaining the accelerated expansion of the Universe, we exploit two metrics to describe the late time Universe. Since the standard FLRW metric cannot precisely describe the late time Universe on small scales, the template metric with an evolving curvature parameter κ _{D}(t) is employed. However, we doubt the validity of the prescription for κ _{D}, which motivates us apply observational Hubble parameter data (OHD) to constrain parameters in dust cosmology. First, for FLRW metric, by getting best-fit constraints of Ω^{D_0}_m = 0.25^{+0.03}_{-0.03}, n = 0.02^{+0.69}_{-0.66}, and H_{D_0} = 70.54^{+4.24}_{-3.97} km s^{-1 Mpc^{-1}}, the evolutions of parameters are explored. Second, in template metric context, by marginalizing over H_{D_0} as a prior of uniform distribution, we obtain the best-fit values of n=-1.22^{+0.68}_{-0.41} and Ωm^{D0}=0.12^{+0.04}_{-0.02}. Moreover, we utilize three different Gaussian priors of H_{D_0}, which result in different best-fits of n, but almost the same best-fit value of Ωm^{D0}˜ 0.12. Also, the absolute constraints without marginalization of parameter are obtained: n=-1.1^{+0.58}_{-0.50} and Ωm^{D0}=0.13± 0.03. With these constraints, the evolutions of the effective deceleration parameter q^{D} indicate that the backreaction can account for the accelerated expansion of the Universe without involving extra dark energy component in the scaling solution context. Nevertheless, the results also verify that the prescription of κ _{D} is insufficient and should be improved.

A generic set of HF antennas for use with spherical model expansions

NASA Astrophysics Data System (ADS)

Katal, Nedim

1990-03-01

An antenna engineering handbook and database program has been constructed by engineers at the Lawrence Livermore National Laboratory (LLNL) using the Numerical Electromagnetics Code (NEC) antenna modeling program to prepare data performance on tactical field communication antennas used by the Army. It is desirable to have this information installed on a personnel computer (PC), using relational database techniques to select antennas based on performance criteria. This thesis obtains and analyses current distributions and radiation pattern data by using NEC for the following set of four (4) high frequency (HF) tactical generic antennas to be used in future spherical mode expansion work: a quarter wavelength basic whip, a one-wavelength horizontal quad Loop, a 564-foot longwire, and a sloping vee beam dipole. The results of this study show that the basic whip antenna provides good groundwave communication, but it has poor near vertical incident skywave (NVIS) performance. The current distribution has the characteristics of standing waves. The horizontal quad loop antenna is good for night vision imaging systems (NVIS) and medium range skywave communications. The current distribution is sinusoidal and continuous around the loop. The long wire antenna allows short, medium and long range communications and a standing wave current distribution occurs along the antenna axis due to non-termination. The sloping vee beam antenna favors long range communication and the current distribution is mainly that of travelling sinusoidal waves. Because of their well-known efficiency, the basic whip and quad loop can be used as reference standards for the spherical mode expansion work. The longwire and sloping vee beam antenna are unwieldy, but they are effective as base station antennas.

Comparison of generic-to-brand switchback patterns for generic and authorized generic drugs

PubMed Central

Hansen, Richard A.; Qian, Jingjing; Berg, Richard; Linneman, James; Seoane-Vazquez, Enrique; Dutcher, Sarah K.; Raofi, Saeid; Page, C. David; Peissig, Peggy

2018-01-01

Background While generic drugs are therapeutically equivalent to brand drugs, some patients and healthcare providers remain uncertain about whether they produce identical outcomes. Authorized generics, which are identical in formulation to corresponding brand drugs but marketed as a generic, provide a unique post-marketing opportunity to study whether utilization patterns are influenced by perceptions of generic drugs. Objectives To compare generic-to-brand switchback rates between generics and authorized generics. Methods A retrospective cohort study was conducted using claims and electronic health records data from a regional U.S. healthcare system. Ten drugs with authorized generics and generics marketed between 1999 and 2014 were evaluated. Eligible adult patients received a brand drug during the 6 months preceding generic entry, and then switched to a generic or authorized generic. Patients in this cohort were followed for up to 30 months from the index switch date to evaluate occurrence of generic-to-brand switchbacks. Switchback rates were compared between patients on authorized generics versus generics using Kaplan-Meier curves and Cox proportional hazards models, controlling for individual drug effects, age, sex, Charlson comorbidity score, pre-index drug use characteristics, and pre-index healthcare utilization. Results Among 5,542 unique patients that switched from brand-to-generic or brand-to-authorized generic, 264 (4.8%) switched back to the brand drug. Overall switchback rates were similar for authorized generics compared with generics (HR=0.86; 95% CI 0.65-1.15). The likelihood of switchback was higher for alendronate (HR=1.64; 95% CI 1.20-2.23) and simvastatin (HR=1.81; 95% CI 1.30-2.54) and lower for amlodipine (HR=0.27; 95% CI 0.17-0.42) compared with other drugs in the cohort. Conclusions Overall switchback rates were similar between authorized generic and generic drug users, indirectly supporting similar efficacy and tolerability profiles for brand and generic drugs. Reasons for differences in switchback rates among specific products need to be further explored. PMID:28152215

Optimization of the reconstruction parameters in [123I]FP-CIT SPECT

NASA Astrophysics Data System (ADS)

Niñerola-Baizán, Aida; Gallego, Judith; Cot, Albert; Aguiar, Pablo; Lomeña, Francisco; Pavía, Javier; Ros, Domènec

2018-04-01

The aim of this work was to obtain a set of parameters to be applied in [123I]FP-CIT SPECT reconstruction in order to minimize the error between standardized and true values of the specific uptake ratio (SUR) in dopaminergic neurotransmission SPECT studies. To this end, Monte Carlo simulation was used to generate a database of 1380 projection data-sets from 23 subjects, including normal cases and a variety of pathologies. Studies were reconstructed using filtered back projection (FBP) with attenuation correction and ordered subset expectation maximization (OSEM) with correction for different degradations (attenuation, scatter and PSF). Reconstruction parameters to be optimized were the cut-off frequency of a 2D Butterworth pre-filter in FBP, and the number of iterations and the full width at Half maximum of a 3D Gaussian post-filter in OSEM. Reconstructed images were quantified using regions of interest (ROIs) derived from Magnetic Resonance scans and from the Automated Anatomical Labeling map. Results were standardized by applying a simple linear regression line obtained from the entire patient dataset. Our findings show that we can obtain a set of optimal parameters for each reconstruction strategy. The accuracy of the standardized SUR increases when the reconstruction method includes more corrections. The use of generic ROIs instead of subject-specific ROIs adds significant inaccuracies. Thus, after reconstruction with OSEM and correction for all degradations, subject-specific ROIs led to errors between standardized and true SUR values in the range [‑0.5, +0.5] in 87% and 92% of the cases for caudate and putamen, respectively. These percentages dropped to 75% and 88% when the generic ROIs were used.

Cost-effectiveness of hepatitis C treatment using generic direct-acting antivirals available in India

PubMed Central

Aggarwal, Rakesh; Chen, Qiushi; Goel, Amit; Seguy, Nicole; Pendse, Razia; Ayer, Turgay

2017-01-01

Background & aims Availability of directly-acting antivirals (DAAs) has changed the treatment landscape of hepatitis C virus (HCV) infection. The high price of DAAs has restricted their use in several countries. However, in some countries such as India, generic DAAs are available at much cheaper price. This study examined whether generic DAAs could be cost-saving and how long it would take for the treatment to become cost-saving/effective. Methods A previously-validated, mathematical model was adapted to the HCV-infected population in India to compare the outcomes of no treatment versus treatment with DAAs. Model parameters were estimated from published studies. Cost-effectiveness of HCV treatment using available DAAs was calculated, using a payer’s perspective. We estimated quality-adjusted life years (QALYs), disability-adjusted life years (DALYs), total costs, and incremental cost-effectiveness ratio of DAAs versus no treatment. One-way and probabilistic sensitivity analyses were conducted. Results Compared with no treatment, the use of generic DAAs in Indian HCV patients would increase the life expectancy by 8.02 years, increase QALYs by 3.89, avert 19.07 DALYs, and reduce the lifetime healthcare costs by $1,309 per-person treated. Treatment became cost-effective within 2 years, and cost-saving within 10 years of its initiation overall and within 5 years in persons with cirrhosis. Treating 10,000 HCV-infected persons could prevent 3400–3850 decompensated cirrhosis, 1800–2500 HCC, and 4000–4550 liver-related deaths. The results were sensitive to the costs of DAAs, pre- and post-treatment diagnostic tests and management of cirrhosis, and quality of life after sustained virologic response. Conclusions Treatment with generic DAAs available in India will improve patient outcomes, provide a good value for money within 2 years, and be ultimately cost-saving. Therefore, in this and similar settings, HCV treatment should be a priority from a public health as well an economic perspective. PMID:28520728

Cost-effectiveness of hepatitis C treatment using generic direct-acting antivirals available in India.

PubMed

Aggarwal, Rakesh; Chen, Qiushi; Goel, Amit; Seguy, Nicole; Pendse, Razia; Ayer, Turgay; Chhatwal, Jagpreet

2017-01-01

Availability of directly-acting antivirals (DAAs) has changed the treatment landscape of hepatitis C virus (HCV) infection. The high price of DAAs has restricted their use in several countries. However, in some countries such as India, generic DAAs are available at much cheaper price. This study examined whether generic DAAs could be cost-saving and how long it would take for the treatment to become cost-saving/effective. A previously-validated, mathematical model was adapted to the HCV-infected population in India to compare the outcomes of no treatment versus treatment with DAAs. Model parameters were estimated from published studies. Cost-effectiveness of HCV treatment using available DAAs was calculated, using a payer's perspective. We estimated quality-adjusted life years (QALYs), disability-adjusted life years (DALYs), total costs, and incremental cost-effectiveness ratio of DAAs versus no treatment. One-way and probabilistic sensitivity analyses were conducted. Compared with no treatment, the use of generic DAAs in Indian HCV patients would increase the life expectancy by 8.02 years, increase QALYs by 3.89, avert 19.07 DALYs, and reduce the lifetime healthcare costs by $1,309 per-person treated. Treatment became cost-effective within 2 years, and cost-saving within 10 years of its initiation overall and within 5 years in persons with cirrhosis. Treating 10,000 HCV-infected persons could prevent 3400-3850 decompensated cirrhosis, 1800-2500 HCC, and 4000-4550 liver-related deaths. The results were sensitive to the costs of DAAs, pre- and post-treatment diagnostic tests and management of cirrhosis, and quality of life after sustained virologic response. Treatment with generic DAAs available in India will improve patient outcomes, provide a good value for money within 2 years, and be ultimately cost-saving. Therefore, in this and similar settings, HCV treatment should be a priority from a public health as well an economic perspective.

Validation of the Korean version of the pediatric quality of life inventory 4.0 (PedsQL) generic core scales in school children and adolescents using the Rasch model.

PubMed

Kook, Seung Hee; Varni, James W

2008-06-02

The Pediatric Quality of Life Inventory (PedsQL) is a child self-report and parent proxy-report instrument designed to assess health-related quality of life (HRQOL) in healthy and ill children and adolescents. It has been translated into over 70 international languages and proposed as a valid and reliable pediatric HRQOL measure. This study aimed to assess the psychometric properties of the Korean translation of the PedsQL 4.0 Generic Core Scales. Following the guidelines for linguistic validation, the original US English scales were translated into Korean and cognitive interviews were administered. The field testing responses of 1425 school children and adolescents and 1431 parents to the Korean version of PedsQL 4.0 Generic Core Scales were analyzed utilizing confirmatory factor analysis and the Rasch model. Consistent with studies using the US English instrument and other translation studies, score distributions were skewed toward higher HRQOL in a predominantly healthy population. Confirmatory factor analysis supported a four-factor and a second order-factor model. The analysis using the Rasch model showed that person reliabilities are low, item reliabilities are high, and the majority of items fit the model's expectation. The Rasch rating scale diagnostics showed that PedsQL 4.0 Generic Core Scales in general have the optimal number of response categories, but category 4 (almost always a problem) is somewhat problematic for the healthy school sample. The agreements between child self-report and parent proxy-report were moderate. The results demonstrate the feasibility, validity, item reliability, item fit, and agreement between child self-report and parent proxy-report of the Korean version of PedsQL 4.0 Generic Core Scales for school population health research in Korea. However, the utilization of the Korean version of the PedsQL 4.0 Generic Core Scales for healthy school populations needs to consider low person reliability, ceiling effects and cultural differences, and further validation studies on Korean clinical samples are required.

Generic Amplicon Deep Sequencing to Determine Ilarvirus Species Diversity in Australian Prunus

PubMed Central

Kinoti, Wycliff M.; Constable, Fiona E.; Nancarrow, Narelle; Plummer, Kim M.; Rodoni, Brendan

2017-01-01

The distribution of Ilarvirus species populations amongst 61 Australian Prunus trees was determined by next generation sequencing (NGS) of amplicons generated using a genus-based generic RT-PCR targeting a conserved region of the Ilarvirus RNA2 component that encodes the RNA dependent RNA polymerase (RdRp) gene. Presence of Ilarvirus sequences in each positive sample was further validated by Sanger sequencing of cloned amplicons of regions of each of RNA1, RNA2 and/or RNA3 that were generated by species specific PCRs and by metagenomic NGS. Prunus necrotic ringspot virus (PNRSV) was the most frequently detected Ilarvirus, occurring in 48 of the 61 Ilarvirus-positive trees and Prune dwarf virus (PDV) and Apple mosaic virus (ApMV) were detected in three trees and one tree, respectively. American plum line pattern virus (APLPV) was detected in three trees and represents the first report of APLPV detection in Australia. Two novel and distinct groups of Ilarvirus-like RNA2 amplicon sequences were also identified in several trees by the generic amplicon NGS approach. The high read depth from the amplicon NGS of the generic PCR products allowed the detection of distinct RNA2 RdRp sequence variant populations of PNRSV, PDV, ApMV, APLPV and the two novel Ilarvirus-like sequences. Mixed infections of ilarviruses were also detected in seven Prunus trees. Sanger sequencing of specific RNA1, RNA2, and/or RNA3 genome segments of each virus and total nucleic acid metagenomics NGS confirmed the presence of PNRSV, PDV, ApMV and APLPV detected by RNA2 generic amplicon NGS. However, the two novel groups of Ilarvirus-like RNA2 amplicon sequences detected by the generic amplicon NGS could not be associated to the presence of sequence from RNA1 or RNA3 genome segments or full Ilarvirus genomes, and their origin is unclear. This work highlights the sensitivity of genus-specific amplicon NGS in detection of virus sequences and their distinct populations in multiple samples, and the need for a standardized approach to accurately determine what constitutes an active, viable virus infection after detection by molecular based methods. PMID:28713347

Generic Amplicon Deep Sequencing to Determine Ilarvirus Species Diversity in Australian Prunus.

PubMed

Kinoti, Wycliff M; Constable, Fiona E; Nancarrow, Narelle; Plummer, Kim M; Rodoni, Brendan

2017-01-01

The distribution of Ilarvirus species populations amongst 61 Australian Prunus trees was determined by next generation sequencing (NGS) of amplicons generated using a genus-based generic RT-PCR targeting a conserved region of the Ilarvirus RNA2 component that encodes the RNA dependent RNA polymerase (RdRp) gene. Presence of Ilarvirus sequences in each positive sample was further validated by Sanger sequencing of cloned amplicons of regions of each of RNA1, RNA2 and/or RNA3 that were generated by species specific PCRs and by metagenomic NGS. Prunus necrotic ringspot virus (PNRSV) was the most frequently detected Ilarvirus , occurring in 48 of the 61 Ilarvirus -positive trees and Prune dwarf virus (PDV) and Apple mosaic virus (ApMV) were detected in three trees and one tree, respectively. American plum line pattern virus (APLPV) was detected in three trees and represents the first report of APLPV detection in Australia. Two novel and distinct groups of Ilarvirus -like RNA2 amplicon sequences were also identified in several trees by the generic amplicon NGS approach. The high read depth from the amplicon NGS of the generic PCR products allowed the detection of distinct RNA2 RdRp sequence variant populations of PNRSV, PDV, ApMV, APLPV and the two novel Ilarvirus -like sequences. Mixed infections of ilarviruses were also detected in seven Prunus trees. Sanger sequencing of specific RNA1, RNA2, and/or RNA3 genome segments of each virus and total nucleic acid metagenomics NGS confirmed the presence of PNRSV, PDV, ApMV and APLPV detected by RNA2 generic amplicon NGS. However, the two novel groups of Ilarvirus -like RNA2 amplicon sequences detected by the generic amplicon NGS could not be associated to the presence of sequence from RNA1 or RNA3 genome segments or full Ilarvirus genomes, and their origin is unclear. This work highlights the sensitivity of genus-specific amplicon NGS in detection of virus sequences and their distinct populations in multiple samples, and the need for a standardized approach to accurately determine what constitutes an active, viable virus infection after detection by molecular based methods.

Technology-Enhanced Interactive Teaching of Marginal, Joint and Conditional Probabilities: The Special Case of Bivariate Normal Distribution

ERIC Educational Resources Information Center

Dinov, Ivo D.; Kamino, Scott; Bhakhrani, Bilal; Christou, Nicolas

2013-01-01

Data analysis requires subtle probability reasoning to answer questions like "What is the chance of event A occurring, given that event B was observed?" This generic question arises in discussions of many intriguing scientific questions such as "What is the probability that an adolescent weighs between 120 and 140 pounds given that…

Aerodynamic design of electric and hybrid vehicles: A guidebook

NASA Technical Reports Server (NTRS)

Kurtz, D. W.

1980-01-01

A typical present-day subcompact electric hybrid vehicle (EHV), operating on an SAE J227a D driving cycle, consumes up to 35% of its road energy requirement overcoming aerodynamic resistance. The application of an integrated system design approach, where drag reduction is an important design parameter, can increase the cycle range by more than 15%. This guidebook highlights a logic strategy for including aerodynamic drag reduction in the design of electric and hybrid vehicles to the degree appropriate to the mission requirements. Backup information and procedures are included in order to implement the strategy. Elements of the procedure are based on extensive wind tunnel tests involving generic subscale models and full-scale prototype EHVs. The user need not have any previous aerodynamic background. By necessity, the procedure utilizes many generic approximations and assumptions resulting in various levels of uncertainty. Dealing with these uncertainties, however, is a key feature of the strategy.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadgu, Teklu; Matteo, Edward N.

An example case is presented for testing analytical thermal models. The example case represents thermal analysis of a generic repository in bedded salt at 500 m depth. The analysis is part of the study reported in Matteo et al. (2016). Ambient average ground surface temperature of 15°C, and a natural geothermal gradient of 25°C/km, were assumed to calculate temperature at the near field. For generic salt repository concept crushed salt backfill is assumed. For the semi-analytical analysis crushed salt thermal conductivity of 0.57 W/m-K was used. With time the crushed salt is expected to consolidate into intact salt. In thismore » study a backfill thermal conductivity of 3.2 W/m-K (same as intact) is used for sensitivity analysis. Decay heat data for SRS glass is given in Table 1. The rest of the parameter values are shown below. Results of peak temperatures at the waste package surface are given in Table 2.« less

Energy use in the marine transportation industry. Task III. Efficiency improvements. Draft report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-06-02

Research and development areas that hold promise for maritime energy conservation are identified and evaluated. The methodology used is discussed in Chapter II. The technology base of the commercial marine transportation industry relating to energy usage is made up of: main propulsion plants, propulsors, hydrodynamics, vessel operations, and fuels. Fifteen specific program areas in the first four generic technologies are identified and are evaluated. An economic and energy impact analysis and technological risk assessment was performed on the specific program areas and the results are summarized in Chapter III. The first five appendices address the generic technologies. The sixth appendixmore » contains the baseline operating and cost parameters against which the 15 program areas were evaluated, and the last appendix contains sample printouts of the MTEM model used to evaluate the energy consumption and economic impacts associated with the candidate technology areas. (MCW)« less

Artificial intelligence in a mission operations and satellite test environment

NASA Technical Reports Server (NTRS)

Busse, Carl

1988-01-01

A Generic Mission Operations System using Expert System technology to demonstrate the potential of Artificial Intelligence (AI) automated monitor and control functions in a Mission Operations and Satellite Test environment will be developed at the National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory (JPL). Expert system techniques in a real time operation environment are being studied and applied to science and engineering data processing. Advanced decommutation schemes and intelligent display technology will be examined to develop imaginative improvements in rapid interpretation and distribution of information. The Generic Payload Operations Control Center (GPOCC) will demonstrate improved data handling accuracy, flexibility, and responsiveness in a complex mission environment. The ultimate goal is to automate repetitious mission operations, instrument, and satellite test functions by the applications of expert system technology and artificial intelligence resources and to enhance the level of man-machine sophistication.

Synopsis of the cyclocephaline scarab beetles (Coleoptera, Scarabaeidae, Dynastinae)

PubMed Central

Moore, Matthew R.; Cave, Ronald D.; Branham, Marc A.

2018-01-01

Abstract The cyclocephaline scarabs (Scarabaeidae: Dynastinae: Cyclocephalini) are a speciose tribe of beetles that include species that are ecologically and economically important as pollinators and pests of agriculture and turf. We provide an overview and synopsis of the 14 genera of Cyclocephalini that includes information on: 1) the taxonomic and nomenclatural history of the group; 2) diagnosis and identification of immature life-stages; 3) economic importance in agroecosystems; 4) natural enemies of these beetles; 5) use as food by humans; 6) the importance of adults as pollination mutualists; 7) fossil cyclocephalines and the evolution of the group; 8) generic-level identification of adults. We provide an expanded identification key to genera of world Cyclocephalini and diagnoses for each genus. Character illustrations and generic-level distribution maps are provided along with discussions on the relationships of the tribe’s genera. PMID:29670448

Synopsis of the cyclocephaline scarab beetles (Coleoptera, Scarabaeidae, Dynastinae).

PubMed

Moore, Matthew R; Cave, Ronald D; Branham, Marc A

2018-01-01

The cyclocephaline scarabs (Scarabaeidae: Dynastinae: Cyclocephalini) are a speciose tribe of beetles that include species that are ecologically and economically important as pollinators and pests of agriculture and turf. We provide an overview and synopsis of the 14 genera of Cyclocephalini that includes information on: 1) the taxonomic and nomenclatural history of the group; 2) diagnosis and identification of immature life-stages; 3) economic importance in agroecosystems; 4) natural enemies of these beetles; 5) use as food by humans; 6) the importance of adults as pollination mutualists; 7) fossil cyclocephalines and the evolution of the group; 8) generic-level identification of adults. We provide an expanded identification key to genera of world Cyclocephalini and diagnoses for each genus. Character illustrations and generic-level distribution maps are provided along with discussions on the relationships of the tribe's genera.

Authorized generic drugs, price competition, and consumers' welfare.

PubMed

Berndt, Ernst R; Mortimer, Richard; Bhattacharjya, Ashoke; Parece, Andrew; Tuttle, Edward

2007-01-01

The growing frequency of authorized generics has important implications for the welfare of prescription drug consumers. Authorized generic entry could affect the timing of generic entry, brand-name and generic prices, and generic penetration. We reviewed 1999-2003 data and found that generic entry in the absence of short-run exclusivity restrictions benefits consumers through lower short-run prices. We suggest that these benefits likely also result from authorized generics. We posit that long-run prices and shares are likely essentially unaffected by authorized generics and that potential costs to consumers from any delayed generic entry are likely small.

Some properties of a 5-parameter bivariate probability distribution

NASA Technical Reports Server (NTRS)

Tubbs, J. D.; Brewer, D. W.; Smith, O. E.

1983-01-01

A five-parameter bivariate gamma distribution having two shape parameters, two location parameters and a correlation parameter was developed. This more general bivariate gamma distribution reduces to the known four-parameter distribution. The five-parameter distribution gives a better fit to the gust data. The statistical properties of this general bivariate gamma distribution and a hypothesis test were investigated. Although these developments have come too late in the Shuttle program to be used directly as design criteria for ascent wind gust loads, the new wind gust model has helped to explain the wind profile conditions which cause large dynamic loads. Other potential applications of the newly developed five-parameter bivariate gamma distribution are in the areas of reliability theory, signal noise, and vibration mechanics.

Efficient patient modeling for visuo-haptic VR simulation using a generic patient atlas.

PubMed

Mastmeyer, Andre; Fortmeier, Dirk; Handels, Heinz

2016-08-01

This work presents a new time-saving virtual patient modeling system by way of example for an existing visuo-haptic training and planning virtual reality (VR) system for percutaneous transhepatic cholangio-drainage (PTCD). Our modeling process is based on a generic patient atlas to start with. It is defined by organ-specific optimized models, method modules and parameters, i.e. mainly individual segmentation masks, transfer functions to fill the gaps between the masks and intensity image data. In this contribution, we show how generic patient atlases can be generalized to new patient data. The methodology consists of patient-specific, locally-adaptive transfer functions and dedicated modeling methods such as multi-atlas segmentation, vessel filtering and spline-modeling. Our full image volume segmentation algorithm yields median DICE coefficients of 0.98, 0.93, 0.82, 0.74, 0.51 and 0.48 regarding soft-tissue, liver, bone, skin, blood and bile vessels for ten test patients and three selected reference patients. Compared to standard slice-wise manual contouring time saving is remarkable. Our segmentation process shows out efficiency and robustness for upper abdominal puncture simulation systems. This marks a significant step toward establishing patient-specific training and hands-on planning systems in a clinical environment. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Monte Carlo simulations for generic granite repository studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chu, Shaoping; Lee, Joon H; Wang, Yifeng

In a collaborative study between Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL) for the DOE-NE Office of Fuel Cycle Technologies Used Fuel Disposition (UFD) Campaign project, we have conducted preliminary system-level analyses to support the development of a long-term strategy for geologic disposal of high-level radioactive waste. A general modeling framework consisting of a near- and a far-field submodel for a granite GDSE was developed. A representative far-field transport model for a generic granite repository was merged with an integrated systems (GoldSim) near-field model. Integrated Monte Carlo model runs with the combined near- and farfield transport modelsmore » were performed, and the parameter sensitivities were evaluated for the combined system. In addition, a sub-set of radionuclides that are potentially important to repository performance were identified and evaluated for a series of model runs. The analyses were conducted with different waste inventory scenarios. Analyses were also conducted for different repository radionuelide release scenarios. While the results to date are for a generic granite repository, the work establishes the method to be used in the future to provide guidance on the development of strategy for long-term disposal of high-level radioactive waste in a granite repository.« less

The Communicative Participation Item Bank (CPIB): Item bank calibration and development of a disorder-generic short form

PubMed Central

Baylor, Carolyn; Yorkston, Kathryn; Eadie, Tanya; Kim, Jiseon; Chung, Hyewon; Amtmann, Dagmar

2015-01-01

Purpose The purpose of this study was to calibrate the items for the Communicative Participation Item Bank (CPIB) using Item Response Theory (IRT). One overriding objective was to examine if the IRT item parameters would be consistent across different diagnostic groups, thereby allowing creation of a disorder-generic instrument. The intended outcomes were the final item bank and a short form ready for clinical and research applications. Methods Self-report data were collected from 701 individuals representing four diagnoses: multiple sclerosis, Parkinson’s disease, amyotrophic lateral sclerosis and head and neck cancer. Participants completed the CPIB and additional self-report questionnaires. CPIB data were analyzed using the IRT Graded Response Model (GRM). Results The initial set of 94 candidate CPIB items were reduced to an item bank of 46 items demonstrating unidimensionality, local independence, good item fit, and good measurement precision. Differential item function (DIF) analyses detected no meaningful differences across diagnostic groups. A 10-item, disorder-generic short form was generated. Conclusions The CPIB provides speech-language pathologists with a unidimensional, self-report outcomes measurement instrument dedicated to the construct of communicative participation. This instrument may be useful to clinicians and researchers wanting to implement measures of communicative participation in their work. PMID:23816661

Refinement and evaluation of helicopter real-time self-adaptive active vibration controller algorithms

NASA Technical Reports Server (NTRS)

Davis, M. W.

1984-01-01

A Real-Time Self-Adaptive (RTSA) active vibration controller was used as the framework in developing a computer program for a generic controller that can be used to alleviate helicopter vibration. Based upon on-line identification of system parameters, the generic controller minimizes vibration in the fuselage by closed-loop implementation of higher harmonic control in the main rotor system. The new generic controller incorporates a set of improved algorithms that gives the capability to readily define many different configurations by selecting one of three different controller types (deterministic, cautious, and dual), one of two linear system models (local and global), and one or more of several methods of applying limits on control inputs (external and/or internal limits on higher harmonic pitch amplitude and rate). A helicopter rotor simulation analysis was used to evaluate the algorithms associated with the alternative controller types as applied to the four-bladed H-34 rotor mounted on the NASA Ames Rotor Test Apparatus (RTA) which represents the fuselage. After proper tuning all three controllers provide more effective vibration reduction and converge more quickly and smoothly with smaller control inputs than the initial RTSA controller (deterministic with external pitch-rate limiting). It is demonstrated that internal limiting of the control inputs a significantly improves the overall performance of the deterministic controller.

Resonant tidal excitation of planetary atmospheres and an explanation for the jets on Jupiter and Saturn

NASA Astrophysics Data System (ADS)

Tyler, R.

2017-12-01

Resonant tidal excitation of an atmosphere will arrive in predictable situations where there is a match in form and frequency between tidal forces and the atmosphere's eigenmodes of oscillation. The resonant response is typically several orders of magnitude more energetic than in non-resonant configurations involving only slight differences in parameters, and the behavior can be quite different because different oscillation modes are favored in each. The work presented provides first a generic description of these resonant states by demonstrating the behavior of solutions within the very large parameter space of potential scenarios. This generic description of the range of atmospheric tidal response scenarios is further used to create a taxonomy for organizing and understanding various tidally driven dynamic regimes. The resonances are easily identified by associated peaks in the power. But because these peaks may be relatively narrow, millions of solutions can be required to complete the description of the solution's dependence over the range of parameter values. (Construction of these large solution spaces is performed using a fast, semi-analytical method that solves the forced, dissipative, Laplace Tidal Equations subject to the constraint of dynamical consistency (through a separation constant) with solutions describing the vertical structure.) Filling in the solution space in this way is used not only to locate the parameter coordinates of resonant scenarios but also to study allowed migration paths through this space. It is suggested that resonant scenarios do not arrive through happenstance but rather because secular variations in parameters make the configuration move into the resonant scenario, with associated feedbacks either accelerating or halting the configuration migration. These results are then used to show strong support for the hypothesis by R. Lindzen that the regular banding (belts/zones/jets) on Jupiter and Saturn are driven by tides. The results also provide important, though less specific, support for a second hypothesis that inflated atmospheres inferred for a number of giant extra-solar planets are due to thermal or gravitational tides.

Completely inelastic ball.

PubMed

Gilet, T; Vandewalle, N; Dorbolo, S

2009-05-01

This Rapid Communication presents an analytical study of the bouncing of a completely inelastic ball on a vertically vibrated plate. The interplay of saddle-node and period-doubling bifurcations leads to an intricate structure of the bifurcation diagram with uncommon properties, such as an infinity of bifurcation cascades in a finite range of the control parameter Gamma. A pseudochaotic behavior, consisting in arbitrarily long and complex periodic sequences, is observed through this generic system.

Completely inelastic ball

NASA Astrophysics Data System (ADS)

Gilet, T.; Vandewalle, N.; Dorbolo, S.

2009-05-01

This Rapid Communication presents an analytical study of the bouncing of a completely inelastic ball on a vertically vibrated plate. The interplay of saddle-node and period-doubling bifurcations leads to an intricate structure of the bifurcation diagram with uncommon properties, such as an infinity of bifurcation cascades in a finite range of the control parameter Γ . A pseudochaotic behavior, consisting in arbitrarily long and complex periodic sequences, is observed through this generic system.

Bouncing cosmologies from quantum gravity condensates

NASA Astrophysics Data System (ADS)

Oriti, Daniele; Sindoni, Lorenzo; Wilson-Ewing, Edward

2017-02-01

We show how the large-scale cosmological dynamics can be obtained from the hydrodynamics of isotropic group field theory condensate states in the Gross-Pitaevskii approximation. The correct Friedmann equations are recovered in the classical limit for some choices of the parameters in the action for the group field theory, and quantum gravity corrections arise in the high-curvature regime causing a bounce which generically resolves the big-bang and big-crunch singularities.

Synthesizing cognition in neuromorphic electronic systems

PubMed Central

Neftci, Emre; Binas, Jonathan; Rutishauser, Ueli; Chicca, Elisabetta; Indiveri, Giacomo; Douglas, Rodney J.

2013-01-01

The quest to implement intelligent processing in electronic neuromorphic systems lacks methods for achieving reliable behavioral dynamics on substrates of inherently imprecise and noisy neurons. Here we report a solution to this problem that involves first mapping an unreliable hardware layer of spiking silicon neurons into an abstract computational layer composed of generic reliable subnetworks of model neurons and then composing the target behavioral dynamics as a “soft state machine” running on these reliable subnets. In the first step, the neural networks of the abstract layer are realized on the hardware substrate by mapping the neuron circuit bias voltages to the model parameters. This mapping is obtained by an automatic method in which the electronic circuit biases are calibrated against the model parameters by a series of population activity measurements. The abstract computational layer is formed by configuring neural networks as generic soft winner-take-all subnetworks that provide reliable processing by virtue of their active gain, signal restoration, and multistability. The necessary states and transitions of the desired high-level behavior are then easily embedded in the computational layer by introducing only sparse connections between some neurons of the various subnets. We demonstrate this synthesis method for a neuromorphic sensory agent that performs real-time context-dependent classification of motion patterns observed by a silicon retina. PMID:23878215

Do sewn up singularities falsify the Palatini cosmology?

NASA Astrophysics Data System (ADS)

Szydłowski, Marek; Stachowski, Aleksander; Borowiec, Andrzej; Wojnar, Aneta

2016-10-01

We investigate further (cf. Borowiec et al. JCAP 1601(01):040, 2016) the Starobinsky cosmological model R+γ R^2 in the Palatini formalism with a Chaplygin gas and baryonic matter as a source in the context of singularities. The dynamics reduces to the 2D sewn dynamical system of a Newtonian type (a piece-wise-smooth dynamical system). We demonstrate that the presence of a sewn up freeze singularity (glued freeze type singularities) for the positive γ is, in this case, a generic feature of the early evolution of the universe. It is demonstrated that γ equal zero is a bifurcation parameter and the dynamics qualitatively changes as the γ sign is changing. On the other side for the case of negative γ instead of the big bang the sudden bounce singularity of a finite scale factor does appear and there is a generic class of bouncing solutions. While the Ω _{γ } > 0 is favored by data only very small values of Ω _{γ } parameter are allowed if we require agreement with the Λ CDM model. From the statistical analysis of astronomical observations, we deduce that the case of only very small negative values of Ω _γ cannot be rejected. Therefore, observation data favor the universe without the ghost states (f'(hat{R})>0) and tachyons (f''(hat{R})>0).

A fresh look at crater scaling laws for normal and oblique hypervelocity impacts

NASA Technical Reports Server (NTRS)

Watts, A. J.; Atkinson, D. R.; Rieco, S. R.; Brandvold, J. B.; Lapin, S. L.; Coombs, C. R.

1993-01-01

With the concomitant increase in the amount of man-made debris and an ever increasing use of space satellites, the issue of accidental collisions with particles becomes more severe. While the natural micrometeoroid population is unavoidable and assumed constant, continued launches increase the debris population at a steady rate. Debris currently includes items ranging in size from microns to meters which originated from spent satellites and rocket cases. To understand and model these environments, impact damage in the form of craters and perforations must be analyzed. Returned spacecraft materials such as those from LDEF and Solar Max have provided such a testbed. From these space-aged samples various impact parameters (i.e., particle size, particle and target material, particle shape, relative impact speed, etc.) may be determined. These types of analyses require the use of generic analytic scaling laws which can adequately describe the impact effects. Currently, most existing analytic scaling laws are little more than curve-fits to limited data and are not based on physics, and thus are not generically applicable over a wide range of impact parameters. During this study, a series of physics-based scaling laws for normal and oblique crater and perforation formation has been generated into two types of materials: aluminum and Teflon.

Hairy black holes in scalar extended massive gravity

NASA Astrophysics Data System (ADS)

Tolley, Andrew J.; Wu, De-Jun; Zhou, Shuang-Yong

2015-12-01

We construct static, spherically symmetric black hole solutions in scalar extended ghost-free massive gravity and show the existence of hairy black holes in this class of extension. While the existence seems to be a generic feature, we focus on the simplest models of this extension and find that asymptotically flat hairy black holes can exist without fine-tuning the theory parameters, unlike the bi-gravity extension, where asymptotical flatness requires fine-tuning in the parameter space. Like the bi-gravity extension, we are unable to obtain asymptotically dS regular black holes in the simplest models considered, but it is possible to obtain asymptotically AdS black holes.

The experiences of implementing generic medicine policy in eight countries: A review and recommendations for a successful promotion of generic medicine use

PubMed Central

Hassali, Mohamed Azmi; Alrasheedy, Alian A.; McLachlan, Andrew; Nguyen, Tuan Anh; AL-Tamimi, Saleh Karamah; Ibrahim, Mohamed Izham Mohamed; Aljadhey, Hisham

2013-01-01

Generic medicines are clinically interchangeable with original brand medicines and have the same quality, efficacy and safety profiles. They are, nevertheless, much cheaper in price. Thus, while providing the same therapeutic outcomes, generic medicines lead to substantial savings for healthcare systems. Therefore, the quality use of generic medicines is promoted in many countries. In this paper, we reviewed the role of generic medicines in healthcare systems and the experiences of promoting the use of generic medicines in eight selected countries, namely the United States (US), the United Kingdom (UK), Sweden, Finland, Australia, Japan, Malaysia and Thailand. The review showed that there are different main policies adopted to promote generic medicines such as generic substitution in the US, generic prescribing in the UK and mandatory generic substitution in Sweden and Finland. To effectively and successfully implement the main policy, different complementary policies and initiatives were necessarily introduced. Barriers to generic medicine use varied between countries from negative perceptions about generic medicines to lack of a coherent generic medicine policy, while facilitators included availability of information about generic medicines to both healthcare professionals and patients, brand interchangeability guidelines, regulations that support generic substitution by pharmacists, and incentives to both healthcare professionals and patients. PMID:25561861

Optimal channel efficiency in a sensory network

NASA Astrophysics Data System (ADS)

Mosqueiro, Thiago S.; Maia, Leonardo P.

2013-07-01

Spontaneous neural activity has been increasingly recognized as a subject of key relevance in neuroscience. It exhibits nontrivial spatiotemporal structure reflecting the organization of the underlying neural network and has proved to be closely intertwined with stimulus-induced activity patterns. As an additional contribution in this regard, we report computational studies that strongly suggest that a stimulus-free feature rules the behavior of an important psychophysical measure of the sensibility of a sensory system to a stimulus, the so-called dynamic range. Indeed in this paper we show that the entropy of the distribution of avalanche lifetimes (information efficiency, since it can be interpreted as the efficiency of the network seen as a communication channel) always accompanies the dynamic range in the benchmark model for sensory systems. Specifically, by simulating the Kinouchi-Copelli (KC) model on two broad families of model networks, we generically observed that both quantities always increase or decrease together as functions of the average branching ratio (the control parameter of the KC model) and that the information efficiency typically exhibits critical optimization jointly with the dynamic range (i.e., both quantities are optimized at the same value of that control parameter, that turns out to be the critical point of a nonequilibrium phase transition). In contrast with the practice of taking power laws to identify critical points in most studies describing measured neuronal avalanches, we rely on data collapses as more robust signatures of criticality to claim that critical optimization may happen even when the distribution of avalanche lifetimes is not a power law, as suggested by a recent experiment. Finally, we note that the entropy of the size distribution of avalanches (information capacity) does not always follow the dynamic range and the information efficiency when they are critically optimized, despite being more widely used than the latter to describe the computational capabilities of a neural network. This strongly suggests that dynamical rules allowing a proper temporal matching of the states of the interacting neurons is the key for achieving good performance in information processing, rather than increasing the number of available units.

Catenaries in Drag

NASA Astrophysics Data System (ADS)

Chakrabarti, Brato; Hanna, James

2014-11-01

Dynamical equilibria of towed cables and sedimenting filaments have been the targets of much numerical work; here, we provide analytical expressions for the configurations of a translating and axially moving string subjected to a uniform body force and local, linear, anisotropic drag forces. Generically, these configurations comprise a five-parameter family of planar shapes determined by the ratio of tangential (axial) and normal drag coefficients, the angle between the translational velocity and the body force, the relative magnitudes of translational and axial drag forces with respect to the body force, and a scaling parameter. This five-parameter family of shapes is, in fact, a degenerate six-parameter family of equilibria in which inertial forces rescale the tension in the string without affecting its shape. Each configuration is represented by a first order dynamical system for the tangential angle of the body. Limiting cases include the dynamic catenaries with or without drag, and purely sedimenting or towed strings.

Calibration Procedure for Measuring S-Parameters in Balun Applications on 150-ohm High-Speed Cables

NASA Technical Reports Server (NTRS)

Theofylaktos, Onoufrios; Warner, Joseph D.

2012-01-01

In the radiofrequency (RF) world, in order to characterize cables that do not conform to the typical 50-omega impedance, a time domain reflectometer (TDR) would probably be the simplest and quickest tool to attain this goal. In the real world, not every engineer has a TDR at their disposal; however, they most likely have a network analyzer available. Given a generic 50-omega vector network analyzer (VNA), we would like to make S-parameter measurements for non-50-omega devices (DUTs). For that, we utilize RF balanced/unbalanced transformers (called baluns for short), which are primarily used to match the impedance between the two VNA ports and the DUT's input and output ports, for the two-port S-parameter measurements.

Dirac-Born-Infeld inflation using a one-parameter family of throat geometries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gmeiner, Florian; White, Chris D, E-mail: fgmeiner@nikhef.nl, E-mail: cwhite@nikhef.nl

2008-02-15

We demonstrate the possibility of examining cosmological signatures in the Dirac-Born-Infeld (DBI) inflation setup using the BGMPZ solution, a one-parameter family of geometries for the warped throat which interpolate between the Maldacena-Nunez and Klebanov-Strassler solutions. The warp factor is determined numerically and is subsequently used to calculate cosmological observables, including the scalar and tensor spectral indices, for a sample point in the parameter space. As one moves away from the Klebanov-Strassler (KS) solution for the throat, the warp factor is qualitatively different, which leads to a significant change for the observables, but also generically increases the non-Gaussianity of the models.more » We argue that the different models can potentially be differentiated by current and future experiments.« less

Generic medicines and generic substitution: contrasting perspectives of stakeholders in Ireland.

PubMed

O'Leary, A; Usher, C; Lynch, M; Hall, M; Hemeryk, L; Spillane, S; Gallagher, P; Barry, M

2015-12-15

The Health (Pricing and Supply of Medical Goods) Act 2013 passed into law in July 2013 and legislated for generic substitution in Ireland. The aim of the study was to ascertain the knowledge and perceptions of stakeholders i.e. patients, pharmacists and prescribers, of generic medicines and to generic substitution with the passing of legislation. Three stakeholder specific questionnaires were developed to assess knowledge of and perceptions to generic medicines and generic substitution. Purposive samples of patients, prescribers and pharmacists were analysed. Descriptive quantitative and qualitative analyses were undertaken. A total of 762 healthcare professionals and 353 patients were recruited. The study highlighted that over 84% of patients were familiar with generic medicines and are supportive of the concept of generic substitution. Approximately 74% of prescribers and 84% of pharmacists were supportive of generic substitution in most cases. The main areas of concern highlighted by the healthcare professionals that might impact on the successful implementation of the policy, were the issue of bioequivalence with generic medicines, the computer software systems used at present in general practitioner (GP) surgeries and the availability of branded generics. The findings from this study identify a high baseline rate of acceptance to generic medicines and generic substitution among patients, prescribers and pharmacists in the Irish setting. The concerns of the main stakeholders provide a valuable insight into the potential difficulties that may arise in its implementation, and the need for on-going reassurance and proactive dissemination of the impact of the generic substitution policy. The existing positive attitude to generic medicines and generic substitution among key stakeholders in Ireland to generic substitution, combined with appropriate support and collaboration should result in the desired increase in rates of prescribing, dispensing and use of generic medicines.

Effects of electronic prescribing on formulary compliance and generic drug utilization in the ambulatory care setting: a retrospective analysis of administrative claims data.

PubMed

Ross, S Michael; Papshev, Diana; Murphy, Erin L; Sternberg, David J; Taylor, Jeffrey; Barg, Ronald

2005-06-01

Electronic prescribing (e-prescribing) provides formulary information at the point of care. The objective of this study was to assess the effects of e-prescribing on formulary compliance and generic utilization. This was a retrospective analysis of pharmacy claims data from a large national managed care organization. A sample of 95 providers using predominantly e-prescribing was randomly selected (e-prescriber group). A matched sample of 95 traditional prescribers was selected (traditional prescriber group), matched to the e-prescriber group by zip code and medical specialty. A total of 110,975 paid pharmacy claims, for the 12 months from August 1, 2001, through July 31, 2002, were analyzed to assess the effect of e-prescribing on formulary compliance and generic utilization. All paid pharmacy claims were examined for each group; for the e-prescriber group, this included all claims, not just those prescribed using an e-prescribing device. A written qualitative survey was distributed to physicians and office managers to assess e-prescribing usage, sources of formulary information, and effects of e-prescribing on office resources. Both predominantly e-prescribers and traditional prescribers demonstrated high levels of formulary compliance, 83.2% versus 82.8%, respectively (P=0.32). Formulary compliance for these groups did not differ from the overall prescriber population (82.0%). There was not a difference in generic drug utilization rates between e-prescribers and traditional prescribers (absolute rates 37.3% versus 36.9%, P=0.18). Qualitative survey responses supported previously reported research indicating reductions in calls both to and from pharmacies for prescription orders. An examination of paid pharmacy claims from a large, national managed care organization demonstrated no differences between predominantly e-prescribers and traditional prescribers in measures of formulary compliance or generic drug utilization. Future studies should examine keystroke data at the point of care to observe more detail about drug selection methods.

Is there a relationship between patient beliefs or communication about generic drugs and medication utilization?

PubMed

Shrank, William H; Cadarette, Suzanne M; Cox, Emily; Fischer, Michael A; Mehta, Jyotsna; Brookhart, Alan M; Avorn, Jerry; Choudhry, Niteesh K

2009-03-01

Insurers and policymakers strive to stimulate more cost-effective prescribing and, increasingly, are educating beneficiaries about generics. To evaluate the relationship between patient beliefs and communication about generic drugs and actual drug use. We performed a national mailed survey of a random sample of 2500 commercially-insured adults. Patient responses were linked to pharmacy claims data to assess actual generic medication use. We used factor analysis to develop 5 multi-item scales from patient survey responses that measured: (1) general preferences for generics, (2) generic safety/effectiveness, (3) generic cost/value, (4) comfort with generic substitution, and (5) communication with providers about generics. The relationship between each scale and the proportion of prescriptions filled for generics was assessed using linear regression, controlling for demographic, health, and insurance characteristics. Separate models were created for each scale and then all 5 scales were included simultaneously in a fully-adjusted model. The usable response rate was 48%. When evaluated independently, a 1 SD increase in each of the 5 scales was associated with a 3.1% to 6.3% increase in generic drug use (P < 0.05 for each). In the fully adjusted model, only 2 scales were significantly associated with generic drug use: comfort with generic substitution (P = 0.021) and communication with providers about generic drugs (P = 0.012). Generic drug use is most closely associated with the 2 actionable items we evaluated: communication with providers about generics and comfort with generic substitution. Educational campaigns that focus on these 2 domains may be most effective at influencing generic drug use.

Improving the Algae Bloom Prediction through the Assimilation of the Remotely Sensed Chlorophyll-A Data in a Generic Ecological Model in the North Sea

NASA Astrophysics Data System (ADS)

El Serafy, Ghada

2010-05-01

Harmful algae can cause damage to co-existing organisms, tourism and farmers. Accurate predictions of algal future composition and abundance as well as when and where algal blooms may occur could help early warning and mitigating. The Generic Ecological Model, GEM, [Blauw et al 2008] is an instrument that can be applied to any water system (fresh, transitional or coastal) to calculate the primary production, chlorophyll-a concentration and phytoplankton species composition. It consists of physical, chemical and ecological model components which are coupled together to build one generic and flexible modeling tool. For the North Sea, the model has been analyzed to assess sensitivity of the simulated chlorophyll-a concentration to a subset of ecologically significant set of factors. The research led to the definition of the most significant set of parameters to the algae blooming process in the North Sea [Salacinska et al 2009]. In order to improve the prediction of the model, the set of parameters and the chlorophyll-a concentration can be further estimated through the use of data assimilation. In this research, the Ensemble Kalman Filter (EnKF) data assimilation technique is used to assimilate the chlorophyll-a data of the North Sea, retrieved from MEdium Resolution Imaging Sensor (MERIS) spectrometer data [Peters et al 2005], in the GEM model. The chlorophyll-a data includes concentrations and error information that enable their use in data assimilation. For the same purpose, the uncertainty of the ecological generic model, GEM has been quantified by means of Monte Carlo approach. Through a study covering the year of 2003, the research demonstrates that both data and model are sufficiently robust for a successful assimilation. The results show that through the assimilation of the satellite data, a better description of the algae bloom has been achieved and an improvement of the capability of the model to predict the algae bloom for the North Sea has been confirmed. Blauw A.N., Los F.J., Bokhorst M., Erftemeijer P.L.A., (2009), GEM: a Generic Ecological Model for estuaries and coastal waters. Journal of Hydrobiologia, Volume 618, Number 1, 175-198. Peters, S.W.M., Eleveld, M. Pasterkamp, R., Woerd, H. van der, Devolder, M., Jans, S., Park, Y., Ruddick, K., Block, T., Brockmann, C., Doerffer, R., Krasemann, H., Röttgers, R., Schönfeld, W., Jørgensen, P.V., Tilstone, G., Martinez-Vicente, V., Moore, G., Sørensen, K., Høkedal, J., Johnsen, T.M., Lømsland, E.R., Aas, E. (2005). Atlas of Chlorophyll-a concentration for the North Sea based on MERIS imagery of 2003. IVM report, Vrije Universiteit Amsterdam, 117 pp. ISBN 90-5192-026-1. Salacinska K., El Serafy G.Y., Blauw A., Los F.J., (2009) Sensitivity analysis of the two dimensional application of the Generic Ecological Model (GEM) to algal bloom prediction in the North Sea, Journal of Ecological Modeling, volume 221, 7, pp 178-190, DOI: 10.1016/j.ecolmodel.2009.10.001

Association of authorized generic marketing with prescription drug spending on antidepressants from 2000 to 2011.

PubMed

Cheng, Ning; Banerjee, Tannista; Qian, Jingjing; Hansen, Richard A

Prior research suggests that authorized generic drugs increase competition and decrease prices, but little empirical evidence supports this conclusion. This study evaluated the impact of authorized generic marketing on brand and generic prices. Longitudinal analysis of the household component of the Medical Expenditure Panel Survey. Interview panels over 12 years, with a new panel each year. For each panel, 5 rounds of household interviews were conducted over 30 months. Nationally representative sample of the U.S. civilian noninstitutionalized population, focusing on people using 1 of 5 antidepressant drugs that became generically available between 2000 to 2011. Drugs and dose/formulations with versus without an authorized generic drug marketed. Multiple linear regression models with lagged variables evaluated the effect of an authorized generic on average inflation-adjusted brand and generic price, adjusting for payment sources, generic entry time, competitor price, and year. During 2000-2011, annual brand antidepressant utilization decreased from 51.47 to 7.52 million prescriptions, and generic antidepressant utilization increased from 0 to 88.83 million prescriptions. Over time, payment per prescription for brand prescriptions increased 25% overall, and generic payments decreased 70% for all payer types. With unadjusted data, after generic entry the average brand price decreased $0.59 per year with and $3.62 per year without an authorized generic in the market. Average generic prices decreased $10.30 per year with and $8.47 per year without an authorized generic in the market. In multiple regression models with lagged variables adjusted for heteroscedasticity, payer source, time since generic entry, competitor price, and year, authorized generics significantly reduced average payment for generic (-$3.03) and brand (-$60.64) prescriptions, and over time this price change slowly diminished. Availability of an authorized generic was associated with reduced average generic and brand price in the antidepressant market, supporting prior evidences. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Stochastic, compartmental, and dynamic modeling of cross-contamination during mechanical smearing of cheeses.

PubMed

Aziza, Fanny; Mettler, Eric; Daudin, Jean-Jacques; Sanaa, Moez

2006-06-01

Cheese smearing is a complex process and the potential for cross-contamination with pathogenic or undesirable microorganisms is critical. During ripening, cheeses are salted and washed with brine to develop flavor and remove molds that could develop on the surfaces. Considering the potential for cross-contamination of this process in quantitative risk assessments could contribute to a better understanding of this phenomenon and, eventually, improve its control. The purpose of this article is to model the cross-contamination of smear-ripened cheeses due to the smearing operation under industrial conditions. A compartmental, dynamic, and stochastic model is proposed for mechanical brush smearing. This model has been developed to describe the exchange of microorganisms between compartments. Based on the analytical solution of the model equations and on experimental data collected with an industrial smearing machine, we assessed the values of the transfer parameters of the model. Monte Carlo simulations, using the distributions of transfer parameters, provide the final number of contaminated products in a batch and their final level of contamination for a given scenario taking into account the initial number of contaminated cheeses of the batch and their contaminant load. Based on analytical results, the model provides indicators for smearing efficiency and propensity of the process for cross-contamination. Unlike traditional approaches in mechanistic models, our approach captures the variability and uncertainty inherent in the process and the experimental data. More generally, this model could represent a generic base to use in modeling similar processes prone to cross-contamination.

Combining a generic process-based productivity model classification method to predict the presence and absence species in the Pacific Northwest, U.S.A

Treesearch

Nicholas C. Coops; Richard H. Waring; Todd A. Schroeder

2009-01-01

Although long-lived tree species experience considerable environmental variation over their life spans, their geographical distributions reflect sensitivity mainly to mean monthly climatic conditions.We introduce an approach that incorporates a physiologically based growth model to illustrate how a half-dozen tree species differ in their responses to monthly variation...

Document for 270 Voltage Direct Current (270 V dc) System

NASA Astrophysics Data System (ADS)

1992-09-01

The paper presents the technical design and application information established by the SAE Aerospace Recommended Practice concerning the generation, distribution, control, and utilization of aircraft 270 V dc electrical power systems and support equipment. Also presented are references and definitions making it possible to compare various electrical systems and components. A diagram of the generic 270 V Direct Current High-Voltage Direct System is included.

Development of Generic Aircrew Measures of Performance for Distributed Mission Training

DTIC Science & Technology

2003-03-31

collecte de données utiles sur les performances humaines représente des défis considérables. De plus, on ne trouvera pas deux essais d’IMD exactement...weapons Countered bandits offensive Very sound energy management and aircraft manoeuvering Quickly capitalized on offensive position...Effectively countered bandits offensive to a neutral position Ideal Aircraft energy management and manoeuvering Expeditiously capitalized on

Generic and Automated Runtime Program Repair

DTIC Science & Technology

2012-09-01

other person or corporation; or convey any rights or permission to manufacture, use, or sell any patented invention that may relate to them... PERSON PATRICK M. HURLEY a. REPORT U b. ABSTRACT U c. THIS PAGE U 19b. TELEPONE NUMBER (Include area code) N/A Standard Form 298...Public Release; Distribution Unlimited. 2. Introduction Software bugs are ubiquitous, and fixing them remains a difficult, time- consuming , and manual

Inflated medicine prices in Vietnam: a qualitative study.

PubMed

Nguyen, Tuan Anh; Knight, Rosemary; Mant, Andrea; Razee, Husna; Brooks, Geoffrey; Dang, Thu Ha; Roughead, Elizabeth Ellen

2017-06-01

One third of the world's population lacks regular access to essential medicines partly because of the high cost of medicines. In Vietnam, the cost to patients of medicines was 47 times the international reference price for originator brands and 11 times the price for generic equivalents in the public sector. In this article, we report the results of a qualitative study conducted to identify the principal reasons for inflated medicine prices in Vietnam.Between April 2008 and December 2009, 29 semi-structured interviews were conducted with staff from pharmaceutical companies, private pharmacies, the Ministry of Health, and the Ministry of Finance of Vietnam. Study participants were recruited using a combination of purposive and snowball sampling techniques. Interviews were recorded, transcribed and coded using NVivo8® software and analyzed using a framework of structure-conduct-performance (SCP).Participants attributed high prices of originator medicines to a monopoly of supply. The prices of generic medicines were also considered to be excessive, reportedly due to the need to recoup the cost of financial inducements paid to prescribers and procurement officers. These inducements constituted a dominant cost component of the end price of generic medicines. Poor market intelligence about current world prices, as well as failure to achieve economies of scale because of unwarranted duplication in pharmaceutical production and distribution system were also factors contributing to high prices. This was reported to be further compounded by multiple layers in the supply chain and unregulated retail mark-ups.To address these problems a multifaceted approach is needed encompassing policy and legislative responses. Policy options include establishing effective monitoring of medicine quality assurance, procurement, distribution and use. Rationalization of the domestic pharmaceutical production and distribution system to achieve economies of scale is also required. Appropriate legal responses include collaborations with the justice and law enforcement sectors to enforce existing laws. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Generic phylogeny, historical biogeography and character evolution of the cosmopolitan aquatic plant family Hydrocharitaceae

PubMed Central

2012-01-01

Background Hydrocharitaceae is a fully aquatic monocot family, consists of 18 genera with approximately 120 species. The family includes both fresh and marine aquatics and exhibits great diversity in form and habit including annual and perennial life histories; submersed, partially submersed and floating leaf habits and linear to orbicular leaf shapes. The family has a cosmopolitan distribution and is well represented in the Tertiary fossil record in Europe. At present, the historical biogeography of the family is not well understood and the generic relationships remain controversial. In this study we investigated the phylogeny and biogeography of Hydrocharitaceae by integrating fossils and DNA sequences from eight genes. We also conducted ancestral state reconstruction for three morphological characters. Results Phylogenetic analyses produced a phylogeny with most branches strongly supported by bootstrap values greater than 95 and Bayesian posterior probability values of 1.0. Stratiotes is the first diverging lineage with the remaining genera in two clades, one clade consists of Lagarosiphon, Ottelia, Blyxa, Apalanthe, Elodea and Egeria; and the other consists of Hydrocharis-Limnobium, Thalassia, Enhalus, Halophila, Najas, Hydrilla, Vallisneria, Nechamandra and Maidenia. Biogeographic analyses (DIVA, Mesquite) and divergence time estimates (BEAST) resolved the most recent common ancestor of Hydrocharitaceae as being in Asia during the Late Cretaceous and Palaeocene (54.7-72.6 Ma). Dispersals (including long-distance dispersal and migrations through Tethys seaway and land bridges) probably played major roles in the intercontinental distribution of this family. Ancestral state reconstruction suggested that in Hydrocharitaceae evolution of dioecy is bidirectional, viz., from dioecy to hermaphroditism, and from hermaphroditism to dioecy, and that the aerial-submerged leaf habit and short-linear leaf shape are the ancestral states. Conclusions Our study has shed light on the previously controversial generic phylogeny of Hydrocharitaceae. The study has resolved the historical biogeography of this family and supported dispersal as the most likely explanation for the intercontinental distribution. We have also provided valuable information for understanding the evolution of breeding system and leaf phenotype in aquatic monocots. PMID:22404786

Is There a Relationship Between Patient Beliefs or Communication About Generic Drugs and Medication Utilization?

PubMed Central

Shrank, William H.; Cadarette, Suzanne M.; Cox, Emily; Fischer, Michael A.; Mehta, Jyotsna; Brookhart, Alan M.; Avorn, Jerry; Choudhry, Niteesh K.

2009-01-01

Background Insurers and policymakers strive to stimulate more cost-effective prescribing and, increasingly, are educating beneficiaries about generics. Objectives To evaluate the relationship between patient beliefs and communication about generic drugs and actual drug use. Research Design and Subjects We performed a national mailed survey of a random sample of 2500 commercially-insured adults. Patient responses were linked to pharmacy claims data to assess actual generic medication use. Measures We used factor analysis to develop 5 multi-item scales from patient survey responses that measured: (1) general preferences for generics, (2) generic safety/effectiveness, (3) generic cost/value, (4) comfort with generic substitution, and (5) communication with providers about generics. The relationship between each scale and the proportion of prescriptions filled for generics was assessed using linear regression, controlling for demographic, health, and insurance characteristics. Separate models were created for each scale and then all 5 scales were included simultaneously in a fully-adjusted model. Results The usable response rate was 48%. When evaluated independently, a 1 SD increase in each of the 5 scales was associated with a 3.1% to 6.3% increase in generic drug use (P < 0.05 for each). In the fully adjusted model, only 2 scales were significantly associated with generic drug use: comfort with generic substitution (P = 0.021) and communication with providers about generic drugs (P = 0.012). Conclusions Generic drug use is most closely associated with the 2 actionable items we evaluated: communication with providers about generics and comfort with generic substitution. Educational campaigns that focus on these 2 domains may be most effective at influencing generic drug use. PMID:19194329

Estimation of some transducer parameters in a broadband piezoelectric transmitter by using an artificial intelligence technique.

PubMed

Ruíz, A; Ramos, A; San Emeterio, J L

2004-04-01

An estimation procedure to efficiently find approximate values of internal parameters in ultrasonic transducers intended for broadband operation would be a valuable tool to discover internal construction data. This information is necessary in the modelling and simulation of acoustic and electrical behaviour related to ultrasonic systems containing commercial transducers. There is not a general solution for this generic problem of parameter estimation in the case of broadband piezoelectric probes. In this paper, this general problem is briefly analysed for broadband conditions. The viability of application in this field of an artificial intelligence technique supported on the modelling of the transducer internal components is studied. A genetic algorithm (GA) procedure is presented and applied to the estimation of different parameters, related to two transducers which are working as pulsed transmitters. The efficiency of this GA technique is studied, considering the influence of the number and variation range of the estimated parameters. Estimation results are experimentally ratified.

Parameter estimation of multivariate multiple regression model using bayesian with non-informative Jeffreys’ prior distribution

NASA Astrophysics Data System (ADS)

Saputro, D. R. S.; Amalia, F.; Widyaningsih, P.; Affan, R. C.

2018-05-01

Bayesian method is a method that can be used to estimate the parameters of multivariate multiple regression model. Bayesian method has two distributions, there are prior and posterior distributions. Posterior distribution is influenced by the selection of prior distribution. Jeffreys’ prior distribution is a kind of Non-informative prior distribution. This prior is used when the information about parameter not available. Non-informative Jeffreys’ prior distribution is combined with the sample information resulting the posterior distribution. Posterior distribution is used to estimate the parameter. The purposes of this research is to estimate the parameters of multivariate regression model using Bayesian method with Non-informative Jeffreys’ prior distribution. Based on the results and discussion, parameter estimation of β and Σ which were obtained from expected value of random variable of marginal posterior distribution function. The marginal posterior distributions for β and Σ are multivariate normal and inverse Wishart. However, in calculation of the expected value involving integral of a function which difficult to determine the value. Therefore, approach is needed by generating of random samples according to the posterior distribution characteristics of each parameter using Markov chain Monte Carlo (MCMC) Gibbs sampling algorithm.

Trading Speed and Accuracy by Coding Time: A Coupled-circuit Cortical Model

PubMed Central

Standage, Dominic; You, Hongzhi; Wang, Da-Hui; Dorris, Michael C.

2013-01-01

Our actions take place in space and time, but despite the role of time in decision theory and the growing acknowledgement that the encoding of time is crucial to behaviour, few studies have considered the interactions between neural codes for objects in space and for elapsed time during perceptual decisions. The speed-accuracy trade-off (SAT) provides a window into spatiotemporal interactions. Our hypothesis is that temporal coding determines the rate at which spatial evidence is integrated, controlling the SAT by gain modulation. Here, we propose that local cortical circuits are inherently suited to the relevant spatial and temporal coding. In simulations of an interval estimation task, we use a generic local-circuit model to encode time by ‘climbing’ activity, seen in cortex during tasks with a timing requirement. The model is a network of simulated pyramidal cells and inhibitory interneurons, connected by conductance synapses. A simple learning rule enables the network to quickly produce new interval estimates, which show signature characteristics of estimates by experimental subjects. Analysis of network dynamics formally characterizes this generic, local-circuit timing mechanism. In simulations of a perceptual decision task, we couple two such networks. Network function is determined only by spatial selectivity and NMDA receptor conductance strength; all other parameters are identical. To trade speed and accuracy, the timing network simply learns longer or shorter intervals, driving the rate of downstream decision processing by spatially non-selective input, an established form of gain modulation. Like the timing network's interval estimates, decision times show signature characteristics of those by experimental subjects. Overall, we propose, demonstrate and analyse a generic mechanism for timing, a generic mechanism for modulation of decision processing by temporal codes, and we make predictions for experimental verification. PMID:23592967

Positional Differences in External On-Field Load During Specific Drill Classifications Over a Professional Rugby League Preseason.

PubMed

Cummins, Cloe; McLean, Blake; Halaki, Mark; Orr, Rhonda

2017-07-01

To quantify the external training loads of positional groups in preseason training drills. Thirty-three elite rugby league players were categorized into 1 of 4 positional groups: outside backs (n = 9), adjustables (n = 9), wide-running forwards (n = 9), and hit-up forwards (n = 6). Data for 8 preseason weeks were collected using microtechnology devices. Training drills were classified based on drill focus: speed and agility, conditioning, and generic and positional skills. Total, high-speed, and very-high-speed distance decreased across the preseason in speed and agility (moderate, small, and small, respectively), conditioning (large, large, and small) and generic skills (large, large, and large). The duration of speed and generic skills also decreased (77% and 48%, respectively). This was matched by a concomitant increase in total distance (small), high-speed running (small), very-high-speed running (moderate), and 2-dimensional (2D) BodyLoad (small) demands in positional skills. In positional skills, hit-up forwards (1240 ± 386 m) completed less very-high-speed running than outside backs (2570 ± 1331 m) and adjustables (2121 ± 1163 m). Hit-up forwards (674 ± 253 AU) experienced greater 2D BodyLoad demands than outside backs (432 ± 230 AU, P = .034). In positional drills, hit-up forwards experienced greater relative 2D BodyLoad demands than outside backs (P = .015). Conversely, outside backs experienced greater relative high- (P = .007) and very-high-speed-running (P < .001) demands than hit-up forwards. Significant differences were observed in training loads between positional groups during positional skills but not in speed and agility, conditioning, and generic skills. This work also highlights the importance of different external-load parameters to adequately quantify workload across different positional groups.

Multimodal analysis of pretreated biomass species highlights generic markers of lignocellulose recalcitrance.

PubMed

Herbaut, Mickaël; Zoghlami, Aya; Habrant, Anouck; Falourd, Xavier; Foucat, Loïc; Chabbert, Brigitte; Paës, Gabriel

2018-01-01

Biomass recalcitrance to enzymatic hydrolysis has been assigned to several structural and chemical factors. However, their relative importance remains challenging to evaluate. Three representative biomass species (wheat straw, poplar and miscanthus) were submitted to four standard pretreatments (dilute acid, hot water, ionic liquid and sodium chlorite) in order to generate a set of contrasted samples. A large array of techniques, including wet chemistry analysis, porosity measurements using NMR spectroscopy, electron and fluorescence microscopy, were used in order to determine possible generic factors of biomass recalcitrance. The pretreatment conditions selected allowed obtaining samples displaying different susceptibility to enzymatic hydrolysis (from 3 up to 98% of the initial glucose content released after 96 h of saccharification). Generic correlation coefficients were calculated between the measured chemical and structural features and the final saccharification rates. Increases in porosity displayed overall strong positive correlations with saccharification efficiency, but different porosity ranges were concerned depending on the considered biomass. Lignin-related factors displayed highly negative coefficients for all biomasses. Lignin content, which is likely involved in the correlations observed for porosity, was less detrimental to enzymatic hydrolysis than lignin composition. Lignin influence was highlighted by the strong negative correlation with fluorescence intensity which mainly originates from monolignols in mature tissues. Our results provide a better understanding of the factors responsible for biomass recalcitrance that can reasonably be considered as generic. The correlations with specific porosity ranges are biomass species-dependent, meaning that enzymes cocktails with fitted enzyme size are likely to be needed to optimise saccharification depending on the biomass origin. Lignin composition, which probably influences its structure, is the most important parameter to overcome to enhance enzymes access to the polysaccharides. Accordingly, fluorescence intensity was found to be a rapid and simple method to assess recalcitrance after pretreatment.

Measuring health-related quality of life in Hungarian children with heart disease: psychometric properties of the Hungarian version of the Pediatric Quality of Life Inventory 4.0 Generic Core Scales and the Cardiac Module.

PubMed

Berkes, Andrea; Pataki, István; Kiss, Mariann; Kemény, Csilla; Kardos, László; Varni, James W; Mogyorósy, Gábor

2010-01-28

The aim of the study was to investigate the psychometric properties of the Hungarian version of the Pediatric Quality of Life Inventory (PedsQL) Generic Core Scales and Cardiac Module. The PedsQL 4.0 Generic Core Scales and the PedsQL 3.0 Cardiac Module was administered to 254 caregivers of children (aged 2-18 years) and to 195 children (aged 5-18 years) at a pediatric cardiology outpatient unit. A postal survey on a demographically group-matched sample of the general population with 525 caregivers of children (aged 2-18 years) and 373 children (aged 5-18 years) was conducted with the PedsQL 4.0 Generic Core Scale. Responses were described, compared over subgroups of subjects, and were used to assess practical utility, distributional coverage, construct validity, internal consistency, and inter-reporter agreement of the instrument. The moderate scale-level mean percentage of missing item responses (range 1.8-2.3%) supported the feasibility of the Generic Core Scales for general Hungarian children. Minimal to moderate ceiling effects and no floor effects were found on the Generic Core Scales. We observed stronger ceiling than floor effects in the Cardiac Module. Most of the scales showed satisfactory reliability with Cronbach's alpha estimates exceeding 0.70. Generally, moderate to good agreement was found between self- and parent proxy-reports in the patient and in the comparison group (intraclass correlation coefficient range 0.52-0.77), but remarkably low agreement in the perceived physical appearance subscale in the age group 5-7 years (0.18) and for the treatment II scale (problems on taking heart medicine) scale of the Cardiac Module in children aged 8-12 years (0.39). Assessing the construct validity of the questionnaires, statistically significant difference was found between the patient group and the comparison group only in the Physical Functioning Scale scores (p = 0.003) of the child self-report component, and in Physical (p = 0.022), Emotional, (p = 0.017), Psychosocial Summary (p = 0.019) scores and in the total HRQoL (health-related quality of life) scale score (p = 0.034) for parent proxy-report. The findings generally support the feasibility, reliability and validity of the Hungarian translation of the PedsQL 4.0 Generic Core Scales and the PedsQL 3.0 Cardiac Module in Hungarian children with heart disease.

A biogeographical study on tropical flora of southern China.

PubMed

Zhu, Hua

2017-12-01

The tropical climate in China exists in southeastern Xizang (Tibet), southwestern to southeastern Yunnan, southwestern Guangxi, southern Guangdon, southern Taiwan, and Hainan, and these southern Chinese areas contain tropical floras. I checked and synonymized native seed plants from these tropical areas in China and recognized 12,844 species of seed plants included in 2,181 genera and 227 families. In the tropical flora of southern China, the families are mainly distributed in tropical areas and extend into temperate zones and contribute to the majority of the taxa present. The genera with tropical distributions also make up the most of the total flora. In terms of geographical elements, the genera with tropical Asian distribution constitute the highest proportion, which implies tropical Asian or Indo-Malaysia affinity. Floristic composition and geographical elements are conspicuous from region to region due to different geological history and ecological environments, although floristic similarities from these regions are more than 90% and 64% at the family and generic levels, respectively, but lower than 50% at specific level. These differences in the regional floras could be influenced by historical events associated with the uplift of the Himalayas, such as the southeastward extrusion of the Indochina geoblock, clockwise rotation and southeastward movement of Lanping-Simao geoblock, and southeastward movement of Hainan Island. The similarity coefficients between the flora of southern China and those of Indochina countries are more than 96% and 80% at family and generic levels, indicating their close floristic affinity and inclusion in the same biogeographically floristic unit.

Determination of Static and Dynamic Stability Derivatives Using Beggar

DTIC Science & Technology

2008-03-01

applies a symmetric Gauss - Seidel method , which solves the generic equation [A]x = b for x by dividing [A] into [A] = ([D][L])[U ] (2.68) 37 where D is...oscillations. Convergence studies on each of these parameters were performed to ensure both convergence and solution independence. Roll stability derivatives...aerodynamic stability parame- ters made dynamic solutions more difficult to compute and less reliable, but modern methods and resources are making this process

Top-quark loops and the muon anomalous magnetic moment

DOE PAGES

Czarnecki, Andrzej; Marciano, William J.

2017-12-07

The current status of electroweak radiative corrections to the muon anomalous magnetic moment is discussed. Asymptotic expansions for some important electroweak two-loop top quark triangle diagrams are illustrated and extended to higher order. Results are compared with the more general integral representation solution for generic fermion triangle loops coupled to pseudoscalar and scalar bosons of arbitrary mass. Furthermore, excellent agreement is found for a broader than expected range of mass parameters.

Twist-2 matching of transverse momentum dependent distributions

NASA Astrophysics Data System (ADS)

Gutiérrez-Reyes, Daniel; Scimemi, Ignazio; Vladimirov, Alexey A.

2017-06-01

We systematically study the large-qT (or small-b) matching of transverse momentum dependent (TMD) distributions to the twist-2 integrated parton distributions. Performing operator product expansion for a generic TMD operator at the next-to-leading order (NLO) we found the complete set of TMD distributions that match twist-2. These are unpolarized, helicity, transversity, pretzelosity and linearly polarized gluon distributions. The NLO matching coefficients for these distributions are presented. The pretzelosity matching coefficient is zero at the presented order, however, it is evident that it is non-zero in the following orders. This result offers a natural explanation of the small value of pretzelosity found in phenomenological fits. We also demonstrate that the cancellation of rapidity divergences by the leading order soft factor imposes the necessary requirement on the Lorentz structure of TMD operators, which is supported only by the TMD distributions of leading dynamical twist. Additionally, this requirement puts restrictions on the γ5-definition in the dimensional regularization.

The Market Dynamics of Generic Medicines in the Private Sector of 19 Low and Middle Income Countries between 2001 and 2011: A Descriptive Time Series Analysis

PubMed Central

Kaplan, Warren A.; Wirtz, Veronika J.; Stephens, Peter

2013-01-01

This observational study investigates the private sector, retail pharmaceutical market of 19 low and middle income countries (LMICs) in Latin America, Asia and the Middle East/South Africa analyzing the relationships between volume market share of generic and originator medicines over a time series from 2001 to 2011. Over 5000 individual pharmaceutical substances were divided into generic (unbranded generic, branded generic medicines) and originator categories for each country, including the United States as a comparator. In 9 selected LMICs, the market share of those originator substances with the largest decrease over time was compared to the market share of their counterpart generic versions. Generic medicines (branded generic plus unbranded generic) represent between 70 and 80% of market share in the private sector of these LMICs which exceeds that of most European countries. Branded generic medicine market share is higher than that of unbranded generics in all three regions and this is in contrast to the U.S. Although switching from an originator to its generic counterpart can save money, this narrative in reality is complex at the level of individual medicines. In some countries, the market behavior of some originator medicines that showed the most temporal decrease, showed switching to their generic counterpart. In other countries such as in the Middle East/South Africa and Asia, the loss of these originators was not accompanied by any change at all in market share of the equivalent generic version. For those countries with a significant increase in generic medicines market share and/or with evidence of comprehensive “switching” to generic versions, notably in Latin America, it would be worthwhile to establish cause-effect relationships between pharmaceutical policies and uptake of generic medicines. The absence of change in the generic medicines market share in other countries suggests that, at a minimum, generic medicines have not been strongly promoted. PMID:24098644

The market dynamics of generic medicines in the private sector of 19 low and middle income countries between 2001 and 2011: a descriptive time series analysis.

PubMed

Kaplan, Warren A; Wirtz, Veronika J; Stephens, Peter

2013-01-01

This observational study investigates the private sector, retail pharmaceutical market of 19 low and middle income countries (LMICs) in Latin America, Asia and the Middle East/South Africa analyzing the relationships between volume market share of generic and originator medicines over a time series from 2001 to 2011. Over 5000 individual pharmaceutical substances were divided into generic (unbranded generic, branded generic medicines) and originator categories for each country, including the United States as a comparator. In 9 selected LMICs, the market share of those originator substances with the largest decrease over time was compared to the market share of their counterpart generic versions. Generic medicines (branded generic plus unbranded generic) represent between 70 and 80% of market share in the private sector of these LMICs which exceeds that of most European countries. Branded generic medicine market share is higher than that of unbranded generics in all three regions and this is in contrast to the U.S. Although switching from an originator to its generic counterpart can save money, this narrative in reality is complex at the level of individual medicines. In some countries, the market behavior of some originator medicines that showed the most temporal decrease, showed switching to their generic counterpart. In other countries such as in the Middle East/South Africa and Asia, the loss of these originators was not accompanied by any change at all in market share of the equivalent generic version. For those countries with a significant increase in generic medicines market share and/or with evidence of comprehensive "switching" to generic versions, notably in Latin America, it would be worthwhile to establish cause-effect relationships between pharmaceutical policies and uptake of generic medicines. The absence of change in the generic medicines market share in other countries suggests that, at a minimum, generic medicines have not been strongly promoted.

Generics, Supergenerics and Patent Strategies--SMi's 13th Annual Meeting.

PubMed

Edwards, Catherine

2010-07-01

SMi's 13th Annual Meeting on Generics, Supergenerics and Patent Strategies, held in London, included topics covering new trends in the generics field, the difficulties faced by companies in entering the generics market and recent developments in IP. This conference report highlights selected presentations on generics in India, protecting pharmaceutical products in China, changes in generics law and litigation in the US and Europe, challenges for market selection and entry for generics companies, the influence of changes in the healthcare market on the generics industry, supergenerics, and biosimilars.

From the physics of interacting polymers to optimizing routes on the London Underground

PubMed Central

Yeung, Chi Ho; Saad, David; Wong, K. Y. Michael

2013-01-01

Optimizing paths on networks is crucial for many applications, ranging from subway traffic to Internet communication. Because global path optimization that takes account of all path choices simultaneously is computationally hard, most existing routing algorithms optimize paths individually, thus providing suboptimal solutions. We use the physics of interacting polymers and disordered systems to analyze macroscopic properties of generic path optimization problems and derive a simple, principled, generic, and distributed routing algorithm capable of considering all individual path choices simultaneously. We demonstrate the efficacy of the algorithm by applying it to: (i) random graphs resembling Internet overlay networks, (ii) travel on the London Underground network based on Oyster card data, and (iii) the global airport network. Analytically derived macroscopic properties give rise to insightful new routing phenomena, including phase transitions and scaling laws, that facilitate better understanding of the appropriate operational regimes and their limitations, which are difficult to obtain otherwise. PMID:23898198

From the physics of interacting polymers to optimizing routes on the London Underground.

PubMed

Yeung, Chi Ho; Saad, David; Wong, K Y Michael

2013-08-20

Optimizing paths on networks is crucial for many applications, ranging from subway traffic to Internet communication. Because global path optimization that takes account of all path choices simultaneously is computationally hard, most existing routing algorithms optimize paths individually, thus providing suboptimal solutions. We use the physics of interacting polymers and disordered systems to analyze macroscopic properties of generic path optimization problems and derive a simple, principled, generic, and distributed routing algorithm capable of considering all individual path choices simultaneously. We demonstrate the efficacy of the algorithm by applying it to: (i) random graphs resembling Internet overlay networks, (ii) travel on the London Underground network based on Oyster card data, and (iii) the global airport network. Analytically derived macroscopic properties give rise to insightful new routing phenomena, including phase transitions and scaling laws, that facilitate better understanding of the appropriate operational regimes and their limitations, which are difficult to obtain otherwise.

Generic functional requirements for a NASA general-purpose data base management system

NASA Technical Reports Server (NTRS)

Lohman, G. M.

1981-01-01

Generic functional requirements for a general-purpose, multi-mission data base management system (DBMS) for application to remotely sensed scientific data bases are detailed. The motivation for utilizing DBMS technology in this environment is explained. The major requirements include: (1) a DBMS for scientific observational data; (2) a multi-mission capability; (3) user-friendly; (4) extensive and integrated information about data; (5) robust languages for defining data structures and formats; (6) scientific data types and structures; (7) flexible physical access mechanisms; (8) ways of representing spatial relationships; (9) a high level nonprocedural interactive query and data manipulation language; (10) data base maintenance utilities; (11) high rate input/output and large data volume storage; and adaptability to a distributed data base and/or data base machine configuration. Detailed functions are specified in a top-down hierarchic fashion. Implementation, performance, and support requirements are also given.

Convection driven generation of long-range material gradients

PubMed Central

Du, Yanan; Hancock, Matthew J.; He, Jiankang; Villa-Uribe, Jose; Wang, Ben; Cropek, Donald M.; Khademhosseini, Ali

2009-01-01

Natural materials exhibit anisotropy with variations in soluble factors, cell distribution, and matrix properties. The ability to recreate the heterogeneity of the natural materials is a major challenge for investigating cell-material interactions and for developing biomimetic materials. Here we present a generic fluidic approach using convection and alternating flow to rapidly generate multi-centimeter gradients of biomolecules, polymers, beads and cells and cross-gradients of two species in a microchannel. Accompanying theoretical estimates and simulations of gradient growth provide design criteria over a range of material properties. A poly(ethyleneglycol) hydrogel gradient, a porous collagen gradient and a composite material with a hyaluronic acid/gelatin cross-gradient were generated with continuous variations in material properties and in their ability to regulate cellular response. This simple yet generic fluidic platform should prove useful for creating anisotropic biomimetic materials and high-throughput platforms for investigating cell-microenvironment interaction. PMID:20035990

A sample implementation for parallelizing Divide-and-Conquer algorithms on the GPU.

PubMed

Mei, Gang; Zhang, Jiayin; Xu, Nengxiong; Zhao, Kunyang

2018-01-01

The strategy of Divide-and-Conquer (D&C) is one of the frequently used programming patterns to design efficient algorithms in computer science, which has been parallelized on shared memory systems and distributed memory systems. Tzeng and Owens specifically developed a generic paradigm for parallelizing D&C algorithms on modern Graphics Processing Units (GPUs). In this paper, by following the generic paradigm proposed by Tzeng and Owens, we provide a new and publicly available GPU implementation of the famous D&C algorithm, QuickHull, to give a sample and guide for parallelizing D&C algorithms on the GPU. The experimental results demonstrate the practicality of our sample GPU implementation. Our research objective in this paper is to present a sample GPU implementation of a classical D&C algorithm to help interested readers to develop their own efficient GPU implementations with fewer efforts.

Indirect (source-free) integration method. I. Wave-forms from geodesic generic orbits of EMRIs

NASA Astrophysics Data System (ADS)

Ritter, Patxi; Aoudia, Sofiane; Spallicci, Alessandro D. A. M.; Cordier, Stéphane

2016-12-01

The Regge-Wheeler-Zerilli (RWZ) wave-equation describes Schwarzschild-Droste black hole perturbations. The source term contains a Dirac distribution and its derivative. We have previously designed a method of integration in time domain. It consists of a finite difference scheme where analytic expressions, dealing with the wave-function discontinuity through the jump conditions, replace the direct integration of the source and the potential. Herein, we successfully apply the same method to the geodesic generic orbits of EMRI (Extreme Mass Ratio Inspiral) sources, at second order. An EMRI is a Compact Star (CS) captured by a Super-Massive Black Hole (SMBH). These are considered the best probes for testing gravitation in strong regime. The gravitational wave-forms, the radiated energy and angular momentum at infinity are computed and extensively compared with other methods, for different orbits (circular, elliptic, parabolic, including zoom-whirl).

A common mode of origin of power laws in models of market and earthquake

NASA Astrophysics Data System (ADS)

Bhattacharyya, Pratip; Chatterjee, Arnab; Chakrabarti, Bikas K.

2007-07-01

We show that there is a common mode of origin for the power laws observed in two different models: (i) the Pareto law for the distribution of money among the agents with random-saving propensities in an ideal gas-like market model and (ii) the Gutenberg-Richter law for the distribution of overlaps in a fractal-overlap model for earthquakes. We find that the power laws appear as the asymptotic forms of ever-widening log-normal distributions for the agents’ money and the overlap magnitude, respectively. The identification of the generic origin of the power laws helps in better understanding and in developing generalized views of phenomena in such diverse areas as economics and geophysics.

A Coordinated Initialization Process for the Distributed Space Exploration Simulation (DSES)

NASA Technical Reports Server (NTRS)

Phillips, Robert; Dexter, Dan; Hasan, David; Crues, Edwin Z.

2007-01-01

This document describes the federate initialization process that was developed at the NASA Johnson Space Center with the HIIA Transfer Vehicle Flight Controller Trainer (HTV FCT) simulations and refined in the Distributed Space Exploration Simulation (DSES). These simulations use the High Level Architecture (HLA) IEEE 1516 to provide the communication and coordination between the distributed parts of the simulation. The purpose of the paper is to describe a generic initialization sequence that can be used to create a federate that can: 1. Properly initialize all HLA objects, object instances, interactions, and time management 2. Check for the presence of all federates 3. Coordinate startup with other federates 4. Robustly initialize and share initial object instance data with other federates.

Exploring stellar evolution with gravitational-wave observations

NASA Astrophysics Data System (ADS)

Dvorkin, Irina; Uzan, Jean-Philippe; Vangioni, Elisabeth; Silk, Joseph

2018-05-01

Recent detections of gravitational waves from merging binary black holes opened new possibilities to study the evolution of massive stars and black hole formation. In particular, stellar evolution models may be constrained on the basis of the differences in the predicted distribution of black hole masses and redshifts. In this work we propose a framework that combines galaxy and stellar evolution models and use it to predict the detection rates of merging binary black holes for various stellar evolution models. We discuss the prospects of constraining the shape of the time delay distribution of merging binaries using just the observed distribution of chirp masses. Finally, we consider a generic model of primordial black hole formation and discuss the possibility of distinguishing it from stellar-origin black holes.

The effect of source credibility on consumers' perceptions of the quality of health information on the Internet.

PubMed

Bates, Benjamin R; Romina, Sharon; Ahmed, Rukhsana; Hopson, Danielle

2006-03-01

Recent use of the Internet as a source of health information has raised concerns about consumers' ability to tell 'good' information from 'bad' information. Although consumers report that they use source credibility to judge information quality, several observational studies suggest that consumers make little use of source credibility. This study examines consumer evaluations of web pages attributed to a credible source as compared to generic web pages on measures of message quality. In spring 2005, a community-wide convenience survey was distributed in a regional hub city in Ohio, USA. 519 participants were randomly assigned one of six messages discussing lung cancer prevention: three messages each attributed to a highly credible national organization and three identical messages each attributed to a generic web page. Independent sample t-tests were conducted to compare each attributed message to its counterpart attributed to a generic web page on measures of trustworthiness, truthfulness, readability, and completeness. The results demonstrated that differences in attribution to a source did not have a significant effect on consumers' evaluations of the quality of the information.Conclusions. The authors offer suggestions for national organizations to promote credibility to consumers as a heuristic for choosing better online health information through the use of media co-channels to emphasize credibility.

Brand vs generic adverse event reporting patterns: An authorized generic-controlled evaluation of cardiovascular medications.

PubMed

Alatawi, Y; Rahman, Md M; Cheng, N; Qian, J; Peissig, P L; Berg, R L; Page, C D; Hansen, R A

2018-06-01

Some public scepticism exists about generics in terms of whether brand and generic drugs produce identical outcomes. This study explores whether adverse event (AE) reporting patterns are similar between brand and generic drugs, using authorized generics (AGs) as a control for possible generic drug perception biases. Events reported to the FDA Adverse Event Reporting System from the years 2004-2015 were analysed. Drugs were classified as brand, AG or generic based on drug and manufacturer names. Reports were included if amlodipine, losartan, metoprolol extended release (ER) or simvastatin were listed as primary or secondary suspect drugs. Disproportionality analyses using the reporting odds ratio (ROR) assessed the relative rate of reporting labelled AEs compared to reporting these AEs with all other drugs. The Breslow-Day test compared RORs across brand, AG and generic. Interrupted time series analysis evaluated the impact of generic entry on reporting trends. Generics accounted for significant percentages of total U.S. reports, but AGs accounted for smaller percentages of reports, including for amlodipine (14.26%), losartan (1.48%), metoprolol ER (0.35%) and simvastatin (0.70%). Whereas the RORs were significantly different for multiple brand vs generic comparisons, the AG vs generic comparisons yielded fewer statistically significant findings. Namely, only the ROR for AG differed from generic for amlodipine with peripheral oedema (P < .01). Inconsistent reporting patterns were observed more between brand and generic compared with AG and generic. Use of AGs as a control for perception biases against generics is useful, but this approach can be limited by small AG report numbers. Requiring the manufacturer name to be printed on the prescription bottle or packaging could improve the accuracy of assignment for products being reported. © 2017 John Wiley & Sons Ltd.

Performance Assessments of Generic Nuclear Waste Repositories in Shale

NASA Astrophysics Data System (ADS)

Stein, E. R.; Sevougian, S. D.; Mariner, P. E.; Hammond, G. E.; Frederick, J.

2017-12-01

Simulations of deep geologic disposal of nuclear waste in a generic shale formation showcase Geologic Disposal Safety Assessment (GDSA) Framework, a toolkit for repository performance assessment (PA) whose capabilities include domain discretization (Cubit), multiphysics simulations (PFLOTRAN), uncertainty and sensitivity analysis (Dakota), and visualization (Paraview). GDSA Framework is used to conduct PAs of two generic repositories in shale. The first considers the disposal of 22,000 metric tons heavy metal of commercial spent nuclear fuel. The second considers disposal of defense-related spent nuclear fuel and high level waste. Each PA accounts for the thermal load and radionuclide inventory of applicable waste types, components of the engineered barrier system, and components of the natural barrier system including the host rock shale and underlying and overlying stratigraphic units. Model domains are half-symmetry, gridded with Cubit, and contain between 7 and 22 million grid cells. Grid refinement captures the detail of individual waste packages, emplacement drifts, access drifts, and shafts. Simulations are run in a high performance computing environment on as many as 2048 processes. Equations describing coupled heat and fluid flow and reactive transport are solved with PFLOTRAN, an open-source, massively parallel multiphase flow and reactive transport code. Additional simulated processes include waste package degradation, waste form dissolution, radioactive decay and ingrowth, sorption, solubility, advection, dispersion, and diffusion. Simulations are run to 106 y, and radionuclide concentrations are observed within aquifers at a point approximately 5 km downgradient of the repository. Dakota is used to sample likely ranges of input parameters including waste form and waste package degradation rates and properties of engineered and natural materials to quantify uncertainty in predicted concentrations and sensitivity to input parameters. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. SAND2017- 8305 A

Random Wiring, Ganglion Cell Mosaics, and the Functional Architecture of the Visual Cortex

PubMed Central

Coppola, David; White, Leonard E.; Wolf, Fred

2015-01-01

The architecture of iso-orientation domains in the primary visual cortex (V1) of placental carnivores and primates apparently follows species invariant quantitative laws. Dynamical optimization models assuming that neurons coordinate their stimulus preferences throughout cortical circuits linking millions of cells specifically predict these invariants. This might indicate that V1’s intrinsic connectome and its functional architecture adhere to a single optimization principle with high precision and robustness. To validate this hypothesis, it is critical to closely examine the quantitative predictions of alternative candidate theories. Random feedforward wiring within the retino-cortical pathway represents a conceptually appealing alternative to dynamical circuit optimization because random dimension-expanding projections are believed to generically exhibit computationally favorable properties for stimulus representations. Here, we ask whether the quantitative invariants of V1 architecture can be explained as a generic emergent property of random wiring. We generalize and examine the stochastic wiring model proposed by Ringach and coworkers, in which iso-orientation domains in the visual cortex arise through random feedforward connections between semi-regular mosaics of retinal ganglion cells (RGCs) and visual cortical neurons. We derive closed-form expressions for cortical receptive fields and domain layouts predicted by the model for perfectly hexagonal RGC mosaics. Including spatial disorder in the RGC positions considerably changes the domain layout properties as a function of disorder parameters such as position scatter and its correlations across the retina. However, independent of parameter choice, we find that the model predictions substantially deviate from the layout laws of iso-orientation domains observed experimentally. Considering random wiring with the currently most realistic model of RGC mosaic layouts, a pairwise interacting point process, the predicted layouts remain distinct from experimental observations and resemble Gaussian random fields. We conclude that V1 layout invariants are specific quantitative signatures of visual cortical optimization, which cannot be explained by generic random feedforward-wiring models. PMID:26575467

Comparison of Generic-to-Brand Switchback Rates Between Generic and Authorized Generic Drugs.

PubMed

Hansen, Richard A; Qian, Jingjing; Berg, Richard; Linneman, James; Seoane-Vazquez, Enrique; Dutcher, Sarah K; Raofi, Saeid; Page, C David; Peissig, Peggy

2017-04-01

Generic drugs contain identical active ingredients as their corresponding brand drugs and are pharmaceutically equivalent and bioequivalent, whereas authorized generic drugs (AGs) contain both identical active and inactive ingredients as their corresponding brand drugs but are marketed as generics. This study compares generic-to-brand switchback rates between generic and AGs. Retrospective cohort study. Claims and electronic health record data from a regional U.S. health care system. The full cohort consisted of 5542 unique patients who received select branded drugs during the 6 months prior to their generic drug market availability (between 1999 and 2014) and then were switched to an AG or generic drug within 30 months of generic drug entry. For these patients, 5929 unique patient-drug combinations (867 with AGs and 5062 with generic drugs) were evaluated. Ten drugs with AGs and generics marketed between 1999 and 2014 were evaluated. The date of the first generic prescription was considered the index date for each drug, and it marked the beginning of follow-up to evaluate the occurrence of generic-to-brand switchback patterns over the subsequent 30 months. Switchback rates were compared between patients receiving AGs versus those receiving generics using multivariable Cox proportional hazards models, controlling for individual drug effects, age, sex, Charlson Comorbidity Score, pre-index drug use characteristics, and pre-index health care utilization. Among the 5542 unique patients who switched from brand to generic or brand to AG, 264 (4.8%) switched back to the brand drug. Overall switchback rates were similar for AGs compared with generics (hazard ratio [HR] 0.86, 95% confidence interval [CI] 0.65-1.15). The likelihood of switchback was higher for alendronate (HR 1.64, 95% CI 1.20-2.23) and simvastatin (HR 1.81, 95% CI 1.30-2.54) and lower for amlodipine (HR 0.27, 95% CI 0.17-0.42) compared with the other drugs evaluated. Overall switchback rates were similar between AG and generic drug users, indirectly supporting similar efficacy and tolerability profiles for brand and generic drugs. Reasons for differences in switchback rates among specific products need to be explored further. © 2017 Pharmacotherapy Publications, Inc.

Encouraging generic use can yield significant savings.

PubMed

Zimmerman, Christina

2012-11-01

Key findings. (1) Zero copayment for generic drugs is the greatest influencer of generic statin utilization. (2) Both higher copayments for generic drugs and lower copayments for competing brands are associated with a decreased probability of using generic statins. (3) Prior authorization and step therapy requirements for brand-name statins are associated with an increased use of generic drugs. (4) Greater use of generic statins should reduce costs for patients, plans, and Medicare.

27 CFR 4.24 - Generic, semi-generic, and non-generic designations of geographic significance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Generic, semi-generic, and non-generic designations of geographic significance. 4.24 Section 4.24 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND...

Generic drugs in Brazil: known by many, used by few.

PubMed

Bertoldi, Andréa D; Barros, Aluísio J D; Hallal, Pedro C

2005-01-01

This study evaluated knowledge and use of generic drugs in a population-based sample of adults from a southern Brazilian city. The outcomes were: the proportion of generics in total medicines used; theoretical and practical knowledge about generics; and strategies used to buy medicines on medical prescriptions. The recall period for drug utilization was 15 days. The proportion of generics in total medicines was 3.9%. While 86.0% knew that generics cost less and 70.0% that the quality is similar to brand name medicines, only 57.0% knew any packaging characteristics that distinguish generics from other medicines. The highest proportion of generic drug utilization was in the antimicrobial pharmacological group. A brand name medicine (with a brand similar to the generic name) was mistakenly classified as a generic through photos by 48.0% of the interviewees. Among subjects who bought medicines in the 15-day period, 18.9% reported buying a generic, but this result should be interpreted with caution, because the population frequently fails to differentiate between generics and other medicines.

Comparison of brand versus generic antiepileptic drug adverse event reporting rates in the U.S. Food and Drug Administration Adverse Event Reporting System (FAERS).

PubMed

Rahman, Md Motiur; Alatawi, Yasser; Cheng, Ning; Qian, Jingjing; Plotkina, Annya V; Peissig, Peggy L; Berg, Richard L; Page, David; Hansen, Richard A

2017-09-01

Despite the cost saving role of generic anti-epileptic drugs (AEDs), debate exists as to whether generic substitution of branded AEDs may lead to therapeutic failure and increased toxicity. This study compared adverse event (AE) reporting rates for brand vs. authorized generic (AG) vs. generic AEDs. Since AGs are pharmaceutically identical to brand but perceived as generics, the generic vs. AG comparison minimized potential bias against generics. Events reported to the U.S. Food and Drug Administration Adverse Event Reporting System between January 2004 to March 2015 with lamotrigine, carbamazepine, and oxcarbazepine listed as primary or secondary suspect were classified as brand, generic, or AG based on the manufacturer. Disproportionality analyses using the reporting odds ratio (ROR) assessed the relative rate of reporting of labeled AEs compared to reporting these events with all other drugs. The Breslow-Day statistic compared RORs across brand, AG, and other generics using a Bonferroni-corrected P<0.01. A total of 27,150 events with lamotrigine, 13,950 events with carbamazepine, and 5077 events with oxcarbazepine were reported, with generics accounting for 27%, 41%, and 32% of reports, respectively. Although RORs for the majority of known AEs were different between brand and generics for all three drugs of interest (Breslow-Day P<0.001), RORs generally were similar for AG and generic comparisons. Generic lamotrigine and carbamazepine were more commonly involved in reports of suicide or suicidal ideation compared with the respective AGs based on a multiple comparison-adjusted P<0.01. Similar AED reporting rates were observed for the AG and generic comparisons for most outcomes and drugs, suggesting that brands and generics have similar reporting rates after accounting for generic perception biases. Disproportional suicide reporting was observed for generics compared with AGs and brand, although this finding needs further study. Copyright © 2017 Elsevier B.V. All rights reserved.

Quality assurance of intensity-modulated radiation therapy.

PubMed

Palta, Jatinder R; Liu, Chihray; Li, Jonathan G

2008-01-01

The current paradigm for the quality assurance (QA) program for intensity-modulated radiation therapy (IMRT) includes QA of the treatment planning system, QA of the delivery system, and patient-specific QA. Although the IMRT treatment planning and delivery system is the same as for conventional three-dimensional conformal radiation therapy, it has more parameters to coordinate and verify. Because of complex beam intensity modulation, each IMRT field often includes many small irregular off-axis fields, resulting in isodose distributions for each IMRT plan that are more conformal than those from conventional treatment plans. Therefore, these features impose a new and more stringent set of QA requirements for IMRT planning and delivery. The generic test procedures to validate dose calculation and delivery accuracy for both treatment planning and IMRT delivery have to be customized for each type of IMRT planning and delivery strategy. The rationale for such an approach is that the overall accuracy of IMRT delivery is incumbent on the piecewise uncertainties in both the planning and delivery processes. The end user must have well-defined evaluation criteria for each element of the planning and delivery process. Such information can potentially be used to determine a priori the accuracy of IMRT planning and delivery.

AEOSS runtime manual for system analysis on Advanced Earth-Orbital Spacecraft Systems

NASA Technical Reports Server (NTRS)

Lee, Hwa-Ping

1990-01-01

Advanced earth orbital spacecraft system (AEOSS) enables users to project the required power, weight, and cost for a generic earth-orbital spacecraft system. These variables are calculated on the component and subsystem levels, and then the system level. The included six subsystems are electric power, thermal control, structure, auxiliary propulsion, attitude control, and communication, command, and data handling. The costs are computed using statistically determined models that were derived from the flown spacecraft in the past and were categorized into classes according to their functions and structural complexity. Selected design and performance analyses for essential components and subsystems are also provided. AEOSS has the feature permitting a user to enter known values of these parameters, totally and partially, at all levels. All information is of vital importance to project managers of subsystems or a spacecraft system. AEOSS is a specially tailored software coded from the relational database program of the Acius' 4th Dimension with a Macintosh version. Because of the licensing agreements, two versions of the AEOSS documents were prepared. This version, AEOSS Runtime Manual, is permitted to be distributed with a finite number of the restrictive 4D Runtime version. It can perform all contained applications without any programming alterations.

Permutation inference for the general linear model

PubMed Central

Winkler, Anderson M.; Ridgway, Gerard R.; Webster, Matthew A.; Smith, Stephen M.; Nichols, Thomas E.

2014-01-01

Permutation methods can provide exact control of false positives and allow the use of non-standard statistics, making only weak assumptions about the data. With the availability of fast and inexpensive computing, their main limitation would be some lack of flexibility to work with arbitrary experimental designs. In this paper we report on results on approximate permutation methods that are more flexible with respect to the experimental design and nuisance variables, and conduct detailed simulations to identify the best method for settings that are typical for imaging research scenarios. We present a generic framework for permutation inference for complex general linear models (glms) when the errors are exchangeable and/or have a symmetric distribution, and show that, even in the presence of nuisance effects, these permutation inferences are powerful while providing excellent control of false positives in a wide range of common and relevant imaging research scenarios. We also demonstrate how the inference on glm parameters, originally intended for independent data, can be used in certain special but useful cases in which independence is violated. Detailed examples of common neuroimaging applications are provided, as well as a complete algorithm – the “randomise” algorithm – for permutation inference with the glm. PMID:24530839

Self-avoiding walks on scale-free networks

NASA Astrophysics Data System (ADS)

Herrero, Carlos P.

2005-01-01

Several kinds of walks on complex networks are currently used to analyze search and navigation in different systems. Many analytical and computational results are known for random walks on such networks. Self-avoiding walks (SAW’s) are expected to be more suitable than unrestricted random walks to explore various kinds of real-life networks. Here we study long-range properties of random SAW’s on scale-free networks, characterized by a degree distribution P (k) ˜ k-γ . In the limit of large networks (system size N→∞ ), the average number sn of SAW’s starting from a generic site increases as μn , with μ= < k2 > / -1 . For finite N , sn is reduced due to the presence of loops in the network, which causes the emergence of attrition of the paths. For kinetic growth walks, the average maximum length increases as a power of the system size: ˜ Nα , with an exponent α increasing as the parameter γ is raised. We discuss the dependence of α on the minimum allowed degree in the network. A similar power-law dependence is found for the mean self-intersection length of nonreversal random walks. Simulation results support our approximate analytical calculations.

An intelligent surveillance platform for large metropolitan areas with dense sensor deployment.

PubMed

Fernández, Jorge; Calavia, Lorena; Baladrón, Carlos; Aguiar, Javier M; Carro, Belén; Sánchez-Esguevillas, Antonio; Alonso-López, Jesus A; Smilansky, Zeev

2013-06-07

This paper presents an intelligent surveillance platform based on the usage of large numbers of inexpensive sensors designed and developed inside the European Eureka Celtic project HuSIMS. With the aim of maximizing the number of deployable units while keeping monetary and resource/bandwidth costs at a minimum, the surveillance platform is based on the usage of inexpensive visual sensors which apply efficient motion detection and tracking algorithms to transform the video signal in a set of motion parameters. In order to automate the analysis of the myriad of data streams generated by the visual sensors, the platform's control center includes an alarm detection engine which comprises three components applying three different Artificial Intelligence strategies in parallel. These strategies are generic, domain-independent approaches which are able to operate in several domains (traffic surveillance, vandalism prevention, perimeter security, etc.). The architecture is completed with a versatile communication network which facilitates data collection from the visual sensors and alarm and video stream distribution towards the emergency teams. The resulting surveillance system is extremely suitable for its deployment in metropolitan areas, smart cities, and large facilities, mainly because cheap visual sensors and autonomous alarm detection facilitate dense sensor network deployments for wide and detailed coverage.

Detection of tau neutrinos by imaging air Cherenkov telescopes

NASA Astrophysics Data System (ADS)

Góra, D.; Bernardini, E.

2016-09-01

This paper investigates the potential to detect tau neutrinos in the energy range of 1-1000 PeV searching for very inclined showers with imaging Cherenkov telescopes. A neutrino induced tau lepton escaping from the Earth may decay and initiate an air shower which can be detected by a fluorescence or Cherenkov telescope. We present here a study of the detection potential of Earth-skimming neutrinos taking into account neutrino interactions in the Earth crust, local matter distributions at various detector sites, the development of tau-induced showers in air and the detection of Cherenkov photons with IACTs. We analyzed simulated shower images on the camera focal plane and implemented generic reconstruction chains based on Hillas parameters. We find that present IACTs can distinguish air showers induced by tau neutrinos from the background of hadronic showers in the PeV-EeV energy range. We present the neutrino trigger efficiency obtained for a few configurations being considered for the next-generation Cherenkov telescopes, i.e. the Cherenkov Telescope Array. Finally, for a few representative neutrino spectra expected from astrophysical sources, we compare the expected event rates at running IACTs to what is expected for the dedicated IceCube neutrino telescope.

Knowledge, perceptions and use of generic drugs: a cross sectional study

PubMed Central

de Lira, Claudio Andre Barbosa; Oliveira, Jéssica Nathalia Soares; Andrade, Marília dos Santos; Vancini-Campanharo, Cássia Regina; Vancini, Rodrigo Luiz

2014-01-01

Objective To assess the level of knowledge, perceptions and usage profile for generic drugs among laypersons. Methods A cross-sectional study was conducted with 278 volunteers (180 women and 98 men, aged 37.1±15.8 years). A questionnaire was drawn up with questions on their use, perceptions and knowledge of generic drugs. Results Most respondents (99.6%) knew that generic drugs exist, but only 48.6% were able to define them correctly, while 78.8% of the respondents had some information about generics. This information was obtained mainly through television (49.3%). In terms of generic drug characteristics, 79.1% stated that they were confident about their efficacy, 74.8% believed that generic drugs have the same effect as branded medications, 88.8% said that generics were priced lower than branded medications, and 80.2% stated that they bought generic drugs because of price. With regard to drugs prescribed by medical practitioners, 17.6% of the participants said that their doctors never prescribed generics and only 7.5% confirmed that their doctors always prescribed generics. Conclusion For the lay public, the sample in this study has sufficient knowledge of generic drugs in terms of definition, efficacy and cost. Consequently, the volunteers interviewed are very likely to use generics. Furthermore, the results of this study indicate that programs should be implemented in order to boost generic drug prescriptions by medical practitioners. PMID:25295444

Dichotomous-noise-induced pattern formation in a reaction-diffusion system

NASA Astrophysics Data System (ADS)

Das, Debojyoti; Ray, Deb Shankar

2013-06-01

We consider a generic reaction-diffusion system in which one of the parameters is subjected to dichotomous noise by controlling the flow of one of the reacting species in a continuous-flow-stirred-tank reactor (CSTR) -membrane reactor. The linear stability analysis in an extended phase space is carried out by invoking Furutzu-Novikov procedure for exponentially correlated multiplicative noise to derive the instability condition in the plane of the noise parameters (correlation time and strength of the noise). We demonstrate that depending on the correlation time an optimal strength of noise governs the self-organization. Our theoretical analysis is corroborated by numerical simulations on pattern formation in a chlorine-dioxide-iodine-malonic acid reaction-diffusion system.

Spontaneous PT-Symmetry Breaking for Systems of Noncommutative Euclidean Lie Algebraic Type

NASA Astrophysics Data System (ADS)

Dey, Sanjib; Fring, Andreas; Mathanaranjan, Thilagarajah

2015-11-01

We propose a noncommutative version of the Euclidean Lie algebra E 2. Several types of non-Hermitian Hamiltonian systems expressed in terms of generic combinations of the generators of this algebra are investigated. Using the breakdown of the explicitly constructed Dyson maps as a criterium, we identify the domains in the parameter space in which the Hamiltonians have real energy spectra and determine the exceptional points signifying the crossover into the different types of spontaneously broken PT-symmetric regions with pairs of complex conjugate eigenvalues. We find exceptional points which remain invariant under the deformation as well as exceptional points becoming dependent on the deformation parameter of the algebra.

FAST TRACK COMMUNICATION: Phenomenology of the equivalence principle with light scalars

NASA Astrophysics Data System (ADS)

Damour, Thibault; Donoghue, John F.

2010-10-01

Light scalar particles with couplings of sub-gravitational strength, which can generically be called 'dilatons', can produce violations of the equivalence principle. However, in order to understand experimental sensitivities one must know the coupling of these scalars to atomic systems. We report here on a study of the required couplings. We give a general Lagrangian with five independent dilaton parameters and calculate the 'dilaton charge' of atomic systems for each of these. Two combinations are particularly important. One is due to the variations in the nuclear binding energy, with a sensitivity scaling with the atomic number as A-1/3. The other is due to electromagnetism. We compare limits on the dilaton parameters from existing experiments.

MRAC Control with Prior Model Knowledge for Asymmetric Damaged Aircraft

PubMed Central

Zhang, Jing

2015-01-01

This paper develops a novel state-tracking multivariable model reference adaptive control (MRAC) technique utilizing prior knowledge of plant models to recover control performance of an asymmetric structural damaged aircraft. A modification of linear model representation is given. With prior knowledge on structural damage, a polytope linear parameter varying (LPV) model is derived to cover all concerned damage conditions. An MRAC method is developed for the polytope model, of which the stability and asymptotic error convergence are theoretically proved. The proposed technique reduces the number of parameters to be adapted and thus decreases computational cost and requires less input information. The method is validated by simulations on NASA generic transport model (GTM) with damage. PMID:26180839

What use is generic prescribing?

PubMed Central

Archer, Michael

1985-01-01

The dispensing of generic preparations at four dispensing chemist shops was investigated by means of a questionnaire. Certain generic prescriptions result in the dispensing of proprietary products despite the existence of generic preparations, and the pharmacist may be reimbursed for the cost of the proprietary drug which has been dispensed. Not all generic prescriptions result in the dispensing of cheaper drugs because of the methods of payment to chemists. If doctors write more generic prescriptions there will ultimately be more dispensing of generic products. Even in the case of drugs still under patent, prescribing by generic name should be encouraged. The savings achieved by generic prescribing are to some extent at the cost of the dispensing chemists. The method and scale of payments for dispensing requires urgent review. PMID:4032358

Generic lamotrigine versus brand-name Lamictal bioequivalence in patients with epilepsy: A field test of the FDA bioequivalence standard.

PubMed

Ting, Tricia Y; Jiang, Wenlei; Lionberger, Robert; Wong, Jessica; Jones, Jace W; Kane, Maureen A; Krumholz, Allan; Temple, Robert; Polli, James E

2015-09-01

To test the current U.S. Food and Drug Administration (FDA) bioequivalence standard in a comparison of generic and brand-name drug pharmacokinetic (PK) performance in "generic-brittle" patients with epilepsy under clinical use conditions. This randomized, double-blind, multiple-dose, steady-state, fully replicated bioequivalence study compared generic lamotrigine to brand-name Lamictal in "generic-brittle" patients with epilepsy (n = 34) who were already taking lamotrigine. Patients were repeatedly switched between masked Lamictal and generic lamotrigine. Intensive PK blood sampling at the end of each 2-week treatment period yielded two 12-h PK profiles for brand-name and generic forms for each patient. Steady-state area under the curve (AUC), peak plasma concentration (Cmax ), and minimum plasma concentration (Cmin ) data were subjected to conventional average bioequivalence (ABE) analysis, reference-scaled ABE analysis, and within-subject variability (WSV) comparisons. In addition, generic-versus-brand comparisons in individual patients were performed. Secondary clinical outcomes included seizure frequency and adverse events. Generic demonstrated bioequivalence to brand. The 90% confidence intervals of the mean for steady-state AUC, Cmax , and Cmin for generic-versus-brand were 97.2-101.6%, 98.8-104.5%, and 93.4-101.0%, respectively. The WSV of generic and brand were also similar. Individual patient PK ratios for generic-versus-brand were similar but not identical, in part because brand-versus-brand profiles were not identical, even though subjects were rechallenged with the same product. Few subjects had seizure exacerbations or tolerability issues with product switching. One subject, however, reported 267 focal motor seizures, primarily on generic, although his brand and generic PK profiles were practically identical. Some neurologists question whether bioequivalence in healthy volunteers ensures therapeutic equivalence of brand and generic antiepileptic drugs in patients with epilepsy, who may be at increased risk for problems with brand-to-generic switching. Bioequivalence results in "generic-brittle" patients with epilepsy under clinical conditions support the soundness of the FDA bioequivalence standards. Adverse events on generic were not related to the small, allowable PK differences between generic and brand. Wiley Periodicals, Inc. © 2015 International League Against Epilepsy.

Impact of medicare part D plan features on use of generic drugs.

PubMed

Tang, Yan; Gellad, Walid F; Men, Aiju; Donohue, Julie M

2014-06-01

Little is known about how Medicare Part D plan features influence choice of generic versus brand drugs. To examine the association between Part D plan features and generic medication use. Data from a 2009 random sample of 1.6 million fee-for-service, Part D enrollees aged 65 years and above, who were not dually eligible or receiving low-income subsidies, were used to examine the association between plan features (generic cost-sharing, difference in brand and generic copay, prior authorization, step therapy) and choice of generic antidepressants, antidiabetics, and statins. Logistic regression models accounting for plan-level clustering were adjusted for sociodemographic and health status. Generic cost-sharing ranged from $0 to $9 for antidepressants and statins, and from $0 to $8 for antidiabetics (across 5th-95th percentiles). Brand-generic cost-sharing differences were smallest for statins (5th-95th percentiles: $16-$37) and largest for antidepressants ($16-$64) across plans. Beneficiaries with higher generic cost-sharing had lower generic use [adjusted odds ratio (OR)=0.97, 95% confidence interval (CI), 0.95-0.98 for antidepressants; OR=0.97, 95% CI, 0.96-0.98 for antidiabetics; OR=0.94, 95% CI, 0.92-0.95 for statins]. Larger brand-generic cost-sharing differences and prior authorization were significantly associated with greater generic use in all categories. Plans could increase generic use by 5-12 percentage points by reducing generic cost-sharing from the 75th ($7) to 25th percentiles ($4-$5), increasing brand-generic cost-sharing differences from the 25th ($25-$26) to 75th ($32-$33) percentiles, and using prior authorization and step therapy. Cost-sharing features and utilization management tools were significantly associated with generic use in 3 commonly used medication categories.

Do higher-priced generic medicines enjoy a competitive advantage under reference pricing?

PubMed

Puig-Junoy, Jaume

2012-11-01

In many countries with generic reference pricing, generic producers and distributors compete by means of undisclosed discounts offered to pharmacies in order to reduce acquisition costs and to induce them to dispense their generic to patients in preference over others. The objective of this article is to test the hypothesis that under prevailing reference pricing systems for generic medicines, those medicines sold at a higher consumer price may enjoy a competitive advantage. Real transaction prices for 179 generic medicines acquired by pharmacies in Spain have been used to calculate the discount rate on acquisition versus reimbursed costs to pharmacies. Two empirical hypotheses are tested: the discount rate at which pharmacies acquire generic medicines is higher for those pharmaceutical presentations for which there are more generic competitors; and, the discount rate at which pharmacies acquire generic medicines is higher for those pharmaceutical forms for which the consumer price has declined less in relation to the consumer price of the brand drug before generic entry (higher-priced generic medicines). An average discount rate of 39.3% on acquisition versus reimbursed costs to pharmacies has been observed. The magnitude of the discount positively depends on the number of competitors in the market. The higher the ratio of the consumer price of the generic to that of the brand drug prior to generic entry (i.e. the smaller the price reduction of the generic in relation to the brand drug), the larger the discount rate. Under reference pricing there is intense price competition among generic firms in the form of unusually high discounts to pharmacies on official ex-factory prices reimbursed to pharmacies. However, this effect is highly distorting because it favours those medicines with a higher relative price in relation to the brand price before generic entry.

Questionnaire on the awareness of generic drugs among outpatients and medical staff.

PubMed

Hoshi, S; Kimura, H

2008-06-01

Generic drugs are not as widely used in Japan as they are in the West. The objective of this study was to survey the awareness of generic drugs among outpatients and medical staff and propose methods of promoting the use of generic drugs. Our survey showed that 86.7% of respondents were aware of generic drugs. This is a higher awareness rate than that in a survey of other groups conducted last year. One reason to explain this higher awareness is the recent increase in generic drug advertisements both in newspapers and on television. However, a point of note is that generic drug usage has not increased. Our survey also showed that generic drug awareness was differed widely among age groups, as younger respondents were much more aware of generic drugs than older respondents. Still, about 40% of respondents who were aware of generic drugs did not realize that they were less expensive than name-brand drugs ? including 30% of medical staff. In addition to continuing advertisement of generic drugs in the media, medical doctors and pharmacists should also be encouraged to endorse the use of generic drugs. Furthermore a new system allowing for substitution prescriptions started in April 2008 and consequently pharmacists can now play an important role in promoting the use of generic drugs.

Architecture Analysis of Wireless Power Transmission for Lunar Outposts

DTIC Science & Technology

2015-09-01

through his work on wireless communication using radio wave propagation for both transmitting and receiving high frequency electricity using a focusing...Administration nm nanometers NRC National Research Council PGT platform generic technologies PMAD power management and distribution RF radio frequency xiv...GHz (Marzwell 2008). While the slot antenna can handle frequencies between 70 GHz and 150 GHz, it has been optimized for 94 GHz and has a radio

Fiber optic micromirror sensor for volatile organic compounds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, M.A.; Ricco, A.J.; Buss, R.

With the growing concern over environmental pollution, there is a need for sensors to locate and measure the distribution of a wide range of pollutants. In this paper the authors report a fiber optic sensor, based on a thin film micromirror, which responds to a wide range of volatile organic compounds (VOCs). This generic class of sensor will be useful for monitoring applications where the pollutant has already been identified.

Analysis of French generic medicines retail market: why the use of generic medicines is limited.

PubMed

Dylst, Pieter; Vulto, Arnold; Simoens, Steven

2014-12-01

The market share of generic medicines in France is low compared to other European countries. This perspective paper provides an overview of the generic medicines retail market in France and how the current policy environment may affect the long-term sustainability. Looking at the French generic medicines retail market and the surrounding regulatory framework, all conditions seem to be in place to create a healthy generic medicines market: the country has well-respected regulatory authorities, generic medicines enter the market in a timely manner and prices of generic medicines are competitive compared with other European countries. Despite the success of the demand-side policies targeted at pharmacists and patients, those targeted at physicians were less successful due to a lack of enforcement and a lack of trust in generic medicines by French physicians. Recommendations to increase the use of generic medicines in France round off this perspective paper.

Multiplex networks in metropolitan areas: generic features and local effects.

PubMed

Strano, Emanuele; Shai, Saray; Dobson, Simon; Barthelemy, Marc

2015-10-06

Most large cities are spanned by more than one transportation system. These different modes of transport have usually been studied separately: it is however important to understand the impact on urban systems of coupling different modes and we report in this paper an empirical analysis of the coupling between the street network and the subway for the two large metropolitan areas of London and New York. We observe a similar behaviour for network quantities related to quickest paths suggesting the existence of generic mechanisms operating beyond the local peculiarities of the specific cities studied. An analysis of the betweenness centrality distribution shows that the introduction of underground networks operate as a decentralizing force creating congestion in places located at the end of underground lines. Also, we find that increasing the speed of subways is not always beneficial and may lead to unwanted uneven spatial distributions of accessibility. In fact, for London—but not for New York—there is an optimal subway speed in terms of global congestion. These results show that it is crucial to consider the full, multimodal, multilayer network aspects of transportation systems in order to understand the behaviour of cities and to avoid possible negative side-effects of urban planning decisions. © 2015 The Author(s).

Towards Internet QoS provisioning based on generic distributed QoS adaptive routing engine.

PubMed

Haikal, Amira Y; Badawy, M; Ali, Hesham A

2014-01-01

Increasing efficiency and quality demands of modern Internet technologies drive today's network engineers to seek to provide quality of service (QoS). Internet QoS provisioning gives rise to several challenging issues. This paper introduces a generic distributed QoS adaptive routing engine (DQARE) architecture based on OSPFxQoS. The innovation of the proposed work in this paper is its undependability on the used QoS architectures and, moreover, splitting of the control strategy from data forwarding mechanisms, so we guarantee a set of absolute stable mechanisms on top of which Internet QoS can be built. DQARE architecture is furnished with three relevant traffic control schemes, namely, service differentiation, QoS routing, and traffic engineering. The main objective of this paper is to (i) provide a general configuration guideline for service differentiation, (ii) formalize the theoretical properties of different QoS routing algorithms and then introduce a QoS routing algorithm (QOPRA) based on dynamic programming technique, and (iii) propose QoS multipath forwarding (QMPF) model for paths diversity exploitation. NS2-based simulations proved the DQARE superiority in terms of delay, packet delivery ratio, throughput, and control overhead. Moreover, extensive simulations are used to compare the proposed QOPRA algorithm and QMPF model with their counterparts in the literature.

Towards Internet QoS Provisioning Based on Generic Distributed QoS Adaptive Routing Engine

PubMed Central

Haikal, Amira Y.; Badawy, M.; Ali, Hesham A.

2014-01-01

Increasing efficiency and quality demands of modern Internet technologies drive today's network engineers to seek to provide quality of service (QoS). Internet QoS provisioning gives rise to several challenging issues. This paper introduces a generic distributed QoS adaptive routing engine (DQARE) architecture based on OSPFxQoS. The innovation of the proposed work in this paper is its undependability on the used QoS architectures and, moreover, splitting of the control strategy from data forwarding mechanisms, so we guarantee a set of absolute stable mechanisms on top of which Internet QoS can be built. DQARE architecture is furnished with three relevant traffic control schemes, namely, service differentiation, QoS routing, and traffic engineering. The main objective of this paper is to (i) provide a general configuration guideline for service differentiation, (ii) formalize the theoretical properties of different QoS routing algorithms and then introduce a QoS routing algorithm (QOPRA) based on dynamic programming technique, and (iii) propose QoS multipath forwarding (QMPF) model for paths diversity exploitation. NS2-based simulations proved the DQARE superiority in terms of delay, packet delivery ratio, throughput, and control overhead. Moreover, extensive simulations are used to compare the proposed QOPRA algorithm and QMPF model with their counterparts in the literature. PMID:25309955

Multiplex networks in metropolitan areas: generic features and local effects

PubMed Central

Strano, Emanuele; Shai, Saray; Dobson, Simon; Barthelemy, Marc

2015-01-01

Most large cities are spanned by more than one transportation system. These different modes of transport have usually been studied separately: it is however important to understand the impact on urban systems of coupling different modes and we report in this paper an empirical analysis of the coupling between the street network and the subway for the two large metropolitan areas of London and New York. We observe a similar behaviour for network quantities related to quickest paths suggesting the existence of generic mechanisms operating beyond the local peculiarities of the specific cities studied. An analysis of the betweenness centrality distribution shows that the introduction of underground networks operate as a decentralizing force creating congestion in places located at the end of underground lines. Also, we find that increasing the speed of subways is not always beneficial and may lead to unwanted uneven spatial distributions of accessibility. In fact, for London—but not for New York—there is an optimal subway speed in terms of global congestion. These results show that it is crucial to consider the full, multimodal, multilayer network aspects of transportation systems in order to understand the behaviour of cities and to avoid possible negative side-effects of urban planning decisions. PMID:26400198

Comparative study of quality and efficacy of originator's and generic ABZ for the mass treatment of soil-transmitted nematode infections in Nepal

PubMed Central

Albonico, Marco; Mathema P., Pragya; Montresor, Antonio; Khakurel, Balkrishna; Reggi, Valerio; Pandey, Sharada; Savioli, Lorenzo

2017-01-01

Quality and efficacy of two locally-manufactured generic albendazole (ABZ) products (Curex and Royal Drug) used for de-worming children in Nepal since 1999 were tested against the originator product (GSK). The study conducted disintegration and dissolution testing and a randomised controlled clinical trial comparing cure rates (CR) and egg reduction rates (ERR) for Ascaris lumbricoides, Trichuris trichiura and hookworm infections. Stool samples from 1277 children were examined before and 21 days after treatment. For A. lumbricoides GSK's (97.0%) and Royal Drug's (95.0 %) product provided significantly higher CR than Curex's (82.6%); however, all products provided ERR higher than 90%. For T. trichiura Curex's product showed significantly lower ERR (63.2%). For hookworm, GSK's product performed significantly better (CR 74.3%, ERR 87.1%) than Royal Drug's (CR 53.3%, ERR 80.8%) and Curex's (CR 50.7%, ERR 73.1%). Only GSK's product passed both disintegration and dissolution. Both generic products failed dissolution. Curex's product showed poor disintegration. Despite its lower efficacy the cheaper Curex's product achieved good results in controlling morbidity due to soil-transmitted helminth (STH) infections. This study shows that cost-effectiveness of drugs used in mass de-worming campaigns should not be inferred on the basis of one single quality testing parameter. PMID:17129592

Influence of cooling rates and addition of Equex pasta on cooled and frozen-thawed semen of generic gray (Canis lupus) and Mexican gray wolves (C. l. baileyi).

PubMed

Zindl, C; Asa, C S; Günzel-Apel, A-R

2006-10-01

A current priority for the preservation of the endangered Mexican gray wolf (Canis lupus baileyi) is the development of a sperm-based genome resource bank for subsequent use in artificial insemination. To optimize the quality of cryopreserved sperm, the procedures involved in processing semen before and during freezing need to be improved. The aim of this study were to examine the effects of: (i) different cooling periods before freezing and (ii) addition of Equex pasta (Minitüb, Tübingen, Germany) on the characteristics of sperm from the generic gray wolf and the Mexican gray wolf after cooling and cryopreservation. For Mexican wolf sperm, cooling for 0.5 and 1.0 h had a less detrimental effect on cell morphology than cooling for 2.5 h, whereas the slower cooling rate (2.5 h) had a less detrimental effect on functional parameters and seemed to cause less damage to plasma membrane and acrosome integrity than 0.5 and 1.0 h. For the generic gray wolf, cooling semen for 2.5 h had less detrimental effect on plasma membrane integrity and viability; together with the 0.5 h cooling time, it yielded the highest percentages of intact acrosomes. As previously shown in the domestic dog, Equex pasta had no beneficial effect on sperm characteristics in either wolf species.

Fuzzy Logic Decoupled Lateral Control for General Aviation Airplanes

NASA Technical Reports Server (NTRS)

Duerksen, Noel

1997-01-01

It has been hypothesized that a human pilot uses the same set of generic skills to control a wide variety of aircraft. If this is true, then it should be possible to construct an electronic controller which embodies this generic skill set such that it can successfully control different airplanes without being matched to a specific airplane. In an attempt to create such a system, a fuzzy logic controller was devised to control aileron or roll spoiler position. This controller was used to control bank angle for both a piston powered single engine aileron equipped airplane simulation and a business jet simulation which used spoilers for primary roll control. Overspeed, stall and overbank protection were incorporated in the form of expert systems supervisors and weighted fuzzy rules. It was found that by using the artificial intelligence techniques of fuzzy logic and expert systems, a generic lateral controller could be successfully used on two general aviation aircraft types that have very different characteristics. These controllers worked for both airplanes over their entire flight envelopes. The controllers for both airplanes were identical except for airplane specific limits (maximum allowable airspeed, throttle ]ever travel, etc.). This research validated the fact that the same fuzzy logic based controller can control two very different general aviation airplanes. It also developed the basic controller architecture and specific control parameters required for such a general controller.

Learning about hydrothermal volcanic activity by modeling induced geophysical changes

NASA Astrophysics Data System (ADS)

Currenti, Gilda M.; Napoli, Rosalba

2017-05-01

Motivated by ongoing efforts to understand the nature and the energy potential of geothermal resources, we devise a coupled numerical model (hydrological, thermal, mechanical), which may help in the characterization and monitoring of hydrothermal systems through computational experiments. Hydrothermal areas in volcanic regions arise from a unique combination of geological and hydrological features which regulate the movement of fluids in the vicinity of magmatic sources capable of generating large quantities of steam and hot water. Numerical simulations help in understanding and characterizing rock-fluid interaction processes and the geophysical observations associated with them. Our aim is the quantification of the response of different geophysical observables (i.e. deformation, gravity and magnetic field) to hydrothermal activity on the basis of a sound geological framework (e.g. distribution and pathways of the flows, the presence of fractured zones, caprock). A detailed comprehension and quantification of the evolution and dynamics of the geothermal systems and the definition of their internal state through a geophysical modeling approach are essential to identify the key parameters for which the geothermal system may fulfill the requirements to be exploited as a source of energy. For the sake of illustration only, the numerical computations are focused on a conceptual model of the hydrothermal system of Vulcano Island by simulating a generic 1-year unrest and estimating different geophysical changes. We solved (i) the mass and energy balance equations of flow in porous media for temperature, pressure and density changes, (ii) the elastostatic equation for the deformation field and (iii) the Poisson’s equations for gravity and magnetic potential fields. Under the model assumptions, a generic unrest of 1-year engenders on the ground surface low amplitude changes in the investigated geophysical observables, that are, however, above the accuracies of the modern state-of-the-art instruments. Devising multidisciplinary and easy-to-use computational experiments enable us to learn how the hydrothermal system responds to un unrest and which fingerprints it may leave in the geophysical signals.

Perception of Generic Prescription Drugs and Utilization of Generic Drug Discount Programs

PubMed Central

Omojasola, Anthony; Hernandez, Mike; Sansgiry, Sujit; Jones, Lovell

2012-01-01

Objective Our study aimed to assess patient’s perceptions of generic drugs and utilization of generic drug discount programs. Design, Setting and Participants A survey was administered to adult participants at community health centers and community-based organizations in Houston, Texas, USA (n=525). Main Outcome Measures Multivariate logistic regression was used to quantify the strength of association between generic drug perception and utilization of generic drug discount programs. Results Respondents who agreed that “Generic prescription drugs are as effective as brand name prescription drugs,” were 3 times as likely to utilize generic drug discount programs (AOR: 3.0, 95% CI: 1.8–4.8, P<.001). Compared to non-Hispanic Whites, African Americans (OR: 10.2; 95% CI: 1.4–76.4) and Hispanics (OR: 10.3; 95% CI: 1.3–79.4) were 10 times as likely to agree that generic drugs have more side effects than brand name drugs. Conclusion Race/ethnicity had no impact in utilization of generic drug discount programs, despite racial disparities in perception toward generic drugs’ side effects and generic drugs being inferior to brand name drugs. PMID:23140080

Device-independent quantum key distribution

NASA Astrophysics Data System (ADS)

Hänggi, Esther

2010-12-01

In this thesis, we study two approaches to achieve device-independent quantum key distribution: in the first approach, the adversary can distribute any system to the honest parties that cannot be used to communicate between the three of them, i.e., it must be non-signalling. In the second approach, we limit the adversary to strategies which can be implemented using quantum physics. For both approaches, we show how device-independent quantum key distribution can be achieved when imposing an additional condition. In the non-signalling case this additional requirement is that communication is impossible between all pairwise subsystems of the honest parties, while, in the quantum case, we demand that measurements on different subsystems must commute. We give a generic security proof for device-independent quantum key distribution in these cases and apply it to an existing quantum key distribution protocol, thus proving its security even in this setting. We also show that, without any additional such restriction there always exists a successful joint attack by a non-signalling adversary.

Unraveling multiple changes in complex climate time series using Bayesian inference

NASA Astrophysics Data System (ADS)

Berner, Nadine; Trauth, Martin H.; Holschneider, Matthias

2016-04-01

Change points in time series are perceived as heterogeneities in the statistical or dynamical characteristics of observations. Unraveling such transitions yields essential information for the understanding of the observed system. The precise detection and basic characterization of underlying changes is therefore of particular importance in environmental sciences. We present a kernel-based Bayesian inference approach to investigate direct as well as indirect climate observations for multiple generic transition events. In order to develop a diagnostic approach designed to capture a variety of natural processes, the basic statistical features of central tendency and dispersion are used to locally approximate a complex time series by a generic transition model. A Bayesian inversion approach is developed to robustly infer on the location and the generic patterns of such a transition. To systematically investigate time series for multiple changes occurring at different temporal scales, the Bayesian inversion is extended to a kernel-based inference approach. By introducing basic kernel measures, the kernel inference results are composed into a proxy probability to a posterior distribution of multiple transitions. Thus, based on a generic transition model a probability expression is derived that is capable to indicate multiple changes within a complex time series. We discuss the method's performance by investigating direct and indirect climate observations. The approach is applied to environmental time series (about 100 a), from the weather station in Tuscaloosa, Alabama, and confirms documented instrumentation changes. Moreover, the approach is used to investigate a set of complex terrigenous dust records from the ODP sites 659, 721/722 and 967 interpreted as climate indicators of the African region of the Plio-Pleistocene period (about 5 Ma). The detailed inference unravels multiple transitions underlying the indirect climate observations coinciding with established global climate events.

Intra-generic and interspecific karyotype patterns of Leptodactylus and Adenomera (Anura, Leptodactylidae) with inclusion of five species from Central Amazonia.

PubMed

Coelho, Ana Carolina; de Mattos, Thais Lemos; Viana, Patrik; Terencio, Maria Leandra; Schneider, Carlos Henrique; Menin, Marcelo; Gross, Maria Claudia

2016-02-01

The genera Leptodactylus and Adenomera comprise 92 species distributed throughout the Neotropical region. These species have a modal diploid chromosome number 2n = 22. However, chromosome rearrangements are evident in the differentiation of five intra-generic groups in the genus Leptodactylus (L. fuscus, L. latrans, L. marmoratus (formally composed by the species of the genus Adenomera), L. melanonotus, L. pentadactylus), yet it is not clear if there is a karyotype pattern for each group. Aiming to understand the intra-generic and interspecific karyotype patterns of Leptodactylus and Adenomera, cytogenetic analyses were performed in A. andreae, L. macrosternum, L. pentadactylus, L. petersii, and L. riveroi using conventional staining, C-banding, nucleolus organizer region (NOR) and hybridization in situ fluorescent (FISH). The karyotype of Leptodactylus riveroi was described for the first time. Adenomera andreae had 2n = 26, while the remaining species 2n = 22. The NOR was found on pair No. 8 of A. andreae, L. macrosternum, L. pentadactylus, and L. riveroi, whereas L. petersii had it on pairs Nos. 6 and 10. These locations were confirmed by the FISH with 18S rDNA probe, except for pair No. 10 of L. petersii. The C-banding pattern was evident at the centromeres of chromosomes of all species and some interspecific variations were also observed. 2n = 22 was observed in the species of the L. latrans group, as well as in the intra-generic groups L. fuscus and L. pentadactylus; in the L. melanonotus group there were three diploid chromosome numbers 2n = 20, 22 and 24; and a larger variation in 2n was also evident in the L. marmoratus group.